# Translation file of Mandrake graphic install # Copyright (c) 2000 MandrakeSoft # Florin Grad , 1999-2000 # Dragos Marian Barbu , 2000 # msgid "" msgstr "" "Project-Id-Version: DrakX 7.1\n" "POT-Creation-Date: 2001-06-02 17:16+0200\n" "PO-Revision-Date: 2000-04-30 2:55+0200\n" "Last-Translator: Florin Grad \n" "Language-Team: romanian\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=iso-8859-2\n" "Content-Transfer-Encoding: 8bit\n" #: ../../Xconfigurator.pm_.c:232 msgid "Configure all heads independantly" msgstr "" #: ../../Xconfigurator.pm_.c:233 msgid "Use Xinerama extension" msgstr "" #: ../../Xconfigurator.pm_.c:236 #, c-format msgid "Configure only card \"%s\" (%s)" msgstr "" #: ../../Xconfigurator.pm_.c:239 #, fuzzy msgid "Multi-head configuration" msgstr "Citirea configurației" #: ../../Xconfigurator.pm_.c:240 msgid "" "Your system support multiple head configuration.\n" "What do you want to do?" msgstr "" #: ../../Xconfigurator.pm_.c:249 msgid "Graphic card" msgstr "Carte grafică" #: ../../Xconfigurator.pm_.c:249 msgid "Select a graphic card" msgstr "Alegeți o carte grafică" #: ../../Xconfigurator.pm_.c:250 msgid "Choose a X server" msgstr "Alegeți un server X" #: ../../Xconfigurator.pm_.c:250 msgid "X server" msgstr "Server X" #: ../../Xconfigurator.pm_.c:309 ../../Xconfigurator.pm_.c:316 #: ../../Xconfigurator.pm_.c:366 #, fuzzy, c-format msgid "XFree %s" msgstr "Server XFree86: %s" #: ../../Xconfigurator.pm_.c:312 #, fuzzy msgid "Which configuration of XFree do you want to have?" msgstr "Ce tip de intrări doriți să adăugați ?" #: ../../Xconfigurator.pm_.c:324 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" #: ../../Xconfigurator.pm_.c:326 ../../Xconfigurator.pm_.c:359 #, c-format msgid "Your card can have 3D hardware acceleration support with XFree %s." msgstr "" #: ../../Xconfigurator.pm_.c:328 ../../Xconfigurator.pm_.c:361 #, c-format msgid "XFree %s with 3D hardware acceleration" msgstr "" #: ../../Xconfigurator.pm_.c:336 ../../Xconfigurator.pm_.c:350 #, c-format msgid "" "Your card can have 3D hardware acceleration support with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" #: ../../Xconfigurator.pm_.c:338 ../../Xconfigurator.pm_.c:352 #, c-format msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" msgstr "" #: ../../Xconfigurator.pm_.c:347 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" #: ../../Xconfigurator.pm_.c:371 #, fuzzy msgid "XFree configuration" msgstr "Configurație post-install" #: ../../Xconfigurator.pm_.c:416 msgid "Select the memory size of your graphic card" msgstr "Alegeți memoria pentru cartea grafică" #: ../../Xconfigurator.pm_.c:463 msgid "Choose options for server" msgstr "Alegeți opțiunile pentru server" #: ../../Xconfigurator.pm_.c:480 msgid "Choose a monitor" msgstr "Alegeți un monitor" #: ../../Xconfigurator.pm_.c:480 msgid "Monitor" msgstr "Monitor" #: ../../Xconfigurator.pm_.c:483 msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" "Cei doi parametri critici sunt rata de actualizare verticală, care este " "rata\n" "la care întregul ecran e actualizat și mai important rata de sincronizare\n" "orizontală, care este rata la care liniile de scan sunt afișate.\n" "Este FOARTE IMPORTANT să nu specificați un tip de monitor cu interval de\n" "sincronizare care depășește capabilitățile monitorului vostru: puteți\n" "distruge monitorul în acest fel.\n" "Dacă nu sunteți sigur, alegeți parametri conservativi." #: ../../Xconfigurator.pm_.c:490 msgid "Horizontal refresh rate" msgstr "Rata de actualizare orizontală" #: ../../Xconfigurator.pm_.c:491 msgid "Vertical refresh rate" msgstr "Rata de actualizare verticală" #: ../../Xconfigurator.pm_.c:528 msgid "Monitor not configured" msgstr "Monitor nu a fost încă configurat" #: ../../Xconfigurator.pm_.c:531 msgid "Graphic card not configured yet" msgstr "Cartea grafică nu a fost configurată încă" #: ../../Xconfigurator.pm_.c:534 msgid "Resolutions not chosen yet" msgstr "Rezoluția nu a fost încă aleasă" #: ../../Xconfigurator.pm_.c:551 msgid "Do you want to test the configuration?" msgstr "Doriți să testați configurația ?" #: ../../Xconfigurator.pm_.c:555 #, fuzzy msgid "Warning: testing this graphic card may freeze your computer" msgstr "Atenție: testul e periculos pentru această carte grafică" #: ../../Xconfigurator.pm_.c:558 msgid "Test of the configuration" msgstr "Test de configurație" #: ../../Xconfigurator.pm_.c:597 msgid "" "\n" "try to change some parameters" msgstr "" "\n" "reîncercați după ce ați modificat ceva parametri" #: ../../Xconfigurator.pm_.c:597 msgid "An error has occurred:" msgstr "A apărut o eroare:" #: ../../Xconfigurator.pm_.c:619 #, c-format msgid "Leaving in %d seconds" msgstr "Testul se va termina în %d secunde" #: ../../Xconfigurator.pm_.c:630 msgid "Is this the correct setting?" msgstr "Configurația e corectă" #: ../../Xconfigurator.pm_.c:638 msgid "An error has occurred, try to change some parameters" msgstr "Eroare, reîncercați după ce ați modificat ceva parametri" #: ../../Xconfigurator.pm_.c:684 ../../printerdrake.pm_.c:277 #: ../../services.pm_.c:125 msgid "Resolution" msgstr "Rezoluție" #: ../../Xconfigurator.pm_.c:731 msgid "Choose the resolution and the color depth" msgstr "Alegeți rezoluția și culorile" #: ../../Xconfigurator.pm_.c:733 #, c-format msgid "Graphic card: %s" msgstr "Carte grafică: %s" #: ../../Xconfigurator.pm_.c:734 #, c-format msgid "XFree86 server: %s" msgstr "Server XFree86: %s" #: ../../Xconfigurator.pm_.c:750 ../../standalone/draknet_.c:280 #: ../../standalone/draknet_.c:283 #, fuzzy msgid "Expert Mode" msgstr "Expert" #: ../../Xconfigurator.pm_.c:751 msgid "Show all" msgstr "Afișați tot" #: ../../Xconfigurator.pm_.c:794 msgid "Resolutions" msgstr "Rezoluții" #: ../../Xconfigurator.pm_.c:1330 #, c-format msgid "Keyboard layout: %s\n" msgstr "Tastatura : %s\n" #: ../../Xconfigurator.pm_.c:1331 #, c-format msgid "Mouse type: %s\n" msgstr "Tip de mouse : %s\n" #: ../../Xconfigurator.pm_.c:1332 #, c-format msgid "Mouse device: %s\n" msgstr "Periferic pentru mouse: %s\n" #: ../../Xconfigurator.pm_.c:1333 #, c-format msgid "Monitor: %s\n" msgstr "Monitor: %s\n" #: ../../Xconfigurator.pm_.c:1334 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "Frecvența orizontala pentru monitor : %s\n" #: ../../Xconfigurator.pm_.c:1335 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "Frecvența verticala pentru monitor : %s\n" #: ../../Xconfigurator.pm_.c:1336 #, c-format msgid "Graphic card: %s\n" msgstr "Carte grafică : %s\n" #: ../../Xconfigurator.pm_.c:1337 #, c-format msgid "Graphic memory: %s kB\n" msgstr "Memorie grafică : %s KB\n" #: ../../Xconfigurator.pm_.c:1339 #, fuzzy, c-format msgid "Color depth: %s\n" msgstr "Opțiuni pentru culori:" #: ../../Xconfigurator.pm_.c:1340 #, fuzzy, c-format msgid "Resolution: %s\n" msgstr "Rezoluții" #: ../../Xconfigurator.pm_.c:1342 #, c-format msgid "XFree86 server: %s\n" msgstr "Server XFree86 : %s\n" #: ../../Xconfigurator.pm_.c:1343 #, fuzzy, c-format msgid "XFree86 driver: %s\n" msgstr "Server XFree86 : %s\n" #: ../../Xconfigurator.pm_.c:1362 msgid "Preparing X-Window configuration" msgstr "Pregătesc configurația X-Window" #: ../../Xconfigurator.pm_.c:1382 msgid "What do you want to do?" msgstr "Ce doriți să faceți ?" #: ../../Xconfigurator.pm_.c:1387 msgid "Change Monitor" msgstr "Alegeți un alt tip de monitor" #: ../../Xconfigurator.pm_.c:1388 msgid "Change Graphic card" msgstr "Alegeți un alt tip de carte grafică" #: ../../Xconfigurator.pm_.c:1390 msgid "Change Server options" msgstr "Schimbați opțiunile server-ului" #: ../../Xconfigurator.pm_.c:1391 msgid "Change Resolution" msgstr "Alegeți o altă rezoluție" #: ../../Xconfigurator.pm_.c:1392 msgid "Show information" msgstr "Afișează informațiile" #: ../../Xconfigurator.pm_.c:1393 msgid "Test again" msgstr "Testează din nou" #: ../../Xconfigurator.pm_.c:1394 ../../bootlook.pm_.c:238 msgid "Quit" msgstr "Ieșire" #: ../../Xconfigurator.pm_.c:1402 #, fuzzy, c-format msgid "" "Keep the changes?\n" "Current configuration is:\n" "\n" "%s" msgstr "Pastrați configurația IP curentă" #: ../../Xconfigurator.pm_.c:1423 #, c-format msgid "Please relog into %s to activate the changes" msgstr "Vă rog reconectați-vă ca %s pentru a activa schimbările" #: ../../Xconfigurator.pm_.c:1443 msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "Vă rog delogați-vă și folosiți Ctrl-Alt-BackSpace" #: ../../Xconfigurator.pm_.c:1446 msgid "X at startup" msgstr "Sever X la demaraj" #: ../../Xconfigurator.pm_.c:1447 msgid "" "I can set up your computer to automatically start X upon booting.\n" "Would you like X to start when you reboot?" msgstr "" "Pot să configurez calculatorul sa demareze automat X la demaraj.\n" "Doriți sa demarați X cînd redemarați ?" #: ../../Xconfigurator_consts.pm_.c:6 msgid "256 colors (8 bits)" msgstr "256 de culori (8 biți)" #: ../../Xconfigurator_consts.pm_.c:7 msgid "32 thousand colors (15 bits)" msgstr "32 mii de culori (15 biți)" #: ../../Xconfigurator_consts.pm_.c:8 msgid "65 thousand colors (16 bits)" msgstr "65 mii de culori (16 biți)" #: ../../Xconfigurator_consts.pm_.c:9 msgid "16 million colors (24 bits)" msgstr "16 milioane de culori (24 biți)" #: ../../Xconfigurator_consts.pm_.c:10 msgid "4 billion colors (32 bits)" msgstr "4 miliarde de culori (32 biți)" #: ../../Xconfigurator_consts.pm_.c:106 msgid "256 kB" msgstr "256 kB" #: ../../Xconfigurator_consts.pm_.c:107 msgid "512 kB" msgstr "512 kB" #: ../../Xconfigurator_consts.pm_.c:108 msgid "1 MB" msgstr "1 MB" #: ../../Xconfigurator_consts.pm_.c:109 msgid "2 MB" msgstr "2 MB" #: ../../Xconfigurator_consts.pm_.c:110 msgid "4 MB" msgstr "4 MB" #: ../../Xconfigurator_consts.pm_.c:111 msgid "8 MB" msgstr "8 MB" #: ../../Xconfigurator_consts.pm_.c:112 msgid "16 MB or more" msgstr "16 MB sau mai mult" #: ../../Xconfigurator_consts.pm_.c:120 msgid "Standard VGA, 640x480 at 60 Hz" msgstr "Standard VGA, 640x480 la 60 Hz" #: ../../Xconfigurator_consts.pm_.c:121 msgid "Super VGA, 800x600 at 56 Hz" msgstr "Super VGA, 800x600 la 56 Hz" #: ../../Xconfigurator_consts.pm_.c:122 msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)" msgstr "8514 Compatibil, 1024x768 la 87 Hz întrețesut (nu 800x600)" #: ../../Xconfigurator_consts.pm_.c:123 msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz" msgstr "Super VGA, 1024x768 la 87 Hz întrețesut, 800x600 la 56 Hz" #: ../../Xconfigurator_consts.pm_.c:124 msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz" msgstr "Super VGA Extins, 800x600 la 60 Hz, 640x480 la 72 Hz" #: ../../Xconfigurator_consts.pm_.c:125 msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz" msgstr "Ne-Întrețesut SVGA, 1024x768 la 60 Hz, 800x600 la 72 Hz" #: ../../Xconfigurator_consts.pm_.c:126 msgid "High Frequency SVGA, 1024x768 at 70 Hz" msgstr "Înaltă frecvență SVGA, 1024x768 la 70 Hz" #: ../../Xconfigurator_consts.pm_.c:127 msgid "Multi-frequency that can do 1280x1024 at 60 Hz" msgstr "Multi-frecvență care e capabil de 1280x1024 la 60 Hz" #: ../../Xconfigurator_consts.pm_.c:128 msgid "Multi-frequency that can do 1280x1024 at 74 Hz" msgstr "Multi-frecvență care e capabil de 1280x1024 la 74 Hz" #: ../../Xconfigurator_consts.pm_.c:129 msgid "Multi-frequency that can do 1280x1024 at 76 Hz" msgstr "Multi-frecvență care e capabil de 1280x1024 la 76 Hz" #: ../../Xconfigurator_consts.pm_.c:130 msgid "Monitor that can do 1600x1200 at 70 Hz" msgstr "Monitor care e capabil de 1600x1200 la 70 Hz" #: ../../Xconfigurator_consts.pm_.c:131 msgid "Monitor that can do 1600x1200 at 76 Hz" msgstr "Monitor care e capabil de 1600x1200 la 76 Hz" #: ../../any.pm_.c:99 ../../any.pm_.c:124 msgid "First sector of boot partition" msgstr "Primul sector al partiției de demaraj" #: ../../any.pm_.c:99 ../../any.pm_.c:124 ../../any.pm_.c:197 msgid "First sector of drive (MBR)" msgstr "Primul sector al discului (MBR)" #: ../../any.pm_.c:103 #, fuzzy msgid "SILO Installation" msgstr "Instalare LILO/grub" #: ../../any.pm_.c:104 ../../any.pm_.c:117 msgid "Where do you want to install the bootloader?" msgstr "Unde doriți să instalați Gestionarul de demaraj ?" #: ../../any.pm_.c:116 msgid "LILO/grub Installation" msgstr "Instalare LILO/grub" #: ../../any.pm_.c:128 ../../any.pm_.c:142 msgid "SILO" msgstr "" #: ../../any.pm_.c:130 msgid "LILO with text menu" msgstr "" #: ../../any.pm_.c:131 ../../any.pm_.c:142 msgid "LILO with graphical menu" msgstr "" #: ../../any.pm_.c:134 msgid "Grub" msgstr "" #: ../../any.pm_.c:138 msgid "Boot from DOS/Windows (loadlin)" msgstr "" #: ../../any.pm_.c:140 ../../any.pm_.c:142 #, fuzzy msgid "Yaboot" msgstr "Root" #: ../../any.pm_.c:148 ../../any.pm_.c:180 msgid "Bootloader main options" msgstr "Opțiunile principale ale gestionarului de demaraj" #: ../../any.pm_.c:149 ../../any.pm_.c:181 #, fuzzy msgid "Bootloader to use" msgstr "Opțiunile principale ale gestionarului de demaraj" #: ../../any.pm_.c:151 #, fuzzy msgid "Bootloader installation" msgstr "Opțiunile principale ale gestionarului de demaraj" #: ../../any.pm_.c:153 ../../any.pm_.c:183 msgid "Boot device" msgstr "Periferic de demaraj" #: ../../any.pm_.c:154 msgid "LBA (doesn't work on old BIOSes)" msgstr "LBA (nu funcționează cu BIOS-urile vechi)" #: ../../any.pm_.c:155 msgid "Compact" msgstr "Compact" #: ../../any.pm_.c:155 msgid "compact" msgstr "compact" #: ../../any.pm_.c:156 ../../any.pm_.c:256 msgid "Video mode" msgstr "Mod video" #: ../../any.pm_.c:158 msgid "Delay before booting default image" msgstr "Timp de așteptare înaintea demarării imaginii standard" #: ../../any.pm_.c:160 ../../any.pm_.c:741 #: ../../install_steps_interactive.pm_.c:904 ../../netconnect.pm_.c:629 #: ../../printerdrake.pm_.c:98 ../../printerdrake.pm_.c:132 #: ../../standalone/draknet_.c:569 msgid "Password" msgstr "Parola" #: ../../any.pm_.c:161 ../../any.pm_.c:742 #: ../../install_steps_interactive.pm_.c:905 msgid "Password (again)" msgstr "Parola (din nou)" #: ../../any.pm_.c:162 msgid "Restrict command line options" msgstr "Limitează opțiunile liniei de comandă" #: ../../any.pm_.c:162 msgid "restrict" msgstr "limitează" #: ../../any.pm_.c:164 msgid "Clean /tmp at each boot" msgstr "Curăță /tmp la fiecare demaraj" #: ../../any.pm_.c:165 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "Precizează cantintatea de RAM dacă e necesar (am găsit %d MB)" #: ../../any.pm_.c:167 msgid "Enable multi profiles" msgstr "Activează profilurile multiple" #: ../../any.pm_.c:171 msgid "Give the ram size in MB" msgstr "Introduceți cantintatea de RAM în MB" #: ../../any.pm_.c:173 msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "" "Opțiunea ``Limitează opțiunile liniei de comandă'' e inutilă fără parolă" #: ../../any.pm_.c:174 ../../any.pm_.c:718 #: ../../install_steps_interactive.pm_.c:899 msgid "Please try again" msgstr "Încercați din nou" #: ../../any.pm_.c:174 ../../any.pm_.c:718 #: ../../install_steps_interactive.pm_.c:899 msgid "The passwords do not match" msgstr "Parolele nu corespund" #: ../../any.pm_.c:182 msgid "Init Message" msgstr "" #: ../../any.pm_.c:184 msgid "Open Firmware Delay" msgstr "" #: ../../any.pm_.c:185 msgid "Kernel Boot Timeout" msgstr "" #: ../../any.pm_.c:186 msgid "Enable CD Boot?" msgstr "" #: ../../any.pm_.c:187 msgid "Enable OF Boot?" msgstr "" #: ../../any.pm_.c:188 #, fuzzy msgid "Default OS?" msgstr "Standard" #: ../../any.pm_.c:210 msgid "" "Here are the different entries.\n" "You can add some more or change the existing ones." msgstr "" "Acestea sunt diferitele intrările.\n" "Puteți să mai adăugați și altele sau să schimbați cele existente." #: ../../any.pm_.c:220 ../../printerdrake.pm_.c:356 msgid "Add" msgstr "Adaugă" #: ../../any.pm_.c:220 ../../any.pm_.c:729 ../../diskdrake.pm_.c:46 #: ../../printerdrake.pm_.c:356 msgid "Done" msgstr "Gata" #: ../../any.pm_.c:220 #, fuzzy msgid "Modify" msgstr "Modifică RAID" #: ../../any.pm_.c:228 msgid "Which type of entry do you want to add?" msgstr "Ce tip de intrări doriți să adăugați ?" #: ../../any.pm_.c:229 msgid "Linux" msgstr "Linux" #: ../../any.pm_.c:229 msgid "Other OS (SunOS...)" msgstr "Alt SO (SunOS...)" #: ../../any.pm_.c:230 msgid "Other OS (MacOS...)" msgstr "Alt SO (MacOS...)" #: ../../any.pm_.c:230 msgid "Other OS (windows...)" msgstr "Alt SO (windows...)" #: ../../any.pm_.c:250 ../../any.pm_.c:252 msgid "Image" msgstr "Imagine" #: ../../any.pm_.c:253 ../../any.pm_.c:264 msgid "Root" msgstr "Root" #: ../../any.pm_.c:254 ../../any.pm_.c:283 msgid "Append" msgstr "Append" #: ../../any.pm_.c:258 msgid "Initrd" msgstr "Initrd" #: ../../any.pm_.c:259 msgid "Read-write" msgstr "Citește-Scrie" #: ../../any.pm_.c:266 msgid "Table" msgstr "Tabel" #: ../../any.pm_.c:267 msgid "Unsafe" msgstr "Nesigur" #: ../../any.pm_.c:274 ../../any.pm_.c:279 ../../any.pm_.c:282 msgid "Label" msgstr "Etichetă" #: ../../any.pm_.c:276 ../../any.pm_.c:287 msgid "Default" msgstr "Standard" #: ../../any.pm_.c:284 #, fuzzy msgid "Initrd-size" msgstr "Initrd" #: ../../any.pm_.c:286 msgid "NoVideo" msgstr "" #: ../../any.pm_.c:294 msgid "Remove entry" msgstr "Șterge intrarea" #: ../../any.pm_.c:297 msgid "Empty label not allowed" msgstr "Eticheta goală nu e permisă" #: ../../any.pm_.c:298 msgid "This label is already used" msgstr "Această etichetă nu e permisă" #: ../../any.pm_.c:317 #, fuzzy msgid "What type of partitioning?" msgstr "Ce tip de imprimanta aveți?" #: ../../any.pm_.c:608 #, c-format msgid "Found %s %s interfaces" msgstr "Am găsit interfațele %s %s" #: ../../any.pm_.c:609 msgid "Do you have another one?" msgstr "Aveți o altă interfața?" #: ../../any.pm_.c:610 #, c-format msgid "Do you have any %s interfaces?" msgstr "Aveți vreo interfață %s ?" #: ../../any.pm_.c:612 ../../interactive.pm_.c:104 ../../my_gtk.pm_.c:616 #: ../../printerdrake.pm_.c:237 msgid "No" msgstr "Nu" #: ../../any.pm_.c:612 ../../interactive.pm_.c:104 ../../my_gtk.pm_.c:616 msgid "Yes" msgstr "Da" #: ../../any.pm_.c:613 msgid "See hardware info" msgstr "Vezi info hardware" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: ../../any.pm_.c:648 #, c-format msgid "Installing driver for %s card %s" msgstr "Instalarea pilotului pentru %s cartea %s" #: ../../any.pm_.c:649 #, c-format msgid "(module %s)" msgstr "(modul %s)" #. -PO: the %s is the driver type (scsi, network, sound,...) #: ../../any.pm_.c:660 #, c-format msgid "Which %s driver should I try?" msgstr "Care %s pilot să încerc?" #: ../../any.pm_.c:668 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" "În anumite cazuri, pilotul %s necesită informații suplimentare pentru a\n" "funcționa corect, dar funcționează bine și fără. Doriți să specificați\n" "opțiuni suplimentare sau îi permiteți să interogheze calculatorul pentru\n" "informațiile necesare? Ocazional, interogarea poate bloca calculatorul,\n" "dar n-ar trebui să produce nici o deteriorare." #: ../../any.pm_.c:673 msgid "Autoprobe" msgstr "Autoprobează" #: ../../any.pm_.c:673 msgid "Specify options" msgstr "Specificați opțiunile" #: ../../any.pm_.c:677 #, c-format msgid "You may now provide its options to module %s." msgstr "Puteți furniza acum opțiunile modulului %s." #: ../../any.pm_.c:683 #, c-format msgid "" "You may now provide its options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "Puteți furniza acum opțiunile modulului %s.\n" "Opțiunile sunt în formatul ``nume=valoare nume2=valoare2 ...''.\n" "de exemplu, ``io=0x300 irq=7''" #: ../../any.pm_.c:686 msgid "Module options:" msgstr "Opțiuni pentru module:" #: ../../any.pm_.c:697 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "Încăcarea modulului %s a eșuat.\n" "Doriți săîncercați cu alți parametri ?" #: ../../any.pm_.c:715 #, c-format msgid "(already added %s)" msgstr "(deja adăugat %s)" #: ../../any.pm_.c:719 msgid "This password is too simple" msgstr "Aceasta parolă e prea simplă" #: ../../any.pm_.c:720 msgid "Please give a user name" msgstr "Va rog înscrieți numele utilizatorului" #: ../../any.pm_.c:721 msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "" "Numele utilizatorului trebuie sa conțină numai caractere minuscule, numere, " "`-' și `_'" #: ../../any.pm_.c:722 msgid "This user name is already added" msgstr "Acest nume de utilizator e deja adăugat" #: ../../any.pm_.c:726 msgid "Add user" msgstr "Adăugați un utilizator" #: ../../any.pm_.c:727 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "Intrați un utilizator\n" "%s" #: ../../any.pm_.c:728 msgid "Accept user" msgstr "Acceptare utilizator" #: ../../any.pm_.c:739 msgid "Real name" msgstr "Nume real" #: ../../any.pm_.c:740 ../../printerdrake.pm_.c:97 #: ../../printerdrake.pm_.c:131 msgid "User name" msgstr "Numele utilizatorului" #: ../../any.pm_.c:743 msgid "Shell" msgstr "Shell" #: ../../any.pm_.c:745 msgid "Icon" msgstr "Icoană" #: ../../any.pm_.c:766 msgid "Autologin" msgstr "" #: ../../any.pm_.c:767 #, fuzzy msgid "" "I can set up your computer to automatically log on one user.\n" "If you don't want to use this feature, click on the cancel button." msgstr "" "Pot să configurez calculatorul sa demareze automat X la demaraj.\n" "Doriți sa demarați X cînd redemarați ?" #: ../../any.pm_.c:769 #, fuzzy msgid "Choose the default user:" msgstr "Alegeți noua mărime" #: ../../any.pm_.c:770 #, fuzzy msgid "Choose the window manager to run:" msgstr "Alegeți unealta pe care doriți să o folosiți" # NOTE: this message will be displayed at boot time; that is # only the ascii charset will be available on most machines # so use only 7bit for this message (and do transliteration or # leave it in English, as it is the best for your language) # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: ../../bootloader.pm_.c:262 ../../bootloader.pm_.c:608 #, fuzzy, c-format msgid "" "Welcome to %s the operating system chooser!\n" "\n" "Choose an operating system in the list above or\n" "wait %d seconds for default boot.\n" "\n" msgstr "" "Bun venit la gestionarul de sisteme de operare %s!\n" "\n" "Pentru a afisa diferitele posibilitati, apasati .\n" "\n" "Pentru a demara unul dintre ele, scrieti-i numele si apasati sau\n" "asteptati %d secunde pentru demararea din oficiu.\n" "\n" # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:809 msgid "Welcome to GRUB the operating system chooser!" msgstr "Bun venit la gestionarul de sisteme de operare GRUB!" # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:812 #, c-format msgid "Use the %c and %c keys for selecting which entry is highlighted." msgstr "Folositi tastele %c si %c pentru selectarea intrarii puse in evidenta." # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:815 msgid "Press enter to boot the selected OS, 'e' to edit the" msgstr "Apasati enter pentru a demara OS-ul selectat, 'e' pentru a edita" # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:818 msgid "commands before booting, or 'c' for a command-line." msgstr "comandele inainte de a demara, sau 'c' pentru linia de comanda." # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:821 #, c-format msgid "The highlighted entry will be booted automatically in %d seconds." msgstr "Intrarea selectata va demara dupa %d secunde" #: ../../bootloader.pm_.c:825 msgid "not enough room in /boot" msgstr "nu e destul spațiu în /boot" #. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows #. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language #: ../../bootloader.pm_.c:918 msgid "Desktop" msgstr "Desktop" #. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows #: ../../bootloader.pm_.c:920 msgid "Start Menu" msgstr "Meniu de Start" #: ../../bootlook.pm_.c:46 msgid "no help implemented yet.\n" msgstr "" #: ../../bootlook.pm_.c:62 #, fuzzy msgid "Boot Style Configuration" msgstr "Configurație post-install" #: ../../bootlook.pm_.c:79 #, fuzzy msgid "/_File" msgstr "Fișiere:\n" #: ../../bootlook.pm_.c:81 msgid "/File/_New" msgstr "" #: ../../bootlook.pm_.c:82 msgid "N" msgstr "" #: ../../bootlook.pm_.c:84 msgid "/File/_Open" msgstr "" #: ../../bootlook.pm_.c:85 msgid "O" msgstr "" #: ../../bootlook.pm_.c:87 msgid "/File/_Save" msgstr "" #: ../../bootlook.pm_.c:88 msgid "S" msgstr "" #: ../../bootlook.pm_.c:90 msgid "/File/Save _As" msgstr "" #: ../../bootlook.pm_.c:91 msgid "/File/-" msgstr "" #: ../../bootlook.pm_.c:93 msgid "/File/_Quit" msgstr "" #: ../../bootlook.pm_.c:94 msgid "Q" msgstr "" #: ../../bootlook.pm_.c:96 msgid "/_Options" msgstr "" #: ../../bootlook.pm_.c:98 msgid "/Options/Test" msgstr "" #: ../../bootlook.pm_.c:99 #, fuzzy msgid "/_Help" msgstr "Ajutor" #: ../../bootlook.pm_.c:101 msgid "/Help/_About..." msgstr "" #: ../../bootlook.pm_.c:111 ../../standalone/drakgw_.c:634 #: ../../standalone/draknet_.c:262 ../../standalone/tinyfirewall_.c:57 #, fuzzy msgid "Configure" msgstr "Configurați X" #: ../../bootlook.pm_.c:114 #, fuzzy, c-format msgid "" "You are currently using %s as Boot Manager.\n" "Click on Configure to launch the setup wizard." msgstr "Selectați Conexiunea de imprimantă" #: ../../bootlook.pm_.c:121 #, fuzzy msgid "Lilo/grub mode" msgstr "Nume de domeniu" #: ../../bootlook.pm_.c:131 msgid "NewStyle Categorizing Monitor" msgstr "" #: ../../bootlook.pm_.c:134 #, fuzzy msgid "NewStyle Monitor" msgstr "Monitor" #: ../../bootlook.pm_.c:137 #, fuzzy msgid "Traditional Monitor" msgstr "Alegeți un alt tip de monitor" #: ../../bootlook.pm_.c:140 msgid "Traditional Gtk+ Monitor" msgstr "" #: ../../bootlook.pm_.c:144 msgid "Launch Aurora at boot time" msgstr "" #: ../../bootlook.pm_.c:169 #, fuzzy msgid "Boot mode" msgstr "Periferic de demaraj" #: ../../bootlook.pm_.c:179 msgid "Launch the X-Window system at start" msgstr "" #: ../../bootlook.pm_.c:187 msgid "No, I don't want autologin" msgstr "" #: ../../bootlook.pm_.c:193 msgid "Yes, I want autologin with this (user, desktop)" msgstr "" #: ../../bootlook.pm_.c:210 msgid "System mode" msgstr "" #: ../../bootlook.pm_.c:228 #, fuzzy msgid "Default Runlevel" msgstr "Standard" #: ../../bootlook.pm_.c:236 ../../standalone/draknet_.c:88 #: ../../standalone/draknet_.c:120 ../../standalone/draknet_.c:184 #: ../../standalone/draknet_.c:302 ../../standalone/draknet_.c:396 #: ../../standalone/draknet_.c:473 ../../standalone/draknet_.c:509 #: ../../standalone/draknet_.c:617 msgid "OK" msgstr "" #: ../../bootlook.pm_.c:238 ../../install_steps_gtk.pm_.c:576 #: ../../interactive.pm_.c:114 ../../interactive.pm_.c:269 #: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:357 #: ../../my_gtk.pm_.c:360 ../../my_gtk.pm_.c:617 #: ../../standalone/drakgw_.c:639 ../../standalone/draknet_.c:95 #: ../../standalone/draknet_.c:127 ../../standalone/draknet_.c:295 #: ../../standalone/draknet_.c:485 ../../standalone/draknet_.c:631 #: ../../standalone/tinyfirewall_.c:63 msgid "Cancel" msgstr "Anulează" #: ../../bootlook.pm_.c:315 msgid "can not open /etc/inittab for reading: $!" msgstr "" #: ../../bootlook.pm_.c:369 msgid "can not open /etc/sysconfig/autologin for reading: $!" msgstr "" #: ../../bootlook.pm_.c:435 ../../standalone/drakboot_.c:47 msgid "Installation of LILO failed. The following error occured:" msgstr "Instalarea lui LILO a eșuat. Următoarea eroare a apărut:" #: ../../diskdrake.pm_.c:21 ../../diskdrake.pm_.c:462 msgid "Create" msgstr "Crează" #: ../../diskdrake.pm_.c:22 msgid "Unmount" msgstr "Demontează" #: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:464 msgid "Delete" msgstr "Șterge" #: ../../diskdrake.pm_.c:23 msgid "Format" msgstr "Formatează" #: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:653 msgid "Resize" msgstr "Redimensionează" #: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:462 #: ../../diskdrake.pm_.c:518 msgid "Type" msgstr "Tip" #: ../../diskdrake.pm_.c:24 ../../diskdrake.pm_.c:539 msgid "Mount point" msgstr "Punct de montaj" #: ../../diskdrake.pm_.c:38 msgid "Write /etc/fstab" msgstr "Scrie /etc/fstab" #: ../../diskdrake.pm_.c:39 msgid "Toggle to expert mode" msgstr "Trece în mod expert" #: ../../diskdrake.pm_.c:40 msgid "Toggle to normal mode" msgstr "Trece în mod normal" #: ../../diskdrake.pm_.c:41 msgid "Restore from file" msgstr "Restaurează din fișierul" #: ../../diskdrake.pm_.c:42 msgid "Save in file" msgstr "Înregistrează în fișierul" #: ../../diskdrake.pm_.c:43 msgid "Wizard" msgstr "" #: ../../diskdrake.pm_.c:44 msgid "Restore from floppy" msgstr "Restaurează din dischetă" #: ../../diskdrake.pm_.c:45 msgid "Save on floppy" msgstr "Înregistreaza pe dischetă" #: ../../diskdrake.pm_.c:49 msgid "Clear all" msgstr "Șterge tot" #: ../../diskdrake.pm_.c:54 msgid "Format all" msgstr "Formatează tot" #: ../../diskdrake.pm_.c:55 msgid "Auto allocate" msgstr "Auto aloca" #: ../../diskdrake.pm_.c:59 msgid "All primary partitions are used" msgstr "Toate partițiile principale sunt alocate" #: ../../diskdrake.pm_.c:59 msgid "I can't add any more partition" msgstr "Imposibil de adăugat o alta partiție" #: ../../diskdrake.pm_.c:59 msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" "Pentru a avea mai multe partiții, ștergeți una pentru a putea crea una de " "tip Extended " #: ../../diskdrake.pm_.c:61 msgid "Not enough space for auto-allocating" msgstr "" #: ../../diskdrake.pm_.c:63 msgid "Undo" msgstr "Anulează" #: ../../diskdrake.pm_.c:64 msgid "Write partition table" msgstr "Scrie tabloul de partiții" #: ../../diskdrake.pm_.c:65 ../../install_steps_interactive.pm_.c:185 #, fuzzy msgid "More" msgstr "Deplasează" #: ../../diskdrake.pm_.c:116 msgid "Ext2" msgstr "Ext2" #: ../../diskdrake.pm_.c:116 msgid "FAT" msgstr "FAT" #: ../../diskdrake.pm_.c:116 msgid "HFS" msgstr "HFS" #: ../../diskdrake.pm_.c:116 msgid "SunOS" msgstr "" #: ../../diskdrake.pm_.c:116 msgid "Swap" msgstr "Swap" #: ../../diskdrake.pm_.c:117 msgid "Empty" msgstr "Gol" #: ../../diskdrake.pm_.c:117 ../../install_steps_gtk.pm_.c:407 #: ../../mouse.pm_.c:145 msgid "Other" msgstr "Alt tip" #: ../../diskdrake.pm_.c:123 msgid "Filesystem types:" msgstr "Tipul de fișiere sistem: " #: ../../diskdrake.pm_.c:132 ../../install_steps_gtk.pm_.c:577 msgid "Details" msgstr "Detalii" #: ../../diskdrake.pm_.c:147 msgid "" "You have one big FAT partition\n" "(generally used by MicroSoft Dos/Windows).\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "Aveți o singură partiție mare FAT\n" "(în general folosită de MicroSoft Dos/Windows).\n" "Va sugerez să redimensionați mai întîi acea partiție\n" "faceți clic pe ea și apoi pe \"Redimensionează\")" #: ../../diskdrake.pm_.c:152 msgid "Please make a backup of your data first" msgstr "Vă rog faceți mai întîi o copie a datelor dumneavoastră" #: ../../diskdrake.pm_.c:152 ../../diskdrake.pm_.c:170 #: ../../diskdrake.pm_.c:179 ../../diskdrake.pm_.c:570 #: ../../diskdrake.pm_.c:592 msgid "Read carefully!" msgstr "Citiți cu atenție!" #: ../../diskdrake.pm_.c:155 msgid "" "If you plan to use aboot, be carefull to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" "Dacă doriți să folosiți aboot, asigurați-vă să lăsați un spațiu liber\n" "(2048 de sectoare sunt de ajuns) la începutul discului" #: ../../diskdrake.pm_.c:170 msgid "Be careful: this operation is dangerous." msgstr "Atenție: aceasta operație e periculoasă." #: ../../diskdrake.pm_.c:214 ../../install_steps.pm_.c:72 #: ../../install_steps_interactive.pm_.c:37 #: ../../install_steps_interactive.pm_.c:322 ../../standalone/diskdrake_.c:66 msgid "Error" msgstr "Eroare" #: ../../diskdrake.pm_.c:238 ../../diskdrake.pm_.c:748 msgid "Mount point: " msgstr "Punct de montaj: " #: ../../diskdrake.pm_.c:239 ../../diskdrake.pm_.c:298 msgid "Device: " msgstr "Periferic: " #: ../../diskdrake.pm_.c:240 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "Litera perifericului DOS: %s (doar o presupunere)\n" #: ../../diskdrake.pm_.c:244 ../../diskdrake.pm_.c:251 #: ../../diskdrake.pm_.c:301 msgid "Type: " msgstr "Tip: " #: ../../diskdrake.pm_.c:248 msgid "Name: " msgstr "Nume: " #: ../../diskdrake.pm_.c:253 #, c-format msgid "Start: sector %s\n" msgstr "Start: sector %s\n" #: ../../diskdrake.pm_.c:254 #, c-format msgid "Size: %s" msgstr "Mărimea: %s" #: ../../diskdrake.pm_.c:256 #, c-format msgid ", %s sectors" msgstr ", %s sectori" #: ../../diskdrake.pm_.c:258 #, c-format msgid "Cylinder %d to cylinder %d\n" msgstr "De la cilindrul %d la cilindrul %d\n" #: ../../diskdrake.pm_.c:259 msgid "Formatted\n" msgstr "Formatat\n" #: ../../diskdrake.pm_.c:260 msgid "Not formatted\n" msgstr "Neformatat\n" #: ../../diskdrake.pm_.c:261 msgid "Mounted\n" msgstr "Montat\n" #: ../../diskdrake.pm_.c:262 #, c-format msgid "RAID md%s\n" msgstr "RAID md%s\n" #: ../../diskdrake.pm_.c:264 #, c-format msgid "Loopback file(s): %s\n" msgstr "Fișier(e) loopback: %s\n" #: ../../diskdrake.pm_.c:265 msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "Partiția demarată din oficiu\n" " (pentru demaraj MS-DOS, nu pentru lilo)\n" #: ../../diskdrake.pm_.c:267 #, c-format msgid "Level %s\n" msgstr "Nivel %s\n" #: ../../diskdrake.pm_.c:268 #, c-format msgid "Chunk size %s\n" msgstr "Mărimea porțiunii %s\n" #: ../../diskdrake.pm_.c:269 #, c-format msgid "RAID-disks %s\n" msgstr "Discuri-RAID %s\n" #: ../../diskdrake.pm_.c:271 #, c-format msgid "Loopback file name: %s" msgstr "Numele fișierului loopback: %s" #: ../../diskdrake.pm_.c:274 msgid "" "\n" "Chances are, this partition is\n" "a Driver partition, you should\n" "probably leave it alone.\n" msgstr "" #: ../../diskdrake.pm_.c:277 msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" #: ../../diskdrake.pm_.c:294 msgid "Please click on a partition" msgstr "Vă rog faceți clic pe o partiție" #: ../../diskdrake.pm_.c:299 #, c-format msgid "Size: %s\n" msgstr "Mărime: %s\n" #: ../../diskdrake.pm_.c:300 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "Geometrie: %s cylinders, %s heads, %s sectors\n" #: ../../diskdrake.pm_.c:302 #, c-format msgid "LVM-disks %s\n" msgstr "Discuri-LVM %s\n" #: ../../diskdrake.pm_.c:303 #, c-format msgid "Partition table type: %s\n" msgstr "Tipul tabloul de partiții : %s\n" #: ../../diskdrake.pm_.c:304 #, c-format msgid "on bus %d id %d\n" msgstr "pe bus-ul %d id %d\n" #: ../../diskdrake.pm_.c:320 msgid "Mount" msgstr "Montaj" #: ../../diskdrake.pm_.c:322 msgid "Active" msgstr "Activ" #: ../../diskdrake.pm_.c:324 msgid "Add to RAID" msgstr "Adaugă la RAID" #: ../../diskdrake.pm_.c:326 msgid "Remove from RAID" msgstr "Șterge din RAID" #: ../../diskdrake.pm_.c:328 msgid "Modify RAID" msgstr "Modifică RAID" #: ../../diskdrake.pm_.c:330 msgid "Add to LVM" msgstr "Adaugă la LVM" #: ../../diskdrake.pm_.c:332 msgid "Remove from LVM" msgstr "Șterge din LVM" #: ../../diskdrake.pm_.c:334 msgid "Use for loopback" msgstr "Folosește pentru loopback" #: ../../diskdrake.pm_.c:341 msgid "Choose action" msgstr "Alegeți acțiunea" #: ../../diskdrake.pm_.c:435 msgid "" "Sorry I won't accept to create /boot so far onto the drive (on a cylinder > " "1024).\n" "Either you use LILO and it won't work, or you don't use LILO and you don't " "need /boot" msgstr "" "Îmi pare rău dar nu voi accepta să creez /boot atît de departe ê disc (pe un " "cilindru > 1024).\n" "Sau folosiți LILO soi nu va funcționa, sau nu folosiți LILO și atunci nu\n" "aveți nevoie de /boot" #: ../../diskdrake.pm_.c:439 msgid "" "The partition you've selected to add as root (/) is physically located " "beyond\n" "the 1024th cylinder of the hard drive, and you have no /boot partition.\n" "If you plan to use the LILO boot manager, be careful to add a /boot partition" msgstr "" "Partiția pe care ați selecționat-o pentru adăugare ca root (/) e fizic " "localizată dincolo\n" "de cilindru 1024 pe discul dur și nu aveți nici o partiție /boot.\n" "Dacă planificați să folosiți LILO ca gestionar de demaraj, asigurați-vă " "căați adăugat o partiție /boot." #: ../../diskdrake.pm_.c:445 #, fuzzy msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "So be careful to add a /boot partition" msgstr "" "Ați selectat o partiție software root en tant que RAID.\n" "Nici un gestionar de boot nu e capabil să gereze aceasta fără\n" "o partitie /boot. Folosiți deci o partiție /boot dacă doriți să folosiți\n" "lilo sau grub." #: ../../diskdrake.pm_.c:462 ../../diskdrake.pm_.c:464 #, c-format msgid "Use ``%s'' instead" msgstr "Folosește ``%s'' în loc" #: ../../diskdrake.pm_.c:468 msgid "Use ``Unmount'' first" msgstr "Folosește ``Demontare' mai întîi" #: ../../diskdrake.pm_.c:469 ../../diskdrake.pm_.c:513 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "" "După schimbarea tipului de partiție %s, toate datele de pe aceasta " "partițievor fi pierdute" #: ../../diskdrake.pm_.c:481 msgid "Continue anyway?" msgstr "Continuați totuși?" #: ../../diskdrake.pm_.c:486 msgid "Quit without saving" msgstr "Ieșire fără a înregistra" #: ../../diskdrake.pm_.c:486 msgid "Quit without writing the partition table?" msgstr "Ieșire din program fără a scrie în tabloul de partiții ?" #: ../../diskdrake.pm_.c:516 msgid "Change partition type" msgstr "Schimbă tipul partiției" #: ../../diskdrake.pm_.c:517 #, fuzzy msgid "Which filesystem do you want?" msgstr "Ce limbă doriți ?" #: ../../diskdrake.pm_.c:520 ../../diskdrake.pm_.c:780 msgid "You can't use ReiserFS for partitions smaller than 32MB" msgstr "" #: ../../diskdrake.pm_.c:537 #, c-format msgid "Where do you want to mount loopback file %s?" msgstr "Unde doriți să montați fișierul loopback %s?" #: ../../diskdrake.pm_.c:538 #, c-format msgid "Where do you want to mount device %s?" msgstr "Unde doriți să montați perifericul %s?" #: ../../diskdrake.pm_.c:542 msgid "" "Can't unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" "Nu pot să desființez acest punct de montaj pentru că partiția e " "folosităpentru loopback.\n" "Ștergeți loopback-ul mai întîi" #: ../../diskdrake.pm_.c:561 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "" "După formatarea partiției %s toate datele de pe aceasta partiție vor fi " "pierdute" #: ../../diskdrake.pm_.c:563 msgid "Formatting" msgstr "Formatare" #: ../../diskdrake.pm_.c:564 #, c-format msgid "Formatting loopback file %s" msgstr "Formatarea fișierului loopback %s" #: ../../diskdrake.pm_.c:565 ../../install_steps_interactive.pm_.c:430 #, c-format msgid "Formatting partition %s" msgstr "Formatarea partiției %s" #: ../../diskdrake.pm_.c:570 msgid "After formatting all partitions," msgstr "După formatarea tuturor partițiilor," #: ../../diskdrake.pm_.c:570 msgid "all data on these partitions will be lost" msgstr "toate datele din aceste partiții vor fi pierdute" #: ../../diskdrake.pm_.c:576 msgid "Move" msgstr "Deplasează" #: ../../diskdrake.pm_.c:577 msgid "Which disk do you want to move it to?" msgstr "Pe ce disc doriți să schimbați ?" #: ../../diskdrake.pm_.c:578 msgid "Sector" msgstr "Sector" #: ../../diskdrake.pm_.c:579 msgid "Which sector do you want to move it to?" msgstr "La ce sector doriți sa schimbați ?" #: ../../diskdrake.pm_.c:582 msgid "Moving" msgstr "Schimbă" #: ../../diskdrake.pm_.c:582 msgid "Moving partition..." msgstr "Schimbă partiția..." #: ../../diskdrake.pm_.c:592 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "Tabloul de partiții al perifericului %s va fi scris pe disc!" #: ../../diskdrake.pm_.c:594 msgid "You'll need to reboot before the modification can take place" msgstr "" "Va trebui să redemarați pentru ca schimbările sa fie luate în considerare" #: ../../diskdrake.pm_.c:615 msgid "Computing FAT filesystem bounds" msgstr "Calculează salturile de fișiere FAT" #: ../../diskdrake.pm_.c:615 ../../diskdrake.pm_.c:680 #: ../../install_interactive.pm_.c:107 msgid "Resizing" msgstr "Redimensionează" #: ../../diskdrake.pm_.c:643 #, fuzzy msgid "This partition is not resizeable" msgstr "Ce tip de partiție doriți?" #: ../../diskdrake.pm_.c:648 msgid "All data on this partition should be backed-up" msgstr "Toate datele de pe aceasta partiție ar trebui salvate mai întîi" #: ../../diskdrake.pm_.c:650 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "" "După redimensionarea partiției %s toate datele de pe aceasta partiție vor fi " "pierdute" #: ../../diskdrake.pm_.c:660 msgid "Choose the new size" msgstr "Alegeți noua mărime" #: ../../diskdrake.pm_.c:660 ../../install_steps_graphical.pm_.c:287 #: ../../install_steps_graphical.pm_.c:334 msgid "MB" msgstr "MB" #: ../../diskdrake.pm_.c:714 msgid "Create a new partition" msgstr "Creează o nouă partiție" #: ../../diskdrake.pm_.c:740 msgid "Start sector: " msgstr "Sector de început: " #: ../../diskdrake.pm_.c:744 ../../diskdrake.pm_.c:819 msgid "Size in MB: " msgstr "Mărimea în MB: " #: ../../diskdrake.pm_.c:747 ../../diskdrake.pm_.c:822 msgid "Filesystem type: " msgstr "Tipul de fișiere: " #: ../../diskdrake.pm_.c:750 msgid "Preference: " msgstr "Preferință: " #: ../../diskdrake.pm_.c:798 msgid "This partition can't be used for loopback" msgstr "Această partiție nu poate fi folosită pentru loopback" #: ../../diskdrake.pm_.c:808 msgid "Loopback" msgstr "Loopback" #: ../../diskdrake.pm_.c:818 msgid "Loopback file name: " msgstr "Numele fișierului loopback" #: ../../diskdrake.pm_.c:844 msgid "File already used by another loopback, choose another one" msgstr "Fișier deja folosit de un alt loopback, alegeți un altul" #: ../../diskdrake.pm_.c:845 msgid "File already exists. Use it?" msgstr "Fișierul există deja. Să-l folosesc ?" #: ../../diskdrake.pm_.c:867 ../../diskdrake.pm_.c:883 msgid "Select file" msgstr "Selecționează fișierul" #: ../../diskdrake.pm_.c:876 msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" "Tabloul de partiție salvat nu are aceeași mărime\n" "Să continui totuși ?" #: ../../diskdrake.pm_.c:884 msgid "Warning" msgstr "Avertisment" #: ../../diskdrake.pm_.c:885 msgid "" "Insert a floppy in drive\n" "All data on this floppy will be lost" msgstr "" "Introduceți o dischetă în periferic\n" "Toate datele de pe această dischetă vor fi pierdute" #: ../../diskdrake.pm_.c:896 msgid "Trying to rescue partition table" msgstr "Încercare de salvare a tabloului de partiții" #: ../../diskdrake.pm_.c:905 msgid "device" msgstr "periferic: " #: ../../diskdrake.pm_.c:906 msgid "level" msgstr "nivel" #: ../../diskdrake.pm_.c:907 msgid "chunk size" msgstr "mărimea porțiunii " #: ../../diskdrake.pm_.c:919 msgid "Choose an existing RAID to add to" msgstr "Alegeți un RAID existent la care să adăugați" #: ../../diskdrake.pm_.c:920 ../../diskdrake.pm_.c:946 msgid "new" msgstr "nou" #: ../../diskdrake.pm_.c:944 msgid "Choose an existing LVM to add to" msgstr "Alegeți un LVM existent la care să adăugați" #: ../../diskdrake.pm_.c:949 msgid "LVM name?" msgstr "" #: ../../diskdrake.pm_.c:976 msgid "Removable media automounting" msgstr "Automontare automată a perifericelor extractibile" #: ../../diskdrake.pm_.c:977 msgid "Rescue partition table" msgstr "Salvează tabelul de partiții" #: ../../diskdrake.pm_.c:979 msgid "Reload" msgstr "Reîncarcă" #: ../../fs.pm_.c:88 ../../fs.pm_.c:95 ../../fs.pm_.c:101 ../../fs.pm_.c:107 #: ../../fs.pm_.c:113 #, c-format msgid "%s formatting of %s failed" msgstr "%s Formatarea %s eșuată" #: ../../fs.pm_.c:143 #, c-format msgid "I don't know how to format %s in type %s" msgstr "Nu știu cum să formatez %s în tipul %s" #: ../../fs.pm_.c:230 msgid "mount failed: " msgstr "montare eșuată: " #: ../../fs.pm_.c:242 #, c-format msgid "error unmounting %s: %s" msgstr "eroare la demontarea %s: %s" #: ../../fsedit.pm_.c:21 #, fuzzy msgid "simple" msgstr "Fișier" #: ../../fsedit.pm_.c:30 msgid "server" msgstr "server" #: ../../fsedit.pm_.c:262 msgid "Mount points must begin with a leading /" msgstr "Punctele de montaje trebuie sa înceapă cu un /" #: ../../fsedit.pm_.c:265 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "O partiție cu punctul de montaj %s există deja\n" #: ../../fsedit.pm_.c:273 #, c-format msgid "Circular mounts %s\n" msgstr "Montaje circulare %s\n" #: ../../fsedit.pm_.c:285 #, c-format msgid "You can't use a LVM Logical Volume for mount point %s" msgstr "" #: ../../fsedit.pm_.c:286 msgid "This directory should remain within the root filesystem" msgstr "" #: ../../fsedit.pm_.c:287 msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n" msgstr "" "Aveți nevoie de un sistem de fișiere serios (ext2, reiserfs) pentru\n" "acest punct de montaj.\n" #: ../../fsedit.pm_.c:369 #, c-format msgid "Error opening %s for writing: %s" msgstr "Eroare la citirea %s pentru a scrie: %s" #: ../../fsedit.pm_.c:453 msgid "" "An error has occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" "O eroare a apărut - nu am găsit nici un periferic pentru a instala noi " "fișiere\n" "sistem. Verificați harware-ul pentru a detecta cauza acestei probleme." #: ../../fsedit.pm_.c:467 msgid "You don't have any partitions!" msgstr "Nu aveți nici o partiție!" #: ../../help.pm_.c:9 #, fuzzy msgid "" "Please choose your preferred language for installation and system usage." msgstr "Alegeți limba pentru instalare și folosirea sistemului." #: ../../help.pm_.c:12 msgid "" "You need to accept the terms of the above license to continue installation.\n" "\n" "\n" "Please click on \"Accept\" if you agree with its terms.\n" "\n" "\n" "Please click on \"Refuse\" if you disagree with its terms. Installation will " "end without modifying your current\n" "configuration." msgstr "" #: ../../help.pm_.c:22 msgid "Choose the layout corresponding to your keyboard from the list above" msgstr "Alegeți dispoziția tastaturii din lista de mai sus" #: ../../help.pm_.c:25 msgid "" "If you wish other languages (than the one you choose at\n" "beginning of installation) will be available after installation, please " "chose\n" "them in list above. If you want select all, you just need to select \"All\"." msgstr "" #: ../../help.pm_.c:30 msgid "" "Please choose \"Install\" if there are no previous version of Linux-" "Mandrake\n" "installed or if you wish to use several operating systems.\n" "\n" "\n" "Please choose \"Update\" if you wish to update an already installed version " "of Linux-Mandrake.\n" "\n" "\n" "Depend of your knowledge in GNU/Linux, you can choose one of the following " "levels to install or update your\n" "Linux-Mandrake operating system:\n" "\n" "\t* Recommended: if you have never installed a GNU/Linux operating system " "choose this. Installation will be\n" "\t be very easy and you will be asked only on few questions.\n" "\n" "\n" "\t* Customized: if you are familiar enough with GNU/Linux, you may choose " "the primary usage (workstation, server,\n" "\t development) of your system. You will need to answer to more questions " "than in \"Recommended\" installation\n" "\t class, so you need to know how GNU/Linux works to choose this " "installation class.\n" "\n" "\n" "\t* Expert: if you have a good knowledge in GNU/Linux, you can choose this " "installation class. As in \"Customized\"\n" "\t installation class, you will be able to choose the primary usage " "(workstation, server, development). Be very\n" "\t careful before choose this installation class. You will be able to " "perform a higly customized installation.\n" "\t Answer to some questions can be very difficult if you haven't a good " "knowledge in GNU/Linux. So, don't choose\n" "\t this installation class unless you know what you are doing." msgstr "" #: ../../help.pm_.c:56 msgid "" "Select:\n" "\n" " - Customized: If you are familiar enough with GNU/Linux, you may then " "choose\n" " the primary usage for your machine. See below for details.\n" "\n" "\n" " - Expert: This supposes that you are fluent with GNU/Linux and want to\n" " perform a highly customized installation. As for a \"Customized\"\n" " installation class, you will be able to select the usage for your " "system.\n" " But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE " "DOING!" msgstr "" "Selectare:\n" "\n" " - Personalizat: Dacă sunteți destul de familiar cu GNU/Linux, puteți\n" " atunci să alegeți utilizarea principală a calculatorului. Vezi mai jos\n" " pentru detalii.\n" "\n" "\n" " - Expert: Aceasta presupune că sunteți foarte familiar cu GNU/Linux și\n" " doriți să faceți o instalare foarte personalizată. Ca și pentru clasa\n" " \"Personalizat\", veți putea să selectați utilizarea sistemului\n" " dumneavoastră.\n" " Dar vă rog, NU ALEGEȚi ACEASTA DECÎT DACĂ ȘTIȚI CE FACEȚI!." #: ../../help.pm_.c:68 #, fuzzy msgid "" "You must now define your machine usage. Choices are:\n" "\n" "\t* Workstation: this the ideal choice if you intend to use your machine " "primarily for everyday use, at office or\n" "\t at home.\n" "\n" "\n" "\t* Development: if you intend to use your machine primarily for software " "development, it is the good choice. You\n" "\t will then have a complete collection of software installed in order to " "compile, debug and format source code,\n" "\t or create software packages.\n" "\n" "\n" "\t* Server: if you intend to use this machine as a server, it is the good " "choice. Either a file server (NFS or\n" "\t SMB), a print server (Unix style or Microsoft Windows style), an " "authentication server (NIS), a database\n" "\t server and so on. As such, do not expect any gimmicks (KDE, GNOME, etc.) " "to be installed." msgstr "" "Diferitele posibilități pentru utilizarea calculatorului (furnizate, deci, " "dacă\n" "ați ales \"Personalizat\" sau \"Expert\" la clasa de instalare) sunt \n" "următoarele:\n" "\n" " - Normal: alegeți aceasta dacă doriți să folosiți calculatorul pentru\n" " utilizare zilnică (munca de servici, manipulații grafice, etc). Nu vă\n" " așteptați la nici un compilator, utilitare de programare și altele\n" "\n" " - Programare: cum numele-l indică. Alegeți acesta dacă doriți să aveți\n" " un calculator în principal pentru programare. Veți avea atunci o " "colecțiecompletă\n" " instalată pentru a compila, deboga și formata cod sursă sau crea \n" " pachete software.\n" "\n" " - Server: alegeți aceasta pentru a instala Linux-Mandrake și " "intenționați să-l folosiți ca server. Acesta poate fi server de fișiere " "(NFS sau SMB),\n" " sau server de imprimantă (Unix' lp (Line Printer) protocol sau " "imprimare \n" "stil Windows SMB, server de autentificare (NIS), server de baze de date, " "etc.\n" "Deci nu vă așteptați la programe de genul KDE, GNOME...\n" #: ../../help.pm_.c:84 msgid "" "DrakX will attempt to look for PCI SCSI adapter(s). If DrakX\n" "finds an SCSI adapter and knows which driver to use, it will be " "automatically\n" "installed.\n" "\n" "\n" "If you have no SCSI adapter, an ISA SCSI adapter or a PCI SCSI adapter that\n" "DrakX doesn't recognize, you will be asked if a SCSI adapter is present in " "your\n" "system. If there is no adapter present, you can click on \"No\". If you " "click on\n" "\"Yes\", a list of drivers will be presented from which you can select your\n" "specific adapter.\n" "\n" "\n" "If you have to manually specify your adapter, DrakX will ask if you want to\n" "specify options for it. You should allow DrakX to probe the hardware for " "the\n" "options. This usually works well.\n" "\n" "\n" "If not, you will need to provide options to the driver. Please review the " "User\n" "Guide (chapter 3, section \"Collective informations on your hardware) for " "hints\n" "on retrieving this information from hardware documentation, from the\n" "manufacturer's Web site (if you have Internet access) or from Microsoft " "Windows\n" "(if you have it on your system)." msgstr "" #: ../../help.pm_.c:108 msgid "" "At this point, you need to choose where to install your\n" "Linux-Mandrake operating system on your hard drive. If it is empty or if an\n" "existing operating system uses all the space available on it, you need to\n" "partition it. Basically, partitioning a hard drive consists of logically\n" "dividing it to create space to install your new Linux-Mandrake system.\n" "\n" "\n" "Because the effects of the partitioning process are usually irreversible,\n" "partitioning can be intimidating and stressful if you are an inexperienced " "user.\n" "This wizard simplifies this process. Before beginning, please consult the " "manual\n" "and take your time.\n" "\n" "\n" "You need at least two partitions. One is for the operating system itself and " "the\n" "other is for the virtual memory (also called Swap).\n" "\n" "\n" "If partitions have been already defined (from a previous installation or " "from\n" "another partitioning tool), you just need choose those to use to install " "your\n" "Linux system.\n" "\n" "\n" "If partitions haven't been already defined, you need to create them. \n" "To do that, use the wizard available above. Depending of your hard drive\n" "configuration, several solutions can be available:\n" "\n" "\t* Use existing partition: the wizard has detected one or more existing " "Linux partitions on your hard drive. If\n" "\t you want to keep them, choose this option. \n" "\n" "\n" "\t* Erase entire disk: if you want delete all data and all partitions " "present on your hard drive and replace them by\n" "\t your new Linux-Mandrake system, you can choose this option. Be careful " "with this solution, you will not be\n" "\t able to revert your choice after confirmation.\n" "\n" "\n" "\t* Use the free space on the Windows partition: if Microsoft Windows is " "installed on your hard drive and takes\n" "\t all space available on it, you have to create free space for Linux data. " "To do that you can delete your\n" "\t Microsoft Windows partition and data (see \"Erase entire disk\" or " "\"Expert mode\" solutions) or resize your\n" "\t Microsoft Windows partition. Resizing can be performed without loss of " "any data. This solution is\n" "\t recommended if you want use both Linux-Mandrake and Microsoft Windows on " "same computer.\n" "\n" "\n" "\t Before choosing this solution, please understand that the size of your " "Microsoft\n" "\t Windows partition will be smaller than at present time. It means that " "you will have less free space under\n" "\t Microsoft Windows to store your data or install new software.\n" "\n" "\n" "\t* Expert mode: if you want to partition manually your hard drive, you can " "choose this option. Be careful before\n" "\t choosing this solution. It is powerful but it is very dangerous. You can " "lose all your data very easily. So,\n" "\t don't choose this solution unless you know what you are doing." msgstr "" #: ../../help.pm_.c:160 msgid "" "At this point, you need to choose what\n" "partition(s) to use to install your new Linux-Mandrake system. If " "partitions\n" "have been already defined (from a previous installation of GNU/Linux or " "from\n" "another partitioning tool), you can use existing partitions. In other " "cases,\n" "hard drive partitions must be defined.\n" "\n" "\n" "To create partitions, you must first select a hard drive. You can select " "the\n" "disk for partitioning by clicking on \"hda\" for the first IDE drive, \"hdb" "\" for\n" "the second or \"sda\" for the first SCSI drive and so on.\n" "\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * Clear all: this option deletes all partitions available on the selected " "hard drive.\n" "\n" "\n" " * Auto allocate: this option allows you to automatically create Ext2 and " "swap partitions in free space of your\n" " hard drive.\n" "\n" "\n" " * Rescue partition table: if your partition table is damaged, you can try " "to recover it using this option. Please\n" " be careful and remember that it can fail.\n" "\n" "\n" " * Undo: you can use this option to cancel your changes.\n" "\n" "\n" " * Reload: you can use this option if you wish to undo all changes and " "load your initial partitions table\n" "\n" "\n" " * Wizard: If you wish to use a wizard to partition your hard drive, you " "can use this option. It is recommended if\n" " you do not have a good knowledge in partitioning.\n" "\n" "\n" " * Restore from floppy: if you have saved your partition table on a floppy " "during a previous installation, you can\n" " recover it using this option.\n" "\n" "\n" " * Save on floppy: if you wish to save your partition table on a floppy to " "be able to recover it, you can use this\n" " option. It is strongly recommended to use this option\n" "\n" "\n" " * Done: when you have finished partitioning your hard drive, use this " "option to save your changes.\n" "\n" "\n" "For information, you can reach any option using the keyboard: navigate " "trough the partitions using Tab and Up/Down arrows.\n" "\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when a empty partition is " "selected)\n" "\n" " * Ctrl-d to delete a partition\n" "\n" " * Ctrl-m to set the mount point\n" " \n" "\n" " \n" "If you are installing on a PPC Machine, you will want to create a small HFS " "'bootstrap' partition of at least 1MB for use\n" "by the yaboot bootloader. If you opt to make the partition a bit larger, say " "50MB, you may find it a useful place to store \n" "a spare kernel and ramdisk image for emergency boot situations." msgstr "" #: ../../help.pm_.c:224 msgid "" "Above are listed the existing Linux partitions detected on\n" "your hard drive. You can keep choices make by the wizard, they are good for " "a\n" "common usage. If you change these choices, you must at least define a root\n" "partition (\"/\"). Don't choose a too little partition or you will not be " "able\n" "to install enough software. If you want store your data on a separate " "partition,\n" "you need also to choose a \"/home\" (only possible if you have more than " "one\n" "Linux partition available).\n" "\n" "\n" "For information, each partition is listed as follows: \"Name\", \"Capacity" "\".\n" "\n" "\n" "\"Name\" is coded as follow: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and " "\"sd\"\n" "if it is an SCSI hard drive.\n" "\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE " "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\",\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\",\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\",\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "\n" "With SCSI hard drives, a \"a\" means \"primary hard drive\", a \"b\" means " "\"secondary hard drive\", etc..." msgstr "" #: ../../help.pm_.c:258 msgid "" "Choose the hard drive you want to erase to install your\n" "new Linux-Mandrake partition. Be careful, all data present on it will be " "lost\n" "and will not be recoverable." msgstr "" #: ../../help.pm_.c:263 msgid "" "Click on \"OK\" if you want to delete all data and\n" "partitions present on this hard drive. Be careful, after clicking on \"OK\", " "you\n" "will not be able to recover any data and partitions present on this hard " "drive,\n" "including any Windows data.\n" "\n" "\n" "Click on \"Cancel\" to cancel this operation without losing any data and\n" "partitions present on this hard drive." msgstr "" #: ../../help.pm_.c:273 msgid "" "More than one Microsoft Windows partition have been\n" "detected on your hard drive. Please choose the one you want resize to " "install\n" "your new Linux-Mandrake operating system.\n" "\n" "\n" "For information, each partition is listed as follow; \"Linux name\", " "\"Windows\n" "name\" \"Capacity\".\n" "\n" "\"Linux name\" is coded as follow: \"hard drive type\", \"hard drive number" "\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and \"sd" "\"\n" "if it is an SCSI hard drive.\n" "\n" "\n" "\"Hard drive number\" is always a letter putted after \"hd\" or \"sd\". With " "IDE hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\",\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\",\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\",\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, a \"a\" means \"primary hard drive\", a \"b\" means " "\"secondary hard drive\", etc.\n" "\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first " "disk\n" "or partition is called \"C:\")." msgstr "" #: ../../help.pm_.c:306 msgid "Please be patient. This operation can take several minutes." msgstr "" #: ../../help.pm_.c:309 msgid "" "Any partitions that have been newly defined must be\n" "formatted for use (formatting meaning creating a filesystem).\n" "\n" "\n" "At this time, you may wish to reformat some already existing partitions to " "erase\n" "the data they contain. If you wish do that, please also select the " "partitions\n" "you want to format.\n" "\n" "\n" "Please note that it is not necessary to reformat all pre-existing " "partitions.\n" "You must reformat the partitions containing the operating system (such as \"/" "\",\n" "\"/usr\" or \"/var\") but do you no have to reformat partitions containing " "data\n" "that you wish to keep (typically /home).\n" "\n" "\n" "Please be careful selecting partitions, after formatting, all data will be\n" "deleted and you will not be able to recover any of them.\n" "\n" "\n" "Click on \"OK\" when you are ready to format partitions.\n" "\n" "\n" "Click on \"Cancel\" if you want to choose other partitions to install your " "new\n" "Linux-Mandrake operating system." msgstr "" #: ../../help.pm_.c:335 #, fuzzy msgid "" "You may now select the group of packages you wish to\n" "install or upgrade.\n" "\n" "\n" "DrakX will then check whether you have enough room to install them all. If " "not,\n" "it will warn you about it. If you want to go on anyway, it will proceed onto " "the\n" "installation of all selected groups but will drop some packages of lesser\n" "interest. At the bottom of the list you can select the option \n" "\"Individual package selection\"; in this case you will have to browse " "through\n" "more than 1000 packages..." msgstr "" "Puteți acum să selectați grupul pachetelor pe care vreți să le instalați\n" "sau actualizați.\n" "DrakX va verifica dacă aveți destul spațiu pentru a le instala pe toate.Dacă " "nu, vă va avertiza despre asta. Dacă doriți să continuați oricum,\n" "va continua instalarea a tuturor grupurilor selectate dar va lăsa\n" "deoparte cîteva pachete de mai puțin interes. La baza listei puteți să\n" "selectați opțiunea \"Selectarea individuală a pachetelor\"; în acest caz\n" "va trebui va trebui să parcurgeți mai mult de 1000 de pachete..." #: ../../help.pm_.c:347 msgid "" "You can now choose individually all the packages you\n" "wish to install.\n" "\n" "\n" "You can expand or collapse the tree by clicking on options in the left " "corner of\n" "the packages window.\n" "\n" "\n" "If you prefer to see packages sorted in alphabetic order, click on the icon\n" "\"Toggle flat and group sorted\".\n" "\n" "\n" "If you want not to be warned on dependencies, click on \"Automatic\n" "dependencies\". If you do this, note that unselecting one package may " "silently\n" "unselect several other packages which depend on it." msgstr "" #: ../../help.pm_.c:364 #, fuzzy msgid "" "If you have all the CDs in the list above, click Ok. If you have\n" "none of those CDs, click Cancel. If only some CDs are missing, unselect " "them,\n" "then click Ok." msgstr "" "Dacă aveți toate CD-urile din lista de mai sus faceți clic pe Ok.\n" "Dacă nu aveți nici unul din aceste Cd-uri, faceți clic pe Anulează.\n" "Dacă numai cîteva din aceste Cd-uri lipsesc, de-selectați-le și apoi Ok." #: ../../help.pm_.c:369 msgid "" "Your new Linux-Mandrake operating system is currently being\n" "installed. This operation should take a few minutes (it depends on size you\n" "choose to install and the speed of your computer).\n" "\n" "\n" "Please be patient." msgstr "" #: ../../help.pm_.c:377 msgid "" "You can now test your mouse. Use buttons and wheel to verify\n" "if settings are good. If not, you can click on \"Cancel\" to choose another\n" "driver." msgstr "" #: ../../help.pm_.c:382 #, fuzzy msgid "" "Please select the correct port. For example, the COM1\n" "port under MS Windows is named ttyS0 under GNU/Linux." msgstr "" "Vă rog selectați portul corect. De exemplu, portul COM1 din Windows e\n" "numit ttyS0 în Linux." #: ../../help.pm_.c:386 msgid "" "If you wish to connect your computer to the Internet or\n" "to a local network please choose the correct option. Please turn on your " "device\n" "before choosing the correct option to let DrakX detect it automatically.\n" "\n" "\n" "If you do not have any connection to the Internet or a local network, " "choose\n" "\"Disable networking\".\n" "\n" "\n" "If you wish to configure the network later after installation or if you " "have\n" "finished to configure your network connection, choose \"Done\"." msgstr "" #: ../../help.pm_.c:399 msgid "" "No modem has been detected. Please select the serial port on which it is " "plugged.\n" "\n" "\n" "For information, the first serial port (called \"COM1\" under Microsoft\n" "Windows) is called \"ttyS0\" under Linux." msgstr "" #: ../../help.pm_.c:406 msgid "" "You may now enter dialup options. If you don't know\n" "or are not sure what to enter, the correct informations can be obtained " "from\n" "your Internet Service Provider. If you do not enter the DNS (name server)\n" "information here, this information will be obtained from your Internet " "Service\n" "Provider at connection time." msgstr "" #: ../../help.pm_.c:413 msgid "" "If your modem is an external modem, please turn on it now to let DrakX " "detect it automatically." msgstr "" #: ../../help.pm_.c:416 msgid "Please turn on your modem and choose the correct one." msgstr "" #: ../../help.pm_.c:419 msgid "" "If you are not sure if informations above are\n" "correct or if you don't know or are not sure what to enter, the correct\n" "informations can be obtained from your Internet Service Provider. If you do " "not\n" "enter the DNS (name server) information here, this information will be " "obtained\n" "from your Internet Service Provider at connection time." msgstr "" #: ../../help.pm_.c:426 #, fuzzy msgid "" "You may now enter your host name if needed. If you\n" "don't know or are not sure what to enter, the correct informations can be\n" "obtained from your Internet Service Provider." msgstr "" "Puteți intra opțiunile de telefonie. Dacă nu sunteți sigur de ceea ce\n" "trebuie să intrați, întrebați ISP-ul dumneavoastră." #: ../../help.pm_.c:431 #, fuzzy msgid "" "You may now configure your network device.\n" "\n" " * IP address: if you don't know or are not sure what to enter, ask your " "network administrator.\n" " You should not enter an IP address if you select the option \"Automatic " "IP\" below.\n" "\n" " * Netmask: \"255.255.255.0\" is generally a good choice. If you don't " "know or are not sure what to enter,\n" " ask your network administrator.\n" "\n" " * Automatic IP: if your network uses BOOTP or DHCP protocol, select this " "option. If selected, no value is needed in\n" " \"IP address\". If you don't know or are not sure if you need to select " "this option, ask your network administrator." msgstr "" "Intrare;\n" "\n" " - Adresă IP: dacă nu știți care e, întrebați administratorul de rețea " "sauFurnizorul de Acces Internet (ISP).\n" "\n" "\n" " - Mască de rețea: \"255.255.255.0\" e în general cea corectă. Dacă nu\n" "sunteți sigur, întrebați administratorul de rețea sau ISP.\n" #: ../../help.pm_.c:443 #, fuzzy msgid "" "You may now enter your host name if needed. If you\n" "don't know or are not sure what to enter, ask your network administrator." msgstr "" "Dacă rețeaua dumneavoastră folosește NIS, selectați \"Folosește NIS\". Dacă\n" "nu știți exact, întrebați administratorul de rețea." #: ../../help.pm_.c:447 msgid "" "You may now enter your host name if needed. If you\n" "don't know or are not sure what to enter, leave blank." msgstr "" #: ../../help.pm_.c:451 msgid "" "You may now enter dialup options. If you're not sure what to enter, the\n" "correct information can be obtained from your ISP." msgstr "" "Puteți intra opțiunile de telefonie. Dacă nu sunteți sigur de ceea ce\n" "trebuie să intrați, întrebați ISP-ul dumneavoastră." #: ../../help.pm_.c:455 msgid "" "If you will use proxies, please configure them now. If you don't know if\n" "you should use proxies, ask your network administrator or your ISP." msgstr "" "Dacă folosiți servere proxy, configurați-le acum. Dacă nu știți dacă ar\n" "trebuie să folosiți un proxy, întrebați administratorul de rețea sau ISP-ul." #: ../../help.pm_.c:459 #, fuzzy msgid "" "You can install cryptographic package if your internet connection has been\n" "set up correctly. First choose a mirror where you wish to download packages " "and\n" "after that select the packages to install.\n" "\n" "\n" "Note you have to select mirror and cryptographic packages according\n" "to your legislation." msgstr "" "Puteți instala pachetul criptografie dacă conexiunea Internet a fost\n" "realizată corect. Alegeți mai întîi un sit Internet oglindă pentru a\n" "recupera pachetele și selectați pachetele de instalat.\n" "\n" "Notați că va trebui să alegeți aceste pachete criptografice corespunzătoare\n" "legislație dumneavoastră." #: ../../help.pm_.c:468 msgid "You can now select your timezone according to where you live." msgstr "" #: ../../help.pm_.c:471 #, fuzzy msgid "" "GNU/Linux manages time in GMT (Greenwich Manage\n" "Time) and translates it in local time according to the time zone you have\n" "selected.\n" "\n" "\n" "If you use Microsoft Windows on this computer, choose \"No\"." msgstr "" "Puteți selecta acum zona orară în funcție de locul unde trăiți.\n" "\n" "\n" "Linux tratează ora în format GMT sau \"Greenwich Mean Time\" și-l traduce\n" "în oră locală în funcție de zona orară aleasă." #: ../../help.pm_.c:479 #, fuzzy msgid "" "You may now choose which services you want to start at boot time.\n" "\n" "\n" "When your mouse comes over an item, a small balloon help will popup which\n" "describes the role of the service.\n" "\n" "\n" "Be very careful in this step if you intend to use your machine as a server: " "you\n" "will probably want not to start any services that you don't need. Please\n" "remember that several services can be dangerous if they are enable on a " "server.\n" "In general, select only the services that you really need." msgstr "" "Puteți alege acum serviciile ce doriți să inițializați la demararea\n" "calculatorului. Dacă plasați mouse-ul deasupra rubricii, un mic balon de\n" "ajutor va apare pentru a descrie rolul serviciului respectiv." #: ../../help.pm_.c:492 msgid "" "You can configure a local printer (connected to your computer) or remote\n" "printer (accessible via a Unix, Netware or Microsoft Windows network)." msgstr "" #: ../../help.pm_.c:496 msgid "" "If you wish to be able to print, please choose one printing system between\n" "CUPS and LPR.\n" "\n" "\n" "CUPS is a new, powerful and flexible printing system for Unix systems (CUPS\n" "means \"Common Unix Printing System\"). It is the default printing system " "in\n" "Linux-Mandrake.\n" "\n" "\n" "LPR is the old printing system used in previous Linux-Mandrake " "distributions.\n" "\n" "\n" "If you don't have printer, click on \"None\"." msgstr "" #: ../../help.pm_.c:511 msgid "" "GNU/Linux can deal with many types of printer. Each of these types requires\n" "a different setup.\n" "\n" "\n" "If your printer is physically connected to your computer, select \"Local\n" "printer\".\n" "\n" "\n" "If you want to access a printer located on a remote Unix machine, select\n" "\"Remote printer\".\n" "\n" "\n" "If you want to access a printer located on a remote Microsoft Windows " "machine\n" "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"." msgstr "" #: ../../help.pm_.c:527 msgid "" "Please turn on your printer before continuing to let DrakX detect it.\n" "\n" "You have to enter some informations here.\n" "\n" "\n" " * Name of printer: the print spooler uses \"lp\" as default printer name. " "So, you must have a printer named \"lp\".\n" " If you have only one printer, you can use several names for it. You " "just need to separate them by a pipe\n" " character (a \"|\"). So, if you prefer a more meaningful name, you have " "to put it first, eg: \"My printer|lp\".\n" " The printer having \"lp\" in its name(s) will be the default printer.\n" "\n" "\n" " * Description: this is optional but can be useful if several printers are " "connected to your computer or if you allow\n" " other computers to access to this printer.\n" "\n" "\n" " * Location: if you want to put some information on your\n" " printer location, put it here (you are free to write what\n" " you want, for example \"2nd floor\").\n" msgstr "" #: ../../help.pm_.c:548 msgid "" "You need to enter some informations here.\n" "\n" "\n" " * Name of queue: the print spooler uses \"lp\" as default printer name. " "So, you need have a printer named \"lp\".\n" " If you have only one printer, you can use several names for it. You just " "need to separate them by a pipe\n" " character (a \"|\"). So, if you prefer to have a more meaningful name, " "you have to put it first, eg: \"My printer|lp\".\n" " The printer having \"lp\" in its name(s) will be the default printer.\n" "\n" " \n" " * Spool directory: it is in this directory that printing jobs are stored. " "Keep the default choice\n" " if you don't know what to use\n" "\n" "\n" " * Printer Connection: If your printer is physically connected to your " "computer, select \"Local printer\".\n" " If you want to access a printer located on a remote Unix machine, " "select \"Remote lpd printer\".\n" "\n" "\n" " If you want to access a printer located on a remote Microsoft Windows " "machine (or on Unix machine using SMB\n" " protocol), select \"SMB/Windows 95/98/NT\".\n" "\n" "\n" " If you want to acces a printer located on NetWare network, select " "\"NetWare\".\n" msgstr "" #: ../../help.pm_.c:573 msgid "" "Your printer has not been detected. Please enter the name of the device on\n" "which it is connected.\n" "\n" "\n" "For information, most printers are connected on the first parallel port. " "This\n" "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft " "Windows." msgstr "" #: ../../help.pm_.c:581 msgid "You must now select your printer in the above list." msgstr "" #: ../../help.pm_.c:584 msgid "" "Please select the right options according to your printer.\n" "Please see its documentation if you don't know what choose here.\n" "\n" "\n" "You will be able to test your configuration in next step and you will be " "able to modify it if it doesn't work as you want." msgstr "" #: ../../help.pm_.c:591 #, fuzzy msgid "" "You can now enter the root password for your Linux-Mandrake system.\n" "The password must be entered twice to verify that both password entries are " "identical.\n" "\n" "\n" "Root is the system's administrator and is the only user allowed to modify " "the\n" "system configuration. Therefore, choose this password carefully. \n" "Unauthorized use of the root account can be extemely dangerous to the " "integrity\n" "of the system, its data and other system connected to it.\n" "\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. It should never be written down.\n" "\n" "\n" "Do not make the password too long or complicated, though: you must be able " "to\n" "remember it without too much effort." msgstr "" "Alegeți parola pentru utilizatorul administrator al sistemului Linux.\n" "Parola trebuie înscrisă de două ori pentru a se asigura că sunt identice.\n" "\n" "\n" "Root e utilizatorul administrator al sistemului și singurul autorizat\n" "pentru a modifica configurația sistemului. Deci alegeți cu atenție această\n" "parolă! Utilizarea neautorizată a acestui cont poate fi foarte\n" "periculoasă pentru integritatea sistemului, pentru informațiilor conținute\n" "și pentru celelalte calculatoare conectate la el. Această parolă trebuie să\n" "fie un amestec de caractere alfanumerice și de cel puțin 8 caractere. Nu-l\n" "scrieți NICIODATĂ pe ceva și nu-l faceți prea lung sau prea greu de reținut." #: ../../help.pm_.c:609 msgid "" "To enable a more secure system, you should select \"Use shadow file\" and\n" "\"Use MD5 passwords\"." msgstr "" "Pentru a crea un sistem încă și mai sigur, ar trebui să alegeți \"Folosește\n" "un fișier shadow\" și \"Folosește parole MD5\"." #: ../../help.pm_.c:613 msgid "" "If your network uses NIS, select \"Use NIS\". If you don't know, ask your\n" "network administrator." msgstr "" "Dacă rețeaua dumneavoastră folosește NIS, selectați \"Folosește NIS\". Dacă\n" "nu știți exact, întrebați administratorul de rețea." #: ../../help.pm_.c:617 msgid "" "You may now create one or more \"regular\" user account(s), as\n" "opposed to the \"privileged\" user account, root. You can create\n" "one or more account(s) for each person you want to allow to use\n" "the computer. Note that each user account will have its own\n" "preferences (graphical environment, program settings, etc.)\n" "and its own \"home directory\", in which these preferences are\n" "stored.\n" "\n" "\n" "First of all, create an account for yourself! Even if you will be the only " "user\n" "of the machine, you may NOT connect as root for daily use of the system: " "it's a\n" "very high security risk. Making the system unusable is very often a typo " "away.\n" "\n" "\n" "Therefore, you should connect to the system using the user account\n" "you will have created here, and login as root only for administration\n" "and maintenance purposes." msgstr "" "Puteți crea acum unul sau mai multe conturi de utilizator \"obișnuite\",\n" "în opoziție cu contul \"privilegiat\" al utilizatorului root. Puteți\n" "crea unul sau mai multe conturi pentru fiecare persoană autorizată să\n" "se conecteze la calculator. Notați că fiecare cont utilizator va avea\n" "propriile preferințe (configurație grafică, parametrii de programe, etc.)\n" "și propriul dosar personal în \"/home\" unde toate aceste preferințe vor fi\n" "stocate.\n" "\n" "\n" "Mai întîi creați un cont pentru dumneavoastră! Chiar dacă veți fi singurul\n" "utilizator al calculatorului, NU TREBUIE SĂ VĂ CONECTAȚI CA ROOT PENTRU\n" "SCOPURI ZILNICE LA SISTEM: pentru motive securitate. În plus, un sistem\n" "poate ușor deveni inutilizabil prin apăsarea unei taste greșite.\n" "\n" "\n" "În consecință, ar trebuie să vă conectați la sistem folosind contul \n" "utilizatorului pe care l-ați creat aici și să folosiți contul root\n" "numai pentru administrație și scopuri de depanare." #: ../../help.pm_.c:636 msgid "" "Creating a boot disk is strongly recommended. If you can't\n" "boot your computer, it's the only way to rescue your system without\n" "reinstalling it." msgstr "" #: ../../help.pm_.c:641 #, fuzzy msgid "" "You need to indicate where you wish\n" "to place the information required to boot to GNU/Linux.\n" "\n" "\n" "Unless you know exactly what you are doing, choose \"First sector of\n" "drive (MBR)\"." msgstr "" "Va trebui să indicați unde să puneți informația necesară pentru a porni " "Linux.\n" "\n" "\n" "În general alegeți \"Primul sector al discului\". Alegeți altceva doar dacă " "știți ce faceți." #: ../../help.pm_.c:649 msgid "" "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n" " (primary master IDE disk) or \"/dev/sda\" (first SCSI disk)." msgstr "" "Alegerea obișnuită este \"/dev/hda\" pentru un disc maestru principal IDE\n" "sau \"/dev/sda\" pentru primul disc SCSI." #: ../../help.pm_.c:653 #, fuzzy msgid "" "LILO (the LInux LOader) and Grub are bootloaders: they are able to boot\n" "either GNU/Linux or any other operating system present on your computer.\n" "Normally, these other operating systems are correctly detected and\n" "installed. If this is not the case, you can add an entry by hand in this\n" "screen. Be careful as to choose the correct parameters.\n" "\n" "\n" "You may also want not to give access to these other operating systems to\n" "anyone, in which case you can delete the corresponding entries. But\n" "in this case, you will need a boot disk in order to boot them!" msgstr "" "LILO (de la LInux LOader) și Grub sunt gestionare de demaraj. Amîndoi sunt\n" "capabili să demareze Linux sau un alt sistem prezent în calculator.\n" "În mod normal, aceste alte sisteme de operare sunt detectate și instalate\n" "corect. Dacă cumva nu e cazul, puteți adăuga o intrare manual în acest\n" "ecran. Aveți grijă să alegeți parametrii cei buni.\n" "\n" "\n" "Puteți de asemenea să interziceți accesul acestor alte sisteme a altor \n" "utilizatori, caz în care ar trebui să ștergeți intrările acestor sisteme.\n" "În acest ultim caz însă, veți avea nevoie de un floppy de demaraj pentru\n" "a putea le demara!" #: ../../help.pm_.c:665 #, fuzzy msgid "" "LILO and grub main options are:\n" " - Boot device: Sets the name of the device (e.g. a hard disk\n" "partition) that contains the boot sector. Unless you know specifically\n" "otherwise, choose \"/dev/hda\".\n" "\n" "\n" " - Delay before booting default image: Specifies the number in tenths\n" "of a second the boot loader should wait before booting the first image.\n" "This is useful on systems that immediately boot from the hard disk after\n" "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n" "omitted or is set to zero.\n" "\n" "\n" " - Video mode: This specifies the VGA text mode that should be selected\n" "when booting. The following values are available: \n" "\n" " * normal: select normal 80x25 text mode.\n" "\n" " * : use the corresponding text mode.\n" "\n" "\n" " - Clean \"/tmp\" at each boot: if you want delete all files and " "directories\n" "stored in \"/tmp\" when you boot your system, select this option.\n" "\n" "\n" " - Precise RAM if needed: unfortunately, there is no standard method to ask " "the\n" "BIOS about the amount of RAM present in your computer. As consequence, Linux " "may\n" "fail to detect your amount of RAM correctly. If this is the case, you can\n" "specify the correct amount or RAM here. Please note that a difference of 2 " "or 4\n" "MB between detected memory and memory present in your system is normal." msgstr "" "Principalele opțiuni ale lui LILO și grub sunt:\n" " - Periferic de boot: parametrează numele perifericului (e.g. o partiție\n" "a unui disc dur) care conține sectorul de demaraj. În mod normal e vorba\n" "de \"/dev/hda\".\n" "\n" "\n" " - Timp de așteptare înainte de a demara imaginea din oficiu: Specifică\n" "numărul de zecimi de secundă pentru a aștepta înaintea demarării primei\n" "imagini. Acesta e foarte practic pentru sistemele care demarează de pe\n" "disc dur după activarea tastaturii. Gestionarul de demaraj nu așteaptă\n" "deloc dacă secțiunea \"delay\" e omisă sau dacă e fixată la zero.\n" "\n" "\n" " - Mod Video: Aceasta specifică modul text VGA care ar trebui selectat la\n" "demaraj. Următoarele opțiuni sunt valabile:\n" " * normal: selectați normal pentru un mod text de 80x25.\n" " * : folosiți modul text corespunzător." #: ../../help.pm_.c:697 msgid "" "Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able\n" "to boot either GNU/Linux, MacOS, or MacOSX, if present on your computer.\n" "Normally, these other operating systems are correctly detected and\n" "installed. If this is not the case, you can add an entry by hand in this\n" "screen. Be careful as to choose the correct parameters.\n" "\n" "\n" "Yaboot main options are:\n" "\n" "\n" " - Init Message: A simple text message that is displayed before the boot\n" "prompt.\n" "\n" "\n" " - Boot Device: Indicate where you want to place the information required " "to \n" "boot to GNU/Linux. Generally, you will have setup a bootstrap partition " "earlier \n" "to hold this information.\n" "\n" "\n" " - Open Firmware Delay: Unlike LILO, there are two delays available with \n" "yaboot. The first delay is measured in seconds and at this point you can \n" "choose between CD, OF boot, MacOS, or Linux.\n" "\n" "\n" " - Kernel Boot Timeout: This timeout is similar to the LILO boot delay. " "After \n" "selecting Linux, you will have this delay in 0.1 seconds before your " "default\n" "kernel description is selected.\n" "\n" "\n" " - Enable CD Boot?: Checking this option will allow you to choose 'C' for " "CD at\n" "the first boot prompt.\n" "\n" "\n" " - Enable OF Boot?: Checking this option will allow you to choose 'N' for " "Open\n" "Firmware at the first boot prompt.\n" "\n" "\n" " - Default OS: You can select which OS will boot by default when the Open " "Firmware \n" "Delay expires." msgstr "" #: ../../help.pm_.c:738 msgid "" "You can add additional entries for yaboot, either for other operating " "systems,\n" "alternate kernels, or for an emergency boot image.\n" "\n" "\n" "For other OS's - the entry consists only of a label and the root partition.\n" "\n" "\n" "For Linux, there are a few possible options: \n" "\n" "\n" " - Label: This is simply the name will type at the yaboot prompt to select " "this \n" "boot option.\n" "\n" "\n" " - Image: This would be the name of the kernel to boot. Typically vmlinux " "or\n" "a variation of vmlinux with an extension.\n" "\n" "\n" " - Root: The root device or '/' for your Linux installation.\n" "\n" "\n" " \n" " - Append: On Apple hardware, the kernel append option is used quite often " "to\n" "assist in initializing video hardware, or to enable keyboard mouse button " "emulation\n" "for the often lacking 2nd and 3rd mouse buttons on a stock Apple mouse. The " "following \n" "are some examples:\n" "\n" "\n" "\t\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 " "hda=autotune\n" "\n" "\t\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n" "\n" "\n" " \n" " - Initrd: This option can be used either to load initial modules, before " "the boot \n" "device is available, or to load a ramdisk image for an emergency boot " "situation.\n" "\n" "\n" " - Initrd-size: The default ramdisk size is generally 4096 bytes. If you " "should need\n" "to allocate a large ramdisk, this option can be used.\n" "\n" "\n" " - Read-write: Normally the 'root' partition is initially brought up read-" "only, to allow\n" "a filesystem check before the system becomes 'live'. You can override this " "option here.\n" "\n" "\n" " - NoVideo: Should the Apple video hardware prove to be exceptionally " "problematic, you can\n" "select this option to boot in 'novideo' mode, with native framebuffer " "support.\n" "\n" "\n" " - Default: Selects this entry as being the default Linux selection, " "selectable by just\n" "pressing ENTER at the yaboot prompt. This entry will also be highlighted " "with a '*', if you\n" "press TAB to see the boot selections." msgstr "" #: ../../help.pm_.c:793 #, fuzzy msgid "" "SILO is a bootloader for SPARC: it is able to boot\n" "either GNU/Linux or any other operating system present on your computer.\n" "Normally, these other operating systems are correctly detected and\n" "installed. If this is not the case, you can add an entry by hand in this\n" "screen. Be careful as to choose the correct parameters.\n" "\n" "\n" "You may also want not to give access to these other operating systems to\n" "anyone, in which case you can delete the corresponding entries. But\n" "in this case, you will need a boot disk in order to boot them!" msgstr "" "LILO (de la LInux LOader) și Grub sunt gestionare de demaraj. Amîndoi sunt\n" "capabili să demareze Linux sau un alt sistem prezent în calculator.\n" "În mod normal, aceste alte sisteme de operare sunt detectate și instalate\n" "corect. Dacă cumva nu e cazul, puteți adăuga o intrare manual în acest\n" "ecran. Aveți grijă să alegeți parametrii cei buni.\n" "\n" "\n" "Puteți de asemenea să interziceți accesul acestor alte sisteme a altor \n" "utilizatori, caz în care ar trebui să ștergeți intrările acestor sisteme.\n" "În acest ultim caz însă, veți avea nevoie de un floppy de demaraj pentru\n" "a putea le demara!" #: ../../help.pm_.c:805 #, fuzzy msgid "" "SILO main options are:\n" " - Bootloader installation: Indicate where you want to place the\n" "information required to boot to GNU/Linux. Unless you know exactly\n" "what you are doing, choose \"First sector of drive (MBR)\".\n" "\n" "\n" " - Delay before booting default image: Specifies the number in tenths\n" "of a second the boot loader should wait before booting the first image.\n" "This is useful on systems that immediately boot from the hard disk after\n" "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n" "omitted or is set to zero." msgstr "" "Principalele opțiuni ale lui LILO și grub sunt:\n" " - Periferic de boot: parametrează numele perifericului (e.g. o partiție\n" "a unui disc dur) care conține sectorul de demaraj. În mod normal e vorba\n" "de \"/dev/hda\".\n" "\n" "\n" " - Timp de așteptare înainte de a demara imaginea din oficiu: Specifică\n" "numărul de zecimi de secundă pentru a aștepta înaintea demarării primei\n" "imagini. Acesta e foarte practic pentru sistemele care demarează de pe\n" "disc dur după activarea tastaturii. Gestionarul de demaraj nu așteaptă\n" "deloc dacă secțiunea \"delay\" e omisă sau dacă e fixată la zero.\n" "\n" "\n" " - Mod Video: Aceasta specifică modul text VGA care ar trebui selectat la\n" "demaraj. Următoarele opțiuni sunt valabile:\n" " * normal: selectați normal pentru un mod text de 80x25.\n" " * : folosiți modul text corespunzător." #: ../../help.pm_.c:818 #, fuzzy msgid "" "Now it's time to configure the X Window System, which is the\n" "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n" "you must configure your video card and monitor. Most of these\n" "steps are automated, though, therefore your work may only consist\n" "of verifying what has been done and accept the settings :)\n" "\n" "\n" "When the configuration is over, X will be started (unless you\n" "ask DrakX not to) so that you can check and see if the\n" "settings suit you. If they don't, you can come back and\n" "change them, as many times as necessary." msgstr "" "Acum e momentul să configurați Sistemul X Windows, care e inima interfaței\n" "grafice din Linux (Linux GUI de la Linux Graphical User Interface). În\n" "acest scop trebuie să configurați cartea video și monitorul. Majoritatea\n" "acestor etape sunt automatizate; deci s-ar putea ca tot ceea ce veți avea\n" "de făcut va consista în verificarea și acceptarea parametrilor :)\n" "\n" "Cînd ați terminat cu configurația, X va fi re-demarat (dar poate îi veți\n" "cere lui DrakX să nu o facă) pentru a verifica dacă noii parametrii vă\n" "convin. Dacă nu vă convin, va puteți întoarce și să-i schimbați de cîte ori\n" "e necesar." #: ../../help.pm_.c:831 msgid "" "If something is wrong in X configuration, use these options to correctly\n" "configure the X Window System." msgstr "" "Dacă ceva nu e în regulă cu configurația X, folosiți aceste opțiuni pentru\n" "a configura în mod corect Sistemul X Windows." #: ../../help.pm_.c:835 msgid "" "If you prefer to use a graphical login, select \"Yes\". Otherwise, select\n" "\"No\"." msgstr "" "Dacă preferați să folosiți un login în mod grafic, selectați \"Da\" și \n" "\"Nu\" în celălalt caz." #: ../../help.pm_.c:839 msgid "" "You can choose a security level for your system. Please refer to the manual " "for complete\n" " information. Basically, if you don't know what to choose, keep the default " "option.\n" msgstr "" #: ../../help.pm_.c:844 msgid "" "Your system is going to reboot.\n" "\n" "After rebooting, your new Linux Mandrake system will load automatically.\n" "If you want to boot into another existing operating system, please read\n" "the additional instructions." msgstr "" "Sistemul dumneavoastră e pe cale să re-demareze.\n" "\n" "După re-demaraj, noul sistem Linux-Mandrake sa va lansa automat. Dacă " "doriți\n" "să demarați un alt sistem de operare existent, vă rog citiți instrucțiunile\n" "adiționale." #: ../../install2.pm_.c:37 msgid "Choose your language" msgstr "Alegeți limba" #: ../../install2.pm_.c:38 msgid "Select installation class" msgstr "Alegeți tipul de instalare" #: ../../install2.pm_.c:39 msgid "Hard drive detection" msgstr "Detecția discului dur" #: ../../install2.pm_.c:40 msgid "Configure mouse" msgstr "Configurație mouse" #: ../../install2.pm_.c:41 msgid "Choose your keyboard" msgstr "Alegeți tastatura" #: ../../install2.pm_.c:42 #, fuzzy msgid "Security" msgstr "cîrlionțat" #: ../../install2.pm_.c:43 msgid "Setup filesystems" msgstr "Instalarea fișierelor sistem" #: ../../install2.pm_.c:44 msgid "Format partitions" msgstr "Formatarea partițiilor" #: ../../install2.pm_.c:45 msgid "Choose packages to install" msgstr "Alege pachetele de instalat" #: ../../install2.pm_.c:46 msgid "Install system" msgstr "Instalarea sistemului" #: ../../install2.pm_.c:47 ../../install_steps_interactive.pm_.c:894 #: ../../install_steps_interactive.pm_.c:895 msgid "Set root password" msgstr "Alegeți parola pentru root" #: ../../install2.pm_.c:48 msgid "Add a user" msgstr "Adăugați un utilizator" #: ../../install2.pm_.c:49 msgid "Configure networking" msgstr "Configurație rețea" #: ../../install2.pm_.c:51 ../../install_steps_interactive.pm_.c:818 msgid "Summary" msgstr "" #: ../../install2.pm_.c:52 msgid "Configure services" msgstr "Configurația serviciilor" #: ../../install2.pm_.c:54 msgid "Create a bootdisk" msgstr "Creați un floppy de demaraj" #: ../../install2.pm_.c:56 msgid "Install bootloader" msgstr "Instalați un gestionar de demaraj" #: ../../install2.pm_.c:57 msgid "Configure X" msgstr "Configurați X" #: ../../install2.pm_.c:58 msgid "Exit install" msgstr "Ieșire din instalare" #: ../../install_any.pm_.c:402 #, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They don't have any known security\n" "issues, but some new could be found. In that case, you must make sure to " "upgrade\n" "as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" msgstr "" #: ../../install_any.pm_.c:433 msgid "Can't use broadcast with no NIS domain" msgstr "Nu pot să folosesc difuzia fără nici un domeniu NIS" #: ../../install_any.pm_.c:676 #, fuzzy, c-format msgid "Insert a FAT formatted floppy in drive %s" msgstr "Introduceți o dischetă în perifericul %s" #: ../../install_any.pm_.c:680 msgid "This floppy is not FAT formatted" msgstr "" #: ../../install_any.pm_.c:690 msgid "" "To use this saved packages selection, boot installation with ``linux " "defcfg=floppy''" msgstr "" #: ../../install_any.pm_.c:712 msgid "Error reading file $f" msgstr "Eroare la citirea fișierului $f" #: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:310 #: ../../interactive.pm_.c:99 ../../interactive.pm_.c:114 #: ../../interactive.pm_.c:269 ../../interactive_newt.pm_.c:166 #: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:356 #: ../../my_gtk.pm_.c:617 ../../my_gtk.pm_.c:640 msgid "Ok" msgstr "Ok" #: ../../install_gtk.pm_.c:423 #, fuzzy msgid "Please test the mouse" msgstr "Vă rog, alegeți tipul de mouse?" #: ../../install_gtk.pm_.c:424 ../../standalone/mousedrake_.c:132 #, fuzzy msgid "To activate the mouse," msgstr "Vă rog, alegeți tipul de mouse?" #: ../../install_gtk.pm_.c:425 ../../standalone/mousedrake_.c:133 msgid "MOVE YOUR WHEEL!" msgstr "" #: ../../install_interactive.pm_.c:23 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" #: ../../install_interactive.pm_.c:41 msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" "Trebuie să aveți o partiție root.\n" "Pentru aceasta, creați o partiție (sau faceți clic pe un existentă).\n" "Alegeți apoi acțiunea ``Punct de montaj'' și fixați-o la '/'" #: ../../install_interactive.pm_.c:46 ../../install_steps_graphical.pm_.c:259 msgid "You must have a swap partition" msgstr "Trebuie să aveți o partiție swap" #: ../../install_interactive.pm_.c:47 ../../install_steps_graphical.pm_.c:261 msgid "" "You don't have a swap partition\n" "\n" "Continue anyway?" msgstr "" "N'aveți nici o partiție swap\n" "\n" "Să continui totuși?" #: ../../install_interactive.pm_.c:68 #, fuzzy msgid "Use free space" msgstr "Folosește pentru loopback" #: ../../install_interactive.pm_.c:70 msgid "Not enough free space to allocate new partitions" msgstr "" #: ../../install_interactive.pm_.c:78 #, fuzzy msgid "Use existing partition" msgstr "Formatarea partițiilor" #: ../../install_interactive.pm_.c:80 #, fuzzy msgid "There is no existing partition to use" msgstr "Încercare de salvare a tabloului de partiții" #: ../../install_interactive.pm_.c:87 #, fuzzy msgid "Use the Windows partition for loopback" msgstr "Folosește pentru loopback" #: ../../install_interactive.pm_.c:90 #, fuzzy msgid "Which partition do you want to use for Linux4Win?" msgstr "Ce partițe doriți să folosiiț pentru a instala Linux4Win?" #: ../../install_interactive.pm_.c:92 msgid "Choose the sizes" msgstr "Alegeți mărimile" #: ../../install_interactive.pm_.c:93 msgid "Root partition size in MB: " msgstr "Mărimea partiției root în MB:" #: ../../install_interactive.pm_.c:94 msgid "Swap partition size in MB: " msgstr "Mărimea partiției swap în MB:: " #: ../../install_interactive.pm_.c:102 msgid "Use the free space on the Windows partition" msgstr "" #: ../../install_interactive.pm_.c:105 #, fuzzy msgid "Which partition do you want to resize?" msgstr "Ce tip de partiție doriți?" #: ../../install_interactive.pm_.c:107 #, fuzzy msgid "Computing Windows filesystem bounds" msgstr "Calculează salturile de fișiere FAT" #: ../../install_interactive.pm_.c:110 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occured: %s" msgstr "" #: ../../install_interactive.pm_.c:113 msgid "Your Windows partition is too fragmented, please run ``defrag'' first" msgstr "" #: ../../install_interactive.pm_.c:114 #, fuzzy msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful: this operation is\n" "dangerous. If you have not already done so, you should first exit the\n" "installation, run scandisk under Windows (and optionally run defrag), then\n" "restart the installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" "AVERTISMENT!\n" "\n" "DrakX va redimensiona acum partițiile Windows. Aveți grijă: această " "operație\n" "est periculoasă. Dacă nu ați făcut-o deja, ar trebui mai întîi să părăsiți\n" "instalarea și șa executați scandisk în Windows (și defrag opțional), apio\n" "reîncepeți instalarea. Ar trebui de asemenea să faceți o copie a datelor\n" "dumneavoastră. Dacă sunteți sigur, apăsați Ok." #: ../../install_interactive.pm_.c:123 #, fuzzy msgid "Which size do you want to keep for windows on" msgstr "La ce sector doriți sa schimbați ?" #: ../../install_interactive.pm_.c:124 #, fuzzy, c-format msgid "partition %s" msgstr "Partiție" #: ../../install_interactive.pm_.c:130 #, fuzzy, c-format msgid "FAT resizing failed: %s" msgstr "Redimensionarea automată a eșuat" #: ../../install_interactive.pm_.c:145 msgid "" "There is no FAT partitions to resize or to use as loopback (or not enough " "space left)" msgstr "" #: ../../install_interactive.pm_.c:151 msgid "Erase entire disk" msgstr "" #: ../../install_interactive.pm_.c:151 msgid "Remove Windows(TM)" msgstr "" #: ../../install_interactive.pm_.c:154 msgid "You have more than one hard drive, which one do you install linux on?" msgstr "" #: ../../install_interactive.pm_.c:157 #, fuzzy, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "" "După redimensionarea partiției %s toate datele de pe aceasta partiție vor fi " "pierdute" #: ../../install_interactive.pm_.c:165 #, fuzzy msgid "Custom disk partitioning" msgstr "Formatarea partițiilor" #: ../../install_interactive.pm_.c:169 msgid "Use fdisk" msgstr "" #: ../../install_interactive.pm_.c:172 #, fuzzy, c-format msgid "" "You can now partition %s.\n" "When you are done, don't forget to save using `w'" msgstr "" "Puteți partiționa acum discul %s dumneavoastră dur\n" "Cînd ați terminat, nu uitați să înregistrați folosind `w'" #: ../../install_interactive.pm_.c:201 #, fuzzy msgid "You don't have enough free space on your Windows partition" msgstr "Nu aveți nici o partiție Windows" #: ../../install_interactive.pm_.c:217 #, fuzzy msgid "I can't find any room for installing" msgstr "Imposibil de adăugat o alta partiție" #: ../../install_interactive.pm_.c:221 msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "" #: ../../install_interactive.pm_.c:226 #, fuzzy, c-format msgid "Partitioning failed: %s" msgstr "Tipul tabloul de partiții : %s\n" #: ../../install_interactive.pm_.c:232 msgid "Bringing up the network" msgstr "Configurație rețea" #: ../../install_interactive.pm_.c:237 msgid "Bringing down the network" msgstr "Oprire rețea" #: ../../install_steps.pm_.c:73 msgid "" "An error occurred, but I don't know how to handle it nicely.\n" "Continue at your own risk." msgstr "" "A apărut o eroare pe care nu știu să o interpretez în mod corect.\n" "Continuați pe riscul dumneavoastră." #: ../../install_steps.pm_.c:203 #, c-format msgid "Duplicate mount point %s" msgstr "Duplicați pounctul de montaj %s" #: ../../install_steps.pm_.c:385 msgid "" "Some important packages didn't get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm" "\"\n" msgstr "" "Cîteva pachete importante nu s-au instalat corect.\n" "Sau aveți o problemă cu perifericul de cdrom sau cu \n" "cdrom-ul propriu-zis. Folosiți comanda \"rpm -qpl \n" "Mandrake/RPMS/*.rpm\" pentru a verifica cdrom-ul pe un\n" "sistem instalat.\n" #: ../../install_steps.pm_.c:451 #, c-format msgid "Welcome to %s" msgstr "Bine ați venit la %s" #: ../../install_steps.pm_.c:634 msgid "No floppy drive available" msgstr "Nici dischetă disponibilă" #: ../../install_steps_auto_install.pm_.c:51 #: ../../install_steps_stdio.pm_.c:23 #, c-format msgid "Entering step `%s'\n" msgstr "Începe etapa `%s'\n" #: ../../install_steps_graphical.pm_.c:287 msgid "Choose the size you want to install" msgstr "Alegeți mărimea pe care vreți să o instalați" #: ../../install_steps_graphical.pm_.c:334 msgid "Total size: " msgstr "Mârime totală: " #: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:437 #, c-format msgid "Version: %s\n" msgstr "Versiune: %s\n" #: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:438 #, c-format msgid "Size: %d KB\n" msgstr "Mărime: %d KB\n" #: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:337 #: ../../install_steps_interactive.pm_.c:520 msgid "Choose the packages you want to install" msgstr "Alegeți pachetele pe care doriți să le instalați" #: ../../install_steps_graphical.pm_.c:465 ../../install_steps_gtk.pm_.c:340 msgid "Info" msgstr "Info" #: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:345 #: ../../install_steps_interactive.pm_.c:226 msgid "Install" msgstr "Instalare" #: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:558 #: ../../install_steps_interactive.pm_.c:675 msgid "Installing" msgstr "În curs de instalare" #: ../../install_steps_graphical.pm_.c:499 msgid "Please wait, " msgstr "Asteptați, vă rog" #: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:570 msgid "Time remaining " msgstr "Timp rămas " #: ../../install_steps_graphical.pm_.c:502 msgid "Total time " msgstr "Timp total " #: ../../install_steps_graphical.pm_.c:507 #: ../../install_steps_interactive.pm_.c:675 msgid "Preparing installation" msgstr "Pregătesc instalarea" #: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:618 #, c-format msgid "Installing package %s" msgstr "Instalarea pachetului %s" #: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:695 #: ../../install_steps_gtk.pm_.c:699 msgid "Go on anyway?" msgstr "Să continui totuși?" #: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:695 msgid "There was an error ordering packages:" msgstr "O eroare a apărut la ordonarea pachetelor:" #: ../../install_steps_graphical.pm_.c:577 msgid "Use existing configuration for X11?" msgstr "Să folosesc configurația existentă pentru X11?" #: ../../install_steps_gtk.pm_.c:142 msgid "" "Your system is low on resource. You may have some problem installing\n" "Linux-Mandrake. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" #: ../../install_steps_gtk.pm_.c:156 msgid "Please, choose one of the following classes of installation:" msgstr "Vă rog alegeți unul din următoarele tipuri de instalare" #: ../../install_steps_gtk.pm_.c:222 #, c-format msgid "" "The total size for the groups you have selected is approximately %d MB.\n" msgstr "Mărimea totală a grupurilor selectate e în jur de %d MB.\n" #: ../../install_steps_gtk.pm_.c:224 #, c-format msgid "" "If you wish to install less than this size,\n" "select the percentage of packages that you want to install.\n" "\n" "A low percentage will install only the most important packages;\n" "a percentage of 100%% will install all selected packages." msgstr "" "Dacă doriți să instalați mai puțin decît această mărime,\n" "selectați procentul pachetelor pe care doriți să le instalați.\n" "\n" "Un procent slab va instala numai pachetele cele mai inmportante;\n" "un procent de 100% va instala toate pachetele selectate." #: ../../install_steps_gtk.pm_.c:229 #, c-format msgid "" "You have space on your disk for only %d%% of these packages.\n" "\n" "If you wish to install less than this,\n" "select the percentage of packages that you want to install.\n" "A low percentage will install only the most important packages;\n" "a percentage of %d%% will install as many packages as possible." msgstr "" "Nu aveți spațiu pe discul dunmeavoastră decît pentru %d%% al acestor\n" "pachete.\n" "\n" "Dacă doriți să instalați mai puțin decît atît,\n" "selectați procentul pachetelor pe care doriți săle instalați.\n" "Un procent slab nu va installa decît pachetele cele mai importante;\n" "un procent de %d%% va instala cît de multe pachete va fi posibil." #: ../../install_steps_gtk.pm_.c:235 msgid "You will be able to choose them more specifically in the next step." msgstr "Veți putea să le alegeți mai în detaliu la etapa următoare." #: ../../install_steps_gtk.pm_.c:237 msgid "Percentage of packages to install" msgstr "Procentul pachetelor de instalat" #: ../../install_steps_gtk.pm_.c:285 ../../install_steps_interactive.pm_.c:599 msgid "Package Group Selection" msgstr "Selectarea grupurilor de pachete" #: ../../install_steps_gtk.pm_.c:305 ../../install_steps_interactive.pm_.c:614 msgid "Individual package selection" msgstr "Selectare individuală a pachetelor" #: ../../install_steps_gtk.pm_.c:349 msgid "Show automatically selected packages" msgstr "" #: ../../install_steps_gtk.pm_.c:416 msgid "Expand Tree" msgstr "Expandați Arborele" #: ../../install_steps_gtk.pm_.c:417 msgid "Collapse Tree" msgstr "Închideți Arborele" #: ../../install_steps_gtk.pm_.c:418 msgid "Toggle between flat and group sorted" msgstr "Basculați între plat și triere în funcție de grup" #: ../../install_steps_gtk.pm_.c:435 msgid "Bad package" msgstr "Pachet defectuos" #: ../../install_steps_gtk.pm_.c:436 #, c-format msgid "Name: %s\n" msgstr "Nume: %s\n" #: ../../install_steps_gtk.pm_.c:439 #, c-format msgid "Importance: %s\n" msgstr "Importanță: %s\n" #: ../../install_steps_gtk.pm_.c:448 ../../install_steps_interactive.pm_.c:578 #, c-format msgid "Total size: %d / %d MB" msgstr "Mărime totală: %d / %d MB " #: ../../install_steps_gtk.pm_.c:467 msgid "" "You can't select this package as there is not enough space left to install it" msgstr "Nu aveți destul spațiu pentru a instala acest pachet" #: ../../install_steps_gtk.pm_.c:471 #, fuzzy msgid "The following packages are going to be installed" msgstr "Pachetele următoare urmează să fie dezinstalate" #: ../../install_steps_gtk.pm_.c:472 #, fuzzy msgid "The following packages are going to be removed" msgstr "Următoare pachete vor fi instalate/șterse" #: ../../install_steps_gtk.pm_.c:482 msgid "You can't select/unselect this package" msgstr "Nu puteți selecta/deselecta acest pachet" #: ../../install_steps_gtk.pm_.c:501 msgid "This is a mandatory package, it can't be unselected" msgstr "Acesta este un pachet indispensabil și nu poate fi deselectat" #: ../../install_steps_gtk.pm_.c:503 msgid "You can't unselect this package. It is already installed" msgstr "Nu puteți deselecta aces pachet. E deja instalat" #: ../../install_steps_gtk.pm_.c:507 msgid "" "This package must be upgraded\n" "Are you sure you want to deselect it?" msgstr "" "Acest pachet trebuie actualizat\n" "Sunteți sigur că doriți să-l deselectați ?" #: ../../install_steps_gtk.pm_.c:510 msgid "You can't unselect this package. It must be upgraded" msgstr "Nu puteți deselecta acest pachet. Trebuie acualizat." #: ../../install_steps_gtk.pm_.c:563 msgid "Estimating" msgstr "Estimare" #: ../../install_steps_gtk.pm_.c:582 #, fuzzy msgid "Please wait, preparing installation" msgstr "Pregătesc instalarea" #: ../../install_steps_gtk.pm_.c:613 #, c-format msgid "%d packages" msgstr "%d pachete" #: ../../install_steps_gtk.pm_.c:652 msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" #: ../../install_steps_gtk.pm_.c:680 ../../install_steps_interactive.pm_.c:163 #, fuzzy msgid "Accept" msgstr "Acceptare utilizator" #: ../../install_steps_gtk.pm_.c:680 ../../install_steps_interactive.pm_.c:163 #, fuzzy msgid "Refuse" msgstr "Redimensionează" #: ../../install_steps_gtk.pm_.c:681 #, c-format msgid "" "Change your Cd-Rom!\n" "\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you don't have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" "Schimbați Cd-Rom-ul!\n" "\n" "Vă rog introduceți Cd-Rom etichetat \"%s\" și apoi apăsați Ok.\n" "Dacă nu-l aveți, apăsați Anulează pentru a evita instalarea de pe acest Cd-" "Rom." #: ../../install_steps_gtk.pm_.c:699 msgid "There was an error installing packages:" msgstr "A fost o eroare la instalarea pachetelor:" #: ../../install_steps_interactive.pm_.c:37 msgid "An error occurred" msgstr "A apărut o eroare" #: ../../install_steps_interactive.pm_.c:55 msgid "Please, choose a language to use." msgstr "Vă rog, alegeți o limbă." #: ../../install_steps_interactive.pm_.c:56 msgid "You can choose other languages that will be available after install" msgstr "Puteți să alegeți alte limbi care vor fi disponibile după instalare" #: ../../install_steps_interactive.pm_.c:68 #: ../../install_steps_interactive.pm_.c:613 msgid "All" msgstr "" #: ../../install_steps_interactive.pm_.c:86 msgid "License agreement" msgstr "" #: ../../install_steps_interactive.pm_.c:87 msgid "" "Introduction\n" "\n" "The operating system and the different components available in the Linux-" "Mandrake distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Linux-Mandrake distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read carefully this document. This document is a license agreement " "between you and \n" "MandrakeSoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if MandrakeSoft S.A. has been advised of the possibility or " "occurance of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Linux-Mandrake sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to MandrakeSoft.\n" "The programs developed by MandrakeSoft S.A. are governed by the GPL License. " "Documentation written \n" "by MandrakeSoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Linux-Mandrake\" and associated logos are trademarks of " "MandrakeSoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact MandrakeSoft S.A. \n" msgstr "" #: ../../install_steps_interactive.pm_.c:182 #: ../../install_steps_interactive.pm_.c:822 #: ../../standalone/keyboarddrake_.c:28 msgid "Keyboard" msgstr "Tastatură" #: ../../install_steps_interactive.pm_.c:183 #: ../../standalone/keyboarddrake_.c:29 msgid "Please, choose your keyboard layout." msgstr "Alegeți tastatura." #: ../../install_steps_interactive.pm_.c:184 msgid "Here is the full list of keyboards available" msgstr "" #: ../../install_steps_interactive.pm_.c:201 msgid "Install Class" msgstr "Tip de instalare" #: ../../install_steps_interactive.pm_.c:201 msgid "Which installation class do you want?" msgstr "Ce tip de instalare doriți?" #: ../../install_steps_interactive.pm_.c:203 #, fuzzy msgid "Install/Update" msgstr "Instalare/Actualizare" #: ../../install_steps_interactive.pm_.c:203 #, fuzzy msgid "Is this an install or an update?" msgstr "Este vorba de o instalare sau de o actualizare ?" #: ../../install_steps_interactive.pm_.c:212 msgid "Recommended" msgstr "Recomandat" #: ../../install_steps_interactive.pm_.c:215 #: ../../install_steps_interactive.pm_.c:218 msgid "Expert" msgstr "Expert" #: ../../install_steps_interactive.pm_.c:226 #, fuzzy msgid "Update" msgstr "Actualizare" #: ../../install_steps_interactive.pm_.c:238 ../../standalone/mousedrake_.c:41 msgid "Please, choose the type of your mouse." msgstr "Vă rog, alegeți tipul de mouse?" #: ../../install_steps_interactive.pm_.c:244 ../../standalone/mousedrake_.c:57 msgid "Mouse Port" msgstr "Port Mouse" #: ../../install_steps_interactive.pm_.c:245 ../../standalone/mousedrake_.c:58 msgid "Please choose on which serial port your mouse is connected to." msgstr "Pe ce port serie este conectat mouse-ul?" #: ../../install_steps_interactive.pm_.c:253 msgid "Buttons emulation" msgstr "" #: ../../install_steps_interactive.pm_.c:255 msgid "Button 2 Emulation" msgstr "" #: ../../install_steps_interactive.pm_.c:256 msgid "Button 3 Emulation" msgstr "" #: ../../install_steps_interactive.pm_.c:275 msgid "Configuring PCMCIA cards..." msgstr "Configurație cartele PCMCIA..." #: ../../install_steps_interactive.pm_.c:275 msgid "PCMCIA" msgstr "PCMCIA" #: ../../install_steps_interactive.pm_.c:280 msgid "Configuring IDE" msgstr "Configurația IDE" #: ../../install_steps_interactive.pm_.c:280 msgid "IDE" msgstr "IDE" #: ../../install_steps_interactive.pm_.c:295 msgid "no available partitions" msgstr "nici o partiție disponibilă" #: ../../install_steps_interactive.pm_.c:298 msgid "Scanning partitions to find mount points" msgstr "" #: ../../install_steps_interactive.pm_.c:306 msgid "Choose the mount points" msgstr "Alegeți punctele de montaj" #: ../../install_steps_interactive.pm_.c:323 #, fuzzy, c-format msgid "" "I can't read your partition table, it's too corrupted for me :(\n" "I can try to go on blanking bad partitions (ALL DATA will be lost!).\n" "The other solution is to disallow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to loose all the partitions?\n" msgstr "" "Nu pot citi tabloul de partiții, e prea deteriorat după mine :(\n" "Voi încerca să continui ștergînd partițiile greșite" #: ../../install_steps_interactive.pm_.c:336 msgid "" "DiskDrake failed to read correctly the partition table.\n" "Continue at your own risk!" msgstr "" "DiskDrake a eșuat la citirea corectă a tabloului de partiții.\n" "Continuați pe riscul dumneavoastră!" #: ../../install_steps_interactive.pm_.c:361 msgid "Root Partition" msgstr "Partiția Root" #: ../../install_steps_interactive.pm_.c:362 msgid "What is the root partition (/) of your system?" msgstr "Care e partiția root (/) a sistemului dumneavoastră?" #: ../../install_steps_interactive.pm_.c:376 msgid "You need to reboot for the partition table modifications to take place" msgstr "" "Trebuie să redemarați pentru a înregistra modificările tabloului de partiții" #: ../../install_steps_interactive.pm_.c:403 msgid "Choose the partitions you want to format" msgstr "Alegeți partițiile pe care doriți sa le formataăi" #: ../../install_steps_interactive.pm_.c:404 msgid "Check bad blocks?" msgstr "Să verific blocurile defectuoase?" #: ../../install_steps_interactive.pm_.c:427 msgid "Formatting partitions" msgstr "Formatarea partițiilor" #: ../../install_steps_interactive.pm_.c:429 #, c-format msgid "Creating and formatting file %s" msgstr "Crearea și formatarea fișierului %s" #: ../../install_steps_interactive.pm_.c:432 msgid "Not enough swap to fulfill installation, please add some" msgstr "Swap insuficient pentru a termina instalarea, mai adăugați ceva" #: ../../install_steps_interactive.pm_.c:438 msgid "Looking for available packages" msgstr "Căutarea pachetelor disponibile" #: ../../install_steps_interactive.pm_.c:444 msgid "Finding packages to upgrade" msgstr "Cautarea pachetelor de actualizat" #: ../../install_steps_interactive.pm_.c:461 #, fuzzy, c-format msgid "" "Your system has not enough space left for installation or upgrade (%d > %d)" msgstr "" "Sistemul dumneavoastră nu ar destul spațiu disponibil pentru instalare\n" "sau actualizare" #: ../../install_steps_interactive.pm_.c:480 #, fuzzy, c-format msgid "Complete (%dMB)" msgstr "Normal" #: ../../install_steps_interactive.pm_.c:480 #, fuzzy, c-format msgid "Minimum (%dMB)" msgstr "(%dMB)" #: ../../install_steps_interactive.pm_.c:480 #, fuzzy, c-format msgid "Recommended (%dMB)" msgstr "Recomandat" #: ../../install_steps_interactive.pm_.c:486 #, fuzzy msgid "Custom" msgstr "Personalizat" #: ../../install_steps_interactive.pm_.c:585 msgid "Selected size is larger than available space" msgstr "" #: ../../install_steps_interactive.pm_.c:650 msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" "Dacă aveți toate CD-urile din lista de mai jos, apăsați Ok.\n" "Dacă nu aveți nici unul din aceste CD-uri, apăsați Anulează.\n" "Dacă nu vă lispsesc decît cîteva CD-uri, deselectați-le și faceți click pe " "Ok." #: ../../install_steps_interactive.pm_.c:655 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "Cd-Rom etichetat \"%s\"" #: ../../install_steps_interactive.pm_.c:684 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" "instalarea pachetului %s\n" "%d%%" #: ../../install_steps_interactive.pm_.c:693 msgid "Post-install configuration" msgstr "Configurație post-install" #: ../../install_steps_interactive.pm_.c:718 msgid "" "You have now the possibility to download software aimed for encryption.\n" "\n" "WARNING:\n" "\n" "Due to different general requirements applicable to these software and " "imposed\n" "by various jurisdictions, customer and/or end user of theses software " "should\n" "ensure that the laws of his/their jurisdiction allow him/them to download, " "stock\n" "and/or use these software.\n" "\n" "In addition customer and/or end user shall particularly be aware to not " "infringe\n" "the laws of his/their jurisdiction. Should customer and/or end user not\n" "respect the provision of these applicable laws, he/they will incure serious\n" "sanctions.\n" "\n" "In no event shall Mandrakesoft nor its manufacturers and/or suppliers be " "liable\n" "for special, indirect or incidental damages whatsoever (including, but not\n" "limited to loss of profits, business interruption, loss of commercial data " "and\n" "other pecuniary losses, and eventual liabilities and indemnification to be " "paid\n" "pursuant to a court decision) arising out of use, possession, or the sole\n" "downloading of these software, to which customer and/or end user could\n" "eventually have access after having sign up the present agreement.\n" "\n" "\n" "For any queries relating to these agreement, please contact \n" "Mandrakesoft, Inc.\n" "2400 N. Lincoln Avenue Suite 243\n" "Altadena California 91001\n" "USA" msgstr "" "Aveți acum posibilitatea de a recupera de pe Internet programele destinate\n" "criptajului.\n" "\n" "AVERTISMENT:\n" "\n" "Din cauza diferitelor cerințe generale aplicabile la aceste programe în\n" "funcție de diferite jurisdicții, clientul și/sau utilizatorul final al\n" "acestor programe ar trebui să se asigure că jurisdicția îi permite să\n" "folosească sau să stocheze aceste programe.\n" "\n" "Încălcarea eventuală a unei interziceri în acest domeniu ar putea să fie\n" "sacționată sever de jurisdicția dumneavoastră.\n" "\n" "În nici un caz MandrakeSoft sau unul dintre fabricanții săi și/sau\n" "furnizorii săi n'ar putea să poarte responsabilitatea unor deteriorări\n" "indirecte sau accidentale (incluzînd, dar fără as e limita la pierderi\n" "sau profituri, întreruperi de afaceri, pierdere a datelor comerciale și\n" "alte pierderi și unele indemnizări eventuale din cauza unor decizii)\n" "suscitate în urma folosirii, posesiei, sau a simplei recuperări a acestor\n" "programe, la care clientul sau/și utilizatorul final ar avea acces după\n" "acceptarea prezentului acord.\n" "\n" "\n" "Pentru orice întrebări cu privire a acestui acord, vă rog contactați\n" "Mandrakesoft, Inc.\n" "2400 N. Lincoln Avenue Suite 243\n" "Altadena California 91001\n" "USA" #: ../../install_steps_interactive.pm_.c:750 msgid "Choose a mirror from which to get the packages" msgstr "Alegeți o oglindă de la care să recuperați pachetele" #: ../../install_steps_interactive.pm_.c:761 msgid "Contacting the mirror to get the list of available packages" msgstr "Contactarea oglinzii pentru recuperarea pachetelor disponibile" #: ../../install_steps_interactive.pm_.c:764 msgid "Please choose the packages you want to install." msgstr "Vă rog alegeți pachetele pe care doriți să le instalați" #: ../../install_steps_interactive.pm_.c:776 #, fuzzy msgid "Which is your timezone?" msgstr "Care e folosința sistemului dumneavoastră?" #: ../../install_steps_interactive.pm_.c:778 msgid "Is your hardware clock set to GMT?" msgstr "Ceasul dumneavoastră hardware e fixat la GMT?" #: ../../install_steps_interactive.pm_.c:806 ../../printer.pm_.c:22 #: ../../printerdrake.pm_.c:415 #, fuzzy msgid "Remote CUPS server" msgstr "Coadă distantă:" #: ../../install_steps_interactive.pm_.c:807 #, fuzzy msgid "No printer" msgstr "Imprimantă locală" #: ../../install_steps_interactive.pm_.c:821 #, fuzzy msgid "Mouse" msgstr "Mouse USB" #: ../../install_steps_interactive.pm_.c:823 msgid "Timezone" msgstr "" #: ../../install_steps_interactive.pm_.c:824 ../../printerdrake.pm_.c:344 msgid "Printer" msgstr "Imprimantă" #: ../../install_steps_interactive.pm_.c:826 msgid "ISDN card" msgstr "" #: ../../install_steps_interactive.pm_.c:829 msgid "Sound card" msgstr "" #: ../../install_steps_interactive.pm_.c:832 msgid "TV card" msgstr "" #: ../../install_steps_interactive.pm_.c:862 #, fuzzy msgid "Which printing system do you want to use?" msgstr "Ce tip de partiție doriți?" #: ../../install_steps_interactive.pm_.c:896 msgid "No password" msgstr "Nici o parolă" #: ../../install_steps_interactive.pm_.c:901 #, c-format msgid "This password is too simple (must be at least %d characters long)" msgstr "" "Această parole e prea simplă (ar trebui să fie de cel puțin %d caractere)" #: ../../install_steps_interactive.pm_.c:907 msgid "Use NIS" msgstr "Folosește NIS" #: ../../install_steps_interactive.pm_.c:907 msgid "yellow pages" msgstr "Pagini galbene" #: ../../install_steps_interactive.pm_.c:914 msgid "Authentification NIS" msgstr "Autentificare NIS" #: ../../install_steps_interactive.pm_.c:915 msgid "NIS Domain" msgstr "Domeniu NIS" #: ../../install_steps_interactive.pm_.c:916 msgid "NIS Server" msgstr "Server NIS" #: ../../install_steps_interactive.pm_.c:951 #, fuzzy msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "SILO on your system, or another operating system removes SILO, or SILO " "doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures.\n" "\n" "If you want to create a bootdisk for your system, insert a floppy in the " "first\n" "drive and press \"Ok\"." msgstr "" "O dischetă personalizată de demaraj permite un mod de a accede la sistemul\n" "vostru Linux fără a depinde de gestionarul de demaraj normal. Acesta este \n" "util dacă nu doriți să instalați LILO (sau grub) în sistem sau dacâ alte \n" "sisteme șterg LILO sau dacă LILO nu funcționează în sistemul dumneavoastră.\n" "O dischetă personalizată poate fi de asemena folosită ca o imagine de\n" "depanaj, ceea ce permite recuperări mult mai ușoare în urmă unor pane " "severe.\n" "Doriți să creați o dischetă de demaraj pentru sistemul dumneavoastră ?" #: ../../install_steps_interactive.pm_.c:967 msgid "First floppy drive" msgstr "Primul periferic de dichetă" #: ../../install_steps_interactive.pm_.c:968 msgid "Second floppy drive" msgstr "Al doilea periferic de dischetă" #: ../../install_steps_interactive.pm_.c:969 msgid "Skip" msgstr "Sari peste" #: ../../install_steps_interactive.pm_.c:974 msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "LILO (or grub) on your system, or another operating system removes LILO, or " "LILO doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures. Would you like to create a bootdisk for your system?" msgstr "" "O dischetă personalizată de demaraj permite un mod de a accede la sistemul\n" "vostru Linux fără a depinde de gestionarul de demaraj normal. Acesta este \n" "util dacă nu doriți să instalați LILO (sau grub) în sistem sau dacâ alte \n" "sisteme șterg LILO sau dacă LILO nu funcționează în sistemul dumneavoastră.\n" "O dischetă personalizată poate fi de asemena folosită ca o imagine de\n" "depanaj, ceea ce permite recuperări mult mai ușoare în urmă unor pane " "severe.\n" "Doriți să creați o dischetă de demaraj pentru sistemul dumneavoastră ?" #: ../../install_steps_interactive.pm_.c:983 msgid "Sorry, no floppy drive available" msgstr "Îmi pare rău dar nu găsesc nici un periferic de dischetă disponibil." #: ../../install_steps_interactive.pm_.c:987 msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr "" "Alegeți perifericul pe care-l doriți pentru a realiza un disc de demaraj." #: ../../install_steps_interactive.pm_.c:991 #, c-format msgid "Insert a floppy in drive %s" msgstr "Introduceți o dischetă în perifericul %s" #: ../../install_steps_interactive.pm_.c:994 msgid "Creating bootdisk" msgstr "Crearea dischetei de demaraj" #: ../../install_steps_interactive.pm_.c:1001 msgid "Preparing bootloader" msgstr "Pegătirea gestionalului de demaraj" #: ../../install_steps_interactive.pm_.c:1010 #, fuzzy msgid "Do you want to use aboot?" msgstr "Vreți să folosiți SILO?" #: ../../install_steps_interactive.pm_.c:1013 msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" "Eroare la instalrea lui aboot,\n" "să încerc să forțați instalarea chiar dacă aceasta distruge prima partiție ?" #: ../../install_steps_interactive.pm_.c:1022 #, fuzzy msgid "Installation of bootloader failed. The following error occured:" msgstr "Instalarea lui LILO a eșuat. Următoarea eroare a apărut:" #: ../../install_steps_interactive.pm_.c:1030 msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you don't see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device $of_boot,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" #: ../../install_steps_interactive.pm_.c:1038 ../../standalone/draksec_.c:23 msgid "Low" msgstr "Scăzut" #: ../../install_steps_interactive.pm_.c:1039 ../../standalone/draksec_.c:24 msgid "Medium" msgstr "Mediu" #: ../../install_steps_interactive.pm_.c:1040 ../../standalone/draksec_.c:25 msgid "High" msgstr "Ridicat" #: ../../install_steps_interactive.pm_.c:1044 ../../standalone/draksec_.c:49 msgid "Choose security level" msgstr "Alegeți nivelul de securitate" #: ../../install_steps_interactive.pm_.c:1080 msgid "Do you want to generate an auto install floppy for linux replication?" msgstr "Doriți să creați un floppy pentru o instalare automată de replicare?" #: ../../install_steps_interactive.pm_.c:1082 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "Introduceți uo dischetă goală în perifericul %s" #: ../../install_steps_interactive.pm_.c:1096 #: ../../install_steps_interactive.pm_.c:1128 msgid "Creating auto install floppy" msgstr "Creati discheta de autoinstalare" #: ../../install_steps_interactive.pm_.c:1156 msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" "Cîteva etape nu au fost completate.\n" "\n" "Chiar vreți să terminați acum?" #: ../../install_steps_interactive.pm_.c:1167 msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "For information on fixes which are available for this release of Linux-" "Mandrake,\n" "consult the Errata available from http://www.linux-mandrake.com/.\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Linux-Mandrake User's Guide." msgstr "" "Felicitări, instalarea e completă.\n" "Scoateți media de demaraj și apăsați Enter pentru redemaraj.\n" "\n" "Pentru informații asupra corecții disponibile pentru aceasta versiune\n" "Linux-Mandrake, consultați Erata disponibilă la http://www.linux-mandrake." "com/.\n" "\n" "Informațiile asupra configurării sistemului sunt disponibile în \n" "capitolul referitor la post instalare din \n" "Oficial Linux Mandrake User's Guide." #: ../../install_steps_interactive.pm_.c:1179 #, fuzzy msgid "Generate auto install floppy" msgstr "Creati discheta de autoinstalare" #: ../../install_steps_interactive.pm_.c:1181 msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" msgstr "" #: ../../install_steps_interactive.pm_.c:1186 msgid "Automated" msgstr "Automatizat" #: ../../install_steps_interactive.pm_.c:1186 #, fuzzy msgid "Replay" msgstr "Reîncarcă" #: ../../install_steps_interactive.pm_.c:1189 #, fuzzy msgid "Save packages selection" msgstr "Selectare individuală a pachetelor" #: ../../install_steps_newt.pm_.c:22 #, c-format msgid "Linux-Mandrake Installation %s" msgstr "Instalare Linux-Mandrake %s" #: ../../install_steps_newt.pm_.c:33 msgid "" " / between elements | selects | next screen " msgstr "" " / între elemente | selectează | următorul ecran" #: ../../interactive.pm_.c:65 msgid "kdesu missing" msgstr "" #: ../../interactive.pm_.c:267 msgid "Advanced" msgstr "" #: ../../interactive.pm_.c:290 msgid "Please wait" msgstr "Puțintică răbdare" #: ../../interactive_stdio.pm_.c:35 #, c-format msgid "Ambiguity (%s), be more precise\n" msgstr "Ambiguitate (%s), fiți mai precis\n" #: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51 #: ../../interactive_stdio.pm_.c:71 msgid "Bad choice, try again\n" msgstr "Alegere greșită, încercați din nou\n" #: ../../interactive_stdio.pm_.c:39 #, c-format msgid " ? (default %s) " msgstr " ? (din oficiu %s) " #: ../../interactive_stdio.pm_.c:52 #, c-format msgid "Your choice? (default %s) " msgstr "Ce alegeți? (din oficiu %s) " #: ../../interactive_stdio.pm_.c:72 #, c-format msgid "Your choice? (default %s enter `none' for none) " msgstr "Ce alegeți ? (din oficiu %s enter `niciuna' pentru niciuna) " #: ../../keyboard.pm_.c:124 ../../keyboard.pm_.c:155 msgid "Czech (QWERTZ)" msgstr "Ceh (QWERTZ)" #: ../../keyboard.pm_.c:125 ../../keyboard.pm_.c:138 ../../keyboard.pm_.c:158 msgid "German" msgstr "German" #: ../../keyboard.pm_.c:126 msgid "Dvorak" msgstr "Dvorak" #: ../../keyboard.pm_.c:127 ../../keyboard.pm_.c:164 msgid "Spanish" msgstr "Spaniol" #: ../../keyboard.pm_.c:128 ../../keyboard.pm_.c:165 msgid "Finnish" msgstr "Finlandez" #: ../../keyboard.pm_.c:129 ../../keyboard.pm_.c:139 ../../keyboard.pm_.c:166 msgid "French" msgstr "Francez" #: ../../keyboard.pm_.c:130 ../../keyboard.pm_.c:187 msgid "Norwegian" msgstr "Norvegian" #: ../../keyboard.pm_.c:131 msgid "Polish" msgstr "Polonez" #: ../../keyboard.pm_.c:132 ../../keyboard.pm_.c:192 msgid "Russian" msgstr "Rus" #: ../../keyboard.pm_.c:133 ../../keyboard.pm_.c:203 msgid "UK keyboard" msgstr "Tastatura UK" #: ../../keyboard.pm_.c:134 ../../keyboard.pm_.c:137 ../../keyboard.pm_.c:204 msgid "US keyboard" msgstr "Tastatura US" #: ../../keyboard.pm_.c:141 msgid "Armenian (old)" msgstr "Armenian (vechi)" #: ../../keyboard.pm_.c:142 msgid "Armenian (typewriter)" msgstr "Armenian (mașină de scris)" #: ../../keyboard.pm_.c:143 msgid "Armenian (phonetic)" msgstr "Armenian (fonetic)" #: ../../keyboard.pm_.c:147 msgid "Azerbaidjani (latin)" msgstr "" #: ../../keyboard.pm_.c:148 msgid "Azerbaidjani (cyrillic)" msgstr "" #: ../../keyboard.pm_.c:149 msgid "Belgian" msgstr "Belgian" #: ../../keyboard.pm_.c:150 msgid "Bulgarian" msgstr "Bulgar" #: ../../keyboard.pm_.c:151 msgid "Brazilian (ABNT-2)" msgstr "Brazilian (ABNT-2)" #: ../../keyboard.pm_.c:152 msgid "Belarusian" msgstr "Bielorus" #: ../../keyboard.pm_.c:153 msgid "Swiss (German layout)" msgstr "Elvețian (dispoziție germanâ)" #: ../../keyboard.pm_.c:154 msgid "Swiss (French layout)" msgstr "Elvețian (dispoziție francezâ)" #: ../../keyboard.pm_.c:156 msgid "Czech (QWERTY)" msgstr "Ceh (QWERTY)" #: ../../keyboard.pm_.c:157 msgid "Czech (Programmers)" msgstr "" #: ../../keyboard.pm_.c:159 msgid "German (no dead keys)" msgstr "German (făra taste moarte)" #: ../../keyboard.pm_.c:160 msgid "Danish" msgstr "Danez" #: ../../keyboard.pm_.c:161 #, fuzzy msgid "Dvorak (US)" msgstr "Dvorak" #: ../../keyboard.pm_.c:162 #, fuzzy msgid "Dvorak (Norwegian)" msgstr "Norvegian" #: ../../keyboard.pm_.c:163 msgid "Estonian" msgstr "Estonian" #: ../../keyboard.pm_.c:167 msgid "Georgian (\"Russian\" layout)" msgstr "Georgian (dispoziție \"Rusă\")" #: ../../keyboard.pm_.c:168 msgid "Georgian (\"Latin\" layout)" msgstr "Georgian (dispoziție \"Latină\")" #: ../../keyboard.pm_.c:169 msgid "Greek" msgstr "Grec" #: ../../keyboard.pm_.c:170 msgid "Hungarian" msgstr "Ungar" #: ../../keyboard.pm_.c:171 msgid "Croatian" msgstr "Croat" #: ../../keyboard.pm_.c:172 msgid "Israeli" msgstr "Izraelian" #: ../../keyboard.pm_.c:173 msgid "Israeli (Phonetic)" msgstr "Izraelian (fonetic)" #: ../../keyboard.pm_.c:174 #, fuzzy msgid "Iranian" msgstr "Ukrainian" #: ../../keyboard.pm_.c:175 msgid "Icelandic" msgstr "Islandez" #: ../../keyboard.pm_.c:176 msgid "Italian" msgstr "Italian" #: ../../keyboard.pm_.c:177 msgid "Japanese 106 keys" msgstr "" #: ../../keyboard.pm_.c:178 #, fuzzy msgid "Korean keyboard" msgstr "Tastatura UK" #: ../../keyboard.pm_.c:179 msgid "Latin American" msgstr "Latin American" #: ../../keyboard.pm_.c:180 msgid "Macedonian" msgstr "" #: ../../keyboard.pm_.c:181 msgid "Dutch" msgstr "Olandez" #: ../../keyboard.pm_.c:182 msgid "Lithuanian AZERTY (old)" msgstr "Lituanian AZERTY (vechi)" #: ../../keyboard.pm_.c:184 msgid "Lithuanian AZERTY (new)" msgstr "Lituanian AZERTY (nou)" #: ../../keyboard.pm_.c:185 msgid "Lithuanian \"number row\" QWERTY" msgstr "Lituanian QWERTY" #: ../../keyboard.pm_.c:186 msgid "Lithuanian \"phonetic\" QWERTY" msgstr "Lithuanian \"fonetic\" QWERTY" #: ../../keyboard.pm_.c:188 msgid "Polish (qwerty layout)" msgstr "Polonez (dispoziție qwerty)" #: ../../keyboard.pm_.c:189 msgid "Polish (qwertz layout)" msgstr "Polonez (dispoziție qwertz)" #: ../../keyboard.pm_.c:190 msgid "Portuguese" msgstr "Portughez" #: ../../keyboard.pm_.c:191 msgid "Canadian (Quebec)" msgstr "Canadian (Quebec)" #: ../../keyboard.pm_.c:193 msgid "Russian (Yawerty)" msgstr "us (Yawerty)" #: ../../keyboard.pm_.c:194 msgid "Swedish" msgstr "Suedez" #: ../../keyboard.pm_.c:195 msgid "Slovenian" msgstr "Sloven" #: ../../keyboard.pm_.c:196 msgid "Slovakian (QWERTZ)" msgstr "Slovac (QWERTZ)" #: ../../keyboard.pm_.c:197 msgid "Slovakian (QWERTY)" msgstr "Slovac (QWERTY)" #: ../../keyboard.pm_.c:198 msgid "Slovakian (Programmers)" msgstr "" #: ../../keyboard.pm_.c:199 msgid "Thai keyboard" msgstr "Tastatură Thai" #: ../../keyboard.pm_.c:200 msgid "Turkish (traditional \"F\" model)" msgstr "Turc (tradițional model \"F\")" #: ../../keyboard.pm_.c:201 msgid "Turkish (modern \"Q\" model)" msgstr "Turc (model \"Q\" modern)" #: ../../keyboard.pm_.c:202 msgid "Ukrainian" msgstr "Ukrainian" #: ../../keyboard.pm_.c:205 msgid "US keyboard (international)" msgstr "Tastatură US (internațional)" #: ../../keyboard.pm_.c:206 #, fuzzy msgid "Vietnamese \"numeric row\" QWERTY" msgstr "Lituanian QWERTY" #: ../../keyboard.pm_.c:207 #, fuzzy msgid "Yugoslavian (latin/cyrillic)" msgstr "Iugoslav (dispoziție latinâ)" #: ../../lvm.pm_.c:70 msgid "Remove the logical volumes first\n" msgstr "" #: ../../mouse.pm_.c:25 msgid "Sun - Mouse" msgstr "Mouse - Sun" #: ../../mouse.pm_.c:31 msgid "Standard" msgstr "" #: ../../mouse.pm_.c:32 msgid "Logitech MouseMan+" msgstr "Logitech MouseMan+" #: ../../mouse.pm_.c:33 #, fuzzy msgid "Generic PS2 Wheel Mouse" msgstr "Mouse PS/2 generic" #: ../../mouse.pm_.c:34 msgid "GlidePoint" msgstr "GlidePoint" #: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62 msgid "Kensington Thinking Mouse" msgstr "Kensington Thinking Mouse" #: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58 msgid "Genius NetMouse" msgstr "Genius NetMouse" #: ../../mouse.pm_.c:38 msgid "Genius NetScroll" msgstr "Genius NetScroll" #: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67 msgid "1 button" msgstr "" #: ../../mouse.pm_.c:44 msgid "Generic" msgstr "Generic" #: ../../mouse.pm_.c:45 #, fuzzy msgid "Wheel" msgstr "nivel" #: ../../mouse.pm_.c:48 msgid "serial" msgstr "serie" #: ../../mouse.pm_.c:50 msgid "Generic 2 Button Mouse" msgstr "Mouse generic cu 2 butoane" #: ../../mouse.pm_.c:51 msgid "Generic 3 Button Mouse" msgstr "Mouse generic cu 3 butoane" #: ../../mouse.pm_.c:52 msgid "Microsoft IntelliMouse" msgstr "Microsoft IntelliMouse" #: ../../mouse.pm_.c:53 msgid "Logitech MouseMan" msgstr "Logitech MouseMan" #: ../../mouse.pm_.c:54 msgid "Mouse Systems" msgstr "Mouse Systems" #: ../../mouse.pm_.c:56 msgid "Logitech CC Series" msgstr "Logitech CC Series" #: ../../mouse.pm_.c:57 msgid "Logitech MouseMan+/FirstMouse+" msgstr "Logitech MouseMan+/FirstMouse+" #: ../../mouse.pm_.c:59 msgid "MM Series" msgstr "MM Series" #: ../../mouse.pm_.c:60 msgid "MM HitTablet" msgstr "MM HitTablet" #: ../../mouse.pm_.c:61 msgid "Logitech Mouse (serial, old C7 type)" msgstr "Logitech Mouse (serie, tip vechi C7)" #: ../../mouse.pm_.c:65 #, fuzzy msgid "busmouse" msgstr "Fără mouse" #: ../../mouse.pm_.c:68 msgid "2 buttons" msgstr "" #: ../../mouse.pm_.c:69 msgid "3 buttons" msgstr "" #: ../../mouse.pm_.c:72 msgid "none" msgstr "nici unul" #: ../../mouse.pm_.c:74 msgid "No mouse" msgstr "Fără mouse" #: ../../my_gtk.pm_.c:356 #, fuzzy msgid "Finish" msgstr "Finlandez" #: ../../my_gtk.pm_.c:356 msgid "Next ->" msgstr "" #: ../../my_gtk.pm_.c:357 msgid "<- Previous" msgstr "" #: ../../my_gtk.pm_.c:617 msgid "Is this correct?" msgstr "E corect ?" #: ../../netconnect.pm_.c:143 #, fuzzy msgid "Internet configuration" msgstr "Configurație proxy" #: ../../netconnect.pm_.c:144 #, fuzzy msgid "Do you want to try to connect to the Internet now?" msgstr "Doriți să testați configurația ?" #: ../../netconnect.pm_.c:148 #, fuzzy msgid "Testing your connection..." msgstr "Configurație rețea" #: ../../netconnect.pm_.c:154 ../../standalone/draknet_.c:196 #, fuzzy msgid "The system is now connected to Internet." msgstr "Pe ce disc doriți să schimbați ?" #: ../../netconnect.pm_.c:155 msgid "For Security reason, it will be disconnected now." msgstr "" #: ../../netconnect.pm_.c:156 ../../standalone/draknet_.c:196 #, fuzzy msgid "" "The system doesn't seem to be connected to internet.\n" "Try to reconfigure your connection." msgstr "Nume de conexiune" #: ../../netconnect.pm_.c:161 ../../netconnect.pm_.c:904 #: ../../netconnect.pm_.c:934 ../../netconnect.pm_.c:1012 msgid "Network Configuration" msgstr "Configurația rețelei" #: ../../netconnect.pm_.c:222 ../../netconnect.pm_.c:266 #: ../../netconnect.pm_.c:276 ../../netconnect.pm_.c:283 #: ../../netconnect.pm_.c:293 #, fuzzy msgid "ISDN Configuration" msgstr "Configurație" #: ../../netconnect.pm_.c:222 msgid "" "Select your provider.\n" " If it's not in the list, choose Unlisted" msgstr "" #: ../../netconnect.pm_.c:236 #, fuzzy msgid "Connection Configuration" msgstr "Configurație proxy" #: ../../netconnect.pm_.c:237 msgid "Please fill or check the field below" msgstr "" #: ../../netconnect.pm_.c:239 ../../standalone/draknet_.c:552 msgid "Card IRQ" msgstr "" #: ../../netconnect.pm_.c:240 ../../standalone/draknet_.c:553 msgid "Card mem (DMA)" msgstr "" #: ../../netconnect.pm_.c:241 ../../standalone/draknet_.c:554 msgid "Card IO" msgstr "" #: ../../netconnect.pm_.c:242 ../../standalone/draknet_.c:555 msgid "Card IO_0" msgstr "" #: ../../netconnect.pm_.c:243 ../../standalone/draknet_.c:556 msgid "Card IO_1" msgstr "" #: ../../netconnect.pm_.c:244 ../../standalone/draknet_.c:557 msgid "Your personal phone number" msgstr "" #: ../../netconnect.pm_.c:245 ../../standalone/draknet_.c:558 msgid "Provider name (ex provider.net)" msgstr "" #: ../../netconnect.pm_.c:246 ../../standalone/draknet_.c:559 #, fuzzy msgid "Provider phone number" msgstr "Număr de telefon" #: ../../netconnect.pm_.c:247 msgid "Provider dns 1" msgstr "" #: ../../netconnect.pm_.c:248 msgid "Provider dns 2" msgstr "" #: ../../netconnect.pm_.c:249 ../../standalone/draknet_.c:564 #, fuzzy msgid "Dialing mode" msgstr "Nume de domeniu" #: ../../netconnect.pm_.c:250 ../../standalone/draknet_.c:562 #, fuzzy msgid "Account Login (user name)" msgstr "Punct de montaj" #: ../../netconnect.pm_.c:251 ../../standalone/draknet_.c:563 #, fuzzy msgid "Account Password" msgstr "Parola" #: ../../netconnect.pm_.c:261 msgid "Europe" msgstr "" #: ../../netconnect.pm_.c:261 msgid "Europe (EDSS1)" msgstr "" #: ../../netconnect.pm_.c:263 #, fuzzy msgid "Rest of the world" msgstr "Test de configurație" #: ../../netconnect.pm_.c:263 msgid "" "Rest of the world \n" " no D-Channel (leased lines)" msgstr "" #: ../../netconnect.pm_.c:267 #, fuzzy msgid "Which protocol do you want to use ?" msgstr "Ce tip de partiție doriți?" #: ../../netconnect.pm_.c:277 #, fuzzy msgid "What kind of card do you have?" msgstr "Ce tip de imprimanta aveți?" #: ../../netconnect.pm_.c:278 msgid "I don't know" msgstr "" #: ../../netconnect.pm_.c:278 #, fuzzy msgid "ISA / PCMCIA" msgstr "PCMCIA" #: ../../netconnect.pm_.c:278 #, fuzzy msgid "PCI" msgstr "PCMCIA" #: ../../netconnect.pm_.c:284 msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the irq and io of your card.\n" msgstr "" #: ../../netconnect.pm_.c:288 msgid "Abort" msgstr "" #: ../../netconnect.pm_.c:288 #, fuzzy msgid "Continue" msgstr "Continuați totuși?" #: ../../netconnect.pm_.c:294 #, fuzzy msgid "Which is your ISDN card ?" msgstr "Care e zona dumneavoastră orară?" #: ../../netconnect.pm_.c:314 msgid "" "I have detected an ISDN PCI Card, but I don't know the type. Please select " "one PCI card on the next screen." msgstr "" #: ../../netconnect.pm_.c:323 msgid "No ISDN PCI card found. Please select one on the next screen." msgstr "" #: ../../netconnect.pm_.c:371 msgid "" "No ethernet network adapter has been detected on your system.\n" "I cannot set up this connection type." msgstr "" #: ../../netconnect.pm_.c:375 ../../standalone/drakgw_.c:232 #, fuzzy msgid "Choose the network interface" msgstr "Alegeți noua mărime" #: ../../netconnect.pm_.c:376 #, fuzzy msgid "" "Please choose which network adapter you want to use to connect to Internet" msgstr "Pe ce port serie este conectat mouse-ul?" #: ../../netconnect.pm_.c:385 ../../netconnect.pm_.c:700 #: ../../netconnect.pm_.c:845 ../../standalone/drakgw_.c:223 msgid "Network interface" msgstr "" #: ../../netconnect.pm_.c:386 msgid "" "\n" "Do you agree?" msgstr "" #: ../../netconnect.pm_.c:386 #, fuzzy msgid "I'm about to restart the network device:\n" msgstr "Doriți să testați configurația ?" #: ../../netconnect.pm_.c:484 #, fuzzy msgid "ADSL configuration" msgstr "Configurație" #: ../../netconnect.pm_.c:485 #, fuzzy msgid "Do you want to start your connection at boot?" msgstr "Doriti să folosiți aboot?" #: ../../netconnect.pm_.c:620 msgid "Please choose which serial port your modem is connected to." msgstr "Pe ce port serial este conectat modemul dumneavoastră?" #: ../../netconnect.pm_.c:625 msgid "Dialup options" msgstr "Opțuni de telefonie" #: ../../netconnect.pm_.c:626 ../../standalone/draknet_.c:566 msgid "Connection name" msgstr "Nume de conexiune" #: ../../netconnect.pm_.c:627 ../../standalone/draknet_.c:567 #, fuzzy msgid "Phone number" msgstr "Număr de telefon" #: ../../netconnect.pm_.c:628 ../../standalone/draknet_.c:568 msgid "Login ID" msgstr "ID de login" #: ../../netconnect.pm_.c:630 ../../standalone/draknet_.c:570 msgid "Authentication" msgstr "Autentificare" #: ../../netconnect.pm_.c:630 ../../standalone/draknet_.c:570 msgid "PAP" msgstr "PAP" #: ../../netconnect.pm_.c:630 ../../standalone/draknet_.c:570 msgid "Script-based" msgstr "Bazat-pe-un-script" #: ../../netconnect.pm_.c:630 ../../standalone/draknet_.c:570 msgid "Terminal-based" msgstr "Bazat-pe-un-terminal" #: ../../netconnect.pm_.c:631 ../../standalone/draknet_.c:571 #, fuzzy msgid "Domain name" msgstr "Nume de conexiune" #: ../../netconnect.pm_.c:632 ../../standalone/draknet_.c:572 #, fuzzy msgid "First DNS Server (optional)" msgstr "Primul server DNS" #: ../../netconnect.pm_.c:633 ../../standalone/draknet_.c:573 #, fuzzy msgid "Second DNS Server (optional)" msgstr "Al doilea server DNS" #: ../../netconnect.pm_.c:701 msgid "" "I'm about to restart the network device $netc->{NET_DEVICE}. Do you agree?" msgstr "" #: ../../netconnect.pm_.c:745 msgid "" "\n" "You can disconnect or reconfigure your connection." msgstr "" #: ../../netconnect.pm_.c:745 ../../netconnect.pm_.c:748 #, fuzzy msgid "" "\n" "You can reconfigure your connection." msgstr "Configurație rețea" #: ../../netconnect.pm_.c:745 #, fuzzy msgid "You are currently connected to internet." msgstr "Pe ce disc doriți să schimbați ?" #: ../../netconnect.pm_.c:748 #, fuzzy msgid "" "\n" "You can connect to Internet or reconfigure your connection." msgstr "Nume de conexiune" #: ../../netconnect.pm_.c:748 #, fuzzy msgid "You are not currently connected to Internet." msgstr "Pe ce disc doriți să schimbați ?" #: ../../netconnect.pm_.c:752 ../../standalone/net_monitor_.c:81 #, fuzzy msgid "Connect to Internet" msgstr "Nume de conexiune" #: ../../netconnect.pm_.c:754 #, fuzzy msgid "Disconnect from Internet" msgstr "Nume de conexiune" #: ../../netconnect.pm_.c:756 #, fuzzy msgid "Configure network connection (LAN or Internet)" msgstr "Configurație rețea" #: ../../netconnect.pm_.c:759 #, fuzzy msgid "Internet connection & configuration" msgstr "Selectați Conexiunea de imprimantă" #: ../../netconnect.pm_.c:811 ../../netconnect.pm_.c:961 #: ../../netconnect.pm_.c:971 ../../netconnect.pm_.c:986 #, fuzzy msgid "Network Configuration Wizard" msgstr "Configurația rețelei" #: ../../netconnect.pm_.c:812 #, fuzzy msgid "External ISDN modem" msgstr "Expert" #: ../../netconnect.pm_.c:812 msgid "Internal ISDN card" msgstr "" #: ../../netconnect.pm_.c:812 #, fuzzy msgid "What kind is your ISDN connection?" msgstr "La ce port serial este conectat mouse-ul?" #: ../../netconnect.pm_.c:833 ../../netconnect.pm_.c:882 #, fuzzy msgid "Connect to the Internet" msgstr "Nume de conexiune" #: ../../netconnect.pm_.c:834 msgid "" "The most common way to connect with adsl is pppoe.\n" "Some connections use pptp, a few ones use dhcp.\n" "If you don't know, choose 'use pppoe'" msgstr "" #: ../../netconnect.pm_.c:836 msgid "use dhcp" msgstr "" #: ../../netconnect.pm_.c:836 msgid "use pppoe" msgstr "" #: ../../netconnect.pm_.c:836 msgid "use pptp" msgstr "" #: ../../netconnect.pm_.c:846 #, fuzzy, c-format msgid "I'm about to restart the network device %s. Do you agree?" msgstr "Doriți să testați configurația ?" #: ../../netconnect.pm_.c:883 #, fuzzy msgid "" "Which dhcp client do you want to use?\n" "Default is dhcpcd" msgstr "Ce tip de partiție doriți?" #: ../../netconnect.pm_.c:900 #, fuzzy msgid "Network configuration" msgstr "Configurația rețelei" #: ../../netconnect.pm_.c:901 #, fuzzy msgid "Do you want to restart the network" msgstr "Doriți să testați configurația ?" #: ../../netconnect.pm_.c:904 #, fuzzy, c-format msgid "" "A problem occured while restarting the network: \n" "\n" "%s" msgstr "Doriți să testați configurația ?" #: ../../netconnect.pm_.c:935 msgid "" "Because you are doing a network installation, your network is already " "configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your " "Internet & Network connection.\n" msgstr "" #: ../../netconnect.pm_.c:962 msgid "" "Welcome to The Network Configuration Wizard\n" "\n" "We are about to configure your internet/network connection.\n" "If you don't want to use the auto detection, deselect the checkbox.\n" msgstr "" #: ../../netconnect.pm_.c:964 #, fuzzy msgid "Choose the profile to configure" msgstr "Alegeți noua mărime" #: ../../netconnect.pm_.c:965 msgid "Use auto detection" msgstr "" #: ../../netconnect.pm_.c:971 ../../printerdrake.pm_.c:19 msgid "Detecting devices..." msgstr "Detecția perifericelor..." #: ../../netconnect.pm_.c:978 #, fuzzy msgid "Normal modem connection" msgstr "Configurație rețea" #: ../../netconnect.pm_.c:978 #, fuzzy, c-format msgid "detected on port %s" msgstr "Duplicați pounctul de montaj %s" #: ../../netconnect.pm_.c:979 #, fuzzy msgid "ISDN connection" msgstr "Selectați Conexiunea de imprimantă" #: ../../netconnect.pm_.c:979 #, c-format msgid "detected %s" msgstr "" #: ../../netconnect.pm_.c:980 #, fuzzy msgid "DSL (or ADSL) connection" msgstr "Configurație rețea" #: ../../netconnect.pm_.c:980 #, c-format msgid "detected on interface %s" msgstr "" #: ../../netconnect.pm_.c:981 #, fuzzy msgid "Cable connection" msgstr "Selectați Conexiunea de imprimantă" #: ../../netconnect.pm_.c:982 #, fuzzy msgid "LAN connection" msgstr "Selectați Conexiunea de imprimantă" #: ../../netconnect.pm_.c:982 msgid "ethernet card(s) detected" msgstr "" #: ../../netconnect.pm_.c:987 #, fuzzy msgid "How do you want to connect to the Internet?" msgstr "Pe ce disc doriți să schimbați ?" #: ../../netconnect.pm_.c:1004 msgid "" "Congratulation, The network and internet configuration is finished.\n" "\n" "The configuration will now be applied to your system." msgstr "" #: ../../netconnect.pm_.c:1007 msgid "" "After that is done, we recommend you to restart your X\n" "environnement to avoid hostname changing problem." msgstr "" #: ../../network.pm_.c:253 msgid "no network card found" msgstr "n'am găsit nici o carte de rețea" #: ../../network.pm_.c:277 ../../network.pm_.c:387 msgid "Configuring network" msgstr "Configurație rețea" #: ../../network.pm_.c:278 #, fuzzy msgid "" "Please enter your host name if you know it.\n" "Some DHCP servers require the hostname to work.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''." msgstr "" "Vă rog intrați numele calculatorului.\n" "Numele calculatorului ar trebui să fie un nume întreg-calificat,\n" "ca de exemplu ``calculatorulmeu.laboratorulmeu.întreprindereamea.com''.\n" "Puteți de asemenea intra adresa IP a pasarelei dacă aveți una" #: ../../network.pm_.c:282 ../../network.pm_.c:392 #, fuzzy msgid "Host name" msgstr "Numele calculatorului:" #: ../../network.pm_.c:319 msgid "" "WARNING: This device has been previously configured to connect to the " "Internet.\n" "Simply accept to keep this device configured.\n" "Modifying the fields below will override this configuration." msgstr "" #: ../../network.pm_.c:324 msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" "Vă rog intrați configurația IP pentru acest calculator.\n" "Fiecare rubrica va trebui sa fie completată ca o adresă IP în format\n" "zecimal-punctat (de exemplu 192.168.1.55)." #: ../../network.pm_.c:333 ../../network.pm_.c:334 #, c-format msgid "Configuring network device %s" msgstr "Configurația cărții de rețea %s" #: ../../network.pm_.c:334 msgid " (driver $module)" msgstr "" #: ../../network.pm_.c:336 ../../standalone/draknet_.c:231 #: ../../standalone/draknet_.c:427 #, fuzzy msgid "IP address" msgstr "Adresă IP" #: ../../network.pm_.c:337 ../../standalone/draknet_.c:428 #, fuzzy msgid "Netmask" msgstr "Mască de rețea:" #: ../../network.pm_.c:338 msgid "(bootp/dhcp)" msgstr "(bootp/dhcp)" #: ../../network.pm_.c:338 msgid "Automatic IP" msgstr "IP automat" #: ../../network.pm_.c:359 ../../printerdrake.pm_.c:102 #: ../../printerdrake.pm_.c:425 msgid "IP address should be in format 1.2.3.4" msgstr "Adresa IP ar trebui să fie în formatul 1.2.3.4" #: ../../network.pm_.c:388 msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one" msgstr "" "Vă rog intrați numele calculatorului.\n" "Numele calculatorului ar trebui să fie un nume întreg-calificat,\n" "ca de exemplu ``calculatorulmeu.laboratorulmeu.întreprindereamea.com''.\n" "Puteți de asemenea intra adresa IP a pasarelei dacă aveți una" #: ../../network.pm_.c:393 msgid "DNS server" msgstr "Server DNS" #: ../../network.pm_.c:394 ../../standalone/draknet_.c:565 msgid "Gateway" msgstr "Pasarelă" #: ../../network.pm_.c:396 msgid "Gateway device" msgstr "Periferic pasarelă" #: ../../network.pm_.c:407 #, fuzzy msgid "Proxies configuration" msgstr "Configurație post-install" #: ../../network.pm_.c:408 msgid "HTTP proxy" msgstr "HTTP proxy" #: ../../network.pm_.c:409 msgid "FTP proxy" msgstr "FTP proxy" #: ../../network.pm_.c:412 msgid "Proxy should be http://..." msgstr "Proxy-ul ar trebui să fie http://..." #: ../../network.pm_.c:413 msgid "Proxy should be ftp://..." msgstr "Proxy-ul ar trebui să fie ftp://..." #: ../../partition_table.pm_.c:563 msgid "Extended partition not supported on this platform" msgstr "Partițiile extended nu sunt suportatet pe această platformă " #: ../../partition_table.pm_.c:581 msgid "" "You have a hole in your partition table but I can't use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions" msgstr "" "Aveți o gaură în tabloul de partiții dar nu pot să o folosesc.\n" "Singura soluție e să deplasați partiția principală pentru a avea gaura " "lîngăpartiția extinsă" #: ../../partition_table.pm_.c:675 #, c-format msgid "Error reading file %s" msgstr "Eroare la citirea fișierului %s" #: ../../partition_table.pm_.c:682 #, c-format msgid "Restoring from file %s failed: %s" msgstr "Restaurarea din fișierul %s a eșuat: %s" #: ../../partition_table.pm_.c:684 msgid "Bad backup file" msgstr "Backup defectuos" #: ../../partition_table.pm_.c:706 #, c-format msgid "Error writing to file %s" msgstr "Eroare la scrierea în fișierul %s" #: ../../partition_table_raw.pm_.c:161 msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random trash" msgstr "" #: ../../pkgs.pm_.c:24 msgid "must have" msgstr "trebuie avut" #: ../../pkgs.pm_.c:25 msgid "important" msgstr "important" #: ../../pkgs.pm_.c:26 msgid "very nice" msgstr "foarte simpatic" #: ../../pkgs.pm_.c:27 msgid "nice" msgstr "simpatic: " #: ../../pkgs.pm_.c:28 msgid "maybe" msgstr "poate" #: ../../printer.pm_.c:20 msgid "Local printer" msgstr "Imprimantă locală" #: ../../printer.pm_.c:21 #, fuzzy msgid "Remote printer" msgstr "Opțiuni pentru imprimanta lpd distantă" #: ../../printer.pm_.c:23 #, fuzzy msgid "Remote lpd server" msgstr "lpd distant:" #: ../../printer.pm_.c:24 #, fuzzy msgid "Network printer (socket)" msgstr "Opțiunea imprimantei NetWare" #: ../../printer.pm_.c:25 msgid "SMB/Windows 95/98/NT" msgstr "SMB/Windows 95/98/NT" #: ../../printer.pm_.c:26 msgid "NetWare" msgstr "NetWare" #: ../../printer.pm_.c:27 ../../printerdrake.pm_.c:158 #: ../../printerdrake.pm_.c:160 #, fuzzy msgid "Printer Device URI" msgstr "Periferic imprimantă:" #: ../../printerdrake.pm_.c:19 msgid "Test ports" msgstr "Test porturi" #: ../../printerdrake.pm_.c:40 #, c-format msgid "A printer, model \"%s\", has been detected on " msgstr "O imprimantă, modelul \"%s\", a fost detactă în" #: ../../printerdrake.pm_.c:52 msgid "Local Printer Device" msgstr "Periferic local de imprimantă" #: ../../printerdrake.pm_.c:53 msgid "" "What device is your printer connected to \n" "(note that /dev/lp0 is equivalent to LPT1:)?\n" msgstr "" "La ce periferic ați conectat imprimanta \n" "(notați că /dev/lp0 e echivalent cu LPT1:)?\n" #: ../../printerdrake.pm_.c:55 msgid "Printer Device" msgstr "Periferic imprimantă:" #: ../../printerdrake.pm_.c:74 msgid "Remote lpd Printer Options" msgstr "Opțiuni pentru imprimanta lpd distantă" #: ../../printerdrake.pm_.c:75 msgid "" "To use a remote lpd print queue, you need to supply\n" "the hostname of the printer server and the queue name\n" "on that server which jobs should be placed in." msgstr "" "pentru a folosi a coadă de impresie lpd distantă, aveți nevoie să furnizați\n" "numele calculatorului serverului de imprimantă ăi lista de așteptare" #: ../../printerdrake.pm_.c:78 msgid "Remote hostname" msgstr "Numele calculator distant" #: ../../printerdrake.pm_.c:79 msgid "Remote queue" msgstr "Coadă distantă:" #: ../../printerdrake.pm_.c:88 msgid "SMB (Windows 9x/NT) Printer Options" msgstr "Opțiuni pentru imprimanta SMB/Windows 95/NT" #: ../../printerdrake.pm_.c:89 msgid "" "To print to a SMB printer, you need to provide the\n" "SMB host name (Note! It may be different from its\n" "TCP/IP hostname!) and possibly the IP address of the print server, as\n" "well as the share name for the printer you wish to access and any\n" "applicable user name, password, and workgroup information." msgstr "" "Pentru a imprima pe o imprimantă SMB, aveți nevoie să furnizați\n" "numele calculatorului SMB (acesta nu este întotdeauna numele mașinii\n" "TCP/IP) si probabil adresa IP a serverului de imprimantă, cît și \n" "numele de access și numele de utilizator, parola și informația grupului de " "lucru." #: ../../printerdrake.pm_.c:94 msgid "SMB server host" msgstr "Numele serverului SMB" #: ../../printerdrake.pm_.c:95 msgid "SMB server IP" msgstr "Adresa IP a serverului SMB" #: ../../printerdrake.pm_.c:96 msgid "Share name" msgstr "Numele de access" #: ../../printerdrake.pm_.c:99 msgid "Workgroup" msgstr "Numele de grup" #: ../../printerdrake.pm_.c:124 msgid "NetWare Printer Options" msgstr "Opțiunea imprimantei NetWare" #: ../../printerdrake.pm_.c:125 msgid "" "To print to a NetWare printer, you need to provide the\n" "NetWare print server name (Note! it may be different from its\n" "TCP/IP hostname!) as well as the print queue name for the printer you\n" "wish to access and any applicable user name and password." msgstr "" "Pentru a imprima pe o imprimantă NetWare, trebuie să furnizați\n" "numele serverului NetWare (nu e întotdeauna același cu cel TCP/IP)\n" "cît și numele listei de așteptare și eventual utilizatorii care vor avea\n" "access și parolele." #: ../../printerdrake.pm_.c:129 msgid "Printer Server" msgstr "Server de imprimantă" #: ../../printerdrake.pm_.c:130 msgid "Print Queue Name" msgstr "Lista de așteptare a imprimantei" #: ../../printerdrake.pm_.c:142 #, fuzzy msgid "Socket Printer Options" msgstr "Opțiunea imprimantei NetWare" #: ../../printerdrake.pm_.c:143 msgid "" "To print to a socket printer, you need to provide the\n" "hostname of the printer and optionally the port number." msgstr "" #: ../../printerdrake.pm_.c:145 #, fuzzy msgid "Printer Hostname" msgstr "Opțiuni imprimantă" #: ../../printerdrake.pm_.c:146 ../../printerdrake.pm_.c:422 #, fuzzy msgid "Port" msgstr "Slab" #: ../../printerdrake.pm_.c:159 msgid "You can specify directly the URI to access the printer with CUPS." msgstr "" #: ../../printerdrake.pm_.c:192 ../../printerdrake.pm_.c:244 msgid "What type of printer do you have?" msgstr "Ce tip de imprimanta aveți?" #: ../../printerdrake.pm_.c:204 ../../printerdrake.pm_.c:305 msgid "Do you want to test printing?" msgstr "Doriți să testați imprimarea ?" #: ../../printerdrake.pm_.c:207 ../../printerdrake.pm_.c:316 msgid "Printing test page(s)..." msgstr "Imprimarea pagin(ei/lor) de test" #: ../../printerdrake.pm_.c:214 ../../printerdrake.pm_.c:324 #, c-format msgid "" "Test page(s) have been sent to the printer daemon.\n" "This may take a little time before printer start.\n" "Printing status:\n" "%s\n" "\n" "Does it work properly?" msgstr "" "Pagin(a/ile) de test a/au fost trimisă la procesul de impresie.\n" "Aceasta va dura puțin timp înaintea pornirii imprimării\n" "Starea Imprimării:\n" "%s\n" "\n" "Funcționează cum trebuie?" #: ../../printerdrake.pm_.c:218 ../../printerdrake.pm_.c:328 msgid "" "Test page(s) have been sent to the printer daemon.\n" "This may take a little time before printer start.\n" "Does it work properly?" msgstr "" "Pagin(a/ile) de test a/au fost trimisă la procesul de impresie.\n" "Aceasta va dura puțin timp înaintea pornirii imprimării\n" "Funcționează cum trebuie?" #: ../../printerdrake.pm_.c:234 msgid "Yes, print ASCII test page" msgstr "Da, imprimă o pagină de test ASCII" #: ../../printerdrake.pm_.c:235 msgid "Yes, print PostScript test page" msgstr "Da, imprimă o pagina de test Postscript" #: ../../printerdrake.pm_.c:236 msgid "Yes, print both test pages" msgstr "Da, imprimă amîndouă paginile de test" #: ../../printerdrake.pm_.c:243 msgid "Configure Printer" msgstr "Configurația imprimantei" #: ../../printerdrake.pm_.c:273 msgid "Printer options" msgstr "Opțiuni imprimantă" #: ../../printerdrake.pm_.c:274 msgid "Paper Size" msgstr "Mărimea hîrtiei" #: ../../printerdrake.pm_.c:275 msgid "Eject page after job?" msgstr "Ejectarea paginei după lucru?" #: ../../printerdrake.pm_.c:280 msgid "Uniprint driver options" msgstr "Opțiuni pilot Uniprint" #: ../../printerdrake.pm_.c:281 msgid "Color depth options" msgstr "Opțiuni pentru culori:" #: ../../printerdrake.pm_.c:283 msgid "Print text as PostScript?" msgstr "Imprimă text ca Postscript" #: ../../printerdrake.pm_.c:285 msgid "Fix stair-stepping text?" msgstr "Repară efectul de scară al textului" #: ../../printerdrake.pm_.c:287 msgid "Number of pages per output pages" msgstr "Număr de pagini" #: ../../printerdrake.pm_.c:288 msgid "Right/Left margins in points (1/72 of inch)" msgstr "Marginile Dreapta/Stînga în puncte (1/72 inci)" #: ../../printerdrake.pm_.c:289 msgid "Top/Bottom margins in points (1/72 of inch)" msgstr "Marginile Sus/Jos în puncte (1/72 inci)" #: ../../printerdrake.pm_.c:291 msgid "Extra GhostScript options" msgstr "Opțiuni Gostscript suplimentare" #: ../../printerdrake.pm_.c:293 msgid "Extra Text options" msgstr "Opținuni Text suplimentare" #: ../../printerdrake.pm_.c:295 msgid "Reverse page order" msgstr "incersează ordinea paginilor" #: ../../printerdrake.pm_.c:345 msgid "Would you like to configure a printer?" msgstr "Doriți să configurați o imprimantă?" #: ../../printerdrake.pm_.c:351 msgid "" "Here are the following print queues.\n" "You can add some more or change the existing ones." msgstr "" "Iată următoarele cozi de imprimare\n" "Puteți să adăugați altele sau să modificați cele existente." #: ../../printerdrake.pm_.c:370 #, fuzzy msgid "CUPS starting" msgstr "Estimare" #: ../../printerdrake.pm_.c:370 msgid "Reading CUPS drivers database..." msgstr "" #: ../../printerdrake.pm_.c:384 ../../printerdrake.pm_.c:450 #: ../../printerdrake.pm_.c:471 ../../printerdrake.pm_.c:479 msgid "Select Printer Connection" msgstr "Selectați Conexiunea de imprimantă" #: ../../printerdrake.pm_.c:385 ../../printerdrake.pm_.c:472 msgid "How is the printer connected?" msgstr "Cum e conectată imprimanta ?" #: ../../printerdrake.pm_.c:392 #, fuzzy msgid "Select Remote Printer Connection" msgstr "Selectați Conexiunea de imprimantă" #: ../../printerdrake.pm_.c:393 msgid "" "With a remote CUPS server, you do not have to configure\n" "any printer here; printers will be automatically detected.\n" "In case of doubt, select \"Remote CUPS server\"." msgstr "" #: ../../printerdrake.pm_.c:416 msgid "" "With a remote CUPS server, you do not have to configure\n" "any printer here; printers will be automatically detected\n" "unless you have a server on a different network; in the\n" "latter case, you have to give the CUPS server IP address\n" "and optionally the port number." msgstr "" #: ../../printerdrake.pm_.c:421 #, fuzzy msgid "CUPS server IP" msgstr "Adresa IP a serverului SMB" #: ../../printerdrake.pm_.c:429 msgid "Port number should be numeric" msgstr "" #: ../../printerdrake.pm_.c:451 ../../printerdrake.pm_.c:480 msgid "Remove queue" msgstr "Șterge coada" #: ../../printerdrake.pm_.c:454 msgid "" "Name of printer should contains only letters, numbers and the underscore" msgstr "" #: ../../printerdrake.pm_.c:461 #, fuzzy msgid "" "Every printer need a name (for example lp).\n" "Other parameters such as the description of the printer or its location\n" "can be defined. What name should be used for this printer and\n" "how is the printer connected?" msgstr "" "Fiecare coadă (la care activitățile de imprimare sunt trimise) are nevoie\n" "de un nume (adesea lp) și de un directoriu de spool asociat. Ce nume\n" "și directoriu doriți să utilizați pentru această coadă și cum e " "conectatăimprimanta?" #: ../../printerdrake.pm_.c:465 #, fuzzy msgid "Name of printer" msgstr "Imprimantă locală" #: ../../printerdrake.pm_.c:466 #, fuzzy msgid "Description" msgstr "Specificați opțiunile" #: ../../printerdrake.pm_.c:467 #, fuzzy msgid "Location" msgstr "Informație" #: ../../printerdrake.pm_.c:482 msgid "" "Every print queue (which print jobs are directed to) needs a\n" "name (often lp) and a spool directory associated with it. What\n" "name and directory should be used for this queue and how is the printer " "connected?" msgstr "" "Fiecare coadă (la care activitățile de imprimare sunt trimise) are nevoie\n" "de un nume (adesea lp) și de un directoriu de spool asociat. Ce nume\n" "și directoriu doriți să utilizați pentru această coadă și cum e " "conectatăimprimanta?" #: ../../printerdrake.pm_.c:489 msgid "Name of queue" msgstr "Numele cozii:" #: ../../printerdrake.pm_.c:490 msgid "Spool directory" msgstr "Dosar de Spool:" #: ../../printerdrake.pm_.c:491 msgid "Printer Connection" msgstr "Selectați Conexiunea de imprimantă" #: ../../raid.pm_.c:33 #, c-format msgid "Can't add a partition to _formatted_ RAID md%d" msgstr "Nu pot adăuga partiția la md%d _formatat_RAID" #: ../../raid.pm_.c:103 msgid "Can't write file $file" msgstr "Nu pot scrie fișierul $file" #: ../../raid.pm_.c:128 msgid "mkraid failed" msgstr "mkraid a eșuat" #: ../../raid.pm_.c:128 msgid "mkraid failed (maybe raidtools are missing?)" msgstr "mkraid a eșuat (poate vă lipsesc raidtools?)" #: ../../raid.pm_.c:144 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "Nu aveți destule partiții pentru nivelul RAID %d\n" #: ../../services.pm_.c:16 msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "" #: ../../services.pm_.c:17 msgid "Anacron a periodic command scheduler." msgstr "Anacron un orar de comandă periodică" #: ../../services.pm_.c:18 msgid "" "apmd is used for monitoring batery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" "apmd e folosit pentru a monitoriza bateria și login-ul via syslog.\n" "Poate de asemenea fi folosit pentru oprirea calculatorului dacă bateria e\n" "slabă." #: ../../services.pm_.c:20 msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" "Demarează comenzi programate de comanda at la timpul specificat la\n" "demararea lui at și lansează comenzi batch atunci cînd media de încărcare\n" "e suficient de scăzută." #: ../../services.pm_.c:22 msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" "cron e un program UNIX standard care demarează programe-utilizator\n" "specificate la intervale periodice. vixie cron adaugă o serie " "defuncționalități la bazicul cron UNIX, printre care o mai bună securitate " "și\n" "opțiuni de configurație mai avansate." #: ../../services.pm_.c:25 msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" "GPM adaugă suport mouse la aplicații text Linux ca Midnight Commander.\n" "El permite de asemenea operații cu mouse-ul de copiere/lipire și include\n" "suportul meniurilor contextuale în consolă." #: ../../services.pm_.c:28 msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" #: ../../services.pm_.c:30 msgid "" "Apache is a World Wide Web server. It is used to serve HTML files\n" "and CGI." msgstr "" "Apache e un server World Wide Web. E folosit pentru a servi fișiere HTML\n" "și CGI." #: ../../services.pm_.c:32 msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" "Super-procesul Internet (numit în mod normal inetd) demarează o sumedenie\n" "de servicii, incluzînd telnet, ftp, rsh și rlogin. Dezactivarea lui telnet\n" "dezactivează toate serviciile de care e responsabil." #: ../../services.pm_.c:36 msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" #: ../../services.pm_.c:38 msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" "Acest pachet încarcă harta de tastatură selectată ca în\n" "/etc/sysconfig/keyboard. Aceasta poate fi selectată folosind kbdconfig.\n" "Ar trebuie să-l lăsați activat pentru majoritatea calculatoarelor." #: ../../services.pm_.c:41 msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" #: ../../services.pm_.c:43 msgid "Automatic detection and configuration of hardware at boot." msgstr "" #: ../../services.pm_.c:44 msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" #: ../../services.pm_.c:46 msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" "lpd este procesul de imprimare necesar pentru ca lpr să funcționeze corect.\n" "E un server care arbitrează activitatea imprimantei(lor)." #: ../../services.pm_.c:48 msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" #: ../../services.pm_.c:50 msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve\n" "host names to IP addresses." msgstr "" "named (BIND) e un Server de Nume de Domeniu (DNS) care e folosit la\n" "rezolvarea adreselor IP." #: ../../services.pm_.c:52 msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" "Montează și demontează toate punctele de montaj a Fișierelor sistem de " "Rețea\n" "(NFS), SMB (LanManager/Windows și NCP (NetWare)." #: ../../services.pm_.c:54 msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" "Activează/Dezactivează toate interfețele de rețea configurate pentru fi\n" "inițializate la demaraj." #: ../../services.pm_.c:56 msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" "NFS e un protocol popular pentru a împărți fișiere de-a lungul rețelelor\n" "TCP/IP. Acest serviciu furnizează funcționalitatea server-ului NFS, care e\n" "configurată via fișierului /etc/exports." #: ../../services.pm_.c:59 msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" "NFS e un protocol popular pentru a împărți fișiere de-a lungul rețelelor\n" "TCP/IP. Acest serviciu furnizează funcționalitatea blocării fișierelor NFS." #: ../../services.pm_.c:61 msgid "" "Automatically switch on numlock key locker under console\n" "and XFree at boot." msgstr "" #: ../../services.pm_.c:63 msgid "Support the OKI 4w and compatible winprinters." msgstr "" #: ../../services.pm_.c:64 msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It won't get started unless configured so it is safe to " "have\n" "it installed on machines that don't need it." msgstr "" "Suportul PCMCIA e destinat pentru a suporta cartele ethernet și modem-uri\n" "laptop-uri. Nu va demara decît dacă e configurat deci nu e nici o problemă\n" "dacă e instalat pe calculatoare care nu au nevoie de acesta." #: ../../services.pm_.c:67 msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" "Portmapper-ul gestionează conexiunile RPC, care sunt folosite de " "protocoluri\n" "ca NFS și NIS. Server-ul portmap trebuie demarat pe calculatoare care \n" "funcționează ca servere pentru protocoluri care folosesc mecanismul RPC." #: ../../services.pm_.c:70 msgid "" "Postfix is a Mail Transport Agent, which is the program that\n" "moves mail from one machine to another." msgstr "" "Postfix est un Agent de Transport de Mail (MTA), care e programul care\n" "permite deplasarea mail-ului de la un calculator la altul." #: ../../services.pm_.c:72 msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" "Salvează și restaurează entropia sistemului pentru o mai mare calitate\n" "a generării de numere aleatoare." #: ../../services.pm_.c:74 msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle" msgstr "" #: ../../services.pm_.c:76 msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" "Serviciul de rutaj permite actualizarea automată a tabloului IP de rutaj\n" "via\n" " protocolului RIP. În timp de RIP este folosit pentru rețele mici,\n" "alte protocoluri mai complexe sunt folosite pentru rețele mai complexe." #: ../../services.pm_.c:79 msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" "Protocolul rstat permite utilizatorilor unei rețele să recupereze\n" "performanțele metrice de la orice calculator de pe rețea." #: ../../services.pm_.c:81 msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" "'Protocolul rusers permite utilizatorilor unei rețele să identifice\n" "cine e conectat la calculatoarele care au răspuns." #: ../../services.pm_.c:83 msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similiar to finger)." msgstr "" "Protocolul rwho permite utilizatorului să recupereze lista tuturor\n" "utilizatorului conectați la un calculator care folosește procesul rwho\n" "(similar cu finger)." #: ../../services.pm_.c:85 msgid "Launch the sound system on your machine" msgstr "" #: ../../services.pm_.c:86 msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" "Syslog e facilitatea pe care multe procese o folosesc pentru a scrie\n" "mesaje de log în numeroaselor fișiere de log ale sistemului. E o idee\n" "bună să demarați întotdeauna syslog." #: ../../services.pm_.c:88 msgid "Load the drivers for your usb devices." msgstr "" #: ../../services.pm_.c:89 #, fuzzy msgid "Starts the X Font Server (this is mandatory for XFree to run)." msgstr "" "Demarează și oprește Server-ul de caractere X la demararea și\n" "oprirea calculatorului." #: ../../services.pm_.c:118 msgid "Choose which services should be automatically started at boot time" msgstr "Alegeți ce servici doriți să fie lansate automat la demaraj" #: ../../services.pm_.c:137 #, fuzzy msgid "running" msgstr "Avertisment" #: ../../services.pm_.c:137 #, fuzzy msgid "stopped" msgstr "Append" #: ../../services.pm_.c:151 msgid "Services and deamons" msgstr "" #: ../../services.pm_.c:156 msgid "" "No additionnal information\n" "about this service, sorry." msgstr "" #: ../../services.pm_.c:163 #, fuzzy msgid "On boot" msgstr "Root" #: ../../standalone/diskdrake_.c:67 msgid "" "I can't read your partition table, it's too corrupted for me :(\n" "I'll try to go on blanking bad partitions" msgstr "" "Nu pot citi tabloul de partiții, e prea deteriorat după mine :(\n" "Voi încerca să continui ștergînd partițiile greșite" #: ../../standalone/drakgw_.c:37 ../../standalone/drakgw_.c:180 #, fuzzy msgid "Internet Connection Sharing" msgstr "Selectați Conexiunea de imprimantă" #: ../../standalone/drakgw_.c:118 msgid "Internet Connection Sharing currently enabled" msgstr "" #: ../../standalone/drakgw_.c:119 msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" #: ../../standalone/drakgw_.c:123 #, fuzzy msgid "disable" msgstr "Tabel" #: ../../standalone/drakgw_.c:123 ../../standalone/drakgw_.c:148 msgid "dismiss" msgstr "" #: ../../standalone/drakgw_.c:123 ../../standalone/drakgw_.c:148 #, fuzzy msgid "reconfigure" msgstr "Configurați X" #: ../../standalone/drakgw_.c:126 #, fuzzy msgid "Disabling servers..." msgstr "Detecția perifericelor..." #: ../../standalone/drakgw_.c:134 #, fuzzy msgid "Internet connection sharing is now disabled." msgstr "Selectați Conexiunea de imprimantă" #: ../../standalone/drakgw_.c:143 msgid "Internet Connection Sharing currently disabled" msgstr "" #: ../../standalone/drakgw_.c:144 msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" #: ../../standalone/drakgw_.c:148 #, fuzzy msgid "enable" msgstr "Tabel" #: ../../standalone/drakgw_.c:155 msgid "Enabling servers..." msgstr "" #: ../../standalone/drakgw_.c:160 #, fuzzy msgid "Internet connection sharing is now enabled." msgstr "Selectați Conexiunea de imprimantă" #: ../../standalone/drakgw_.c:168 msgid "Config file content could not be interpreted." msgstr "" #: ../../standalone/drakgw_.c:168 msgid "Unrecognized config file" msgstr "" #: ../../standalone/drakgw_.c:181 msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " "this computer's Internet connection.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" #: ../../standalone/drakgw_.c:207 #, c-format msgid "Interface %s (using module %s)" msgstr "" #: ../../standalone/drakgw_.c:208 #, fuzzy, c-format msgid "Interface %s" msgstr "Interesant" #: ../../standalone/drakgw_.c:216 msgid "No network adapter on your system!" msgstr "" #: ../../standalone/drakgw_.c:217 msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "" #: ../../standalone/drakgw_.c:224 #, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" #: ../../standalone/drakgw_.c:233 msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "" #: ../../standalone/drakgw_.c:242 msgid "" "Warning, the network adapter is already configured. I will reconfigure it." msgstr "" #: ../../standalone/drakgw_.c:253 msgid "Potential LAN address conflict found in current config of $_!\n" msgstr "" #: ../../standalone/drakgw_.c:261 ../../standalone/drakgw_.c:267 #, fuzzy msgid "Firewalling configuration detected!" msgstr "Citirea configurației" #: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268 msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fix after installation." msgstr "" #: ../../standalone/drakgw_.c:276 #, fuzzy msgid "Configuring..." msgstr "Configurația IDE" #: ../../standalone/drakgw_.c:277 msgid "Configuring scripts, installing software, starting servers..." msgstr "" #: ../../standalone/drakgw_.c:307 #, fuzzy msgid "Problems installing package $_" msgstr "Instalarea pachetului %s" #: ../../standalone/drakgw_.c:590 msgid "Congratulations!" msgstr "Felicitări!" #: ../../standalone/drakgw_.c:591 msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " "Area Network, using automatic network configuration (DHCP)." msgstr "" #: ../../standalone/drakgw_.c:608 msgid "The setup has already been done, but it's currently disabled." msgstr "" #: ../../standalone/drakgw_.c:609 msgid "The setup has already been done, and it's currently enabled." msgstr "" #: ../../standalone/drakgw_.c:610 #, fuzzy msgid "No Internet Connection Sharing has ever been configured." msgstr "Selectați Conexiunea de imprimantă" #: ../../standalone/drakgw_.c:615 #, fuzzy msgid "Internet connection sharing configuration" msgstr "Selectați Conexiunea de imprimantă" #: ../../standalone/drakgw_.c:622 #, fuzzy, c-format msgid "" "Welcome to the Internet Connection Sharing utility!\n" "\n" "%s\n" "\n" "Click on Configure to launch the setup wizard." msgstr "Selectați Conexiunea de imprimantă" #: ../../standalone/draknet_.c:59 #, fuzzy, c-format msgid "Network configuration (%d adapters)" msgstr "Configurația rețelei" #: ../../standalone/draknet_.c:66 ../../standalone/draknet_.c:539 #, fuzzy msgid "Profile: " msgstr "montare eșuată: " #: ../../standalone/draknet_.c:74 msgid "Del profile..." msgstr "" #: ../../standalone/draknet_.c:80 msgid "Profile to delete:" msgstr "" #: ../../standalone/draknet_.c:108 msgid "New profile..." msgstr "" #: ../../standalone/draknet_.c:114 msgid "Name of the profile to create:" msgstr "" #: ../../standalone/draknet_.c:140 #, fuzzy msgid "Hostname: " msgstr "Numele calculatorului:" #: ../../standalone/draknet_.c:147 #, fuzzy msgid "Internet access" msgstr "Interesant" #: ../../standalone/draknet_.c:160 #, fuzzy msgid "Type:" msgstr "Tip: " #: ../../standalone/draknet_.c:163 ../../standalone/draknet_.c:354 msgid "Gateway:" msgstr "Pasarelă:" #: ../../standalone/draknet_.c:163 ../../standalone/draknet_.c:354 #, fuzzy msgid "Interface:" msgstr "Interesant" #: ../../standalone/draknet_.c:168 msgid "Status:" msgstr "" #: ../../standalone/draknet_.c:170 ../../standalone/draknet_.c:357 #: ../../standalone/net_monitor_.c:122 ../../standalone/net_monitor_.c:224 #, fuzzy msgid "Connected" msgstr "Nume de conexiune" #: ../../standalone/draknet_.c:170 ../../standalone/draknet_.c:357 #: ../../standalone/net_monitor_.c:83 ../../standalone/net_monitor_.c:122 #: ../../standalone/net_monitor_.c:224 #, fuzzy msgid "Not connected" msgstr "Selectați Conexiunea de imprimantă" #: ../../standalone/draknet_.c:173 ../../standalone/draknet_.c:358 msgid "Connect..." msgstr "" #: ../../standalone/draknet_.c:173 ../../standalone/draknet_.c:358 msgid "Disconnect..." msgstr "" #: ../../standalone/draknet_.c:191 #, fuzzy msgid "Starting your connection..." msgstr "Configurație rețea" #: ../../standalone/draknet_.c:199 #, fuzzy msgid "Closing your connection..." msgstr "Configurație rețea" #: ../../standalone/draknet_.c:204 msgid "" "The connection is not closed.\n" "Try to do it manually by running\n" "/etc/sysconfig/network-scripts/net_cnx_down\n" "in root." msgstr "" #: ../../standalone/draknet_.c:207 #, fuzzy msgid "The system is now disconnected." msgstr "Pe ce disc doriți să schimbați ?" #: ../../standalone/draknet_.c:219 #, fuzzy msgid "Configure Internet Access..." msgstr "Configurația serviciilor" #: ../../standalone/draknet_.c:226 ../../standalone/draknet_.c:411 #, fuzzy msgid "LAN configuration" msgstr "Configurație" #: ../../standalone/draknet_.c:231 #, fuzzy msgid "Adapter" msgstr "Actualizare" #: ../../standalone/draknet_.c:231 #, fuzzy msgid "Driver" msgstr "Server" #: ../../standalone/draknet_.c:231 #, fuzzy msgid "Interface" msgstr "Interesant" #: ../../standalone/draknet_.c:231 msgid "Protocol" msgstr "" #: ../../standalone/draknet_.c:250 #, fuzzy msgid "Configure Local Area Network..." msgstr "Configurație rețea" #: ../../standalone/draknet_.c:283 #, fuzzy msgid "Normal Mode" msgstr "Normal" #: ../../standalone/draknet_.c:288 msgid "Apply" msgstr "" #: ../../standalone/draknet_.c:307 #, fuzzy msgid "Please Wait... Applying the configuration" msgstr "Test de configurație" #: ../../standalone/draknet_.c:391 msgid "" "You don't have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" #: ../../standalone/draknet_.c:415 #, fuzzy msgid "LAN Configuration" msgstr "Configurație" #: ../../standalone/draknet_.c:423 #, c-format msgid "Adapter %s: %s" msgstr "" #: ../../standalone/draknet_.c:429 msgid "Boot Protocol" msgstr "" #: ../../standalone/draknet_.c:430 msgid "Started on boot" msgstr "" #: ../../standalone/draknet_.c:431 msgid "DHCP client" msgstr "" #: ../../standalone/draknet_.c:466 ../../standalone/draknet_.c:470 #, fuzzy msgid "Disable" msgstr "Tabel" #: ../../standalone/draknet_.c:466 ../../standalone/draknet_.c:470 #, fuzzy msgid "Enable" msgstr "Tabel" #: ../../standalone/draknet_.c:504 msgid "" "You don't have any internet connection.\n" "Create one first by clicking on 'Configure'" msgstr "" #: ../../standalone/draknet_.c:528 #, fuzzy msgid "Internet connection configuration" msgstr "Selectați Conexiunea de imprimantă" #: ../../standalone/draknet_.c:532 #, fuzzy msgid "Internet Connection Configuration" msgstr "Selectați Conexiunea de imprimantă" #: ../../standalone/draknet_.c:541 #, fuzzy msgid "Connection type: " msgstr "Nume de conexiune" #: ../../standalone/draknet_.c:547 msgid "Parameters" msgstr "" #: ../../standalone/draknet_.c:560 #, fuzzy msgid "Provider dns 1 (optional)" msgstr "Opțiuni imprimantă" #: ../../standalone/draknet_.c:561 #, fuzzy msgid "Provider dns 2 (optional)" msgstr "Opțiuni imprimantă" #: ../../standalone/draknet_.c:574 msgid "Ethernet Card" msgstr "" #: ../../standalone/draknet_.c:575 msgid "DHCP Client" msgstr "" #: ../../standalone/draksec_.c:21 msgid "Welcome To Crackers" msgstr "Bun venit Piraților" #: ../../standalone/draksec_.c:22 msgid "Poor" msgstr "Slab" #: ../../standalone/draksec_.c:26 msgid "Paranoid" msgstr "Paranoiac" #: ../../standalone/draksec_.c:29 msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive: it must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" "Va trebui să folosiți acest nivel cu grijă. Aceasta face ca sistemul să fie\n" "mai ușor de folosit, dar foarte sensibil: nu trebuie să fie folosit pentru " "un\n" "calculator conectat cu altele de pe Internet. Nu există nici o parolă de\n" "acces." #: ../../standalone/draksec_.c:32 msgid "" "Password are now enabled, but use as a networked computer is still not " "recommended." msgstr "" "Parolele sunt acum activate, dar utilizarea lui ca un calculator într-o\n" "rețea tot nu recomandată." #: ../../standalone/draksec_.c:33 msgid "" "Few improvements for this security level, the main one is that there are\n" "more security warnings and checks." msgstr "" "Cîteva ameliorări pentru acest nivel de securitate, principalul fiind că\n" "am introdus mai multe mesaje de avertisment și verificări." #: ../../standalone/draksec_.c:35 msgid "" "This is the standard security recommended for a computer that will be used\n" "to connect to the Internet as a client. There are now security checks. " msgstr "" "Acest a nivelul de securitate standard recomandat pentru un calculator care\n" "va fi conectat ca un client la Internet. Nu există verificări de securitate." #: ../../standalone/draksec_.c:37 msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which accept\n" "connections from many clients. " msgstr "" "Cu acest nivel de securitate, utilizarea acestui calculator ca server\n" "devine posibilă. Securitatea este destul de ridicată pentru a folosi acest\n" "sistem ca server care acceptă conexiuni de la mulți clienți." #: ../../standalone/draksec_.c:40 msgid "" "We take level 4 features, but now the system is entirely closed.\n" "Security features are at their maximum." msgstr "" "Avem funcționalitățile nivelului 4 de securitate dar acum sistemul e\n" "complet închis. Securitatea e la maximum." #: ../../standalone/draksec_.c:52 msgid "Setting security level" msgstr "Alegerea nivelului de securitate" #: ../../standalone/drakxconf_.c:44 #, fuzzy msgid "Control Center" msgstr "Nume de conexiune" #: ../../standalone/drakxconf_.c:45 msgid "Choose the tool you want to use" msgstr "Alegeți unealta pe care doriți să o folosiți" #: ../../standalone/keyboarddrake_.c:16 msgid "usage: keyboarddrake [--expert] [keyboard]\n" msgstr "" #: ../../standalone/keyboarddrake_.c:36 msgid "Do you want the BackSpace to return Delete in console?" msgstr "" #: ../../standalone/livedrake_.c:23 #, fuzzy msgid "Change Cd-Rom" msgstr "Alegeți o altă rezoluție" #: ../../standalone/livedrake_.c:24 #, fuzzy msgid "" "Please insert the Installation Cd-Rom in your drive and press Ok when done.\n" "If you don't have it, press Cancel to avoid live upgrade." msgstr "" "Schimbați Cd-Rom-ul!\n" "\n" "Vă rog introduceți Cd-Rom etichetat \"%s\" și apoi apăsați Ok.\n" "Dacă nu-l aveți, apăsați Anulează pentru a evita instalarea de pe acest Cd-" "Rom." #: ../../standalone/livedrake_.c:34 msgid "Unable to start live upgrade !!!\n" msgstr "" #: ../../standalone/mousedrake_.c:50 msgid "no serial_usb found\n" msgstr "n'am găsit nici un serie_usb\n" #: ../../standalone/mousedrake_.c:54 msgid "Emulate third button?" msgstr "Emulare 3 Butoane?" #: ../../standalone/mousedrake_.c:131 #, fuzzy msgid "Test the mouse here." msgstr "Vă rog, alegeți tipul de mouse?" #: ../../standalone/net_monitor_.c:40 ../../standalone/net_monitor_.c:52 #, fuzzy msgid "Network Monitoring" msgstr "Configurația rețelei" #: ../../standalone/net_monitor_.c:56 msgid "Statistics" msgstr "" #: ../../standalone/net_monitor_.c:59 msgid "Sending Speed: " msgstr "" #: ../../standalone/net_monitor_.c:61 msgid "Receiving Speed: " msgstr "" #: ../../standalone/net_monitor_.c:66 #, fuzzy msgid "Close" msgstr "Mouse USB" #: ../../standalone/net_monitor_.c:100 ../../standalone/net_monitor_.c:104 #, fuzzy msgid "Connecting to Internet " msgstr "Nume de conexiune" #: ../../standalone/net_monitor_.c:100 ../../standalone/net_monitor_.c:104 #, fuzzy msgid "Disconnecting from Internet " msgstr "Nume de conexiune" #: ../../standalone/net_monitor_.c:114 #, fuzzy msgid "Disconnection from Internet failed." msgstr "Nume de conexiune" #: ../../standalone/net_monitor_.c:115 #, fuzzy msgid "Disconnection from Internet complete." msgstr "Nume de conexiune" #: ../../standalone/net_monitor_.c:117 #, fuzzy msgid "Connection complete." msgstr "Nume de conexiune" #: ../../standalone/net_monitor_.c:118 msgid "" "Connection failed.\n" "Verify your configuration in the Mandrake Control Center." msgstr "" #: ../../standalone/net_monitor_.c:188 msgid "sent: " msgstr "" #: ../../standalone/net_monitor_.c:191 msgid "received: " msgstr "" #: ../../standalone/net_monitor_.c:222 #, fuzzy msgid "Connect" msgstr "Nume de conexiune" #: ../../standalone/net_monitor_.c:222 #, fuzzy msgid "Disconnect" msgstr "Selectați Conexiunea de imprimantă" #: ../../standalone/tinyfirewall_.c:29 #, fuzzy msgid "Firewalling Configuration" msgstr "Citirea configurației" #: ../../standalone/tinyfirewall_.c:42 #, fuzzy msgid "Firewalling configuration" msgstr "Citirea configurației" #: ../../standalone/tinyfirewall_.c:77 msgid "" "Firewalling\n" "\n" "You already have set up a firewall.\n" "Click on Configure to change or remove the firewall" msgstr "" #: ../../standalone/tinyfirewall_.c:81 msgid "" "Firewalling\n" "\n" "Click on Configure to set up a standard firewall" msgstr "" #: ../../tinyfirewall.pm_.c:10 msgid "" "tinyfirewall configurator\n" "\n" "This configures a personal firewall for this Linux Mandrake machine.\n" "For a powerful dedicated firewall solution, please look to the\n" "specialized MandrakeSecurity Firewall distribution." msgstr "" #: ../../tinyfirewall.pm_.c:15 msgid "" "We'll now ask you questions about which services you'd like to allow\n" "the Internet to connect to. Please think carefully about these\n" "questions, as your computer's security is important.\n" "\n" "Please, if you're not currently using one of these services, firewall\n" "it off. You can change this configuration anytime you like by\n" "re-running this application!" msgstr "" #: ../../tinyfirewall.pm_.c:22 msgid "" "Are you running a web server on this machine that you need the whole\n" "Internet to see? If you are running a webserver that only needs to be\n" "accessed by this machine, you can safely answer NO here.\n" "\n" msgstr "" #: ../../tinyfirewall.pm_.c:27 msgid "" "Are you running a name server on this machine? If you didn't set one\n" "up to give away IP and zone information to the whole Internet, please\n" "answer no.\n" "\n" msgstr "" #: ../../tinyfirewall.pm_.c:32 msgid "" "Do you want to allow incoming Secure Shell (ssh) connections? This\n" "is a telnet-replacement that you might use to login. If you're using\n" "telnet now, you should definitely switch to ssh. telnet is not\n" "encrypted -- so some attackers can steal your password if you use\n" "it. ssh is encrypted and doesn't allow for this eavesdropping." msgstr "" #: ../../tinyfirewall.pm_.c:37 msgid "" "Do you want to allow incoming telnet connections?\n" "This is horribly unsafe, as we explained in the previous screen. We\n" "strongly recommend answering No here and using ssh in place of\n" "telnet.\n" msgstr "" #: ../../tinyfirewall.pm_.c:42 msgid "" "Are you running an FTP server here that you need accessible to the\n" "Internet? If you are, we strongly recommend that you only use it for\n" "Anonymous transfers. Any passwords sent by FTP can be stolen by some\n" "attackers, since FTP also uses no encryption for transferring passwords.\n" msgstr "" #: ../../tinyfirewall.pm_.c:47 msgid "" "Are you running a mail server here? If you're sending you \n" "messages through pine, mutt or any other text-based mail client,\n" "you probably are. Otherwise, you should firewall this off.\n" "\n" msgstr "" #: ../../tinyfirewall.pm_.c:52 msgid "" "Are you running a POP or IMAP server here? This would\n" "be used to host non-web-based mail accounts for people via \n" "this machine.\n" "\n" msgstr "" #: ../../tinyfirewall.pm_.c:57 msgid "" "You appear to be running a 2.2 kernel. If your network IP\n" "is automatically set by a computer in your home or office \n" "(dynamically assigned), we need to allow for this. Is\n" "this the case?\n" msgstr "" #: ../../tinyfirewall.pm_.c:62 msgid "" "Is your computer getting time syncronized to another computer?\n" "Mostly, this is used by medium-large Unix/Linux organizations\n" "to synchronize time for logging and such. If you're not part\n" "of a larger office and haven't heard of this, you probably \n" "aren't." msgstr "" #: ../../tinyfirewall.pm_.c:67 msgid "" "Configuration complete. May we write these changes to disk?\n" "\n" "\n" "\n" msgstr "" #: ../../tinyfirewall.pm_.c:83 #, c-format msgid "Can't open %s: %s\n" msgstr "" #: ../../tinyfirewall.pm_.c:85 #, fuzzy, c-format msgid "Can't open %s for writing: %s\n" msgstr "Eroare la citirea %s pentru a scrie: %s" #: ../../share/compssUsers:999 msgid "Clients for different protocols including ssh" msgstr "" #: ../../share/compssUsers:999 #, fuzzy msgid "Development" msgstr "Programator" #: ../../share/compssUsers:999 #, fuzzy msgid "Workstation" msgstr "Informație" #: ../../share/compssUsers:999 msgid "Firewall/Router" msgstr "" #: ../../share/compssUsers:999 msgid "Personal Information Management" msgstr "" #: ../../share/compssUsers:999 #, fuzzy msgid "Multimedia - Graphics" msgstr "Multimedia" #: ../../share/compssUsers:999 #, fuzzy msgid "Internet" msgstr "Interesant" #: ../../share/compssUsers:999 #, fuzzy msgid "Network Computer (client)" msgstr "Opțiunea imprimantei NetWare" #: ../../share/compssUsers:999 msgid "Audio-related tools: mp3 or midi players, mixers, etc" msgstr "" #: ../../share/compssUsers:999 #, fuzzy msgid "Internet station" msgstr "Configurație proxy" #: ../../share/compssUsers:999 msgid "Office" msgstr "Birou" #: ../../share/compssUsers:999 #, fuzzy msgid "Multimedia station" msgstr "Multimedia" #: ../../share/compssUsers:999 msgid "" "Set of tools to read and send mail and news (pine, mutt, tin..) and to " "browse the Web" msgstr "" #: ../../share/compssUsers:999 msgid "C and C++ development libraries, programs and include files" msgstr "" #: ../../share/compssUsers:999 msgid "Domain Name and Network Information Server" msgstr "" #: ../../share/compssUsers:999 msgid "Programs to manage your finance, such as gnucash" msgstr "" #: ../../share/compssUsers:999 msgid "PostgreSQL or MySQL database server" msgstr "" #: ../../share/compssUsers:999 msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "" #: ../../share/compssUsers:999 msgid "Documentation" msgstr "Documentație" #: ../../share/compssUsers:999 msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "" #: ../../share/compssUsers:999 msgid "Utilities" msgstr "" #: ../../share/compssUsers:999 msgid "DNS/NIS " msgstr "" #: ../../share/compssUsers:999 msgid "Graphical Environment" msgstr "" #: ../../share/compssUsers:999 #, fuzzy msgid "Multimedia - Sound" msgstr "Multimedia" #: ../../share/compssUsers:999 msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "" #: ../../share/compssUsers:999 msgid "Video players and editors" msgstr "" #: ../../share/compssUsers:999 msgid "Console Tools" msgstr "" #: ../../share/compssUsers:999 msgid "Sound and video playing/editing programs" msgstr "" #: ../../share/compssUsers:999 #, fuzzy msgid "Scientific Workstation" msgstr "Informație" #: ../../share/compssUsers:999 msgid "Editors, shells, file tools, terminals" msgstr "" #: ../../share/compssUsers:999 msgid "Books and Howto's on Linux and Free Software" msgstr "" #: ../../share/compssUsers:999 msgid "" "A graphical environment with user-friendly set of applications and desktop " "tools" msgstr "" #: ../../share/compssUsers:999 msgid "Postfix mail server, Inn news server" msgstr "" #: ../../share/compssUsers:999 #, fuzzy msgid "Games" msgstr "Gnome" #: ../../share/compssUsers:999 #, fuzzy msgid "Multimedia - Video" msgstr "Multimedia" #: ../../share/compssUsers:999 #, fuzzy msgid "Network Computer server" msgstr "Opțiunea imprimantei NetWare" #: ../../share/compssUsers:999 msgid "Graphics programs such as The Gimp" msgstr "" #: ../../share/compssUsers:999 #, fuzzy msgid "Office Workstation" msgstr "Informație" #: ../../share/compssUsers:999 msgid "" "The K Desktop Environment, the basic graphical environment with a collection " "of accompanying tools" msgstr "" #: ../../share/compssUsers:999 msgid "More Graphical Desktops (Gnome, IceWM)" msgstr "" #: ../../share/compssUsers:999 msgid "Tools to create and burn CD's" msgstr "" #: ../../share/compssUsers:999 #, fuzzy msgid "Multimedia - CD Burning" msgstr "Multimedia" #: ../../share/compssUsers:999 msgid "Archiving, emulators, monitoring" msgstr "" #: ../../share/compssUsers:999 msgid "Database" msgstr "" #: ../../share/compssUsers:999 msgid "" "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " "gnumeric), pdf viewers, etc" msgstr "" #: ../../share/compssUsers:999 msgid "Web/FTP" msgstr "" #: ../../share/compssUsers:999 #, fuzzy msgid "Server" msgstr "server" #: ../../share/compssUsers:999 msgid "Personal Finance" msgstr "" #: ../../share/compssUsers:999 msgid "Configuration" msgstr "Configurație" #: ../../share/compssUsers:999 #, fuzzy msgid "KDE Workstation" msgstr "Informație" #: ../../share/compssUsers:999 msgid "Other Graphical Desktops" msgstr "" #: ../../share/compssUsers:999 msgid "Apache, Pro-ftpd" msgstr "" #: ../../share/compssUsers:999 msgid "Mail/Groupware/News" msgstr "" #: ../../share/compssUsers:999 #, fuzzy msgid "Gnome Workstation" msgstr "Informație" #: ../../share/compssUsers:999 #, fuzzy msgid "Internet gateway" msgstr "Interesant" #: ../../share/compssUsers:999 msgid "Tools for your Palm Pilot or your Visor" msgstr "" #: ../../share/compssUsers:999 #, fuzzy msgid "Game station" msgstr "Documentație" #: ../../share/compssUsers:999 msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "" #: ../../share/compssUsers:999 #, fuzzy msgid "Tools to ease the configuration of your computer" msgstr "Doriți să testați configurația ?" #: ../../share/compssUsers:999 msgid "Set of tools for mail, news, web, file transfer, and chat" msgstr "" #, fuzzy #~ msgid "%d seconds" #~ msgstr "Testul se va termina în %d secunde" #, fuzzy #~ msgid "Lilo/Grub configuration" #~ msgstr "Configurație" #, fuzzy #~ msgid "Selected size %d%s" #~ msgstr "Selecționează fișierul" #, fuzzy #~ msgid "Opening your connection..." #~ msgstr "Configurație rețea" #, fuzzy #~ msgid "Configure..." #~ msgstr "Configurația IDE" #, fuzzy #~ msgid "Standard tools" #~ msgstr "Programator" #, fuzzy #~ msgid "Configuration de Lilo/Grub" #~ msgstr "Configurație: Adaugă localizare" #~ msgid "This startup script try to load your modules for your usb mouse." #~ msgstr "" #~ "Acest script de demaraj încearcă să încarce modulele pentru mouse-ul\n" #~ "dumneavoastră usb." #, fuzzy #~ msgid "Boot style configuration" #~ msgstr "Configurație post-install" #~ msgid "Automatic dependencies" #~ msgstr "Dependențe automate" #~ msgid "Configure LILO/GRUB" #~ msgstr "Configurație LILO/GRUB" #~ msgid "Create a boot floppy" #~ msgstr "Creați o dischetă de demaraj" #~ msgid "Format floppy" #~ msgstr "Formatează dischetă" #~ msgid "Choice" #~ msgstr "Alegere " #, fuzzy #~ msgid "gMonitor" #~ msgstr "Monitor" #, fuzzy #~ msgid "" #~ "You can now select some miscellaneous options for your system.\n" #~ "\n" #~ "* Use hard drive optimizations: this option can improve hard disk " #~ "performance but is only for advanced users. Some buggy\n" #~ " chipsets can ruin your data, so beware. Note that the kernel has a " #~ "builtin blacklist of drives and chipsets, but if\n" #~ " you want to avoid bad surprises, leave this option unset.\n" #~ "\n" #~ "\n" #~ "* Choose security level: you can choose a security level for your system. " #~ "Please refer to the manual for complete\n" #~ " information. Basically, if you don't know what to choose, keep the " #~ "default option.\n" #~ "\n" #~ "\n" #~ "* Precise RAM if needed: unfortunately, there is no standard method to " #~ "ask the BIOS about the amount of RAM present in\n" #~ " your computer. As consequence, Linux may fail to detect your amount of " #~ "RAM correctly. If this is the case, you can\n" #~ " specify the correct amount or RAM here. Please note that a difference " #~ "of 2 or 4 MB between detected memory and memory\n" #~ " present in your system is normal.\n" #~ "\n" #~ "\n" #~ "* Removable media automounting: if you would prefer not to manually mount " #~ "removable media (CD-Rom, floppy, Zip, etc.) by\n" #~ " typing \"mount\" and \"umount\", select this option.\n" #~ "\n" #~ "\n" #~ "* Clean \"/tmp\" at each boot: if you want delete all files and " #~ "directories stored in \"/tmp\" when you boot your system,\n" #~ " select this option.\n" #~ "\n" #~ "\n" #~ "* Enable num lock at startup: if you want NumLock key enabled after " #~ "booting, select this option. Please note that you\n" #~ " should not enable this option on laptops and that NumLock may or may " #~ "not work under X." #~ msgstr "" #~ "Puteți alege acum diferite opțiuni pentru sistemul dumneavoastră.\n" #~ "\n" #~ " - Folosește optimizări pentru disc dur: această opțiune poate ameliora\n" #~ "performanțele discului dur dar e rezervat numai utilizatorilor avansați:\n" #~ "problemele cu unele microprocesoare port distruge datele, deci sunteți\n" #~ "avertizat. Kernel-ul conține o listă neagră a discurilor și a " #~ "microproce-\n" #~ "soarelor, dar dacă vreți să eliminați orice surpriză nu selectați " #~ "această\n" #~ "opțiune.\n" #~ "\n" #~ " - Alege nivelul de securitate: puteți alege nivelul de securitate " #~ "pentru\n" #~ "sistemul dumneavoastră. Vă referiți-vă la manual pentru o informație " #~ "completă.\n" #~ "Pe scurt: dacă nu sunteți sigur, alegeți \"Mediu\", dacă doriți un\n" #~ "calculator securizat, alegeți \"Paranoiac\" dar aveți grijă: ÎN ACEST " #~ "NIVEL\n" #~ " DE SECURITATE, LE LOGIN ÎN CALITATE DE ROOT NU E AUTORIZAT DIRECT! " #~ "Pentru \n" #~ "a deveni root, va trebui să vă conectați ca utilizator normal și apoi să\n" #~ "folosiți comanda \"su\". În plus, nu vă așteptați să aveți altceva decît\n" #~ "un server. Ați fost avertizat.\n" #~ "\n" #~ " - Precizează RAM-ul dacă e necesar: din păcate, în lumea actuală a\n" #~ "calculatoarelor personale, nu există o metodă standard pentru a consulta\n" #~ "BIOS-ul cu privire la RAM-ul prezent în calculator dumneavoastră. Din\n" #~ "această cauză, Linux poate eșua la detectarea RAM-ului în mod corect. " #~ "Dacă\n" #~ "acesta e cazul, puteți specifica aici cantitatea exactă. Notați că o\n" #~ "diferență de 2 sau 4Mb e normală.\n" #~ "\n" #~ " - Auto-montaj des media extractibile: dacă preferați să nu montați " #~ "manual\n" #~ "în mod manual aceste periferice (CD-ROM, Floppy, Zip) cu ajutorul \n" #~ "comenzilor \"mount\" și \"umount\", selectați această opțiune.\n" #~ "\n" #~ " - Activează Numlock la demaraj: dacă doriți să activați NumLock la\n" #~ "demaraj selectați această opțiune (Notați că Numlock poate sau să\n" #~ "funcționeze în) mod grafic, X)." #, fuzzy #~ msgid "Internet/Network access" #~ msgstr "Interesant" #, fuzzy #~ msgid "Mail information" #~ msgstr "Afișează informațiile" #, fuzzy #~ msgid "Firewall Configuration Wizard" #~ msgstr "Configurația rețelei" #~ msgid "Miscellaneous" #~ msgstr "Diverse" #~ msgid "Miscellaneous questions" #~ msgstr "Întrebări diverse" #~ msgid "Can't use supermount in high security level" #~ msgstr "Nu pot să folosesc supermount în nivelul de securitate ridicat" #, fuzzy #~ msgid "Actions" #~ msgstr "Informație" #, fuzzy #~ msgid "toot" #~ msgstr "Root" #~ msgid "First DNS Server" #~ msgstr "Primul server DNS" #~ msgid "Second DNS Server" #~ msgstr "Al doilea server DNS" #, fuzzy #~ msgid "using module" #~ msgstr "Nume de domeniu" #, fuzzy #~ msgid "Development, Database" #~ msgstr "Programator" #~ msgid "loopback" #~ msgstr "loopback" #~ msgid "None" #~ msgstr "Nici unul" #~ msgid "Which bootloader(s) do you want to use?" #~ msgstr "Ce gestionar de demaraj doriți să folosiți ?" #~ msgid "Auto install floppy" #~ msgstr "Floppy pentru instalare automată" #~ msgid "Try to find a modem?" #~ msgstr "Să caut un modem?" #, fuzzy #~ msgid "Configure an ISDN connection" #~ msgstr "Configurație rețea" #, fuzzy #~ msgid "Configure a cable connection" #~ msgstr "Configurație rețea" #, fuzzy #~ msgid "Disable Internet Connection" #~ msgstr "Configurație rețea" #, fuzzy #~ msgid "Configure local network" #~ msgstr "Configurație rețea" #, fuzzy #~ msgid "Disable networking" #~ msgstr "Configurație rețea" #, fuzzy #~ msgid "Configure the Internet connection / Configure local Network" #~ msgstr "Nume de conexiune" #, fuzzy #~ msgid "" #~ "Local networking has already been configured.\n" #~ "Do you want to:" #~ msgstr "Rețeaua LAN a fost deja configurată. Doriți să :" #, fuzzy #~ msgid "Reconfigure using wizard..." #~ msgstr "Configurația IDE" #~ msgid "Multimedia" #~ msgstr "Multimedia" #, fuzzy #~ msgid "KDE" #~ msgstr "IDE" #~ msgid "Gnome" #~ msgstr "Gnome" #, fuzzy #~ msgid "Internet Tools" #~ msgstr "Configurație proxy" #, fuzzy #~ msgid "Development C/C++" #~ msgstr "Programator" #~ msgid "Configure timezone" #~ msgstr "Configurația zonei orare" #~ msgid "Configure printer" #~ msgstr "Configurația imprimantei" #, fuzzy #~ msgid "Network adaptater 1 (eth0):" #~ msgstr "Opțiunea imprimantei NetWare" #~ msgid "(may cause data corruption)" #~ msgstr "(poate cauza deteriorarea datelor)" #~ msgid "Use hard drive optimisations?" #~ msgstr "Sa folosesc optimizările penrtu disc dur?" #~ msgid "Enable num lock at startup" #~ msgstr "Activează num lock la demaraj" #, fuzzy #~ msgid "Confirm Password" #~ msgstr "Parola" #~ msgid "DNS server:" #~ msgstr "Server DNS:" #~ msgid "Gateway device:" #~ msgstr "Periferic pasarelă:" #~ msgid "default" #~ msgstr "standard" #, fuzzy #~ msgid "What is your system used for?" #~ msgstr "Care e folosința sistemului dumneavoastră?" #, fuzzy #~ msgid "Select the size you want to install" #~ msgstr "Alegeți mărimea pe care vreți să o instalați" #~ msgid "Customized" #~ msgstr "Personalizat" #, fuzzy #~ msgid "" #~ "Are you sure you are an expert? \n" #~ "You will be allowed to make powerful but dangerous things here.\n" #~ "\n" #~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n" #~ "are you ready to answer that kind of questions?" #~ msgstr "" #~ "Sunteți sigur ca sunteți un expert?\n" #~ "Ei, nu-i glumă, veți putea face lucruri serioase dar periculoase aici." #~ msgid "Use shadow file" #~ msgstr "Folosește un fișier shadow" #~ msgid "shadow" #~ msgstr "shadow" #~ msgid "MD5" #~ msgstr "MD5" #~ msgid "Use MD5 passwords" #~ msgstr "Folosește parole MD5" #~ msgid "Search" #~ msgstr "Caută" #~ msgid "Package" #~ msgstr "Pachet" #~ msgid "Text" #~ msgstr "Text" #~ msgid "Tree" #~ msgstr "Arbore" #~ msgid "Sort by" #~ msgstr "Triază în funcție de" #~ msgid "Category" #~ msgstr "Categorie" #~ msgid "See" #~ msgstr "Afișează" #~ msgid "Installed packages" #~ msgstr "Pachete instalate" #~ msgid "Available packages" #~ msgstr "Pachete disponibile" #~ msgid "Show only leaves" #~ msgstr "Afișați numai foile" #~ msgid "Expand all" #~ msgstr "Expandează tot" #~ msgid "Collapse all" #~ msgstr "Reduce tot" #~ msgid "Add location of packages" #~ msgstr "Adaugă localizarea pachetelor" #~ msgid "Update location" #~ msgstr "Actualizare localizare" #~ msgid "Remove" #~ msgstr "Șterge" #~ msgid "Find Package" #~ msgstr "Caută Pachetul" #~ msgid "Find Package containing file" #~ msgstr "Caută pachetul conținînd fișierul" #~ msgid "Toggle between Installed and Available" #~ msgstr "Basculează între Instalare și Disponibil" #~ msgid "Uninstall" #~ msgstr "Dezinstalare" #~ msgid "Choose package to install" #~ msgstr "Alegeți pachetul de instalat" #~ msgid "Checking dependencies" #~ msgstr "Verificare dependențe" #~ msgid "Wait" #~ msgstr "Așteptare" #~ msgid "The following packages are going to be uninstalled" #~ msgstr "Pachetele următoare urmează să fie dezinstalate" #~ msgid "Uninstalling the RPMs" #~ msgstr "Dezinstalarea RPM-urilor" #~ msgid "Regexp" #~ msgstr "Regexp" #~ msgid "Which package are looking for" #~ msgstr "Ce pachet căutați ?" #~ msgid "%s not found" #~ msgstr "n'am găsit %s " #~ msgid "No match" #~ msgstr "Nici unul" #~ msgid "No more match" #~ msgstr "Nici o altă ocurență" #~ msgid "" #~ "rpmdrake is currently in ``low memory'' mode.\n" #~ "I'm going to relaunch rpmdrake to allow searching files" #~ msgstr "" #~ "rpmdrake e actualmente într-un mod ``memorie joasă''.\n" #~ "Voi re-lansa rpmdrake pentru a permite căutarea fișierelor" #~ msgid "Which file are you looking for?" #~ msgstr "Ce fișier căutați ?" #~ msgid "What are looking for?" #~ msgstr "Ce căutați ?" #~ msgid "Give a name (eg: `extra', `commercial')" #~ msgstr "Dați-mi un nume (ex: `extra', `comercial')" #~ msgid "Directory" #~ msgstr "Directoriu" #~ msgid "No cdrom available (nothing in /mnt/cdrom)" #~ msgstr "Nici un Cd-rom disponibil (nimic în /mnt/cdrom)" #~ msgid "URL of the directory containing the RPMs" #~ msgstr "URL-ul directoriului care conține RPM-urile" #~ msgid "" #~ "For FTP and HTTP, you need to give the location for hdlist\n" #~ "It must be relative to the URL above" #~ msgstr "" #~ "Pentru FTP și HTTP, aveți nevoie să dați localizarea pentru hdlist\n" #~ "Aceasta trebuie să fie relativă la URL -ul de mai sus" #~ msgid "Please submit the following information" #~ msgstr "Vă rog furnizați următoarea informație" #~ msgid "%s is already in use" #~ msgstr "%s e deja folosit" #~ msgid "Updating the RPMs base" #~ msgstr "Actualizare bazei RPM-urilor" #~ msgid "Going to remove entry %s" #~ msgstr "Voi șterge intrarea %s" #~ msgid "Finding leaves" #~ msgstr "Căutare de foi" #~ msgid "Finding leaves takes some time" #~ msgstr "Găsirea foilor ia ceva timp" #, fuzzy #~ msgid "France" #~ msgstr "Anulează" #, fuzzy #~ msgid "ECI modem" #~ msgstr "Expert" #~ msgid "mandatory" #~ msgstr "indispensabil" #~ msgid "interesting" #~ msgstr "Interesant" #~ msgid "i18n (important)" #~ msgstr "i18n (important)" #~ msgid "i18n (very nice)" #~ msgstr "i18n (foarte simpatic)" #~ msgid "i18n (nice)" #~ msgstr "i18n (simpatic)" #~ msgid "Which serial port is your mouse connected to?" #~ msgstr "La ce port serial este conectat mouse-ul?" #~ msgid "Czech" #~ msgstr "Ceh" #~ msgid "Slovakian" #~ msgstr "Slovac" #, fuzzy #~ msgid "Reconfigure local network" #~ msgstr "Reconfigurați rețeaua" #, fuzzy #~ msgid "Connect to Internet with a normal modem" #~ msgstr "Nume de conexiune" #, fuzzy #~ msgid "Connect to Internet using ISDN" #~ msgstr "Nume de conexiune" #, fuzzy #~ msgid "Connect to Internet using DSL (or ADSL)" #~ msgstr "Nume de conexiune" #, fuzzy #~ msgid "Connect to Internet using Cable" #~ msgstr "Nume de conexiune" #, fuzzy #~ msgid "Germany" #~ msgstr "German" #, fuzzy #~ msgid "Germany (1TR6)" #~ msgstr "German" #, fuzzy #~ msgid "What do you wish to do?" #~ msgstr "Ce doriți să faceți ?" #, fuzzy #~ msgid "Install/Rescue" #~ msgstr "Instalare" #, fuzzy #~ msgid "Rescue" #~ msgstr "Redimensionează" #~ msgid "Which partition type do you want?" #~ msgstr "Ce tip de partiție doriți?" #, fuzzy #~ msgid "" #~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n" #~ "installed, or if you wish to use multiple distributions or versions.\n" #~ "\n" #~ "Choose \"Rescue\" if you wish to rescue a version of Linux-Mandrake " #~ "already installed.\n" #~ "\n" #~ "\n" #~ "Select:\n" #~ "\n" #~ " - Recommended: If you have never installed GNU/Linux before, choose " #~ "this.\n" #~ "\n" #~ " - Customized: If you are familiar enough with GNU/Linux, you may then " #~ "choose\n" #~ " the primary usage for your machine. See below for details.\n" #~ "\n" #~ " - Expert: This supposes that you are fluent with GNU/Linux and want to\n" #~ " perform a highly customized installation. As for a \"Customized\"\n" #~ " installation class, you will be able to select the usage for your " #~ "system.\n" #~ " But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE " #~ "DOING!\n" #~ msgstr "" #~ "Alegeți \"Instalare\" dacă nu exista alte versiuni de Linux instalate,\n" #~ "sau dacă doriți să folosiți mai multe versiuni sau distribuții.\n" #~ "\n" #~ "Alegeți \"Actualizare\" dacă doriți să actualizați o versiune\n" #~ "precedentă Mandrake Linux:\n" #~ "%s or %s.\n" #~ "\n" #~ "\n" #~ "Selectare:\n" #~ "\n" #~ " - Automatizat: Dacă n'ați mai instalat Linux niciodată, alegeți " #~ "aceasta.\n" #~ "NOTĂ:\n" #~ " rețeaua nu va fi configurată în timpul instalării, folosiți\n" #~ " \"LinuxConf\" pentru a o configura după ce instalarea s'a terminat.\n" #~ "\n" #~ " - Personalizat: Dacă sunteți destul de familiar cu GNU/Linux, puteți\n" #~ " atunci să alegeți utilizarea principală a calculatorului. Vezi mai " #~ "jos\n" #~ " pentru detalii.\n" #~ "\n" #~ " - Expert: Aceasta presupune că sunteți foarte familiar cu GNU/Linux " #~ "și\n" #~ " doriți să faceți o instalare foarte personalizată. Ca și pentru " #~ "clasa\n" #~ " \"Personalizat\", veți putea să selectați utilizarea sistemului\n" #~ " dumneavoastră.\n" #~ " Dar vă rog, NU ALEGEȚi ACEASTA DECÎT DACĂ ȘTIȚI CE FACEȚI!.\n" #, fuzzy #~ msgid "" #~ "At this point, you may choose what partition(s) to use to install\n" #~ "your Linux-Mandrake system if they have been already defined (from a\n" #~ "previous install of GNU/Linux or from another partitioning tool). In " #~ "other\n" #~ "cases, hard drive partitions must be defined. This operation consists of\n" #~ "logically dividing the computer's hard drive capacity into separate\n" #~ "areas for use.\n" #~ "\n" #~ "\n" #~ "If you have to create new partitions, use \"Auto allocate\" to " #~ "automatically\n" #~ "create partitions for GNU/Linux. You can select the disk for partitioning " #~ "by\n" #~ "clicking on \"hda\" for the first IDE drive,\n" #~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n" #~ "\n" #~ "\n" #~ "Two common partition are: the root partition (/), which is the starting\n" #~ "point of the filesystem's directory hierarchy, and /boot, which contains\n" #~ "all files necessary to start the operating system when the\n" #~ "computer is first turned on.\n" #~ "\n" #~ "\n" #~ "Because the effects of this process are usually irreversible, " #~ "partitioning\n" #~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n" #~ "simplifies the process so that it must not be. Consult the documentation\n" #~ "and take your time before proceeding.\n" #~ "\n" #~ "\n" #~ "You can reach any option using the keyboard: navigate through the " #~ "partitions\n" #~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n" #~ "\n" #~ "- Ctrl-c to create a new partition (when an empty partition is " #~ "selected)\n" #~ "\n" #~ "- Ctrl-d to delete a partition\n" #~ "\n" #~ "- Ctrl-m to set the mount point\n" #~ msgstr "" #~ "În acest punct, veți putea alege partițiile pentru a instala sistemul\n" #~ "Linux-Mandrake dacă acestea au fost deja definite (dintr-o altă " #~ "instalare\n" #~ "prealabilă a unui sistem Linux sau cu ajutorul unui program " #~ "departiționare). În celelalte cazuri, partițiile vor trebui să fie " #~ "create.\n" #~ "Această operație consistă în divizarea logică a capacității discului dur\n" #~ "în arii separate pentru utilizare.\n" #~ "\n" #~ "\n" #~ "Dacă aveți nevoie să creați noi partiții, folosiți \"Auto alocare\" \n" #~ "pentru o creare automată de partiții Linux. Puteți selecta discul pentru\n" #~ "partiționare făcînd clic pe \"hda\" pentru primul disc IDE, \"hdb\" \n" #~ "pentru al doilea sau \"sda\" pentru primul disc SCSI și așa mai departe.\n" #~ "\n" #~ "\n" #~ "Două partiții obișnuite sunt: partiția root (/), punctul de plecare\n" #~ "al ierarhiei sistemului de fișiere și /boot, care conține toate " #~ "fișierele\n" #~ "necesare pentru a demara sistemul de operare cînd calculatorul e aprins.\n" #~ "\n" #~ "\n" #~ "Pentru că efectele acestui proces sunt în mod uzual reversibile,\n" #~ "partiționarea poate fi intimidantă pentru un utilizator ne-experimentat.\n" #~ "De aceea DiskDrake simplifică pe cît posibil acest proces. Consultați\n" #~ "documentația și nu vă grăbiți înainte de a începe.\n" #~ "\n" #~ "\n" #~ "Puteți accede la toate opțiunile cu ajutorul tastaturii: navigați " #~ "printre\n" #~ "partiții folosind tasta Tab și tastele săgeți Sus/Jos. Cînd o partiție\n" #~ "e selectată, puteți folosi:\n" #~ "\n" #~ "- Ctrl-c pentru a crea o nouă partiție (cînd a partiție goală e " #~ "selectată)\n" #~ "\n" #~ "- Ctrl-d pentru a șterge o partiție\n" #~ "\n" #~ "- Ctrl-m pentru a crea un punct de montaj\n" #~ msgid "" #~ "Any partitions that have been newly defined must be formatted for\n" #~ "use (formatting meaning creating a filesystem). At this time, you may\n" #~ "wish to re-format some already existing partitions to erase the data\n" #~ "they contain. Note: it is not necessary to re-format pre-existing\n" #~ "partitions, particularly if they contain files or data you wish to keep.\n" #~ "Typically retained are /home and /usr/local." #~ msgstr "" #~ "Toate partițiile care tocmai au fost definite trebuie să fie formatate\n" #~ "înainte de a fi utilizate. (formatare însemnînd crearea fișierelor " #~ "sistem).\n" #~ "Poate doriți să reformatați partiții pre-existente pentru a șterge \n" #~ "informațiile conținute.\n" #~ "Nota: nu este necesar să formatați partiții mai ales dacă doriți să\n" #~ "conservați informațiile ce le conțin. Partiții de acest gen sunt:\n" #~ "/home și /usr/local." #~ msgid "" #~ "The packages selected are now being installed. This operation\n" #~ "should take a few minutes unless you have chosen to upgrade an\n" #~ "existing system, in that case it can take more time even before\n" #~ "upgrade starts." #~ msgstr "" #~ "Pachetele selectate sunt acum pe cale de fi instalate. Această operație\n" #~ "ar trebui să ia cîteva minute, excepție făcînd Actualizare unei " #~ "distribuții\n" #~ "precedente, caz în care timpul va fi lung înainte ca actualizarea să\n" #~ "înceapă." #, fuzzy #~ msgid "" #~ "If DrakX failed to find your mouse, or if you want to\n" #~ "check what it has done, you will be presented the list of mice\n" #~ "above.\n" #~ "\n" #~ "\n" #~ "If you agree with DrakX's settings, just click 'Ok'.\n" #~ "Otherwise you may choose the mouse that more closely matches your own\n" #~ "from the menu above.\n" #~ "\n" #~ "\n" #~ "In case of a serial mouse, you will also have to tell DrakX\n" #~ "which serial port it is connected to." #~ msgstr "" #~ "Dacă DrakX nu a reușit să detecteze mouse-ul, sau dacă doriți să " #~ "verificați\n" #~ "ceea ce a făcut, vi se va propune lista cu mouse-uri de mai sus.\n" #~ "\n" #~ "\n" #~ "Dacă sunteți de acord cu propunerea lui DrakX, săriți la secțiunea " #~ "dorită\n" #~ "cu un simple în meniu din stînga. Dacă nu, alegeți tipul de mouse care\n" #~ "credeți că se apropie mai mult de cel pe care-l aveți.\n" #~ "\n" #~ "\n" #~ "În cazul unui mouse de tip serie, veți putea specifica portul serie la\n" #~ "care e conectat." #~ msgid "" #~ "This section is dedicated to configuring a local area\n" #~ "network (LAN) or a modem.\n" #~ "\n" #~ "Choose \"Local LAN\" and DrakX will\n" #~ "try to find an Ethernet adapter on your machine. PCI adapters\n" #~ "should be found and initialized automatically.\n" #~ "However, if your peripheral is ISA, autodetection will not work,\n" #~ "and you will have to choose a driver from the list that will appear " #~ "then.\n" #~ "\n" #~ "\n" #~ "As for SCSI adapters, you can let the driver probe for the adapter\n" #~ "in the first time, otherwise you will have to specify the options\n" #~ "to the driver that you will have fetched from documentation of your\n" #~ "hardware.\n" #~ "\n" #~ "\n" #~ "If you install a Linux-Mandrake system on a machine which is part\n" #~ "of an already existing network, the network administrator will\n" #~ "have given you all necessary information (IP address, network\n" #~ "submask or netmask for short, and hostname). If you're setting\n" #~ "up a private network at home for example, you should choose\n" #~ "addresses.\n" #~ "\n" #~ "\n" #~ "Choose \"Dialup with modem\" and the Internet connection with\n" #~ "a modem will be configured. DrakX will try to find your modem,\n" #~ "if it fails you will have to select the right serial port where\n" #~ "your modem is connected to." #~ msgstr "" #~ "Această secțiune este dedicată configurației unei rețele locale (LAN)\n" #~ "sau a unui modem.\n" #~ "\n" #~ "Alegeți \"Rețea LAN\" și DrakX va încerca să detecteze adaptatorul\n" #~ "Ethernet pe care-l aveți. Adaptatorii PCI sunt în general detectați și\n" #~ "inițializați în mod automat.\n" #~ "În cazul unui adaptator ISA, detecția automată nu va funcționa și veți\n" #~ "avea atunci de ales pilotul din lista propusă.\n" #~ "\n" #~ "\n" #~ "La fel și pentru adaptatorii SCSI, puteți lăsa testul mai întîi, dacă nu\n" #~ "puteți specifica opțiunile pentru pilot pe care le-ați recuperat în \n" #~ "documentația hardware-ului.\n" #~ "\n" #~ "\n" #~ "Dacă instalați sistemul Linux-Mandrake pe un calculator care face parte\n" #~ "dintr-o rețea deja existentă, administratorul de rețea vă va da toate\n" #~ "informațiile necesare (adresă IP, sub-mască de rețea sau netmask mai pe\n" #~ "scurt și numele calculatorului). Dacă configurați o rețea privată la\n" #~ "dumneavoastră acasă, de exemplu, va trebui să alegeți adresele singur.\n" #~ "\n" #~ "\n" #~ "Alegeți \"Telefonați cu modem\" și atunci conexiunea Internet va fi\n" #~ "configurată. DrakX va încerca să detecteze modemul și dacă nu reușește\n" #~ "vă va propune portul serie la care modemul e conectat." #, fuzzy #~ msgid "" #~ "GNU/Linux can deal with many types of printer. Each of these\n" #~ "types require a different setup. Note however that the print\n" #~ "spooler uses 'lp' as the default printer name; so you\n" #~ "must have one printer with such a name; but you can give\n" #~ "several names, separated by '|' characters, to a printer.\n" #~ "So, if you prefer to have a more meaningful name you just have\n" #~ "to put it first, eg: \"My Printer|lp\".\n" #~ "The printer having \"lp\" in its name(s) will be the default printer.\n" #~ "\n" #~ "\n" #~ "If your printer is physically connected to your computer, select\n" #~ "\"Local printer\". You will then have to tell which port your\n" #~ "printer is connected to, and select the appropriate filter.\n" #~ "\n" #~ "\n" #~ "If you want to access a printer located on a remote Unix machine,\n" #~ "you will have to select \"Remote lpd\". In order to make\n" #~ "it work, no username or password is required, but you will need\n" #~ "to know the name of the printing queue on this server.\n" #~ "\n" #~ "\n" #~ "If you want to access a SMB printer (which means, a printer located\n" #~ "on a remote Windows 9x/NT machine), you will have to specify its\n" #~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n" #~ "plus the username, workgroup and password required in order to\n" #~ "access the printer, and of course the name of the printer. The same goes\n" #~ "for a NetWare printer, except that you need no workgroup information." #~ msgstr "" #~ "Linux poate gera multe tipuri de imprimante. Fiecare din aceste tipuri\n" #~ "necesită o instalare diferită. Notați că \"spool\"-ul de imprimantă\n" #~ "folosește \"lp\" pentru numele din oficiu al imprimantei; deci va trebui\n" #~ "să aveți o imprimantă cu un acest nume; dar îi veți putea da mai multe " #~ "nume,\n" #~ "separate de caractere '|'. Deci, dacă doriți să aveți unele nume mai " #~ "pline\n" #~ "de sens, veți putea folosi, de exemplu: \"Imprimanta mea|lp\".\n" #~ "Imprimanta care are are \"lp\" printre numele ei va fi considerată ca\n" #~ "imprimanta din oficiu.\n" #~ "\n" #~ "\n" #~ "Dacă imprimanta e conectată fizic la calculator, selectați atunci\n" #~ "\"Imprimantă locală\". Veți avea apoi a intra numele portului de\n" #~ "imprimantă la care aceasta e conectată și a selecta filtrul apropriat\n" #~ "Portul LPT1 devine lp0 în Linux\n" #~ "\n" #~ "\n" #~ "Dacă doriți să accedeți la un calculator Unix distant, veți avea a " #~ "selecta\n" #~ "\"lpd distant\". Pentru a o face să funcționeze, nu aveți nevoie de " #~ "parolă\n" #~ "sau de nume de utilizator, dar va trebui să știți care e numele cozii de\n" #~ "imprimare de pe acest server-ului.\n" #~ "\n" #~ "\n" #~ "Dacă doriți să acedeți la o imprimantă SMB (adică la o imprimantă " #~ "conectată\n" #~ "fizic la un calculator distant cu un sistem Windows), va trebui să \n" #~ "specificați numele ei SMB (care nu e numele ei TCP/IP) și probabil " #~ "adresa\n" #~ "ei IP, plus numele utilizatorului, al grupului de lucru și parola cerută\n" #~ "pentru a accede la imprimantă și bineînțeles numele imprimantei. " #~ "Lucrurile\n" #~ "sunt similare pentru o imprimantă Netware, excepție făcînd faptul că nu\n" #~ "aveți nevoie de informația de grup de lucru." #, fuzzy #~ msgid "" #~ "It is strongly recommended that you answer \"Yes\" here. If you install\n" #~ "Microsoft Windows at a later date it will overwrite the boot sector.\n" #~ "Unless you have made a bootdisk as suggested, you will not be able to\n" #~ "boot into GNU/Linux any more." #~ msgstr "" #~ "E foarte indicat să răspundeți \"Da\" aici. Dacă instalați Microsoft \n" #~ "Windows mai tîrziu, acest a vă va șterge sectorul de demaraj al " #~ "discului.\n" #~ "Dacă nu aveți un floppy de demaraj, nu veți mai putea demara Linux." #~ msgid "Forget the changes?" #~ msgstr "Abandonați schimbările?" #~ msgid "What is the type of your mouse?" #~ msgstr "Ce tip de mouse aveți?" #~ msgid "Automatic resolutions" #~ msgstr "Rezoluții alese în mod automat" #~ msgid "" #~ "To find the available resolutions I will try different ones.\n" #~ "Your screen will blink...\n" #~ "You can switch if off if you want, you'll hear a beep when it's over" #~ msgstr "" #~ "Pentru a afla rezoluțiile disponibile voi încerca altele diferite.\n" #~ "Ecranul dumneavoastră se va stinge și aprinde de cîteva ori..." #~ msgid "" #~ "I can try to find the available resolutions (eg: 800x600).\n" #~ "Sometimes, though, it may hang the machine.\n" #~ "Do you want to try?" #~ msgstr "" #~ "Pot să încerc să găsesc rezoluțiile disponibile (eg:800x600).\n" #~ "Uneori, totuși, aceasta poate bloca calculatorul.\n" #~ "Doriți să încerc ?" #~ msgid "" #~ "No valid modes found\n" #~ "Try with another video card or monitor" #~ msgstr "" #~ "N'am găsit moduri valide\n" #~ "Încercați cu o altă carte video sau alt monitor" #~ msgid "Automatical resolutions search" #~ msgstr "Configurarea automată a rezoluțiilor" #~ msgid "Apple ADB Mouse" #~ msgstr "Mouse Apple ADB" #~ msgid "Apple ADB Mouse (2 Buttons)" #~ msgstr "Mouse Apple ADB (2 Butoane)" #~ msgid "Apple ADB Mouse (3+ Buttons)" #~ msgstr "Mouse Apple ADB (3+ Butoane)" #~ msgid "Apple USB Mouse" #~ msgstr "Mouse Apple USB" #~ msgid "Apple USB Mouse (2 Buttons)" #~ msgstr "Mouse Apple USB (2 Butoane)" #~ msgid "Apple USB Mouse (3+ Buttons)" #~ msgstr "Mouse Apple USB (3+ Butoane)" #~ msgid "ASCII MieMouse" #~ msgstr "ASCII MieMouse" #~ msgid "Genius NetMouse Pro" #~ msgstr "Genius NetMouse Pro" #~ msgid "ATI Bus Mouse" #~ msgstr "Mouse ATI Bus" #~ msgid "Microsoft Bus Mouse" #~ msgstr "Mouse Microsoft Bus" #~ msgid "Logitech Bus Mouse" #~ msgstr "Mouse Logitech Bus" #~ msgid "USB Mouse (3 buttons or more)" #~ msgstr "Mouse USB (3 butoane sau mai multe)" #~ msgid "Microsoft Rev 2.1A or higher (serial)" #~ msgstr "Microsoft Rev 2.1A sau mai mult (serie)" #~ msgid "Logitech MouseMan+/FirstMouse+ (serial)" #~ msgstr "Logitech MouseMan+/FirstMouse+ (serie)" #~ msgid "ASCII MieMouse (serial)" #~ msgstr "ASCII MieMouse (serie)" #~ msgid "Genius NetMouse (serial)" #~ msgstr "Genius NetMouse (serie)" #~ msgid "Generic Mouse (serial)" #~ msgstr "Mouse serie generic" #~ msgid "Microsoft compatible (serial)" #~ msgstr "Mouse Microsoft compatibil (serie)" #~ msgid "Generic 3 Button Mouse (serial)" #~ msgstr "Mouse serie generic cu 3 butoane" #, fuzzy #~ msgid "Kensington Thinking Mouse (serial)" #~ msgstr "Kensington Thinking Mouse" #~ msgid "nfs mount failed" #~ msgstr "montarea nfs a eșuat" #~ msgid "CHAP" #~ msgstr "CHAP" #~ msgid "Cryptographic" #~ msgstr "Criptografie" #~ msgid "Do you want to configure a local network for your system?" #~ msgstr "Doriți sa configurați rețeaua LAN pentru sistemul dumneavoastră?" #~ msgid "Show less" #~ msgstr "Afișați mai puțin" #~ msgid "Show more" #~ msgstr "Afișați mai mult" #~ msgid "tie" #~ msgstr "cravată" #~ msgid "brunette" #~ msgstr "brunetă" #~ msgid "girl" #~ msgstr "fată" #~ msgid "woman-blond" #~ msgstr "femeie blondă" #~ msgid "automagic" #~ msgstr "automagic" #~ msgid "What is your keyboard layout?" #~ msgstr "Care e dispoziția tastaturii?" #~ msgid "Try to find PCMCIA cards?" #~ msgstr "Să încerc să găsesc cartelele PCMCIA?" #~ msgid "Try to find %s devices?" #~ msgstr "Să încerc să găsesc periferice %s?" #~ msgid "Modem Configuration" #~ msgstr "Configurație modem" #~ msgid "" #~ "Do you want to configure a dialup connection with modem for your system?" #~ msgstr "Doriți sa configurați o conexiune telefonică prin modem?" #~ msgid "Try to find PCI devices?" #~ msgstr "Să încerc să găsesc periferice PCI?" #~ msgid "Searching root partition." #~ msgstr "În căutarea partiției root" #~ msgid "%s: This is not a root partition, please select another one." #~ msgstr "%s: Aceasta nu e o partiție root, vă rog alegeți o alta" #~ msgid "No root partition found" #~ msgstr "N'am găsit nici o partiție root" #~ msgid "Please choose a partition to use as your root partition." #~ msgstr "Vă rog alegeți o partiție pentru a o folosi ca partiție root?." #~ msgid "You don't have any enough room for Lnx4win" #~ msgstr "Nu aveți destul spațiu pentru Lnx4win" #~ msgid ", %U MB" #~ msgstr ", %U MB" # NOTE: this message will be displayed by lilo at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is then suggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # When possible cp437 accentuated letters can be used too. # #~ msgid "" #~ "Welcome to LILO the operating system chooser!\n" #~ "\n" #~ "To list the possible choices, press .\n" #~ "\n" #~ "To load one of them, write its name and press or wait %d seconds " #~ "for default boot.\n" #~ "\n" #~ msgstr "" #~ "Bun venit la gestionarul de sisteme de operare LILO!\n" #~ "Pentru a lista posibilitatile, apasati .\n" #~ "\n" #~ "Pentru a lansa unul dintre ele, scrietii numele si apasati sau\n" #~ "asteptati %d secunde pentru demararea din oficiu.\n" #~ "\n" # NOTE: this message will be displayed by SILO at boot time; that is # only the ascii charset will be available # so use only 7bit for this message # #~ msgid "" #~ "Welcome to SILO the operating system chooser!\n" #~ "\n" #~ "To list the possible choices, press .\n" #~ "\n" #~ "To load one of them, write its name and press or\n" #~ "wait %d seconds for default boot.\n" #~ "\n" #~ msgstr "" #~ "Bun venit la gestionarul de sisteme de operare SILO!\n" #~ "\n" #~ "Pentru a afisa diferitele posibilitati, apasati .\n" #~ "\n" #~ "Pentru a demara unul dintre ele, scrieti-i numele si apasati sau\n" #~ "asteptati %d secunde pentru demararea din oficiu.\n" #~ "\n" #~ msgid "SILO main options" #~ msgstr "Opținunile principale ale lui SILO" #~ msgid "" #~ "Here are the following entries in SILO.\n" #~ "You can add some more or change the existing ones." #~ msgstr "" #~ "Iată următoarele intrări din SILO.\n" #~ "Puteți adăuga mai multe sau schimba cele existente." #~ msgid "This label is already in use" #~ msgstr "Această etichetă e deja utilizată" #~ msgid "Installation of SILO failed. The following error occured:" #~ msgstr "Instalarea lui SILO a eșuat. Următoarea eroare a apărut:" #~ msgid "" #~ "DrakX will attempt at first to look for one or more PCI\n" #~ "SCSI adapter(s). If it finds it (or them) and knows which driver(s)\n" #~ "to use, it will insert it (them) automatically.\n" #~ "\n" #~ "\n" #~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n" #~ "doesn't know which driver to use for this card, or if you have no\n" #~ "SCSI adapters at all, you will then be prompted on whether you have\n" #~ "one or not. If you have none, answer \"No\". If you have one or more,\n" #~ "answer \"Yes\". A list of drivers will then pop up, from which you\n" #~ "will have to select one.\n" #~ "\n" #~ "\n" #~ "After you have selected the driver, DrakX will ask if you\n" #~ "want to specify options for it. First, try and let the driver\n" #~ "probe for the hardware: it usually works fine.\n" #~ "\n" #~ "\n" #~ "If not, do not forget the information on your hardware that you\n" #~ "could get from your documentation or from Windows (if you have it\n" #~ "on your system), as suggested by the installation guide. These\n" #~ "are the options you will need to provide to the driver." #~ msgstr "" #~ "DrakX va încerca mai întîi să caute unul sau mai mulți adaptatori PCI\n" #~ "sau SCSI. Dacă căutarea e fructuoasă și știe ce pilot să folosească,\n" #~ "atunci îl (le) va instala în mod automat.\n" #~ "\n" #~ "\n" #~ "Dacă adaptatorul este o carte ISA, sau est e o carte PCI și DrakX\n" #~ "nu știe ce pilot să folosească sau dacă nu aveți nici un adaptator SCSI\n" #~ "veți fi mai apoi întrebat dacă aveți unul sau nu. Dacă nu aveți nici " #~ "unul\n" #~ "răspundeți \"Nu\". Dacă aveți unul sau mai multe, răspundeti \"Da\".\n" #~ "O listă cu piloți va va permite atunci să alegeți unul.\n" #~ "\n" #~ "\n" #~ "După ce ați selecționat pilotul, DrakX vă va întreba dacă doriți\n" #~ "să specificați opțiuni pentru el (ei). Mai întîi încercați și lăsați\n" #~ "pilotul să testeze hardware-ul: în mod normal aceasta funcționează bine.\n" #~ "\n" #~ "\n" #~ "Dacă nu, nu uitați informațiile despre hardware pe care le-ați putea " #~ "găsi\n" #~ "în documentația dumneavoastră sau din Windows (dacă l-aveți instalat), " #~ "așa\n" #~ "cum e sugerat în ghidul de instalare. Acestea sunt opțiuni pe care le " #~ "veți\n" #~ "furniza pilotului." #~ msgid "Shutting down" #~ msgstr "Oprire" #~ msgid "useless" #~ msgstr "nefolositor" #~ msgid "garbage" #~ msgstr "gunoi" #~ msgid "" #~ "Some true type fonts from windows have been found on your computer.\n" #~ "Do you want to use them? Be sure you have the right to use them under " #~ "Linux." #~ msgstr "" #~ "Am găsit ceva caractere din windows.\n" #~ "Doriți să le folosiți ? Asigurați-vă ca aveți dreptul să le folosiți\n" #~ "în Linux." #~ msgid "" #~ "Choose \"Install\" if there are no previous versions of Linux\n" #~ "installed, or if you wish to use multiple distributions or versions.\n" #~ "\n" #~ "\n" #~ "Choose \"Upgrade\" if you wish to update a previous version of Mandrake " #~ "Linux:\n" #~ "5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios), Gold " #~ "2000\n" #~ "or 7.0 (Air)." #~ msgstr "" #~ "Alegeți \"Instalare\" dacă nu exista alte versiuni de Linux instalate,\n" #~ "sau dacă doriți să folosiți mai multe versiuni sau distribuții.\n" #~ "\n" #~ "\n" #~ "Alegeți \"Actualizare\" dacă doriți să actualizați o versiune precedentă\n" #~ "Mandrake Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen), 6.0 (Venus),\n" #~ "6.1 (Helios), Gold 2000 or 7.0 (Air)." #~ msgid "Do you want to use LILO?" #~ msgstr "Doriți să utilizați LILO?" #~ msgid "Choose other CD to install" #~ msgstr "Alegeți alt CD de instalat" #~ msgid "" #~ "Select:\n" #~ "\n" #~ " - Automated: If you have never installed Linux before.\n" #~ "\n" #~ "\n" #~ " - Customized: If you are familiar with Linux, you will be able to \n" #~ "select the usage for the installed system between normal, development or\n" #~ "server. Choose \"Normal\" for a general purpose installation of your\n" #~ "computer. You may choose \"Development\" if you will be using the " #~ "computer\n" #~ "primarily for software development, or choose \"Server\" if you wish to\n" #~ "install a general purpose server (for mail, printing...).\n" #~ "\n" #~ "\n" #~ " - Expert: If you are fluent with GNU/Linux and want to perform\n" #~ "a highly customized installation, this Install Class is for you. You " #~ "will\n" #~ "be able to select the usage of your installed system as for \"Customized" #~ "\"." #~ msgstr "" #~ "Selecționează:\n" #~ "\n" #~ " - Automatizat: Dacă nu ați mai instalat niciodată Linux, sau dacă " #~ "doriți\n" #~ "să instalați distribuția aleasă \"Produsul anului\" în anul 1999, faceți\n" #~ "clic aici.\n" #~ "\n" #~ " - Personalizat: Dacă sunteți obișnuit cu Linux și veți fi capabil să\n" #~ "alegeți scopul sistemului instalat între normal, progamator sau server.\n" #~ "Alegeți \"Normal\" pentru o utilizare generală a calculatorului. Puteți\n" #~ "alege \"Programator\" dacă veți folosi calculatorul în principal pentru\n" #~ "programare sau \"Server\" dacă doriți să instalați un server general\n" #~ "(pentru mail, imprimare...)\n" #~ "\n" #~ " - Expert: Dacă cunoașteți bine GNU/Linux și doriți să alegeți un tip " #~ "de\n" #~ "instalare personalizabilă in cele mai mici detalii, selectați acest tip.\n" #~ "Veți fi capabil să selectați destinația sistemului dumneavoastră ca și\n" #~ "pentru \"Personalizat\"." #~ msgid "Setup SCSI" #~ msgstr "Instalare SCSI" #~ msgid "expert" #~ msgstr "expert" #~ msgid "developer" #~ msgstr "programator" #~ msgid "beginner" #~ msgstr "începător" #~ msgid "After %s partition %s," #~ msgstr "După %s partiție %s," #~ msgid "changing type of" #~ msgstr "schimbă tipul de" #~ msgid "formatting" #~ msgstr "formatare" #~ msgid "resizing" #~ msgstr "redimensionează" #~ msgid "Size: %s MB" #~ msgstr "Cantitatea: %s MB" #~ msgid "Password:" #~ msgstr "Parola:" #~ msgid "User name:" #~ msgstr "Numele utilizatorului:" #~ msgid "Choose install or upgrade" #~ msgstr "Alegeți Instalare sau Actualizare" del'>-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \\\"%s\\\" to reboot the system. The first thing you\n"
-"should see after your computer has finished doing its hardware tests is the\n"
-"bootloader menu, giving you the choice of which operating system to start.\n"
-"\n"
-"The \\\"%s\\\" button shows two more buttons to:\n"
-"\n"
-" * \\\"%s\\\": to create an installation floppy disk that will automatically\n"
-"perform a whole installation without the help of an operator, similar to\n"
-"the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \\\"%s\\\". This is a partially automated installation. The partitioning\n"
-"step is the only interactive procedure.\n"
-"\n"
-" * \\\"%s\\\". Fully automated installation: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \\\"%s\\\"(*): saves a list of the packages selected in this installation.\n"
-"To use this selection with another installation, insert the floppy and\n"
-"start the installation. At the prompt, press the [F1] key and type >>linux\n"
-"defcfg=\\\"floppy\\\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\\\"mformat a:\\\")"
-msgstr ""
-
#: ../../lang.pm:1
#, c-format
msgid "Virgin Islands (British)"
@@ -11623,6 +11595,40 @@ msgid ""
"please click Wizard or Advanced."
msgstr ""
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+
#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
msgid "Remove"
@@ -11719,6 +11725,11 @@ msgid ""
" in the CD drive under mount point /mnt/cdrom"
msgstr ""
+#: ../../network/network.pm:1
+#, c-format
+msgid "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add enough '0' (zeroes)."
+msgstr ""
+
#: ../../network/netconnect.pm:1
#, c-format
msgid "Choose the connection you want to configure"
@@ -11825,6 +11836,62 @@ msgstr ""
msgid "Empty"
msgstr ""
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
+"\n"
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
+"\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
+"\n"
+"\n"
+"\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
+msgstr ""
+
#: ../../standalone/draksplash:1
#, c-format
msgid "text width"
@@ -11840,6 +11907,11 @@ msgstr ""
msgid "The default lease (in seconds)"
msgstr ""
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Interface \"%s\""
+msgstr ""
+
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "With basic documentation (recommended!)"
@@ -11890,11 +11962,6 @@ msgstr ""
msgid "official vendor name of the cpu"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Once you've selected a device, you'll be able to see the device information in fields displayed on the right frame (\\\"Information\\\")"
-msgstr ""
-
#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1 ../../standalone/harddrake2:1
#, c-format
msgid "Vendor"
@@ -11935,56 +12002,6 @@ msgstr ""
msgid "Launch userdrake"
msgstr ""
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \\\"root\\\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
-"variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \\\"root\\\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \\\"root\\\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
-msgstr ""
-
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Is this an install or an upgrade?"
@@ -11995,9 +12012,9 @@ msgstr ""
msgid "ISDN card"
msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Found \\\"%s\\\" interface do you want to use it ?"
+msgid "To share your own knowledge and help build Linux software, join our discussion forums on our \"Community\" webpages."
msgstr ""
#: ../../network/netconnect.pm:1
@@ -12016,14 +12033,38 @@ msgid ""
""
msgstr ""
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
+"\n"
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
+msgstr ""
+
#: ../../printer/main.pm:1
#, c-format
msgid "Printer on remote CUPS server"
msgstr ""
-#: ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "\\\"%s\\\" based winmodem detected, do you want to install needed software ?"
+msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
msgstr ""
#: ../../standalone/drakperm:1
@@ -12175,18 +12216,6 @@ msgstr ""
msgid "Network configuration (%d adapters)"
msgstr ""
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Click on \\\"%s\\\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \\\"%s\\\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \\\"%s\\\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
msgid "Mandatory package %s is missing"
@@ -12264,11 +12293,6 @@ msgstr ""
msgid "Lilo screen"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on \\\"Manual configuration\\\"."
-msgstr ""
-
#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
msgid "LILO with graphical menu"
@@ -12284,6 +12308,11 @@ msgstr ""
msgid "You can't unselect this package. It is already installed"
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr ""
+
#: ../../install_steps_gtk.pm:1 ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Go on anyway?"
@@ -12314,9 +12343,18 @@ msgstr ""
msgid "Either the server name or the server's IP must be given!"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Printing/Photo Card Access on \\\"%s\\\""
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to install\n"
+"SILO on your system, or another operating system removes SILO, or SILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used with\n"
+"the Mandrake rescue image, making it much easier to recover from severe system\n"
+"failures.\n"
+"\n"
+"If you want to create a bootdisk for your system, insert a floppy in the first\n"
+"drive and press \"Ok\"."
msgstr ""
#: ../../fsedit.pm:1
@@ -12461,6 +12499,11 @@ msgstr ""
msgid "The encryption keys do not match"
msgstr ""
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Right \"Windows\" key"
+msgstr ""
+
#: ../../standalone/drakbackup:1
#, c-format
msgid "CDROM / DVDROM"
@@ -12471,6 +12514,14 @@ msgstr ""
msgid "if set to yes, check empty password in /etc/shadow."
msgstr ""
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
+msgstr ""
+
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
@@ -12601,14 +12652,19 @@ msgstr ""
msgid "European protocol"
msgstr ""
+#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid ", printer \"%s\" on server \"%s\""
+msgstr ""
+
#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1 ../../interactive/http.pm:1 ../../standalone/drakboot:1 ../../standalone/drakboot:1 ../../standalone/drakboot:1 ../../standalone/drakboot:1 ../../standalone/drakboot:1 ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 ../../standalone/drakfloppy:1 ../../standalone/drakfloppy:1 ../../standalone/drakfont:1 ../../standalone/draksplash:1
#, c-format
msgid "Error"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../any.pm:1
#, c-format
-msgid " on LPD server \\\"%s\\\", printer \\\"%s\\\""
+msgid "allow \"su\""
msgstr ""
#: ../../lang.pm:1 ../../standalone/drakxtv:1
@@ -12621,6 +12677,11 @@ msgstr ""
msgid "please wait during ttmkfdir..."
msgstr ""
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "Configure only card \"%s\"%s"
+msgstr ""
+
#: ../../standalone/harddrake2:1
#, c-format
msgid "Level"
@@ -12653,11 +12714,21 @@ msgstr ""
msgid "mount failed: "
msgstr ""
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "the GNU/Linux kernel needs to run a calculation loop at boot time to initialize a timer counter. Its result is stored as bogomips as a way to \"benchmark\" the cpu."
+msgstr ""
+
#: ../../any.pm:1
#, c-format
msgid "Image"
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
+msgstr ""
+
#: ../../services.pm:1
#, c-format
msgid "Remote Administration"
@@ -12678,15 +12749,6 @@ msgstr ""
msgid "CUPS - Common Unix Printing System"
msgstr ""
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"\\\"%s\\\": if a sound card is detected on your system, it is displayed here.\n"
-"If you notice the sound card displayed is not the one that is actually\n"
-"present on your system, you can click on the button and choose another\n"
-"driver."
-msgstr ""
-
#: ../../standalone/logdrake:1
#, c-format
msgid "Webmin Service"
@@ -12712,15 +12774,6 @@ msgstr ""
msgid "Greece"
msgstr ""
-#: ../../diskdrake/dav.pm:1
-#, c-format
-msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \\\"New\\\"."
-msgstr ""
-
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "An error occurred"
@@ -12772,27 +12825,11 @@ msgstr ""
msgid "Give the ram size in MB"
msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer \\\"%s\\\" on server \\\"%s\\\""
-msgstr ""
-
#: ../../any.pm:1
#, c-format
msgid "Real name"
msgstr ""
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Options\n"
-"\n"
-" Here you can choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\\\"%s\\\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
-msgstr ""
-
#: ../../standalone/drakfont:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1
#, c-format
msgid "done"
@@ -12902,11 +12939,6 @@ msgstr ""
msgid "There is no FAT partition to resize (or not enough space left)"
msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid ", host \\\"%s\\\", port %s"
-msgstr ""
-
#: ../../standalone/drakperm:1
#, c-format
msgid "Up"
@@ -12987,59 +13019,6 @@ msgstr ""
msgid "Do you have another one?"
msgstr ""
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various groups, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' group installed.\n"
-"\n"
-" * \\\"%s\\\": if you plan to use your machine as a workstation, select one or\n"
-"more of the applications that are in the workstation group.\n"
-"\n"
-" * \\\"%s\\\": if plan on using your machine for programming, choose the\n"
-"appropriate packages from that group.\n"
-"\n"
-" * \\\"%s\\\": if your machine is intended to be a server, select which of the\n"
-"more common services you wish to install on your machine.\n"
-"\n"
-" * \\\"%s\\\": this is where you will choose your preferred graphical\n"
-"environment. At least one must be selected if you want to have a graphical\n"
-"interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \\\"%s\\\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \\\"%s\\\": installs the base system plus basic utilities and their\n"
-"documentation. This installation is suitable for setting up a server.\n"
-"\n"
-" * \\\"%s\\\": will install the absolute minimum number of packages necessary\n"
-"to get a working Linux system. With this installation you will only have a\n"
-"command line interface. The total size of this installation is about 65\n"
-"megabytes.\n"
-"\n"
-"You can check the \\\"%s\\\" box, which is useful if you are familiar with the\n"
-"packages being offered or if you want to have total control over what will\n"
-"be installed.\n"
-"\n"
-"If you started the installation in \\\"%s\\\" mode, you can unselect all groups\n"
-"to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
#: ../../printer/main.pm:1
#, c-format
msgid ", printing to %s"
@@ -13050,23 +13029,6 @@ msgstr ""
msgid "Assign host name from DHCP address"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. Now you can scan with \\\"scanimage\\\" (\\\"scanimage -d hp:%s\\\" to specify the scanner when you have more than one) from the command line or with the graphical interfaces \\\"xscanimage\\\" or \\\"xsane\\\". If you are using the GIMP, you can also scan by choosing the appropriate point in the \\\"File\\\"/\\\"Acquire\\\" menu. Call also \\\"man scanimage\\\" on the command line to get more information.\n"
-"\n"
-"Do not use \\\"scannerdrake\\\" for this device!"
-msgstr ""
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \\\"%s\\\" in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Toggle to normal mode"
@@ -13196,11 +13158,6 @@ msgstr ""
msgid "Suriname"
msgstr ""
-#: ../../share/advertising/08-store.pl:1
-#, c-format
-msgid "Our full range of Linux solutions, as well as special offers on products and other \\\"goodies\\\", are available on our e-store:"
-msgstr ""
-
#: ../../any.pm:1
#, c-format
msgid "Enable ACPI"
@@ -13284,6 +13241,26 @@ msgstr ""
msgid "Username required"
msgstr ""
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
+msgstr ""
+
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "SMB (Windows 9x/NT) Printer Options"
@@ -13441,14 +13418,6 @@ msgstr ""
msgid "Normal Mode"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"A printer named \\\"%s\\\" already exists under %s. \n"
-"Click \\\"Transfer\\\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
@@ -13492,6 +13461,11 @@ msgstr ""
msgid "Restarting CUPS..."
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr ""
+
#: ../../install_steps.pm:1
#, c-format
msgid "Duplicate mount point %s"
@@ -13512,6 +13486,22 @@ msgstr ""
msgid "Unknown|Generic"
msgstr ""
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
+msgstr ""
+
#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1 ../../standalone/drakperm:1 ../../standalone/draksplash:1 ../../standalone/harddrake2:1 ../../standalone/logdrake:1 ../../standalone/scannerdrake:1
#, c-format
msgid "Quit"
@@ -13537,43 +13527,22 @@ msgstr ""
msgid "Other MultiMedia devices"
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1
+#, c-format
+msgid "No remote machines"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Listed here are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\\\"/\\\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \\\"/home\\\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \\\"Name\\\", \\\"Capacity\\\".\n"
-"\n"
-"\\\"Name\\\" is structured: \\\"hard drive type\\\", \\\"hard drive number\\\",\n"
-"\\\"partition number\\\" (for example, \\\"hda1\\\").\n"
"\n"
-"\\\"Hard drive type\\\" is \\\"hd\\\" if your hard drive is an IDE hard drive and\n"
-"\\\"sd\\\" if it is a SCSI hard drive.\n"
-"\n"
-"\\\"Hard drive number\\\" is always a letter after \\\"hd\\\" or \\\"sd\\\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \\\"a\\\" means \\\"master hard drive on the primary IDE controller\\\";\n"
-"\n"
-" * \\\"b\\\" means \\\"slave hard drive on the primary IDE controller\\\";\n"
+"Welcome to the Printer Setup Wizard\n"
"\n"
-" * \\\"c\\\" means \\\"master hard drive on the secondary IDE controller\\\";\n"
+"This wizard will help you to install your printer(s) connected to this computer.\n"
"\n"
-" * \\\"d\\\" means \\\"slave hard drive on the secondary IDE controller\\\".\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected.\n"
"\n"
-"With SCSI hard drives, an \\\"a\\\" means \\\"lowest SCSI ID\\\", a \\\"b\\\" means\n"
-"\\\"second lowest SCSI ID\\\", etc."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1
-#, c-format
-msgid "No remote machines"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now."
msgstr ""
#: ../../install_steps_interactive.pm:1
@@ -13611,13 +13580,6 @@ msgstr ""
msgid "Thailand"
msgstr ""
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"The per-user sharing uses the group \\\"fileshare\\\". \n"
-"You can use userdrake to add a user to this group."
-msgstr ""
-
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Routers:"
@@ -13658,108 +13620,13 @@ msgstr ""
msgid "If no port is given, 631 will be taken as default."
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrd image must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a graphical interface\n"
-" \t\tto help manage/customize these images.\n"
-"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \\\"i386/boot/boot-3c509.2.4.18-6mdk.nbi\\\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \\\"#type\\\" entry is only used by drakTermServ. Clients can either be \\\"thin\\\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where mkinitrd-net\n"
-" \t\tputs it's images.\n"
-"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Change your Cd-Rom!\n"
"\n"
-""
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
#: ../../keyboard.pm:1
@@ -13859,6 +13726,35 @@ msgstr ""
msgid "Your choice? (0/1, default `%s') "
msgstr ""
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
+"\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
+"\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
+"\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
+"\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
+"\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
+msgstr ""
+
#: ../../keyboard.pm:1 ../../keyboard.pm:1
#, c-format
msgid "French"
@@ -13889,15 +13785,6 @@ msgstr ""
msgid " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig program. Just type \\\"sndconfig\\\" in a console."
-msgstr ""
-
#: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1
#, c-format
msgid "Next"
@@ -13934,6 +13821,18 @@ msgstr ""
msgid "Puerto Rico"
msgstr ""
+#: ../../standalone/draksplash:1
+#, c-format
+msgid ""
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr ""
+
#: ../../install_any.pm:1
#, c-format
msgid ""
@@ -14023,11 +13922,6 @@ msgstr ""
msgid "Restore from Hard Disk."
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Run \\\"sndconfig\\\" after installation to configure your sound card"
-msgstr ""
-
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Add to LVM"
@@ -14105,11 +13999,6 @@ msgstr ""
msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printing on the printer \\\"%s\\\""
-msgstr ""
-
#: ../../services.pm:1
#, c-format
msgid ""
@@ -14152,11 +14041,6 @@ msgstr ""
msgid "ethernet card(s) detected"
msgstr ""
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Error: The \\\"%s\\\" driver for your sound card is unlisted"
-msgstr ""
-
#: ../../standalone/logdrake:1
#, c-format
msgid "Syslog"
@@ -14182,6 +14066,11 @@ msgstr ""
msgid "Set root password"
msgstr ""
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "There's no free driver for your sound card (%s), but there's a proprietary driver at \"%s\"."
+msgstr ""
+
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
@@ -14207,11 +14096,6 @@ msgstr ""
msgid "/_About..."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printing/Scanning on \\\"%s\\\""
-msgstr ""
-
#: ../../keyboard.pm:1
#, c-format
msgid "Bengali"
@@ -14282,11 +14166,6 @@ msgstr ""
msgid "Done"
msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "To get a list of the options available for the current printer click on the \\\"Print option list\\\" button."
-msgstr ""
-
#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Web Server"
@@ -14309,6 +14188,14 @@ msgstr ""
msgid "The inkjet printer drivers provided by Lexmark only support local printers, no printers on remote machines or print server boxes. Please connect your printer to a local port or configure it on the machine where it is connected to."
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Your multi-function device was configured automatically to be able to scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the scanner when you have more than one) from the command line or with the graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, you can also scan by choosing the appropriate point in the \"File\"/\"Acquire\" menu. Call also \"man scanimage\" on the command line to get more information.\n"
+"\n"
+"Do not use \"scannerdrake\" for this device!"
+msgstr ""
+
#: ../../any.pm:1
#, c-format
msgid "(already added %s)"
@@ -14319,11 +14206,6 @@ msgstr ""
msgid ", using command %s"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Failed to configure printer \\\"%s\\\"!"
-msgstr ""
-
#: ../../keyboard.pm:1
#, c-format
msgid "Alt and Shift keys simultaneously"
@@ -14402,6 +14284,47 @@ msgstr ""
#: ../../help.pm:1
#, c-format
msgid ""
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
+"\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
+"\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
+"\n"
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
+"\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
+"\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
+"\n"
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
+msgstr ""
+
+#: ../../help.pm:1
+#, c-format
+msgid ""
"At this point, DrakX will allow you to choose the security level desired\n"
"for the machine. As a rule of thumb, the security level should be set\n"
"higher if the machine will contain crucial data, or if it will be a machine\n"
@@ -14426,44 +14349,6 @@ msgstr ""
msgid "Boot Floppy"
msgstr ""
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes were discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \\\"%s\\\". Clicking \\\"%s\\\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \\\"%s\\\" option is used to disable the warning dialog which appears\n"
-"whenever the installer automatically selects a package to resolve a\n"
-"dependency issue. Some packages have relationships between each other such\n"
-"that installation of a package requires that some other program is also\n"
-"rerquired to be installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
-
#: ../../keyboard.pm:1 ../../keyboard.pm:1
#, c-format
msgid "Norwegian"
@@ -14474,11 +14359,6 @@ msgstr ""
msgid "Searching for new scanners ..."
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Lithuanian \\\"number row\\\" QWERTY"
-msgstr ""
-
#: ../../standalone/logdrake:1
#, c-format
msgid "Apache World Wide Web Server"
@@ -14499,30 +14379,6 @@ msgstr ""
msgid "Configure bootsplash picture"
msgstr ""
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \\\"%s\\\": For the most part, this completely wipes out the old system. If\n"
-"you wish to change how your hard drives are partitioned, or change the file\n"
-"system, you should use this option. However, depending on your partitioning\n"
-"scheme, you can prevent some of your existing data from being over-written.\n"
-"\n"
-" * \\\"%s\\\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \\\"8.1\\\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \\\"8.1\\\" is not recommended."
-msgstr ""
-
#: ../../lang.pm:1 ../../lang.pm:1
#, c-format
msgid "China"
@@ -14587,20 +14443,9 @@ msgstr ""
msgid "SCSI controllers"
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \\\"%s\\\"\n"
-"if you have a working Internet connection, or \\\"%s\\\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \\\"%s\\\" will display a list of places from which updates can be\n"
-"retrieved. You should choose one nearer to you. A package-selection tree\n"
-"will appear: review the selection, and press \\\"%s\\\" to retrieve and install\n"
-"the selected package(s), or \\\"%s\\\" to abort."
+msgid " on LPD server \"%s\", printer \"%s\""
msgstr ""
#: ../../standalone/drakedm:1
@@ -14638,32 +14483,22 @@ msgstr ""
msgid "I can't find needed image file `%s'."
msgstr ""
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Shell"
+msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr ""
-#: ../../help.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \\\"%s\\\".\n"
-"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
-"this detection fails, uncheck the \\\"%s\\\" box. You may also choose not to\n"
-"configure the network, or to do it later, in which case clicking the \\\"%s\\\"\n"
-"button will take you to the next step.\n"
-"\n"
-"When configuring your network, the available connections options are:\n"
-"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
-"simple LAN connection (Ethernet).\n"
-"\n"
-"We will not detail each configuration option - just make sure that you have\n"
-"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
-"from your Internet Service Provider or system administrator.\n"
-"\n"
-"You can consult the ``Starter Guide'' chapter about Internet connections\n"
-"for details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection."
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
+msgstr ""
+
+#: ../../any.pm:1
+#, c-format
+msgid "Shell"
msgstr ""
#: ../../network/isdn.pm:1
@@ -14860,6 +14695,14 @@ msgid ""
"Printerdrake could not determine which model your printer %s is. Please choose the correct model from the list."
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
+msgstr ""
+
#: ../../printer/data.pm:1
#, c-format
msgid "PDQ"
@@ -14915,11 +14758,37 @@ msgstr ""
msgid "Panama"
msgstr ""
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid ""
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
+msgstr ""
+
#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
msgid "Monitor"
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"You are about to set up printing to a Windows account with password. Due to a fault in the architecture of the Samba client software the password is put in clear text into the command line of the Samba client used to transmit the print job to the Windows server. So it is possible for every user on this machine to display the password on the screen by issuing commands as \"ps auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases you have to make sure that only machines from your local network have access to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account or a special account dedicated for printing. Do not remove the password protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD protocol. Then set up printing from this machine with the \"%s\" connection type in Printerdrake.\n"
+"\n"
+""
+msgstr ""
+
#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "65 thousand colors (16 bits)"
@@ -15007,11 +14876,6 @@ msgstr ""
msgid "/File/_Save"
msgstr ""
-#: ../../network/network.pm:1
-#, c-format
-msgid "Rate should have the suffix k, M or G (for example, \\\"11M\\\" for 11M), or add enough '0' (zeroes)."
-msgstr ""
-
#: ../../lang.pm:1
#, c-format
msgid "Mali"
@@ -15054,6 +14918,11 @@ msgstr ""
msgid "Allow Thin Clients"
msgstr ""
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Georgian (\"Russian\" layout)"
+msgstr ""
+
#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
msgid "/_Options"
@@ -15164,6 +15033,16 @@ msgid ""
""
msgstr ""
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid ""
+"For this to work for a W2K PDC, you will probably need to have the admin run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are good."
+msgstr ""
+
#: ../../printer/main.pm:1
#, c-format
msgid "%s (Port %s)"
@@ -15182,6 +15061,59 @@ msgid ""
" Enable/Disable sulogin(8) in single user level."
msgstr ""
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
+
#: ../../any.pm:1 ../../help.pm:1
#, c-format
msgid "Accept user"
@@ -15224,6 +15156,11 @@ msgstr ""
msgid "Gateway address should be in format 1.2.3.4"
msgstr ""
+#: ../../network/modem.pm:1
+#, c-format
+msgid "\"%s\" based winmodem detected, do you want to install needed software ?"
+msgstr ""
+
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Looking at packages already installed..."
@@ -15309,6 +15246,11 @@ msgstr ""
msgid "Austria"
msgstr ""
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr ""
+
#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
msgid "Collapse Tree"
@@ -15329,6 +15271,34 @@ msgstr ""
msgid "Where do you want to install the bootloader?"
msgstr ""
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
+msgstr ""
+
#: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1
#, c-format
msgid "The %s is not supported by this version of Mandrake Linux."
@@ -15568,6 +15538,11 @@ msgstr ""
msgid "Configure X"
msgstr ""
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Turkish (traditional \"F\" model)"
+msgstr ""
+
#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1 ../../standalone/scannerdrake:1
#, c-format
msgid "Congratulations!"
@@ -15593,6 +15568,13 @@ msgstr ""
msgid "Install rpm"
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"To print a file from the command line (terminal window) you can either use the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or \"kprinter <file>\". The graphical tools allow you to choose the printer and to modify the option settings easily.\n"
+""
+msgstr ""
+
#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Time remaining "
@@ -15746,11 +15728,6 @@ msgid ""
""
msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid ", printer \\\"%s\\\" on server \\\"%s\\\""
-msgstr ""
-
#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Choose the packages you want to install"
@@ -15771,6 +15748,13 @@ msgstr ""
msgid "Make kernel message quiet by default"
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
+msgstr ""
+
#: ../../standalone/drakgw:1
#, c-format
msgid "The DHCP end range"
@@ -15813,6 +15797,11 @@ msgstr ""
msgid "dismiss"
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing/Scanning on \"%s\""
+msgstr ""
+
#: ../../standalone/drakfloppy:1
#, c-format
msgid "omit raid modules"
@@ -15835,6 +15824,11 @@ msgstr ""
msgid "comma separated numbers"
msgstr ""
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Once you've selected a device, you'll be able to see the device information in fields displayed on the right frame (\"Information\")"
+msgstr ""
+
#: ../../standalone/drakperm:1
#, c-format
msgid "Move selected rule up one level"
@@ -15850,6 +15844,11 @@ msgid ""
""
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr ""
+
#: ../../install_interactive.pm:1
#, c-format
msgid "I can't find any room for installing"
@@ -15896,19 +15895,6 @@ msgstr ""
msgid "Liberia"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP protocol and set up printing from this machine with the \\\"%s\\\" connection type in Printerdrake.\n"
-"\n"
-""
-msgstr ""
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Georgian (\\\"Latin\\\" layout)"
-msgstr ""
-
#: ../../standalone/drakgw:1
#, c-format
msgid ""
@@ -15936,6 +15922,11 @@ msgstr ""
msgid "Automatic correction of CUPS configuration"
msgstr ""
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Running \"%s\" ..."
+msgstr ""
+
#: ../../harddrake/v4l.pm:1
#, c-format
msgid "enable radio support"
@@ -16065,6 +16056,15 @@ msgstr ""
msgid "No image found"
msgstr ""
+#: ../../install_steps.pm:1
+#, c-format
+msgid ""
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
+""
+msgstr ""
+
#: ../../standalone/scannerdrake:1
#, c-format
msgid "Detected model: %s"
diff --git a/perl-install/share/po/af.po b/perl-install/share/po/af.po
index 3906813e8..0dd888b07 100644
--- a/perl-install/share/po/af.po
+++ b/perl-install/share/po/af.po
@@ -7,7 +7,7 @@
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
"PO-Revision-Date: 2001-08-20 21:28-0000\n"
"Last-Translator: Schalk W. Cronjé <schalkc@uk.ntaba.com>\n"
"Language-Team: Afrikaans <mandrake@af.org.za>\n"
@@ -15,2157 +15,1244 @@ msgstr ""
"Content-Type: text/plain; charset=iso-8859-1\n"
"Content-Transfer-Encoding: 8bit\n"
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
-msgstr ""
-
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid "Cancel"
-msgstr "Kanselleer"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
+msgid "Scanning partitions to find mount points"
+msgstr "Hegpunte vir partisies word nou gesoek"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Mandatory package %s is missing"
+msgid "if set to yes, check additions/removals of suid root files."
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
-msgstr ""
-
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
+msgid "\t\tErase=%s"
msgstr ""
-"Hierdie pakket moet opgradeer word\n"
-"Is u seker u wil dit deselekteer?"
#
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
-#, c-format
-msgid "Custom"
-msgstr "Aangepaste"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Allow all users"
-msgstr "Voeg 'n gebruiker by"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "No sharing"
-msgstr "CUPS word gelaai"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "More"
-msgstr "Nog"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Here is the full list of available countries"
-msgstr "Hierdie is die volledige lys van beskikbare sleutelborde"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Please choose your country."
-msgstr "Wat is u muistoestel?"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid " / Region"
-msgstr "Resolusie"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Country"
-msgstr "Heg"
+msgid "network printer port"
+msgstr "Netwerkdrukker (sok)"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "All languages"
-msgstr "Kies u taal"
+msgid "Please insert floppy disk:"
+msgstr "Sit 'n herlaaiskyf wat gebruik is, in aandrywer %s"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use Unicode by default"
-msgstr ""
+msgid "PCMCIA"
+msgstr "PCMCIA"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr "U kan ander tale selekteer wat na installasie beskikbaar sal wees."
+"The backup partition table has not the same size\n"
+"Still continue?"
+msgstr ""
+"Die rugsteunpartisietabel het nie dieselfde grootte nie\n"
+"Wil u voortgaan?"
-#: ../../any.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, fuzzy, c-format
-msgid "Please choose a language to use."
-msgstr "Kies asb. 'n taal om te gebruik."
-
-#
-#: ../../any.pm:1
-#, c-format
-msgid "Choose the window manager to run:"
-msgstr "Kies die vensterbestuurder om te loop:"
+msgid "Which username"
+msgstr "Gebruikerskode"
#: ../../any.pm:1
#, c-format
-msgid "Choose the default user:"
-msgstr "Kies die verstek gebruiker:"
+msgid "Which type of entry do you want to add?"
+msgstr "Watter tipe inskrywing wil u byvoeg?"
-#: ../../any.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Do you want to use this feature?"
-msgstr "Wil u aboot gebruik?"
+msgid "Restore partition table"
+msgstr "Reddingspartisietabel"
-#: ../../any.pm:1
+#: ../../printer/cups.pm:1
#, fuzzy, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr ""
-"Ek kan u rekenaar so opstel om X outomaties een gebruiker in te teken.\n"
-"Verlang u hierdie funksionaliteit?"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Autologin"
-msgstr "Outointeken"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Icon"
-msgstr "Ikoon"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Shell"
-msgstr "Dop"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Password (again)"
-msgstr "Wagwoord (weer)"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Password"
-msgstr "Wagwoord"
-
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "User name"
-msgstr "Gebruikerskode"
+msgid "On CUPS server \"%s\""
+msgstr "CUPS-bediener IP:"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Real name"
-msgstr "Regte naam"
+msgid "Post-install configuration"
+msgstr "Postinstallasiekonfigurasie"
-#: ../../any.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Accept user"
-msgstr "Aanvaar gebruiker"
+msgid "Use ``%s'' instead"
+msgstr "Gebruik ``%s'' instede."
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Done"
-msgstr "Klaar"
+msgid "Type"
+msgstr "Tipe"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Enter a user\n"
-"%s"
+"\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
msgstr ""
-"Tik 'n gebruiker in\n"
-"%s"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Add user"
-msgstr "Voeg gebruiker by"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This user name has already been added"
-msgstr "Hierdie genruikerskode bestaan alreeds"
+msgid "Sri Lanka"
+msgstr ""
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "The user name is too long"
-msgstr "Hierdie genruikerskode bestaan alreeds"
-
-#: ../../any.pm:1
-#, c-format
msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Die gebruikerskode maag alleenlikui kleinletter, nommers, '-' en '_' bestaan"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Please give a user name"
-msgstr "Gee asb. 'n gebruikerskode"
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This password is too simple"
-msgstr "Die wagwoorde is te eenvoudig"
+msgid "Central African Republic"
+msgstr ""
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Please try again"
-msgstr "Probeer asb. weer"
+msgid "Gateway device"
+msgstr "Netwerkportaaltoestel"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The passwords do not match"
-msgstr "Die wagwoorde stem nie ooreen nie."
+msgid "Net Method:"
+msgstr ""
-#: ../../any.pm:1
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s alreeds bygevoeg)"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Ethernetcard"
+msgstr "Ethernetkaart"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "access to compilation tools"
-msgstr ""
+msgid "Parameters"
+msgstr "Parameters"
-#: ../../any.pm:1
-#, c-format
-msgid "access to network tools"
-msgstr ""
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "Auto-detect"
+msgstr "Gebruik outobespeuring"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "access to administrative files"
-msgstr ""
+msgid "Interface:"
+msgstr "Koppelvlak:"
-#: ../../any.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "allow \"su\""
-msgstr ""
+msgid "Select installation class"
+msgstr "Kies installasieklas"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "access to rpm tools"
+msgid "on CDROM"
msgstr ""
-#: ../../any.pm:1
-#, c-format
-msgid "access to X programs"
+#: ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid ""
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
msgstr ""
+"Die tselsel blyk nie aan die internet gekonnekteer te wees nie.\n"
+"Probeer om u stelsel te herkonfigureer."
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
msgstr ""
-"Hier is die huidige inskrywings\n"
-"U kan byvoeg or verwyder soos nodig."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Other OS (windows...)"
-msgstr "Ander bedryfstelsel (windows...)"
-#: ../../any.pm:1
-#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Ander bedryfstelsel (MacOS...)"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Belarus"
+msgstr "Belarussies"
-#: ../../any.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Ander bedryfstelsel (SunOS...)"
+msgid "Error writing to file %s"
+msgstr "Fout in die skryf van %s"
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Linux"
-msgstr "Linux"
+msgid ""
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
+msgstr ""
+"apmd word gebruik om battery status te monitor en dit dan te log via "
+"syslog.\n"
+"Dit kan ook gebruik word om die rekenaar af te bring wanneer die battery "
+"swak is."
-#: ../../any.pm:1
-#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Watter tipe inskrywing wil u byvoeg?"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use tape to backup"
+msgstr "Korrupte rugsteunlêer"
-#: ../../any.pm:1
+#
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "This label is already used"
-msgstr "Hierdie etiket is alreeds in gebruik"
+msgid "The following packages are going to be installed"
+msgstr "Die volgende pakkette gaan installeer word"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "You must specify a root partition"
-msgstr "U moet oor 'n ruilpartisie beskik"
+msgid "CUPS configuration"
+msgstr "Konfigurasie"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You must specify a kernel image"
+msgid "Hong Kong"
msgstr ""
-#: ../../any.pm:1
-#, c-format
-msgid "Empty label not allowed"
-msgstr "Leë etiket word nie toegelaat nie"
-
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Default"
-msgstr "Verstek"
-
-#: ../../any.pm:1
-#, c-format
-msgid "NoVideo"
-msgstr "Geen video"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Initrd-size"
-msgstr "Initrd-grootte"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Append"
-msgstr "Aanlas"
-
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Label"
-msgstr "Etiket"
+msgid "Not enough free space to allocate new partitions"
+msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Unsafe"
-msgstr "Onveilig"
+msgid "Moving"
+msgstr "Verskuiwing"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Table"
-msgstr "Tabel"
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Root"
-msgstr "Basis"
+msgid "("
+msgstr ""
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Read-write"
-msgstr "Lees-skryf"
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgstr ""
+"Welkom by die Netwerkkonfigurasie-assistent\n"
+"\n"
+"Ons gaan nou u internet/netwerkkonneksie konfigureer.\n"
+"Iniden u nie outobespeuring verlang nie, deselekteer die opsie.\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid ")"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Video mode"
-msgstr "Videomodus"
+msgid "Lebanon"
+msgstr ""
-#: ../../any.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Image"
-msgstr "Beeld"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
-#: ../../any.pm:1
-#, c-format
-msgid "Default OS?"
-msgstr "Verstek bedryfstelsel?"
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Stop"
+msgstr "Sektor"
-#: ../../any.pm:1
-#, c-format
-msgid "Enable OF Boot?"
-msgstr "Laat OF-herlaai toe?"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Edit selected host"
+msgstr "%s bespeur"
-#: ../../any.pm:1
-#, c-format
-msgid "Enable CD Boot?"
-msgstr "Laat CD-herlaai toe?"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "No CD device defined!"
+msgstr "Selekteer lOer"
-#: ../../any.pm:1
-#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Tydsbeperking vir stelselkernlaai"
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Bulgarian (phonetic)"
+msgstr "Armenies (Foneties)"
-#: ../../any.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Open Firmware Delay"
+msgid "The DHCP start ip"
msgstr ""
-#: ../../any.pm:1
-#, c-format
-msgid "Boot device"
-msgstr "Herlaaitoestel"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Init Message"
-msgstr "Beginboodskap"
-
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Bootloader to use"
-msgstr "Herlaaistelsel om te gebruik"
+msgid "256 kB"
+msgstr "256 kB"
#: ../../any.pm:1
#, c-format
msgid "Bootloader main options"
msgstr "Herlaaistelsel hoofopsies"
-#: ../../any.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Opsie ``Beperk instruksielynopsies'' kan nie sonder wagwoord gebruikword nie"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Give the ram size in MB"
-msgstr "Gee die geheuegrootte in MB"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Enable multiple profiles"
-msgstr "Gebruik multiprofiele"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Presiese RAM grootte indien nodig (%d MB bespeur)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Maak /tmp skoon met elke herlaai"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Create a bootdisk"
-msgstr "Maar 'n herlaaiskyf"
-
-#: ../../any.pm:1
-#, c-format
-msgid "restrict"
-msgstr "beperk"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Restrict command line options"
-msgstr "Beperk instruksielynopsies"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Force No APIC"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
msgstr ""
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Enable ACPI"
-msgstr "Laat CD-herlaai toe?"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Delay before booting default image"
-msgstr "Wagperiode voro verstekstelsel gelaai word"
-
-#: ../../any.pm:1
-#, c-format
-msgid "compact"
-msgstr "kompak"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Compact"
-msgstr "Kompak"
+msgid "Tape"
+msgstr "Tipe"
-#: ../../any.pm:1
-#, c-format
-msgid "Bootloader installation"
-msgstr "Herlaaiprogram installasie"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Scanning network..."
+msgstr "Konneksie word begin..."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "First sector of boot partition"
-msgstr "Eerste sektor van herlaaipartisie"
+msgid ""
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Eerste sektor van skyf (MBR)"
+msgid "Malaysia"
+msgstr ""
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Waar wil u die herlaaistelsel installeer"
+msgid "Swiss (French layout)"
+msgstr "Switsers (Franse uitleg)"
-#: ../../any.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "LILO/grub Installation"
-msgstr "LILO/grub installasie"
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "mkraid het gefaal. Dalk is 'raidtools' nie beskikbaar nie."
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "SILO Installation"
-msgstr "SILO installasie"
+msgid "Webcam"
+msgstr ""
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Skip"
-msgstr "Mis hierdie stap"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "On Floppy"
-msgstr "Stoor op floppie"
+msgid "size of the (second level) cpu cache"
+msgstr ""
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "First sector of the root partition"
-msgstr "Eerste sektor van herlaaipartisie"
+msgid "Soundcard"
+msgstr "Klankkaart"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
msgstr ""
-#: ../../any.pm:1
-#, c-format
-msgid "Creating bootdisk..."
-msgstr "Herlaaiskyf word geskryf"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Sit 'n skyf in aandrywer %s"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Kies die sagteskyfaandrywer wat u wil gebruik"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Second floppy drive"
-msgstr "Tweede sagteskyfaandrywer"
-
-#: ../../any.pm:1
-#, c-format
-msgid "First floppy drive"
-msgstr "Eerste sagteskyfaandrywer"
-
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "Jammer, geen sagteskyfaandrywer beskikbaar nie"
+msgid "Level %s\n"
+msgstr "Vlak %s\n"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
+msgid "Luxembourg"
msgstr ""
-"'n Spesiale herlaaiskyf voorsien ;n metode waarby u Linux kan laai sonder\n"
-"die gebruik van 'n normale herlaaistelsel. Dit is veral bruikbaar wanneer\n"
-"u nie LILO (of Grub) op u stelsel wil installeer nie, 'n ander bedryfstelsel "
-"LILO\n"
-"verwyder of LILO nie met u stelsel werk nie. Hierdie herlaaiskyf kan ook\n"
-"met die Mandrake reddingsbeeld gebruik word, wat dit makliker maak om van\n"
-"ernstige stelselfalings te herstel. Wil u 'n herlaaiskyf maak?\n"
-"%s"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
+" DrakBackup Daemon Report\n"
"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
msgstr ""
-"'n Spesiale herlaaiskyf voorsien ;n metode waarby u Linux kan laai sonder\n"
-"die gebruik van 'n normale herlaaistelsel. Dit is veral bruikbaar wanneer\n"
-"u nie SILO op u stelsel wil installeer nie, 'n ander bedryfstelsel SILO\n"
-"verwyder of SILO nie met u stelsel werk nie. Hierdie herlaaiskyf kan ook\n"
-"met die Mandrake reddingsbeeld gebruik word, wat dit makliker maak om van\n"
-"ernstige stelselfalings te herstel.\n"
-"\n"
-"Indien u 'n herlaaiskyf wil maak,\n"
-"plaas 'n skyf in die aandrywer en druk \"OK\"."
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Waar wil u die herlaaistelsel installeer"
+msgid "Iran"
+msgstr "Iranies"
-#: ../../bootloader.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "not enough room in /boot"
-msgstr "nie genoeg spasie in /boot nie"
+msgid "Bus"
+msgstr ""
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Die uitgeligte inskrywing sal outomaties in %ds gelaai word."
+msgid "Iraq"
+msgstr ""
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "instruksies voor herlaai, of 'c' vir 'n instruksielyn."
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr "Moontlike LAN-adresbotsing gevind in konfigurasie %s!\n"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Druk ENTER om die gekose bedryfstelsel te laai, 'e' om te redigeer."
+msgid "Configuring..."
+msgstr "Konfigurasie in aabou..."
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr ""
-"Gebruik die %c en %c sleutels om die inskrywing te kies wat uitgelig moet "
-"word."
+msgid "The setup has already been done, and it's currently enabled."
+msgstr "Die opstelling is alreeds gedoen en is alreeds ook geaktiveer."
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welkom by GRUB, die bedryfstelselkieskaart!"
+msgid ""
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
+msgstr ""
-#: ../../bootloader.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Password (again)"
+msgstr "Wagwoord (weer)"
-#: ../../bootloader.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Grub"
-msgstr "Grub"
+msgid "Search installed fonts"
+msgstr ""
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with text menu"
-msgstr "LILO met tekskieskaart"
+msgid "Venezuela"
+msgstr ""
-#: ../../bootloader.pm:1
+#
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO met grafiese kieskaart"
+msgid "IP address"
+msgstr "IP adres"
-#: ../../bootloader.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Choose the sizes"
+msgstr "Kies die groottes"
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"List of data corrupted:\n"
"\n"
msgstr ""
-"Welkom by %s die bedryfstelselkeuseprogram!\n"
-"\n"
-"Kies u bedryfstelsel uit die bogelyste opsies of wag\n"
-"%d sekonde vir die verstekopsie.\n"
-"\n"
-#: ../../common.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "consolehelper missing"
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
msgstr ""
-#: ../../common.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "kdesu missing"
-msgstr "kdesu is weg"
+msgid "Choose another partition"
+msgstr "Kies 'n ander partisie"
-#: ../../common.pm:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "U kan ander tale selekteer wat na installasie beskikbaar sal wees."
+msgid "Current user"
+msgstr "Aanvaar gebruiker"
-#: ../../common.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "Ek kan nie meer partisies byvoeg nie"
-
-#: ../../common.pm:1
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekondes"
-
-#: ../../common.pm:1
-#, c-format
-msgid "1 minute"
-msgstr "1 minuut"
-
-#: ../../common.pm:1
-#, c-format
-msgid "%d minutes"
-msgstr "%d minute"
-
-#: ../../common.pm:1
-#, c-format
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm:1
-#, c-format
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm:1
-#, c-format
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm:1
-#, c-format
-msgid "KB"
-msgstr "KB"
+msgid "Username"
+msgstr "Gebruikerskode"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "United States"
+msgid "Left \"Windows\" key"
msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Austria"
-msgstr "seriaal"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Italy"
-msgstr "Italiaans"
+msgid "dhcpd Server Configuration"
+msgstr "Sluit konfigurasie af"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Netherlands"
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Sweden"
-msgstr "Sien"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Norway"
-msgstr "Norweegs"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Greece"
-msgstr "Grieks"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Germany"
-msgstr "Duitsland"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Czech Republic"
+msgid "Guyana"
msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid "Belgium"
-msgstr "Belgies"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "France"
-msgstr "Frankryk"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Costa Rica"
+msgid " on Novell server \"%s\", printer \"%s\""
msgstr ""
-#: ../../fsedit.pm:1
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Four om %s in skryfmode te open: %s"
-
-#: ../../fsedit.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "U kan nie LVM logiese volume vir hegpunt %s gebruik nie."
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr "U benodig 'n ware lêerstelsel (ext2, reiserfs) vir hierdie hegpunt\n"
+msgid "Remove a module"
+msgstr "Verwyder module"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Hierdie lêergids moet altyd in die wortellêerstelsel bly"
+msgid "Password"
+msgstr "Wagwoord"
-#: ../../fsedit.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "U kan nie LVM logiese volume vir hegpunt %s gebruik nie."
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
msgstr ""
-"U het 'n sagteware RAID-partisie as wortel (/).\n"
-"Geen herlaaistelsel sal dit kan hanteer sonder 'n /boot partisie nie.\n"
-"Onthou om 'n /boot by te voeg."
-#: ../../fsedit.pm:1
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Daar is alreeds 'n partisie met hegpunt %s\n"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Advanced Configuration"
+msgstr "Sluit konfigurasie af"
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mount points should contain only alphanumerical characters"
+msgid "Scanning on your HP multi-function device"
msgstr ""
-#: ../../fsedit.pm:1
-#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Hegpunte moet met 'n / begin"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "U kan nie ReiserFS vir partisies kleiner as 32MB gebruik nie"
-
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "U kan nie JFS vir partisies kleiner as 16MB gebruik nie"
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid ""
-"I can't read the partition table of device %s, it's too corrupted for me :(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Ek kan nie u partisietabel lees nie, dit is te korrup.\n"
-"Ek sal die nodige partisies skoonmaak, maar alle data sal vernietig word.\n"
-"Die ander opsie is om DrakX te belet om die partisietabel te verander.\n"
-"(fout is %s)\n"
-"\n"
-"Will u al die partisies verwyder?\n"
+msgid "Root"
+msgstr "Basis"
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Error"
-msgstr "Fout"
+msgid "Choose an existing RAID to add to"
+msgstr "Kies 'n bestaande RAID om by toe te voeg"
-#: ../../fsedit.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "server"
-msgstr "bediener"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "Turks (moderne \"Q\" modem)"
-#: ../../fsedit.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "with /usr"
+msgid "Lilo message not found"
msgstr ""
-#: ../../fsedit.pm:1
-#, c-format
-msgid "simple"
-msgstr "eenvoudig"
-
-#: ../../fs.pm:1
-#, fuzzy, c-format
-msgid "Enabling swap partition %s"
-msgstr "Partisie %s word formateer"
-
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "error unmounting %s: %s"
-msgstr "fout met onthegting van %s: %s"
+msgid ""
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
+msgstr ""
-#: ../../fs.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
+msgid "if needed"
+msgstr "indien nodig"
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Mounting partition %s"
-msgstr "Partisie %s word formateer"
+msgid "Restore Failed..."
+msgstr "Herstel vanaf lêer"
-#: ../../fs.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Checking %s"
-msgstr "LPD word verwyder..."
-
-#: ../../fs.pm:1
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Partisie %s word formateer"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Lêer %s word geskep en formatteer"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Ek weet nie om %s as tipe %s te formateer nie"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatering ban %s het gefaal"
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
+msgid "/Autodetect _jazz drives"
+msgstr "Gebruik outobespeuring"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
+"Description:\n"
"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
-msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
msgstr ""
-#: ../../help.pm:1
+#: ../../install_messages.pm:1
#, c-format
msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
+"Introduction\n"
"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
+"1. License Agreement\n"
"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
+"2. Limited Warranty\n"
"\n"
-"For Linux, there are a few possible options:\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
+"3. The GPL License and Related Licenses\n"
"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
+"4. Intellectual Property Rights\n"
"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
+"5. Governing Laws \n"
"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
+#, c-format
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
+msgstr ""
+
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
+msgid "Current interface configuration"
+msgstr "Verander drukkerkonfigurasie"
+
+#: ../../printer/data.pm:1
+#, c-format
+msgid "LPD - Line Printer Daemon"
+msgstr "LPD - Lyndrukkerdiensprogram"
+
+#: ../../network/isdn.pm:1
+#, c-format
msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
msgstr ""
-"DrakX sal probeer om vir PCI SCSI-kaarte te soek.\n"
-"Indien DrakX 'n SCSI-kaart bespeur en weet watter drywer omte gebruik sal "
-"dit outomaties installeer word.\n"
"\n"
-"Indien u nie oor 'n SCSI-kaart, beskik nie of oor 'n ISA SCSI-kaart of 'n "
-"PCI SCSI-kaart beskik wat DrakX nie kan herken nie, sal u gevra word of daar "
-"enige SCSI-kaarte in diestelsel is. Indien daar geen is nie kliek op 'Nee', "
-"andersins op 'Ja'. U sal dan uit'n drywerlys kan kies.\n"
-"\n"
-"\n"
-"Indien u self 'n drywer moes spesifiseer, sal DrakX u ook vra vir enige "
-"spesifiekeopsies.\n"
-"U kan egter DrakX toelaat om self die hardeware te ondervra. DIt werk "
-"gewoonlik die beste.\n"
+"Indien u 'n ISA-kaart het, behoort die waardes op die volgende skerm reg te "
+"wees.\n"
"\n"
-"Lees die installasie inligting hoe om hierdie tipe inligting m.b.v. die "
-"Windows-bedryfstelsel te bekom.\n"
-"U kan dit ook vanaf die internet onttrek indien u sulke toegang het."
+"Indien u 'n PCMCIA kaart het, moet u die IRQ en I/O van u kaart weet.\n"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Do not print any test page"
+msgstr "Druk toetsbladsy(e)"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
-"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
+msgid "Gurmukhi"
msgstr ""
-#: ../../help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
+msgid "Force No APIC"
msgstr ""
-#: ../../help.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr ""
+"Hierdie wagwoord is te eenvoudig. Dit moet ten minste %d karakters bevat."
+
+#: ../../standalone.pm:1
+#, fuzzy, c-format
+msgid "[keyboard]"
+msgstr "Sleutelbord"
+
+#: ../../network/network.pm:1
+#, c-format
+msgid "FTP proxy"
+msgstr "FTP instaanbediener"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Install List"
+msgstr "Installeer stelsel"
+
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
+"Change\n"
+"Restore Path"
+msgstr "Herstel vanaf lêer"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Show only for the selected day"
msgstr ""
-"LILO (Die LInux LOader) en Grub is herlaaistelsels. Beide kan GNU/Linux of "
-"enige ander\n"
-"bedryfstelsel wat op u rekenar teenwoordig is, laai. Gewoonlik word hierdie\n"
-"beryfstelsels reg bespeur en bygevoeg. Indien nie, kan u 'n inskrywing maak\n"
-"op hierdie skerm. Maak seker u kies die korrekte paramters.\n"
-"\n"
-"\n"
-"U mag dalk toegang tot ander bedryfstelsels beperk, in welke geval u die "
-"nodige\n"
-"inskrywings kan uitvee. Maar dan het u die nodige herlaaiskywe nodig om die\n"
-"betrokke bedryfstelsels te laai."
-#: ../../help.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"This dialog allows to finely tune your bootloader:\n"
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
msgstr ""
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
-msgstr ""
+msgid "512 kB"
+msgstr "512 kB"
-#: ../../help.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
+msgid "Logs"
msgstr ""
-"Kies asb. die korrekte poort. Onthou dat COM1 onder MS Windows \n"
-"ttyS0 onder GNU/Linux is."
-#: ../../help.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
+msgid "(Note: Parallel ports cannot be auto-detected)"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
-msgstr ""
+msgid "<control>N"
+msgstr "<control>N"
-#: ../../help.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
+msgid "What kind of card do you have?"
+msgstr "Oor watter tipe kaart beskik u?"
-#: ../../help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
+msgid "<control>O"
+msgstr "<control>O"
-#: ../../help.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
+msgid "Security"
+msgstr "Sekuriteit"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
+msgid "<control>Q"
+msgstr "<control>Q"
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Unknown"
+msgstr "Onbekende model"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
+msgid "This server is already in the list, it cannot be added again.\n"
msgstr ""
-#: ../../help.pm:1
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
#, c-format
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
-msgstr ""
+msgid "Network Configuration"
+msgstr "Netwerkkonfigurasie"
-#: ../../help.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>S"
+msgstr "<control>S"
+
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
msgstr ""
+"Protokol vir die res vd wêreld \n"
+" geen D-Kanaal nie (bruikhuurlyne)"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s must be a number!"
+msgstr "Opsie %s moet 'n nommer wees"
+
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "Notice"
+msgstr "Geen video"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
+"Arguments: (arg)\n"
"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
+" Activate/Disable daily security check."
msgstr ""
-#: ../../help.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"At this point, you need to decide where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space you will\n"
-"have to partition the drive. Basically, partitioning a hard drive consists\n"
-"of logically dividing it to create the space needed to install your new\n"
-"Mandrake Linux system.\n"
-"\n"
-"Because the process of partitioning a hard drive is usually irreversible\n"
-"and can lead to lost data if there is an existing operating system already\n"
-"installed on the drive, partitioning can be intimidating and stressful if\n"
-"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
-"simplifies this process. Before continuing with this step, read through the\n"
-"rest of this section and above all, take your time.\n"
-"\n"
-"Depending on your hard drive configuration, several options are available:\n"
-"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
-"\n"
-" Before choosing this option, please understand that after this\n"
-"procedure, the size of your Microsoft Windows partition will be smaller\n"
-"then when you started. You will have less free space under Microsoft\n"
-"Windows to store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
-"\n"
-" !! If you choose this option, all data on your disk will be deleted. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
+"Arguments: (arg)\n"
"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
msgstr ""
-#: ../../help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
+msgid "You have not configured X. Are you sure you really want this?"
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
msgstr ""
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
-msgstr ""
+msgid "What type of partitioning?"
+msgstr "Watter tipe van partisionering?"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
+"file list sent by FTP: %s\n"
+" "
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Interface"
+msgstr "Koppelvlak"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
+"Options Description:\n"
"\n"
+" - Backup System Files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
"\n"
+" - Backup User Files: \n"
"\n"
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
-"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
"\n"
-"Test\n"
-"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+" - Backup Other Files: \n"
"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane. To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
-"Options\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
-" You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
msgstr ""
-#: ../../help.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
msgstr ""
-#: ../../help.pm:1
+#: ../../modules/parameters.pm:1
+#, fuzzy, c-format
+msgid "comma separated strings"
+msgstr "Formateer partisies"
+
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
+msgid "These are the machines from which the scanners should be used:"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"U kan nou dienste kies wat by herlaaityd moet afskop.\n"
-"Wanneer u die muis oor 'n item beweeg, sal 'n klein ballon opspring\n"
-"wat die rol van die diens verduidelik.\n"
-"\n"
-"Wees versigtig met hierdie stap. Indien u beplan om dié rekenaar as 'n\n"
-"bediener te gebruik wil u nie dienste afskop wat u nie gaan gebruik nie."
+msgid "Messages"
+msgstr "Beginboodskap"
-#: ../../help.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
+msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr ""
-#: ../../help.pm:1
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "POP and IMAP Server"
+msgstr "LDAP-bediener"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Mexico"
+msgstr "Muis"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model stepping"
+msgstr "Formatering"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
-"\n"
-"When configuring your network, the available connections options are:\n"
-"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
-"simple LAN connection (Ethernet).\n"
-"\n"
-"We will not detail each configuration option - just make sure that you have\n"
-"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
-"from your Internet Service Provider or system administrator.\n"
-"\n"
-"You can consult the ``Starter Guide'' chapter about Internet connections\n"
-"for details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection."
+msgid "Rwanda"
msgstr ""
-#: ../../help.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
+msgid "Do you have any %s interfaces?"
+msgstr "Het u enige %s koppelvlakke?"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
+msgid "Switzerland"
msgstr ""
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
+msgid "Brunei Darussalam"
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
+msgid "Remote lpd Printer Options"
+msgstr "Eksterne lpd drukkeropsies"
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
"system administrator, the users you add at this point will not be\n"
"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
"that can automatically log into the system when the computer boots up. If\n"
"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
msgstr ""
"GNU/Linux is 'n multigebruikerstelsel en dit beteken dat elke gebruiker sy "
"eie\n"
@@ -2208,4024 +1295,4516 @@ msgstr ""
"gebruiker wil verander.\n"
"Dit is bash by verstek."
-#: ../../help.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Configure Internet Access..."
+msgstr "Konfigureer internettoegang..."
+
+#: ../../crypto.pm:1 ../../lang.pm:1
#, fuzzy, c-format
+msgid "Norway"
+msgstr "Norweegs"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Danish"
+msgstr "Deens"
+
+#: ../../services.pm:1
+#, c-format
msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
msgstr ""
-"Voordat u voortgaan, lees asb die lisensieterme noukeurig deur. Dit dek\n"
-"die hele Mandrake Lnux distirbusie, and indien u nie saamstem met al die\n"
-"terme daarin bevat nie, kliek om die Weier knoppie. Dit sal onmiddelik die\n"
-"installasie stop sit. Om met die installasie voort te gaan kliek op die "
-"Aanvaar\n"
-"knoppie."
-#: ../../install2.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "You must also format %s"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
msgstr ""
+"Gee asb die IP-konfigurasie vir hierdie rekenaar.\n"
+"Elke item moet as 'n IP-adres in dotdesimalenotasie\n"
+"(1.2.3.4) gegee word."
-#: ../../install2.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
msgstr ""
-#: ../../install_any.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
+msgid "Processors"
msgstr ""
-"'n Fout het voorgekom - geen geldige toestelle om die nuwe lêerstelsels op "
-"te skep, is gevind nie. Deursoek asb. die hardeware vir die oorsaak."
-#: ../../install_any.pm:1 ../../partition_table.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Bulgaria"
+msgstr "Hongaars"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "No NIC selected!"
+msgstr "Nie gekonnekteer nieKabelkonneksie"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Error reading file %s"
-msgstr "Fout met die les van lêer %s"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr ""
-#: ../../install_any.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
msgstr ""
-"Om hierdie gestoorde pakketkeuse te gebruik, herlaai die installasie met "
-"\"linux defcfg=floppy\""
-#: ../../install_any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "Hierdie floppie is nie in FAT-formaat nie"
+msgid "partition %s is now known as %s"
+msgstr ""
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup Other files..."
+msgstr "Korrupte rugsteunlêer"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Sit 'n FAT-geformatteerde skyf in aandrywer %s"
+msgid "SMB server IP"
+msgstr "SMB-bediener IP:"
-#: ../../install_any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Kan nie uitsaau sonder 'n NIS-domein nie"
+msgid "Congo (Kinshasa)"
+msgstr ""
-#: ../../install_any.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "Partisietabel van skyf %s gaan opdateer word!"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing HPOJ package..."
+msgstr "Installeer pakket %s"
+
+#: ../../any.pm:1
#, c-format
msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
msgstr ""
+"'n Spesiale herlaaiskyf voorsien ;n metode waarby u Linux kan laai sonder\n"
+"die gebruik van 'n normale herlaaistelsel. Dit is veral bruikbaar wanneer\n"
+"u nie LILO (of Grub) op u stelsel wil installeer nie, 'n ander bedryfstelsel "
+"LILO\n"
+"verwyder of LILO nie met u stelsel werk nie. Hierdie herlaaiskyf kan ook\n"
+"met die Mandrake reddingsbeeld gebruik word, wat dit makliker maak om van\n"
+"ernstige stelselfalings te herstel. Wil u 'n herlaaiskyf maak?\n"
+"%s"
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "No"
-msgstr "Nee"
+msgid ", USB printer \\#%s"
+msgstr ""
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Yes"
-msgstr "Ja"
+msgid "Latvian"
+msgstr "Latvies"
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
+msgid "monthly"
msgstr ""
-#: ../../install_gtk.pm:1
-#, fuzzy, c-format
-msgid "System configuration"
-msgstr "Kleurkonfigurasie"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "Module name"
+msgstr "Modulenaam"
-#: ../../install_gtk.pm:1
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "System installation"
-msgstr "SILO installasie"
+msgid "Start at boot"
+msgstr "Gelaai tydens herlaaityd"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bringing down the network"
-msgstr "Netwerk op pad af"
+msgid "Use Incremental Backups"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Bringing up the network"
-msgstr "Netwerk op pad op"
+msgid "First sector of drive (MBR)"
+msgstr "Eerste sektor van skyf (MBR)"
-#: ../../install_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partisionering het misluk: %s"
+msgid "Joystick"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Die DrakX partisioneringsassistent het die volgende oplossings:"
+msgid "El Salvador"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "I can't find any room for installing"
-msgstr "Ek kon geen plek vir installasie vind nie."
+msgid "Use Unicode by default"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+msgid "the module of the GNU/Linux kernel that handles the device"
msgstr ""
-"U het nou partisie %s partisioneer.\n"
-"Wanneer u klaar is, stoor u veranderinge met 'w'."
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Use fdisk"
-msgstr "Gebruik fdisk"
+msgid "Trying to rescue partition table"
+msgstr "Partisietabel Reddingspoging"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Custom disk partitioning"
-msgstr "Gespesialiseerde skyfpartisionering"
+msgid "Option %s must be an integer number!"
+msgstr "Opsie %s moet 'n heeltal wees!"
-#: ../../install_interactive.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Alle bestaande partisies en data sal uitgewis word op skyf %s"
+msgid ""
+"Entries you'll have to fill:\n"
+"%s"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "U het meer as een hardeskyf, waar wil u Linux installeer?"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "Kon nie die intydse opgradering begin nie !!!\n"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Erase entire disk"
-msgstr "Wis hele skyf"
+msgid "Name: "
+msgstr "Naam: "
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Verwyder Windows(TM)"
+msgid "16 million colors (24 bits)"
+msgstr "16-miljoen kleure (24 bis)"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
+msgid "Allow all users"
+msgstr "Voeg 'n gebruiker by"
+
+#: ../../share/advertising/08-store.pl:1
+#, c-format
+msgid "The official MandrakeSoft Store"
msgstr ""
-"Daar is geen FAT partisies om te verander of om as teruglus (nie genoeg "
-"spasie nie) te gebruik nie"
#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
+msgid "Resizing"
+msgstr "Grootteverandering"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Cable connection"
+msgstr "Kabelkonneksie"
+
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "User"
+msgstr "Gebruikerskode"
+
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"I can't read the partition table of device %s, it's too corrupted for me :(\n"
+"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
+"The other solution is to not allow DrakX to modify the partition table.\n"
+"(the error is %s)\n"
+"\n"
+"Do you agree to loose all the partitions?\n"
msgstr ""
+"Ek kan nie u partisietabel lees nie, dit is te korrup.\n"
+"Ek sal die nodige partisies skoonmaak, maar alle data sal vernietig word.\n"
+"Die ander opsie is om DrakX te belet om die partisietabel te verander.\n"
+"(fout is %s)\n"
+"\n"
+"Will u al die partisies verwyder?\n"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT-grootteverandering het gefaal: %s"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer on parallel port \\#%s"
+msgstr "Drukkerbedienernaam"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Name"
+msgstr "Naam: "
+
+#: ../../raid.pm:1
#, c-format
-msgid "Resizing Windows partition"
-msgstr "Windowslêerstelselgrense word bereken"
+msgid "mkraid failed"
+msgstr "mkraid het gefaal"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Resizing"
-msgstr "Grootteverandering"
+msgid "Button 3 Emulation"
+msgstr "Knop-3 emulasie"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files..."
+msgstr "Stoor in lêer"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "partition %s"
-msgstr "partisie %s"
+msgid "Israeli (Phonetic)"
+msgstr "Israelies (Foneties)"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Watter grootte wil u vir Windows behou?"
+msgid "access to rpm tools"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "edit"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
+msgid "You must choose/enter a printer/device!"
+msgstr "Tik drukkertoestel URI in"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Permission problem accessing CD."
msgstr ""
-"WAARSKUWING\n"
-"\n"
-"DrakX moet nou u WIndowspartisie se grootte verander. Hierdie operasie\n"
-"IS GEVAARLIK. Indien u nie alreeds so gemaak het nie, moet u hierdie "
-"installasie\n"
-"verlaat, scandisk onder Windows loop en dalk ook defrag. Dan kan u terugkeer "
-"na\n"
-"hierdie installasie. Rugstuen ook u data. Insien u skeer is van u saak, kies "
-"OK."
-#: ../../install_interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
-msgstr "U Windows-partisie is te gefragmenteer. Loop eers 'defrag' asb."
+msgid "Phone number"
+msgstr "Telefoonnommer"
-#: ../../install_interactive.pm:1
-#, fuzzy, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Gebruik die beskikbare spasie op die Windowspartisie"
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+msgid "Printer name, description, location"
+msgstr "Drukkernaam,. beskrywing, ligging"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (broadcast)"
msgstr ""
-"Die FAT-verstellingsprogram kan nie u partisie hanteer nie.\n"
-"Fout: %s"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Please choose the\n"
+"media for backup."
+msgstr "Kies asb. 'n taal om te gebruik."
+
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Watter partisie se grootte wil u verander?"
+msgid "Use Xinerama extension"
+msgstr "Gebruik Xinerama-ekstensies"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Gebruik die beskikbare spasie op die Windowspartisie"
+msgid "Loopback"
+msgstr "Teruglus"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid ""
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
+msgstr ""
+"Kon nie mkbootdisk ordentelik afsluit nie:\n"
+" %s \n"
+" %s"
+
+#: ../../standalone/drakxtv:1
#, fuzzy, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgid "West Europe"
+msgstr "Europa"
+
+#: ../../standalone.pm:1
+#, c-format
+msgid ""
+"[OPTIONS] [PROGRAM_NAME]\n"
+"\n"
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
msgstr ""
-"Daar is geen FAT partisies om te verander of om as teruglus (nie genoeg "
-"spasie nie) te gebruik nie"
-#: ../../install_interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Harddrake2 version %s"
+msgstr "Hardeskyfdeteksie."
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Ruilpartisiegrootte in MB: "
+msgid "Copying %s"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "Choose color"
+msgstr "Kies 'n monitor"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Root partition size in MB: "
-msgstr "Basispartisiegrootte in MB:"
+msgid "Dominican Republic"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose the sizes"
-msgstr "Kies die groottes"
+msgid "Swaziland"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Watter partisie wil u vir Linux4Win gebruik?"
+msgid "Set-UID"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you are using CDRW media"
+msgstr "Kliek asb. op 'n partisie"
+
+#: ../../help.pm:1
#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Gebruik vir die Windows-partisie vir teruglus"
+msgid ""
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "There is no existing partition to use"
-msgstr "Daar is geen bestaande partisies om te gebruik nie"
+msgid " on parallel port \\#%s"
+msgstr ""
-#: ../../install_interactive.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "Use existing partitions"
-msgstr "Gebruik bestaande partisies"
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr ""
+"Gebruik die %c en %c sleutels om die inskrywing te kies wat uitgelig moet "
+"word."
-#: ../../install_interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
+msgid "Generic 2 Button Mouse"
+msgstr "Generiese 2-knop muis"
-#: ../../install_interactive.pm:1
+#: ../../lvm.pm:1
#, c-format
-msgid "Use free space"
-msgstr "Gebruik beskikbare spasie"
+msgid "Remove the logical volumes first\n"
+msgstr "Verwyder eers die logiese volumes\n"
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "U moet oor 'n FAT partisie wat as /boot/efi geheg is, beskik"
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "Die uitgeligte inskrywing sal outomaties in %ds gelaai word."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"You don't have a swap partition.\n"
-"\n"
-"Continue anyway?"
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
msgstr ""
-"U het nie 'n ruilpartisie nie\n"
-"\n"
-"Wil u steeds voortgaan?"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet access"
+msgstr "Internettoegang"
+
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
+"y coordinate of text box\n"
+"in number of characters"
msgstr ""
-"U moet 'n wortelpartisie definieer.\n"
-"Skep 'n partisie of kliek op 'n bestaande een.\n"
-"Kies dan Hegpunt en stel dit dan '/'."
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
msgstr ""
-"Sekere hardeware op u rekenaar benodig geslote drywers.\n"
-" U kan inligting hieroorvind by %s"
-#: ../../install_messages.pm:1
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Enabling servers..."
+msgstr "Bedieneers word aktiveer..."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing test page(s)..."
+msgstr "Toetsbladsy(e) word gedruk..."
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "There is already a partition with mount point %s\n"
+msgstr "Daar is alreeds 'n partisie met hegpunt %s\n"
+
+#: ../../help.pm:1
#, c-format
msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
+"At this point, you need to decide where you want to install the Mandrake\n"
+"Linux operating system on your hard drive. If your hard drive is empty or\n"
+"if an existing operating system is using all the available space you will\n"
+"have to partition the drive. Basically, partitioning a hard drive consists\n"
+"of logically dividing it to create the space needed to install your new\n"
+"Mandrake Linux system.\n"
"\n"
-"%s\n"
+"Because the process of partitioning a hard drive is usually irreversible\n"
+"and can lead to lost data if there is an existing operating system already\n"
+"installed on the drive, partitioning can be intimidating and stressful if\n"
+"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
+"simplifies this process. Before continuing with this step, read through the\n"
+"rest of this section and above all, take your time.\n"
"\n"
+"Depending on your hard drive configuration, several options are available:\n"
"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Geluk, installasie is afgehandel.\n"
-"Verwyder die herlaaimedium en druk 'enter' om te herlaai.\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
"\n"
+" Before choosing this option, please understand that after this\n"
+"procedure, the size of your Microsoft Windows partition will be smaller\n"
+"then when you started. You will have less free space under Microsoft\n"
+"Windows to store your data or to install new software.\n"
"\n"
-"Vir lapinligting oor hierdie vrystelling vanMandrake Linux,\n"
-"bekyk die errata beskikbaar op\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
"\n"
+" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
-"%s\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
+" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
-"Inligting oor stelskonfigurasie is beskikbaar in die postinstallasie-\n"
-"hoofstuk in die Offisiële Liux-Mandrake Gebruikersgids."
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
+msgstr ""
-#: ../../install_messages.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Ukraine"
+msgstr "Ukranies"
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Application:"
+msgstr "Magtiging"
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgid "External ISDN modem"
+msgstr "Eksterne ISDN-kaart"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, report check result by mail."
msgstr ""
-#: ../../install_messages.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
+msgid "Your choice? (default %s) "
+msgstr "U keuse? (verstek %s) "
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
msgstr ""
-#: ../../install_messages.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid " / Region"
+msgstr "Resolusie"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
+"The classic bug sound tester is to run the following commands:\n"
"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
"\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
"\n"
-"4. Intellectual Property Rights\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
"\n"
-"5. Governing Laws \n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Gaan stap '%s' binne\n"
+msgid ""
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
+"\n"
+msgstr ""
+"Toetsbladsy(e) is na die drukkerstelsel gestuur.\n"
+"Dit mag 'n tydjie neem voordat drukwerk begin.\n"
+"Drukstatus:\n"
+"%s\n"
+"\n"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Help"
+msgid "daily"
msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "not configured"
-msgstr "herkonfigureer"
+msgid "and one unknown printer"
+msgstr "Voeg drukker by"
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
-#, c-format
-msgid "Configure"
-msgstr "Konfigureer"
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "Ireland"
+msgstr "Yslandies"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Go on anyway?"
-msgstr "Gaan steeds voort?"
+msgid "kernel version"
+msgstr "bedryfstelselkernweergawe"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "Daar was 'n fout met die installasie van die pakkette:"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid " Restore Configuration "
+msgstr "Netwerkkonfigurasie"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Daar was 'n fout met pakkette:"
+#: ../../Xconfig/test.pm:1
+#, fuzzy, c-format
+msgid "Is this the correct setting?"
+msgstr "Is dit korrek?"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Change your Cd-Rom!\n"
+"You will now set up your Internet/network connection. If you wish to\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Verander u CDROM!\n"
+"When configuring your network, the available connections options are:\n"
+"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
+"simple LAN connection (Ethernet).\n"
"\n"
-"Sit asb. die CDROM getiteld \"%s\" in die aandrywer en druk OK. Indien u "
-"nie\n"
-"hieroor beskik nie, druk Kanselleer om installasies vanaf dié CDROM te vermy."
+"We will not detail each configuration option - just make sure that you have\n"
+"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
+"from your Internet Service Provider or system administrator.\n"
+"\n"
+"You can consult the ``Starter Guide'' chapter about Internet connections\n"
+"for details about the configuration, or simply wait until your system is\n"
+"installed and use the program described there to configure your connection."
+msgstr ""
-#
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Refuse"
-msgstr "Weier"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Wizard Configuration"
+msgstr "Konfigurasie"
-#
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Accept"
-msgstr "Aanvaar "
+msgid "Autoprobe"
+msgstr "Aftas"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Installing package %s"
-msgstr "Installeer pakket %s"
+msgid "Backup system files..."
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "%d packages"
-msgstr "%d pakkette"
+msgid "Can't use broadcast with no NIS domain"
+msgstr "Kan nie uitsaau sonder 'n NIS-domein nie"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "No details"
-msgstr "Detail"
+msgid "Removing printer \"%s\"..."
+msgstr "Drukkerdata word gelees..."
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Details"
-msgstr "Detail"
+msgid "drakfloppy"
+msgstr "drakfloppy"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Wag asb. installasie word voorberei"
+msgid ""
+"Please indicate where the auto_install.cfg file is located.\n"
+"\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
+"\n"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Time remaining "
-msgstr "Tyd oor "
+msgid "information level that can be obtained through the cpuid instruction"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Estimating"
-msgstr "Skatting"
+msgid "Peru"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid " on device: %s"
+msgstr "Muistoestel: %s\n"
+
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Installing"
-msgstr "Besig met installasie"
+msgid "Remove Windows(TM)"
+msgstr "Verwyder Windows(TM)"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Kies die pakkette wat u wil installeer"
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr "Laai die X-fontbediener (dis nodig vir XFree)."
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Minimal install"
-msgstr "Minimale installasie"
+msgid ""
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Updating package selection"
-msgstr "Pakketseleksie word opgedateer"
+msgid "Select the font file or directory and click on 'Add'"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Load/Save on floppy"
-msgstr "Laai/Stoor op floppie"
+msgid "Madagascar"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "<- Previous"
-msgstr "<- Vorige"
+msgid "Urpmi"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Install"
-msgstr "Installasie"
+msgid "Cron not available yet as non-root"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Show automatically selected packages"
-msgstr "Wys outogeselekteerde pakkette."
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "System"
+msgstr "Stelselmode"
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "U kan nie hierdie pakket deselekteer nie. Dit moet opgradeer word."
+#: ../../any.pm:1 ../../help.pm:1
+#, fuzzy, c-format
+msgid "Do you want to use this feature?"
+msgstr "Wil u aboot gebruik?"
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+msgid "Arabic"
msgstr ""
-"Hierdie pakket moet opgradeer word\n"
-"Is u seker u wil dit deselekteer?"
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "U kan nie heirdie pakket verwyder nie. Dis alreeds geïnstalleer"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Hierdie is 'n verpligte pakket. Dit kan nie uitgehaal word nie."
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"- Options:\n"
+msgstr "Opsies"
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't select/unselect this package"
-msgstr "U kan nie hierdie pakket selekteer/deselekteer nie"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Password required"
+msgstr "Wagwoord"
-#
-#: ../../install_steps_gtk.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "The following packages are going to be removed"
-msgstr "Dei volgende pakkette gaan verwyder word"
+msgid "%d minutes"
+msgstr "%d minute"
-#
-#: ../../install_steps_gtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "The following packages are going to be installed"
-msgstr "Die volgende pakkette gaan installeer word"
+msgid "Graphics card: %s"
+msgstr "Videokaart: %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You can't select this package as there is not enough space left to install it"
+msgid "WebDAV transfer failed!"
msgstr ""
-"U kan nie hierdie pakket selekteer nie, omdat daar nie meer spasie "
-"beskikbaar is nie"
-#: ../../install_steps_gtk.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Importance: %s\n"
-msgstr "Belangrikheid: %s\n"
+msgid "XFree configuration"
+msgstr "XFree-konfigurasie"
-#: ../../install_steps_gtk.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Size: %d KB\n"
-msgstr "Groote: %d KB\n"
+msgid "Choose action"
+msgstr "Kies aksie"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Version: %s\n"
-msgstr "Weergawe: %s\n"
+msgid "French Polynesia"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Name: %s\n"
-msgstr "Naam: %s\n"
+msgid ""
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Bad package"
-msgstr "Foutiewe pakket"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "Ondersteun die OKI-4W en aanpasbare WIN-drukkers"
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Other"
-msgstr "Ander"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr "Loop die ALSA (Gevorderde Linux Klankargitektuur) klankstelsel"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Totale grootte: %d / %d MB"
+msgid "Installing driver for %s card %s"
+msgstr "Drywer vir %s kaart %s in installasieproses"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Next ->"
-msgstr "Volgende ->"
+msgid ""
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Individual package selection"
-msgstr "Individuele pakketseleksie"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Enable Server"
+msgstr "Datbasis"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Package Group Selection"
-msgstr "Kies pakketgroepe"
+msgid "Ukrainian"
+msgstr "Ukranies"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
msgstr ""
-"U stelsel het min hulpbronne beskikbaar. U mag dalk probleme ondervind met "
-"die installering\n"
-"van Mandrake Linux. In so 'n geval probeer eerder die teksinstallasie. "
-"Daarvoor moet u\n"
-"'F1' druk wanneer u vanaf die CDROM herlaai en dan 'text' op die "
-"instruksielyn intik."
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Save packages selection"
-msgstr "Stoor pakketseleksie"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "Sit 'n herlaaiskyf wat gebruik is, in aandrywer %s"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Automated"
-msgstr "Outomaties"
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Local network(s)"
+msgstr "geen netwerkkaart gevind nie"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Replay"
-msgstr "Herspeel"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
+msgstr "Verwyder Windows(TM)"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Generate auto install floppy"
-msgstr "Skep outoinstallasieskyf"
+msgid "Firewire controllers"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Reboot"
-msgstr "Basis"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
msgid ""
-"Some steps are not completed.\n"
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
"\n"
-"Do you really want to quit now?"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
msgstr ""
-"Bepaalde stappe is nie afgehandel nie.\n"
+"LILO (Die LInux LOader) en Grub is herlaaistelsels. Beide kan GNU/Linux of "
+"enige ander\n"
+"bedryfstelsel wat op u rekenar teenwoordig is, laai. Gewoonlik word hierdie\n"
+"beryfstelsels reg bespeur en bygevoeg. Indien nie, kan u 'n inskrywing maak\n"
+"op hierdie skerm. Maak seker u kies die korrekte paramters.\n"
"\n"
-"Wil u werklik nou aborteer?"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Creating auto install floppy..."
-msgstr "Outoinstallasieskyf word geskep."
+"\n"
+"U mag dalk toegang tot ander bedryfstelsels beperk, in welke geval u die "
+"nodige\n"
+"inskrywings kan uitvee. Maar dan het u die nodige herlaaiskywe nodig om die\n"
+"betrokke bedryfstelsels te laai."
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Sit 'n leë floppie in aandrywer %s"
+msgid "System mode"
+msgstr "Stelselmode"
-#: ../../install_steps_interactive.pm:1
-#, c-format
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
msgstr ""
+"Om na 'n Netware drukker te druk moet u die volgende voorsien:\n"
+"Netware rekenaarnaam (dis nie noodwendig dieselfde as die TCP/IP\n"
+"rekenaarnaam nie); moontlik die IP adres van die drukkerbediener;\n"
+"die drukkernaam; toepaslike gebruikerskode en wagwoord."
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Installasie van herlaaiprogram het gefaal a.g.v. hierdie fout: "
+#
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Netmask:"
+msgstr "Netmasker"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Installing bootloader"
-msgstr "Herlaaistelselinstallasie"
+msgid "Append"
+msgstr "Aanlas"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
+msgid "Refresh printer list (to display all available remote CUPS printers)"
msgstr ""
-"Die 'aboot' installasie het gefaal. Wil u 'n installasie afwurg al\n"
-"word die eerste partisie vernietig?"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Do you want to use aboot?"
-msgstr "Wil u aboot gebruik?"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
+"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
+"\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
+"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
+"\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Preparing bootloader..."
-msgstr "Herlaaistelsel word voorberei"
+msgid ""
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
+"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
+"\n"
+"It also provides a much higher API than OSS.\n"
+"\n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
+msgstr ""
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Domain Admin Password"
+msgid ""
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
+"\n"
+"You may prefer to replay the installation.\n"
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Domain Admin User Name"
-msgstr "Domeinnaam"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Windows Domain"
-msgstr "NIS-domein"
-
-#: ../../install_steps_interactive.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Authentication Windows Domain"
-msgstr "LDAP-magtiging"
+msgid "Network printer \"%s\", port %s"
+msgstr "Netwerkdrukker (sok)"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
msgstr ""
+"Kies asb. die netwerkkaart wat aan die loakel area netwerk gekoppel is."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "NIS Server"
-msgstr "NIS-bediener"
+msgid "OK to restore the other files."
+msgstr ""
#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Domain"
-msgstr "NIS-domein"
+#, fuzzy, c-format
+msgid "Please choose your keyboard layout."
+msgstr "Wat is u sleutelborduitleg?"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Authentication NIS"
-msgstr "NIS-magtiging"
+msgid "Printer Device URI"
+msgstr "Drukkertoestel URI"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "NIS"
-msgstr "NIS"
+msgid "Not erasable media!"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "LDAP Server"
-msgstr "LDAP-bediener"
+msgid "Terminal-based"
+msgstr "Terminaaltipe"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "LDAP Base dn"
-msgstr "LDAP Basis-dn"
+msgid "Installing a printing system in the %s security level"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Authentication LDAP"
-msgstr "LDAP-magtiging"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "The user name is too long"
+msgstr "Hierdie genruikerskode bestaan alreeds"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "LDAP"
-msgstr "KDAP"
+msgid "Other OS (windows...)"
+msgstr "Ander bedryfstelsel (windows...)"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Local files"
-msgstr "Plaaslike lêers"
+msgid "WebDAV remote site already in sync!"
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
-#, c-format
-msgid "Authentication"
-msgstr "Magtiging"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Reading printer database..."
+msgstr "Drukkerdata word gelees..."
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr ""
-"Hierdie wagwoord is te eenvoudig. Dit moet ten minste %d karakters bevat."
+msgid "Generate auto install floppy"
+msgstr "Skep outoinstallasieskyf"
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No password"
-msgstr "Geen wagwoord"
+msgid ""
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Set root password"
-msgstr "Kies 'root' se wagwoord"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Somalia"
+msgstr "NIS-domein"
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
+msgid "No open source driver"
msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#, c-format
-msgid "Services: %d activated for %d registered"
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid ""
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
msgstr ""
+"Hierdie is Vlak-4 sekuriteit, maar die stelsel is afgeslote.\n"
+"Sekuriteitseienskappe is maksimaal."
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Services"
-msgstr "Dienste"
-
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "System"
-msgstr "Stelselmode"
+msgid "Nicaragua"
+msgstr ""
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "%s on %s"
-msgstr "Poort"
+msgid "New Caledonia"
+msgstr "Masedonies"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Bootloader"
-msgstr "Herlaaistelsel om te gebruik"
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "European protocol (EDSS1)"
+msgstr "Europese protokol (EDSS1)"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Boot"
-msgstr "Basis"
+#: ../../any.pm:1
+#, c-format
+msgid "Video mode"
+msgstr "Videomodus"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "disabled"
-msgstr "deaktiveer"
+msgid "Please enter your email address below "
+msgstr "Probeer asb. weer"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "activated"
-msgstr "Aktiveer nou dadelik"
+msgid "Oman"
+msgstr "NIS-domein"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Firewall"
-msgstr "Vuurmuur/Netwerkroteerder"
+msgid "Network Monitoring"
+msgstr "Netwerkkonfigurasie"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Security"
-msgstr "Sekuriteit"
+msgid "SunOS"
+msgstr "SunOS"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Security Level"
-msgstr "Sekuriteitsvlak word gestel."
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "New size in MB: "
+msgstr "Nuwe grootte in MB: "
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Network"
-msgstr "Netwerkkoppelvlak"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Partition table type: %s\n"
+msgstr "Partisietabeltipe: %s\n"
#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Network & Internet"
-msgstr "Netwerkkoppelvlak"
+msgid "Authentication Windows Domain"
+msgstr "LDAP-magtiging"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Graphical interface"
-msgstr "X met herlaai"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "US keyboard"
+msgstr "VSA sleutelbord"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Hardware"
-msgstr ""
+msgid "Buttons emulation"
+msgstr "Knoppie-emulasie"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "TV card"
-msgstr "TV-kaaer"
+msgid ", network printer \"%s\", port %s"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
+msgid ""
+"\n"
+"Drakbackup activities via tape:\n"
+"\n"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgid ""
+"\n"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "Beskik u oor nog?"
+msgid "Sending Speed:"
+msgstr "Stoor in lêer"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Sound card"
-msgstr "Klankkaart"
+msgid "Halt bug"
+msgstr ""
-#
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Remote CUPS server"
-msgstr "Verwyder CUPS-bediener"
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Mail alert configuration"
+msgstr "Konfigurasie"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No printer"
-msgstr "Geen drukker"
+msgid "Tokelau"
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer"
-msgstr "Drukker"
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Bosnian"
+msgstr "Estoniaans"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#, c-format
-msgid "Mouse"
-msgstr "Muis"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Release: "
+msgstr "Wag asb."
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Timezone"
-msgstr "Tydsone"
+msgid "Connection speed"
+msgstr "Konneksiespoed"
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Keyboard"
-msgstr "Sleutelbord"
+msgid ""
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Summary"
-msgstr "Opsomming"
+msgid "Namibia"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NTP Server"
-msgstr "NTP-bediener"
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Database Server"
+msgstr "Datbasis"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Outotydsinkronisasie met NTP"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Hardewareklok gestel vir GMT"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "Kan nie 'n partisie by geformatteerde RAID md%d byvoeg nie"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Which is your timezone?"
-msgstr "Wat is u tydsone?"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Would you like to try again?"
-msgstr "Wil u 'n drukwerk nou konfigureer?"
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
+msgstr ""
+"Hierdie kaart kan ondersteuning vir 3D-hardewareversnelling onder XFree86 %s "
+"bied,\n"
+"MAAR LET DAAROP DAT DIT EKSPERIMENTEEL IS EN DIE REKENAAR MAG VRIES.\n"
+"U kaart word deur XFree %s ondersteun, wat beter 2D-ondersteuning bied."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Kon nie vurk nie: %s"
+msgid "Please wait, setting security options..."
+msgstr "Wag asb. installasie word voorberei"
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Spieël word gekontak vir die lys van pakkette"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Kies 'n spieël waar die pakkette verkry kan word"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr "Spieël word gekontak vir die lys van pakkette"
+msgid "Launch the graphical environment when your system starts"
+msgstr "Laai X-Windowstelsel met herlaai"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates ?"
+msgid "hourly"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Sit asb. die module-opdateringsfloppie in aandrywer %s"
+msgid " Successfuly Restored on %s "
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Sit 'n herlaaiskyf wat gebruik is, in aandrywer %s"
+msgid "Making printer port available for CUPS..."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Post-install configuration"
-msgstr "Postinstallasiekonfigurasie"
+msgid "Antigua and Barbuda"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"Installing package %s\n"
-"%d%%"
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""
-"Installeer nou pakket %s\n"
-"%d%%"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Preparing installation"
-msgstr "Berei installasie voor"
+msgid "Spanish"
+msgstr "Spaans"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CDROM getiteld \"%s\""
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Start"
+msgstr "Toestand"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
msgstr ""
-"Indien u oor al die gelyste CD's beskik, kliek OK.\n"
-"Indien u oor geen van die gelyste CD's beskik nie, kliek Kanselleer.\n"
-"Indien u net oor sekere CDs beskik, deselekteer die ander en kliek OK."
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
-#, c-format
-msgid "All"
-msgstr "Alles"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Configuring applications..."
+msgstr "Konfigureer drukker"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr ""
+msgid "Normal modem connection"
+msgstr "Normale modemkonneksie"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "With X"
-msgstr "Wag"
+msgid "File Selection"
+msgstr "Pakketkeuse"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+" tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+" standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Type of install"
-msgstr "Kies pakket om te installeer"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
-msgid "Selected size is larger than available space"
-msgstr "Geselekteerde grootte is groter as beskikbare spasie."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "Sit 'n floppie met die pakketkeuse in aandrywer "
+msgid "CUPS"
+msgstr "CUPS"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Loading from floppy"
-msgstr "Oplaai vanaf floppie"
+msgid "Run config tool"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Package selection"
-msgstr "Pakketkeuse"
+msgid "Bootloader installation"
+msgstr "Herlaaiprogram installasie"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Save on floppy"
-msgstr "Stoor op floppie"
+msgid "Root partition size in MB: "
+msgstr "Basispartisiegrootte in MB:"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Load from floppy"
-msgstr "Laai vanaf floppie"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "Hierdie is 'n verpligte pakket. Dit kan nie uitgehaal word nie."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
+msgid "Etherboot ISO image is %s"
msgstr ""
-"Kies asb. die laai of stoor pakketkeuse op die floppie.\n"
-"Die formaat is dieselfde as outoinstallasie-genereerde floppies."
-#: ../../install_steps_interactive.pm:1
-#, c-format
+#: ../../services.pm:1
+#, fuzzy, c-format
msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
msgstr ""
-"U stelsel het nie genoeg plek vir 'n installasie of opgradering nie (%d > %d)"
+"named (BIND) is die domeinnaamdiens (DNS) wat gebruik word om\n"
+"rekenaarname na IP-adresse toe om te skakel."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Looking for available packages..."
-msgstr "Soek vir beskikbare pakkette"
+msgid "Disconnect..."
+msgstr "Diskonnekteer..."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Soek vir pakkette om op te gradeer."
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Looking at packages already installed..."
-msgstr "U kan nie heirdie pakket verwyder nie. Dis alreeds geïnstalleer"
+msgid "Saint Lucia"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "Soek vir beskikbare pakkette"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "Nie genoeg ruilarea om die installasie te voltooi. Voeg asb. by."
+msgid "Report"
+msgstr "Poort"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
+msgid "Palau"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Check bad blocks?"
-msgstr "Toets vir foutiewe areas?"
+msgid "level"
+msgstr "vlak"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Kies die partisies om te formatteer"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "U moet herlaai om die partisietabelveranderinge te aktiveer"
+msgid "Package Group Selection"
+msgstr "Kies pakketgroepe"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+msgid "Restore Via Network Protocol: %s"
msgstr ""
-"Geen beskikbare 1MB herlaaipartisie nie! Installasie sal voortgaan, maar u "
-"sal herlaaipartisie met DiskDrake moet skep indien u die stelsel wil "
-"herlaai."
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Choose the mount points"
-msgstr "Kies die hegpunte"
+msgid "You can configure each parameter of the module here."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Hegpunte vir partisies word nou gesoek"
+msgid "Choose the resolution and the color depth"
+msgstr "Kies die resolusie en kleurdiepte"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "No partition available"
-msgstr "geen beskikbare partisies"
+msgid "Emulate third button?"
+msgstr "Emuleer derde knop?"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configuring IDE"
-msgstr "IDE word opgestel"
+msgid ""
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "IDE"
-msgstr "IDE"
+msgid "Mount"
+msgstr "Heg"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "Stel PCMCIA op..."
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Creating auto install floppy"
+msgstr "Outoinstallasieskyf word geskep."
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+#: ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Install updates"
+msgstr "Installeer stelsel"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Button 3 Emulation"
-msgstr "Knop-3 emulasie"
+msgid "text box height"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Button 2 Emulation"
-msgstr "Knop-2 Emulasie"
+msgid "State"
+msgstr "Toestand"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Buttons emulation"
-msgstr "Knoppie-emulasie"
+msgid "Be sure a media is present for the device %s"
+msgstr "versker asb dat die regte mediatipe vir toestel %s beskikbaar is"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Aan watter seriaalpoort is u muis gekoppel?"
+msgid "Enable multiple profiles"
+msgstr "Gebruik multiprofiele"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mouse Port"
-msgstr "Muispoort"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Please choose your type of mouse."
-msgstr "Wat is u muistoestel?"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Encryption key for %s"
-msgstr "Die wagwoorde stem nie ooreen nie."
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Upgrade %s"
-msgstr "Opgradeer"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Is hierdie 'n installasie of opgradering?"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Install/Upgrade"
-msgstr "Installeer/Opgradeer"
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "Hierdie is die volledige lys van beskikbare sleutelborde"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Wat is u sleutelborduitleg?"
+msgid "Local printer"
+msgstr "Plaaslike drukker"
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Quit"
-msgstr "Verlaat"
+msgid "Files Restored..."
+msgstr ""
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "License agreement"
-msgstr "Lisensieooreenkoms"
+msgid "Package selection"
+msgstr "Pakketkeuse"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "An error occurred"
-msgstr "'n Fout het voorgekom"
+msgid "Mauritania"
+msgstr ""
-#: ../../install_steps_newt.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
+"\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
+"\n"
msgstr ""
-" <Tab>/<Alt-Tab> tussen elemente | <Space> selekteer | <F12> volgende skerm "
-
-#: ../../install_steps_newt.pm:1
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Installasie %s"
-#: ../../install_steps.pm:1
-#, c-format
-msgid "No floppy drive available"
-msgstr "Geen sagteskyaandrywer beskikbaar nie"
-
-#: ../../install_steps.pm:1
-#, c-format
-msgid "Welcome to %s"
-msgstr "Welkom by %s"
-
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
msgstr ""
-"Sekere belangrike pakkette het nie korrek geïnstalleer nie.\n"
-"Óf die CDROM-aandrywer óf die CD is foutief.\n"
-"Toets die CD op 'n werkende Linux installasie met \"rpm -qpl Mandrake/RPMS/*."
-"rpm\"\n"
-#: ../../install_steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duplikaat hegpunt %s"
+msgid "All primary partitions are used"
+msgstr "Alle primêre partisies is gebruik"
-#: ../../install_steps.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
msgstr ""
-"'n Fout het plaasgevind en ek weet nie hoe om dit veilig te hanteer\n"
-"nie. Gaan op u eie risiko voort."
+"Nadat dit klaar is, sal dit beter wes om u X-omgewing te herlaai\n"
+"om die rekenaarnaamveranderingprobleem te voorkom."
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
+#: ../../services.pm:1
#, c-format
-msgid "Please wait"
-msgstr "Wag asb."
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr "Outobespeuring en hardewarekonfigurasie met herlaaityd."
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Installation Server Configuration"
+msgstr "Sluit konfigurasie af"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Ok"
-msgstr "OK"
+msgid "Configuring IDE"
+msgstr "IDE word opgestel"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Network functionality not configured"
+msgstr "Monitor is nie opgestel nie"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Configure module"
+msgstr "Stel muistoestel op"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Finish"
+msgid "Cocos (Keeling) Islands"
msgstr ""
-#: ../../interactive.pm:1 ../../standalone/draksec:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnecting from the Internet "
+msgstr "Konnekteer aan die internet"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Basic"
-msgstr ""
+msgid "You'll need to reboot before the modification can take place"
+msgstr "U sal moet herlaai voor die veranderinge geaktiveer kan word"
-#: ../../interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Advanced"
-msgstr "Gevorderd"
+msgid "Provider phone number"
+msgstr "Voorsiener se telefoonnommer"
#
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Remove"
-msgstr "Verwyder drukker"
-
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#, c-format
-msgid "Modify"
-msgstr "Verander"
+msgid "Host %s"
+msgstr "Rekenaarnaam"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
-#, c-format
-msgid "Add"
-msgstr "Voeg by"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Armenia"
+msgstr "Armenies (oud)"
-#: ../../interactive.pm:1
-#, c-format
-msgid "Choose a file"
-msgstr "Kies 'n lêer"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Fiji"
+msgstr "Finnies"
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
-msgstr ""
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Right \"Windows\" key"
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Left \"Windows\" key"
-msgstr ""
+msgid "Second floppy drive"
+msgstr "Tweede sagteskyfaandrywer"
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "\"Menu\" key"
+msgid "About Harddrake"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Alt and Shift keys simultaneously"
+msgid "Drive capacity"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Ctrl and Alt keys simultaneously"
+msgid ""
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
msgstr ""
+"Sit 'n floppie in die aandrywer.\n"
+"Alle data op hierdie floppie sal verloor word."
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "CapsLock key"
-msgstr ""
+msgid "Size: %s"
+msgstr "Grootte: %s"
#: ../../keyboard.pm:1
#, c-format
msgid "Control and Shift keys simultaneously"
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "secondary"
+msgstr "%d sekondes"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Right Alt key"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "View Backup Configuration."
+msgstr "Netwerkkonfigurasie"
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslaavs (latynse uitleg)"
+msgid "if set to yes, report check result to syslog."
+msgstr ""
-#: ../../keyboard.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Viëtnamees \"nommerry\" QWERTY"
+msgid "No password"
+msgstr "Geen wagwoord"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "US keyboard (international)"
-msgstr "VSA internasionale sleutelbord"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Nigeria"
+msgstr "seriaal"
-#: ../../keyboard.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "US keyboard"
-msgstr "VSA sleutelbord"
+msgid "There is no existing partition to use"
+msgstr "Daar is geen bestaande partisies om te gebruik nie"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "UK keyboard"
-msgstr "VK sleutelbord"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
+msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Ukrainian"
-msgstr "Ukranies"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
+msgstr ""
+"Om aan 'n sokdrukker te konnekteer, moet u die rekenaarnaam van die\n"
+"drukker voorsien en dalk ook 'n poortnommer voorsien.\n"
+"Met HP JetDirect-bedieners is die poortnommer gewoonlik 9100,\n"
+"maar dit mag anders wees met ander bedieners. Raadpleeg die handleiding\n"
+"wat saam met die hardeware gekom het."
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turks (moderne \"Q\" modem)"
+msgid "Hard drive information"
+msgstr "Hardeskyfinligting"
#: ../../keyboard.pm:1
#, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turks (tradisionele \"F\" model)"
+msgid "Russian"
+msgstr "Russies"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Tajik keyboard"
-msgstr "Tajik sleutelbord"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Jordan"
+msgstr "Iranies"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Thai keyboard"
-msgstr "Thai sleutelbord"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Hide files"
+msgstr "mkraid het gefaal"
-#: ../../keyboard.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "Armenies (tikmasjien)"
+msgid "Auto-detect printers connected to this machine"
+msgstr "Eksterne drukker"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Tamil (ISCII-layout)"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Serbian (cyrillic)"
-msgstr "Serwies (Kirillies)"
+msgid "Sorry, no floppy drive available"
+msgstr "Jammer, geen sagteskyfaandrywer beskikbaar nie"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Slovaaks (QWERTY)"
+msgid "Bolivia"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovaaks (QWERTZ)"
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Slovenian"
-msgstr "Sloveens"
+msgid "Bad package"
+msgstr "Foutiewe pakket"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Swedish"
-msgstr "Sweeds"
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Russian (Yawerty)"
-msgstr "Russue (Yawerty)"
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid "DrakSec Basic Options"
+msgstr "Opsies"
-#: ../../keyboard.pm:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Russian"
-msgstr "Russies"
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program. Just type \"sndconfig\" in a console."
+msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Romanian (qwerty)"
-msgstr "Romanies (QWERTY)"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Romania"
+msgstr "NIS-domein"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Romanian (qwertz)"
-msgstr "Romanies (QWERTZ)"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "choose device"
+msgstr "Herlaaitoestel"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Canadian (Quebec)"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Canada"
msgstr "Kanadees (Quebec)"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Portuguese"
-msgstr "Portugees"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Pools (QWERTZ uitleg)"
-
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Pools (QWERTY uitleg)"
+msgid "Remove from LVM"
+msgstr "Verwyder uit LVM"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Norwegian"
-msgstr "Norweegs"
+msgid "Timezone"
+msgstr "Tydsone"
#: ../../keyboard.pm:1
#, c-format
-msgid "Dutch"
-msgstr "Nederlands"
+msgid "German"
+msgstr "Duits"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Maltese (US)"
-msgstr ""
+msgid "Next ->"
+msgstr "Volgende ->"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Maltese (UK)"
+msgid ""
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Serwies (Kirillies)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Myanmar (Burmese)"
+msgid ""
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
msgstr ""
+"\n"
+"Dis hoogs waarskynlik dat hierdie partisie\n"
+"drywerpartisie is en verkieslik alleen gelos\n"
+"moet word.\n"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Macedonian"
-msgstr "Masedonies"
-
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Malayalam"
+msgid "Guinea-Bissau"
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Latvian"
-msgstr "Latvies"
-
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituanies \"foneties\" QWERTY"
+msgid "Horizontal refresh rate"
+msgstr "Horisontale verfristempo"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituanies \"nommerry\" QWERTY"
+msgid ""
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
+msgstr ""
+"Kan nie hegpunt ontset nie, omdat hierdie partisie vir teruglus\n"
+"gebruik word. Verwyder eers die teruglus."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituanies AZERTY (nuut)"
+msgid ""
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituanies AZERTY (oud)"
+msgid "USB controllers"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../Xconfig/various.pm:1
#, fuzzy, c-format
-msgid "Laotian"
-msgstr "Latvies"
+msgid "What norm is your TV using?"
+msgstr "Watter tipe is u ISDN-konneksie?"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Latin American"
-msgstr "Latyns-Amerikaans"
+msgid "Type:"
+msgstr "Tipe:"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Korean keyboard"
-msgstr "Koreaanse sleutelbord"
+msgid "Share name"
+msgstr "Drukkernaam:"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Japanese 106 keys"
-msgstr "Japanees 106 sleutels"
+msgid "enable"
+msgstr "Aktiveer"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
+msgstr "Spieël word gekontak vir die lys van pakkette"
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Inuktitut"
+msgid ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
msgstr ""
+"Daar was 'n probleem met die herlaai van die netwerk.\n"
+"\n"
+"%s"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Italian"
-msgstr "Italiaans"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Remove the loopback file?"
+msgstr "Terugluslêer %s word geformateer"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Icelandic"
-msgstr "Yslandies"
+msgid "Selected size is larger than available space"
+msgstr "Geselekteerde grootte is groter as beskikbare spasie."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Iranian"
-msgstr "Iranies"
+msgid "NCP server name missing!"
+msgstr "NCP-bedienernaam ontbreek!"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "Israelies (Foneties)"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Please choose your country."
+msgstr "Wat is u muistoestel?"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Israeli"
-msgstr "Israelies"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Hard Disk Backup files..."
+msgstr "Korrupte rugsteunlêer"
#: ../../keyboard.pm:1
-#, c-format
-msgid "Croatian"
-msgstr "Kroaties"
+#, fuzzy, c-format
+msgid "Laotian"
+msgstr "Latvies"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Hungarian"
-msgstr "Hongaars"
+msgid "Samoa"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Gurmukhi"
+msgid ""
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
msgstr ""
+"Die 'rstat' protokol laat gebruikers op 'n netwerk toe om\n"
+"werksverrigtinginligting oor enige rekenaar op die netwerk te onttrek."
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Gujarati"
+msgid "Re-generating list of configured scanners ..."
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Greek"
-msgstr "Grieks"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Scanner"
+msgstr "Selekteer 'n videokaart"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgies (Latynse uitleg)"
+#: ../../Xconfig/test.pm:1
+#, fuzzy, c-format
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr "Waarskuwing: Toetsing is gevaarlik met hierdie videokaart"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgies (Russiese uitleg)"
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr ""
+"Die gebruikerskode maag alleenlikui kleinletter, nommers, '-' en '_' bestaan"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "French"
-msgstr "Frans"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Menudrake"
+msgstr "verpligtend"
-#: ../../keyboard.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Finnish"
-msgstr "Finnies"
+msgid "Welcome To Crackers"
+msgstr "Krakers welkom"
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Spanish"
-msgstr "Spaans"
+msgid "Module options:"
+msgstr "Module opsies:"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Estonian"
-msgstr "Estoniaans"
+msgid "Secure your networks with the Multi Network Firewall"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (VSA)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norweegs)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak (VSA)"
+msgid "Go on without configuring the network"
+msgstr "Stel netwerk op"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Danish"
-msgstr "Deens"
+msgid "Abort"
+msgstr "Aborteer"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Devanagari"
+msgid "No password prompt on %s at port %s"
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "German (no dead keys)"
-msgstr "Duits (geen dooie sleutels)"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "Kies die pakkette wat u wil installeer"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "German"
-msgstr "Duits"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Usage of remote scanners"
+msgstr "Gebruik beskikbare spasie"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Czech (QWERTY)"
-msgstr "Tseggies (QWERTY)"
+msgid "\t-CDROM.\n"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Czech (QWERTZ)"
-msgstr "Tseggies (QWERTZ)"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
+msgstr "U Windows-partisie is te gefragmenteer. Loop eers 'defrag' asb."
#: ../../keyboard.pm:1
#, c-format
-msgid "Swiss (French layout)"
-msgstr "Switsers (Franse uitleg)"
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak (Norweegs)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Swiss (German layout)"
-msgstr "Switsers (Duitse uitleg)"
+msgid "Hard Disk Backup Progress..."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Belarusian"
-msgstr "Belarussies"
-
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Bosnian"
-msgstr "Estoniaans"
+msgid "Unable to fork: %s"
+msgstr "Kon nie vurk nie: %s"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasiliaans (ABNT-2)"
-
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Bulgarian (BDS)"
-msgstr "Bulgaars"
+msgid "Type: "
+msgstr "Tipe:"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "Armenies (Foneties)"
+msgid "<-- Edit Client"
+msgstr "DHCP-Kliënt"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Bengali"
-msgstr "Aktiveer"
+msgid "no fonts found"
+msgstr "%s is nie gevind nie"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Belgian"
-msgstr "Belgies"
+msgid "Mouse"
+msgstr "Muis"
-#: ../../keyboard.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjani (latyns)"
+msgid "not enough room in /boot"
+msgstr "nie genoeg spasie in /boot nie"
-#: ../../keyboard.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Arabic"
+msgid "Choosing an arbitratry driver"
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Armenian (phonetic)"
-msgstr "Armenies (Foneties)"
-
-#: ../../keyboard.pm:1
+#
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Armenian (typewriter)"
-msgstr "Armenies (tikmasjien)"
+msgid "Host name"
+msgstr "Rekenaarnaam"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Armenian (old)"
-msgstr "Armenies (oud)"
+msgid "Liechtenstein"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Albanian"
-msgstr "Albanies"
+msgid "the color of the progress bar"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Polish"
-msgstr "Pools"
+msgid "Suppress Fonts Files"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Zimbabwe"
-msgstr "moontlik"
+msgid "Add to RAID"
+msgstr "Voeg by RAID"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Zambia"
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
msgstr ""
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "South Africa"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Serbia"
-msgstr "seriaal"
+msgid "No floppy drive available!"
+msgstr "Geen sagteskyaandrywer beskikbaar nie"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mayotte"
+msgid ""
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Yemen"
-msgstr ""
+msgid "Continue anyway?"
+msgstr "Wil u in elk geval voortgaan?"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Samoa"
+msgid ""
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
msgstr ""
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Wallis and Futuna"
-msgstr ""
+msgid "Printer"
+msgstr "Drukker"
#: ../../lang.pm:1
#, c-format
-msgid "Vanuatu"
+msgid "Saudi Arabia"
msgstr ""
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Vietnam"
-msgstr ""
+msgid "Internet"
+msgstr "Internet"
-#: ../../lang.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Virgin Islands (U.S.)"
+msgid "Some devices were added:\n"
msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Virgin Islands (British)"
-msgstr ""
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "Geometrie: %s silinders, %s koppe, %s sektore\n"
-#: ../../lang.pm:1
-#, c-format
-msgid "Venezuela"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing on the printer \"%s\""
+msgstr "Netwerk op pad af"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Saint Vincent and the Grenadines"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Vatican"
-msgstr "Latvies"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Uzbekistan"
-msgstr ""
+msgid "Restore From Tape"
+msgstr "Reddingspartisietabel"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Uruguay"
-msgstr ""
+msgid "Choose the profile to configure"
+msgstr "Kies die profiel om te konfigureer"
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "United States Minor Outlying Islands"
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Uganda"
-msgstr "Opgradeer"
-
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Ukraine"
-msgstr "Ukranies"
+msgid "Backup Now from configuration file"
+msgstr "Netwerkkonfigurasie"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Tanzania"
+msgid "Mount points should contain only alphanumerical characters"
msgstr ""
-#: ../../lang.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Taiwan"
-msgstr "Latvies"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Tuvalu"
-msgstr ""
+msgid "Restarting printing system..."
+msgstr "Watter drukkerstelsel verlang u?"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Trinidad and Tobago"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
msgstr ""
-#: ../../lang.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Turkey"
-msgstr ""
+msgid "See hardware info"
+msgstr "Sien hardeware inligting"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Tonga"
-msgstr ""
+msgid "First sector of boot partition"
+msgstr "Eerste sektor van herlaaipartisie"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Tunisia"
-msgstr ""
+msgid "Printer manufacturer, model"
+msgstr "Drukkervervaardiger, model"
-#: ../../lang.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Turkmenistan"
-msgstr ""
+msgid "PDQ - Print, Don't Queue"
+msgstr "PDQ - Druk sonder drukkertou"
-#: ../../lang.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "East Timor"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Tokelau"
+msgid "Subnet Mask:"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Tajikistan"
+msgid "LiLo and Bootsplash themes installation successfull"
msgstr ""
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Thailand"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
msgstr ""
+"Die kritiese twee parameters is die vertikale verfristempo (die tempo\n"
+"waarteen die hele skerm verfris) en die horisontale sinkronisasietempo (die\n"
+"tempo waarteen die horisontale skandeerlyne vertoon word). Lg. is die\n"
+"belangrikste.\n"
+"\n"
+"Dit is BAIE BELANGRIK dat u nie 'n sinkronisasie bereik buite dié van u\n"
+"monitor spesifiseer nie, dit kan die monitor beskadig. Indien u twyfel,\n"
+"kies konservatief."
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Togo"
-msgstr ""
+msgid "Modify"
+msgstr "Verander"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "French Southern Territories"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Chad"
+msgid "Need hostname, username and password!"
msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Turks and Caicos Islands"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Swaziland"
+msgid "HardDrake"
msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Syria"
-msgstr ""
+msgid "new"
+msgstr "nuut"
-#: ../../lang.pm:1
-#, c-format
-msgid "El Salvador"
-msgstr ""
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Would you like to try again?"
+msgstr "Wil u 'n drukwerk nou konfigureer?"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Sao Tome and Principe"
-msgstr ""
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Suriname"
-msgstr "Drukkernaam:"
+msgid "Wizard"
+msgstr "Assistent"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Somalia"
-msgstr "NIS-domein"
+msgid "Edit selected server"
+msgstr "%s bespeur"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Senegal"
-msgstr "Aktiveer"
+msgid "Please choose where you want to backup"
+msgstr "Kies die pakkette wat u wil installeer"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "San Marino"
-msgstr ""
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr "U moet herlaai om die partisietabelveranderinge te aktiveer"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sierra Leone"
+msgid "Do not include the browser cache"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Slovakia"
-msgstr "Sloveens"
-
-#: ../../lang.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr ""
+msgid "Please, choose your keyboard layout."
+msgstr "Wat is u sleutelborduitleg?"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Slovenia"
-msgstr "Sloveens"
+#: ../../mouse.pm:1 ../../security/level.pm:1
+#, c-format
+msgid "Standard"
+msgstr "Standaard"
-#: ../../lang.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Saint Helena"
-msgstr ""
+msgid "Please choose your mouse type."
+msgstr "Wat is u muistoestel?"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Singapore"
-msgstr ""
+msgid "Connect..."
+msgstr "Konnekteer..."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Sudan"
-msgstr "SunOS"
+msgid "Failed to configure printer \"%s\"!"
+msgstr "Konfigureer drukker"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Seychelles"
-msgstr "Dop"
+msgid "not configured"
+msgstr "herkonfigureer"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Solomon Islands"
-msgstr ""
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
-#: ../../lang.pm:1
-#, c-format
-msgid "Saudi Arabia"
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "About"
+msgstr "Aborteer"
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Rwanda"
-msgstr ""
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Russia"
-msgstr "Russies"
+msgid "Proxies configuration"
+msgstr "Instaanbedienerkonfigurasie"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Romania"
-msgstr "NIS-domein"
+#: ../../mouse.pm:1
+#, c-format
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Reunion"
-msgstr "Resolusie"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Start: sector %s\n"
+msgstr "Begin: sektor %s\n"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Qatar"
-msgstr "Toestand"
+msgid "Network interface already configured"
+msgstr "Monitor is nie opgestel nie"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Palau"
+msgid "Couldn't access the floppy!"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Paraguay"
+msgid "connecting to Bugzilla wizard ..."
msgstr ""
-#: ../../lang.pm:1
+#: ../../network/drakfirewall.pm:1
#, fuzzy, c-format
-msgid "Portugal"
-msgstr "Poort"
+msgid "Mail Server"
+msgstr "Datbasis"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Palestine"
-msgstr "Stoor pakketseleksie"
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Please click on a partition"
+msgstr "Kliek asb. op 'n partisie"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Puerto Rico"
-msgstr "Protokol"
+#: ../../any.pm:1 ../../standalone/drakbackup:1
+#, c-format
+msgid "Linux"
+msgstr "Linux"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Pitcairn"
-msgstr "Druk"
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "Have a nice day!"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Saint Pierre and Miquelon"
+msgid "across Network"
msgstr ""
-#: ../../lang.pm:1
+#: ../../help.pm:1
+#, c-format
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
+
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Poland"
-msgstr "Yslandies"
+msgid "Upgrade %s"
+msgstr "Opgradeer"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pakistan"
-msgstr ""
+msgid "Select Printer Connection"
+msgstr "Kies drukkerkonneksie"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Philippines"
+msgid "Scanning for TV channels in progress ..."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Papua New Guinea"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "French Polynesia"
+msgid "IP Range Start:"
msgstr ""
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Peru"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
msgstr ""
+"Die internetsuperbedienerdiensprogram (gewoonlik inetd genoem) laai 'n\n"
+"verskeidenheid internetdienste soos nodig. Dit is gewoonlik verantwoordelik "
+"vir\n"
+"telnet, ftp, rsh en rlogin. As inetd gesper word, sper dit ook die dienste "
+"waarvoor\n"
+"inetd verantwoordelik is."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Panama"
+msgid "the height of the progress bar"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Oman"
-msgstr "NIS-domein"
-
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "New Zealand"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Niue"
-msgstr "Geen video"
-
-#: ../../lang.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Nauru"
+msgid "Argentina"
msgstr ""
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Nepal"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Nicaragua"
-msgstr ""
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "Domain Name Server"
+msgstr "Domeinnaam"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "Nigeria"
-msgstr "seriaal"
+msgid "Security Level:"
+msgstr "Sekuriteitsvlak word gestel."
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Norfolk Island"
-msgstr ""
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Niger"
-msgstr "Hoog"
+msgid "Mount points must begin with a leading /"
+msgstr "Hegpunte moet met 'n / begin"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "New Caledonia"
-msgstr "Masedonies"
+msgid "Postfix Mail Server"
+msgstr "Postfix e-posbediener, Inn netnuusbediener"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Namibia"
-msgstr ""
+msgid "Quit without saving"
+msgstr "Verlaat, maar moenie iets stoor nie"
#: ../../lang.pm:1
#, c-format
-msgid "Mozambique"
+msgid "Yemen"
msgstr ""
-#: ../../lang.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Malaysia"
+msgid "This product is available on the MandrakeStore Web site."
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Mexico"
-msgstr "Muis"
-
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Malawi"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
msgstr ""
-#: ../../lang.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Maldives"
+msgid "=> There are many things to choose from (%s).\n"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Mauritius"
-msgstr "Verskeie"
+#: ../../steps.pm:1
+#, c-format
+msgid "Hard drive detection"
+msgstr "Hardeskyfdeteksie."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Malta"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
msgstr ""
-#: ../../lang.pm:1
+#
+#: ../../diskdrake/dav.pm:1
#, fuzzy, c-format
-msgid "Montserrat"
-msgstr "Muispoort"
+msgid "Please enter the WebDAV server URL"
+msgstr "Toets asb. die muis"
#: ../../lang.pm:1
#, c-format
-msgid "Mauritania"
+msgid "Tajikistan"
msgstr ""
-#: ../../lang.pm:1
+#
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Martinique"
-msgstr ""
+msgid "Accept"
+msgstr "Aanvaar "
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Northern Mariana Islands"
-msgstr ""
+msgid "Description"
+msgstr "Beskrywing"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Mongolia"
-msgstr ""
+msgid "Error opening %s for writing: %s"
+msgstr "Four om %s in skryfmode te open: %s"
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Myanmar"
-msgstr ""
+msgid "Mouse type: %s\n"
+msgstr "Muistipe: %s\n"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Mali"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
msgstr ""
+"U videokaart kan vir 3D-hardewareversnelling ondestuen word in XFree %s."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Macedonia"
-msgstr "Masedonies"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "Wat is u sleutelborduitleg?"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Marshall Islands"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Madagascar"
-msgstr ""
+msgid "Expert Area"
+msgstr "Kundige area"
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Moldova"
-msgstr ""
+msgid "Choose a monitor"
+msgstr "Kies 'n monitor"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Monaco"
-msgstr "Monitor"
+#: ../../any.pm:1
+#, c-format
+msgid "Empty label not allowed"
+msgstr "Leë etiket word nie toegelaat nie"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Morocco"
+msgid "Maltese (UK)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Libya"
-msgstr ""
+msgid "I can't add any more partition"
+msgstr "Ek kan nie meer partisies byvoeg nie"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Latvia"
-msgstr "Latvies"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Size in MB: "
+msgstr "Grootte in MB: "
-#: ../../lang.pm:1
+#
+#: ../../printer/main.pm:1
#, c-format
-msgid "Luxembourg"
-msgstr ""
+msgid "Remote printer"
+msgstr "Eksterne drukker"
-#: ../../lang.pm:1
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Please choose a language to use."
+msgstr "Kies asb. 'n taal om te gebruik."
+
+#: ../../network/network.pm:1
#, c-format
-msgid "Lithuania"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
msgstr ""
+"WAARSKUWING: Die toestel is alreeds opgestel om aan die internette "
+"konnekteer.\n"
+"U kan die toestel net so aanvaar.\n"
+"Veranderinge aan onderstaande velde sal hierdie konfigurasie oorskryf."
-#: ../../lang.pm:1
-#, c-format
-msgid "Lesotho"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "I can set up your computer to automatically log on one user."
msgstr ""
+"Ek kan u rekenaar so opstel om X outomaties een gebruiker in te teken.\n"
+"Verlang u hierdie funksionaliteit?"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Liberia"
-msgstr "seriaal"
+msgid "Floppy format"
+msgstr "Formatteer"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Sri Lanka"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Generic Printers"
+msgstr "Drukker"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Liechtenstein"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Saint Lucia"
+msgid "The scanners on this machine are available to other computers"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "First sector of the root partition"
+msgstr "Eerste sektor van herlaaipartisie"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Alternative drivers"
+msgstr "Alternatiewe toetsbladsy (A4)"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lebanon"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Laos"
-msgstr ""
+msgid "Initrd"
+msgstr "Initrd"
#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Cape Verde"
+msgstr "Maak boom toe"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Kazakhstan"
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Cayman Islands"
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
msgstr ""
#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Kuwait"
-msgstr "Verlaat"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Korea"
-msgstr "Nog"
+msgid "Guam"
+msgstr "Speletjies"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Korea (North)"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr ""
+msgid "/Options/Test"
+msgstr "/Opsies/Toets"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Comoros"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
msgstr ""
+"Hierdie vlak moet met sorg gebruik word. Dit maak 'n stelsel baie maklik\n"
+"om te gebruik, maar is baie sensitief. Dit moet nie gebruik vir 'n rekenaar\n"
+"wat aan ander rekenaars of die internet gekoppel is nie. Daar is geen "
+"wagwoord\n"
+"toegang nie."
-#: ../../lang.pm:1
-#, c-format
-msgid "Kiribati"
-msgstr ""
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid "Mounting partition %s"
+msgstr "Partisie %s word formateer"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Cambodia"
-msgstr ""
+msgid "User name"
+msgstr "Gebruikerskode"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Kyrgyzstan"
-msgstr ""
+msgid "New configuration (isdn-light)"
+msgstr "Nuwe konfigurasie (Ligte ISDN/isdn-light)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Kenya"
-msgstr "Sleutelbord"
+msgid "Userdrake"
+msgstr "Drukker"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Japan"
-msgstr ""
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "Watter partisie wil u vir Linux4Win gebruik?"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Jordan"
-msgstr "Iranies"
+msgid "Backup system"
+msgstr "Stel lêerstelsels op"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Jamaica"
+msgid "Test pages"
+msgstr "Toetsbladsye"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"List of data to restore:\n"
+"\n"
msgstr ""
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, fuzzy, c-format
-msgid "Iceland"
-msgstr "Yslandies"
+msgid "Checking %s"
+msgstr "LPD word verwyder..."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Iran"
-msgstr "Iranies"
+msgid "TCP/Socket Printer Options"
+msgstr "Sokdrukkeropsies"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Iraq"
-msgstr ""
+msgid "Card mem (DMA)"
+msgstr "Kaartgeheue (DMA)"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "British Indian Ocean Territory"
+msgid "France"
+msgstr "Frankryk"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "browse"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "India"
-msgstr "Iranies"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Checking installed software..."
+msgstr "Installeerde sagteware word deursoek..."
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Israel"
-msgstr "Israelies"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Remote printer name missing!"
+msgstr "Eksterne drukkernam ontbreek!"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Ireland"
-msgstr "Yslandies"
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr ""
+"Wil u hierdie drukker (\"%s\")\n"
+"die verstek drukker maak?"
#: ../../lang.pm:1
+#, c-format
+msgid "Turkey"
+msgstr ""
+
+#: ../../network/adsl.pm:1
#, fuzzy, c-format
-msgid "Indonesia"
-msgstr "niks"
+msgid "Alcatel speedtouch usb"
+msgstr "speedtouch USB"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Hungary"
-msgstr "Hongaars"
+msgid "Number of buttons"
+msgstr "2 knoppies"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Haiti"
-msgstr ""
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Viëtnamees \"nommerry\" QWERTY"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Croatia"
-msgstr "Kroaties"
+msgid "Module"
+msgstr "Muis"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Honduras"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Heard and McDonald Islands"
+msgid "Hardware"
msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Hong Kong"
+msgid "Ctrl and Alt keys simultaneously"
msgstr ""
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "China"
+msgid "United States"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Guyana"
-msgstr ""
+msgid "Default OS?"
+msgstr "Verstek bedryfstelsel?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Guinea-Bissau"
-msgstr ""
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Guam"
-msgstr "Speletjies"
+msgid "Swiss (German layout)"
+msgstr "Switsers (Duitse uitleg)"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Guatemala"
-msgstr "Portaal"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "Configure all heads independently"
+msgstr "Konfigureer skyfkoppe afsonderlik"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "South Georgia and the South Sandwich Islands"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Equatorial Guinea"
-msgstr ""
+msgid "NTP Server"
+msgstr "NTP-bediener"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Guadeloupe"
+msgid "Load/Save on floppy"
+msgstr "Laai/Stoor op floppie"
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "This theme does not yet have a bootsplash in %s !"
msgstr ""
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
+#, c-format
+msgid "nice"
+msgstr "oulik"
+
+#: ../../Xconfig/test.pm:1
#, fuzzy, c-format
-msgid "Guinea"
-msgstr "Algemeen"
+msgid "Leaving in %d seconds"
+msgstr "%d sekondes"
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Gambia"
-msgstr ""
+msgid "Please choose which serial port your modem is connected to."
+msgstr "Op watter seriaalpoort is u modem gekoppel?"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Greenland"
-msgstr "Yslandies"
+msgid "Country"
+msgstr "Heg"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Property"
+msgstr "Poort"
+
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Gibraltar"
+msgid "Ghostscript"
msgstr ""
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "LAN Configuration"
+msgstr "LAN konfigurasie"
+
#: ../../lang.pm:1
#, c-format
msgid "Ghana"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "French Guiana"
-msgstr "Frans"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Path or Module required"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Georgia"
-msgstr "Norweegs"
+msgid "Advanced Options"
+msgstr "Sluit konfigurasie af"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Grenada"
+msgid "Coma bug"
msgstr ""
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "United Kingdom"
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
msgstr ""
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Gabon"
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Faroe Islands"
-msgstr "Yslandies"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Micronesia"
-msgstr "Masedonies"
-
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr ""
+msgid "There was an error installing packages:"
+msgstr "Daar was 'n fout met die installasie van die pakkette:"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Fiji"
-msgstr "Finnies"
+msgid "Lexmark inkjet configuration"
+msgstr "Internetkonfigurasie"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Finland"
-msgstr ""
+msgid "Undo"
+msgstr "Herroep"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Ethiopia"
-msgstr "Estoniaans"
+msgid "Save partition table"
+msgstr "Skryf partisietabel"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Spain"
-msgstr "Spaans"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Finnish"
+msgstr "Finnies"
#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Eritrea"
-msgstr "Kundige area"
+msgid "Macedonia"
+msgstr "Masedonies"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Western Sahara"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Egypt"
-msgstr "Leeg"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Estonia"
-msgstr "Estoniaans"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovenian"
+msgstr "Sloveens"
#: ../../lang.pm:1
#, c-format
-msgid "Ecuador"
+msgid "Libya"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Algeria"
-msgstr "seriaal"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr ""
+"Skrips word konfigureer, sagterware installeer en bedieners afgeskop..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Dominican Republic"
+msgid ""
+"\n"
+"- Burn to CD"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Dominica"
-msgstr "NIS-domein"
+#: ../../any.pm:1
+#, c-format
+msgid "Table"
+msgstr "Tabel"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Denmark"
-msgstr ""
+msgid "I don't know how to format %s in type %s"
+msgstr "Ek weet nie om %s as tipe %s te formateer nie"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Djibouti"
-msgstr "Aborteer"
+msgid "Model"
+msgstr "Muis"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Cyprus"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Stop Server"
+msgstr "NIS-bediener"
+
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Christmas Island"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
msgstr ""
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "Cape Verde"
-msgstr "Maak boom toe"
+msgid "Modem"
+msgstr "Muis"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Cuba"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Colombia"
+msgid "Tuvalu"
msgstr ""
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "Cameroon"
+msgid "Use auto detection"
+msgstr "Gebruik outobespeuring"
+
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
msgstr ""
+"GPM verleen muisvermoëns aan teksgebaseerde Linuxapplikasies soos\n"
+"Midnight Commander. Dit laat muisgebaseerde knip-en-plak aksies op die\n"
+"konsole toe asook opspringkieskaarte."
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Chile"
-msgstr "Sluit af"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Started on boot"
+msgstr "Gelaai tydens herlaaityd"
-#: ../../lang.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Cook Islands"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Cote d'Ivoire"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Switzerland"
+msgid "Automatically find available printers on remote machines"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Congo (Brazzaville)"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Central African Republic"
+msgid "East Timor"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Congo (Kinshasa)"
-msgstr ""
+msgid "Del profile..."
+msgstr "Vee profiel uit..."
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Cocos (Keeling) Islands"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Canada"
-msgstr "Kanadees (Quebec)"
+msgid "Installing Foomatic..."
+msgstr "Installeer pakket %s"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Belize"
-msgstr "Verstel Grootte"
+#: ../../standalone/XFdrake:1
+#, c-format
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "Teken uit en gebruik dan Ctrl-Alt-Backspace"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "Belarus"
-msgstr "Belarussies"
+msgid "detected"
+msgstr "%s bespeur"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "Botswana"
-msgstr "Estoniaans"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Bouvet Island"
+msgid "The network needs to be restarted. Do you want to restart it ?"
msgstr ""
+"Hierdie pakket moet opgradeer word\n"
+"Is u seker u wil dit deselekteer?"
-#: ../../lang.pm:1
-#, c-format
-msgid "Bhutan"
-msgstr ""
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Package: "
+msgstr "Pakketkeuse"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Bahamas"
+msgid "Can't write /etc/sysconfig/bootsplash."
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Brazil"
+msgid "SECURITY WARNING!"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "StarOffice"
+msgstr "Kantoor"
+
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Bolivia"
-msgstr ""
+msgid "No, I don't want autologin"
+msgstr "Nee, ek verlang outo-aanteken"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Brunei Darussalam"
+msgid "Windows Migration tool"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, fuzzy, c-format
-msgid "Bermuda"
-msgstr "Duits"
+msgid "All languages"
+msgstr "Kies u taal"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Benin"
-msgstr "Belgies"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Burundi"
-msgstr ""
+msgid "Removing %s"
+msgstr "LPD word verwyder..."
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Bahrain"
-msgstr ""
+msgid "Testing your connection..."
+msgstr "Konneksie word getoets..."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Bulgaria"
-msgstr "Hongaars"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Burkina Faso"
-msgstr ""
+msgid "Cache size"
+msgstr "blokgrootte"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Bangladesh"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
msgstr ""
+"Wagwoorde is nou ontsper, maar gebruik as 'n netwerkrekenaar word nie "
+"aanbeveel nie."
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Barbados"
-msgstr ""
+msgid "Start sector: "
+msgstr "Kies sektor: "
#: ../../lang.pm:1
#, c-format
-msgid "Bosnia and Herzegovina"
+msgid "Congo (Brazzaville)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, fuzzy, c-format
-msgid "Azerbaijan"
-msgstr "Albanies"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr ""
+"Hierdie pakket moet opgradeer word\n"
+"Is u seker u wil dit deselekteer?"
#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Aruba"
-msgstr "Grub"
-
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "Australia"
-msgstr "seriaal"
+msgid "Seychelles"
+msgstr "Dop"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "American Samoa"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
msgstr ""
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Bad password on %s"
+msgstr "Geen wagwoord"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Argentina"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Antarctica"
+msgid "Zambia"
msgstr ""
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Angola"
+msgid "Security Administrator (login or email)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Netherlands Antilles"
+msgid "Sorry, we support only 2.4 kernels."
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Armenia"
-msgstr "Armenies (oud)"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Albania"
-msgstr "Albanies"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Romanian (qwerty)"
+msgstr "Romanies (QWERTY)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Anguilla"
+msgid "Under Devel ... please wait."
msgstr ""
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Antigua and Barbuda"
+msgid "Czech Republic"
msgstr ""
#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Egypt"
+msgstr "Leeg"
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid "United Arab Emirates"
-msgstr ""
+msgid "Old configuration (isdn4net)"
+msgstr "Ou konfigurasie (isdn4net)"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Sound card"
+msgstr "Klankkaart"
+
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Andorra"
-msgstr "Herroep"
+msgid "Import Fonts"
+msgstr "Formateer partisies"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, fuzzy, c-format
-msgid "Afghanistan"
-msgstr "Albanies"
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+"U het een massiewe FAT partisie. \n"
+"(gewoonlik deur DOS/Windows gebruik)\n"
+"Ek stel voor u verstel eers die grootte van dié partisie\n"
+"(kliek daarop en kliek dan op \"Verstel Grootte\")"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
+msgid "Suppress Temporary Files"
+msgstr ""
-#: ../../loopback.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Sirkulêre heg %s\n"
+msgid "Change partition type"
+msgstr "Verander partisietipe"
-#: ../../lvm.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Verwyder eers die logiese volumes\n"
+msgid ""
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
-#: ../../modules.pm:1
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Network Options"
+msgstr "Module opsies:"
+
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+"Display theme\n"
+"under console"
msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "BEWEEG DIE WIEL!"
+msgid "Statistics"
+msgstr ""
-#
-#: ../../mouse.pm:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "To activate the mouse,"
-msgstr "Om die muis te aktiveer"
+msgid "(on %s)"
+msgstr "(op %s)"
-#
#: ../../mouse.pm:1
#, c-format
-msgid "Please test the mouse"
-msgstr "Toets asb. die muis"
+msgid "MM Series"
+msgstr "MM Series"
-#: ../../mouse.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "No mouse"
-msgstr "Geen muis"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "none"
-msgstr "niks"
+msgid "average"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "3 buttons"
-msgstr "3 knoppies"
+msgid "New printer name"
+msgstr "Nuwe drukkernaam"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "2 buttons"
-msgstr "2 knoppies"
+msgid "Equatorial Guinea"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "1 button"
-msgstr "1 knop"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
-#: ../../mouse.pm:1
-#, c-format
-msgid "busmouse"
-msgstr "busmuis"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Build Backup"
+msgstr "Korrupte rugsteunlêer"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Muis (seriaal, ou C7 tipe)"
+msgid "Currently, no alternative possibility is available"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid "Romanian (qwertz)"
+msgstr "Romanies (QWERTZ)"
-#: ../../mouse.pm:1
-#, c-format
-msgid "MM Series"
-msgstr "MM Series"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Write Config"
+msgstr "herkonfigureer"
-#: ../../mouse.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+"Die 'routed' diensprogram hanteer outomatiese IP-roeteertabelopdatering\n"
+"via die RIP protokol. Alhoewel RIP baie gebruik word in klein netwerke, is\n"
+"meer komplekse protokolle nodig vir komplekse netwerke."
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "Kiribati"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Reeks (seriaal)"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+msgid "Browse"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid "CDROM"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "Wil u nou aan die internet konnekteer?"
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Generiese 3-knop muis"
+msgid "Belgian"
+msgstr "Belgies"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Generiese 2-knop muis"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Do you have an ISA sound card?"
+msgstr "Beskik u oor nog?"
-#: ../../mouse.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "serial"
-msgstr "seriaal"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
+msgstr ""
+"Geen ethernetkaart is op die stelsel gevind nie.\n"
+"Ek kan nie hierdie konneksietipe opstel nie."
-#: ../../mouse.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, fuzzy, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft IntelliMouse"
+msgid "Windows"
+msgstr "NIS-domein"
+
+#: ../../common.pm:1
+#, fuzzy, c-format
+msgid "Can't make screenshots before partitioning"
+msgstr "Ek kan nie meer partisies byvoeg nie"
#
-#: ../../mouse.pm:1
-#, c-format
-msgid "Wheel"
-msgstr "Wiel"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Host Name"
+msgstr "Rekenaarnaam"
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Generic"
-msgstr "Generies"
+msgid "/File/Save _As"
+msgstr "/Lêer/Stoor _as"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Generiese PS2 wielmuis"
+msgid "Delay before booting default image"
+msgstr "Wagperiode voro verstekstelsel gelaai word"
-#: ../../mouse.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+msgid "Restrict command line options"
+msgstr "Beperk instruksielynopsies"
-#: ../../mouse.pm:1 ../../security/level.pm:1
-#, c-format
-msgid "Standard"
-msgstr "Standaard"
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "East Europe"
+msgstr "Europa"
-#: ../../mouse.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - Muis"
+msgid "Use free space"
+msgstr "Gebruik beskikbare spasie"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Skakel tussen plat- en groepsortering"
+msgid "use dhcp"
+msgstr "gebruik dhcp"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Collapse Tree"
-msgstr "Maak boom toe"
+msgid "Mail alert"
+msgstr ""
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Expand Tree"
-msgstr "Maak boom oop"
+msgid "Internet configuration"
+msgstr "Internetkonfigurasie"
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Info"
-msgstr "Info"
+msgid "Uzbekistan"
+msgstr ""
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Is this correct?"
-msgstr "Is dit korrek?"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Detected %s"
+msgstr "%s bespeur"
-#: ../../my_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgid "/Autodetect _printers"
+msgstr "Gebruik outobespeuring"
-#: ../../partition_table.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "Error writing to file %s"
-msgstr "Fout in die skryf van %s"
+msgid "Finish"
+msgstr ""
-#: ../../partition_table.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Bad backup file"
-msgstr "Korrupte rugsteunlêer"
+msgid "Show automatically selected packages"
+msgstr "Wys outogeselekteerde pakkette."
-#: ../../partition_table.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Herstel van léer %s het gefaal: %s"
+msgid "CPU flags reported by the kernel"
+msgstr ""
-#: ../../partition_table.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+msgid "Togo"
msgstr ""
-"U het 'n gat die partisietabel maar ek kan dit nie gebruik nie.\n"
-"Die enigste oplossing is om die primêre partisie te skuif sodat die gat\n"
-"langs die ekstensie partisies is"
-#: ../../partition_table.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Ekstensiepartisie word nie op hierdie platform ondersteun nie"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr ""
-#: ../../partition_table.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "mount failed: "
-msgstr "heg het gefaal"
+msgid "16 MB"
+msgstr "16 MB"
-#: ../../pkgs.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "maybe"
-msgstr "moontlik"
+msgid "Please try again"
+msgstr "Probeer asb. weer"
-#: ../../pkgs.pm:1
-#, c-format
-msgid "nice"
-msgstr "oulik"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The model is correct"
+msgstr "Is dit korrek?"
-#: ../../pkgs.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "very nice"
-msgstr "baie oulik"
+msgid "FAT resizing failed: %s"
+msgstr "FAT-grootteverandering het gefaal: %s"
-#: ../../pkgs.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "important"
-msgstr "belangrik"
+msgid "Individual package selection"
+msgstr "Individuele pakketseleksie"
-#: ../../pkgs.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "must have"
-msgstr "benodig"
+msgid "This partition is not resizeable"
+msgstr "Hierdie partisie se greootte kan nie verstel word nie"
-#: ../../raid.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nie genoeg partisies vir RAID vlak %d nie\n"
+msgid "Location"
+msgstr "Ligging"
-#: ../../raid.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "mkraid failed"
-msgstr "mkraid het gefaal"
+msgid "USA (cable-hrc)"
+msgstr ""
-#: ../../raid.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid "Journalised FS"
+msgstr "Gejoernaliseer"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Guatemala"
+msgstr "Portaal"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "This machine"
+msgstr "(op hierdie rekenaar)"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid het gefaal. Dalk is 'raidtools' nie beskikbaar nie."
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "DOS-skyfletter: %s ('n raaiskoot)\n"
-#: ../../raid.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Kan nie 'n partisie by geformatteerde RAID md%d byvoeg nie"
+msgid "Select the files or directories and click on 'OK'"
+msgstr ""
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid "Stop"
-msgstr "Sektor"
+#: ../../lang.pm:1
+#, c-format
+msgid "Bahrain"
+msgstr ""
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid "Start"
-msgstr "Toestand"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "omit scsi modules"
+msgstr "laat SCSI-modules weg"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "On boot"
-msgstr "met herlaai"
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr ""
-#: ../../services.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"No additional information\n"
-"about this service, sorry."
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
msgstr ""
+"Omdat u netwerk installasie doen, is u netwerk aslreeds opgestel.\n"
+"Kliek op OK om hierdee konfigurasie te behou, of op Kanselleer om u Internet "
+"& Netwerkkonneksie te herkonfigureer.\n"
-#: ../../services.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Services and deamons"
-msgstr ""
+msgid "Keyboard layout: %s\n"
+msgstr "Sleutelbord uitleg: %s\n"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "stopped"
-msgstr "onaktief"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "running"
-msgstr "aktief"
+msgid "Maltese (US)"
+msgstr ""
#: ../../services.pm:1
#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Kies watter dienste moet outomaties begin met herlaaityd."
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"Heg en ontheg all netwerklêerstels (NFS), SMB (Lan Manger/Windows)\n"
+"en NCP (Netware) hegpunte."
-#: ../../services.pm:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "Database Server"
-msgstr "Datbasis"
+msgid "Tvcard"
+msgstr "TV-kaaer"
-#: ../../services.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Remote Administration"
-msgstr "Eksterne lpd drukkeropsies"
+msgid "Toggle between normal/expert mode"
+msgstr "Skakel oor na normale gebruiksvlak"
-#: ../../services.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "File sharing"
-msgstr ""
+msgid "Size"
+msgstr "Grootte"
-#: ../../services.pm:1
-#, c-format
-msgid "Internet"
-msgstr "Internet"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "GRUB"
+msgstr "GB"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Printing"
-msgstr "Druk"
+msgid "Greenland"
+msgstr "Yslandies"
-#: ../../services.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Laai die X-fontbediener (dis nodig vir XFree)."
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Laai die drywers vir u USB-toestelle"
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr ""
-#: ../../services.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"Syslog is die fasiliteit wat baie diensprogramme gebruik om boodskappe\n"
-"te log na 'n verskeidenheid loglêers. Dit is altyd goed om syslog te loop."
+"Die opstelling van die Internetkonnkesiedeling is alreeds gedoen.\n"
+"Dis tans aktief.\n"
+"\n"
+"Wat wil u doen?"
-#: ../../services.pm:1
-#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Laai die klankstelsel op u rekenaar"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Delete All NBIs"
+msgstr "Selekteer lOer"
-#: ../../services.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
msgstr ""
-"Die 'rwho' protokol laat eksterne gebruikers toe om te sien wie\n"
-"ingeteken is op 'n rkeneaar wat die 'rwho' diensprogram loop. (Amper soos "
-"'finger')."
-#: ../../services.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
+"if set, send the mail report to this email address else send it to root."
msgstr ""
-"Die 'rusers' protokol laat netwerkgebruikers toe om te bepaal wie\n"
-"aangeteken is op ander samewerkende rekenaars."
-#: ../../services.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Die 'rstat' protokol laat gebruikers op 'n netwerk toe om\n"
-"werksverrigtinginligting oor enige rekenaar op die netwerk te onttrek."
+msgid "Which configuration of XFree do you want to have?"
+msgstr "Watter tipe XFree-konfigurasie verlang u?"
-#: ../../services.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
+msgid "More"
+msgstr "Nog"
+
+#: ../../security/level.pm:1
+#, fuzzy, c-format
msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
msgstr ""
-"Die 'routed' diensprogram hanteer outomatiese IP-roeteertabelopdatering\n"
-"via die RIP protokol. Alhoewel RIP baie gebruik word in klein netwerke, is\n"
-"meer komplekse protokolle nodig vir komplekse netwerke."
+"Met hierdie sekuriteitsvlak, kan die stelsel as 'n bediener gebruik word.\n"
+"Die sekuriteit is goed genoeg sodat 'n stelsel konneksies wat baie kliënte\n"
+"af kan aanvaar."
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Account Password"
+msgstr "Wagwoord"
+
+#: ../../any.pm:1
#, c-format
msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
msgstr ""
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Tajik keyboard"
+msgstr "Tajik sleutelbord"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
msgstr ""
-"Stoor en herstel die stelselentropiepoel vir hoë kwaliteit,\n"
-"lukraaknommergenerasie."
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"POstfix is 'n E-posoordragagent (MTA). Dit is die program wat E-pos\n"
-"van een bediener na 'n ander oordra."
+msgid "Font List"
+msgstr "Hegpunt"
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
msgstr ""
-"Portmapper bestuur RPC-konneksies wat deur protokolle soos NFS en NIS\n"
-"gebruik word. Portmap moet loop op rekenaars wat as bedieners vir hierdie\n"
-"protokolle, en ander protokolle wat die RPC meganisme gebruik, dien."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
msgstr ""
-"PCMCIA is gewoonlik nodig om ondersteuning te verleen aan\n"
-"toestelle soos ethernet en modems in skootrekenaars. Dit sal nie\n"
-"gelaai word, behalwe as dit konfigureer is nie en dit is derhalwe\n"
-"veilig om op rekenaars te hê wat dit nie nodig het nie."
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Ondersteun die OKI-4W en aanpasbare WIN-drukkers"
+msgid "Select file"
+msgstr "Selekteer lOer"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
+"Choose the network or host on which the local printers should be made "
+"available:"
msgstr ""
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
msgstr ""
-"NFS is 'n populêre protokol vir lêerdeling oor TCP/IP netwerke.\n"
-"Hierdie diens vorosien die NFS-lêersluitfunksionaliteit."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
+msgid "Japan"
msgstr ""
-"NFS is 'n populêre protokol vir lêerdeling oor TCP/IP netwerke.\n"
-"Hierdie diens voorsien NFS-bedienerfunksionaliteit. Dit word via\n"
-"die /etc/exports lêer opgestel."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Print option list"
+msgstr "Drukkeropsies"
+
+#: ../../standalone/localedrake:1
#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
+msgid "The change is done, but to be effective you must logout"
msgstr ""
-"Aktiveer/Deaktiveer all netwerkkoppelvlakke wat opgestel is om by\n"
-"herlaaityf te begin."
-#: ../../services.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Search servers"
+msgstr "DNS bediener"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "NCP queue name missing!"
+msgstr "NCP-tounaam ontbreek!"
+
+#: ../../standalone/net_monitor:1
#, c-format
msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
+"Warning, another internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"Heg en ontheg all netwerklêerstels (NFS), SMB (Lan Manger/Windows)\n"
-"en NCP (Netware) hegpunte."
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Cd-Rom labeled \"%s\""
+msgstr "CDROM getiteld \"%s\""
#: ../../services.pm:1
-#, fuzzy, c-format
+#, c-format
msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
msgstr ""
-"named (BIND) is die domeinnaamdiens (DNS) wat gebruik word om\n"
-"rekenaarname na IP-adresse toe om te skakel."
+"Stoor en herstel die stelselentropiepoel vir hoë kwaliteit,\n"
+"lukraaknommergenerasie."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
msgstr ""
-#: ../../services.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
+msgid "Turn your computer into a reliable server"
msgstr ""
-"lpd is die drukkerdiensprogram en is nodig vir lpr om te funksioneer.\n"
-"Dit is 'n diens wat drukstukke na drukkers toe reguleer."
-#: ../../services.pm:1
+#: ../../network/network.pm:1
#, c-format
+msgid " (driver %s)"
+msgstr "(drywer %s)"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
+"Loopback file(s):\n"
+" %s\n"
+msgstr "Teruglus lêer(s): %s\n"
-#: ../../services.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Outobespeuring en hardewarekonfigurasie met herlaaityd."
+msgid "I don't know"
+msgstr "Ek weet nie"
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
+msgid ", TCP/IP host \"%s\", port %s"
msgstr ""
-#: ../../services.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
msgstr ""
-"Hierdie pakket laai die sleutelbordkaart soos dit in /etc/sysconfig/"
-"keyboard\n"
-"opgestel is. Dit kan vernader word met die kbdconfig nutsprogram. U moet "
-"dit\n"
-"op meeste rekenaars ongesper laat."
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
msgstr ""
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Post Uninstall"
+msgstr "Verlaay installasie"
+
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
+msgid " ("
msgstr ""
-"Die internetsuperbedienerdiensprogram (gewoonlik inetd genoem) laai 'n\n"
-"verskeidenheid internetdienste soos nodig. Dit is gewoonlik verantwoordelik "
-"vir\n"
-"telnet, ftp, rsh en rlogin. As inetd gesper word, sper dit ook die dienste "
-"waarvoor\n"
-"inetd verantwoordelik is."
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cpuid level"
+msgstr "Sekuriteitsvlak word gestel."
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Mongolian (cyrillic)"
+msgstr "Serwies (Kirillies)"
+
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache is 'n WWW-bediener.\n"
-"Dit kan HTML-lêers uitstuur en CGI's hanteer"
+msgid "Add a module"
+msgstr "Voeg module by"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
+msgid "Profile to delete:"
+msgstr "Profiel om uit te vee..."
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Local measure"
+msgstr "Plaaslike lêers"
+
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM verleen muisvermoëns aan teksgebaseerde Linuxapplikasies soos\n"
-"Midnight Commander. Dit laat muisgebaseerde knip-en-plak aksies op die\n"
-"konsole toe asook opspringkieskaarte."
+msgid "busmouse"
+msgstr "busmuis"
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron is die standaard UNIX program om gebruikergespesifiseerde programme\n"
-"op periodies geskeduleerde tye te loop. vixie cron voeg addisionele "
-"funksionaliteit\n"
-"by die standaard UNIX cron, insluitende beter sekuriteit en 'n kragtiger "
-"konfigurasie."
+msgid "Account Login (user name)"
+msgstr "Gebruikerskode"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
+msgid "Fdiv bug"
msgstr ""
-"Loop instruksies deur 'at' geskeduleer op die tyd deur 'at' gespesifiseer. "
-"Loop ook instruksiebondels wanneer die stelsellas laag genoeg is."
-#: ../../services.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
msgstr ""
-"apmd word gebruik om battery status te monitor en dit dan te log via "
-"syslog.\n"
-"Dit kan ook gebruik word om die rekenaar af te bring wanneer die battery "
-"swak is."
-#: ../../services.pm:1
-#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron is skeduleerder vir periodiese instruksies."
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Benin"
+msgstr "Belgies"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Loop die ALSA (Gevorderde Linux Klankargitektuur) klankstelsel"
+msgid "Uruguay"
+msgstr ""
-#: ../../standalone.pm:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Installing packages..."
-msgstr "Installeer pakket %s"
+msgid "Path selection"
+msgstr "Stoor pakketseleksie"
-#: ../../standalone.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+msgid "Name/IP address of host:"
msgstr ""
-#: ../../standalone.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
+msgid "Monitor: %s\n"
+msgstr "Monitor: %s\n"
+
+#: ../../partition_table/raw.pm:1
+#, fuzzy, c-format
msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
msgstr ""
+"Iets vrots gebeur op u hardeskyf.\n"
+"'n Dataintegriteitstoets het misluk.\n"
+"Dit beteken dat enigiets wat na u hardeskyf geskryf word as gemors sal "
+"eindig."
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer host name or IP missing!"
+msgstr "Drukkerbedienernaam ontbreek!"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check all users that you want to include in your backup."
+msgstr "Kies die pakkette wat u wil installeer"
+
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
msgstr ""
-#: ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgid "Bangladesh"
msgstr ""
-#: ../../standalone.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "Japan (cable)"
msgstr ""
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
-#: ../../standalone.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Initial tests"
+msgstr "Beginboodskap"
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr ""
+msgid "Continue"
+msgstr "Gaan voort"
-#: ../../standalone.pm:1
+#
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "[keyboard]"
-msgstr "Sleutelbord"
+msgid "Custom Restore"
+msgstr "Aangepaste"
-#: ../../standalone.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
msgstr ""
-#: ../../standalone.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
+msgid "Script-based"
+msgstr "Skriptipe"
+
+#: ../../install_any.pm:1 ../../partition_table.pm:1
+#, c-format
+msgid "Error reading file %s"
+msgstr "Fout met die les van lêer %s"
+
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "PLL setting:"
+msgstr "Formatering"
+
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#, c-format
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "U moet oor 'n FAT partisie wat as /boot/efi geheg is, beskik"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid " on "
msgstr ""
-#: ../../standalone.pm:1
+#: ../../diskdrake/dav.pm:1
+#, c-format
+msgid "The URL must begin with http:// or https://"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
msgstr ""
+"U kan die URI om die drukker te bereik direk spesifiseer. Die URI moet in "
+"CUPS- of Foomatic-formaat wees. Nie alle UTI-tipes moet deur al die "
+"spoelprogramme ondersteun nie."
+
+#: ../../any.pm:1
+#, c-format
+msgid "Other OS (SunOS...)"
+msgstr "Ander bedryfstelsel (SunOS...)"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Install/Upgrade"
+msgstr "Installeer/Opgradeer"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "%d packages"
+msgstr "%d pakkette"
#: ../../standalone.pm:1
#, c-format
@@ -6243,3364 +5822,3807 @@ msgid ""
"--version : show version number.\n"
msgstr ""
-#: ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Domain Authentication Required"
+msgstr "Magtiging"
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
msgstr ""
-#: ../../steps.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Exit install"
-msgstr "Verlaay installasie"
+msgid "Costa Rica"
+msgstr ""
-#: ../../steps.pm:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Install updates"
-msgstr "Installeer stelsel"
+msgid "Use libsafe for servers"
+msgstr "Selekteer opsies vir bediener"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configure services"
-msgstr "Konfigureer dienste"
+msgid "Icelandic"
+msgstr "Yslandies"
-#: ../../steps.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Configure X"
-msgstr "Stel X op"
+msgid ""
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
-#: ../../steps.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Install bootloader"
-msgstr "Installeer herlaaistelsel"
+msgid "Please relog into %s to activate the changes"
+msgstr "Teken asb. weer in %s om veranderinge te aktiveer"
-#: ../../steps.pm:1
-#, c-format
-msgid "Configure networking"
-msgstr "Stel netwerk op"
+#: ../../my_gtk.pm:1
+#, fuzzy, c-format
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-#: ../../steps.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Add a user"
-msgstr "Voeg 'n gebruiker by"
+msgid "Lilo/grub mode"
+msgstr "LILO/GRUB metode"
-#: ../../steps.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Root password"
-msgstr "Kies 'root' se wagwoord"
+msgid "Output"
+msgstr "Uitset"
-#: ../../steps.pm:1
+#: ../../loopback.pm:1
#, c-format
-msgid "Install system"
-msgstr "Installeer stelsel"
+msgid "Circular mounts %s\n"
+msgstr "Sirkulêre heg %s\n"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose packages to install"
-msgstr "Kies pakkette om te installeer"
+msgid "Martinique"
+msgstr ""
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Format partitions"
-msgstr "Formateer partisies"
+msgid "HardDrive / NFS"
+msgstr ""
-#: ../../steps.pm:1
+#: ../../modules/parameters.pm:1
#, fuzzy, c-format
-msgid "Partitioning"
-msgstr "Druk"
+msgid "a number"
+msgstr "Telefoonnommer"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Choose your keyboard"
-msgstr "Kies u sleutelbord"
+msgid "Swedish"
+msgstr "Sweeds"
-#: ../../steps.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Select installation class"
-msgstr "Kies installasieklas"
+msgid "Which %s driver should I try?"
+msgstr "Watter %s drywer meot ek probeer?"
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Hard drive detection"
-msgstr "Hardeskyfdeteksie."
+msgid ""
+"You will receive an alert if one of the selected services is no longer "
+"running"
+msgstr ""
-#: ../../steps.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Configure mouse"
-msgstr "Stel muistoestel op"
+msgid "Filesystem types:"
+msgstr "LOersteltipes:"
-#: ../../steps.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "License"
+msgid ", multi-function device on HP JetDirect"
msgstr ""
-#: ../../steps.pm:1
-#, c-format
-msgid "Language"
-msgstr "Kies u taal"
-
-#: ../../ugtk2.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "utopia 25"
+msgid "Northern Mariana Islands"
msgstr ""
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, c-format
-msgid "OK"
-msgstr "OK"
+msgid "none"
+msgstr "niks"
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "user :"
+msgstr "Gebruikerskode"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please enter your password"
+msgstr "Probeer asb. weer"
+
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "logdrake"
+msgid ""
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
msgstr ""
-#: ../../ugtk.pm:1
-#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Floppy"
+msgstr "Stoor op floppie"
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installasievertoondrywer)"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "Kliek asb. op 'n partisie"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+msgid "Ghostscript referencing"
msgstr ""
-"Hierdie kaart kan ondersteuning vir 3D-hardewareversnelling onder XFree86 %s "
-"bied,\n"
-"MAAR LET DAAROP DAT DIT EKSPERIMENTEEL IS EN DIE REKENAAR MAG VRIES."
-#: ../../Xconfig/card.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Bootloader"
+msgstr "Herlaaistelsel om te gebruik"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s met EKSPERIMENTELE 3D-hardewareversnelling"
+msgid "Move"
+msgstr "Skuif"
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"U videokaart kan vir 3D-hardewareversnelling ondestuen word in XFree %s."
+msgid "Bootloader to use"
+msgstr "Herlaaistelsel om te gebruik"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s met 3D-hardwareversnelling"
+msgid "SMB server host"
+msgstr "SMB-bedienernaam"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Name Servers:"
+msgstr "NIS-bediener"
+
+#: ../../install_messages.pm:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
msgstr ""
-"Hierdie kaart kan ondersteuning vir 3D-hardewareversnelling onder XFree86 %s "
-"bied,\n"
-"MAAR LET DAAROP DAT DIT EKSPERIMENTEEL IS EN DIE REKENAAR MAG VRIES.\n"
-"U kaart word deur XFree %s ondersteun, wat beter 2D-ondersteuning bied."
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgstr ""
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
msgstr ""
-"U videokaart kan slegs 3D-versnelling onder XFree %s ondersteun.\n"
-"DIt word wel onder XFree %s ondersteun wat dalk beter 2D-ondersteuning het."
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
+msgid "4 billion colors (32 bits)"
+msgstr "4 biljoen kleure (32 bis)"
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Konfigureer net die \"%s\" kaart (%s)"
+msgid "Micronesia"
+msgstr "Masedonies"
-#: ../../Xconfig/card.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Use Xinerama extension"
-msgstr "Gebruik Xinerama-ekstensies"
+msgid "License"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configure all heads independently"
-msgstr "Konfigureer skyfkoppe afsonderlik"
+msgid "This may take a moment to generate the keys."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Watter tipe XFree-konfigurasie verlang u?"
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "XFree configuration"
-msgstr "XFree-konfigurasie"
+msgid "Sagem (using pppoa) usb"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Kies die geheue grootte van u videokaart"
-
-#: ../../Xconfig/card.pm:1
-#, fuzzy, c-format
msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
-"U stelsel onderstuen multikopkonfigurasie.\n"
-"Wat wil u doen?"
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Multi-head configuration"
-msgstr "Multikopkonfigurasie"
+"'n Fout het voorgekom - geen geldige toestelle om die nuwe lêerstelsels op "
+"te skep, is gevind nie. Deursoek asb. die hardeware vir die oorsaak."
-#: ../../Xconfig/card.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Choose an X server"
-msgstr "Kies 'n X-bediener"
+msgid "Starting the printing system at boot time"
+msgstr "Watter drukkerstelsel verlang u?"
-#: ../../Xconfig/card.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "X server"
-msgstr "X-bediener"
+msgid "Do you want to start the connection at boot?"
+msgstr "Wil u die konneksie met herlaaityd aanskakel?"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "64 MB or more"
-msgstr "64MB of meer"
+msgid "Processor ID"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "32 MB"
-msgstr "32 MB"
+msgid "Sound trouble shooting"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "16 MB"
-msgstr "16 MB"
+msgid "Polish (qwerty layout)"
+msgstr "Pools (QWERTY uitleg)"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "8 MB"
-msgstr "8 MB"
+msgid "activate now"
+msgstr "Aktiveer nou dadelik"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "4 MB"
-msgstr "4 MB"
+msgid ""
+"\n"
+"Drakbackup activities via CD:\n"
+"\n"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "2 MB"
-msgstr "2 MB"
+msgid ""
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "1 MB"
-msgstr "1 MB"
+msgid "Host \"%s\", port %s"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "512 kB"
-msgstr "512 kB"
+msgid "This partition can't be used for loopback"
+msgstr "Hierdie partisie kan nie vir teruglus gebruik word nie."
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "256 kB"
-msgstr "256 kB"
+msgid "File already exists. Use it?"
+msgstr "Lêer bestaan alreeds. Moet dit gebruik word?"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
+msgid "received: "
msgstr ""
-"Behou die veranderinge?\n"
-"Huidige konfigurasie is:\n"
-"\n"
-"%s"
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Options"
-msgstr "Opsies"
-
-#: ../../Xconfig/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Test"
+msgid "Right Alt key"
msgstr ""
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Resolution"
-msgstr "Resolusie"
+msgid "the list of alternative drivers for this sound card"
+msgstr ""
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Monitor"
-msgstr "Monitor"
+msgid "Gateway"
+msgstr "Portaal"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Graphic Card"
-msgstr "Videokaart"
+msgid "Scanner sharing"
+msgstr "Druk"
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Vertical refresh rate"
-msgstr "Vertikale verfristempo"
+msgid "Tonga"
+msgstr ""
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Horisontale verfristempo"
+msgid "Tunisia"
+msgstr ""
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Die kritiese twee parameters is die vertikale verfristempo (die tempo\n"
-"waarteen die hele skerm verfris) en die horisontale sinkronisasietempo (die\n"
-"tempo waarteen die horisontale skandeerlyne vertoon word). Lg. is die\n"
-"belangrikste.\n"
-"\n"
-"Dit is BAIE BELANGRIK dat u nie 'n sinkronisasie bereik buite dié van u\n"
-"monitor spesifiseer nie, dit kan die monitor beskadig. Indien u twyfel,\n"
-"kies konservatief."
+msgid "Profile: "
+msgstr "Profiel:"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgid ""
+"Click on a device in the left tree in order to display its information here."
msgstr ""
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Vendor"
-msgstr "Herroep"
-
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Plug'n Play"
+msgid "XawTV isn't installed!"
msgstr ""
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose a monitor"
-msgstr "Kies 'n monitor"
+msgid ""
+"Create/Transfer\n"
+"backup keys for SSH"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Graphics card: %s"
-msgstr "Videokaart: %s"
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Kies die resolusie en kleurdiepte"
+msgid "old static device name used in dev package"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Resolutions"
-msgstr "Resolusies"
+msgid "This label is already used"
+msgstr "Hierdie etiket is alreeds in gebruik"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 biljoen kleure (32 bis)"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16-miljoen kleure (24 bis)"
+msgid "After formatting partition %s, all data on this partition will be lost"
+msgstr "Alle data om partisie %s sal uitgewis word met formatering."
-#: ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65-duisend kleure (16 bis)"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connection Time: "
+msgstr "Konneksietipe:"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32-duisend kleure (15 bis)"
+msgid "select perm file to see/edit"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 kleure (8 bis)"
+msgid ""
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
+msgstr ""
+"Dit asb. die instasllasie CDROM in die aandrywer en druk OK. Indien u nie\n"
+"hieroor beskik nie, druk Kanselleer om die intydse opgradering te vermy."
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Is this the correct setting?"
-msgstr "Is dit korrek?"
+msgid "Use group id for execution"
+msgstr "Gebruik outobespeuring"
-#: ../../Xconfig/test.pm:1
-#, fuzzy, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d sekondes"
+#: ../../any.pm:1
+#, c-format
+msgid "Choose the default user:"
+msgstr "Kies die verstek gebruiker:"
-#: ../../Xconfig/test.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
+msgid "Gabon"
msgstr ""
-#: ../../Xconfig/test.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Waarskuwing: Toetsing is gevaarlik met hierdie videokaart"
-
-#: ../../Xconfig/test.pm:1
-#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Wil u die konfigurasie toets?"
+msgid ""
+"\n"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
+msgstr ""
+"\n"
+"Met 'n eksterne CUPS-bediener, hoef u glad nie 'n drukker hier\n"
+"op te stel nie; drukkers wod outomaties bespeur.\n"
+"Indien u twyfel, kies \"Eksterne CUPS-drukker\"."
-#: ../../Xconfig/test.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Test of the configuration"
-msgstr "Toets konfigurasie"
+msgid ""
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
+msgstr "U kan ander tale selekteer wat na installasie beskikbaar sal wees."
-#: ../../Xconfig/various.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, fuzzy, c-format
-msgid "What norm is your TV using?"
-msgstr "Watter tipe is u ISDN-konneksie?"
+msgid "Domain"
+msgstr "NIS-domein"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "Presiese RAM grootte indien nodig (%d MB bespeur)"
+
+#: ../../help.pm:1
#, c-format
msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
"\n"
-"Do you have this feature?"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
-msgstr ""
-"Ek kan u rekenaar so opstel om X outomaties te laai.\n"
-"Wil u X begin met 'n herlaai?"
+msgid "Provider dns 2 (optional)"
+msgstr "Voorsiener DNS 2 (opsioneel)"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Graphical interface at startup"
-msgstr "X met herlaai"
+msgid "Boot device"
+msgstr "Herlaaitoestel"
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86-drywer: %s\n"
+msgid "Which partition do you want to resize?"
+msgstr "Watter partisie se grootte wil u verander?"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 bediener: %s\n"
+msgid "United States Minor Outlying Islands"
+msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resolusie: %s\n"
+msgid "A tool to monitor your logs"
+msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Djibouti"
+msgstr "Aborteer"
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Color depth: %s\n"
-msgstr "Kleurdiepte: %s\n"
+msgid "detected on port %s"
+msgstr "Op poort %s bespeur"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Video geheue: %s kB\n"
+msgid "LPD"
+msgstr "LPD"
#: ../../Xconfig/various.pm:1
#, c-format
msgid "Graphics card: %s\n"
msgstr "Videokaart: %s\n"
-#: ../../Xconfig/various.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitor VertVerfris: %s\n"
+msgid "Yaboot"
+msgstr "Yaboot"
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitor HoriSink: %s\n"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you are using a DVDRAM device"
+msgstr "Kliek asb. op 'n partisie"
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Splash selection"
+msgstr "Stoor pakketseleksie"
-#: ../../Xconfig/various.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Muistoestel: %s\n"
+msgid "Extended partition not supported on this platform"
+msgstr "Ekstensiepartisie word nie op hierdie platform ondersteun nie"
-#: ../../Xconfig/various.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Muistipe: %s\n"
+msgid "ISDN Configuration"
+msgstr "ISDN Konfigurasie"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "high"
+msgstr "Hoog"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Sleutelbord uitleg: %s\n"
+msgid "Internet Connection Sharing"
+msgstr "Internetkonneksiedeling"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Options: %s"
-msgstr "Opsies: %s"
+msgid "Choose file"
+msgstr ""
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Mount point: "
-msgstr "Hegpunt:"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
+msgstr ""
+"Waarskuwing! 'n Bestaande vuurmuurkonfigurasie is bespeur. U sal dalk na "
+"dietyd self regstellings moet aanbring."
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Server: "
-msgstr "Bediener"
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "Netwerk op pad af"
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The URL must begin with http:// or https://"
+msgid ""
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
msgstr ""
-#
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Toets asb. die muis"
-
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Mount point"
-msgstr "Hegpunt"
+msgid "Printer default settings"
+msgstr "Drukkermodelkeuse"
-#: ../../diskdrake/dav.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Server"
-msgstr "Bediener"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Generiese PS2 wielmuis"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Mount"
-msgstr "Heg"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Removing old printer \"%s\"..."
+msgstr "Drukkerdata word gelees..."
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Unmount"
-msgstr "Ontheg"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Select a device !"
+msgstr "Selekteer 'n videokaart"
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "New"
-msgstr "nuut"
+msgid "Remove selected server"
+msgstr "Verwyder tou"
-#: ../../diskdrake/dav.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+msgid "French Southern Territories"
msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Gebruik ``%s'' instede."
-
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Type"
-msgstr "Tipe"
+msgid "the vendor name of the processor"
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Gebruik ``Ontheg'' eerste"
+msgid "All data on this partition should be backed-up"
+msgstr "Alle data om hierdie partisie moet gerugsteun word."
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Delete"
-msgstr "Uitwis"
+msgid "Installing package %s"
+msgstr "Installeer pakket %s"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create"
-msgstr "Skep"
+msgid "Checking device and configuring HPOJ..."
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Filesystem types:"
-msgstr "LOersteltipes:"
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
+msgstr ""
+"Om meer partisies te verkry, verwyder asb. een om 'n ektensiepartisiete kan "
+"skep"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Empty"
-msgstr "Leeg"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
-msgid "Windows"
-msgstr "NIS-domein"
+msgid ""
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "Choose packages to install"
+msgstr "Kies pakkette om te installeer"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid ""
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Swap"
-msgstr "Ruilarea"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
-msgid "Journalised FS"
-msgstr "Gejoernaliseer"
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr "Alle bestaande partisies en data sal uitgewis word op skyf %s"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Ext2"
-msgstr "Ext2"
+msgid ""
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
+msgstr ""
+"U stelsel het nie genoeg plek vir 'n installasie of opgradering nie (%d > %d)"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "No hard drives found"
-msgstr "Plaaslike drukker"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
+msgstr ""
+"Elke drukker benodig naam (bv. lp).\n"
+"Die Beskrywing- en Liggingvelde is opsioneel.\n"
+"Hulle dien as inligting vir gebruikers."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Please click on a partition"
-msgstr "Kliek asb. op 'n partisie"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
msgstr ""
-"U het een massiewe FAT partisie. \n"
-"(gewoonlik deur DOS/Windows gebruik)\n"
-"Ek stel voor u verstel eers die grootte van dié partisie\n"
-"(kliek daarop en kliek dan op \"Verstel Grootte\")"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose action"
-msgstr "Kies aksie"
+msgid "Bhutan"
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Wizard"
-msgstr "Assistent"
+msgid "Network interface"
+msgstr "Netwerkkoppelvlak"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Indien u beplan om 'aboot' te gebruik, los spasie aan die begin\n"
-"van die skyf. (2048 sektors is genoeg)."
+msgid "Reading printer data..."
+msgstr "Drukkerdata word gelees..."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Rugsteun u data eers asb."
+msgid "Korean keyboard"
+msgstr "Koreaanse sleutelbord"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Read carefully!"
-msgstr "Lees noukeurig!"
+msgid "Not connected"
+msgstr "Nie gekonnekteer nieKabelkonneksie"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Encryption key (again)"
-msgstr ""
+msgid "Greek"
+msgstr "Grieks"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "The encryption keys do not match"
-msgstr "Die wagwoorde stem nie ooreen nie."
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
msgstr ""
-"Hierdie wagwoord is te eenvoudig. Dit moet ten minste %d karakters bevat."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose your filesystem encryption key"
+msgid "Saint Kitts and Nevis"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Filesystem encryption key"
-msgstr "LOerstelseltipe: "
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Type: "
-msgstr "Tipe:"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "on channel %d id %d\n"
-msgstr "op bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partisietabeltipe: %s\n"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-skywe %s\n"
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Info: "
-msgstr "Info:"
+msgid "Enable OF Boot?"
+msgstr "Laat OF-herlaai toe?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrie: %s silinders, %s koppe, %s sektore\n"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "U kan nie JFS vir partisies kleiner as 16MB gebruik nie"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Size: %s\n"
-msgstr "Grootte: %s\n"
+msgid "Monitor VertRefresh: %s\n"
+msgstr "Monitor VertVerfris: %s\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Read-only"
+msgid "path"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Device: "
-msgstr "Toestel:"
+msgid "Mount point"
+msgstr "Hegpunt"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
msgstr ""
-"\n"
-"Hierdie spesiale herlaaipartisie\n"
-"is om u stelsel te duolaai.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
+msgid "Restore system"
+msgstr "Installeer stelsel"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
msgstr ""
-"\n"
-"Dis hoogs waarskynlik dat hierdie partisie\n"
-"drywerpartisie is en verkieslik alleen gelos\n"
-"moet word.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Loopback file name: %s"
-msgstr "Teruglus lêernaam: %s"
+msgid "The DHCP end ip"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-skywe %s\n"
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Another one"
+msgstr "Internet"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Chunk size %s\n"
-msgstr "Blokgrootte %s\n"
+msgid "Drakbackup"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Level %s\n"
-msgstr "Vlak %s\n"
+msgid "Colombia"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
+"Current configuration of `%s':\n"
+"\n"
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
msgstr ""
-"Verstekpartisie vir herlaai\n"
-" (vir MS_DOS doeleindes, nie LILO s'n nie)\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr "Teruglus lêer(s): %s\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+msgid "Plug'n Play"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Mounted\n"
-msgstr "Geheg\n"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Reunion"
+msgstr "Resolusie"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Not formatted\n"
-msgstr "Nie geformatter\n"
+msgid "Details"
+msgstr "Detail"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "For security reasons, it will be disconnected now."
+msgstr "Vir sekuriteitsredes, word u nou gediskonnekteer."
+
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Formatted\n"
-msgstr "Geformateer\n"
+msgid "Synchronization tool"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Silinder %d na silinder %d\n"
+msgid "Checking your system..."
+msgstr "Watter drukkerstelsel verlang u?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektore"
+msgid "Print"
+msgstr "Druk"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Size: %s"
-msgstr "Grootte: %s"
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Start: sector %s\n"
-msgstr "Begin: sektor %s\n"
+msgid "Mongolia"
+msgstr ""
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Name: "
-msgstr "Naam: "
+msgid "Mounted\n"
+msgstr "Geheg\n"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS-skyfletter: %s ('n raaiskoot)\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Graphical Interface"
+msgstr "X met herlaai"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore Users"
+msgstr "Herstel vanaf lêer"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "LPD word verwyder..."
+msgid "Encryption key for %s"
+msgstr "Die wagwoorde stem nie ooreen nie."
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Copying %s"
+msgid ""
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
+"Portmapper bestuur RPC-konneksies wat deur protokolle soos NFS en NIS\n"
+"gebruik word. Portmap moet loop op rekenaars wat as bedieners vir hierdie\n"
+"protokolle, en ander protokolle wat die RPC meganisme gebruik, dien."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Moving files to the new partition"
-msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
+msgid "Detected hardware"
+msgstr "Sien hardeware inligting"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Mauritius"
+msgstr "Verskeie"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+msgid "Myanmar (Burmese)"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, fuzzy, c-format
-msgid "Hide files"
-msgstr "mkraid het gefaal"
+msgid "Enabling swap partition %s"
+msgstr "Partisie %s word formateer"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, fuzzy, c-format
-msgid "Move files to the new partition"
-msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgstr ""
+"Daar is geen FAT partisies om te verander of om as teruglus (nie genoeg "
+"spasie nie) te gebruik nie"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Alle data om partisie %s sal uitgewis word met formatering."
+msgid "Armenian (old)"
+msgstr "Armenies (oud)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "U sal moet herlaai voor die veranderinge geaktiveer kan word"
+msgid ""
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Partisietabel van skyf %s gaan opdateer word!"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "The package %s is needed. Install it?"
+msgid ""
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
msgstr ""
-"Hierdie pakket moet opgradeer word\n"
-"Is u seker u wil dit deselekteer?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "What type of partitioning?"
-msgstr "Watter tipe van partisionering?"
+msgid ", host \"%s\", port %s"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Wees versigtig: hierdie is 'n gevaarlike operasie"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Monaco"
+msgstr "Monitor"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "chunk size"
-msgstr "blokgrootte"
+msgid "%s formatting of %s failed"
+msgstr "%s formatering ban %s het gefaal"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "level"
-msgstr "vlak"
+msgid "Partitioning failed: %s"
+msgstr "Partisionering het misluk: %s"
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
-#, c-format
-msgid "device"
-msgstr "toestel"
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "Canada (cable)"
+msgstr "Kanadees (Quebec)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Upgrade"
+msgstr "Opgradeer"
+
+#: ../../help.pm:1
#, c-format
-msgid "Various"
-msgstr "Verskeie"
+msgid "Workstation"
+msgstr "Werkstasie"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mount options"
-msgstr "Hegopsies:"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"Installeer nou pakket %s\n"
+"%d%%"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "File already exists. Use it?"
-msgstr "Lêer bestaan alreeds. Moet dit gebruik word?"
+msgid "Kyrgyzstan"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "Lêer word alreeds deur 'n ander teruglus gebruik,kies 'n ander een"
+msgid "With basic documentation"
+msgstr "dokumentasie"
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Give a file name"
-msgstr "Regte naam"
+#: ../../services.pm:1
+#, c-format
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anacron is skeduleerder vir periodiese instruksies."
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Filesystem type: "
-msgstr "LOerstelseltipe: "
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"U moet 'n wortelpartisie definieer.\n"
+"Skep 'n partisie of kliek op 'n bestaande een.\n"
+"Kies dan Hegpunt en stel dit dan '/'."
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Size in MB: "
-msgstr "Grootte in MB: "
+msgid "Proxy should be http://..."
+msgstr "Instaanbediener moet begin met http://"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Loopback file name: "
-msgstr "Teruglus lêernaam:"
+msgid "South Africa"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Loopback"
-msgstr "Teruglus"
+msgid "Western Sahara"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "Hierdie partisie kan nie vir teruglus gebruik word nie."
+msgid "Etherboot Floppy/ISO"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "LVM name?"
-msgstr "LVM naam?"
+msgid "Modify printer configuration"
+msgstr "Verander drukkerkonfigurasie"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "new"
-msgstr "nuut"
+msgid "Choose a partition"
+msgstr "Kies 'n partisie"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Kies 'n bestaande LVM om by toe te voeg"
+msgid "Edit current rule"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Kies 'n bestaande RAID om by toe te voeg"
+msgid "%s"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Moving partition..."
-msgstr "Partisie word verskuif..."
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#
+#: ../../mouse.pm:1
#, c-format
-msgid "Moving"
-msgstr "Verskuiwing"
+msgid "Please test the mouse"
+msgstr "Toets asb. die muis"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Other Media"
+msgstr "Ander"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup system files"
+msgstr "Korrupte rugsteunlêer"
+
+#: ../../mouse.pm:1
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "Na watter sektor wil u skuif?"
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Sector"
msgstr "Sektor"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "Na watter skyf wil u skuif?"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Move"
-msgstr "Skuif"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Qatar"
+msgstr "Toestand"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "New size in MB: "
-msgstr "Nuwe grootte in MB: "
+msgid "LDAP Base dn"
+msgstr "LDAP Basis-dn"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Choose the new size"
-msgstr "Kies die nuwe grootte"
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr ""
+"U kan nie hierdie pakket selekteer nie, omdat daar nie meer spasie "
+"beskikbaar is nie"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Resize"
-msgstr "Verstel Grootte"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "generate auto-install floppy"
+msgstr "Skep outoinstallasieskyf"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Alle data om partisie %s sal uitgewis word met die grootteverandering"
+msgid "Dialing mode"
+msgstr "Belmetode"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Alle data om hierdie partisie moet gerugsteun word."
+msgid "File sharing"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "This partition is not resizeable"
-msgstr "Hierdie partisie se greootte kan nie verstel word nie"
+msgid "Clean /tmp at each boot"
+msgstr "Maak /tmp skoon met elke herlaai"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "FAT lêerstelselgrense word bereken"
+msgid "Malawi"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Where do you want to mount %s?"
-msgstr "Waar wil u toestel %s heg?"
+msgid "Please choose your type of mouse."
+msgstr "Wat is u muistoestel?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "class of hardware device"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
msgstr ""
-"Kan nie hegpunt ontset nie, omdat hierdie partisie vir teruglus\n"
-"gebruik word. Verwyder eers die teruglus."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Waar wil u toestel %s heg?"
+msgid "United Kingdom"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "Waar wil u terugluslêer %s heg?"
+#: ../../services.pm:1
+#, c-format
+msgid "running"
+msgstr "aktief"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "Oorskakeling van ext2 na ext3"
+msgid "default"
+msgstr "verstek"
-#
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Indonesia"
+msgstr "niks"
+
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "France [SECAM]"
+msgstr "Frankryk"
+
+#: ../../any.pm:1
#, c-format
-msgid "Which filesystem do you want?"
-msgstr "Watter lêerstelsel verlang u?"
+msgid "restrict"
+msgstr "beperk"
-#: ../../diskdrake/interactive.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Change partition type"
-msgstr "Verander partisietipe"
+msgid "must have"
+msgstr "benodig"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
msgstr ""
-"Alle data om hierdie partisie %s sal uitgewis word na verandering van die "
-"partisietipe"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Remove the loopback file?"
-msgstr "Terugluslêer %s word geformateer"
+msgid "Senegal"
+msgstr "Aktiveer"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Command line"
+msgstr "Domeinnaam"
+
+#: ../../share/advertising/08-store.pl:1
#, c-format
msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Preference: "
-msgstr "Voorkeure: "
+msgid "access to administrative files"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Start sector: "
-msgstr "Kies sektor: "
+msgid ""
+"Error during sendmail.\n"
+" Your report mail was not sent.\n"
+" Please configure sendmail"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Create a new partition"
-msgstr "Kies 'n nuwe grootte"
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Use for loopback"
-msgstr "Gebruik vir teruglus"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Modify RAID"
-msgstr "Verander RAID"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Montserrat"
+msgstr "Muispoort"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Remove from LVM"
-msgstr "Verwyder uit LVM"
+msgid "Automatic dependencies"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Remove from RAID"
-msgstr "Verwyder uit RAID"
+msgid "Swap"
+msgstr "Ruilarea"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Add to LVM"
-msgstr "Voeg by LVM"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connecting to the Internet "
+msgstr "Konnekteer aan die internet"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Add to RAID"
-msgstr "Voeg by RAID"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore Other"
+msgstr "Herstel vanaf lêer"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Format"
-msgstr "Formatteer"
+msgid "TV card"
+msgstr "TV-kaaer"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Detailed information"
-msgstr "Gedetaileerde inligting"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "Eksterne SMB/Windows 95/98/NT-drukker"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Trying to rescue partition table"
-msgstr "Partisietabel Reddingspoging"
+msgid ", "
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
msgstr ""
-"Sit 'n floppie in die aandrywer.\n"
-"Alle data op hierdie floppie sal verloor word."
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Warning"
-msgstr "Waarskuwing"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove selected host/network"
+msgstr "Verwyder tou"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
+msgstr ""
+"POstfix is 'n E-posoordragagent (MTA). Dit is die program wat E-pos\n"
+"van een bediener na 'n ander oordra."
+
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Select file"
-msgstr "Selekteer lOer"
+msgid "Disconnection from the Internet failed."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
msgstr ""
-"Die rugsteunpartisietabel het nie dieselfde grootte nie\n"
-"Wil u voortgaan?"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Removable media automounting"
-msgstr "Verwyderbare media"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "Reload partition table"
-msgstr "Reddingspartisietabel"
+msgid "Network Hotplugging"
+msgstr "Netwerkkonfigurasie"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Rescue partition table"
-msgstr "Reddingspartisietabel"
+msgid "if set to yes, reports check result to tty."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Restore partition table"
-msgstr "Reddingspartisietabel"
+msgid "Restore From CD"
+msgstr "Herstel vanaf floppie"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Save partition table"
-msgstr "Skryf partisietabel"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-"Om meer partisies te verkry, verwyder asb. een om 'n ektensiepartisiete kan "
-"skep"
+"Nou dat u internetkonfigurasie opgestel is,\n"
+"moet u die rekenaar opstel om dit te deel.\n"
+"LW: U benodig 'n ware netwerkkaart om 'n lokalearea netwerk (LAN) op te "
+"stel.\n"
+"\n"
+"Wil u internetdeling opstel?\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "I can't add any more partition"
-msgstr "Ek kan nie meer partisies byvoeg nie"
+msgid ""
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr "Kies asb. die netwerkkoppelvlak wat u wil gebruik vir die internet."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "All primary partitions are used"
-msgstr "Alle primêre partisies is gebruik"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Hard drive information"
-msgstr "Hardeskyfinligting"
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Auto allocate"
-msgstr "Outo-allokeer"
+msgid "Internet Connection Sharing is now disabled."
+msgstr "Internetkonneksiedeling is gedeaktiveer"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Clear all"
-msgstr "Verwydeer almal"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Wil u die /etc/fstab veranderinge stoor?"
+msgid "Latin American"
+msgstr "Latyns-Amerikaans"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Wil u verlaat, sonder om die partisietabel op te dateer?"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Japanese text printing mode"
+msgstr "Stel netwerk op"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Quit without saving"
-msgstr "Verlaat, maar moenie iets stoor nie"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Old device file"
+msgstr "Selekteer lOer"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Continue anyway?"
-msgstr "Wil u in elk geval voortgaan?"
+msgid "Info: "
+msgstr "Info:"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Toggle to expert mode"
-msgstr "Skakel oor na kundige gebruiksvlak"
+#: ../../interactive/stdio.pm:1
+#, fuzzy, c-format
+msgid "Button `%s': %s"
+msgstr "Opsies: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Toggle to normal mode"
-msgstr "Skakel oor na normale gebruiksvlak"
+msgid "Please wait"
+msgstr "Wag asb."
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Undo"
-msgstr "Herroep"
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Exit"
-msgstr "Verlaat"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "None"
+msgstr "Klaar"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Choose a partition"
-msgstr "Kies 'n partisie"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The entered IP is not correct.\n"
+msgstr "Is dit korrek?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose another partition"
-msgstr "Kies 'n ander partisie"
+msgid "Ethernet Card"
+msgstr "Ethernetkaart"
-#: ../../diskdrake/removable.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Change type"
-msgstr "Verander tipe"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Search servers"
-msgstr "DNS bediener"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Domain"
-msgstr "NIS-domein"
+msgid "Info"
+msgstr "Info"
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Username"
-msgstr "Gebruikerskode"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#, c-format
+msgid "Install"
+msgstr "Installasie"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Please enter your username, password and domain name to access this host."
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
msgstr ""
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Domain Authentication Required"
-msgstr "Magtiging"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Another one"
-msgstr "Internet"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Which username"
-msgstr "Gebruikerskode"
+#: ../../steps.pm:1
+#, c-format
+msgid "Exit install"
+msgstr "Verlaay installasie"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Can't login using username %s (bad password?)"
+msgid ""
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
msgstr ""
-#: ../../harddrake/data.pm:1
+#
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "cpu # "
-msgstr ""
+msgid "Remote CUPS server"
+msgstr "Verwyder CUPS-bediener"
-#: ../../harddrake/data.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "SMBus controllers"
-msgstr ""
+msgid "Sun - Mouse"
+msgstr "Sun - Muis"
-#: ../../harddrake/data.pm:1
+#
+#: ../../standalone/drakgw:1
#, c-format
-msgid "USB controllers"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
msgstr ""
+"Daar is net een konfigureerde netwerkkaart op u stelsel.\n"
+"\n"
+"%s\n"
+"\n"
+"Ek gaan nou u LAN met daardie kaart opstel."
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "SCSI controllers"
-msgstr ""
+msgid "Minimal install"
+msgstr "Minimale installasie"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Ethiopia"
+msgstr "Estoniaans"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "Firewire controllers"
+msgid "Devanagari"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "(E)IDE/ATA controllers"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Joystick"
-msgstr ""
+msgid "Total size: %d / %d MB"
+msgstr "Totale grootte: %d / %d MB"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Scanner"
-msgstr "Selekteer 'n videokaart"
+msgid "disabled"
+msgstr "deaktiveer"
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Unknown/Others"
-msgstr "Generies"
+msgid "Search for new scanners"
+msgstr "Plaaslike drukker"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Bridges and system controllers"
-msgstr ""
+msgid "Disabling servers..."
+msgstr "Bedieners word gedeaktiveer..."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Modem"
-msgstr "Muis"
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr "Kies die pakkette wat u wil installeer"
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Ethernetcard"
-msgstr "Ethernetkaart"
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Installation of %s failed. The following error occured:"
+msgstr "%s installasie het gefaal a.g.v. hierdie fout: "
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Processors"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Webcam"
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
msgstr ""
-#: ../../harddrake/data.pm:1
+#
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Soundcard"
-msgstr "Klankkaart"
+msgid "Network printer (TCP/Socket)"
+msgstr "Netwerkdrukker (sok)"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Other MultiMedia devices"
-msgstr "Ander"
+msgid "Backup User files..."
+msgstr "Korrupte rugsteunlêer"
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Tvcard"
-msgstr "TV-kaaer"
+#: ../../steps.pm:1
+#, c-format
+msgid "Install system"
+msgstr "Installeer stelsel"
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Videocard"
-msgstr "Videomodus"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "First DNS Server (optional)"
+msgstr "Eerste DNS-bediener (opsioneel)"
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Alternatively, you can specify a device name/file name in the input line"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Tape"
-msgstr "Tipe"
+msgid "dhcpd Config..."
+msgstr "Konfigurasie in aabou..."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "DVD-ROM"
-msgstr ""
+msgid "The setup has already been done, but it's currently disabled."
+msgstr "Die opstelling van is alreeds gedoen, maar is tans gedeaktiveer."
-#: ../../harddrake/data.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "CD/DVD burners"
-msgstr ""
+msgid "LILO/grub Installation"
+msgstr "LILO/grub installasie"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "CDROM"
-msgstr ""
+msgid "Israeli"
+msgstr "Israelies"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Disk"
-msgstr "Deens"
+msgid "load setting"
+msgstr "Formatering"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "Netwerk op pad af"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Zip"
+msgid "Floppy can be removed now"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Floppy"
-msgstr "Stoor op floppie"
+msgid "Truly minimal install"
+msgstr "Minimale installasie"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Let me pick any driver"
+msgid "Denmark"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving partition..."
+msgstr "Partisie word verskuif..."
+
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Driver:"
-msgstr "Drywer"
+msgid "(This) DHCP Server IP"
+msgstr "CUPS-bediener IP:"
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
+msgid "Test of the configuration"
+msgstr "Toets konfigurasie"
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing %s ..."
+msgstr "Installeer pakket %s"
-#: ../../harddrake/sound.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sound trouble shooting"
+msgid "Choose your filesystem encryption key"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgid ""
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Unkown driver"
-msgstr "Onbekende model"
+msgid "Andorra"
+msgstr "Herroep"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "There's no known driver for your sound card (%s)"
+msgid "Sierra Leone"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Botswana"
+msgstr "Estoniaans"
+
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "(default value: %s)"
+msgstr " (Verstek)"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No known driver"
-msgstr ""
+msgid "Alternative test page (Letter)"
+msgstr "Alternatiewe toetsbladsy (Lettergrootte)"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
+"DHCP Server Configuration.\n"
+"\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
+"\n"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid "Choose an X server"
+msgstr "Kies 'n X-bediener"
+
+#: ../../install_interactive.pm:1
#, c-format
-msgid "No open source driver"
+msgid "Swap partition size in MB: "
+msgstr "Ruilpartisiegrootte in MB: "
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"Other (not drakbackup)\n"
+"keys in place already"
msgstr ""
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "No changes to backup!"
+msgstr "Korrupte rugsteunlêer"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Wag asb... Konfigurasie word toegpas"
+msgid "Formatted\n"
+msgstr "Geformateer\n"
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Type of install"
+msgstr "Kies pakket om te installeer"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "Eksterne SMB/Windows 95/98/NT-drukker"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The old \"%s\" driver is blacklisted.\n"
"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
+"- Daemon (%s) include:\n"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Trouble shooting"
+msgid "%d comma separated numbers"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
msgstr ""
+"Die 'rusers' protokol laat netwerkgebruikers toe om te bepaal wie\n"
+"aangeteken is op ander samewerkende rekenaars."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakautoinst:1
+#, c-format
+msgid "Automatic Steps Configuration"
+msgstr "Outomatiese Stappe Konfigurasie"
+
+#: ../../share/advertising/02-community.pl:1
#, c-format
msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
+msgid "Barbados"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Sound configuration"
-msgstr "Konfigurasie"
+msgid "Please select data to backup..."
+msgstr "Kies asb. 'n taal om te gebruik."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "No alternative driver"
+msgid "received"
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "enable radio support"
-msgstr ""
+msgid "/File/_New"
+msgstr "/Lêer/_Nuut"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The DNS Server IP"
+msgstr "CUPS-bediener IP:"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Radio support:"
+msgid "IP Range End:"
msgstr ""
-#: ../../harddrake/v4l.pm:1
-#, fuzzy, c-format
-msgid "PLL setting:"
-msgstr "Formatering"
+#: ../../security/level.pm:1
+#, c-format
+msgid "High"
+msgstr "Hoog"
-#: ../../harddrake/v4l.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "number of capture buffers for mmap'ed capture"
+msgid "NoVideo"
+msgstr "Geen video"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "this field describes the device"
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Number of capture buffers:"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Tuner type:"
-msgstr "Verander tipe"
+msgid "Local Printers"
+msgstr "Plaaslike drukker"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "Card model:"
-msgstr "Kaartgeheue (DMA)"
+msgid "Installation image directory"
+msgstr "Xpmac (installasievertoondrywer)"
-#: ../../harddrake/v4l.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
+msgid "NIS Server"
+msgstr "NIS-bediener"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Unknown|Generic"
-msgstr "Generies"
+msgid "Port: %s"
+msgstr "Poort"
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Spain"
+msgstr "Spaans"
+
+#: ../../any.pm:1
#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr ""
+msgid "This user name has already been added"
+msgstr "Hierdie genruikerskode bestaan alreeds"
-#: ../../harddrake/v4l.pm:1
+#: ../../interactive.pm:1
#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr ""
+msgid "Choose a file"
+msgstr "Kies 'n lêer"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Apply"
+msgstr "Pas toe"
+
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Auto-detect"
+msgid "Auto-detect available ports"
msgstr "Gebruik outobespeuring"
-#: ../../interactive/newt.pm:1
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Internet Connection Sharing currently disabled"
+msgstr "Internetkonneksiedeling is gesper"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "San Marino"
+msgstr ""
+
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, fuzzy, c-format
-msgid "Do"
-msgstr "Klaar"
+msgid "Belgium"
+msgstr "Belgies"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Kuwait"
+msgstr "Verlaat"
+
+#
+#: ../../any.pm:1
#, c-format
-msgid "Your choice? (default %s) "
-msgstr "U keuse? (verstek %s) "
+msgid "Choose the window manager to run:"
+msgstr "Kies die vensterbestuurder om te loop:"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Swak keuse, probeer weer\n"
+msgid "sub generation of the cpu"
+msgstr ""
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Re-submit"
+msgid "First Time Wizard"
msgstr ""
-#: ../../interactive/stdio.pm:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"=> Notice, a label changed:\n"
-"%s"
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
msgstr ""
+"'n Fout het plaasgevind en ek weet nie hoe om dit veilig te hanteer\n"
+"nie. Gaan op u eie risiko voort."
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
+msgid "please wait, parsing file: %s"
msgstr ""
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Taiwan"
+msgstr "Latvies"
+
+#: ../../lang.pm:1
#, c-format
-msgid "=> There are many things to choose from (%s).\n"
+msgid "Pakistan"
msgstr ""
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
+msgstr ""
+
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "U keuse? (verstek %s) "
+msgid "Permissions"
+msgstr "Weergawe: %s\n"
-#: ../../interactive/stdio.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid " enter `void' for void entry"
+msgid "Provider name (ex provider.net)"
+msgstr "Voorsienernaam (bv voorsiener.co.za)"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Version: %s\n"
+msgstr "Weergawe: %s\n"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid ""
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
+"U stelsel het min hulpbronne beskikbaar. U mag dalk probleme ondervind met "
+"die installering\n"
+"van Mandrake Linux. In so 'n geval probeer eerder die teksinstallasie. "
+"Daarvoor moet u\n"
+"'F1' druk wanneer u vanaf die CDROM herlaai en dan 'text' op die "
+"instruksielyn intik."
-#: ../../interactive/stdio.pm:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Use the Windows partition for loopback"
+msgstr "Gebruik vir die Windows-partisie vir teruglus"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Armenian (typewriter)"
+msgstr "Armenies (tikmasjien)"
+
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Connection type: "
+msgstr "Konneksietipe:"
+
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Do you want to click on this button?"
-msgstr "Wil u aboot gebruik?"
+msgid "Graphical interface"
+msgstr "X met herlaai"
-#: ../../interactive/stdio.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#, c-format
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s met 3D-hardwareversnelling"
+
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Opsies: %s"
+msgid "India"
+msgstr "Iranies"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Chad"
+msgstr ""
+
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "U keuse? (verstek %s) "
+msgid "Slovakia"
+msgstr "Sloveens"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
+msgid "Singapore"
msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
+msgid "Cambodia"
msgstr ""
-"Laai van module %s het gefaal.\n"
-"Wil u ander parameters probeer?"
-#: ../../modules/interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Specify options"
-msgstr "Spesifieer opsies"
+msgid "Monitor HorizSync: %s\n"
+msgstr "Monitor HoriSink: %s\n"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Autoprobe"
-msgstr "Aftas"
+msgid "Path"
+msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
msgstr ""
-"In sekere gevalle sal die %s drywer ekstra inligting benodig, alhoewel in\n"
-"meeste gevalle dit nie nodig wees nie. Wil u ekstra opsies voorsien od moet\n"
-"rekenaar self daarvoor aftas. In uitsonderlike gevalle mag die rekenaar\n"
-"ophang, maar dit sal nie skade veroorsaak nie."
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Watter %s drywer meot ek probeer?"
+msgid ""
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
+msgstr ""
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Module options:"
-msgstr "Module opsies:"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Printer %s\n"
+"What do you want to modify on this printer?"
+msgstr ""
+"Drukker %s: %s %s\n"
+"Wil u hierdie drukker verander?"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Add host"
+msgstr "Voeg gebruiker by"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
+"\n"
+"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
-"U kan noue die opsies voorsien vir module %s.\n"
-"Opsies is in die formaat ``naam=waarde naam2=waarde2 ...''.\n"
-"Bv. ``io=0x300 irq-7''"
-#: ../../modules/interactive.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
+"\n"
+"\"Custom\" permit a per-user granularity.\n"
msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "(module %s)"
-msgstr "(module %s)"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
+msgstr ""
+"Kies asb. die laai of stoor pakketkeuse op die floppie.\n"
+"Die formaat is dieselfde as outoinstallasie-genereerde floppies."
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Drywer vir %s kaart %s in installasieproses"
+msgid "China (broadcast)"
+msgstr ""
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "See hardware info"
-msgstr "Sien hardeware inligting"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use quota for backup files."
+msgstr "Korrupte rugsteunlêer"
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Configuring printer \"%s\"..."
+msgstr "Konfigureer drukker"
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Het u enige %s koppelvlakke?"
+msgid "Internet connection"
+msgstr "Internetkonneksie"
#: ../../modules/interactive.pm:1
#, c-format
-msgid "Do you have another one?"
-msgstr "Beskik u oor nog?"
+msgid ""
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
+msgstr ""
+"Laai van module %s het gefaal.\n"
+"Wil u ander parameters probeer?"
-#: ../../modules/interactive.pm:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Het %s %s koppelvlakke gevind"
+msgid "Welcome to the Open Source world."
+msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You can configure each parameter of the module here."
+msgid "Bosnia and Herzegovina"
msgstr ""
-#: ../../modules/parameters.pm:1
+#: ../../fsedit.pm:1
#, fuzzy, c-format
-msgid "comma separated strings"
-msgstr "Formateer partisies"
+msgid ""
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
+msgstr "U benodig 'n ware lêerstelsel (ext2, reiserfs) vir hierdie hegpunt\n"
-#: ../../modules/parameters.pm:1
+#
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "You must enter a host name or an IP address.\n"
+msgstr "Toets asb. die muis"
+
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "comma separated numbers"
+msgid "Netherlands"
msgstr ""
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "Stoor in lêer"
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid "%d comma separated strings"
-msgstr ""
+msgid "Internal ISDN card"
+msgstr "Interne ISDN-kaart"
-#: ../../modules/parameters.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "%d comma separated numbers"
+msgid ""
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
msgstr ""
-#: ../../modules/parameters.pm:1
+#: ../../network/modem.pm:1
#, fuzzy, c-format
-msgid "a number"
-msgstr "Telefoonnommer"
+msgid "Title"
+msgstr "Tabel"
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
+msgid "Install & convert Fonts"
msgstr ""
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
+msgid "WARNING"
msgstr ""
-"Die mees algemene metode vir ADSL is om pppoe te gebruik.\n"
-"Daar is wel sekere konneksie wat pptp of DHCP gebruik.\n"
-"Indien u nie weet nie, kies 'gebruik pppoe'."
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
-#, c-format
-msgid "Connect to the Internet"
-msgstr "Konnekteer aan die internet"
-
-#: ../../network/adsl.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Sagem (using pppoa) usb"
-msgstr ""
+msgid "Installing bootloader"
+msgstr "Herlaaistelselinstallasie"
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Alcatel speedtouch usb"
-msgstr "speedtouch USB"
+msgid "replay"
+msgstr "Herspeel"
-#: ../../network/adsl.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "use dhcp"
-msgstr "gebruik dhcp"
+msgid "detected %s"
+msgstr "%s bespeur"
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "use pptp"
-msgstr "gebruik pptp"
+msgid "Virgin Islands (U.S.)"
+msgstr ""
-#: ../../network/adsl.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "use pppoe"
-msgstr "gebruik pppoe"
+msgid "Bad backup file"
+msgstr "Korrupte rugsteunlêer"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Other ports"
-msgstr "Toets poorte"
+msgid ""
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
+msgstr ""
+"Die opstelling van die Internetkonnkesiedeling is alreeds gedoen.\n"
+"Dis tans gedeaktiveer.\n"
+"\n"
+"Wat wil u doen?"
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Everything (no firewall)"
+msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Pipe into command"
+msgstr "Pyk drukstuk na program"
+
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
msgstr ""
+"Sekere hardeware op u rekenaar benodig geslote drywers.\n"
+" U kan inligting hieroorvind by %s"
-#: ../../network/drakfirewall.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
+msgid "Detecting devices..."
+msgstr "Toestel word afgetas..."
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Click here to launch the wizard ->"
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
+msgid "Haiti"
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"drakfirewall configurator\n"
+"Description of the fields:\n"
"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
+msgid "the name of the CPU"
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "No network card"
-msgstr "geen netwerkkaart gevind nie"
+msgid "Refreshing printer data..."
+msgstr "Drukkerdata word gelees..."
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid "POP and IMAP Server"
-msgstr "LDAP-bediener"
+#: ../../install2.pm:1
+#, c-format
+msgid "You must also format %s"
+msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Be careful: this operation is dangerous."
+msgstr "Wees versigtig: hierdie is 'n gevaarlike operasie"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Insert a floppy containing package selection"
+msgstr "Sit 'n floppie met die pakketkeuse in aandrywer "
+
+#: ../../diskdrake/dav.pm:1
#, fuzzy, c-format
-msgid "Mail Server"
-msgstr "Datbasis"
+msgid "Server: "
+msgstr "Bediener"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "Domain Name Server"
-msgstr "Domeinnaam"
+msgid "Security Alerts:"
+msgstr "Sekuriteitsvlak word gestel."
-#: ../../network/drakfirewall.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, fuzzy, c-format
-msgid "Web Server"
-msgstr "Bediener"
+msgid "Sweden"
+msgstr "Sien"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Zeroconf host name must not contain a ."
+msgid "Use Expect for SSH"
msgstr ""
-#
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Poland"
+msgstr "Yslandies"
+
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Host name"
-msgstr "Rekenaarnaam"
+msgid "Importance: %s\n"
+msgstr "Belangrikheid: %s\n"
-#
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Zeroconf Host name"
-msgstr "Rekenaarnaam"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr "Kies die pakkette wat u wil installeer"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
-msgstr ""
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "Other ports"
+msgstr "Toets poorte"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Configuring network"
-msgstr "Stel netwerk op"
+msgid "number of capture buffers for mmap'ed capture"
+msgstr ""
-#: ../../network/ethernet.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
-msgstr "Kies asb. die netwerkkoppelvlak wat u wil gebruik vir die internet."
+msgid "SMBus controllers"
+msgstr ""
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Choose the network interface"
-msgstr "Kies die netwerkkoppelvlak"
+msgid "Connection timeout (in sec)"
+msgstr "Konneksie tydlimiet (in sekondes)"
-#: ../../network/ethernet.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
msgstr ""
-"Geen ethernetkaart is op die stelsel gevind nie.\n"
-"Ek kan nie hierdie konneksietipe opstel nie."
-#: ../../network/ethernet.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
-msgstr ""
-"Watter DCHP-kliënt wil u gebruik?\n"
-"Verstek is dhcp-client"
+msgid "Croatian"
+msgstr "Kroaties"
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Use existing partition"
+msgstr "Gebruik bestaande partisies"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Unable to contact mirror %s"
+msgstr "Kon nie vurk nie: %s"
+
+#: ../../standalone/logdrake:1
#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Geen ISDN PCI-kaart gevind nie. Kies asb. een op die volgende skerm."
+msgid "/Help/_About..."
+msgstr "/Help/_Aangaande..."
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Remove user directories before restore."
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
msgstr ""
-"Ek het 'n ISDB PCI-kaart gevind, maar ek ken nie die tipe nie. Kies asb.'n "
-"PCI-kaart op die volgende skerm."
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Wat is u ISDN-kaart?"
+msgid "CUPS printer configuration"
+msgstr "Verander drukkerkonfigurasie"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "ISDN Configuration"
-msgstr "ISDN Konfigurasie"
+msgid "could not find any font in your mounted partitions"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Abort"
-msgstr "Aborteer"
+msgid "F00f bug"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Continue"
-msgstr "Gaan voort"
+msgid "XFree %s"
+msgstr "XFree %s"
-#: ../../network/isdn.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
msgstr ""
-"\n"
-"Indien u 'n ISA-kaart het, behoort die waardes op die volgende skerm reg te "
-"wees.\n"
-"\n"
-"Indien u 'n PCMCIA kaart het, moet u die IRQ en I/O van u kaart weet.\n"
+"Watter DCHP-kliënt wil u gebruik?\n"
+"Verstek is dhcp-client"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "I don't know"
-msgstr "Ek weet nie"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Domain Name:"
+msgstr "Domeinnaam"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "PCI"
-msgstr "PCI"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "On Floppy"
+msgstr "Stoor op floppie"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore"
+msgstr "Herstel vanaf lêer"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "What kind of card do you have?"
-msgstr "Oor watter tipe kaart beskik u?"
+msgid "Looking for available packages..."
+msgstr "Soek vir beskikbare pakkette"
-#: ../../network/isdn.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr ""
+msgid "Init Message"
+msgstr "Beginboodskap"
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Watter protokol verlang u?"
+msgid "Rescue partition table"
+msgstr "Reddingspartisietabel"
-#
-#: ../../network/isdn.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connection complete."
+msgstr "Konneksiespoed"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Protokol vir die res van die wêreld"
+msgid "Cyprus"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
+msgid "Remove from RAID"
+msgstr "Verwyder uit RAID"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr ""
-"Protokol vir die res vd wêreld \n"
-" geen D-Kanaal nie (bruikhuurlyne)"
+"Hierdie wagwoord is te eenvoudig. Dit moet ten minste %d karakters bevat."
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "European protocol"
-msgstr "Europese protokol"
+msgid "Configuration Wizards"
+msgstr "Netwerkkonfigurasie-assistent"
-#: ../../network/isdn.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Europese protokol (EDSS1)"
+msgid "ISDN connection"
+msgstr "ISDN konneksie"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
+msgid "primary"
msgstr ""
-"Kies u internetdiensvoorsiener.\n"
-"Indien nie in die lys nie kies Ongelys"
-#: ../../network/isdn.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "External ISDN modem"
-msgstr "Eksterne ISDN-kaart"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr ""
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Internal ISDN card"
-msgstr "Interne ISDN-kaart"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
+"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
+"\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
+msgstr ""
+"U kan nou dienste kies wat by herlaaityd moet afskop.\n"
+"Wanneer u die muis oor 'n item beweeg, sal 'n klein ballon opspring\n"
+"wat die rol van die diens verduidelik.\n"
+"\n"
+"Wees versigtig met hierdie stap. Indien u beplan om dié rekenaar as 'n\n"
+"bediener te gebruik wil u nie dienste afskop wat u nie gaan gebruik nie."
-#: ../../network/isdn.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "Watter tipe is u ISDN-konneksie?"
+msgid "Skip"
+msgstr "Mis hierdie stap"
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Niue"
+msgstr "Geen video"
+
+#: ../../services.pm:1
#, c-format
-msgid "Network Configuration Wizard"
-msgstr "Netwerkkonfigurasie-assistent"
+msgid ""
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
+msgstr ""
+"Aktiveer/Deaktiveer all netwerkkoppelvlakke wat opgestel is om by\n"
+"herlaaityf te begin."
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "Ou konfigurasie (isdn4net)"
+msgid ""
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "New configuration (isdn-light)"
-msgstr "Nuwe konfigurasie (Ligte ISDN/isdn-light)"
+msgid "important"
+msgstr "belangrik"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
+msgid "Total Progress"
+msgstr ""
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Which ISDN configuration do you prefer?\n"
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-" tools, but is tricky to configure, and not standard.\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
"\n"
-"We recommand the light configuration.\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
msgstr ""
+"DrakX sal probeer om vir PCI SCSI-kaarte te soek.\n"
+"Indien DrakX 'n SCSI-kaart bespeur en weet watter drywer omte gebruik sal "
+"dit outomaties installeer word.\n"
+"\n"
+"Indien u nie oor 'n SCSI-kaart, beskik nie of oor 'n ISA SCSI-kaart of 'n "
+"PCI SCSI-kaart beskik wat DrakX nie kan herken nie, sal u gevra word of daar "
+"enige SCSI-kaarte in diestelsel is. Indien daar geen is nie kliek op 'Nee', "
+"andersins op 'Ja'. U sal dan uit'n drywerlys kan kies.\n"
+"\n"
+"\n"
+"Indien u self 'n drywer moes spesifiseer, sal DrakX u ook vra vir enige "
+"spesifiekeopsies.\n"
+"U kan egter DrakX toelaat om self die hardeware te ondervra. DIt werk "
+"gewoonlik die beste.\n"
+"\n"
+"Lees die installasie inligting hoe om hierdie tipe inligting m.b.v. die "
+"Windows-bedryfstelsel te bekom.\n"
+"U kan dit ook vanaf die internet onttrek indien u sulke toegang het."
-#: ../../network/modem.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Do nothing"
-msgstr "CUPS word gelaai"
+msgid "Users"
+msgstr "Gebruikerskode"
-#: ../../network/modem.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Install rpm"
-msgstr "Installasie"
+msgid "Aruba"
+msgstr "Grub"
-#: ../../network/modem.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
-msgstr ""
-
-#: ../../network/modem.pm:1
-#, fuzzy, c-format
-msgid "Title"
-msgstr "Tabel"
+msgid "Preparing bootloader..."
+msgstr "Herlaaistelsel word voorberei"
-#: ../../network/modem.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
+msgid "Gateway (e.g. %s)"
msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Tweede DNS-bediener (opsioneel)"
+msgid "The passwords do not match"
+msgstr "Die wagwoorde stem nie ooreen nie."
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Eerste DNS-bediener (opsioneel)"
+msgid "Examples for correct IPs:\n"
+msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Domain name"
-msgstr "Domeinnaam"
+msgid "Frequency (MHz)"
+msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../install_any.pm:1
#, c-format
-msgid "CHAP"
-msgstr "CHAP"
+msgid ""
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
+msgstr ""
+"Om hierdie gestoorde pakketkeuse te gebruik, herlaai die installasie met "
+"\"linux defcfg=floppy\""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Script-based"
-msgstr "Skriptipe"
+msgid "the number of the processor"
+msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Terminal-based"
-msgstr "Terminaaltipe"
+msgid "Hardware clock set to GMT"
+msgstr "Hardewareklok gestel vir GMT"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "PAP"
-msgstr "PAP"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Give a file name"
+msgstr "Regte naam"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Please choose the port that your printer is connected to."
+msgstr "Op watter seriaalpoort is u modem gekoppel?"
+
+#: ../../standalone/livedrake:1
#, c-format
-msgid "Login ID"
-msgstr "Aantekenkode"
+msgid "Change Cd-Rom"
+msgstr "Verander CDROM"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Phone number"
-msgstr "Telefoonnommer"
+msgid "Paraguay"
+msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Connection name"
-msgstr "Konneksienaam"
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
+msgstr ""
-#: ../../network/modem.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Dialup options"
-msgstr "Opbelopsies"
+msgid "There's no known driver for your sound card (%s)"
+msgstr ""
-#: ../../network/modem.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Op watter seriaalpoort is u modem gekoppel?"
+msgid "force"
+msgstr "forseer"
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Network Configuration"
-msgstr "Netwerkkonfigurasie"
+msgid "Exit"
+msgstr "Verlaat"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
msgstr ""
-"Nadat dit klaar is, sal dit beter wes om u X-omgewing te herlaai\n"
-"om die rekenaarnaamveranderingprobleem te voorkom."
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Geluk, die netwerk en internetkonfigurasie is voltooi.\n"
-"\n"
-"Die kongiurasie gaan op u stelsel toegepas word.\n"
+msgid "Estonian"
+msgstr "Estoniaans"
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""
-"Daar was 'n probleem met die herlaai van die netwerk.\n"
-"\n"
-"%s"
+"Apache is 'n WWW-bediener.\n"
+"Dit kan HTML-lêers uitstuur en CGI's hanteer"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr ""
-"Hierdie pakket moet opgradeer word\n"
-"Is u seker u wil dit deselekteer?"
+msgid "Add/Del Clients"
+msgstr "DHCP-Kliënt"
-#: ../../network/netconnect.pm:1
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Network configuration"
-msgstr "Netwerkkonfigurasie"
+msgid "Choose the network interface"
+msgstr "Kies die netwerkkoppelvlak"
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Wil u die konneksie met herlaaityd aanskakel?"
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Unknown Model"
+msgstr "Onbekende model"
-#: ../../network/netconnect.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Internet connection"
-msgstr "Internetkonneksie"
+msgid "CD/DVD burners"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
msgstr ""
-"U het meer as een internetkonneksiemetode opgste.\n"
-"Kies die een wat u verlang.\n"
-"\n"
+"Verstekpartisie vir herlaai\n"
+" (vir MS_DOS doeleindes, nie LILO s'n nie)\n"
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Kies die konneksie wat u wil konfigureer"
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "choose image"
+msgstr "Kies 'n lêer"
-#: ../../network/netconnect.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "ethernet card(s) detected"
-msgstr "ethernet kaart(e) bespeur"
+msgid "Firewalling configuration detected!"
+msgstr "Vuurmuurkonfigurasie gevind!"
-#: ../../network/netconnect.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "LAN connection"
-msgstr "LAN konneksie"
+msgid "Connection name"
+msgstr "Konneksienaam"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "cable connection detected"
-msgstr "Kabelkonneksie bespeur"
+msgid ""
+"x coordinate of text box\n"
+"in number of characters"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Cable connection"
-msgstr "Kabelkonneksie"
+msgid "Updating package selection"
+msgstr "Pakketseleksie word opgedateer"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "detected"
-msgstr "%s bespeur"
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "Waar wil u terugluslêer %s heg?"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "ADSL connection"
-msgstr "ADSL konneksie"
+msgid ""
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
+msgstr ""
+"Die floppie is sukselvol geskep.\n"
+"U kan nou weer 'n installasie uitspeel."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the number of buttons the mouse has"
+msgstr "2 knoppies"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "detected %s"
-msgstr "%s bespeur"
+msgid ""
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "ISDN connection"
-msgstr "ISDN konneksie"
+msgid "Replay"
+msgstr "Herspeel"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Winmodem connection"
-msgstr "Normale modemkonneksie"
+msgid "Backup other files"
+msgstr "Korrupte rugsteunlêer"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "detected on port %s"
-msgstr "Op poort %s bespeur"
+msgid "No floppy drive available"
+msgstr "Geen sagteskyaandrywer beskikbaar nie"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Normal modem connection"
-msgstr "Normale modemkonneksie"
+msgid "Backup files are corrupted"
+msgstr ""
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Detecting devices..."
-msgstr "Toestel word afgetas..."
+msgid "TV norm:"
+msgstr ""
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Expert Mode"
-msgstr "Kundige bedryfsvlak"
+msgid "Cpuid family"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Use auto detection"
-msgstr "Gebruik outobespeuring"
+msgid "32 MB"
+msgstr "32 MB"
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Choose the profile to configure"
-msgstr "Kies die profiel om te konfigureer"
+msgid "Lithuanian AZERTY (new)"
+msgstr "Lituanies AZERTY (nuut)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
msgstr ""
-"Welkom by die Netwerkkonfigurasie-assistent\n"
-"\n"
-"Ons gaan nou u internet/netwerkkonneksie konfigureer.\n"
-"Iniden u nie outobespeuring verlang nie, deselekteer die opsie.\n"
-#: ../../network/netconnect.pm:1
-#, c-format
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
msgstr ""
-"Omdat u netwerk installasie doen, is u netwerk aslreeds opgestel.\n"
-"Kliek op OK om hierdee konfigurasie te behou, of op Kanselleer om u Internet "
-"& Netwerkkonneksie te herkonfigureer.\n"
+"U het 'n sagteware RAID-partisie as wortel (/).\n"
+"Geen herlaaistelsel sal dit kan hanteer sonder 'n /boot partisie nie.\n"
+"Onthou om 'n /boot by te voeg."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Previous"
+msgstr "<- Vorige"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Other OS (MacOS...)"
+msgstr "Ander bedryfstelsel (MacOS...)"
+
+#
+#: ../../mouse.pm:1
+#, c-format
+msgid "To activate the mouse,"
+msgstr "Om die muis te aktiveer"
+
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Bringing up the network"
+msgstr "Netwerk op pad op"
+
+#: ../../common.pm:1
+#, fuzzy, c-format
+msgid "Screenshots will be available after install in %s"
+msgstr "U kan ander tale selekteer wat na installasie beskikbaar sal wees."
+
+#: ../../help.pm:1
#, c-format
msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
"\n"
-"We are now going to configure the %s connection.\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
"\n"
-"Press OK to continue."
-msgstr ""
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
-"Ons gan nou die %s konneksie konfigureer.\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
"\n"
-"Drk OK om voort te gaan."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Ons gaan nou die %s konneksie herkonfigureer."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Internet connection & configuration"
-msgstr "Internetkonneksie en konfigurasie"
-
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Configure the connection"
-msgstr "Stel netwerk op"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Disconnect"
-msgstr "Diskonnekteer"
+msgid "Tanzania"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Connect"
-msgstr "Konnekteer"
+msgid "Computing FAT filesystem bounds"
+msgstr "FAT lêerstelselgrense word bereken"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
-"You can reconfigure your connection."
+"Backup Sources: \n"
msgstr ""
-"\n"
-"U kan u konneksie herkonfigureer."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
+msgid "Content of the file"
msgstr ""
-"\n"
-"U kan aan die internet konnekter of u konneksie herkonfigureer."
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "U is nie tans aan die internet gekonnekteer nie."
+msgid "Authentication LDAP"
+msgstr "LDAP-magtiging"
-#: ../../network/netconnect.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
+msgid "Let me pick any driver"
msgstr ""
-"\n"
-"U kan diskonnekteer or herkonfigureer."
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "You are currently connected to the Internet."
-msgstr "U is tans aan die internet gekonnekteer."
-
-#: ../../network/network.pm:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "Instaanbediener moet begin met http://"
+msgid "Profile "
+msgstr "Profiel:"
-#: ../../network/network.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Proxy should be http://..."
-msgstr "Instaanbediener moet begin met http://"
+msgid "transmitted"
+msgstr ""
-#: ../../network/network.pm:1
-#, c-format
-msgid "FTP proxy"
-msgstr "FTP instaanbediener"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Palestine"
+msgstr "Stoor pakketseleksie"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "HTTP proxy"
-msgstr "HTTP instaanbediener"
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
-#: ../../network/network.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Proxies configuration"
-msgstr "Instaanbedienerkonfigurasie"
+msgid "%d comma separated strings"
+msgstr ""
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "IP-adres moet in 1.2.3.4. formaat wees"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Here is the full list of keyboards available"
+msgstr "Hierdie is die volledige lys van beskikbare sleutelborde"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "IP-adres moet in 1.2.3.4. formaat wees"
+msgid "Theme name"
+msgstr "Drukkernaam:"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Gateway device"
-msgstr "Netwerkportaaltoestel"
+msgid "/_Help"
+msgstr "/_Help"
-#: ../../network/network.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Gateway (e.g. %s)"
+msgid ""
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
msgstr ""
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "DNS server"
-msgstr "DNS bediener"
+msgid "the width of the progress bar"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
+msgid "Cook Islands"
msgstr ""
-"Tik asb die rekenaarnaam in.\n"
-"Dit moet 'n volle gekwalifiseerde naam wees,\n"
-"bv. ``myne.mywerk.co.za''.\n"
-"U mag ook die netwerkhek byvoeg indien daar een is"
-#: ../../network/network.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
+msgid "Formatting partition %s"
+msgstr "Partisie %s word formateer"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Hostname required"
+msgstr "Bedienernaam:"
+
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
+msgid "Unselect fonts installed"
msgstr ""
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP-adres moet in 1.2.3.4. formaat wees"
+msgid "Cancel"
+msgstr "Kanselleer"
-#: ../../network/network.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Start at boot"
-msgstr "Gelaai tydens herlaaityd"
+msgid "Searching for configured scanners ..."
+msgstr "Plaaslike drukker"
#
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Toets asb. die muis"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Wheel"
+msgstr "Wiel"
-#: ../../network/network.pm:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "Network Hotplugging"
-msgstr "Netwerkkonfigurasie"
+msgid "Videocard"
+msgstr "Videomodus"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "Volg netwerkkart ID. (nuttig vir skootrekenaars)"
+msgid "\tBackups use tar and bzip2\n"
+msgstr ""
-#
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "DHCP host name"
-msgstr "Rekenaarnaam"
+msgid "Remove Selected"
+msgstr "Verwyder tou"
-#
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Netmask"
-msgstr "Netmasker"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _modems"
+msgstr "Gebruik outobespeuring"
#
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "IP address"
-msgstr "IP adres"
+msgid "Remove printer"
+msgstr "Verwyder drukker"
-#: ../../network/network.pm:1
+#: ../../install_interactive.pm:1
#, fuzzy, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Automatic IP"
-msgstr "Outomatiese IP"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid " (driver %s)"
-msgstr "(drywer %s)"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfigureer netwerktoestel %s"
-
-#: ../../network/network.pm:1
-#, c-format
msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
msgstr ""
-"Gee asb die IP-konfigurasie vir hierdie rekenaar.\n"
-"Elke item moet as 'n IP-adres in dotdesimalenotasie\n"
-"(1.2.3.4) gegee word."
+"WAARSKUWING\n"
+"\n"
+"DrakX moet nou u WIndowspartisie se grootte verander. Hierdie operasie\n"
+"IS GEVAARLIK. Indien u nie alreeds so gemaak het nie, moet u hierdie "
+"installasie\n"
+"verlaat, scandisk onder Windows loop en dalk ook defrag. Dan kan u terugkeer "
+"na\n"
+"hierdie installasie. Rugstuen ook u data. Insien u skeer is van u saak, kies "
+"OK."
-#: ../../network/network.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
+msgid "Which services would you like to allow the Internet to connect to?"
msgstr ""
-"WAARSKUWING: Die toestel is alreeds opgestel om aan die internette "
-"konnekteer.\n"
-"U kan die toestel net so aanvaar.\n"
-"Veranderinge aan onderstaande velde sal hierdie konfigurasie oorskryf."
-#: ../../network/shorewall.pm:1
-#, c-format
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
msgstr ""
-"Waarskuwing! 'n Bestaande vuurmuurkonfigurasie is bespeur. U sal dalk na "
-"dietyd self regstellings moet aanbring."
+"Welkom by die proksiekonfigurasienutsprogram.\n"
+"\n"
+"Hier kan u die HTTP en FTP-instaanbedieners\n"
+"opstel met of sonder aantekenkodes en wagwoorde\n"
-#: ../../network/shorewall.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Vuurmuurkonfigurasie gevind!"
+msgid "Other"
+msgstr "Ander"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
-msgid "Account Password"
-msgstr "Wagwoord"
+msgid "Default"
+msgstr "Verstek"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Account Login (user name)"
-msgstr "Gebruikerskode"
+msgid "Button 2 Emulation"
+msgstr "Knop-2 Emulasie"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Konneksie tydlimiet (in sekondes)"
+msgid "type1inst building"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Connection speed"
-msgstr "Konneksiespoed"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Abiword"
+msgstr "Aborteer"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "choose image file"
+msgstr "Kies 'n lêer"
+
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Dialing mode"
-msgstr "Belmetode"
+msgid "X server"
+msgstr "X-bediener"
-#: ../../network/tools.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Domain Admin User Name"
+msgstr "Domeinnaam"
+
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "There was an error while scanning for TV channels"
+msgstr "Daar was 'n fout met die installasie van die pakkette:"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "Choose your country"
-msgstr "Kies u land"
+msgid "US keyboard (international)"
+msgstr "VSA internasionale sleutelbord"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Not installed"
+msgstr "Verlaay installasie"
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "Voorsiener DNS 2 (opsioneel)"
+msgid "LAN connection"
+msgstr "LAN konneksie"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "Voorsiener DNS 1 (opsioneel)"
+msgid "/File/-"
+msgstr "/Lêer/-"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Provider phone number"
-msgstr "Voorsiener se telefoonnommer"
+msgid "Italian"
+msgstr "Italiaans"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Voorsienernaam (bv voorsiener.co.za)"
+msgid "Basic"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Your personal phone number"
-msgstr "U persoonlike telefoonnommer"
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Card IO_1"
-msgstr "Kaart IO_1"
+msgid "Honduras"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "Card IO_0"
-msgstr "Kaart IO_0"
+msgid "pdq"
+msgstr ""
#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Card IO"
msgstr "Kaart I/O"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Card mem (DMA)"
-msgstr "Kaartgeheue (DMA)"
+msgid "when checked, owner and group won't be changed"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Card IRQ"
-msgstr "Kaart IRQ"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
+msgstr ""
+"\n"
+"Hierdie spesiale herlaaipartisie\n"
+"is om u stelsel te duolaai.\n"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Please fill or check the field below"
-msgstr "Vul asb. die velde hieronder in"
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
+msgstr ""
-#
-#: ../../network/tools.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Connection Configuration"
-msgstr "Konneksiekonfigurasie"
-
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
msgstr ""
-"Die tselsel blyk nie aan die internet gekonnekteer te wees nie.\n"
-"Probeer om u stelsel te herkonfigureer."
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t-Network by FTP.\n"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Russian (Yawerty)"
+msgstr "Russue (Yawerty)"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Vir sekuriteitsredes, word u nou gediskonnekteer."
+msgid "You must enter a device or file name!"
+msgstr "Tik drukkertoestel URI in"
-#: ../../network/tools.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Die stelsel is nou aan die internet gekonnekteer."
+msgid "/_Quit"
+msgstr "Verlaat"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Testing your connection..."
-msgstr "Konneksie word getoets..."
+msgid ""
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
+msgstr ""
-#: ../../network/tools.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Wil u nou aan die internet konnekteer?"
+msgid "Graphics memory: %s kB\n"
+msgstr "Video geheue: %s kB\n"
-#: ../../network/tools.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Internet configuration"
-msgstr "Internetkonfigurasie"
-
-#: ../../partition_table/raw.pm:1
-#, fuzzy, c-format
msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
msgstr ""
-"Iets vrots gebeur op u hardeskyf.\n"
-"'n Dataintegriteitstoets het misluk.\n"
-"Dit beteken dat enigiets wat na u hardeskyf geskryf word as gemors sal "
-"eindig."
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid " (Default)"
-msgstr " (Verstek)"
-
-#: ../../printer/cups.pm:1
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "CUPS-bediener IP:"
+msgid "access to compilation tools"
+msgstr ""
-#
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Remote Printers"
-msgstr "Eksterne drukker"
+msgid "Please select data to restore..."
+msgstr "Kies asb. 'n taal om te gebruik."
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "CUPS"
-msgstr "CUPS"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
+msgstr ""
+"Indien u beplan om 'aboot' te gebruik, los spasie aan die begin\n"
+"van die skyf. (2048 sektors is genoeg)."
-#: ../../printer/cups.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "(on this machine)"
-msgstr "(op hierdie rekenaar)"
+msgid "Standard test page"
+msgstr "Standaard toetsbladsy"
-#: ../../printer/cups.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "(on %s)"
-msgstr "(op %s)"
+msgid "Create"
+msgstr "Skep"
-#: ../../printer/data.pm:1
-#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Generiese Unixdrukstelsel (Common Unix Printing System) "
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "What"
+msgstr "Wag"
-#: ../../printer/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "LPRng"
-msgstr "LPRng"
+msgid "There was an error ordering packages:"
+msgstr "Daar was 'n fout met pakkette:"
-#: ../../printer/data.pm:1
-#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - Nuwe generasie LPR"
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Bulgarian (BDS)"
+msgstr "Bulgaars"
-#: ../../printer/data.pm:1
-#, c-format
-msgid "LPD"
-msgstr "LPD"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Disable Server"
+msgstr "Datbasis"
-#: ../../printer/data.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Filesystem encryption key"
+msgstr "LOerstelseltipe: "
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Lyndrukkerdiensprogram"
+msgid "Gujarati"
+msgstr ""
-#: ../../printer/data.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "PDQ"
-msgstr "PDQ"
+msgid ""
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
+msgstr ""
-#: ../../printer/data.pm:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "Save theme"
+msgstr "Installeer stelsel"
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "group"
+msgstr "Werkgroep:"
+
+#: ../../lang.pm:1
#, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Druk sonder drukkertou"
+msgid "Brazil"
+msgstr ""
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Unknown Model"
-msgstr "Onbekende model"
+msgid "Auto Install"
+msgstr "Installasie"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "Unknown model"
-msgstr "Onbekende model"
+msgid "Network Configuration Wizard"
+msgstr "Netwerkkonfigurasie-assistent"
-#: ../../printer/main.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "%s (Port %s)"
-msgstr "Poort"
+msgid "Removable media automounting"
+msgstr "Verwyderbare media"
-#
-#: ../../printer/main.pm:1
+#: ../../services.pm:1
#, fuzzy, c-format
-msgid "Host %s"
-msgstr "Rekenaarnaam"
+msgid "Printing"
+msgstr "Druk"
-#: ../../printer/main.pm:1
+#: ../../harddrake/sound.pm:1
#, fuzzy, c-format
-msgid "Network %s"
-msgstr "Netwerkkoppelvlak"
+msgid "Unkown driver"
+msgstr "Onbekende model"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"There are no printers found which are directly connected to your machine"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Create a new partition"
+msgstr "Kies 'n nuwe grootte"
+
+#: ../../harddrake/sound.pm:1
#, fuzzy, c-format
-msgid "Interface \"%s\""
-msgstr "Koppelvlak %s"
+msgid "Driver:"
+msgstr "Drywer"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Local network(s)"
-msgstr "geen netwerkkaart gevind nie"
+msgid "unknown"
+msgstr "Onbekende model"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Raw printer (No driver)"
-msgstr ""
+msgid "Use fdisk"
+msgstr "Gebruik fdisk"
-#: ../../printer/main.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ", using command %s"
-msgstr ""
+msgid "MOVE YOUR WHEEL!"
+msgstr "BEWEEG DIE WIEL!"
-#: ../../printer/main.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
+msgid "sent: "
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr ""
+msgid "Automatic IP"
+msgstr "Outomatiese IP"
-#: ../../printer/main.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+" Note that two different options are available after clicking the button:\n"
+"\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr ""
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
-#: ../../printer/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Fout in die skryf van %s"
+msgid "Configuration of a remote printer"
+msgstr "Konfigureer drukker"
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ", multi-function device"
+msgid "Moldova"
msgstr ""
-#: ../../printer/main.pm:1
-#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to erase your tape before the backup."
+msgstr "Kies die pakkette wat u wil installeer"
-#: ../../printer/main.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid ", multi-function device on USB"
+msgid "An online platform to respond to enterprise support needs."
msgstr ""
-#: ../../printer/main.pm:1
-#, c-format
-msgid ", multi-function device on parallel port \\#%s"
-msgstr ""
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "Instaanbediener moet begin met http://"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid ", USB printer"
-msgstr "Geen drukker"
+msgid "Add a new rule at the end"
+msgstr "Voeg drukker by"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ", USB printer \\#%s"
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
msgstr ""
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid " on parallel port \\#%s"
+msgid ""
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
msgstr ""
+"U kan noue die opsies voorsien vir module %s.\n"
+"Opsies is in die formaat ``naam=waarde naam2=waarde2 ...''.\n"
+"Bv. ``io=0x300 irq-7''"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Local Printers"
-msgstr "Plaaslike drukker"
-
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Pipe job into a command"
-msgstr "Pyk drukstuk na program"
+msgid "Quit without writing the partition table?"
+msgstr "Wil u verlaat, sonder om die partisietabel op te dateer?"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Enter a printer device URI"
-msgstr "Tik drukkertoestel URI in"
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
-#: ../../printer/main.pm:1
-#, c-format
-msgid "Printer on NetWare server"
-msgstr "Eksterne Netware-drukker"
+#: ../../standalone.pm:1
+#, fuzzy, c-format
+msgid "Installing packages..."
+msgstr "Installeer pakket %s"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Eksterne SMB/Windows 95/98/NT-drukker"
+msgid "Dutch"
+msgstr "Nederlands"
#
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Netwerkdrukker (sok)"
+msgid "The following packages need to be installed:\n"
+msgstr "Die volgende pakkette gaan installeer word"
-#
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer on remote lpd server"
-msgstr "Eksterne LPD-drukker"
+msgid "Angola"
+msgstr ""
-#
-#: ../../printer/main.pm:1
-#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Eksterne CUPS-drukker"
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "service setting"
+msgstr "interessant"
#
-#: ../../printer/main.pm:1
-#, c-format
-msgid "Remote printer"
-msgstr "Eksterne drukker"
-
-#: ../../printer/main.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Local printer"
-msgstr "Plaaslike drukker"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuring applications..."
-msgstr "Konfigureer drukker"
+msgid "Custom"
+msgstr "Aangepaste"
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Printerdrake"
-msgstr "Drukker"
+msgid "File is already used by another loopback, choose another one"
+msgstr "Lêer word alreeds deur 'n ander teruglus gebruik,kies 'n ander een"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Drukkerdata word gelees..."
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Read-only"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Wil u die werklik die drukker verwyder?"
+msgid "Latvia"
+msgstr "Latvies"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Remove printer"
-msgstr "Verwyder drukker"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Learn how to use this printer"
-msgstr "Wil u die konfigurasie toets?"
+msgid "No known driver"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Print test pages"
-msgstr "Druk toetsbladsy(e)"
+msgid "1 MB"
+msgstr "1 MB"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksound:1
#, c-format
msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "Configure Local Area Network..."
+msgstr "Stel plaaslike netwerk op..."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "Launch the sound system on your machine"
+msgstr "Laai die klankstelsel op u rekenaar"
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr ""
+#, fuzzy, c-format
+msgid "Preparing printer database..."
+msgstr "Drukkerdata word gelees..."
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Information"
+msgstr "Vertoon inligting"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr ""
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "No network card"
+msgstr "geen netwerkkaart gevind nie"
-#: ../../printer/printerdrake.pm:1
+#
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "Which filesystem do you want?"
+msgstr "Watter lêerstelsel verlang u?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Drukker \"%s\" is nou die verstekdrukker"
+msgid "3 buttons"
+msgstr "3 knoppies"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Default printer"
-msgstr "Verstek drukker"
+msgid "Detailed information"
+msgstr "Gedetaileerde inligting"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Set this printer as the default"
-msgstr "Maak hierdie die verstekdrukker"
+msgid "Malta"
+msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer options"
-msgstr "Drukkeropsies"
+msgid ""
+"Printer default settings\n"
+"\n"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Printer manufacturer, model"
-msgstr "Drukkervervaardiger, model"
+msgid "This floppy is not FAT formatted"
+msgstr "Hierdie floppie is nie in FAT-formaat nie"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "Drukkervervaardiger, model, drywer"
+msgid "Configuring network"
+msgstr "Stel netwerk op"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
#, fuzzy, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Drukkerdata word gelees..."
+msgid "Graphic Card"
+msgstr "Videokaart"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Printer name, description, location"
-msgstr "Drukkernaam,. beskrywing, ligging"
+msgid "Resizing Windows partition"
+msgstr "Windowslêerstelselgrense word bereken"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Printer connection type"
-msgstr "Drukkerkonneksietipe"
+msgid "Provider dns 1 (optional)"
+msgstr "Voorsiener DNS 1 (opsioneel)"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Raw printer"
-msgstr "Geen drukker"
+#: ../../lang.pm:1
+#, c-format
+msgid "Cameroon"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Do it!"
-msgstr "Gaan voort!"
+msgid ""
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
+msgstr ""
+"U het nou partisie %s partisioneer.\n"
+"Wanneer u klaar is, stoor u veranderinge met 'w'."
#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
@@ -9609,419 +9631,342 @@ msgstr "Gaan voort!"
msgid "Close"
msgstr "Sluit af"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../help.pm:1
+#, c-format
msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
msgstr ""
-"Drukker %s: %s %s\n"
-"Wil u hierdie drukker verander?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Modify printer configuration"
-msgstr "Verander drukkerkonfigurasie"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Add a new printer"
-msgstr "Voeg drukker by"
+msgid "Calendar"
+msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Normal Mode"
-msgstr "Normale modus"
+msgid ""
+"Restore Selected\n"
+"Catalog Entry"
+msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Change the printing system"
-msgstr "Stel netwerk op"
+msgid ""
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
+msgstr ""
+"Om 'n eksterne lpd drukkertou te gebruik,moett die naam\n"
+"van die drukkkerbediener en die naam van die drukkertou\n"
+"voorsien word."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "CUPS configuration"
-msgstr "Konfigurasie"
+msgid "Iceland"
+msgstr "Yslandies"
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgid "consolehelper missing"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr ""
+msgid "stopped"
+msgstr "onaktief"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Whether the FPU has an irq vector"
msgstr ""
-"Hier is die bestaande drukkertoue.\n"
-"U kan byvoeg or verwyder soos nodig."
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Printing system: "
-msgstr "Drukkerstelsel:"
+msgid "Ext2"
+msgstr "Ext2"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Checking installed software..."
-msgstr "Installeerde sagteware word deursoek..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing Foomatic..."
-msgstr "Installeer pakket %s"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "Konfigureer drukker"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Konfigureer drukker"
+msgid "Expand Tree"
+msgstr "Maak boom oop"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Reading printer data..."
-msgstr "Drukkerdata word gelees..."
+msgid ""
+"The old \"%s\" driver is blacklisted.\n"
+"\n"
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
+msgstr ""
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Watter drukkerstelsel (spoelprogram) verlang u?"
+msgid "Expert Mode"
+msgstr "Kundige bedryfsvlak"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select Printer Spooler"
-msgstr "Kies drukkerspoelprogram"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Setting Default Printer..."
-msgstr "Verstek drukker"
+msgid "Printer options"
+msgstr "Drukkeropsies"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Installing %s ..."
-msgstr "Installeer pakket %s"
+msgid "Local Network adress"
+msgstr "geen netwerkkaart gevind nie"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Removing %s ..."
-msgstr "LPD word verwyder..."
+msgid "Backup your System files. (/etc directory)"
+msgstr "Korrupte rugsteunlêer"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
+"Do you want to install the updates ?"
msgstr ""
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Watter drukkerstelsel verlang u?"
+msgid "Samba Server"
+msgstr "NIS-bediener"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Do you really want to configure printing on this machine?"
+"Enable/Disable IP spoofing protection."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Installing a printing system in the %s security level"
+msgid "Australian Optus cable TV"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "paranoid"
-msgstr "Paranoïes"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "high"
-msgstr "Hoog"
-
-#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Restarting printing system..."
-msgstr "Watter drukkerstelsel verlang u?"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuration of a remote printer"
-msgstr "Konfigureer drukker"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
msgstr ""
+" <Tab>/<Alt-Tab> tussen elemente | <Space> selekteer | <F12> volgende skerm "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
+msgid "Subnet:"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Configure the network now"
-msgstr "Stel netwerk op"
+msgid "Zimbabwe"
+msgstr "moontlik"
-#: ../../printer/printerdrake.pm:1
+#
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Go on without configuring the network"
-msgstr "Stel netwerk op"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
+msgid "Please enter the host name or IP."
+msgstr "Toets asb. die muis"
-#: ../../printer/printerdrake.pm:1
+#
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Network functionality not configured"
-msgstr "Monitor is nie opgestel nie"
+msgid "When"
+msgstr "Wiel"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Starting network..."
-msgstr "Konneksie word begin..."
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Second DNS Server (optional)"
+msgstr "Tweede DNS-bediener (opsioneel)"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Refreshing printer data..."
-msgstr "Drukkerdata word gelees..."
+#: ../../lang.pm:1
+#, c-format
+msgid "Finland"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
+"Arguments: (arg)\n"
+"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Transfer printer configuration"
-msgstr "Dra drukkerkonfigurasie oor"
+msgid "Color depth: %s\n"
+msgstr "Kleurdiepte: %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Transferring %s..."
-msgstr "%s word oorgedra..."
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "U kan nie hierdie pakket deselekteer nie. Dit moet opgradeer word."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "New printer name"
-msgstr "Nuwe drukkernaam"
+msgid "Loading from floppy"
+msgstr "Oplaai vanaf floppie"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Transfer"
-msgstr "Oordrag"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Slovenia"
+msgstr "Sloveens"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
+"Enter a user\n"
+"%s"
msgstr ""
+"Tik 'n gebruiker in\n"
+"%s"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Do not transfer printers"
-msgstr "Moet nie drukkers oordra nie"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "ProgressBar color selection"
+msgstr "Drukkermodelkeuse"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
msgstr ""
+"Hier is die huidige inskrywings\n"
+"U kan byvoeg or verwyder soos nodig."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD en LPRng ondersteun nie IPP-drukkers nie.\n"
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
msgstr ""
+"Loop instruksies deur 'at' geskeduleer op die tyd deur 'at' gespesifiseer. "
+"Loop ook instruksiebondels wanneer die stelsellas laag genoeg is."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
+msgid "Radio support:"
msgstr ""
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
+#, fuzzy, c-format
+msgid "Installing SANE packages..."
+msgstr "Installeer pakket %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
+msgid "boot disk creation"
+msgstr "herlaaiskyfskepping"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printing test page(s)..."
-msgstr "Toetsbladsy(e) word gedruk..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Print option list"
-msgstr "Drukkeropsies"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Netwerk op pad af"
+msgid "LDAP"
+msgstr "KDAP"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Netwerk op pad af"
+#: ../../bootloader.pm:1
+#, c-format
+msgid "SILO"
+msgstr "SILO"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Netwerk op pad af"
+#: ../../diskdrake/removable.pm:1
+#, c-format
+msgid "Change type"
+msgstr "Verander tipe"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Netwerk op pad af"
+#: ../../any.pm:1
+#, c-format
+msgid "SILO Installation"
+msgstr "SILO installasie"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
+msgid "Use CD/DVDROM to backup"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_messages.pm:1
#, c-format
msgid ""
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
+"Geluk, installasie is afgehandel.\n"
+"Verwyder die herlaaimedium en druk 'enter' om te herlaai.\n"
+"\n"
+"\n"
+"Vir lapinligting oor hierdie vrystelling vanMandrake Linux,\n"
+"bekyk die errata beskikbaar op\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Inligting oor stelskonfigurasie is beskikbaar in die postinstallasie-\n"
+"hoofstuk in die Offisiële Liux-Mandrake Gebruikersgids."
#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "paranoid"
+msgstr "Paranoïes"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
+msgid "Send mail report after each backup to:"
msgstr ""
#: ../../printer/printerdrake.pm:1
@@ -10032,241 +9977,213 @@ msgid ""
"because the file to print is provided by the application.\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
+msgid "Resolution"
+msgstr "Resolusie"
#: ../../printer/printerdrake.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
msgstr ""
+"Om na 'n SMB drukker te druk moet u die volgende voorsien:\n"
+"SMB rekenaarnaam (dis nie noodwendig dieselfde as die TCP/IP rekenaarnaam\n"
+"nie); moontlik die IP adres van die drukkerbediener; die drukkernaam; \n"
+"toepaslike gebruikerskode en wagwoord; werkgroepnaam."
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
+" Accept/Refuse icmp echo."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "reconfigure"
+msgstr "herkonfigureer"
+
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
+"Hierdie kaart kan ondersteuning vir 3D-hardewareversnelling onder XFree86 %s "
+"bied,\n"
+"MAAR LET DAAROP DAT DIT EKSPERIMENTEEL IS EN DIE REKENAAR MAG VRIES."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Xinetd Service"
+msgstr "Drukkerbediener"
+
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
+msgid "access to network tools"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
+msgid "Firmware-Upload for HP LaserJet 1000"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Did it work properly?"
-msgstr "Het dit reg gewerk?"
+msgid "Here is a list of all auto-detected printers. "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
msgstr ""
-"Toetsbladsy(e) is na die drukker gestuur.\n"
-"Dit mag 'n tydjie neem voordat drukwerk begin.\n"
+"Die 'aboot' installasie het gefaal. Wil u 'n installasie afwurg al\n"
+"word die eerste partisie vernietig?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
+"Options Description:\n"
"\n"
-msgstr ""
-"Toetsbladsy(e) is na die drukkerstelsel gestuur.\n"
-"Dit mag 'n tydjie neem voordat drukwerk begin.\n"
-"Drukstatus:\n"
-"%s\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Do not print any test page"
-msgstr "Druk toetsbladsy(e)"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Photo test page"
-msgstr "Fototoetsbladsy"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Alternative test page (A4)"
-msgstr "Alternatiewe toetsbladsy (A4)"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "Alternatiewe toetsbladsy (Lettergrootte)"
+msgid ""
+"Restore Selected\n"
+"Files"
+msgstr "Verwyder tou"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Standard test page"
-msgstr "Standaard toetsbladsy"
+msgid ""
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Print"
-msgstr "Druk"
+msgid "Please fill or check the field below"
+msgstr "Vul asb. die velde hieronder in"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No test pages"
-msgstr "Geen toetsbladsye"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "Wil u die /etc/fstab veranderinge stoor?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
+msgid "Boot Protocol"
+msgstr "Herlaaiprotokol"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Test pages"
-msgstr "Toetsbladsye"
+msgid "LVM-disks %s\n"
+msgstr "LVM-skywe %s\n"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "The package %s is needed. Install it?"
msgstr ""
-"Wil u hierdie drukker (\"%s\")\n"
-"die verstek drukker maak?"
+"Hierdie pakket moet opgradeer word\n"
+"Is u seker u wil dit deselekteer?"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Option %s out of range!"
-msgstr "Opsie %s is buite bereik!"
+msgid "On boot"
+msgstr "met herlaai"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Opsie %s moet 'n nommer wees"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Bus identification"
+msgstr "Magtiging"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Opsie %s moet 'n heeltal wees!"
+msgid "Please make a backup of your data first"
+msgstr "Rugsteun u data eers asb."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Printer default settings"
-msgstr "Drukkermodelkeuse"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
+msgid "Vatican"
+msgstr "Latvies"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr ""
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr "U het meer as een hardeskyf, waar wil u Linux installeer?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+msgid "Boot ISO"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Internetkonfigurasie"
+msgid "Eritrea"
+msgstr "Kundige area"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
+#
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Remove List"
+msgstr "Verwyder drukker"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+msgid "A customizable environment"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "OKI winprinter configuration"
-msgstr "Verander drukkerkonfigurasie"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
+msgid "Inuktitut"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
+msgid "Morocco"
msgstr ""
#: ../../printer/printerdrake.pm:1
@@ -10275,1456 +10192,1270 @@ msgid "Which printer model do you have?"
msgstr "Oor watter tipe drukker beskik u?"
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer model selection"
-msgstr "Drukkermodelkeuse"
-
-#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Reading printer database..."
-msgstr "Drukkerdata word gelees..."
+msgid "Add a new printer"
+msgstr "Voeg drukker by"
-#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Select model manually"
-msgstr "Eksterne drukkernaam"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid " All of your selected data have been "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "The model is correct"
-msgstr "Is dit korrek?"
+msgid "<-- Delete"
+msgstr "Uitwis"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
+msgid "Nepal"
msgstr ""
-#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Your printer model"
-msgstr "Eksterne drukkernaam"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Preparing printer database..."
-msgstr "Drukkerdata word gelees..."
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "cpu # "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Location"
-msgstr "Ligging"
+msgid "chunk size"
+msgstr "blokgrootte"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "Description"
-msgstr "Beskrywing"
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "instruksies voor herlaai, of 'c' vir 'n instruksielyn."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Name of printer"
-msgstr "Drukkernaam"
+msgid "Problems installing package %s"
+msgstr "Probleme met Installasue van pakket %s"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "You will receive an alert if the load is higher than this value"
msgstr ""
-"Elke drukker benodig naam (bv. lp).\n"
-"Die Beskrywing- en Liggingvelde is opsioneel.\n"
-"Hulle dien as inligting vir gebruikers."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Enter Printer Name and Comments"
+msgid ""
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Making printer port available for CUPS..."
+msgid "Add a scanner manually"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Reload partition table"
+msgstr "Reddingspartisietabel"
+
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Checking device and configuring HPOJ..."
-msgstr ""
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr "Ja, ek verlang outoaanteken met hierdie (gebruiker,werkskerm)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Photo memory card access on your HP multi-function device"
+msgid "Search for fonts in installed list"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Scanning on your HP multi-function device"
+msgid "The Local Network did not finish with `.0', bailing out."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing mtools packages..."
-msgstr "Installeer pakket %s"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Installing SANE packages..."
-msgstr "Installeer pakket %s"
+msgid "Boot"
+msgstr "Basis"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, fuzzy, c-format
-msgid "Installing HPOJ package..."
-msgstr "Installeer pakket %s"
+msgid "Tuner type:"
+msgstr "Verander tipe"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "A command line must be entered!"
-msgstr "'n Geldige URI moet verskaf word!"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Command line"
-msgstr "Domeinnaam"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "\"Menu\" key"
+msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "Pipe into command"
-msgstr "Pyk drukstuk na program"
+msgid "Security Administrator:"
+msgstr "Eksterne lpd drukkeropsies"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Detected model: %s %s"
-msgstr "%s bespeur"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "A valid URI must be entered!"
-msgstr "'n Geldige URI moet verskaf word!"
+msgid "Please enter your login"
+msgstr "Probeer asb. weer"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Printer Device URI"
-msgstr "Drukkertoestel URI"
+msgid "if set to yes, check permissions of files in the users' home."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
msgstr ""
-"U kan die URI om die drukker te bereik direk spesifiseer. Die URI moet in "
-"CUPS- of Foomatic-formaat wees. Nie alle UTI-tipes moet deur al die "
-"spoelprogramme ondersteun nie."
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Port"
-msgstr "Poort"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Printer host name or IP"
-msgstr "Drukkerbedienernaam"
+msgid "Fonts copy"
+msgstr "Formatteer floppie"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "The port number should be an integer!"
-msgstr "Die poortnommer moet heeltal wees."
+msgid "Automated"
+msgstr "Outomaties"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Drukkerbedienernaam ontbreek!"
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Do you want to test the configuration?"
+msgstr "Wil u die konfigurasie toets?"
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#, c-format
msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
msgstr ""
-"Om aan 'n sokdrukker te konnekteer, moet u die rekenaarnaam van die\n"
-"drukker voorsien en dalk ook 'n poortnommer voorsien.\n"
-"Met HP JetDirect-bedieners is die poortnommer gewoonlik 9100,\n"
-"maar dit mag anders wees met ander bedieners. Raadpleeg die handleiding\n"
-"wat saam met die hardeware gekom het."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+" to the Internet as a client.\n"
+"\n"
+"High: There are already some restrictions, and more automatic checks "
+"are run every night.\n"
+"\n"
+"Higher: The security is now high enough to use the system as a server "
+"which can accept\n"
+" connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+" should choose a lower level.\n"
+"\n"
+"Paranoid: This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+" features are at their maximum\n"
+"\n"
+"Security Administrator:\n"
+" If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+" email)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Save packages selection"
+msgstr "Stoor pakketseleksie"
+
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "Sokdrukkeropsies"
+msgid "Remove the last item"
+msgstr "Terugluslêer %s word geformateer"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Host \"%s\", port %s"
+msgid "User list to restore (only the most recent date per user is important)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ", host \"%s\", port %s"
+msgid "No net boot images created!"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Scanning network..."
-msgstr "Konneksie word begin..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer auto-detection"
-msgstr "Gebruik outobespeuring"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "NCP queue name missing!"
-msgstr "NCP-tounaam ontbreek!"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "NCP server name missing!"
-msgstr "NCP-bedienernaam ontbreek!"
+msgid "use pptp"
+msgstr "gebruik pptp"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Print Queue Name"
-msgstr "Drukkertounaam"
+msgid "Choose which services should be automatically started at boot time"
+msgstr "Kies watter dienste moet outomaties begin met herlaaityd."
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer Server"
-msgstr "Drukkerbediener"
+#, fuzzy, c-format
+msgid "Learn how to use this printer"
+msgstr "Wil u die konfigurasie toets?"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Om na 'n Netware drukker te druk moet u die volgende voorsien:\n"
-"Netware rekenaarnaam (dis nie noodwendig dieselfde as die TCP/IP\n"
-"rekenaarnaam nie); moontlik die IP adres van die drukkerbediener;\n"
-"die drukkernaam; toepaslike gebruikerskode en wagwoord."
+msgid "Configure the network now"
+msgstr "Stel netwerk op"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "NetWare Printer Options"
-msgstr "NetWare drukkeropsies"
+msgid "Choose a mirror from which to get the packages"
+msgstr "Kies 'n spieël waar die pakkette verkry kan word"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
msgstr ""
+"Die FAT-verstellingsprogram kan nie u partisie hanteer nie.\n"
+"Fout: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
+msgid "Which sector do you want to move it to?"
+msgstr "Na watter sektor wil u skuif?"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
+#: ../../interactive/stdio.pm:1
+#, fuzzy, c-format
+msgid "Do you want to click on this button?"
+msgstr "Wil u aboot gebruik?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "SECURITY WARNING!"
+msgid "Bahamas"
msgstr ""
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Samba share name missing!"
-msgstr "SAMBA-deelnaam ontbreek!"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Óf die bedienernaam óf die bediener-IP moet verskaf word!"
-
-#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Auto-detected"
-msgstr "Gebruik outobespeuring"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Workgroup"
-msgstr "Werkgroep:"
+msgid "Manual configuration"
+msgstr "Kleurkonfigurasie"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Share name"
-msgstr "Drukkernaam:"
+msgid "search"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "SMB server IP"
-msgstr "SMB-bediener IP:"
+msgid ""
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
+msgstr ""
+"Hierdie pakket laai die sleutelbordkaart soos dit in /etc/sysconfig/"
+"keyboard\n"
+"opgestel is. Dit kan vernader word met die kbdconfig nutsprogram. U moet "
+"dit\n"
+"op meeste rekenaars ongesper laat."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "SMB server host"
-msgstr "SMB-bedienernaam"
+msgid "Xpmac (installation display driver)"
+msgstr "Xpmac (installasievertoondrywer)"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
+msgid "Zeroconf host name must not contain a ."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../services.pm:1
+#, c-format
msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
msgstr ""
-"Om na 'n SMB drukker te druk moet u die volgende voorsien:\n"
-"SMB rekenaarnaam (dis nie noodwendig dieselfde as die TCP/IP rekenaarnaam\n"
-"nie); moontlik die IP adres van die drukkerbediener; die drukkernaam; \n"
-"toepaslike gebruikerskode en wagwoord; werkgroepnaam."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) drukkeropsies"
+"Syslog is die fasiliteit wat baie diensprogramme gebruik om boodskappe\n"
+"te log na 'n verskeidenheid loglêers. Dit is altyd goed om syslog te loop."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Netwerk op pad af"
+msgid "Unknown/Others"
+msgstr "Generies"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ", printer \"%s\" on server \"%s\""
+msgid "No TV Card detected!"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remote printer name missing!"
-msgstr "Eksterne drukkernam ontbreek!"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Remote host name missing!"
-msgstr "Eksterne bedienernaam ontbreek!"
+msgid "Options"
+msgstr "Opsies"
-#
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote printer name"
-msgstr "Eksterne drukkernaam"
+msgid "The printer \"%s\" is set as the default printer now."
+msgstr "Drukker \"%s\" is nou die verstekdrukker"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote host name"
-msgstr "Eksterne bedienernaam"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
msgstr ""
-"Om 'n eksterne lpd drukkertou te gebruik,moett die naam\n"
-"van die drukkkerbediener en die naam van die drukkertou\n"
-"voorsien word."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Eksterne lpd drukkeropsies"
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Manual configuration"
-msgstr "Kleurkonfigurasie"
+msgid "Auto-detected"
+msgstr "Gebruik outobespeuring"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Tik drukkertoestel URI in"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
+"Nou dat u internetkonfigurasie opgestel is,\n"
+"moet u die rekenaar opstel om dit te deel.\n"
+"LW: U benodig 'n ware netwerkkaart om 'n lokalearea netwerk (LAN) op te "
+"stel.\n"
+"\n"
+"Wil u internetdeling opstel?\n"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Op watter seriaalpoort is u modem gekoppel?"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Op watter seriaalpoort is u modem gekoppel?"
+"Geen beskikbare 1MB herlaaipartisie nie! Installasie sal voortgaan, maar u "
+"sal herlaaipartisie met DiskDrake moet skep indien u die stelsel wil "
+"herlaai."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+"Please choose the printer you want to set up or enter a device name/file "
+"name in the input line"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr ""
+msgid "Refuse"
+msgstr "Weier"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr ""
+msgid "HFS"
+msgstr "HFS"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
msgstr ""
#
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "The following printer was auto-detected. "
-msgstr "Dei volgende pakkette gaan verwyder word"
+msgid "Remote Printers"
+msgstr "Eksterne drukker"
-#: ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
-msgstr ""
+msgid "Creating and formatting file %s"
+msgstr "Lêer %s word geskep en formatteer"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Please choose the printer you want to set up or enter a device name/file "
-"name in the input line"
+msgid "if set to yes, check additions/removals of sgid files."
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Available printers"
-msgstr "Plaaslike drukker"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "No printer found!"
-msgstr "Plaaslike drukker"
+msgid "Choose an existing LVM to add to"
+msgstr "Kies 'n bestaande LVM om by toe te voeg"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "You must enter a device or file name!"
-msgstr "Tik drukkertoestel URI in"
+msgid "xfs restart"
+msgstr "beperk"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Local Printer"
-msgstr "Plaaslike drukker"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No partition available"
+msgstr "geen beskikbare partisies"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "USB printer \\#%s"
-msgstr "Geen drukker"
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Use the scanners on hosts: "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "Drukkerbedienernaam"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Unselected All"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Eksterne SMB/Windows 95/98/NT-drukker"
+msgid "Domain Name Resolver"
+msgstr "Domeinnaam"
-#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Netwerkdrukker (sok)"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Encryption key (again)"
+msgstr ""
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "%s bespeur"
+#, c-format
+msgid "Samba share name missing!"
+msgstr "SAMBA-deelnaam ontbreek!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "True Type install done"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Eksterne SMB/Windows 95/98/NT-drukker"
+msgid "Detection in progress"
+msgstr "Op poort %s bespeur"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ", network printer \"%s\", port %s"
+msgid "Build Whole Kernel -->"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
+msgid "Welcome to %s"
+msgstr "Welkom by %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr ""
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "Sit asb. die module-opdateringsfloppie in aandrywer %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
+msgid "Bootsplash"
msgstr ""
-#
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Eksterne drukker"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
msgid ""
+"The following printer\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
+"%s%s\n"
+"is directly connected to your system"
+msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
+#, fuzzy, c-format
+msgid "Printer sharing on hosts/networks: "
+msgstr "Druk"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
+"In sekere gevalle sal die %s drywer ekstra inligting benodig, alhoewel in\n"
+"meeste gevalle dit nie nodig wees nie. Wil u ekstra opsies voorsien od moet\n"
+"rekenaar self daarvoor aftas. In uitsonderlike gevalle mag die rekenaar\n"
+"ophang, maar dit sal nie skade veroorsaak nie."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
+msgid "Not the correct CD label. Disk is labelled %s."
+msgstr ""
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
"\n"
+"%s\n"
"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
-#, c-format
-msgid ")"
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid " on "
-msgstr ""
+"Click on Configure to launch the setup wizard."
+msgstr "Internetkonneksiedeling"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "("
+msgid "Cuba"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Configuring printer ..."
-msgstr "Konfigureer drukker"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
msgid "Searching for new printers..."
msgstr "Plaaslike drukker"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Belize"
+msgstr "Verstel Grootte"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
+msgid " (multi-session)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
+msgid "Kernel Boot Timeout"
+msgstr "Tydsbeperking vir stelselkernlaai"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
+"U videokaart kan slegs 3D-versnelling onder XFree %s ondersteun.\n"
+"DIt word wel onder XFree %s ondersteun wat dalk beter 2D-ondersteuning het."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Wil u die konneksie met herlaaityd aanskakel?"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "Die DrakX partisioneringsassistent het die volgende oplossings:"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr ""
-"Wil u hierdie drukker (\"%s\")\n"
-"die verstek drukker maak?"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Hungarian"
+msgstr "Hongaars"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
msgstr ""
+"Kies u internetdiensvoorsiener.\n"
+"Indien nie in die lys nie kies Ongelys"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr "Op watter seriaalpoort is u modem gekoppel?"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Automatic time synchronization (using NTP)"
+msgstr "Outotydsinkronisasie met NTP"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr ""
+msgid "8 MB"
+msgstr "8 MB"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
+msgid "LDAP Server"
+msgstr "LDAP-bediener"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
msgstr ""
+"PCMCIA is gewoonlik nodig om ondersteuning te verleen aan\n"
+"toestelle soos ethernet en modems in skootrekenaars. Dit sal nie\n"
+"gelaai word, behalwe as dit konfigureer is nie en dit is derhalwe\n"
+"veilig om op rekenaars te hê wat dit nie nodig het nie."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
+#: ../../network/tools.pm:1
+#, c-format
+msgid "Choose your country"
+msgstr "Kies u land"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../standalone/drakbackup:1
+#, c-format
msgid ""
-"The following printers\n"
"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "and %d unknown printers"
-msgstr "Voeg drukker by"
+"- System Files:\n"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "and one unknown printer"
-msgstr "Voeg drukker by"
+msgid "Standalone Tools"
+msgstr "Konsole hulpprogramme"
#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Checking your system..."
-msgstr "Watter drukkerstelsel verlang u?"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Restarting CUPS..."
-msgstr "Laai dit"
+msgid "Where"
+msgstr "Wiel"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
+msgid "but not matching"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Examples for correct IPs:\n"
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Is dit korrek?"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Server IP missing!"
-msgstr "NCP-bedienernaam ontbreek!"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Configuring PCMCIA cards..."
+msgstr "Stel PCMCIA op..."
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr ""
+msgid "kdesu missing"
+msgstr "kdesu is weg"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
+msgid "Encryption key"
msgstr ""
-#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Eksterne CUPS-drukker"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected server"
-msgstr "Verwyder tou"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Edit selected server"
-msgstr "%s bespeur"
+#: ../../lang.pm:1
+#, c-format
+msgid "Christmas Island"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Add server"
-msgstr "Voeg gebruiker by"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr "Installasie van herlaaiprogram het gefaal a.g.v. hierdie fout: "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
+msgid "EIDE/SCSI channel"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "IP address of host/network:"
-msgstr ""
+msgid "Set this printer as the default"
+msgstr "Maak hierdie die verstekdrukker"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
+msgid "partition %s"
+msgstr "partisie %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr ""
+msgid "Paranoid"
+msgstr "Paranoïes"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Host/network IP address missing."
+msgid "NIS"
+msgstr "NIS"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "<-- Del User"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
+msgid "Location on the bus"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Sharing of local printers"
+msgid "No printer found!"
msgstr "Plaaslike drukker"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected host/network"
-msgstr "Verwyder tou"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Edit selected host/network"
+msgid "the vendor name of the device"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Add host/network"
-msgstr ""
+msgid "Erase entire disk"
+msgstr "Wis hele skyf"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
+msgid " (Default)"
+msgstr " (Verstek)"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Automatic correction of CUPS configuration"
+msgid "Automatic reconfiguration"
msgstr "Outomatiese CUPS konfigurasie"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
+msgid "Receiving Speed:"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Japanese text printing mode"
-msgstr "Stel netwerk op"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
+msgid "Turks and Caicos Islands"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "None"
-msgstr "Klaar"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Additional CUPS servers: "
-msgstr "CUPS-bediener IP:"
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "No remote machines"
-msgstr "(op hierdie rekenaar)"
+msgid "permissions"
+msgstr "partisie %s"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Custom configuration"
-msgstr "Kleurkonfigurasie"
+#, c-format
+msgid "<- Previous"
+msgstr "<- Vorige"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Druk"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Internet Connection Sharing configuration"
+msgstr "Internetkonneksiedelingkonfigurasie"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr ""
+msgid "Toggle between flat and group sorted"
+msgstr "Skakel tussen plat- en groepsortering"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "The printers on this machine are available to other computers"
+msgid "Themes"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
+msgid "Options: %s"
+msgstr "Opsies: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
+"U gebruik huidig %s as herlaaibestuurder.\n"
+"Kliek op Konfigureer om opstelassistent te laai."
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "CUPS printer configuration"
+msgid "OKI winprinter configuration"
msgstr "Verander drukkerkonfigurasie"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgid "Saint Helena"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
+msgid "Security Level"
+msgstr "Sekuriteitsvlak word gestel."
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
msgid ""
+"Some steps are not completed.\n"
"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
msgstr ""
+"Bepaalde stappe is nie afgehandel nie.\n"
"\n"
-"Met 'n eksterne CUPS-bediener, hoef u glad nie 'n drukker hier\n"
-"op te stel nie; drukkers wod outomaties bespeur.\n"
-"Indien u twyfel, kies \"Eksterne CUPS-drukker\"."
+"Wil u werklik nou aborteer?"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "How is the printer connected?"
-msgstr "Hoe is die drukker gekonekteer?"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Sudan"
+msgstr "SunOS"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Select Printer Connection"
-msgstr "Kies drukkerkonneksie"
+msgid "Polish (qwertz layout)"
+msgstr "Pools (QWERTZ uitleg)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
+msgid "Syria"
msgstr ""
-#: ../../security/help.pm:1
+# NOTE: this message will be displayed at boot time; that is
+# only the ascii charset will be available on most machines
+# so use only 7bit for this message (and do transliteration or
+# leave it in English, as it is the best for your language)
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
#, c-format
msgid ""
-"Arguments: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
+"\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
"\n"
-"Set the user umask."
msgstr ""
+"Welkom by %s die bedryfstelselkeuseprogram!\n"
+"\n"
+"Kies u bedryfstelsel uit die bogelyste opsies of wag\n"
+"%d sekonde vir die verstekopsie.\n"
+"\n"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (val)\n"
-"\n"
-"Set the shell timeout. A value of zero means no timeout."
-msgstr ""
+msgid "Portuguese"
+msgstr "Portugees"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (size)\n"
-"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
+msgid "Loopback file name: "
+msgstr "Teruglus lêernaam:"
-#: ../../security/help.pm:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "IP-adres moet in 1.2.3.4. formaat wees"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Serbia"
+msgstr "seriaal"
+
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
+msgid "Newzealand"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "if set to yes, check open ports."
-msgstr ""
+msgid "This directory should remain within the root filesystem"
+msgstr "Hierdie lêergids moet altyd in die wortellêerstelsel bly"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
+msgid "CapsLock key"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr ""
+msgid "Install bootloader"
+msgstr "Installeer herlaaistelsel"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
+msgid "Select the memory size of your graphics card"
+msgstr "Kies die geheue grootte van u videokaart"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, reports check result to tty."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
+msgid "Dynamic IP Address Pool:"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
+msgid "LVM name?"
+msgstr "LVM naam?"
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "if set to yes, run chkrootkit checks."
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
-msgstr ""
+msgid "Found %s %s interfaces"
+msgstr "Het %s %s koppelvlakke gevind"
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
+msgid "sticky-bit"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Post Install"
+msgstr "Installasie"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The internal domain name"
+msgstr "Nuwe drukkernaam"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr ""
+msgid "Card IRQ"
+msgstr "Kaart IRQ"
#: ../../security/help.pm:1
#, c-format
msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
+"Arguments: (umask)\n"
+"\n"
+"Set the user umask."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
#, c-format
-msgid "if set to yes, run the daily security checks."
+msgid "logdrake"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
+msgid ""
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "if set to yes, report unowned files."
-msgstr ""
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "Kies die sagteskyfaandrywer wat u wil gebruik"
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the root umask."
-msgstr ""
+msgid "LILO with text menu"
+msgstr "LILO met tekskieskaart"
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
-"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+msgid "Everything (no firewall)"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
+msgid "You must specify a kernel image"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+msgid ", multi-function device on USB"
msgstr ""
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
+#: ../../interactive/newt.pm:1
+#, fuzzy, c-format
+msgid "Do"
+msgstr "Klaar"
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "Spieël word gekontak vir die lys van pakkette"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
-msgstr ""
+msgid "Lithuanian AZERTY (old)"
+msgstr "Lituanies AZERTY (oud)"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
-msgstr ""
+msgid "Brazilian (ABNT-2)"
+msgstr "Brasiliaans (ABNT-2)"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
+msgid "IP address of host/network:"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
+#, fuzzy, c-format
+msgid "System installation"
+msgstr "SILO installasie"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
+msgid "Saint Vincent and the Grenadines"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
+msgid "/File/_Open"
+msgstr "/Lêer/_Oopmaak"
#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
+"The argument specifies if clients are authorized to connect\n"
+"to the X server on the tcp port 6000 or not."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Location of auto_install.cfg file"
+msgstr "Outoinstallasieskyf word geskep."
+
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
+msgid "Open Firmware Delay"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Hungary"
+msgstr "Hongaars"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Total progess"
+msgstr "Toetsbladsye"
+
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Color configuration"
+msgstr "Kleurkonfigurasie"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
+msgid "New Zealand"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "please choose the date to restore"
+msgstr "Wat is u muistoestel?"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
-msgstr ""
+msgid "Switching from ext2 to ext3"
+msgstr "Oorskakeling van ext2 na ext3"
-#: ../../security/help.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
-msgstr ""
+msgid "LPRng"
+msgstr "LPRng"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
+msgid "Netherlands Antilles"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"The argument specifies if clients are authorized to connect\n"
-"to the X server on the tcp port 6000 or not."
+msgid "Browse to new restore repository."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "and %d unknown printers"
+msgstr "Voeg drukker by"
+
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
+msgid "No ISDN PCI card found. Please select one on the next screen."
+msgstr "Geen ISDN PCI-kaart gevind nie. Kies asb. een op die volgende skerm."
-#: ../../security/help.pm:1
+#: ../../common.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-msgstr ""
+msgid "GB"
+msgstr "GB"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
+msgid "Please give a user name"
+msgstr "Gee asb. 'n gebruikerskode"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
+msgid "Enable CD Boot?"
+msgstr "Laat CD-herlaai toe?"
-#: ../../security/help.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
+msgid " enter `void' for void entry"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
+msgid "on Hard Drive"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Winmodem connection"
+msgstr "Normale modemkonneksie"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
"\n"
-" Accept/Refuse broadcasted icmp echo."
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
msgstr ""
#: ../../security/help.pm:1
@@ -11732,743 +11463,543 @@ msgstr ""
msgid ""
"Arguments: (arg)\n"
"\n"
-"Accept/Refuse bogus IPv4 error messages."
+"Set the password history length to prevent password reuse."
msgstr ""
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Security Administrator (login or email)"
+msgid "Now, you can run xawtv (under X Window!) !\n"
msgstr ""
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Use libsafe for servers"
-msgstr "Selekteer opsies vir bediener"
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr "Nie genoeg ruilarea om die installasie te voltooi. Voeg asb. by."
-#: ../../security/level.pm:1
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Security level"
-msgstr "Sekuriteitsvlak word gestel."
+msgid "%s on %s"
+msgstr "Poort"
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Please choose the desired security level"
-msgstr "Gebruik sekuriteitsvlak"
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "DrakSec Basic Options"
-msgstr "Opsies"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Which is your timezone?"
+msgstr "Wat is u tydsone?"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Hierdie is Vlak-4 sekuriteit, maar die stelsel is afgeslote.\n"
-"Sekuriteitseienskappe is maksimaal."
+msgid "Guinea"
+msgstr "Algemeen"
-#: ../../security/level.pm:1
+#: ../../network/tools.pm:1
#, fuzzy, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"Met hierdie sekuriteitsvlak, kan die stelsel as 'n bediener gebruik word.\n"
-"Die sekuriteit is goed genoeg sodat 'n stelsel konneksies wat baie kliënte\n"
-"af kan aanvaar."
+msgid "The system is now connected to the Internet."
+msgstr "Die stelsel is nou aan die internet gekonnekteer."
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
+msgid "South Georgia and the South Sandwich Islands"
msgstr ""
-"Hierdie is die standaard sekuriteitsvlak wat aanbeveel word vir rekenaars\n"
-"wat aan die internet as 'n kliënt konnekteer. Daar is heelwat "
-"sekuriteitstoetse."
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
+msgid "Japan (broadcast)"
msgstr ""
-"Wagwoorde is nou ontsper, maar gebruik as 'n netwerkrekenaar word nie "
-"aanbeveel nie."
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
+msgid "Mozambique"
msgstr ""
-"Hierdie vlak moet met sorg gebruik word. Dit maak 'n stelsel baie maklik\n"
-"om te gebruik, maar is baie sensitief. Dit moet nie gebruik vir 'n rekenaar\n"
-"wat aan ander rekenaars of die internet gekoppel is nie. Daar is geen "
-"wagwoord\n"
-"toegang nie."
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Paranoid"
-msgstr "Paranoïes"
+msgid "Icon"
+msgstr "Ikoon"
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Higher"
-msgstr "Hoog"
+msgid "Please choose what you want to backup"
+msgstr "Kies die pakkette wat u wil installeer"
-#: ../../security/level.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "High"
-msgstr "Hoog"
+msgid "256 colors (8 bits)"
+msgstr "256 kleure (8 bis)"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Poor"
-msgstr "Swak"
+msgid "Read-write"
+msgstr "Lees-skryf"
-#: ../../security/level.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Welcome To Crackers"
-msgstr "Krakers welkom"
+msgid "Size: %s\n"
+msgstr "Grootte: %s\n"
-#: ../../standalone/XFdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Teken asb. weer in %s om veranderinge te aktiveer"
+msgid "Hostname: "
+msgstr "Bedienernaam:"
-#: ../../standalone/XFdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Teken uit en gebruik dan Ctrl-Alt-Backspace"
+msgid "Chunk size %s\n"
+msgstr "Blokgrootte %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgid "Build the future of Linux!"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Local Printer"
+msgstr "Plaaslike drukker"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
+msgid ""
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Etherboot ISO image is %s"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "No floppy drive available!"
-msgstr "Geen sagteskyaandrywer beskikbaar nie"
-
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Floppy can be removed now"
-msgstr ""
+msgid "ADSL connection"
+msgstr "ADSL konneksie"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Couldn't access the floppy!"
+msgid "No configuration, please click Wizard or Advanced.\n"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Please insert floppy disk:"
-msgstr "Sit 'n herlaaiskyf wat gebruik is, in aandrywer %s"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Write Config"
-msgstr "herkonfigureer"
-
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr ""
+msgid "Error!"
+msgstr "Fout!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "dhcpd Server Configuration"
-msgstr "Sluit konfigurasie af"
+msgid "cable connection detected"
+msgstr "Kabelkonneksie bespeur"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "IP Range End:"
+msgid "Permission denied transferring %s to %s"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "IP Range Start:"
+msgid "/_Report Bug"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Name Servers:"
-msgstr "NIS-bediener"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Resize"
+msgstr "Verstel Grootte"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Domain Name:"
-msgstr "Domeinnaam"
+msgid "Dominica"
+msgstr "NIS-domein"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Broadcast Address:"
+msgid "Please enter the device name to use for backup"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Subnet Mask:"
-msgstr ""
+msgid "Resolution: %s\n"
+msgstr "Resolusie: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Routers:"
+msgid "matching"
msgstr ""
-#
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Netmask:"
-msgstr "Netmasker"
-
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
#, c-format
-msgid "Subnet:"
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
+"Kies asb. die korrekte poort. Onthou dat COM1 onder MS Windows \n"
+"ttyS0 onder GNU/Linux is."
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "dhcpd Config..."
-msgstr "Konfigurasie in aabou..."
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Delete Client"
-msgstr "DHCP-Kliënt"
+#
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "The following packages are going to be removed"
+msgstr "Dei volgende pakkette gaan verwyder word"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "<-- Edit Client"
-msgstr "DHCP-Kliënt"
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#, c-format
+msgid "Connect to the Internet"
+msgstr "Konnekteer aan die internet"
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Add Client -->"
-msgstr ""
+msgid "Use existing partitions"
+msgstr "Gebruik bestaande partisies"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Allow Thin Clients"
-msgstr "DHCP-Kliënt"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Canadian (Quebec)"
+msgstr "Kanadees (Quebec)"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Thin Client"
-msgstr "DHCP-Kliënt"
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Mouse device: %s\n"
+msgstr "Muistoestel: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "No net boot images created!"
+msgid "Reselect correct fonts"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "type: %s"
-msgstr "Tipe:"
-
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "<-- Del User"
+msgid ""
+"Options Description:\n"
+"\n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
+"\n"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Add User -->"
-msgstr "Voeg gebruiker by"
-
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Delete All NBIs"
-msgstr "Selekteer lOer"
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "We are now going to configure the %s connection."
+msgstr "Ons gaan nou die %s konneksie herkonfigureer."
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, fuzzy, c-format
-msgid "<-- Delete"
-msgstr "Uitwis"
+msgid "MandrakeExpert Corporate"
+msgstr "Kundige"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "This will take a few minutes."
+msgid ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Build All Kernels -->"
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Write protection"
+msgstr "Gebruik outobespeuring"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "No NIC selected!"
-msgstr "Nie gekonnekteer nieKabelkonneksie"
+msgid "You've not selected any font"
+msgstr "Verwyder tou"
-#: ../../standalone/drakTermServ:1
+#: ../../steps.pm:1
#, c-format
-msgid "Build Single NIC -->"
-msgstr ""
+msgid "Language"
+msgstr "Kies u taal"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No kernel selected!"
-msgstr ""
+msgid "Printer model selection"
+msgstr "Drukkermodelkeuse"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Build Whole Kernel -->"
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
msgstr ""
+"Alle data om hierdie partisie %s sal uitgewis word na verandering van die "
+"partisietipe"
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
#, c-format
-msgid "Boot ISO"
-msgstr ""
+msgid "%d seconds"
+msgstr "%d sekondes"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Boot Floppy"
-msgstr ""
+msgid "Insert a blank floppy in drive %s"
+msgstr "Sit 'n leë floppie in aandrywer %s"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
-"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
-"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
-"\n"
-msgstr ""
+msgid "A valid URI must be entered!"
+msgstr "'n Geldige URI moet verskaf word!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+msgid "Found \"%s\" interface do you want to use it ?"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
+msgid "Re-configure interface and DHCP server"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../harddrake/sound.pm:1
#, fuzzy, c-format
-msgid "Add/Del Clients"
-msgstr "DHCP-Kliënt"
+msgid "Sound configuration"
+msgstr "Konfigurasie"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Add/Del Users"
-msgstr "Voeg gebruiker by"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Photo test page"
+msgstr "Fototoetsbladsy"
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Net Boot Images"
-msgstr ""
+msgid "Custom disk partitioning"
+msgstr "Gespesialiseerde skyfpartisionering"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Etherboot Floppy/ISO"
+msgid "Enter Printer Name and Comments"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Stop Server"
-msgstr "NIS-bediener"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Start Server"
-msgstr "NIS-bediener"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Disable Server"
-msgstr "Datbasis"
-
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Enable Server"
-msgstr "Datbasis"
+msgid ""
+"The following printers\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "Dra drukkerkonfigurasie oor"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Remove the last item"
-msgstr "Terugluslêer %s word geformateer"
+msgid "type: %s"
+msgstr "Tipe:"
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Add an item"
-msgstr "Voeg 'n gebruiker by"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovakian (QWERTY)"
+msgstr "Slovaaks (QWERTY)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/draksound:1
#, fuzzy, c-format
-msgid "Auto Install"
-msgstr "Installasie"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Die floppie is sukselvol geskep.\n"
-"U kan nou weer 'n installasie uitspeel."
+msgid "No Sound Card detected!"
+msgstr "Nie gekonnekteer nieKabelkonneksie"
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "Congratulations!"
-msgstr "Geluk!"
+msgid "Mouse Port"
+msgstr "Muispoort"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
msgstr ""
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Creating auto install floppy"
-msgstr "Outoinstallasieskyf word geskep."
+msgid "Ftp Server"
+msgstr "NIS-bediener"
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
#, c-format
-msgid "manual"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable msec hourly security check."
msgstr ""
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
+msgid "%s fonts conversion"
msgstr ""
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Outomatiese Stappe Konfigurasie"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the type of bus on which the mouse is connected"
+msgstr "Aan watter seriaalpoort is u muis gekoppel?"
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "replay"
-msgstr "Herspeel"
+msgid "Uganda"
+msgstr "Opgradeer"
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+"Arguments: (size)\n"
"\n"
-"Do you want to continue?"
+"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "Outoinstallasiekonfigurasieprogram"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Ek kan nie die nodige herlaaibeeld '%s' kry nie."
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Error!"
-msgstr "Fout!"
-
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
"\n"
-"Restore Backup Problems:\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
+"\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
+"\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
+"\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
+"\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
+"\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
+"\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
+"\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
+"\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
+"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
+"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
+"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
+msgid "Comoros"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Description:\n"
"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
+"We are now going to configure the %s connection.\n"
"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"Press OK to continue."
+msgstr ""
"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
"\n"
"\n"
-msgstr ""
+"Ons gan nou die %s konneksie konfigureer.\n"
+"\n"
+"\n"
+"Drk OK om voort te gaan."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+msgid "Yaboot mode"
+msgstr "Yaboot metode"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Generiese 3-knop muis"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select another media to restore from"
+msgstr "Wat is u muistoestel?"
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Software Manager"
+msgstr "Drukkernaam:"
+
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"restore description:\n"
+"Restore Description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
@@ -12480,4603 +12011,5110 @@ msgid ""
"\n"
" - Incremental Backups:\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
+" - Differential Backups:\n"
" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
+msgid "Re-submit"
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
+msgid "CD in place - continue."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Drakbackup"
-msgstr ""
+msgid "KB"
+msgstr "KB"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Restore"
-msgstr "Herstel vanaf lêer"
+msgid "Network & Internet"
+msgstr "Netwerkkoppelvlak"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Now"
-msgstr "Stel lêerstelsels op"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Lituanies \"foneties\" QWERTY"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Advanced Configuration"
-msgstr "Sluit konfigurasie af"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Net Boot Images"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Wizard Configuration"
-msgstr "Konfigurasie"
+msgid "Sharing of local scanners"
+msgstr "Plaaslike drukker"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "View Backup Configuration."
-msgstr "Netwerkkonfigurasie"
+#: ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Now from configuration file"
-msgstr "Netwerkkonfigurasie"
+#: ../../services.pm:1
+#, c-format
+msgid "Services and deamons"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Drakbackup Configuration"
-msgstr "Netwerkkonfigurasie"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Remote host name missing!"
+msgstr "Eksterne bedienernaam ontbreek!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Total Progress"
+msgid "with /usr"
msgstr ""
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Sending files..."
-msgstr "Stoor in lêer"
+msgid "Network"
+msgstr "Netwerkkoppelvlak"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "files sending by FTP"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup other files"
-msgstr "Korrupte rugsteunlêer"
+#: ../../any.pm:1
+#, c-format
+msgid "This password is too simple"
+msgstr "Die wagwoorde is te eenvoudig"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovakian (QWERTZ)"
+msgstr "Slovaaks (QWERTZ)"
+
+#: ../../share/advertising/06-development.pl:1
+#, c-format
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Truly minimal install (especially no urpmi)"
+msgstr ""
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Backup user files"
-msgstr "Korrupte rugsteunlêer"
+msgid ""
+" Transfer \n"
+"Now"
+msgstr "Oordrag"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Backup system files"
-msgstr "Korrupte rugsteunlêer"
+msgid "Use daemon"
+msgstr "Gebruikerskode"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
#, c-format
-msgid "Under Devel ... please wait."
+msgid "Authentication"
+msgstr "Magtiging"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Additional CUPS servers: "
+msgstr "CUPS-bediener IP:"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Please select data to backup..."
-msgstr "Kies asb. 'n taal om te gebruik."
+msgid "Where do you want to mount %s?"
+msgstr "Waar wil u toestel %s heg?"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Please select media for backup..."
-msgstr "Kies asb. 'n taal om te gebruik."
+msgid "Restore Via Network"
+msgstr "Herstel vanaf lêer"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Please select data to restore..."
-msgstr "Kies asb. 'n taal om te gebruik."
+msgid "Algeria"
+msgstr "seriaal"
-#
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Die volgende pakkette gaan installeer word"
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd-size"
+msgstr "Initrd-grootte"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
+msgid "\tBackups use tar and gzip\n"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Next"
-msgstr "Teks"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "2 MB"
+msgstr "2 MB"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Previous"
-msgstr "<- Vorige"
+#: ../../standalone.pm:1
+#, c-format
+msgid ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Save"
-msgstr "Toestand"
+msgid "Setting Default Printer..."
+msgstr "Verstek drukker"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Build Backup"
-msgstr "Korrupte rugsteunlêer"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Interface %s (using module %s)"
+msgstr "Koppelvlak %s (met module %s)"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Progress"
-msgstr "Herstel vanaf lêer"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Name: %s\n"
+msgstr "Naam: %s\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Restore From Catalog"
-msgstr "Reddingspartisietabel"
+msgid "Generating preview ..."
+msgstr "Toestel word afgetas..."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Browse to new restore repository."
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "CD in place - continue."
+msgid "serial"
+msgstr "seriaal"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "DVD-ROM"
msgstr ""
-#
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Custom Restore"
-msgstr "Aangepaste"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Georgian (\"Latin\" layout)"
+msgstr "Georgies (Latynse uitleg)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Restore all backups"
+msgid "Get the best items with Mandrake Linux Strategic partners"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Failed..."
-msgstr "Herstel vanaf lêer"
-
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Files Restored..."
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Path or Module required"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Hostname required"
-msgstr "Bedienernaam:"
+msgid "Kenya"
+msgstr "Sleutelbord"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``Unmount'' first"
+msgstr "Gebruik ``Ontheg'' eerste"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Username required"
-msgstr "Gebruikerskode"
+msgid "Installing mtools packages..."
+msgstr "Installeer pakket %s"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Password required"
-msgstr "Wagwoord"
+msgid "You must specify a root partition"
+msgstr "U moet oor 'n ruilpartisie beskik"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "first step creation"
+msgstr "herlaaiskyfskepping"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "Host Path or Module"
+msgid "Both Shift keys simultaneously"
msgstr ""
-#
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Host Name"
-msgstr "Rekenaarnaam"
+msgid "Select a scanner model"
+msgstr "Selekteer 'n videokaart"
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr ""
+msgid "LPRng - LPR New Generation"
+msgstr "LPRng - Nuwe generasie LPR"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Restore Via Network"
-msgstr "Herstel vanaf lêer"
+msgid "Drakbackup Configuration"
+msgstr "Netwerkkonfigurasie"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
+msgid "Save as.."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore From Tape"
-msgstr "Reddingspartisietabel"
-
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
+msgid "Korea (North)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
-msgstr ""
+msgid "Autologin"
+msgstr "Outointeken"
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
#, fuzzy, c-format
-msgid "Restore From CD"
-msgstr "Herstel vanaf floppie"
+msgid "System configuration"
+msgstr "Kleurkonfigurasie"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Backup files not found at %s."
+msgid "Domain Admin Password"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#: ../../share/advertising/05-desktop.pl:1
+#, c-format
msgid ""
-"Change\n"
-"Restore Path"
-msgstr "Herstel vanaf lêer"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"Restore Selected\n"
-"Files"
-msgstr "Verwyder tou"
+msgid "Configuring printer ..."
+msgstr "Konfigureer drukker"
-#: ../../standalone/drakbackup:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Remove user directories before restore."
-msgstr ""
+msgid "MB"
+msgstr "MB"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
+msgid "if set to yes, run some checks against the rpm database."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "select path to restore (instead of /)"
-msgstr "Wat is u muistoestel?"
+#: ../../lang.pm:1
+#, c-format
+msgid "Virgin Islands (British)"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Restore Other"
-msgstr "Herstel vanaf lêer"
+msgid "Bermuda"
+msgstr "Duits"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Users"
-msgstr "Herstel vanaf lêer"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "click here if you are sure."
+msgstr ""
#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore system"
-msgstr "Installeer stelsel"
+#, c-format
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Other Media"
-msgstr "Ander"
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, fuzzy, c-format
-msgid "Select another media to restore from"
-msgstr "Wat is u muistoestel?"
+msgid "Remove"
+msgstr "Verwyder drukker"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the directory where backups are stored"
+msgid "Lesotho"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore from Hard Disk."
-msgstr "Herstel vanaf floppie"
+#: ../../ugtk2.pm:1
+#, c-format
+msgid "utopia 25"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use quota for backup files."
-msgstr "Korrupte rugsteunlêer"
+#: ../../printer/main.pm:1
+#, c-format
+msgid "Pipe job into a command"
+msgstr "Pyk drukstuk na program"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
+msgid "new dynamic device name generated by core kernel devfs"
msgstr ""
-#
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter the directory to save:"
-msgstr "Toets asb. die muis"
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Yes"
+msgstr "Ja"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use Hard Disk to backup"
-msgstr "Korrupte rugsteunlêer"
+#: ../../lang.pm:1
+#, c-format
+msgid "Cote d'Ivoire"
+msgstr ""
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "Which protocol do you want to use?"
+msgstr "Watter protokol verlang u?"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "please choose the date to restore"
-msgstr "Wat is u muistoestel?"
+msgid "Restore Progress"
+msgstr "Herstel vanaf lêer"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Backup the system files before:"
-msgstr "Korrupte rugsteunlêer"
+msgid "Estonia"
+msgstr "Estoniaans"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
+msgid "Choose the host on which the local scanners should be made available:"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "OK to restore the other files."
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
msgstr ""
+"U het 'n gat die partisietabel maar ek kan dit nie gebruik nie.\n"
+"Die enigste oplossing is om die primêre partisie te skuif sodat die gat\n"
+"langs die ekstensie partisies is"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid " Restore Configuration "
-msgstr "Netwerkkonfigurasie"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid " Successfuly Restored on %s "
-msgstr ""
+msgid "Channel"
+msgstr "Kanselleer"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid " All of your selected data have been "
-msgstr ""
+msgid "Add"
+msgstr "Voeg by"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Backup files are corrupted"
-msgstr ""
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "Geen internetkonneksiedeling is al gekonfigureer nie."
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Op watter seriaalpoort is u modem gekoppel?"
+msgid " Error while sending mail. \n"
+msgstr "Fout met die les van lêer %s"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
+msgid "Keyboard"
+msgstr "Sleutelbord"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"List of data to restore:\n"
-"\n"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
+msgid ""
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "\t-Network by webdav.\n"
-msgstr ""
+msgid "Choose the connection you want to configure"
+msgstr "Kies die konneksie wat u wil konfigureer"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Please wait, setting security level..."
+msgstr "Sekuriteitsvlak word gestel."
+
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "\t-Network by rsync.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr ""
+msgid "Configuring network device %s"
+msgstr "Konfigureer netwerktoestel %s"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "activated"
+msgstr "Aktiveer nou dadelik"
+
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Please choose which network interface will be used for the dhcp server."
+msgstr "Kies asb. die netwerkkoppelvlak wat u wil gebruik vir die internet."
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr ""
+msgid "Finding packages to upgrade..."
+msgstr "Soek vir pakkette om op te gradeer."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\t-Tape \n"
-msgstr ""
+msgid "Mount point: "
+msgstr "Hegpunt:"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "\t-CDROM.\n"
+msgid "parse all fonts"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "With X"
+msgstr "Wag"
+
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "\t-Hard drive.\n"
-msgstr ""
+msgid "Multi-head configuration"
+msgstr "Multikopkonfigurasie"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "No browser available! Please install one"
+msgstr "U kan ander tale selekteer wat na installasie beskikbaar sal wees."
+
+#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
"\n"
-"- Daemon (%s) include:\n"
+"%s"
msgstr ""
+"Behou die veranderinge?\n"
+"Huidige konfigurasie is:\n"
+"\n"
+"%s"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "U kan nie ReiserFS vir partisies kleiner as 32MB gebruik nie"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "\tBackups use tar and bzip2\n"
+msgid ""
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
+"Die 'rwho' protokol laat eksterne gebruikers toe om te sien wie\n"
+"ingeteken is op 'n rkeneaar wat die 'rwho' diensprogram loop. (Amper soos "
+"'finger')."
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "\tDo not include System Files\n"
-msgstr ""
+msgid "Domain name"
+msgstr "Domeinnaam"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Opsies"
+msgid "Sharing of local printers"
+msgstr "Plaaslike drukker"
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Available printers"
+msgstr "Plaaslike drukker"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Empty"
+msgstr "Leeg"
+
+#: ../../help.pm:1
#, c-format
msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
-"- Save via %s on host: %s\n"
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
+"\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
+"\n"
+"\n"
+"\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "\t\tErase=%s"
+msgid "text width"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
+msgid "Where do you want to mount device %s?"
+msgstr "Waar wil u toestel %s heg?"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid " (multi-session)"
+msgid "The default lease (in seconds)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid " on device: %s"
-msgstr "Muistoestel: %s\n"
+msgid "Interface \"%s\""
+msgstr "Koppelvlak %s"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "RW"
+msgid "With basic documentation (recommended!)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"\n"
-"- Burn to CD"
-msgstr ""
+msgid "1 button"
+msgstr "1 knop"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"- Delete hard drive tar files after backup.\n"
+"There are %d unknown printers directly connected to your system"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
+msgid "Test"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"- Other Files:\n"
+"Allow/Forbid direct root login."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Korea"
+msgstr "Nog"
+
+#: ../../interactive/stdio.pm:1
+#, fuzzy, c-format
+msgid "Your choice? (default `%s'%s) "
+msgstr "U keuse? (verstek %s) "
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Raw printer"
+msgstr "Geen drukker"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"\n"
-"- User Files:\n"
+msgid "official vendor name of the cpu"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Vendor"
+msgstr "Herroep"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
+msgid "Interface %s"
+msgstr "Koppelvlak %s"
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
+msgid "Configure mouse"
+msgstr "Stel muistoestel op"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Select user manually"
-msgstr ""
+msgid "Choose the mount points"
+msgstr "Kies die hegpunte"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Backup Users"
+msgid "OK"
+msgstr "OK"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Yugoslavian (latin)"
+msgstr "Jugoslaavs (latynse uitleg)"
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Installing"
+msgstr "Besig met installasie"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Launch userdrake"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Backup system"
-msgstr "Stel lêerstelsels op"
+msgid "Is this an install or an upgrade?"
+msgstr "Is hierdie 'n installasie of opgradering?"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Please choose what you want to backup"
-msgstr "Kies die pakkette wat u wil installeer"
+msgid "ISDN card"
+msgstr "Interne ISDN-kaart"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "on Tape Device"
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "on CDROM"
+msgid ""
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
+"\n"
msgstr ""
+"Geluk, die netwerk en internetkonfigurasie is voltooi.\n"
+"\n"
+"Die kongiurasie gaan op u stelsel toegepas word.\n"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "across Network"
+msgid "\t-Hard drive.\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
-msgid "on Hard Drive"
+msgid ""
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
+"\n"
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please choose where you want to backup"
-msgstr "Kies die pakkette wat u wil installeer"
+#
+#: ../../printer/main.pm:1
+#, c-format
+msgid "Printer on remote CUPS server"
+msgstr "Eksterne CUPS-drukker"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "More Options"
-msgstr "Module opsies:"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgstr ""
-#
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "When"
-msgstr "Wiel"
+msgid "delete"
+msgstr "Uitwis"
-#
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Where"
-msgstr "Wiel"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "here if no."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "What"
-msgstr "Wag"
+msgid "DHCP host name"
+msgstr "Rekenaarnaam"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
+msgid "The maximum lease (in seconds)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "Send mail report after each backup to:"
-msgstr ""
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "Aan watter seriaalpoort is u muis gekoppel?"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
-"\n"
-"Note that currently all 'net' medias also use the hard drive."
+msgid "Did it work properly?"
+msgstr "Het dit reg gewerk?"
+
+#: ../../security/level.pm:1
+#, c-format
+msgid "Poor"
+msgstr "Swak"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The DHCP start range"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Kies asb. 'n taal om te gebruik."
+#: ../../lang.pm:1
+#, c-format
+msgid "Grenada"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Kies die pakkette wat u wil installeer"
+#: ../../any.pm:1
+#, c-format
+msgid "Unsafe"
+msgstr "Onveilig"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use daemon"
-msgstr "Gebruikerskode"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid ", %s sectors"
+msgstr ", %s sektore"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "monthly"
-msgstr ""
+msgid "No"
+msgstr "Nee"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "weekly"
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "daily"
+msgid "Guadeloupe"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "hourly"
+msgid "could not find any font.\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "HardDrive / NFS"
+msgid "Do you want the BackSpace to return Delete in console?"
msgstr ""
+"Wil u hê dat die 'BackSpace' sleutel moet uitvee in die konsole ('n 'Delete' "
+"terugstuur)?"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "CDROM / DVDROM"
-msgstr ""
+msgid "Vertical refresh rate"
+msgstr "Vertikale verfristempo"
-#
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter the directory to save to:"
-msgstr "Toets asb. die muis"
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#, c-format
+msgid "Entering step `%s'\n"
+msgstr "Gaan stap '%s' binne\n"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr "Kies die pakkette wat u wil installeer"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr "Kies die pakkette wat u wil installeer"
+msgid "Removing %s ..."
+msgstr "LPD word verwyder..."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "Kies die pakkette wat u wil installeer"
+msgid "Niger"
+msgstr "Hoog"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Please enter the device name to use for backup"
-msgstr ""
+msgid "No printer"
+msgstr "Geen drukker"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Use tape to backup"
-msgstr "Korrupte rugsteunlêer"
+msgid "alert configuration"
+msgstr "Kleurkonfigurasie"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "No CD device defined!"
-msgstr "Selekteer lOer"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "NetWare Printer Options"
+msgstr "NetWare drukkeropsies"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
+msgid "%s BootSplash (%s) preview"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "Kliek asb. op 'n partisie"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "Kliek asb. op 'n partisie"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid " Erase Now "
-msgstr "Oordrag"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "Kliek asb. op 'n partisie"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "General"
+msgstr "Algemeen"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "Kliek asb. op 'n partisie"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing system: "
+msgstr "Drukkerstelsel:"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check for multisession CD"
-msgstr "Kliek asb. op 'n partisie"
+#: ../../steps.pm:1
+#, c-format
+msgid "Add a user"
+msgstr "Voeg 'n gebruiker by"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "Wat is u sleutelborduitleg?"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Network configuration (%d adapters)"
+msgstr "Netwerkkonfigurasie (%d toestelle)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
+msgid "Mandatory package %s is missing"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use CD/DVDROM to backup"
+msgid "Philippines"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
#, c-format
-msgid "Need hostname, username and password!"
-msgstr ""
+msgid "Ok"
+msgstr "OK"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Remember this password"
-msgstr "Geen wagwoord"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Print Queue Name"
+msgstr "Drukkertounaam"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter your password"
-msgstr "Probeer asb. weer"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "Wil u aboot gebruik?"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter your login"
-msgstr "Probeer asb. weer"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "Belarussies"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
msgstr ""
-#
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Please enter the host name or IP."
-msgstr "Toets asb. die muis"
+msgid "Move files to the new partition"
+msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
msgstr ""
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid ""
-" Transfer \n"
-"Now"
-msgstr "Oordrag"
+msgid "Restore From Catalog"
+msgstr "Reddingspartisietabel"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Pitcairn"
+msgstr "Druk"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
-msgstr ""
+msgid "IDE"
+msgstr "IDE"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "group :"
+msgstr "Werkgroep:"
+
+#: ../../fs.pm:1
#, c-format
-msgid "Use Expect for SSH"
+msgid "mounting partition %s in directory %s failed"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Net Method:"
+msgid "Lilo screen"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use network connection to backup"
-msgstr "Korrupte rugsteunlêer"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Users"
-msgstr "Gebruikerskode"
+#: ../../bootloader.pm:1 ../../help.pm:1
+#, c-format
+msgid "LILO with graphical menu"
+msgstr "LILO met grafiese kieskaart"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Windows (FAT32)"
-msgstr "Verwyder Windows(TM)"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Estimating"
+msgstr "Skatting"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr ""
+msgid "You can't unselect this package. It is already installed"
+msgstr "U kan nie heirdie pakket verwyder nie. Dis alreeds geïnstalleer"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Remove Selected"
-msgstr "Verwyder tou"
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "Eksterne SMB/Windows 95/98/NT-drukker"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do not include the browser cache"
-msgstr ""
+msgid "Go on anyway?"
+msgstr "Gaan steeds voort?"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "Kies die pakkette wat u wil installeer"
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "Soek vir beskikbare pakkette"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
+msgid "Does not appear to be recordable media!"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
+msgid "Specify options"
+msgstr "Spesifieer opsies"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use incremental backup (do not replace old backups)"
+msgid "Vanuatu"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Korrupte rugsteunlêer"
-
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
+msgid "Either the server name or the server's IP must be given!"
+msgstr "Óf die bedienernaam óf die bediener-IP moet verskaf word!"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
"\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
msgstr ""
+"'n Spesiale herlaaiskyf voorsien ;n metode waarby u Linux kan laai sonder\n"
+"die gebruik van 'n normale herlaaistelsel. Dit is veral bruikbaar wanneer\n"
+"u nie SILO op u stelsel wil installeer nie, 'n ander bedryfstelsel SILO\n"
+"verwyder of SILO nie met u stelsel werk nie. Hierdie herlaaiskyf kan ook\n"
+"met die Mandrake reddingsbeeld gebruik word, wat dit makliker maak om van\n"
+"ernstige stelselfalings te herstel.\n"
+"\n"
+"Indien u 'n herlaaiskyf wil maak,\n"
+"plaas 'n skyf in die aandrywer en druk \"OK\"."
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
+msgid "You can't use an encrypted file system for mount point %s"
+msgstr "U kan nie LVM logiese volume vir hegpunt %s gebruik nie."
+
+#: ../../lang.pm:1
#, c-format
-msgid "Select the files or directories and click on 'Add'"
+msgid "Norfolk Island"
msgstr ""
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../standalone/drakboot:1
#, fuzzy, c-format
-msgid "File Selection"
-msgstr "Pakketkeuse"
+msgid "Theme installation failed!"
+msgstr "Kies installasieklas"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Can't create catalog!"
+msgid "Nothing to do"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid " Error while sending mail. \n"
-msgstr "Fout met die les van lêer %s"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Use for loopback"
+msgstr "Gebruik vir teruglus"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
+msgid "use pppoe"
+msgstr "gebruik pppoe"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Moving files to the new partition"
+msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
+
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s met EKSPERIMENTELE 3D-hardewareversnelling"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1
#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
+msgid "Advanced"
+msgstr "Gevorderd"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"file list sent by FTP: %s\n"
-" "
-msgstr ""
+msgid "Transfer"
+msgstr "Oordrag"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "No changes to backup!"
-msgstr "Korrupte rugsteunlêer"
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak (VSA)"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Korrupte rugsteunlêer"
+msgid "More Options"
+msgstr "Module opsies:"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Backup Other files..."
-msgstr "Korrupte rugsteunlêer"
+msgid "Afghanistan"
+msgstr "Albanies"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hard Disk Backup Progress..."
+msgid "Delete Hard Drive tar files after backup to other media."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup User files..."
-msgstr "Korrupte rugsteunlêer"
-
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Backup system files..."
+msgid ""
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
msgstr ""
+"cron is die standaard UNIX program om gebruikergespesifiseerde programme\n"
+"op periodies geskeduleerde tye te loop. vixie cron voeg addisionele "
+"funksionaliteit\n"
+"by die standaard UNIX cron, insluitende beter sekuriteit en 'n kragtiger "
+"konfigurasie."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "No tape in %s!"
+msgid "Burundi"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Permission problem accessing CD."
+msgid "Add Client -->"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "This may take a moment to erase the media."
-msgstr ""
+msgid "Read carefully!"
+msgstr "Lees noukeurig!"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Not erasable media!"
+msgid "RW"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Does not appear to be recordable media!"
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "No CDR/DVDR in drive!"
-msgstr ""
+msgid "Port"
+msgstr "Poort"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "WebDAV transfer failed!"
+msgid "No (experts only)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "WebDAV remote site already in sync!"
+msgid "No kernel selected!"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Total progess"
-msgstr "Toetsbladsye"
-
-#: ../../standalone/drakbackup:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
-"\n"
-"without being prompted for a password."
-msgstr ""
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Druk ENTER om die gekose bedryfstelsel te laai, 'e' om te redigeer."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "%s not responding"
+msgid "Set-GID"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Can't find %s on %s"
-msgstr "Kan nie %s oopmaak nie: %s\n"
+msgid "The encryption keys do not match"
+msgstr "Die wagwoorde stem nie ooreen nie."
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Permission denied transferring %s to %s"
+msgid "Right \"Windows\" key"
msgstr ""
#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Bad password on %s"
-msgstr "Geen wagwoord"
-
-#: ../../standalone/drakbackup:1
#, c-format
-msgid "No password prompt on %s at port %s"
+msgid "CDROM / DVDROM"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "ERROR: Cannot spawn %s."
+msgid "if set to yes, check empty password in /etc/shadow."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "This may take a moment to generate the keys."
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
msgstr ""
+"Voordat u voortgaan, lees asb die lisensieterme noukeurig deur. Dit dek\n"
+"die hele Mandrake Lnux distirbusie, and indien u nie saamstem met al die\n"
+"terme daarin bevat nie, kliek om die Weier knoppie. Dit sal onmiddelik die\n"
+"installasie stop sit. Om met die installasie voort te gaan kliek op die "
+"Aanvaar\n"
+"knoppie."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"%s exists, delete?\n"
+"Here is a list of the available printing options for the current printer:\n"
"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
+msgid "Resolutions"
+msgstr "Resolusies"
-#: ../../standalone/drakbackup:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
+"drakfirewall configurator\n"
"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
+"Please enter your username, password and domain name to access this host."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Remove selected host"
+msgstr "Verwyder tou"
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "INFO"
+msgid "Network configuration"
+msgstr "Netwerkkonfigurasie"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "No sharing"
+msgstr "CUPS word gelaai"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule down one level"
msgstr ""
+#: ../../common.pm:1
+#, c-format
+msgid "TB"
+msgstr "TB"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you are using a DVDR device"
+msgstr "Kliek asb. op 'n partisie"
+
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "FATAL"
msgstr "FAT"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "WARNING"
+msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
+"\n"
+"The network address is %s using a netmask of %s.\n"
+"\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cron not available yet as non-root"
-msgstr ""
+msgid "Delete"
+msgstr "Uitwis"
-#: ../../standalone/drakboot:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "%s installasie het gefaal a.g.v. hierdie fout: "
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid reboot by the console user."
+msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "No, I don't want autologin"
-msgstr "Nee, ek verlang outo-aanteken"
+msgid ""
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
+msgstr ""
+"Ek kan u rekenaar so opstel om X outomaties te laai.\n"
+"Wil u X begin met 'n herlaai?"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ja, ek verlang outoaanteken met hierdie (gebruiker,werkskerm)"
+msgid "Build the disk"
+msgstr "Bou die skyf"
-#: ../../standalone/drakboot:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnect %s"
+msgstr "Diskonnekteer"
+
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "Laai X-Windowstelsel met herlaai"
+msgid "Status:"
+msgstr "Status:"
-#: ../../standalone/drakboot:1
+#: ../../network/network.pm:1
#, c-format
-msgid "System mode"
-msgstr "Stelselmode"
+msgid "HTTP proxy"
+msgstr "HTTP instaanbediener"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "SSH Server"
+msgstr "NIS-bediener"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bootsplash"
+msgid "\t-Network by rsync.\n"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "European protocol"
+msgstr "Europese protokol"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lilo screen"
+msgid ", printer \"%s\" on server \"%s\""
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
#, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
+msgid "Error"
+msgstr "Fout"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Themes"
+msgid "allow \"su\""
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, fuzzy, c-format
-msgid "Splash selection"
-msgstr "Stoor pakketseleksie"
+msgid "Australia"
+msgstr "seriaal"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
+msgid "please wait during ttmkfdir..."
msgstr ""
-"U gebruik huidig %s as herlaaibestuurder.\n"
-"Kliek op Konfigureer om opstelassistent te laai."
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr ""
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid "Configure only card \"%s\"%s"
+msgstr "Konfigureer net die \"%s\" kaart (%s)"
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Theme installation failed!"
-msgstr "Kies installasieklas"
+msgid "Level"
+msgstr "vlak"
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Notice"
-msgstr "Geen video"
+msgid "Change the printing system"
+msgstr "Stel netwerk op"
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid ""
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
+msgstr ""
+"U stelsel onderstuen multikopkonfigurasie.\n"
+"Wat wil u doen?"
+
+#: ../../steps.pm:1
#, c-format
-msgid "Relaunch 'lilo'"
+msgid "Configure services"
+msgstr "Konfigureer dienste"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Broadcast Address:"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
+#, c-format
+msgid "mount failed: "
+msgstr "heg het gefaal"
+
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
-msgstr ""
+msgid "Image"
+msgstr "Beeld"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Remote Administration"
+msgstr "Eksterne lpd drukkeropsies"
+
+#: ../../modules.pm:1
#, c-format
msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Write %s"
-msgstr "XFree %s"
+msgid "Selected All"
+msgstr "Selekteer lOer"
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr ""
+msgid "CUPS - Common Unix Printing System"
+msgstr "CUPS - Generiese Unixdrukstelsel (Common Unix Printing System) "
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Webmin Service"
+msgstr "Dienste"
+
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Lilo message not found"
-msgstr ""
+msgid "device"
+msgstr "toestel"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Copy %s to %s"
-msgstr ""
+msgid "All"
+msgstr "Alles"
-#: ../../standalone/drakboot:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Backup %s to %s.old"
-msgstr ""
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "Watter drukkerstelsel (spoelprogram) verlang u?"
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, fuzzy, c-format
-msgid "Create new theme"
-msgstr "Kies 'n nuwe grootte"
+msgid "Greece"
+msgstr "Grieks"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "An error occurred"
+msgstr "'n Fout het voorgekom"
+
+#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
-"Display theme\n"
-"under console"
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
msgstr ""
+"Hierdie pakket moet opgradeer word\n"
+"Is u seker u wil dit deselekteer?"
-#: ../../standalone/drakboot:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Install themes"
-msgstr "Installeer stelsel"
+msgid "Tamil (Typewriter-layout)"
+msgstr "Armenies (tikmasjien)"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Lilo/grub mode"
-msgstr "LILO/GRUB metode"
+msgid "manual"
+msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Yaboot mode"
-msgstr "Yaboot metode"
+msgid "Printer manufacturer, model, driver"
+msgstr "Drukkervervaardiger, model, drywer"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
+#: ../../standalone/drakfloppy:1
+#, fuzzy, c-format
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"Daar is geen medium for toestel %s nie.\n"
+"Sit asb. een in."
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "/File/_Quit"
-msgstr "/Lêer/_Verlaat"
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
+msgstr ""
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "/_File"
-msgstr "/_Lêer"
+msgid "Printer on NetWare server"
+msgstr "Eksterne Netware-drukker"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Boot Style Configuration"
-msgstr "Herlaaistylkonfigurasie"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "No browser available! Please install one"
-msgstr "U kan ander tale selekteer wat na installasie beskikbaar sal wees."
+msgid "Give the ram size in MB"
+msgstr "Gee die geheuegrootte in MB"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "connecting to Bugzilla wizard ..."
-msgstr ""
+msgid "Real name"
+msgstr "Regte naam"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Package not installed"
-msgstr "Verlaay installasie"
+msgid "done"
+msgstr "Klaar"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Not installed"
-msgstr "Verlaay installasie"
+msgid "Please uncheck or remove it on next time."
+msgstr "Op watter seriaalpoort is u modem gekoppel?"
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Standalone Tools"
-msgstr "Konsole hulpprogramme"
+msgid "Higher"
+msgstr "Hoog"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Report"
-msgstr "Poort"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the partitions you want to format"
+msgstr "Kies die partisies om te formatteer"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Release: "
-msgstr "Wag asb."
+msgid "Can't find %s on %s"
+msgstr "Kan nie %s oopmaak nie: %s\n"
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Kernel:"
-msgstr ""
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Package: "
-msgstr "Pakketkeuse"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Application:"
-msgstr "Magtiging"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Configuration Wizards"
-msgstr "Netwerkkonfigurasie-assistent"
+msgid "Japanese 106 keys"
+msgstr "Japanees 106 sleutels"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Userdrake"
-msgstr "Drukker"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "This will take a few minutes."
+msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Windows Migration tool"
+msgid "Burkina Faso"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Urpmi"
+msgid "Use scanners on remote computers"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Software Manager"
-msgstr "Drukkernaam:"
+msgid "Delete selected rule"
+msgstr "Verwyder tou"
#
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Remote Control"
-msgstr "Eksterne drukker"
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Eksterne CUPS-drukker"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Msec"
-msgstr "Muis"
+msgid "Insert a floppy in %s"
+msgstr "Sit 'n skyf in aandrywer %s"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Menudrake"
-msgstr "verpligtend"
+#: ../../lang.pm:1
+#, c-format
+msgid "Maldives"
+msgstr ""
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Mandrake Online"
-msgstr "Beheersentrum"
+#: ../../any.pm:1
+#, c-format
+msgid "compact"
+msgstr "kompak"
-#: ../../standalone/drakbug:1
+#: ../../common.pm:1
#, c-format
-msgid "HardDrake"
-msgstr ""
+msgid "1 minute"
+msgstr "1 minuut"
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "on channel %d id %d\n"
+msgstr "op bus %d id %d\n"
+
+#: ../../printer/main.pm:1
#, c-format
-msgid "Synchronization tool"
+msgid ", multi-function device"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "First Time Wizard"
+msgid "Laos"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../install_interactive.pm:1
#, fuzzy, c-format
-msgid "Mandrake Control Center"
-msgstr "Beheersentrum"
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr ""
+"Daar is geen FAT partisies om te verander of om as teruglus (nie genoeg "
+"spasie nie) te gebruik nie"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Mandrake Bug Report Tool"
+msgid "Up"
msgstr ""
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Parameters"
-msgstr "Parameters"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Firewall"
+msgstr "Vuurmuur/Netwerkroteerder"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Internet Connection Configuration"
-msgstr "Internetkonneksiekonfigurasie"
+msgid "Area:"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "DHCP Client"
-msgstr "DHCP-Kliënt"
+msgid "(E)IDE/ATA controllers"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ethernet Card"
-msgstr "Ethernetkaart"
+msgid "Printer Server"
+msgstr "Drukkerbediener"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Gateway"
-msgstr "Portaal"
+msgid "Disconnection from the Internet complete."
+msgstr ""
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
-#, c-format
-msgid "Connection type: "
-msgstr "Konneksietipe:"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Custom configuration"
+msgstr "Kleurkonfigurasie"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Profile: "
-msgstr "Profiel:"
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet connection configuration"
-msgstr "Internetkonneksiekonfigurasie"
+msgid "Saint Pierre and Miquelon"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
+msgid "saving Bootsplash theme..."
msgstr ""
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "activate now"
-msgstr "Aktiveer nou dadelik"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Portugal"
+msgstr "Poort"
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "deactivate now"
-msgstr "deaktiveer nou dadelik"
+msgid "Do you have another one?"
+msgstr "Beskik u oor nog?"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "DHCP client"
-msgstr "DHCP-kliënt"
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid ", printing to %s"
+msgstr "Fout in die skryf van %s"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Started on boot"
-msgstr "Gelaai tydens herlaaityd"
+#
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Assign host name from DHCP address"
+msgstr "Toets asb. die muis"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Protocol"
-msgstr "Herlaaiprotokol"
+msgid "Toggle to normal mode"
+msgstr "Skakel oor na normale gebruiksvlak"
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Adapter %s: %s"
-msgstr "Toestel %s: %s"
+msgid "Generic"
+msgstr "Generies"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Cylinder %d to %d\n"
+msgstr "Silinder %d na silinder %d\n"
#: ../../standalone/drakconnect:1
#, c-format
-msgid "LAN Configuration"
-msgstr "LAN konfigurasie"
+msgid "New profile..."
+msgstr "Nuwe profiel..."
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LAN configuration"
-msgstr "LAN-konfigurasie"
+msgid "Which disk do you want to move it to?"
+msgstr "Na watter skyf wil u skuif?"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
+msgid "Display logo on Console"
msgstr ""
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Connect..."
-msgstr "Konnekteer..."
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Windows Domain"
+msgstr "NIS-domein"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Disconnect..."
-msgstr "Diskonnekteer..."
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Interface %s (on network %s)"
+msgstr "Koppelvlak %s (met module %s)"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Not connected"
-msgstr "Nie gekonnekteer nieKabelkonneksie"
+msgid "INFO"
+msgstr ""
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connected"
-msgstr "Gekonnekteer"
+msgid "Wallis and Futuna"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
+msgid "Need to create /etc/dhcpd.conf first!"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Interface:"
-msgstr "Koppelvlak:"
+msgid "Is FPU present"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Gateway:"
-msgstr "Portaal:"
+msgid "There are no scanners found which are available on your system.\n"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../services.pm:1
#, c-format
-msgid "Apply"
-msgstr "Pas toe"
+msgid ""
+"No additional information\n"
+"about this service, sorry."
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Click here to launch the wizard ->"
+msgid "Build Single NIC -->"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Wizard..."
-msgstr "Assistent..."
+msgid "Is this correct?"
+msgstr "Is dit korrek?"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Status:"
-msgstr "Status:"
+msgid "Marshall Islands"
+msgstr ""
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Type:"
-msgstr "Tipe:"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Windows (FAT32)"
+msgstr "Verwyder Windows(TM)"
-#: ../../standalone/drakconnect:1
+#: ../../steps.pm:1
#, c-format
-msgid "Internet access"
-msgstr "Internettoegang"
+msgid "Root password"
+msgstr "Kies 'root' se wagwoord"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Hostname: "
-msgstr "Bedienernaam:"
+msgid "Build All Kernels -->"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Stel plaaslike netwerk op..."
+msgid "if set to yes, report unowned files."
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "State"
-msgstr "Toestand"
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"U het nie 'n ruilpartisie nie\n"
+"\n"
+"Wil u steeds voortgaan?"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Driver"
-msgstr "Drywer"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Server IP missing!"
+msgstr "NCP-bedienernaam ontbreek!"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Protocol"
-msgstr "Protokol"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Suriname"
+msgstr "Drukkernaam:"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Interface"
-msgstr "Koppelvlak"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Enable ACPI"
+msgstr "Laat CD-herlaai toe?"
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "Configure Internet Access..."
-msgstr "Konfigureer internettoegang..."
+msgid "Graphical Environment"
+msgstr "Grafiese omgewing"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Wait please"
+msgid "Gibraltar"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
+msgid "on Tape Device"
msgstr ""
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "New profile..."
-msgstr "Nuwe profiel..."
+#: ../../network/modem.pm:1
+#, fuzzy, c-format
+msgid "Do nothing"
+msgstr "CUPS word gelaai"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Profile to delete:"
-msgstr "Profiel om uit te vee..."
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Delete Client"
+msgstr "DHCP-Kliënt"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Del profile..."
-msgstr "Vee profiel uit..."
+msgid "Filesystem type: "
+msgstr "LOerstelseltipe: "
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Netwerkkonfigurasie (%d toestelle)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Starting network..."
+msgstr "Konneksie word begin..."
-#: ../../standalone/drakedm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
+msgid "Vietnam"
msgstr ""
-#: ../../standalone/drakedm:1
-#, c-format
-msgid "Choosing a display manager"
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/_Fields description"
+msgstr "Beskrywing"
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
+msgid "Optimize your security by using Mandrake Linux"
msgstr ""
-"Kon nie mkbootdisk ordentelik afsluit nie:\n"
-" %s \n"
-" %s"
-#: ../../standalone/drakfloppy:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Unable to fork: %s"
-msgstr "Kon nie vurk nie: %s"
-
-#: ../../standalone/drakfloppy:1
-#, fuzzy, c-format
-msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+msgid "Help"
msgstr ""
-"Daar is geen medium for toestel %s nie.\n"
-"Sit asb. een in."
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "versker asb dat die regte mediatipe vir toestel %s beskikbaar is"
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Build the disk"
-msgstr "Bou die skyf"
-#: ../../standalone/drakfloppy:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Output"
-msgstr "Uitset"
+msgid "Your personal phone number"
+msgstr "U persoonlike telefoonnommer"
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Remove a module"
-msgstr "Verwyder module"
+msgid "Which size do you want to keep for Windows on"
+msgstr "Watter grootte wil u vir Windows behou?"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Add a module"
-msgstr "Voeg module by"
+msgid ""
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+msgstr ""
+"Toetsbladsy(e) is na die drukker gestuur.\n"
+"Dit mag 'n tydjie neem voordat drukwerk begin.\n"
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "omit scsi modules"
-msgstr "laat SCSI-modules weg"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Username required"
+msgstr "Gebruikerskode"
-#: ../../standalone/drakfloppy:1
+#: ../../help.pm:1
#, c-format
-msgid "if needed"
-msgstr "indien nodig"
+msgid ""
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "omit raid modules"
-msgstr "laat RAID-modules weg"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "SMB (Windows 9x/NT) drukkeropsies"
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
-msgid "force"
-msgstr "forseer"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
#: ../../standalone/drakfloppy:1
#, c-format
msgid "mkinitrd optional arguments"
msgstr "mkinitrd opsionele parameters"
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Expert Area"
-msgstr "Kundige area"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#
+#: ../../network/isdn.pm:1
#, c-format
-msgid "kernel version"
-msgstr "bedryfstelselkernweergawe"
+msgid "Protocol for the rest of the world"
+msgstr "Protokol vir die res van die wêreld"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "default"
-msgstr "verstek"
+msgid "Print test pages"
+msgstr "Druk toetsbladsy(e)"
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "General"
-msgstr "Algemeen"
+msgid "64 MB or more"
+msgstr "64MB of meer"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "boot disk creation"
-msgstr "herlaaiskyfskepping"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "Please select the device where your %s is attached"
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Size"
-msgstr "Grootte"
+msgid "Not formatted\n"
+msgstr "Nie geformatter\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Module name"
-msgstr "Modulenaam"
-
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Post Uninstall"
-msgstr "Verlaay installasie"
+msgid "Periodic Checks"
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "Remove fonts on your system"
-msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
+msgid "PXE Server Configuration"
+msgstr "Sluit konfigurasie af"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Initial tests"
-msgstr "Beginboodskap"
+msgid "Backup the system files before:"
+msgstr "Korrupte rugsteunlêer"
-#: ../../standalone/drakfont:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Post Install"
-msgstr "Installasie"
-
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "Install & convert Fonts"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
msgstr ""
+"Hierdie is die standaard sekuriteitsvlak wat aanbeveel word vir rekenaars\n"
+"wat aan die internet as 'n kliënt konnekteer. Daar is heelwat "
+"sekuriteitstoetse."
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Copy fonts on your system"
-msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
+#: ../../any.pm:1
+#, c-format
+msgid "First floppy drive"
+msgstr "Eerste sagteskyfaandrywer"
-#
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Remove List"
-msgstr "Verwyder drukker"
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "/File/_Quit"
+msgstr "/Lêer/_Verlaat"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Selected All"
-msgstr "Selekteer lOer"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak"
+msgstr "Dvorak"
-#: ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Unselected All"
-msgstr ""
+msgid "Choose the new size"
+msgstr "Kies die nuwe grootte"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "here if no."
+msgid "Media class"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "click here if you are sure."
+msgid "The %s is not known by this version of Scannerdrake."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Install List"
-msgstr "Installeer stelsel"
+msgid "Faroe Islands"
+msgstr "Yslandies"
#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Restart XFS"
+msgstr "Laai dit"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
+msgid "Add host/network"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
msgstr ""
-#: ../../standalone/drakfont:1
+#
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Generic Printers"
-msgstr "Drukker"
+msgid "Please enter the directory to save to:"
+msgstr "Toets asb. die muis"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Abiword"
-msgstr "Aborteer"
+msgid "Model name"
+msgstr "Modulenaam"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "StarOffice"
-msgstr "Kantoor"
+msgid "Albania"
+msgstr "Albanies"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Ghostscript"
+msgid "No CDR/DVDR in drive!"
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Kies die partisies om te formatteer"
+#: ../../lang.pm:1
+#, c-format
+msgid "British Indian Ocean Territory"
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "Normal Mode"
+msgstr "Normale modus"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
+"Please be sure that the cron daemon is included in your services. \n"
"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
+"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "About"
-msgstr "Aborteer"
-
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Font List"
-msgstr "Hegpunt"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer connection type"
+msgstr "Drukkerkonneksietipe"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Advanced Options"
-msgstr "Sluit konfigurasie af"
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#, c-format
+msgid "No network adapter on your system!"
+msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Uninstall Fonts"
-msgstr "Deïnstallasie van RPMs"
+msgid "Network %s"
+msgstr "Netwerkkoppelvlak"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Get Windows Fonts"
+msgid "Malayalam"
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Import Fonts"
-msgstr "Formateer partisies"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s out of range!"
+msgstr "Opsie %s is buite bereik!"
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "done"
-msgstr "Klaar"
+msgid "Connect %s"
+msgstr "Konnekteer"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "xfs restart"
-msgstr "beperk"
-
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "Suppress Fonts Files"
-msgstr ""
+msgid "Restarting CUPS..."
+msgstr "Laai dit"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Restart XFS"
-msgstr "Laai dit"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "Netwerk op pad af"
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Suppress Temporary Files"
-msgstr ""
+msgid "Duplicate mount point %s"
+msgstr "Duplikaat hegpunt %s"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "type1inst building"
+msgid "if set to yes, run chkrootkit checks."
msgstr ""
-#: ../../standalone/drakfont:1
+#
+#: ../../network/tools.pm:1
#, c-format
-msgid "pfm fonts conversion"
-msgstr ""
+msgid "Connection Configuration"
+msgstr "Konneksiekonfigurasie"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "Unknown|Generic"
+msgstr "Generies"
+
+#: ../../help.pm:1
#, c-format
-msgid "ttf fonts conversion"
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Ghostscript referencing"
-msgstr ""
+msgid "Quit"
+msgstr "Verlaat"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Fonts conversion"
+msgid "Myanmar"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "True Type install done"
-msgstr ""
+msgid "Auto allocate"
+msgstr "Outo-allokeer"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr ""
+msgid "Check bad blocks?"
+msgstr "Toets vir foutiewe areas?"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "True Type fonts installation"
-msgstr "Berei installasie voor"
+msgid "Other MultiMedia devices"
+msgstr "Ander"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Fonts copy"
-msgstr "Formatteer floppie"
+msgid "No remote machines"
+msgstr "(op hierdie rekenaar)"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Search for fonts in installed list"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "could not find any font.\n"
-msgstr ""
+msgid "Authentication NIS"
+msgstr "NIS-magtiging"
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Reselect correct fonts"
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
+"Opsie ``Beperk instruksielynopsies'' kan nie sonder wagwoord gebruikword nie"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr ""
+msgid "Internet Connection Sharing currently enabled"
+msgstr "Internetkonneksiedeling is ontsper"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "no fonts found"
-msgstr "%s is nie gevind nie"
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Card IO_0"
+msgstr "Kaart IO_0"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "parse all fonts"
+msgid "United Arab Emirates"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Unselect fonts installed"
+msgid "Card IO_1"
+msgstr "Kaart IO_1"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Thailand"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Search installed fonts"
+msgid "Routers:"
msgstr ""
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Internetkonneksiedeling"
+#: ../../lang.pm:1
+#, c-format
+msgid "Kazakhstan"
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "Internetkonneksiedelingkonfigurasie"
+msgid "Display all available remote CUPS printers"
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../install_steps_newt.pm:1
#, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Geen internetkonneksiedeling is al gekonfigureer nie."
+msgid "Mandrake Linux Installation %s"
+msgstr "Mandrake Linux Installasie %s"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Die opstelling is alreeds gedoen en is alreeds ook geaktiveer."
+msgid "Thai keyboard"
+msgstr "Thai sleutelbord"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Die opstelling van is alreeds gedoen, maar is tans gedeaktiveer."
+msgid "Dialup options"
+msgstr "Opbelopsies"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
+msgid "Bouvet Island"
msgstr ""
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Problems installing package %s"
-msgstr "Probleme met Installasue van pakket %s"
+msgid "If no port is given, 631 will be taken as default."
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
+msgid ""
+"Change your Cd-Rom!\n"
+"\n"
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
-"Skrips word konfigureer, sagterware installeer en bedieners afgeskop..."
+"Verander u CDROM!\n"
+"\n"
+"Sit asb. die CDROM getiteld \"%s\" in die aandrywer en druk OK. Indien u "
+"nie\n"
+"hieroor beskik nie, druk Kanselleer om installasies vanaf dié CDROM te vermy."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configuring..."
-msgstr "Konfigurasie in aabou..."
+msgid "Polish"
+msgstr "Pools"
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Moontlike LAN-adresbotsing gevind in konfigurasie %s!\n"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Mandrake Online"
+msgstr "Beheersentrum"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
+msgid "\t-Network by webdav.\n"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Re-configure interface and DHCP server"
+msgid ""
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
msgstr ""
+"Geen ethernetkaart is op die stelsel gevind nie. Gebruik asb. die "
+"hardewarekonfigurasieprogram."
+#
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakgw:1
#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr ""
+msgid "Netmask"
+msgstr "Netmasker"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid "No hard drives found"
+msgstr "Plaaslike drukker"
+
+#: ../../mouse.pm:1
#, c-format
-msgid "The default lease (in seconds)"
-msgstr ""
+msgid "Logitech CC Series"
+msgstr "Logitech CC Reeks (seriaal)"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "The DHCP end range"
-msgstr ""
+msgid "2 buttons"
+msgstr "2 knoppies"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The DHCP start range"
-msgstr ""
+msgid "What kind is your ISDN connection?"
+msgstr "Watter tipe is u ISDN-konneksie?"
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
+#, c-format
+msgid "Label"
+msgstr "Etiket"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Save on floppy"
+msgstr "Stoor op floppie"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "The internal domain name"
-msgstr "Nuwe drukkernaam"
+msgid "Printer auto-detection"
+msgstr "Gebruik outobespeuring"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, fuzzy, c-format
-msgid "The DNS Server IP"
-msgstr "CUPS-bediener IP:"
+msgid "Which of the following is your ISDN card?"
+msgstr "Wat is u ISDN-kaart?"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
+msgstr ""
+"NFS is 'n populêre protokol vir lêerdeling oor TCP/IP netwerke.\n"
+"Hierdie diens voorsien NFS-bedienerfunksionaliteit. Dit word via\n"
+"die /etc/exports lêer opgestel."
+
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "(This) DHCP Server IP"
-msgstr "CUPS-bediener IP:"
+msgid "Msec"
+msgstr "Muis"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"DHCP Server Configuration.\n"
-"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
-"\n"
+"=> Notice, a label changed:\n"
+"%s"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
+#, c-format
+msgid "Number of capture buffers:"
+msgstr ""
+
+#: ../../interactive/stdio.pm:1
#, fuzzy, c-format
-msgid "Local Network adress"
-msgstr "geen netwerkkaart gevind nie"
+msgid "Your choice? (0/1, default `%s') "
+msgstr "U keuse? (verstek %s) "
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
+"\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
+"\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
"\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
+"\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
msgstr ""
+#: ../../keyboard.pm:1
+#, c-format
+msgid "French"
+msgstr "Frans"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTY)"
+msgstr "Tseggies (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
+#, fuzzy, c-format
+msgid "Hardware probing in progress"
+msgstr "Op poort %s bespeur"
+
#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Net Device"
+msgstr "Drukkerbediener"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Summary"
+msgstr "Opsomming"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Current interface configuration"
-msgstr "Verander drukkerkonfigurasie"
+msgid "Next"
+msgstr "Teks"
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
#, fuzzy, c-format
-msgid "Show current interface configuration"
-msgstr "Verander drukkerkonfigurasie"
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "Waar wil u die herlaaistelsel installeer"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "No (experts only)"
-msgstr ""
+msgid "CHAP"
+msgstr "CHAP"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "Automatic reconfiguration"
-msgstr "Outomatiese CUPS konfigurasie"
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp)"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
"\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
"\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Network interface already configured"
-msgstr "Monitor is nie opgestel nie"
+msgid "Puerto Rico"
+msgstr "Protokol"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""
-"Kies asb. die netwerkkaart wat aan die loakel area netwerk gekoppel is."
-#
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "Lituanies \"nommerry\" QWERTY"
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
-"%s\n"
"\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
msgstr ""
-"Daar is net een konfigureerde netwerkkaart op u stelsel.\n"
-"\n"
-"%s\n"
-"\n"
-"Ek gaan nou u LAN met daardie kaart opstel."
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface"
-msgstr "Netwerkkoppelvlak"
+msgid "Anguilla"
+msgstr ""
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "NIS Domain"
+msgstr "NIS-domein"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
+"\n"
+"- User Files:\n"
msgstr ""
-"Geen ethernetkaart is op die stelsel gevind nie. Gebruik asb. die "
-"hardewarekonfigurasieprogram."
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "No network adapter on your system!"
-msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
+msgid "Antarctica"
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Interface %s"
-msgstr "Koppelvlak %s"
+msgid "Mount options"
+msgstr "Hegopsies:"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Koppelvlak %s (met module %s)"
-
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Net Device"
-msgstr "Drukkerbediener"
+msgid "Jamaica"
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
+#: ../../security/help.pm:1
+#, c-format
msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
msgstr ""
-"Nou dat u internetkonfigurasie opgestel is,\n"
-"moet u die rekenaar opstel om dit te deel.\n"
-"LW: U benodig 'n ware netwerkkaart om 'n lokalearea netwerk (LAN) op te "
-"stel.\n"
-"\n"
-"Wil u internetdeling opstel?\n"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Internetkonneksiedeling"
+msgid "Please wait, preparing installation..."
+msgstr "Wag asb. installasie word voorberei"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Internetkonneksiedeling is geaktiveer"
+msgid "Czech (QWERTZ)"
+msgstr "Tseggies (QWERTZ)"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Enabling servers..."
-msgstr "Bedieneers word aktiveer..."
+msgid "Track network card id (useful for laptops)"
+msgstr "Volg netwerkkart ID. (nuttig vir skootrekenaars)"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "dismiss"
-msgstr "ignoreer/sien oor"
+msgid "The port number should be an integer!"
+msgstr "Die poortnommer moet heeltal wees."
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "reconfigure"
-msgstr "herkonfigureer"
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "You must choose an image file first!"
+msgstr "Tik drukkertoestel URI in"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore from Hard Disk."
+msgstr "Herstel vanaf floppie"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "enable"
-msgstr "Aktiveer"
+msgid "Add to LVM"
+msgstr "Voeg by LVM"
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Die opstelling van die Internetkonnkesiedeling is alreeds gedoen.\n"
-"Dis tans gedeaktiveer.\n"
-"\n"
-"Wat wil u doen?"
+#: ../../network/network.pm:1
+#, c-format
+msgid "DNS server"
+msgstr "DNS bediener"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Internetkonneksiedeling is gesper"
+msgid "Trinidad and Tobago"
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Internetkonneksiedeling is gedeaktiveer"
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr "LPD en LPRng ondersteun nie IPP-drukkers nie.\n"
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Disabling servers..."
-msgstr "Bedieners word gedeaktiveer..."
+msgid "simple"
+msgstr "eenvoudig"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "disable"
-msgstr "deaktiveer"
+msgid "Clear all"
+msgstr "Verwydeer almal"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Die opstelling van die Internetkonnkesiedeling is alreeds gedoen.\n"
-"Dis tans aktief.\n"
-"\n"
-"Wat wil u doen?"
+msgid "No test pages"
+msgstr "Geen toetsbladsye"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Internetkonneksiedeling is ontsper"
+msgid "Adapter %s: %s"
+msgstr "Toestel %s: %s"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
+msgid "Falkland Islands (Malvinas)"
msgstr ""
-#: ../../standalone/drakhelp:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
-msgstr ""
+msgid "Unknown model"
+msgstr "Onbekende model"
-#: ../../standalone/drakperm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Path"
+msgid "if set to yes, check files/directories writable by everybody."
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "group :"
-msgstr "Werkgroep:"
+msgid "authentication"
+msgstr "Magtiging"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "user :"
-msgstr "Gebruikerskode"
+msgid "Backup Now"
+msgstr "Stel lêerstelsels op"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Path selection"
-msgstr "Stoor pakketseleksie"
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#, c-format
+msgid "/_File"
+msgstr "/_Lêer"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "when checked, owner and group won't be changed"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
msgstr ""
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Use group id for execution"
-msgstr "Gebruik outobespeuring"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Use owner id for execution"
-msgstr "Gebruik outobespeuring"
-
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Set-GID"
+msgid "Tamil (ISCII-layout)"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Set-UID"
+msgid "Mayotte"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "sticky-bit"
-msgstr ""
+msgid "Creating auto install floppy..."
+msgstr "Outoinstallasieskyf word geskep."
-#: ../../standalone/drakperm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Property"
-msgstr "Poort"
+msgid "Searching for scanners ..."
+msgstr "Plaaslike drukker"
-#: ../../standalone/drakperm:1
+#: ../../steps.pm:1
#, fuzzy, c-format
-msgid "Permissions"
-msgstr "Weergawe: %s\n"
+msgid "Partitioning"
+msgstr "Druk"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Current user"
-msgstr "Aanvaar gebruiker"
+msgid "Russia"
+msgstr "Russies"
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "browse"
+msgid "ethernet card(s) detected"
+msgstr "ethernet kaart(e) bespeur"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Syslog"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Edit current rule"
+msgid "Can't create catalog!"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "edit"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../fsedit.pm:1
#, fuzzy, c-format
-msgid "Delete selected rule"
-msgstr "Verwyder tou"
+msgid "Not enough free space for auto-allocating"
+msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "delete"
-msgstr "Uitwis"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Set root password"
+msgstr "Kies 'root' se wagwoord"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Add a new rule at the end"
-msgstr "Voeg drukker by"
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
+msgstr ""
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "add a rule"
-msgstr "Voeg module by"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr "Alle data om partisie %s sal uitgewis word met die grootteverandering"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Move selected rule down one level"
+msgid "Internet connection configuration"
+msgstr "Internetkonneksiekonfigurasie"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "Scanning for TV channels"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Kernel:"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "/_About..."
+msgstr "/_Aangaande..."
+
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Down"
-msgstr "Klaar"
+msgid "Bengali"
+msgstr "Aktiveer"
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Move selected rule up one level"
-msgstr ""
+msgid "Preference: "
+msgstr "Voorkeure: "
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Up"
-msgstr ""
+msgid "Wizard..."
+msgstr "Assistent..."
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "select perm file to see/edit"
+msgid "Services: %d activated for %d registered"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
+msgid "Create a bootdisk"
+msgstr "Maar 'n herlaaiskyf"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Solomon Islands"
msgstr ""
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "permissions"
-msgstr "partisie %s"
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "(module %s)"
+msgstr "(module %s)"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "group"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Workgroup"
msgstr "Werkgroep:"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "user"
-msgstr "Gebruikerskode"
+msgid "Printer host name or IP"
+msgstr "Drukkerbedienernaam"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "path"
+msgid "Host Path or Module"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Name of printer should contain only letters, numbers and the underscore"
+msgstr ""
+
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Outoinstallasieskyf word geskep."
+msgid "Show current interface configuration"
+msgstr "Verander drukkerkonfigurasie"
-#: ../../standalone/drakpxe:1
+#: ../../help.pm:1
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
+msgid "Development"
+msgstr "Ontwikkeling"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
+msgid "Done"
+msgstr "Klaar"
-#: ../../standalone/drakpxe:1
+#: ../../network/drakfirewall.pm:1
#, fuzzy, c-format
-msgid "No image found"
-msgstr "Plaaslike drukker"
+msgid "Web Server"
+msgstr "Bediener"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\tDo not include System Files\n"
+msgstr ""
+
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Installation image directory"
-msgstr "Xpmac (installasievertoondrywer)"
+msgid "Chile"
+msgstr "Sluit af"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The DHCP end ip"
+msgid ""
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
+"\n"
+"Do not use \"scannerdrake\" for this device!"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
#, c-format
-msgid "The DHCP start ip"
-msgstr ""
+msgid "(already added %s)"
+msgstr "(%s alreeds bygevoeg)"
-#: ../../standalone/drakpxe:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
+msgid ", using command %s"
msgstr ""
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Koppelvlak %s (met module %s)"
-
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr "Kies asb. die netwerkkoppelvlak wat u wil gebruik vir die internet."
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Alt and Shift keys simultaneously"
+msgstr ""
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Flags"
msgstr ""
-"Nou dat u internetkonfigurasie opgestel is,\n"
-"moet u die rekenaar opstel om dit te deel.\n"
-"LW: U benodig 'n ware netwerkkaart om 'n lokalearea netwerk (LAN) op te "
-"stel.\n"
-"\n"
-"Wil u internetdeling opstel?\n"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Installation Server Configuration"
-msgstr "Sluit konfigurasie af"
+msgid "Add/Del Users"
+msgstr "Voeg gebruiker by"
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "PXE Server Configuration"
-msgstr "Sluit konfigurasie af"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Host/network IP address missing."
+msgstr ""
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Please wait, setting security options..."
-msgstr "Wag asb. installasie word voorberei"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "weekly"
+msgstr ""
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Please wait, setting security level..."
-msgstr "Sekuriteitsvlak word gestel."
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Settings"
+msgstr ""
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Periodic Checks"
+msgid "The entered host/network IP is not correct.\n"
msgstr ""
-#: ../../standalone/draksec:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "System Options"
-msgstr "Module opsies:"
+msgid "Here is the full list of available countries"
+msgstr "Hierdie is die volledige lys van beskikbare sleutelborde"
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Network Options"
-msgstr "Module opsies:"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Alternative test page (A4)"
+msgstr "Alternatiewe toetsbladsy (A4)"
-#: ../../standalone/draksec:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
+"Indien u oor al die gelyste CD's beskik, kliek OK.\n"
+"Indien u oor geen van die gelyste CD's beskik nie, kliek Kanselleer.\n"
+"Indien u net oor sekere CDs beskik, deselekteer die ander en kliek OK."
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Security Administrator:"
-msgstr "Eksterne lpd drukkeropsies"
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Wait please"
+msgstr ""
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Security Alerts:"
-msgstr "Sekuriteitsvlak word gestel."
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "PAP"
+msgstr "PAP"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Security Level:"
-msgstr "Sekuriteitsvlak word gestel."
+msgid "Backup user files"
+msgstr "Korrupte rugsteunlêer"
-#: ../../standalone/draksec:1
+#: ../../diskdrake/dav.pm:1
#, fuzzy, c-format
-msgid "(default value: %s)"
-msgstr " (Verstek)"
+msgid "New"
+msgstr "nuut"
-#: ../../standalone/draksec:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-" to the Internet as a client.\n"
-"\n"
-"High: There are already some restrictions, and more automatic checks "
-"are run every night.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
"\n"
-"Higher: The security is now high enough to use the system as a server "
-"which can accept\n"
-" connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-" should choose a lower level.\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
"\n"
-"Paranoid: This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-" features are at their maximum\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
"\n"
-"Security Administrator:\n"
-" If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-" email)"
-msgstr ""
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
"\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
"\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""
-#: ../../standalone/draksound:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"If you do not know what to choose, stay with the default option."
msgstr ""
-#: ../../standalone/draksound:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Load from floppy"
+msgstr "Laai vanaf floppie"
+
+#
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "No Sound Card detected!"
-msgstr "Nie gekonnekteer nieKabelkonneksie"
+msgid "The following printer was auto-detected. "
+msgstr "Dei volgende pakkette gaan verwyder word"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "%s BootSplash (%s) preview"
+msgid "Boot Floppy"
msgstr ""
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Generating preview ..."
-msgstr "Toestel word afgetas..."
-
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "You must choose an image file first!"
-msgstr "Tik drukkertoestel URI in"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Norwegian"
+msgstr "Norweegs"
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "ProgressBar color selection"
-msgstr "Drukkermodelkeuse"
+msgid "Searching for new scanners ..."
+msgstr "Plaaslike drukker"
-#: ../../standalone/draksplash:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
+msgid "Apache World Wide Web Server"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "saving Bootsplash theme..."
+msgid "stepping of the cpu (sub model (generation) number)"
msgstr ""
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "choose image file"
-msgstr "Kies 'n lêer"
-
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "choose image"
-msgstr "Kies 'n lêer"
+msgid "select path to restore (instead of /)"
+msgstr "Wat is u muistoestel?"
#: ../../standalone/draksplash:1
#, fuzzy, c-format
msgid "Configure bootsplash picture"
msgstr "Konfigureer dienste"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Make kernel message quiet by default"
+msgid "China"
msgstr ""
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "Display logo on Console"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr "Op watter seriaalpoort is u modem gekoppel?"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Choose color"
-msgstr "Kies 'n monitor"
+msgid "Georgia"
+msgstr "Norweegs"
-#: ../../standalone/draksplash:1
+#: ../../standalone/printerdrake:1
#, fuzzy, c-format
-msgid "Save theme"
-msgstr "Installeer stelsel"
+msgid "Reading data of installed printers..."
+msgstr "Plaaslike drukker"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Preview"
-msgstr "toestel"
+msgid " Erase Now "
+msgstr "Oordrag"
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "the color of the progress bar"
+msgid "server"
+msgstr "bediener"
+
+#: ../../install_any.pm:1
+#, c-format
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "Sit 'n FAT-geformatteerde skyf in aandrywer %s"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "yes means the processor has an arithmetic coprocessor"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "the height of the progress bar"
+msgid "Please Wait... Applying the configuration"
+msgstr "Wag asb... Konfigurasie word toegpas"
+
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
+#, c-format
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Welkom by GRUB, die bedryfstelselkieskaart!"
+
+#: ../../bootloader.pm:1
+#, c-format
+msgid "Grub"
+msgstr "Grub"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "SCSI controllers"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "the width of the progress bar"
+msgid " on LPD server \"%s\", printer \"%s\""
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
+msgid "Choosing a display manager"
msgstr ""
-#: ../../standalone/draksplash:1
+#
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Zeroconf Host name"
+msgstr "Rekenaarnaam"
+
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
+msgid "IP address should be in format 1.2.3.4"
+msgstr "IP-adres moet in 1.2.3.4. formaat wees"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Ecuador"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Add an item"
+msgstr "Voeg 'n gebruiker by"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "text box height"
+msgid "The printers on this machine are available to other computers"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "text width"
+msgid "I can't find needed image file `%s'."
+msgstr "Ek kan nie die nodige herlaaibeeld '%s' kry nie."
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"y coordinate of text box\n"
-"in number of characters"
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
+msgid "Shell"
+msgstr "Dop"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "PCI"
+msgstr "PCI"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Sao Tome and Principe"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Browse"
+msgid "Can't login using username %s (bad password?)"
msgstr ""
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Theme name"
-msgstr "Drukkernaam:"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Azerbaidjani (latin)"
+msgstr "Azerbaidjani (latyns)"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "final resolution"
-msgstr "Resolusie"
+msgid "Package not installed"
+msgstr "Verlaay installasie"
-#: ../../standalone/draksplash:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, fuzzy, c-format
-msgid "first step creation"
-msgstr "herlaaiskyfskepping"
+msgid "Become a MandrakeExpert"
+msgstr "Kundige"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgid "American Samoa"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
+msgid "Protocol"
+msgstr "Protokol"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Copy fonts on your system"
+msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "No TV Card detected!"
+msgid "Harddrake help"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
+msgid "Bogomips"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Mandrake Terminal Server Configuration"
+msgstr "Dra drukkerkonfigurasie oor"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Have a nice day!"
+msgid ""
+"\n"
+" DrakBackup Report Details\n"
+"\n"
+"\n"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "XawTV isn't installed!"
+msgid "Restore all backups"
msgstr ""
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Daar was 'n fout met die installasie van die pakkette:"
-
-#: ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Scanning for TV channels"
+msgid "if set to yes, check open ports."
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Scanning for TV channels in progress ..."
+msgid "This may take a moment to erase the media."
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Area:"
-msgstr ""
+msgid "You can't select/unselect this package"
+msgstr "U kan nie hierdie pakket selekteer/deselekteer nie"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "TV norm:"
-msgstr ""
+msgid "Warning"
+msgstr "Waarskuwing"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Please,\n"
-"type in your tv norm and country"
+"\n"
+"- Other Files:\n"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Australian Optus cable TV"
-msgstr ""
+msgid "Remote host name"
+msgstr "Eksterne bedienernaam"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Newzealand"
+msgid "deactivate now"
+msgstr "deaktiveer nou dadelik"
+
+#: ../../any.pm:1
+#, c-format
+msgid "access to X programs"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../install_interactive.pm:1
#, fuzzy, c-format
-msgid "France [SECAM]"
-msgstr "Frankryk"
+msgid "Computing the size of the Windows partition"
+msgstr "Gebruik die beskikbare spasie op die Windowspartisie"
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#: ../../standalone/drakxtv:1
#, fuzzy, c-format
-msgid "East Europe"
-msgstr "Europa"
+msgid "Italy"
+msgstr "Italiaans"
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "West Europe"
-msgstr "Europa"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Name of printer"
+msgstr "Drukkernaam"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "China (broadcast)"
-msgstr ""
+msgid "disable"
+msgstr "deaktiveer"
-#: ../../standalone/drakxtv:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "Japan (cable)"
+msgid "error unmounting %s: %s"
+msgstr "fout met onthegting van %s: %s"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Do it!"
+msgstr "Gaan voort!"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Cayman Islands"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Japan (broadcast)"
+msgid "%s not responding"
msgstr ""
-#: ../../standalone/drakxtv:1
+#
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Canada (cable)"
-msgstr "Kanadees (Quebec)"
+msgid "Select model manually"
+msgstr "Eksterne drukkernaam"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "USA (cable-hrc)"
-msgstr ""
+msgid "Format"
+msgstr "Formatteer"
-#: ../../standalone/drakxtv:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "USA (cable)"
+msgid ""
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
msgstr ""
+"Die mees algemene metode vir ADSL is om pppoe te gebruik.\n"
+"Daar is wel sekere konneksie wat pptp of DHCP gebruik.\n"
+"Indien u nie weet nie, kies 'gebruik pppoe'."
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "USA (broadcast)"
+msgid "Various"
+msgstr "Verskeie"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Zip"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"XawTV isn't installed!\n"
"\n"
"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "primary"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "secondary"
-msgstr "%d sekondes"
-
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Click on a device in the left tree in order to display its information here."
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Unknown"
-msgstr "Onbekende model"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "unknown"
-msgstr "Onbekende model"
+#: ../../printer/data.pm:1
+#, c-format
+msgid "PDQ"
+msgstr "PDQ"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Running \"%s\" ..."
-msgstr "Drukkerdata word gelees..."
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Albanian"
+msgstr "Albanies"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Run config tool"
+msgid "Lithuania"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Configure module"
-msgstr "Stel muistoestel op"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Information"
-msgstr "Vertoon inligting"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Detected hardware"
-msgstr "Sien hardeware inligting"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Harddrake2 version "
-msgstr "Hardeskyfdeteksie."
+#: ../../any.pm:1
+#, c-format
+msgid "Compact"
+msgstr "Kompak"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Detection in progress"
-msgstr "Op poort %s bespeur"
+msgid "Detected model: %s %s"
+msgstr "%s bespeur"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Author:"
-msgstr "Aftas"
+#: ../../share/advertising/03-software.pl:1
+#, c-format
+msgid "MandrakeSoft has selected the best software for you"
+msgstr ""
#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "About Harddrake"
-msgstr ""
+msgid "Local files"
+msgstr "Plaaslike lêers"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "/_About..."
-msgstr "/_Aangaande..."
+msgid "maybe"
+msgstr "moontlik"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "/_Report Bug"
+msgid "Panama"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Select a device !"
-msgstr "Selekteer 'n videokaart"
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Monitor"
+msgstr "Monitor"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Description of the fields:\n"
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
"\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Harddrake help"
-msgstr ""
+msgid "65 thousand colors (16 bits)"
+msgstr "65-duisend kleure (16 bis)"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/_Fields description"
-msgstr "Beskrywing"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
+msgstr ""
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "/_Help"
-msgstr "/_Help"
+msgid "Size: %d KB\n"
+msgstr "Groote: %d KB\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "/_Quit"
-msgstr "Verlaat"
+msgid "Remove fonts on your system"
+msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "Gebruik outobespeuring"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
+msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _modems"
-msgstr "Gebruik outobespeuring"
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Graphical interface at startup"
+msgstr "X met herlaai"
-#: ../../standalone/harddrake2:1
+#
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "/Autodetect _printers"
-msgstr "Gebruik outobespeuring"
-
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#, c-format
-msgid "/_Options"
-msgstr "/_Opsies"
+msgid "Please enter the directory to save:"
+msgstr "Toets asb. die muis"
#: ../../standalone/harddrake2:1
#, c-format
-msgid "the vendor name of the processor"
+msgid "format of floppies supported by the drive"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../raid.pm:1
#, c-format
-msgid "the vendor name of the device"
-msgstr ""
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "Nie genoeg partisies vir RAID vlak %d nie\n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "Aan watter seriaalpoort is u muis gekoppel?"
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
+msgstr ""
+"Hier is die bestaande drukkertoue.\n"
+"U kan byvoeg or verwyder soos nodig."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
-msgstr ""
+msgid "Connected"
+msgstr "Gekonnekteer"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Model stepping"
-msgstr "Formatering"
+msgid "USB printer \\#%s"
+msgstr "Geen drukker"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "the number of the processor"
-msgstr ""
+msgid "Macedonian"
+msgstr "Masedonies"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Processor ID"
+msgid "Bridges and system controllers"
msgstr ""
-#
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "network printer port"
-msgstr "Netwerkdrukker (sok)"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "/File/_Save"
+msgstr "/Lêer/_Stoor"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "the name of the CPU"
+msgid "Mali"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Name"
-msgstr "Naam: "
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "the number of buttons the mouse has"
-msgstr "2 knoppies"
-
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, fuzzy, c-format
-msgid "Number of buttons"
-msgstr "2 knoppies"
+msgid "No details"
+msgstr "Detail"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Official vendor name of the cpu"
-msgstr ""
+msgid "very nice"
+msgstr "baie oulik"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Model name"
-msgstr "Modulenaam"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
-msgstr ""
+msgid "Preview"
+msgstr "toestel"
-#: ../../standalone/harddrake2:1
+#
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Model"
-msgstr "Muis"
+msgid "Remote Control"
+msgstr "Eksterne drukker"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "hard disk model"
-msgstr "Kaartgeheue (DMA)"
+msgid "Please select media for backup..."
+msgstr "Kies asb. 'n taal om te gebruik."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "class of hardware device"
-msgstr ""
+msgid "XFree86 server: %s\n"
+msgstr "XFree86 bediener: %s\n"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Media class"
-msgstr ""
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Allow Thin Clients"
+msgstr "DHCP-Kliënt"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Sub generation of the cpu"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Level"
-msgstr "vlak"
+msgid "Georgian (\"Russian\" layout)"
+msgstr "Georgies (Russiese uitleg)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Format of floppies supported by the drive"
-msgstr ""
+msgid "/_Options"
+msgstr "/_Opsies"
-#: ../../standalone/harddrake2:1
+#
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Floppy format"
-msgstr "Formatteer"
+msgid "Your printer model"
+msgstr "Eksterne drukkernaam"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Halt bug"
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "F00f bug"
-msgstr ""
+#: ../../share/advertising/04-configuration.pl:1
+#, fuzzy, c-format
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "Dra drukkerkonfigurasie oor"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Save"
+msgstr "Toestand"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Whether the FPU has an irq vector"
+msgid "The %s is unsupported"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr ""
+msgid "Load the drivers for your usb devices."
+msgstr "Laai die drywers vir u USB-toestelle"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Disk"
+msgstr "Deens"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Is FPU present"
-msgstr ""
+msgid "Enter a printer device URI"
+msgstr "Tik drukkertoestel URI in"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Fdiv bug"
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Israel"
+msgstr "Israelies"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "French Guiana"
+msgstr "Frans"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Flags"
-msgstr ""
+msgid "default:LTR"
+msgstr "default:LTR"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr ""
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "add a rule"
+msgstr "Voeg module by"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Module"
-msgstr "Muis"
+msgid "A command line must be entered!"
+msgstr "'n Geldige URI moet verskaf word!"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
+msgid "Select user manually"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transfer printer configuration"
+msgstr "Dra drukkerkonfigurasie oor"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "New devfs device"
-msgstr "Netwerkportaaltoestel"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "Wil u die konneksie met herlaaityd aanskakel?"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "old static device name used in dev package"
+msgid ""
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Old device file"
-msgstr "Selekteer lOer"
+msgid "%s (Port %s)"
+msgstr "Poort"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "This field describes the device"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use network connection to backup"
+msgstr "Korrupte rugsteunlêer"
-#: ../../standalone/harddrake2:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Frequency (MHz)"
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Cpuid level"
-msgstr "Sekuriteitsvlak word gestel."
-
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
-msgstr ""
+msgid "Accept user"
+msgstr "Aanvaar gebruiker"
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, c-format
-msgid "Cpuid family"
-msgstr ""
+msgid "Server"
+msgstr "Bediener"
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr ""
+msgid "Bad choice, try again\n"
+msgstr "Swak keuse, probeer weer\n"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Coma bug"
+msgid "Heard and McDonald Islands"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
+msgid "No alternative driver"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Drive capacity"
-msgstr ""
+msgid "Toggle to expert mode"
+msgstr "Skakel oor na kundige gebruiksvlak"
-#: ../../standalone/harddrake2:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Size of the (second level) cpu cache"
-msgstr ""
+msgid "(on this machine)"
+msgstr "(op hierdie rekenaar)"
-#: ../../standalone/harddrake2:1
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "Cache size"
-msgstr "blokgrootte"
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "IP-adres moet in 1.2.3.4. formaat wees"
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
#, c-format
msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+"\"%s\" based winmodem detected, do you want to install needed software ?"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Location on the bus"
-msgstr ""
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Looking at packages already installed..."
+msgstr "U kan nie heirdie pakket verwyder nie. Dis alreeds geïnstalleer"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+msgid "Use Differential Backups"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Bus identification"
-msgstr "Magtiging"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Driver"
+msgstr "Drywer"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
msgstr ""
-#: ../../standalone/harddrake2:1
+#
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Bogomips"
-msgstr ""
+msgid "Printer on remote lpd server"
+msgstr "Eksterne LPD-drukker"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "EIDE/SCSI channel"
+msgid ""
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Channel"
-msgstr "Kanselleer"
-
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Bus"
-msgstr ""
+msgid "No mouse"
+msgstr "Geen muis"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr ""
+msgid "Germany"
+msgstr "Duitsland"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, fuzzy, c-format
-msgid "Alternative drivers"
-msgstr "Alternatiewe toetsbladsy (A4)"
+msgid "Austria"
+msgstr "seriaal"
-#: ../../standalone/keyboarddrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
+msgid "Run \"sndconfig\" after installation to configure your sound card"
msgstr ""
-"Wil u hê dat die 'BackSpace' sleutel moet uitvee in die konsole ('n 'Delete' "
-"terugstuur)?"
-#: ../../standalone/keyboarddrake:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Wat is u sleutelborduitleg?"
+msgid "Collapse Tree"
+msgstr "Maak boom toe"
-#: ../../standalone/livedrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Kon nie die intydse opgradering begin nie !!!\n"
+msgid "Auto Install Configurator"
+msgstr "Outoinstallasiekonfigurasieprogram"
-#: ../../standalone/livedrake:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Dit asb. die instasllasie CDROM in die aandrywer en druk OK. Indien u nie\n"
-"hieroor beskik nie, druk Kanselleer om die intydse opgradering te vermy."
+msgid "Configure networking"
+msgstr "Stel netwerk op"
-#: ../../standalone/livedrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Change Cd-Rom"
-msgstr "Verander CDROM"
+msgid "Where do you want to install the bootloader?"
+msgstr "Waar wil u die herlaaistelsel installeer"
-#: ../../standalone/localedrake:1
+#: ../../help.pm:1
#, c-format
-msgid "The change is done, but to be effective you must logout"
+msgid ""
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Save as.."
+msgid "The %s is not supported by this version of Mandrake Linux."
msgstr ""
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Please enter your email address below "
-msgstr "Probeer asb. weer"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "DHCP client"
+msgstr "DHCP-kliënt"
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "alert configuration"
-msgstr "Kleurkonfigurasie"
+#: ../../partition_table.pm:1
+#, c-format
+msgid "Restoring from file %s failed: %s"
+msgstr "Herstel van léer %s het gefaal: %s"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech Muis (seriaal, ou C7 tipe)"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Are you sure that you want to set up printing on this machine?\n"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "load setting"
-msgstr "Formatering"
+msgid "New devfs device"
+msgstr "Netwerkportaaltoestel"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
+msgid "ERROR: Cannot spawn %s."
msgstr ""
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "service setting"
-msgstr "interessant"
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Boot Style Configuration"
+msgstr "Herlaaistylkonfigurasie"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Xinetd Service"
-msgstr "Drukkerbediener"
+msgid "Automatic time synchronization"
+msgstr "Outotydsinkronisasie met NTP"
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Webmin Service"
-msgstr "Dienste"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Backup files not found at %s."
+msgstr ""
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "SSH Server"
-msgstr "NIS-bediener"
+#: ../../share/advertising/01-thanks.pl:1
+#, c-format
+msgid "Thank you for choosing Mandrake Linux 9.1"
+msgstr ""
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Samba Server"
-msgstr "NIS-bediener"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Armenian (phonetic)"
+msgstr "Armenies (Foneties)"
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
#, fuzzy, c-format
-msgid "Postfix Mail Server"
-msgstr "Postfix e-posbediener, Inn netnuusbediener"
+msgid "Card model:"
+msgstr "Kaartgeheue (DMA)"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Ftp Server"
-msgstr "NIS-bediener"
+msgid "Thin Client"
+msgstr "DHCP-Kliënt"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Domain Name Resolver"
-msgstr "Domeinnaam"
+msgid "Start Server"
+msgstr "NIS-bediener"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Apache World Wide Web Server"
+msgid "Turkmenistan"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Welkom by die proksiekonfigurasienutsprogram.\n"
-"\n"
-"Hier kan u die HTTP en FTP-instaanbedieners\n"
-"opstel met of sonder aantekenkodes en wagwoorde\n"
+msgid "All remote machines"
+msgstr "(op hierdie rekenaar)"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, fuzzy, c-format
-msgid "Mail alert configuration"
-msgstr "Konfigurasie"
+msgid "Install themes"
+msgstr "Installeer stelsel"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mail alert"
+msgid ""
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "please wait, parsing file: %s"
+msgid "Espanol"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Content of the file"
-msgstr ""
+msgid "Preparing installation"
+msgstr "Berei installasie voor"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Calendar"
+msgid "Edit selected host/network"
msgstr ""
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "Choose file"
-msgstr ""
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Add User -->"
+msgstr "Voeg gebruiker by"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "but not matching"
+msgid "Nauru"
msgstr ""
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "matching"
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "True Type fonts installation"
+msgstr "Berei installasie voor"
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Settings"
+msgid "Auto-detect printers connected directly to the local network"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "A tool to monitor your logs"
-msgstr ""
+msgid "LAN configuration"
+msgstr "LAN-konfigurasie"
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "search"
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "hard disk model"
+msgstr "Kaartgeheue (DMA)"
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Mandrake Tools Explanation"
-msgstr ""
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "U kan nie LVM logiese volume vir hegpunt %s gebruik nie."
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Syslog"
+msgid "Get Windows Fonts"
msgstr ""
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Messages"
-msgstr "Beginboodskap"
-
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "User"
-msgstr "Gebruikerskode"
-
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "/Help/_About..."
-msgstr "/Help/_Aangaande..."
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "/Options/Test"
-msgstr "/Opsies/Toets"
+msgid "Iranian"
+msgstr "Iranies"
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "/File/-"
-msgstr "/Lêer/-"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Croatia"
+msgstr "Kroaties"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "/File/Save _As"
-msgstr "/Lêer/Stoor _as"
+msgid "Gateway:"
+msgstr "Portaal:"
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "<control>S"
-msgstr "<control>S"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Add server"
+msgstr "Voeg gebruiker by"
-#: ../../standalone/logdrake:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/File/_Save"
-msgstr "/Lêer/_Stoor"
+msgid "Remote printer name"
+msgstr "Eksterne drukkernaam"
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "<control>O"
-msgstr "<control>O"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together in order to highly reduce hacking risks."
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "/File/_Open"
-msgstr "/Lêer/_Oopmaak"
+msgid "Device: "
+msgstr "Toestel:"
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "<control>N"
-msgstr "<control>N"
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "Printerdrake"
+msgstr "Drukker"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "/File/_New"
-msgstr "/Lêer/_Nuut"
+msgid "License agreement"
+msgstr "Lisensieooreenkoms"
-#: ../../standalone/logdrake:1
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "System Options"
+msgstr "Module opsies:"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Show only for the selected day"
+msgid "Please enter the directory where backups are stored"
msgstr ""
-#: ../../standalone/mousedrake:1
-#, c-format
-msgid "Emulate third button?"
-msgstr "Emuleer derde knop?"
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid "Please choose the desired security level"
+msgstr "Gebruik sekuriteitsvlak"
-#: ../../standalone/mousedrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Please choose your mouse type."
-msgstr "Wat is u muistoestel?"
+msgid "This host is already in the list, it cannot be added again.\n"
+msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Connect %s"
-msgstr "Konnekteer"
+msgid ", USB printer"
+msgstr "Geen drukker"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Disconnect %s"
-msgstr "Diskonnekteer"
-
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
+msgid "Choose the applications that will support the fonts:"
+msgstr "Kies die partisies om te formatteer"
-#: ../../standalone/net_monitor:1
+#: ../../steps.pm:1
#, c-format
-msgid "received"
-msgstr ""
+msgid "Configure X"
+msgstr "Stel X op"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "transmitted"
-msgstr ""
+msgid "Turkish (traditional \"F\" model)"
+msgstr "Turks (tradisionele \"F\" model)"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "received: "
-msgstr ""
+msgid "Congratulations!"
+msgstr "Geluk!"
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid "sent: "
-msgstr ""
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Use owner id for execution"
+msgstr "Gebruik outobespeuring"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Local measure"
-msgstr "Plaaslike lêers"
+msgid "Down"
+msgstr "Klaar"
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "average"
+msgid "Raw printer (No driver)"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../network/modem.pm:1
#, fuzzy, c-format
-msgid "Color configuration"
-msgstr "Kleurkonfigurasie"
+msgid "Install rpm"
+msgstr "Installasie"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
msgstr ""
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connection complete."
-msgstr "Konneksiespoed"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Time remaining "
+msgstr "Tyd oor "
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Disconnection from the Internet complete."
-msgstr ""
+msgid "UK keyboard"
+msgstr "VK sleutelbord"
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Disconnection from the Internet failed."
-msgstr ""
+msgid "Unmount"
+msgstr "Ontheg"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Connecting to the Internet "
-msgstr "Konnekteer aan die internet"
+msgid "Uninstall Fonts"
+msgstr "Deïnstallasie van RPMs"
-#: ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, fuzzy, c-format
-msgid "Disconnecting from the Internet "
-msgstr "Konnekteer aan die internet"
+msgid "Microsoft Explorer"
+msgstr "Microsoft IntelliMouse"
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Konneksie word getoets..."
+#: ../../keyboard.pm:1
+#, c-format
+msgid "German (no dead keys)"
+msgstr "Duits (geen dooie sleutels)"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Logs"
-msgstr ""
+msgid "Transferring %s..."
+msgstr "%s word oorgedra..."
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connection Time: "
-msgstr "Konneksietipe:"
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "32 thousand colors (15 bits)"
+msgstr "32-duisend kleure (15 bis)"
-#: ../../standalone/net_monitor:1
+#: ../../any.pm:1
#, c-format
-msgid "Receiving Speed:"
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Sending Speed:"
-msgstr "Stoor in lêer"
+msgid "Reboot"
+msgstr "Basis"
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Statistics"
+msgid "Gambia"
msgstr ""
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Profile "
-msgstr "Profiel:"
-
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Network Monitoring"
-msgstr "Netwerkkonfigurasie"
-
-#: ../../standalone/printerdrake:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Reading data of installed printers..."
-msgstr "Plaaslike drukker"
+msgid "Mandrake Control Center"
+msgstr "Beheersentrum"
-#: ../../standalone/scannerdrake:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Name/IP address of host:"
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
+msgid ""
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scannerdrake"
-msgstr "Selekteer 'n videokaart"
-
-#
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Toets asb. die muis"
-
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
+msgid "\t-Tape \n"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Sharing of local scanners"
-msgstr "Plaaslike drukker"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "This machine"
-msgstr "(op hierdie rekenaar)"
+#: ../../standalone/drakhelp:1
+#, c-format
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Remove selected host"
-msgstr "Verwyder tou"
+msgid "Remember this password"
+msgstr "Geen wagwoord"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Edit selected host"
-msgstr "%s bespeur"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Internet Connection Sharing is now enabled."
+msgstr "Internetkonneksiedeling is geaktiveer"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Add host"
-msgstr "Voeg gebruiker by"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t-Network by SSH.\n"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "These are the machines from which the scanners should be used:"
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Usage of remote scanners"
-msgstr "Gebruik beskikbare spasie"
+#: ../../help.pm:1 ../../install_interactive.pm:1
+#, c-format
+msgid "Use the free space on the Windows partition"
+msgstr "Gebruik die beskikbare spasie op die Windowspartisie"
#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "All remote machines"
-msgstr "(op hierdie rekenaar)"
+msgid "%s found on %s, configure it automatically?"
+msgstr "Wil u 'n drukwerk nou konfigureer?"
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Use the scanners on hosts: "
+msgid "XFree86 driver: %s\n"
+msgstr "XFree86-drywer: %s\n"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "This host/network is already in the list, it cannot be added again.\n"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use scanners on remote computers"
+msgid ""
+"\n"
+" DrakBackup Report \n"
+"\n"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Druk"
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the packages you want to install"
+msgstr "Kies die pakkette wat u wil installeer"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "The scanners on this machine are available to other computers"
+msgid "Papua New Guinea"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
+msgid "Serbian (cyrillic)"
+msgstr "Serwies (Kirillies)"
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "Make kernel message quiet by default"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
msgstr ""
+"Wil u hierdie drukker (\"%s\")\n"
+"die verstek drukker maak?"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Re-generating list of configured scanners ..."
+msgid "The DHCP end range"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for new scanners ..."
-msgstr "Plaaslike drukker"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for configured scanners ..."
-msgstr "Plaaslike drukker"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scanner sharing"
-msgstr "Druk"
-
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Add a scanner manually"
-msgstr ""
+msgid "Creating bootdisk..."
+msgstr "Herlaaiskyf word geskryf"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Search for new scanners"
-msgstr "Plaaslike drukker"
+msgid "Wait please, testing your connection..."
+msgstr "Konneksie word getoets..."
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
-msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
+msgid "Bringing down the network"
+msgstr "Netwerk op pad af"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Login ID"
+msgstr "Aantekenkode"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
msgstr ""
+"NFS is 'n populêre protokol vir lêerdeling oor TCP/IP netwerke.\n"
+"Hierdie diens vorosien die NFS-lêersluitfunksionaliteit."
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "choose device"
-msgstr "Herlaaitoestel"
-
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr ""
+msgid "DHCP Client"
+msgstr "DHCP-Kliënt"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for scanners ..."
-msgstr "Plaaslike drukker"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "dismiss"
+msgstr "ignoreer/sien oor"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Auto-detect available ports"
-msgstr "Gebruik outobespeuring"
+msgid "Printing/Scanning on \"%s\""
+msgstr "Netwerk op pad af"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr ""
+msgid "omit raid modules"
+msgstr "laat RAID-modules weg"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
+"lpd is die drukkerdiensprogram en is nodig vir lpr om te funksioneer.\n"
+"Dit is 'n diens wat drukstukke na drukkers toe reguleer."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "The %s is unsupported"
-msgstr ""
+msgid "Internet Connection Configuration"
+msgstr "Internetkonneksiekonfigurasie"
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "The %s is not known by this version of Scannerdrake."
+msgid "comma separated numbers"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
+msgid ""
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Port: %s"
-msgstr "Poort"
-
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ", "
+msgid "Move selected rule up one level"
msgstr ""
#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Detected model: %s"
-msgstr "%s bespeur"
-
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid " ("
-msgstr ""
+msgid ""
+"The following scanner\n"
+"\n"
+"%s\n"
+"is available on your system.\n"
+msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Select a scanner model"
-msgstr "Selekteer 'n videokaart"
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "Wil u die werklik die drukker verwyder?"
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "Wil u 'n drukwerk nou konfigureer?"
+msgid "I can't find any room for installing"
+msgstr "Ek kon geen plek vir installasie vind nie."
-#: ../../standalone/service_harddrake:1
-#, fuzzy, c-format
-msgid "Hardware probing in progress"
-msgstr "Op poort %s bespeur"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Default printer"
+msgstr "Verstek drukker"
-#: ../../standalone/service_harddrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Some devices were added:\n"
+msgid ""
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
msgstr ""
+"U het meer as een internetkonneksiemetode opgste.\n"
+"Kies die een wat u verlang.\n"
+"\n"
-#: ../../standalone/service_harddrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr ""
+msgid "Modify RAID"
+msgstr "Verander RAID"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
msgstr ""
+"Ek het 'n ISDB PCI-kaart gevind, maar ek ken nie die tipe nie. Kies asb.'n "
+"PCI-kaart op die volgende skerm."
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../any.pm:1
#, c-format
-msgid "Welcome to the Open Source world."
-msgstr ""
+msgid "Add user"
+msgstr "Voeg gebruiker by"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr ""
+msgid "RAID-disks %s\n"
+msgstr "RAID-skywe %s\n"
-#: ../../share/advertising/02-community.pl:1
-#, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Liberia"
+msgstr "seriaal"
-#: ../../share/advertising/02-community.pl:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
msgstr ""
-#: ../../share/advertising/02-community.pl:1
+#: ../../steps.pm:1
#, c-format
-msgid "Build the future of Linux!"
-msgstr ""
+msgid "Choose your keyboard"
+msgstr "Kies u sleutelbord"
-#: ../../share/advertising/03-software.pl:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
-msgstr ""
+msgid "Format partitions"
+msgstr "Formateer partisies"
-#: ../../share/advertising/03-software.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Automatic correction of CUPS configuration"
+msgstr "Outomatiese CUPS konfigurasie"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Running \"%s\" ..."
+msgstr "Drukkerdata word gelees..."
+
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
+msgid "enable radio support"
msgstr ""
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scanner sharing to hosts: "
+msgstr "Druk"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr ""
+msgid "Loopback file name: %s"
+msgstr "Teruglus lêernaam: %s"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "Op watter seriaalpoort is u modem gekoppel?"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
+msgid "Do not transfer printers"
+msgstr "Moet nie drukkers oordra nie"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "Dra drukkerkonfigurasie oor"
+msgid "Delay before booting the default image"
+msgstr "Wagperiode voro verstekstelsel gelaai word"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakfont:1
#, c-format
msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+" DUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
msgstr ""
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check for multisession CD"
+msgstr "Kliek asb. op 'n partisie"
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "user"
+msgstr "Gebruikerskode"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Hard Disk to backup"
+msgstr "Korrupte rugsteunlêer"
+
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
#, c-format
-msgid "A customizable environment"
-msgstr ""
+msgid "Configure"
+msgstr "Konfigureer"
-#: ../../share/advertising/06-development.pl:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scannerdrake"
+msgstr "Selekteer 'n videokaart"
+
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
msgstr ""
-#: ../../share/advertising/06-development.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
+msgid "Backup Users"
msgstr ""
-#: ../../share/advertising/07-server.pl:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
msgstr ""
+"Tik asb die rekenaarnaam in.\n"
+"Dit moet 'n volle gekwalifiseerde naam wees,\n"
+"bv. ``myne.mywerk.co.za''.\n"
+"U mag ook die netwerkhek byvoeg indien daar een is"
-#: ../../share/advertising/07-server.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Turn your computer into a reliable server"
-msgstr ""
+msgid "Select Printer Spooler"
+msgstr "Kies drukkerspoelprogram"
-#: ../../share/advertising/08-store.pl:1
-#, c-format
-msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
-msgstr ""
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Create new theme"
+msgstr "Kies 'n nuwe grootte"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The official MandrakeSoft Store"
+msgid "Mandrake Tools Explanation"
msgstr ""
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "No image found"
+msgstr "Plaaslike drukker"
+
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
msgstr ""
+"Sekere belangrike pakkette het nie korrek geïnstalleer nie.\n"
+"Óf die CDROM-aandrywer óf die CD is foutief.\n"
+"Toets die CD op 'n werkende Linux installasie met \"rpm -qpl Mandrake/RPMS/*."
+"rpm\"\n"
-#: ../../share/advertising/09-mdksecure.pl:1
-#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
-msgstr ""
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Detected model: %s"
+msgstr "%s bespeur"
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakedm:1
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Optimize your security by using Mandrake Linux"
+msgid "if set to yes, run the daily security checks."
msgstr ""
-#: ../../share/advertising/11-mnf.pl:1
-#, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Azerbaijan"
+msgstr "Albanies"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
+msgid "No tape in %s!"
msgstr ""
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr ""
+msgid "Dvorak (US)"
+msgstr "Dvorak (VSA)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr ""
+msgid "How is the printer connected?"
+msgstr "Hoe is die drukker gekonekteer?"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Become a MandrakeExpert"
-msgstr "Kundige"
+msgid "Security level"
+msgstr "Sekuriteitsvlak word gestel."
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
-#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr ""
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "final resolution"
+msgstr "Resolusie"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr ""
+msgid "Services"
+msgstr "Dienste"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
-#, fuzzy, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "Kundige"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "4 MB"
+msgstr "4 MB"
#: ../../share/compssUsers:999
msgid "Office Workstation"
@@ -17091,10 +17129,6 @@ msgstr ""
"gnumeric), PDF-sigprogramme, ens."
#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Werkstasie"
-
-#: ../../share/compssUsers:999
msgid "Game station"
msgstr "Speletjiesrekenaar"
@@ -17170,10 +17204,6 @@ msgstr ""
"versameling bygaande hulpprogramme"
#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafiese omgewing"
-
-#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Gnome werkstasie"
@@ -17194,10 +17224,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm, ens."
#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Ontwikkeling"
-
-#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "C en C++ ontwikkelingsprogrammateke, programme en insluitlêers"
@@ -17269,40 +17295,82 @@ msgstr "NFS, SMB, Instaan- , SSH (Bedieners)"
#: ../../share/compssUsers:999
#, fuzzy
-msgid "Audio station"
-msgstr "Multimediastasie"
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr ""
+"Stel hulpprogramme om e-pos en netnuus te lees en te stuur (pine, mutt, tin) "
+"en om ook die web deur te blaai."
+
+#~ msgid "Internet connection & configuration"
+#~ msgstr "Internetkonneksie en konfigurasie"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Sound playing/editing programs"
-msgstr "Klank- en videospelers/redigeerders"
+#~ msgid "Configure the connection"
+#~ msgstr "Stel netwerk op"
+
+#~ msgid "Disconnect"
+#~ msgstr "Diskonnekteer"
+
+#~ msgid "Connect"
+#~ msgstr "Konnekteer"
+
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "U kan u konneksie herkonfigureer."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "U kan aan die internet konnekter of u konneksie herkonfigureer."
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "U is nie tans aan die internet gekonnekteer nie."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can disconnect or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "U kan diskonnekteer or herkonfigureer."
+
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "U is tans aan die internet gekonnekteer."
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Video station"
-msgstr "Speletjiesrekenaar"
+#~ msgid "Write %s"
+#~ msgstr "XFree %s"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Video playing programs"
-msgstr "Klank- en videospelers/redigeerders"
+#~ msgid "Author:"
+#~ msgstr "Aftas"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Graphic station"
-msgstr "Speletjiesrekenaar"
+#~ msgid "Audio station"
+#~ msgstr "Multimediastasie"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Graphics programs"
-msgstr "Grafiese programme soos Die GIMP"
+#~ msgid "Sound playing/editing programs"
+#~ msgstr "Klank- en videospelers/redigeerders"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr ""
-"Stel hulpprogramme om e-pos en netnuus te lees en te stuur (pine, mutt, tin) "
-"en om ook die web deur te blaai."
+#~ msgid "Video station"
+#~ msgstr "Speletjiesrekenaar"
+
+#, fuzzy
+#~ msgid "Video playing programs"
+#~ msgstr "Klank- en videospelers/redigeerders"
+
+#, fuzzy
+#~ msgid "Graphic station"
+#~ msgstr "Speletjiesrekenaar"
+
+#, fuzzy
+#~ msgid "Graphics programs"
+#~ msgstr "Grafiese programme soos Die GIMP"
#, fuzzy
#~ msgid "Printer sharing"
@@ -17473,10 +17541,6 @@ msgstr ""
#~ "nie, dan het u nie /boot nodig nie."
#, fuzzy
-#~ msgid "Upgrade"
-#~ msgstr "Opgradeer"
-
-#, fuzzy
#~ msgid "Do you want to configure another printer?"
#~ msgstr "Wil u die konfigurasie toets?"
diff --git a/perl-install/share/po/ar.po b/perl-install/share/po/ar.po
index 788f85633..634899b82 100644
--- a/perl-install/share/po/ar.po
+++ b/perl-install/share/po/ar.po
@@ -6,7 +6,7 @@
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
"PO-Revision-Date: 2003-03-04 16:58-0300\n"
"Last-Translator: Mohammed Gamal <f2c2001@yahoo.com>\n"
"Language-Team: Arabic\n"
@@ -15,948 +15,1756 @@ msgstr ""
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 0.9.6\n"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Scanning partitions to find mount points"
+msgstr "ŰŹŰ§Ű±ÙŠ Űčمل Ù…ŰłŰ­ للŰȘŰŹŰČۊۧŰȘ Ù„Ű„ÙŠŰŹŰ§ŰŻ Ù†Ù‚Ű§Ű· Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of suid root files."
+msgstr "if set to yes, check additions/removals of suid root files."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t\tErase=%s"
+msgstr "\t\tErase=%s"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "network printer port"
+msgstr "Ù…Ù†ÙŰ° ۷ۧۚŰčŰ© Ű§Ù„ŰŽŰšÙƒŰ©"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Please insert floppy disk:"
+msgstr "ÙŰ¶Ù„Ű§Ù‹ ŰŁŰŻŰźÙ„ Ù‚Ű±Ű” Ù…Ű±Ù†:"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "PCMCIA"
+msgstr "PCMCIA"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
+"The backup partition table has not the same size\n"
+"Still continue?"
msgstr ""
-"Ű§Ù„Ù…ŰŽŰ§Ű±ÙƒŰ© لكل Ù…ŰłŰȘŰźŰŻÙ… ŰȘŰłŰȘŰźŰŻÙ… Ű§Ù„Ù…ŰŹÙ…ÙˆŰčŰ© \"fileshare\".\n"
-"يمكنك ŰŁÙ† ŰȘŰłŰȘŰźŰŻÙ… userdrake Ù„Ű„Ű¶Ű§ÙŰ© Ù…ŰłŰȘŰźŰŻÙ… في Ù‡Ű°Ù‡ Ű§Ù„Ù…ŰŹÙ…ÙˆŰčŰ©."
+"ŰŹŰŻÙˆÙ„ Ű§Ù„ŰȘÙ‚ŰłÙŠÙ… Ű§Ù„Ù…Ű­ÙÙˆŰž Ù„ÙŠŰł ŰšÙ†ÙŰł Ű§Ù„Ű­ŰŹÙ…\n"
+"Ù„Ű§ ŰČلŰȘ ŰȘŰ±ÙŠŰŻ Ű§Ù„Ű„ÙƒÙ…Ű§Ù„ŰŸ"
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Cancel"
-msgstr "Ű§Ù„Űșۧۥ"
+msgid "Which username"
+msgstr "ŰŁÙŠ Ű§ŰłÙ… Ù…ŰłŰȘŰźŰŻÙ…"
#: ../../any.pm:1
#, c-format
-msgid "Launch userdrake"
-msgstr "ŰŽŰșّل userdrake"
+msgid "Which type of entry do you want to add?"
+msgstr "Ù…Ű§ نوŰč Ű§Ù„Ù…ŰŻŰźÙ„ Ű§Ù„Ű°ÙŠ ŰȘŰ±ÙŠŰŻ Ű§Ű¶Ű§ÙŰȘÙ‡ŰŸ"
-#: ../../any.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Restore partition table"
+msgstr "ۧ۳ŰȘŰčۧۯ۩ ŰŹŰŻÙˆÙ„ Ű§Ù„ŰȘÙ‚ŰłÙŠÙ…"
+
+#: ../../printer/cups.pm:1
+#, c-format
+msgid "On CUPS server \"%s\""
+msgstr "Űčلى ŰźŰ§ŰŻÙ… CUPS \"%s\""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Post-install configuration"
+msgstr "ŰȘÙ‡ÙŠŰŠŰ© Ù…Ű§ ŰšŰčŰŻ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``%s'' instead"
+msgstr "ۧ۳ŰȘŰźŰŻÙ… ``%s'' ŰšŰŻÙ„Ű§ من Ű°Ù„Ùƒ"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Type"
+msgstr "Ű§Ù„Ù†ÙˆŰč"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
"\n"
-"\"Custom\" permit a per-user granularity.\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
msgstr ""
-"هل ŰȘŰ±ÙŠŰŻ Ű§Ù„ŰłÙ…Ű§Ű­ Ù„Ù„Ù…ŰłŰȘŰźŰŻÙ…ÙŠÙ† ŰšÙ…ŰŽŰ§Ű±ÙƒŰ© ŰšŰč۶ Ű§Ù„ŰŁŰŻÙ„Ű© Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙ‡Ù…ŰŸ\n"
-"Ű§Ù„ŰłÙ…Ű§Ű­ ŰšŰ°Ù„Ùƒ ŰłÙŠŰłÙ…Ű­ Ù„Ù„Ù…ŰłŰȘŰźŰŻÙ…ÙŠÙ† ŰšŰŁÙ† ÙŠÙ†Ù‚Ű±ÙˆŰ§ ŰČ۱ Ű§Ù„Ù…ŰŽŰ§Ű±ÙƒŰ© في ÙƒÙˆÙ†ÙƒÙŠÙˆŰ±Ű± و نوŰȘÙŠÙ„ÙˆŰł.\n"
"\n"
-"\"Ù…ŰźŰ”Ű”\" ÙŠŰłÙ…Ű­ لك ŰšŰčمل ۧŰčۯۧۯۧŰȘ ۟ۧ۔ لكل Ù…ŰłŰȘŰźŰŻÙ….\n"
+"ŰŁÙŠŰ¶Ű§Ù‹ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…Ù‡ÙŠŰŠŰ© ŰšÙ…Ù„ÙŰ§ŰȘ PPD من Ù…Ű”Ù†Ù‘ŰčÙŠÙ‡Ű§ ŰŁÙˆ ŰšÙ…ŰŽŰșÙ„Ű§ŰȘ CUPS Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙ‡Ű§ Ù„Ű§ "
+"يمكن Ù†Ù‚Ù„Ù‡Ű§."
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Ű§Ù„Ű­ŰČÙ…Ű© Ű§Ù„Ű¶Ű±ÙˆŰ±ÙŠŰ© %s Ù…ÙÙ‚ÙˆŰŻŰ©"
+msgid "Sri Lanka"
+msgstr "ŰłŰ±ÙŠÙ„Ű§Ù†ÙƒŰ§"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
-msgstr "يمكنك Ű§Ù„ŰȘŰ”ŰŻÙŠŰ± ۚۧ۳ŰȘŰźŰŻŰ§Ù… NFS ŰŁÙˆ Samba. ŰŁÙŠ Ù…Ù†Ù‡Ù…Ű§ ŰȘŰ±ÙŠŰŻ"
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr ""
+"Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„ŰȘŰ§Ù„ÙŠŰ©\n"
+"\n"
+"%s%s\n"
+"مŰȘŰ”Ù„Ű© Ù…ŰšŰ§ŰŽŰ±Ű©Ù‹ ŰšÙ†ŰžŰ§Ù…Ùƒ"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Ű§Ù„Ű­ŰČÙ…Ű© %s ÙŠŰŹŰš ŰŁÙ† ŰȘÙŰ«ŰšÙ‘ŰȘ. هل ŰȘŰ±ÙŠŰŻ ŰȘŰ«ŰšÙŠŰȘÙ‡Ű§ŰŸ"
+msgid "Central African Republic"
+msgstr "ŰŹÙ…Ù‡ÙˆŰ±ÙŠŰ© ÙˆŰłŰ· ŰŁÙŰ±ÙŠÙ‚ÙŠŰ©"
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Custom"
-msgstr "Ù…ŰźŰ”Ű”"
+msgid "Gateway device"
+msgstr "ŰŹÙ‡Ű§ŰČ Ű§Ù„ŰšÙˆŰ§ŰšŰ©"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Allow all users"
-msgstr "Ű§ŰłÙ…Ű­ لكل Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…ÙŠÙ†"
+msgid "Net Method:"
+msgstr "Net Method:"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "No sharing"
-msgstr "Ù„Ű§ Ù…ŰŽŰ§Ű±ÙƒŰ©"
+msgid "Ethernetcard"
+msgstr "ŰšŰ·Ű§Ù‚Ű© Ű§ÙŠŰ«Ű±Ù†ŰȘ"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "More"
-msgstr "Ű§Ù„Ù…ŰČÙŠŰŻ"
+msgid "Parameters"
+msgstr "Parameters"
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Here is the full list of available countries"
-msgstr "Ù‡Ű§ هي Ù‚Ű§ŰŠÙ…Ű© ÙƒŰ§Ù…Ù„Ű© ŰšÙƒÙ„ Ù„ÙˆŰ­Ű§ŰȘ Ű§Ù„ŰšÙ„Ű§ŰŻ Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű©"
+msgid "Auto-detect"
+msgstr "ŰȘŰ­Ù‚Ù‚ ŰąÙ„ÙŠ"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please choose your country."
-msgstr "ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ ŰšÙ„ŰŻÙƒ."
+msgid "Interface:"
+msgstr "Ű§Ù„ÙˆŰ§ŰŹÙ‡Ű©:"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid " / Region"
-msgstr "Ű±ÙŠÙˆÙ†ÙŠÙˆÙ†"
+#: ../../steps.pm:1
+#, c-format
+msgid "Select installation class"
+msgstr "ۧ۟ŰȘ۱ نوŰč Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Country"
-msgstr "Ű§Ù„ŰšÙ„ŰŻ"
+msgid "on CDROM"
+msgstr "Űčلى Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹ"
-#: ../../any.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "All languages"
-msgstr "كل Ű§Ù„Ù„ŰșۧŰȘ"
+msgid ""
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
+msgstr ""
+"Ù„Ű§ ÙŠŰšŰŻÙˆ ŰŁÙ† Ű§Ù„Ù†ŰžŰ§Ù… مŰȘŰ”Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ.\n"
+"Ű­Ű§ÙˆÙ„ ۧŰčۧۯ۩ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ÙˆŰ”Ù„Ű©."
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use Unicode by default"
-msgstr "ۧ۳ŰȘŰźŰŻÙ… ÙŠÙˆÙ†ÙŠÙƒÙˆŰŻ Ű§ÙŰȘŰ±Ű§Ű¶ÙŠŰ§Ù‹"
+msgid ""
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
+msgstr ""
+"ÙˆŰ”Ù‘Ù„ Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„Ù‰ ŰźŰ§ŰŻÙ… Ù„ÙŠÙ†ÙƒŰł و ۧۏŰčل Ù…Ű§ÙƒÙŠÙ†Ű§ŰȘ Windows ŰȘŰȘŰ”Ù„ ŰšÙ‡ كŰčÙ…Ù„Ű§ŰĄ.\n"
+"\n"
+"هل ŰȘŰ±ÙŠŰŻ فŰčÙ„Ű§Ù‹ مŰȘۧۚŰčŰ© ۧŰčۯۧۯ Ù‡Ű°Ù‡ Ű§Ù„Ű·Ű§ŰšŰčŰ© ÙƒÙ…Ű§ ŰȘفŰčل Ű§Ù„ŰąÙ†ŰŸ"
-#: ../../any.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Belarus"
+msgstr "Ű±ÙˆŰłÙŠŰ§ Ű§Ù„ŰšÙŠŰ¶Ű§ŰĄ"
+
+#: ../../partition_table.pm:1
+#, c-format
+msgid "Error writing to file %s"
+msgstr "۟۷ۣ ŰŁŰ«Ù†Ű§ŰĄ Ű§Ù„ÙƒŰȘۧۚ۩ Ű§Ù„Ù‰ Ű§Ù„Ù…Ù„Ù %s"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
msgstr ""
-"ÙŠŰŻŰčم Mandrake Linux Ű§Ù„ŰčŰŻÙŠŰŻ من Ű§Ù„Ù„ŰșۧŰȘ. ۧ۟ŰȘ۱\n"
-"Ű§Ù„Ù„ŰșۧŰȘ Ű§Ù„ŰȘي ŰȘŰ±ÙŠŰŻ ŰȘŰ«ŰšÙŠŰȘÙ‡Ű§. ŰłŰȘكون Ù‡Ű°Ù‡ مŰȘÙˆÙŰ±Ű©Ù‹ ŰčÙ†ŰŻ\n"
-"Ű§ÙƒŰȘÙ…Ű§Ù„ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ و ۧŰčۯۧ۩ ŰȘŰŽŰșيل Ű§Ù„Ù†ŰžŰ§Ù…."
+"ŰȘÙŰłŰȘŰźŰŻÙ… apmd Ù„Ù…Ű±Ű§Ù‚ŰšŰ© Ű­Ű§Ù„Ű© Ű§Ù„ŰšŰ·Ű§Ű±ÙŠŰ© و ŰȘŰłŰŹÙŠÙ„Ù‡Ű§ Űčن Ű·Ű±ÙŠÙ‚ syslog.\n"
+"يمكن ÙƒŰ°Ù„Ùƒ ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡Ű§ Ù„Ű„ŰșÙ„Ű§Ù‚ Ű§Ù„ŰŹÙ‡Ű§ŰČ ŰčÙ†ŰŻ ۶Űčف Ű§Ù„ŰšŰ·Ű§Ű±ÙŠŰ©."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose a language to use."
-msgstr "۱ۏۧۥ ۧ۟ŰȘ۱ لŰșŰ© Ű§Ù„Ű§ŰłŰȘŰźŰŻŰ§Ù…."
+msgid "Use tape to backup"
+msgstr "ۧ۳ŰȘŰźÙ… Ű§Ù„ŰŽŰ±ÙŠŰ· Ù„Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ"
-#: ../../any.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Choose the window manager to run:"
-msgstr "ۧ۟ŰȘ۱ Ù…ŰŻÙŠŰ± Ű§Ù„Ù†ÙˆŰ§ÙŰ° Ű§Ù„Ű°ÙŠ ŰłÙŠŰȘم ŰȘŰŽŰșيله:"
+msgid "The following packages are going to be installed"
+msgstr "ŰłÙŠŰȘم ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ű­ŰČم Ű§Ù„ŰȘŰ§Ù„ÙŠŰ©"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the default user:"
-msgstr "ۧ۟ŰȘ۱ Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… Ű§Ù„Ű§ÙŰȘŰ±Ű§Ű¶ÙŠ:"
+msgid "CUPS configuration"
+msgstr "CUPS ŰȘÙ‡ÙŠŰŠŰ©"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to use this feature?"
-msgstr "هل ŰȘŰ±ÙŠŰŻ ۧ۳ŰȘŰźŰŻŰ§Ù… Ù‡Ű°Ù‡ Ű§Ù„Ù…ÙŠŰČŰ©ŰŸ"
+msgid "Hong Kong"
+msgstr "Ù‡ÙˆÙ†ŰŹ ÙƒÙˆÙ†ŰŹ"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr "يمكن ۧŰčۯۧۯ ŰŹÙ‡Ű§ŰČك لŰȘŰłŰŹÙŠÙ„ Ű§Ù„ŰŻŰźÙˆÙ„ ŰąÙ„ÙŠŰ§Ù‹ Ù„Ù…ŰłŰȘŰźŰŻÙ… مŰčين."
+msgid "Not enough free space to allocate new partitions"
+msgstr "Ù„Ű§ ŰȘÙˆŰŹŰŻ Ù…ŰłŰ§Ű­Ű© ÙŰ§Ű±ŰșŰ© لŰčمل Ű§Ù„ŰȘŰŹŰČۊۧŰȘ Ű§Ù„ŰŹŰŻÙŠŰŻŰ©"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Autologin"
-msgstr "ŰŻŰźÙˆÙ„ ŰąÙ„ÙŠ"
+msgid "Moving"
+msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„Ù†Ù‚Ù„"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Icon"
-msgstr "ŰŁÙŠÙ‚ÙˆÙ†Ű©"
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
+msgstr ""
+"\n"
+"Ù†ŰŽŰ§Ű·Ű§ŰȘ Drakbackup Űčن Ű·Ű±ÙŠÙ‚ %s:\n"
+"\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Shell"
-msgstr "Ű§Ù„ŰșÙ„Ű§Ù"
+msgid "("
+msgstr "("
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Password (again)"
-msgstr "ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ± (Ű«Ű§Ù†ÙŠŰ©)"
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgstr ""
+"ŰŁÙ‡Ù„Ű§Ù‹ ŰšÙƒ في مŰčŰ§Ù„ŰŹ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰŽŰšÙƒŰ©.\n"
+"\n"
+"Ù†Ű­Ù† Űčلى ÙˆŰŽÙƒ ŰȘÙ‡ÙŠŰŠŰ© ÙˆŰ”Ù„Ű© Ű§Ù„ŰŽŰšÙƒŰ©/Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙƒ.\n"
+"ۧ۰ۧ لم ŰȘŰ±ÙŠŰŻ ۧ۳ŰȘŰźŰŻŰ§Ù… Ű§Ù„ŰȘŰ­Ù‚Ù‚ Ű§Ù„ŰąÙ„ÙŠ, Ű§Ű­Ű°Ù Ű§Ù„ŰȘŰŁŰŽÙŠŰ± من Űčلى Ű§Ù„Ű”Ù†ŰŻÙˆÙ‚.\n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "Password"
-msgstr "ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ±"
+msgid ")"
+msgstr ")"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "User name"
-msgstr "Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…"
+msgid "Lebanon"
+msgstr "Ù„ŰšÙ†Ű§Ù†"
-#: ../../any.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Real name"
-msgstr "Ű§Ù„Ű§ŰłÙ… Ű§Ù„Ű­Ù‚ÙŠÙ‚ÙŠ"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Accept user"
-msgstr "ÙˆŰ§ÙÙ‚ Űčلى Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…"
+msgid "Stop"
+msgstr "ŰȘوقف"
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Done"
-msgstr "Ű§Ù†ŰȘهى"
+msgid "Edit selected host"
+msgstr "ۭ۱۱ Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ Ű§Ù„Ù…ŰźŰȘۧ۱"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "No CD device defined!"
+msgstr "لم يŰȘم ŰȘŰčŰ±ÙŠÙ ŰŹÙ‡Ű§ŰČ Ù‚Ű±Ű” Ù…ŰŻÙ…ŰŹ!"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Bulgarian (phonetic)"
+msgstr "Ű§Ù„ŰšÙ„ŰșŰ§Ű±ÙŠŰ© (Ű”ÙˆŰȘÙŠŰ©)"
+
+#: ../../standalone/drakpxe:1
+#, c-format
+msgid "The DHCP start ip"
+msgstr "DHCP start ip"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "256 kB"
+msgstr "256 ÙƒÙŠÙ„ÙˆŰšŰ§ÙŠŰȘ"
#: ../../any.pm:1
#, c-format
+msgid "Bootloader main options"
+msgstr "ŰźÙŠŰ§Ű±Ű§ŰȘ Ù…Ű­Ù…Ù‘Ù„ Ű§Ù„Ű„Ù‚Ù„Ű§Űč Ű§Ù„Ű±ŰŠÙŠŰłÙŠŰ©"
+
+#: ../../standalone.pm:1
+#, c-format
msgid ""
-"Enter a user\n"
-"%s"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
msgstr ""
-"ŰŁŰŻŰźÙ„ Ù…ŰłŰȘŰźŰŻÙ…\n"
-"%s"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Add user"
-msgstr "Ű§Ű¶Ù Ù…ŰłŰȘŰźŰŻÙ…"
+msgid "Tape"
+msgstr "ŰŽŰ±ÙŠŰ· Ű§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This user name has already been added"
-msgstr "Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… Ù…ÙŰ¶Ű§Ù Ù…ŰłŰšÙ‚Ű§"
+msgid "Scanning network..."
+msgstr "ŰŹŰ§Ű±ÙŠ Ù…ŰłŰ­ Ű§Ù„ŰŽŰšÙƒŰ©..."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The user name is too long"
-msgstr "Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… Ű·ÙˆÙŠÙ„ ŰŹŰŻŰ§Ù‹"
+msgid ""
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
+msgstr ""
+"ŰšÙ‡Ű°Ű§ Ű§Ù„ŰźÙŠŰ§Ű± يمكنك ۧ۳ŰȘ۱ۏۧŰč ŰŁÙŠ Ù†ŰłŰźŰ© من\n"
+" ŰŻÙ„ÙŠÙ„ /etc Ű§Ù„ŰźŰ§Ű” ŰšÙƒ."
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… ÙŠŰŹŰš ŰŁÙ† ÙŠŰ­ŰȘوي ÙÙ‚Ű· Űčلى Ű§Ù„Ű­Ű±ÙˆÙ Ű§Ù„Ű”ŰșÙŠŰ±Ű©, Ű§Ù„ŰŁŰ±Ù‚Ű§Ù…, `-' و `_'"
+msgid "Malaysia"
+msgstr "Ù…Ű§Ù„ÙŠŰČÙŠŰ§"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please give a user name"
-msgstr "Ű±ŰŹŰ§ŰĄÙ‹ قم ۚۄŰč۷ۧۥ Ű§ŰłÙ… Ù…ŰłŰȘŰźŰŻÙ…"
+msgid "Swiss (French layout)"
+msgstr "Ű§Ù„ŰłÙˆÙŠŰłŰ±ÙŠŰ© (ŰȘŰ”Ù…ÙŠÙ… ÙŰ±Ù†ŰłÙŠ)"
-#: ../../any.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "This password is too simple"
-msgstr "ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ± Ù‡Ű°Ù‡ ŰšŰłÙŠŰ·Ű© ۏۯۧ"
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "ÙŰŽÙ„ mkraid (Ű±ŰšÙ…Ű§ ŰȘكون Ű­ŰČÙ…Ű© raidtools Ù…ÙÙ‚ÙˆŰŻŰ©ŰŸ)"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Webcam"
+msgstr "ÙƒŰ§Ù…ÙŠŰ±Ű§ŰȘ Ű§Ù„ÙˆÙŠŰš"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "size of the (second level) cpu cache"
+msgstr "Ű­ŰŹÙ… (Ű§Ù„Ù…ŰłŰȘوى Ű§Ù„Ű«Ű§Ù†ÙŠ)"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Soundcard"
+msgstr "ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű”ÙˆŰȘ"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
+msgstr "Ù„Ű·ŰšŰ§ŰčŰ© ملف من ۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű± ۧ۳ŰȘŰźŰŻŰ§Ù… Ű§Ù„ŰŁÙ…Ű± \"%s <file>\".\n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please try again"
-msgstr "۱ۏۧۥ ŰŹŰ§ÙˆÙ„ Ù…Ű±Ű© ŰŁŰźŰ±Ù‰"
+msgid "Level %s\n"
+msgstr "Ű§Ù„Ù…ŰłŰȘوى %s\n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The passwords do not match"
-msgstr "ÙƒÙ„Ù…Ű§ŰȘ Ű§Ù„Ù…Ű±ÙˆŰ± ŰșÙŠŰ± مŰȘŰ·Ű§ŰšÙ‚Ű©"
+msgid "Luxembourg"
+msgstr "Ù„ÙˆÙƒŰłÙ…ŰšÙˆŰ±Űș"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "(already added %s)"
-msgstr "(ŰȘم Ű§Ű¶Ű§ÙŰ© %s Ù…ŰłŰšÙ‚Ű§)"
+msgid ""
+"\n"
+" DrakBackup Daemon Report\n"
+"\n"
+"\n"
+msgstr ""
+"\n"
+" ŰȘÙ‚Ű±ÙŠŰ± Ù…Ű±Ű§Ù‚Űš DrakBackup\n"
+"\n"
+"\n"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to compilation tools"
-msgstr "Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ ŰŁŰŻÙˆŰ§ŰȘ Ű§Ù„ŰȘŰŹÙ…ÙŠŰč"
+msgid "Iran"
+msgstr "Ű§ÙŠŰ±Ű§Ù†"
-#: ../../any.pm:1
+# U+200F (RTL mark) has been inserted after "Bus" so the display
+# on screen is correctly "datadatadata :Bus", and not "Bus: datadatadata"
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "access to network tools"
-msgstr "Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ ŰŁŰŻÙˆŰ§ŰȘ Ű§Ù„ŰŽŰšÙƒŰ©"
+msgid "Bus"
+msgstr "Bus‏"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to administrative files"
-msgstr "Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ű„ŰŻŰ§Ű±Ű©"
+msgid "Iraq"
+msgstr "Ű§Ù„ŰčŰ±Ű§Ù‚"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "allow \"su\""
-msgstr "Ű§ŰłÙ…Ű­ ŰšÙ€\"su\""
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr ""
+"ŰȘم Ű§ÙŠŰŹŰ§ŰŻ ŰȘŰčۧ۱۶ في ŰčÙ†ÙˆŰ§Ù† Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ© Ű§Ù„Ù…ŰšŰŻŰŠÙŠ في Ű§Ù„Ű„Űčۯۧۯ Ű§Ù„Ű­Ű§Ù„ÙŠ لـ%s!\n"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "access to rpm tools"
-msgstr "Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ ŰŁŰŻÙˆŰ§ŰȘ rpm"
+msgid "Configuring..."
+msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„Ű„Űčۯۧۯ..."
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "access to X programs"
-msgstr "Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ ŰšŰ±Ű§Ù…ŰŹ X"
+msgid "The setup has already been done, and it's currently enabled."
+msgstr "ŰȘم Űčمل Ű§Ù„ŰȘÙ†Ű”ÙŠŰš, و هو ممكَّن Ű§Ù„ŰąÙ†."
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
msgstr ""
-"Ù‡Ű§ Ù‡Ù†Ű§ Ű§Ù„Ù…ŰŻŰźÙ„Ű§ŰȘ Ű§Ù„Ù…ŰźŰȘÙ„ÙŰ©.\n"
-"يمكنك Ű§Ű¶Ű§ÙŰ© Ù…ŰŻŰźÙ„Ű§ŰȘ ŰŁŰźŰ±Ù‰ ŰŁÙˆ ŰȘŰșÙŠÙŠŰ± Ű§Ù„Ù…ÙˆŰŹÙˆŰŻÙŠÙ†."
+"Ù„ŰŁŰșÙ„Űš ŰšŰ·Ű§Ù‚Ű§ŰȘ Ű§Ù„ŰȘÙ„ÙŰ§ŰČ Ű§Ù„Ű­ŰŻÙŠŰ«Ű©, ÙˆŰ­ŰŻŰ© bttv Ù„Ù†ÙˆŰ§Ű© Ù„ÙŠÙ†ÙƒŰł ÙŠÙ…ÙƒÙ†Ù‡Ű§ Ű§Ù„ŰȘŰ­Ù‚Ù‚ ŰąÙ„ÙŠŰ§Ù‹ من "
+"Ű§Ù„Ù…ŰčŰ§Ù…Ù„Ű§ŰȘ Ű§Ù„Ű”Ű­ÙŠŰ­Ű©.\n"
+"ۧ۰ۧ ŰȘم Ű§Ù„ŰȘŰčŰ±Ù Űčلى Ű§Ù„ŰšŰ·Ű§Ù‚Ű© ŰšŰŽÙƒÙ„ ۟ۧ۷ۊ, يمكنك Ű§ŰŻŰźŰ§Ù„ Ű§Ù„ŰȘÙˆÙ†Ű± و نوŰč Ű§Ù„ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű”Ű­ÙŠŰ­ "
+"Ù‡Ù†Ű§. ÙÙ‚Ű· ۧ۟ŰȘ۱ Ű§Ù„Ù…ŰčŰ§Ù…Ù„Ű§ŰȘ Ű§Ù„Ù…Ù†Ű§ŰłŰšŰ© Ù„ŰšŰ·Ű§Ù‚Ű© Ű§Ù„ŰŽŰ§ŰŽŰ©."
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Other OS (windows...)"
-msgstr "Ù†ŰžŰ§Ù… ۹۟۱ (Windows...)"
+msgid "Password (again)"
+msgstr "ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ± (Ű«Ű§Ù†ÙŠŰ©)"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Ù†ŰžŰ§Ù… ۹۟۱ (MacOS...)"
+msgid "Search installed fonts"
+msgstr "ۭۧۚ۫ في Ű§Ù„ŰźŰ·ÙˆŰ· Ű§Ù„Ù…Ű«ŰšŰȘŰ©"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Ù†ŰžŰ§Ù… ۹۟۱ (SunOS...)"
+msgid "Venezuela"
+msgstr "فينŰČÙˆÙŠÙ„Ű§"
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Linux"
-msgstr "Ù„ÙŠÙ†ÙƒŰł"
+msgid "IP address"
+msgstr "ŰčÙ†ÙˆŰ§Ù† IP"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Ù…Ű§ نوŰč Ű§Ù„Ù…ŰŻŰźÙ„ Ű§Ù„Ű°ÙŠ ŰȘŰ±ÙŠŰŻ Ű§Ű¶Ű§ÙŰȘÙ‡ŰŸ"
+msgid "Choose the sizes"
+msgstr "ۧ۟ŰȘ۱ Ű§Ù„ŰŁŰ­ŰŹŰ§Ù…"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This label is already used"
-msgstr "Ù‡Ű°Ù‡ Ű§Ù„ŰčÙ„Ű§Ù…Ű© Ù…ŰłŰȘŰźŰŻÙ…Ű© Ù…ŰłŰšÙ‚Ű§"
+msgid ""
+"List of data corrupted:\n"
+"\n"
+msgstr ""
+"Ù‚Ű§ŰŠÙ…Ű© ŰšŰ§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„ÙŰ§ŰłŰŻŰ©:\n"
+"\n"
-#: ../../any.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "You must specify a root partition"
-msgstr "ÙŠŰŹŰš Űčليك ŰȘŰ­ŰŻÙŠŰŻ ŰȘÙ‚ŰłÙŠÙ… ۏ۰۱"
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
+msgstr ""
+"Ű§Ù„Ù…ÙˆŰŻÙ… Ù„ŰŻÙŠÙƒ ŰșÙŠŰ± Ù…ŰŻŰčوم من Ű§Ù„Ù†ŰžŰ§Ù….\n"
+"Ű§Ù„Ù‚ Ù†ŰžŰ±Ű© Űčلى http://www.linmodems.org"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You must specify a kernel image"
-msgstr "ÙŠŰŹŰš ŰŁÙ† ŰȘŰ­ŰŻŰŻ Ű”ÙˆŰ±Ű© Ű§Ù„Ù†ÙˆŰ§Ű©"
+msgid "Choose another partition"
+msgstr "Ű„ŰźŰȘ۱ ێۧێ۩"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Empty label not allowed"
-msgstr "ŰșÙŠŰ± Ù…ŰłÙ…ÙˆŰ­ ŰšŰ§Ù„ŰčÙ„Ű§Ù…Ű§ŰȘ Ű§Ù„ÙŰ§Ű±ŰșŰ©"
+msgid "Current user"
+msgstr "Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… Ű§Ù„Ű­Ű§Ù„ÙŠ"
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Default"
-msgstr "Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠ"
+msgid "Username"
+msgstr "Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "NoVideo"
-msgstr "Ù„Ű§ ÙÙŠŰŻÙŠÙˆ"
+msgid "Left \"Windows\" key"
+msgstr "مفŰȘۭۧ \"Windows\" Ű§Ù„ŰŁÙŠŰłŰ±"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Initrd-size"
-msgstr "Ű­ŰŹÙ… Initrd"
+msgid "dhcpd Server Configuration"
+msgstr "ŰȘÙ‡ÙŠŰŠŰ© ŰźŰ§ŰŻÙ… dhcpd"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Append"
-msgstr "Ű§Ù„Ű­Ű§Ù‚"
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
+msgstr ""
+"ÙŠÙŰłŰȘŰźŰŻÙ… Ù„Ù„ŰŻÙ„ÙŠÙ„:\n"
+" يمكن ÙÙ‚Ű· Ù„Ù…Ű§Ù„Ùƒ Ù‡Ű°Ű§ Ű§Ù„ŰŻÙ„ÙŠÙ„ ŰŁÙˆ Ű§Ù„Ù…Ù„Ù Ű§Ù„ŰșŰ§Ű€Ù‡"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Label"
-msgstr "ŰčÙ†ÙˆŰ§Ù†"
+msgid "Guyana"
+msgstr "ŰșÙˆÙŠŰ§Ù†Ű§"
-#: ../../any.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Unsafe"
-msgstr "ŰșÙŠŰ± ŰąÙ…Ù†"
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr " Űčلى ŰźŰ§ŰŻÙ… Novell \"%s\", Ű§Ù„Ű·Ű§ŰšŰčŰ© \"%s\""
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Table"
-msgstr "Ű§Ù„ŰŹŰŻÙˆÙ„"
+msgid "Remove a module"
+msgstr "ۧŰČŰ§Ù„Ű© ÙˆŰ­ŰŻŰ©"
+
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Password"
+msgstr "ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ±"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
+msgstr ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Advanced Configuration"
+msgstr "Ű„Űčۯۧۯ مŰȘÙ‚ŰŻÙ…"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Scanning on your HP multi-function device"
+msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„Ù…ŰłŰ­ Űčلى ŰŹÙ‡Ű§ŰČ HP مŰȘŰčŰŻŰŻ Ű§Ù„ÙˆŰžŰ§ŰŠÙ"
#: ../../any.pm:1
#, c-format
msgid "Root"
msgstr "Ű§Ù„ŰŹŰ°Ű±"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Read-write"
-msgstr "Ù„Ù„Ù‚Ű±Ű§ŰĄŰ© و Ű§Ù„ÙƒŰȘۧۚ۩"
+msgid "Choose an existing RAID to add to"
+msgstr "ۧ۟ŰȘ۱ RAID Ù…ÙˆŰŹÙˆŰŻ Ù„Ù„Ű§Ű¶Ű§ÙŰ©"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "Ű§Ù„ŰȘŰ±ÙƒÙŠŰ© (۷۱ۧŰČ \"Q\" Ű§Ù„Ű­ŰŻÙŠŰ«)"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Video mode"
-msgstr "ÙˆŰ¶ŰčÙŠŰ© Ű§Ù„ÙÙŠŰŻÙŠÙˆ"
+msgid "Lilo message not found"
+msgstr "لم يŰȘم Ű§ÙŠŰŹŰ§ŰŻ Ű±ŰłŰ§Ù„Ű© Lilo"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Image"
-msgstr "Ű”ÙˆŰ±Ű©"
+msgid ""
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
+msgstr ""
+"ۧŰčۧۯ۩ ŰȘÙˆÙ„ÙŠŰŻ ŰąÙ„ÙŠŰ© لŰȘŰ±ÙˆÙŠŰłŰ© Ű§Ù„Ù†ÙˆŰ§Ű© في ŰŻÙ„ÙŠÙ„ /boot لـ\n"
+"/usr/include/linux/{autoconf,version}.h"
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Default OS?"
-msgstr "Ù†ŰžŰ§Ù… Ű§Ù„ŰȘŰŽŰșيل Ű§Ù„Ű§ÙŰȘŰ±Ű§Ű¶ÙŠŰŸ"
+msgid "if needed"
+msgstr "ۧ۰ۧ ۭۧŰȘŰŹŰȘه"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Enable OF Boot?"
-msgstr "ŰȘمكين Ű§Ù‚Ù„Ű§Űč OF۟"
+msgid "Restore Failed..."
+msgstr "ÙŰŽÙ„ŰȘ Ű§Ù„Ű„ŰłŰȘŰčۧۯ۩..."
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Enable CD Boot?"
-msgstr "ŰȘمكين Ű§Ù„Ű„Ù‚Ù„Ű§Űč من Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹŰŸ"
+msgid "/Autodetect _jazz drives"
+msgstr "/ŰȘŰ­Ù‚Ù‚ ŰąÙ„ÙŠ من _ŰłÙˆŰ§Ù‚Ű§ŰȘ Jazz"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Ű§Ù„ÙˆÙ‚ŰȘ Ű§Ù„ŰŁÙ‚Ű”Ù‰ Ù„Ű„Ù‚Ù„Ű§Űč Ű§Ù„Ù†ÙˆŰ§Ű©"
+msgid ""
+"Description:\n"
+"\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
+"\n"
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
+"\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
+"\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
+"\n"
+"\n"
+msgstr ""
+"Description:\n"
+"\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
+"\n"
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
+"\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
+"\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
+"\n"
+"\n"
-#: ../../any.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "Open Firmware Delay"
-msgstr "Open Firmware Delay"
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Boot device"
-msgstr "ŰŹÙ‡Ű§ŰČ Ű§Ù„Ű„Ù‚Ù„Ű§Űč"
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
+msgstr ""
+"Ű§Ù„Ű„Ű­ŰŻŰ§Ű«ÙŠ Ű§Ù„ŰłÙŠÙ†ÙŠ Ù„Ù„Ű±ÙƒÙ† Ű§Ù„ŰŁÙŠŰłŰ± Ű§Ù„ŰŁŰčلى\n"
+"Ù„ŰŽŰ±ÙŠŰ· Ű§Ù„ŰȘÙ‚ŰŻÙ…"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Init Message"
-msgstr "Ű±ŰłŰ§Ù„Ű© Init"
+msgid "Current interface configuration"
+msgstr "ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ÙˆŰ§ŰŹÙ‡Ű© Ű§Ù„Ű­Ű§Ù„ÙŠŰ©"
-#: ../../any.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Bootloader to use"
-msgstr "Ù…Ű­Ù…Ù‘Ù„ Ű§Ù„Ű„Ù‚Ù„Ű§Űč Ű§Ù„Ù…ÙŰłŰȘŰźŰŻÙ…"
+msgid "LPD - Line Printer Daemon"
+msgstr "LPD - Line Printer Daemon"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Bootloader main options"
-msgstr "ŰźÙŠŰ§Ű±Ű§ŰȘ Ù…Ű­Ù…Ù‘Ù„ Ű§Ù„Ű„Ù‚Ù„Ű§Űč Ű§Ù„Ű±ŰŠÙŠŰłÙŠŰ©"
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
+msgstr ""
+"\n"
+"ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ù„ŰŻÙŠÙƒ ŰšŰ·Ű§Ù‚Ű© ISA, ÙŰ„Ù† Ű§Ù„Ù‚ÙŠÙ… Ű§Ù„ŰȘي ŰłŰȘŰč۱۶ Űčلى Ű§Ù„ŰŽŰ§ŰŽŰ© Ű§Ù„ŰȘŰ§Ù„ÙŠŰ© ÙŠŰŹŰš ŰŁÙ† ŰȘكون "
+"Ű”Ű­ÙŠŰ­Ű©.\n"
+"\n"
+"ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ù„ŰŻÙŠÙƒ ŰšŰ·Ű§Ù‚Ű© PCMCIA, ÙŠŰŹŰš Űčليك ŰŁÙ† ŰȘŰčŰ±Ù قيم \"irq\" و \"io\" Ű§Ù„ŰźŰ§Ű”Ű© "
+"ŰšŰšŰ·Ű§Ù‚ŰȘك.\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "ŰźÙŠŰ§Ű± ``ŰȘŰŽŰŻÙŠŰŻ ŰźÙŠŰ§Ű±Ű§ŰȘ ۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű±`` ŰšŰŻÙˆÙ† Ù‚Ű§ŰŠŰŻŰ© من ŰŻÙˆÙ† ÙƒÙ„Ù…Ű© Ù…Ű±ÙˆŰ±"
+msgid "Do not print any test page"
+msgstr "Ù„Ű§ ŰȘŰ·ŰšŰč ŰŁÙŠ Ű”ÙŰ­Ű§ŰȘ ۧ۟ŰȘŰšŰ§Ű±ÙŠŰ©"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Give the ram size in MB"
-msgstr "Ű§ÙƒŰȘŰš Ű­ŰŹÙ… Ű§Ù„Ű°Ű§ÙƒŰ±Ű© ŰšŰ§Ù„Ù…ÙŠŰșŰ§ŰšŰ§ÙŠŰȘ"
+msgid "Gurmukhi"
+msgstr "ŰșÙˆŰ±Ù…ÙˆÙƒÙ‡ÙŠ"
#: ../../any.pm:1
#, c-format
-msgid "Enable multiple profiles"
-msgstr "ŰȘمكين Ű§Ù„ŰȘŰŽÙƒÙŠÙ„Ű§ŰȘ Ű§Ù„Ù…ŰȘŰčŰŻŰŻŰ©"
+msgid "Force No APIC"
+msgstr "ۧۏۚۧ۱ Űčلى ŰčŰŻÙ… ۧ۳ŰȘŰźŰŻŰ§Ù… APIC"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Ű­ŰŹÙ… Ű§Ù„Ű°Ű§ÙƒŰ±Ű© Ű§Ù„ŰŻÙ‚ÙŠÙ‚ ŰčÙ†ŰŻ Ű§Ù„Ű­Ű§ŰŹŰ© )ŰȘم Ű§ÙŠŰŹŰ§ŰŻ %d ميŰșŰ§ŰšŰ§ÙŠŰȘ("
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr "ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±Ùˆ Ù‡Ű°Ù‡ Ù‚Ű”ÙŠŰ±Ű© ŰŹŰŻŰ§Ù‹ (ÙŠŰŹŰš ŰŁÙ† ŰȘكون %d Ű±Ù…ÙˆŰČ Űčلى Ű§Ù„ŰŁÙ‚Ù„)"
-#: ../../any.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "قم ŰšŰȘÙ†ŰžÙŠÙ /tmp ŰčÙ†ŰŻ كل Ű„Ù‚Ù„Ű§Űč"
+msgid "[keyboard]"
+msgstr "[keyboard]"
-#: ../../any.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Create a bootdisk"
-msgstr "ŰŁÙ†ŰŽŰŠ Ù‚Ű±Ű” Ű„Ù‚Ù„Ű§Űč"
+msgid "FTP proxy"
+msgstr "ŰšŰ±ÙˆÙƒŰłÙŠ FTP"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "restrict"
-msgstr "ŰȘŰŽŰŻÙŠŰŻ"
+msgid "Install List"
+msgstr "Ű«ŰšÙ‘ŰȘ Ű§Ù„Ù‚Ű§ŰŠÙ…Ű©"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restrict command line options"
-msgstr "ŰȘŰŽŰŻÙŠŰŻ ŰźÙŠŰ§Ű±Ű§ŰȘ ۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű±"
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr ""
+"ŰșÙŠÙ‘Ű±\n"
+"Ù…ŰłŰ§Ű± Ű§Ù„Ű„ŰłŰȘŰčۧۯ۩"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Force No APIC"
-msgstr "ۧۏۚۧ۱ Űčلى ŰčŰŻÙ… ۧ۳ŰȘŰźŰŻŰ§Ù… APIC"
+msgid "Show only for the selected day"
+msgstr "Ű„Űč۱۶ ŰłŰŹÙ„Ű§ŰȘ Ű§Ù„ÙŠÙˆÙ… Ű§Ù„Ù…ŰźŰȘۧ۱ ÙÙ‚Ű·"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Enable ACPI"
-msgstr "ŰȘمكين ACPI"
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
+"\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
+"\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
+"\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
+"\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Delay before booting default image"
-msgstr "ŰȘوقيŰȘ Ù…Ű§ Ù‚ŰšÙ„ Ű§Ù‚Ù„Ű§Űč Ű§Ù„Ű”ÙˆŰ±Ű© Ű§Ù„Ű§ÙŰȘŰ±Ű§Ű¶ÙŠŰ©"
+msgid "512 kB"
+msgstr "512 ÙƒÙŠÙ„ÙˆŰšŰ§ÙŠŰȘ"
-#: ../../any.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "compact"
-msgstr "Ù…ŰŻÙ…ŰŹ"
+msgid "Logs"
+msgstr "Ű§Ù„ŰłŰŹÙ„Ű§ŰȘ"
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Compact"
-msgstr "Ù…ŰŻÙ…ŰŹ"
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr "(Ù…Ù„Ű­ÙˆŰžŰ©: Ű§Ù„Ù…Ù†Ű§ÙŰ° Ű§Ù„Ù…ŰȘÙˆŰ§ŰČÙŠŰ© Ù„Ű§ يمكن Ű§Ù„ŰȘŰ­Ù‚Ù‚ Ù…Ù†Ù‡Ű§ ŰąÙ„ÙŠŰ§Ù‹)"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bootloader installation"
-msgstr "ŰȘŰ«ŰšÙŠŰȘ Ù…Ű­Ù…Ù„ Ű§Ù„Ű„Ù‚Ù„Ű§Űč"
+msgid "<control>N"
+msgstr "<control>N"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "First sector of boot partition"
-msgstr "Ű§Ù„Ù‚Ű·Ű§Űč Ű§ÙˆÙ„ من ŰȘŰŹŰČŰŠŰ© Ű§Ù„Ű„Ù‚Ù„Ű§Űč"
+msgid "What kind of card do you have?"
+msgstr "Ù…Ű§ هو نوŰč Ű§Ù„ŰšŰ·Ű§Ù‚Ű© Ù„ŰŻÙŠÙƒŰŸ"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Ű§Ù„Ù‚Ű·Ű§Űč Ű§Ù„ŰŁÙˆÙ„ من Ű§Ù„Ù‚Ű±Ű” (MBR)"
+msgid "<control>O"
+msgstr "<control>O"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "ŰŁÙŠÙ† ŰȘŰ±ÙŠŰŻ ŰȘŰ«ŰšÙŠŰȘ Ù…Ű­Ù…Ù‘Ù„ Ű§Ù„Ű„Ù‚Ù„Ű§Űč۟"
+msgid "Security"
+msgstr "Ű§Ù„ŰŁÙ…Ù†"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "LILO/grub Installation"
-msgstr "ŰȘŰ«ŰšÙŠŰȘ LILO/grub"
+msgid ""
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
+msgstr ""
+"يمكنك ÙƒŰ°Ù„Ùƒ ۧ۳ŰȘŰźŰŻŰ§Ù… Ű§Ù„ŰšŰ±Ù†Ű§Ù…ŰŹ Ű§Ù„Ű±ŰłÙˆÙ…ÙŠ \"xpdq\" لŰȘŰčيين Ű§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ و Ű§Ù„ŰȘŰčŰ§Ù…Ù„ مŰč "
+"ÙˆŰžŰ§ŰŠÙ Ű§Ù„Ű·ŰšŰ§ŰčŰ©.\n"
+"ۧ۰ۧ كنŰȘ ŰȘŰłŰȘŰčÙ…Űš ÙƒÙŠŰŻÙŠ ÙƒŰšÙŠŰŠŰ© ۳۷ۭ مكŰȘŰš ÙÙ„ŰŻÙŠÙƒ ŰŁÙŠÙ‚ÙˆÙ†Ű© \"Ù„Ù„Ű·ÙˆŰ§Ű±ŰŠ\", Ű§ŰłÙ…Ù‡Ű§ \"STOP "
+"Printer!\", ŰȘقوم ŰšŰ„ÙŠÙ‚Ű§Ù كل ÙˆŰžŰ§ŰŠÙ Ű§Ù„Ű·ŰšŰ§ŰčŰ© ÙÙˆŰ±Ű§Ù‹ ŰčÙ†ŰŻ Ű§Ù„Ù†Ù‚Ű± ŰčÙ„ÙŠÙ‡Ű§. Ù‡Ű°Ű§ Ű§Ù„Ù…Ű«Ű§Ù„ "
+"Ù…ÙÙŠŰŻ Ù„Ù„Ű­Ű§Ù„Ű§ŰȘ Ű§Ù„ŰȘي ÙŠŰ­Ű”Ù„ ÙÙŠÙ‡Ű§ ŰȘŰč۫۱ في ۧ۳ŰȘŰźŰŻŰ§Ù… Ű§Ù„ÙˆŰ±Ù‚.\n"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "SILO Installation"
-msgstr "ŰȘŰ«ŰšÙŠŰȘ SILO"
+msgid "<control>Q"
+msgstr "<control>Q"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Skip"
-msgstr "ŰȘŰźŰ·ÙŠ"
+msgid "Unknown"
+msgstr "ŰșÙŠŰ± مŰčŰ±ÙˆÙ"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "On Floppy"
-msgstr "Űčلى Ù‚Ű±Ű” Ù…Ű±Ù†"
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr "Ù‡Ű°Ű§ Ű§Ù„ŰźŰ§ŰŻÙ… Ù…ÙˆŰŹÙˆŰŻ في Ű§Ù„Ù‚Ű§ŰŠÙ…Ű© Ù…ŰłŰšÙ‚Ű§Ù‹, Ù„Ű§ يمكن Ű§Ű¶Ű§ÙŰȘه Ù…Ű±Ű© ŰŁŰźŰ±Ù‰.\n"
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "First sector of the root partition"
-msgstr "Ű§Ù„Ù‚Ű·Ű§Űč Ű§Ù„ŰŁÙˆÙ„ من Ű§Ù„ŰȘŰŹŰČŰŠŰ© Ű§Ù„ŰŹŰ°Ű±ÙŠŰ©"
+msgid "Network Configuration"
+msgstr "ۧŰčۯۧۯۧŰȘ Ű§Ù„ŰŽŰšÙƒŰ©"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>S"
+msgstr "<control>S"
+
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
msgstr ""
-"Ù„Ù‚ŰŻ Ù‚Ű±Ű±ŰȘ ŰȘŰ«ŰšÙŠŰȘ Ù…Ű­Ù…Ù‘Ù„ Ű§Ù„Ű„Ù‚Ù„Ű§Űč Űčلى ŰȘŰŹŰČŰŠŰ©.\n"
-"Ù‡Ű°Ű§ يŰčني ŰŁÙ†Ù‡ Ù„ŰŻÙŠÙƒ Ù…Ű­Ù…Ù‘Ù„ Ű„Ù‚Ù„Ű§Űč Űčلى Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű°ÙŠ ŰȘŰłŰȘŰźŰŻÙ…Ù‡ Ù„Ù„Ű„Ù‚Ù„Ű§Űč (Ù…Ű«Ű§Ù„: System "
-"Commander).\n"
-"\n"
-"Űčلى ŰŁÙŠ Ù‚Ű±Ű” ŰȘقوم ŰšŰ§Ù„Ű„Ù‚Ù„Ű§Űč۟"
+"ŰšŰ±ÙˆŰȘوكول Ù„ŰšÙ‚ÙŠŰ© Ű§Ù„ŰčŰ§Ù„Ù…\n"
+"Ù„Ű§ D-Channel (ŰźŰ·ÙˆŰ· Ù…Ű€ŰŹŰ±Ű©)"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Creating bootdisk..."
-msgstr "Ű§Ù†ŰŽŰ§ŰĄ Ù‚Ű±Ű” Ű§Ù„Ű„Ù‚Ù„Ű§Űč..."
+msgid "Option %s must be a number!"
+msgstr "Ű§Ù„ŰźÙŠŰ§Ű± %s ÙŠŰŹŰš ŰŁÙ† يكون Ű±Ù‚Ù…Ű§Ù‹!"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
#, c-format
-msgid "Insert a floppy in %s"
-msgstr "ŰŁŰŻŰźÙ„ Ù‚Ű±Ű” Ù…Ű±Ù† في %s"
+msgid "Notice"
+msgstr "Ù…Ù„Ű§Ű­ŰžŰ©"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "ۧ۟ŰȘ۱ ŰłÙˆŰ§Ù‚Ű© Ű§Ù„ŰŁÙ‚Ű±Ű§Ű” Ű§Ù„Ù…Ű±Ù†Ű© Ű§Ù„ŰȘي ŰȘŰ±ÙŠŰŻ ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡Ű§ لŰčمل Ù‚Ű±Ű” Ű§Ù„Ű„Ù‚Ù„Ű§Űč"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Second floppy drive"
-msgstr "ŰłÙˆŰ§Ù‚Ű© Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…Ű±Ù† Ű§Ù„Ű«Ű§Ù†ÙŠŰ©"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "First floppy drive"
-msgstr "ŰłÙˆŰ§Ù‚Ű© Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…Ű±Ù† Ű§Ù„ŰŁÙˆÙ„Ù‰"
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr "لم ŰȘقم ŰšŰȘÙ‡ÙŠŰŠŰ© ŰźŰ§ŰŻÙ… X. هل ŰŁÙ†ŰȘ مŰȘŰŁÙƒŰŻ ŰŁÙ†Ùƒ ŰȘŰ±ÙŠŰŻ Ű°Ù„ÙƒŰŸ"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "ŰąŰłÙ , Ù„Ű§ Ù…ŰŻŰźÙ„ Ù…Ű±Ù† مŰȘۭۧ"
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
+"ۧŰčۯۧۯ Ű§Ù„Ű·Ű§ŰšŰčŰ© ŰłÙŠŰčمل ŰšŰŽÙƒÙ„ ŰąÙ„ÙŠ. ۧ۰ۧ لم يŰȘم Ű§ÙƒŰȘŰŽŰ§Ù ۷ۧۚŰčŰȘك ŰšŰ§Ù„ŰŽÙƒÙ„ Ű§Ù„Ű”Ű­ÙŠŰ­ ŰŁÙˆ ۧ۰ۧ "
+"كنŰȘ ŰȘÙŰ¶Ù„ ۧŰčۯۧۯ Ù…ŰźŰ”Ű” ŰŽŰșّل \"ŰȘÙ‡ÙŠŰŠŰ© ÙŠŰŻÙˆÙŠŰ©\"."
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "What type of partitioning?"
+msgstr "ŰŁÙŠ نوŰč من Ű§Ù„ŰȘŰŹŰČŰŠŰ©ŰŸ"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
+"file list sent by FTP: %s\n"
+" "
msgstr ""
-"Ù‚Ű±Ű” Ű§Ù‚Ù„Ű§Űč Ù…ŰźŰ”Ű” ÙŠÙˆÙŰ± Ű·Ű±ÙŠÙ‚Ű© Ù„Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ Ù†ŰžŰ§Ù… Ù„ÙŠÙ†ÙƒŰł Ű§Ù„ŰźŰ§Ű” ŰšÙƒ ŰŻÙˆÙ†\n"
-"Ű§Ù„Ű„ŰčŰȘÙ…Ű§ŰŻ Űčلى Ù…Ű­Ù…Ù‘Ù„ Ű§Ù„Ű„Ù‚Ù„Ű§Űč Ű§Ù„Ű„ŰčŰȘÙŠŰ§ŰŻÙŠ. Ù‡Ű°Ű§ Ù…ÙÙŠŰŻ ۧ۰ۧ لم ŰȘكن ŰȘŰ±ÙŠŰŻ ŰȘŰ«ŰšÙŠŰȘ\n"
-"LILO (ŰŁÙˆ grub) Űčلى Ù†ŰžŰ§Ù…Ùƒ, ŰŁÙˆ ۧ۰ۧ ŰŁŰČŰ§Ù„ Ù†ŰžŰ§Ù… ŰȘŰŽŰșيل ۹۟۱ LILO, ŰŁÙˆ ۧ۰ۧ لم يŰȘÙˆŰ§ÙÙ‚ "
-"LILO\n"
-"مŰč ŰȘÙ‡ÙŠŰŠŰ© Ù†ŰžŰ§Ù…Ùƒ. يمكن ÙƒŰ°Ù„Ùƒ ۧ۳ŰȘŰźŰŻŰ§Ù… Ù‚Ű±Ű” Ű§Ù‚Ù„Ű§Űč Ù…ŰźŰ”Ű” مŰč\n"
-"Mandrake rescue image, Ù…Ù…Ű§ ÙŠŰŹŰčل Ű§Ù„Ù…ŰčŰ§Ù„ŰŹŰ© من Ű§Ù†Ù‡ÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„Ù†ŰžŰ§Ù… Ű§Ù„ŰźŰ·ÙŠŰ±Ű© ŰŁÙƒŰ«Ű± "
-"ŰłÙ‡ÙˆÙ„Ű©.\n"
-"هل ŰȘŰ±ÙŠŰŻ Űčمل Ù‚Ű±Ű” Ű§Ù‚Ù„Ű§Űč Ù„Ù†ŰžŰ§Ù…ÙƒŰŸ\n"
-"%s"
+"Ù‚Ű§ŰŠÙ…Ű© Ű§Ù„Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ù…Ű±ŰłÙ„Ű© من FTP: %s\n"
+" "
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
+msgid "Interface"
+msgstr "Ű§Ù„ÙˆŰ§ŰŹÙ‡Ű©"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
+"Options Description:\n"
+"\n"
+" - Backup System Files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
"\n"
+" - Backup User Files: \n"
+"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
+"\n"
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane. To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
msgstr ""
+"options description:\n"
+"\n"
+" - Backup system files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Backup User files: \n"
+"\n"
+"\tThis option allows you select all users that you want \n"
+"\tto backup.\n"
+"\tTo preserve disk space, it is recommended that you \n"
+"\tdo not include the web browser's cache.\n"
+"\n"
+" - Backup Other files: \n"
+"\n"
+"\tThis option allows you to add more data to save.\n"
+"\tWith the other backup it's not possible at the \n"
+"\tmoment to select incremental backup.\t\t\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful \n"
+"\toption for backup. This option allows you \n"
+"\tto backup all your data the first time, and \n"
+"\tonly the changed data afterward.\n"
+"\tThen you will be able, during the restore\n"
+"\tstep, to restore your data from a specified\n"
+"\tdate.\n"
+"\tIf you have not selected this option all\n"
+"\told backups are deleted before each backup. \n"
"\n"
"\n"
-"(ŰȘŰ­Ű°ÙŠŰ±! ŰŁÙ†ŰȘ ŰȘŰłŰȘŰźŰŻÙ… XFS للŰȘŰŹŰČŰŠŰ© Ű§Ù„ŰŹŰ°Ű±ÙŠŰ©,\n"
-"Űčمل Ù‚Ű±Ű” Ù…Ű±Ù† Ù„Ù„Ű„Ù‚Ù„Ű§Űč Ù‚ŰŻ ÙŠÙŰŽÙ„ Űčلى Ű§Ù„ŰŁŰ±ŰŹŰ­,\n"
-"Ù„ŰŁÙ† XFS ÙŠŰ­ŰȘۧۏ Ű§Ù„Ù‰ Ù…ŰŽŰșل ÙƒŰšÙŠŰ± Ű§Ù„Ű­ŰŹÙ…)."
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
msgstr ""
-"Ù‚Ű±Ű” Ű§Ù‚Ù„Ű§Űč Ù…ŰźŰ”Ű” ÙŠÙˆÙŰ± Ű·Ű±ÙŠÙ‚Ű© Ù„Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ Ù†ŰžŰ§Ù… Ù„ÙŠÙ†ÙƒŰł Ű§Ù„ŰźŰ§Ű” ŰšÙƒ ŰŻÙˆÙ†\n"
-"Ű§Ù„Ű„ŰčŰȘÙ…Ű§ŰŻ Űčلى Ù…Ű­Ù…Ù‘Ù„ Ű§Ù„Ű„Ù‚Ù„Ű§Űč Ű§Ù„Ű„ŰčŰȘÙŠŰ§ŰŻÙŠ. Ù‡Ű°Ű§ Ù…ÙÙŠŰŻ ۧ۰ۧ لم ŰȘكن ŰȘŰ±ÙŠŰŻ ŰȘŰ«ŰšÙŠŰȘ\n"
-"SILO Űčلى Ù†ŰžŰ§Ù…Ùƒ, ŰŁÙˆ ۧ۰ۧ ŰŁŰČŰ§Ù„ Ù†ŰžŰ§Ù… ŰȘŰŽŰșيل ۹۟۱ LILO, ŰŁÙˆ ۧ۰ۧ لم يŰȘÙˆŰ§ÙÙ‚ SILO\n"
-"مŰč ŰȘÙ‡ÙŠŰŠŰ© Ù†ŰžŰ§Ù…Ùƒ. يمكن ÙƒŰ°Ù„Ùƒ ۧ۳ŰȘŰźŰŻŰ§Ù… Ù‚Ű±Ű” Ű§Ù‚Ù„Ű§Űč Ù…ŰźŰ”Ű” مŰč\n"
-"Mandrake rescue image, Ù…Ù…Ű§ ÙŠŰŹŰčل Ű§Ù„Ù…ŰčŰ§Ù„ŰŹŰ© من Ű§Ù†Ù‡ÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„Ù†ŰžŰ§Ù… Ű§Ù„ŰźŰ·ÙŠŰ±Ű© ŰŁÙƒŰ«Ű± "
-"ŰłÙ‡ÙˆÙ„Ű©.\n"
-"ۧ۰ۧ كنŰȘ ŰȘŰ±ÙŠŰŻ Ű§Ù†ŰŽŰ§ŰĄ Ù‚Ű±Ű” Ű§Ù‚Ù„Ű§Űč Ù„Ù†ŰžŰ§Ù…Ùƒ, ŰŁŰŻŰźÙ„ Ù‚Ű±Ű” Ù…Ű±Ù† في Ű§Ù„ŰłÙˆŰ§Ù‚Ű©\n"
-"Ű§Ù„ŰŁÙˆÙ„Ù‰ و ۧ۶ŰșŰ· \"Ù…ÙˆŰ§ÙÙ‚\"."
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
+"\n"
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
-#: ../../bootloader.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "يمكنك ŰȘŰ«ŰšÙŠŰȘ Ù…Ű­Ù…Ù‘Ù„ Ű§Ù„Ű„Ù‚Ù„Ű§Űč Űčلى Ű§Ù„ŰȘŰŹŰČŰŠŰ© %s\n"
+msgid "comma separated strings"
+msgstr "Ű­Ű±ÙÙŠŰ§ŰȘ Ù…ÙŰ”ÙˆÙ„Ű© ŰšŰ§Ù„ÙŰ§Ű”Ù„Ű©"
-#: ../../bootloader.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "not enough room in /boot"
-msgstr "Ù„Ű§ ŰȘÙˆŰŹŰŻ Ù…ŰłŰ§Ű­Ùˆ ÙƒŰ§ÙÙŠŰ© في /boot"
+msgid "These are the machines from which the scanners should be used:"
+msgstr "ŰȘÙˆŰŹŰŻ Ù…Ű§ÙƒÙŠÙ†Ű§ŰȘ يمكن ۧ۳ŰȘŰźŰŻŰ§Ù… Ű§Ù„Ù…Ű§ŰłŰ­Ű§ŰȘ Ű§Ù„Ű¶ÙˆŰŠÙŠŰ© Ù…Ù†Ù‡Ű§:"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "The highlighted entry will be booted automatically in %d seconds."
+msgid "Messages"
+msgstr "Ű§Ù„Ű±ŰłŰ§ŰŠÙ„"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "commands before booting, or 'c' for a command-line."
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr "ŰșÙŠŰ± مŰčŰ±ÙˆÙ|CPH06X (bt878) [Ù…Ű”Ù†Űčون ÙƒŰ«ÙŠŰ±ÙˆÙ†]"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Press enter to boot the selected OS, 'e' to edit the"
+msgid "POP and IMAP Server"
+msgstr "ŰźŰ§ŰŻÙ… POP و IMAP"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use the %c and %c keys for selecting which entry is highlighted."
+msgid "Mexico"
+msgstr "Ű§Ù„Ù…ÙƒŰłÙŠÙƒ"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welcome to GRUB the operating system chooser!"
+msgid "Model stepping"
+msgstr "Model stepping"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Rwanda"
+msgstr "Ű±ÙˆŰ§Ù†ŰŻŰ§"
-#: ../../bootloader.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Grub"
-msgstr "Grub"
+msgid "Do you have any %s interfaces?"
+msgstr "هل Ù„ŰŻÙŠÙƒ ŰŁÙŠ ÙˆŰ§ŰŹÙ‡Ű§ŰȘ %s۟"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with text menu"
-msgstr "LILO مŰč Ù‚Ű§ŰŠÙ…Ű© Ù†Ű”ÙŠŰ©"
+msgid "Switzerland"
+msgstr "Ű§Ù„ŰłÙˆÙŠŰłŰ±ÙŠŰ©"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO مŰč Ù‚Ű§ŰŠÙ…Ű© Ű±ŰłÙˆÙ…ÙŠŰ©"
+msgid "Brunei Darussalam"
+msgstr "ŰłÙ„Ű·Ù†Ű© ŰšŰ±ÙˆÙ†Ű§ÙŠ"
-#: ../../bootloader.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Remote lpd Printer Options"
+msgstr "ŰźÙŠŰ§Ű±Ű§ŰȘ ۷ۧۚŰčŰ© lpd Ű§Ù„ŰšŰčÙŠŰŻ"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
"\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
msgstr ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-#: ../../common.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "consolehelper missing"
-msgstr "consolehelper missing"
+msgid "Configure Internet Access..."
+msgstr "Ű„Űčۯۧۯ Ű§Ù„ŰŻŰźÙˆÙ„ Ű§Ù„Ù‰ Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ..."
-#: ../../common.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "kdesu missing"
-msgstr "kdesu missing"
+msgid "Norway"
+msgstr "Ű§Ù„Ù†Ű±ÙˆÙŠŰŹ"
-#: ../../common.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "ŰłŰȘكون Ù„Ù‚Ű·Ű§ŰȘ Ű§Ù„ŰŽŰ§ŰŽŰ© Ù…ÙˆŰŹÙˆŰŻŰ© ŰšŰčŰŻ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ في %s"
+msgid "Danish"
+msgstr "Ű§Ù„ŰŻÙ†Ù…Ű§Ű±ÙƒÙŠŰ©"
-#: ../../common.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "Ù„Ű§ يمكنني Űșمل Ù„Ù‚Ű·Ű§ŰȘ Ù„Ù„ŰŽŰ§ŰŽŰ© Ù‚ŰšÙ„ Ű§Ù„ŰȘŰŹŰČŰŠŰ©"
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
+msgstr ""
+"ŰȘقوم ŰšŰȘŰŽŰșيل مفŰȘۭۧ numlock ŰąÙ„ÙŠŰ§Ù‹ في ۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű±\n"
+"و XFree ŰčÙ†ŰŻ Ű§Ù„Ű„Ù‚Ù„Ű§Űč."
-#: ../../common.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "%d seconds"
-msgstr "%d Ű«ÙˆŰ§Ù†"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+"ÙŰ¶Ù„Ű§Ù‹ ŰŁŰŻŰźÙ„ ŰȘÙ‡ÙŠŰŠŰ© IP Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙ‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű©.\n"
+"كل Ù…Ű§ŰŻŰ© ÙŠŰŹŰš Ű§ŰŻŰźŰ§Ù„Ù‡Ű§ كŰčÙ†ÙˆŰ§Ù† IP ŰšŰŽÙƒÙ„ Ù…Ù†Ù‚ÙˆŰ·\n"
+"(Ù…Ű«Ù„Ű§Ù‹, 1.2.3.4)."
-#: ../../common.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "1 minute"
-msgstr "ŰŻÙ‚ÙŠÙ‚Ű© ÙˆŰ§Ű­ŰŻŰ©"
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
+msgstr ""
+"ŰȘŰ«ŰšÙŠŰȘ Mandrake Linux موŰČŰč Űčلى Ű§Ù„ŰčŰŻÙŠŰŻ من Ű§Ù„ŰŁÙ‚Ű±Ű§Ű”. DrakX\n"
+"يŰčلم ۄ۰ۧ ÙƒŰ§Ù†ŰȘ Ű­ŰČÙ…Ű© Ù…Ű§ في Ù‚Ű±Ű” ۹۟۱ و ŰłÙŠŰźŰ±ŰŹ Ű§Ù„Ù‚Ű±Ű”\n"
+"Ű§Ù„Ű­Ű§Ù„ÙŠ و ŰłÙŠŰ·Ù„Űš منك ŰŁÙ† ŰȘŰŻŰźÙ„ Ù‚Ű±Ű”Ű§Ù‹ Ù…ŰźŰȘÙ„ÙŰ§ ÙƒÙ…Ű§ هو Ù…Ű·Ù„ÙˆŰš."
-#: ../../common.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "%d minutes"
-msgstr "%d ŰŻÙ‚Ű§ŰŠÙ‚"
+msgid "Processors"
+msgstr "Ű§Ù„Ù…ŰčŰ§Ù„ŰŹŰ§ŰȘ"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "TB"
-msgstr "ŰȘÙŠŰ±Ű§ŰšŰ§ÙŠŰȘ"
+msgid "Bulgaria"
+msgstr "ŰšÙ„ŰșŰ§Ű±ÙŠŰ§"
-#: ../../common.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "GB"
-msgstr "ŰșيŰșŰ§ŰšŰ§ÙŠŰȘ"
+msgid "No NIC selected!"
+msgstr "لم يŰȘم ۧ۟ŰȘÙŠŰ§Ű± NIC!"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "MB"
-msgstr "ميŰșŰ§ŰšŰ§ÙŠŰȘ"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr "ŰŹŰČ۱ ŰłÙŰ§Ù„ŰšŰ§Ű±ŰŻ و ŰŹŰ§Ù† Ù…Ű§ÙŠÙ†"
-#: ../../common.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "KB"
-msgstr "ÙƒÙŠÙ„ÙˆŰšŰ§ÙŠŰȘ"
+msgid ""
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
+msgstr ""
+"ŰžÙ‡Ű±ŰȘ Ù…ŰŽŰ§ÙƒÙ„ ŰŁŰ«Ù†Ű§ŰĄ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ.\n"
+"ۧ۟ŰȘۚ۱ Ű§Ù„ÙˆŰ”Ù„Ű© ۚۧ۳ŰȘŰźŰŻŰ§Ù… net_monitor ŰŁÙˆ mcc. ۧ۰ۧ لم ŰȘŰčمل Ű§Ù„ÙˆŰ”Ù„Ű©, ÙÙ‚ŰŻ ŰȘŰ±ÙŠŰŻ ۧŰčۧۯ۩ "
+"Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ©."
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "United States"
-msgstr "Ű§Ù„ÙˆÙ„Ű§ÙŠŰ§ŰȘ Ű§Ù„Ù…ŰȘŰ­ŰŻŰ©"
+msgid "partition %s is now known as %s"
+msgstr "Ű§Ù„ŰȘŰŹŰČŰŠŰ© %s مŰčŰ±ÙˆÙŰ© Ű§Ù„ŰąÙ† ŰšŰ§Ù„Ű„ŰłÙ… %s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Austria"
-msgstr "Ű§Ù„Ù†Ù…ŰłŰ§"
+msgid "Backup Other files..."
+msgstr "Ű§Ù†ŰłŰź Ù…Ù„ÙŰ§ŰȘ ŰŁŰźŰ±Ù‰..."
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Italy"
-msgstr "Ű„ÙŠŰ·Ű§Ù„ÙŠŰ§"
+msgid "SMB server IP"
+msgstr "IP ŰźŰ§ŰŻÙ… SMB"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Netherlands"
-msgstr "Ù‡ÙˆÙ„Ù†ŰŻŰ§"
+msgid "Congo (Kinshasa)"
+msgstr "Ű§Ù„ÙƒÙˆÙ†Űșو ÙƒÙŠÙ†ŰŽŰ§ŰłŰ§"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sweden"
-msgstr "Ű§Ù„ŰłÙˆÙŠŰŻ"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "ŰŹŰŻÙˆÙ„ ۧŰȘŰȘÙ‚ŰłÙŠÙ… Ù„Ù„Ù‚Ű±Ű” %s ŰłÙŠŰȘم كŰȘۧۚŰȘه Ű§Ù„Ù‰ Ű§Ù„Ù‚Ű±Ű”!"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Norway"
-msgstr "Ű§Ù„Ù†Ű±ÙˆÙŠŰŹ"
+msgid "Installing HPOJ package..."
+msgstr "ŰŹŰ§Ű±ÙŠ ŰȘÙ‡ÙŠŰŠŰ© Ű­ŰČÙ…Ű© HPOJ..."
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Greece"
-msgstr "Ű§Ù„ÙŠÙˆÙ†Ű§Ù†"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr ""
+"Ù‚Ű±Ű” Ű§Ù‚Ù„Ű§Űč Ù…ŰźŰ”Ű” ÙŠÙˆÙŰ± Ű·Ű±ÙŠÙ‚Ű© Ù„Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ Ù†ŰžŰ§Ù… Ù„ÙŠÙ†ÙƒŰł Ű§Ù„ŰźŰ§Ű” ŰšÙƒ ŰŻÙˆÙ†\n"
+"Ű§Ù„Ű„ŰčŰȘÙ…Ű§ŰŻ Űčلى Ù…Ű­Ù…Ù‘Ù„ Ű§Ù„Ű„Ù‚Ù„Ű§Űč Ű§Ù„Ű„ŰčŰȘÙŠŰ§ŰŻÙŠ. Ù‡Ű°Ű§ Ù…ÙÙŠŰŻ ۧ۰ۧ لم ŰȘكن ŰȘŰ±ÙŠŰŻ ŰȘŰ«ŰšÙŠŰȘ\n"
+"LILO (ŰŁÙˆ grub) Űčلى Ù†ŰžŰ§Ù…Ùƒ, ŰŁÙˆ ۧ۰ۧ ŰŁŰČŰ§Ù„ Ù†ŰžŰ§Ù… ŰȘŰŽŰșيل ۹۟۱ LILO, ŰŁÙˆ ۧ۰ۧ لم يŰȘÙˆŰ§ÙÙ‚ "
+"LILO\n"
+"مŰč ŰȘÙ‡ÙŠŰŠŰ© Ù†ŰžŰ§Ù…Ùƒ. يمكن ÙƒŰ°Ù„Ùƒ ۧ۳ŰȘŰźŰŻŰ§Ù… Ù‚Ű±Ű” Ű§Ù‚Ù„Ű§Űč Ù…ŰźŰ”Ű” مŰč\n"
+"Mandrake rescue image, Ù…Ù…Ű§ ÙŠŰŹŰčل Ű§Ù„Ù…ŰčŰ§Ù„ŰŹŰ© من Ű§Ù†Ù‡ÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„Ù†ŰžŰ§Ù… Ű§Ù„ŰźŰ·ÙŠŰ±Ű© ŰŁÙƒŰ«Ű± "
+"ŰłÙ‡ÙˆÙ„Ű©.\n"
+"هل ŰȘŰ±ÙŠŰŻ Űčمل Ù‚Ű±Ű” Ű§Ù‚Ù„Ű§Űč Ù„Ù†ŰžŰ§Ù…ÙƒŰŸ\n"
+"%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Germany"
-msgstr "ŰŁÙ„Ù…Ű§Ù†ÙŠŰ§"
+msgid ", USB printer \\#%s"
+msgstr ", ۷ۧۚŰčŰ© USB \\#%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Czech Republic"
-msgstr "ŰŹÙ…Ù‡ÙˆŰ±ÙŠŰ© Ű§Ù„ŰȘŰŽÙŠÙƒ"
+msgid "Latvian"
+msgstr "Ű§Ù„Ù„Ű§ŰȘÙÙŠŰ©"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belgium"
-msgstr "ŰšÙ„ŰŹÙŠÙƒŰ§"
+msgid "monthly"
+msgstr "ŰŽÙ‡Ű±ÙŠŰ§"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "France"
-msgstr "ÙŰ±Ù†ŰłŰ§"
+msgid "Module name"
+msgstr "Ű§ŰłÙ… Ű§Ù„ÙˆŰ­ŰŻŰ©"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Costa Rica"
-msgstr "ÙƒÙˆŰłŰȘŰ§Ű±ÙŠÙƒŰ§"
+msgid "Start at boot"
+msgstr "ۧۚۯۣ ŰčÙ†ŰŻ Ű§Ù„Ű„Ù‚Ù„Ű§Űč"
-#: ../../fsedit.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental Backups"
+msgstr "ۧ۳ŰȘŰźŰŻÙ… Ű§Ù„Ù†ŰłŰź Ű§Ù„ŰȘŰ±Ű§ÙƒÙ…ÙŠ (Ù„Ű§ ŰȘŰłŰȘŰšŰŻÙ„ Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠŰ© Ű§Ù„Ù‚ŰŻÙŠÙ…Ű©)"
+
+#: ../../any.pm:1
#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr " فŰȘŰ­Ű© Ű§Ù„ŰźŰ·Ű„ %s للكŰȘۧۚ۩ :%s"
+msgid "First sector of drive (MBR)"
+msgstr "Ű§Ù„Ù‚Ű·Ű§Űč Ű§Ù„ŰŁÙˆÙ„ من Ű§Ù„Ù‚Ű±Ű” (MBR)"
-#: ../../fsedit.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Nothing to do"
-msgstr "Ù„Ű§ ŰŽÙŠŰŠ للŰčمل"
+msgid "Joystick"
+msgstr "Űč۔ۧ Ű§Ù„ŰŁÙ„Űčۧۚ"
-#: ../../fsedit.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Ù„Ű§ ŰȘÙˆŰŹŰŻ Ù…ŰłŰ§Ű­Ű© ÙƒŰ§ÙÙŠŰ© للŰȘŰ­ŰŻÙŠŰŻ Ű§Ù„ŰąÙ„ÙŠ"
+msgid "El Salvador"
+msgstr "Ű§Ù„ŰłÙ„ÙŰ§ŰŻÙˆŰ±"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Ù„Ű§ يمكنك ۧ۳ŰȘŰźŰŻŰ§Ù… Ù†ŰžŰ§Ù… Ù…Ù„ÙŰ§ŰȘ Ù…Ű±Ù…Ù‘ŰČ Ù„Ù†Ù‚Ű·Ű© Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„ %s"
+msgid "Use Unicode by default"
+msgstr "ۧ۳ŰȘŰźŰŻÙ… ÙŠÙˆÙ†ÙŠÙƒÙˆŰŻ Ű§ÙŰȘŰ±Ű§Ű¶ÙŠŰ§Ù‹"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-"ŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ Ù†ŰžŰ§Ù… Ù…Ù„ÙŰ§ŰȘ Ű­Ù‚ÙŠÙ‚ÙŠ (ext2/ext3, resierfs, xfs, ŰŁÙˆ jfs) Ù„Ù†Ù‚Ű·Ű© Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„ "
-"Ù‡Ű°Ù‡\n"
+msgid "the module of the GNU/Linux kernel that handles the device"
+msgstr "ÙˆŰ­ŰŻŰ© Ù†ÙˆŰ§Ű© Ù„ÙŠÙ†ÙƒŰł Ű§Ù„ŰȘي ŰȘŰȘŰčŰ§Ù…Ù„ مŰč Ù‡Ű°Ű§ Ű§Ù„ŰŹÙ‡Ű§ŰČ"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Ù‡Ű°Ű§ Ű§Ù„ŰŻÙ„ÙŠÙ„ ÙŠŰŹŰš ŰŁÙ† يكون في Ù†ŰžŰ§Ù… Ű§Ù„Ù…Ù„ÙŰ§ŰȘ Ű§Ù„ŰŹŰ°Ű±ÙŠ"
+msgid "Trying to rescue partition table"
+msgstr "ŰŹŰ§Ű±ÙŠ Ù…Ű­Ű§ÙˆÙ„Ű© Ű§Ù†Ù‚Ű§Ű° ŰŹŰŻÙˆÙ„ Ű§Ù„ŰȘÙ‚ŰłÙŠÙ…"
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Ù„Ű§ يمكنك ۧ۳ŰȘŰźŰŻŰ§Ù… LVM Logical Volume Ù„Ù†Ù‚Ű·Ű© Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„ %s"
+msgid "Option %s must be an integer number!"
+msgstr "Ű§Ù„ŰźÙŠŰ§Ű± %s ÙŠŰŹŰš ŰŁÙ† يكون Ű±Ù‚Ù…Ű§ Ű”Ű­ÙŠŰ­Ű§Ù‹!"
-#: ../../fsedit.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
+"Entries you'll have to fill:\n"
+"%s"
msgstr ""
-"Ù„Ù‚ŰŻ ۧ۟ŰȘ۱ŰȘ ŰȘŰŹŰČŰŠŰ© RAID ŰšŰ±Ù…ŰŹÙŠŰ© كŰȘŰŹŰČŰŠŰ© ŰŹŰ°Ű±ÙŠŰ© (/).\n"
-"Ù„Ű§ ÙŠŰłŰȘŰ·ÙŠŰč ŰŁÙŠ Ù…Ű­Ù…Ù‘Ù„ Ű§Ù‚Ù„Ű§Űč Ű§Ù„ŰȘŰčŰ§Ù…Ù„ مŰč Ű°Ù„Ùƒ ŰšŰŻÙˆÙ† ŰȘŰŹŰČŰŠŰ© /boot.\n"
-"ÙŰ¶Ù„Ű§Ù‹ ŰȘŰŁÙƒŰŻ من Ű§Ű¶Ű§ÙŰ© ŰȘŰŹŰČŰŠŰ© /boot"
+"Entries you'll have to fill:\n"
+"%s"
-#: ../../fsedit.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Ù‡Ù†Ű§Ùƒ ŰȘŰŹŰČŰŠŰ© مŰč Ù†Ù‚Ű·Ű© Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„ %s Ù…ŰłŰšÙ‚Ű§Ù‹\n"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "لم ŰŁŰȘمكن من ۚۯۥ Ű§Ù„ŰȘŰ±Ù‚ÙŠŰ© Ű§Ù„Ű­ÙŠŰ© !!!\n"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "Ù†Ù‚Ű§ Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„ ÙŠŰŹŰš ŰŁÙ† ŰȘŰ­ŰȘوي ÙÙ‚Ű· Űčلى Ű§Ù„Ű­Ű±ÙˆÙ و/ŰŁÙˆ Ű§Ù„ŰąŰ±Ù‚Ű§Ù…"
+msgid "Name: "
+msgstr "Ű§Ù„Ű§ŰłÙ…: "
-#: ../../fsedit.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "ÙŠŰŹŰš ŰŁÙ† ŰȘۚۯۣ Ù†Ù‚Ű§Ű· Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„ ŰšŰ§Ù„ŰčÙ„Ű§Ù…Ű© /"
+msgid "16 million colors (24 bits)"
+msgstr "16 مليون لون (24 ŰšŰȘ)"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Ù„Ű§ يمكنك ۧ۳ŰȘŰźŰŻŰ§Ù… ReiserFS للŰȘŰŹŰČۊۧŰȘ ŰŁŰ”Űș۱ من 32 ميŰșŰ§ŰšŰ§ÙŠŰȘ"
+msgid "Allow all users"
+msgstr "Ű§ŰłÙ…Ű­ لكل Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…ÙŠÙ†"
-#: ../../fsedit.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Ù„Ű§ يمكنك ۧ۳ŰȘŰźŰŻŰ§Ù… JFS للŰȘŰŹŰČۊۧŰȘ ŰŁŰ”Űș۱ من 16 ميŰșŰ§ŰšŰ§ÙŠŰȘ"
+msgid "The official MandrakeSoft Store"
+msgstr "مŰȘۏ۱ MandrakeSoft Ű§Ù„Ű±ŰłÙ…ÙŠ"
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Resizing"
+msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰșÙŠÙŠŰ± Ű§Ù„Ű­ŰŹÙ…"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Cable connection"
+msgstr "ÙˆŰ”Ù„Ű© ÙƒÙŠŰšÙ„"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "User"
+msgstr "Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…"
#: ../../fsedit.pm:1
#, c-format
@@ -975,1001 +1783,257 @@ msgstr ""
"\n"
"هل ŰŁÙ†ŰȘ Ù…ÙˆŰ§ÙÙ‚ Űčلى ۟۳ۧ۱۩ كل Ű§Ù„ŰȘŰŹŰČۊۧŰȘ۟\n"
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Error"
-msgstr "۟۷ۣ"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr "قم ŰšÙ†ŰłŰź ۭۧŰȘÙŠŰ§Ű·ÙŠ ŰŹŰŻÙŠŰŻ ÙŰšÙ„ Ű§Ù„Ű„ŰłŰȘŰčۧۯ۩ (ÙÙ‚Ű· Ù„Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠŰ© Ű§Ù„Ù…ŰȘۯ۱ۏ۩)"
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "server"
-msgstr "ŰźŰ§ŰŻÙ…"
+msgid "Printer on parallel port \\#%s"
+msgstr "Ű§Ù„Ű·Ű§ŰšŰčŰ© Űčلى Ű§Ù„Ù…Ù†ÙŰ° Ű§Ù„Ù…ŰȘÙˆŰ§ŰČي \\#%s"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "with /usr"
-msgstr "مŰč /usr"
+msgid "Name"
+msgstr "Ű§Ù„Ű§ŰłÙ…"
-#: ../../fsedit.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "simple"
-msgstr "ŰšŰłÙŠŰ·"
+msgid "mkraid failed"
+msgstr "ÙŰŽÙ„ mkraid"
-#: ../../fs.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Enabling swap partition %s"
-msgstr "ŰŹŰ§Ű±ÙŠ ŰȘمكين ŰȘŰŹŰČŰŠŰ© Ű§Ù„ŰȘŰšŰŻÙŠÙ„ %s"
+msgid "Button 3 Emulation"
+msgstr "Ù…Ű­Ű§ÙƒŰ§Ű© Ű§Ù„ŰČ۱ 3"
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "error unmounting %s: %s"
-msgstr "۟۷ۣ في ۧŰČŰ§Ù„Ű© ŰȘŰ­Ù…ÙŠÙ„ %s: %s"
+msgid "Sending files..."
+msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ű±ŰłŰ§Ù„ Ű§Ù„Ù…Ù„ÙŰ§ŰȘ..."
-#: ../../fs.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "ÙŰŽÙ„ ŰȘŰ­Ù…ÙŠÙ„ Ű§Ù„ŰȘŰŹŰČŰŠŰ© %s في Ű§Ù„ŰŻÙ„ÙŠÙ„ %s"
+msgid "Israeli (Phonetic)"
+msgstr "Ű§Ù„ŰčŰšŰ±ÙŠŰ© (Ű”ÙˆŰȘÙŠŰ©)"
-# y, c-format
-#: ../../fs.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mounting partition %s"
-msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰ­Ù…ÙŠÙ„ Ű§Ù„ŰȘŰŹŰČŰŠŰ© %s"
+msgid "access to rpm tools"
+msgstr "Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ ŰŁŰŻÙˆŰ§ŰȘ rpm"
-#: ../../fs.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Checking %s"
-msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰȘŰŁÙƒŰŻ من %s"
+msgid "edit"
+msgstr "Ű­Ű±Ù‘Ű±"
-#: ../../fs.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Formatting partition %s"
-msgstr "ŰŹŰ§Ű±ÙŠ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰȘŰŹŰČŰŠŰ© %s"
+msgid "You must choose/enter a printer/device!"
+msgstr "ÙŠŰŹŰš Űčليك Ű§ŰŻŰźŰ§Ù„/ۧ۟ŰȘÙŠŰ§Ű± ۷ۧۚŰčŰ©/ŰŹÙ‡Ű§ŰČ"
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Creating and formatting file %s"
-msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù†ŰŽŰ§ŰĄ و ŰȘŰŹÙ‡ÙŠŰČ Ű§Ù„Ù…Ù„Ù %s"
+msgid "Permission problem accessing CD."
+msgstr "ŰȘÙˆŰŹŰŻ Ù…ŰŽÙƒÙ„Ű© في Ű§Ù„ŰȘŰ”Ű±ÙŠŰ­ Ù„Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹ."
-#: ../../fs.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Ù„Ű§ ŰŁŰčŰ±Ù كيف ŰŁŰŹÙ‡ŰČ %s في Ű§Ù„Ù†ÙˆŰč %s"
+msgid "Phone number"
+msgstr "Ű±Ù‚Ù… Ű§Ù„ŰȘّليفون "
-#: ../../fs.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s ŰȘŰŹÙ‡ÙŠŰČ %s Ù‚ŰŻ ÙŰŽÙ„"
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr "۟۷ۣ: Ù…ŰŽŰșل \"%s\" Ù„ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű”ÙˆŰȘ Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙƒ ŰșÙŠŰ± Ù…ÙˆŰŹÙˆŰŻ في Ű§Ù„Ù‚Ű§ŰŠÙ…Ű©"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"ۧ۶ŰșŰ· \"Ű§Ù„ŰȘŰ§Ù„ÙŠ ->\" ۧ۰ۧ كنŰȘ ŰȘŰ±ÙŠŰŻ Ű­Ű°Ù كل Ű§Ù„ŰȘŰŹŰČۊۧŰȘ Ű§Ù„Ù…ÙˆŰŹÙˆŰŻŰ© Űčلى Ű§Ù„Ù‚Ű±Ű”\n"
-"Ű§Ù„Ű”Ù„Űš. ۟۰ Ű­Ű°Ű±Ùƒ, ŰšŰčŰŻ Ù†Ù‚Ű±Ùƒ لŰČ۱ \"Ű§Ù„ŰȘŰ§Ù„ÙŠ ->\" لن ŰȘŰȘمكن من ۧ۳ŰȘŰčۧۯ۩\n"
-"ŰŁÙŠ ŰšÙŠŰ§Ù†Ű§ŰȘ ŰŁÙˆ ŰȘŰŹŰČۊۧŰȘ ÙƒŰ§Ù†ŰȘ Ù…ÙˆŰŹÙˆŰŻŰ© Űčلى Ù‡Ű°Ű§ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš.\n"
-"ŰšÙ…Ű§ ÙÙŠÙ‡Ű§ ŰšÙŠŰ§Ù†Ű§ŰȘ Windows\n"
-"Ű§Ù†Ù‚Ű± \"<- Ű§Ù„ŰłŰ§ŰšÙ‚\" Ù„Ű„ÙŠÙ‚Ű§Ù Ù‡Ű°Ù‡ Ű§Ù„ŰčÙ…Ù„ÙŠŰ© ŰŻÙˆÙ† ۟۳ۧ۱۩ ŰŁÙŠ ŰšÙŠŰ§Ù†Ű§ŰȘ ŰŁÙˆ ŰȘŰŹŰČۊۧŰȘ\n"
-"Ù…ÙˆŰŹÙˆŰŻŰ© Űčلى Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš."
+msgid "Printer name, description, location"
+msgstr "Ű§ŰłÙ… Ű§Ù„Ű·Ű§ŰšŰčŰ©, ÙˆŰ”Ù, Ű§Ù„Ù…ÙƒŰ§Ù†"
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"ۧ۟ŰȘ۱ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš Ű§Ù„Ű°ÙŠ ŰȘŰ±ÙŠŰŻ Ù…Ű­ÙˆÙ‡ لŰȘŰ«ŰšÙŠŰȘ ŰȘŰŹŰČŰŠŰ©\n"
-"Mandrake Linux Ű§Ù„ŰŹŰŻÙŠŰŻŰ©. ۟۰ Ű­Ű°Ű±Ùƒ, كل Ű§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„Ù…ÙˆŰŹÙˆŰŻ Űčليه ŰłŰȘŰ¶ÙŠŰč\n"
-"و لن يمكن ۧ۳ŰȘŰčۧۯŰȘÙ‡Ű§!"
+msgid "USA (broadcast)"
+msgstr "Ű§Ù„ÙˆÙ„Ű§ÙŠŰ§ŰȘ Ű§Ù„Ù…ŰȘÙ‘Ű­ŰŻŰ© Ű§Ù„ŰŁÙ…Ű±ÙŠÙƒÙŠÙ‘Ű© (broadcast)"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
+"Please choose the\n"
+"media for backup."
msgstr ""
+"۱ۏۧۥ ۧ۟ŰȘ۱\n"
+"ÙˆŰłÙŠŰ· Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű§Ű­ŰȘÙŠŰ§Ű·ÙŠ"
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
-msgstr ""
-"\"ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű”ÙˆŰȘ\": ۧ۰ۧ ŰȘم Ű§ÙƒŰȘŰŽŰ§Ù ŰšŰ·Ű§Ù‚Ű© Ű”ÙˆŰȘ Űčلى Ù†ŰžŰ§Ù…Ùƒ, ŰłÙŠŰȘم ŰčŰ±Ű¶Ù‡Ű§\n"
-"Ù‡Ù†Ű§. ۧ۰ۧ Ù„Ű§Ű­ŰžŰȘ ŰŁÙ† ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű”ÙˆŰȘ Ű§Ù„Ù…ŰčŰ±ÙˆŰ¶Ű© Ù‡Ù†Ű§ Ù„ÙŠŰłŰȘ ŰȘلك Ű§Ù„Ù…ÙˆŰŹÙˆŰŻŰ©\n"
-"فŰčÙ„Ű§Ù‹ Űčلى Ù†ŰžŰ§Ù…Ùƒ, يمكنك Ű§Ù„Ù†Ù‚Ű± Űčلى Ű§Ù„ŰČ۱ و ۧ۟ŰȘÙŠŰ§Ű± Ù…ŰŽŰșل\n"
-"۹۟۱."
+msgid "Use Xinerama extension"
+msgstr "ۧ۳ŰȘŰźŰŻŰ§Ù… Ű§Ù…ŰȘۯۧۯ Xinerama"
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
+msgid "Loopback"
+msgstr "Loopback"
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
msgstr ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+"ŰȘŰč۰۱ Űșلق mkbootdisk: \n"
+" %s \n"
+" %s"
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"ŰłÙŠÙ‚ÙˆÙ… DrakX ŰŁÙˆ?ً ŰšŰ§Ù„ŰȘŰ­Ù‚Ù‚ من ÙˆŰŹÙˆŰŻ ŰŁŰŹÙ‡ŰČŰ© IDE Űčلى Ù‡Ű°Ű§ Ű§Ù„ÙƒÙ…ŰšÙŠÙˆŰȘ۱. ŰłÙŠÙ‚ÙˆÙ…\n"
-"ŰŁÙŠŰ¶Ű§Ù‹ ŰšŰ§Ù„ŰšŰ­Ű« Űčن ŰšŰ·Ű§Ù‚Ű§ŰȘ PCI SCSI Űčلى Ù†ŰžŰ§Ù…Ùƒ. ۧ۰ۧ ŰȘم Ű§ÙŠŰŹŰ§ŰŻ ŰšŰ·Ű§Ù‚Ű©\n"
-"SCSI,ŰłÙŠÙ‚ÙˆÙ… DrakX ŰšŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ù…ŰŽŰșل Ű§Ù„Ù…Ù†Ű§ŰłŰš ŰŁÙˆŰȘÙˆÙ…Ű§ŰȘÙŠÙƒÙŠŰ§Ù‹.\n"
-"\n"
-"و ?ن ŰčÙ…Ù„ÙŠŰ© Ű§Ù„ŰȘŰ­Ù‚Ù‚ من Ű§Ù„ŰčŰȘۧۯ Ù„ÙŠŰłŰȘ ŰźŰ§Ù„ÙŠŰ© من ۧ?۟۷ۧۥ, ŰłÙŠÙ‚ÙˆÙ… DrakX ŰšŰłŰ€Ű§Ù„Ùƒ ŰčÙ…Ù‘Ű§ "
-"ۧ۰ۧ\n"
-"ÙƒŰ§Ù†ŰȘ Ù„ŰŻÙŠÙƒ ŰšŰ·Ű§Ù‚Ű© PCI SCSI. Ű§Ù„Ù†Ù‚Ű± Űčلى \"نŰčم\" ŰłÙŠŰč۱۶ Ù‚Ű§ŰŠÙ…Ű© ŰšŰšŰ·Ű§Ù‚Ű§ŰȘ SCSI\n"
-"لŰȘŰźŰȘۧ۱ Ù…Ù†Ù‡Ű§. Ű§Ù†Ù‚Ű± \"?\" ۧ۰ۧ كنŰȘ ŰȘŰčلم ŰŁÙ†Ù‡ ? ŰȘÙˆŰŹŰŻ ŰšŰ·Ű§Ù‚Ű§ŰȘ SCSI Űčلى\n"
-"Ù…Ű§ÙƒÙŠÙ†ŰȘك. ۧ۰ۧ لم ŰȘكن مŰȘŰŁÙƒŰŻŰ§Ù‹, يمكنك Ű§Ù„ŰȘŰŁÙƒŰŻ من Ù‚Ű§ŰŠÙ…Ű© Ű§Ù„ŰčŰȘۧۯ Ű§Ù„ŰȘي ŰȘم Ű§ÙŠŰŹŰ§ŰŻÙ‡Ű§\n"
-"Űčلى Ù…Ű§ÙƒÙŠÙ†ŰȘك Űčن Ű·Ű±ÙŠÙ‚ ۧ۟ŰȘÙŠŰ§Ű± \"Űč۱۶ مŰčÙ„ÙˆÙ…Ű§ŰȘ Ű§Ù„ŰčŰȘۧۯ\" و Ù†Ù‚Ű±\n"
-"\"Ű§Ù„ŰȘŰ§Ù„ÙŠ->\". ŰȘŰŁÙƒŰŻ من Ù‚Ű§ŰŠÙ…Ű© Ű§Ù„ŰčŰȘۧۯ Ű«Ù… ۧ۶ŰșŰ· Űčلى ŰČ۱ \"Ű§Ù„ŰȘŰ§Ù„ÙŠ\n"
-"->\" للŰčÙˆŰŻŰ© Ű§Ù„Ù‰ ŰŽŰ€Ű§Ù„ ÙˆŰ§ŰŹÙ‡Ű© SCSI.\n"
-"\n"
-"ۧ۰ۧ ۧ۶۷۱۱ŰȘ Ű§Ù„Ù‰ ŰȘŰ­ŰŻÙŠŰŻ Ù…ÙˆŰ§ŰŠÙ… PCI SCSI ÙŠŰŻÙˆÙŠŰ§Ù‹, ÙŰłÙŠŰłŰŁÙ„Ùƒ DrakX ŰčÙ…Ù‘Ű§ ۧ۰ۧ كنŰȘ\n"
-"ŰȘŰ±ÙŠŰŻ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙ‡Ű§. ÙŠŰŹŰš ŰŁÙ† ŰȘŰłÙ…Ű­ لـ DrakX ŰšŰŁÙ† يŰȘŰ­Ù‚Ù‚ من\n"
-"Ű§Ù„ŰčŰȘۧۯ Ù„Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„ŰźŰ§Ű”Ű© ŰšŰ§Ù„ŰšŰ·Ű§Ù‚Ű© و Ű§Ù„ŰȘي ÙŠÙŒÙŰ­ŰȘۧۏ Ű§Ù„ÙŠÙ‡Ű§ ليŰȘم ۚۯۥ\n"
-"Űčمل Ű§Ù„ŰšŰ·Ű§Ù‚Ű©. في ŰŁŰșÙ„Űš ۧ?ÙˆÙ‚Ű§ŰȘ, ŰłÙŠÙ‚ÙˆÙ… DrakX ŰšŰ§Ù„ŰźŰ·ÙˆŰ© ŰŻÙˆÙ† ŰŁÙŠ\n"
-"Ù…ŰŽŰ§ÙƒÙ„.\n"
-"\n"
-"ۧ۰ۧ لم يŰȘمكن DrakX من Ű§Ù„ŰȘŰčŰ±Ù Űčلى Ű§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„Ű¶Ű±ÙˆŰ±ÙŠŰ©Ù„ŰȘÙ…Ű±ÙŠŰ±Ù‡Ű§\n"
-"Ű§Ù„Ù‰ Ű§Ù„ŰčŰȘۧۯ, ففي Ù‡Ű°Ù‡ Ű§Ù„Ű­Ű§Ù„ ŰłŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ ŰȘÙ‡ÙŠŰŠŰ©\n"
-"Ű§Ù„Ù…ŰŽŰșّل ÙŠŰŻÙˆÙŠŰ§Ù‹."
+msgid "West Europe"
+msgstr "ŰŁÙˆŰ±ÙˆŰšÙ‘Ű§ Ű§Ù„ŰșŰ±ŰšÙŠÙ‘Ű©"
-#: ../../help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
msgstr ""
-"ۧ?ن, Ű­Ű§Ù† وقŰȘ ۧ۟ŰȘÙŠŰ§Ű± Ù†ŰžŰ§Ù… Ű§Ù„Ű·ŰšŰ§ŰčŰ© Ù„Ù†ŰžŰ§Ù…Ùƒ. ŰȘÙˆÙŰ± ŰŁÙ†ŰžÙ…Ű© Ű§Ù„ŰȘŰŽŰșيل ۧ?ŰźŰ±Ù‰\n"
-"Ù†ŰžŰ§Ù… ۷ۚۧŰčŰ© ÙˆŰ§Ű­ŰŻ, لكن Mandrake Linux ÙŠÙˆÙŰ± لك Ù†ŰžŰ§Ù…ÙŠÙ†. كل Ù†ŰžŰ§Ù… Ù…Ù†Ű§ŰłŰš\n"
-"لنوŰș مŰčين من Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ©.\n"
-"\n"
-" * \"pdq\"--و هو ۧ۟ŰȘ۔ۧ۱ لـ``print, don't queue'' ŰŁÙŠ ``ۧ۷ۚŰč و ? ŰȘŰ”Ù'', Ù‡Ű°Ű§ هو "
-"Ű§Ù„ŰźÙŠŰ§Ű± ۧ?Ù…Ű«Ù„\n"
-"ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ù„ŰŻÙŠÙƒ ÙˆŰ”Ù„Ű© Ù…ŰšŰ§ŰŽŰ±Ű© ŰšŰ§Ù„Ű·Ű§ŰšŰčŰ©, و ŰȘŰ±ÙŠŰŻ ŰȘÙŰ§ŰŻÙŠ ŰŁÙŠ ۧ۱ŰȘŰšŰ§Ùƒ في Ű§Ù„Ű·Ű§ŰšŰčŰ©\n"
-"و Ù„ŰŻÙŠÙƒ ۷ۧۚŰčۧŰȘ Űčلى Ű§Ù„ŰŽŰšÙƒŰ©.(يقوم \"pdq\" ŰšŰ§Ù„ŰȘŰčŰ§Ù…Ù„ مŰč ۭۧ?ŰȘ Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„ŰšŰłÙŠŰ·Ű©\n"
-"و يŰčÙŠŰšÙ‡ Ű§Ù„ŰšŰ·ŰŠ ŰčÙ†ŰŻ ۧ?ŰłŰȘŰźŰŻŰ§Ù… مŰč Ű§Ù„ŰŽŰšÙƒŰ§ŰȘ). من ۧ?ÙŰ¶Ù„ ŰŁÙ† ŰȘŰłŰȘŰźŰŻÙ… \"pdq\" ۧ۰ۧ.\n"
-"ÙƒŰ§Ù†ŰȘ Ù‡Ű°Ù‡ ŰȘۏ۱ۚŰȘك ۧ?ولى مŰč Ù†ŰžŰ§Ù… Ù„ÙŠÙ†ÙƒŰł.\n"
-"\n"
-" * \"CUPS\" - ``Common UNIX Printing System'', هو Ű§Ù„ŰźÙŠŰ§Ű± ۧ?Ù…Ű«Ù„\n"
-"Ù„Ù„Ű·ŰšŰ§ŰčŰ© Űčلى ۷ۧۚŰčŰȘك Ű§Ù„Ù…Ű­Ù„ÙŠŰ© ŰŁÙˆ Ű­ŰȘى Űčلى ۷ۧۚŰčŰ© في Ű§Ù„Ù†Ű”Ù ۧ?۟۱ من Ű§Ù„ÙƒÙˆÙƒŰš. Ű§Ù†Ù‡\n"
-"ŰłÙ‡Ù„ ۧ?Űčۯۧۯ و يمكن ŰŁÙ† يŰȘŰ”Ű±Ù ÙƒŰźŰ§ŰŻÙ… ŰŁÙˆ كŰčميل ?Ù†ŰžÙ…Ű© ۷ۚۧŰčŰ© \"lpd\"\n"
-"Ű§Ù„Ù‚ŰŻÙŠÙ…Ű©, Ù„Ű°Ű§ ÙŰ„Ù†Ù‡ مŰȘÙˆŰ§ÙÙ‚ مŰč ŰŁÙ†ŰžÙ…Ű© Ű§Ù„ŰȘŰŽŰșيل Ű§Ù„Ù‚ŰŻÙŠÙ…Ű©\n"
-"Ű§Ù„ŰȘي ? ŰȘŰČŰ§Ù„ ŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ ŰźŰŻÙ…Ű§ŰȘ Ű§Ù„Ű·ŰšŰ§ŰčŰ©.ŰšÙŠÙ†Ù…Ű§ Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ© ŰłÙ‡Ù„Ű©\n"
-"و Ù‚ÙˆÙŠŰ© Ù…Ű«Ù„ \"pdq\". ۧ۰ۧ كنŰȘ ŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ Ù…Ű­Ű§ÙƒŰ§Ű© ŰźŰ§ŰŻÙ… \"lpd\", ŰȘŰŁÙƒŰŻ\n"
-"من ŰȘŰŽŰșيل Ù…Ű±Ű§Ù‚Űš \"cups-lpd\". ÙŠŰ­ŰȘوي CUPS Űčلى ÙˆŰ§ŰŹÙ‡Ű§ŰȘ\n"
-"Ű±ŰłÙˆÙ…ÙŠŰ© Ù„Ù„Ű·ŰšŰ§ŰčŰ© ŰŁÙˆ ۧ۟ŰȘÙŠŰ§Ű± ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„Ű·Ű§ŰšŰčŰ© و ۄۯۧ۱۩\n"
-"Ű§Ù„Ű·Ű§ŰšŰčŰ©.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
-"ۧ۰ۧ قمŰȘ يŰȘÙ‚Ű±ÙŠŰ± ۧ۟ŰȘÙŠŰ§Ű±Ùƒ ۧ?ن, Ű«Ù… لم يŰčŰŹŰšÙƒ Ù†ŰžŰ§Ù… Ű§Ù„Ű·ŰšŰ§ŰčŰ©\n"
-"ÙÙŠÙ…Ű§ ŰšŰčŰŻ, يمكنك ŰȘŰșÙŠÙŠŰ±Ù‡ Űčن Ű·Ű±ÙŠÙ‚ ŰȘŰŽŰșيل PrinterDrake من Ù…Ű±ÙƒŰČ ŰȘŰ­ÙƒÙ… Mandrake\n"
-"و Ű§Ù„Ù†Ù‚Ű± Űčلى ŰČ۱ Ű§Ù„ŰźŰšÙŠŰ±."
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
-msgstr ""
+msgid "Harddrake2 version %s"
+msgstr "Harddrake2 Ű§Ù„Ű„Ű”ŰŻŰ§Ű± %s"
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-"ŰšŰčŰŻÙ…Ű§ قمŰȘ ŰšŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Ù…ŰčŰ§Ù…?ŰȘ Ű§Ù„ŰčŰ§Ù…Ű© Ù„Ù…Ű­Ù…Ù‘Ù„ ۧ?Ù‚Ù„Ű§Űč, ÙŰłÙŠŰȘم\n"
-"Űč۱۶ Ù‚Ű§ŰŠÙ…Ű© ŰźÙŠŰ§Ű±Ű§ŰȘ ۧ?Ù‚Ù„Ű§Űč Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű© ŰčÙ†ŰŻ ۚۯۥ Ű§Ù„ŰȘŰŽŰșيل.\n"
-"\n"
-"ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ù‡Ù†Ű§Ùƒ ŰŁÙ†ŰžÙ…Ű© ŰȘŰŽŰșيل ŰŁŰźŰ±Ù‰ Ù…Ű«ŰšŰȘŰ© Űčلى Ù…Ű§ÙƒÙŠÙ†ŰȘك ÙŰłÙŠŰȘم Ű§Ű¶Ű§ÙŰȘÙ‡Ű§\n"
-"ŰąÙ„ÙŠŰ§Ù‹ Ű§Ù„Ù‰ Ù‚Ű§ŰŠÙ…Ű© ۧ?Ù‚Ù„Ű§Űč. يمكنك Ű§Ù„ŰȘŰ­ÙƒÙ… ŰšŰ§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ\n"
-"Ű§Ù„Ù…ÙˆŰŹÙˆŰŻŰ© ŰšÙ†Ù‚Ű± \"Ű§Ű¶Ù\" ?Ù†ŰŽŰ§ŰĄ Ù…ŰŻŰźÙ„ ŰŹŰŻÙŠŰŻ, و ۧ۟ŰȘÙŠŰ§Ű± Ù…ŰŻŰźÙ„ و\n"
-"Ù†Ù‚Ű± \"ŰȘŰčŰŻÙŠÙ„\" ŰŁÙˆ \"Ű­Ű°Ù\" لŰȘŰčŰŻÙŠÙ„ ŰŁÙˆ Ű­Ű°Ù Ű§Ù„Ù…ŰŻŰźÙ„. \"Ù…ÙˆŰ§ÙÙ‚\" يŰȘŰŁÙƒŰŻ\n"
-"من ŰȘŰșÙŠÙŠŰ±Ű§ŰȘك.\n"
-"\n"
-"Ű±ŰšÙ…Ű§ ? ŰȘŰ±ÙŠŰŻ ?ي ێ۟۔ يŰȘمكن من ۧŰčۧۯ۩ ŰȘŰŽŰșيل Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű© ŰŁÙ† ÙŠŰłŰȘŰ·ÙŠŰč\n"
-"Ű§Ù„ÙˆŰ”Ù„ Ű§Ù„Ù‰ ŰŁÙ†ŰžÙ…Ű© Ű§Ù„ŰȘŰŽŰșيل ۧ?ŰźŰ±Ù‰. يمكنك Ű­Ű°Ù Ű§Ù„Ù…ŰŻŰ§ŰźÙ„ Ű§Ù„Ù…Ù‚Ű§ŰšÙ„Ű©\n"
-"?Ù†ŰžÙ…Ű© Ű§Ù„ŰȘŰŽŰșيل Ù„Ű­Ű°ÙÙ‡Ű§ من Ù‚Ű§ŰŠÙ…Ű© Ù…Ű­Ù…Ù‘Ù„ ۧ?Ù‚Ù„Ű§Űč, لكن في Ù‡Ű°Ù‡ Ű§Ù„Ű­Ű§Ù„Ű© ŰłŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ Ù‚Ű±Ű”\n"
-"Ù…Ű±Ù† Ù„Ù„Ű„Ù‚?Űč كي ŰȘŰȘمكن من Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ ŰŁÙ†ŰžÙ…Ű©\n"
-"Ű§Ù„ŰȘŰŽŰșيل ۧ?ŰźŰ±Ù‰!"
+msgid "Copying %s"
+msgstr "ŰŹŰ§Ű±ÙŠ Ù†ŰłŰź %s"
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
-msgstr ""
+msgid "Choose color"
+msgstr "Ű„ŰźŰȘ۱ Ű§Ù„Ù„ÙˆÙ†"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
-msgstr ""
-"Ù‡Ű°Ù‡ هي ŰŁÙ‡Ù… ŰźŰ·ÙˆŰ© ŰȘŰȘŰźŰ°Ù‡Ű§ ?من Ù†ŰžŰ§Ù… Ù„ÙŠÙ†ÙƒŰł Ű§Ù„ŰźŰ§Ű”\n"
-"ŰšÙƒ: Űčليك Ű§ŰŻŰźŰ§Ù„ ÙƒÙ„Ù…Ű© Ù…Ű±ÙˆŰ± Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… \"Ű§Ù„ŰŹŰ°Ű±\" (root) و هو\n"
-"Ù…ŰŻÙŠŰ± Ű§Ù„Ù†ŰžŰ§Ù… و Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… Ű§Ù„ÙˆŰ­ÙŠŰŻ Ű§Ù„Ù…ŰźÙˆÙ„ ŰšŰȘŰ­ŰŻÙŠŰ« Ű§Ù„Ù†ŰžŰ§Ù…, Ű§Ű¶Ű§ÙŰ© Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…ÙŠÙ†,\n"
-"ŰȘŰșÙŠÙŠŰ± ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Ù†ŰžŰ§Ù…, Ű§Ù„Űź. ۚۧ۟ŰȘ۔ۧ۱ يمكن Ù„Ù„Ù…ŰłŰȘŰźŰŻÙ… \"Ű§Ù„ŰŹŰ°Ű±\" ŰŁÙ† يفŰčل\n"
-"كل ŰŽŰŠ! Ù„Ű°Ű§ Űčليك ۧ۟ŰȘÙŠŰ§Ű± ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ± Ű”Űčۚ۩\n"
-"Ű§Ù„ŰȘŰźÙ…ÙŠÙ† - ŰłÙŠŰźŰšŰ±Ùƒ DrakX ۧ۰ۧ ÙƒŰ§Ù†ŰȘ ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ± Ű§Ù„ŰȘي ŰȘŰłŰȘŰźŰŻÙ…Ù‡Ű§ ŰłÙ‡Ù„Ű©. ÙƒÙ…Ű§\n"
-"ŰȘŰ±Ù‰, Ù„ŰłŰȘ Ù…ŰŹŰšŰ±Ű§Ù‹ Űčلى Ű§ŰŻŰźŰ§Ù„ ÙƒÙ„Ù…Ű© Ù…Ű±ÙˆŰ±, Ù„ÙƒÙ†Ù†Ű§ Ù†Ù†Ű”Ű­ ۚێۯ۩ ?ن ۭۧŰȘÙ…Ű§Ù„ Ű­ŰŻÙˆŰ«\n"
-"ۣ۟۷ۧۥ مŰč Ù„ÙŠÙ†ÙƒŰł ŰčŰ§ŰŻÙŠ Ù…Ű«Ù„ ŰšŰ§Ù‚ÙŠ ŰŁÙ†ŰžÙ…Ű© Ű§Ù„ŰȘŰŽŰșيل ۧ?ŰźŰ±Ù‰. و ŰšÙ…Ű§ ŰŁÙ† \"Ű§Ù„ŰŹŰ°Ű±\" يمكنه\n"
-"ŰȘŰčŰŻÙŠ كل Ű§Ù„Ű­ŰŻÙˆŰŻ و Ù‚ŰŻ ÙŠŰ­Ű°Ù كل Ű§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ من ŰŻÙˆÙ† Ù‚Ű”ŰŻ, Ù„Ű°Ű§ ÙÙŠŰŹŰš ŰŁÙ† يكون من\n"
-"Ű§Ù„Ű”ŰčŰš ŰŁÙ† ŰȘ۔ۭۚ Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… \"Ű§Ù„ŰŹŰ°Ű±\".\n"
-"\n"
-"ÙŠŰŹŰš ŰŁÙ† ŰȘكون ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ± ŰźÙ„ÙŠŰ·Ű§Ù‹ من Ű§Ù„Ű­Ű±ÙˆÙ و ۧ?Ű±Ù‚Ű§Ù… ÙƒÙ…Ű§ ÙŠŰŹŰš ŰŁÙ† ŰȘŰ­ŰȘوي\n"
-"Űčلى 8 Ű­Ű±ÙˆÙ Űčلى ۧ?قل. ? ŰȘكŰȘŰš ÙƒÙ„Ù…Ű© Ù…Ű±ÙˆŰ± \"Ű§Ù„ŰŹŰ°Ű±\" Űčلى ÙˆŰ±Ù‚ -- Ù‡Ű°Ű§ ÙŠŰłÙ‡Ù‘Ù„\n"
-"ۧ۟ŰȘŰ±Ű§Ù‚ Ű§Ù„Ù†ŰžŰ§Ù… ۧ۰ۧ Ű±ŰŁÙ‰ ŰŁŰ­ŰŻ ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ±.\n"
-"\n"
-"Ù†Ű”ÙŠŰ­Ű© ŰŁŰźŰ±Ù‰ -- ? ŰȘŰŹŰčل ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ± Ű·ÙˆÙŠÙ„Ű© ŰŹŰŻŰ§Ù‹ ŰŁÙˆ مŰčÙ‚Ù‘ŰŻŰ© ?نك ÙŠŰŹŰš ŰŁÙ† ŰȘكون\n"
-"Ù‚Ű§ŰŻŰ±Ű§Ù‹ Űčلى ŰȘŰ°ÙƒŰ±Ù‡Ű§!\n"
-"\n"
-"لن يŰȘم Űč۱۶ ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ± Űčلى Ű§Ù„ŰŽŰ§ŰŽŰ©. لŰȘقليل ÙŰ±Ű”Ű© Ű­ŰŻÙˆŰ«\n"
-"۟۷ۣ ŰŁŰ«Ù†Ű§ŰĄ Ű§Ù„ÙƒŰȘۧۚ۩, ŰłŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ Ű§ŰŻŰźŰ§Ù„ ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ± Ù…Ű±ŰȘين.\n"
-"ۧ۰ۧ ۣ۟۷ۣŰȘ في Ű§Ù„ÙƒŰȘۧۚ۩ في Ű§Ù„Ù…Ű±ŰȘين, ÙŰłÙŠŰŹŰš ۧ۳ŰȘŰźŰŻŰ§Ù… ÙƒÙ„Ù…Ű©\n"
-"Ű§Ù„Ù…Ű±ÙˆŰ± \"Ű§Ù„ŰźŰ§Ű·ŰŠŰ©\" في Ű§Ù„Ù…Ű±Ű© ۧ?ولى Ű§Ù„ŰȘي ŰȘŰŻŰźÙ„ ÙÙŠÙ‡Ű§ Ű§Ù„Ù‰ Ű§Ù„Ù†ŰžŰ§Ù….\n"
-"\n"
-"ۧ۰ۧ كنŰȘ ŰȘŰ±ÙŠŰŻ Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ Ù‡Ű°Ű§ Ű§Ù„ÙƒÙ…ŰšÙŠÙˆŰȘ۱ لكي يŰȘم Ű§Ù„ŰȘŰ­ÙƒÙ… ŰšÙƒ Űčن Ű·Ű±ÙŠÙ‚\n"
-"ŰźŰ§ŰŻÙ… Ù…Ű”Ű§ŰŻÙ‚Ű©, ۧ۶ŰșŰ· ŰČ۱ \"مŰȘÙ‚ŰŻÙ…\".\n"
-"\n"
-"ۧ۰ۧ ÙƒŰ§Ù†ŰȘ ŰŽŰšÙƒŰȘك ŰȘŰłŰȘŰźŰŻÙ… LDAP, NIS, ŰŁÙˆ PDC Windows Domain Authentication "
-"Services\n"
-"Űčليك ۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„ŰźÙŠŰ§Ű± Ű§Ù„Ù…Ù†Ű§ŰłŰš كـ\"Ù…Ű”Ű§ŰŻÙ‚Ű©\". ۧ۰ۧ لم ŰȘŰčلم ŰŁÙŠ Ù…Ù†Ù‡Ű§ ŰȘŰ±ÙŠŰŻ\n"
-"ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡, Ű§ŰłŰŁÙ„ Ù…ŰŻÙŠŰ± Ű§Ù„ŰŽŰšÙƒŰ© Ù„ŰŻÙŠÙƒ.\n"
-"\n"
-"ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ù„ŰŻÙŠÙƒ Ù…ŰŽÙƒÙ„Ű© في ŰȘŰ°ÙƒŰ± ÙƒÙ„Ù…Ű§ŰȘ Ű§Ù„Ù…Ű±ÙˆŰ±, يمكنك ۧ۟ŰȘÙŠŰ§Ű±\n"
-"\"? ÙƒÙ„Ù…Ű© Ù…Ű±ÙˆŰ±\" ۧ۰ۧ لم يكن Ű§Ù„ÙƒÙ…ŰšÙŠÙˆŰȘ۱ Ű§Ù„ŰźŰ§Ű” ŰšÙƒ مŰȘŰ”Ù„Ű§Ù‹ ۚۧ?نŰȘŰ±Ù†ŰȘ,\n"
-"ŰŁÙˆ ŰŁÙ†Ùƒ ŰȘŰ«Ù‚ في Ű§Ù„Ù„Ű°ÙŠÙ† ÙŠŰŻŰźÙ„ÙˆÙ† Ű§Ù„Ù‰ Ű§Ù„Ù†ŰžŰ§Ù…."
+msgid "Dominican Republic"
+msgstr "ŰŹÙ…Ù‡ÙˆŰ±ÙŠŰ© Ű§Ù„ŰŻÙˆÙ…ÙŠÙ†ÙŠÙƒŰ§Ù†"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ Ű§Ù„Ù…Ù†ÙŰ° Ű§Ù„Ű”Ű­ÙŠŰ­. Ù…Ű«Ù„Ű§Ù‹ Ù„Ù…Ù†ÙŰ° \"COM1\" في\n"
-"Windows Ű§ŰłÙ…Ù‡ \"ttys0\" في Ù„ÙŠÙ†ÙƒŰł."
+msgid "Swaziland"
+msgstr "ŰłÙˆŰ§ŰČÙŠÙ„Ű§Ù†ŰŻ"
-#: ../../help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
-msgstr ""
+msgid "Set-UID"
+msgstr "Set-UID"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
-msgstr ""
-"ۧ۟ŰȘÙŠŰ§Ű±Ùƒ للŰșŰ© Ű§Ù„Ù…ÙŰ¶Ù„Ű© ŰłÙŠŰ€Ű«Ű± Űčلى لŰșŰ© ÙˆŰ«Ű§ŰŠÙ‚ Ű§Ù„Ù…ŰłŰ§ŰčŰŻŰ©\n"
-"و ŰšŰ±Ù†Ű§Ù…ŰŹ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ و Ű§Ù„Ù†ŰžŰ§Ù… ŰšŰŽÙƒÙ„ ŰčŰ§Ù…. ŰŁÙˆ?ً ۧ۟ŰȘ۱ Ű§Ù„Ù…Ù†Ű·Ù‚Ű© Ű§Ù„ŰȘي\n"
-"ŰȘŰȘÙˆŰ§ŰŹŰŻ ÙÙŠÙ‡Ű§, Ű«Ù… Ű§Ù„Ù„ŰșŰ© Ű§Ù„ŰȘي ŰȘŰȘŰ­ŰŻŰ« ŰšÙ‡Ű§.\n"
-"\n"
-"۶ŰșŰ· ŰČ۱ \"مŰȘÙ‚ŰŻÙ…\" ŰłÙŠŰłÙ…Ű­ لك ۚۧ۟ŰȘÙŠŰ§Ű± لŰșۧŰȘ\n"
-"ŰŁŰźŰ±Ù‰ ليŰȘم ŰȘŰ«ŰšÙŠŰȘÙ‡Ű§ Űčلى Ù…Ű­Ű·Ű© Ű§Ù„Űčمل Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙƒ,و من Ű«Ù…\n"
-"ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ù…Ù„ÙŰ§ŰȘ Ű§Ù„ŰźŰ§Ű”Ű© ŰšŰ§Ù„Ù„ŰșۧŰȘ Ù„ÙˆŰ«Ű§ŰŠÙ‚ Ű§Ù„Ù…ŰłŰ§ŰčŰŻŰ© و Ű§Ù„ŰȘŰ·ŰšÙŠÙ‚Ű§ŰȘ, Ù…Ű«Ù„Ű§Ù‹\n"
-"ۧ۰ۧ كنŰȘ ŰłŰȘŰłŰȘŰ¶ÙŠÙ Ù…ŰłŰȘŰźŰŻÙ…ÙŠÙ† من ŰŁŰłŰšŰ§Ù†ÙŠŰ§ Űčلى Ù…Ű§ÙƒÙŠÙ†ŰȘك, ۧ۟ŰȘ۱ ۧ?Ù†ŰŹÙ„ÙŠŰČÙŠŰ©\n"
-"كلŰșŰ© Ű§ÙŰȘŰ±Ű§Ű¶ÙŠŰ© في Ű§Ù„Ù†Ù…Ű· Ű§Ù„ŰŽŰŹŰ±ÙŠ و \"ۧ?ŰłŰšŰ§Ù†ÙŠŰ©\" في Ű§Ù„Ù‚ŰłÙ…\n"
-"Ű§Ù„Ù…ŰȘÙ‚ŰŻÙ….\n"
-"?Ű­Űž ŰŁÙ†Ùƒ Ù„ŰłŰȘ Ù…Ù‚ÙŠŰŻŰ§Ù‹ ۚۧ۟ŰȘÙŠŰ§Ű± لŰșŰ© ÙˆŰ§Ű­ŰŻŰ© Ű§Ű¶Ű§ÙÙŠŰ©. Ű­Ű§Ù„\n"
-"ۧ۟ŰȘÙŠŰ§Ű±Ùƒ Ù„Ù„Ű„ŰčۯۧۯۧŰȘ Ű§Ù„Ù…Ű­Ù„ÙŠŰ©, ۧ۶ŰșŰ· ŰČ۱ \"Ű§Ù„ŰȘŰ§Ù„ÙŠ ->\"\n"
-"للمŰȘۧۚŰčŰ©.\n"
-"\n"
-"للŰȘŰșÙŠÙŠŰ± ŰšÙŠÙ† Ű§Ù„Ù„ŰșۧŰȘ Ű§Ù„Ù…ŰȘŰčŰŻŰŻŰ© Ű§Ù„Ù…Ű«ŰšŰȘŰ© Űčلى Ű§Ù„Ù†ŰžŰ§Ù…, يمكنك\n"
-"ŰȘŰŽŰșيل ۧ?Ù…Ű± \"/usr/sbin/localedrake\"ÙƒÙ…ŰłŰȘŰźŰŻÙ… ۏ۰۱ لŰȘŰșÙŠÙŠŰ±\n"
-"Ű§Ù„Ù„ŰșŰ© Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…Ű© Űčن Ű·Ű±ÙŠÙ‚ Ű§Ù„Ù†ŰžŰ§Ù… ككل. ŰȘŰŽŰșيل ۧ?Ù…Ű± ÙƒÙ…ŰłŰȘŰźŰŻÙ… ŰčŰ§ŰŻÙŠ\n"
-"ŰłÙŠŰșÙŠŰ± ÙÙ‚Ű· ۧŰčۯۧۯۧŰȘ Ű§Ù„Ù„ŰșŰ© Ù„Ù‡Ű°Ű§ Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… ÙÙ‚Ű·."
+msgid "Please check if you are using CDRW media"
+msgstr "ÙŰ¶Ù„Ű§ قم ŰšŰ§Ù„ŰȘŰŁŰŽÙŠŰ± Ù‡Ù†Ű§ ۧ۰ۧ كنŰȘ ŰȘŰłŰȘŰźŰŻÙ… ÙˆŰłÙŠŰ· CDRW"
#: ../../help.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
msgstr ""
-"ۧŰčŰȘÙ…Ű§ŰŻŰ§Ù‹ Űčلى Ű§Ù„Ù„ŰșŰ© ۧ?فŰȘŰ±Ű§Ű¶ÙŠŰ© Ű§Ù„ŰȘي ۧ۟ŰȘ۱ŰȘÙ‡Ű§ في Ù‡Ű°Ű§ Ű§Ù„Ù‚ŰłÙ…, ŰłÙŠÙ‚ÙˆÙ… DrakX\n"
-"ۚۧ۟ŰȘÙŠŰ§Ű± ŰȘÙ‡ÙŠŰŠŰ© Ù„ÙˆŰ­Ű© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­ ŰąÙ„ÙŠŰ§Ù‹. ŰčÙ…ÙˆÙ…Ű§Ù‹,\n"
-"Ű±ŰšÙ…Ű§ Ù„ÙŠŰłŰȘ Ù„ŰŻÙŠÙƒ Ù„ÙˆŰ­Ű© Ù…ÙŰ§ŰȘÙŠŰ­ Ù…Ù‚Ű§ŰšÙ„Ű© ŰšŰŽÙƒÙ„ Ù…ŰšŰ§ŰŽŰ± للŰșŰȘك:\n"
-"Ù…Ű«Ù„Ű§Ù‹ Ű±ŰšÙ…Ű§ ŰȘكون ŰčŰ±ŰšÙŠŰ§Ù‹ مŰȘÙƒÙ„Ù…Ű§Ù‹ ŰšŰ§Ù„Ù„ŰșŰ© ۧ?Ù†ŰŹÙ„ÙŠŰČÙŠŰ©, Ű±ŰšÙ…Ű§ ŰȘكون Ù„ŰŻÙŠÙƒ\n"
-"Ù„ÙˆŰ­Ű© Ù…ÙŰ§ŰȘÙŠŰ­ ŰłÙˆÙŠŰłŰ±ÙŠŰ©. ۧ۰ۧ كنŰȘ ŰȘŰȘكلم ۧ?Ù†ŰŹÙ„ÙŠŰČÙŠŰ© لكن Ù…ÙˆŰŹÙˆŰŻ في ÙƒÙŠŰšÙƒ, Ű±ŰšÙ…Ű§\n"
-"ŰȘŰŹŰŻ Ù†ÙŰłÙƒ في Ù†ÙŰł Ű§Ù„Ù…ÙˆÙ‚Ù Ű­ÙŠŰ« ? ŰȘŰȘŰ·Ű§ŰšÙ‚ لŰșŰȘك مŰč Ù„ÙˆŰ­Ű© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­.\n"
-"في Ű§Ù„Ű­Ű§Ù„ŰȘين, ŰłŰȘŰłÙ…Ű­ لك ŰźŰ·ÙˆŰ© Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ ŰłŰȘŰłÙ…Ű­ لك ۚۧ۟ŰȘÙŠŰ§Ű±\n"
-"Ù„ÙˆŰ­Ű© Ù…ÙŰ§ŰȘÙŠŰ­ Ù…Ù†Ű§ŰłŰšŰ© من Ű§Ù„Ù‚Ű§ŰŠÙ…Ű©.\n"
-"\n"
-"Ű§Ù†Ù‚Ű± ŰČ۱ \"Ű§Ù„Ù…ŰČÙŠŰŻ\" لŰč۱۶ Ù‚Ű§ŰŠÙ…Ű© ŰšÙƒÙ„ Ù„ÙˆŰ­Ű§ŰȘ Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­\n"
-"Ű§Ù„Ù…ŰŻŰčÙˆÙ…Ű©.\n"
-"\n"
-"ۧ۰ۧ ۧ۟ŰȘ۱ŰȘ Ù„ÙˆŰ­Ű© Ù…ÙŰ§ŰȘÙŠŰ­ Ù„Ű­Ű±ÙˆÙ ŰșÙŠŰ± ?ŰȘÙŠÙ†ÙŠŰ©, ÙŰłÙŠŰłÙ…Ű­ لك\n"
-"Ù…Ű±ŰšŰč Ű§Ù„Ű­ÙˆŰ§Ű± Ű§Ù„ŰȘŰ§Ù„ÙŠ ۚۧ۟ŰȘÙŠŰ§Ű± ۧ۟ŰȘ۔ۧ۱ۧŰȘ Ù„ÙˆŰ­Ű© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­ Ű§Ù„ŰȘي\n"
-"ŰłŰȘŰșÙŠŰ± ÙˆŰ¶Űč Ù„ÙˆŰ­Ű© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­ ŰšÙŠÙ† Ű§Ù„Ű­Ű±ÙˆÙ Ű§Ù„Ù„Ű§ŰȘÙŠÙ†ÙŠŰ© و Ű§Ù„ŰșÙŠŰ± ?ŰȘÙŠÙ†ÙŠŰ©."
+"ۧ۟ŰȘ۱ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš Ű§Ù„Ű°ÙŠ ŰȘŰ±ÙŠŰŻ Ù…Ű­ÙˆÙ‡ لŰȘŰ«ŰšÙŠŰȘ ŰȘŰŹŰČŰŠŰ©\n"
+"Mandrake Linux Ű§Ù„ŰŹŰŻÙŠŰŻŰ©. ۟۰ Ű­Ű°Ű±Ùƒ, كل Ű§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„Ù…ÙˆŰŹÙˆŰŻ Űčليه ŰłŰȘŰ¶ÙŠŰč\n"
+"و لن يمكن ۧ۳ŰȘŰčۧۯŰȘÙ‡Ű§!"
-#: ../../help.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
-"يŰȘم ŰȘÙ†ŰŽÙŠŰ· Ù‡Ű°Ù‡ Ű§Ù„ŰźŰ·ÙˆŰ© ÙÙ‚Ű· ۧ۰ۧ ŰȘم Ű§ÙŠŰŹŰ§ŰŻ ŰȘŰŹŰČŰŠŰ© Ù„ÙŠÙ†ÙƒŰł Ù‚ŰŻÙŠÙ…Ű©\n"
-"Űčلى ŰŹÙ‡Ű§ŰČك.\n"
-"\n"
-"ÙŠŰ­ŰȘۧۏ DrakX ۧ?ن Ű§Ù„Ù‰ ŰŁÙ† يŰčلم ۧ۰ۧ كنŰȘ ŰȘŰ±ÙŠŰŻ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ من Ű§Ù„Ű”ÙŰ± ŰŁÙˆ\n"
-"ŰȘŰ±ÙŠŰŻ ŰȘŰ±Ù‚ÙŠŰ© Ù†ŰžŰ§Ù… Mandrake Linux Ű§Ù„Ù…ÙˆŰŹÙˆŰŻ Ù„ŰŻÙŠÙƒ Ù…ŰłŰšÙ‚Ű§Ù‹:\n"
-"\n"
-" * \"ŰȘŰ«ŰšÙŠŰȘ\": في ۧ?ŰșÙ„Űš ŰȘقوم ۚۧŰČŰ§Ù„Ű© Ű§Ù„Ù†ŰžŰ§Ù… Ű§Ù„Ù‚ŰŻÙŠÙ…\n"
-"ÙƒÙ„ÙŠŰ§Ù‹. ۧ۰ۧ كنŰȘ ŰȘŰ±ÙŠŰŻ ŰȘŰșÙŠÙŠŰ± ŰȘŰŹŰČۊۧŰȘ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš, ŰŁÙˆ ŰȘŰ±ÙŠŰŻ\n"
-"ŰȘŰșÙŠÙŠŰ± Ù†ŰžŰ§Ù… Ű§Ù„Ù…Ù„ÙŰ§ŰȘ, Űčليك ۧ۟ŰȘÙŠŰ§Ű± Ù‡Ű°Ű§ Ű§Ù„ŰźÙŠŰ§Ű±. ŰčÙ…ÙˆÙ…Ű§Ù‹ ۧŰčŰȘÙ…Ű§ŰŻŰ§\n"
-"Űčلى ÙƒÙŠÙÙŠŰ© ŰȘŰŹŰČŰŠŰ© Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš Ù„ŰŻÙŠÙƒ. يمكنك منŰč ۧŰČŰ§Ù„Ű© ŰšŰč۶\n"
-"ŰšÙŠŰ§Ù†Ű§ŰȘك Ű§Ù„Ù…ÙˆŰŹÙˆŰŻŰ© Ù…ŰłŰšÙ‚Ű§Ù‹.\n"
-" * \"ŰȘŰ±Ù‚ÙŠŰ©\": ÙŰŠŰ© Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ Ù‡Ű°Ù‡ ŰȘŰłÙ…Ű­ لك ŰšŰȘŰ­ŰŻÙŠŰ« Ű§Ù„Ű­ŰČم\n"
-"Űčلى Ù†ŰžŰ§Ù… Mandrake Linux Ű§Ù„ŰźŰ§Ű” ŰšÙƒ. لن يŰȘم ŰȘŰșÙŠÙŠŰ±\n"
-"ŰšÙŠŰ§Ù†Ű§ŰȘك ŰŁÙˆ ŰȘÙ‚ŰłÙŠÙ…Ű§ŰȘ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš. ŰŁŰșÙ„Űš ŰźŰ·ÙˆŰ§ŰȘ Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ© ۧ?ŰźŰ±Ù‰\n"
-"Ù„Ű§ ŰȘŰČŰ§Ù„ Ù…ÙˆŰŹÙˆŰŻŰ©, Ù…Ű«Ù„ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ű§ŰčŰȘÙŠŰ§ŰŻÙŠ.\n"
-"\n"
-"ۧ۳ŰȘŰźŰŻŰ§Ù… ŰźÙŠŰ§Ű± ``Ű§Ù„ŰȘŰ±Ù‚ÙŠŰ©'' ÙŠŰŹŰš ŰŁÙ† يŰčمل ŰšŰŽÙƒÙ„ ŰŹÙŠŰŻ Űčلى\n"
-"ۧ۔ۯۧ۱ۧŰȘ Mandrake Linux \"8.1\" ŰŁÙˆ Ù…Ű§ فوق. ? ÙŠÙ†Ű”Ű­ ŰšŰ§Ù„ŰȘŰ±Ù‚ÙŠŰ©\n"
-"من ۧ۔ۧۯ۱ۧŰȘ Mandrake Linux Ù‚ŰšÙ„ \"8.1\"."
+msgid " on parallel port \\#%s"
+msgstr " Űčلى Ű§Ù„Ù…Ù†ÙŰ° Ű§Ù„Ù…ŰȘÙˆŰ§ŰČي \\#%s"
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
-"\"Ű§Ù„ŰšÙ„ŰŻ\": ŰȘŰŁÙƒŰŻ من ۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„ŰšÙ„ŰŻ Ű§Ù„Ű­Ű§Ù„ÙŠ. ۧ۰ۧ لم ŰȘكن في Ù‡Ű°Ű§\n"
-"Ű§Ù„ŰšÙ„ŰŻ, ۧ۶ŰșŰ· Űčلى ŰČ۱ \"ŰȘÙ‡ÙŠŰŠŰ©\" و ۧ۟ŰȘ۱ ŰšÙ„ŰŻŰ§Ù‹ ۹۟۱. ۧ۰ۧ لك ŰȘكن\n"
-"ŰšÙ„ŰŻÙƒ في Ű§Ù„Ù‚Ű§ŰŠÙ…Ű© ۧ۶ŰșŰ· ŰČ۱ \"Ű§Ù„Ù…ŰČÙŠŰŻ\" Ù„Ű„ŰžÙ‡Ű± Ù‚Ű§ŰŠÙ…Ű© ÙƒŰ§Ù…Ù„Ű©\n"
-"ŰšŰ§Ù„ŰšÙ„ŰŻŰ§Ù†."
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "Use the %c and %c keys for selecting which entry is highlighted."
-#: ../../help.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
+msgid "Generic 2 Button Mouse"
+msgstr "Generic 2 Button Mouse"
-#: ../../help.pm:1
+#: ../../lvm.pm:1
#, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
+msgid "Remove the logical volumes first\n"
+msgstr "Ű§Ű­Ű°Ù logical volumes ŰŁÙˆÙ„Ű§Ù‹\n"
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"ŰčÙ†ŰŻ Ù‡Ű°Ù‡ Ű§Ù„Ù†Ù‚Ű·Ű©, ŰłÙŠŰłÙ…Ű­ لك DrakX ۚۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„Ù…ŰłŰȘوى Ű§Ù„ŰŁÙ…Ù†ÙŠ Ű§Ù„Ű°ÙŠ ŰȘ۱ŰșŰš ŰšÙ‡\n"
-"Ù„Ù‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű©. ŰšŰŻÙŠÙ‡ÙŠŰ§Ù‹, ÙŠŰŹŰš ŰȘŰčيين Ù…ŰłŰȘوى ŰŁÙ…Ù†ÙŠ\n"
-"ŰčŰ§Ù„Ù ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű© ŰȘŰ­ŰȘوي Űčلى مŰčÙ„ÙˆÙ…Ű§ŰȘ Ù‡Ű§Ù…Ű©, ŰŁÙˆ ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű©\n"
-"ŰłŰȘÙŰłŰȘŰźŰŻÙ… Ù„Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ. Ű§Ù† ۧ۳ŰȘŰźŰŻŰ§Ù… Ù…ŰłŰȘوى ŰŁÙ…Ù†ÙŠ ŰčŰ§Ù„Ù ÙŠŰŁŰȘي\n"
-"Űčۧۯ۩ Űčلى ۭ۳ۧۚ ŰłÙ‡ÙˆÙ„Ű© Ű§Ù„Ű„ŰłŰȘŰźŰŻŰ§Ù….\n"
-"\n"
-"ۧ۰ۧ لم ŰȘكن ŰȘŰ±ÙŠŰŻ Ű§Ù„Ű„ŰźŰȘÙŠŰ§Ű±, Ű§Ű­ÙŰž Ű§Ù„Ű§ŰźŰȘÙŠŰ§Ű± Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠ."
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "The highlighted entry will be booted automatically in %d seconds."
-#: ../../help.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
msgstr ""
-"في Ű§Ù„ÙˆÙ‚ŰȘ Ű§Ù„Ű°ÙŠ ŰȘقوم فيه ŰšŰȘŰ«ŰšÙŠŰȘ Mandrake Linux, Ù‚ŰŻ يكون ŰȘم ŰȘŰ­ŰŻÙŠŰ«\n"
-"ŰšŰč۶ Ű§Ù„Ű­ŰČم Ù…Ù†Ű° ۧ?۔ۯۧ۱ Ű§Ù„Ù…ŰšŰŻŰŠÙŠ, Ű±ŰšÙ…Ű§ يكون ŰȘم Ű§Ű”Ù„Ű§Ű­ ŰšŰč۶ Ű§Ù„ŰčÙŠÙˆŰš\n"
-"ŰŁÙˆ ŰȘم Ű­Ù„ Ű§Ù„Ù…ŰŽŰ§ÙƒÙ„ ۧ?Ù…Ù†ÙŠŰ©. لكي ŰȘŰłŰȘÙÙŠŰŻ من Ù‡Ű°Ù‡ Ű§Ù„ŰȘŰ­ŰŻÙŠŰ«Ű§ŰȘ,يمكنك\n"
-"ۧ?ن ŰȘنŰČيل Ù‡Ű°Ù‡ Ű§Ù„ŰȘŰ­ŰŻÙŠŰ«Ű§ŰȘ Űčۚ۱ ۧ?نŰȘŰ±Ù†ŰȘ. ۧ۟ŰȘ۱\n"
-"\"نŰčم\" ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ù„ŰŻÙŠÙƒ ÙˆŰ”Ù„Ű© Ű§Ù†ŰȘŰ±Ù†ŰȘ ŰčŰ§Ù…Ù„Ű©, ŰŁÙˆ \"?\" ۧ۰ۧ كنŰȘ ŰȘÙŰ¶Ù„\n"
-"ŰȘŰ«ŰšÙŠŰȘ Ù‡Ű°Ù‡ Ű§Ù„ŰȘŰ­ŰŻÙŠŰ«Ű§ŰȘ ?Ű­Ù‚Ű§Ù‹.\n"
-"\n"
-"ۧ۟ŰȘÙŠŰ§Ű± \"نŰčم\" يŰč۱۶ Ù‚Ű§ŰŠÙ…Ű© ۚۧ?Ù…Ű§ÙƒÙ† Ű§Ù„ŰȘي يمكن Ù…Ù†Ù‡Ű§ Ű§Ù„Ű­Ű”ÙˆÙ„\n"
-"Űčلى Ű§Ù„ŰȘŰ­ŰŻÙŠŰ«Ű§ŰȘ. ۧ۟ŰȘ۱ Ű§Ù„Ù…ÙƒŰ§Ù† Ű§Ù„ŰŁÙ‚Ű±Űš Ű§Ù„ÙŠÙƒ. ŰłÙŠŰȘم Űč۱۶ Ù‚Ű§ŰŠÙ…Ű© ŰšŰ§Ù„Ű­ŰČم\n"
-"۱ۧۏŰč ۧ۟ŰȘÙŠŰ§Ű±Ű§ŰȘك, Ű«Ù… ۧ۶ŰșŰ· \"Ű«ŰšÙ‘ŰȘ\" لŰȘنŰČيل و ŰȘŰ«ŰšÙŠŰȘ\n"
-"Ű§Ù„Ű­ŰČم Ű§Ù„Ù…ŰźŰȘۧ۱۩, ŰŁÙˆ \"Ű§Ù„Űșۧۥ\" ?ۭۚۧ۷ Ű§Ù„ŰȘŰ­ŰŻÙŠŰ«."
+"ŰȘŰč۰۱ŰȘ كŰȘۧۚ۩ /etc/sysconfig/bootsplash\n"
+"لم يŰȘم Ű§ÙŠŰŹŰ§ŰŻ Ű§Ù„Ù…Ù„Ù."
-#: ../../help.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet access"
+msgstr "Ű§Ù„ŰŻŰźÙˆÙ„ Ű§Ù„Ù‰ Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ"
+
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
+"y coordinate of text box\n"
+"in number of characters"
msgstr ""
+"Ű§Ù„Ű„Ű­ŰŻŰ§Ű«ÙŠ Ű§Ù„Ű”Ű§ŰŻÙŠ Ù„Ù„Ű”Ù†ŰŻÙˆÙ‚ Ű§Ù„Ù†Ű”ÙŠ\n"
+"ŰšŰčŰŻŰŻ Ű§Ù„Ű­Ű±ÙˆÙ"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
msgstr ""
+"Ù„Ù„Ű­Ű”ÙˆÙ„ Űčلى Ù‚Ű§ŰŠÙ…Ű© ŰšŰ§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű© Ù„Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„Ù…ŰźŰȘۧ۱۩ ۧ۶ŰșŰ· Űčلى ŰČ۱ \"Ù‚Ű§ŰŠÙ…Ű© "
+"ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„Ű·Ű§ŰšŰčŰ©\"."
-#: ../../help.pm:1
+#: ../../standalone/drakgw:1
#, c-format
+msgid "Enabling servers..."
+msgstr "ŰŹŰ§Ű±ÙŠ ŰȘمكين Ű§Ù„ŰźÙˆŰ§ŰŻÙ…..."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing test page(s)..."
+msgstr "ŰŹŰ§Ű±ÙŠ ۷ۚۧŰčŰ© Ű§Ù„Ű”ÙŰ­Ű§ŰȘ Ű§Ù„Ű„ŰźŰȘŰšŰ§Ű±ÙŠŰ©..."
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "There is already a partition with mount point %s\n"
+msgstr "Ù‡Ù†Ű§Ùƒ ŰȘŰŹŰČŰŠŰ© مŰč Ù†Ù‚Ű·Ű© Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„ %s Ù…ŰłŰšÙ‚Ű§Ù‹\n"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
"At this point, you need to decide where you want to install the Mandrake\n"
"Linux operating system on your hard drive. If your hard drive is empty or\n"
@@ -1987,51 +2051,49 @@ msgid ""
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
msgstr ""
"في Ù‡Ű°Ù‡ Ű§Ù„Ù†Ù‚Ű·Ű©, Űčليك ŰŁÙ† ŰȘÙ‚Ű±Ű± ŰŁÙŠÙ† ŰȘŰ±ÙŠŰŻ ŰȘŰ«ŰšÙŠŰȘ Ù†ŰžŰ§Ù…\n"
"Ű§Ù„ŰȘŰŽŰșيل Mandrake Linux Űčلى Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš Ű§Ù„ŰźŰ§Ű” ŰšÙƒ. ۧ۰ۧ ÙƒŰ§Ù† Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš\n"
@@ -2092,231 +2154,138 @@ msgstr ""
"۱ۧۏŰč Ù‚ŰłÙ… ``ۧۯۧ۱۩ Ű§Ù„ŰȘŰŹŰČۊۧŰȘ'' في\n"
"``ŰŻÙ„ÙŠÙ„ Ű§Ù„Ù…ŰšŰȘŰŻŰŠ''."
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"في Ű§Ù„Ù†Ù‡Ű§ÙŠŰ©, ŰłÙŠŰȘم ŰłŰ€Ű§Ù„Ùƒ Űčن ۧ۰ۧ كنŰȘ ŰȘŰ±ÙŠŰŻ ۚۯۥ Ű§Ù„ÙˆŰ§ŰŹÙ‡Ű© Ű§Ù„Ű±ŰłÙˆÙ…ÙŠŰ©\n"
-"ŰčÙ†ŰŻ ۚۯۥ Ű§Ù„Ù†ŰžŰ§Ù…. Ù„Ű§Ű­Ű· ŰŁÙ†Ù‡ ŰłÙŠŰȘم ŰłŰ€Ű§Ù„Ùƒ Ù‡Ű°Ű§ Ű§Ù„ŰłŰ€Ű§Ù„ Ű­ŰȘى لو ۧ۟ŰȘ۱ŰȘ ŰčŰŻÙ… ۧ۟ŰȘۚۧ۱\n"
-"Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ©, ŰšÙƒÙ„ ÙˆŰ¶ÙˆŰ­, ŰłŰȘŰźŰȘۧ۱ \"Ù„Ű§\" ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ù…Ű§ÙƒÙŠÙ†ŰȘك ŰłŰȘŰłŰȘŰźŰŻÙ… ÙƒŰŹÙ‡Ű§ŰČ\n"
-"ŰźŰ§ŰŻÙ…, ŰŁÙˆ ۧ۰ۧ لم ŰȘÙ†ŰŹŰ­ في ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Űč۱۶\n"
-"ŰšŰŽÙƒÙ„ Ű”Ű­ÙŠŰ­."
+msgid "Ukraine"
+msgstr "ŰŁÙˆÙƒŰ±Ű§Ù†ÙŠŰ§"
-#: ../../help.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
-"ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ù‡Ù†Ű§Ùƒ ŰźŰ§ŰŻÙ…Ű§ŰȘ Ù…ŰźŰȘÙ„ÙŰ© Ù„Ù„ŰšŰ·Ű§Ù‚Ű© Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙƒ, مŰč ŰŁÙˆ\n"
-"ŰŻÙˆÙ† ŰȘŰłŰ±ÙŠŰč Ù„Ù„Ű±ŰłÙˆÙ… Ű«Ù„Ű§Ű«ÙŠŰ© Ű§Ù„ŰŁŰšŰčۧۯ, يمكنك ۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„ŰźŰ§ŰŻÙ… Ű§Ù„Ű°ÙŠ\n"
-"ÙŠÙ†Ű§ŰłŰš ۭۧŰȘÙŠŰ§ŰŹŰ§ŰȘك."
+msgid "Application:"
+msgstr "Ű§Ù„ŰȘŰ·ŰšÙŠÙ‚:"
-#: ../../help.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
-msgstr ""
-"ŰŻÙ‚Ű© Ű§Ù„Űč۱۶\n"
-"\n"
-" يمكنك ۧ۟ŰȘÙŠŰ§Ű± ŰŻÙ‚Ű© Ű§Ù„Űč۱۶ و Űčمق Ű§Ù„ŰŁÙ„ÙˆŰ§Ù† في Ű§Ù„Ű­ŰŻÙˆŰŻ\n"
-"Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű© للŰčŰȘۧۯ. ۧ۟ŰȘ۱ ŰȘلك Ű§Ù„ŰȘي ŰȘÙ†Ű§ŰłŰš ۭۧŰȘÙŠŰ§ŰŹŰ§ŰȘك (Ù„Ű§ ŰȘŰČŰ§Ù„\n"
-"ŰȘŰłŰȘŰ·ÙŠŰč ŰȘŰșÙŠÙŠŰ± ŰȘلك Ű§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ ŰšŰčŰŻ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ). يŰȘم Űč۱۶ ŰčÙŠÙ†Ű©\n"
-"من Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Ù…ŰźŰȘۧ۱۩ Űčلى Ű§Ù„ŰŽŰ§ŰŽŰ©."
+msgid "External ISDN modem"
+msgstr "Ù…ÙˆŰŻÙ… ISDN ŰźŰ§Ű±ŰŹÙŠ"
-#: ../../help.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
-msgstr ""
-"Ű§Ù„ŰŽŰ§ŰŽŰ©\n"
-"\n"
-" يمكن Ù„ŰšŰ±Ù†Ű§Ù…ŰŹ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ Ű§ÙƒŰȘŰŽŰ§Ù و ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰŽŰ§ŰŽŰ© Ű§Ù„Ù…ŰȘŰ”Ù„Ű© ŰšÙ…Ű§ÙƒÙŠÙ†ŰȘك\n"
-"ŰąÙ„ÙŠŰ§Ù‹. Ű§Ù† لم ÙŠŰ”Ù„ Ű°Ù„Ùƒ, يمكنك ۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„ŰŽŰ§ŰŽŰ© Ű§Ù„ŰȘي Ù„ŰŻÙŠÙƒ\n"
-"من Ű§Ù„Ù‚Ű§ŰŠÙ…Ű©."
+msgid "if set to yes, report check result by mail."
+msgstr "if set to yes, report check result by mail."
-#: ../../help.pm:1
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Your choice? (default %s) "
+msgstr "ۧ۟ŰȘÙŠŰ§Ű±Ùƒ ? (default %s) "
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
+msgstr "Ű­Ù„ Ű§Ù„Ù…ŰŽŰ§ÙƒÙ„"
+
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid " / Region"
+msgstr "Ű±ÙŠÙˆÙ†ÙŠÙˆÙ†"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
+"The classic bug sound tester is to run the following commands:\n"
"\n"
-"Monitor\n"
"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
"\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
"\n"
-"Resolution\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+msgstr ""
+"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
-"Test\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
"\n"
-"Options\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
-" You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
-msgstr ""
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
msgstr ""
-"ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű±ŰłÙˆÙ…\n"
-"\n"
-" ŰšŰ±Ù†Ű§Ù…ŰŹ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ يقوم ŰšŰ§ÙƒŰȘŰŽŰ§Ù و ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ù…ÙˆŰŹÙˆŰŻŰ© Űčلى Ù†ŰžŰ§Ù…Ùƒ\n"
-"ŰšŰŽÙƒÙ„ ŰąÙ„ÙŠ. Ű§Ù† لم ÙŠŰ­Ű”Ù„ Ű°Ù„Ùƒ, يمكنك ۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„ŰšŰ·Ű§Ù‚Ű© Ű§Ù„ŰȘي Ù„ŰŻÙŠÙƒ ŰšŰ§Ù„ÙŰčل\n"
-"من Ű§Ù„Ù‚Ű§ŰŠÙ…Ű©.\n"
+"ŰȘم Ű§Ű±ŰłŰ§Ù„ Ű§Ù„Ű”ÙŰ­Ű§ŰȘ Ű§Ù„Ű„ŰźŰȘŰšŰ§Ű±ÙŠŰ© Ű§Ù„Ù‰ Ű§Ù„Ű·Ű§ŰšŰčŰ©.\n"
+"Ù‚ŰŻ ÙŠŰłŰȘŰșŰ±Ù‚ Ù‡Ű°Ű§ ŰšŰč۶ Ű§Ù„ÙˆÙ‚ŰȘ Ű­ŰȘى ŰȘۚۯۣ Ű§Ù„Ű·Ű§ŰšŰčŰ©.\n"
+"Ű­Ű§Ù„Ű© Ű§Ù„Ű·ŰšŰ§ŰčŰ©:\n"
+"%s\n"
"\n"
-" في Ű­Ű§Ù„ ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ù‡Ù†Ű§Ùƒ ŰźŰ§ŰŻÙ…Ű§ŰȘ Ű±ŰłÙˆÙ…ÙŠŰ© Ù…ŰźŰȘÙ„ÙŰ© Ù„ŰšŰ·Ű§Ù‚ŰȘك, مŰč ŰŁÙˆ ŰšŰŻÙˆÙ†\n"
-"ŰȘŰłŰ±ÙŠŰč Ù„Ù„Ű±ŰłÙˆÙ… Ű«Ù„Ű§Ű«ÙŠŰ© Ű§Ù„ŰŁŰšŰčۧۯ, يمكنك في Ù‡Ű°Ù‡ Ű§Ù„Ű­Ű§Ù„ ۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„ŰźŰ§ŰŻÙ… Ű§Ù„Ű°ÙŠ\n"
-"ÙŠÙ†Ű§ŰłŰš ۭۧŰȘÙŠŰ§ŰŹŰ§ŰȘك ŰŁÙƒŰ«Ű±."
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
-msgstr ""
-"يقوم Ù„ÙŠÙ†ÙƒŰł ۚۄۯۧ۱۩ Ű§Ù„ÙˆÙ‚ŰȘ ۭ۳ۚ ŰȘوقيŰȘ ŰșŰ±ÙŠÙ†ŰȘŰŽ Ű«Ù… يŰȘŰ±ŰŹÙ…Ù‡ Ű§Ù„Ù‰\n"
-"Ű§Ù„ŰȘوقيŰȘ Ű§Ù„Ù…Ű­Ù„ÙŠ ۭ۳ۚ Ű§Ù„Ù…Ù†Ű·Ù‚Ű© Ű§Ù„ŰČÙ…Ù†ÙŠŰ© Ű§Ù„ŰȘي ۧ۟ŰȘ۱ŰȘÙ‡Ű§. ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ű§Ù„ŰłŰ§ŰčŰ©\n"
-"Ű§Ù„ŰȘي في Ű§Ù„Ù„ÙˆŰ­Ű© Ű§Ù„Ű±ŰŠÙŠŰłÙŠŰ© Ù…Ű¶ŰšÙˆŰ·Ű© Űčلى Ű§Ù„ŰȘوقيŰȘ Ű§Ù„Ù…Ű­Ù„ÙŠ, يمكنك ۧŰČŰ§Ù„Ű© ŰȘÙ†ŰŽÙŠŰ· Ű°Ù„Ùƒ\n"
-"Űčن Ű·Ű±ÙŠÙ‚ ۧŰČŰ§Ù„Ű© Ű§Ù„ŰȘŰŁŰŽÙŠŰ± من \"۳ۧŰčŰ© Ű§Ù„ŰŹÙ‡Ű§ŰČ Ù…Ű¶ŰšÙˆŰžŰ© Űčلى ŰȘوقيŰȘ ŰșŰ±ÙŠÙ†ŰȘŰŽ\" و Ű§Ù„ŰȘي "
-"ŰłŰȘŰŹŰčل\n"
-"Ù„ÙŠÙ†ÙƒŰł يŰčلم ŰŁÙ† ۳ۧŰčŰ© Ű§Ù„Ù†ŰžŰ§Ù… و ۳ۧŰčŰ© Ű§Ù„ŰŹÙ‡Ű§ŰČ Űčلى Ù†ÙŰł Ű§Ù„ŰȘوقيŰȘ. Ù‡Ű°Ű§\n"
-"Ù…ÙÙŠŰŻ ŰčÙ†ŰŻÙ…Ű§ ŰȘŰłŰȘŰ¶ÙŠÙ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű© Ù†ŰžŰ§Ù… ŰȘŰŽŰșيل ۹۟۱ Ù…Ű«Ù„ Windows.\n"
-"\n"
-"ŰźÙŠŰ§Ű± \"ŰȘŰČŰ§Ù…Ù† ŰąÙ„ÙŠ للوقŰȘ\" ŰłÙŠÙ‚ÙˆÙ… ŰąÙ„ÙŠŰ§Ù‹ ۚ۶ۚ۷ Ű§Ù„ŰłŰ§ŰčŰ© Űčن Ű·Ű±ÙŠÙ‚\n"
-"ۧ?ŰȘŰ”Ű§Ù„ ŰšŰźŰ§ŰŻÙ… وقŰȘ ŰšŰčÙŠŰŻ Űčلى ۧ?نŰȘŰ±Ù†ŰȘ. كي ŰȘŰčمل Ù‡Ű°Ù‡ Ű§Ù„Ù…ÙŠŰČŰ©,\n"
-"ÙŠŰŹŰš ŰŁÙ† ŰȘكون Ù„ŰŻÙŠÙƒ ÙˆŰ”Ù„Ű© Ű§Ù†ŰȘŰ±Ù†ŰȘ ŰčŰ§Ù…Ù„Ű©. من ۧ?ÙŰ¶Ù„ ۧ۟ŰȘÙŠŰ§Ű± ŰźŰ§ŰŻÙ…\n"
-"Ű§Ù„ÙˆÙ‚ŰȘ ۧ?Ù‚Ű±Űš Ű§Ù„ÙŠÙƒ. Ù‡Ű°Ű§ Ű§Ù„ŰźÙŠŰ§Ű± ÙŠŰ«ŰšŰȘ ŰźŰ§ŰŻÙ… وقŰȘ\n"
-"يمكن ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡ Űčن Ű·Ű±ÙŠÙ‚ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű§ŰȘ ۧ?ŰźŰ±Ù‰ Űčلى Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ©."
+msgid "daily"
+msgstr "ÙŠÙˆÙ…ÙŠÙ‘Ű§Ù‹"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Ù‡Ű°Ù‡ Ű§Ù„ŰźŰ·ÙˆŰ© هي ?ŰźŰȘÙŠŰ§Ű± Ű§Ù„ŰźŰŻÙ…Ű§ŰȘ Ű§Ù„ŰȘي ŰłÙŠŰȘم ŰȘŰŽŰșÙŠÙ„Ù‡Ű§ ŰčÙ†ŰŻ ۚۯۥ Ű§Ù„ŰȘŰŽŰșيل.\n"
-"\n"
-"ŰłÙŠÙ‚ÙˆÙ… DrakX ŰšŰč۱۶ Ù‚Ű§ŰŠÙ…Ű© ŰšÙƒÙ„ Ű§Ù„ŰźŰŻÙ…Ű§ŰȘ Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű© في Ù‡Ű°Ű§ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ.\n"
-"۱ۧۏŰč كل ŰźŰŻÙ…Ű© ŰšŰȘمŰčن و قم ۚۄŰČŰ§Ù„Ű© Ű§Ù„ŰȘŰŁŰŽÙŠŰ± من ŰȘلك Ű§Ù„ŰźŰŻÙ…Ű§ŰȘ Ű§Ù„ŰȘي ? ŰȘŰ­ŰȘŰ§ŰŹÙ‡Ű§\n"
-"ŰšŰŽÙƒÙ„ ŰŻŰ§ŰŠÙ… ŰčÙ†ŰŻ ۧ?Ù‚Ù„Ű§Űč.\n"
-"\n"
-"ŰłÙŠŰȘم Űč۱۶ ێ۱ۭ Ù‚Ű”ÙŠŰ± Ű­ÙˆÙ„ Ű§Ù„ŰźŰŻÙ…Ű© ŰčÙ†ŰŻ\n"
-"ۧ۟ŰȘÙŠŰ§Ű±Ù‡Ű§. ŰčÙ…ÙˆÙ…Ű§Ù‹, ۧ۰ۧ لم ŰȘكن مŰȘŰŁÙƒŰŻ Ù…Ű§ ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ű§Ù„ŰźŰŻÙ…Ű© Ù…ÙÙŠŰŻŰ© ŰŁÙ… ?,\n"
-"فمن ۧ?ÙŰ¶Ù„ ŰȘŰ±Ùƒ Ű§Ù„ŰźÙŠŰ§Ű± ۧ?فŰȘŰ±Ű§Ű¶ÙŠ.\n"
-"\n"
-"!! في Ù‡Ű°Ù‡ Ű§Ù„Ù…Ű±Ű­Ù„Ű© كن Ű­Ű°Ű±Ű§Ù ۧ۰ۧ كنŰȘ ŰȘŰ±ÙŠŰŻ ۧ۳ŰȘŰźŰŻŰ§Ù… Ù…Ű§ÙƒÙŠÙ†ŰȘك\n"
-"ÙƒŰźŰ§ŰŻÙ…: Ű±ŰšÙ…Ű§ لن ŰȘŰ±ÙŠŰŻ ۚۯۥ ŰŁÙŠ ŰźŰŻÙ…Ű§ŰȘ ? ŰȘŰ­ŰȘŰ§ŰŹÙ‡Ű§.\n"
-"ÙŰ¶Ù„Ű§Ù‹ ŰȘŰ°ÙƒŰ± ŰŁÙ† Ű§Ù„ŰčŰŻÙŠŰŻ من Ű§Ù„ŰźŰŻÙ…Ű§ŰȘ Ù‚ŰŻ ŰȘكون ۟۷۱۩ ۧ۰ۧ ÙƒŰ§Ù†ŰȘ\n"
-"مŰȘۭۧ۩ Űčلى Ű§Ù„ŰźŰ§ŰŻÙ…. ŰšŰŽÙƒÙ„ ŰčŰ§Ù… ۧ۟ŰȘ۱ ÙÙ‚Ű· Ű§Ù„ŰźŰŻÙ…Ű§ŰȘ Ű§Ù„ŰȘي ŰȘŰ­ŰȘŰ§ŰŹÙ‡Ű§.\n"
-"!!"
+msgid "and one unknown printer"
+msgstr "و ۷ۧۚŰčŰ© ŰșÙŠŰ± مŰčŰ±ÙˆÙŰ©"
-#: ../../help.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
-"\"Ű§Ù„Ű·Ű§ŰšŰčŰ©\": Ű§Ù„Ù†Ù‚Ű± Űčلى \"ŰȘÙ‡ÙŠŰŠŰ©\" ŰłÙŠÙŰȘŰ­ مŰčŰ§Ù„ŰŹ ŰȘÙ‡ÙŠŰŠŰ©\n"
-"Ű§Ù„Ű·Ű§ŰšŰčŰ©. Ű§Ù‚Ű±ŰŁ Ű§Ù„ÙŰ¶Ù„ Ű§Ù„Ù…ŰźŰȘŰ” في ``ŰŻÙ„ÙŠÙ„ Ű§Ù„Ù…ŰšŰȘŰŻŰŠ''\n"
-"لكŰČÙŠŰŻ من Ű§Ù„Ù…ŰčÙ„ÙˆÙ…Ű§ŰȘ Űčن ÙƒÙŠÙÙŠŰ© ۧŰčۯۧۯ ۷ۧۚŰčŰ© ŰŹŰŻÙŠŰŻŰ©. Ű§Ù„ÙˆŰ§ŰŹÙ‡Ű©\n"
-"Ù‡Ù†Ű§Ùƒ Ù…Ù…Ű§Ű«Ù„Ű© لŰȘلك Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…Ű© ŰŁŰ«Ù†Ű§ŰĄ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ."
+msgid "Ireland"
+msgstr "ŰŁÙŠŰ±Ù„Ù†ŰŻŰ§"
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "kernel version"
+msgstr "ۧ۔ۯۧ۱۩ Ű§Ù„Ù„Űš"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid " Restore Configuration "
+msgstr " ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Ű„ŰłŰȘŰčۧۯ۩ "
+
+#: ../../Xconfig/test.pm:1
#, c-format
+msgid "Is this the correct setting?"
+msgstr "هل Ù‡Ű°Ű§ هو Ű§Ù„Ű„Űčۯۧۯ Ű§Ù„Ű”Ű­ÙŠŰ­ŰŸ"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
@@ -2349,4338 +2318,4175 @@ msgstr ""
"``ŰŻÙ„ÙŠÙ„ Ű§Ù„Ù…ŰšŰȘŰŻŰŠ'' للŰȘÙŰ§Ű”ÙŠÙ„ Ű­ÙˆÙ„ Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ©, ŰŁÙˆ ۚۚ۳ۧ۷۩ Ű§Ù†ŰȘ۞۱ Ű­ŰȘى يŰȘم\n"
"ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ù†ŰžŰ§Ù… و ۧ۳ŰȘŰźŰŻÙ… Ű§Ù„ŰšŰ±Ù†Ű§Ù…ŰŹ Ű§Ù„Ù…Ű°ÙƒÙˆŰ± Ù‡Ù†Ű§Ùƒ ?Űčۯۧۯ Ű§Ù„ÙˆŰ”Ù„Ű©."
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
-msgstr ""
-"ŰȘŰ«ŰšÙŠŰȘ Mandrake Linux موŰČŰč Űčلى Ű§Ù„ŰčŰŻÙŠŰŻ من Ű§Ù„ŰŁÙ‚Ű±Ű§Ű”. DrakX\n"
-"يŰčلم ۄ۰ۧ ÙƒŰ§Ù†ŰȘ Ű­ŰČÙ…Ű© Ù…Ű§ في Ù‚Ű±Ű” ۹۟۱ و ŰłÙŠŰźŰ±ŰŹ Ű§Ù„Ù‚Ű±Ű”\n"
-"Ű§Ù„Ű­Ű§Ù„ÙŠ و ŰłÙŠŰ·Ù„Űš منك ŰŁÙ† ŰȘŰŻŰźÙ„ Ù‚Ű±Ű”Ű§Ù‹ Ù…ŰźŰȘÙ„ÙŰ§ ÙƒÙ…Ű§ هو Ù…Ű·Ù„ÙˆŰš."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"في Ű§Ù„ŰŁŰčلى ŰłŰȘŰŹŰŻ ŰȘÙ‚ŰłÙŠÙ…Ű§ŰȘ Ù„ÙŠÙ†ÙƒŰł Ű§Ù„Ù…ÙˆŰŹÙˆŰŻŰ© و Ű§Ù„ŰȘي ŰȘم Ű§ÙŠŰŹŰ§ŰŻÙ‡Ű§ Űčلى Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš "
-"Ű§Ù„ŰźŰ§Ű” ŰšÙƒ.\n"
-"يمكنك ŰŁÙ† ŰȘÙŰšÙ‚ÙŠ Ű„ŰźŰȘÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ, و هي ŰŹÙŠŰŻŰ© Ù„ŰŁŰșÙ„Űš ŰŁÙ†ÙˆŰ§Űč Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ.\n"
-"ۄ۰ۧ قمŰȘ ŰšŰčمل ŰŁÙŠ ŰȘŰșÙŠÙŠŰ±Ű§ŰȘ ÙÙŠŰŹŰš Űčليك ŰŁÙ† ŰȘŰčŰ±Ù Ű§Ù„ŰȘÙ‚ŰłÙŠÙ… Ű§Ù„ŰŹŰ°Ű± (\"/\"). Ù„Ű§ ŰȘŰźŰȘ۱\n"
-"ŰȘÙ‚ŰłÙŠÙ…Ű§ŰȘ ۶ŰșÙŠŰ±Ű© ۏۯۧ و Ű„Ù„Ű§ لن ŰȘŰłŰȘŰ·ÙŠŰč ŰȘŰ«ŰšÙŠŰȘ ŰšŰ±Ű§Ù…ŰŹ ÙƒŰ§ÙÙŠŰ©. ۄ۰ۧ كنŰȘ ŰȘŰ±ÙŠŰŻ ŰȘŰźŰČين "
-"Ű§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ\n"
-"Űčلى ŰȘÙ‚ŰłÙŠÙ… Ù…ŰłŰȘقل ÙŰłŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ Űčمل ŰȘÙ‚ŰłÙŠÙ… لـ\"/home\"\n"
-"(ممكن ÙÙ‚Ű· ۄ۰ۧ ÙƒŰ§Ù† Ù„ŰŻÙŠÙƒ ŰŁÙƒŰ«Ű± من ŰȘÙ‚ŰłÙŠÙ… Ù„Ù„ÙŠÙ†ÙƒŰł).\n"
-"\n"
-"كل ŰȘÙ‚ŰłÙŠÙ… مُŰčŰ·Ù‰ ŰšŰ§Ù„ŰłÙƒÙ„ Ű§Ù„ŰȘŰ§Ù„ÙŠ: \"Ű§Ù„Ű„ŰłÙ…\", \"Ű§Ù„ŰłŰčŰ©\".\n"
-"\n"
-"\"Ű§Ù„Ű„ŰłÙ…\" Ù…Ű±ÙƒŰš ŰšŰ§Ù„ŰłÙƒÙ„ Ű§Ù„ŰȘŰ§Ù„ÙŠ: \"نوŰč Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš\", \"Ű±Ù‚Ù… Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš\",\n"
-"\"Ű±Ù‚Ù… Ű§Ù„ŰȘÙ‚ŰłÙŠÙ…\" (Ù…Ű«Ù„Ű§, \"hda1\").\n"
-"\n"
-"\"Ű±Ù‚Ù… Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš\" ŰŻŰ§ŰŠÙ…Ű§ هو Ű­Ű±Ù ŰšŰčŰŻ \"hd\" ŰŁÙˆ \"sd\". ŰšŰ§Ù„Ù†ŰłŰšŰ© Ù„Ù„ŰŁÙ‚Ű±Ű§Ű” "
-"Ű§Ù„Ű”Ù„ŰšŰ©\n"
-"من نوŰč IDE ÙŰ„Ù†:\n"
-" * \"a\" ŰȘŰčني \"Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš Ű§Ù„ŰŁŰłŰ§ŰłÙŠ Űčلى مŰȘŰ­ÙƒÙ… IDE Ű§Ù„ŰŁŰłŰ§ŰłÙŠ\",\n"
-"\n"
-" * \"b\" ŰȘŰčني \"Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš Ű§Ù„Ű«Ű§Ù†ÙˆÙŠ Űčلى مŰȘŰ­ÙƒÙ… IDE Ű§Ù„ŰŁŰłŰ§ŰłÙŠ\",\n"
-"\n"
-" * \"c\" ŰȘŰčني \"Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš Ű§Ù„ŰŁŰłŰ§ŰłÙŠ Űčلى مŰȘŰ­ÙƒÙ… IDE Ű§Ù„Ű«Ű§Ù†ÙˆÙŠ\",\n"
-"\n"
-" * \"d\" ŰȘŰčني \"Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš Ű§Ù„Ű«Ű§Ù†ÙˆÙŠ Űčلى مŰȘŰ­ÙƒÙ… IDE Ű§Ù„Ű«Ű§Ù†ÙˆÙŠ\",\n"
-"\n"
-"ŰŁÙ…Ű§ ŰšŰ§Ù„Ù†ŰłŰšŰ© Ù„ŰŁÙ‚Ű±Ű§Ű” ŰłÙƒŰČي SCSI ÙŰ§Ù„Ű­Ű±Ù \"a\" يŰčني \"ŰŁÙ‚Ù„ مŰčŰ±Ù SCSI\", و Ű§Ù„Ű­Ű±Ù \"b"
-"\"\n"
-"يŰčني \"Ű«Ű§Ù†ÙŠ ŰŁÙ‚Ù„ مŰčŰ±Ù SCSI\", Ű§Ù„Űź."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
-msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
-msgstr ""
-"Ù‚ŰšÙ„ Ű§Ù„Ù…ŰȘۧۚŰčŰ©, Űčليك Ù‚Ű±Ű§ŰĄŰ© ŰšÙ†ÙˆŰŻ Ű§Ù„ŰȘŰ±ŰźÙŠŰ” ŰŹÙŠŰŻŰ§Ù‹. Ű§Ù†Ù‡Ű§\n"
-"ŰȘŰșŰ·ÙŠ كل ŰȘوŰČيŰčŰ© Mandrake Linux. ۧ۰ۧ كنŰȘ ŰȘÙˆŰ§ÙÙ‚ Űčلى كل Ű§Ù„ŰšÙ†ÙˆŰŻ\n"
-"Ű§Ù„Ù…ÙˆŰŹÙˆŰŻŰ© ÙÙŠÙ‡Ű§, قم ŰšŰ§Ù„ŰȘۣێۚ۱ Űčلى Ű”Ù†ŰŻÙˆÙ‚ \"Ű§Ù‚ŰšÙ„\". Ű§Ù† لم ŰȘÙ‚ŰšÙ„, قم ۚۄŰșÙ„Ű§Ù‚\n"
-"Ű§Ù„ÙƒÙ…ŰšÙŠÙˆŰȘ۱."
-
-#: ../../install2.pm:1
-#, c-format
-msgid "You must also format %s"
-msgstr "Űčليك ŰŁÙŠŰ¶Ű§ ŰȘŰŹÙ‡ÙŠŰČ %s"
-
-#: ../../install2.pm:1
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"ŰȘŰč۰۱ Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ ÙˆŰ­ŰŻŰ§ŰȘ Ű§Ù„Ù†ÙˆŰ§Ű© Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙ†ÙˆŰ§Ű© Ű§Ù„Ù†ŰžŰ§Ù… (Ű§Ù„Ù…Ù„Ù %s Ù…ÙÙ‚ÙˆŰŻ), ŰšŰŽÙƒÙ„ ŰčŰ§Ù… "
-"يŰčني Ù‡Ű°Ű§ ŰŁÙ† Ù‚Ű±Ű” Ű§Ù„Ű„Ù‚Ù„Ű§Űč Ű§Ù„Ù…Ű±Ù† Ù„ÙŠŰł Ù…Ű­ŰŻÙ‘Ű«Ű§Ù‹ مŰč ÙˆŰłÙŠŰ· Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ (ÙŰ¶Ù„Ű§Ù‹ قم ŰšŰ„Ù†ŰŽŰ§ŰĄ Ù‚Ű±Ű” "
-"Ű§Ù‚Ù„Ű§Űč ŰŹŰŻÙŠŰŻ)"
-
-#: ../../install_any.pm:1
-#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Ù„Ù‚ŰŻ ŰžÙ‡Ű± ۟۷ۣ - لم يŰȘم Ű§ÙŠŰŹŰ§ŰŻ ŰŁŰŹÙ‡ŰČŰ© Ű”Ű§Ù„Ű­Ű© يمكن Ű§Ù†ŰŽŰ§ŰĄ ŰŁÙ†ŰžÙ…Ű© Ù…Ù„ÙŰ§ŰȘ ŰŹŰŻÙŠŰŻŰ©. ŰȘŰŁÙƒŰŻ من "
-"Ű§Ù„ŰčŰȘۧۯ Ű§Ù„ŰźŰ§Ű” ŰšÙƒ لمŰčŰ±ÙŰ© ێۚۚ Ù‡Ű°Ù‡ Ű§Ù„Ù…ŰŽÙƒÙ„Ű©"
-
-#: ../../install_any.pm:1 ../../partition_table.pm:1
-#, c-format
-msgid "Error reading file %s"
-msgstr "۟۷ۣ في Ù‚Ű±Ű§ŰĄŰ© Ű§Ù„Ù…Ù„Ù %s"
-
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Ù„Ű§ŰłŰȘŰźŰŻŰ§Ù… ۧ۟ŰȘÙŠŰ§Ű±Ű§ŰȘك Ű§Ù„Ù…Ű­ÙÙˆŰžŰ© Ù„Ù„Ű­ŰČم, قم ۚۚۯۥ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ مŰč ŰźÙŠŰ§Ű± ``linux "
-"defcfg=floppy''"
+msgid "Wizard Configuration"
+msgstr "Ű„ŰčۯۧۯۧŰȘ Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ"
-#: ../../install_any.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "Ù‡Ű°Ű§ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…Ű±Ù† ŰșÙŠŰ± Ù…ŰŹÙ‡ŰČ Űčلى Ù†ŰžŰ§Ù… Ù…Ù„ÙŰ§ŰȘ FAT"
+msgid "Autoprobe"
+msgstr "ŰȘŰ­Ù‚Ù‚ ŰąÙ„ÙŠ"
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "ŰŁŰŻŰźÙ„ Ù‚Ű±Ű” Ù…Ű±Ù† Ù…ŰŹÙ‡ŰČ Űčلى Ù†ŰžŰ§Ù… Ù…Ù„ÙŰ§ŰȘ FAT في Ű§Ù„ŰłÙˆŰ§Ù‚Ű© %s"
+msgid "Backup system files..."
+msgstr "Ű§Ù†ŰłŰź Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ù†ŰžŰ§Ù…..."
#: ../../install_any.pm:1
#, c-format
msgid "Can't use broadcast with no NIS domain"
msgstr "Can't use broadcast with no NIS domain"
-#: ../../install_any.pm:1
-#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-"ŰłÙŠŰȘم Ű­Ű°Ù Ù‡Ű°Ù‡ Ű§Ù„Ű­ŰČم لكي ŰȘŰȘم ŰȘŰ±Ù‚ÙŠŰ© Ű§Ù„Ù†ŰžŰ§Ù…: %s\n"
-"\n"
-"\n"
-"هل ŰȘŰ±ÙŠŰŻ Ű­Ű°Ù Ù‡Ű°Ù‡ Ű§Ù„Ű­ŰČم فŰčÙ„Ű§Ù‹ŰŸ\n"
-
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No"
-msgstr "Ù„Ű§"
+msgid "Removing printer \"%s\"..."
+msgstr "ŰŹŰ§Ű±ÙŠ ۧŰČŰ§Ù„Ű© Ű§Ù„Ű·Ű§ŰšŰčŰ© \"%s\" ..."
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Yes"
-msgstr "نŰčم"
+msgid "drakfloppy"
+msgstr "ŰŻŰ±ÙŠÙƒ Ù„Ù„Ű§Ù‚Ű±Ű§Ű” Ű§Ù„Ù…Ű±Ù†Ű©"
-#: ../../install_any.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
+"Please indicate where the auto_install.cfg file is located.\n"
"\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
-"Do you really want to install these servers?\n"
msgstr ""
-"Ù„Ù‚ŰŻ ۧ۟ŰȘ۱ŰȘ Ű§Ù„ŰźŰ§ŰŻÙ…Ű§ŰȘ Ű§Ù„ŰȘŰ§Ù„ÙŠŰ©: %s\n"
-"\n"
-"\n"
-"Ù‡Ű°Ù‡ Ű§Ù„ŰźŰ§ŰŻÙ…Ű§ŰȘ مفŰčÙ‘Ù„Ű© Ű§ÙŰȘŰ±Ű§Ű¶ÙŠŰ§Ù‹, و Ù„Ű§ ÙŠÙˆŰŹŰŻ لهم Ù…ŰŽŰ§ÙƒÙ„ ŰŁÙ…Ù†ÙŠŰ©\n"
-"مŰčŰ±ÙˆÙŰ©, و لكن Ù‚ŰŻ ŰȘكŰȘŰŽÙ ŰšŰč۶ Ű§Ù„Ù…ŰŽŰ§ÙƒÙ„ Ű§Ù„ŰŹŰŻÙŠŰŻŰ©. في Ù‡Ű°Ù‡ Ű§Ù„Ű­Ű§Ù„Ű©, ŰȘŰŁÙƒŰŻ من ŰŁÙ†\n"
-"ŰȘقوم ŰšŰ§Ù„ŰȘŰ±Ù‚ÙŠŰ© في ŰŁÙ‚Ű±Űš وقŰȘ ممكن.\n"
-"\n"
+"ÙŰ¶Ù„Ű§Ù‹ Ű­ŰŻŰŻ Ù…ÙƒŰ§Ù† ملف auto_install.cfg.\n"
"\n"
-"هل ŰŁÙ†ŰȘ مŰȘŰŁÙƒŰŻ ŰŁÙ†Ùƒ ŰȘŰ±ÙŠŰŻ ŰȘŰ«ŰšÙŠŰȘ Ù‡Ű°Ù‡ Ű§Ù„ŰźŰ§ŰŻÙ…Ű§ŰȘ Ű§Ù„ŰąÙ†ŰŸ\n"
-
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System configuration"
-msgstr "ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Ù†ŰžŰ§Ù…"
-
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System installation"
-msgstr "ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ù†ŰžŰ§Ù…"
+"ۧŰȘŰ±Ùƒ Ű§Ù„Ű­Ù‚Ù„ ÙŰ§Ű±ŰșŰ§Ù‹ ۧ۰ۧ لم ŰȘكن ŰȘŰ±ÙŠŰŻ ۧŰčۧۯ ÙˆŰ¶Űč Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ű§Ù„ÙŠ.\n"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Bringing down the network"
-msgstr "ŰŹŰ§Ű±ÙŠ ۧŰșÙ„Ű§Ù‚ Ű§Ù„ŰŽŰšÙƒŰ©"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "information level that can be obtained through the cpuid instruction"
+msgstr "Ù…ŰłŰȘوى Ű§Ù„Ù…ŰčÙ„ÙˆÙ…Ű§ŰȘ Ű§Ù„ŰȘي يمكن Ű§Ù„Ű­Ű”ÙˆÙ„ ŰčÙ„ÙŠÙ‡Ű§ من ŰȘŰčÙ„ÙŠÙ…Ű§ŰȘ cpuid"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Bringing up the network"
-msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰŽŰșيل Ű§Ù„ŰŽŰšÙƒŰ©"
+msgid "Peru"
+msgstr "ŰšÙŠŰ±Ùˆ"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Partitioning failed: %s"
-msgstr "ÙŰŽÙ„ŰȘ Ű§Ù„ŰȘŰŹŰČŰŠŰ©: %s"
+msgid " on device: %s"
+msgstr " Űčلى Ű§Ù„ŰŹÙ‡Ű§ŰČ: %s"
#: ../../install_interactive.pm:1
#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Űč۫۱ مŰčŰ§Ù„ŰŹ Ű§Ù„ŰȘŰŹŰČŰŠŰ© في DrakX Űčلى Ű§Ù„Ű­Ù„ÙˆÙ„ Ű§Ù„ŰȘŰ§Ù„ÙŠŰ©:"
+msgid "Remove Windows(TM)"
+msgstr "Ű§Ű­Ű°Ù Windows(TM)"
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "I can't find any room for installing"
-msgstr "Ù„Ű§ يمكنني Ű§ÙŠŰŹŰ§ŰŻ Ù…ŰłŰ§Ű­Ű© ÙŰ§Ű±ŰșŰ© للŰȘŰ«ŰšÙŠŰȘ"
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr "ŰȘۚۯۣ ŰźŰ§ŰŻÙ… ŰźŰ·ÙˆŰ· X (Ù‡Ű°Ű§ Ű§Ù„ŰČŰ§Ù…ÙŠ لكي يŰčمل XFree)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
msgstr ""
-"يمكنك Ű§Ù„ŰąÙ† ŰȘŰŹŰČŰŠŰ© %s.\n"
-"ŰčÙ†ŰŻÙ…Ű§ ŰȘنŰȘهي Ù„Ű§ ŰȘÙ†ŰłÙ‰ Ű§Ù„Ű­ÙŰž ۚۧ۳ŰȘŰźŰŻŰ§Ù… `w'"
+"ŰȘم ۧ۳ŰȘ۟۱ۧۏ ŰŁŰșÙ„Űš Ù‡Ű°Ù‡ Ű§Ù„Ù‚ÙŠÙ…\n"
+"من Ű§Ù„Ù†ŰžŰ§Ù….\n"
+"يمكنك Ű§Ù„ŰȘŰčŰŻÙŠÙ„ ۧ۰ۧ ۭۧŰȘŰŹŰȘ Ù„Ű°Ù„Ùƒ."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Use fdisk"
-msgstr "ۧ۳ŰȘŰźŰŻÙ… fdisk"
+msgid "Select the font file or directory and click on 'Add'"
+msgstr "ۧ۟ŰȘ۱ ملف ŰŁÙˆ ŰŻÙ„ÙŠÙ„ Ű§Ù„ŰźŰ·ÙˆŰ· و ۧ۶ŰșŰ· 'Ű§Ű¶Ű§ÙŰ©'"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Custom disk partitioning"
-msgstr "ŰȘŰŹŰČŰŠŰ© Ù…ŰźŰ”Ű”Ű©"
+msgid "Madagascar"
+msgstr "Ù…ŰŻŰșŰŽÙ‚Ű±"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "كل Ű§Ù„ŰȘŰŹŰČۊۧŰȘ و ŰšÙŠŰ§Ù†Ű§ŰȘÙ‡Ű§ ŰłŰȘŰ¶ÙŠŰč من Űčلى Ű§Ù„ŰłÙˆŰ§Ù‚Ű© %s"
+msgid "Urpmi"
+msgstr "Urpmi"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Ù„ŰŻÙŠÙƒ ŰŁÙƒŰ«Ű± من Ù‚Ű±Ű” Ű”Ù„Űš, في ŰŁÙŠÙ‡Ù… ŰȘŰ±ÙŠŰŻ ŰȘŰ«ŰšÙŠŰȘ Ù„ÙŠÙ†ÙƒŰłŰŸ"
+msgid "Cron not available yet as non-root"
+msgstr "Cron ŰșÙŠŰ± مŰȘÙˆÙŰ± Ű­ŰȘى Ű§Ù„ŰąÙ† Ù„Ù„Ù…ŰłŰȘŰźŰŻÙ…ÙŠÙ† ŰșÙŠŰ± Ű§Ù„ŰŹŰ°Ű±"
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Erase entire disk"
-msgstr "Ű§Ù…ŰłŰ­ كل Ű§Ù„Ù‚Ű±Ű”"
+msgid "System"
+msgstr "Ű§Ù„Ù†ŰžŰ§Ù…"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Ű§Ű­Ű°Ù Windows(TM)"
+msgid "Do you want to use this feature?"
+msgstr "هل ŰȘŰ±ÙŠŰŻ ۧ۳ŰȘŰźŰŻŰ§Ù… Ù‡Ű°Ù‡ Ű§Ù„Ù…ÙŠŰČŰ©ŰŸ"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr "Ù„Ű§ ŰȘÙˆŰŹŰŻ ŰȘŰŹŰČŰŠŰ© FAT Ù‚Ű§ŰšÙ„ لŰȘŰșÙŠÙŠŰ± Ű­ŰŹÙ…Ù‡Ű§ (ŰŁÙˆ Ù„Ű§ ŰȘÙˆŰŹŰŻ Ù…ŰłŰ§Ű­Ű© ÙƒŰ§ÙÙŠŰ© مŰȘŰšÙ‚ÙŠŰ©)"
+msgid "Arabic"
+msgstr "Ű§Ù„ŰčŰ±ŰšÙŠŰ©"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"\n"
+"- Options:\n"
msgstr ""
-"للŰȘŰŁÙƒŰŻ من ۔ۭ۩ Ű§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ ŰšŰčŰŻ ۧŰčۧۯ۩ ŰȘŰ­ŰŹÙŠÙ… Ű§Ù„ŰȘŰŹŰČۊۧŰȘ, \n"
-"ŰłÙŠŰȘم Ű§Ù„ŰŻÙ‚ÙŠÙ‚ Űčلى Ù†ŰžŰ§Ù… Ű§Ù„Ù…Ù„ÙŰ§ŰȘ ŰčÙ†ŰŻ Ű§Ù„ŰȘŰŽŰșيل Ű§Ù„Ù‚Ű§ŰŻÙ… لـ Windows(TM)"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "ÙŰŽÙ„ ŰȘŰșÙŠÙŠŰ± Ű­ŰŹÙ… FAT: %s"
+"\n"
+"- ŰźÙŠŰ§Ű±Ű§ŰȘ:\n"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Resizing Windows partition"
-msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰșÙŠÙŠŰ± Ű­ŰŹÙ… ŰȘŰŹŰČŰŠŰ© Windows"
+msgid "Password required"
+msgstr "ÙŠÙŰ­ŰȘۧۏ Ű§Ù„Ù‰ ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ±"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Resizing"
-msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰșÙŠÙŠŰ± Ű§Ù„Ű­ŰŹÙ…"
+msgid "%d minutes"
+msgstr "%d ŰŻÙ‚Ű§ŰŠÙ‚"
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "partition %s"
-msgstr "Ű§Ù„ŰȘŰŹŰČŰŠŰ© %s"
+msgid "Graphics card: %s"
+msgstr "ŰšŰ·Ű§Ù‚Ű© Ű§Ù„ŰŽŰ§ŰŽŰ©: %s"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Űčلى ŰŁÙŠ Ù…ŰłŰ§Ű­Ű© ŰȘŰ±ÙŠŰŻ Ű­ÙŰž Windows"
+msgid "WebDAV transfer failed!"
+msgstr "ÙŰŽÙ„ŰȘ ŰčÙ…Ù„ÙŠŰ© نقل WebDAV!"
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ŰȘŰ­Ű°ÙŠŰ±!\n"
-"\n"
-"DrakX ŰłÙŠÙ‚ÙˆÙ… Ű§Ù„ŰąÙ† ŰšŰȘŰșÙŠÙŠŰ± Ű­ŰŹÙ… ŰȘŰŹŰČŰŠŰ© Windows. كن Ű­Ű°Ű±Ű§Ù‹:\n"
-"Ù‡Ű°Ù‡ Ű§Ù„ŰčÙ…Ù„ÙŠŰ© ۟۷۱۩. ÙŰ„Ű°Ű§ لم ŰȘكن فŰčلŰȘ Ű°Ù„Ùƒ,\n"
-"ÙŠŰŹŰš Űčليك ŰŁÙˆÙ„Ű§Ù‹ Ű§Ù„ŰźŰ±ÙˆŰŹ من Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ, Ű«Ù… ŰŽŰșّل scandisk\n"
-"في Windows (و ۧ۟ŰȘÙŠŰ§Ű±ÙŠŰ§Ù‹ defrag), Ű«Ù… ŰŁŰčŰŻ\n"
-"Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ. ÙŠŰŹŰš Űčليك ÙƒŰ°Ù„Ùƒ Űčمل Ù†ŰłŰźŰ© ۭۧŰȘÙŠŰ§Ű·ÙŠŰ© من ŰšÙŠŰ§Ù†Ű§ŰȘك.\n"
-"ŰčÙ†ŰŻÙ…Ű§ ŰȘكون مŰȘŰŁÙƒŰŻŰ§Ù‹, Ű§Ù†Ù‚Ű± Ù…ÙˆŰ§ÙÙ‚."
+msgid "XFree configuration"
+msgstr "Ű„Űčۯۧۯ XFree"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
-msgstr ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
+msgid "Choose action"
+msgstr "ۧ۟ŰȘ۱ Ű­ŰŻŰ«"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "ŰŹŰ§Ű±ÙŠ ۭ۳ۧۚ Ù…ŰłŰ§Ű­Ű© ŰȘŰŹŰČŰŠŰ© Windows"
+msgid "French Polynesia"
+msgstr "ŰšÙˆÙ„ÙŠÙ†ÙŠŰłÙŠŰ§ Ű§Ù„ÙŰ±Ù†ŰłÙŠŰ©"
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
msgstr ""
-"لم ŰȘŰȘمكن ۣۯۧ۩ ŰȘŰșÙŠÙŠŰ± Ű­ŰŹÙ… FAT من Ű§Ù„ŰȘŰčŰ§Ù…Ù„ مŰč ŰȘŰŹŰČŰŠŰȘك, \n"
-"ŰžÙ‡Ű± Ű§Ù„ŰźŰ·ŰŁ Ű§Ù„ŰȘŰ§Ù„ÙŠ: %s"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "ŰŁÙŠ ŰȘŰŹŰČŰŠŰ© ŰȘŰ±ÙŠŰŻ ŰȘŰșÙŠÙŠŰ± Ű­ŰŹÙ…Ù‡Ű§ŰŸ"
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "ۧ۳ŰȘŰźŰŻÙ… Ű§Ù„Ù…ŰłŰ§Ű­Ű© Ű§Ù„ÙŰ§Ű±ŰșŰ© Űčلى ŰȘŰŹŰČŰŠŰ© Windows"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "ŰŻŰčم ۷ۧۚŰčۧŰȘ OKI 4w و Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…ŰȘÙˆŰ§ÙÙ‚Ű©."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"Ù„Ű§ ŰȘÙˆŰŹŰŻ ŰȘŰŹŰČŰŠŰ© FAT Ù„Ű§ŰłŰȘŰźŰŻŰ§Ù…Ù‡Ű§ كـ loopback (ŰŁÙˆ Ù„Ű§ ŰȘÙˆŰŹŰŻ Ù…ŰłŰ§Ű­Ű© ÙƒŰ§ÙÙŠŰ© مŰȘŰšÙ‚ÙŠŰ©)"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr "ŰȘŰŽŰșّل Ù†ŰžŰ§Ù… Ű§Ù„Ű”ÙˆŰȘ ALSA (Advanced Linux Sound Arachitecture)"
-#: ../../install_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Ű­ŰŹÙ… ŰȘŰŹŰČŰŠŰ© Ű§Ù„ŰȘŰšŰŻÙŠÙ„ ŰšŰ§Ù„Ù…ÙŠŰșŰ§ŰšŰ§ÙŠŰȘ"
+msgid "Installing driver for %s card %s"
+msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰ«ŰšÙŠŰȘ Ù…ŰŽŰșل %s Ù„Ù„ŰšŰ·Ű§Ù‚Ű© %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Root partition size in MB: "
-msgstr "Ű­ŰŹÙ… Ű§Ù„ŰȘŰŹŰČŰŠŰ© Ű§Ù„ŰŹŰ°Ű±ÙŠŰ© ŰšŰ§Ù„Ù…ÙŠŰșŰ§ŰšŰ§ÙŠŰȘ"
+msgid ""
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
+msgstr ""
+"Ù„Ù‚ŰŻ قمŰȘ ŰšÙ†Ù‚Ù„ Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠŰ© Ű§Ù„ŰłŰ§ŰšÙ‚Ű© (\"%s\"), هل ÙŠŰŹŰš ŰŁÙŠŰ¶Ű§Ù‹ ŰŁÙ† ŰȘكون "
+"Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠŰ© ŰȘŰ­ŰȘ Ù†ŰžŰ§Ù… Ű§Ù„Ű·ŰšŰ§ŰčŰ© Ű§Ù„ŰŹŰŻÙŠŰŻ %s۟"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Choose the sizes"
-msgstr "ۧ۟ŰȘ۱ Ű§Ù„ŰŁŰ­ŰŹŰ§Ù…"
+msgid "Enable Server"
+msgstr "مكّن Ű§Ù„ŰźŰ§ŰŻÙ…"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "ŰŁÙŠ ŰȘŰŹŰČŰŠŰ© ŰȘŰ±ÙŠŰŻ ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡Ű§ من ŰŁŰŹÙ„ Linux4Win"
+msgid "Ukrainian"
+msgstr "Ű§Ù„ŰŁÙˆÙƒŰ±Ű§Ù†ÙŠŰ©"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "ۧ۳ŰȘŰźŰŻÙ… ŰȘŰŹŰČŰŠŰ© Windows كـ loopback"
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
+msgstr ""
+"Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ Ű§Ù„ŰŽŰšÙƒŰ© Ù„Ű§ يŰčمل و لم يمكن ŰšŰŻŰ€Ù‡. ÙŰ¶Ù„Ű§Ù‹ ŰȘŰŁÙƒŰŻ من Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ© Ù„ŰŻÙŠÙƒ و Ű§Ù„ŰčŰȘۧۯ "
+"Ű§Ù„ŰźŰ§Ű” ŰšÙƒ. Ű«Ù… Ű­Ű§ÙˆÙ„ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„ŰšŰčÙŠŰŻŰ© Ù…Ű±Ű© ŰŁŰźŰ±Ù‰."
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "There is no existing partition to use"
-msgstr "Ù„Ű§ ŰȘÙˆŰŹŰŻ ŰȘŰŹŰČŰŠŰ© Ù„Ű§ŰłŰȘŰźŰŻŰ§Ù…Ù‡Ű§"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "ÙŰ¶Ù„Ű§Ù‹ ŰŁŰŻŰźÙ„ Ù‚Ű±Ű” Ű§Ù„Ű„Ù‚Ù„Ű§Űč Ű§Ù„Ű°ÙŠ ŰȘŰłŰȘŰźŰŻÙ…Ù‡ في Ű§Ù„ŰłÙˆŰ§Ù‚Ű© %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use existing partitions"
-msgstr "ۧ۳ŰȘŰźŰŻÙ… Ű§Ù„ŰȘŰŹŰČۊۧŰȘ Ű§Ù„Ù…ÙˆŰŹÙˆŰŻŰ©"
+msgid "Local network(s)"
+msgstr "Ű§Ù„ŰŽŰšÙƒŰ©/Ű§Ù„ŰŽŰšÙƒŰ§ŰȘ Ű§Ù„Ù…Ű­Ù„ÙŠŰ©"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Ù„Ű§ ŰȘÙˆŰŹŰŻ Ù…ŰłŰ§Ű­Ű© ÙŰ§Ű±ŰșŰ© لŰčمل Ű§Ù„ŰȘŰŹŰČۊۧŰȘ Ű§Ù„ŰŹŰŻÙŠŰŻŰ©"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
+msgstr "Ű§Ű­Ű°Ù Windows(TM)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Use free space"
-msgstr "ۧ۳ŰȘŰčمل Ű§Ù„Ù…ŰłŰ§Ű­Ű© Ű§Ù„ÙŰ§Ű±ŰșŰ©"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr ""
+"ŰȘمŰȘ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Ù…Ű§ŰłŰ­ Ű§Ù„Ű¶ÙˆŰŠÙŠ %s.\n"
+"يمكنك Ű§Ù„ŰąÙ† Ù…ŰłŰ­ Ű§Ù„Ù…ŰłŰȘÙ†ŰŻŰ§ŰȘ ۚۧ۳ŰȘŰźŰŻŰ§Ù… \"XSane\" من ÙŰ±Űč ÙˆŰłŰ§ŰŠŰ· مŰȘŰčŰŻŰŻŰ©/ŰšŰ±Ű§Ù…ŰŹ Ű±ŰłÙˆÙ…ÙŠŰ© "
+"في Ù‚Ű§ŰŠÙ…Ű© Ű§Ù„ŰȘŰ·ŰšÙŠÙ‚Ű§ŰȘ."
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Ù„ŰŻÙŠÙƒ ŰȘŰŹŰČŰŠŰ© FAT ŰȘم ŰȘŰ­Ù…ÙŠÙ„Ù‡Ű§ Űčلى /boot/efi"
+msgid "Firewire controllers"
+msgstr "مŰȘŰ­ÙƒÙ…Ű§ŰȘ Firewire"
-#: ../../install_interactive.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"You don't have a swap partition.\n"
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
"\n"
-"Continue anyway?"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
msgstr ""
-"Ù„ÙŠŰłŰȘ Ù„ŰŻÙŠÙƒ ŰȘŰŹŰČŰŠŰ© ŰȘŰšŰŻÙŠÙ„.\n"
+"ŰšŰčŰŻÙ…Ű§ قمŰȘ ŰšŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Ù…ŰčŰ§Ù…?ŰȘ Ű§Ù„ŰčŰ§Ù…Ű© Ù„Ù…Ű­Ù…Ù‘Ù„ ۧ?Ù‚Ù„Ű§Űč, ÙŰłÙŠŰȘم\n"
+"Űč۱۶ Ù‚Ű§ŰŠÙ…Ű© ŰźÙŠŰ§Ű±Ű§ŰȘ ۧ?Ù‚Ù„Ű§Űč Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű© ŰčÙ†ŰŻ ۚۯۥ Ű§Ù„ŰȘŰŽŰșيل.\n"
"\n"
-"هل ŰȘŰ±ÙŠŰŻ Ű§Ù„Ù…ŰȘۧۚŰčŰ© Űčلى ŰŁÙŠ Ű­Ű§Ù„ŰŸ"
+"ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ù‡Ù†Ű§Ùƒ ŰŁÙ†ŰžÙ…Ű© ŰȘŰŽŰșيل ŰŁŰźŰ±Ù‰ Ù…Ű«ŰšŰȘŰ© Űčلى Ù…Ű§ÙƒÙŠÙ†ŰȘك ÙŰłÙŠŰȘم Ű§Ű¶Ű§ÙŰȘÙ‡Ű§\n"
+"ŰąÙ„ÙŠŰ§Ù‹ Ű§Ù„Ù‰ Ù‚Ű§ŰŠÙ…Ű© ۧ?Ù‚Ù„Ű§Űč. يمكنك Ű§Ù„ŰȘŰ­ÙƒÙ… ŰšŰ§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ\n"
+"Ű§Ù„Ù…ÙˆŰŹÙˆŰŻŰ© ŰšÙ†Ù‚Ű± \"Ű§Ű¶Ù\" ?Ù†ŰŽŰ§ŰĄ Ù…ŰŻŰźÙ„ ŰŹŰŻÙŠŰŻ, و ۧ۟ŰȘÙŠŰ§Ű± Ù…ŰŻŰźÙ„ و\n"
+"Ù†Ù‚Ű± \"ŰȘŰčŰŻÙŠÙ„\" ŰŁÙˆ \"Ű­Ű°Ù\" لŰȘŰčŰŻÙŠÙ„ ŰŁÙˆ Ű­Ű°Ù Ű§Ù„Ù…ŰŻŰźÙ„. \"Ù…ÙˆŰ§ÙÙ‚\" يŰȘŰŁÙƒŰŻ\n"
+"من ŰȘŰșÙŠÙŠŰ±Ű§ŰȘك.\n"
+"\n"
+"Ű±ŰšÙ…Ű§ ? ŰȘŰ±ÙŠŰŻ ?ي ێ۟۔ يŰȘمكن من ۧŰčۧۯ۩ ŰȘŰŽŰșيل Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű© ŰŁÙ† ÙŠŰłŰȘŰ·ÙŠŰč\n"
+"Ű§Ù„ÙˆŰ”Ù„ Ű§Ù„Ù‰ ŰŁÙ†ŰžÙ…Ű© Ű§Ù„ŰȘŰŽŰșيل ۧ?ŰźŰ±Ù‰. يمكنك Ű­Ű°Ù Ű§Ù„Ù…ŰŻŰ§ŰźÙ„ Ű§Ù„Ù…Ù‚Ű§ŰšÙ„Ű©\n"
+"?Ù†ŰžÙ…Ű© Ű§Ù„ŰȘŰŽŰșيل Ù„Ű­Ű°ÙÙ‡Ű§ من Ù‚Ű§ŰŠÙ…Ű© Ù…Ű­Ù…Ù‘Ù„ ۧ?Ù‚Ù„Ű§Űč, لكن في Ù‡Ű°Ù‡ Ű§Ù„Ű­Ű§Ù„Ű© ŰłŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ Ù‚Ű±Ű”\n"
+"Ù…Ű±Ù† Ù„Ù„Ű„Ù‚?Űč كي ŰȘŰȘمكن من Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ ŰŁÙ†ŰžÙ…Ű©\n"
+"Ű§Ù„ŰȘŰŽŰșيل ۧ?ŰźŰ±Ù‰!"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"ÙŠŰŹŰš ŰŁÙ† ŰȘكون Ù„ŰŻÙŠÙƒ ŰȘŰŹŰČŰŠŰ© ŰŹŰ°Ű±ÙŠŰ©.\n"
-"Ù„Ù‡Ű°Ű§ Ű§Ù„Űș۱۶ Ű§Ù†ŰŽŰŠ ŰȘŰŹŰČŰŠŰ© (ŰŁÙˆ Ű§Ù†Ù‚Ű± Űčلى ŰȘŰŹŰČŰŠŰ© Ù…ÙˆŰŹÙˆŰŻŰ©).\n"
-"Ű«Ù… ۧ۟ŰȘ۱ ``Ù†Ù‚Ű·Ű© Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„'' و ۧۏŰčÙ„Ù‡Ű§ `/'"
+msgid "System mode"
+msgstr "ÙˆŰ¶Űč Ű§Ù„Ù†ŰžŰ§Ù…"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
msgstr ""
-"ŰšŰč۶ Ű§Ù„ŰčŰȘۧۯ Ű§Ù„Ù…ÙˆŰŹÙˆŰŻ Űčلى ŰŹÙ‡Ű§ŰČك ÙŠŰ­ŰȘۧۏ Ű§Ù„Ù‰ Ù…ŰŽŰșÙ„Ű§ŰȘ ``ŰȘŰŹŰ§Ű±ÙŠŰ©'' كي ŰȘŰčمل.\n"
-"يمكنك Ű§ÙŠŰŹŰ§ŰŻ مŰČÙŠŰŻ من Ű§Ù„Ù…ŰčÙ„ÙˆÙ…Ű§ŰȘ ŰčÙ†Ù‡Ű§ في: %s"
+"Ù„Ù„Ű·ŰšŰ§ŰčŰ© Űčلى ۷ۧۚŰčŰ© NetWare, ŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ ۧŰč۷ۧۥ Ű§ŰłÙ… ŰźŰ§ŰŻÙ… ۷ۚۧŰčŰ© NetWare (Ù„Ű§Ű­Ű· ŰŁÙ†Ù‡ "
+"Ù‚ŰŻ ÙŠŰźŰȘلف Űčن Ű§ŰłÙ… Ù…ŰłŰȘŰ¶ÙŠÙ TCP/IP!) ŰšŰ§Ù„Ű„Ű¶Ű§ÙŰ© Ű§Ù„Ù‰ Ű§ŰłÙ… Ű§Ù„Ű”Ù Ù„Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„ŰȘي ۱ŰșŰš في "
+"Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„ÙŠÙ‡Ű§ ŰšŰ§Ù„Ű„Ű¶Ű§ÙŰ© Ű§Ù„Ù‰ Ű§ŰłÙ… Ù…ŰłŰȘŰźŰŻÙ… و ÙƒÙ„Ù…Ű© Ù…Ű±ÙˆŰ± Ù…Ù†Ű§ŰłŰšŰȘين."
-#: ../../install_messages.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"ŰȘÙ‡Ű§Ù†ÙŠÙ†Ű§, Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ Ù‚ŰŻ Ű§Ù†ŰȘهى.\n"
-"Ű§Ű­Ű°Ù ÙˆŰłÙŠŰ· Ű§Ù„Ű„Ù‚Ù„Ű§Űč و ۧ۶ŰșŰ· ŰČ۱ Ű§ŰŻŰźÙ„ Ù„Ű„Űčۧۯ۩ Ű§Ù„ŰȘŰŽŰșيل.\n"
-"\n"
-"\n"
-"لمŰčÙ„ÙˆÙ…Ű§ŰȘ Ű­ÙˆÙ„ Ű§Ù„Ű„Ű”Ù„Ű§Ű­Ű§ŰȘ Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű© Ù„Ù‡Ű°Ű§ Ű§Ù„Ű„Ű”ŰŻŰ§Ű± من Mandrake Linux,\n"
-"ŰČ۱ Ű”ÙŰ­Ű© ŰȘŰ”Ű­ÙŠŰ­ Ű§Ù„ŰŁŰźŰ·Ű§ŰĄ Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű© من:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Ű§Ù„Ù…ŰčÙ„ÙˆÙ…Ű§ŰȘ Ű­ÙˆÙ„ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Ù†ŰžŰ§Ù… مŰȘÙˆÙŰ±Ű© في ÙŰ”Ù„\n"
-"Ù…Ű§ ŰšŰčŰŻ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ في ŰŻÙ„ÙŠÙ„ Ù…ŰłŰȘŰźŰŻÙ… Mandrake Ű§Ù„Ű±ŰłÙ…ÙŠ."
+msgid "Netmask:"
+msgstr "Netmask:"
-#: ../../install_messages.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr "http://www.mandrakelinux.com/en/91errata.php3"
+msgid "Append"
+msgstr "Ű§Ù„Ű­Ű§Ù‚"
-#: ../../install_messages.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr "ŰŁŰčŰŻ ŰȘŰ­Ù…ÙŠÙ„ Ù‚Ű§ŰŠÙ…Ű© Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ (لŰč۱۶ كل ۷ۧۚŰčۧŰȘ CUPS Ű§Ù„ŰšŰčÙŠŰŻŰ© Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű©)"
-#: ../../install_messages.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
-"2. Limited Warranty\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
+msgstr ""
+"ŰčÙ†ŰŻ ŰȘŰŽŰșيل Ù‡Ű°Ű§ Ű§Ù„ŰźÙŠŰ§Ű±, فŰčÙ†ŰŻ كل ŰšŰŻŰ§ÙŠŰ© ŰȘŰŽŰșيل لـCUPS ŰłÙŠŰȘم Ű§Ù„ŰȘŰŁÙƒŰŻ ŰąÙ„ÙŠŰ§Ù‹ من Ù…Ű§\n"
"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
+"- ۧ۰ۧ ÙƒŰ§Ù† LPD/LPRng Ù…Ű«ŰšŰȘŰ§Ù‹, لن ŰȘŰȘم Ű§Ù„ÙƒŰȘۧۚ۩ فوق /etc/printcap Űčن Ű·Ű±ÙŠÙ‚ CUPS\n"
"\n"
+"- ۧ۰ۧ ÙƒŰ§Ù† /etc/cups/cupsd.conf Ù…ÙÙ‚ÙˆŰŻ, ŰłÙŠŰȘم Ű§Ù†ŰŽŰ§Ű€Ù‡ في Ù‡Ű°Ù‡ Ű§Ù„Ű­Ű§Ù„\n"
"\n"
-"3. The GPL License and Related Licenses\n"
+"- ۧ۰ۧ ÙƒŰ§Ù†ŰȘ مŰčÙ„ÙˆÙ…Ű§ŰȘ Ű§Ù„Ű·ŰšŰ§ŰčŰ© Ù…Ù†ŰŽÙˆŰ±Ű©, ŰŁÙŠ ŰŁÙ†Ù‡Ű§ Ù„Ű§ ŰȘŰ­ŰȘوي \"localhost\" ÙƒŰ„ŰłÙ… "
+"Ù„Ù„ŰźŰ§ŰŻÙ….\n"
"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
+"ۧ۰ۧ ÙƒŰ§Ù†ŰȘ ŰšŰč۶ Ù‡Ű°Ù‡ Ű§Ù„Ű„ŰŹŰ±Ű§ŰĄŰ§ŰȘ Ù‚ŰŻ ŰȘ۳ۚۚŰȘ ŰšÙ…ŰŽŰ§ÙƒÙ„ لك, ŰčŰ·Ù‘Ù„ Ù‡Ű°Ű§ Ű§Ù„ŰźÙŠŰ§Ű±, لكن في Ù‡Ű°Ù‡ "
+"Ű§Ù„Ű­Ű§Ù„ Űčليك Ű§Ù„Ű„Ù†ŰȘŰšŰ§Ù‡ Ù„Ù‡Ű°Ù‡ Ű§Ù„Ù†Ù‚Ű§Ű·."
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid ""
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
-"4. Intellectual Property Rights\n"
+"It also provides a much higher API than OSS.\n"
"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
+msgstr ""
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
-"5. Governing Laws \n"
+"It also provides a much higher API than OSS.\n"
"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-msgstr ""
-
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Entering step `%s'\n"
-
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Help"
-msgstr "Ù…ŰłŰ§ŰčŰŻŰ©"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "not configured"
-msgstr "ŰșÙŠŰ± مŰčŰŻÙ‘"
-
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
-#, c-format
-msgid "Configure"
-msgstr "Ű„Űčۯۧۯ"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Go on anyway?"
-msgstr "هل ŰȘŰ±ÙŠŰŻ Ű§Ù„Ù…ŰȘۧۚŰčŰ© Űčلى ŰŁÙŠ Ű­Ű§Ù„ŰŸ"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "ÙƒŰ§Ù† Ù‡Ù†Ű§Ùƒ ۟۷ۣ في ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ű­ŰČم:"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr "ÙƒŰ§Ù† Ù‡Ù†Ű§Ùƒ ۟۷ۣ في ŰȘ۱ŰȘÙŠŰš Ű§Ù„Ű­ŰČم:"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Change your Cd-Rom!\n"
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
+"You may prefer to replay the installation.\n"
msgstr ""
-"ŰșÙŠŰ± Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹ!\n"
+"Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„ŰąÙ„ÙŠ Ù‚ŰŻ يŰȘم ŰšŰŽÙƒÙ„ ŰȘÙ„Ù‚Ű§ŰŠÙŠ ۧ۰ۧ ۣ۱ۯŰȘ Ű°Ù„Ùƒ,\n"
+"في Ù‡Ű°Ù‡ Ű§Ù„Ű­Ű§Ù„Ű© ŰłÙŠŰłŰȘولي Űčلى كل Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš Ù„ŰŻÙŠÙƒ!!\n"
+"(Ù‡Ű°Ű§ ŰšŰ§Ù„Ù†ŰłŰšŰ© للŰȘŰ«ŰšÙŠŰȘ Űčلى ŰŹÙ‡Ű§ŰČ ŰąŰźŰ±).\n"
"\n"
-"ÙŰ¶Ù„Ű§Ù‹ ŰŁŰŻŰźÙ„ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹ Ű§Ù„Ù…ŰłÙ…Ù‰ \"%s\" في Ű§Ù„ŰłÙˆŰ§Ù‚Ű© و Ű§Ù†Ù‚Ű± Ù…ÙˆŰ§ÙÙ‚ ŰčÙ†ŰŻÙ…Ű§ ŰȘنŰȘهي.\n"
-"ۧ۰ۧ لم يكن Ű§Ù„Ù‚Ű±Ű” Ù„ŰŻÙŠÙƒ, ۧ۶ŰșŰ· Ű§Ù„Űșۧۥ لŰȘŰŹÙ†Űš Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ من Ù‡Ű°Ű§ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹ."
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Refuse"
-msgstr "Ű§Ű±ÙŰ¶"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Accept"
-msgstr "Ű§Ù‚ŰšÙ„"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Installing package %s"
-msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ű­ŰČÙ…Ű© %s"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "%d packages"
-msgstr "%d Ű­ŰČم"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "No details"
-msgstr "Ù„Ű§ ŰȘÙŰ§Ű”ÙŠÙ„"
+"Ű±ŰšÙ…Ű§ ŰȘÙŰ¶Ù„ ۧŰčۧۯ۩ ŰčÙ…Ù„ÙŠŰ© Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ.\n"
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Details"
-msgstr "ŰȘÙŰ§Ű”ÙŠÙ„"
+msgid "Network printer \"%s\", port %s"
+msgstr "۷ۧۚŰčŰ© ŰŽŰšÙƒŰ© \"%s\", Ű§Ù„Ù…Ù†ÙŰ° %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Ű§Ù†ŰȘ۱ من ÙŰ¶Ù„Ùƒ, ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰȘŰ­Ű¶ÙŠŰ± للŰȘŰ«ŰšÙŠŰȘ..."
+msgid ""
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
+msgstr "ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ Ù…ÙˆŰ§ŰŠÙ… Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ű°ÙŠ ŰłÙŠŰȘم ŰšÙ‡ Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ©."
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Time remaining "
-msgstr "Ű§Ù„ÙˆÙ‚ŰȘ Ű§Ù„Ù…ŰȘŰšÙ‚ÙŠ"
+msgid "OK to restore the other files."
+msgstr "ۧ۶ŰșŰ· Ù…ÙˆŰ§ÙÙ‚ Ù„Ű§ŰłŰȘŰčۧۯ۩ Ù…Ù„ÙŰ§ŰȘ Ű§ŰźŰ±Ù‰"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Estimating"
-msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„Ű­ŰłŰ§Űš Ű§Ù„ŰȘÙ‚Ű±ÙŠŰšÙŠ"
+msgid "Please choose your keyboard layout."
+msgstr "۱ۏۧۥ, ۧ۟ŰȘ۱ Ù„ÙˆŰ­Ű© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­."
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Installing"
-msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ"
+msgid "Printer Device URI"
+msgstr "URI ŰŹÙ‡Ű§ŰČ Ű§Ù„Ű·Ű§ŰšŰčŰ©"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose the packages you want to install"
-msgstr "ۧ۟ŰȘ۱ Ű§Ù„Ű­ŰČم Ű§Ù„ŰȘي ŰȘŰ±ÙŠŰŻ ŰȘŰ«ŰšÙŠŰȘÙ‡Ű§"
+msgid "Not erasable media!"
+msgstr "ÙˆŰłÙŠŰ· ŰșÙŠŰ± Ù‚Ű§ŰšÙ„ Ù„Ù„Ù…ŰłŰ­!"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Minimal install"
-msgstr "ŰȘŰ«ŰšÙŠŰȘ Ù…Ű”ŰșÙ‘Ű±"
+msgid "Terminal-based"
+msgstr "Terminal-based"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Updating package selection"
-msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰ­ŰŻÙŠŰ« ۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„Ű­ŰČم"
+msgid "Installing a printing system in the %s security level"
+msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰ«ŰšÙŠŰȘ Ù†ŰžŰ§Ù… ۷ۚۧŰčŰ© في Ù…ŰłŰȘوى Ű§Ù„ŰŁÙ…Ù† %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Load/Save on floppy"
-msgstr "Ű­Ù…Ù‘Ù„/Ű§Ű­ÙŰž Űčلى Ù‚Ű±Ű” Ù…Ű±Ù†"
+msgid "The user name is too long"
+msgstr "Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… Ű·ÙˆÙŠÙ„ ŰŹŰŻŰ§Ù‹"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "<- Previous"
-msgstr "<- Ű§Ù„ŰłŰ§ŰšÙ‚ "
+msgid "Other OS (windows...)"
+msgstr "Ù†ŰžŰ§Ù… ۹۟۱ (Windows...)"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Install"
-msgstr "Ű«ŰšÙ‘ŰȘ"
+msgid "WebDAV remote site already in sync!"
+msgstr "موقŰč WebDAV Ű§Ù„ŰšŰčÙŠŰŻ مŰȘŰČŰ§Ù…Ù† Ù…ŰłŰšÙ‚Ű§Ù‹!"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Show automatically selected packages"
-msgstr "ŰŁŰžÙ‡Ű± Ű§Ù„Ű­ŰČم Ű§Ù„Ù…ŰźŰȘۧ۱۩ ŰŁÙ„ÙŠŰ§Ù‹"
+msgid "Reading printer database..."
+msgstr "ŰŹŰ§Ű±ÙŠ Ù‚Ű±Ű§ŰĄŰ© Ù‚Ű§ŰčŰŻŰ© ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ..."
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Ù„Ű§ يمكنك ۧŰČŰ§Ù„Ű© ۧ۟ŰȘÙŠŰ§Ű± Ù‡Ű°Ù‡ Ű§Ù„Ű­ŰČÙ…Ű©. ÙŠŰŹŰš ŰȘŰ±Ù‚ÙŠŰȘÙ‡Ű§"
+msgid "Generate auto install floppy"
+msgstr "Ű§Ù†ŰŽŰŠ Ù‚Ű±Ű” ŰȘŰ«ŰšÙŠŰȘ ŰąÙ„ÙŠ"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
msgstr ""
-"ÙŠŰŹŰš ŰȘŰ±Ù‚ÙŠŰ© Ù‡Ű°Ù‡ Ű§Ù„Ű­ŰČÙ…Ű©.\n"
-"هل ŰŁÙ†ŰȘ مŰȘŰŁÙƒŰŻ ŰŁÙ†Ùƒ Ù„Ű§ ŰȘŰ±ÙŠŰŻ ۧ۟ŰȘÙŠŰ§Ű±Ù‡Ű§ŰŸ"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "Ù„Ű§ يمكن ۧŰČŰ§Ù„Ű© ۧ۟ŰȘÙŠŰ§Ű± Ù‡Ű°Ù‡ Ű§Ù„Ű­ŰČم. Ű§Ù†Ù‡Ű§ Ù…Ű«ŰšŰȘŰ© Ù…ŰłŰšÙ‚Ű§Ù‹"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Ù‡Ű°Ù‡ Ű§Ù„Ű­ŰČÙ…Ű© Ű§Ù„ŰČŰ§Ù…ÙŠŰ©, Ù„Ű§ يمكن ŰčŰŻÙ… ۧ۟ŰȘÙŠŰ§Ű±Ù‡Ű§"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't select/unselect this package"
-msgstr "Ù„Ű§ يمكنك ۧ۟ŰȘÙŠŰ§Ű±/ۧŰČŰ§Ù„Ű© ۧ۟ŰȘÙŠŰ§Ű± Ù‡Ű°Ù‡ Ű§Ù„Ű­ŰČÙ…Ű©"
+"\t\t Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…: %s\n"
+"\t\t Űčلى Ű§Ù„Ù…ŰłŰ§Ű±: %s\n"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The following packages are going to be removed"
-msgstr "ŰłÙŠŰȘم Ű­Ű°Ù Ű§Ù„Ű­ŰČم Ű§Ù„ŰȘŰ§Ù„ÙŠŰ©"
+msgid "Somalia"
+msgstr "Ű§Ù„Ű”ÙˆÙ…Ű§Ù„"
-#: ../../install_steps_gtk.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "The following packages are going to be installed"
-msgstr "ŰłÙŠŰȘم ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ű­ŰČم Ű§Ù„ŰȘŰ§Ù„ÙŠŰ©"
+msgid "No open source driver"
+msgstr "Ù„Ű§ ÙŠÙˆŰŹŰŻ Ù…ŰŽŰșل مفŰȘÙˆŰ­ Ű§Ù„Ù…Ű”ŰŻŰ±"
-#: ../../install_steps_gtk.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Ù„Ű§ يمكنك ۧ۟ŰȘÙŠŰ§Ű± Ù‡Ű°Ù‡ Ű§Ù„Ű­ŰČÙ…Ű© Ù„ŰŁÙ†Ù‡ Ù„Ű§ ÙŠÙˆŰŹŰŻ Ù…ŰłŰ§Ű­Ű© ÙƒŰ§ÙÙŠŰ© مŰȘŰšÙ‚ÙŠŰ© لŰȘŰ«ŰšÙŠŰȘÙ‡Ű§"
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
+msgstr ""
+"Ù‡Ű°Ű§ Ù…Ù…Ű§Ű«Ù„ Ù„Ù„Ù…ŰłŰȘوى Ű§Ù„ŰłŰ§ŰšÙ‚, و لكن Ű§Ù„Ù†ŰžŰ§Ù… مŰșلق ÙƒÙ„ÙŠŰ§Ù‹ و Ű§Ù„Ù…ŰČŰ§ÙŠŰ§ Ű§Ù„ŰŁÙ…Ù†ÙŠ Űčلى Ű­ŰŻÙ‡Ű§ "
+"Ű§Ù„ŰŁÙ‚Ű”Ù‰."
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Importance: %s\n"
-msgstr "Ű§Ù„ŰŁÙ‡Ù…ÙŠŰ©: %s\n"
+msgid "Nicaragua"
+msgstr "Ù†ÙŠÙƒŰ§Ű±Ű§ŰșÙˆŰ§"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Size: %d KB\n"
-msgstr "Ű§Ù„Ű­ŰŹÙ…: %d ÙƒÙŠÙ„ÙˆŰšŰ§ÙŠŰȘ\n"
+msgid "New Caledonia"
+msgstr "Ù†ÙŠÙˆÙƒŰ§Ù„ÙŠŰŻÙˆÙ†ÙŠŰ§"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Version: %s\n"
-msgstr "Ű§Ù„Ű„Ű”ŰŻŰ§Ű±: %s\n"
+msgid "European protocol (EDSS1)"
+msgstr "Ű§Ù„ŰšŰ±ÙˆŰȘوكول Ű§Ù„ŰŁÙˆŰ±ÙˆŰšÙŠ (EDSS1)"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Name: %s\n"
-msgstr "Ű§Ù„Ű„ŰłÙ…: %s\n"
+msgid "Video mode"
+msgstr "ÙˆŰ¶ŰčÙŠŰ© Ű§Ù„ÙÙŠŰŻÙŠÙˆ"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bad package"
-msgstr "Ű­ŰČÙ…Ű© ŰłÙŠŰŠŰ©"
+msgid "Please enter your email address below "
+msgstr "ÙŰ¶Ù„Ű§Ù‹ ŰŁŰŻŰźÙ„ ŰčÙ†ÙˆŰ§Ù† ŰšŰ±ÙŠŰŻÙƒ Ű§Ù„ŰŁÙ„ÙƒŰȘŰ±ÙˆÙ†ÙŠ ŰŁŰŻÙ†Ű§Ù‡ "
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other"
-msgstr "ŰŁŰźŰ±Ù‰"
+msgid "Oman"
+msgstr "ŰčÙ…Ű§Ù†"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Ű§Ù„Ű­ŰŹÙ… Ű§Ù„Ű„ŰŹÙ…Ű§Ù„ÙŠ: %d / %d ميŰșŰ§ŰšŰ§ÙŠŰȘ"
+msgid "Network Monitoring"
+msgstr "Ù…Ű±Ű§Ù‚ŰšŰ© Ű§Ù„ŰŽŰšÙƒŰ©"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Next ->"
-msgstr "Ű§Ù„ŰȘŰ§Ù„ÙŠ ->"
+msgid "SunOS"
+msgstr "SunOS"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Individual package selection"
-msgstr "ۧ۟ŰȘÙŠŰ§Ű± Ù…ÙŰ±ŰŻ Ù„Ù„Ű­ŰČم"
+msgid "New size in MB: "
+msgstr "Ű§Ù„Ű­ŰŹÙ… Ű§Ù„ŰŹŰŻÙŠŰŻ ŰšŰ§Ù„Ù…ÙŠŰșŰ§ŰšŰ§ÙŠŰȘ: "
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Package Group Selection"
-msgstr "ۧ۟ŰȘÙŠŰ§Ű± Ù…ŰŹÙ…ÙˆŰčۧŰȘ Ű§Ù„Ű­ŰČم"
+msgid "Partition table type: %s\n"
+msgstr "نوŰč ŰŹŰŻÙˆÙ„ Ű§Ù„ŰȘÙ‚ŰłÙŠÙ…: %s\n"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Ű§Ù„Ù†ŰžŰ§Ù… Ù„ŰŻÙŠÙƒ قليل Ű§Ù„Ù…ÙˆŰ§Ű±ŰŻ. Ù‚ŰŻ ŰȘÙ‚Ű§ŰšÙ„ ŰšŰč۶ Ű§Ù„Ù…ŰŽŰ§ÙƒÙ„ قي ŰȘŰ«ŰšÙŠŰȘ\n"
-"Mandrake Linux. ۧ۰ۧ Ű­ŰŻŰ« Ű°Ù„Ùƒ, يمكنك Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ في ÙˆŰ¶Űč Ù†Ű”ÙŠ, Ù„Ù‡Ű°Ű§ Ű§Ù„Űș۱۶,\n"
-"ۧ۶ŰșŰ· `F1' ŰčÙ†ŰŻ Ű§Ù„Ű„Ù‚Ù„Ű§Űč من Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹ, و Ű§ÙƒŰȘŰš `text'."
+msgid "Authentication Windows Domain"
+msgstr "ŰȘŰ­Ù‚Ù‚ Ù†Ű·Ű§Ù‚ Windows"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Save packages selection"
-msgstr "Ű§Ű­ÙŰž ۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„Ű­ŰČم"
+msgid "US keyboard"
+msgstr "Ù„ÙˆŰ­Ű© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­ Ű§Ù„ŰŁÙ…Ű±ÙŠÙƒÙŠŰ©"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Automated"
-msgstr "ŰąÙ„ÙŠ"
+msgid "Buttons emulation"
+msgstr "Ù…Ű­Ű§ÙƒŰ§Ű© Ű§Ù„ŰŁŰČ۱ۧ۱"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Replay"
-msgstr "ۧŰčۧۯ۩"
+msgid ", network printer \"%s\", port %s"
+msgstr ", ۷ۧۚŰčŰ© ŰŽŰšÙƒŰ© \"%s\", Ű§Ù„Ù…Ù†ÙŰ° %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
"\n"
-"You may prefer to replay the installation.\n"
+"Drakbackup activities via tape:\n"
+"\n"
msgstr ""
-"Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„ŰąÙ„ÙŠ Ù‚ŰŻ يŰȘم ŰšŰŽÙƒÙ„ ŰȘÙ„Ù‚Ű§ŰŠÙŠ ۧ۰ۧ ۣ۱ۯŰȘ Ű°Ù„Ùƒ,\n"
-"في Ù‡Ű°Ù‡ Ű§Ù„Ű­Ű§Ù„Ű© ŰłÙŠŰłŰȘولي Űčلى كل Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš Ù„ŰŻÙŠÙƒ!!\n"
-"(Ù‡Ű°Ű§ ŰšŰ§Ù„Ù†ŰłŰšŰ© للŰȘŰ«ŰšÙŠŰȘ Űčلى ŰŹÙ‡Ű§ŰČ ŰąŰźŰ±).\n"
"\n"
-"Ű±ŰšÙ…Ű§ ŰȘÙŰ¶Ù„ ۧŰčۧۯ۩ ŰčÙ…Ù„ÙŠŰ© Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ.\n"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Generate auto install floppy"
-msgstr "Ű§Ù†ŰŽŰŠ Ù‚Ű±Ű” ŰȘŰ«ŰšÙŠŰȘ ŰąÙ„ÙŠ"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Reboot"
-msgstr "ۧŰčۧۯ۩ Ű§Ù„ŰȘŰŽŰșيل"
+"Ù†ŰŽŰ§Ű·Ű§ŰȘ Drakbackup Űčن Ű·Ű±ÙŠÙ‚ ŰŽŰ±ÙŠŰ· Ű§Ù„ŰȘŰźŰČين:\n"
+"\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Some steps are not completed.\n"
"\n"
-"Do you really want to quit now?"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
msgstr ""
-"ŰšŰč۶ Ű§Ù„ŰźŰ·ÙˆŰ§ŰȘ لم يŰȘم ŰȘكملŰȘÙ‡Ű§.\n"
"\n"
-"هل ŰȘŰ±ÙŠŰŻ Ű§Ù„ŰźŰ±ÙˆŰŹ Ű§Ù„ŰąÙ† فŰčÙ„Ű§Ù‹ŰŸ"
+" Ù…ŰŽÙƒÙ„Ű© في ÙˆŰ”Ù„Ű© FTP: لم يكن ŰšŰ§Ù„Ű„Ù…ÙƒŰ§Ù† Ű§Ű±ŰłŰ§Ù„ Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙƒ "
+"ۚۧ۳ŰȘŰźŰŻŰ§Ù… FTP.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Creating auto install floppy..."
-msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù†ŰŽŰ§ŰĄ Ù‚Ű±Ű” Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„ŰąÙ„ÙŠ..."
+msgid "Sending Speed:"
+msgstr "۳۱ŰčŰ© Ű§Ù„Ű„Ű±ŰłŰ§Ù„:"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "ŰŁŰŻŰźÙ„ Ù‚Ű±Ű” Ù…Ű±Ù† ÙŰ§Ű±Űș في Ű§Ù„ŰłÙˆŰ§Ù‚Ű© %s"
+msgid "Halt bug"
+msgstr "Halt bug"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
+msgid "Mail alert configuration"
+msgstr "ŰȘÙ‡ÙŠŰŠŰ© ŰȘÙ†ŰšÙŠÙ‡ Ű§Ù„ŰšŰ±ÙŠŰŻ"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "ÙŰŽÙ„ ŰȘŰ«ŰšÙŠŰȘ Ù…Ű­Ù…Ù‘Ù„ Ű§Ù„Ű„Ù‚Ù„Ű§Űč. ŰžÙ‡Ű± Ű§Ù„ŰźŰ·ŰŁ Ű§Ù„ŰȘŰ§Ù„ÙŠ:"
+msgid "Tokelau"
+msgstr "ŰȘÙˆÙƒÙ„Ű§Ùˆ"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Installing bootloader"
-msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰ«ŰšÙŠÙ† Ù…Ű­Ù…Ù‘Ù„ Ű§Ù„Ű„Ù‚Ù„Ű§Űč"
+msgid "Bosnian"
+msgstr "Ű§Ù„ŰšÙˆŰłÙ†ÙŠŰ©"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"۟۷ۣ ŰŁŰ«Ù†Ű§ŰĄ ŰȘŰ«ŰšÙŠŰȘ aboot, \n"
-"Ű­Ű§ÙˆÙ„ Ű§Ù„Ű„ŰŹŰšŰ§Ű± Űčلى Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ Ű­ŰȘى و لو ŰŁŰŻÙŠ Ű°Ù„Ùƒ لŰȘŰŻÙ…ÙŠŰ± Ű§Ù„ŰȘŰŹŰČŰŠŰ© Ű§Ù„ŰŁÙˆÙ„Ù‰ŰŸ"
+msgid "Release: "
+msgstr "Ű§Ù„Ű„Ű”ŰŻŰ§Ű±:"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Do you want to use aboot?"
-msgstr "هل ŰȘŰ±ÙŠŰŻ ۧ۳ŰȘŰźŰŻŰ§Ù… aboot۟"
+msgid "Connection speed"
+msgstr "۳۱ŰčŰ© Ű§Ù„Ű„ŰȘŰ”Ű§Ù„"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
msgstr ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Preparing bootloader..."
-msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰ­Ű¶ÙŠŰ± Ù…Ű­Ù…Ù‘Ù„ Ű§Ù„Ű„Ù‚Ù„Ű§Űč..."
+"ÙŰ¶Ù„Ű§Ù‹ ŰŁŰŻŰźÙ„ Ű§ŰłÙ… ŰŹÙ‡Ű§ŰČ Ù†ŰłŰź Ű§Ù„ŰŁÙ‚Ű±Ű§Ű”\n"
+" Ù…Ű«Ű§Ù„: 0,1,0"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Domain Admin Password"
-msgstr "ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ± Ù„Ù…ŰŻÙŠŰ± Ű§Ù„Ù†Ű·Ű§Ù‚"
+msgid "Namibia"
+msgstr "Ù†Ű§Ù…ÙŠŰšÙŠŰ§"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Domain Admin User Name"
-msgstr "Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… Ù„Ù…ŰŻÙŠŰ± Ű§Ù„Ù†Ű·Ű§Ù‚"
+msgid "Database Server"
+msgstr "ŰźŰ§ŰŻÙ… Ù‚ÙˆŰ§ŰčŰŻ ŰšÙŠŰ§Ù†Ű§ŰȘ"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Windows Domain"
-msgstr "Ù†Ű·Ű§Ù‚ Windows"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr "Ű§Ù…ÙƒŰ§Ù†ÙŠŰ§ŰȘ مميŰČŰ© Ù„Ù‡Ű°Ű§ Ű§Ù„Ù…ŰŽŰșل (Ű§Ù…ÙƒŰ§Ù†ÙŠŰ© Ű§Ù„Ù†ŰłŰź ŰŁÙˆ ŰŻŰčم DVD)"
-#: ../../install_steps_interactive.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Authentication Windows Domain"
-msgstr "ŰȘŰ­Ù‚Ù‚ Ù†Ű·Ű§Ù‚ Windows"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "Ù„Ű§ يمكن Ű§Ű¶Ű§ÙŰ© ŰȘŰŹŰČŰŠŰ© Ű§Ù„Ù‰ RAID _Ű§Ù„Ù…ŰŹÙ‡ŰČ_ md%d"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Server"
-msgstr "ŰźŰ§ŰŻÙ… NIS"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Domain"
-msgstr "Ù†Ű·Ű§Ù‚ NIS"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Authentication NIS"
-msgstr "ŰȘŰ­Ù‚Ù‚ NIS"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS"
-msgstr "NIS"
+"يمكن Ù„ŰšŰ·Ű§Ù‚ŰȘك Ű§Ù„ŰȘمŰȘŰč ۚۯŰčم للŰȘŰłŰ±ÙŠŰč Ű«Ù„Ű§Ű«ÙŠ Ű§Ù„ŰŁŰšŰčۧۯ لكن ÙÙ‚Ű· مŰč XFree %s, \n"
+"Ù„Ű§Ű­Űž ŰŁÙ† Ù‡Ű°Ű§ Ű§Ù„ŰŻŰčم ŰȘŰŹŰ±ÙŠŰšÙŠ و Ù‚ŰŻ يŰȘ۳ۚۚ في Ű§ÙŠÙ‚Ű§Ù ŰŹÙ‡Ű§ŰČك.\n"
+"ŰšŰ·Ű§Ù‚ŰȘك Ù…ŰŻŰčÙˆÙ…Ű© Űčن Ű·Ű±ÙŠÙ‚ XFree %s Ű§Ù„ŰȘي يمكن ŰŁÙ† ŰȘكون Ù…ŰŻŰčÙˆÙ…Ű© ŰšŰŽÙƒÙ„ ŰŁÙŰ¶Ù„ في ÙˆŰ¶ŰčÙŠŰ© "
+"Ű§Ù„Ű±ŰłÙˆÙ… Ű«Ù†Ű§ŰŠÙŠŰ© Ű§Ù„ŰŁŰšŰčۧۯ."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "LDAP Server"
-msgstr "ŰźŰ§ŰŻÙ… LDAP"
+msgid "Please wait, setting security options..."
+msgstr "Ű§Ù†ŰȘ۞۱ من ÙŰ¶Ù„Ùƒ, ŰŹŰ§Ű±ÙŠ ŰȘŰčيين ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„ŰŁÙ…Ù†..."
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr "ŰșÙŠŰ± مŰčŰ±ÙˆÙ|CPH05X (bt878) [Ù…Ű”Ù†Űčون ÙƒŰ«ÙŠŰ±ÙˆÙ†]"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Authentication LDAP"
-msgstr "ŰȘŰ­Ù‚Ù‚ LDAP"
+msgid "Launch the graphical environment when your system starts"
+msgstr "ŰŽŰșّل X-Window ŰčÙ†ŰŻ ۚۯۥ Ű§Ù„ŰȘŰŽŰșيل"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LDAP"
-msgstr "LDAP"
+msgid "hourly"
+msgstr "كلّ ۳ۧŰčŰ© "
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Local files"
-msgstr "Ù…Ù„ÙŰ§ŰȘ Ù…Ű­Ù„ÙŠŰ©"
+msgid " Successfuly Restored on %s "
+msgstr " ŰȘمŰȘ Ű§Ù„Ű„ŰłŰȘŰčۧۯ۩ ŰšÙ†ŰŹŰ§Ű­ Űčلى %s "
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Authentication"
-msgstr "Ű§Ù„ŰȘŰ­Ù‚Ù‚"
+msgid "Making printer port available for CUPS..."
+msgstr "ŰŹŰ§Ű±ÙŠ ŰŹŰčل Ù…Ù†ÙŰ° Ű§Ù„Ű·Ű§ŰšŰčŰ© مŰȘÙˆÙŰ±Ű§Ù‹ لـCUPS..."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr "ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±Ùˆ Ù‡Ű°Ù‡ Ù‚Ű”ÙŠŰ±Ű© ŰŹŰŻŰ§Ù‹ (ÙŠŰŹŰš ŰŁÙ† ŰȘكون %d Ű±Ù…ÙˆŰČ Űčلى Ű§Ù„ŰŁÙ‚Ù„)"
+msgid "Antigua and Barbuda"
+msgstr "ŰŁÙ†ŰȘيŰșÙˆŰ§ و ŰšŰ§Ű±ŰšÙˆŰŻŰ§"
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "No password"
-msgstr "Ù„Ű§ ÙƒÙ„Ù…Ű© Ù…Ű±ÙˆŰ±"
+msgid ""
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
+msgstr ""
+"!!! ŰȘŰžÙ‡Ű± ۧ۰ۧ ÙƒŰ§Ù†ŰȘ ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ± في Ù‚Ű§ŰčŰŻŰ© ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„Ù†ŰžŰ§Ù… Ù…ŰźŰȘÙ„ÙŰ©\n"
+"Űčن ŰȘلك Ű§Ù„ŰȘي Ù„Ù‚Ű§ŰčŰŻŰ© ŰšÙŠŰ§Ù†Ű§ŰȘ ŰźŰ§ŰŻÙ… Ű§Ù„Ű·Ű±ÙÙŠŰ§ŰȘ.\n"
+"Ű§Ű­Ű°Ù/ŰŁŰčŰŻ Ű§Ű¶Ű§ÙŰ© Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… Ű§Ù„Ù‰ ŰźŰ§ŰŻÙ… Ű§Ù„Ű·Ű±ÙÙŠŰ§ŰȘ لŰȘمكين ŰȘŰłŰŹÙŠÙ„ Ű§Ù„ŰŻŰźÙˆÙ„."
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Set root password"
-msgstr "Űčيّن ÙƒÙ„Ù…Ű© Ù…Ű±ÙˆŰ± Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… Ű§Ù„ŰŹŰ°Ű±"
+msgid "Spanish"
+msgstr "Ű§Ù„Ű„ŰłŰšŰ§Ù†ÙŠŰ©"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr "لم ŰȘقم ŰšŰȘÙ‡ÙŠŰŠŰ© ŰźŰ§ŰŻÙ… X. هل ŰŁÙ†ŰȘ مŰȘŰŁÙƒŰŻ ŰŁÙ†Ùƒ ŰȘŰ±ÙŠŰŻ Ű°Ù„ÙƒŰŸ"
+msgid "Start"
+msgstr "ۧۚۯۣ"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Ű§Ù„ŰźŰŻÙ…Ű§ŰȘ: %d Ù…Ù†ŰŽÙ‘Ű·Ű© لـ %d Ù…ŰłŰŹÙ„Ű©"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Services"
-msgstr "Ű§Ù„ŰźŰŻÙ…Ű§ŰȘ"
+msgid "Configuring applications..."
+msgstr "ŰŹŰ§Ű±ÙŠ Ű„Űčۯۧۯ Ű§Ù„ŰȘŰ·ŰšÙŠÙ‚Ű§ŰȘ..."
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "System"
-msgstr "Ű§Ù„Ù†ŰžŰ§Ù…"
+msgid "Normal modem connection"
+msgstr "ÙˆŰ”Ù„Ű© Ù…ÙˆŰŻÙ… ŰčŰ§ŰŻÙŠŰ©"
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "%s on %s"
-msgstr "%s Űčلى %s"
+msgid "File Selection"
+msgstr "ۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„Ù…Ù„ÙŰ§ŰȘ"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Bootloader"
-msgstr "Ù…Ű­Ù…Ù‘Ù„ Ű§Ù„Ű„Ù‚Ù„Ű§Űč"
+msgid ""
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+" tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+" standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
+msgstr ""
+"Ù…Ű§ هي ŰȘÙ‡ÙŠŰŠŰ© ISDN Ű§Ù„ŰȘي ŰȘÙŰ¶Ù„Ù‡Ű§ŰŸ\n"
+"\n"
+"* Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Ù‚ŰŻÙŠÙ…Ű© ŰȘŰłŰȘŰźŰŻÙ… isdn4net. و هي ŰȘŰ­ŰȘوي Űčلى ŰŁŰŻÙˆŰ§ŰȘ\n"
+" Ù‚ÙˆÙŠŰ© و Ù„ÙƒÙ†Ù‡Ű§ Ű”Űčۚ۩ Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ©, و ŰșÙŠŰ± Ù‚ÙŠŰ§ŰłÙŠŰ©.\n"
+"\n"
+"* Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰŹŰŻÙŠŰŻŰ© ŰŁŰłÙ‡Ù„ في Ű§Ù„ÙÙ‡Ù…, و ŰŁÙƒŰ«Ű±\n"
+" Ù‚ÙŠŰ§ŰłÙŠŰ©, و لكن مŰč ŰŁŰŻÙˆŰ§ŰȘ ŰŁÙ‚Ù„.\n"
+"\n"
+"Ù†Ű­Ù† Ù†ÙŰ¶Ù‘Ù„ لك Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰźÙÙŠÙŰ©.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
-msgid "Boot"
-msgstr "Ű§Ù„Ű„Ù‚Ù„Ű§Űč"
+msgid "CUPS"
+msgstr "CUPS"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "disabled"
-msgstr "مŰčŰ·Ù„"
+msgid "Run config tool"
+msgstr "ŰŽŰșّل ۣۯۧ۩ Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ©"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "activated"
-msgstr "Ù…Ù†ŰŽÙ‘Ű·"
+msgid "Bootloader installation"
+msgstr "ŰȘŰ«ŰšÙŠŰȘ Ù…Ű­Ù…Ù„ Ű§Ù„Ű„Ù‚Ù„Ű§Űč"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Firewall"
-msgstr "ۏۯۧ۱ Ù†Ű§Ű±ÙŠ"
+msgid "Root partition size in MB: "
+msgstr "Ű­ŰŹÙ… Ű§Ù„ŰȘŰŹŰČŰŠŰ© Ű§Ù„ŰŹŰ°Ű±ÙŠŰ© ŰšŰ§Ù„Ù…ÙŠŰșŰ§ŰšŰ§ÙŠŰȘ"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Security"
-msgstr "Ű§Ù„ŰŁÙ…Ù†"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "Ù‡Ű°Ù‡ Ű§Ù„Ű­ŰČÙ…Ű© Ű§Ù„ŰČŰ§Ù…ÙŠŰ©, Ù„Ű§ يمكن ŰčŰŻÙ… ۧ۟ŰȘÙŠŰ§Ű±Ù‡Ű§"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Security Level"
-msgstr "Ù…ŰłŰȘوى Ű§Ù„ŰŁÙ…Ù†"
+msgid "Etherboot ISO image is %s"
+msgstr "Etherboot ISO image هي %s"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Network"
-msgstr "Ű§Ù„ŰŽŰšÙƒŰ©"
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"named (BIND) هو ŰźŰ§ŰŻÙ… ŰŁŰłÙ…Ű§ŰĄ Ù†Ű·Ű§Ù‚ (DNS) و Ű§Ù„Ű°ÙŠ ÙŠŰłŰȘŰźŰŻÙ… لمŰčŰ±ÙŰ© ŰŁŰłÙ…Ű§ŰĄ Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙŰ§ŰȘ "
+"ŰŁÙˆ ŰčÙ†Ű§ÙˆÙŠÙ† IP."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Network & Internet"
-msgstr "Ű§Ù„ŰŽŰšÙƒŰ© و Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ"
+msgid "Disconnect..."
+msgstr "Ű§Ù‚Ű·Űč Ű§Ù„Ű„ŰȘŰ”Ű§Ù„..."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Graphical interface"
-msgstr "Ű§Ù„ÙˆŰ§ŰŹÙ‡Ű© Ű§Ù„Ű±ŰłÙˆÙ…ÙŠŰ©"
+msgid "Saint Lucia"
+msgstr "ŰłŰ§Ù†ŰȘ Ù„ÙˆŰłÙŠŰ§"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Hardware"
-msgstr "Ű§Ù„ŰčŰȘۧۯ"
+msgid "Report"
+msgstr "ŰȘÙ‚Ű±ÙŠŰ±"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "TV card"
-msgstr "ŰšŰ·Ű§Ù‚Ű© Ű§Ù„ŰȘÙ„ÙŰ§ŰČ"
+msgid "Palau"
+msgstr "ŰšŰ§Ù„Ű§Ùˆ"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "لم يŰȘم Ű§ÙŠŰŹŰ§ŰŻ ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű”ÙˆŰȘ. Ű­Ű§ÙˆÙ„ ŰȘŰŽŰșيل \"harddrake\" ŰšŰčŰŻ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ"
+msgid "level"
+msgstr "Ű§Ù„Ù…ŰłŰȘوى"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr "ŰŽŰșّل \"sndconfig\" ŰšŰčŰŻ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ لŰȘÙ‡ÙŠŰŠŰ© ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű”ÙˆŰȘ Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙƒ"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
+msgstr "كل Ù…ŰŽÙƒÙ„Ű© ŰłÙŠŰȘم ŰȘŰȘŰšŰčÙ‡Ű§ من ŰźŰšÙŠŰ± ÙˆŰ§Ű­ŰŻ مŰčŰȘÙ…ŰŻ من MandrakeSoft."
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "هل Ù„ŰŻÙŠÙƒ ŰšŰ·Ű§Ù‚Ű© Ű”ÙˆŰȘ ISA۟"
+msgid "Package Group Selection"
+msgstr "ۧ۟ŰȘÙŠŰ§Ű± Ù…ŰŹÙ…ÙˆŰčۧŰȘ Ű§Ù„Ű­ŰČم"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sound card"
-msgstr "ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű”ÙˆŰȘ"
+msgid "Restore Via Network Protocol: %s"
+msgstr "ۧ۳ŰȘŰčŰŻ Űčن Ű·Ű±ÙŠÙ‚ ŰšŰ±ÙˆŰȘوكول Ű§Ù„ŰŽŰšÙƒŰ©: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Remote CUPS server"
-msgstr "ŰźŰ§ŰŻÙ… CUPS ŰšŰčÙŠŰŻ"
+msgid "You can configure each parameter of the module here."
+msgstr "يمكنك ŰȘÙ‡ÙŠŰŠŰ© كل مŰčŰ§Ù…Ù„ Ù„Ù„ÙˆŰ­ŰŻŰ© Ù‡Ù†Ű§."
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "No printer"
-msgstr "Ù„Ű§ ۷ۧۚŰčŰ©"
+msgid "Choose the resolution and the color depth"
+msgstr "ۧ۟ŰȘ۱ ŰŻÙ‚Ű© Ű§Ù„Űč۱۶ و Űčمق Ű§Ù„ŰŁÙ„ÙˆŰ§Ù…"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Printer"
-msgstr "۷ۧۚŰčŰ©"
+msgid "Emulate third button?"
+msgstr "Ù…Ű­Ű§ÙƒŰ§Ű© Ű§Ù„ŰČ۱ Ű§Ù„Ű«Ű§Ù„Ű«ŰŸ"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mouse"
-msgstr "Ű§Ù„ÙŰŁŰ±Ű©"
+msgid ""
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
+msgstr ""
+"Ù„Ű§ يمكنك Ű§Ù†ŰŽŰ§ŰĄ ŰȘŰŹŰČŰŠŰ© ŰŹŰŻÙŠŰŻŰ©\n"
+"(Ù„ŰŁÙ†Ùƒ ÙˆŰ”Ù„ŰȘ Ű§Ù„Ù‰ Ű§Ù„ŰčŰŻŰŻ Ű§Ù„ŰŁÙ‚Ű”Ù‰ من Ű§Ù„ŰȘŰŹŰČۊۧŰȘ Ű§Ù„ŰŁŰłŰ§ŰłÙŠŰ©).\n"
+"ŰŁÙˆÙ„Ű§Ù‹ Ű§ŰźŰ°Ù ŰȘŰŹŰČŰŠŰ© ŰŁŰłŰ§ŰłÙŠŰ© و قم ŰšŰ„Ù†ŰŽŰ§ŰĄ ŰȘŰŹŰČŰŠŰ© ممŰȘŰŻŰ©."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Timezone"
-msgstr "Ű§Ù„Ù…Ù†Ű·Ù‚Ű© Ű§Ù„ŰČÙ…Ù†ÙŠŰ©"
+msgid "Mount"
+msgstr "Ű­Ù…Ù„"
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Keyboard"
-msgstr "Ù„ÙˆŰ­Ű© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­"
+msgid "Creating auto install floppy"
+msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù†ŰŽŰ§ŰĄ Ù‚Ű±Ű” Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„ŰąÙ„ÙŠ"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Summary"
-msgstr "Ù…Ù„ŰźŰ”"
+msgid "Install updates"
+msgstr "ŰȘŰ«ŰšÙŠŰȘ ŰȘŰ­ŰŻÙŠŰ«Ű§ŰȘ Ű§Ù„Ù†ŰžŰ§Ù…"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "NTP Server"
-msgstr "ŰźŰ§ŰŻÙ… NTP"
+msgid "text box height"
+msgstr "ۧ۱ŰȘÙŰ§Űč Ű§Ù„Ű”Ù†ŰŻÙˆÙ‚ Ű§Ù„Ù†Ű”ÙŠ"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "ŰȘŰČŰ§Ù…Ù† وقŰȘ ŰąÙ„ÙŠ (ۚۧ۳ŰȘŰźŰŻŰ§Ù… NTP)"
+msgid "State"
+msgstr "Ű§Ù„Ű­Ű§Ù„Ű©"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "۳ۧŰčŰ© Ű§Ù„ŰŹÙ‡Ű§ŰČ Ù…Ű¶ŰšÙˆŰ·Ű© Űčلى ŰȘوقيŰȘ ŰșŰ±ÙŠÙ†ŰȘŰŽ"
+msgid "Be sure a media is present for the device %s"
+msgstr "ŰȘŰŁÙƒŰŻ من ÙˆŰŹÙˆŰŻ Ű§Ù„ÙˆŰłÙŠŰ· Ù„Ù„ÙˆŰ­ŰŻŰ© %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which is your timezone?"
-msgstr "Ù…Ű§ هي Ù…Ù†Ű·Ù‚ŰȘك Ű§Ù„ŰČÙ…Ù†ÙŠŰ©ŰŸ"
+msgid "Enable multiple profiles"
+msgstr "ŰȘمكين Ű§Ù„ŰȘŰŽÙƒÙŠÙ„Ű§ŰȘ Ű§Ù„Ù…ŰȘŰčŰŻŰŻŰ©"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Would you like to try again?"
-msgstr "هل ŰȘŰ±ÙŠŰŻ Ű§Ù„Ù…Ű­Ű§ÙˆÙ„Ű© Ù…Ű±Ű©Ù‹ ŰŁŰźŰ±Ù‰ŰŸ"
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
+msgstr "Ù‡Ű°Ù‡ Ű§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ ÙŠÙ…ÙƒÙ†Ù‡Ű§ Ù†ŰłŰź و ۧ۳ŰȘ۱ۏۧŰč كل Ű§Ù„Ù…Ù„ÙŰ§ŰȘ في ŰŻÙ„ÙŠÙ„ /etc.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Unable to contact mirror %s"
-msgstr "ŰȘŰč۰۱ ۧ?ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ù…Ű±ŰąŰ© %s"
+msgid "Local printer"
+msgstr "۷ۧۚŰčŰ© Ù…Ű­Ù„ÙŠŰ©"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ù…Ű±ŰąŰ© Ù„Ù„Ű­Ű”ÙˆÙ„ Űčلى Ù‚Ű§ŰŠÙ…Ű© ŰšŰ§Ù„Ű­ŰČم Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű©..."
+msgid "Files Restored..."
+msgstr "Ű§Ù„Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ù…ŰłŰȘŰčۧۯ۩..."
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "ۧ۟ŰȘ۱ Ù…Ű±ŰąŰ© ŰłÙŠŰȘم من ŰźÙ„Ű§Ù„Ù‡Ű§ ŰȘنŰČيل Ű§Ù„Ű­ŰČم"
+msgid "Package selection"
+msgstr "ۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„Ű­ŰČم"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr ""
-"ŰŹŰ§Ű±ÙŠ Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšÙ…ÙˆÙ‚Űč Mandrake Linux Ù„Ù„Ű­Ű”ÙˆÙ„ Űčلى Ù‚Ű§ŰŠÙ…Ű© ŰšŰ§Ù„Ù…Ű±Ű§ÙŠŰ§ Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű©..."
+msgid "Mauritania"
+msgstr "Ù…ÙˆŰ±ÙŠŰȘŰ§Ù†ÙŠŰ§"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
"\n"
-"Do you want to install the updates ?"
msgstr ""
-"ŰȘŰłŰȘŰ·ÙŠŰč Ű§Ù„ŰąÙ† ŰȘنŰČيل Ű§Ù„Ű­ŰČم Ű§Ù„Ù…Ű­ŰŻÙ‘Ű«Ű©. Ù‡Ű°Ù‡ Ű§Ù„Ű­ŰČم\n"
-"ŰȘم ŰȘŰ­ŰŻÙŠŰ«Ù‡Ű§ ŰšŰčŰŻ ۧ۔ۯۧ۱ Ű§Ù„ŰȘوŰČيŰčŰ©. Ù‚ŰŻ\n"
-"ŰȘŰ­ŰȘوي Űčلى Ű§Ű”Ù„Ű§Ű­Ű§ŰȘ ŰŁÙ…Ù†ÙŠŰ© ŰŁÙˆ Ű§Ű”Ù„Ű§Ű­Ű§ŰȘ لŰčÙŠÙˆŰš ŰšŰ±Ù…ŰŹÙŠŰ©.\n"
+"يمكنني Ű­ÙŰž Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ© و Ű§ÙŰȘ۱ۧ۶ ŰŁÙ†Ùƒ قمŰȘ ۚۄŰčۯۧۯ ŰźŰ§ŰŻÙ… DHCP Ù…ŰłŰšÙ‚Ű§Ù‹; في Ù‡Ű°Ù‡ Ű§Ù„Ű­Ű§Ù„ "
+"ŰȘŰŁÙƒŰŻ من ŰŁÙ†Ù†ÙŠ ŰŁŰłŰȘŰ·ÙŠŰč Ù‚Ű±Ű§ŰĄŰ© Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„ŰȘي ŰȘŰłŰȘŰźŰŻÙ…Ù‡Ű§ Ù„Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ© ŰšŰŽÙƒÙ„ Ű”Ű­ÙŠŰ­; "
+"ŰłŰŁÙ‚ÙˆÙ… ۚۄŰčۧۯ۩ ŰȘÙ‡ÙŠŰŠŰȘÙ‡Ű§ و لن ŰŁÙ‚ÙˆÙ… ŰšŰŁÙŠ ŰŽŰŠ ŰȘŰŹŰ§Ù‡ ŰȘÙ‡ÙŠŰŠŰ© ŰźŰ§ŰŻÙ… DHCP.\n"
"\n"
-"لŰȘنŰČيل Ù‡Ű°Ù‡ Ű§Ù„Ű­ŰČم, ŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ ŰŁÙ† ŰȘكون Ù„ŰŻÙŠÙƒ ۧŰȘŰ”Ű§Ù„ \n"
-"ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ.\n"
+"Ù…ŰŻŰźÙ„ DNS Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠ هو Ű§ŰłÙ… Ű§Ù„ŰźŰ§ŰŻÙ… Ű§Ù„Ù…ŰźŰšŰŠÙŠ Űčلى Ű§Ù„ŰŹŰŻŰ§Ű± Ű§Ù„Ù†Ű§Ű±ÙŠ. يمكنك Ű§ŰšŰŻŰ§Ù„ Ű°Ù„Ùƒ "
+"ŰšŰčÙ†ÙˆŰ§Ù† IP للـDNS Ű§Ù„ŰźŰ§Ű” ŰšÙ…ÙˆÙŰ± ŰźŰŻÙ…Ű© Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ, Ù…Ű«Ù„.\n"
+"\t\t \n"
+"Ű§Ù† لم يكن Ű°Ù„Ùƒ, يمكنني ۧŰčۯۧ۩ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ÙˆŰ§ŰŹÙ‡Ű© و ۧŰčۯۧ۩ ŰȘÙ‡ÙŠŰŠŰ© ŰźŰ§ŰŻÙ… DHCP لك.\n"
"\n"
-"هل ŰȘŰ±ÙŠŰŻ ŰȘنŰČيل Ù‡Ű°Ù‡ Ű§Ù„ŰȘŰ­ŰŻÙŠŰ«Ű§ŰȘ ۟"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "ÙŰ¶Ù„Ű§Ù‹ ŰŁŰŻŰźÙ„ Ù‚Ű±Ű” ÙˆŰ­ŰŻŰ§ŰȘ Ű§Ù„ŰȘŰ­ŰŻÙŠŰ« في Ű§Ù„ŰłÙˆŰ§Ù‚Ű© %s"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "ÙŰ¶Ù„Ű§Ù‹ ŰŁŰŻŰźÙ„ Ù‚Ű±Ű” Ű§Ù„Ű„Ù‚Ù„Ű§Űč Ű§Ù„Ű°ÙŠ ŰȘŰłŰȘŰźŰŻÙ…Ù‡ في Ű§Ù„ŰłÙˆŰ§Ù‚Ű© %s"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Post-install configuration"
-msgstr "ŰȘÙ‡ÙŠŰŠŰ© Ù…Ű§ ŰšŰčŰŻ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Installing package %s\n"
-"%d%%"
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
msgstr ""
-"ŰŹŰ§Ű±ÙŠ ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ű­ŰČÙ…Ű© %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Preparing installation"
-msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰȘŰ­Ű¶ÙŠŰ± للŰȘŰ«ŰšÙŠŰȘ"
+"لم يŰȘم Ű§ÙŠŰŹŰ§ŰŻ ۷ۧۚŰčŰ© Ù…Ű­Ù„ÙŠŰ©! لŰȘŰ«ŰšÙŠŰȘ ۷ۧۚŰčŰ© ÙŠŰŻÙˆÙŠŰ§Ù‹ Ű§ŰŻŰźÙ„ Ű§ŰłÙ… ŰŹÙ‡Ű§ŰČ/Ű§ŰłÙ… ملف في Ű­Ù‚Ù„ "
+"Ű§Ù„Ű„ŰŻŰźŰ§Ù„ (Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…ŰȘÙˆŰ§ŰČÙŠŰ©: /dev/lp0, /dev/lp1, ..., Ù…Ù…Ű§Ű«Ù„Ű© لـLPT1:, "
+"LPT2:, ..., ۷ۧۚŰčŰ© USB Ű§Ù„ŰŁÙˆÙ„Ù‰: /dev/usb/lp0, ۷ۧۚŰčŰ© USB Ű§Ù„Ű«Ű§Ù†ÙŠŰ©: /dev/usb/"
+"lp1, ...)."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹ Ű§Ù„Ù…ŰłÙ…Ù‰ \"%s\""
+msgid "All primary partitions are used"
+msgstr "كل Ű§Ù„ŰȘŰŹŰČۊۧŰȘ Ű§Ù„Ű±ŰŠÙŠŰłÙŠŰ© Ù…ŰłŰȘŰźŰŻÙ…Ű©"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
msgstr ""
-"ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ù„ŰŻÙŠÙƒ قل Ű§Ù„ŰŁÙ‚Ű±Ű§Ű” في Ű§Ù„Ù‚Ű§ŰŠÙ…Ű© ŰŁŰŻÙ†Ű§Ù‡, ۧ۶ŰșŰ· Ù…ÙˆŰ§ÙÙ‚.\n"
-"ۧ۰ۧ لم ŰȘمكن Ù„ŰŻÙŠÙƒ ŰŁÙŠ من Ù‡Ű°Ù‡ Ű§Ù„ŰŁÙ‚Ű±Ű§Ű”, ۧ۶ŰșŰ· Ű§Ù„Űșۧۥ.\n"
-"ۧ۰ۧ ÙƒŰ§Ù†ŰȘ ŰšŰč۶ Ù‡Ű°Ù‡ Ű§Ù„ŰŁÙ‚Ű±Ű§Ű” Ù…ÙÙ‚ÙˆŰŻŰ©, قم ۚۧŰČŰ§Ù„Ű© ۧ۟ŰȘÙŠŰ§Ű±Ù‡Ű§Ű«Ù… ۧ۶ŰșŰ· Ù…ÙˆŰ§ÙÙ‚."
+"ŰšŰčŰŻ Űčمل Ű°Ù„Ùƒ, Ù†Ù†Ű”Ű­ ۚۄŰčۧۯ۩ ŰȘŰŽŰșيل ŰšÙŠŰŠŰ© X Ù„ŰŻÙŠÙƒ لŰȘÙŰ§ŰŻÙŠ ŰŁÙŠ Ù…ŰŽŰ§ÙƒÙ„ ŰȘŰȘŰčلق ŰšŰ„ŰłÙ… "
+"Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ."
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
+#: ../../services.pm:1
#, c-format
-msgid "All"
-msgstr "Ű§Ù„ÙƒÙ„"
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr "ŰȘŰ­Ù‚Ù‚ و ŰȘÙ‡ÙŠŰŠŰ© ŰąÙ„ÙŠŰ© للŰčŰȘۧۯ ŰčÙ†ŰŻ Ű§Ù„Ű„Ù‚Ù„Ű§Űč."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "ŰȘŰ«ŰšÙŠŰȘ Ù…Ű”ŰșÙ‘Ű± فŰčÙ„Ű§Ù‹ (ŰźŰ”ÙˆŰ”Ű§Ù‹ ŰšŰŻÙˆÙ† urpmi)"
+msgid "Installation Server Configuration"
+msgstr "ŰȘÙ‡ÙŠŰŠŰ© ŰźŰ§ŰŻÙ… Ű§Ù„Ű«ŰšÙŠŰȘ"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "مŰč ÙˆŰ«Ű§ŰŠÙ‚ Ű§Ù„Ù…ŰłŰ§ŰčŰŻŰ© Ű§Ù„ŰŁŰłŰ§ŰłÙŠŰ© (Ù…ÙŰ¶Ù‘Ù„)"
+msgid "Configuring IDE"
+msgstr "ŰŹŰ§Ű±ÙŠ ŰȘÙ‡ÙŠŰŠŰ© IDE"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "With X"
-msgstr "مŰč X"
+msgid "Network functionality not configured"
+msgstr "لم يŰȘم ŰȘŰ­ŰŻÙŠŰŻ ÙˆŰžÙŠÙÙŠŰ© Ű§Ù„ŰŽŰšÙƒŰ©"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"لم ŰȘŰźŰȘ۱ ŰŁÙŠ Ù…ŰŹÙ…ÙˆŰčŰ© من Ű§Ù„Ű­ŰČم.\n"
-"ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ù…Ű”Űș۱ Ű§Ù„Ű°ÙŠ ŰȘŰ±ÙŠŰŻÙ‡:"
+msgid "Configure module"
+msgstr "ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ÙˆŰ­ŰŻŰ©"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Type of install"
-msgstr "نوŰč Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ"
+msgid "Cocos (Keeling) Islands"
+msgstr "ŰŹŰČ۱ Ű§Ù„ÙƒÙˆÙƒÙˆŰł"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Selected size is larger than available space"
-msgstr "Ű§Ù„Ű­ŰŹÙ… Ű§Ù„Ù…ŰźŰȘۧ۱ ŰŁÙƒŰšŰ± من Ű§Ù„Ù…ŰłŰ§Ű­Ű© Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű©"
+msgid "Disconnecting from the Internet "
+msgstr "ŰŹŰ§Ű±ÙŠ Ù‚Ű·Űč Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "ŰŁŰŻŰźÙ‡Ù„ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…Ű±Ù† Ű§Ù„Ù…Ű­ŰȘوى Űčلى ۧ۟ŰȘÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„Ű­ŰČم"
+msgid "You'll need to reboot before the modification can take place"
+msgstr "ŰłŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ ۧŰčۧۯ۩ Ű§Ù„ŰȘŰŽŰșيل Ù‚ŰšÙ„ ŰŁÙ† يŰȘم ŰȘفŰčيل Ű§Ù„ŰȘŰčŰŻÙŠÙ„Ű§ŰȘ"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Loading from floppy"
-msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„ من Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…Ű±Ù†"
+msgid "Provider phone number"
+msgstr "Ű±Ù‚Ù… Ù‡Ű§ŰȘف Ű§Ù„Ù…ÙˆÙŰ±"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Package selection"
-msgstr "ۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„Ű­ŰČم"
+msgid "Host %s"
+msgstr "Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Save on floppy"
-msgstr "Ű§Ű­ÙŰž Űčلى Ù‚Ű±Ű” Ù…Ű±Ù†"
+msgid "Armenia"
+msgstr "ŰŁŰ±Ù…ÙŠÙ†ÙŠŰ§"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Load from floppy"
-msgstr "Ű­Ù…Ù‘Ù„ من Ù‚Ű±Ű” Ù…Ű±Ù†"
+msgid "Fiji"
+msgstr "ÙÙŠŰŹÙŠ"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
msgstr ""
-"ÙŰ¶Ù„Ű§Ù ۧ۟ŰȘ۱ Ű­ÙŰž ŰŁÙˆ ŰȘŰ­Ù…ÙŠÙ„ ۧ۟ŰȘÙŠŰ§Ű±Ű§ŰȘك Ù„Ù„Ű­ŰČم من Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…Ű±Ù†.\n"
-"Ű§Ù„Ù†ŰłÙ‚ Ù…ŰŽŰ§ŰšÙ‡ Ù„ŰŁÙ‚Ű±Ű§Ű” Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„ŰąÙ„ÙŠ Ű§Ù„Ù…Ű±Ù†Ű©."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
-msgstr "Ù„Ű§ ÙŠÙˆŰŹŰŻ في Ù†ŰžŰ§Ù…Ùƒ Ù…ŰłŰ§Ű­Ű© مŰȘŰšÙ‚Ű© ŰȘكفي للŰȘŰ«ŰšÙŠŰȘ ŰŁÙˆ Ű§Ù„ŰȘŰ±Ù‚ÙŠŰ© (%d > %d)"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Looking for available packages..."
-msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰčŰ«ÙˆŰ± Űčلى Ű§Ù„Ű­ŰČم Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű©..."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰšŰ­Ű« Űčن Ű§Ù„Ű­ŰČم Ű§Ù„ŰȘي ŰłŰȘŰȘم ŰȘŰ±Ù‚ÙŠŰȘÙ‡Ű§..."
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Looking at packages already installed..."
-msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰȘŰčŰ±Ù Űčلى Ű§Ù„Ű­ŰČم Ű§Ù„Ù…Ű«ŰšŰȘŰ© Ù…ŰłŰšÙ‚Ű§Ù‹..."
+msgid "Second floppy drive"
+msgstr "ŰłÙˆŰ§Ù‚Ű© Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…Ű±Ù† Ű§Ù„Ű«Ű§Ù†ÙŠŰ©"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰšŰ­Ű« Űčن Ű§Ù„Ű­ŰČم Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű© و ۧŰčۯۧ۩ ŰšÙ†Ű§ŰĄ Ù‚Ű§ŰčŰŻŰ© ŰšÙŠŰ§Ù†Ű§ŰȘ rpm..."
+msgid "About Harddrake"
+msgstr "Ű­ÙˆÙ„ HardDrake"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "Ù„Ű§ ŰȘÙˆŰŹŰŻ Ù…ŰłŰ§Ű­Ű© ŰȘŰšŰŻÙŠÙ„ ÙƒŰ§ÙÙŠŰ© Ù„Ù„Ù‚ÙŠŰ§Ù… ŰšŰ§Ù„ŰȘŰ«ŰšÙŠŰȘ, ÙŰ¶Ù„Ű§Ù‹ ŰČŰŻ Ù…ŰłŰ§Ű­Ű© Ű§Ù„ŰȘŰšŰŻÙŠÙ„"
+msgid "Drive capacity"
+msgstr "Ű­ŰŹÙ… Ű§Ù„ŰłÙˆŰ§Ù‚Ű©"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
msgstr ""
-"ŰȘŰč۰۱ Ű§Ù„ŰȘŰŁÙƒŰŻ من ۔ۭ۩ Ù†ŰžŰ§Ù… Ű§Ù„Ù…ÙŰ§ŰȘ %s. هل ŰȘŰ±ÙŠŰŻ ŰȘŰ”Ű­ÙŠŰ­ Ű§Ù„ŰŁŰźŰ·Ű§ŰĄ (كن Ű­Ű°Ű±Ű§Ù‹, يمكن ŰŁÙ† "
-"ŰȘ۟۳۱ ŰšÙŠŰ§Ù†Ű§ŰȘ)"
+"ŰŁŰŻŰźÙ„ Ù‚Ű±Ű”Ű§ Ù…Ű±Ù†Ű§ في Ű§Ù„ŰłÙˆŰ§Ù‚Ű©\n"
+"كل Ű§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ Űčلى Ű§Ù„Ù‚Ű±Ű” ŰłŰȘÙ…Ű­Ù‰"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Check bad blocks?"
-msgstr "ŰȘŰ­Ù‚Ù‚ من Ű§Ù„ŰšÙ„ÙˆÙƒŰ§ŰȘ Ű§Ù„ŰłÙŠŰŠŰ©ŰŸ"
+msgid "Size: %s"
+msgstr "Ű§Ù„Ű­ŰŹÙ…: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "ۧ۟ŰȘ۱ Ű§Ù„ŰȘŰŹŰČۊۧŰȘ Ű§Ù„ŰȘي ŰȘŰ±ÙŠŰŻ ŰȘŰŹÙ‡ÙŠŰČÙ‡Ű§"
+msgid "Control and Shift keys simultaneously"
+msgstr "Ù…ÙŰ§ŰȘÙŠŰ­ Control و Shift في Ù†ÙŰł Ű§Ù„ÙˆÙ‚ŰȘ"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "ŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ ۧŰčۯۧ۩ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ لŰȘفŰčيل Ű§Ù„ŰȘŰčŰŻÙŠÙ„Ű§ŰȘ Űčلى ŰŹŰŻÙˆÙ„ Ű§Ù„ŰȘŰŹŰČۊۧŰȘ"
+msgid "secondary"
+msgstr "Ű«Ű§Ù†ÙˆÙŠ"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+msgid "View Backup Configuration."
+msgstr "ۧŰč۱۶ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the mount points"
-msgstr "ۧ۟ŰȘ۱ Ù†Ù‚Ű§Ű· Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„"
+msgid "if set to yes, report check result to syslog."
+msgstr "if set to yes, report check result to syslog."
-#: ../../install_steps_interactive.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "ŰŹŰ§Ű±ÙŠ Űčمل Ù…ŰłŰ­ للŰȘŰŹŰČۊۧŰȘ Ù„Ű„ÙŠŰŹŰ§ŰŻ Ù†Ù‚Ű§Ű· Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„"
+msgid "No password"
+msgstr "Ù„Ű§ ÙƒÙ„Ù…Ű© Ù…Ű±ÙˆŰ±"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No partition available"
-msgstr "Ù„Ű§ ŰȘÙˆŰŹŰŻ ŰȘŰŹŰČŰŠŰ©"
+msgid "Nigeria"
+msgstr "Ù†ÙŠŰŹÙŠŰ±ÙŠŰ§"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Configuring IDE"
-msgstr "ŰŹŰ§Ű±ÙŠ ŰȘÙ‡ÙŠŰŠŰ© IDE"
+msgid "There is no existing partition to use"
+msgstr "Ù„Ű§ ŰȘÙˆŰŹŰŻ ŰȘŰŹŰČŰŠŰ© Ù„Ű§ŰłŰȘŰźŰŻŰ§Ù…Ù‡Ű§"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "IDE"
-msgstr "IDE"
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
+msgstr ""
+"Ű§Ù„Ù…Ű§ŰłŰ­Ű§ŰȘ Ű§Ù„Ű¶ÙˆŰŠÙŠŰ© Ű§Ù„ŰȘŰ§Ù„ÙŠŰ©\n"
+"\n"
+"%s\n"
+"مŰȘÙˆÙŰ±Ű© Ù„Ù†ŰžŰ§Ù…Ùƒ.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "ŰŹŰ§Ű±ÙŠ ŰȘÙ‡ÙŠŰŠŰ© ŰšŰ·Ű§Ù‚Ű§ŰȘ PCMCIA..."
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
+msgstr ""
+"Ù„Ù„Ű·ŰšŰ§ŰčŰ© Ű§Ù„Ù‰ ۷ۧۚŰčŰ© TCP ŰŁÙˆ socket, ÙŠŰŹŰš Űčليك ۧŰč۷ۧۥ Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ ŰŁÙˆ ŰčÙ†ÙˆŰ§Ù† IP "
+"Ű§Ù„ŰźŰ§Ű” ŰšŰ§Ù„Ű·Ű§ŰšŰčŰ© و ۧ۟ŰȘÙŠŰ§Ű±ÙŠŰ§Ù‹ يمكنك Ű§Ű¶Ű§ÙŰ© Ű±Ù‚Ù… Ù…Ù†ÙŰ° Ű§Ù„Ű·Ű§ŰšŰčŰ© (Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠ هو 9100). "
+"Űčلى ŰźŰ§ŰŻÙ…Ű§ŰȘ HP JetDirect يكون Ű±Ù‚Ù… Ű§Ù„Ù…Ù†ÙŰ° ŰčŰ§ŰŻŰ©Ù‹ هو 9100, Űčلى Ű§Ù„ŰźŰ§ŰŻÙ…Ű§ŰȘ Ű§Ù„ŰŁŰźŰ±Ù‰ "
+"يمكن ŰŁÙ† يكون Ű§Ù„Ű±Ù‚Ù… ŰșÙŠŰ± Ű°Ù„Ùƒ. Ű§Ù„Ù‚ Ù†ŰžŰ±Ű© Űčلى ŰŻÙ„ÙŠÙ„ Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… للŰčŰȘۧۯ Ű§Ù„ŰźŰ§Ű” ŰšÙƒ."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid "Hard drive information"
+msgstr "مŰčÙ„ÙˆÙ…Ű§ŰȘ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Button 3 Emulation"
-msgstr "Ù…Ű­Ű§ÙƒŰ§Ű© Ű§Ù„ŰČ۱ 3"
+msgid "Russian"
+msgstr "Ű§Ù„Ű±ÙˆŰłÙŠŰ©"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Button 2 Emulation"
-msgstr "Ù…Ű­Ű§ÙƒŰ§Ű© Ű§Ù„ŰČ۱ 2"
+msgid "Jordan"
+msgstr "Ű§Ù„ŰŁŰ±ŰŻÙ†"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Buttons emulation"
-msgstr "Ù…Ű­Ű§ÙƒŰ§Ű© Ű§Ù„ŰŁŰČ۱ۧ۱"
+msgid "Hide files"
+msgstr "۟ۚۊ Ű§Ù„Ù…Ù„ÙŰ§ŰȘ"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ Ű§Ù„Ù…Ù†ÙŰ° Ű§Ù„ŰȘŰłÙ„ŰłÙ„ÙŠ Ű§Ù„Ù…ÙˆŰ”Ù„Ű© ŰšÙ‡ Ű§Ù„ÙŰŁŰ±Ű©"
+msgid "Auto-detect printers connected to this machine"
+msgstr "ŰȘŰ­Ù‚Ù‚ ŰŁÙ„ÙŠŰ§ من Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…ŰȘŰ”Ù„Ű© ŰšÙ‡Ű°Ű§ Ű§Ù„ŰŹÙ‡Ű§ŰČ"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Mouse Port"
-msgstr "Ù…Ù†ÙŰ° Ű§Ù„ÙŰŁŰ±Ű©"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgstr ""
+"XawTV ŰșÙŠŰ± Ù…Ű«ŰšÙ‘ŰȘ!\n"
+"\n"
+"\n"
+"ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ù„ŰŻÙŠÙƒ ŰšŰ·Ű§Ù‚Ű© ŰȘÙ„ÙŰ§ŰČ Ù„ÙƒÙ† لم ÙŠŰłŰȘŰ·Űč DrakX Ű§ÙƒŰȘŰŽŰ§ÙÙ‡Ű§ (Ù„Ű§ ŰȘÙˆŰŹŰŻ ÙˆŰ­ŰŻŰ§ŰȘ bttv "
+"ÙˆÙ„Ű§ saa7134\n"
+"في \"/etc/modules\") ŰŁÙˆ لم ŰȘŰ«ŰšÙ‘ŰȘ xawtv, ÙŰ¶Ù„Ű§Ù‹ قم ŰšŰ„Ű±ŰłŰ§Ù„ نŰȘۧۊۏ\n"
+"Ű§Ù„ŰŁÙ…Ű± \"lspcidrake -v -f\" Ű§Ù„Ù‰ \"install\\@mandrakesoft.com\"\n"
+"مŰč Ű§Ù„ŰčÙ†ÙˆŰ§Ù† \"undetected TV card\".\n"
+"\n"
+"\n"
+"يمكنك ŰȘŰ«ŰšÙŠŰȘ XawTV ŰšÙƒŰȘۧۚ۩ Ű§Ù„ŰŁÙ…Ű± \"urpmi xawtv\" ÙƒÙ…ŰłŰȘŰźŰŻÙ… ۏ۰۱ في ۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű±."
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Please choose your type of mouse."
-msgstr "ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ نوŰč Ű§Ù„ÙŰŁŰ±Ű©."
+msgid "Sorry, no floppy drive available"
+msgstr "ŰąŰłÙ , Ù„Ű§ Ù…ŰŻŰźÙ„ Ù…Ű±Ù† مŰȘۭۧ"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Encryption key for %s"
-msgstr "Ù…ÙŰ§ŰȘŰ­ Ű§Ù„ŰȘŰŽÙÙŠŰ±"
+#: ../../lang.pm:1
+#, c-format
+msgid "Bolivia"
+msgstr "ŰšÙˆÙ„ÙŠÙÙŠŰ§"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Upgrade %s"
-msgstr "ŰȘŰ±Ù‚ÙŠŰ© %s"
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
+"قم ۚۄŰčۯۧۯ ŰźŰ§ŰŻÙ… Windows Ù„ŰŹŰčل Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ مŰȘÙˆÙŰ±Ű© ŰȘŰ­ŰȘ ŰšŰ±ÙˆŰȘوكول IPP و قم ۚۄŰčۯۧۯ "
+"Ű§Ù„Ű·ŰšŰ§ŰčŰ© من Ù‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű© ۚۧ۳ŰȘŰźŰŻŰ§Ù… نوŰč Ű§Ù„ÙˆŰ”Ù„Ű© \"%s\" في Printerdrake.\n"
+"\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "هل Ù‡Ű°Ű§ ŰȘŰ«ŰšÙŠŰȘ ŰŁÙ… ŰȘŰ±Ù‚ÙŠŰ©ŰŸ"
+msgid "Bad package"
+msgstr "Ű­ŰČÙ…Ű© ŰłÙŠŰŠŰ©"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Install/Upgrade"
-msgstr "ŰȘŰ«ŰšÙŠŰȘ/ŰȘŰ±Ù‚ÙŠŰ©"
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
+"Ű­ÙˆÙ‘Ù„ ŰŹÙ‡Ű§ŰČك Ű§Ù„Ù‰ ŰźŰ§ŰŻÙ… Ù„ÙŠÙ†ÙƒŰł قوي ŰšÙ†Ù‚Ű±Ű§ŰȘ Ù‚Ù„ÙŠÙ„Ű© من Ű§Ù„ÙŰŁŰ±Ű©: ŰźŰ§ŰŻÙ… ÙˆÙŠŰš, ŰšŰ±ÙŠŰŻ, ۏۯۧ۱ "
+"Ù†Ű§Ű±ÙŠ, Ù…ÙˆŰŹÙ‘Ù‡, ŰźŰ§ŰŻÙ… Ù…Ù„ÙŰ§ŰȘ و ۷ۚۧŰčŰ©, ..."
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "Ù‡Ű§ هي Ù‚Ű§ŰŠÙ…Ű© ÙƒŰ§Ù…Ù„Ű© ŰšÙƒÙ„ Ù„ÙˆŰ­Ű§ŰȘ Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­ Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű©"
+msgid "DrakSec Basic Options"
+msgstr "ŰźÙŠŰ§Ű±Ű§ŰȘ DrakSec Ű§Ù„ŰŁŰłŰ§ŰłÙŠŰ©"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "۱ۏۧۥ, ۧ۟ŰȘ۱ Ù„ÙˆŰ­Ű© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­."
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program. Just type \"sndconfig\" in a console."
+msgstr ""
+"\n"
+"\n"
+"\n"
+"Ù…Ù„Ű­ÙˆŰžŰ©: ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ù„ŰŻÙŠÙƒ ŰšŰ·Ű§Ù‚Ű© Ű”ÙˆŰȘ ISA PnP, ŰłŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ ۧ۳ŰȘŰźŰŻŰ§Ù… ŰšŰ±Ù†Ű§Ù…ŰŹ "
+"sndconfig. ÙÙ‚Ű· Űčليك كŰȘۧۚ۩ \"sndconfig\" في ۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű±."
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Quit"
-msgstr "ŰźŰ±ÙˆŰŹ"
+msgid "Romania"
+msgstr "Ű±ÙˆÙ…Ű§Ù†ÙŠŰ§"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "License agreement"
-msgstr "ۧŰȘÙŰ§Ù‚ÙŠŰ© Ű§Ù„ŰȘŰ±ŰźÙŠŰ”"
+msgid "choose device"
+msgstr "ۧ۟ŰȘ۱ Ű§Ù„ŰŹÙ‡Ű§ŰČ "
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "An error occurred"
-msgstr "ŰžÙ‡Ű± ۟۷ۣ"
+msgid "Canada"
+msgstr "ÙƒÙ†ŰŻŰ§"
-#: ../../install_steps_newt.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+msgid "Remove from LVM"
+msgstr "ۧŰČŰ§Ù„Ű© من LVM"
-#: ../../install_steps_newt.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "ŰȘŰ«ŰšÙŠŰȘ Mandrake Linux %s"
+msgid "Timezone"
+msgstr "Ű§Ù„Ù…Ù†Ű·Ù‚Ű© Ű§Ù„ŰČÙ…Ù†ÙŠŰ©"
-#: ../../install_steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No floppy drive available"
-msgstr "Ù„Ű§ ŰȘÙˆŰŹŰŻ ŰłÙˆŰ§Ù‚Ű© ŰŁÙ‚Ű±Ű§Ű” Ù…Ű±Ù†Ű©"
+msgid "German"
+msgstr "Ű§Ù„ŰŁÙ„Ù…Ű§Ù†ÙŠŰ©"
-#: ../../install_steps.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Welcome to %s"
-msgstr "ŰŁÙ‡Ù„Ű§ ŰšÙƒÙ… في %s"
+msgid "Next ->"
+msgstr "Ű§Ù„ŰȘŰ§Ù„ÙŠ ->"
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
msgstr ""
-"لم يŰȘم ŰȘŰ«ŰšÙŠŰȘ ŰšŰč۶ Ű§Ù„Ű­ŰČم Ű§Ù„Ù…Ù‡Ù…Ű© ŰšŰŽÙ„ Ű”Ű­ÙŠŰ­.\n"
-"Ű„Ù…Ű§ ŰŁÙ† ŰłÙˆŰ§Ù‚Ű© Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹ ŰŁÙˆ ŰŁÙ† Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹ Ù†ÙŰłÙ‡ ŰšÙ‡ ŰčÙŠŰš Ù…Ű§.\n"
-"ŰȘŰŁÙƒŰŻ من ۔ۭ۩ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹ Űčلى ÙƒÙ…ŰšÙŠÙˆŰȘ۱ Ù…Ű«ŰšÙ‘ŰȘ ۚۧ۳ŰȘŰźŰŻŰ§Ù… Ű§Ù„ŰŁÙ…Ű± \"rpm -qpl Mandrake/"
-"RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm:1
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Ù†Ù‚Ű·Ű© ŰȘŰ­Ù…ÙŠÙ„ Ù…ÙƒŰ±Ű±Ù‘Ű© %s"
-#: ../../install_steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
msgstr ""
-"ŰžÙ‡Ű± ۟۷ۣ و Ù„Ű§ ŰŁŰčŰ±Ù كيف ŰŁŰȘŰčŰ§Ù…Ù„ مŰčه ŰšŰŁŰłÙ„ÙˆŰš ŰŹÙŠŰŻ.\n"
-"ŰȘۧۚŰč Űčلى Ù…ŰłŰ€ÙˆÙ„ÙŠŰȘك."
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please wait"
-msgstr "من ÙŰ¶Ù„Ùƒ Ű§Ù†ŰȘ۞۱"
+msgid "Guinea-Bissau"
+msgstr "ŰșÙŠÙ†ÙŠŰ§-ŰšÙŠŰłŰ§Ùˆ"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Ok"
-msgstr "Ù…ÙˆŰ§ÙÙ‚"
+msgid "Horizontal refresh rate"
+msgstr "Ù†ŰłŰšŰ© Ű§Ù„Ű„Ù†Űčۧێ Ű§Ù„ŰŁÙÙ‚ÙŠ"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Finish"
-msgstr "Ű„Ù†ŰȘÙ‡Ű§ŰĄ"
+msgid ""
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
+msgstr ""
+"لم يمكن ۧŰČŰ§Ù„Ű© ŰȘŰčيين Ù†Ù‚Ű·Ű© Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„ Ù†ŰžŰ±Ű§ Ù„ŰŁÙ† Ù‡Ű°Ù‡ Ű§Ù„ŰȘŰŹŰČŰŠŰ© Ù…ŰłŰȘŰźŰŻÙ…Ű© لـloop back.\n"
+"قم ۚۄŰČŰ§Ù„Ű© Ű§Ù„Ù€loopback ŰŁÙˆÙ„Ű§"
-#: ../../interactive.pm:1 ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Basic"
-msgstr "ŰŁŰłŰ§ŰłÙŠ"
+msgid ""
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
+msgstr ""
+"Ù„Ű§ يمكن ۚۯۥ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„ŰȘي ŰȘم ŰčÙ…Ù„Ù‡Ű§ ŰŁŰ«Ù†Ű§ŰĄ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„ŰąÙ†. ÙŰ¶Ù„Ű§Ù‹ ŰȘŰŁÙƒŰŻ ۧ۰ۧ ÙƒŰ§Ù† "
+"يمكن Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ Ű§Ù„ŰŽŰšÙƒŰ© ŰšŰčŰŻ Ű§Ù‚Ù„Ű§Űč Ű§Ù„Ù†ŰžŰ§Ù… و Ű”Ű­Ù‘Ű­ Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ© ۚۧ۳ŰȘŰźŰŻŰ§Ù… Ù…Ű±ÙƒŰČ ŰȘŰ­ÙƒÙ… "
+"Mandrake في Ù‚ŰłÙ… \"Ű§Ù„ŰŽŰšÙƒŰ© و Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ\"/\"Ű§Ù„ÙˆŰ”Ù„Ű§ŰȘ\", و ŰšŰčŰŻ Ű°Ù„Ùƒ قم ŰšŰȘÙ‡ÙŠŰŠŰ© "
+"Ű§Ù„Ű·Ű§ŰšŰčŰ©, ÙƒŰ°Ù„Ùƒ ۚۧ۳ŰȘŰźŰŻŰ§Ù… Ù…Ű±ÙƒŰČ ŰȘŰ­ÙƒÙ… Mandrake في Ù‚ŰłÙ… \"Ű§Ù„ŰčŰȘۧۯ\"/\"Ű§Ù„Ű·Ű§ŰšŰčŰ©\""
-#: ../../interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Advanced"
-msgstr "مŰȘÙ‚ŰŻÙ…"
+msgid "USB controllers"
+msgstr "مŰȘŰ­ÙƒÙ…Ű§ŰȘ USB"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Remove"
-msgstr "Ű§Ű­Ű°Ù"
+msgid "What norm is your TV using?"
+msgstr "ŰŁÙŠ Ù†ŰžŰ§Ù… ÙŠŰłŰȘŰźŰŻÙ…Ù‡ ŰŹÙ‡Ű§ŰČ Ű§Ù„ŰȘÙ„ÙŰ§ŰČ Ù„ŰŻÙŠÙƒŰŸ"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Modify"
-msgstr "ŰȘŰčŰŻÙŠÙ„"
+msgid "Type:"
+msgstr "Ű§Ù„Ù†ÙˆŰč:"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Add"
-msgstr "Ű§Ű¶Ű§ÙŰ©"
+msgid "Share name"
+msgstr "Ű§ŰłÙ… Ű§Ù„Ù…ŰŽŰ§Ű±ÙƒŰ©"
-#: ../../interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Choose a file"
-msgstr "Ű„ŰźŰȘ۱ ملف"
+msgid "enable"
+msgstr "ŰȘمكين"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
msgstr ""
-"Ù‡Ù†Ű§ يمكنك ۧ۟ŰȘÙŠŰ§Ű± ۧ۟ŰȘ۔ۧ۱ۧŰȘ Ù„ÙˆŰ­Ű© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­ Ű§Ù„ŰȘي \n"
-"ŰłŰȘŰłÙ…Ű­ لك ŰšŰ§Ù„ŰȘŰšŰŻÙŠÙ„ ŰšÙŠÙ† لŰșۧŰȘ Ù„ÙˆŰ­Ű© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­ Ű§Ù„Ù…ŰźŰȘÙ„ÙŰ©\n"
-"(Ù…Ű«Ù„Ű§Ù‹: Ù„Ű§ŰȘيني و ŰșÙŠŰ± Ù„Ű§ŰȘيني)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "مفŰȘۭۧ \"Windows\" Ű§Ù„ŰŁÙŠÙ…Ù†"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Left \"Windows\" key"
-msgstr "مفŰȘۭۧ \"Windows\" Ű§Ù„ŰŁÙŠŰłŰ±"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "\"Menu\" key"
-msgstr "مفŰȘۭۧ \"Menu\""
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Ù…ÙŰ§ŰȘÙŠŰ­ Alt و Shift في Ù†ÙŰł Ű§Ù„ÙˆÙ‚ŰȘ"
+"ŰŹŰ§Ű±ÙŠ Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšÙ…ÙˆÙ‚Űč Mandrake Linux Ù„Ù„Ű­Ű”ÙˆÙ„ Űčلى Ù‚Ű§ŰŠÙ…Ű© ŰšŰ§Ù„Ù…Ű±Ű§ÙŠŰ§ Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű©..."
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ù…ÙŰ§ŰȘÙŠŰ­ Ctrl و Alt في Ù†ÙŰł Ű§Ù„ÙˆÙ‚ŰȘ"
+msgid ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
+msgstr ""
+"ŰžÙ‡Ű±ŰȘ Ù…ŰŽÙƒÙ„Ű© ŰŁŰ«Ù†Ű§ŰĄ ۧŰčۧۯ۩ ŰȘŰŽŰșيل Ű§Ù„ŰŽŰšÙƒŰ©: \n"
+"\n"
+"%s"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "CapsLock key"
-msgstr "مفŰȘۭۧ CapsLock"
+msgid "Remove the loopback file?"
+msgstr "هل ŰȘŰ±ÙŠŰŻ ۧŰČŰ§Ù„Ű© ملف loopback۟"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Ù…ÙŰ§ŰȘÙŠŰ­ Control و Shift في Ù†ÙŰł Ű§Ù„ÙˆÙ‚ŰȘ"
+msgid "Selected size is larger than available space"
+msgstr "Ű§Ù„Ű­ŰŹÙ… Ű§Ù„Ù…ŰźŰȘۧ۱ ŰŁÙƒŰšŰ± من Ű§Ù„Ù…ŰłŰ§Ű­Ű© Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű©"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "مفŰȘŰ§Ű­ÙŠÙ‘ Shift في Ù†ÙŰł Ű§Ù„ÙˆÙ‚ŰȘ"
+msgid "NCP server name missing!"
+msgstr "Ű§ŰłÙ… ŰźŰ§ŰŻÙ… NCP Ù…ÙÙ‚ÙˆŰŻ!"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Right Alt key"
-msgstr "مفŰȘۭۧ Alt Ű§Ù„ŰŁÙŠÙ…Ù†"
+msgid "Please choose your country."
+msgstr "ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ ŰšÙ„ŰŻÙƒ."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Yugoslavian (latin)"
-msgstr "Ű§Ù„ÙŠÙˆŰșÙˆŰłÙ„Ű§ÙÙŠŰ© (Ù„Ű§ŰȘيني)"
+msgid "Hard Disk Backup files..."
+msgstr "Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ Ù„Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš..."
#: ../../keyboard.pm:1
#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Ű§ÙÙŠŰȘÙ†Ű§Ù…ÙŠŰ© \"Ű”Ù Ű±Ù‚Ù…ÙŠ\" QWERTY"
+msgid "Laotian"
+msgstr "Ű§Ù„Ù„Ű§ÙˆŰłÙŠŰ©"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "US keyboard (international)"
-msgstr "Ù„ÙˆŰ­Ű© Ù…ÙŰ§ŰȘÙŠŰ­ ŰŁÙ…Ű±ÙŠÙƒÙŠŰ© (ŰŻÙˆÙ„ÙŠ)"
+msgid "Samoa"
+msgstr "ŰłŰ§Ù…ÙˆŰ§"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "US keyboard"
-msgstr "Ù„ÙˆŰ­Ű© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­ Ű§Ù„ŰŁÙ…Ű±ÙŠÙƒÙŠŰ©"
+msgid ""
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
+msgstr ""
+"ŰšŰ±ÙˆŰȘوكول rstat ÙŠŰłÙ…Ű­ Ù„Ù„Ù…ŰłŰȘŰźŰŻÙ…ÙŠÙ† Űčلى Ű§Ù„ŰŽŰšÙƒŰ© ۚۧ۳ŰȘ۱ۏۧŰč\n"
+"Ű§Ű­Ű”Ű§ŰŠÙŠŰ§ŰȘ ۹ۯۧۥ ŰŁÙŠ ŰŹÙ‡Ű§ŰČ Űčلى Ù‡Ű°Ù‡ Ű§Ù„ŰŽŰšÙƒŰ©."
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "UK keyboard"
-msgstr "Ù„ÙˆŰ­Ű© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­ Ű§Ù„ŰšŰ±ÙŠŰ·Ű§Ù†ÙŠŰ©"
+msgid "Re-generating list of configured scanners ..."
+msgstr "ŰŹŰ§Ű±ÙŠ ۧŰčۧۯ۩ ŰȘÙˆÙ„ÙŠŰŻ Ù‚Ű§ŰŠÙ…Ű© Ű§Ù„Ù…Ű§ŰłŰ­Ű§ŰȘ Ű§Ù„Ű¶ÙˆŰŠÙŠŰ© Ű§Ù„Ù…ŰčŰŻÙ‘Ű© ..."
-#: ../../keyboard.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Ukrainian"
-msgstr "Ű§Ù„ŰŁÙˆÙƒŰ±Ű§Ù†ÙŠŰ©"
+msgid "Scanner"
+msgstr "Ű§Ù„Ù…Ű§ŰłŰ­ Ű§Ù„Ű¶ÙˆŰŠÙŠ"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Ű§Ù„ŰȘŰ±ÙƒÙŠŰ© (۷۱ۧŰČ \"Q\" Ű§Ù„Ű­ŰŻÙŠŰ«)"
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr "ŰȘŰ­Ű°ÙŠŰ±: ۧ۟ŰȘۚۧ۱ ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Űč۱۶ Ù‡Ű°Ù‡ Ù‚ŰŻ يŰȘ۳ۚ في Ű§ÙŠÙ‚Ű§Ù ŰŹÙ‡Ű§ŰČك"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Ű§Ù„ŰȘÙ‘Ű±ÙƒÙŠŰ© (۷۱ۧŰČ \"F\" Ű§Ù„ŰȘÙ‚Ù„ÙŠŰŻÙŠ)"
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr "Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… ÙŠŰŹŰš ŰŁÙ† ÙŠŰ­ŰȘوي ÙÙ‚Ű· Űčلى Ű§Ù„Ű­Ű±ÙˆÙ Ű§Ù„Ű”ŰșÙŠŰ±Ű©, Ű§Ù„ŰŁŰ±Ù‚Ű§Ù…, `-' و `_'"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Tajik keyboard"
-msgstr "Ù„ÙˆŰ­Ű© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­ Ű§Ù„Ű·Ű§ŰŹÙŠÙƒÙŠŰ©"
+msgid "Menudrake"
+msgstr "Menudrake"
-#: ../../keyboard.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Thai keyboard"
-msgstr "Ù„ÙˆŰ­Ű© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­ Ű§Ù„ŰȘŰ§ÙŠÙ„Ű§Ù†ŰŻÙŠŰ©"
+msgid "Welcome To Crackers"
+msgstr "Ù…Ű±Ű­ŰšŰ§ ŰšŰ§Ù„Ù…ŰźŰȘŰ±Ù‚ÙŠÙ†"
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "Ű§Ù„ŰȘŰ§Ù…ÙŠÙ„ (ŰąÙ„Ű© ÙƒŰ§ŰȘۚ۩)"
+msgid "Module options:"
+msgstr "ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„ÙˆŰ­ŰŻŰ©:"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr "Ű§Ù„ŰȘŰ§Ù…ÙŠÙ„ (ISCII)"
+msgid "Secure your networks with the Multi Network Firewall"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Serbian (cyrillic)"
-msgstr "Ű§Ù„Ű”Ű±ŰšÙŠŰ© (ŰłÙŠŰ±ÙŠÙ„ÙŠ)"
+msgid "Go on without configuring the network"
+msgstr "ŰȘۧۚŰč ŰŻÙˆÙ† ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰŽŰšÙƒŰ©"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Ű§Ù„ŰłÙ„ÙˆÙŰ§ÙƒÙŠŰ© (QWERTY)"
+msgid "Abort"
+msgstr "Ű„Ù†Ù‡Ű§ŰĄ"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Ű§Ù„ŰłÙ„ÙˆÙŰ§ÙƒÙŠŰ© (QWERTZ)"
+msgid "No password prompt on %s at port %s"
+msgstr "Ù„Ű§ ÙŠÙˆŰŹŰŻ Ű·Ù„Űš ÙƒÙ„Ù…Ű© ۳۱ في %s Űčلى Ű§Ù„Ù…Ù†ÙŰ° %s"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Slovenian"
-msgstr "Ű§Ù„ŰłÙ„ÙˆÙÙŠÙ†ÙŠŰ©"
+msgid "Please check if you want to use the non-rewinding device."
+msgstr ""
+"ÙŰ¶Ù„Ű§ قم ŰšŰ§Ù„ŰȘŰŁŰŽÙŠŰ± Ù‡Ù†Ű§ ۧ۰ۧ كنŰȘ ŰȘŰ±ÙŠŰŻ ۧ۳ŰȘŰźŰŻŰ§Ù… ŰŹÙ‡Ű§ŰČ ŰșÙŠŰ± Ù‚Ű§ŰšÙ„ Ù„Ù„Ű±ŰŹÙˆŰč Ű§Ù„Ù‰ Ű§Ù„ŰźÙ„Ù."
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Swedish"
-msgstr "Ű§Ù„ŰłÙˆÙŠŰŻÙŠŰ©"
+msgid "Usage of remote scanners"
+msgstr "ۧ۳ŰȘŰźŰŻŰ§Ù… Ű§Ù„Ù…Ű§ŰłŰ­Ű§ŰȘ Ű§Ù„Ű¶ÙˆŰŠÙŠŰ© Ű§Ù„ŰšŰčÙŠŰŻŰ©"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Russian (Yawerty)"
-msgstr "Ű§Ù„Ű±Ù‘ÙˆŰłÙŠŰ© (Yawerty)"
+msgid "\t-CDROM.\n"
+msgstr "\t-Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹ.\n"
-#: ../../keyboard.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Russian"
-msgstr "Ű§Ù„Ű±ÙˆŰłÙŠŰ©"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
+msgstr ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
#: ../../keyboard.pm:1
#, c-format
-msgid "Romanian (qwerty)"
-msgstr "Ű§Ù„Ű±ÙˆÙ…Ű§Ù†ÙŠŰ© (qwertz)"
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak (Ù†Ű±ÙˆÙŠŰŹÙŠŰ©Ù‘)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Romanian (qwertz)"
-msgstr "Ű§Ù„Ű±ÙˆÙ…Ű§Ù†ÙŠŰ© (qwertz)"
+msgid "Hard Disk Backup Progress..."
+msgstr "Ű§Ù„ŰȘÙ‚ŰŻÙ… في Ù†ŰłŰź Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš..."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Canadian (Quebec)"
-msgstr "Ű§Ù„ÙƒÙ†ŰŻÙŠÙ‘Ű© (ÙƒÙŠŰšÙŠÙƒ)"
+msgid "Unable to fork: %s"
+msgstr "ŰȘŰč۰۱ ŰȘÙ†ÙÙŠŰ°: %s"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Portuguese"
-msgstr "Ű§Ù„ŰšŰ±ŰȘŰșŰ§Ù„ÙŠŰ©"
+msgid "Type: "
+msgstr "Ű§Ù„Ù†ÙˆŰč: "
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Ű§Ù„ŰšÙˆÙ„Ù†ŰŻÙŠŰ© (qwertz layout)"
+msgid "<-- Edit Client"
+msgstr "<-- ŰȘŰ­Ű±ÙŠŰ± Ű§Ù„Űčميل"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Ű§Ù„ŰšÙˆÙ„Ù†ŰŻÙŠŰ© (qwerty layout)"
+msgid "no fonts found"
+msgstr "Ù„Ű§ ŰȘÙˆŰŹŰŻ ŰźŰ·ÙˆŰ·"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Norwegian"
-msgstr "Ű§Ù„Ù†Ű±ÙˆÙŠŰŹÙŠŰ©"
+msgid "Mouse"
+msgstr "Ű§Ù„ÙŰŁŰ±Ű©"
-#: ../../keyboard.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Dutch"
-msgstr "Ű§Ù„Ù‡ÙˆÙ„Ù†ŰŻÙŠŰ©"
+msgid "not enough room in /boot"
+msgstr "Ù„Ű§ ŰȘÙˆŰŹŰŻ Ù…ŰłŰ§Ű­Ùˆ ÙƒŰ§ÙÙŠŰ© في /boot"
-#: ../../keyboard.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Maltese (US)"
-msgstr "Ű§Ù„Ù…Ű§Ù„Ű·ÙŠŰ© (ŰŁÙ…Ű±ÙŠÙƒŰ§)"
+msgid "Choosing an arbitratry driver"
+msgstr "ŰŹŰ§Ű±ÙŠ ۧ۟ŰȘÙŠŰ§Ű± Ù…ŰŽŰșل ŰčŰ§Ù…"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Maltese (UK)"
-msgstr "Ű§Ù„Ù…Ű§Ù„Ű·ÙŠŰ© (ŰšŰ±ÙŠŰ·Ű§Ù†ÙŠŰ§)"
+msgid "Host name"
+msgstr "Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Ű§Ù„Ù…Ù†ŰșÙˆÙ„ÙŠŰ© (ŰłÙŠŰ±ÙŠÙ„ÙŠŰ©)"
+msgid "Liechtenstein"
+msgstr "Ù„ÙŠŰŽŰȘÙ†ŰŽŰȘŰ§ÙŠÙ†"
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Myanmar (Burmese)"
-msgstr "Ù…ÙŠŰ§Ù†Ù…Ű§Ű± (Ű§Ù„ŰšÙˆŰ±Ù…ÙŠŰ©)"
+msgid "the color of the progress bar"
+msgstr "لون ŰŽŰ±ÙŠŰ· Ű§Ù„ŰȘÙ‚ŰŻÙ…"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Macedonian"
-msgstr "Ű§Ù„Ù…Ù‚ŰŻÙˆÙ†ÙŠŰ©"
+msgid "Suppress Fonts Files"
+msgstr "ŰŁŰšŰ·Ù„ Ù…Ù„ÙŰ§ŰȘ Ű§Ù„ŰźŰ·ÙˆŰ·"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Malayalam"
-msgstr "Ű§Ù„Ù…Ű§Ù„Ű§ÙŠŰ§Ù„Ű§Ù…"
+msgid "Add to RAID"
+msgstr "Ű§Ű¶Ű§ÙŰ© Ű§Ù„Ù‰ RAID"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Latvian"
-msgstr "Ű§Ù„Ù„Ű§ŰȘÙÙŠŰ©"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
+"or a variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Ű§Ù„Ù„ÙŠŰȘÙˆŰ§Ù†ÙŠŰ© \"Ű”ÙˆŰȘي\" QWERTY"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr "ŰȘمŰȘ Ű§Ű¶Ű§ÙŰ© Ű§Ù„Ű·Ű§ŰšŰčŰ© \"%s\" Ű§Ù„Ù‰ Star Office/OpenOffice.org/GIMP ŰšÙ†ŰŹŰ§Ű­."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Ű§Ù„Ù„ÙŠŰȘÙˆŰ§Ù†ÙŠŰ© \"Ű”Ù Ű±Ù‚Ù…ÙŠ\" QWERTY"
+msgid "No floppy drive available!"
+msgstr "Ù„Ű§ ŰȘÙˆŰŹŰŻ ŰłÙˆŰ§Ù‚Ű© Ù‚Ű±Ű” Ù…Ű±Ù†!"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Ű§Ù„Ù„ÙŠŰȘÙˆŰ§Ù†ÙŠŰ© AZERTY (ŰŹŰŻÙŠŰŻ)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
+msgstr ""
+"للمŰčŰ±ÙŰ© Ű­ÙˆÙ„ Ű§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű© Ù„Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„Ű­Ű§Ù„ÙŠŰ©, Ű„Ù…Ű§ ŰŁÙ† ŰȘÙ‚Ű±ŰŁ Ű§Ù„Ù‚Ű§ŰŠÙ…Ű© ŰŁŰŻÙ†Ű§Ù‡ و "
+"Ű§Ù†Ù‚Ű± \"Ù‚Ű§ŰŠÙ…Ű© ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„Ű·Ű§ŰšŰčŰ©\".%s%s\n"
+"\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Ű§Ù„Ù„ÙŠŰȘÙˆŰ§Ù†ÙŠŰ© AZERTY (Ù‚ŰŻÙŠÙ…)"
+msgid "Continue anyway?"
+msgstr "هل ŰȘŰ±ÙŠŰŻ Ű§Ù„Ű§ÙƒÙ…Ű§Ù„ Űčلى ŰŁÙŠ Ű­Ű§Ù„ŰŸ"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Laotian"
-msgstr "Ű§Ù„Ù„Ű§ÙˆŰłÙŠŰ©"
+msgid ""
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
+msgstr ""
+"ۧ۰ۧ لم ŰȘكن ۷ۧۚŰčŰȘ Ù…ÙˆŰŹÙˆŰŻŰ© في Ű§Ù„Ù‚Ű§ŰŠÙ…Ű©, ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ ۷ۧۚŰčŰ© مŰȘÙˆŰ§ÙÙ‚Ű© (Ű§Ù†ŰžŰ± ŰŻÙ„ÙŠÙ„ "
+"Ű§Ù„Ű·Ű§ŰšŰčŰ©) ŰŁÙˆ ۧ۟ŰȘ۱ ۷ۧۚŰčŰ© Ù…Ù…Ű§Ű«Ù„Ű©."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Latin American"
-msgstr "Ű§Ù„ŰŁÙ…Ű±ÙŠÙƒÙŠŰ© Ű§Ù„Ù„Ű§ŰȘÙŠÙ†ÙŠŰ©"
+msgid "Printer"
+msgstr "۷ۧۚŰčŰ©"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Korean keyboard"
-msgstr "Ù„ÙˆŰ­Ű© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­ Ű§Ù„ÙƒÙˆŰ±ÙŠŰ©"
+msgid "Saudi Arabia"
+msgstr "Ű§Ù„ŰłŰčÙˆŰŻÙŠŰ©"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Japanese 106 keys"
-msgstr "Ű§Ù„ÙŠŰ§ŰšŰ§Ù†ÙŠŰ© 106 Ù…ÙŰ§ŰȘÙŠŰ­"
+msgid "Internet"
+msgstr "Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ"
-#: ../../keyboard.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Inuktitut"
-msgstr "Ű§ÙŠÙ†ÙˆÙƒŰȘيŰȘوŰȘ"
+msgid "Some devices were added:\n"
+msgstr "ŰȘمŰȘ Ű§Ű¶Ű§ÙŰ© ŰšŰč۶ Ű§Ù„ŰčŰȘۧۯ:\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Italian"
-msgstr "Ű§Ù„Ű„ÙŠŰ·Ű§Ù„ÙŠŰ©"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "Ű§Ù„Ù‡Ù†ŰŻŰłŰ©: %s Ű§ŰłŰ·ÙˆŰ§Ù†Ű©, %s ۱ۣ۳, %s Ù‚Ű·Ű§Űč\n"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Icelandic"
-msgstr "Ű§Ù„ŰąÙŠŰłÙ„Ű§Ù†ŰŻÙŠŰ©"
+msgid "Printing on the printer \"%s\""
+msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„Ű·ŰšŰ§ŰčŰ© Űčلى Ű§Ù„Ű·Ű§ŰšŰčŰ© \"%s\""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Iranian"
-msgstr "Ű§Ù„Ű„ÙŠŰ±Ű§Ù†ÙŠÙ‘Ű©"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr "/etc/hosts.allow و /etc/hosts.deny مŰčŰŻÙ‘Ű§Ù† Ù…ŰłŰšÙ‚Ű§Ù‹ - لم يŰȘم Ű§Ù„ŰȘŰșÙŠÙŠŰ±"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "Ű§Ù„ŰčŰšŰ±ÙŠŰ© (Ű”ÙˆŰȘÙŠŰ©)"
+msgid "Restore From Tape"
+msgstr "ۧ۳ŰȘŰčۧۯ۩ من Ű§Ù„ŰŽŰ±ÙŠŰ·"
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Israeli"
-msgstr "Ű§Ù„ŰčŰšŰ±ÙŠŰ©"
+msgid "Choose the profile to configure"
+msgstr "ۧ۟ŰȘ۱ Ű§Ù„ŰȘŰŽÙƒÙŠÙ„ Ű§Ù„Ű°ÙŠ ŰȘŰ±ÙŠŰŻ ŰȘÙ‡ÙŠŰŠŰȘه"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Croatian"
-msgstr "Ű§Ù„ÙƒŰ±ÙˆŰ§ŰȘÙŠŰ©"
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
+msgstr ""
+"\n"
+"\n"
+"ŰŁŰŻŰźÙ„ Ű§ŰłÙ… Ù…ŰłŰȘŰ¶ÙŠÙ Zeroconf ŰšŰŻÙˆÙ† ŰŁÙŠ Ù†Ù‚Ű§Ű· ۧ۰ۧ لم ŰȘكن ŰȘŰ±ÙŠŰŻ\n"
+"ۧ۳ŰȘŰźŰŻŰ§Ù… Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠ."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hungarian"
-msgstr "Ű§Ù„Ù…ŰŹŰ±ÙŠŰ©"
+msgid "Backup Now from configuration file"
+msgstr "قم ŰšŰ§Ù„Ù†ŰłŰź Ű§Ù„ŰąÙ† من ملف Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ©"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Gurmukhi"
-msgstr "ŰșÙˆŰ±Ù…ÙˆÙƒÙ‡ÙŠ"
+msgid "Mount points should contain only alphanumerical characters"
+msgstr "Ù†Ù‚Ű§ Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„ ÙŠŰŹŰš ŰŁÙ† ŰȘŰ­ŰȘوي ÙÙ‚Ű· Űčلى Ű§Ù„Ű­Ű±ÙˆÙ و/ŰŁÙˆ Ű§Ù„ŰąŰ±Ù‚Ű§Ù…"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Gujarati"
-msgstr "ŰșÙˆŰŹŰ§Ű±Ű§ŰȘي"
+msgid "Restarting printing system..."
+msgstr "ŰŹŰ§Ű±ÙŠ ۧŰčۧۯ۩ ŰȘŰŽŰșيل Ù†ŰžŰ§Ù… Ű§Ù„Ű·ŰšŰ§ŰčŰ©..."
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Greek"
-msgstr "Ű§Ù„ÙŠÙˆÙ†Ű§Ù†ÙŠŰ©"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
+msgstr ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Ű§Ù„ŰŹÙˆŰ±ŰŹÙŠŰ©Ù‘ (Ű§Ù„ŰȘŰ”Ù…ÙŠÙ… Ű§Ù„Ù„Ű§ŰȘيني)"
+msgid "See hardware info"
+msgstr "Űč۱۶ مŰčÙ„ÙˆÙ…Ű§ŰȘ Ű§Ù„ŰčŰȘۧۯ"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Ű§Ù„ŰŹÙˆŰ±ŰŹÙŠŰ© (Ű§Ù„ŰȘŰ”Ù…ÙŠÙ… Ű§Ù„Ű±ÙˆŰłÙŠ)"
+msgid "First sector of boot partition"
+msgstr "Ű§Ù„Ù‚Ű·Ű§Űč Ű§ÙˆÙ„ من ŰȘŰŹŰČŰŠŰ© Ű§Ù„Ű„Ù‚Ù„Ű§Űč"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "French"
-msgstr "Ű§Ù„ÙŰ±Ù†ŰłÙŠŰ©"
+msgid "Printer manufacturer, model"
+msgstr "Ù…Ű”Ù†Ù‘Űč Ű§Ù„Ű·Ű§ŰšŰčŰ©, Ű§Ù„Ű·Ű±Ű§ŰČ"
-#: ../../keyboard.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Finnish"
-msgstr "Ű§Ù„ÙÙ†Ù„Ù†ŰŻÙŠŰ©"
+msgid "PDQ - Print, Don't Queue"
+msgstr "PDQ - Print, Don't Queue"
-#: ../../keyboard.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Spanish"
-msgstr "Ű§Ù„Ű„ŰłŰšŰ§Ù†ÙŠŰ©"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
+msgstr ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Estonian"
-msgstr "Ű§Ù„Ű„ŰłŰȘÙˆÙ†ÙŠŰ©"
+msgid "Subnet Mask:"
+msgstr "Subnet Mask:"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (ŰłÙˆÙŠŰŻÙŠŰ©)"
+msgid "LiLo and Bootsplash themes installation successfull"
+msgstr "ŰȘم ŰȘŰ«ŰšÙŠŰȘ ŰłÙ…Ű§ŰȘ LiLo و Bootsplash ŰšÙ†ŰŹŰ§Ű­"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Ù†Ű±ÙˆÙŠŰŹÙŠŰ©Ù‘)"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"Ű§Ù„Ù…ŰčŰ§Ù…Ù„Ű§Ù† Ű§Ù„Ù…Ù‡Ù…Ű§Ù† ۏۯۧ Ù‡Ù…Ű§ Ù†ŰłŰšŰ© Ű§Ù„Ű„Ù†Űčۧێ Ű§Ù„ŰŁÙÙ‚ÙŠ, و هي Ű§Ù„Ù†ŰłŰšŰ© Ű§Ù„ŰȘي\n"
+"يŰȘم ÙÙŠÙ‡Ű§ Ű§Ù†Űčۧێ Ű§Ù„ŰŽŰ§ŰŽŰ© ÙƒŰ§Ù…Ù„Ű©, و Ű§Ù„ŰŁÙ‡Ù… هو Ù†ŰłŰšŰ© Ű§Ù„ŰȘŰČŰ§Ù…Ù† Ű§Ù„ŰŁÙÙ‚ÙŠ\n"
+"و Ű§Ù„ŰȘي في ŰźÙ„Ű§Ù„Ù‡Ű§ يŰȘم Űč۱۶ ŰźŰ·ÙˆŰ· Ű§Ù„Ù…ŰłŰ­.\n"
+"\n"
+"من *Ű§Ù„Ù…Ù‡Ù… ۏۯۧ* ŰŁÙ† Ù„Ű§ ŰȘŰ­ŰŻŰŻ نوŰč ێۧێ۩ مŰč مŰȘÙˆŰłŰ· ŰȘŰČŰ§Ù…Ù†\n"
+"ŰŁÙƒŰšŰ± من Ù…Ù‚ŰŻŰ±Ű© ێۧێŰȘك Ù„ŰŁÙ†Ùƒ ŰšÙ‡Ű°Ű§ Ù‚ŰŻ ŰȘŰŻÙ…Ű± ێۧێŰȘك.\n"
+" ۧ۰ۧ لم ŰȘكن مŰȘŰŁÙƒŰŻŰ§ يمكنك ۧ۟ŰȘÙŠŰ§Ű± ۧŰčۯۧۯۧŰȘ ŰčŰ§ŰŻÙŠŰ©."
-# U+200F (RTL mark) has been inserted between "Dvorak" and "(US)", so
-# it displays on screen as "(US) Dvorak", following the same schema
-# as others "Dvorak (xxxx)" with xxx in Arabic that display as "(xxxx) Dvorak"
-# that way the entry is also listed together with the other "Dvorak" entries.
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak‏ (US)"
+msgid "Modify"
+msgstr "ŰȘŰčŰŻÙŠÙ„"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Danish"
-msgstr "Ű§Ù„ŰŻÙ†Ù…Ű§Ű±ÙƒÙŠŰ©"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
+"\n"
+"Ű§Ù„ŰŁÙˆŰ§Ù…Ű± \"%s\" و \"%s\" ŰȘŰłÙ…Ű­ لك ŰšŰȘŰčŰŻÙŠÙ„ ۧŰčۯۧۯۧŰȘ Ű§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ Ù„ÙˆŰžÙŠÙŰ© ۷ۚۧŰčŰ© Ù…Ű­ŰŻŰŻŰ©. "
+"ۚۚ۳ۧ۷۩ قم ŰšŰ„Ű¶Ű§ÙŰ© Ű§Ù„Ű„Űčۯۧۯ Ű§Ù„Ù…Ű·Ù„ÙˆŰš Ű§Ù„Ù‰ ۳۷۱ Ű§Ù„ŰąÙˆŰ§Ù…Ű±, Ù…Ű«Ű§Ù„ \"%s <file>\".\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Devanagari"
-msgstr "ŰŻÙŠÙŰ§Ù†ŰșŰ§Ű±ÙŠ"
+msgid "Need hostname, username and password!"
+msgstr "ÙŠÙŰ­ŰȘۧۏ Ű§Ù„Ù‰ Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ و Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… و ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ±!"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "German (no dead keys)"
-msgstr "Ű§Ù„ŰŁÙ„Ù…Ű§Ù†ÙŠŰ© (Ù„Ű§ Ù…ÙŰ§ŰȘÙŠŰ­ ميŰȘŰ©)"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
+"WebDAV هو ۚ۱ŰȘوكول ÙŠŰłÙ…ŰŹ لك ŰšŰȘŰ­Ù…ÙŠÙ„ ŰŻÙ„ÙŠÙ„ في ŰźŰ§ŰŻÙ… Ű§Ù„ÙˆÙŠŰš ŰšŰŽÙƒÙ„\n"
+"Ù…Ű­Ù„ÙŠ, و مŰčŰ§Ù…Ù„ŰȘه ÙƒÙ†ŰžŰ§Ù… Ù…Ù„ÙŰ§ŰȘ Ù…Ű­Ù„ÙŠ (ÙŠŰŹŰš ŰŁÙ† يكون ŰźŰ§ŰŻÙ… Ű§Ù„ÙˆÙŠŰš مŰčŰŻÙ‘\n"
+"ÙƒŰźŰ§ŰŻÙ… WebDAV). ۧ۰ۧ كنŰȘ ŰȘŰ±ÙŠŰŻ Ű§Ű¶Ű§ÙŰ© Ù†Ù‚Ű§Ű· ŰȘŰ­Ù…ÙŠÙ„\n"
+"WebDAV, ۧ۟ŰȘ۱ \"ŰŹŰŻÙŠŰŻ\"."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "German"
-msgstr "Ű§Ù„ŰŁÙ„Ù…Ű§Ù†ÙŠŰ©"
+msgid "HardDrake"
+msgstr "HardDrake"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Czech (QWERTY)"
-msgstr "Ű§Ù„ŰȘŰŽÙŠÙƒÙŠŰ© (QWERTY)"
+msgid "new"
+msgstr "ŰŹŰŻÙŠŰŻ"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Czech (QWERTZ)"
-msgstr "Ű§Ù„ŰȘŰŽÙŠÙƒÙŠŰ© (QWERTZ)"
+msgid "Would you like to try again?"
+msgstr "هل ŰȘŰ±ÙŠŰŻ Ű§Ù„Ù…Ű­Ű§ÙˆÙ„Ű© Ù…Ű±Ű©Ù‹ ŰŁŰźŰ±Ù‰ŰŸ"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Swiss (French layout)"
-msgstr "Ű§Ù„ŰłÙˆÙŠŰłŰ±ÙŠŰ© (ŰȘŰ”Ù…ÙŠÙ… ÙŰ±Ù†ŰłÙŠ)"
+msgid "Wizard"
+msgstr "Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Swiss (German layout)"
-msgstr "Ű§Ù„ŰłÙˆÙŠŰłŰ±ÙŠŰ© (ŰȘŰ”Ù…ÙŠÙ… ŰŁÙ„Ù…Ű§Ù†ÙŠ)"
+msgid "Edit selected server"
+msgstr "ۭ۱۱ Ű§Ù„ŰźŰ§ŰŻÙ… Ű§Ù„Ù…ŰźŰȘۧ۱"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belarusian"
-msgstr "Ű§Ù„ŰšÙŠÙ„Ű§Ű±ÙˆŰłÙŠŰ©"
+msgid "Please choose where you want to backup"
+msgstr "۱ۏۧۥ ۧ۟ŰȘ۱ ŰŁÙŠÙ† ŰȘŰ±ÙŠŰŻ Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű§Ű­ŰȘÙŠŰ§Ű·ÙŠ."
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bosnian"
-msgstr "Ű§Ù„ŰšÙˆŰłÙ†ÙŠŰ©"
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr "ŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ ۧŰčۯۧ۩ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ لŰȘفŰčيل Ű§Ù„ŰȘŰčŰŻÙŠÙ„Ű§ŰȘ Űčلى ŰŹŰŻÙˆÙ„ Ű§Ù„ŰȘŰŹŰČۊۧŰȘ"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "Ű§Ù„ŰšŰ±Ű§ŰČÙŠÙ„ÙŠŰ© (ABNT-2)"
+msgid "Do not include the browser cache"
+msgstr "Ù„Ű§ ŰȘŰłŰȘŰźŰŻÙ… Ű°Ű§ÙƒŰ±Ű© Ű§Ù„Ù…ŰȘŰ”ÙŰ­ Ű§Ù„Ù…ŰźŰšŰŠÙŠŰ©"
-#: ../../keyboard.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Bulgarian (BDS)"
-msgstr "Ű§Ù„ŰšÙ„ŰșŰ§Ű±ÙŠŰ© (BDS)"
+msgid "Please, choose your keyboard layout."
+msgstr "من ÙŰ¶Ù„Ùƒ ۧ۟ŰȘ۱ ŰȘŰ”Ù…ÙŠÙ… Ù„ÙˆŰ­Ű© Ù…ÙŰ§ŰȘÙŠŰ­Ùƒ"
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "Ű§Ù„ŰšÙ„ŰșŰ§Ű±ÙŠŰ© (Ű”ÙˆŰȘÙŠŰ©)"
+msgid "Standard"
+msgstr "Ű§Ù„Ù‚ÙŠŰ§ŰłÙŠ"
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Bengali"
-msgstr "Ű§Ù„ŰšÙ†ŰșŰ§Ù„ÙŠŰ©"
+msgid "Please choose your mouse type."
+msgstr "ÙŰ¶Ù„Ű§Ù‹, ۧ۟ŰȘ۱ نوŰč Ű§Ù„ÙŰŁŰ±Ű© Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙƒ."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Belgian"
-msgstr "Ű§Ù„ŰšÙ„ŰŹÙŠÙƒÙŠŰ©"
+msgid "Connect..."
+msgstr "ۧŰȘŰ”Ù„..."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "Ű§Ù„ŰŁŰ°Ű±ŰšÙŠŰŹŰ§Ù†ÙŠŰ© (Ù„Ű§ŰȘيني)"
+msgid "Failed to configure printer \"%s\"!"
+msgstr "ŰȘŰč۰۱ŰȘ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Ű·Ű§ŰšŰčŰ© \"%s\"!"
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Arabic"
-msgstr "Ű§Ù„ŰčŰ±ŰšÙŠŰ©"
+msgid "not configured"
+msgstr "ŰșÙŠŰ± مŰčŰŻÙ‘"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Armenian (phonetic)"
-msgstr "Ű§Ù„ŰŁŰ±Ù…ÙŠÙ†ÙŠŰ© (Ű”ÙˆŰȘي)"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Armenian (typewriter)"
-msgstr "Ű§Ù„ŰŁŰ±Ù…ÙŠÙ†ÙŠŰ© (ŰąÙ„Ű© ÙƒŰ§ŰȘۚ۩)"
+msgid "About"
+msgstr "Ű­ÙˆÙ„"
-#: ../../keyboard.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Armenian (old)"
-msgstr "Ű§Ù„ŰŁŰ±Ù…ÙŠÙ†ÙŠŰ© (Ù‚ŰŻÙŠÙ…)"
+msgid "Proxies configuration"
+msgstr "ۧŰčۯۧۯۧŰȘ Ű§Ù„ŰšŰ±ÙˆÙƒŰłÙŠ"
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Albanian"
-msgstr "Ű§Ù„ŰŁÙ„ŰšŰ§Ù†ÙŠŰ©Ù‘"
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Polish"
-msgstr "Ű§Ù„ŰšÙˆÙ„Ù†ŰŻÙŠŰ©"
+msgid "Start: sector %s\n"
+msgstr "Ű§Ù„ŰšŰŻŰ§ÙŠŰ©: Ù‚Ű·Ű§Űč %s\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Dvorak"
-msgstr "Dvorak"
+msgid "Network interface already configured"
+msgstr "ÙˆŰ§ŰŹÙ‡Ű© Ű§Ù„ŰŽŰšÙƒŰ© مŰčŰŻÙ‘Ű© Ù…ŰłŰšÙ‚Ű§!"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Zimbabwe"
-msgstr "ŰČÙŠÙ…ŰšŰ§ŰšÙˆÙŠ"
+msgid "Couldn't access the floppy!"
+msgstr "ŰȘŰč۰۱ Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…Ű±Ù†!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Zambia"
-msgstr "ŰČŰ§Ù…ŰšÙŠŰ§"
+msgid "connecting to Bugzilla wizard ..."
+msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšÙ…ŰčŰ§Ù„ŰŹ Bugzilla ..."
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "South Africa"
-msgstr "ŰŹÙ†ÙˆŰš ŰŁÙŰ±ÙŠÙ‚ÙŠŰ§ "
+msgid "Mail Server"
+msgstr "ŰźŰ§ŰŻÙ… ŰšŰ±ÙŠŰŻ"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Serbia"
-msgstr "Ű”Ű±ŰšÙŠŰ§"
+msgid "Please click on a partition"
+msgstr "ÙŰ¶Ù„Ű§ ۧ۶ŰșŰ· Űčلى ŰȘŰŹŰČŰŠŰ©"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Mayotte"
-msgstr "Ù…Ű§ÙŠÙˆŰȘ"
+msgid "Linux"
+msgstr "Ù„ÙŠÙ†ÙƒŰł"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Yemen"
-msgstr "Ű§Ù„ÙŠÙ…Ù†"
+msgid "Have a nice day!"
+msgstr "نŰȘمنى لك ÙŠÙˆÙ…Ű§Ù‹ ŰłŰčÙŠŰŻŰ§Ù‹!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Samoa"
-msgstr "ŰłŰ§Ù…ÙˆŰ§"
+msgid "across Network"
+msgstr "Űčۚ۱ Ű§Ù„ŰŽÙ‘ŰšÙƒŰ©"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Wallis and Futuna"
-msgstr "ÙˆŰ§Ù„ÙŠŰł و فوŰȘÙˆÙ†Ű§"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Vanuatu"
-msgstr "ÙŰ§Ù†Ű§ŰȘو"
+msgid "Upgrade %s"
+msgstr "ŰȘŰ±Ù‚ÙŠŰ© %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Vietnam"
-msgstr "فييŰȘÙ†Ű§Ù…"
+msgid "Select Printer Connection"
+msgstr "ۧ۟ŰȘ۱ ÙˆŰ”Ù„Ű© Ű§Ù„Ű·Ű§ŰšŰčŰ©"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Ű§Ù„ŰŹŰČ۱ Ű§Ù„Űč۰۱ۧۥ (Ű§Ù„ÙˆÙ„Ű§ÙŠŰ§ŰȘ Ű§Ù„Ù…ŰȘŰ­ŰŻŰ©)"
+msgid "Scanning for TV channels in progress ..."
+msgstr "Ű¶ÙŠŰ· Ù‚Ù†ÙˆŰ§ŰȘ Ű§Ù„ŰȘÙ„ÙŰ§ŰČ ÙÙŠ ŰȘÙ‚ŰŻÙ… ..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Virgin Islands (British)"
-msgstr "Ű§Ù„ŰŹŰČ۱ Ű§Ù„Űč۰۱ۧۥ (ŰšŰ±ÙŠŰ·Ű§Ù†ÙŠŰ§)"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
+"۟۷ۣ ŰŁŰ«Ù†Ű§ŰĄ Ű§Ű±ŰłŰ§Ù„ Ű§Ù„Ù…Ù„Ù ŰčÙŠŰ± FTP.\n"
+" ÙŰ¶Ù„Ű§Ù‹ قم ŰšŰȘŰ”Ű­ÙŠŰ­ ۧŰčۯۧۯۧŰȘ FTP."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Venezuela"
-msgstr "فينŰČÙˆÙŠÙ„Ű§"
+msgid "IP Range Start:"
+msgstr "IP Range Start:"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "ŰłŰ§Ù†ŰȘ ÙÙŠÙ†ŰłÙ†ŰȘ و Ű§Ù„ŰșŰ±ÙŠÙ†Ű§ŰŻÙŠÙ†"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"Ù…Ű±Ű§Ù‚Űš Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ Ű§Ù„ŰŁŰłŰ§ŰłÙŠ (ÙŠŰłÙ…Ù‰ ŰčŰ§ŰŻŰ©Ù‹ ŰšÙ€ inetd) ÙŠŰšŰŻŰŁ\n"
+"Ù…ŰŹÙ…ÙˆŰčŰ© من ŰźŰŻÙ…Ű§ŰȘ Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ Ű§Ù„ŰŁŰźŰ±Ù‰ ŰčÙ†ŰŻ Ű§Ù„Ű­Ű§ŰŹŰ©. Ű§Ù†Ù‡ Ù…ŰłŰ€ÙˆÙ„ Űčن ۚۯۥ\n"
+"Ű§Ù„ŰčŰŻÙŠŰŻ من Ű§Ù„ŰźŰŻÙ…Ű§ŰȘ, ŰšÙ…Ű§ ÙÙŠÙ‡Ű§ telnet, ftp, rsh, و rlogin. ŰȘŰčŰ·ÙŠÙ„ inetd ŰłÙŠŰčŰ·Ù„\n"
+"كل Ű§Ù„ŰźŰŻÙ…Ű§ŰȘ Ű§Ù„Ù…Ű°ÙƒÙˆŰ±Ű©."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Vatican"
-msgstr "Ű§Ù„ÙŰ§ŰȘÙŠÙƒŰ§Ù†"
+msgid "the height of the progress bar"
+msgstr "ۧ۱ŰȘÙŰ§Űč ŰŽŰ±ÙŠŰ· Ű§Ù„ŰȘÙ‚ŰŻÙ…"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Uzbekistan"
-msgstr "ŰŁÙˆŰČŰšÙƒŰłŰȘŰ§Ù†"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
+"\n"
+"- Ű§Ű­ÙŰž Űčۚ۱ %s Űčلى Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ: %s\n"
-#: ../../lang.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Uruguay"
-msgstr "ŰŁÙˆŰ±ÙˆŰșÙˆŰ§ÙŠ"
+msgid "Argentina"
+msgstr "Ű§Ù„ŰŁŰ±ŰŹÙ†ŰȘين "
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "ŰŹŰČ۱ Ű§Ù„ÙˆÙ„Ű§ÙŠŰ§ŰȘ Ű§Ù„Ù…ŰȘŰ­ŰŻŰ©"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
-#: ../../lang.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Uganda"
-msgstr "ŰŁÙˆŰșÙ†ŰŻŰ§"
+msgid "Domain Name Server"
+msgstr "ŰźŰ§ŰŻÙ… Ű§ŰłÙ… Ű§Ù„Ù†Ű·Ű§Ù‚"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Ukraine"
-msgstr "ŰŁÙˆÙƒŰ±Ű§Ù†ÙŠŰ§"
+msgid "Security Level:"
+msgstr "Ù…ŰłŰȘوى Ű§Ù„ŰŁÙ…Ù†:"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Tanzania"
-msgstr "ŰȘنŰČŰ§Ù†ÙŠŰ§"
+msgid "Mount points must begin with a leading /"
+msgstr "ÙŠŰŹŰš ŰŁÙ† ŰȘۚۯۣ Ù†Ù‚Ű§Ű· Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„ ŰšŰ§Ù„ŰčÙ„Ű§Ù…Ű© /"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Taiwan"
-msgstr "ŰȘŰ§ÙŠÙˆŰ§Ù†"
+msgid "Postfix Mail Server"
+msgstr "ŰźŰ§ŰŻÙ… Ű§Ù„ŰšŰ±ÙŠŰŻ Postfix"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Tuvalu"
-msgstr "ŰȘÙˆÙŰ§Ù„Ùˆ"
+msgid "Quit without saving"
+msgstr "Ű§Ù„ŰźŰ±ÙˆŰŹ ŰšŰŻÙˆÙ† Ű§Ù„Ű­ÙŰž"
#: ../../lang.pm:1
#, c-format
-msgid "Trinidad and Tobago"
-msgstr "ŰȘŰ±ÙŠÙ†ÙŠŰ§ŰŻ و ŰȘÙˆŰšŰ§ŰŹÙˆ"
+msgid "Yemen"
+msgstr "Ű§Ù„ÙŠÙ…Ù†"
-#: ../../lang.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Turkey"
-msgstr "ŰȘŰ±ÙƒÙŠŰ§"
+msgid "This product is available on the MandrakeStore Web site."
+msgstr "Ù‡Ű°Ű§ Ű§Ù„Ù…Ù†ŰȘŰŹ مŰȘÙˆÙŰ± Űčلى موقŰč MandrakeStore"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Tonga"
-msgstr "ŰȘÙˆÙ†ŰŹÙˆ"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr ""
+"ÙŰ¶Ù„Ű§Ù‹ ŰŁŰŻŰźÙ„ Ű§Ù„Ű­ŰŹÙ… Ű§Ù„ŰŁÙ‚Ű”Ù‰\n"
+" Ű§Ù„Ù…ŰłÙ…ÙˆŰ­ ŰšÙ‡ لـDrakbackup"
-#: ../../lang.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Tunisia"
-msgstr "ŰȘÙˆÙ†Űł"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr "=> There are many things to choose from (%s).\n"
-#: ../../lang.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Turkmenistan"
-msgstr "ŰȘŰ±ÙƒÙ…Ű§Ù†ŰłŰȘŰ§Ù†"
+msgid "Hard drive detection"
+msgstr "Ű§Ù„ŰȘŰ­Ù‚Ù‚ من Ű§Ù„ŰŁÙ‚Ű±Ű§Ű” Ű§Ù„Ű”Ù„ŰšŰ©"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "East Timor"
-msgstr "ŰȘÙŠÙ…ÙˆŰ± Ű§Ù„ŰŽŰ±Ù‚ÙŠŰ©"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
+"لم ŰȘŰźŰȘ۱ ŰŁÙŠ Ù…ŰŹÙ…ÙˆŰčŰ© من Ű§Ù„Ű­ŰČم.\n"
+"ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ù…Ű”Űș۱ Ű§Ù„Ű°ÙŠ ŰȘŰ±ÙŠŰŻÙ‡:"
-#: ../../lang.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Tokelau"
-msgstr "ŰȘÙˆÙƒÙ„Ű§Ùˆ"
+msgid "Please enter the WebDAV server URL"
+msgstr "۱ۏۧۥ ŰŁŰŻŰźÙ„ ŰčÙ†ÙˆŰ§Ù† ŰźŰ§ŰŻÙ… WebDav"
#: ../../lang.pm:1
#, c-format
msgid "Tajikistan"
msgstr "Ű·Ű§ŰŹÙƒŰłŰȘŰ§Ù†"
-#: ../../lang.pm:1
-#, c-format
-msgid "Thailand"
-msgstr "ŰȘŰ§ÙŠÙ„Ű§Ù†ŰŻ"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Togo"
-msgstr "ŰȘÙˆŰŹÙˆ"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "French Southern Territories"
-msgstr "Ù…Ù†Ű§Ű·Ù‚ ŰŹÙ†ÙˆŰš ÙŰ±Ù†ŰłŰ§"
-
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Chad"
-msgstr "ŰȘێۧۯ"
+msgid "Accept"
+msgstr "Ű§Ù‚ŰšÙ„"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "ŰŹŰČ۱ Ű§Ù„ŰȘŰ±Ùƒ و Ű§Ù„ÙƒŰ§ÙŠÙƒÙˆŰł"
+msgid "Description"
+msgstr "Ű§Ù„ÙˆŰ”Ù"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Swaziland"
-msgstr "ŰłÙˆŰ§ŰČÙŠÙ„Ű§Ù†ŰŻ"
+msgid "Error opening %s for writing: %s"
+msgstr " فŰȘŰ­Ű© Ű§Ù„ŰźŰ·Ű„ %s للكŰȘۧۚ۩ :%s"
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Syria"
-msgstr "ŰłÙˆŰ±ÙŠŰ©"
+msgid "Mouse type: %s\n"
+msgstr "نوŰč Ű§Ù„ÙŰŁŰ±Ű©: %s\n"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "El Salvador"
-msgstr "Ű§Ù„ŰłÙ„ÙŰ§ŰŻÙˆŰ±"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr "يمكن Ù„ŰšŰ·Ű§Ù‚ŰȘك Ű§Ù„Ű­Ű”ÙˆÙ„ Űčلى ŰŻŰčم للŰȘŰłŰ±ÙŠŰč Ű«Ù„Ű§Ű«ÙŠ Ű§Ù„ŰŁŰšŰčۧۯ مŰč XFree %s"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sao Tome and Principe"
-msgstr "ŰłŰ§Ùˆ ŰȘومي و Ű§Ù„ŰšŰ±ÙŠÙ†ŰłÙŠŰš"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ Ù…ŰłŰ§Ű­Ű© ÙˆŰłÙŠŰ· CD/DVD (ŰšŰ§Ù„Ù…ÙŠŰșŰ§ŰšŰ§ÙŠŰȘ)"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Suriname"
-msgstr "ŰłÙˆŰ±ÙŠÙ†Ű§Ù…"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Somalia"
-msgstr "Ű§Ù„Ű”ÙˆÙ…Ű§Ù„"
+msgid "Expert Area"
+msgstr "Ù…Ù†Ű·Ù‚Ű© Ű§Ù„ŰźŰšŰ±Ű§ŰĄ"
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Senegal"
-msgstr "Ű§Ù„ŰłÙ†ŰșŰ§Ù„"
+msgid "Choose a monitor"
+msgstr "Ű„ŰźŰȘ۱ ێۧێ۩"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "San Marino"
-msgstr "ŰłŰ§Ù† Ù…Ű§Ű±ÙŠÙ†Ùˆ"
+msgid "Empty label not allowed"
+msgstr "ŰșÙŠŰ± Ù…ŰłÙ…ÙˆŰ­ ŰšŰ§Ù„ŰčÙ„Ű§Ù…Ű§ŰȘ Ű§Ù„ÙŰ§Ű±ŰșŰ©"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Sierra Leone"
-msgstr "ŰłÙŠŰ±Ű§Ù„ÙŠÙˆÙ†"
+msgid "Maltese (UK)"
+msgstr "Ű§Ù„Ù…Ű§Ù„Ű·ÙŠŰ© (ŰšŰ±ÙŠŰ·Ű§Ù†ÙŠŰ§)"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Slovakia"
-msgstr "ŰłÙ„ÙˆÙŰ§ÙƒÙŠŰ§"
+msgid "I can't add any more partition"
+msgstr "Ù„Ű§ يمكنني Ű§Ű¶Ű§ÙŰ© ŰŁÙŠ ŰȘŰŹŰČŰŠŰ© ŰŁŰźŰ±Ù‰"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "ŰŹŰČ۱ ŰłÙŰ§Ù„ŰšŰ§Ű±ŰŻ و ŰŹŰ§Ù† Ù…Ű§ÙŠÙ†"
+msgid "Size in MB: "
+msgstr "Ű§Ù„Ű­ŰŹÙ… ŰšŰ§Ù„ÙŠŰșŰ§ŰšŰ§ÙŠŰȘ: "
-#: ../../lang.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Slovenia"
-msgstr "ŰłÙ„ÙˆÙÙŠÙ†ÙŠŰ§"
+msgid "Remote printer"
+msgstr "۷ۧۚŰčŰ© ŰšŰčÙŠŰŻŰ©"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Saint Helena"
-msgstr "ŰłŰ§Ù†ŰȘ Ù‡ÙŠÙ„Ű§Ù†Ű©"
+msgid "Please choose a language to use."
+msgstr "۱ۏۧۥ ۧ۟ŰȘ۱ لŰșŰ© Ű§Ù„Ű§ŰłŰȘŰźŰŻŰ§Ù…."
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Singapore"
-msgstr "ŰłÙ†ŰșŰ§ÙÙˆŰ±Ű©"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
+"ŰȘŰ­Ű°ÙŠŰ±: ŰȘمŰȘ ŰȘÙ‡ÙŠŰŠŰ© Ù‡Ű°Ű§ Ű§Ù„ŰŹÙ‡Ű§ŰČ ŰłŰ§ŰšÙ‚Ű§Ù‹ Ù„Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ.\n"
+"ŰšÙƒÙ„ ۚ۳ۧ۷۩ Ű§Ù‚ŰšÙ„ ŰŁÙ† ŰȘÙŰšÙ‚ÙŠ Ù‡Ű°Ű§ Ű§Ù„ŰŹÙ‡Ű§ŰČ Ù…ŰčŰŻÙ‘.\n"
+"ŰȘŰčŰŻÙŠÙ„ Ű§Ù„Ű­Ù‚ÙˆÙ„ ŰŁŰŻÙ†Ű§Ù‡ ŰłÙŠŰșÙŠÙ‘Ű± Ù‡Ű°Ù‡ Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ©."
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Sudan"
-msgstr "Ű§Ù„ŰłÙˆŰŻŰ§Ù†"
+msgid "I can set up your computer to automatically log on one user."
+msgstr "يمكن ۧŰčۯۧۯ ŰŹÙ‡Ű§ŰČك لŰȘŰłŰŹÙŠÙ„ Ű§Ù„ŰŻŰźÙˆÙ„ ŰąÙ„ÙŠŰ§Ù‹ Ù„Ù…ŰłŰȘŰźŰŻÙ… مŰčين."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Seychelles"
-msgstr "ŰŹŰČ۱ ŰłÙŠŰŽÙ„"
+msgid "Floppy format"
+msgstr "Ù†ŰłÙ‚ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Solomon Islands"
-msgstr "ŰŹŰČ۱ ŰłÙ„ÙŠÙ…Ű§Ù†"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Saudi Arabia"
-msgstr "Ű§Ù„ŰłŰčÙˆŰŻÙŠŰ©"
+msgid "Generic Printers"
+msgstr "۷ۧۚŰčۧŰȘ ŰčŰ§ŰŻÙŠŰ© (Generic)"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Rwanda"
-msgstr "Ű±ÙˆŰ§Ù†ŰŻŰ§"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
+msgstr ""
+"ÙŰ¶Ù„Ű§Ù‹ ŰŁŰŻŰźÙ„ Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„ŰȘي ÙŠŰŹŰš ŰŁÙ† ŰȘŰ°Ù‡Űš Ű§Ù„ÙŠÙ‡Ű§ ÙˆŰžŰ§ŰŠÙ Ű§Ù„Ű·ŰšŰ§ŰčŰ© ŰŁÙˆ ŰŁŰŻŰźÙ„ Ű§ŰłÙ… ŰŹÙ‡Ű§ŰČ/Ű§ŰłÙ… "
+"ملف في Ű­Ù‚Ù„ Ű§Ù„Ű„ŰŻŰźŰ§Ù„"
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Russia"
-msgstr "Ű±ÙˆŰłÙŠŰ§"
+msgid "The scanners on this machine are available to other computers"
+msgstr "Ű§Ù„Ù…Ű§ŰłŰ­Ű§ŰȘ Ű§Ù„Ű¶ÙˆŰŠÙŠŰ© Űčلى Ù‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű© مŰȘÙˆÙŰ±Ű© Ù„Ù„Ű­ÙˆŰ§ŰłÙŠŰš Ű§Ù„ŰŁŰźŰ±Ù‰"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Romania"
-msgstr "Ű±ÙˆÙ…Ű§Ù†ÙŠŰ§"
+msgid "First sector of the root partition"
+msgstr "Ű§Ù„Ù‚Ű·Ű§Űč Ű§Ù„ŰŁÙˆÙ„ من Ű§Ù„ŰȘŰŹŰČŰŠŰ© Ű§Ù„ŰŹŰ°Ű±ÙŠŰ©"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Reunion"
-msgstr "Ű±ÙŠÙˆÙ†ÙŠÙˆÙ†"
+msgid "Alternative drivers"
+msgstr "Ù…ŰŽŰșÙ„Ű§ŰȘ ŰšŰŻÙŠÙ„Ű©"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Qatar"
-msgstr "Ù‚Ű·Ű±"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
+"\n"
+"ÙŰ¶Ù„Ű§Ù‹ قم ŰšŰ§Ù„ŰȘŰŁŰŽÙŠŰ± Űčلى Ű§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„ŰȘي ŰȘŰ­ŰȘŰ§ŰŹÙ‡Ű§.\n"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Palau"
-msgstr "ŰšŰ§Ù„Ű§Ùˆ"
+msgid "Initrd"
+msgstr "Initrd"
#: ../../lang.pm:1
#, c-format
-msgid "Paraguay"
-msgstr "Ű§Ù„ŰšŰ§Ű±ŰŹÙˆŰ§ÙŠ"
+msgid "Cape Verde"
+msgstr "ÙƒÙŠŰš ÙÙŠŰ±ŰŻÙŠ"
-#: ../../lang.pm:1
-#, c-format
-msgid "Portugal"
-msgstr "Ű§Ù„ŰšŰ±ŰȘŰșŰ§Ù„"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr "ۧ۰ۧ ÙƒŰ§Ù† Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ Ù„ŰŻÙŠÙ‡ Cyrix 6x86 Coma bug"
-#: ../../lang.pm:1
-#, c-format
-msgid "Palestine"
-msgstr "ÙÙ„ŰłŰ·ÙŠÙ†"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr "مŰčŰ§Ù„ŰŹŰ§ŰȘ pentium Ű§Ù„Ù‚ŰŻÙŠÙ…Ű© ÙƒŰ§Ù†ŰȘ ŰȘŰȘوقف Űčن Ű§Ù„Űčمل ŰčÙ†ŰŻ ۧ۳ŰȘŰźŰŻŰ§Ù… Ű§Ù„ÙƒÙˆŰŻ F00F"
#: ../../lang.pm:1
#, c-format
-msgid "Puerto Rico"
-msgstr "ŰšÙˆŰ±ŰȘÙˆŰ±ÙŠÙƒÙˆ"
+msgid "Guam"
+msgstr "ŰșÙˆŰ§Ù…"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pitcairn"
-msgstr "ŰšÙŠŰȘÙƒŰ§ÙŠŰ±Ù†"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
+msgstr ""
+"ÙŰ¶Ù„Ű§Ù‹ ŰŁŰŻŰźÙ„ Ű§Ù„Ù…Ù†ÙŰ° Ű§Ù„Ù…ŰȘŰ”Ù„Ű© ŰšÙ‡ Ű§Ù„Ű·Ű§ŰšŰčŰ© ŰŁÙˆ ŰŁŰŻŰźÙ„ Ű§ŰłÙ… ŰŹÙ‡Ű§ŰČ/Ű§ŰłÙ… ملف في Ű­Ù‚Ù„ Ű§Ù„Ű„ŰŻŰźŰ§Ù„"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "ŰłŰ§Ù†ŰȘ ŰšÙŠÙŠŰ± و ميكيلون"
+msgid "/Options/Test"
+msgstr "/ŰźÙŠŰ§Ű±Ű§ŰȘ/ۧ۟ŰȘۚۧ۱"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Poland"
-msgstr "ŰšÙˆÙ„Ù†ŰŻŰ§"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+"ÙŠŰŹŰš ۧ۳ŰȘŰźŰŻŰ§Ù… Ù‡Ű°Ű§ Ű§Ù„Ù…ŰłŰȘوى Ű§Ù„ŰŁÙ…Ù†ÙŠ ۭۚ۰۱. فهو ÙŠŰŹŰčل Ù†ŰžŰ§Ù…Ùƒ ŰŁŰłÙ‡Ù„ في Ű§Ù„Ű„ŰłŰȘŰźŰŻŰ§Ù…,\n"
+"لكن يمون Ű­ŰłŰ§ŰłŰ§Ù‹ ŰŹŰŻŰ§Ù‹. Ù„Ű°Ű§ Ù„Ű§ ÙŠŰŹŰš ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡ Ù„Ù…Ű§ÙƒÙŠÙ†Ű© مŰȘŰ”Ù„Ű© ŰšÙ…Ű§ÙƒÙŠÙ†Ű§ŰȘ ŰŁŰźŰ±Ù‰\n"
+"ŰŁÙˆ Ű§Ù„Ù‰ Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ. Ù„Ű§ ÙŠÙˆŰŹŰŻ ŰŻŰźÙˆÙ„ ŰšÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ±."
-#: ../../lang.pm:1
+# y, c-format
+#: ../../fs.pm:1
#, c-format
-msgid "Pakistan"
-msgstr "ŰšŰ§ÙƒŰłŰȘŰ§Ù†"
+msgid "Mounting partition %s"
+msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰ­Ù…ÙŠÙ„ Ű§Ù„ŰȘŰŹŰČŰŠŰ© %s"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Philippines"
-msgstr "Ű§Ù„ÙÙŠÙ„ÙŠŰšÙŠÙ†"
+msgid "User name"
+msgstr "Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Papua New Guinea"
-msgstr "ŰšŰ§ŰšÙˆŰ§ ŰșÙŠÙ†ÙŠŰ§ Ű§Ù„ŰŹŰŻÙŠŰŻŰ©"
+msgid "New configuration (isdn-light)"
+msgstr "Ű„Űčۯۧۯ ŰŹŰŻÙŠŰŻ (isdn-light)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "French Polynesia"
-msgstr "ŰšÙˆÙ„ÙŠÙ†ÙŠŰłÙŠŰ§ Ű§Ù„ÙŰ±Ù†ŰłÙŠŰ©"
+msgid "Userdrake"
+msgstr "Userdrake"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Peru"
-msgstr "ŰšÙŠŰ±Ùˆ"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "ŰŁÙŠ ŰȘŰŹŰČŰŠŰ© ŰȘŰ±ÙŠŰŻ ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡Ű§ من ŰŁŰŹÙ„ Linux4Win"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Panama"
-msgstr "ŰšÙ†Ù…Ű§"
+msgid "Backup system"
+msgstr "Ù†ŰžŰ§Ù… Ű§Ù„Ù…ŰłŰ§ŰčŰŻ"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Oman"
-msgstr "ŰčÙ…Ű§Ù†"
+msgid "Test pages"
+msgstr "Ű”ÙŰ­Ű§ŰȘ ۧ۟ŰȘŰšŰ§Ű±ÙŠŰ©"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "New Zealand"
-msgstr "نيوŰČÙŠÙ„Ù†ŰŻŰ§"
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
+"Ù‚Ű§ŰŠÙ…Ű© Ű§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„ŰȘي ŰłÙŠŰȘم ۧ۳ŰȘ۱ۏۧŰčÙ‡Ű§:\n"
+"\n"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Niue"
-msgstr "نيوي"
+msgid "Checking %s"
+msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰȘŰŁÙƒŰŻ من %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Nauru"
-msgstr "Ù†Ű§ÙˆŰ±Ùˆ"
+msgid "TCP/Socket Printer Options"
+msgstr "ŰźÙŠŰ§Ű±Ű§ŰȘ ۷ۧۚŰčŰ© TCP/Socket"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Nepal"
-msgstr "Ù†ÙŠŰšŰ§Ù„"
+msgid "Card mem (DMA)"
+msgstr "Card mem (DMA)"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Nicaragua"
-msgstr "Ù†ÙŠÙƒŰ§Ű±Ű§ŰșÙˆŰ§"
+msgid "France"
+msgstr "ÙŰ±Ù†ŰłŰ§"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Nigeria"
-msgstr "Ù†ÙŠŰŹÙŠŰ±ÙŠŰ§"
+msgid "browse"
+msgstr "ۧ۳ŰȘŰč۱۶"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Norfolk Island"
-msgstr "ŰŹŰČÙŠŰ±Ű© Ù†ÙˆŰ±ÙÙˆÙ„Ùƒ"
+msgid "Checking installed software..."
+msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰȘŰŁÙƒŰŻ من Ű§Ù„ŰšŰ±Ű§Ù…ŰŹ Ű§Ù„Ù…Ű«ŰšÙ‘ŰȘŰ©..."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Niger"
-msgstr "Ű§Ù„Ù†ÙŠŰŹŰ±"
+msgid "Remote printer name missing!"
+msgstr "Ű§ŰłÙ… Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„ŰšŰčÙŠŰŻŰ© Ù…ÙÙ‚ÙˆŰŻ!"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New Caledonia"
-msgstr "Ù†ÙŠÙˆÙƒŰ§Ù„ÙŠŰŻÙˆÙ†ÙŠŰ§"
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "هل ŰȘŰ±ÙŠŰŻ ŰȘمكين Ű§Ù„Ű·ŰšŰ§ŰčŰ© Űčلى Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ في Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ©ŰŸ\n"
#: ../../lang.pm:1
#, c-format
-msgid "Namibia"
-msgstr "Ù†Ű§Ù…ÙŠŰšÙŠŰ§"
+msgid "Turkey"
+msgstr "ŰȘŰ±ÙƒÙŠŰ§"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Mozambique"
-msgstr "موŰČÙ…ŰšÙŠÙ‚"
+msgid "Alcatel speedtouch usb"
+msgstr "Alcatel speedtouch usb"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Malaysia"
-msgstr "Ù…Ű§Ù„ÙŠŰČÙŠŰ§"
+msgid "Number of buttons"
+msgstr "ŰčŰŻŰŻ Ű§Ù„ŰŁŰČ۱ۧ۱"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Mexico"
-msgstr "Ű§Ù„Ù…ÙƒŰłÙŠÙƒ"
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Ű§ÙÙŠŰȘÙ†Ű§Ù…ÙŠŰ© \"Ű”Ù Ű±Ù‚Ù…ÙŠ\" QWERTY"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Malawi"
-msgstr "Ù…Ű§Ù„Ű§ÙˆÙŠ"
+msgid "Module"
+msgstr "ÙˆŰ­ŰŻŰ©"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Maldives"
-msgstr "ŰŹŰČ۱ Ű§Ù„Ù…Ű§Ù„ŰŻÙŠÙ"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
+msgstr ""
+"ŰšŰ§Ù„Ű„Ű¶Ű§ÙŰ© Ű§Ù„Ù‰ Ű°Ù„Ùƒ, ÙŰ„Ù† Ű§Ù„Ű”ÙÙˆÙ Ű§Ù„ŰȘي لم يŰȘم ŰčÙ…Ù„Ù‡Ű§ ŰšÙ‡Ű°Ű§ Ű§Ù„ŰšŰ±Ù†Ű§Ù…Ű­ ŰŁÙˆ \"foomatic-"
+"configure\" Ù„Ű§ يمكن Ù†Ù‚Ù„Ù‡Ű§."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mauritius"
-msgstr "Ù…ÙˆŰ±ÙŠŰŽÙŠÙˆŰł"
+msgid "Hardware"
+msgstr "Ű§Ù„ŰčŰȘۧۯ"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Malta"
-msgstr "Ù…Ű§Ù„Ű·Ű©"
+msgid "Ctrl and Alt keys simultaneously"
+msgstr "Ù…ÙŰ§ŰȘÙŠŰ­ Ctrl و Alt في Ù†ÙŰł Ű§Ù„ÙˆÙ‚ŰȘ"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Montserrat"
-msgstr "مونŰȘŰłÙŠŰ±Ű§ŰȘ"
+msgid "United States"
+msgstr "Ű§Ù„ÙˆÙ„Ű§ÙŠŰ§ŰȘ Ű§Ù„Ù…ŰȘŰ­ŰŻŰ©"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mauritania"
-msgstr "Ù…ÙˆŰ±ÙŠŰȘŰ§Ù†ÙŠŰ§"
+msgid "Default OS?"
+msgstr "Ù†ŰžŰ§Ù… Ű§Ù„ŰȘŰŽŰșيل Ű§Ù„Ű§ÙŰȘŰ±Ű§Ű¶ÙŠŰŸ"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Martinique"
-msgstr "Ù…Ű§Ű±ŰȘينيك"
+msgid "Swiss (German layout)"
+msgstr "Ű§Ù„ŰłÙˆÙŠŰłŰ±ÙŠŰ© (ŰȘŰ”Ù…ÙŠÙ… ŰŁÙ„Ù…Ű§Ù†ÙŠ)"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Northern Mariana Islands"
-msgstr "ŰŹŰČ۱ Ù…Ű§Ű±ÙŠŰ§Ù†Ű§ Ű§Ù„ŰŽÙ…Ű§Ù„ÙŠŰ©"
+msgid "Configure all heads independently"
+msgstr "ۧŰčۯۧۯ كل Ű§Ù„Ű±Ű€ÙˆŰł ŰšŰŽÙƒÙ„ Ù…ŰłŰȘقل"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mongolia"
-msgstr "منŰșÙˆÙ„ÙŠŰ§"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr ""
+"ÙŰ¶Ù„Ű§Ù‹ ŰŁŰŻŰźÙ„ Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„ŰȘي ŰȘŰ±ÙŠŰŻ ۧŰčŰŻŰ§ŰŻÙ‡Ű§. ۧŰčۯۧۯ Ù‡Ű°Ù‡ Ű§Ù„Ű·Ű§ŰšŰčŰ© ŰłÙŠŰčمل ŰąÙ„ÙŠŰ§Ù‹. Ű§Ù† لم يŰȘم "
+"Ű§ÙƒŰȘŰŽŰ§Ù Ű§Ù„Ű·Ű§ŰšŰčŰ© ŰšŰ§Ù„ŰŽÙƒÙ„ Ű§Ù„Ű”Ű­ÙŠŰ­ ŰŁÙˆ ۧ۰ۧ كنŰȘ ŰȘÙŰ¶Ù„ ŰȘÙ‡ÙŠŰŠŰ© ÙŠŰŻÙˆÙŠŰ© ŰŽŰșل \"ŰȘÙ‡ÙŠŰŠŰ© ÙŠŰŻÙˆÙŠŰ©\"."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Myanmar"
-msgstr "Ù…ÙŠŰ§Ù†Ù…Ű§Ű±"
+msgid "NTP Server"
+msgstr "ŰźŰ§ŰŻÙ… NTP"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Mali"
-msgstr "Ù…Ű§Ù„ÙŠ"
+msgid "Load/Save on floppy"
+msgstr "Ű­Ù…Ù‘Ù„/Ű§Ű­ÙŰž Űčلى Ù‚Ű±Ű” Ù…Ű±Ù†"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Macedonia"
-msgstr "Ù…Ù‚ŰŻÙˆÙ†ÙŠŰ§"
+msgid "This theme does not yet have a bootsplash in %s !"
+msgstr "Ù‡Ű°Ù‡ Ű§Ù„ŰłÙ…Ű© Ù„ÙŠŰł Ù„Ù‡Ű§ bootsplash في %s !"
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Marshall Islands"
-msgstr "ŰŹŰČ۱ Ù…Ű§Ű±ŰŽŰ§Ù„"
+msgid "nice"
+msgstr "ŰžŰ±ÙŠÙ"
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Madagascar"
-msgstr "Ù…ŰŻŰșŰŽÙ‚Ű±"
+msgid "Leaving in %d seconds"
+msgstr "ŰłŰȘŰȘم Ű§Ù„Ù…Űșۧۯ۱۩ في %d Ű«ÙˆŰ§Ù†"
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Moldova"
-msgstr "Ù…ÙˆÙ„ŰŻÙˆÙŰ§"
+msgid "Please choose which serial port your modem is connected to."
+msgstr "ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ Ű§Ù„Ù…Ù†ÙŰ° Ű§Ù„ŰȘŰłÙ„ŰłÙ„ÙŠ Ű§Ù„Ù…Ű±ŰȘۚ۷ ŰšÙ‡ Ű§Ù„Ù…ÙˆŰŻÙ… Ù„ŰŻÙŠÙƒ."
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Monaco"
-msgstr "Ù…ÙˆÙ†Ű§ÙƒÙˆ"
+msgid "Country"
+msgstr "Ű§Ù„ŰšÙ„ŰŻ"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Morocco"
-msgstr "Ű§Ù„Ù…Űș۱ۚ"
+msgid "Property"
+msgstr "Ű§Ù„ŰźŰ§Ű”ÙŠŰ©"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Libya"
-msgstr "Ù„ÙŠŰšÙŠŰ§"
+msgid "Ghostscript"
+msgstr "Ghostscript"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Latvia"
-msgstr "Ù„Ű§ŰȘÙÙŠŰ§"
+msgid "LAN Configuration"
+msgstr "Ű„Űčۯۧۯ LAN"
#: ../../lang.pm:1
#, c-format
-msgid "Luxembourg"
-msgstr "Ù„ÙˆÙƒŰłÙ…ŰšÙˆŰ±Űș"
+msgid "Ghana"
+msgstr "ŰșŰ§Ù†Ű§"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lithuania"
-msgstr "ليŰȘÙˆŰ§Ù†ÙŠŰ§"
+msgid "Path or Module required"
+msgstr "ÙŠÙŰ­ŰȘۧۏ Ű§Ù„Ù‰ Ù…ŰłŰ§Ű± ŰŁÙˆ ÙˆŰ­ŰŻŰ©"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Lesotho"
-msgstr "Ù„ÙŠŰłÙˆŰȘو"
+msgid "Advanced Options"
+msgstr "ŰźÙŠŰ§Ű±Ű§ŰȘ مŰȘÙ‚ŰŻÙ…Ű©"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Liberia"
-msgstr "Ù„ÙŠŰšŰ±ÙŠŰ§"
+msgid "Coma bug"
+msgstr "Coma bug"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Sri Lanka"
-msgstr "ŰłŰ±ÙŠÙ„Ű§Ù†ÙƒŰ§"
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Liechtenstein"
-msgstr "Ù„ÙŠŰŽŰȘÙ†ŰŽŰȘŰ§ÙŠÙ†"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
+"ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű±ŰłÙˆÙ…\n"
+"\n"
+" ŰšŰ±Ù†Ű§Ù…ŰŹ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ يقوم ŰšŰ§ÙƒŰȘŰŽŰ§Ù و ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ù…ÙˆŰŹÙˆŰŻŰ© Űčلى Ù†ŰžŰ§Ù…Ùƒ\n"
+"ŰšŰŽÙƒÙ„ ŰąÙ„ÙŠ. Ű§Ù† لم ÙŠŰ­Ű”Ù„ Ű°Ù„Ùƒ, يمكنك ۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„ŰšŰ·Ű§Ù‚Ű© Ű§Ù„ŰȘي Ù„ŰŻÙŠÙƒ ŰšŰ§Ù„ÙŰčل\n"
+"من Ű§Ù„Ù‚Ű§ŰŠÙ…Ű©.\n"
+"\n"
+" في Ű­Ű§Ù„ ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ù‡Ù†Ű§Ùƒ ŰźŰ§ŰŻÙ…Ű§ŰȘ Ű±ŰłÙˆÙ…ÙŠŰ© Ù…ŰźŰȘÙ„ÙŰ© Ù„ŰšŰ·Ű§Ù‚ŰȘك, مŰč ŰŁÙˆ ŰšŰŻÙˆÙ†\n"
+"ŰȘŰłŰ±ÙŠŰč Ù„Ù„Ű±ŰłÙˆÙ… Ű«Ù„Ű§Ű«ÙŠŰ© Ű§Ù„ŰŁŰšŰčۧۯ, يمكنك في Ù‡Ű°Ù‡ Ű§Ù„Ű­Ű§Ù„ ۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„ŰźŰ§ŰŻÙ… Ű§Ù„Ű°ÙŠ\n"
+"ÙŠÙ†Ű§ŰłŰš ۭۧŰȘÙŠŰ§ŰŹŰ§ŰȘك ŰŁÙƒŰ«Ű±."
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Saint Lucia"
-msgstr "ŰłŰ§Ù†ŰȘ Ù„ÙˆŰłÙŠŰ§"
+msgid "There was an error installing packages:"
+msgstr "ÙƒŰ§Ù† Ù‡Ù†Ű§Ùƒ ۟۷ۣ في ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ű­ŰČم:"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lebanon"
-msgstr "Ù„ŰšÙ†Ű§Ù†"
+msgid "Lexmark inkjet configuration"
+msgstr "Ű„Űčۯۧۯ Lexmark Inkjet"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Laos"
-msgstr "Ù„Ű§ÙˆŰł"
+msgid "Undo"
+msgstr "ŰȘ۱ۧۏŰč"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Kazakhstan"
-msgstr "ÙƒŰ§ŰČۧ۟۳ŰȘŰ§Ù†"
+msgid "Save partition table"
+msgstr "Ű­ÙŰž ŰŹŰŻÙˆÙ„ Ű§Ù„ŰȘÙ‚ŰłÙŠÙ…"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Cayman Islands"
-msgstr "ŰŹŰČ۱ ÙƒŰ§ÙŠÙ…Ű§Ù†"
+msgid "Finnish"
+msgstr "Ű§Ù„ÙÙ†Ù„Ù†ŰŻÙŠŰ©"
#: ../../lang.pm:1
#, c-format
-msgid "Kuwait"
-msgstr "Ű§Ù„ÙƒÙˆÙŠŰȘ"
+msgid "Macedonia"
+msgstr "Ù…Ù‚ŰŻÙˆÙ†ÙŠŰ§"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Korea"
-msgstr "ÙƒÙˆŰ±ÙŠŰ§"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
+"Ű§Ù„Ù…ŰŽŰ§Ű±ÙƒŰ© لكل Ù…ŰłŰȘŰźŰŻÙ… ŰȘŰłŰȘŰźŰŻÙ… Ű§Ù„Ù…ŰŹÙ…ÙˆŰčŰ© \"fileshare\".\n"
+"يمكنك ŰŁÙ† ŰȘŰłŰȘŰźŰŻÙ… userdrake Ù„Ű„Ű¶Ű§ÙŰ© Ù…ŰłŰȘŰźŰŻÙ… في Ù‡Ű°Ù‡ Ű§Ù„Ù…ŰŹÙ…ÙˆŰčŰ©."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Korea (North)"
-msgstr "ÙƒÙˆŰ±ÙŠŰ§ Ű§Ù„ŰŽÙ…Ű§Ù„ÙŠŰ©"
+msgid "Slovenian"
+msgstr "Ű§Ù„ŰłÙ„ÙˆÙÙŠÙ†ÙŠŰ©"
#: ../../lang.pm:1
#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "ŰłŰ§Ù†ŰȘ كيŰȘŰł و Ù†ÙŠÙÙŠŰł"
+msgid "Libya"
+msgstr "Ù„ÙŠŰšÙŠŰ§"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Comoros"
-msgstr "ŰŹŰČ۱ Ű§Ù„Ù‚Ù…Ű±"
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr "ŰŹŰ§Ű±ÙŠ Ű„Űčۯۧۯ Ű§Ù„Ù†Ű”ÙˆŰ” Ű§Ù„ŰšŰ±Ù…ŰŹÙŠŰ© و ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„ŰšŰ±Ù…ŰŹÙŠŰ§ŰȘ و ۚۯۥ Ű§Ù„ŰźŰŻÙ…Ű§ŰȘ..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Kiribati"
-msgstr "ÙƒÙŠŰ±ÙŠŰšŰ§ŰȘي"
+msgid ""
+"\n"
+"- Burn to CD"
+msgstr ""
+"\n"
+"- Ű§Ù†ŰłŰź Ű§Ù„Ù‰ Ù‚Ű±Ű” Ù…ŰŻÙ…ŰŹ"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Cambodia"
-msgstr "ÙƒÙ…ŰšÙˆŰŻÙŠŰ§"
+msgid "Table"
+msgstr "Ű§Ù„ŰŹŰŻÙˆÙ„"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Kyrgyzstan"
-msgstr "Ù‚ÙŠŰ±ŰșيŰČŰłŰȘŰ§Ù†"
+msgid "I don't know how to format %s in type %s"
+msgstr "Ù„Ű§ ŰŁŰčŰ±Ù كيف ŰŁŰŹÙ‡ŰČ %s في Ű§Ù„Ù†ÙˆŰč %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Kenya"
-msgstr "ÙƒÙŠÙ†ÙŠŰ§"
+msgid "Model"
+msgstr "Ű§Ù„Ű·Ű±Ű§ŰČ"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Japan"
-msgstr "Ű§Ù„ÙŠŰ§ŰšŰ§Ù†"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Jordan"
-msgstr "Ű§Ù„ŰŁŰ±ŰŻÙ†"
+msgid "Stop Server"
+msgstr "ŰŁÙˆÙ‚Ù Ű§Ù„ŰźŰ§ŰŻÙ…"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Jamaica"
-msgstr "ŰŹŰ§Ù…Ű§ÙŠÙƒŰ§"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
+msgstr ""
+"\n"
+"ۧ۟ŰȘ۱ ŰłÙ…Ű©\n"
+"Lilo و bootsplash,\n"
+"يمكنك ۧ۟ŰȘÙŠŰ§Ű±Ù‡Ù…\n"
+"ŰšŰŽÙƒÙ„ Ù…Ù†ÙŰ”Ù„"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Iceland"
-msgstr "ŰąÙŠŰłÙ„Ù†ŰŻŰ§"
+msgid "Modem"
+msgstr "Ű§Ù„Ù…ÙˆŰŻÙ…"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Iran"
-msgstr "Ű§ÙŠŰ±Ű§Ù†"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
+msgstr ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
#: ../../lang.pm:1
#, c-format
-msgid "Iraq"
-msgstr "Ű§Ù„ŰčŰ±Ű§Ù‚"
+msgid "Tuvalu"
+msgstr "ŰȘÙˆÙŰ§Ù„Ùˆ"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "Ù…Ù†Ű·Ù‚Ű© ŰŹŰČ۱ Ű§Ù„Ù…Ű­ÙŠŰ· Ű§Ù„Ù‡Ű§ŰŻÙŠ Ű§Ù„ŰšŰ±ÙŠŰ·Ű§Ù†ÙŠŰ©"
+msgid "Use auto detection"
+msgstr "ۧ۳ŰȘŰźŰŻÙ… Ű§Ù„ŰȘŰ­Ù‚Ù‚ Ű§Ù„ŰąÙ„ÙŠ"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "India"
-msgstr "Ű§Ù„Ù‡Ù†ŰŻ"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr ""
+"يقوم GPM ŰšŰ„Ű¶Ű§ÙŰ© ŰŻŰčم Ű§Ù„ÙŰŁŰ±Ű© لŰȘŰ·ŰšÙŠÙ‚Ű§ŰȘ Ù„ÙŠÙ†ÙƒŰł في Ű§Ù„ÙˆŰ¶Űč Ű§Ù„Ù†Ű”ÙŠ Ù…Ű«Ù„\n"
+"Midnight Commander. Ű§Ű¶Ű§ÙŰ© Ű§Ù„Ù‰ Ű°Ù„Ùƒ ÙŰ„Ù†Ù‡ ÙŠŰłÙ…Ű­ ŰšŰčÙ…Ù„ÙŠŰ§ŰȘ Ű§Ù„Ù‚Ű” و Ű§Ù„Ù„Ű”Ù‚ في ۳۷۱ "
+"Ű§Ù„ŰŁÙˆŰ§Ù…Ű±,\n"
+"ÙƒÙ…Ű§ يŰȘŰ¶Ù…Ù† ŰŻŰčم Ű§Ù„Ù‚ÙˆŰ§ŰŠÙ… Ű§Ù„Ù…ŰźŰȘ۔۱۩ في ۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű±."
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Israel"
-msgstr "Ű§ŰłŰ±Ű§ŰŠÙŠÙ„"
+msgid "Started on boot"
+msgstr "يŰȘم ŰšŰŻŰĄÙ‡ ŰčÙ†ŰŻ Ű§Ù„Ű„Ù‚Ù„Ű§Űč"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Ireland"
-msgstr "ŰŁÙŠŰ±Ù„Ù†ŰŻŰ§"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
+msgstr ""
+"Ű§Ù„ŰȘŰ­Ù‚ ŰšÙŰ±ÙŠÙ‚ Ű§Ù„ŰŻŰčم Ű§Ù„ÙÙ†ÙŠ في MandrakeSoft و Ù…ŰŹŰȘمŰč Ù„ÙŠÙ†ÙƒŰł Űčلى Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ Ù„Ù…ŰŽŰ§Ű±ÙƒŰ© "
+"مŰčÙ„ÙˆÙ…Ű§ŰȘك و Ù…ŰłŰ§ŰčŰŻŰ© Ű§Ù„ŰąŰźŰ±ÙŠÙ† ŰšŰŁÙ† ŰȘ۔ۭۚ ŰźŰšÙŠŰ±Ű§Ù‹ مŰčŰȘÙ…ÙŽŰŻŰ§Ù‹ في موقŰčÙ†Ű§ Ù„Ù„ŰŻŰčم Ű§Ù„ÙÙ†ÙŠ Űčلى "
+"Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ:"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Indonesia"
-msgstr "Ű§Ù†ŰŻÙˆÙ†ÙŠŰłÙŠŰ§"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
+msgstr ""
+"يمكن ŰȘŰčيين Ű§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„ŰȘŰ§Ù„ÙŠŰ© لŰȘŰźŰ”ÙŠŰ”\n"
+"ŰŁÙ…Ù† Ű§Ù„Ù†ŰžŰ§Ù…. ۧ۰ۧ كنŰȘ ŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ مŰČÙŠŰŻ من Ű§Ù„ŰŽŰ±Ű­, Ű§Ù„Ù‚ Ù†ŰžŰ±Ű© Űčلى Ű§Ù„Ù…ŰłŰ§ŰčŰŻŰ©.\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hungary"
-msgstr "Ű§Ù„Ù…ŰŹŰ±"
+msgid "Automatically find available printers on remote machines"
+msgstr "ۧŰč۫۱ Űčلى Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…ÙˆŰŹÙˆŰŻŰ© Űčلى Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű§ŰȘ Ű§Ù„ŰšŰčÙŠŰŻŰ© ŰąÙ„ÙŠŰ§Ù‹"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Haiti"
-msgstr "Ù‡Ű§ÙŠŰȘي"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
+"\n"
+"- Ű§Ű­ÙŰž Ű§Ù„Ù‰ Ű§Ù„ŰŽŰ±ÙŠŰ· Űčلى Ű§Ù„ŰŹÙ‡Ű§ŰČ: %s"
#: ../../lang.pm:1
#, c-format
-msgid "Croatia"
-msgstr "ÙƒŰ±ÙˆŰ§ŰȘÙŠŰ§"
+msgid "East Timor"
+msgstr "ŰȘÙŠÙ…ÙˆŰ± Ű§Ù„ŰŽŰ±Ù‚ÙŠŰ©"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Honduras"
-msgstr "Ù‡Ù†ŰŻÙˆŰ±Ű§Űł"
+msgid "Del profile..."
+msgstr "Ű§Ű­Ű°Ù Ű§Ù„ŰȘŰŽÙƒÙŠÙ„..."
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "ŰŹŰČ۱ Ù‡ÙŠŰ±ŰŻ و Ù…Ű§ÙƒŰŻÙˆÙ†Ű§Ù„ŰŻ"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hong Kong"
-msgstr "Ù‡ÙˆÙ†ŰŹ ÙƒÙˆÙ†ŰŹ"
+msgid "Installing Foomatic..."
+msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰ«ŰšÙŠŰȘ Foomatic..."
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "China"
-msgstr "Ű§Ù„Ű”ÙŠÙ†"
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "ÙŠŰ±ŰŹÙ‰ ŰȘŰłŰŹÙŠÙ„ Ű§Ù„ŰźŰ±ÙˆŰŹ Ű«Ù… ۧ۳ŰȘŰźŰŻÙ… Ctrl-Alt-BackSpace"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Guyana"
-msgstr "ŰșÙˆÙŠŰ§Ù†Ű§"
+msgid "detected"
+msgstr "ŰȘم Ű§ÙƒŰȘŰŽŰ§ÙÙ‡"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Guinea-Bissau"
-msgstr "ŰșÙŠÙ†ÙŠŰ§-ŰšÙŠŰłŰ§Ùˆ"
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr "ÙŠŰŹŰš ۧŰčۧۯ۩ ŰȘŰŽŰșيل Ű§Ù„ŰŽŰšÙƒŰ©. هل ŰȘŰ±ÙŠŰŻ ۧŰčۧۯ۩ ŰȘŰŽŰșÙŠÙ„Ù‡Ű§ ۟"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Guam"
-msgstr "ŰșÙˆŰ§Ù…"
+msgid "Package: "
+msgstr "Ű§Ù„ŰŹŰČÙ…Ű©: "
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Guatemala"
-msgstr "ŰșÙˆŰ§ŰȘÙŠÙ…Ű§Ù„Ű§"
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr "ŰȘŰč۰۱ŰȘ كŰȘۧۚ۩ /etc/sysconfig/bootsplash."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "ŰŹÙˆŰŹÙŠŰ§ Ű§Ù„ŰŹÙ†ÙˆŰšÙŠŰ© و ŰŹŰČ۱ ŰłŰ§Ù†ŰŻÙˆÙŠŰȘŰŽ Ű§Ù„ŰŹÙ†ÙˆŰšÙŠŰ©"
+msgid "SECURITY WARNING!"
+msgstr "ŰȘŰ­Ű°ÙŠŰ± ŰŁÙ…Ù†ÙŠ!"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Equatorial Guinea"
-msgstr "ŰșÙŠÙ†ÙŠŰ§ Ű§Ù„Ű„ŰłŰȘÙˆŰ§ŰŠÙŠŰ©"
+msgid "StarOffice"
+msgstr "StarOffice"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Guadeloupe"
-msgstr "ŰșÙˆŰ§ŰŻÙŠÙ„ÙˆŰš"
+msgid "No, I don't want autologin"
+msgstr "Ù„Ű§, Ù„Ű§ ŰŁŰ±ÙŠŰŻ ŰŻŰźÙˆÙ„Ű§ ŰŁÙ„ÙŠŰ§"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Guinea"
-msgstr "ŰșÙŠÙ†ÙŠŰ§"
+msgid "Windows Migration tool"
+msgstr "ۣۯۧ۩ Ű§Ù„Ű„Ù†ŰȘÙ‚Ű§Ù„ من Windows"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Gambia"
-msgstr "ŰșŰ§Ù…ŰšÙŠŰ§"
+msgid "All languages"
+msgstr "كل Ű§Ù„Ù„ŰșۧŰȘ"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Greenland"
-msgstr "ŰșŰ±ÙŠÙ†Ù„Ű§Ù†ŰŻ"
+msgid "Removing %s"
+msgstr "ŰŹŰ§Ű±ÙŠ ۧŰČŰ§Ù„Ű© %s"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Gibraltar"
-msgstr "ŰŹŰšÙ„ Ű·Ű§Ű±Ù‚"
+msgid "Testing your connection..."
+msgstr "ŰŹŰ§Ű±ÙŠ ۧ۟ŰȘۚۧ۱ Ű§Ù„ÙˆŰ”Ù„Ű©..."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Ghana"
-msgstr "ŰșŰ§Ù†Ű§"
+msgid "Cache size"
+msgstr "Ű­ŰŹÙ… Ű§Ù„Ű°Ű§ÙƒŰ±Ű© Ű§Ù„Ù…ŰźŰšŰŠÙŠŰ©"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "French Guiana"
-msgstr "ŰșÙˆÙŠŰ§Ù†Ű§ Ű§Ù„ÙŰ±Ù†ŰłÙŠŰ©"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
+msgstr "ÙƒÙ„Ù…Ű§ŰȘ Ű§Ù„Ù…Ű±ÙˆŰ± Ù…Ù…ÙƒÙ‘Ù†Ű© Ű§Ù„ŰąÙ†, لكن Ű§Ù„Ű§ŰłŰȘŰźŰŻŰ§Ù… ÙƒŰ­Ű§ŰłŰš في ŰŽŰšÙƒŰ© يŰČŰ§Ù„ ŰșÙŠŰ± Ù…ÙŰ¶Ù‘Ù„."
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Georgia"
-msgstr "ŰŹÙˆŰ±ŰŹÙŠŰ§"
+msgid "Start sector: "
+msgstr "Ù‚Ű·Ű§Űč Ű§Ù„ŰšŰŻŰ§ÙŠŰ©: "
#: ../../lang.pm:1
#, c-format
-msgid "Grenada"
-msgstr "ŰčŰ±ÙŠÙ†Ű§ŰŻŰ§"
+msgid "Congo (Brazzaville)"
+msgstr "Ű§Ù„ÙƒÙˆÙ†Űșو ۚ۱ۧŰČŰ§ÙÙŠÙ„"
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "United Kingdom"
-msgstr "Ű§Ù„Ù…Ù…Ù„ÙƒŰ© Ű§Ù„Ù…ŰȘŰ­ŰŻŰ©"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr "Ű§Ù„Ű­ŰČÙ…Ű© %s ÙŠŰŹŰš ŰŁÙ† ŰȘÙŰ«ŰšÙ‘ŰȘ. هل ŰȘŰ±ÙŠŰŻ ŰȘŰ«ŰšÙŠŰȘÙ‡Ű§ŰŸ"
#: ../../lang.pm:1
#, c-format
-msgid "Gabon"
-msgstr "Ű§Ù„ŰșŰ§ŰšÙˆÙ†"
+msgid "Seychelles"
+msgstr "ŰŹŰČ۱ ŰłÙŠŰŽÙ„"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Faroe Islands"
-msgstr "ŰŹŰČ۱ Ű§Ù„ÙÙŠŰ±Ùˆ"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
+msgstr ""
+"Ù‚Ű§Ù… Printerdrake ŰšÙ…Ù‚Ű§Ű±Ù†Ű© Ű§ŰłÙ… Ű§Ù„Ű·Ű±Ű§ŰČ Ű§Ù„Ù†Ű§ŰȘŰŹ Űčن Ű§Ù„ŰȘŰ­Ù‚Ù‚ Ű§Ù„ŰąÙ„ÙŠ من Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ مŰč "
+"Ű§Ù„Ű·Ű±Ű§ŰČۧŰȘ Ű§Ù„Ù…ÙˆŰŹÙˆŰŻŰ© في Ù‚Ű§ŰčŰŻŰ© ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ù„Ù„Ű­Ű”ÙˆÙ„ Űčلى ŰŁÙŰ¶Ù„ ŰȘÙˆŰ§ÙÙ‚. Ù‡Ű°Ű§ "
+"Ű§Ù„Ű„ŰźŰȘÙŠŰ§Ű± Ù‚ŰŻ يكون ŰźŰ§Ű·ŰŠŰ§Ù‹, ŰźŰ”ÙˆŰ”Ű§Ù‹ ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ű§Ù„Ű·Ű§ŰšŰčŰ© ŰșÙŠŰ± Ù…ÙˆŰŹÙˆŰŻŰ© Ű§Ű·Ù„Ű§Ù‚Ű§Ù‹ في Ù‚Ű§ŰčŰŻŰ© "
+"ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ. Ù„Ű°Ű§ ŰȘŰŁÙƒŰŻ ۧ۰ ÙƒŰ§Ù† ۧ۟ŰȘÙŠŰ§Ű±Ùƒ Ű”Ű­ÙŠŰ­Ű§Ù‹ و Ű§Ù†Ù‚Ű± \"Ű§Ù„Ű·Ű±Ű§ŰČ Ű”Ű­ÙŠŰ­\", ŰŁÙ…Ű§ "
+"Ű§Ù† لم يكن Ű§Ù„Ű·Ű§ŰČ Ű”Ű­ÙŠŰ­Ű§Ù‹, Ű§Ù†Ù‚Ű± \"ۧ۟ŰȘ۱ Ű§Ù„Ű·Ű±Ű§ŰČ ÙŠŰŻÙˆÙŠŰ§Ù‹\" كي يŰȘŰłÙ†Ù‰ لك ۧ۟ŰȘÙŠŰ§Ű± ۷۱ۧŰČ "
+"۷ۧۚŰčŰȘك ÙŠŰŻÙˆÙŠŰ§Ù‹ Űčلى Ű§Ù„ŰŽŰ§ŰŽŰ© Ű§Ù„ŰȘŰ§Ù„ÙŠŰ©.\n"
+"\n"
+"Ù„Ű·Ű§ŰšŰčŰȘك ÙˆŰŹŰŻ Printerdrake:\n"
+"\n"
+"%s"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Micronesia"
-msgstr "Ù…ÙŠÙƒŰ±ÙˆÙ†ÙŠŰČÙŠŰ§"
+msgid "Bad password on %s"
+msgstr "ÙƒÙ„Ù…Ű© Ù…Ű±ÙˆŰ± ŰłÙŠŰŠŰ© Űčلى %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "ŰŹŰČ۱ ÙÙˆÙƒÙ„Ű§Ù†ŰŻ"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
+msgstr ""
+"\n"
+"ŰȘÙˆŰŹŰŻ ۷ۧۚŰčŰ© ŰșÙŠŰ± مŰčŰ±ÙˆÙŰ© مŰȘŰ”Ù„Ű© Ù…ŰšŰ§ŰŽŰ±Ű©Ù‹ ŰšÙ†ŰžŰ§Ù…Ùƒ"
#: ../../lang.pm:1
#, c-format
-msgid "Fiji"
-msgstr "ÙÙŠŰŹÙŠ"
+msgid "Zambia"
+msgstr "ŰČŰ§Ù…ŰšÙŠŰ§"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Finland"
-msgstr "ÙÙ†Ù„Ù†ŰŻŰ§"
+msgid "Security Administrator (login or email)"
+msgstr "Ù…ŰŻÙŠŰ± Ű§Ù„Ù†ŰžŰ§Ù… (Ű§ŰłÙ… Ű§Ù„ŰŻŰźÙˆÙ„ ŰŁÙˆ Ű§Ù„ŰšŰ±ŰŻÙŠ Ű§Ù„ŰŁÙ„ÙƒŰȘŰ±ÙˆÙ†ÙŠ)"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Ethiopia"
-msgstr "Ű§Ű«ÙŠÙˆŰšÙŠŰ§"
+msgid "Sorry, we support only 2.4 kernels."
+msgstr "ŰąŰłÙÙˆÙ†, Ù†Ű­Ù† Ù†ŰŻŰčم ۧ۔ۯۧ۱ۧŰȘ Ű§Ù„Ù†ÙˆŰ§Ű© 2.4"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Spain"
-msgstr "ŰŁŰłŰšŰ§Ù†ÙŠŰ§"
+msgid "Romanian (qwerty)"
+msgstr "Ű§Ù„Ű±ÙˆÙ…Ű§Ù†ÙŠŰ© (qwertz)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Eritrea"
-msgstr "Ű§Ű±ÙŠŰȘŰ±ÙŠŰ§"
+msgid "Under Devel ... please wait."
+msgstr "ŰȘŰ­ŰȘ Ű§Ù„ŰȘŰ·ÙˆÙŠŰ± ... Ű§Ù†ŰȘ۞۱ ÙŰ¶Ù„Ű§"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Western Sahara"
-msgstr "Ű§Ù„Ű”Ű­Ű±Ű§ŰĄ Ű§Ù„ŰșŰ±ŰšÙŠŰ©"
+msgid "Czech Republic"
+msgstr "ŰŹÙ…Ù‡ÙˆŰ±ÙŠŰ© Ű§Ù„ŰȘŰŽÙŠÙƒ"
#: ../../lang.pm:1
#, c-format
msgid "Egypt"
msgstr "Ù…Ű”Ű±"
-#: ../../lang.pm:1
-#, c-format
-msgid "Estonia"
-msgstr "ۧ۳ŰȘÙˆÙ†ÙŠŰ§"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Ecuador"
-msgstr "Ű§Ù„Ű„ÙƒÙˆŰ§ŰŻÙˆŰ±"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Algeria"
-msgstr "Ű§Ù„ŰŹŰČۧۊ۱"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Dominican Republic"
-msgstr "ŰŹÙ…Ù‡ÙˆŰ±ÙŠŰ© Ű§Ù„ŰŻÙˆÙ…ÙŠÙ†ÙŠÙƒŰ§Ù†"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Dominica"
-msgstr "ŰŻÙˆÙ…ÙŠÙ†ÙŠÙƒŰ§"
-
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Denmark"
-msgstr "Ű§Ù„ŰŻÙ†Ù…Ű§Ű±Ùƒ"
+msgid "Old configuration (isdn4net)"
+msgstr "Ű„Űčۯۧۯ Ù‚ŰŻÙŠÙ… (isdn4net)"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Djibouti"
-msgstr "ŰŹÙŠŰšÙˆŰȘي"
+msgid "Sound card"
+msgstr "ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű”ÙˆŰȘ"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Cyprus"
-msgstr "Ù‚ŰšŰ±Ű”"
+msgid "Import Fonts"
+msgstr "ۧ۳ŰȘÙŠŰ±Ű§ŰŻ Ű§Ù„ŰźŰ·ÙˆŰ·"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Christmas Island"
-msgstr "ŰŹŰČ۱ Ű§Ù„ÙƒŰ±ÙŠŰłÙ…Ű§Űł"
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+"Ù„ŰŻÙŠÙƒ ŰȘŰŹŰČŰŠŰ© Microsofr Windows ÙƒŰšÙŠŰ±Ű©.\n"
+"Ű§Ù‚ŰȘ۱ۭ ŰŁÙ† ŰȘŰșÙŠŰ± Ű­ŰŹÙ… Ù‡Ű°Ù‡ Ű§Ù„ŰȘŰŹŰČŰŠŰ©\n"
+"(ۧ۶ŰșŰ· ŰčÙ„ÙŠÙ‡Ű§ Ű«Ù… ۧ۟ŰȘ۱ \"ŰȘŰșÙŠÙŠŰ± Ű§Ù„Ű­ŰŹÙ…\")"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Cape Verde"
-msgstr "ÙƒÙŠŰš ÙÙŠŰ±ŰŻÙŠ"
+msgid "Suppress Temporary Files"
+msgstr "ŰŁŰšŰ·Ù„ Ű§Ù„Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ù…Ű€Ù‚ŰȘŰ©"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cuba"
-msgstr "ÙƒÙˆŰšŰ§"
+msgid "Change partition type"
+msgstr "ŰșÙŠŰ± نوŰč Ű§Ù„ŰȘŰŹŰČŰŠŰ©"
-#: ../../lang.pm:1
-#, c-format
-msgid "Colombia"
-msgstr "ÙƒÙˆÙ„ÙˆÙ…ŰšÙŠŰ§"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
+"ŰŻÙ‚Ű© Ű§Ù„Űč۱۶\n"
+"\n"
+" يمكنك ۧ۟ŰȘÙŠŰ§Ű± ŰŻÙ‚Ű© Ű§Ù„Űč۱۶ و Űčمق Ű§Ù„ŰŁÙ„ÙˆŰ§Ù† في Ű§Ù„Ű­ŰŻÙˆŰŻ\n"
+"Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű© للŰčŰȘۧۯ. ۧ۟ŰȘ۱ ŰȘلك Ű§Ù„ŰȘي ŰȘÙ†Ű§ŰłŰš ۭۧŰȘÙŠŰ§ŰŹŰ§ŰȘك (Ù„Ű§ ŰȘŰČŰ§Ù„\n"
+"ŰȘŰłŰȘŰ·ÙŠŰč ŰȘŰșÙŠÙŠŰ± ŰȘلك Ű§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ ŰšŰčŰŻ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ). يŰȘم Űč۱۶ ŰčÙŠÙ†Ű©\n"
+"من Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Ù…ŰźŰȘۧ۱۩ Űčلى Ű§Ù„ŰŽŰ§ŰŽŰ©."
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Cameroon"
-msgstr "Ű§Ù„ÙƒŰ§Ù…ÙŠŰ±ÙˆÙ†"
+msgid "Network Options"
+msgstr "ŰźÙŠŰ§Ű±Ű§ŰȘ ŰŽŰšÙƒŰ©"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Chile"
-msgstr "ŰȘŰŽÙŠÙ„ÙŠ"
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
+"ۧŰč۱۶ Ű§Ù„ŰłÙ…Ű§ŰȘ\n"
+"في ۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű±"
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Cook Islands"
-msgstr "ŰŹŰČ۱ Ű§Ù„ÙƒÙˆÙƒ"
+msgid "Statistics"
+msgstr "Ű§Ű­Ű”Ű§ŰŠÙŠŰ§ŰȘ"
-#: ../../lang.pm:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Cote d'Ivoire"
-msgstr "كوŰȘ ŰŻÙŠÙÙˆŰ§Ű±"
+msgid "(on %s)"
+msgstr "(Űčلى %s)"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Switzerland"
-msgstr "Ű§Ù„ŰłÙˆÙŠŰłŰ±ÙŠŰ©"
+msgid "MM Series"
+msgstr "MM Series"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Congo (Brazzaville)"
-msgstr "Ű§Ù„ÙƒÙˆÙ†Űșو ۚ۱ۧŰČŰ§ÙÙŠÙ„"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr "مكŰȘۚ۩ ŰȘŰ­Ù…ÙŠ من Ù‡ŰŹÙ…Ű§ŰȘ buffer overflow و format string"
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Central African Republic"
-msgstr "ŰŹÙ…Ù‡ÙˆŰ±ÙŠŰ© ÙˆŰłŰ· ŰŁÙŰ±ÙŠÙ‚ÙŠŰ©"
+msgid "average"
+msgstr "مŰȘÙˆŰłŰ·"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congo (Kinshasa)"
-msgstr "Ű§Ù„ÙƒÙˆÙ†Űșو ÙƒÙŠÙ†ŰŽŰ§ŰłŰ§"
+msgid "New printer name"
+msgstr "Ű§ŰłÙ… Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„ŰŹŰŻÙŠŰŻŰ©"
#: ../../lang.pm:1
#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "ŰŹŰČ۱ Ű§Ù„ÙƒÙˆÙƒÙˆŰł"
+msgid "Equatorial Guinea"
+msgstr "ŰșÙŠÙ†ÙŠŰ§ Ű§Ù„Ű„ŰłŰȘÙˆŰ§ŰŠÙŠŰ©"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Canada"
-msgstr "ÙƒÙ†ŰŻŰ§"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belize"
-msgstr "ŰšÙŠÙ„ÙŠŰČ"
+msgid "Build Backup"
+msgstr "Ű§ŰšÙ†ÙŠ Ű§Ù„Ù†ŰłŰźŰ© Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠŰ©"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Belarus"
-msgstr "Ű±ÙˆŰłÙŠŰ§ Ű§Ù„ŰšÙŠŰ¶Ű§ŰĄ"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr "Ù„Ű·ŰšŰ§ŰčŰ© ملف من ۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű± ۧ۳ŰȘŰźŰŻÙ… Ű§Ù„ŰŁÙ…Ű± \"%s <file> ŰŁÙˆ \"%s <file>\".\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Botswana"
-msgstr "ŰšÙˆŰȘŰłÙˆŰ§Ù†Ű§"
+msgid "Currently, no alternative possibility is available"
+msgstr "Ű­Ű§Ù„ÙŠŰ§Ù‹ Ù„Ű§ ÙŠÙˆŰŹŰŻ ۭۧŰȘÙ…Ű§Ù„ ŰšŰŻÙŠÙ„"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Bouvet Island"
-msgstr "ŰŹŰČÙŠŰ±Ű© ŰšÙˆÙÙŠÙ‡"
+msgid "Romanian (qwertz)"
+msgstr "Ű§Ù„Ű±ÙˆÙ…Ű§Ù†ÙŠŰ© (qwertz)"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Bhutan"
-msgstr "ŰšÙˆŰȘŰ§Ù†"
+msgid "Write Config"
+msgstr "Ű§ÙƒŰȘŰš Ű§Ù„Ű„ŰčۯۧۯۧŰȘ"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Bahamas"
-msgstr "ŰŹŰČ۱ Ű§Ù„ŰšŰ§Ù‡Ű§Ù…Ű§"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+"Ù…Ű±Ű§Ù‚Űš routed ÙŠŰłÙ…Ű­ ŰšŰȘŰ­ŰŻÙŠŰ« ŰŹŰŻÙˆÙ„ Ù…ÙˆŰŹÙ‡ IP Ű§Ù„ŰąÙ„ÙŠ (IP router table) Űčن Ű·Ű±ÙŠÙ‚\n"
+"ŰšŰ±ÙˆŰȘوكول RIP. ŰšÙŠÙ†Ù…Ű§ ÙŠŰłŰȘŰźŰŻÙ… RIP Űčلى Ű§Ù„ŰŽŰšÙƒŰ§ŰȘ Ű§Ù„Ű”ŰșÙŠŰ±Ű©, ŰȘŰ­ŰȘۧۏ Ű§Ù„ŰŽŰšÙƒŰ§ŰȘ Ű§Ù„ŰŁÙƒŰšŰ±\n"
+"Ű§Ù„Ù‰ ŰšŰ±ÙˆŰȘÙˆÙƒÙˆÙ„Ű§ŰȘ ŰȘÙˆŰŹÙŠÙ‡ مŰčÙ‚ŰŻŰ© ŰŁÙƒŰ«Ű±."
#: ../../lang.pm:1
#, c-format
-msgid "Brazil"
-msgstr "Ű§Ù„ŰšŰ±Ű§ŰČيل"
+msgid "Kiribati"
+msgstr "ÙƒÙŠŰ±ÙŠŰšŰ§ŰȘي"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Bolivia"
-msgstr "ŰšÙˆÙ„ÙŠÙÙŠŰ§"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Brunei Darussalam"
-msgstr "ŰłÙ„Ű·Ù†Ű© ŰšŰ±ÙˆÙ†Ű§ÙŠ"
+msgid "Browse"
+msgstr "ۧ۳ŰȘŰč۱۶"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Bermuda"
-msgstr "ŰšŰ±Ù…ÙˆŰŻŰ§"
+msgid "CDROM"
+msgstr "Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹ"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Benin"
-msgstr "ŰšÙ†ÙŠÙ†"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "هل ŰȘŰ±ÙŠŰŻ ŰŁÙ† ŰȘŰ­Ű§ÙˆÙ„ ŰŁÙ† ŰȘŰȘŰ”Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ Ű§Ù„ŰąÙ†ŰŸ"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Burundi"
-msgstr "ŰšÙˆŰ±ÙˆÙ†ŰŻÙŠ"
+msgid "Belgian"
+msgstr "Ű§Ù„ŰšÙ„ŰŹÙŠÙƒÙŠŰ©"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bahrain"
-msgstr "Ű§Ù„ŰšŰ­Ű±ÙŠÙ†"
+msgid "Do you have an ISA sound card?"
+msgstr "هل Ù„ŰŻÙŠÙƒ ŰšŰ·Ű§Ù‚Ű© Ű”ÙˆŰȘ ISA۟"
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Bulgaria"
-msgstr "ŰšÙ„ŰșŰ§Ű±ÙŠŰ§"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
+msgstr ""
+"لم يŰȘم Ű§ÙƒŰȘŰŽŰ§Ù ŰŁÙŠ Ù…ÙˆŰ§ŰŠÙ… ŰŽŰšÙƒŰ© Ű§ÙŠŰ«Ű±Ù†ŰȘ Űčلى Ù†ŰžŰ§Ù…Ùƒ.\n"
+"Ù„Ű§ يمكنني ۧŰčۯۧۯ نوŰč Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ Ù‡Ű°Ű§."
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Burkina Faso"
-msgstr "ŰšÙˆŰ±ÙƒÙŠÙ†Ű§ÙŰ§ŰłÙˆ"
+msgid "Windows"
+msgstr "Windows"
-#: ../../lang.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Bangladesh"
-msgstr "ŰšÙ†ŰșÙ„Ű§ŰŻÙŠŰŽ"
+msgid "Can't make screenshots before partitioning"
+msgstr "Ù„Ű§ يمكنني Űșمل Ù„Ù‚Ű·Ű§ŰȘ Ù„Ù„ŰŽŰ§ŰŽŰ© Ù‚ŰšÙ„ Ű§Ù„ŰȘŰŹŰČŰŠŰ©"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Barbados"
-msgstr "ŰšŰ§Ű±ŰšŰ§ŰŻÙˆŰł"
+msgid "Host Name"
+msgstr "Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Ű§Ù„ŰšÙˆŰłÙ†Ű© و Ű§Ù„Ù‡Ű±ŰłÙƒ"
+msgid "/File/Save _As"
+msgstr "/ملف/Ű­ÙŰž _ŰšŰ§ŰłÙ…"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Azerbaijan"
-msgstr "ŰŁŰ°Ű±ŰšÙŠŰŹŰ§Ù†"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr ""
+"Ù„Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Űčلى ŰźŰ§ŰŻÙ…Ű§ŰȘ CUPS Ű§Ù„ŰšŰčÙŠŰŻŰ© في ŰŽŰšÙƒŰȘك Ű§Ù„Ù…Ű­Ù„ÙŠŰ© ŰȘŰ­ŰȘۧۏ ÙÙ‚Ű· Ű§Ù„Ù‰ "
+"ŰȘŰŽŰșيل ŰźÙŠŰ§Ű± \"ۧŰč۫۱ Űčلى Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű© Űčلى Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű§ŰȘ Ű§Ù„ŰšŰčÙŠŰŻŰ©\"; ŰłŰȘقوم "
+"ŰźŰ§ŰŻÙ…Ű§ŰȘ CUPS ۚۄŰčÙ„Ű§Ù… Ù…Ű§ÙƒÙŠÙ†ŰȘك Űčن Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…ÙˆŰŹÙˆŰŻŰ© Ù„ŰŻÙŠÙ‡Ű§. ÙƒŰ§ÙŰ© Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„ŰȘي ŰȘم "
+"Ű§Ù„ŰȘŰčŰ±Ù ŰčÙ„ÙŠÙ‡Ű§ من Ù‚ÙŰšÙ„ Ù…Ű§ÙƒÙŠÙ†ŰȘك Ù…ÙˆŰŹÙˆŰŻŰ© في Ù‚ŰłÙ… \"Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„ŰšŰčÙŠŰŻŰ©\" Űčلى Ù†Ű§ÙŰ°Ű© "
+"Printerdrake Ű§Ù„Ű±ŰŠÙŠŰłÙŠŰ©. ۧ۰ۧ لم ŰȘكن ŰźŰ§ŰŻÙ…Ű§ŰȘ CUPS في ŰŽŰšÙƒŰȘك Ű§Ù„Ù…Ű­Ù„ÙŠŰ©, فŰčليك ŰŁÙ† "
+"ŰȘقوم ŰšŰ„ŰŻŰźŰ§Ù„ ŰčÙ†Ű§ÙˆÙŠÙ† IP و ŰŁŰ±Ù‚Ű§Ù… Ű§Ù„Ù…Ù†Ű§ÙŰ° (ۧ۟ŰȘÙŠŰ§Ű±ÙŠ) Ù„Ù„Ű­Ű”ÙˆÙ„ Űčلى مŰčÙ„ÙˆÙ…Ű§ŰȘ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ "
+"من Ű§Ù„ŰźŰ§ŰŻÙ…Ű§ŰȘ."
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Aruba"
-msgstr "ŰŁŰ±ÙˆŰšŰ§"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr "%s ŰșÙŠŰ± Ù…ÙˆŰŹÙˆŰŻ في Ù‚Ű§ŰčŰŻŰ© ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„Ù…Ű§ŰłŰ­Ű§ŰȘ Ű§Ù„Ű¶ÙˆŰŠÙŠŰ©, هل ŰȘŰ±ÙŠŰŻ ŰȘÙ‡ÙŠŰŠŰȘه ÙŠŰŻÙˆÙŠŰ§Ù‹ŰŸ"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "Australia"
-msgstr "ŰŁÙˆŰłŰȘŰ±Ű§Ù„ÙŠŰ§"
+msgid "Delay before booting default image"
+msgstr "ŰȘوقيŰȘ Ù…Ű§ Ù‚ŰšÙ„ Ű§Ù‚Ù„Ű§Űč Ű§Ù„Ű”ÙˆŰ±Ű© Ű§Ù„Ű§ÙŰȘŰ±Ű§Ű¶ÙŠŰ©"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "American Samoa"
-msgstr "ŰłŰ§Ù…ÙˆŰ§ Ű§Ù„ŰŁÙ…Ű±ÙŠÙƒÙŠŰ©"
+msgid "Restrict command line options"
+msgstr "ŰȘŰŽŰŻÙŠŰŻ ŰźÙŠŰ§Ű±Ű§ŰȘ ۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű±"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Argentina"
-msgstr "Ű§Ù„ŰŁŰ±ŰŹÙ†ŰȘين "
+msgid "East Europe"
+msgstr "ŰŁÙˆŰ±ÙˆŰšÙ‘Ű§ Ű§Ù„ŰŽÙ‘Ű±Ù‚ÙŠÙ‘Ű©"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Antarctica"
-msgstr "Ű§Ù„Ù‚Ű·Űš Ű§Ù„ŰŹÙ†ÙˆŰšÙŠ"
+msgid "Use free space"
+msgstr "ۧ۳ŰȘŰčمل Ű§Ù„Ù…ŰłŰ§Ű­Ű© Ű§Ù„ÙŰ§Ű±ŰșŰ©"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Angola"
-msgstr "ŰŁÙ†ŰșÙˆÙ„Ű§"
+msgid "use dhcp"
+msgstr "ۧ۳ŰȘŰźŰŻÙ… dhcp"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Netherlands Antilles"
-msgstr "ŰŁÙ†ŰȘيل Ù‡ÙˆÙ„Ù†ŰŻŰ§"
+msgid "Mail alert"
+msgstr "ŰȘÙ†ŰšÙŠŰ© ŰšŰ±ÙŠŰŻÙŠ"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Armenia"
-msgstr "ŰŁŰ±Ù…ÙŠÙ†ÙŠŰ§"
+msgid "Internet configuration"
+msgstr "ۧŰčۯۧۯۧŰȘ Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ"
#: ../../lang.pm:1
#, c-format
-msgid "Albania"
-msgstr "ŰŁÙ„ŰšŰ§Ù†ÙŠŰ§"
+msgid "Uzbekistan"
+msgstr "ŰŁÙˆŰČŰšÙƒŰłŰȘŰ§Ù†"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Anguilla"
-msgstr "ŰŁÙ†ŰșÙˆÙŠÙ„Ű§"
+msgid "Detected %s"
+msgstr "ŰȘم Ű§Ù„ŰȘŰ­Ù‚Ù‚ من %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Antigua and Barbuda"
-msgstr "ŰŁÙ†ŰȘيŰșÙˆŰ§ و ŰšŰ§Ű±ŰšÙˆŰŻŰ§"
+msgid "/Autodetect _printers"
+msgstr "/ŰȘŰ­Ù‚Ù‚ ŰąÙ„ÙŠ من Ű§Ù„_۷ۧۚŰčۧŰȘ"
-#: ../../lang.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "United Arab Emirates"
-msgstr "Ű§Ù„Ű„Ù…Ű§Ű±Ű§ŰȘ Ű§Ù„ŰčŰ±ŰšÙŠŰ© Ű§Ù„Ù…ŰȘŰ­ŰŻŰ©"
+msgid "Finish"
+msgstr "Ű„Ù†ŰȘÙ‡Ű§ŰĄ"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Andorra"
-msgstr "ŰŁÙ†ŰŻÙˆŰ±Ű§"
+msgid "Show automatically selected packages"
+msgstr "ŰŁŰžÙ‡Ű± Ű§Ù„Ű­ŰČم Ű§Ù„Ù…ŰźŰȘۧ۱۩ ŰŁÙ„ÙŠŰ§Ù‹"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Afghanistan"
-msgstr "ŰŁÙŰșŰ§Ù†ŰłŰȘŰ§Ù†"
+msgid "CPU flags reported by the kernel"
+msgstr "CPU flags reported by the kernel"
#: ../../lang.pm:1
#, c-format
-msgid "default:LTR"
-msgstr "default:RTL"
-
-#: ../../loopback.pm:1
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Circular mounts %s\n"
-
-#: ../../lvm.pm:1
-#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Ű§Ű­Ű°Ù logical volumes ŰŁÙˆÙ„Ű§Ù‹\n"
-
-#: ../../modules.pm:1
-#, c-format
-msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"ŰŻŰčم PCMCIA ŰșÙŠŰ± Ù…ÙˆŰŹÙˆŰŻ ŰšŰčŰŻ Ű§Ù„ŰąÙ† Ù„Ű„Ű”ŰŻŰ§Ű± Ű§Ù„Ù†ÙˆŰ§Ű© 2.2. ÙŰ¶Ù„Ű§ ۧ۳ŰȘŰźŰŻÙ… Ű§Ù„Ű„Ű”ŰŻŰ§Ű± 2.4"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "Ű­Ű±Ùƒ ŰčŰŹÙ„Ű© Ű§Ù„ÙŰŁŰ±Ű©!"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "To activate the mouse,"
-msgstr "لŰȘÙ†ŰŽÙŠŰ· Ű§Ù„ÙŰŁŰ±Ű©,"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "Please test the mouse"
-msgstr "من ÙŰ¶Ù„Ùƒ ۧ۟ŰȘۚ۱ Ű§Ù„ÙŰŁŰ±Ű©"
+msgid "Togo"
+msgstr "ŰȘÙˆŰŹÙˆ"
-#: ../../mouse.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "No mouse"
-msgstr "Ù„Ű§ ÙŰŁŰ±Ű©"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr "Ű­Ű”Ù„ ŰŽŰŠ ۟۷ۣ! - هل ŰȘم ŰȘŰ«ŰšÙŠŰȘ mkisofs?"
-#: ../../mouse.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "none"
-msgstr "Ù„Ű§ ŰŽŰŠ"
+msgid "16 MB"
+msgstr "16 ميŰșŰ§ŰšŰ§ÙŠŰȘ"
-#: ../../mouse.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "3 buttons"
-msgstr "3 ŰŁŰČ۱ۧ۱"
+msgid "Please try again"
+msgstr "۱ۏۧۥ ŰŹŰ§ÙˆÙ„ Ù…Ű±Ű© ŰŁŰźŰ±Ù‰"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "2 buttons"
-msgstr "ŰČŰ±Ù‘ÙŠÙ†"
+msgid "The model is correct"
+msgstr "Ű§Ù„Ű·Ű±Ű§ŰČ Ű”Ű­ÙŠŰ­"
-#: ../../mouse.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "1 button"
-msgstr "ŰČ۱ ÙˆŰ§Ű­ŰŻ"
+msgid "FAT resizing failed: %s"
+msgstr "ÙŰŽÙ„ ŰȘŰșÙŠÙŠŰ± Ű­ŰŹÙ… FAT: %s"
-#: ../../mouse.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "busmouse"
-msgstr "busmouse"
+msgid "Individual package selection"
+msgstr "ۧ۟ŰȘÙŠŰ§Ű± Ù…ÙŰ±ŰŻ Ù„Ù„Ű­ŰČم"
-#: ../../mouse.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid "This partition is not resizeable"
+msgstr "Ù‡Ű°Ű§ Ű§Ù„ŰȘÙ‚ŰłÙŠÙ… ŰșÙŠŰ± Ù‚Ű§ŰšÙ„ لŰȘŰșÙŠÙŠŰ± Ű§Ù„Ű­ŰŹÙ…"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (serial, old C7 type)"
+msgid "Location"
+msgstr "Ű§Ù„Ù…ÙƒŰ§Ù†"
-#: ../../mouse.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid "USA (cable-hrc)"
+msgstr "Ű§Ù„ÙˆÙ„Ű§ÙŠŰ§ŰȘ Ű§Ù„Ù…ŰȘÙ‘Ű­ŰŻŰ© Ű§Ù„ŰŁÙ…Ű±ÙŠÙƒÙŠÙ‘Ű© (cable-hrc)"
-#: ../../mouse.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "MM Series"
-msgstr "MM Series"
+msgid "Journalised FS"
+msgstr "Journalised FS"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid "Guatemala"
+msgstr "ŰșÙˆŰ§ŰȘÙŠÙ…Ű§Ù„Ű§"
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "This machine"
+msgstr "Ù‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű©"
-#: ../../mouse.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "Ű­Ű±Ù ŰłÙˆŰ§Ù‚Ű© DOS: %s (Ù…ŰŹŰ±ŰŻ ŰȘŰźÙ…ÙŠÙ†)\n"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select the files or directories and click on 'OK'"
+msgstr "ۧ۟ŰȘ۱ Ű§Ù„Ù…Ù„ÙŰ§ŰȘ ŰŁÙˆ Ű§Ù„ŰŁŰŻÙ„Ű© Ű«Ù… Ű§Ù†Ù‚Ű± 'ŰŁŰ¶Ù'"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid "Bahrain"
+msgstr "Ű§Ù„ŰšŰ­Ű±ÙŠÙ†"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "omit scsi modules"
+msgstr "SCSI Ű§Ù‡Ù…Ù„ ÙˆŰ­ŰŻŰ§ŰȘ Ű§Ù„"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Generic 3 Button Mouse"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr "ŰčŰ§ŰŠÙ„Ű© Ű§Ù„Ù…ŰčŰ§Ù„Ű­ (Ù…Ű«Ù„Ű§: 6 Ù„ÙŰŠŰ© i686)"
-#: ../../mouse.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Generic 2 Button Mouse"
+msgid ""
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
+msgstr ""
+"Ù„ŰŁÙ†Ùƒ ŰȘقوم ŰšŰ§Ù„ŰȘŰ«ŰšÙŠŰȘ Űčۚ۱ Ű§Ù„ŰŽŰšÙƒŰ©, ÙÙ‚ŰŻ ŰȘمŰȘ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰŽŰšÙƒŰ© Ù…ŰłŰšÙ‚Ű§Ù‹.\n"
+"Ű§Ù†Ù‚Ű± Ù…ÙˆŰ§ÙÙ‚ Ù„Ű­ÙŰž Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙƒ, ŰŁÙˆ Ű§Ù†Ù‚Ű± Ű§Ù„Űșۧۥ Ù„Ű„Űčۧۯ۩ ŰȘÙ‡ÙŠŰŠŰ© ÙˆŰ”Ù„Ű§ŰȘ Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ "
+"و Ű§Ù„ŰŽŰšÙƒŰ©.\n"
-#: ../../mouse.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "serial"
-msgstr "serial"
+msgid "Keyboard layout: %s\n"
+msgstr "Ù„ÙˆŰ­Ű© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­: %s\n"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
+"Ù‡Ù†Ű§ يمكنك ŰŁÙ† ŰȘŰźŰȘۧ۱ ۧ۰ۧ ÙƒŰ§Ù† ÙŠŰŹŰš Ù„Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…ŰȘŰ”Ù„Ű© ŰšÙ‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű© ŰŁÙ† ŰȘكون مŰȘÙˆÙŰ±Ű© "
+"Ù„Ù„Ù…Ű§ÙƒÙŠÙ†Ű§ŰȘ Ű§Ù„ŰŁŰźŰ±Ù‰ Űčلى Ű§Ù„ŰŽŰšÙƒŰ©."
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Wheel"
-msgstr "Wheel"
+msgid "Maltese (US)"
+msgstr "Ű§Ù„Ù…Ű§Ù„Ű·ÙŠŰ© (ŰŁÙ…Ű±ÙŠÙƒŰ§)"
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Generic"
-msgstr "Generic"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"ŰȘŰ­Ù…Ù‘Ù„ و ŰȘŰČيل ŰȘŰ­Ù…ÙŠÙ„ كل Ù†Ù‚Ű§Ű· ŰȘŰ­Ù…ÙŠÙ„ ŰŁÙ†ŰžÙ…Ű© Ù…Ù„ÙŰ§ŰȘ Ű§Ù„ŰŽŰšÙƒŰ© (NFS)و SMB (Ù…ŰŻÙŠŰ±\n"
+"Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ©/Windows) و NCP (NetWare)."
-#: ../../mouse.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid "Tvcard"
+msgstr "ŰšŰ·Ű§Ù‚Ű© Ű§Ù„ŰȘÙ„ÙŰ§ŰČ"
-#: ../../mouse.pm:1
-#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Toggle between normal/expert mode"
+msgstr "Ű§Ù„Ű§Ù†ŰȘÙ‚Ű§Ù„ Ű§Ù„Ù‰ Ű§Ù„ÙˆŰ¶Űč Ű§Ù„ŰčŰ§ŰŻÙŠ"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Generic PS2 Wheel Mouse"
+msgid "Size"
+msgstr "Ű­ŰŹÙ…"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "GRUB"
+msgstr "ŰșيŰșŰ§ŰšŰ§ÙŠŰȘ"
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Standard"
-msgstr "Ű§Ù„Ù‚ÙŠŰ§ŰłÙŠ"
+msgid "Greenland"
+msgstr "ŰșŰ±ÙŠÙ†Ù„Ű§Ù†ŰŻ"
#: ../../mouse.pm:1
#, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - Mouse"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Toggle between flat and group sorted"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Collapse Tree"
-msgstr "Collapse Tree"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Expand Tree"
-msgstr "Expand Tree"
-
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Info"
-msgstr "Ű§Ù„Ù…ŰčÙ„ÙˆÙ…Ű§ŰȘ"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Is this correct?"
-msgstr "هل Ù‡Ű°Ű§ Ű”Ű­ÙŠŰ­ ? "
-
-#: ../../my_gtk.pm:1
-#, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Error writing to file %s"
-msgstr "۟۷ۣ ŰŁŰ«Ù†Ű§ŰĄ Ű§Ù„ÙƒŰȘۧۚ۩ Ű§Ù„Ù‰ Ű§Ù„Ù…Ù„Ù %s"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Bad backup file"
-msgstr "ملف Ù†ŰłŰź ۭۧŰȘÙŠŰ§Ű·ÙŠ ŰłÙŠŰŠ"
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
-#: ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "ÙŰŽÙ„ŰȘ Ű§Ù„Ű„ŰłŰȘŰčۧۯ۩ من Ű§Ù„Ù…Ù„Ù %s: %s"
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr "ŰčÙ„Ű§Ù…Ű© Ű§Ù„ŰŽŰ±ÙŠŰ· Ù„ÙŠŰłŰȘ Ű§Ù„ŰčÙ„Ű§Ù…Ű© Ű§Ù„Ű”Ű­ÙŠŰ­Ű©. ŰčÙ„Ű§Ù…Ű© Ű§Ù„ŰŽŰ±ÙŠŰ· هي %s."
-#: ../../partition_table.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"ŰȘÙˆŰŹŰŻ Ù…ŰłŰ§Ű­Ű© ÙŰ§Ű±ŰșŰ© في ŰŹŰŻÙˆÙ„ Ű§Ù„ŰȘŰŹŰČۊۧŰȘ Ù„ŰŻÙŠÙƒ لكني Ù„Ű§ ŰŁŰłŰȘŰ·ÙŠŰč ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡Ű§.\n"
-"Ű§Ù„Ű­Ù„ Ű§Ù„ÙˆŰ­ÙŠŰŻ هو ŰŁÙ† ŰȘنقل Ű§Ù„ŰȘŰŹŰČۊۧŰȘ Ű§Ù„ŰŁŰłŰ§ŰłÙŠŰ© لŰȘŰ­Ű”Ù„ Űčلى Ű§Ù„Ù…ŰłŰ§Ű­Ű© ŰšÙŠÙ† Ű§Ù„ŰȘŰŹŰČۊۧŰȘ "
-"Ű§Ù„Ù…Ù…ŰȘŰŻŰ©."
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Ű§Ù„ŰȘŰŹŰČۊۧŰȘ Ű§Ù„Ù…Ù…ŰȘŰŻŰ© ŰșÙŠŰ± Ù…ŰŻŰčÙˆÙ…Ű© Űčلى Ù‡Ű°Ù‡ Ű§Ù„ŰšÙŠŰŠŰ©"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "mount failed: "
-msgstr "ÙŰŽÙ„ Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„: "
-
-#: ../../pkgs.pm:1
-#, c-format
-msgid "maybe"
-msgstr "Ű±ŰšÙ…Ű§"
+"ŰȘم Űčمل Ù…ŰŽŰ§Ű±ÙƒŰ© Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ Ù…ŰłŰšÙ‚Ű§Ù‹.\n"
+"و هي Ù…Ù…ÙƒÙ‘Ù†Ű© Ű­Ű§Ù„ÙŠŰ§Ù‹.\n"
+"\n"
+"Ù…Ű§Ű°Ű§ ŰȘŰ±ÙŠŰŻ ŰŁÙ† ŰȘفŰčÙ„ŰŸ"
-#: ../../pkgs.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "nice"
-msgstr "ŰžŰ±ÙŠÙ"
+msgid "Delete All NBIs"
+msgstr "Ű§Ű­Ű°Ù كل NBI"
-#: ../../pkgs.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "very nice"
-msgstr "ŰžŰ±ÙŠÙ ŰŹŰŻŰ§Ù‹"
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
+msgstr ""
-#: ../../pkgs.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "important"
-msgstr "مهم"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
+msgstr ""
+"if set, send the mail report to this email address else send it to root."
-#: ../../pkgs.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "must have"
-msgstr "ÙŠŰŹŰš ŰŁÙ† يكون Ù„ŰŻÙŠÙƒ"
+msgid "Which configuration of XFree do you want to have?"
+msgstr "ŰŁÙŠ ۧŰčۯۧۯ لـXFree ŰȘŰ±ÙŠŰŻŰŸ"
-#: ../../raid.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ű§Ù„ŰȘŰŹŰČۊۧŰȘ Ù„ÙŠŰłŰȘ ÙƒŰ§ÙÙŠŰ© Ù„Ù…ŰłŰȘوى RAID %d\n"
+msgid "More"
+msgstr "Ű§Ù„Ù…ŰČÙŠŰŻ"
-#: ../../raid.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "mkraid failed"
-msgstr "ÙŰŽÙ„ mkraid"
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+"ŰšÙ‡Ű°Ű§ Ű§Ù„Ù…ŰłŰȘوى Ű§Ù„ŰŁÙ…Ù†ÙŠ, يكون ۧ۳ŰȘŰźŰŻŰ§Ù… Ù‡Ű°Ű§ Ű§Ù„Ù†ŰžŰ§Ù… ÙƒŰźŰ§ŰŻÙ… ÙŠŰ”ŰšŰ­ Ù…Ù…ÙƒÙ†Ű§Ù‹.\n"
+"Ű§Ù„Ù…ŰłŰȘوى Ű§Ù„ŰŁÙ…Ù†ÙŠ ŰčŰ§Ù„Ù ŰšŰŽÙƒÙ„ ÙƒŰ§ÙÙŠ Ù„Ű§ŰłŰȘŰźŰŻŰ§Ù… Ù‡Ű°Ű§ Ű§Ù„Ù†ŰžŰ§Ù… ÙƒŰźŰ§ŰŻÙ… ÙŠŰłŰȘŰ·ÙŠŰč Ù‚ŰšÙˆÙ„\n"
+"ۧŰȘŰ”Ű§Ù„Ű§ŰȘ من ŰčÙ…Ù„Ű§ŰĄ ÙƒŰ«ÙŠŰ±ÙŠÙ†. Ù…Ù„Ű­ÙˆŰžŰ©: ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ù…Ű§ÙƒÙŠÙ†ŰȘك Ù…ŰŹŰ±ŰŻ Űčميل Űčلى Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ "
+"ÙŰ§Ù„ŰŁŰŹŰŻŰ± ŰšÙƒ ۧ۟ŰȘÙŠŰ§Ű± Ù…ŰłŰȘوى ŰŁÙ…Ù†ÙŠ ŰŁÙ‚Ù„."
-#: ../../raid.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "ÙŰŽÙ„ mkraid (Ű±ŰšÙ…Ű§ ŰȘكون Ű­ŰČÙ…Ű© raidtools Ù…ÙÙ‚ÙˆŰŻŰ©ŰŸ)"
+msgid "Account Password"
+msgstr "ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ± Ù„Ù„Ű­ŰłŰ§Űš"
-#: ../../raid.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Ù„Ű§ يمكن Ű§Ű¶Ű§ÙŰ© ŰȘŰŹŰČŰŠŰ© Ű§Ù„Ù‰ RAID _Ű§Ù„Ù…ŰŹÙ‡ŰČ_ md%d"
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
+msgstr ""
+"Ù„Ù‚ŰŻ Ù‚Ű±Ű±ŰȘ ŰȘŰ«ŰšÙŠŰȘ Ù…Ű­Ù…Ù‘Ù„ Ű§Ù„Ű„Ù‚Ù„Ű§Űč Űčلى ŰȘŰŹŰČŰŠŰ©.\n"
+"Ù‡Ű°Ű§ يŰčني ŰŁÙ†Ù‡ Ù„ŰŻÙŠÙƒ Ù…Ű­Ù…Ù‘Ù„ Ű„Ù‚Ù„Ű§Űč Űčلى Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű°ÙŠ ŰȘŰłŰȘŰźŰŻÙ…Ù‡ Ù„Ù„Ű„Ù‚Ù„Ű§Űč (Ù…Ű«Ű§Ù„: System "
+"Commander).\n"
+"\n"
+"Űčلى ŰŁÙŠ Ù‚Ű±Ű” ŰȘقوم ŰšŰ§Ù„Ű„Ù‚Ù„Ű§Űč۟"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Stop"
-msgstr "ŰȘوقف"
+msgid "Tajik keyboard"
+msgstr "Ù„ÙˆŰ­Ű© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­ Ű§Ù„Ű·Ű§ŰŹÙŠÙƒÙŠŰ©"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Start"
-msgstr "ۧۚۯۣ"
+msgid ""
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
+msgstr ""
+"يمكنك نقل ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„ŰȘي ŰȘم ŰčÙ…Ù„Ù‡Ű§ للـSpooler %s Ű§Ù„Ù‰ %s, Ű§Ù„Ù€spooler "
+"Ű§Ù„Ű­Ű§Ù„ÙŠ. كل ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ© (Ű§ŰłÙ… Ű§Ù„Ű·Ű§ŰšŰčŰ©, Ű§Ù„ÙˆŰ”Ù, Ű§Ù„Ù…ÙƒŰ§Ù†, نوŰč Ű§Ù„ÙˆŰ”Ù„Ű©, و ŰźÙŠŰ§Ű±Ű§ŰȘ "
+"Ű§Ù„Ű„Űčۯۧۯ Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠ) يŰȘم ŰŁŰźŰ°Ù‡Ű§, لكن لن يŰȘم نقل Ű§Ù„ÙˆŰžŰ§ŰŠÙ.\n"
+"Ù„Ű§ يمكن نقل كل Ű§Ù„Ű”ÙÙˆÙ Ù„Ù„ŰŁŰłŰšŰ§Űš Ű§Ù„ŰȘŰ§Ù„ÙŠŰ©:\n"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "On boot"
-msgstr "ŰčÙ†ŰŻ Ű§Ù„Ű„Ù‚Ù„Ű§Űč"
+msgid "Font List"
+msgstr "Ù‚Ű§ŰŠÙ…Ű© Ű§Ù„ŰźŰ·ÙˆŰ·"
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"No additional information\n"
-"about this service, sorry."
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
msgstr ""
-"ŰčÙÙˆŰ§Ù‹, Ù„Ű§ ŰȘÙˆŰŹŰŻ مŰčÙ„ÙˆÙ…Ű§ŰȘ\n"
-"Ű§Ű¶Ű§ÙÙŠŰ© Ű­ŰČل Ù‡Ű°Ù‡ Ű§Ù„Ű­ŰČÙ…Ű©."
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Services and deamons"
-msgstr "Ű§Ù„ŰźŰŻÙ…Ű§ŰȘ و Ű§Ù„Ù…Ű±Ű§Ù‚ŰšŰ§ŰȘ"
+msgid ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
+msgstr ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "stopped"
-msgstr "مŰȘÙˆÙ‚ÙŰ©"
+msgid "Select file"
+msgstr "ۧ۟ŰȘ۱ ملف"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "running"
-msgstr "ŰȘŰčمل"
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
+msgstr "ۧ۟ŰȘ۱ Ű§Ù„ŰŽŰšÙƒŰ© ŰŁÙˆ Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ Ű§Ù„ŰȘي ÙŠŰŹŰš ŰŁÙ† ŰȘكون Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…Ű­Ù„ÙŠŰ© مŰȘÙˆÙŰ±Ű© له:"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "ۧ۟ŰȘ۱ ŰŁÙŠ ŰźŰŻÙ…Ű§ŰȘ ŰȘŰ±ÙŠŰŻÙ‡Ű§ ŰŁÙ† ŰȘۚۯۣ ŰąÙ„ÙŠŰ§Ù‹ ŰčÙ†ŰŻ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ"
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr ""
+"يمكنك ۧ۳ŰȘŰźŰŻŰ§Ù… Ù‡Ű°Ù‡ Ű§Ù„ŰŁÙˆŰ§Ù…Ű± ŰŁÙŠŰ¶Ű§Ù‹ في Ű­Ù‚Ù„ \"ŰŁÙ…Ű± Ű§Ù„Ű·ŰšŰ§ŰčŰ©\" في Ù…Ű±ŰšŰčۧŰȘ Ű­ÙˆŰ§Ű± Ű§Ù„Ű·ŰšŰ§ŰčŰ© "
+"في Ű§Ù„ŰčŰŻÙŠŰŻ من Ű§Ù„ŰȘŰ·ŰšÙŠÙ‚Ű§ŰȘ, لكن Ù„Ű§ ŰȘقم Ù‡Ù†Ű§ ۚۄŰč۷ۧۥ Ű§ŰłÙ… Ű§Ù„Ù…Ù„Ù Ù„ŰŁÙ† Ű§Ù„Ù…Ù„Ù Ű§Ù„Ù…Ű·Ù„ÙˆŰš "
+"۷ۚۧŰčŰȘه يŰȘم ۧŰčŰ·Ű§Ű€Ù‡ من Ù‚ŰšÙ„ Ű§Ù„ŰȘŰ·ŰšÙŠÙ‚.\n"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Database Server"
-msgstr "ŰźŰ§ŰŻÙ… Ù‚ÙˆŰ§ŰčŰŻ ŰšÙŠŰ§Ù†Ű§ŰȘ"
+msgid "Japan"
+msgstr "Ű§Ù„ÙŠŰ§ŰšŰ§Ù†"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote Administration"
-msgstr "ۧۯۧ۱۩ Űčن ŰšŰčŰŻ"
+msgid "Print option list"
+msgstr "Ù‚Ű§ŰŠÙ…Ű© ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„Ű·Ű§ŰšŰčŰ©"
-#: ../../services.pm:1
+#: ../../standalone/localedrake:1
#, c-format
-msgid "File sharing"
-msgstr "Ù…ŰŽŰ§Ű±ÙƒŰ© Ű§Ù„Ù…Ù„ÙŰ§ŰȘ"
+msgid "The change is done, but to be effective you must logout"
+msgstr "ŰȘم Űčمل Ű§Ù„ŰȘŰșÙŠÙŠŰ±, و لكن ليŰȘم ŰȘفŰčيله ÙŠŰŹŰš Űčليك Ű§Ù„ŰźŰ±ÙˆŰŹ"
-#: ../../services.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Internet"
-msgstr "Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ"
+msgid "Search servers"
+msgstr "ۭۧۚ۫ في ŰŁŰŹÙ‡ŰČŰ© Ű§Ù„ŰźŰ§ŰŻÙ…"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printing"
-msgstr "Ű§Ù„Ű·ŰšŰ§ŰčŰ©"
+msgid "NCP queue name missing!"
+msgstr "Ű§ŰłÙ… Ű”Ù NCP Ù…ÙÙ‚ÙˆŰŻ!"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "ŰȘۚۯۣ ŰźŰ§ŰŻÙ… ŰźŰ·ÙˆŰ· X (Ù‡Ű°Ű§ Ű§Ù„ŰČŰ§Ù…ÙŠ لكي يŰčمل XFree)"
+msgid ""
+"Warning, another internet connection has been detected, maybe using your "
+"network"
+msgstr "ŰȘŰ­Ű°ÙŠŰ±, ŰȘم Ű§ÙŠŰŹŰ§ŰŻ ۧŰȘŰ”Ű§Ù„ Ű„Ù†ŰȘŰ±Ù†ŰȘ ۹۟۱, Ű±ŰšÙ…Ű§ يكون ÙŠŰłŰȘŰźŰŻÙ… ŰŽŰšÙƒŰȘك"
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Ű­Ù…Ù‘Ù„ Ù…ŰŽŰșÙ„Ű§ŰȘ ŰŁŰŹÙ‡ŰČŰ© USB."
+msgid "Cd-Rom labeled \"%s\""
+msgstr "Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹ Ű§Ù„Ù…ŰłÙ…Ù‰ \"%s\""
#: ../../services.pm:1
#, c-format
msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
msgstr ""
-"Syslog هي Ű§Ù„ÙˆŰłÙŠÙ„Ű© Ű§Ù„ŰȘي ŰȘŰłŰȘŰźŰŻÙ…Ù‡Ű§ Ű§Ù„ŰčŰŻÙŠŰŻ من Ű§Ù„Ù…Ű±Ű§Ù‚ŰšŰ§ŰȘ لŰȘŰłŰŹÙŠÙ„ Ű§Ù„Ű±ŰłŰ§ŰŠÙ„\n"
-"Ű§Ù„Ù‰ Ù…Ù„ÙŰ§ŰȘ ŰłŰŹÙ„Ű§ŰȘ ŰčŰŻÙŠŰŻŰ©. Ű§Ù†Ù‡Ű§ ÙÙƒŰ±Ű© ŰŹÙŠŰŻŰ© ŰŁÙ† ŰȘقوم ŰŻŰ§ŰŠÙ…Ű§Ù‹ ŰšŰȘŰŽŰșيل syslog."
-
-#: ../../services.pm:1
-#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "ÙŠŰŽŰșل Ù†ŰžŰ§Ù… Ű§Ù„Ű”ÙˆŰȘ Űčلى ŰŹÙ‡Ű§ŰČك"
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
msgstr ""
-"ŰšŰ±ÙˆŰȘوكول rwho ÙŠŰłÙ…Ű­ Ù„Ù„Ù…ŰłŰȘŰźŰŻÙ…ÙŠÙ† Ű§Ù„ŰšŰčÙŠŰŻÙŠÙ† ŰšŰ§Ù„Ű­Ű”ÙˆÙ„ Űčلى Ù‚Ű§ŰŠÙ…Ű© ŰšÙƒÙ„ Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…ÙŠÙ†\n"
-"Ű§Ù„Ű°ÙŠÙ† ŰłŰŹÙ„ÙˆŰ§ Ű§Ù„ŰŻŰźÙˆÙ„ Ű§Ù„Ù‰ ŰŹÙ‡Ű§ŰČ ÙŠŰŽŰșّل Ù…Ű±Ű§Ù‚Űš rwho (Ù…Ù…Ű§Ű«Ù„ لـ finger)."
+"ŰȘŰč۰۱ Ű§Ù„ŰȘŰŁÙƒŰŻ من ۔ۭ۩ Ù†ŰžŰ§Ù… Ű§Ù„Ù…ÙŰ§ŰȘ %s. هل ŰȘŰ±ÙŠŰŻ ŰȘŰ”Ű­ÙŠŰ­ Ű§Ù„ŰŁŰźŰ·Ű§ŰĄ (كن Ű­Ű°Ű±Ű§Ù‹, يمكن ŰŁÙ† "
+"ŰȘ۟۳۱ ŰšÙŠŰ§Ù†Ű§ŰȘ)"
-#: ../../services.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"ŰšŰ±ÙˆŰȘوكول rusers ÙŠŰłÙ…Ű­ Ù„Ù„Ù…ŰłŰȘŰźŰŻÙ…ÙŠÙ† Űčلى Ű§Ù„ŰŽŰšÙƒŰ© ŰŁÙ† يŰȘŰčŰ±ÙÙˆŰ§ Űčلى من\n"
-"ŰłŰŹÙ„ Ű§Ù„ŰŻŰźÙˆÙ„ Ű§Ù„Ù‰ Ű§Ù„ŰŁŰŹÙ‡ŰČŰ© Ű§Ù„Ù…ŰłŰȘŰŹÙŠŰšŰ© Ű§Ù„ŰŁŰźŰ±Ù‰."
+msgid "Turn your computer into a reliable server"
+msgstr "ۧۏŰčل ŰŹÙ‡Ű§ŰČك ŰźŰ§ŰŻÙ…Ű§Ù‹ يŰčŰȘÙ…ŰŻ Űčليه"
-#: ../../services.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"ŰšŰ±ÙˆŰȘوكول rstat ÙŠŰłÙ…Ű­ Ù„Ù„Ù…ŰłŰȘŰźŰŻÙ…ÙŠÙ† Űčلى Ű§Ù„ŰŽŰšÙƒŰ© ۚۧ۳ŰȘ۱ۏۧŰč\n"
-"Ű§Ű­Ű”Ű§ŰŠÙŠŰ§ŰȘ ۹ۯۧۥ ŰŁÙŠ ŰŹÙ‡Ű§ŰČ Űčلى Ù‡Ű°Ù‡ Ű§Ù„ŰŽŰšÙƒŰ©."
+msgid " (driver %s)"
+msgstr " (driver %s)"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
+"Loopback file(s):\n"
+" %s\n"
msgstr ""
-"Ù…Ű±Ű§Ù‚Űš routed ÙŠŰłÙ…Ű­ ŰšŰȘŰ­ŰŻÙŠŰ« ŰŹŰŻÙˆÙ„ Ù…ÙˆŰŹÙ‡ IP Ű§Ù„ŰąÙ„ÙŠ (IP router table) Űčن Ű·Ű±ÙŠÙ‚\n"
-"ŰšŰ±ÙˆŰȘوكول RIP. ŰšÙŠÙ†Ù…Ű§ ÙŠŰłŰȘŰźŰŻÙ… RIP Űčلى Ű§Ù„ŰŽŰšÙƒŰ§ŰȘ Ű§Ù„Ű”ŰșÙŠŰ±Ű©, ŰȘŰ­ŰȘۧۏ Ű§Ù„ŰŽŰšÙƒŰ§ŰȘ Ű§Ù„ŰŁÙƒŰšŰ±\n"
-"Ű§Ù„Ù‰ ŰšŰ±ÙˆŰȘÙˆÙƒÙˆÙ„Ű§ŰȘ ŰȘÙˆŰŹÙŠÙ‡ مŰčÙ‚ŰŻŰ© ŰŁÙƒŰ«Ű±."
+"ملف(ۧŰȘ) Loopback:\n"
+" %s\n"
-#: ../../services.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
-msgstr ""
-"Űčين Ű§Ù„ŰŁŰŹÙ‡ŰČŰ© Ű§Ù„ŰźŰ§Ù… Ű§Ù„Ù‰ ŰŁŰŹÙ‡ŰČŰ© في ÙˆŰ¶Űč Ű§Ù„ÙƒÙ„ÙŠŰŽÙŠÙ‡ (Ù…Ű«Ù„ ŰȘŰŹŰČۊۧŰȘ\n"
-"Ű§Ù„ŰŁÙ‚Ű±Ű§Ű” Ű§Ù„Ű”Ù„ŰšŰ©), Ù„Ù„Ű§ŰłŰȘŰźŰ§Ù… في ŰȘŰ·ŰšÙŠÙ‚Ű§ŰȘ Ù…Ű«Ù„ Oracle ŰŁÙˆ Ù…ŰŽŰșÙ„Ű§ŰȘ DVD"
+msgid "I don't know"
+msgstr "Ù„Ű§ ŰŁŰčŰ±Ù "
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr ", Ù…ŰłŰȘŰ¶ÙŠÙ TCP/IP \"%s\", Ű§Ù„Ù…Ù†ÙŰ° \"%s\""
-#: ../../services.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
msgstr ""
-"Postfix هو Űčميل لنقل Ű§Ù„ŰšŰ±ÙŠŰŻ, ŰŁÙŠ Ű§Ù„ŰšŰ±Ù†Ű§Ù…ŰŹ Ű§Ù„Ű°ÙŠ ينقل Ű§Ù„ŰšŰ±ÙŠŰŻ من ŰŹÙ‡Ű§ŰČ Ű§Ù„Ù‰ ۹۟۱."
+"ŰŁÙ†ŰȘ Űčلى ÙˆŰŽÙƒ ŰȘÙ‡ÙŠŰŠŰ© Ù‚Ű±Ű” للŰȘŰ«ŰšÙŠŰȘ Ű§Ù„ŰąÙ„ÙŠ. Ù‡Ű°Ù‡ Ű§Ù„Ù…ÙŠŰČŰ© ۟۷۱۩ ŰšŰč۶ Ű§Ù„ŰŽŰŠ و ÙŠŰŹŰš "
+"ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡Ű§ ۭۚ۰۱.\n"
+"\n"
+"ŰšÙ‡Ű°Ù‡ Ű§Ù„Ù…ÙŠŰČŰ© يمكنك ۧŰčۧۯ۩ Űčمل Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ű°ÙŠ قمŰȘ ŰšÙ‡ Űčلى Ù‡Ű°Ű§ Ű§Ù„ÙƒÙ…ŰšÙŠÙˆŰȘ۱, مŰč ŰȘÙ†ŰšÙŠÙ‡Ùƒ "
+"Ù„ŰšŰč۶ Ű§Ù„ŰźŰ·ÙˆŰ§ŰȘ Ű§Ù„ŰȘي ÙŠŰŹŰš Űčليك ÙÙŠÙ‡Ű§ ŰȘŰșÙŠÙŠŰ± Ű§Ù„Ù‚ÙŠÙ…, Ű­ŰȘى ŰȘŰȘمكن من ŰȘŰșÙŠÙŠŰ±Ù‡Ű§.\n"
+"\n"
+"Ù„ŰŁÙ‚Ű”Ù‰ Ű­ŰŻ من Ű§Ù„ŰŁÙ…Ű§Ù†, ŰłŰȘŰȘم ŰȘŰŹŰČŰŠŰ© و ŰȘŰŹÙ‡ÙŠŰČ Ű§Ù„ŰŁÙ‚Ű±Ű§Ű” Ű§Ù„Ű”Ù„ŰšŰ© ŰšŰŽÙƒÙ„ ŰąÙ„ÙŠ, Ù…Ű«Ù„Ù…Ű§ ۧ۟ŰȘ۱ŰȘ "
+"ŰŁŰ«Ù†Ű§ŰĄ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ Űčلى Ù‡Ű°Ű§ Ű§Ù„ÙƒÙ…ŰšÙŠÙˆŰȘ۱.\n"
+"\n"
+"هل ŰȘŰ±ÙŠŰŻ Ű§Ù„Ù…ŰȘۧۚŰčŰ©ŰŸ"
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
msgstr ""
-"يقوم portmapper ۚۄۯۧ۱۩ ۧŰȘŰ”Ű§Ù„Ű§ŰȘ RPC, و Ű§Ù„ŰȘي ŰȘŰłŰȘŰźŰŻÙ… Űčن Ű·Ű±ÙŠÙ‚\n"
-"ŰšŰ±ÙˆŰȘÙˆÙƒÙˆÙ„Ű§ŰȘ Ù…Ű«Ù„ NFS و NIS. ŰźŰ§ŰŻÙ… portmap من Ű§Ù„Ù„Ű§ŰČم ŰŁÙ† يŰčمل Űčلى Ű§Ù„ŰŁŰŹÙ‡ŰČŰ©\n"
-"Ű§Ù„ŰȘي ŰȘŰčمل ÙƒŰźŰ§ŰŻÙ…Ű§ŰȘ ŰȘŰłŰȘŰźŰŻÙ… Ű§Ù„ŰšŰ±ÙˆŰȘÙˆÙƒÙˆÙ„Ű§ŰȘ Ű§Ù„ŰȘي ŰȘŰłŰȘÙÙŠŰŻ من ŰąÙ„ÙŠŰ© Űčمل RPC."
+"\n"
+"\n"
+"ŰšŰ·Ű§Ù‚ŰȘك ŰȘŰłŰȘŰźŰŻÙ… Ű§Ù„Ù…ŰŽŰșل %s\"%s\" Ű­Ű§Ù„ÙŠŰ§Ù‹ (Ű§Ù„Ù…ŰŽŰșل Ű§Ù„Ű­Ű§Ù„ÙŠ Ù„ŰšŰ·Ű§Ù‚ŰȘك هو \"%s\")"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"ŰŻŰčم PCMCIA مهم Ù„ŰŻŰčم ŰŁŰŽÙŠŰ§ŰĄ Ù…Ű«Ù„ ŰšŰ·Ű§Ù‚Ű§ŰȘ Ű§Ù„Ű„ÙŠŰ«Ű±Ù†ŰȘ و\n"
-"Ű§Ù„Ù…ÙˆŰŻÙ…Ű§ŰȘ Űčلى Ű§Ù„ŰŁŰŹÙ‡ŰČŰ© Ű§Ù„ŰŻÙŰȘŰ±ÙŠŰ©. لن يŰȘم ۚۯۥ Ù‡Ű°Ù‡ Ű§Ù„ŰźŰŻÙ…Ű© Ű§Ù„Ű§ ŰčÙ†ŰŻ ŰȘÙ‡ÙŠŰŠŰȘÙ‡Ű§ Ù„Ű°Ű§ ÙÙ„Ű§ "
-"Ù…ŰłÙƒÙ„Ű© ŰčÙ†ŰŻ ŰȘŰŽŰșيله\n"
-"Űčلى Ű§Ù„ŰŁŰŹÙ‡ŰČŰ© Ű§Ù„ŰȘي Ù„Ű§ ŰȘŰ­ŰȘŰ§ŰŹÙ‡."
+msgid "Post Uninstall"
+msgstr "Ù…Ű§ ŰšŰčŰŻ ۧŰČŰ§Ù„Ű© Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "ŰŻŰčم ۷ۧۚŰčۧŰȘ OKI 4w و Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…ŰȘÙˆŰ§ÙÙ‚Ű©."
+msgid " ("
+msgstr " ("
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"ŰȘقوم ŰšŰȘŰŽŰșيل مفŰȘۭۧ numlock ŰąÙ„ÙŠŰ§Ù‹ في ۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű±\n"
-"و XFree ŰčÙ†ŰŻ Ű§Ù„Ű„Ù‚Ù„Ű§Űč."
+msgid "Cpuid level"
+msgstr "Ù…ŰłŰȘوى Ù‡ÙˆÙŠŰ© Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS ŰšŰ±ÙˆŰȘوكول ێۧۊŰč Ù„Ù…ŰŽŰ§Ű±ÙƒŰ© Ű§Ù„Ù…Ù„ÙŰ§ŰȘ Űčلى ŰŽŰšÙƒŰ§ŰȘ\n"
-"TCP/IP. Ù‡Ű°Ù‡ Ű§Ù„ŰźŰŻÙ…Ű© ŰȘŰłÙ…Ű­ لك ŰšŰ§Ù„ŰȘŰ­ÙƒÙ… ŰšŰ§Ù„Ù…Ù„ÙŰ§ŰȘ Űčن Ű·Ű±ÙŠÙ‚ NFS."
+msgid "Mongolian (cyrillic)"
+msgstr "Ű§Ù„Ù…Ù†ŰșÙˆÙ„ÙŠŰ© (ŰłÙŠŰ±ÙŠÙ„ÙŠŰ©)"
-#: ../../services.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS ŰšŰ±ÙˆŰȘوكول ێۧۊŰč Ù„Ù…ŰŽŰ§Ű±ÙƒŰ© Ű§Ù„Ù…Ù„ÙŰ§ŰȘ Űčلى ŰŽŰšÙƒŰ§ŰȘ TCP/IP.\n"
-"Ù‡Ű°Ù‡ Ű§Ù„ŰźŰŻÙ…Ű© ŰȘÙˆÙŰ± ÙˆŰžŰ§ŰŠÙ NFS Ù„Ù„ŰŁŰŹÙ‡ŰČŰ© Ű§Ù„ŰźŰ§ŰŻÙ…Ű©, و Ű§Ù„ŰȘي يŰȘم ŰȘÙ‡ÙŠŰŠŰȘÙ‡Ű§ Űčن Ű·Ű±ÙŠÙ‚\n"
-"ملف /etc/exports."
+msgid "Add a module"
+msgstr "Ű§Ű¶Ű§ÙŰ© ÙˆŰ­ŰŻŰ©"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"ŰȘÙ†ŰŽŰ·/ŰȘŰźÙ…ŰŻ كل ÙˆŰ§ŰŹÙ‡Ű§ŰȘ Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…Ù‡ÙŠŰŠŰ© كي ŰȘۚۯۣ\n"
-"ŰčÙ†ŰŻ ۚۯۥ Ű§Ù„Ű„Ù‚Ù„Ű§Űč."
+msgid "Profile to delete:"
+msgstr "Ű§Ù„ŰȘŰŽÙƒÙŠÙ„ Ű§Ù„Ù…Ű·Ù„ÙˆŰš Ű­Ű°ÙÙ‡:"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"ŰȘŰ­Ù…Ù‘Ù„ و ŰȘŰČيل ŰȘŰ­Ù…ÙŠÙ„ كل Ù†Ù‚Ű§Ű· ŰȘŰ­Ù…ÙŠÙ„ ŰŁÙ†ŰžÙ…Ű© Ù…Ù„ÙŰ§ŰȘ Ű§Ù„ŰŽŰšÙƒŰ© (NFS)و SMB (Ù…ŰŻÙŠŰ±\n"
-"Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ©/Windows) و NCP (NetWare)."
+msgid "Local measure"
+msgstr "ۧۏ۱ۧۥ Ù…Ű­Ù„ÙŠ"
-#: ../../services.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) هو ŰźŰ§ŰŻÙ… ŰŁŰłÙ…Ű§ŰĄ Ù†Ű·Ű§Ù‚ (DNS) و Ű§Ù„Ű°ÙŠ ÙŠŰłŰȘŰźŰŻÙ… لمŰčŰ±ÙŰ© ŰŁŰłÙ…Ű§ŰĄ Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙŰ§ŰȘ "
-"ŰŁÙˆ ŰčÙ†Ű§ÙˆÙŠÙ† IP."
+msgid "busmouse"
+msgstr "busmouse"
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server, ÙŠŰłŰȘŰźŰŻÙ… لŰčمل ŰźŰ§ŰŻÙ… ŰčŰ§Ù„ÙŠ Ű§Ù„ŰŁŰŻŰ§ŰĄ\n"
-"و يŰčŰȘÙ…ŰŻ Űčليه."
+msgid "Account Login (user name)"
+msgstr "Ű§ŰłÙ… Ű§Ù„Ù…ŰŻŰźÙˆÙ„ Ù„Ù„Ű­ŰłŰ§Űš"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd هو Ù…Ű±Ű§Ù‚Űš Ű§Ù„Ű·ŰšŰ§ŰčŰ© Ű§Ù„Ű°ÙŠ ÙŠŰ­ŰȘŰ§ŰŹÙ‡ ŰŁÙ…Ű± lpr للŰčمل ŰšŰŽÙ„ Ű”Ű­ÙŠŰ­. ŰŁŰłŰ§ŰłŰ§Ù‹\n"
-"هو ŰźŰ§ŰŻÙ… ÙŠÙˆŰ”Ù„ ÙˆŰžŰ§ŰŠÙ Ű§Ù„Ű·ŰšŰ§ŰčŰ© Ű§Ù„Ù‰ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ."
+msgid "Fdiv bug"
+msgstr "Fdiv bug"
-#: ../../services.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
msgstr ""
-"Linuxconf يقوم في ŰšŰč۶ Ű§Ù„ŰŁŰ­ÙŠŰ§Ù† ŰšŰ§Ù„ŰȘ۱ŰȘÙŠŰš لŰčمل ŰšŰč۶ Ű§Ù„ŰŁŰčÙ…Ű§Ù„\n"
-"ŰčÙ†ŰŻ Ű§Ù„Ű„Ù‚Ù„Ű§Űč Ù„Ù„Ù…Ű­Ű§ÙŰžŰ© Űčلى ۧŰčۯۧۯۧŰȘ Ű§Ù„Ù†ŰžŰ§Ù…."
+"ۣۯۧ۩ ŰȘÙ‡ÙŠŰŠŰ© DrakFirewall\n"
+"\n"
+"ŰȘŰŁÙƒŰŻ من ŰŁÙ†Ùƒ قمŰȘ ŰšŰȘÙ‡ÙŠŰŠŰ© ۧŰȘŰ”Ű§Ù„Ùƒ ŰšŰ§Ù„ŰŽŰšÙƒŰ©/Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ ۚۧ۳ŰȘŰźŰŻŰ§Ù…\n"
+"drakconnect Ù‚ŰšÙ„ Ű§Ù„Ù…ŰȘۧۚŰčŰ©."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "ŰȘŰ­Ù‚Ù‚ و ŰȘÙ‡ÙŠŰŠŰ© ŰąÙ„ÙŠŰ© للŰčŰȘۧۯ ŰčÙ†ŰŻ Ű§Ù„Ű„Ù‚Ù„Ű§Űč."
+msgid "Benin"
+msgstr "ŰšÙ†ÙŠÙ†"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"ۧŰčۧۯ۩ ŰȘÙˆÙ„ÙŠŰŻ ŰąÙ„ÙŠŰ© لŰȘŰ±ÙˆÙŠŰłŰ© Ű§Ù„Ù†ÙˆŰ§Ű© في ŰŻÙ„ÙŠÙ„ /boot لـ\n"
-"/usr/include/linux/{autoconf,version}.h"
+msgid "Uruguay"
+msgstr "ŰŁÙˆŰ±ÙˆŰșÙˆŰ§ÙŠ"
-#: ../../services.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ù‡Ű°Ù‡ Ű§Ù„Ű­ŰČÙ…Ű© ŰȘقوم ŰšŰȘŰ­Ù…ÙŠÙ„ ŰźŰ±ÙŠŰ·Ű© Ù„ÙˆŰ­Ű© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­ Ű§Ù„Ù…ŰźŰȘۧ۱۩ ÙƒÙ…Ű§\n"
-"ŰȘم ŰȘŰčÙŠÙŠÙ†Ù‡Ű§ في /etc/sysconfig/keyboard. يمكن ۧ۟ŰȘÙŠŰ§Ű± Ù„ÙˆŰźŰ© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­ ۚۧ۳ŰȘŰźŰŻŰ§Ù… "
-"ۣۯۧ۩ kbdconfig.\n"
-"ÙŠŰŹŰš ŰȘŰ±ÙƒÙ‡Ű§ Ù…Ù…ÙƒÙ‘Ù†Ű© في ŰŁŰșÙ„Űš Ű§Ù„ŰŁŰŹÙ‡ŰČŰ©."
+msgid "Path selection"
+msgstr "Ű„ŰźŰȘÙŠŰ§Ű± Ű§Ù„Ù…ŰłŰ§Ű±"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
+msgid "Name/IP address of host:"
+msgstr "ŰčÙ†ÙˆŰ§Ù† IP/Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ:"
-#: ../../services.pm:1
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Monitor: %s\n"
+msgstr "Ű§Ù„ŰŽŰ§ŰŽŰ©: %s\n"
+
+#: ../../partition_table/raw.pm:1
#, c-format
msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
msgstr ""
-"Ù…Ű±Ű§Ù‚Űš Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ Ű§Ù„ŰŁŰłŰ§ŰłÙŠ (ÙŠŰłÙ…Ù‰ ŰčŰ§ŰŻŰ©Ù‹ ŰšÙ€ inetd) ÙŠŰšŰŻŰŁ\n"
-"Ù…ŰŹÙ…ÙˆŰčŰ© من ŰźŰŻÙ…Ű§ŰȘ Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ Ű§Ù„ŰŁŰźŰ±Ù‰ ŰčÙ†ŰŻ Ű§Ù„Ű­Ű§ŰŹŰ©. Ű§Ù†Ù‡ Ù…ŰłŰ€ÙˆÙ„ Űčن ۚۯۥ\n"
-"Ű§Ù„ŰčŰŻÙŠŰŻ من Ű§Ù„ŰźŰŻÙ…Ű§ŰȘ, ŰšÙ…Ű§ ÙÙŠÙ‡Ű§ telnet, ftp, rsh, و rlogin. ŰȘŰčŰ·ÙŠÙ„ inetd ŰłÙŠŰčŰ·Ù„\n"
-"كل Ű§Ù„ŰźŰŻÙ…Ű§ŰȘ Ű§Ù„Ù…Ű°ÙƒÙˆŰ±Ű©."
+"Ù‡Ù†Ű§Ùƒ ŰŽŰŠ ŰłÙŠŰŠ ÙŠŰ­Ű”Ù„ Ù„Ù„Ù‚Ű±Ű”. \n"
+"Ù„Ù‚ŰŻ ÙŰŽÙ„ ۧ۟ŰȘۚۧ۱ للŰȘŰŁÙƒŰŻ من ۔ۭ۩ Ű§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ. \n"
+"Ù‡Ű°Ű§ يŰčني ŰŁÙ† كŰȘۧۚ۩ ŰŁÙŠ ŰŽŰŠ Űčلى Ù‡Ű°Ű§ Ű§Ù„Ù‚Ű±Ű” ŰłÙŠÙ†ŰȘهي ŰšŰšÙŠŰ§Ù†Ű§ŰȘ ŰčŰŽÙˆŰ§ŰŠÙŠŰ© و ÙŰ§ŰłŰŻŰ©."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr "Apache هو ŰźŰ§ŰŻÙ… ÙˆÙŠŰš. و ÙŠÙŰłŰȘŰźŰŻÙ… Ù„ŰźŰŻÙ…Ű© Ù…Ù„ÙŰ§ŰȘ HTML و CGI."
+msgid "Printer host name or IP missing!"
+msgstr "Ű§ŰłÙ… Ù…ŰłŰȘŰ¶ÙŠÙ Ű§Ù„Ű·Ű§ŰšŰčŰ© ŰŁÙˆ Ű§Ù„Ù€ IP Ù…ÙÙ‚ÙˆŰŻ!"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake يقوم ŰšŰ§Ù„ŰȘŰ­Ù‚Ù‚ من Ű§Ù„ŰčŰȘۧۯ, و يقوم ŰšŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰčŰȘۧۯ\n"
-"Ű§Ù„ŰŹŰŻÙŠŰŻ/Ű§Ù„Ù…ŰȘŰșÙŠŰ± ŰšŰŽÙƒÙ„ ۧ۟ŰȘÙŠŰ§Ű±ÙŠ."
+msgid "Please check all users that you want to include in your backup."
+msgstr "۱ۏۧۥ ۧ۟ŰȘ۱ كل Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…ÙŠÙ† Ű§Ù„Ű°ÙŠÙ† ŰȘŰ±ÙŠŰŻ ŰȘŰ¶Ù…ÙŠÙ†Ù‡Ù… في Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ."
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
msgstr ""
-"يقوم GPM ŰšŰ„Ű¶Ű§ÙŰ© ŰŻŰčم Ű§Ù„ÙŰŁŰ±Ű© لŰȘŰ·ŰšÙŠÙ‚Ű§ŰȘ Ù„ÙŠÙ†ÙƒŰł في Ű§Ù„ÙˆŰ¶Űč Ű§Ù„Ù†Ű”ÙŠ Ù…Ű«Ù„\n"
-"Midnight Commander. Ű§Ű¶Ű§ÙŰ© Ű§Ù„Ù‰ Ű°Ù„Ùƒ ÙŰ„Ù†Ù‡ ÙŠŰłÙ…Ű­ ŰšŰčÙ…Ù„ÙŠŰ§ŰȘ Ű§Ù„Ù‚Ű” و Ű§Ù„Ù„Ű”Ù‚ في ۳۷۱ "
-"Ű§Ù„ŰŁÙˆŰ§Ù…Ű±,\n"
-"ÙƒÙ…Ű§ يŰȘŰ¶Ù…Ù† ŰŻŰčم Ű§Ù„Ù‚ÙˆŰ§ŰŠÙ… Ű§Ù„Ù…ŰźŰȘ۔۱۩ في ۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű±."
+"Ű§Ù„Ù…Ű§ŰłŰ­ Ű§Ù„Ű¶ÙˆŰŠÙŠ %s ÙŠŰŹŰš ۧŰčŰŻŰ§ŰŻÙ‡ Űčن Ű·Ű±ÙŠÙ‚ PrinterDrake.\n"
+"يمكن ŰȘŰŽŰșيل PrinterDrake من Ù…Ű±ÙƒŰČ ŰȘŰ­ÙƒÙ… Mandrake في Ù‚ŰłÙ… Ű§Ù„ŰčŰȘۧۯ."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron هو ŰšŰ±Ù†Ű§Ù…ŰŹ UNIX Ű§Ù„Ù‚ÙŠŰ§ŰłÙŠ لŰȘŰŽŰșيل Ű§Ù„ŰšŰ±Ű§Ù…ŰŹ Ű§Ù„Ù…Ű­ŰŻŰŻŰ© من Ù‚ŰšÙ„ Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…\n"
-"ŰčÙ†ŰŻ ŰŁŰŻÙˆÙ‚Ű§ŰȘ Ù…Ű­ŰŻŰŻŰ© ŰŻÙˆŰ±ÙŠŰ§Ù‹. vixie cron ÙŠŰ¶ÙŠÙ ŰčŰŻŰŻŰ§Ù‹ من Ű§Ù„Ù…ŰČŰ§ÙŠŰ§ Ű§Ù„Ù‰ UNIX\n"
-"cron Ű§Ù„ŰŁŰłŰ§ŰłÙŠ, ŰšÙ…Ű§ ÙÙŠÙ‡Ű§ Ű­Ù…Ű§ÙŠŰ© ŰŁÙ…Ù†ÙŠŰ© ŰŁÙŰ¶Ù„, و ŰźÙŠŰ§Ű±Ű§ŰȘ ŰȘÙ‡ÙŠŰŠŰ© ŰŁÙ‚ÙˆÙ‰."
+msgid "Bangladesh"
+msgstr "ŰšÙ†ŰșÙ„Ű§ŰŻÙŠŰŽ"
-#: ../../services.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"ŰȘŰŽŰșل Ű§Ù„ŰŁÙˆŰ§Ù…Ű± Ű§Ù„Ù…ÙŰŹŰŻÙˆÙ„Ű© Űčن Ű·Ű±ÙŠÙ‚ ŰŁÙ…Ű± at ŰčÙ†ŰŻ Ű§Ù„ÙˆÙ‚ŰȘ Ű§Ù„Ù…Ű­ŰŻŰŻ\n"
-"لŰȘŰŽŰșيل at, و ŰȘقوم ŰšŰȘŰŽŰșيل Ű§Ù„ŰŁÙˆŰ§Ù…Ű± Ű§Ù„ŰŻÙ‚ŰčÙŠŰ© ŰčÙ†ŰŻÙ…Ű§ يكون مŰȘÙˆŰłŰ· Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„ Ù‚Ù„ÙŠÙ„Ű§ÙŽ."
+msgid "Japan (cable)"
+msgstr "Ű§Ù„ÙŠŰ§ŰšŰ§Ù† (cable)"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
-"ŰȘÙŰłŰȘŰźŰŻÙ… apmd Ù„Ù…Ű±Ű§Ù‚ŰšŰ© Ű­Ű§Ù„Ű© Ű§Ù„ŰšŰ·Ű§Ű±ÙŠŰ© و ŰȘŰłŰŹÙŠÙ„Ù‡Ű§ Űčن Ű·Ű±ÙŠÙ‚ syslog.\n"
-"يمكن ÙƒŰ°Ù„Ùƒ ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡Ű§ Ù„Ű„ŰșÙ„Ű§Ù‚ Ű§Ù„ŰŹÙ‡Ű§ŰČ ŰčÙ†ŰŻ ۶Űčف Ű§Ù„ŰšŰ·Ű§Ű±ÙŠŰ©."
-
-#: ../../services.pm:1
-#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron ۣۯۧ۩ لŰȘŰŽŰșيل Ű§Ù„ŰŁÙˆŰ§Ù…Ű± في ŰŁÙˆÙ‚Ű§ŰȘ Ù…Ű­ŰŻŰŻŰ©."
+"\n"
+"ŰŁÙ‡Ù„Ű§Ù‹ ŰšÙƒÙ… في مŰčŰ§Ù„ŰŹ ۧŰčۯۧۯ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ\n"
+"Ù‡Ű°Ű§ Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ ŰłÙŠŰłŰ§ŰčŰŻÙƒ Űčلى ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ű·Ű§ŰšŰčŰ©/Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…ÙˆŰ”ÙˆÙ„Ű© ŰšÙ‡Ű°Ű§ Ű§Ù„ÙƒÙ…ŰšÙŠÙˆŰȘ۱ ŰŁÙˆ "
+"Ű§Ù„Ù…ÙˆŰ”ÙˆÙ„Ű© Ù…ŰšŰ§ŰŽŰ±Ű©Ù‹ ŰšŰ§Ù„ŰŽŰšÙƒŰ© ŰŁÙˆ ŰšÙ…Ű§ÙƒÙŠÙ†Ű© Windows ŰšŰčÙŠŰŻŰ©.\n"
+"\n"
+"ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ù„ŰŻÙŠÙƒ ۷ۧۚŰčŰ©/۷ۧۚŰčۧŰȘ Ù…ÙˆŰ”ÙˆÙ„Ű© ŰšÙ‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű©, ÙŰ¶Ù„Ű§Ù‹ قم ŰšŰȘÙˆŰ”ÙŠÙ„Ù‡Ű§ Ű§Ù„Ù‰ Ù‡Ű°Ű§ "
+"Ű§Ù„ÙƒÙ…ŰšÙŠÙˆŰȘ۱ و قم ŰšŰȘŰŽŰșÙŠÙ„Ù‡Ű§ كي يŰȘم Ű§Ù„ŰȘŰ­Ù‚Ù‚ Ù…Ù†Ù‡Ű§/منهم ŰąÙ„ÙŠŰ§Ù‹. ŰŁÙŠŰ¶Ű§Ù‹ ÙŠŰŹŰš ŰŁÙ† ŰȘكون ۷ۧۚŰčŰ©/"
+"۷ۧۚŰčۧŰȘ Ű§Ù„ŰŽŰšÙƒŰ© و ŰŁŰŹÙ‡ŰČŰ© Windows Ù…ÙˆŰ”ÙˆÙ„Ű© و Ù…ŰŽŰșÙ‘Ù„Ű©.\n"
+"\n"
+"Ù„Ű§Ű­Űž ŰŁÙ† Ű§Ù„ŰȘŰ­Ù‚Ù‚ Ű§Ù„ŰąÙ„ÙŠ من Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Űčلى Ű§Ù„ŰŽŰšÙƒŰ© Ù‚ŰŻ ÙŠŰłŰȘŰșŰ±Ù‚ وقŰȘŰ§Ù‹ ŰŁŰ·ÙˆÙ„ من Ű§Ù„ŰȘŰ­Ù‚Ù‚ "
+"Ű§Ù„ŰąÙ„ÙŠ من Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…ÙˆŰ”ÙˆÙ„Ű© ŰšÙ‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű© ÙÙ‚Ű·. Ù„Ű°Ű§ قم ŰšŰȘŰčŰ·ÙŠÙ„ Ű§Ù„ŰȘŰ­Ù‚Ù‚ Ű§Ù„ŰąÙ„ÙŠ من "
+"۷ۧۚŰčۧŰȘ Ű§Ù„ŰŽŰšÙƒŰ© و/ŰŁÙˆ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…ŰłŰȘŰ¶Ű§ÙŰ© من Windows ۧ۰ۧ لم ŰȘكن ŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ Ù‡Ű°Ù‡ "
+"Ű§Ù„Ù…ÙŠŰČŰ©.\n"
+"\n"
+" Ű§Ù†Ù‚Ű± \"Ű§Ù„ŰȘŰ§Ù„ÙŠ\" ŰčÙ†ŰŻÙ…Ű§ ŰȘكون Ù…ŰłŰȘŰčŰŻŰ§Ù‹, و Űčلى \"Ű§Ù„Űșۧۥ\" ۧ۰ۧ لم ŰȘكن ŰȘŰ±ÙŠŰŻ ۧŰčۯۧۯ "
+"Ű§Ù„Ű·Ű§ŰšŰčŰ©/Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„ŰąÙ†."
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "ŰȘŰŽŰșّل Ù†ŰžŰ§Ù… Ű§Ù„Ű”ÙˆŰȘ ALSA (Advanced Linux Sound Arachitecture)"
+msgid "Initial tests"
+msgstr "Ű§Ù„Ű„ŰźŰȘۚۧ۱ۧŰȘ Ű§Ù„ŰŁÙˆÙ„ÙŠŰ©"
-#: ../../standalone.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Installing packages..."
-msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰ±ÙƒÙŠŰš Ű§Ù„ŰŹŰČم..."
+msgid "Continue"
+msgstr "ŰȘۧۚŰč"
-#: ../../standalone.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-msgstr ""
-"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+msgid "Custom Restore"
+msgstr "ۧ۳ŰȘŰčۧۯ۩ Ù…ŰźŰ”Ű”Ű©"
-#: ../../standalone.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
msgstr ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
+"\"%s\": ۧ۰ۧ ŰȘم Ű§ÙƒŰȘŰŽŰ§Ù ŰšŰ·Ű§Ù‚Ű© Ű”ÙˆŰȘ Űčلى Ù†ŰžŰ§Ù…Ùƒ, ŰłÙŠŰȘم ŰčŰ±Ű¶Ù‡Ű§\n"
+"Ù‡Ù†Ű§. ۧ۰ۧ Ù„Ű§Ű­ŰžŰȘ ŰŁÙ† ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű”ÙˆŰȘ Ű§Ù„Ù…ŰčŰ±ÙˆŰ¶Ű© Ù‡Ù†Ű§ Ù„ÙŠŰłŰȘ ŰȘلك Ű§Ù„Ù…ÙˆŰŹÙˆŰŻŰ©\n"
+"فŰčÙ„Ű§Ù‹ Űčلى Ù†ŰžŰ§Ù…Ùƒ, يمكنك Ű§Ù„Ù†Ù‚Ű± Űčلى Ű§Ù„ŰČ۱ و ۧ۟ŰȘÙŠŰ§Ű± Ù…ŰŽŰșل\n"
+"۹۟۱."
-#: ../../standalone.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+msgid "Script-based"
+msgstr "Script-based"
-#: ../../standalone.pm:1
+#: ../../install_any.pm:1 ../../partition_table.pm:1
#, c-format
-msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
-msgstr ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgid "Error reading file %s"
+msgstr "۟۷ۣ في Ù‚Ű±Ű§ŰĄŰ© Ű§Ù„Ù…Ù„Ù %s"
-#: ../../standalone.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "PLL setting:"
+msgstr "ۧŰčۯۧۯ PLL:"
-#: ../../standalone.pm:1
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
-msgstr ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "Ù„ŰŻÙŠÙƒ ŰȘŰŹŰČŰŠŰ© FAT ŰȘم ŰȘŰ­Ù…ÙŠÙ„Ù‡Ű§ Űčلى /boot/efi"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgid " on "
+msgstr " Űčلى "
-#: ../../standalone.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "[keyboard]"
-msgstr "[keyboard]"
+msgid "The URL must begin with http:// or https://"
+msgstr "Ű§Ù„ŰčÙ†ÙˆŰ§Ù† ÙŠŰŹŰš ŰŁÙ† ÙŠŰšŰŻŰŁ ŰšÙ€ http:// ŰŁÙˆ https://"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
msgstr ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
+"يمكنك ŰȘŰ­ŰŻÙŠŰŻ Ű§Ù„Ù€URI Ù…ŰšŰ§ŰŽŰ±Ű© Ù„Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ Ű§Ù„Ű·Ű§ŰšŰčŰ©. Ű§Ù„Ù€URI ÙŠŰŹŰš ŰŁÙ† يŰȘÙˆŰ§ÙÙ‚ مŰč "
+"مŰȘŰ·Ù„ŰšŰ§ŰȘ CUPS ŰŁÙˆ Foomatic. Ù„Ű§Ű­Ű· ŰŁÙ†Ù‡ Ù„ÙŠŰłŰȘ كل ŰŁÙ†ÙˆŰ§Űč Ű§Ù„Ù€URI Ù…ŰŻŰčÙˆÙ…Ű© من "
+"Ű§Ù„Ù€spoolers."
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
-msgstr ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
+msgid "Other OS (SunOS...)"
+msgstr "Ù†ŰžŰ§Ù… ۹۟۱ (SunOS...)"
-#: ../../standalone.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
-msgstr ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
+msgid "Install/Upgrade"
+msgstr "ŰȘŰ«ŰšÙŠŰȘ/ŰȘŰ±Ù‚ÙŠŰ©"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "%d packages"
+msgstr "%d Ű­ŰČم"
#: ../../standalone.pm:1
#, c-format
@@ -6709,4807 +6515,5162 @@ msgstr ""
"--help : show this message.\n"
"--version : show version number.\n"
-#: ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Domain Authentication Required"
+msgstr "Domain Authentication Required"
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
msgstr ""
-" Ù‡Ű°Ű§ Ű§Ù„ŰšŰ±Ù†Ű§Ù…ŰŹ هو ŰšŰ±Ù†Ű§Ù…ŰŹ ۭ۱; يمكنك ۧŰčۧۯ۩ ŰȘوŰČيŰčŰ© و/ŰŁÙˆ ŰȘŰčŰŻÙŠÙ„Ù‡\n"
-" ŰȘŰ­ŰȘ ŰšÙ†ÙˆŰŻ ۱۟۔۩ GNU Ű§Ù„ŰčÙ…ÙˆÙ…ÙŠŰ© Ű§Ù„ŰŽŰ§Ù…Ù„Ű© (GPL) ÙƒÙ…Ű§ Ù†ÙŰŽÙŰ±ŰȘ Űčن Ű·Ű±ÙŠÙ‚\n"
-" ŰŹÙ…ŰčÙŠŰ© Ű§Ù„ŰšŰ±Ù…ŰŹÙŠŰ§ŰȘ Ű§Ù„Ű­Ű±Ű©; Ű„Ù…Ű§ ۧۄ۔ۯۧ۱ Ű§Ù„Ű«Ű§Ù†ÙŠ من Ű§Ù„ŰȘŰ±ŰźÙŠŰ” ŰŁÙˆ\n"
-" ŰŁÙŠ Ù†ŰłŰźŰ© ŰȘŰ§Ù„ÙŠŰ© (ۭ۳ۚ ۧ۟ŰȘÙŠŰ§Ű±Ùƒ).\n"
"\n"
-" Ù‡Ű°Ű§ Ű§Ù„ŰšŰ±Ù†Ű§Ù…ŰŹ يُوŰČَّŰč Űčلى ŰŁÙ…Ù„ ŰŁÙ† يكون Ù…ÙÙŠŰŻŰ§,\n"
-" لكن ŰŻÙˆÙ† ŰŁÙŠ Ű¶Ù…Ű§Ù†â€™; Ű­ŰȘى ŰšŰŻÙˆÙ† Ű§Ù„Ű¶Ù…Ű§Ù†Ű© Ű§Ù„Ù…ÙÙ‡ÙˆÙ…Ű©\n"
-" Ù„Ù„Ű„ŰȘۏۧ۱ ŰŁÙˆ Ű§Ù„Ù…Ù†Ű§ŰłŰšŰ© لŰș۱۶ مŰčين. Ű§Ù†ŰžŰ±\n"
-" ۱۟۔۩ GNU Ű§Ù„ŰčÙ…ÙˆÙ…ÙŠŰ© Ű§Ù„ŰŽŰ§Ù…Ù„Ű© للŰȘÙŰ§Ű”ÙŠÙ„.\n"
"\n"
-" ÙŠŰŹŰš ŰŁÙ† ŰȘكون Ù‚ŰŻ ŰȘŰłÙ„Ù…ŰȘ Ù†ŰłŰźŰ© من ŰȘŰ±ŰźÙŠŰ” GNU Ű§Ù„ŰčÙ…ÙˆÙ…ÙŠŰ© Ű§Ù„ŰŽŰ§Ù…Ù„Ű©\n"
-" مŰč Ű§Ù„ŰšŰ±Ù†Ű§Ù…ŰŹ; في Ű­Ű§Ù„Ű© ŰčŰŻÙ… ŰȘŰłÙ„Ù… Ű§Ù„Ű±ŰźŰ”Ű© Ű±Ű§ŰłÙ„ ŰŹÙ…ŰčÙŠŰ© Ű§Ù„ŰšŰ±Ù…ŰŹÙŠŰ§ŰȘ Ű§Ù„Ű­Ű±Ű© Űčلى Ű§Ù„ŰčÙ†ÙˆŰ§Ù† "
-"Ű§Ù„ŰȘŰ§Ù„ÙŠ\n"
-" Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA "
-"02111-1307,\n"
-" USA.\n"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Exit install"
-msgstr "Ű§Ù„ŰźŰ±ÙˆŰŹ من Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Install updates"
-msgstr "ŰȘŰ«ŰšÙŠŰȘ ŰȘŰ­ŰŻÙŠŰ«Ű§ŰȘ Ű§Ù„Ù†ŰžŰ§Ù…"
+" ŰŽÙƒŰ± ۟ۧ۔:\n"
+"\t- Ù…ŰŽŰ±ÙˆŰč LTSP http://www.ltsp.org\n"
+"\t- Ù…Ű§ÙŠÙƒÙ„ ŰšŰ±Ű§ÙˆÙ† <mbrown\\@fensystems.co.uk>\n"
+"\n"
-#: ../../steps.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Configure services"
-msgstr "ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰźŰŻÙ…Ű§ŰȘ"
+msgid "Costa Rica"
+msgstr "ÙƒÙˆŰłŰȘŰ§Ű±ÙŠÙƒŰ§"
-#: ../../steps.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Configure X"
-msgstr "ŰȘÙ‡ÙŠŰŠŰ© X"
+msgid "Use libsafe for servers"
+msgstr "Ű„ŰłŰȘŰźŰŻÙ… libsafe Ù„Ù„Ù…Ù„Ù‚Ù…Ű§ŰȘ"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Install bootloader"
-msgstr "ŰȘŰ«ŰšÙŠŰȘ Ù…Ű­Ù…Ù‘ÙÙ„ Ű§Ù„Ű„Ù‚Ù„Ű§Űč"
+msgid "Icelandic"
+msgstr "Ű§Ù„ŰąÙŠŰłÙ„Ű§Ù†ŰŻÙŠŰ©"
-#: ../../steps.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Configure networking"
-msgstr "ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰŽŰšÙƒŰ©"
+msgid ""
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
-#: ../../steps.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Add a user"
-msgstr "ŰŁŰ¶Ù Ù…ŰłŰȘŰźŰŻÙ…"
+msgid "Please relog into %s to activate the changes"
+msgstr "ÙŠŰ±ŰŹÙ‰ ۧŰčۧۯ۩ ŰȘŰłŰŹÙŠÙ„ Ű§Ù„ŰŻŰźÙˆÙ„ Ű§Ù„Ù‰ %s لŰȘÙ†ŰŽÙŠŰ· Ű§Ù„ŰȘŰșÙŠÙŠŰ±Ű§ŰȘ"
-#: ../../steps.pm:1
+#: ../../my_gtk.pm:1
#, c-format
-msgid "Root password"
-msgstr "ÙƒÙ„Ù…Ű© Ù…Ű±ÙˆŰ± Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… Ű§Ù„ŰŹŰ°Ű±"
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-#: ../../steps.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Install system"
-msgstr "ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ù†ŰžŰ§Ù…"
+msgid "Lilo/grub mode"
+msgstr "ÙˆŰ¶Űč Lilo/grub"
-#: ../../steps.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Choose packages to install"
-msgstr "ۧ۟ŰȘ۱ Ű§Ù„Ű­ŰČم Ű§Ù„ŰȘي ŰłŰȘÙŰ«ŰšÙ‘ÙŽŰȘ"
+msgid "Output"
+msgstr "Ű§Ù„Ù†Ű§ŰȘŰŹ"
-#: ../../steps.pm:1
+#: ../../loopback.pm:1
#, c-format
-msgid "Format partitions"
-msgstr "ŰȘŰŹÙ‡ÙŠŰČ Ű§Ù„ŰȘŰŹŰČۊۧŰȘ"
+msgid "Circular mounts %s\n"
+msgstr "Circular mounts %s\n"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Partitioning"
-msgstr "ŰȘŰŹŰČŰŠŰ© Ű§Ù„ŰŁÙ‚Ű±Ű§Ű”"
+msgid "Martinique"
+msgstr "Ù…Ű§Ű±ŰȘينيك"
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose your keyboard"
-msgstr "ۧ۟ŰȘ۱ Ù„ÙˆŰ­Ű© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­ Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙƒ"
+msgid "HardDrive / NFS"
+msgstr "HardDrive / NFS"
-#: ../../steps.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Select installation class"
-msgstr "ۧ۟ŰȘ۱ نوŰč Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ"
+msgid "a number"
+msgstr "Ű±Ù‚Ù…"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Hard drive detection"
-msgstr "Ű§Ù„ŰȘŰ­Ù‚Ù‚ من Ű§Ù„ŰŁÙ‚Ű±Ű§Ű” Ű§Ù„Ű”Ù„ŰšŰ©"
+msgid "Swedish"
+msgstr "Ű§Ù„ŰłÙˆÙŠŰŻÙŠŰ©"
-#: ../../steps.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Configure mouse"
-msgstr "Ű„Űčۯۧۯ Ű§Ù„ÙŰŁŰ±Ű©"
+msgid "Which %s driver should I try?"
+msgstr "ŰŁÙŠ Ù…ŰŽŰșل %s ÙŠŰŹŰš ŰŁÙ† ۧ۳ŰȘŰźŰŻÙ…Ù‡ŰŸ"
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "License"
-msgstr "Ű§Ù„ŰȘŰ±ŰźÙŠŰ”"
+msgid ""
+"You will receive an alert if one of the selected services is no longer "
+"running"
+msgstr "ŰłÙˆÙ ŰȘŰłŰȘلم ŰȘÙ†ŰšÙŠÙ‡Ű§Ù‹ ۄ۰ۧ ÙƒŰ§Ù†ŰȘ ŰŁŰ­ŰŻ Ű§Ù„ŰźŰŻÙ…Ű§ŰȘ Ű§Ù„Ù…ŰźŰȘۧ۱۩ ŰșÙŠŰ± ŰčŰ§Ù…Ù„Ű©."
-#: ../../steps.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Language"
-msgstr "ۧ۟ŰȘ۱ لŰșŰȘك"
+msgid "Filesystem types:"
+msgstr "ŰŁÙ†ÙˆŰ§Űč ŰŁÙ†ŰžÙ…Ű© Ű§Ù„Ù…Ù„ÙŰ§ŰȘ:"
-#: ../../ugtk2.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "utopia 25"
-msgstr "utopia 25"
+msgid ", multi-function device on HP JetDirect"
+msgstr ", ŰŹÙ‡Ű§ŰČ Ù…ŰȘŰčŰŻŰŻ Ű§Ù„ÙˆŰžŰ§ŰŠÙ Űčلى HP JetDirect"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "OK"
-msgstr "Ù…ÙˆŰ§ÙÙ‚"
+msgid "Northern Mariana Islands"
+msgstr "ŰŹŰČ۱ Ù…Ű§Ű±ÙŠŰ§Ù†Ű§ Ű§Ù„ŰŽÙ…Ű§Ù„ÙŠŰ©"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "logdrake"
-msgstr "logdrake"
+msgid "none"
+msgstr "Ù„Ű§ ŰŽŰŠ"
-#: ../../ugtk.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgid "user :"
+msgstr "Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… :"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (Ù…ŰŽŰșل Űč۱۶ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ)"
+msgid "Please enter your password"
+msgstr "۱ۏۧۥ ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ±"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
msgstr ""
-"يمكن Ù„ŰšŰ·Ű§Ù‚ŰȘك Ű§Ù„ŰȘمŰȘŰč ۚۯŰčم Ù„Ù„Ű±ŰłÙˆÙ… Ű«Ù„Ű§Ű«ÙŠŰ© Ű§Ù„ŰŁŰšŰčۧۯ مŰč XFree %s, \n"
-"Ù„Ű§Ű­Űž ŰŁÙ† Ù‡Ű°Ű§ Ű§Ù„ŰŻŰčم ŰȘŰŹŰ±ÙŠŰšÙŠ و Ù‚ŰŻ يŰȘ۳ۚۚ في Ű§ÙŠÙ‚Ű§Ù ŰŹÙ‡Ű§ŰČك."
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s مŰč ŰŻŰčم ŰȘŰŹŰ±ÙŠŰšÙŠ Ù„Ù„Ű±ŰłÙˆÙ… Ű«Ù„Ű§Ű«ÙŠŰ© Ű§Ù„ŰŁŰšŰčۧۯ"
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "يمكن Ù„ŰšŰ·Ű§Ù‚ŰȘك Ű§Ù„Ű­Ű”ÙˆÙ„ Űčلى ŰŻŰčم للŰȘŰłŰ±ÙŠŰč Ű«Ù„Ű§Ű«ÙŠ Ű§Ù„ŰŁŰšŰčۧۯ مŰč XFree %s"
+"Ù„Ű„ŰłÙ… Ű§Ù„ŰȘŰŽÙƒÙŠÙ„ Ű§Ù„Ű°ÙŠ ŰłŰȘŰčمله (Ű§Ù„ŰȘŰŽÙƒÙŠÙ„ Ű§Ù„ŰŹŰŻÙŠŰŻ يŰȘم Űčمله ÙƒÙ†ŰłŰźŰ© من Ű§Ù„ŰȘŰŽÙƒÙŠÙ„ Ű§Ù„Ű­Ű§Ù„ÙŠ) :"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s مŰč ŰȘŰłŰ±ÙŠŰč Ű«Ù„Ű§Ű«ÙŠ Ű§Ù„ŰŁŰšŰčۧۯ"
+msgid "Floppy"
+msgstr "Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…Ű±Ù†"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+msgid "Please check if you want to erase your RW media (1st Session)"
msgstr ""
-"يمكن Ù„ŰšŰ·Ű§Ù‚ŰȘك Ű§Ù„ŰȘمŰȘŰč ۚۯŰčم للŰȘŰłŰ±ÙŠŰč Ű«Ù„Ű§Ű«ÙŠ Ű§Ù„ŰŁŰšŰčۧۯ لكن ÙÙ‚Ű· مŰč XFree %s, \n"
-"Ù„Ű§Ű­Űž ŰŁÙ† Ù‡Ű°Ű§ Ű§Ù„ŰŻŰčم ŰȘŰŹŰ±ÙŠŰšÙŠ و Ù‚ŰŻ يŰȘ۳ۚۚ في Ű§ÙŠÙ‚Ű§Ù ŰŹÙ‡Ű§ŰČك.\n"
-"ŰšŰ·Ű§Ù‚ŰȘك Ù…ŰŻŰčÙˆÙ…Ű© Űčن Ű·Ű±ÙŠÙ‚ XFree %s Ű§Ù„ŰȘي يمكن ŰŁÙ† ŰȘكون Ù…ŰŻŰčÙˆÙ…Ű© ŰšŰŽÙƒÙ„ ŰŁÙŰ¶Ù„ في ÙˆŰ¶ŰčÙŠŰ© "
-"Ű§Ù„Ű±ŰłÙˆÙ… Ű«Ù†Ű§ŰŠÙŠŰ© Ű§Ù„ŰŁŰšŰčۧۯ."
+"ÙŰ¶Ù„Ű§ قم ŰšŰ§Ù„ŰȘŰŁŰŽÙŠŰ± Ù‡Ù†Ű§ ۧ۰ۧ كنŰȘ ŰȘŰ±ÙŠŰŻ Ù…ŰłŰ­ Ű§Ù„ÙˆŰłÙŠŰ· Ű§Ù„Ù‚Ű§ŰšÙ„ Ù„Ű„Űčۧۯ۩ Ű§Ù„ÙƒŰȘۧۚ۩ (Ű§Ù„ŰŹÙ„ŰłŰ© "
+"Ű§Ù„ŰŁÙˆÙ„Ù‰)"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"يمكن Ù„ŰšŰ·Ű§Ù‚ŰȘك Ű§Ù„Ű­Ű”ÙˆÙ„ Űčلى ŰŻŰčم للŰȘŰłŰ±ÙŠŰč Ű«Ù„Ű§Ű«ÙŠ Ű§Ù„ŰŁŰšŰčۧۯ لكن ÙÙ‚Ű· مŰč XFree %s.\n"
-"ŰšŰ·Ű§Ù‚ŰȘك Ù…ŰŻŰčÙˆÙ…Ű© Űčن Ű·Ű±ÙŠÙ‚ XFree %s Ű§Ù„ŰȘي يمكن ŰŁÙ† ŰȘكون Ù…ŰŻŰčÙˆÙ…Ű© ŰšŰŽÙ„ ŰŁÙŰ¶Ù„ في Ű§Ù„ÙˆŰ¶Űč "
-"Ű«Ù†Ű§ŰŠÙŠ Ű§Ù„ŰŁŰšŰčۧۯ."
+msgid "Ghostscript referencing"
+msgstr "Ghostscript referencing"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
+msgid "Bootloader"
+msgstr "Ù…Ű­Ù…Ù‘Ù„ Ű§Ù„Ű„Ù‚Ù„Ű§Űč"
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "قم ۚۄŰčۯۧۯ Ű§Ù„ŰšŰ·Ű§Ù‚Ű© \"%s\"%s ÙÙ‚Ű·"
+msgid "Move"
+msgstr "نقل"
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Use Xinerama extension"
-msgstr "ۧ۳ŰȘŰźŰŻŰ§Ù… Ű§Ù…ŰȘۯۧۯ Xinerama"
+msgid "Bootloader to use"
+msgstr "Ù…Ű­Ù…Ù‘Ù„ Ű§Ù„Ű„Ù‚Ù„Ű§Űč Ű§Ù„Ù…ÙŰłŰȘŰźŰŻÙ…"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configure all heads independently"
-msgstr "ۧŰčۯۧۯ كل Ű§Ù„Ű±Ű€ÙˆŰł ŰšŰŽÙƒÙ„ Ù…ŰłŰȘقل"
+msgid "SMB server host"
+msgstr "Ù…ŰłŰȘŰ¶ÙŠÙ ŰźŰ§ŰŻÙ… SMB"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "ŰŁÙŠ ۧŰčۯۧۯ لـXFree ŰȘŰ±ÙŠŰŻŰŸ"
+msgid "Name Servers:"
+msgstr "ŰźŰ§ŰŻÙ…Ű§ŰȘ Ű§Ù„Ű„ŰłÙ…:"
-#: ../../Xconfig/card.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "XFree configuration"
-msgstr "Ű„Űčۯۧۯ XFree"
+msgid ""
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Ű„ŰźŰȘ۱ Ű­ŰŹÙ… Ű°Ű§ÙƒŰ±Ű© ŰšŰ·Ű§Ù‚Ű© Ű§Ù„ŰŽŰ§ŰŽŰ©"
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Ű§Ű­Ű°Ù Ù‡Ű°Ù‡ Ű§Ù„Ű·Ű§ŰšŰčŰ© من Star Office/OpenOffice.org/GIMP"
-#: ../../Xconfig/card.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
msgstr ""
-"Ù†ŰžŰ§Ù…Ùƒ ÙŠŰŻŰčم Ű§Ù„Ű„Űčۯۧۯ مŰȘŰčŰŻŰŻ Ű§Ù„Ű±Ű€ÙˆŰł.\n"
-"Ù…Ű§Ű°Ű§ ŰȘŰ±ÙŠŰŻ ŰŁÙ† ŰȘفŰčÙ„ŰŸ"
+"Linux Virtual Server, ÙŠŰłŰȘŰźŰŻÙ… لŰčمل ŰźŰ§ŰŻÙ… ŰčŰ§Ù„ÙŠ Ű§Ù„ŰŁŰŻŰ§ŰĄ\n"
+"و يŰčŰȘÙ…ŰŻ Űčليه."
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Multi-head configuration"
-msgstr "Ű„Űčۯۧۯ مŰȘŰčŰŻŰŻ Ű§Ù„Ű±Ű€ÙˆŰł"
+msgid "4 billion colors (32 bits)"
+msgstr "4 ŰšÙ„ÙŠÙˆÙ† لون (32 ŰšŰȘ)"
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose an X server"
-msgstr "Ű„ŰźŰȘ۱ ŰźŰ§ŰŻÙ… X"
+msgid "Micronesia"
+msgstr "Ù…ÙŠÙƒŰ±ÙˆÙ†ÙŠŰČÙŠŰ§"
-#: ../../Xconfig/card.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "X server"
-msgstr "ŰźŰ§ŰŻÙ… X"
+msgid "License"
+msgstr "Ű§Ù„ŰȘŰ±ŰźÙŠŰ”"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "64 MB or more"
-msgstr "64 ميŰșŰ§ŰšŰ§ÙŠŰȘ ŰŁÙˆ ŰŁÙƒŰ«Ű±"
+msgid "This may take a moment to generate the keys."
+msgstr "Ù‚ŰŻ ÙŠŰłŰȘŰșŰ±Ù‚ Ù‡Ű°Ű§ ŰšŰč۶ Ű§Ù„ÙˆÙ‚ŰȘ لŰȘÙˆÙ„ÙŠŰŻ Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­."
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "32 MB"
-msgstr "32 ميŰșŰ§ŰšŰ§ÙŠŰȘ"
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgstr "Ű§Ù„ŰȘŰ­Ù‚Ù‚ Ű§Ù„ŰąÙ„ÙŠ من Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ (Ù…Ű­Ù„ÙŠŰ©, TCP/Socket, و SMB)"
-#: ../../Xconfig/card.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "16 MB"
-msgstr "16 ميŰșŰ§ŰšŰ§ÙŠŰȘ"
+msgid "Sagem (using pppoa) usb"
+msgstr "Sagem (using pppoa) usb"
-#: ../../Xconfig/card.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "8 MB"
-msgstr "8 ميŰșŰ§ŰšŰ§ÙŠŰȘ"
+msgid ""
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
+msgstr ""
+"Ù„Ù‚ŰŻ ŰžÙ‡Ű± ۟۷ۣ - لم يŰȘم Ű§ÙŠŰŹŰ§ŰŻ ŰŁŰŹÙ‡ŰČŰ© Ű”Ű§Ù„Ű­Ű© يمكن Ű§Ù†ŰŽŰ§ŰĄ ŰŁÙ†ŰžÙ…Ű© Ù…Ù„ÙŰ§ŰȘ ŰŹŰŻÙŠŰŻŰ©. ŰȘŰŁÙƒŰŻ من "
+"Ű§Ù„ŰčŰȘۧۯ Ű§Ù„ŰźŰ§Ű” ŰšÙƒ لمŰčŰ±ÙŰ© ێۚۚ Ù‡Ű°Ù‡ Ű§Ù„Ù…ŰŽÙƒÙ„Ű©"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "4 MB"
-msgstr "4 ميŰșŰ§ŰšŰ§ÙŠŰȘ"
+msgid "Starting the printing system at boot time"
+msgstr "ۚۯۥ Ù†ŰžŰ§Ù… Ű§Ù„Ű·ŰšŰ§ŰčŰ© ŰčÙ†ŰŻ Ű§Ù„Ű„Ù‚Ù„Ű§Űč"
-#: ../../Xconfig/card.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "2 MB"
-msgstr "2 ميŰșŰ§ŰšŰ§ÙŠŰȘ"
+msgid "Do you want to start the connection at boot?"
+msgstr "هل ŰȘŰ±ÙŠŰŻ ۚۯۥ Ű§Ù„ÙˆŰ”Ù„Ű© ŰčÙ†ŰŻ Ű§Ù„Ű„Ù‚Ù„Ű§Űč۟"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "1 MB"
-msgstr "1 ميŰșŰ§ŰšŰ§ÙŠŰȘ"
+msgid "Processor ID"
+msgstr "Ù‡ÙˆÙŠŰ© Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ"
-#: ../../Xconfig/card.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "512 kB"
-msgstr "512 ÙƒÙŠÙ„ÙˆŰšŰ§ÙŠŰȘ"
+msgid "Sound trouble shooting"
+msgstr "Ű­Ù„ Ù…ŰŽŰ§ÙƒÙ„ Ű§Ù„Ű”ÙˆŰȘ"
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "256 kB"
-msgstr "256 ÙƒÙŠÙ„ÙˆŰšŰ§ÙŠŰȘ"
+msgid "Polish (qwerty layout)"
+msgstr "Ű§Ù„ŰšÙˆÙ„Ù†ŰŻÙŠŰ© (qwerty layout)"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "activate now"
+msgstr "قم ŰšŰ§Ù„ŰȘÙ†ŰŽÙŠŰ· Ű§Ù„ŰąÙ†"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
"\n"
-"%s"
+"Drakbackup activities via CD:\n"
+"\n"
msgstr ""
-"هل ŰȘŰ±ÙŠŰŻ Ű­ÙŰž Ű§Ù„ŰȘŰșÙŠÙŠŰ±Ű§ŰȘ۟\n"
-"Ű§Ù„Ű„Űčۯۧۯ Ű§Ù„Ű­Ű§Ù„ÙŠ هو:\n"
"\n"
-"%s"
+"Ù†ŰŽŰ§Ű·Ű§ŰȘ Drakbackup Űčن Ű·Ű±ÙŠÙ‚ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹ:\n"
+"\n"
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Options"
-msgstr "ŰźÙŠŰ§Ű±Ű§ŰȘ"
+msgid ""
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
+msgstr ""
+"ŰŁÙ†ŰȘ Űčلى ÙˆŰŽÙƒ ŰȘŰ«ŰšÙŠŰȘ Ù†ŰžŰ§Ù… Ű§Ù„Ű·ŰšŰ§ŰčŰ© %s Űčلى Ù†ŰžŰ§Ù… يŰčمل Űčلى Ű§Ù„Ù…ŰłŰȘوى Ű§Ù„ŰŁÙ…Ù†ÙŠ %s.\n"
+"Ù†ŰžŰ§Ù… Ű§Ù„Ű·ŰšŰ§ŰčŰ© ÙŠŰŽŰșّل Ù…Ű±Ű§Ù‚Űš (ŰčÙ…Ù„ÙŠŰ© ŰźÙ„ÙÙŠŰ©) يقوم ŰšŰ§Ù†ŰȘ۞ۧ۱ ÙˆŰžŰ§ŰŠÙ Ű§Ù„Ű·ŰšŰ§ŰčŰ© و يŰȘŰčŰ§Ù…Ù„ "
+"مŰčÙ‡Ű§. Ù‡Ű°Ű§ Ű§Ù„Ù…Ű±Ű§Ù‚Űš يمكن Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„ÙŠÙ‡ Űčن من Ù‚ÙŰšÙ„ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű§ŰȘ Ű§Ù„ŰšŰčÙŠŰŻŰ© Űčلى Ű§Ù„ŰŽŰšÙƒŰ© و "
+"Ù„Ű°Ű§ ÙÙ‚ŰŻ يمكن ŰŁÙ† يكون Ù†Ù‚Ű·Ű© Ù…ŰšŰŻŰŠÙŠŰ© Ù„Ù‡ŰŹÙ…Ű§ŰȘ Ű§Ù„Ù…ŰźŰȘŰ±Ù‚ÙŠÙ†. Ù„Ù‡Ű°Ű§ يŰȘم ۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„Ù‚Ù„ÙŠÙ„ من "
+"Ű§Ù„Ù…Ű±Ű§Ù‚ŰšŰ§ŰȘ لŰȘŰŽŰșÙŠÙ„Ù‡Ű§ Ű§ÙŰȘŰ±Ű§Ű¶ÙŠŰ§Ù‹ Űčلى Ù‡Ű°Ű§ Ű§Ù„Ù…ŰłŰȘوى Ű§Ù„ŰŁÙ…Ù†ÙŠ.\n"
+"\n"
+"هل ŰȘŰ±ÙŠŰŻ فŰčÙ„Ű§Ù‹ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Ű·ŰšŰ§ŰčŰ© Űčلى Ù‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű©ŰŸ"
-#: ../../Xconfig/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Test"
-msgstr "ۧ۟ŰȘۚۧ۱"
+msgid "Host \"%s\", port %s"
+msgstr "Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ \"%s\", Ű§Ù„Ù…Ù†ÙŰ° %s"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Resolution"
-msgstr "ŰŻÙ‚Ű© Ű§Ù„Űč۱۶"
+msgid "This partition can't be used for loopback"
+msgstr "Ù‡Ű°Ù‡ Ű§Ù„ŰȘŰŹŰČŰŠŰ© Ù„Ű§ يمكن ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡Ű§ لـloopback"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Monitor"
-msgstr "Ű§Ù„ŰŽŰ§ŰŽŰ©"
+msgid "File already exists. Use it?"
+msgstr "Ű§Ù„Ù…Ù„Ù Ù…ÙˆŰŹÙˆŰŻ Ù…ŰłŰšÙ‚Ű§, هل ŰȘŰ±ÙŠŰŻ ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡ŰŸ"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Graphic Card"
-msgstr "ŰšŰ·Ű§Ù‚Ű© Ű§Ù„ŰŽŰ§ŰŽŰ©"
+msgid "received: "
+msgstr "Ù…ÙŰłŰȘÙ‚ŰšÙ„: "
-#: ../../Xconfig/monitor.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Vertical refresh rate"
-msgstr "Ù†ŰłŰšŰ© Ű§Ù„Ű„Ù†Űčۧێ Ű§Ù„Ű±ŰŁŰłÙŠ"
+msgid "Right Alt key"
+msgstr "مفŰȘۭۧ Alt Ű§Ù„ŰŁÙŠÙ…Ù†"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Ù†ŰłŰšŰ© Ű§Ù„Ű„Ù†Űčۧێ Ű§Ù„ŰŁÙÙ‚ÙŠ"
+msgid "the list of alternative drivers for this sound card"
+msgstr "Ù‚Ű§ŰŠÙ…Ű© Ű§Ù„Ù…ŰŽŰșÙ„Ű§ŰȘ Ű§Ù„ŰšŰŻÙŠÙ„Ű© Ù„ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű”ÙˆŰȘ"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Ű§Ù„Ù…ŰčŰ§Ù…Ù„Ű§Ù† Ű§Ù„Ù…Ù‡Ù…Ű§Ù† ۏۯۧ Ù‡Ù…Ű§ Ù†ŰłŰšŰ© Ű§Ù„Ű„Ù†Űčۧێ Ű§Ù„ŰŁÙÙ‚ÙŠ, و هي Ű§Ù„Ù†ŰłŰšŰ© Ű§Ù„ŰȘي\n"
-"يŰȘم ÙÙŠÙ‡Ű§ Ű§Ù†Űčۧێ Ű§Ù„ŰŽŰ§ŰŽŰ© ÙƒŰ§Ù…Ù„Ű©, و Ű§Ù„ŰŁÙ‡Ù… هو Ù†ŰłŰšŰ© Ű§Ù„ŰȘŰČŰ§Ù…Ù† Ű§Ù„ŰŁÙÙ‚ÙŠ\n"
-"و Ű§Ù„ŰȘي في ŰźÙ„Ű§Ù„Ù‡Ű§ يŰȘم Űč۱۶ ŰźŰ·ÙˆŰ· Ű§Ù„Ù…ŰłŰ­.\n"
-"\n"
-"من *Ű§Ù„Ù…Ù‡Ù… ۏۯۧ* ŰŁÙ† Ù„Ű§ ŰȘŰ­ŰŻŰŻ نوŰč ێۧێ۩ مŰč مŰȘÙˆŰłŰ· ŰȘŰČŰ§Ù…Ù†\n"
-"ŰŁÙƒŰšŰ± من Ù…Ù‚ŰŻŰ±Ű© ێۧێŰȘك Ù„ŰŁÙ†Ùƒ ŰšÙ‡Ű°Ű§ Ù‚ŰŻ ŰȘŰŻÙ…Ű± ێۧێŰȘك.\n"
-" ۧ۰ۧ لم ŰȘكن مŰȘŰŁÙƒŰŻŰ§ يمكنك ۧ۟ŰȘÙŠŰ§Ű± ۧŰčۯۧۯۧŰȘ ŰčŰ§ŰŻÙŠŰ©."
+msgid "Gateway"
+msgstr "Gateway"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr "ŰȘŰč۰۱ Ű§Ù„ŰȘŰŁÙƒŰŻ من ÙˆŰŹÙˆŰŻ Plug 'n Play. ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ Ű§Ù„ŰŽŰ§ŰŽŰ© Ű§Ù„Ű”Ű­ÙŠŰ­Ű©"
+msgid "Scanner sharing"
+msgstr "Ù…ŰŽŰ§Ű±ÙƒŰ© Ű§Ù„Ù…Ű§ŰłŰ­Ű§ŰȘ Ű§Ù„Ű¶ÙˆŰŠÙŠŰ©"
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Vendor"
-msgstr "Ű§Ù„Ù…Ű”Ù†Űč"
+msgid "Tonga"
+msgstr "ŰȘÙˆÙ†ŰŹÙˆ"
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Plug'n Play"
-msgstr "Plug'n Play"
+msgid "Tunisia"
+msgstr "ŰȘÙˆÙ†Űł"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose a monitor"
-msgstr "Ű„ŰźŰȘ۱ ێۧێ۩"
+msgid "Profile: "
+msgstr "Ű§Ù„ŰȘŰŽÙƒÙŠÙ„:"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Graphics card: %s"
-msgstr "ŰšŰ·Ű§Ù‚Ű© Ű§Ù„ŰŽŰ§ŰŽŰ©: %s"
+msgid ""
+"Click on a device in the left tree in order to display its information here."
+msgstr "Ű§Ù†Ù‚Ű± Űčلى ŰŹÙ‡Ű§ŰČ ÙÙŠ Ű§Ù„ŰłÙ„ŰłÙ„Ű© Ű§Ù„ÙŠŰłŰ±Ù‰ لŰč۱۶ مŰčÙ„ÙˆÙ…Ű§ŰȘه Ù‡Ù†Ű§."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "ۧ۟ŰȘ۱ ŰŻÙ‚Ű© Ű§Ù„Űč۱۶ و Űčمق Ű§Ù„ŰŁÙ„ÙˆŰ§Ù…"
+msgid "XawTV isn't installed!"
+msgstr "XawTV ŰșÙŠŰ± Ù…Ű«ŰšŰȘ!"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Resolutions"
-msgstr "ŰŻÙ‚Ű© Ű§Ù„Űč۱۶"
+msgid ""
+"Create/Transfer\n"
+"backup keys for SSH"
+msgstr ""
+"Ű§Ù†ŰŽŰŠ/لنقل\n"
+"Ù…ÙŰ§ŰȘÙŠŰ­ Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ لـSSH"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 ŰšÙ„ÙŠÙˆÙ† لون (32 ŰšŰȘ)"
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr "Ù„Ű§ ŰȘÙŰ¶Ù…Ù‘Ù† Ű§Ù„Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ù…Ù‡Ù…Ű© (passws, group,fstab)"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 مليون لون (24 ŰšŰȘ)"
+msgid "old static device name used in dev package"
+msgstr "Ű§ŰłÙ… Ű§Ù„ŰŹÙ‡Ű§ŰČ Ű§Ù„Ù‚ŰŻÙŠÙ… Ű§Ù„ŰłŰ§ÙƒÙ† Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… في Ű­ŰČÙ…Ű© dev"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 ŰŁÙ„Ù لون (16 ŰšŰȘ)"
+msgid "This label is already used"
+msgstr "Ù‡Ű°Ù‡ Ű§Ù„ŰčÙ„Ű§Ù…Ű© Ù…ŰłŰȘŰźŰŻÙ…Ű© Ù…ŰłŰšÙ‚Ű§"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 ŰŁÙ„Ù لون (15 ŰšŰȘ)"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"ŰŁÙ‡Ù„Ű§Ù‹ ŰšÙƒÙ… في مŰčŰ§Ù„ŰŹ ۧŰčۯۧۯ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ\n"
+"Ù‡Ű°Ű§ Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ ŰłÙŠŰłŰ§ŰčŰŻÙƒ Űčلى ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ű·Ű§ŰšŰčŰ©/Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…ÙˆŰ”ÙˆÙ„Ű© ŰšÙ‡Ű°Ű§ Ű§Ù„ÙƒÙ…ŰšÙŠÙˆŰȘ۱ ŰŁÙˆ "
+"Ű§Ù„Ù…ÙˆŰ”ÙˆÙ„Ű© Ù…ŰšŰ§ŰŽŰ±Ű©Ù‹ ŰšŰ§Ù„ŰŽŰšÙƒŰ©.\n"
+"\n"
+"ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ù„ŰŻÙŠÙƒ ۷ۧۚŰčŰ©/۷ۧۚŰčۧŰȘ Ù…ÙˆŰ”ÙˆÙ„Ű© ŰšÙ‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű©, ÙŰ¶Ù„Ű§Ù‹ قم ŰšŰȘÙˆŰ”ÙŠÙ„Ù‡Ű§ Ű§Ù„Ù‰ Ù‡Ű°Ű§ "
+"Ű§Ù„ÙƒÙ…ŰšÙŠÙˆŰȘ۱ و قم ŰšŰȘŰŽŰșÙŠÙ„Ù‡Ű§ كي يŰȘم Ű§Ù„ŰȘŰ­Ù‚Ù‚ Ù…Ù†Ù‡Ű§/منهم ŰąÙ„ÙŠŰ§Ù‹. ŰŁÙŠŰ¶Ű§Ù‹ ÙŠŰŹŰš ŰŁÙ† ŰȘكون ۷ۧۚŰčŰ©/"
+"۷ۧۚŰčۧŰȘ Ű§Ù„ŰŽŰšÙƒŰ© Ù…ÙˆŰ”ÙˆÙ„Ű© و Ù…ŰŽŰșÙ‘Ù„Ű©.\n"
+"\n"
+"Ù„Ű§Ű­Űž ŰŁÙ† Ű§Ù„ŰȘŰ­Ù‚Ù‚ Ű§Ù„ŰąÙ„ÙŠ من Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Űčلى Ű§Ù„ŰŽŰšÙƒŰ© Ù‚ŰŻ ÙŠŰłŰȘŰșŰ±Ù‚ وقŰȘŰ§Ù‹ ŰŁŰ·ÙˆÙ„ من Ű§Ù„ŰȘŰ­Ù‚Ù‚ "
+"Ű§Ù„ŰąÙ„ÙŠ من Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…ÙˆŰ”ÙˆÙ„Ű© ŰšÙ‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű© ÙÙ‚Ű·. Ù„Ű°Ű§ قم ŰšŰȘŰčŰ·ÙŠÙ„ Ű§Ù„ŰȘŰ­Ù‚Ù‚ Ű§Ù„ŰąÙ„ÙŠ من "
+"۷ۧۚŰčۧŰȘ Ű§Ù„ŰŽŰšÙƒŰ© ۧ۰ۧ لم ŰȘكن ŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ Ù‡Ű°Ù‡ Ű§Ù„Ù…ÙŠŰČŰ©.\n"
+"\n"
+" Ű§Ù†Ù‚Ű± \"Ű§Ù„ŰȘŰ§Ù„ÙŠ\" ŰčÙ†ŰŻÙ…Ű§ ŰȘكون Ù…ŰłŰȘŰčŰŻŰ§Ù‹, و Űčلى \"Ű§Ù„Űșۧۥ\" ۧ۰ۧ لم ŰȘكن ŰȘŰ±ÙŠŰŻ ۧŰčۯۧۯ "
+"Ű§Ù„Ű·Ű§ŰšŰčŰ©/Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„ŰąÙ†."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 لون (8 ŰšŰȘ)"
+msgid "After formatting partition %s, all data on this partition will be lost"
+msgstr "ŰšŰčŰŻ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰȘÙ‚ŰłÙŠÙ… %s, ÙŰ„Ù† كل Ű§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„Ù…ÙˆŰŹÙˆŰŻŰ© Űčلى Ű§Ù„ŰȘŰŹŰČŰŠŰ© ŰłŰȘÙÙ‚ŰŻ"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Is this the correct setting?"
-msgstr "هل Ù‡Ű°Ű§ هو Ű§Ù„Ű„Űčۯۧۯ Ű§Ù„Ű”Ű­ÙŠŰ­ŰŸ"
+msgid "Connection Time: "
+msgstr "وقŰȘ Ű§Ù„Ű„ŰȘŰ”Ű§Ù„:"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Leaving in %d seconds"
-msgstr "ŰłŰȘŰȘم Ű§Ù„Ù…Űșۧۯ۱۩ في %d Ű«ÙˆŰ§Ù†"
+msgid "select perm file to see/edit"
+msgstr "ۧ۟ŰȘ۱ ملف ŰȘŰ”Ű§Ű±ÙŠŰ­ Ù„Ű±Ű€ÙŠŰȘه/ŰȘŰ­Ű±ÙŠŰ±Ù‡"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/livedrake:1
#, c-format
msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
-"ŰžÙ‡Ű± ۟۷ۣ:\n"
-"%s\n"
-"Ű­Ű§ÙˆÙ„ ŰȘŰșÙŠÙŠŰ± ŰšŰč۶ Ű§Ù„Ù…ŰčŰ§Ù…Ù„Ű§ŰȘ"
-
-#: ../../Xconfig/test.pm:1
-#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "ŰȘŰ­Ű°ÙŠŰ±: ۧ۟ŰȘۚۧ۱ ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Űč۱۶ Ù‡Ű°Ù‡ Ù‚ŰŻ يŰȘ۳ۚ في Ű§ÙŠÙ‚Ű§Ù ŰŹÙ‡Ű§ŰČك"
+"ÙŰ¶Ù„Ű§ ŰŁŰŻŰźÙ„ Ù‚Ű±Ű” Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ في ŰłÙˆŰ§Ù‚ŰȘك و ۧ۶ŰșŰ· Ù…ÙˆŰ§ÙÙ‚ ŰčÙ†ŰŻÙ…Ű§ ŰȘنŰȘهي.\n"
+"ۄ۰ۧ لم يكن Ù‚Ű±Ű” Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ Ù„ŰŻÙŠÙƒ ۧ۶ŰșŰ· Ű§Ù„Űșۧۥ Ù„Ù„Ű„Ù…ŰȘÙ†Ű§Űč Űčن Ű§Ù„ŰȘŰ­ŰŻÙŠŰ« Ű§Ù„Ű­ÙŠ."
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "هل ŰȘŰ±ÙŠŰŻ ŰȘۏ۱ۚ۩ Ű§Ù„Ű„Űčۯۧۯ۟"
+msgid "Use group id for execution"
+msgstr "ۧ۳ŰȘŰźŰŻÙ… group id للŰȘÙ†ÙÙŠŰ°"
-#: ../../Xconfig/test.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Test of the configuration"
-msgstr "ۧ۟ŰȘۚۧ۱ Ű§Ù„Ű„Űčۯۧۯ"
+msgid "Choose the default user:"
+msgstr "ۧ۟ŰȘ۱ Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… Ű§Ù„Ű§ÙŰȘŰ±Ű§Ű¶ÙŠ:"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "What norm is your TV using?"
-msgstr "ŰŁÙŠ Ù†ŰžŰ§Ù… ÙŠŰłŰȘŰźŰŻÙ…Ù‡ ŰŹÙ‡Ű§ŰČ Ű§Ù„ŰȘÙ„ÙŰ§ŰČ Ù„ŰŻÙŠÙƒŰŸ"
+msgid "Gabon"
+msgstr "Ű§Ù„ŰșŰ§ŰšÙˆÙ†"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
-"Do you have this feature?"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
msgstr ""
-"ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű±ŰłÙˆÙ… Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙƒ ÙŠŰšŰŻÙˆ ŰŁÙ†Ù‡Ű§ ŰȘŰ­ŰȘوي Űčلى Ù…ÙˆŰ”Ù„ للŰȘÙ„ÙŰ§ŰČ.\n"
-"يمكن ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰšŰ·Ű§Ù‚Ű© للŰčمل ۚۧ۳ŰȘŰźŰŻŰ§Ù… Ű§Ù„Ù€ frame-buffer.\n"
-"\n"
-"Ù„Ù‡Ű°Ű§ Ű§Ù„Űș۱۶ ÙŠŰŹŰš Űčليك ŰȘÙˆŰ”ÙŠÙ„ ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű±ŰłÙˆÙ… ŰšŰ§Ù„ŰȘÙ„ÙŰ§ŰČ Ù‚ŰšÙ„ ۚۯۥ ŰȘŰŽŰșيل Ű§Ù„ÙƒÙ…ŰšÙŠÙˆŰȘ۱.\n"
-"Ű«Ù… ۧ۟ŰȘ۱ \"TVout\" من Ù…Ű­Ù…Ù‘Ù„ Ű§Ù„Ű„Ù‚Ù„Ű§Űč\n"
"\n"
-"هل Ù„ŰŻÙŠÙƒ Ù‡Ű°Ù‡ Ű§Ù„Ù…ÙŠŰČŰ©ŰŸ"
+"Ù„Ű§ ŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Űčلى ŰźŰ§ŰŻÙ…Ű§ŰȘ CUPS Ű§Ù„ŰšŰčÙŠŰŻŰ©; Ù‡Ű°Ù‡ Ű§Ù„ÙƒŰ§ŰšŰčۧŰȘ يمكن "
+"Ű§ÙƒŰȘŰŽÙ„ÙÙ‡Ű§ ŰąÙ„ÙŠŰ§Ù‹."
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
msgstr ""
-"يمكنني ŰŹŰčل ŰŹÙ‡Ű§ŰČك ÙŠŰšŰŻŰŁ X ŰšŰŽÙƒÙ„ ŰąÙ„ÙŠ ŰšŰčŰŻ Ű§Ù„Ű„Ù‚Ù„Ű§Űč.\n"
-"هل ŰȘŰ±ÙŠŰŻ X ŰŁÙ† ŰšÙŠŰŻŰŁ ŰšŰčŰŻ Ű„Űčۧۯ۩ ŰȘŰŽŰșيل ŰŹÙ‡Ű§ŰČÙƒŰŸ"
-
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "ÙˆŰ§ŰŹÙ‡Ű© Ű±ŰłÙˆÙ…ÙŠŰ© ŰčÙ†ŰŻ ۚۯۥ Ű§Ù„ŰȘŰŽŰșيل"
+"ÙŠŰŻŰčم Mandrake Linux Ű§Ù„ŰčŰŻÙŠŰŻ من Ű§Ù„Ù„ŰșۧŰȘ. ۧ۟ŰȘ۱\n"
+"Ű§Ù„Ù„ŰșۧŰȘ Ű§Ù„ŰȘي ŰȘŰ±ÙŠŰŻ ŰȘŰ«ŰšÙŠŰȘÙ‡Ű§. ŰłŰȘكون Ù‡Ű°Ù‡ مŰȘÙˆÙŰ±Ű©Ù‹ ŰčÙ†ŰŻ\n"
+"Ű§ÙƒŰȘÙ…Ű§Ù„ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ و ۧŰčۯۧ۩ ŰȘŰŽŰșيل Ű§Ù„Ù†ŰžŰ§Ù…."
-#: ../../Xconfig/various.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Ù…ŰŽŰșل XFree86: %s\n"
+msgid "Domain"
+msgstr "Ű§Ù„Ù†Ű·Ű§Ù‚"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "ŰźŰ§ŰŻÙ… XFree86: %s\n"
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "Ű­ŰŹÙ… Ű§Ù„Ű°Ű§ÙƒŰ±Ű© Ű§Ù„ŰŻÙ‚ÙŠÙ‚ ŰčÙ†ŰŻ Ű§Ù„Ű­Ű§ŰŹŰ© )ŰȘم Ű§ÙŠŰŹŰ§ŰŻ %d ميŰșŰ§ŰšŰ§ÙŠŰȘ("
-#: ../../Xconfig/various.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Resolution: %s\n"
-msgstr "ŰŻÙ‚Ű© Ű§Ù„Űč۱۶: %s\n"
+msgid ""
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
+"\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
+"\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
+msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Color depth: %s\n"
-msgstr "Űčمق Ű§Ù„ŰŁÙ„ÙˆŰ§Ù†: %s\n"
+msgid "Provider dns 2 (optional)"
+msgstr "DNS Ű§Ù„Ű«Ű§Ù†ÙŠ Ù„Ù„Ù…ÙˆÙŰ± (ۧ۟ŰȘÙŠŰ§Ű±ÙŠ)"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Ű°Ű§ÙƒŰ±Ű© ŰšŰ·Ű§Ù‚Ű© Ű§Ù„ŰŽŰ§ŰŽŰ©: %s ÙƒÙŠÙ„ÙˆŰšŰ§ÙŠŰȘ\n"
+msgid "Boot device"
+msgstr "ŰŹÙ‡Ű§ŰČ Ű§Ù„Ű„Ù‚Ù„Ű§Űč"
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Graphics card: %s\n"
-msgstr "ŰšŰ·Ű§Ù‚Ű© Ű§Ù„ŰŽŰ§ŰŽŰ©: %s\n"
+msgid "Which partition do you want to resize?"
+msgstr "ŰŁÙŠ ŰȘŰŹŰČŰŠŰ© ŰȘŰ±ÙŠŰŻ ŰȘŰșÙŠÙŠŰ± Ű­ŰŹÙ…Ù‡Ű§ŰŸ"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Ű§Ù†Űčۧێ Ű§Ù„ŰŽŰ§ŰŽŰ© Ű§Ù„Ű±ŰŁŰłÙŠ: %s\n"
+msgid "United States Minor Outlying Islands"
+msgstr "ŰŹŰČ۱ Ű§Ù„ÙˆÙ„Ű§ÙŠŰ§ŰȘ Ű§Ù„Ù…ŰȘŰ­ŰŻŰ©"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "ŰȘŰČŰ§Ù…Ù† Ű§Ù„ŰŽŰ§ŰŽŰ© Ű§Ù„ŰŁÙÙ‚ÙŠ: %s\n"
+msgid "A tool to monitor your logs"
+msgstr "ۣۯۧ۩ Ù„Ù…Ű±Ű§Ù‚ŰšŰ© ŰłŰŹÙ„Ű§ŰȘ Ù†ŰžŰ§Ù…Ùƒ"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor: %s\n"
-msgstr "Ű§Ù„ŰŽŰ§ŰŽŰ©: %s\n"
+msgid "Djibouti"
+msgstr "ŰŹÙŠŰšÙˆŰȘي"
-#: ../../Xconfig/various.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Mouse device: %s\n"
-msgstr "ŰŹÙ‡Ű§ŰČ Ű§Ù„ÙŰŁŰ±Ű©: %s\n"
+msgid "detected on port %s"
+msgstr "ŰȘم Ű§ÙƒŰȘŰŽŰ§ÙÙ‡ Űčلى Ű§Ù„Ù…Ù†ÙŰ° %s"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Mouse type: %s\n"
-msgstr "نوŰč Ű§Ù„ÙŰŁŰ±Ű©: %s\n"
+msgid "LPD"
+msgstr "LPD"
#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Ù„ÙˆŰ­Ű© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­: %s\n"
+msgid "Graphics card: %s\n"
+msgstr "ŰšŰ·Ű§Ù‚Ű© Ű§Ù„ŰŽŰ§ŰŽŰ©: %s\n"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Options: %s"
-msgstr "Ű§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ: %s"
+msgid "Yaboot"
+msgstr "Yaboot"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mount point: "
-msgstr "Ù†Ù‚Ű·Ű© Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„: "
+msgid "Please check if you are using a DVDRAM device"
+msgstr "ÙŰ¶Ù„Ű§ قم ŰšŰ§Ù„ŰȘŰŁŰŽÙŠŰ± Ù‡Ù†Ű§ ۧ۰ۧ كنŰȘ ŰȘŰłŰȘŰźŰŻÙ… ŰŹÙ‡Ű§ŰČ DVDRAM"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Server: "
-msgstr "Ű§Ù„ŰźŰ§ŰŻÙ…: "
+msgid "Splash selection"
+msgstr "ۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„ŰŽŰ§ŰŽŰ§ŰȘ"
-#: ../../diskdrake/dav.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "Ű§Ù„ŰčÙ†ÙˆŰ§Ù† ÙŠŰŹŰš ŰŁÙ† ÙŠŰšŰŻŰŁ ŰšÙ€ http:// ŰŁÙˆ https://"
+msgid "Extended partition not supported on this platform"
+msgstr "Ű§Ù„ŰȘŰŹŰČۊۧŰȘ Ű§Ù„Ù…Ù…ŰȘŰŻŰ© ŰșÙŠŰ± Ù…ŰŻŰčÙˆÙ…Ű© Űčلى Ù‡Ű°Ù‡ Ű§Ù„ŰšÙŠŰŠŰ©"
-#: ../../diskdrake/dav.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "۱ۏۧۥ ŰŁŰŻŰźÙ„ ŰčÙ†ÙˆŰ§Ù† ŰźŰ§ŰŻÙ… WebDav"
+msgid "ISDN Configuration"
+msgstr "ŰȘÙ‡ÙŠŰŠŰ© ISDN"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mount point"
-msgstr "Ù†Ù‚Ű·Ű© Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„"
+msgid "high"
+msgstr "Ù…Ű±ŰȘفŰč"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Server"
-msgstr "ŰźŰ§ŰŻÙ…"
+msgid "Internet Connection Sharing"
+msgstr "Ù…ŰŽŰ§Ű±ÙƒŰ© Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Mount"
-msgstr "Ű­Ù…Ù„"
+msgid "Choose file"
+msgstr "ۭۧŰȘÙŠŰ§Ű± ملف"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Unmount"
-msgstr "Ű§Ű­Ű°Ù Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
+msgstr ""
+"ŰȘŰ­Ű°ÙŠŰ±! ŰȘم Ű„ÙŠŰŹŰ§ŰŻ Ű„Űčۯۧۯ ۏۯۧ۱ Ù†Ű§Ű±ÙŠ Ù…ÙˆŰŹÙˆŰŻ Ù…ŰłŰšÙ‚Ű§. Ű±ŰšÙ…Ű§ ŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ Ű§Ű”Ù„Ű§Ű­ ÙŠŰŻÙˆÙŠ ŰšŰčŰŻ "
+"Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ."
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New"
-msgstr "ŰŹŰŻÙŠŰŻ"
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "Printing/Photo Card Access on \"%s\""
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
msgstr ""
-"WebDAV هو ۚ۱ŰȘوكول ÙŠŰłÙ…ŰŹ لك ŰšŰȘŰ­Ù…ÙŠÙ„ ŰŻÙ„ÙŠÙ„ في ŰźŰ§ŰŻÙ… Ű§Ù„ÙˆÙŠŰš ŰšŰŽÙƒÙ„\n"
-"Ù…Ű­Ù„ÙŠ, و مŰčŰ§Ù…Ù„ŰȘه ÙƒÙ†ŰžŰ§Ù… Ù…Ù„ÙŰ§ŰȘ Ù…Ű­Ù„ÙŠ (ÙŠŰŹŰš ŰŁÙ† يكون ŰźŰ§ŰŻÙ… Ű§Ù„ÙˆÙŠŰš مŰčŰŻÙ‘\n"
-"ÙƒŰźŰ§ŰŻÙ… WebDAV). ۧ۰ۧ كنŰȘ ŰȘŰ±ÙŠŰŻ Ű§Ű¶Ű§ÙŰ© Ù†Ù‚Ű§Ű· ŰȘŰ­Ù…ÙŠÙ„\n"
-"WebDAV, ۧ۟ŰȘ۱ \"ŰŹŰŻÙŠŰŻ\"."
+"هل ŰȘŰ±ÙŠŰŻ ŰȘمكين Ű§Ù„Ű·ŰšŰ§ŰčŰ© Űčلى Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…Ű°ÙƒÙˆŰ±Ű© ŰŁŰčÙ„Ű§Ù‡ ŰŁÙ… Űčلى Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ في Ű§Ù„ŰŽŰšÙƒŰ© "
+"Ű§Ù„Ù…Ű­Ù„ÙŠŰ©ŰŸ\n"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use ``%s'' instead"
-msgstr "ۧ۳ŰȘŰźŰŻÙ… ``%s'' ŰšŰŻÙ„Ű§ من Ű°Ù„Ùƒ"
+msgid "Printer default settings"
+msgstr "ۧŰčۯۧۯۧŰȘ Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠŰ©"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Type"
-msgstr "Ű§Ù„Ù†ÙˆŰč"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Generic PS2 Wheel Mouse"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "ۧ۳ŰȘŰźŰŻÙ… ``ۧŰČŰ§Ù„Ű© Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„'' ŰŁÙˆÙ„Ű§"
+msgid "Removing old printer \"%s\"..."
+msgstr "ŰŹŰ§Ű±ÙŠ ۧŰČŰ§Ù„Ű© Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„Ù‚ŰŻÙŠÙ…Ű© \"%s\" ..."
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Delete"
-msgstr "Ű„Ù„Űșۧۥ"
+msgid "Select a device !"
+msgstr "ۧ۟ŰȘ۱ ŰŹÙ‡Ű§ŰČŰ§Ù‹!"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create"
-msgstr "Ű§Ù†ŰŽŰ§ŰĄ ŰȘŰŹŰČŰŠŰ©"
+msgid "Remove selected server"
+msgstr "Ű§Ű­Ű°Ù Ű§Ù„ŰźŰ§ŰŻÙ… Ű§Ù„Ù…ŰźŰȘۧ۱"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Filesystem types:"
-msgstr "ŰŁÙ†ÙˆŰ§Űč ŰŁÙ†ŰžÙ…Ű© Ű§Ù„Ù…Ù„ÙŰ§ŰȘ:"
+msgid "French Southern Territories"
+msgstr "Ù…Ù†Ű§Ű·Ù‚ ŰŹÙ†ÙˆŰš ÙŰ±Ù†ŰłŰ§"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Empty"
-msgstr "ÙŰ§Ű±Űș"
+msgid "the vendor name of the processor"
+msgstr "Ű§ŰłÙ… Ù…Ű”Ù†Ù‘Űč Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Windows"
-msgstr "Windows"
+msgid "All data on this partition should be backed-up"
+msgstr "كل Ű§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ Űčلى Ù‡Ű°Ù‡ Ű§Ù„ŰȘŰŹŰČŰŠŰ© ÙŠŰŹŰš Ű­ÙŰžÙ‡Ű§ ۭۧŰȘÙŠŰ§Ű·ÙŠŰ§"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "Installing package %s"
+msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ű­ŰČÙ…Ű© %s"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "Checking device and configuring HPOJ..."
+msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰȘŰŁÙƒŰŻ من Ű§Ù„ŰŹÙ‡Ű§ŰČ Ùˆ ŰȘÙ‡ÙŠŰŠŰ© HPOJ..."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Swap"
-msgstr "Ű§Ù„ŰȘŰšŰŻÙŠÙ„"
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
+msgstr "لكي ŰȘمŰȘلك ŰȘŰŹŰČۊۧŰȘ ŰŁÙƒŰ«Ű±, ÙŠŰ±ŰŹÙ‰ Ű§Ù„Űșۧۥ ŰȘŰŹŰČŰŠŰ© كي ŰȘŰȘمكن من Űčمل ŰȘŰŹŰČŰŠŰ© ممŰȘŰŻŰ©"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Journalised FS"
-msgstr "Journalised FS"
+msgid ""
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
+msgstr ""
+"ŰȘم ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Ű·Ű§ŰšŰčŰ© ŰąÙ„ÙŠŰ§Ù‹ لكي ŰȘŰčŰ·ÙŠÙƒ Ű§Ù„Ù‚ŰŻŰ±Ű© Űčلى Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ ŰłÙˆŰ§Ù‚Ű§ŰȘ ŰšŰ·Ű§Ù‚Ű§ŰȘ Ű§Ù„Ű”ÙˆŰ± "
+"Űčلى ŰŹÙ‡Ű§ŰČك Ű§Ù„ŰŽŰźŰ”ÙŠ. يمكنك Ű§Ù„ŰąÙ† Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ ŰšŰ·Ű§Ù‚Ű§ŰȘ Ű§Ù„Ű”ÙˆŰ± ۚۧ۳ŰȘŰźŰŻŰ§Ù… Ű§Ù„ŰšŰ±Ù†Ű§Ù…ŰŹ "
+"Ű§Ù„Ű±ŰłÙˆÙ…ÙŠ \"MToolsFM\" (Ű§Ù„Ù‚Ű§ŰŠÙ…Ű©: \"ŰȘŰ·ŰšÙŠÙ‚Ű§ŰȘ\" -> \"ŰŁŰŻÙˆŰ§ŰȘ Ű§Ù„Ù…Ù„ÙŰ§ŰȘ\" -> \"Ù…ŰŻÙŠŰ± "
+"Ù…Ù„ÙŰ§ŰȘ MTools\") ŰŁÙˆ ۚۧ۳ŰȘŰźŰŻŰ§Ù… ŰŁŰŻÙˆŰ§ŰȘ \"mtools\" في ۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű± (ŰŁŰŻŰźÙ„ \"man "
+"mtools\" في ۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű± لمŰČÙŠŰŻ من Ű§Ù„Ù…ŰčÙ„ÙˆÙ…Ű§ŰȘ). يمكنك Ű§ÙŠŰŹŰ§ŰŻ Ù†ŰžŰ§Ù… Ù…Ù„ÙŰ§ŰȘ Ű§Ù„ŰšŰ·Ű§Ù‚Ű© "
+"ŰȘŰ­ŰȘ Ű­Ű±Ù Ű§Ù„ŰłÙˆŰ§Ù‚Ű© \"p:\", ŰŁÙˆ Ű­Ű±ÙˆÙ Ű§Ù„ŰłÙˆŰ§Ù‚Ű§ŰȘ Ű§Ù„ŰŁŰźŰ±Ù‰ ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ù„ŰŻÙŠÙƒ ŰŁÙƒŰ«Ű± من ۷ۧۚŰčŰ© "
+"HP مŰč ŰłÙˆŰ§Ù‚Ű§ŰȘ ŰšŰ·Ű§Ù‚Ű§ŰȘ Ű”ÙˆŰ±. في \"MToolsFM\" يمكنك Ű§Ù„ŰȘŰ­ÙˆÙŠÙ„ ŰšÙŠÙ† Ű­Ű±ÙˆÙ Ű§Ù„ŰłÙˆŰ§Ù‚Ű§ŰȘ Űčلى "
+"Ű§Ù„Ű­Ù‚Ù„ Ű§Ù„Ù…ÙˆŰŹÙˆŰŻ في Ű§Ù„Ű±ÙƒÙ† Ű§Ù„ŰŁÙŠŰłŰ± Ű§Ù„Ù‰ Ű§Ù„ŰŁŰčلى في Ù‚ÙˆŰ§ŰŠÙ… Ű§Ù„Ù…Ù„ÙŰ§ŰȘ."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Ext2"
-msgstr "Ext2"
+msgid "Choose packages to install"
+msgstr "ۧ۟ŰȘ۱ Ű§Ù„Ű­ŰČم Ű§Ù„ŰȘي ŰłŰȘÙŰ«ŰšÙ‘ÙŽŰȘ"
-#
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No hard drives found"
-msgstr "نŰč۰۱ Ű§ÙŠŰŹŰ§ŰŻ ŰŁÙ‚Ű±Ű§Ű” Ű”Ù„ŰšŰ©"
+msgid ""
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
+msgstr ""
+"\n"
+" ŰšŰč۶ ۣ۟۷ۧۥ sendmail يكون ŰłŰšŰšÙ‡Ű§ \n"
+" ŰȘÙ‡ÙŠŰŠŰ© ŰłÙŠŰŠŰ© من postfix. Ù„Ű­Ù„ Ù‡Ű°Ű§ Ű§Ù„Ù…ŰŽÙƒÙ„Ű© Űčليك\n"
+" ŰȘŰčيين myhostname ŰŁÙˆ mydomain في ملف /etc/postfix/main.cf\n"
+"\n"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Please click on a partition"
-msgstr "ÙŰ¶Ù„Ű§ ۧ۶ŰșŰ· Űčلى ŰȘŰŹŰČŰŠŰ©"
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr "كل Ű§Ù„ŰȘŰŹŰČۊۧŰȘ و ŰšÙŠŰ§Ù†Ű§ŰȘÙ‡Ű§ ŰłŰȘŰ¶ÙŠŰč من Űčلى Ű§Ù„ŰłÙˆŰ§Ù‚Ű© %s"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
+msgstr "Ù„Ű§ ÙŠÙˆŰŹŰŻ في Ù†ŰžŰ§Ù…Ùƒ Ù…ŰłŰ§Ű­Ű© مŰȘŰšÙ‚Ű© ŰȘكفي للŰȘŰ«ŰšÙŠŰȘ ŰŁÙˆ Ű§Ù„ŰȘŰ±Ù‚ÙŠŰ© (%d > %d)"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
msgstr ""
-"Ù„ŰŻÙŠÙƒ ŰȘŰŹŰČŰŠŰ© Microsofr Windows ÙƒŰšÙŠŰ±Ű©.\n"
-"Ű§Ù‚ŰȘ۱ۭ ŰŁÙ† ŰȘŰșÙŠŰ± Ű­ŰŹÙ… Ù‡Ű°Ù‡ Ű§Ù„ŰȘŰŹŰČŰŠŰ©\n"
-"(ۧ۶ŰșŰ· ŰčÙ„ÙŠÙ‡Ű§ Ű«Ù… ۧ۟ŰȘ۱ \"ŰȘŰșÙŠÙŠŰ± Ű§Ù„Ű­ŰŹÙ…\")"
+"كل ۷ۧۚŰčŰ© ŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ Ű§ŰłÙ… (Ù…Ű«Ű§Ù„ \"printer\"). Ű­Ù‚ÙˆÙ„ Ű§Ù„ÙˆŰ”Ù و Ű§Ù„Ù…ÙƒŰ§Ù† Ù„ÙŠŰł من "
+"Ű§Ù„Ű¶Ű±ÙˆŰ±ÙŠ Ù…Ù„Ű€Ù‡Ű§. Ű§Ù†Ù‡Ű§ Ù…ŰŹŰ±ŰŻ Ù…Ù„Ű§Ű­ŰžŰ§ŰȘ Ù„Ù„Ù…ŰłŰȘŰźŰŻÙ…ÙŠÙ†."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
+msgstr ""
+"\"%s\": Ű§Ù„Ù†Ù‚Ű± Űčلى \"%s\" ŰłÙŠÙŰȘŰ­ مŰčŰ§Ù„ŰŹ ŰȘÙ‡ÙŠŰŠŰ©\n"
+"Ű§Ù„Ű·Ű§ŰšŰčŰ©. Ű§Ù‚Ű±ŰŁ Ű§Ù„ÙŰ¶Ù„ Ű§Ù„Ù…ŰźŰȘŰ” في ``ŰŻÙ„ÙŠÙ„ Ű§Ù„Ù…ŰšŰȘŰŻŰŠ''\n"
+"لكŰČÙŠŰŻ من Ű§Ù„Ù…ŰčÙ„ÙˆÙ…Ű§ŰȘ Űčن ÙƒÙŠÙÙŠŰ© ۧŰčۯۧۯ ۷ۧۚŰčŰ© ŰŹŰŻÙŠŰŻŰ©. Ű§Ù„ÙˆŰ§ŰŹÙ‡Ű©\n"
+"Ù‡Ù†Ű§Ùƒ Ù…Ù…Ű§Ű«Ù„Ű© لŰȘلك Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…Ű© ŰŁŰ«Ù†Ű§ŰĄ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ."
+
+#: ../../lang.pm:1
#, c-format
-msgid "Choose action"
-msgstr "ۧ۟ŰȘ۱ Ű­ŰŻŰ«"
+msgid "Bhutan"
+msgstr "ŰšÙˆŰȘŰ§Ù†"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Wizard"
-msgstr "Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ"
+msgid "Network interface"
+msgstr "ÙˆŰ§ŰŹÙ‡Ű© Ű§Ù„ŰŽŰšÙƒŰ© "
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"ۧ۰ۧ كنŰȘ ŰȘŰ±ÙŠŰŻ ۧ۳ŰȘŰźŰŻŰ§Ù… aboot, ÙÙ„Ű§ ŰȘÙ†ŰłÙ‰ ŰŁÙ† ŰȘŰȘŰ±Ùƒ Ù…ŰłŰ§Ű­Ű© ÙŰ§Ű±ŰșŰ© في\n"
-"ŰšŰŻŰ§ÙŠŰ© Ű§Ù„Ù‚Ű±Ű” (2048 Ù‚Ű·Ű§ŰčۧŰȘ ÙƒŰ§ÙÙŠŰ©)"
+msgid "Reading printer data..."
+msgstr "ŰŹŰ§Ű±ÙŠ Ù‚Ű±Ű§ŰĄŰ© ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„Ű·Ű§ŰšŰčŰ©..."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please make a backup of your data first"
-msgstr "۱ۏۧۥ قم ŰšŰčمل Ù†ŰłŰźŰ© ۭۧŰȘÙŠŰ§Ű·ÙŠŰ© من ŰšÙŠŰ§Ù†Ű§ŰȘك ŰŁÙˆÙ„Ű§"
+msgid "Korean keyboard"
+msgstr "Ù„ÙˆŰ­Ű© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­ Ű§Ù„ÙƒÙˆŰ±ÙŠŰ©"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Read carefully!"
-msgstr "Ű§Ù‚Ű±ŰŁ ŰŹÙŠŰŻŰ§!"
+msgid "Not connected"
+msgstr "ŰșÙŠŰ± مŰȘŰ”Ù„"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Encryption key (again)"
-msgstr "Ù…ÙŰ§ŰȘŰ­ Ű§Ù„ŰȘŰŽÙÙŠŰ± (Ù…Ű±Ű© ŰŁŰźŰ±Ù‰)"
+msgid "Greek"
+msgstr "Ű§Ù„ÙŠÙˆÙ†Ű§Ù†ÙŠŰ©"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Encryption key"
-msgstr "Ù…ÙŰ§ŰȘŰ­ Ű§Ù„ŰȘŰŽÙÙŠŰ±"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The encryption keys do not match"
-msgstr "Ù…ÙŰ§ŰȘÙŠŰ­ Ű§Ù„ŰȘŰŽÙÙŠŰ± ŰșÙŠŰ± مŰȘŰ·Ű§ŰšÙ‚Ű©"
+msgid "Saint Kitts and Nevis"
+msgstr "ŰłŰ§Ù†ŰȘ كيŰȘŰł و Ù†ÙŠÙÙŠŰł"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "مفŰȘۭۧ Ű§Ù„ŰȘŰŽÙÙŠŰ± Ù‡Ű°Ű§ ŰšŰłÙŠŰ· ۏۯۧ (ÙŠŰŹŰš ŰŁÙ† يكون %d Ű­Ű±ÙŰ§ Űčلى Ű§Ù„ŰŁÙ‚Ù„)"
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
+msgstr ""
+"ŰȘم Ű§Ù„Ù†Ù‚Ù„ ŰšÙ†ŰŹŰ§Ű­\n"
+"Ű±ŰšÙ…Ű§ ŰȘŰ±ÙŠŰŻ Ű§Ù„ŰȘŰ­Ù‚Ù‚ ۧ۰ۧ ÙƒŰ§Ù† يمكنك Ű§Ù„ŰŻŰźÙˆÙ„ Ű§Ù„Ù‰ ŰźŰ§ŰŻÙ… ŰšŰ§Ù„ŰŁÙ…Ű±:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"ŰŻÙˆÙ† ŰȘÙ†ŰšÙŠÙ‡Ùƒ Ű§Ù„Ù‰ Ű§ŰŻŰźŰ§Ù„ ÙƒÙ„Ù…Ű© Ù…Ű±ÙˆŰ±."
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "ۧ۟ŰȘ۱ مفŰȘۭۧ ŰȘŰŽÙÙŠŰ± Ù†ŰžŰ§Ù… Ű§Ù„Ù…Ù„ÙŰ§ŰȘ"
+msgid "Enable OF Boot?"
+msgstr "ŰȘمكين Ű§Ù‚Ù„Ű§Űč OF۟"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Filesystem encryption key"
-msgstr "مفŰȘۭۧ ŰȘŰŽÙÙŠŰ± Ù†ŰžŰ§Ù… Ű§Ù„Ù…Ù„ÙŰ§ŰȘ"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "Ù„Ű§ يمكنك ۧ۳ŰȘŰźŰŻŰ§Ù… JFS للŰȘŰŹŰČۊۧŰȘ ŰŁŰ”Űș۱ من 16 ميŰșŰ§ŰšŰ§ÙŠŰȘ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Type: "
-msgstr "Ű§Ù„Ù†ÙˆŰč: "
+msgid "Monitor VertRefresh: %s\n"
+msgstr "Ű§Ù†Űčۧێ Ű§Ù„ŰŽŰ§ŰŽŰ© Ű§Ù„Ű±ŰŁŰłÙŠ: %s\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "on channel %d id %d\n"
-msgstr "Űčلى Ű§Ù„Ù‚Ù†Ű§Ű© %d id %d\n"
+msgid "path"
+msgstr "Ű§Ù„Ù…ŰłŰ§Ű±"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Partition table type: %s\n"
-msgstr "نوŰč ŰŹŰŻÙˆÙ„ Ű§Ù„ŰȘÙ‚ŰłÙŠÙ…: %s\n"
+msgid "Mount point"
+msgstr "Ù†Ù‚Ű·Ű© Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "LVM-disks %s\n"
-msgstr "ŰŁÙ‚Ű±Ű§Ű” LVM %s\n"
+msgid ""
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
+msgstr ""
+"ŰžÙ‡Ű± ۟۷ۣ:\n"
+"%s\n"
+"Ű­Ű§ÙˆÙ„ ŰȘŰșÙŠÙŠŰ± ŰšŰč۶ Ű§Ù„Ù…ŰčŰ§Ù…Ù„Ű§ŰȘ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Info: "
-msgstr "مŰčÙ„ÙˆÙ…Ű§ŰȘ: "
+msgid "Restore system"
+msgstr "ۧ۳ŰȘŰčŰŻ Ű§Ù„Ù†Ù‘ŰžŰ§Ù…"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Ű§Ù„Ù‡Ù†ŰŻŰłŰ©: %s Ű§ŰłŰ·ÙˆŰ§Ù†Ű©, %s ۱ۣ۳, %s Ù‚Ű·Ű§Űč\n"
+msgid ""
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
+msgstr "ŰȘÙˆŰ­ŰŻ Ù…Ű§ÙƒÙŠÙ†Ű§ŰȘ ÙŠŰŹŰš ŰŁÙ† ŰȘكون Ű§Ù„Ù…Ű§ŰłŰ­Ű§ŰȘ Ű§Ù„Ű¶ÙˆŰŠÙŠŰ© Ű§Ù„Ù…ÙˆŰ”ÙˆÙ„Ű© Ù…Ű­Ù„ÙŠŰ§Ù‹ مŰȘÙˆÙŰ±Ű© Ù„Ù‡Ű§:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Size: %s\n"
-msgstr "Ű§Ù„Ű­ŰŹÙ…: %s\n"
+msgid "The DHCP end ip"
+msgstr "DHCP end ip"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Read-only"
-msgstr "Ù„Ù„Ù‚Ű±Ű§ŰĄŰ© ÙÙ‚Ű·"
+msgid "Another one"
+msgstr "۹۟۱"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Device: "
-msgstr "Ű§Ù„ŰŹÙ‡Ű§ŰČ: "
+msgid "Drakbackup"
+msgstr "Drakbackup"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"ŰȘŰŹŰČŰŠŰ© Ű§Ù„Ű„Ù‚Ù„Ű§Űč\n"
-"Ù‡Ű°Ù‡ هي\n"
-"Ù„Ù„Ű„Ù‚Ù„Ű§Űč Ű§Ù„Ù…ŰČŰŻÙˆŰŹ في Ù†ŰžŰ§Ù…Ùƒ.\n"
+msgid "Colombia"
+msgstr "ÙƒÙˆÙ„ÙˆÙ…ŰšÙŠŰ§"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
+"Current configuration of `%s':\n"
"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
msgstr ""
+"Ű§Ù„Ű„Űčۯۧۯ Ű§Ù„Ű­Ű§Ù„ÙŠ لـ`%s':\n"
"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"Ű§Ù„ŰŽŰšÙƒŰ©: %s\n"
+"ŰčÙ†ÙˆŰ§Ù† Ű§Ù„Ù€IP: %s\n"
+"Ű”ÙŰ© Ű§Ù„Ù€IP: %s\n"
+"Ű§Ù„Ù…ŰŽŰșل: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Loopback file name: %s"
-msgstr "Ű§ŰłÙ… ملف Loopback: %s"
+msgid "Plug'n Play"
+msgstr "Plug'n Play"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "RAID-disks %s\n"
-msgstr "ŰŁÙ‚Ű±Ű§Ű” RAID %s\n"
+msgid "Reunion"
+msgstr "Ű±ÙŠÙˆÙ†ÙŠÙˆÙ†"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Chunk size %s\n"
-msgstr "Ű­ŰŹÙ… Chunk %s\n"
+msgid "Details"
+msgstr "ŰȘÙŰ§Ű”ÙŠÙ„"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Level %s\n"
-msgstr "Ű§Ù„Ù…ŰłŰȘوى %s\n"
+msgid "For security reasons, it will be disconnected now."
+msgstr "Ù„ŰŁŰłŰšŰ§Űš ŰŁÙ…Ù†ÙŠŰ©, ŰłÙŠŰȘم Ù‚Ű·Űč Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ Ű§Ù„ŰąÙ†."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Ű§Ù„ŰȘŰŹŰČŰŠŰ© Ű§Ù„ŰȘي يŰȘم Ű§Ù‚Ù„Ű§ŰčÙ‡Ű§ Ű§ÙŰȘŰ±Ű§Ű¶ÙŠŰ§\n"
-" (لـ MS-DOS و Ù„ÙŠŰł لـ lilo)\n"
+msgid "Synchronization tool"
+msgstr "DrakSync"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Checking your system..."
+msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰȘŰŁÙƒŰŻ من Ù†ŰžŰ§Ù…Ùƒ..."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Print"
+msgstr "Ű„Ű·ŰšŰč"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Loopback file(s):\n"
-" %s\n"
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
msgstr ""
-"ملف(ۧŰȘ) Loopback:\n"
-" %s\n"
+"ŰŁŰŻŰźÙ„ Ű§Ù„ŰŽŰ±ÙŠŰ· ŰšŰ§Ù„ŰčÙ„Ű§Ù…Ű© %s\n"
+" في ŰŹÙ‡Ű§ŰČ Ű§Ù„ŰŽŰ±ÙŠŰ· %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+msgid "Mongolia"
+msgstr "منŰșÙˆÙ„ÙŠŰ§"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Mounted\n"
msgstr "Ù…Ű­Ù…Ù„\n"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Not formatted\n"
-msgstr "ŰșÙŠŰ± Ù…ŰŹÙ‡ŰČ\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Formatted\n"
-msgstr "Ù…ŰŹÙ‡ŰČ\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Graphical Interface"
+msgstr "Ű§Ù„ÙˆŰ§ŰŹÙ‡Ű© Ű§Ù„Ű±ŰłÙˆÙ…ÙŠŰ©"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Ű§Ù„Ű§ŰłŰ·ÙˆŰ§Ù†Ű© %d Ű§Ù„Ù‰ %d\n"
+msgid "Restore Users"
+msgstr "ŰŁŰčŰŻ Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…ÙŠÙ† "
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s Ù‚Ű·Ű§Űč"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Encryption key for %s"
+msgstr "Ù…ÙŰ§ŰȘŰ­ Ű§Ù„ŰȘŰŽÙÙŠŰ±"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Size: %s"
-msgstr "Ű§Ù„Ű­ŰŹÙ…: %s"
+msgid ""
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
+msgstr ""
+"يقوم portmapper ۚۄۯۧ۱۩ ۧŰȘŰ”Ű§Ù„Ű§ŰȘ RPC, و Ű§Ù„ŰȘي ŰȘŰłŰȘŰźŰŻÙ… Űčن Ű·Ű±ÙŠÙ‚\n"
+"ŰšŰ±ÙˆŰȘÙˆÙƒÙˆÙ„Ű§ŰȘ Ù…Ű«Ù„ NFS و NIS. ŰźŰ§ŰŻÙ… portmap من Ű§Ù„Ù„Ű§ŰČم ŰŁÙ† يŰčمل Űčلى Ű§Ù„ŰŁŰŹÙ‡ŰČŰ©\n"
+"Ű§Ù„ŰȘي ŰȘŰčمل ÙƒŰźŰ§ŰŻÙ…Ű§ŰȘ ŰȘŰłŰȘŰźŰŻÙ… Ű§Ù„ŰšŰ±ÙˆŰȘÙˆÙƒÙˆÙ„Ű§ŰȘ Ű§Ù„ŰȘي ŰȘŰłŰȘÙÙŠŰŻ من ŰąÙ„ÙŠŰ© Űčمل RPC."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Start: sector %s\n"
-msgstr "Ű§Ù„ŰšŰŻŰ§ÙŠŰ©: Ù‚Ű·Ű§Űč %s\n"
+msgid "Detected hardware"
+msgstr "Ű§Ù„ŰčŰȘۧۯ Ű§Ù„Ù…ÙÙƒŰȘŰŽÙ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Name: "
-msgstr "Ű§Ù„Ű§ŰłÙ…: "
+msgid "Mauritius"
+msgstr "Ù…ÙˆŰ±ÙŠŰŽÙŠÙˆŰł"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Ű­Ű±Ù ŰłÙˆŰ§Ù‚Ű© DOS: %s (Ù…ŰŹŰ±ŰŻ ŰȘŰźÙ…ÙŠÙ†)\n"
+msgid "Myanmar (Burmese)"
+msgstr "Ù…ÙŠŰ§Ù†Ù…Ű§Ű± (Ű§Ù„ŰšÙˆŰ±Ù…ÙŠŰ©)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "partition %s is now known as %s"
-msgstr "Ű§Ù„ŰȘŰŹŰČŰŠŰ© %s مŰčŰ±ÙˆÙŰ© Ű§Ù„ŰąÙ† ŰšŰ§Ù„Ű„ŰłÙ… %s"
+msgid "Enabling swap partition %s"
+msgstr "ŰŹŰ§Ű±ÙŠ ŰȘمكين ŰȘŰŹŰČŰŠŰ© Ű§Ù„ŰȘŰšŰŻÙŠÙ„ %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Removing %s"
-msgstr "ŰŹŰ§Ű±ÙŠ ۧŰČŰ§Ù„Ű© %s"
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgstr ""
+"Ù„Ű§ ŰȘÙˆŰŹŰŻ ŰȘŰŹŰČŰŠŰ© FAT Ù„Ű§ŰłŰȘŰźŰŻŰ§Ù…Ù‡Ű§ كـ loopback (ŰŁÙˆ Ù„Ű§ ŰȘÙˆŰŹŰŻ Ù…ŰłŰ§Ű­Ű© ÙƒŰ§ÙÙŠŰ© مŰȘŰšÙ‚ÙŠŰ©)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Copying %s"
-msgstr "ŰŹŰ§Ű±ÙŠ Ù†ŰłŰź %s"
+msgid "Armenian (old)"
+msgstr "Ű§Ù„ŰŁŰ±Ù…ÙŠÙ†ÙŠŰ© (Ù‚ŰŻÙŠÙ…)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Moving files to the new partition"
-msgstr "ŰŹŰ§Ű±ÙŠ نقل Ű§Ù„Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ù‰ Ű§Ù„ŰȘŰŹŰČŰŠŰ© Ű§Ù„ŰŹŰŻÙŠŰŻŰ©"
+msgid ""
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
+msgstr ""
+"Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„Ù…ŰłÙ…Ű§Ű© \"%s\" Ù…ÙˆŰŹÙˆŰŻŰ© Ù…ŰłŰšÙ‚Ű§ ŰȘŰ­ŰȘ %s. \n"
+"Ű§Ù†Ù‚Ű± \"Ű§Ù†Ù‚Ù„\" للكŰȘۧۚ۩ فوقه.\n"
+"يمكنك ÙƒŰ°Ù„Ùƒ كŰȘۧۚ۩ Ű§ŰłÙ… ŰŹŰŻÙŠŰŻ ŰŁÙˆ ŰȘŰ­Ű·ÙŠ Ù‡Ű°Ù‡ Ű§Ù„Ű·Ű§ŰšŰčŰ©."
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
msgstr ""
-"Ű§Ù„ŰŻÙ„ÙŠÙ„ %s ÙŠŰ­ŰȘوي Ù…ŰłŰšÙ‚Ű§ Űčلى ŰšŰč۶ Ű§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ\n"
-"(%s)"
+"ۧŰč۫۱ Űčلى Ű­Ù„ÙˆÙ„ Ù„Ù…ŰŽŰ§ÙƒÙ„Ùƒ ۚۧ۳ŰȘŰźŰŻŰ§Ù… ŰšÙŠŰŠŰ© Ű§Ù„ŰŻŰčم Ű§Ù„ÙÙ†ÙŠ Űčلى Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ في MandrakeSoft"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hide files"
-msgstr "۟ۚۊ Ű§Ù„Ù…Ù„ÙŰ§ŰȘ"
+msgid ", host \"%s\", port %s"
+msgstr ", Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ \"%s\", Ű§Ù„Ù…Ù†ÙŰ° %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Move files to the new partition"
-msgstr "Ű§Ù†Ù‚Ù„ Ű§Ù„Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ù‰ ŰȘŰŹŰČŰŠŰ© ŰŹŰŻÙŠŰŻŰ©"
+msgid "Monaco"
+msgstr "Ù…ÙˆÙ†Ű§ÙƒÙˆ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "ŰšŰčŰŻ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰȘÙ‚ŰłÙŠÙ… %s, ÙŰ„Ù† كل Ű§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„Ù…ÙˆŰŹÙˆŰŻŰ© Űčلى Ű§Ù„ŰȘŰŹŰČŰŠŰ© ŰłŰȘÙÙ‚ŰŻ"
+msgid "%s formatting of %s failed"
+msgstr "%s ŰȘŰŹÙ‡ÙŠŰČ %s Ù‚ŰŻ ÙŰŽÙ„"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "ŰłŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ ۧŰčۧۯ۩ Ű§Ù„ŰȘŰŽŰșيل Ù‚ŰšÙ„ ŰŁÙ† يŰȘم ŰȘفŰčيل Ű§Ù„ŰȘŰčŰŻÙŠÙ„Ű§ŰȘ"
+msgid "Partitioning failed: %s"
+msgstr "ÙŰŽÙ„ŰȘ Ű§Ù„ŰȘŰŹŰČŰŠŰ©: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "ŰŹŰŻÙˆÙ„ ۧŰȘŰȘÙ‚ŰłÙŠÙ… Ù„Ù„Ù‚Ű±Ű” %s ŰłÙŠŰȘم كŰȘۧۚŰȘه Ű§Ù„Ù‰ Ű§Ù„Ù‚Ű±Ű”!"
+msgid "Canada (cable)"
+msgstr "ÙƒÙ†ŰŻŰ© (cable)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "Ű§Ù„Ű­ŰČÙ…Ű© %s ÙŠŰŹŰš ŰŁÙ† ŰȘÙŰ«ŰšÙ‘ŰȘ. هل ŰȘŰ±ÙŠŰŻ ŰȘŰ«ŰšÙŠŰȘÙ‡Ű§ŰŸ"
+msgid "Upgrade"
+msgstr "ŰȘŰ±Ù‚ÙŠŰ©"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "What type of partitioning?"
-msgstr "ŰŁÙŠ نوŰč من Ű§Ù„ŰȘŰŹŰČŰŠŰ©ŰŸ"
+msgid "Workstation"
+msgstr "Ù…Ű­Ű·Ű© Űčمل"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "كن ۭ۰۱ۧ: Ù‡Ű°Ù‡ Ű§Ù„ŰčÙ…Ù„ÙŠŰ© ŰźŰ·ÙŠŰ±Ű©"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"ŰŹŰ§Ű±ÙŠ ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ű­ŰČÙ…Ű© %s\n"
+"%d%%"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "chunk size"
-msgstr "Ű­ŰŹÙ… chunk"
+msgid "Kyrgyzstan"
+msgstr "Ù‚ÙŠŰ±ŰșيŰČŰłŰȘŰ§Ù†"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "level"
-msgstr "Ű§Ù„Ù…ŰłŰȘوى"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "With basic documentation"
+msgstr "مŰč ÙˆŰ«Ű§ŰŠÙ‚ Ű§Ù„Ù…ŰłŰ§ŰčŰŻŰ© Ű§Ù„ŰŁŰłŰ§ŰłÙŠŰ© (Ù…ÙŰ¶Ù‘Ù„)"
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#: ../../services.pm:1
#, c-format
-msgid "device"
-msgstr "ÙˆŰ­ŰŻŰ©"
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anacron ۣۯۧ۩ لŰȘŰŽŰșيل Ű§Ù„ŰŁÙˆŰ§Ù…Ű± في ŰŁÙˆÙ‚Ű§ŰȘ Ù…Ű­ŰŻŰŻŰ©."
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Various"
-msgstr "مŰȘنوŰčŰ©"
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"ÙŠŰŹŰš ŰŁÙ† ŰȘكون Ù„ŰŻÙŠÙƒ ŰȘŰŹŰČŰŠŰ© ŰŹŰ°Ű±ÙŠŰ©.\n"
+"Ù„Ù‡Ű°Ű§ Ű§Ù„Űș۱۶ Ű§Ù†ŰŽŰŠ ŰȘŰŹŰČŰŠŰ© (ŰŁÙˆ Ű§Ù†Ù‚Ű± Űčلى ŰȘŰŹŰČŰŠŰ© Ù…ÙˆŰŹÙˆŰŻŰ©).\n"
+"Ű«Ù… ۧ۟ŰȘ۱ ``Ù†Ù‚Ű·Ű© Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„'' و ۧۏŰčÙ„Ù‡Ű§ `/'"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Mount options"
-msgstr "ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„"
+msgid "Proxy should be http://..."
+msgstr "Ű§Ù„ŰšŰ±ÙˆÙƒŰłÙŠ ÙŠŰŹŰš ŰŁÙ† يكون http://..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "File already exists. Use it?"
-msgstr "Ű§Ù„Ù…Ù„Ù Ù…ÙˆŰŹÙˆŰŻ Ù…ŰłŰšÙ‚Ű§, هل ŰȘŰ±ÙŠŰŻ ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡ŰŸ"
+msgid "South Africa"
+msgstr "ŰŹÙ†ÙˆŰš ŰŁÙŰ±ÙŠÙ‚ÙŠŰ§ "
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "Ù‡Ű°Ű§ Ű§Ù„Ù…Ù„Ù Ù…ŰłŰȘŰźŰŻÙ… من loopback ŰŁŰźŰ±Ù‰, ۧ۟ŰȘ۱ Ù…Ù„ÙŰ§ ۹۟۱"
+msgid "Western Sahara"
+msgstr "Ű§Ù„Ű”Ű­Ű±Ű§ŰĄ Ű§Ù„ŰșŰ±ŰšÙŠŰ©"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Give a file name"
-msgstr "ۧŰčŰ· Ű§ŰłÙ… ملف"
+msgid "Etherboot Floppy/ISO"
+msgstr "Etherboot Floppy/ISO"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Filesystem type: "
-msgstr "نوŰč Ù†ŰžŰ§Ù… Ű§Ù„Ù…ÙŰ§ŰȘ: "
+msgid "Modify printer configuration"
+msgstr "ŰȘŰčŰŻÙŠÙ„ ۧŰčۯۧۯۧŰȘ Ű§Ù„Ű·Ű§ŰšŰčŰ©"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Size in MB: "
-msgstr "Ű§Ù„Ű­ŰŹÙ… ŰšŰ§Ù„ÙŠŰșŰ§ŰšŰ§ÙŠŰȘ: "
+msgid "Choose a partition"
+msgstr "Ű„ŰźŰȘ۱ ŰȘŰŹŰČŰŠŰ©"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Loopback file name: "
-msgstr "Ű§ŰłÙ… ملف Loopback: "
+msgid "Edit current rule"
+msgstr "Ű­Ű±Ù‘Ű± Ű§Ù„Ù‚Ű§ŰčŰŻŰ© Ű§Ù„Ű­Ű§Ù„ÙŠŰ©"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Loopback"
-msgstr "Loopback"
+msgid "%s"
+msgstr "%s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "Ù‡Ű°Ù‡ Ű§Ù„ŰȘŰŹŰČŰŠŰ© Ù„Ű§ يمكن ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡Ű§ لـloopback"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "LVM name?"
-msgstr "Ű§ŰłÙ… LVM۟"
+msgid "Please test the mouse"
+msgstr "من ÙŰ¶Ù„Ùƒ ۧ۟ŰȘۚ۱ Ű§Ù„ÙŰŁŰ±Ű©"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "new"
-msgstr "ŰŹŰŻÙŠŰŻ"
+msgid "Other Media"
+msgstr "ÙˆŰłÙŠŰ· ۹۟۱"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "ۧ۟ŰȘ۱ LVM l,ŰŹÙˆŰŻ Ù„Ù„Ű§Ű¶Ű§ÙŰ©"
+msgid "Backup system files"
+msgstr "Ű§Ù†ŰłŰź Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ù†ŰžŰ§Ù…"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "ۧ۟ŰȘ۱ RAID Ù…ÙˆŰŹÙˆŰŻ Ù„Ù„Ű§Ű¶Ű§ÙŰ©"
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Moving partition..."
-msgstr "ŰŹŰ§Ű±ÙŠ نقل Ű§Ù„ŰȘŰŹŰČŰŠŰ©..."
+msgid "Sector"
+msgstr "Ű§Ù„Ù‚Ű·Ű§Űč"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Moving"
-msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„Ù†Ù‚Ù„"
+msgid "Qatar"
+msgstr "Ù‚Ű·Ű±"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "ŰŁÙŠ Ù‚Ű·Ű§Űč ŰȘŰ±ÙŠŰŻ Ù†Ù‚Ù„Ù‡ŰŸ"
+msgid "LDAP Base dn"
+msgstr "LDAP Base dn"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Sector"
-msgstr "Ű§Ù„Ù‚Ű·Ű§Űč"
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr "Ù„Ű§ يمكنك ۧ۟ŰȘÙŠŰ§Ű± Ù‡Ű°Ù‡ Ű§Ù„Ű­ŰČÙ…Ű© Ù„ŰŁÙ†Ù‡ Ù„Ű§ ÙŠÙˆŰŹŰŻ Ù…ŰłŰ§Ű­Ű© ÙƒŰ§ÙÙŠŰ© مŰȘŰšÙ‚ÙŠŰ© لŰȘŰ«ŰšÙŠŰȘÙ‡Ű§"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "ŰŁÙŠ Ù‚Ű±Ű” ŰȘŰ±ÙŠŰŻ Ù†Ù‚Ù„Ù‡ŰŸ"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "generate auto-install floppy"
+msgstr "Ű§Ù†ŰŽŰŠ Ù‚Ű±Ű” ŰȘŰ«ŰšÙŠŰȘ ŰąÙ„ÙŠ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Move"
-msgstr "نقل"
+msgid "Dialing mode"
+msgstr "ÙˆŰ¶ŰčÙŠŰ© Ű§Ù„Ű„ŰȘŰ”Ű§Ù„"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "New size in MB: "
-msgstr "Ű§Ù„Ű­ŰŹÙ… Ű§Ù„ŰŹŰŻÙŠŰŻ ŰšŰ§Ù„Ù…ÙŠŰșŰ§ŰšŰ§ÙŠŰȘ: "
+msgid "File sharing"
+msgstr "Ù…ŰŽŰ§Ű±ÙƒŰ© Ű§Ù„Ù…Ù„ÙŰ§ŰȘ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Choose the new size"
-msgstr "ۧ۟ŰȘ۱ Ű§Ù„Ű­ŰŹÙ… Ű§Ù„ŰŹŰŻÙŠŰŻ"
+msgid "Clean /tmp at each boot"
+msgstr "قم ŰšŰȘÙ†ŰžÙŠÙ /tmp ŰčÙ†ŰŻ كل Ű„Ù‚Ù„Ű§Űč"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Resize"
-msgstr "ŰȘŰșÙŠÙŠŰ± Ű§Ù„Ű­ŰŹÙ…"
+msgid "Malawi"
+msgstr "Ù…Ű§Ù„Ű§ÙˆÙŠ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "ŰšŰčŰŻ ŰȘŰșÙŠÙŠŰ± Ű­ŰŹÙ… Ű§Ù„ŰȘŰŹŰČŰŠŰ© %s, ÙŰ„Ù† كل Ű§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ Űčلى Ù‡Ű°Ù‡ Ű§Ù„ŰȘŰŹŰČŰŠŰ© ŰłŰȘÙÙ‚ŰŻ"
+msgid "Please choose your type of mouse."
+msgstr "ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ نوŰč Ű§Ù„ÙŰŁŰ±Ű©."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "كل Ű§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ Űčلى Ù‡Ű°Ù‡ Ű§Ù„ŰȘŰŹŰČŰŠŰ© ÙŠŰŹŰš Ű­ÙŰžÙ‡Ű§ ۭۧŰȘÙŠŰ§Ű·ÙŠŰ§"
+msgid "class of hardware device"
+msgstr "ÙŰŠŰ© ŰŹÙ‡Ű§ŰČ Ű§Ù„ŰčŰȘۧۯ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This partition is not resizeable"
-msgstr "Ù‡Ű°Ű§ Ű§Ù„ŰȘÙ‚ŰłÙŠÙ… ŰșÙŠŰ± Ù‚Ű§ŰšÙ„ لŰȘŰșÙŠÙŠŰ± Ű§Ù„Ű­ŰŹÙ…"
+msgid ""
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
+msgstr ""
+"Ù‡Ű°Ù‡ هي Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű§ŰȘ و Ű§Ù„ŰŽŰšÙƒŰ§ŰȘ Ű§Ù„ŰȘي ÙŠŰŹŰš ŰŁÙ† ŰȘكون Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…Ű­Ù„ÙŠŰ© مŰȘÙˆÙŰ±Ű© Ù„Ù‡Ű§:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "ŰŹŰ§Ű±ÙŠ ۭ۳ۧۚ Ű±ÙˆŰ§ŰšŰ· Ù†ŰžŰ§Ù… Ù…Ù„ÙŰ§ŰȘ FAT"
+msgid "United Kingdom"
+msgstr "Ű§Ù„Ù…Ù…Ù„ÙƒŰ© Ű§Ù„Ù…ŰȘŰ­ŰŻŰ©"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "ŰŁÙŠÙ† ŰȘŰ±ÙŠŰŻ ŰȘŰ­Ù…ÙŠÙ„ Ű§Ù„ŰŹÙ‡Ű§ŰČ %s۟"
+msgid "running"
+msgstr "ŰȘŰčمل"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"لم يمكن ۧŰČŰ§Ù„Ű© ŰȘŰčيين Ù†Ù‚Ű·Ű© Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„ Ù†ŰžŰ±Ű§ Ù„ŰŁÙ† Ù‡Ű°Ù‡ Ű§Ù„ŰȘŰŹŰČŰŠŰ© Ù…ŰłŰȘŰźŰŻÙ…Ű© لـloop back.\n"
-"قم ۚۄŰČŰ§Ù„Ű© Ű§Ù„Ù€loopback ŰŁÙˆÙ„Ű§"
+msgid "default"
+msgstr "Ű§Ù„Ù…Ű±ŰŹŰč"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "ŰŁÙŠÙ† ŰȘŰ±ÙŠŰŻ ŰȘŰ­Ù…ÙŠÙ„ Ű§Ù„ŰŹÙ‡Ű§ŰČ %s۟"
+msgid "Indonesia"
+msgstr "Ű§Ù†ŰŻÙˆÙ†ÙŠŰłÙŠŰ§"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "ŰŁÙŠÙ† ŰȘŰ±ÙŠŰŻ ŰȘŰ­Ù…ÙŠÙ„ ملف loopback %s۟"
+msgid "France [SECAM]"
+msgstr "ÙŰ±Ù†ŰłŰ§ [ŰłÙŠÙƒŰ§Ù…]"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰȘŰșÙŠÙŠŰ± من ext2 Ű§Ù„Ù‰ ext3"
+msgid "restrict"
+msgstr "ŰȘŰŽŰŻÙŠŰŻ"
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Which filesystem do you want?"
-msgstr "ŰŁÙŠ Ù†ŰžŰ§Ù… Ù…Ù„ÙŰ§ŰȘ ŰȘŰ±ÙŠŰŻŰŸ"
+msgid "must have"
+msgstr "ÙŠŰŹŰš ŰŁÙ† يكون Ù„ŰŻÙŠÙƒ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Change partition type"
-msgstr "ŰșÙŠŰ± نوŰč Ű§Ù„ŰȘŰŹŰČŰŠŰ©"
+msgid ""
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
+msgstr ""
+"CUPS Ù„Ű§ ÙŠŰŻŰčم Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Űčلى ŰŁŰŹÙ‡ŰČŰ© Novell Ű§Ù„ŰźŰ§ŰŻÙ…Ű© ŰŁÙˆ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„ŰȘي ŰȘŰ±ŰłÙ„ "
+"Ű§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„Ù‰ ŰŁÙ…Ű± ۭ۱.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "ŰšŰčŰŻ ŰȘŰșÙŠÙŠŰ± نوŰč Ű§Ù„ŰȘŰŹŰČŰŠŰ© %s, ÙŰ„Ù†Ùƒ ŰłŰȘ۳۟۱ كل Ű§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ Űčلى Ű§Ù„ŰȘŰŹŰČŰŠŰ©"
+msgid "Senegal"
+msgstr "Ű§Ù„ŰłÙ†ŰșŰ§Ù„"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove the loopback file?"
-msgstr "هل ŰȘŰ±ÙŠŰŻ ۧŰČŰ§Ù„Ű© ملف loopback۟"
+msgid "Command line"
+msgstr "۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű±"
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
msgstr ""
-"Ù„Ű§ يمكنك Ű§Ù†ŰŽŰ§ŰĄ ŰȘŰŹŰČŰŠŰ© ŰŹŰŻÙŠŰŻŰ©\n"
-"(Ù„ŰŁÙ†Ùƒ ÙˆŰ”Ù„ŰȘ Ű§Ù„Ù‰ Ű§Ù„ŰčŰŻŰŻ Ű§Ù„ŰŁÙ‚Ű”Ù‰ من Ű§Ù„ŰȘŰŹŰČۊۧŰȘ Ű§Ù„ŰŁŰłŰ§ŰłÙŠŰ©).\n"
-"ŰŁÙˆÙ„Ű§Ù‹ Ű§ŰźŰ°Ù ŰȘŰŹŰČŰŠŰ© ŰŁŰłŰ§ŰłÙŠŰ© و قم ŰšŰ„Ù†ŰŽŰ§ŰĄ ŰȘŰŹŰČŰŠŰ© ممŰȘŰŻŰ©."
+"ŰźÙŠŰ§Ű±Ű§ŰȘÙ†Ű§ Ű§Ù„ÙƒŰ«ÙŠŰ± من Ű­Ù„ÙˆÙ„ Ù†ŰžŰ§Ù… Ù„ÙŠÙ†ÙƒŰł ŰšŰ§Ù„Ű„Ű¶Ű§ÙŰ© Ű§Ù„Ù‰ Ű§Ù„ŰčŰ±ÙˆŰ¶ Ű§Ù„ŰźŰ§Ű”Ű© و Ű§Ù„Ù…Ù†ŰȘۏۧŰȘ "
+"Ű§Ù„ŰŁŰźŰ±Ù‰Ù‰ مŰȘÙˆÙŰ±Ű© في مŰȘŰŹŰ±Ù†Ű§ Ű§Ù„ŰŁÙ„ÙƒŰȘŰ±ÙˆÙ†ÙŠ:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Preference: "
-msgstr "Ű§Ù„ŰȘÙŰ¶ÙŠÙ„: "
+msgid "access to administrative files"
+msgstr "Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ű„ŰŻŰ§Ű±Ű©"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Start sector: "
-msgstr "Ù‚Ű·Ű§Űč Ű§Ù„ŰšŰŻŰ§ÙŠŰ©: "
+msgid ""
+"Error during sendmail.\n"
+" Your report mail was not sent.\n"
+" Please configure sendmail"
+msgstr ""
+"۟۷ۣ ŰŁŰ«Ù†Ű§ŰĄ Ű§Ű±ŰłŰ§Ù„ Ű§Ù„ŰšŰ±ÙŠŰŻ.\n"
+" لم يŰȘم Ű§Ű±ŰłŰ§Ù„ ŰȘÙ‚Ű±ÙŠŰ± Ű§Ù„ŰšŰ±ÙŠŰŻ.\n"
+" ÙŰ¶Ù„Ű§Ù‹ قم ۚۄŰčۯۧۯ sendmail"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Create a new partition"
-msgstr "Ű§Ù†ŰŽŰŠ ŰȘŰŹŰČŰŠŰ© ŰŹŰŻÙŠŰŻŰ©"
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ", ŰŹÙ‡Ű§ŰČ Ù…ŰȘŰčŰŻŰŻ Ű§Ù„ÙˆŰžŰ§ŰŠÙ Űčلى Ű§Ù„Ù…Ù†ÙŰ° Ű§Ù„Ù…ŰȘÙˆŰ§ŰČي \\#%s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Use for loopback"
-msgstr "ۧ۳ŰȘŰźŰŻÙ… لـloopback"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
+msgstr ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Modify RAID"
-msgstr "ŰȘŰčŰŻÙŠÙ„ RAID"
+msgid "Montserrat"
+msgstr "مونŰȘŰłÙŠŰ±Ű§ŰȘ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Remove from LVM"
-msgstr "ۧŰČŰ§Ù„Ű© من LVM"
+msgid "Automatic dependencies"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Remove from RAID"
-msgstr "ۧŰČŰ§Ù„Ű© من RAID"
+msgid "Swap"
+msgstr "Ű§Ù„ŰȘŰšŰŻÙŠÙ„"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Add to LVM"
-msgstr "Ű§Ű¶Ű§ÙŰ© Ű§Ù„Ù‰ LVM"
+msgid "Connecting to the Internet "
+msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add to RAID"
-msgstr "Ű§Ű¶Ű§ÙŰ© Ű§Ù„Ù‰ RAID"
+msgid "Restore Other"
+msgstr "ۧ۳ŰȘŰčŰŻ ۹۟۱"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Format"
-msgstr "ŰȘÙ†ŰłÙŠÙ‚"
+msgid "TV card"
+msgstr "ŰšŰ·Ű§Ù‚Ű© Ű§Ù„ŰȘÙ„ÙŰ§ŰČ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Detailed information"
-msgstr "مŰčÙ„ÙˆÙ…Ű§ŰȘ Ù…ÙŰ”Ù‘Ù„Ű©"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "۷ۧۚŰčŰ© Űčلى ŰźŰ§ŰŻÙ… SMB/Windows 95/98/NT"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Trying to rescue partition table"
-msgstr "ŰŹŰ§Ű±ÙŠ Ù…Ű­Ű§ÙˆÙ„Ű© Ű§Ù†Ù‚Ű§Ű° ŰŹŰŻÙˆÙ„ Ű§Ù„ŰȘÙ‚ŰłÙŠÙ…"
+msgid ", "
+msgstr ", "
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
msgstr ""
-"ŰŁŰŻŰźÙ„ Ù‚Ű±Ű”Ű§ Ù…Ű±Ù†Ű§ في Ű§Ù„ŰłÙˆŰ§Ù‚Ű©\n"
-"كل Ű§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ Űčلى Ű§Ù„Ù‚Ű±Ű” ŰłŰȘÙ…Ű­Ù‰"
-
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Warning"
-msgstr "ŰȘŰ­Ű°ÙŠŰ±"
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select file"
-msgstr "ۧ۟ŰȘ۱ ملف"
+msgid "Remove selected host/network"
+msgstr "Ű§Ű­Ű°Ù Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ/Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…ŰźŰȘۧ۱۩"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
msgstr ""
-"ŰŹŰŻÙˆÙ„ Ű§Ù„ŰȘÙ‚ŰłÙŠÙ… Ű§Ù„Ù…Ű­ÙÙˆŰž Ù„ÙŠŰł ŰšÙ†ÙŰł Ű§Ù„Ű­ŰŹÙ…\n"
-"Ù„Ű§ ŰČلŰȘ ŰȘŰ±ÙŠŰŻ Ű§Ù„Ű„ÙƒÙ…Ű§Ù„ŰŸ"
+"Postfix هو Űčميل لنقل Ű§Ù„ŰšŰ±ÙŠŰŻ, ŰŁÙŠ Ű§Ù„ŰšŰ±Ù†Ű§Ù…ŰŹ Ű§Ù„Ű°ÙŠ ينقل Ű§Ù„ŰšŰ±ÙŠŰŻ من ŰŹÙ‡Ű§ŰČ Ű§Ù„Ù‰ ۹۟۱."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Removable media automounting"
-msgstr "Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„ Ű§Ù„ŰąÙ„ÙŠ Ù„Ù„ÙˆŰłŰ§ŰŠŰ· Ű§Ù„Ù‚Ű§ŰšÙ„Ű© Ù„Ù„Ű„ŰČŰ§Ù„Ű©"
+msgid "Disconnection from the Internet failed."
+msgstr "ÙŰŽÙ„ Ù‚Ű·Űč Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Reload partition table"
-msgstr "Ű„Űčۧۯ۩ ŰȘŰ­Ù…ÙŠÙ„ ŰŹŰŻÙˆÙ„ Ű§Ù„ŰȘÙ‚ŰłÙŠÙ…"
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
+msgstr ""
+"Ù‡Ù†Ű§ يمكنك ۧ۟ŰȘÙŠŰ§Ű± ۧ۟ŰȘ۔ۧ۱ۧŰȘ Ù„ÙˆŰ­Ű© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­ Ű§Ù„ŰȘي \n"
+"ŰłŰȘŰłÙ…Ű­ لك ŰšŰ§Ù„ŰȘŰšŰŻÙŠÙ„ ŰšÙŠÙ† لŰșۧŰȘ Ù„ÙˆŰ­Ű© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­ Ű§Ù„Ù…ŰźŰȘÙ„ÙŰ©\n"
+"(Ù…Ű«Ù„Ű§Ù‹: Ù„Ű§ŰȘيني و ŰșÙŠŰ± Ù„Ű§ŰȘيني)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Rescue partition table"
-msgstr "Ű„Ù†Ù‚Ű§Ű° ŰŹŰŻÙˆÙ„ Ű§Ù„ŰȘÙ‚ŰłÙŠÙ…"
+msgid "Network Hotplugging"
+msgstr "Network Hotplugging"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Restore partition table"
-msgstr "ۧ۳ŰȘŰčۧۯ۩ ŰŹŰŻÙˆÙ„ Ű§Ù„ŰȘÙ‚ŰłÙŠÙ…"
+msgid "if set to yes, reports check result to tty."
+msgstr "if set to yes, reports check result to tty."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Save partition table"
-msgstr "Ű­ÙŰž ŰŹŰŻÙˆÙ„ Ű§Ù„ŰȘÙ‚ŰłÙŠÙ…"
+msgid "Restore From CD"
+msgstr "ۧ۳ŰȘŰčۧۯ۩ من Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr "لكي ŰȘمŰȘلك ŰȘŰŹŰČۊۧŰȘ ŰŁÙƒŰ«Ű±, ÙŠŰ±ŰŹÙ‰ Ű§Ù„Űșۧۥ ŰȘŰŹŰČŰŠŰ© كي ŰȘŰȘمكن من Űčمل ŰȘŰŹŰČŰŠŰ© ممŰȘŰŻŰ©"
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
+msgstr ""
+"ŰŁÙ†ŰȘ Űčلى ÙˆŰŽÙƒ ŰȘÙ‡ÙŠŰŠŰ© ŰŹÙ‡Ű§ŰČك Ù„Ù…ŰŽŰ§Ű±ÙƒŰ© Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ.\n"
+"ۚۧ۳ŰȘŰźŰŻŰ§Ù… Ù‡Ű°Ù‡ Ű§Ù„Ù…ÙŠŰČŰ© ŰłÙŠÙ…ÙƒÙ† Ù„Ù„Ű­ÙˆŰ§ŰłÙŠŰš Ű§Ù„ŰŁŰźŰ±Ù‰ في Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ© ŰŁÙ† ŰȘŰłŰȘŰźŰŻÙ… ÙˆŰ”Ù„Ű© "
+"Ű§Ù„ÙƒÙ…ŰšÙŠÙˆŰȘ۱ Ù„Ù‡Ű°Ű§ Ű§Ù„Ű­Ű§ŰłÙˆŰš.\n"
+"\n"
+"ŰȘŰŁÙƒŰŻ من ŰŁÙ†Ùƒ قمŰȘ ŰšŰȘÙ‡ÙŠŰŠŰ© ÙˆŰ”Ù„Ű© Ű§Ù„ŰŽŰšÙƒŰ©/Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ ۚۧ۳ŰȘŰźŰŻŰ§Ù… drakconnect Ù‚ŰšÙ„ "
+"Ű§Ù„Ù…ŰȘۧۚŰčŰ©.\n"
+"\n"
+"Ù…Ù„Ű­ÙˆŰžŰ©: ŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ Ù…ÙˆŰ§ŰŠÙ… Ù„Ù„ŰŽŰšÙƒŰ© كي ŰȘقوم ۚۄŰčۯۧۯ Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ© (LAN)."
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "I can't add any more partition"
-msgstr "Ù„Ű§ يمكنني Ű§Ű¶Ű§ÙŰ© ŰŁÙŠ ŰȘŰŹŰČŰŠŰ© ŰŁŰźŰ±Ù‰"
+msgid ""
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr "ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ Ù…ÙˆŰ§ŰŠÙ… Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ Ű§Ù„Ű°ÙŠ ŰȘŰ±ÙŠŰŻ ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡ Ù„Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "All primary partitions are used"
-msgstr "كل Ű§Ù„ŰȘŰŹŰČۊۧŰȘ Ű§Ù„Ű±ŰŠÙŠŰłÙŠŰ© Ù…ŰłŰȘŰźŰŻÙ…Ű©"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr "Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű°Ű§ÙƒŰ±Ű© Űčلى ŰŹÙ‡Ű§ŰČ HP مŰȘŰčŰŻŰŻ Ű§Ù„ÙˆŰžŰ§ŰŠÙ"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Hard drive information"
-msgstr "مŰčÙ„ÙˆÙ…Ű§ŰȘ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš"
+#: ../../share/advertising/09-mdksecure.pl:1
+#, fuzzy, c-format
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
+"MandrakeSoft ŰȘŰčمل ŰŹÙ†ŰšŰ§Ù‹ Ű§Ù„Ù‰ ŰŹÙ†Űš مŰč ŰŁÙŰ¶Ù„ Ű§Ù„ŰŽŰ±ÙƒŰ§ŰȘ Ű§Ù„ŰȘي ŰȘÙˆÙŰ± Ű­Ù„ÙˆÙ„ Ù„Ű­ŰȘŰ±Ű§ÙÙŠŰ© "
+"مŰȘÙˆŰ§ÙÙ‚Ű© مŰč Mandrake Linux. ŰȘÙˆŰŹŰŻ Ù‚Ű§ŰŠÙ…Ű© ŰšÙ‡Ű€Ù„Ű§ŰĄ Ű§Ù„ŰŽŰ±ÙƒŰ§ŰĄ في MandrakeStore"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Auto allocate"
-msgstr "ŰȘŰ­ŰŻÙŠŰŻ ŰąÙ„ÙŠ"
+msgid "Internet Connection Sharing is now disabled."
+msgstr "Ù…ŰŽŰ§Ű±ÙƒŰ© ۧŰȘŰ”Ű§Ù„ Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ ŰșÙŠŰ± Ù…Ù…ÙƒÙ‘ÙŽÙ†Ű© Ű§Ù„ŰąÙ†."
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Clear all"
-msgstr "ŰŁÙ…ŰłŰ­ Ű§Ù„ÙƒÙ„"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr "if set to yes, verify checksum of the suid/sgid files."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "هل ŰȘŰ±ÙŠŰŻ Ű­ÙŰž ŰȘŰčŰŻÙŠÙ„Ű§ŰȘ /etc/fstab"
+msgid "Latin American"
+msgstr "Ű§Ù„ŰŁÙ…Ű±ÙŠÙƒÙŠŰ© Ű§Ù„Ù„Ű§ŰȘÙŠÙ†ÙŠŰ©"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "هل ŰȘŰ±ÙŠŰŻ Ű§Ù„ŰźŰ±ÙˆŰŹ ŰšŰŻÙˆÙ† كŰȘۧۚ۩ ŰŹŰŻÙˆÙ„ Ű§Ù„ŰȘÙ‚ŰłÙŠÙ…ŰŸ"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Japanese text printing mode"
+msgstr "ŰȘŰșÙŠÙŠŰ± Ù†ŰžŰ§Ù… Ű§Ù„Ű·ŰšŰ§ŰčŰ©"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Quit without saving"
-msgstr "Ű§Ù„ŰźŰ±ÙˆŰŹ ŰšŰŻÙˆÙ† Ű§Ù„Ű­ÙŰž"
+msgid "Old device file"
+msgstr "ملف Ű§Ù„ŰŹÙ‡Ű§ŰČ Ű§Ù„Ù‚ŰŻÙŠÙ…"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Continue anyway?"
-msgstr "هل ŰȘŰ±ÙŠŰŻ Ű§Ù„Ű§ÙƒÙ…Ű§Ù„ Űčلى ŰŁÙŠ Ű­Ű§Ù„ŰŸ"
+msgid "Info: "
+msgstr "مŰčÙ„ÙˆÙ…Ű§ŰȘ: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Toggle to expert mode"
-msgstr "Ű§Ù„Ù†ŰȘÙ‚Ű§Ù„ Ű§Ù„Ù‰ ÙˆŰ¶ŰčÙŠŰ© Ű§Ù„ŰźŰšÙŠŰ±"
+msgid "Button `%s': %s"
+msgstr "Button `%s': %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Toggle to normal mode"
-msgstr "Ű§Ù„Ű§Ù†ŰȘÙ‚Ű§Ù„ Ű§Ù„Ù‰ Ű§Ù„ÙˆŰ¶Űč Ű§Ù„ŰčŰ§ŰŻÙŠ"
+msgid "Please wait"
+msgstr "من ÙŰ¶Ù„Ùƒ Ű§Ù†ŰȘ۞۱"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Undo"
-msgstr "ŰȘ۱ۧۏŰč"
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Exit"
-msgstr "ŰźŰ±ÙˆŰŹ"
+msgid "None"
+msgstr "ÙˆÙ„Ű§ ŰŽŰŠ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose a partition"
-msgstr "Ű„ŰźŰȘ۱ ŰȘŰŹŰČŰŠŰ©"
+msgid "The entered IP is not correct.\n"
+msgstr "ŰčÙ†ÙˆŰ§Ù† IP Ű§Ù„Ù…ŰŻÙŰźÙ„ ŰșÙŠŰ± Ű”Ű­ÙŠŰ­.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose another partition"
-msgstr "Ű„ŰźŰȘ۱ ێۧێ۩"
+msgid "Ethernet Card"
+msgstr "Ethernet Card"
-#: ../../diskdrake/removable.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Change type"
-msgstr "ŰșÙŠÙ‘Ű± Ű§Ù„Ù†ÙˆŰč"
+msgid "Info"
+msgstr "Ű§Ù„Ù…ŰčÙ„ÙˆÙ…Ű§ŰȘ"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Search servers"
-msgstr "ۭۧۚ۫ في ŰŁŰŹÙ‡ŰČŰ© Ű§Ù„ŰźŰ§ŰŻÙ…"
+msgid "Install"
+msgstr "Ű«ŰšÙ‘ŰȘ"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Domain"
-msgstr "Ű§Ù„Ù†Ű·Ű§Ù‚"
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr ""
+"ۧ۶ŰșŰ· \"%s\" ۧ۰ۧ كنŰȘ ŰȘŰ±ÙŠŰŻ Ű­Ű°Ù كل Ű§Ù„ŰȘŰŹŰČۊۧŰȘ Ű§Ù„Ù…ÙˆŰŹÙˆŰŻŰ© Űčلى Ű§Ù„Ù‚Ű±Ű”\n"
+"Ű§Ù„Ű”Ù„Űš. ۟۰ Ű­Ű°Ű±Ùƒ, ŰšŰčŰŻ Ù†Ù‚Ű±Ùƒ لŰČ۱ \"%s\" لن ŰȘŰȘمكن من ۧ۳ŰȘŰčۧۯ۩\n"
+"ŰŁÙŠ ŰšÙŠŰ§Ù†Ű§ŰȘ ŰŁÙˆ ŰȘŰŹŰČۊۧŰȘ ÙƒŰ§Ù†ŰȘ Ù…ÙˆŰŹÙˆŰŻŰ© Űčلى Ù‡Ű°Ű§ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš.\n"
+"ŰšÙ…Ű§ ÙÙŠÙ‡Ű§ ŰšÙŠŰ§Ù†Ű§ŰȘ Windows\n"
+"Ű§Ù†Ù‚Ű± \"%s\" Ù„Ű„ÙŠÙ‚Ű§Ù Ù‡Ű°Ù‡ Ű§Ù„ŰčÙ…Ù„ÙŠŰ© ŰŻÙˆÙ† ۟۳ۧ۱۩ ŰŁÙŠ ŰšÙŠŰ§Ù†Ű§ŰȘ ŰŁÙˆ ŰȘŰŹŰČۊۧŰȘ\n"
+"Ù…ÙˆŰŹÙˆŰŻŰ© Űčلى Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš."
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Username"
-msgstr "Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…"
+msgid "Exit install"
+msgstr "Ű§Ù„ŰźŰ±ÙˆŰŹ من Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Please enter your username, password and domain name to access this host."
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
msgstr ""
-"ÙŰ¶Ù„Ű§Ù‹ ŰŁŰŻŰźÙ„ Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…, ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ± و Ű§Ù„Ù†Ű·Ű§Ù‚ Ű§Ù„ŰźŰ§Ű” ŰšÙƒ Ù„Ù„ŰŻŰźÙˆÙ„ Ű§Ù„Ù‰ Ù‡Ű°Ű§ "
-"Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ."
+"ŰȘم Ű„Űčۯۧۯ كل ŰŽŰŠ.\n"
+"يمكنك Ű§Ù„ŰąÙ† Ù…ŰŽŰ§Ű±ÙƒŰ© ۧŰȘŰ”Ű§Ù„ Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ مŰč Ű§Ù„ŰŁŰŹÙ‡ŰČŰ© Ű§Ù„ŰŁŰźŰ±Ù‰ في ŰŽŰšÙƒŰȘك Ű§Ù„Ù…Ű­Ù„ÙŠŰ© ۚۧ۳ŰȘŰźŰŻŰ§Ù… "
+"Ű„Űčۯۧۯ Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„ŰŁÙˆŰȘÙˆÙ…Ű§ŰȘيكي (DHCP)."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Domain Authentication Required"
-msgstr "Domain Authentication Required"
+msgid "Remote CUPS server"
+msgstr "ŰźŰ§ŰŻÙ… CUPS ŰšŰčÙŠŰŻ"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Another one"
-msgstr "۹۟۱"
+msgid "Sun - Mouse"
+msgstr "Sun - Mouse"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Which username"
-msgstr "ŰŁÙŠ Ű§ŰłÙ… Ù…ŰłŰȘŰźŰŻÙ…"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
+msgstr ""
+"ÙŠÙˆŰŹŰŻ Ù…ÙˆŰ§ŰŠÙ… ŰŽŰšÙƒŰ© ÙˆŰ§Ű­ŰŻ ÙÙ‚Ű· مŰčŰŻÙ‘ Űčلى Ù†ŰžŰ§Ù…Ùƒ:\n"
+"\n"
+"%s\n"
+"\n"
+"Ù†Ű­Ù† Űčلى ÙˆŰŽÙƒ ۧŰčۯۧۯ Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ© ۚۧ۳ŰȘŰźŰŻŰ§Ù… Ù‡Ű°Ű§ Ű§Ù„Ù…ÙˆŰ§ŰŠÙ…."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Can't login using username %s (bad password?)"
-msgstr "ŰȘŰč۰۱ Ű§Ù„ŰŻŰźÙˆÙ„ ۚۧ۳ŰȘŰźŰŻŰ§Ù… Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… %s (ÙƒÙ„Ù…Ű© Ù…Ű±ÙˆŰ± ŰłÙŠŰŠŰ©ŰŸ)"
+msgid "Minimal install"
+msgstr "ŰȘŰ«ŰšÙŠŰȘ Ù…Ű”ŰșÙ‘Ű±"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "cpu # "
-msgstr "cpu # "
+msgid "Ethiopia"
+msgstr "Ű§Ű«ÙŠÙˆŰšÙŠŰ§"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "SMBus controllers"
-msgstr "مŰȘŰ­ÙƒÙ…Ű§ŰȘ SMBus"
+msgid "Devanagari"
+msgstr "ŰŻÙŠÙŰ§Ù†ŰșŰ§Ű±ÙŠ"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "USB controllers"
-msgstr "مŰȘŰ­ÙƒÙ…Ű§ŰȘ USB"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr ""
+"- ŰŁŰŹÙ‡ŰČŰ© pci: ŰȘŰčŰ·ÙŠ Ù…Ù†ÙŰ° PCI, Ű§Ù„ŰŹÙ‡Ű§ŰČ Ùˆ ÙˆŰžÙŠÙŰ© Ù‡Ű°Ù‡ Ű§Ù„ŰšŰ·Ű§Ù‚Ű©\n"
+"- ŰŁŰŹÙ‡ŰČŰ© eide: Ű§Ù„ŰŹÙ‡Ű§ŰČ Ű„Ù…Ű§ ŰŁÙ† يكون ŰŹÙ‡Ű§ŰČ slave ŰŁÙˆ master\n"
+"- ŰŁŰŹÙ‡ŰČŰ© scsi: scsi bus و Ù‡ÙˆÙŠŰ© ŰŹÙ‡Ű§ŰČ scsi"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "SCSI controllers"
-msgstr "مŰȘŰ­ÙƒÙ…Ű§ŰȘ SCSI"
+msgid "Total size: %d / %d MB"
+msgstr "Ű§Ù„Ű­ŰŹÙ… Ű§Ù„Ű„ŰŹÙ…Ű§Ù„ÙŠ: %d / %d ميŰșŰ§ŰšŰ§ÙŠŰȘ"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Firewire controllers"
-msgstr "مŰȘŰ­ÙƒÙ…Ű§ŰȘ Firewire"
+msgid "disabled"
+msgstr "مŰčŰ·Ù„"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "مŰȘŰ­ÙƒÙ…Ű§ŰȘ (E)IDE/ATA"
+msgid "Search for new scanners"
+msgstr "Ű§Ù„ŰšŰ­Ű« Űčن Ù…Ű§ŰłŰ­Ű§ŰȘ Ű¶ÙˆŰŠÙŠŰ© ŰŹŰŻÙŠŰŻŰ©..."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Joystick"
-msgstr "Űč۔ۧ Ű§Ù„ŰŁÙ„Űčۧۚ"
+msgid "Disabling servers..."
+msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰčŰ·ÙŠÙ„ Ű§Ù„ŰźÙˆŰ§ŰŻÙ…..."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Scanner"
-msgstr "Ű§Ù„Ù…Ű§ŰłŰ­ Ű§Ù„Ű¶ÙˆŰŠÙŠ"
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr ""
+"ÙŰ¶Ù„Ű§ ۧ۟ŰȘ۱ Ű§Ù„ÙŰȘ۱۩ \n"
+"Ù…Ű§ ŰšÙŠÙ† كل ŰčÙ…Ù„ÙŠŰ© Ù†ŰłŰź ۭۧŰȘÙŠŰ§Ű·ÙŠ"
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Unknown/Others"
-msgstr "ŰșÙŠŰ± مŰčŰ±ÙˆÙ/ŰŁŰźŰ±Ù‰"
+msgid "Installation of %s failed. The following error occured:"
+msgstr "ÙŰŽÙ„ ŰȘŰ«ŰšÙŠŰȘ %s. ŰžÙ‡Ű± Ű§Ù„ŰźŰ·ŰŁ Ű§Ù„ŰȘŰ§Ù„ÙŠ:"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Bridges and system controllers"
-msgstr "مŰȘŰ­ÙƒÙ…Ű§ŰȘ Ű§Ù„Ù†ŰžŰ§Ù…"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr "ŰȘŰč۰۱ ŰȘŰŽŰșيل mkinitrd -f /boot/initrd-%s.img %s."
-#: ../../harddrake/data.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Modem"
-msgstr "Ű§Ù„Ù…ÙˆŰŻÙ…"
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
+msgstr ""
+"Ù„Ù‚ŰŻ ۧ۟ŰȘ۱ŰȘ Ű§Ù„ŰźŰ§ŰŻÙ…Ű§ŰȘ Ű§Ù„ŰȘŰ§Ù„ÙŠŰ©: %s\n"
+"\n"
+"\n"
+"Ù‡Ű°Ù‡ Ű§Ù„ŰźŰ§ŰŻÙ…Ű§ŰȘ مفŰčÙ‘Ù„Ű© Ű§ÙŰȘŰ±Ű§Ű¶ÙŠŰ§Ù‹, و Ù„Ű§ ÙŠÙˆŰŹŰŻ لهم Ù…ŰŽŰ§ÙƒÙ„ ŰŁÙ…Ù†ÙŠŰ©\n"
+"مŰčŰ±ÙˆÙŰ©, و لكن Ù‚ŰŻ ŰȘكŰȘŰŽÙ ŰšŰč۶ Ű§Ù„Ù…ŰŽŰ§ÙƒÙ„ Ű§Ù„ŰŹŰŻÙŠŰŻŰ©. في Ù‡Ű°Ù‡ Ű§Ù„Ű­Ű§Ù„Ű©, ŰȘŰŁÙƒŰŻ من ŰŁÙ†\n"
+"ŰȘقوم ŰšŰ§Ù„ŰȘŰ±Ù‚ÙŠŰ© في ŰŁÙ‚Ű±Űš وقŰȘ ممكن.\n"
+"\n"
+"\n"
+"هل ŰŁÙ†ŰȘ مŰȘŰŁÙƒŰŻ ŰŁÙ†Ùƒ ŰȘŰ±ÙŠŰŻ ŰȘŰ«ŰšÙŠŰȘ Ù‡Ű°Ù‡ Ű§Ù„ŰźŰ§ŰŻÙ…Ű§ŰȘ Ű§Ù„ŰąÙ†ŰŸ\n"
-#: ../../harddrake/data.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Ethernetcard"
-msgstr "ŰšŰ·Ű§Ù‚Ű© Ű§ÙŠŰ«Ű±Ù†ŰȘ"
+msgid "Network printer (TCP/Socket)"
+msgstr "۷ۧۚŰčŰ© ŰŽŰšÙƒŰ© (TCP/Socket)"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Processors"
-msgstr "Ű§Ù„Ù…ŰčŰ§Ù„ŰŹŰ§ŰȘ"
+msgid "Backup User files..."
+msgstr "Ű§Ù†ŰłŰź Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…ÙŠÙ†..."
-#: ../../harddrake/data.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Webcam"
-msgstr "ÙƒŰ§Ù…ÙŠŰ±Ű§ŰȘ Ű§Ù„ÙˆÙŠŰš"
+msgid "Install system"
+msgstr "ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ù†ŰžŰ§Ù…"
-#: ../../harddrake/data.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Soundcard"
-msgstr "ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű”ÙˆŰȘ"
+msgid "First DNS Server (optional)"
+msgstr "ŰźŰ§ŰŻÙ… DNS Ű§Ù„ŰŁÙˆÙ„ (ۧ۟ŰȘÙŠŰ§Ű±ÙŠ)"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Other MultiMedia devices"
-msgstr "ŰŁŰŹÙ‡ŰČ ÙˆŰłŰ§ŰŠŰ· مŰȘŰčŰŻŰŻŰ© ŰŁŰźŰ±Ù‰"
+msgid ""
+"Alternatively, you can specify a device name/file name in the input line"
+msgstr "ŰšŰŻÙ„Ű§Ù‹ من Ű°Ù„Ùƒ, يمكنك ŰȘŰ­ŰŻÙŠŰŻ Ű§ŰłÙ… ŰŹÙ‡Ű§ŰČ/Ű§ŰłÙ… ملف في Ű­Ù‚Ű§ Ű§Ù„Ű„ŰŻŰźŰ§Ù„"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Tvcard"
-msgstr "ŰšŰ·Ű§Ù‚Ű© Ű§Ù„ŰȘÙ„ÙŰ§ŰČ"
+msgid "dhcpd Config..."
+msgstr "ŰȘÙ‡ÙŠŰŠŰ© dhcpd..."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Videocard"
-msgstr "ŰšŰ·Ű§Ù‚Ű© Ű§Ù„ÙÙŠŰŻÙŠÙˆ"
+msgid "The setup has already been done, but it's currently disabled."
+msgstr "ŰȘم Űčمل Ű§Ù„ŰȘÙ†Ű”ÙŠŰš, و لكنه ŰșÙŠŰ± ممكَّن Ű§Ù„ŰąÙ†"
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Tape"
-msgstr "ŰŽŰ±ÙŠŰ· Ű§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ"
+msgid "LILO/grub Installation"
+msgstr "ŰȘŰ«ŰšÙŠŰȘ LILO/grub"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
+msgid "Israeli"
+msgstr "Ű§Ù„ŰčŰšŰ±ÙŠŰ©"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "CD/DVD burners"
-msgstr "ŰŁŰŹÙ‡ŰČŰ© Ù†ŰłŰź CD/DVD"
+msgid "load setting"
+msgstr "Ű­Ù…Ù„ Ű§Ù„Ű„ŰčۯۧۯۧŰȘ"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "CDROM"
-msgstr "Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹ"
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "Ű§Ù„Ű·Ű§ŰšŰčŰ© \"%s\" Űčلى Ű§Ù„ŰźŰ§ŰŻÙ… \"%s\""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Disk"
-msgstr "Ű§Ù„Ù‚Ű±Ű”"
+msgid "Floppy can be removed now"
+msgstr "يمكن ۧŰČŰ§Ù„Ű© Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…Ű±Ù† Ű§Ù„ŰąÙ†"
-#: ../../harddrake/data.pm:1
-#, c-format
-msgid "Zip"
-msgstr "Zip"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Truly minimal install"
+msgstr "ŰȘŰ«ŰšÙŠŰȘ Ù…Ű”ŰșÙ‘Ű±"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Floppy"
-msgstr "Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…Ű±Ù†"
+msgid "Denmark"
+msgstr "Ű§Ù„ŰŻÙ†Ù…Ű§Ű±Ùƒ"
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Let me pick any driver"
-msgstr "Ű§ŰłÙ…Ű­ لي ŰŁÙ† ŰŁŰźŰȘۧ۱ Ù…ŰŽŰșل"
+msgid "Moving partition..."
+msgstr "ŰŹŰ§Ű±ÙŠ نقل Ű§Ù„ŰȘŰŹŰČŰŠŰ©..."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Driver:"
-msgstr "Ű§Ù„Ù…ŰŽŰșل:"
+msgid "(This) DHCP Server IP"
+msgstr "ŰčÙ†ÙˆŰ§Ù† IP Ù„ŰźŰ§ŰŻÙ… DHCP (Ù‡Ű°Ű§)"
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
-"ۧ۰ۧ كنŰȘ ŰȘŰčŰȘÙ‚ŰŻ فŰčÙ„Ű§Ù‹ ŰŁÙ†Ùƒ ŰȘŰčŰ±Ù Ù…Ű§ هو Ű§Ù„Ù…ŰŽŰșل Ű§Ù„Ű”Ű­ÙŠŰ­ Ù„ŰšŰ·Ű§Ù‚ŰȘك\n"
-"يمكنك ۧ۟ŰȘÙŠŰ§Ű±Ù‡ من Ű§Ù„Ù‚Ű§ŰŠÙ…Ű© ŰŁŰčÙ„Ű§Ù‡.\n"
-"\n"
-"Ű§Ù„Ù…ŰŽŰșل Ű§Ù„Ű­Ű§Ù„ÙŠ Ù„ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű”ÙˆŰȘ \"%s\" Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙƒ هو \"%s\" "
+msgid "Test of the configuration"
+msgstr "ۧ۟ŰȘۚۧ۱ Ű§Ù„Ű„Űčۯۧۯ"
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr "ŰŹŰ§Ű±ÙŠ ۧ۟ŰȘÙŠŰ§Ű± Ù…ŰŽŰșل ŰčŰ§Ù…"
+msgid "Installing %s ..."
+msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰ«ŰšÙŠŰȘ %s ..."
-#: ../../harddrake/sound.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
msgstr ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
-
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Sound trouble shooting"
-msgstr "Ű­Ù„ Ù…ŰŽŰ§ÙƒÙ„ Ű§Ù„Ű”ÙˆŰȘ"
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "۟۷ۣ: Ù…ŰŽŰșل \"%s\" Ù„ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű”ÙˆŰȘ Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙƒ ŰșÙŠŰ± Ù…ÙˆŰŹÙˆŰŻ في Ű§Ù„Ù‚Ű§ŰŠÙ…Ű©"
+msgid "Choose your filesystem encryption key"
+msgstr "ۧ۟ŰȘ۱ مفŰȘۭۧ ŰȘŰŽÙÙŠŰ± Ù†ŰžŰ§Ù… Ű§Ù„Ù…Ù„ÙŰ§ŰȘ"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unkown driver"
-msgstr "Ù…ŰŽŰșل ŰșÙŠŰ± مŰčŰ±ÙˆÙ"
+msgid ""
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
+msgstr ""
+"ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ ŰŹÙ‡Ű§ŰČ CD/DVD Ű§Ù„ŰźŰ§Ű” ŰšÙƒ\n"
+"(ۧ۶ŰșŰ· Ű§ŰŻŰźŰ§Ù„ Ù„Ù†ŰŽŰ± Ű§Ù„Ű„ŰčۯۧۯۧŰȘ Ù„Ű­Ù‚ÙˆÙ„ ŰŁŰźŰ±Ù‰.\n"
+"Ù‡Ű°Ű§ Ű§Ù„Ű­Ù‚Ù„ Ù„ÙŠŰł Ű¶Ű±ÙˆŰ±ÙŠŰ§Ù‹, Ű§Ù†Ù‡ Ù…ŰŹŰ±ŰŻ ۣۯۧ۩ Ù„Ù…Ù„ŰĄ Ű§Ù„Ű„ŰłŰȘÙ…Ű§Ű±Ű©.)"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "Ù„Ű§ ÙŠÙˆŰŹŰŻ Ù…ŰŽŰșل مŰčŰ±ÙˆÙ Ù„ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű”ÙˆŰȘ (%s)"
+msgid "Andorra"
+msgstr "ŰŁÙ†ŰŻÙˆŰ±Ű§"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No known driver"
-msgstr "Ù„Ű§ ÙŠÙˆŰŹŰŻ Ù…ŰŽŰșل مŰčŰ±ÙˆÙ"
+msgid "Sierra Leone"
+msgstr "ŰłÙŠŰ±Ű§Ù„ÙŠÙˆÙ†"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-"Ù„Ű§ ÙŠÙˆŰŹŰŻ Ù…ŰŽŰșل مفŰȘÙˆŰ­ Ű§Ù„Ù…Ű”ŰŻŰ± Ù„ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű”ÙˆŰȘ (%s), لكن Ù‡Ù†Ű§Ùƒ Ù…ŰŽŰșل ŰȘŰŹŰ§Ű±ÙŠ في \"%s\"."
+msgid "Botswana"
+msgstr "ŰšÙˆŰȘŰłÙˆŰ§Ù†Ű§"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "No open source driver"
-msgstr "Ù„Ű§ ÙŠÙˆŰŹŰŻ Ù…ŰŽŰșل مفŰȘÙˆŰ­ Ű§Ù„Ù…Ű”ŰŻŰ±"
+msgid "(default value: %s)"
+msgstr "(Ű§Ù„Ù‚ÙŠÙ…Ű© Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠŰ©: %s)"
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "ÙŠŰ±ŰŹÙ‰ Ű§Ù„Ű„Ù†ŰȘ۞ۧ۱... ŰŹŰ§Ű±ÙŠ ŰȘŰ·ŰšÙŠÙ‚ Ű§Ù„Ű„ŰčۯۧۯۧŰȘ"
+msgid "Alternative test page (Letter)"
+msgstr "Ű”ÙŰ­Ű© ۧ۟ŰȘŰšŰ§Ű±ÙŠŰ© ŰšŰŻÙŠÙ„Ű© (Letter)"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"The old \"%s\" driver is blacklisted.\n"
+"DHCP Server Configuration.\n"
"\n"
-"It has been reported to oops the kernel on unloading.\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-"Ù…ŰŽŰșل \"%s\" Ű§Ù„Ù‚ŰŻÙŠÙ… Űčلى Ű§Ù„Ù‚Ű§ŰŠÙ…Ű© Ű§Ù„ŰłÙˆŰŻŰ§ŰĄ.\n"
+"ŰȘÙ‡ÙŠŰŠŰ© ŰźŰ§ŰŻÙ… DHCP.\n"
"\n"
-"في ŰšŰč۶ Ű§Ù„Ű­Ű§Ù„Ű§ŰȘ قيل ŰŁÙ†Ù‡ ÙŠŰłŰšŰš Ű§Ù†Ù‡ÙŠŰ§Ű± في Ű§Ù„Ù†ÙˆŰ§Ű© ŰčÙ†ŰŻ ۧŰČŰ§Ù„Ű© Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„.\n"
+"Ù‡Ù†Ű§ يمكنك ۧ۟ŰȘÙŠŰ§Ű± ŰźÙŠŰ§Ű±Ű§ŰȘ Ù…ŰźŰȘÙ„ÙŰ© لŰȘÙ‡ÙŠŰŠŰ© ŰźŰ§ŰŻÙ… DHCP.\n"
+"ۧ۰ۧ لم ŰȘكن نهلم Ù…Ű§Ű°Ű§ يŰčني Ű§Ù„ŰźÙŠŰ§Ű± فكل Ù…Ű§ Űčليك هو ŰȘŰ±ÙƒÙ‡ ÙƒÙ…Ű§ هو.\n"
"\n"
-"Ù…ŰŽŰșل \"%s\" Ű§Ù„ŰŹŰŻÙŠŰŻ ŰłÙŠŰȘم ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡ ŰčÙ†ŰŻ ŰȘŰŽŰșيل Ű§Ù„ŰŹÙ‡Ű§ŰČ ÙÙŠ Ű§Ù„Ù…Ű±Ű© Ű§Ù„Ù‚Ű§ŰŻÙ…Ű©."
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Trouble shooting"
-msgstr "Ű­Ù„ Ű§Ù„Ù…ŰŽŰ§ÙƒÙ„"
+msgid "Choose an X server"
+msgstr "Ű„ŰźŰȘ۱ ŰźŰ§ŰŻÙ… X"
-#: ../../harddrake/sound.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
-msgstr ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
+msgid "Swap partition size in MB: "
+msgstr "Ű­ŰŹÙ… ŰȘŰŹŰČŰŠŰ© Ű§Ù„ŰȘŰšŰŻÙŠÙ„ ŰšŰ§Ù„Ù…ÙŠŰșŰ§ŰšŰ§ÙŠŰȘ"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
+"Other (not drakbackup)\n"
+"keys in place already"
msgstr ""
-"\n"
-"\n"
-"ŰšŰ·Ű§Ù‚ŰȘك ŰȘŰłŰȘŰźŰŻÙ… Ű§Ù„Ù…ŰŽŰșل %s\"%s\" Ű­Ű§Ù„ÙŠŰ§Ù‹ (Ű§Ù„Ù…ŰŽŰșل Ű§Ù„Ű­Ű§Ù„ÙŠ Ù„ŰšŰ·Ű§Ù‚ŰȘك هو \"%s\")"
+"Ù…ÙŰ§ŰȘÙŠŰ­ ŰŁŰźŰ±Ù‰\n"
+"(ŰșÙŠŰ± drakbackup) Ù…ÙˆŰŹÙˆŰŻŰ© Ù…ŰłŰšÙ‚Ű§Ù‹"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr "يمكنك Ù‡Ù†Ű§ ۧ۟ŰȘÙŠŰ§Ű± Ù…ŰŽŰșل ŰšŰŻÙŠÙ„ (ALSA ŰŁÙˆ OSS) Ù„ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű”ÙˆŰȘ (%s)."
+msgid "No changes to backup!"
+msgstr "Ù„Ű§ ŰȘŰșÙŠÙŠŰ±Ű§Ù† Ù„Ù„Ù†ŰłŰźŰ© Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠŰ©!"
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sound configuration"
-msgstr "ۧŰčۯۧۯۧŰȘ Ű§Ù„Ű”ÙˆŰȘ"
+msgid "Formatted\n"
+msgstr "Ù…ŰŹÙ‡ŰČ\n"
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
-msgstr "Ù„Ű§ ÙŠÙˆŰŹŰŻ Ù…ŰŽŰșل ŰšŰŻÙŠÙ„ (ALSA ŰŁÙˆ OSS) Ù„ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű”ÙˆŰȘ (%s) Ű§Ù„ŰȘي ŰȘŰłŰȘŰźŰŻÙ… \"%s\""
+msgid "Type of install"
+msgstr "نوŰč Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ"
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No alternative driver"
-msgstr "Ù„Ű§ Ù…ŰŽŰșل ŰšŰŻÙŠÙ„"
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "Ű§Ù„Ű·Ű§ŰšŰčŰ© \"%s\" Űčلى ŰźŰ§ŰŻÙ… SMB/Windows \"%s\""
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "enable radio support"
-msgstr "ŰȘمكين ŰŻŰčم Ű§Ù„Ű±Ű§ŰŻÙŠÙˆ"
+msgid ""
+"\n"
+"- Daemon (%s) include:\n"
+msgstr ""
+"\n"
+"- Daemon (%s) include :\n"
-#: ../../harddrake/v4l.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Radio support:"
-msgstr "ŰŻŰčم Ű§Ù„Ű±Ű§ŰŻÙŠÙˆ:"
+msgid "%d comma separated numbers"
+msgstr "%d ŰŁŰ±Ù‚Ű§Ù… Ù…ÙŰ”ÙˆÙ„Ű© ŰšŰ§Ù„ÙŰ§Ű”Ù„Ű©"
-#: ../../harddrake/v4l.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "PLL setting:"
-msgstr "ۧŰčۯۧۯ PLL:"
+msgid ""
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
+msgstr ""
+"ŰšŰ±ÙˆŰȘوكول rusers ÙŠŰłÙ…Ű­ Ù„Ù„Ù…ŰłŰȘŰźŰŻÙ…ÙŠÙ† Űčلى Ű§Ù„ŰŽŰšÙƒŰ© ŰŁÙ† يŰȘŰčŰ±ÙÙˆŰ§ Űčلى من\n"
+"ŰłŰŹÙ„ Ű§Ù„ŰŻŰźÙˆÙ„ Ű§Ù„Ù‰ Ű§Ù„ŰŁŰŹÙ‡ŰČŰ© Ű§Ù„Ù…ŰłŰȘŰŹÙŠŰšŰ© Ű§Ù„ŰŁŰźŰ±Ù‰."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr "number of capture buffers for mmap'ed capture"
+msgid "Automatic Steps Configuration"
+msgstr "ŰȘÙ‡ÙŠŰŠŰ© ŰąÙ„ÙŠŰ© Ù„Ù„ŰźŰ·ÙˆŰ§ŰȘ"
-#: ../../harddrake/v4l.pm:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Number of capture buffers:"
-msgstr "Number of capture buffers:"
+msgid ""
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
+msgstr ""
+"هل ŰȘŰ±ÙŠŰŻ مŰčŰ±ÙŰ© Ű§Ù„Ù…ŰČÙŠŰŻ Űčن Ù…ŰŹŰȘمŰč Ű§Ù„Ù…Ű”Ű§ŰŻŰ± Ű§Ù„Ù…ÙŰȘÙˆŰ­Ű©ŰŸ كن ŰŹŰČŰĄŰ§Ù‹ من ŰčŰ§Ù„Ù… Ű§Ù„ŰšŰ±Ù…ŰŹÙŠŰ§ŰȘ "
+"Ű§Ù„Ű­Ű±Ű©"
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Tuner type:"
-msgstr "نوŰč Ű§Ù„ŰȘÙˆÙ†Ű±:"
+msgid "Barbados"
+msgstr "ŰšŰ§Ű±ŰšŰ§ŰŻÙˆŰł"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Card model:"
-msgstr "نوŰč Ű§Ù„ŰšŰ·Ű§Ù‚Ű©"
+msgid "Please select data to backup..."
+msgstr "۱ۏۧۥ ۧ۟ŰȘ۱ Ű§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„Ù…Ű·Ù„ÙˆŰš Ù†ŰłŰźÙ‡Ű§ ۭۧŰȘÙŠŰ§Ű·ÙŠŰ§..."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
msgstr ""
-"Ù„ŰŁŰșÙ„Űš ŰšŰ·Ű§Ù‚Ű§ŰȘ Ű§Ù„ŰȘÙ„ÙŰ§ŰČ Ű§Ù„Ű­ŰŻÙŠŰ«Ű©, ÙˆŰ­ŰŻŰ© bttv Ù„Ù†ÙˆŰ§Ű© Ù„ÙŠÙ†ÙƒŰł ÙŠÙ…ÙƒÙ†Ù‡Ű§ Ű§Ù„ŰȘŰ­Ù‚Ù‚ ŰąÙ„ÙŠŰ§Ù‹ من "
-"Ű§Ù„Ù…ŰčŰ§Ù…Ù„Ű§ŰȘ Ű§Ù„Ű”Ű­ÙŠŰ­Ű©.\n"
-"ۧ۰ۧ ŰȘم Ű§Ù„ŰȘŰčŰ±Ù Űčلى Ű§Ù„ŰšŰ·Ű§Ù‚Ű© ŰšŰŽÙƒÙ„ ۟ۧ۷ۊ, يمكنك Ű§ŰŻŰźŰ§Ù„ Ű§Ù„ŰȘÙˆÙ†Ű± و نوŰč Ű§Ù„ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű”Ű­ÙŠŰ­ "
-"Ù‡Ù†Ű§. ÙÙ‚Ű· ۧ۟ŰȘ۱ Ű§Ù„Ù…ŰčŰ§Ù…Ù„Ű§ŰȘ Ű§Ù„Ù…Ù†Ű§ŰłŰšŰ© Ù„ŰšŰ·Ű§Ù‚Ű© Ű§Ù„ŰŽŰ§ŰŽŰ©."
+"ÙŰŽÙ„ Ű§Ù„Ű„ŰȘŰ”Ű§Ù„.\n"
+"ŰȘŰŁÙƒŰŻ من Ű§Ù„ÙˆŰ”Ù„Ű© في Ù…Ű±ÙƒŰČ ŰȘŰ­ÙƒÙ… Mandrake."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Unknown|Generic"
-msgstr "ŰșÙŠŰ± مŰčŰ±ÙˆÙ|ŰčŰ§Ù…"
+msgid "received"
+msgstr "Ù…ÙŰłŰȘÙ‚ŰšÙ„Ű©"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "ŰșÙŠŰ± مŰčŰ±ÙˆÙ|CPH06X (bt878) [Ù…Ű”Ù†Űčون ÙƒŰ«ÙŠŰ±ÙˆÙ†]"
+msgid "/File/_New"
+msgstr "/ملف/_ŰŹŰŻÙŠŰŻ"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "ŰșÙŠŰ± مŰčŰ±ÙˆÙ|CPH05X (bt878) [Ù…Ű”Ù†Űčون ÙƒŰ«ÙŠŰ±ÙˆÙ†]"
+msgid "The DNS Server IP"
+msgstr "ŰčÙ†ÙˆŰ§Ù† IP Ù„ŰźŰ§ŰŻÙ… DNS"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detect"
-msgstr "ŰȘŰ­Ù‚Ù‚ ŰąÙ„ÙŠ"
+msgid "IP Range End:"
+msgstr "IP Range End:"
-#: ../../interactive/newt.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Do"
-msgstr "Ű§ÙŰčل"
+msgid "High"
+msgstr "Ù…Ű±ŰȘفŰč"
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Your choice? (default %s) "
-msgstr "ۧ۟ŰȘÙŠŰ§Ű±Ùƒ ? (default %s) "
+msgid "NoVideo"
+msgstr "Ù„Ű§ ÙÙŠŰŻÙŠÙˆ"
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "Bad choice, try again\n"
-msgstr "ۧ۟ŰȘÙŠŰ§Ű± ŰłÙŠŰŠ, Ű­Ű§ÙˆÙ„ Ù…Ű±Ű© ŰŁŰźŰ±Ù‰\n"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "this field describes the device"
+msgstr "Ù‡Ű°Ű§ Ű§Ù„Ű­Ù‚Ù„ ÙŠŰ”Ù Ű§Ù„ŰŹÙ‡Ű§ŰČ"
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Re-submit"
-msgstr "Ű„Űčۧۯ۩ ŰȘŰłÙ„ÙŠÙ…"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ű¶Ű§ÙŰ© Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„Ù‰ Star Office/OpenOffice.org/GIMP"
-#: ../../interactive/stdio.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Notice, a label changed:\n"
-"%s"
+msgid "Local Printers"
+msgstr "Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…Ű­Ù„ÙŠŰ©"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
+msgid "Installation image directory"
+msgstr "ŰŻÙ„ÙŠÙ„ Ű”ÙˆŰ±Ű© Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ"
-#: ../../interactive/stdio.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> There are many things to choose from (%s).\n"
+msgid "NIS Server"
+msgstr "ŰźŰ§ŰŻÙ… NIS"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Your choice? (default `%s'%s) "
+msgid "Port: %s"
+msgstr "Ű§Ù„Ù…Ù†ÙŰ°: %s"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid " enter `void' for void entry"
-msgstr " enter `void' for void entry"
+msgid "Spain"
+msgstr "ŰŁŰłŰšŰ§Ù†ÙŠŰ§"
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Do you want to click on this button?"
-msgstr "Do you want to click on this button?"
+msgid "This user name has already been added"
+msgstr "Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… Ù…ÙŰ¶Ű§Ù Ù…ŰłŰšÙ‚Ű§"
-#: ../../interactive/stdio.pm:1
+#: ../../interactive.pm:1
#, c-format
-msgid "Button `%s': %s"
-msgstr "Button `%s': %s"
+msgid "Choose a file"
+msgstr "Ű„ŰźŰȘ۱ ملف"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Your choice? (0/1, default `%s') "
+msgid "Apply"
+msgstr "ŰȘŰ·ŰšÙŠÙ‚"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Entries you'll have to fill:\n"
-"%s"
+msgid "Auto-detect available ports"
+msgstr "ŰȘŰ­Ù‚Ù‚ ŰąÙ„ÙŠŰ§Ù‹ من Ű§Ù„Ù…Ù†Ű§ÙŰ° Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű©"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"ÙŰŽÙ„ ŰȘŰ­Ù…ÙŠÙ„ Ű§Ù„ÙˆŰ­ŰŻŰ© %s.\n"
-"هل ŰȘŰ±ÙŠŰŻ Ű§Ù„Ù…Ű­Ű§ÙˆÙ„Ű© Ű«Ű§Ù†ÙŠŰ© ŰšÙ…ŰčŰ§Ù…Ù„Ű§ŰȘ ŰŁŰźŰ±Ù‰ŰŸ"
+msgid "Internet Connection Sharing currently disabled"
+msgstr "Ù…ŰŽŰ§Ű±ÙƒŰ© Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Specify options"
-msgstr "Ű­ŰŻŰŻ Ű§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ"
+msgid "San Marino"
+msgstr "ŰłŰ§Ù† Ù…Ű§Ű±ÙŠÙ†Ùˆ"
-#: ../../modules/interactive.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Autoprobe"
-msgstr "ŰȘŰ­Ù‚Ù‚ ŰąÙ„ÙŠ"
+msgid "Belgium"
+msgstr "ŰšÙ„ŰŹÙŠÙƒŰ§"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"في ŰšŰč۶ Ű§Ù„ŰŁŰ­ÙŠŰ§Ù† ÙŠŰ­ŰȘۧۏ Ù…ŰŽŰșل %s مŰčÙ„ÙˆÙ…Ű§ŰȘ Ű§Ű¶Ű§ÙÙŠŰ© لكي يŰčمل\n"
-"ŰšŰŽÙƒÙ„ Ű”Ű­ÙŠŰ­, Ű§Ù„Ű§ ŰŁÙ†Ù‡ يمكنه Ű§Ù„Űčمل ŰŹÙŠŰŻŰ§ ŰšŰŻÙˆÙ†Ù‡Ű§. هل ŰȘŰ±ÙŠŰŻ ŰȘŰ­ŰŻÙŠŰŻ\n"
-"ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ű¶Ű§ÙÙŠŰ© له ŰŁÙˆ ŰȘŰłÙ…Ű­ Ù„Ù„Ù…ŰŽŰșل ŰšŰ§Ù„ŰȘŰ­Ù‚Ù‚ في ŰŹÙ‡Ű§ŰČك\n"
-"Űčن Ű§Ù„Ù…ŰčÙ„ÙˆÙ…Ű§ŰȘ Ű§Ù„ŰȘي ŰłÙŠŰ­ŰȘŰ§ŰŹÙ‡Ű§ŰŸ في ŰšŰč۶ Ű§Ù„ŰŁŰ­ÙŠŰ§Ù†, Ù‚ŰŻ يŰȘ۳ۚۚ Ű§Ù„ŰȘŰ­Ù‚Ù‚ في ŰȘŰčليق Ű§Ù„ŰŹÙ‡Ű§ŰČ, "
-"لكن\n"
-"Ù„Ű§ ÙŠŰŹŰš ŰŁÙ† يŰȘ۳ۚۚ Ű°Ù„Ùƒ في ŰŁÙŠ Ù…ŰŽŰ§ÙƒÙ„."
+msgid "Kuwait"
+msgstr "Ű§Ù„ÙƒÙˆÙŠŰȘ"
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which %s driver should I try?"
-msgstr "ŰŁÙŠ Ù…ŰŽŰșل %s ÙŠŰŹŰš ŰŁÙ† ۧ۳ŰȘŰźŰŻÙ…Ù‡ŰŸ"
+msgid "Choose the window manager to run:"
+msgstr "ۧ۟ŰȘ۱ Ù…ŰŻÙŠŰ± Ű§Ù„Ù†ÙˆŰ§ÙŰ° Ű§Ù„Ű°ÙŠ ŰłÙŠŰȘم ŰȘŰŽŰșيله:"
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Module options:"
-msgstr "ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„ÙˆŰ­ŰŻŰ©:"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "sub generation of the cpu"
+msgstr "Ű§Ù„ŰŹÙŠÙ„ Ű§Ù„Ű«Ű§Ù†ÙˆÙŠ للمŰčŰ§Ù„ŰŹ"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"يمكنك Ű§Ù„ŰąÙ† ۧŰč۷ۧۥ Ű§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ Ù„Ù„ÙˆŰ­ŰŻŰ© %s.\n"
-"Ű§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ في Ù‡ÙŠŰŠŰ© ``name=value name2=value2 ...'' \n"
-"Ù…Ű«Ù„Ű§, ``io=0x300 irq=7''"
+msgid "First Time Wizard"
+msgstr "مŰčŰ§Ù„ŰŹ First Time"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
msgstr ""
-"يمكنك Ű§Ù„ŰąÙ† ۧŰč۷ۧۥ Ű§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ Ù„Ù„ÙˆŰ­ŰŻŰ© %s.\n"
-"Ù„Ű§Ű­Űž ŰŁÙ† ŰŁÙŠ ŰčÙ†ÙˆŰ§Ù† ÙŠŰŹŰš Ű§ŰŻŰźŰ§Ù„Ù‡ Ù…ŰłŰšÙˆÙ‚Ű§Ù‹ ŰšÙ€ 0x Ù…Ű«Ù„ '0x123'"
-
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "(module %s)"
-msgstr "(Ű§Ù„ÙˆŰ­ŰŻŰ© %s)"
+"ŰžÙ‡Ű± ۟۷ۣ و Ù„Ű§ ŰŁŰčŰ±Ù كيف ŰŁŰȘŰčŰ§Ù…Ù„ مŰčه ŰšŰŁŰłÙ„ÙˆŰš ŰŹÙŠŰŻ.\n"
+"ŰȘۧۚŰč Űčلى Ù…ŰłŰ€ÙˆÙ„ÙŠŰȘك."
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰ«ŰšÙŠŰȘ Ù…ŰŽŰșل %s Ù„Ù„ŰšŰ·Ű§Ù‚Ű© %s"
+msgid "please wait, parsing file: %s"
+msgstr "ÙŠŰ±ŰŹÙ‰ Ű§Ù„Ű„Ù†ŰȘ۞ۧ۱, ŰŹŰ§Ű±ÙŠ ŰȘŰ­Ù„ÙŠÙ„ Ű§Ù„Ù…Ù„Ù: %s"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "See hardware info"
-msgstr "Űč۱۶ مŰčÙ„ÙˆÙ…Ű§ŰȘ Ű§Ù„ŰčŰȘۧۯ"
+msgid "Taiwan"
+msgstr "ŰȘŰ§ÙŠÙˆŰ§Ù†"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "هل Ù„ŰŻÙŠÙƒ ŰŁÙŠ ÙˆŰ§ŰŹÙ‡Ű§ŰȘ %s۟"
+msgid "Pakistan"
+msgstr "ŰšŰ§ÙƒŰłŰȘŰ§Ù†"
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do you have another one?"
-msgstr "هل ŰčÙ†ŰŻÙƒ ÙˆŰ§Ű­ŰŻŰ© ŰŁŰźŰ±Ù‰ŰŸ"
+msgid ""
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
+msgstr ""
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Found %s %s interfaces"
-msgstr "ŰȘم Ű§ÙŠŰŹŰ§ŰŻ %s %s ÙˆŰ§ŰŹÙ‡Ű§ŰȘ"
+msgid "Permissions"
+msgstr "Ű§Ù„ŰȘŰ”Ű§Ű±ÙŠŰ­"
-#: ../../modules/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "يمكنك ŰȘÙ‡ÙŠŰŠŰ© كل مŰčŰ§Ù…Ù„ Ù„Ù„ÙˆŰ­ŰŻŰ© Ù‡Ù†Ű§."
+msgid "Provider name (ex provider.net)"
+msgstr "Ű§ŰłÙ… Ű§Ù„Ù…ÙˆÙŰ± (Ù…Ű«Ù„Ű§Ù‹ provider.net)"
-#: ../../modules/parameters.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "comma separated strings"
-msgstr "Ű­Ű±ÙÙŠŰ§ŰȘ Ù…ÙŰ”ÙˆÙ„Ű© ŰšŰ§Ù„ÙŰ§Ű”Ù„Ű©"
+msgid "Version: %s\n"
+msgstr "Ű§Ù„Ű„Ű”ŰŻŰ§Ű±: %s\n"
-#: ../../modules/parameters.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "comma separated numbers"
-msgstr "ŰŁŰ±Ù‚Ű§Ù… Ù…ÙŰ”ÙˆÙ„Ű© ŰšŰ§Ù„ÙŰ§Ű”Ù„Ű©"
+msgid ""
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
+msgstr ""
+"Ű§Ù„Ù†ŰžŰ§Ù… Ù„ŰŻÙŠÙƒ قليل Ű§Ù„Ù…ÙˆŰ§Ű±ŰŻ. Ù‚ŰŻ ŰȘÙ‚Ű§ŰšÙ„ ŰšŰč۶ Ű§Ù„Ù…ŰŽŰ§ÙƒÙ„ قي ŰȘŰ«ŰšÙŠŰȘ\n"
+"Mandrake Linux. ۧ۰ۧ Ű­ŰŻŰ« Ű°Ù„Ùƒ, يمكنك Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ في ÙˆŰ¶Űč Ù†Ű”ÙŠ, Ù„Ù‡Ű°Ű§ Ű§Ù„Űș۱۶,\n"
+"ۧ۶ŰșŰ· `F1' ŰčÙ†ŰŻ Ű§Ù„Ű„Ù‚Ù„Ű§Űč من Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹ, و Ű§ÙƒŰȘŰš `text'."
-#: ../../modules/parameters.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "%d comma separated strings"
-msgstr "%d Ű­Ű±ÙÙŠŰ§ŰȘ Ù…ÙŰ”ÙˆÙ„Ű© ŰšŰ§Ù„ÙŰ§Ű”Ù„Ű©"
+msgid "Use the Windows partition for loopback"
+msgstr "ۧ۳ŰȘŰźŰŻÙ… ŰȘŰŹŰČŰŠŰ© Windows كـ loopback"
-#: ../../modules/parameters.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d ŰŁŰ±Ù‚Ű§Ù… Ù…ÙŰ”ÙˆÙ„Ű© ŰšŰ§Ù„ÙŰ§Ű”Ù„Ű©"
+msgid "Armenian (typewriter)"
+msgstr "Ű§Ù„ŰŁŰ±Ù…ÙŠÙ†ÙŠŰ© (ŰąÙ„Ű© ÙƒŰ§ŰȘۚ۩)"
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "a number"
-msgstr "Ű±Ù‚Ù…"
+msgid "Connection type: "
+msgstr "نوŰč Ű§Ù„ŰčÙ„Ű§Ù‚Ű©"
-#: ../../network/adsl.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
-msgstr ""
-"ŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ alcatel microcode.\n"
-"قم ŰšŰȘنŰČÙŠÙ„Ù‡Ű§ Űčلى\n"
-"http://www.speedtouchdsl.com/dvreg_lx.htm\n"
-"و Ű§Ù†ŰłŰź Ű§Ù„Ù…Ù„Ù mgmt.o Ű§Ù„Ù‰ /usr/share/speedtouch"
+msgid "Graphical interface"
+msgstr "Ű§Ù„ÙˆŰ§ŰŹÙ‡Ű© Ű§Ù„Ű±ŰłÙˆÙ…ÙŠŰ©"
-#: ../../network/adsl.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Ű§Ù„Ű·Ű±ÙŠÙ‚Ű© Ű§Ù„ŰŁÙƒŰ«Ű± ŰŽÙŠÙˆŰčŰ§Ù‹ Ù„Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšÙ€ adsl هي pppoe.\n"
-"ŰšŰč۶ Ű§Ù„Ű„ŰȘŰ”Ű§Ù„Ű§ŰȘ ŰȘŰłŰȘŰźŰŻÙ… pptp, و Ű§Ù„Ù‚Ù„ÙŠÙ„ ŰȘŰłŰȘŰźŰŻÙ… dhcp.\n"
-"ۧ۰ۧ لم ŰȘكن ŰȘŰčلم, ۧ۟ŰȘ۱ 'ۧ۳ŰȘŰźŰŻÙ… pppoe'"
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s مŰč ŰȘŰłŰ±ÙŠŰč Ű«Ù„Ű§Ű«ÙŠ Ű§Ù„ŰŁŰšŰčۧۯ"
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connect to the Internet"
-msgstr "ÙˆŰ”Ù‘Ù„ Ű„Ù„Ù‰ Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ "
+msgid "India"
+msgstr "Ű§Ù„Ù‡Ù†ŰŻ"
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Sagem (using pppoa) usb"
-msgstr "Sagem (using pppoa) usb"
+msgid "Chad"
+msgstr "ŰȘێۧۯ"
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
+msgid "Slovakia"
+msgstr "ŰłÙ„ÙˆÙŰ§ÙƒÙŠŰ§"
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "use dhcp"
-msgstr "ۧ۳ŰȘŰźŰŻÙ… dhcp"
+msgid "Singapore"
+msgstr "ŰłÙ†ŰșŰ§ÙÙˆŰ±Ű©"
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "use pptp"
-msgstr "ۧ۳ŰȘŰźŰŻÙ… pptp"
+msgid "Cambodia"
+msgstr "ÙƒÙ…ŰšÙˆŰŻÙŠŰ§"
-#: ../../network/adsl.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "use pppoe"
-msgstr "ۧ۳ŰȘŰźŰŻÙ… pppoe"
+msgid "Monitor HorizSync: %s\n"
+msgstr "ŰȘŰČŰ§Ù…Ù† Ű§Ù„ŰŽŰ§ŰŽŰ© Ű§Ù„ŰŁÙÙ‚ÙŠ: %s\n"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Other ports"
-msgstr "Ù…Ù†Ű§ÙŰ° ŰŁŰźŰ±Ù‰"
+msgid "Path"
+msgstr "Ű§Ù„Ù…ŰłŰ§Ű±"
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Everything (no firewall)"
-msgstr "كل ŰŽŰŠ (Ù„Ű§ ۏۯۧ۱ Ù†Ű§Ű±ÙŠ)"
+msgid ""
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
+msgstr ""
+"Ù‡Ù†Ű§ يمكنك ŰȘŰ­ŰŻÙŠŰŻ ŰŁÙŠ ŰŁÙ…Ű± Ù‡Ù„Ű§Ù…ÙŠ يمكن ŰȘŰ­ÙˆÙŠÙ„ ÙˆŰžÙŠÙŰ© Ű§Ù„Ű·ŰšŰ§ŰčŰ© Ű§Ù„ÙŠÙ‡ ŰšŰŻÙ„Ű§Ù‹ من Ű§Ű±ŰłŰ§Ù„Ù‡Ű§ "
+"Ù…ŰšŰ§ŰŽŰ±Ű©Ù‹ Ű§Ù„Ù‰ Ű§Ù„Ű·Ű§ŰšŰčŰ©."
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
msgstr ""
-"ŰȘم ۧŰč۷ۧۥ Ù…Ù†ÙŰ° ŰșÙŠŰ± Ű”Ű§Ù„Ű­: %s.\n"
-"Ű§Ù„Ù†ŰłÙ‚ Ű§Ù„Ű”Ű­ÙŠŰ­ هو \"port/tcp\" ŰŁÙˆ \"port/udp\", \n"
-"في Ű­ÙŠÙ† يكون Ű§Ù„Ù…Ù†ÙŰ° (port) ŰšÙŠÙ† 1 و 65535."
+"Ù†ŰžŰ§Ù… Ű§Ù„Ű·ŰšŰ§ŰčŰ© (%s) لن يŰȘم ŰšŰŻŰ€Ù‡ ŰšŰŽÙƒÙ„ ŰąÙ„ÙŠ ŰčÙ†ŰŻ ۚۯۥ ŰȘŰŽŰșيل Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű©.\n"
+"\n"
+"من Ű§Ù„Ù…Ù…ÙƒÙ† ŰŁÙ† يكون Ù‚ŰŻ ŰȘم ŰȘŰčŰ·ÙŠÙ„ Ű§Ù„ŰšŰŻŰĄ Ű§Ù„ŰąÙ„ÙŠ ۚ۳ۚۚ Ű§Ù„ŰȘŰșÙŠÙŠŰ± Ű§Ù„Ù‰ Ù…ŰłŰȘوى ŰŁŰčلى Ù„ŰŁÙ† "
+"Ù†ŰžŰ§Ù… Ű§Ù„Ű·ŰšŰ§ŰčŰ© Ù‚ŰŻ يكون Ù†Ù‚Ű·Ű© Ù…ŰšŰŻŰŠÙŠŰ© Ù„Ù‡ŰŹÙ…Ű§ŰȘ Ű§Ù„Ù…ŰźŰȘŰ±Ù‚ÙŠÙ†.\n"
+"\n"
+"هل ŰȘŰ±ÙŠŰŻ ŰȘمكين Ű§Ù„ŰšŰŻŰĄ Ű§Ù„ŰąÙ„ÙŠ Ù„Ù†ŰžŰ§Ù… Ű§Ù„Ű·ŰšŰ§ŰčŰ© ŰčÙ†ŰŻ ۚۯۥ Ű§Ù„ŰȘŰŽŰșيل Ù…Ű±Ű© ŰŁŰźŰ±Ù‰ŰŸ"
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
+"Printer %s\n"
+"What do you want to modify on this printer?"
msgstr ""
-"يمكنك Ű§ŰŻŰźŰ§Ù„ Ù…Ù†Ű§ÙŰ° مŰȘنوŰčŰ©. \n"
-"ŰŁÙ…Ű«Ù„Ű© Ű”Ű§Ù„Ű­Ű© هي: 139/tcp 139/udp.\n"
-"Ű§Ù„Ù‚ Ù†ŰžŰ±Ű© Űčلى /etc/services لمŰČÙŠŰŻ من Ű§Ù„Ù…ŰčÙ„ÙˆÙ…Ű§ŰȘ."
+"Ű§Ù„Ű·Ű§ŰšŰčŰ© %s\n"
+"هل ŰȘŰ±ÙŠŰŻ ŰȘŰčŰŻÙŠÙ„ ŰȘلك Ű§Ù„Ű·Ű§ŰšŰčŰ©ŰŸ"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr "ŰŁÙŠ ŰźŰŻÙ…Ű© ŰȘŰ±ÙŠŰŻ Ű§Ù„ŰłÙ…Ű§Ű­ Ù„Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ ŰŁÙ† ŰȘŰȘŰ”Ù„ ŰšÙ‡Ű§ŰŸ"
+msgid "Add host"
+msgstr "Ű§Ű¶Ù Ù…ŰłŰȘŰ¶ÙŠÙ"
-#: ../../network/drakfirewall.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"drakfirewall configurator\n"
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
+"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
-"ۣۯۧ۩ ŰȘÙ‡ÙŠŰŠŰ© DrakFirewall\n"
+"ۧ۰ۧ كنŰȘ ŰȘŰčŰȘÙ‚ŰŻ فŰčÙ„Ű§Ù‹ ŰŁÙ†Ùƒ ŰȘŰčŰ±Ù Ù…Ű§ هو Ű§Ù„Ù…ŰŽŰșل Ű§Ù„Ű”Ű­ÙŠŰ­ Ù„ŰšŰ·Ű§Ù‚ŰȘك\n"
+"يمكنك ۧ۟ŰȘÙŠŰ§Ű±Ù‡ من Ű§Ù„Ù‚Ű§ŰŠÙ…Ű© ŰŁŰčÙ„Ű§Ù‡.\n"
"\n"
-"ŰȘŰŁÙƒŰŻ من ŰŁÙ†Ùƒ قمŰȘ ŰšŰȘÙ‡ÙŠŰŠŰ© ۧŰȘŰ”Ű§Ù„Ùƒ ŰšŰ§Ù„ŰŽŰšÙƒŰ©/Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ ۚۧ۳ŰȘŰźŰŻŰ§Ù…\n"
-"drakconnect Ù‚ŰšÙ„ Ű§Ù„Ù…ŰȘۧۚŰčŰ©."
+"Ű§Ù„Ù…ŰŽŰșل Ű§Ù„Ű­Ű§Ù„ÙŠ Ù„ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű”ÙˆŰȘ \"%s\" Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙƒ هو \"%s\" "
-#: ../../network/drakfirewall.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"drakfirewall configurator\n"
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
+"\"Custom\" permit a per-user granularity.\n"
msgstr ""
-"ۣۯۧ۩ ŰȘÙ‡ÙŠŰŠŰ© drakfirewall\n"
+"هل ŰȘŰ±ÙŠŰŻ Ű§Ù„ŰłÙ…Ű§Ű­ Ù„Ù„Ù…ŰłŰȘŰźŰŻÙ…ÙŠÙ† ŰšÙ…ŰŽŰ§Ű±ÙƒŰ© ŰšŰč۶ Ű§Ù„ŰŁŰŻÙ„Ű© Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙ‡Ù…ŰŸ\n"
+"Ű§Ù„ŰłÙ…Ű§Ű­ ŰšŰ°Ù„Ùƒ ŰłÙŠŰłÙ…Ű­ Ù„Ù„Ù…ŰłŰȘŰźŰŻÙ…ÙŠÙ† ŰšŰŁÙ† ÙŠÙ†Ù‚Ű±ÙˆŰ§ ŰČ۱ Ű§Ù„Ù…ŰŽŰ§Ű±ÙƒŰ© في ÙƒÙˆÙ†ÙƒÙŠÙˆŰ±Ű± و نوŰȘÙŠÙ„ÙˆŰł.\n"
"\n"
-"Ù‡Ű°Ù‡ Ű§Ù„ŰŁŰŻŰ§Ű© ŰȘŰłÙ…Ű­ لك ŰšŰȘÙ‡ÙŠŰŠŰ© ۏۯۧ۱ Ù†Ű§Ű±ÙŠ ŰŽŰźŰ”ÙŠ Ù„Ù†ŰžŰ§Ù… Mandrake Linux Ù‡Ű°Ű§.\n"
-"ۄ۰ۧ كنŰȘ ŰȘŰ±ÙŠŰŻ ۏۯۧ۱ۧ Ù†Ű§Ű±ÙŠŰ§ مŰȘ۟۔۔ۧ, Ű§Ù„Ù‚ Ù†ŰžŰ±Ű© Űčلى\n"
-"ŰȘوŰČيŰčŰ© MandrakeSecurity Firewall."
-
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "No network card"
-msgstr "Ù„Ű§ ŰȘÙˆŰŹŰŻ ŰšŰ·Ű§Ù‚Ű© ŰŽŰšÙƒŰ©"
-
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "POP and IMAP Server"
-msgstr "ŰźŰ§ŰŻÙ… POP و IMAP"
-
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "Mail Server"
-msgstr "ŰźŰ§ŰŻÙ… ŰšŰ±ÙŠŰŻ"
+"\"Ù…ŰźŰ”Ű”\" ÙŠŰłÙ…Ű­ لك ŰšŰčمل ۧŰčۯۧۯۧŰȘ ۟ۧ۔ لكل Ù…ŰłŰȘŰźŰŻÙ….\n"
-#: ../../network/drakfirewall.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Domain Name Server"
-msgstr "ŰźŰ§ŰŻÙ… Ű§ŰłÙ… Ű§Ù„Ù†Ű·Ű§Ù‚"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
+msgstr ""
+"ÙŰ¶Ù„Ű§Ù ۧ۟ŰȘ۱ Ű­ÙŰž ŰŁÙˆ ŰȘŰ­Ù…ÙŠÙ„ ۧ۟ŰȘÙŠŰ§Ű±Ű§ŰȘك Ù„Ù„Ű­ŰČم من Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…Ű±Ù†.\n"
+"Ű§Ù„Ù†ŰłÙ‚ Ù…ŰŽŰ§ŰšÙ‡ Ù„ŰŁÙ‚Ű±Ű§Ű” Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„ŰąÙ„ÙŠ Ű§Ù„Ù…Ű±Ù†Ű©."
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Web Server"
-msgstr "ŰźŰ§ŰŻÙ… Ű§Ù„ÙˆÙŠŰš"
+msgid "China (broadcast)"
+msgstr "Ű§Ù„Ű”ÙŠÙ† (broadcast)"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr "ÙŠŰŹŰš ŰŁÙ† ÙŠŰ­ŰȘوي Ű§ŰłÙ… Ù…ŰłŰȘŰ¶ÙŠÙ Zeroconf Űčلى ."
+msgid "Use quota for backup files."
+msgstr "ۧ۳ŰȘŰźŰŻÙ… quota Ù„Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ."
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Host name"
-msgstr "Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ"
+msgid "Configuring printer \"%s\"..."
+msgstr "ŰŹŰ§Ű±ÙŠ Ű„Űčۯۧۯ Ű§Ù„Ű·Ű§ŰšŰčŰ© \"%s\" ..."
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Zeroconf Host name"
-msgstr "Ű§ŰłÙ… Ù…ŰłŰȘŰ¶ÙŠÙ Zeroconf"
+msgid "Internet connection"
+msgstr "ÙˆŰ”Ù„Ű© Ű§Ù†ŰȘŰ±Ù†ŰȘ"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
msgstr ""
-"\n"
-"\n"
-"ŰŁŰŻŰźÙ„ Ű§ŰłÙ… Ù…ŰłŰȘŰ¶ÙŠÙ Zeroconf ŰšŰŻÙˆÙ† ŰŁÙŠ Ù†Ù‚Ű§Ű· ۧ۰ۧ لم ŰȘكن ŰȘŰ±ÙŠŰŻ\n"
-"ۧ۳ŰȘŰźŰŻŰ§Ù… Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠ."
-
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
-msgid "Configuring network"
-msgstr "ŰŹŰ§Ű±ÙŠ ۧŰčۯۧۯ Ű§Ù„ŰŽŰšÙƒŰ©"
-
-#: ../../network/ethernet.pm:1
-#, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
-msgstr "ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ Ù…ÙˆŰ§ŰŠÙ… Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ Ű§Ù„Ű°ÙŠ ŰȘŰ±ÙŠŰŻ ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡ Ù„Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ."
+"ÙŰŽÙ„ ŰȘŰ­Ù…ÙŠÙ„ Ű§Ù„ÙˆŰ­ŰŻŰ© %s.\n"
+"هل ŰȘŰ±ÙŠŰŻ Ű§Ù„Ù…Ű­Ű§ÙˆÙ„Ű© Ű«Ű§Ù†ÙŠŰ© ŰšÙ…ŰčŰ§Ù…Ù„Ű§ŰȘ ŰŁŰźŰ±Ù‰ŰŸ"
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Choose the network interface"
-msgstr "ۧ۟ŰȘ۱ ÙˆŰ§ŰŹÙ‡Ű© Ű§Ù„ŰŽŰšÙƒŰ©"
+msgid "Welcome to the Open Source world."
+msgstr "ŰŁÙ‡Ù„Ű§Ù‹ ŰšÙƒ في ŰčŰ§Ù„Ù… Ű§Ù„Ù…Ű”Ű§ŰŻŰ± Ű§Ù„Ù…ÙŰȘÙˆŰ­Ű©"
-#: ../../network/ethernet.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"لم يŰȘم Ű§ÙƒŰȘŰŽŰ§Ù ŰŁÙŠ Ù…ÙˆŰ§ŰŠÙ… ŰŽŰšÙƒŰ© Ű§ÙŠŰ«Ű±Ù†ŰȘ Űčلى Ù†ŰžŰ§Ù…Ùƒ.\n"
-"Ù„Ű§ يمكنني ۧŰčۯۧۯ نوŰč Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ Ù‡Ű°Ű§."
+msgid "Bosnia and Herzegovina"
+msgstr "Ű§Ù„ŰšÙˆŰłÙ†Ű© و Ű§Ù„Ù‡Ű±ŰłÙƒ"
-#: ../../network/ethernet.pm:1
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
msgstr ""
-"ŰŁÙŠ Űčميل DHCP ŰȘŰ±ÙŠŰŻ ŰŁÙ† ŰȘŰłŰȘŰźŰŻÙ…ŰŸ\n"
-"Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠ هو dhcp-client."
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "لم يŰȘم Ű§ÙŠŰŹŰ§ŰŻ ŰšŰ·Ű§Ù‚Ű§ŰȘ ISDN PCI. ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ ÙˆŰ§Ű­ŰŻŰ© في Ű§Ù„ŰŽŰ§ŰŽŰ© Ű§Ù„ŰȘŰ§Ù„ÙŠŰ©."
+"ŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ Ù†ŰžŰ§Ù… Ù…Ù„ÙŰ§ŰȘ Ű­Ù‚ÙŠÙ‚ÙŠ (ext2/ext3, resierfs, xfs, ŰŁÙˆ jfs) Ù„Ù†Ù‚Ű·Ű© Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„ "
+"Ù‡Ű°Ù‡\n"
-#: ../../network/isdn.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
-msgstr ""
-"ŰȘم Ű§ÙƒŰȘŰŽŰ§Ù ŰšŰ·Ű§Ù‚Ű© ISDN PCI, لكن لم يŰȘم Ű§Ù„ŰȘŰčŰ±Ù Űčلى نوŰčÙ‡Ű§. ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ ŰšŰ·Ű§Ù‚Ű© PCI "
-"في Ű§Ù„ŰŽŰ§ŰŽŰ© Ű§Ù„ŰȘŰ§Ù„ÙŠŰ©."
+msgid "You must enter a host name or an IP address.\n"
+msgstr "ÙŰ¶Ù„Ű§ ŰŁŰŻŰźÙ„ Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ ŰŁÙˆ ŰčÙ†ÙˆŰ§Ù† IP.\n"
-#: ../../network/isdn.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "ŰŁÙŠ من Ű§Ù„ŰąŰȘي هي ŰšŰ·Ű§Ù‚Ű© ISDN Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙƒŰŸ"
+msgid "Netherlands"
+msgstr "Ù‡ÙˆÙ„Ù†ŰŻŰ§"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "ISDN Configuration"
-msgstr "ŰȘÙ‡ÙŠŰŠŰ© ISDN"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ű±ŰłŰ§Ù„ Ű§Ù„Ù…Ù„ÙŰ§ŰȘ..."
#: ../../network/isdn.pm:1
#, c-format
-msgid "Abort"
-msgstr "Ű„Ù†Ù‡Ű§ŰĄ"
+msgid "Internal ISDN card"
+msgstr "ŰšŰ·Ű§Ù‚Ű© ISDN ŰŻŰ§ŰźÙ„ÙŠŰ©"
-#: ../../network/isdn.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Continue"
-msgstr "ŰȘۧۚŰč"
+msgid ""
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
+msgstr "Ù„Ű§ ÙŠÙˆŰŹŰŻ Ù…ŰŽŰșل ŰšŰŻÙŠÙ„ (ALSA ŰŁÙˆ OSS) Ù„ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű”ÙˆŰȘ (%s) Ű§Ù„ŰȘي ŰȘŰłŰȘŰźŰŻÙ… \"%s\""
-#: ../../network/isdn.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
-"\n"
-"ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ù„ŰŻÙŠÙƒ ŰšŰ·Ű§Ù‚Ű© ISA, ÙŰ„Ù† Ű§Ù„Ù‚ÙŠÙ… Ű§Ù„ŰȘي ŰłŰȘŰč۱۶ Űčلى Ű§Ù„ŰŽŰ§ŰŽŰ© Ű§Ù„ŰȘŰ§Ù„ÙŠŰ© ÙŠŰŹŰš ŰŁÙ† ŰȘكون "
-"Ű”Ű­ÙŠŰ­Ű©.\n"
-"\n"
-"ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ù„ŰŻÙŠÙƒ ŰšŰ·Ű§Ù‚Ű© PCMCIA, ÙŠŰŹŰš Űčليك ŰŁÙ† ŰȘŰčŰ±Ù قيم \"irq\" و \"io\" Ű§Ù„ŰźŰ§Ű”Ű© "
-"ŰšŰšŰ·Ű§Ù‚ŰȘك.\n"
+msgid "Title"
+msgstr "Ű§Ù„ŰčÙ†ÙˆŰ§Ù†"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "I don't know"
-msgstr "Ù„Ű§ ŰŁŰčŰ±Ù "
+msgid "Install & convert Fonts"
+msgstr "Ű«ŰšÙ‘ŰȘ و Ű­ÙˆÙ‘Ù„ Ű§Ù„ŰźŰ·ÙˆŰ·"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "PCI"
-msgstr "PCI"
+msgid "WARNING"
+msgstr "WARNING"
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "Installing bootloader"
+msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰ«ŰšÙŠÙ† Ù…Ű­Ù…Ù‘Ù„ Ű§Ù„Ű„Ù‚Ù„Ű§Űč"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "What kind of card do you have?"
-msgstr "Ù…Ű§ هو نوŰč Ű§Ù„ŰšŰ·Ű§Ù‚Ű© Ù„ŰŻÙŠÙƒŰŸ"
+msgid "replay"
+msgstr "ۧŰčۧۯ۩"
-#: ../../network/isdn.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr "ŰȘم Ű§ÙŠŰŹŰ§ŰŻ Ű§Ù„ÙˆŰ§ŰŹÙ‡Ű© \"%s\" هل ŰȘŰ±ÙŠŰŻ ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡Ű§ŰŸ"
+msgid "detected %s"
+msgstr "ŰȘم Ű§ÙƒŰȘŰłŰ§Ù %s"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Ù…Ű§ هو Ű§Ù„ŰšŰ±ÙˆŰȘوكول Ű§Ù„Ű°ÙŠ ŰȘŰ±ÙŠŰŻ ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡ŰŸ"
+msgid "Virgin Islands (U.S.)"
+msgstr "Ű§Ù„ŰŹŰČ۱ Ű§Ù„Űč۰۱ۧۥ (Ű§Ù„ÙˆÙ„Ű§ÙŠŰ§ŰȘ Ű§Ù„Ù…ŰȘŰ­ŰŻŰ©)"
-#: ../../network/isdn.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "ŰšŰ±ÙˆŰȘوكول Ù„ŰšÙ‚ÙŠŰ© Ű§Ù„ŰčŰ§Ù„Ù…"
+msgid "Bad backup file"
+msgstr "ملف Ù†ŰłŰź ۭۧŰȘÙŠŰ§Ű·ÙŠ ŰłÙŠŰŠ"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"ŰšŰ±ÙˆŰȘوكول Ù„ŰšÙ‚ÙŠŰ© Ű§Ù„ŰčŰ§Ù„Ù…\n"
-"Ù„Ű§ D-Channel (ŰźŰ·ÙˆŰ· Ù…Ű€ŰŹŰ±Ű©)"
+"ŰȘم ŰȘÙ†Ű”ÙŠŰš Ù…ŰŽŰ§Ű±ÙƒŰ© Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ Ù…ŰłŰšÙ‚Ű§Ù‹.\n"
+"و هي مŰčŰ·Ù„Ű© Ű­Ű§Ù„ÙŠŰ§Ù‹.\n"
+"\n"
+"Ù…Ű§Ű°Ű§ ŰȘŰ±ÙŠŰŻ ŰŁÙ† ŰȘفŰčÙ„ŰŸ"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "European protocol"
-msgstr "Ű§Ù„ŰšŰ±ÙˆŰȘوكول Ű§Ù„ŰŁÙˆŰ±ÙˆŰšÙŠ"
+msgid "Enter IP address and port of the host whose printers you want to use."
+msgstr "ŰŁŰŻŰźÙ„ ŰčÙ†ÙˆŰ§Ù† IP و Ù…Ù†ÙŰ° Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ Ű§Ù„Ű°ÙŠ ŰȘŰ±ÙŠŰŻ ۧ۳ŰȘŰźŰŻŰ§Ù… ۷ۧۚŰčۧŰȘه."
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Ű§Ù„ŰšŰ±ÙˆŰȘوكول Ű§Ù„ŰŁÙˆŰ±ÙˆŰšÙŠ (EDSS1)"
+msgid "Pipe into command"
+msgstr "Ű­ÙˆÙ„ Ű§Ù„Ù‰ Ű§Ù„ŰŁÙ…Ű±"
-#: ../../network/isdn.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
msgstr ""
-"ۧ۟ŰȘ۱ Ù…ÙˆÙŰ± Ű§Ù„ŰźŰŻÙ…Ű© Ű§Ù„ŰźŰ§Ű” ŰšÙƒ.\n"
-"Ű§Ù† لم يكن Ù…ÙˆŰŹÙˆŰŻŰ§Ù‹ في Ű§Ù„Ù‚Ű§ŰŠÙ…Ű©, ۧ۟ŰȘ۱ ŰșÙŠŰ± Ù…ÙˆŰŹÙˆŰŻ."
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "External ISDN modem"
-msgstr "Ù…ÙˆŰŻÙ… ISDN ŰźŰ§Ű±ŰŹÙŠ"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Internal ISDN card"
-msgstr "ŰšŰ·Ű§Ù‚Ű© ISDN ŰŻŰ§ŰźÙ„ÙŠŰ©"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "Ù…Ű§ هو نوŰč ÙˆŰ”Ù„Ű© ISDN Ù„ŰŻÙŠÙƒŰŸ"
+"ŰšŰč۶ Ű§Ù„ŰčŰȘۧۯ Ű§Ù„Ù…ÙˆŰŹÙˆŰŻ Űčلى ŰŹÙ‡Ű§ŰČك ÙŠŰ­ŰȘۧۏ Ű§Ù„Ù‰ Ù…ŰŽŰșÙ„Ű§ŰȘ ``ŰȘŰŹŰ§Ű±ÙŠŰ©'' كي ŰȘŰčمل.\n"
+"يمكنك Ű§ÙŠŰŹŰ§ŰŻ مŰČÙŠŰŻ من Ű§Ù„Ù…ŰčÙ„ÙˆÙ…Ű§ŰȘ ŰčÙ†Ù‡Ű§ في: %s"
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Network Configuration Wizard"
-msgstr "مŰčŰ§Ù„ŰŹ Ű„Űčۯۧۯ Ű§Ù„ŰŽŰšÙƒŰ©"
+msgid "Detecting devices..."
+msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰȘŰ­Ù‚Ù‚ من Ű§Ù„ŰŁŰŹÙ‡ŰČŰ©..."
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "Ű„Űčۯۧۯ Ù‚ŰŻÙŠÙ… (isdn4net)"
+msgid "Click here to launch the wizard ->"
+msgstr "Ű§Ù†Ù‚Ű± Ù‡Ù†Ű§ لŰȘŰŽŰșيل Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ ->"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "New configuration (isdn-light)"
-msgstr "Ű„Űčۯۧۯ ŰŹŰŻÙŠŰŻ (isdn-light)"
+msgid "Haiti"
+msgstr "Ù‡Ű§ÙŠŰȘي"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
+"Description of the fields:\n"
"\n"
-"We recommand the light configuration.\n"
msgstr ""
-"Ù…Ű§ هي ŰȘÙ‡ÙŠŰŠŰ© ISDN Ű§Ù„ŰȘي ŰȘÙŰ¶Ù„Ù‡Ű§ŰŸ\n"
-"\n"
-"* Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Ù‚ŰŻÙŠÙ…Ű© ŰȘŰłŰȘŰźŰŻÙ… isdn4net. و هي ŰȘŰ­ŰȘوي Űčلى ŰŁŰŻÙˆŰ§ŰȘ\n"
-" Ù‚ÙˆÙŠŰ© و Ù„ÙƒÙ†Ù‡Ű§ Ű”Űčۚ۩ Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ©, و ŰșÙŠŰ± Ù‚ÙŠŰ§ŰłÙŠŰ©.\n"
-"\n"
-"* Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰŹŰŻÙŠŰŻŰ© ŰŁŰłÙ‡Ù„ في Ű§Ù„ÙÙ‡Ù…, و ŰŁÙƒŰ«Ű±\n"
-" Ù‚ÙŠŰ§ŰłÙŠŰ©, و لكن مŰč ŰŁŰŻÙˆŰ§ŰȘ ŰŁÙ‚Ù„.\n"
+"ÙˆŰ”Ù Ű§Ù„Ű­Ù‚ÙˆÙ„:\n"
"\n"
-"Ù†Ű­Ù† Ù†ÙŰ¶Ù‘Ù„ لك Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰźÙÙŠÙŰ©.\n"
-#: ../../network/modem.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Do nothing"
-msgstr "Ù„Ű§ ŰȘفŰčل ŰŽÙŠŰŠŰ§Ù‹"
+msgid "the name of the CPU"
+msgstr "Ű§ŰłÙ… Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ"
-#: ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Install rpm"
-msgstr "Ű«ŰšŰȘ rpm"
+msgid "Refreshing printer data..."
+msgstr "ŰŹŰ§Ű±ÙŠ ۧŰčۧۯ۩ ŰȘŰ­Ù…ÙŠÙ„ ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„Ű·Ű§ŰšŰ©..."
-#: ../../network/modem.pm:1
+#: ../../install2.pm:1
#, c-format
-msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
-msgstr "ŰȘم Ű§ÙŠŰŹŰ§ŰŻ Ű§Ù„ÙˆÙŠÙ†Ù…ÙˆŰŻÙ… \"%s\", هل ŰȘŰ±ÙŠŰŻ ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„ŰšŰ±Ű§Ù…ŰŹ Ű§Ù„Ù…Ű·Ù„ÙˆŰšŰ© ۟"
+msgid "You must also format %s"
+msgstr "Űčليك ŰŁÙŠŰ¶Ű§ ŰȘŰŹÙ‡ÙŠŰČ %s"
-#: ../../network/modem.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Title"
-msgstr "Ű§Ù„ŰčÙ†ÙˆŰ§Ù†"
+msgid "Be careful: this operation is dangerous."
+msgstr "كن ۭ۰۱ۧ: Ù‡Ű°Ù‡ Ű§Ù„ŰčÙ…Ù„ÙŠŰ© ŰźŰ·ÙŠŰ±Ű©"
-#: ../../network/modem.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
-msgstr ""
-"Ű§Ù„Ù…ÙˆŰŻÙ… Ù„ŰŻÙŠÙƒ ŰșÙŠŰ± Ù…ŰŻŰčوم من Ű§Ù„Ù†ŰžŰ§Ù….\n"
-"Ű§Ù„Ù‚ Ù†ŰžŰ±Ű© Űčلى http://www.linmodems.org"
+msgid "Insert a floppy containing package selection"
+msgstr "ŰŁŰŻŰźÙ‡Ù„ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…Ű±Ù† Ű§Ù„Ù…Ű­ŰȘوى Űčلى ۧ۟ŰȘÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„Ű­ŰČم"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "ŰźŰ§ŰŻÙ… DNS Ű§Ù„Ű«Ű§Ù†ÙŠ (ۧ۟ŰȘÙŠŰ§Ű±ÙŠ)"
+msgid "Server: "
+msgstr "Ű§Ù„ŰźŰ§ŰŻÙ…: "
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "First DNS Server (optional)"
-msgstr "ŰźŰ§ŰŻÙ… DNS Ű§Ù„ŰŁÙˆÙ„ (ۧ۟ŰȘÙŠŰ§Ű±ÙŠ)"
+msgid "Security Alerts:"
+msgstr "ŰȘÙ†ŰšÙŠÙ‡Ű§ŰȘ ŰŁÙ…Ù†ÙŠŰ©:"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Domain name"
-msgstr "Ű§ŰłÙ… Ű§Ù„Ù†Ű·Ű§Ù‚"
+msgid "Sweden"
+msgstr "Ű§Ù„ŰłÙˆÙŠŰŻ"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "CHAP"
-msgstr "CHAP"
+msgid "Use Expect for SSH"
+msgstr "ۧ۳ŰȘŰźŰŻÙ… Expect لـSSH"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Script-based"
-msgstr "Script-based"
+msgid "Poland"
+msgstr "ŰšÙˆÙ„Ù†ŰŻŰ§"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Terminal-based"
-msgstr "Terminal-based"
+msgid "Importance: %s\n"
+msgstr "Ű§Ù„ŰŁÙ‡Ù…ÙŠŰ©: %s\n"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+# c-format
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr "ÙŰ¶Ù„Ű§ قم ŰšŰ§Ù„ŰȘŰŁŰŽÙŠŰ± Ù‡Ù†Ű§ ۧ۰ۧ كنŰȘ ŰȘŰ±ÙŠŰŻ ۧ۟۱ۧۏ Ű§Ù„ŰŽŰ±ÙŠŰ· ŰšŰčŰŻ Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ."
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Login ID"
-msgstr "Ű§ŰłÙ… Ű§Ù„ŰŻŰźÙˆÙ„"
+msgid "Other ports"
+msgstr "Ù…Ù†Ű§ÙŰ° ŰŁŰźŰ±Ù‰"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Phone number"
-msgstr "Ű±Ù‚Ù… Ű§Ù„ŰȘّليفون "
+msgid "number of capture buffers for mmap'ed capture"
+msgstr "number of capture buffers for mmap'ed capture"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Connection name"
-msgstr "Ű§ŰłÙ… Ű§Ù„Ű„ŰȘŰ”Ű§Ù„"
+msgid "SMBus controllers"
+msgstr "مŰȘŰ­ÙƒÙ…Ű§ŰȘ SMBus"
-#: ../../network/modem.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Dialup options"
-msgstr "ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„Ű„ŰȘŰ”Ű§Ù„"
+msgid "Connection timeout (in sec)"
+msgstr "Ű§Ù„ÙˆÙ‚ŰȘ Ű§Ù„ŰŁÙ‚Ű”Ù‰ Ù„Ù„Ű§ŰȘŰ”Ű§Ù„ (ŰšŰ§Ù„Ű«ÙˆŰ§Ù†ÙŠ)"
-#: ../../network/modem.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ Ű§Ù„Ù…Ù†ÙŰ° Ű§Ù„ŰȘŰłÙ„ŰłÙ„ÙŠ Ű§Ù„Ù…Ű±ŰȘۚ۷ ŰšÙ‡ Ű§Ù„Ù…ÙˆŰŻÙ… Ù„ŰŻÙŠÙƒ."
+msgid ""
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
+msgstr ""
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Network Configuration"
-msgstr "ۧŰčۯۧۯۧŰȘ Ű§Ù„ŰŽŰšÙƒŰ©"
+msgid "Croatian"
+msgstr "Ű§Ù„ÙƒŰ±ÙˆŰ§ŰȘÙŠŰ©"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Use existing partition"
+msgstr "ۧ۳ŰȘŰźŰŻÙ… Ű§Ù„ŰȘŰŹŰČۊۧŰȘ Ű§Ù„Ù…ÙˆŰŹÙˆŰŻŰ©"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
-msgstr ""
-"ŰžÙ‡Ű±ŰȘ Ù…ŰŽŰ§ÙƒÙ„ ŰŁŰ«Ù†Ű§ŰĄ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ.\n"
-"ۧ۟ŰȘۚ۱ Ű§Ù„ÙˆŰ”Ù„Ű© ۚۧ۳ŰȘŰźŰŻŰ§Ù… net_monitor ŰŁÙˆ mcc. ۧ۰ۧ لم ŰȘŰčمل Ű§Ù„ÙˆŰ”Ù„Ű©, ÙÙ‚ŰŻ ŰȘŰ±ÙŠŰŻ ۧŰčۧۯ۩ "
-"Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ©."
+msgid "Unable to contact mirror %s"
+msgstr "ŰȘŰč۰۱ ۧ?ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ù…Ű±ŰąŰ© %s"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"ŰšŰčŰŻ Űčمل Ű°Ù„Ùƒ, Ù†Ù†Ű”Ű­ ۚۄŰčۧۯ۩ ŰȘŰŽŰșيل ŰšÙŠŰŠŰ© X Ù„ŰŻÙŠÙƒ لŰȘÙŰ§ŰŻÙŠ ŰŁÙŠ Ù…ŰŽŰ§ÙƒÙ„ ŰȘŰȘŰčلق ŰšŰ„ŰłÙ… "
-"Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ."
+msgid "/Help/_About..."
+msgstr "/Ù…ŰłŰ§ŰčŰŻŰ©/_Ű­ÙˆÙ„ Ű§Ù„ŰšŰ±Ù†Ű§Ù…ŰŹ..."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"ŰȘÙ‡Ű§Ù†ÙŠÙ†Ű§, Ű§Ù†ŰȘهŰȘ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰŽŰšÙƒŰ© و Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ.\n"
-"ŰłÙŠŰȘم ŰȘŰ·ŰšÙŠÙ‚ Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ© Űčلى Ù†ŰžŰ§Ù…Ùƒ Ű§Ù„ŰąÙ†.\n"
-"\n"
+msgid "Remove user directories before restore."
+msgstr "Ű§Ű­Ű°Ù ŰŁŰŻÙ„Ű© Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…ÙŠÙ† Ù‚ŰšÙ„ Ű§Ù„Ű„ŰłŰȘŰčۧۯ۩"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
msgstr ""
-"ŰžÙ‡Ű±ŰȘ Ù…ŰŽÙƒÙ„Ű© ŰŁŰ«Ù†Ű§ŰĄ ۧŰčۧۯ۩ ŰȘŰŽŰșيل Ű§Ù„ŰŽŰšÙƒŰ©: \n"
-"\n"
-"%s"
+"ŰŁÙ†ŰȘ Űčلى ÙˆŰŽÙƒ ŰȘÙ‡ÙŠŰŠŰ© ۷ۧۚŰčŰ© ŰšŰčÙŠŰŻŰ©. Ù‡Ű°Ű§ ÙŠŰ­ŰȘۧۏ Ű§Ù„Ù‰ ŰŁÙ† ŰȘكون ÙˆŰ”Ù„Ű© Ű§Ù„ŰŽŰšÙƒŰ© ŰȘŰčمل و لكن "
+"Ű§Ù„ŰŽŰšÙƒŰ© لم يŰȘم ۧŰčŰŻŰ§ŰŻÙ‡Ű§ Ű­ŰȘى Ű§Ù„ŰąÙ†. ۧ۰ۧ كنŰȘ ŰȘŰ±ÙŠŰŻ Ű§Ù„Ù…ŰȘۧۚŰčŰ© ŰŻÙˆÙ† ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰŽŰšÙƒŰ©, "
+"ŰłŰȘكون Ù‚Ű§ŰŻŰ±Ű§Ù‹ Űčلى ۧ۳ŰȘŰźŰŻŰ§Ù… Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„ŰȘي ŰȘÙ‚Ű©Ù… ŰšŰȘÙ‡ÙŠŰŠŰȘÙ‡Ű§ Ű§Ù„ŰąÙ†. كيف ŰȘŰ±ÙŠŰŻ Ű§Ù„Ù…ŰȘۧۚŰčŰ©ŰŸ"
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr "ÙŠŰŹŰš ۧŰčۧۯ۩ ŰȘŰŽŰșيل Ű§Ù„ŰŽŰšÙƒŰ©. هل ŰȘŰ±ÙŠŰŻ ۧŰčۧۯ۩ ŰȘŰŽŰșÙŠÙ„Ù‡Ű§ ۟"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "CUPS printer configuration"
+msgstr "Ű„ŰčۯۧۯۧŰȘ Ù…ŰŽŰ§Ű±ÙƒŰ© ۷ۧۚŰčۧŰȘ CUPS"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Network configuration"
-msgstr "ۧŰčۯۧۯۧŰȘ Ű§Ù„ŰŽŰšÙƒŰ©"
+msgid "could not find any font in your mounted partitions"
+msgstr "لم ŰŁŰȘمكن من Ű§ÙŠŰŹŰ§ŰŻ ŰŁÙŠ ŰźŰ·ÙˆŰ· في ŰȘŰŹŰČۊۧŰȘك Ű§Ù„Ù…Ű­Ù…Ù„Ű©"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "هل ŰȘŰ±ÙŠŰŻ ۚۯۥ Ű§Ù„ÙˆŰ”Ù„Ű© ŰčÙ†ŰŻ Ű§Ù„Ű„Ù‚Ù„Ű§Űč۟"
+msgid "F00f bug"
+msgstr "F00f bug"
-#: ../../network/netconnect.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Internet connection"
-msgstr "ÙˆŰ”Ù„Ű© Ű§Ù†ŰȘŰ±Ù†ŰȘ"
+msgid "XFree %s"
+msgstr "XFree %s"
-#: ../../network/netconnect.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
msgstr ""
-"Ù„Ù‚ŰŻ قمŰȘ ŰšŰȘÙ‡ÙŠŰŠŰ© Ű·Ű±Ù‚ مŰȘŰčŰŻŰŻŰ© Ù„Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ.\n"
-"ۧ۟ŰȘ۱ Ű§Ù„Ű·Ű±ÙŠÙ‚Ű© Ű§Ù„ŰȘي ŰȘŰ±ÙŠŰŻ ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡Ű§.\n"
-"\n"
+"ŰŁÙŠ Űčميل DHCP ŰȘŰ±ÙŠŰŻ ŰŁÙ† ŰȘŰłŰȘŰźŰŻÙ…ŰŸ\n"
+"Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠ هو dhcp-client."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "ۧ۟ŰȘ۱ Ű§Ù„ÙˆŰ”Ù„Ű© Ű§Ù„ŰȘي ŰȘŰ±ÙŠŰŻ ŰȘÙ‡ÙŠŰŠŰȘÙ‡Ű§"
+msgid "Domain Name:"
+msgstr "Ű§ŰłÙ… Ű§Ù„Ù†Ű·Ű§Ù‚:"
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "ethernet card(s) detected"
-msgstr "ŰȘم Ű§ÙƒŰȘŰŽŰ§Ù ŰšŰ·Ű§Ù‚Ű©/ŰšŰ·Ű§Ù‚Ű§ŰȘ Ű§ÙŠŰ«Ű±Ù†ŰȘ"
+msgid "On Floppy"
+msgstr "Űčلى Ù‚Ű±Ű” Ù…Ű±Ù†"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LAN connection"
-msgstr "ÙˆŰ”Ù„Ű© LAN"
+msgid "Restore"
+msgstr "ۧ۳ŰȘŰčۧۯ۩"
-#: ../../network/netconnect.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "cable connection detected"
-msgstr "ŰȘم Ű§ÙƒŰȘŰŽŰ§Ù ÙˆŰ”Ù„Ű© ÙƒÙŠŰšÙ„"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
+msgstr "if set to yes, check if the network devices are in promiscuous mode."
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Cable connection"
-msgstr "ÙˆŰ”Ù„Ű© ÙƒÙŠŰšÙ„"
+msgid "Looking for available packages..."
+msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰčŰ«ÙˆŰ± Űčلى Ű§Ù„Ű­ŰČم Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű©..."
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "detected"
-msgstr "ŰȘم Ű§ÙƒŰȘŰŽŰ§ÙÙ‡"
+msgid "Init Message"
+msgstr "Ű±ŰłŰ§Ù„Ű© Init"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "ADSL connection"
-msgstr "ÙˆŰ”Ù„Ű© ADSL"
+msgid "Rescue partition table"
+msgstr "Ű„Ù†Ù‚Ű§Ű° ŰŹŰŻÙˆÙ„ Ű§Ù„ŰȘÙ‚ŰłÙŠÙ…"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "detected %s"
-msgstr "ŰȘم Ű§ÙƒŰȘŰłŰ§Ù %s"
+msgid "Connection complete."
+msgstr "ŰȘم Ű§Ù„Ű„ŰȘŰ”Ű§Ù„."
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "ISDN connection"
-msgstr "ÙˆŰ”Ù„Ű© ISDN"
+msgid "Cyprus"
+msgstr "Ù‚ŰšŰ±Ű”"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Winmodem connection"
-msgstr "ÙˆŰ”Ù„Ű© Winmodem"
+msgid "Remove from RAID"
+msgstr "ۧŰČŰ§Ù„Ű© من RAID"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "detected on port %s"
-msgstr "ŰȘم Ű§ÙƒŰȘŰŽŰ§ÙÙ‡ Űčلى Ű§Ù„Ù…Ù†ÙŰ° %s"
+msgid "This encryption key is too simple (must be at least %d characters long)"
+msgstr "مفŰȘۭۧ Ű§Ù„ŰȘŰŽÙÙŠŰ± Ù‡Ű°Ű§ ŰšŰłÙŠŰ· ۏۯۧ (ÙŠŰŹŰš ŰŁÙ† يكون %d Ű­Ű±ÙŰ§ Űčلى Ű§Ù„ŰŁÙ‚Ù„)"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Configuration Wizards"
+msgstr "مŰčŰ§Ù„ŰŹŰ§ŰȘ Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ©"
#: ../../network/netconnect.pm:1
#, c-format
-msgid "Normal modem connection"
-msgstr "ÙˆŰ”Ù„Ű© Ù…ÙˆŰŻÙ… ŰčŰ§ŰŻÙŠŰ©"
+msgid "ISDN connection"
+msgstr "ÙˆŰ”Ù„Ű© ISDN"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Detecting devices..."
-msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰȘŰ­Ù‚Ù‚ من Ű§Ù„ŰŁŰŹÙ‡ŰČŰ©..."
+msgid "primary"
+msgstr "ŰŁŰłŰ§ŰłÙŠ"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Expert Mode"
-msgstr "ÙˆŰ¶ŰčÙŠŰ© Ű§Ù„ŰźŰšÙŠŰ±"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr "Űčلى ŰźŰ§ŰŻÙ… SMB/Windows \"%s\", Ű§Ù„Ù…ŰŽŰ§Ű±ÙƒŰ© \"%s\""
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
+"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
+"\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
+msgstr ""
+"Ù‡Ű°Ù‡ Ű§Ù„ŰźŰ·ÙˆŰ© هي ?ŰźŰȘÙŠŰ§Ű± Ű§Ù„ŰźŰŻÙ…Ű§ŰȘ Ű§Ù„ŰȘي ŰłÙŠŰȘم ŰȘŰŽŰșÙŠÙ„Ù‡Ű§ ŰčÙ†ŰŻ ۚۯۥ Ű§Ù„ŰȘŰŽŰșيل.\n"
+"\n"
+"ŰłÙŠÙ‚ÙˆÙ… DrakX ŰšŰč۱۶ Ù‚Ű§ŰŠÙ…Ű© ŰšÙƒÙ„ Ű§Ù„ŰźŰŻÙ…Ű§ŰȘ Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű© في Ù‡Ű°Ű§ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ.\n"
+"۱ۧۏŰč كل ŰźŰŻÙ…Ű© ŰšŰȘمŰčن و قم ۚۄŰČŰ§Ù„Ű© Ű§Ù„ŰȘŰŁŰŽÙŠŰ± من ŰȘلك Ű§Ù„ŰźŰŻÙ…Ű§ŰȘ Ű§Ù„ŰȘي ? ŰȘŰ­ŰȘŰ§ŰŹÙ‡Ű§\n"
+"ŰšŰŽÙƒÙ„ ŰŻŰ§ŰŠÙ… ŰčÙ†ŰŻ ۧ?Ù‚Ù„Ű§Űč.\n"
+"\n"
+"ŰłÙŠŰȘم Űč۱۶ ێ۱ۭ Ù‚Ű”ÙŠŰ± Ű­ÙˆÙ„ Ű§Ù„ŰźŰŻÙ…Ű© ŰčÙ†ŰŻ\n"
+"ۧ۟ŰȘÙŠŰ§Ű±Ù‡Ű§. ŰčÙ…ÙˆÙ…Ű§Ù‹, ۧ۰ۧ لم ŰȘكن مŰȘŰŁÙƒŰŻ Ù…Ű§ ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ű§Ù„ŰźŰŻÙ…Ű© Ù…ÙÙŠŰŻŰ© ŰŁÙ… ?,\n"
+"فمن ۧ?ÙŰ¶Ù„ ŰȘŰ±Ùƒ Ű§Ù„ŰźÙŠŰ§Ű± ۧ?فŰȘŰ±Ű§Ű¶ÙŠ.\n"
+"\n"
+"!! في Ù‡Ű°Ù‡ Ű§Ù„Ù…Ű±Ű­Ù„Ű© كن Ű­Ű°Ű±Ű§Ù ۧ۰ۧ كنŰȘ ŰȘŰ±ÙŠŰŻ ۧ۳ŰȘŰźŰŻŰ§Ù… Ù…Ű§ÙƒÙŠÙ†ŰȘك\n"
+"ÙƒŰźŰ§ŰŻÙ…: Ű±ŰšÙ…Ű§ لن ŰȘŰ±ÙŠŰŻ ۚۯۥ ŰŁÙŠ ŰźŰŻÙ…Ű§ŰȘ ? ŰȘŰ­ŰȘŰ§ŰŹÙ‡Ű§.\n"
+"ÙŰ¶Ù„Ű§Ù‹ ŰȘŰ°ÙƒŰ± ŰŁÙ† Ű§Ù„ŰčŰŻÙŠŰŻ من Ű§Ù„ŰźŰŻÙ…Ű§ŰȘ Ù‚ŰŻ ŰȘكون ۟۷۱۩ ۧ۰ۧ ÙƒŰ§Ù†ŰȘ\n"
+"مŰȘۭۧ۩ Űčلى Ű§Ù„ŰźŰ§ŰŻÙ…. ŰšŰŽÙƒÙ„ ŰčŰ§Ù… ۧ۟ŰȘ۱ ÙÙ‚Ű· Ű§Ù„ŰźŰŻÙ…Ű§ŰȘ Ű§Ù„ŰȘي ŰȘŰ­ŰȘŰ§ŰŹÙ‡Ű§.\n"
+"!!"
+
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use auto detection"
-msgstr "ۧ۳ŰȘŰźŰŻÙ… Ű§Ù„ŰȘŰ­Ù‚Ù‚ Ű§Ù„ŰąÙ„ÙŠ"
+msgid "Skip"
+msgstr "ŰȘŰźŰ·ÙŠ"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose the profile to configure"
-msgstr "ۧ۟ŰȘ۱ Ű§Ù„ŰȘŰŽÙƒÙŠÙ„ Ű§Ù„Ű°ÙŠ ŰȘŰ±ÙŠŰŻ ŰȘÙ‡ÙŠŰŠŰȘه"
+msgid "Niue"
+msgstr "نيوي"
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
msgstr ""
-"ŰŁÙ‡Ù„Ű§Ù‹ ŰšÙƒ في مŰčŰ§Ù„ŰŹ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰŽŰšÙƒŰ©.\n"
-"\n"
-"Ù†Ű­Ù† Űčلى ÙˆŰŽÙƒ ŰȘÙ‡ÙŠŰŠŰ© ÙˆŰ”Ù„Ű© Ű§Ù„ŰŽŰšÙƒŰ©/Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙƒ.\n"
-"ۧ۰ۧ لم ŰȘŰ±ÙŠŰŻ ۧ۳ŰȘŰźŰŻŰ§Ù… Ű§Ù„ŰȘŰ­Ù‚Ù‚ Ű§Ù„ŰąÙ„ÙŠ, Ű§Ű­Ű°Ù Ű§Ù„ŰȘŰŁŰŽÙŠŰ± من Űčلى Ű§Ù„Ű”Ù†ŰŻÙˆÙ‚.\n"
+"ŰȘÙ†ŰŽŰ·/ŰȘŰźÙ…ŰŻ كل ÙˆŰ§ŰŹÙ‡Ű§ŰȘ Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…Ù‡ÙŠŰŠŰ© كي ŰȘۚۯۣ\n"
+"ŰčÙ†ŰŻ ۚۯۥ Ű§Ù„Ű„Ù‚Ù„Ű§Űč."
-#: ../../network/netconnect.pm:1
-#, c-format
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
msgstr ""
-"Ù„ŰŁÙ†Ùƒ ŰȘقوم ŰšŰ§Ù„ŰȘŰ«ŰšÙŠŰȘ Űčۚ۱ Ű§Ù„ŰŽŰšÙƒŰ©, ÙÙ‚ŰŻ ŰȘمŰȘ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰŽŰšÙƒŰ© Ù…ŰłŰšÙ‚Ű§Ù‹.\n"
-"Ű§Ù†Ù‚Ű± Ù…ÙˆŰ§ÙÙ‚ Ù„Ű­ÙŰž Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙƒ, ŰŁÙˆ Ű§Ù†Ù‚Ű± Ű§Ù„Űșۧۥ Ù„Ű„Űčۧۯ۩ ŰȘÙ‡ÙŠŰŠŰ© ÙˆŰ”Ù„Ű§ŰȘ Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ "
-"و Ű§Ù„ŰŽŰšÙƒŰ©.\n"
+"ŰȘ۱ۯۯ Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ ŰšŰ§Ù„Ù…ÙŠŰșŰ§Ù‡ÙŠŰ±ŰȘŰČ (Ű§Ù„Ù…ÙŠŰșŰ§Ù‡ÙŠŰ±ŰȘŰČ ŰȘŰŽÙŠŰ± Ű§Ù„Ù‰ Ű§Ù„ŰčŰŻŰŻ Ű§Ù„ŰȘÙ‚Ű±ÙŠŰšÙŠ من Ű§Ù„ŰȘŰčÙ„ÙŠÙ…Ű§ŰȘ "
+"Ű§Ù„ŰȘي ÙŠŰłŰȘŰ·ÙŠŰč Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ ŰȘÙ†ÙÙŠŰ°Ù‡Ű§ في Ű§Ù„Ű«Ű§Ù†ÙŠŰ© Ű§Ù„ÙˆŰ§Ű­ŰŻŰ©)"
-#: ../../network/netconnect.pm:1
+#: ../../pkgs.pm:1
+#, c-format
+msgid "important"
+msgstr "مهم"
+
+#: ../../standalone/drakbackup:1
#, c-format
+msgid "Total Progress"
+msgstr "Ű§ŰŹÙ…Ű§Ù„ÙŠ Ű§Ù„ŰȘÙ‚ŰŻÙ…"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
"\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
msgstr ""
+"ŰłÙŠÙ‚ÙˆÙ… DrakX ŰŁÙˆ?ً ŰšŰ§Ù„ŰȘŰ­Ù‚Ù‚ من ÙˆŰŹÙˆŰŻ ŰŁŰŹÙ‡ŰČŰ© IDE Űčلى Ù‡Ű°Ű§ Ű§Ù„ÙƒÙ…ŰšÙŠÙˆŰȘ۱. ŰłÙŠÙ‚ÙˆÙ…\n"
+"ŰŁÙŠŰ¶Ű§Ù‹ ŰšŰ§Ù„ŰšŰ­Ű« Űčن ŰšŰ·Ű§Ù‚Ű§ŰȘ PCI SCSI Űčلى Ù†ŰžŰ§Ù…Ùƒ. ۧ۰ۧ ŰȘم Ű§ÙŠŰŹŰ§ŰŻ ŰšŰ·Ű§Ù‚Ű©\n"
+"SCSI,ŰłÙŠÙ‚ÙˆÙ… DrakX ŰšŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ù…ŰŽŰșل Ű§Ù„Ù…Ù†Ű§ŰłŰš ŰŁÙˆŰȘÙˆÙ…Ű§ŰȘÙŠÙƒÙŠŰ§Ù‹.\n"
"\n"
+"و ?ن ŰčÙ…Ù„ÙŠŰ© Ű§Ù„ŰȘŰ­Ù‚Ù‚ من Ű§Ù„ŰčŰȘۧۯ Ù„ÙŠŰłŰȘ ŰźŰ§Ù„ÙŠŰ© من ۧ?۟۷ۧۥ, ŰłÙŠÙ‚ÙˆÙ… DrakX ŰšŰłŰ€Ű§Ù„Ùƒ ŰčÙ…Ù‘Ű§ "
+"ۧ۰ۧ\n"
+"ÙƒŰ§Ù†ŰȘ Ù„ŰŻÙŠÙƒ ŰšŰ·Ű§Ù‚Ű© PCI SCSI. Ű§Ù„Ù†Ù‚Ű± Űčلى \"نŰčم\" ŰłÙŠŰč۱۶ Ù‚Ű§ŰŠÙ…Ű© ŰšŰšŰ·Ű§Ù‚Ű§ŰȘ SCSI\n"
+"لŰȘŰźŰȘۧ۱ Ù…Ù†Ù‡Ű§. Ű§Ù†Ù‚Ű± \"?\" ۧ۰ۧ كنŰȘ ŰȘŰčلم ŰŁÙ†Ù‡ ? ŰȘÙˆŰŹŰŻ ŰšŰ·Ű§Ù‚Ű§ŰȘ SCSI Űčلى\n"
+"Ù…Ű§ÙƒÙŠÙ†ŰȘك. ۧ۰ۧ لم ŰȘكن مŰȘŰŁÙƒŰŻŰ§Ù‹, يمكنك Ű§Ù„ŰȘŰŁÙƒŰŻ من Ù‚Ű§ŰŠÙ…Ű© Ű§Ù„ŰčŰȘۧۯ Ű§Ù„ŰȘي ŰȘم Ű§ÙŠŰŹŰ§ŰŻÙ‡Ű§\n"
+"Űčلى Ù…Ű§ÙƒÙŠÙ†ŰȘك Űčن Ű·Ű±ÙŠÙ‚ ۧ۟ŰȘÙŠŰ§Ű± \"Űč۱۶ مŰčÙ„ÙˆÙ…Ű§ŰȘ Ű§Ù„ŰčŰȘۧۯ\" و Ù†Ù‚Ű±\n"
+"\"Ű§Ù„ŰȘŰ§Ù„ÙŠ->\". ŰȘŰŁÙƒŰŻ من Ù‚Ű§ŰŠÙ…Ű© Ű§Ù„ŰčŰȘۧۯ Ű«Ù… ۧ۶ŰșŰ· Űčلى ŰČ۱ \"Ű§Ù„ŰȘŰ§Ù„ÙŠ\n"
+"->\" للŰčÙˆŰŻŰ© Ű§Ù„Ù‰ ŰŽŰ€Ű§Ù„ ÙˆŰ§ŰŹÙ‡Ű© SCSI.\n"
"\n"
+"ۧ۰ۧ ۧ۶۷۱۱ŰȘ Ű§Ù„Ù‰ ŰȘŰ­ŰŻÙŠŰŻ Ù…ÙˆŰ§ŰŠÙ… PCI SCSI ÙŠŰŻÙˆÙŠŰ§Ù‹, ÙŰłÙŠŰłŰŁÙ„Ùƒ DrakX ŰčÙ…Ù‘Ű§ ۧ۰ۧ كنŰȘ\n"
+"ŰȘŰ±ÙŠŰŻ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙ‡Ű§. ÙŠŰŹŰš ŰŁÙ† ŰȘŰłÙ…Ű­ لـ DrakX ŰšŰŁÙ† يŰȘŰ­Ù‚Ù‚ من\n"
+"Ű§Ù„ŰčŰȘۧۯ Ù„Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„ŰźŰ§Ű”Ű© ŰšŰ§Ù„ŰšŰ·Ű§Ù‚Ű© و Ű§Ù„ŰȘي ÙŠÙŒÙŰ­ŰȘۧۏ Ű§Ù„ÙŠÙ‡Ű§ ليŰȘم ۚۯۥ\n"
+"Űčمل Ű§Ù„ŰšŰ·Ű§Ù‚Ű©. في ŰŁŰșÙ„Űš ۧ?ÙˆÙ‚Ű§ŰȘ, ŰłÙŠÙ‚ÙˆÙ… DrakX ŰšŰ§Ù„ŰźŰ·ÙˆŰ© ŰŻÙˆÙ† ŰŁÙŠ\n"
+"Ù…ŰŽŰ§ÙƒÙ„.\n"
"\n"
-"Ù†Ű­Ù† Ű§Ù„ŰąÙ† ŰłÙ†Ù‚ÙˆÙ… ŰšŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ÙˆŰ”Ù„Ű© %s.\n"
-"\n"
-"ۧ۶ŰșŰ· Ù…ÙˆŰ§ÙÙ‚ للمŰȘۧۚŰčŰ©."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Ù†Ű­Ù† Ű§Ù„ŰąÙ† ŰłÙ†Ù‚ÙˆÙ… ŰšŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ÙˆŰ”Ù„Ű© %s."
+"ۧ۰ۧ لم يŰȘمكن DrakX من Ű§Ù„ŰȘŰčŰ±Ù Űčلى Ű§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„Ű¶Ű±ÙˆŰ±ÙŠŰ©Ù„ŰȘÙ…Ű±ÙŠŰ±Ù‡Ű§\n"
+"Ű§Ù„Ù‰ Ű§Ù„ŰčŰȘۧۯ, ففي Ù‡Ű°Ù‡ Ű§Ù„Ű­Ű§Ù„ ŰłŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ ŰȘÙ‡ÙŠŰŠŰ©\n"
+"Ű§Ù„Ù…ŰŽŰșّل ÙŠŰŻÙˆÙŠŰ§Ù‹."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Internet connection & configuration"
-msgstr "ÙˆŰ”Ù„Ű© Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ و Ű§Ù„Ű„ŰčۯۧۯۧŰȘ"
+msgid "Users"
+msgstr "Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…ÙˆÙ†"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configure the connection"
-msgstr "قم ۚۄŰčۯۧۯ Ű§Ù„Ű„ŰȘŰ”Ű§Ù„"
+msgid "Aruba"
+msgstr "ŰŁŰ±ÙˆŰšŰ§"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Disconnect"
-msgstr "Ű§Ù‚Ű·Űč Ű§Ù„Ű„ŰȘŰ”Ű§Ù„"
+msgid "Preparing bootloader..."
+msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰ­Ű¶ÙŠŰ± Ù…Ű­Ù…Ù‘Ù„ Ű§Ù„Ű„Ù‚Ù„Ű§Űč..."
-#: ../../network/netconnect.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Connect"
-msgstr "ۧŰȘŰ”Ù„"
+msgid "Gateway (e.g. %s)"
+msgstr "Ű§Ù„ŰšÙˆŰ§ŰšŰ© (Ù…Ű«Ù„Ű§Ù‹ %s)"
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"يمكنك ۧŰčۧۯ۩ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ÙˆŰ”Ù„Ű©."
+msgid "The passwords do not match"
+msgstr "ÙƒÙ„Ù…Ű§ŰȘ Ű§Ù„Ù…Ű±ÙˆŰ± ŰșÙŠŰ± مŰȘŰ·Ű§ŰšÙ‚Ű©"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"يمكنك Ű§Ù„ŰąÙ† Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ ŰŁÙˆ ۧŰčۧۯ۩ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ÙˆŰ”Ù„Ű©."
+msgid "Examples for correct IPs:\n"
+msgstr "ŰŁÙ…Ű«Ù„Ű© لŰčÙ†Ű§ÙˆÙŠÙ† IP Ű”Ű­ÙŠŰ­Ű©:\n"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "ŰŁÙ†ŰȘ Ù„ŰłŰȘ مŰȘŰ”Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ Ű­Ű§Ù„ÙŠŰ§Ù‹"
+msgid "Frequency (MHz)"
+msgstr "Ű§Ù„ŰȘ۱ۯۯ (ميŰșŰ§Ù‡ÙŠŰ±ŰȘŰČ)"
-#: ../../network/netconnect.pm:1
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
msgstr ""
-"\n"
-"يمكنك Ù‚Ű·Űč Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰŁÙˆ ۧŰčۧۯ۩ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ÙˆŰ”Ù„Ű©."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "You are currently connected to the Internet."
-msgstr "ŰŁÙ†ŰȘ مŰȘŰ”Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ Ű­Ű§Ù„ÙŠŰ§Ù‹"
+"Ù„Ű§ŰłŰȘŰźŰŻŰ§Ù… ۧ۟ŰȘÙŠŰ§Ű±Ű§ŰȘك Ű§Ù„Ù…Ű­ÙÙˆŰžŰ© Ù„Ù„Ű­ŰČم, قم ۚۚۯۥ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ مŰč ŰźÙŠŰ§Ű± ``linux "
+"defcfg=floppy''"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "ÙŠŰŹŰš ŰŁÙ† ÙŠŰšŰŻŰŁ Ű§Ù„ŰčÙ†ÙˆŰ§Ù† ŰšÙ€ 'ftp:' ŰŁÙˆ 'http:'"
+msgid "the number of the processor"
+msgstr "Ű±Ù‚Ù… Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ"
-#: ../../network/network.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Proxy should be http://..."
-msgstr "Ű§Ù„ŰšŰ±ÙˆÙƒŰłÙŠ ÙŠŰŹŰš ŰŁÙ† يكون http://..."
+msgid "Hardware clock set to GMT"
+msgstr "۳ۧŰčŰ© Ű§Ù„ŰŹÙ‡Ű§ŰČ Ù…Ű¶ŰšÙˆŰ·Ű© Űčلى ŰȘوقيŰȘ ŰșŰ±ÙŠÙ†ŰȘŰŽ"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "FTP proxy"
-msgstr "ŰšŰ±ÙˆÙƒŰłÙŠ FTP"
+msgid "Give a file name"
+msgstr "ۧŰčŰ· Ű§ŰłÙ… ملف"
-#: ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "HTTP proxy"
-msgstr "ŰšŰ±ÙˆÙƒŰłÙŠ HTTP"
+msgid "Please choose the port that your printer is connected to."
+msgstr "۱ۏۧۥ ۧ۟ŰȘ۱ Ű§Ù„Ù…Ù†ÙŰ° Ű§Ù„Ù…ÙˆŰ”Ù„Ű© Ű„Ù„ÙŠÙ‡ ۷ۧۚŰčŰȘك."
-#: ../../network/network.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "Proxies configuration"
-msgstr "ۧŰčۯۧۯۧŰȘ Ű§Ù„ŰšŰ±ÙˆÙƒŰłÙŠ"
+msgid "Change Cd-Rom"
+msgstr "ŰșÙŠÙ‘Ű± Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹ"
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "ŰčÙ†ÙˆŰ§Ù† Ű§Ù„ŰšÙˆŰ§ŰšŰ§ŰȘ ÙŠŰŹŰš ŰŁÙ† ŰȘكون Űčلى Ű§Ù„Ù†ŰłÙ‚ 1.2.3.4"
+msgid "Paraguay"
+msgstr "Ű§Ù„ŰšŰ§Ű±ŰŹÙˆŰ§ÙŠ"
-#: ../../network/network.pm:1
-#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "ŰčÙ†ÙˆŰ§Ù† ŰźŰ§ŰŻÙ… DNS ÙŠŰŹŰš ŰŁÙ† يكون Űčلى Ű§Ù„Ù†ŰłÙ‚ 1.2.3.4"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
+msgstr "ۧ۳ŰȘŰźŰŻÙ… Ű§Ù„Ù†ŰłŰź Ű§Ù„ŰȘŰ±Ű§ÙƒÙ…ÙŠ (Ù„Ű§ ŰȘŰłŰȘŰšŰŻÙ„ Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠŰ© Ű§Ù„Ù‚ŰŻÙŠÙ…Ű©)"
-#: ../../network/network.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Gateway device"
-msgstr "ŰŹÙ‡Ű§ŰČ Ű§Ù„ŰšÙˆŰ§ŰšŰ©"
+msgid "There's no known driver for your sound card (%s)"
+msgstr "Ù„Ű§ ÙŠÙˆŰŹŰŻ Ù…ŰŽŰșل مŰčŰ±ÙˆÙ Ù„ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű”ÙˆŰȘ (%s)"
-#: ../../network/network.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Ű§Ù„ŰšÙˆŰ§ŰšŰ© (Ù…Ű«Ù„Ű§Ù‹ %s)"
+msgid "force"
+msgstr "ۧۏۚۧ۱"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DNS server"
-msgstr "ŰźŰ§ŰŻÙ… DNS"
+msgid "Exit"
+msgstr "ŰźŰ±ÙˆŰŹ"
-#: ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
msgstr ""
-"ÙŰ¶Ù„Ű§Ù‹ ŰŁŰŻŰźÙ„ Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ.\n"
-"ÙŠŰŹŰš ŰŁÙ† يكون Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ Ű”Ű§Ù„Ű­Ű§Ù‹ و ÙƒŰ§Ù…Ù„Ű§Ù‹,\n"
-"Ù…Ű«Ù„ ``mybox.mylab.myco.com''.\n"
-"يمكنك ŰŁÙŠŰ¶Ű§Ù‹ Ű§ŰŻŰźŰ§Ù„ ŰčÙ†ÙˆŰ§Ù† IP Ű§Ù„ŰźŰ§Ű” ŰšŰ§Ù„ŰšÙˆŰ§ŰšŰ© Ű§Ù† ÙˆÙŰŹŰŻŰȘ."
+"Ù…Ù„Ű­ÙˆŰžŰ©: ۧŰčŰȘÙ…Ű§ŰŻŰ§Ù‹ Űčلى ۷۱ۧŰČ Ű§Ù„Ű·Ű§ŰšŰčŰ© و Ù†ŰžŰ§Ù… Ű§Ù„Ű·ŰšŰ§ŰčŰ© ÙŰłÙŠŰȘم ŰȘŰ«ŰšÙŠŰȘ Ű­ÙˆŰ§Ù„ÙŠ %d "
+"ميŰșŰ§ŰšŰ§ÙŠŰȘ من Ű§Ù„ŰšŰ±Ù…ŰŹÙŠŰ§ŰȘ Ű§Ù„Ű„Ű¶Ű§ÙÙŠŰ©."
-#: ../../network/network.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
msgstr ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
+"لم ŰȘقم ŰšŰȘÙ‡ÙŠŰŠŰ© ŰŁÙŠ ÙˆŰ§ŰŹÙ‡Ű§ŰȘ.\n"
+"قم ŰšŰȘÙ‡ÙŠŰŠŰȘهم ŰŁÙˆÙ„Ű§ Űčن Ű·Ű±ÙŠÙ‚ Ű§Ù„Ű¶ŰșŰ· Űčلى 'ŰȘÙ‡ÙŠŰŠŰ©'"
-#: ../../network/network.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
-msgstr ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
+msgid "Estonian"
+msgstr "Ű§Ù„Ű„ŰłŰȘÙˆÙ†ÙŠŰ©"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "ŰčÙ†ÙˆŰ§Ù† IP ÙŠŰŹŰš ŰŁÙ† يكون Űčلى Ű§Ù„Ù†ŰłÙ‚ 1.2.3.4"
+msgid ""
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
+msgstr "Apache هو ŰźŰ§ŰŻÙ… ÙˆÙŠŰš. و ÙŠÙŰłŰȘŰźŰŻÙ… Ù„ŰźŰŻÙ…Ű© Ù…Ù„ÙŰ§ŰȘ HTML و CGI."
-#: ../../network/network.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Start at boot"
-msgstr "ۧۚۯۣ ŰčÙ†ŰŻ Ű§Ù„Ű„Ù‚Ù„Ű§Űč"
+msgid "Add/Del Clients"
+msgstr "ŰŁŰ¶Ù/Ű§Ű­Ű°Ù Ű§Ù„ŰčÙ…Ù„Ű§ŰĄ"
-#: ../../network/network.pm:1
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Űčيّن Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ من ŰčÙ†ÙˆŰ§Ù† DHCP"
+msgid "Choose the network interface"
+msgstr "ۧ۟ŰȘ۱ ÙˆŰ§ŰŹÙ‡Ű© Ű§Ù„ŰŽŰšÙƒŰ©"
-#: ../../network/network.pm:1
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Network Hotplugging"
-msgstr "Network Hotplugging"
+msgid "Unknown Model"
+msgstr "۷۱ۧŰČ ŰșÙŠŰ± مŰčŰ±ÙˆÙ"
-#: ../../network/network.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "ŰȘŰȘŰšŰč Ù‡ÙˆÙŠŰ© ŰšŰ·Ű§Ù‚Ű© Ű§Ù„ŰŽŰšÙƒŰ© (Ù…ÙÙŠŰŻ Ù„Ù„ŰŹŰ§ŰłŰšŰ§ŰȘ Ű§Ù„ŰŻÙŰȘŰ±ÙŠŰ©)"
+msgid "CD/DVD burners"
+msgstr "ŰŁŰŹÙ‡ŰČŰ© Ù†ŰłŰź CD/DVD"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DHCP host name"
-msgstr "Ű§ŰłÙ… Ù…ŰłŰȘŰ¶ÙŠÙ DHCP"
+msgid ""
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"Ű§Ù„ŰȘŰŹŰČŰŠŰ© Ű§Ù„ŰȘي يŰȘم Ű§Ù‚Ù„Ű§ŰčÙ‡Ű§ Ű§ÙŰȘŰ±Ű§Ű¶ÙŠŰ§\n"
+" (لـ MS-DOS و Ù„ÙŠŰł لـ lilo)\n"
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Netmask"
-msgstr "Netmask"
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "choose image"
+msgstr "Ű„ŰźŰȘ۱ ملف Ű”ÙˆŰ±Ű©"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "IP address"
-msgstr "ŰčÙ†ÙˆŰ§Ù† IP"
+msgid "Firewalling configuration detected!"
+msgstr "ŰȘم Ű§ÙƒŰȘŰŽŰ§Ù Ű„Űčۯۧۯ Ù„Ù„ŰŹŰŻŰ§Ű± Ű§Ù„Ù†Ű§Ű±ÙŠ!"
-#: ../../network/network.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp/zeroconf)"
+msgid "Connection name"
+msgstr "Ű§ŰłÙ… Ű§Ù„Ű„ŰȘŰ”Ű§Ù„"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Automatic IP"
-msgstr "Automatic IP"
+msgid ""
+"x coordinate of text box\n"
+"in number of characters"
+msgstr ""
+"Ű§Ù„Ű„Ű­ŰŻŰ§Ű«ÙŠ Ű§Ù„ŰłÙŠÙ†ÙŠ Ù„Ù„Ű”Ù†ŰŻÙˆÙ‚ Ű§Ù„Ù†Ű”ÙŠ\n"
+"ŰšŰčŰŻŰŻ Ű§Ù„Ű­Ű±ÙˆÙ"
-#: ../../network/network.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid " (driver %s)"
-msgstr " (driver %s)"
+msgid "Updating package selection"
+msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰ­ŰŻÙŠŰ« ۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„Ű­ŰČم"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configuring network device %s"
-msgstr "ŰŹŰ§Ű±ÙŠ ŰȘÙ‡ÙŠŰŠŰ© ŰŹÙ‡Ű§ŰČ Ű§Ù„ŰŽŰšÙƒŰ© %s"
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "ŰŁÙŠÙ† ŰȘŰ±ÙŠŰŻ ŰȘŰ­Ù…ÙŠÙ„ ملف loopback %s۟"
-#: ../../network/network.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
msgstr ""
-"ÙŰ¶Ù„Ű§Ù‹ ŰŁŰŻŰźÙ„ ŰȘÙ‡ÙŠŰŠŰ© IP Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙ‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű©.\n"
-"كل Ù…Ű§ŰŻŰ© ÙŠŰŹŰš Ű§ŰŻŰźŰ§Ù„Ù‡Ű§ كŰčÙ†ÙˆŰ§Ù† IP ŰšŰŽÙƒÙ„ Ù…Ù†Ù‚ÙˆŰ·\n"
-"(Ù…Ű«Ù„Ű§Ù‹, 1.2.3.4)."
+"ŰȘم ŰȘÙˆÙ„ÙŠŰŻ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…Ű±Ù† ŰšÙ†ŰŹŰ§Ű­.\n"
+"يمكنك Ű§Ù„ŰąÙ† ۧŰčۧۯ۩ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ."
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ŰȘŰ­Ű°ÙŠŰ±: ŰȘمŰȘ ŰȘÙ‡ÙŠŰŠŰ© Ù‡Ű°Ű§ Ű§Ù„ŰŹÙ‡Ű§ŰČ ŰłŰ§ŰšÙ‚Ű§Ù‹ Ù„Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ.\n"
-"ŰšÙƒÙ„ ۚ۳ۧ۷۩ Ű§Ù‚ŰšÙ„ ŰŁÙ† ŰȘÙŰšÙ‚ÙŠ Ù‡Ű°Ű§ Ű§Ù„ŰŹÙ‡Ű§ŰČ Ù…ŰčŰŻÙ‘.\n"
-"ŰȘŰčŰŻÙŠÙ„ Ű§Ù„Ű­Ù‚ÙˆÙ„ ŰŁŰŻÙ†Ű§Ù‡ ŰłÙŠŰșÙŠÙ‘Ű± Ù‡Ű°Ù‡ Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ©."
+msgid "the number of buttons the mouse has"
+msgstr "ŰčŰŻŰŻ ŰŁŰČ۱ۧ۱ Ű§Ù„ÙŰŁŰ±Ű©"
-#: ../../network/shorewall.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
msgstr ""
-"ŰȘŰ­Ű°ÙŠŰ±! ŰȘم Ű„ÙŠŰŹŰ§ŰŻ Ű„Űčۯۧۯ ۏۯۧ۱ Ù†Ű§Ű±ÙŠ Ù…ÙˆŰŹÙˆŰŻ Ù…ŰłŰšÙ‚Ű§. Ű±ŰšÙ…Ű§ ŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ Ű§Ű”Ù„Ű§Ű­ ÙŠŰŻÙˆÙŠ ŰšŰčŰŻ "
-"Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ."
-
-#: ../../network/shorewall.pm:1
-#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "ŰȘم Ű§ÙƒŰȘŰŽŰ§Ù Ű„Űčۯۧۯ Ù„Ù„ŰŹŰŻŰ§Ű± Ű§Ù„Ù†Ű§Ű±ÙŠ!"
+"ÙŰ¶Ù„Ű§Ù‹ ŰŁŰŻŰźÙ„ Ű§Ù„ŰŻÙ„ÙŠÙ„ (ŰŁÙˆ Ű§Ù„ÙˆŰ­ŰŻŰ©) Ű§Ù„ŰȘي ŰłÙŠŰȘم ÙÙŠÙ‡Ű§ ÙˆŰ¶Űč\n"
+" Ű§Ù„Ù†ŰłŰźŰ© Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠŰ© Űčلى Ù‡Ű°Ű§ Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ."
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Account Password"
-msgstr "ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ± Ù„Ù„Ű­ŰłŰ§Űš"
+msgid "Replay"
+msgstr "ۧŰčۧۯ۩"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Account Login (user name)"
-msgstr "Ű§ŰłÙ… Ű§Ù„Ù…ŰŻŰźÙˆÙ„ Ù„Ù„Ű­ŰłŰ§Űš"
+msgid "Backup other files"
+msgstr "Ű§Ù†ŰłŰź Ù…Ù„ÙŰ§ŰȘ ŰŁŰźŰ±Ù‰"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Ű§Ù„ÙˆÙ‚ŰȘ Ű§Ù„ŰŁÙ‚Ű”Ù‰ Ù„Ù„Ű§ŰȘŰ”Ű§Ù„ (ŰšŰ§Ù„Ű«ÙˆŰ§Ù†ÙŠ)"
+msgid "No floppy drive available"
+msgstr "Ù„Ű§ ŰȘÙˆŰŹŰŻ ŰłÙˆŰ§Ù‚Ű© ŰŁÙ‚Ű±Ű§Ű” Ù…Ű±Ù†Ű©"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Connection speed"
-msgstr "۳۱ŰčŰ© Ű§Ù„Ű„ŰȘŰ”Ű§Ù„"
+msgid "Backup files are corrupted"
+msgstr "Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ ÙŰ§ŰłŰŻŰ©"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Dialing mode"
-msgstr "ÙˆŰ¶ŰčÙŠŰ© Ű§Ù„Ű„ŰȘŰ”Ű§Ù„"
+msgid "TV norm:"
+msgstr "TV norm :"
-#: ../../network/tools.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Choose your country"
-msgstr "Ű„ŰźŰȘ۱ ŰšÙ„ŰŻÙƒ"
+msgid "Cpuid family"
+msgstr "ŰčŰ§ŰŠÙ„Ű© Ù‡ÙˆÙŠŰ© Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "DNS Ű§Ù„Ű«Ű§Ù†ÙŠ Ù„Ù„Ù…ÙˆÙŰ± (ۧ۟ŰȘÙŠŰ§Ű±ÙŠ)"
+msgid "32 MB"
+msgstr "32 ميŰșŰ§ŰšŰ§ÙŠŰȘ"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "DNS Ű§Ù„ŰŁÙˆÙ„ Ù„Ù„Ù…ÙˆÙŰ± (ۧ۟ŰȘÙŠŰ§Ű±ÙŠ)"
+msgid "Lithuanian AZERTY (new)"
+msgstr "Ű§Ù„Ù„ÙŠŰȘÙˆŰ§Ù†ÙŠŰ© AZERTY (ŰŹŰŻÙŠŰŻ)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Provider phone number"
-msgstr "Ű±Ù‚Ù… Ù‡Ű§ŰȘف Ű§Ù„Ù…ÙˆÙŰ±"
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgstr "نŰčم ŰȘŰčني ŰŁÙ† Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ Ű§Ù„Ù…ŰłŰ§ŰčŰŻ للŰčÙ…Ù„ÙŠŰ§ŰȘ Ű§Ù„Ű­ŰłŰ§ŰšÙŠŰ© Ù„ŰŻÙŠÙ‡ مŰȘŰŹÙ‡ Ù„Ù„Ű„ŰłŰȘŰ«Ù†Ű§ŰĄŰ§ŰȘ"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Ű§ŰłÙ… Ű§Ù„Ù…ÙˆÙŰ± (Ù…Ű«Ù„Ű§Ù‹ provider.net)"
+msgid ""
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
+msgstr ""
+"Ù„Ù‚ŰŻ ۧ۟ŰȘ۱ŰȘ ŰȘŰŹŰČŰŠŰ© RAID ŰšŰ±Ù…ŰŹÙŠŰ© كŰȘŰŹŰČŰŠŰ© ŰŹŰ°Ű±ÙŠŰ© (/).\n"
+"Ù„Ű§ ÙŠŰłŰȘŰ·ÙŠŰč ŰŁÙŠ Ù…Ű­Ù…Ù‘Ù„ Ű§Ù‚Ù„Ű§Űč Ű§Ù„ŰȘŰčŰ§Ù…Ù„ مŰč Ű°Ù„Ùƒ ŰšŰŻÙˆÙ† ŰȘŰŹŰČŰŠŰ© /boot.\n"
+"ÙŰ¶Ù„Ű§Ù‹ ŰȘŰŁÙƒŰŻ من Ű§Ű¶Ű§ÙŰ© ŰȘŰŹŰČŰŠŰ© /boot"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Your personal phone number"
-msgstr "Ű±Ù‚Ù… Ű§Ù„Ù‡Ű§ŰȘف Ű§Ù„ŰŽŰźŰ”ÙŠ Ű§Ù„ŰźŰ§Ű” ŰšÙƒ"
+msgid "Previous"
+msgstr "Ű§Ù„ŰłŰ§ŰšÙ‚"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "Card IO_1"
-msgstr "Card IO_1"
+msgid "Other OS (MacOS...)"
+msgstr "Ù†ŰžŰ§Ù… ۹۟۱ (MacOS...)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Card IO_0"
-msgstr "Card IO_0"
+msgid "To activate the mouse,"
+msgstr "لŰȘÙ†ŰŽÙŠŰ· Ű§Ù„ÙŰŁŰ±Ű©,"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Card IO"
-msgstr "Card IO"
+msgid "Bringing up the network"
+msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰŽŰșيل Ű§Ù„ŰŽŰšÙƒŰ©"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../common.pm:1
#, c-format
-msgid "Card mem (DMA)"
-msgstr "Card mem (DMA)"
+msgid "Screenshots will be available after install in %s"
+msgstr "ŰłŰȘكون Ù„Ù‚Ű·Ű§ŰȘ Ű§Ù„ŰŽŰ§ŰŽŰ© Ù…ÙˆŰŹÙˆŰŻŰ© ŰšŰčŰŻ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ في %s"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Card IRQ"
-msgstr "Card IRQ"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
+msgstr ""
+"في Ű§Ù„ŰŁŰčلى ŰłŰȘŰŹŰŻ ŰȘÙ‚ŰłÙŠÙ…Ű§ŰȘ Ù„ÙŠÙ†ÙƒŰł Ű§Ù„Ù…ÙˆŰŹÙˆŰŻŰ© و Ű§Ù„ŰȘي ŰȘم Ű§ÙŠŰŹŰ§ŰŻÙ‡Ű§ Űčلى Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš "
+"Ű§Ù„ŰźŰ§Ű” ŰšÙƒ.\n"
+"يمكنك ŰŁÙ† ŰȘÙŰšÙ‚ÙŠ Ű„ŰźŰȘÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ, و هي ŰŹÙŠŰŻŰ© Ù„ŰŁŰșÙ„Űš ŰŁÙ†ÙˆŰ§Űč Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ.\n"
+"ۄ۰ۧ قمŰȘ ŰšŰčمل ŰŁÙŠ ŰȘŰșÙŠÙŠŰ±Ű§ŰȘ ÙÙŠŰŹŰš Űčليك ŰŁÙ† ŰȘŰčŰ±Ù Ű§Ù„ŰȘÙ‚ŰłÙŠÙ… Ű§Ù„ŰŹŰ°Ű± (\"/\"). Ù„Ű§ ŰȘŰźŰȘ۱\n"
+"ŰȘÙ‚ŰłÙŠÙ…Ű§ŰȘ ۶ŰșÙŠŰ±Ű© ۏۯۧ و Ű„Ù„Ű§ لن ŰȘŰłŰȘŰ·ÙŠŰč ŰȘŰ«ŰšÙŠŰȘ ŰšŰ±Ű§Ù…ŰŹ ÙƒŰ§ÙÙŠŰ©. ۄ۰ۧ كنŰȘ ŰȘŰ±ÙŠŰŻ ŰȘŰźŰČين "
+"Ű§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ\n"
+"Űčلى ŰȘÙ‚ŰłÙŠÙ… Ù…ŰłŰȘقل ÙŰłŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ Űčمل ŰȘÙ‚ŰłÙŠÙ… لـ\"/home\"\n"
+"(ممكن ÙÙ‚Ű· ۄ۰ۧ ÙƒŰ§Ù† Ù„ŰŻÙŠÙƒ ŰŁÙƒŰ«Ű± من ŰȘÙ‚ŰłÙŠÙ… Ù„Ù„ÙŠÙ†ÙƒŰł).\n"
+"\n"
+"كل ŰȘÙ‚ŰłÙŠÙ… مُŰčŰ·Ù‰ ŰšŰ§Ù„ŰłÙƒÙ„ Ű§Ù„ŰȘŰ§Ù„ÙŠ: \"Ű§Ù„Ű„ŰłÙ…\", \"Ű§Ù„ŰłŰčŰ©\".\n"
+"\n"
+"\"Ű§Ù„Ű„ŰłÙ…\" Ù…Ű±ÙƒŰš ŰšŰ§Ù„ŰłÙƒÙ„ Ű§Ù„ŰȘŰ§Ù„ÙŠ: \"نوŰč Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš\", \"Ű±Ù‚Ù… Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš\",\n"
+"\"Ű±Ù‚Ù… Ű§Ù„ŰȘÙ‚ŰłÙŠÙ…\" (Ù…Ű«Ù„Ű§, \"hda1\").\n"
+"\n"
+"\"Ű±Ù‚Ù… Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš\" ŰŻŰ§ŰŠÙ…Ű§ هو Ű­Ű±Ù ŰšŰčŰŻ \"hd\" ŰŁÙˆ \"sd\". ŰšŰ§Ù„Ù†ŰłŰšŰ© Ù„Ù„ŰŁÙ‚Ű±Ű§Ű” "
+"Ű§Ù„Ű”Ù„ŰšŰ©\n"
+"من نوŰč IDE ÙŰ„Ù†:\n"
+" * \"a\" ŰȘŰčني \"Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš Ű§Ù„ŰŁŰłŰ§ŰłÙŠ Űčلى مŰȘŰ­ÙƒÙ… IDE Ű§Ù„ŰŁŰłŰ§ŰłÙŠ\",\n"
+"\n"
+" * \"b\" ŰȘŰčني \"Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš Ű§Ù„Ű«Ű§Ù†ÙˆÙŠ Űčلى مŰȘŰ­ÙƒÙ… IDE Ű§Ù„ŰŁŰłŰ§ŰłÙŠ\",\n"
+"\n"
+" * \"c\" ŰȘŰčني \"Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš Ű§Ù„ŰŁŰłŰ§ŰłÙŠ Űčلى مŰȘŰ­ÙƒÙ… IDE Ű§Ù„Ű«Ű§Ù†ÙˆÙŠ\",\n"
+"\n"
+" * \"d\" ŰȘŰčني \"Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš Ű§Ù„Ű«Ű§Ù†ÙˆÙŠ Űčلى مŰȘŰ­ÙƒÙ… IDE Ű§Ù„Ű«Ű§Ù†ÙˆÙŠ\",\n"
+"\n"
+"ŰŁÙ…Ű§ ŰšŰ§Ù„Ù†ŰłŰšŰ© Ù„ŰŁÙ‚Ű±Ű§Ű” ŰłÙƒŰČي SCSI ÙŰ§Ù„Ű­Ű±Ù \"a\" يŰčني \"ŰŁÙ‚Ù„ مŰčŰ±Ù SCSI\", و Ű§Ù„Ű­Ű±Ù \"b"
+"\"\n"
+"يŰčني \"Ű«Ű§Ù†ÙŠ ŰŁÙ‚Ù„ مŰčŰ±Ù SCSI\", Ű§Ù„Űź."
-#: ../../network/tools.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please fill or check the field below"
-msgstr "ÙŰ¶Ù„Ű§Ù‹ Ű§Ù…Ù„ŰŁ ŰŁÙˆ ŰŁŰŽÙ‘Ű± Űčلى Ű§Ù„Ű­Ù‚Ù„ ŰŁŰŻÙ†Ű§Ù‡"
+msgid "Tanzania"
+msgstr "ŰȘنŰČŰ§Ù†ÙŠŰ§"
-#: ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Connection Configuration"
-msgstr "ۧŰčۯۧۯۧŰȘ Ű§Ù„ÙˆŰ”Ù„Ű©"
+msgid "Computing FAT filesystem bounds"
+msgstr "ŰŹŰ§Ű±ÙŠ ۭ۳ۧۚ Ű±ÙˆŰ§ŰšŰ· Ù†ŰžŰ§Ù… Ù…Ù„ÙŰ§ŰȘ FAT"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+"\n"
+"Backup Sources: \n"
msgstr ""
-"Ù„Ű§ ÙŠŰšŰŻÙˆ ŰŁÙ† Ű§Ù„Ù†ŰžŰ§Ù… مŰȘŰ”Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ.\n"
-"Ű­Ű§ÙˆÙ„ ۧŰčۧۯ۩ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ÙˆŰ”Ù„Ű©."
+"\n"
+"Ù…Ű”Ű§ŰŻŰ± Ű§Ù„Ù…ŰłŰ§ŰčŰŻ :\n"
-#: ../../network/tools.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Ù„ŰŁŰłŰšŰ§Űš ŰŁÙ…Ù†ÙŠŰ©, ŰłÙŠŰȘم Ù‚Ű·Űč Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ Ű§Ù„ŰąÙ†."
+msgid "Content of the file"
+msgstr "Ù…Ű­ŰȘÙˆÙŠŰ§ŰȘ Ű§Ù„Ù…Ù„Ù"
-#: ../../network/tools.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Ű§Ù„Ù†ŰžŰ§Ù… Ű§Ù„ŰąÙ† مŰȘŰ”Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ"
+msgid "Authentication LDAP"
+msgstr "ŰȘŰ­Ù‚Ù‚ LDAP"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Testing your connection..."
-msgstr "ŰŹŰ§Ű±ÙŠ ۧ۟ŰȘۚۧ۱ Ű§Ù„ÙˆŰ”Ù„Ű©..."
+msgid "Let me pick any driver"
+msgstr "Ű§ŰłÙ…Ű­ لي ŰŁÙ† ŰŁŰźŰȘۧ۱ Ù…ŰŽŰșل"
-#: ../../network/tools.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "هل ŰȘŰ±ÙŠŰŻ ŰŁÙ† ŰȘŰ­Ű§ÙˆÙ„ ŰŁÙ† ŰȘŰȘŰ”Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ Ű§Ù„ŰąÙ†ŰŸ"
+msgid "Profile "
+msgstr "Ű§Ù„ŰȘŰŽÙƒÙŠÙ„:"
-#: ../../network/tools.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Internet configuration"
-msgstr "ۧŰčۯۧۯۧŰȘ Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ"
+msgid "transmitted"
+msgstr "Ù…ŰšŰčÙˆŰ«Ű©"
-#: ../../partition_table/raw.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
-msgstr ""
-"Ù‡Ù†Ű§Ùƒ ŰŽŰŠ ŰłÙŠŰŠ ÙŠŰ­Ű”Ù„ Ù„Ù„Ù‚Ű±Ű”. \n"
-"Ù„Ù‚ŰŻ ÙŰŽÙ„ ۧ۟ŰȘۚۧ۱ للŰȘŰŁÙƒŰŻ من ۔ۭ۩ Ű§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ. \n"
-"Ù‡Ű°Ű§ يŰčني ŰŁÙ† كŰȘۧۚ۩ ŰŁÙŠ ŰŽŰŠ Űčلى Ù‡Ű°Ű§ Ű§Ù„Ù‚Ű±Ű” ŰłÙŠÙ†ŰȘهي ŰšŰšÙŠŰ§Ù†Ű§ŰȘ ŰčŰŽÙˆŰ§ŰŠÙŠŰ© و ÙŰ§ŰłŰŻŰ©."
+msgid "Palestine"
+msgstr "ÙÙ„ŰłŰ·ÙŠÙ†"
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid " (Default)"
-msgstr " (Ű§ÙŰȘŰ±Ű§Ű¶ÙŠ)"
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
-#: ../../printer/cups.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Űčلى ŰźŰ§ŰŻÙ… CUPS \"%s\""
+msgid "%d comma separated strings"
+msgstr "%d Ű­Ű±ÙÙŠŰ§ŰȘ Ù…ÙŰ”ÙˆÙ„Ű© ŰšŰ§Ù„ÙŰ§Ű”Ù„Ű©"
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Remote Printers"
-msgstr "Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„ŰšŰčÙŠŰŻŰ©"
+msgid "Here is the full list of keyboards available"
+msgstr "Ù‡Ű§ هي Ù‚Ű§ŰŠÙ…Ű© ÙƒŰ§Ù…Ù„Ű© ŰšÙƒÙ„ Ù„ÙˆŰ­Ű§ŰȘ Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­ Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű©"
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "CUPS"
-msgstr "CUPS"
+msgid "Theme name"
+msgstr "Ű§ŰłÙ… Ű§Ù„ŰłÙ…Ű©"
-#: ../../printer/cups.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "(on this machine)"
-msgstr "(Űčلى Ù‡Ű°Ű§ Ű§Ù„ŰŹÙ‡Ű§ŰČ)"
+msgid "/_Help"
+msgstr "/_Ù…ŰłŰ§ŰčŰŻŰ©"
-#: ../../printer/cups.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "(on %s)"
-msgstr "(Űčلى %s)"
+msgid ""
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
+"Ù‡Ù†Ű§ يمكنك ۧ۟ŰȘÙŠŰ§Ű± ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ű§Ù„Ù…Ű§ŰłŰ­Ű§ŰȘ Ű§Ù„Ű¶ÙˆŰŠÙŠŰ© Ű§Ù„Ù…ŰȘŰ”Ù„Ű© ŰšÙ‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű© يمكن Ű§Ù„ÙˆŰ”ÙˆÙ„ "
+"Ű§Ù„ÙŠÙ‡Ű§ من Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű§ŰȘ Ű§Ù„ŰšŰčÙŠŰŻŰ© و Űčن Ű·Ű±ÙŠÙ‚ ŰŁÙŠ Ù…Ű§ÙƒÙŠÙ†Ű§ŰȘ ŰšŰčÙŠŰŻŰ©."
-#: ../../printer/data.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
+msgid "the width of the progress bar"
+msgstr "Űč۱۶ ŰŽŰ±ÙŠŰ· Ű§Ù„ŰȘÙ‚ŰŻÙ…"
-#: ../../printer/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LPRng"
-msgstr "LPRng"
+msgid "Cook Islands"
+msgstr "ŰŹŰČ۱ Ű§Ù„ÙƒÙˆÙƒ"
-#: ../../printer/data.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
+msgid "Formatting partition %s"
+msgstr "ŰŹŰ§Ű±ÙŠ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰȘŰŹŰČŰŠŰ© %s"
-#: ../../printer/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LPD"
-msgstr "LPD"
+msgid "Hostname required"
+msgstr "ÙŠÙŰ­ŰȘۧۏ Ű§Ù„Ù‰ Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ"
-#: ../../printer/data.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
+msgid "Unselect fonts installed"
+msgstr "Ű§Ű­Ű°Ù ۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„ŰźŰ·ÙˆŰ· Ű§Ù„Ù…Ű«ŰšŰȘŰ©"
-#: ../../printer/data.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "PDQ"
-msgstr "PDQ"
+msgid "Cancel"
+msgstr "Ű§Ù„Űșۧۥ"
-#: ../../printer/data.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
+msgid "Searching for configured scanners ..."
+msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰšŰ­Ű« Űčن Ù…Ű§ŰłŰ­Ű§ŰȘ Ű¶ÙˆŰŠÙŠŰ© مŰčŰŻÙ‘Ű©..."
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Unknown Model"
-msgstr "۷۱ۧŰČ ŰșÙŠŰ± مŰčŰ±ÙˆÙ"
+msgid "Wheel"
+msgstr "Wheel"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Unknown model"
-msgstr "۷۱ۧŰČ ŰșÙŠŰ± مŰčŰ±ÙˆÙ"
+msgid "Videocard"
+msgstr "ŰšŰ·Ű§Ù‚Ű© Ű§Ù„ÙÙŠŰŻÙŠÙˆ"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "%s (Port %s)"
-msgstr "%s (Ű§Ù„Ù…Ù†ÙŰ° %s)"
+msgid "\tBackups use tar and bzip2\n"
+msgstr "\tŰ§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠŰ© ŰȘŰłŰȘŰźŰŻÙ… tar و bzip2\n"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "Host %s"
-msgstr "Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ %s"
+msgid "Remove Selected"
+msgstr "Ű§Ű­Ű°Ù Ű§Ù„Ù…Ű§ŰŻŰ© Ű§Ù„Ù…ŰźŰȘۧ۱۩"
-#: ../../printer/main.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Network %s"
-msgstr "Ű§Ù„ŰŽŰšÙƒŰ© %s"
+msgid "/Autodetect _modems"
+msgstr "/ŰȘŰ­Ù‚Ù‚ ŰąÙ„ÙŠ من ŰŁ_ŰŹÙ‡ŰČŰ© Ű§Ù„Ù…ÙˆŰŻÙ…"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Interface \"%s\""
-msgstr "Ű§Ù„ÙˆŰ§ŰŹÙ‡Ű© \"%s\""
+msgid "Remove printer"
+msgstr "Ű§Ű­Ű°Ù Ű§Ù„Ű·Ű§ŰšŰčŰ©"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Local network(s)"
-msgstr "Ű§Ù„ŰŽŰšÙƒŰ©/Ű§Ù„ŰŽŰšÙƒŰ§ŰȘ Ű§Ù„Ù…Ű­Ù„ÙŠŰ©"
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
+msgstr ""
+"ŰȘŰ­Ű°ÙŠŰ±!\n"
+"\n"
+"DrakX ŰłÙŠÙ‚ÙˆÙ… Ű§Ù„ŰąÙ† ŰšŰȘŰșÙŠÙŠŰ± Ű­ŰŹÙ… ŰȘŰŹŰČŰŠŰ© Windows. كن Ű­Ű°Ű±Ű§Ù‹:\n"
+"Ù‡Ű°Ù‡ Ű§Ù„ŰčÙ…Ù„ÙŠŰ© ۟۷۱۩. ÙŰ„Ű°Ű§ لم ŰȘكن فŰčلŰȘ Ű°Ù„Ùƒ,\n"
+"ÙŠŰŹŰš Űčليك ŰŁÙˆÙ„Ű§Ù‹ Ű§Ù„ŰźŰ±ÙˆŰŹ من Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ, Ű«Ù… ŰŽŰșّل scandisk\n"
+"في Windows (و ۧ۟ŰȘÙŠŰ§Ű±ÙŠŰ§Ù‹ defrag), Ű«Ù… ŰŁŰčŰŻ\n"
+"Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ. ÙŠŰŹŰš Űčليك ÙƒŰ°Ù„Ùƒ Űčمل Ù†ŰłŰźŰ© ۭۧŰȘÙŠŰ§Ű·ÙŠŰ© من ŰšÙŠŰ§Ù†Ű§ŰȘك.\n"
+"ŰčÙ†ŰŻÙ…Ű§ ŰȘكون مŰȘŰŁÙƒŰŻŰ§Ù‹, Ű§Ù†Ù‚Ű± Ù…ÙˆŰ§ÙÙ‚."
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Raw printer (No driver)"
-msgstr "۷ۧۚŰčŰ© ŰźŰ§Ù… (Ù„Ű§ Ù…ŰŽŰșل)"
+msgid "Which services would you like to allow the Internet to connect to?"
+msgstr "ŰŁÙŠ ŰźŰŻÙ…Ű© ŰȘŰ±ÙŠŰŻ Ű§Ù„ŰłÙ…Ű§Ű­ Ù„Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ ŰŁÙ† ŰȘŰȘŰ”Ù„ ŰšÙ‡Ű§ŰŸ"
-#: ../../printer/main.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ", using command %s"
-msgstr ", ۚۧ۳ŰȘŰźŰŻŰ§Ù… Ű§Ù„ŰŁÙ…Ű± %s"
+msgid ""
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
+msgstr ""
+"ŰŁÙ‡Ù„Ű§ ŰšÙƒÙ… Ű§Ù„Ù‰ ۣۯۧ۩ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰšŰ±ÙŠŰŻ.\n"
+"\n"
+"Ù‡Ù†Ű§ ŰłÙŠÙ…ÙƒÙ†Ùƒ Ű„Űčۯۧۯ Ù†ŰžŰ§Ù… Ű§Ù„ŰȘÙ†ŰšÙŠÙ‡\n"
-#: ../../printer/main.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr " Űčلى ŰźŰ§ŰŻÙ… Novell \"%s\", Ű§Ù„Ű·Ű§ŰšŰčŰ© \"%s\""
+msgid "Other"
+msgstr "ŰŁŰźŰ±Ù‰"
-#: ../../printer/main.pm:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr "Űčلى ŰźŰ§ŰŻÙ… SMB/Windows \"%s\", Ű§Ù„Ù…ŰŽŰ§Ű±ÙƒŰ© \"%s\""
+msgid "Default"
+msgstr "Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠ"
-#: ../../printer/main.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", Ù…ŰłŰȘŰ¶ÙŠÙ TCP/IP \"%s\", Ű§Ù„Ù…Ù†ÙŰ° \"%s\""
+msgid "Button 2 Emulation"
+msgstr "Ù…Ű­Ű§ÙƒŰ§Ű© Ű§Ù„ŰČ۱ 2"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr "Űčلى ŰźŰ§ŰŻÙ… LPD \"%s\", Ű§Ù„Ű·Ű§ŰšŰčŰ© \"%s\""
+msgid "type1inst building"
+msgstr "ŰšÙ†Ű§ŰĄ type1inst"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ", printing to %s"
-msgstr ", ŰŹŰ§Ű±ÙŠ Ű§Ù„Ű·ŰšŰ§ŰčŰ© Ű§Ù„Ù‰ %s"
+msgid "Abiword"
+msgstr "Abiword"
-#: ../../printer/main.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ", multi-function device"
-msgstr ", ŰŹÙ‡Ű§ŰČ Ù…ŰȘŰčŰŻŰŻ Ű§Ù„ÙˆŰžŰ§ŰŠÙ"
+msgid "choose image file"
+msgstr "Ű„ŰźŰȘ۱ ملف Ű”ÙˆŰ±Ű©"
-#: ../../printer/main.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", ŰŹÙ‡Ű§ŰČ Ù…ŰȘŰčŰŻŰŻ Ű§Ù„ÙˆŰžŰ§ŰŠÙ Űčلى HP JetDirect"
+msgid "X server"
+msgstr "ŰźŰ§ŰŻÙ… X"
-#: ../../printer/main.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ", multi-function device on USB"
-msgstr ", ŰŹÙ‡Ű§ŰČ Ù…ŰȘŰčŰŻŰŻ Ű§Ù„ÙˆŰžŰ§ŰŠÙ Űčلى Ù…Ù†ÙŰ° USB"
+msgid "Domain Admin User Name"
+msgstr "Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… Ù„Ù…ŰŻÙŠŰ± Ű§Ù„Ù†Ű·Ű§Ù‚"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ", multi-function device on parallel port \\#%s"
-msgstr ", ŰŹÙ‡Ű§ŰČ Ù…ŰȘŰčŰŻŰŻ Ű§Ù„ÙˆŰžŰ§ŰŠÙ Űčلى Ű§Ù„Ù…Ù†ÙŰ° Ű§Ù„Ù…ŰȘÙˆŰ§ŰČي \\#%s"
+msgid "There was an error while scanning for TV channels"
+msgstr "ÙƒŰ§Ù† Ù‡Ù†Ű§Ùƒ ۟۷ۣ ŰŁŰ«Ù†Ű§ŰĄ ۶ۚ۷ Ù‚Ù†ÙˆŰ§ŰȘ Ű§Ù„ŰȘÙ„ÙŰ§ŰČ"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ", USB printer"
-msgstr ", ۷ۧۚŰčŰ© USB"
+msgid "US keyboard (international)"
+msgstr "Ù„ÙˆŰ­Ű© Ù…ÙŰ§ŰȘÙŠŰ­ ŰŁÙ…Ű±ÙŠÙƒÙŠŰ© (ŰŻÙˆÙ„ÙŠ)"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ", USB printer \\#%s"
-msgstr ", ۷ۧۚŰčŰ© USB \\#%s"
+msgid "Not installed"
+msgstr "ŰșÙŠŰ± Ù…Ű«ŰšÙ‘ŰȘ"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid " on parallel port \\#%s"
-msgstr " Űčلى Ű§Ù„Ù…Ù†ÙŰ° Ű§Ù„Ù…ŰȘÙˆŰ§ŰČي \\#%s"
+msgid "LAN connection"
+msgstr "ÙˆŰ”Ù„Ű© LAN"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Local Printers"
-msgstr "Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…Ű­Ù„ÙŠŰ©"
+msgid "/File/-"
+msgstr "/ملف/-"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Pipe job into a command"
-msgstr "Ű­ÙˆÙ‘Ù„ Ű§Ù„ÙˆŰžÙŠÙŰ© Ű§Ù„Ù‰ Ű§Ù„ŰŁÙ…Ű±"
+msgid "Italian"
+msgstr "Ű§Ù„Ű„ÙŠŰ·Ű§Ù„ÙŠŰ©"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
-msgid "Enter a printer device URI"
-msgstr "ŰŁŰŻŰźÙ„ URI Ű§Ù„ŰźŰ§Ű” ŰšŰ§Ù„Ű·Ű§ŰšŰčŰ©"
+msgid "Basic"
+msgstr "ŰŁŰłŰ§ŰłÙŠ"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Printer on NetWare server"
-msgstr "۷ۧۚŰčŰ© Űčلى ŰźŰ§ŰŻÙ… NetWare"
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
+msgstr ""
+"\n"
+" ŰŹÙ…ÙŠŰč Ű§Ù„Ű­Ù‚ÙˆÙ‚ Ù…Ű­ÙÙˆŰžŰ© (C) 2002 لـMandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "۷ۧۚŰčŰ© Űčلى ŰźŰ§ŰŻÙ… SMB/Windows 95/98/NT"
+msgid "Honduras"
+msgstr "Ù‡Ù†ŰŻÙˆŰ±Ű§Űł"
-#: ../../printer/main.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "۷ۧۚŰčŰ© ŰŽŰšÙƒŰ© (TCP/Socket)"
+msgid "pdq"
+msgstr ""
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Printer on remote lpd server"
-msgstr "۷ۧۚŰčŰ© Űčلى ŰźŰ§ŰŻÙ… lpd ŰšŰčÙŠŰŻ"
+msgid "Card IO"
+msgstr "Card IO"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "۷ۧۚŰčŰ© Űčلى ŰźŰ§ŰŻÙ… CUPS ŰšŰčÙŠŰŻ"
+msgid "when checked, owner and group won't be changed"
+msgstr "ŰčÙ†ŰŻ Ű§Ù„ŰȘŰŁŰŽÙŠŰ± لن يŰȘم ŰȘŰșÙŠÙŠŰ± Ű§Ù„Ù…Ű§Ù„Ùƒ و Ű§Ù„Ù…ŰŹÙ…ÙˆŰčŰ©"
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Remote printer"
-msgstr "۷ۧۚŰčŰ© ŰšŰčÙŠŰŻŰ©"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
+msgstr ""
+"\n"
+"ŰȘŰŹŰČŰŠŰ© Ű§Ù„Ű„Ù‚Ù„Ű§Űč\n"
+"Ù‡Ű°Ù‡ هي\n"
+"Ù„Ù„Ű„Ù‚Ù„Ű§Űč Ű§Ù„Ù…ŰČŰŻÙˆŰŹ في Ù†ŰžŰ§Ù…Ùƒ.\n"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Local printer"
-msgstr "۷ۧۚŰčŰ© Ù…Ű­Ù„ÙŠŰ©"
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
+msgstr ""
+"ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ لكل ŰźŰ·ÙˆŰ© ۧ۰ۧ كنŰȘ ŰłŰȘقوم ۚۄŰčۧۯŰȘÙ‡Ű§ ŰąÙ„ÙŠŰ§Ù‹ ŰŁÙ… ŰŁÙ†Ùƒ ŰȘŰ±ÙŠŰŻ ŰŁÙ† يكون Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ "
+"ŰšŰŽÙƒÙ„ ÙŠŰŻÙˆÙŠ."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Configuring applications..."
-msgstr "ŰŹŰ§Ű±ÙŠ Ű„Űčۯۧۯ Ű§Ù„ŰȘŰ·ŰšÙŠÙ‚Ű§ŰȘ..."
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
+msgstr ""
+"يمكنك ŰŁÙŠŰ¶Ű§Ù‹ ŰŁÙ† ŰȘÙ‚Ű±Ű± Ù‡Ù†Ű§ ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ű§Ù„Ù…Ű§ŰłŰ­Ű§ŰȘ Ű§Ù„Ű¶ÙˆŰŠÙŠŰ© Űčلى Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű§ŰȘ Ű§Ù„ŰšŰčÙŠŰŻŰ© ÙŠŰŹŰš "
+"ŰŁÙ† ŰȘكون مŰȘÙˆÙŰ±Ű© Ù„Ù‡Ű°Űč Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű©."
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
+msgid "\t-Network by FTP.\n"
+msgstr "\t-Ű§Ù„ŰŽŰšÙƒŰ© Űčن Ű·Ű±ÙŠÙ‚ FTP.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "ŰŹŰ§Ű±ÙŠ ۧŰČŰ§Ù„Ű© Ű§Ù„Ű·Ű§ŰšŰčŰ© \"%s\" ..."
+msgid "Russian (Yawerty)"
+msgstr "Ű§Ù„Ű±Ù‘ÙˆŰłÙŠŰ© (Yawerty)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "هل ŰȘŰ±ÙŠŰŻ فŰčÙ„Ű§Ù‹ Ű­Ű°Ù Ű§Ù„Ű·Ű§ŰšŰčŰ© \"%s\"۟"
+msgid "You must enter a device or file name!"
+msgstr "ÙŠŰŹŰš Űčليك Ű§ŰŻŰźŰ§Ù„ ŰŹÙ‡Ű§ŰČ ŰŁÙˆ Ű§ŰłÙ… ملف!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Remove printer"
-msgstr "Ű§Ű­Ű°Ù Ű§Ù„Ű·Ű§ŰšŰčŰ©"
+msgid "/_Quit"
+msgstr "/_ŰźŰ±ÙˆŰŹ"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Learn how to use this printer"
-msgstr "ŰȘŰčلم كيف ŰȘŰłŰȘŰźŰŻÙ… Ù‡Ű°Ù‡ Ű§Ù„Ű·Ű§ŰšŰčŰ©"
+msgid ""
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
+msgstr ""
+"ŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ alcatel microcode.\n"
+"قم ŰšŰȘنŰČÙŠÙ„Ù‡Ű§ Űčلى\n"
+"http://www.speedtouchdsl.com/dvreg_lx.htm\n"
+"و Ű§Ù†ŰłŰź Ű§Ù„Ù…Ù„Ù mgmt.o Ű§Ù„Ù‰ /usr/share/speedtouch"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Print test pages"
-msgstr "ۧ۷ۚŰč Ű”ÙŰ­Ű§ŰȘ ۧ۟ŰȘŰšŰ§Ű±ÙŠŰ©"
+msgid "Graphics memory: %s kB\n"
+msgstr "Ű°Ű§ÙƒŰ±Ű© ŰšŰ·Ű§Ù‚Ű© Ű§Ù„ŰŽŰ§ŰŽŰ©: %s ÙƒÙŠÙ„ÙˆŰšŰ§ÙŠŰȘ\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
-msgstr "ŰȘŰč۰۱ Ű­Ű°Ù Ű§Ù„Ű·Ű§ŰšŰčŰ© \"%s\" من Star Office/OpenOffice.org/GIMP."
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+msgstr ""
+" Ù‡Ű°Ű§ Ű§Ù„ŰšŰ±Ù†Ű§Ù…ŰŹ هو ŰšŰ±Ù†Ű§Ù…ŰŹ ۭ۱; يمكنك ۧŰčۧۯ۩ ŰȘوŰČيŰčŰ© و/ŰŁÙˆ ŰȘŰčŰŻÙŠÙ„Ù‡\n"
+" ŰȘŰ­ŰȘ ŰšÙ†ÙˆŰŻ ۱۟۔۩ GNU Ű§Ù„ŰčÙ…ÙˆÙ…ÙŠŰ© Ű§Ù„ŰŽŰ§Ù…Ù„Ű© (GPL) ÙƒÙ…Ű§ Ù†ÙŰŽÙŰ±ŰȘ Űčن Ű·Ű±ÙŠÙ‚\n"
+" ŰŹÙ…ŰčÙŠŰ© Ű§Ù„ŰšŰ±Ù…ŰŹÙŠŰ§ŰȘ Ű§Ù„Ű­Ű±Ű©; Ű„Ù…Ű§ ۧۄ۔ۯۧ۱ Ű§Ù„Ű«Ű§Ù†ÙŠ من Ű§Ù„ŰȘŰ±ŰźÙŠŰ” ŰŁÙˆ\n"
+" ŰŁÙŠ Ù†ŰłŰźŰ© ŰȘŰ§Ù„ÙŠŰ© (ۭ۳ۚ ۧ۟ŰȘÙŠŰ§Ű±Ùƒ).\n"
+"\n"
+" Ù‡Ű°Ű§ Ű§Ù„ŰšŰ±Ù†Ű§Ù…ŰŹ يُوŰČَّŰč Űčلى ŰŁÙ…Ù„ ŰŁÙ† يكون Ù…ÙÙŠŰŻŰ§,\n"
+" لكن ŰŻÙˆÙ† ŰŁÙŠ Ű¶Ù…Ű§Ù†â€™; Ű­ŰȘى ŰšŰŻÙˆÙ† Ű§Ù„Ű¶Ù…Ű§Ù†Ű© Ű§Ù„Ù…ÙÙ‡ÙˆÙ…Ű©\n"
+" Ù„Ù„Ű„ŰȘۏۧ۱ ŰŁÙˆ Ű§Ù„Ù…Ù†Ű§ŰłŰšŰ© لŰș۱۶ مŰčين. Ű§Ù†ŰžŰ±\n"
+" ۱۟۔۩ GNU Ű§Ù„ŰčÙ…ÙˆÙ…ÙŠŰ© Ű§Ù„ŰŽŰ§Ù…Ù„Ű© للŰȘÙŰ§Ű”ÙŠÙ„.\n"
+"\n"
+" ÙŠŰŹŰš ŰŁÙ† ŰȘكون Ù‚ŰŻ ŰȘŰłÙ„Ù…ŰȘ Ù†ŰłŰźŰ© من ŰȘŰ±ŰźÙŠŰ” GNU Ű§Ù„ŰčÙ…ÙˆÙ…ÙŠŰ© Ű§Ù„ŰŽŰ§Ù…Ù„Ű©\n"
+" مŰč Ű§Ù„ŰšŰ±Ù†Ű§Ù…ŰŹ; في Ű­Ű§Ù„Ű© ŰčŰŻÙ… ŰȘŰłÙ„Ù… Ű§Ù„Ű±ŰźŰ”Ű© Ű±Ű§ŰłÙ„ ŰŹÙ…ŰčÙŠŰ© Ű§Ù„ŰšŰ±Ù…ŰŹÙŠŰ§ŰȘ Ű§Ù„Ű­Ű±Ű© Űčلى Ű§Ù„ŰčÙ†ÙˆŰ§Ù† "
+"Ű§Ù„ŰȘŰ§Ù„ÙŠ\n"
+" Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA "
+"02111-1307,\n"
+" USA.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
-msgstr "ŰȘم Ű­Ű°Ù Ű§Ù„Ű·Ű§ŰšŰčŰ© \"%s\" من Star Office/OpenOffice.org/GIMP ŰšÙ†ŰŹŰ§Ű­."
+msgid "access to compilation tools"
+msgstr "Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ ŰŁŰŻÙˆŰ§ŰȘ Ű§Ù„ŰȘŰŹÙ…ÙŠŰč"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr "ŰŹŰ§Ű±ÙŠ Ű­Ű°Ù Ű§Ù„Ű·Ű§ŰšŰčŰ© من Star Office/OpenOffice.org/GIMP"
+msgid "Please select data to restore..."
+msgstr "۱ۏۧۥ ۧ۟ŰȘ۱ ŰȘŰ§Ű±ÙŠŰź Ű§Ù„Ű„ŰłŰȘŰčۧۯ۩..."
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Ű§Ű­Ű°Ù Ù‡Ű°Ù‡ Ű§Ù„Ű·Ű§ŰšŰčŰ© من Star Office/OpenOffice.org/GIMP"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
+msgstr ""
+"ۧ۰ۧ كنŰȘ ŰȘŰ±ÙŠŰŻ ۧ۳ŰȘŰźŰŻŰ§Ù… aboot, ÙÙ„Ű§ ŰȘÙ†ŰłÙ‰ ŰŁÙ† ŰȘŰȘŰ±Ùƒ Ù…ŰłŰ§Ű­Ű© ÙŰ§Ű±ŰșŰ© في\n"
+"ŰšŰŻŰ§ÙŠŰ© Ű§Ù„Ù‚Ű±Ű” (2048 Ù‚Ű·Ű§ŰčۧŰȘ ÙƒŰ§ÙÙŠŰ©)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr "ŰȘŰč۰۱ŰȘ Ű§Ű¶Ű§ÙŰ© Ű§Ù„Ű·Ű§ŰšŰčŰ© \"%s\" Ű§Ù„Ù‰ Star Office/OpenOffice.org/GIMP."
+msgid "Standard test page"
+msgstr "Ű”ÙŰ­Ű© ۧ۟ŰȘŰšŰ§Ű±ÙŠŰ© Ù‚ÙŠŰ§ŰłÙŠŰ©"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr "ŰȘمŰȘ Ű§Ű¶Ű§ÙŰ© Ű§Ù„Ű·Ű§ŰšŰčŰ© \"%s\" Ű§Ù„Ù‰ Star Office/OpenOffice.org/GIMP ŰšÙ†ŰŹŰ§Ű­."
+msgid "Create"
+msgstr "Ű§Ù†ŰŽŰ§ŰĄ ŰȘŰŹŰČŰŠŰ©"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ű¶Ű§ÙŰ© Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„Ù‰ Star Office/OpenOffice.org/GIMP"
+msgid "What"
+msgstr "Ù…Ű§Ű°Ű§ "
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr "ŰŁŰ¶Ù Ù‡Ű°Ù‡ Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„Ù‰ Star Office/OpenOffice.org/GIMP"
+msgid "There was an error ordering packages:"
+msgstr "ÙƒŰ§Ù† Ù‡Ù†Ű§Ùƒ ۟۷ۣ في ŰȘ۱ŰȘÙŠŰš Ű§Ù„Ű­ŰČم:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "ŰȘم ŰȘŰčيين Ű§Ù„Ű·Ű§ŰšŰčŰ© \"%s\" ÙƒŰ·Ű§ŰšŰčŰ© Ű§ÙŰȘŰ±Ű§Ű¶ÙŠŰ© Ű§Ù„ŰąÙ†."
+msgid "Bulgarian (BDS)"
+msgstr "Ű§Ù„ŰšÙ„ŰșŰ§Ű±ÙŠŰ© (BDS)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Default printer"
-msgstr "Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠŰ©"
+msgid "Disable Server"
+msgstr "ŰčŰ·Ù‘Ù„ Ű§Ù„ŰźŰ§ŰŻÙ…"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Set this printer as the default"
-msgstr "Űčيّن Ù‡Ű°Ù‡ Ű§Ù„Ű·Ű§ŰšŰčŰ© ÙƒŰ·Ű§ŰšŰčŰ© Ű§ÙŰȘŰ±Ű§Ű¶ÙŠŰ©"
+msgid "Filesystem encryption key"
+msgstr "مفŰȘۭۧ ŰȘŰŽÙÙŠŰ± Ù†ŰžŰ§Ù… Ű§Ù„Ù…Ù„ÙŰ§ŰȘ"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Printer options"
-msgstr "ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„Ű·Ű§ŰšŰčŰ©"
+msgid "Gujarati"
+msgstr "ŰșÙˆŰŹŰ§Ű±Ű§ŰȘي"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Printer manufacturer, model"
-msgstr "Ù…Ű”Ù†Ù‘Űč Ű§Ù„Ű·Ű§ŰšŰčŰ©, Ű§Ù„Ű·Ű±Ű§ŰČ"
+msgid ""
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
+msgstr ""
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "Ù…Ű”Ù†Ù‘Űč Ű§Ù„Ű·Ű§ŰšŰčŰ©, Ű§Ù„Ű·Ű±Ű§ŰČ, Ű§Ù„Ù…ŰŽŰșّل"
+msgid "Save theme"
+msgstr "Ű§Ű­ÙŰž Ű§Ù„ŰłÙ…Ű©"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "ŰŹŰ§Ű±ÙŠ ۧŰČŰ§Ù„Ű© Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„Ù‚ŰŻÙŠÙ…Ű© \"%s\" ..."
+msgid "group"
+msgstr "Ű§Ù„Ù…ŰŹÙ…ÙˆŰčŰ©"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer name, description, location"
-msgstr "Ű§ŰłÙ… Ű§Ù„Ű·Ű§ŰšŰčŰ©, ÙˆŰ”Ù, Ű§Ù„Ù…ÙƒŰ§Ù†"
+msgid "Brazil"
+msgstr "Ű§Ù„ŰšŰ±Ű§ŰČيل"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Printer connection type"
-msgstr "نوŰč ÙˆŰ”Ù„Ű© Ű§Ù„Ű·Ű§ŰšŰčŰ©"
+msgid "Auto Install"
+msgstr "ŰȘŰ«ŰšÙŠŰȘ ŰąÙ„ÙŠ"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "Raw printer"
-msgstr "۷ۧۚŰčŰ© ŰźŰ§Ù…"
+msgid "Network Configuration Wizard"
+msgstr "مŰčŰ§Ù„ŰŹ Ű„Űčۯۧۯ Ű§Ù„ŰŽŰšÙƒŰ©"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Do it!"
-msgstr "Ű§ÙŰčÙ„Ù‡Ű§!"
+msgid "Removable media automounting"
+msgstr "Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„ Ű§Ù„ŰąÙ„ÙŠ Ù„Ù„ÙˆŰłŰ§ŰŠŰ· Ű§Ù„Ù‚Ű§ŰšÙ„Ű© Ù„Ù„Ű„ŰČŰ§Ù„Ű©"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../services.pm:1
#, c-format
-msgid "Close"
-msgstr "Ű„ŰșÙ„Ű§Ù‚"
+msgid "Printing"
+msgstr "Ű§Ù„Ű·ŰšŰ§ŰčŰ©"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Unkown driver"
+msgstr "Ù…ŰŽŰșل ŰșÙŠŰ± مŰčŰ±ÙˆÙ"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Ű§Ù„Ű·Ű§ŰšŰčŰ© %s\n"
-"هل ŰȘŰ±ÙŠŰŻ ŰȘŰčŰŻÙŠÙ„ ŰȘلك Ű§Ù„Ű·Ű§ŰšŰčŰ©ŰŸ"
+"There are no printers found which are directly connected to your machine"
+msgstr "لم يŰȘم Ű§Ù„ŰčŰ«ÙˆŰ± Űčلى ۷ۧۚŰčۧŰȘ مŰȘŰ”Ù„Ű© Ù…ŰšŰ§ŰŽŰ±Ű©Ù‹ ŰšÙ‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű©"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Modify printer configuration"
-msgstr "ŰȘŰčŰŻÙŠÙ„ ۧŰčۯۧۯۧŰȘ Ű§Ù„Ű·Ű§ŰšŰčŰ©"
+msgid "Create a new partition"
+msgstr "Ű§Ù†ŰŽŰŠ ŰȘŰŹŰČŰŠŰ© ŰŹŰŻÙŠŰŻŰ©"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Add a new printer"
-msgstr "ŰŁŰ¶Ù ۷ۧۚŰčŰ© ŰŹŰŻÙŠŰŻŰ©"
+msgid "Driver:"
+msgstr "Ű§Ù„Ù…ŰŽŰșل:"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+# ../../standalone/harddrake2:1, c-format
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Normal Mode"
-msgstr "ÙˆŰ¶Űč ŰčŰ§ŰŻÙŠ"
+msgid "unknown"
+msgstr "ŰșÙŠŰ± مŰčŰ±ÙˆÙ"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Change the printing system"
-msgstr "ŰȘŰșÙŠÙŠŰ± Ù†ŰžŰ§Ù… Ű§Ù„Ű·ŰšŰ§ŰčŰ©"
+msgid "Use fdisk"
+msgstr "ۧ۳ŰȘŰźŰŻÙ… fdisk"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "CUPS configuration"
-msgstr "CUPS ŰȘÙ‡ÙŠŰŠŰ©"
+msgid "MOVE YOUR WHEEL!"
+msgstr "Ű­Ű±Ùƒ ŰčŰŹÙ„Ű© Ű§Ù„ÙŰŁŰ±Ű©!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr "ŰŁŰčŰŻ ŰȘŰ­Ù…ÙŠÙ„ Ù‚Ű§ŰŠÙ…Ű© Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ (لŰč۱۶ كل ۷ۧۚŰčۧŰȘ CUPS Ű§Ù„ŰšŰčÙŠŰŻŰ© Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű©)"
+msgid "sent: "
+msgstr "Ù…ÙŰ±ŰłÙ„: "
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr "ۧŰč۱۶ كل ۷ۧۚŰčۧŰȘ CUPS Ű§Ù„ŰšŰčÙŠŰŻŰ© Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű©"
+msgid "Automatic IP"
+msgstr "Automatic IP"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+" Note that two different options are available after clicking the button:\n"
+"\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
msgstr ""
-"ŰȘمŰȘ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„ŰąŰȘÙŠŰ©. Ű§Ù†Ù‚Ű± Ù†Ù‚Ű±Ű© مŰČŰŻÙˆŰŹŰ© Űčلى Ű§Ù„Ű·Ű§ŰšŰčŰ© لŰȘŰșÙŠÙŠŰ± ۧŰčۯۧۯۧŰȘÙ‡Ű§ "
-"Ù„ŰŹŰčÙ„Ù‡Ű§ ۷ۧۚŰčŰ© Ű§ÙŰȘŰ±Ű§Ű¶ÙŠŰ© ŰŁÙˆ Ù„Ű±Ű€ÙŠŰ© مŰčÙ„ÙˆÙ…Ű§ŰȘ Ű­ÙˆÙ„Ù‡Ű§."
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Printing system: "
-msgstr "Ù†ŰžŰ§Ù… Ű§Ù„Ű·ŰšŰ§ŰčŰ©: "
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Checking installed software..."
-msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰȘŰŁÙƒŰŻ من Ű§Ù„ŰšŰ±Ű§Ù…ŰŹ Ű§Ù„Ù…Ű«ŰšÙ‘ŰȘŰ©..."
+msgid "Configuration of a remote printer"
+msgstr "ŰȘÙ‡ÙŠŰŠŰ© ۷ۧۚŰčŰ© ŰšŰčÙŠŰŻŰ©"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installing Foomatic..."
-msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰ«ŰšÙŠŰȘ Foomatic..."
+msgid "Moldova"
+msgstr "Ù…ÙˆÙ„ŰŻÙˆÙŰ§"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "ŰȘŰč۰۱ŰȘ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Ű·Ű§ŰšŰčŰ© \"%s\"!"
+msgid "Please check if you want to erase your tape before the backup."
+msgstr "ÙŰ¶Ù„Ű§ قم ŰšŰ§Ù„ŰȘŰŁŰŽÙŠŰ± Ù‡Ù†Ű§ ۧ۰ۧ كنŰȘ ŰȘŰ±ÙŠŰŻ Ù…ŰłŰ­ Ű§Ù„ŰŽŰ±ÙŠŰ· Ù‚ŰšÙ„ Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ."
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "ŰŹŰ§Ű±ÙŠ Ű„Űčۯۧۯ Ű§Ù„Ű·Ű§ŰšŰčŰ© \"%s\" ..."
+msgid "An online platform to respond to enterprise support needs."
+msgstr "ŰšÙŠŰŠŰ© Űčلى Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ Ù„Ù„Ű„ŰłŰȘۏۧۚ۩ Ù„Ű§Ű­ŰȘÙŠŰ§ŰŹŰ§ŰȘ Ű§Ù„ŰŻŰčم Ű§Ù„ÙÙ†ÙŠ Ù„Ù„ŰŽŰ±ÙƒŰ§ŰȘ"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Reading printer data..."
-msgstr "ŰŹŰ§Ű±ÙŠ Ù‚Ű±Ű§ŰĄŰ© ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„Ű·Ű§ŰšŰčŰ©..."
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "ÙŠŰŹŰš ŰŁÙ† ÙŠŰšŰŻŰŁ Ű§Ù„ŰčÙ†ÙˆŰ§Ù† ŰšÙ€ 'ftp:' ŰŁÙˆ 'http:'"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "ŰŁÙŠ Ù†ŰžŰ§Ù… ۷ۚۧŰčŰ© ŰȘŰ±ÙŠŰŻ ŰŁÙ† ŰȘŰłŰȘŰźŰŻÙ…ŰŸ"
+msgid "Add a new rule at the end"
+msgstr "ŰŁŰ¶Ù Ù‚Ű§ŰčŰŻŰ© ŰŹŰŻÙŠŰŻŰ© في Ű§Ù„Ù†Ù‡Ű§ÙŠŰ©"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select Printer Spooler"
-msgstr "ۧ۟ŰȘ۱ Printer Spooler"
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
+msgstr ""
+"يمكنك ÙƒŰ°Ù„Ùƒ ŰŁÙ† ŰȘÙ‚Ű±Ű± Ù‡Ù†Ű§ ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…ÙˆŰŹÙˆŰŻŰ© Űčلى Ű§Ù„ŰŁŰŹÙ‡ŰČŰ© Ű§Ù„ŰšŰčÙŠŰŻŰ© ŰŁÙ† "
+"ŰȘكون مŰȘÙˆÙŰ±Ű© ŰąÙ„ÙŠŰ§Ù‹ Ù„Ù‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű©."
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Setting Default Printer..."
-msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰčيين Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠŰ©..."
+msgid ""
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
+msgstr ""
+"يمكنك Ű§Ù„ŰąÙ† ۧŰč۷ۧۥ Ű§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ Ù„Ù„ÙˆŰ­ŰŻŰ© %s.\n"
+"Ű§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ في Ù‡ÙŠŰŠŰ© ``name=value name2=value2 ...'' \n"
+"Ù…Ű«Ù„Ű§, ``io=0x300 irq=7''"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Installing %s ..."
-msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰ«ŰšÙŠŰȘ %s ..."
+msgid "Quit without writing the partition table?"
+msgstr "هل ŰȘŰ±ÙŠŰŻ Ű§Ù„ŰźŰ±ÙˆŰŹ ŰšŰŻÙˆÙ† كŰȘۧۚ۩ ŰŹŰŻÙˆÙ„ Ű§Ù„ŰȘÙ‚ŰłÙŠÙ…ŰŸ"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Removing %s ..."
-msgstr "ŰŹŰ§Ű±ÙŠ Ű­Ű°Ù %s ..."
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Ù†ŰžŰ§Ù… Ű§Ù„Ű·ŰšŰ§ŰčŰ© (%s) لن يŰȘم ŰšŰŻŰ€Ù‡ ŰšŰŽÙƒÙ„ ŰąÙ„ÙŠ ŰčÙ†ŰŻ ۚۯۥ ŰȘŰŽŰșيل Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű©.\n"
-"\n"
-"من Ű§Ù„Ù…Ù…ÙƒÙ† ŰŁÙ† يكون Ù‚ŰŻ ŰȘم ŰȘŰčŰ·ÙŠÙ„ Ű§Ù„ŰšŰŻŰĄ Ű§Ù„ŰąÙ„ÙŠ ۚ۳ۚۚ Ű§Ù„ŰȘŰșÙŠÙŠŰ± Ű§Ù„Ù‰ Ù…ŰłŰȘوى ŰŁŰčلى Ù„ŰŁÙ† "
-"Ù†ŰžŰ§Ù… Ű§Ù„Ű·ŰšŰ§ŰčŰ© Ù‚ŰŻ يكون Ù†Ù‚Ű·Ű© Ù…ŰšŰŻŰŠÙŠŰ© Ù„Ù‡ŰŹÙ…Ű§ŰȘ Ű§Ù„Ù…ŰźŰȘŰ±Ù‚ÙŠÙ†.\n"
-"\n"
-"هل ŰȘŰ±ÙŠŰŻ ŰȘمكين Ű§Ù„ŰšŰŻŰĄ Ű§Ù„ŰąÙ„ÙŠ Ù„Ù†ŰžŰ§Ù… Ű§Ù„Ű·ŰšŰ§ŰčŰ© ŰčÙ†ŰŻ ۚۯۥ Ű§Ù„ŰȘŰŽŰșيل Ù…Ű±Ű© ŰŁŰźŰ±Ù‰ŰŸ"
+msgid "Installing packages..."
+msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰ±ÙƒÙŠŰš Ű§Ù„ŰŹŰČم..."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "ۚۯۥ Ù†ŰžŰ§Ù… Ű§Ù„Ű·ŰšŰ§ŰčŰ© ŰčÙ†ŰŻ Ű§Ù„Ű„Ù‚Ù„Ű§Űč"
+msgid "Dutch"
+msgstr "Ű§Ù„Ù‡ÙˆÙ„Ù†ŰŻÙŠŰ©"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"ŰŁÙ†ŰȘ Űčلى ÙˆŰŽÙƒ ŰȘŰ«ŰšÙŠŰȘ Ù†ŰžŰ§Ù… Ű§Ù„Ű·ŰšŰ§ŰčŰ© %s Űčلى Ù†ŰžŰ§Ù… يŰčمل Űčلى Ű§Ù„Ù…ŰłŰȘوى Ű§Ù„ŰŁÙ…Ù†ÙŠ %s.\n"
-"Ù†ŰžŰ§Ù… Ű§Ù„Ű·ŰšŰ§ŰčŰ© ÙŠŰŽŰșّل Ù…Ű±Ű§Ù‚Űš (ŰčÙ…Ù„ÙŠŰ© ŰźÙ„ÙÙŠŰ©) يقوم ŰšŰ§Ù†ŰȘ۞ۧ۱ ÙˆŰžŰ§ŰŠÙ Ű§Ù„Ű·ŰšŰ§ŰčŰ© و يŰȘŰčŰ§Ù…Ù„ "
-"مŰčÙ‡Ű§. Ù‡Ű°Ű§ Ű§Ù„Ù…Ű±Ű§Ù‚Űš يمكن Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„ÙŠÙ‡ Űčن من Ù‚ÙŰšÙ„ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű§ŰȘ Ű§Ù„ŰšŰčÙŠŰŻŰ© Űčلى Ű§Ù„ŰŽŰšÙƒŰ© و "
-"Ù„Ű°Ű§ ÙÙ‚ŰŻ يمكن ŰŁÙ† يكون Ù†Ù‚Ű·Ű© Ù…ŰšŰŻŰŠÙŠŰ© Ù„Ù‡ŰŹÙ…Ű§ŰȘ Ű§Ù„Ù…ŰźŰȘŰ±Ù‚ÙŠÙ†. Ù„Ù‡Ű°Ű§ يŰȘم ۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„Ù‚Ù„ÙŠÙ„ من "
-"Ű§Ù„Ù…Ű±Ű§Ù‚ŰšŰ§ŰȘ لŰȘŰŽŰșÙŠÙ„Ù‡Ű§ Ű§ÙŰȘŰ±Ű§Ű¶ÙŠŰ§Ù‹ Űčلى Ù‡Ű°Ű§ Ű§Ù„Ù…ŰłŰȘوى Ű§Ù„ŰŁÙ…Ù†ÙŠ.\n"
-"\n"
-"هل ŰȘŰ±ÙŠŰŻ فŰčÙ„Ű§Ù‹ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Ű·ŰšŰ§ŰčŰ© Űčلى Ù‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű©ŰŸ"
+msgid "The following packages need to be installed:\n"
+msgstr "ÙŠŰŹŰš ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ű­ŰČم Ű§Ù„ŰȘŰ§Ù„ÙŠŰ©:\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰ«ŰšÙŠŰȘ Ù†ŰžŰ§Ù… ۷ۚۧŰčŰ© في Ù…ŰłŰȘوى Ű§Ù„ŰŁÙ…Ù† %s"
+msgid "Angola"
+msgstr "ŰŁÙ†ŰșÙˆÙ„Ű§"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "paranoid"
-msgstr "Ù…Ű±ŰȘفŰč ŰšŰŹÙ†ÙˆÙ†"
+msgid "service setting"
+msgstr "Ű„ŰčۯۧۯۧŰȘ Ű§Ù„ŰźŰŻÙ…Ű§ŰȘ"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "high"
-msgstr "Ù…Ű±ŰȘفŰč"
+msgid "Custom"
+msgstr "Ù…ŰźŰ”Ű”"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Restarting printing system..."
-msgstr "ŰŹŰ§Ű±ÙŠ ۧŰčۧۯ۩ ŰȘŰŽŰșيل Ù†ŰžŰ§Ù… Ű§Ù„Ű·ŰšŰ§ŰčŰ©..."
+msgid "File is already used by another loopback, choose another one"
+msgstr "Ù‡Ű°Ű§ Ű§Ù„Ù…Ù„Ù Ù…ŰłŰȘŰźŰŻÙ… من loopback ŰŁŰźŰ±Ù‰, ۧ۟ŰȘ۱ Ù…Ù„ÙŰ§ ۹۟۱"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configuration of a remote printer"
-msgstr "ŰȘÙ‡ÙŠŰŠŰ© ۷ۧۚŰčŰ© ŰšŰčÙŠŰŻŰ©"
+msgid "Read-only"
+msgstr "Ù„Ù„Ù‚Ű±Ű§ŰĄŰ© ÙÙ‚Ű·"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Latvia"
+msgstr "Ù„Ű§ŰȘÙÙŠŰ§"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "No known driver"
+msgstr "Ù„Ű§ ÙŠÙˆŰŹŰŻ Ù…ŰŽŰșل مŰčŰ±ÙˆÙ"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "1 MB"
+msgstr "1 ميŰșŰ§ŰšŰ§ÙŠŰȘ"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
msgstr ""
-"Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ Ű§Ù„ŰŽŰšÙƒŰ© Ù„Ű§ يŰčمل و لم يمكن ŰšŰŻŰ€Ù‡. ÙŰ¶Ù„Ű§Ù‹ ŰȘŰŁÙƒŰŻ من Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ© Ù„ŰŻÙŠÙƒ و Ű§Ù„ŰčŰȘۧۯ "
-"Ű§Ù„ŰźŰ§Ű” ŰšÙƒ. Ű«Ù… Ű­Ű§ÙˆÙ„ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„ŰšŰčÙŠŰŻŰ© Ù…Ű±Ű© ŰŁŰźŰ±Ù‰."
+"ۧ۰ۧ لم ŰȘكن Ù‡Ű°Ù‡ هي Ű§Ù„ŰȘي ŰȘŰ±ÙŠŰŻ ŰȘÙ‡ÙŠŰŠŰȘÙ‡Ű§, ŰŁŰŻŰźÙ„ Ű§ŰłÙ… ŰŹÙ‡Ű§ŰČ/Ű§ŰłÙ… ملف في Ű­Ù‚Ù„ Ű§Ù„Ű„ŰŻŰźŰ§Ù„"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksound:1
#, c-format
msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-"Ù„Ű§ يمكن ۚۯۥ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„ŰȘي ŰȘم ŰčÙ…Ù„Ù‡Ű§ ŰŁŰ«Ù†Ű§ŰĄ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„ŰąÙ†. ÙŰ¶Ù„Ű§Ù‹ ŰȘŰŁÙƒŰŻ ۧ۰ۧ ÙƒŰ§Ù† "
-"يمكن Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ Ű§Ù„ŰŽŰšÙƒŰ© ŰšŰčŰŻ Ű§Ù‚Ù„Ű§Űč Ű§Ù„Ù†ŰžŰ§Ù… و Ű”Ű­Ù‘Ű­ Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ© ۚۧ۳ŰȘŰźŰŻŰ§Ù… Ù…Ű±ÙƒŰČ ŰȘŰ­ÙƒÙ… "
-"Mandrake في Ù‚ŰłÙ… \"Ű§Ù„ŰŽŰšÙƒŰ© و Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ\"/\"Ű§Ù„ÙˆŰ”Ù„Ű§ŰȘ\", و ŰšŰčŰŻ Ű°Ù„Ùƒ قم ŰšŰȘÙ‡ÙŠŰŠŰ© "
-"Ű§Ù„Ű·Ű§ŰšŰčŰ©, ÙƒŰ°Ù„Ùƒ ۚۧ۳ŰȘŰźŰŻŰ§Ù… Ù…Ű±ÙƒŰČ ŰȘŰ­ÙƒÙ… Mandrake في Ù‚ŰłÙ… \"Ű§Ù„ŰčŰȘۧۯ\"/\"Ű§Ù„Ű·Ű§ŰšŰčŰ©\""
+"ŰȘŰč۰۱ Ű§ÙŠŰŹŰ§ŰŻ ŰšŰ·Ű§Ù‚Ű© Ű”ÙˆŰȘ Űčلى ŰŹÙ‡Ű§ŰČك. ÙŰ¶Ù„Ű§Ù‹ ŰȘŰŁÙƒŰŻ من ŰŁÙ† ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű”ÙˆŰȘ Ű§Ù„Ù…ŰŻŰčÙˆÙ…Ű© من "
+"Ù„ÙŠÙ†ÙƒŰł Ù…ÙˆŰ”ÙˆÙ„Ű© ŰšŰŽÙƒÙ„ Ű”Ű­ÙŠŰ­.\n"
+"\n"
+"\n"
+"يمكنك ŰČÙŠŰ§Ű±Ű© Ù‚Ű§ŰčŰŻŰ© ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„ŰčŰȘۧۯ Ű§Ù„Ù…ŰŻŰčوم Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙ†Ű§ Űčلى:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Configure the network now"
-msgstr "قم ŰšŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰŽŰšÙƒŰ©"
+msgid "Configure Local Area Network..."
+msgstr "Ű„Űčۯۧۯ Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ©..."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Go on without configuring the network"
-msgstr "ŰȘۧۚŰč ŰŻÙˆÙ† ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰŽŰšÙƒŰ©"
+msgid "Launch the sound system on your machine"
+msgstr "ÙŠŰŽŰșل Ù†ŰžŰ§Ù… Ű§Ù„Ű”ÙˆŰȘ Űčلى ŰŹÙ‡Ű§ŰČك"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"ŰŁÙ†ŰȘ Űčلى ÙˆŰŽÙƒ ŰȘÙ‡ÙŠŰŠŰ© ۷ۧۚŰčŰ© ŰšŰčÙŠŰŻŰ©. Ù‡Ű°Ű§ ÙŠŰ­ŰȘۧۏ Ű§Ù„Ù‰ ŰŁÙ† ŰȘكون ÙˆŰ”Ù„Ű© Ű§Ù„ŰŽŰšÙƒŰ© ŰȘŰčمل و لكن "
-"Ű§Ù„ŰŽŰšÙƒŰ© لم يŰȘم ۧŰčŰŻŰ§ŰŻÙ‡Ű§ Ű­ŰȘى Ű§Ù„ŰąÙ†. ۧ۰ۧ كنŰȘ ŰȘŰ±ÙŠŰŻ Ű§Ù„Ù…ŰȘۧۚŰčŰ© ŰŻÙˆÙ† ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰŽŰšÙƒŰ©, "
-"ŰłŰȘكون Ù‚Ű§ŰŻŰ±Ű§Ù‹ Űčلى ۧ۳ŰȘŰźŰŻŰ§Ù… Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„ŰȘي ŰȘÙ‚Ű©Ù… ŰšŰȘÙ‡ÙŠŰŠŰȘÙ‡Ű§ Ű§Ù„ŰąÙ†. كيف ŰȘŰ±ÙŠŰŻ Ű§Ù„Ù…ŰȘۧۚŰčŰ©ŰŸ"
+msgid "Preparing printer database..."
+msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰ­Ű¶ÙŠŰ± Ù‚Ű§ŰčŰŻŰ© ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Network functionality not configured"
-msgstr "لم يŰȘم ŰȘŰ­ŰŻÙŠŰŻ ÙˆŰžÙŠÙÙŠŰ© Ű§Ù„ŰŽŰšÙƒŰ©"
+msgid "Information"
+msgstr "مŰčÙ„ÙˆÙ…Ű§ŰȘ"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Starting network..."
-msgstr "ŰŹŰ§Ű±ÙŠ ۚۯۥ Ű§Ù„ŰŽŰšÙƒŰ©..."
+msgid "No network card"
+msgstr "Ù„Ű§ ŰȘÙˆŰŹŰŻ ŰšŰ·Ű§Ù‚Ű© ŰŽŰšÙƒŰ©"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, c-format
-msgid "Refreshing printer data..."
-msgstr "ŰŹŰ§Ű±ÙŠ ۧŰčۧۯ۩ ŰȘŰ­Ù…ÙŠÙ„ ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„Ű·Ű§ŰšŰ©..."
+msgid "Which filesystem do you want?"
+msgstr "ŰŁÙŠ Ù†ŰžŰ§Ù… Ù…Ù„ÙŰ§ŰȘ ŰȘŰ±ÙŠŰŻŰŸ"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "3 buttons"
+msgstr "3 ŰŁŰČ۱ۧ۱"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Detailed information"
+msgstr "مŰčÙ„ÙˆÙ…Ű§ŰȘ Ù…ÙŰ”Ù‘Ù„Ű©"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Malta"
+msgstr "Ù…Ű§Ù„Ű·Ű©"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
+"Printer default settings\n"
+"\n"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
msgstr ""
-"Ù„Ù‚ŰŻ قمŰȘ ŰšÙ†Ù‚Ù„ Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠŰ© Ű§Ù„ŰłŰ§ŰšÙ‚Ű© (\"%s\"), هل ÙŠŰŹŰš ŰŁÙŠŰ¶Ű§Ù‹ ŰŁÙ† ŰȘكون "
-"Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠŰ© ŰȘŰ­ŰȘ Ù†ŰžŰ§Ù… Ű§Ù„Ű·ŰšŰ§ŰčŰ© Ű§Ù„ŰŹŰŻÙŠŰŻ %s۟"
+"ۧŰčۯۧۯۧŰȘ Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠŰ©\n"
+"\n"
+"ÙŠŰŹŰš Űčليك Ű§Ù„ŰȘŰŁÙƒŰŻ ۧ۰ۧ ÙƒŰ§Ù† Ű­ŰŹÙ… Ű§Ù„Ű”ÙŰ­Ű© و نوŰč Ű§Ù„Ű­ŰšŰ±/ÙˆŰ¶Űč Ű§Ù„Ű·ŰšŰ§ŰčŰ© (Ű§Ù† ÙˆŰŹŰŻ) ŰšŰ§Ù„Ű„Ű¶Ű§ÙŰ© "
+"Ű§Ù„Ù‰ ۧŰčۯۧۯۧŰȘ Ű§Ù„ŰčŰȘۧۯ Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù„ÙŠŰČ۱ (Ű§Ù„Ű°Ű§ÙƒŰ±Ű©, ÙˆŰ­ŰŻŰ§ŰȘ Ű§Ù„ŰŻÙˆŰšÙ„ÙƒŰł, Ű§Ù„Ù…Ù†Ű”Ű§ŰȘ "
+"Ű§Ù„Ű„Ű¶Ű§ÙÙŠŰ©) مŰčŰŻÙ‘Ű© ŰšŰŽÙƒÙ„ Ű”Ű­ÙŠŰ­. Ù„Ű§Ű­Űž ŰŁÙ† ŰŹÙˆŰŻŰ© ۷ۚۧŰčŰ© ŰčŰ§Ù„ÙŠŰ© ŰŹŰŻŰ§Ù‹ Ù‚ŰŻ ŰȘŰŹÙ‡Ù„ Ű§Ù„Ű·ŰšŰ§ŰčŰ© ŰšŰ·ÙŠŰŠŰ©."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Transfer printer configuration"
-msgstr "نقل Ű„ŰčۯۧۯۧŰȘ Ű§Ù„Ű·Ű§ŰšŰčŰ©"
+msgid "This floppy is not FAT formatted"
+msgstr "Ù‡Ű°Ű§ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…Ű±Ù† ŰșÙŠŰ± Ù…ŰŹÙ‡ŰČ Űčلى Ù†ŰžŰ§Ù… Ù…Ù„ÙŰ§ŰȘ FAT"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Transferring %s..."
-msgstr "ŰŹŰ§Ű±ÙŠ نقل %s..."
+msgid "Configuring network"
+msgstr "ŰŹŰ§Ű±ÙŠ ۧŰčۯۧۯ Ű§Ù„ŰŽŰšÙƒŰ©"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid "New printer name"
-msgstr "Ű§ŰłÙ… Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„ŰŹŰŻÙŠŰŻŰ©"
+msgid "Graphic Card"
+msgstr "ŰšŰ·Ű§Ù‚Ű© Ű§Ù„ŰŽŰ§ŰŽŰ©"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Ű§Ù„Ű·Ű§ŰšŰčŰ© \"%s\" Ù…ÙˆŰŹÙˆŰŻŰ© Ù…ŰłŰšÙ‚Ű§Ù‹,\n"
-"هل ŰȘŰ±ÙŠŰŻ فŰčÙ„Ű§Ù‹ Ű§Ù„ÙƒŰȘۧۚ۩ فوق Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙ‡Ű§ŰŸ"
+msgid "Resizing Windows partition"
+msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰșÙŠÙŠŰ± Ű­ŰŹÙ… ŰȘŰŹŰČŰŠŰ© Windows"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Ű§ŰłÙ… Ű§Ù„Ű·Ű§ŰšŰčŰ© ÙŠŰŹŰš ŰŁÙ† ÙŠŰ­ŰȘوي ÙÙ‚Ű· Űčلى Ű­Ű±ÙˆÙ و ŰŁŰ±Ù‚Ű§Ù… و ێۧ۱۷ۧŰȘ ŰȘŰ­ŰȘÙŠŰ©"
+msgid "Provider dns 1 (optional)"
+msgstr "DNS Ű§Ù„ŰŁÙˆÙ„ Ù„Ù„Ù…ÙˆÙŰ± (ۧ۟ŰȘÙŠŰ§Ű±ÙŠ)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Transfer"
-msgstr "Ű§Ù†Ù‚Ù„"
+msgid "Cameroon"
+msgstr "Ű§Ù„ÙƒŰ§Ù…ÙŠŰ±ÙˆÙ†"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
msgstr ""
-"Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„Ù…ŰłÙ…Ű§Ű© \"%s\" Ù…ÙˆŰŹÙˆŰŻŰ© Ù…ŰłŰšÙ‚Ű§ ŰȘŰ­ŰȘ %s. \n"
-"Ű§Ù†Ù‚Ű± \"Ű§Ù†Ù‚Ù„\" للكŰȘۧۚ۩ فوقه.\n"
-"يمكنك ÙƒŰ°Ù„Ùƒ كŰȘۧۚ۩ Ű§ŰłÙ… ŰŹŰŻÙŠŰŻ ŰŁÙˆ ŰȘŰ­Ű·ÙŠ Ù‡Ű°Ù‡ Ű§Ù„Ű·Ű§ŰšŰčŰ©."
+"يمكنك Ű§Ù„ŰąÙ† ŰȘŰŹŰČŰŠŰ© %s.\n"
+"ŰčÙ†ŰŻÙ…Ű§ ŰȘنŰȘهي Ù„Ű§ ŰȘÙ†ŰłÙ‰ Ű§Ù„Ű­ÙŰž ۚۧ۳ŰȘŰźŰŻŰ§Ù… `w'"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Do not transfer printers"
-msgstr "Ù„Ű§ ŰȘنقل Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ"
+msgid "Close"
+msgstr "Ű„ŰșÙ„Ű§Ù‚"
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
msgstr ""
-"\n"
-"Űčلّم Űčلى Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„ŰȘي ŰȘŰ±ÙŠŰŻ Ù†Ù‚Ù„Ù‡Ű§ Ű«Ù… Ű§Ù†Ù‚Ű± \n"
-"\"Ű§Ù†Ù‚Ù„\"."
+"\"%s\": ŰȘŰŁÙƒŰŻ من ۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„ŰšÙ„ŰŻ Ű§Ù„Ű­Ű§Ù„ÙŠ. ۧ۰ۧ لم ŰȘكن في Ù‡Ű°Ű§\n"
+"Ű§Ù„ŰšÙ„ŰŻ, ۧ۶ŰșŰ· Űčلى ŰČ۱ \"%s\" و ۧ۟ŰȘ۱ ŰšÙ„ŰŻŰ§Ù‹ ۹۟۱. ۧ۰ۧ لك ŰȘكن\n"
+"ŰšÙ„ŰŻÙƒ في Ű§Ù„Ù‚Ű§ŰŠÙ…Ű© ۧ۶ŰșŰ· ŰČ۱ \"Ű§Ù„Ù…ŰČÙŠŰŻ\" Ù„Ű„ŰžÙ‡Ű± Ù‚Ű§ŰŠÙ…Ű© ÙƒŰ§Ù…Ù„Ű©\n"
+"ŰšŰ§Ù„ŰšÙ„ŰŻŰ§Ù†."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Calendar"
+msgstr "Ű§Ù„ŰȘقويم"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
+"Restore Selected\n"
+"Catalog Entry"
msgstr ""
-"\n"
-"ŰŁÙŠŰ¶Ű§Ù‹ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…Ù‡ÙŠŰŠŰ© ŰšÙ…Ù„ÙŰ§ŰȘ PPD من Ù…Ű”Ù†Ù‘ŰčÙŠÙ‡Ű§ ŰŁÙˆ ŰšÙ…ŰŽŰșÙ„Ű§ŰȘ CUPS Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙ‡Ű§ Ù„Ű§ "
-"يمكن Ù†Ù‚Ù„Ù‡Ű§."
+"ۧ۳ŰȘŰčŰŻ Ù…ŰŻŰźÙ„\n"
+"Ű§Ù„ÙƒŰȘŰ§Ù„ÙˆŰș Ű§Ù„Ù…ŰźŰȘۧ۱"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
msgstr ""
-"ŰšŰ§Ù„Ű„Ű¶Ű§ÙŰ© Ű§Ù„Ù‰ Ű°Ù„Ùƒ, ÙŰ„Ù† Ű§Ù„Ű”ÙÙˆÙ Ű§Ù„ŰȘي لم يŰȘم ŰčÙ…Ù„Ù‡Ű§ ŰšÙ‡Ű°Ű§ Ű§Ù„ŰšŰ±Ù†Ű§Ù…Ű­ ŰŁÙˆ \"foomatic-"
-"configure\" Ù„Ű§ يمكن Ù†Ù‚Ù„Ù‡Ű§."
+"Ù„Ű§ŰłŰȘŰźŰŻŰ§Ù… ۷ۧۚŰčŰ© lpd ŰšŰčÙŠŰŻŰ©, Űčليك ۧŰč۷ۧۥ Ű§ŰłÙ… Ù…ŰłŰȘŰ¶ÙŠÙ ŰźŰ§ŰŻÙ… Ű§Ù„Ű·Ű§ŰšŰčŰ© و Ű§ŰłÙ… Ű§Ù„Ű·Ű§ŰšŰčŰ© "
+"Űčلى Ű°Ù„Ùƒ Ű§Ù„ŰźŰ§ŰŻÙ…."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD و LPRng Ù„Ű§ ŰȘŰŻŰčم ۷ۧۚŰčۧŰȘ IPP.\n"
+msgid "Iceland"
+msgstr "ŰąÙŠŰłÙ„Ù†ŰŻŰ§"
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ ÙŠŰŻŰčم ÙÙ‚Ű· Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…Ű­Ù„ÙŠŰ© و ۷ۧۚŰčۧŰȘ LPD Ű§Ù„ŰšŰčÙŠŰŻŰ© و ۷ۧۚŰčۧŰȘ Socket/TCP.\n"
+msgid "consolehelper missing"
+msgstr "consolehelper missing"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS Ù„Ű§ ÙŠŰŻŰčم Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Űčلى ŰŁŰŹÙ‡ŰČŰ© Novell Ű§Ù„ŰźŰ§ŰŻÙ…Ű© ŰŁÙˆ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„ŰȘي ŰȘŰ±ŰłÙ„ "
-"Ű§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„Ù‰ ŰŁÙ…Ű± ۭ۱.\n"
+msgid "stopped"
+msgstr "مŰȘÙˆÙ‚ÙŰ©"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"يمكنك نقل ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„ŰȘي ŰȘم ŰčÙ…Ù„Ù‡Ű§ للـSpooler %s Ű§Ù„Ù‰ %s, Ű§Ù„Ù€spooler "
-"Ű§Ù„Ű­Ű§Ù„ÙŠ. كل ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ© (Ű§ŰłÙ… Ű§Ù„Ű·Ű§ŰšŰčŰ©, Ű§Ù„ÙˆŰ”Ù, Ű§Ù„Ù…ÙƒŰ§Ù†, نوŰč Ű§Ù„ÙˆŰ”Ù„Ű©, و ŰźÙŠŰ§Ű±Ű§ŰȘ "
-"Ű§Ù„Ű„Űčۯۧۯ Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠ) يŰȘم ŰŁŰźŰ°Ù‡Ű§, لكن لن يŰȘم نقل Ű§Ù„ÙˆŰžŰ§ŰŠÙ.\n"
-"Ù„Ű§ يمكن نقل كل Ű§Ù„Ű”ÙÙˆÙ Ù„Ù„ŰŁŰłŰšŰ§Űš Ű§Ù„ŰȘŰ§Ù„ÙŠŰ©:\n"
+msgid "Whether the FPU has an irq vector"
+msgstr "ۧ۰ۧ ÙƒŰ§Ù† Ű§Ù„Ù€FPU Ù„ŰŻÙŠÙ‡ مŰȘŰŹÙ‡ IRQ"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-"ŰȘم ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Ű·Ű§ŰšŰčŰ© ŰąÙ„ÙŠŰ§Ù‹ لكي ŰȘŰčŰ·ÙŠÙƒ Ű§Ù„Ù‚ŰŻŰ±Ű© Űčلى Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ ŰłÙˆŰ§Ù‚Ű§ŰȘ ŰšŰ·Ű§Ù‚Ű§ŰȘ Ű§Ù„Ű”ÙˆŰ± "
-"Űčلى ŰŹÙ‡Ű§ŰČك Ű§Ù„ŰŽŰźŰ”ÙŠ. يمكنك Ű§Ù„ŰąÙ† Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ ŰšŰ·Ű§Ù‚Ű§ŰȘ Ű§Ù„Ű”ÙˆŰ± ۚۧ۳ŰȘŰźŰŻŰ§Ù… Ű§Ù„ŰšŰ±Ù†Ű§Ù…ŰŹ "
-"Ű§Ù„Ű±ŰłÙˆÙ…ÙŠ \"MToolsFM\" (Ű§Ù„Ù‚Ű§ŰŠÙ…Ű©: \"ŰȘŰ·ŰšÙŠÙ‚Ű§ŰȘ\" -> \"ŰŁŰŻÙˆŰ§ŰȘ Ű§Ù„Ù…Ù„ÙŰ§ŰȘ\" -> \"Ù…ŰŻÙŠŰ± "
-"Ù…Ù„ÙŰ§ŰȘ MTools\") ŰŁÙˆ ۚۧ۳ŰȘŰźŰŻŰ§Ù… ŰŁŰŻÙˆŰ§ŰȘ \"mtools\" في ۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű± (ŰŁŰŻŰźÙ„ \"man "
-"mtools\" في ۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű± لمŰČÙŠŰŻ من Ű§Ù„Ù…ŰčÙ„ÙˆÙ…Ű§ŰȘ). يمكنك Ű§ÙŠŰŹŰ§ŰŻ Ù†ŰžŰ§Ù… Ù…Ù„ÙŰ§ŰȘ Ű§Ù„ŰšŰ·Ű§Ù‚Ű© "
-"ŰȘŰ­ŰȘ Ű­Ű±Ù Ű§Ù„ŰłÙˆŰ§Ù‚Ű© \"p:\", ŰŁÙˆ Ű­Ű±ÙˆÙ Ű§Ù„ŰłÙˆŰ§Ù‚Ű§ŰȘ Ű§Ù„ŰŁŰźŰ±Ù‰ ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ù„ŰŻÙŠÙƒ ŰŁÙƒŰ«Ű± من ۷ۧۚŰčŰ© "
-"HP مŰč ŰłÙˆŰ§Ù‚Ű§ŰȘ ŰšŰ·Ű§Ù‚Ű§ŰȘ Ű”ÙˆŰ±. في \"MToolsFM\" يمكنك Ű§Ù„ŰȘŰ­ÙˆÙŠÙ„ ŰšÙŠÙ† Ű­Ű±ÙˆÙ Ű§Ù„ŰłÙˆŰ§Ù‚Ű§ŰȘ Űčلى "
-"Ű§Ù„Ű­Ù‚Ù„ Ű§Ù„Ù…ÙˆŰŹÙˆŰŻ في Ű§Ù„Ű±ÙƒÙ† Ű§Ù„ŰŁÙŠŰłŰ± Ű§Ù„Ù‰ Ű§Ù„ŰŁŰčلى في Ù‚ÙˆŰ§ŰŠÙ… Ű§Ù„Ù…Ù„ÙŰ§ŰȘ."
+msgid "Ext2"
+msgstr "Ext2"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#, c-format
+msgid "Expand Tree"
+msgstr "Expand Tree"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
+"The old \"%s\" driver is blacklisted.\n"
"\n"
-"Do not use \"scannerdrake\" for this device!"
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-"Ű§Ù„ŰŹÙ‡Ű§ŰČ Ű§Ù„Ù…ŰȘŰčŰŻŰŻ Ű§Ù„ÙˆŰžŰ§ŰŠÙ Ű§Ù„ŰźŰ§Ű” ŰšÙƒ ŰȘم ŰȘÙ‡ÙŠŰŠŰȘه ŰąÙ„ÙŠŰ§Ù‹ ليŰȘمكن من Ű§Ù„Ù…ŰłŰ­ Ű§Ù„Ű¶ÙˆŰŠÙŠ. يمكنك "
-"Ű§Ù„ŰąÙ† ۧ۳ŰȘŰźŰŻŰ§Ù… Ű§Ù„Ù…ŰłŰź Ű§Ù„Ű¶ÙˆŰŠÙŠ ۚۧ۳ŰȘŰźŰŻŰ§Ù… \"scanimage\" (\"scanimage -d hp:%s\" "
-"لŰȘŰ­ŰŻÙŠŰŻ Ű§Ù„Ù…Ű§ŰłŰ­ Ű§Ù„Ű¶ÙˆŰŠÙŠ ۧ۰ۧ ÙƒŰ§Ù† Ù„ŰŻÙŠÙƒ ŰŁÙƒŰ«Ű± من ÙˆŰ§Ű­ŰŻ) من ۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű± ŰŁÙˆ ŰšŰ§Ù„ŰšŰ±Ű§Ù…ŰŹ "
-"Ű§Ù„Ű±ŰłÙˆÙ…ÙŠŰ© \"xscanimage\" ŰŁÙˆ \"xsane\". ۧ۰ۧ كنŰȘ ŰȘŰłŰȘŰźŰŻÙ… GIMP, يمكنك ŰŁÙŠŰ¶Ű§Ù‹ Ű§Ù„Ù…ŰłŰ­ "
-"Ű§Ù„Ű¶ÙˆŰŠÙŠ ۚۧ۳ŰȘŰźŰŻŰ§Ù… Ű§Ù„Ù‚ÙˆŰ§ŰŠÙ… \"File\"/\"Acquire\". ŰŽŰșل Ű§Ù„ŰŁÙ…Ű± \"man scanimage\" في "
-"۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű± Ù„Ù„Ű­Ű”ÙˆÙ„ Űčلى مŰČÙŠŰŻ من Ű§Ù„Ù…ŰčÙ„ÙˆÙ…Ű§ŰȘ.\n"
+"Ù…ŰŽŰșل \"%s\" Ű§Ù„Ù‚ŰŻÙŠÙ… Űčلى Ű§Ù„Ù‚Ű§ŰŠÙ…Ű© Ű§Ù„ŰłÙˆŰŻŰ§ŰĄ.\n"
"\n"
-"Ù„Ű§ ŰȘŰłŰȘŰźŰŻÙ… \"scannerdrake\" Ù„Ù‡Ű°Ű§ Ű§Ù„ŰŹÙ‡Ű§ŰČ!"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printing test page(s)..."
-msgstr "ŰŹŰ§Ű±ÙŠ ۷ۚۧŰčŰ© Ű§Ù„Ű”ÙŰ­Ű§ŰȘ Ű§Ù„Ű„ŰźŰȘŰšŰ§Ű±ÙŠŰ©..."
+"في ŰšŰč۶ Ű§Ù„Ű­Ű§Ù„Ű§ŰȘ قيل ŰŁÙ†Ù‡ ÙŠŰłŰšŰš Ű§Ù†Ù‡ÙŠŰ§Ű± في Ű§Ù„Ù†ÙˆŰ§Ű© ŰčÙ†ŰŻ ۧŰČŰ§Ù„Ű© Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„.\n"
+"\n"
+"Ù…ŰŽŰșل \"%s\" Ű§Ù„ŰŹŰŻÙŠŰŻ ŰłÙŠŰȘم ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡ ŰčÙ†ŰŻ ŰȘŰŽŰșيل Ű§Ù„ŰŹÙ‡Ű§ŰČ ÙÙŠ Ű§Ù„Ù…Ű±Ű© Ű§Ù„Ù‚Ű§ŰŻÙ…Ű©."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Print option list"
-msgstr "Ù‚Ű§ŰŠÙ…Ű© ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„Ű·Ű§ŰšŰčŰ©"
+msgid "Expert Mode"
+msgstr "ÙˆŰ¶ŰčÙŠŰ© Ű§Ù„ŰźŰšÙŠŰ±"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„Ű·ŰšŰ§ŰčŰ© Űčلى Ű§Ù„Ű·Ű§ŰšŰčŰ© \"%s\""
+msgid "Printer options"
+msgstr "ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„Ű·Ű§ŰšŰčŰ©"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Printing/Photo Card Access on \"%s\""
+msgid "Local Network adress"
+msgstr "ŰčÙ†ÙˆŰ§Ù† Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ©"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„Ű·ŰšŰ§ŰčŰ©/Ű§Ù„Ù…ŰłŰ­ Űčلى \"%s\""
+msgid "Backup your System files. (/etc directory)"
+msgstr "Ű§Ù†ŰłŰź Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ù†ŰžŰ§Ù…: (ŰŻÙ„ÙŠÙ„ /etc)"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Printing/Scanning/Photo Cards on \"%s\""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
"\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
+"\n"
+"Do you want to install the updates ?"
msgstr ""
-"للمŰčŰ±ÙŰ© Ű­ÙˆÙ„ Ű§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű© Ù„Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„Ű­Ű§Ù„ÙŠŰ©, Ű„Ù…Ű§ ŰŁÙ† ŰȘÙ‚Ű±ŰŁ Ű§Ù„Ù‚Ű§ŰŠÙ…Ű© ŰŁŰŻÙ†Ű§Ù‡ و "
-"Ű§Ù†Ù‚Ű± \"Ù‚Ű§ŰŠÙ…Ű© ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„Ű·Ű§ŰšŰčŰ©\".%s%s\n"
+"ŰȘŰłŰȘŰ·ÙŠŰč Ű§Ù„ŰąÙ† ŰȘنŰČيل Ű§Ù„Ű­ŰČم Ű§Ù„Ù…Ű­ŰŻÙ‘Ű«Ű©. Ù‡Ű°Ù‡ Ű§Ù„Ű­ŰČم\n"
+"ŰȘم ŰȘŰ­ŰŻÙŠŰ«Ù‡Ű§ ŰšŰčŰŻ ۧ۔ۯۧ۱ Ű§Ù„ŰȘوŰČيŰčŰ©. Ù‚ŰŻ\n"
+"ŰȘŰ­ŰȘوي Űčلى Ű§Ű”Ù„Ű§Ű­Ű§ŰȘ ŰŁÙ…Ù†ÙŠŰ© ŰŁÙˆ Ű§Ű”Ù„Ű§Ű­Ű§ŰȘ لŰčÙŠÙˆŰš ŰšŰ±Ù…ŰŹÙŠŰ©.\n"
+"\n"
+"لŰȘنŰČيل Ù‡Ű°Ù‡ Ű§Ù„Ű­ŰČم, ŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ ŰŁÙ† ŰȘكون Ù„ŰŻÙŠÙƒ ۧŰȘŰ”Ű§Ù„ \n"
+"ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ.\n"
"\n"
+"هل ŰȘŰ±ÙŠŰŻ ŰȘنŰČيل Ù‡Ű°Ù‡ Ű§Ù„ŰȘŰ­ŰŻÙŠŰ«Ű§ŰȘ ۟"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Samba Server"
+msgstr "ŰźŰ§ŰŻÙ… Samba"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg, alert=1)\n"
"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
+"Enable/Disable IP spoofing protection."
msgstr ""
+"Arguments: (arg, alert=1)\n"
"\n"
-"Ű§Ù„ŰŁÙˆŰ§Ù…Ű± \"%s\" و \"%s\" ŰȘŰłÙ…Ű­ لك ŰšŰȘŰčŰŻÙŠÙ„ ۧŰčۯۧۯۧŰȘ Ű§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ Ù„ÙˆŰžÙŠÙŰ© ۷ۚۧŰčŰ© Ù…Ű­ŰŻŰŻŰ©. "
-"ۚۚ۳ۧ۷۩ قم ŰšŰ„Ű¶Ű§ÙŰ© Ű§Ù„Ű„Űčۯۧۯ Ű§Ù„Ù…Ű·Ù„ÙˆŰš Ű§Ù„Ù‰ ۳۷۱ Ű§Ù„ŰąÙˆŰ§Ù…Ű±, Ù…Ű«Ű§Ù„ \"%s <file>\".\n"
+"Enable/Disable IP spoofing protection."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"يمكنك ÙƒŰ°Ù„Ùƒ ۧ۳ŰȘŰźŰŻŰ§Ù… Ű§Ù„ŰšŰ±Ù†Ű§Ù…ŰŹ Ű§Ù„Ű±ŰłÙˆÙ…ÙŠ \"xpdq\" لŰȘŰčيين Ű§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ و Ű§Ù„ŰȘŰčŰ§Ù…Ù„ مŰč "
-"ÙˆŰžŰ§ŰŠÙ Ű§Ù„Ű·ŰšŰ§ŰčŰ©.\n"
-"ۧ۰ۧ كنŰȘ ŰȘŰłŰȘŰčÙ…Űš ÙƒÙŠŰŻÙŠ ÙƒŰšÙŠŰŠŰ© ۳۷ۭ مكŰȘŰš ÙÙ„ŰŻÙŠÙƒ ŰŁÙŠÙ‚ÙˆÙ†Ű© \"Ù„Ù„Ű·ÙˆŰ§Ű±ŰŠ\", Ű§ŰłÙ…Ù‡Ű§ \"STOP "
-"Printer!\", ŰȘقوم ŰšŰ„ÙŠÙ‚Ű§Ù كل ÙˆŰžŰ§ŰŠÙ Ű§Ù„Ű·ŰšŰ§ŰčŰ© ÙÙˆŰ±Ű§Ù‹ ŰčÙ†ŰŻ Ű§Ù„Ù†Ù‚Ű± ŰčÙ„ÙŠÙ‡Ű§. Ù‡Ű°Ű§ Ű§Ù„Ù…Ű«Ű§Ù„ "
-"Ù…ÙÙŠŰŻ Ù„Ù„Ű­Ű§Ù„Ű§ŰȘ Ű§Ù„ŰȘي ÙŠŰ­Ű”Ù„ ÙÙŠÙ‡Ű§ ŰȘŰč۫۱ في ۧ۳ŰȘŰźŰŻŰ§Ù… Ű§Ù„ÙˆŰ±Ù‚.\n"
+msgid "Australian Optus cable TV"
+msgstr "Australian Optus cable TV"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
msgstr ""
-"يمكنك ۧ۳ŰȘŰźŰŻŰ§Ù… Ù‡Ű°Ű§ Ű§Ù„ŰŁÙ…Ű± ŰŁÙŠŰ¶Ű§Ù‹ في Ű­Ù‚Ù„ \"ŰŁÙ…Ű± Ű§Ù„Ű·ŰšŰ§ŰčŰ©\" في Ù…Ű±ŰšŰčۧŰȘ Ű­ÙˆŰ§Ű± Ű§Ù„Ű·Ű§ŰšŰčŰ© "
-"في Ű§Ù„ŰčŰŻÙŠŰŻ من Ű§Ù„ŰȘŰ·ŰšÙŠÙ‚Ű§ŰȘ. لكن Ù‡Ù†Ű§ Ù„Ű§ ŰȘقم ۚۄŰč۷ۧۥ Ű§ŰłÙ… Ű§Ù„Ù…Ù„Ù Ù„ŰŁÙ† ملف Ű§Ù„Ű·ŰšŰ§ŰčŰ© يŰȘم "
-"ŰȘÙˆÙÙŠŰ±Ù‡ Űčن Ű·Ű±ÙŠÙ‚ Ű§Ù„ŰȘŰ·ŰšÙŠÙ‚.\n"
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr "Ù„Ű·ŰšŰ§ŰčŰ© ملف من ۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű± ۧ۳ŰȘŰźŰŻÙ… Ű§Ù„ŰŁÙ…Ű± \"%s <file> ŰŁÙˆ \"%s <file>\".\n"
+msgid "Subnet:"
+msgstr "Subnet:"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Ù„Ù„Ű­Ű”ÙˆÙ„ Űčلى Ù‚Ű§ŰŠÙ…Ű© ŰšŰ§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű© Ù„Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„Ù…ŰźŰȘۧ۱۩ ۧ۶ŰșŰ· Űčلى ŰČ۱ \"Ù‚Ű§ŰŠÙ…Ű© "
-"ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„Ű·Ű§ŰšŰčŰ©\"."
+msgid "Zimbabwe"
+msgstr "ŰČÙŠÙ…ŰšŰ§ŰšÙˆÙŠ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Ű§Ù„ŰŁÙ…Ű± \"%s\" ÙŠŰłÙ…Ű­ لك ÙƒŰ°Ù„Ùƒ يŰȘŰčŰŻÙŠÙ„ ۧŰčۯۧۯۧŰȘ Ű§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ Ù„ÙˆŰžÙŠÙŰ© ۷ۚۧŰčŰ© Ù…Ű­ŰŻŰŻŰ©. ŰšÙƒÙ„ "
-"ۚ۳ۧ۷۩ ŰŁŰ¶Ù Ű§Ù„Ű„Űčۯۧۯ Ű§Ù„Ù…Ű·Ù„ÙˆŰš Ű§Ù„Ù‰ ۳۷۱ Ű§Ù„ŰąÙˆŰ§Ù…Ű±, Ù…Ű«Ű§Ù„ \"%s <file>\". "
+msgid "Please enter the host name or IP."
+msgstr "ÙŰ¶Ù„Ű§ ŰŁŰŻŰźÙ„ Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ ŰŁÙˆ ŰčÙ†ÙˆŰ§Ù† IP."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr "Ù„Ű·ŰšŰ§ŰčŰ© ملف من ۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű± ۧ۳ŰȘŰźŰŻŰ§Ù… Ű§Ù„ŰŁÙ…Ű± \"%s <file>\".\n"
+msgid "When"
+msgstr "مŰȘى "
-#: ../../printer/printerdrake.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Second DNS Server (optional)"
+msgstr "ŰźŰ§ŰŻÙ… DNS Ű§Ù„Ű«Ű§Ù†ÙŠ (ۧ۟ŰȘÙŠŰ§Ű±ÙŠ)"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Finland"
+msgstr "ÙÙ†Ù„Ù†ŰŻŰ§"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Here is a list of the available printing options for the current printer:\n"
+"Arguments: (arg)\n"
"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
msgstr ""
-"Ù‡Ű°Ù‡ Ù‚Ű§ŰŠÙ…Ű© ŰšŰ§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű© Ù„Ù„Ű·ŰšŰ§ŰčŰ© Űčلى Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„Ű­Ű§Ù„ÙŠŰ©:\n"
+"Arguments: (arg)\n"
"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"يمكنك ۧ۳ŰȘŰźŰŻŰ§Ù… Ù‡Ű°Ù‡ Ű§Ù„ŰŁÙˆŰ§Ù…Ű± ŰŁÙŠŰ¶Ű§Ù‹ في Ű­Ù‚Ù„ \"ŰŁÙ…Ű± Ű§Ù„Ű·ŰšŰ§ŰčŰ©\" في Ù…Ű±ŰšŰčۧŰȘ Ű­ÙˆŰ§Ű± Ű§Ù„Ű·ŰšŰ§ŰčŰ© "
-"في Ű§Ù„ŰčŰŻÙŠŰŻ من Ű§Ù„ŰȘŰ·ŰšÙŠÙ‚Ű§ŰȘ, لكن Ù„Ű§ ŰȘقم Ù‡Ù†Ű§ ۚۄŰč۷ۧۥ Ű§ŰłÙ… Ű§Ù„Ù…Ù„Ù Ù„ŰŁÙ† Ű§Ù„Ù…Ù„Ù Ű§Ù„Ù…Ű·Ù„ÙˆŰš "
-"۷ۚۧŰčŰȘه يŰȘم ۧŰčŰ·Ű§Ű€Ù‡ من Ù‚ŰšÙ„ Ű§Ù„ŰȘŰ·ŰšÙŠÙ‚.\n"
+msgid "Color depth: %s\n"
+msgstr "Űčمق Ű§Ù„ŰŁÙ„ÙˆŰ§Ù†: %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Ù„Ű·ŰšŰ§ŰčŰ© ملف من ۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű± يمكنك ŰŁÙ† ŰȘŰłŰȘŰźŰŻÙ… Ű§Ù„ŰŁÙ…Ű± \"%s <file>\" ŰŁÙˆ ŰŁÙ† ŰȘŰłŰȘŰźŰŻÙ… "
-"ۣۯۧ۩ ۷ۚۧŰčŰ© Ű±ŰłÙˆÙ…ÙŠŰ©: \"xpp <file>\" ŰŁÙˆ \"kprinter <file>\". Ű§Ù„ŰŁŰŻÙˆŰ§ŰȘ Ű§Ù„Ű±ŰłÙˆÙ…ÙŠŰ© "
-"ŰȘŰłÙ…Ű­ لك ۚۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ و ŰȘŰčŰŻÙŠÙ„ ŰźÙŠŰ§Ű±Ű§ŰȘÙ‡Ű§ ŰšŰłÙ‡ÙˆÙ„Ű©.\n"
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "Ù„Ű§ يمكنك ۧŰČŰ§Ù„Ű© ۧ۟ŰȘÙŠŰ§Ű± Ù‡Ű°Ù‡ Ű§Ù„Ű­ŰČÙ…Ű©. ÙŠŰŹŰš ŰȘŰ±Ù‚ÙŠŰȘÙ‡Ű§"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Did it work properly?"
-msgstr "هل ŰčملŰȘ ŰšŰ§Ù„ŰŽÙƒÙ„ Ű§Ù„Ű”Ű­ÙŠŰ­ŰŸ"
+msgid "Loading from floppy"
+msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„ من Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…Ű±Ù†"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
-"ŰȘم Ű§Ű±ŰłŰ§Ù„ Ű§Ù„Ű”ÙŰ­Ű§ŰȘ Ű§Ù„Ű„ŰźŰȘŰšŰ§Ű±ÙŠŰ© Ű§Ù„Ù‰ Ű§Ù„Ű·Ű§ŰšŰčŰ©.\n"
-"Ù‚ŰŻ ÙŠŰłŰȘŰșŰ±Ù‚ Ù‡Ű°Ű§ ŰšŰč۶ Ű§Ù„ÙˆÙ‚ŰȘ Ű­ŰȘى ŰȘۚۯۣ Ű§Ù„Ű·Ű§ŰšŰčŰ©.\n"
+"ÙŠÙŰłŰȘŰźŰŻÙ… Drakperm Ù„Ű§ŰłŰȘŰč۱ۧ۶ Ű§Ù„Ù…Ù„ÙŰ§ŰȘ Ű§Ù„ŰȘي يŰȘم ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡Ű§ لŰȘŰčŰŻÙŠÙ„ Ű§Ù„Ű”Ù„Ű§Ű­ÙŠŰ§ŰȘ, و "
+"Ű§Ù„Ù…Ù„Ű§Ùƒ و Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…ÙŠÙ† ۚۧ۳ŰȘŰźŰŻŰ§Ù… msec.\n"
+"يمكنك ÙƒŰ°Ù„Ùƒ ŰȘŰ­Ű±ÙŠŰ± Ù‚ÙˆŰ§ŰčŰŻÙƒ Ű§Ù„ŰźŰ§Ű”Ű© Ű§Ù„ŰȘي ŰłŰȘُكŰȘÙŽŰš فوق Ű§Ù„Ù‚ÙˆŰ§Ù‡ŰŻ Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠŰ©."
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"ŰȘم Ű§Ű±ŰłŰ§Ù„ Ű§Ù„Ű”ÙŰ­Ű§ŰȘ Ű§Ù„Ű„ŰźŰȘŰšŰ§Ű±ÙŠŰ© Ű§Ù„Ù‰ Ű§Ù„Ű·Ű§ŰšŰčŰ©.\n"
-"Ù‚ŰŻ ÙŠŰłŰȘŰșŰ±Ù‚ Ù‡Ű°Ű§ ŰšŰč۶ Ű§Ù„ÙˆÙ‚ŰȘ Ű­ŰȘى ŰȘۚۯۣ Ű§Ù„Ű·Ű§ŰšŰčŰ©.\n"
-"Ű­Ű§Ù„Ű© Ű§Ù„Ű·ŰšŰ§ŰčŰ©:\n"
-"%s\n"
-"\n"
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do not print any test page"
-msgstr "Ù„Ű§ ŰȘŰ·ŰšŰč ŰŁÙŠ Ű”ÙŰ­Ű§ŰȘ ۧ۟ŰȘŰšŰ§Ű±ÙŠŰ©"
+msgid "Slovenia"
+msgstr "ŰłÙ„ÙˆÙÙŠÙ†ÙŠŰ§"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Photo test page"
-msgstr "Ű”ÙŰ­Ű© ۧ۟ŰȘŰšŰ§Ű±ÙŠŰ© Ù„Ű”ÙˆŰ±Ű©"
+msgid ""
+"Enter a user\n"
+"%s"
+msgstr ""
+"ŰŁŰŻŰźÙ„ Ù…ŰłŰȘŰźŰŻÙ…\n"
+"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Alternative test page (A4)"
-msgstr "Ű”ÙŰ­Ű© ۧ۟ŰȘŰšŰ§Ű±ÙŠŰ© ŰšŰŻÙŠÙ„Ű© (A4)"
+msgid ""
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
+msgstr ""
+"- ŰŁŰŹÙ‡ŰČŰ© PCI و USB: Ù‡Ű°Ű§ يŰč۱۶ Ù‚Ű§ŰŠÙ…Ű© Ű§Ù„Ù…Ű”Ù†Űčين و Ű§Ù„ŰŁŰŹÙ‡ŰČŰ© و Ű§Ù„Ù…Ű”Ù†Űčين Ű§Ù„Ű«Ű§Ù†ÙˆÙŠÙŠÙ† و "
+"Ű§Ù„ŰŁŰŹÙ‡ŰČŰ© Ű§Ù„Ű«Ű§Ù†ÙˆÙŠŰ© Ù„Ù‡ÙˆÙŠŰ§ŰȘ PCI/USB"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "Ű”ÙŰ­Ű© ۧ۟ŰȘŰšŰ§Ű±ÙŠŰ© ŰšŰŻÙŠÙ„Ű© (Letter)"
+msgid "ProgressBar color selection"
+msgstr "Ű„ŰźŰȘÙŠŰ§Ű± لون ŰŽŰ±ÙŠŰ· Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Standard test page"
-msgstr "Ű”ÙŰ­Ű© ۧ۟ŰȘŰšŰ§Ű±ÙŠŰ© Ù‚ÙŠŰ§ŰłÙŠŰ©"
+msgid ""
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
+msgstr ""
+"Ù‡Ű§ Ù‡Ù†Ű§ Ű§Ù„Ù…ŰŻŰźÙ„Ű§ŰȘ Ű§Ù„Ù…ŰźŰȘÙ„ÙŰ©.\n"
+"يمكنك Ű§Ű¶Ű§ÙŰ© Ù…ŰŻŰźÙ„Ű§ŰȘ ŰŁŰźŰ±Ù‰ ŰŁÙˆ ŰȘŰșÙŠÙŠŰ± Ű§Ù„Ù…ÙˆŰŹÙˆŰŻÙŠÙ†."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Print"
-msgstr "Ű„Ű·ŰšŰč"
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "No test pages"
-msgstr "Ù„Ű§ Ű”ÙŰ­Ű§ŰȘ ۧ۟ŰȘŰšŰ§Ű±ÙŠŰ©"
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
msgstr ""
-"ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ Ű§Ù„Ű”ÙŰ­Ű§ŰȘ Ű§Ù„Ű„ŰźŰȘŰšŰ§Ű±ÙŠŰ© Ű§Ù„ŰȘي ŰȘÙˆŰŻ ۷ۚۧŰčŰȘÙ‡Ű§.\n"
-"Ù…Ù„Ű­ÙˆŰžŰ©: Ű§Ù„Ű”ÙŰ­Ű© Ű§Ù„Ű„ŰźŰȘŰšŰ§Ű±ÙŠŰ© Ù„Ű”ÙˆŰ±Ű© ŰłŰȘŰłŰȘŰșŰ±Ù‚ وقŰȘŰ§Ù‹ Ű·ÙˆÙŠÙ„Ű§Ù‹ Ù„Ű·ŰšŰ§ŰčŰȘÙ‡Ű§ و Űčلى ۷ۧۚŰčۧŰȘ "
-"Ű§Ù„Ù„ÙŠŰČ۱ ŰšÙƒÙ…ÙŠŰ© Ű°Ű§ÙƒŰ±Ű© Ù‚Ù„ÙŠÙ„Ű© Ù‚ŰŻ Ù„Ű§ يŰȘم ۷ۚۧŰčŰȘÙ‡Ű§ Ù…Ű·Ù„Ù‚Ű§Ù‹. في ŰŁŰșÙ„Űš Ű§Ù„ŰŁŰ­ÙŠŰ§Ù† يكفي ŰŁÙ† "
-"ŰȘŰ·ŰšŰč Ű§Ù„Ű”ÙŰ­Ű© Ű§Ù„Ű„ŰźŰȘŰšŰ§Ű±ÙŠŰ© Ű§Ù„Ù‚ÙŠŰ§ŰłÙŠŰ©."
+"ŰȘŰŽŰșل Ű§Ù„ŰŁÙˆŰ§Ù…Ű± Ű§Ù„Ù…ÙŰŹŰŻÙˆÙ„Ű© Űčن Ű·Ű±ÙŠÙ‚ ŰŁÙ…Ű± at ŰčÙ†ŰŻ Ű§Ù„ÙˆÙ‚ŰȘ Ű§Ù„Ù…Ű­ŰŻŰŻ\n"
+"لŰȘŰŽŰșيل at, و ŰȘقوم ŰšŰȘŰŽŰșيل Ű§Ù„ŰŁÙˆŰ§Ù…Ű± Ű§Ù„ŰŻÙ‚ŰčÙŠŰ© ŰčÙ†ŰŻÙ…Ű§ يكون مŰȘÙˆŰłŰ· Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„ Ù‚Ù„ÙŠÙ„Ű§ÙŽ."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Test pages"
-msgstr "Ű”ÙŰ­Ű§ŰȘ ۧ۟ŰȘŰšŰ§Ű±ÙŠŰ©"
+msgid "Radio support:"
+msgstr "ŰŻŰčم Ű§Ù„Ű±Ű§ŰŻÙŠÙˆ:"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"هل ŰȘŰ±ÙŠŰŻ ŰȘŰčيين Ù‡Ű°Ù‡ Ű§Ù„Ű·Ű§ŰšŰčŰ© (\"%s\")\n"
-"ÙƒŰ·Ű§ŰšŰčŰ© Ű§ÙŰȘŰ±Ű§Ű¶ÙŠŰ©ŰŸ"
+msgid "Installing SANE packages..."
+msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰ«ŰšÙŠŰȘ Ű­ŰČم SANE..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Option %s out of range!"
-msgstr "Ű§Ù„ŰźÙŠŰ§Ű± %s ۟ۧ۱ۏ Ű§Ù„Ù…ŰȘÙˆŰłŰ·!"
+msgid "boot disk creation"
+msgstr "Ű”Ù†Űč Ù‚Ű±Ű” Ù…Ű±Ù† Ù„ŰšŰŻŰĄ Ű§Ù„Ù†ŰžŰ§Ù…"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Option %s must be a number!"
-msgstr "Ű§Ù„ŰźÙŠŰ§Ű± %s ÙŠŰŹŰš ŰŁÙ† يكون Ű±Ù‚Ù…Ű§Ù‹!"
+msgid "LDAP"
+msgstr "LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Ű§Ù„ŰźÙŠŰ§Ű± %s ÙŠŰŹŰš ŰŁÙ† يكون Ű±Ù‚Ù…Ű§ Ű”Ű­ÙŠŰ­Ű§Ù‹!"
+msgid "SILO"
+msgstr "SILO"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
#, c-format
-msgid "Printer default settings"
-msgstr "ۧŰčۯۧۯۧŰȘ Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠŰ©"
+msgid "Change type"
+msgstr "ŰșÙŠÙ‘Ű± Ű§Ù„Ù†ÙˆŰč"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "SILO Installation"
+msgstr "ŰȘŰ«ŰšÙŠŰȘ SILO"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use CD/DVDROM to backup"
+msgstr "ۧ۳ŰȘŰźŰŻÙ… CD/DVDROM Ù„Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ"
+
+#: ../../install_messages.pm:1
#, c-format
msgid ""
-"Printer default settings\n"
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
-"ۧŰčۯۧۯۧŰȘ Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠŰ©\n"
+"ŰȘÙ‡Ű§Ù†ÙŠÙ†Ű§, Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ Ù‚ŰŻ Ű§Ù†ŰȘهى.\n"
+"Ű§Ű­Ű°Ù ÙˆŰłÙŠŰ· Ű§Ù„Ű„Ù‚Ù„Ű§Űč و ۧ۶ŰșŰ· ŰČ۱ Ű§ŰŻŰźÙ„ Ù„Ű„Űčۧۯ۩ Ű§Ù„ŰȘŰŽŰșيل.\n"
"\n"
-"ÙŠŰŹŰš Űčليك Ű§Ù„ŰȘŰŁÙƒŰŻ ۧ۰ۧ ÙƒŰ§Ù† Ű­ŰŹÙ… Ű§Ù„Ű”ÙŰ­Ű© و نوŰč Ű§Ù„Ű­ŰšŰ±/ÙˆŰ¶Űč Ű§Ù„Ű·ŰšŰ§ŰčŰ© (Ű§Ù† ÙˆŰŹŰŻ) ŰšŰ§Ù„Ű„Ű¶Ű§ÙŰ© "
-"Ű§Ù„Ù‰ ۧŰčۯۧۯۧŰȘ Ű§Ù„ŰčŰȘۧۯ Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù„ÙŠŰČ۱ (Ű§Ù„Ű°Ű§ÙƒŰ±Ű©, ÙˆŰ­ŰŻŰ§ŰȘ Ű§Ù„ŰŻÙˆŰšÙ„ÙƒŰł, Ű§Ù„Ù…Ù†Ű”Ű§ŰȘ "
-"Ű§Ù„Ű„Ű¶Ű§ÙÙŠŰ©) مŰčŰŻÙ‘Ű© ŰšŰŽÙƒÙ„ Ű”Ű­ÙŠŰ­. Ù„Ű§Ű­Űž ŰŁÙ† ŰŹÙˆŰŻŰ© ۷ۚۧŰčŰ© ŰčŰ§Ù„ÙŠŰ© ŰŹŰŻŰ§Ù‹ Ù‚ŰŻ ŰȘŰŹÙ‡Ù„ Ű§Ù„Ű·ŰšŰ§ŰčŰ© ŰšŰ·ÙŠŰŠŰ©."
+"\n"
+"لمŰčÙ„ÙˆÙ…Ű§ŰȘ Ű­ÙˆÙ„ Ű§Ù„Ű„Ű”Ù„Ű§Ű­Ű§ŰȘ Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű© Ù„Ù‡Ű°Ű§ Ű§Ù„Ű„Ű”ŰŻŰ§Ű± من Mandrake Linux,\n"
+"ŰČ۱ Ű”ÙŰ­Ű© ŰȘŰ”Ű­ÙŠŰ­ Ű§Ù„ŰŁŰźŰ·Ű§ŰĄ Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű© من:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Ű§Ù„Ù…ŰčÙ„ÙˆÙ…Ű§ŰȘ Ű­ÙˆÙ„ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Ù†ŰžŰ§Ù… مŰȘÙˆÙŰ±Ű© في ÙŰ”Ù„\n"
+"Ù…Ű§ ŰšŰčŰŻ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ في ŰŻÙ„ÙŠÙ„ Ù…ŰłŰȘŰźŰŻÙ… Mandrake Ű§Ù„Ű±ŰłÙ…ÙŠ."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr ""
+msgid "paranoid"
+msgstr "Ù…Ű±ŰȘفŰč ŰšŰŹÙ†ÙˆÙ†"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Send mail report after each backup to:"
+msgstr "ŰŁŰ±ŰłÙ„ ŰȘÙ‚Ű±ÙŠŰ±Ű§Ù‹ ŰšŰ±ÙŠŰŻÙŠŰ§Ù‹ ŰšŰčŰŻ كل ŰčÙ…Ù„ÙŠŰ© Ù†ŰłŰź Ű§Ù„Ù‰:"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+"This command you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications. But here do not supply the file name "
+"because the file to print is provided by the application.\n"
msgstr ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+"يمكنك ۧ۳ŰȘŰźŰŻŰ§Ù… Ù‡Ű°Ű§ Ű§Ù„ŰŁÙ…Ű± ŰŁÙŠŰ¶Ű§Ù‹ في Ű­Ù‚Ù„ \"ŰŁÙ…Ű± Ű§Ù„Ű·ŰšŰ§ŰčŰ©\" في Ù…Ű±ŰšŰčۧŰȘ Ű­ÙˆŰ§Ű± Ű§Ù„Ű·Ű§ŰšŰčŰ© "
+"في Ű§Ù„ŰčŰŻÙŠŰŻ من Ű§Ù„ŰȘŰ·ŰšÙŠÙ‚Ű§ŰȘ. لكن Ù‡Ù†Ű§ Ù„Ű§ ŰȘقم ۚۄŰč۷ۧۥ Ű§ŰłÙ… Ű§Ù„Ù…Ù„Ù Ù„ŰŁÙ† ملف Ű§Ù„Ű·ŰšŰ§ŰčŰ© يŰȘم "
+"ŰȘÙˆÙÙŠŰ±Ù‡ Űčن Ű·Ű±ÙŠÙ‚ Ű§Ù„ŰȘŰ·ŰšÙŠÙ‚.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Ű„Űčۯۧۯ Lexmark Inkjet"
+msgid "Resolution"
+msgstr "ŰŻÙ‚Ű© Ű§Ù„Űč۱۶"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
msgstr ""
-"Ù…ŰŽŰșÙ„Ű§ŰȘ ۷ۧۚŰčŰȘك inkjet Ű§Ù„ŰȘي ŰȘم ŰȘÙˆÙÙŠŰ±Ù‡Ű§ من Lexmark ŰȘŰŻŰčم Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…Ű­Ù„ÙŠŰ© ÙÙ‚Ű·, "
-"Ù„Ű§ ÙŠŰŻŰčم Ű§Ù„Ù…ŰŽŰșل Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Űčلى Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű§ŰȘ Ű§Ù„ŰšŰčÙŠŰŻŰ© ŰŁÙˆ ŰźŰ§ŰŻÙ…Ű§ŰȘ Ű§Ù„Ű·ŰšŰ§ŰčŰ©. ÙŰ¶Ù„Ű§Ù‹ ÙˆŰ”Ù„ "
-"۷ۧۚŰčŰȘك Ű§Ù„Ù‰ Ù…Ù†ÙŰ° Ù…Ű­Ù„ÙŠ ŰŁÙˆ قم ŰšŰȘÙ‡ÙŠŰŠŰȘÙ‡Ű§ Űčلى Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű© Ű§Ù„Ù…Ű±ŰȘۚ۷۩ ŰšÙ‡Ű§."
+"Ù„Ù„Ű·ŰšŰ§ŰčŰ© Ű§Ù„Ù‰ ۷ۧۚŰčŰ© SMB, ŰłŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ ۧŰč۷ۧۥ Ű§ŰłÙ… Ù…ŰłŰȘŰ¶ÙŠÙ SMB (Ù…Ù„Ű­ÙˆŰžŰ©! Ù‚ŰŻ يكون "
+"Ù…ŰźŰȘÙ„ÙŰ§Ù‹ Űčن Ű§ŰłÙ… Ù…ŰłŰȘŰ¶ÙŠÙ TCP/IP!) و Ű±ŰšÙ…Ű§ ŰčÙ†ÙˆŰ§Ù† IP Ű§Ù„ŰźŰ§Ű” ŰšŰźŰ§ŰŻÙ… Ű§Ù„Ű·Ű§ŰšŰčŰ©, Ű§Ű¶Ű§ÙŰ© Ű§Ù„Ù‰ "
+"Ű§ŰłÙ… Ű§Ù„Ù…ŰŽŰ§Ű±ÙƒŰ© Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„ŰȘي ŰȘÙˆŰŻ Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„ÙŠÙ‡Ű§ ŰšŰ§Ù„Ű„Ű¶Ű§ÙŰ© Ű§Ù„Ù‰ Ű§ŰłÙ… Ù…ŰłŰȘŰźŰŻÙ…, ÙƒÙ„Ù…Ű© "
+"Ù…Ű±ÙˆŰ±, و Ù…ŰŹÙ…ÙˆŰčŰ© Űčمل Ù…Ù†Ű§ŰłŰšŰ©."
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse icmp echo."
msgstr ""
-"ŰŁÙ†ŰȘ ŰȘقوم ŰšŰȘÙ‡ÙŠŰŠŰ© ۷ۧۚŰčŰ© OKI laser winprinter. Ù‡Ű°Ù‡ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ\n"
-"ŰȘŰłŰȘŰźŰŻÙ… ŰšŰ±ÙˆŰȘوكول ۧŰȘŰ”Ű§Ù„Ű§ŰȘ ۟ۧ۔ و Ù„Ű°Ű§ فهي ŰȘŰčمل ÙÙ‚Ű· ŰčÙ†ŰŻÙ…Ű§ ŰȘكون مŰȘŰ”Ù„Ű© ŰšŰ§Ù„Ù…Ù†ÙŰ° "
-"Ű§Ù„Ù…ŰȘÙˆŰ§ŰČي Ű§Ù„ŰŁÙˆÙ„. ŰčÙ†ŰŻÙ…Ű§ ŰȘكون Ű§Ù„Ű·Ű§ŰšŰčŰ© مŰȘŰ”Ù„Ű© ŰšÙ…Ù†ÙŰ° ۹۟۱ ŰŁÙˆ ŰšŰźŰ§ŰŻÙ… ۷ۚۧŰčŰ© فمن ÙŰ¶Ù„Ùƒ "
-"قم ŰšŰȘÙˆŰ”ÙŠÙ„ Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„Ù‰ Ű§Ù„Ù…Ù†ÙŰ° Ű§Ù„Ù…ŰȘÙˆŰ§ŰČي Ű§Ù„ŰŁÙˆÙ„ Ù‚ŰšÙ„ ŰŁÙ† ŰȘŰ·ŰšŰč Ű”ÙŰ­Ű© ۧ۟ŰȘŰšŰ§Ű±ÙŠŰ©. Ű§Ù† لم "
-"ŰȘفŰčل Ű°Ù„Ùƒ فلن ŰȘŰčمل Ű§Ù„Ű·Ű§ŰšŰčŰ©. ۧŰčۯۧۯ نوŰč Ű§Ù„ÙˆŰ”Ù„Ű© ŰłÙŠŰȘم ŰȘŰŹŰ§Ù‡Ù„Ù‡ من Ű§Ù„Ù…ŰŽŰșّل."
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse icmp echo."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "OKI winprinter configuration"
-msgstr "Ű„Űčۯۧۯ OKI WinPrinter"
+msgid "reconfigure"
+msgstr "Ű„Űčۯۧ۩ Ű§Ù„Ű„Űčۯۧۯ"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
-"ۧ۰ۧ لم ŰȘكن ۷ۧۚŰčŰȘ Ù…ÙˆŰŹÙˆŰŻŰ© في Ű§Ù„Ù‚Ű§ŰŠÙ…Ű©, ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ ۷ۧۚŰčŰ© مŰȘÙˆŰ§ÙÙ‚Ű© (Ű§Ù†ŰžŰ± ŰŻÙ„ÙŠÙ„ "
-"Ű§Ù„Ű·Ű§ŰšŰčŰ©) ŰŁÙˆ ۧ۟ŰȘ۱ ۷ۧۚŰčŰ© Ù…Ù…Ű§Ű«Ù„Ű©."
+"يمكن Ù„ŰšŰ·Ű§Ù‚ŰȘك Ű§Ù„ŰȘمŰȘŰč ۚۯŰčم Ù„Ù„Ű±ŰłÙˆÙ… Ű«Ù„Ű§Ű«ÙŠŰ© Ű§Ù„ŰŁŰšŰčۧۯ مŰč XFree %s, \n"
+"Ù„Ű§Ű­Űž ŰŁÙ† Ù‡Ű°Ű§ Ű§Ù„ŰŻŰčم ŰȘŰŹŰ±ÙŠŰšÙŠ و Ù‚ŰŻ يŰȘ۳ۚۚ في Ű§ÙŠÙ‚Ű§Ù ŰŹÙ‡Ű§ŰČك."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
-"\n"
-"\n"
-"ÙŰ¶Ù„Ű§Ù‹ ŰȘŰŁÙƒŰŻ من Ù‚ÙŠŰ§Ù… Printerdrake ŰšŰ§ÙƒŰȘŰŽŰ§Ù ۷۱ۧŰČ Ű·Ű§ŰšŰčŰȘك ŰšŰŽÙƒÙ„ Ű”Ű­ÙŠŰ­. ۧŰč۫۱ Űčلى "
-"Ű§Ù„Ű·Ű±Ű§ŰČ Ű§Ù„Ű”Ű­ÙŠŰ­ ۧ۰ۧ ŰȘم ۧ۟ŰȘÙŠŰ§Ű± ۷۱ۧŰČ ŰźŰ·ŰŁ ŰŁÙˆ \"۷ۧۚŰčŰ© ŰźŰ§Ù…\"."
+msgid "Xinetd Service"
+msgstr "ŰźŰŻÙ…Ű§ŰȘ Xinetd"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which printer model do you have?"
-msgstr "Ù…Ű§ هو نوŰč Ű§Ù„Ű·Ű§ŰšŰčŰ© Ù„ŰŻÙŠÙƒŰŸ"
+msgid "access to network tools"
+msgstr "Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ ŰŁŰŻÙˆŰ§ŰȘ Ű§Ù„ŰŽŰšÙƒŰ©"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer model selection"
-msgstr "Ű„ŰźŰȘÙŠŰ§Ű± ÙˆŰ­ŰŻŰ§ŰȘ Ű§Ù„Ű·Ű§ŰšŰčŰ©"
+msgid "Firmware-Upload for HP LaserJet 1000"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Reading printer database..."
-msgstr "ŰŹŰ§Ű±ÙŠ Ù‚Ű±Ű§ŰĄŰ© Ù‚Ű§ŰčŰŻŰ© ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ..."
+msgid ""
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
+msgstr ""
+"Mandrake Linux 9.1 يمكّنك من ۧ۳ŰȘŰźŰŻŰ§Ù… ۹۟۱ ۧ۔ۯۧ۱ۧŰȘ Ű§Ù„ŰšŰ±Ű§Ù…ŰŹ لŰȘŰŽŰșيل Ű§Ù„Ù…Ù„ÙŰ§ŰȘ "
+"Ű§Ù„Ű”ÙˆŰȘÙŠŰ©, و ŰȘŰ­Ű±ÙŠŰ± Ű§Ù„Ű”ÙˆŰ±, و ŰȘŰŽŰșيل Ù…Ù„ÙŰ§ŰȘ Ű§Ù„ÙÙŠŰŻÙŠÙˆ"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select model manually"
-msgstr "ŰȘم ۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„Ù†Ù‘Ù…ÙˆŰ°ŰŹ ÙŠŰŻÙˆÙŠÙ‘Ù‹Ű§"
+msgid "Here is a list of all auto-detected printers. "
+msgstr "Ù‡Ű§ هي Ù‚Ű§ŰŠÙ…Ű© ŰšÙƒÙ„ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…ŰȘŰ­Ù‚Ù‘ÙŽÙ‚ Ù…Ù†Ù‡Ű§ ŰąÙ„ÙŠŰ§Ù‹. "
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The model is correct"
-msgstr "Ű§Ù„Ű·Ű±Ű§ŰČ Ű”Ű­ÙŠŰ­"
+msgid ""
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
+msgstr ""
+"۟۷ۣ ŰŁŰ«Ù†Ű§ŰĄ ŰȘŰ«ŰšÙŠŰȘ aboot, \n"
+"Ű­Ű§ÙˆÙ„ Ű§Ù„Ű„ŰŹŰšŰ§Ű± Űčلى Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ Ű­ŰȘى و لو ŰŁŰŻÙŠ Ű°Ù„Ùƒ لŰȘŰŻÙ…ÙŠŰ± Ű§Ù„ŰȘŰŹŰČŰŠŰ© Ű§Ù„ŰŁÙˆÙ„Ù‰ŰŸ"
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
+"Options Description:\n"
"\n"
-"For your printer Printerdrake has found:\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
-"%s"
msgstr ""
-"Ù‚Ű§Ù… Printerdrake ŰšÙ…Ù‚Ű§Ű±Ù†Ű© Ű§ŰłÙ… Ű§Ù„Ű·Ű±Ű§ŰČ Ű§Ù„Ù†Ű§ŰȘŰŹ Űčن Ű§Ù„ŰȘŰ­Ù‚Ù‚ Ű§Ù„ŰąÙ„ÙŠ من Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ مŰč "
-"Ű§Ù„Ű·Ű±Ű§ŰČۧŰȘ Ű§Ù„Ù…ÙˆŰŹÙˆŰŻŰ© في Ù‚Ű§ŰčŰŻŰ© ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ù„Ù„Ű­Ű”ÙˆÙ„ Űčلى ŰŁÙŰ¶Ù„ ŰȘÙˆŰ§ÙÙ‚. Ù‡Ű°Ű§ "
-"Ű§Ù„Ű„ŰźŰȘÙŠŰ§Ű± Ù‚ŰŻ يكون ŰźŰ§Ű·ŰŠŰ§Ù‹, ŰźŰ”ÙˆŰ”Ű§Ù‹ ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ű§Ù„Ű·Ű§ŰšŰčŰ© ŰșÙŠŰ± Ù…ÙˆŰŹÙˆŰŻŰ© Ű§Ű·Ù„Ű§Ù‚Ű§Ù‹ في Ù‚Ű§ŰčŰŻŰ© "
-"ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ. Ù„Ű°Ű§ ŰȘŰŁÙƒŰŻ ۧ۰ ÙƒŰ§Ù† ۧ۟ŰȘÙŠŰ§Ű±Ùƒ Ű”Ű­ÙŠŰ­Ű§Ù‹ و Ű§Ù†Ù‚Ű± \"Ű§Ù„Ű·Ű±Ű§ŰČ Ű”Ű­ÙŠŰ­\", ŰŁÙ…Ű§ "
-"Ű§Ù† لم يكن Ű§Ù„Ű·Ű§ŰČ Ű”Ű­ÙŠŰ­Ű§Ù‹, Ű§Ù†Ù‚Ű± \"ۧ۟ŰȘ۱ Ű§Ù„Ű·Ű±Ű§ŰČ ÙŠŰŻÙˆÙŠŰ§Ù‹\" كي يŰȘŰłÙ†Ù‰ لك ۧ۟ŰȘÙŠŰ§Ű± ۷۱ۧŰČ "
-"۷ۧۚŰčŰȘك ÙŠŰŻÙˆÙŠŰ§Ù‹ Űčلى Ű§Ù„ŰŽŰ§ŰŽŰ© Ű§Ù„ŰȘŰ§Ù„ÙŠŰ©.\n"
+"options description:\n"
"\n"
-"Ù„Ű·Ű§ŰšŰčŰȘك ÙˆŰŹŰŻ Printerdrake:\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
-"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Your printer model"
-msgstr "۷۱ۧŰČ Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙƒ"
+msgid ""
+"Restore Selected\n"
+"Files"
+msgstr ""
+"ۧ۳ŰȘŰčŰŻ Ű§Ù„Ù…Ù„ÙŰ§ŰȘ\n"
+"Ű§Ù„Ù…ŰźŰȘۧ۱۩"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Preparing printer database..."
-msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰ­Ű¶ÙŠŰ± Ù‚Ű§ŰčŰŻŰ© ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ..."
+msgid ""
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
+msgstr ""
+"%s Ù…ÙˆŰŹÙˆŰŻ, هل ŰȘŰ±ÙŠŰŻ Ű­Ű°ÙÙ‡ŰŸ\n"
+"\n"
+"ŰȘŰ­Ű°ÙŠŰ±: ۧ۰ۧ قمŰȘ ŰšÙ‡Ű°Ù‡ Ű§Ù„ŰčÙ…Ù„ÙŠŰ© Ù…ŰłŰšÙ‚Ű§Ù‹ ŰșŰ§Ù„ŰšŰ§Ù‹\n"
+" ŰłŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ Ű­Ű°Ù Ű§Ù„Ù…ŰŻŰźÙ„ من authorized_keys Űčلى Ű§Ù„ŰźŰ§ŰŻÙ…."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Location"
-msgstr "Ű§Ù„Ù…ÙƒŰ§Ù†"
+msgid "Please fill or check the field below"
+msgstr "ÙŰ¶Ù„Ű§Ù‹ Ű§Ù…Ù„ŰŁ ŰŁÙˆ ŰŁŰŽÙ‘Ű± Űčلى Ű§Ù„Ű­Ù‚Ù„ ŰŁŰŻÙ†Ű§Ù‡"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Description"
-msgstr "Ű§Ù„ÙˆŰ”Ù"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "هل ŰȘŰ±ÙŠŰŻ Ű­ÙŰž ŰȘŰčŰŻÙŠÙ„Ű§ŰȘ /etc/fstab"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Name of printer"
-msgstr "Ű§ŰłÙ… Ű§Ù„Ű·Ű§ŰšŰčŰ©"
+msgid "Boot Protocol"
+msgstr "ŰšŰ±ÙˆŰȘوكول Ű§Ù„Ű„Ù‚Ù„Ű§Űč"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"كل ۷ۧۚŰčŰ© ŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ Ű§ŰłÙ… (Ù…Ű«Ű§Ù„ \"printer\"). Ű­Ù‚ÙˆÙ„ Ű§Ù„ÙˆŰ”Ù و Ű§Ù„Ù…ÙƒŰ§Ù† Ù„ÙŠŰł من "
-"Ű§Ù„Ű¶Ű±ÙˆŰ±ÙŠ Ù…Ù„Ű€Ù‡Ű§. Ű§Ù†Ù‡Ű§ Ù…ŰŹŰ±ŰŻ Ù…Ù„Ű§Ű­ŰžŰ§ŰȘ Ù„Ù„Ù…ŰłŰȘŰźŰŻÙ…ÙŠÙ†."
+msgid "LVM-disks %s\n"
+msgstr "ŰŁÙ‚Ű±Ű§Ű” LVM %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr "ŰŁŰŻŰźÙ„ Ű§ŰłÙ… Ű§Ù„Ű·Ű§ŰšŰčŰ© و Ű§Ù„ŰȘŰčÙ„ÙŠÙ‚Ű§ŰȘ"
+msgid "The package %s is needed. Install it?"
+msgstr "Ű§Ù„Ű­ŰČÙ…Ű© %s ÙŠŰŹŰš ŰŁÙ† ŰȘÙŰ«ŰšÙ‘ŰȘ. هل ŰȘŰ±ÙŠŰŻ ŰȘŰ«ŰšÙŠŰȘÙ‡Ű§ŰŸ"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr "ŰŹŰ§Ű±ÙŠ ŰŹŰčل Ù…Ù†ÙŰ° Ű§Ù„Ű·Ű§ŰšŰčŰ© مŰȘÙˆÙŰ±Ű§Ù‹ لـCUPS..."
+msgid "On boot"
+msgstr "ŰčÙ†ŰŻ Ű§Ù„Ű„Ù‚Ù„Ű§Űč"
-#: ../../printer/printerdrake.pm:1
+# U+200F (RTL mark) has been inserted after "Bus" so the display
+# on screen is correctly "datadatadata :Bus xxxxxxxx" (with xxxx arabic),
+# and not "Bus: datadatadata xxxxxxxx"
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Checking device and configuring HPOJ..."
-msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰȘŰŁÙƒŰŻ من Ű§Ù„ŰŹÙ‡Ű§ŰČ Ùˆ ŰȘÙ‡ÙŠŰŠŰ© HPOJ..."
+msgid "Bus identification"
+msgstr "مŰčŰ±Ù Ű§Ù„Ù€ Bus‏"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr "Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű°Ű§ÙƒŰ±Ű© Űčلى ŰŹÙ‡Ű§ŰČ HP مŰȘŰčŰŻŰŻ Ű§Ù„ÙˆŰžŰ§ŰŠÙ"
+msgid "Please make a backup of your data first"
+msgstr "۱ۏۧۥ قم ŰšŰčمل Ù†ŰłŰźŰ© ۭۧŰȘÙŠŰ§Ű·ÙŠŰ© من ŰšÙŠŰ§Ù†Ű§ŰȘك ŰŁÙˆÙ„Ű§"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„Ù…ŰłŰ­ Űčلى ŰŹÙ‡Ű§ŰČ HP مŰȘŰčŰŻŰŻ Ű§Ù„ÙˆŰžŰ§ŰŠÙ"
+msgid "Vatican"
+msgstr "Ű§Ù„ÙŰ§ŰȘÙŠÙƒŰ§Ù†"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Installing mtools packages..."
-msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰ«ŰšÙŠŰȘ Ű­ŰČم mtools"
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr "Ù„ŰŻÙŠÙƒ ŰŁÙƒŰ«Ű± من Ù‚Ű±Ű” Ű”Ù„Űš, في ŰŁÙŠÙ‡Ù… ŰȘŰ±ÙŠŰŻ ŰȘŰ«ŰšÙŠŰȘ Ù„ÙŠÙ†ÙƒŰłŰŸ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Installing SANE packages..."
-msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰ«ŰšÙŠŰȘ Ű­ŰČم SANE..."
+msgid "Boot ISO"
+msgstr "ملف ISO Ű§Ù„Ű„Ù‚Ù„Ű§Űč"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installing HPOJ package..."
-msgstr "ŰŹŰ§Ű±ÙŠ ŰȘÙ‡ÙŠŰŠŰ© Ű­ŰČÙ…Ű© HPOJ..."
+msgid "Eritrea"
+msgstr "Ű§Ű±ÙŠŰȘŰ±ÙŠŰ§"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
-"ۧ۰ۧ ÙƒŰ§Ù†ŰȘ ۷ۧۚŰčŰȘك ŰŹÙ‡Ű§ŰČŰ§Ù‹ مŰȘŰčŰŻŰŻ Ű§Ù„ÙˆŰžŰ§ŰŠÙ من HP ŰŁÙˆ Sony (OfficeJet, PSC, LaserJet "
-"1100/1200/1220/3200/3300 مŰč Ù…Ű§ŰłŰ­ Ű¶ÙˆŰŠÙŠ, Sony IPJ-V100) ŰŁÙˆ ŰŹÙ‡Ű§ŰČ HP PhotoSmart "
-"ŰŁÙˆ HP LaserJet 2200?"
+msgid "Remove List"
+msgstr "Ű§Ű­Ű°Ù Ű§Ù„Ù‚Ű§ŰŠÙ…Ű©"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
-msgid "A command line must be entered!"
-msgstr "ÙŠŰŹŰš Ű§ŰŻŰźŰ§Ù„ ۳۷۱ ŰŁÙˆŰ§Ù…Ű±"
+msgid "A customizable environment"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Command line"
-msgstr "۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű±"
+msgid "Inuktitut"
+msgstr "Ű§ÙŠÙ†ÙˆÙƒŰȘيŰȘوŰȘ"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
-"Ù‡Ù†Ű§ يمكنك ŰȘŰ­ŰŻÙŠŰŻ ŰŁÙŠ ŰŁÙ…Ű± Ù‡Ù„Ű§Ù…ÙŠ يمكن ŰȘŰ­ÙˆÙŠÙ„ ÙˆŰžÙŠÙŰ© Ű§Ù„Ű·ŰšŰ§ŰčŰ© Ű§Ù„ÙŠÙ‡ ŰšŰŻÙ„Ű§Ù‹ من Ű§Ű±ŰłŰ§Ù„Ù‡Ű§ "
-"Ù…ŰšŰ§ŰŽŰ±Ű©Ù‹ Ű§Ù„Ù‰ Ű§Ù„Ű·Ű§ŰšŰčŰ©."
+msgid "Morocco"
+msgstr "Ű§Ù„Ù…Űș۱ۚ"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pipe into command"
-msgstr "Ű­ÙˆÙ„ Ű§Ù„Ù‰ Ű§Ù„ŰŁÙ…Ű±"
+msgid "Which printer model do you have?"
+msgstr "Ù…Ű§ هو نوŰč Ű§Ù„Ű·Ű§ŰšŰčŰ© Ù„ŰŻÙŠÙƒŰŸ"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detected model: %s %s"
-msgstr "ŰȘم Ű§ÙƒŰȘŰŽŰ§Ù Ű§Ù„Ű·Ű±Ű§ŰČ: %s %s"
+msgid "Add a new printer"
+msgstr "ŰŁŰ¶Ù ۷ۧۚŰčŰ© ŰŹŰŻÙŠŰŻŰ©"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A valid URI must be entered!"
-msgstr "ÙŠŰŹŰš Ű§ŰŻŰźŰ§Ù„ URI Ű”Ű§Ù„Ű­!"
+msgid " All of your selected data have been "
+msgstr " كل Ű§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„Ù…ŰźŰȘۧ۱۩ ŰȘم "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Printer Device URI"
-msgstr "URI ŰŹÙ‡Ű§ŰČ Ű§Ù„Ű·Ű§ŰšŰčŰ©"
+msgid "<-- Delete"
+msgstr "<-- Ű­Ű°Ù"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"يمكنك ŰȘŰ­ŰŻÙŠŰŻ Ű§Ù„Ù€URI Ù…ŰšŰ§ŰŽŰ±Ű© Ù„Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ Ű§Ù„Ű·Ű§ŰšŰčŰ©. Ű§Ù„Ù€URI ÙŠŰŹŰš ŰŁÙ† يŰȘÙˆŰ§ÙÙ‚ مŰč "
-"مŰȘŰ·Ù„ŰšŰ§ŰȘ CUPS ŰŁÙˆ Foomatic. Ù„Ű§Ű­Ű· ŰŁÙ†Ù‡ Ù„ÙŠŰłŰȘ كل ŰŁÙ†ÙˆŰ§Űč Ű§Ù„Ù€URI Ù…ŰŻŰčÙˆÙ…Ű© من "
-"Ű§Ù„Ù€spoolers."
+msgid "Nepal"
+msgstr "Ù†ÙŠŰšŰ§Ù„"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Port"
-msgstr "Ű§Ù„ŰšÙˆŰ§ŰšŰ©"
+msgid "cpu # "
+msgstr "cpu # "
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printer host name or IP"
-msgstr "Ű§ŰłÙ… Ù…ŰłŰȘŰ¶ÙŠÙ Ű§Ù„Ű·Ű§ŰšŰčŰ© ŰŁÙˆ Ű§Ù„Ù€ IP"
+msgid "chunk size"
+msgstr "Ű­ŰŹÙ… chunk"
-#: ../../printer/printerdrake.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "The port number should be an integer!"
-msgstr "ÙŠŰŹŰš ŰŁÙ† يكون Ű±Ù‚Ù… Ű§Ù„Ù…Ù†ÙŰ° Ű±Ù‚Ù…Ű§Ù‹ Ű”Ű­ÙŠŰ­Ű§Ù‹!"
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "commands before booting, or 'c' for a command-line."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Ű§ŰłÙ… Ù…ŰłŰȘŰ¶ÙŠÙ Ű§Ù„Ű·Ű§ŰšŰčŰ© ŰŁÙˆ Ű§Ù„Ù€ IP Ù…ÙÙ‚ÙˆŰŻ!"
+msgid "Problems installing package %s"
+msgstr "ÙƒŰ§Ù†ŰȘ Ù‡Ù†Ű§Ùƒ Ù…ŰŽŰ§ÙƒÙ„ في ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ű­ŰČÙ…Ű© %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"Ù„Ù„Ű·ŰšŰ§ŰčŰ© Ű§Ù„Ù‰ ۷ۧۚŰčŰ© TCP ŰŁÙˆ socket, ÙŠŰŹŰš Űčليك ۧŰč۷ۧۥ Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ ŰŁÙˆ ŰčÙ†ÙˆŰ§Ù† IP "
-"Ű§Ù„ŰźŰ§Ű” ŰšŰ§Ù„Ű·Ű§ŰšŰčŰ© و ۧ۟ŰȘÙŠŰ§Ű±ÙŠŰ§Ù‹ يمكنك Ű§Ű¶Ű§ÙŰ© Ű±Ù‚Ù… Ù…Ù†ÙŰ° Ű§Ù„Ű·Ű§ŰšŰčŰ© (Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠ هو 9100). "
-"Űčلى ŰźŰ§ŰŻÙ…Ű§ŰȘ HP JetDirect يكون Ű±Ù‚Ù… Ű§Ù„Ù…Ù†ÙŰ° ŰčŰ§ŰŻŰ©Ù‹ هو 9100, Űčلى Ű§Ù„ŰźŰ§ŰŻÙ…Ű§ŰȘ Ű§Ù„ŰŁŰźŰ±Ù‰ "
-"يمكن ŰŁÙ† يكون Ű§Ù„Ű±Ù‚Ù… ŰșÙŠŰ± Ű°Ù„Ùƒ. Ű§Ù„Ù‚ Ù†ŰžŰ±Ű© Űčلى ŰŻÙ„ÙŠÙ„ Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… للŰčŰȘۧۯ Ű§Ù„ŰźŰ§Ű” ŰšÙƒ."
+msgid "You will receive an alert if the load is higher than this value"
+msgstr "ŰłÙˆÙ ŰȘŰłŰȘلم ŰȘÙ†ŰšÙŠÙ‡Ű§ ۧ۰ۧ ÙƒŰ§Ù† Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„ ŰŁŰčلى من Ù‡Ű°Ù‡ Ű§Ù„Ù‚ÙŠÙ…Ű©"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
msgstr ""
-"ۧ۟ŰȘ۱ ÙˆŰ§Ű­ŰŻŰ© من Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„ŰȘي ŰȘم Ű§Ù„ŰȘŰ­Ù‚Ù‚ Ù…Ù†Ù‡Ű§ ŰąÙ„ÙŠŰ§Ù‹ من Ű§Ù„Ù‚Ű§ŰŠÙ…Ű© ŰŁÙˆ ŰŁŰŻŰźÙ„ Ű§ŰłÙ… "
-"Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ ŰŁÙˆ Ű±Ù‚Ù… IP و Ű±Ù‚Ù… Ű§Ù„Ù…Ù†ÙŰ° Ű§Ù„Ű„ŰźŰȘÙŠŰ§Ű±ÙŠ (Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠ هو 9100) في Ű­Ù‚ÙˆÙ„ "
-"Ű§Ù„Ű„ŰŻŰźŰ§Ù„."
+"\n"
+"\n"
+"لŰȘŰłÙ„ÙŠÙ… ŰȘÙ‚Ű±ÙŠŰ± Ű§Ù„ŰčÙŠÙˆŰš, ۧ۶ŰșŰ· Űčلى ŰČ۱ ŰȘÙ‚Ű±ÙŠŰ±.\n"
+"ŰłÙŠÙ‚ÙˆÙ… Ù‡Ű°Ű§ ŰšÙ‚ŰȘŰ­ مŰȘŰ”ÙŰ­ ÙˆÙŠŰš Űčلى Ű§Ù„Ű”ÙŰ­Ű© https://drakbug.mandrakesoft.com\n"
+" Ű­ÙŠŰ« ŰłŰȘŰŹŰŻ ۧ۳ŰȘÙ…Ű§Ű±Ű© Űčليك Ù…Ù„Ű€Ù‡Ű§. Ű§Ù„Ù…ŰčÙ„ÙˆÙ…Ű§ŰȘ Ű§Ù„Ù…Ű°ÙƒŰ±Ű© ŰŁŰčÙ„Ű§Ù‡ ŰłÙŠŰȘم Ù†Ù‚Ù„Ù‡Ű§\n"
+"Ű§Ù„Ù‰ Ű°Ù„Ùƒ Ű§Ù„ŰźŰ§ŰŻÙ…\n"
+"\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "ŰźÙŠŰ§Ű±Ű§ŰȘ ۷ۧۚŰčŰ© TCP/Socket"
+msgid "Add a scanner manually"
+msgstr "ŰŁŰ¶Ù Ù…Ű§ŰłŰ­ Ű¶ÙˆŰŠÙŠ ÙŠŰŻÙˆÙŠŰ§Ù‹"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Host \"%s\", port %s"
-msgstr "Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ \"%s\", Ű§Ù„Ù…Ù†ÙŰ° %s"
+msgid "Reload partition table"
+msgstr "Ű„Űčۧۯ۩ ŰȘŰ­Ù…ÙŠÙ„ ŰŹŰŻÙˆÙ„ Ű§Ù„ŰȘÙ‚ŰłÙŠÙ…"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ \"%s\", Ű§Ù„Ù…Ù†ÙŰ° %s"
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr "نŰčم, ŰŁŰ±ÙŠŰŻ ŰŻŰźÙˆÙ„Ű§ ŰąÙ„ÙŠŰ§ مŰč Ù‡Ű°Ű§ )Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…, ۳۷ۭ Ű§Ù„Ù…ÙƒŰȘŰš("
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Scanning network..."
-msgstr "ŰŹŰ§Ű±ÙŠ Ù…ŰłŰ­ Ű§Ù„ŰŽŰšÙƒŰ©..."
+msgid "Search for fonts in installed list"
+msgstr "ۭۧۚ۫ Űčن Ű§Ù„ŰźŰ·ÙˆŰ· في Ű§Ù„Ù‚Ű§ŰŠÙ…Ű© Ű§Ù„Ù…Ű«ŰšŰȘŰ©"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Printer auto-detection"
-msgstr "ŰȘŰ­Ù‚Ù‚ ŰąÙ„ÙŠ من Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ"
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr "Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ© لم ŰȘنŰȘه ŰšÙ€`0', ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰźŰ±ÙˆŰŹ."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "NCP queue name missing!"
-msgstr "Ű§ŰłÙ… Ű”Ù NCP Ù…ÙÙ‚ÙˆŰŻ!"
+msgid "Boot"
+msgstr "Ű§Ù„Ű„Ù‚Ù„Ű§Űč"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "NCP server name missing!"
-msgstr "Ű§ŰłÙ… ŰźŰ§ŰŻÙ… NCP Ù…ÙÙ‚ÙˆŰŻ!"
+msgid "Tuner type:"
+msgstr "نوŰč Ű§Ù„ŰȘÙˆÙ†Ű±:"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Print Queue Name"
-msgstr "Ű§ŰłÙ… Ű”Ù Ű§Ù„Ű·Ű§ŰšŰčŰ©"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
+msgstr ""
+"ۧ?ن, Ű­Ű§Ù† وقŰȘ ۧ۟ŰȘÙŠŰ§Ű± Ù†ŰžŰ§Ù… Ű§Ù„Ű·ŰšŰ§ŰčŰ© Ù„Ù†ŰžŰ§Ù…Ùƒ. ŰȘÙˆÙŰ± ŰŁÙ†ŰžÙ…Ű© Ű§Ù„ŰȘŰŽŰșيل ۧ?ŰźŰ±Ù‰\n"
+"Ù†ŰžŰ§Ù… ۷ۚۧŰčŰ© ÙˆŰ§Ű­ŰŻ, لكن Mandrake Linux ÙŠÙˆÙŰ± لك Ù†ŰžŰ§Ù…ÙŠÙ†. كل Ù†ŰžŰ§Ù… Ù…Ù†Ű§ŰłŰš\n"
+"لنوŰș مŰčين من Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ©.\n"
+"\n"
+" * \"%s\"--و هو ۧ۟ŰȘ۔ۧ۱ لـ``print, don't queue'' ŰŁÙŠ ``ۧ۷ۚŰč و ? ŰȘŰ”Ù'', Ù‡Ű°Ű§ هو "
+"Ű§Ù„ŰźÙŠŰ§Ű± ۧ?Ù…Ű«Ù„\n"
+"ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ù„ŰŻÙŠÙƒ ÙˆŰ”Ù„Ű© Ù…ŰšŰ§ŰŽŰ±Ű© ŰšŰ§Ù„Ű·Ű§ŰšŰčŰ©, و ŰȘŰ±ÙŠŰŻ ŰȘÙŰ§ŰŻÙŠ ŰŁÙŠ ۧ۱ŰȘŰšŰ§Ùƒ في Ű§Ù„Ű·Ű§ŰšŰčŰ©\n"
+"و Ù„ŰŻÙŠÙƒ ۷ۧۚŰčۧŰȘ Űčلى Ű§Ù„ŰŽŰšÙƒŰ©.(يقوم \"pdq\" ŰšŰ§Ù„ŰȘŰčŰ§Ù…Ù„ مŰč ۭۧ?ŰȘ Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„ŰšŰłÙŠŰ·Ű©\n"
+"و يŰčÙŠŰšÙ‡ Ű§Ù„ŰšŰ·ŰŠ ŰčÙ†ŰŻ ۧ?ŰłŰȘŰźŰŻŰ§Ù… مŰč Ű§Ù„ŰŽŰšÙƒŰ§ŰȘ). من ۧ?ÙŰ¶Ù„ ŰŁÙ† ŰȘŰłŰȘŰźŰŻÙ… \"pdq\" ۧ۰ۧ.\n"
+"ÙƒŰ§Ù†ŰȘ Ù‡Ű°Ù‡ ŰȘۏ۱ۚŰȘك ۧ?ولى مŰč Ù†ŰžŰ§Ù… Ù„ÙŠÙ†ÙƒŰł.\n"
+"\n"
+" * \"%s\" - ``Common UNIX Printing System'', هو Ű§Ù„ŰźÙŠŰ§Ű± ۧ?Ù…Ű«Ù„\n"
+"Ù„Ù„Ű·ŰšŰ§ŰčŰ© Űčلى ۷ۧۚŰčŰȘك Ű§Ù„Ù…Ű­Ù„ÙŠŰ© ŰŁÙˆ Ű­ŰȘى Űčلى ۷ۧۚŰčŰ© في Ű§Ù„Ù†Ű”Ù ۧ?۟۱ من Ű§Ù„ÙƒÙˆÙƒŰš. Ű§Ù†Ù‡\n"
+"ŰłÙ‡Ù„ ۧ?Űčۯۧۯ و يمكن ŰŁÙ† يŰȘŰ”Ű±Ù ÙƒŰźŰ§ŰŻÙ… ŰŁÙˆ كŰčميل ?Ù†ŰžÙ…Ű© ۷ۚۧŰčŰ© \"lpd\"\n"
+"Ű§Ù„Ù‚ŰŻÙŠÙ…Ű©, Ù„Ű°Ű§ ÙŰ„Ù†Ù‡ مŰȘÙˆŰ§ÙÙ‚ مŰč ŰŁÙ†ŰžÙ…Ű© Ű§Ù„ŰȘŰŽŰșيل Ű§Ù„Ù‚ŰŻÙŠÙ…Ű©\n"
+"Ű§Ù„ŰȘي ? ŰȘŰČŰ§Ù„ ŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ ŰźŰŻÙ…Ű§ŰȘ Ű§Ù„Ű·ŰšŰ§ŰčŰ©.ŰšÙŠÙ†Ù…Ű§ Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ© ŰłÙ‡Ù„Ű©\n"
+"و Ù‚ÙˆÙŠŰ© Ù…Ű«Ù„ \"pdq\". ۧ۰ۧ كنŰȘ ŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ Ù…Ű­Ű§ÙƒŰ§Ű© ŰźŰ§ŰŻÙ… \"lpd\", ŰȘŰŁÙƒŰŻ\n"
+"من ŰȘŰŽŰșيل Ù…Ű±Ű§Ù‚Űš \"cups-lpd\". ÙŠŰ­ŰȘوي %s Űčلى ÙˆŰ§ŰŹÙ‡Ű§ŰȘ\n"
+"Ű±ŰłÙˆÙ…ÙŠŰ© Ù„Ù„Ű·ŰšŰ§ŰčŰ© ŰŁÙˆ ۧ۟ŰȘÙŠŰ§Ű± ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„Ű·Ű§ŰšŰčŰ© و ۄۯۧ۱۩\n"
+"Ű§Ù„Ű·Ű§ŰšŰčŰ©.\n"
+"\n"
+"ۧ۰ۧ قمŰȘ يŰȘÙ‚Ű±ÙŠŰ± ۧ۟ŰȘÙŠŰ§Ű±Ùƒ ۧ?ن, Ű«Ù… لم يŰčŰŹŰšÙƒ Ù†ŰžŰ§Ù… Ű§Ù„Ű·ŰšŰ§ŰčŰ©\n"
+"ÙÙŠÙ…Ű§ ŰšŰčŰŻ, يمكنك ŰȘŰșÙŠÙŠŰ±Ù‡ Űčن Ű·Ű±ÙŠÙ‚ ŰȘŰŽŰșيل PrinterDrake من Ù…Ű±ÙƒŰČ ŰȘŰ­ÙƒÙ… Mandrake\n"
+"و Ű§Ù„Ù†Ù‚Ű± Űčلى ŰČ۱ Ű§Ù„ŰźŰšÙŠŰ±."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Printer Server"
-msgstr "ŰźŰ§ŰŻÙ… Ű§Ù„Ű·Ű§ŰšŰčŰ©"
+msgid "\"Menu\" key"
+msgstr "مفŰȘۭۧ \"Menu\""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
msgstr ""
-"Ù„Ù„Ű·ŰšŰ§ŰčŰ© Űčلى ۷ۧۚŰčŰ© NetWare, ŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ ۧŰč۷ۧۥ Ű§ŰłÙ… ŰźŰ§ŰŻÙ… ۷ۚۧŰčŰ© NetWare (Ù„Ű§Ű­Ű· ŰŁÙ†Ù‡ "
-"Ù‚ŰŻ ÙŠŰźŰȘلف Űčن Ű§ŰłÙ… Ù…ŰłŰȘŰ¶ÙŠÙ TCP/IP!) ŰšŰ§Ù„Ű„Ű¶Ű§ÙŰ© Ű§Ù„Ù‰ Ű§ŰłÙ… Ű§Ù„Ű”Ù Ù„Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„ŰȘي ۱ŰșŰš في "
-"Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„ÙŠÙ‡Ű§ ŰšŰ§Ù„Ű„Ű¶Ű§ÙŰ© Ű§Ù„Ù‰ Ű§ŰłÙ… Ù…ŰłŰȘŰźŰŻÙ… و ÙƒÙ„Ù…Ű© Ù…Ű±ÙˆŰ± Ù…Ù†Ű§ŰłŰšŰȘين."
+"\n"
+"\n"
+"ÙŰ¶Ù„Ű§Ù‹ ŰȘŰŁÙƒŰŻ من Ù‚ÙŠŰ§Ù… Printerdrake ŰšŰ§ÙƒŰȘŰŽŰ§Ù ۷۱ۧŰČ Ű·Ű§ŰšŰčŰȘك ŰšŰŽÙƒÙ„ Ű”Ű­ÙŠŰ­. ۧŰč۫۱ Űčلى "
+"Ű§Ù„Ű·Ű±Ű§ŰČ Ű§Ù„Ű”Ű­ÙŠŰ­ ۧ۰ۧ ŰȘم ۧ۟ŰȘÙŠŰ§Ű± ۷۱ۧŰČ ŰźŰ·ŰŁ ŰŁÙˆ \"۷ۧۚŰčŰ© ŰźŰ§Ù…\"."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "NetWare Printer Options"
-msgstr "ŰźÙŠŰ§Ű±Ű§ŰȘ ۷ۧۚŰčŰ© NetWare"
+msgid "Security Administrator:"
+msgstr "Ù…ŰŻÙŠŰ± Ű§Ù„ŰŁÙ…Ù†:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please enter your login"
+msgstr "۱ۏۧۥ ŰŁŰŻŰźÙ„ Ű§ŰłÙ… Ű§Ù„ŰŻŰźÙˆÙ„"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check permissions of files in the users' home."
+msgstr "if set to yes, check permissions of files in the users' home."
+
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
msgstr ""
-"ÙˆŰ”Ù‘Ù„ Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„Ù‰ ŰźŰ§ŰŻÙ… Ù„ÙŠÙ†ÙƒŰł و ۧۏŰčل Ù…Ű§ÙƒÙŠÙ†Ű§ŰȘ Windows ŰȘŰȘŰ”Ù„ ŰšÙ‡ كŰčÙ…Ù„Ű§ŰĄ.\n"
-"\n"
-"هل ŰȘŰ±ÙŠŰŻ فŰčÙ„Ű§Ù‹ مŰȘۧۚŰčŰ© ۧŰčۯۧۯ Ù‡Ű°Ù‡ Ű§Ù„Ű·Ű§ŰšŰčŰ© ÙƒÙ…Ű§ ŰȘفŰčل Ű§Ù„ŰąÙ†ŰŸ"
+"Ù„ÙŠŰłŰȘ Ù„ŰŻÙŠÙƒ ŰŁÙŠ ۧŰȘŰ”Ű§Ù„Ű§ŰȘ Ű„Ù†ŰȘŰ±Ù†ŰȘ.\n"
+"قم ŰšŰčمل ۧŰȘŰ”Ű§Ù„ ŰŁÙˆÙ„Ű§ ۚۧ۳ŰȘŰźŰŻŰ§Ù… 'ŰȘÙ‡ÙŠŰŠŰ©'"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Fonts copy"
+msgstr "نقل Ű§Ù„ŰźŰ·ÙˆŰ·"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Automated"
+msgstr "ŰąÙ„ÙŠ"
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Do you want to test the configuration?"
+msgstr "هل ŰȘŰ±ÙŠŰŻ ŰȘۏ۱ۚ۩ Ű§Ù„Ű„Űčۯۧۯ۟"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"قم ۚۄŰčۯۧۯ ŰźŰ§ŰŻÙ… Windows Ù„ŰŹŰčل Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ مŰȘÙˆÙŰ±Ű© ŰȘŰ­ŰȘ ŰšŰ±ÙˆŰȘوكول IPP و قم ۚۄŰčۯۧۯ "
-"Ű§Ù„Ű·ŰšŰ§ŰčŰ© من Ù‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű© ۚۧ۳ŰȘŰźŰŻŰ§Ù… نوŰč Ű§Ù„ÙˆŰ”Ù„Ű© \"%s\" في Printerdrake.\n"
-"\n"
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
+msgstr "ŰȘم Ű­Ű°Ù Ű§Ù„Ű·Ű§ŰšŰčŰ© \"%s\" من Star Office/OpenOffice.org/GIMP ŰšÙ†ŰŹŰ§Ű­."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+" to the Internet as a client.\n"
"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
+"High: There are already some restrictions, and more automatic checks "
+"are run every night.\n"
"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
+"Higher: The security is now high enough to use the system as a server "
+"which can accept\n"
+" connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+" should choose a lower level.\n"
"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
+"Paranoid: This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+" features are at their maximum\n"
"\n"
+"Security Administrator:\n"
+" If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+" email)"
msgstr ""
-"ŰŁÙ†ŰȘ Űčلى ÙˆŰŽÙƒ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Ű·ŰšŰ§ŰčŰ© Űčلى ۭ۳ۧۚ في Windows مŰč ÙƒÙ„Ù…Ű© Ù…Ű±ÙˆŰ±. ۚ۳ۚۚ ۟۷ۣ في "
-"Ù‡ÙŠÙƒÙ„ÙŠŰ© Űčميل Samba, يŰȘم ÙˆŰ¶Űč ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ± ŰšÙ†Ű” ÙˆŰ§Ű¶Ű­ في ۳۷۱ ŰŁÙˆŰ§Ù…Ű± Űčميل Samba "
-"Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… لنقل ÙˆŰžÙŠÙŰ© Ű§Ù„Ű·ŰšŰ§ŰčŰ© Ű§Ù„Ù‰ ŰźŰ§ŰŻÙ… Windows. Ù„Ű°Ű§ ÙŰ„Ù†Ù‡ يمكن لكل Ù…ŰłŰȘŰźŰŻÙ… Űčلى "
-"Ù‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű© ŰŁÙ† يŰč۱۶ ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ± Űčلى Ű§Ù„ŰŽŰ§ŰŽŰ© ۚۧ۳ŰȘŰźŰŻŰ§Ù… ÙƒÙ„Ù…Ű§ŰȘ Ù…Ű±ÙˆŰ± Ù…Ű«Ù„ \"ps "
-"auxwww\".\n"
+"Ù‚ÙŠŰ§ŰłÙŠ: Ù‡Ű°Ű§ هو Ű§Ù„Ù…ŰłŰȘوى Ű§Ù„Ù‚ÙŠŰ§ŰłÙŠ Ű§Ù„Ù…Ù†Ű”ÙˆŰ­ ŰšÙ‡ Ù„ÙƒÙ…ŰšÙŠÙˆŰȘ۱ يقوم ŰšŰ§Ù„Ű„ŰȘŰ”Ű§Ù„\n"
+" ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ كŰčميل.\n"
"\n"
-"Ù†Ű­Ù† Ù†Ù†Ű”Ű­ ۚۧ۳ŰȘŰčÙ…Ű§Ù„ ÙˆŰ§Ű­ŰŻ من Ű§Ù„ŰšŰŻŰ§ŰŠÙ„ Ű§Ù„ŰȘŰ§Ù„ÙŠŰ© (في كل Ű§Ù„Ű­Ű§?ŰȘ Űčليك Ű§Ù„ŰȘŰŁÙƒŰŻ ŰŁÙ† "
-"Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű§ŰȘ Ű§Ù„Ù…ÙˆŰŹÙˆŰŻŰ© ÙÙ‚Ű· Űčلى Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ© ŰȘŰłŰȘŰ·ÙŠŰč Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ ŰźŰ§ŰŻÙ… Windows, Űčن "
-"Ű·Ű±ÙŠÙ‚ ۧ۳ŰȘŰźŰŻŰ§Ù… ۏۯۧ۱ Ù†Ű§Ű±ÙŠ Ù…Ű«Ù„Ű§Ù‹):\n"
+"Ù…Ű±ŰȘفŰč: ŰȘÙˆŰŹŰŻ ŰšŰč۶ Ű§Ù„Ù‚ÙŠÙˆŰŻ Ù…ŰłŰšÙ‚Ű§Ù‹, و ŰšŰč۶ Ű§Ù„Ű„ŰźŰȘۚۧ۱ۧŰȘ يŰȘم ŰȘŰŽŰșÙŠÙ„Ù‡Ű§ ŰąÙ„ÙŠŰ§Ù‹ ŰčÙ†ŰŻ كل "
+"Ù„ÙŠÙ„Ű©.\n"
"\n"
-"ۧ۳ŰȘŰźŰŻÙ… ۭ۳ۧۚ ŰŻÙˆÙ† ÙƒÙ„Ù…Ű© Ù…Ű±ÙˆŰ± Űčلى ŰźŰ§ŰŻÙ… Windows, Ù…Ű«Ù„ ۭ۳ۧۚ \"GUEST\" ŰŁÙˆ ۭ۳ۧۚ ۟ۧ۔ "
-"Ù„Ű§ŰłŰȘŰźŰŻŰ§Ù…Ù‡ Ù„Ù„Ű·ŰšŰ§ŰčŰ©. ? ŰȘقم ۚۄŰČŰ§Ù„Ű© Ű§Ù„Ű­Ù…Ű§ÙŠŰ© Űčن Ű·Ű±ÙŠÙ‚ ÙƒÙ„Ù…Ű§ŰȘ Ű§Ù„Ù…Ű±ÙˆŰ± من Ű­ŰłŰ§ŰšÙƒ Ű§Ù„ŰŽŰźŰ”ÙŠ "
-"ŰŁÙˆ من ۭ۳ۧۚ Ù…ŰŻÙŠŰ± Ű§Ù„Ù†ŰžŰ§Ù….\n"
+"Ù…Ű±ŰȘقŰč ŰŁÙƒŰ«Ű±: Ű§Ù„Ù…ŰłŰȘوى Ű§Ù„ŰŁÙ…Ù†ÙŠ ŰčŰ§Ù„Ù ŰšŰŽÙƒÙ„ ÙƒŰ§ÙÙ Ù„Ű§ŰłŰȘŰźŰŻŰ§Ù… Ű§Ù„Ù†ŰžŰ§Ù… ÙƒŰźŰ§ŰŻÙ… ÙŠŰłŰȘŰ·ÙŠŰč ŰŁÙ† "
+"ÙŠÙ‚ŰšÙ„\n"
+" Ű§Ù„Ű„ŰȘŰ”Ű§Ù„Ű§ŰȘ من ŰčÙ…Ù„Ű§ŰĄ ÙƒŰ«ÙŠŰ±ÙŠÙ†. ۧ۰ۧ ÙƒŰ§Ù† Ű­Ű§ŰłŰšÙƒ Ù…ŰŹŰ±ŰŻ Űčميل Űčلى "
+"Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ\n"
+"\t ÙÙŠŰŹŰš Űčليك ۧ۟ŰȘÙŠŰ§Ű± Ù…ŰłŰȘوى ŰŁÙ‚Ù„.\n"
"\n"
-"قم ۚۄŰčۯۧۯ ŰźŰ§ŰŻÙ… Windows Ù„ŰŹŰčل Ű§Ù„Ű·Ű§ŰšŰčŰ© مŰȘÙˆÙŰ±Ű© ŰȘŰ­ŰȘ ŰšŰ±ÙˆŰȘوكول LPD. Ű«Ù… قم ۚۄŰčۯۧۯ "
-"Ű§Ù„Ű·ŰšŰ§ŰčŰ© من Ù‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű© مŰč نوŰč Ű§Ù„ÙˆŰ”Ù„Ű© \"%s\" في PrinterDrake.\n"
+"Ù…Ű±ŰȘقŰč ŰŹŰŻŰ§Ù‹: Ù‡Ű°Ű§ ÙŠÙ…Ű§Ű«Ù„ Ű§Ù„Ù…ŰłŰȘوى Ű§Ù„ŰłŰ§ŰšÙ‚, لكن Ű§Ù„Ù†ŰžŰ§Ù… في Ù‡Ű°Ù‡ Ű§Ù„Ű­Ű§Ù„ يكون مŰșÙ„Ù‚Ű§Ù‹ و "
+"Ű§Ù„Ù…ŰČŰ§ÙŠŰ§\n"
+" Ű§Ù„ŰŁÙ…Ù†ÙŠŰ© ŰȘكون Űčلى ŰŁÙ‚Ű”Ù‰ Ű­ŰŻ\n"
"\n"
+"Ù…ŰŻÙŠŰ± Ű§Ù„ŰŁÙ…Ù†:\n"
+" ۧ۰ۧ ÙƒŰ§Ù† ŰźÙŠŰ§Ű± 'Ű§Ù„ŰȘÙ†ŰšÙŠÙ‡Ű§ŰȘ Ű§Ù„ŰŁÙ…Ù†ÙŠŰ©' Ù…ŰźŰȘŰ§Ű±Ű§Ù‹, ÙŰłÙŠŰȘم Ű§Ű±ŰłŰ§Ù„ ŰȘÙ†ŰšÙŠÙ‡Ű§ŰȘ "
+"ŰŁÙ…Ù†ÙŠŰ© Ű§Ù„Ù‰ Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… (ŰšŰ„ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…\n"
+"\t ŰŁÙˆ Ű§Ù„ŰšŰ±ÙŠŰŻ Ű§Ù„ŰŁÙ„ÙƒŰȘŰ±ÙˆÙ†ÙŠ)"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "SECURITY WARNING!"
-msgstr "ŰȘŰ­Ű°ÙŠŰ± ŰŁÙ…Ù†ÙŠ!"
+msgid "Save packages selection"
+msgstr "Ű§Ű­ÙŰž ۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„Ű­ŰČم"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Samba share name missing!"
-msgstr "Ű§ŰłÙ… Ù…ŰŽŰ§Ű±ÙƒŰ© Samba Ù…ÙÙ‚ÙˆŰŻ!"
+msgid "Remove the last item"
+msgstr "Ű§Ű­Ű°Ù Ű§Ù„Ù…Ű§ŰŻŰ© Ű§Ù„ŰŁŰźÙŠŰ±Ű©"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "ÙŠŰŹŰš ۧŰč۷ۧۥ Ű§ŰłÙ… Ű§Ù„ŰźŰ§ŰŻÙ… ŰŁÙˆ Ű±Ù‚Ù… IP Ű§Ù„ŰźŰ§Ű” ŰšŰ§Ù„ŰźŰ§ŰŻÙ…!"
+msgid "User list to restore (only the most recent date per user is important)"
+msgstr "Ù‚Ű§ŰŠÙ…Ű© Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…ÙŠÙ† Ű§Ù„Ű°ÙŠÙ† ŰłÙŠŰȘم ۧ۳ŰȘŰčۧۯŰȘهم"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detected"
-msgstr "ŰȘŰ­Ù‚Ù‚ ŰąÙ„ÙŠ"
+msgid "No net boot images created!"
+msgstr "لم يŰȘم Ű§Ù†ŰŽŰ§ŰĄ Ű”ÙˆŰ± Ű§Ù‚Ù„Ű§Űč Űčۚ۱ Ű§Ù„ŰŽŰšÙƒŰ©!"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Workgroup"
-msgstr "Ù…ŰŹÙ…ÙˆŰčŰ© Ű§Ù„Űčمل"
+msgid "use pptp"
+msgstr "ۧ۳ŰȘŰźŰŻÙ… pptp"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Share name"
-msgstr "Ű§ŰłÙ… Ű§Ù„Ù…ŰŽŰ§Ű±ÙƒŰ©"
+msgid "Choose which services should be automatically started at boot time"
+msgstr "ۧ۟ŰȘ۱ ŰŁÙŠ ŰźŰŻÙ…Ű§ŰȘ ŰȘŰ±ÙŠŰŻÙ‡Ű§ ŰŁÙ† ŰȘۚۯۣ ŰąÙ„ÙŠŰ§Ù‹ ŰčÙ†ŰŻ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SMB server IP"
-msgstr "IP ŰźŰ§ŰŻÙ… SMB"
+msgid "Learn how to use this printer"
+msgstr "ŰȘŰčلم كيف ŰȘŰłŰȘŰźŰŻÙ… Ù‡Ű°Ù‡ Ű§Ù„Ű·Ű§ŰšŰčŰ©"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SMB server host"
-msgstr "Ù…ŰłŰȘŰ¶ÙŠÙ ŰźŰ§ŰŻÙ… SMB"
+msgid "Configure the network now"
+msgstr "قم ŰšŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰŽŰšÙƒŰ©"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
-" ۧ۰ۧ ŰȘم Ű§ÙƒŰȘŰŽŰ§Ù Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„Ù…Ű·Ù„ÙˆŰšŰ© ŰąÙ„ÙŠŰ§Ù‹, كل Ù…Ű§ Űčليك هو ۧ۟ŰȘÙŠŰ§Ű±Ù‡Ű§ من Ű§Ù„Ù‚Ű§ŰŠÙ…Ű© Ű«Ù… "
-"ŰŁŰ¶Ù Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…, ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ±, و/ŰŁÙˆ Ù…ŰŹÙ…ÙˆŰčŰ© Ű§Ù„Űčمل Ű§Ù† ۭۧŰȘŰŹŰȘ Ù„Ű°Ù„Ùƒ."
+msgid "Choose a mirror from which to get the packages"
+msgstr "ۧ۟ŰȘ۱ Ù…Ű±ŰąŰ© ŰłÙŠŰȘم من ŰźÙ„Ű§Ù„Ù‡Ű§ ŰȘنŰČيل Ű§Ù„Ű­ŰČم"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
msgstr ""
-"Ù„Ù„Ű·ŰšŰ§ŰčŰ© Ű§Ù„Ù‰ ۷ۧۚŰčŰ© SMB, ŰłŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ ۧŰč۷ۧۥ Ű§ŰłÙ… Ù…ŰłŰȘŰ¶ÙŠÙ SMB (Ù…Ù„Ű­ÙˆŰžŰ©! Ù‚ŰŻ يكون "
-"Ù…ŰźŰȘÙ„ÙŰ§Ù‹ Űčن Ű§ŰłÙ… Ù…ŰłŰȘŰ¶ÙŠÙ TCP/IP!) و Ű±ŰšÙ…Ű§ ŰčÙ†ÙˆŰ§Ù† IP Ű§Ù„ŰźŰ§Ű” ŰšŰźŰ§ŰŻÙ… Ű§Ù„Ű·Ű§ŰšŰčŰ©, Ű§Ű¶Ű§ÙŰ© Ű§Ù„Ù‰ "
-"Ű§ŰłÙ… Ű§Ù„Ù…ŰŽŰ§Ű±ÙƒŰ© Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„ŰȘي ŰȘÙˆŰŻ Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„ÙŠÙ‡Ű§ ŰšŰ§Ù„Ű„Ű¶Ű§ÙŰ© Ű§Ù„Ù‰ Ű§ŰłÙ… Ù…ŰłŰȘŰźŰŻÙ…, ÙƒÙ„Ù…Ű© "
-"Ù…Ű±ÙˆŰ±, و Ù…ŰŹÙ…ÙˆŰčŰ© Űčمل Ù…Ù†Ű§ŰłŰšŰ©."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "ŰźÙŠŰ§Ű±Ű§ŰȘ ۷ۧۚŰčŰ© SMB (Windows 9x/NT)"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Ű§Ù„Ű·Ű§ŰšŰčŰ© \"%s\" Űčلى Ű§Ù„ŰźŰ§ŰŻÙ… \"%s\""
+"لم ŰȘŰȘمكن ۣۯۧ۩ ŰȘŰșÙŠÙŠŰ± Ű­ŰŹÙ… FAT من Ű§Ù„ŰȘŰčŰ§Ù…Ù„ مŰč ŰȘŰŹŰČŰŠŰȘك, \n"
+"ŰžÙ‡Ű± Ű§Ù„ŰźŰ·ŰŁ Ű§Ù„ŰȘŰ§Ù„ÙŠ: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", Ű§Ù„Ű·Ű§ŰšŰčŰ© \"%s\" Űčلى Ű§Ù„ŰźŰ§ŰŻÙ… \"%s\""
+msgid "Which sector do you want to move it to?"
+msgstr "ŰŁÙŠ Ù‚Ű·Ű§Űč ŰȘŰ±ÙŠŰŻ Ù†Ù‚Ù„Ù‡ŰŸ"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Remote printer name missing!"
-msgstr "Ű§ŰłÙ… Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„ŰšŰčÙŠŰŻŰ© Ù…ÙÙ‚ÙˆŰŻ!"
+msgid "Do you want to click on this button?"
+msgstr "Do you want to click on this button?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remote host name missing!"
-msgstr "Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ Ű§Ù„ŰšŰčÙŠŰŻ Ù…ÙÙ‚ÙˆŰŻ!"
+msgid "Bahamas"
+msgstr "ŰŹŰČ۱ Ű§Ù„ŰšŰ§Ù‡Ű§Ù…Ű§"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote printer name"
-msgstr "Ű§ŰłÙ… Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„ŰšŰčÙŠŰŻŰ©"
+msgid "Manual configuration"
+msgstr "ŰȘÙ‡ÙŠŰŠŰ© ÙŠŰŻÙˆÙŠŰ©"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Remote host name"
-msgstr "Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ Ű§Ù„ŰšŰčÙŠŰŻ"
+msgid "search"
+msgstr "ۭۚ۫"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
msgstr ""
-"Ù„Ű§ŰłŰȘŰźŰŻŰ§Ù… ۷ۧۚŰčŰ© lpd ŰšŰčÙŠŰŻŰ©, Űčليك ۧŰč۷ۧۥ Ű§ŰłÙ… Ù…ŰłŰȘŰ¶ÙŠÙ ŰźŰ§ŰŻÙ… Ű§Ù„Ű·Ű§ŰšŰčŰ© و Ű§ŰłÙ… Ű§Ù„Ű·Ű§ŰšŰčŰ© "
-"Űčلى Ű°Ù„Ùƒ Ű§Ù„ŰźŰ§ŰŻÙ…."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "ŰźÙŠŰ§Ű±Ű§ŰȘ ۷ۧۚŰčŰ© lpd Ű§Ù„ŰšŰčÙŠŰŻ"
+"Ù‡Ű°Ù‡ Ű§Ù„Ű­ŰČÙ…Ű© ŰȘقوم ŰšŰȘŰ­Ù…ÙŠÙ„ ŰźŰ±ÙŠŰ·Ű© Ù„ÙˆŰ­Ű© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­ Ű§Ù„Ù…ŰźŰȘۧ۱۩ ÙƒÙ…Ű§\n"
+"ŰȘم ŰȘŰčÙŠÙŠÙ†Ù‡Ű§ في /etc/sysconfig/keyboard. يمكن ۧ۟ŰȘÙŠŰ§Ű± Ù„ÙˆŰźŰ© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­ ۚۧ۳ŰȘŰźŰŻŰ§Ù… "
+"ۣۯۧ۩ kbdconfig.\n"
+"ÙŠŰŹŰš ŰȘŰ±ÙƒÙ‡Ű§ Ù…Ù…ÙƒÙ‘Ù†Ű© في ŰŁŰșÙ„Űš Ű§Ù„ŰŁŰŹÙ‡ŰČŰ©."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Manual configuration"
-msgstr "ŰȘÙ‡ÙŠŰŠŰ© ÙŠŰŻÙˆÙŠŰ©"
+msgid "Xpmac (installation display driver)"
+msgstr "Xpmac (Ù…ŰŽŰșل Űč۱۶ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ)"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "ÙŠŰŹŰš Űčليك Ű§ŰŻŰźŰ§Ù„/ۧ۟ŰȘÙŠŰ§Ű± ۷ۧۚŰčŰ©/ŰŹÙ‡Ű§ŰČ"
+msgid "Zeroconf host name must not contain a ."
+msgstr "ÙŠŰŹŰš ŰŁÙ† ÙŠŰ­ŰȘوي Ű§ŰłÙ… Ù…ŰłŰȘŰ¶ÙŠÙ Zeroconf Űčلى ."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
msgstr ""
-" (Ű§Ù„Ù…Ù†Ű§ÙŰ° Ű§Ù„Ù…ŰȘÙˆŰ§ŰČÙŠŰ©: /dev/lp0, /dev/lp1, ..., Ù…Ù…Ű§ŰŽÙ„ لـ LPT1:, LPT2:, ..., "
-"۷ۧۚŰčŰ© USB Ű§Ù„ŰŁÙˆÙ„ÙŠ: /dev/usb/lp0, ۷ۧۚŰčŰ© USB Ű§Ù„Ű«Ű§Ù†ÙŠŰ©: /dev/usb/lp1, ...)"
+"Syslog هي Ű§Ù„ÙˆŰłÙŠÙ„Ű© Ű§Ù„ŰȘي ŰȘŰłŰȘŰźŰŻÙ…Ù‡Ű§ Ű§Ù„ŰčŰŻÙŠŰŻ من Ű§Ù„Ù…Ű±Ű§Ù‚ŰšŰ§ŰȘ لŰȘŰłŰŹÙŠÙ„ Ű§Ù„Ű±ŰłŰ§ŰŠÙ„\n"
+"Ű§Ù„Ù‰ Ù…Ù„ÙŰ§ŰȘ ŰłŰŹÙ„Ű§ŰȘ ŰčŰŻÙŠŰŻŰ©. Ű§Ù†Ù‡Ű§ ÙÙƒŰ±Ű© ŰŹÙŠŰŻŰ© ŰŁÙ† ŰȘقوم ŰŻŰ§ŰŠÙ…Ű§Ù‹ ŰšŰȘŰŽŰșيل syslog."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "۱ۏۧۥ ۧ۟ŰȘ۱ Ű§Ù„Ù…Ù†ÙŰ° Ű§Ù„Ù…ÙˆŰ”Ù„Ű© Ű„Ù„ÙŠÙ‡ ۷ۧۚŰčŰȘك."
+msgid "Unknown/Others"
+msgstr "ŰșÙŠŰ± مŰčŰ±ÙˆÙ/ŰŁŰźŰ±Ù‰"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"ÙŰ¶Ù„Ű§Ù‹ ŰŁŰŻŰźÙ„ Ű§Ù„Ù…Ù†ÙŰ° Ű§Ù„Ù…ŰȘŰ”Ù„Ű© ŰšÙ‡ Ű§Ù„Ű·Ű§ŰšŰčŰ© ŰŁÙˆ ŰŁŰŻŰźÙ„ Ű§ŰłÙ… ŰŹÙ‡Ű§ŰČ/Ű§ŰłÙ… ملف في Ű­Ù‚Ù„ Ű§Ù„Ű„ŰŻŰźŰ§Ù„"
+msgid "No TV Card detected!"
+msgstr "لم يŰȘم Ű§ÙŠŰŹŰ§ŰŻ ŰšŰ·Ű§Ù‚Ű© ŰȘÙ„ÙŰ§ŰČ!"
+
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Options"
+msgstr "ŰźÙŠŰ§Ű±Ű§ŰȘ"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "۱ۏۧۥ ۧ۟ŰȘ۱ Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„ŰȘي ŰłŰȘŰ°Ù‡Űš Ű§Ù„ÙŠÙ‡Ű§ ÙˆŰžŰ§ŰŠÙ Ű§Ù„Ű·ŰšŰ§ŰčŰ©."
+msgid "The printer \"%s\" is set as the default printer now."
+msgstr "ŰȘم ŰȘŰčيين Ű§Ù„Ű·Ű§ŰšŰčŰ© \"%s\" ÙƒŰ·Ű§ŰšŰčŰ© Ű§ÙŰȘŰ±Ű§Ű¶ÙŠŰ© Ű§Ù„ŰąÙ†."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
msgstr ""
-"ÙŰ¶Ù„Ű§Ù‹ ŰŁŰŻŰźÙ„ Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„ŰȘي ŰȘŰ±ÙŠŰŻ ۧŰčŰŻŰ§ŰŻÙ‡Ű§. ۧŰčۯۧۯ Ù‡Ű°Ù‡ Ű§Ù„Ű·Ű§ŰšŰčŰ© ŰłÙŠŰčمل ŰąÙ„ÙŠŰ§Ù‹. Ű§Ù† لم يŰȘم "
-"Ű§ÙƒŰȘŰŽŰ§Ù Ű§Ù„Ű·Ű§ŰšŰčŰ© ŰšŰ§Ù„ŰŽÙƒÙ„ Ű§Ù„Ű”Ű­ÙŠŰ­ ŰŁÙˆ ۧ۰ۧ كنŰȘ ŰȘÙŰ¶Ù„ ŰȘÙ‡ÙŠŰŠŰ© ÙŠŰŻÙˆÙŠŰ© ŰŽŰșل \"ŰȘÙ‡ÙŠŰŠŰ© ÙŠŰŻÙˆÙŠŰ©\"."
+"ŰŁÙ†ŰȘ ŰȘقوم ŰšŰȘÙ‡ÙŠŰŠŰ© ۷ۧۚŰčŰ© OKI laser winprinter. Ù‡Ű°Ù‡ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ\n"
+"ŰȘŰłŰȘŰźŰŻÙ… ŰšŰ±ÙˆŰȘوكول ۧŰȘŰ”Ű§Ù„Ű§ŰȘ ۟ۧ۔ و Ù„Ű°Ű§ فهي ŰȘŰčمل ÙÙ‚Ű· ŰčÙ†ŰŻÙ…Ű§ ŰȘكون مŰȘŰ”Ù„Ű© ŰšŰ§Ù„Ù…Ù†ÙŰ° "
+"Ű§Ù„Ù…ŰȘÙˆŰ§ŰČي Ű§Ù„ŰŁÙˆÙ„. ŰčÙ†ŰŻÙ…Ű§ ŰȘكون Ű§Ù„Ű·Ű§ŰšŰčŰ© مŰȘŰ”Ù„Ű© ŰšÙ…Ù†ÙŰ° ۹۟۱ ŰŁÙˆ ŰšŰźŰ§ŰŻÙ… ۷ۚۧŰčŰ© فمن ÙŰ¶Ù„Ùƒ "
+"قم ŰšŰȘÙˆŰ”ÙŠÙ„ Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„Ù‰ Ű§Ù„Ù…Ù†ÙŰ° Ű§Ù„Ù…ŰȘÙˆŰ§ŰČي Ű§Ù„ŰŁÙˆÙ„ Ù‚ŰšÙ„ ŰŁÙ† ŰȘŰ·ŰšŰč Ű”ÙŰ­Ű© ۧ۟ŰȘŰšŰ§Ű±ÙŠŰ©. Ű§Ù† لم "
+"ŰȘفŰčل Ű°Ù„Ùƒ فلن ŰȘŰčمل Ű§Ù„Ű·Ű§ŰšŰčŰ©. ۧŰčۯۧۯ نوŰč Ű§Ù„ÙˆŰ”Ù„Ű© ŰłÙŠŰȘم ŰȘŰŹŰ§Ù‡Ù„Ù‡ من Ű§Ù„Ù…ŰŽŰșّل."
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr "Ù‡Ű§ هي Ù‚Ű§ŰŠÙ…Ű© ŰšÙƒÙ„ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…ŰȘŰ­Ù‚Ù‘ÙŽÙ‚ Ù…Ù†Ù‡Ű§ ŰąÙ„ÙŠŰ§Ù‹. "
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgstr "ŰŹÙŠÙ„ Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ (Ù…Ű«Ű§Ù„: 8 Ù„ŰšÙ†ŰȘيوم III, ...)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr "Ű­Ű§Ù„ÙŠŰ§Ù‹ Ù„Ű§ ÙŠÙˆŰŹŰŻ ۭۧŰȘÙ…Ű§Ù„ ŰšŰŻÙŠÙ„"
+msgid "Auto-detected"
+msgstr "ŰȘŰ­Ù‚Ù‚ ŰąÙ„ÙŠ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-"ۧŰčۯۧۯ Ű§Ù„Ű·Ű§ŰšŰčŰ© ŰłÙŠŰčمل ŰšŰŽÙƒÙ„ ŰąÙ„ÙŠ. ۧ۰ۧ لم يŰȘم Ű§ÙƒŰȘŰŽŰ§Ù ۷ۧۚŰčŰȘك ŰšŰ§Ù„ŰŽÙƒÙ„ Ű§Ù„Ű”Ű­ÙŠŰ­ ŰŁÙˆ ۧ۰ۧ "
-"كنŰȘ ŰȘÙŰ¶Ù„ ۧŰčۯۧۯ Ù…ŰźŰ”Ű” ŰŽŰșّل \"ŰȘÙ‡ÙŠŰŠŰ© ÙŠŰŻÙˆÙŠŰ©\"."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "The following printer was auto-detected. "
-msgstr "ŰȘم Ű§ÙƒŰȘŰŽŰ§Ù Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„ŰąŰȘÙŠŰ© ŰąÙ„ÙŠŰ§Ù‹. "
+"ŰŁÙ†ŰȘ Űčلى ÙˆŰŽÙƒ ŰȘÙ‡ÙŠŰŠŰ© ŰŹÙ‡Ű§ŰČك لŰȘŰ«ŰšÙŠŰȘ ŰźŰ§ŰŻÙ… PXE ÙƒŰźŰ§ŰŻÙ… DHCP\n"
+"و ŰźŰ§ŰŻÙ… TFTP Ù„ŰšÙ†Ű§ŰĄ ŰźŰ§ŰŻÙ… ŰȘŰ«ŰšÙŠŰȘ.\n"
+"ۚۧ۳ŰȘŰźŰŻŰ§Ù… Ù‡Ű°Ù‡ Ű§Ù„Ù…ÙŠŰČŰ© ŰȘكون Ű§Ù„Ű­ÙˆŰ§ŰłÙŠŰš Ű§Ù„ŰŁŰźŰ±Ù‰ Űčلى Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ© Ù‚Ű§ŰšÙ„Ű© للŰȘŰ«ŰšÙŠŰȘ من "
+"Ù‡Ű°Ű§ Ű§Ù„ŰŹÙ‡Ű§ŰČ.\n"
+"\n"
+"ŰȘŰŁÙƒŰŻ من ŰŁÙ†Ùƒ قمŰȘ ŰšŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰŽŰšÙƒŰ©/Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ ۚۧ۳ŰȘŰźŰŻŰ§Ù… drakconnect Ù‚ŰšÙ„ Ű§Ù„Ù…ŰȘۧۚŰčŰ©.\n"
+"\n"
+"Ù…Ù„Ű­ÙˆŰžŰ©: ŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ Ù…ÙˆŰ§ŰŠÙ… ŰŽŰšÙƒŰ© Ù…ŰźŰ”Ű” Ù„Ű„Űčۯۧۯ Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ© (LAN)."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
-"ÙŰ¶Ù„Ű§Ù‹ ŰŁŰŻŰźÙ„ Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„ŰȘي ÙŠŰŹŰš ŰŁÙ† ŰȘŰ°Ù‡Űš Ű§Ù„ÙŠÙ‡Ű§ ÙˆŰžŰ§ŰŠÙ Ű§Ù„Ű·ŰšŰ§ŰčŰ© ŰŁÙˆ ŰŁŰŻŰźÙ„ Ű§ŰłÙ… ŰŹÙ‡Ű§ŰČ/Ű§ŰłÙ… "
-"ملف في Ű­Ù‚Ù„ Ű§Ù„Ű„ŰŻŰźŰ§Ù„"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
#: ../../printer/printerdrake.pm:1
#, c-format
@@ -11519,1058 +11680,772 @@ msgid ""
msgstr ""
"ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„ŰȘي ŰȘŰ±ÙŠŰŻ ۧŰčŰŻŰ§ŰŻÙ‡Ű§ ŰŁÙˆ ŰŁŰŻŰźÙ„ Ű§ŰłÙ… ŰŹÙ‡Ű§ŰČ/Ű§ŰłÙ… ملف في Ű­Ù‚Ù„ Ű§Ù„Ű„ŰŻŰźŰ§Ù„"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr "ŰšŰŻÙ„Ű§Ù‹ من Ű°Ù„Ùƒ, يمكنك ŰȘŰ­ŰŻÙŠŰŻ Ű§ŰłÙ… ŰŹÙ‡Ű§ŰČ/Ű§ŰłÙ… ملف في Ű­Ù‚Ű§ Ű§Ù„Ű„ŰŻŰźŰ§Ù„"
+msgid "Refuse"
+msgstr "Ű§Ű±ÙŰ¶"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "HFS"
+msgstr "HFS"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
msgstr ""
-"ۧ۰ۧ لم ŰȘكن Ù‡Ű°Ù‡ هي Ű§Ù„ŰȘي ŰȘŰ±ÙŠŰŻ ŰȘÙ‡ÙŠŰŠŰȘÙ‡Ű§, ŰŁŰŻŰźÙ„ Ű§ŰłÙ… ŰŹÙ‡Ű§ŰČ/Ű§ŰłÙ… ملف في Ű­Ù‚Ù„ Ű§Ù„Ű„ŰŻŰźŰ§Ù„"
+"HardDrake يقوم ŰšŰ§Ù„ŰȘŰ­Ù‚Ù‚ من Ű§Ù„ŰčŰȘۧۯ, و يقوم ŰšŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰčŰȘۧۯ\n"
+"Ű§Ù„ŰŹŰŻÙŠŰŻ/Ű§Ù„Ù…ŰȘŰșÙŠŰ± ŰšŰŽÙƒÙ„ ۧ۟ŰȘÙŠŰ§Ű±ÙŠ."
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, c-format
-msgid "Available printers"
-msgstr "Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű©"
+msgid "Remote Printers"
+msgstr "Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„ŰšŰčÙŠŰŻŰ©"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "No printer found!"
-msgstr "Ù„Ű§ ŰȘÙˆŰŹŰŻ ۷ۧۚŰčŰ©!"
+msgid "Creating and formatting file %s"
+msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù†ŰŽŰ§ŰĄ و ŰȘŰŹÙ‡ÙŠŰČ Ű§Ù„Ù…Ù„Ù %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "You must enter a device or file name!"
-msgstr "ÙŠŰŹŰš Űčليك Ű§ŰŻŰźŰ§Ù„ ŰŹÙ‡Ű§ŰČ ŰŁÙˆ Ű§ŰłÙ… ملف!"
+msgid "if set to yes, check additions/removals of sgid files."
+msgstr "if set to yes, check additions/removals of sgid files."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
-"لم يŰȘم Ű§ÙŠŰŹŰ§ŰŻ ۷ۧۚŰčŰ© Ù…Ű­Ù„ÙŠŰ©! لŰȘŰ«ŰšÙŠŰȘ ۷ۧۚŰčŰ© ÙŠŰŻÙˆÙŠŰ§Ù‹ Ű§ŰŻŰźÙ„ Ű§ŰłÙ… ŰŹÙ‡Ű§ŰČ/Ű§ŰłÙ… ملف في Ű­Ù‚Ù„ "
-"Ű§Ù„Ű„ŰŻŰźŰ§Ù„ (Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…ŰȘÙˆŰ§ŰČÙŠŰ©: /dev/lp0, /dev/lp1, ..., Ù…Ù…Ű§Ű«Ù„Ű© لـLPT1:, "
-"LPT2:, ..., ۷ۧۚŰčŰ© USB Ű§Ù„ŰŁÙˆÙ„Ù‰: /dev/usb/lp0, ۷ۧۚŰčŰ© USB Ű§Ù„Ű«Ű§Ù†ÙŠŰ©: /dev/usb/"
-"lp1, ...)."
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Local Printer"
-msgstr "۷ۧۚŰčŰ© Ù…Ű­Ù„ÙŠŰ©"
+msgid "Choose an existing LVM to add to"
+msgstr "ۧ۟ŰȘ۱ LVM l,ŰŹÙˆŰŻ Ù„Ù„Ű§Ű¶Ű§ÙŰ©"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "USB printer \\#%s"
-msgstr "۷ۧۚŰčŰ© USB \\#%s"
+msgid "xfs restart"
+msgstr "xfs restart"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "Ű§Ù„Ű·Ű§ŰšŰčŰ© Űčلى Ű§Ù„Ù…Ù†ÙŰ° Ű§Ù„Ù…ŰȘÙˆŰ§ŰČي \\#%s"
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
+"Ű§Ù„Ű·Ű§ŰšŰčŰ© \"%s\" Ù…ÙˆŰŹÙˆŰŻŰ© Ù…ŰłŰšÙ‚Ű§Ù‹,\n"
+"هل ŰȘŰ±ÙŠŰŻ فŰčÙ„Ű§Ù‹ Ű§Ù„ÙƒŰȘۧۚ۩ فوق Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙ‡Ű§ŰŸ"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Ű§Ù„Ű·Ű§ŰšŰčŰ© \"%s\" Űčلى ŰźŰ§ŰŻÙ… SMB/Windows \"%s\""
+msgid "No partition available"
+msgstr "Ù„Ű§ ŰȘÙˆŰŹŰŻ ŰȘŰŹŰČŰŠŰ©"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "۷ۧۚŰčŰ© ŰŽŰšÙƒŰ© \"%s\", Ű§Ù„Ù…Ù†ÙŰ° %s"
+msgid "Use the scanners on hosts: "
+msgstr "ۧ۳ŰȘŰźŰŻÙ… Ű§Ù„Ù…Ű§ŰłŰ­Ű§ŰȘ Ű§Ù„Ű¶ÙˆŰŠÙŠŰ© Űčلى Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙŰ§ŰȘ: "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Detected %s"
-msgstr "ŰȘم Ű§Ù„ŰȘŰ­Ù‚Ù‚ من %s"
+msgid "Unselected All"
+msgstr "ŰȘم ۧŰČŰ§Ù„Ű© ۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„ÙƒÙ„"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ", Ű§Ù„Ű·Ű§ŰšŰčŰ© \"%s\" Űčلى ŰźŰ§ŰŻÙ… SMB/Windows \"%s\""
+msgid "Domain Name Resolver"
+msgstr "Domain Name Resolver"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", ۷ۧۚŰčŰ© ŰŽŰšÙƒŰ© \"%s\", Ű§Ù„Ù…Ù†ÙŰ° %s"
+msgid "Encryption key (again)"
+msgstr "Ù…ÙŰ§ŰȘŰ­ Ű§Ù„ŰȘŰŽÙÙŠŰ± (Ù…Ű±Ű© ŰŁŰźŰ±Ù‰)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"ŰȘÙ‡Ű§Ù†ÙŠÙ†Ű§, ŰȘم ŰȘŰ«ŰšÙŠŰȘ و ŰȘÙ‡ÙŠŰŠŰ© ۷ۧۚŰčŰȘك!\n"
-"\n"
-"يمكنك Ű§Ù„Ű·ŰšŰ§ŰčŰ© ۚۧ۳ŰȘŰźŰŻŰ§Ù… ŰŁÙ…Ű± \"ۧ۷ۚŰč\" في ŰȘŰ·ŰšÙŠÙ‚Ű§ŰȘك (Űčۧۯ۩ في Ù‚Ű§ŰŠÙ…Ű© \"ملف\").\n"
-"\n"
-"ۧ۰ۧ ۣ۱ۯŰȘ Ű§Ű¶Ű§ÙŰ© ŰŁÙˆ Ű­Ű°Ù ŰŁÙˆ ۧŰčۧۯ۩ ŰȘŰłÙ…ÙŠŰ© ۷ۧۚŰčŰ©, ŰŁŰ© ۧ۰ۧ ۣ۱ۯŰȘ ŰȘŰșÙŠÙŠŰ± ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„Ű·Ű§ŰšŰčŰ© "
-"Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠŰ© (ŰŹÙˆŰŻŰ© Ű§Ù„Ű·ŰšŰ§ŰčŰ©, ŰȘŰșÙŠÙŠŰ± Ű§Ù„Ű­ŰšŰ±, ...), ۧ۟ŰȘ۱ \"Ű§Ù„Ű·Ű§ŰšŰčŰ©\" في Ù‚ŰłÙ… \"Ű§Ù„ŰčŰȘۧۯ"
-"\" في Ù…Ű±ÙƒŰČ ŰȘŰ­ÙƒÙ… Mandrake."
+msgid "Samba share name missing!"
+msgstr "Ű§ŰłÙ… Ù…ŰŽŰ§Ű±ÙƒŰ© Samba Ù…ÙÙ‚ÙˆŰŻ!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr "ŰȘŰ­Ù‚Ù‘Ù‚ ŰąÙ„ÙŠŰ§Ù‹ من Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…ÙˆŰ”ÙˆÙ„Ű© ŰšÙ…Ű§ÙƒÙŠÙ†Ű§ŰȘ ŰȘŰčمل Űčلى Microsoft Windows"
+msgid "True Type install done"
+msgstr "ŰȘم ŰȘŰ«ŰšÙŠŰȘ ŰźŰ·ÙˆŰ· True Type"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr "ŰȘŰ­Ù‚Ù‘Ù‚ ŰąÙ„ÙŠŰ§Ù‹ من Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…ÙˆŰ”ÙˆÙ„Ű© Ù…ŰšŰ§ŰŽŰ±Ű©Ù‹ ŰšŰ§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ©"
+msgid "Detection in progress"
+msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰȘŰ­Ù‚Ù‚"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "ŰȘŰ­Ù‚Ù‚ ŰŁÙ„ÙŠŰ§ من Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…ŰȘŰ”Ù„Ű© ŰšÙ‡Ű°Ű§ Ű§Ù„ŰŹÙ‡Ű§ŰČ"
+msgid "Build Whole Kernel -->"
+msgstr "Ű§ŰšÙ†ÙŠ كل Ű§Ù„Ù†ÙˆŰ§Ű© -->"
+
+#: ../../install_steps.pm:1
+#, c-format
+msgid "Welcome to %s"
+msgstr "ŰŁÙ‡Ù„Ű§ ŰšÙƒÙ… في %s"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "ÙŰ¶Ù„Ű§Ù‹ ŰŁŰŻŰźÙ„ Ù‚Ű±Ű” ÙˆŰ­ŰŻŰ§ŰȘ Ű§Ù„ŰȘŰ­ŰŻÙŠŰ« في Ű§Ù„ŰłÙˆŰ§Ù‚Ű© %s"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Bootsplash"
+msgstr "Bootsplash!"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"The following printer\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"%s%s\n"
+"is directly connected to your system"
msgstr ""
+"Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„ŰȘŰ§Ù„ÙŠŰ©\n"
"\n"
-"ŰŁÙ‡Ù„Ű§Ù‹ ŰšÙƒÙ… في مŰčŰ§Ù„ŰŹ ۧŰčۯۧۯ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ\n"
-"\n"
-"Ù‡Ű°Ű§ Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ ŰłÙŠŰłŰ§ŰčŰŻÙƒ Űčلى ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ű·Ű§ŰšŰčŰ©/Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…ÙˆŰ”ÙˆÙ„Ű© ŰšÙ‡Ű°Ű§ Ű§Ù„ÙƒÙ…ŰšÙŠÙˆŰȘ۱.\n"
-"\n"
-"ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ù„ŰŻÙŠÙƒ ۷ۧۚŰčŰ©/۷ۧۚŰčۧŰȘ Ù…ÙˆŰ”ÙˆÙ„Ű© ŰšÙ‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű©, ÙŰ¶Ù„Ű§Ù‹ قم ŰšŰȘÙˆŰ”ÙŠÙ„Ù‡Ű§ Ű§Ù„Ù‰ Ù‡Ű°Ű§ "
-"Ű§Ù„ÙƒÙ…ŰšÙŠÙˆŰȘ۱ و قم ŰšŰȘŰŽŰșÙŠÙ„Ù‡Ű§ كي يŰȘم Ű§Ù„ŰȘŰ­Ù‚Ù‚ Ù…Ù†Ù‡Ű§/منهم ŰąÙ„ÙŠŰ§Ù‹.\n"
-"\n"
-" Ű§Ù†Ù‚Ű± \"Ű§Ù„ŰȘŰ§Ù„ÙŠ\" ŰčÙ†ŰŻÙ…Ű§ ŰȘكون Ù…ŰłŰȘŰčŰŻŰ§Ù‹, و Űčلى \"Ű§Ù„Űșۧۥ\" ۧ۰ۧ لم ŰȘكن ŰȘŰ±ÙŠŰŻ ۧŰčۯۧۯ "
-"Ű§Ù„Ű·Ű§ŰšŰčŰ©/Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„ŰąÙ†."
+"%s%s\n"
+"مŰȘŰ”Ù„Ű© Ù…ŰšŰ§ŰŽŰ±Ű©Ù‹ ŰšÙ†ŰžŰ§Ù…Ùƒ"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"ŰŁÙ‡Ù„Ű§Ù‹ ŰšÙƒÙ… في مŰčŰ§Ù„ŰŹ ۧŰčۯۧۯ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ\n"
-"Ù‡Ű°Ű§ Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ ŰłÙŠŰłŰ§ŰčŰŻÙƒ Űčلى ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ű·Ű§ŰšŰčŰ©/Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…ÙˆŰ”ÙˆÙ„Ű© ŰšÙ‡Ű°Ű§ Ű§Ù„ÙƒÙ…ŰšÙŠÙˆŰȘ۱ ŰŁÙˆ "
-"Ű§Ù„Ù…ÙˆŰ”ÙˆÙ„Ű© Ù…ŰšŰ§ŰŽŰ±Ű©Ù‹ ŰšŰ§Ù„ŰŽŰšÙƒŰ©.\n"
-"\n"
-"ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ù„ŰŻÙŠÙƒ ۷ۧۚŰčŰ©/۷ۧۚŰčۧŰȘ Ù…ÙˆŰ”ÙˆÙ„Ű© ŰšÙ‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű©, ÙŰ¶Ù„Ű§Ù‹ قم ŰšŰȘÙˆŰ”ÙŠÙ„Ù‡Ű§ Ű§Ù„Ù‰ Ù‡Ű°Ű§ "
-"Ű§Ù„ÙƒÙ…ŰšÙŠÙˆŰȘ۱ و قم ŰšŰȘŰŽŰșÙŠÙ„Ù‡Ű§ كي يŰȘم Ű§Ù„ŰȘŰ­Ù‚Ù‚ Ù…Ù†Ù‡Ű§/منهم ŰąÙ„ÙŠŰ§Ù‹. ŰŁÙŠŰ¶Ű§Ù‹ ÙŠŰŹŰš ŰŁÙ† ŰȘكون ۷ۧۚŰčŰ©/"
-"۷ۧۚŰčۧŰȘ Ű§Ù„ŰŽŰšÙƒŰ© Ù…ÙˆŰ”ÙˆÙ„Ű© و Ù…ŰŽŰșÙ‘Ù„Ű©.\n"
-"\n"
-"Ù„Ű§Ű­Űž ŰŁÙ† Ű§Ù„ŰȘŰ­Ù‚Ù‚ Ű§Ù„ŰąÙ„ÙŠ من Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Űčلى Ű§Ù„ŰŽŰšÙƒŰ© Ù‚ŰŻ ÙŠŰłŰȘŰșŰ±Ù‚ وقŰȘŰ§Ù‹ ŰŁŰ·ÙˆÙ„ من Ű§Ù„ŰȘŰ­Ù‚Ù‚ "
-"Ű§Ù„ŰąÙ„ÙŠ من Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…ÙˆŰ”ÙˆÙ„Ű© ŰšÙ‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű© ÙÙ‚Ű·. Ù„Ű°Ű§ قم ŰšŰȘŰčŰ·ÙŠÙ„ Ű§Ù„ŰȘŰ­Ù‚Ù‚ Ű§Ù„ŰąÙ„ÙŠ من "
-"۷ۧۚŰčۧŰȘ Ű§Ù„ŰŽŰšÙƒŰ© ۧ۰ۧ لم ŰȘكن ŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ Ù‡Ű°Ù‡ Ű§Ù„Ù…ÙŠŰČŰ©.\n"
-"\n"
-" Ű§Ù†Ù‚Ű± \"Ű§Ù„ŰȘŰ§Ù„ÙŠ\" ŰčÙ†ŰŻÙ…Ű§ ŰȘكون Ù…ŰłŰȘŰčŰŻŰ§Ù‹, و Űčلى \"Ű§Ù„Űșۧۥ\" ۧ۰ۧ لم ŰȘكن ŰȘŰ±ÙŠŰŻ ۧŰčۯۧۯ "
-"Ű§Ù„Ű·Ű§ŰšŰčŰ©/Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„ŰąÙ†."
+msgid "Printer sharing on hosts/networks: "
+msgstr "Ù…ŰŽŰ§Ű±ÙƒŰ© Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Űčلى Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙŰ§ŰȘ/Ű§Ù„ŰŽŰšÙƒŰ§ŰȘ: "
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
"\n"
-"ŰŁÙ‡Ù„Ű§Ù‹ ŰšÙƒÙ… في مŰčŰ§Ù„ŰŹ ۧŰčۯۧۯ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ\n"
-"Ù‡Ű°Ű§ Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ ŰłÙŠŰłŰ§ŰčŰŻÙƒ Űčلى ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ű·Ű§ŰšŰčŰ©/Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…ÙˆŰ”ÙˆÙ„Ű© ŰšÙ‡Ű°Ű§ Ű§Ù„ÙƒÙ…ŰšÙŠÙˆŰȘ۱ ŰŁÙˆ "
-"Ű§Ù„Ù…ÙˆŰ”ÙˆÙ„Ű© Ù…ŰšŰ§ŰŽŰ±Ű©Ù‹ ŰšŰ§Ù„ŰŽŰšÙƒŰ© ŰŁÙˆ ŰšÙ…Ű§ÙƒÙŠÙ†Ű© Windows ŰšŰčÙŠŰŻŰ©.\n"
-"\n"
-"ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ù„ŰŻÙŠÙƒ ۷ۧۚŰčŰ©/۷ۧۚŰčۧŰȘ Ù…ÙˆŰ”ÙˆÙ„Ű© ŰšÙ‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű©, ÙŰ¶Ù„Ű§Ù‹ قم ŰšŰȘÙˆŰ”ÙŠÙ„Ù‡Ű§ Ű§Ù„Ù‰ Ù‡Ű°Ű§ "
-"Ű§Ù„ÙƒÙ…ŰšÙŠÙˆŰȘ۱ و قم ŰšŰȘŰŽŰșÙŠÙ„Ù‡Ű§ كي يŰȘم Ű§Ù„ŰȘŰ­Ù‚Ù‚ Ù…Ù†Ù‡Ű§/منهم ŰąÙ„ÙŠŰ§Ù‹. ŰŁÙŠŰ¶Ű§Ù‹ ÙŠŰŹŰš ŰŁÙ† ŰȘكون ۷ۧۚŰčŰ©/"
-"۷ۧۚŰčۧŰȘ Ű§Ù„ŰŽŰšÙƒŰ© و ŰŁŰŹÙ‡ŰČŰ© Windows Ù…ÙˆŰ”ÙˆÙ„Ű© و Ù…ŰŽŰșÙ‘Ù„Ű©.\n"
-"\n"
-"Ù„Ű§Ű­Űž ŰŁÙ† Ű§Ù„ŰȘŰ­Ù‚Ù‚ Ű§Ù„ŰąÙ„ÙŠ من Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Űčلى Ű§Ù„ŰŽŰšÙƒŰ© Ù‚ŰŻ ÙŠŰłŰȘŰșŰ±Ù‚ وقŰȘŰ§Ù‹ ŰŁŰ·ÙˆÙ„ من Ű§Ù„ŰȘŰ­Ù‚Ù‚ "
-"Ű§Ù„ŰąÙ„ÙŠ من Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…ÙˆŰ”ÙˆÙ„Ű© ŰšÙ‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű© ÙÙ‚Ű·. Ù„Ű°Ű§ قم ŰšŰȘŰčŰ·ÙŠÙ„ Ű§Ù„ŰȘŰ­Ù‚Ù‚ Ű§Ù„ŰąÙ„ÙŠ من "
-"۷ۧۚŰčۧŰȘ Ű§Ù„ŰŽŰšÙƒŰ© و/ŰŁÙˆ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…ŰłŰȘŰ¶Ű§ÙŰ© من Windows ۧ۰ۧ لم ŰȘكن ŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ Ù‡Ű°Ù‡ "
-"Ű§Ù„Ù…ÙŠŰČŰ©.\n"
-"\n"
-" Ű§Ù†Ù‚Ű± \"Ű§Ù„ŰȘŰ§Ù„ÙŠ\" ŰčÙ†ŰŻÙ…Ű§ ŰȘكون Ù…ŰłŰȘŰčŰŻŰ§Ù‹, و Űčلى \"Ű§Ù„Űșۧۥ\" ۧ۰ۧ لم ŰȘكن ŰȘŰ±ÙŠŰŻ ۧŰčۯۧۯ "
-"Ű§Ù„Ű·Ű§ŰšŰčŰ©/Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„ŰąÙ†."
+"Ű§Ù„ŰŁÙ…Ű± \"%s\" ÙŠŰłÙ…Ű­ لك ÙƒŰ°Ù„Ùƒ يŰȘŰčŰŻÙŠÙ„ ۧŰčۯۧۯۧŰȘ Ű§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ Ù„ÙˆŰžÙŠÙŰ© ۷ۚۧŰčŰ© Ù…Ű­ŰŻŰŻŰ©. ŰšÙƒÙ„ "
+"ۚ۳ۧ۷۩ ŰŁŰ¶Ù Ű§Ù„Ű„Űčۯۧۯ Ű§Ù„Ù…Ű·Ù„ÙˆŰš Ű§Ù„Ù‰ ۳۷۱ Ű§Ù„ŰąÙˆŰ§Ù…Ű±, Ù…Ű«Ű§Ù„ \"%s <file>\". "
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
-"\n"
-"ŰŁÙ‡Ù„Ű§Ù‹ ŰšÙƒÙ… في مŰčŰ§Ù„ŰŹ ۧŰčۯۧۯ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ\n"
-"\n"
-"Ù‡Ű°Ű§ Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ ÙŠŰłÙ…Ű­ لك ŰšŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…Ű­Ù„ÙŠŰ© ŰŁÙˆ Ű§Ù„ŰšŰčÙŠŰŻŰ© ليŰȘم ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡Ű§ من Ù‡Ű°Ù‡ "
-"Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ùˆ و من Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű§ŰȘ Ű§Ù„ŰŁŰźŰ±Ù‰ Űčلى Ű§Ù„ŰŽŰšÙƒŰ©.\n"
-"\n"
-"ÙŠŰłŰŁÙ„Ùƒ Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ Űčن كل Ű§Ù„Ù…ŰčÙ„ÙˆÙ…Ű§ŰȘ Ű§Ù„ŰŁŰłŰ§ŰłÙŠŰ© Ù„Ű„Űčۯۧۯ Ű§Ù„Ű·Ű§ŰšŰčŰ© و ŰȘŰčŰ·ÙŠÙƒ Ű§Ù„Ù‚ŰŻŰ±Ű© Űčلى "
-"Ű§Ù„ÙˆŰ”ÙˆÙ„ لكل Ù…ŰŽŰșÙ„Ű§ŰȘ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ و ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„Ù…ŰŽŰșÙ„Ű§ŰȘ و ŰŁÙ†ÙˆŰ§Űč ÙˆŰ”Ù„Ű§ŰȘ Ű§Ù„Ű·Ű§ŰšŰčŰ©."
+"في ŰšŰč۶ Ű§Ù„ŰŁŰ­ÙŠŰ§Ù† ÙŠŰ­ŰȘۧۏ Ù…ŰŽŰșل %s مŰčÙ„ÙˆÙ…Ű§ŰȘ Ű§Ű¶Ű§ÙÙŠŰ© لكي يŰčمل\n"
+"ŰšŰŽÙƒÙ„ Ű”Ű­ÙŠŰ­, Ű§Ù„Ű§ ŰŁÙ†Ù‡ يمكنه Ű§Ù„Űčمل ŰŹÙŠŰŻŰ§ ŰšŰŻÙˆÙ†Ù‡Ű§. هل ŰȘŰ±ÙŠŰŻ ŰȘŰ­ŰŻÙŠŰŻ\n"
+"ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ű¶Ű§ÙÙŠŰ© له ŰŁÙˆ ŰȘŰłÙ…Ű­ Ù„Ù„Ù…ŰŽŰșل ŰšŰ§Ù„ŰȘŰ­Ù‚Ù‚ في ŰŹÙ‡Ű§ŰČك\n"
+"Űčن Ű§Ù„Ù…ŰčÙ„ÙˆÙ…Ű§ŰȘ Ű§Ù„ŰȘي ŰłÙŠŰ­ŰȘŰ§ŰŹÙ‡Ű§ŰŸ في ŰšŰč۶ Ű§Ù„ŰŁŰ­ÙŠŰ§Ù†, Ù‚ŰŻ يŰȘ۳ۚۚ Ű§Ù„ŰȘŰ­Ù‚Ù‚ في ŰȘŰčليق Ű§Ù„ŰŹÙ‡Ű§ŰČ, "
+"لكن\n"
+"Ù„Ű§ ÙŠŰŹŰš ŰŁÙ† يŰȘ۳ۚۚ Ű°Ù„Ùƒ في ŰŁÙŠ Ù…ŰŽŰ§ÙƒÙ„."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Not the correct CD label. Disk is labelled %s."
+msgstr "ŰčÙ„Ű§Ù…Ű© Ű§Ù„Ù‚Ű±Ű” Ù„ÙŠŰłŰȘ Ű§Ù„ŰčÙ„Ű§Ù…Ű© Ű§Ù„Ű”Ű­ÙŠŰ­Ű©. ŰčÙ„Ű§Ù…Ű© Ű§Ù„Ù‚Ű±Ű” هي %s."
+
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
"\n"
+"%s\n"
"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
+"Click on Configure to launch the setup wizard."
msgstr ""
+"ŰŁÙ‡Ù„Ű§ ŰšÙƒ في ۣۯۧ۩ Ù…ŰŽŰ§Ű±ÙƒŰ© Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ!\n"
"\n"
+"%s\n"
"\n"
-"لم يŰȘمكن Printerdrake من Ű§Ù„ŰȘŰčŰ±Ù Űčلى ۷۱ۧŰČ Ű·Ű§ŰšŰčŰȘك %s. ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ Ű§Ù„Ű·Ű±Ű§ŰČ Ű§Ù„Ű”Ű­ÙŠŰ­ "
-"من Ű§Ù„Ù‚Ű§ŰŠÙ…Ű©."
+"ۧ۶ŰșŰ· Űčلى ŰȘÙ‡ÙŠŰŠŰ© لŰȘŰŽŰșيل مŰčŰ§Ù„ŰŹ Ű§Ù„Ű„Űčۯۧۯ."
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid ")"
-msgstr ")"
+msgid "Cuba"
+msgstr "ÙƒÙˆŰšŰ§"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on "
-msgstr " Űčلى "
+msgid "Searching for new printers..."
+msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰšŰ­Ű« Űčن ۷ۧۚŰčۧŰȘ ŰŹŰŻÙŠŰŻŰ©..."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "("
-msgstr "("
+msgid "Belize"
+msgstr "ŰšÙŠÙ„ÙŠŰČ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configuring printer ..."
-msgstr "ŰŹŰ§Ű±ÙŠ Ű„Űčۯۧۯ Ű§Ù„Ű·Ű§ŰšŰčŰ© ..."
+msgid " (multi-session)"
+msgstr " (مŰȘŰčŰŻŰŻ Ű§Ù„ŰŹÙ„ŰłŰ§ŰȘ)"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Searching for new printers..."
-msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰšŰ­Ű« Űčن ۷ۧۚŰčۧŰȘ ŰŹŰŻÙŠŰŻŰ©..."
+msgid "Kernel Boot Timeout"
+msgstr "Ű§Ù„ÙˆÙ‚ŰȘ Ű§Ù„ŰŁÙ‚Ű”Ù‰ Ù„Ű„Ù‚Ù„Ű§Űč Ű§Ù„Ù†ÙˆŰ§Ű©"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"Ù…Ù„Ű­ÙˆŰžŰ©: ۧŰčŰȘÙ…Ű§ŰŻŰ§Ù‹ Űčلى ۷۱ۧŰČ Ű§Ù„Ű·Ű§ŰšŰčŰ© و Ù†ŰžŰ§Ù… Ű§Ù„Ű·ŰšŰ§ŰčŰ© ÙŰłÙŠŰȘم ŰȘŰ«ŰšÙŠŰȘ Ű­ÙˆŰ§Ù„ÙŠ %d "
-"ميŰșŰ§ŰšŰ§ÙŠŰȘ من Ű§Ù„ŰšŰ±Ù…ŰŹÙŠŰ§ŰȘ Ű§Ù„Ű„Ű¶Ű§ÙÙŠŰ©."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr "هل ŰŁÙ†ŰȘ مŰȘŰŁÙƒŰŻ ŰŁÙ†Ùƒ ŰȘŰ±ÙŠŰŻ ŰȘÙ†Ű”ÙŠŰš Ű§Ù„Ű·ŰšŰ§ŰčŰ© Űčلى Ù‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű©ŰŸ\n"
+"يمكن Ù„ŰšŰ·Ű§Ù‚ŰȘك Ű§Ù„Ű­Ű”ÙˆÙ„ Űčلى ŰŻŰčم للŰȘŰłŰ±ÙŠŰč Ű«Ù„Ű§Ű«ÙŠ Ű§Ù„ŰŁŰšŰčۧۯ لكن ÙÙ‚Ű· مŰč XFree %s.\n"
+"ŰšŰ·Ű§Ù‚ŰȘك Ù…ŰŻŰčÙˆÙ…Ű© Űčن Ű·Ű±ÙŠÙ‚ XFree %s Ű§Ù„ŰȘي يمكن ŰŁÙ† ŰȘكون Ù…ŰŻŰčÙˆÙ…Ű© ŰšŰŽÙ„ ŰŁÙŰ¶Ù„ في Ű§Ù„ÙˆŰ¶Űč "
+"Ű«Ù†Ű§ŰŠÙŠ Ű§Ù„ŰŁŰšŰčۧۯ."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "هل ŰȘŰ±ÙŠŰŻ ŰȘمكين Ű§Ù„Ű·ŰšŰ§ŰčŰ© Űčلى Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…Ű°ÙƒÙˆŰ±Ű© ŰŁŰčÙ„Ű§Ù‡ŰŸ\n"
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "Űč۫۱ مŰčŰ§Ù„ŰŹ Ű§Ù„ŰȘŰŹŰČŰŠŰ© في DrakX Űčلى Ű§Ù„Ű­Ù„ÙˆÙ„ Ű§Ù„ŰȘŰ§Ù„ÙŠŰ©:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "هل ŰȘŰ±ÙŠŰŻ ŰȘمكين Ű§Ù„Ű·ŰšŰ§ŰčŰ© Űčلى Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ في Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ©ŰŸ\n"
+msgid "Hungarian"
+msgstr "Ű§Ù„Ù…ŰŹŰ±ÙŠŰ©"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
msgstr ""
-"هل ŰȘŰ±ÙŠŰŻ ŰȘمكين Ű§Ù„Ű·ŰšŰ§ŰčŰ© Űčلى Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…Ű°ÙƒÙˆŰ±Ű© ŰŁŰčÙ„Ű§Ù‡ ŰŁÙ… Űčلى Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ في Ű§Ù„ŰŽŰšÙƒŰ© "
-"Ű§Ù„Ù…Ű­Ù„ÙŠŰ©ŰŸ\n"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr " (ŰȘŰŁÙƒŰŻ من ŰŁÙ† كل Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ù…ÙˆŰ”ÙˆÙ„Ű© و ŰȘŰčمل).\n"
+"ۧ۟ŰȘ۱ Ù…ÙˆÙŰ± Ű§Ù„ŰźŰŻÙ…Ű© Ű§Ù„ŰźŰ§Ű” ŰšÙƒ.\n"
+"Ű§Ù† لم يكن Ù…ÙˆŰŹÙˆŰŻŰ§Ù‹ في Ű§Ù„Ù‚Ű§ŰŠÙ…Ű©, ۧ۟ŰȘ۱ ŰșÙŠŰ± Ù…ÙˆŰŹÙˆŰŻ."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr "لم يŰȘم Ű§Ù„ŰčŰ«ÙˆŰ± Űčلى ۷ۧۚŰčۧŰȘ مŰȘŰ”Ù„Ű© Ù…ŰšŰ§ŰŽŰ±Ű©Ù‹ ŰšÙ‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű©"
+msgid "Automatic time synchronization (using NTP)"
+msgstr "ŰȘŰČŰ§Ù…Ù† وقŰȘ ŰąÙ„ÙŠ (ۚۧ۳ŰȘŰźŰŻŰ§Ù… NTP)"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-"\n"
-"ŰȘÙˆŰŹŰŻ %d ۷ۧۚŰčۧŰȘ ŰșÙŠŰ± مŰčŰ±ÙˆÙŰ© مŰȘŰ”Ù„Ű© Ù…ŰšŰ§ŰŽŰ±Ű©Ù‹ ŰšÙ†ŰžŰ§Ù…Ùƒ"
+msgid "8 MB"
+msgstr "8 ميŰșŰ§ŰšŰ§ÙŠŰȘ"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"ŰȘÙˆŰŹŰŻ ۷ۧۚŰčŰ© ŰșÙŠŰ± مŰčŰ±ÙˆÙŰ© مŰȘŰ”Ù„Ű© Ù…ŰšŰ§ŰŽŰ±Ű©Ù‹ ŰšÙ†ŰžŰ§Ù…Ùƒ"
+msgid "LDAP Server"
+msgstr "ŰźŰ§ŰŻÙ… LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
msgstr ""
-"Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„ŰȘŰ§Ù„ÙŠŰ©\n"
-"\n"
-"%s%s\n"
-"مŰȘŰ”Ù„Ű© Ù…ŰšŰ§ŰŽŰ±Ű©Ù‹ ŰšÙ†ŰžŰ§Ù…Ùƒ"
+"ŰŻŰčم PCMCIA مهم Ù„ŰŻŰčم ŰŁŰŽÙŠŰ§ŰĄ Ù…Ű«Ù„ ŰšŰ·Ű§Ù‚Ű§ŰȘ Ű§Ù„Ű„ÙŠŰ«Ű±Ù†ŰȘ و\n"
+"Ű§Ù„Ù…ÙˆŰŻÙ…Ű§ŰȘ Űčلى Ű§Ù„ŰŁŰŹÙ‡ŰČŰ© Ű§Ù„ŰŻÙŰȘŰ±ÙŠŰ©. لن يŰȘم ۚۯۥ Ù‡Ű°Ù‡ Ű§Ù„ŰźŰŻÙ…Ű© Ű§Ù„Ű§ ŰčÙ†ŰŻ ŰȘÙ‡ÙŠŰŠŰȘÙ‡Ű§ Ù„Ű°Ű§ ÙÙ„Ű§ "
+"Ù…ŰłÙƒÙ„Ű© ŰčÙ†ŰŻ ŰȘŰŽŰșيله\n"
+"Űčلى Ű§Ù„ŰŁŰŹÙ‡ŰČŰ© Ű§Ù„ŰȘي Ù„Ű§ ŰȘŰ­ŰȘŰ§ŰŹÙ‡."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„ŰȘŰ§Ù„ÙŠŰ©\n"
-"\n"
-"%s%s\n"
-"مŰȘŰ”Ù„Ű© Ù…ŰšŰ§ŰŽŰ±Ű©Ù‹ ŰšÙ†ŰžŰ§Ù…Ùƒ"
+msgid "Choose your country"
+msgstr "Ű„ŰźŰȘ۱ ŰšÙ„ŰŻÙƒ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The following printers\n"
"\n"
-"%s%s\n"
-"are directly connected to your system"
+"- System Files:\n"
msgstr ""
-"Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„ŰȘŰ§Ù„ÙŠŰ©\n"
"\n"
-"%s%s\n"
-"مŰȘŰ”Ù„Ű© Ù…ŰšŰ§ŰŽŰ±Ű©Ù‹ ŰšÙ†ŰžŰ§Ù…Ùƒ"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "and %d unknown printers"
-msgstr "و %d ۷ۧۚŰčۧŰȘ ŰșÙŠŰ± مŰčŰ±ÙˆÙŰ©"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "and one unknown printer"
-msgstr "و ۷ۧۚŰčŰ© ŰșÙŠŰ± مŰčŰ±ÙˆÙŰ©"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Checking your system..."
-msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰȘŰŁÙƒŰŻ من Ù†ŰžŰ§Ù…Ùƒ..."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Restarting CUPS..."
-msgstr "ŰŹŰ§Ű±ÙŠ ۧŰčۧۯ۩ ŰȘŰŽŰșيل CUPS..."
+"-Ù…Ù„ÙÙ‘Ű§ŰȘ Ű§Ù„Ù†Ù‘ŰžŰ§Ù… :\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr "Ù‡Ű°Ű§ Ű§Ù„ŰźŰ§ŰŻÙ… Ù…ÙˆŰŹÙˆŰŻ في Ű§Ù„Ù‚Ű§ŰŠÙ…Ű© Ù…ŰłŰšÙ‚Ű§Ù‹, Ù„Ű§ يمكن Ű§Ű¶Ű§ÙŰȘه Ù…Ű±Ű© ŰŁŰźŰ±Ù‰.\n"
+msgid "Standalone Tools"
+msgstr "Ű§Ù„ŰŁŰŻÙˆŰ§ŰȘ Ű§Ù„Ù…Ù†ÙŰ”Ù„Ű©"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr "ŰŁÙ…Ű«Ù„Ű© لŰčÙ†Ű§ÙˆÙŠÙ† IP Ű”Ű­ÙŠŰ­Ű©:\n"
+msgid "Where"
+msgstr "ŰŁÙŠÙ†"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "ŰčÙ†ÙˆŰ§Ù† IP Ű§Ù„Ù…ŰŻÙŰźÙ„ ŰșÙŠŰ± Ű”Ű­ÙŠŰ­.\n"
+msgid "but not matching"
+msgstr "لكن Ù„ÙŠŰł Ù…ÙˆŰ§ŰŠÙ…Ű©"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Server IP missing!"
-msgstr "IP Ű§Ù„ŰźŰ§ŰŻÙ… Ù…ÙÙ‚ÙˆŰŻ!"
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
+msgstr "يمكنك Ù‡Ù†Ű§ ۧ۟ŰȘÙŠŰ§Ű± Ù…ŰŽŰșل ŰšŰŻÙŠÙ„ (ALSA ŰŁÙˆ OSS) Ù„ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű”ÙˆŰȘ (%s)."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr ""
+msgid "Configuring PCMCIA cards..."
+msgstr "ŰŹŰ§Ű±ÙŠ ŰȘÙ‡ÙŠŰŠŰ© ŰšŰ·Ű§Ù‚Ű§ŰȘ PCMCIA..."
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr "ŰŁŰŻŰźÙ„ ŰčÙ†ÙˆŰ§Ù† IP و Ù…Ù†ÙŰ° Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ Ű§Ù„Ű°ÙŠ ŰȘŰ±ÙŠŰŻ ۧ۳ŰȘŰźŰŻŰ§Ù… ۷ۧۚŰčۧŰȘه."
+msgid "kdesu missing"
+msgstr "kdesu missing"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Űčلى ŰźŰ§ŰŻÙ…Ű§ŰȘ CUPS Ű§Ù„ŰšŰčÙŠŰŻŰ©"
+msgid "Encryption key"
+msgstr "Ù…ÙŰ§ŰȘŰ­ Ű§Ù„ŰȘŰŽÙÙŠŰ±"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Remove selected server"
-msgstr "Ű§Ű­Ű°Ù Ű§Ù„ŰźŰ§ŰŻÙ… Ű§Ù„Ù…ŰźŰȘۧ۱"
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Edit selected server"
-msgstr "ۭ۱۱ Ű§Ù„ŰźŰ§ŰŻÙ… Ű§Ù„Ù…ŰźŰȘۧ۱"
+msgid "Christmas Island"
+msgstr "ŰŹŰČ۱ Ű§Ù„ÙƒŰ±ÙŠŰłÙ…Ű§Űł"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add server"
-msgstr "Ű§Ű¶Ù ŰźŰ§ŰŻÙ…"
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr "ÙŰŽÙ„ ŰȘŰ«ŰšÙŠŰȘ Ù…Ű­Ù…Ù‘Ù„ Ű§Ù„Ű„Ù‚Ù„Ű§Űč. ŰžÙ‡Ű± Ű§Ù„ŰźŰ·ŰŁ Ű§Ù„ŰȘŰ§Ù„ÙŠ:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
-"ŰŁŰŻŰźÙ„ Ù‡Ù†Ű§ ŰźŰ§ŰŻÙ…Ű§ŰȘ CUPS Ű§Ù„ŰȘي ŰȘŰ±ÙŠŰŻ ۧ۳ŰȘŰźŰŻŰ§Ù… ۷ۧۚŰčۧŰȘÙ‡Ű§. ŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ Űčمل Ű°Ù„Ùƒ ÙÙ‚Ű· Ű§Ù† لم "
-"ŰȘقم Ű§Ù„ŰźŰ§ŰŻÙ…Ű§ŰȘ ŰšÙ†ŰŽŰ± مŰčÙ„ÙˆÙ…Ű§ŰȘ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Űčلى Ű§Ù„ŰŽŰšÙƒ Ű§Ù„Ù…Ű­Ù„ÙŠŰ©."
+msgid "EIDE/SCSI channel"
+msgstr "Ù‚Ù†Ű§Ű© EIDE/SCSI"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "IP address of host/network:"
-msgstr "ŰčÙ†ÙˆŰ§Ù† IP Ù„Ù„Ù…ŰłŰȘŰ¶ÙŠÙ/Ű§Ù„ŰŽŰšÙƒŰ©:"
+msgid "Set this printer as the default"
+msgstr "Űčيّن Ù‡Ű°Ù‡ Ű§Ù„Ű·Ű§ŰšŰčŰ© ÙƒŰ·Ű§ŰšŰčŰ© Ű§ÙŰȘŰ±Ű§Ű¶ÙŠŰ©"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr "Ù‡Ű°Ű§ Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ/Ű§Ù„ŰŽŰšÙƒŰ© Ù…ÙˆŰŹÙˆŰŻ في Ű§Ù„Ù‚Ű§ŰŠÙ…Ű© Ù…ŰłŰšÙ‚Ű§Ù‹, Ù„Ű§ يمكن Ű§Ű¶Ű§ÙŰȘه Ù…Ű±Ű© ŰŁŰźŰ±Ù‰.\n"
+msgid "partition %s"
+msgstr "Ű§Ù„ŰȘŰŹŰČŰŠŰ© %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr "ŰčÙ†ÙˆŰ§Ù† IP Ű§Ù„Ù…ŰŻÙŰźÙ„ Ù„Ù„Ù…ŰłŰȘŰ¶ÙŠÙ/Ű§Ù„ŰŽŰšÙƒŰ© ŰșÙŠŰ± Ű”Ű­ÙŠŰ­.\n"
+msgid "Paranoid"
+msgstr "Ù…Ű±ŰȘفŰč ۏۯۧ"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Host/network IP address missing."
-msgstr "ŰčÙ†ÙˆŰ§Ù† IP Ù„Ù„Ù…ŰłŰȘŰ¶ÙŠÙ/Ű§Ù„ŰŽŰšÙƒŰ© Ù…ÙÙ‚ÙˆŰŻ."
+msgid "NIS"
+msgstr "NIS"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr "ۧ۟ŰȘ۱ Ű§Ù„ŰŽŰšÙƒŰ© ŰŁÙˆ Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ Ű§Ù„ŰȘي ÙŠŰŹŰš ŰŁÙ† ŰȘكون Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…Ű­Ù„ÙŠŰ© مŰȘÙˆÙŰ±Ű© له:"
+msgid "<-- Del User"
+msgstr "<-- Ű§Ű­Ű°Ù Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Sharing of local printers"
-msgstr "Ù…ŰŽŰ§Ű±ÙƒŰ© Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…Ű­Ù„ÙŠŰ©"
+msgid "Location on the bus"
+msgstr "Ű§Ù„Ù…ÙƒŰ§Ù† Űčلى Ű§Ù„Ù€bus"
+#
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove selected host/network"
-msgstr "Ű§Ű­Ű°Ù Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ/Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…ŰźŰȘۧ۱۩"
+msgid "No printer found!"
+msgstr "Ù„Ű§ ŰȘÙˆŰŹŰŻ ۷ۧۚŰčŰ©!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Edit selected host/network"
-msgstr "Ű­Ű±Ù‘Ű± Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ/Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…ŰźŰȘۧ۱۩"
+msgid "the vendor name of the device"
+msgstr "Ű§ŰłÙ… Ù…Ű”Ù†Ù‘Űč Ű§Ù„ŰŹÙ‡Ű§ŰČ"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Add host/network"
-msgstr "ŰŁŰ¶Ù Ù…ŰłŰȘŰ¶ÙŠÙ/ŰŽŰšÙƒŰ©"
+msgid "Erase entire disk"
+msgstr "Ű§Ù…ŰłŰ­ كل Ű§Ù„Ù‚Ű±Ű”"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
-"Ù‡Ű°Ù‡ هي Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű§ŰȘ و Ű§Ù„ŰŽŰšÙƒŰ§ŰȘ Ű§Ù„ŰȘي ÙŠŰŹŰš ŰŁÙ† ŰȘكون Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…Ű­Ù„ÙŠŰ© مŰȘÙˆÙŰ±Ű© Ù„Ù‡Ű§:"
+msgid " (Default)"
+msgstr " (Ű§ÙŰȘŰ±Ű§Ű¶ÙŠ)"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
msgstr ""
-"ŰčÙ†ŰŻ ŰȘŰŽŰșيل Ù‡Ű°Ű§ Ű§Ù„ŰźÙŠŰ§Ű±, فŰčÙ†ŰŻ كل ŰšŰŻŰ§ÙŠŰ© ŰȘŰŽŰșيل لـCUPS ŰłÙŠŰȘم Ű§Ù„ŰȘŰŁÙƒŰŻ ŰąÙ„ÙŠŰ§Ù‹ من Ù…Ű§\n"
-"\n"
-"- ۧ۰ۧ ÙƒŰ§Ù† LPD/LPRng Ù…Ű«ŰšŰȘŰ§Ù‹, لن ŰȘŰȘم Ű§Ù„ÙƒŰȘۧۚ۩ فوق /etc/printcap Űčن Ű·Ű±ÙŠÙ‚ CUPS\n"
-"\n"
-"- ۧ۰ۧ ÙƒŰ§Ù† /etc/cups/cupsd.conf Ù…ÙÙ‚ÙˆŰŻ, ŰłÙŠŰȘم Ű§Ù†ŰŽŰ§Ű€Ù‡ في Ù‡Ű°Ù‡ Ű§Ù„Ű­Ű§Ù„\n"
-"\n"
-"- ۧ۰ۧ ÙƒŰ§Ù†ŰȘ مŰčÙ„ÙˆÙ…Ű§ŰȘ Ű§Ù„Ű·ŰšŰ§ŰčŰ© Ù…Ù†ŰŽÙˆŰ±Ű©, ŰŁÙŠ ŰŁÙ†Ù‡Ű§ Ù„Ű§ ŰȘŰ­ŰȘوي \"localhost\" ÙƒŰ„ŰłÙ… "
-"Ù„Ù„ŰźŰ§ŰŻÙ….\n"
+"Arguments: ()\n"
"\n"
-"ۧ۰ۧ ÙƒŰ§Ù†ŰȘ ŰšŰč۶ Ù‡Ű°Ù‡ Ű§Ù„Ű„ŰŹŰ±Ű§ŰĄŰ§ŰȘ Ù‚ŰŻ ŰȘ۳ۚۚŰȘ ŰšÙ…ŰŽŰ§ÙƒÙ„ لك, ŰčŰ·Ù‘Ù„ Ù‡Ű°Ű§ Ű§Ù„ŰźÙŠŰ§Ű±, لكن في Ù‡Ű°Ù‡ "
-"Ű§Ù„Ű­Ű§Ù„ Űčليك Ű§Ù„Ű„Ù†ŰȘŰšŰ§Ù‡ Ù„Ù‡Ű°Ù‡ Ű§Ù„Ù†Ù‚Ű§Ű·."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "ŰȘŰ”Ű­ÙŠŰ­ ŰąÙ„ÙŠ لŰȘÙ‡ÙŠŰŠŰ© CUPS"
+msgid "Automatic reconfiguration"
+msgstr "ۧŰčۯۧ۩ ŰȘÙ‡ÙŠŰŠŰ© ŰąÙ„ÙŠŰ©"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Japanese text printing mode"
-msgstr "ŰȘŰșÙŠÙŠŰ± Ù†ŰžŰ§Ù… Ű§Ù„Ű·ŰšŰ§ŰčŰ©"
+msgid "Receiving Speed:"
+msgstr "۳۱ŰčŰ© Ű§Ù„Ű„ŰłŰȘÙ‚ŰšŰ§Ù„"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
-"Ù„Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Űčلى ŰźŰ§ŰŻÙ…Ű§ŰȘ CUPS Ű§Ù„ŰšŰčÙŠŰŻŰ© في ŰŽŰšÙƒŰȘك Ű§Ù„Ù…Ű­Ù„ÙŠŰ© ŰȘŰ­ŰȘۧۏ ÙÙ‚Ű· Ű§Ù„Ù‰ "
-"ŰȘŰŽŰșيل ŰźÙŠŰ§Ű± \"ۧŰč۫۱ Űčلى Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű© Űčلى Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű§ŰȘ Ű§Ù„ŰšŰčÙŠŰŻŰ©\"; ŰłŰȘقوم "
-"ŰźŰ§ŰŻÙ…Ű§ŰȘ CUPS ۚۄŰčÙ„Ű§Ù… Ù…Ű§ÙƒÙŠÙ†ŰȘك Űčن Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…ÙˆŰŹÙˆŰŻŰ© Ù„ŰŻÙŠÙ‡Ű§. ÙƒŰ§ÙŰ© Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„ŰȘي ŰȘم "
-"Ű§Ù„ŰȘŰčŰ±Ù ŰčÙ„ÙŠÙ‡Ű§ من Ù‚ÙŰšÙ„ Ù…Ű§ÙƒÙŠÙ†ŰȘك Ù…ÙˆŰŹÙˆŰŻŰ© في Ù‚ŰłÙ… \"Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„ŰšŰčÙŠŰŻŰ©\" Űčلى Ù†Ű§ÙŰ°Ű© "
-"Printerdrake Ű§Ù„Ű±ŰŠÙŠŰłÙŠŰ©. ۧ۰ۧ لم ŰȘكن ŰźŰ§ŰŻÙ…Ű§ŰȘ CUPS في ŰŽŰšÙƒŰȘك Ű§Ù„Ù…Ű­Ù„ÙŠŰ©, فŰčليك ŰŁÙ† "
-"ŰȘقوم ŰšŰ„ŰŻŰźŰ§Ù„ ŰčÙ†Ű§ÙˆÙŠÙ† IP و ŰŁŰ±Ù‚Ű§Ù… Ű§Ù„Ù…Ù†Ű§ÙŰ° (ۧ۟ŰȘÙŠŰ§Ű±ÙŠ) Ù„Ù„Ű­Ű”ÙˆÙ„ Űčلى مŰčÙ„ÙˆÙ…Ű§ŰȘ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ "
-"من Ű§Ù„ŰźŰ§ŰŻÙ…Ű§ŰȘ."
+msgid "Turks and Caicos Islands"
+msgstr "ŰŹŰČ۱ Ű§Ù„ŰȘŰ±Ùƒ و Ű§Ù„ÙƒŰ§ÙŠÙƒÙˆŰł"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "None"
-msgstr "ÙˆÙ„Ű§ ŰŽŰŠ"
+msgid "permissions"
+msgstr "Ű§Ù„ŰȘŰ”Ű§Ű±ÙŠŰ­"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Additional CUPS servers: "
-msgstr "ŰźŰ§ŰŻÙ…Ű§ŰȘ CUPS Ű§Ù„Ű„Ű¶Ű§ÙÙŠŰ©: "
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
-#, c-format
-msgid "No remote machines"
-msgstr "Ù„Ű§ ŰŁŰŹÙ‡ŰČŰ© ŰšŰčÙŠŰŻŰ©"
+msgid "<- Previous"
+msgstr "<- Ű§Ù„ŰłŰ§ŰšÙ‚ "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Custom configuration"
-msgstr "ŰȘÙ‡ÙŠŰŠŰ© Ù…ŰźŰ”Ű”Ű©"
+msgid "Internet Connection Sharing configuration"
+msgstr "Ű„ŰčۯۧۯۧŰȘ Ù…ŰŽŰ§Ű±ÙƒŰ© Ű„ŰȘŰ”Ű§Ù„ Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Ù…ŰŽŰ§Ű±ÙƒŰ© Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Űčلى Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙŰ§ŰȘ/Ű§Ù„ŰŽŰšÙƒŰ§ŰȘ: "
+msgid "Toggle between flat and group sorted"
+msgstr "Toggle between flat and group sorted"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr "ۧŰč۫۱ Űčلى Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…ÙˆŰŹÙˆŰŻŰ© Űčلى Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű§ŰȘ Ű§Ù„ŰšŰčÙŠŰŻŰ© ŰąÙ„ÙŠŰ§Ù‹"
+msgid "Themes"
+msgstr "Ű§Ù„ŰłÙ…Ű§ŰȘ"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr "Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Űčلى Ù‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű© مŰȘÙˆÙŰ±Ű© Ù„Ù„ŰŁŰŹÙ‡ŰČŰ© Ű§Ù„ŰŁŰźŰ±Ù‰"
+msgid "Options: %s"
+msgstr "Ű§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
-"يمكنك ÙƒŰ°Ù„Ùƒ ŰŁÙ† ŰȘÙ‚Ű±Ű± Ù‡Ù†Ű§ ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…ÙˆŰŹÙˆŰŻŰ© Űčلى Ű§Ù„ŰŁŰŹÙ‡ŰČŰ© Ű§Ù„ŰšŰčÙŠŰŻŰ© ŰŁÙ† "
-"ŰȘكون مŰȘÙˆÙŰ±Ű© ŰąÙ„ÙŠŰ§Ù‹ Ù„Ù‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű©."
+"ŰŁÙ†ŰȘ ŰȘŰłŰȘŰźŰŻÙ… %s ÙƒÙ…ŰŻÙŠŰ± Ű§Ù‚Ù„Ű§Űč Ű­Ű§Ù„ÙŠŰ§.\n"
+"ۧ۶ŰșŰ· Űčلى ŰȘÙ‡ÙŠŰŠŰ© لŰȘŰŽŰșيل مŰčŰ§Ù„ŰŹ Ű§Ù„Ű„Űčۯۧۯ"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
-msgstr ""
-"Ù‡Ù†Ű§ يمكنك ŰŁÙ† ŰȘŰźŰȘۧ۱ ۧ۰ۧ ÙƒŰ§Ù† ÙŠŰŹŰš Ù„Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…ŰȘŰ”Ù„Ű© ŰšÙ‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű© ŰŁÙ† ŰȘكون مŰȘÙˆÙŰ±Ű© "
-"Ù„Ù„Ù…Ű§ÙƒÙŠÙ†Ű§ŰȘ Ű§Ù„ŰŁŰźŰ±Ù‰ Űčلى Ű§Ù„ŰŽŰšÙƒŰ©."
+msgid "OKI winprinter configuration"
+msgstr "Ű„Űčۯۧۯ OKI WinPrinter"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "CUPS printer configuration"
-msgstr "Ű„ŰčۯۧۯۧŰȘ Ù…ŰŽŰ§Ű±ÙƒŰ© ۷ۧۚŰčۧŰȘ CUPS"
+#: ../../lang.pm:1
+#, c-format
+msgid "Saint Helena"
+msgstr "ŰłŰ§Ù†ŰȘ Ù‡ÙŠÙ„Ű§Ù†Ű©"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
-msgstr "Ű§Ù„ŰȘŰ­Ù‚Ù‚ Ű§Ù„ŰąÙ„ÙŠ من Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ (Ù…Ű­Ù„ÙŠŰ©, TCP/Socket, و SMB)"
+msgid "Security Level"
+msgstr "Ù…ŰłŰȘوى Ű§Ù„ŰŁÙ…Ù†"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
+"Some steps are not completed.\n"
"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
msgstr ""
+"ŰšŰč۶ Ű§Ù„ŰźŰ·ÙˆŰ§ŰȘ لم يŰȘم ŰȘكملŰȘÙ‡Ű§.\n"
"\n"
-"Ù„Ű§ ŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Űčلى ŰźŰ§ŰŻÙ…Ű§ŰȘ CUPS Ű§Ù„ŰšŰčÙŠŰŻŰ©; Ù‡Ű°Ù‡ Ű§Ù„ÙƒŰ§ŰšŰčۧŰȘ يمكن "
-"Ű§ÙƒŰȘŰŽÙ„ÙÙ‡Ű§ ŰąÙ„ÙŠŰ§Ù‹."
+"هل ŰȘŰ±ÙŠŰŻ Ű§Ù„ŰźŰ±ÙˆŰŹ Ű§Ù„ŰąÙ† فŰčÙ„Ű§Ù‹ŰŸ"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "How is the printer connected?"
-msgstr "Ù…Ű§ هي Ű·Ű±ÙŠÙ‚Ű© ŰȘÙˆŰ”ÙŠÙ„ Ű§Ù„Ű·Ű§ŰšŰčŰ©ŰŸ"
+msgid "Sudan"
+msgstr "Ű§Ù„ŰłÙˆŰŻŰ§Ù†"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Select Printer Connection"
-msgstr "ۧ۟ŰȘ۱ ÙˆŰ”Ù„Ű© Ű§Ù„Ű·Ű§ŰšŰčŰ©"
+msgid "Polish (qwertz layout)"
+msgstr "Ű§Ù„ŰšÙˆÙ„Ù†ŰŻÙŠŰ© (qwertz layout)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
+msgid "Syria"
+msgstr "ŰłÙˆŰ±ÙŠŰ©"
-#: ../../security/help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
#, c-format
msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the user umask."
-msgstr ""
-"Arguments: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
"\n"
-"Set the user umask."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (val)\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
"\n"
-"Set the shell timeout. A value of zero means no timeout."
msgstr ""
-"Arguments: (val)\n"
+"Welcome to %s the operating system chooser!\n"
+"\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
"\n"
-"Set the shell timeout. A value of zero means no timeout."
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (size)\n"
-"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-"Arguments: (size)\n"
-"\n"
-"Set shell commands history size. A value of -1 means unlimited."
+msgid "Portuguese"
+msgstr "Ű§Ù„ŰšŰ±ŰȘŰșŰ§Ù„ÙŠŰ©"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr "if set to yes, check additions/removals of sgid files."
+msgid "Loopback file name: "
+msgstr "Ű§ŰłÙ… ملف Loopback: "
-#: ../../security/help.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "if set to yes, check open ports."
-msgstr "if set to yes, check open ports."
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "ŰčÙ†ÙˆŰ§Ù† ŰźŰ§ŰŻÙ… DNS ÙŠŰŹŰš ŰŁÙ† يكون Űčلى Ű§Ù„Ù†ŰłÙ‚ 1.2.3.4"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
-"if set, send the mail report to this email address else send it to root."
+msgid "Serbia"
+msgstr "Ű”Ű±ŰšÙŠŰ§"
-#: ../../security/help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr "if set to yes, report check result by mail."
+msgid "Newzealand"
+msgstr "نيوŰČÙŠÙ„Ù†ŰŻŰ§ "
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr "if set to yes, check files/directories writable by everybody."
+msgid "This directory should remain within the root filesystem"
+msgstr "Ù‡Ű°Ű§ Ű§Ù„ŰŻÙ„ÙŠÙ„ ÙŠŰŹŰš ŰŁÙ† يكون في Ù†ŰžŰ§Ù… Ű§Ù„Ù…Ù„ÙŰ§ŰȘ Ű§Ù„ŰŹŰ°Ű±ÙŠ"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr "if set to yes, reports check result to tty."
+msgid "CapsLock key"
+msgstr "مفŰȘۭۧ CapsLock"
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr "if set to yes, run some checks against the rpm database."
+msgid "Install bootloader"
+msgstr "ŰȘŰ«ŰšÙŠŰȘ Ù…Ű­Ù…Ù‘ÙÙ„ Ű§Ù„Ű„Ù‚Ù„Ű§Űč"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr "if set to yes, check if the network devices are in promiscuous mode."
+msgid "Select the memory size of your graphics card"
+msgstr "Ű„ŰźŰȘ۱ Ű­ŰŹÙ… Ű°Ű§ÙƒŰ±Ű© ŰšŰ·Ű§Ù‚Ű© Ű§Ù„ŰŽŰ§ŰŽŰ©"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr "if set to yes, run chkrootkit checks."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
+msgstr ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
-msgstr "if set to yes, check permissions of files in the users' home."
+msgid "Dynamic IP Address Pool:"
+msgstr "Dynamic IP Address Pool:"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr "if set to yes, check additions/removals of suid root files."
+msgid "LVM name?"
+msgstr "Ű§ŰłÙ… LVM۟"
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr "if set to yes, report check result to syslog."
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
+msgstr "ŰȘمŰȘ ۧŰČŰ§Ù„Ű© ŰšŰč۶ Ű§Ù„ŰŁŰŹÙ‡ŰČŰ© في ÙŰŠŰ© Ű§Ù„ŰčŰȘۧۯ \"%s\":\n"
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
-msgstr ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
+msgid "Found %s %s interfaces"
+msgstr "ŰȘم Ű§ÙŠŰŹŰ§ŰŻ %s %s ÙˆŰ§ŰŹÙ‡Ű§ŰȘ"
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr "if set to yes, run the daily security checks"
+msgid "sticky-bit"
+msgstr "sticky-bit"
-#: ../../security/help.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr "if set to yes, verify checksum of the suid/sgid files."
+msgid "Post Install"
+msgstr "Ù…Ű§ ŰšŰčŰŻ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ"
-#: ../../security/help.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr "if set to yes, check empty password in /etc/shadow."
+msgid "The internal domain name"
+msgstr "Ű§ŰłÙ… Ű§Ù„Ù†Ű·Ű§Ù‚ Ű§Ù„ŰŻŰ§ŰźÙ„ÙŠ"
-#: ../../security/help.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "if set to yes, report unowned files."
-msgstr "if set to yes, report unowned files."
+msgid "Card IRQ"
+msgstr "Card IRQ"
#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (umask)\n"
"\n"
-"Set the root umask."
+"Set the user umask."
msgstr ""
"Arguments: (umask)\n"
"\n"
-"Set the root umask."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
-"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
-msgstr ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
-"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+"Set the user umask."
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
+msgid "logdrake"
+msgstr "logdrake"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "ۧ۟ŰȘ۱ ŰłÙˆŰ§Ù‚Ű© Ű§Ù„ŰŁÙ‚Ű±Ű§Ű” Ű§Ù„Ù…Ű±Ù†Ű© Ű§Ù„ŰȘي ŰȘŰ±ÙŠŰŻ ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡Ű§ لŰčمل Ù‚Ű±Ű” Ű§Ù„Ű„Ù‚Ù„Ű§Űč"
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
+msgid "LILO with text menu"
+msgstr "LILO مŰč Ù‚Ű§ŰŠÙ…Ű© Ù†Ű”ÙŠŰ©"
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
+msgid "Everything (no firewall)"
+msgstr "كل ŰŽŰŠ (Ù„Ű§ ۏۯۧ۱ Ù†Ű§Ű±ÙŠ)"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
+msgid "You must specify a kernel image"
+msgstr "ÙŠŰŹŰš ŰŁÙ† ŰȘŰ­ŰŻŰŻ Ű”ÙˆŰ±Ű© Ű§Ù„Ù†ÙˆŰ§Ű©"
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
+msgid ", multi-function device on USB"
+msgstr ", ŰŹÙ‡Ű§ŰČ Ù…ŰȘŰčŰŻŰŻ Ű§Ù„ÙˆŰžŰ§ŰŠÙ Űčلى Ù…Ù†ÙŰ° USB"
-#: ../../security/help.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
+msgid "Do"
+msgstr "Ű§ÙŰčل"
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ù…Ű±ŰąŰ© Ù„Ù„Ű­Ű”ÙˆÙ„ Űčلى Ù‚Ű§ŰŠÙ…Ű© ŰšŰ§Ù„Ű­ŰČم Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű©..."
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
+msgid "Lithuanian AZERTY (old)"
+msgstr "Ű§Ù„Ù„ÙŠŰȘÙˆŰ§Ù†ÙŠŰ© AZERTY (Ù‚ŰŻÙŠÙ…)"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
-msgstr ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
+msgid "Brazilian (ABNT-2)"
+msgstr "Ű§Ù„ŰšŰ±Ű§ŰČÙŠÙ„ÙŠŰ© (ABNT-2)"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
-msgstr ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
+msgid "IP address of host/network:"
+msgstr "ŰčÙ†ÙˆŰ§Ù† IP Ù„Ù„Ù…ŰłŰȘŰ¶ÙŠÙ/Ű§Ù„ŰŽŰšÙƒŰ©:"
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"Ű§Ù„Ű„Ű­ŰŻŰ§Ű«ÙŠ Ű§Ù„Ű”Ű§ŰŻÙŠ Ù„Ù„Ű±ÙƒÙ† Ű§Ù„ŰŁÙŠŰłŰ± Ű§Ù„ŰŁŰčلى\n"
+"Ù„ŰŽŰ±ÙŠŰ· Ű§Ù„ŰȘÙ‚ŰŻÙ…"
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
+msgid "System installation"
+msgstr "ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ù†ŰžŰ§Ù…"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
-msgstr ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
+msgid "Saint Vincent and the Grenadines"
+msgstr "ŰłŰ§Ù†ŰȘ ÙÙŠÙ†ŰłÙ†ŰȘ و Ű§Ù„ŰșŰ±ÙŠÙ†Ű§ŰŻÙŠÙ†"
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
+msgid "/File/_Open"
+msgstr "/ملف/_فŰȘŰ­"
#: ../../security/help.pm:1
#, c-format
@@ -12585,1075 +12460,753 @@ msgstr ""
"The argument specifies if clients are authorized to connect\n"
"to the X server on the tcp port 6000 or not."
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
-msgstr ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
+msgid "Location of auto_install.cfg file"
+msgstr "Ű§Ù„Ù…ÙƒŰ§Ù† Űčلى ملف install.cfg"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
+msgid "Open Firmware Delay"
+msgstr "Open Firmware Delay"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
+msgid "Hungary"
+msgstr "Ű§Ù„Ù…ŰŹŰ±"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse broadcasted icmp echo."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse broadcasted icmp echo."
+msgid "Total progess"
+msgstr "Ű§ŰŹÙ…Ű§Ù„ÙŠ Ű§Ù„ŰȘÙ‚ŰŻÙ…"
-#: ../../security/help.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Accept/Refuse bogus IPv4 error messages."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Accept/Refuse bogus IPv4 error messages."
+msgid "Color configuration"
+msgstr "Ű„ŰčۯۧۯۧŰȘ Ű§Ù„ŰŁÙ„ÙˆŰ§Ù†"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "Ù…ŰŻÙŠŰ± Ű§Ù„Ù†ŰžŰ§Ù… (Ű§ŰłÙ… Ű§Ù„ŰŻŰźÙˆÙ„ ŰŁÙˆ Ű§Ù„ŰšŰ±ŰŻÙŠ Ű§Ù„ŰŁÙ„ÙƒŰȘŰ±ÙˆÙ†ÙŠ)"
+msgid "New Zealand"
+msgstr "نيوŰČÙŠÙ„Ù†ŰŻŰ§"
#: ../../security/level.pm:1
#, c-format
msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr "مكŰȘۚ۩ ŰȘŰ­Ù…ÙŠ من Ù‡ŰŹÙ…Ű§ŰȘ buffer overflow و format string"
-
-#: ../../security/level.pm:1
-#, c-format
-msgid "Use libsafe for servers"
-msgstr "Ű„ŰłŰȘŰźŰŻÙ… libsafe Ù„Ù„Ù…Ù„Ù‚Ù…Ű§ŰȘ"
-
-#: ../../security/level.pm:1
-#, c-format
-msgid "Security level"
-msgstr "Ù…ŰłŰȘوى Ű§Ù„ŰŁÙ…Ù†"
+"There are already some restrictions, and more automatic checks are run every "
+"night."
+msgstr ""
+"ŰȘÙˆŰŹŰŻ ŰšŰč۶ Ű§Ù„Ù‚ÙŠÙˆŰŻ, ÙƒÙ…Ű§ يŰȘم ŰȘŰŽŰșيل ŰšŰ±Ű§Ù…ŰŹ للŰȘŰŁÙƒŰŻ من Ű§Ù„Ù†ŰžŰ§Ù… ŰŁÙˆŰȘÙˆÙ…Ű§ŰȘÙŠÙƒÙŠŰ§Ù‹ كل Ù„ÙŠÙ„Ű©."
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose the desired security level"
-msgstr "ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ Ù…ŰłŰȘوى Ű§Ù„ŰŁÙ…Ù† Ű§Ù„Ű°ÙŠ ŰȘŰ±ÙŠŰŻÙ‡"
+msgid "please choose the date to restore"
+msgstr "۱ۏۧۥ ۧ۟ŰȘ۱ ŰȘŰ§Ű±ÙŠŰź Ű§Ù„Ű„ŰłŰȘŰčۧۯ۩"
-#: ../../security/level.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DrakSec Basic Options"
-msgstr "ŰźÙŠŰ§Ű±Ű§ŰȘ DrakSec Ű§Ù„ŰŁŰłŰ§ŰłÙŠŰ©"
+msgid "Switching from ext2 to ext3"
+msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰȘŰșÙŠÙŠŰ± من ext2 Ű§Ù„Ù‰ ext3"
-#: ../../security/level.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Ù‡Ű°Ű§ Ù…Ù…Ű§Ű«Ù„ Ù„Ù„Ù…ŰłŰȘوى Ű§Ù„ŰłŰ§ŰšÙ‚, و لكن Ű§Ù„Ù†ŰžŰ§Ù… مŰșلق ÙƒÙ„ÙŠŰ§Ù‹ و Ű§Ù„Ù…ŰČŰ§ÙŠŰ§ Ű§Ù„ŰŁÙ…Ù†ÙŠ Űčلى Ű­ŰŻÙ‡Ű§ "
-"Ű§Ù„ŰŁÙ‚Ű”Ù‰."
+msgid "LPRng"
+msgstr "LPRng"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"ŰšÙ‡Ű°Ű§ Ű§Ù„Ù…ŰłŰȘوى Ű§Ù„ŰŁÙ…Ù†ÙŠ, يكون ۧ۳ŰȘŰźŰŻŰ§Ù… Ù‡Ű°Ű§ Ű§Ù„Ù†ŰžŰ§Ù… ÙƒŰźŰ§ŰŻÙ… ÙŠŰ”ŰšŰ­ Ù…Ù…ÙƒÙ†Ű§Ù‹.\n"
-"Ű§Ù„Ù…ŰłŰȘوى Ű§Ù„ŰŁÙ…Ù†ÙŠ ŰčŰ§Ù„Ù ŰšŰŽÙƒÙ„ ÙƒŰ§ÙÙŠ Ù„Ű§ŰłŰȘŰźŰŻŰ§Ù… Ù‡Ű°Ű§ Ű§Ù„Ù†ŰžŰ§Ù… ÙƒŰźŰ§ŰŻÙ… ÙŠŰłŰȘŰ·ÙŠŰč Ù‚ŰšÙˆÙ„\n"
-"ۧŰȘŰ”Ű§Ù„Ű§ŰȘ من ŰčÙ…Ù„Ű§ŰĄ ÙƒŰ«ÙŠŰ±ÙŠÙ†. Ù…Ù„Ű­ÙˆŰžŰ©: ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ù…Ű§ÙƒÙŠÙ†ŰȘك Ù…ŰŹŰ±ŰŻ Űčميل Űčلى Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ "
-"ÙŰ§Ù„ŰŁŰŹŰŻŰ± ŰšÙƒ ۧ۟ŰȘÙŠŰ§Ű± Ù…ŰłŰȘوى ŰŁÙ…Ù†ÙŠ ŰŁÙ‚Ù„."
+msgid "Netherlands Antilles"
+msgstr "ŰŁÙ†ŰȘيل Ù‡ÙˆÙ„Ù†ŰŻŰ§"
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"ŰȘÙˆŰŹŰŻ ŰšŰč۶ Ű§Ù„Ù‚ÙŠÙˆŰŻ, ÙƒÙ…Ű§ يŰȘم ŰȘŰŽŰșيل ŰšŰ±Ű§Ù…ŰŹ للŰȘŰŁÙƒŰŻ من Ű§Ù„Ù†ŰžŰ§Ù… ŰŁÙˆŰȘÙˆÙ…Ű§ŰȘÙŠÙƒÙŠŰ§Ù‹ كل Ù„ÙŠÙ„Ű©."
+msgid "Browse to new restore repository."
+msgstr "ۧ۳ŰȘŰč۱۶ Ű§Ù„Ù‰ Ù…ŰłŰȘÙˆŰŻŰč ۧ۳ŰȘŰčۧۯ۩ ŰŹŰŻÙŠŰŻ."
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
msgstr ""
-"Ù‡Ű°Ű§ هو Ű§Ù„Ù…ŰłŰȘوى Ű§Ù„ŰŁÙ…Ù†ÙŠ Ű§Ù„Ù‚ÙŠŰ§ŰłÙŠ Ù„Ù„Ű­Ű§ŰłÙˆŰš Ű§Ù„Ű°ÙŠ ŰłÙŠŰłŰȘŰźŰŻÙ… Ù„Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ كŰčميل."
+"\n"
+"ŰŁÙ‡Ù„Ű§Ù‹ ŰšÙƒÙ… في مŰčŰ§Ù„ŰŹ ۧŰčۯۧۯ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ\n"
+"\n"
+"Ù‡Ű°Ű§ Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ ÙŠŰłÙ…Ű­ لك ŰšŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…Ű­Ù„ÙŠŰ© ŰŁÙˆ Ű§Ù„ŰšŰčÙŠŰŻŰ© ليŰȘم ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡Ű§ من Ù‡Ű°Ù‡ "
+"Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ùˆ و من Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű§ŰȘ Ű§Ù„ŰŁŰźŰ±Ù‰ Űčلى Ű§Ù„ŰŽŰšÙƒŰ©.\n"
+"\n"
+"ÙŠŰłŰŁÙ„Ùƒ Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ Űčن كل Ű§Ù„Ù…ŰčÙ„ÙˆÙ…Ű§ŰȘ Ű§Ù„ŰŁŰłŰ§ŰłÙŠŰ© Ù„Ű„Űčۯۧۯ Ű§Ù„Ű·Ű§ŰšŰčŰ© و ŰȘŰčŰ·ÙŠÙƒ Ű§Ù„Ù‚ŰŻŰ±Ű© Űčلى "
+"Ű§Ù„ÙˆŰ”ÙˆÙ„ لكل Ù…ŰŽŰșÙ„Ű§ŰȘ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ و ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„Ù…ŰŽŰșÙ„Ű§ŰȘ و ŰŁÙ†ÙˆŰ§Űč ÙˆŰ”Ù„Ű§ŰȘ Ű§Ù„Ű·Ű§ŰšŰčŰ©."
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr "ÙƒÙ„Ù…Ű§ŰȘ Ű§Ù„Ù…Ű±ÙˆŰ± Ù…Ù…ÙƒÙ‘Ù†Ű© Ű§Ù„ŰąÙ†, لكن Ű§Ù„Ű§ŰłŰȘŰźŰŻŰ§Ù… ÙƒŰ­Ű§ŰłŰš في ŰŽŰšÙƒŰ© يŰČŰ§Ù„ ŰșÙŠŰ± Ù…ÙŰ¶Ù‘Ù„."
+msgid "and %d unknown printers"
+msgstr "و %d ۷ۧۚŰčۧŰȘ ŰșÙŠŰ± مŰčŰ±ÙˆÙŰ©"
-#: ../../security/level.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
msgstr ""
-"ÙŠŰŹŰš ۧ۳ŰȘŰźŰŻŰ§Ù… Ù‡Ű°Ű§ Ű§Ù„Ù…ŰłŰȘوى Ű§Ù„ŰŁÙ…Ù†ÙŠ ۭۚ۰۱. فهو ÙŠŰŹŰčل Ù†ŰžŰ§Ù…Ùƒ ŰŁŰłÙ‡Ù„ في Ű§Ù„Ű„ŰłŰȘŰźŰŻŰ§Ù…,\n"
-"لكن يمون Ű­ŰłŰ§ŰłŰ§Ù‹ ŰŹŰŻŰ§Ù‹. Ù„Ű°Ű§ Ù„Ű§ ÙŠŰŹŰš ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡ Ù„Ù…Ű§ÙƒÙŠÙ†Ű© مŰȘŰ”Ù„Ű© ŰšÙ…Ű§ÙƒÙŠÙ†Ű§ŰȘ ŰŁŰźŰ±Ù‰\n"
-"ŰŁÙˆ Ű§Ù„Ù‰ Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ. Ù„Ű§ ÙŠÙˆŰŹŰŻ ŰŻŰźÙˆÙ„ ŰšÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ±."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
-#: ../../security/level.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Paranoid"
-msgstr "Ù…Ű±ŰȘفŰč ۏۯۧ"
+msgid "No ISDN PCI card found. Please select one on the next screen."
+msgstr "لم يŰȘم Ű§ÙŠŰŹŰ§ŰŻ ŰšŰ·Ű§Ù‚Ű§ŰȘ ISDN PCI. ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ ÙˆŰ§Ű­ŰŻŰ© في Ű§Ù„ŰŽŰ§ŰŽŰ© Ű§Ù„ŰȘŰ§Ù„ÙŠŰ©."
-#: ../../security/level.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Higher"
-msgstr "Ù…Ű±ŰȘفŰč ŰŁÙƒŰ«Ű±"
+msgid "GB"
+msgstr "ŰșيŰșŰ§ŰšŰ§ÙŠŰȘ"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "High"
-msgstr "Ù…Ű±ŰȘفŰč"
+msgid "Please give a user name"
+msgstr "Ű±ŰŹŰ§ŰĄÙ‹ قم ۚۄŰč۷ۧۥ Ű§ŰłÙ… Ù…ŰłŰȘŰźŰŻÙ…"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Poor"
-msgstr "ÙÙ‚ÙŠŰ±"
+msgid "Enable CD Boot?"
+msgstr "ŰȘمكين Ű§Ù„Ű„Ù‚Ù„Ű§Űč من Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹŰŸ"
-#: ../../security/level.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Welcome To Crackers"
-msgstr "Ù…Ű±Ű­ŰšŰ§ ŰšŰ§Ù„Ù…ŰźŰȘŰ±Ù‚ÙŠÙ†"
+msgid " enter `void' for void entry"
+msgstr " enter `void' for void entry"
-#: ../../standalone/XFdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "ÙŠŰ±ŰŹÙ‰ ۧŰčۧۯ۩ ŰȘŰłŰŹÙŠÙ„ Ű§Ù„ŰŻŰźÙˆÙ„ Ű§Ù„Ù‰ %s لŰȘÙ†ŰŽÙŠŰ· Ű§Ù„ŰȘŰșÙŠÙŠŰ±Ű§ŰȘ"
+msgid "on Hard Drive"
+msgstr "Űčلى Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù‘Ù„Űš"
-#: ../../standalone/XFdrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "ÙŠŰ±ŰŹÙ‰ ŰȘŰłŰŹÙŠÙ„ Ű§Ù„ŰźŰ±ÙˆŰŹ Ű«Ù… ۧ۳ŰȘŰźŰŻÙ… Ctrl-Alt-BackSpace"
+msgid "Winmodem connection"
+msgstr "ÙˆŰ”Ù„Ű© Winmodem"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
-msgstr "/etc/hosts.allow و /etc/hosts.deny مŰčŰŻÙ‘Ű§Ù† Ù…ŰłŰšÙ‚Ű§Ù‹ - لم يŰȘم Ű§Ù„ŰȘŰșÙŠÙŠŰ±"
+msgid ""
+"\n"
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
+msgstr ""
+"\n"
+"ŰȘÙ‡Ű§Ù†ÙŠÙ†Ű§, ŰȘم ŰȘŰ«ŰšÙŠŰȘ و ŰȘÙ‡ÙŠŰŠŰ© ۷ۧۚŰčŰȘك!\n"
+"\n"
+"يمكنك Ű§Ù„Ű·ŰšŰ§ŰčŰ© ۚۧ۳ŰȘŰźŰŻŰ§Ù… ŰŁÙ…Ű± \"ۧ۷ۚŰč\" في ŰȘŰ·ŰšÙŠÙ‚Ű§ŰȘك (Űčۧۯ۩ في Ù‚Ű§ŰŠÙ…Ű© \"ملف\").\n"
+"\n"
+"ۧ۰ۧ ۣ۱ۯŰȘ Ű§Ű¶Ű§ÙŰ© ŰŁÙˆ Ű­Ű°Ù ŰŁÙˆ ۧŰčۧۯ۩ ŰȘŰłÙ…ÙŠŰ© ۷ۧۚŰčŰ©, ŰŁŰ© ۧ۰ۧ ۣ۱ۯŰȘ ŰȘŰșÙŠÙŠŰ± ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„Ű·Ű§ŰšŰčŰ© "
+"Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠŰ© (ŰŹÙˆŰŻŰ© Ű§Ù„Ű·ŰšŰ§ŰčŰ©, ŰȘŰșÙŠÙŠŰ± Ű§Ù„Ű­ŰšŰ±, ...), ۧ۟ŰȘ۱ \"Ű§Ù„Ű·Ű§ŰšŰčŰ©\" في Ù‚ŰłÙ… \"Ű§Ù„ŰčŰȘۧۯ"
+"\" في Ù…Ű±ÙƒŰČ ŰȘŰ­ÙƒÙ… Mandrake."
-#: ../../standalone/drakTermServ:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "Ù„Ű§ ۭۧۏ۩ Ű§Ù„Ù‰ Ű§Ù†ŰŽŰ§ŰĄ /etc/dhcpd.conf ŰŁÙˆÙ„Ű§Ù‹!"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Set the password history length to prevent password reuse."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Set the password history length to prevent password reuse."
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "Ű­Ű”Ù„ ŰŽŰŠ ۟۷ۣ! - هل ŰȘم ŰȘŰ«ŰšÙŠŰȘ mkisofs?"
+msgid "Now, you can run xawtv (under X Window!) !\n"
+msgstr "Ű§Ù„ŰąÙ† يمكنك ŰȘŰŽŰșيل XawTV (في Ű§Ù„ÙˆŰ§ŰŹÙ‡Ű© Ű§Ù„Ű±ŰłÙˆÙ…ÙŠŰ©!) !\n"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr "Etherboot ISO image هي %s"
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr "Ù„Ű§ ŰȘÙˆŰŹŰŻ Ù…ŰłŰ§Ű­Ű© ŰȘŰšŰŻÙŠÙ„ ÙƒŰ§ÙÙŠŰ© Ù„Ù„Ù‚ÙŠŰ§Ù… ŰšŰ§Ù„ŰȘŰ«ŰšÙŠŰȘ, ÙŰ¶Ù„Ű§Ù‹ ŰČŰŻ Ù…ŰłŰ§Ű­Ű© Ű§Ù„ŰȘŰšŰŻÙŠÙ„"
-#: ../../standalone/drakTermServ:1
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No floppy drive available!"
-msgstr "Ù„Ű§ ŰȘÙˆŰŹŰŻ ŰłÙˆŰ§Ù‚Ű© Ù‚Ű±Ű” Ù…Ű±Ù†!"
+msgid "%s on %s"
+msgstr "%s Űčلى %s"
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Floppy can be removed now"
-msgstr "يمكن ۧŰČŰ§Ù„Ű© Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…Ű±Ù† Ű§Ù„ŰąÙ†"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
+"يقوم Ù„ÙŠÙ†ÙƒŰł ۚۄۯۧ۱۩ Ű§Ù„ÙˆÙ‚ŰȘ ۭ۳ۚ ŰȘوقيŰȘ ŰșŰ±ÙŠÙ†ŰȘŰŽ Ű«Ù… يŰȘŰ±ŰŹÙ…Ù‡ Ű§Ù„Ù‰\n"
+"Ű§Ù„ŰȘوقيŰȘ Ű§Ù„Ù…Ű­Ù„ÙŠ ۭ۳ۚ Ű§Ù„Ù…Ù†Ű·Ù‚Ű© Ű§Ù„ŰČÙ…Ù†ÙŠŰ© Ű§Ù„ŰȘي ۧ۟ŰȘ۱ŰȘÙ‡Ű§. ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ű§Ù„ŰłŰ§ŰčŰ©\n"
+"Ű§Ù„ŰȘي في Ű§Ù„Ù„ÙˆŰ­Ű© Ű§Ù„Ű±ŰŠÙŠŰłÙŠŰ© Ù…Ű¶ŰšÙˆŰ·Ű© Űčلى Ű§Ù„ŰȘوقيŰȘ Ű§Ù„Ù…Ű­Ù„ÙŠ, يمكنك ۧŰČŰ§Ù„Ű© ŰȘÙ†ŰŽÙŠŰ· Ű°Ù„Ùƒ\n"
+"Űčن Ű·Ű±ÙŠÙ‚ ۧŰČŰ§Ù„Ű© Ű§Ù„ŰȘŰŁŰŽÙŠŰ± من \"۳ۧŰčŰ© Ű§Ù„ŰŹÙ‡Ű§ŰČ Ù…Ű¶ŰšÙˆŰžŰ© Űčلى ŰȘوقيŰȘ ŰșŰ±ÙŠÙ†ŰȘŰŽ\" و Ű§Ù„ŰȘي "
+"ŰłŰȘŰŹŰčل\n"
+"Ù„ÙŠÙ†ÙƒŰł يŰčلم ŰŁÙ† ۳ۧŰčŰ© Ű§Ù„Ù†ŰžŰ§Ù… و ۳ۧŰčŰ© Ű§Ù„ŰŹÙ‡Ű§ŰČ Űčلى Ù†ÙŰł Ű§Ù„ŰȘوقيŰȘ. Ù‡Ű°Ű§\n"
+"Ù…ÙÙŠŰŻ ŰčÙ†ŰŻÙ…Ű§ ŰȘŰłŰȘŰ¶ÙŠÙ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű© Ù†ŰžŰ§Ù… ŰȘŰŽŰșيل ۹۟۱ Ù…Ű«Ù„ Windows.\n"
+"\n"
+"ŰźÙŠŰ§Ű± \"ŰȘŰČŰ§Ù…Ù† ŰąÙ„ÙŠ للوقŰȘ\" ŰłÙŠÙ‚ÙˆÙ… ŰąÙ„ÙŠŰ§Ù‹ ۚ۶ۚ۷ Ű§Ù„ŰłŰ§ŰčŰ© Űčن Ű·Ű±ÙŠÙ‚\n"
+"ۧ?ŰȘŰ”Ű§Ù„ ŰšŰźŰ§ŰŻÙ… وقŰȘ ŰšŰčÙŠŰŻ Űčلى ۧ?نŰȘŰ±Ù†ŰȘ. كي ŰȘŰčمل Ù‡Ű°Ù‡ Ű§Ù„Ù…ÙŠŰČŰ©,\n"
+"ÙŠŰŹŰš ŰŁÙ† ŰȘكون Ù„ŰŻÙŠÙƒ ÙˆŰ”Ù„Ű© Ű§Ù†ŰȘŰ±Ù†ŰȘ ŰčŰ§Ù…Ù„Ű©. من ۧ?ÙŰ¶Ù„ ۧ۟ŰȘÙŠŰ§Ű± ŰźŰ§ŰŻÙ…\n"
+"Ű§Ù„ÙˆÙ‚ŰȘ ۧ?Ù‚Ű±Űš Ű§Ù„ÙŠÙƒ. Ù‡Ű°Ű§ Ű§Ù„ŰźÙŠŰ§Ű± ÙŠŰ«ŰšŰȘ ŰźŰ§ŰŻÙ… وقŰȘ\n"
+"يمكن ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡ Űčن Ű·Ű±ÙŠÙ‚ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű§ŰȘ ۧ?ŰźŰ±Ù‰ Űčلى Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ©."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Couldn't access the floppy!"
-msgstr "ŰȘŰč۰۱ Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…Ű±Ù†!"
+msgid "Which is your timezone?"
+msgstr "Ù…Ű§ هي Ù…Ù†Ű·Ù‚ŰȘك Ű§Ù„ŰČÙ…Ù†ÙŠŰ©ŰŸ"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please insert floppy disk:"
-msgstr "ÙŰ¶Ù„Ű§Ù‹ ŰŁŰŻŰźÙ„ Ù‚Ű±Ű” Ù…Ű±Ù†:"
+msgid "Guinea"
+msgstr "ŰșÙŠÙ†ÙŠŰ§"
-#: ../../standalone/drakTermServ:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Write Config"
-msgstr "Ű§ÙƒŰȘŰš Ű§Ù„Ű„ŰčۯۧۯۧŰȘ"
+msgid "The system is now connected to the Internet."
+msgstr "Ű§Ù„Ù†ŰžŰ§Ù… Ű§Ù„ŰąÙ† مŰȘŰ”Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr "Dynamic IP Address Pool:"
+msgid "South Georgia and the South Sandwich Islands"
+msgstr "ŰŹÙˆŰŹÙŠŰ§ Ű§Ù„ŰŹÙ†ÙˆŰšÙŠŰ© و ŰŹŰČ۱ ŰłŰ§Ù†ŰŻÙˆÙŠŰȘŰŽ Ű§Ù„ŰŹÙ†ÙˆŰšÙŠŰ©"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-"ŰȘم ۧ۳ŰȘ۟۱ۧۏ ŰŁŰșÙ„Űš Ù‡Ű°Ù‡ Ű§Ù„Ù‚ÙŠÙ…\n"
-"من Ű§Ù„Ù†ŰžŰ§Ù….\n"
-"يمكنك Ű§Ù„ŰȘŰčŰŻÙŠÙ„ ۧ۰ۧ ۭۧŰȘŰŹŰȘ Ù„Ű°Ù„Ùƒ."
+msgid "Japan (broadcast)"
+msgstr "Ű§Ù„ÙŠŰ§ŰšŰ§Ù† (broadcast)"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "ŰȘÙ‡ÙŠŰŠŰ© ŰźŰ§ŰŻÙ… dhcpd"
+msgid "Mozambique"
+msgstr "موŰČÙ…ŰšÙŠÙ‚"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "IP Range End:"
-msgstr "IP Range End:"
+msgid "Icon"
+msgstr "ŰŁÙŠÙ‚ÙˆÙ†Ű©"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "IP Range Start:"
-msgstr "IP Range Start:"
+msgid "Please choose what you want to backup"
+msgstr "۱ۏۧۥ ۧ۟ŰȘ۱ Ù…Ű§ ŰȘŰ±ÙŠŰŻ Ù†ŰłŰźÙ‡ ۭۧŰȘÙŠŰ§Ű·ÙŠŰ§Ù‹"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Name Servers:"
-msgstr "ŰźŰ§ŰŻÙ…Ű§ŰȘ Ű§Ù„Ű„ŰłÙ…:"
+msgid "256 colors (8 bits)"
+msgstr "256 لون (8 ŰšŰȘ)"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "Domain Name:"
-msgstr "Ű§ŰłÙ… Ű§Ù„Ù†Ű·Ű§Ù‚:"
+msgid "Read-write"
+msgstr "Ù„Ù„Ù‚Ű±Ű§ŰĄŰ© و Ű§Ù„ÙƒŰȘۧۚ۩"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Broadcast Address:"
-msgstr "ŰčÙ†ÙˆŰ§Ù† Broadcast:"
+msgid "Size: %s\n"
+msgstr "Ű§Ù„Ű­ŰŹÙ…: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Subnet Mask:"
-msgstr "Subnet Mask:"
+msgid "Hostname: "
+msgstr "Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ :"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Routers:"
-msgstr "Ű§Ù„Ù…ÙˆŰŹÙ‡Ű§ŰȘ:"
+msgid "Chunk size %s\n"
+msgstr "Ű­ŰŹÙ… Chunk %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Netmask:"
-msgstr "Netmask:"
+msgid "Build the future of Linux!"
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Subnet:"
-msgstr "Subnet:"
+msgid "Local Printer"
+msgstr "۷ۧۚŰčŰ© Ù…Ű­Ù„ÙŠŰ©"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
msgstr ""
-"ÙŠŰŹŰš ۧŰčۧۯ۩ ŰȘŰŽŰșيل Ù…ŰŻÙŠŰ± Ű§Ù„Űč۱۶ لكي يŰȘم ŰȘفŰčيل Ű§Ù„ŰȘŰșÙŠÙŠŰ±Ű§ŰȘ. \n"
-"(service dm restart - في ۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű±)"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "dhcpd Config..."
-msgstr "ŰȘÙ‡ÙŠŰŠŰ© dhcpd..."
+" ŰŹÙ…ÙŠŰč Ű§Ù„Ű­Ù‚ÙˆÙ‚ Ù…Ű­ÙÙˆŰžŰ© (C) 2001 MandrakeSoft من ŰŻÙˆŰšÙˆÙ† ŰłÙŠŰšŰ§ŰłŰȘÙŠŰ§Ù† <dupont_s"
+"\\@epita.fr>"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Delete Client"
-msgstr "Ű§Ű­Ű°Ù Ű§Ù„Űčميل"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "<-- Edit Client"
-msgstr "<-- ŰȘŰ­Ű±ÙŠŰ± Ű§Ù„Űčميل"
+msgid "ADSL connection"
+msgstr "ÙˆŰ”Ù„Ű© ADSL"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add Client -->"
-msgstr "Ű§Ű¶Ű§ÙŰ© Űčميل -->"
+msgid "No configuration, please click Wizard or Advanced.\n"
+msgstr "Ù„Ű§ ŰȘÙ‡ÙŠŰŠŰ©, ۧ۶ŰșŰ· مŰčŰ§Ù„ŰŹ ŰŁÙˆ مŰȘÙ‚ŰŻÙ….\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Allow Thin Clients"
-msgstr "Ű§ŰłÙ…Ű­ للŰčÙ…Ù„Ű§ŰĄ Ű§Ù„Ù†Ű­Ű§Ù (Thin Clients)"
+msgid "Error!"
+msgstr "۟۷ۣ ! "
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Thin Client"
-msgstr "Űčميل Ù†Ű­ÙŠÙ (Thin Client)"
+msgid "cable connection detected"
+msgstr "ŰȘم Ű§ÙƒŰȘŰŽŰ§Ù ÙˆŰ”Ù„Ű© ÙƒÙŠŰšÙ„"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No net boot images created!"
-msgstr "لم يŰȘم Ű§Ù†ŰŽŰ§ŰĄ Ű”ÙˆŰ± Ű§Ù‚Ù„Ű§Űč Űčۚ۱ Ű§Ù„ŰŽŰšÙƒŰ©!"
+msgid "Permission denied transferring %s to %s"
+msgstr "ŰȘم Ű±ÙŰ¶ Ù„Ű§ŰȘŰ”Ű±ÙŠŰ­ ŰšÙ†Ù‚Ù„ %s Ű§Ù„Ù‰ %s"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "type: %s"
-msgstr "Ű§Ù„Ù†ÙˆŰč: %s"
+msgid "/_Report Bug"
+msgstr "/_ŰȘÙ‚Ű±ÙŠŰ± ۟۷ۣ"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "<-- Del User"
-msgstr "<-- Ű§Ű­Ű°Ù Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…"
+msgid "Resize"
+msgstr "ŰȘŰșÙŠÙŠŰ± Ű§Ù„Ű­ŰŹÙ…"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add User -->"
-msgstr "Ű§Ű¶Ù Ù…ŰłŰȘŰźŰŻÙ… -->"
+msgid "Dominica"
+msgstr "ŰŻÙˆÙ…ÙŠÙ†ÙŠÙƒŰ§"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
-msgstr ""
-"!!! ŰȘŰžÙ‡Ű± ۧ۰ۧ ÙƒŰ§Ù†ŰȘ ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ± في Ù‚Ű§ŰčŰŻŰ© ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„Ù†ŰžŰ§Ù… Ù…ŰźŰȘÙ„ÙŰ©\n"
-"Űčن ŰȘلك Ű§Ù„ŰȘي Ù„Ù‚Ű§ŰčŰŻŰ© ŰšÙŠŰ§Ù†Ű§ŰȘ ŰźŰ§ŰŻÙ… Ű§Ù„Ű·Ű±ÙÙŠŰ§ŰȘ.\n"
-"Ű§Ű­Ű°Ù/ŰŁŰčŰŻ Ű§Ű¶Ű§ÙŰ© Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… Ű§Ù„Ù‰ ŰźŰ§ŰŻÙ… Ű§Ù„Ű·Ű±ÙÙŠŰ§ŰȘ لŰȘمكين ŰȘŰłŰŹÙŠÙ„ Ű§Ù„ŰŻŰźÙˆÙ„."
+msgid "Please enter the device name to use for backup"
+msgstr "ÙŰ¶Ù„Ű§Ù‹ ŰŁŰŻŰźÙ„ Ű§ŰłÙ… ŰŹÙ‡Ű§ŰČ Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Delete All NBIs"
-msgstr "Ű§Ű­Ű°Ù كل NBI"
+msgid "Resolution: %s\n"
+msgstr "ŰŻÙ‚Ű© Ű§Ù„Űč۱۶: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "<-- Delete"
-msgstr "<-- Ű­Ű°Ù"
+msgid "matching"
+msgstr "Ű§Ù„Ù…ÙˆŰ§ŰŠÙ…Ű©"
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
#, c-format
-msgid "This will take a few minutes."
-msgstr "ŰłÙŠŰłŰȘŰșŰ±Ù‚ Ù‡Ű°Ű§ ۚ۶Űč ŰŻÙ‚Ű§ŰŠÙ‚."
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
+msgstr ""
+"ŰȘŰč۰۱ Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ ÙˆŰ­ŰŻŰ§ŰȘ Ű§Ù„Ù†ÙˆŰ§Ű© Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙ†ÙˆŰ§Ű© Ű§Ù„Ù†ŰžŰ§Ù… (Ű§Ù„Ù…Ù„Ù %s Ù…ÙÙ‚ÙˆŰŻ), ŰšŰŽÙƒÙ„ ŰčŰ§Ù… "
+"يŰčني Ù‡Ű°Ű§ ŰŁÙ† Ù‚Ű±Ű” Ű§Ù„Ű„Ù‚Ù„Ű§Űč Ű§Ù„Ù…Ű±Ù† Ù„ÙŠŰł Ù…Ű­ŰŻÙ‘Ű«Ű§Ù‹ مŰč ÙˆŰłÙŠŰ· Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ (ÙŰ¶Ù„Ű§Ù‹ قم ŰšŰ„Ù†ŰŽŰ§ŰĄ Ù‚Ű±Ű” "
+"Ű§Ù‚Ù„Ű§Űč ŰŹŰŻÙŠŰŻ)"
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
-msgid "Build All Kernels -->"
-msgstr "Ű§ŰšÙ†ÙŠ كل ۧ۔ۯۧ۱ۧŰȘ Ű§Ù„Ù†ÙˆŰ§Ű© -->"
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ Ű§Ù„Ù…Ù†ÙŰ° Ű§Ù„Ű”Ű­ÙŠŰ­. Ù…Ű«Ù„Ű§Ù‹ Ù„Ù…Ù†ÙŰ° \"COM1\" في\n"
+"Windows Ű§ŰłÙ…Ù‡ \"ttys0\" في Ù„ÙŠÙ†ÙƒŰł."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "No NIC selected!"
-msgstr "لم يŰȘم ۧ۟ŰȘÙŠŰ§Ű± NIC!"
+msgid "The following packages are going to be removed"
+msgstr "ŰłÙŠŰȘم Ű­Ű°Ù Ű§Ù„Ű­ŰČم Ű§Ù„ŰȘŰ§Ù„ÙŠŰ©"
-#: ../../standalone/drakTermServ:1
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
#, c-format
-msgid "Build Single NIC -->"
-msgstr "Ű§ŰšÙ†ÙŠ NIC ÙˆŰ§Ű­ŰŻŰ© -->"
+msgid "Connect to the Internet"
+msgstr "ÙˆŰ”Ù‘Ù„ Ű„Ù„Ù‰ Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ "
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "No kernel selected!"
-msgstr "لم يŰȘم Ű§ÙŠŰŹŰ§ŰŻ Ù†ÙˆŰ§Ű©!"
+msgid "Use existing partitions"
+msgstr "ۧ۳ŰȘŰźŰŻÙ… Ű§Ù„ŰȘŰŹŰČۊۧŰȘ Ű§Ù„Ù…ÙˆŰŹÙˆŰŻŰ©"
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Build Whole Kernel -->"
-msgstr "Ű§ŰšÙ†ÙŠ كل Ű§Ù„Ù†ÙˆŰ§Ű© -->"
+msgid "Canadian (Quebec)"
+msgstr "Ű§Ù„ÙƒÙ†ŰŻÙŠÙ‘Ű© (ÙƒÙŠŰšÙŠÙƒ)"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Boot ISO"
-msgstr "ملف ISO Ű§Ù„Ű„Ù‚Ù„Ű§Űč"
+msgid "Mouse device: %s\n"
+msgstr "ŰŹÙ‡Ű§ŰČ Ű§Ù„ÙŰŁŰ±Ű©: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Boot Floppy"
-msgstr "Ù‚Ű±Ű” Ű§Ù„Ű„Ù‚Ù„Ű§Űč"
+msgid "Reselect correct fonts"
+msgstr "ŰŁŰčŰŻ ۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„ŰźŰ·ÙˆŰ· Ű§Ù„Ű”Ű­ÙŠŰ­Ű©"
-#: ../../standalone/drakTermServ:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
+"Options Description:\n"
"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
-"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
"\n"
msgstr ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
-"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
+"ÙˆŰ”Ù Ű§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ:\n"
"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"من ÙŰ¶Ù„Ùƒ كن Ű­Ű°Ű±Ű§Ù‹ ŰčÙ†ŰŻ ۧ۳ŰȘŰźŰŻŰ§Ù… Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ Űčۚ۱ FTP, Ù„ŰŁÙ† \n"
+"Ű§Ù„Ù†ŰłŰź Ű§Ù„Ù…ŰšÙ†ÙŠŰ© Ù…ŰłŰšÙ‚Ű§Ù‹ ÙÙ‚Ű· هي Ű§Ù„ŰȘي يŰȘم Ű§Ű±ŰłŰ§Ù„Ù‡Ű§ Ű§Ù„Ù‰ Ű§Ù„ŰźŰ§ŰŻÙ….\n"
+"Ù„Ű°Ű§ ÙŰ§Ù„ŰąÙ† Űčليك ŰŁÙ† ŰȘŰšÙ†ÙŠ Ű§Ù„Ù†ŰłŰźŰ© Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠŰ© Űčلى Ű§Ù„Ù‚Ű±Ű” \n"
+"Ű§Ù„Ű”Ù„Űš Ù‚ŰšÙ„ Ű§Ű±ŰłŰ§Ù„Ù‡Ű§ Ű§Ù„Ù‰ Ű§Ù„ŰźŰ§ŰŻÙ….\n"
"\n"
-#: ../../standalone/drakTermServ:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"Options\n"
"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
-"\n"
-"\n"
-" ŰŽÙƒŰ± ۟ۧ۔:\n"
-"\t- Ù…ŰŽŰ±ÙˆŰč LTSP http://www.ltsp.org\n"
-"\t- Ù…Ű§ÙŠÙƒÙ„ ŰšŰ±Ű§ÙˆÙ† <mbrown\\@fensystems.co.uk>\n"
-"\n"
+"في Ű§Ù„Ù†Ù‡Ű§ÙŠŰ©, ŰłÙŠŰȘم ŰłŰ€Ű§Ù„Ùƒ Űčن ۧ۰ۧ كنŰȘ ŰȘŰ±ÙŠŰŻ ۚۯۥ Ű§Ù„ÙˆŰ§ŰŹÙ‡Ű© Ű§Ù„Ű±ŰłÙˆÙ…ÙŠŰ©\n"
+"ŰčÙ†ŰŻ ۚۯۥ Ű§Ù„Ù†ŰžŰ§Ù…. Ù„Ű§Ű­Ű· ŰŁÙ†Ù‡ ŰłÙŠŰȘم ŰłŰ€Ű§Ù„Ùƒ Ù‡Ű°Ű§ Ű§Ù„ŰłŰ€Ű§Ù„ Ű­ŰȘى لو ۧ۟ŰȘ۱ŰȘ ŰčŰŻÙ… ۧ۟ŰȘۚۧ۱\n"
+"Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ©, ŰšÙƒÙ„ ÙˆŰ¶ÙˆŰ­, ŰłŰȘŰźŰȘۧ۱ \"Ù„Ű§\" ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ù…Ű§ÙƒÙŠÙ†ŰȘك ŰłŰȘŰłŰȘŰźŰŻÙ… ÙƒŰŹÙ‡Ű§ŰČ\n"
+"ŰźŰ§ŰŻÙ…, ŰŁÙˆ ۧ۰ۧ لم ŰȘÙ†ŰŹŰ­ في ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Űč۱۶\n"
+"ŰšŰŽÙƒÙ„ Ű”Ű­ÙŠŰ­."
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
-msgstr ""
-"\n"
-" ŰŹÙ…ÙŠŰč Ű§Ù„Ű­Ù‚ÙˆÙ‚ Ù…Ű­ÙÙˆŰžŰ© (C) 2002 لـMandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
+msgid "We are now going to configure the %s connection."
+msgstr "Ù†Ű­Ù† Ű§Ù„ŰąÙ† ŰłÙ†Ù‚ÙˆÙ… ŰšŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ÙˆŰ”Ù„Ű© %s."
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Add/Del Clients"
-msgstr "ŰŁŰ¶Ù/Ű§Ű­Ű°Ù Ű§Ù„ŰčÙ…Ù„Ű§ŰĄ"
+msgid "MandrakeExpert Corporate"
+msgstr "MandrakeExpert Ù„Ù„ŰŽŰ±ÙƒŰ§ŰȘ"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Add/Del Users"
-msgstr "ŰŁŰ¶Ù/Ű§Ű­Ű°Ù Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…ÙŠÙ†"
+msgid ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
+msgstr ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Write protection"
+msgstr "ŰȘŰ­Ù‚Ù‚ ŰąÙ„ÙŠ من Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "You've not selected any font"
+msgstr "لم ŰŁŰȘمكن من Ű„ÙŠŰŹŰ§ŰŻ ŰŁÙŠ ۟۷.\n"
+
+#: ../../steps.pm:1
#, c-format
-msgid "Net Boot Images"
-msgstr "Ű”ÙˆŰ± Ű§Ù‚Ù„Ű§Űč Ű§Ù„ŰŽŰšÙƒŰ©"
+msgid "Language"
+msgstr "ۧ۟ŰȘ۱ لŰșŰȘك"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "Etherboot Floppy/ISO"
+msgid "Printer model selection"
+msgstr "Ű„ŰźŰȘÙŠŰ§Ű± ÙˆŰ­ŰŻŰ§ŰȘ Ű§Ù„Ű·Ű§ŰšŰčŰ©"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Stop Server"
-msgstr "ŰŁÙˆÙ‚Ù Ű§Ù„ŰźŰ§ŰŻÙ…"
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
+msgstr "ŰšŰčŰŻ ŰȘŰșÙŠÙŠŰ± نوŰč Ű§Ù„ŰȘŰŹŰČŰŠŰ© %s, ÙŰ„Ù†Ùƒ ŰłŰȘ۳۟۱ كل Ű§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ Űčلى Ű§Ù„ŰȘŰŹŰČŰŠŰ©"
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
#, c-format
-msgid "Start Server"
-msgstr "ۧۚۯۣ Ű§Ù„ŰźŰ§ŰŻÙ…"
+msgid "%d seconds"
+msgstr "%d Ű«ÙˆŰ§Ù†"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Disable Server"
-msgstr "ŰčŰ·Ù‘Ù„ Ű§Ù„ŰźŰ§ŰŻÙ…"
+msgid "Insert a blank floppy in drive %s"
+msgstr "ŰŁŰŻŰźÙ„ Ù‚Ű±Ű” Ù…Ű±Ù† ÙŰ§Ű±Űș في Ű§Ù„ŰłÙˆŰ§Ù‚Ű© %s"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Enable Server"
-msgstr "مكّن Ű§Ù„ŰźŰ§ŰŻÙ…"
+msgid "A valid URI must be entered!"
+msgstr "ÙŠŰŹŰš Ű§ŰŻŰźŰ§Ù„ URI Ű”Ű§Ù„Ű­!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "ŰȘÙ‡ÙŠŰŠŰ© ŰźŰ§ŰŻÙ… Ű·Ű±ÙÙŠŰ§ŰȘ Mandrake"
+msgid "Found \"%s\" interface do you want to use it ?"
+msgstr "ŰȘم Ű§ÙŠŰŹŰ§ŰŻ Ű§Ù„ÙˆŰ§ŰŹÙ‡Ű© \"%s\" هل ŰȘŰ±ÙŠŰŻ ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡Ű§ŰŸ"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Remove the last item"
-msgstr "Ű§Ű­Ű°Ù Ű§Ù„Ù…Ű§ŰŻŰ© Ű§Ù„ŰŁŰźÙŠŰ±Ű©"
+msgid "Re-configure interface and DHCP server"
+msgstr "Ű„Űčۧۯ۩ Ű„Űčۯۧۯ Ű§Ù„ÙˆŰ§ŰŹÙ‡Ű© و ŰźŰ§ŰŻÙ… DHCP"
-#: ../../standalone/drakautoinst:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Add an item"
-msgstr "ŰŁŰ¶Ù Ù…Ű§ŰŻŰ©"
+msgid "Sound configuration"
+msgstr "ۧŰčۯۧۯۧŰȘ Ű§Ù„Ű”ÙˆŰȘ"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Auto Install"
-msgstr "ŰȘŰ«ŰšÙŠŰȘ ŰąÙ„ÙŠ"
+msgid "Photo test page"
+msgstr "Ű”ÙŰ­Ű© ۧ۟ŰȘŰšŰ§Ű±ÙŠŰ© Ù„Ű”ÙˆŰ±Ű©"
-#: ../../standalone/drakautoinst:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"ŰȘم ŰȘÙˆÙ„ÙŠŰŻ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…Ű±Ù† ŰšÙ†ŰŹŰ§Ű­.\n"
-"يمكنك Ű§Ù„ŰąÙ† ۧŰčۧۯ۩ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ."
+msgid "Custom disk partitioning"
+msgstr "ŰȘŰŹŰČŰŠŰ© Ù…ŰźŰ”Ű”Ű©"
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congratulations!"
-msgstr "ŰȘÙ‡Ű§Ù†ÙŠÙ†Ű§!"
+msgid "Enter Printer Name and Comments"
+msgstr "ŰŁŰŻŰźÙ„ Ű§ŰłÙ… Ű§Ù„Ű·Ű§ŰšŰčŰ© و Ű§Ù„ŰȘŰčÙ„ÙŠÙ‚Ű§ŰȘ"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"The following printers\n"
"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
+"Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„ŰȘŰ§Ù„ÙŠŰ©\n"
"\n"
-"ŰŁÙ‡Ù„Ű§Ù‹ ŰšÙƒÙ….\n"
-"\n"
-"مŰčŰ§ÙˆÙ…Ù„Ű§ŰȘ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„ŰąÙ„ÙŠ Ù…ÙˆŰŹÙˆŰŻŰ© Űčلى Ű§Ù„Ù‚ŰłÙ… Ű§Ù„ŰŁÙŠŰłŰ±"
+"%s%s\n"
+"مŰȘŰ”Ù„Ű© Ù…ŰšŰ§ŰŽŰ±Ű©Ù‹ ŰšÙ†ŰžŰ§Ù…Ùƒ"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Creating auto install floppy"
-msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù†ŰŽŰ§ŰĄ Ù‚Ű±Ű” Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„ŰąÙ„ÙŠ"
+msgid "type: %s"
+msgstr "Ű§Ù„Ù†ÙˆŰč: %s"
-#: ../../standalone/drakautoinst:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "manual"
-msgstr "ÙŠŰŻÙˆÙŠ"
+msgid "Slovakian (QWERTY)"
+msgstr "Ű§Ù„ŰłÙ„ÙˆÙŰ§ÙƒÙŠŰ© (QWERTY)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/draksound:1
#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ لكل ŰźŰ·ÙˆŰ© ۧ۰ۧ كنŰȘ ŰłŰȘقوم ۚۄŰčۧۯŰȘÙ‡Ű§ ŰąÙ„ÙŠŰ§Ù‹ ŰŁÙ… ŰŁÙ†Ùƒ ŰȘŰ±ÙŠŰŻ ŰŁÙ† يكون Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ "
-"ŰšŰŽÙƒÙ„ ÙŠŰŻÙˆÙŠ."
+msgid "No Sound Card detected!"
+msgstr "لم يŰȘم ۧ۟ŰȘÙŠŰ§Ű± ŰšŰ·Ű§Ù‚Ű© Ű”ÙˆŰȘ"
-#: ../../standalone/drakautoinst:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "ŰȘÙ‡ÙŠŰŠŰ© ŰąÙ„ÙŠŰ© Ù„Ù„ŰźŰ·ÙˆŰ§ŰȘ"
+msgid "Mouse Port"
+msgstr "Ù…Ù†ÙŰ° Ű§Ù„ÙŰŁŰ±Ű©"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "replay"
-msgstr "ۧŰčۧۯ۩"
+msgid ""
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
+msgstr ""
+"ÙŠŰŹŰš ۧŰčۧۯ۩ ŰȘŰŽŰșيل Ù…ŰŻÙŠŰ± Ű§Ù„Űč۱۶ لكي يŰȘم ŰȘفŰčيل Ű§Ù„ŰȘŰșÙŠÙŠŰ±Ű§ŰȘ. \n"
+"(service dm restart - في ۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű±)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Ftp Server"
+msgstr "Ű§Ù„ŰźŰ§ŰŻÙ… FTP"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+"Arguments: (arg)\n"
"\n"
-"Do you want to continue?"
+"Enable/Disable msec hourly security check."
msgstr ""
-"ŰŁÙ†ŰȘ Űčلى ÙˆŰŽÙƒ ŰȘÙ‡ÙŠŰŠŰ© Ù‚Ű±Ű” للŰȘŰ«ŰšÙŠŰȘ Ű§Ù„ŰąÙ„ÙŠ. Ù‡Ű°Ù‡ Ű§Ù„Ù…ÙŠŰČŰ© ۟۷۱۩ ŰšŰč۶ Ű§Ù„ŰŽŰŠ و ÙŠŰŹŰš "
-"ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡Ű§ ۭۚ۰۱.\n"
-"\n"
-"ŰšÙ‡Ű°Ù‡ Ű§Ù„Ù…ÙŠŰČŰ© يمكنك ۧŰčۧۯ۩ Űčمل Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ű°ÙŠ قمŰȘ ŰšÙ‡ Űčلى Ù‡Ű°Ű§ Ű§Ù„ÙƒÙ…ŰšÙŠÙˆŰȘ۱, مŰč ŰȘÙ†ŰšÙŠÙ‡Ùƒ "
-"Ù„ŰšŰč۶ Ű§Ù„ŰźŰ·ÙˆŰ§ŰȘ Ű§Ù„ŰȘي ÙŠŰŹŰš Űčليك ÙÙŠÙ‡Ű§ ŰȘŰșÙŠÙŠŰ± Ű§Ù„Ù‚ÙŠÙ…, Ű­ŰȘى ŰȘŰȘمكن من ŰȘŰșÙŠÙŠŰ±Ù‡Ű§.\n"
-"\n"
-"Ù„ŰŁÙ‚Ű”Ù‰ Ű­ŰŻ من Ű§Ù„ŰŁÙ…Ű§Ù†, ŰłŰȘŰȘم ŰȘŰŹŰČŰŠŰ© و ŰȘŰŹÙ‡ÙŠŰČ Ű§Ù„ŰŁÙ‚Ű±Ű§Ű” Ű§Ù„Ű”Ù„ŰšŰ© ŰšŰŽÙƒÙ„ ŰąÙ„ÙŠ, Ù…Ű«Ù„Ù…Ű§ ۧ۟ŰȘ۱ŰȘ "
-"ŰŁŰ«Ù†Ű§ŰĄ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ Űčلى Ù‡Ű°Ű§ Ű§Ù„ÙƒÙ…ŰšÙŠÙˆŰȘ۱.\n"
+"Arguments: (arg)\n"
"\n"
-"هل ŰȘŰ±ÙŠŰŻ Ű§Ù„Ù…ŰȘۧۚŰčŰ©ŰŸ"
+"Enable/Disable msec hourly security check."
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "ۣۯۧ۩ ۧŰčۯۧۯ Ű§Ù„Ù…Ű«ŰšÙ‘ŰȘ Ű§Ù„ŰąÙ„ÙŠ"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "%s fonts conversion"
+msgstr "ŰȘŰ­ÙˆÙŠÙ„ ŰźŰ·ÙˆŰ· pfm"
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Ù„Ű§ يمكنني Ű§ÙŠŰŹŰ§ŰŻ ملف Ű§Ù„Ű”ÙˆŰ±Ű© `%s'."
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the type of bus on which the mouse is connected"
+msgstr "نوŰč Ű§Ù„Ù€bus Ű§Ù„Ù…Ű±ŰȘۚ۷۩ ŰšÙ‡ Ű§Ù„ÙŰŁŰ±Ű©"
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
#, c-format
-msgid "Error!"
-msgstr "۟۷ۣ ! "
+msgid "Uganda"
+msgstr "ŰŁÙˆŰșÙ†ŰŻŰ§"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (size)\n"
"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
+"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
+"Arguments: (size)\n"
"\n"
-"Ù…ŰŽŰ§ÙƒÙ„ ۧ۳ŰȘŰčۧۯ۩ Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠŰ©:\n"
-"\n"
-"ŰŁŰ«Ù†Ű§ŰĄ ŰźŰ·ÙˆŰ© Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ, ŰłÙŠÙ‚ÙˆÙ… Drakbackup ŰšŰ§Ù„ŰȘŰŁÙƒŰŻ من كل Ù…Ù„ÙŰ§ŰȘ\n"
-"Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ Ù‚ŰšÙ„ ۧ۳ŰȘŰčۧۯŰȘÙ‡Ű§.\n"
-"Ù‚ŰšÙ„ Ű§Ù„Ű„ŰłŰȘŰčۧۯ۩ ŰłÙŠÙ‚ÙˆÙ… drakbackup ŰšŰ­Ű°Ù \n"
-"Ű§Ù„ŰŻÙ„ÙŠÙ„ Ű§Ù„ŰŁŰ”Ù„ÙŠ و ŰłŰȘ۟۳۱ كل Ű§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„ŰȘي \n"
-"Űčليه. من Ű§Ù„Ù…Ù‡Ù… ŰŁÙ† ŰȘكون Ű­Ű°Ű±Ű§Ù‹ و Ù„Ű§ ŰȘقوم ŰšŰȘŰčŰŻÙŠÙ„ \n"
-"ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ ÙŠŰŻÙˆÙŠŰ§Ù‹.\n"
+"Set shell commands history size. A value of -1 means unlimited."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"options description:\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
"\n"
-msgstr ""
-"ÙˆŰ”Ù Ű§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ:\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
"\n"
-"من ÙŰ¶Ù„Ùƒ كن Ű­Ű°Ű±Ű§Ù‹ ŰčÙ†ŰŻ ۧ۳ŰȘŰźŰŻŰ§Ù… Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ Űčۚ۱ FTP, Ù„ŰŁÙ† \n"
-"Ű§Ù„Ù†ŰłŰź Ű§Ù„Ù…ŰšÙ†ÙŠŰ© Ù…ŰłŰšÙ‚Ű§Ù‹ ÙÙ‚Ű· هي Ű§Ù„ŰȘي يŰȘم Ű§Ű±ŰłŰ§Ù„Ù‡Ű§ Ű§Ù„Ù‰ Ű§Ù„ŰźŰ§ŰŻÙ….\n"
-"Ù„Ű°Ű§ ÙŰ§Ù„ŰąÙ† Űčليك ŰŁÙ† ŰȘŰšÙ†ÙŠ Ű§Ù„Ù†ŰłŰźŰ© Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠŰ© Űčلى Ű§Ù„Ù‚Ű±Ű” \n"
-"Ű§Ù„Ű”Ù„Űš Ù‚ŰšÙ„ Ű§Ű±ŰłŰ§Ù„Ù‡Ű§ Ű§Ù„Ù‰ Ű§Ù„ŰźŰ§ŰŻÙ….\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
"\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"Description:\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
+"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
msgstr ""
-"Description:\n"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Comoros"
+msgstr "ŰŹŰČ۱ Ű§Ù„Ù‚Ù…Ű±"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid ""
"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
+"We are now going to configure the %s connection.\n"
"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"Press OK to continue."
+msgstr ""
"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
"\n"
"\n"
+"Ù†Ű­Ù† Ű§Ù„ŰąÙ† ŰłÙ†Ù‚ÙˆÙ… ŰšŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ÙˆŰ”Ù„Ű© %s.\n"
+"\n"
+"ۧ۶ŰșŰ· Ù…ÙˆŰ§ÙÙ‚ للمŰȘۧۚŰčŰ©."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
-msgstr ""
-" ŰȘŰ­ŰŻÙŠŰ«Ű§ŰȘ 2002 MandrakeSoft من Stew Benedict <sbenedict\\@mandrakesoft.com>"
+msgid "Yaboot mode"
+msgstr "ÙˆŰ¶Űč Yaboot"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
+msgstr "Ű§Ù„ÙˆÙ„Ű§ÙŠŰ§ŰȘ Ű§Ù„Ù…ŰȘÙ‘Ű­ŰŻŰ© Ű§Ù„ŰŁÙ…Ű±ÙŠÙƒÙŠÙ‘Ű© (cable)"
+
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
-" ŰŹÙ…ÙŠŰč Ű§Ù„Ű­Ù‚ÙˆÙ‚ Ù…Ű­ÙÙˆŰžŰ© (C) 2001 MandrakeSoft من ŰŻÙˆŰšÙˆÙ† ŰłÙŠŰšŰ§ŰłŰȘÙŠŰ§Ù† <dupont_s"
-"\\@epita.fr>"
+"ŰȘŰč۰۱ŰȘ ۧŰčۧۯ۩ ŰȘŰŽŰșيل LiLo!\n"
+"ŰŽŰșّل \"lilo\" ÙƒÙ…ŰłŰȘŰźŰŻÙ… ۏ۰۱ في ۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű± و ŰŁÙƒÙ…Ù„ ŰȘŰ«ŰšÙŠŰȘ ŰłÙ…Ű§ŰȘ LiLo."
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Generic 3 Button Mouse"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Select another media to restore from"
+msgstr "ۧ۟ŰȘ۱ ÙˆŰłÙŠŰ· ۹۟۱ Ù„Ù„Ű§ŰłŰȘŰčۧۯ۩ منه"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Software Manager"
+msgstr "Ù…ŰŻÙŠŰ± Ű§Ù„ŰšŰ±Ű§Ù…ŰŹ"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"restore description:\n"
+"Restore Description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
@@ -13665,17 +13218,19 @@ msgid ""
"\n"
" - Incremental Backups:\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
msgstr ""
"restore description:\n"
@@ -13703,5009 +13258,5520 @@ msgstr ""
"\n"
"\n"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" ŰšŰč۶ ۣ۟۷ۧۥ sendmail يكون ŰłŰšŰšÙ‡Ű§ \n"
-" ŰȘÙ‡ÙŠŰŠŰ© ŰłÙŠŰŠŰ© من postfix. Ù„Ű­Ù„ Ù‡Ű°Ű§ Ű§Ù„Ù…ŰŽÙƒÙ„Ű© Űčليك\n"
-" ŰȘŰčيين myhostname ŰŁÙˆ mydomain في ملف /etc/postfix/main.cf\n"
-"\n"
+msgid "Re-submit"
+msgstr "Ű„Űčۧۯ۩ ŰȘŰłÙ„ÙŠÙ…"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
+msgid "CD in place - continue."
+msgstr "Ű§Ù„Ù‚Ű±Ű” في Ű§Ù„Ù…ÙƒŰ§Ù† Ű§Ù„Ű”Ű­ÙŠŰ­ - ŰȘۧۚŰč"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Drakbackup"
-msgstr "Drakbackup"
+msgid "KB"
+msgstr "ÙƒÙŠÙ„ÙˆŰšŰ§ÙŠŰȘ"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restore"
-msgstr "ۧ۳ŰȘŰčۧۯ۩"
+msgid "Network & Internet"
+msgstr "Ű§Ù„ŰŽŰšÙƒŰ© و Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup Now"
-msgstr "قم ŰšŰ§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ Ű§Ù„ŰąÙ†"
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Ű§Ù„Ù„ÙŠŰȘÙˆŰ§Ù†ÙŠŰ© \"Ű”ÙˆŰȘي\" QWERTY"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Advanced Configuration"
-msgstr "Ű„Űčۯۧۯ مŰȘÙ‚ŰŻÙ…"
+msgid "Net Boot Images"
+msgstr "Ű”ÙˆŰ± Ű§Ù‚Ù„Ű§Űč Ű§Ù„ŰŽŰšÙƒŰ©"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Wizard Configuration"
-msgstr "Ű„ŰčۯۧۯۧŰȘ Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ"
+msgid "Sharing of local scanners"
+msgstr "Ù…ŰŽŰ§Ű±ÙƒŰ© Ű§Ù„Ù…Ű§ŰłŰ­Ű§ŰȘ Ű§Ù„Ű¶ÙˆŰŠÙŠŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ©"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "View Backup Configuration."
-msgstr "ۧŰč۱۶ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ"
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr "ŰȘŰč۰۱ Ű§Ù„ŰȘŰŁÙƒŰŻ من ÙˆŰŹÙˆŰŻ Plug 'n Play. ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ Ű§Ù„ŰŽŰ§ŰŽŰ© Ű§Ù„Ű”Ű­ÙŠŰ­Ű©"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Backup Now from configuration file"
-msgstr "قم ŰšŰ§Ù„Ù†ŰłŰź Ű§Ù„ŰąÙ† من ملف Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ©"
+msgid "Services and deamons"
+msgstr "Ű§Ù„ŰźŰŻÙ…Ű§ŰȘ و Ű§Ù„Ù…Ű±Ű§Ù‚ŰšŰ§ŰȘ"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Drakbackup Configuration"
-msgstr "Ű„ŰčۯۧۯۧŰȘ Drakbackup"
+msgid "Remote host name missing!"
+msgstr "Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ Ű§Ù„ŰšŰčÙŠŰŻ Ù…ÙÙ‚ÙˆŰŻ!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Total Progress"
-msgstr "Ű§ŰŹÙ…Ű§Ù„ÙŠ Ű§Ù„ŰȘÙ‚ŰŻÙ…"
+msgid "with /usr"
+msgstr "مŰč /usr"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sending files..."
-msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ű±ŰłŰ§Ù„ Ű§Ù„Ù…Ù„ÙŰ§ŰȘ..."
+msgid "Network"
+msgstr "Ű§Ù„ŰŽŰšÙƒŰ©"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "files sending by FTP"
-msgstr "Ű§Ű±ŰłŰ§Ù„ Ű§Ù„Ù…Ù„ÙŰ§ŰȘ Űčن Ű·Ű±ÙŠÙ‚ FTP"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgstr "ŰȘŰ­Ù‚Ù‘Ù‚ ŰąÙ„ÙŠŰ§Ù‹ من Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…ÙˆŰ”ÙˆÙ„Ű© ŰšÙ…Ű§ÙƒÙŠÙ†Ű§ŰȘ ŰȘŰčمل Űčلى Microsoft Windows"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup other files"
-msgstr "Ű§Ù†ŰłŰź Ù…Ù„ÙŰ§ŰȘ ŰŁŰźŰ±Ù‰"
+msgid "This password is too simple"
+msgstr "ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ± Ù‡Ű°Ù‡ ŰšŰłÙŠŰ·Ű© ۏۯۧ"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup user files"
-msgstr "Ű§Ù†ŰłŰź Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…"
+msgid "Slovakian (QWERTZ)"
+msgstr "Ű§Ù„ŰłÙ„ÙˆÙŰ§ÙƒÙŠŰ© (QWERTZ)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "Backup system files"
-msgstr "Ű§Ù†ŰłŰź Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ù†ŰžŰ§Ù…"
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Under Devel ... please wait."
-msgstr "ŰȘŰ­ŰȘ Ű§Ù„ŰȘŰ·ÙˆÙŠŰ± ... Ű§Ù†ŰȘ۞۱ ÙŰ¶Ù„Ű§"
+msgid "Truly minimal install (especially no urpmi)"
+msgstr "ŰȘŰ«ŰšÙŠŰȘ Ù…Ű”ŰșÙ‘Ű± فŰčÙ„Ű§Ù‹ (ŰźŰ”ÙˆŰ”Ű§Ù‹ ŰšŰŻÙˆÙ† urpmi)"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+" Transfer \n"
+"Now"
msgstr ""
-"لم يŰȘم Ű§ÙŠŰŹŰ§ŰŻ ملف ŰȘÙ‡ÙŠŰŠŰ© \n"
-"ÙŰ¶Ù„Ű§ ۧ۶ŰșŰ· مŰčŰ§Ù„ŰŹ Ù„ŰŁÙˆ مŰȘÙ‚ŰŻÙ…."
+" Ű§Ù†Ù‚Ù„ \n"
+"Ű§Ù„ŰąÙ†"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please select data to backup..."
-msgstr "۱ۏۧۥ ۧ۟ŰȘ۱ Ű§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„Ù…Ű·Ù„ÙˆŰš Ù†ŰłŰźÙ‡Ű§ ۭۧŰȘÙŠŰ§Ű·ÙŠŰ§..."
+msgid "Use daemon"
+msgstr "ۧ۳ŰȘŰźŰŻÙ… Ű§Ù„Ù…Ű±Ű§Ù‚Űš"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
#, c-format
-msgid "Please select media for backup..."
-msgstr "۱ۏۧۥ ۧ۟ŰȘ۱ ÙˆŰłÙŠŰ· Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ..."
+msgid "Authentication"
+msgstr "Ű§Ù„ŰȘŰ­Ù‚Ù‚"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please select data to restore..."
-msgstr "۱ۏۧۥ ۧ۟ŰȘ۱ ŰȘŰ§Ű±ÙŠŰź Ű§Ù„Ű„ŰłŰȘŰčۧۯ۩..."
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgstr "ŰŁŰ¶Ù Ù‡Ű°Ù‡ Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„Ù‰ Star Office/OpenOffice.org/GIMP"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "ÙŠŰŹŰš ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ű­ŰČم Ű§Ù„ŰȘŰ§Ù„ÙŠŰ©:\n"
+msgid "Additional CUPS servers: "
+msgstr "ŰźŰ§ŰŻÙ…Ű§ŰȘ CUPS Ű§Ù„Ű„Ű¶Ű§ÙÙŠŰ©: "
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
-"۟۷ۣ ŰŁŰ«Ù†Ű§ŰĄ Ű§Ű±ŰłŰ§Ù„ Ű§Ù„Ù…Ù„Ù ŰčÙŠŰ± FTP.\n"
-" ÙŰ¶Ù„Ű§Ù‹ قم ŰšŰȘŰ”Ű­ÙŠŰ­ ۧŰčۯۧۯۧŰȘ FTP."
+"ۧ۟ŰȘ۱ ÙˆŰ§Ű­ŰŻŰ© من Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„ŰȘي ŰȘم Ű§Ù„ŰȘŰ­Ù‚Ù‚ Ù…Ù†Ù‡Ű§ ŰąÙ„ÙŠŰ§Ù‹ من Ű§Ù„Ù‚Ű§ŰŠÙ…Ű© ŰŁÙˆ ŰŁŰŻŰźÙ„ Ű§ŰłÙ… "
+"Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ ŰŁÙˆ Ű±Ù‚Ù… IP و Ű±Ù‚Ù… Ű§Ù„Ù…Ù†ÙŰ° Ű§Ù„Ű„ŰźŰȘÙŠŰ§Ű±ÙŠ (Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠ هو 9100) في Ű­Ù‚ÙˆÙ„ "
+"Ű§Ù„Ű„ŰŻŰźŰ§Ù„."
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount %s?"
+msgstr "ŰŁÙŠÙ† ŰȘŰ±ÙŠŰŻ ŰȘŰ­Ù…ÙŠÙ„ Ű§Ù„ŰŹÙ‡Ű§ŰČ %s۟"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Restore Via Network"
+msgstr "ۧ۳ŰȘŰčۧۯ۩ Űčن Ű·Ű±ÙŠÙ‚ Ű§Ù„ŰŽŰšÙƒŰ©"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Algeria"
+msgstr "Ű§Ù„ŰŹŰČۧۊ۱"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd-size"
+msgstr "Ű­ŰŹÙ… Initrd"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
-"۟۷ۣ ŰŁŰ«Ù†Ű§ŰĄ Ű§Ű±ŰłŰ§Ù„ Ű§Ù„ŰšŰ±ÙŠŰŻ.\n"
-" لم يŰȘم Ű§Ű±ŰłŰ§Ù„ ŰȘÙ‚Ű±ÙŠŰ± Ű§Ù„ŰšŰ±ÙŠŰŻ.\n"
-" ÙŰ¶Ù„Ű§Ù‹ قم ۚۄŰčۯۧۯ sendmail"
+"ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ù‡Ù†Ű§Ùƒ ŰźŰ§ŰŻÙ…Ű§ŰȘ Ù…ŰźŰȘÙ„ÙŰ© Ù„Ù„ŰšŰ·Ű§Ù‚Ű© Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙƒ, مŰč ŰŁÙˆ\n"
+"ŰŻÙˆÙ† ŰȘŰłŰ±ÙŠŰč Ù„Ù„Ű±ŰłÙˆÙ… Ű«Ù„Ű§Ű«ÙŠŰ© Ű§Ù„ŰŁŰšŰčۧۯ, يمكنك ۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„ŰźŰ§ŰŻÙ… Ű§Ù„Ű°ÙŠ\n"
+"ÙŠÙ†Ű§ŰłŰš ۭۧŰȘÙŠŰ§ŰŹŰ§ŰȘك."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Next"
-msgstr "Ű§Ù„ŰȘŰ§Ù„ÙŠ"
+msgid "\tBackups use tar and gzip\n"
+msgstr "\tŰ§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠŰ© ŰȘŰłŰȘŰźŰŻÙ… tar و gzip\n"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Previous"
-msgstr "Ű§Ù„ŰłŰ§ŰšÙ‚"
+msgid "2 MB"
+msgstr "2 ميŰșŰ§ŰšŰ§ÙŠŰȘ"
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Save"
-msgstr "Ű­ÙŰž"
+msgid ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build Backup"
-msgstr "Ű§ŰšÙ†ÙŠ Ű§Ù„Ù†ŰłŰźŰ© Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠŰ©"
+msgid "Setting Default Printer..."
+msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰčيين Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠŰ©..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Restore Progress"
-msgstr "ŰȘÙ‚ŰŻÙ… Ű§Ù„Ű„ŰłŰȘŰčۧۯ۩"
+msgid "Interface %s (using module %s)"
+msgstr "Ű§Ù„ÙˆŰ§ŰŹÙ‡Ű© %s (ۚۧ۳ŰȘŰźŰŻŰ§Ù… Ű§Ù„ÙˆŰ­ŰŻŰ© %s)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Restore From Catalog"
-msgstr "ۧ۳ŰȘŰčۧۯ۩ من Ű§Ù„ÙƒŰȘŰ§Ù„ÙˆŰș"
+msgid "Name: %s\n"
+msgstr "Ű§Ù„Ű„ŰłÙ…: %s\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Browse to new restore repository."
-msgstr "ۧ۳ŰȘŰč۱۶ Ű§Ù„Ù‰ Ù…ŰłŰȘÙˆŰŻŰč ۧ۳ŰȘŰčۧۯ۩ ŰŹŰŻÙŠŰŻ."
+msgid "Generating preview ..."
+msgstr "ŰŹŰ§Ű±ÙŠ ŰȘÙˆÙ„ÙŠŰŻ Ű§Ù„Ù…ŰčŰ§ÙŠÙ†Ű© ..."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "CD in place - continue."
-msgstr "Ű§Ù„Ù‚Ű±Ű” في Ű§Ù„Ù…ÙƒŰ§Ù† Ű§Ù„Ű”Ű­ÙŠŰ­ - ŰȘۧۚŰč"
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
+msgstr ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Custom Restore"
-msgstr "ۧ۳ŰȘŰčۧۯ۩ Ù…ŰźŰ”Ű”Ű©"
+msgid "serial"
+msgstr "serial"
-#: ../../standalone/drakbackup:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Restore all backups"
-msgstr "ۧ۳ŰȘŰčŰŻ كل Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠŰ©"
+msgid "DVD-ROM"
+msgstr "DVD-ROM"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Failed..."
-msgstr "ÙŰŽÙ„ŰȘ Ű§Ù„Ű„ŰłŰȘŰčۧۯ۩..."
+msgid "Georgian (\"Latin\" layout)"
+msgstr "Ű§Ù„ŰŹÙˆŰ±ŰŹÙŠŰ©Ù‘ (Ű§Ù„ŰȘŰ”Ù…ÙŠÙ… Ű§Ù„Ù„Ű§ŰȘيني)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Files Restored..."
-msgstr "Ű§Ù„Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ù…ŰłŰȘŰčۧۯ۩..."
+msgid "Get the best items with Mandrake Linux Strategic partners"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Path or Module required"
-msgstr "ÙŠÙŰ­ŰȘۧۏ Ű§Ù„Ù‰ Ù…ŰłŰ§Ű± ŰŁÙˆ ÙˆŰ­ŰŻŰ©"
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
+msgstr ""
+"يمكنك Ű§Ù„ŰąÙ† ۧŰč۷ۧۥ Ű§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ Ù„Ù„ÙˆŰ­ŰŻŰ© %s.\n"
+"Ù„Ű§Ű­Űž ŰŁÙ† ŰŁÙŠ ŰčÙ†ÙˆŰ§Ù† ÙŠŰŹŰš Ű§ŰŻŰźŰ§Ù„Ù‡ Ù…ŰłŰšÙˆÙ‚Ű§Ù‹ ŰšÙ€ 0x Ù…Ű«Ù„ '0x123'"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Hostname required"
-msgstr "ÙŠÙŰ­ŰȘۧۏ Ű§Ù„Ù‰ Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Username required"
-msgstr "ÙŠÙŰ­ŰȘۧۏ Ű§Ù„Ù‰ Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…"
+msgid "Kenya"
+msgstr "ÙƒÙŠÙ†ÙŠŰ§"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Password required"
-msgstr "ÙŠÙŰ­ŰȘۧۏ Ű§Ù„Ù‰ ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ±"
+msgid "Use ``Unmount'' first"
+msgstr "ۧ۳ŰȘŰźŰŻÙ… ``ۧŰČŰ§Ù„Ű© Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„'' ŰŁÙˆÙ„Ű§"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Host Path or Module"
-msgstr "ÙˆŰ­ŰŻŰ© ŰŁÙˆ Ù…ŰłŰ§Ű± Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ"
+msgid "Installing mtools packages..."
+msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰ«ŰšÙŠŰȘ Ű­ŰČم mtools"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Host Name"
-msgstr "Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ"
+msgid "You must specify a root partition"
+msgstr "ÙŠŰŹŰš Űčليك ŰȘŰ­ŰŻÙŠŰŻ ŰȘÙ‚ŰłÙŠÙ… ۏ۰۱"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr "ۧ۳ŰȘŰčŰŻ Űčن Ű·Ű±ÙŠÙ‚ ŰšŰ±ÙˆŰȘوكول Ű§Ù„ŰŽŰšÙƒŰ©: %s"
+msgid "first step creation"
+msgstr "Ű§Ù†ŰŽŰ§ŰĄ Ű§Ù„ŰźŰ·ÙˆŰ© Ű§Ù„ŰŁÙˆÙ„Ù‰"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Via Network"
-msgstr "ۧ۳ŰȘŰčۧۯ۩ Űčن Ű·Ű±ÙŠÙ‚ Ű§Ù„ŰŽŰšÙƒŰ©"
+msgid "Both Shift keys simultaneously"
+msgstr "مفŰȘŰ§Ű­ÙŠÙ‘ Shift في Ù†ÙŰł Ű§Ù„ÙˆÙ‚ŰȘ"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr "ŰčÙ„Ű§Ù…Ű© Ű§Ù„ŰŽŰ±ÙŠŰ· Ù„ÙŠŰłŰȘ Ű§Ù„ŰčÙ„Ű§Ù…Ű© Ű§Ù„Ű”Ű­ÙŠŰ­Ű©. ŰčÙ„Ű§Ù…Ű© Ű§Ù„ŰŽŰ±ÙŠŰ· هي %s."
+msgid "Select a scanner model"
+msgstr "ۧ۟ŰȘ۱ ۷۱ۧŰČ Ű§Ù„Ù…Ű§ŰłŰ­ Ű§Ù„Ű¶ÙˆŰŠÙŠ"
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-"ŰŁŰŻŰźÙ„ Ű§Ù„ŰŽŰ±ÙŠŰ· ŰšŰ§Ù„ŰčÙ„Ű§Ù…Ű© %s\n"
-" في ŰŹÙ‡Ű§ŰČ Ű§Ù„ŰŽŰ±ÙŠŰ· %s"
+msgid "LPRng - LPR New Generation"
+msgstr "LPRng - LPR New Generation"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore From Tape"
-msgstr "ۧ۳ŰȘŰčۧۯ۩ من Ű§Ù„ŰŽŰ±ÙŠŰ·"
+msgid "Drakbackup Configuration"
+msgstr "Ű„ŰčۯۧۯۧŰȘ Drakbackup"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr "ŰčÙ„Ű§Ù…Ű© Ű§Ù„Ù‚Ű±Ű” Ù„ÙŠŰłŰȘ Ű§Ù„ŰčÙ„Ű§Ù…Ű© Ű§Ù„Ű”Ű­ÙŠŰ­Ű©. ŰčÙ„Ű§Ù…Ű© Ű§Ù„Ù‚Ű±Ű” هي %s."
+msgid "Save as.."
+msgstr "Ű­ÙŰž ŰšŰ„ŰłÙ….."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
msgstr ""
-"ŰŁŰŻŰźÙ„ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹ ŰšŰ§Ù„ŰčÙ„Ű§Ù…Ű© %s\n"
-" في ŰłÙˆŰ§Ù‚Ű© Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹ ŰȘŰ­ŰȘ Ù†Ù‚Ű·Ű© Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„ /mnt/cdrom"
+"لم يŰȘم ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ÙˆŰ§ŰŹÙ‡Ű© ŰšŰčŰŻ.\n"
+"قم ŰšŰȘŰŽŰșيل مŰčŰ§Ù„ŰŹ Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ© في Ű§Ù„Ù†Ű§ÙŰ°Ű© Ű§Ù„Ű±ŰŠÙŠŰłÙŠŰ©"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore From CD"
-msgstr "ۧ۳ŰȘŰčۧۯ۩ من Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹ"
+msgid "Korea (North)"
+msgstr "ÙƒÙˆŰ±ÙŠŰ§ Ű§Ù„ŰŽÙ…Ű§Ù„ÙŠŰ©"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup files not found at %s."
-msgstr "Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ ŰșÙŠŰ± Ù…ÙˆŰŹÙˆŰŻŰ© Űčلى %s"
+msgid "Autologin"
+msgstr "ŰŻŰźÙˆÙ„ ŰąÙ„ÙŠ"
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Change\n"
-"Restore Path"
-msgstr ""
-"ŰșÙŠÙ‘Ű±\n"
-"Ù…ŰłŰ§Ű± Ű§Ù„Ű„ŰłŰȘŰčۧۯ۩"
+msgid "System configuration"
+msgstr "ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Ù†ŰžŰ§Ù…"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
+msgid "Domain Admin Password"
+msgstr "ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ± Ù„Ù…ŰŻÙŠŰ± Ű§Ù„Ù†Ű·Ű§Ù‚"
+
+#: ../../share/advertising/05-desktop.pl:1
+#, fuzzy, c-format
msgid ""
-"Restore Selected\n"
-"Files"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
msgstr ""
-"ۧ۳ŰȘŰčŰŻ Ű§Ù„Ù…Ù„ÙŰ§ŰȘ\n"
-"Ű§Ù„Ù…ŰźŰȘۧ۱۩"
+"ÙŠÙˆÙŰ± Mandrake Linux 9.1 11 ÙˆŰ§ŰŹÙ‡Ű© ۧ۳ŰȘŰźŰŻŰ§Ù… يمكن ŰȘŰčŰŻÙŠÙ„Ù‡Ű§ ÙƒŰ§Ù…Ù„Ű©Ù‹: ÙƒÙŠŰŻÙŠ 3, ŰŹÙ†ÙˆÙ… 2, "
+"WindowsMaker, ..."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Configuring printer ..."
+msgstr "ŰŹŰ§Ű±ÙŠ Ű„Űčۯۧۯ Ű§Ù„Ű·Ű§ŰšŰčŰ© ..."
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
-"ۧ۳ŰȘŰčŰŻ Ù…ŰŻŰźÙ„\n"
-"Ű§Ù„ÙƒŰȘŰ§Ù„ÙˆŰș Ű§Ù„Ù…ŰźŰȘۧ۱"
+"للŰȘŰŁÙƒŰŻ من ۔ۭ۩ Ű§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ ŰšŰčŰŻ ۧŰčۧۯ۩ ŰȘŰ­ŰŹÙŠÙ… Ű§Ù„ŰȘŰŹŰČۊۧŰȘ, \n"
+"ŰłÙŠŰȘم Ű§Ù„ŰŻÙ‚ÙŠÙ‚ Űčلى Ù†ŰžŰ§Ù… Ű§Ù„Ù…Ù„ÙŰ§ŰȘ ŰčÙ†ŰŻ Ű§Ù„ŰȘŰŽŰșيل Ű§Ù„Ù‚Ű§ŰŻÙ… لـ Windows(TM)"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Remove user directories before restore."
-msgstr "Ű§Ű­Ű°Ù ŰŁŰŻÙ„Ű© Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…ÙŠÙ† Ù‚ŰšÙ„ Ű§Ù„Ű„ŰłŰȘŰčۧۯ۩"
+msgid "MB"
+msgstr "ميŰșŰ§ŰšŰ§ÙŠŰȘ"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "قم ŰšÙ†ŰłŰź ۭۧŰȘÙŠŰ§Ű·ÙŠ ŰŹŰŻÙŠŰŻ ÙŰšÙ„ Ű§Ù„Ű„ŰłŰȘŰčۧۯ۩ (ÙÙ‚Ű· Ù„Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠŰ© Ű§Ù„Ù…ŰȘۯ۱ۏ۩)"
+msgid "if set to yes, run some checks against the rpm database."
+msgstr "if set to yes, run some checks against the rpm database."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "select path to restore (instead of /)"
-msgstr "ۧ۟ŰȘ۱ Ù…ŰłŰ§Ű± Ű§Ù„Ű„ŰłŰȘŰčۧۯ۩ (ŰšŰŻÙ„Ű§Ù‹ من / )"
+msgid "Virgin Islands (British)"
+msgstr "Ű§Ù„ŰŹŰČ۱ Ű§Ù„Űč۰۱ۧۥ (ŰšŰ±ÙŠŰ·Ű§Ù†ÙŠŰ§)"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore Other"
-msgstr "ۧ۳ŰȘŰčŰŻ ۹۟۱"
+msgid "Bermuda"
+msgstr "ŰšŰ±Ù…ÙˆŰŻŰ§"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Restore Users"
-msgstr "ŰŁŰčŰŻ Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…ÙŠÙ† "
+msgid "click here if you are sure."
+msgstr "ۧ۶ŰșŰ· Ù‡Ù†Ű§ ۄ۰ۧ كنŰȘ مŰȘŰŁÙƒŰŻŰ§."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore system"
-msgstr "ۧ۳ŰȘŰčŰŻ Ű§Ù„Ù†Ù‘ŰžŰ§Ù…"
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
+msgstr ""
+"لم يŰȘم Ű§ÙŠŰŹŰ§ŰŻ ملف ŰȘÙ‡ÙŠŰŠŰ© \n"
+"ÙŰ¶Ù„Ű§ ۧ۶ŰșŰ· مŰčŰ§Ù„ŰŹ Ù„ŰŁÙˆ مŰȘÙ‚ŰŻÙ…."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"في Ű§Ù„ŰŁŰčلى ŰłŰȘŰŹŰŻ ŰȘÙ‚ŰłÙŠÙ…Ű§ŰȘ Ù„ÙŠÙ†ÙƒŰł Ű§Ù„Ù…ÙˆŰŹÙˆŰŻŰ© و Ű§Ù„ŰȘي ŰȘم Ű§ÙŠŰŹŰ§ŰŻÙ‡Ű§ Űčلى Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš "
+"Ű§Ù„ŰźŰ§Ű” ŰšÙƒ.\n"
+"يمكنك ŰŁÙ† ŰȘÙŰšÙ‚ÙŠ Ű„ŰźŰȘÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ, و هي ŰŹÙŠŰŻŰ© Ù„ŰŁŰșÙ„Űš ŰŁÙ†ÙˆŰ§Űč Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ.\n"
+"ۄ۰ۧ قمŰȘ ŰšŰčمل ŰŁÙŠ ŰȘŰșÙŠÙŠŰ±Ű§ŰȘ ÙÙŠŰŹŰš Űčليك ŰŁÙ† ŰȘŰčŰ±Ù Ű§Ù„ŰȘÙ‚ŰłÙŠÙ… Ű§Ù„ŰŹŰ°Ű± (\"/\"). Ù„Ű§ ŰȘŰźŰȘ۱\n"
+"ŰȘÙ‚ŰłÙŠÙ…Ű§ŰȘ ۶ŰșÙŠŰ±Ű© ۏۯۧ و Ű„Ù„Ű§ لن ŰȘŰłŰȘŰ·ÙŠŰč ŰȘŰ«ŰšÙŠŰȘ ŰšŰ±Ű§Ù…ŰŹ ÙƒŰ§ÙÙŠŰ©. ۄ۰ۧ كنŰȘ ŰȘŰ±ÙŠŰŻ ŰȘŰźŰČين "
+"Ű§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ\n"
+"Űčلى ŰȘÙ‚ŰłÙŠÙ… Ù…ŰłŰȘقل ÙŰłŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ Űčمل ŰȘÙ‚ŰłÙŠÙ… لـ\"/home\"\n"
+"(ممكن ÙÙ‚Ű· ۄ۰ۧ ÙƒŰ§Ù† Ù„ŰŻÙŠÙƒ ŰŁÙƒŰ«Ű± من ŰȘÙ‚ŰłÙŠÙ… Ù„Ù„ÙŠÙ†ÙƒŰł).\n"
+"\n"
+"كل ŰȘÙ‚ŰłÙŠÙ… مُŰčŰ·Ù‰ ŰšŰ§Ù„ŰłÙƒÙ„ Ű§Ù„ŰȘŰ§Ù„ÙŠ: \"Ű§Ù„Ű„ŰłÙ…\", \"Ű§Ù„ŰłŰčŰ©\".\n"
+"\n"
+"\"Ű§Ù„Ű„ŰłÙ…\" Ù…Ű±ÙƒŰš ŰšŰ§Ù„ŰłÙƒÙ„ Ű§Ù„ŰȘŰ§Ù„ÙŠ: \"نوŰč Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš\", \"Ű±Ù‚Ù… Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš\",\n"
+"\"Ű±Ù‚Ù… Ű§Ù„ŰȘÙ‚ŰłÙŠÙ…\" (Ù…Ű«Ù„Ű§, \"hda1\").\n"
+"\n"
+"\"Ű±Ù‚Ù… Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš\" ŰŻŰ§ŰŠÙ…Ű§ هو Ű­Ű±Ù ŰšŰčŰŻ \"hd\" ŰŁÙˆ \"sd\". ŰšŰ§Ù„Ù†ŰłŰšŰ© Ù„Ù„ŰŁÙ‚Ű±Ű§Ű” "
+"Ű§Ù„Ű”Ù„ŰšŰ©\n"
+"من نوŰč IDE ÙŰ„Ù†:\n"
+" * \"a\" ŰȘŰčني \"Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš Ű§Ù„ŰŁŰłŰ§ŰłÙŠ Űčلى مŰȘŰ­ÙƒÙ… IDE Ű§Ù„ŰŁŰłŰ§ŰłÙŠ\",\n"
+"\n"
+" * \"b\" ŰȘŰčني \"Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš Ű§Ù„Ű«Ű§Ù†ÙˆÙŠ Űčلى مŰȘŰ­ÙƒÙ… IDE Ű§Ù„ŰŁŰłŰ§ŰłÙŠ\",\n"
+"\n"
+" * \"c\" ŰȘŰčني \"Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš Ű§Ù„ŰŁŰłŰ§ŰłÙŠ Űčلى مŰȘŰ­ÙƒÙ… IDE Ű§Ù„Ű«Ű§Ù†ÙˆÙŠ\",\n"
+"\n"
+" * \"d\" ŰȘŰčني \"Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš Ű§Ù„Ű«Ű§Ù†ÙˆÙŠ Űčلى مŰȘŰ­ÙƒÙ… IDE Ű§Ù„Ű«Ű§Ù†ÙˆÙŠ\",\n"
+"\n"
+"ŰŁÙ…Ű§ ŰšŰ§Ù„Ù†ŰłŰšŰ© Ù„ŰŁÙ‚Ű±Ű§Ű” ŰłÙƒŰČي SCSI ÙŰ§Ù„Ű­Ű±Ù \"a\" يŰčني \"ŰŁÙ‚Ù„ مŰčŰ±Ù SCSI\", و Ű§Ù„Ű­Ű±Ù \"b"
+"\"\n"
+"يŰčني \"Ű«Ű§Ù†ÙŠ ŰŁÙ‚Ù„ مŰčŰ±Ù SCSI\", Ű§Ù„Űź."
+
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Other Media"
-msgstr "ÙˆŰłÙŠŰ· ۹۟۱"
+msgid "Remove"
+msgstr "Ű§Ű­Ű°Ù"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select another media to restore from"
-msgstr "ۧ۟ŰȘ۱ ÙˆŰłÙŠŰ· ۹۟۱ Ù„Ù„Ű§ŰłŰȘŰčۧۯ۩ منه"
+msgid "Lesotho"
+msgstr "Ù„ÙŠŰłÙˆŰȘو"
-#: ../../standalone/drakbackup:1
+#: ../../ugtk2.pm:1
#, c-format
-msgid "Please enter the directory where backups are stored"
-msgstr "ÙŰ¶Ù„Ű§Ù‹ ŰŁŰŻŰźÙ„ Ű§Ù„ŰŻÙ„ÙŠÙ„ Ű§Ù„Ù…ÙˆŰŹÙˆŰŻŰ© فيه Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠŰ©"
+msgid "utopia 25"
+msgstr "utopia 25"
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Restore from Hard Disk."
-msgstr "ۧ۳ŰȘŰčŰŻ من Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš"
+msgid "Pipe job into a command"
+msgstr "Ű­ÙˆÙ‘Ù„ Ű§Ù„ÙˆŰžÙŠÙŰ© Ű§Ù„Ù‰ Ű§Ù„ŰŁÙ…Ű±"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Use quota for backup files."
-msgstr "ۧ۳ŰȘŰźŰŻÙ… quota Ù„Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ."
+msgid "new dynamic device name generated by core kernel devfs"
+msgstr "ۧ۳ Ù…Ű§Ù„ŰŹÙ‡Ű§ŰČ Ű§Ù„ŰŻÙŠÙ†Ű§Ù…ÙŠÙƒÙŠ Ű§Ù„ŰŹŰŻÙŠŰŻ Ű§Ù„Ű°ÙŠ يŰȘم ŰȘÙˆÙ„ÙŠŰŻÙ‡ من devfs"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"ÙŰ¶Ù„Ű§Ù‹ ŰŁŰŻŰźÙ„ Ű§Ù„Ű­ŰŹÙ… Ű§Ù„ŰŁÙ‚Ű”Ù‰\n"
-" Ű§Ù„Ù…ŰłÙ…ÙˆŰ­ ŰšÙ‡ لـDrakbackup"
+msgid "Yes"
+msgstr "نŰčم"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the directory to save:"
-msgstr "ۧ۟ŰȘ۱ Ű§Ù„ŰŻÙ„ÙŠÙ„ Ű§Ù„Ű°ÙŠ ŰłÙŠŰȘم Ű­ÙŰžÙ‡:"
+msgid "Cote d'Ivoire"
+msgstr "كوŰȘ ŰŻÙŠÙÙˆŰ§Ű±"
-#: ../../standalone/drakbackup:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Use Hard Disk to backup"
-msgstr "ۧ۳ŰȘŰźŰŻÙ… Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš Ù„Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ"
+msgid "Which protocol do you want to use?"
+msgstr "Ù…Ű§ هو Ű§Ù„ŰšŰ±ÙˆŰȘوكول Ű§Ù„Ű°ÙŠ ŰȘŰ±ÙŠŰŻ ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡ŰŸ"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "please choose the date to restore"
-msgstr "۱ۏۧۥ ۧ۟ŰȘ۱ ŰȘŰ§Ű±ÙŠŰź Ű§Ù„Ű„ŰłŰȘŰčۧۯ۩"
+msgid "Restore Progress"
+msgstr "ŰȘÙ‚ŰŻÙ… Ű§Ù„Ű„ŰłŰȘŰčۧۯ۩"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Backup the system files before:"
-msgstr "Ű§Ù†ŰłŰź Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ù†ŰžŰ§Ù… Ù‚ŰšÙ„:"
+msgid "Estonia"
+msgstr "ۧ۳ŰȘÙˆÙ†ÙŠŰ§"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr "Ù‚Ű§ŰŠÙ…Ű© Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…ÙŠÙ† Ű§Ù„Ű°ÙŠÙ† ŰłÙŠŰȘم ۧ۳ŰȘŰčۧۯŰȘهم"
+msgid "Choose the host on which the local scanners should be made available:"
+msgstr "ۧ۟ŰȘ۱ Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ Ű§Ù„ŰȘي ÙŠŰŹŰš ŰŁÙ† ŰȘŰȘÙˆÙŰ± له Ű§Ù„Ù…Ű§ŰłŰ­Ű§ŰȘ Ű§Ù„Ű¶ÙˆŰŠÙŠŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ©:"
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "OK to restore the other files."
-msgstr "ۧ۶ŰșŰ· Ù…ÙˆŰ§ÙÙ‚ Ù„Ű§ŰłŰȘŰčۧۯ۩ Ù…Ù„ÙŰ§ŰȘ Ű§ŰźŰ±Ù‰"
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
+msgstr ""
+"ŰȘÙˆŰŹŰŻ Ù…ŰłŰ§Ű­Ű© ÙŰ§Ű±ŰșŰ© في ŰŹŰŻÙˆÙ„ Ű§Ù„ŰȘŰŹŰČۊۧŰȘ Ù„ŰŻÙŠÙƒ لكني Ù„Ű§ ŰŁŰłŰȘŰ·ÙŠŰč ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡Ű§.\n"
+"Ű§Ù„Ű­Ù„ Ű§Ù„ÙˆŰ­ÙŠŰŻ هو ŰŁÙ† ŰȘنقل Ű§Ù„ŰȘŰŹŰČۊۧŰȘ Ű§Ù„ŰŁŰłŰ§ŰłÙŠŰ© لŰȘŰ­Ű”Ù„ Űčلى Ű§Ù„Ù…ŰłŰ§Ű­Ű© ŰšÙŠÙ† Ű§Ù„ŰȘŰŹŰČۊۧŰȘ "
+"Ű§Ù„Ù…Ù…ŰȘŰŻŰ©."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " Restore Configuration "
-msgstr " ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Ű„ŰłŰȘŰčۧۯ۩ "
+msgid "Channel"
+msgstr "Ű§Ù„Ù‚Ù†Ű§Ű©"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid " Successfuly Restored on %s "
-msgstr " ŰȘمŰȘ Ű§Ù„Ű„ŰłŰȘŰčۧۯ۩ ŰšÙ†ŰŹŰ§Ű­ Űčلى %s "
+msgid "Add"
+msgstr "Ű§Ű¶Ű§ÙŰ©"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid " All of your selected data have been "
-msgstr " كل Ű§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„Ù…ŰźŰȘۧ۱۩ ŰȘم "
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "لم يŰȘم ۧŰčۯۧۯ ŰŁÙŠ Ù…ŰŽŰ§Ű±ÙƒŰ© ۧŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup files are corrupted"
-msgstr "Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ ÙŰ§ŰłŰŻŰ©"
+msgid " Error while sending mail. \n"
+msgstr " ۟۷ۣ ŰŁŰ«Ù†Ű§ŰĄ Ű§Ű±ŰłŰ§Ù„ Ű§Ù„ŰšŰ±ÙŠŰŻ. \n"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "ÙŰ¶Ù„Ű§Ù‹ قم ۚۄŰČŰ§Ù„Ű© Ű§Ù„ŰȘŰŁŰŽÙŠŰ± ŰŁÙˆ Ű§Ű­Ű°ÙÙ‡Ű§ في Ű§Ù„Ù…Ű±Ű© Ű§Ù„Ù‚Ű§ŰŻÙ…Ű©."
+msgid "Keyboard"
+msgstr "Ù„ÙˆŰ­Ű© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"List of data corrupted:\n"
-"\n"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-"Ù‚Ű§ŰŠÙ…Ű© ŰšŰ§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„ÙŰ§ŰłŰŻŰ©:\n"
-"\n"
+"ŰŁŰŻŰźÙ„ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹ ŰšŰ§Ù„ŰčÙ„Ű§Ù…Ű© %s\n"
+" في ŰłÙˆŰ§Ù‚Ű© Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹ ŰȘŰ­ŰȘ Ù†Ù‚Ű·Ű© Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„ /mnt/cdrom"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"List of data to restore:\n"
-"\n"
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
msgstr ""
-"Ù‚Ű§ŰŠÙ…Ű© Ű§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„ŰȘي ŰłÙŠŰȘم ۧ۳ŰȘ۱ۏۧŰčÙ‡Ű§:\n"
-"\n"
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Ù„Ű§ ŰȘÙ‡ÙŠŰŠŰ©, ۧ۶ŰșŰ· مŰčŰ§Ù„ŰŹ ŰŁÙˆ مŰȘÙ‚ŰŻÙ….\n"
+msgid "Choose the connection you want to configure"
+msgstr "ۧ۟ŰȘ۱ Ű§Ù„ÙˆŰ”Ù„Ű© Ű§Ù„ŰȘي ŰȘŰ±ÙŠŰŻ ŰȘÙ‡ÙŠŰŠŰȘÙ‡Ű§"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "\t-Network by webdav.\n"
-msgstr "\t-Ű§Ù„ŰŽŰšÙƒŰ© Űčن Ű·Ű±ÙŠÙ‚ webdav.\n"
+msgid "Please wait, setting security level..."
+msgstr "Ű§Ù†ŰȘ۞۱ من ÙŰ¶Ù„Ùƒ, ŰŹŰ§Ű±ÙŠ ŰȘŰčيين Ù…ŰłŰȘوى Ű§Ù„ŰŁÙ…Ù†.."
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t-Ű§Ù„ŰŽŰšÙƒŰ© Űčن Ű·Ű±ÙŠÙ‚ rsync.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
+msgstr "Mandrake Linux 9.1 هي Ű§Ù„ŰšÙŠŰŠŰ© Ű§Ù„ŰŁÙ…Ű«Ù„ لŰȘŰ·ÙˆÙŠŰ± Ű§Ù„ŰšŰ±Ű§Ù…ŰŹ"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Ű§Ù„ŰŽŰšÙƒŰ© Űčن Ű·Ű±ÙŠÙ‚ SSH.\n"
+msgid "Configuring network device %s"
+msgstr "ŰŹŰ§Ű±ÙŠ ŰȘÙ‡ÙŠŰŠŰ© ŰŹÙ‡Ű§ŰČ Ű§Ù„ŰŽŰšÙƒŰ© %s"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Ű§Ù„ŰŽŰšÙƒŰ© Űčن Ű·Ű±ÙŠÙ‚ FTP.\n"
+msgid "activated"
+msgstr "Ù…Ù†ŰŽÙ‘Ű·"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "\t-Tape \n"
-msgstr "\t-Ű§Ù„ŰŽŰ±ÙŠŰ· \n"
+msgid "Please choose which network interface will be used for the dhcp server."
+msgstr "ۧ۟ŰȘ۱ ÙˆŰ§ŰŹÙ‡Ű© Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„ŰȘي ŰłÙŠŰȘم ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡Ű§ Ù„ŰźŰ§ŰŻÙ… DHCP."
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-CDROM.\n"
-msgstr "\t-Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹ.\n"
+msgid "Finding packages to upgrade..."
+msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰšŰ­Ű« Űčن Ű§Ù„Ű­ŰČم Ű§Ù„ŰȘي ŰłŰȘŰȘم ŰȘŰ±Ù‚ÙŠŰȘÙ‡Ű§..."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t-Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš.\n"
+msgid "Mount point: "
+msgstr "Ù†Ù‚Ű·Ű© Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„: "
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
-msgstr ""
-"\n"
-"- Daemon (%s) include :\n"
+msgid "parse all fonts"
+msgstr "ŰȘŰ­Ù„ÙŠÙ„ كل Ű§Ù„ŰźŰ·ÙˆŰ·"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tŰ§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠŰ© ŰȘŰłŰȘŰźŰŻÙ… tar و gzip\n"
+msgid "With X"
+msgstr "مŰč X"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tŰ§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠŰ© ŰȘŰłŰȘŰźŰŻÙ… tar و bzip2\n"
+msgid "Multi-head configuration"
+msgstr "Ű„Űčۯۧۯ مŰȘŰčŰŻŰŻ Ű§Ù„Ű±Ű€ÙˆŰł"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "\tDo not include System Files\n"
-msgstr "\tÙ„Ű§ ŰȘÙŰ¶Ù…Ù† Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ù†ŰžŰ§Ù…\n"
+msgid "No browser available! Please install one"
+msgstr "Ù„Ű§ ÙŠÙˆŰŹŰŻ مŰȘŰ”ÙŰ­ مŰȘÙˆÙŰ±! ÙŰ¶Ù„Ű§Ù‹ قم ŰšŰȘŰ«ŰšÙŠŰȘ مŰȘŰ”ÙŰ­"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
"\n"
-"- Options:\n"
+"%s"
msgstr ""
+"هل ŰȘŰ±ÙŠŰŻ Ű­ÙŰž Ű§Ù„ŰȘŰșÙŠÙŠŰ±Ű§ŰȘ۟\n"
+"Ű§Ù„Ű„Űčۯۧۯ Ű§Ù„Ű­Ű§Ù„ÙŠ هو:\n"
"\n"
-"- ŰźÙŠŰ§Ű±Ű§ŰȘ:\n"
+"%s"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…: %s\n"
-"\t\t Űčلى Ű§Ù„Ù…ŰłŰ§Ű±: %s\n"
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "Ù„Ű§ يمكنك ۧ۳ŰȘŰźŰŻŰ§Ù… ReiserFS للŰȘŰŹŰČۊۧŰȘ ŰŁŰ”Űș۱ من 32 ميŰșŰ§ŰšŰ§ÙŠŰȘ"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"- Save via %s on host: %s\n"
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
-"\n"
-"- Ű§Ű­ÙŰž Űčۚ۱ %s Űčلى Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ: %s\n"
+"ŰšŰ±ÙˆŰȘوكول rwho ÙŠŰłÙ…Ű­ Ù„Ù„Ù…ŰłŰȘŰźŰŻÙ…ÙŠÙ† Ű§Ù„ŰšŰčÙŠŰŻÙŠÙ† ŰšŰ§Ù„Ű­Ű”ÙˆÙ„ Űčلى Ù‚Ű§ŰŠÙ…Ű© ŰšÙƒÙ„ Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…ÙŠÙ†\n"
+"Ű§Ù„Ű°ÙŠÙ† ŰłŰŹÙ„ÙˆŰ§ Ű§Ù„ŰŻŰźÙˆÙ„ Ű§Ù„Ù‰ ŰŹÙ‡Ű§ŰČ ÙŠŰŽŰșّل Ù…Ű±Ű§Ù‚Űš rwho (Ù…Ù…Ű§Ű«Ù„ لـ finger)."
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "\t\tErase=%s"
-msgstr "\t\tErase=%s"
+msgid "Domain name"
+msgstr "Ű§ŰłÙ… Ű§Ù„Ù†Ű·Ű§Ù‚"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-"\n"
-"- Ű§Ű­ÙŰž Ű§Ù„Ù‰ Ű§Ù„ŰŽŰ±ÙŠŰ· Űčلى Ű§Ù„ŰŹÙ‡Ű§ŰČ: %s"
+msgid "Sharing of local printers"
+msgstr "Ù…ŰŽŰ§Ű±ÙƒŰ© Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…Ű­Ù„ÙŠŰ©"
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
#, c-format
-msgid " (multi-session)"
-msgstr " (مŰȘŰčŰŻŰŻ Ű§Ù„ŰŹÙ„ŰłŰ§ŰȘ)"
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgstr "http://www.mandrakelinux.com/en/91errata.php3"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on device: %s"
-msgstr " Űčلى Ű§Ù„ŰŹÙ‡Ű§ŰČ: %s"
+msgid "Available printers"
+msgstr "Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű©"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "RW"
-msgstr "RW"
+msgid "Empty"
+msgstr "ÙŰ§Ű±Űș"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
-"- Burn to CD"
-msgstr ""
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
"\n"
-"- Ű§Ù†ŰłŰź Ű§Ù„Ù‰ Ù‚Ű±Ű” Ù…ŰŻÙ…ŰŹ"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
"\n"
-"- Ű§Ű­Ű°Ù كل Ù…Ù„ÙŰ§ŰȘ tar Ű§Ù„ŰźŰ§Ű”Ű© ŰšŰ§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš ŰšŰčŰŻ كل ŰčÙ…Ù„ÙŠŰ© Ù†ŰłŰź.\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
"\n"
-"- Ű§Ű­ÙŰž Űčلى Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš Űčلى Ű§Ù„Ù…ŰłŰ§Ű±:%s\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+"Monitor\n"
"\n"
-"- Other Files:\n"
-msgstr ""
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
"\n"
-"-Ű§Ù„Ù…Ù„ÙÙ‘Ű§ŰȘ Ű§Ù„ŰŁŰźŰ±Ù‰:\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- User Files:\n"
-msgstr ""
"\n"
-"-Ù…Ù„ÙÙ‘Ű§ŰȘ Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…:\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "text width"
+msgstr "Űč۱۶ Ű§Ù„Ù†Ű”"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount device %s?"
+msgstr "ŰŁÙŠÙ† ŰȘŰ±ÙŠŰŻ ŰȘŰ­Ù…ÙŠÙ„ Ű§Ù„ŰŹÙ‡Ű§ŰČ %s۟"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The default lease (in seconds)"
+msgstr "Ű§Ù„Ű„ÙŠŰŹŰ§Ű± Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠ (ŰšŰ§Ù„Ű«ÙˆŰ§Ù†ÙŠ)"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Interface \"%s\""
+msgstr "Ű§Ù„ÙˆŰ§ŰŹÙ‡Ű© \"%s\""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "With basic documentation (recommended!)"
+msgstr "مŰč ÙˆŰ«Ű§ŰŠÙ‚ Ű§Ù„Ù…ŰłŰ§ŰčŰŻŰ© Ű§Ù„ŰŁŰłŰ§ŰłÙŠŰ© (Ù…ÙŰ¶Ù‘Ù„)"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "1 button"
+msgstr "ŰČ۱ ÙˆŰ§Ű­ŰŻ"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"- System Files:\n"
+"There are %d unknown printers directly connected to your system"
msgstr ""
"\n"
-"-Ù…Ù„ÙÙ‘Ű§ŰȘ Ű§Ù„Ù†Ù‘ŰžŰ§Ù… :\n"
+"ŰȘÙˆŰŹŰŻ %d ۷ۧۚŰčۧŰȘ ŰșÙŠŰ± مŰčŰ±ÙˆÙŰ© مŰȘŰ”Ù„Ű© Ù…ŰšŰ§ŰŽŰ±Ű©Ù‹ ŰšÙ†ŰžŰ§Ù…Ùƒ"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
+#, c-format
+msgid "Test"
+msgstr "ۧ۟ŰȘۚۧ۱"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"Backup Sources: \n"
+"Allow/Forbid direct root login."
msgstr ""
+"Arguments: (arg)\n"
"\n"
-"Ù…Ű”Ű§ŰŻŰ± Ű§Ù„Ù…ŰłŰ§ŰčŰŻ :\n"
+"Allow/Forbid direct root login."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select user manually"
-msgstr "ۧ۟ŰȘŰ±Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… ÙŠŰŻÙˆÙŠÙ‘Ù‹Ű§"
+msgid "Korea"
+msgstr "ÙƒÙˆŰ±ÙŠŰ§"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Backup Users"
-msgstr "Ù…ŰłŰȘŰźŰŻÙ…Ùˆ Ű§Ù„Ù…ŰłŰ§ŰčŰŻ"
+msgid "Your choice? (default `%s'%s) "
+msgstr "Your choice? (default `%s'%s) "
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Backup system"
-msgstr "Ù†ŰžŰ§Ù… Ű§Ù„Ù…ŰłŰ§ŰčŰŻ"
+msgid "Raw printer"
+msgstr "۷ۧۚŰčŰ© ŰźŰ§Ù…"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "۱ۏۧۥ ۧ۟ŰȘ۱ Ù…Ű§ ŰȘŰ±ÙŠŰŻ Ù†ŰłŰźÙ‡ ۭۧŰȘÙŠŰ§Ű·ÙŠŰ§Ù‹"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "official vendor name of the cpu"
+msgstr "Ű§Ù„Ű„ŰłÙ… Ű§Ù„Ű±ŰłÙ…ÙŠ Ù„Ù…Ű”Ù†Ù‘Űč Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "on Tape Device"
-msgstr "Űčلى Ű§Ù„ŰŽŰ±ÙŠŰ·"
+msgid "Vendor"
+msgstr "Ű§Ù„Ù…Ű”Ù†Űč"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "on CDROM"
-msgstr "Űčلى Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹ"
+msgid "Interface %s"
+msgstr "Ű§Ù„ÙˆŰ§ŰŹÙ‡Ű© %s"
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "across Network"
-msgstr "Űčۚ۱ Ű§Ù„ŰŽÙ‘ŰšÙƒŰ©"
+msgid "Configure mouse"
+msgstr "Ű„Űčۯۧۯ Ű§Ù„ÙŰŁŰ±Ű©"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "on Hard Drive"
-msgstr "Űčلى Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù‘Ù„Űš"
+msgid "Choose the mount points"
+msgstr "ۧ۟ŰȘ۱ Ù†Ù‚Ű§Ű· Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Please choose where you want to backup"
-msgstr "۱ۏۧۥ ۧ۟ŰȘ۱ ŰŁÙŠÙ† ŰȘŰ±ÙŠŰŻ Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű§Ű­ŰȘÙŠŰ§Ű·ÙŠ."
+msgid "OK"
+msgstr "Ù…ÙˆŰ§ÙÙ‚"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "More Options"
-msgstr "ŰźÙŠŰ§Ű±Ű§ŰȘ ŰŁÙƒŰ«Ű±"
+msgid "Yugoslavian (latin)"
+msgstr "Ű§Ù„ÙŠÙˆŰșÙˆŰłÙ„Ű§ÙÙŠŰ© (Ù„Ű§ŰȘيني)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "When"
-msgstr "مŰȘى "
+msgid "Installing"
+msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Where"
-msgstr "ŰŁÙŠÙ†"
+msgid "Launch userdrake"
+msgstr "ŰŽŰșّل userdrake"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "What"
-msgstr "Ù…Ű§Ű°Ű§ "
+msgid "Is this an install or an upgrade?"
+msgstr "هل Ù‡Ű°Ű§ ŰȘŰ«ŰšÙŠŰȘ ŰŁÙ… ŰȘŰ±Ù‚ÙŠŰ©ŰŸ"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr "Ű§Ù„Űș Ù…Ù„ÙŰ§ŰȘ tar Ű§Ù„ŰźÙ„Ű”Ű© ŰšŰ§Ù„Ù‚Ű±Ű” ŰȘŰ§Ű”Ù„Űš ŰšŰčŰŻ Ű§Ù„Ù†ŰłŰź Ű§Ù„Ù‰ ÙˆŰłÙŠŰ· ۹۟۱."
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "ISDN card"
+msgstr "ŰšŰ·Ű§Ù‚Ű© ISDN ŰŻŰ§ŰźÙ„ÙŠŰ©"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Send mail report after each backup to:"
-msgstr "ŰŁŰ±ŰłÙ„ ŰȘÙ‚Ű±ÙŠŰ±Ű§Ù‹ ŰšŰ±ÙŠŰŻÙŠŰ§Ù‹ ŰšŰčŰŻ كل ŰčÙ…Ù„ÙŠŰ© Ù†ŰłŰź Ű§Ù„Ù‰:"
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
+msgstr ""
+"Ù„Ù…ŰŽŰ§Ű±ÙƒŰȘÙ†Ű§ ŰšÙ…ŰčŰ±ÙŰȘك و Ù„Ù„Ù…ŰłŰ§ŰčŰŻŰ© في ŰšÙ†Ű§ŰĄ ŰŁŰŻÙˆŰ§ŰȘ Ù„ÙŠÙ†ÙƒŰł, Ű§Ù†Ű¶Ù… Ű§Ù„Ù‰ منŰȘŰŻÙŠŰ§ŰȘ Ű§Ù„Ù†Ù‚Ű§ŰŽ "
+"Ű§Ù„ŰȘي ŰłŰȘŰŹŰŻÙ‡Ű§ في Ű”ÙŰ­Ű© \"Community\" Űčلى موقŰčÙ†Ű§"
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
"\n"
-"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-"ŰȘŰŁÙƒŰŻ من ŰŁÙ† Ù…Ű±Ű§Ù‚Űš cron Ù…ÙˆŰŹÙˆŰŻ Ű¶Ù…Ù† ŰźŰŻÙ…Ű§ŰȘ Ű§Ù„Ù†ŰžŰ§Ù…. \n"
+"ŰȘÙ‡Ű§Ù†ÙŠÙ†Ű§, Ű§Ù†ŰȘهŰȘ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰŽŰšÙƒŰ© و Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ.\n"
+"ŰłÙŠŰȘم ŰȘŰ·ŰšÙŠÙ‚ Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ© Űčلى Ù†ŰžŰ§Ù…Ùƒ Ű§Ù„ŰąÙ†.\n"
"\n"
-"Ù„Ű§Ű­Űž ŰŁÙ† كل ÙˆŰłŰ§ŰŠŰ· Ű§Ù„ŰŽŰšÙƒŰ© ŰȘŰłŰȘŰźŰŻÙ… Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš."
#: ../../standalone/drakbackup:1
#, c-format
+msgid "\t-Hard drive.\n"
+msgstr "\t-Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš.\n"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Please choose the\n"
-"media for backup."
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
+"\n"
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
-"۱ۏۧۥ ۧ۟ŰȘ۱\n"
-"ÙˆŰłÙŠŰ· Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű§Ű­ŰȘÙŠŰ§Ű·ÙŠ"
+"يŰȘم ŰȘÙ†ŰŽÙŠŰ· Ù‡Ű°Ù‡ Ű§Ù„ŰźŰ·ÙˆŰ© ÙÙ‚Ű· ۧ۰ۧ ŰȘم Ű§ÙŠŰŹŰ§ŰŻ ŰȘŰŹŰČŰŠŰ© Ù„ÙŠÙ†ÙƒŰł Ù‚ŰŻÙŠÙ…Ű©\n"
+"Űčلى ŰŹÙ‡Ű§ŰČك.\n"
+"\n"
+"ÙŠŰ­ŰȘۧۏ DrakX ۧ?ن Ű§Ù„Ù‰ ŰŁÙ† يŰčلم ۧ۰ۧ كنŰȘ ŰȘŰ±ÙŠŰŻ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ من Ű§Ù„Ű”ÙŰ± ŰŁÙˆ\n"
+"ŰȘŰ±ÙŠŰŻ ŰȘŰ±Ù‚ÙŠŰ© Ù†ŰžŰ§Ù… Mandrake Linux Ű§Ù„Ù…ÙˆŰŹÙˆŰŻ Ù„ŰŻÙŠÙƒ Ù…ŰłŰšÙ‚Ű§Ù‹:\n"
+"\n"
+" * \"ŰȘŰ«ŰšÙŠŰȘ\": في ۧ?ŰșÙ„Űš ŰȘقوم ۚۧŰČŰ§Ù„Ű© Ű§Ù„Ù†ŰžŰ§Ù… Ű§Ù„Ù‚ŰŻÙŠÙ…\n"
+"ÙƒÙ„ÙŠŰ§Ù‹. ۧ۰ۧ كنŰȘ ŰȘŰ±ÙŠŰŻ ŰȘŰșÙŠÙŠŰ± ŰȘŰŹŰČۊۧŰȘ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš, ŰŁÙˆ ŰȘŰ±ÙŠŰŻ\n"
+"ŰȘŰșÙŠÙŠŰ± Ù†ŰžŰ§Ù… Ű§Ù„Ù…Ù„ÙŰ§ŰȘ, Űčليك ۧ۟ŰȘÙŠŰ§Ű± Ù‡Ű°Ű§ Ű§Ù„ŰźÙŠŰ§Ű±. ŰčÙ…ÙˆÙ…Ű§Ù‹ ۧŰčŰȘÙ…Ű§ŰŻŰ§\n"
+"Űčلى ÙƒÙŠÙÙŠŰ© ŰȘŰŹŰČŰŠŰ© Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš Ù„ŰŻÙŠÙƒ. يمكنك منŰč ۧŰČŰ§Ù„Ű© ŰšŰč۶\n"
+"ŰšÙŠŰ§Ù†Ű§ŰȘك Ű§Ù„Ù…ÙˆŰŹÙˆŰŻŰ© Ù…ŰłŰšÙ‚Ű§Ù‹.\n"
+" * \"ŰȘŰ±Ù‚ÙŠŰ©\": ÙŰŠŰ© Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ Ù‡Ű°Ù‡ ŰȘŰłÙ…Ű­ لك ŰšŰȘŰ­ŰŻÙŠŰ« Ű§Ù„Ű­ŰČم\n"
+"Űčلى Ù†ŰžŰ§Ù… Mandrake Linux Ű§Ù„ŰźŰ§Ű” ŰšÙƒ. لن يŰȘم ŰȘŰșÙŠÙŠŰ±\n"
+"ŰšÙŠŰ§Ù†Ű§ŰȘك ŰŁÙˆ ŰȘÙ‚ŰłÙŠÙ…Ű§ŰȘ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš. ŰŁŰșÙ„Űš ŰźŰ·ÙˆŰ§ŰȘ Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ© ۧ?ŰźŰ±Ù‰\n"
+"Ù„Ű§ ŰȘŰČŰ§Ù„ Ù…ÙˆŰŹÙˆŰŻŰ©, Ù…Ű«Ù„ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ű§ŰčŰȘÙŠŰ§ŰŻÙŠ.\n"
+"\n"
+"ۧ۳ŰȘŰźŰŻŰ§Ù… ŰźÙŠŰ§Ű± ``Ű§Ù„ŰȘŰ±Ù‚ÙŠŰ©'' ÙŠŰŹŰš ŰŁÙ† يŰčمل ŰšŰŽÙƒÙ„ ŰŹÙŠŰŻ Űčلى\n"
+"ۧ۔ۯۧ۱ۧŰȘ Mandrake Linux \"8.1\" ŰŁÙˆ Ù…Ű§ فوق. ? ÙŠÙ†Ű”Ű­ ŰšŰ§Ù„ŰȘŰ±Ù‚ÙŠŰ©\n"
+"من ۧ۔ۧۯ۱ۧŰȘ Mandrake Linux Ù‚ŰšÙ„ \"8.1\"."
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
+#, c-format
+msgid "Printer on remote CUPS server"
+msgstr "۷ۧۚŰčŰ© Űčلى ŰźŰ§ŰŻÙ… CUPS ŰšŰčÙŠŰŻ"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"ÙŰ¶Ù„Ű§ ۧ۟ŰȘ۱ Ű§Ù„ÙŰȘ۱۩ \n"
-"Ù…Ű§ ŰšÙŠÙ† كل ŰčÙ…Ù„ÙŠŰ© Ù†ŰłŰź ۭۧŰȘÙŠŰ§Ű·ÙŠ"
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgstr "ŰȘŰč۰۱ Ű­Ű°Ù Ű§Ù„Ű·Ű§ŰšŰčŰ© \"%s\" من Star Office/OpenOffice.org/GIMP."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Use daemon"
-msgstr "ۧ۳ŰȘŰźŰŻÙ… Ű§Ù„Ù…Ű±Ű§Ù‚Űš"
+msgid "delete"
+msgstr "Ű­Ű°Ù"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "monthly"
-msgstr "ŰŽÙ‡Ű±ÙŠŰ§"
+msgid "here if no."
+msgstr "ۄ۶ŰșŰ· Ù‡Ù†Ű§ ۄ۰ۧ لم ŰȘكن مŰȘŰŁÙƒŰŻŰ§."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "weekly"
-msgstr "ŰŁŰłŰšÙˆŰčÙŠÙ‘Ű§"
+msgid "DHCP host name"
+msgstr "Ű§ŰłÙ… Ù…ŰłŰȘŰ¶ÙŠÙ DHCP"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "daily"
-msgstr "ÙŠÙˆÙ…ÙŠÙ‘Ű§Ù‹"
+msgid "The maximum lease (in seconds)"
+msgstr "Ű§Ù„Ű„ÙŠŰŹŰ§Ű± Ű§Ù„ŰŁÙ‚Ű”Ù‰ (ŰšŰ§Ù„Ű«ÙˆŰ§Ù†ÙŠ)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "hourly"
-msgstr "كلّ ۳ۧŰčŰ© "
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ Ű§Ù„Ù…Ù†ÙŰ° Ű§Ù„ŰȘŰłÙ„ŰłÙ„ÙŠ Ű§Ù„Ù…ÙˆŰ”Ù„Ű© ŰšÙ‡ Ű§Ù„ÙŰŁŰ±Ű©"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "HardDrive / NFS"
-msgstr "HardDrive / NFS"
+msgid "Did it work properly?"
+msgstr "هل ŰčملŰȘ ŰšŰ§Ù„ŰŽÙƒÙ„ Ű§Ù„Ű”Ű­ÙŠŰ­ŰŸ"
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
#, c-format
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
+msgid "Poor"
+msgstr "ÙÙ‚ÙŠŰ±"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please enter the directory to save to:"
-msgstr "ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ Ű§Ù„ŰŻÙ„ÙŠÙ„ Ű§Ù„Ű°ÙŠ ŰłÙŠŰȘم Ű§Ù„Ű­ÙŰž فيه:"
+msgid "The DHCP start range"
+msgstr "Ű­ŰŻÙˆŰŻ DHCP start"
-# c-format
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr "ÙŰ¶Ù„Ű§ قم ŰšŰ§Ù„ŰȘŰŁŰŽÙŠŰ± Ù‡Ù†Ű§ ۧ۰ۧ كنŰȘ ŰȘŰ±ÙŠŰŻ ۧ۟۱ۧۏ Ű§Ù„ŰŽŰ±ÙŠŰ· ŰšŰčŰŻ Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ."
+msgid "Grenada"
+msgstr "ŰčŰ±ÙŠÙ†Ű§ŰŻŰ§"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr "ÙŰ¶Ù„Ű§ قم ŰšŰ§Ù„ŰȘŰŁŰŽÙŠŰ± Ù‡Ù†Ű§ ۧ۰ۧ كنŰȘ ŰȘŰ±ÙŠŰŻ Ù…ŰłŰ­ Ű§Ù„ŰŽŰ±ÙŠŰ· Ù‚ŰšÙ„ Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ."
+msgid "Unsafe"
+msgstr "ŰșÙŠŰ± ŰąÙ…Ù†"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please check if you want to use the non-rewinding device."
+msgid ", %s sectors"
+msgstr ", %s Ù‚Ű·Ű§Űč"
+
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "No"
+msgstr "Ù„Ű§"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
msgstr ""
-"ÙŰ¶Ù„Ű§ قم ŰšŰ§Ù„ŰȘŰŁŰŽÙŠŰ± Ù‡Ù†Ű§ ۧ۰ۧ كنŰȘ ŰȘŰ±ÙŠŰŻ ۧ۳ŰȘŰźŰŻŰ§Ù… ŰŹÙ‡Ű§ŰČ ŰșÙŠŰ± Ù‚Ű§ŰšÙ„ Ù„Ù„Ű±ŰŹÙˆŰč Ű§Ù„Ù‰ Ű§Ù„ŰźÙ„Ù."
+"ۧ۰ۧ ÙƒŰ§Ù†ŰȘ ۷ۧۚŰčŰȘك ŰŹÙ‡Ű§ŰČŰ§Ù‹ مŰȘŰčŰŻŰŻ Ű§Ù„ÙˆŰžŰ§ŰŠÙ من HP ŰŁÙˆ Sony (OfficeJet, PSC, LaserJet "
+"1100/1200/1220/3200/3300 مŰč Ù…Ű§ŰłŰ­ Ű¶ÙˆŰŠÙŠ, Sony IPJ-V100) ŰŁÙˆ ŰŹÙ‡Ű§ŰČ HP PhotoSmart "
+"ŰŁÙˆ HP LaserJet 2200?"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the device name to use for backup"
-msgstr "ÙŰ¶Ù„Ű§Ù‹ ŰŁŰŻŰźÙ„ Ű§ŰłÙ… ŰŹÙ‡Ű§ŰČ Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ"
+msgid "Guadeloupe"
+msgstr "ŰșÙˆŰ§ŰŻÙŠÙ„ÙˆŰš"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Use tape to backup"
-msgstr "ۧ۳ŰȘŰźÙ… Ű§Ù„ŰŽŰ±ÙŠŰ· Ù„Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ"
+msgid "could not find any font.\n"
+msgstr "لم ŰŁŰȘمكن من Ű„ÙŠŰŹŰ§ŰŻ ŰŁÙŠ ۟۷.\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "No CD device defined!"
-msgstr "لم يŰȘم ŰȘŰčŰ±ÙŠÙ ŰŹÙ‡Ű§ŰČ Ù‚Ű±Ű” Ù…ŰŻÙ…ŰŹ!"
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "هل ŰȘŰ±ÙŠŰŻ ŰŁÙ† يقوم ŰČ۱ BackSpace ŰšŰčمل ÙˆŰžÙŠÙŰ© ŰČ۱ Delete في ۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű±ŰŸ"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"ÙŰ¶Ù„Ű§Ù‹ ŰŁŰŻŰźÙ„ Ű§ŰłÙ… ŰŹÙ‡Ű§ŰČ Ù†ŰłŰź Ű§Ù„ŰŁÙ‚Ű±Ű§Ű”\n"
-" Ù…Ű«Ű§Ù„: 0,1,0"
+msgid "Vertical refresh rate"
+msgstr "Ù†ŰłŰšŰ© Ű§Ù„Ű„Ù†Űčۧێ Ű§Ù„Ű±ŰŁŰłÙŠ"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
#, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "ÙŰ¶Ù„Ű§ قم ŰšŰ§Ù„ŰȘŰŁŰŽÙŠŰ± Ù‡Ù†Ű§ ۧ۰ۧ كنŰȘ ŰȘŰłŰȘŰźŰŻÙ… ŰŹÙ‡Ű§ŰČ DVDRAM"
+msgid "Entering step `%s'\n"
+msgstr "Entering step `%s'\n"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "ÙŰ¶Ù„Ű§ قم ŰšŰ§Ù„ŰȘŰŁŰŽÙŠŰ± Ù‡Ù†Ű§ ۧ۰ۧ كنŰȘ ŰȘŰłŰȘŰźŰŻÙ… ŰŹÙ‡Ű§ŰČ DVDR"
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " Erase Now "
-msgstr " Ű§Ù…Ű­Ù Ű§Ù„ŰąÙ† "
+msgid "Removing %s ..."
+msgstr "ŰŹŰ§Ű±ÙŠ Ű­Ű°Ù %s ..."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr ""
-"ÙŰ¶Ù„Ű§ قم ŰšŰ§Ù„ŰȘŰŁŰŽÙŠŰ± Ù‡Ù†Ű§ ۧ۰ۧ كنŰȘ ŰȘŰ±ÙŠŰŻ Ù…ŰłŰ­ Ű§Ù„ÙˆŰłÙŠŰ· Ű§Ù„Ù‚Ű§ŰšÙ„ Ù„Ű„Űčۧۯ۩ Ű§Ù„ÙƒŰȘۧۚ۩ (Ű§Ù„ŰŹÙ„ŰłŰ© "
-"Ű§Ù„ŰŁÙˆÙ„Ù‰)"
+msgid "Niger"
+msgstr "Ű§Ù„Ù†ÙŠŰŹŰ±"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "ÙŰ¶Ù„Ű§ قم ŰšŰ§Ù„ŰȘŰŁŰŽÙŠŰ± Ù‡Ù†Ű§ ۧ۰ۧ كنŰȘ ŰȘŰłŰȘŰźŰŻÙ… ÙˆŰłÙŠŰ· CDRW"
+msgid "No printer"
+msgstr "Ù„Ű§ ۷ۧۚŰčŰ©"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Please check for multisession CD"
-msgstr "ÙŰ¶Ù„Ű§ قم ŰšŰ§Ù„ŰȘŰŁŰŽÙŠŰ± Ù‡Ù†Ű§ ۧ۰ۧ كنŰȘ ŰȘŰłŰȘŰźŰŻÙ… Ù‚Ű±Ű” Ù…ŰŻÙ…ŰŹ مŰȘŰčŰŻŰŻ Ű§Ù„ŰŹÙ„ŰłŰ§ŰȘ"
+msgid "alert configuration"
+msgstr "Ű„ŰčۯۧۯۧŰȘ Ű§Ù„ŰȘÙ†ŰšÙŠÙ‡"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ Ù…ŰłŰ§Ű­Ű© ÙˆŰłÙŠŰ· CD/DVD (ŰšŰ§Ù„Ù…ÙŠŰșŰ§ŰšŰ§ÙŠŰȘ)"
+msgid "NetWare Printer Options"
+msgstr "ŰźÙŠŰ§Ű±Ű§ŰȘ ۷ۧۚŰčŰ© NetWare"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
-msgstr ""
-"ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ ŰŹÙ‡Ű§ŰČ CD/DVD Ű§Ù„ŰźŰ§Ű” ŰšÙƒ\n"
-"(ۧ۶ŰșŰ· Ű§ŰŻŰźŰ§Ù„ Ù„Ù†ŰŽŰ± Ű§Ù„Ű„ŰčۯۧۯۧŰȘ Ù„Ű­Ù‚ÙˆÙ„ ŰŁŰźŰ±Ù‰.\n"
-"Ù‡Ű°Ű§ Ű§Ù„Ű­Ù‚Ù„ Ù„ÙŠŰł Ű¶Ű±ÙˆŰ±ÙŠŰ§Ù‹, Ű§Ù†Ù‡ Ù…ŰŹŰ±ŰŻ ۣۯۧ۩ Ù„Ù…Ù„ŰĄ Ű§Ù„Ű„ŰłŰȘÙ…Ű§Ű±Ű©.)"
+msgid "%s BootSplash (%s) preview"
+msgstr "%s BootSplash (%s) مŰčŰ§ÙŠÙ†Ű©"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Use CD/DVDROM to backup"
-msgstr "ۧ۳ŰȘŰźŰŻÙ… CD/DVDROM Ù„Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ"
+msgid "General"
+msgstr "ŰčŰ§Ù…"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Need hostname, username and password!"
-msgstr "ÙŠÙŰ­ŰȘۧۏ Ű§Ù„Ù‰ Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ و Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… و ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ±!"
+msgid "Printing system: "
+msgstr "Ù†ŰžŰ§Ù… Ű§Ù„Ű·ŰšŰ§ŰčŰ©: "
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Remember this password"
-msgstr "ŰȘŰ°ÙƒÙ‘Ű± ÙƒÙ„Ù…Ű© Ű§Ù„ŰłŰ± Ù‡Ű°Ù‡"
+msgid "Add a user"
+msgstr "ŰŁŰ¶Ù Ù…ŰłŰȘŰźŰŻÙ…"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please enter your password"
-msgstr "۱ۏۧۥ ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ±"
+msgid "Network configuration (%d adapters)"
+msgstr "ۧŰčۯۧۯۧŰȘ Ű§Ù„ŰŽŰšÙƒŰ© (%d Ù…ÙˆŰ§ŰŠÙ…Ű§ŰȘ)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "Please enter your login"
-msgstr "۱ۏۧۥ ŰŁŰŻŰźÙ„ Ű§ŰłÙ… Ű§Ù„ŰŻŰźÙˆÙ„"
+msgid "Mandatory package %s is missing"
+msgstr "Ű§Ù„Ű­ŰČÙ…Ű© Ű§Ù„Ű¶Ű±ÙˆŰ±ÙŠŰ© %s Ù…ÙÙ‚ÙˆŰŻŰ©"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
-msgstr ""
-"ÙŰ¶Ù„Ű§Ù‹ ŰŁŰŻŰźÙ„ Ű§Ù„ŰŻÙ„ÙŠÙ„ (ŰŁÙˆ Ű§Ù„ÙˆŰ­ŰŻŰ©) Ű§Ù„ŰȘي ŰłÙŠŰȘم ÙÙŠÙ‡Ű§ ÙˆŰ¶Űč\n"
-" Ű§Ù„Ù†ŰłŰźŰ© Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠŰ© Űčلى Ù‡Ű°Ű§ Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ."
+msgid "Philippines"
+msgstr "Ű§Ù„ÙÙŠÙ„ÙŠŰšÙŠÙ†"
-#: ../../standalone/drakbackup:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
#, c-format
-msgid "Please enter the host name or IP."
-msgstr "ÙŰ¶Ù„Ű§ ŰŁŰŻŰźÙ„ Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ ŰŁÙˆ ŰčÙ†ÙˆŰ§Ù† IP."
+msgid "Ok"
+msgstr "Ù…ÙˆŰ§ÙÙ‚"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
-msgstr ""
-"Ù…ÙŰ§ŰȘÙŠŰ­ ŰŁŰźŰ±Ù‰\n"
-"(ŰșÙŠŰ± drakbackup) Ù…ÙˆŰŹÙˆŰŻŰ© Ù…ŰłŰšÙ‚Ű§Ù‹"
+msgid "Print Queue Name"
+msgstr "Ű§ŰłÙ… Ű”Ù Ű§Ù„Ű·Ű§ŰšŰčŰ©"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "هل ŰȘŰ±ÙŠŰŻ ۧ۳ŰȘŰźŰŻŰ§Ù… aboot۟"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "Ű§Ù„ŰšÙŠÙ„Ű§Ű±ÙˆŰłÙŠŰ©"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-" Transfer \n"
-"Now"
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
msgstr ""
-" Ű§Ù†Ù‚Ù„ \n"
-"Ű§Ù„ŰąÙ†"
+"PDQ ÙŠŰŻŰčم ÙÙ‚Ű· Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…Ű­Ù„ÙŠŰ© و ۷ۧۚŰčۧŰȘ LPD Ű§Ù„ŰšŰčÙŠŰŻŰ© و ۷ۧۚŰčۧŰȘ Socket/TCP.\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Move files to the new partition"
+msgstr "Ű§Ù†Ù‚Ù„ Ű§Ù„Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ù‰ ŰȘŰŹŰČŰŠŰ© ŰŹŰŻÙŠŰŻŰ©"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
msgstr ""
-"Ű§Ù†ŰŽŰŠ/لنقل\n"
-"Ù…ÙŰ§ŰȘÙŠŰ­ Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ لـSSH"
+"ŰŁŰŻŰźÙ„ Ù‡Ù†Ű§ ŰźŰ§ŰŻÙ…Ű§ŰȘ CUPS Ű§Ù„ŰȘي ŰȘŰ±ÙŠŰŻ ۧ۳ŰȘŰźŰŻŰ§Ù… ۷ۧۚŰčۧŰȘÙ‡Ű§. ŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ Űčمل Ű°Ù„Ùƒ ÙÙ‚Ű· Ű§Ù† لم "
+"ŰȘقم Ű§Ù„ŰźŰ§ŰŻÙ…Ű§ŰȘ ŰšÙ†ŰŽŰ± مŰčÙ„ÙˆÙ…Ű§ŰȘ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Űčلى Ű§Ù„ŰŽŰšÙƒ Ű§Ù„Ù…Ű­Ù„ÙŠŰ©."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use Expect for SSH"
-msgstr "ۧ۳ŰȘŰźŰŻÙ… Expect لـSSH"
+msgid "Restore From Catalog"
+msgstr "ۧ۳ŰȘŰčۧۯ۩ من Ű§Ù„ÙƒŰȘŰ§Ù„ÙˆŰș"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Net Method:"
-msgstr "Net Method:"
+msgid "Pitcairn"
+msgstr "ŰšÙŠŰȘÙƒŰ§ÙŠŰ±Ù†"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use network connection to backup"
-msgstr "ۧ۳ŰȘŰźŰŻÙ… Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„ŰŽŰšÙƒŰ© Ù„Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ"
+msgid "IDE"
+msgstr "IDE"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Users"
-msgstr "Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…ÙˆÙ†"
+msgid "group :"
+msgstr "Ù…ŰŹÙ…ÙˆŰčŰ© :"
-#: ../../standalone/drakbackup:1
+#: ../../fs.pm:1
#, c-format
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
+msgid "mounting partition %s in directory %s failed"
+msgstr "ÙŰŽÙ„ ŰȘŰ­Ù…ÙŠÙ„ Ű§Ù„ŰȘŰŹŰČŰŠŰ© %s في Ű§Ù„ŰŻÙ„ÙŠÙ„ %s"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr "ۧ۳ŰȘŰźŰŻÙ… Ű§Ù„Ù†ŰłŰź Ű§Ù„ŰȘŰ±Ű§ÙƒÙ…ÙŠ (Ù„Ű§ ŰȘŰłŰȘŰšŰŻÙ„ Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠŰ© Ű§Ù„Ù‚ŰŻÙŠÙ…Ű©)"
+msgid "Lilo screen"
+msgstr "ێۧێ۩ Lilo"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid "Remove Selected"
-msgstr "Ű§Ű­Ű°Ù Ű§Ù„Ù…Ű§ŰŻŰ© Ű§Ù„Ù…ŰźŰȘۧ۱۩"
+msgid "LILO with graphical menu"
+msgstr "LILO مŰč Ù‚Ű§ŰŠÙ…Ű© Ű±ŰłÙˆÙ…ÙŠŰ©"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Do not include the browser cache"
-msgstr "Ù„Ű§ ŰȘŰłŰȘŰźŰŻÙ… Ű°Ű§ÙƒŰ±Ű© Ű§Ù„Ù…ŰȘŰ”ÙŰ­ Ű§Ù„Ù…ŰźŰšŰŠÙŠŰ©"
+msgid "Estimating"
+msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„Ű­ŰłŰ§Űš Ű§Ù„ŰȘÙ‚Ű±ÙŠŰšÙŠ"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "۱ۏۧۥ ۧ۟ŰȘ۱ كل Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…ÙŠÙ† Ű§Ù„Ű°ÙŠÙ† ŰȘŰ±ÙŠŰŻ ŰȘŰ¶Ù…ÙŠÙ†Ù‡Ù… في Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ."
+msgid "You can't unselect this package. It is already installed"
+msgstr "Ù„Ű§ يمكن ۧŰČŰ§Ù„Ű© ۧ۟ŰȘÙŠŰ§Ű± Ù‡Ű°Ù‡ Ű§Ù„Ű­ŰČم. Ű§Ù†Ù‡Ű§ Ù…Ű«ŰšŰȘŰ© Ù…ŰłŰšÙ‚Ű§Ù‹"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"ŰšÙ‡Ű°Ű§ Ű§Ù„ŰźÙŠŰ§Ű± يمكنك ۧ۳ŰȘ۱ۏۧŰč ŰŁÙŠ Ù†ŰłŰźŰ© من\n"
-" ŰŻÙ„ÙŠÙ„ /etc Ű§Ù„ŰźŰ§Ű” ŰšÙƒ."
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr ", Ű§Ù„Ű·Ű§ŰšŰčŰ© \"%s\" Űčلى ŰźŰ§ŰŻÙ… SMB/Windows \"%s\""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Ù„Ű§ ŰȘÙŰ¶Ù…Ù‘Ù† Ű§Ù„Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ù…Ù‡Ù…Ű© (passws, group,fstab)"
+msgid "Go on anyway?"
+msgstr "هل ŰȘŰ±ÙŠŰŻ Ű§Ù„Ù…ŰȘۧۚŰčŰ© Űčلى ŰŁÙŠ Ű­Ű§Ù„ŰŸ"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use incremental backup (do not replace old backups)"
-msgstr "ۧ۳ŰȘŰźŰŻÙ… Ű§Ù„Ù†ŰłŰź Ű§Ù„ŰȘŰ±Ű§ÙƒÙ…ÙŠ (Ù„Ű§ ŰȘŰłŰȘŰšŰŻÙ„ Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠŰ© Ű§Ù„Ù‚ŰŻÙŠÙ…Ű©)"
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰšŰ­Ű« Űčن Ű§Ù„Ű­ŰČم Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű© و ۧŰčۯۧ۩ ŰšÙ†Ű§ŰĄ Ù‚Ű§ŰčŰŻŰ© ŰšÙŠŰ§Ù†Ű§ŰȘ rpm..."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Ű§Ù†ŰłŰź Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ù†ŰžŰ§Ù…: (ŰŻÙ„ÙŠÙ„ /etc)"
+msgid "Does not appear to be recordable media!"
+msgstr "Ù„Ű§ ÙŠŰšŰŻÙˆ ÙˆŰłÙŠŰ· Ù‚Ű§ŰšÙ„ للكŰȘۧۚ۩!"
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr "Ù‡Ű°Ù‡ Ű§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ ÙŠÙ…ÙƒÙ†Ù‡Ű§ Ù†ŰłŰź و ۧ۳ŰȘ۱ۏۧŰč كل Ű§Ù„Ù…Ù„ÙŰ§ŰȘ في ŰŻÙ„ÙŠÙ„ /etc.\n"
+msgid "Specify options"
+msgstr "Ű­ŰŻŰŻ Ű§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Vanuatu"
+msgstr "ÙŰ§Ù†Ű§ŰȘو"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Either the server name or the server's IP must be given!"
+msgstr "ÙŠŰŹŰš ۧŰč۷ۧۥ Ű§ŰłÙ… Ű§Ù„ŰźŰ§ŰŻÙ… ŰŁÙˆ Ű±Ù‚Ù… IP Ű§Ù„ŰźŰ§Ű” ŰšŰ§Ù„ŰźŰ§ŰŻÙ…!"
+
+#: ../../any.pm:1
#, c-format
msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
"\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
msgstr ""
-"\n"
-"ÙŰ¶Ù„Ű§Ù‹ قم ŰšŰ§Ù„ŰȘŰŁŰŽÙŠŰ± Űčلى Ű§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„ŰȘي ŰȘŰ­ŰȘŰ§ŰŹÙ‡Ű§.\n"
+"Ù‚Ű±Ű” Ű§Ù‚Ù„Ű§Űč Ù…ŰźŰ”Ű” ÙŠÙˆÙŰ± Ű·Ű±ÙŠÙ‚Ű© Ù„Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ Ù†ŰžŰ§Ù… Ù„ÙŠÙ†ÙƒŰł Ű§Ù„ŰźŰ§Ű” ŰšÙƒ ŰŻÙˆÙ†\n"
+"Ű§Ù„Ű„ŰčŰȘÙ…Ű§ŰŻ Űčلى Ù…Ű­Ù…Ù‘Ù„ Ű§Ù„Ű„Ù‚Ù„Ű§Űč Ű§Ù„Ű„ŰčŰȘÙŠŰ§ŰŻÙŠ. Ù‡Ű°Ű§ Ù…ÙÙŠŰŻ ۧ۰ۧ لم ŰȘكن ŰȘŰ±ÙŠŰŻ ŰȘŰ«ŰšÙŠŰȘ\n"
+"SILO Űčلى Ù†ŰžŰ§Ù…Ùƒ, ŰŁÙˆ ۧ۰ۧ ŰŁŰČŰ§Ù„ Ù†ŰžŰ§Ù… ŰȘŰŽŰșيل ۹۟۱ LILO, ŰŁÙˆ ۧ۰ۧ لم يŰȘÙˆŰ§ÙÙ‚ SILO\n"
+"مŰč ŰȘÙ‡ÙŠŰŠŰ© Ù†ŰžŰ§Ù…Ùƒ. يمكن ÙƒŰ°Ù„Ùƒ ۧ۳ŰȘŰźŰŻŰ§Ù… Ù‚Ű±Ű” Ű§Ù‚Ù„Ű§Űč Ù…ŰźŰ”Ű” مŰč\n"
+"Mandrake rescue image, Ù…Ù…Ű§ ÙŠŰŹŰčل Ű§Ù„Ù…ŰčŰ§Ù„ŰŹŰ© من Ű§Ù†Ù‡ÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„Ù†ŰžŰ§Ù… Ű§Ù„ŰźŰ·ÙŠŰ±Ű© ŰŁÙƒŰ«Ű± "
+"ŰłÙ‡ÙˆÙ„Ű©.\n"
+"ۧ۰ۧ كنŰȘ ŰȘŰ±ÙŠŰŻ Ű§Ù†ŰŽŰ§ŰĄ Ù‚Ű±Ű” Ű§Ù‚Ù„Ű§Űč Ù„Ù†ŰžŰ§Ù…Ùƒ, ŰŁŰŻŰźÙ„ Ù‚Ű±Ű” Ù…Ű±Ù† في Ű§Ù„ŰłÙˆŰ§Ù‚Ű©\n"
+"Ű§Ù„ŰŁÙˆÙ„Ù‰ و ۧ۶ŰșŰ· \"Ù…ÙˆŰ§ÙÙ‚\"."
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Select the files or directories and click on 'Add'"
-msgstr "ۧ۟ŰȘ۱ Ű§Ù„Ù…Ù„ÙŰ§ŰȘ ŰŁÙˆ Ű§Ù„ŰŁŰŻÙ„Ű© Ű«Ù… Ű§Ù†Ù‚Ű± 'ŰŁŰ¶Ù'"
+msgid "You can't use an encrypted file system for mount point %s"
+msgstr "Ù„Ű§ يمكنك ۧ۳ŰȘŰźŰŻŰ§Ù… Ù†ŰžŰ§Ù… Ù…Ù„ÙŰ§ŰȘ Ù…Ű±Ù…Ù‘ŰČ Ù„Ù†Ù‚Ű·Ű© Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„ %s"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "File Selection"
-msgstr "ۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„Ù…Ù„ÙŰ§ŰȘ"
+msgid "Norfolk Island"
+msgstr "ŰŹŰČÙŠŰ±Ű© Ù†ÙˆŰ±ÙÙˆÙ„Ùƒ"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Can't create catalog!"
-msgstr "ŰȘŰč۰۱ Ű§Ù†ŰŽŰ§ŰĄ Ű§Ù„ÙƒŰȘŰ§Ù„ÙˆŰș!"
+msgid "Theme installation failed!"
+msgstr "ÙŰŽÙ„ ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„ŰłÙ…Ű§ŰȘ"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid " Error while sending mail. \n"
-msgstr " ۟۷ۣ ŰŁŰ«Ù†Ű§ŰĄ Ű§Ű±ŰłŰ§Ù„ Ű§Ù„ŰšŰ±ÙŠŰŻ. \n"
+msgid "Nothing to do"
+msgstr "Ù„Ű§ ŰŽÙŠŰŠ للŰčمل"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
-"\n"
-"Ù†ŰŽŰ§Ű·Ű§ŰȘ Drakbackup Űčن Ű·Ű±ÙŠÙ‚ ŰŽŰ±ÙŠŰ· Ű§Ù„ŰȘŰźŰČين:\n"
-"\n"
+msgid "Use for loopback"
+msgstr "ۧ۳ŰȘŰźŰŻÙ… لـloopback"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
-"\n"
-"Ù†ŰŽŰ§Ű·Ű§ŰȘ Drakbackup Űčن Ű·Ű±ÙŠÙ‚ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹ:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
+msgstr "ۣۯۧ۩ ŰȘÙ‚Ű±ÙŠŰ± Ű§Ù„ŰčÙŠÙˆŰš في Mandrake"
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
-"\n"
-"Ù†ŰŽŰ§Ű·Ű§ŰȘ Drakbackup Űčن Ű·Ű±ÙŠÙ‚ %s:\n"
-"\n"
+msgid "use pppoe"
+msgstr "ۧ۳ŰȘŰźŰŻÙ… pppoe"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving files to the new partition"
+msgstr "ŰŹŰ§Ű±ÙŠ نقل Ű§Ù„Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ù‰ Ű§Ù„ŰȘŰŹŰČŰŠŰ© Ű§Ù„ŰŹŰŻÙŠŰŻŰ©"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s مŰč ŰŻŰčم ŰȘŰŹŰ±ÙŠŰšÙŠ Ù„Ù„Ű±ŰłÙˆÙ… Ű«Ù„Ű§Ű«ÙŠŰ© Ű§Ù„ŰŁŰšŰčۧۯ"
+
+#: ../../help.pm:1 ../../interactive.pm:1
+#, c-format
+msgid "Advanced"
+msgstr "مŰȘÙ‚ŰŻÙ…"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transfer"
+msgstr "Ű§Ù†Ù‚Ù„"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak (ŰłÙˆÙŠŰŻÙŠŰ©)"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-" Ù…ŰŽÙƒÙ„Ű© في ÙˆŰ”Ù„Ű© FTP: لم يكن ŰšŰ§Ù„Ű„Ù…ÙƒŰ§Ù† Ű§Ű±ŰłŰ§Ù„ Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙƒ "
-"ۚۧ۳ŰȘŰźŰŻŰ§Ù… FTP.\n"
+msgid "More Options"
+msgstr "ŰźÙŠŰ§Ű±Ű§ŰȘ ŰŁÙƒŰ«Ű±"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Afghanistan"
+msgstr "ŰŁÙŰșŰ§Ù†ŰłŰȘŰ§Ù†"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Delete Hard Drive tar files after backup to other media."
+msgstr "Ű§Ù„Űș Ù…Ù„ÙŰ§ŰȘ tar Ű§Ù„ŰźÙ„Ű”Ű© ŰšŰ§Ù„Ù‚Ű±Ű” ŰȘŰ§Ű”Ù„Űš ŰšŰčŰŻ Ű§Ù„Ù†ŰłŰź Ű§Ù„Ù‰ ÙˆŰłÙŠŰ· ۹۟۱."
+
+#: ../../services.pm:1
+#, c-format
msgid ""
-"file list sent by FTP: %s\n"
-" "
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
msgstr ""
-"Ù‚Ű§ŰŠÙ…Ű© Ű§Ù„Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ù…Ű±ŰłÙ„Ű© من FTP: %s\n"
-" "
+"cron هو ŰšŰ±Ù†Ű§Ù…ŰŹ UNIX Ű§Ù„Ù‚ÙŠŰ§ŰłÙŠ لŰȘŰŽŰșيل Ű§Ù„ŰšŰ±Ű§Ù…ŰŹ Ű§Ù„Ù…Ű­ŰŻŰŻŰ© من Ù‚ŰšÙ„ Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…\n"
+"ŰčÙ†ŰŻ ŰŁŰŻÙˆÙ‚Ű§ŰȘ Ù…Ű­ŰŻŰŻŰ© ŰŻÙˆŰ±ÙŠŰ§Ù‹. vixie cron ÙŠŰ¶ÙŠÙ ŰčŰŻŰŻŰ§Ù‹ من Ű§Ù„Ù…ŰČŰ§ÙŠŰ§ Ű§Ù„Ù‰ UNIX\n"
+"cron Ű§Ù„ŰŁŰłŰ§ŰłÙŠ, ŰšÙ…Ű§ ÙÙŠÙ‡Ű§ Ű­Ù…Ű§ÙŠŰ© ŰŁÙ…Ù†ÙŠŰ© ŰŁÙŰ¶Ù„, و ŰźÙŠŰ§Ű±Ű§ŰȘ ŰȘÙ‡ÙŠŰŠŰ© ŰŁÙ‚ÙˆÙ‰."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "No changes to backup!"
-msgstr "Ù„Ű§ ŰȘŰșÙŠÙŠŰ±Ű§Ù† Ù„Ù„Ù†ŰłŰźŰ© Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠŰ©!"
+msgid "Burundi"
+msgstr "ŰšÙˆŰ±ÙˆÙ†ŰŻÙŠ"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ Ù„Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš..."
+msgid "Add Client -->"
+msgstr "Ű§Ű¶Ű§ÙŰ© Űčميل -->"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Backup Other files..."
-msgstr "Ű§Ù†ŰłŰź Ù…Ù„ÙŰ§ŰȘ ŰŁŰźŰ±Ù‰..."
+msgid "Read carefully!"
+msgstr "Ű§Ù‚Ű±ŰŁ ŰŹÙŠŰŻŰ§!"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "Ű§Ù„ŰȘÙ‚ŰŻÙ… في Ù†ŰłŰź Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš..."
+msgid "RW"
+msgstr "RW"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Backup User files..."
-msgstr "Ű§Ù†ŰłŰź Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…ÙŠÙ†..."
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
+msgstr ""
+"ÙŰ¶Ù„Ű§Ù‹,\n"
+"ۧ۷ۚŰč tv norm Ű§Ù„ŰźŰ§Ű” ŰšÙƒ و ŰšÙ„ŰŻÙƒ"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Backup system files..."
-msgstr "Ű§Ù†ŰłŰź Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ù†ŰžŰ§Ù…..."
+msgid "Port"
+msgstr "Ű§Ù„ŰšÙˆŰ§ŰšŰ©"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "No tape in %s!"
-msgstr "Ù„Ű§ ÙŠÙˆŰŹŰŻ ŰŽŰ±ÙŠŰ· في %s!"
+msgid "No (experts only)"
+msgstr "Ù„Ű§ (Ù„Ù„ŰźŰšŰ±Ű§ŰĄ ÙÙ‚Ű·)"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Permission problem accessing CD."
-msgstr "ŰȘÙˆŰŹŰŻ Ù…ŰŽÙƒÙ„Ű© في Ű§Ù„ŰȘŰ”Ű±ÙŠŰ­ Ù„Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹ."
+msgid "No kernel selected!"
+msgstr "لم يŰȘم Ű§ÙŠŰŹŰ§ŰŻ Ù†ÙˆŰ§Ű©!"
-#: ../../standalone/drakbackup:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "This may take a moment to erase the media."
-msgstr "Ù‚ŰŻ ÙŠŰłŰȘŰșŰ±Ù‚ Ù…ŰłŰ­ Ű§Ù„ÙˆŰłÙŠŰ· ŰšŰč۶ Ű§Ù„ÙˆÙ‚ŰȘ."
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Press enter to boot the selected OS, 'e' to edit the"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Not erasable media!"
-msgstr "ÙˆŰłÙŠŰ· ŰșÙŠŰ± Ù‚Ű§ŰšÙ„ Ù„Ù„Ù…ŰłŰ­!"
+msgid "Set-GID"
+msgstr "Set-GID"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr "Ù„Ű§ ÙŠŰšŰŻÙˆ ÙˆŰłÙŠŰ· Ù‚Ű§ŰšÙ„ للكŰȘۧۚ۩!"
+msgid "The encryption keys do not match"
+msgstr "Ù…ÙŰ§ŰȘÙŠŰ­ Ű§Ù„ŰȘŰŽÙÙŠŰ± ŰșÙŠŰ± مŰȘŰ·Ű§ŰšÙ‚Ű©"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No CDR/DVDR in drive!"
-msgstr "Ù„Ű§ ÙŠÙˆŰŹŰŻ Ù‚Ű±Ű” CD-R/DVD-R في Ű§Ù„ŰłÙˆŰ§Ù‚Ű©"
+msgid "Right \"Windows\" key"
+msgstr "مفŰȘۭۧ \"Windows\" Ű§Ù„ŰŁÙŠÙ…Ù†"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "WebDAV transfer failed!"
-msgstr "ÙŰŽÙ„ŰȘ ŰčÙ…Ù„ÙŠŰ© نقل WebDAV!"
+msgid "CDROM / DVDROM"
+msgstr "CDROM / DVDROM"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "WebDAV remote site already in sync!"
-msgstr "موقŰč WebDAV Ű§Ù„ŰšŰčÙŠŰŻ مŰȘŰČŰ§Ù…Ù† Ù…ŰłŰšÙ‚Ű§Ù‹!"
+msgid "if set to yes, check empty password in /etc/shadow."
+msgstr "if set to yes, check empty password in /etc/shadow."
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Total progess"
-msgstr "Ű§ŰŹÙ…Ű§Ù„ÙŠ Ű§Ù„ŰȘÙ‚ŰŻÙ…"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
+msgstr ""
+"Ù‚ŰšÙ„ Ű§Ù„Ù…ŰȘۧۚŰčŰ©, Űčليك Ù‚Ű±Ű§ŰĄŰ© ŰšÙ†ÙˆŰŻ Ű§Ù„ŰȘŰ±ŰźÙŠŰ” ŰŹÙŠŰŻŰ§Ù‹. Ű§Ù†Ù‡Ű§\n"
+"ŰȘŰșŰ·ÙŠ كل ŰȘوŰČيŰčŰ© Mandrake Linux. ۧ۰ۧ كنŰȘ ŰȘÙˆŰ§ÙÙ‚ Űčلى كل Ű§Ù„ŰšÙ†ÙˆŰŻ\n"
+"Ű§Ù„Ù…ÙˆŰŹÙˆŰŻŰ© ÙÙŠÙ‡Ű§, قم ŰšŰ§Ù„ŰȘۣێۚ۱ Űčلى Ű”Ù†ŰŻÙˆÙ‚ \"Ű§Ù‚ŰšÙ„\". Ű§Ù† لم ŰȘÙ‚ŰšÙ„, قم ۚۄŰșÙ„Ű§Ù‚\n"
+"Ű§Ù„ÙƒÙ…ŰšÙŠÙˆŰȘ۱."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
+"Here is a list of the available printing options for the current printer:\n"
"\n"
-"without being prompted for a password."
msgstr ""
-"ŰȘم Ű§Ù„Ù†Ù‚Ù„ ŰšÙ†ŰŹŰ§Ű­\n"
-"Ű±ŰšÙ…Ű§ ŰȘŰ±ÙŠŰŻ Ű§Ù„ŰȘŰ­Ù‚Ù‚ ۧ۰ۧ ÙƒŰ§Ù† يمكنك Ű§Ù„ŰŻŰźÙˆÙ„ Ű§Ù„Ù‰ ŰźŰ§ŰŻÙ… ŰšŰ§Ù„ŰŁÙ…Ű±:\n"
+"Ù‡Ű°Ù‡ Ù‚Ű§ŰŠÙ…Ű© ŰšŰ§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű© Ù„Ù„Ű·ŰšŰ§ŰčŰ© Űčلى Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„Ű­Ű§Ù„ÙŠŰ©:\n"
"\n"
-"ssh -i %s %s\\@%s\n"
+
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolutions"
+msgstr "ŰŻÙ‚Ű© Ű§Ù„Űč۱۶"
+
+#: ../../network/drakfirewall.pm:1
+#, c-format
+msgid ""
+"drakfirewall configurator\n"
"\n"
-"ŰŻÙˆÙ† ŰȘÙ†ŰšÙŠÙ‡Ùƒ Ű§Ù„Ù‰ Ű§ŰŻŰźŰ§Ù„ ÙƒÙ„Ù…Ű© Ù…Ű±ÙˆŰ±."
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
+msgstr ""
+"ۣۯۧ۩ ŰȘÙ‡ÙŠŰŠŰ© drakfirewall\n"
+"\n"
+"Ù‡Ű°Ù‡ Ű§Ù„ŰŁŰŻŰ§Ű© ŰȘŰłÙ…Ű­ لك ŰšŰȘÙ‡ÙŠŰŠŰ© ۏۯۧ۱ Ù†Ű§Ű±ÙŠ ŰŽŰźŰ”ÙŠ Ù„Ù†ŰžŰ§Ù… Mandrake Linux Ù‡Ű°Ű§.\n"
+"ۄ۰ۧ كنŰȘ ŰȘŰ±ÙŠŰŻ ۏۯۧ۱ۧ Ù†Ű§Ű±ÙŠŰ§ مŰȘ۟۔۔ۧ, Ű§Ù„Ù‚ Ù†ŰžŰ±Ű© Űčلى\n"
+"ŰȘوŰČيŰčŰ© MandrakeSecurity Firewall."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "%s not responding"
-msgstr "%s Ù„Ű§ ÙŠŰłŰȘŰŹÙŠŰš"
+msgid ""
+"Please enter your username, password and domain name to access this host."
+msgstr ""
+"ÙŰ¶Ù„Ű§Ù‹ ŰŁŰŻŰźÙ„ Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…, ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ± و Ű§Ù„Ù†Ű·Ű§Ù‚ Ű§Ù„ŰźŰ§Ű” ŰšÙƒ Ù„Ù„ŰŻŰźÙˆÙ„ Ű§Ù„Ù‰ Ù‡Ű°Ű§ "
+"Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Can't find %s on %s"
-msgstr "ŰȘŰč۰۱ Ű§ÙŠŰŹŰ§ŰŻ %s Űčلى %s"
+msgid "Remove selected host"
+msgstr "Ű§Ű­Ű°Ù Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ Ű§Ù„Ù…ŰźŰȘۧ۱"
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr "ŰȘم Ű±ÙŰ¶ Ù„Ű§ŰȘŰ”Ű±ÙŠŰ­ ŰšÙ†Ù‚Ù„ %s Ű§Ù„Ù‰ %s"
+msgid "Network configuration"
+msgstr "ۧŰčۯۧۯۧŰȘ Ű§Ù„ŰŽŰšÙƒŰ©"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Bad password on %s"
-msgstr "ÙƒÙ„Ù…Ű© Ù…Ű±ÙˆŰ± ŰłÙŠŰŠŰ© Űčلى %s"
+msgid "No sharing"
+msgstr "Ù„Ű§ Ù…ŰŽŰ§Ű±ÙƒŰ©"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr "Ù„Ű§ ÙŠÙˆŰŹŰŻ Ű·Ù„Űš ÙƒÙ„Ù…Ű© ۳۱ في %s Űčلى Ű§Ù„Ù…Ù†ÙŰ° %s"
+msgid "Move selected rule down one level"
+msgstr "Ű§Ù†Ù‚Ù„ Ű§Ù„Ù‚Ű§ŰčŰŻŰ© Ű§Ù„Ù…ŰźŰȘۧ۱۩ Ű§Ù„Ù‰ ŰȘŰ­ŰȘ ŰšÙ…ŰłŰȘوى ÙˆŰ§Ű­ŰŻ"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "ERROR: Cannot spawn %s."
-msgstr "ERROR: Cannot spawn %s."
+msgid "TB"
+msgstr "ŰȘÙŠŰ±Ű§ŰšŰ§ÙŠŰȘ"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr "Ù‚ŰŻ ÙŠŰłŰȘŰșŰ±Ù‚ Ù‡Ű°Ű§ ŰšŰč۶ Ű§Ù„ÙˆÙ‚ŰȘ لŰȘÙˆÙ„ÙŠŰŻ Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­."
+msgid "Please check if you are using a DVDR device"
+msgstr "ÙŰ¶Ù„Ű§ قم ŰšŰ§Ù„ŰȘŰŁŰŽÙŠŰ± Ù‡Ù†Ű§ ۧ۰ۧ كنŰȘ ŰȘŰłŰȘŰźŰŻÙ… ŰŹÙ‡Ű§ŰČ DVDR"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
-"%s Ù…ÙˆŰŹÙˆŰŻ, هل ŰȘŰ±ÙŠŰŻ Ű­Ű°ÙÙ‡ŰŸ\n"
-"\n"
-"ŰȘŰ­Ű°ÙŠŰ±: ۧ۰ۧ قمŰȘ ŰšÙ‡Ű°Ù‡ Ű§Ù„ŰčÙ…Ù„ÙŠŰ© Ù…ŰłŰšÙ‚Ű§Ù‹ ŰșŰ§Ù„ŰšŰ§Ù‹\n"
-" ŰłŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ Ű­Ű°Ù Ű§Ù„Ù…ŰŻŰźÙ„ من authorized_keys Űčلى Ű§Ù„ŰźŰ§ŰŻÙ…."
+msgid "FATAL"
+msgstr "FATAL"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
"\n"
-" DrakBackup Report Details\n"
-"\n"
+"The network address is %s using a netmask of %s.\n"
"\n"
msgstr ""
+"ŰłÙŠŰłÙ…Ű­ ŰźŰ§ŰŻÙ… DHCP Ù„Ù„ÙƒÙ…ŰšÙŠÙˆŰȘ۱ۧŰȘ Ű§Ù„ŰŁŰźŰ±Ù‰ ŰšŰ§Ù„Ű„Ù‚Ù„Ű§Űč ۚۧ۳ŰȘŰźŰŻŰ§Ù… PXE في Ű­ŰŻÙˆŰŻ Ű§Ù„ŰčÙ†Ű§ÙˆÙŠÙ† "
+"Ű§Ù„Ù…Űč۷ۧ۩.\n"
"\n"
-" ŰȘÙŰ§Ű”ÙŠÙ„ ŰȘÙ‚Ű±ÙŠŰ± DrakBackup\n"
-"\n"
+"ŰčÙ†ÙˆŰ§Ù† Ű§Ù„ŰŽŰšÙƒŰ© %s ÙŠŰłŰȘŰźŰŻÙ… netmask %s.\n"
"\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Delete"
+msgstr "Ű„Ù„Űșۧۥ"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"Allow/Forbid reboot by the console user."
msgstr ""
+"Arguments: (arg)\n"
"\n"
-" ŰȘÙ‚Ű±ÙŠŰ± Ù…Ű±Ű§Ù‚Űš DrakBackup\n"
-"\n"
-"\n"
+"Allow/Forbid reboot by the console user."
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
msgstr ""
-"\n"
-" ŰȘÙ‚Ű±ÙŠŰ± DrakBackup \n"
-"\n"
+"يمكنني ŰŹŰčل ŰŹÙ‡Ű§ŰČك ÙŠŰšŰŻŰŁ X ŰšŰŽÙƒÙ„ ŰąÙ„ÙŠ ŰšŰčŰŻ Ű§Ù„Ű„Ù‚Ù„Ű§Űč.\n"
+"هل ŰȘŰ±ÙŠŰŻ X ŰŁÙ† ŰšÙŠŰŻŰŁ ŰšŰčŰŻ Ű„Űčۧۯ۩ ŰȘŰŽŰșيل ŰŹÙ‡Ű§ŰČÙƒŰŸ"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "INFO"
-msgstr "INFO"
+msgid "Build the disk"
+msgstr "ŰŹÙ‡ŰČ Ű§Ù„Ù‚Ű±Ű”"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "FATAL"
-msgstr "FATAL"
+msgid "Disconnect %s"
+msgstr "Ű§Ù‚Ű·Űč Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšÙ€ %s"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "WARNING"
-msgstr "WARNING"
+msgid "Status:"
+msgstr "Ű§Ù„Ű­Ű§Ù„Ű©:"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Cron not available yet as non-root"
-msgstr "Cron ŰșÙŠŰ± مŰȘÙˆÙŰ± Ű­ŰȘى Ű§Ù„ŰąÙ† Ù„Ù„Ù…ŰłŰȘŰźŰŻÙ…ÙŠÙ† ŰșÙŠŰ± Ű§Ù„ŰŹŰ°Ű±"
+msgid "HTTP proxy"
+msgstr "ŰšŰ±ÙˆÙƒŰłÙŠ HTTP"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "ÙŰŽÙ„ ŰȘŰ«ŰšÙŠŰȘ %s. ŰžÙ‡Ű± Ű§Ù„ŰźŰ·ŰŁ Ű§Ù„ŰȘŰ§Ù„ÙŠ:"
+msgid "SSH Server"
+msgstr "ŰźŰ§ŰŻÙ… SSH"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No, I don't want autologin"
-msgstr "Ù„Ű§, Ù„Ű§ ŰŁŰ±ÙŠŰŻ ŰŻŰźÙˆÙ„Ű§ ŰŁÙ„ÙŠŰ§"
+msgid "\t-Network by rsync.\n"
+msgstr "\t-Ű§Ù„ŰŽŰšÙƒŰ© Űčن Ű·Ű±ÙŠÙ‚ rsync.\n"
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "نŰčم, ŰŁŰ±ÙŠŰŻ ŰŻŰźÙˆÙ„Ű§ ŰąÙ„ÙŠŰ§ مŰč Ù‡Ű°Ű§ )Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…, ۳۷ۭ Ű§Ù„Ù…ÙƒŰȘŰš("
+msgid "European protocol"
+msgstr "Ű§Ù„ŰšŰ±ÙˆŰȘوكول Ű§Ù„ŰŁÙˆŰ±ÙˆŰšÙŠ"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "ŰŽŰșّل X-Window ŰčÙ†ŰŻ ۚۯۥ Ű§Ù„ŰȘŰŽŰșيل"
+msgid ", printer \"%s\" on server \"%s\""
+msgstr ", Ű§Ù„Ű·Ű§ŰšŰčŰ© \"%s\" Űčلى Ű§Ù„ŰźŰ§ŰŻÙ… \"%s\""
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
#, c-format
-msgid "System mode"
-msgstr "ÙˆŰ¶Űč Ű§Ù„Ù†ŰžŰ§Ù…"
+msgid "Error"
+msgstr "۟۷ۣ"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Bootsplash"
-msgstr "Bootsplash!"
+msgid "allow \"su\""
+msgstr "Ű§ŰłÙ…Ű­ ŰšÙ€\"su\""
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Lilo screen"
-msgstr "ێۧێ۩ Lilo"
+msgid "Australia"
+msgstr "ŰŁÙˆŰłŰȘŰ±Ű§Ù„ÙŠŰ§"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
-"\n"
-"ۧ۟ŰȘ۱ ŰłÙ…Ű©\n"
-"Lilo و bootsplash,\n"
-"يمكنك ۧ۟ŰȘÙŠŰ§Ű±Ù‡Ù…\n"
-"ŰšŰŽÙƒÙ„ Ù…Ù†ÙŰ”Ù„"
+msgid "please wait during ttmkfdir..."
+msgstr "۱ۏۧۥ Ű§Ù†ŰȘ۞۱ ŰŁŰ«Ù†Ű§ŰĄ ŰčÙ…Ù„ÙŠŰ© ttmkfdir..."
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Themes"
-msgstr "Ű§Ù„ŰłÙ…Ű§ŰȘ"
+msgid "Configure only card \"%s\"%s"
+msgstr "قم ۚۄŰčۯۧۯ Ű§Ù„ŰšŰ·Ű§Ù‚Ű© \"%s\"%s ÙÙ‚Ű·"
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Splash selection"
-msgstr "ۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„ŰŽŰ§ŰŽŰ§ŰȘ"
+msgid "Level"
+msgstr "Ű§Ù„Ù…ŰłŰȘوى"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"ŰŁÙ†ŰȘ ŰȘŰłŰȘŰźŰŻÙ… %s ÙƒÙ…ŰŻÙŠŰ± Ű§Ù‚Ù„Ű§Űč Ű­Ű§Ù„ÙŠŰ§.\n"
-"ۧ۶ŰșŰ· Űčلى ŰȘÙ‡ÙŠŰŠŰ© لŰȘŰŽŰșيل مŰčŰ§Ù„ŰŹ Ű§Ù„Ű„Űčۯۧۯ"
+msgid "Change the printing system"
+msgstr "ŰȘŰșÙŠÙŠŰ± Ù†ŰžŰ§Ù… Ű§Ù„Ű·ŰšŰ§ŰčŰ©"
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr "ŰȘم ŰȘŰ«ŰšÙŠŰȘ ŰłÙ…Ű§ŰȘ LiLo و Bootsplash ŰšÙ†ŰŹŰ§Ű­"
+msgid ""
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
+msgstr ""
+"Ù†ŰžŰ§Ù…Ùƒ ÙŠŰŻŰčم Ű§Ù„Ű„Űčۯۧۯ مŰȘŰčŰŻŰŻ Ű§Ù„Ű±Ű€ÙˆŰł.\n"
+"Ù…Ű§Ű°Ű§ ŰȘŰ±ÙŠŰŻ ŰŁÙ† ŰȘفŰčÙ„ŰŸ"
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
#, c-format
-msgid "Theme installation failed!"
-msgstr "ÙŰŽÙ„ ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„ŰłÙ…Ű§ŰȘ"
+msgid "Configure services"
+msgstr "ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰźŰŻÙ…Ű§ŰȘ"
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Notice"
-msgstr "Ù…Ù„Ű§Ű­ŰžŰ©"
+msgid "Broadcast Address:"
+msgstr "ŰčÙ†ÙˆŰ§Ù† Broadcast:"
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Relaunch 'lilo'"
-msgstr "ŰŁŰčŰŻ ŰȘŰŽŰșيل 'lilo'"
+msgid "mount failed: "
+msgstr "ÙŰŽÙ„ Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„: "
-#: ../../standalone/drakboot:1
-#, c-format
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
msgstr ""
-"ŰȘŰč۰۱ŰȘ ۧŰčۧۯ۩ ŰȘŰŽŰșيل LiLo!\n"
-"ŰŽŰșّل \"lilo\" ÙƒÙ…ŰłŰȘŰźŰŻÙ… ۏ۰۱ في ۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű± و ŰŁÙƒÙ…Ù„ ŰȘŰ«ŰšÙŠŰȘ ŰłÙ…Ű§ŰȘ LiLo."
+"Ù†ÙˆŰ§Ű© ÙŠÙ†ÙƒŰł ŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ ŰȘŰŽŰșيل Ű­Ù„Ù‚Ű© Ű­ŰłŰ§ŰšÙŠŰ© (Calculation Loop) ŰčÙ†ŰŻ Ű§Ù„Ű„Ù‚Ù„Ű§Űč لŰȘÙ†ŰŽÙŠŰ· "
+"ۣۯۧ۩ ŰčŰŻ Ű§Ù„ÙˆÙ‚ŰȘ. يŰȘم Ű­ÙŰž Ű§Ù„Ù†ŰȘÙŠŰŹŰ© كـbogomips ÙƒŰ·Ű±ÙŠÙ‚Ű© للŰȘŰŁÙƒŰŻ من ۔ۭ۩ Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ."
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
-msgstr "ۧۏŰčل initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+msgid "Image"
+msgstr "Ű”ÙˆŰ±Ű©"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr "ŰȘŰč۰۱ ŰȘŰŽŰșيل mkinitrd -f /boot/initrd-%s.img %s."
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
+msgstr "ŰȘŰč۰۱ŰȘ Ű§Ű¶Ű§ÙŰ© Ű§Ù„Ű·Ű§ŰšŰčŰ© \"%s\" Ű§Ù„Ù‰ Star Office/OpenOffice.org/GIMP."
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
+#, c-format
+msgid "Remote Administration"
+msgstr "ۧۯۧ۱۩ Űčن ŰšŰčŰŻ"
+
+#: ../../modules.pm:1
#, c-format
msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
msgstr ""
-"ŰȘŰč۰۱ŰȘ كŰȘۧۚ۩ /etc/sysconfig/bootsplash\n"
-"لم يŰȘم Ű§ÙŠŰŹŰ§ŰŻ Ű§Ù„Ù…Ù„Ù."
+"ŰŻŰčم PCMCIA ŰșÙŠŰ± Ù…ÙˆŰŹÙˆŰŻ ŰšŰčŰŻ Ű§Ù„ŰąÙ† Ù„Ű„Ű”ŰŻŰ§Ű± Ű§Ù„Ù†ÙˆŰ§Ű© 2.2. ÙŰ¶Ù„Ű§ ۧ۳ŰȘŰźŰŻÙ… Ű§Ù„Ű„Ű”ŰŻŰ§Ű± 2.4"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Write %s"
-msgstr "Ű§ÙƒŰȘŰš %s"
+msgid "Selected All"
+msgstr "ŰȘم ۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„ÙƒÙ„"
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr "ŰȘŰč۰۱ŰȘ كŰȘۧۚ۩ /etc/sysconfig/bootsplash."
+msgid "CUPS - Common Unix Printing System"
+msgstr "CUPS - Common Unix Printing System"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Lilo message not found"
-msgstr "لم يŰȘم Ű§ÙŠŰŹŰ§ŰŻ Ű±ŰłŰ§Ù„Ű© Lilo"
+msgid "Webmin Service"
+msgstr "ŰźŰŻÙ…Ű§ŰȘ Webmin"
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Copy %s to %s"
-msgstr "Ű§Ù†ŰłŰź %s Ű§Ù„Ù‰ %s"
+msgid "device"
+msgstr "ÙˆŰ­ŰŻŰ©"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Backup %s to %s.old"
-msgstr "Ű§Ù†ŰłŰź %s ۭۧŰȘÙŠŰ§Ű·ÙŠŰ§Ù‹ Ű§Ù„Ù‰ %s.old"
+msgid "All"
+msgstr "Ű§Ù„ÙƒÙ„"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create new theme"
-msgstr "Ű§Ù†ŰŽŰŠ ŰłÙ…Ű© ŰŹŰŻÙŠŰŻŰ©"
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "ŰŁÙŠ Ù†ŰžŰ§Ù… ۷ۚۧŰčŰ© ŰȘŰ±ÙŠŰŻ ŰŁÙ† ŰȘŰłŰȘŰźŰŻÙ…ŰŸ"
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"ۧŰč۱۶ Ű§Ù„ŰłÙ…Ű§ŰȘ\n"
-"في ۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű±"
+msgid "Greece"
+msgstr "Ű§Ù„ÙŠÙˆÙ†Ű§Ù†"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Install themes"
-msgstr "Ű«ŰšŰȘ Ű§Ù„ŰłÙ…Ű§ŰȘ"
+msgid "An error occurred"
+msgstr "ŰžÙ‡Ű± ۟۷ۣ"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Lilo/grub mode"
-msgstr "ÙˆŰ¶Űč Lilo/grub"
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
+msgstr ""
+"ÙŠŰŹŰš ŰȘŰ±Ù‚ÙŠŰ© Ù‡Ű°Ù‡ Ű§Ù„Ű­ŰČÙ…Ű©.\n"
+"هل ŰŁÙ†ŰȘ مŰȘŰŁÙƒŰŻ ŰŁÙ†Ùƒ Ù„Ű§ ŰȘŰ±ÙŠŰŻ ۧ۟ŰȘÙŠŰ§Ű±Ù‡Ű§ŰŸ"
-#: ../../standalone/drakboot:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Yaboot mode"
-msgstr "ÙˆŰ¶Űč Yaboot"
+msgid "Tamil (Typewriter-layout)"
+msgstr "Ű§Ù„ŰȘŰ§Ù…ÙŠÙ„ (ŰąÙ„Ű© ÙƒŰ§ŰȘۚ۩)"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
+msgid "manual"
+msgstr "ÙŠŰŻÙˆÙŠ"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/File/_Quit"
-msgstr "/ملف/_ŰźŰ±ÙˆŰŹ"
+msgid "Printer manufacturer, model, driver"
+msgstr "Ù…Ű”Ù†Ù‘Űč Ű§Ù„Ű·Ű§ŰšŰčŰ©, Ű§Ù„Ű·Ű±Ű§ŰČ, Ű§Ù„Ù…ŰŽŰșّل"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "/_File"
-msgstr "/_ملف"
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"Ù„Ű§ ÙŠÙˆŰŹŰŻ ÙˆŰłŰ· ŰŁÙˆ Ű±ŰšÙ…Ű§ يكون Ű§Ù„ÙˆŰłŰ· Ù…Ű­Ù…ÙŠ من Ű§Ù„Ù‚Ű±Ű§ŰĄŰ© Ù„Ù„ŰŹÙ‡Ű§ŰČ %s.\n"
+"ÙŰ¶Ù„Ű§Ù‹ Ű§ŰŻŰźÙ„ ÙˆŰłŰ· فى Ű§Ù„ÙˆŰ­ŰŻŰ©."
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Style Configuration"
-msgstr "ۧŰčۯۧۯ ŰŁŰłÙ„ÙˆŰš Ű§Ù„Ű„Ù‚Ù„Ű§Űč"
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
+msgstr ""
+"Ű§Ù„ŰŻÙ„ÙŠÙ„ %s ÙŠŰ­ŰȘوي Ù…ŰłŰšÙ‚Ű§ Űčلى ŰšŰč۶ Ű§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ\n"
+"(%s)"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "No browser available! Please install one"
-msgstr "Ù„Ű§ ÙŠÙˆŰŹŰŻ مŰȘŰ”ÙŰ­ مŰȘÙˆÙŰ±! ÙŰ¶Ù„Ű§Ù‹ قم ŰšŰȘŰ«ŰšÙŠŰȘ مŰȘŰ”ÙŰ­"
+msgid "Printer on NetWare server"
+msgstr "۷ۧۚŰčŰ© Űčلى ŰźŰ§ŰŻÙ… NetWare"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "connecting to Bugzilla wizard ..."
-msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšÙ…ŰčŰ§Ù„ŰŹ Bugzilla ..."
+msgid "Give the ram size in MB"
+msgstr "Ű§ÙƒŰȘŰš Ű­ŰŹÙ… Ű§Ù„Ű°Ű§ÙƒŰ±Ű© ŰšŰ§Ù„Ù…ÙŠŰșŰ§ŰšŰ§ÙŠŰȘ"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Package not installed"
-msgstr "لم يŰȘم ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ű­ŰČÙ…Ű©"
+msgid "Real name"
+msgstr "Ű§Ù„Ű§ŰłÙ… Ű§Ù„Ű­Ù‚ÙŠÙ‚ÙŠ"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Not installed"
-msgstr "ŰșÙŠŰ± Ù…Ű«ŰšÙ‘ŰȘ"
+msgid "done"
+msgstr "Ű§Ù†ŰȘهى"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Standalone Tools"
-msgstr "Ű§Ù„ŰŁŰŻÙˆŰ§ŰȘ Ű§Ù„Ù…Ù†ÙŰ”Ù„Ű©"
+msgid "Please uncheck or remove it on next time."
+msgstr "ÙŰ¶Ù„Ű§Ù‹ قم ۚۄŰČŰ§Ù„Ű© Ű§Ù„ŰȘŰŁŰŽÙŠŰ± ŰŁÙˆ Ű§Ű­Ű°ÙÙ‡Ű§ في Ű§Ù„Ù…Ű±Ű© Ű§Ù„Ù‚Ű§ŰŻÙ…Ű©."
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Report"
-msgstr "ŰȘÙ‚Ű±ÙŠŰ±"
+msgid "Higher"
+msgstr "Ù…Ű±ŰȘفŰč ŰŁÙƒŰ«Ű±"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the partitions you want to format"
+msgstr "ۧ۟ŰȘ۱ Ű§Ù„ŰȘŰŹŰČۊۧŰȘ Ű§Ù„ŰȘي ŰȘŰ±ÙŠŰŻ ŰȘŰŹÙ‡ÙŠŰČÙ‡Ű§"
+
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
+"لم يŰȘم Ű§ÙŠŰŹŰ§ŰŻ ŰšŰ·Ű§Ù‚Ű© ŰȘÙ„ÙŰ§ŰČ Űčلى ŰŹÙ‡Ű§ŰČك. ÙŰ¶Ù„Ű§Ù‹ ŰȘŰŁÙƒŰŻ من ŰŁÙ† ŰšŰ·Ű§Ù‚Ű© Ű§Ù„ÙÙŠŰŻÙŠÙˆ/Ű§Ù„ŰȘÙ„ÙŰ§ŰČ "
+"Ű§Ù„Ù…ŰŻŰčÙˆÙ…Ű© في Ù„ÙŠÙ†ÙƒŰł Ù…ÙˆŰ”ÙˆÙ„Ű© ŰšŰŽÙƒÙ„ Ű”Ű­ÙŠŰ­.\n"
"\n"
"\n"
-"لŰȘŰłÙ„ÙŠÙ… ŰȘÙ‚Ű±ÙŠŰ± Ű§Ù„ŰčÙŠÙˆŰš, ۧ۶ŰșŰ· Űčلى ŰČ۱ ŰȘÙ‚Ű±ÙŠŰ±.\n"
-"ŰłÙŠÙ‚ÙˆÙ… Ù‡Ű°Ű§ ŰšÙ‚ŰȘŰ­ مŰȘŰ”ÙŰ­ ÙˆÙŠŰš Űčلى Ű§Ù„Ű”ÙŰ­Ű© https://drakbug.mandrakesoft.com\n"
-" Ű­ÙŠŰ« ŰłŰȘŰŹŰŻ ۧ۳ŰȘÙ…Ű§Ű±Ű© Űčليك Ù…Ù„Ű€Ù‡Ű§. Ű§Ù„Ù…ŰčÙ„ÙˆÙ…Ű§ŰȘ Ű§Ù„Ù…Ű°ÙƒŰ±Ű© ŰŁŰčÙ„Ű§Ù‡ ŰłÙŠŰȘم Ù†Ù‚Ù„Ù‡Ű§\n"
-"Ű§Ù„Ù‰ Ű°Ù„Ùƒ Ű§Ù„ŰźŰ§ŰŻÙ…\n"
+"يمكنك ŰČÙŠŰ§Ű±Ű© Ù‚Ű§ŰčŰŻŰ© ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„ŰčŰȘۧۯ Ű§Ù„Ù…ŰŻŰčوم Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙ†Ű§ Űčلى:\n"
"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Release: "
-msgstr "Ű§Ù„Ű„Ű”ŰŻŰ§Ű±:"
+msgid "Can't find %s on %s"
+msgstr "ŰȘŰč۰۱ Ű§ÙŠŰŹŰ§ŰŻ %s Űčلى %s"
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Kernel:"
-msgstr "Ű§Ù„Ù†ÙˆŰ§Ű©:"
+msgid "Japanese 106 keys"
+msgstr "Ű§Ù„ÙŠŰ§ŰšŰ§Ù†ÙŠŰ© 106 Ù…ÙŰ§ŰȘÙŠŰ­"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Package: "
-msgstr "Ű§Ù„ŰŹŰČÙ…Ű©: "
+msgid "This will take a few minutes."
+msgstr "ŰłÙŠŰłŰȘŰșŰ±Ù‚ Ù‡Ű°Ű§ ۚ۶Űč ŰŻÙ‚Ű§ŰŠÙ‚."
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Application:"
-msgstr "Ű§Ù„ŰȘŰ·ŰšÙŠÙ‚:"
+msgid "Burkina Faso"
+msgstr "ŰšÙˆŰ±ÙƒÙŠÙ†Ű§ÙŰ§ŰłÙˆ"
-#: ../../standalone/drakbug:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Configuration Wizards"
-msgstr "مŰčŰ§Ù„ŰŹŰ§ŰȘ Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ©"
+msgid "Use scanners on remote computers"
+msgstr "ۧ۳ŰȘŰźŰŻÙ… Ű§Ù„Ù…Ű§ŰłŰ­Ű§ŰȘ Ű§Ù„Ű¶ÙˆŰŠÙŠŰ© Űčلى Ű§Ù„Ű­ÙˆŰ§ÙŠŰłŰš Ű§Ù„ŰšŰčÙŠŰŻŰ©"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
+msgid "Delete selected rule"
+msgstr "Ű§Ű­Ű°Ù Ű§Ù„Ù‚Ű§ŰčŰŻŰ© Ű§Ù„Ù…ŰźŰȘۧ۱۩"
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Windows Migration tool"
-msgstr "ۣۯۧ۩ Ű§Ù„Ű„Ù†ŰȘÙ‚Ű§Ù„ من Windows"
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Űčلى ŰźŰ§ŰŻÙ…Ű§ŰȘ CUPS Ű§Ù„ŰšŰčÙŠŰŻŰ©"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
+msgid "Insert a floppy in %s"
+msgstr "ŰŁŰŻŰźÙ„ Ù‚Ű±Ű” Ù…Ű±Ù† في %s"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Software Manager"
-msgstr "Ù…ŰŻÙŠŰ± Ű§Ù„ŰšŰ±Ű§Ù…ŰŹ"
+msgid "Maldives"
+msgstr "ŰŹŰČ۱ Ű§Ù„Ù…Ű§Ù„ŰŻÙŠÙ"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Remote Control"
-msgstr "Ű§Ù„ŰȘŰ­ÙƒÙ… Űčن ŰšŰčŰŻ"
+msgid "compact"
+msgstr "Ù…ŰŻÙ…ŰŹ"
-#: ../../standalone/drakbug:1
+#: ../../common.pm:1
#, c-format
-msgid "Msec"
-msgstr "Msec"
+msgid "1 minute"
+msgstr "ŰŻÙ‚ÙŠÙ‚Ű© ÙˆŰ§Ű­ŰŻŰ©"
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
+msgid "on channel %d id %d\n"
+msgstr "Űčلى Ű§Ù„Ù‚Ù†Ű§Ű© %d id %d\n"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Mandrake Online"
-msgstr "Mandrake Online"
+msgid ", multi-function device"
+msgstr ", ŰŹÙ‡Ű§ŰČ Ù…ŰȘŰčŰŻŰŻ Ű§Ù„ÙˆŰžŰ§ŰŠÙ"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
+msgid "Laos"
+msgstr "Ù„Ű§ÙˆŰł"
-#: ../../standalone/drakbug:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Synchronization tool"
-msgstr "DrakSync"
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr "Ù„Ű§ ŰȘÙˆŰŹŰŻ ŰȘŰŹŰČŰŠŰ© FAT Ù‚Ű§ŰšÙ„ لŰȘŰșÙŠÙŠŰ± Ű­ŰŹÙ…Ù‡Ű§ (ŰŁÙˆ Ù„Ű§ ŰȘÙˆŰŹŰŻ Ù…ŰłŰ§Ű­Ű© ÙƒŰ§ÙÙŠŰ© مŰȘŰšÙ‚ÙŠŰ©)"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "First Time Wizard"
-msgstr "مŰčŰ§Ù„ŰŹ First Time"
+msgid "Up"
+msgstr "فوق"
-#: ../../standalone/drakbug:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mandrake Control Center"
-msgstr "Ù…Ű±ÙƒŰČ ŰȘŰ­ÙƒÙ… Mandrake"
+msgid "Firewall"
+msgstr "ۏۯۧ۱ Ù†Ű§Ű±ÙŠ"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Mandrake Bug Report Tool"
-msgstr "ۣۯۧ۩ ŰȘÙ‚Ű±ÙŠŰ± Ű§Ù„ŰčÙŠÙˆŰš في Mandrake"
+msgid "Area:"
+msgstr "Ű§Ù„Ù…Ù†Ű·Ù‚Ű© :"
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Parameters"
-msgstr "Parameters"
+msgid "(E)IDE/ATA controllers"
+msgstr "مŰȘŰ­ÙƒÙ…Ű§ŰȘ (E)IDE/ATA"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Configuration"
-msgstr "Ű„ŰčۯۧۯۧŰȘ Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ"
+msgid "Printer Server"
+msgstr "ŰźŰ§ŰŻÙ… Ű§Ù„Ű·Ű§ŰšŰčŰ©"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "DHCP Client"
-msgstr "DHCP Ű§Ù„Űčميل"
+msgid "Disconnection from the Internet complete."
+msgstr "Ű§ÙƒŰȘمل Ù‚Ű·Űč Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ethernet Card"
-msgstr "Ethernet Card"
+msgid "Custom configuration"
+msgstr "ŰȘÙ‡ÙŠŰŠŰ© Ù…ŰźŰ”Ű”Ű©"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Gateway"
-msgstr "Gateway"
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
+"ÙŰ¶Ù„Ű§Ù‹ ۣ۟ۚ۱ Űčن Ù…ÙƒŰ§Ù† Ű”ÙˆŰ±Ű© Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ.\n"
+"\n"
+"ۧ۰ۧ لم يكن Ù‡Ù†Ű§Ùƒ ŰŻÙ„ÙŠÙ„ Ù…ÙˆŰŹÙˆŰŻ, ÙŰ¶Ù„Ű§Ù‹ Ű§Ù†ŰłŰź Ù…Ű­ŰȘÙˆÙŠŰ§ŰȘ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹ ŰŁÙˆ Ù‚Ű±Ű” DVD.\n"
+"\n"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connection type: "
-msgstr "نوŰč Ű§Ù„ŰčÙ„Ű§Ù‚Ű©"
+msgid "Saint Pierre and Miquelon"
+msgstr "ŰłŰ§Ù†ŰȘ ŰšÙŠÙŠŰ± و ميكيلون"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Profile: "
-msgstr "Ű§Ù„ŰȘŰŽÙƒÙŠÙ„:"
+msgid ""
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
+msgstr ""
+"\n"
+"Ù…ŰŽŰ§ÙƒÙ„ ۧ۳ŰȘŰčۧۯ۩ Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠŰ©:\n"
+"\n"
+"ŰŁŰ«Ù†Ű§ŰĄ ŰźŰ·ÙˆŰ© Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ, ŰłÙŠÙ‚ÙˆÙ… Drakbackup ŰšŰ§Ù„ŰȘŰŁÙƒŰŻ من كل Ù…Ù„ÙŰ§ŰȘ\n"
+"Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ Ù‚ŰšÙ„ ۧ۳ŰȘŰčۧۯŰȘÙ‡Ű§.\n"
+"Ù‚ŰšÙ„ Ű§Ù„Ű„ŰłŰȘŰčۧۯ۩ ŰłÙŠÙ‚ÙˆÙ… drakbackup ŰšŰ­Ű°Ù \n"
+"Ű§Ù„ŰŻÙ„ÙŠÙ„ Ű§Ù„ŰŁŰ”Ù„ÙŠ و ŰłŰȘ۟۳۱ كل Ű§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„ŰȘي \n"
+"Űčليه. من Ű§Ù„Ù…Ù‡Ù… ŰŁÙ† ŰȘكون Ű­Ű°Ű±Ű§Ù‹ و Ù„Ű§ ŰȘقوم ŰšŰȘŰčŰŻÙŠÙ„ \n"
+"ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ ÙŠŰŻÙˆÙŠŰ§Ù‹.\n"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Internet connection configuration"
-msgstr "Ű„ŰčۯۧۯۧŰȘ Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ"
+msgid "saving Bootsplash theme..."
+msgstr "ŰŹŰ§Ű±ÙŠ Ű­ÙŰž ŰłÙ…Ű© Bootsplash..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Ù„ÙŠŰłŰȘ Ù„ŰŻÙŠÙƒ ŰŁÙŠ ۧŰȘŰ”Ű§Ù„Ű§ŰȘ Ű„Ù†ŰȘŰ±Ù†ŰȘ.\n"
-"قم ŰšŰčمل ۧŰȘŰ”Ű§Ù„ ŰŁÙˆÙ„Ű§ ۚۧ۳ŰȘŰźŰŻŰ§Ù… 'ŰȘÙ‡ÙŠŰŠŰ©'"
+msgid "Portugal"
+msgstr "Ű§Ù„ŰšŰ±ŰȘŰșŰ§Ù„"
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"لم يŰȘم ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ÙˆŰ§ŰŹÙ‡Ű© ŰšŰčŰŻ.\n"
-"قم ŰšŰȘŰŽŰșيل مŰčŰ§Ù„ŰŹ Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ© في Ű§Ù„Ù†Ű§ÙŰ°Ű© Ű§Ù„Ű±ŰŠÙŠŰłÙŠŰ©"
+msgid "Do you have another one?"
+msgstr "هل ŰčÙ†ŰŻÙƒ ÙˆŰ§Ű­ŰŻŰ© ŰŁŰźŰ±Ù‰ŰŸ"
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "activate now"
-msgstr "قم ŰšŰ§Ù„ŰȘÙ†ŰŽÙŠŰ· Ű§Ù„ŰąÙ†"
+msgid ", printing to %s"
+msgstr ", ŰŹŰ§Ű±ÙŠ Ű§Ù„Ű·ŰšŰ§ŰčŰ© Ű§Ù„Ù‰ %s"
-#: ../../standalone/drakconnect:1
+#: ../../network/network.pm:1
#, c-format
-msgid "deactivate now"
-msgstr "قم ۚۄŰČŰ§Ù„Ű© Ű§Ù„ŰȘÙ†ŰŽÙŠŰ· Ű§Ù„ŰąÙ†"
+msgid "Assign host name from DHCP address"
+msgstr "Űčيّن Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ من ŰčÙ†ÙˆŰ§Ù† DHCP"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DHCP client"
-msgstr "DHCP Ű§Ù„Űčميل "
+msgid "Toggle to normal mode"
+msgstr "Ű§Ù„Ű§Ù†ŰȘÙ‚Ű§Ù„ Ű§Ù„Ù‰ Ű§Ù„ÙˆŰ¶Űč Ű§Ù„ŰčŰ§ŰŻÙŠ"
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Started on boot"
-msgstr "يŰȘم ŰšŰŻŰĄÙ‡ ŰčÙ†ŰŻ Ű§Ù„Ű„Ù‚Ù„Ű§Űč"
+msgid "Generic"
+msgstr "Generic"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Protocol"
-msgstr "ŰšŰ±ÙˆŰȘوكول Ű§Ù„Ű„Ù‚Ù„Ű§Űč"
+msgid "Cylinder %d to %d\n"
+msgstr "Ű§Ù„Ű§ŰłŰ·ÙˆŰ§Ù†Ű© %d Ű§Ù„Ù‰ %d\n"
#: ../../standalone/drakconnect:1
#, c-format
-msgid "Adapter %s: %s"
-msgstr "Ű§Ù„Ù…Ű­ÙˆÙ‘Ù„ %s: %s"
+msgid "New profile..."
+msgstr "ŰȘŰŽÙƒÙŠÙ„ ŰŹŰŻÙŠŰŻ..."
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LAN Configuration"
-msgstr "Ű„Űčۯۧۯ LAN"
+msgid "Which disk do you want to move it to?"
+msgstr "ŰŁÙŠ Ù‚Ű±Ű” ŰȘŰ±ÙŠŰŻ Ù†Ù‚Ù„Ù‡ŰŸ"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "LAN configuration"
-msgstr "Ű„Űčۯۧۯ LAN"
+msgid "Display logo on Console"
+msgstr "ۧŰč۱۶ Ű§Ù„ŰŽŰčۧ۱ في ۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű±"
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"لم ŰȘقم ŰšŰȘÙ‡ÙŠŰŠŰ© ŰŁÙŠ ÙˆŰ§ŰŹÙ‡Ű§ŰȘ.\n"
-"قم ŰšŰȘÙ‡ÙŠŰŠŰȘهم ŰŁÙˆÙ„Ű§ Űčن Ű·Ű±ÙŠÙ‚ Ű§Ù„Ű¶ŰșŰ· Űčلى 'ŰȘÙ‡ÙŠŰŠŰ©'"
+msgid "Windows Domain"
+msgstr "Ù†Ű·Ű§Ù‚ Windows"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Connect..."
-msgstr "ۧŰȘŰ”Ù„..."
+msgid "Interface %s (on network %s)"
+msgstr "Ű§Ù„ÙˆŰ§ŰŹÙ‡Ű© %s (Űčلى Ű§Ù„ŰŽŰšÙƒŰ© %s)"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Disconnect..."
-msgstr "Ű§Ù‚Ű·Űč Ű§Ù„Ű„ŰȘŰ”Ű§Ù„..."
+msgid "INFO"
+msgstr "INFO"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not connected"
-msgstr "ŰșÙŠŰ± مŰȘŰ”Ù„"
+msgid "Wallis and Futuna"
+msgstr "ÙˆŰ§Ù„ÙŠŰł و فوŰȘÙˆÙ†Ű§"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Connected"
-msgstr "مŰȘÙ‘Ű”Ù„"
+msgid "Need to create /etc/dhcpd.conf first!"
+msgstr "Ù„Ű§ ۭۧۏ۩ Ű§Ù„Ù‰ Ű§Ù†ŰŽŰ§ŰĄ /etc/dhcpd.conf ŰŁÙˆÙ„Ű§Ù‹!"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr "ŰȘŰ­Ű°ÙŠŰ±, ŰȘم Ű§ÙŠŰŹŰ§ŰŻ ۧŰȘŰ”Ű§Ù„ Ű„Ù†ŰȘŰ±Ù†ŰȘ ۹۟۱, Ű±ŰšÙ…Ű§ يكون ÙŠŰłŰȘŰźŰŻÙ… ŰŽŰšÙƒŰȘك"
+msgid "Is FPU present"
+msgstr "هل FPU Ù…ÙˆŰŹÙˆŰŻ"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Interface:"
-msgstr "Ű§Ù„ÙˆŰ§ŰŹÙ‡Ű©:"
+msgid "There are no scanners found which are available on your system.\n"
+msgstr "Ù„Ű§ ŰȘÙˆŰŹŰŻ Ù…Ű§ŰłŰ­Ű§ŰȘ Ű¶ÙˆŰŠÙŠŰ© مŰȘÙˆÙŰ±Ű© Űčلى Ù†ŰžŰ§Ù…Ùƒ.\n"
-#: ../../standalone/drakconnect:1
+#: ../../services.pm:1
#, c-format
-msgid "Gateway:"
-msgstr "Ű§Ù„ŰšÙˆŰ§ŰšŰ©:"
+msgid ""
+"No additional information\n"
+"about this service, sorry."
+msgstr ""
+"ŰčÙÙˆŰ§Ù‹, Ù„Ű§ ŰȘÙˆŰŹŰŻ مŰčÙ„ÙˆÙ…Ű§ŰȘ\n"
+"Ű§Ű¶Ű§ÙÙŠŰ© Ű­ŰČل Ù‡Ű°Ù‡ Ű§Ù„Ű­ŰČÙ…Ű©."
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Apply"
-msgstr "ŰȘŰ·ŰšÙŠÙ‚"
+msgid "Build Single NIC -->"
+msgstr "Ű§ŰšÙ†ÙŠ NIC ÙˆŰ§Ű­ŰŻŰ© -->"
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Click here to launch the wizard ->"
-msgstr "Ű§Ù†Ù‚Ű± Ù‡Ù†Ű§ لŰȘŰŽŰșيل Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ ->"
+msgid "Is this correct?"
+msgstr "هل Ù‡Ű°Ű§ Ű”Ű­ÙŠŰ­ ? "
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Wizard..."
-msgstr "Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ..."
+msgid "Marshall Islands"
+msgstr "ŰŹŰČ۱ Ù…Ű§Ű±ŰŽŰ§Ù„"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Status:"
-msgstr "Ű§Ù„Ű­Ű§Ù„Ű©:"
+msgid "Windows (FAT32)"
+msgstr "Windows (FAT32)"
-#: ../../standalone/drakconnect:1
+#: ../../steps.pm:1
#, c-format
-msgid "Type:"
-msgstr "Ű§Ù„Ù†ÙˆŰč:"
+msgid "Root password"
+msgstr "ÙƒÙ„Ù…Ű© Ù…Ű±ÙˆŰ± Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… Ű§Ù„ŰŹŰ°Ű±"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Internet access"
-msgstr "Ű§Ù„ŰŻŰźÙˆÙ„ Ű§Ù„Ù‰ Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ"
+msgid "Build All Kernels -->"
+msgstr "Ű§ŰšÙ†ÙŠ كل ۧ۔ۯۧ۱ۧŰȘ Ű§Ù„Ù†ÙˆŰ§Ű© -->"
-#: ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Hostname: "
-msgstr "Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ :"
+msgid "if set to yes, report unowned files."
+msgstr "if set to yes, report unowned files."
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Ű„Űčۯۧۯ Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ©..."
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"Ù„ÙŠŰłŰȘ Ù„ŰŻÙŠÙƒ ŰȘŰŹŰČŰŠŰ© ŰȘŰšŰŻÙŠÙ„.\n"
+"\n"
+"هل ŰȘŰ±ÙŠŰŻ Ű§Ù„Ù…ŰȘۧۚŰčŰ© Űčلى ŰŁÙŠ Ű­Ű§Ù„ŰŸ"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "State"
-msgstr "Ű§Ù„Ű­Ű§Ù„Ű©"
+msgid "Server IP missing!"
+msgstr "IP Ű§Ù„ŰźŰ§ŰŻÙ… Ù…ÙÙ‚ÙˆŰŻ!"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Driver"
-msgstr "Ű§Ù„Ù…Ű­Ű±Ùƒ"
+msgid "Suriname"
+msgstr "ŰłÙˆŰ±ÙŠÙ†Ű§Ù…"
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "Protocol"
-msgstr "Ű§Ù„ŰšŰ±ÙˆŰȘوكول"
+msgid "Enable ACPI"
+msgstr "ŰȘمكين ACPI"
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "Interface"
-msgstr "Ű§Ù„ÙˆŰ§ŰŹÙ‡Ű©"
+msgid "Graphical Environment"
+msgstr "ŰšÙŠŰŠŰ§ŰȘ Ű±ŰłÙˆÙ…ÙŠŰ©"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configure Internet Access..."
-msgstr "Ű„Űčۯۧۯ Ű§Ù„ŰŻŰźÙˆÙ„ Ű§Ù„Ù‰ Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ..."
+msgid "Gibraltar"
+msgstr "ŰŹŰšÙ„ Ű·Ű§Ű±Ù‚"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Wait please"
-msgstr "Ű§Ù„Ű§Ù†ŰȘ۞ۧ۱ من ÙŰ¶Ù„Ùƒ"
+msgid "on Tape Device"
+msgstr "Űčلى Ű§Ù„ŰŽŰ±ÙŠŰ·"
-#: ../../standalone/drakconnect:1
+#: ../../network/modem.pm:1
#, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Ù„Ű„ŰłÙ… Ű§Ù„ŰȘŰŽÙƒÙŠÙ„ Ű§Ù„Ű°ÙŠ ŰłŰȘŰčمله (Ű§Ù„ŰȘŰŽÙƒÙŠÙ„ Ű§Ù„ŰŹŰŻÙŠŰŻ يŰȘم Űčمله ÙƒÙ†ŰłŰźŰ© من Ű§Ù„ŰȘŰŽÙƒÙŠÙ„ Ű§Ù„Ű­Ű§Ù„ÙŠ) :"
+msgid "Do nothing"
+msgstr "Ù„Ű§ ŰȘفŰčل ŰŽÙŠŰŠŰ§Ù‹"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "New profile..."
-msgstr "ŰȘŰŽÙƒÙŠÙ„ ŰŹŰŻÙŠŰŻ..."
+msgid "Delete Client"
+msgstr "Ű§Ű­Ű°Ù Ű§Ù„Űčميل"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Profile to delete:"
-msgstr "Ű§Ù„ŰȘŰŽÙƒÙŠÙ„ Ű§Ù„Ù…Ű·Ù„ÙˆŰš Ű­Ű°ÙÙ‡:"
+msgid "Filesystem type: "
+msgstr "نوŰč Ù†ŰžŰ§Ù… Ű§Ù„Ù…ÙŰ§ŰȘ: "
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Del profile..."
-msgstr "Ű§Ű­Ű°Ù Ű§Ù„ŰȘŰŽÙƒÙŠÙ„..."
+msgid "Starting network..."
+msgstr "ŰŹŰ§Ű±ÙŠ ۚۯۥ Ű§Ù„ŰŽŰšÙƒŰ©..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "ۧŰčۯۧۯۧŰȘ Ű§Ù„ŰŽŰšÙƒŰ© (%d Ù…ÙˆŰ§ŰŠÙ…Ű§ŰȘ)"
+msgid "Vietnam"
+msgstr "فييŰȘÙ†Ű§Ù…"
-#: ../../standalone/drakedm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
-"Ù…ŰŻÙŠŰ± Űč۱۶ X11 ÙŠŰłÙ…Ű­ لك ŰšŰȘŰłŰŹÙŠÙ„ Ű§Ù„ŰŻŰźÙˆÙ„ Ű§Ù„Ù‰\n"
-"Ù†ŰžŰ§Ù…Ùƒ مŰč ŰȘŰŽŰșيل ŰźŰ§ŰŻÙ… Ű§Ù„Ù†ÙˆŰ§ÙŰ° X و ÙŠŰŻŰčم ŰȘŰŽŰșيل\n"
-"ŰčŰŻŰ© ŰŹÙ„ŰłŰ§ŰȘ X Ù…ŰźŰȘÙ„ÙŰ© Űčلى Ù…Ű§ÙƒÙŠÙ†ŰȘك Ű§Ù„Ù…Ű­Ù„ÙŠŰ© في Ù†ÙŰł Ű§Ù„ÙˆÙ‚ŰȘ."
+msgid "/_Fields description"
+msgstr "/_ÙˆŰ”Ù Ű§Ù„Ű­Ù‚ÙˆÙ„"
-#: ../../standalone/drakedm:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "Choosing a display manager"
-msgstr "ŰŹŰ§Ű±ÙŠ ۧ۟ŰȘÙŠŰ§Ű± Ù…ŰŻÙŠŰ± Ű§Ù„Űč۱۶"
+msgid "Optimize your security by using Mandrake Linux"
+msgstr "Ű­ŰłÙ‘Ù† Ù…ŰłŰȘوى Ű§Ù„ŰŁÙ…Ù†"
-#: ../../standalone/drakfloppy:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
-msgstr ""
-"ŰȘŰč۰۱ Űșلق mkbootdisk: \n"
-" %s \n"
-" %s"
+msgid "Help"
+msgstr "Ù…ŰłŰ§ŰčŰŻŰ©"
-#: ../../standalone/drakfloppy:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Unable to fork: %s"
-msgstr "ŰȘŰč۰۱ ŰȘÙ†ÙÙŠŰ°: %s"
+msgid "Your personal phone number"
+msgstr "Ű±Ù‚Ù… Ű§Ù„Ù‡Ű§ŰȘف Ű§Ù„ŰŽŰźŰ”ÙŠ Ű§Ù„ŰźŰ§Ű” ŰšÙƒ"
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Which size do you want to keep for Windows on"
+msgstr "Űčلى ŰŁÙŠ Ù…ŰłŰ§Ű­Ű© ŰȘŰ±ÙŠŰŻ Ű­ÙŰž Windows"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
msgstr ""
-"Ù„Ű§ ÙŠÙˆŰŹŰŻ ÙˆŰłŰ· ŰŁÙˆ Ű±ŰšÙ…Ű§ يكون Ű§Ù„ÙˆŰłŰ· Ù…Ű­Ù…ÙŠ من Ű§Ù„Ù‚Ű±Ű§ŰĄŰ© Ù„Ù„ŰŹÙ‡Ű§ŰČ %s.\n"
-"ÙŰ¶Ù„Ű§Ù‹ Ű§ŰŻŰźÙ„ ÙˆŰłŰ· فى Ű§Ù„ÙˆŰ­ŰŻŰ©."
+"ŰȘم Ű§Ű±ŰłŰ§Ù„ Ű§Ù„Ű”ÙŰ­Ű§ŰȘ Ű§Ù„Ű„ŰźŰȘŰšŰ§Ű±ÙŠŰ© Ű§Ù„Ù‰ Ű§Ù„Ű·Ű§ŰšŰčŰ©.\n"
+"Ù‚ŰŻ ÙŠŰłŰȘŰșŰ±Ù‚ Ù‡Ű°Ű§ ŰšŰč۶ Ű§Ù„ÙˆÙ‚ŰȘ Ű­ŰȘى ŰȘۚۯۣ Ű§Ù„Ű·Ű§ŰšŰčŰ©.\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "ŰȘŰŁÙƒŰŻ من ÙˆŰŹÙˆŰŻ Ű§Ù„ÙˆŰłÙŠŰ· Ù„Ù„ÙˆŰ­ŰŻŰ© %s"
+msgid "Username required"
+msgstr "ÙŠÙŰ­ŰȘۧۏ Ű§Ù„Ù‰ Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…"
-#: ../../standalone/drakfloppy:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
+msgstr ""
+"ۧŰčŰȘÙ…Ű§ŰŻŰ§Ù‹ Űčلى Ű§Ù„Ù„ŰșŰ© ۧ?فŰȘŰ±Ű§Ű¶ÙŠŰ© Ű§Ù„ŰȘي ۧ۟ŰȘ۱ŰȘÙ‡Ű§ في Ù‡Ű°Ű§ Ű§Ù„Ù‚ŰłÙ…, ŰłÙŠÙ‚ÙˆÙ… DrakX\n"
+"ۚۧ۟ŰȘÙŠŰ§Ű± ŰȘÙ‡ÙŠŰŠŰ© Ù„ÙˆŰ­Ű© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­ ŰąÙ„ÙŠŰ§Ù‹. ŰčÙ…ÙˆÙ…Ű§Ù‹,\n"
+"Ű±ŰšÙ…Ű§ Ù„ÙŠŰłŰȘ Ù„ŰŻÙŠÙƒ Ù„ÙˆŰ­Ű© Ù…ÙŰ§ŰȘÙŠŰ­ Ù…Ù‚Ű§ŰšÙ„Ű© ŰšŰŽÙƒÙ„ Ù…ŰšŰ§ŰŽŰ± للŰșŰȘك:\n"
+"Ù…Ű«Ù„Ű§Ù‹ Ű±ŰšÙ…Ű§ ŰȘكون ŰčŰ±ŰšÙŠŰ§Ù‹ مŰȘÙƒÙ„Ù…Ű§Ù‹ ŰšŰ§Ù„Ù„ŰșŰ© ۧ?Ù†ŰŹÙ„ÙŠŰČÙŠŰ©, Ű±ŰšÙ…Ű§ ŰȘكون Ù„ŰŻÙŠÙƒ\n"
+"Ù„ÙˆŰ­Ű© Ù…ÙŰ§ŰȘÙŠŰ­ ŰłÙˆÙŠŰłŰ±ÙŠŰ©. ۧ۰ۧ كنŰȘ ŰȘŰȘكلم ۧ?Ù†ŰŹÙ„ÙŠŰČÙŠŰ© لكن Ù…ÙˆŰŹÙˆŰŻ في ÙƒÙŠŰšÙƒ, Ű±ŰšÙ…Ű§\n"
+"ŰȘŰŹŰŻ Ù†ÙŰłÙƒ في Ù†ÙŰł Ű§Ù„Ù…ÙˆÙ‚Ù Ű­ÙŠŰ« ? ŰȘŰȘŰ·Ű§ŰšÙ‚ لŰșŰȘك مŰč Ù„ÙˆŰ­Ű© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­.\n"
+"في Ű§Ù„Ű­Ű§Ù„ŰȘين, ŰłŰȘŰłÙ…Ű­ لك ŰźŰ·ÙˆŰ© Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ ŰłŰȘŰłÙ…Ű­ لك ۚۧ۟ŰȘÙŠŰ§Ű±\n"
+"Ù„ÙˆŰ­Ű© Ù…ÙŰ§ŰȘÙŠŰ­ Ù…Ù†Ű§ŰłŰšŰ© من Ű§Ù„Ù‚Ű§ŰŠÙ…Ű©.\n"
+"\n"
+"Ű§Ù†Ù‚Ű± ŰČ۱ \"Ű§Ù„Ù…ŰČÙŠŰŻ\" لŰč۱۶ Ù‚Ű§ŰŠÙ…Ű© ŰšÙƒÙ„ Ù„ÙˆŰ­Ű§ŰȘ Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­\n"
+"Ű§Ù„Ù…ŰŻŰčÙˆÙ…Ű©.\n"
+"\n"
+"ۧ۰ۧ ۧ۟ŰȘ۱ŰȘ Ù„ÙˆŰ­Ű© Ù…ÙŰ§ŰȘÙŠŰ­ Ù„Ű­Ű±ÙˆÙ ŰșÙŠŰ± ?ŰȘÙŠÙ†ÙŠŰ©, ÙŰłÙŠŰłÙ…Ű­ لك\n"
+"Ù…Ű±ŰšŰč Ű§Ù„Ű­ÙˆŰ§Ű± Ű§Ù„ŰȘŰ§Ù„ÙŠ ۚۧ۟ŰȘÙŠŰ§Ű± ۧ۟ŰȘ۔ۧ۱ۧŰȘ Ù„ÙˆŰ­Ű© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­ Ű§Ù„ŰȘي\n"
+"ŰłŰȘŰșÙŠŰ± ÙˆŰ¶Űč Ù„ÙˆŰ­Ű© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­ ŰšÙŠÙ† Ű§Ù„Ű­Ű±ÙˆÙ Ű§Ù„Ù„Ű§ŰȘÙŠÙ†ÙŠŰ© و Ű§Ù„ŰșÙŠŰ± ?ŰȘÙŠÙ†ÙŠŰ©."
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build the disk"
-msgstr "ŰŹÙ‡ŰČ Ű§Ù„Ù‚Ű±Ű”"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "ŰźÙŠŰ§Ű±Ű§ŰȘ ۷ۧۚŰčŰ© SMB (Windows 9x/NT)"
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Output"
-msgstr "Ű§Ù„Ù†Ű§ŰȘŰŹ"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Remove a module"
-msgstr "ۧŰČŰ§Ù„Ű© ÙˆŰ­ŰŻŰ©"
+msgid "mkinitrd optional arguments"
+msgstr "mkinitrd Ű§Ù„ŰźŰ”Ű§ŰŠŰ” Ű§Ù„Ű§ŰźŰȘÙŠŰ§Ű±ÙŠŰ©"
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Add a module"
-msgstr "Ű§Ű¶Ű§ÙŰ© ÙˆŰ­ŰŻŰ©"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "omit scsi modules"
-msgstr "SCSI Ű§Ù‡Ù…Ù„ ÙˆŰ­ŰŻŰ§ŰȘ Ű§Ù„"
+msgid "Protocol for the rest of the world"
+msgstr "ŰšŰ±ÙˆŰȘوكول Ù„ŰšÙ‚ÙŠŰ© Ű§Ù„ŰčŰ§Ù„Ù…"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "if needed"
-msgstr "ۧ۰ۧ ۭۧŰȘŰŹŰȘه"
+msgid "Print test pages"
+msgstr "ۧ۷ۚŰč Ű”ÙŰ­Ű§ŰȘ ۧ۟ŰȘŰšŰ§Ű±ÙŠŰ©"
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "omit raid modules"
-msgstr "RAID Ű§Ù‡Ù…Ù„ ÙˆŰ­ŰŻŰ§ŰȘ Ű§Ù„"
+msgid "64 MB or more"
+msgstr "64 ميŰșŰ§ŰšŰ§ÙŠŰȘ ŰŁÙˆ ŰŁÙƒŰ«Ű±"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "force"
-msgstr "ۧۏۚۧ۱"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
+"ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ Ű§Ù„Ű”ÙŰ­Ű§ŰȘ Ű§Ù„Ű„ŰźŰȘŰšŰ§Ű±ÙŠŰ© Ű§Ù„ŰȘي ŰȘÙˆŰŻ ۷ۚۧŰčŰȘÙ‡Ű§.\n"
+"Ù…Ù„Ű­ÙˆŰžŰ©: Ű§Ù„Ű”ÙŰ­Ű© Ű§Ù„Ű„ŰźŰȘŰšŰ§Ű±ÙŠŰ© Ù„Ű”ÙˆŰ±Ű© ŰłŰȘŰłŰȘŰșŰ±Ù‚ وقŰȘŰ§Ù‹ Ű·ÙˆÙŠÙ„Ű§Ù‹ Ù„Ű·ŰšŰ§ŰčŰȘÙ‡Ű§ و Űčلى ۷ۧۚŰčۧŰȘ "
+"Ű§Ù„Ù„ÙŠŰČ۱ ŰšÙƒÙ…ÙŠŰ© Ű°Ű§ÙƒŰ±Ű© Ù‚Ù„ÙŠÙ„Ű© Ù‚ŰŻ Ù„Ű§ يŰȘم ۷ۚۧŰčŰȘÙ‡Ű§ Ù…Ű·Ù„Ù‚Ű§Ù‹. في ŰŁŰșÙ„Űš Ű§Ù„ŰŁŰ­ÙŠŰ§Ù† يكفي ŰŁÙ† "
+"ŰȘŰ·ŰšŰč Ű§Ù„Ű”ÙŰ­Ű© Ű§Ù„Ű„ŰźŰȘŰšŰ§Ű±ÙŠŰ© Ű§Ù„Ù‚ÙŠŰ§ŰłÙŠŰ©."
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "mkinitrd optional arguments"
-msgstr "mkinitrd Ű§Ù„ŰźŰ”Ű§ŰŠŰ” Ű§Ù„Ű§ŰźŰȘÙŠŰ§Ű±ÙŠŰ©"
+msgid "Please select the device where your %s is attached"
+msgstr "ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ Ű§Ù„ŰŹÙ‡Ű§ŰČ Ű§Ù„Ù…ŰȘŰ”Ù„ ŰšÙ‡ %s"
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Expert Area"
-msgstr "Ù…Ù†Ű·Ù‚Ű© Ű§Ù„ŰźŰšŰ±Ű§ŰĄ"
+msgid "Not formatted\n"
+msgstr "ŰșÙŠŰ± Ù…ŰŹÙ‡ŰČ\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "kernel version"
-msgstr "ۧ۔ۯۧ۱۩ Ű§Ù„Ù„Űš"
+msgid "Periodic Checks"
+msgstr "ŰȘŰŁÙƒŰŻ ŰŻÙˆŰ±ÙŠ"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "default"
-msgstr "Ű§Ù„Ù…Ű±ŰŹŰč"
+msgid "PXE Server Configuration"
+msgstr "ŰȘÙ‡ÙŠŰŠŰ© ŰźŰ§ŰŻÙ… PXE"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "General"
-msgstr "ŰčŰ§Ù…"
+msgid "Backup the system files before:"
+msgstr "Ű§Ù†ŰłŰź Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ù†ŰžŰ§Ù… Ù‚ŰšÙ„:"
-#: ../../standalone/drakfloppy:1
+#: ../../security/level.pm:1
#, c-format
-msgid "boot disk creation"
-msgstr "Ű”Ù†Űč Ù‚Ű±Ű” Ù…Ű±Ù† Ù„ŰšŰŻŰĄ Ű§Ù„Ù†ŰžŰ§Ù…"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"Ù‡Ű°Ű§ هو Ű§Ù„Ù…ŰłŰȘوى Ű§Ù„ŰŁÙ…Ù†ÙŠ Ű§Ù„Ù‚ÙŠŰ§ŰłÙŠ Ù„Ù„Ű­Ű§ŰłÙˆŰš Ű§Ù„Ű°ÙŠ ŰłÙŠŰłŰȘŰźŰŻÙ… Ù„Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ كŰčميل."
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
#, c-format
-msgid "drakfloppy"
-msgstr "ŰŻŰ±ÙŠÙƒ Ù„Ù„Ű§Ù‚Ű±Ű§Ű” Ű§Ù„Ù…Ű±Ù†Ű©"
+msgid "First floppy drive"
+msgstr "ŰłÙˆŰ§Ù‚Ű© Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…Ű±Ù† Ű§Ù„ŰŁÙˆÙ„Ù‰"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Size"
-msgstr "Ű­ŰŹÙ…"
+msgid "/File/_Quit"
+msgstr "/ملف/_ŰźŰ±ÙˆŰŹ"
-#: ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Module name"
-msgstr "Ű§ŰłÙ… Ű§Ù„ÙˆŰ­ŰŻŰ©"
+msgid "Dvorak"
+msgstr "Dvorak"
-#: ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Post Uninstall"
-msgstr "Ù…Ű§ ŰšŰčŰŻ ۧŰČŰ§Ù„Ű© Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ"
+msgid "Choose the new size"
+msgstr "ۧ۟ŰȘ۱ Ű§Ù„Ű­ŰŹÙ… Ű§Ù„ŰŹŰŻÙŠŰŻ"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Remove fonts on your system"
-msgstr "Ű§Ű­Ű°Ù Ű§Ù„ŰźŰ·ÙˆŰ· من Ű§Ù„Ù†ŰžŰ§Ù…"
+msgid "Media class"
+msgstr "ÙŰŠŰ© Ű§Ù„ÙˆŰłÙŠŰ·"
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Initial tests"
-msgstr "Ű§Ù„Ű„ŰźŰȘۚۧ۱ۧŰȘ Ű§Ù„ŰŁÙˆÙ„ÙŠŰ©"
+msgid "The %s is not known by this version of Scannerdrake."
+msgstr "Ű§Ù„Ù€ %s ŰșÙŠŰ± مŰčŰ±ÙˆÙ من Ù‚ŰšÙ„ Ù‡Ű°Ű§ Ű§Ù„Ű„Ű”ŰŻŰ§Ű± من Scannerdrake."
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Post Install"
-msgstr "Ù…Ű§ ŰšŰčŰŻ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ"
+msgid "Faroe Islands"
+msgstr "ŰŹŰČ۱ Ű§Ù„ÙÙŠŰ±Ùˆ"
#: ../../standalone/drakfont:1
#, c-format
-msgid "Install & convert Fonts"
-msgstr "Ű«ŰšÙ‘ŰȘ و Ű­ÙˆÙ‘Ù„ Ű§Ù„ŰźŰ·ÙˆŰ·"
+msgid "Restart XFS"
+msgstr "ŰŁŰčŰŻ ŰȘŰŽŰșيل XFS"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Copy fonts on your system"
-msgstr "Ű§Ù†ŰłŰź Ű§Ù„ŰźŰ·ÙˆŰ· Ű§Ù„Ù‰ Ù†ŰžŰ§Ù…Ùƒ"
+msgid "Add host/network"
+msgstr "ŰŁŰ¶Ù Ù…ŰłŰȘŰ¶ÙŠÙ/ŰŽŰšÙƒŰ©"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Remove List"
-msgstr "Ű§Ű­Ű°Ù Ű§Ù„Ù‚Ű§ŰŠÙ…Ű©"
+msgid ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
+msgstr ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Selected All"
-msgstr "ŰȘم ۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„ÙƒÙ„"
+msgid "Please enter the directory to save to:"
+msgstr "ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ Ű§Ù„ŰŻÙ„ÙŠÙ„ Ű§Ù„Ű°ÙŠ ŰłÙŠŰȘم Ű§Ù„Ű­ÙŰž فيه:"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Unselected All"
-msgstr "ŰȘم ۧŰČŰ§Ù„Ű© ۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„ÙƒÙ„"
+msgid "Model name"
+msgstr "Ű§ŰłÙ… Ű§Ù„Ű·Ű±Ű§ŰČ"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "here if no."
-msgstr "ۄ۶ŰșŰ· Ù‡Ù†Ű§ ۄ۰ۧ لم ŰȘكن مŰȘŰŁÙƒŰŻŰ§."
+msgid "Albania"
+msgstr "ŰŁÙ„ŰšŰ§Ù†ÙŠŰ§"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "click here if you are sure."
-msgstr "ۧ۶ŰșŰ· Ù‡Ù†Ű§ ۄ۰ۧ كنŰȘ مŰȘŰŁÙƒŰŻŰ§."
+msgid "No CDR/DVDR in drive!"
+msgstr "Ù„Ű§ ÙŠÙˆŰŹŰŻ Ù‚Ű±Ű” CD-R/DVD-R في Ű§Ù„ŰłÙˆŰ§Ù‚Ű©"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Install List"
-msgstr "Ű«ŰšÙ‘ŰȘ Ű§Ù„Ù‚Ű§ŰŠÙ…Ű©"
+msgid "British Indian Ocean Territory"
+msgstr "Ù…Ù†Ű·Ù‚Ű© ŰŹŰČ۱ Ű§Ù„Ù…Ű­ÙŠŰ· Ű§Ù„Ù‡Ű§ŰŻÙŠ Ű§Ù„ŰšŰ±ÙŠŰ·Ű§Ù†ÙŠŰ©"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "ۧ۟ŰȘ۱ ملف ŰŁÙˆ ŰŻÙ„ÙŠÙ„ Ű§Ù„ŰźŰ·ÙˆŰ· و ۧ۶ŰșŰ· 'Ű§Ű¶Ű§ÙŰ©'"
+msgid "Normal Mode"
+msgstr "ÙˆŰ¶Űč ŰčŰ§ŰŻÙŠ"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
+"Please be sure that the cron daemon is included in your services. \n"
"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-"Ù‚ŰšÙ„ ŰȘŰ«ŰšÙŠŰȘ ŰŁÙŠ ŰźŰ·ÙˆŰ· ŰȘŰŁÙƒŰŻ ŰŁÙ†Ù‡ Ù„ŰŻÙŠÙƒ Ű§Ù„Ű­Ù‚ ۚۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡Ù… و ŰȘŰ«ŰšÙŠŰȘهم Űčلى Ű§Ù„Ù†ŰžŰ§Ù….\n"
+"ŰȘŰŁÙƒŰŻ من ŰŁÙ† Ù…Ű±Ű§Ù‚Űš cron Ù…ÙˆŰŹÙˆŰŻ Ű¶Ù…Ù† ŰźŰŻÙ…Ű§ŰȘ Ű§Ù„Ù†ŰžŰ§Ù…. \n"
"\n"
-"-يمكنك ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„ŰźŰ·ÙˆŰ· ŰšŰ§Ù„Ű·Ű±ÙŠÙ‚Ű© Ű§Ù„ŰčŰ§ŰŻÙŠŰ©. في Ű­Ű§Ù„Ű§ŰȘ Ù†Ű§ŰŻŰ±Ű©, Ù‚ŰŻ ŰȘŰȘ۳ۚۚ Ű§Ù„ŰźŰ·ÙˆŰ· "
-"Ű§Ù„Ù…ŰČÙŠÙŰ© في ŰȘŰčليق ŰźŰ§ŰŻÙ… X."
+"Ù„Ű§Ű­Űž ŰŁÙ† كل ÙˆŰłŰ§ŰŠŰ· Ű§Ù„ŰŽŰšÙƒŰ© ŰȘŰłŰȘŰźŰŻÙ… Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš."
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generic Printers"
-msgstr "۷ۧۚŰčۧŰȘ ŰčŰ§ŰŻÙŠŰ© (Generic)"
+msgid "Printer connection type"
+msgstr "نوŰč ÙˆŰ”Ù„Ű© Ű§Ù„Ű·Ű§ŰšŰčŰ©"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Abiword"
-msgstr "Abiword"
+msgid "No network adapter on your system!"
+msgstr "Ù„Ű§ Ù…ÙˆŰ§ŰŠÙ… ŰŽŰšÙƒŰ© Űčلى Ù†ŰžŰ§Ù…Ùƒ"
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
+msgid "Network %s"
+msgstr "Ű§Ù„ŰŽŰšÙƒŰ© %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
+msgid "Malayalam"
+msgstr "Ű§Ù„Ù…Ű§Ù„Ű§ÙŠŰ§Ù„Ű§Ù…"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "ۧ۟ŰȘ۱ Ű§Ù„ŰȘŰ·ŰšÙŠÙ‚Ű§ŰȘ Ű§Ù„ŰȘي ŰłŰȘŰŻŰčم Ű§Ù„ŰźŰ·ÙˆŰ· :"
+msgid "Option %s out of range!"
+msgstr "Ű§Ù„ŰźÙŠŰ§Ű± %s ۟ۧ۱ۏ Ű§Ù„Ù…ŰȘÙˆŰłŰ·!"
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
-"\n"
-"ŰŹÙ…ÙŠŰč Ű§Ù„Ű­Ù‚ÙˆÙ‚ Ù…Ű­ÙÙˆŰžŰ© (C) 2001-2002 لـMandrakeSoft \n"
-"\tDUPONT Sebastien (Ű§Ù„Ű„Ű”ŰŻŰ§Ű± Ű§Ù„ŰŁŰ”Ù„ÙŠ)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" Ù‡Ű°Ű§ Ű§Ù„ŰšŰ±Ù†Ű§Ù…ŰŹ هو ŰšŰ±Ù†Ű§Ù…ŰŹ ۭ۱; يمكنك ۧŰčۧۯ۩ ŰȘوŰČيŰčŰ© و/ŰŁÙˆ ŰȘŰčŰŻÙŠÙ„Ù‡\n"
-" ŰȘŰ­ŰȘ ŰšÙ†ÙˆŰŻ ۱۟۔۩ GNU Ű§Ù„ŰčÙ…ÙˆÙ…ÙŠŰ© Ű§Ù„ŰŽŰ§Ù…Ù„Ű© (GPL) ÙƒÙ…Ű§ Ù†ÙŰŽÙŰ±ŰȘ Űčن Ű·Ű±ÙŠÙ‚\n"
-" ŰŹÙ…ŰčÙŠŰ© Ű§Ù„ŰšŰ±Ù…ŰŹÙŠŰ§ŰȘ Ű§Ù„Ű­Ű±Ű©; Ű„Ù…Ű§ ۧۄ۔ۯۧ۱ Ű§Ù„Ű«Ű§Ù†ÙŠ من Ű§Ù„ŰȘŰ±ŰźÙŠŰ” ŰŁÙˆ\n"
-" ŰŁÙŠ Ù†ŰłŰźŰ© ŰȘŰ§Ù„ÙŠŰ© (ۭ۳ۚ ۧ۟ŰȘÙŠŰ§Ű±Ùƒ).\n"
-"\n"
-" Ù‡Ű°Ű§ Ű§Ù„ŰšŰ±Ù†Ű§Ù…ŰŹ يُوŰČَّŰč Űčلى ŰŁÙ…Ù„ ŰŁÙ† يكون Ù…ÙÙŠŰŻŰ§,\n"
-" لكن ŰŻÙˆÙ† ŰŁÙŠ Ű¶Ù…Ű§Ù†â€™; Ű­ŰȘى ŰšŰŻÙˆÙ† Ű§Ù„Ű¶Ù…Ű§Ù†Ű© Ű§Ù„Ù…ÙÙ‡ÙˆÙ…Ű©\n"
-" Ù„Ù„Ű„ŰȘۏۧ۱ ŰŁÙˆ Ű§Ù„Ù…Ù†Ű§ŰłŰšŰ© لŰș۱۶ مŰčين. Ű§Ù†ŰžŰ±\n"
-" ۱۟۔۩ GNU Ű§Ù„ŰčÙ…ÙˆÙ…ÙŠŰ© Ű§Ù„ŰŽŰ§Ù…Ù„Ű© للŰȘÙŰ§Ű”ÙŠÙ„.\n"
-"\n"
-" ÙŠŰŹŰš ŰŁÙ† ŰȘكون Ù‚ŰŻ ŰȘŰłÙ„Ù…ŰȘ Ù†ŰłŰźŰ© من ŰȘŰ±ŰźÙŠŰ” GNU Ű§Ù„ŰčÙ…ÙˆÙ…ÙŠŰ© Ű§Ù„ŰŽŰ§Ù…Ù„Ű©\n"
-" مŰč Ű§Ù„ŰšŰ±Ù†Ű§Ù…ŰŹ; في Ű­Ű§Ù„Ű© ŰčŰŻÙ… ŰȘŰłÙ„Ù… Ű§Ù„Ű±ŰźŰ”Ű© Ű±Ű§ŰłÙ„ ŰŹÙ…ŰčÙŠŰ© Ű§Ù„ŰšŰ±Ù…ŰŹÙŠŰ§ŰȘ Ű§Ù„Ű­Ű±Ű© Űčلى "
-"Ű§Ù„ŰčÙ†ÙˆŰ§Ù† Ű§Ù„ŰȘŰ§Ù„ÙŠ\n"
-" Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA "
-"02111-1307, USA.\n"
-"\n"
-" ŰŽÙƒŰ± ۟ۧ۔ Ű§Ù„Ù‰:\n"
-" - pfm2afm: \n"
-"\t من Ken Borgendale:\n"
-"\t ÙŠŰ­ÙˆÙ‘Ù„ ŰźŰ·ÙˆŰ· .pfm في Windows Ű§Ù„Ù‰ ŰźŰ·ÙˆŰ· .afm (Adobe Font Matrix)\n"
-" - type1inst:\n"
-"\t من James Macnicol: \n"
-"\t ÙŠÙˆÙ„ŰŻ type1inst Ù…Ù„ÙŰ§ŰȘ fonts.dir و fonts.scale و Fontmap.\n"
-" - ttf2pt1: \n"
-"\t من Andrew Weeks, Frank Siegert, Thomas Henlich و Sergey Babkin \n"
-" ÙŠŰ­ÙˆÙ„ ŰźŰ·ÙˆŰ· ttf Ű§Ù„Ù‰ ŰźŰ·ÙˆŰ· afm و pfb\n"
+msgid "Connect %s"
+msgstr "ۧŰȘŰ”Ù„ ŰšÙ€ %s"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "About"
-msgstr "Ű­ÙˆÙ„"
+msgid "Restarting CUPS..."
+msgstr "ŰŹŰ§Ű±ÙŠ ۧŰčۧۯ۩ ŰȘŰŽŰșيل CUPS..."
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Font List"
-msgstr "Ù‚Ű§ŰŠÙ…Ű© Ű§Ù„ŰźŰ·ÙˆŰ·"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "Printing/Scanning/Photo Cards on \"%s\""
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Advanced Options"
-msgstr "ŰźÙŠŰ§Ű±Ű§ŰȘ مŰȘÙ‚ŰŻÙ…Ű©"
+msgid "Duplicate mount point %s"
+msgstr "Ù†Ù‚Ű·Ű© ŰȘŰ­Ù…ÙŠÙ„ Ù…ÙƒŰ±Ű±Ù‘Ű© %s"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Uninstall Fonts"
-msgstr "Ű§ŰźŰ°Ù Ű§Ù„ŰźŰ·ÙˆŰ·"
+msgid "if set to yes, run chkrootkit checks."
+msgstr "if set to yes, run chkrootkit checks."
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Get Windows Fonts"
-msgstr "Ű§Ű­Ű”Ù„ Űčلى ŰźŰ·ÙˆŰ· Windows"
+msgid "Connection Configuration"
+msgstr "ۧŰčۯۧۯۧŰȘ Ű§Ù„ÙˆŰ”Ù„Ű©"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Import Fonts"
-msgstr "ۧ۳ŰȘÙŠŰ±Ű§ŰŻ Ű§Ù„ŰźŰ·ÙˆŰ·"
+msgid "Unknown|Generic"
+msgstr "ŰșÙŠŰ± مŰčŰ±ÙˆÙ|ŰčŰ§Ù…"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
+msgstr ""
+"في Ű§Ù„ÙˆÙ‚ŰȘ Ű§Ù„Ű°ÙŠ ŰȘقوم فيه ŰšŰȘŰ«ŰšÙŠŰȘ Mandrake Linux, Ù‚ŰŻ يكون ŰȘم ŰȘŰ­ŰŻÙŠŰ«\n"
+"ŰšŰč۶ Ű§Ù„Ű­ŰČم Ù…Ù†Ű° ۧ?۔ۯۧ۱ Ű§Ù„Ù…ŰšŰŻŰŠÙŠ, Ű±ŰšÙ…Ű§ يكون ŰȘم Ű§Ű”Ù„Ű§Ű­ ŰšŰč۶ Ű§Ù„ŰčÙŠÙˆŰš\n"
+"ŰŁÙˆ ŰȘم Ű­Ù„ Ű§Ù„Ù…ŰŽŰ§ÙƒÙ„ ۧ?Ù…Ù†ÙŠŰ©. لكي ŰȘŰłŰȘÙÙŠŰŻ من Ù‡Ű°Ù‡ Ű§Ù„ŰȘŰ­ŰŻÙŠŰ«Ű§ŰȘ,يمكنك\n"
+"ۧ?ن ŰȘنŰČيل Ù‡Ű°Ù‡ Ű§Ù„ŰȘŰ­ŰŻÙŠŰ«Ű§ŰȘ Űčۚ۱ ۧ?نŰȘŰ±Ù†ŰȘ. ۧ۟ŰȘ۱\n"
+"\"نŰčم\" ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ù„ŰŻÙŠÙƒ ÙˆŰ”Ù„Ű© Ű§Ù†ŰȘŰ±Ù†ŰȘ ŰčŰ§Ù…Ù„Ű©, ŰŁÙˆ \"?\" ۧ۰ۧ كنŰȘ ŰȘÙŰ¶Ù„\n"
+"ŰȘŰ«ŰšÙŠŰȘ Ù‡Ű°Ù‡ Ű§Ù„ŰȘŰ­ŰŻÙŠŰ«Ű§ŰȘ ?Ű­Ù‚Ű§Ù‹.\n"
+"\n"
+"ۧ۟ŰȘÙŠŰ§Ű± \"نŰčم\" يŰč۱۶ Ù‚Ű§ŰŠÙ…Ű© ۚۧ?Ù…Ű§ÙƒÙ† Ű§Ù„ŰȘي يمكن Ù…Ù†Ù‡Ű§ Ű§Ù„Ű­Ű”ÙˆÙ„\n"
+"Űčلى Ű§Ù„ŰȘŰ­ŰŻÙŠŰ«Ű§ŰȘ. ۧ۟ŰȘ۱ Ű§Ù„Ù…ÙƒŰ§Ù† Ű§Ù„ŰŁÙ‚Ű±Űš Ű§Ù„ÙŠÙƒ. ŰłÙŠŰȘم Űč۱۶ Ù‚Ű§ŰŠÙ…Ű© ŰšŰ§Ù„Ű­ŰČم\n"
+"۱ۧۏŰč ۧ۟ŰȘÙŠŰ§Ű±Ű§ŰȘك, Ű«Ù… ۧ۶ŰșŰ· \"Ű«ŰšÙ‘ŰȘ\" لŰȘنŰČيل و ŰȘŰ«ŰšÙŠŰȘ\n"
+"Ű§Ù„Ű­ŰČم Ű§Ù„Ù…ŰźŰȘۧ۱۩, ŰŁÙˆ \"Ű§Ù„Űșۧۥ\" ?ۭۚۧ۷ Ű§Ù„ŰȘŰ­ŰŻÙŠŰ«."
+
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "done"
-msgstr "Ű§Ù†ŰȘهى"
+msgid "Quit"
+msgstr "ŰźŰ±ÙˆŰŹ"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "xfs restart"
-msgstr "xfs restart"
+msgid "Myanmar"
+msgstr "Ù…ÙŠŰ§Ù†Ù…Ű§Ű±"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Suppress Fonts Files"
-msgstr "ŰŁŰšŰ·Ù„ Ù…Ù„ÙŰ§ŰȘ Ű§Ù„ŰźŰ·ÙˆŰ·"
+msgid "Auto allocate"
+msgstr "ŰȘŰ­ŰŻÙŠŰŻ ŰąÙ„ÙŠ"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restart XFS"
-msgstr "ŰŁŰčŰŻ ŰȘŰŽŰșيل XFS"
+msgid "Check bad blocks?"
+msgstr "ŰȘŰ­Ù‚Ù‚ من Ű§Ù„ŰšÙ„ÙˆÙƒŰ§ŰȘ Ű§Ù„ŰłÙŠŰŠŰ©ŰŸ"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Suppress Temporary Files"
-msgstr "ŰŁŰšŰ·Ù„ Ű§Ù„Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ù…Ű€Ù‚ŰȘŰ©"
+msgid "Other MultiMedia devices"
+msgstr "ŰŁŰŹÙ‡ŰČ ÙˆŰłŰ§ŰŠŰ· مŰȘŰčŰŻŰŻŰ© ŰŁŰźŰ±Ù‰"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "type1inst building"
-msgstr "ŰšÙ†Ű§ŰĄ type1inst"
+msgid "No remote machines"
+msgstr "Ù„Ű§ ŰŁŰŹÙ‡ŰČŰ© ŰšŰčÙŠŰŻŰ©"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "pfm fonts conversion"
-msgstr "ŰȘŰ­ÙˆÙŠÙ„ ŰźŰ·ÙˆŰ· pfm"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"ŰŁÙ‡Ù„Ű§Ù‹ ŰšÙƒÙ… في مŰčŰ§Ù„ŰŹ ۧŰčۯۧۯ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ\n"
+"\n"
+"Ù‡Ű°Ű§ Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ ŰłÙŠŰłŰ§ŰčŰŻÙƒ Űčلى ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ű·Ű§ŰšŰčŰ©/Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…ÙˆŰ”ÙˆÙ„Ű© ŰšÙ‡Ű°Ű§ Ű§Ù„ÙƒÙ…ŰšÙŠÙˆŰȘ۱.\n"
+"\n"
+"ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ù„ŰŻÙŠÙƒ ۷ۧۚŰčŰ©/۷ۧۚŰčۧŰȘ Ù…ÙˆŰ”ÙˆÙ„Ű© ŰšÙ‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű©, ÙŰ¶Ù„Ű§Ù‹ قم ŰšŰȘÙˆŰ”ÙŠÙ„Ù‡Ű§ Ű§Ù„Ù‰ Ù‡Ű°Ű§ "
+"Ű§Ù„ÙƒÙ…ŰšÙŠÙˆŰȘ۱ و قم ŰšŰȘŰŽŰșÙŠÙ„Ù‡Ű§ كي يŰȘم Ű§Ù„ŰȘŰ­Ù‚Ù‚ Ù…Ù†Ù‡Ű§/منهم ŰąÙ„ÙŠŰ§Ù‹.\n"
+"\n"
+" Ű§Ù†Ù‚Ű± \"Ű§Ù„ŰȘŰ§Ù„ÙŠ\" ŰčÙ†ŰŻÙ…Ű§ ŰȘكون Ù…ŰłŰȘŰčŰŻŰ§Ù‹, و Űčلى \"Ű§Ù„Űșۧۥ\" ۧ۰ۧ لم ŰȘكن ŰȘŰ±ÙŠŰŻ ۧŰčۯۧۯ "
+"Ű§Ù„Ű·Ű§ŰšŰčŰ©/Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„ŰąÙ†."
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "ttf fonts conversion"
-msgstr "ŰȘŰ­ÙˆÙŠÙ„ ŰźŰ·ÙˆŰ· ttf"
+msgid "Authentication NIS"
+msgstr "ŰȘŰ­Ù‚Ù‚ NIS"
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Ghostscript referencing"
-msgstr "Ghostscript referencing"
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr "ŰźÙŠŰ§Ű± ``ŰȘŰŽŰŻÙŠŰŻ ŰźÙŠŰ§Ű±Ű§ŰȘ ۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű±`` ŰšŰŻÙˆÙ† Ù‚Ű§ŰŠŰŻŰ© من ŰŻÙˆÙ† ÙƒÙ„Ù…Ű© Ù…Ű±ÙˆŰ±"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Fonts conversion"
-msgstr "ŰȘŰ­ÙˆÙŠÙ„ Ű§Ù„ŰźŰ·ÙˆŰ·"
+msgid "Internet Connection Sharing currently enabled"
+msgstr "Ù…ŰŽŰ§Ű±ÙƒŰ© Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ Ù…Ù…ÙƒÙ†Ű© Ű­Ű§Ù„ÙŠŰ§"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "True Type install done"
-msgstr "ŰȘم ŰȘŰ«ŰšÙŠŰȘ ŰźŰ·ÙˆŰ· True Type"
+msgid "Card IO_0"
+msgstr "Card IO_0"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "۱ۏۧۥ Ű§Ù†ŰȘ۞۱ ŰŁŰ«Ù†Ű§ŰĄ ŰčÙ…Ù„ÙŠŰ© ttmkfdir..."
+msgid "United Arab Emirates"
+msgstr "Ű§Ù„Ű„Ù…Ű§Ű±Ű§ŰȘ Ű§Ù„ŰčŰ±ŰšÙŠŰ© Ű§Ù„Ù…ŰȘŰ­ŰŻŰ©"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "True Type fonts installation"
-msgstr "ŰȘŰ«ŰšÙŠŰȘ ŰźŰ·ÙˆŰ· True Type"
+msgid "Card IO_1"
+msgstr "Card IO_1"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Fonts copy"
-msgstr "نقل Ű§Ù„ŰźŰ·ÙˆŰ·"
+msgid "Thailand"
+msgstr "ŰȘŰ§ÙŠÙ„Ű§Ù†ŰŻ"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Search for fonts in installed list"
-msgstr "ۭۧۚ۫ Űčن Ű§Ù„ŰźŰ·ÙˆŰ· في Ű§Ù„Ù‚Ű§ŰŠÙ…Ű© Ű§Ù„Ù…Ű«ŰšŰȘŰ©"
+msgid "Routers:"
+msgstr "Ű§Ù„Ù…ÙˆŰŹÙ‡Ű§ŰȘ:"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "could not find any font.\n"
-msgstr "لم ŰŁŰȘمكن من Ű„ÙŠŰŹŰ§ŰŻ ŰŁÙŠ ۟۷.\n"
+msgid "Kazakhstan"
+msgstr "ÙƒŰ§ŰČۧ۟۳ŰȘŰ§Ù†"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Reselect correct fonts"
-msgstr "ŰŁŰčŰŻ ۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„ŰźŰ·ÙˆŰ· Ű§Ù„Ű”Ű­ÙŠŰ­Ű©"
+msgid "Display all available remote CUPS printers"
+msgstr "ۧŰč۱۶ كل ۷ۧۚŰčۧŰȘ CUPS Ű§Ù„ŰšŰčÙŠŰŻŰ© Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű©"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_newt.pm:1
#, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr "لم ŰŁŰȘمكن من Ű§ÙŠŰŹŰ§ŰŻ ŰŁÙŠ ŰźŰ·ÙˆŰ· في ŰȘŰŹŰČۊۧŰȘك Ű§Ù„Ù…Ű­Ù…Ù„Ű©"
+msgid "Mandrake Linux Installation %s"
+msgstr "ŰȘŰ«ŰšÙŠŰȘ Mandrake Linux %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "no fonts found"
-msgstr "Ù„Ű§ ŰȘÙˆŰŹŰŻ ŰźŰ·ÙˆŰ·"
+msgid "Thai keyboard"
+msgstr "Ù„ÙˆŰ­Ű© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­ Ű§Ù„ŰȘŰ§ÙŠÙ„Ű§Ù†ŰŻÙŠŰ©"
-#: ../../standalone/drakfont:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "parse all fonts"
-msgstr "ŰȘŰ­Ù„ÙŠÙ„ كل Ű§Ù„ŰźŰ·ÙˆŰ·"
+msgid "Dialup options"
+msgstr "ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„Ű„ŰȘŰ”Ű§Ù„"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unselect fonts installed"
-msgstr "Ű§Ű­Ű°Ù ۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„ŰźŰ·ÙˆŰ· Ű§Ù„Ù…Ű«ŰšŰȘŰ©"
+msgid "Bouvet Island"
+msgstr "ŰŹŰČÙŠŰ±Ű© ŰšÙˆÙÙŠÙ‡"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Search installed fonts"
-msgstr "ۭۧۚ۫ في Ű§Ù„ŰźŰ·ÙˆŰ· Ű§Ù„Ù…Ű«ŰšŰȘŰ©"
+msgid "If no port is given, 631 will be taken as default."
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
+"Change your Cd-Rom!\n"
"\n"
-"Click on Configure to launch the setup wizard."
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
-"ŰŁÙ‡Ù„Ű§ ŰšÙƒ في ۣۯۧ۩ Ù…ŰŽŰ§Ű±ÙƒŰ© Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ!\n"
-"\n"
-"%s\n"
+"ŰșÙŠŰ± Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹ!\n"
"\n"
-"ۧ۶ŰșŰ· Űčلى ŰȘÙ‡ÙŠŰŠŰ© لŰȘŰŽŰșيل مŰčŰ§Ù„ŰŹ Ű§Ù„Ű„Űčۯۧۯ."
+"ÙŰ¶Ù„Ű§Ù‹ ŰŁŰŻŰźÙ„ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹ Ű§Ù„Ù…ŰłÙ…Ù‰ \"%s\" في Ű§Ù„ŰłÙˆŰ§Ù‚Ű© و Ű§Ù†Ù‚Ű± Ù…ÙˆŰ§ÙÙ‚ ŰčÙ†ŰŻÙ…Ű§ ŰȘنŰȘهي.\n"
+"ۧ۰ۧ لم يكن Ű§Ù„Ù‚Ű±Ű” Ù„ŰŻÙŠÙƒ, ۧ۶ŰșŰ· Ű§Ù„Űșۧۥ لŰȘŰŹÙ†Űš Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ من Ù‡Ű°Ű§ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹ."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "Ű„ŰčۯۧۯۧŰȘ Ù…ŰŽŰ§Ű±ÙƒŰ© Ű„ŰȘŰ”Ű§Ù„ Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ"
+msgid "Polish"
+msgstr "Ű§Ù„ŰšÙˆÙ„Ù†ŰŻÙŠŰ©"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "لم يŰȘم ۧŰčۯۧۯ ŰŁÙŠ Ù…ŰŽŰ§Ű±ÙƒŰ© ۧŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ"
+msgid "Mandrake Online"
+msgstr "Mandrake Online"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "ŰȘم Űčمل Ű§Ù„ŰȘÙ†Ű”ÙŠŰš, و هو ممكَّن Ű§Ù„ŰąÙ†."
+msgid "\t-Network by webdav.\n"
+msgstr "\t-Ű§Ù„ŰŽŰšÙƒŰ© Űčن Ű·Ű±ÙŠÙ‚ webdav.\n"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "ŰȘم Űčمل Ű§Ù„ŰȘÙ†Ű”ÙŠŰš, و لكنه ŰșÙŠŰ± ممكَّن Ű§Ù„ŰąÙ†"
+msgid ""
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
+msgstr ""
+"لم يŰȘم Ű§ÙƒŰȘŰŽŰ§Ù Ù…ÙˆŰ§ŰŠÙ… Ű§ÙŠŰ«Ű±Ù†ŰȘ Űčلى Ù†ŰžŰ§Ù…Ùƒ. ÙŰ¶Ù„Ű§Ù‹ قم ŰšŰȘŰŽŰșيل ۣۯۧ۩ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰčŰȘۧۯ."
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"ŰȘم Ű„Űčۯۧۯ كل ŰŽŰŠ.\n"
-"يمكنك Ű§Ù„ŰąÙ† Ù…ŰŽŰ§Ű±ÙƒŰ© ۧŰȘŰ”Ű§Ù„ Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ مŰč Ű§Ù„ŰŁŰŹÙ‡ŰČŰ© Ű§Ù„ŰŁŰźŰ±Ù‰ في ŰŽŰšÙƒŰȘك Ű§Ù„Ù…Ű­Ù„ÙŠŰ© ۚۧ۳ŰȘŰźŰŻŰ§Ù… "
-"Ű„Űčۯۧۯ Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„ŰŁÙˆŰȘÙˆÙ…Ű§ŰȘيكي (DHCP)."
+msgid "Netmask"
+msgstr "Netmask"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Problems installing package %s"
-msgstr "ÙƒŰ§Ù†ŰȘ Ù‡Ù†Ű§Ùƒ Ù…ŰŽŰ§ÙƒÙ„ في ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ű­ŰČÙ…Ű© %s"
+msgid "No hard drives found"
+msgstr "نŰč۰۱ Ű§ÙŠŰŹŰ§ŰŻ ŰŁÙ‚Ű±Ű§Ű” Ű”Ù„ŰšŰ©"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "ŰŹŰ§Ű±ÙŠ Ű„Űčۯۧۯ Ű§Ù„Ù†Ű”ÙˆŰ” Ű§Ù„ŰšŰ±Ù…ŰŹÙŠŰ© و ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„ŰšŰ±Ù…ŰŹÙŠŰ§ŰȘ و ۚۯۥ Ű§Ù„ŰźŰŻÙ…Ű§ŰȘ..."
+msgid "Logitech CC Series"
+msgstr "Logitech CC Series"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring..."
-msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„Ű„Űčۯۧۯ..."
+msgid "2 buttons"
+msgstr "ŰČŰ±Ù‘ÙŠÙ†"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"ŰȘم Ű§ÙŠŰŹŰ§ŰŻ ŰȘŰčۧ۱۶ في ŰčÙ†ÙˆŰ§Ù† Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ© Ű§Ù„Ù…ŰšŰŻŰŠÙŠ في Ű§Ù„Ű„Űčۯۧۯ Ű§Ù„Ű­Ű§Ù„ÙŠ لـ%s!\n"
+msgid "What kind is your ISDN connection?"
+msgstr "Ù…Ű§ هو نوŰč ÙˆŰ”Ù„Ű© ISDN Ù„ŰŻÙŠÙƒŰŸ"
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ© لم ŰȘنŰȘه ŰšÙ€`0', ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰźŰ±ÙˆŰŹ."
+msgid "Label"
+msgstr "ŰčÙ†ÙˆŰ§Ù†"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "Ű„Űčۧۯ۩ Ű„Űčۯۧۯ Ű§Ù„ÙˆŰ§ŰŹÙ‡Ű© و ŰźŰ§ŰŻÙ… DHCP"
+msgid "Save on floppy"
+msgstr "Ű§Ű­ÙŰž Űčلى Ù‚Ű±Ű” Ù…Ű±Ù†"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr "Ű§Ù„Ű„ÙŠŰŹŰ§Ű± Ű§Ù„ŰŁÙ‚Ű”Ù‰ (ŰšŰ§Ù„Ű«ÙˆŰ§Ù†ÙŠ)"
+msgid "Printer auto-detection"
+msgstr "ŰȘŰ­Ù‚Ù‚ ŰąÙ„ÙŠ من Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The default lease (in seconds)"
-msgstr "Ű§Ù„Ű„ÙŠŰŹŰ§Ű± Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠ (ŰšŰ§Ù„Ű«ÙˆŰ§Ù†ÙŠ)"
+msgid "Which of the following is your ISDN card?"
+msgstr "ŰŁÙŠ من Ű§Ù„ŰąŰȘي هي ŰšŰ·Ű§Ù‚Ű© ISDN Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙƒŰŸ"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
-msgid "The DHCP end range"
-msgstr "Ű­ŰŻÙˆŰŻ DHCP end"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
+msgstr ""
+"NFS ŰšŰ±ÙˆŰȘوكول ێۧۊŰč Ù„Ù…ŰŽŰ§Ű±ÙƒŰ© Ű§Ù„Ù…Ù„ÙŰ§ŰȘ Űčلى ŰŽŰšÙƒŰ§ŰȘ TCP/IP.\n"
+"Ù‡Ű°Ù‡ Ű§Ù„ŰźŰŻÙ…Ű© ŰȘÙˆÙŰ± ÙˆŰžŰ§ŰŠÙ NFS Ù„Ù„ŰŁŰŹÙ‡ŰČŰ© Ű§Ù„ŰźŰ§ŰŻÙ…Ű©, و Ű§Ù„ŰȘي يŰȘم ŰȘÙ‡ÙŠŰŠŰȘÙ‡Ű§ Űčن Ű·Ű±ÙŠÙ‚\n"
+"ملف /etc/exports."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The DHCP start range"
-msgstr "Ű­ŰŻÙˆŰŻ DHCP start"
+msgid "Msec"
+msgstr "Msec"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "The internal domain name"
-msgstr "Ű§ŰłÙ… Ű§Ù„Ù†Ű·Ű§Ù‚ Ű§Ù„ŰŻŰ§ŰźÙ„ÙŠ"
+msgid ""
+"=> Notice, a label changed:\n"
+"%s"
+msgstr ""
+"=> Notice, a label changed:\n"
+"%s"
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "The DNS Server IP"
-msgstr "ŰčÙ†ÙˆŰ§Ù† IP Ù„ŰźŰ§ŰŻÙ… DNS"
+msgid "Number of capture buffers:"
+msgstr "Number of capture buffers:"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "ŰčÙ†ÙˆŰ§Ù† IP Ù„ŰźŰ§ŰŻÙ… DHCP (Ù‡Ű°Ű§)"
+msgid "Your choice? (0/1, default `%s') "
+msgstr "Your choice? (0/1, default `%s') "
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"DHCP Server Configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
"\n"
-msgstr ""
-"ŰȘÙ‡ÙŠŰŠŰ© ŰźŰ§ŰŻÙ… DHCP.\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
"\n"
-"Ù‡Ù†Ű§ يمكنك ۧ۟ŰȘÙŠŰ§Ű± ŰźÙŠŰ§Ű±Ű§ŰȘ Ù…ŰźŰȘÙ„ÙŰ© لŰȘÙ‡ÙŠŰŠŰ© ŰźŰ§ŰŻÙ… DHCP.\n"
-"ۧ۰ۧ لم ŰȘكن نهلم Ù…Ű§Ű°Ű§ يŰčني Ű§Ù„ŰźÙŠŰ§Ű± فكل Ù…Ű§ Űčليك هو ŰȘŰ±ÙƒÙ‡ ÙƒÙ…Ű§ هو.\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
+"\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
"\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Local Network adress"
-msgstr "ŰčÙ†ÙˆŰ§Ù† Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ©"
+msgid "French"
+msgstr "Ű§Ù„ÙŰ±Ù†ŰłÙŠŰ©"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
-"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
-"\n"
-msgstr ""
-"يمكنني Ű­ÙŰž Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ© و Ű§ÙŰȘ۱ۧ۶ ŰŁÙ†Ùƒ قمŰȘ ۚۄŰčۯۧۯ ŰźŰ§ŰŻÙ… DHCP Ù…ŰłŰšÙ‚Ű§Ù‹; في Ù‡Ű°Ù‡ Ű§Ù„Ű­Ű§Ù„ "
-"ŰȘŰŁÙƒŰŻ من ŰŁÙ†Ù†ÙŠ ŰŁŰłŰȘŰ·ÙŠŰč Ù‚Ű±Ű§ŰĄŰ© Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„ŰȘي ŰȘŰłŰȘŰźŰŻÙ…Ù‡Ű§ Ù„Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ© ŰšŰŽÙƒÙ„ Ű”Ű­ÙŠŰ­; "
-"ŰłŰŁÙ‚ÙˆÙ… ۚۄŰčۧۯ۩ ŰȘÙ‡ÙŠŰŠŰȘÙ‡Ű§ و لن ŰŁÙ‚ÙˆÙ… ŰšŰŁÙŠ ŰŽŰŠ ŰȘŰŹŰ§Ù‡ ŰȘÙ‡ÙŠŰŠŰ© ŰźŰ§ŰŻÙ… DHCP.\n"
-"\n"
-"Ù…ŰŻŰźÙ„ DNS Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠ هو Ű§ŰłÙ… Ű§Ù„ŰźŰ§ŰŻÙ… Ű§Ù„Ù…ŰźŰšŰŠÙŠ Űčلى Ű§Ù„ŰŹŰŻŰ§Ű± Ű§Ù„Ù†Ű§Ű±ÙŠ. يمكنك Ű§ŰšŰŻŰ§Ù„ Ű°Ù„Ùƒ "
-"ŰšŰčÙ†ÙˆŰ§Ù† IP للـDNS Ű§Ù„ŰźŰ§Ű” ŰšÙ…ÙˆÙŰ± ŰźŰŻÙ…Ű© Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ, Ù…Ű«Ù„.\n"
-"\t\t \n"
-"Ű§Ù† لم يكن Ű°Ù„Ùƒ, يمكنني ۧŰčۯۧ۩ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ÙˆŰ§ŰŹÙ‡Ű© و ۧŰčۯۧ۩ ŰȘÙ‡ÙŠŰŠŰ© ŰźŰ§ŰŻÙ… DHCP لك.\n"
-"\n"
+msgid "Czech (QWERTY)"
+msgstr "Ű§Ù„ŰȘŰŽÙŠÙƒÙŠŰ© (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
+#, c-format
+msgid "Hardware probing in progress"
+msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰȘŰ­Ù‚Ù‚ من Ű§Ù„ŰčŰȘۧۯ"
#: ../../standalone/drakgw:1
#, c-format
+msgid "Net Device"
+msgstr "ŰŹÙ‡Ű§ŰČ Ű§Ù„ŰŽŰšÙƒŰ©"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Summary"
+msgstr "Ù…Ù„ŰźŰ”"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
-"Ű§Ù„Ű„Űčۯۧۯ Ű§Ù„Ű­Ű§Ù„ÙŠ لـ`%s':\n"
-"\n"
-"Ű§Ù„ŰŽŰšÙƒŰ©: %s\n"
-"ŰčÙ†ÙˆŰ§Ù† Ű§Ù„Ù€IP: %s\n"
-"Ű”ÙŰ© Ű§Ù„Ù€IP: %s\n"
-"Ű§Ù„Ù…ŰŽŰșل: %s"
+" (Ű§Ù„Ù…Ù†Ű§ÙŰ° Ű§Ù„Ù…ŰȘÙˆŰ§ŰČÙŠŰ©: /dev/lp0, /dev/lp1, ..., Ù…Ù…Ű§ŰŽÙ„ لـ LPT1:, LPT2:, ..., "
+"۷ۧۚŰčŰ© USB Ű§Ù„ŰŁÙˆÙ„ÙŠ: /dev/usb/lp0, ۷ۧۚŰčŰ© USB Ű§Ù„Ű«Ű§Ù†ÙŠŰ©: /dev/usb/lp1, ...)"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Current interface configuration"
-msgstr "ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ÙˆŰ§ŰŹÙ‡Ű© Ű§Ù„Ű­Ű§Ù„ÙŠŰ©"
+msgid "Next"
+msgstr "Ű§Ù„ŰȘŰ§Ù„ÙŠ"
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Show current interface configuration"
-msgstr "ŰŁŰžÙ‡Ű± ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ÙˆŰ§ŰŹÙ‡Ű© Ű§Ù„Ű­Ű§Ù„ÙŠŰ©"
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "يمكنك ŰȘŰ«ŰšÙŠŰȘ Ù…Ű­Ù…Ù‘Ù„ Ű§Ù„Ű„Ù‚Ù„Ű§Űč Űčلى Ű§Ù„ŰȘŰŹŰČŰŠŰ© %s\n"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "No (experts only)"
-msgstr "Ù„Ű§ (Ù„Ù„ŰźŰšŰ±Ű§ŰĄ ÙÙ‚Ű·)"
+msgid "CHAP"
+msgstr "CHAP"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Automatic reconfiguration"
-msgstr "ۧŰčۯۧ۩ ŰȘÙ‡ÙŠŰŠŰ© ŰąÙ„ÙŠŰ©"
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp/zeroconf)"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
"\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
"\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
-"ŰȘŰ­Ű°ÙŠŰ±, Ù…ÙˆŰ§ŰŠÙ… Ű§Ù„ŰŽŰšÙƒŰ© (%s) مŰčŰŻÙ‘ Ù…ŰłŰšÙ‚Ű§Ù‹.\n"
"\n"
-"هل ŰȘŰ±ÙŠŰŻ ۧŰčۧۯ۩ Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ© ŰąÙ„ÙŠŰ§Ù‹?\n"
+"ŰŁÙ‡Ù„Ű§Ù‹ ŰšÙƒÙ….\n"
"\n"
-"يمكنك Ű§Ù„Ù‚ÙŠŰ§Ù… ŰšŰ°Ù„Ùƒ ÙŠŰŻÙˆÙŠŰ§Ù‹ لكن ÙŠŰŹŰš ŰŁÙ† ŰȘكون Űčلى Űčلم ŰšÙ…Ű§ ŰȘفŰčل."
+"مŰčŰ§ÙˆÙ…Ù„Ű§ŰȘ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„ŰąÙ„ÙŠ Ù…ÙˆŰŹÙˆŰŻŰ© Űčلى Ű§Ù„Ù‚ŰłÙ… Ű§Ù„ŰŁÙŠŰłŰ±"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface already configured"
-msgstr "ÙˆŰ§ŰŹÙ‡Ű© Ű§Ù„ŰŽŰšÙƒŰ© مŰčŰŻÙ‘Ű© Ù…ŰłŰšÙ‚Ű§!"
+msgid "Puerto Rico"
+msgstr "ŰšÙˆŰ±ŰȘÙˆŰ±ÙŠÙƒÙˆ"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ Ù…ÙˆŰ§ŰŠÙ… Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ű°ÙŠ ŰłÙŠŰȘم ŰšÙ‡ Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ©."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgstr ""
+"Ű­ŰČÙ…Ű© 'ImageMagick' Ű¶Ű±ÙˆŰ±ÙŠŰ© لكي يŰȘم Ű§ÙƒÙ…Ű§Ù„ Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ©.\n"
+"ۧ۶ŰșŰ· \"Ù…ÙˆŰ§ÙÙ‚\" لŰȘŰ«ŰšÙŠŰȘ 'ImageMagick' ŰŁÙˆ \"Ű§Ù„Űșۧۥ\" Ù„Ù„ŰźŰ±ÙˆŰŹ"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "Ű§Ù„Ù„ÙŠŰȘÙˆŰ§Ù†ÙŠŰ© \"Ű”Ù Ű±Ù‚Ù…ÙŠ\" QWERTY"
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
-"%s\n"
"\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
msgstr ""
-"ÙŠÙˆŰŹŰŻ Ù…ÙˆŰ§ŰŠÙ… ŰŽŰšÙƒŰ© ÙˆŰ§Ű­ŰŻ ÙÙ‚Ű· مŰčŰŻÙ‘ Űčلى Ù†ŰžŰ§Ù…Ùƒ:\n"
+"ŰłÙŠŰȘم Ű­Ű°Ù Ù‡Ű°Ù‡ Ű§Ù„Ű­ŰČم لكي ŰȘŰȘم ŰȘŰ±Ù‚ÙŠŰ© Ű§Ù„Ù†ŰžŰ§Ù…: %s\n"
"\n"
-"%s\n"
"\n"
-"Ù†Ű­Ù† Űčلى ÙˆŰŽÙƒ ۧŰčۯۧۯ Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ© ۚۧ۳ŰȘŰźŰŻŰ§Ù… Ù‡Ű°Ű§ Ű§Ù„Ù…ÙˆŰ§ŰŠÙ…."
+"هل ŰȘŰ±ÙŠŰŻ Ű­Ű°Ù Ù‡Ű°Ù‡ Ű§Ù„Ű­ŰČم فŰčÙ„Ű§Ù‹ŰŸ\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface"
-msgstr "ÙˆŰ§ŰŹÙ‡Ű© Ű§Ù„ŰŽŰšÙƒŰ© "
+msgid "Anguilla"
+msgstr "ŰŁÙ†ŰșÙˆÙŠÙ„Ű§"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"لم يŰȘم Ű§ÙƒŰȘŰŽŰ§Ù Ù…ÙˆŰ§ŰŠÙ… Ű§ÙŠŰ«Ű±Ù†ŰȘ Űčلى Ù†ŰžŰ§Ù…Ùƒ. ÙŰ¶Ù„Ű§Ù‹ قم ŰšŰȘŰŽŰșيل ۣۯۧ۩ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰčŰȘۧۯ."
+msgid "NIS Domain"
+msgstr "Ù†Ű·Ű§Ù‚ NIS"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No network adapter on your system!"
-msgstr "Ù„Ű§ Ù…ÙˆŰ§ŰŠÙ… ŰŽŰšÙƒŰ© Űčلى Ù†ŰžŰ§Ù…Ùƒ"
+msgid ""
+"\n"
+"- User Files:\n"
+msgstr ""
+"\n"
+"-Ù…Ù„ÙÙ‘Ű§ŰȘ Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…:\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s"
-msgstr "Ű§Ù„ÙˆŰ§ŰŹÙ‡Ű© %s"
+msgid "Antarctica"
+msgstr "Ű§Ù„Ù‚Ű·Űš Ű§Ù„ŰŹÙ†ÙˆŰšÙŠ"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Ű§Ù„ÙˆŰ§ŰŹÙ‡Ű© %s (ۚۧ۳ŰȘŰźŰŻŰ§Ù… Ű§Ù„ÙˆŰ­ŰŻŰ© %s)"
+msgid "Mount options"
+msgstr "ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Net Device"
-msgstr "ŰŹÙ‡Ű§ŰČ Ű§Ù„ŰŽŰšÙƒŰ©"
+msgid "Jamaica"
+msgstr "ŰŹŰ§Ù…Ű§ÙŠÙƒŰ§"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
-"ÙŰ¶Ù„Ű§Ù‹ ŰŁŰŻŰźÙ„ Ű§ŰłÙ… Ű§Ù„ÙˆŰ§ŰŹÙ‡Ű© Ű§Ù„Ù…ŰȘŰ”Ù„Ű© ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ.\n"
-"\n"
-"ŰŁÙ…Ű«Ù„Ű©:\n"
-"\t\tppp+ Ù„ÙˆŰ”Ù„Ű§ŰȘ Ű§Ù„Ù…ÙˆŰŻÙ… و DSL, \n"
-"\t\teth0, ŰŁÙˆ eth1 Ù„ÙˆŰ”Ù„Ű§ŰȘ Ű§Ù„ÙƒÙŠŰšÙ„, \n"
-"\t\tippp+ Ù„ÙˆŰ”Ù„Ű§ŰȘ ISDN.\n"
+"Űčين Ű§Ù„ŰŁŰŹÙ‡ŰČŰ© Ű§Ù„ŰźŰ§Ù… Ű§Ù„Ù‰ ŰŁŰŹÙ‡ŰČŰ© في ÙˆŰ¶Űč Ű§Ù„ÙƒÙ„ÙŠŰŽÙŠÙ‡ (Ù…Ű«Ù„ ŰȘŰŹŰČۊۧŰȘ\n"
+"Ű§Ù„ŰŁÙ‚Ű±Ű§Ű” Ű§Ù„Ű”Ù„ŰšŰ©), Ù„Ù„Ű§ŰłŰȘŰźŰ§Ù… في ŰȘŰ·ŰšÙŠÙ‚Ű§ŰȘ Ù…Ű«Ù„ Oracle ŰŁÙˆ Ù…ŰŽŰșÙ„Ű§ŰȘ DVD"
-#: ../../standalone/drakgw:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
msgstr ""
-"ŰŁÙ†ŰȘ Űčلى ÙˆŰŽÙƒ ŰȘÙ‡ÙŠŰŠŰ© ŰŹÙ‡Ű§ŰČك Ù„Ù…ŰŽŰ§Ű±ÙƒŰ© Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ.\n"
-"ۚۧ۳ŰȘŰźŰŻŰ§Ù… Ù‡Ű°Ù‡ Ű§Ù„Ù…ÙŠŰČŰ© ŰłÙŠÙ…ÙƒÙ† Ù„Ù„Ű­ÙˆŰ§ŰłÙŠŰš Ű§Ù„ŰŁŰźŰ±Ù‰ في Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ© ŰŁÙ† ŰȘŰłŰȘŰźŰŻÙ… ÙˆŰ”Ù„Ű© "
-"Ű§Ù„ÙƒÙ…ŰšÙŠÙˆŰȘ۱ Ù„Ù‡Ű°Ű§ Ű§Ù„Ű­Ű§ŰłÙˆŰš.\n"
-"\n"
-"ŰȘŰŁÙƒŰŻ من ŰŁÙ†Ùƒ قمŰȘ ŰšŰȘÙ‡ÙŠŰŠŰ© ÙˆŰ”Ù„Ű© Ű§Ù„ŰŽŰšÙƒŰ©/Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ ۚۧ۳ŰȘŰźŰŻŰ§Ù… drakconnect Ù‚ŰšÙ„ "
-"Ű§Ù„Ù…ŰȘۧۚŰčŰ©.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Ù…Ù„Ű­ÙˆŰžŰ©: ŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ Ù…ÙˆŰ§ŰŠÙ… Ù„Ù„ŰŽŰšÙƒŰ© كي ŰȘقوم ۚۄŰčۯۧۯ Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ© (LAN)."
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Ù…ŰŽŰ§Ű±ÙƒŰ© Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ"
+msgid "Please wait, preparing installation..."
+msgstr "Ű§Ù†ŰȘ۱ من ÙŰ¶Ù„Ùƒ, ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰȘŰ­Ű¶ÙŠŰ± للŰȘŰ«ŰšÙŠŰȘ..."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Ù…ŰŽŰ§Ű±ÙƒŰ© Ű„ŰȘŰ”Ű§Ù„ Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ Ù…Ù…ÙƒÙ‘ÙŽÙ†Ű© Ű§Ù„ŰąÙ†."
+msgid "Czech (QWERTZ)"
+msgstr "Ű§Ù„ŰȘŰŽÙŠÙƒÙŠŰ© (QWERTZ)"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Enabling servers..."
-msgstr "ŰŹŰ§Ű±ÙŠ ŰȘمكين Ű§Ù„ŰźÙˆŰ§ŰŻÙ…..."
+msgid "Track network card id (useful for laptops)"
+msgstr "ŰȘŰȘŰšŰč Ù‡ÙˆÙŠŰ© ŰšŰ·Ű§Ù‚Ű© Ű§Ù„ŰŽŰšÙƒŰ© (Ù…ÙÙŠŰŻ Ù„Ù„ŰŹŰ§ŰłŰšŰ§ŰȘ Ű§Ù„ŰŻÙŰȘŰ±ÙŠŰ©)"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "dismiss"
-msgstr "Ű§Ù‡Ù…Ű§Ù„"
+msgid "The port number should be an integer!"
+msgstr "ÙŠŰŹŰš ŰŁÙ† يكون Ű±Ù‚Ù… Ű§Ù„Ù…Ù†ÙŰ° Ű±Ù‚Ù…Ű§Ù‹ Ű”Ű­ÙŠŰ­Ű§Ù‹!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "reconfigure"
-msgstr "Ű„Űčۯۧ۩ Ű§Ù„Ű„Űčۯۧۯ"
+msgid "You must choose an image file first!"
+msgstr "ÙŠŰŹŰš ۧ۟ŰȘÙŠŰ§Ű± ملف Ű”ÙˆŰ±Ű© ŰŁÙˆÙ„Ű§Ù‹!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "enable"
-msgstr "ŰȘمكين"
+msgid "Restore from Hard Disk."
+msgstr "ۧ۳ŰȘŰčŰŻ من Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"ŰȘم ŰȘÙ†Ű”ÙŠŰš Ù…ŰŽŰ§Ű±ÙƒŰ© Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ Ù…ŰłŰšÙ‚Ű§Ù‹.\n"
-"و هي مŰčŰ·Ù„Ű© Ű­Ű§Ù„ÙŠŰ§Ù‹.\n"
-"\n"
-"Ù…Ű§Ű°Ű§ ŰȘŰ±ÙŠŰŻ ŰŁÙ† ŰȘفŰčÙ„ŰŸ"
+msgid "Add to LVM"
+msgstr "Ű§Ű¶Ű§ÙŰ© Ű§Ù„Ù‰ LVM"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Ù…ŰŽŰ§Ű±ÙƒŰ© Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ"
+msgid "DNS server"
+msgstr "ŰźŰ§ŰŻÙ… DNS"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Ù…ŰŽŰ§Ű±ÙƒŰ© ۧŰȘŰ”Ű§Ù„ Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ ŰșÙŠŰ± Ù…Ù…ÙƒÙ‘ÙŽÙ†Ű© Ű§Ù„ŰąÙ†."
+msgid "Trinidad and Tobago"
+msgstr "ŰȘŰ±ÙŠÙ†ÙŠŰ§ŰŻ و ŰȘÙˆŰšŰ§ŰŹÙˆ"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disabling servers..."
-msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰčŰ·ÙŠÙ„ Ű§Ù„ŰźÙˆŰ§ŰŻÙ…..."
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr "LPD و LPRng Ù„Ű§ ŰȘŰŻŰčم ۷ۧۚŰčۧŰȘ IPP.\n"
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "disable"
-msgstr "ŰȘŰčŰ·ÙŠÙ„"
+msgid "simple"
+msgstr "ŰšŰłÙŠŰ·"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"ŰȘم Űčمل Ù…ŰŽŰ§Ű±ÙƒŰ© Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ Ù…ŰłŰšÙ‚Ű§Ù‹.\n"
-"و هي Ù…Ù…ÙƒÙ‘Ù†Ű© Ű­Ű§Ù„ÙŠŰ§Ù‹.\n"
-"\n"
-"Ù…Ű§Ű°Ű§ ŰȘŰ±ÙŠŰŻ ŰŁÙ† ŰȘفŰčÙ„ŰŸ"
+msgid "Clear all"
+msgstr "ŰŁÙ…ŰłŰ­ Ű§Ù„ÙƒÙ„"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Ù…ŰŽŰ§Ű±ÙƒŰ© Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ Ù…Ù…ÙƒÙ†Ű© Ű­Ű§Ù„ÙŠŰ§"
+msgid "No test pages"
+msgstr "Ù„Ű§ Ű”ÙŰ­Ű§ŰȘ ۧ۟ŰȘŰšŰ§Ű±ÙŠŰ©"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
-msgstr "ŰąŰłÙÙˆÙ†, Ù†Ű­Ù† Ù†ŰŻŰčم ۧ۔ۯۧ۱ۧŰȘ Ű§Ù„Ù†ÙˆŰ§Ű© 2.4"
+msgid "Adapter %s: %s"
+msgstr "Ű§Ù„Ù…Ű­ÙˆÙ‘Ù„ %s: %s"
-#: ../../standalone/drakhelp:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
-msgstr ""
-"Ù„Ű§ ÙŠÙˆŰŹŰŻ مŰȘŰ”ÙŰ­ Ù…Ű«ŰšŰȘ Űčلى Ù†ŰžŰ§Ù…Ùƒ, ÙŰ¶Ù„Ű§Ù‹ قم ŰšŰȘŰ«ŰšÙŠŰȘ مŰȘŰ”ÙŰ­ ۧ۰ۧ كنŰȘ ŰȘ۱ŰșŰš في ŰȘŰ”ÙŰ­ Ù†ŰžŰ§Ù… "
-"Ű§Ù„Ù…ŰłŰ§ŰčŰŻŰ©"
+msgid "Falkland Islands (Malvinas)"
+msgstr "ŰŹŰČ۱ ÙÙˆÙƒÙ„Ű§Ù†ŰŻ"
-#: ../../standalone/drakperm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Path"
-msgstr "Ű§Ù„Ù…ŰłŰ§Ű±"
+msgid "Unknown model"
+msgstr "۷۱ۧŰČ ŰșÙŠŰ± مŰčŰ±ÙˆÙ"
-#: ../../standalone/drakperm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "group :"
-msgstr "Ù…ŰŹÙ…ÙˆŰčŰ© :"
+msgid "if set to yes, check files/directories writable by everybody."
+msgstr "if set to yes, check files/directories writable by everybody."
-#: ../../standalone/drakperm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "authentication"
+msgstr "Ű§Ù„ŰȘŰ­Ù‚Ù‚"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "user :"
-msgstr "Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… :"
+msgid "Backup Now"
+msgstr "قم ŰšŰ§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ Ű§Ù„ŰąÙ†"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Path selection"
-msgstr "Ű„ŰźŰȘÙŠŰ§Ű± Ű§Ù„Ù…ŰłŰ§Ű±"
+msgid "/_File"
+msgstr "/_ملف"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "when checked, owner and group won't be changed"
-msgstr "ŰčÙ†ŰŻ Ű§Ù„ŰȘŰŁŰŽÙŠŰ± لن يŰȘم ŰȘŰșÙŠÙŠŰ± Ű§Ù„Ù…Ű§Ù„Ùƒ و Ű§Ù„Ù…ŰŹÙ…ÙˆŰčŰ©"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
+msgstr "ŰŹŰ§Ű±ÙŠ Ű­Ű°Ù Ű§Ù„Ű·Ű§ŰšŰčŰ© من Star Office/OpenOffice.org/GIMP"
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
#, c-format
-msgid "Use group id for execution"
-msgstr "ۧ۳ŰȘŰźŰŻÙ… group id للŰȘÙ†ÙÙŠŰ°"
+msgid ""
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
+msgstr ""
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Use owner id for execution"
-msgstr "ۧ۳ŰȘŰźŰŻÙ… owner id للŰȘÙ†ÙÙŠŰ°"
+msgid "Tamil (ISCII-layout)"
+msgstr "Ű§Ù„ŰȘŰ§Ù…ÙŠÙ„ (ISCII)"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
-"ÙŠÙŰłŰȘŰźŰŻÙ… Ù„Ù„ŰŻÙ„ÙŠÙ„:\n"
-" يمكن ÙÙ‚Ű· Ù„Ù…Ű§Ù„Ùƒ Ù‡Ű°Ű§ Ű§Ù„ŰŻÙ„ÙŠÙ„ ŰŁÙˆ Ű§Ù„Ù…Ù„Ù Ű§Ù„ŰșŰ§Ű€Ù‡"
+msgid "Mayotte"
+msgstr "Ù…Ű§ÙŠÙˆŰȘ"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Set-GID"
-msgstr "Set-GID"
+msgid "Creating auto install floppy..."
+msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù†ŰŽŰ§ŰĄ Ù‚Ű±Ű” Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„ŰąÙ„ÙŠ..."
-#: ../../standalone/drakperm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Set-UID"
-msgstr "Set-UID"
+msgid "Searching for scanners ..."
+msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰšŰ­Ű« Űčن Ű§Ù„Ù…Ű§ŰłŰ­Ű§ŰȘ Ű§Ù„Ű¶ÙˆŰŠÙŠŰ©..."
-#: ../../standalone/drakperm:1
+#: ../../steps.pm:1
#, c-format
-msgid "sticky-bit"
-msgstr "sticky-bit"
+msgid "Partitioning"
+msgstr "ŰȘŰŹŰČŰŠŰ© Ű§Ù„ŰŁÙ‚Ű±Ű§Ű”"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Property"
-msgstr "Ű§Ù„ŰźŰ§Ű”ÙŠŰ©"
+msgid "Russia"
+msgstr "Ű±ÙˆŰłÙŠŰ§"
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Permissions"
-msgstr "Ű§Ù„ŰȘŰ”Ű§Ű±ÙŠŰ­"
+msgid "ethernet card(s) detected"
+msgstr "ŰȘم Ű§ÙƒŰȘŰŽŰ§Ù ŰšŰ·Ű§Ù‚Ű©/ŰšŰ·Ű§Ù‚Ű§ŰȘ Ű§ÙŠŰ«Ű±Ù†ŰȘ"
-#: ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Current user"
-msgstr "Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… Ű§Ù„Ű­Ű§Ù„ÙŠ"
+msgid "Syslog"
+msgstr "syslog"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "browse"
-msgstr "ۧ۳ŰȘŰč۱۶"
+msgid "Can't create catalog!"
+msgstr "ŰȘŰč۰۱ Ű§Ù†ŰŽŰ§ŰĄ Ű§Ù„ÙƒŰȘŰ§Ù„ÙˆŰș!"
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Edit current rule"
-msgstr "Ű­Ű±Ù‘Ű± Ű§Ù„Ù‚Ű§ŰčŰŻŰ© Ű§Ù„Ű­Ű§Ù„ÙŠŰ©"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
+msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "edit"
-msgstr "Ű­Ű±Ù‘Ű±"
+msgid "Not enough free space for auto-allocating"
+msgstr "Ù„Ű§ ŰȘÙˆŰŹŰŻ Ù…ŰłŰ§Ű­Ű© ÙƒŰ§ÙÙŠŰ© للŰȘŰ­ŰŻÙŠŰŻ Ű§Ù„ŰąÙ„ÙŠ"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Delete selected rule"
-msgstr "Ű§Ű­Ű°Ù Ű§Ù„Ù‚Ű§ŰčŰŻŰ© Ű§Ù„Ù…ŰźŰȘۧ۱۩"
+msgid "Set root password"
+msgstr "Űčيّن ÙƒÙ„Ù…Ű© Ù…Ű±ÙˆŰ± Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… Ű§Ù„ŰŹŰ°Ű±"
-#: ../../standalone/drakperm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "delete"
-msgstr "Ű­Ű°Ù"
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
+msgstr ""
+"Ù„Ű§ ÙŠÙˆŰŹŰŻ Ù…ŰŽŰșل مفŰȘÙˆŰ­ Ű§Ù„Ù…Ű”ŰŻŰ± Ù„ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű”ÙˆŰȘ (%s), لكن Ù‡Ù†Ű§Ùƒ Ù…ŰŽŰșل ŰȘŰŹŰ§Ű±ÙŠ في \"%s\"."
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Add a new rule at the end"
-msgstr "ŰŁŰ¶Ù Ù‚Ű§ŰčŰŻŰ© ŰŹŰŻÙŠŰŻŰ© في Ű§Ù„Ù†Ù‡Ű§ÙŠŰ©"
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr "ŰšŰčŰŻ ŰȘŰșÙŠÙŠŰ± Ű­ŰŹÙ… Ű§Ù„ŰȘŰŹŰČŰŠŰ© %s, ÙŰ„Ù† كل Ű§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ Űčلى Ù‡Ű°Ù‡ Ű§Ù„ŰȘŰŹŰČŰŠŰ© ŰłŰȘÙÙ‚ŰŻ"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "add a rule"
-msgstr "Ű§Ű¶Ű§ÙŰ© Ù‚Ű§ŰčŰŻŰ©"
+msgid "Internet connection configuration"
+msgstr "Ű„ŰčۯۧۯۧŰȘ Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Move selected rule down one level"
-msgstr "Ű§Ù†Ù‚Ù„ Ű§Ù„Ù‚Ű§ŰčŰŻŰ© Ű§Ù„Ù…ŰźŰȘۧ۱۩ Ű§Ù„Ù‰ ŰȘŰ­ŰȘ ŰšÙ…ŰłŰȘوى ÙˆŰ§Ű­ŰŻ"
+msgid "Scanning for TV channels"
+msgstr "ŰŹŰ§Ű±ÙŠ ۶ۚ۷ Ù‚Ù†ÙˆŰ§ŰȘ Ű§Ù„ŰȘÙ„ÙŰ§ŰČ"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Down"
-msgstr "ŰȘŰ­ŰȘ"
+msgid "Kernel:"
+msgstr "Ű§Ù„Ù†ÙˆŰ§Ű©:"
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Move selected rule up one level"
-msgstr "Ű§Ù†Ù‚Ù„ Ű§Ù„Ù‚Ű§ŰčŰŻŰ© Ű§Ù„Ù…ŰźŰȘۧ۱۩ Ű§Ù„Ù‰ فوق ŰšÙ…ŰłŰȘوى ÙˆŰ§Ű­ŰŻ"
+msgid "/_About..."
+msgstr "/_Ű­ÙˆÙ„..."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Up"
-msgstr "فوق"
+msgid "Bengali"
+msgstr "Ű§Ù„ŰšÙ†ŰșŰ§Ù„ÙŠŰ©"
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "select perm file to see/edit"
-msgstr "ۧ۟ŰȘ۱ ملف ŰȘŰ”Ű§Ű±ÙŠŰ­ Ù„Ű±Ű€ÙŠŰȘه/ŰȘŰ­Ű±ÙŠŰ±Ù‡"
+msgid "Preference: "
+msgstr "Ű§Ù„ŰȘÙŰ¶ÙŠÙ„: "
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-"ÙŠÙŰłŰȘŰźŰŻÙ… Drakperm Ù„Ű§ŰłŰȘŰč۱ۧ۶ Ű§Ù„Ù…Ù„ÙŰ§ŰȘ Ű§Ù„ŰȘي يŰȘم ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡Ű§ لŰȘŰčŰŻÙŠÙ„ Ű§Ù„Ű”Ù„Ű§Ű­ÙŠŰ§ŰȘ, و "
-"Ű§Ù„Ù…Ù„Ű§Ùƒ و Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…ÙŠÙ† ۚۧ۳ŰȘŰźŰŻŰ§Ù… msec.\n"
-"يمكنك ÙƒŰ°Ù„Ùƒ ŰȘŰ­Ű±ÙŠŰ± Ù‚ÙˆŰ§ŰčŰŻÙƒ Ű§Ù„ŰźŰ§Ű”Ű© Ű§Ù„ŰȘي ŰłŰȘُكŰȘÙŽŰš فوق Ű§Ù„Ù‚ÙˆŰ§Ù‡ŰŻ Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠŰ©."
+msgid "Wizard..."
+msgstr "Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ..."
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "permissions"
-msgstr "Ű§Ù„ŰȘŰ”Ű§Ű±ÙŠŰ­"
+msgid "Services: %d activated for %d registered"
+msgstr "Ű§Ù„ŰźŰŻÙ…Ű§ŰȘ: %d Ù…Ù†ŰŽÙ‘Ű·Ű© لـ %d Ù…ŰłŰŹÙ„Ű©"
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1
#, c-format
-msgid "group"
-msgstr "Ű§Ù„Ù…ŰŹÙ…ÙˆŰčŰ©"
+msgid "Create a bootdisk"
+msgstr "ŰŁÙ†ŰŽŰŠ Ù‚Ű±Ű” Ű„Ù‚Ù„Ű§Űč"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "user"
-msgstr "Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…"
+msgid "Solomon Islands"
+msgstr "ŰŹŰČ۱ ŰłÙ„ÙŠÙ…Ű§Ù†"
-#: ../../standalone/drakperm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "path"
-msgstr "Ű§Ù„Ù…ŰłŰ§Ű±"
+msgid "(module %s)"
+msgstr "(Ű§Ù„ÙˆŰ­ŰŻŰ© %s)"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Ű§Ù„Ù…ÙƒŰ§Ù† Űčلى ملف install.cfg"
+msgid "Workgroup"
+msgstr "Ù…ŰŹÙ…ÙˆŰčŰ© Ű§Ù„Űčمل"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
-"ÙŰ¶Ù„Ű§Ù‹ Ű­ŰŻŰŻ Ù…ÙƒŰ§Ù† ملف auto_install.cfg.\n"
-"\n"
-"ۧŰȘŰ±Ùƒ Ű§Ù„Ű­Ù‚Ù„ ÙŰ§Ű±ŰșŰ§Ù‹ ۧ۰ۧ لم ŰȘكن ŰȘŰ±ÙŠŰŻ ۧŰčۧۯ ÙˆŰ¶Űč Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ű§Ù„ÙŠ.\n"
+msgid "Printer host name or IP"
+msgstr "Ű§ŰłÙ… Ù…ŰłŰȘŰ¶ÙŠÙ Ű§Ù„Ű·Ű§ŰšŰčŰ© ŰŁÙˆ Ű§Ù„Ù€ IP"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr "ŰȘŰč۰۱ Ű§ÙŠŰŹŰ§ŰŻ Ű”ÙˆŰ±Ű© CD ŰŁÙˆ DVD, ÙŰ¶Ù„Ű§Ù‹ Ű§Ù†ŰłŰź ŰšŰ±Ù†Ű§Ù…ŰŹ Ű§Ù„ŰȘŰ«ŰšÙŠÙ† ÙˆÙ…Ù„ÙŰ§ŰȘ rpm"
+msgid "Host Path or Module"
+msgstr "ÙˆŰ­ŰŻŰ© ŰŁÙˆ Ù…ŰłŰ§Ű± Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ"
-#
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No image found"
-msgstr "ŰȘŰč۰۱ Ű§ÙŠŰŹŰ§ŰŻ Ű”ÙˆŰ±Ű©"
+msgid "Name of printer should contain only letters, numbers and the underscore"
+msgstr "Ű§ŰłÙ… Ű§Ù„Ű·Ű§ŰšŰčŰ© ÙŠŰŹŰš ŰŁÙ† ÙŠŰ­ŰȘوي ÙÙ‚Ű· Űčلى Ű­Ű±ÙˆÙ و ŰŁŰ±Ù‚Ű§Ù… و ێۧ۱۷ۧŰȘ ŰȘŰ­ŰȘÙŠŰ©"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Installation image directory"
-msgstr "ŰŻÙ„ÙŠÙ„ Ű”ÙˆŰ±Ű© Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ"
+msgid "Show current interface configuration"
+msgstr "ŰŁŰžÙ‡Ű± ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ÙˆŰ§ŰŹÙ‡Ű© Ű§Ù„Ű­Ű§Ù„ÙŠŰ©"
-#: ../../standalone/drakpxe:1
+#: ../../help.pm:1
#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
-"ÙŰ¶Ù„Ű§Ù‹ ۣ۟ۚ۱ Űčن Ù…ÙƒŰ§Ù† Ű”ÙˆŰ±Ű© Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ.\n"
-"\n"
-"ۧ۰ۧ لم يكن Ù‡Ù†Ű§Ùƒ ŰŻÙ„ÙŠÙ„ Ù…ÙˆŰŹÙˆŰŻ, ÙŰ¶Ù„Ű§Ù‹ Ű§Ù†ŰłŰź Ù…Ű­ŰȘÙˆÙŠŰ§ŰȘ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹ ŰŁÙˆ Ù‚Ű±Ű” DVD.\n"
-"\n"
+msgid "Development"
+msgstr "ŰȘŰ·ÙˆÙŠŰ±"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "The DHCP end ip"
-msgstr "DHCP end ip"
+msgid "Done"
+msgstr "Ű§Ù†ŰȘهى"
-#: ../../standalone/drakpxe:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "The DHCP start ip"
-msgstr "DHCP start ip"
+msgid "Web Server"
+msgstr "ŰźŰ§ŰŻÙ… Ű§Ù„ÙˆÙŠŰš"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
-msgstr ""
-"ŰłÙŠŰłÙ…Ű­ ŰźŰ§ŰŻÙ… DHCP Ù„Ù„ÙƒÙ…ŰšÙŠÙˆŰȘ۱ۧŰȘ Ű§Ù„ŰŁŰźŰ±Ù‰ ŰšŰ§Ù„Ű„Ù‚Ù„Ű§Űč ۚۧ۳ŰȘŰźŰŻŰ§Ù… PXE في Ű­ŰŻÙˆŰŻ Ű§Ù„ŰčÙ†Ű§ÙˆÙŠÙ† "
-"Ű§Ù„Ù…Űč۷ۧ۩.\n"
-"\n"
-"ŰčÙ†ÙˆŰ§Ù† Ű§Ù„ŰŽŰšÙƒŰ© %s ÙŠŰłŰȘŰźŰŻÙ… netmask %s.\n"
-"\n"
+msgid "\tDo not include System Files\n"
+msgstr "\tÙ„Ű§ ŰȘÙŰ¶Ù…Ù† Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ù†ŰžŰ§Ù…\n"
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Ű§Ù„ÙˆŰ§ŰŹÙ‡Ű© %s (Űčلى Ű§Ù„ŰŽŰšÙƒŰ© %s)"
+msgid "Chile"
+msgstr "ŰȘŰŽÙŠÙ„ÙŠ"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr "ۧ۟ŰȘ۱ ÙˆŰ§ŰŹÙ‡Ű© Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„ŰȘي ŰłÙŠŰȘم ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡Ű§ Ù„ŰźŰ§ŰŻÙ… DHCP."
+msgid ""
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
+msgstr ""
+"Ù…ŰŽŰșÙ„Ű§ŰȘ ۷ۧۚŰčŰȘك inkjet Ű§Ù„ŰȘي ŰȘم ŰȘÙˆÙÙŠŰ±Ù‡Ű§ من Lexmark ŰȘŰŻŰčم Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…Ű­Ù„ÙŠŰ© ÙÙ‚Ű·, "
+"Ù„Ű§ ÙŠŰŻŰčم Ű§Ù„Ù…ŰŽŰșل Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Űčلى Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű§ŰȘ Ű§Ù„ŰšŰčÙŠŰŻŰ© ŰŁÙˆ ŰźŰ§ŰŻÙ…Ű§ŰȘ Ű§Ù„Ű·ŰšŰ§ŰčŰ©. ÙŰ¶Ù„Ű§Ù‹ ÙˆŰ”Ù„ "
+"۷ۧۚŰčŰȘك Ű§Ù„Ù‰ Ù…Ù†ÙŰ° Ù…Ű­Ù„ÙŠ ŰŁÙˆ قم ŰšŰȘÙ‡ÙŠŰŠŰȘÙ‡Ű§ Űčلى Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű© Ű§Ù„Ù…Ű±ŰȘۚ۷۩ ŰšÙ‡Ű§."
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Do not use \"scannerdrake\" for this device!"
msgstr ""
-"ŰŁÙ†ŰȘ Űčلى ÙˆŰŽÙƒ ŰȘÙ‡ÙŠŰŠŰ© ŰŹÙ‡Ű§ŰČك لŰȘŰ«ŰšÙŠŰȘ ŰźŰ§ŰŻÙ… PXE ÙƒŰźŰ§ŰŻÙ… DHCP\n"
-"و ŰźŰ§ŰŻÙ… TFTP Ù„ŰšÙ†Ű§ŰĄ ŰźŰ§ŰŻÙ… ŰȘŰ«ŰšÙŠŰȘ.\n"
-"ۚۧ۳ŰȘŰźŰŻŰ§Ù… Ù‡Ű°Ù‡ Ű§Ù„Ù…ÙŠŰČŰ© ŰȘكون Ű§Ù„Ű­ÙˆŰ§ŰłÙŠŰš Ű§Ù„ŰŁŰźŰ±Ù‰ Űčلى Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ© Ù‚Ű§ŰšÙ„Ű© للŰȘŰ«ŰšÙŠŰȘ من "
-"Ù‡Ű°Ű§ Ű§Ù„ŰŹÙ‡Ű§ŰČ.\n"
-"\n"
-"ŰȘŰŁÙƒŰŻ من ŰŁÙ†Ùƒ قمŰȘ ŰšŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰŽŰšÙƒŰ©/Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ ۚۧ۳ŰȘŰźŰŻŰ§Ù… drakconnect Ù‚ŰšÙ„ Ű§Ù„Ù…ŰȘۧۚŰčŰ©.\n"
+"Ű§Ù„ŰŹÙ‡Ű§ŰČ Ű§Ù„Ù…ŰȘŰčŰŻŰŻ Ű§Ù„ÙˆŰžŰ§ŰŠÙ Ű§Ù„ŰźŰ§Ű” ŰšÙƒ ŰȘم ŰȘÙ‡ÙŠŰŠŰȘه ŰąÙ„ÙŠŰ§Ù‹ ليŰȘمكن من Ű§Ù„Ù…ŰłŰ­ Ű§Ù„Ű¶ÙˆŰŠÙŠ. يمكنك "
+"Ű§Ù„ŰąÙ† ۧ۳ŰȘŰźŰŻŰ§Ù… Ű§Ù„Ù…ŰłŰź Ű§Ù„Ű¶ÙˆŰŠÙŠ ۚۧ۳ŰȘŰźŰŻŰ§Ù… \"scanimage\" (\"scanimage -d hp:%s\" "
+"لŰȘŰ­ŰŻÙŠŰŻ Ű§Ù„Ù…Ű§ŰłŰ­ Ű§Ù„Ű¶ÙˆŰŠÙŠ ۧ۰ۧ ÙƒŰ§Ù† Ù„ŰŻÙŠÙƒ ŰŁÙƒŰ«Ű± من ÙˆŰ§Ű­ŰŻ) من ۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű± ŰŁÙˆ ŰšŰ§Ù„ŰšŰ±Ű§Ù…ŰŹ "
+"Ű§Ù„Ű±ŰłÙˆÙ…ÙŠŰ© \"xscanimage\" ŰŁÙˆ \"xsane\". ۧ۰ۧ كنŰȘ ŰȘŰłŰȘŰźŰŻÙ… GIMP, يمكنك ŰŁÙŠŰ¶Ű§Ù‹ Ű§Ù„Ù…ŰłŰ­ "
+"Ű§Ù„Ű¶ÙˆŰŠÙŠ ۚۧ۳ŰȘŰźŰŻŰ§Ù… Ű§Ù„Ù‚ÙˆŰ§ŰŠÙ… \"File\"/\"Acquire\". ŰŽŰșل Ű§Ù„ŰŁÙ…Ű± \"man scanimage\" في "
+"۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű± Ù„Ù„Ű­Ű”ÙˆÙ„ Űčلى مŰČÙŠŰŻ من Ű§Ù„Ù…ŰčÙ„ÙˆÙ…Ű§ŰȘ.\n"
"\n"
-"Ù…Ù„Ű­ÙˆŰžŰ©: ŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ Ù…ÙˆŰ§ŰŠÙ… ŰŽŰšÙƒŰ© Ù…ŰźŰ”Ű” Ù„Ű„Űčۯۧۯ Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ© (LAN)."
+"Ù„Ű§ ŰȘŰłŰȘŰźŰŻÙ… \"scannerdrake\" Ù„Ù‡Ű°Ű§ Ű§Ù„ŰŹÙ‡Ű§ŰČ!"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
#, c-format
-msgid "Installation Server Configuration"
-msgstr "ŰȘÙ‡ÙŠŰŠŰ© ŰźŰ§ŰŻÙ… Ű§Ù„Ű«ŰšÙŠŰȘ"
+msgid "(already added %s)"
+msgstr "(ŰȘم Ű§Ű¶Ű§ÙŰ© %s Ù…ŰłŰšÙ‚Ű§)"
-#: ../../standalone/drakpxe:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "PXE Server Configuration"
-msgstr "ŰȘÙ‡ÙŠŰŠŰ© ŰźŰ§ŰŻÙ… PXE"
+msgid ", using command %s"
+msgstr ", ۚۧ۳ŰȘŰźŰŻŰ§Ù… Ű§Ù„ŰŁÙ…Ű± %s"
-#: ../../standalone/draksec:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please wait, setting security options..."
-msgstr "Ű§Ù†ŰȘ۞۱ من ÙŰ¶Ù„Ùƒ, ŰŹŰ§Ű±ÙŠ ŰȘŰčيين ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„ŰŁÙ…Ù†..."
+msgid "Alt and Shift keys simultaneously"
+msgstr "Ù…ÙŰ§ŰȘÙŠŰ­ Alt و Shift في Ù†ÙŰł Ű§Ù„ÙˆÙ‚ŰȘ"
-#: ../../standalone/draksec:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Please wait, setting security level..."
-msgstr "Ű§Ù†ŰȘ۞۱ من ÙŰ¶Ù„Ùƒ, ŰŹŰ§Ű±ÙŠ ŰȘŰčيين Ù…ŰłŰȘوى Ű§Ù„ŰŁÙ…Ù†.."
+msgid "Flags"
+msgstr "Flags"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Periodic Checks"
-msgstr "ŰȘŰŁÙƒŰŻ ŰŻÙˆŰ±ÙŠ"
+msgid "Add/Del Users"
+msgstr "ŰŁŰ¶Ù/Ű§Ű­Ű°Ù Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…ÙŠÙ†"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "System Options"
-msgstr "ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„Ù†ŰžŰ§Ù…"
+msgid "Host/network IP address missing."
+msgstr "ŰčÙ†ÙˆŰ§Ù† IP Ù„Ù„Ù…ŰłŰȘŰ¶ÙŠÙ/Ű§Ù„ŰŽŰšÙƒŰ© Ù…ÙÙ‚ÙˆŰŻ."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Network Options"
-msgstr "ŰźÙŠŰ§Ű±Ű§ŰȘ ŰŽŰšÙƒŰ©"
+msgid "weekly"
+msgstr "ŰŁŰłŰšÙˆŰčÙŠÙ‘Ű§"
-#: ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Settings"
+msgstr "Ű§Ù„Ű¶ŰšŰ·"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The entered host/network IP is not correct.\n"
+msgstr "ŰčÙ†ÙˆŰ§Ù† IP Ű§Ù„Ù…ŰŻÙŰźÙ„ Ù„Ù„Ù…ŰłŰȘŰ¶ÙŠÙ/Ű§Ù„ŰŽŰšÙƒŰ© ŰșÙŠŰ± Ű”Ű­ÙŠŰ­.\n"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Here is the full list of available countries"
+msgstr "Ù‡Ű§ هي Ù‚Ű§ŰŠÙ…Ű© ÙƒŰ§Ù…Ù„Ű© ŰšÙƒÙ„ Ù„ÙˆŰ­Ű§ŰȘ Ű§Ù„ŰšÙ„Ű§ŰŻ Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű©"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Alternative test page (A4)"
+msgstr "Ű”ÙŰ­Ű© ۧ۟ŰȘŰšŰ§Ű±ÙŠŰ© ŰšŰŻÙŠÙ„Ű© (A4)"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
-"يمكن ŰȘŰčيين Ű§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„ŰȘŰ§Ù„ÙŠŰ© لŰȘŰźŰ”ÙŠŰ”\n"
-"ŰŁÙ…Ù† Ű§Ù„Ù†ŰžŰ§Ù…. ۧ۰ۧ كنŰȘ ŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ مŰČÙŠŰŻ من Ű§Ù„ŰŽŰ±Ű­, Ű§Ù„Ù‚ Ù†ŰžŰ±Ű© Űčلى Ű§Ù„Ù…ŰłŰ§ŰčŰŻŰ©.\n"
+"ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ù„ŰŻÙŠÙƒ قل Ű§Ù„ŰŁÙ‚Ű±Ű§Ű” في Ű§Ù„Ù‚Ű§ŰŠÙ…Ű© ŰŁŰŻÙ†Ű§Ù‡, ۧ۶ŰșŰ· Ù…ÙˆŰ§ÙÙ‚.\n"
+"ۧ۰ۧ لم ŰȘمكن Ù„ŰŻÙŠÙƒ ŰŁÙŠ من Ù‡Ű°Ù‡ Ű§Ù„ŰŁÙ‚Ű±Ű§Ű”, ۧ۶ŰșŰ· Ű§Ù„Űșۧۥ.\n"
+"ۧ۰ۧ ÙƒŰ§Ù†ŰȘ ŰšŰč۶ Ù‡Ű°Ù‡ Ű§Ù„ŰŁÙ‚Ű±Ű§Ű” Ù…ÙÙ‚ÙˆŰŻŰ©, قم ۚۧŰČŰ§Ù„Ű© ۧ۟ŰȘÙŠŰ§Ű±Ù‡Ű§Ű«Ù… ۧ۶ŰșŰ· Ù…ÙˆŰ§ÙÙ‚."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Security Administrator:"
-msgstr "Ù…ŰŻÙŠŰ± Ű§Ù„ŰŁÙ…Ù†:"
+msgid "Wait please"
+msgstr "Ű§Ù„Ű§Ù†ŰȘ۞ۧ۱ من ÙŰ¶Ù„Ùƒ"
-#: ../../standalone/draksec:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Security Alerts:"
-msgstr "ŰȘÙ†ŰšÙŠÙ‡Ű§ŰȘ ŰŁÙ…Ù†ÙŠŰ©:"
+msgid "PAP"
+msgstr "PAP"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Security Level:"
-msgstr "Ù…ŰłŰȘوى Ű§Ù„ŰŁÙ…Ù†:"
+msgid "Backup user files"
+msgstr "Ű§Ù†ŰłŰź Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…"
-#: ../../standalone/draksec:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "(default value: %s)"
-msgstr "(Ű§Ù„Ù‚ÙŠÙ…Ű© Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠŰ©: %s)"
+msgid "New"
+msgstr "ŰŹŰŻÙŠŰŻ"
-#: ../../standalone/draksec:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-" to the Internet as a client.\n"
-"\n"
-"High: There are already some restrictions, and more automatic checks "
-"are run every night.\n"
-"\n"
-"Higher: The security is now high enough to use the system as a server "
-"which can accept\n"
-" connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-" should choose a lower level.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
"\n"
-"Paranoid: This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-" features are at their maximum\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
"\n"
-"Security Administrator:\n"
-" If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-" email)"
-msgstr ""
-"Ù‚ÙŠŰ§ŰłÙŠ: Ù‡Ű°Ű§ هو Ű§Ù„Ù…ŰłŰȘوى Ű§Ù„Ù‚ÙŠŰ§ŰłÙŠ Ű§Ù„Ù…Ù†Ű”ÙˆŰ­ ŰšÙ‡ Ù„ÙƒÙ…ŰšÙŠÙˆŰȘ۱ يقوم ŰšŰ§Ù„Ű„ŰȘŰ”Ű§Ù„\n"
-" ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ كŰčميل.\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
"\n"
-"Ù…Ű±ŰȘفŰč: ŰȘÙˆŰŹŰŻ ŰšŰč۶ Ű§Ù„Ù‚ÙŠÙˆŰŻ Ù…ŰłŰšÙ‚Ű§Ù‹, و ŰšŰč۶ Ű§Ù„Ű„ŰźŰȘۚۧ۱ۧŰȘ يŰȘم ŰȘŰŽŰșÙŠÙ„Ù‡Ű§ ŰąÙ„ÙŠŰ§Ù‹ ŰčÙ†ŰŻ كل "
-"Ù„ÙŠÙ„Ű©.\n"
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
"\n"
-"Ù…Ű±ŰȘقŰč ŰŁÙƒŰ«Ű±: Ű§Ù„Ù…ŰłŰȘوى Ű§Ù„ŰŁÙ…Ù†ÙŠ ŰčŰ§Ù„Ù ŰšŰŽÙƒÙ„ ÙƒŰ§ÙÙ Ù„Ű§ŰłŰȘŰźŰŻŰ§Ù… Ű§Ù„Ù†ŰžŰ§Ù… ÙƒŰźŰ§ŰŻÙ… ÙŠŰłŰȘŰ·ÙŠŰč ŰŁÙ† "
-"ÙŠÙ‚ŰšÙ„\n"
-" Ű§Ù„Ű„ŰȘŰ”Ű§Ù„Ű§ŰȘ من ŰčÙ…Ù„Ű§ŰĄ ÙƒŰ«ÙŠŰ±ÙŠÙ†. ۧ۰ۧ ÙƒŰ§Ù† Ű­Ű§ŰłŰšÙƒ Ù…ŰŹŰ±ŰŻ Űčميل Űčلى "
-"Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ\n"
-"\t ÙÙŠŰŹŰš Űčليك ۧ۟ŰȘÙŠŰ§Ű± Ù…ŰłŰȘوى ŰŁÙ‚Ù„.\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
"\n"
-"Ù…Ű±ŰȘقŰč ŰŹŰŻŰ§Ù‹: Ù‡Ű°Ű§ ÙŠÙ…Ű§Ű«Ù„ Ű§Ù„Ù…ŰłŰȘوى Ű§Ù„ŰłŰ§ŰšÙ‚, لكن Ű§Ù„Ù†ŰžŰ§Ù… في Ù‡Ű°Ù‡ Ű§Ù„Ű­Ű§Ù„ يكون مŰșÙ„Ù‚Ű§Ù‹ و "
-"Ű§Ù„Ù…ŰČŰ§ÙŠŰ§\n"
-" Ű§Ù„ŰŁÙ…Ù†ÙŠŰ© ŰȘكون Űčلى ŰŁÙ‚Ű”Ù‰ Ű­ŰŻ\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
"\n"
-"Ù…ŰŻÙŠŰ± Ű§Ù„ŰŁÙ…Ù†:\n"
-" ۧ۰ۧ ÙƒŰ§Ù† ŰźÙŠŰ§Ű± 'Ű§Ù„ŰȘÙ†ŰšÙŠÙ‡Ű§ŰȘ Ű§Ù„ŰŁÙ…Ù†ÙŠŰ©' Ù…ŰźŰȘŰ§Ű±Ű§Ù‹, ÙŰłÙŠŰȘم Ű§Ű±ŰłŰ§Ù„ ŰȘÙ†ŰšÙŠÙ‡Ű§ŰȘ "
-"ŰŁÙ…Ù†ÙŠŰ© Ű§Ù„Ù‰ Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… (ŰšŰ„ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…\n"
-"\t ŰŁÙˆ Ű§Ù„ŰšŰ±ÙŠŰŻ Ű§Ù„ŰŁÙ„ÙƒŰȘŰ±ÙˆÙ†ÙŠ)"
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
+msgstr ""
+"Ù‡Ű°Ù‡ هي ŰŁÙ‡Ù… ŰźŰ·ÙˆŰ© ŰȘŰȘŰźŰ°Ù‡Ű§ ?من Ù†ŰžŰ§Ù… Ù„ÙŠÙ†ÙƒŰł Ű§Ù„ŰźŰ§Ű”\n"
+"ŰšÙƒ: Űčليك Ű§ŰŻŰźŰ§Ù„ ÙƒÙ„Ù…Ű© Ù…Ű±ÙˆŰ± Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… \"Ű§Ù„ŰŹŰ°Ű±\" (root) و هو\n"
+"Ù…ŰŻÙŠŰ± Ű§Ù„Ù†ŰžŰ§Ù… و Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… Ű§Ù„ÙˆŰ­ÙŠŰŻ Ű§Ù„Ù…ŰźÙˆÙ„ ŰšŰȘŰ­ŰŻÙŠŰ« Ű§Ù„Ù†ŰžŰ§Ù…, Ű§Ű¶Ű§ÙŰ© Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…ÙŠÙ†,\n"
+"ŰȘŰșÙŠÙŠŰ± ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Ù†ŰžŰ§Ù…, Ű§Ù„Űź. ۚۧ۟ŰȘ۔ۧ۱ يمكن Ù„Ù„Ù…ŰłŰȘŰźŰŻÙ… \"Ű§Ù„ŰŹŰ°Ű±\" ŰŁÙ† يفŰčل\n"
+"كل ŰŽŰŠ! Ù„Ű°Ű§ Űčليك ۧ۟ŰȘÙŠŰ§Ű± ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ± Ű”Űčۚ۩\n"
+"Ű§Ù„ŰȘŰźÙ…ÙŠÙ† - ŰłÙŠŰźŰšŰ±Ùƒ DrakX ۧ۰ۧ ÙƒŰ§Ù†ŰȘ ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ± Ű§Ù„ŰȘي ŰȘŰłŰȘŰźŰŻÙ…Ù‡Ű§ ŰłÙ‡Ù„Ű©. ÙƒÙ…Ű§\n"
+"ŰȘŰ±Ù‰, Ù„ŰłŰȘ Ù…ŰŹŰšŰ±Ű§Ù‹ Űčلى Ű§ŰŻŰźŰ§Ù„ ÙƒÙ„Ù…Ű© Ù…Ű±ÙˆŰ±, Ù„ÙƒÙ†Ù†Ű§ Ù†Ù†Ű”Ű­ ۚێۯ۩ ?ن ۭۧŰȘÙ…Ű§Ù„ Ű­ŰŻÙˆŰ«\n"
+"ۣ۟۷ۧۥ مŰč Ù„ÙŠÙ†ÙƒŰł ŰčŰ§ŰŻÙŠ Ù…Ű«Ù„ ŰšŰ§Ù‚ÙŠ ŰŁÙ†ŰžÙ…Ű© Ű§Ù„ŰȘŰŽŰșيل ۧ?ŰźŰ±Ù‰. و ŰšÙ…Ű§ ŰŁÙ† \"Ű§Ù„ŰŹŰ°Ű±\" يمكنه\n"
+"ŰȘŰčŰŻÙŠ كل Ű§Ù„Ű­ŰŻÙˆŰŻ و Ù‚ŰŻ ÙŠŰ­Ű°Ù كل Ű§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ من ŰŻÙˆÙ† Ù‚Ű”ŰŻ, Ù„Ű°Ű§ ÙÙŠŰŹŰš ŰŁÙ† يكون من\n"
+"Ű§Ù„Ű”ŰčŰš ŰŁÙ† ŰȘ۔ۭۚ Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… \"Ű§Ù„ŰŹŰ°Ű±\".\n"
"\n"
+"ÙŠŰŹŰš ŰŁÙ† ŰȘكون ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ± ŰźÙ„ÙŠŰ·Ű§Ù‹ من Ű§Ù„Ű­Ű±ÙˆÙ و ۧ?Ű±Ù‚Ű§Ù… ÙƒÙ…Ű§ ÙŠŰŹŰš ŰŁÙ† ŰȘŰ­ŰȘوي\n"
+"Űčلى 8 Ű­Ű±ÙˆÙ Űčلى ۧ?قل. ? ŰȘكŰȘŰš ÙƒÙ„Ù…Ű© Ù…Ű±ÙˆŰ± \"Ű§Ù„ŰŹŰ°Ű±\" Űčلى ÙˆŰ±Ù‚ -- Ù‡Ű°Ű§ ÙŠŰłÙ‡Ù‘Ù„\n"
+"ۧ۟ŰȘŰ±Ű§Ù‚ Ű§Ù„Ù†ŰžŰ§Ù… ۧ۰ۧ Ű±ŰŁÙ‰ ŰŁŰ­ŰŻ ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ±.\n"
"\n"
+"Ù†Ű”ÙŠŰ­Ű© ŰŁŰźŰ±Ù‰ -- ? ŰȘŰŹŰčل ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ± Ű·ÙˆÙŠÙ„Ű© ŰŹŰŻŰ§Ù‹ ŰŁÙˆ مŰčÙ‚Ù‘ŰŻŰ© ?نك ÙŠŰŹŰš ŰŁÙ† ŰȘكون\n"
+"Ù‚Ű§ŰŻŰ±Ű§Ù‹ Űčلى ŰȘŰ°ÙƒŰ±Ù‡Ű§!\n"
"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
-msgstr ""
+"لن يŰȘم Űč۱۶ ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ± Űčلى Ű§Ù„ŰŽŰ§ŰŽŰ©. لŰȘقليل ÙŰ±Ű”Ű© Ű­ŰŻÙˆŰ«\n"
+"۟۷ۣ ŰŁŰ«Ù†Ű§ŰĄ Ű§Ù„ÙƒŰȘۧۚ۩, ŰłŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ Ű§ŰŻŰźŰ§Ù„ ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ± Ù…Ű±ŰȘين.\n"
+"ۧ۰ۧ ۣ۟۷ۣŰȘ في Ű§Ù„ÙƒŰȘۧۚ۩ في Ű§Ù„Ù…Ű±ŰȘين, ÙŰłÙŠŰŹŰš ۧ۳ŰȘŰźŰŻŰ§Ù… ÙƒÙ„Ù…Ű©\n"
+"Ű§Ù„Ù…Ű±ÙˆŰ± \"Ű§Ù„ŰźŰ§Ű·ŰŠŰ©\" في Ű§Ù„Ù…Ű±Ű© ۧ?ولى Ű§Ù„ŰȘي ŰȘŰŻŰźÙ„ ÙÙŠÙ‡Ű§ Ű§Ù„Ù‰ Ű§Ù„Ù†ŰžŰ§Ù….\n"
"\n"
+"ۧ۰ۧ كنŰȘ ŰȘŰ±ÙŠŰŻ Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ Ù‡Ű°Ű§ Ű§Ù„ÙƒÙ…ŰšÙŠÙˆŰȘ۱ لكي يŰȘم Ű§Ù„ŰȘŰ­ÙƒÙ… ŰšÙƒ Űčن Ű·Ű±ÙŠÙ‚\n"
+"ŰźŰ§ŰŻÙ… Ù…Ű”Ű§ŰŻÙ‚Ű©, ۧ۶ŰșŰ· ŰČ۱ \"%s\".\n"
"\n"
+"ۧ۰ۧ ÙƒŰ§Ù†ŰȘ ŰŽŰšÙƒŰȘك ŰȘŰłŰȘŰźŰŻÙ… LDAP, NIS, ŰŁÙˆ PDC Windows Domain Authentication "
+"Services\n"
+"Űčليك ۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„ŰźÙŠŰ§Ű± Ű§Ù„Ù…Ù†Ű§ŰłŰš كـ\"Ù…Ű”Ű§ŰŻÙ‚Ű©\". ۧ۰ۧ لم ŰȘŰčلم ŰŁÙŠ Ù…Ù†Ù‡Ű§ ŰȘŰ±ÙŠŰŻ\n"
+"ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡, Ű§ŰłŰŁÙ„ Ù…ŰŻÙŠŰ± Ű§Ù„ŰŽŰšÙƒŰ© Ù„ŰŻÙŠÙƒ.\n"
"\n"
-"Ù…Ù„Ű­ÙˆŰžŰ©: ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ù„ŰŻÙŠÙƒ ŰšŰ·Ű§Ù‚Ű© Ű”ÙˆŰȘ ISA PnP, ŰłŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ ۧ۳ŰȘŰźŰŻŰ§Ù… ŰšŰ±Ù†Ű§Ù…ŰŹ "
-"sndconfig. ÙÙ‚Ű· Űčليك كŰȘۧۚ۩ \"sndconfig\" في ۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű±."
+"ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ù„ŰŻÙŠÙƒ Ù…ŰŽÙƒÙ„Ű© في ŰȘŰ°ÙƒŰ± ÙƒÙ„Ù…Ű§ŰȘ Ű§Ù„Ù…Ű±ÙˆŰ±, يمكنك ۧ۟ŰȘÙŠŰ§Ű±\n"
+"\"? ÙƒÙ„Ù…Ű© Ù…Ű±ÙˆŰ±\" ۧ۰ۧ لم يكن Ű§Ù„ÙƒÙ…ŰšÙŠÙˆŰȘ۱ Ű§Ù„ŰźŰ§Ű” ŰšÙƒ مŰȘŰ”Ù„Ű§Ù‹ ۚۧ?نŰȘŰ±Ù†ŰȘ,\n"
+"ŰŁÙˆ ŰŁÙ†Ùƒ ŰȘŰ«Ù‚ في Ű§Ù„Ù„Ű°ÙŠÙ† ÙŠŰŻŰźÙ„ÙˆÙ† Ű§Ù„Ù‰ Ű§Ù„Ù†ŰžŰ§Ù…."
-#: ../../standalone/draksound:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"If you do not know what to choose, stay with the default option."
msgstr ""
-"ŰȘŰč۰۱ Ű§ÙŠŰŹŰ§ŰŻ ŰšŰ·Ű§Ù‚Ű© Ű”ÙˆŰȘ Űčلى ŰŹÙ‡Ű§ŰČك. ÙŰ¶Ù„Ű§Ù‹ ŰȘŰŁÙƒŰŻ من ŰŁÙ† ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű”ÙˆŰȘ Ű§Ù„Ù…ŰŻŰčÙˆÙ…Ű© من "
-"Ù„ÙŠÙ†ÙƒŰł Ù…ÙˆŰ”ÙˆÙ„Ű© ŰšŰŽÙƒÙ„ Ű”Ű­ÙŠŰ­.\n"
-"\n"
-"\n"
-"يمكنك ŰČÙŠŰ§Ű±Ű© Ù‚Ű§ŰčŰŻŰ© ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„ŰčŰȘۧۯ Ű§Ù„Ù…ŰŻŰčوم Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙ†Ű§ Űčلى:\n"
-"\n"
+"ŰčÙ†ŰŻ Ù‡Ű°Ù‡ Ű§Ù„Ù†Ù‚Ű·Ű©, ŰłÙŠŰłÙ…Ű­ لك DrakX ۚۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„Ù…ŰłŰȘوى Ű§Ù„ŰŁÙ…Ù†ÙŠ Ű§Ù„Ű°ÙŠ ŰȘ۱ŰșŰš ŰšÙ‡\n"
+"Ù„Ù‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű©. ŰšŰŻÙŠÙ‡ÙŠŰ§Ù‹, ÙŠŰŹŰš ŰȘŰčيين Ù…ŰłŰȘوى ŰŁÙ…Ù†ÙŠ\n"
+"ŰčŰ§Ù„Ù ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű© ŰȘŰ­ŰȘوي Űčلى مŰčÙ„ÙˆÙ…Ű§ŰȘ Ù‡Ű§Ù…Ű©, ŰŁÙˆ ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű©\n"
+"ŰłŰȘÙŰłŰȘŰźŰŻÙ… Ù„Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ. Ű§Ù† ۧ۳ŰȘŰźŰŻŰ§Ù… Ù…ŰłŰȘوى ŰŁÙ…Ù†ÙŠ ŰčŰ§Ù„Ù ÙŠŰŁŰȘي\n"
+"Űčۧۯ۩ Űčلى ۭ۳ۧۚ ŰłÙ‡ÙˆÙ„Ű© Ű§Ù„Ű„ŰłŰȘŰźŰŻŰ§Ù….\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"ۧ۰ۧ لم ŰȘكن ŰȘŰ±ÙŠŰŻ Ű§Ù„Ű„ŰźŰȘÙŠŰ§Ű±, Ű§Ű­ÙŰž Ű§Ù„Ű§ŰźŰȘÙŠŰ§Ű± Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠ."
-#: ../../standalone/draksound:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No Sound Card detected!"
-msgstr "لم يŰȘم ۧ۟ŰȘÙŠŰ§Ű± ŰšŰ·Ű§Ù‚Ű© Ű”ÙˆŰȘ"
+msgid "Load from floppy"
+msgstr "Ű­Ù…Ù‘Ù„ من Ù‚Ű±Ű” Ù…Ű±Ù†"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "%s BootSplash (%s) preview"
-msgstr "%s BootSplash (%s) مŰčŰ§ÙŠÙ†Ű©"
+msgid "The following printer was auto-detected. "
+msgstr "ŰȘم Ű§ÙƒŰȘŰŽŰ§Ù Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„ŰąŰȘÙŠŰ© ŰąÙ„ÙŠŰ§Ù‹. "
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Generating preview ..."
-msgstr "ŰŹŰ§Ű±ÙŠ ŰȘÙˆÙ„ÙŠŰŻ Ű§Ù„Ù…ŰčŰ§ÙŠÙ†Ű© ..."
+msgid "Boot Floppy"
+msgstr "Ù‚Ű±Ű” Ű§Ù„Ű„Ù‚Ù„Ű§Űč"
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You must choose an image file first!"
-msgstr "ÙŠŰŹŰš ۧ۟ŰȘÙŠŰ§Ű± ملف Ű”ÙˆŰ±Ű© ŰŁÙˆÙ„Ű§Ù‹!"
+msgid "Norwegian"
+msgstr "Ű§Ù„Ù†Ű±ÙˆÙŠŰŹÙŠŰ©"
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "ProgressBar color selection"
-msgstr "Ű„ŰźŰȘÙŠŰ§Ű± لون ŰŽŰ±ÙŠŰ· Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„"
+msgid "Searching for new scanners ..."
+msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰšŰ­Ű« Űčن Ù…Ű§ŰłŰ­Ű§ŰȘ Ű¶ÙˆŰŠÙŠŰ© ŰŹŰŻÙŠŰŻŰ©..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
-msgstr "Ù‡Ű°Ù‡ Ű§Ù„ŰłÙ…Ű© Ù„ÙŠŰł Ù„Ù‡Ű§ bootsplash في %s !"
+msgid "Apache World Wide Web Server"
+msgstr "ŰźŰ§ŰŻÙ… Ű§Ù„ÙˆÙŠŰš Apache"
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "saving Bootsplash theme..."
-msgstr "ŰŹŰ§Ű±ÙŠ Ű­ÙŰž ŰłÙ…Ű© Bootsplash..."
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "stepping of the cpu (sub model (generation) number)"
+msgstr "Stepping of the cpu (sub model (generation) number)"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "choose image file"
-msgstr "Ű„ŰźŰȘ۱ ملف Ű”ÙˆŰ±Ű©"
-
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "choose image"
-msgstr "Ű„ŰźŰȘ۱ ملف Ű”ÙˆŰ±Ű©"
+msgid "select path to restore (instead of /)"
+msgstr "ۧ۟ŰȘ۱ Ù…ŰłŰ§Ű± Ű§Ù„Ű„ŰłŰȘŰčۧۯ۩ (ŰšŰŻÙ„Ű§Ù‹ من / )"
#: ../../standalone/draksplash:1
#, c-format
msgid "Configure bootsplash picture"
msgstr "ŰȘÙ‡ÙŠŰŠŰ© Ű”ÙˆŰ±Ű© Ű§Ù„Ű„Ù‚Ù„Ű§Űč"
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "Make kernel message quiet by default"
-msgstr "ۧۏŰčل Ű±ŰłŰ§ŰŠÙ„ Ű§Ù„Ù†ÙˆŰ§Ű© Ű”Ű§Ù…ŰȘŰ© Ű§ÙŰȘŰ±Ű§Ű¶ÙŠŰ§Ù‹"
-
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Display logo on Console"
-msgstr "ۧŰč۱۶ Ű§Ù„ŰŽŰčۧ۱ في ۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű±"
+msgid "China"
+msgstr "Ű§Ù„Ű”ÙŠÙ†"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose color"
-msgstr "Ű„ŰźŰȘ۱ Ű§Ù„Ù„ÙˆÙ†"
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr " (ŰȘŰŁÙƒŰŻ من ŰŁÙ† كل Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ù…ÙˆŰ”ÙˆÙ„Ű© و ŰȘŰčمل).\n"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Save theme"
-msgstr "Ű§Ű­ÙŰž Ű§Ù„ŰłÙ…Ű©"
+msgid "Georgia"
+msgstr "ŰŹÙˆŰ±ŰŹÙŠŰ§"
-#: ../../standalone/draksplash:1
+#: ../../standalone/printerdrake:1
#, c-format
-msgid "Preview"
-msgstr "مŰčŰ§ÙŠÙ†Ű©"
+msgid "Reading data of installed printers..."
+msgstr "ŰŹŰ§Ű±ÙŠ Ù‚Ű±Ű§ŰĄŰ© ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…Ű«ŰšŰȘŰ©..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "the color of the progress bar"
-msgstr "لون ŰŽŰ±ÙŠŰ· Ű§Ù„ŰȘÙ‚ŰŻÙ…"
+msgid " Erase Now "
+msgstr " Ű§Ù…Ű­Ù Ű§Ù„ŰąÙ† "
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "the height of the progress bar"
-msgstr "ۧ۱ŰȘÙŰ§Űč ŰŽŰ±ÙŠŰ· Ű§Ù„ŰȘÙ‚ŰŻÙ…"
+msgid "server"
+msgstr "ŰźŰ§ŰŻÙ…"
-#: ../../standalone/draksplash:1
+#: ../../install_any.pm:1
#, c-format
-msgid "the width of the progress bar"
-msgstr "Űč۱۶ ŰŽŰ±ÙŠŰ· Ű§Ù„ŰȘÙ‚ŰŻÙ…"
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "ŰŁŰŻŰźÙ„ Ù‚Ű±Ű” Ù…Ű±Ù† Ù…ŰŹÙ‡ŰČ Űčلى Ù†ŰžŰ§Ù… Ù…Ù„ÙŰ§ŰȘ FAT في Ű§Ù„ŰłÙˆŰ§Ù‚Ű© %s"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-"Ű§Ù„Ű„Ű­ŰŻŰ§Ű«ÙŠ Ű§Ù„Ű”Ű§ŰŻÙŠ Ù„Ù„Ű±ÙƒÙ† Ű§Ù„ŰŁÙŠŰłŰ± Ű§Ù„ŰŁŰčلى\n"
-"Ù„ŰŽŰ±ÙŠŰ· Ű§Ù„ŰȘÙ‚ŰŻÙ…"
+msgid "yes means the processor has an arithmetic coprocessor"
+msgstr "نŰčم ŰȘŰčني ŰŁÙ† Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ Ù„ŰŻÙŠÙ‡ مŰčŰ§Ù„ŰŹ Ù…ŰłŰ§ŰčŰŻ للŰčÙ…Ù„ÙŠŰ§ŰȘ Ű§Ù„Ű­ŰłŰ§ŰšÙŠŰ©"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-"Ű§Ù„Ű„Ű­ŰŻŰ§Ű«ÙŠ Ű§Ù„ŰłÙŠÙ†ÙŠ Ù„Ù„Ű±ÙƒÙ† Ű§Ù„ŰŁÙŠŰłŰ± Ű§Ù„ŰŁŰčلى\n"
-"Ù„ŰŽŰ±ÙŠŰ· Ű§Ù„ŰȘÙ‚ŰŻÙ…"
+msgid "Please Wait... Applying the configuration"
+msgstr "ÙŠŰ±ŰŹÙ‰ Ű§Ù„Ű„Ù†ŰȘ۞ۧ۱... ŰŹŰ§Ű±ÙŠ ŰȘŰ·ŰšÙŠÙ‚ Ű§Ù„Ű„ŰčۯۧۯۧŰȘ"
-#: ../../standalone/draksplash:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "text box height"
-msgstr "ۧ۱ŰȘÙŰ§Űč Ű§Ù„Ű”Ù†ŰŻÙˆÙ‚ Ű§Ù„Ù†Ű”ÙŠ"
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Welcome to GRUB the operating system chooser!"
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "text width"
-msgstr "Űč۱۶ Ű§Ù„Ù†Ű”"
+msgid "Grub"
+msgstr "Grub"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"Ű§Ù„Ű„Ű­ŰŻŰ§Ű«ÙŠ Ű§Ù„Ű”Ű§ŰŻÙŠ Ù„Ù„Ű”Ù†ŰŻÙˆÙ‚ Ű§Ù„Ù†Ű”ÙŠ\n"
-"ŰšŰčŰŻŰŻ Ű§Ù„Ű­Ű±ÙˆÙ"
+msgid "SCSI controllers"
+msgstr "مŰȘŰ­ÙƒÙ…Ű§ŰȘ SCSI"
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"Ű§Ù„Ű„Ű­ŰŻŰ§Ű«ÙŠ Ű§Ù„ŰłÙŠÙ†ÙŠ Ù„Ù„Ű”Ù†ŰŻÙˆÙ‚ Ű§Ù„Ù†Ű”ÙŠ\n"
-"ŰšŰčŰŻŰŻ Ű§Ù„Ű­Ű±ÙˆÙ"
+msgid " on LPD server \"%s\", printer \"%s\""
+msgstr "Űčلى ŰźŰ§ŰŻÙ… LPD \"%s\", Ű§Ù„Ű·Ű§ŰšŰčŰ© \"%s\""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
#, c-format
-msgid "Browse"
-msgstr "ۧ۳ŰȘŰč۱۶"
+msgid "Choosing a display manager"
+msgstr "ŰŹŰ§Ű±ÙŠ ۧ۟ŰȘÙŠŰ§Ű± Ù…ŰŻÙŠŰ± Ű§Ù„Űč۱۶"
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Theme name"
-msgstr "Ű§ŰłÙ… Ű§Ù„ŰłÙ…Ű©"
+msgid "Zeroconf Host name"
+msgstr "Ű§ŰłÙ… Ù…ŰłŰȘŰ¶ÙŠÙ Zeroconf"
-#: ../../standalone/draksplash:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "final resolution"
-msgstr "ŰŻÙ‚Ű© Ű§Ù„Űč۱۶ Ű§Ù„Ù†Ù‡Ű§ŰŠÙŠŰ©"
+msgid "IP address should be in format 1.2.3.4"
+msgstr "ŰčÙ†ÙˆŰ§Ù† IP ÙŠŰŹŰš ŰŁÙ† يكون Űčلى Ű§Ù„Ù†ŰłÙ‚ 1.2.3.4"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "first step creation"
-msgstr "Ű§Ù†ŰŽŰ§ŰĄ Ű§Ù„ŰźŰ·ÙˆŰ© Ű§Ù„ŰŁÙˆÙ„Ù‰"
+msgid "Ecuador"
+msgstr "Ű§Ù„Ű„ÙƒÙˆŰ§ŰŻÙˆŰ±"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
-"Ű­ŰČÙ…Ű© 'ImageMagick' Ű¶Ű±ÙˆŰ±ÙŠŰ© لكي يŰȘم Ű§ÙƒÙ…Ű§Ù„ Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ©.\n"
-"ۧ۶ŰșŰ· \"Ù…ÙˆŰ§ÙÙ‚\" لŰȘŰ«ŰšÙŠŰȘ 'ImageMagick' ŰŁÙˆ \"Ű§Ù„Űșۧۥ\" Ù„Ù„ŰźŰ±ÙˆŰŹ"
+msgid "Add an item"
+msgstr "ŰŁŰ¶Ù Ù…Ű§ŰŻŰ©"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-"لم يŰȘم Ű§ÙŠŰŹŰ§ŰŻ ŰšŰ·Ű§Ù‚Ű© ŰȘÙ„ÙŰ§ŰČ Űčلى ŰŹÙ‡Ű§ŰČك. ÙŰ¶Ù„Ű§Ù‹ ŰȘŰŁÙƒŰŻ من ŰŁÙ† ŰšŰ·Ű§Ù‚Ű© Ű§Ù„ÙÙŠŰŻÙŠÙˆ/Ű§Ù„ŰȘÙ„ÙŰ§ŰČ "
-"Ű§Ù„Ù…ŰŻŰčÙˆÙ…Ű© في Ù„ÙŠÙ†ÙƒŰł Ù…ÙˆŰ”ÙˆÙ„Ű© ŰšŰŽÙƒÙ„ Ű”Ű­ÙŠŰ­.\n"
-"\n"
-"\n"
-"يمكنك ŰČÙŠŰ§Ű±Ű© Ù‚Ű§ŰčŰŻŰ© ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„ŰčŰȘۧۯ Ű§Ù„Ù…ŰŻŰčوم Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙ†Ű§ Űčلى:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+msgid "The printers on this machine are available to other computers"
+msgstr "Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Űčلى Ù‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű© مŰȘÙˆÙŰ±Ű© Ù„Ù„ŰŁŰŹÙ‡ŰČŰ© Ű§Ù„ŰŁŰźŰ±Ù‰"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "No TV Card detected!"
-msgstr "لم يŰȘم Ű§ÙŠŰŹŰ§ŰŻ ŰšŰ·Ű§Ù‚Ű© ŰȘÙ„ÙŰ§ŰČ!"
+msgid "I can't find needed image file `%s'."
+msgstr "Ù„Ű§ يمكنني Ű§ÙŠŰŹŰ§ŰŻ ملف Ű§Ù„Ű”ÙˆŰ±Ű© `%s'."
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "Ű§Ù„ŰąÙ† يمكنك ŰȘŰŽŰșيل XawTV (في Ű§Ù„ÙˆŰ§ŰŹÙ‡Ű© Ű§Ù„Ű±ŰłÙˆÙ…ÙŠŰ©!) !\n"
+msgid "No sound card detected. Try \"harddrake\" after installation"
+msgstr "لم يŰȘم Ű§ÙŠŰŹŰ§ŰŻ ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű”ÙˆŰȘ. Ű­Ű§ÙˆÙ„ ŰȘŰŽŰșيل \"harddrake\" ŰšŰčŰŻ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ"
-#: ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Have a nice day!"
-msgstr "نŰȘمنى لك ÙŠÙˆÙ…Ű§Ù‹ ŰłŰčÙŠŰŻŰ§Ù‹!"
+msgid ""
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
+msgstr ""
+"ŰȘم ۧŰč۷ۧۥ Ù…Ù†ÙŰ° ŰșÙŠŰ± Ű”Ű§Ù„Ű­: %s.\n"
+"Ű§Ù„Ù†ŰłÙ‚ Ű§Ù„Ű”Ű­ÙŠŰ­ هو \"port/tcp\" ŰŁÙˆ \"port/udp\", \n"
+"في Ű­ÙŠÙ† يكون Ű§Ù„Ù…Ù†ÙŰ° (port) ŰšÙŠÙ† 1 و 65535."
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "XawTV isn't installed!"
-msgstr "XawTV ŰșÙŠŰ± Ù…Ű«ŰšŰȘ!"
+msgid "Shell"
+msgstr "Ű§Ù„ŰșÙ„Ű§Ù"
-#: ../../standalone/drakxtv:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "ÙƒŰ§Ù† Ù‡Ù†Ű§Ùƒ ۟۷ۣ ŰŁŰ«Ù†Ű§ŰĄ ۶ۚ۷ Ù‚Ù†ÙˆŰ§ŰȘ Ű§Ù„ŰȘÙ„ÙŰ§ŰČ"
+msgid "PCI"
+msgstr "PCI"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Scanning for TV channels"
-msgstr "ŰŹŰ§Ű±ÙŠ ۶ۚ۷ Ù‚Ù†ÙˆŰ§ŰȘ Ű§Ù„ŰȘÙ„ÙŰ§ŰČ"
+msgid "Sao Tome and Principe"
+msgstr "ŰłŰ§Ùˆ ŰȘومي و Ű§Ù„ŰšŰ±ÙŠÙ†ŰłÙŠŰš"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Scanning for TV channels in progress ..."
-msgstr "Ű¶ÙŠŰ· Ù‚Ù†ÙˆŰ§ŰȘ Ű§Ù„ŰȘÙ„ÙŰ§ŰČ ÙÙŠ ŰȘÙ‚ŰŻÙ… ..."
+msgid "Can't login using username %s (bad password?)"
+msgstr "ŰȘŰč۰۱ Ű§Ù„ŰŻŰźÙˆÙ„ ۚۧ۳ŰȘŰźŰŻŰ§Ù… Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… %s (ÙƒÙ„Ù…Ű© Ù…Ű±ÙˆŰ± ŰłÙŠŰŠŰ©ŰŸ)"
-#: ../../standalone/drakxtv:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Area:"
-msgstr "Ű§Ù„Ù…Ù†Ű·Ù‚Ű© :"
+msgid "Azerbaidjani (latin)"
+msgstr "Ű§Ù„ŰŁŰ°Ű±ŰšÙŠŰŹŰ§Ù†ÙŠŰ© (Ù„Ű§ŰȘيني)"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "TV norm:"
-msgstr "TV norm :"
+msgid "Package not installed"
+msgstr "لم يŰȘم ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ű­ŰČÙ…Ű©"
-#: ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"ÙŰ¶Ù„Ű§Ù‹,\n"
-"ۧ۷ۚŰč tv norm Ű§Ù„ŰźŰ§Ű” ŰšÙƒ و ŰšÙ„ŰŻÙƒ"
+msgid "Become a MandrakeExpert"
+msgstr "كن ŰźŰšÙŠŰ±Ű§Ù‹ في MandrakeExpert"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Australian Optus cable TV"
-msgstr "Australian Optus cable TV"
+msgid "American Samoa"
+msgstr "ŰłŰ§Ù…ÙˆŰ§ Ű§Ù„ŰŁÙ…Ű±ÙŠÙƒÙŠŰ©"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Newzealand"
-msgstr "نيوŰČÙŠÙ„Ù†ŰŻŰ§ "
+msgid "Protocol"
+msgstr "Ű§Ù„ŰšŰ±ÙˆŰȘوكول"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "France [SECAM]"
-msgstr "ÙŰ±Ù†ŰłŰ§ [ŰłÙŠÙƒŰ§Ù…]"
+msgid "Copy fonts on your system"
+msgstr "Ű§Ù†ŰłŰź Ű§Ù„ŰźŰ·ÙˆŰ· Ű§Ù„Ù‰ Ù†ŰžŰ§Ù…Ùƒ"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "East Europe"
-msgstr "ŰŁÙˆŰ±ÙˆŰšÙ‘Ű§ Ű§Ù„ŰŽÙ‘Ű±Ù‚ÙŠÙ‘Ű©"
+msgid "Harddrake help"
+msgstr "Ù…ŰłŰ§ŰčŰŻŰ© Harddrake"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "West Europe"
-msgstr "ŰŁÙˆŰ±ÙˆŰšÙ‘Ű§ Ű§Ù„ŰșŰ±ŰšÙŠÙ‘Ű©"
+msgid "Bogomips"
+msgstr "Bogomips"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "China (broadcast)"
-msgstr "Ű§Ù„Ű”ÙŠÙ† (broadcast)"
+msgid "Mandrake Terminal Server Configuration"
+msgstr "ŰȘÙ‡ÙŠŰŠŰ© ŰźŰ§ŰŻÙ… Ű·Ű±ÙÙŠŰ§ŰȘ Mandrake"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Japan (cable)"
-msgstr "Ű§Ù„ÙŠŰ§ŰšŰ§Ù† (cable)"
+msgid ""
+"\n"
+" DrakBackup Report Details\n"
+"\n"
+"\n"
+msgstr ""
+"\n"
+" ŰȘÙŰ§Ű”ÙŠÙ„ ŰȘÙ‚Ű±ÙŠŰ± DrakBackup\n"
+"\n"
+"\n"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Japan (broadcast)"
-msgstr "Ű§Ù„ÙŠŰ§ŰšŰ§Ù† (broadcast)"
+msgid "Restore all backups"
+msgstr "ۧ۳ŰȘŰčŰŻ كل Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠŰ©"
-#: ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Canada (cable)"
-msgstr "ÙƒÙ†ŰŻŰ© (cable)"
+msgid "if set to yes, check open ports."
+msgstr "if set to yes, check open ports."
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "USA (cable-hrc)"
-msgstr "Ű§Ù„ÙˆÙ„Ű§ÙŠŰ§ŰȘ Ű§Ù„Ù…ŰȘÙ‘Ű­ŰŻŰ© Ű§Ù„ŰŁÙ…Ű±ÙŠÙƒÙŠÙ‘Ű© (cable-hrc)"
+msgid "This may take a moment to erase the media."
+msgstr "Ù‚ŰŻ ÙŠŰłŰȘŰșŰ±Ù‚ Ù…ŰłŰ­ Ű§Ù„ÙˆŰłÙŠŰ· ŰšŰč۶ Ű§Ù„ÙˆÙ‚ŰȘ."
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "USA (cable)"
-msgstr "Ű§Ù„ÙˆÙ„Ű§ÙŠŰ§ŰȘ Ű§Ù„Ù…ŰȘÙ‘Ű­ŰŻŰ© Ű§Ù„ŰŁÙ…Ű±ÙŠÙƒÙŠÙ‘Ű© (cable)"
+msgid "You can't select/unselect this package"
+msgstr "Ù„Ű§ يمكنك ۧ۟ŰȘÙŠŰ§Ű±/ۧŰČŰ§Ù„Ű© ۧ۟ŰȘÙŠŰ§Ű± Ù‡Ű°Ù‡ Ű§Ù„Ű­ŰČÙ…Ű©"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "USA (broadcast)"
-msgstr "Ű§Ù„ÙˆÙ„Ű§ÙŠŰ§ŰȘ Ű§Ù„Ù…ŰȘÙ‘Ű­ŰŻŰ© Ű§Ù„ŰŁÙ…Ű±ÙŠÙƒÙŠÙ‘Ű© (broadcast)"
+msgid "Warning"
+msgstr "ŰȘŰ­Ű°ÙŠŰ±"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"XawTV isn't installed!\n"
-"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
+"- Other Files:\n"
msgstr ""
-"XawTV ŰșÙŠŰ± Ù…Ű«ŰšÙ‘ŰȘ!\n"
-"\n"
-"\n"
-"ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ù„ŰŻÙŠÙƒ ŰšŰ·Ű§Ù‚Ű© ŰȘÙ„ÙŰ§ŰČ Ù„ÙƒÙ† لم ÙŠŰłŰȘŰ·Űč DrakX Ű§ÙƒŰȘŰŽŰ§ÙÙ‡Ű§ (Ù„Ű§ ŰȘÙˆŰŹŰŻ ÙˆŰ­ŰŻŰ§ŰȘ bttv "
-"ÙˆÙ„Ű§ saa7134\n"
-"في \"/etc/modules\") ŰŁÙˆ لم ŰȘŰ«ŰšÙ‘ŰȘ xawtv, ÙŰ¶Ù„Ű§Ù‹ قم ŰšŰ„Ű±ŰłŰ§Ù„ نŰȘۧۊۏ\n"
-"Ű§Ù„ŰŁÙ…Ű± \"lspcidrake -v -f\" Ű§Ù„Ù‰ \"install\\@mandrakesoft.com\"\n"
-"مŰč Ű§Ù„ŰčÙ†ÙˆŰ§Ù† \"undetected TV card\".\n"
-"\n"
"\n"
-"يمكنك ŰȘŰ«ŰšÙŠŰȘ XawTV ŰšÙƒŰȘۧۚ۩ Ű§Ù„ŰŁÙ…Ű± \"urpmi xawtv\" ÙƒÙ…ŰłŰȘŰźŰŻÙ… ۏ۰۱ في ۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű±."
+"-Ű§Ù„Ù…Ù„ÙÙ‘Ű§ŰȘ Ű§Ù„ŰŁŰźŰ±Ù‰:\n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "primary"
-msgstr "ŰŁŰłŰ§ŰłÙŠ"
+msgid "Remote host name"
+msgstr "Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ Ű§Ù„ŰšŰčÙŠŰŻ"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "secondary"
-msgstr "Ű«Ű§Ù†ÙˆÙŠ"
+msgid "deactivate now"
+msgstr "قم ۚۄŰČŰ§Ù„Ű© Ű§Ù„ŰȘÙ†ŰŽÙŠŰ· Ű§Ù„ŰąÙ†"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
-msgstr "Ű§Ù†Ù‚Ű± Űčلى ŰŹÙ‡Ű§ŰČ ÙÙŠ Ű§Ù„ŰłÙ„ŰłÙ„Ű© Ű§Ù„ÙŠŰłŰ±Ù‰ لŰč۱۶ مŰčÙ„ÙˆÙ…Ű§ŰȘه Ù‡Ù†Ű§."
+msgid "access to X programs"
+msgstr "Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ ŰšŰ±Ű§Ù…ŰŹ X"
-#: ../../standalone/harddrake2:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Unknown"
-msgstr "ŰșÙŠŰ± مŰčŰ±ÙˆÙ"
+msgid "Computing the size of the Windows partition"
+msgstr "ŰŹŰ§Ű±ÙŠ ۭ۳ۧۚ Ù…ŰłŰ§Ű­Ű© ŰȘŰŹŰČŰŠŰ© Windows"
-# ../../standalone/harddrake2:1, c-format
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "unknown"
-msgstr "ŰșÙŠŰ± مŰčŰ±ÙˆÙ"
+msgid "Italy"
+msgstr "Ű„ÙŠŰ·Ű§Ù„ÙŠŰ§"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Running \"%s\" ..."
-msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰŽŰșيل \"%s\" ..."
+msgid "Name of printer"
+msgstr "Ű§ŰłÙ… Ű§Ù„Ű·Ű§ŰšŰčŰ©"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Run config tool"
-msgstr "ŰŽŰșّل ۣۯۧ۩ Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ©"
+msgid "disable"
+msgstr "ŰȘŰčŰ·ÙŠÙ„"
-#: ../../standalone/harddrake2:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "Configure module"
-msgstr "ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ÙˆŰ­ŰŻŰ©"
+msgid "error unmounting %s: %s"
+msgstr "۟۷ۣ في ۧŰČŰ§Ù„Ű© ŰȘŰ­Ù…ÙŠÙ„ %s: %s"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Information"
-msgstr "مŰčÙ„ÙˆÙ…Ű§ŰȘ"
+msgid "Do it!"
+msgstr "Ű§ÙŰčÙ„Ù‡Ű§!"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Detected hardware"
-msgstr "Ű§Ù„ŰčŰȘۧۯ Ű§Ù„Ù…ÙÙƒŰȘŰŽÙ"
+msgid "Cayman Islands"
+msgstr "ŰŹŰČ۱ ÙƒŰ§ÙŠÙ…Ű§Ù†"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Harddrake2 version "
-msgstr "Harddrake2 Ű§Ù„Ű„Ű”ŰŻŰ§Ű± "
+msgid "%s not responding"
+msgstr "%s Ù„Ű§ ÙŠŰłŰȘŰŹÙŠŰš"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detection in progress"
-msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰȘŰ­Ù‚Ù‚"
+msgid "Select model manually"
+msgstr "ŰȘم ۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„Ù†Ù‘Ù…ÙˆŰ°ŰŹ ÙŠŰŻÙˆÙŠÙ‘Ù‹Ű§"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Author:"
-msgstr "Ű§Ù„Ù…Ű€Ù„Ù:"
+msgid "Format"
+msgstr "ŰȘÙ†ŰłÙŠÙ‚"
-#: ../../standalone/harddrake2:1
+#: ../../network/adsl.pm:1
#, c-format
msgid ""
-"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
msgstr ""
-"Ù‡Ű°Ű§ هو HardDrake, ۣۯۧ۩ Mandrake لŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰčŰȘۧۯ.\n"
-"Ű§Ù„Ű„Ű”ŰŻŰ§Ű±:"
+"Ű§Ù„Ű·Ű±ÙŠÙ‚Ű© Ű§Ù„ŰŁÙƒŰ«Ű± ŰŽÙŠÙˆŰčŰ§Ù‹ Ù„Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšÙ€ adsl هي pppoe.\n"
+"ŰšŰč۶ Ű§Ù„Ű„ŰȘŰ”Ű§Ù„Ű§ŰȘ ŰȘŰłŰȘŰźŰŻÙ… pptp, و Ű§Ù„Ù‚Ù„ÙŠÙ„ ŰȘŰłŰȘŰźŰŻÙ… dhcp.\n"
+"ۧ۰ۧ لم ŰȘكن ŰȘŰčلم, ۧ۟ŰȘ۱ 'ۧ۳ŰȘŰźŰŻÙ… pppoe'"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "About Harddrake"
-msgstr "Ű­ÙˆÙ„ HardDrake"
+msgid "Various"
+msgstr "مŰȘنوŰčŰ©"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "/_About..."
-msgstr "/_Ű­ÙˆÙ„..."
+msgid "Zip"
+msgstr "Zip"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/_Report Bug"
-msgstr "/_ŰȘÙ‚Ű±ÙŠŰ± ۟۷ۣ"
+msgid ""
+"\n"
+"\n"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
+msgstr ""
+"\n"
+"\n"
+"لم يŰȘمكن Printerdrake من Ű§Ù„ŰȘŰčŰ±Ù Űčلى ۷۱ۧŰČ Ű·Ű§ŰšŰčŰȘك %s. ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ Ű§Ù„Ű·Ű±Ű§ŰČ Ű§Ù„Ű”Ű­ÙŠŰ­ "
+"من Ű§Ù„Ù‚Ű§ŰŠÙ…Ű©."
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
msgstr ""
-"ŰčÙ†ŰŻ ۧ۟ŰȘÙŠŰ§Ű±Ùƒ Ù„ŰŹÙ‡Ű§ŰČ, ŰłŰȘŰłŰȘŰ·ÙŠŰč Ű±Ű€ÙŠŰ© مŰčÙ„ÙˆÙ…Ű§ŰȘ ŰȘŰ§ŰŹÙ‡Ű§ŰČ ÙÙŠ Ű§Ù„Ű­Ù‚ÙˆÙ„ Ű§Ù„Ù…ŰčŰ±ÙˆŰ¶Ű© في Ű§Ù„Ű„Ű·Ű§Ű± "
-"Ű§Ù„ŰŁÙŠÙ…Ù† (\"مŰčÙ„ÙˆÙ…Ű§ŰȘ\")"
+"\n"
+"Űčلّم Űčلى Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„ŰȘي ŰȘŰ±ÙŠŰŻ Ù†Ù‚Ù„Ù‡Ű§ Ű«Ù… Ű§Ù†Ù‚Ű± \n"
+"\"Ű§Ù†Ù‚Ù„\"."
-#: ../../standalone/harddrake2:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Select a device !"
-msgstr "ۧ۟ŰȘ۱ ŰŹÙ‡Ű§ŰČŰ§Ù‹!"
+msgid "PDQ"
+msgstr "PDQ"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Albanian"
+msgstr "Ű§Ù„ŰŁÙ„ŰšŰ§Ù†ÙŠŰ©Ù‘"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Lithuania"
+msgstr "ليŰȘÙˆŰ§Ù†ÙŠŰ§"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Compact"
+msgstr "Ù…ŰŻÙ…ŰŹ"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Detected model: %s %s"
+msgstr "ŰȘم Ű§ÙƒŰȘŰŽŰ§Ù Ű§Ù„Ű·Ű±Ű§ŰČ: %s %s"
+
+#: ../../share/advertising/03-software.pl:1
+#, c-format
+msgid "MandrakeSoft has selected the best software for you"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
msgid ""
-"Description of the fields:\n"
+"This is HardDrake, a Mandrake hardware configuration tool.\n"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
"\n"
msgstr ""
-"ÙˆŰ”Ù Ű§Ù„Ű­Ù‚ÙˆÙ„:\n"
-"\n"
+"Ù‡Ű°Ű§ هو HardDrake, ۣۯۧ۩ Mandrake لŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰčŰȘۧۯ.\n"
+"Ű§Ù„Ű„Ű”ŰŻŰ§Ű±:"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Harddrake help"
-msgstr "Ù…ŰłŰ§ŰčŰŻŰ© Harddrake"
+msgid "Local files"
+msgstr "Ù…Ù„ÙŰ§ŰȘ Ù…Ű­Ù„ÙŠŰ©"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "/_Fields description"
-msgstr "/_ÙˆŰ”Ù Ű§Ù„Ű­Ù‚ÙˆÙ„"
+msgid "maybe"
+msgstr "Ű±ŰšÙ…Ű§"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "/_Help"
-msgstr "/_Ù…ŰłŰ§ŰčŰŻŰ©"
+msgid "Panama"
+msgstr "ŰšÙ†Ù…Ű§"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "/_Quit"
-msgstr "/_ŰźŰ±ÙˆŰŹ"
+msgid ""
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
+msgstr ""
+"ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű±ŰłÙˆÙ… Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙƒ ÙŠŰšŰŻÙˆ ŰŁÙ†Ù‡Ű§ ŰȘŰ­ŰȘوي Űčلى Ù…ÙˆŰ”Ù„ للŰȘÙ„ÙŰ§ŰČ.\n"
+"يمكن ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰšŰ·Ű§Ù‚Ű© للŰčمل ۚۧ۳ŰȘŰźŰŻŰ§Ù… Ű§Ù„Ù€ frame-buffer.\n"
+"\n"
+"Ù„Ù‡Ű°Ű§ Ű§Ù„Űș۱۶ ÙŠŰŹŰš Űčليك ŰȘÙˆŰ”ÙŠÙ„ ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű±ŰłÙˆÙ… ŰšŰ§Ù„ŰȘÙ„ÙŰ§ŰČ Ù‚ŰšÙ„ ۚۯۥ ŰȘŰŽŰșيل Ű§Ù„ÙƒÙ…ŰšÙŠÙˆŰȘ۱.\n"
+"Ű«Ù… ۧ۟ŰȘ۱ \"TVout\" من Ù…Ű­Ù…Ù‘Ù„ Ű§Ù„Ű„Ù‚Ù„Ű§Űč\n"
+"\n"
+"هل Ù„ŰŻÙŠÙƒ Ù‡Ű°Ù‡ Ű§Ù„Ù…ÙŠŰČŰ©ŰŸ"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "/ŰȘŰ­Ù‚Ù‚ ŰąÙ„ÙŠ من _ŰłÙˆŰ§Ù‚Ű§ŰȘ Jazz"
+msgid "Monitor"
+msgstr "Ű§Ù„ŰŽŰ§ŰŽŰ©"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Autodetect _modems"
-msgstr "/ŰȘŰ­Ù‚Ù‚ ŰąÙ„ÙŠ من ŰŁ_ŰŹÙ‡ŰČŰ© Ű§Ù„Ù…ÙˆŰŻÙ…"
+msgid ""
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
+"ŰŁÙ†ŰȘ Űčلى ÙˆŰŽÙƒ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Ű·ŰšŰ§ŰčŰ© Űčلى ۭ۳ۧۚ في Windows مŰč ÙƒÙ„Ù…Ű© Ù…Ű±ÙˆŰ±. ۚ۳ۚۚ ۟۷ۣ في "
+"Ù‡ÙŠÙƒÙ„ÙŠŰ© Űčميل Samba, يŰȘم ÙˆŰ¶Űč ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ± ŰšÙ†Ű” ÙˆŰ§Ű¶Ű­ في ۳۷۱ ŰŁÙˆŰ§Ù…Ű± Űčميل Samba "
+"Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… لنقل ÙˆŰžÙŠÙŰ© Ű§Ù„Ű·ŰšŰ§ŰčŰ© Ű§Ù„Ù‰ ŰźŰ§ŰŻÙ… Windows. Ù„Ű°Ű§ ÙŰ„Ù†Ù‡ يمكن لكل Ù…ŰłŰȘŰźŰŻÙ… Űčلى "
+"Ù‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű© ŰŁÙ† يŰč۱۶ ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ± Űčلى Ű§Ù„ŰŽŰ§ŰŽŰ© ۚۧ۳ŰȘŰźŰŻŰ§Ù… ÙƒÙ„Ù…Ű§ŰȘ Ù…Ű±ÙˆŰ± Ù…Ű«Ù„ \"ps "
+"auxwww\".\n"
+"\n"
+"Ù†Ű­Ù† Ù†Ù†Ű”Ű­ ۚۧ۳ŰȘŰčÙ…Ű§Ù„ ÙˆŰ§Ű­ŰŻ من Ű§Ù„ŰšŰŻŰ§ŰŠÙ„ Ű§Ù„ŰȘŰ§Ù„ÙŠŰ© (في كل Ű§Ù„Ű­Ű§?ŰȘ Űčليك Ű§Ù„ŰȘŰŁÙƒŰŻ ŰŁÙ† "
+"Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű§ŰȘ Ű§Ù„Ù…ÙˆŰŹÙˆŰŻŰ© ÙÙ‚Ű· Űčلى Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ© ŰȘŰłŰȘŰ·ÙŠŰč Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ ŰźŰ§ŰŻÙ… Windows, Űčن "
+"Ű·Ű±ÙŠÙ‚ ۧ۳ŰȘŰźŰŻŰ§Ù… ۏۯۧ۱ Ù†Ű§Ű±ÙŠ Ù…Ű«Ù„Ű§Ù‹):\n"
+"\n"
+"ۧ۳ŰȘŰźŰŻÙ… ۭ۳ۧۚ ŰŻÙˆÙ† ÙƒÙ„Ù…Ű© Ù…Ű±ÙˆŰ± Űčلى ŰźŰ§ŰŻÙ… Windows, Ù…Ű«Ù„ ۭ۳ۧۚ \"GUEST\" ŰŁÙˆ ۭ۳ۧۚ ۟ۧ۔ "
+"Ù„Ű§ŰłŰȘŰźŰŻŰ§Ù…Ù‡ Ù„Ù„Ű·ŰšŰ§ŰčŰ©. ? ŰȘقم ۚۄŰČŰ§Ù„Ű© Ű§Ù„Ű­Ù…Ű§ÙŠŰ© Űčن Ű·Ű±ÙŠÙ‚ ÙƒÙ„Ù…Ű§ŰȘ Ű§Ù„Ù…Ű±ÙˆŰ± من Ű­ŰłŰ§ŰšÙƒ Ű§Ù„ŰŽŰźŰ”ÙŠ "
+"ŰŁÙˆ من ۭ۳ۧۚ Ù…ŰŻÙŠŰ± Ű§Ù„Ù†ŰžŰ§Ù….\n"
+"\n"
+"قم ۚۄŰčۯۧۯ ŰźŰ§ŰŻÙ… Windows Ù„ŰŹŰčل Ű§Ù„Ű·Ű§ŰšŰčŰ© مŰȘÙˆÙŰ±Ű© ŰȘŰ­ŰȘ ŰšŰ±ÙˆŰȘوكول LPD. Ű«Ù… قم ۚۄŰčۯۧۯ "
+"Ű§Ù„Ű·ŰšŰ§ŰčŰ© من Ù‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű© مŰč نوŰč Ű§Ù„ÙˆŰ”Ù„Ű© \"%s\" في PrinterDrake.\n"
+"\n"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "/Autodetect _printers"
-msgstr "/ŰȘŰ­Ù‚Ù‚ ŰąÙ„ÙŠ من Ű§Ù„_۷ۧۚŰčۧŰȘ"
+msgid "65 thousand colors (16 bits)"
+msgstr "65 ŰŁÙ„Ù لون (16 ŰšŰȘ)"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/_Options"
-msgstr "/_ŰźÙŠŰ§Ű±Ű§ŰȘ"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
+msgstr ""
+"\n"
+"- Ű§Ű­ÙŰž Űčلى Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš Űčلى Ű§Ù„Ù…ŰłŰ§Ű±:%s\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "the vendor name of the processor"
-msgstr "Ű§ŰłÙ… Ù…Ű”Ù†Ù‘Űč Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ"
+msgid "Size: %d KB\n"
+msgstr "Ű§Ù„Ű­ŰŹÙ…: %d ÙƒÙŠÙ„ÙˆŰšŰ§ÙŠŰȘ\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "the vendor name of the device"
-msgstr "Ű§ŰłÙ… Ù…Ű”Ù†Ù‘Űč Ű§Ù„ŰŹÙ‡Ű§ŰČ"
+msgid "Remove fonts on your system"
+msgstr "Ű§Ű­Ű°Ù Ű§Ù„ŰźŰ·ÙˆŰ· من Ű§Ù„Ù†ŰžŰ§Ù…"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "نوŰč Ű§Ù„Ù€bus Ű§Ù„Ù…Ű±ŰȘۚ۷۩ ŰšÙ‡ Ű§Ù„ÙŰŁŰ±Ű©"
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
+msgstr ""
+"ŰȘŰ­Ű°ÙŠŰ±, Ù…ÙˆŰ§ŰŠÙ… Ű§Ù„ŰŽŰšÙƒŰ© (%s) مŰčŰŻÙ‘ Ù…ŰłŰšÙ‚Ű§Ù‹.\n"
+"\n"
+"هل ŰȘŰ±ÙŠŰŻ ۧŰčۧۯ۩ Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ© ŰąÙ„ÙŠŰ§Ù‹?\n"
+"\n"
+"يمكنك Ű§Ù„Ù‚ÙŠŰ§Ù… ŰšŰ°Ù„Ùƒ ÙŠŰŻÙˆÙŠŰ§Ù‹ لكن ÙŠŰŹŰš ŰŁÙ† ŰȘكون Űčلى Űčلم ŰšÙ…Ű§ ŰȘفŰčل."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
-msgstr "Stepping of the cpu (sub model (generation) number)"
+msgid "Graphical interface at startup"
+msgstr "ÙˆŰ§ŰŹÙ‡Ű© Ű±ŰłÙˆÙ…ÙŠŰ© ŰčÙ†ŰŻ ۚۯۥ Ű§Ù„ŰȘŰŽŰșيل"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Model stepping"
-msgstr "Model stepping"
+msgid "Please enter the directory to save:"
+msgstr "ۧ۟ŰȘ۱ Ű§Ù„ŰŻÙ„ÙŠÙ„ Ű§Ù„Ű°ÙŠ ŰłÙŠŰȘم Ű­ÙŰžÙ‡:"
#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "format of floppies supported by the drive"
+msgstr "Ù†ŰłÙ‚ Ű§Ù„ŰŁÙ‚Ű±Ű§Ű” Ű§Ù„ŰȘي ŰȘÙ‚ŰšÙ„Ù‡Ű§ Ű§Ù„ŰłÙˆŰ§Ù‚Ű©"
+
+#: ../../raid.pm:1
#, c-format
-msgid "the number of the processor"
-msgstr "Ű±Ù‚Ù… Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ"
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "Ű§Ù„ŰȘŰŹŰČۊۧŰȘ Ù„ÙŠŰłŰȘ ÙƒŰ§ÙÙŠŰ© Ù„Ù…ŰłŰȘوى RAID %d\n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Processor ID"
-msgstr "Ù‡ÙˆÙŠŰ© Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ"
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
+msgstr ""
+"ŰȘمŰȘ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„ŰąŰȘÙŠŰ©. Ű§Ù†Ù‚Ű± Ù†Ù‚Ű±Ű© مŰČŰŻÙˆŰŹŰ© Űčلى Ű§Ù„Ű·Ű§ŰšŰčŰ© لŰȘŰșÙŠÙŠŰ± ۧŰčۯۧۯۧŰȘÙ‡Ű§ "
+"Ù„ŰŹŰčÙ„Ù‡Ű§ ۷ۧۚŰčŰ© Ű§ÙŰȘŰ±Ű§Ű¶ÙŠŰ© ŰŁÙˆ Ù„Ű±Ű€ÙŠŰ© مŰčÙ„ÙˆÙ…Ű§ŰȘ Ű­ÙˆÙ„Ù‡Ű§."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "network printer port"
-msgstr "Ù…Ù†ÙŰ° ۷ۧۚŰčŰ© Ű§Ù„ŰŽŰšÙƒŰ©"
+msgid "Connected"
+msgstr "مŰȘÙ‘Ű”Ù„"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "the name of the CPU"
-msgstr "Ű§ŰłÙ… Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ"
+msgid "USB printer \\#%s"
+msgstr "۷ۧۚŰčŰ© USB \\#%s"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Name"
-msgstr "Ű§Ù„Ű§ŰłÙ…"
+msgid "Macedonian"
+msgstr "Ű§Ù„Ù…Ù‚ŰŻÙˆÙ†ÙŠŰ©"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "the number of buttons the mouse has"
-msgstr "ŰčŰŻŰŻ ŰŁŰČ۱ۧ۱ Ű§Ù„ÙŰŁŰ±Ű©"
+msgid "Bridges and system controllers"
+msgstr "مŰȘŰ­ÙƒÙ…Ű§ŰȘ Ű§Ù„Ù†ŰžŰ§Ù…"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Number of buttons"
-msgstr "ŰčŰŻŰŻ Ű§Ù„ŰŁŰČ۱ۧ۱"
+msgid "/File/_Save"
+msgstr "/ملف/_Ű­ÙŰž"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Official vendor name of the cpu"
-msgstr "Ű§Ù„Ű„ŰłÙ… Ű§Ù„Ű±ŰłÙ…ÙŠ Ù„Ù…Ű”Ù†Ù‘Űč Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ"
+msgid "Mali"
+msgstr "Ù…Ű§Ù„ÙŠ"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Model name"
-msgstr "Ű§ŰłÙ… Ű§Ù„Ű·Ű±Ű§ŰČ"
+msgid "No details"
+msgstr "Ù„Ű§ ŰȘÙŰ§Ű”ÙŠÙ„"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
-msgstr "ŰŹÙŠÙ„ Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ (Ù…Ű«Ű§Ù„: 8 Ù„ŰšÙ†ŰȘيوم III, ...)"
+msgid "very nice"
+msgstr "ŰžŰ±ÙŠÙ ŰŹŰŻŰ§Ù‹"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Model"
-msgstr "Ű§Ù„Ű·Ű±Ű§ŰČ"
+msgid "Preview"
+msgstr "مŰčŰ§ÙŠÙ†Ű©"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "hard disk model"
-msgstr "۷۱ۧŰČ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš"
+msgid "Remote Control"
+msgstr "Ű§Ù„ŰȘŰ­ÙƒÙ… Űčن ŰšŰčŰŻ"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "class of hardware device"
-msgstr "ÙŰŠŰ© ŰŹÙ‡Ű§ŰČ Ű§Ù„ŰčŰȘۧۯ"
+msgid "Please select media for backup..."
+msgstr "۱ۏۧۥ ۧ۟ŰȘ۱ ÙˆŰłÙŠŰ· Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ..."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Media class"
-msgstr "ÙŰŠŰ© Ű§Ù„ÙˆŰłÙŠŰ·"
+msgid "XFree86 server: %s\n"
+msgstr "ŰźŰ§ŰŻÙ… XFree86: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Sub generation of the cpu"
-msgstr "Ű§Ù„ŰŹÙŠÙ„ Ű§Ù„Ű«Ű§Ù†ÙˆÙŠ للمŰčŰ§Ù„ŰŹ"
+msgid "Allow Thin Clients"
+msgstr "Ű§ŰłÙ…Ű­ للŰčÙ…Ù„Ű§ŰĄ Ű§Ù„Ù†Ű­Ű§Ù (Thin Clients)"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Level"
-msgstr "Ű§Ù„Ù…ŰłŰȘوى"
+msgid "Georgian (\"Russian\" layout)"
+msgstr "Ű§Ù„ŰŹÙˆŰ±ŰŹÙŠŰ© (Ű§Ù„ŰȘŰ”Ù…ÙŠÙ… Ű§Ù„Ű±ÙˆŰłÙŠ)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Format of floppies supported by the drive"
-msgstr "Ù†ŰłÙ‚ Ű§Ù„ŰŁÙ‚Ű±Ű§Ű” Ű§Ù„ŰȘي ŰȘÙ‚ŰšÙ„Ù‡Ű§ Ű§Ù„ŰłÙˆŰ§Ù‚Ű©"
+msgid "/_Options"
+msgstr "/_ŰźÙŠŰ§Ű±Ű§ŰȘ"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Floppy format"
-msgstr "Ù†ŰłÙ‚ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš"
+msgid "Your printer model"
+msgstr "۷۱ۧŰČ Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙƒ"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
msgstr ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"\n"
+"\n"
+"(ŰȘŰ­Ű°ÙŠŰ±! ŰŁÙ†ŰȘ ŰȘŰłŰȘŰźŰŻÙ… XFS للŰȘŰŹŰČŰŠŰ© Ű§Ù„ŰŹŰ°Ű±ÙŠŰ©,\n"
+"Űčمل Ù‚Ű±Ű” Ù…Ű±Ù† Ù„Ù„Ű„Ù‚Ù„Ű§Űč Ù‚ŰŻ ÙŠÙŰŽÙ„ Űčلى Ű§Ù„ŰŁŰ±ŰŹŰ­,\n"
+"Ù„ŰŁÙ† XFS ÙŠŰ­ŰȘۧۏ Ű§Ù„Ù‰ Ù…ŰŽŰșل ÙƒŰšÙŠŰ± Ű§Ù„Ű­ŰŹÙ…)."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Halt bug"
-msgstr "Halt bug"
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
+msgstr ""
+"\n"
+"- Ű§Ű­Ű°Ù كل Ù…Ù„ÙŰ§ŰȘ tar Ű§Ù„ŰźŰ§Ű”Ű© ŰšŰ§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš ŰšŰčŰŻ كل ŰčÙ…Ù„ÙŠŰ© Ù†ŰłŰź.\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr "مŰčŰ§Ù„ŰŹŰ§ŰȘ pentium Ű§Ù„Ù‚ŰŻÙŠÙ…Ű© ÙƒŰ§Ù†ŰȘ ŰȘŰȘوقف Űčن Ű§Ù„Űčمل ŰčÙ†ŰŻ ۧ۳ŰȘŰźŰŻŰ§Ù… Ű§Ù„ÙƒÙˆŰŻ F00F"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
+msgstr "ŰȘŰč۰۱ Ű§ÙŠŰŹŰ§ŰŻ Ű”ÙˆŰ±Ű© CD ŰŁÙˆ DVD, ÙŰ¶Ù„Ű§Ù‹ Ű§Ù†ŰłŰź ŰšŰ±Ù†Ű§Ù…ŰŹ Ű§Ù„ŰȘŰ«ŰšÙŠÙ† ÙˆÙ…Ù„ÙŰ§ŰȘ rpm"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/04-configuration.pl:1
+#, fuzzy, c-format
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "ŰȘÙ‡ÙŠŰŠŰ© ŰźŰ§ŰŻÙ… Ű·Ű±ÙÙŠŰ§ŰȘ Mandrake"
+
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "F00f bug"
-msgstr "F00f bug"
+msgid "Save"
+msgstr "Ű­ÙŰž"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr "نŰčم ŰȘŰčني ŰŁÙ† Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ Ű§Ù„Ù…ŰłŰ§ŰčŰŻ للŰčÙ…Ù„ÙŠŰ§ŰȘ Ű§Ù„Ű­ŰłŰ§ŰšÙŠŰ© Ù„ŰŻÙŠÙ‡ مŰȘŰŹÙ‡ Ù„Ù„Ű„ŰłŰȘŰ«Ù†Ű§ŰĄŰ§ŰȘ"
+msgid "The %s is unsupported"
+msgstr "Ù‡Ű°Ű§ Ű§Ù„Ù€ %s ŰșÙŠŰ± Ù…ŰŻŰčوم"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr "ۧ۰ۧ ÙƒŰ§Ù† Ű§Ù„Ù€FPU Ù„ŰŻÙŠÙ‡ مŰȘŰŹÙ‡ IRQ"
+msgid "Load the drivers for your usb devices."
+msgstr "Ű­Ù…Ù‘Ù„ Ù…ŰŽŰșÙ„Ű§ŰȘ ŰŁŰŹÙ‡ŰČŰ© USB."
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr "نŰčم ŰȘŰčني ŰŁÙ† Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ Ù„ŰŻÙŠÙ‡ مŰčŰ§Ù„ŰŹ Ù…ŰłŰ§ŰčŰŻ للŰčÙ…Ù„ÙŠŰ§ŰȘ Ű§Ù„Ű­ŰłŰ§ŰšÙŠŰ©"
+msgid "Disk"
+msgstr "Ű§Ù„Ù‚Ű±Ű”"
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Is FPU present"
-msgstr "هل FPU Ù…ÙˆŰŹÙˆŰŻ"
+msgid "Enter a printer device URI"
+msgstr "ŰŁŰŻŰźÙ„ URI Ű§Ù„ŰźŰ§Ű” ŰšŰ§Ù„Ű·Ű§ŰšŰčŰ©"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
msgstr ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
+"Ù†ŰŹŰ§Ű­ MandrakeSoft Ù…ŰšÙ†ÙŠ Űčلى Ù…ŰšŰŻŰŁ Ű­Ű±ÙŠŰ© Ű§Ù„ŰšŰ±Ű§Ù…Ű­. Ù†ŰžŰ§Ù… Ű§Ù„ŰȘŰŽŰșيل Ű§Ù„ŰŹŰŻÙŠŰŻ Ű§Ù„ŰźŰ§Ű” ŰšÙƒ "
+"هو نŰȘÙŠŰŹŰ© للŰȘŰčŰ§ÙˆÙ† و Ű§Ù„Űčمل Ű§Ù„ŰŹŰ§ŰŻ من ŰŹŰČŰĄ من Ù…ŰŹŰȘمŰč Ù„ÙŠÙ†ÙƒŰł Ű­ÙˆÙ„ Ű§Ù„ŰčŰ§Ù„Ù…"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Fdiv bug"
-msgstr "Fdiv bug"
+msgid "Israel"
+msgstr "Ű§ŰłŰ±Ű§ŰŠÙŠÙ„"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr "CPU flags reported by the kernel"
+msgid "French Guiana"
+msgstr "ŰșÙˆÙŠŰ§Ù†Ű§ Ű§Ù„ÙŰ±Ù†ŰłÙŠŰ©"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Flags"
-msgstr "Flags"
+msgid "default:LTR"
+msgstr "default:RTL"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr "ÙˆŰ­ŰŻŰ© Ù†ÙˆŰ§Ű© Ù„ÙŠÙ†ÙƒŰł Ű§Ù„ŰȘي ŰȘŰȘŰčŰ§Ù…Ù„ مŰč Ù‡Ű°Ű§ Ű§Ù„ŰŹÙ‡Ű§ŰČ"
+msgid "add a rule"
+msgstr "Ű§Ű¶Ű§ÙŰ© Ù‚Ű§ŰčŰŻŰ©"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Module"
-msgstr "ÙˆŰ­ŰŻŰ©"
+msgid "A command line must be entered!"
+msgstr "ÙŠŰŹŰš Ű§ŰŻŰźŰ§Ù„ ۳۷۱ ŰŁÙˆŰ§Ù…Ű±"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr "ۧ۳ Ù…Ű§Ù„ŰŹÙ‡Ű§ŰČ Ű§Ù„ŰŻÙŠÙ†Ű§Ù…ÙŠÙƒÙŠ Ű§Ù„ŰŹŰŻÙŠŰŻ Ű§Ù„Ű°ÙŠ يŰȘم ŰȘÙˆÙ„ÙŠŰŻÙ‡ من devfs"
+msgid "Select user manually"
+msgstr "ۧ۟ŰȘŰ±Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… ÙŠŰŻÙˆÙŠÙ‘Ù‹Ű§"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New devfs device"
-msgstr "ŰŹÙ‡Ű§ŰČ devfs ŰŹŰŻÙŠŰŻ"
+msgid "Transfer printer configuration"
+msgstr "نقل Ű„ŰčۯۧۯۧŰȘ Ű§Ù„Ű·Ű§ŰšŰčŰ©"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "old static device name used in dev package"
-msgstr "Ű§ŰłÙ… Ű§Ù„ŰŹÙ‡Ű§ŰČ Ű§Ù„Ù‚ŰŻÙŠÙ… Ű§Ù„ŰłŰ§ÙƒÙ† Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… في Ű­ŰČÙ…Ű© dev"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "هل ŰȘŰ±ÙŠŰŻ ŰȘمكين Ű§Ù„Ű·ŰšŰ§ŰčŰ© Űčلى Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…Ű°ÙƒÙˆŰ±Ű© ŰŁŰčÙ„Ű§Ù‡ŰŸ\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Old device file"
-msgstr "ملف Ű§Ù„ŰŹÙ‡Ű§ŰČ Ű§Ù„Ù‚ŰŻÙŠÙ…"
+msgid ""
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
+msgstr ""
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "This field describes the device"
-msgstr "Ù‡Ű°Ű§ Ű§Ù„Ű­Ù‚Ù„ ÙŠŰ”Ù Ű§Ù„ŰŹÙ‡Ű§ŰČ"
+msgid "%s (Port %s)"
+msgstr "%s (Ű§Ù„Ù…Ù†ÙŰ° %s)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use network connection to backup"
+msgstr "ۧ۳ŰȘŰźŰŻÙ… Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„ŰŽŰšÙƒŰ© Ù„Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
msgstr ""
-"ŰȘ۱ۯۯ Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ ŰšŰ§Ù„Ù…ÙŠŰșŰ§Ù‡ÙŠŰ±ŰȘŰČ (Ű§Ù„Ù…ÙŠŰșŰ§Ù‡ÙŠŰ±ŰȘŰČ ŰȘŰŽÙŠŰ± Ű§Ù„Ù‰ Ű§Ù„ŰčŰŻŰŻ Ű§Ù„ŰȘÙ‚Ű±ÙŠŰšÙŠ من Ű§Ù„ŰȘŰčÙ„ÙŠÙ…Ű§ŰȘ "
-"Ű§Ù„ŰȘي ÙŠŰłŰȘŰ·ÙŠŰč Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ ŰȘÙ†ÙÙŠŰ°Ù‡Ű§ في Ű§Ù„Ű«Ű§Ù†ÙŠŰ© Ű§Ù„ÙˆŰ§Ű­ŰŻŰ©)"
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, c-format
-msgid "Frequency (MHz)"
-msgstr "Ű§Ù„ŰȘ۱ۯۯ (ميŰșŰ§Ù‡ÙŠŰ±ŰȘŰČ)"
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
-msgstr "Ù…ŰłŰȘوى Ű§Ù„Ù…ŰčÙ„ÙˆÙ…Ű§ŰȘ Ű§Ù„ŰȘي يمكن Ű§Ù„Ű­Ű”ÙˆÙ„ ŰčÙ„ÙŠÙ‡Ű§ من ŰȘŰčÙ„ÙŠÙ…Ű§ŰȘ cpuid"
+msgid "Accept user"
+msgstr "ÙˆŰ§ÙÙ‚ Űčلى Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…"
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, c-format
-msgid "Cpuid level"
-msgstr "Ù…ŰłŰȘوى Ù‡ÙˆÙŠŰ© Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ"
+msgid "Server"
+msgstr "ŰźŰ§ŰŻÙ…"
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
-msgstr "ŰčŰ§ŰŠÙ„Ű© Ű§Ù„Ù…ŰčŰ§Ù„Ű­ (Ù…Ű«Ù„Ű§: 6 Ù„ÙŰŠŰ© i686)"
+msgid "Bad choice, try again\n"
+msgstr "ۧ۟ŰȘÙŠŰ§Ű± ŰłÙŠŰŠ, Ű­Ű§ÙˆÙ„ Ù…Ű±Ű© ŰŁŰźŰ±Ù‰\n"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Cpuid family"
-msgstr "ŰčŰ§ŰŠÙ„Ű© Ù‡ÙˆÙŠŰ© Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ"
+msgid "Heard and McDonald Islands"
+msgstr "ŰŹŰČ۱ Ù‡ÙŠŰ±ŰŻ و Ù…Ű§ÙƒŰŻÙˆÙ†Ű§Ù„ŰŻ"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr "ۧ۰ۧ ÙƒŰ§Ù† Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ Ù„ŰŻÙŠÙ‡ Cyrix 6x86 Coma bug"
+msgid "No alternative driver"
+msgstr "Ù„Ű§ Ù…ŰŽŰșل ŰšŰŻÙŠÙ„"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Coma bug"
-msgstr "Coma bug"
+msgid "Toggle to expert mode"
+msgstr "Ű§Ù„Ù†ŰȘÙ‚Ű§Ù„ Ű§Ù„Ù‰ ÙˆŰ¶ŰčÙŠŰ© Ű§Ù„ŰźŰšÙŠŰ±"
-#: ../../standalone/harddrake2:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr "Ű§Ù…ÙƒŰ§Ù†ÙŠŰ§ŰȘ مميŰČŰ© Ù„Ù‡Ű°Ű§ Ű§Ù„Ù…ŰŽŰșل (Ű§Ù…ÙƒŰ§Ù†ÙŠŰ© Ű§Ù„Ù†ŰłŰź ŰŁÙˆ ŰŻŰčم DVD)"
+msgid "(on this machine)"
+msgstr "(Űčلى Ù‡Ű°Ű§ Ű§Ù„ŰŹÙ‡Ű§ŰČ)"
-#: ../../standalone/harddrake2:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Drive capacity"
-msgstr "Ű­ŰŹÙ… Ű§Ù„ŰłÙˆŰ§Ù‚Ű©"
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "ŰčÙ†ÙˆŰ§Ù† Ű§Ù„ŰšÙˆŰ§ŰšŰ§ŰȘ ÙŠŰŹŰš ŰŁÙ† ŰȘكون Űčلى Ű§Ù„Ù†ŰłÙ‚ 1.2.3.4"
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Size of the (second level) cpu cache"
-msgstr "Ű­ŰŹÙ… (Ű§Ù„Ù…ŰłŰȘوى Ű§Ù„Ű«Ű§Ù†ÙŠ)"
+msgid ""
+"\"%s\" based winmodem detected, do you want to install needed software ?"
+msgstr "ŰȘم Ű§ÙŠŰŹŰ§ŰŻ Ű§Ù„ÙˆÙŠÙ†Ù…ÙˆŰŻÙ… \"%s\", هل ŰȘŰ±ÙŠŰŻ ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„ŰšŰ±Ű§Ù…ŰŹ Ű§Ù„Ù…Ű·Ù„ÙˆŰšŰ© ۟"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Cache size"
-msgstr "Ű­ŰŹÙ… Ű§Ù„Ű°Ű§ÙƒŰ±Ű© Ű§Ù„Ù…ŰźŰšŰŠÙŠŰ©"
+msgid "Looking at packages already installed..."
+msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰȘŰčŰ±Ù Űčلى Ű§Ù„Ű­ŰČم Ű§Ù„Ù…Ű«ŰšŰȘŰ© Ù…ŰłŰšÙ‚Ű§Ù‹..."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+msgid "Use Differential Backups"
msgstr ""
-"- ŰŁŰŹÙ‡ŰČŰ© pci: ŰȘŰčŰ·ÙŠ Ù…Ù†ÙŰ° PCI, Ű§Ù„ŰŹÙ‡Ű§ŰČ Ùˆ ÙˆŰžÙŠÙŰ© Ù‡Ű°Ù‡ Ű§Ù„ŰšŰ·Ű§Ù‚Ű©\n"
-"- ŰŁŰŹÙ‡ŰČŰ© eide: Ű§Ù„ŰŹÙ‡Ű§ŰČ Ű„Ù…Ű§ ŰŁÙ† يكون ŰŹÙ‡Ű§ŰČ slave ŰŁÙˆ master\n"
-"- ŰŁŰŹÙ‡ŰČŰ© scsi: scsi bus و Ù‡ÙˆÙŠŰ© ŰŹÙ‡Ű§ŰČ scsi"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Location on the bus"
-msgstr "Ű§Ù„Ù…ÙƒŰ§Ù† Űčلى Ű§Ù„Ù€bus"
+msgid "Driver"
+msgstr "Ű§Ù„Ù…Ű­Ű±Ùƒ"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
msgstr ""
-"- ŰŁŰŹÙ‡ŰČŰ© PCI و USB: Ù‡Ű°Ű§ يŰč۱۶ Ù‚Ű§ŰŠÙ…Ű© Ű§Ù„Ù…Ű”Ù†Űčين و Ű§Ù„ŰŁŰŹÙ‡ŰČŰ© و Ű§Ù„Ù…Ű”Ù†Űčين Ű§Ù„Ű«Ű§Ù†ÙˆÙŠÙŠÙ† و "
-"Ű§Ù„ŰŁŰŹÙ‡ŰČŰ© Ű§Ù„Ű«Ű§Ù†ÙˆÙŠŰ© Ù„Ù‡ÙˆÙŠŰ§ŰȘ PCI/USB"
+"Linuxconf يقوم في ŰšŰč۶ Ű§Ù„ŰŁŰ­ÙŠŰ§Ù† ŰšŰ§Ù„ŰȘ۱ŰȘÙŠŰš لŰčمل ŰšŰč۶ Ű§Ù„ŰŁŰčÙ…Ű§Ù„\n"
+"ŰčÙ†ŰŻ Ű§Ù„Ű„Ù‚Ù„Ű§Űč Ù„Ù„Ù…Ű­Ű§ÙŰžŰ© Űčلى ۧŰčۯۧۯۧŰȘ Ű§Ù„Ù†ŰžŰ§Ù…."
-# U+200F (RTL mark) has been inserted after "Bus" so the display
-# on screen is correctly "datadatadata :Bus xxxxxxxx" (with xxxx arabic),
-# and not "Bus: datadatadata xxxxxxxx"
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Bus identification"
-msgstr "مŰčŰ±Ù Ű§Ù„Ù€ Bus‏"
+msgid "Printer on remote lpd server"
+msgstr "۷ۧۚŰčŰ© Űčلى ŰźŰ§ŰŻÙ… lpd ŰšŰčÙŠŰŻ"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
msgstr ""
-"Ù†ÙˆŰ§Ű© ÙŠÙ†ÙƒŰł ŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ ŰȘŰŽŰșيل Ű­Ù„Ù‚Ű© Ű­ŰłŰ§ŰšÙŠŰ© (Calculation Loop) ŰčÙ†ŰŻ Ű§Ù„Ű„Ù‚Ù„Ű§Űč لŰȘÙ†ŰŽÙŠŰ· "
-"ۣۯۧ۩ ŰčŰŻ Ű§Ù„ÙˆÙ‚ŰȘ. يŰȘم Ű­ÙŰž Ű§Ù„Ù†ŰȘÙŠŰŹŰ© كـbogomips ÙƒŰ·Ű±ÙŠÙ‚Ű© للŰȘŰŁÙƒŰŻ من ۔ۭ۩ Ű§Ù„Ù…ŰčŰ§Ù„ŰŹ."
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Bogomips"
-msgstr "Bogomips"
+"Ù‚ŰšÙ„ ŰȘŰ«ŰšÙŠŰȘ ŰŁÙŠ ŰźŰ·ÙˆŰ· ŰȘŰŁÙƒŰŻ ŰŁÙ†Ù‡ Ù„ŰŻÙŠÙƒ Ű§Ù„Ű­Ù‚ ۚۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡Ù… و ŰȘŰ«ŰšÙŠŰȘهم Űčلى Ű§Ù„Ù†ŰžŰ§Ù….\n"
+"\n"
+"-يمكنك ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„ŰźŰ·ÙˆŰ· ŰšŰ§Ù„Ű·Ű±ÙŠÙ‚Ű© Ű§Ù„ŰčŰ§ŰŻÙŠŰ©. في Ű­Ű§Ù„Ű§ŰȘ Ù†Ű§ŰŻŰ±Ű©, Ù‚ŰŻ ŰȘŰȘ۳ۚۚ Ű§Ù„ŰźŰ·ÙˆŰ· "
+"Ű§Ù„Ù…ŰČÙŠÙŰ© في ŰȘŰčليق ŰźŰ§ŰŻÙ… X."
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "Ù‚Ù†Ű§Ű© EIDE/SCSI"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
+msgstr ""
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second before your\n"
+"default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
-#: ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Channel"
-msgstr "Ű§Ù„Ù‚Ù†Ű§Ű©"
+msgid "No mouse"
+msgstr "Ù„Ű§ ÙŰŁŰ±Ű©"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-msgstr ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+msgid "Germany"
+msgstr "ŰŁÙ„Ù…Ű§Ù†ÙŠŰ§"
-# U+200F (RTL mark) has been inserted after "Bus" so the display
-# on screen is correctly "datadatadata :Bus", and not "Bus: datadatadata"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Bus"
-msgstr "Bus‏"
+msgid "Austria"
+msgstr "Ű§Ù„Ù†Ù…ŰłŰ§"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "Ù‚Ű§ŰŠÙ…Ű© Ű§Ù„Ù…ŰŽŰșÙ„Ű§ŰȘ Ű§Ù„ŰšŰŻÙŠÙ„Ű© Ù„ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű”ÙˆŰȘ"
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr "ŰŽŰșّل \"sndconfig\" ŰšŰčŰŻ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ لŰȘÙ‡ÙŠŰŠŰ© ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű”ÙˆŰȘ Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙƒ"
-#: ../../standalone/harddrake2:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Alternative drivers"
-msgstr "Ù…ŰŽŰșÙ„Ű§ŰȘ ŰšŰŻÙŠÙ„Ű©"
+msgid "Collapse Tree"
+msgstr "Collapse Tree"
-#: ../../standalone/keyboarddrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "هل ŰȘŰ±ÙŠŰŻ ŰŁÙ† يقوم ŰČ۱ BackSpace ŰšŰčمل ÙˆŰžÙŠÙŰ© ŰČ۱ Delete في ۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű±ŰŸ"
+msgid "Auto Install Configurator"
+msgstr "ۣۯۧ۩ ۧŰčۯۧۯ Ű§Ù„Ù…Ű«ŰšÙ‘ŰȘ Ű§Ù„ŰąÙ„ÙŠ"
-#: ../../standalone/keyboarddrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "من ÙŰ¶Ù„Ùƒ ۧ۟ŰȘ۱ ŰȘŰ”Ù…ÙŠÙ… Ù„ÙˆŰ­Ű© Ù…ÙŰ§ŰȘÙŠŰ­Ùƒ"
+msgid "Configure networking"
+msgstr "ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰŽŰšÙƒŰ©"
-#: ../../standalone/livedrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "لم ŰŁŰȘمكن من ۚۯۥ Ű§Ù„ŰȘŰ±Ù‚ÙŠŰ© Ű§Ù„Ű­ÙŠŰ© !!!\n"
+msgid "Where do you want to install the bootloader?"
+msgstr "ŰŁÙŠÙ† ŰȘŰ±ÙŠŰŻ ŰȘŰ«ŰšÙŠŰȘ Ù…Ű­Ù…Ù‘Ù„ Ű§Ù„Ű„Ù‚Ù„Ű§Űč۟"
-#: ../../standalone/livedrake:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
msgstr ""
-"ÙŰ¶Ù„Ű§ ŰŁŰŻŰźÙ„ Ù‚Ű±Ű” Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ في ŰłÙˆŰ§Ù‚ŰȘك و ۧ۶ŰșŰ· Ù…ÙˆŰ§ÙÙ‚ ŰčÙ†ŰŻÙ…Ű§ ŰȘنŰȘهي.\n"
-"ۄ۰ۧ لم يكن Ù‚Ű±Ű” Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ Ù„ŰŻÙŠÙƒ ۧ۶ŰșŰ· Ű§Ù„Űșۧۥ Ù„Ù„Ű„Ù…ŰȘÙ†Ű§Űč Űčن Ű§Ù„ŰȘŰ­ŰŻÙŠŰ« Ű§Ù„Ű­ÙŠ."
+"ۧ۟ŰȘÙŠŰ§Ű±Ùƒ للŰșŰ© Ű§Ù„Ù…ÙŰ¶Ù„Ű© ŰłÙŠŰ€Ű«Ű± Űčلى لŰșŰ© ÙˆŰ«Ű§ŰŠÙ‚ Ű§Ù„Ù…ŰłŰ§ŰčŰŻŰ©\n"
+"و ŰšŰ±Ù†Ű§Ù…ŰŹ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ و Ű§Ù„Ù†ŰžŰ§Ù… ŰšŰŽÙƒÙ„ ŰčŰ§Ù…. ŰŁÙˆ?ً ۧ۟ŰȘ۱ Ű§Ù„Ù…Ù†Ű·Ù‚Ű© Ű§Ù„ŰȘي\n"
+"ŰȘŰȘÙˆŰ§ŰŹŰŻ ÙÙŠÙ‡Ű§, Ű«Ù… Ű§Ù„Ù„ŰșŰ© Ű§Ù„ŰȘي ŰȘŰȘŰ­ŰŻŰ« ŰšÙ‡Ű§.\n"
+"\n"
+"۶ŰșŰ· ŰČ۱ \"مŰȘÙ‚ŰŻÙ…\" ŰłÙŠŰłÙ…Ű­ لك ۚۧ۟ŰȘÙŠŰ§Ű± لŰșۧŰȘ\n"
+"ŰŁŰźŰ±Ù‰ ليŰȘم ŰȘŰ«ŰšÙŠŰȘÙ‡Ű§ Űčلى Ù…Ű­Ű·Ű© Ű§Ù„Űčمل Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙƒ,و من Ű«Ù…\n"
+"ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ù…Ù„ÙŰ§ŰȘ Ű§Ù„ŰźŰ§Ű”Ű© ŰšŰ§Ù„Ù„ŰșۧŰȘ Ù„ÙˆŰ«Ű§ŰŠÙ‚ Ű§Ù„Ù…ŰłŰ§ŰčŰŻŰ© و Ű§Ù„ŰȘŰ·ŰšÙŠÙ‚Ű§ŰȘ, Ù…Ű«Ù„Ű§Ù‹\n"
+"ۧ۰ۧ كنŰȘ ŰłŰȘŰłŰȘŰ¶ÙŠÙ Ù…ŰłŰȘŰźŰŻÙ…ÙŠÙ† من ŰŁŰłŰšŰ§Ù†ÙŠŰ§ Űčلى Ù…Ű§ÙƒÙŠÙ†ŰȘك, ۧ۟ŰȘ۱ ۧ?Ù†ŰŹÙ„ÙŠŰČÙŠŰ©\n"
+"كلŰșŰ© Ű§ÙŰȘŰ±Ű§Ű¶ÙŠŰ© في Ű§Ù„Ù†Ù…Ű· Ű§Ù„ŰŽŰŹŰ±ÙŠ و \"ۧ?ŰłŰšŰ§Ù†ÙŠŰ©\" في Ű§Ù„Ù‚ŰłÙ…\n"
+"Ű§Ù„Ù…ŰȘÙ‚ŰŻÙ….\n"
+"?Ű­Űž ŰŁÙ†Ùƒ Ù„ŰłŰȘ Ù…Ù‚ÙŠŰŻŰ§Ù‹ ۚۧ۟ŰȘÙŠŰ§Ű± لŰșŰ© ÙˆŰ§Ű­ŰŻŰ© Ű§Ű¶Ű§ÙÙŠŰ©. Ű­Ű§Ù„\n"
+"ۧ۟ŰȘÙŠŰ§Ű±Ùƒ Ù„Ù„Ű„ŰčۯۧۯۧŰȘ Ű§Ù„Ù…Ű­Ù„ÙŠŰ©, ۧ۶ŰșŰ· ŰČ۱ \"Ű§Ù„ŰȘŰ§Ù„ÙŠ ->\"\n"
+"للمŰȘۧۚŰčŰ©.\n"
+"\n"
+"للŰȘŰșÙŠÙŠŰ± ŰšÙŠÙ† Ű§Ù„Ù„ŰșۧŰȘ Ű§Ù„Ù…ŰȘŰčŰŻŰŻŰ© Ű§Ù„Ù…Ű«ŰšŰȘŰ© Űčلى Ű§Ù„Ù†ŰžŰ§Ù…, يمكنك\n"
+"ŰȘŰŽŰșيل ۧ?Ù…Ű± \"/usr/sbin/localedrake\"ÙƒÙ…ŰłŰȘŰźŰŻÙ… ۏ۰۱ لŰȘŰșÙŠÙŠŰ±\n"
+"Ű§Ù„Ù„ŰșŰ© Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…Ű© Űčن Ű·Ű±ÙŠÙ‚ Ű§Ù„Ù†ŰžŰ§Ù… ككل. ŰȘŰŽŰșيل ۧ?Ù…Ű± ÙƒÙ…ŰłŰȘŰźŰŻÙ… ŰčŰ§ŰŻÙŠ\n"
+"ŰłÙŠŰșÙŠŰ± ÙÙ‚Ű· ۧŰčۯۧۯۧŰȘ Ű§Ù„Ù„ŰșŰ© Ù„Ù‡Ű°Ű§ Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… ÙÙ‚Ű·."
-#: ../../standalone/livedrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Change Cd-Rom"
-msgstr "ŰșÙŠÙ‘Ű± Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹ"
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr "Ű§Ù„Ù€ %s ŰșÙŠŰ± Ù…ŰŻŰčوم من Ù‡Ű°Ű§ Ű§Ù„Ű„Ű”ŰŻŰ§Ű± من Mandrake Linux."
-#: ../../standalone/localedrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr "ŰȘم Űčمل Ű§Ù„ŰȘŰșÙŠÙŠŰ±, و لكن ليŰȘم ŰȘفŰčيله ÙŠŰŹŰš Űčليك Ű§Ù„ŰźŰ±ÙˆŰŹ"
+msgid "DHCP client"
+msgstr "DHCP Ű§Ù„Űčميل "
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Save as.."
-msgstr "Ű­ÙŰž ŰšŰ„ŰłÙ….."
+msgid "Restoring from file %s failed: %s"
+msgstr "ÙŰŽÙ„ŰȘ Ű§Ù„Ű„ŰłŰȘŰčۧۯ۩ من Ű§Ù„Ù…Ù„Ù %s: %s"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please enter your email address below "
-msgstr "ÙŰ¶Ù„Ű§Ù‹ ŰŁŰŻŰźÙ„ ŰčÙ†ÙˆŰ§Ù† ŰšŰ±ÙŠŰŻÙƒ Ű§Ù„ŰŁÙ„ÙƒŰȘŰ±ÙˆÙ†ÙŠ ŰŁŰŻÙ†Ű§Ù‡ "
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech Mouse (serial, old C7 type)"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "alert configuration"
-msgstr "Ű„ŰčۯۧۯۧŰȘ Ű§Ù„ŰȘÙ†ŰšÙŠÙ‡"
+msgid "Are you sure that you want to set up printing on this machine?\n"
+msgstr "هل ŰŁÙ†ŰȘ مŰȘŰŁÙƒŰŻ ŰŁÙ†Ùƒ ŰȘŰ±ÙŠŰŻ ŰȘÙ†Ű”ÙŠŰš Ű§Ù„Ű·ŰšŰ§ŰčŰ© Űčلى Ù‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű©ŰŸ\n"
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "ŰłÙˆÙ ŰȘŰłŰȘلم ŰȘÙ†ŰšÙŠÙ‡Ű§ ۧ۰ۧ ÙƒŰ§Ù† Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„ ŰŁŰčلى من Ù‡Ű°Ù‡ Ű§Ù„Ù‚ÙŠÙ…Ű©"
+msgid "New devfs device"
+msgstr "ŰŹÙ‡Ű§ŰČ devfs ŰŹŰŻÙŠŰŻ"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "load setting"
-msgstr "Ű­Ù…Ù„ Ű§Ù„Ű„ŰčۯۧۯۧŰȘ"
+msgid "ERROR: Cannot spawn %s."
+msgstr "ERROR: Cannot spawn %s."
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr "ŰłÙˆÙ ŰȘŰłŰȘلم ŰȘÙ†ŰšÙŠÙ‡Ű§Ù‹ ۄ۰ۧ ÙƒŰ§Ù†ŰȘ ŰŁŰ­ŰŻ Ű§Ù„ŰźŰŻÙ…Ű§ŰȘ Ű§Ù„Ù…ŰźŰȘۧ۱۩ ŰșÙŠŰ± ŰčŰ§Ù…Ù„Ű©."
+msgid "Boot Style Configuration"
+msgstr "ۧŰčۯۧۯ ŰŁŰłÙ„ÙˆŰš Ű§Ù„Ű„Ù‚Ù„Ű§Űč"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Automatic time synchronization"
+msgstr "ŰȘŰČŰ§Ù…Ù† وقŰȘ ŰąÙ„ÙŠ (ۚۧ۳ŰȘŰźŰŻŰ§Ù… NTP)"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "service setting"
-msgstr "Ű„ŰčۯۧۯۧŰȘ Ű§Ù„ŰźŰŻÙ…Ű§ŰȘ"
+msgid "Backup files not found at %s."
+msgstr "Ù…Ù„ÙŰ§ŰȘ Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ ŰșÙŠŰ± Ù…ÙˆŰŹÙˆŰŻŰ© Űčلى %s"
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Xinetd Service"
-msgstr "ŰźŰŻÙ…Ű§ŰȘ Xinetd"
+msgid "Thank you for choosing Mandrake Linux 9.1"
+msgstr "ŰŽÙƒŰ±Ű§Ù‹ Ù„Ű§ŰźŰȘÙŠŰ§Ű±Ùƒ Mandrake Linux 9.1"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Webmin Service"
-msgstr "ŰźŰŻÙ…Ű§ŰȘ Webmin"
+msgid "Armenian (phonetic)"
+msgstr "Ű§Ù„ŰŁŰ±Ù…ÙŠÙ†ÙŠŰ© (Ű”ÙˆŰȘي)"
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "SSH Server"
-msgstr "ŰźŰ§ŰŻÙ… SSH"
+msgid "Card model:"
+msgstr "نوŰč Ű§Ù„ŰšŰ·Ű§Ù‚Ű©"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Samba Server"
-msgstr "ŰźŰ§ŰŻÙ… Samba"
+msgid "Thin Client"
+msgstr "Űčميل Ù†Ű­ÙŠÙ (Thin Client)"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Postfix Mail Server"
-msgstr "ŰźŰ§ŰŻÙ… Ű§Ù„ŰšŰ±ÙŠŰŻ Postfix"
+msgid "Start Server"
+msgstr "ۧۚۯۣ Ű§Ù„ŰźŰ§ŰŻÙ…"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ftp Server"
-msgstr "Ű§Ù„ŰźŰ§ŰŻÙ… FTP"
+msgid "Turkmenistan"
+msgstr "ŰȘŰ±ÙƒÙ…Ű§Ù†ŰłŰȘŰ§Ù†"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Domain Name Resolver"
-msgstr "Domain Name Resolver"
+msgid "All remote machines"
+msgstr "كل Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű§ŰȘ Ű§Ù„ŰšŰčÙŠŰŻŰ©"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "ŰźŰ§ŰŻÙ… Ű§Ù„ÙˆÙŠŰš Apache"
+msgid "Install themes"
+msgstr "Ű«ŰšŰȘ Ű§Ù„ŰłÙ…Ű§ŰȘ"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
msgstr ""
-"ŰŁÙ‡Ù„Ű§ ŰšÙƒÙ… Ű§Ù„Ù‰ ۣۯۧ۩ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰšŰ±ÙŠŰŻ.\n"
-"\n"
-"Ù‡Ù†Ű§ ŰłÙŠÙ…ÙƒÙ†Ùƒ Ű„Űčۯۧۯ Ù†ŰžŰ§Ù… Ű§Ù„ŰȘÙ†ŰšÙŠÙ‡\n"
-
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "Mail alert configuration"
-msgstr "ŰȘÙ‡ÙŠŰŠŰ© ŰȘÙ†ŰšÙŠÙ‡ Ű§Ù„ŰšŰ±ÙŠŰŻ"
+" ŰȘŰ­ŰŻÙŠŰ«Ű§ŰȘ 2002 MandrakeSoft من Stew Benedict <sbenedict\\@mandrakesoft.com>"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "Mail alert"
-msgstr "ŰȘÙ†ŰšÙŠŰ© ŰšŰ±ÙŠŰŻÙŠ"
+msgid "Espanol"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "ÙŠŰ±ŰŹÙ‰ Ű§Ù„Ű„Ù†ŰȘ۞ۧ۱, ŰŹŰ§Ű±ÙŠ ŰȘŰ­Ù„ÙŠÙ„ Ű§Ù„Ù…Ù„Ù: %s"
+msgid "Preparing installation"
+msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰȘŰ­Ű¶ÙŠŰ± للŰȘŰ«ŰšÙŠŰȘ"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Content of the file"
-msgstr "Ù…Ű­ŰȘÙˆÙŠŰ§ŰȘ Ű§Ù„Ù…Ù„Ù"
+msgid "Edit selected host/network"
+msgstr "Ű­Ű±Ù‘Ű± Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ/Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…ŰźŰȘۧ۱۩"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Calendar"
-msgstr "Ű§Ù„ŰȘقويم"
+msgid "Add User -->"
+msgstr "Ű§Ű¶Ù Ù…ŰłŰȘŰźŰŻÙ… -->"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose file"
-msgstr "ۭۧŰȘÙŠŰ§Ű± ملف"
+msgid "Nauru"
+msgstr "Ù†Ű§ÙˆŰ±Ùˆ"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "but not matching"
-msgstr "لكن Ù„ÙŠŰł Ù…ÙˆŰ§ŰŠÙ…Ű©"
+msgid "True Type fonts installation"
+msgstr "ŰȘŰ«ŰšÙŠŰȘ ŰźŰ·ÙˆŰ· True Type"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "matching"
-msgstr "Ű§Ù„Ù…ÙˆŰ§ŰŠÙ…Ű©"
+msgid "Auto-detect printers connected directly to the local network"
+msgstr "ŰȘŰ­Ù‚Ù‘Ù‚ ŰąÙ„ÙŠŰ§Ù‹ من Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…ÙˆŰ”ÙˆÙ„Ű© Ù…ŰšŰ§ŰŽŰ±Ű©Ù‹ ŰšŰ§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ©"
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Settings"
-msgstr "Ű§Ù„Ű¶ŰšŰ·"
+msgid "LAN configuration"
+msgstr "Ű„Űčۯۧۯ LAN"
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "A tool to monitor your logs"
-msgstr "ۣۯۧ۩ Ù„Ù…Ű±Ű§Ù‚ŰšŰ© ŰłŰŹÙ„Ű§ŰȘ Ù†ŰžŰ§Ù…Ùƒ"
+msgid "hard disk model"
+msgstr "۷۱ۧŰČ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš"
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "search"
-msgstr "ۭۚ۫"
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "Ù„Ű§ يمكنك ۧ۳ŰȘŰźŰŻŰ§Ù… LVM Logical Volume Ù„Ù†Ù‚Ű·Ű© Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„ %s"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Mandrake Tools Explanation"
-msgstr "ŰŽŰ±ÙˆŰ­ ŰŁŰŻÙˆŰ§ŰȘ Mandrake"
+msgid "Get Windows Fonts"
+msgstr "Ű§Ű­Ű”Ù„ Űčلى ŰźŰ·ÙˆŰ· Windows"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Syslog"
-msgstr "syslog"
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Messages"
-msgstr "Ű§Ù„Ű±ŰłŰ§ŰŠÙ„"
+msgid "Iranian"
+msgstr "Ű§Ù„Ű„ÙŠŰ±Ű§Ù†ÙŠÙ‘Ű©"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "User"
-msgstr "Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…"
+msgid "Croatia"
+msgstr "ÙƒŰ±ÙˆŰ§ŰȘÙŠŰ§"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "/Help/_About..."
-msgstr "/Ù…ŰłŰ§ŰčŰŻŰ©/_Ű­ÙˆÙ„ Ű§Ù„ŰšŰ±Ù†Ű§Ù…ŰŹ..."
+msgid "Gateway:"
+msgstr "Ű§Ù„ŰšÙˆŰ§ŰšŰ©:"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Options/Test"
-msgstr "/ŰźÙŠŰ§Ű±Ű§ŰȘ/ۧ۟ŰȘۚۧ۱"
+msgid "Add server"
+msgstr "Ű§Ű¶Ù ŰźŰ§ŰŻÙ…"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/File/-"
-msgstr "/ملف/-"
+msgid "Remote printer name"
+msgstr "Ű§ŰłÙ… Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„ŰšŰčÙŠŰŻŰ©"
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "/File/Save _As"
-msgstr "/ملف/Ű­ÙŰž _ŰšŰ§ŰłÙ…"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together in order to highly reduce hacking risks."
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "<control>S"
-msgstr "<control>S"
+msgid "Device: "
+msgstr "Ű§Ù„ŰŹÙ‡Ű§ŰČ: "
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, c-format
-msgid "/File/_Save"
-msgstr "/ملف/_Ű­ÙŰž"
+msgid "Printerdrake"
+msgstr "Printerdrake"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "<control>O"
-msgstr "<control>O"
+msgid "License agreement"
+msgstr "ۧŰȘÙŰ§Ù‚ÙŠŰ© Ű§Ù„ŰȘŰ±ŰźÙŠŰ”"
-#: ../../standalone/logdrake:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "/File/_Open"
-msgstr "/ملف/_فŰȘŰ­"
+msgid "System Options"
+msgstr "ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„Ù†ŰžŰ§Ù…"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "<control>N"
-msgstr "<control>N"
+msgid "Please enter the directory where backups are stored"
+msgstr "ÙŰ¶Ù„Ű§Ù‹ ŰŁŰŻŰźÙ„ Ű§Ù„ŰŻÙ„ÙŠÙ„ Ű§Ù„Ù…ÙˆŰŹÙˆŰŻŰ© فيه Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠŰ©"
-#: ../../standalone/logdrake:1
+#: ../../security/level.pm:1
#, c-format
-msgid "/File/_New"
-msgstr "/ملف/_ŰŹŰŻÙŠŰŻ"
+msgid "Please choose the desired security level"
+msgstr "ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ Ù…ŰłŰȘوى Ű§Ù„ŰŁÙ…Ù† Ű§Ù„Ű°ÙŠ ŰȘŰ±ÙŠŰŻÙ‡"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Show only for the selected day"
-msgstr "Ű„Űč۱۶ ŰłŰŹÙ„Ű§ŰȘ Ű§Ù„ÙŠÙˆÙ… Ű§Ù„Ù…ŰźŰȘۧ۱ ÙÙ‚Ű·"
+msgid "This host is already in the list, it cannot be added again.\n"
+msgstr "Ù‡Ű°Ű§ Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ Ù…ÙˆŰŹÙˆŰŻ في Ű§Ù„Ù‚Ű§ŰŠÙ…Ű© Ù…ŰłŰšÙ‚Ű§Ù‹, Ù„Ű§ يمكن Ű§Ű¶Ű§ÙŰȘه Ù…Ű±Ű© ŰŁŰźŰ±Ù‰.\n"
-#: ../../standalone/mousedrake:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Emulate third button?"
-msgstr "Ù…Ű­Ű§ÙƒŰ§Ű© Ű§Ù„ŰČ۱ Ű§Ù„Ű«Ű§Ù„Ű«ŰŸ"
+msgid ", USB printer"
+msgstr ", ۷ۧۚŰčŰ© USB"
-#: ../../standalone/mousedrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Please choose your mouse type."
-msgstr "ÙŰ¶Ù„Ű§Ù‹, ۧ۟ŰȘ۱ نوŰč Ű§Ù„ÙŰŁŰ±Ű© Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙƒ."
+msgid "Choose the applications that will support the fonts:"
+msgstr "ۧ۟ŰȘ۱ Ű§Ù„ŰȘŰ·ŰšÙŠÙ‚Ű§ŰȘ Ű§Ù„ŰȘي ŰłŰȘŰŻŰčم Ű§Ù„ŰźŰ·ÙˆŰ· :"
-#: ../../standalone/net_monitor:1
+#: ../../steps.pm:1
#, c-format
-msgid "Connect %s"
-msgstr "ۧŰȘŰ”Ù„ ŰšÙ€ %s"
+msgid "Configure X"
+msgstr "ŰȘÙ‡ÙŠŰŠŰ© X"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Disconnect %s"
-msgstr "Ű§Ù‚Ű·Űč Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšÙ€ %s"
+msgid "Turkish (traditional \"F\" model)"
+msgstr "Ű§Ù„ŰȘÙ‘Ű±ÙƒÙŠŰ© (۷۱ۧŰČ \"F\" Ű§Ù„ŰȘÙ‚Ù„ÙŠŰŻÙŠ)"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr "ŰȘŰ­Ű°ÙŠŰ±, ŰȘم Ű§ÙŠŰŹŰ§ŰŻ ۧŰȘŰ”Ű§Ù„ Ű„Ù†ŰȘŰ±Ù†ŰȘ ۹۟۱, Ű±ŰšÙ…Ű§ يكون ÙŠŰłŰȘŰźŰŻÙ… ŰŽŰšÙƒŰȘك"
+msgid "Congratulations!"
+msgstr "ŰȘÙ‡Ű§Ù†ÙŠÙ†Ű§!"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "received"
-msgstr "Ù…ÙŰłŰȘÙ‚ŰšÙ„Ű©"
+msgid "Use owner id for execution"
+msgstr "ۧ۳ŰȘŰźŰŻÙ… owner id للŰȘÙ†ÙÙŠŰ°"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "transmitted"
-msgstr "Ù…ŰšŰčÙˆŰ«Ű©"
+msgid "Down"
+msgstr "ŰȘŰ­ŰȘ"
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "received: "
-msgstr "Ù…ÙŰłŰȘÙ‚ŰšÙ„: "
+msgid "Raw printer (No driver)"
+msgstr "۷ۧۚŰčŰ© ŰźŰ§Ù… (Ù„Ű§ Ù…ŰŽŰșل)"
-#: ../../standalone/net_monitor:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "sent: "
-msgstr "Ù…ÙŰ±ŰłÙ„: "
+msgid "Install rpm"
+msgstr "Ű«ŰšŰȘ rpm"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Local measure"
-msgstr "ۧۏ۱ۧۥ Ù…Ű­Ù„ÙŠ"
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
+msgstr ""
+"Ù„Ű·ŰšŰ§ŰčŰ© ملف من ۳۷۱ Ű§Ù„ŰŁÙˆŰ§Ù…Ű± يمكنك ŰŁÙ† ŰȘŰłŰȘŰźŰŻÙ… Ű§Ù„ŰŁÙ…Ű± \"%s <file>\" ŰŁÙˆ ŰŁÙ† ŰȘŰłŰȘŰźŰŻÙ… "
+"ۣۯۧ۩ ۷ۚۧŰčŰ© Ű±ŰłÙˆÙ…ÙŠŰ©: \"xpp <file>\" ŰŁÙˆ \"kprinter <file>\". Ű§Ù„ŰŁŰŻÙˆŰ§ŰȘ Ű§Ù„Ű±ŰłÙˆÙ…ÙŠŰ© "
+"ŰȘŰłÙ…Ű­ لك ۚۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ و ŰȘŰčŰŻÙŠÙ„ ŰźÙŠŰ§Ű±Ű§ŰȘÙ‡Ű§ ŰšŰłÙ‡ÙˆÙ„Ű©.\n"
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "average"
-msgstr "مŰȘÙˆŰłŰ·"
+msgid "Time remaining "
+msgstr "Ű§Ù„ÙˆÙ‚ŰȘ Ű§Ù„Ù…ŰȘŰšÙ‚ÙŠ"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Color configuration"
-msgstr "Ű„ŰčۯۧۯۧŰȘ Ű§Ù„ŰŁÙ„ÙˆŰ§Ù†"
+msgid "UK keyboard"
+msgstr "Ù„ÙˆŰ­Ű© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­ Ű§Ù„ŰšŰ±ÙŠŰ·Ű§Ù†ÙŠŰ©"
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
-"ÙŰŽÙ„ Ű§Ù„Ű„ŰȘŰ”Ű§Ù„.\n"
-"ŰȘŰŁÙƒŰŻ من Ű§Ù„ÙˆŰ”Ù„Ű© في Ù…Ű±ÙƒŰČ ŰȘŰ­ÙƒÙ… Mandrake."
+msgid "Unmount"
+msgstr "Ű§Ű­Ű°Ù Ű§Ù„ŰȘŰ­Ù…ÙŠÙ„"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Connection complete."
-msgstr "ŰȘم Ű§Ù„Ű„ŰȘŰ”Ű§Ù„."
+msgid "Uninstall Fonts"
+msgstr "Ű§ŰźŰ°Ù Ű§Ù„ŰźŰ·ÙˆŰ·"
-#: ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Disconnection from the Internet complete."
-msgstr "Ű§ÙƒŰȘمل Ù‚Ű·Űč Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ"
+msgid "Microsoft Explorer"
+msgstr "Microsoft Explorer"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Disconnection from the Internet failed."
-msgstr "ÙŰŽÙ„ Ù‚Ű·Űč Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ"
+msgid "German (no dead keys)"
+msgstr "Ű§Ù„ŰŁÙ„Ù…Ű§Ù†ÙŠŰ© (Ù„Ű§ Ù…ÙŰ§ŰȘÙŠŰ­ ميŰȘŰ©)"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Connecting to the Internet "
-msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ"
+msgid "Transferring %s..."
+msgstr "ŰŹŰ§Ű±ÙŠ نقل %s..."
-#: ../../standalone/net_monitor:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Disconnecting from the Internet "
-msgstr "ŰŹŰ§Ű±ÙŠ Ù‚Ű·Űč Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ"
+msgid "32 thousand colors (15 bits)"
+msgstr "32 ŰŁÙ„Ù لون (15 ŰšŰȘ)"
-#: ../../standalone/net_monitor:1
+#: ../../any.pm:1
#, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Ű§Ù†ŰȘ۞۱ من ÙŰ¶Ù„Ùƒ, ŰŹŰ§Ű±ÙŠ ۧ۟ŰȘۚۧ۱ Ű§Ù„Ű„ŰȘŰ”Ű§Ù„..."
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
+msgstr "يمكنك Ű§Ù„ŰȘŰ”ŰŻÙŠŰ± ۚۧ۳ŰȘŰźŰŻŰ§Ù… NFS ŰŁÙˆ Samba. ŰŁÙŠ Ù…Ù†Ù‡Ù…Ű§ ŰȘŰ±ÙŠŰŻ"
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Logs"
-msgstr "Ű§Ù„ŰłŰŹÙ„Ű§ŰȘ"
+msgid "Reboot"
+msgstr "ۧŰčۧۯ۩ Ű§Ù„ŰȘŰŽŰșيل"
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connection Time: "
-msgstr "وقŰȘ Ű§Ù„Ű„ŰȘŰ”Ű§Ù„:"
+msgid "Gambia"
+msgstr "ŰșŰ§Ù…ŰšÙŠŰ§"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Receiving Speed:"
-msgstr "۳۱ŰčŰ© Ű§Ù„Ű„ŰłŰȘÙ‚ŰšŰ§Ù„"
+msgid "Mandrake Control Center"
+msgstr "Ù…Ű±ÙƒŰČ ŰȘŰ­ÙƒÙ… Mandrake"
-#: ../../standalone/net_monitor:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Sending Speed:"
-msgstr "۳۱ŰčŰ© Ű§Ù„Ű„Ű±ŰłŰ§Ù„:"
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
+msgstr ""
+"يمكنك Ű§ŰŻŰźŰ§Ù„ Ù…Ù†Ű§ÙŰ° مŰȘنوŰčŰ©. \n"
+"ŰŁÙ…Ű«Ù„Ű© Ű”Ű§Ù„Ű­Ű© هي: 139/tcp 139/udp.\n"
+"Ű§Ù„Ù‚ Ù†ŰžŰ±Ű© Űčلى /etc/services لمŰČÙŠŰŻ من Ű§Ù„Ù…ŰčÙ„ÙˆÙ…Ű§ŰȘ."
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid "Statistics"
-msgstr "Ű§Ű­Ű”Ű§ŰŠÙŠŰ§ŰȘ"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
+msgstr ""
+"Ű§Ù„ŰŽŰ§ŰŽŰ©\n"
+"\n"
+" يمكن Ù„ŰšŰ±Ù†Ű§Ù…ŰŹ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ Ű§ÙƒŰȘŰŽŰ§Ù و ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰŽŰ§ŰŽŰ© Ű§Ù„Ù…ŰȘŰ”Ù„Ű© ŰšÙ…Ű§ÙƒÙŠÙ†ŰȘك\n"
+"ŰąÙ„ÙŠŰ§Ù‹. Ű§Ù† لم ÙŠŰ”Ù„ Ű°Ù„Ùƒ, يمكنك ۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„ŰŽŰ§ŰŽŰ© Ű§Ù„ŰȘي Ù„ŰŻÙŠÙƒ\n"
+"من Ű§Ù„Ù‚Ű§ŰŠÙ…Ű©."
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Profile "
-msgstr "Ű§Ù„ŰȘŰŽÙƒÙŠÙ„:"
+msgid "\t-Tape \n"
+msgstr "\t-Ű§Ù„ŰŽŰ±ÙŠŰ· \n"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakhelp:1
#, c-format
-msgid "Network Monitoring"
-msgstr "Ù…Ű±Ű§Ù‚ŰšŰ© Ű§Ù„ŰŽŰšÙƒŰ©"
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
+msgstr ""
+"Ù„Ű§ ÙŠÙˆŰŹŰŻ مŰȘŰ”ÙŰ­ Ù…Ű«ŰšŰȘ Űčلى Ù†ŰžŰ§Ù…Ùƒ, ÙŰ¶Ù„Ű§Ù‹ قم ŰšŰȘŰ«ŰšÙŠŰȘ مŰȘŰ”ÙŰ­ ۧ۰ۧ كنŰȘ ŰȘ۱ŰșŰš في ŰȘŰ”ÙŰ­ Ù†ŰžŰ§Ù… "
+"Ű§Ù„Ù…ŰłŰ§ŰčŰŻŰ©"
-#: ../../standalone/printerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Reading data of installed printers..."
-msgstr "ŰŹŰ§Ű±ÙŠ Ù‚Ű±Ű§ŰĄŰ© ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Ű§Ù„Ù…Ű«ŰšŰȘŰ©..."
+msgid "Remember this password"
+msgstr "ŰȘŰ°ÙƒÙ‘Ű± ÙƒÙ„Ù…Ű© Ű§Ù„ŰłŰ± Ù‡Ű°Ù‡"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Name/IP address of host:"
-msgstr "ŰčÙ†ÙˆŰ§Ù† IP/Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ:"
+msgid "Internet Connection Sharing is now enabled."
+msgstr "Ù…ŰŽŰ§Ű±ÙƒŰ© Ű„ŰȘŰ”Ű§Ù„ Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ Ù…Ù…ÙƒÙ‘ÙŽÙ†Ű© Ű§Ù„ŰąÙ†."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr "Ù‡Ű°Ű§ Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ Ù…ÙˆŰŹÙˆŰŻ في Ű§Ù„Ù‚Ű§ŰŠÙ…Ű© Ù…ŰłŰšÙ‚Ű§Ù‹, Ù„Ű§ يمكن Ű§Ű¶Ű§ÙŰȘه Ù…Ű±Ű© ŰŁŰźŰ±Ù‰.\n"
+msgid "\t-Network by SSH.\n"
+msgstr "\t-Ű§Ù„ŰŽŰšÙƒŰ© Űčن Ű·Ű±ÙŠÙ‚ SSH.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Scannerdrake"
-msgstr "Scannerdrake"
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
+msgstr ""
+" ۧ۰ۧ ŰȘم Ű§ÙƒŰȘŰŽŰ§Ù Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„Ù…Ű·Ù„ÙˆŰšŰ© ŰąÙ„ÙŠŰ§Ù‹, كل Ù…Ű§ Űčليك هو ۧ۟ŰȘÙŠŰ§Ű±Ù‡Ű§ من Ű§Ù„Ù‚Ű§ŰŠÙ…Ű© Ű«Ù… "
+"ŰŁŰ¶Ù Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…, ÙƒÙ„Ù…Ű© Ű§Ù„Ù…Ű±ÙˆŰ±, و/ŰŁÙˆ Ù…ŰŹÙ…ÙˆŰčŰ© Ű§Ù„Űčمل Ű§Ù† ۭۧŰȘŰŹŰȘ Ù„Ű°Ù„Ùƒ."
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "ÙŰ¶Ù„Ű§ ŰŁŰŻŰźÙ„ Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ ŰŁÙˆ ŰčÙ†ÙˆŰ§Ù† IP.\n"
+msgid "Use the free space on the Windows partition"
+msgstr "ۧ۳ŰȘŰźŰŻÙ… Ű§Ù„Ù…ŰłŰ§Ű­Ű© Ű§Ù„ÙŰ§Ű±ŰșŰ© Űčلى ŰȘŰŹŰČŰŠŰ© Windows"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
-msgstr "ۧ۟ŰȘ۱ Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ Ű§Ù„ŰȘي ÙŠŰŹŰš ŰŁÙ† ŰȘŰȘÙˆÙŰ± له Ű§Ù„Ù…Ű§ŰłŰ­Ű§ŰȘ Ű§Ù„Ű¶ÙˆŰŠÙŠŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ©:"
+msgid "%s found on %s, configure it automatically?"
+msgstr "%s ŰȘم Ű§ÙŠŰŹŰ§ŰŻÙ‡ Űčلى %s, هل ŰȘŰ±ÙŠŰŻ ŰȘÙ‡ÙŠŰŠŰȘه ŰąÙ„ÙŠŰ§Ù‹ŰŸ"
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Sharing of local scanners"
-msgstr "Ù…ŰŽŰ§Ű±ÙƒŰ© Ű§Ù„Ù…Ű§ŰłŰ­Ű§ŰȘ Ű§Ù„Ű¶ÙˆŰŠÙŠŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ©"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
-#: ../../standalone/scannerdrake:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "This machine"
-msgstr "Ù‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű©"
+msgid "XFree86 driver: %s\n"
+msgstr "Ù…ŰŽŰșل XFree86: %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove selected host"
-msgstr "Ű§Ű­Ű°Ù Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ Ű§Ù„Ù…ŰźŰȘۧ۱"
+msgid "This host/network is already in the list, it cannot be added again.\n"
+msgstr "Ù‡Ű°Ű§ Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ/Ű§Ù„ŰŽŰšÙƒŰ© Ù…ÙˆŰŹÙˆŰŻ في Ű§Ù„Ù‚Ű§ŰŠÙ…Ű© Ù…ŰłŰšÙ‚Ű§Ù‹, Ù„Ű§ يمكن Ű§Ű¶Ű§ÙŰȘه Ù…Ű±Ű© ŰŁŰźŰ±Ù‰.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Edit selected host"
-msgstr "ۭ۱۱ Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ Ű§Ù„Ù…ŰźŰȘۧ۱"
+msgid ""
+"\n"
+" DrakBackup Report \n"
+"\n"
+msgstr ""
+"\n"
+" ŰȘÙ‚Ű±ÙŠŰ± DrakBackup \n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add host"
-msgstr "Ű§Ű¶Ù Ù…ŰłŰȘŰ¶ÙŠÙ"
+msgid "Choose the packages you want to install"
+msgstr "ۧ۟ŰȘ۱ Ű§Ù„Ű­ŰČم Ű§Ù„ŰȘي ŰȘŰ±ÙŠŰŻ ŰȘŰ«ŰšÙŠŰȘÙ‡Ű§"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr "ŰȘÙˆŰŹŰŻ Ù…Ű§ÙƒÙŠÙ†Ű§ŰȘ يمكن ۧ۳ŰȘŰźŰŻŰ§Ù… Ű§Ù„Ù…Ű§ŰłŰ­Ű§ŰȘ Ű§Ù„Ű¶ÙˆŰŠÙŠŰ© Ù…Ù†Ù‡Ű§:"
+msgid "Papua New Guinea"
+msgstr "ŰšŰ§ŰšÙˆŰ§ ŰșÙŠÙ†ÙŠŰ§ Ű§Ù„ŰŹŰŻÙŠŰŻŰ©"
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Usage of remote scanners"
-msgstr "ۧ۳ŰȘŰźŰŻŰ§Ù… Ű§Ù„Ù…Ű§ŰłŰ­Ű§ŰȘ Ű§Ù„Ű¶ÙˆŰŠÙŠŰ© Ű§Ù„ŰšŰčÙŠŰŻŰ©"
+msgid "Serbian (cyrillic)"
+msgstr "Ű§Ù„Ű”Ű±ŰšÙŠŰ© (ŰłÙŠŰ±ÙŠÙ„ÙŠ)"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "All remote machines"
-msgstr "كل Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű§ŰȘ Ű§Ù„ŰšŰčÙŠŰŻŰ©"
+msgid "Make kernel message quiet by default"
+msgstr "ۧۏŰčل Ű±ŰłŰ§ŰŠÙ„ Ű§Ù„Ù†ÙˆŰ§Ű© Ű”Ű§Ù…ŰȘŰ© Ű§ÙŰȘŰ±Ű§Ű¶ÙŠŰ§Ù‹"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
-msgstr "ŰȘÙˆŰ­ŰŻ Ù…Ű§ÙƒÙŠÙ†Ű§ŰȘ ÙŠŰŹŰš ŰŁÙ† ŰȘكون Ű§Ù„Ù…Ű§ŰłŰ­Ű§ŰȘ Ű§Ù„Ű¶ÙˆŰŠÙŠŰ© Ű§Ù„Ù…ÙˆŰ”ÙˆÙ„Ű© Ù…Ű­Ù„ÙŠŰ§Ù‹ مŰȘÙˆÙŰ±Ű© Ù„Ù‡Ű§:"
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
+msgstr ""
+"هل ŰȘŰ±ÙŠŰŻ ŰȘŰčيين Ù‡Ű°Ù‡ Ű§Ù„Ű·Ű§ŰšŰčŰ© (\"%s\")\n"
+"ÙƒŰ·Ű§ŰšŰčŰ© Ű§ÙŰȘŰ±Ű§Ű¶ÙŠŰ©ŰŸ"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Use the scanners on hosts: "
-msgstr "ۧ۳ŰȘŰźŰŻÙ… Ű§Ù„Ù…Ű§ŰłŰ­Ű§ŰȘ Ű§Ù„Ű¶ÙˆŰŠÙŠŰ© Űčلى Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙŰ§ŰȘ: "
+msgid "The DHCP end range"
+msgstr "Ű­ŰŻÙˆŰŻ DHCP end"
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Use scanners on remote computers"
-msgstr "ۧ۳ŰȘŰźŰŻÙ… Ű§Ù„Ù…Ű§ŰłŰ­Ű§ŰȘ Ű§Ù„Ű¶ÙˆŰŠÙŠŰ© Űčلى Ű§Ù„Ű­ÙˆŰ§ÙŠŰłŰš Ű§Ù„ŰšŰčÙŠŰŻŰ©"
+msgid "Creating bootdisk..."
+msgstr "Ű§Ù†ŰŽŰ§ŰĄ Ù‚Ű±Ű” Ű§Ù„Ű„Ù‚Ù„Ű§Űč..."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Ù…ŰŽŰ§Ű±ÙƒŰ© Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Űčلى Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙŰ§ŰȘ: "
+msgid "Wait please, testing your connection..."
+msgstr "Ű§Ù†ŰȘ۞۱ من ÙŰ¶Ù„Ùƒ, ŰŹŰ§Ű±ÙŠ ۧ۟ŰȘۚۧ۱ Ű§Ù„Ű„ŰȘŰ”Ű§Ù„..."
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr "Ű§Ù„Ù…Ű§ŰłŰ­Ű§ŰȘ Ű§Ù„Ű¶ÙˆŰŠÙŠŰ© Űčلى Ù‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű© مŰȘÙˆÙŰ±Ű© Ù„Ù„Ű­ÙˆŰ§ŰłÙŠŰš Ű§Ù„ŰŁŰźŰ±Ù‰"
+msgid "Bringing down the network"
+msgstr "ŰŹŰ§Ű±ÙŠ ۧŰșÙ„Ű§Ù‚ Ű§Ù„ŰŽŰšÙƒŰ©"
-#: ../../standalone/scannerdrake:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
-"يمكنك ŰŁÙŠŰ¶Ű§Ù‹ ŰŁÙ† ŰȘÙ‚Ű±Ű± Ù‡Ù†Ű§ ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ű§Ù„Ù…Ű§ŰłŰ­Ű§ŰȘ Ű§Ù„Ű¶ÙˆŰŠÙŠŰ© Űčلى Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű§ŰȘ Ű§Ù„ŰšŰčÙŠŰŻŰ© ÙŠŰŹŰš "
-"ŰŁÙ† ŰȘكون مŰȘÙˆÙŰ±Ű© Ù„Ù‡Ű°Űč Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű©."
+msgid "Login ID"
+msgstr "Ű§ŰłÙ… Ű§Ù„ŰŻŰźÙˆÙ„"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
msgstr ""
-"Ù‡Ù†Ű§ يمكنك ۧ۟ŰȘÙŠŰ§Ű± ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ű§Ù„Ù…Ű§ŰłŰ­Ű§ŰȘ Ű§Ù„Ű¶ÙˆŰŠÙŠŰ© Ű§Ù„Ù…ŰȘŰ”Ù„Ű© ŰšÙ‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű© يمكن Ű§Ù„ÙˆŰ”ÙˆÙ„ "
-"Ű§Ù„ÙŠÙ‡Ű§ من Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű§ŰȘ Ű§Ù„ŰšŰčÙŠŰŻŰ© و Űčن Ű·Ű±ÙŠÙ‚ ŰŁÙŠ Ù…Ű§ÙƒÙŠÙ†Ű§ŰȘ ŰšŰčÙŠŰŻŰ©."
+"NFS ŰšŰ±ÙˆŰȘوكول ێۧۊŰč Ù„Ù…ŰŽŰ§Ű±ÙƒŰ© Ű§Ù„Ù…Ù„ÙŰ§ŰȘ Űčلى ŰŽŰšÙƒŰ§ŰȘ\n"
+"TCP/IP. Ù‡Ű°Ù‡ Ű§Ù„ŰźŰŻÙ…Ű© ŰȘŰłÙ…Ű­ لك ŰšŰ§Ù„ŰȘŰ­ÙƒÙ… ŰšŰ§Ù„Ù…Ù„ÙŰ§ŰȘ Űčن Ű·Ű±ÙŠÙ‚ NFS."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Re-generating list of configured scanners ..."
-msgstr "ŰŹŰ§Ű±ÙŠ ۧŰčۧۯ۩ ŰȘÙˆÙ„ÙŠŰŻ Ù‚Ű§ŰŠÙ…Ű© Ű§Ù„Ù…Ű§ŰłŰ­Ű§ŰȘ Ű§Ù„Ű¶ÙˆŰŠÙŠŰ© Ű§Ù„Ù…ŰčŰŻÙ‘Ű© ..."
+msgid "DHCP Client"
+msgstr "DHCP Ű§Ù„Űčميل"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Searching for new scanners ..."
-msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰšŰ­Ű« Űčن Ù…Ű§ŰłŰ­Ű§ŰȘ Ű¶ÙˆŰŠÙŠŰ© ŰŹŰŻÙŠŰŻŰ©..."
+msgid "dismiss"
+msgstr "Ű§Ù‡Ù…Ű§Ù„"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for configured scanners ..."
-msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰšŰ­Ű« Űčن Ù…Ű§ŰłŰ­Ű§ŰȘ Ű¶ÙˆŰŠÙŠŰ© مŰčŰŻÙ‘Ű©..."
+msgid "Printing/Scanning on \"%s\""
+msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„Ű·ŰšŰ§ŰčŰ©/Ű§Ù„Ù…ŰłŰ­ Űčلى \"%s\""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Scanner sharing"
-msgstr "Ù…ŰŽŰ§Ű±ÙƒŰ© Ű§Ù„Ù…Ű§ŰłŰ­Ű§ŰȘ Ű§Ù„Ű¶ÙˆŰŠÙŠŰ©"
+msgid "omit raid modules"
+msgstr "RAID Ű§Ù‡Ù…Ù„ ÙˆŰ­ŰŻŰ§ŰȘ Ű§Ù„"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
-msgid "Add a scanner manually"
-msgstr "ŰŁŰ¶Ù Ù…Ű§ŰłŰ­ Ű¶ÙˆŰŠÙŠ ÙŠŰŻÙˆÙŠŰ§Ù‹"
+msgid ""
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
+msgstr ""
+"lpd هو Ù…Ű±Ű§Ù‚Űš Ű§Ù„Ű·ŰšŰ§ŰčŰ© Ű§Ù„Ű°ÙŠ ÙŠŰ­ŰȘŰ§ŰŹÙ‡ ŰŁÙ…Ű± lpr للŰčمل ŰšŰŽÙ„ Ű”Ű­ÙŠŰ­. ŰŁŰłŰ§ŰłŰ§Ù‹\n"
+"هو ŰźŰ§ŰŻÙ… ÙŠÙˆŰ”Ù„ ÙˆŰžŰ§ŰŠÙ Ű§Ù„Ű·ŰšŰ§ŰčŰ© Ű§Ù„Ù‰ Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Search for new scanners"
-msgstr "Ű§Ù„ŰšŰ­Ű« Űčن Ù…Ű§ŰłŰ­Ű§ŰȘ Ű¶ÙˆŰŠÙŠŰ© ŰŹŰŻÙŠŰŻŰ©..."
+msgid "Internet Connection Configuration"
+msgstr "Ű„ŰčۯۧۯۧŰȘ Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ"
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr "Ù„Ű§ ŰȘÙˆŰŹŰŻ Ù…Ű§ŰłŰ­Ű§ŰȘ Ű¶ÙˆŰŠÙŠŰ© مŰȘÙˆÙŰ±Ű© Űčلى Ù†ŰžŰ§Ù…Ùƒ.\n"
+msgid "comma separated numbers"
+msgstr "ŰŁŰ±Ù‚Ű§Ù… Ù…ÙŰ”ÙˆÙ„Ű© ŰšŰ§Ù„ÙŰ§Ű”Ù„Ű©"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
msgstr ""
-"Ű§Ù„Ù…Ű§ŰłŰ­Ű© Ű§Ù„Ű¶ÙˆŰŠÙŠŰ© Ű§Ù„ŰȘŰ§Ù„ÙŠŰ©\n"
-"\n"
-"%s\n"
-"مŰȘÙˆÙŰ±Ű© Ù„Ù†ŰžŰ§Ù…Ùƒ.\n"
+"ŰčÙ†ŰŻ ۧ۟ŰȘÙŠŰ§Ű±Ùƒ Ù„ŰŹÙ‡Ű§ŰČ, ŰłŰȘŰłŰȘŰ·ÙŠŰč Ű±Ű€ÙŠŰ© مŰčÙ„ÙˆÙ…Ű§ŰȘ ŰȘŰ§ŰŹÙ‡Ű§ŰČ ÙÙŠ Ű§Ù„Ű­Ù‚ÙˆÙ„ Ű§Ù„Ù…ŰčŰ±ÙˆŰ¶Ű© في Ű§Ù„Ű„Ű·Ű§Ű± "
+"Ű§Ù„ŰŁÙŠÙ…Ù† (\"مŰčÙ„ÙˆÙ…Ű§ŰȘ\")"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule up one level"
+msgstr "Ű§Ù†Ù‚Ù„ Ű§Ù„Ù‚Ű§ŰčŰŻŰ© Ű§Ù„Ù…ŰźŰȘۧ۱۩ Ű§Ù„Ù‰ فوق ŰšÙ…ŰłŰȘوى ÙˆŰ§Ű­ŰŻ"
#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"The following scanners\n"
+"The following scanner\n"
"\n"
"%s\n"
-"are available on your system.\n"
+"is available on your system.\n"
msgstr ""
-"Ű§Ù„Ù…Ű§ŰłŰ­Ű§ŰȘ Ű§Ù„Ű¶ÙˆŰŠÙŠŰ© Ű§Ù„ŰȘŰ§Ù„ÙŠŰ©\n"
+"Ű§Ù„Ù…Ű§ŰłŰ­Ű© Ű§Ù„Ű¶ÙˆŰŠÙŠŰ© Ű§Ù„ŰȘŰ§Ù„ÙŠŰ©\n"
"\n"
"%s\n"
"مŰȘÙˆÙŰ±Ű© Ù„Ù†ŰžŰ§Ù…Ùƒ.\n"
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"ŰȘمŰȘ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Ù…Ű§ŰłŰ­ Ű§Ù„Ű¶ÙˆŰŠÙŠ %s.\n"
-"يمكنك Ű§Ù„ŰąÙ† Ù…ŰłŰ­ Ű§Ù„Ù…ŰłŰȘÙ†ŰŻŰ§ŰȘ ۚۧ۳ŰȘŰźŰŻŰ§Ù… \"XSane\" من ÙŰ±Űč ÙˆŰłŰ§ŰŠŰ· مŰȘŰčŰŻŰŻŰ©/ŰšŰ±Ű§Ù…ŰŹ Ű±ŰłÙˆÙ…ÙŠŰ© "
-"في Ù‚Ű§ŰŠÙ…Ű© Ű§Ù„ŰȘŰ·ŰšÙŠÙ‚Ű§ŰȘ."
-
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "choose device"
-msgstr "ۧ۟ŰȘ۱ Ű§Ù„ŰŹÙ‡Ű§ŰČ "
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "هل ŰȘŰ±ÙŠŰŻ فŰčÙ„Ű§Ù‹ Ű­Ű°Ù Ű§Ù„Ű·Ű§ŰšŰčŰ© \"%s\"۟"
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr "ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ Ű§Ù„ŰŹÙ‡Ű§ŰČ Ű§Ù„Ù…ŰȘŰ”Ù„ ŰšÙ‡ %s"
+msgid "I can't find any room for installing"
+msgstr "Ù„Ű§ يمكنني Ű§ÙŠŰŹŰ§ŰŻ Ù…ŰłŰ§Ű­Ű© ÙŰ§Ű±ŰșŰ© للŰȘŰ«ŰšÙŠŰȘ"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for scanners ..."
-msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰšŰ­Ű« Űčن Ű§Ù„Ù…Ű§ŰłŰ­Ű§ŰȘ Ű§Ù„Ű¶ÙˆŰŠÙŠŰ©..."
+msgid "Default printer"
+msgstr "Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠŰ©"
-#: ../../standalone/scannerdrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Auto-detect available ports"
-msgstr "ŰȘŰ­Ù‚Ù‚ ŰąÙ„ÙŠŰ§Ù‹ من Ű§Ù„Ù…Ù†Ű§ÙŰ° Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű©"
+msgid ""
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
+msgstr ""
+"Ù„Ù‚ŰŻ قمŰȘ ŰšŰȘÙ‡ÙŠŰŠŰ© Ű·Ű±Ù‚ مŰȘŰčŰŻŰŻŰ© Ù„Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ.\n"
+"ۧ۟ŰȘ۱ Ű§Ù„Ű·Ű±ÙŠÙ‚Ű© Ű§Ù„ŰȘي ŰȘŰ±ÙŠŰŻ ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡Ű§.\n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr "(Ù…Ù„Ű­ÙˆŰžŰ©: Ű§Ù„Ù…Ù†Ű§ÙŰ° Ű§Ù„Ù…ŰȘÙˆŰ§ŰČÙŠŰ© Ù„Ű§ يمكن Ű§Ù„ŰȘŰ­Ù‚Ù‚ Ù…Ù†Ù‡Ű§ ŰąÙ„ÙŠŰ§Ù‹)"
+msgid "Modify RAID"
+msgstr "ŰȘŰčŰŻÙŠÙ„ RAID"
-#: ../../standalone/scannerdrake:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
msgstr ""
-"Ű§Ù„Ù…Ű§ŰłŰ­ Ű§Ù„Ű¶ÙˆŰŠÙŠ %s ÙŠŰŹŰš ۧŰčŰŻŰ§ŰŻÙ‡ Űčن Ű·Ű±ÙŠÙ‚ PrinterDrake.\n"
-"يمكن ŰȘŰŽŰșيل PrinterDrake من Ù…Ű±ÙƒŰČ ŰȘŰ­ÙƒÙ… Mandrake في Ù‚ŰłÙ… Ű§Ù„ŰčŰȘۧۯ."
+"ŰȘم Ű§ÙƒŰȘŰŽŰ§Ù ŰšŰ·Ű§Ù‚Ű© ISDN PCI, لكن لم يŰȘم Ű§Ù„ŰȘŰčŰ±Ù Űčلى نوŰčÙ‡Ű§. ÙŰ¶Ù„Ű§Ù‹ ۧ۟ŰȘ۱ ŰšŰ·Ű§Ù‚Ű© PCI "
+"في Ű§Ù„ŰŽŰ§ŰŽŰ© Ű§Ù„ŰȘŰ§Ù„ÙŠŰ©."
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "The %s is unsupported"
-msgstr "Ù‡Ű°Ű§ Ű§Ù„Ù€ %s ŰșÙŠŰ± Ù…ŰŻŰčوم"
+msgid "Add user"
+msgstr "Ű§Ű¶Ù Ù…ŰłŰȘŰźŰŻÙ…"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr "Ű§Ù„Ù€ %s ŰșÙŠŰ± مŰčŰ±ÙˆÙ من Ù‚ŰšÙ„ Ù‡Ű°Ű§ Ű§Ù„Ű„Ű”ŰŻŰ§Ű± من Scannerdrake."
+msgid "RAID-disks %s\n"
+msgstr "ŰŁÙ‚Ű±Ű§Ű” RAID %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
-msgstr "Ű§Ù„Ù€ %s ŰșÙŠŰ± Ù…ŰŻŰčوم من Ù‡Ű°Ű§ Ű§Ù„Ű„Ű”ŰŻŰ§Ű± من Mandrake Linux."
+msgid "Liberia"
+msgstr "Ù„ÙŠŰšŰ±ÙŠŰ§"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Port: %s"
-msgstr "Ű§Ù„Ù…Ù†ÙŰ°: %s"
+msgid ""
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
+msgstr ""
+"ÙŰ¶Ù„Ű§Ù‹ ŰŁŰŻŰźÙ„ Ű§ŰłÙ… Ű§Ù„ÙˆŰ§ŰŹÙ‡Ű© Ű§Ù„Ù…ŰȘŰ”Ù„Ű© ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ.\n"
+"\n"
+"ŰŁÙ…Ű«Ù„Ű©:\n"
+"\t\tppp+ Ù„ÙˆŰ”Ù„Ű§ŰȘ Ű§Ù„Ù…ÙˆŰŻÙ… و DSL, \n"
+"\t\teth0, ŰŁÙˆ eth1 Ù„ÙˆŰ”Ù„Ű§ŰȘ Ű§Ù„ÙƒÙŠŰšÙ„, \n"
+"\t\tippp+ Ù„ÙˆŰ”Ù„Ű§ŰȘ ISDN.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid ", "
-msgstr ", "
+msgid "Choose your keyboard"
+msgstr "ۧ۟ŰȘ۱ Ù„ÙˆŰ­Ű© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­ Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙƒ"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Detected model: %s"
-msgstr "ŰȘم Ű§ÙƒŰȘŰŽŰ§Ù Ű§Ù„Ű·Ű±Ű§ŰČ: %s"
+msgid "Format partitions"
+msgstr "ŰȘŰŹÙ‡ÙŠŰČ Ű§Ù„ŰȘŰŹŰČۊۧŰȘ"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " ("
-msgstr " ("
+msgid "Automatic correction of CUPS configuration"
+msgstr "ŰȘŰ”Ű­ÙŠŰ­ ŰąÙ„ÙŠ لŰȘÙ‡ÙŠŰŠŰ© CUPS"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Select a scanner model"
-msgstr "ۧ۟ŰȘ۱ ۷۱ۧŰČ Ű§Ù„Ù…Ű§ŰłŰ­ Ű§Ù„Ű¶ÙˆŰŠÙŠ"
+msgid "Running \"%s\" ..."
+msgstr "ŰŹŰ§Ű±ÙŠ ŰȘŰŽŰșيل \"%s\" ..."
-#: ../../standalone/scannerdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr "%s ŰșÙŠŰ± Ù…ÙˆŰŹÙˆŰŻ في Ù‚Ű§ŰčŰŻŰ© ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„Ù…Ű§ŰłŰ­Ű§ŰȘ Ű§Ù„Ű¶ÙˆŰŠÙŠŰ©, هل ŰȘŰ±ÙŠŰŻ ŰȘÙ‡ÙŠŰŠŰȘه ÙŠŰŻÙˆÙŠŰ§Ù‹ŰŸ"
+msgid "enable radio support"
+msgstr "ŰȘمكين ŰŻŰčم Ű§Ù„Ű±Ű§ŰŻÙŠÙˆ"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "%s ŰȘم Ű§ÙŠŰŹŰ§ŰŻÙ‡ Űčلى %s, هل ŰȘŰ±ÙŠŰŻ ŰȘÙ‡ÙŠŰŠŰȘه ŰąÙ„ÙŠŰ§Ù‹ŰŸ"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Hardware probing in progress"
-msgstr "ŰŹŰ§Ű±ÙŠ Ű§Ù„ŰȘŰ­Ù‚Ù‚ من Ű§Ù„ŰčŰȘۧۯ"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices were added:\n"
-msgstr "ŰȘمŰȘ Ű§Ű¶Ű§ÙŰ© ŰšŰč۶ Ű§Ù„ŰčŰȘۧۯ:\n"
+msgid "Scanner sharing to hosts: "
+msgstr "Ù…ŰŽŰ§Ű±ÙƒŰ© Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ Űčلى Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙŰ§ŰȘ: "
-#: ../../standalone/service_harddrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "ŰȘمŰȘ ۧŰČŰ§Ù„Ű© ŰšŰč۶ Ű§Ù„ŰŁŰŹÙ‡ŰČŰ© في ÙŰŠŰ© Ű§Ù„ŰčŰȘۧۯ \"%s\":\n"
+msgid "Loopback file name: %s"
+msgstr "Ű§ŰłÙ… ملف Loopback: %s"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
-msgstr ""
-"Ù†ŰŹŰ§Ű­ MandrakeSoft Ù…ŰšÙ†ÙŠ Űčلى Ù…ŰšŰŻŰŁ Ű­Ű±ÙŠŰ© Ű§Ù„ŰšŰ±Ű§Ù…Ű­. Ù†ŰžŰ§Ù… Ű§Ù„ŰȘŰŽŰșيل Ű§Ù„ŰŹŰŻÙŠŰŻ Ű§Ù„ŰźŰ§Ű” ŰšÙƒ "
-"هو نŰȘÙŠŰŹŰ© للŰȘŰčŰ§ÙˆÙ† و Ű§Ù„Űčمل Ű§Ù„ŰŹŰ§ŰŻ من ŰŹŰČŰĄ من Ù…ŰŹŰȘمŰč Ù„ÙŠÙ†ÙƒŰł Ű­ÙˆÙ„ Ű§Ù„ŰčŰ§Ù„Ù…"
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "۱ۏۧۥ ۧ۟ŰȘ۱ Ű§Ù„Ű·Ű§ŰšŰčŰ© Ű§Ù„ŰȘي ŰłŰȘŰ°Ù‡Űš Ű§Ù„ÙŠÙ‡Ű§ ÙˆŰžŰ§ŰŠÙ Ű§Ù„Ű·ŰšŰ§ŰčŰ©."
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Welcome to the Open Source world."
-msgstr "ŰŁÙ‡Ù„Ű§Ù‹ ŰšÙƒ في ŰčŰ§Ù„Ù… Ű§Ù„Ù…Ű”Ű§ŰŻŰ± Ű§Ù„Ù…ÙŰȘÙˆŰ­Ű©"
+msgid "Do not transfer printers"
+msgstr "Ù„Ű§ ŰȘنقل Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ"
-#: ../../share/advertising/01-thanks.pl:1
-#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr "ŰŽÙƒŰ±Ű§Ù‹ Ù„Ű§ŰźŰȘÙŠŰ§Ű±Ùƒ Mandrake Linux 9.1"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Delay before booting the default image"
+msgstr "ŰȘوقيŰȘ Ù…Ű§ Ù‚ŰšÙ„ Ű§Ù‚Ù„Ű§Űč Ű§Ù„Ű”ÙˆŰ±Ű© Ű§Ù„Ű§ÙŰȘŰ±Ű§Ű¶ÙŠŰ©"
-#: ../../share/advertising/02-community.pl:1
-#, c-format
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+" DUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
msgstr ""
-"Ù„Ù…ŰŽŰ§Ű±ÙƒŰȘÙ†Ű§ ŰšÙ…ŰčŰ±ÙŰȘك و Ù„Ù„Ù…ŰłŰ§ŰčŰŻŰ© في ŰšÙ†Ű§ŰĄ ŰŁŰŻÙˆŰ§ŰȘ Ù„ÙŠÙ†ÙƒŰł, Ű§Ù†Ű¶Ù… Ű§Ù„Ù‰ منŰȘŰŻÙŠŰ§ŰȘ Ű§Ù„Ù†Ù‚Ű§ŰŽ "
-"Ű§Ù„ŰȘي ŰłŰȘŰŹŰŻÙ‡Ű§ في Ű”ÙŰ­Ű© \"Community\" Űčلى موقŰčÙ†Ű§"
+"\n"
+"ŰŹÙ…ÙŠŰč Ű§Ù„Ű­Ù‚ÙˆÙ‚ Ù…Ű­ÙÙˆŰžŰ© (C) 2001-2002 لـMandrakeSoft \n"
+"\tDUPONT Sebastien (Ű§Ù„Ű„Ű”ŰŻŰ§Ű± Ű§Ù„ŰŁŰ”Ù„ÙŠ)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" Ù‡Ű°Ű§ Ű§Ù„ŰšŰ±Ù†Ű§Ù…ŰŹ هو ŰšŰ±Ù†Ű§Ù…ŰŹ ۭ۱; يمكنك ۧŰčۧۯ۩ ŰȘوŰČيŰčŰ© و/ŰŁÙˆ ŰȘŰčŰŻÙŠÙ„Ù‡\n"
+" ŰȘŰ­ŰȘ ŰšÙ†ÙˆŰŻ ۱۟۔۩ GNU Ű§Ù„ŰčÙ…ÙˆÙ…ÙŠŰ© Ű§Ù„ŰŽŰ§Ù…Ù„Ű© (GPL) ÙƒÙ…Ű§ Ù†ÙŰŽÙŰ±ŰȘ Űčن Ű·Ű±ÙŠÙ‚\n"
+" ŰŹÙ…ŰčÙŠŰ© Ű§Ù„ŰšŰ±Ù…ŰŹÙŠŰ§ŰȘ Ű§Ù„Ű­Ű±Ű©; Ű„Ù…Ű§ ۧۄ۔ۯۧ۱ Ű§Ù„Ű«Ű§Ù†ÙŠ من Ű§Ù„ŰȘŰ±ŰźÙŠŰ” ŰŁÙˆ\n"
+" ŰŁÙŠ Ù†ŰłŰźŰ© ŰȘŰ§Ù„ÙŠŰ© (ۭ۳ۚ ۧ۟ŰȘÙŠŰ§Ű±Ùƒ).\n"
+"\n"
+" Ù‡Ű°Ű§ Ű§Ù„ŰšŰ±Ù†Ű§Ù…ŰŹ يُوŰČَّŰč Űčلى ŰŁÙ…Ù„ ŰŁÙ† يكون Ù…ÙÙŠŰŻŰ§,\n"
+" لكن ŰŻÙˆÙ† ŰŁÙŠ Ű¶Ù…Ű§Ù†â€™; Ű­ŰȘى ŰšŰŻÙˆÙ† Ű§Ù„Ű¶Ù…Ű§Ù†Ű© Ű§Ù„Ù…ÙÙ‡ÙˆÙ…Ű©\n"
+" Ù„Ù„Ű„ŰȘۏۧ۱ ŰŁÙˆ Ű§Ù„Ù…Ù†Ű§ŰłŰšŰ© لŰș۱۶ مŰčين. Ű§Ù†ŰžŰ±\n"
+" ۱۟۔۩ GNU Ű§Ù„ŰčÙ…ÙˆÙ…ÙŠŰ© Ű§Ù„ŰŽŰ§Ù…Ù„Ű© للŰȘÙŰ§Ű”ÙŠÙ„.\n"
+"\n"
+" ÙŠŰŹŰš ŰŁÙ† ŰȘكون Ù‚ŰŻ ŰȘŰłÙ„Ù…ŰȘ Ù†ŰłŰźŰ© من ŰȘŰ±ŰźÙŠŰ” GNU Ű§Ù„ŰčÙ…ÙˆÙ…ÙŠŰ© Ű§Ù„ŰŽŰ§Ù…Ù„Ű©\n"
+" مŰč Ű§Ù„ŰšŰ±Ù†Ű§Ù…ŰŹ; في Ű­Ű§Ù„Ű© ŰčŰŻÙ… ŰȘŰłÙ„Ù… Ű§Ù„Ű±ŰźŰ”Ű© Ű±Ű§ŰłÙ„ ŰŹÙ…ŰčÙŠŰ© Ű§Ù„ŰšŰ±Ù…ŰŹÙŠŰ§ŰȘ Ű§Ù„Ű­Ű±Ű© Űčلى "
+"Ű§Ù„ŰčÙ†ÙˆŰ§Ù† Ű§Ù„ŰȘŰ§Ù„ÙŠ\n"
+" Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA "
+"02111-1307, USA.\n"
+"\n"
+" ŰŽÙƒŰ± ۟ۧ۔ Ű§Ù„Ù‰:\n"
+" - pfm2afm: \n"
+"\t من Ken Borgendale:\n"
+"\t ÙŠŰ­ÙˆÙ‘Ù„ ŰźŰ·ÙˆŰ· .pfm في Windows Ű§Ù„Ù‰ ŰźŰ·ÙˆŰ· .afm (Adobe Font Matrix)\n"
+" - type1inst:\n"
+"\t من James Macnicol: \n"
+"\t ÙŠÙˆÙ„ŰŻ type1inst Ù…Ù„ÙŰ§ŰȘ fonts.dir و fonts.scale و Fontmap.\n"
+" - ttf2pt1: \n"
+"\t من Andrew Weeks, Frank Siegert, Thomas Henlich و Sergey Babkin \n"
+" ÙŠŰ­ÙˆÙ„ ŰźŰ·ÙˆŰ· ttf Ű§Ù„Ù‰ ŰźŰ·ÙˆŰ· afm و pfb\n"
-#: ../../share/advertising/02-community.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
-msgstr ""
-"هل ŰȘŰ±ÙŠŰŻ مŰčŰ±ÙŰ© Ű§Ù„Ù…ŰČÙŠŰŻ Űčن Ù…ŰŹŰȘمŰč Ű§Ù„Ù…Ű”Ű§ŰŻŰ± Ű§Ù„Ù…ÙŰȘÙˆŰ­Ű©ŰŸ كن ŰŹŰČŰĄŰ§Ù‹ من ŰčŰ§Ù„Ù… Ű§Ù„ŰšŰ±Ù…ŰŹÙŠŰ§ŰȘ "
-"Ű§Ù„Ű­Ű±Ű©"
+msgid "Please check for multisession CD"
+msgstr "ÙŰ¶Ù„Ű§ قم ŰšŰ§Ù„ŰȘŰŁŰŽÙŠŰ± Ù‡Ù†Ű§ ۧ۰ۧ كنŰȘ ŰȘŰłŰȘŰźŰŻÙ… Ù‚Ű±Ű” Ù…ŰŻÙ…ŰŹ مŰȘŰčŰŻŰŻ Ű§Ù„ŰŹÙ„ŰłŰ§ŰȘ"
-#: ../../share/advertising/02-community.pl:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Build the future of Linux!"
-msgstr ""
+msgid "user"
+msgstr "Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ…"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
-msgstr ""
-"Mandrake Linux 9.1 يمكّنك من ۧ۳ŰȘŰźŰŻŰ§Ù… ۹۟۱ ۧ۔ۯۧ۱ۧŰȘ Ű§Ù„ŰšŰ±Ű§Ù…ŰŹ لŰȘŰŽŰșيل Ű§Ù„Ù…Ù„ÙŰ§ŰȘ "
-"Ű§Ù„Ű”ÙˆŰȘÙŠŰ©, و ŰȘŰ­Ű±ÙŠŰ± Ű§Ù„Ű”ÙˆŰ±, و ŰȘŰŽŰșيل Ù…Ù„ÙŰ§ŰȘ Ű§Ù„ÙÙŠŰŻÙŠÙˆ"
+msgid "Use Hard Disk to backup"
+msgstr "ۧ۳ŰȘŰźŰŻÙ… Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš Ù„Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠ"
-#: ../../share/advertising/03-software.pl:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
-msgstr ""
+msgid "Configure"
+msgstr "Ű„Űčۯۧۯ"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr ""
+msgid "Scannerdrake"
+msgstr "Scannerdrake"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
-
-#: ../../share/advertising/04-configuration.pl:1
-#, fuzzy, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "ŰȘÙ‡ÙŠŰŠŰ© ŰźŰ§ŰŻÙ… Ű·Ű±ÙÙŠŰ§ŰȘ Mandrake"
-
-#: ../../share/advertising/05-desktop.pl:1
-#, fuzzy, c-format
-msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
-msgstr ""
-"ÙŠÙˆÙŰ± Mandrake Linux 9.1 11 ÙˆŰ§ŰŹÙ‡Ű© ۧ۳ŰȘŰźŰŻŰ§Ù… يمكن ŰȘŰčŰŻÙŠÙ„Ù‡Ű§ ÙƒŰ§Ù…Ù„Ű©Ù‹: ÙƒÙŠŰŻÙŠ 3, ŰŹÙ†ÙˆÙ… 2, "
-"WindowsMaker, ..."
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
+msgstr "ŰȘŰ­Ű°ÙŠŰ±, ŰȘم Ű§ÙŠŰŹŰ§ŰŻ ۧŰȘŰ”Ű§Ù„ Ű„Ù†ŰȘŰ±Ù†ŰȘ ۹۟۱, Ű±ŰšÙ…Ű§ يكون ÙŠŰłŰȘŰźŰŻÙ… ŰŽŰšÙƒŰȘك"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A customizable environment"
-msgstr ""
+msgid "Backup Users"
+msgstr "Ù…ŰłŰȘŰźŰŻÙ…Ùˆ Ű§Ù„Ù…ŰłŰ§ŰčŰŻ"
-#: ../../share/advertising/06-development.pl:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
msgstr ""
+"ÙŰ¶Ù„Ű§Ù‹ ŰŁŰŻŰźÙ„ Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ.\n"
+"ÙŠŰŹŰš ŰŁÙ† يكون Ű§ŰłÙ… Ű§Ù„Ù…ŰłŰȘŰ¶ÙŠÙ Ű”Ű§Ù„Ű­Ű§Ù‹ و ÙƒŰ§Ù…Ù„Ű§Ù‹,\n"
+"Ù…Ű«Ù„ ``mybox.mylab.myco.com''.\n"
+"يمكنك ŰŁÙŠŰ¶Ű§Ù‹ Ű§ŰŻŰźŰ§Ù„ ŰčÙ†ÙˆŰ§Ù† IP Ű§Ù„ŰźŰ§Ű” ŰšŰ§Ù„ŰšÙˆŰ§ŰšŰ© Ű§Ù† ÙˆÙŰŹŰŻŰȘ."
-#: ../../share/advertising/06-development.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr "Mandrake Linux 9.1 هي Ű§Ù„ŰšÙŠŰŠŰ© Ű§Ù„ŰŁÙ…Ű«Ù„ لŰȘŰ·ÙˆÙŠŰ± Ű§Ù„ŰšŰ±Ű§Ù…ŰŹ"
+msgid "Select Printer Spooler"
+msgstr "ۧ۟ŰȘ۱ Printer Spooler"
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
-msgstr ""
-"Ű­ÙˆÙ‘Ù„ ŰŹÙ‡Ű§ŰČك Ű§Ù„Ù‰ ŰźŰ§ŰŻÙ… Ù„ÙŠÙ†ÙƒŰł قوي ŰšÙ†Ù‚Ű±Ű§ŰȘ Ù‚Ù„ÙŠÙ„Ű© من Ű§Ù„ÙŰŁŰ±Ű©: ŰźŰ§ŰŻÙ… ÙˆÙŠŰš, ŰšŰ±ÙŠŰŻ, ۏۯۧ۱ "
-"Ù†Ű§Ű±ÙŠ, Ù…ÙˆŰŹÙ‘Ù‡, ŰźŰ§ŰŻÙ… Ù…Ù„ÙŰ§ŰȘ و ۷ۚۧŰčŰ©, ..."
+msgid "Create new theme"
+msgstr "Ű§Ù†ŰŽŰŠ ŰłÙ…Ű© ŰŹŰŻÙŠŰŻŰ©"
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Turn your computer into a reliable server"
-msgstr "ۧۏŰčل ŰŹÙ‡Ű§ŰČك ŰźŰ§ŰŻÙ…Ű§Ù‹ يŰčŰȘÙ…ŰŻ Űčليه"
+msgid "Mandrake Tools Explanation"
+msgstr "ŰŽŰ±ÙˆŰ­ ŰŁŰŻÙˆŰ§ŰȘ Mandrake"
-#: ../../share/advertising/08-store.pl:1
+#
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
-msgstr ""
-"ŰźÙŠŰ§Ű±Ű§ŰȘÙ†Ű§ Ű§Ù„ÙƒŰ«ÙŠŰ± من Ű­Ù„ÙˆÙ„ Ù†ŰžŰ§Ù… Ù„ÙŠÙ†ÙƒŰł ŰšŰ§Ù„Ű„Ű¶Ű§ÙŰ© Ű§Ù„Ù‰ Ű§Ù„ŰčŰ±ÙˆŰ¶ Ű§Ù„ŰźŰ§Ű”Ű© و Ű§Ù„Ù…Ù†ŰȘۏۧŰȘ "
-"Ű§Ù„ŰŁŰźŰ±Ù‰Ù‰ مŰȘÙˆÙŰ±Ű© في مŰȘŰŹŰ±Ù†Ű§ Ű§Ù„ŰŁÙ„ÙƒŰȘŰ±ÙˆÙ†ÙŠ:"
+msgid "No image found"
+msgstr "ŰȘŰč۰۱ Ű§ÙŠŰŹŰ§ŰŻ Ű”ÙˆŰ±Ű©"
-#: ../../share/advertising/08-store.pl:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "The official MandrakeSoft Store"
-msgstr "مŰȘۏ۱ MandrakeSoft Ű§Ù„Ű±ŰłÙ…ÙŠ"
-
-#: ../../share/advertising/09-mdksecure.pl:1
-#, fuzzy, c-format
msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
msgstr ""
-"MandrakeSoft ŰȘŰčمل ŰŹÙ†ŰšŰ§Ù‹ Ű§Ù„Ù‰ ŰŹÙ†Űš مŰč ŰŁÙŰ¶Ù„ Ű§Ù„ŰŽŰ±ÙƒŰ§ŰȘ Ű§Ù„ŰȘي ŰȘÙˆÙŰ± Ű­Ù„ÙˆÙ„ Ù„Ű­ŰȘŰ±Ű§ÙÙŠŰ© "
-"مŰȘÙˆŰ§ÙÙ‚Ű© مŰč Mandrake Linux. ŰȘÙˆŰŹŰŻ Ù‚Ű§ŰŠÙ…Ű© ŰšÙ‡Ű€Ù„Ű§ŰĄ Ű§Ù„ŰŽŰ±ÙƒŰ§ŰĄ في MandrakeStore"
+"لم يŰȘم ŰȘŰ«ŰšÙŠŰȘ ŰšŰč۶ Ű§Ù„Ű­ŰČم Ű§Ù„Ù…Ù‡Ù…Ű© ŰšŰŽÙ„ Ű”Ű­ÙŠŰ­.\n"
+"Ű„Ù…Ű§ ŰŁÙ† ŰłÙˆŰ§Ù‚Ű© Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹ ŰŁÙˆ ŰŁÙ† Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹ Ù†ÙŰłÙ‡ ŰšÙ‡ ŰčÙŠŰš Ù…Ű§.\n"
+"ŰȘŰŁÙƒŰŻ من ۔ۭ۩ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ù…ŰŻÙ…ŰŹ Űčلى ÙƒÙ…ŰšÙŠÙˆŰȘ۱ Ù…Ű«ŰšÙ‘ŰȘ ۚۧ۳ŰȘŰźŰŻŰ§Ù… Ű§Ù„ŰŁÙ…Ű± \"rpm -qpl Mandrake/"
+"RPMS/*.rpm\"\n"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
-msgstr ""
+msgid "Detected model: %s"
+msgstr "ŰȘم Ű§ÙƒŰȘŰŽŰ§Ù Ű§Ù„Ű·Ű±Ű§ŰČ: %s"
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakedm:1
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
+"Ù…ŰŻÙŠŰ± Űč۱۶ X11 ÙŠŰłÙ…Ű­ لك ŰšŰȘŰłŰŹÙŠÙ„ Ű§Ù„ŰŻŰźÙˆÙ„ Ű§Ù„Ù‰\n"
+"Ù†ŰžŰ§Ù…Ùƒ مŰč ŰȘŰŽŰșيل ŰźŰ§ŰŻÙ… Ű§Ù„Ù†ÙˆŰ§ÙŰ° X و ÙŠŰŻŰčم ŰȘŰŽŰșيل\n"
+"ŰčŰŻŰ© ŰŹÙ„ŰłŰ§ŰȘ X Ù…ŰźŰȘÙ„ÙŰ© Űčلى Ù…Ű§ÙƒÙŠÙ†ŰȘك Ű§Ù„Ù…Ű­Ù„ÙŠŰ© في Ù†ÙŰł Ű§Ù„ÙˆÙ‚ŰȘ."
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Optimize your security by using Mandrake Linux"
-msgstr "Ű­ŰłÙ‘Ù† Ù…ŰłŰȘوى Ű§Ù„ŰŁÙ…Ù†"
+msgid "if set to yes, run the daily security checks."
+msgstr "if set to yes, run the daily security checks"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr "Ù‡Ű°Ű§ Ű§Ù„Ù…Ù†ŰȘŰŹ مŰȘÙˆÙŰ± Űčلى موقŰč MandrakeStore"
+msgid "Azerbaijan"
+msgstr "ŰŁŰ°Ű±ŰšÙŠŰŹŰ§Ù†"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
-msgstr ""
+msgid "No tape in %s!"
+msgstr "Ù„Ű§ ÙŠÙˆŰŹŰŻ ŰŽŰ±ÙŠŰ· في %s!"
-#: ../../share/advertising/11-mnf.pl:1
+# U+200F (RTL mark) has been inserted between "Dvorak" and "(US)", so
+# it displays on screen as "(US) Dvorak", following the same schema
+# as others "Dvorak (xxxx)" with xxx in Arabic that display as "(xxxx) Dvorak"
+# that way the entry is also listed together with the other "Dvorak" entries.
+#: ../../keyboard.pm:1
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr ""
+msgid "Dvorak (US)"
+msgstr "Dvorak‏ (US)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""
-"Ű§Ù„ŰȘŰ­Ù‚ ŰšÙŰ±ÙŠÙ‚ Ű§Ù„ŰŻŰčم Ű§Ù„ÙÙ†ÙŠ في MandrakeSoft و Ù…ŰŹŰȘمŰč Ù„ÙŠÙ†ÙƒŰł Űčلى Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ Ù„Ù…ŰŽŰ§Ű±ÙƒŰ© "
-"مŰčÙ„ÙˆÙ…Ű§ŰȘك و Ù…ŰłŰ§ŰčŰŻŰ© Ű§Ù„ŰąŰźŰ±ÙŠÙ† ŰšŰŁÙ† ŰȘ۔ۭۚ ŰźŰšÙŠŰ±Ű§Ù‹ مŰčŰȘÙ…ÙŽŰŻŰ§Ù‹ في موقŰčÙ†Ű§ Ù„Ù„ŰŻŰčم Ű§Ù„ÙÙ†ÙŠ Űčلى "
-"Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr ""
-"ۧŰč۫۱ Űčلى Ű­Ù„ÙˆÙ„ Ù„Ù…ŰŽŰ§ÙƒÙ„Ùƒ ۚۧ۳ŰȘŰźŰŻŰ§Ù… ŰšÙŠŰŠŰ© Ű§Ù„ŰŻŰčم Ű§Ù„ÙÙ†ÙŠ Űčلى Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ في MandrakeSoft"
+msgid "How is the printer connected?"
+msgstr "Ù…Ű§ هي Ű·Ű±ÙŠÙ‚Ű© ŰȘÙˆŰ”ÙŠÙ„ Ű§Ù„Ű·Ű§ŰšŰčŰ©ŰŸ"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Become a MandrakeExpert"
-msgstr "كن ŰźŰšÙŠŰ±Ű§Ù‹ في MandrakeExpert"
+msgid "Security level"
+msgstr "Ù…ŰłŰȘوى Ű§Ù„ŰŁÙ…Ù†"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr "كل Ù…ŰŽÙƒÙ„Ű© ŰłÙŠŰȘم ŰȘŰȘŰšŰčÙ‡Ű§ من ŰźŰšÙŠŰ± ÙˆŰ§Ű­ŰŻ مŰčŰȘÙ…ŰŻ من MandrakeSoft."
+msgid "final resolution"
+msgstr "ŰŻÙ‚Ű© Ű§Ù„Űč۱۶ Ű§Ù„Ù†Ù‡Ű§ŰŠÙŠŰ©"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr "ŰšÙŠŰŠŰ© Űčلى Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ Ù„Ù„Ű„ŰłŰȘۏۧۚ۩ Ù„Ű§Ű­ŰȘÙŠŰ§ŰŹŰ§ŰȘ Ű§Ù„ŰŻŰčم Ű§Ù„ÙÙ†ÙŠ Ù„Ù„ŰŽŰ±ÙƒŰ§ŰȘ"
+msgid "Services"
+msgstr "Ű§Ù„ŰźŰŻÙ…Ű§ŰȘ"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "MandrakeExpert Ù„Ù„ŰŽŰ±ÙƒŰ§ŰȘ"
+msgid "4 MB"
+msgstr "4 ميŰșŰ§ŰšŰ§ÙŠŰȘ"
#: ../../share/compssUsers:999
msgid "Office Workstation"
@@ -18720,10 +18786,6 @@ msgstr ""
"gnumeric) , ŰšŰ±Ű§Ù…ŰŹ Űč۱۶ pdf, Ű§Ù„Űź"
#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Ù…Ű­Ű·Ű© Űčمل"
-
-#: ../../share/compssUsers:999
msgid "Game station"
msgstr "Ù…Ű­Ű·Ű© ŰŁÙ„Űčۧۚ"
@@ -18795,10 +18857,6 @@ msgstr ""
"ŰšÙŠŰŠŰ© ۳۷ۭ مكŰȘŰš ÙƒÙŠŰŻÙŠ, Ű§Ù„ŰšÙŠŰŠŰ© Ű§Ù„Ű±ŰłÙˆÙ…ÙŠŰ© Ű§Ù„ŰŁŰłŰ§ŰłÙŠŰ© مŰč Ù…ŰŹÙ…ÙˆŰčŰ© من Ű§Ù„ŰŁŰŻÙˆŰ§ŰȘ Ű§Ù„Ù…Ű”Ű§Ű­ŰšŰ©"
#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "ŰšÙŠŰŠŰ§ŰȘ Ű±ŰłÙˆÙ…ÙŠŰ©"
-
-#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Ù…Ű­Ű·Ű© Űčمل ŰŹÙ†ÙˆÙ…"
@@ -18819,10 +18877,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm, Ű§Ù„Űź"
#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "ŰȘŰ·ÙˆÙŠŰ±"
-
-#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "ŰšŰ±Ű§Ù…ŰŹ و مكŰȘۚۧŰȘ ŰȘŰ·ÙˆÙŠŰ± C و C++"
@@ -18892,40 +18946,523 @@ msgstr "ŰźŰ§ŰŻÙ… NFS, ŰźŰ§ŰŻÙ… SMB, ŰźŰ§ŰŻÙ… ŰšŰ±ÙˆÙƒŰłÙŠ, ŰźŰ§ŰŻÙ… ssh"
#: ../../share/compssUsers:999
#, fuzzy
-msgid "Audio station"
-msgstr "Ù…Ű­Ű·Ű© ÙˆŰłŰ§ŰŠŰ· مŰȘŰčŰŻŰŻŰ©"
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr ""
+"Ù…ŰŹÙ…ÙˆŰčŰ© من Ű§Ù„ŰŁŰŻÙˆŰ§ŰȘ Ù„Ù‚Ű±Ű§ŰĄŰ© و Ű§Ű±ŰłŰ§Ù„ Ű§Ù„ŰšŰ±ÙŠŰŻ و Ű§Ù„ŰŁŰźŰšŰ§Ű± (pine, mutt, tin..) و "
+"لŰȘŰ”ÙŰ­ Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ"
+
+#~ msgid "Internet connection & configuration"
+#~ msgstr "ÙˆŰ”Ù„Ű© Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ و Ű§Ù„Ű„ŰčۯۧۯۧŰȘ"
+
+#~ msgid "Configure the connection"
+#~ msgstr "قم ۚۄŰčۯۧۯ Ű§Ù„Ű„ŰȘŰ”Ű§Ù„"
+
+#~ msgid "Disconnect"
+#~ msgstr "Ű§Ù‚Ű·Űč Ű§Ù„Ű„ŰȘŰ”Ű§Ù„"
+
+#~ msgid "Connect"
+#~ msgstr "ۧŰȘŰ”Ù„"
+
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "يمكنك ۧŰčۧۯ۩ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ÙˆŰ”Ù„Ű©."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "يمكنك Ű§Ù„ŰąÙ† Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ ŰŁÙˆ ۧŰčۧۯ۩ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ÙˆŰ”Ù„Ű©."
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "ŰŁÙ†ŰȘ Ù„ŰłŰȘ مŰȘŰ”Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ Ű­Ű§Ù„ÙŠŰ§Ù‹"
+
+#~ msgid ""
+#~ "\n"
+#~ "You can disconnect or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "يمكنك Ù‚Ű·Űč Ű§Ù„Ű„ŰȘŰ”Ű§Ù„ ŰŁÙˆ ۧŰčۧۯ۩ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ÙˆŰ”Ù„Ű©."
+
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "ŰŁÙ†ŰȘ مŰȘŰ”Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ Ű­Ű§Ù„ÙŠŰ§Ù‹"
+
+#~ msgid "files sending by FTP"
+#~ msgstr "Ű§Ű±ŰłŰ§Ù„ Ű§Ù„Ù…Ù„ÙŰ§ŰȘ Űčن Ű·Ű±ÙŠÙ‚ FTP"
+
+#~ msgid "Use incremental backup (do not replace old backups)"
+#~ msgstr "ۧ۳ŰȘŰźŰŻÙ… Ű§Ù„Ù†ŰłŰź Ű§Ù„ŰȘŰ±Ű§ÙƒÙ…ÙŠ (Ù„Ű§ ŰȘŰłŰȘŰšŰŻÙ„ Ű§Ù„Ù†ŰłŰź Ű§Ù„Ű„Ű­ŰȘÙŠŰ§Ű·ÙŠŰ© Ű§Ù„Ù‚ŰŻÙŠÙ…Ű©)"
+
+#~ msgid "Relaunch 'lilo'"
+#~ msgstr "ŰŁŰčŰŻ ŰȘŰŽŰșيل 'lilo'"
+
+#~ msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+#~ msgstr "ۧۏŰčل initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+
+#~ msgid "Write %s"
+#~ msgstr "Ű§ÙƒŰȘŰš %s"
+
+#~ msgid "Copy %s to %s"
+#~ msgstr "Ű§Ù†ŰłŰź %s Ű§Ù„Ù‰ %s"
+
+#~ msgid "Backup %s to %s.old"
+#~ msgstr "Ű§Ù†ŰłŰź %s ۭۧŰȘÙŠŰ§Ű·ÙŠŰ§Ù‹ Ű§Ù„Ù‰ %s.old"
+
+#~ msgid "ttf fonts conversion"
+#~ msgstr "ŰȘŰ­ÙˆÙŠÙ„ ŰźŰ·ÙˆŰ· ttf"
+
+#~ msgid "Fonts conversion"
+#~ msgstr "ŰȘŰ­ÙˆÙŠÙ„ Ű§Ù„ŰźŰ·ÙˆŰ·"
+
+#~ msgid ""
+#~ "Choose the hard drive you want to erase in order to install your new\n"
+#~ "Mandrake Linux partition. Be careful, all data present on it will be "
+#~ "lost\n"
+#~ "and will not be recoverable!"
+#~ msgstr ""
+#~ "ۧ۟ŰȘ۱ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš Ű§Ù„Ű°ÙŠ ŰȘŰ±ÙŠŰŻ Ù…Ű­ÙˆÙ‡ لŰȘŰ«ŰšÙŠŰȘ ŰȘŰŹŰČŰŠŰ©\n"
+#~ "Mandrake Linux Ű§Ù„ŰŹŰŻÙŠŰŻŰ©. ۟۰ Ű­Ű°Ű±Ùƒ, كل Ű§Ù„ŰšÙŠŰ§Ù†Ű§ŰȘ Ű§Ù„Ù…ÙˆŰŹÙˆŰŻ Űčليه ŰłŰȘŰ¶ÙŠŰč\n"
+#~ "و لن يمكن ۧ۳ŰȘŰčۧۯŰȘÙ‡Ű§!"
+
+#~ msgid ""
+#~ "\"Sound card\": if a sound card is detected on your system, it is "
+#~ "displayed\n"
+#~ "here. If you notice the sound card displayed is not the one that is\n"
+#~ "actually present on your system, you can click on the button and choose\n"
+#~ "another driver."
+#~ msgstr ""
+#~ "\"ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű”ÙˆŰȘ\": ۧ۰ۧ ŰȘم Ű§ÙƒŰȘŰŽŰ§Ù ŰšŰ·Ű§Ù‚Ű© Ű”ÙˆŰȘ Űčلى Ù†ŰžŰ§Ù…Ùƒ, ŰłÙŠŰȘم ŰčŰ±Ű¶Ù‡Ű§\n"
+#~ "Ù‡Ù†Ű§. ۧ۰ۧ Ù„Ű§Ű­ŰžŰȘ ŰŁÙ† ŰšŰ·Ű§Ù‚Ű© Ű§Ù„Ű”ÙˆŰȘ Ű§Ù„Ù…ŰčŰ±ÙˆŰ¶Ű© Ù‡Ù†Ű§ Ù„ÙŠŰłŰȘ ŰȘلك Ű§Ù„Ù…ÙˆŰŹÙˆŰŻŰ©\n"
+#~ "فŰčÙ„Ű§Ù‹ Űčلى Ù†ŰžŰ§Ù…Ùƒ, يمكنك Ű§Ù„Ù†Ù‚Ű± Űčلى Ű§Ù„ŰČ۱ و ۧ۟ŰȘÙŠŰ§Ű± Ù…ŰŽŰșل\n"
+#~ "۹۟۱."
+
+#~ msgid ""
+#~ "You can add additional entries in yaboot for other operating systems,\n"
+#~ "alternate kernels, or for an emergency boot image.\n"
+#~ "\n"
+#~ "For other OSs, the entry consists only of a label and the \"root\"\n"
+#~ "partition.\n"
+#~ "\n"
+#~ "For Linux, there are a few possible options:\n"
+#~ "\n"
+#~ " * Label: this is the name you will have to type at the yaboot prompt to\n"
+#~ "select this boot option.\n"
+#~ "\n"
+#~ " * Image: this would be the name of the kernel to boot. Typically, "
+#~ "vmlinux\n"
+#~ "or a variation of vmlinux with an extension.\n"
+#~ "\n"
+#~ " * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+#~ "\n"
+#~ " * Append: on Apple hardware, the kernel append option is often used to\n"
+#~ "assist in initializing video hardware, or to enable keyboard mouse "
+#~ "button\n"
+#~ "emulation for the missing 2nd and 3rd mouse buttons on a stock Apple "
+#~ "mouse.\n"
+#~ "The following are some examples:\n"
+#~ "\n"
+#~ " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+#~ "hda=autotune\n"
+#~ "\n"
+#~ " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+#~ "\n"
+#~ " * Initrd: this option can be used either to load initial modules before\n"
+#~ "the boot device is available, or to load a ramdisk image for an "
+#~ "emergency\n"
+#~ "boot situation.\n"
+#~ "\n"
+#~ " * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If "
+#~ "you\n"
+#~ "need to allocate a large ramdisk, this option can be used to specify a\n"
+#~ "ramdisk larger than the default.\n"
+#~ "\n"
+#~ " * Read-write: normally the \"root\" partition is initially mounted as\n"
+#~ "read-only, to allow a file system check before the system becomes "
+#~ "``live''.\n"
+#~ "You can override the default with this option.\n"
+#~ "\n"
+#~ " * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+#~ "problematic, you can select this option to boot in ``novideo'' mode, "
+#~ "with\n"
+#~ "native frame buffer support.\n"
+#~ "\n"
+#~ " * Default: selects this entry as being the default Linux selection,\n"
+#~ "selectable by pressing ENTER at the yaboot prompt. This entry will also "
+#~ "be\n"
+#~ "highlighted with a ``*'' if you press [Tab] to see the boot selections."
+#~ msgstr ""
+#~ "You can add additional entries in yaboot for other operating systems,\n"
+#~ "alternate kernels, or for an emergency boot image.\n"
+#~ "\n"
+#~ "For other OSs, the entry consists only of a label and the \"root\"\n"
+#~ "partition.\n"
+#~ "\n"
+#~ "For Linux, there are a few possible options:\n"
+#~ "\n"
+#~ " * Label: this is the name you will have to type at the yaboot prompt to\n"
+#~ "select this boot option.\n"
+#~ "\n"
+#~ " * Image: this would be the name of the kernel to boot. Typically, "
+#~ "vmlinux\n"
+#~ "or a variation of vmlinux with an extension.\n"
+#~ "\n"
+#~ " * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+#~ "\n"
+#~ " * Append: on Apple hardware, the kernel append option is often used to\n"
+#~ "assist in initializing video hardware, or to enable keyboard mouse "
+#~ "button\n"
+#~ "emulation for the missing 2nd and 3rd mouse buttons on a stock Apple "
+#~ "mouse.\n"
+#~ "The following are some examples:\n"
+#~ "\n"
+#~ " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+#~ "hda=autotune\n"
+#~ "\n"
+#~ " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+#~ "\n"
+#~ " * Initrd: this option can be used either to load initial modules before\n"
+#~ "the boot device is available, or to load a ramdisk image for an "
+#~ "emergency\n"
+#~ "boot situation.\n"
+#~ "\n"
+#~ " * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If "
+#~ "you\n"
+#~ "need to allocate a large ramdisk, this option can be used to specify a\n"
+#~ "ramdisk larger than the default.\n"
+#~ "\n"
+#~ " * Read-write: normally the \"root\" partition is initially mounted as\n"
+#~ "read-only, to allow a file system check before the system becomes "
+#~ "``live''.\n"
+#~ "You can override the default with this option.\n"
+#~ "\n"
+#~ " * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+#~ "problematic, you can select this option to boot in ``novideo'' mode, "
+#~ "with\n"
+#~ "native frame buffer support.\n"
+#~ "\n"
+#~ " * Default: selects this entry as being the default Linux selection,\n"
+#~ "selectable by pressing ENTER at the yaboot prompt. This entry will also "
+#~ "be\n"
+#~ "highlighted with a ``*'' if you press [Tab] to see the boot selections."
+
+#~ msgid ""
+#~ "DrakX will first detect any IDE devices present in your computer. It "
+#~ "will\n"
+#~ "also scan for one or more PCI SCSI cards on your system. If a SCSI card "
+#~ "is\n"
+#~ "found, DrakX will automatically install the appropriate driver.\n"
+#~ "\n"
+#~ "Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+#~ "your hard drives. If so, You'll have to specify your hardware by hand.\n"
+#~ "\n"
+#~ "If you had to manually specify your PCI SCSI adapter, DrakX will ask if "
+#~ "you\n"
+#~ "want to configure options for it. You should allow DrakX to probe the\n"
+#~ "hardware for the card-specific options which are needed to initialize "
+#~ "the\n"
+#~ "adapter. Most of the time, DrakX will get through this step without any\n"
+#~ "issues.\n"
+#~ "\n"
+#~ "If DrakX is not able to probe for the options to automatically determine\n"
+#~ "which parameters need to be passed to the hardware, you'll need to "
+#~ "manually\n"
+#~ "configure the driver."
+#~ msgstr ""
+#~ "ŰłÙŠÙ‚ÙˆÙ… DrakX ŰŁÙˆ?ً ŰšŰ§Ù„ŰȘŰ­Ù‚Ù‚ من ÙˆŰŹÙˆŰŻ ŰŁŰŹÙ‡ŰČŰ© IDE Űčلى Ù‡Ű°Ű§ Ű§Ù„ÙƒÙ…ŰšÙŠÙˆŰȘ۱. ŰłÙŠÙ‚ÙˆÙ…\n"
+#~ "ŰŁÙŠŰ¶Ű§Ù‹ ŰšŰ§Ù„ŰšŰ­Ű« Űčن ŰšŰ·Ű§Ù‚Ű§ŰȘ PCI SCSI Űčلى Ù†ŰžŰ§Ù…Ùƒ. ۧ۰ۧ ŰȘم Ű§ÙŠŰŹŰ§ŰŻ ŰšŰ·Ű§Ù‚Ű©\n"
+#~ "SCSI,ŰłÙŠÙ‚ÙˆÙ… DrakX ŰšŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ù…ŰŽŰșل Ű§Ù„Ù…Ù†Ű§ŰłŰš ŰŁÙˆŰȘÙˆÙ…Ű§ŰȘÙŠÙƒÙŠŰ§Ù‹.\n"
+#~ "\n"
+#~ "و ?ن ŰčÙ…Ù„ÙŠŰ© Ű§Ù„ŰȘŰ­Ù‚Ù‚ من Ű§Ù„ŰčŰȘۧۯ Ù„ÙŠŰłŰȘ ŰźŰ§Ù„ÙŠŰ© من ۧ?۟۷ۧۥ, ŰłÙŠÙ‚ÙˆÙ… DrakX ŰšŰłŰ€Ű§Ù„Ùƒ ŰčÙ…Ù‘Ű§ "
+#~ "ۧ۰ۧ\n"
+#~ "ÙƒŰ§Ù†ŰȘ Ù„ŰŻÙŠÙƒ ŰšŰ·Ű§Ù‚Ű© PCI SCSI. Ű§Ù„Ù†Ù‚Ű± Űčلى \"نŰčم\" ŰłÙŠŰč۱۶ Ù‚Ű§ŰŠÙ…Ű© ŰšŰšŰ·Ű§Ù‚Ű§ŰȘ SCSI\n"
+#~ "لŰȘŰźŰȘۧ۱ Ù…Ù†Ù‡Ű§. Ű§Ù†Ù‚Ű± \"?\" ۧ۰ۧ كنŰȘ ŰȘŰčلم ŰŁÙ†Ù‡ ? ŰȘÙˆŰŹŰŻ ŰšŰ·Ű§Ù‚Ű§ŰȘ SCSI Űčلى\n"
+#~ "Ù…Ű§ÙƒÙŠÙ†ŰȘك. ۧ۰ۧ لم ŰȘكن مŰȘŰŁÙƒŰŻŰ§Ù‹, يمكنك Ű§Ù„ŰȘŰŁÙƒŰŻ من Ù‚Ű§ŰŠÙ…Ű© Ű§Ù„ŰčŰȘۧۯ Ű§Ù„ŰȘي ŰȘم Ű§ÙŠŰŹŰ§ŰŻÙ‡Ű§\n"
+#~ "Űčلى Ù…Ű§ÙƒÙŠÙ†ŰȘك Űčن Ű·Ű±ÙŠÙ‚ ۧ۟ŰȘÙŠŰ§Ű± \"Űč۱۶ مŰčÙ„ÙˆÙ…Ű§ŰȘ Ű§Ù„ŰčŰȘۧۯ\" و Ù†Ù‚Ű±\n"
+#~ "\"Ű§Ù„ŰȘŰ§Ù„ÙŠ->\". ŰȘŰŁÙƒŰŻ من Ù‚Ű§ŰŠÙ…Ű© Ű§Ù„ŰčŰȘۧۯ Ű«Ù… ۧ۶ŰșŰ· Űčلى ŰČ۱ \"Ű§Ù„ŰȘŰ§Ù„ÙŠ\n"
+#~ "->\" للŰčÙˆŰŻŰ© Ű§Ù„Ù‰ ŰŽŰ€Ű§Ù„ ÙˆŰ§ŰŹÙ‡Ű© SCSI.\n"
+#~ "\n"
+#~ "ۧ۰ۧ ۧ۶۷۱۱ŰȘ Ű§Ù„Ù‰ ŰȘŰ­ŰŻÙŠŰŻ Ù…ÙˆŰ§ŰŠÙ… PCI SCSI ÙŠŰŻÙˆÙŠŰ§Ù‹, ÙŰłÙŠŰłŰŁÙ„Ùƒ DrakX ŰčÙ…Ù‘Ű§ ۧ۰ۧ كنŰȘ\n"
+#~ "ŰȘŰ±ÙŠŰŻ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙ‡Ű§. ÙŠŰŹŰš ŰŁÙ† ŰȘŰłÙ…Ű­ لـ DrakX ŰšŰŁÙ† يŰȘŰ­Ù‚Ù‚ من\n"
+#~ "Ű§Ù„ŰčŰȘۧۯ Ù„Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„ŰźŰ§Ű”Ű© ŰšŰ§Ù„ŰšŰ·Ű§Ù‚Ű© و Ű§Ù„ŰȘي ÙŠÙŒÙŰ­ŰȘۧۏ Ű§Ù„ÙŠÙ‡Ű§ ليŰȘم ۚۯۥ\n"
+#~ "Űčمل Ű§Ù„ŰšŰ·Ű§Ù‚Ű©. في ŰŁŰșÙ„Űš ۧ?ÙˆÙ‚Ű§ŰȘ, ŰłÙŠÙ‚ÙˆÙ… DrakX ŰšŰ§Ù„ŰźŰ·ÙˆŰ© ŰŻÙˆÙ† ŰŁÙŠ\n"
+#~ "Ù…ŰŽŰ§ÙƒÙ„.\n"
+#~ "\n"
+#~ "ۧ۰ۧ لم يŰȘمكن DrakX من Ű§Ù„ŰȘŰčŰ±Ù Űčلى Ű§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„Ű¶Ű±ÙˆŰ±ÙŠŰ©Ù„ŰȘÙ…Ű±ÙŠŰ±Ù‡Ű§\n"
+#~ "Ű§Ù„Ù‰ Ű§Ù„ŰčŰȘۧۯ, ففي Ù‡Ű°Ù‡ Ű§Ù„Ű­Ű§Ù„ ŰłŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ ŰȘÙ‡ÙŠŰŠŰ©\n"
+#~ "Ű§Ù„Ù…ŰŽŰșّل ÙŠŰŻÙˆÙŠŰ§Ù‹."
+
+#~ msgid ""
+#~ "After you have configured the general bootloader parameters, the list of\n"
+#~ "boot options that will be available at boot time will be displayed.\n"
+#~ "\n"
+#~ "If there are other operating systems installed on your machine they will\n"
+#~ "automatically be added to the boot menu. You can fine-tune the existing\n"
+#~ "options by clicking \"Add\" to create a new entry; selecting an entry "
+#~ "and\n"
+#~ "clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" "
+#~ "validates\n"
+#~ "your changes.\n"
+#~ "\n"
+#~ "You may also not want to give access to these other operating systems to\n"
+#~ "anyone who goes to the console and reboots the machine. You can delete "
+#~ "the\n"
+#~ "corresponding entries for the operating systems to remove them from the\n"
+#~ "bootloader menu, but you will need a boot disk in order to boot those "
+#~ "other\n"
+#~ "operating systems!"
+#~ msgstr ""
+#~ "ŰšŰčŰŻÙ…Ű§ قمŰȘ ŰšŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„Ù…ŰčŰ§Ù…?ŰȘ Ű§Ù„ŰčŰ§Ù…Ű© Ù„Ù…Ű­Ù…Ù‘Ù„ ۧ?Ù‚Ù„Ű§Űč, ÙŰłÙŠŰȘم\n"
+#~ "Űč۱۶ Ù‚Ű§ŰŠÙ…Ű© ŰźÙŠŰ§Ű±Ű§ŰȘ ۧ?Ù‚Ù„Ű§Űč Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű© ŰčÙ†ŰŻ ۚۯۥ Ű§Ù„ŰȘŰŽŰșيل.\n"
+#~ "\n"
+#~ "ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ù‡Ù†Ű§Ùƒ ŰŁÙ†ŰžÙ…Ű© ŰȘŰŽŰșيل ŰŁŰźŰ±Ù‰ Ù…Ű«ŰšŰȘŰ© Űčلى Ù…Ű§ÙƒÙŠÙ†ŰȘك ÙŰłÙŠŰȘم Ű§Ű¶Ű§ÙŰȘÙ‡Ű§\n"
+#~ "ŰąÙ„ÙŠŰ§Ù‹ Ű§Ù„Ù‰ Ù‚Ű§ŰŠÙ…Ű© ۧ?Ù‚Ù„Ű§Űč. يمكنك Ű§Ù„ŰȘŰ­ÙƒÙ… ŰšŰ§Ù„ŰźÙŠŰ§Ű±Ű§ŰȘ\n"
+#~ "Ű§Ù„Ù…ÙˆŰŹÙˆŰŻŰ© ŰšÙ†Ù‚Ű± \"Ű§Ű¶Ù\" ?Ù†ŰŽŰ§ŰĄ Ù…ŰŻŰźÙ„ ŰŹŰŻÙŠŰŻ, و ۧ۟ŰȘÙŠŰ§Ű± Ù…ŰŻŰźÙ„ و\n"
+#~ "Ù†Ù‚Ű± \"ŰȘŰčŰŻÙŠÙ„\" ŰŁÙˆ \"Ű­Ű°Ù\" لŰȘŰčŰŻÙŠÙ„ ŰŁÙˆ Ű­Ű°Ù Ű§Ù„Ù…ŰŻŰźÙ„. \"Ù…ÙˆŰ§ÙÙ‚\" يŰȘŰŁÙƒŰŻ\n"
+#~ "من ŰȘŰșÙŠÙŠŰ±Ű§ŰȘك.\n"
+#~ "\n"
+#~ "Ű±ŰšÙ…Ű§ ? ŰȘŰ±ÙŠŰŻ ?ي ێ۟۔ يŰȘمكن من ۧŰčۧۯ۩ ŰȘŰŽŰșيل Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű© ŰŁÙ† ÙŠŰłŰȘŰ·ÙŠŰč\n"
+#~ "Ű§Ù„ÙˆŰ”Ù„ Ű§Ù„Ù‰ ŰŁÙ†ŰžÙ…Ű© Ű§Ù„ŰȘŰŽŰșيل ۧ?ŰźŰ±Ù‰. يمكنك Ű­Ű°Ù Ű§Ù„Ù…ŰŻŰ§ŰźÙ„ Ű§Ù„Ù…Ù‚Ű§ŰšÙ„Ű©\n"
+#~ "?Ù†ŰžÙ…Ű© Ű§Ù„ŰȘŰŽŰșيل Ù„Ű­Ű°ÙÙ‡Ű§ من Ù‚Ű§ŰŠÙ…Ű© Ù…Ű­Ù…Ù‘Ù„ ۧ?Ù‚Ù„Ű§Űč, لكن في Ù‡Ű°Ù‡ Ű§Ù„Ű­Ű§Ù„Ű© ŰłŰȘŰ­ŰȘۧۏ Ű§Ù„Ù‰ "
+#~ "Ù‚Ű±Ű”\n"
+#~ "Ù…Ű±Ù† Ù„Ù„Ű„Ù‚?Űč كي ŰȘŰȘمكن من Ű§Ù„ÙˆŰ”ÙˆÙ„ Ű§Ù„Ù‰ ŰŁÙ†ŰžÙ…Ű©\n"
+#~ "Ű§Ù„ŰȘŰŽŰșيل ۧ?ŰźŰ±Ù‰!"
+
+#~ msgid ""
+#~ "Depending on the default language you chose in Section , DrakX will\n"
+#~ "automatically select a particular type of keyboard configuration. "
+#~ "However,\n"
+#~ "you might not have a keyboard that corresponds exactly to your language:\n"
+#~ "for example, if you are an English speaking Swiss person, you may have a\n"
+#~ "Swiss keyboard. Or if you speak English but are located in Quebec, you "
+#~ "may\n"
+#~ "find yourself in the same situation where your native language and "
+#~ "keyboard\n"
+#~ "do not match. In either case, this installation step will allow you to\n"
+#~ "select an appropriate keyboard from a list.\n"
+#~ "\n"
+#~ "Click on the \"More \" button to be presented with the complete list of\n"
+#~ "supported keyboards.\n"
+#~ "\n"
+#~ "If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+#~ "dialog will allow you to choose the key binding that will switch the\n"
+#~ "keyboard between the Latin and non-Latin layouts."
+#~ msgstr ""
+#~ "ۧŰčŰȘÙ…Ű§ŰŻŰ§Ù‹ Űčلى Ű§Ù„Ù„ŰșŰ© ۧ?فŰȘŰ±Ű§Ű¶ÙŠŰ© Ű§Ù„ŰȘي ۧ۟ŰȘ۱ŰȘÙ‡Ű§ في Ù‡Ű°Ű§ Ű§Ù„Ù‚ŰłÙ…, ŰłÙŠÙ‚ÙˆÙ… DrakX\n"
+#~ "ۚۧ۟ŰȘÙŠŰ§Ű± ŰȘÙ‡ÙŠŰŠŰ© Ù„ÙˆŰ­Ű© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­ ŰąÙ„ÙŠŰ§Ù‹. ŰčÙ…ÙˆÙ…Ű§Ù‹,\n"
+#~ "Ű±ŰšÙ…Ű§ Ù„ÙŠŰłŰȘ Ù„ŰŻÙŠÙƒ Ù„ÙˆŰ­Ű© Ù…ÙŰ§ŰȘÙŠŰ­ Ù…Ù‚Ű§ŰšÙ„Ű© ŰšŰŽÙƒÙ„ Ù…ŰšŰ§ŰŽŰ± للŰșŰȘك:\n"
+#~ "Ù…Ű«Ù„Ű§Ù‹ Ű±ŰšÙ…Ű§ ŰȘكون ŰčŰ±ŰšÙŠŰ§Ù‹ مŰȘÙƒÙ„Ù…Ű§Ù‹ ŰšŰ§Ù„Ù„ŰșŰ© ۧ?Ù†ŰŹÙ„ÙŠŰČÙŠŰ©, Ű±ŰšÙ…Ű§ ŰȘكون Ù„ŰŻÙŠÙƒ\n"
+#~ "Ù„ÙˆŰ­Ű© Ù…ÙŰ§ŰȘÙŠŰ­ ŰłÙˆÙŠŰłŰ±ÙŠŰ©. ۧ۰ۧ كنŰȘ ŰȘŰȘكلم ۧ?Ù†ŰŹÙ„ÙŠŰČÙŠŰ© لكن Ù…ÙˆŰŹÙˆŰŻ في ÙƒÙŠŰšÙƒ, Ű±ŰšÙ…Ű§\n"
+#~ "ŰȘŰŹŰŻ Ù†ÙŰłÙƒ في Ù†ÙŰł Ű§Ù„Ù…ÙˆÙ‚Ù Ű­ÙŠŰ« ? ŰȘŰȘŰ·Ű§ŰšÙ‚ لŰșŰȘك مŰč Ù„ÙˆŰ­Ű© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­.\n"
+#~ "في Ű§Ù„Ű­Ű§Ù„ŰȘين, ŰłŰȘŰłÙ…Ű­ لك ŰźŰ·ÙˆŰ© Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ ŰłŰȘŰłÙ…Ű­ لك ۚۧ۟ŰȘÙŠŰ§Ű±\n"
+#~ "Ù„ÙˆŰ­Ű© Ù…ÙŰ§ŰȘÙŠŰ­ Ù…Ù†Ű§ŰłŰšŰ© من Ű§Ù„Ù‚Ű§ŰŠÙ…Ű©.\n"
+#~ "\n"
+#~ "Ű§Ù†Ù‚Ű± ŰČ۱ \"Ű§Ù„Ù…ŰČÙŠŰŻ\" لŰč۱۶ Ù‚Ű§ŰŠÙ…Ű© ŰšÙƒÙ„ Ù„ÙˆŰ­Ű§ŰȘ Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­\n"
+#~ "Ű§Ù„Ù…ŰŻŰčÙˆÙ…Ű©.\n"
+#~ "\n"
+#~ "ۧ۰ۧ ۧ۟ŰȘ۱ŰȘ Ù„ÙˆŰ­Ű© Ù…ÙŰ§ŰȘÙŠŰ­ Ù„Ű­Ű±ÙˆÙ ŰșÙŠŰ± ?ŰȘÙŠÙ†ÙŠŰ©, ÙŰłÙŠŰłÙ…Ű­ لك\n"
+#~ "Ù…Ű±ŰšŰč Ű§Ù„Ű­ÙˆŰ§Ű± Ű§Ù„ŰȘŰ§Ù„ÙŠ ۚۧ۟ŰȘÙŠŰ§Ű± ۧ۟ŰȘ۔ۧ۱ۧŰȘ Ù„ÙˆŰ­Ű© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­ Ű§Ù„ŰȘي\n"
+#~ "ŰłŰȘŰșÙŠŰ± ÙˆŰ¶Űč Ù„ÙˆŰ­Ű© Ű§Ù„Ù…ÙŰ§ŰȘÙŠŰ­ ŰšÙŠÙ† Ű§Ù„Ű­Ű±ÙˆÙ Ű§Ù„Ù„Ű§ŰȘÙŠÙ†ÙŠŰ© و Ű§Ù„ŰșÙŠŰ± ?ŰȘÙŠÙ†ÙŠŰ©."
+
+#~ msgid ""
+#~ "This step is activated only if an old GNU/Linux partition has been found "
+#~ "on\n"
+#~ "your machine.\n"
+#~ "\n"
+#~ "DrakX now needs to know if you want to perform a new install or an "
+#~ "upgrade\n"
+#~ "of an existing Mandrake Linux system:\n"
+#~ "\n"
+#~ " * \"Install\": For the most part, this completely wipes out the old\n"
+#~ "system. If you wish to change how your hard drives are partitioned, or\n"
+#~ "change the file system, you should use this option. However, depending "
+#~ "on\n"
+#~ "your partitioning scheme, you can prevent some of your existing data "
+#~ "from\n"
+#~ "being over- written.\n"
+#~ "\n"
+#~ " * \"Upgrade\": this installation class allows you to update the "
+#~ "packages\n"
+#~ "currently installed on your Mandrake Linux system. Your current\n"
+#~ "partitioning scheme and user data is not altered. Most of other\n"
+#~ "configuration steps remain available, similar to a standard "
+#~ "installation.\n"
+#~ "\n"
+#~ "Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+#~ "running version \"8.1\" or later. Performing an Upgrade on versions "
+#~ "prior\n"
+#~ "to Mandrake Linux version \"8.1\" is not recommended."
+#~ msgstr ""
+#~ "يŰȘم ŰȘÙ†ŰŽÙŠŰ· Ù‡Ű°Ù‡ Ű§Ù„ŰźŰ·ÙˆŰ© ÙÙ‚Ű· ۧ۰ۧ ŰȘم Ű§ÙŠŰŹŰ§ŰŻ ŰȘŰŹŰČŰŠŰ© Ù„ÙŠÙ†ÙƒŰł Ù‚ŰŻÙŠÙ…Ű©\n"
+#~ "Űčلى ŰŹÙ‡Ű§ŰČك.\n"
+#~ "\n"
+#~ "ÙŠŰ­ŰȘۧۏ DrakX ۧ?ن Ű§Ù„Ù‰ ŰŁÙ† يŰčلم ۧ۰ۧ كنŰȘ ŰȘŰ±ÙŠŰŻ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ من Ű§Ù„Ű”ÙŰ± ŰŁÙˆ\n"
+#~ "ŰȘŰ±ÙŠŰŻ ŰȘŰ±Ù‚ÙŠŰ© Ù†ŰžŰ§Ù… Mandrake Linux Ű§Ù„Ù…ÙˆŰŹÙˆŰŻ Ù„ŰŻÙŠÙƒ Ù…ŰłŰšÙ‚Ű§Ù‹:\n"
+#~ "\n"
+#~ " * \"ŰȘŰ«ŰšÙŠŰȘ\": في ۧ?ŰșÙ„Űš ŰȘقوم ۚۧŰČŰ§Ù„Ű© Ű§Ù„Ù†ŰžŰ§Ù… Ű§Ù„Ù‚ŰŻÙŠÙ…\n"
+#~ "ÙƒÙ„ÙŠŰ§Ù‹. ۧ۰ۧ كنŰȘ ŰȘŰ±ÙŠŰŻ ŰȘŰșÙŠÙŠŰ± ŰȘŰŹŰČۊۧŰȘ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš, ŰŁÙˆ ŰȘŰ±ÙŠŰŻ\n"
+#~ "ŰȘŰșÙŠÙŠŰ± Ù†ŰžŰ§Ù… Ű§Ù„Ù…Ù„ÙŰ§ŰȘ, Űčليك ۧ۟ŰȘÙŠŰ§Ű± Ù‡Ű°Ű§ Ű§Ù„ŰźÙŠŰ§Ű±. ŰčÙ…ÙˆÙ…Ű§Ù‹ ۧŰčŰȘÙ…Ű§ŰŻŰ§\n"
+#~ "Űčلى ÙƒÙŠÙÙŠŰ© ŰȘŰŹŰČŰŠŰ© Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš Ù„ŰŻÙŠÙƒ. يمكنك منŰč ۧŰČŰ§Ù„Ű© ŰšŰč۶\n"
+#~ "ŰšÙŠŰ§Ù†Ű§ŰȘك Ű§Ù„Ù…ÙˆŰŹÙˆŰŻŰ© Ù…ŰłŰšÙ‚Ű§Ù‹.\n"
+#~ " * \"ŰȘŰ±Ù‚ÙŠŰ©\": ÙŰŠŰ© Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ Ù‡Ű°Ù‡ ŰȘŰłÙ…Ű­ لك ŰšŰȘŰ­ŰŻÙŠŰ« Ű§Ù„Ű­ŰČم\n"
+#~ "Űčلى Ù†ŰžŰ§Ù… Mandrake Linux Ű§Ù„ŰźŰ§Ű” ŰšÙƒ. لن يŰȘم ŰȘŰșÙŠÙŠŰ±\n"
+#~ "ŰšÙŠŰ§Ù†Ű§ŰȘك ŰŁÙˆ ŰȘÙ‚ŰłÙŠÙ…Ű§ŰȘ Ű§Ù„Ù‚Ű±Ű” Ű§Ù„Ű”Ù„Űš. ŰŁŰșÙ„Űš ŰźŰ·ÙˆŰ§ŰȘ Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ© ۧ?ŰźŰ±Ù‰\n"
+#~ "Ù„Ű§ ŰȘŰČŰ§Ù„ Ù…ÙˆŰŹÙˆŰŻŰ©, Ù…Ű«Ù„ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ű§ŰčŰȘÙŠŰ§ŰŻÙŠ.\n"
+#~ "\n"
+#~ "ۧ۳ŰȘŰźŰŻŰ§Ù… ŰźÙŠŰ§Ű± ``Ű§Ù„ŰȘŰ±Ù‚ÙŠŰ©'' ÙŠŰŹŰš ŰŁÙ† يŰčمل ŰšŰŽÙƒÙ„ ŰŹÙŠŰŻ Űčلى\n"
+#~ "ۧ۔ۯۧ۱ۧŰȘ Mandrake Linux \"8.1\" ŰŁÙˆ Ù…Ű§ فوق. ? ÙŠÙ†Ű”Ű­ ŰšŰ§Ù„ŰȘŰ±Ù‚ÙŠŰ©\n"
+#~ "من ۧ۔ۧۯ۱ۧŰȘ Mandrake Linux Ù‚ŰšÙ„ \"8.1\"."
+
+#~ msgid ""
+#~ "At this point, DrakX will allow you to choose the security level desired\n"
+#~ "for the machine. As a rule of thumb, the security level should be set\n"
+#~ "higher if the machine will contain crucial data, or if it will be a "
+#~ "machine\n"
+#~ "directly exposed to the Internet. The trade-off of a higher security "
+#~ "level\n"
+#~ "is generally obtained at the expense of ease of use.\n"
+#~ "\n"
+#~ "If you do not know what to choose, keep the default option."
+#~ msgstr ""
+#~ "ŰčÙ†ŰŻ Ù‡Ű°Ù‡ Ű§Ù„Ù†Ù‚Ű·Ű©, ŰłÙŠŰłÙ…Ű­ لك DrakX ۚۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„Ù…ŰłŰȘوى Ű§Ù„ŰŁÙ…Ù†ÙŠ Ű§Ù„Ű°ÙŠ ŰȘ۱ŰșŰš ŰšÙ‡\n"
+#~ "Ù„Ù‡Ű°Ù‡ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű©. ŰšŰŻÙŠÙ‡ÙŠŰ§Ù‹, ÙŠŰŹŰš ŰȘŰčيين Ù…ŰłŰȘوى ŰŁÙ…Ù†ÙŠ\n"
+#~ "ŰčŰ§Ù„Ù ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű© ŰȘŰ­ŰȘوي Űčلى مŰčÙ„ÙˆÙ…Ű§ŰȘ Ù‡Ű§Ù…Ű©, ŰŁÙˆ ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű©\n"
+#~ "ŰłŰȘÙŰłŰȘŰźŰŻÙ… Ù„Ù„Ű„ŰȘŰ”Ű§Ù„ ŰšŰ§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ. Ű§Ù† ۧ۳ŰȘŰźŰŻŰ§Ù… Ù…ŰłŰȘوى ŰŁÙ…Ù†ÙŠ ŰčŰ§Ù„Ù ÙŠŰŁŰȘي\n"
+#~ "Űčۧۯ۩ Űčلى ۭ۳ۧۚ ŰłÙ‡ÙˆÙ„Ű© Ű§Ù„Ű„ŰłŰȘŰźŰŻŰ§Ù….\n"
+#~ "\n"
+#~ "ۧ۰ۧ لم ŰȘكن ŰȘŰ±ÙŠŰŻ Ű§Ù„Ű„ŰźŰȘÙŠŰ§Ű±, Ű§Ű­ÙŰž Ű§Ù„Ű§ŰźŰȘÙŠŰ§Ű± Ű§Ù„Ű„ÙŰȘŰ±Ű§Ű¶ÙŠ."
+
+#~ msgid ""
+#~ "Monitor\n"
+#~ "\n"
+#~ " The installer can normally automatically detect and configure the\n"
+#~ "monitor connected to your machine. If it is not the case, you can choose "
+#~ "in\n"
+#~ "this list the monitor you actually own."
+#~ msgstr ""
+#~ "Ű§Ù„ŰŽŰ§ŰŽŰ©\n"
+#~ "\n"
+#~ " يمكن Ù„ŰšŰ±Ù†Ű§Ù…ŰŹ Ű§Ù„ŰȘŰ«ŰšÙŠŰȘ Ű§ÙƒŰȘŰŽŰ§Ù و ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰŽŰ§ŰŽŰ© Ű§Ù„Ù…ŰȘŰ”Ù„Ű© ŰšÙ…Ű§ÙƒÙŠÙ†ŰȘك\n"
+#~ "ŰąÙ„ÙŠŰ§Ù‹. Ű§Ù† لم ÙŠŰ”Ù„ Ű°Ù„Ùƒ, يمكنك ۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„ŰŽŰ§ŰŽŰ© Ű§Ù„ŰȘي Ù„ŰŻÙŠÙƒ\n"
+#~ "من Ű§Ù„Ù‚Ű§ŰŠÙ…Ű©."
+
+#~ msgid ""
+#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+#~ "local time according to the time zone you selected. If the clock on your\n"
+#~ "motherboard is set to local time, you may deactivate this by unselecting\n"
+#~ "\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
+#~ "system clock and the hardware clock are in the same timezone. This is\n"
+#~ "useful when the machine also hosts another operating system like "
+#~ "Windows.\n"
+#~ "\n"
+#~ "The \"Automatic time synchronization \" option will automatically "
+#~ "regulate\n"
+#~ "the clock by connecting to a remote time server on the Internet. For "
+#~ "this\n"
+#~ "feature to work, you must have a working Internet connection. It is best "
+#~ "to\n"
+#~ "choose a time server located near you. This option actually installs a "
+#~ "time\n"
+#~ "server that can used by other machines on your local network."
+#~ msgstr ""
+#~ "يقوم Ù„ÙŠÙ†ÙƒŰł ۚۄۯۧ۱۩ Ű§Ù„ÙˆÙ‚ŰȘ ۭ۳ۚ ŰȘوقيŰȘ ŰșŰ±ÙŠÙ†ŰȘŰŽ Ű«Ù… يŰȘŰ±ŰŹÙ…Ù‡ Ű§Ù„Ù‰\n"
+#~ "Ű§Ù„ŰȘوقيŰȘ Ű§Ù„Ù…Ű­Ù„ÙŠ ۭ۳ۚ Ű§Ù„Ù…Ù†Ű·Ù‚Ű© Ű§Ù„ŰČÙ…Ù†ÙŠŰ© Ű§Ù„ŰȘي ۧ۟ŰȘ۱ŰȘÙ‡Ű§. ۧ۰ۧ ÙƒŰ§Ù†ŰȘ Ű§Ù„ŰłŰ§ŰčŰ©\n"
+#~ "Ű§Ù„ŰȘي في Ű§Ù„Ù„ÙˆŰ­Ű© Ű§Ù„Ű±ŰŠÙŠŰłÙŠŰ© Ù…Ű¶ŰšÙˆŰ·Ű© Űčلى Ű§Ù„ŰȘوقيŰȘ Ű§Ù„Ù…Ű­Ù„ÙŠ, يمكنك ۧŰČŰ§Ù„Ű© ŰȘÙ†ŰŽÙŠŰ· Ű°Ù„Ùƒ\n"
+#~ "Űčن Ű·Ű±ÙŠÙ‚ ۧŰČŰ§Ù„Ű© Ű§Ù„ŰȘŰŁŰŽÙŠŰ± من \"۳ۧŰčŰ© Ű§Ù„ŰŹÙ‡Ű§ŰČ Ù…Ű¶ŰšÙˆŰžŰ© Űčلى ŰȘوقيŰȘ ŰșŰ±ÙŠÙ†ŰȘŰŽ\" و Ű§Ù„ŰȘي "
+#~ "ŰłŰȘŰŹŰčل\n"
+#~ "Ù„ÙŠÙ†ÙƒŰł يŰčلم ŰŁÙ† ۳ۧŰčŰ© Ű§Ù„Ù†ŰžŰ§Ù… و ۳ۧŰčŰ© Ű§Ù„ŰŹÙ‡Ű§ŰČ Űčلى Ù†ÙŰł Ű§Ù„ŰȘوقيŰȘ. Ù‡Ű°Ű§\n"
+#~ "Ù…ÙÙŠŰŻ ŰčÙ†ŰŻÙ…Ű§ ŰȘŰłŰȘŰ¶ÙŠÙ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű© Ù†ŰžŰ§Ù… ŰȘŰŽŰșيل ۹۟۱ Ù…Ű«Ù„ Windows.\n"
+#~ "\n"
+#~ "ŰźÙŠŰ§Ű± \"ŰȘŰČŰ§Ù…Ù† ŰąÙ„ÙŠ للوقŰȘ\" ŰłÙŠÙ‚ÙˆÙ… ŰąÙ„ÙŠŰ§Ù‹ ۚ۶ۚ۷ Ű§Ù„ŰłŰ§ŰčŰ© Űčن Ű·Ű±ÙŠÙ‚\n"
+#~ "ۧ?ŰȘŰ”Ű§Ù„ ŰšŰźŰ§ŰŻÙ… وقŰȘ ŰšŰčÙŠŰŻ Űčلى ۧ?نŰȘŰ±Ù†ŰȘ. كي ŰȘŰčمل Ù‡Ű°Ù‡ Ű§Ù„Ù…ÙŠŰČŰ©,\n"
+#~ "ÙŠŰŹŰš ŰŁÙ† ŰȘكون Ù„ŰŻÙŠÙƒ ÙˆŰ”Ù„Ű© Ű§Ù†ŰȘŰ±Ù†ŰȘ ŰčŰ§Ù…Ù„Ű©. من ۧ?ÙŰ¶Ù„ ۧ۟ŰȘÙŠŰ§Ű± ŰźŰ§ŰŻÙ…\n"
+#~ "Ű§Ù„ÙˆÙ‚ŰȘ ۧ?Ù‚Ű±Űš Ű§Ù„ÙŠÙƒ. Ù‡Ű°Ű§ Ű§Ù„ŰźÙŠŰ§Ű± ÙŠŰ«ŰšŰȘ ŰźŰ§ŰŻÙ… وقŰȘ\n"
+#~ "يمكن ۧ۳ŰȘŰźŰŻŰ§Ù…Ù‡ Űčن Ű·Ű±ÙŠÙ‚ Ű§Ù„Ù…Ű§ÙƒÙŠÙ†Ű§ŰȘ ۧ?ŰźŰ±Ù‰ Űčلى Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ©."
+
+#~ msgid ""
+#~ "You will now set up your Internet/network connection. If you wish to\n"
+#~ "connect your computer to the Internet or to a local network, click "
+#~ "\"Next\n"
+#~ "->\". Mandrake Linux will attempt to autodetect network devices and "
+#~ "modems.\n"
+#~ "If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
+#~ "also choose not to configure the network, or to do it later, in which "
+#~ "case\n"
+#~ "clicking the \"Cancel\" button will take you to the next step.\n"
+#~ "\n"
+#~ "When configuring your network, the available connections options are:\n"
+#~ "traditional modem, ISDN modem, ADSL connection, cable modem, and finally "
+#~ "a\n"
+#~ "simple LAN connection (Ethernet).\n"
+#~ "\n"
+#~ "We will not detail each configuration option - just make sure that you "
+#~ "have\n"
+#~ "all the parameters, such as IP address, default gateway, DNS servers, "
+#~ "etc.\n"
+#~ "from your Internet Service Provider or system administrator.\n"
+#~ "\n"
+#~ "You can consult the ``Starter Guide'' chapter about Internet connections\n"
+#~ "for details about the configuration, or simply wait until your system is\n"
+#~ "installed and use the program described there to configure your "
+#~ "connection."
+#~ msgstr ""
+#~ "ŰłŰȘقوم ۧ?ن ۚۄŰčۯۧۯ ÙˆŰ”Ù„Ű© ۧ?نŰȘŰ±Ù†ŰȘ/Ű§Ù„ŰŽŰšÙƒŰ© Ű§Ù„ŰźŰ§Ű”Ű© ŰšÙƒ. ۧ۰ۧ كنŰȘ ŰȘŰ±ÙŠŰŻ\n"
+#~ "ŰȘÙˆŰ”ÙŠÙ„ ŰŹÙ‡Ű§ŰČك ۚۧ?نŰȘŰ±Ù†ŰȘ ŰŁÙˆ Ù„Ù„ŰŽŰšÙƒŰ© Ű§Ù„Ù…Ű­Ù„ÙŠŰ©, Ű§Ù†Ù‚Ű± \"Ű§Ù„ŰȘŰ§Ù„ÙŠ ->\"\n"
+#~ "ŰłÙŠŰ­Ű§ÙˆÙ„ Mandrake Linux ŰŁÙ† يŰȘŰ­Ù‚Ù‚ ŰąÙ„ÙŠŰ§Ù‹ من ÙˆŰŹÙˆŰŻ ۧ?ŰŹÙ‡ŰČŰ© و Ű§Ù„Ù…ÙˆŰŻÙ…Ű§ŰȘ.\n"
+#~ "ۧ۰ۧ ÙŰŽÙ„ Ű§Ù„ŰȘŰ­Ù‚Ù‚, ŰŁŰČل Ű§Ù„ŰȘۣێۚ۱ من \"ۧ۳ŰȘŰźŰŻÙ… Ű§Ù„ŰȘŰ­Ù‚Ù‚ ۧ?لي\". Ű±ŰšÙ…Ű§ ŰȘŰźŰȘۧ۱\n"
+#~ "ŰčŰŻÙ… ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰŽŰšÙƒŰ©, ŰŁÙˆ ŰȘŰ±ÙŠŰŻ ŰŁÙ† ŰȘفŰčل Ű°Ù„Ùƒ, في Ù‡Ű°Ù‡ Ű§Ù„Ű­Ű§Ù„\n"
+#~ "ÙŰ„Ù† ۶ŰșŰ· ŰČ۱ \"Ű§Ù„Űșۧۥ\" ŰłÙŠŰŁŰźŰ°Ùƒ Ű§Ù„Ù‰ Ű§Ù„ŰźŰ·ÙˆŰ© Ű§Ù„ŰȘŰ§Ù„ÙŠŰ©.\n"
+#~ "\n"
+#~ "ŰŁŰ«Ù†Ű§ŰĄ ŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰŽŰšÙƒŰ©, ÙŰ„Ù† ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„ŰȘÙˆŰ”ÙŠÙ„ Ű§Ù„Ù…ŰȘÙˆÙŰ±Ű© هي:\n"
+#~ "Ù…ÙˆŰŻÙ… ŰȘÙ‚Ù„ÙŠŰŻÙŠ, Ù…ÙˆŰŻÙ… ISDN, ÙˆŰ”Ù„Ű© ADSL, Ù…ÙˆŰŻÙ… ÙƒÙŠŰšÙ„, و ŰŁŰźÙŠŰ±Ű§Ù‹\n"
+#~ "ÙˆŰ”Ù„Ű© LAN ŰšŰłÙŠŰ·Ű© (Ű§ÙŠŰ«Ű±Ù†ŰȘ).\n"
+#~ "\n"
+#~ "لن Ù†Ű°ÙƒŰ± كل ŰźÙŠŰ§Ű±Ű§ŰȘ Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ© ŰšŰ§Ù„ŰȘÙŰ”ÙŠÙ„ - ÙÙ‚Ű· ŰȘŰŁÙƒŰŻ ŰŁÙ†Ù‡ Ù„ŰŻÙŠÙƒ\n"
+#~ "كل Ű§Ù„Ù…ŰčŰ§Ù…Ù„Ű§ŰȘ, Ù…Ű«Ù„ ŰčÙ†ÙˆŰ§Ù† IP, Ű§Ù„ŰšÙˆŰ§ŰšŰ© ۧ?فŰȘŰ±Ű§Ű¶ÙŠŰ©, ŰźŰ§ŰŻÙ…Ű§ŰȘ DNS, Ű§Ù„Űź.\n"
+#~ "من Ù…ÙˆÙŰ± ŰźŰŻÙ…Ű© ۧ?نŰȘŰ±Ù†ŰȘ ŰŁÙˆ Ù…ŰŻÙŠŰ± Ű§Ù„Ù†ŰžŰ§Ù….\n"
+#~ "\n"
+#~ "يمكنك Ű§Ù„Ű±ŰŹÙˆŰč Ű§Ù„Ù‰ Ű§Ù„ÙŰ”Ù„ Ű§Ù„ŰźŰ§Ű” ۚۄŰčۯۧۯ ÙˆŰ”Ù„Ű© ۧ?نŰȘŰ±Ù†ŰȘ في\n"
+#~ "``ŰŻÙ„ÙŠÙ„ Ű§Ù„Ù…ŰšŰȘŰŻŰŠ'' للŰȘÙŰ§Ű”ÙŠÙ„ Ű­ÙˆÙ„ Ű§Ù„ŰȘÙ‡ÙŠŰŠŰ©, ŰŁÙˆ ۚۚ۳ۧ۷۩ Ű§Ù†ŰȘ۞۱ Ű­ŰȘى يŰȘم\n"
+#~ "ŰȘŰ«ŰšÙŠŰȘ Ű§Ù„Ù†ŰžŰ§Ù… و ۧ۳ŰȘŰźŰŻÙ… Ű§Ù„ŰšŰ±Ù†Ű§Ù…ŰŹ Ű§Ù„Ù…Ű°ÙƒÙˆŰ± Ù‡Ù†Ű§Ùƒ ?Űčۯۧۯ Ű§Ù„ÙˆŰ”Ù„Ű©."
+
+#~ msgid "Harddrake2 version "
+#~ msgstr "Harddrake2 Ű§Ù„Ű„Ű”ŰŻŰ§Ű± "
+
+#~ msgid "Author:"
+#~ msgstr "Ű§Ù„Ù…Ű€Ù„Ù:"
+
+#~ msgid ""
+#~ "This is HardDrake, a Mandrake hardware configuration tool.\n"
+#~ "Version:"
+#~ msgstr ""
+#~ "Ù‡Ű°Ű§ هو HardDrake, ۣۯۧ۩ Mandrake لŰȘÙ‡ÙŠŰŠŰ© Ű§Ù„ŰčŰȘۧۯ.\n"
+#~ "Ű§Ù„Ű„Ű”ŰŻŰ§Ű±:"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Sound playing/editing programs"
-msgstr "ŰšŰ±Ű§Ù…ŰŹ ŰȘŰ­Ű±ÙŠŰ±/ŰȘŰŽŰșيل Ű§Ù„ÙÙŠŰŻÙŠÙˆ و Ű§Ù„Ű”ÙˆŰȘ"
+#~ msgid "Audio station"
+#~ msgstr "Ù…Ű­Ű·Ű© ÙˆŰłŰ§ŰŠŰ· مŰȘŰčŰŻŰŻŰ©"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Video station"
-msgstr "Ù…Ű­Ű·Ű© ŰŁÙ„Űčۧۚ"
+#~ msgid "Sound playing/editing programs"
+#~ msgstr "ŰšŰ±Ű§Ù…ŰŹ ŰȘŰ­Ű±ÙŠŰ±/ŰȘŰŽŰșيل Ű§Ù„ÙÙŠŰŻÙŠÙˆ و Ű§Ù„Ű”ÙˆŰȘ"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Video playing programs"
-msgstr "ŰšŰ±Ű§Ù…ŰŹ ŰȘŰ­Ű±ÙŠŰ±/ŰȘŰŽŰșيل Ű§Ù„ÙÙŠŰŻÙŠÙˆ و Ű§Ù„Ű”ÙˆŰȘ"
+#~ msgid "Video station"
+#~ msgstr "Ù…Ű­Ű·Ű© ŰŁÙ„Űčۧۚ"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Graphic station"
-msgstr "Ù…Ű­Ű·Ű© ŰŁÙ„Űčۧۚ"
+#~ msgid "Video playing programs"
+#~ msgstr "ŰšŰ±Ű§Ù…ŰŹ ŰȘŰ­Ű±ÙŠŰ±/ŰȘŰŽŰșيل Ű§Ù„ÙÙŠŰŻÙŠÙˆ و Ű§Ù„Ű”ÙˆŰȘ"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Graphics programs"
-msgstr "ŰšŰ±Ű§Ù…ŰŹ Ű±ŰłÙˆÙ…ÙŠŰ§ŰȘ Ù…Ű«Ù„ The Gimp"
+#~ msgid "Graphic station"
+#~ msgstr "Ù…Ű­Ű·Ű© ŰŁÙ„Űčۧۚ"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr ""
-"Ù…ŰŹÙ…ÙˆŰčŰ© من Ű§Ù„ŰŁŰŻÙˆŰ§ŰȘ Ù„Ù‚Ű±Ű§ŰĄŰ© و Ű§Ű±ŰłŰ§Ù„ Ű§Ù„ŰšŰ±ÙŠŰŻ و Ű§Ù„ŰŁŰźŰšŰ§Ű± (pine, mutt, tin..) و "
-"لŰȘŰ”ÙŰ­ Ű§Ù„Ű„Ù†ŰȘŰ±Ù†ŰȘ"
+#~ msgid "Graphics programs"
+#~ msgstr "ŰšŰ±Ű§Ù…ŰŹ Ű±ŰłÙˆÙ…ÙŠŰ§ŰȘ Ù…Ű«Ù„ The Gimp"
#~ msgid "Printer sharing"
#~ msgstr "Ù…ŰŽŰ§Ű±ÙƒŰ© Ű§Ù„Ű·Ű§ŰšŰčۧŰȘ"
@@ -18974,9 +19511,6 @@ msgstr ""
#~ msgid "GDI Laser Printer using the Zenographics ZJ-Stream Format"
#~ msgstr "GDI Laser Printer using the Zenographics ZJ-Stream Format"
-#~ msgid "%s"
-#~ msgstr "%s"
-
#~ msgid "Office"
#~ msgstr "ŰŁŰŻÙˆŰ§ŰȘ Ű§Ù„Ù…ÙƒŰȘŰš"
@@ -19136,12 +19670,10 @@ msgstr ""
#~ "button\n"
#~ "to change it if necessary.\n"
#~ "\n"
-#~ " * \"Keyboard\": check the current keyboard map configuration and click "
-#~ "on\n"
+#~ " * \"%s\": check the current keyboard map configuration and click on\n"
#~ "the button to change that if necessary.\n"
#~ "\n"
-#~ " * \"Country\": check the current country selection. If you are not in "
-#~ "this\n"
+#~ " * \"%s\": check the current country selection. If you are not in this\n"
#~ "country, click on the button and choose another one.\n"
#~ "\n"
#~ " * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
@@ -19245,8 +19777,7 @@ msgstr ""
#~ "your machine. If you're not sure, you can check the list of hardware\n"
#~ "detected in your machine by selecting \"See hardware info \" and "
#~ "clicking\n"
-#~ "the \"Next ->\". Examine the list of hardware and then click on the "
-#~ "\"Next\n"
+#~ "the \"%s\". Examine the list of hardware and then click on the \"Next\n"
#~ "->\" button to return to the SCSI interface question.\n"
#~ "\n"
#~ "If you had to manually specify your PCI SCSI adapter, DrakX will ask if "
@@ -19302,8 +19833,7 @@ msgstr ""
#~ "your\n"
#~ "first experience with GNU/Linux.\n"
#~ "\n"
-#~ " * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice "
-#~ "for\n"
+#~ " * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
#~ "printing to your local printer or to one halfway around the planet. It "
#~ "is\n"
#~ "simple to configure and can act as a server or a client for the ancient\n"
@@ -19312,7 +19842,7 @@ msgstr ""
#~ "setup\n"
#~ "is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, "
#~ "make\n"
-#~ "sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
+#~ "sure to turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
#~ "front-ends for printing or choosing printer options and for managing the\n"
#~ "printer.\n"
#~ "\n"
@@ -19333,7 +19863,7 @@ msgstr ""
#~ "و يŰčÙŠŰšÙ‡ Ű§Ù„ŰšŰ·ŰŠ ŰčÙ†ŰŻ ۧ?ŰłŰȘŰźŰŻŰ§Ù… مŰč Ű§Ù„ŰŽŰšÙƒŰ§ŰȘ). من ۧ?ÙŰ¶Ù„ ŰŁÙ† ŰȘŰłŰȘŰźŰŻÙ… \"pdq\" ۧ۰ۧ.\n"
#~ "ÙƒŰ§Ù†ŰȘ Ù‡Ű°Ù‡ ŰȘۏ۱ۚŰȘك ۧ?ولى مŰč Ù†ŰžŰ§Ù… Ù„ÙŠÙ†ÙƒŰł.\n"
#~ "\n"
-#~ " * \"CUPS\" - ``Common UNIX Printing System'', هو Ű§Ù„ŰźÙŠŰ§Ű± ۧ?Ù…Ű«Ù„\n"
+#~ " * \"%s\" - ``Common UNIX Printing System'', هو Ű§Ù„ŰźÙŠŰ§Ű± ۧ?Ù…Ű«Ù„\n"
#~ "Ù„Ù„Ű·ŰšŰ§ŰčŰ© Űčلى ۷ۧۚŰčŰȘك Ű§Ù„Ù…Ű­Ù„ÙŠŰ© ŰŁÙˆ Ű­ŰȘى Űčلى ۷ۧۚŰčŰ© في Ű§Ù„Ù†Ű”Ù ۧ?۟۱ من Ű§Ù„ÙƒÙˆÙƒŰš. Ű§Ù†Ù‡\n"
#~ "ŰłÙ‡Ù„ ۧ?Űčۯۧۯ و يمكن ŰŁÙ† يŰȘŰ”Ű±Ù ÙƒŰźŰ§ŰŻÙ… ŰŁÙˆ كŰčميل ?Ù†ŰžÙ…Ű© ۷ۚۧŰčŰ© \"lpd\"\n"
#~ "Ű§Ù„Ù‚ŰŻÙŠÙ…Ű©, Ù„Ű°Ű§ ÙŰ„Ù†Ù‡ مŰȘÙˆŰ§ÙÙ‚ مŰč ŰŁÙ†ŰžÙ…Ű© Ű§Ù„ŰȘŰŽŰșيل Ű§Ù„Ù‚ŰŻÙŠÙ…Ű©\n"
@@ -19352,7 +19882,7 @@ msgstr ""
#~ "documentation, the installer and the system in general. Select first the\n"
#~ "region you are located in, and then the language you speak.\n"
#~ "\n"
-#~ "Clicking on the \"Advanced\" button will allow you to select other\n"
+#~ "Clicking on the \"%s\" button will allow you to select other\n"
#~ "languages to be installed on your workstation, thereby installing the\n"
#~ "language-specific files for system documentation and applications. For\n"
#~ "example, if you will host users from Spain on your machine, select "
@@ -19362,7 +19892,7 @@ msgstr ""
#~ "\n"
#~ "Note that you're not limited to choosing a single additional language. "
#~ "Once\n"
-#~ "you have selected additional locales, click the \"Next ->\" button to\n"
+#~ "you have selected additional locales, click the \"%s\" button to\n"
#~ "continue.\n"
#~ "\n"
#~ "To switch between the various languages installed on the system, you can\n"
@@ -19391,7 +19921,7 @@ msgstr ""
#~ "ŰłÙŠŰșÙŠŰ± ÙÙ‚Ű· ۧŰčۯۧۯۧŰȘ Ű§Ù„Ù„ŰșŰ© Ù„Ù‡Ű°Ű§ Ű§Ù„Ù…ŰłŰȘŰźŰŻÙ… ÙÙ‚Ű·."
#~ msgid ""
-#~ "\"Country\": check the current country selection. If you are not in this\n"
+#~ "\"%s\": check the current country selection. If you are not in this\n"
#~ "country, click on the button and choose another one."
#~ msgstr ""
#~ "\"Ű§Ù„ŰšÙ„ŰŻ\": ŰȘŰŁÙƒŰŻ من ۧ۟ŰȘÙŠŰ§Ű± Ű§Ù„ŰšÙ„ŰŻ Ű§Ù„Ű­Ű§Ù„ÙŠ. ۧ۰ۧ لم ŰȘكن في Ù‡Ű°Ű§\n"
@@ -19809,9 +20339,6 @@ msgstr ""
#~ msgid "Install system updates"
#~ msgstr "ŰȘŰ«ŰšÙŠŰȘ ŰȘŰ­ŰŻÙŠŰ«Ű§ŰȘ Ű§Ù„Ù†ŰžŰ§Ù…"
-#~ msgid "Upgrade"
-#~ msgstr "ŰȘŰ±Ù‚ÙŠŰ©"
-
#~ msgid "Do you want to configure another printer?"
#~ msgstr "هل ŰȘŰ±ÙŠŰŻ ŰȘۏ۱ۚ۩ Ű„Űčۯۧۯ ۷ۧۚŰčŰ© ŰŁŰźŰ±Ù‰ŰŸ"
diff --git a/perl-install/share/po/az.po b/perl-install/share/po/az.po
index 20ae17419..78fa3b460 100644
--- a/perl-install/share/po/az.po
+++ b/perl-install/share/po/az.po
@@ -6,7 +6,7 @@
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
"PO-Revision-Date: 2001-09-01 22:26GMT +0200\n"
"Last-Translator: Vasif İsmayıloğlu MD <azerb_linux@hotmail.com>\n"
"Language-Team: Azerbaijani Turkish <linuxaz@azerimal.net>\n"
@@ -15,2989 +15,608 @@ msgstr ""
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 0.8\n"
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
-msgstr ""
-
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid "Cancel"
-msgstr "Ləğv et"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
+msgid "Scanning partitions to find mount points"
+msgstr "Bağlama nöqtələri ĂŒĂ§ĂŒn bölmələr daranır"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
-msgstr ""
-
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
+msgid "if set to yes, check additions/removals of suid root files."
msgstr ""
-"Bu paket yenilənməlidir\n"
-"Sistemdən çıxarmaq mövzusunda ciddisiniz?"
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
-#, c-format
-msgid "Custom"
-msgstr "XĂŒsusi"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Allow all users"
-msgstr "İstifadəçi əlavə et"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "No sharing"
-msgstr "CUPS baƟlayır"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "More"
-msgstr "Daha Çox"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Here is the full list of available countries"
-msgstr "BĂŒtĂŒn mövcud klaviaturaların siyahısı"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Please choose your country."
-msgstr "XahiƟ edirik siçanınızın növĂŒnĂŒ seçin."
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid " / Region"
-msgstr "Reyunion"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Country"
-msgstr "Ölkə:"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "All languages"
-msgstr "İƟlətdiyiniz dili seçin"
-
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use Unicode by default"
+msgid "\t\tErase=%s"
msgstr ""
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr "Qurulumdan sonra istifadə edə biləcəyiniz baƟqa dillər seçə bilərsiniz"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Please choose a language to use."
-msgstr "XahiƟ edirik istifadə ĂŒĂ§ĂŒn bir dil seçin."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Choose the window manager to run:"
-msgstr "İstifadə etmək istədiyiniz pəncərə idarəçisini seçin:"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Choose the default user:"
-msgstr "Əsas istifadəçini seçin:"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Do you want to use this feature?"
-msgstr "aboot istifadə etmək istəyirsiniz?"
-
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr ""
-"KompĂŒterinizi avtomatik olaraq bir istifadəçi ilə baƟlada bilərəm.\n"
-"İstəmirsiniz isə rədd edin."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Autologin"
-msgstr "Avtomatik GiriƟ"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Icon"
-msgstr "Timsal"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Shell"
-msgstr "Qabıq"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Password (again)"
-msgstr "Parol (təkrar)"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Password"
-msgstr "Parol"
-
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "User name"
-msgstr "Ä°stifadəçi adı"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Real name"
-msgstr "Həqiqi adı"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Accept user"
-msgstr "İstifadəçini qəbul et"
-
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
-#, c-format
-msgid "Done"
-msgstr "Qurtardı"
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Bir istifadəçi girin\n"
-"%s"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Add user"
-msgstr "İstifadəçini əlavə et"
-
-#: ../../any.pm:1
-#, c-format
-msgid "This user name has already been added"
-msgstr "Bu istifadəçi adı artıq vardır"
+msgid "network printer port"
+msgstr "ƞəbəkə Çap Edicisi (soket) "
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "The user name is too long"
-msgstr "Bu istifadəçi adı artıq vardır"
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Ä°stifadəçi adında sadacə kiçik hərflər, rəqəmlər, `-' və `_' xarakterləri "
-"ola bilər"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Please give a user name"
-msgstr "XahiƟ edirik bir istifadəçi adı alın"
+msgid "Please insert floppy disk:"
+msgstr "%s sĂŒrĂŒcĂŒsĂŒnə bir disket taxın"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "This password is too simple"
-msgstr "Zəif parol seçdiniz!"
+msgid "PCMCIA"
+msgstr "PCMCIA"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please try again"
-msgstr "XahiƟ edirik təkrar sınayın"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "The passwords do not match"
-msgstr "Parollar uyğun gəlmir"
-
-#: ../../any.pm:1
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s artıq əlavə edilmiƟdir)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to compilation tools"
-msgstr ""
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to network tools"
-msgstr ""
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm:1
-#, c-format
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm:1
-#, c-format
msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"The backup partition table has not the same size\n"
+"Still continue?"
msgstr ""
-"Buradakı bir birindən fərqli seçənəklərə yenilərini əlavə edə bilər,\n"
-"ya da mövcud olanları dəyiƟdirə bilərsiniz."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Other OS (windows...)"
-msgstr "Digər sistemlər (windows...)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Digər sistemlər (MacOS...)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Digər sistemlər (SunOS...)"
+"Yedək bölmə cədvəli eyni böyĂŒklĂŒyə sahib deyil\n"
+"Davam etmək istəyirsiniz?"
-#: ../../any.pm:1 ../../standalone/drakbackup:1
-#, c-format
-msgid "Linux"
-msgstr "Linuks"
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Which username"
+msgstr "Ä°stifadəçi adı"
#: ../../any.pm:1
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "Ne cĂŒr bir giriƟ istəyirsiniz?"
-#: ../../any.pm:1
-#, c-format
-msgid "This label is already used"
-msgstr "Bu etiket istifadə edilməz"
-
-#: ../../any.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "You must specify a root partition"
-msgstr "Bir swap sahəsinə ehtiyacınız var"
-
-#: ../../any.pm:1
-#, c-format
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm:1
-#, c-format
-msgid "Empty label not allowed"
-msgstr "BoƟ etiket qəbul edilə bilməz"
-
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Default"
-msgstr "Əsas"
-
-#: ../../any.pm:1
-#, c-format
-msgid "NoVideo"
-msgstr "NoVÄ°deo"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Initrd-size"
-msgstr "Initrd böyĂŒklĂŒyĂŒ"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Append"
-msgstr "Sonuna əlavə et"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Label"
-msgstr "Etiket"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Unsafe"
-msgstr "E'tibarsız"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Table"
-msgstr "Cədvəl"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Root"
-msgstr "Kök"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Read-write"
-msgstr "Oxu-yaz"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Video mode"
-msgstr "Ekran modu"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Image"
-msgstr "Əks"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Default OS?"
-msgstr "Əsas OS"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Enable OF Boot?"
-msgstr "OF AçılÄ±ĆŸÄ± FəallaƟdırım?"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Enable CD Boot?"
-msgstr "CDdən AçılÄ±ĆŸÄ± FəallaƟdırım?"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Çəkirdək AçılÄ±ĆŸÄ± Vaxt Dolması"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Open Firmware Delay"
-msgstr "Firmware Gecikməsini Aç"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Boot device"
-msgstr "AçılÄ±ĆŸ avadanlığı"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Init Message"
-msgstr "İnit İsmarıcı"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Bootloader to use"
-msgstr "Ä°stifadə ediləcək AçılÄ±ĆŸ idarəcisi"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Bootloader main options"
-msgstr "Sistem yĂŒkləyicisi ana seçənəkləri"
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"``Əmr sətiri seçənəklərini məhdudlaƟdır`` seçənəyi parolsuz bir iƟə yaramaz"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Give the ram size in MB"
-msgstr "YaddaƟ miqdarını Mb cinsindən verin"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Enable multiple profiles"
-msgstr "Birdən artıq profilə icazə ver"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Ümumi yaddaƟ miqdarı (%d MB tapıldı)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "/tmp-i hər açılÄ±ĆŸda təmizlə"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Create a bootdisk"
-msgstr "AçılÄ±ĆŸ disketi yarat"
-
-#: ../../any.pm:1
-#, c-format
-msgid "restrict"
-msgstr "məhdudlaƟdır"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Restrict command line options"
-msgstr "Əmr sətiri seçənəklərini məhdudlaƟdır"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Force No APIC"
-msgstr ""
+msgid "Restore partition table"
+msgstr "Bölmə cədvəlini qurtar"
-#: ../../any.pm:1
+#: ../../printer/cups.pm:1
#, fuzzy, c-format
-msgid "Enable ACPI"
-msgstr "CDdən AçılÄ±ĆŸÄ± FəallaƟdırım?"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Delay before booting default image"
-msgstr "AçılÄ±ĆŸda gecikmə mĂŒddəti"
-
-#: ../../any.pm:1
-#, c-format
-msgid "compact"
-msgstr "bəsit"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Compact"
-msgstr "Bəsit"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Bootloader installation"
-msgstr "AçılÄ±ĆŸ yĂŒkləyici quruluƟu"
-
-#: ../../any.pm:1
-#, c-format
-msgid "First sector of boot partition"
-msgstr "AçılÄ±ĆŸ qisminin ilk sektoru"
-
-#: ../../any.pm:1
-#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Diskin ilk sektoru (MBR)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Sistem yĂŒkləyicisini haraya qurmaq istəyirsiniz?"
+msgid "On CUPS server \"%s\""
+msgstr "CUPS verici IP"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "LILO/grub Installation"
-msgstr "LILO/grup Qurulumu"
+msgid "Post-install configuration"
+msgstr "Qurulum sonrası qurğular"
-#: ../../any.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "SILO Installation"
-msgstr "SILO Qurulumu"
+msgid "Use ``%s'' instead"
+msgstr "Yerinə ``%s'' iƟlət"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Skip"
-msgstr "Nəzərə Alma"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "On Floppy"
-msgstr "Disketə qeyd et"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "First sector of the root partition"
-msgstr "AçılÄ±ĆŸ qisminin ilk sektoru"
+msgid "Type"
+msgstr "Növ"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
"\n"
-"On which drive are you booting?"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Creating bootdisk..."
-msgstr "AçılÄ±ĆŸ disketi yaradılır"
+msgid "Sri Lanka"
+msgstr "ƞri Lanka"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "%s sĂŒrĂŒcĂŒsĂŒnə bir disket taxın"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "AçılÄ±ĆŸ disketi yaratmaq ĂŒĂ§ĂŒn istifadə ediləcək disket sĂŒrĂŒcĂŒyĂŒ seçin"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Second floppy drive"
-msgstr "Ä°kinci disket sĂŒrĂŒcĂŒ"
-
-#: ../../any.pm:1
-#, c-format
-msgid "First floppy drive"
-msgstr "Ä°lk disket sĂŒrĂŒcĂŒ"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "BaÄŸÄ±ĆŸlayın, disket sĂŒrĂŒcĂŒ yoxdur"
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"XĂŒsusi bir açılÄ±ĆŸ disketi, Linuks sisteminizin normal bir sistem yĂŒkləyiciyə "
-"lĂŒzĂŒm\n"
-"olmadan açılmasına imkan verər. Əgə sisteminizə lilo (ya da grub) "
-"qurmayacaqsanız,\n"
-"ya da baƟqa bir əməliyyat sistemi liloyu silərsa ya da lilo "
-"avadanlığınızlaiƟləməzsə\n"
-"bu disket sizə yardımçi olacaqdır. Sonradan Mandrake qurtarma disketi "
-"rəsmini\n"
-"istifadə edərək də bu disket yaradıla bilər.\n"
-"AçılÄ±ĆŸ disketi yaratmaq istəyirsiniz?\n"
-"AçılÄ±ĆŸ disketi yaratmaq istəyirsinizsə, birinci disket sĂŒrĂŒcĂŒyədisklet "
-"yerləƟdirin\n"
-"və \"OLDU\" basın.\n"
-"%s"
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../any.pm:1
-#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"XĂŒsusi bir açılÄ±ĆŸ disketi, Linuks sisteminizin normal bir sistem yĂŒkləyiciyə "
-"lĂŒzĂŒm\n"
-"olmadan açılmasına imkan verər. Əgə sisteminizə lilo (ya da grub) "
-"qurmayacaqsanız,\n"
-"ya da baƟqa bir əməliyyat sistemi liloyu silərsa ya da lilo "
-"avadanlığınızlaiƟləməzsə\n"
-"bu disket sizə yardımçi olacaqdır. Sonradan Mandrake qurtarma disketi "
-"rəsmini\n"
-"istifadə edərək də bu disket yaradıla bilər.\n"
-"AçılÄ±ĆŸ disketi yaratmaq istəyirsiniz?\n"
-"AçılÄ±ĆŸ disketi yaratmaq istəyirsinizsə, birinci disket sĂŒrĂŒcĂŒyə disket "
-"yerləƟdirin\n"
-"və \"OLDU\" basın."
-
-#: ../../bootloader.pm:1
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Sistem yĂŒkləyicisini haraya qurmaq istəyirsiniz?"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "not enough room in /boot"
-msgstr "/boot içində lazımi yer yoxdur"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Isaretli secenek %d saniye icinde sistemi acacaq."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr ""
-"acilisdan evvel emrleri duzeltmək ucun 'e', emr setiri ucun ise 'c' basin"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Sistemi secili emeliyyat sistemiyle acmaq ucun entere,"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "%c ve %c duymeleri ile isıqlandırılmıs girisleri sece bilersiniz"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Emeliyyat sistemi secici GRUB'a xos gəlmissiniz!"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "LILO with text menu"
-msgstr "Mətn menyulu LILO"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "LILO with graphical menu"
-msgstr "Qrafiki menyulu LILO"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "SILO"
-msgstr "SILO"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"%s emeliyyat sistemi secki proqramina xos gəlmissiniz!\n"
-"\n"
-"Içlerinden birini acmaq ucun adini yazin ve <ENTER>\n"
-"duymesine basin ve ya esas acilis ucun %d saniye gozleyin.\n"
+"The following printer\n"
"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr "Siseminizdə Ɵəbəkə adapteri yoxdur!"
-#: ../../common.pm:1
-#, c-format
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../common.pm:1
-#, c-format
-msgid "kdesu missing"
-msgstr "kdesu əksikdir"
-
-#: ../../common.pm:1
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Qurulumdan sonra istifadə edə biləcəyiniz baƟqa dillər seçə bilərsiniz"
-
-#: ../../common.pm:1
-#, fuzzy, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "Artıq bölmə əlavə edilə bilməz"
-
-#: ../../common.pm:1
-#, fuzzy, c-format
-msgid "%d seconds"
-msgstr "%d saniyə sonra çıxılacaq"
-
-#: ../../common.pm:1
-#, c-format
-msgid "1 minute"
-msgstr ""
-
-#: ../../common.pm:1
-#, c-format
-msgid "%d minutes"
-msgstr ""
-
-#: ../../common.pm:1
-#, c-format
-msgid "TB"
-msgstr ""
-
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "GB"
-msgstr ""
+msgid "Central African Republic"
+msgstr "Mərkəzi Afrika Respublikası"
-#: ../../common.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "MB"
-msgstr "MB"
+msgid "Gateway device"
+msgstr "Keçit avadanlığı"
-#: ../../common.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "KB"
+msgid "Net Method:"
msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "United States"
-msgstr "BirləƟmiƟ ƞtatlar"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Austria"
-msgstr "serial"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "Italy"
-msgstr "Ä°talyanca"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "Netherlands"
-msgstr "Hollandiya"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Sweden"
-msgstr "İsveçcə"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Norway"
-msgstr "Norveçcə"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Greece"
-msgstr "Yunanca"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "Germany"
-msgstr "Almanca"
+msgid "Ethernetcard"
+msgstr "Eternet Kartı"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Czech Republic"
-msgstr "Çex Respublikası"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid "Belgium"
-msgstr "Belçika dili"
+msgid "Parameters"
+msgstr "Parametrlər"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../harddrake/v4l.pm:1
#, fuzzy, c-format
-msgid "France"
-msgstr "Fransızca"
+msgid "Auto-detect"
+msgstr "Avtomatik təsbit iƟlət"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Costa Rica"
-msgstr "Kosta Rika"
+msgid "Interface:"
+msgstr "Ara ĂŒz"
-#: ../../fsedit.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Yazmaq ĂŒĂ§ĂŒn açılan %s'də xəta: %s"
+msgid "Select installation class"
+msgstr "QuruluƟ sinifini seçin"
-#: ../../fsedit.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Avtomatik yerləƟdirmə ĂŒĂ§ĂŒn boƟ sahə yoxdur"
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "%s ĂŒĂ§ĂŒn LVM Məntiqi Cildini istifadə edə bilməzsiniz"
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
+msgid "on CDROM"
msgstr ""
-"Bu bağlama nöqtəsi ĂŒĂ§ĂŒn həqiqi bir fayl sisteminə (ext2, reisrfs)\n"
-"ehtiyac vardır.\n"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Bu qovluq kök fayl sistemi içərisində olmalıdır"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "%s ĂŒĂ§ĂŒn LVM Məntiqi Cildini istifadə edə bilməzsiniz"
-#: ../../fsedit.pm:1
+#: ../../network/tools.pm:1
#, fuzzy, c-format
msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
msgstr ""
-"Bir proqram tə'minatlı RAID bölməsini kök qovluğu (/) olaraq tə'yin "
-"etdiniz.\n"
-"Əgər lilo ya da grub istifadə etmək istəyirsinizsə, bir /boot bölməsi\n"
-"əlavə etməyi unutmayın"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Onsuz da bağlama nöqtəsi %s olan bir bölmə var\n"
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "Çap edici adı təkcə hərf, rəqəm və alt xətt daxil edə bilər"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Bağlama nöqtələri / ilə baƟlamalıdır"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "32MB dən kiçik disk bölmələrində ReiserFS istifadə etməlisiniz"
+"Sisteminiz İnternetə bağlı deyil.\n"
+"Bağlantını yenidən quraƟdırın"
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "16MB dən kiçik disk bölmələrində JFS istifadə etməlisiniz"
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
msgid ""
-"I can't read the partition table of device %s, it's too corrupted for me :(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
"\n"
-"Do you agree to loose all the partitions?\n"
+"Do you really want to continue setting up this printer as you are doing now?"
msgstr ""
-"Bölmə cədvəlinizi oxuya bilmirəm, dəyəsən biraz xarab olub:-(\n"
-"Xarab olmuƟ bolmələri dĂŒzəltməyə çalÄ±ĆŸacam.\n"
-"Amma bĂŒtĂŒn mə'lumatlar itəcəkdir.\n"
-"BaƟqa bir yol isə DrakXin bölmə cədvəllərini yoxlamasını "
-"passivləƟdirməkdir.\n"
-"(xəta %s)\n"
-"\n"
-"BĂŒtĂŒn bölmələri itirmək istəyirsiniz?\n"
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Error"
-msgstr "Xəta"
+msgid "Belarus"
+msgstr "Belarusiya"
-#: ../../fsedit.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "server"
-msgstr "verici"
+msgid "Error writing to file %s"
+msgstr "%s faylına yazarkən xəta oldu"
-#: ../../fsedit.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "with /usr"
+msgid ""
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
msgstr ""
+"apmd batareya vəziyyətini izləmək ĂŒĂ§ĂŒn və syslog aracılığıyla bunun qeydini "
+"tutmaq ĂŒĂ§ĂŒn istifadə edilir.\n"
+"Ayrıca batareya azaldığında sistemi qapatmaq ĂŒĂ§ĂŒn də istifadə edilir."
-#: ../../fsedit.pm:1
-#, c-format
-msgid "simple"
-msgstr "bəsit"
-
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Enabling swap partition %s"
-msgstr "ƞəkilləndirilən bölmə: %s"
-
-#: ../../fs.pm:1 ../../partition_table.pm:1
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "%s ayrılırkən xəta oldu: %s"
+msgid "Use tape to backup"
+msgstr "Xətalı yedəkləmə faylı"
-#: ../../fs.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm:1
-#, fuzzy, c-format
-msgid "Mounting partition %s"
-msgstr "ƞəkilləndirilən bölmə: %s"
+msgid "The following packages are going to be installed"
+msgstr "AƟağıdakı paketlər qurulacaqdır"
-#: ../../fs.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Checking %s"
-msgstr "Rezolyusiya: %s\n"
+msgid "CUPS configuration"
+msgstr "Yerli ƞəbəkə QuraƟdırılması"
-#: ../../fs.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Formatting partition %s"
-msgstr "ƞəkilləndirilən bölmə: %s"
+msgid "Hong Kong"
+msgstr "Honq Konq"
-#: ../../fs.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Creating and formatting file %s"
-msgstr "%s faylı yaradılır və Ɵəkilləndirilir"
+msgid "Not enough free space to allocate new partitions"
+msgstr "Yeni bölmələr ĂŒĂ§ĂŒn boƟ sahə yoxdur"
-#: ../../fs.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "%s'i necə Ɵəkilləndirəcəyimi bilmirəm (Növ: %s)"
+msgid "Moving"
+msgstr "DaĆŸÄ±nır"
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s Ɵəkilləndirilməsində %s bölmə xətası"
-
-#: ../../help.pm:1
-#, fuzzy, c-format
msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"SĂŒrĂŒcĂŒdəki bĂŒtĂŒn bilgiləri və bölmələri silmək ĂŒĂ§ĂŒn\n"
-"\"Oldu\" dĂŒyməsinə basın. Diqqətli olun,\"Oldu\" dĂŒyməsinə basdıqdan sonra\n"
-"Windows bilgiləri də daxil olmaq ĂŒzərəbĂŒtĂŒn bölmə mə'lumatı geri dönməyəcək "
-"Ɵəkildə silinəcək.\n"
"\n"
+"Drakbackup activities via %s:\n"
"\n"
-"Bölmədəki mə'lumatları qoruyaraq \"Ləğv et\" dĂŒyməsinə\n"
-"əməliyyatı ləğv edə bilərsiniz."
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
msgstr ""
-"Linuks Mandrakeni yĂŒkləmak ĂŒĂ§ĂŒn sĂŒrĂŒcĂŒyĂŒ seçin.\n"
-"Diqqətli olun, sĂŒrĂŒcĂŒdəki bĂŒtĂŒn mə'lumatlar silinəcək\n"
-"və geri gəlməyəcək."
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
+msgid "("
msgstr ""
-#: ../../help.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
-msgstr ""
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot NewWorld MacIntosh avadalığı ĂŒĂ§ĂŒn açılÄ±ĆŸ idarəcisidir. Ayrıca\n"
-"GNU/Linuks, MacOS, və ya MacOSX sistemlərini kompĂŒterinizdə varsa, "
-"açacaqdır.\n"
-"Normalda, bu əməliyyat sistemləri dĂŒzgĂŒn tapılıb qurula bilirlər\n"
-"Əgər belə olmazsa, bu ekrandan əllə lazımi qurğuları girə bilərsiniz.\n"
-"DĂŒzgĂŒn parametrləri girib girmədiyinizi yaxĆŸÄ±ca bir yoxlayın.\n"
-"\n"
-"\n"
-"Yaboot ana seçənəkləri:\n"
-"\n"
-"\n"
-" - BaƟlanğıc Ä°smarıcı: AçılÄ±ĆŸdan əvvəl çıxan sadə bir ismarıc.\n"
-"\n"
-"\n"
-" - AçılÄ±ĆŸ Avadanlığı: GNU/Linuksu hardan baƟlatmaq istədiyinizi bildirir."
-"Ümumiyyətlə bu mə'lumatı daha əvvəl \"bootstrap\" quraƟdırılması "
-"sırasındabildirmiƟ olacaqsınız.\n"
-"\n"
-"\n"
-" - Açıq Firmware Gecikməsi: LILOdan fərqli olaraq, yabootda iki dənə "
-"gecikmə vardır\n"
-"Birinci gecikmə saniyələrlə ölĂ§ĂŒlĂŒr və bu arada siz\n"
-"CD, OF açılÄ±ĆŸÄ±, MacOS və ya Linuks arasında seçki aparmalısınız.\n"
-"\n"
-"\n"
-" - Kernel AçılÄ±ĆŸ Vaxt Dolması: Bu vaxt dolması LILO açılÄ±ĆŸ gecikməsinə "
-"uyğun gəlir. Linuksu\n"
-"seçdikdən sonra ana kernel parametri olaraq bu gecikmə 0.1 saniyə olaraq "
-"qurulu olacaqdır.\n"
-"\n"
-"\n"
-" - CD AçılÄ±ĆŸÄ± FəallaƟsınmı?: Bu seçənəklə CDdən açılÄ±ĆŸÄ± timsal edən 'C' "
-"xarakteri ilk açılÄ±ĆŸda çıxacaqdır.\n"
-"\n"
-"\n"
-" - OF AçılÄ±ĆŸÄ± FəallaƟsın?: Bu seçənəklə OFdən (Open Firmware) açılÄ±ĆŸÄ±nı "
-"timsal edən 'N' xarakteri\n"
-"ilk açılÄ±ĆŸda çıxacaqdır.\n"
-"\n"
-"\n"
-" - Ana OS: OF gecikməsi mĂŒddəti dolduğu vaxt hansı OSnin açılacağını "
-"göstərir."
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
-msgstr ""
-"Burada yaboot ĂŒĂ§ĂŒn həm baƟqa əməliyyat sistemləri, həm alternativ "
-"kernellər,\n"
-" ya da təcili yardım açılÄ±ĆŸ əksləri əlavə edə bilərsiniz.\n"
-"\n"
-"\n"
-"BaƟqa OSlər ĂŒĂ§ĂŒn giriƟin mənası ad və kök Ă§Ä±ÄŸÄ±rından ibarətdir.\n"
-"\n"
-"\n"
-"Linuks ĂŒĂ§ĂŒn mĂŒhtəməl giriƟlər bunlar ola bilər: \n"
-"\n"
-"\n"
-" - Ad: Bu sadəcə olaraq yaboot ĂŒĂ§ĂŒn açılacaq sistemi timsal edən bir "
-"addır.\n"
-"\n"
-"\n"
-" - Əks: Bu isə açılacaq çəkirdəyin, yə'ni kernelin adıdır. Çox vaxt bu "
-"vmlinux və ya\n"
-"bunun variasiyalarıdır.\n"
-"\n"
-"\n"
-" - Kök: Linuks qurulumunun kök avadanlığı və ya '/'.\n"
-"\n"
-"\n"
-" \n"
-" - Əlavə: Apple avadanlıqlarında kernel əlavə seçənəkləri ilə sıxlıqla "
-"baƟlanğıc\n"
-"video avadanlığı və ya sıx sıx xəta verən 2ci və 3cĂŒ siçan dĂŒymələri ĂŒĂ§ĂŒn "
-"emulyasiya\n"
-"imkanları tanına bilir. Məsələn bunlar \n"
-"bir neçə nĂŒmunədir:\n"
-"\n"
-"\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-" - Initrd: AçılÄ±ĆŸ avadanlığından əvvəl bə'zi açılÄ±ĆŸ modullarını seçmək\n"
-"ĂŒĂ§ĂŒn iƟlədilir, ya da təcili yardım açılÄ±ĆŸlarında ramdisk əksini yĂŒkləmək "
-"imkanı verir.\n"
-"\n"
-"\n"
-" - Initrd-size: Ana ramdisk böyĂŒklĂŒyĂŒ ĂŒmumiyyətlə 4096 baytdır. Əgər daha "
-"geniƟ ramdisk bildirə\n"
-"bilərsiniz isə bu seçənəyi iƟlədin.\n"
-"\n"
-"\n"
-" - Oxuma-yazma: Normalda sistemin 'dirilməsindən' əvvəl bə'zi sınaqların "
-"aparıla bilməsi ĂŒĂ§ĂŒn\n"
-"'root' fayl sistemi bu moda soxulur. Bu seçənəyi nəzərə almayabilərsiniz.\n"
-"\n"
-"\n"
-" - NoVideo: Bəlkə Apple video avadanlığı problem çıxarda bilər.Onda bu "
-"seçənəklə\n"
-"sistemi 'novideo' modda təbii framebuffer dəstəyi ilə aça bilərsiniz.\n"
-"\n"
-"\n"
-" - Əsas: Bu seçənəklə Linuks sistemi əsas əməliyyat sistemi halına gətirə "
-"bilərsiniz.\n"
-"Onda ENTER dĂŒyməsinə basmaqla Linuks sistemi açılacaqdır. Bu giriƟ ayrıca "
-"TAB ilə açılÄ±ĆŸ seçkilərinə baxdığınız vaxt \n"
-"'*' iƟarətilə iĆŸÄ±qlandırılacaqdır."
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
+"Welcome to The Network Configuration Wizard.\n"
"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
msgstr ""
-"DrakX PCI SCSI adapterleri axtarmağa cəhd edəcək. Əgə DrakX SCSI\n"
-"taparsa və hansı sĂŒrĂŒcĂŒ iƟlədiləcəyini bilərsə, her Ɵey öz özĂŒnə\n"
-"qurulacaq.\n"
-"\n"
-"\n"
-"Əgər sisteminizdə SCSI adapteri yoxsa, DrakXin tanımayacağı bir\n"
-"ISA SCSI və ya PCI SCSI adapteri var isə, sizə sisteminizdə SCSI\n"
-"adapteri olub olmadığı soruƟulacaq.\n"
-"Əgər SCSI adapteriniz yox isə, \"Yox\" tıqlayın. Əgər \"Var\"ı "
-"tıqlayarsanız.\n"
-"qarĆŸÄ±nıza sĂŒrĂŒcĂŒləin siyahısı çıxacaq, oradan sizə uyanını seçərsiniz.\n"
-"\n"
-"\n"
-"Əgər əllə qurmağı səçərsəniz, o zaman DrakX sizə adapterin xĂŒsusiyyətlərini\n"
-"soruƟacaq. Ä°mkan verin ki, DrakX sərbəstcə özĂŒ xĂŒsusiyyətləri tapsın.\n"
-"Çoxunda bu iƟə yarayır.\n"
-"\n"
-"\n"
-"Əgər istəmirsəniz isə, o zaman adapter ĂŒĂ§ĂŒn xĂŒsusiyyətləri özĂŒnĂŒz\n"
-"göstərməlisiniz. Bunun ĂŒĂ§ĂŒn Ä°stifadəçinin Əl Kitabçasına\n"
-"(baƟlıq 3, \"Avadanlığınız ĂŒĂ§ĂŒn kollektiv mə'lumat) bölməsinə\n"
-"baxın. Ya da avadanlığınızın əl kitabçasından və ya\n"
-"veb səhifəsindən (Əgər internetə çıxÄ±ĆŸÄ±nız var isə)\n"
-"ya da Microsoft Windowsdan (Əgər sisteminizdə qurulu isə)\n"
-"mə'lumat alın."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
+"ƞəbəkə QuraƟdırma Sehirbazına Xoç Gəldiniz\n"
"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
-msgstr ""
+"Ä°nternet/ƞəbəkə qurğularınızı edəcəyik.\n"
+"Avtomatik təsbit istəmirsiniz isə iƟarəti qaldırın.\n"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
+msgid ")"
msgstr ""
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-"LILO (Linuks YĂŒkləyici) və Grub açılÄ±ĆŸ sistem yĂŒkləyiciləridir: sistemi "
-"Linuks\n"
-"ya da kompĂŒterinizdə olan baƟqa bir əməliyyatiyle aça bilərlər.\n"
-"Əsasən bu digər əməliyyat sistemləri doğru bir Ɵəkilde təsbit edilib "
-"açılÄ±ĆŸa\n"
-"qurula bilərlər. Əgər bir problem olarsa, buradan əllə əlavə edilə "
-"bilərlər.\n"
-"Parametrlər mövzusunda diqqətli olun."
-
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
-msgstr ""
+msgid "Lebanon"
+msgstr "Livan"
-#: ../../help.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
-msgstr ""
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
-#: ../../help.pm:1
+#: ../../services.pm:1
#, fuzzy, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"XahiƟ edirik doğru qapını seçin. Məsələn, MS Windowsdakı COM1'in qarĆŸÄ±lığı\n"
-"Linuksda ttyS0'dır."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
-msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
-msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
+msgid "Stop"
+msgstr "Sektor"
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Edit selected host"
+msgstr "%s tapıldı"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"SĂŒrĂŒcĂŒnĂŒzdə bir və ya daha çox Windows bölməsi tapıldı.\n"
-"XahiƟ edirik Linuks Mandrakeni qurmaq ĂŒĂ§ĂŒn onlardan birini "
-"yenidənölĂ§ĂŒləndirmək ĂŒzərə seçin.\n"
-"\n"
-"\n"
-"Xəbəriniz olsun, her bölmə bu cĂŒr sıralanıb; \"Linuks adı\",\"Windows\n"
-"adı\"\"Həcm\".\n"
-"\n"
-"\"Linuks adı\" bu cĂŒr kodlanıb: \"sĂŒrĂŒcĂŒ növĂŒ\", \"sĂŒrĂŒcĂŒ nömrəsi\",\"bölmə "
-"nömrəsi\" (məsələn, \"hda\").\n"
-"\n"
-"\n"
-"\"SĂŒrĂŒcĂŒ növĂŒ\" sĂŒrĂŒcĂŒnĂŒz IDE sĂŒrĂŒcĂŒ isə \"hd\"dirSCSI sĂŒrĂŒcĂŒ isə\n"
-"\"sd\"dir.\n"
-"\n"
-"\n"
-"\"SĂŒrĂŒcĂŒ nömrəsi\" həmiƟə \"hd\" və ya \"sd\"dən sonrakı rəqəmdir.IDE "
-"sĂŒrĂŒcĂŒlər ĂŒĂ§ĂŒn:\n"
-"\n"
-"*\"a\" yəni \"birinci IDE idarəcisində ali sĂŒrĂŒcĂŒ\",\n"
-"\n"
-"*\"b\" yəni \"birinci IDE idarəcisində kölə sĂŒrĂŒcĂŒ\",\n"
-"\n"
-"*\"c\" yəni \"ikinci IDE idarəcisində ali sĂŒrĂŒcĂŒ\",\n"
-"\n"
-"*\"d\" yəni \"ikinci IDE idarəcisində kölə sĂŒrĂŒcĂŒ\".\n"
-"\n"
-"\n"
-"SCSI sĂŒrĂŒcĂŒlərində \"a\" nın mənası \"birinci sĂŒrĂŒcĂŒ\",\n"
-"\"b\"nin mənası \"ikinci sĂŒrĂŒcĂŒ\"dĂŒr vs..."
+msgid "No CD device defined!"
+msgstr "Fayl seç"
-#: ../../help.pm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Bu nöqtədə siz Linuks Mandrake yĂŒkləmək ĂŒĂ§ĂŒn bölmələri seçməlisiniz. Əgər "
-"əvvəldən bölmələr var isə (sistemdə əvvəllər qurulu olan GNU/Linuks "
-"bölmələri və ya baƟqa bölmələndirmə vasitələri ilə hazırladığınız bölmələr), "
-"onları seçin və istifadə edin.\n"
-"Yoxsa onları bildirməlisiniz.\n"
-"\n"
-"\n"
-"Bölmələri yaratmaq ĂŒĂ§ĂŒn əvvəlci diski seçməlisiniz.\n"
-"Diski seçmək ĂŒĂ§ĂŒn birinci IDE sĂŒrĂŒcĂŒsĂŒ ĂŒĂ§ĂŒn \"hda\" nı, ikinciyi seçmək ĂŒĂ§ĂŒn "
-"\"hdb\"ni, birinci SCSÄ° sĂŒrĂŒcĂŒsĂŒ ĂŒĂ§ĂŒn ise \"sda\" vs tıqlamalısınız.\n"
-"\n"
-"\n"
-"Seçdiyiniz sĂŒrĂŒcĂŒyə aƟağıdakıları etməyə qadirsiniz:\n"
-"\n"
-" *Hamısını təmizlə: seçili sĂŒrĂŒcĂŒdə bĂŒtĂŒn bölmələri silər.\n"
-"\n"
-"\n"
-" *Avtomatik: SĂŒrĂŒcĂŒnĂŒzdəki boƟ sahədə Ext2 və Swapbölmələrini avtomatik\n"
-"yaradar.\n"
-"\n"
-"\n"
-" *Bölmə cədvəlini qurtar: ZədələnmiƟ bölmə cədvəlinibərpa edər. XahiƟ "
-"edirik\n"
-" diqqətli olun, Ă§ĂŒnkĂŒ bu da iflas edə bilər.\n"
-"\n"
-"\n"
-" *Gəri dön: Ä°stəmədiyiniz seçkilərinizdən geri döndərər.\n"
-"\n"
-"\n"
-" *Yenidən yĂŒklə: BĂŒtĂŒn dəyiƟikliklərinizdən geri dönərbaƟdakı bölmə "
-"cədvəlinə gələr.\n"
-"\n"
-"\n"
-" *Sehirbaz: Bölmələndirməyi bir sehirbaz edər. TəcrĂŒbəsizisəniz bunu "
-"seçin.\n"
-"\n"
-"\n"
-" *Floppy-dən bərpa et: Bölmə cədvəlini əvvəllər flopy-yə qeydetdiniz isə, "
-"bölmə cədvəlini bərpa edin.\n"
-"\n"
-"\n"
-" *Floppy-yə qeyd et: Daha sonradan bərpa etmek ĂŒĂ§ĂŒnbilgiləri floppy-yə qeyd "
-"edin.\n"
-" Bu seçki Ɵiddətlə tövsiyə edilir.\n"
-"\n"
-"\n"
-" *Oldu: Bölmələndirmə bitdiyində, bunu seçərəkdəyiƟikliklərinizi qeyd "
-"edin.\n"
-"\n"
-"\n"
-"Xəbəriniz olsun, istənilən seçkiyə Tab ve AƟağı/Yuxarı oxlarını da iƟlədərək "
-"klaviaturadan idarə edə bilərsiniz.\n"
-"\n"
-"\n"
-"Bölmə seçildiyi zaman bunları iƟlədə bilərsiniz:\n"
-"\n"
-" *Ctrl-c yeni bölmə yaratmaq ĂŒĂ§ĂŒn (boƟ bölmə seçili olduğu zaman)\n"
-"\n"
-" *Ctrl-d bölməni ləğv etmək ĂŒĂ§ĂŒn\n"
-"\n"
-" *Ctrl-m bağlama nöqtəsini göstərmək ĂŒĂ§ĂŒn\n"
-"\n"
-"\n"
-"\n"
-"Əgər PPC kompĂŒterdə qurulum aparırsınızsa, ən az 1 MBlıq balaca bir HFC "
-"'bootstrap' bölməsini yaboot açılÄ±ĆŸ yĂŒkləyicisi ĂŒĂ§ĂŒn seçmək istəyəcəksiniz.\n"
-"Əgər daha çox yeriniz varsa ; məsələn 50 MB, onda bĂŒtĂŒn kernel və ramdisk "
-"əksini təcili açılÄ±ĆŸ halları ĂŒĂ§ĂŒn saxlaya bilərsiniz."
+msgid "Bulgarian (phonetic)"
+msgstr "Ermenicə (fonetik)"
-#: ../../help.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
+msgid "The DHCP start ip"
msgstr ""
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
-msgstr ""
+msgid "256 kB"
+msgstr "256 kB"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Yeni yaradılan bĂŒtĂŒn bölmələr Ɵəkilləndirilməlidir\n"
-"(Ɵəkilləndirmək yəni fayl sistemi yaratmaq - format).\n"
-"\n"
-"\n"
-"Bu arada var olan hazır bölmələri də ĂŒstĂŒndəkiləri silmək ĂŒĂ§ĂŒnyenidən "
-"Ɵəkilləndirmək istəya\n"
-"bilərsiniz.\n"
-"Bunu istəyirsinizsə bu bölmələri də seçməlisiniz.\n"
-"\n"
-"\n"
-"Bunu ağlınızda tutun ki var olan bĂŒtĂŒn bölmələri Ɵəkilləndirmək\n"
-"məcburi deyil.\n"
-"İƟlətim sistəmini əmələ gətirən bölmələri (yəni\n"
-"\"/\", \"usr\" və ya \"var\"ı yenidən Ɵəkilləndirmək ĂŒĂ§ĂŒn\n"
-"seçə bilərsiniz. Verilər olan \"home\"u məsələ toxunulmadan\n"
-"buraxa bilərsiniz.\n"
-"\n"
-"\n"
-"Diqqətli olun. Ɵəkilləndirdiyiniz bölmələrdəki verilər\n"
-"geri gəlməz.\n"
-"\n"
-"\n"
-"ƞəkilləndirməyə hazır isəniz \"Oldu\" dĂŒyməsini tıqlayın.\n"
-"\n"
-"\n"
-"Yeni Linuks Mandrake sisteminizi qurmaq ĂŒĂ§ĂŒn baƟqa bölmə seçmək\n"
-"istəyirsiniz isə \"Ləğv et\" dĂŒyməsinə basın."
+#: ../../any.pm:1
+#, c-format
+msgid "Bootloader main options"
+msgstr "Sistem yĂŒkləyicisi ana seçənəkləri"
-#: ../../help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
msgstr ""
-#: ../../help.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid ""
-"At this point, you need to decide where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space you will\n"
-"have to partition the drive. Basically, partitioning a hard drive consists\n"
-"of logically dividing it to create the space needed to install your new\n"
-"Mandrake Linux system.\n"
-"\n"
-"Because the process of partitioning a hard drive is usually irreversible\n"
-"and can lead to lost data if there is an existing operating system already\n"
-"installed on the drive, partitioning can be intimidating and stressful if\n"
-"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
-"simplifies this process. Before continuing with this step, read through the\n"
-"rest of this section and above all, take your time.\n"
-"\n"
-"Depending on your hard drive configuration, several options are available:\n"
-"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
-"\n"
-" Before choosing this option, please understand that after this\n"
-"procedure, the size of your Microsoft Windows partition will be smaller\n"
-"then when you started. You will have less free space under Microsoft\n"
-"Windows to store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
-"\n"
-" !! If you choose this option, all data on your disk will be deleted. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
-msgstr ""
-"Bu nöqtədə Linuks Mandrakeni sabit diskinizdə haraya quracağınıza\n"
-"qərar verəcəksiniz. Əgər diskiniz boƟ isə və ya bir baƟqa sistem\n"
-"bĂŒtĂŒn yeri doldurmuƟ isə, o zaman diskinizdə Linuks Mandrake ĂŒĂ§ĂŒn\n"
-"yer açmalısınız. Ona görə də diski bölmələndirməlisiniz.\n"
-"Bölmələndirmə əsasən diskinizdə məntiqi sĂŒrĂŒcĂŒlər yaratmaqdan ibarətdir.\n"
-"\n"
-"Ümumiyyətlə bölmələndirmənin təsiri geri dönĂŒlməzdir.Ona görə də\n"
-"bu iƟ çox gərgin və yorucudur. Əgər özĂŒnĂŒzə inanmırsınız isə bu\n"
-"sehirbaz sizə yardım edər. BaƟlamadan əvvəl xahiƟ edirik əl kitabçanıza\n"
-"baxın. Və bu iƟ ĂŒĂ§ĂŒn bir az vaxt ayırın.\n"
-"\n"
-"\n"
-"Sizə ən az 2 bölmə lazımdır. Biri sistemin özĂŒnĂŒ kĂ¶Ă§ĂŒrməsi ĂŒĂ§ĂŒn\n"
-"Digəri isə uydurma yaddaƟ (ya da digər adı ilə Swap) ĂŒĂ§ĂŒn.\n"
-"\n"
-"\n"
-"Əgər diskiniz onsuz da bölĂŒnmĂŒĆŸ isə (əvvəlki sistemden ya da\n"
-"baƟqa bölmələndirmə vasitələri ilə hazırlanmÄ±ĆŸ) quruluƟda\n"
-"sadəcə olaraq o yerləri yĂŒkləmək ĂŒĂ§ĂŒn seçin.\n"
-"\n"
-"\n"
-"Əgər disk bölĂŒnməmiƟ ise, yuxarıdakı sehirbazdan istifadə edə bilərsiniz.\n"
-"Sisteminizin quruluƟundan asılı olaraq mĂŒxtəlif imkanlarınız var:\n"
-"\n"
-"* BĂŒtĂŒn diski sil: Linuks Mandrake qurmaq ĂŒĂ§ĂŒn bĂŒtĂŒn diskinizin\n"
-" ĂŒzərindəki bölmələri silər. Burada diqqətli olun.\n"
-" Sildikləriniz əsla geri gəlməz.\n"
-"\n"
-"\n"
-"* Windows bölməsindəki sahəni istifadə et: Sisteminizdə\n"
-" Microsoft Windows qurulu isə ve bĂŒtĂŒn diski əhatə edir isə\n"
-" Linuks Mandrake ĂŒĂ§ĂŒn bir yer ayırmalısınız. Bunun ĂŒĂ§ĂŒn\n"
-" ya bĂŒtĂŒn diski silməlisiniz (\"BĂŒtĂŒn diski sil\" bax ya da\n"
-" \" Usta modu\" tövsiyələri) ya da yenidən bölmələndirməlisiniz.Bu iƟ heç "
-"bir mə'lumat itkisi olmadan da edilə bilər.Bunun baƟqa adı\n"
-" eyni kompĂŒterdə həm Linuks Mandrake həm də Windows qurulu olmasıdır.\n"
-"\n"
-"\n"
-"t Bu seçkiyə getmədən əvvəl bir Ɵeyi baƟa dĂŒĆŸməlisiniz ki, yenidən "
-"bölmələndirmə ilə sizin Windows bölməsi kiçiləcəkdir.\n"
-" Yə'ni Windows altında daha az disk sahəsinə malik olacaqsınız.\n"
-"\n"
-"\n"
-"* Usta modu: Əgər əllə diski bölmək istəsəniz, bu modu seçin. Diqqətli "
-"olun.\n"
-" Bu mod gĂŒĂ§lĂŒdĂŒr amma bir o qədər də təhlĂŒkəlidir. Diskinizdəki bĂŒtĂŒn "
-"bilgiyi asandlıqla itirə bilərsiniz.\n"
-" TəcrĂŒbəsiz isəniz bunu seçməyin."
+msgid "Tape"
+msgstr "Növ"
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Scanning network..."
+msgstr "Bağlantınız baƟladılır..."
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
msgstr ""
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
-msgstr ""
+msgid "Malaysia"
+msgstr "Malayziya"
-#: ../../help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
-msgstr ""
+msgid "Swiss (French layout)"
+msgstr "Ä°sveçcə (Fransız sırası)"
-#: ../../help.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
-"\n"
-"\n"
-"Test\n"
-"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
-"\n"
-"\n"
-"\n"
-"Options\n"
-"\n"
-" You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
-msgstr ""
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "mkraid iflas etdi (raidtools əksik ola bilər mi?)"
-#: ../../help.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
+msgid "Webcam"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
+msgid "size of the (second level) cpu cache"
msgstr ""
-#: ../../help.pm:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Ä°ndi, açılÄ±ĆŸda avtomatik olaraq baƟlamasını istədiyiniz xidmətləri \n"
-"seçə bilərsiniz. Siçan bir maddənin ĂŒzərina gəldiyində o xidmətin rolunu "
-"açıqlayan\n"
-"kiçik bir baloncuq ortaya çıxacaqdır.\n"
-"\n"
-"Əgər kompĂŒterinizi bir verici olaraq istifadə edəcəksəniz bu addımda tam bir "
-"diqqət ayırmalısınız:\n"
-"mĂŒhtəməldir ki lazımi heç bir xidməti baƟlatmaq istəməzsiniz."
+msgid "Soundcard"
+msgstr "Səs kartı"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
msgstr ""
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
-"\n"
-"When configuring your network, the available connections options are:\n"
-"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
-"simple LAN connection (Ethernet).\n"
-"\n"
-"We will not detail each configuration option - just make sure that you have\n"
-"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
-"from your Internet Service Provider or system administrator.\n"
-"\n"
-"You can consult the ``Starter Guide'' chapter about Internet connections\n"
-"for details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection."
-msgstr ""
+msgid "Level %s\n"
+msgstr "Səviyyə %s\n"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
+msgid "Luxembourg"
+msgstr "LĂŒksemburq"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
+" DrakBackup Daemon Report\n"
"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
msgstr ""
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
-msgstr ""
-
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Yuxarıda sĂŒrĂŒcĂŒnĂŒzdə tapılan Linuks bölmələri sıralanıb\n"
-"Sehirbazın tövsiyələrinə uyun, onlar çox vaxt iƟə yarayır.\n"
-"Əgər bunu istəməsəniz en azından kök bölməsi (\"/\") seçməlisiniz\n"
-"Çox kiçik bölmə seçməyin. yoxsa çox proqram tə'minatı yĂŒkləyə bilməzsəniz.\n"
-"Əgər verilərinizi baƟqa bölmədə tutmaq istəyirsinizsə, ondabir de \"/home\" "
-"bölməsi də yaratmalısınız (birdən çox Linuks\n"
-"bölməniz var isə).\n"
-"\n"
-"\n"
-"Xəbəriniz olsun, hər bölmə aƟağıdakı kimi sıralanıb: \"Ad\", \"Həcm\".\n"
-"\n"
-"\n"
-"\"Ad\" belə kodlanıb: \"sĂŒrĂŒcĂŒ növĂŒ\", \"sĂŒrĂŒcĂŒ mömrəsi\",\n"
-"\"bölmə nömrəsi\" (məsələn \"hda1\").\n"
-"\n"
-"\n"
-"\"SĂŒrĂŒcĂŒ növĂŒ\" əgər sĂŒrĂŒcĂŒnĂŒz IDE sĂŒrĂŒcĂŒdĂŒrsə \"hd\"dirvə SCSI sĂŒrĂŒcĂŒ isə "
-"\"sd\"dir.\n"
-"\n"
-"\n"
-"\"SĂŒrĂŒcĂŒ nömrəsi\" həmiƟə \"hd\" və ya \"sd\"dən sonrakı rəqəmdir.IDE "
-"sĂŒrĂŒcĂŒlər ĂŒĂ§ĂŒn:\n"
-"\n"
-"*\"a\" yəni \"birinci IDE idarəcisində ali sĂŒrĂŒcĂŒ\",\n"
-"\n"
-"*\"b\" yəni \"birinci IDE idarəcisində kölə sĂŒrĂŒcĂŒ\",\n"
-"\n"
-"*\"c\" yəni \"ikinci IDE idarəcisində ali sĂŒrĂŒcĂŒ\",\n"
-"\n"
-"*\"d\" yəni \"ikinci IDE idarəcisində kölə sĂŒrĂŒcĂŒ\".\n"
-"\n"
-"\n"
-"SCSI sĂŒrĂŒcĂŒlərində \"a\" nın mənası \"birinci sĂŒrĂŒcĂŒ\",\n"
-"\"b\"nin mənası \"ikinci sĂŒrĂŒcĂŒ\"dĂŒr vs..."
+msgid "Iran"
+msgstr "Ä°raq"
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
+msgid "Bus"
msgstr ""
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
-msgstr ""
+msgid "Iraq"
+msgstr "Ä°raq"
-#: ../../install2.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "You must also format %s"
-msgstr ""
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr "%s quğusunda dəyəsən bir LAN ĂŒnvan çaxÄ±ĆŸması tapıldı!\n"
-#: ../../install2.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
+msgid "Configuring..."
+msgstr "QuraƟdırılır..."
-#: ../../install_any.pm:1
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The setup has already been done, and it's currently enabled."
+msgstr "QuraƟdırma artıq qurtarıbdır və fəaliyyətdədir."
+
+#: ../../harddrake/v4l.pm:1
#, c-format
msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
msgstr ""
-"Bir xəta oldu. Yeni fayl sisteminin yaradılacağı hökmlĂŒ bir sĂŒrĂŒcĂŒ "
-"tapılmadı. Bu problemin qaynağı ĂŒĂ§ĂŒn avadanlığınızı yoxlayın"
-#: ../../install_any.pm:1 ../../partition_table.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Error reading file %s"
-msgstr "%s faylı oxunurkan xəta oldu"
+msgid "Password (again)"
+msgstr "Parol (təkrar)"
-#: ../../install_any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
+msgid "Search installed fonts"
msgstr ""
-"Bu saxlanmÄ±ĆŸ paketlər seçkisini iƟlətmək ĂŒĂ§ĂŒn qurulumu ``linux "
-"defcfg=floppy''ilə baƟladın."
-#: ../../install_any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "Bu floppi FAT Ɵəklində deyildir"
+msgid "Venezuela"
+msgstr "Venezuela"
-#: ../../install_any.pm:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "%s sĂŒrĂŒcĂŒsĂŒnə FAT ƟəkilləndirilmiƟ bir disket taxın"
+msgid "IP address"
+msgstr "IP ĂŒnvanı"
-#: ../../install_any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Can't use broadcast with no NIS domain"
-msgstr "NİS domeyni olmadan translasiya iƟlədilə bilməz"
+msgid "Choose the sizes"
+msgstr "BöyĂŒklĂŒklərini seçin"
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
+"List of data corrupted:\n"
"\n"
-"Do you really want to remove these packages?\n"
msgstr ""
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "No"
-msgstr "Xeyr"
-
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Yes"
-msgstr "Bəli"
-
-#: ../../install_any.pm:1
-#, fuzzy, c-format
msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
msgstr ""
-"bu vericiləri seçdiniz: %s\n"
-"\n"
-"\n"
-"bu vericilər əsasən fəallaƟdırılır. Onların heç bir təhlĂŒkəsizlik\n"
-"problemləri yoxdur, amma bə'zi xətalar tapıla bilər. Belə olsa, mĂŒmĂŒkĂŒn olan "
-"ən yaxın zamanda gĂŒncəlləməlisiniz.\n"
-"\n"
-"\n"
-"Bu vericiləri qurmaq istəyirsiniz?\n"
-#: ../../install_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "System configuration"
-msgstr "QuraƟdırma"
+msgid "Choose another partition"
+msgstr "Yeni bölmə yarat"
-#: ../../install_gtk.pm:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "System installation"
-msgstr "SILO Qurulumu"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Bringing down the network"
-msgstr "ƞəbəkə dayandırılır"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Bringing up the network"
-msgstr "ƞəbəkə fəallaƟdırılır"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Bölmə cədvəli növĂŒ: %s"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX bölmə sehirbazı bu yolu tapdı:"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "I can't find any room for installing"
-msgstr "Artıq bölmə əlavə edilə bilməz"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Ä°ndi %s sabit diskinizi bölmələndirə bilərsiniz\n"
-"İƟinizi bitirdiyinizdə `w' ilə qeyd etməyi unutmayın"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use fdisk"
-msgstr "Fdisk istifadə et"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Custom disk partitioning"
-msgstr "Hazırkı disk bölmələndirməsi"
+msgid "Current user"
+msgstr "İstifadəçini qəbul et"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"%s bölĂŒməsinin böyĂŒklĂŒyĂŒ dəyiƟdirildikdən sonra bu bölmədəki bĂŒtĂŒn "
-"mə'lumatlar silinəcəkdir"
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Username"
+msgstr "Ä°stifadəçi adı"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
+msgid "Left \"Windows\" key"
msgstr ""
-"Sizin birdən çox diskiniz var, linux qurmaq ĂŒĂ§ĂŒn hansını istifadə "
-"edəcəksiniz?"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Erase entire disk"
-msgstr "BĂŒtĂŒn diski sil"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Remove Windows(TM)"
-msgstr "\"Windows\"u sil"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr "FAT bölməsi yoxdur ya da loopback ĂŒĂ§ĂŒn lazımi yer buraxılmayıb"
+msgid "dhcpd Server Configuration"
+msgstr "Yerli ƞəbəkə QuraƟdırılması"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT böyĂŒklĂŒyĂŒ dəyiƟdirilməsi bacarılmadı: %s"
+msgid "Guyana"
+msgstr "Quyana"
-#: ../../install_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Resizing Windows partition"
-msgstr "Fat fayl sistemi ucları hesaplanır"
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr ""
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Resizing"
-msgstr "BöyĂŒklĂŒyĂŒ dəyiƟdirilir"
+msgid "Remove a module"
+msgstr "Modulu çıxart"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "partition %s"
-msgstr "bölmə %s"
+msgid "Password"
+msgstr "Parol"
-#: ../../install_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Hansı sektora daĆŸÄ±maq istəyirsiniz?"
-
-#: ../../install_interactive.pm:1
-#, fuzzy, c-format
msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"DİQQƏT!\n"
+"Arguments: (max, inactive=-1)\n"
"\n"
-"DrakX \"Windows\" disk bölmənizin böyĂŒklĂŒyĂŒnĂŒ dəyiƟdirəcək. Bu iƟ \n"
-"tehlĂŒkəli ola bilər. AƟina deyil isəniz qurulumdan çıxın və \"Windows\" \n"
-"altında \"Scandisk\" (lazım gələrsə \"defrag\" da) proqramını çalÄ±ĆŸdırın. "
-"Ardından quruluma \n"
-"davam edin. Verilərinizin yedəyini almağı da unutmayın!"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
msgstr ""
-"Sizin Windows bölĂŒmĂŒ çox dağınıqdır. DaxiƟ edirik, əvvəlcə birləƟdirin "
-"(defraq)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Windows bölməsindəki boƟ sahəni iƟlət"
+msgid "Advanced Configuration"
+msgstr "Yerli ƞəbəkə QuraƟdırılması"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+msgid "Scanning on your HP multi-function device"
msgstr ""
-"FAT tədqiqatçımız sizin bölĂŒmləri iƟlədə bilmir,\n"
-"bu xəta oldu: %s"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Hansı bölmənin böyĂŒklĂŒyĂŒnĂŒ dəyiƟdirəcəksiniz?"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Windows bölməsindəki boƟ sahəni iƟlət"
-
-#: ../../install_interactive.pm:1
-#, fuzzy, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr "FAT bölməsi yoxdur ya da loopback ĂŒĂ§ĂŒn lazımi yer buraxılmayıb"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Swap sahəsi böyĂŒklĂŒyĂŒ (Mb): "
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Root partition size in MB: "
-msgstr "Kök (root) bölməsi böyĂŒklĂŒyĂŒ (Mb): "
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Choose the sizes"
-msgstr "BöyĂŒklĂŒklərini seçin"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Linuks4Win'i qurmaq ĂŒĂ§ĂŒn hansı disk bölməsini istifadə edəcəksiniz?"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Loopback ĂŒĂ§ĂŒn Windows bölməsini iƟlət"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "There is no existing partition to use"
-msgstr "Bölmə cədvəli qurtarılmağa çalÄ±ĆŸÄ±lır"
-
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Use existing partitions"
-msgstr "Var olan bölmələri iƟlədimmi"
+msgid "Root"
+msgstr "Kök"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Yeni bölmələr ĂŒĂ§ĂŒn boƟ sahə yoxdur"
+msgid "Choose an existing RAID to add to"
+msgstr "Əlavə etmək ĂŒĂ§ĂŒn mövcud bir RAID seçin"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Use free space"
-msgstr "BoƟ sahəni istifadə et"
-
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
-#, fuzzy, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Bir swap sahəsinə ehtiyacınız var"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "TĂŒrkcə (mĂŒasir \"Q\" klaviatura)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You don't have a swap partition.\n"
-"\n"
-"Continue anyway?"
+msgid "Lilo message not found"
msgstr ""
-"Bir swap sahəniz yoxdur\n"
-"Davam edim?"
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
msgstr ""
-"Bir root disk bölĂŒmĂŒna ehtiyacınız var.\n"
-"Bunun ĂŒĂ§ĂŒn istər mövcud bir disk bölĂŒmĂŒ ĂŒzərina tıqlayın, \n"
-"ya da yeni birini baƟdan yaradın. Sonra \"Bağlama \n"
-"Nöqtəsi\"nə gəlin va burayı '/' olaraq dəyiƟdirin."
+"/usr/include/linux/{autoconf,version}.h ĂŒĂ§ĂŒn \n"
+"/boot-da avtomatik çəkirdək baƟlığı yaradılması."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Sisteminizdaki bə'zi avadanlıqlar iƟləməsi ĂŒĂ§ĂŒn dĂŒzgĂŒn sĂŒrĂŒcĂŒlərə ehtiyac "
-"duyar.\n"
-"Bunun haqqında %s də/a lazımi malumatları tapa bilərsiniz"
+msgid "if needed"
+msgstr "lazım olarsa"
-#: ../../install_messages.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Təbriklər, quruluƟ bitdi.\n"
-"Cdrom və disketi çıxartdıqtan sonra Enter'ə basaraq kompĂŒterinizi \n"
-"yenidən baƟladın. Linuks Mandrake'nin bu buraxılÄ±ĆŸÄ±ndakı yamaqlar haqqında \n"
-"mə'lumat almaq ĂŒĂ§ĂŒn http://www.mandrakelinux.com ĂŒnvanından Errata'ya "
-"baxın.\n"
-"Sisteminizin qurğuları haqqında daha geniƟ bilgiyi Linuks Mandrake \n"
-"Ä°stifadəçi Kitabcığında tapa bilərsiniz."
+msgid "Restore Failed..."
+msgstr "Fayldan geri çağır"
-#: ../../install_messages.pm:1
-#, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _jazz drives"
+msgstr "Avtomatik təsbit iƟlət"
-#: ../../install_messages.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
+"Description:\n"
"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
"\n"
-"Warning\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
"\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a Ɵəbəkə. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
"\n"
"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
+msgstr ""
#: ../../install_messages.pm:1
#, c-format
@@ -3238,3486 +857,5226 @@ msgstr ""
"Paris - France.\n"
"For any question on this document, please contact MandrakeSoft S.A. \n"
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Entering step `%s'\n"
-msgstr "BaƟlanğıc addımı `%s'\n"
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Current interface configuration"
+msgstr "İnternet qurğuları"
+
+#: ../../printer/data.pm:1
#, c-format
-msgid "Help"
-msgstr "Yardım"
+msgid "LPD - Line Printer Daemon"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
+#, c-format
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
+msgstr ""
+"\n"
+"ISA kartınız var isə sonrakı ekrandakı qiymətlər doğru olmalıdır.\n"
+"\n"
+"PCMCIA kartınız var isə kartınızın irq və ya io'sunu bilməlisiniz.\n"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "not configured"
-msgstr "yenidən quraƟdır"
+msgid "Do not print any test page"
+msgstr "Sınaq səhifəsi çap edilir..."
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configure"
-msgstr "Qur"
+msgid "Gurmukhi"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Go on anyway?"
-msgstr "Yenə də davam edək?"
+msgid "Force No APIC"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "There was an error installing packages:"
-msgstr "Paketlər qurulurkən bir xəta oldu:"
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr "Bu parol çox sadədir (en az %d xarakter boyunda olmalıdır)"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone.pm:1
+#, fuzzy, c-format
+msgid "[keyboard]"
+msgstr "Klaviatura"
+
+#: ../../network/network.pm:1
#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Paketləri istərkən bir xəta oldu:"
+msgid "FTP proxy"
+msgstr "FTP vəkil verici"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Install List"
+msgstr "Sistemi qur"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr "Fayldan geri çağır"
+
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Show only for the selected day"
+msgstr "Təkcə bu gĂŒnĂŒnkĂŒnĂŒ göstər"
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"Change your Cd-Rom!\n"
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Cd-Romu dəyiƟdirin!\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
"\n"
-"\"%s\" adlı Cd-Romu sĂŒrĂŒcĂŒnĂŒzə taxın və OLDU'ya basın.\n"
-"Əgər Cd-Rom əlinizdə deyilsə bu Cd-Rom'dan qurmamaq ĂŒĂ§ĂŒn Ä°MTÄ°NA ET'ə basın."
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Refuse"
-msgstr "Rədd Et"
+msgid "512 kB"
+msgstr "512 kB"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Accept"
-msgstr "Qəbul Et"
+msgid "Logs"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Installing package %s"
-msgstr "%s paketi qurulur"
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "%d packages"
-msgstr "%d paket"
+msgid "<control>N"
+msgstr "<control>N"
-#: ../../install_steps_gtk.pm:1
-#, fuzzy, c-format
-msgid "No details"
-msgstr "Ətraflı"
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "What kind of card do you have?"
+msgstr "Hansı növ kartınız var?"
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Details"
-msgstr "Ətraflı"
+msgid "<control>O"
+msgstr "<control>O"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "XahiƟ edirik gözləyin, qurulum hazırlanır"
+msgid "Security"
+msgstr "TəhlĂŒkəsizlik"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Time remaining "
-msgstr "Qalan mĂŒddət"
+msgid ""
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Estimating"
-msgstr "Təxmini olaraq hesaplanır"
+msgid "<control>Q"
+msgstr "<control>Q"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Unknown"
+msgstr "Ümumi"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Installing"
-msgstr "Qurulur"
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Qurmaq istədiyiniz paketləri seçin"
+msgid "Network Configuration"
+msgstr "ƞəbəkə quraƟdırılması"
-#: ../../install_steps_gtk.pm:1
-#, fuzzy, c-format
-msgid "Minimal install"
-msgstr "Qurulumdan çıx"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>S"
+msgstr "<control>S"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/isdn.pm:1
#, fuzzy, c-format
-msgid "Updating package selection"
-msgstr "Paket seçkilərini saxla"
+msgid ""
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
+msgstr ""
+"BĂŒtĂŒn dĂŒnya \n"
+" D-Channel'lə xaric (kiralıq xətlər)"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s must be a number!"
+msgstr ""
+
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Load/Save on floppy"
-msgstr "Disketə qeyd et"
+msgid "Notice"
+msgstr "NoVÄ°deo"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "<- Previous"
-msgstr "<- Əvvəlki"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Install"
-msgstr "Qurulum"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Show automatically selected packages"
-msgstr "Avtomatik seçili paketləri göstər"
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Bu paketi sistemdən çıxarda bilməzsiniz. Yenilənməlidir"
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "What type of partitioning?"
+msgstr "Nəcə bölməlandirmə istəyirsən?"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"file list sent by FTP: %s\n"
+" "
msgstr ""
-"Bu paket yenilənməlidir\n"
-"Sistemdən çıxarmaq mövzusunda ciddisiniz?"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "Bu paketi sistemdən çıxarda bilməzsınız. Artıq qurulmuƟdur."
+msgid "Interface"
+msgstr "Ara ĂŒz"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Bu lazımlı bir paketdir, sistemdən çıxardıla bilməz"
+msgid ""
+"Options Description:\n"
+"\n"
+" - Backup System Files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Backup User Files: \n"
+"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
+"\n"
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane. To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
+"\n"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "You can't select/unselect this package"
-msgstr "Bu paketi seçə bilməzsiniz/sistemdən çıxarda bilməzsınız"
+msgid ""
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
+"\n"
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../modules/parameters.pm:1
+#, fuzzy, c-format
+msgid "comma separated strings"
+msgstr "Bölmə Ɵəkilləndirilməsi"
+
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "The following packages are going to be removed"
-msgstr "AƟağıdakı paketlər sistemdən silinəcəklər"
+msgid "These are the machines from which the scanners should be used:"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Messages"
+msgstr "ismarıclar"
+
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "The following packages are going to be installed"
-msgstr "AƟağıdakı paketlər qurulacaqdır"
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "POP and IMAP Server"
+msgstr "Verici"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Bu paketi seçə bilməzsiniz, Ă§ĂŒnki qurmaq ĂŒĂ§ĂŒn yer çatmır."
+msgid "Mexico"
+msgstr "Meksika"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model stepping"
+msgstr "ƞəkilləndirilir"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Importance: %s\n"
-msgstr "Əhəmiyyət: %s\n"
+msgid "Rwanda"
+msgstr "Rvanda"
-#: ../../install_steps_gtk.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Size: %d KB\n"
-msgstr "BöyĂŒklĂŒyĂŒ: %d KB\n"
+msgid "Do you have any %s interfaces?"
+msgstr "Heç %s ara ĂŒzĂŒ var?"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Version: %s\n"
-msgstr "BuraxılÄ±ĆŸ: %s\n"
+msgid "Switzerland"
+msgstr "İsveçrə"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Name: %s\n"
-msgstr "Ad: %s\n"
+msgid "Brunei Darussalam"
+msgstr "Bruney DarĂŒssəlim"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Bad package"
-msgstr "Xətalı paket"
+msgid "Remote lpd Printer Options"
+msgstr "Uzaq Çap Edici (lpd) Seçənəkləri"
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
-msgid "Other"
-msgstr "Digər"
+msgid ""
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
+"\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Ümumi böyĂŒklĂŒk: %d / %d Mb"
+msgid "Configure Internet Access..."
+msgstr "İnternet keçiƟini Qur..."
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Norway"
+msgstr "Norveçcə"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "Next ->"
-msgstr "Sonrakı ->"
+msgid "Danish"
+msgstr "Danimarka dili"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Individual package selection"
-msgstr "Fərdi paket seçkisi"
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
+msgstr ""
+"AçılÄ±ĆŸda XFree və konsolda numlock dĂŒyməsini\n"
+"avtomatik olaraq aç."
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Package Group Selection"
-msgstr "Paket Qrup Seçkisi"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr "XahiƟ edirik bu kompĂŒter ĂŒĂ§ĂŒn IP qurğularını girin"
-#: ../../install_steps_gtk.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
msgstr ""
-"Sizin sisteminizin qaynaqları çatÄ±ĆŸmır. Qurulum ərzində problem yaƟaya "
-"bilərsiniz\n"
-"Bu baƟ verərsə mətn aracılığı ilə qurulumu sınamalısınız. Bunun ĂŒĂ§ĂŒn "
-"dəCDROMdan baƟlatdığınız zaman,\n"
-" 'F1'ə basın və 'text' yazaraq enter'ə basın."
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Save packages selection"
-msgstr "Paket seçkilərini saxla"
+msgid "Processors"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Automated"
-msgstr "AvtomatlaƟdırılmÄ±ĆŸ"
+msgid "Bulgaria"
+msgstr "Bolqarıstan"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "No NIC selected!"
+msgstr "Bağlı deyil"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Replay"
-msgstr "Təkrarla"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr "Svalbard və Jan Mayen Adaları"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
msgstr ""
-"Avtomatik qurulum disketi hazırlanması seçilərsə,\n"
-"bĂŒtĂŒn sabit disk mə'lumatı daxil ediləcəkdir!!\n"
-"(yə'ni baƟqa sistemi də qura bilmək ĂŒĂ§ĂŒn).\n"
-"\n"
-"Bu qurulumu takrar etmək istəyə bilərsiniz axı.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Generate auto install floppy"
-msgstr "Avtomatik qurulum disketi hazırlanır"
+msgid "partition %s is now known as %s"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Reboot"
-msgstr "Kök"
+msgid "Backup Other files..."
+msgstr "Xətalı yedəkləmə faylı"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Bə'zi bölmələr bitdi.\n"
-"\n"
-"Həqiqətən də çıxmaq istəyirsiniz?"
+msgid "SMB server IP"
+msgstr "SMB verici IP"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Creating auto install floppy..."
-msgstr "Avtomatik qurulum disketi hazırlanır"
+msgid "Congo (Kinshasa)"
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "%s sĂŒrĂŒcĂŒsĂŒnə boƟ bir disket yerləƟdirin"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "%s sĂŒrĂŒcĂŒsĂŒnĂŒn bölmə cədvəli diskə yazılacaq!"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing HPOJ package..."
+msgstr "%s paketi qurulur"
+
+#: ../../any.pm:1
#, c-format
msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
msgstr ""
-"Siz Open FÄ°rmware açılÄ±ĆŸ avadanlığınızı açılÄ±ĆŸ yĂŒkləyicisini\n"
-"fəallaƟdırmaq ĂŒĂ§ĂŒn dəyiƟdirməli ola bilərsiniz. Əmr-Seçənək-O-F dĂŒymələrini\n"
-" yenidən baƟlarkən basın və bunları girin:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Sonra da bunları yazın: shut-down\n"
-"Bir sonrakı baƟlanğıcda açılÄ±ĆŸ yĂŒkləyicisi sətirini görməlisiniz."
+"XĂŒsusi bir açılÄ±ĆŸ disketi, Linuks sisteminizin normal bir sistem yĂŒkləyiciyə "
+"lĂŒzĂŒm\n"
+"olmadan açılmasına imkan verər. Əgə sisteminizə lilo (ya da grub) "
+"qurmayacaqsanız,\n"
+"ya da baƟqa bir əməliyyat sistemi liloyu silərsa ya da lilo "
+"avadanlığınızlaiƟləməzsə\n"
+"bu disket sizə yardımçi olacaqdır. Sonradan Mandrake qurtarma disketi "
+"rəsmini\n"
+"istifadə edərək də bu disket yaradıla bilər.\n"
+"AçılÄ±ĆŸ disketi yaratmaq istəyirsiniz?\n"
+"AçılÄ±ĆŸ disketi yaratmaq istəyirsinizsə, birinci disket sĂŒrĂŒcĂŒyədisklet "
+"yerləƟdirin\n"
+"və \"OLDU\" basın.\n"
+"%s"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "AçılÄ±ĆŸ yĂŒkləyicisi qurulumu iflas etdi. Xəta:"
+msgid ", USB printer \\#%s"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Installing bootloader"
-msgstr "Sistem yĂŒkləyicini qur"
+msgid "Latvian"
+msgstr "Yeri"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
+msgid "monthly"
msgstr ""
-"aboot qurulumunda xata, \n"
-"ilk disk bölməsini yox etsə belə yenə də qurulmasını istəyirsiniz?"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Do you want to use aboot?"
-msgstr "aboot istifadə etmək istəyirsiniz?"
+msgid "Module name"
+msgstr "Modul adı"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Start at boot"
+msgstr "AçılÄ±ĆŸda baƟladılır"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+msgid "Use Incremental Backups"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Preparing bootloader..."
-msgstr "AçılÄ±ĆŸ yĂŒkləyici hazırlanır"
+msgid "First sector of drive (MBR)"
+msgstr "Diskin ilk sektoru (MBR)"
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Domain Admin Password"
+msgid "Joystick"
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Domain Admin User Name"
-msgstr "Sahə(domain) adı"
+#: ../../lang.pm:1
+#, c-format
+msgid "El Salvador"
+msgstr "Elsalvador"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Windows Domain"
-msgstr "NIS sahəsi"
+#: ../../any.pm:1 ../../help.pm:1
+#, c-format
+msgid "Use Unicode by default"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Authentication Windows Domain"
-msgstr "Tanıtma"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "the module of the GNU/Linux kernel that handles the device"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Trying to rescue partition table"
+msgstr "Bölmə cədvəli qurtarılmağa cəhd edilir"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s must be an integer number!"
+msgstr ""
+
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+"Entries you'll have to fill:\n"
+"%s"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "NIS Server"
-msgstr "NIS Verici"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "TəkmilləƟdirmə iƟi baƟlaya bilmir !!!\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "NIS Domain"
-msgstr "NIS sahəsi"
+msgid "Name: "
+msgstr "Ad: "
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "16 million colors (24 bits)"
+msgstr "16 milyon rəng (24 bits)"
+
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Authentication NIS"
-msgstr "NIS"
+msgid "Allow all users"
+msgstr "İstifadəçi əlavə et"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/08-store.pl:1
+#, c-format
+msgid "The official MandrakeSoft Store"
+msgstr ""
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Resizing"
+msgstr "BöyĂŒklĂŒyĂŒ dəyiƟdirilir"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Cable connection"
+msgstr "Kabel bağlantısı"
+
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "NIS"
-msgstr "NIS istifadə et"
+msgid "User"
+msgstr "Ä°stifadəçi adı"
-#: ../../install_steps_interactive.pm:1
+#: ../../fsedit.pm:1
#, fuzzy, c-format
-msgid "LDAP Server"
-msgstr "Verici"
+msgid ""
+"I can't read the partition table of device %s, it's too corrupted for me :(\n"
+"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
+"The other solution is to not allow DrakX to modify the partition table.\n"
+"(the error is %s)\n"
+"\n"
+"Do you agree to loose all the partitions?\n"
+msgstr ""
+"Bölmə cədvəlinizi oxuya bilmirəm, dəyəsən biraz xarab olub:-(\n"
+"Xarab olmuƟ bolmələri dĂŒzəltməyə çalÄ±ĆŸacam.\n"
+"Amma bĂŒtĂŒn mə'lumatlar itəcəkdir.\n"
+"BaƟqa bir yol isə DrakXin bölmə cədvəllərini yoxlamasını "
+"passivləƟdirməkdir.\n"
+"(xəta %s)\n"
+"\n"
+"BĂŒtĂŒn bölmələri itirmək istəyirsiniz?\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LDAP Base dn"
+msgid "Do new backup before restore (only for incremental backups.)"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Authentication LDAP"
-msgstr "Tanıtma"
+msgid "Printer on parallel port \\#%s"
+msgstr "Çap Edici Ev sahibi"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Name"
+msgstr "Ad: "
+
+#: ../../raid.pm:1
#, c-format
-msgid "LDAP"
-msgstr ""
+msgid "mkraid failed"
+msgstr "mkraid iflas etdi"
#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Button 3 Emulation"
+msgstr "DĂŒymə 3 emulyasiyası"
+
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Local files"
-msgstr "Yerli Çap Edici"
+msgid "Sending files..."
+msgstr "Fayla qeyd et"
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Authentication"
-msgstr "Tanıtma"
+msgid "Israeli (Phonetic)"
+msgstr "Ä°srail (Fonetik)"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr "Bu parol çox sadədir (en az %d xarakter boyunda olmalıdır)"
+msgid "access to rpm tools"
+msgstr ""
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "No password"
-msgstr "Parolsuz"
+msgid "edit"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Set root password"
-msgstr "Root parolunu qur"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "You must choose/enter a printer/device!"
+msgstr "Çap Edici avadanlığı URI"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
+msgid "Permission problem accessing CD."
msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Services: %d activated for %d registered"
+msgid "Phone number"
+msgstr "Telefon nömrəsi"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Services"
-msgstr "avadanlıq"
+msgid "Printer name, description, location"
+msgstr "Çap Edici Bağlantısı"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (broadcast)"
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "System"
-msgstr "Sistem modu"
+msgid ""
+"Please choose the\n"
+"media for backup."
+msgstr "XahiƟ edirik istifadə ĂŒĂ§ĂŒn bir dil seçin."
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "%s on %s"
-msgstr "Qapı"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "Use Xinerama extension"
+msgstr "Xinerama ifadələrini iƟlət"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Bootloader"
-msgstr "Ä°stifadə ediləcək AçılÄ±ĆŸ idarəcisi"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Loopback"
+msgstr "Loopback"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Boot"
-msgstr "Kök"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid ""
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
+msgstr ""
+"DĂŒzgĂŒn mkbootdisk aparıla bilmir: \n"
+" %s \n"
+" %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakxtv:1
#, fuzzy, c-format
-msgid "disabled"
-msgstr "passivləƟdir"
+msgid "West Europe"
+msgstr "Avropa"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "activated"
-msgstr "Fəal"
+#: ../../standalone.pm:1
+#, c-format
+msgid ""
+"[OPTIONS] [PROGRAM_NAME]\n"
+"\n"
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Firewall"
-msgstr "Verici, Firewall/Ruter"
+msgid "Harddrake2 version %s"
+msgstr "Sabit disk seçkisi"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Security"
-msgstr "TəhlĂŒkəsizlik"
+msgid "Copying %s"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Security Level"
-msgstr "TəhlĂŒkəsizlik səviyyəsinin quraƟdırılması"
+msgid "Choose color"
+msgstr "Monitorunuzu seçin"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Network"
-msgstr "ƞəbəkə ara ĂŒzĂŒ"
+#: ../../lang.pm:1
+#, c-format
+msgid "Dominican Republic"
+msgstr "Dominikan Respublikası"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Swaziland"
+msgstr "Svaziland"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Set-UID"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Network & Internet"
-msgstr "ƞəbəkə ara ĂŒzĂŒ"
+msgid "Please check if you are using CDRW media"
+msgstr "XahiƟ edirik bir bölmə ĂŒstĂŒnə tıqlayın"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Graphical interface"
-msgstr "X ilə AçılÄ±ĆŸ"
+msgid ""
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
+msgstr ""
+"Linuks Mandrakeni yĂŒkləmak ĂŒĂ§ĂŒn sĂŒrĂŒcĂŒyĂŒ seçin.\n"
+"Diqqətli olun, sĂŒrĂŒcĂŒdəki bĂŒtĂŒn mə'lumatlar silinəcək\n"
+"və geri gəlməyəcək."
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hardware"
+msgid " on parallel port \\#%s"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "TV card"
-msgstr "TV kartı"
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "%c ve %c duymeleri ile isıqlandırılmıs girisleri sece bilersiniz"
-#: ../../install_steps_interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
+msgid "Generic 2 Button Mouse"
+msgstr "Sıravi 2 DĂŒyməli Siçan"
-#: ../../install_steps_interactive.pm:1
+#: ../../lvm.pm:1
#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgid "Remove the logical volumes first\n"
+msgstr "Məntiqi ciltləri birinci olaraq sil\n"
+
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
+#, c-format
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "Isaretli secenek %d saniye icinde sistemi acacaq."
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid ""
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "BaƟqa var?"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet access"
+msgstr "İnternet imkanı"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Sound card"
-msgstr "Səs kartı"
+msgid ""
+"y coordinate of text box\n"
+"in number of characters"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote CUPS server"
-msgstr "Uzaq CUPS vericisi"
+msgid ""
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "No printer"
-msgstr "Çap Edicisiz"
+msgid "Enabling servers..."
+msgstr "Xidmətlər fəallaƟdırılır..."
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer"
-msgstr "Çap Edici"
+msgid "Printing test page(s)..."
+msgstr "Sınaq səhifəsi çap edilir..."
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Mouse"
-msgstr "Siçan"
+msgid "There is already a partition with mount point %s\n"
+msgstr "Onsuz da bağlama nöqtəsi %s olan bir bölmə var\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At this point, you need to decide where you want to install the Mandrake\n"
+"Linux operating system on your hard drive. If your hard drive is empty or\n"
+"if an existing operating system is using all the available space you will\n"
+"have to partition the drive. Basically, partitioning a hard drive consists\n"
+"of logically dividing it to create the space needed to install your new\n"
+"Mandrake Linux system.\n"
+"\n"
+"Because the process of partitioning a hard drive is usually irreversible\n"
+"and can lead to lost data if there is an existing operating system already\n"
+"installed on the drive, partitioning can be intimidating and stressful if\n"
+"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
+"simplifies this process. Before continuing with this step, read through the\n"
+"rest of this section and above all, take your time.\n"
+"\n"
+"Depending on your hard drive configuration, several options are available:\n"
+"\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
+"\n"
+" Before choosing this option, please understand that after this\n"
+"procedure, the size of your Microsoft Windows partition will be smaller\n"
+"then when you started. You will have less free space under Microsoft\n"
+"Windows to store your data or to install new software.\n"
+"\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
+"\n"
+" !! If you choose this option, all data on your disk will be deleted. !!\n"
+"\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
+"\n"
+" !! If you choose this option, all data on your disk will be lost. !!\n"
+"\n"
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
+msgstr ""
+"Bu nöqtədə Linuks Mandrakeni sabit diskinizdə haraya quracağınıza\n"
+"qərar verəcəksiniz. Əgər diskiniz boƟ isə və ya bir baƟqa sistem\n"
+"bĂŒtĂŒn yeri doldurmuƟ isə, o zaman diskinizdə Linuks Mandrake ĂŒĂ§ĂŒn\n"
+"yer açmalısınız. Ona görə də diski bölmələndirməlisiniz.\n"
+"Bölmələndirmə əsasən diskinizdə məntiqi sĂŒrĂŒcĂŒlər yaratmaqdan ibarətdir.\n"
+"\n"
+"Ümumiyyətlə bölmələndirmənin təsiri geri dönĂŒlməzdir.Ona görə də\n"
+"bu iƟ çox gərgin və yorucudur. Əgər özĂŒnĂŒzə inanmırsınız isə bu\n"
+"sehirbaz sizə yardım edər. BaƟlamadan əvvəl xahiƟ edirik əl kitabçanıza\n"
+"baxın. Və bu iƟ ĂŒĂ§ĂŒn bir az vaxt ayırın.\n"
+"\n"
+"\n"
+"Sizə ən az 2 bölmə lazımdır. Biri sistemin özĂŒnĂŒ kĂ¶Ă§ĂŒrməsi ĂŒĂ§ĂŒn\n"
+"Digəri isə uydurma yaddaƟ (ya da digər adı ilə Swap) ĂŒĂ§ĂŒn.\n"
+"\n"
+"\n"
+"Əgər diskiniz onsuz da bölĂŒnmĂŒĆŸ isə (əvvəlki sistemden ya da\n"
+"baƟqa bölmələndirmə vasitələri ilə hazırlanmÄ±ĆŸ) quruluƟda\n"
+"sadəcə olaraq o yerləri yĂŒkləmək ĂŒĂ§ĂŒn seçin.\n"
+"\n"
+"\n"
+"Əgər disk bölĂŒnməmiƟ ise, yuxarıdakı sehirbazdan istifadə edə bilərsiniz.\n"
+"Sisteminizin quruluƟundan asılı olaraq mĂŒxtəlif imkanlarınız var:\n"
+"\n"
+"* BĂŒtĂŒn diski sil: Linuks Mandrake qurmaq ĂŒĂ§ĂŒn bĂŒtĂŒn diskinizin\n"
+" ĂŒzərindəki bölmələri silər. Burada diqqətli olun.\n"
+" Sildikləriniz əsla geri gəlməz.\n"
+"\n"
+"\n"
+"* Windows bölməsindəki sahəni istifadə et: Sisteminizdə\n"
+" Microsoft Windows qurulu isə ve bĂŒtĂŒn diski əhatə edir isə\n"
+" Linuks Mandrake ĂŒĂ§ĂŒn bir yer ayırmalısınız. Bunun ĂŒĂ§ĂŒn\n"
+" ya bĂŒtĂŒn diski silməlisiniz (\"BĂŒtĂŒn diski sil\" bax ya da\n"
+" \" Usta modu\" tövsiyələri) ya da yenidən bölmələndirməlisiniz.Bu iƟ heç "
+"bir mə'lumat itkisi olmadan da edilə bilər.Bunun baƟqa adı\n"
+" eyni kompĂŒterdə həm Linuks Mandrake həm də Windows qurulu olmasıdır.\n"
+"\n"
+"\n"
+"t Bu seçkiyə getmədən əvvəl bir Ɵeyi baƟa dĂŒĆŸməlisiniz ki, yenidən "
+"bölmələndirmə ilə sizin Windows bölməsi kiçiləcəkdir.\n"
+" Yə'ni Windows altında daha az disk sahəsinə malik olacaqsınız.\n"
+"\n"
+"\n"
+"* Usta modu: Əgər əllə diski bölmək istəsəniz, bu modu seçin. Diqqətli "
+"olun.\n"
+" Bu mod gĂŒĂ§lĂŒdĂŒr amma bir o qədər də təhlĂŒkəlidir. Diskinizdəki bĂŒtĂŒn "
+"bilgiyi asandlıqla itirə bilərsiniz.\n"
+" TəcrĂŒbəsiz isəniz bunu seçməyin."
+
+#: ../../lang.pm:1
#, c-format
-msgid "Timezone"
-msgstr "Vaxt Dilimi"
+msgid "Ukraine"
+msgstr "Ukrayna"
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Application:"
+msgstr "Tanıtma"
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Keyboard"
-msgstr "Klaviatura"
+msgid "External ISDN modem"
+msgstr "Xarici ISDN kart"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Summary"
-msgstr "MĂŒndəricat"
+msgid "if set to yes, report check result by mail."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Your choice? (default %s) "
+msgstr "Seçkiniz? (əsas %s) "
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
+msgstr ""
+
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "NTP Server"
-msgstr "NIS Verici"
+msgid " / Region"
+msgstr "Reyunion"
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Automatic time synchronization (using NTP)"
+msgid ""
+"The classic bug sound tester is to run the following commands:\n"
+"\n"
+"\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
+"\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
+"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
+"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
+"\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"\n"
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Avadanlıq saatınız GMT-yə göra quruludur mu?"
+msgid ""
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
+"\n"
+msgstr ""
+"Sınaq səhifəsi çap edici vasitəsinə göndərildi.\n"
+"Çap edicinin iƟləməsi ĂŒĂ§ĂŒn bir az vaxt keçər.\n"
+"Çap vəziyyəti:\n"
+"%s\n"
+"\n"
+"DĂŒz mĂŒ iƟləyir?"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Which is your timezone?"
-msgstr "Sisteminiz hansı məqsədlə istifadə ediləcək?"
+msgid "daily"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Would you like to try again?"
-msgstr "Bir çap edici qurmaq istəyirsiniz?"
+msgid "and one unknown printer"
+msgstr "Çap Edicisiz"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, fuzzy, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Fork edilə bilmir: %s"
+msgid "Ireland"
+msgstr "Ä°zlandiya dili"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Əks ĂŒnvanına bağlantı qurulur"
+msgid "kernel version"
+msgstr "çəyirdək buraxılÄ±ĆŸÄ±"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Paketleri almaq ĂŒĂ§ĂŒn bir əks ĂŒnvanı seçin"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid " Restore Configuration "
+msgstr "ƞəbəkə quraƟdırılması"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, fuzzy, c-format
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr "Əks ĂŒnvanına bağlantı qurulur"
+msgid "Is this the correct setting?"
+msgstr "Doğrudur?"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
+"You will now set up your Internet/network connection. If you wish to\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
+"When configuring your network, the available connections options are:\n"
+"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
+"simple LAN connection (Ethernet).\n"
"\n"
-"Do you want to install the updates ?"
+"We will not detail each configuration option - just make sure that you have\n"
+"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
+"from your Internet Service Provider or system administrator.\n"
+"\n"
+"You can consult the ``Starter Guide'' chapter about Internet connections\n"
+"for details about the configuration, or simply wait until your system is\n"
+"installed and use the program described there to configure your connection."
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "%s sĂŒrĂŒcĂŒsĂŒnə boƟ bir disket yerləƟdirin"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "%s sĂŒrĂŒcĂŒsĂŒnə bir disket taxın"
+msgid "Wizard Configuration"
+msgstr "Yerli ƞəbəkə QuraƟdırılması"
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Post-install configuration"
-msgstr "Qurulum sonrası qurğular"
+msgid "Autoprobe"
+msgstr "Avtomatik yoxla"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
+msgid "Backup system files..."
msgstr ""
-"%s paketi qurulur\n"
-"%d%%"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Preparing installation"
-msgstr "Qurulum hazırlanır"
+msgid "Can't use broadcast with no NIS domain"
+msgstr "NİS domeyni olmadan translasiya iƟlədilə bilməz"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Removing printer \"%s\"..."
+msgstr "CUPS sĂŒrĂŒcĂŒ datası oxunur..."
+
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "\"%s\" adlı Cd-Rom"
+msgid "drakfloppy"
+msgstr "drakfloppy"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
+"Please indicate where the auto_install.cfg file is located.\n"
+"\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
+"\n"
msgstr ""
-"AƟağıdakı siyahıdakı bĂŒtĂŒn CD'lərə sahib isəniz, OLDU'ya basın.\n"
-"CD'lərin heç birinə sahib deyilsəniz, Ä°MTÄ°NA ET'ə basın.\n"
-"CD'lərdən bə'ziləi əksik isə, onları seçili vəziyyətdən çıxardıb OLDU'ya "
-"basın."
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "All"
-msgstr "Hamısı"
+msgid "information level that can be obtained through the cpuid instruction"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
+msgid "Peru"
+msgstr "Peru"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid " on device: %s"
+msgstr "Siçan avadanlığı: %s\n"
+
+#: ../../install_interactive.pm:1
#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr ""
+msgid "Remove Windows(TM)"
+msgstr "\"Windows\"u sil"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "With X"
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
msgstr ""
+"X Font Vericisini açılÄ±ĆŸda iƟə salar (Bu, XFree icrası ĂŒĂ§ĂŒn məcburidir)."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Type of install"
+msgid "Select the font file or directory and click on 'Add'"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Selected size is larger than available space"
-msgstr "Seçili böyĂŒklĂŒk var olandan daha böyĂŒkdĂŒr"
+msgid "Madagascar"
+msgstr "Madaqaskar"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "%s sĂŒrĂŒcĂŒsĂŒnə bir disket taxın"
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Urpmi"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Cron not available yet as non-root"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Loading from floppy"
-msgstr "Disketdən geri çağır"
+msgid "System"
+msgstr "Sistem modu"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, fuzzy, c-format
-msgid "Package selection"
-msgstr "Paket Qrup Seçkisi"
+msgid "Do you want to use this feature?"
+msgstr "aboot istifadə etmək istəyirsiniz?"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Save on floppy"
-msgstr "Disketə qeyd et"
+msgid "Arabic"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Load from floppy"
-msgstr "Disketdən geri çağır"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
+"\n"
+"- Options:\n"
+msgstr "Seçənəklər"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Password required"
+msgstr "Parol"
+
+#: ../../common.pm:1
#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+msgid "%d minutes"
msgstr ""
-"Sisteminizdə qurulum ya da gĂŒncəlləmə ĂŒĂ§ĂŒn lazımi boƟ yer yoxdur(%d > %d)"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Looking for available packages..."
-msgstr "Mövcud olan paketlər axtarılır."
+msgid "Graphics card: %s"
+msgstr "Ekran kartı: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "GĂŒncəllənəcək paketlar tapılır"
+msgid "WebDAV transfer failed!"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Looking at packages already installed..."
-msgstr "Bu paketi sistemdən çıxarda bilməzsınız. Artıq qurulmuƟdur."
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "XFree configuration"
+msgstr "XFree quraƟdırılması"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "Mövcud olan paketlər axtarılır."
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Choose action"
+msgstr "Monitorunuzu seçin"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "Qurulumu bitirmək ĂŒĂ§ĂŒn lazımi sahə yoxdur, xahiƟ edirik əlavə edin"
+msgid "French Polynesia"
+msgstr "Fransız Poloneziyası"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Check bad blocks?"
-msgstr "Xətalı bloklar sınansınmı?"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "OKI 4w və uyğun Windows çap edicilərini dəstəklə."
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "ƞəkilləndiriləcək disk bölmələrini seçin"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr "ALSA səs sistemini (Advanced Linux Sound Architecture) baƟlat"
-#: ../../install_steps_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Bölmə cəvəlindəki dəyiƟikliklərin daxil olması ĂŒĂ§ĂŒn kompĂŒterinizi yenidən "
-"baƟlatmalısınız."
+msgid "Installing driver for %s card %s"
+msgstr "%s kartı (%s) ĂŒĂ§ĂŒn sĂŒrĂŒcĂŒ yĂŒklənir"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Choose the mount points"
-msgstr "Bağlama nöqtələrini seçin"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Enable Server"
+msgstr "Databeyz"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Bağlama nöqtələri ĂŒĂ§ĂŒn bölmələr daranır"
+msgid "Ukrainian"
+msgstr "Ukrayna dili"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No partition available"
-msgstr "uyğun bölmə tapılmadı"
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
+msgstr ""
#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Configuring IDE"
-msgstr "IDE qapıları qurulur"
+#, fuzzy, c-format
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "%s sĂŒrĂŒcĂŒsĂŒnə bir disket taxın"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "IDE"
-msgstr "IDE"
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Local network(s)"
+msgstr "Ɵəbəkə kartı tapılmadı"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "PCMCIA kartlar qurulur..."
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
+msgstr "\"Windows\"u sil"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Button 3 Emulation"
-msgstr "DĂŒymə 3 emulyasiyası"
+msgid "Firewire controllers"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Button 2 Emulation"
-msgstr "DĂŒymə 2 emulyasiyası"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
+"\n"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
+msgstr ""
+"LILO (Linuks YĂŒkləyici) və Grub açılÄ±ĆŸ sistem yĂŒkləyiciləridir: sistemi "
+"Linuks\n"
+"ya da kompĂŒterinizdə olan baƟqa bir əməliyyatiyle aça bilərlər.\n"
+"Əsasən bu digər əməliyyat sistemləri doğru bir Ɵəkilde təsbit edilib "
+"açılÄ±ĆŸa\n"
+"qurula bilərlər. Əgər bir problem olarsa, buradan əllə əlavə edilə "
+"bilərlər.\n"
+"Parametrlər mövzusunda diqqətli olun."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Buttons emulation"
-msgstr "DĂŒymə emulyasiyası"
+msgid "System mode"
+msgstr "Sistem modu"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
+msgstr ""
+"NetWare çap edicidən yekun almaq ĂŒĂ§ĂŒn, NetWare vericisinin adı və çap "
+"edici \n"
+"növbəsi adı ilə istifadəçi adı va parolu verilməlidir."
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Netmask:"
+msgstr "Netmask"
+
+#: ../../any.pm:1
#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Siçanınızın bağlı olduğu serial Qapıyı seçin."
+msgid "Append"
+msgstr "Sonuna əlavə et"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mouse Port"
-msgstr "Siçan Qapısı"
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Please choose your type of mouse."
-msgstr "XahiƟ edirik siçanınızın növĂŒnĂŒ seçin."
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
+"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
+"\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
+"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
+"\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Encryption key for %s"
-msgstr "Parollar uyğun gəlmir"
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid ""
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
+"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
+"\n"
+"It also provides a much higher API than OSS.\n"
+"\n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
+msgstr ""
#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Upgrade %s"
-msgstr "GĂŒncəlləmə"
+#, c-format
+msgid ""
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
+"\n"
+"You may prefer to replay the installation.\n"
+msgstr ""
+"Avtomatik qurulum disketi hazırlanması seçilərsə,\n"
+"bĂŒtĂŒn sabit disk mə'lumatı daxil ediləcəkdir!!\n"
+"(yə'ni baƟqa sistemi də qura bilmək ĂŒĂ§ĂŒn).\n"
+"\n"
+"Bu qurulumu takrar etmək istəyə bilərsiniz axı.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Bu bir qurulum mu, yoxsa gĂŒncəlləməmidir?"
+msgid "Network printer \"%s\", port %s"
+msgstr "ƞəbəkə Çap Edicisi (soket) "
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Install/Upgrade"
-msgstr "Qurulum/GĂŒncəlləmə"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid ""
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
+msgstr "Sizi Yerli ƞəbəkəyə bağlayacaq adapteri seçin"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "BĂŒtĂŒn mövcud klaviaturaların siyahısı"
+msgid "OK to restore the other files."
+msgstr ""
#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "Please choose your keyboard layout."
msgstr "Klaviatura quruluƟunu seçiniz."
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Quit"
-msgstr "Çıx"
+msgid "Printer Device URI"
+msgstr "Çap Edici avadanlığı URI"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "License agreement"
-msgstr "Lisenziya sözləƟməsi"
+msgid "Not erasable media!"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "An error occurred"
-msgstr "Bir xəta oldu"
+msgid "Terminal-based"
+msgstr "Terminal əsaslı"
-#: ../../install_steps_newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+msgid "Installing a printing system in the %s security level"
msgstr ""
-" <Tab>/<Alt-Tab> irəli/geri | <BoƟluq> iƟarətlə | <F12> sonrakı ekran"
-#: ../../install_steps_newt.pm:1
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "The user name is too long"
+msgstr "Bu istifadəçi adı artıq vardır"
+
+#: ../../any.pm:1
#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Linuks-Mandrake Qurulumu %s"
+msgid "Other OS (windows...)"
+msgstr "Digər sistemlər (windows...)"
-#: ../../install_steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No floppy drive available"
-msgstr "Disket sĂŒrĂŒcĂŒ yoxdur"
+msgid "WebDAV remote site already in sync!"
+msgstr ""
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Reading printer database..."
+msgstr "CUPS sĂŒrĂŒcĂŒ datası oxunur..."
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Welcome to %s"
-msgstr "%s Sisteminə XoƟgəlmiƟsiniz"
+msgid "Generate auto install floppy"
+msgstr "Avtomatik qurulum disketi hazırlanır"
-#: ../../install_steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
msgstr ""
-"Bəzi paketlər doğru olaraq qurulumu bitirmədi.\n"
-"cdrom sĂŒrĂŒcĂŒnĂŒz ya da cdromunuz dĂŒzgĂŒn iƟləmir.\n"
-"Əvvəldən Linuks qurulu bir sistemdə \"rpm -qpl Mandrake/RPMS/*.rpm\"'yi\n"
-"istifadə edərək Cd-Rom'u yoxlayın.\n"
-#: ../../install_steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Duplicate mount point %s"
-msgstr "%s bağlama nöqtəsini çoxalt"
+msgid "Somalia"
+msgstr "Somali"
-#: ../../install_steps.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
+msgid "No open source driver"
+msgstr ""
+
+#: ../../security/level.pm:1
+#, fuzzy, c-format
msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
msgstr ""
-"Bir xəta oldu, fəqət necə dĂŒzəldiləcəyini bilmirəm.\n"
-"Davam edin, riski sizə aitdir!"
+"Biz dördĂŒncĂŒ səviyyə haqlarını verdik və sistem xarici bağlantılara qarĆŸÄ± "
+"tamamilə qapalıdır.\n"
+"TəhlĂŒkəsizlik səviyyəsi indi ən ĂŒstdədir."
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please wait"
-msgstr "XahiƟ edirik gözləyin"
+msgid "Nicaragua"
+msgstr "Nikaraqua"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ok"
-msgstr "Oldu"
+msgid "New Caledonia"
+msgstr "Yeni Kaledoniya"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
-#, c-format
-msgid "Finish"
-msgstr "Qurtar"
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "European protocol (EDSS1)"
+msgstr "Avropa (EDSS1)"
-#: ../../interactive.pm:1 ../../standalone/draksec:1
+#: ../../any.pm:1
#, c-format
-msgid "Basic"
-msgstr ""
+msgid "Video mode"
+msgstr "Ekran modu"
-#: ../../interactive.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Please enter your email address below "
+msgstr "XahiƟ edirik təkrar sınayın"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Advanced"
-msgstr "Ətraflı"
+msgid "Oman"
+msgstr "Oman"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Remove"
-msgstr "Uzaq Çap Edici"
+msgid "Network Monitoring"
+msgstr "ƞəbəkə quraƟdırılması"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Modify"
-msgstr "TəkmilləƟdir"
+msgid "SunOS"
+msgstr "SunOS"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "New size in MB: "
+msgstr "MB cinsindən böyĂŒklĂŒk: "
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Add"
-msgstr "Əlavə et"
+msgid "Partition table type: %s\n"
+msgstr "Bölmə cədvəli növĂŒ: %s\n"
-#: ../../interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Choose a file"
-msgstr "Monitorunuzu seçin"
+msgid "Authentication Windows Domain"
+msgstr "Tanıtma"
#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
-msgstr ""
+msgid "US keyboard"
+msgstr "Amerikan (US) klaviaturası"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Right \"Windows\" key"
-msgstr ""
+msgid "Buttons emulation"
+msgstr "DĂŒymə emulyasiyası"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Left \"Windows\" key"
+msgid ", network printer \"%s\", port %s"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "\"Menu\" key"
+msgid ""
+"\n"
+"Drakbackup activities via tape:\n"
+"\n"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Alt and Shift keys simultaneously"
+msgid ""
+"\n"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Sending Speed:"
+msgstr "Fayla qeyd et"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Ctrl and Alt keys simultaneously"
+msgid "Halt bug"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Mail alert configuration"
+msgstr "Yerli ƞəbəkə quraƟdırılması"
+
+#: ../../lang.pm:1
#, c-format
-msgid "CapsLock key"
-msgstr ""
+msgid "Tokelau"
+msgstr "Tokelo"
#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Bosnian"
+msgstr "Estoniya dili"
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Release: "
+msgstr "XahiƟ edirik gözləyin"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Connection speed"
+msgstr "Bağlantı növĂŒ:"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Control and Shift keys simultaneously"
+msgid ""
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Both Shift keys simultaneously"
+msgid "Namibia"
+msgstr "Namibiya"
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Database Server"
+msgstr "Databeyz"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "special capacities of the driver (burning ability and or DVD support)"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Right Alt key"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "ƞəkilləndirilmiƟ RAID md%d-yə disk bölməsi əlavə edilə bilinmədi"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
+"Sizin kartınızın 3D sĂŒr'ətləndirmə dəstəyi ola bilər, amma sadecə olaraq "
+"XFree %s\n"
+"ilə dĂŒzgĂŒn iƟləyər.\n"
+"DÄ°QQƏT! BU SINAQ MƏRHƏLƏSINDƏDIR VƏ KOMPÜTERÄ°NÄ°Z DONDURA BILƏR.\n"
+"Sizin kartınıza XFree %s tərəfindən dəstək verilir ve bu 2D ĂŒĂ§ĂŒn daha yaxĆŸÄ± "
+"bir seçki olar."
-#: ../../keyboard.pm:1
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "Yugoslavian (latin)"
-msgstr "Yugoslavca (latın/kiril)"
+msgid "Please wait, setting security options..."
+msgstr "XahiƟ edirik gözləyin, qurulum hazırlanır"
-#: ../../keyboard.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vyetnam dili \"numeric row\" QWERTY"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "US keyboard (international)"
-msgstr "Amerikan (US) klaviaturası (beynəlmiləl)"
+msgid "Launch the graphical environment when your system starts"
+msgstr "AçılÄ±ĆŸda X-Window sistemini baƟlat"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "US keyboard"
-msgstr "Amerikan (US) klaviaturası"
+msgid "hourly"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "UK keyboard"
-msgstr "İngiliz (UK) klaviaturası"
+msgid " Successfuly Restored on %s "
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ukrainian"
-msgstr "Ukrayna dili"
+msgid "Making printer port available for CUPS..."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "TĂŒrkcə (mĂŒasir \"Q\" klaviatura)"
+msgid "Antigua and Barbuda"
+msgstr "Antiq və Barbuda"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "TĂŒrkcə (ənənəvi \"F\" klaviatura)"
+msgid ""
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
+msgstr ""
#: ../../keyboard.pm:1
+#, c-format
+msgid "Spanish"
+msgstr "Ä°spanca"
+
+#: ../../services.pm:1
#, fuzzy, c-format
-msgid "Tajik keyboard"
-msgstr "Thai klaviatura"
+msgid "Start"
+msgstr "Hal:"
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Thai keyboard"
-msgstr "Thai klaviatura"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "Ermenicə (yazı maĆŸÄ±nı)"
+msgid "Configuring applications..."
+msgstr "Çap Edicini Qur"
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr ""
+msgid "Normal modem connection"
+msgstr "Normal modem təsbiti"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Serbian (cyrillic)"
-msgstr "Azərbaycanca (kiril)"
+msgid "File Selection"
+msgstr "Paket Qrup Seçkisi"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakca (QWERTY)"
+msgid ""
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+" tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+" standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakca (QWERTZ)"
+msgid "CUPS"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Slovenian"
-msgstr "Slovencə"
+msgid "Run config tool"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Swedish"
-msgstr "İsveçcə"
+msgid "Bootloader installation"
+msgstr "AçılÄ±ĆŸ yĂŒkləyici quruluƟu"
-#: ../../keyboard.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Russian (Yawerty)"
-msgstr "Rusca (Yawerty)"
+msgid "Root partition size in MB: "
+msgstr "Kök (root) bölməsi böyĂŒklĂŒyĂŒ (Mb): "
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Russian"
-msgstr "Rusca"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "Bu lazımlı bir paketdir, sistemdən çıxardıla bilməz"
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Romanian (qwerty)"
-msgstr "Rusca (Yawerty)"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Etherboot ISO image is %s"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, fuzzy, c-format
-msgid "Romanian (qwertz)"
-msgstr "Rusca (Yawerty)"
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"named (BIND) verici adlarını IP ĂŒnvanlarına çevirən\n"
+"Sahə Adı Vericisidir(DNS)."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Canadian (Quebec)"
-msgstr "Fransızca (Kanada/Quebec)"
+msgid "Disconnect..."
+msgstr "Bağlantını Kəs..."
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Portuguese"
-msgstr "Portuqalca"
+msgid "Saint Lucia"
+msgstr "MĂŒqəddəs Lusiya"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Report"
+msgstr "Qapı"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Polyakca (QWERTZ sırası)"
+msgid "Palau"
+msgstr "Palau"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Polyakca (QWERTY sırası)"
+msgid "level"
+msgstr "səviyyə"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Norwegian"
-msgstr "Norveçcə"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Dutch"
-msgstr "Hollandiya dili"
+msgid "Package Group Selection"
+msgstr "Paket Qrup Seçkisi"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Maltese (US)"
+msgid "Restore Via Network Protocol: %s"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Maltese (UK)"
+msgid "You can configure each parameter of the module here."
msgstr ""
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Azərbaycanca (kiril)"
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Choose the resolution and the color depth"
+msgstr "Rezolyusiya və rəng dərinliyini seçin"
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Myanmar (Burmese)"
+msgid "Emulate third button?"
+msgstr "3 dĂŒymə emulasiyası"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid ""
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Macedonian"
-msgstr "Makedoniya dili"
+msgid "Mount"
+msgstr "Bağla"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Creating auto install floppy"
+msgstr "Avtomatik qurulum disketi hazırlanır"
+
+#: ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Install updates"
+msgstr "Sistemi qur"
+
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Malayalam"
+msgid "text box height"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Latvian"
-msgstr "Yeri"
+msgid "State"
+msgstr "Hal:"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litvanya dili \"Fonetik\" QWERTY"
+msgid "Be sure a media is present for the device %s"
+msgstr "%s avadanlığında medya olduğundan əmin olun"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litvanya dili \"number row\" QWERTY"
+msgid "Enable multiple profiles"
+msgstr "Birdən artıq profilə icazə ver"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litvanya dili AZERTY (yeni)"
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litvaniya dili AZERTY (köhnə)"
+msgid "Local printer"
+msgstr "Yerli Çap Edici"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Files Restored..."
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Laotian"
-msgstr "Yeri"
+msgid "Package selection"
+msgstr "Paket Qrup Seçkisi"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Latin American"
-msgstr "Latın Amerika dili"
+msgid "Mauritania"
+msgstr "Mavritaniya"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Korean keyboard"
-msgstr "Koreya klaviaturası"
+msgid ""
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
+"\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
+"\n"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Japanese 106 keys"
-msgstr "Yaponca 106 dĂŒyməli"
+msgid ""
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Inuktitut"
-msgstr ""
+msgid "All primary partitions are used"
+msgstr "BĂŒtĂŒn birinci bölmələr istifadədədir"
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Italian"
-msgstr "Ä°talyanca"
+msgid ""
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
+msgstr ""
+"Bu edildikdən sonra Xdən çıxmağınızı tövsiyyə edirik, yoxsa\n"
+"verici adı xəsarətləri meydana gələ bilər."
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Icelandic"
-msgstr "Ä°zlandiya dili"
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr "Texniki avadanlığın açılÄ±ĆŸda avtomatik təsbiti və qurulması."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Installation Server Configuration"
+msgstr "Yerli ƞəbəkə QuraƟdırılması"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Iranian"
-msgstr "Farsca"
+msgid "Configuring IDE"
+msgstr "IDE qapıları qurulur"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Network functionality not configured"
+msgstr "Monitor qurulmayıb"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Configure module"
+msgstr "Siçan qurğuları"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "Ä°srail (Fonetik)"
+msgid "Cocos (Keeling) Islands"
+msgstr "Kokos Adası"
-#: ../../keyboard.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnecting from the Internet "
+msgstr "İnternetə bağlan"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Israeli"
-msgstr "Ä°srail"
+msgid "You'll need to reboot before the modification can take place"
+msgstr "Yeni qurğuların fəallaƟmağı ĂŒĂ§ĂŒn sistemi yenidən baƟlatmalısınız"
-#: ../../keyboard.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Croatian"
-msgstr "Xırvatca"
+msgid "Provider phone number"
+msgstr "Ä°XM telefon nömrəsi"
-#: ../../keyboard.pm:1
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Host %s"
+msgstr "Ev sahibi adı"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Hungarian"
-msgstr "Macarca"
+msgid "Armenia"
+msgstr "Ermənistan"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Gurmukhi"
-msgstr ""
+msgid "Fiji"
+msgstr "Fici"
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Gujarati"
+msgid ""
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Greek"
-msgstr "Yunanca"
+msgid "Second floppy drive"
+msgstr "Ä°kinci disket sĂŒrĂŒcĂŒ"
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "GĂŒrcĂŒ dili (\"Latın\" sırası)"
+msgid "About Harddrake"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "GĂŒrcĂŒ dili (\"Rus\" sırası)"
+msgid "Drive capacity"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "French"
-msgstr "Fransızca"
+msgid ""
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
+msgstr ""
+"Disket sĂŒrĂŒcĂŒyə bir disket yerləƟdirin\n"
+"Bu disketdəki bĂŒtĂŒn mə'lumatlar yox olacaqdır"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Finnish"
-msgstr "Fincə"
+msgid "Size: %s"
+msgstr "BöyĂŒklĂŒyĂŒ: %s"
#: ../../keyboard.pm:1
#, c-format
-msgid "Spanish"
-msgstr "Ä°spanca"
+msgid "Control and Shift keys simultaneously"
+msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Estonian"
-msgstr "Estoniya dili"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "secondary"
+msgstr "%d saniyə sonra çıxılacaq"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (US)"
+msgid "View Backup Configuration."
+msgstr "ƞəbəkə quraƟdırılması"
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norveçcə)"
+msgid "if set to yes, report check result to syslog."
+msgstr ""
-#: ../../keyboard.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
+msgid "No password"
+msgstr "Parolsuz"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Danish"
-msgstr "Danimarka dili"
+msgid "Nigeria"
+msgstr "Nigeriya"
-#: ../../keyboard.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Devanagari"
+msgid "There is no existing partition to use"
+msgstr "Bölmə cədvəli qurtarılmağa çalÄ±ĆŸÄ±lır"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
+msgstr "Siseminizdə Ɵəbəkə adapteri yoxdur!"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
msgstr ""
+"Soket çap edicidən yekun almaq ĂŒĂ§ĂŒn, çap edicinin ev sahibi adını ve "
+"mĂŒmkĂŒnsə, qapısının nömrəsini verməlisiniz."
-#: ../../keyboard.pm:1
-#, c-format
-msgid "German (no dead keys)"
-msgstr "Almanca (ölĂŒ dĂŒymələr olmasın)"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Hard drive information"
+msgstr "Sabit disk seçkisi"
#: ../../keyboard.pm:1
#, c-format
-msgid "German"
-msgstr "Almanca"
+msgid "Russian"
+msgstr "Rusca"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Czech (QWERTY)"
-msgstr "Çex dili (QWERTY)"
+msgid "Jordan"
+msgstr "Ä°ordaniya"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Hide files"
+msgstr "mkraid iflas etdi"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Auto-detect printers connected to this machine"
+msgstr "Uzaq Çap Edici"
+
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Czech (QWERTZ)"
-msgstr "Çex dili (QWERTZ)"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Swiss (French layout)"
-msgstr "Ä°sveçcə (Fransız sırası)"
+msgid "Sorry, no floppy drive available"
+msgstr "BaÄŸÄ±ĆŸlayın, disket sĂŒrĂŒcĂŒ yoxdur"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Swiss (German layout)"
-msgstr "Ä°sveçcə (Alman sırası)"
+msgid "Bolivia"
+msgstr "Boliviya"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Belarusian"
-msgstr "Belarusca"
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Bosnian"
-msgstr "Estoniya dili"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Bad package"
+msgstr "Xətalı paket"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazilya dili (ABNT-2)"
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Bulgarian (BDS)"
-msgstr "Bulqarca"
+msgid "DrakSec Basic Options"
+msgstr "Seçənəklər"
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "Ermenicə (fonetik)"
+#: ../../standalone/draksound:1
+#, c-format
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program. Just type \"sndconfig\" in a console."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Romania"
+msgstr "Ruminıya"
+
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Bengali"
-msgstr "fəallaƟdır"
+msgid "choose device"
+msgstr "AçılÄ±ĆŸ avadanlığı"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Belgian"
-msgstr "Belçika dili"
+msgid "Canada"
+msgstr "Kanada"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "Azərbaycanca (latın)"
+msgid "Remove from LVM"
+msgstr "LVMdən ayır"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Arabic"
-msgstr ""
+msgid "Timezone"
+msgstr "Vaxt Dilimi"
#: ../../keyboard.pm:1
#, c-format
-msgid "Armenian (phonetic)"
-msgstr "Ermenicə (fonetik)"
+msgid "German"
+msgstr "Almanca"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Armenian (typewriter)"
-msgstr "Ermenicə (yazı maĆŸÄ±nı)"
+msgid "Next ->"
+msgstr "Sonrakı ->"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Armenian (old)"
-msgstr "Ermenicə (köhnə) "
+msgid ""
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Albanian"
-msgstr "Farsca"
+msgid ""
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
+msgstr ""
+"\n"
+"Bəlkə də bu bir SĂŒrĂŒcĂŒ bölməsidir.\n"
+"Onda bunu ele beləcə buraxın.\n"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Polish"
-msgstr "Polyakca"
+msgid "Guinea-Bissau"
+msgstr "Qvineya Bissau"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Dvorak"
-msgstr "Dvorak"
+msgid "Horizontal refresh rate"
+msgstr "ÜfĂŒqi yeniləmə sĂŒr'əti"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Zimbabwe"
-msgstr "Zimbabve"
+msgid ""
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
+msgstr ""
+"Bu disk bölməsi loopback ĂŒĂ§ĂŒn istifadə edildiyindən ötrĂŒ bağlanma "
+"nöqtəsindən ayrıla bilinmir.\n"
+"Əvvəlcə loopback-ı ləğv edin."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Zambia"
-msgstr "Zambiya"
+msgid ""
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
+msgstr ""
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "South Africa"
-msgstr "Cənubi Afrika"
+msgid "USB controllers"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, fuzzy, c-format
-msgid "Serbia"
-msgstr "serial"
+msgid "What norm is your TV using?"
+msgstr "ISDN bağlantınızın növĂŒ nədir?"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Mayotte"
-msgstr "Mayot"
+msgid "Type:"
+msgstr "Növ: "
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Yemen"
-msgstr "Yəmən"
+msgid "Share name"
+msgstr "PaylaƟdırma adı"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Samoa"
-msgstr "Samoa"
+msgid "enable"
+msgstr "fəallaƟdır"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Wallis and Futuna"
-msgstr "Vallis və Futuna Adaları"
+msgid ""
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
+msgstr "Əks ĂŒnvanına bağlantı qurulur"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Vanuatu"
-msgstr "Vanuatu"
+msgid ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
+msgstr ""
+"ƞəbəkənin yenidən baƟladılması sırasında xəta oldu: \n"
+"\n"
+"%s"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Vietnam"
-msgstr "Vyetnam"
+msgid "Remove the loopback file?"
+msgstr "Loopback faylı Ɵəkilləndirilir: %s"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Virgin Adaları (ABƞ)"
+msgid "Selected size is larger than available space"
+msgstr "Seçili böyĂŒklĂŒk var olandan daha böyĂŒkdĂŒr"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Virgin Islands (British)"
-msgstr "Virgin Adaları (Britaniya)"
+msgid "NCP server name missing!"
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Venezuela"
-msgstr "Venezuela"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Please choose your country."
+msgstr "XahiƟ edirik siçanınızın növĂŒnĂŒ seçin."
-#: ../../lang.pm:1
-#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "MĂŒqəddəs Vinsent və Qrenadin"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Hard Disk Backup files..."
+msgstr "Xətalı yedəkləmə faylı"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Vatican"
+msgid "Laotian"
msgstr "Yeri"
#: ../../lang.pm:1
#, c-format
-msgid "Uzbekistan"
-msgstr "Özbəkistan"
+msgid "Samoa"
+msgstr "Samoa"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Uruguay"
-msgstr "Uruqvay"
+msgid ""
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
+msgstr ""
+"rstat protokolu bir Ɵəbəkədəkı istifadəçilərin o Ɵəbəkədəkı hər hansı bir\n"
+"kompĂŒter haqqındakı qabiliyyət ölĂ§ĂŒləri ala bilmələrinə imkan verər."
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "BirləƟmiƟ ƞtatlar yanı Kiçik Adalar"
+msgid "Re-generating list of configured scanners ..."
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Uganda"
-msgstr "Uqanda"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Scanner"
+msgstr "Ekran kartınızı seçin"
-#: ../../lang.pm:1
-#, c-format
-msgid "Ukraine"
-msgstr "Ukrayna"
+#: ../../Xconfig/test.pm:1
+#, fuzzy, c-format
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr "Diqqət: Bu qrafika kartı ilə ediləcək sınaq təhlĂŒkəlidir"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Tanzania"
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr ""
+"Ä°stifadəçi adında sadacə kiçik hərflər, rəqəmlər, `-' və `_' xarakterləri "
+"ola bilər"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Taiwan"
-msgstr "Tayland"
+msgid "Menudrake"
+msgstr "Usta"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Tuvalu"
-msgstr "Tuvalu"
+msgid "Welcome To Crackers"
+msgstr "Krakerlərə xoƟgəlmiƟsiniz"
-#: ../../lang.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Trinidad və Tobaqo"
+msgid "Module options:"
+msgstr "Modul seçənəkləri:"
-#: ../../lang.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Turkey"
-msgstr "TĂŒrkiyə"
+msgid "Secure your networks with the Multi Network Firewall"
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Tonga"
-msgstr "Tonqa"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Go on without configuring the network"
+msgstr "ƞəbəkə Qurğuları"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Tunisia"
-msgstr "Tunis"
+msgid "Abort"
+msgstr "Dayandır"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Turkmenistan"
-msgstr "TĂŒrkmənistan"
+msgid "No password prompt on %s at port %s"
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "East Timor"
-msgstr "ƞərqi Timor"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "XahiƟ edirik qurmaq istədiyiniz paketləri seçin."
-#: ../../lang.pm:1
-#, c-format
-msgid "Tokelau"
-msgstr "Tokelo"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Usage of remote scanners"
+msgstr "BoƟ sahəni istifadə et"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Tajikistan"
-msgstr "Tacikistan"
+msgid "\t-CDROM.\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Thailand"
-msgstr "Tayland"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
+msgstr ""
+"Sizin Windows bölĂŒmĂŒ çox dağınıqdır. DaxiƟ edirik, əvvəlcə birləƟdirin "
+"(defraq)"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Togo"
-msgstr "Toqo"
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak (Norveçcə)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "French Southern Territories"
-msgstr "Cənubi Fransız Sahələri"
+msgid "Hard Disk Backup Progress..."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Chad"
-msgstr "Çad"
+msgid "Unable to fork: %s"
+msgstr "Fork edilə bilmir: %s"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "TĂŒrk və Kaykos Adaları"
+msgid "Type: "
+msgstr "Növ: "
-#: ../../lang.pm:1
-#, c-format
-msgid "Swaziland"
-msgstr "Svaziland"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "<-- Edit Client"
+msgstr "DHCP Alıcısı"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Syria"
-msgstr "Surinam"
+msgid "no fonts found"
+msgstr "Ɵəbəkə kartı tapılmadı"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "El Salvador"
-msgstr "Elsalvador"
+msgid "Mouse"
+msgstr "Siçan"
-#: ../../lang.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Sao Tome and Principe"
-msgstr "Sao Tome və Prinsip"
+msgid "not enough room in /boot"
+msgstr "/boot içində lazımi yer yoxdur"
-#: ../../lang.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Suriname"
-msgstr "Surinam"
+msgid "Choosing an arbitratry driver"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Somalia"
-msgstr "Somali"
+msgid "Host name"
+msgstr "Ev sahibi adı"
#: ../../lang.pm:1
#, c-format
-msgid "Senegal"
-msgstr "Seneqal"
+msgid "Liechtenstein"
+msgstr "LixtenƟteyn"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "San Marino"
-msgstr "San Marino"
+msgid "the color of the progress bar"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Sierra Leone"
-msgstr "Siera Lione"
+msgid "Suppress Fonts Files"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Slovakia"
-msgstr "Slovakiya"
+msgid "Add to RAID"
+msgstr "RAIDə əlavə et"
-#: ../../lang.pm:1
-#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Svalbard və Jan Mayen Adaları"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
+"Burada yaboot ĂŒĂ§ĂŒn həm baƟqa əməliyyat sistemləri, həm alternativ "
+"kernellər,\n"
+" ya da təcili yardım açılÄ±ĆŸ əksləri əlavə edə bilərsiniz.\n"
+"\n"
+"\n"
+"BaƟqa OSlər ĂŒĂ§ĂŒn giriƟin mənası ad və kök Ă§Ä±ÄŸÄ±rından ibarətdir.\n"
+"\n"
+"\n"
+"Linuks ĂŒĂ§ĂŒn mĂŒhtəməl giriƟlər bunlar ola bilər: \n"
+"\n"
+"\n"
+" - Ad: Bu sadəcə olaraq yaboot ĂŒĂ§ĂŒn açılacaq sistemi timsal edən bir "
+"addır.\n"
+"\n"
+"\n"
+" - Əks: Bu isə açılacaq çəkirdəyin, yə'ni kernelin adıdır. Çox vaxt bu "
+"vmlinux və ya\n"
+"bunun variasiyalarıdır.\n"
+"\n"
+"\n"
+" - Kök: Linuks qurulumunun kök avadanlığı və ya '/'.\n"
+"\n"
+"\n"
+" \n"
+" - Əlavə: Apple avadanlıqlarında kernel əlavə seçənəkləri ilə sıxlıqla "
+"baƟlanğıc\n"
+"video avadanlığı və ya sıx sıx xəta verən 2ci və 3cĂŒ siçan dĂŒymələri ĂŒĂ§ĂŒn "
+"emulyasiya\n"
+"imkanları tanına bilir. Məsələn bunlar \n"
+"bir neçə nĂŒmunədir:\n"
+"\n"
+"\n"
+"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
+"hda=autotune\n"
+"\n"
+"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
+"\n"
+"\n"
+" \n"
+" - Initrd: AçılÄ±ĆŸ avadanlığından əvvəl bə'zi açılÄ±ĆŸ modullarını seçmək\n"
+"ĂŒĂ§ĂŒn iƟlədilir, ya da təcili yardım açılÄ±ĆŸlarında ramdisk əksini yĂŒkləmək "
+"imkanı verir.\n"
+"\n"
+"\n"
+" - Initrd-size: Ana ramdisk böyĂŒklĂŒyĂŒ ĂŒmumiyyətlə 4096 baytdır. Əgər daha "
+"geniƟ ramdisk bildirə\n"
+"bilərsiniz isə bu seçənəyi iƟlədin.\n"
+"\n"
+"\n"
+" - Oxuma-yazma: Normalda sistemin 'dirilməsindən' əvvəl bə'zi sınaqların "
+"aparıla bilməsi ĂŒĂ§ĂŒn\n"
+"'root' fayl sistemi bu moda soxulur. Bu seçənəyi nəzərə almayabilərsiniz.\n"
+"\n"
+"\n"
+" - NoVideo: Bəlkə Apple video avadanlığı problem çıxarda bilər.Onda bu "
+"seçənəklə\n"
+"sistemi 'novideo' modda təbii framebuffer dəstəyi ilə aça bilərsiniz.\n"
+"\n"
+"\n"
+" - Əsas: Bu seçənəklə Linuks sistemi əsas əməliyyat sistemi halına gətirə "
+"bilərsiniz.\n"
+"Onda ENTER dĂŒyməsinə basmaqla Linuks sistemi açılacaqdır. Bu giriƟ ayrıca "
+"TAB ilə açılÄ±ĆŸ seçkilərinə baxdığınız vaxt \n"
+"'*' iƟarətilə iĆŸÄ±qlandırılacaqdır."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Slovenia"
-msgstr "Sloveniya"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Saint Helena"
-msgstr "MĂŒqəddəs Helena"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "No floppy drive available!"
+msgstr "Disket sĂŒrĂŒcĂŒ yoxdur"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Singapore"
-msgstr "Sinqapur"
+msgid ""
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sudan"
-msgstr "Sudan"
+msgid "Continue anyway?"
+msgstr "Davam edilsin?"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Seychelles"
-msgstr "SeyƟel"
+msgid ""
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Solomon Islands"
-msgstr "Solomon Adaları"
+msgid "Printer"
+msgstr "Çap Edici"
#: ../../lang.pm:1
#, c-format
msgid "Saudi Arabia"
msgstr "Səudiyyə Ərəbistan"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Rwanda"
-msgstr "Rvanda"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Russia"
-msgstr "Rusca"
+msgid "Internet"
+msgstr "Ä°nternet"
-#: ../../lang.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Romania"
-msgstr "Ruminıya"
+msgid "Some devices were added:\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Reunion"
-msgstr "Reyunion"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "Geometriyası: %s silindr, %s baƟ, %s sektor\n"
-#: ../../lang.pm:1
-#, c-format
-msgid "Qatar"
-msgstr "Katar"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing on the printer \"%s\""
+msgstr "ƞəbəkə dayandırılır"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Palau"
-msgstr "Palau"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore From Tape"
+msgstr "Bölmə cədvəlini qurtar"
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Paraguay"
-msgstr "Paraqvay"
+msgid "Choose the profile to configure"
+msgstr "Qurulacaq profili seçin"
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Portugal"
-msgstr "Portuqaliya"
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Palestine"
-msgstr "Paket seçkilərini saxla"
+msgid "Backup Now from configuration file"
+msgstr "ƞəbəkə quraƟdırılması"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
+msgid "Mount points should contain only alphanumerical characters"
+msgstr "Çap edici adı təkcə hərf, rəqəm və alt xətt daxil edə bilər"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Restarting printing system..."
+msgstr "Hansı çap edici sistemini istifadə etmək istəyirsiniz?"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "Puerto Rico"
-msgstr "Porto Riko"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Pitcairn"
-msgstr "Pitkairn"
+msgid "See hardware info"
+msgstr "Avadanlıq mə'lumatına bax"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "MĂŒqəddəs Pyer və Migelion"
+msgid "First sector of boot partition"
+msgstr "AçılÄ±ĆŸ qisminin ilk sektoru"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Poland"
-msgstr "PolƟa"
+msgid "Printer manufacturer, model"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Pakistan"
-msgstr "Pakistan"
+msgid "PDQ - Print, Don't Queue"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Philippines"
-msgstr "Filippin"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Papua New Guinea"
-msgstr "Papua Yeni Qvineya"
+msgid "Subnet Mask:"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "French Polynesia"
-msgstr "Fransız Poloneziyası"
+msgid "LiLo and Bootsplash themes installation successfull"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Peru"
-msgstr "Peru"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"Buradaki iki vacib parametr ĂŒfĂŒqi ve Ɵaquli yeniləmə sĂŒr'ətləridir.\n"
+"Seçərkən monitorunuzun qabiliyyətinin ĂŒstĂŒndə bir parametr\n"
+"seçməməyiniz çox vacibdir, əks halda monitor zərər görər.\n"
+"Seçərkən bir qərarsızlığa dĂŒĆŸÉ™rsəniz, alçaq rezolyusiya seçin."
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Panama"
-msgstr "Panama"
+msgid "Modify"
+msgstr "TəkmilləƟdir"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Oman"
-msgstr "Oman"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "New Zealand"
-msgstr "Yeni Zellandiya"
+msgid "Need hostname, username and password!"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Niue"
-msgstr "Niu"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Nauru"
-msgstr "Nauru"
+msgid "HardDrake"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Nepal"
-msgstr "Nepal"
+msgid "new"
+msgstr "yeni"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Would you like to try again?"
+msgstr "Bir çap edici qurmaq istəyirsiniz?"
+
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Nicaragua"
-msgstr "Nikaraqua"
+msgid "Wizard"
+msgstr "Sehirbaz"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Edit selected server"
+msgstr "%s tapıldı"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please choose where you want to backup"
+msgstr "XahiƟ edirik qurmaq istədiyiniz paketləri seçin."
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Nigeria"
-msgstr "Nigeriya"
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr ""
+"Bölmə cəvəlindəki dəyiƟikliklərin daxil olması ĂŒĂ§ĂŒn kompĂŒterinizi yenidən "
+"baƟlatmalısınız."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Norfolk Island"
-msgstr "Norfolk Adaları"
+msgid "Do not include the browser cache"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Niger"
-msgstr "Niger"
+msgid "Please, choose your keyboard layout."
+msgstr "Klaviatura quruluƟunu seçiniz."
-#: ../../lang.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
-msgid "New Caledonia"
-msgstr "Yeni Kaledoniya"
+msgid "Standard"
+msgstr "Standart"
-#: ../../lang.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Namibia"
-msgstr "Namibiya"
+msgid "Please choose your mouse type."
+msgstr "XahiƟ edirik siçanınızın növĂŒnĂŒ seçin."
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Mozambique"
-msgstr "Mozambiq"
+msgid "Connect..."
+msgstr "Bağlan..."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Failed to configure printer \"%s\"!"
+msgstr "Çap Edicini Qur"
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "not configured"
+msgstr "yenidən quraƟdır"
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Malaysia"
-msgstr "Malayziya"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "About"
+msgstr "Dayandır"
+
+#: ../../network/network.pm:1
#, c-format
-msgid "Mexico"
-msgstr "Meksika"
+msgid "Proxies configuration"
+msgstr "Vəkil vericilər quraƟdırılması"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Malawi"
-msgstr "Malavi"
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Maldives"
-msgstr "Maldiv"
+msgid "Start: sector %s\n"
+msgstr "BaƟlanğıc: sektor %s\n"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Network interface already configured"
+msgstr "Monitor qurulmayıb"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Mauritius"
-msgstr "Maurit"
+msgid "Couldn't access the floppy!"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Malta"
-msgstr "Malta"
+msgid "connecting to Bugzilla wizard ..."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "Mail Server"
+msgstr "Databeyz"
+
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Montserrat"
-msgstr "Montserrat"
+msgid "Please click on a partition"
+msgstr "XahiƟ edirik bir bölmə ĂŒstĂŒnə tıqlayın"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Mauritania"
-msgstr "Mavritaniya"
+msgid "Linux"
+msgstr "Linuks"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Martinique"
-msgstr "Martiniq"
+msgid "Have a nice day!"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Northern Mariana Islands"
-msgstr "ƞimali Marian Adaları"
+msgid "across Network"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Mongolia"
-msgstr "Monqolustan"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Upgrade %s"
+msgstr "GĂŒncəlləmə"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Myanmar"
-msgstr "Myanmar"
+msgid "Select Printer Connection"
+msgstr "Çap Edici Bağlantısı Seçin"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Mali"
-msgstr "Mali"
+msgid "Scanning for TV channels in progress ..."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Macedonia"
-msgstr "Makedoniya"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Marshall Islands"
-msgstr "MarƟal Adaları"
+msgid "IP Range Start:"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Madagascar"
-msgstr "Madaqaskar"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"Internet superserver daemon (qısaca inetd ) bir çox \n"
+"baƟqa internet xidmətcisini lazım gəldiyi zaman iƟa salır. İçində telnet, "
+"ftp, rsh və rlogin kimi proqramın olduğu xidmətləri iƟə salmaqla məs'uldur.\n"
+"inetd-ni sistemden çıxarmaq, onun məs'ul olduğu bĂŒtĂŒn xidmətləri\n"
+"rədd etmək mənasını daĆŸÄ±yır."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Moldova"
-msgstr "Moldova"
+msgid "the height of the progress bar"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Monaco"
-msgstr "Monako"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Morocco"
-msgstr "MərakeƟ"
+msgid "Argentina"
+msgstr "Argentina"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
+#, c-format
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
+msgstr ""
+
+#: ../../network/drakfirewall.pm:1
#, fuzzy, c-format
-msgid "Libya"
-msgstr "Liberiya"
+msgid "Domain Name Server"
+msgstr "Sahə(domain) adı"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Security Level:"
+msgstr "TəhlĂŒkəsizlik səviyyəsinin quraƟdırılması"
+
+#: ../../fsedit.pm:1
#, c-format
-msgid "Latvia"
-msgstr "Latviya"
+msgid "Mount points must begin with a leading /"
+msgstr "Bağlama nöqtələri / ilə baƟlamalıdır"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Postfix Mail Server"
+msgstr "Postfix məktub vericisi, Inn xəbər vericisi"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Luxembourg"
-msgstr "LĂŒksemburq"
+msgid "Quit without saving"
+msgstr "Qeyd etmədən Çıx"
#: ../../lang.pm:1
#, c-format
-msgid "Lithuania"
-msgstr "Litvaniya"
+msgid "Yemen"
+msgstr "Yəmən"
-#: ../../lang.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Lesotho"
-msgstr "Lesoto"
+msgid "This product is available on the MandrakeStore Web site."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Liberia"
-msgstr "Liberiya"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Sri Lanka"
-msgstr "ƞri Lanka"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Liechtenstein"
-msgstr "LixtenƟteyn"
+msgid "Hard drive detection"
+msgstr "Sabit disk seçkisi"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Saint Lucia"
-msgstr "MĂŒqəddəs Lusiya"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
+
+#: ../../diskdrake/dav.pm:1
+#, fuzzy, c-format
+msgid "Please enter the WebDAV server URL"
+msgstr "XahiƟ edirik siçanınızı seçin"
#: ../../lang.pm:1
#, c-format
-msgid "Lebanon"
-msgstr "Livan"
+msgid "Tajikistan"
+msgstr "Tacikistan"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Laos"
-msgstr ""
+msgid "Accept"
+msgstr "Qəbul Et"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Kazakhstan"
-msgstr "Qazaxstan"
+msgid "Description"
+msgstr "Ä°zah"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Cayman Islands"
-msgstr "Kayman Adaları"
+msgid "Error opening %s for writing: %s"
+msgstr "Yazmaq ĂŒĂ§ĂŒn açılan %s'də xəta: %s"
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Kuwait"
-msgstr "KĂŒveyt"
+msgid "Mouse type: %s\n"
+msgstr "Siçan növĂŒ: %s\n"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr "Sizin kartınızın XFree %s ilə 3D dəstəyi ola bilər."
+
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Korea"
-msgstr "Daha Çox"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "Klaviatura quruluƟunu seçiniz."
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Korea (North)"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "MĂŒqəddəs Kit və Nevis"
+msgid "Expert Area"
+msgstr "Ustaların Sahəsi"
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Comoros"
-msgstr "Komor"
+msgid "Choose a monitor"
+msgstr "Monitorunuzu seçin"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Kiribati"
-msgstr "Kiribati"
+msgid "Empty label not allowed"
+msgstr "BoƟ etiket qəbul edilə bilməz"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Cambodia"
-msgstr "Kambodiya"
+msgid "Maltese (UK)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Kyrgyzstan"
-msgstr "Qırğızıstan"
+msgid "I can't add any more partition"
+msgstr "Artıq bölmə əlavə edilə bilməz"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Kenya"
-msgstr "Kenya"
+msgid "Size in MB: "
+msgstr "MB cinsindən böyĂŒklĂŒk: "
-#: ../../lang.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Japan"
-msgstr "Yaponiya"
+msgid "Remote printer"
+msgstr "Uzaq Çap Edici"
-#: ../../lang.pm:1
-#, c-format
-msgid "Jordan"
-msgstr "Ä°ordaniya"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Please choose a language to use."
+msgstr "XahiƟ edirik istifadə ĂŒĂ§ĂŒn bir dil seçin."
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Jamaica"
-msgstr "Yamayka"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
+"DÄ°QQƏT: Bu avadanlıq daha əvvəl Ä°ntenetə bağlanmaq ĂŒĂ§ĂŒn qurulmuƟdur.\n"
+"Avadanlığın qurğularını dəyiƟdirmaək istəmirsiniz isə,\n"
+"OLDU ya basın.\n"
+"AƟağıdakı giriƟləri dĂŒzəltməniz özĂŒnĂŒ əvvəlki qurğuların ĂŒstĂŒnə yazacaqdır."
-#: ../../lang.pm:1
-#, c-format
-msgid "Iceland"
-msgstr "Ä°slandiya"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "I can set up your computer to automatically log on one user."
+msgstr ""
+"KompĂŒterinizi avtomatik olaraq bir istifadəçi ilə baƟlada bilərəm.\n"
+"İstəmirsiniz isə rədd edin."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Iran"
-msgstr "Ä°raq"
+msgid "Floppy format"
+msgstr "ƞəkilləndir"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Iraq"
-msgstr "Ä°raq"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "Britaniya Hind Okeanı Sahəsi"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Generic Printers"
+msgstr "Çap Edici"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "India"
-msgstr "Hindistan"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Israel"
-msgstr "Ä°srail"
+msgid "The scanners on this machine are available to other computers"
+msgstr ""
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Ireland"
-msgstr "Ä°zlandiya dili"
+msgid "First sector of the root partition"
+msgstr "AçılÄ±ĆŸ qisminin ilk sektoru"
-#: ../../lang.pm:1
-#, c-format
-msgid "Indonesia"
-msgstr "Ä°ndoneziya"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Alternative drivers"
+msgstr "Sınaq səhifəsi çap edilir..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hungary"
-msgstr "Macarıstan"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Haiti"
-msgstr "Haiti"
+msgid "Initrd"
+msgstr "Initrd"
#: ../../lang.pm:1
#, c-format
-msgid "Croatia"
-msgstr "Xırvatıstan"
+msgid "Cape Verde"
+msgstr "Keyp Verde"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Honduras"
-msgstr "Honduras"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Hird Adası və Mkdonald Adaları"
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Hong Kong"
-msgstr "Honq Konq"
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "China"
-msgstr "Çin"
+msgid "Guam"
+msgstr "Quam"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Guyana"
-msgstr "Quyana"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Guinea-Bissau"
-msgstr "Qvineya Bissau"
+msgid "/Options/Test"
+msgstr "/Seçənəklər/Sınaq"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Guam"
-msgstr "Quam"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+"Bu səviyyə RAID'i diqqətli istifadənizi tövsiyə edirik. Sisteminiz daha "
+"asand\n"
+"iƟlədiləcək, ancaq xətalara qarĆŸÄ± da həssaiyyəti də artacaqdır. Ä°nternetə \n"
+"bağlı isəniz bunu tövsiyə etmirik. Parol ilə girilir."
-#: ../../lang.pm:1
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid "Mounting partition %s"
+msgstr "ƞəkilləndirilən bölmə: %s"
+
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Guatemala"
-msgstr "Quatemala"
+msgid "User name"
+msgstr "Ä°stifadəçi adı"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, fuzzy, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "Cinubi Georgiya və Cənubi Sandviç Adası"
+msgid "New configuration (isdn-light)"
+msgstr "Oddan divar (Firewall) quruluƟu tapıldı!"
-#: ../../lang.pm:1
-#, c-format
-msgid "Equatorial Guinea"
-msgstr "Ekvatorial Qvineya"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Userdrake"
+msgstr "Çap Edici"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Guadeloupe"
-msgstr "Quadelup"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "Linuks4Win'i qurmaq ĂŒĂ§ĂŒn hansı disk bölməsini istifadə edəcəksiniz?"
-#: ../../lang.pm:1
-#, c-format
-msgid "Guinea"
-msgstr "Qvineya"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup system"
+msgstr "Fayl sistemi qurğuları"
-#: ../../lang.pm:1
-#, c-format
-msgid "Gambia"
-msgstr "Qambiya"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Test pages"
+msgstr "Qapıları sına"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Greenland"
-msgstr "Qrinland"
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Gibraltar"
-msgstr "Gibraltar"
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid "Checking %s"
+msgstr "Rezolyusiya: %s\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "TCP/Socket Printer Options"
+msgstr "Soket Çap Edici Qurğuları"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Ghana"
-msgstr "Qana"
+msgid "Card mem (DMA)"
+msgstr "Kart mem (DMA)"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "France"
+msgstr "Fransızca"
+
+#: ../../standalone/drakperm:1
#, c-format
-msgid "French Guiana"
-msgstr "Fransız Gvineyası"
+msgid "browse"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Georgia"
-msgstr "GĂŒrcĂŒstan"
+msgid "Checking installed software..."
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remote printer name missing!"
+msgstr "Uzaqdakı ev sahibi adı"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "Çap edicini sınamaq istəyirsiniz?"
#: ../../lang.pm:1
#, c-format
-msgid "Grenada"
-msgstr "Qrenada"
+msgid "Turkey"
+msgstr "TĂŒrkiyə"
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "United Kingdom"
-msgstr "BirləƟmiƟ Krallıq"
+msgid "Alcatel speedtouch usb"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Number of buttons"
+msgstr "2 dĂŒyməli"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "Gabon"
-msgstr "Qabon"
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Vyetnam dili \"numeric row\" QWERTY"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Module"
+msgstr "Siçan"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Faroe Islands"
-msgstr "Faro Adaları"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Micronesia"
-msgstr "Mikroneziya"
+msgid "Hardware"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Fokland Adaları (Malvin)"
+msgid "Ctrl and Alt keys simultaneously"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Fiji"
-msgstr "Fici"
+msgid "United States"
+msgstr "BirləƟmiƟ ƞtatlar"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Finland"
-msgstr "Finlandiya"
+msgid "Default OS?"
+msgstr "Əsas OS"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Ethiopia"
-msgstr "Efiopiya"
+msgid "Swiss (German layout)"
+msgstr "Ä°sveçcə (Alman sırası)"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Spain"
-msgstr "Ä°spaniya"
+msgid "Configure all heads independently"
+msgstr "BĂŒtĂŒn baƟlıqları ayrı ayrı quraƟdır"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Eritrea"
-msgstr "Eritre"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "NTP Server"
+msgstr "NIS Verici"
+
+#: ../../install_steps_gtk.pm:1
+#, fuzzy, c-format
+msgid "Load/Save on floppy"
+msgstr "Disketə qeyd et"
+
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Western Sahara"
-msgstr "Qərbi Saxara"
+msgid "This theme does not yet have a bootsplash in %s !"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Egypt"
-msgstr "Misir"
+msgid "nice"
+msgstr "gözəl"
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
+#, fuzzy, c-format
+msgid "Leaving in %d seconds"
+msgstr "%d saniyə sonra çıxılacaq"
+
+#: ../../network/modem.pm:1
#, c-format
-msgid "Estonia"
-msgstr "Estoniya"
+msgid "Please choose which serial port your modem is connected to."
+msgstr "Modeminizin hansı serial qapıya bağlı olduğunu seçiniz"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Country"
+msgstr "Ölkə:"
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Property"
+msgstr "Qapı"
+
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Ecuador"
-msgstr "Ekvador"
+msgid "Ghostscript"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Algeria"
-msgstr "Əlcəzair"
+msgid "LAN Configuration"
+msgstr "Yerli ƞəbəkə QuraƟdırılması"
#: ../../lang.pm:1
#, c-format
-msgid "Dominican Republic"
-msgstr "Dominikan Respublikası"
+msgid "Ghana"
+msgstr "Qana"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Dominica"
-msgstr "Dominik"
+msgid "Path or Module required"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Advanced Options"
+msgstr "Yerli ƞəbəkə QuraƟdırılması"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Denmark"
-msgstr "Danimarka"
+msgid "Coma bug"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
+"Bu nöqtədə siz Linuks Mandrake yĂŒkləmək ĂŒĂ§ĂŒn bölmələri seçməlisiniz. Əgər "
+"əvvəldən bölmələr var isə (sistemdə əvvəllər qurulu olan GNU/Linuks "
+"bölmələri və ya baƟqa bölmələndirmə vasitələri ilə hazırladığınız bölmələr), "
+"onları seçin və istifadə edin.\n"
+"Yoxsa onları bildirməlisiniz.\n"
+"\n"
+"\n"
+"Bölmələri yaratmaq ĂŒĂ§ĂŒn əvvəlci diski seçməlisiniz.\n"
+"Diski seçmək ĂŒĂ§ĂŒn birinci IDE sĂŒrĂŒcĂŒsĂŒ ĂŒĂ§ĂŒn \"hda\" nı, ikinciyi seçmək ĂŒĂ§ĂŒn "
+"\"hdb\"ni, birinci SCSÄ° sĂŒrĂŒcĂŒsĂŒ ĂŒĂ§ĂŒn ise \"sda\" vs tıqlamalısınız.\n"
+"\n"
+"\n"
+"Seçdiyiniz sĂŒrĂŒcĂŒyə aƟağıdakıları etməyə qadirsiniz:\n"
+"\n"
+" *Hamısını təmizlə: seçili sĂŒrĂŒcĂŒdə bĂŒtĂŒn bölmələri silər.\n"
+"\n"
+"\n"
+" *Avtomatik: SĂŒrĂŒcĂŒnĂŒzdəki boƟ sahədə Ext2 və Swapbölmələrini avtomatik\n"
+"yaradar.\n"
+"\n"
+"\n"
+" *Bölmə cədvəlini qurtar: ZədələnmiƟ bölmə cədvəlinibərpa edər. XahiƟ "
+"edirik\n"
+" diqqətli olun, Ă§ĂŒnkĂŒ bu da iflas edə bilər.\n"
+"\n"
+"\n"
+" *Gəri dön: Ä°stəmədiyiniz seçkilərinizdən geri döndərər.\n"
+"\n"
+"\n"
+" *Yenidən yĂŒklə: BĂŒtĂŒn dəyiƟikliklərinizdən geri dönərbaƟdakı bölmə "
+"cədvəlinə gələr.\n"
+"\n"
+"\n"
+" *Sehirbaz: Bölmələndirməyi bir sehirbaz edər. TəcrĂŒbəsizisəniz bunu "
+"seçin.\n"
+"\n"
+"\n"
+" *Floppy-dən bərpa et: Bölmə cədvəlini əvvəllər flopy-yə qeydetdiniz isə, "
+"bölmə cədvəlini bərpa edin.\n"
+"\n"
+"\n"
+" *Floppy-yə qeyd et: Daha sonradan bərpa etmek ĂŒĂ§ĂŒnbilgiləri floppy-yə qeyd "
+"edin.\n"
+" Bu seçki Ɵiddətlə tövsiyə edilir.\n"
+"\n"
+"\n"
+" *Oldu: Bölmələndirmə bitdiyində, bunu seçərəkdəyiƟikliklərinizi qeyd "
+"edin.\n"
+"\n"
+"\n"
+"Xəbəriniz olsun, istənilən seçkiyə Tab ve AƟağı/Yuxarı oxlarını da iƟlədərək "
+"klaviaturadan idarə edə bilərsiniz.\n"
+"\n"
+"\n"
+"Bölmə seçildiyi zaman bunları iƟlədə bilərsiniz:\n"
+"\n"
+" *Ctrl-c yeni bölmə yaratmaq ĂŒĂ§ĂŒn (boƟ bölmə seçili olduğu zaman)\n"
+"\n"
+" *Ctrl-d bölməni ləğv etmək ĂŒĂ§ĂŒn\n"
+"\n"
+" *Ctrl-m bağlama nöqtəsini göstərmək ĂŒĂ§ĂŒn\n"
+"\n"
+"\n"
+"\n"
+"Əgər PPC kompĂŒterdə qurulum aparırsınızsa, ən az 1 MBlıq balaca bir HFC "
+"'bootstrap' bölməsini yaboot açılÄ±ĆŸ yĂŒkləyicisi ĂŒĂ§ĂŒn seçmək istəyəcəksiniz.\n"
+"Əgər daha çox yeriniz varsa ; məsələn 50 MB, onda bĂŒtĂŒn kernel və ramdisk "
+"əksini təcili açılÄ±ĆŸ halları ĂŒĂ§ĂŒn saxlaya bilərsiniz."
+
+#: ../../help.pm:1
#, c-format
-msgid "Djibouti"
-msgstr "Cibuti"
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Cyprus"
-msgstr "Kipr (Yunan və TĂŒrk) "
+msgid "There was an error installing packages:"
+msgstr "Paketlər qurulurkən bir xəta oldu:"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Lexmark inkjet configuration"
+msgstr "İnternet qurğuları"
+
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Christmas Island"
-msgstr "Kristmas Adası"
+msgid "Undo"
+msgstr "Geri al"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Save partition table"
+msgstr "Bölmə cədvəlini yaz"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "Cape Verde"
-msgstr "Keyp Verde"
+msgid "Finnish"
+msgstr "Fincə"
#: ../../lang.pm:1
#, c-format
-msgid "Cuba"
-msgstr "Kuba"
+msgid "Macedonia"
+msgstr "Makedoniya"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Colombia"
-msgstr "Kolumbiya"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Cameroon"
-msgstr "Kamerun"
+msgid "Slovenian"
+msgstr "Slovencə"
#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Libya"
+msgstr "Liberiya"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Chile"
-msgstr "Çili"
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr "Skriptlə qurulur, proqram tə'minatı qurulur, xidmətlər baƟladılır..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Cook Islands"
-msgstr "Kuku Adaları"
+msgid ""
+"\n"
+"- Burn to CD"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Cote d'Ivoire"
-msgstr "Kot Divuar"
+msgid "Table"
+msgstr "Cədvəl"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Switzerland"
-msgstr "İsveçrə"
+msgid "I don't know how to format %s in type %s"
+msgstr "%s'i necə Ɵəkilləndirəcəyimi bilmirəm (Növ: %s)"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model"
+msgstr "Siçan"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "Congo (Brazzaville)"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Central African Republic"
-msgstr "Mərkəzi Afrika Respublikası"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Stop Server"
+msgstr "NIS Verici"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Congo (Kinshasa)"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Kokos Adası"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Modem"
+msgstr "Siçan"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Canada"
-msgstr "Kanada"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Belize"
-msgstr "Beliz"
+msgid "Tuvalu"
+msgstr "Tuvalu"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "Belarus"
-msgstr "Belarusiya"
+msgid "Use auto detection"
+msgstr "Avtomatik təsbit iƟlət"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Botswana"
-msgstr "Botsvana"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr ""
+"GPM, Midnight Commander kimi mətn əsaslı tə'minatlara siçan dəstəyi əlavə "
+"edər.\n"
+"Ayrıca konsolda siçanla kəsmə və yapÄ±ĆŸdırma əməliyyatlarına da imkan verər.\n"
+"Konsolda pop-up menyu dəstəyi verər."
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Bouvet Island"
-msgstr "Buvet Adası"
+msgid "Started on boot"
+msgstr "AçılÄ±ĆŸda baƟladılır"
-#: ../../lang.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Bhutan"
-msgstr "Butan"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Bahamas"
-msgstr "Bahama"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Brazil"
-msgstr "Braziliya"
+msgid "Automatically find available printers on remote machines"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bolivia"
-msgstr "Boliviya"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Brunei Darussalam"
-msgstr "Bruney DarĂŒssəlim"
+msgid "East Timor"
+msgstr "ƞərqi Timor"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Bermuda"
-msgstr "Bermuda"
+msgid "Del profile..."
+msgstr "Profili sil..."
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Benin"
-msgstr "Benin"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Burundi"
-msgstr "Burundi"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing Foomatic..."
+msgstr "%s paketi qurulur"
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Bahrain"
-msgstr "Bahreyn"
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "LĂŒtfen çıxın və Ctrl-Alt-BackSpace dĂŒymələrinə basın"
-#: ../../lang.pm:1
-#, c-format
-msgid "Bulgaria"
-msgstr "Bolqarıstan"
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "detected"
+msgstr "%s tapıldı"
-#: ../../lang.pm:1
-#, c-format
-msgid "Burkina Faso"
-msgstr "Burkina Faso"
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr ""
+"Bu paket yenilənməlidir\n"
+"Sistemdən çıxarmaq mövzusunda ciddisiniz?"
-#: ../../lang.pm:1
-#, c-format
-msgid "Bangladesh"
-msgstr "BanqladeƟ"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Package: "
+msgstr "Paket Qrup Seçkisi"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Barbados"
-msgstr "Barbados"
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Bosniya və Herzoqovina"
+msgid "SECURITY WARNING!"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "StarOffice"
+msgstr "İƟ Yeri"
+
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Azerbaijan"
-msgstr "Azərbaycan"
+msgid "No, I don't want autologin"
+msgstr "Xeyr, Avtomatik giriƟ istəmirəm"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Aruba"
-msgstr "Aruba"
+msgid "Windows Migration tool"
+msgstr ""
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../any.pm:1 ../../help.pm:1
#, fuzzy, c-format
-msgid "Australia"
-msgstr "serial"
+msgid "All languages"
+msgstr "İƟlətdiyiniz dili seçin"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Removing %s"
+msgstr "Rezolyusiya: %s\n"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "American Samoa"
-msgstr "Amerikan Samoa"
+msgid "Testing your connection..."
+msgstr "Bağlantınız sınanır..."
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cache size"
+msgstr "parça böyĂŒklĂŒyĂŒ"
+
+#: ../../security/level.pm:1
#, c-format
-msgid "Argentina"
-msgstr "Argentina"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
+msgstr ""
+"Parollar fəallaƟdırıldı, yenə də bir Ɵəbəkə ĂŒstĂŒndə istifadə edilməməsi "
+"tövsiyə edilir."
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Antarctica"
-msgstr "Antarktika"
+msgid "Start sector: "
+msgstr "BaƟlanÄŸÄ±Ă§ sektoru: "
#: ../../lang.pm:1
#, c-format
-msgid "Angola"
-msgstr "Anqola"
+msgid "Congo (Brazzaville)"
+msgstr ""
+
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#, fuzzy, c-format
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr ""
+"Bu paket yenilənməlidir\n"
+"Sistemdən çıxarmaq mövzusunda ciddisiniz?"
#: ../../lang.pm:1
#, c-format
-msgid "Netherlands Antilles"
-msgstr "Holland Antilləri"
+msgid "Seychelles"
+msgstr "SeyƟel"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Armenia"
-msgstr "Ermənistan"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Bad password on %s"
+msgstr "Parolsuz"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Albania"
-msgstr "Albaniya"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Anguilla"
-msgstr "Anquilla"
+msgid "Zambia"
+msgstr "Zambiya"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Antiq və Barbuda"
+msgid "Security Administrator (login or email)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "United Arab Emirates"
-msgstr "BirləƟmiƟ Ərəb Əmirlikləri"
+msgid "Sorry, we support only 2.4 kernels."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Romanian (qwerty)"
+msgstr "Rusca (Yawerty)"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Andorra"
-msgstr "Andorra"
+msgid "Under Devel ... please wait."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Afghanistan"
-msgstr "Əfqanıstan"
+msgid "Czech Republic"
+msgstr "Çex Respublikası"
#: ../../lang.pm:1
#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
+msgid "Egypt"
+msgstr "Misir"
-#: ../../loopback.pm:1
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Dairəvi bağlama %s\n"
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "Old configuration (isdn4net)"
+msgstr "Oddan divar (Firewall) quruluƟu tapıldı!"
-#: ../../lvm.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Məntiqi ciltləri birinci olaraq sil\n"
+msgid "Sound card"
+msgstr "Səs kartı"
-#: ../../modules.pm:1
-#, c-format
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Import Fonts"
+msgstr "Bölmə Ɵəkilləndirilməsi"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
msgstr ""
+"Tək bir böyĂŒk disk bölməniz var\n"
+"(əsasən MS DOS/Windows istifadə edər).\n"
+"Əvvəlcə bu disk bölməsinin böyĂŒklĂŒyĂŒnĂŒ dəyiƟdirməyinizi\n"
+"tövsiyə edirik. Əvvəlcə bölmənin ĂŒstĂŒnə, sonra \"BöyĂŒklĂŒyĂŒ\n"
+"DəyiƟdir\" dĂŒyməsinə tıqlayın"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "TƏKƏRİ OYNADIN!"
+msgid "Suppress Temporary Files"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "To activate the mouse,"
-msgstr "Siçanınızı iƟə salmaq ĂŒĂ§ĂŒn,"
+msgid "Change partition type"
+msgstr "Bölmə növĂŒnĂŒ DəyiƟdir"
-#: ../../mouse.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Please test the mouse"
-msgstr "XahiƟ edirik siçanınızı seçin"
+msgid ""
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
-#: ../../mouse.pm:1
-#, c-format
-msgid "No mouse"
-msgstr "Siçansızs"
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Network Options"
+msgstr "Modul seçənəkləri:"
-#: ../../mouse.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "none"
-msgstr "heç biri"
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "3 buttons"
-msgstr "3 dĂŒyməli"
+msgid "Statistics"
+msgstr ""
-#: ../../mouse.pm:1
-#, c-format
-msgid "2 buttons"
-msgstr "2 dĂŒyməli"
+#: ../../printer/cups.pm:1
+#, fuzzy, c-format
+msgid "(on %s)"
+msgstr "(modul %s)"
#: ../../mouse.pm:1
#, c-format
-msgid "1 button"
-msgstr "1 dĂŒymə"
+msgid "MM Series"
+msgstr "MM Series"
-#: ../../mouse.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "busmouse"
-msgstr "busmouse"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid "average"
+msgstr ""
-#: ../../mouse.pm:1
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech mouse (serial ya da köhnə C7 növĂŒ)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "New printer name"
+msgstr "Çap Edicisiz"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid "Equatorial Guinea"
+msgstr "Ekvatorial Qvineya"
-#: ../../mouse.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "MM Series"
-msgstr "MM Series"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Build Backup"
+msgstr "Xətalı yedəkləmə faylı"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "Currently, no alternative possibility is available"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Romanian (qwertz)"
+msgstr "Rusca (Yawerty)"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Write Config"
+msgstr "yenidən quraƟdır"
+
+#: ../../services.pm:1
#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+"routed vasitəsi avtomatik IP router cədvəlinin RIP protokolu tərəfindən\n"
+"yenilənməsinə imkan verər. RIP əsasən kiçik Ɵəbəkələrdə istifadə edilir, "
+"daha böyĂŒk\n"
+"Ɵəbəkələrdə daha qarÄ±ĆŸÄ±q routing protokollarına ehtiyacı vardır."
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+msgid "Kiribati"
+msgstr "Kiribati"
-#: ../../mouse.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "Browse"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Sıravi 3 DĂŒyməli Siçan"
+msgid "CDROM"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Sıravi 2 DĂŒyməli Siçan"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "Ä°nternete giriƟi indi sınamaq istəyirsiniz?"
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "serial"
-msgstr "serial"
+msgid "Belgian"
+msgstr "Belçika dili"
-#: ../../mouse.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft IntelliMouse"
+msgid "Do you have an ISA sound card?"
+msgstr "BaƟqa var?"
-#: ../../mouse.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Wheel"
-msgstr "Çərx"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
+msgstr ""
+"Sisteminizdə heç bir eternet Ɵəbəkə adapteri tapıla bilmədi.\n"
+"Bu bağlantı Ɵəklini qura bilmərəm."
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
-#, c-format
-msgid "Generic"
-msgstr "Ümumi"
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid "Windows"
+msgstr "NIS sahəsi"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+#: ../../common.pm:1
+#, fuzzy, c-format
+msgid "Can't make screenshots before partitioning"
+msgstr "Artıq bölmə əlavə edilə bilməz"
-#: ../../mouse.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Host Name"
+msgstr "Ev sahibi adı"
+
+#: ../../standalone/logdrake:1
#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+msgid "/File/Save _As"
+msgstr "/Fayl/_Fərqli Qeyd Et"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Sıravi PS2 Çərxli Siçan"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr ""
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Standard"
-msgstr "Standart"
+msgid "Delay before booting default image"
+msgstr "AçılÄ±ĆŸda gecikmə mĂŒddəti"
-#: ../../mouse.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - Siçan"
+msgid "Restrict command line options"
+msgstr "Əmr sətiri seçənəklərini məhdudlaƟdır"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "East Europe"
+msgstr "Avropa"
+
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Otaq və grup sıralaması arasında gəz"
+msgid "Use free space"
+msgstr "BoƟ sahəni istifadə et"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Collapse Tree"
-msgstr "Ağacı Qapat"
+msgid "use dhcp"
+msgstr "dhcp istifadə et"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Expand Tree"
-msgstr "Ağacı Aç"
+msgid "Mail alert"
+msgstr ""
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Info"
-msgstr "Mə'lumat"
+msgid "Internet configuration"
+msgstr "İnternet qurğuları"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Is this correct?"
-msgstr "Doğrudur?"
+msgid "Uzbekistan"
+msgstr "Özbəkistan"
-#: ../../my_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Detected %s"
+msgstr "%s tapıldı"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _printers"
+msgstr "Avtomatik təsbit iƟlət"
+
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr ""
+msgid "Finish"
+msgstr "Qurtar"
-#: ../../partition_table.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Error writing to file %s"
-msgstr "%s faylına yazarkən xəta oldu"
+msgid "Show automatically selected packages"
+msgstr "Avtomatik seçili paketləri göstər"
-#: ../../partition_table.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Bad backup file"
-msgstr "Xətalı yedəkləmə faylı"
+msgid "CPU flags reported by the kernel"
+msgstr ""
-#: ../../partition_table.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "%s faylından qurtarılÄ±ĆŸda xəta: %s"
+msgid "Togo"
+msgstr "Toqo"
-#: ../../partition_table.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+msgid "Something went wrong! - Is mkisofs installed?"
msgstr ""
-"Bölmə cədvəlinizdə bir boƟluq var, amma o da iƟlədilə bilməz.\n"
-"Bu boƟluğu, birinci bölmənizi en yaxınındakı geniƟlədilmiƟ bölməyə "
-"daĆŸÄ±yaraq\n"
-"məsələni həll edə bilərsiniz."
-#: ../../partition_table.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Bu platformda geniƟlədilmiƟ bölmələr dəstəklənmir"
+msgid "16 MB"
+msgstr "16 MB"
-#: ../../partition_table.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "mount failed: "
-msgstr "bağlama iflas etdi: "
+msgid "Please try again"
+msgstr "XahiƟ edirik təkrar sınayın"
-#: ../../pkgs.pm:1
-#, c-format
-msgid "maybe"
-msgstr "bəlkə"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The model is correct"
+msgstr "Doğrudur?"
-#: ../../pkgs.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "nice"
-msgstr "gözəl"
+msgid "FAT resizing failed: %s"
+msgstr "FAT böyĂŒklĂŒyĂŒ dəyiƟdirilməsi bacarılmadı: %s"
-#: ../../pkgs.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "very nice"
-msgstr "əla"
+msgid "Individual package selection"
+msgstr "Fərdi paket seçkisi"
-#: ../../pkgs.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "important"
-msgstr "vacib"
+msgid "This partition is not resizeable"
+msgstr "Hansı bölmə növĂŒnĂŒ istəyirsiniz?"
-#: ../../pkgs.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "must have"
-msgstr "alınmalı"
+msgid "Location"
+msgstr "Yeri"
-#: ../../raid.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "%d səviyyə RAID ĂŒĂ§ĂŒn çatmayan sayda disk bölməsi\n"
+msgid "USA (cable-hrc)"
+msgstr ""
-#: ../../raid.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid "Journalised FS"
+msgstr "bağlama iflas etdi"
+
+#: ../../lang.pm:1
#, c-format
-msgid "mkraid failed"
-msgstr "mkraid iflas etdi"
+msgid "Guatemala"
+msgstr "Quatemala"
-#: ../../raid.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "This machine"
+msgstr "oxƟayır"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid iflas etdi (raidtools əksik ola bilər mi?)"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "DOS sĂŒrĂŒcĂŒ hərfi: %s (sadəcə təxmini)\n"
-#: ../../raid.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "ƞəkilləndirilmiƟ RAID md%d-yə disk bölməsi əlavə edilə bilinmədi"
+msgid "Select the files or directories and click on 'OK'"
+msgstr ""
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid "Stop"
-msgstr "Sektor"
+#: ../../lang.pm:1
+#, c-format
+msgid "Bahrain"
+msgstr "Bahreyn"
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid "Start"
-msgstr "Hal:"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "omit scsi modules"
+msgstr "scsi modulları keç"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "On boot"
-msgstr "AçılÄ±ĆŸda"
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr ""
-#: ../../services.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"No additional information\n"
-"about this service, sorry."
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
msgstr ""
-"Bu xidmət haqqında təəsĂŒf ki,\n"
-"əlavə mə'lumat yoxdur."
+"ƞəbəkədən quraƟdırması apardığınız ĂŒĂ§ĂŒn Ɵəbəkəniz artıq qurulmuƟ olmalıdır.\n"
+"ƞəbəkə/Ä°nternet bağlantınızı yenidən quraƟdırmaq ĂŒĂ§ĂŒn Oldu'ya yoxsa Ləğv "
+"et'ə basın.\n"
-#: ../../services.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Services and deamons"
-msgstr "Xidmətlər və vasitələr"
+msgid "Keyboard layout: %s\n"
+msgstr "Klavatura dĂŒzĂŒlĂŒĆŸĂŒ: %s\n"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "stopped"
-msgstr "dayandırılıb"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "running"
-msgstr "iƟləmir"
+msgid "Maltese (US)"
+msgstr ""
#: ../../services.pm:1
#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "AçılÄ±ĆŸda avtomatik olaraq baƟlayacaq xidmətləri seçin"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"BĂŒtĂŒn ƞəbəkə Fayl Sistemlərini (NFS), SMB (Lan Manager/Windows), və \n"
+"NCP (NetWare) bağlama nöqtələrini bağlar və ayırır."
-#: ../../services.pm:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "Database Server"
-msgstr "Databeyz"
+msgid "Tvcard"
+msgstr "TV kartı"
-#: ../../services.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Remote Administration"
-msgstr "Uzaq Çap Edici (lpd) Seçənəkləri"
+msgid "Toggle between normal/expert mode"
+msgstr "Normal moda keç"
-#: ../../services.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "File sharing"
-msgstr ""
+msgid "Size"
+msgstr "BöyĂŒklĂŒk"
-#: ../../services.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Internet"
-msgstr "Ä°nternet"
+msgid "GRUB"
+msgstr ""
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid "Printing"
-msgstr "Çap Edici"
+#: ../../lang.pm:1
+#, c-format
+msgid "Greenland"
+msgstr "Qrinland"
-#: ../../services.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"X Font Vericisini açılÄ±ĆŸda iƟə salar (Bu, XFree icrası ĂŒĂ§ĂŒn məcburidir)."
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "USB avadanlığınız ĂŒĂ§ĂŒn sĂŒrĂŒcĂŒləri yĂŒkləyin."
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr ""
-#: ../../services.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"Syslog, bir çox vasitənin ismarıclarını mĂŒxtəlif sistem qeydlərində\n"
-"tutmalarına imkan verər. Syslog'un hər zaman iƟləməsi\n"
-"yaxĆŸÄ± fikirdir."
+"Ä°nternet Bağlantısı BölĂŒĆŸdĂŒrĂŒlməsi qurulması artıq bitdi.\n"
+"Və artıq fəallaƟdırılmÄ±ĆŸdır.\n"
+"\n"
+"Nə etmək istəyirsiniz?"
-#: ../../services.pm:1
-#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "KompĂŒterinizdə səs sistemı baƟladın"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Delete All NBIs"
+msgstr "Fayl seç"
-#: ../../services.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
msgstr ""
-"rwho protokolu, uzaq istifadəçilərin, rwho vasitəsi iƟlədən bir kompĂŒterdə\n"
-"olan bĂŒtĂŒn istifadəçiləri görmələrina imkan verər."
-#: ../../services.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
+"if set, send the mail report to this email address else send it to root."
msgstr ""
-"rusers protokolu bir Ɵəbəkədəkı istifadəçilərin o Ɵəbəkədəkı kompĂŒterlərdə\n"
-"iƟləyən istifadəçiləri görməsinə imkan verər."
-#: ../../services.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokolu bir Ɵəbəkədəkı istifadəçilərin o Ɵəbəkədəkı hər hansı bir\n"
-"kompĂŒter haqqındakı qabiliyyət ölĂ§ĂŒləri ala bilmələrinə imkan verər."
+msgid "Which configuration of XFree do you want to have?"
+msgstr "Necə bir XFree qurğusunu istəyirsiniz?"
-#: ../../services.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"routed vasitəsi avtomatik IP router cədvəlinin RIP protokolu tərəfindən\n"
-"yenilənməsinə imkan verər. RIP əsasən kiçik Ɵəbəkələrdə istifadə edilir, "
-"daha böyĂŒk\n"
-"Ɵəbəkələrdə daha qarÄ±ĆŸÄ±q routing protokollarına ehtiyacı vardır."
+msgid "More"
+msgstr "Daha Çox"
-#: ../../services.pm:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
msgstr ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
+"Bu təhlĂŒkəsizlik səviyyəsiylə sistemin bir verici olaraq istifadəsi "
+"mĂŒmkĂŒndĂŒr. \n"
+"TəhlĂŒkəsizlik, birdən çox alıcının bağlanmasına icazə verəcək Ɵəkildə "
+"artırılmÄ±ĆŸdır. "
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Account Password"
+msgstr "Hesap Parolu"
+
+#: ../../any.pm:1
#, c-format
msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
msgstr ""
-"YĂŒksək keyfiyyət təsadĂŒfi rəqəm istehsal edən sistem entropi hovuzunun \n"
-"saxlanması və yenidən köhnə halına gətirilməsinə imkan verər."
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
+msgid "Tajik keyboard"
+msgstr "Thai klaviatura"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
msgstr ""
-"Posfix, elektronik məktubların bir kompĂŒterdən digərinə yollayan \n"
-"Elektronik Məktub Yollama Vasitəsidir."
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Font List"
+msgstr "Bağlama nöqtəsi"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
msgstr ""
-"portmapper, NFS ve NIS kimi protokollar tərəfindən istifadə edilən RPC \n"
-"bağlantılarını təƟkilatlandırır. Portmap vericisi RPC mexanizmini iƟlədən\n"
-"protokollarla xidmət edən kompĂŒterlərdə qurulmalıdır və iƟlədilməlidir."
+"Siz Open FÄ°rmware açılÄ±ĆŸ avadanlığınızı açılÄ±ĆŸ yĂŒkləyicisini\n"
+"fəallaƟdırmaq ĂŒĂ§ĂŒn dəyiƟdirməli ola bilərsiniz. Əmr-Seçənək-O-F dĂŒymələrini\n"
+" yenidən baƟlarkən basın və bunları girin:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Sonra da bunları yazın: shut-down\n"
+"Bir sonrakı baƟlanğıcda açılÄ±ĆŸ yĂŒkləyicisi sətirini görməlisiniz."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
msgstr ""
-"PCMCIA dəstəyi, laptoplarda eternet və modem kimi avadanlıqların "
-"dəstəklənməsinə imkan verər.\n"
-"Qurulmadığı vaxtda açılÄ±ĆŸda iƟləməz, iƟləməsinə ehtiyac olmayan\n"
-"kompĂŒterlərdə qurulu olması problem yaratmaz."
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "OKI 4w və uyğun Windows çap edicilərini dəstəklə."
+msgid "Select file"
+msgstr "Fayl seç"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
+"Choose the network or host on which the local printers should be made "
+"available:"
msgstr ""
-"AçılÄ±ĆŸda XFree və konsolda numlock dĂŒyməsini\n"
-"avtomatik olaraq aç."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
msgstr ""
-"NFS TCP/IP Ɵəbəkələrində fayl bölĂŒĆŸĂŒlməsi ĂŒĂ§ĂŒn istifadə edilən məƟhur bir \n"
-"protokoldur. Bu xidmət NFS fayl qıfılı istifadəsinə imkan verər."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS TCP/IP Ɵəbəkələrində fayl bölĂŒĆŸĂŒlməsi ĂŒĂ§ĂŒn istifadə edilən məƟhur bir "
-"protokoldur.\n"
-"Bu xidmət, /etc/exports faylında qurğuları olan NFS vericisinin\n"
-"istifadəsinə imkan verər."
+msgid "Japan"
+msgstr "Yaponiya"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Print option list"
+msgstr "Çap edici seçənəkləri"
+
+#: ../../standalone/localedrake:1
#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
+msgid "The change is done, but to be effective you must logout"
msgstr ""
-"AçılÄ±ĆŸ sırasında baƟlamaq ĂŒĂ§ĂŒn qurulmuƟ bĂŒtĂŒn Ɵəbəkə axtar ĂŒzlərini "
-"fəallaƟdırır ya da qapatır."
-#: ../../services.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Search servers"
+msgstr "DNS verici"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
+msgid "NCP queue name missing!"
msgstr ""
-"BĂŒtĂŒn ƞəbəkə Fayl Sistemlərini (NFS), SMB (Lan Manager/Windows), və \n"
-"NCP (NetWare) bağlama nöqtələrini bağlar və ayırır."
-#: ../../services.pm:1
-#, fuzzy, c-format
+#: ../../standalone/net_monitor:1
+#, c-format
msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
+"Warning, another internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"named (BIND) verici adlarını IP ĂŒnvanlarına çevirən\n"
-"Sahə Adı Vericisidir(DNS)."
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Cd-Rom labeled \"%s\""
+msgstr "\"%s\" adlı Cd-Rom"
#: ../../services.pm:1
#, c-format
msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
msgstr ""
-"Linuks Virtual Verici, yĂŒksək qabiliyyətli vericilər qurmaq ĂŒĂ§ĂŒn iƟlədilir."
+"YĂŒksək keyfiyyət təsadĂŒfi rəqəm istehsal edən sistem entropi hovuzunun \n"
+"saxlanması və yenidən köhnə halına gətirilməsinə imkan verər."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
msgstr ""
-"lpd, lpr'nin dĂŒzgĂŒn olaraq iƟləməsi ĂŒĂ§ĂŒn lazımi çap edici vasitəsidir.\n"
-"lpd əsasən, çap vəzifələrini idarə edən və onları çap ediciyə göndərən "
-"vericidir."
-#: ../../services.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
+msgid "Turn your computer into a reliable server"
msgstr ""
-"Linuxconf sistem qurğularınızı idarə edən proqramları\n"
-"mĂŒxtəlif vəzifələri açılÄ±ĆŸda icra edər."
-#: ../../services.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Texniki avadanlığın açılÄ±ĆŸda avtomatik təsbiti və qurulması."
+msgid " (driver %s)"
+msgstr " (sĂŒrĂŒcĂŒ %s)"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
+"Loopback file(s):\n"
+" %s\n"
msgstr ""
-"/usr/include/linux/{autoconf,version}.h ĂŒĂ§ĂŒn \n"
-"/boot-da avtomatik çəkirdək baƟlığı yaradılması."
+"Loopback faylı:\n"
+" %s\n"
-#: ../../services.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Bu paket /etc/sysconfig/keyboard'dakı seçili klaviatura dĂŒzĂŒlĂŒĆŸĂŒnĂŒ yĂŒklər.\n"
-"Hansı klaviatura dĂŒzĂŒlĂŒĆŸĂŒ istifadə ediləcəyi kbdconfig ilə seçilir.\n"
-"Bu, mandrake qurulan bir çox kompĂŒterdə fəal buraxılmalıdır."
+msgid "I don't know"
+msgstr "Bilmirəm"
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
+msgid ", TCP/IP host \"%s\", port %s"
msgstr ""
-"Linuks 2.2 seriyası çəkirdəklərində firewall\n"
-"qurmaq ĂŒĂ§ĂŒn ĂŒĂ§ĂŒn paket sĂŒzĂŒlməsini baƟlat."
-#: ../../services.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
msgstr ""
-"Internet superserver daemon (qısaca inetd ) bir çox \n"
-"baƟqa internet xidmətcisini lazım gəldiyi zaman iƟa salır. İçində telnet, "
-"ftp, rsh və rlogin kimi proqramın olduğu xidmətləri iƟə salmaqla məs'uldur.\n"
-"inetd-ni sistemden çıxarmaq, onun məs'ul olduğu bĂŒtĂŒn xidmətləri\n"
-"rədd etmək mənasını daĆŸÄ±yır."
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
msgstr ""
-"Apache bir World Wide Web vericisidir. HTML faylları və CGI verilməsi ĂŒĂ§ĂŒn "
-"istifadə edilir."
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Post Uninstall"
+msgstr "Qurulumdan çıx"
+
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
+msgid " ("
msgstr ""
-"HardDrake texniki tə'minat sınağı aparar və onları bir ön quraƟdırmadan "
-"keçirər."
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cpuid level"
+msgstr "TəhlĂŒkəsizlik səviyyəsinin quraƟdırılması"
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Mongolian (cyrillic)"
+msgstr "Azərbaycanca (kiril)"
+
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM, Midnight Commander kimi mətn əsaslı tə'minatlara siçan dəstəyi əlavə "
-"edər.\n"
-"Ayrıca konsolda siçanla kəsmə və yapÄ±ĆŸdırma əməliyyatlarına da imkan verər.\n"
-"Konsolda pop-up menyu dəstəyi verər."
+msgid "Add a module"
+msgstr "Modul əlavə et"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron, istifadəçilərə xĂŒsusi əmrləri periodik olaraq iƟə sala bilən\n"
-"standart bir UNIX proqramıdır. vixie cron, standart cron'a əlavə edilmiƟ bir "
-"çox\n"
-"yeni xĂŒsusiyyət daxildir."
+msgid "Profile to delete:"
+msgstr "Silinəcək profil:"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Local measure"
+msgstr "Yerli Çap Edici"
+
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
+msgid "busmouse"
+msgstr "busmouse"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Account Login (user name)"
+msgstr "Hesab GiriƟi (istifadəçi adı)"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Fdiv bug"
msgstr ""
-"at əmri, zamanlanan əmrləri iƟləmələri lazım gələn vaxtda iƟlədir.\n"
-"Sistem yĂŒkĂŒ lazımi qədər alçaq olduğunda yığma əmrləri iƟlədilir."
-#: ../../services.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
msgstr ""
-"apmd batareya vəziyyətini izləmək ĂŒĂ§ĂŒn və syslog aracılığıyla bunun qeydini "
-"tutmaq ĂŒĂ§ĂŒn istifadə edilir.\n"
-"Ayrıca batareya azaldığında sistemi qapatmaq ĂŒĂ§ĂŒn də istifadə edilir."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anakron, periodik əmr zamanlayıcısı"
+msgid "Benin"
+msgstr "Benin"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "ALSA səs sistemini (Advanced Linux Sound Architecture) baƟlat"
+msgid "Uruguay"
+msgstr "Uruqvay"
-#: ../../standalone.pm:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Installing packages..."
-msgstr "%s paketi qurulur"
+msgid "Path selection"
+msgstr "Paket seçkilərini saxla"
-#: ../../standalone.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+msgid "Name/IP address of host:"
msgstr ""
-#: ../../standalone.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
+msgid "Monitor: %s\n"
+msgstr "Monitor: %s\n"
+
+#: ../../partition_table/raw.pm:1
+#, fuzzy, c-format
msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
msgstr ""
+"Bə'zən sĂŒrĂŒcĂŒnĂŒzdə pis Ɵeylər ola bilər.\n"
+"Datanın bĂŒtövlĂŒyĂŒ yoxlaması bacarılmadı. \n"
+"Bu o demekdir ki diskə yazılan hər Ɵey təsadĂŒfi olacaqdır"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer host name or IP missing!"
+msgstr "Çap Edici Ev sahibi"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check all users that you want to include in your backup."
+msgstr "XahiƟ edirik qurmaq istədiyiniz paketləri seçin."
+
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
msgstr ""
-#: ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
-msgstr ""
+msgid "Bangladesh"
+msgstr "BanqladeƟ"
-#: ../../standalone.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "Japan (cable)"
msgstr ""
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
-#: ../../standalone.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Initial tests"
+msgstr "İnit İsmarıcı"
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr ""
+msgid "Continue"
+msgstr "Davam et"
-#: ../../standalone.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "[keyboard]"
-msgstr "Klaviatura"
+msgid "Custom Restore"
+msgstr "XĂŒsusi"
-#: ../../standalone.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
msgstr ""
-#: ../../standalone.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
+msgid "Script-based"
+msgstr "Skript əsaslı"
+
+#: ../../install_any.pm:1 ../../partition_table.pm:1
+#, c-format
+msgid "Error reading file %s"
+msgstr "%s faylı oxunurkan xəta oldu"
+
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "PLL setting:"
+msgstr "ƞəkilləndirilir"
+
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#, fuzzy, c-format
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "Bir swap sahəsinə ehtiyacınız var"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid " on "
msgstr ""
-#: ../../standalone.pm:1
+#: ../../diskdrake/dav.pm:1
+#, c-format
+msgid "The URL must begin with http:// or https://"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
msgstr ""
+#: ../../any.pm:1
+#, c-format
+msgid "Other OS (SunOS...)"
+msgstr "Digər sistemlər (SunOS...)"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Install/Upgrade"
+msgstr "Qurulum/GĂŒncəlləmə"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "%d packages"
+msgstr "%d paket"
+
#: ../../standalone.pm:1
#, c-format
msgid ""
@@ -6734,3946 +6093,4265 @@ msgid ""
"--version : show version number.\n"
msgstr ""
-#: ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Domain Authentication Required"
+msgstr "Tanıtma"
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
msgstr ""
-#: ../../steps.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Exit install"
-msgstr "Qurulumdan çıx"
+msgid "Costa Rica"
+msgstr "Kosta Rika"
-#: ../../steps.pm:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Install updates"
-msgstr "Sistemi qur"
+msgid "Use libsafe for servers"
+msgstr "X verici ĂŒĂ§ĂŒn seçənəkləri göstərin"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configure services"
-msgstr "Xidmətləri qur"
+msgid "Icelandic"
+msgstr "Ä°zlandiya dili"
-#: ../../steps.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Configure X"
-msgstr "X qur"
+msgid ""
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
-#: ../../steps.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Install bootloader"
-msgstr "Sistem yĂŒkləyicini qur"
+msgid "Please relog into %s to activate the changes"
+msgstr "\"%s\"a(ə) təkrar girin və dəyiƟiklikləri fəallaƟdırın"
-#: ../../steps.pm:1
+#: ../../my_gtk.pm:1
#, c-format
-msgid "Configure networking"
-msgstr "ƞəbəkəni qur"
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr ""
-#: ../../steps.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Add a user"
-msgstr "İstifadəçi əlavə et"
+msgid "Lilo/grub mode"
+msgstr "Lilo/grub modu"
-#: ../../steps.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Root password"
-msgstr "Root parolunu qur"
+msgid "Output"
+msgstr "Nəticə"
-#: ../../steps.pm:1
+#: ../../loopback.pm:1
#, c-format
-msgid "Install system"
-msgstr "Sistemi qur"
+msgid "Circular mounts %s\n"
+msgstr "Dairəvi bağlama %s\n"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose packages to install"
-msgstr "Qurulacaq paketləri seçin"
+msgid "Martinique"
+msgstr "Martiniq"
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Format partitions"
-msgstr "Bölmə Ɵəkilləndirilməsi"
+msgid "HardDrive / NFS"
+msgstr ""
-#: ../../steps.pm:1
+#: ../../modules/parameters.pm:1
#, fuzzy, c-format
-msgid "Partitioning"
-msgstr "Çap Edici"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Choose your keyboard"
-msgstr "Klaviaturanızı seçin"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Select installation class"
-msgstr "QuruluƟ sinifini seçin"
+msgid "a number"
+msgstr "Telefon nömrəsi"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Hard drive detection"
-msgstr "Sabit disk seçkisi"
+msgid "Swedish"
+msgstr "İsveçcə"
-#: ../../steps.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Configure mouse"
-msgstr "Siçan qurğuları"
+msgid "Which %s driver should I try?"
+msgstr "Hansı %s sĂŒrĂŒcĂŒsĂŒ sınansın?"
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "License"
+msgid ""
+"You will receive an alert if one of the selected services is no longer "
+"running"
msgstr ""
-#: ../../steps.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Language"
-msgstr "İƟlətdiyiniz dili seçin"
+msgid "Filesystem types:"
+msgstr "Fayl sistemi növĂŒ:"
-#: ../../ugtk2.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "utopia 25"
+msgid ", multi-function device on HP JetDirect"
msgstr ""
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "OK"
-msgstr "Oldu"
+msgid "Northern Mariana Islands"
+msgstr "ƞimali Marian Adaları"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "logdrake"
-msgstr "logdrake"
+msgid "none"
+msgstr "heç biri"
-#: ../../ugtk.pm:1
-#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "user :"
+msgstr "Ä°stifadəçi adı"
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Xpmac (installation display driver)"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please enter your password"
+msgstr "XahiƟ edirik təkrar sınayın"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
msgstr ""
-"Sizin kartınızın XFree %s ilə 3D dəstəyi ola bilər.\n"
-"DÄ°QQƏT! BU SINAQ MƏRHƏLƏSINDƏDIR VƏ KOMPÜTERÄ°NÄ°Z DONDURA BILƏR."
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "SINAQ MƏRHƏLƏSÄ°NDƏKÄ° 3D sĂŒr'ətləndirmə dəstəkli XFree %s"
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Sizin kartınızın XFree %s ilə 3D dəstəyi ola bilər."
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "3D avadanlıq sĂŒr'ətləndirməsi ilə XFree %s"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Floppy"
+msgstr "Disketə qeyd et"
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Sizin kartınızın 3D sĂŒr'ətləndirmə dəstəyi ola bilər, amma sadecə olaraq "
-"XFree %s\n"
-"ilə dĂŒzgĂŒn iƟləyər.\n"
-"DÄ°QQƏT! BU SINAQ MƏRHƏLƏSINDƏDIR VƏ KOMPÜTERÄ°NÄ°Z DONDURA BILƏR.\n"
-"Sizin kartınıza XFree %s tərəfindən dəstək verilir ve bu 2D ĂŒĂ§ĂŒn daha yaxĆŸÄ± "
-"bir seçki olar."
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "XahiƟ edirik bir bölmə ĂŒstĂŒnə tıqlayın"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+msgid "Ghostscript referencing"
msgstr ""
-"Sizin kartınızın 3D sĂŒr'ətləndirmə dəstəyi ola bilər, amma sadecə olaraq "
-"XFree %s\n"
-"ilə dĂŒzgĂŒn iƟləyər.\n"
-"Sizin kartınıza XFree %s tərəfindən dəstək verilir ve bu 2D ĂŒĂ§ĂŒn daha yaxĆŸÄ± "
-"bir fikir olar."
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfig/card.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Təkcə \"%s\" kartını qur (%s)"
+msgid "Bootloader"
+msgstr "Ä°stifadə ediləcək AçılÄ±ĆŸ idarəcisi"
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Use Xinerama extension"
-msgstr "Xinerama ifadələrini iƟlət"
+msgid "Move"
+msgstr "DaĆŸÄ±"
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Configure all heads independently"
-msgstr "BĂŒtĂŒn baƟlıqları ayrı ayrı quraƟdır"
+msgid "Bootloader to use"
+msgstr "Ä°stifadə ediləcək AçılÄ±ĆŸ idarəcisi"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Necə bir XFree qurğusunu istəyirsiniz?"
+msgid "SMB server host"
+msgstr "SMB verici adı"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Name Servers:"
+msgstr "NIS Verici"
+
+#: ../../install_messages.pm:1
#, c-format
-msgid "XFree configuration"
-msgstr "XFree quraƟdırılması"
+msgid ""
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
+msgstr ""
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a Ɵəbəkə. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Ekran kartınızın yaddaƟ böyĂŒklĂŒyĂŒnĂŒ seçin"
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgstr ""
-#: ../../Xconfig/card.pm:1
-#, fuzzy, c-format
+#: ../../services.pm:1
+#, c-format
msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
msgstr ""
-"Sizin sisteminiz çoxlu baƟlıq quraƟdırmasını dəstəkləyir.\n"
-"Nə etmək istəyirsiniz?"
+"Linuks Virtual Verici, yĂŒksək qabiliyyətli vericilər qurmaq ĂŒĂ§ĂŒn iƟlədilir."
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Multi-head configuration"
-msgstr "Çoxlu BaƟlıq quraƟdırılması"
-
-#: ../../Xconfig/card.pm:1
-#, fuzzy, c-format
-msgid "Choose an X server"
-msgstr "Bir X vericisi seçin"
+msgid "4 billion colors (32 bits)"
+msgstr "4 milyard rəng (32 bits)"
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "X server"
-msgstr "X verici"
+msgid "Micronesia"
+msgstr "Mikroneziya"
-#: ../../Xconfig/card.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "64 MB or more"
-msgstr "64 MB və ya daha çox"
+msgid "License"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "32 MB"
-msgstr "32 MB"
+msgid "This may take a moment to generate the keys."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "16 MB"
-msgstr "16 MB"
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "8 MB"
-msgstr "8 MB"
+msgid "Sagem (using pppoa) usb"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "4 MB"
-msgstr "4 MB"
+msgid ""
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
+msgstr ""
+"Bir xəta oldu. Yeni fayl sisteminin yaradılacağı hökmlĂŒ bir sĂŒrĂŒcĂŒ "
+"tapılmadı. Bu problemin qaynağı ĂŒĂ§ĂŒn avadanlığınızı yoxlayın"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Starting the printing system at boot time"
+msgstr "Hansı çap edici sistemini istifadə etmək istəyirsiniz?"
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "2 MB"
-msgstr "2 MB"
+msgid "Do you want to start the connection at boot?"
+msgstr "Bağlantınızı açılÄ±ĆŸda baƟlatmaq istəyirsiniz?"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "1 MB"
-msgstr "1 MB"
+msgid "Processor ID"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "512 kB"
-msgstr "512 kB"
+msgid "Sound trouble shooting"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "256 kB"
-msgstr "256 kB"
+msgid "Polish (qwerty layout)"
+msgstr "Polyakca (QWERTY sırası)"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "activate now"
+msgstr "Fəal"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
"\n"
-"%s"
-msgstr ""
-"Mövcud qurğuları saxlayım?\n"
-"Hal-hazırkı qurğular:\n"
+"Drakbackup activities via CD:\n"
"\n"
-"%s"
+msgstr ""
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Options"
-msgstr "Seçənəklər"
+msgid ""
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
+msgstr ""
-#: ../../Xconfig/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Test"
+msgid "Host \"%s\", port %s"
msgstr ""
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Resolution"
-msgstr "Rezolyusiya"
+msgid "This partition can't be used for loopback"
+msgstr "Bu disk bölməsi loopback ĂŒĂ§ĂŒn iƟlədilməz"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfig/main.pm:1
-#, fuzzy, c-format
-msgid "Graphic Card"
-msgstr "Ekran kartı"
+msgid "File already exists. Use it?"
+msgstr "Fayl onsuz da vardır. İƟlədilsin?"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Vertical refresh rate"
-msgstr "ƞaquli yeniləmə sĂŒr'əti"
+msgid "received: "
+msgstr ""
-#: ../../Xconfig/monitor.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "ÜfĂŒqi yeniləmə sĂŒr'əti"
+msgid "Right Alt key"
+msgstr ""
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
+msgid "the list of alternative drivers for this sound card"
msgstr ""
-"Buradaki iki vacib parametr ĂŒfĂŒqi ve Ɵaquli yeniləmə sĂŒr'ətləridir.\n"
-"Seçərkən monitorunuzun qabiliyyətinin ĂŒstĂŒndə bir parametr\n"
-"seçməməyiniz çox vacibdir, əks halda monitor zərər görər.\n"
-"Seçərkən bir qərarsızlığa dĂŒĆŸÉ™rsəniz, alçaq rezolyusiya seçin."
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr ""
+msgid "Gateway"
+msgstr "Keçit"
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Vendor"
-msgstr "Geri al"
+msgid "Scanner sharing"
+msgstr "Çap Edici"
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Plug'n Play"
-msgstr ""
+msgid "Tonga"
+msgstr "Tonqa"
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose a monitor"
-msgstr "Monitorunuzu seçin"
+msgid "Tunisia"
+msgstr "Tunis"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Graphics card: %s"
-msgstr "Ekran kartı: %s"
+msgid "Profile: "
+msgstr "Profil: "
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Rezolyusiya və rəng dərinliyini seçin"
+msgid ""
+"Click on a device in the left tree in order to display its information here."
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Resolutions"
-msgstr "Rezolyusiyalar"
+msgid "XawTV isn't installed!"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 milyard rəng (32 bits)"
+msgid ""
+"Create/Transfer\n"
+"backup keys for SSH"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 milyon rəng (24 bits)"
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 min rəng (16 bits)"
+msgid "old static device name used in dev package"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 min rəng (15 bits)"
+msgid "This label is already used"
+msgstr "Bu etiket istifadə edilməz"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 rəng (8 bits)"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
-#: ../../Xconfig/test.pm:1
-#, fuzzy, c-format
-msgid "Is this the correct setting?"
-msgstr "Doğrudur?"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "After formatting partition %s, all data on this partition will be lost"
+msgstr ""
+"%s bölməsi Ɵəkilləndirildikdən sonra bu bölmədəki bĂŒtĂŒn mə'lumatlar "
+"silinəcəkdir"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d saniyə sonra çıxılacaq"
+msgid "Connection Time: "
+msgstr "Bağlantı növĂŒ:"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "select perm file to see/edit"
+msgstr ""
+
+#: ../../standalone/livedrake:1
#, c-format
msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
+"Qurma Cd-Romunu sĂŒrĂŒcĂŒnĂŒzə taxın və OLDUya basın.\n"
+"Əgər Cd-Rom əlinizdə yox isə, bu Cd-Rom-dan qurmamaq ĂŒĂ§ĂŒn RƏDD ETə basın."
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Diqqət: Bu qrafika kartı ilə ediləcək sınaq təhlĂŒkəlidir"
+msgid "Use group id for execution"
+msgstr "Avtomatik təsbit iƟlət"
-#: ../../Xconfig/test.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Qurğuları sınamaq istəyirsiniz?"
+msgid "Choose the default user:"
+msgstr "Əsas istifadəçini seçin:"
-#: ../../Xconfig/test.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Test of the configuration"
-msgstr "Qurğuların sınağı"
+msgid "Gabon"
+msgstr "Qabon"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "What norm is your TV using?"
-msgstr "ISDN bağlantınızın növĂŒ nədir?"
-
-#: ../../Xconfig/various.pm:1
-#, c-format
msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
msgstr ""
+"Uzaq CUPS vericiləri ĂŒĂ§ĂŒn heç bir quraƟdırmağa lĂŒzĂŒm yoxdur\n"
+"Buradakı hər çap edici avtomatik tapılacaqdır.\n"
+"Olmazsa \"Uzaq CUPS vericisi\" ni seçin."
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
-msgstr ""
-"KompĂŒterinizi avtomatik olaraq X ilə açılması ĂŒĂ§ĂŒn qura bilərəm.\n"
-"AçılÄ±ĆŸda X Window ilə baƟlamaq istəyirsiniz?"
-
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "X ilə AçılÄ±ĆŸ"
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
+msgstr "Qurulumdan sonra istifadə edə biləcəyiniz baƟqa dillər seçə bilərsiniz"
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 sĂŒrĂŒcĂŒ: %s\n"
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Domain"
+msgstr "NIS sahəsi"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 verici: %s\n"
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "Ümumi yaddaƟ miqdarı (%d MB tapıldı)"
-#: ../../Xconfig/various.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Resolution: %s\n"
-msgstr "Rezolyusiya: %s\n"
+msgid ""
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
+"\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
+"\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
+msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Color depth: %s\n"
-msgstr "Rəng dərinliyi: %s\n"
+msgid "Provider dns 2 (optional)"
+msgstr "Dns xidmətcisi 2 (arzuya görə)"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Ekran kartı yaddaĆŸÄ±: %s KB\n"
+msgid "Boot device"
+msgstr "AçılÄ±ĆŸ avadanlığı"
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Ekran kartı: %s\n"
+msgid "Which partition do you want to resize?"
+msgstr "Hansı bölmənin böyĂŒklĂŒyĂŒnĂŒ dəyiƟdirəcəksiniz?"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitorun ÜfĂŒqi Yeniləməsi: %s\n"
+msgid "United States Minor Outlying Islands"
+msgstr "BirləƟmiƟ ƞtatlar yanı Kiçik Adalar"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitorun ƞaquli Daraması: %s\n"
+msgid "A tool to monitor your logs"
+msgstr "Qeydlərinizə baxan vasitə"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
+msgid "Djibouti"
+msgstr "Cibuti"
-#: ../../Xconfig/various.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Siçan avadanlığı: %s\n"
+msgid "detected on port %s"
+msgstr "%s qapısında tapıldı"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Siçan növĂŒ: %s\n"
+msgid "LPD"
+msgstr ""
#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Klavatura dĂŒzĂŒlĂŒĆŸĂŒ: %s\n"
+msgid "Graphics card: %s\n"
+msgstr "Ekran kartı: %s\n"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Options: %s"
-msgstr "Seçənəklər: %s"
+msgid "Yaboot"
+msgstr "Yaboot"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Mount point: "
-msgstr "Bağlama nöqtəsi: "
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you are using a DVDRAM device"
+msgstr "XahiƟ edirik bir bölmə ĂŒstĂŒnə tıqlayın"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakboot:1
#, fuzzy, c-format
-msgid "Server: "
-msgstr "Verici"
+msgid "Splash selection"
+msgstr "Paket seçkilərini saxla"
-#: ../../diskdrake/dav.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr ""
-
-#: ../../diskdrake/dav.pm:1
-#, fuzzy, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "XahiƟ edirik siçanınızı seçin"
+msgid "Extended partition not supported on this platform"
+msgstr "Bu platformda geniƟlədilmiƟ bölmələr dəstəklənmir"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Mount point"
-msgstr "Bağlama nöqtəsi"
+msgid "ISDN Configuration"
+msgstr "ISDN quraƟdırılması"
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "high"
+msgstr "YĂŒksək"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Server"
-msgstr "Verici"
+msgid "Internet Connection Sharing"
+msgstr "Ä°nternet Bağlantısı BölĂŒĆŸdĂŒrĂŒlməsi"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Mount"
-msgstr "Bağla"
+msgid "Choose file"
+msgstr "Fayl seç"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Unmount"
-msgstr "Ayır"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
+msgstr ""
+"Diqqət! Var olan Firewall qurğusu tapıldı. YĂŒkləmədən sonra bir az əl "
+"gəzdirə bilərsiniz."
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "New"
-msgstr "yeni"
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "ƞəbəkə dayandırılır"
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Yerinə ``%s'' iƟlət"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer default settings"
+msgstr "Çap Edici Bağlantısı"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Type"
-msgstr "Növ"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Sıravi PS2 Çərxli Siçan"
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Əvvəlcə ``Ayır'-ı iƟlət"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Removing old printer \"%s\"..."
+msgstr "CUPS sĂŒrĂŒcĂŒ datası oxunur..."
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Delete"
-msgstr "Sil"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Select a device !"
+msgstr "Ekran kartınızı seçin"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Create"
-msgstr "Yarat"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove selected server"
+msgstr "Növbəni sil"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Filesystem types:"
-msgstr "Fayl sistemi növĂŒ:"
+msgid "French Southern Territories"
+msgstr "Cənubi Fransız Sahələri"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Empty"
-msgstr "BoƟ"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
-msgid "Windows"
-msgstr "NIS sahəsi"
+msgid "the vendor name of the processor"
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "All data on this partition should be backed-up"
+msgstr "Bu bölmədəki bĂŒtĂŒn mə'lumatlar yedəklənməlidir"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "Installing package %s"
+msgstr "%s paketi qurulur"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
-msgid "Journalised FS"
-msgstr "bağlama iflas etdi"
+msgid "Checking device and configuring HPOJ..."
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
-msgid "No hard drives found"
-msgstr "Yerli Çap Edici"
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
+msgstr "Artıq bölmə yaratmaq ĂŒĂ§ĂŒn, bir bölməni silib məntiqi bölmə yaradın"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please click on a partition"
-msgstr "XahiƟ edirik bir bölmə ĂŒstĂŒnə tıqlayın"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
msgstr ""
-"Tək bir böyĂŒk disk bölməniz var\n"
-"(əsasən MS DOS/Windows istifadə edər).\n"
-"Əvvəlcə bu disk bölməsinin böyĂŒklĂŒyĂŒnĂŒ dəyiƟdirməyinizi\n"
-"tövsiyə edirik. Əvvəlcə bölmənin ĂŒstĂŒnə, sonra \"BöyĂŒklĂŒyĂŒ\n"
-"DəyiƟdir\" dĂŒyməsinə tıqlayın"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Choose action"
-msgstr "Monitorunuzu seçin"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Wizard"
-msgstr "Sehirbaz"
+msgid "Choose packages to install"
+msgstr "Qurulacaq paketləri seçin"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
msgstr ""
-"Aboot istifadə etməyi istəyirsinizsə, boƟ disk sahəsi (2048 sektor bəsdir.)\n"
-"buraxmayı unutmayın."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Əvvəlcə datanızın yedəyini alın"
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr ""
+"%s bölĂŒməsinin böyĂŒklĂŒyĂŒ dəyiƟdirildikdən sonra bu bölmədəki bĂŒtĂŒn "
+"mə'lumatlar silinəcəkdir"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Read carefully!"
-msgstr "Diqqətlə Oxuyun!"
+msgid ""
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
+msgstr ""
+"Sisteminizdə qurulum ya da gĂŒncəlləmə ĂŒĂ§ĂŒn lazımi boƟ yer yoxdur(%d > %d)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Encryption key (again)"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Encryption key"
+msgid ""
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "The encryption keys do not match"
-msgstr "Parollar uyğun gəlmir"
+#: ../../lang.pm:1
+#, c-format
+msgid "Bhutan"
+msgstr "Butan"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Network interface"
+msgstr "ƞəbəkə ara ĂŒzĂŒ"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Bu parol çox sadədir (en az %d xarakter boyunda olmalıdır)"
+msgid "Reading printer data..."
+msgstr "CUPS sĂŒrĂŒcĂŒ datası oxunur..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr ""
+msgid "Korean keyboard"
+msgstr "Koreya klaviaturası"
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Filesystem encryption key"
-msgstr "Fayl sistemi növĂŒ: "
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Not connected"
+msgstr "Bağlı deyil"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Type: "
-msgstr "Növ: "
+msgid "Greek"
+msgstr "Yunanca"
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "on channel %d id %d\n"
-msgstr "%d data yolunda, %d nö'li\n"
+#: ../../security/help.pm:1
+#, c-format
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Bölmə cədvəli növĂŒ: %s\n"
+msgid "Saint Kitts and Nevis"
+msgstr "MĂŒqəddəs Kit və Nevis"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diskləri %s\n"
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Info: "
-msgstr "Mə'lumat: "
+msgid "Enable OF Boot?"
+msgstr "OF AçılÄ±ĆŸÄ± FəallaƟdırım?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometriyası: %s silindr, %s baƟ, %s sektor\n"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "16MB dən kiçik disk bölmələrində JFS istifadə etməlisiniz"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Size: %s\n"
-msgstr "BöyĂŒklĂŒk: %s\n"
+msgid "Monitor VertRefresh: %s\n"
+msgstr "Monitorun ÜfĂŒqi Yeniləməsi: %s\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Read-only"
+msgid "path"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Device: "
-msgstr "Avadanlıq: "
+msgid "Mount point"
+msgstr "Bağlama nöqtəsi"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
msgstr ""
-"\n"
-"Bu, ikili açılÄ±ĆŸ ĂŒĂ§ĂŒn xĂŒsusi\n"
-"Bootstrap-dır.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
+msgid "Restore system"
+msgstr "Sistemi qur"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
msgstr ""
-"\n"
-"Bəlkə də bu bir SĂŒrĂŒcĂŒ bölməsidir.\n"
-"Onda bunu ele beləcə buraxın.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback faylı adı: %s"
+msgid "The DHCP end ip"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diskləri %s\n"
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Another one"
+msgstr "Ä°nternet"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Chunk size %s\n"
-msgstr "Parça böyĂŒklĂŒyĂŒ %s\n"
+msgid "Drakbackup"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Level %s\n"
-msgstr "Səviyyə %s\n"
+msgid "Colombia"
+msgstr "Kolumbiya"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
+"Current configuration of `%s':\n"
+"\n"
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
msgstr ""
-"Ana açılma bölməsi\n"
-" (MS-DOS açılÄ±ĆŸÄ± ĂŒĂ§ĂŒn)\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
+msgid "Plug'n Play"
msgstr ""
-"Loopback faylı:\n"
-" %s\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+msgid "Reunion"
+msgstr "Reyunion"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Mounted\n"
-msgstr "Bağlı\n"
+msgid "Details"
+msgstr "Ətraflı"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Not formatted\n"
-msgstr "ƞəkilləndirilməmiƟ\n"
+#: ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "For security reasons, it will be disconnected now."
+msgstr "TəhlĂŒkəsizlik səbəbi ilə indi bağlantı qopacaqdır."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Formatted\n"
-msgstr "ƞəkilləndirilmiƟ\n"
+msgid "Synchronization tool"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Silindr %d -dən silindr %d-yə\n"
+msgid "Checking your system..."
+msgstr "Hansı çap edici sistemini istifadə etmək istəyirsiniz?"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektor"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Print"
+msgstr "Çap Edici"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Size: %s"
-msgstr "BöyĂŒklĂŒyĂŒ: %s"
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Start: sector %s\n"
-msgstr "BaƟlanğıc: sektor %s\n"
+msgid "Mongolia"
+msgstr "Monqolustan"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Name: "
-msgstr "Ad: "
+msgid "Mounted\n"
+msgstr "Bağlı\n"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS sĂŒrĂŒcĂŒ hərfi: %s (sadəcə təxmini)\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Graphical Interface"
+msgstr "X ilə AçılÄ±ĆŸ"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore Users"
+msgstr "Fayldan geri çağır"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Rezolyusiya: %s\n"
+msgid "Encryption key for %s"
+msgstr "Parollar uyğun gəlmir"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Copying %s"
+msgid ""
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
+"portmapper, NFS ve NIS kimi protokollar tərəfindən istifadə edilən RPC \n"
+"bağlantılarını təƟkilatlandırır. Portmap vericisi RPC mexanizmini iƟlədən\n"
+"protokollarla xidmət edən kompĂŒterlərdə qurulmalıdır və iƟlədilməlidir."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Moving files to the new partition"
-msgstr "Yeni bölmələr ĂŒĂ§ĂŒn boƟ sahə yoxdur"
+msgid "Detected hardware"
+msgstr "Avadanlıq mə'lumatına bax"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+msgid "Mauritius"
+msgstr "Maurit"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Myanmar (Burmese)"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, fuzzy, c-format
-msgid "Hide files"
-msgstr "mkraid iflas etdi"
+msgid "Enabling swap partition %s"
+msgstr "ƞəkilləndirilən bölmə: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, fuzzy, c-format
-msgid "Move files to the new partition"
-msgstr "Yeni bölmələr ĂŒĂ§ĂŒn boƟ sahə yoxdur"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"%s bölməsi Ɵəkilləndirildikdən sonra bu bölmədəki bĂŒtĂŒn mə'lumatlar "
-"silinəcəkdir"
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgstr "FAT bölməsi yoxdur ya da loopback ĂŒĂ§ĂŒn lazımi yer buraxılmayıb"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Yeni qurğuların fəallaƟmağı ĂŒĂ§ĂŒn sistemi yenidən baƟlatmalısınız"
+msgid "Armenian (old)"
+msgstr "Ermenicə (köhnə) "
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "%s sĂŒrĂŒcĂŒsĂŒnĂŒn bölmə cədvəli diskə yazılacaq!"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "The package %s is needed. Install it?"
+msgid ""
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
msgstr ""
-"Bu paket yenilənməlidir\n"
-"Sistemdən çıxarmaq mövzusunda ciddisiniz?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "What type of partitioning?"
-msgstr "Nəcə bölməlandirmə istəyirsən?"
+msgid ""
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Diqqətlı olun: bu əməliyyat təhlĂŒkəlidir."
+msgid ", host \"%s\", port %s"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "chunk size"
-msgstr "parça böyĂŒklĂŒyĂŒ"
+msgid "Monaco"
+msgstr "Monako"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "level"
-msgstr "səviyyə"
+msgid "%s formatting of %s failed"
+msgstr "%s Ɵəkilləndirilməsində %s bölmə xətası"
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "device"
-msgstr "avadanlıq"
+msgid "Partitioning failed: %s"
+msgstr "Bölmə cədvəli növĂŒ: %s"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Various"
-msgstr ""
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "Canada (cable)"
+msgstr "Fransızca (Kanada/Quebec)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Mount options"
-msgstr "Modul seçənəkləri:"
+msgid "Upgrade"
+msgstr "GĂŒncəlləmə"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "File already exists. Use it?"
-msgstr "Fayl onsuz da vardır. İƟlədilsin?"
+msgid "Workstation"
+msgstr "Masa ĂŒstĂŒ"
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "File is already used by another loopback, choose another one"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid ""
+"Installing package %s\n"
+"%d%%"
msgstr ""
-"Fayl baƟqa bir loopback tərəfindən istifadədədir, baƟqa\n"
-"birini seçin"
+"%s paketi qurulur\n"
+"%d%%"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Kyrgyzstan"
+msgstr "Qırğızıstan"
+
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Give a file name"
-msgstr "Həqiqi adı"
+msgid "With basic documentation"
+msgstr "Sənədlər"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Filesystem type: "
-msgstr "Fayl sistemi növĂŒ: "
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anakron, periodik əmr zamanlayıcısı"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Size in MB: "
-msgstr "MB cinsindən böyĂŒklĂŒk: "
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"Bir root disk bölĂŒmĂŒna ehtiyacınız var.\n"
+"Bunun ĂŒĂ§ĂŒn istər mövcud bir disk bölĂŒmĂŒ ĂŒzərina tıqlayın, \n"
+"ya da yeni birini baƟdan yaradın. Sonra \"Bağlama \n"
+"Nöqtəsi\"nə gəlin va burayı '/' olaraq dəyiƟdirin."
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Loopback file name: "
-msgstr "Loopback fayl adı: "
+msgid "Proxy should be http://..."
+msgstr "Vəkil verici http://... Ɵəklində olmalıdır."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Loopback"
-msgstr "Loopback"
+msgid "South Africa"
+msgstr "Cənubi Afrika"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "Bu disk bölməsi loopback ĂŒĂ§ĂŒn iƟlədilməz"
+msgid "Western Sahara"
+msgstr "Qərbi Saxara"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "LVM name?"
-msgstr "LVM adı?"
+msgid "Etherboot Floppy/ISO"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "new"
-msgstr "yeni"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Modify printer configuration"
+msgstr "İnternet qurğuları"
#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Choose a partition"
+msgstr "Monitorunuzu seçin"
+
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Əlavə etmək ĂŒĂ§ĂŒn mövcud bir LVM seçin"
+msgid "Edit current rule"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Əlavə etmək ĂŒĂ§ĂŒn mövcud bir RAID seçin"
+msgid "%s"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Moving partition..."
-msgstr "Bölmə daĆŸÄ±nır..."
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Moving"
-msgstr "DaĆŸÄ±nır"
+msgid "Please test the mouse"
+msgstr "XahiƟ edirik siçanınızı seçin"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Other Media"
+msgstr "Digər"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup system files"
+msgstr "Xətalı yedəkləmə faylı"
+
+#: ../../mouse.pm:1
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "Hansı sektora daĆŸÄ±maq istəyirsiniz?"
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Sector"
msgstr "Sektor"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "Hansı diskə daĆŸÄ±maq istəyirsiniz?"
+msgid "Qatar"
+msgstr "Katar"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Move"
-msgstr "DaĆŸÄ±"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "New size in MB: "
-msgstr "MB cinsindən böyĂŒklĂŒk: "
+msgid "LDAP Base dn"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Choose the new size"
-msgstr "Yeni böyĂŒklĂŒk seçin"
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr "Bu paketi seçə bilməzsiniz, Ă§ĂŒnki qurmaq ĂŒĂ§ĂŒn yer çatmır."
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Resize"
-msgstr "BöyĂŒklĂŒyĂŒnĂŒ DəyiƟdir"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "generate auto-install floppy"
+msgstr "Avtomatik qurulum disketi hazırlanır"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"%s bölməsi böyĂŒklĂŒyĂŒ dəyiƟdirildirkdən sonra bu bölmədəki bĂŒtĂŒn mə'lumatlar "
-"silinəcəkdir"
+msgid "Dialing mode"
+msgstr "Yığma modu"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Bu bölmədəki bĂŒtĂŒn mə'lumatlar yedəklənməlidir"
+msgid "File sharing"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "This partition is not resizeable"
-msgstr "Hansı bölmə növĂŒnĂŒ istəyirsiniz?"
+msgid "Clean /tmp at each boot"
+msgstr "/tmp-i hər açılÄ±ĆŸda təmizlə"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Fat fayl sistemi ucları hesaplanır"
+msgid "Malawi"
+msgstr "Malavi"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Where do you want to mount %s?"
-msgstr "%s avadanlığını haraya bağlamaq istəyirsiniz?"
+msgid "Please choose your type of mouse."
+msgstr "XahiƟ edirik siçanınızın növĂŒnĂŒ seçin."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "class of hardware device"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
msgstr ""
-"Bu disk bölməsi loopback ĂŒĂ§ĂŒn istifadə edildiyindən ötrĂŒ bağlanma "
-"nöqtəsindən ayrıla bilinmir.\n"
-"Əvvəlcə loopback-ı ləğv edin."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "%s avadanlığını haraya bağlamaq istəyirsiniz?"
+msgid "United Kingdom"
+msgstr "BirləƟmiƟ Krallıq"
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "%s loopback avadanlığını haraya bağlamaq istəyirsiniz?"
+#: ../../services.pm:1
+#, c-format
+msgid "running"
+msgstr "iƟləmir"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr ""
+msgid "default"
+msgstr "əsas"
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which filesystem do you want?"
-msgstr "Hansı dili istəyirsiniz?"
+msgid "Indonesia"
+msgstr "Ä°ndoneziya"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "France [SECAM]"
+msgstr "Fransızca"
+
+#: ../../any.pm:1
#, c-format
-msgid "Change partition type"
-msgstr "Bölmə növĂŒnĂŒ DəyiƟdir"
+msgid "restrict"
+msgstr "məhdudlaƟdır"
-#: ../../diskdrake/interactive.pm:1
+#: ../../pkgs.pm:1
+#, c-format
+msgid "must have"
+msgstr "alınmalı"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
msgstr ""
-"%s bölməsinin növĂŒnĂŒ dəyiƟdirdikdən sonra, bu bölmədəki bĂŒtĂŒn mə'lumatlar "
-"silinəcəkdir"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Senegal"
+msgstr "Seneqal"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Remove the loopback file?"
-msgstr "Loopback faylı Ɵəkilləndirilir: %s"
+msgid "Command line"
+msgstr "Sahə(domain) adı"
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Preference: "
-msgstr "XĂŒsusiyyətlər: "
+msgid "access to administrative files"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Start sector: "
-msgstr "BaƟlanÄŸÄ±Ă§ sektoru: "
+msgid ""
+"Error during sendmail.\n"
+" Your report mail was not sent.\n"
+" Please configure sendmail"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Create a new partition"
-msgstr "Yeni bölmə yarat"
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Use for loopback"
-msgstr "Loopback ĂŒĂ§ĂŒn istifadə et"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Modify RAID"
-msgstr "RAIDi dəyiƟdir"
+msgid "Montserrat"
+msgstr "Montserrat"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Remove from LVM"
-msgstr "LVMdən ayır"
+msgid "Automatic dependencies"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Remove from RAID"
-msgstr "RAIDdən ayır"
+msgid "Swap"
+msgstr "Swap"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Add to LVM"
-msgstr "LVMə əlavə et"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connecting to the Internet "
+msgstr "İnternetə bağlan"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Add to RAID"
-msgstr "RAIDə əlavə et"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore Other"
+msgstr "Fayldan geri çağır"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Format"
-msgstr "ƞəkilləndir"
+msgid "TV card"
+msgstr "TV kartı"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Detailed information"
-msgstr "Mə'lumatı göstər"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "SMB/Windows 95/98/NT"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Trying to rescue partition table"
-msgstr "Bölmə cədvəli qurtarılmağa cəhd edilir"
+msgid ", "
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
msgstr ""
-"Disket sĂŒrĂŒcĂŒyə bir disket yerləƟdirin\n"
-"Bu disketdəki bĂŒtĂŒn mə'lumatlar yox olacaqdır"
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Warning"
-msgstr "Xəbərdarlıq"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove selected host/network"
+msgstr "Növbəni sil"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
+msgstr ""
+"Posfix, elektronik məktubların bir kompĂŒterdən digərinə yollayan \n"
+"Elektronik Məktub Yollama Vasitəsidir."
+
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Select file"
-msgstr "Fayl seç"
+msgid "Disconnection from the Internet failed."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
msgstr ""
-"Yedək bölmə cədvəli eyni böyĂŒklĂŒyə sahib deyil\n"
-"Davam etmək istəyirsiniz?"
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Removable media automounting"
-msgstr "Taxılıb sökĂŒlə bilən avadanlıqların avtomatik bağlanması"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "Reload partition table"
-msgstr "Bölmə cədvəlini qurtar"
+msgid "Network Hotplugging"
+msgstr "ƞəbəkə quraƟdırılması"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Rescue partition table"
-msgstr "Bölmə cədvəlini qurtar"
+msgid "if set to yes, reports check result to tty."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Restore partition table"
-msgstr "Bölmə cədvəlini qurtar"
+msgid "Restore From CD"
+msgstr "Disketdən geri çağır"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Save partition table"
-msgstr "Bölmə cədvəlini yaz"
+msgid ""
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
+msgstr ""
+"KompĂŒterınızi Ä°nternet bağlantısını bölĂŒĆŸdĂŒrmək ĂŒĂ§ĂŒn quraƟdırırsınız.\n"
+"Bu seçənəklə yerli Ɵəbəkənizdəki baƟqa kompĂŒterlər sizin Ä°nternet "
+"bağlantınızdan faydalana biləcəklər.\n"
+"\n"
+"Xəbədarlıq: Yerli ƞəbəkə (LAN) qurmaq ĂŒĂ§ĂŒn uyğun ƞəbəkə Adapterinə "
+"ehtiyacınız var."
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr "Artıq bölmə yaratmaq ĂŒĂ§ĂŒn, bir bölməni silib məntiqi bölmə yaradın"
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr "Ä°nternetə bağlanmaq ĂŒĂ§ĂŒn Ɵəbəkə adapteri seçin."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "I can't add any more partition"
-msgstr "Artıq bölmə əlavə edilə bilməz"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "All primary partitions are used"
-msgstr "BĂŒtĂŒn birinci bölmələr istifadədədir"
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Hard drive information"
-msgstr "Sabit disk seçkisi"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Internet Connection Sharing is now disabled."
+msgstr "Ä°nternet Bağlantısı BölĂŒĆŸdĂŒrĂŒlməsi indi bağlandı"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Auto allocate"
-msgstr "Avtomatik ayır"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Clear all"
-msgstr "Hamısını təmizlə"
+msgid "Latin American"
+msgstr "Latın Amerika dili"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Qurğuları sınamaq istəyirsiniz?"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Bölmə cədvəlini qeyd etmədən çıxırsınız?"
+msgid "Japanese text printing mode"
+msgstr "ƞəbəkəni qur"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Quit without saving"
-msgstr "Qeyd etmədən Çıx"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Old device file"
+msgstr "Fayl seç"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Continue anyway?"
-msgstr "Davam edilsin?"
+msgid "Info: "
+msgstr "Mə'lumat: "
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Toggle to expert mode"
-msgstr "Usta moduna keç"
+#: ../../interactive/stdio.pm:1
+#, fuzzy, c-format
+msgid "Button `%s': %s"
+msgstr "Seçənəklər: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Toggle to normal mode"
-msgstr "Normal moda keç"
+msgid "Please wait"
+msgstr "XahiƟ edirik gözləyin"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Undo"
-msgstr "Geri al"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Exit"
-msgstr "Ext2"
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Choose a partition"
-msgstr "Monitorunuzu seçin"
+msgid "None"
+msgstr "Qurtardı"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Choose another partition"
-msgstr "Yeni bölmə yarat"
+msgid "The entered IP is not correct.\n"
+msgstr "Doğrudur?"
-#: ../../diskdrake/removable.pm:1
-#, fuzzy, c-format
-msgid "Change type"
-msgstr "Bölmə növĂŒnĂŒ DəyiƟdir"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Ethernet Card"
+msgstr "Eternet Kartı"
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Search servers"
-msgstr "DNS verici"
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
+#, c-format
+msgid "Info"
+msgstr "Mə'lumat"
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Domain"
-msgstr "NIS sahəsi"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#, c-format
+msgid "Install"
+msgstr "Qurulum"
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Username"
-msgstr "Ä°stifadəçi adı"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
msgid ""
-"Please enter your username, password and domain name to access this host."
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
msgstr ""
+"SĂŒrĂŒcĂŒdəki bĂŒtĂŒn bilgiləri və bölmələri silmək ĂŒĂ§ĂŒn\n"
+"\"Oldu\" dĂŒyməsinə basın. Diqqətli olun,\"Oldu\" dĂŒyməsinə basdıqdan sonra\n"
+"Windows bilgiləri də daxil olmaq ĂŒzərəbĂŒtĂŒn bölmə mə'lumatı geri dönməyəcək "
+"Ɵəkildə silinəcək.\n"
+"\n"
+"\n"
+"Bölmədəki mə'lumatları qoruyaraq \"Ləğv et\" dĂŒyməsinə\n"
+"əməliyyatı ləğv edə bilərsiniz."
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Domain Authentication Required"
-msgstr "Tanıtma"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Another one"
-msgstr "Ä°nternet"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Which username"
-msgstr "Ä°stifadəçi adı"
+#: ../../steps.pm:1
+#, c-format
+msgid "Exit install"
+msgstr "Qurulumdan çıx"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Can't login using username %s (bad password?)"
+msgid ""
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
msgstr ""
+"Hər Ɵey quruldu.\n"
+"Ä°ndi isə Ä°nternet bağlantınızı yerli Ɵəbəkədəkı baƟqa kompĂŒterlər ilə "
+"bölĂŒĆŸdĂŒrə bilərsiniz, bunun ĂŒĂ§ĂŒn isə avtomatik Ɵəbəkə quraƟdırılması (DHCP) "
+"iƟlədilir."
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "cpu # "
-msgstr ""
+msgid "Remote CUPS server"
+msgstr "Uzaq CUPS vericisi"
-#: ../../harddrake/data.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "SMBus controllers"
-msgstr ""
+msgid "Sun - Mouse"
+msgstr "Sun - Siçan"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "USB controllers"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
msgstr ""
+"Sistemnizdə bir dənə qurulmuƟ Ɵəbəkə adapteri var:\n"
+"\n"
+"%s\n"
+"\n"
+"Yerli ƞəbəkə adapterinizi qurmaq ĂŒzərəyəm?"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1
+#, fuzzy, c-format
+msgid "Minimal install"
+msgstr "Qurulumdan çıx"
+
+#: ../../lang.pm:1
#, c-format
-msgid "SCSI controllers"
-msgstr ""
+msgid "Ethiopia"
+msgstr "Efiopiya"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Firewire controllers"
+msgid "Devanagari"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "(E)IDE/ATA controllers"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Joystick"
-msgstr ""
+msgid "Total size: %d / %d MB"
+msgstr "Ümumi böyĂŒklĂŒk: %d / %d Mb"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Scanner"
-msgstr "Ekran kartınızı seçin"
+msgid "disabled"
+msgstr "passivləƟdir"
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Unknown/Others"
-msgstr "Ümumi"
+msgid "Search for new scanners"
+msgstr "Yerli Çap Edici"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Bridges and system controllers"
-msgstr ""
-
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Modem"
-msgstr "Siçan"
+msgid "Disabling servers..."
+msgstr "Vericilər bağlanır..."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Ethernetcard"
-msgstr "Eternet Kartı"
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr "XahiƟ edirik qurmaq istədiyiniz paketləri seçin."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Processors"
-msgstr ""
+msgid "Installation of %s failed. The following error occured:"
+msgstr "%s qurulumu iflas etdi. Olan xəta:"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Webcam"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../install_any.pm:1
#, fuzzy, c-format
-msgid "Soundcard"
-msgstr "Səs kartı"
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
+msgstr ""
+"bu vericiləri seçdiniz: %s\n"
+"\n"
+"\n"
+"bu vericilər əsasən fəallaƟdırılır. Onların heç bir təhlĂŒkəsizlik\n"
+"problemləri yoxdur, amma bə'zi xətalar tapıla bilər. Belə olsa, mĂŒmĂŒkĂŒn olan "
+"ən yaxın zamanda gĂŒncəlləməlisiniz.\n"
+"\n"
+"\n"
+"Bu vericiləri qurmaq istəyirsiniz?\n"
-#: ../../harddrake/data.pm:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Other MultiMedia devices"
-msgstr "Digər"
+msgid "Network printer (TCP/Socket)"
+msgstr "ƞəbəkə Çap Edicisi (soket) "
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Tvcard"
-msgstr "TV kartı"
+msgid "Backup User files..."
+msgstr "Xətalı yedəkləmə faylı"
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Videocard"
-msgstr "Ekran modu"
+#: ../../steps.pm:1
+#, c-format
+msgid "Install system"
+msgstr "Sistemi qur"
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Tape"
-msgstr "Növ"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "First DNS Server (optional)"
+msgstr "Birinci DNS Vericisi (arzuya görə)"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "DVD-ROM"
+msgid ""
+"Alternatively, you can specify a device name/file name in the input line"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "dhcpd Config..."
+msgstr "QuraƟdırılır..."
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid "CD/DVD burners"
-msgstr ""
+msgid "The setup has already been done, but it's currently disabled."
+msgstr "QuraƟdırma artıq qurtarıbdır, amma fəaliyyəti dayandırılıb."
-#: ../../harddrake/data.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "CDROM"
-msgstr ""
+msgid "LILO/grub Installation"
+msgstr "LILO/grup Qurulumu"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Israeli"
+msgstr "Ä°srail"
+
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Disk"
-msgstr "Danimarka dili"
+msgid "load setting"
+msgstr "ƞəkilləndirilir"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "ƞəbəkə dayandırılır"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Zip"
+msgid "Floppy can be removed now"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Floppy"
-msgstr "Disketə qeyd et"
+msgid "Truly minimal install"
+msgstr "Qurulumdan çıx"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Let me pick any driver"
-msgstr ""
+msgid "Denmark"
+msgstr "Danimarka"
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving partition..."
+msgstr "Bölmə daĆŸÄ±nır..."
+
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Driver:"
-msgstr "SĂŒrĂŒcĂŒ"
+msgid "(This) DHCP Server IP"
+msgstr "CUPS verici IP"
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
+msgid "Test of the configuration"
+msgstr "Qurğuların sınağı"
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing %s ..."
+msgstr "%s paketi qurulur"
-#: ../../harddrake/sound.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sound trouble shooting"
+msgid "Choose your filesystem encryption key"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgid ""
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unkown driver"
-msgstr ""
+msgid "Andorra"
+msgstr "Andorra"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr ""
+msgid "Sierra Leone"
+msgstr "Siera Lione"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No known driver"
-msgstr ""
+msgid "Botswana"
+msgstr "Botsvana"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "(default value: %s)"
+msgstr " (Əsas)"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
+msgid "Alternative test page (Letter)"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "No open source driver"
+msgid ""
+"DHCP Server Configuration.\n"
+"\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
+"\n"
msgstr ""
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid "Choose an X server"
+msgstr "Bir X vericisi seçin"
+
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "LĂŒtdən Gözləyin... Qurğular əlavə edilir"
+msgid "Swap partition size in MB: "
+msgstr "Swap sahəsi böyĂŒklĂŒyĂŒ (Mb): "
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
+"Other (not drakbackup)\n"
+"keys in place already"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "No changes to backup!"
+msgstr "Xətalı yedəkləmə faylı"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Trouble shooting"
+msgid "Formatted\n"
+msgstr "ƞəkilləndirilmiƟ\n"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Type of install"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "SMB/Windows 95/98/NT"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
+"- Daemon (%s) include:\n"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
+msgid "%d comma separated numbers"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
msgstr ""
+"rusers protokolu bir Ɵəbəkədəkı istifadəçilərin o Ɵəbəkədəkı kompĂŒterlərdə\n"
+"iƟləyən istifadəçiləri görməsinə imkan verər."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Sound configuration"
-msgstr "Yerli ƞəbəkə QuraƟdırılması"
+msgid "Automatic Steps Configuration"
+msgstr "Qurulum Tərzi QuraƟdırılması"
-#: ../../harddrake/sound.pm:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No alternative driver"
-msgstr ""
+msgid "Barbados"
+msgstr "Barbados"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please select data to backup..."
+msgstr "XahiƟ edirik istifadə ĂŒĂ§ĂŒn bir dil seçin."
+
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "enable radio support"
+msgid ""
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Radio support:"
+msgid "received"
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "/File/_New"
+msgstr "/Fayl/_Təze"
+
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "PLL setting:"
-msgstr "ƞəkilləndirilir"
+msgid "The DNS Server IP"
+msgstr "CUPS verici IP"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "number of capture buffers for mmap'ed capture"
+msgid "IP Range End:"
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Number of capture buffers:"
+msgid "High"
+msgstr "YĂŒksək"
+
+#: ../../any.pm:1
+#, c-format
+msgid "NoVideo"
+msgstr "NoVÄ°deo"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "this field describes the device"
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr ""
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Tuner type:"
-msgstr "Bölmə növĂŒnĂŒ DəyiƟdir"
+msgid "Local Printers"
+msgstr "Yerli Çap Edici"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "Card model:"
-msgstr "Kart mem (DMA)"
+msgid "Installation image directory"
+msgstr "Yerli ƞəbəkə QuraƟdırılması"
-#: ../../harddrake/v4l.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
+msgid "NIS Server"
+msgstr "NIS Verici"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Unknown|Generic"
-msgstr "Ümumi"
+msgid "Port: %s"
+msgstr "Qapı"
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr ""
+msgid "Spain"
+msgstr "Ä°spaniya"
-#: ../../harddrake/v4l.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr ""
+msgid "This user name has already been added"
+msgstr "Bu istifadəçi adı artıq vardır"
-#: ../../harddrake/v4l.pm:1
+#: ../../interactive.pm:1
#, fuzzy, c-format
-msgid "Auto-detect"
-msgstr "Avtomatik təsbit iƟlət"
+msgid "Choose a file"
+msgstr "Monitorunuzu seçin"
-#: ../../interactive/newt.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Apply"
+msgstr "Əlavə Et"
+
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Do"
-msgstr "Qurtardı"
+msgid "Auto-detect available ports"
+msgstr "Avtomatik təsbit iƟlət"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Seçkiniz? (əsas %s) "
+msgid "Internet Connection Sharing currently disabled"
+msgstr "Ä°nternet Bağlantısı BölĂŒĆŸdĂŒrĂŒlməsi passivləƟdirildi"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Xətalı tərcih, təkrar sınayın\n"
+msgid "San Marino"
+msgstr "San Marino"
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "Re-submit"
-msgstr ""
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "Belgium"
+msgstr "Belçika dili"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
+msgid "Kuwait"
+msgstr "KĂŒveyt"
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
+msgid "Choose the window manager to run:"
+msgstr "İstifadə etmək istədiyiniz pəncərə idarəçisini seçin:"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "=> There are many things to choose from (%s).\n"
+msgid "sub generation of the cpu"
msgstr ""
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Seçkiniz? (əsas %s) "
+msgid "First Time Wizard"
+msgstr "Ä°lk Dəfə Sehirbazına XoƟ Gəldiniz"
-#: ../../interactive/stdio.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid " enter `void' for void entry"
+msgid ""
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
msgstr ""
+"Bir xəta oldu, fəqət necə dĂŒzəldiləcəyini bilmirəm.\n"
+"Davam edin, riski sizə aitdir!"
-#: ../../interactive/stdio.pm:1
-#, fuzzy, c-format
-msgid "Do you want to click on this button?"
-msgstr "aboot istifadə etmək istəyirsiniz?"
-
-#: ../../interactive/stdio.pm:1
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Seçənəklər: %s"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "please wait, parsing file: %s"
+msgstr "xahiƟ edirik, gözləyin, fayl daranır: %s"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Seçkiniz? (əsas %s) "
+msgid "Taiwan"
+msgstr "Tayland"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
+msgid "Pakistan"
+msgstr "Pakistan"
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
msgstr ""
-"%s modulunun yĂŒklənməsi iflas etdi.\n"
-"Yenidən baƟqa bir parametr ilə sınamaq istəyirsiniz?"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Permissions"
+msgstr "BuraxılÄ±ĆŸ: %s\n"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Specify options"
-msgstr "Seçənəkləri göstər"
+msgid "Provider name (ex provider.net)"
+msgstr "İnternet xidmət vericinizin adı (məsələn azeronline.com)"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Autoprobe"
-msgstr "Avtomatik yoxla"
+msgid "Version: %s\n"
+msgstr "BuraxılÄ±ĆŸ: %s\n"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
-"Bəzi hallarda, %s sĂŒrĂŒcĂŒ dĂŒzgĂŒn iƟləməsi ĂŒĂ§ĂŒn əlavə mə'lumat istəyə bilər.\n"
-"SĂŒrĂŒcĂŒler ĂŒĂ§ĂŒn əlavə bir xĂŒsusiyyət göstərmək mi istəyərsiniz, yoxsa\n"
-"sĂŒrĂŒcĂŒlərin lazımi mə'lumatlar ĂŒĂ§ĂŒn avadalığı tanımasını mı istəyərsiniz? \n"
-"Bə'zən tanımlama kompĂŒterinizi dondura bilər amma donduğu ĂŒĂ§ĂŒn\n"
-"kompĂŒterinizə heç bir Ɵey olmaz."
+"Sizin sisteminizin qaynaqları çatÄ±ĆŸmır. Qurulum ərzində problem yaƟaya "
+"bilərsiniz\n"
+"Bu baƟ verərsə mətn aracılığı ilə qurulumu sınamalısınız. Bunun ĂŒĂ§ĂŒn "
+"dəCDROMdan baƟlatdığınız zaman,\n"
+" 'F1'ə basın və 'text' yazaraq enter'ə basın."
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Hansı %s sĂŒrĂŒcĂŒsĂŒ sınansın?"
+msgid "Use the Windows partition for loopback"
+msgstr "Loopback ĂŒĂ§ĂŒn Windows bölməsini iƟlət"
-#: ../../modules/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Module options:"
-msgstr "Modul seçənəkləri:"
+msgid "Armenian (typewriter)"
+msgstr "Ermenicə (yazı maĆŸÄ±nı)"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Ä°stəsəniz indi %s modulunun parametrlərini göstərə bilərsiniz.\n"
-"Parametrlər``ad=qiymət ad2=qiymət2...'' Ɵəklində olmalıdır.\n"
-"Məsələn ``io=0x300 irq=7''"
+msgid "Connection type: "
+msgstr "Bağlantı növĂŒ:"
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Graphical interface"
+msgstr "X ilə AçılÄ±ĆŸ"
-#: ../../modules/interactive.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "3D avadanlıq sĂŒr'ətləndirməsi ilə XFree %s"
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "%s kartı (%s) ĂŒĂ§ĂŒn sĂŒrĂŒcĂŒ yĂŒklənir"
+msgid "India"
+msgstr "Hindistan"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "See hardware info"
-msgstr "Avadanlıq mə'lumatına bax"
+msgid "Chad"
+msgstr "Çad"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Heç %s ara ĂŒzĂŒ var?"
+msgid "Slovakia"
+msgstr "Slovakiya"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you have another one?"
-msgstr "BaƟqa var?"
+msgid "Singapore"
+msgstr "Sinqapur"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s %s ara ĂŒzĂŒ tapıldı"
+msgid "Cambodia"
+msgstr "Kambodiya"
-#: ../../modules/interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr ""
-
-#: ../../modules/parameters.pm:1
-#, fuzzy, c-format
-msgid "comma separated strings"
-msgstr "Bölmə Ɵəkilləndirilməsi"
+msgid "Monitor HorizSync: %s\n"
+msgstr "Monitorun ƞaquli Daraması: %s\n"
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "comma separated numbers"
+msgid "Path"
msgstr ""
-#: ../../modules/parameters.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "%d comma separated strings"
+msgid ""
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
msgstr ""
-#: ../../modules/parameters.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "%d comma separated numbers"
+msgid ""
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
msgstr ""
-#: ../../modules/parameters.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "a number"
-msgstr "Telefon nömrəsi"
+msgid ""
+"Printer %s\n"
+"What do you want to modify on this printer?"
+msgstr "Qurğuları sınamaq istəyirsiniz?"
-#: ../../network/adsl.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Add host"
+msgstr "İstifadəçini əlavə et"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
+"\n"
+"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
-#: ../../network/adsl.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
+"\n"
+"\"Custom\" permit a per-user granularity.\n"
msgstr ""
-"ADSL ilə internetə bağlanmanın ən yaxĆŸÄ± yolu pppoe'dur.\n"
-"Bəzi bağlantılar pptp istifadə edir, çox azı isə dhcp iƟlədir.\n"
-"Bilmirsiniz isə 'pppop istifadə et'i seçin"
-
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
-#, c-format
-msgid "Connect to the Internet"
-msgstr "İnternetə bağlan"
-#: ../../network/adsl.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Sagem (using pppoa) usb"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
msgstr ""
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Alcatel speedtouch usb"
+msgid "China (broadcast)"
msgstr ""
-#: ../../network/adsl.pm:1
-#, c-format
-msgid "use dhcp"
-msgstr "dhcp istifadə et"
-
-#: ../../network/adsl.pm:1
-#, c-format
-msgid "use pptp"
-msgstr "pptpe istifadə et"
-
-#: ../../network/adsl.pm:1
-#, c-format
-msgid "use pppoe"
-msgstr "pppoe istifadə et"
-
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Other ports"
-msgstr "Qapıları sına"
+msgid "Use quota for backup files."
+msgstr "Xətalı yedəkləmə faylı"
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "Everything (no firewall)"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Configuring printer \"%s\"..."
+msgstr "Çap Edicini Qur"
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
-msgstr ""
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Internet connection"
+msgstr "Ä°nternet Bağlantısı BölĂŒĆŸdĂŒrĂŒlməsi"
-#: ../../network/drakfirewall.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
msgstr ""
+"%s modulunun yĂŒklənməsi iflas etdi.\n"
+"Yenidən baƟqa bir parametr ilə sınamaq istəyirsiniz?"
-#: ../../network/drakfirewall.pm:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
+msgid "Welcome to the Open Source world."
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
+msgid "Bosnia and Herzegovina"
+msgstr "Bosniya və Herzoqovina"
-#: ../../network/drakfirewall.pm:1
+#: ../../fsedit.pm:1
#, fuzzy, c-format
msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
msgstr ""
-"tinyfirewall configurator\n"
-"\n"
-"Bu, Linuks Mandrake sisteminiz ĂŒĂ§ĂŒn Ɵəxsi bir firewall quraƟdıracaqdır.\n"
-"Daha gĂŒclĂŒ və e'tibarlı sistem ĂŒĂ§ĂŒn xahiƟ edirik xĂŒsusi MandrakeSecurity "
-"Firewall\n"
-"buraxılÄ±ĆŸÄ±nı tədqiq edin."
+"Bu bağlama nöqtəsi ĂŒĂ§ĂŒn həqiqi bir fayl sisteminə (ext2, reisrfs)\n"
+"ehtiyac vardır.\n"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "No network card"
-msgstr "Ɵəbəkə kartı tapılmadı"
+msgid "You must enter a host name or an IP address.\n"
+msgstr "XahiƟ edirik siçanınızı seçin"
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid "POP and IMAP Server"
-msgstr "Verici"
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#, c-format
+msgid "Netherlands"
+msgstr "Hollandiya"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Mail Server"
-msgstr "Databeyz"
+msgid "Sending files by FTP"
+msgstr "Fayla qeyd et"
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid "Domain Name Server"
-msgstr "Sahə(domain) adı"
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "Internal ISDN card"
+msgstr "Daxili ISDN kart"
-#: ../../network/drakfirewall.pm:1
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid ""
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
+msgstr ""
+
+#: ../../network/modem.pm:1
#, fuzzy, c-format
-msgid "Web Server"
-msgstr "Verici"
+msgid "Title"
+msgstr "Cədvəl"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Zeroconf host name must not contain a ."
+msgid "Install & convert Fonts"
msgstr ""
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Host name"
-msgstr "Ev sahibi adı"
+msgid "WARNING"
+msgstr ""
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Zeroconf Host name"
-msgstr "Ev sahibi adı"
+msgid "Installing bootloader"
+msgstr "Sistem yĂŒkləyicini qur"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
-msgstr ""
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "replay"
+msgstr "Təkrarla"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Configuring network"
-msgstr "ƞəbəkə Qurğuları"
+msgid "detected %s"
+msgstr "%s tapıldı"
-#: ../../network/ethernet.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
-msgstr "Ä°nternetə bağlanmaq ĂŒĂ§ĂŒn Ɵəbəkə adapteri seçin."
+msgid "Virgin Islands (U.S.)"
+msgstr "Virgin Adaları (ABƞ)"
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Choose the network interface"
-msgstr "ƞəbəkə ara ĂŒzĂŒnĂŒ seçin"
+msgid "Bad backup file"
+msgstr "Xətalı yedəkləmə faylı"
-#: ../../network/ethernet.pm:1
-#, c-format
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"Sisteminizdə heç bir eternet Ɵəbəkə adapteri tapıla bilmədi.\n"
-"Bu bağlantı Ɵəklini qura bilmərəm."
+"Ä°nternet Bağlantısı BölĂŒĆŸdĂŒrĂŒlməsi qurulması artıq bitdi.\n"
+"Və artıq passivləƟdirilmiƟdir.\n"
+"\n"
+"Nə etmək istəyirsiniz?"
-#: ../../network/ethernet.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
+msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""
-"Hansı dhcp alıcısını istifadə edəcəksiniz?\n"
-"Əsası dhcp-client dir"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Heç bir ISDN PCI kart tapılmaı. Sonrakı ekrandakılardan seçin."
+msgid "Pipe into command"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
msgstr ""
-"ISDN PCI kart tapdım, amma növĂŒnĂŒ bilmirəm. XahiƟ edirik sonrakı ekrandakı "
-"kartlardan birini seçin."
-
-#: ../../network/isdn.pm:1
-#, fuzzy, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Hansısı sizin ISDN kartınızdır?"
+"Sisteminizdaki bə'zi avadanlıqlar iƟləməsi ĂŒĂ§ĂŒn dĂŒzgĂŒn sĂŒrĂŒcĂŒlərə ehtiyac "
+"duyar.\n"
+"Bunun haqqında %s də/a lazımi malumatları tapa bilərsiniz"
-#: ../../network/isdn.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "ISDN Configuration"
-msgstr "ISDN quraƟdırılması"
+msgid "Detecting devices..."
+msgstr "Avadanlıqlar tanınır..."
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Abort"
-msgstr "Dayandır"
+msgid "Click here to launch the wizard ->"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Continue"
-msgstr "Davam et"
+msgid "Haiti"
+msgstr "Haiti"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
+"Description of the fields:\n"
"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
msgstr ""
-"\n"
-"ISA kartınız var isə sonrakı ekrandakı qiymətlər doğru olmalıdır.\n"
-"\n"
-"PCMCIA kartınız var isə kartınızın irq və ya io'sunu bilməlisiniz.\n"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "I don't know"
-msgstr "Bilmirəm"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "the name of the CPU"
+msgstr ""
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "What kind of card do you have?"
-msgstr "Hansı növ kartınız var?"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Refreshing printer data..."
+msgstr "CUPS sĂŒrĂŒcĂŒ datası oxunur..."
-#: ../../network/isdn.pm:1
+#: ../../install2.pm:1
#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
+msgid "You must also format %s"
msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Hansı protokolu istifadə etmək istəyirsiniz?"
+msgid "Be careful: this operation is dangerous."
+msgstr "Diqqətlı olun: bu əməliyyat təhlĂŒkəlidir."
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Protocol for the rest of the world"
-msgstr "BĂŒtĂŒn dĂŒnya"
+msgid "Insert a floppy containing package selection"
+msgstr "%s sĂŒrĂŒcĂŒsĂŒnə bir disket taxın"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/dav.pm:1
#, fuzzy, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-"BĂŒtĂŒn dĂŒnya \n"
-" D-Channel'lə xaric (kiralıq xətlər)"
+msgid "Server: "
+msgstr "Verici"
-#: ../../network/isdn.pm:1
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "European protocol"
-msgstr "AçılÄ±ĆŸ Protokolu"
+msgid "Security Alerts:"
+msgstr "TəhlĂŒkəsizlik səviyyəsinin quraƟdırılması"
-#: ../../network/isdn.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, fuzzy, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Avropa (EDSS1)"
+msgid "Sweden"
+msgstr "İsveçcə"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
+msgid "Use Expect for SSH"
msgstr ""
-"İnternet xidmət vericinizi seçin.\n"
-"Siyahıda deyilsə Siyahıda deyil'i seçin."
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "External ISDN modem"
-msgstr "Xarici ISDN kart"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Internal ISDN card"
-msgstr "Daxili ISDN kart"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "ISDN bağlantınızın növĂŒ nədir?"
+msgid "Poland"
+msgstr "PolƟa"
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Network Configuration Wizard"
-msgstr "ƞəbəkə QuraƟdırılması Sehirbazı"
+msgid "Importance: %s\n"
+msgstr "Əhəmiyyət: %s\n"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "Oddan divar (Firewall) quruluƟu tapıldı!"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr "XahiƟ edirik qurmaq istədiyiniz paketləri seçin."
-#: ../../network/isdn.pm:1
+#: ../../network/drakfirewall.pm:1
#, fuzzy, c-format
-msgid "New configuration (isdn-light)"
-msgstr "Oddan divar (Firewall) quruluƟu tapıldı!"
+msgid "Other ports"
+msgstr "Qapıları sına"
-#: ../../network/isdn.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
+msgid "number of capture buffers for mmap'ed capture"
msgstr ""
-#: ../../network/modem.pm:1
-#, fuzzy, c-format
-msgid "Do nothing"
-msgstr "amma oxƟamır"
-
-#: ../../network/modem.pm:1
-#, fuzzy, c-format
-msgid "Install rpm"
-msgstr "Qurulum"
-
-#: ../../network/modem.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
+msgid "SMBus controllers"
msgstr ""
-#: ../../network/modem.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Title"
-msgstr "Cədvəl"
+msgid "Connection timeout (in sec)"
+msgstr "Bağlantı növĂŒ:"
-#: ../../network/modem.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
-msgstr ""
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Ä°kinci DNS Vericisi (arzuya görə)"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Birinci DNS Vericisi (arzuya görə)"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Domain name"
-msgstr "Sahə(domain) adı"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "CHAP"
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Script-based"
-msgstr "Skript əsaslı"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Terminal-based"
-msgstr "Terminal əsaslı"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid "Croatian"
+msgstr "Xırvatca"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Login ID"
-msgstr "GiriƟ adı"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Use existing partition"
+msgstr "Var olan bölmələri iƟlədimmi"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Phone number"
-msgstr "Telefon nömrəsi"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Unable to contact mirror %s"
+msgstr "Fork edilə bilmir: %s"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Connection name"
-msgstr "Bağlantı adı"
+msgid "/Help/_About..."
+msgstr "/Kömək/_Haqqında..."
-#: ../../network/modem.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Dialup options"
-msgstr "Çevirməli Ɵəbəkə seçənəkləri"
+msgid "Remove user directories before restore."
+msgstr ""
-#: ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Modeminizin hansı serial qapıya bağlı olduğunu seçiniz"
+msgid ""
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
+msgstr ""
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "Network Configuration"
-msgstr "ƞəbəkə quraƟdırılması"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "CUPS printer configuration"
+msgstr "İnternet qurğuları"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
+msgid "could not find any font in your mounted partitions"
msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
+msgid "F00f bug"
msgstr ""
-"Bu edildikdən sonra Xdən çıxmağınızı tövsiyyə edirik, yoxsa\n"
-"verici adı xəsarətləri meydana gələ bilər."
-#: ../../network/netconnect.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Təbrik edirik, internet və Ɵəbəkə quraƟdırılması qurtardı.\n"
-"\n"
-"Qurğular indi sisteminizə əlavə ediləcək.\n"
+msgid "XFree %s"
+msgstr "XFree %s"
-#: ../../network/netconnect.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
msgstr ""
-"ƞəbəkənin yenidən baƟladılması sırasında xəta oldu: \n"
-"\n"
-"%s"
+"Hansı dhcp alıcısını istifadə edəcəksiniz?\n"
+"Əsası dhcp-client dir"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr ""
-"Bu paket yenilənməlidir\n"
-"Sistemdən çıxarmaq mövzusunda ciddisiniz?"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Network configuration"
-msgstr "ƞəbəkə quraƟdırılması"
+msgid "Domain Name:"
+msgstr "Sahə(domain) adı"
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Bağlantınızı açılÄ±ĆŸda baƟlatmaq istəyirsiniz?"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "On Floppy"
+msgstr "Disketə qeyd et"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Internet connection"
-msgstr "Ä°nternet Bağlantısı BölĂŒĆŸdĂŒrĂŒlməsi"
+msgid "Restore"
+msgstr "Fayldan geri çağır"
-#: ../../network/netconnect.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
msgstr ""
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Choose the connection you want to configure"
-msgstr "İstifadə edəcəyiniz vasitəni seçin"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Looking for available packages..."
+msgstr "Mövcud olan paketlər axtarılır."
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "ethernet card(s) detected"
-msgstr "eternet kart tapıldı"
+msgid "Init Message"
+msgstr "İnit İsmarıcı"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LAN connection"
-msgstr "Yerli ƞəbəkə quraƟdırılması"
+msgid "Rescue partition table"
+msgstr "Bölmə cədvəlini qurtar"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "cable connection detected"
-msgstr "Kabel bağlantısı"
+msgid "Connection complete."
+msgstr "Bağlantı növĂŒ:"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Cable connection"
-msgstr "Kabel bağlantısı"
+msgid "Cyprus"
+msgstr "Kipr (Yunan və TĂŒrk) "
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "detected"
-msgstr "%s tapıldı"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Remove from RAID"
+msgstr "RAIDdən ayır"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "ADSL connection"
-msgstr "Yerli ƞəbəkə quraƟdırılması"
+msgid "This encryption key is too simple (must be at least %d characters long)"
+msgstr "Bu parol çox sadədir (en az %d xarakter boyunda olmalıdır)"
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "detected %s"
-msgstr "%s tapıldı"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Configuration Wizards"
+msgstr "ƞəbəkə QuraƟdırılması Sehirbazı"
#: ../../network/netconnect.pm:1
#, c-format
msgid "ISDN connection"
msgstr "ISDN Bağlantısı"
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Winmodem connection"
-msgstr "Normal modem təsbiti"
-
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "detected on port %s"
-msgstr "%s qapısında tapıldı"
+msgid "primary"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Normal modem connection"
-msgstr "Normal modem təsbiti"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr ""
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Detecting devices..."
-msgstr "Avadanlıqlar tanınır..."
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
+"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
+"\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
+msgstr ""
+"Ä°ndi, açılÄ±ĆŸda avtomatik olaraq baƟlamasını istədiyiniz xidmətləri \n"
+"seçə bilərsiniz. Siçan bir maddənin ĂŒzərina gəldiyində o xidmətin rolunu "
+"açıqlayan\n"
+"kiçik bir baloncuq ortaya çıxacaqdır.\n"
+"\n"
+"Əgər kompĂŒterinizi bir verici olaraq istifadə edəcəksəniz bu addımda tam bir "
+"diqqət ayırmalısınız:\n"
+"mĂŒhtəməldir ki lazımi heç bir xidməti baƟlatmaq istəməzsiniz."
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Expert Mode"
-msgstr "Usta Modu"
+msgid "Skip"
+msgstr "Nəzərə Alma"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use auto detection"
-msgstr "Avtomatik təsbit iƟlət"
+msgid "Niue"
+msgstr "Niu"
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Choose the profile to configure"
-msgstr "Qurulacaq profili seçin"
+msgid ""
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
+msgstr ""
+"AçılÄ±ĆŸ sırasında baƟlamaq ĂŒĂ§ĂŒn qurulmuƟ bĂŒtĂŒn Ɵəbəkə axtar ĂŒzlərini "
+"fəallaƟdırır ya da qapatır."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
msgstr ""
-"ƞəbəkə QuraƟdırma Sehirbazına Xoç Gəldiniz\n"
-"\n"
-"Ä°nternet/ƞəbəkə qurğularınızı edəcəyik.\n"
-"Avtomatik təsbit istəmirsiniz isə iƟarəti qaldırın.\n"
-#: ../../network/netconnect.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
+msgid "important"
+msgstr "vacib"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Total Progress"
msgstr ""
-"ƞəbəkədən quraƟdırması apardığınız ĂŒĂ§ĂŒn Ɵəbəkəniz artıq qurulmuƟ olmalıdır.\n"
-"ƞəbəkə/Ä°nternet bağlantınızı yenidən quraƟdırmaq ĂŒĂ§ĂŒn Oldu'ya yoxsa Ləğv "
-"et'ə basın.\n"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
"\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
"\n"
-"We are now going to configure the %s connection.\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
+msgstr ""
+"DrakX PCI SCSI adapterleri axtarmağa cəhd edəcək. Əgə DrakX SCSI\n"
+"taparsa və hansı sĂŒrĂŒcĂŒ iƟlədiləcəyini bilərsə, her Ɵey öz özĂŒnə\n"
+"qurulacaq.\n"
"\n"
"\n"
-"Press OK to continue."
-msgstr ""
+"Əgər sisteminizdə SCSI adapteri yoxsa, DrakXin tanımayacağı bir\n"
+"ISA SCSI və ya PCI SCSI adapteri var isə, sizə sisteminizdə SCSI\n"
+"adapteri olub olmadığı soruƟulacaq.\n"
+"Əgər SCSI adapteriniz yox isə, \"Yox\" tıqlayın. Əgər \"Var\"ı "
+"tıqlayarsanız.\n"
+"qarĆŸÄ±nıza sĂŒrĂŒcĂŒləin siyahısı çıxacaq, oradan sizə uyanını seçərsiniz.\n"
"\n"
-"Bağlantınızı kəsə bilərsiniz. Ya da bağlantını yenidən də quraƟdıra "
-"bilərsiniz."
-
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
"\n"
-"Bağlantınızı kəsə bilərsiniz. Ya da bağlantını yenidən də quraƟdıra "
-"bilərsiniz."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Internet connection & configuration"
-msgstr "Ä°nternet bağlantısı & quraƟdırılması"
+"Əgər əllə qurmağı səçərsəniz, o zaman DrakX sizə adapterin xĂŒsusiyyətlərini\n"
+"soruƟacaq. Ä°mkan verin ki, DrakX sərbəstcə özĂŒ xĂŒsusiyyətləri tapsın.\n"
+"Çoxunda bu iƟə yarayır.\n"
+"\n"
+"\n"
+"Əgər istəmirsəniz isə, o zaman adapter ĂŒĂ§ĂŒn xĂŒsusiyyətləri özĂŒnĂŒz\n"
+"göstərməlisiniz. Bunun ĂŒĂ§ĂŒn Ä°stifadəçinin Əl Kitabçasına\n"
+"(baƟlıq 3, \"Avadanlığınız ĂŒĂ§ĂŒn kollektiv mə'lumat) bölməsinə\n"
+"baxın. Ya da avadanlığınızın əl kitabçasından və ya\n"
+"veb səhifəsindən (Əgər internetə çıxÄ±ĆŸÄ±nız var isə)\n"
+"ya da Microsoft Windowsdan (Əgər sisteminizdə qurulu isə)\n"
+"mə'lumat alın."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Configure the connection"
-msgstr "ƞəbəkəni qur"
+msgid "Users"
+msgstr "Ä°stifadəçi adı"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Disconnect"
-msgstr "Bağlantını kəs"
+msgid "Aruba"
+msgstr "Aruba"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Connect"
-msgstr "Bağlan"
+msgid "Preparing bootloader..."
+msgstr "AçılÄ±ĆŸ yĂŒkləyici hazırlanır"
-#: ../../network/netconnect.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"\n"
-"You can reconfigure your connection."
+msgid "Gateway (e.g. %s)"
msgstr ""
-"\n"
-"Bağlantınızı yenidən quraƟdıra bilərsiniz."
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
+msgid "The passwords do not match"
+msgstr "Parollar uyğun gəlmir"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Examples for correct IPs:\n"
msgstr ""
-"\n"
-"Ä°stəsəniz Ä°nternetə bağlana bilərsiniz ya da yeniden quraƟdıra bilərsiniz."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "Hələ İnternetə bağlı deyilsiniz."
+msgid "Frequency (MHz)"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
msgstr ""
-"\n"
-"Bağlantınızı kəsə bilərsiniz. Ya da bağlantını yenidən də quraƟdıra "
-"bilərsiniz."
+"Bu saxlanmÄ±ĆŸ paketlər seçkisini iƟlətmək ĂŒĂ§ĂŒn qurulumu ``linux "
+"defcfg=floppy''ilə baƟladın."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You are currently connected to the Internet."
-msgstr "Artıq İnternetə bağlısınız."
+msgid "the number of the processor"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "Vəkil verici http://... Ɵəklində olmalıdır."
+msgid "Hardware clock set to GMT"
+msgstr "Avadanlıq saatınız GMT-yə göra quruludur mu?"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Give a file name"
+msgstr "Həqiqi adı"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Please choose the port that your printer is connected to."
+msgstr "Modeminizin hansı serial qapıya bağlı olduğunu seçiniz"
+
+#: ../../standalone/livedrake:1
#, c-format
-msgid "Proxy should be http://..."
-msgstr "Vəkil verici http://... Ɵəklində olmalıdır."
+msgid "Change Cd-Rom"
+msgstr "Cd-Romu dəyiƟdir"
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "FTP proxy"
-msgstr "FTP vəkil verici"
+msgid "Paraguay"
+msgstr "Paraqvay"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "HTTP proxy"
-msgstr "HTTP vəkil verici"
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Proxies configuration"
-msgstr "Vəkil vericilər quraƟdırılması"
+msgid "There's no known driver for your sound card (%s)"
+msgstr ""
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "IP ĂŒnvanı 1.2.3.4 Ɵəklində olmalıdır"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "force"
+msgstr "zorla"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "IP ĂŒnvanı 1.2.3.4 Ɵəklində olmalıdır"
+msgid "Exit"
+msgstr "Ext2"
-#: ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Gateway device"
-msgstr "Keçit avadanlığı"
+msgid ""
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Gateway (e.g. %s)"
+msgid ""
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
msgstr ""
+"Qurulu ara ĂŒzĂŒnĂŒz yoxdure.\n"
+"Əvvəlcə onları 'QuraƟdır'a basaraq qurun"
-#: ../../network/network.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "DNS server"
-msgstr "DNS verici"
+msgid "Estonian"
+msgstr "Estoniya dili"
-#: ../../network/network.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""
-"XahiƟ edirik kompĂŒterinizn adını girin.\n"
-"Məsələn``kompĂŒteradı.sahəadı.com''.\n"
-"Əgər Ɵəbəkə keçidi istifadə edirsinizsə bunun da IP nömrəsini girməlisiniz."
+"Apache bir World Wide Web vericisidir. HTML faylları və CGI verilməsi ĂŒĂ§ĂŒn "
+"istifadə edilir."
-#: ../../network/network.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Add/Del Clients"
+msgstr "DHCP Alıcısı"
+
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
+msgid "Choose the network interface"
+msgstr "ƞəbəkə ara ĂŒzĂŒnĂŒ seçin"
+
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Unknown Model"
msgstr ""
-#: ../../network/network.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
+msgid "CD/DVD burners"
msgstr ""
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP ĂŒnvanı 1.2.3.4 Ɵəklində olmalıdır"
+msgid ""
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"Ana açılma bölməsi\n"
+" (MS-DOS açılÄ±ĆŸÄ± ĂŒĂ§ĂŒn)\n"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Start at boot"
-msgstr "AçılÄ±ĆŸda baƟladılır"
+msgid "choose image"
+msgstr "Monitorunuzu seçin"
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Assign host name from DHCP address"
-msgstr "XahiƟ edirik siçanınızı seçin"
+#: ../../network/shorewall.pm:1
+#, c-format
+msgid "Firewalling configuration detected!"
+msgstr "Oddan divar (Firewall) quruluƟu tapıldı!"
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Network Hotplugging"
-msgstr "ƞəbəkə quraƟdırılması"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Connection name"
+msgstr "Bağlantı adı"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Track network card id (useful for laptops)"
+msgid ""
+"x coordinate of text box\n"
+"in number of characters"
msgstr ""
-#: ../../network/network.pm:1
+#: ../../install_steps_gtk.pm:1
#, fuzzy, c-format
-msgid "DHCP host name"
-msgstr "Ev sahibi adı"
+msgid "Updating package selection"
+msgstr "Paket seçkilərini saxla"
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Netmask"
-msgstr "Netmask"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "%s loopback avadanlığını haraya bağlamaq istəyirsiniz?"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "IP address"
-msgstr "IP ĂŒnvanı"
+msgid ""
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp)"
+msgid "the number of buttons the mouse has"
+msgstr "2 dĂŒyməli"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Automatic IP"
-msgstr "AvtomatlaƟdırılmÄ±ĆŸ IP"
+msgid ""
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid " (driver %s)"
-msgstr " (sĂŒrĂŒcĂŒ %s)"
+msgid "Replay"
+msgstr "Təkrarla"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup other files"
+msgstr "Xətalı yedəkləmə faylı"
+
+#: ../../install_steps.pm:1
#, c-format
-msgid "Configuring network device %s"
-msgstr "%s Ɵəbəkə avadanlığı qurulur"
+msgid "No floppy drive available"
+msgstr "Disket sĂŒrĂŒcĂŒ yoxdur"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr "XahiƟ edirik bu kompĂŒter ĂŒĂ§ĂŒn IP qurğularını girin"
+msgid "Backup files are corrupted"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
+msgid "TV norm:"
msgstr ""
-"DÄ°QQƏT: Bu avadanlıq daha əvvəl Ä°ntenetə bağlanmaq ĂŒĂ§ĂŒn qurulmuƟdur.\n"
-"Avadanlığın qurğularını dəyiƟdirmaək istəmirsiniz isə,\n"
-"OLDU ya basın.\n"
-"AƟağıdakı giriƟləri dĂŒzəltməniz özĂŒnĂŒ əvvəlki qurğuların ĂŒstĂŒnə yazacaqdır."
-#: ../../network/shorewall.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
+msgid "Cpuid family"
msgstr ""
-"Diqqət! Var olan Firewall qurğusu tapıldı. YĂŒkləmədən sonra bir az əl "
-"gəzdirə bilərsiniz."
-#: ../../network/shorewall.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Oddan divar (Firewall) quruluƟu tapıldı!"
+msgid "32 MB"
+msgstr "32 MB"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Account Password"
-msgstr "Hesap Parolu"
+msgid "Lithuanian AZERTY (new)"
+msgstr "Litvanya dili AZERTY (yeni)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Account Login (user name)"
-msgstr "Hesab GiriƟi (istifadəçi adı)"
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../fsedit.pm:1
#, fuzzy, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Bağlantı növĂŒ:"
+msgid ""
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
+msgstr ""
+"Bir proqram tə'minatlı RAID bölməsini kök qovluğu (/) olaraq tə'yin "
+"etdiniz.\n"
+"Əgər lilo ya da grub istifadə etmək istəyirsinizsə, bir /boot bölməsi\n"
+"əlavə etməyi unutmayın"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Connection speed"
-msgstr "Bağlantı növĂŒ:"
+msgid "Previous"
+msgstr "<- Əvvəlki"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "Dialing mode"
-msgstr "Yığma modu"
-
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid "Choose your country"
-msgstr "Klaviaturanızı seçin"
+msgid "Other OS (MacOS...)"
+msgstr "Digər sistemlər (MacOS...)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "Dns xidmətcisi 2 (arzuya görə)"
+msgid "To activate the mouse,"
+msgstr "Siçanınızı iƟə salmaq ĂŒĂ§ĂŒn,"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "Dns xidmətcisi 1 (arzuya görə)"
+msgid "Bringing up the network"
+msgstr "ƞəbəkə fəallaƟdırılır"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Provider phone number"
-msgstr "Ä°XM telefon nömrəsi"
+#: ../../common.pm:1
+#, fuzzy, c-format
+msgid "Screenshots will be available after install in %s"
+msgstr "Qurulumdan sonra istifadə edə biləcəyiniz baƟqa dillər seçə bilərsiniz"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "İnternet xidmət vericinizin adı (məsələn azeronline.com)"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
+msgstr ""
+"SĂŒrĂŒcĂŒnĂŒzdə bir və ya daha çox Windows bölməsi tapıldı.\n"
+"XahiƟ edirik Linuks Mandrakeni qurmaq ĂŒĂ§ĂŒn onlardan birini "
+"yenidənölĂ§ĂŒləndirmək ĂŒzərə seçin.\n"
+"\n"
+"\n"
+"Xəbəriniz olsun, her bölmə bu cĂŒr sıralanıb; \"Linuks adı\",\"Windows\n"
+"adı\"\"Həcm\".\n"
+"\n"
+"\"Linuks adı\" bu cĂŒr kodlanıb: \"sĂŒrĂŒcĂŒ növĂŒ\", \"sĂŒrĂŒcĂŒ nömrəsi\",\"bölmə "
+"nömrəsi\" (məsələn, \"hda\").\n"
+"\n"
+"\n"
+"\"SĂŒrĂŒcĂŒ növĂŒ\" sĂŒrĂŒcĂŒnĂŒz IDE sĂŒrĂŒcĂŒ isə \"hd\"dirSCSI sĂŒrĂŒcĂŒ isə\n"
+"\"sd\"dir.\n"
+"\n"
+"\n"
+"\"SĂŒrĂŒcĂŒ nömrəsi\" həmiƟə \"hd\" və ya \"sd\"dən sonrakı rəqəmdir.IDE "
+"sĂŒrĂŒcĂŒlər ĂŒĂ§ĂŒn:\n"
+"\n"
+"*\"a\" yəni \"birinci IDE idarəcisində ali sĂŒrĂŒcĂŒ\",\n"
+"\n"
+"*\"b\" yəni \"birinci IDE idarəcisində kölə sĂŒrĂŒcĂŒ\",\n"
+"\n"
+"*\"c\" yəni \"ikinci IDE idarəcisində ali sĂŒrĂŒcĂŒ\",\n"
+"\n"
+"*\"d\" yəni \"ikinci IDE idarəcisində kölə sĂŒrĂŒcĂŒ\".\n"
+"\n"
+"\n"
+"SCSI sĂŒrĂŒcĂŒlərində \"a\" nın mənası \"birinci sĂŒrĂŒcĂŒ\",\n"
+"\"b\"nin mənası \"ikinci sĂŒrĂŒcĂŒ\"dĂŒr vs..."
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Your personal phone number"
-msgstr "Sizin Ɵəxsi telefon nömrəniz"
+msgid "Tanzania"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Card IO_1"
-msgstr "Kart IO_1"
+msgid "Computing FAT filesystem bounds"
+msgstr "Fat fayl sistemi ucları hesaplanır"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Card IO_0"
-msgstr "Kart IO_0"
+msgid ""
+"\n"
+"Backup Sources: \n"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Card IO"
-msgstr "Kart IO"
+msgid "Content of the file"
+msgstr "Fayl məzmunu"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Card mem (DMA)"
-msgstr "Kart mem (DMA)"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Authentication LDAP"
+msgstr "Tanıtma"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Card IRQ"
-msgstr "Kart IRQ"
+msgid "Let me pick any driver"
+msgstr ""
-#: ../../network/tools.pm:1
-#, c-format
-msgid "Please fill or check the field below"
-msgstr "XahiƟ edirik aƟağıdakıları doldurun ya da seçin"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Profile "
+msgstr "Profil: "
-#: ../../network/tools.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Connection Configuration"
-msgstr "Bağlantı quraƟdırılması"
-
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+msgid "transmitted"
msgstr ""
-"Sisteminiz İnternetə bağlı deyil.\n"
-"Bağlantını yenidən quraƟdırın"
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "TəhlĂŒkəsizlik səbəbi ilə indi bağlantı qopacaqdır."
-
-#: ../../network/tools.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "The system is now connected to the Internet."
-msgstr "İnternetə artıq bağlısınız"
+msgid "Palestine"
+msgstr "Paket seçkilərini saxla"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Testing your connection..."
-msgstr "Bağlantınız sınanır..."
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
-#: ../../network/tools.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Ä°nternete giriƟi indi sınamaq istəyirsiniz?"
+msgid "%d comma separated strings"
+msgstr ""
-#: ../../network/tools.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Internet configuration"
-msgstr "İnternet qurğuları"
+msgid "Here is the full list of keyboards available"
+msgstr "BĂŒtĂŒn mövcud klaviaturaların siyahısı"
-#: ../../partition_table/raw.pm:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
+msgid "Theme name"
+msgstr "PaylaƟdırma adı"
+
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#, c-format
+msgid "/_Help"
+msgstr "/_Kömək"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
msgstr ""
-"Bə'zən sĂŒrĂŒcĂŒnĂŒzdə pis Ɵeylər ola bilər.\n"
-"Datanın bĂŒtövlĂŒyĂŒ yoxlaması bacarılmadı. \n"
-"Bu o demekdir ki diskə yazılan hər Ɵey təsadĂŒfi olacaqdır"
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid " (Default)"
-msgstr " (Əsas)"
+msgid "the width of the progress bar"
+msgstr ""
-#: ../../printer/cups.pm:1
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "CUPS verici IP"
+#: ../../lang.pm:1
+#, c-format
+msgid "Cook Islands"
+msgstr "Kuku Adaları"
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../fs.pm:1
+#, c-format
+msgid "Formatting partition %s"
+msgstr "ƞəkilləndirilən bölmə: %s"
+
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Remote Printers"
-msgstr "Uzaq Çap Edici"
+msgid "Hostname required"
+msgstr "Ev sahibi adı:"
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "CUPS"
+msgid "Unselect fonts installed"
msgstr ""
-#: ../../printer/cups.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "(on this machine)"
-msgstr ""
+msgid "Cancel"
+msgstr "Ləğv et"
-#: ../../printer/cups.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(modul %s)"
+msgid "Searching for configured scanners ..."
+msgstr "Yerli Çap Edici"
-#: ../../printer/data.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
+msgid "Wheel"
+msgstr "Çərx"
-#: ../../printer/data.pm:1
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Videocard"
+msgstr "Ekran modu"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LPRng"
+msgid "\tBackups use tar and bzip2\n"
msgstr ""
-#: ../../printer/data.pm:1
-#, c-format
-msgid "LPRng - LPR New Generation"
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Remove Selected"
+msgstr "Növbəni sil"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _modems"
+msgstr "Avtomatik təsbit iƟlət"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove printer"
+msgstr "Uzaq Çap Edici"
+
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
msgstr ""
+"DİQQƏT!\n"
+"\n"
+"DrakX \"Windows\" disk bölmənizin böyĂŒklĂŒyĂŒnĂŒ dəyiƟdirəcək. Bu iƟ \n"
+"tehlĂŒkəli ola bilər. AƟina deyil isəniz qurulumdan çıxın və \"Windows\" \n"
+"altında \"Scandisk\" (lazım gələrsə \"defrag\" da) proqramını çalÄ±ĆŸdırın. "
+"Ardından quruluma \n"
+"davam edin. Verilərinizin yedəyini almağı da unutmayın!"
-#: ../../printer/data.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "LPD"
+msgid "Which services would you like to allow the Internet to connect to?"
msgstr ""
-#: ../../printer/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "LPD - Line Printer Daemon"
+msgid ""
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
msgstr ""
-#: ../../printer/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "PDQ"
-msgstr ""
+msgid "Other"
+msgstr "Digər"
-#: ../../printer/data.pm:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
+msgid "Default"
+msgstr "Əsas"
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Unknown Model"
-msgstr ""
+msgid "Button 2 Emulation"
+msgstr "DĂŒymə 2 emulyasiyası"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Unknown model"
+msgid "type1inst building"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "%s (Port %s)"
-msgstr "Qapı"
+msgid "Abiword"
+msgstr "Dayandır"
-#: ../../printer/main.pm:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Host %s"
-msgstr "Ev sahibi adı"
+msgid "choose image file"
+msgstr "Monitorunuzu seçin"
-#: ../../printer/main.pm:1
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "X server"
+msgstr "X verici"
+
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Network %s"
-msgstr "ƞəbəkə ara ĂŒzĂŒ"
+msgid "Domain Admin User Name"
+msgstr "Sahə(domain) adı"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, fuzzy, c-format
-msgid "Interface \"%s\""
-msgstr "Ara ĂŒz %s"
+msgid "There was an error while scanning for TV channels"
+msgstr "Paketlər qurulurkən bir xəta oldu:"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "US keyboard (international)"
+msgstr "Amerikan (US) klaviaturası (beynəlmiləl)"
+
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Local network(s)"
-msgstr "Ɵəbəkə kartı tapılmadı"
+msgid "Not installed"
+msgstr "Qurulumdan çıx"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Raw printer (No driver)"
-msgstr ""
+msgid "LAN connection"
+msgstr "Yerli ƞəbəkə quraƟdırılması"
-#: ../../printer/main.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ", using command %s"
-msgstr ""
+msgid "/File/-"
+msgstr "/Fayl/-"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr ""
+msgid "Italian"
+msgstr "Ä°talyanca"
-#: ../../printer/main.pm:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgid "Basic"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
+msgid "Honduras"
+msgstr "Honduras"
+
+#: ../../help.pm:1
+#, c-format
+msgid "pdq"
msgstr ""
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "%s faylına yazarkən xəta oldu"
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Card IO"
+msgstr "Kart IO"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ", multi-function device"
+msgid "when checked, owner and group won't be changed"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", multi-function device on HP JetDirect"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
msgstr ""
+"\n"
+"Bu, ikili açılÄ±ĆŸ ĂŒĂ§ĂŒn xĂŒsusi\n"
+"Bootstrap-dır.\n"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ", multi-function device on USB"
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ", multi-function device on parallel port \\#%s"
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t-Network by FTP.\n"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Russian (Yawerty)"
+msgstr "Rusca (Yawerty)"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ", USB printer"
-msgstr "Çap Edicisiz"
+msgid "You must enter a device or file name!"
+msgstr "Çap Edici avadanlığı URI"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/_Quit"
+msgstr "Çıx"
+
+#: ../../network/adsl.pm:1
#, c-format
-msgid ", USB printer \\#%s"
+msgid ""
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
msgstr ""
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid " on parallel port \\#%s"
+msgid "Graphics memory: %s kB\n"
+msgstr "Ekran kartı yaddaĆŸÄ±: %s KB\n"
+
+#: ../../standalone.pm:1
+#, c-format
+msgid ""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
msgstr ""
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "access to compilation tools"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Local Printers"
-msgstr "Yerli Çap Edici"
+msgid "Please select data to restore..."
+msgstr "XahiƟ edirik istifadə ĂŒĂ§ĂŒn bir dil seçin."
-#: ../../printer/main.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Pipe job into a command"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
msgstr ""
+"Aboot istifadə etməyi istəyirsinizsə, boƟ disk sahəsi (2048 sektor bəsdir.)\n"
+"buraxmayı unutmayın."
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Enter a printer device URI"
-msgstr "Çap Edici avadanlığı URI"
+msgid "Standard test page"
+msgstr "Standart"
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Printer on NetWare server"
-msgstr "Çap Edici Vericisi"
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Create"
+msgstr "Yarat"
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "What"
+msgstr ""
-#: ../../printer/main.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "There was an error ordering packages:"
+msgstr "Paketləri istərkən bir xəta oldu:"
+
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "ƞəbəkə Çap Edicisi (soket) "
+msgid "Bulgarian (BDS)"
+msgstr "Bulqarca"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Printer on remote lpd server"
-msgstr "Uzaq çap edici vericisi(lpd)"
+msgid "Disable Server"
+msgstr "Databeyz"
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Uzaq CUPS vericisi"
+msgid "Filesystem encryption key"
+msgstr "Fayl sistemi növĂŒ: "
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Remote printer"
-msgstr "Uzaq Çap Edici"
+msgid "Gujarati"
+msgstr ""
-#: ../../printer/main.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Local printer"
-msgstr "Yerli Çap Edici"
+msgid ""
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Configuring applications..."
-msgstr "Çap Edicini Qur"
+msgid "Save theme"
+msgstr "Sistemi qur"
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Printerdrake"
-msgstr "Çap Edici"
+msgid "group"
+msgstr "İƟ qrupu"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "CUPS sĂŒrĂŒcĂŒ datası oxunur..."
+#: ../../lang.pm:1
+#, c-format
+msgid "Brazil"
+msgstr "Braziliya"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "ƞəbəkəni yenidən baƟlatmaq istəyirsiniz?"
+msgid "Auto Install"
+msgstr "Qurulum"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove printer"
-msgstr "Uzaq Çap Edici"
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#, c-format
+msgid "Network Configuration Wizard"
+msgstr "ƞəbəkə QuraƟdırılması Sehirbazı"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Learn how to use this printer"
-msgstr "Qurğuları sınamaq istəyirsiniz?"
+msgid "Removable media automounting"
+msgstr "Taxılıb sökĂŒlə bilən avadanlıqların avtomatik bağlanması"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, fuzzy, c-format
-msgid "Print test pages"
-msgstr "Sınaq səhifəsi çap edilir..."
+msgid "Printing"
+msgstr "Çap Edici"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgid "Unkown driver"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
+"There are no printers found which are directly connected to your machine"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "Create a new partition"
+msgstr "Yeni bölmə yarat"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr ""
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid "Driver:"
+msgstr "SĂŒrĂŒcĂŒ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr ""
+msgid "unknown"
+msgstr "bilinməyən"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr ""
+msgid "Use fdisk"
+msgstr "Fdisk istifadə et"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "MOVE YOUR WHEEL!"
+msgstr "TƏKƏRİ OYNADIN!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgid "sent: "
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Default printer"
-msgstr "Yerli Çap Edici"
+msgid "Automatic IP"
+msgstr "AvtomatlaƟdırılmÄ±ĆŸ IP"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Set this printer as the default"
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+" Note that two different options are available after clicking the button:\n"
+"\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Printer options"
-msgstr "Çap edici seçənəkləri"
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer manufacturer, model"
+msgid "Configuration of a remote printer"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr ""
+msgid "Moldova"
+msgstr "Moldova"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "CUPS sĂŒrĂŒcĂŒ datası oxunur..."
+msgid "Please check if you want to erase your tape before the backup."
+msgstr "XahiƟ edirik qurmaq istədiyiniz paketləri seçin."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer name, description, location"
-msgstr "Çap Edici Bağlantısı"
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#, c-format
+msgid "An online platform to respond to enterprise support needs."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "Printer connection type"
-msgstr "Ä°nternet Bağlantısı BölĂŒĆŸdĂŒrĂŒlməsi"
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "Vəkil verici http://... Ɵəklində olmalıdır."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Raw printer"
+msgid "Add a new rule at the end"
msgstr "Çap Edicisiz"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do it!"
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Close"
-msgstr "Qapat"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "Qurğuları sınamaq istəyirsiniz?"
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
+msgstr ""
+"Ä°stəsəniz indi %s modulunun parametrlərini göstərə bilərsiniz.\n"
+"Parametrlər``ad=qiymət ad2=qiymət2...'' Ɵəklində olmalıdır.\n"
+"Məsələn ``io=0x300 irq=7''"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Modify printer configuration"
-msgstr "İnternet qurğuları"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Quit without writing the partition table?"
+msgstr "Bölmə cədvəlini qeyd etmədən çıxırsınız?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
+#, c-format
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
+
+#: ../../standalone.pm:1
#, fuzzy, c-format
-msgid "Add a new printer"
-msgstr "Çap Edicisiz"
+msgid "Installing packages..."
+msgstr "%s paketi qurulur"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Normal Mode"
-msgstr "Normal Mod"
+msgid "Dutch"
+msgstr "Hollandiya dili"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Change the printing system"
-msgstr "ƞəbəkəni qur"
+msgid "The following packages need to be installed:\n"
+msgstr "AƟağıdakı paketlər qurulacaqdır"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Angola"
+msgstr "Anqola"
+
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "CUPS configuration"
-msgstr "Yerli ƞəbəkə QuraƟdırılması"
+msgid "service setting"
+msgstr "avadanlıq"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgid "Custom"
+msgstr "XĂŒsusi"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "File is already used by another loopback, choose another one"
msgstr ""
+"Fayl baƟqa bir loopback tərəfindən istifadədədir, baƟqa\n"
+"birini seçin"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Display all available remote CUPS printers"
+msgid "Read-only"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"AƟağıda yazıçıdakı növbələr verilmiƟdir.\n"
-"Yenilərini əlavə edə bilər, və ya mövcud olanları dəyiƟdirə bilərsiniz."
+#: ../../lang.pm:1
+#, c-format
+msgid "Latvia"
+msgstr "Latviya"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Printing system: "
+msgid "No known driver"
msgstr ""
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "1 MB"
+msgstr "1 MB"
+
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Checking installed software..."
+msgid ""
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing Foomatic..."
-msgstr "%s paketi qurulur"
+#: ../../standalone/draksound:1
+#, c-format
+msgid ""
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "Çap Edicini Qur"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Configure Local Area Network..."
+msgstr "Yerli ƞəbəkəni QuraƟdır..."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Çap Edicini Qur"
+#: ../../services.pm:1
+#, c-format
+msgid "Launch the sound system on your machine"
+msgstr "KompĂŒterinizdə səs sistemı baƟladın"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Reading printer data..."
+msgid "Preparing printer database..."
msgstr "CUPS sĂŒrĂŒcĂŒ datası oxunur..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Hansı çap edici sistemini istifadə etmək istəyirsiniz?"
+msgid "Information"
+msgstr "Mə'lumatı göstər"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
#, fuzzy, c-format
-msgid "Select Printer Spooler"
-msgstr "Çap Edici Bağlantısı Seçin"
+msgid "No network card"
+msgstr "Ɵəbəkə kartı tapılmadı"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Setting Default Printer..."
-msgstr "Yerli Çap Edici"
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#, c-format
+msgid "Which filesystem do you want?"
+msgstr "Hansı dili istəyirsiniz?"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing %s ..."
-msgstr "%s paketi qurulur"
+#: ../../mouse.pm:1
+#, c-format
+msgid "3 buttons"
+msgstr "3 dĂŒyməli"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Removing %s ..."
-msgstr "Rezolyusiya: %s\n"
+msgid "Detailed information"
+msgstr "Mə'lumatı göstər"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Hansı çap edici sistemini istifadə etmək istəyirsiniz?"
+msgid "Malta"
+msgstr "Malta"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
+"Printer default settings\n"
"\n"
-"Do you really want to configure printing on this machine?"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
+msgid "This floppy is not FAT formatted"
+msgstr "Bu floppi FAT Ɵəklində deyildir"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "paranoid"
-msgstr "ĆžĂŒbhəci"
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, c-format
+msgid "Configuring network"
+msgstr "ƞəbəkə Qurğuları"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
#, fuzzy, c-format
-msgid "high"
-msgstr "YĂŒksək"
+msgid "Graphic Card"
+msgstr "Ekran kartı"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Restarting printing system..."
-msgstr "Hansı çap edici sistemini istifadə etmək istəyirsiniz?"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Resizing Windows partition"
+msgstr "Fat fayl sistemi ucları hesaplanır"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Configuration of a remote printer"
-msgstr ""
+msgid "Provider dns 1 (optional)"
+msgstr "Dns xidmətcisi 1 (arzuya görə)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
+msgid "Cameroon"
+msgstr "Kamerun"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
msgstr ""
+"Ä°ndi %s sabit diskinizi bölmələndirə bilərsiniz\n"
+"İƟinizi bitirdiyinizdə `w' ilə qeyd etməyi unutmayın"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configure the network now"
-msgstr "ƞəbəkəni qur"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Go on without configuring the network"
-msgstr "ƞəbəkə Qurğuları"
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Close"
+msgstr "Qapat"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Network functionality not configured"
-msgstr "Monitor qurulmayıb"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Starting network..."
-msgstr "Bağlantınız baƟladılır..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Refreshing printer data..."
-msgstr "CUPS sĂŒrĂŒcĂŒ datası oxunur..."
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Calendar"
+msgstr "Təqvim"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
+"Restore Selected\n"
+"Catalog Entry"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Transfer printer configuration"
-msgstr "İnternet qurğuları"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Transferring %s..."
+msgid ""
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
msgstr ""
+"Uzaqdakı bir lpd çap edici növbəsini istifadə etmək ĂŒĂ§ĂŒn, \n"
+"çap edicinin bağlı olduğu çap edici vericisinin adını və növbə \n"
+"adınını verməlisiniz."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "New printer name"
-msgstr "Çap Edicisiz"
+#: ../../lang.pm:1
+#, c-format
+msgid "Iceland"
+msgstr "Ä°slandiya"
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
+msgid "consolehelper missing"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Çap edici adı təkcə hərf, rəqəm və alt xətt daxil edə bilər"
+msgid "stopped"
+msgstr "dayandırılıb"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Transfer"
+msgid "Whether the FPU has an irq vector"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
+msgid "Ext2"
+msgstr "Ext2"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Do not transfer printers"
-msgstr ""
+msgid "Expand Tree"
+msgstr "Ağacı Aç"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
+"The old \"%s\" driver is blacklisted.\n"
"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
+"It has been reported to oops the kernel on unloading.\n"
"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
+"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
+msgid "Expert Mode"
+msgstr "Usta Modu"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
+msgid "Printer options"
+msgstr "Çap edici seçənəkləri"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Local Network adress"
+msgstr "Ɵəbəkə kartı tapılmadı"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup your System files. (/etc directory)"
+msgstr "Xətalı yedəkləmə faylı"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
+"\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
+"\n"
+"Do you want to install the updates ?"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Samba Server"
+msgstr "NIS Verici"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
+"Arguments: (arg, alert=1)\n"
+"\n"
+"Enable/Disable IP spoofing protection."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
+msgid "Australian Optus cable TV"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
msgstr ""
+" <Tab>/<Alt-Tab> irəli/geri | <BoƟluq> iƟarətlə | <F12> sonrakı ekran"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
+msgid "Subnet:"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printing test page(s)..."
-msgstr "Sınaq səhifəsi çap edilir..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Print option list"
-msgstr "Çap edici seçənəkləri"
+msgid "Zimbabwe"
+msgstr "Zimbabve"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "ƞəbəkə dayandırılır"
+msgid "Please enter the host name or IP."
+msgstr "XahiƟ edirik siçanınızı seçin"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "ƞəbəkə dayandırılır"
+msgid "When"
+msgstr "Çərx"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "ƞəbəkə dayandırılır"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Second DNS Server (optional)"
+msgstr "Ä°kinci DNS Vericisi (arzuya görə)"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "ƞəbəkə dayandırılır"
+#: ../../lang.pm:1
+#, c-format
+msgid "Finland"
+msgstr "Finlandiya"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"Arguments: (arg)\n"
"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
+msgid "Color depth: %s\n"
+msgstr "Rəng dərinliyi: %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "Bu paketi sistemdən çıxarda bilməzsiniz. Yenilənməlidir"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Loading from floppy"
+msgstr "Disketdən geri çağır"
+
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
+msgid "Slovenia"
+msgstr "Sloveniya"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
+"Enter a user\n"
+"%s"
msgstr ""
+"Bir istifadəçi girin\n"
+"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "ProgressBar color selection"
+msgstr "Çap Edici Bağlantısı"
+
+#: ../../any.pm:1
#, c-format
msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
msgstr ""
+"Buradakı bir birindən fərqli seçənəklərə yenilərini əlavə edə bilər,\n"
+"ya da mövcud olanları dəyiƟdirə bilərsiniz."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
+#, c-format
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
msgstr ""
+"at əmri, zamanlanan əmrləri iƟləmələri lazım gələn vaxtda iƟlədir.\n"
+"Sistem yĂŒkĂŒ lazımi qədər alçaq olduğunda yığma əmrləri iƟlədilir."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Did it work properly?"
+msgid "Radio support:"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Sınaq səhifəsi çap edici vasitəsinə göndərildi.\n"
-"Çap edicinin iƟləməsi ĂŒĂ§ĂŒn bir az vaxt keçər.\n"
-"DĂŒz mĂŒ iƟləyir?"
+msgid "Installing SANE packages..."
+msgstr "%s paketi qurulur"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "boot disk creation"
+msgstr "açılÄ±ĆŸ disketi yaradılması"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "LDAP"
msgstr ""
-"Sınaq səhifəsi çap edici vasitəsinə göndərildi.\n"
-"Çap edicinin iƟləməsi ĂŒĂ§ĂŒn bir az vaxt keçər.\n"
-"Çap vəziyyəti:\n"
-"%s\n"
-"\n"
-"DĂŒz mĂŒ iƟləyir?"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do not print any test page"
-msgstr "Sınaq səhifəsi çap edilir..."
+#: ../../bootloader.pm:1
+#, c-format
+msgid "SILO"
+msgstr "SILO"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
#, fuzzy, c-format
-msgid "Photo test page"
-msgstr "Sınaq səhifəsi çap edilir..."
+msgid "Change type"
+msgstr "Bölmə növĂŒnĂŒ DəyiƟdir"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Alternative test page (A4)"
-msgstr "Sınaq səhifəsi çap edilir..."
+#: ../../any.pm:1
+#, c-format
+msgid "SILO Installation"
+msgstr "SILO Qurulumu"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Alternative test page (Letter)"
+msgid "Use CD/DVDROM to backup"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_messages.pm:1
#, fuzzy, c-format
-msgid "Standard test page"
-msgstr "Standart"
+msgid ""
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
+"\n"
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
+msgstr ""
+"Təbriklər, quruluƟ bitdi.\n"
+"Cdrom və disketi çıxartdıqtan sonra Enter'ə basaraq kompĂŒterinizi \n"
+"yenidən baƟladın. Linuks Mandrake'nin bu buraxılÄ±ĆŸÄ±ndakı yamaqlar haqqında \n"
+"mə'lumat almaq ĂŒĂ§ĂŒn http://www.mandrakelinux.com ĂŒnvanından Errata'ya "
+"baxın.\n"
+"Sisteminizin qurğuları haqqında daha geniƟ bilgiyi Linuks Mandrake \n"
+"Ä°stifadəçi Kitabcığında tapa bilərsiniz."
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Print"
-msgstr "Çap Edici"
+msgid "paranoid"
+msgstr "ĆžĂŒbhəci"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "No test pages"
-msgstr "Bəli, hər iki sınaq səhifəsini də çap et"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Send mail report after each backup to:"
+msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
+"This command you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications. But here do not supply the file name "
+"because the file to print is provided by the application.\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Test pages"
-msgstr "Qapıları sına"
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolution"
+msgstr "Rezolyusiya"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Çap edicini sınamaq istəyirsiniz?"
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
+msgstr ""
+"Bir SMB çap edicidən yekun almaq ĂŒĂ§ĂŒn, SMB kompĂŒter adı, çap edici "
+"vericisinin\n"
+"IP ĂŒnvanı, çap edicinin paylaƟdırma adı, iƟləmə grupu, istifadəçi adı və \n"
+"parol verilməlidir."
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Option %s out of range!"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse icmp echo."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
+msgid "reconfigure"
+msgstr "yenidən quraƟdır"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Option %s must be an integer number!"
+msgid ""
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
+"Sizin kartınızın XFree %s ilə 3D dəstəyi ola bilər.\n"
+"DÄ°QQƏT! BU SINAQ MƏRHƏLƏSINDƏDIR VƏ KOMPÜTERÄ°NÄ°Z DONDURA BILƏR."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Printer default settings"
-msgstr "Çap Edici Bağlantısı"
+msgid "Xinetd Service"
+msgstr "Çap Edici Vericisi"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
+msgid "access to network tools"
msgstr ""
#: ../../printer/printerdrake.pm:1
@@ -10681,554 +10359,566 @@ msgstr ""
msgid "Firmware-Upload for HP LaserJet 1000"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
msgstr ""
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "İnternet qurğuları"
+#, c-format
+msgid "Here is a list of all auto-detected printers. "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
msgstr ""
+"aboot qurulumunda xata, \n"
+"ilk disk bölməsini yox etsə belə yenə də qurulmasını istəyirsiniz?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+"Options Description:\n"
+"\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
+"\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "OKI winprinter configuration"
-msgstr "İnternet qurğuları"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
+"Restore Selected\n"
+"Files"
+msgstr "Növbəni sil"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
+"%s exists, delete?\n"
"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Which printer model do you have?"
-msgstr "Nə cĂŒr bir çap ediciniz var?"
+#: ../../network/tools.pm:1
+#, c-format
+msgid "Please fill or check the field below"
+msgstr "XahiƟ edirik aƟağıdakıları doldurun ya da seçin"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Printer model selection"
-msgstr "Çap Edici Bağlantısı"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "Qurğuları sınamaq istəyirsiniz?"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Reading printer database..."
-msgstr "CUPS sĂŒrĂŒcĂŒ datası oxunur..."
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Boot Protocol"
+msgstr "AçılÄ±ĆŸ Protokolu"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Select model manually"
-msgstr "Uzaq Çap Edici"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "LVM-disks %s\n"
+msgstr "LVM-diskləri %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "The model is correct"
-msgstr "Doğrudur?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
+msgid "The package %s is needed. Install it?"
msgstr ""
+"Bu paket yenilənməlidir\n"
+"Sistemdən çıxarmaq mövzusunda ciddisiniz?"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Your printer model"
-msgstr "Uzaq Çap Edici"
+#: ../../services.pm:1
+#, c-format
+msgid "On boot"
+msgstr "AçılÄ±ĆŸda"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Preparing printer database..."
-msgstr "CUPS sĂŒrĂŒcĂŒ datası oxunur..."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Location"
-msgstr "Yeri"
+msgid "Bus identification"
+msgstr "Tanıtma"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Description"
-msgstr "Ä°zah"
+msgid "Please make a backup of your data first"
+msgstr "Əvvəlcə datanızın yedəyini alın"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Name of printer"
-msgstr "Çap edici adı"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Vatican"
+msgstr "Yeri"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
+msgid "You have more than one hard drive, which one do you install linux on?"
msgstr ""
+"Sizin birdən çox diskiniz var, linux qurmaq ĂŒĂ§ĂŒn hansını istifadə "
+"edəcəksiniz?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Enter Printer Name and Comments"
+msgid "Boot ISO"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr ""
+msgid "Eritrea"
+msgstr "Eritre"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Remove List"
+msgstr "Uzaq Çap Edici"
+
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
-msgid "Checking device and configuring HPOJ..."
+msgid "A customizable environment"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Photo memory card access on your HP multi-function device"
+msgid "Inuktitut"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr ""
+msgid "Morocco"
+msgstr "MərakeƟ"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Installing mtools packages..."
-msgstr "%s paketi qurulur"
+msgid "Which printer model do you have?"
+msgstr "Nə cĂŒr bir çap ediciniz var?"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Installing SANE packages..."
-msgstr "%s paketi qurulur"
+msgid "Add a new printer"
+msgstr "Çap Edicisiz"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid " All of your selected data have been "
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Installing HPOJ package..."
-msgstr "%s paketi qurulur"
+msgid "<-- Delete"
+msgstr "Sil"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
+msgid "Nepal"
+msgstr "Nepal"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "cpu # "
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "A command line must be entered!"
+msgid "chunk size"
+msgstr "parça böyĂŒklĂŒyĂŒ"
+
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
+#, c-format
+msgid "commands before booting, or 'c' for a command-line."
msgstr ""
+"acilisdan evvel emrleri duzeltmək ucun 'e', emr setiri ucun ise 'c' basin"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Command line"
-msgstr "Sahə(domain) adı"
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#, c-format
+msgid "Problems installing package %s"
+msgstr "%s paketi qurulurkən xəta oldu"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "You will receive an alert if the load is higher than this value"
+msgstr ""
+
+#: ../../standalone/drakbug:1
#, c-format
msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Pipe into command"
+msgid "Add a scanner manually"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Detected model: %s %s"
-msgstr "%s tapıldı"
+msgid "Reload partition table"
+msgstr "Bölmə cədvəlini qurtar"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "A valid URI must be entered!"
+msgid "Yes, I want autologin with this (user, desktop)"
msgstr ""
+"Bəli, bu istifadəçi ĂŒĂ§ĂŒn avtomatik giriƟ istəyirəm (istifadəçi, masa ĂŒstĂŒ)"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer Device URI"
-msgstr "Çap Edici avadanlığı URI"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
+msgid "Search for fonts in installed list"
msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Port"
-msgstr "Qapı"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer host name or IP"
-msgstr "Çap Edici Ev sahibi"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "The port number should be an integer!"
-msgstr "Qapı nömrəsi rəqəmlə yazılmalıdır"
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Çap Edici Ev sahibi"
+msgid "Boot"
+msgstr "Kök"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, fuzzy, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"Soket çap edicidən yekun almaq ĂŒĂ§ĂŒn, çap edicinin ev sahibi adını ve "
-"mĂŒmkĂŒnsə, qapısının nömrəsini verməlisiniz."
+msgid "Tuner type:"
+msgstr "Bölmə növĂŒnĂŒ DəyiƟdir"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "Soket Çap Edici Qurğuları"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Host \"%s\", port %s"
+msgid "\"Menu\" key"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ", host \"%s\", port %s"
+msgid ""
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "Scanning network..."
-msgstr "Bağlantınız baƟladılır..."
+msgid "Security Administrator:"
+msgstr "Uzaq Çap Edici (lpd) Seçənəkləri"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Printer auto-detection"
-msgstr "Avtomatik təsbit iƟlət"
+msgid "Please enter your login"
+msgstr "XahiƟ edirik təkrar sınayın"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "NCP queue name missing!"
+msgid "if set to yes, check permissions of files in the users' home."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "NCP server name missing!"
+msgid ""
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
msgstr ""
+"Heç Ä°nternet bağlantınız yoxdur.\n"
+"Əvvəlcə onları 'QuraƟdır'a basaraq qurun"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Print Queue Name"
-msgstr "Çap Edici Növbə Adı"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Printer Server"
-msgstr "Çap Edici Vericisi"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
+msgid "Fonts copy"
msgstr ""
-"NetWare çap edicidən yekun almaq ĂŒĂ§ĂŒn, NetWare vericisinin adı və çap "
-"edici \n"
-"növbəsi adı ilə istifadəçi adı va parolu verilməlidir."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "NetWare Printer Options"
-msgstr "NetWare Çap Edici Qurğuları"
+msgid "Automated"
+msgstr "AvtomatlaƟdırılmÄ±ĆŸ"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
+msgid "Do you want to test the configuration?"
+msgstr "Qurğuları sınamaq istəyirsiniz?"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+" to the Internet as a client.\n"
"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
+"High: There are already some restrictions, and more automatic checks "
+"are run every night.\n"
"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
+"Higher: The security is now high enough to use the system as a server "
+"which can accept\n"
+" connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+" should choose a lower level.\n"
"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
+"Paranoid: This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+" features are at their maximum\n"
"\n"
+"Security Administrator:\n"
+" If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+" email)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "SECURITY WARNING!"
-msgstr ""
+msgid "Save packages selection"
+msgstr "Paket seçkilərini saxla"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Remove the last item"
+msgstr "Loopback faylı Ɵəkilləndirilir: %s"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Samba share name missing!"
+msgid "User list to restore (only the most recent date per user is important)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Either the server name or the server's IP must be given!"
+msgid "No net boot images created!"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Auto-detected"
-msgstr "Avtomatik təsbit iƟlət"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Workgroup"
-msgstr "İƟ qrupu"
+msgid "use pptp"
+msgstr "pptpe istifadə et"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Share name"
-msgstr "PaylaƟdırma adı"
+msgid "Choose which services should be automatically started at boot time"
+msgstr "AçılÄ±ĆŸda avtomatik olaraq baƟlayacaq xidmətləri seçin"
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB server IP"
-msgstr "SMB verici IP"
+#, fuzzy, c-format
+msgid "Learn how to use this printer"
+msgstr "Qurğuları sınamaq istəyirsiniz?"
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB server host"
-msgstr "SMB verici adı"
+#, fuzzy, c-format
+msgid "Configure the network now"
+msgstr "ƞəbəkəni qur"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
+msgid "Choose a mirror from which to get the packages"
+msgstr "Paketleri almaq ĂŒĂ§ĂŒn bir əks ĂŒnvanı seçin"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../install_interactive.pm:1
+#, c-format
msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
msgstr ""
-"Bir SMB çap edicidən yekun almaq ĂŒĂ§ĂŒn, SMB kompĂŒter adı, çap edici "
-"vericisinin\n"
-"IP ĂŒnvanı, çap edicinin paylaƟdırma adı, iƟləmə grupu, istifadəçi adı və \n"
-"parol verilməlidir."
+"FAT tədqiqatçımız sizin bölĂŒmləri iƟlədə bilmir,\n"
+"bu xəta oldu: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) Çap Edici Seçənəkləri"
+msgid "Which sector do you want to move it to?"
+msgstr "Hansı sektora daĆŸÄ±maq istəyirsiniz?"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, fuzzy, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "ƞəbəkə dayandırılır"
+msgid "Do you want to click on this button?"
+msgstr "aboot istifadə etmək istəyirsiniz?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remote printer name missing!"
-msgstr "Uzaqdakı ev sahibi adı"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remote host name missing!"
-msgstr "Uzaqdakı ev sahibi adı"
+msgid "Bahamas"
+msgstr "Bahama"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Remote printer name"
-msgstr "Uzaq Çap Edici"
+msgid "Manual configuration"
+msgstr "QuraƟdırma"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remote host name"
-msgstr "Uzaqdakı ev sahibi adı"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "search"
+msgstr "axtar"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../services.pm:1
+#, c-format
msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
msgstr ""
-"Uzaqdakı bir lpd çap edici növbəsini istifadə etmək ĂŒĂ§ĂŒn, \n"
-"çap edicinin bağlı olduğu çap edici vericisinin adını və növbə \n"
-"adınını verməlisiniz."
+"Bu paket /etc/sysconfig/keyboard'dakı seçili klaviatura dĂŒzĂŒlĂŒĆŸĂŒnĂŒ yĂŒklər.\n"
+"Hansı klaviatura dĂŒzĂŒlĂŒĆŸĂŒ istifadə ediləcəyi kbdconfig ilə seçilir.\n"
+"Bu, mandrake qurulan bir çox kompĂŒterdə fəal buraxılmalıdır."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Uzaq Çap Edici (lpd) Seçənəkləri"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Manual configuration"
-msgstr "QuraƟdırma"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Çap Edici avadanlığı URI"
+msgid "Xpmac (installation display driver)"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+msgid "Zeroconf host name must not contain a ."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Modeminizin hansı serial qapıya bağlı olduğunu seçiniz"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
msgstr ""
+"Syslog, bir çox vasitənin ismarıclarını mĂŒxtəlif sistem qeydlərində\n"
+"tutmalarına imkan verər. Syslog'un hər zaman iƟləməsi\n"
+"yaxĆŸÄ± fikirdir."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Modeminizin hansı serial qapıya bağlı olduğunu seçiniz"
+msgid "Unknown/Others"
+msgstr "Ümumi"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+msgid "No TV Card detected!"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr ""
+msgid "Options"
+msgstr "Seçənəklər"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Currently, no alternative possibility is available"
+msgid "The printer \"%s\" is set as the default printer now."
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "The following printer was auto-detected. "
-msgstr "AƟağıdakı paketlər sistemdən silinəcəklər"
+msgid "Auto-detected"
+msgstr "Avtomatik təsbit iƟlət"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid ""
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
+msgstr ""
+"KompĂŒterınızi Ä°nternet bağlantısını bölĂŒĆŸdĂŒrmək ĂŒĂ§ĂŒn quraƟdırırsınız.\n"
+"Bu seçənəklə yerli Ɵəbəkənizdəki baƟqa kompĂŒterlər sizin Ä°nternet "
+"bağlantınızdan faydalana biləcəklər.\n"
+"\n"
+"Xəbədarlıq: Yerli ƞəbəkə (LAN) qurmaq ĂŒĂ§ĂŒn uyğun ƞəbəkə Adapterinə "
+"ehtiyacınız var."
+
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
#: ../../printer/printerdrake.pm:1
@@ -11238,944 +10928,877 @@ msgid ""
"name in the input line"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr ""
+msgid "Refuse"
+msgstr "Rədd Et"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "HFS"
+msgstr "HFS"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
msgstr ""
+"HardDrake texniki tə'minat sınağı aparar və onları bir ön quraƟdırmadan "
+"keçirər."
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Available printers"
-msgstr "Yerli Çap Edici"
+msgid "Remote Printers"
+msgstr "Uzaq Çap Edici"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "No printer found!"
-msgstr "Yerli Çap Edici"
+#: ../../fs.pm:1
+#, c-format
+msgid "Creating and formatting file %s"
+msgstr "%s faylı yaradılır və Ɵəkilləndirilir"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "You must enter a device or file name!"
-msgstr "Çap Edici avadanlığı URI"
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of sgid files."
+msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Local Printer"
-msgstr "Yerli Çap Edici"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Choose an existing LVM to add to"
+msgstr "Əlavə etmək ĂŒĂ§ĂŒn mövcud bir LVM seçin"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "USB printer \\#%s"
-msgstr "Çap Edicisiz"
+msgid "xfs restart"
+msgstr "məhdudlaƟdır"
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "Çap Edici Ev sahibi"
+#, c-format
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "SMB/Windows 95/98/NT"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No partition available"
+msgstr "uyğun bölmə tapılmadı"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "ƞəbəkə Çap Edicisi (soket) "
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Use the scanners on hosts: "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "%s tapıldı"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Unselected All"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "SMB/Windows 95/98/NT"
+msgid "Domain Name Resolver"
+msgstr "Sahə(domain) adı"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", network printer \"%s\", port %s"
+msgid "Encryption key (again)"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
+msgid "Samba share name missing!"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgid "True Type install done"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Detection in progress"
+msgstr "%s qapısında tapıldı"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
+msgid "Build Whole Kernel -->"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps.pm:1
+#, c-format
+msgid "Welcome to %s"
+msgstr "%s Sisteminə XoƟgəlmiƟsiniz"
+
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Uzaq Çap Edici"
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "%s sĂŒrĂŒcĂŒsĂŒnə boƟ bir disket yerləƟdirin"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+msgid "Bootsplash"
msgstr ""
#: ../../printer/printerdrake.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
+"The following printer\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
+"%s%s\n"
+"is directly connected to your system"
+msgstr "Siseminizdə Ɵəbəkə adapteri yoxdur!"
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
+#, fuzzy, c-format
+msgid "Printer sharing on hosts/networks: "
+msgstr "Çap Edici"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
+"Bəzi hallarda, %s sĂŒrĂŒcĂŒ dĂŒzgĂŒn iƟləməsi ĂŒĂ§ĂŒn əlavə mə'lumat istəyə bilər.\n"
+"SĂŒrĂŒcĂŒler ĂŒĂ§ĂŒn əlavə bir xĂŒsusiyyət göstərmək mi istəyərsiniz, yoxsa\n"
+"sĂŒrĂŒcĂŒlərin lazımi mə'lumatlar ĂŒĂ§ĂŒn avadalığı tanımasını mı istəyərsiniz? \n"
+"Bə'zən tanımlama kompĂŒterinizi dondura bilər amma donduğu ĂŒĂ§ĂŒn\n"
+"kompĂŒterinizə heç bir Ɵey olmaz."
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ")"
+msgid "Not the correct CD label. Disk is labelled %s."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid " on "
+msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
+"\n"
+"%s\n"
+"\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
+"Ä°nternet Bağlantısı BölĂŒĆŸdĂŒrmə vasitəsinə XoƟ Gəldiniz!\n"
+"\n"
+"%s\n"
+"\n"
+"QuraƟdırma sehirbazını açmaq ĂŒĂ§ĂŒn QuraƟdıra tıqlayın."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "("
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuring printer ..."
-msgstr "Çap Edicini Qur"
+msgid "Cuba"
+msgstr "Kuba"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Searching for new printers..."
msgstr "Yerli Çap Edici"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
-msgstr ""
+msgid "Belize"
+msgstr "Beliz"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
+msgid " (multi-session)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Bağlantınızı açılÄ±ĆŸda baƟlatmaq istəyirsiniz?"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "Çap edicini sınamaq istəyirsiniz?"
+#: ../../any.pm:1
+#, c-format
+msgid "Kernel Boot Timeout"
+msgstr "Çəkirdək AçılÄ±ĆŸÄ± Vaxt Dolması"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
+"Sizin kartınızın 3D sĂŒr'ətləndirmə dəstəyi ola bilər, amma sadecə olaraq "
+"XFree %s\n"
+"ilə dĂŒzgĂŒn iƟləyər.\n"
+"Sizin kartınıza XFree %s tərəfindən dəstək verilir ve bu 2D ĂŒĂ§ĂŒn daha yaxĆŸÄ± "
+"bir fikir olar."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr "Modeminizin hansı serial qapıya bağlı olduğunu seçiniz"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "DrakX bölmə sehirbazı bu yolu tapdı:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr ""
+msgid "Hungarian"
+msgstr "Macarca"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
msgstr ""
+"İnternet xidmət vericinizi seçin.\n"
+"Siyahıda deyilsə Siyahıda deyil'i seçin."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
+msgid "Automatic time synchronization (using NTP)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr "Siseminizdə Ɵəbəkə adapteri yoxdur!"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "8 MB"
+msgstr "8 MB"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "Siseminizdə Ɵəbəkə adapteri yoxdur!"
+msgid "LDAP Server"
+msgstr "Verici"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../services.pm:1
+#, c-format
msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "Siseminizdə Ɵəbəkə adapteri yoxdur!"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
+msgstr ""
+"PCMCIA dəstəyi, laptoplarda eternet və modem kimi avadanlıqların "
+"dəstəklənməsinə imkan verər.\n"
+"Qurulmadığı vaxtda açılÄ±ĆŸda iƟləməz, iƟləməsinə ehtiyac olmayan\n"
+"kompĂŒterlərdə qurulu olması problem yaratmaz."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, fuzzy, c-format
-msgid "and %d unknown printers"
-msgstr "Çap Edicisiz"
+msgid "Choose your country"
+msgstr "Klaviaturanızı seçin"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "and one unknown printer"
-msgstr "Çap Edicisiz"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"- System Files:\n"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Checking your system..."
-msgstr "Hansı çap edici sistemini istifadə etmək istəyirsiniz?"
+msgid "Standalone Tools"
+msgstr "Konsol Vasitələri"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Restarting CUPS..."
-msgstr "məhdudlaƟdır"
+msgid "Where"
+msgstr "Çərx"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr ""
+msgid "but not matching"
+msgstr "amma oxƟamır"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Examples for correct IPs:\n"
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Doğrudur?"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Server IP missing!"
-msgstr "Çap Edici Ev sahibi"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Configuring PCMCIA cards..."
+msgstr "PCMCIA kartlar qurulur..."
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr ""
+msgid "kdesu missing"
+msgstr "kdesu əksikdir"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
+msgid "Encryption key"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Uzaq CUPS vericisi"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected server"
-msgstr "Növbəni sil"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Edit selected server"
-msgstr "%s tapıldı"
+#: ../../lang.pm:1
+#, c-format
+msgid "Christmas Island"
+msgstr "Kristmas Adası"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Add server"
-msgstr "İstifadəçini əlavə et"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr "AçılÄ±ĆŸ yĂŒkləyicisi qurulumu iflas etdi. Xəta:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
+msgid "EIDE/SCSI channel"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "IP address of host/network:"
+msgid "Set this printer as the default"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
+msgid "partition %s"
+msgstr "bölmə %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr ""
+msgid "Paranoid"
+msgstr "ĆžĂŒbhəci"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "NIS"
+msgstr "NIS istifadə et"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Host/network IP address missing."
+msgid "<-- Del User"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
+msgid "Location on the bus"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Sharing of local printers"
+msgid "No printer found!"
msgstr "Yerli Çap Edici"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected host/network"
-msgstr "Növbəni sil"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Edit selected host/network"
+msgid "the vendor name of the device"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Add host/network"
-msgstr ""
+msgid "Erase entire disk"
+msgstr "BĂŒtĂŒn diski sil"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
+msgid " (Default)"
+msgstr " (Əsas)"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Automatic correction of CUPS configuration"
+msgid "Automatic reconfiguration"
msgstr "Qurulum Tərzi QuraƟdırılması"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
+msgid "Receiving Speed:"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Japanese text printing mode"
-msgstr "ƞəbəkəni qur"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "None"
-msgstr "Qurtardı"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Additional CUPS servers: "
-msgstr "CUPS verici IP"
+msgid "Turks and Caicos Islands"
+msgstr "TĂŒrk və Kaykos Adaları"
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "No remote machines"
-msgstr "Uzaq Çap Edici"
+msgid "permissions"
+msgstr "bölmə %s"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Custom configuration"
-msgstr "QuraƟdırma"
+#, c-format
+msgid "<- Previous"
+msgstr "<- Əvvəlki"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Çap Edici"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Internet Connection Sharing configuration"
+msgstr "Ä°nternet bağlantısı bölĂŒĆŸdĂŒrĂŒlməsi quraƟdırılması"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr ""
+msgid "Toggle between flat and group sorted"
+msgstr "Otaq və grup sıralaması arasında gəz"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr ""
+msgid "Themes"
+msgstr "ÖrtĂŒklər"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
+msgid "Options: %s"
+msgstr "Seçənəklər: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
+"AçılÄ±ĆŸ Ä°darəçisi olaraq hazırda %s iƟlədirsiniz.\n"
+"QuraƟdırma sehirbazını baƟlatmaq ĂŒĂ§ĂŒn tıqlayın."
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "CUPS printer configuration"
+msgid "OKI winprinter configuration"
msgstr "İnternet qurğuları"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
-msgstr ""
+msgid "Saint Helena"
+msgstr "MĂŒqəddəs Helena"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
+msgid "Security Level"
+msgstr "TəhlĂŒkəsizlik səviyyəsinin quraƟdırılması"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
msgid ""
+"Some steps are not completed.\n"
"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
msgstr ""
-"Uzaq CUPS vericiləri ĂŒĂ§ĂŒn heç bir quraƟdırmağa lĂŒzĂŒm yoxdur\n"
-"Buradakı hər çap edici avtomatik tapılacaqdır.\n"
-"Olmazsa \"Uzaq CUPS vericisi\" ni seçin."
+"Bə'zi bölmələr bitdi.\n"
+"\n"
+"Həqiqətən də çıxmaq istəyirsiniz?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "How is the printer connected?"
-msgstr "Çap ediciniz nə Ɵəkildə bağlıdır?"
+msgid "Sudan"
+msgstr "Sudan"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Select Printer Connection"
-msgstr "Çap Edici Bağlantısı Seçin"
+msgid "Polish (qwertz layout)"
+msgstr "Polyakca (QWERTZ sırası)"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Syria"
+msgstr "Surinam"
-#: ../../security/help.pm:1
+# NOTE: this message will be displayed at boot time; that is
+# only the ascii charset will be available on most machines
+# so use only 7bit for this message (and do transliteration or
+# leave it in English, as it is the best for your language)
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
#, c-format
msgid ""
-"Arguments: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
+"\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
"\n"
-"Set the user umask."
msgstr ""
+"%s emeliyyat sistemi secki proqramina xos gəlmissiniz!\n"
+"\n"
+"Içlerinden birini acmaq ucun adini yazin ve <ENTER>\n"
+"duymesine basin ve ya esas acilis ucun %d saniye gozleyin.\n"
+"\n"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (val)\n"
-"\n"
-"Set the shell timeout. A value of zero means no timeout."
-msgstr ""
+msgid "Portuguese"
+msgstr "Portuqalca"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (size)\n"
-"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
+msgid "Loopback file name: "
+msgstr "Loopback fayl adı: "
-#: ../../security/help.pm:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "IP ĂŒnvanı 1.2.3.4 Ɵəklində olmalıdır"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Serbia"
+msgstr "serial"
+
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
+msgid "Newzealand"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "if set to yes, check open ports."
-msgstr ""
+msgid "This directory should remain within the root filesystem"
+msgstr "Bu qovluq kök fayl sistemi içərisində olmalıdır"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
+msgid "CapsLock key"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr ""
+msgid "Install bootloader"
+msgstr "Sistem yĂŒkləyicini qur"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
+msgid "Select the memory size of your graphics card"
+msgstr "Ekran kartınızın yaddaƟ böyĂŒklĂŒyĂŒnĂŒ seçin"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, reports check result to tty."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
+msgid "Dynamic IP Address Pool:"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
+msgid "LVM name?"
+msgstr "LVM adı?"
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "if set to yes, run chkrootkit checks."
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
-msgstr ""
+msgid "Found %s %s interfaces"
+msgstr "%s %s ara ĂŒzĂŒ tapıldı"
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
+msgid "sticky-bit"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Post Install"
+msgstr "Qurulum"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The internal domain name"
+msgstr "Çap Edicisiz"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr ""
+msgid "Card IRQ"
+msgstr "Kart IRQ"
#: ../../security/help.pm:1
#, c-format
msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
+"Arguments: (umask)\n"
+"\n"
+"Set the user umask."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr ""
+msgid "logdrake"
+msgstr "logdrake"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
+msgid ""
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "if set to yes, report unowned files."
-msgstr ""
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "AçılÄ±ĆŸ disketi yaratmaq ĂŒĂ§ĂŒn istifadə ediləcək disket sĂŒrĂŒcĂŒyĂŒ seçin"
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the root umask."
-msgstr ""
+msgid "LILO with text menu"
+msgstr "Mətn menyulu LILO"
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
-"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+msgid "Everything (no firewall)"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
+msgid "You must specify a kernel image"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+msgid ", multi-function device on USB"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../interactive/newt.pm:1
+#, fuzzy, c-format
+msgid "Do"
+msgstr "Qurtardı"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "Əks ĂŒnvanına bağlantı qurulur"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
+msgid "Lithuanian AZERTY (old)"
+msgstr "Litvaniya dili AZERTY (köhnə)"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
-msgstr ""
+msgid "Brazilian (ABNT-2)"
+msgstr "Brazilya dili (ABNT-2)"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
+msgid "IP address of host/network:"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
+#, fuzzy, c-format
+msgid "System installation"
+msgstr "SILO Qurulumu"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
+msgid "Saint Vincent and the Grenadines"
+msgstr "MĂŒqəddəs Vinsent və Qrenadin"
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
-msgstr ""
+msgid "/File/_Open"
+msgstr "/Fayl/_Aç"
#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
-"Enable/Disable the logging of IPv4 strange packets."
+"The argument specifies if clients are authorized to connect\n"
+"to the X server on the tcp port 6000 or not."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Location of auto_install.cfg file"
+msgstr "Avtomatik qurulum disketi hazırlanır"
+
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
+msgid "Open Firmware Delay"
+msgstr "Firmware Gecikməsini Aç"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
-msgstr ""
+msgid "Hungary"
+msgstr "Macarıstan"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Total progess"
+msgstr "Qapıları sına"
+
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Color configuration"
+msgstr "QuraƟdırma"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
-msgstr ""
+msgid "New Zealand"
+msgstr "Yeni Zellandiya"
-#: ../../security/help.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "please choose the date to restore"
+msgstr "XahiƟ edirik siçanınızın növĂŒnĂŒ seçin."
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
+msgid "Switching from ext2 to ext3"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
+msgid "LPRng"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
-msgstr ""
+msgid "Netherlands Antilles"
+msgstr "Holland Antilləri"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"The argument specifies if clients are authorized to connect\n"
-"to the X server on the tcp port 6000 or not."
+msgid "Browse to new restore repository."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "and %d unknown printers"
+msgstr "Çap Edicisiz"
+
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
+msgid "No ISDN PCI card found. Please select one on the next screen."
+msgstr "Heç bir ISDN PCI kart tapılmaı. Sonrakı ekrandakılardan seçin."
-#: ../../security/help.pm:1
+#: ../../common.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
+msgid "GB"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
+msgid "Please give a user name"
+msgstr "XahiƟ edirik bir istifadəçi adı alın"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
+msgid "Enable CD Boot?"
+msgstr "CDdən AçılÄ±ĆŸÄ± FəallaƟdırım?"
-#: ../../security/help.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
+msgid " enter `void' for void entry"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
+msgid "on Hard Drive"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Winmodem connection"
+msgstr "Normal modem təsbiti"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
"\n"
-" Accept/Refuse broadcasted icmp echo."
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
msgstr ""
#: ../../security/help.pm:1
@@ -12183,740 +11806,541 @@ msgstr ""
msgid ""
"Arguments: (arg)\n"
"\n"
-"Accept/Refuse bogus IPv4 error messages."
+"Set the password history length to prevent password reuse."
msgstr ""
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Security Administrator (login or email)"
+msgid "Now, you can run xawtv (under X Window!) !\n"
msgstr ""
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Use libsafe for servers"
-msgstr "X verici ĂŒĂ§ĂŒn seçənəkləri göstərin"
-
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Security level"
-msgstr "TəhlĂŒkəsizlik səviyyəsinin quraƟdırılması"
-
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Please choose the desired security level"
-msgstr "TəhlĂŒkəsizlik səviyyəsini seçin"
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr "Qurulumu bitirmək ĂŒĂ§ĂŒn lazımi sahə yoxdur, xahiƟ edirik əlavə edin"
-#: ../../security/level.pm:1
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "DrakSec Basic Options"
-msgstr "Seçənəklər"
+msgid "%s on %s"
+msgstr "Qapı"
-#: ../../security/level.pm:1
-#, fuzzy, c-format
+#: ../../help.pm:1
+#, c-format
msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
msgstr ""
-"Biz dördĂŒncĂŒ səviyyə haqlarını verdik və sistem xarici bağlantılara qarĆŸÄ± "
-"tamamilə qapalıdır.\n"
-"TəhlĂŒkəsizlik səviyyəsi indi ən ĂŒstdədir."
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"Bu təhlĂŒkəsizlik səviyyəsiylə sistemin bir verici olaraq istifadəsi "
-"mĂŒmkĂŒndĂŒr. \n"
-"TəhlĂŒkəsizlik, birdən çox alıcının bağlanmasına icazə verəcək Ɵəkildə "
-"artırılmÄ±ĆŸdır. "
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Which is your timezone?"
+msgstr "Sisteminiz hansı məqsədlə istifadə ediləcək?"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
+msgid "Guinea"
+msgstr "Qvineya"
-#: ../../security/level.pm:1
+#: ../../network/tools.pm:1
#, fuzzy, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Ä°nternetə bağlı bir kompĂŒter ĂŒĂ§ĂŒn standart və tövsiyə edilən bir "
-"təhlĂŒkəsizlik səviyyəsidir."
+msgid "The system is now connected to the Internet."
+msgstr "İnternetə artıq bağlısınız"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "South Georgia and the South Sandwich Islands"
+msgstr "Cinubi Georgiya və Cənubi Sandviç Adası"
+
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
+msgid "Japan (broadcast)"
msgstr ""
-"Parollar fəallaƟdırıldı, yenə də bir Ɵəbəkə ĂŒstĂŒndə istifadə edilməməsi "
-"tövsiyə edilir."
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Bu səviyyə RAID'i diqqətli istifadənizi tövsiyə edirik. Sisteminiz daha "
-"asand\n"
-"iƟlədiləcək, ancaq xətalara qarĆŸÄ± da həssaiyyəti də artacaqdır. Ä°nternetə \n"
-"bağlı isəniz bunu tövsiyə etmirik. Parol ilə girilir."
+msgid "Mozambique"
+msgstr "Mozambiq"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Paranoid"
-msgstr "ĆžĂŒbhəci"
+msgid "Icon"
+msgstr "Timsal"
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Higher"
-msgstr "YĂŒksək"
+msgid "Please choose what you want to backup"
+msgstr "XahiƟ edirik qurmaq istədiyiniz paketləri seçin."
-#: ../../security/level.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "High"
-msgstr "YĂŒksək"
+msgid "256 colors (8 bits)"
+msgstr "256 rəng (8 bits)"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Poor"
-msgstr "Zəif"
+msgid "Read-write"
+msgstr "Oxu-yaz"
-#: ../../security/level.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Welcome To Crackers"
-msgstr "Krakerlərə xoƟgəlmiƟsiniz"
+msgid "Size: %s\n"
+msgstr "BöyĂŒklĂŒk: %s\n"
-#: ../../standalone/XFdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "\"%s\"a(ə) təkrar girin və dəyiƟiklikləri fəallaƟdırın"
+msgid "Hostname: "
+msgstr "Ev sahibi adı:"
-#: ../../standalone/XFdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "LĂŒtfen çıxın və Ctrl-Alt-BackSpace dĂŒymələrinə basın"
+msgid "Chunk size %s\n"
+msgstr "Parça böyĂŒklĂŒyĂŒ %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgid "Build the future of Linux!"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Local Printer"
+msgstr "Yerli Çap Edici"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
+msgid ""
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Etherboot ISO image is %s"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "No floppy drive available!"
-msgstr "Disket sĂŒrĂŒcĂŒ yoxdur"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Floppy can be removed now"
-msgstr ""
+msgid "ADSL connection"
+msgstr "Yerli ƞəbəkə quraƟdırılması"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Couldn't access the floppy!"
+msgid "No configuration, please click Wizard or Advanced.\n"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Please insert floppy disk:"
-msgstr "%s sĂŒrĂŒcĂŒsĂŒnə bir disket taxın"
+msgid "Error!"
+msgstr "Xəta"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "Write Config"
-msgstr "yenidən quraƟdır"
+msgid "cable connection detected"
+msgstr "Kabel bağlantısı"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Dynamic IP Address Pool:"
+msgid "Permission denied transferring %s to %s"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
+msgid "/_Report Bug"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "dhcpd Server Configuration"
-msgstr "Yerli ƞəbəkə QuraƟdırılması"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Resize"
+msgstr "BöyĂŒklĂŒyĂŒnĂŒ DəyiƟdir"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "IP Range End:"
-msgstr ""
+msgid "Dominica"
+msgstr "Dominik"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "IP Range Start:"
+msgid "Please enter the device name to use for backup"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Name Servers:"
-msgstr "NIS Verici"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Domain Name:"
-msgstr "Sahə(domain) adı"
-
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Broadcast Address:"
-msgstr ""
+msgid "Resolution: %s\n"
+msgstr "Rezolyusiya: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Subnet Mask:"
-msgstr ""
+msgid "matching"
+msgstr "oxƟayır"
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
#, c-format
-msgid "Routers:"
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Netmask:"
-msgstr "Netmask"
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"XahiƟ edirik doğru qapını seçin. Məsələn, MS Windowsdakı COM1'in qarĆŸÄ±lığı\n"
+"Linuksda ttyS0'dır."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Subnet:"
-msgstr ""
+msgid "The following packages are going to be removed"
+msgstr "AƟağıdakı paketlər sistemdən silinəcəklər"
-#: ../../standalone/drakTermServ:1
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
#, c-format
-msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
-msgstr ""
+msgid "Connect to the Internet"
+msgstr "İnternetə bağlan"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "dhcpd Config..."
-msgstr "QuraƟdırılır..."
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Use existing partitions"
+msgstr "Var olan bölmələri iƟlədimmi"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Delete Client"
-msgstr "DHCP Alıcısı"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Canadian (Quebec)"
+msgstr "Fransızca (Kanada/Quebec)"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "<-- Edit Client"
-msgstr "DHCP Alıcısı"
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Mouse device: %s\n"
+msgstr "Siçan avadanlığı: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Add Client -->"
+msgid "Reselect correct fonts"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Allow Thin Clients"
-msgstr "DHCP Alıcısı"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Thin Client"
-msgstr "DHCP Alıcısı"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"Options Description:\n"
+"\n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
+"\n"
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
-msgid "No net boot images created!"
+msgid ""
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "type: %s"
-msgstr "Növ: "
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "<-- Del User"
+msgid "We are now going to configure the %s connection."
msgstr ""
+"\n"
+"Bağlantınızı kəsə bilərsiniz. Ya da bağlantını yenidən də quraƟdıra "
+"bilərsiniz."
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, fuzzy, c-format
-msgid "Add User -->"
-msgstr "İstifadəçini əlavə et"
+msgid "MandrakeExpert Corporate"
+msgstr "Usta"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Delete All NBIs"
-msgstr "Fayl seç"
+msgid "Write protection"
+msgstr "Avtomatik təsbit iƟlət"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "<-- Delete"
-msgstr "Sil"
+msgid "You've not selected any font"
+msgstr "Növbəni sil"
-#: ../../standalone/drakTermServ:1
+#: ../../steps.pm:1
#, c-format
-msgid "This will take a few minutes."
-msgstr ""
+msgid "Language"
+msgstr "İƟlətdiyiniz dili seçin"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer model selection"
+msgstr "Çap Edici Bağlantısı"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Build All Kernels -->"
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
msgstr ""
+"%s bölməsinin növĂŒnĂŒ dəyiƟdirdikdən sonra, bu bölmədəki bĂŒtĂŒn mə'lumatlar "
+"silinəcəkdir"
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
#, fuzzy, c-format
-msgid "No NIC selected!"
-msgstr "Bağlı deyil"
+msgid "%d seconds"
+msgstr "%d saniyə sonra çıxılacaq"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Build Single NIC -->"
-msgstr ""
+msgid "Insert a blank floppy in drive %s"
+msgstr "%s sĂŒrĂŒcĂŒsĂŒnə boƟ bir disket yerləƟdirin"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No kernel selected!"
+msgid "A valid URI must be entered!"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Build Whole Kernel -->"
+msgid "Found \"%s\" interface do you want to use it ?"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Boot ISO"
+msgid "Re-configure interface and DHCP server"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Boot Floppy"
-msgstr ""
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid "Sound configuration"
+msgstr "Yerli ƞəbəkə QuraƟdırılması"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Photo test page"
+msgstr "Sınaq səhifəsi çap edilir..."
+
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
-"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
-"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
-"\n"
-msgstr ""
+msgid "Custom disk partitioning"
+msgstr "Hazırkı disk bölmələndirməsi"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+msgid "Enter Printer Name and Comments"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, c-format
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
+"The following printers\n"
"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
-msgstr ""
+"%s%s\n"
+"are directly connected to your system"
+msgstr "Siseminizdə Ɵəbəkə adapteri yoxdur!"
#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Add/Del Clients"
-msgstr "DHCP Alıcısı"
+msgid "type: %s"
+msgstr "Növ: "
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovakian (QWERTY)"
+msgstr "Slovakca (QWERTY)"
+
+#: ../../standalone/draksound:1
#, fuzzy, c-format
-msgid "Add/Del Users"
-msgstr "İstifadəçini əlavə et"
+msgid "No Sound Card detected!"
+msgstr "Bağlı deyil"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "Net Boot Images"
-msgstr ""
+msgid "Mouse Port"
+msgstr "Siçan Qapısı"
#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Etherboot Floppy/ISO"
+msgid ""
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Stop Server"
-msgstr "NIS Verici"
-
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Start Server"
+msgid "Ftp Server"
msgstr "NIS Verici"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Disable Server"
-msgstr "Databeyz"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Enable Server"
-msgstr "Databeyz"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "İnternet qurğuları"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Remove the last item"
-msgstr "Loopback faylı Ɵəkilləndirilir: %s"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Add an item"
-msgstr "İstifadəçi əlavə et"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Auto Install"
-msgstr "Qurulum"
-
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable msec hourly security check."
msgstr ""
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid "Congratulations!"
-msgstr "Təbriklər!"
-
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+msgid "%s fonts conversion"
msgstr ""
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Creating auto install floppy"
-msgstr "Avtomatik qurulum disketi hazırlanır"
+msgid "the type of bus on which the mouse is connected"
+msgstr "Siçanınızın bağlı olduğu serial Qapıyı seçin."
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
#, c-format
-msgid "manual"
-msgstr ""
+msgid "Uganda"
+msgstr "Uqanda"
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
+"Arguments: (size)\n"
+"\n"
+"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Qurulum Tərzi QuraƟdırılması"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "replay"
-msgstr "Təkrarla"
-
-#: ../../standalone/drakautoinst:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Auto Install Configurator"
-msgstr "Qurulum sonrası qurğular"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Error!"
-msgstr "Xəta"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
"\n"
-"Restore Backup Problems:\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
+"\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
+"\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
+"\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
+"\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
+"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
+"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
+"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
+msgid "Comoros"
+msgstr "Komor"
+
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
msgid ""
-"Description:\n"
"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
+"We are now going to configure the %s connection.\n"
"\n"
"\n"
+"Press OK to continue."
msgstr ""
+"\n"
+"Bağlantınızı kəsə bilərsiniz. Ya da bağlantını yenidən də quraƟdıra "
+"bilərsiniz."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+msgid "Yaboot mode"
+msgstr "Yaboot modu"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Sıravi 3 DĂŒyməli Siçan"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select another media to restore from"
+msgstr "XahiƟ edirik siçanınızın növĂŒnĂŒ seçin."
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Software Manager"
+msgstr "PaylaƟdırma adı"
+
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"restore description:\n"
+"Restore Description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
@@ -12928,4596 +12352,5209 @@ msgid ""
"\n"
" - Incremental Backups:\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
+" - Differential Backups:\n"
" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
+msgid "Re-submit"
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
+msgid "CD in place - continue."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Drakbackup"
+msgid "KB"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Restore"
-msgstr "Fayldan geri çağır"
+msgid "Network & Internet"
+msgstr "ƞəbəkə ara ĂŒzĂŒ"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Now"
-msgstr "Fayl sistemi qurğuları"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Litvanya dili \"Fonetik\" QWERTY"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Advanced Configuration"
-msgstr "Yerli ƞəbəkə QuraƟdırılması"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Net Boot Images"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Wizard Configuration"
-msgstr "Yerli ƞəbəkə QuraƟdırılması"
+msgid "Sharing of local scanners"
+msgstr "Yerli Çap Edici"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "View Backup Configuration."
-msgstr "ƞəbəkə quraƟdırılması"
+#: ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Now from configuration file"
-msgstr "ƞəbəkə quraƟdırılması"
+#: ../../services.pm:1
+#, c-format
+msgid "Services and deamons"
+msgstr "Xidmətlər və vasitələr"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Drakbackup Configuration"
-msgstr "ƞəbəkə quraƟdırılması"
+msgid "Remote host name missing!"
+msgstr "Uzaqdakı ev sahibi adı"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Total Progress"
+msgid "with /usr"
msgstr ""
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Sending files..."
-msgstr "Fayla qeyd et"
+msgid "Network"
+msgstr "ƞəbəkə ara ĂŒzĂŒ"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "files sending by FTP"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup other files"
-msgstr "Xətalı yedəkləmə faylı"
+#: ../../any.pm:1
+#, c-format
+msgid "This password is too simple"
+msgstr "Zəif parol seçdiniz!"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup user files"
-msgstr "Xətalı yedəkləmə faylı"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovakian (QWERTZ)"
+msgstr "Slovakca (QWERTZ)"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup system files"
-msgstr "Xətalı yedəkləmə faylı"
+#: ../../share/advertising/06-development.pl:1
+#, c-format
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Under Devel ... please wait."
+msgid "Truly minimal install (especially no urpmi)"
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+" Transfer \n"
+"Now"
msgstr ""
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Please select data to backup..."
-msgstr "XahiƟ edirik istifadə ĂŒĂ§ĂŒn bir dil seçin."
+msgid "Use daemon"
+msgstr "Ä°stifadəçi adı"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#, c-format
+msgid "Authentication"
+msgstr "Tanıtma"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Please select media for backup..."
-msgstr "XahiƟ edirik istifadə ĂŒĂ§ĂŒn bir dil seçin."
+msgid "Additional CUPS servers: "
+msgstr "CUPS verici IP"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Please select data to restore..."
-msgstr "XahiƟ edirik istifadə ĂŒĂ§ĂŒn bir dil seçin."
+msgid "Where do you want to mount %s?"
+msgstr "%s avadanlığını haraya bağlamaq istəyirsiniz?"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "AƟağıdakı paketlər qurulacaqdır"
+msgid "Restore Via Network"
+msgstr "Fayldan geri çağır"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Algeria"
+msgstr "Əlcəzair"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd-size"
+msgstr "Initrd böyĂŒklĂŒyĂŒ"
+
+#: ../../help.pm:1
#, c-format
msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
+msgid "\tBackups use tar and gzip\n"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Next"
-msgstr "Sonrakı ->"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "2 MB"
+msgstr "2 MB"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Previous"
-msgstr "<- Əvvəlki"
+#: ../../standalone.pm:1
+#, c-format
+msgid ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Save"
-msgstr "Hal:"
+msgid "Setting Default Printer..."
+msgstr "Yerli Çap Edici"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Build Backup"
-msgstr "Xətalı yedəkləmə faylı"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Interface %s (using module %s)"
+msgstr "Ara Üz %s (%s modulu iƟlədilir)"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Progress"
-msgstr "Fayldan geri çağır"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Name: %s\n"
+msgstr "Ad: %s\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Restore From Catalog"
-msgstr "Bölmə cədvəlini qurtar"
+msgid "Generating preview ..."
+msgstr "Avadanlıqlar tanınır..."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Browse to new restore repository."
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "CD in place - continue."
+msgid "serial"
+msgstr "serial"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "DVD-ROM"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Custom Restore"
-msgstr "XĂŒsusi"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Georgian (\"Latin\" layout)"
+msgstr "GĂŒrcĂŒ dili (\"Latın\" sırası)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Restore all backups"
+msgid "Get the best items with Mandrake Linux Strategic partners"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Failed..."
-msgstr "Fayldan geri çağır"
-
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Files Restored..."
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Path or Module required"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Kenya"
+msgstr "Kenya"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``Unmount'' first"
+msgstr "Əvvəlcə ``Ayır'-ı iƟlət"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Hostname required"
-msgstr "Ev sahibi adı:"
+msgid "Installing mtools packages..."
+msgstr "%s paketi qurulur"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Username required"
-msgstr "Ä°stifadəçi adı"
+msgid "You must specify a root partition"
+msgstr "Bir swap sahəsinə ehtiyacınız var"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Password required"
-msgstr "Parol"
+msgid "first step creation"
+msgstr "açılÄ±ĆŸ disketi yaradılması"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Host Path or Module"
+msgid "Both Shift keys simultaneously"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Host Name"
-msgstr "Ev sahibi adı"
+msgid "Select a scanner model"
+msgstr "Ekran kartınızı seçin"
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Restore Via Network Protocol: %s"
+msgid "LPRng - LPR New Generation"
msgstr ""
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Restore Via Network"
-msgstr "Fayldan geri çağır"
+msgid "Drakbackup Configuration"
+msgstr "ƞəbəkə quraƟdırılması"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr ""
+msgid "Save as.."
+msgstr "Fərqli qeyd et..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore From Tape"
-msgstr "Bölmə cədvəlini qurtar"
-
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
+msgid "Korea (North)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
-msgstr ""
+msgid "Autologin"
+msgstr "Avtomatik GiriƟ"
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
#, fuzzy, c-format
-msgid "Restore From CD"
-msgstr "Disketdən geri çağır"
+msgid "System configuration"
+msgstr "QuraƟdırma"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Backup files not found at %s."
+msgid "Domain Admin Password"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#: ../../share/advertising/05-desktop.pl:1
+#, c-format
msgid ""
-"Change\n"
-"Restore Path"
-msgstr "Fayldan geri çağır"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"Restore Selected\n"
-"Files"
-msgstr "Növbəni sil"
+msgid "Configuring printer ..."
+msgstr "Çap Edicini Qur"
-#: ../../standalone/drakbackup:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Remove user directories before restore."
-msgstr ""
+msgid "MB"
+msgstr "MB"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
+msgid "if set to yes, run some checks against the rpm database."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "select path to restore (instead of /)"
-msgstr "XahiƟ edirik siçanınızın növĂŒnĂŒ seçin."
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Other"
-msgstr "Fayldan geri çağır"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Users"
-msgstr "Fayldan geri çağır"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore system"
-msgstr "Sistemi qur"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Other Media"
-msgstr "Digər"
+#: ../../lang.pm:1
+#, c-format
+msgid "Virgin Islands (British)"
+msgstr "Virgin Adaları (Britaniya)"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Select another media to restore from"
-msgstr "XahiƟ edirik siçanınızın növĂŒnĂŒ seçin."
+#: ../../lang.pm:1
+#, c-format
+msgid "Bermuda"
+msgstr "Bermuda"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Please enter the directory where backups are stored"
+msgid "click here if you are sure."
msgstr ""
#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore from Hard Disk."
-msgstr "Disketdən geri çağır"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use quota for backup files."
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
+"No configuration file found \n"
+"please click Wizard or Advanced."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter the directory to save:"
-msgstr "XahiƟ edirik siçanınızı seçin"
-
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Use Hard Disk to backup"
-msgstr "Xətalı yedəkləmə faylı"
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"Yuxarıda sĂŒrĂŒcĂŒnĂŒzdə tapılan Linuks bölmələri sıralanıb\n"
+"Sehirbazın tövsiyələrinə uyun, onlar çox vaxt iƟə yarayır.\n"
+"Əgər bunu istəməsəniz en azından kök bölməsi (\"/\") seçməlisiniz\n"
+"Çox kiçik bölmə seçməyin. yoxsa çox proqram tə'minatı yĂŒkləyə bilməzsəniz.\n"
+"Əgər verilərinizi baƟqa bölmədə tutmaq istəyirsinizsə, ondabir de \"/home\" "
+"bölməsi də yaratmalısınız (birdən çox Linuks\n"
+"bölməniz var isə).\n"
+"\n"
+"\n"
+"Xəbəriniz olsun, hər bölmə aƟağıdakı kimi sıralanıb: \"Ad\", \"Həcm\".\n"
+"\n"
+"\n"
+"\"Ad\" belə kodlanıb: \"sĂŒrĂŒcĂŒ növĂŒ\", \"sĂŒrĂŒcĂŒ mömrəsi\",\n"
+"\"bölmə nömrəsi\" (məsələn \"hda1\").\n"
+"\n"
+"\n"
+"\"SĂŒrĂŒcĂŒ növĂŒ\" əgər sĂŒrĂŒcĂŒnĂŒz IDE sĂŒrĂŒcĂŒdĂŒrsə \"hd\"dirvə SCSI sĂŒrĂŒcĂŒ isə "
+"\"sd\"dir.\n"
+"\n"
+"\n"
+"\"SĂŒrĂŒcĂŒ nömrəsi\" həmiƟə \"hd\" və ya \"sd\"dən sonrakı rəqəmdir.IDE "
+"sĂŒrĂŒcĂŒlər ĂŒĂ§ĂŒn:\n"
+"\n"
+"*\"a\" yəni \"birinci IDE idarəcisində ali sĂŒrĂŒcĂŒ\",\n"
+"\n"
+"*\"b\" yəni \"birinci IDE idarəcisində kölə sĂŒrĂŒcĂŒ\",\n"
+"\n"
+"*\"c\" yəni \"ikinci IDE idarəcisində ali sĂŒrĂŒcĂŒ\",\n"
+"\n"
+"*\"d\" yəni \"ikinci IDE idarəcisində kölə sĂŒrĂŒcĂŒ\".\n"
+"\n"
+"\n"
+"SCSI sĂŒrĂŒcĂŒlərində \"a\" nın mənası \"birinci sĂŒrĂŒcĂŒ\",\n"
+"\"b\"nin mənası \"ikinci sĂŒrĂŒcĂŒ\"dĂŒr vs..."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, fuzzy, c-format
-msgid "please choose the date to restore"
-msgstr "XahiƟ edirik siçanınızın növĂŒnĂŒ seçin."
+msgid "Remove"
+msgstr "Uzaq Çap Edici"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup the system files before:"
-msgstr "Xətalı yedəkləmə faylı"
+#: ../../lang.pm:1
+#, c-format
+msgid "Lesotho"
+msgstr "Lesoto"
-#: ../../standalone/drakbackup:1
+#: ../../ugtk2.pm:1
#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
+msgid "utopia 25"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "OK to restore the other files."
+msgid "Pipe job into a command"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid " Restore Configuration "
-msgstr "ƞəbəkə quraƟdırılması"
-
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " Successfuly Restored on %s "
+msgid "new dynamic device name generated by core kernel devfs"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
#, c-format
-msgid " All of your selected data have been "
-msgstr ""
+msgid "Yes"
+msgstr "Bəli"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Backup files are corrupted"
-msgstr ""
+msgid "Cote d'Ivoire"
+msgstr "Kot Divuar"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "Which protocol do you want to use?"
+msgstr "Hansı protokolu istifadə etmək istəyirsiniz?"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Modeminizin hansı serial qapıya bağlı olduğunu seçiniz"
+msgid "Restore Progress"
+msgstr "Fayldan geri çağır"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"List of data corrupted:\n"
-"\n"
+msgid "Estonia"
+msgstr "Estoniya"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Choose the host on which the local scanners should be made available:"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
#, c-format
msgid ""
-"List of data to restore:\n"
-"\n"
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
msgstr ""
+"Bölmə cədvəlinizdə bir boƟluq var, amma o da iƟlədilə bilməz.\n"
+"Bu boƟluğu, birinci bölmənizi en yaxınındakı geniƟlədilmiƟ bölməyə "
+"daĆŸÄ±yaraq\n"
+"məsələni həll edə bilərsiniz."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Channel"
+msgstr "Ləğv et"
+
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
+msgid "Add"
+msgstr "Əlavə et"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "\t-Network by webdav.\n"
-msgstr ""
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "Ä°nternet Bağlantısı BölĂŒĆŸdĂŒrmə QuraƟdırması aparılmayıb."
#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid " Error while sending mail. \n"
+msgstr "%s faylı oxunurkan xəta oldu"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr ""
+msgid "Keyboard"
+msgstr "Klaviatura"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "\t-Network by SSH.\n"
+msgid ""
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "\t-Network by FTP.\n"
+msgid ""
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Choose the connection you want to configure"
+msgstr "İstifadə edəcəyiniz vasitəni seçin"
+
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Please wait, setting security level..."
+msgstr "TəhlĂŒkəsizlik səviyyəsinin quraƟdırılması"
+
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "\t-Tape \n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "\t-CDROM.\n"
-msgstr ""
+msgid "Configuring network device %s"
+msgstr "%s Ɵəbəkə avadanlığı qurulur"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "activated"
+msgstr "Fəal"
+
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Please choose which network interface will be used for the dhcp server."
+msgstr "Ä°nternetə bağlanmaq ĂŒĂ§ĂŒn Ɵəbəkə adapteri seçin."
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-Hard drive.\n"
-msgstr ""
+msgid "Finding packages to upgrade..."
+msgstr "GĂŒncəllənəcək paketlar tapılır"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
-msgstr ""
+msgid "Mount point: "
+msgstr "Bağlama nöqtəsi: "
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "\tBackups use tar and gzip\n"
+msgid "parse all fonts"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "\tBackups use tar and bzip2\n"
+msgid "With X"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "\tDo not include System Files\n"
-msgstr ""
+msgid "Multi-head configuration"
+msgstr "Çoxlu BaƟlıq quraƟdırılması"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Seçənəklər"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
+msgid "No browser available! Please install one"
+msgstr "Qurulumdan sonra istifadə edə biləcəyiniz baƟqa dillər seçə bilərsiniz"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
"\n"
-"- Save via %s on host: %s\n"
+"%s"
msgstr ""
+"Mövcud qurğuları saxlayım?\n"
+"Hal-hazırkı qurğular:\n"
+"\n"
+"%s"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "\t\tErase=%s"
-msgstr ""
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "32MB dən kiçik disk bölmələrində ReiserFS istifadə etməlisiniz"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"- Save to Tape on device: %s"
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
+"rwho protokolu, uzaq istifadəçilərin, rwho vasitəsi iƟlədən bir kompĂŒterdə\n"
+"olan bĂŒtĂŒn istifadəçiləri görmələrina imkan verər."
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid " (multi-session)"
-msgstr ""
+msgid "Domain name"
+msgstr "Sahə(domain) adı"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid " on device: %s"
-msgstr "Siçan avadanlığı: %s\n"
+msgid "Sharing of local printers"
+msgstr "Yerli Çap Edici"
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "RW"
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Available printers"
+msgstr "Yerli Çap Edici"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"- Burn to CD"
-msgstr ""
+msgid "Empty"
+msgstr "BoƟ"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
-"- Delete hard drive tar files after backup.\n"
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
+"\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
+"\n"
+"\n"
+"\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
+msgid "text width"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
+msgid "Where do you want to mount device %s?"
+msgstr "%s avadanlığını haraya bağlamaq istəyirsiniz?"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"\n"
-"- User Files:\n"
+msgid "The default lease (in seconds)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Interface \"%s\""
+msgstr "Ara ĂŒz %s"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"- System Files:\n"
+msgid "With basic documentation (recommended!)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
+#, c-format
+msgid "1 button"
+msgstr "1 dĂŒymə"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Backup Sources: \n"
+"There are %d unknown printers directly connected to your system"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid "Select user manually"
+msgid "Test"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Backup Users"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid direct root login."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Backup system"
-msgstr "Fayl sistemi qurğuları"
+msgid "Korea"
+msgstr "Daha Çox"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, fuzzy, c-format
-msgid "Please choose what you want to backup"
-msgstr "XahiƟ edirik qurmaq istədiyiniz paketləri seçin."
+msgid "Your choice? (default `%s'%s) "
+msgstr "Seçkiniz? (əsas %s) "
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Raw printer"
+msgstr "Çap Edicisiz"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "on Tape Device"
+msgid "official vendor name of the cpu"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Vendor"
+msgstr "Geri al"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid "on CDROM"
-msgstr ""
+msgid "Interface %s"
+msgstr "Ara ĂŒz %s"
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "across Network"
-msgstr ""
+msgid "Configure mouse"
+msgstr "Siçan qurğuları"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "on Hard Drive"
-msgstr ""
+msgid "Choose the mount points"
+msgstr "Bağlama nöqtələrini seçin"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please choose where you want to backup"
-msgstr "XahiƟ edirik qurmaq istədiyiniz paketləri seçin."
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "OK"
+msgstr "Oldu"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "More Options"
-msgstr "Modul seçənəkləri:"
+msgid "Yugoslavian (latin)"
+msgstr "Yugoslavca (latın/kiril)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Installing"
+msgstr "Qurulur"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Launch userdrake"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "When"
-msgstr "Çərx"
+msgid "Is this an install or an upgrade?"
+msgstr "Bu bir qurulum mu, yoxsa gĂŒncəlləməmidir?"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Where"
-msgstr "Çərx"
+msgid "ISDN card"
+msgstr "Daxili ISDN kart"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "What"
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
+msgid ""
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
+"\n"
msgstr ""
+"Təbrik edirik, internet və Ɵəbəkə quraƟdırılması qurtardı.\n"
+"\n"
+"Qurğular indi sisteminizə əlavə ediləcək.\n"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Send mail report after each backup to:"
+msgid "\t-Hard drive.\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
"\n"
-"Note that currently all 'net' medias also use the hard drive."
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "XahiƟ edirik istifadə ĂŒĂ§ĂŒn bir dil seçin."
+msgid "Printer on remote CUPS server"
+msgstr "Uzaq CUPS vericisi"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "XahiƟ edirik qurmaq istədiyiniz paketləri seçin."
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Use daemon"
-msgstr "Ä°stifadəçi adı"
+msgid "delete"
+msgstr "Sil"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "monthly"
+msgid "here if no."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "DHCP host name"
+msgstr "Ev sahibi adı"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid "weekly"
+msgid "The maximum lease (in seconds)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "daily"
-msgstr ""
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "Siçanınızın bağlı olduğu serial Qapıyı seçin."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "hourly"
+msgid "Did it work properly?"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
#, c-format
-msgid "HardDrive / NFS"
-msgstr ""
+msgid "Poor"
+msgstr "Zəif"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "CDROM / DVDROM"
+msgid "The DHCP start range"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter the directory to save to:"
-msgstr "XahiƟ edirik siçanınızı seçin"
+#: ../../lang.pm:1
+#, c-format
+msgid "Grenada"
+msgstr "Qrenada"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr "XahiƟ edirik qurmaq istədiyiniz paketləri seçin."
+#: ../../any.pm:1
+#, c-format
+msgid "Unsafe"
+msgstr "E'tibarsız"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr "XahiƟ edirik qurmaq istədiyiniz paketləri seçin."
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid ", %s sectors"
+msgstr ", %s sektor"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "XahiƟ edirik qurmaq istədiyiniz paketləri seçin."
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "No"
+msgstr "Xeyr"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please enter the device name to use for backup"
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use tape to backup"
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "No CD device defined!"
-msgstr "Fayl seç"
+#: ../../lang.pm:1
+#, c-format
+msgid "Guadeloupe"
+msgstr "Quadelup"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
+msgid "could not find any font.\n"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "XahiƟ edirik bir bölmə ĂŒstĂŒnə tıqlayın"
+#: ../../standalone/keyboarddrake:1
+#, c-format
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "Konsolda BackSpace'in Silmə funksyasını görməyini istəyirmisiniz?"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "XahiƟ edirik bir bölmə ĂŒstĂŒnə tıqlayın"
+#: ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Vertical refresh rate"
+msgstr "ƞaquli yeniləmə sĂŒr'əti"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
#, c-format
-msgid " Erase Now "
-msgstr ""
+msgid "Entering step `%s'\n"
+msgstr "BaƟlanğıc addımı `%s'\n"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "XahiƟ edirik bir bölmə ĂŒstĂŒnə tıqlayın"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "XahiƟ edirik bir bölmə ĂŒstĂŒnə tıqlayın"
+msgid "Removing %s ..."
+msgstr "Rezolyusiya: %s\n"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check for multisession CD"
-msgstr "XahiƟ edirik bir bölmə ĂŒstĂŒnə tıqlayın"
+#: ../../lang.pm:1
+#, c-format
+msgid "Niger"
+msgstr "Niger"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No printer"
+msgstr "Çap Edicisiz"
+
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "Klaviatura quruluƟunu seçiniz."
+msgid "alert configuration"
+msgstr "QuraƟdırma"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
+msgid "NetWare Printer Options"
+msgstr "NetWare Çap Edici Qurğuları"
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "%s BootSplash (%s) preview"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Use CD/DVDROM to backup"
+msgid "General"
+msgstr "Ümumi"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing system: "
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Need hostname, username and password!"
+msgid "Add a user"
+msgstr "İstifadəçi əlavə et"
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Network configuration (%d adapters)"
+msgstr "ƞəbəkə quraƟdırılması (%d adapter)"
+
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#, c-format
+msgid "Mandatory package %s is missing"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Remember this password"
-msgstr "Parolsuz"
+#: ../../lang.pm:1
+#, c-format
+msgid "Philippines"
+msgstr "Filippin"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter your password"
-msgstr "XahiƟ edirik təkrar sınayın"
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#, c-format
+msgid "Ok"
+msgstr "Oldu"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter your login"
-msgstr "XahiƟ edirik təkrar sınayın"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Print Queue Name"
+msgstr "Çap Edici Növbə Adı"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "aboot istifadə etmək istəyirsiniz?"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "Belarusca"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Please enter the host name or IP."
-msgstr "XahiƟ edirik siçanınızı seçin"
+msgid "Move files to the new partition"
+msgstr "Yeni bölmələr ĂŒĂ§ĂŒn boƟ sahə yoxdur"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
msgstr ""
#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore From Catalog"
+msgstr "Bölmə cədvəlini qurtar"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-" Transfer \n"
-"Now"
-msgstr ""
+msgid "Pitcairn"
+msgstr "Pitkairn"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
-msgstr ""
+msgid "IDE"
+msgstr "IDE"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "group :"
+msgstr "İƟ qrupu"
+
+#: ../../fs.pm:1
#, c-format
-msgid "Use Expect for SSH"
+msgid "mounting partition %s in directory %s failed"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Net Method:"
+msgid "Lilo screen"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use network connection to backup"
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Users"
-msgstr "Ä°stifadəçi adı"
+#: ../../bootloader.pm:1 ../../help.pm:1
+#, c-format
+msgid "LILO with graphical menu"
+msgstr "Qrafiki menyulu LILO"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Windows (FAT32)"
-msgstr "\"Windows\"u sil"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Estimating"
+msgstr "Təxmini olaraq hesaplanır"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr ""
+msgid "You can't unselect this package. It is already installed"
+msgstr "Bu paketi sistemdən çıxarda bilməzsınız. Artıq qurulmuƟdur."
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Remove Selected"
-msgstr "Növbəni sil"
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "SMB/Windows 95/98/NT"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do not include the browser cache"
-msgstr ""
+msgid "Go on anyway?"
+msgstr "Yenə də davam edək?"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "XahiƟ edirik qurmaq istədiyiniz paketləri seçin."
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "Mövcud olan paketlər axtarılır."
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
+msgid "Does not appear to be recordable media!"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
+msgid "Specify options"
+msgstr "Seçənəkləri göstər"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use incremental backup (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Xətalı yedəkləmə faylı"
+msgid "Vanuatu"
+msgstr "Vanuatu"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
+msgid "Either the server name or the server's IP must be given!"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
"\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
msgstr ""
+"XĂŒsusi bir açılÄ±ĆŸ disketi, Linuks sisteminizin normal bir sistem yĂŒkləyiciyə "
+"lĂŒzĂŒm\n"
+"olmadan açılmasına imkan verər. Əgə sisteminizə lilo (ya da grub) "
+"qurmayacaqsanız,\n"
+"ya da baƟqa bir əməliyyat sistemi liloyu silərsa ya da lilo "
+"avadanlığınızlaiƟləməzsə\n"
+"bu disket sizə yardımçi olacaqdır. Sonradan Mandrake qurtarma disketi "
+"rəsmini\n"
+"istifadə edərək də bu disket yaradıla bilər.\n"
+"AçılÄ±ĆŸ disketi yaratmaq istəyirsiniz?\n"
+"AçılÄ±ĆŸ disketi yaratmaq istəyirsinizsə, birinci disket sĂŒrĂŒcĂŒyə disket "
+"yerləƟdirin\n"
+"və \"OLDU\" basın."
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
+msgid "You can't use an encrypted file system for mount point %s"
+msgstr "%s ĂŒĂ§ĂŒn LVM Məntiqi Cildini istifadə edə bilməzsiniz"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
+msgid "Norfolk Island"
+msgstr "Norfolk Adaları"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../standalone/drakboot:1
#, fuzzy, c-format
-msgid "File Selection"
-msgstr "Paket Qrup Seçkisi"
+msgid "Theme installation failed!"
+msgstr "QuruluƟ sinifini seçin"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Can't create catalog!"
+msgid "Nothing to do"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid " Error while sending mail. \n"
-msgstr "%s faylı oxunurkan xəta oldu"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Use for loopback"
+msgstr "Loopback ĂŒĂ§ĂŒn istifadə et"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
+msgid "use pppoe"
+msgstr "pppoe istifadə et"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Moving files to the new partition"
+msgstr "Yeni bölmələr ĂŒĂ§ĂŒn boƟ sahə yoxdur"
+
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "SINAQ MƏRHƏLƏSÄ°NDƏKÄ° 3D sĂŒr'ətləndirmə dəstəkli XFree %s"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1
#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
+msgid "Advanced"
+msgstr "Ətraflı"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"file list sent by FTP: %s\n"
-" "
+msgid "Transfer"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "No changes to backup!"
-msgstr "Xətalı yedəkləmə faylı"
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak (US)"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Xətalı yedəkləmə faylı"
+msgid "More Options"
+msgstr "Modul seçənəkləri:"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Other files..."
-msgstr "Xətalı yedəkləmə faylı"
+#: ../../lang.pm:1
+#, c-format
+msgid "Afghanistan"
+msgstr "Əfqanıstan"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hard Disk Backup Progress..."
+msgid "Delete Hard Drive tar files after backup to other media."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup User files..."
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Backup system files..."
+msgid ""
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
msgstr ""
+"cron, istifadəçilərə xĂŒsusi əmrləri periodik olaraq iƟə sala bilən\n"
+"standart bir UNIX proqramıdır. vixie cron, standart cron'a əlavə edilmiƟ bir "
+"çox\n"
+"yeni xĂŒsusiyyət daxildir."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "No tape in %s!"
-msgstr ""
+msgid "Burundi"
+msgstr "Burundi"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Permission problem accessing CD."
+msgid "Add Client -->"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "This may take a moment to erase the media."
-msgstr ""
+msgid "Read carefully!"
+msgstr "Diqqətlə Oxuyun!"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Not erasable media!"
+msgid "RW"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Does not appear to be recordable media!"
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "No CDR/DVDR in drive!"
-msgstr ""
+msgid "Port"
+msgstr "Qapı"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "WebDAV transfer failed!"
+msgid "No (experts only)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "WebDAV remote site already in sync!"
+msgid "No kernel selected!"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Total progess"
-msgstr "Qapıları sına"
-
-#: ../../standalone/drakbackup:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
-"\n"
-"without being prompted for a password."
-msgstr ""
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Sistemi secili emeliyyat sistemiyle acmaq ucun entere,"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "%s not responding"
+msgid "Set-GID"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Can't find %s on %s"
-msgstr "%s açıla bilmir: %s\n"
+msgid "The encryption keys do not match"
+msgstr "Parollar uyğun gəlmir"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Permission denied transferring %s to %s"
+msgid "Right \"Windows\" key"
msgstr ""
#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Bad password on %s"
-msgstr "Parolsuz"
-
-#: ../../standalone/drakbackup:1
#, c-format
-msgid "No password prompt on %s at port %s"
+msgid "CDROM / DVDROM"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "ERROR: Cannot spawn %s."
+msgid "if set to yes, check empty password in /etc/shadow."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
-msgid "This may take a moment to generate the keys."
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"%s exists, delete?\n"
+"Here is a list of the available printing options for the current printer:\n"
"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
+msgid "Resolutions"
+msgstr "Rezolyusiyalar"
+
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
msgid ""
+"drakfirewall configurator\n"
"\n"
-" DrakBackup Report Details\n"
-"\n"
-"\n"
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
msgstr ""
+"tinyfirewall configurator\n"
+"\n"
+"Bu, Linuks Mandrake sisteminiz ĂŒĂ§ĂŒn Ɵəxsi bir firewall quraƟdıracaqdır.\n"
+"Daha gĂŒclĂŒ və e'tibarlı sistem ĂŒĂ§ĂŒn xahiƟ edirik xĂŒsusi MandrakeSecurity "
+"Firewall\n"
+"buraxılÄ±ĆŸÄ±nı tədqiq edin."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"Please enter your username, password and domain name to access this host."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Remove selected host"
+msgstr "Növbəni sil"
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
+msgid "Network configuration"
+msgstr "ƞəbəkə quraƟdırılması"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "No sharing"
+msgstr "CUPS baƟlayır"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule down one level"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "INFO"
+msgid "TB"
msgstr ""
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
+msgid "Please check if you are using a DVDR device"
+msgstr "XahiƟ edirik bir bölmə ĂŒstĂŒnə tıqlayın"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid "FATAL"
msgstr "FAT"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "WARNING"
+msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
+"\n"
+"The network address is %s using a netmask of %s.\n"
+"\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cron not available yet as non-root"
-msgstr ""
+msgid "Delete"
+msgstr "Sil"
-#: ../../standalone/drakboot:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "%s qurulumu iflas etdi. Olan xəta:"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid reboot by the console user."
+msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "No, I don't want autologin"
-msgstr "Xeyr, Avtomatik giriƟ istəmirəm"
+msgid ""
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
+msgstr ""
+"KompĂŒterinizi avtomatik olaraq X ilə açılması ĂŒĂ§ĂŒn qura bilərəm.\n"
+"AçılÄ±ĆŸda X Window ilə baƟlamaq istəyirsiniz?"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-"Bəli, bu istifadəçi ĂŒĂ§ĂŒn avtomatik giriƟ istəyirəm (istifadəçi, masa ĂŒstĂŒ)"
+msgid "Build the disk"
+msgstr "Diski yarat"
-#: ../../standalone/drakboot:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnect %s"
+msgstr "Bağlantını kəs"
+
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "AçılÄ±ĆŸda X-Window sistemini baƟlat"
+msgid "Status:"
+msgstr "Hal:"
-#: ../../standalone/drakboot:1
+#: ../../network/network.pm:1
#, c-format
-msgid "System mode"
-msgstr "Sistem modu"
+msgid "HTTP proxy"
+msgstr "HTTP vəkil verici"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "SSH Server"
+msgstr "NIS Verici"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bootsplash"
+msgid "\t-Network by rsync.\n"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "European protocol"
+msgstr "AçılÄ±ĆŸ Protokolu"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lilo screen"
+msgid ", printer \"%s\" on server \"%s\""
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
#, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
+msgid "Error"
+msgstr "Xəta"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Themes"
-msgstr "ÖrtĂŒklər"
+msgid "allow \"su\""
+msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, fuzzy, c-format
-msgid "Splash selection"
-msgstr "Paket seçkilərini saxla"
+msgid "Australia"
+msgstr "serial"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
+msgid "please wait during ttmkfdir..."
msgstr ""
-"AçılÄ±ĆŸ Ä°darəçisi olaraq hazırda %s iƟlədirsiniz.\n"
-"QuraƟdırma sehirbazını baƟlatmaq ĂŒĂ§ĂŒn tıqlayın."
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr ""
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid "Configure only card \"%s\"%s"
+msgstr "Təkcə \"%s\" kartını qur (%s)"
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Theme installation failed!"
-msgstr "QuruluƟ sinifini seçin"
+msgid "Level"
+msgstr "səviyyə"
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Notice"
-msgstr "NoVÄ°deo"
+msgid "Change the printing system"
+msgstr "ƞəbəkəni qur"
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "Relaunch 'lilo'"
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid ""
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
msgstr ""
+"Sizin sisteminiz çoxlu baƟlıq quraƟdırmasını dəstəkləyir.\n"
+"Nə etmək istəyirsiniz?"
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
-msgstr ""
+msgid "Configure services"
+msgstr "Xidmətləri qur"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+msgid "Broadcast Address:"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr ""
+msgid "mount failed: "
+msgstr "bağlama iflas etdi: "
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
msgstr ""
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid "Write %s"
-msgstr "XFree %s"
-
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr ""
+msgid "Image"
+msgstr "Əks"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lilo message not found"
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
msgstr ""
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "Copy %s to %s"
-msgstr ""
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Remote Administration"
+msgstr "Uzaq Çap Edici (lpd) Seçənəkləri"
-#: ../../standalone/drakboot:1
+#: ../../modules.pm:1
#, c-format
-msgid "Backup %s to %s.old"
+msgid ""
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Create new theme"
-msgstr "Yeni bölmə yarat"
+msgid "Selected All"
+msgstr "Fayl seç"
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Display theme\n"
-"under console"
+msgid "CUPS - Common Unix Printing System"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Install themes"
-msgstr "Sistemi qur"
+msgid "Webmin Service"
+msgstr "avadanlıq"
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub modu"
+msgid "device"
+msgstr "avadanlıq"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Yaboot mode"
-msgstr "Yaboot modu"
+msgid "All"
+msgstr "Hamısı"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "Hansı çap edici sistemini istifadə etmək istəyirsiniz?"
+
+#: ../../crypto.pm:1 ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Greece"
+msgstr "Yunanca"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
+msgid "An error occurred"
+msgstr "Bir xəta oldu"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "/File/_Quit"
-msgstr "/Fayl/_Çıx"
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
+msgstr ""
+"Bu paket yenilənməlidir\n"
+"Sistemdən çıxarmaq mövzusunda ciddisiniz?"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Tamil (Typewriter-layout)"
+msgstr "Ermenicə (yazı maĆŸÄ±nı)"
+
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "/_File"
-msgstr "/_Fayl"
+msgid "manual"
+msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Boot Style Configuration"
-msgstr "Qurulum Tərzi QuraƟdırılması"
+msgid "Printer manufacturer, model, driver"
+msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
-msgid "No browser available! Please install one"
-msgstr "Qurulumdan sonra istifadə edə biləcəyiniz baƟqa dillər seçə bilərsiniz"
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"%s avadanlığında medya yoxdur.\n"
+"XahiƟ edirik. birini taxın."
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "connecting to Bugzilla wizard ..."
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Package not installed"
-msgstr "Qurulumdan çıx"
+msgid "Printer on NetWare server"
+msgstr "Çap Edici Vericisi"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
+#, c-format
+msgid "Give the ram size in MB"
+msgstr "YaddaƟ miqdarını Mb cinsindən verin"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Real name"
+msgstr "Həqiqi adı"
+
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Not installed"
-msgstr "Qurulumdan çıx"
+msgid "done"
+msgstr "Qurtardı"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Standalone Tools"
-msgstr "Konsol Vasitələri"
+msgid "Please uncheck or remove it on next time."
+msgstr "Modeminizin hansı serial qapıya bağlı olduğunu seçiniz"
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Report"
-msgstr "Qapı"
+msgid "Higher"
+msgstr "YĂŒksək"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the partitions you want to format"
+msgstr "ƞəkilləndiriləcək disk bölmələrini seçin"
+
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
+"\n"
"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Release: "
-msgstr "XahiƟ edirik gözləyin"
+msgid "Can't find %s on %s"
+msgstr "%s açıla bilmir: %s\n"
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Kernel:"
-msgstr ""
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Package: "
-msgstr "Paket Qrup Seçkisi"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Application:"
-msgstr "Tanıtma"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Configuration Wizards"
-msgstr "ƞəbəkə QuraƟdırılması Sehirbazı"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Userdrake"
-msgstr "Çap Edici"
+msgid "Japanese 106 keys"
+msgstr "Yaponca 106 dĂŒyməli"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Windows Migration tool"
+msgid "This will take a few minutes."
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Urpmi"
+msgid "Burkina Faso"
+msgstr "Burkina Faso"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Use scanners on remote computers"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Software Manager"
-msgstr "PaylaƟdırma adı"
+msgid "Delete selected rule"
+msgstr "Növbəni sil"
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Remote Control"
-msgstr "Uzaq Çap Edici"
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Uzaq CUPS vericisi"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Msec"
-msgstr "Siçan"
+msgid "Insert a floppy in %s"
+msgstr "%s sĂŒrĂŒcĂŒsĂŒnə bir disket taxın"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Menudrake"
-msgstr "Usta"
+#: ../../lang.pm:1
+#, c-format
+msgid "Maldives"
+msgstr "Maldiv"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Mandrake Online"
-msgstr "İdarə Mərkəzi"
+#: ../../any.pm:1
+#, c-format
+msgid "compact"
+msgstr "bəsit"
-#: ../../standalone/drakbug:1
+#: ../../common.pm:1
#, c-format
-msgid "HardDrake"
+msgid "1 minute"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "on channel %d id %d\n"
+msgstr "%d data yolunda, %d nö'li\n"
+
+#: ../../printer/main.pm:1
#, c-format
-msgid "Synchronization tool"
+msgid ", multi-function device"
msgstr ""
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "First Time Wizard"
-msgstr "Ä°lk Dəfə Sehirbazına XoƟ Gəldiniz"
+#: ../../lang.pm:1
+#, c-format
+msgid "Laos"
+msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../install_interactive.pm:1
#, fuzzy, c-format
-msgid "Mandrake Control Center"
-msgstr "İdarə Mərkəzi"
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr "FAT bölməsi yoxdur ya da loopback ĂŒĂ§ĂŒn lazımi yer buraxılmayıb"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Mandrake Bug Report Tool"
+msgid "Up"
msgstr ""
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Parameters"
-msgstr "Parametrlər"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Firewall"
+msgstr "Verici, Firewall/Ruter"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Internet Connection Configuration"
-msgstr "Ä°nternet Bağlantısı QuraƟdırılması"
+msgid "Area:"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "DHCP Client"
-msgstr "DHCP Alıcısı"
+msgid "(E)IDE/ATA controllers"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ethernet Card"
-msgstr "Eternet Kartı"
+msgid "Printer Server"
+msgstr "Çap Edici Vericisi"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Gateway"
-msgstr "Keçit"
+msgid "Disconnection from the Internet complete."
+msgstr ""
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
-#, c-format
-msgid "Connection type: "
-msgstr "Bağlantı növĂŒ:"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Custom configuration"
+msgstr "QuraƟdırma"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Profile: "
-msgstr "Profil: "
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet connection configuration"
-msgstr "Ä°nternet bağlantısı quraƟdırılması"
+msgid "Saint Pierre and Miquelon"
+msgstr "MĂŒqəddəs Pyer və Migelion"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
msgstr ""
-"Heç Ä°nternet bağlantınız yoxdur.\n"
-"Əvvəlcə onları 'QuraƟdır'a basaraq qurun"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
+msgid "saving Bootsplash theme..."
msgstr ""
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "activate now"
-msgstr "Fəal"
+#: ../../lang.pm:1
+#, c-format
+msgid "Portugal"
+msgstr "Portuqaliya"
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "Do you have another one?"
+msgstr "BaƟqa var?"
+
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "deactivate now"
-msgstr "Fəal"
+msgid ", printing to %s"
+msgstr "%s faylına yazarkən xəta oldu"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "DHCP client"
-msgstr "DHCP alıcısı"
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Assign host name from DHCP address"
+msgstr "XahiƟ edirik siçanınızı seçin"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Started on boot"
-msgstr "AçılÄ±ĆŸda baƟladılır"
+msgid "Toggle to normal mode"
+msgstr "Normal moda keç"
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Boot Protocol"
-msgstr "AçılÄ±ĆŸ Protokolu"
+msgid "Generic"
+msgstr "Ümumi"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "%s Adapteri: %s"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Cylinder %d to %d\n"
+msgstr "Silindr %d -dən silindr %d-yə\n"
#: ../../standalone/drakconnect:1
#, c-format
-msgid "LAN Configuration"
-msgstr "Yerli ƞəbəkə QuraƟdırılması"
+msgid "New profile..."
+msgstr "Yeni profil..."
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LAN configuration"
-msgstr "Yerli ƞəbəkə quraƟdırılması"
+msgid "Which disk do you want to move it to?"
+msgstr "Hansı diskə daĆŸÄ±maq istəyirsiniz?"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
+msgid "Display logo on Console"
msgstr ""
-"Qurulu ara ĂŒzĂŒnĂŒz yoxdure.\n"
-"Əvvəlcə onları 'QuraƟdır'a basaraq qurun"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Connect..."
-msgstr "Bağlan..."
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Windows Domain"
+msgstr "NIS sahəsi"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Disconnect..."
-msgstr "Bağlantını Kəs..."
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Interface %s (on network %s)"
+msgstr "Ara Üz %s (%s modulu iƟlədilir)"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Not connected"
-msgstr "Bağlı deyil"
+msgid "INFO"
+msgstr ""
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
-#, c-format
-msgid "Connected"
-msgstr "Bağlandı"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Wallis and Futuna"
+msgstr "Vallis və Futuna Adaları"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
+msgid "Need to create /etc/dhcpd.conf first!"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Interface:"
-msgstr "Ara ĂŒz"
+msgid "Is FPU present"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Gateway:"
-msgstr "Keçit:"
+msgid "There are no scanners found which are available on your system.\n"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../services.pm:1
#, c-format
-msgid "Apply"
-msgstr "Əlavə Et"
+msgid ""
+"No additional information\n"
+"about this service, sorry."
+msgstr ""
+"Bu xidmət haqqında təəsĂŒf ki,\n"
+"əlavə mə'lumat yoxdur."
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Click here to launch the wizard ->"
+msgid "Build Single NIC -->"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Wizard..."
-msgstr "Sehirbaz..."
+msgid "Is this correct?"
+msgstr "Doğrudur?"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Status:"
-msgstr "Hal:"
+msgid "Marshall Islands"
+msgstr "MarƟal Adaları"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Windows (FAT32)"
+msgstr "\"Windows\"u sil"
+
+#: ../../steps.pm:1
#, c-format
-msgid "Type:"
-msgstr "Növ: "
+msgid "Root password"
+msgstr "Root parolunu qur"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Internet access"
-msgstr "İnternet imkanı"
+msgid "Build All Kernels -->"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Hostname: "
-msgstr "Ev sahibi adı:"
+msgid "if set to yes, report unowned files."
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Yerli ƞəbəkəni QuraƟdır..."
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"Bir swap sahəniz yoxdur\n"
+"Davam edim?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "State"
-msgstr "Hal:"
+msgid "Server IP missing!"
+msgstr "Çap Edici Ev sahibi"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Driver"
-msgstr "SĂŒrĂŒcĂŒ"
+msgid "Suriname"
+msgstr "Surinam"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Protocol"
-msgstr "Protokol"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Enable ACPI"
+msgstr "CDdən AçılÄ±ĆŸÄ± FəallaƟdırım?"
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "Interface"
-msgstr "Ara ĂŒz"
+msgid "Graphical Environment"
+msgstr "Qrafiki Ara Üz"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configure Internet Access..."
-msgstr "İnternet keçiƟini Qur..."
+msgid "Gibraltar"
+msgstr "Gibraltar"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Wait please"
+msgid "on Tape Device"
msgstr ""
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
+#: ../../network/modem.pm:1
+#, fuzzy, c-format
+msgid "Do nothing"
+msgstr "amma oxƟamır"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "New profile..."
-msgstr "Yeni profil..."
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Delete Client"
+msgstr "DHCP Alıcısı"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Profile to delete:"
-msgstr "Silinəcək profil:"
+msgid "Filesystem type: "
+msgstr "Fayl sistemi növĂŒ: "
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Del profile..."
-msgstr "Profili sil..."
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Starting network..."
+msgstr "Bağlantınız baƟladılır..."
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "ƞəbəkə quraƟdırılması (%d adapter)"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Vietnam"
+msgstr "Vyetnam"
-#: ../../standalone/drakedm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/_Fields description"
+msgstr "Ä°zah"
+
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
+msgid "Optimize your security by using Mandrake Linux"
msgstr ""
-#: ../../standalone/drakedm:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Choosing a display manager"
-msgstr ""
+msgid "Help"
+msgstr "Yardım"
-#: ../../standalone/drakfloppy:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
-msgstr ""
-"DĂŒzgĂŒn mkbootdisk aparıla bilmir: \n"
-" %s \n"
-" %s"
+msgid "Your personal phone number"
+msgstr "Sizin Ɵəxsi telefon nömrəniz"
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Unable to fork: %s"
-msgstr "Fork edilə bilmir: %s"
+msgid "Which size do you want to keep for Windows on"
+msgstr "Hansı sektora daĆŸÄ±maq istəyirsiniz?"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
msgstr ""
-"%s avadanlığında medya yoxdur.\n"
-"XahiƟ edirik. birini taxın."
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "%s avadanlığında medya olduğundan əmin olun"
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Build the disk"
-msgstr "Diski yarat"
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Output"
-msgstr "Nəticə"
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Remove a module"
-msgstr "Modulu çıxart"
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Add a module"
-msgstr "Modul əlavə et"
+"Sınaq səhifəsi çap edici vasitəsinə göndərildi.\n"
+"Çap edicinin iƟləməsi ĂŒĂ§ĂŒn bir az vaxt keçər.\n"
+"DĂŒz mĂŒ iƟləyir?"
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "omit scsi modules"
-msgstr "scsi modulları keç"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Username required"
+msgstr "Ä°stifadəçi adı"
-#: ../../standalone/drakfloppy:1
+#: ../../help.pm:1
#, c-format
-msgid "if needed"
-msgstr "lazım olarsa"
+msgid ""
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "omit raid modules"
-msgstr "raid modulları keç"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "SMB (Windows 9x/NT) Çap Edici Seçənəkləri"
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
-msgid "force"
-msgstr "zorla"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
#: ../../standalone/drakfloppy:1
#, c-format
msgid "mkinitrd optional arguments"
msgstr "mkinitrdin arzuya bağlı olan arqumentləri"
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Expert Area"
-msgstr "Ustaların Sahəsi"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "kernel version"
-msgstr "çəyirdək buraxılÄ±ĆŸÄ±"
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "Protocol for the rest of the world"
+msgstr "BĂŒtĂŒn dĂŒnya"
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "default"
-msgstr "əsas"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Print test pages"
+msgstr "Sınaq səhifəsi çap edilir..."
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "General"
-msgstr "Ümumi"
+msgid "64 MB or more"
+msgstr "64 MB və ya daha çox"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "boot disk creation"
-msgstr "açılÄ±ĆŸ disketi yaradılması"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "Please select the device where your %s is attached"
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Size"
-msgstr "BöyĂŒklĂŒk"
+msgid "Not formatted\n"
+msgstr "ƞəkilləndirilməmiƟ\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Module name"
-msgstr "Modul adı"
-
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Post Uninstall"
-msgstr "Qurulumdan çıx"
+msgid "Periodic Checks"
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "Remove fonts on your system"
-msgstr "Siseminizdə Ɵəbəkə adapteri yoxdur!"
+msgid "PXE Server Configuration"
+msgstr "Yerli ƞəbəkə QuraƟdırılması"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Initial tests"
-msgstr "İnit İsmarıcı"
+msgid "Backup the system files before:"
+msgstr "Xətalı yedəkləmə faylı"
-#: ../../standalone/drakfont:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Post Install"
-msgstr "Qurulum"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"Ä°nternetə bağlı bir kompĂŒter ĂŒĂ§ĂŒn standart və tövsiyə edilən bir "
+"təhlĂŒkəsizlik səviyyəsidir."
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Install & convert Fonts"
-msgstr ""
+msgid "First floppy drive"
+msgstr "Ä°lk disket sĂŒrĂŒcĂŒ"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Copy fonts on your system"
-msgstr "Siseminizdə Ɵəbəkə adapteri yoxdur!"
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "/File/_Quit"
+msgstr "/Fayl/_Çıx"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Remove List"
-msgstr "Uzaq Çap Edici"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak"
+msgstr "Dvorak"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Selected All"
-msgstr "Fayl seç"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Choose the new size"
+msgstr "Yeni böyĂŒklĂŒk seçin"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Unselected All"
+msgid "Media class"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "here if no."
+msgid "The %s is not known by this version of Scannerdrake."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "click here if you are sure."
-msgstr ""
+msgid "Faroe Islands"
+msgstr "Faro Adaları"
#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Install List"
-msgstr "Sistemi qur"
+msgid "Restart XFS"
+msgstr "məhdudlaƟdır"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
+msgid "Add host/network"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Generic Printers"
-msgstr "Çap Edici"
+msgid "Please enter the directory to save to:"
+msgstr "XahiƟ edirik siçanınızı seçin"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Abiword"
-msgstr "Dayandır"
+msgid "Model name"
+msgstr "Modul adı"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "StarOffice"
-msgstr "İƟ Yeri"
+#: ../../lang.pm:1
+#, c-format
+msgid "Albania"
+msgstr "Albaniya"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Ghostscript"
+msgid "No CDR/DVDR in drive!"
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "ƞəkilləndiriləcək disk bölmələrini seçin"
+#: ../../lang.pm:1
+#, c-format
+msgid "British Indian Ocean Territory"
+msgstr "Britaniya Hind Okeanı Sahəsi"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "Normal Mode"
+msgstr "Normal Mod"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
+"Please be sure that the cron daemon is included in your services. \n"
"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
+"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "About"
-msgstr "Dayandır"
+msgid "Printer connection type"
+msgstr "Ä°nternet Bağlantısı BölĂŒĆŸdĂŒrĂŒlməsi"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Font List"
-msgstr "Bağlama nöqtəsi"
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#, c-format
+msgid "No network adapter on your system!"
+msgstr "Siseminizdə Ɵəbəkə adapteri yoxdur!"
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Advanced Options"
-msgstr "Yerli ƞəbəkə QuraƟdırılması"
+msgid "Network %s"
+msgstr "ƞəbəkə ara ĂŒzĂŒ"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Uninstall Fonts"
+msgid "Malayalam"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Get Windows Fonts"
+msgid "Option %s out of range!"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Import Fonts"
-msgstr "Bölmə Ɵəkilləndirilməsi"
+msgid "Connect %s"
+msgstr "Bağlan"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "done"
-msgstr "Qurtardı"
+msgid "Restarting CUPS..."
+msgstr "məhdudlaƟdır"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "xfs restart"
-msgstr "məhdudlaƟdır"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "ƞəbəkə dayandırılır"
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Restart XFS"
-msgstr "məhdudlaƟdır"
+msgid "Duplicate mount point %s"
+msgstr "%s bağlama nöqtəsini çoxalt"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Suppress Temporary Files"
+msgid "if set to yes, run chkrootkit checks."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "type1inst building"
-msgstr ""
+msgid "Connection Configuration"
+msgstr "Bağlantı quraƟdırılması"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "Unknown|Generic"
+msgstr "Ümumi"
+
+#: ../../help.pm:1
#, c-format
-msgid "pfm fonts conversion"
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "ttf fonts conversion"
-msgstr ""
+msgid "Quit"
+msgstr "Çıx"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ghostscript referencing"
-msgstr ""
+msgid "Myanmar"
+msgstr "Myanmar"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Fonts conversion"
-msgstr ""
+msgid "Auto allocate"
+msgstr "Avtomatik ayır"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "True Type install done"
-msgstr ""
+msgid "Check bad blocks?"
+msgstr "Xətalı bloklar sınansınmı?"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Other MultiMedia devices"
+msgstr "Digər"
+
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "No remote machines"
+msgstr "Uzaq Çap Edici"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "please wait during ttmkfdir..."
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "True Type fonts installation"
-msgstr "Qurulum hazırlanır"
+msgid "Authentication NIS"
+msgstr "NIS"
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Fonts copy"
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
+"``Əmr sətiri seçənəklərini məhdudlaƟdır`` seçənəyi parolsuz bir iƟə yaramaz"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Search for fonts in installed list"
-msgstr ""
+msgid "Internet Connection Sharing currently enabled"
+msgstr "Ä°nternet Bağlantısı BölĂŒĆŸdĂŒrĂŒlməsi fəallaƟdırıldı"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "could not find any font.\n"
-msgstr ""
+msgid "Card IO_0"
+msgstr "Kart IO_0"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Reselect correct fonts"
-msgstr ""
+msgid "United Arab Emirates"
+msgstr "BirləƟmiƟ Ərəb Əmirlikləri"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr ""
+msgid "Card IO_1"
+msgstr "Kart IO_1"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "no fonts found"
-msgstr "Ɵəbəkə kartı tapılmadı"
+#: ../../lang.pm:1
+#, c-format
+msgid "Thailand"
+msgstr "Tayland"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "parse all fonts"
+msgid "Routers:"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unselect fonts installed"
-msgstr ""
+msgid "Kazakhstan"
+msgstr "Qazaxstan"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Search installed fonts"
+msgid "Display all available remote CUPS printers"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../install_steps_newt.pm:1
#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Ä°nternet Bağlantısı BölĂŒĆŸdĂŒrmə vasitəsinə XoƟ Gəldiniz!\n"
-"\n"
-"%s\n"
-"\n"
-"QuraƟdırma sehirbazını açmaq ĂŒĂ§ĂŒn QuraƟdıra tıqlayın."
+msgid "Mandrake Linux Installation %s"
+msgstr "Linuks-Mandrake Qurulumu %s"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "Ä°nternet bağlantısı bölĂŒĆŸdĂŒrĂŒlməsi quraƟdırılması"
+msgid "Thai keyboard"
+msgstr "Thai klaviatura"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Ä°nternet Bağlantısı BölĂŒĆŸdĂŒrmə QuraƟdırması aparılmayıb."
+msgid "Dialup options"
+msgstr "Çevirməli Ɵəbəkə seçənəkləri"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "QuraƟdırma artıq qurtarıbdır və fəaliyyətdədir."
+msgid "Bouvet Island"
+msgstr "Buvet Adası"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "QuraƟdırma artıq qurtarıbdır, amma fəaliyyəti dayandırılıb."
+msgid "If no port is given, 631 will be taken as default."
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
+"Change your Cd-Rom!\n"
+"\n"
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
-"Hər Ɵey quruldu.\n"
-"Ä°ndi isə Ä°nternet bağlantınızı yerli Ɵəbəkədəkı baƟqa kompĂŒterlər ilə "
-"bölĂŒĆŸdĂŒrə bilərsiniz, bunun ĂŒĂ§ĂŒn isə avtomatik Ɵəbəkə quraƟdırılması (DHCP) "
-"iƟlədilir."
+"Cd-Romu dəyiƟdirin!\n"
+"\n"
+"\"%s\" adlı Cd-Romu sĂŒrĂŒcĂŒnĂŒzə taxın və OLDU'ya basın.\n"
+"Əgər Cd-Rom əlinizdə deyilsə bu Cd-Rom'dan qurmamaq ĂŒĂ§ĂŒn Ä°MTÄ°NA ET'ə basın."
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Problems installing package %s"
-msgstr "%s paketi qurulurkən xəta oldu"
+msgid "Polish"
+msgstr "Polyakca"
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Skriptlə qurulur, proqram tə'minatı qurulur, xidmətlər baƟladılır..."
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Mandrake Online"
+msgstr "İdarə Mərkəzi"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configuring..."
-msgstr "QuraƟdırılır..."
+msgid "\t-Network by webdav.\n"
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "%s quğusunda dəyəsən bir LAN ĂŒnvan çaxÄ±ĆŸması tapıldı!\n"
+msgid ""
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
+msgstr ""
+"Sisteminizdə Ɵəbəkə kartı tapıla bilməyib.Avadanlığı quran vasitəni iƟə "
+"salın."
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakgw:1
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
+msgid "Netmask"
+msgstr "Netmask"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid "No hard drives found"
+msgstr "Yerli Çap Edici"
+
+#: ../../mouse.pm:1
#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr ""
+msgid "Logitech CC Series"
+msgstr "Logitech CC Series"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr ""
+msgid "2 buttons"
+msgstr "2 dĂŒyməli"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The default lease (in seconds)"
-msgstr ""
+msgid "What kind is your ISDN connection?"
+msgstr "ISDN bağlantınızın növĂŒ nədir?"
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
#, c-format
-msgid "The DHCP end range"
-msgstr ""
+msgid "Label"
+msgstr "Etiket"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The DHCP start range"
-msgstr ""
+msgid "Save on floppy"
+msgstr "Disketə qeyd et"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "The internal domain name"
-msgstr "Çap Edicisiz"
+msgid "Printer auto-detection"
+msgstr "Avtomatik təsbit iƟlət"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, fuzzy, c-format
-msgid "The DNS Server IP"
-msgstr "CUPS verici IP"
+msgid "Which of the following is your ISDN card?"
+msgstr "Hansısı sizin ISDN kartınızdır?"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
+msgstr ""
+"NFS TCP/IP Ɵəbəkələrində fayl bölĂŒĆŸĂŒlməsi ĂŒĂ§ĂŒn istifadə edilən məƟhur bir "
+"protokoldur.\n"
+"Bu xidmət, /etc/exports faylında qurğuları olan NFS vericisinin\n"
+"istifadəsinə imkan verər."
+
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "(This) DHCP Server IP"
-msgstr "CUPS verici IP"
+msgid "Msec"
+msgstr "Siçan"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"DHCP Server Configuration.\n"
-"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
-"\n"
+"=> Notice, a label changed:\n"
+"%s"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
+#, c-format
+msgid "Number of capture buffers:"
+msgstr ""
+
+#: ../../interactive/stdio.pm:1
#, fuzzy, c-format
-msgid "Local Network adress"
-msgstr "Ɵəbəkə kartı tapılmadı"
+msgid "Your choice? (0/1, default `%s') "
+msgstr "Seçkiniz? (əsas %s) "
-#: ../../standalone/drakgw:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
"\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
+"\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
+"\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
+"\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
msgstr ""
+"Yeni yaradılan bĂŒtĂŒn bölmələr Ɵəkilləndirilməlidir\n"
+"(Ɵəkilləndirmək yəni fayl sistemi yaratmaq - format).\n"
+"\n"
+"\n"
+"Bu arada var olan hazır bölmələri də ĂŒstĂŒndəkiləri silmək ĂŒĂ§ĂŒnyenidən "
+"Ɵəkilləndirmək istəya\n"
+"bilərsiniz.\n"
+"Bunu istəyirsinizsə bu bölmələri də seçməlisiniz.\n"
+"\n"
+"\n"
+"Bunu ağlınızda tutun ki var olan bĂŒtĂŒn bölmələri Ɵəkilləndirmək\n"
+"məcburi deyil.\n"
+"İƟlətim sistəmini əmələ gətirən bölmələri (yəni\n"
+"\"/\", \"usr\" və ya \"var\"ı yenidən Ɵəkilləndirmək ĂŒĂ§ĂŒn\n"
+"seçə bilərsiniz. Verilər olan \"home\"u məsələ toxunulmadan\n"
+"buraxa bilərsiniz.\n"
+"\n"
+"\n"
+"Diqqətli olun. Ɵəkilləndirdiyiniz bölmələrdəki verilər\n"
+"geri gəlməz.\n"
+"\n"
+"\n"
+"ƞəkilləndirməyə hazır isəniz \"Oldu\" dĂŒyməsini tıqlayın.\n"
+"\n"
+"\n"
+"Yeni Linuks Mandrake sisteminizi qurmaq ĂŒĂ§ĂŒn baƟqa bölmə seçmək\n"
+"istəyirsiniz isə \"Ləğv et\" dĂŒyməsinə basın."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "French"
+msgstr "Fransızca"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTY)"
+msgstr "Çex dili (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
+#, fuzzy, c-format
+msgid "Hardware probing in progress"
+msgstr "%s qapısında tapıldı"
#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Net Device"
+msgstr "Çap Edici Vericisi"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Summary"
+msgstr "MĂŒndəricat"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Current interface configuration"
-msgstr "İnternet qurğuları"
+msgid "Next"
+msgstr "Sonrakı ->"
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
#, fuzzy, c-format
-msgid "Show current interface configuration"
-msgstr "İnternet qurğuları"
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "Sistem yĂŒkləyicisini haraya qurmaq istəyirsiniz?"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "No (experts only)"
+msgid "CHAP"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "Automatic reconfiguration"
-msgstr "Qurulum Tərzi QuraƟdırılması"
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp)"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
"\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
"\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Network interface already configured"
-msgstr "Monitor qurulmayıb"
+#: ../../lang.pm:1
+#, c-format
+msgid "Puerto Rico"
+msgstr "Porto Riko"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Sizi Yerli ƞəbəkəyə bağlayacaq adapteri seçin"
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "Litvanya dili \"number row\" QWERTY"
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
-"%s\n"
"\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
msgstr ""
-"Sistemnizdə bir dənə qurulmuƟ Ɵəbəkə adapteri var:\n"
-"\n"
-"%s\n"
-"\n"
-"Yerli ƞəbəkə adapterinizi qurmaq ĂŒzərəyəm?"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface"
-msgstr "ƞəbəkə ara ĂŒzĂŒ"
+msgid "Anguilla"
+msgstr "Anquilla"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "NIS Domain"
+msgstr "NIS sahəsi"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
+"\n"
+"- User Files:\n"
msgstr ""
-"Sisteminizdə Ɵəbəkə kartı tapıla bilməyib.Avadanlığı quran vasitəni iƟə "
-"salın."
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "No network adapter on your system!"
-msgstr "Siseminizdə Ɵəbəkə adapteri yoxdur!"
+msgid "Antarctica"
+msgstr "Antarktika"
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Interface %s"
-msgstr "Ara ĂŒz %s"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Mount options"
+msgstr "Modul seçənəkləri:"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Ara Üz %s (%s modulu iƟlədilir)"
+msgid "Jamaica"
+msgstr "Yamayka"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, fuzzy, c-format
-msgid "Net Device"
-msgstr "Çap Edici Vericisi"
-
-#: ../../standalone/drakgw:1
-#, c-format
msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle"
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
+#: ../../security/help.pm:1
+#, c-format
msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
msgstr ""
-"KompĂŒterınızi Ä°nternet bağlantısını bölĂŒĆŸdĂŒrmək ĂŒĂ§ĂŒn quraƟdırırsınız.\n"
-"Bu seçənəklə yerli Ɵəbəkənizdəki baƟqa kompĂŒterlər sizin Ä°nternet "
-"bağlantınızdan faydalana biləcəklər.\n"
-"\n"
-"Xəbədarlıq: Yerli ƞəbəkə (LAN) qurmaq ĂŒĂ§ĂŒn uyğun ƞəbəkə Adapterinə "
-"ehtiyacınız var."
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Ä°nternet Bağlantısı BölĂŒĆŸdĂŒrĂŒlməsi"
+msgid "Please wait, preparing installation..."
+msgstr "XahiƟ edirik gözləyin, qurulum hazırlanır"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Ä°nternet Bağlantısı BölĂŒĆŸdĂŒrĂŒlməsi indi açıldı"
+msgid "Czech (QWERTZ)"
+msgstr "Çex dili (QWERTZ)"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Enabling servers..."
-msgstr "Xidmətlər fəallaƟdırılır..."
+msgid "Track network card id (useful for laptops)"
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The port number should be an integer!"
+msgstr "Qapı nömrəsi rəqəmlə yazılmalıdır"
+
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "You must choose an image file first!"
+msgstr "Çap Edici avadanlığı URI"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore from Hard Disk."
+msgstr "Disketdən geri çağır"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "dismiss"
-msgstr "keç"
+msgid "Add to LVM"
+msgstr "LVMə əlavə et"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "reconfigure"
-msgstr "yenidən quraƟdır"
+msgid "DNS server"
+msgstr "DNS verici"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "enable"
-msgstr "fəallaƟdır"
+msgid "Trinidad and Tobago"
+msgstr "Trinidad və Tobaqo"
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "LPD and LPRng do not support IPP printers.\n"
msgstr ""
-"Ä°nternet Bağlantısı BölĂŒĆŸdĂŒrĂŒlməsi qurulması artıq bitdi.\n"
-"Və artıq passivləƟdirilmiƟdir.\n"
-"\n"
-"Nə etmək istəyirsiniz?"
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Ä°nternet Bağlantısı BölĂŒĆŸdĂŒrĂŒlməsi passivləƟdirildi"
+msgid "simple"
+msgstr "bəsit"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Ä°nternet Bağlantısı BölĂŒĆŸdĂŒrĂŒlməsi indi bağlandı"
+msgid "Clear all"
+msgstr "Hamısını təmizlə"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "No test pages"
+msgstr "Bəli, hər iki sınaq səhifəsini də çap et"
+
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Disabling servers..."
-msgstr "Vericilər bağlanır..."
+msgid "Adapter %s: %s"
+msgstr "%s Adapteri: %s"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "disable"
-msgstr "passivləƟdir"
+msgid "Falkland Islands (Malvinas)"
+msgstr "Fokland Adaları (Malvin)"
-#: ../../standalone/drakgw:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
+msgid "Unknown model"
msgstr ""
-"Ä°nternet Bağlantısı BölĂŒĆŸdĂŒrĂŒlməsi qurulması artıq bitdi.\n"
-"Və artıq fəallaƟdırılmÄ±ĆŸdır.\n"
-"\n"
-"Nə etmək istəyirsiniz?"
-#: ../../standalone/drakgw:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Ä°nternet Bağlantısı BölĂŒĆŸdĂŒrĂŒlməsi fəallaƟdırıldı"
+msgid "if set to yes, check files/directories writable by everybody."
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "authentication"
+msgstr "Tanıtma"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup Now"
+msgstr "Fayl sistemi qurğuları"
+
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
+msgid "/_File"
+msgstr "/_Fayl"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
msgstr ""
-#: ../../standalone/drakhelp:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
msgstr ""
+"Linuks 2.2 seriyası çəkirdəklərində firewall\n"
+"qurmaq ĂŒĂ§ĂŒn ĂŒĂ§ĂŒn paket sĂŒzĂŒlməsini baƟlat."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Path"
+msgid "Tamil (ISCII-layout)"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Mayotte"
+msgstr "Mayot"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Creating auto install floppy..."
+msgstr "Avtomatik qurulum disketi hazırlanır"
+
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "group :"
-msgstr "İƟ qrupu"
+msgid "Searching for scanners ..."
+msgstr "Yerli Çap Edici"
-#: ../../standalone/drakperm:1
+#: ../../steps.pm:1
#, fuzzy, c-format
-msgid "user :"
-msgstr "Ä°stifadəçi adı"
+msgid "Partitioning"
+msgstr "Çap Edici"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Path selection"
-msgstr "Paket seçkilərini saxla"
+msgid "Russia"
+msgstr "Rusca"
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "when checked, owner and group won't be changed"
-msgstr ""
+msgid "ethernet card(s) detected"
+msgstr "eternet kart tapıldı"
-#: ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Use group id for execution"
-msgstr "Avtomatik təsbit iƟlət"
+msgid "Syslog"
+msgstr "sistem qeydi"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Use owner id for execution"
-msgstr "Avtomatik təsbit iƟlət"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Can't create catalog!"
+msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
+msgid "Not enough free space for auto-allocating"
+msgstr "Avtomatik yerləƟdirmə ĂŒĂ§ĂŒn boƟ sahə yoxdur"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Set-GID"
-msgstr ""
+msgid "Set root password"
+msgstr "Root parolunu qur"
-#: ../../standalone/drakperm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Set-UID"
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "sticky-bit"
+msgid "After resizing partition %s, all data on this partition will be lost"
msgstr ""
+"%s bölməsi böyĂŒklĂŒyĂŒ dəyiƟdirildirkdən sonra bu bölmədəki bĂŒtĂŒn mə'lumatlar "
+"silinəcəkdir"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Property"
-msgstr "Qapı"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Permissions"
-msgstr "BuraxılÄ±ĆŸ: %s\n"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Current user"
-msgstr "İstifadəçini qəbul et"
-
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "browse"
-msgstr ""
+msgid "Internet connection configuration"
+msgstr "Ä°nternet bağlantısı quraƟdırılması"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Edit current rule"
+msgid "Scanning for TV channels"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "edit"
+msgid "Kernel:"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Delete selected rule"
-msgstr "Növbəni sil"
+msgid "/_About..."
+msgstr "/Kömək/_Haqqında..."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "delete"
-msgstr "Sil"
+msgid "Bengali"
+msgstr "fəallaƟdır"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Add a new rule at the end"
-msgstr "Çap Edicisiz"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Preference: "
+msgstr "XĂŒsusiyyətlər: "
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "add a rule"
-msgstr "Modul əlavə et"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Wizard..."
+msgstr "Sehirbaz..."
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "Move selected rule down one level"
+msgid "Services: %d activated for %d registered"
msgstr ""
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Down"
-msgstr "Qurtardı"
+#: ../../any.pm:1
+#, c-format
+msgid "Create a bootdisk"
+msgstr "AçılÄ±ĆŸ disketi yarat"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Move selected rule up one level"
-msgstr ""
+msgid "Solomon Islands"
+msgstr "Solomon Adaları"
-#: ../../standalone/drakperm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Up"
-msgstr ""
+msgid "(module %s)"
+msgstr "(modul %s)"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "select perm file to see/edit"
-msgstr ""
+msgid "Workgroup"
+msgstr "İƟ qrupu"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer host name or IP"
+msgstr "Çap Edici Ev sahibi"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
+msgid "Host Path or Module"
msgstr ""
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "permissions"
-msgstr "bölmə %s"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Name of printer should contain only letters, numbers and the underscore"
+msgstr "Çap edici adı təkcə hərf, rəqəm və alt xətt daxil edə bilər"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "group"
-msgstr "İƟ qrupu"
+msgid "Show current interface configuration"
+msgstr "İnternet qurğuları"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "user"
-msgstr "Ä°stifadəçi adı"
+#: ../../help.pm:1
+#, c-format
+msgid "Development"
+msgstr "TəcrĂŒbi"
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "path"
-msgstr ""
+msgid "Done"
+msgstr "Qurtardı"
-#: ../../standalone/drakpxe:1
+#: ../../network/drakfirewall.pm:1
#, fuzzy, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Avtomatik qurulum disketi hazırlanır"
+msgid "Web Server"
+msgstr "Verici"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
+msgid "\tDo not include System Files\n"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Chile"
+msgstr "Çili"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
msgstr ""
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "No image found"
-msgstr "Yerli Çap Edici"
-
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Installation image directory"
-msgstr "Yerli ƞəbəkə QuraƟdırılması"
-
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
"\n"
+"Do not use \"scannerdrake\" for this device!"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
#, c-format
-msgid "The DHCP end ip"
-msgstr ""
+msgid "(already added %s)"
+msgstr "(%s artıq əlavə edilmiƟdir)"
-#: ../../standalone/drakpxe:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "The DHCP start ip"
+msgid ", using command %s"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
+msgid "Alt and Shift keys simultaneously"
msgstr ""
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Ara Üz %s (%s modulu iƟlədilir)"
-
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr "Ä°nternetə bağlanmaq ĂŒĂ§ĂŒn Ɵəbəkə adapteri seçin."
-
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Flags"
msgstr ""
-"KompĂŒterınızi Ä°nternet bağlantısını bölĂŒĆŸdĂŒrmək ĂŒĂ§ĂŒn quraƟdırırsınız.\n"
-"Bu seçənəklə yerli Ɵəbəkənizdəki baƟqa kompĂŒterlər sizin Ä°nternet "
-"bağlantınızdan faydalana biləcəklər.\n"
-"\n"
-"Xəbədarlıq: Yerli ƞəbəkə (LAN) qurmaq ĂŒĂ§ĂŒn uyğun ƞəbəkə Adapterinə "
-"ehtiyacınız var."
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Installation Server Configuration"
-msgstr "Yerli ƞəbəkə QuraƟdırılması"
+msgid "Add/Del Users"
+msgstr "İstifadəçini əlavə et"
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "PXE Server Configuration"
-msgstr "Yerli ƞəbəkə QuraƟdırılması"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Host/network IP address missing."
+msgstr ""
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Please wait, setting security options..."
-msgstr "XahiƟ edirik gözləyin, qurulum hazırlanır"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "weekly"
+msgstr ""
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Please wait, setting security level..."
-msgstr "TəhlĂŒkəsizlik səviyyəsinin quraƟdırılması"
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Settings"
+msgstr "Qurğular"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Periodic Checks"
+msgid "The entered host/network IP is not correct.\n"
msgstr ""
-#: ../../standalone/draksec:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "System Options"
-msgstr "Modul seçənəkləri:"
+msgid "Here is the full list of available countries"
+msgstr "BĂŒtĂŒn mövcud klaviaturaların siyahısı"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Network Options"
-msgstr "Modul seçənəkləri:"
+msgid "Alternative test page (A4)"
+msgstr "Sınaq səhifəsi çap edilir..."
-#: ../../standalone/draksec:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
+"AƟağıdakı siyahıdakı bĂŒtĂŒn CD'lərə sahib isəniz, OLDU'ya basın.\n"
+"CD'lərin heç birinə sahib deyilsəniz, Ä°MTÄ°NA ET'ə basın.\n"
+"CD'lərdən bə'ziləi əksik isə, onları seçili vəziyyətdən çıxardıb OLDU'ya "
+"basın."
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Security Administrator:"
-msgstr "Uzaq Çap Edici (lpd) Seçənəkləri"
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Wait please"
+msgstr ""
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Security Alerts:"
-msgstr "TəhlĂŒkəsizlik səviyyəsinin quraƟdırılması"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "PAP"
+msgstr "PAP"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Security Level:"
-msgstr "TəhlĂŒkəsizlik səviyyəsinin quraƟdırılması"
+msgid "Backup user files"
+msgstr "Xətalı yedəkləmə faylı"
-#: ../../standalone/draksec:1
+#: ../../diskdrake/dav.pm:1
#, fuzzy, c-format
-msgid "(default value: %s)"
-msgstr " (Əsas)"
+msgid "New"
+msgstr "yeni"
-#: ../../standalone/draksec:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-" to the Internet as a client.\n"
-"\n"
-"High: There are already some restrictions, and more automatic checks "
-"are run every night.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
"\n"
-"Higher: The security is now high enough to use the system as a server "
-"which can accept\n"
-" connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-" should choose a lower level.\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
"\n"
-"Paranoid: This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-" features are at their maximum\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
"\n"
-"Security Administrator:\n"
-" If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-" email)"
-msgstr ""
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
"\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
"\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""
-#: ../../standalone/draksound:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"If you do not know what to choose, stay with the default option."
msgstr ""
-#: ../../standalone/draksound:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "No Sound Card detected!"
-msgstr "Bağlı deyil"
+msgid "Load from floppy"
+msgstr "Disketdən geri çağır"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The following printer was auto-detected. "
+msgstr "AƟağıdakı paketlər sistemdən silinəcəklər"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "%s BootSplash (%s) preview"
+msgid "Boot Floppy"
msgstr ""
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Generating preview ..."
-msgstr "Avadanlıqlar tanınır..."
-
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "You must choose an image file first!"
-msgstr "Çap Edici avadanlığı URI"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Norwegian"
+msgstr "Norveçcə"
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "ProgressBar color selection"
-msgstr "Çap Edici Bağlantısı"
+msgid "Searching for new scanners ..."
+msgstr "Yerli Çap Edici"
-#: ../../standalone/draksplash:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
+msgid "Apache World Wide Web Server"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "saving Bootsplash theme..."
+msgid "stepping of the cpu (sub model (generation) number)"
msgstr ""
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "choose image file"
-msgstr "Monitorunuzu seçin"
-
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "choose image"
-msgstr "Monitorunuzu seçin"
+msgid "select path to restore (instead of /)"
+msgstr "XahiƟ edirik siçanınızın növĂŒnĂŒ seçin."
#: ../../standalone/draksplash:1
#, fuzzy, c-format
msgid "Configure bootsplash picture"
msgstr "Xidmətləri qur"
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "Make kernel message quiet by default"
-msgstr ""
-
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Display logo on Console"
-msgstr ""
+msgid "China"
+msgstr "Çin"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Choose color"
-msgstr "Monitorunuzu seçin"
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr "Modeminizin hansı serial qapıya bağlı olduğunu seçiniz"
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Save theme"
-msgstr "Sistemi qur"
+#: ../../lang.pm:1
+#, c-format
+msgid "Georgia"
+msgstr "GĂŒrcĂŒstan"
-#: ../../standalone/draksplash:1
+#: ../../standalone/printerdrake:1
#, fuzzy, c-format
-msgid "Preview"
-msgstr "avadanlıq"
+msgid "Reading data of installed printers..."
+msgstr "Yerli Çap Edici"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "the color of the progress bar"
+msgid " Erase Now "
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "the height of the progress bar"
-msgstr ""
+msgid "server"
+msgstr "verici"
-#: ../../standalone/draksplash:1
+#: ../../install_any.pm:1
#, c-format
-msgid "the width of the progress bar"
-msgstr ""
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "%s sĂŒrĂŒcĂŒsĂŒnə FAT ƟəkilləndirilmiƟ bir disket taxın"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
+msgid "yes means the processor has an arithmetic coprocessor"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
+msgid "Please Wait... Applying the configuration"
+msgstr "LĂŒtdən Gözləyin... Qurğular əlavə edilir"
-#: ../../standalone/draksplash:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "text box height"
-msgstr ""
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Emeliyyat sistemi secici GRUB'a xos gəlmissiniz!"
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "text width"
-msgstr ""
+msgid "Grub"
+msgstr "Grub"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
+msgid "SCSI controllers"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
+msgid " on LPD server \"%s\", printer \"%s\""
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
#, c-format
-msgid "Browse"
+msgid "Choosing a display manager"
msgstr ""
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Theme name"
-msgstr "PaylaƟdırma adı"
-
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "final resolution"
-msgstr "Rezolyusiya"
-
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, fuzzy, c-format
-msgid "first step creation"
-msgstr "açılÄ±ĆŸ disketi yaradılması"
-
-#: ../../standalone/draksplash:1
-#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
+msgid "Zeroconf Host name"
+msgstr "Ev sahibi adı"
-#: ../../standalone/drakxtv:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
+msgid "IP address should be in format 1.2.3.4"
+msgstr "IP ĂŒnvanı 1.2.3.4 Ɵəklində olmalıdır"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "No TV Card detected!"
-msgstr ""
+msgid "Ecuador"
+msgstr "Ekvador"
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr ""
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Add an item"
+msgstr "İstifadəçi əlavə et"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Have a nice day!"
+msgid "The printers on this machine are available to other computers"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "XawTV isn't installed!"
+msgid "I can't find needed image file `%s'."
msgstr ""
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Paketlər qurulurkən bir xəta oldu:"
-
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Scanning for TV channels"
+msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Scanning for TV channels in progress ..."
+msgid ""
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "Area:"
-msgstr ""
+msgid "Shell"
+msgstr "Qabıq"
-#: ../../standalone/drakxtv:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "TV norm:"
-msgstr ""
+msgid "PCI"
+msgstr "PCI"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
+msgid "Sao Tome and Principe"
+msgstr "Sao Tome və Prinsip"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Australian Optus cable TV"
+msgid "Can't login using username %s (bad password?)"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "France [SECAM]"
-msgstr "Fransızca"
+msgid "Azerbaidjani (latin)"
+msgstr "Azərbaycanca (latın)"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "East Europe"
-msgstr "Avropa"
+msgid "Package not installed"
+msgstr "Qurulumdan çıx"
-#: ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, fuzzy, c-format
-msgid "West Europe"
-msgstr "Avropa"
-
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "China (broadcast)"
-msgstr ""
+msgid "Become a MandrakeExpert"
+msgstr "Usta"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Japan (cable)"
-msgstr ""
+msgid "American Samoa"
+msgstr "Amerikan Samoa"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Japan (broadcast)"
-msgstr ""
+msgid "Protocol"
+msgstr "Protokol"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Canada (cable)"
-msgstr "Fransızca (Kanada/Quebec)"
+msgid "Copy fonts on your system"
+msgstr "Siseminizdə Ɵəbəkə adapteri yoxdur!"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "USA (cable-hrc)"
+msgid "Harddrake help"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "USA (cable)"
+msgid "Bogomips"
msgstr ""
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "USA (broadcast)"
-msgstr ""
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Mandrake Terminal Server Configuration"
+msgstr "İnternet qurğuları"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"XawTV isn't installed!\n"
-"\n"
"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
+" DrakBackup Report Details\n"
"\n"
"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "primary"
+msgid "Restore all backups"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "secondary"
-msgstr "%d saniyə sonra çıxılacaq"
-
-#: ../../standalone/harddrake2:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
+msgid "if set to yes, check open ports."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Unknown"
-msgstr "Ümumi"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "This may take a moment to erase the media."
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "unknown"
-msgstr "bilinməyən"
+msgid "You can't select/unselect this package"
+msgstr "Bu paketi seçə bilməzsiniz/sistemdən çıxarda bilməzsınız"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Running \"%s\" ..."
-msgstr "CUPS sĂŒrĂŒcĂŒ datası oxunur..."
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
+#, c-format
+msgid "Warning"
+msgstr "Xəbərdarlıq"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Run config tool"
+msgid ""
+"\n"
+"- Other Files:\n"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Configure module"
-msgstr "Siçan qurğuları"
-
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Information"
-msgstr "Mə'lumatı göstər"
+msgid "Remote host name"
+msgstr "Uzaqdakı ev sahibi adı"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Detected hardware"
-msgstr "Avadanlıq mə'lumatına bax"
+msgid "deactivate now"
+msgstr "Fəal"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Harddrake2 version "
-msgstr "Sabit disk seçkisi"
+#: ../../any.pm:1
+#, c-format
+msgid "access to X programs"
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../install_interactive.pm:1
#, fuzzy, c-format
-msgid "Detection in progress"
-msgstr "%s qapısında tapıldı"
+msgid "Computing the size of the Windows partition"
+msgstr "Windows bölməsindəki boƟ sahəni iƟlət"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakxtv:1
#, fuzzy, c-format
-msgid "Author:"
-msgstr "Avtomatik yoxla"
+msgid "Italy"
+msgstr "Ä°talyanca"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
-msgstr ""
+msgid "Name of printer"
+msgstr "Çap edici adı"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "About Harddrake"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/_About..."
-msgstr "/Kömək/_Haqqında..."
+msgid "disable"
+msgstr "passivləƟdir"
-#: ../../standalone/harddrake2:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "/_Report Bug"
-msgstr ""
+msgid "error unmounting %s: %s"
+msgstr "%s ayrılırkən xəta oldu: %s"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+msgid "Do it!"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Select a device !"
-msgstr "Ekran kartınızı seçin"
-
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Description of the fields:\n"
-"\n"
-msgstr ""
+msgid "Cayman Islands"
+msgstr "Kayman Adaları"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Harddrake help"
+msgid "%s not responding"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "/_Fields description"
-msgstr "Ä°zah"
+msgid "Select model manually"
+msgstr "Uzaq Çap Edici"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "/_Help"
-msgstr "/_Kömək"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/_Quit"
-msgstr "Çıx"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "Avtomatik təsbit iƟlət"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _modems"
-msgstr "Avtomatik təsbit iƟlət"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _printers"
-msgstr "Avtomatik təsbit iƟlət"
+msgid "Format"
+msgstr "ƞəkilləndir"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "/_Options"
-msgstr "/_Seçənəklər"
+msgid ""
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
+msgstr ""
+"ADSL ilə internetə bağlanmanın ən yaxĆŸÄ± yolu pppoe'dur.\n"
+"Bəzi bağlantılar pptp istifadə edir, çox azı isə dhcp iƟlədir.\n"
+"Bilmirsiniz isə 'pppop istifadə et'i seçin"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "the vendor name of the processor"
+msgid "Various"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "the vendor name of the device"
+msgid "Zip"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "Siçanınızın bağlı olduğu serial Qapıyı seçin."
-
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
+msgid ""
+"\n"
+"\n"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Model stepping"
-msgstr "ƞəkilləndirilir"
-
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "the number of the processor"
+msgid ""
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Processor ID"
+msgid "PDQ"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "network printer port"
-msgstr "ƞəbəkə Çap Edicisi (soket) "
+msgid "Albanian"
+msgstr "Farsca"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "the name of the CPU"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Name"
-msgstr "Ad: "
+msgid "Lithuania"
+msgstr "Litvaniya"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "the number of buttons the mouse has"
-msgstr "2 dĂŒyməli"
+#: ../../any.pm:1
+#, c-format
+msgid "Compact"
+msgstr "Bəsit"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Number of buttons"
-msgstr "2 dĂŒyməli"
+msgid "Detected model: %s %s"
+msgstr "%s tapıldı"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Official vendor name of the cpu"
+msgid "MandrakeSoft has selected the best software for you"
msgstr ""
#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Model name"
-msgstr "Modul adı"
-
-#: ../../standalone/harddrake2:1
#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgid ""
+"This is HardDrake, a Mandrake hardware configuration tool.\n"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Model"
-msgstr "Siçan"
-
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "hard disk model"
-msgstr "Kart mem (DMA)"
+msgid "Local files"
+msgstr "Yerli Çap Edici"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "class of hardware device"
-msgstr ""
+msgid "maybe"
+msgstr "bəlkə"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Media class"
-msgstr ""
+msgid "Panama"
+msgstr "Panama"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Sub generation of the cpu"
+msgid ""
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Level"
-msgstr "səviyyə"
-
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Format of floppies supported by the drive"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Floppy format"
-msgstr "ƞəkilləndir"
+msgid "Monitor"
+msgstr "Monitor"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Halt bug"
-msgstr ""
+msgid "65 thousand colors (16 bits)"
+msgstr "65 min rəng (16 bits)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "F00f bug"
-msgstr ""
+msgid "Size: %d KB\n"
+msgstr "BöyĂŒklĂŒyĂŒ: %d KB\n"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Remove fonts on your system"
+msgstr "Siseminizdə Ɵəbəkə adapteri yoxdur!"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Whether the FPU has an irq vector"
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr ""
+msgid "Graphical interface at startup"
+msgstr "X ilə AçılÄ±ĆŸ"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please enter the directory to save:"
+msgstr "XahiƟ edirik siçanınızı seçin"
#: ../../standalone/harddrake2:1
#, c-format
-msgid "Is FPU present"
+msgid "format of floppies supported by the drive"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../raid.pm:1
#, c-format
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "%d səviyyə RAID ĂŒĂ§ĂŒn çatmayan sayda disk bölməsi\n"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
msgstr ""
+"AƟağıda yazıçıdakı növbələr verilmiƟdir.\n"
+"Yenilərini əlavə edə bilər, və ya mövcud olanları dəyiƟdirə bilərsiniz."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Fdiv bug"
-msgstr ""
+msgid "Connected"
+msgstr "Bağlandı"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "USB printer \\#%s"
+msgstr "Çap Edicisiz"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr ""
+msgid "Macedonian"
+msgstr "Makedoniya dili"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Flags"
+msgid "Bridges and system controllers"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr ""
+msgid "/File/_Save"
+msgstr "/Fayl/_Qeyd Et"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Mali"
+msgstr "Mali"
+
+#: ../../install_steps_gtk.pm:1
#, fuzzy, c-format
-msgid "Module"
-msgstr "Siçan"
+msgid "No details"
+msgstr "Ətraflı"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr ""
+msgid "very nice"
+msgstr "əla"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "New devfs device"
-msgstr "Keçit avadanlığı"
+msgid "Preview"
+msgstr "avadanlıq"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "old static device name used in dev package"
-msgstr ""
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Remote Control"
+msgstr "Uzaq Çap Edici"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Old device file"
-msgstr "Fayl seç"
+msgid "Please select media for backup..."
+msgstr "XahiƟ edirik istifadə ĂŒĂ§ĂŒn bir dil seçin."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "This field describes the device"
-msgstr ""
+msgid "XFree86 server: %s\n"
+msgstr "XFree86 verici: %s\n"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
-msgstr ""
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Allow Thin Clients"
+msgstr "DHCP Alıcısı"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Frequency (MHz)"
-msgstr ""
+msgid "Georgian (\"Russian\" layout)"
+msgstr "GĂŒrcĂŒ dili (\"Rus\" sırası)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
-msgstr ""
+msgid "/_Options"
+msgstr "/_Seçənəklər"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Cpuid level"
-msgstr "TəhlĂŒkəsizlik səviyyəsinin quraƟdırılması"
+msgid "Your printer model"
+msgstr "Uzaq Çap Edici"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
+msgid ""
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Cpuid family"
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Coma bug"
-msgstr ""
+#: ../../share/advertising/04-configuration.pl:1
+#, fuzzy, c-format
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "İnternet qurğuları"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Save"
+msgstr "Hal:"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Drive capacity"
+msgid "The %s is unsupported"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "Size of the (second level) cpu cache"
-msgstr ""
+msgid "Load the drivers for your usb devices."
+msgstr "USB avadanlığınız ĂŒĂ§ĂŒn sĂŒrĂŒcĂŒləri yĂŒkləyin."
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "Cache size"
-msgstr "parça böyĂŒklĂŒyĂŒ"
+msgid "Disk"
+msgstr "Danimarka dili"
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Enter a printer device URI"
+msgstr "Çap Edici avadanlığı URI"
+
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Location on the bus"
-msgstr ""
+msgid "Israel"
+msgstr "Ä°srail"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
-msgstr ""
+msgid "French Guiana"
+msgstr "Fransız Gvineyası"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
+#, c-format
+msgid "default:LTR"
+msgstr "default:LTR"
+
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Bus identification"
-msgstr "Tanıtma"
+msgid "add a rule"
+msgstr "Modul əlavə et"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+msgid "A command line must be entered!"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bogomips"
+msgid "Select user manually"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "EIDE/SCSI channel"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Transfer printer configuration"
+msgstr "İnternet qurğuları"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Channel"
-msgstr "Ləğv et"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "Bağlantınızı açılÄ±ĆŸda baƟlatmaq istəyirsiniz?"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "%s (Port %s)"
+msgstr "Qapı"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use network connection to backup"
+msgstr "Xətalı yedəkləmə faylı"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "Bus"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, c-format
-msgid "the list of alternative drivers for this sound card"
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Alternative drivers"
-msgstr "Sınaq səhifəsi çap edilir..."
-
-#: ../../standalone/keyboarddrake:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Konsolda BackSpace'in Silmə funksyasını görməyini istəyirmisiniz?"
+msgid "Accept user"
+msgstr "İstifadəçini qəbul et"
-#: ../../standalone/keyboarddrake:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Klaviatura quruluƟunu seçiniz."
+msgid "Server"
+msgstr "Verici"
-#: ../../standalone/livedrake:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "TəkmilləƟdirmə iƟi baƟlaya bilmir !!!\n"
+msgid "Bad choice, try again\n"
+msgstr "Xətalı tərcih, təkrar sınayın\n"
-#: ../../standalone/livedrake:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Heard and McDonald Islands"
+msgstr "Hird Adası və Mkdonald Adaları"
+
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
+msgid "No alternative driver"
msgstr ""
-"Qurma Cd-Romunu sĂŒrĂŒcĂŒnĂŒzə taxın və OLDUya basın.\n"
-"Əgər Cd-Rom əlinizdə yox isə, bu Cd-Rom-dan qurmamaq ĂŒĂ§ĂŒn RƏDD ETə basın."
-#: ../../standalone/livedrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Change Cd-Rom"
-msgstr "Cd-Romu dəyiƟdir"
+msgid "Toggle to expert mode"
+msgstr "Usta moduna keç"
-#: ../../standalone/localedrake:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "The change is done, but to be effective you must logout"
+msgid "(on this machine)"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "IP ĂŒnvanı 1.2.3.4 Ɵəklində olmalıdır"
+
+#: ../../network/modem.pm:1
#, c-format
-msgid "Save as.."
-msgstr "Fərqli qeyd et..."
+msgid ""
+"\"%s\" based winmodem detected, do you want to install needed software ?"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Please enter your email address below "
-msgstr "XahiƟ edirik təkrar sınayın"
+msgid "Looking at packages already installed..."
+msgstr "Bu paketi sistemdən çıxarda bilməzsınız. Artıq qurulmuƟdur."
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "alert configuration"
-msgstr "QuraƟdırma"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use Differential Backups"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
+msgid "Driver"
+msgstr "SĂŒrĂŒcĂŒ"
+
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
msgstr ""
+"Linuxconf sistem qurğularınızı idarə edən proqramları\n"
+"mĂŒxtəlif vəzifələri açılÄ±ĆŸda icra edər."
-#: ../../standalone/logdrake:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "load setting"
-msgstr "ƞəkilləndirilir"
+msgid "Printer on remote lpd server"
+msgstr "Uzaq çap edici vericisi(lpd)"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "service setting"
-msgstr "avadanlıq"
+msgid ""
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
+msgstr ""
+"Yaboot NewWorld MacIntosh avadalığı ĂŒĂ§ĂŒn açılÄ±ĆŸ idarəcisidir. Ayrıca\n"
+"GNU/Linuks, MacOS, və ya MacOSX sistemlərini kompĂŒterinizdə varsa, "
+"açacaqdır.\n"
+"Normalda, bu əməliyyat sistemləri dĂŒzgĂŒn tapılıb qurula bilirlər\n"
+"Əgər belə olmazsa, bu ekrandan əllə lazımi qurğuları girə bilərsiniz.\n"
+"DĂŒzgĂŒn parametrləri girib girmədiyinizi yaxĆŸÄ±ca bir yoxlayın.\n"
+"\n"
+"\n"
+"Yaboot ana seçənəkləri:\n"
+"\n"
+"\n"
+" - BaƟlanğıc Ä°smarıcı: AçılÄ±ĆŸdan əvvəl çıxan sadə bir ismarıc.\n"
+"\n"
+"\n"
+" - AçılÄ±ĆŸ Avadanlığı: GNU/Linuksu hardan baƟlatmaq istədiyinizi bildirir."
+"Ümumiyyətlə bu mə'lumatı daha əvvəl \"bootstrap\" quraƟdırılması "
+"sırasındabildirmiƟ olacaqsınız.\n"
+"\n"
+"\n"
+" - Açıq Firmware Gecikməsi: LILOdan fərqli olaraq, yabootda iki dənə "
+"gecikmə vardır\n"
+"Birinci gecikmə saniyələrlə ölĂ§ĂŒlĂŒr və bu arada siz\n"
+"CD, OF açılÄ±ĆŸÄ±, MacOS və ya Linuks arasında seçki aparmalısınız.\n"
+"\n"
+"\n"
+" - Kernel AçılÄ±ĆŸ Vaxt Dolması: Bu vaxt dolması LILO açılÄ±ĆŸ gecikməsinə "
+"uyğun gəlir. Linuksu\n"
+"seçdikdən sonra ana kernel parametri olaraq bu gecikmə 0.1 saniyə olaraq "
+"qurulu olacaqdır.\n"
+"\n"
+"\n"
+" - CD AçılÄ±ĆŸÄ± FəallaƟsınmı?: Bu seçənəklə CDdən açılÄ±ĆŸÄ± timsal edən 'C' "
+"xarakteri ilk açılÄ±ĆŸda çıxacaqdır.\n"
+"\n"
+"\n"
+" - OF AçılÄ±ĆŸÄ± FəallaƟsın?: Bu seçənəklə OFdən (Open Firmware) açılÄ±ĆŸÄ±nı "
+"timsal edən 'N' xarakteri\n"
+"ilk açılÄ±ĆŸda çıxacaqdır.\n"
+"\n"
+"\n"
+" - Ana OS: OF gecikməsi mĂŒddəti dolduğu vaxt hansı OSnin açılacağını "
+"göstərir."
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Xinetd Service"
-msgstr "Çap Edici Vericisi"
+#: ../../mouse.pm:1
+#, c-format
+msgid "No mouse"
+msgstr "Siçansızs"
-#: ../../standalone/logdrake:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, fuzzy, c-format
-msgid "Webmin Service"
-msgstr "avadanlıq"
+msgid "Germany"
+msgstr "Almanca"
-#: ../../standalone/logdrake:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, fuzzy, c-format
-msgid "SSH Server"
-msgstr "NIS Verici"
+msgid "Austria"
+msgstr "serial"
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Samba Server"
-msgstr "NIS Verici"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr ""
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Postfix Mail Server"
-msgstr "Postfix məktub vericisi, Inn xəbər vericisi"
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#, c-format
+msgid "Collapse Tree"
+msgstr "Ağacı Qapat"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Ftp Server"
-msgstr "NIS Verici"
+msgid "Auto Install Configurator"
+msgstr "Qurulum sonrası qurğular"
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Domain Name Resolver"
-msgstr "Sahə(domain) adı"
+#: ../../steps.pm:1
+#, c-format
+msgid "Configure networking"
+msgstr "ƞəbəkəni qur"
-#: ../../standalone/logdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Apache World Wide Web Server"
-msgstr ""
+msgid "Where do you want to install the bootloader?"
+msgstr "Sistem yĂŒkləyicisini haraya qurmaq istəyirsiniz?"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Welcome to the mail configuration utility.\n"
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
"\n"
-"Here, you'll be able to set up the alert system.\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
msgstr ""
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Mail alert configuration"
-msgstr "Yerli ƞəbəkə quraƟdırılması"
-
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Mail alert"
+msgid "The %s is not supported by this version of Mandrake Linux."
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "xahiƟ edirik, gözləyin, fayl daranır: %s"
+msgid "DHCP client"
+msgstr "DHCP alıcısı"
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Content of the file"
-msgstr "Fayl məzmunu"
+msgid "Restoring from file %s failed: %s"
+msgstr "%s faylından qurtarılÄ±ĆŸda xəta: %s"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Calendar"
-msgstr "Təqvim"
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech mouse (serial ya da köhnə C7 növĂŒ)"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose file"
-msgstr "Fayl seç"
+msgid "Are you sure that you want to set up printing on this machine?\n"
+msgstr ""
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "but not matching"
-msgstr "amma oxƟamır"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "New devfs device"
+msgstr "Keçit avadanlığı"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "matching"
-msgstr "oxƟayır"
+msgid "ERROR: Cannot spawn %s."
+msgstr ""
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Settings"
-msgstr "Qurğular"
+msgid "Boot Style Configuration"
+msgstr "Qurulum Tərzi QuraƟdırılması"
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "A tool to monitor your logs"
-msgstr "Qeydlərinizə baxan vasitə"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Automatic time synchronization"
+msgstr "Qurulum Tərzi QuraƟdırılması"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "search"
-msgstr "axtar"
+msgid "Backup files not found at %s."
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Mandrake Tools Explanation"
+msgid "Thank you for choosing Mandrake Linux 9.1"
msgstr ""
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Syslog"
-msgstr "sistem qeydi"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Armenian (phonetic)"
+msgstr "Ermenicə (fonetik)"
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
#, fuzzy, c-format
-msgid "Messages"
-msgstr "ismarıclar"
+msgid "Card model:"
+msgstr "Kart mem (DMA)"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "User"
-msgstr "Ä°stifadəçi adı"
+msgid "Thin Client"
+msgstr "DHCP Alıcısı"
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "/Help/_About..."
-msgstr "/Kömək/_Haqqında..."
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Start Server"
+msgstr "NIS Verici"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "/Options/Test"
-msgstr "/Seçənəklər/Sınaq"
+msgid "Turkmenistan"
+msgstr "TĂŒrkmənistan"
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "/File/-"
-msgstr "/Fayl/-"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "All remote machines"
+msgstr "Uzaq Çap Edici"
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "/File/Save _As"
-msgstr "/Fayl/_Fərqli Qeyd Et"
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Install themes"
+msgstr "Sistemi qur"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "<control>S"
-msgstr "<control>S"
+msgid ""
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "/File/_Save"
-msgstr "/Fayl/_Qeyd Et"
+msgid "Espanol"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "<control>O"
-msgstr "<control>O"
+msgid "Preparing installation"
+msgstr "Qurulum hazırlanır"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/File/_Open"
-msgstr "/Fayl/_Aç"
+msgid "Edit selected host/network"
+msgstr ""
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "<control>N"
-msgstr "<control>N"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Add User -->"
+msgstr "İstifadəçini əlavə et"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "/File/_New"
-msgstr "/Fayl/_Təze"
+msgid "Nauru"
+msgstr "Nauru"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Show only for the selected day"
-msgstr "Təkcə bu gĂŒnĂŒnkĂŒnĂŒ göstər"
+msgid "True Type fonts installation"
+msgstr "Qurulum hazırlanır"
-#: ../../standalone/mousedrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Emulate third button?"
-msgstr "3 dĂŒymə emulasiyası"
+msgid "Auto-detect printers connected directly to the local network"
+msgstr ""
-#: ../../standalone/mousedrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please choose your mouse type."
-msgstr "XahiƟ edirik siçanınızın növĂŒnĂŒ seçin."
+msgid "LAN configuration"
+msgstr "Yerli ƞəbəkə quraƟdırılması"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Connect %s"
-msgstr "Bağlan"
+msgid "hard disk model"
+msgstr "Kart mem (DMA)"
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Disconnect %s"
-msgstr "Bağlantını kəs"
+#: ../../fsedit.pm:1
+#, c-format
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "%s ĂŒĂ§ĂŒn LVM Məntiqi Cildini istifadə edə bilməzsiniz"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
+msgid "Get Windows Fonts"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, c-format
-msgid "received"
-msgstr ""
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "transmitted"
-msgstr ""
+msgid "Iranian"
+msgstr "Farsca"
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "received: "
-msgstr ""
+msgid "Croatia"
+msgstr "Xırvatıstan"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "sent: "
-msgstr ""
+msgid "Gateway:"
+msgstr "Keçit:"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Local measure"
-msgstr "Yerli Çap Edici"
+msgid "Add server"
+msgstr "İstifadəçini əlavə et"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remote printer name"
+msgstr "Uzaq Çap Edici"
+
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "average"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together in order to highly reduce hacking risks."
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Device: "
+msgstr "Avadanlıq: "
+
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, fuzzy, c-format
-msgid "Color configuration"
-msgstr "QuraƟdırma"
+msgid "Printerdrake"
+msgstr "Çap Edici"
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
+msgid "License agreement"
+msgstr "Lisenziya sözləƟməsi"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "Connection complete."
-msgstr "Bağlantı növĂŒ:"
+msgid "System Options"
+msgstr "Modul seçənəkləri:"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Disconnection from the Internet complete."
+msgid "Please enter the directory where backups are stored"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid "Please choose the desired security level"
+msgstr "TəhlĂŒkəsizlik səviyyəsini seçin"
+
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Disconnection from the Internet failed."
+msgid "This host is already in the list, it cannot be added again.\n"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Connecting to the Internet "
-msgstr "İnternetə bağlan"
+msgid ", USB printer"
+msgstr "Çap Edicisiz"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Disconnecting from the Internet "
-msgstr "İnternetə bağlan"
+msgid "Choose the applications that will support the fonts:"
+msgstr "ƞəkilləndiriləcək disk bölmələrini seçin"
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Bağlantınız sınanır..."
+#: ../../steps.pm:1
+#, c-format
+msgid "Configure X"
+msgstr "X qur"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Logs"
-msgstr ""
+msgid "Turkish (traditional \"F\" model)"
+msgstr "TĂŒrkcə (ənənəvi \"F\" klaviatura)"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Congratulations!"
+msgstr "Təbriklər!"
+
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Connection Time: "
-msgstr "Bağlantı növĂŒ:"
+msgid "Use owner id for execution"
+msgstr "Avtomatik təsbit iƟlət"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Down"
+msgstr "Qurtardı"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Receiving Speed:"
+msgid "Raw printer (No driver)"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../network/modem.pm:1
#, fuzzy, c-format
-msgid "Sending Speed:"
-msgstr "Fayla qeyd et"
+msgid "Install rpm"
+msgstr "Qurulum"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Statistics"
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
msgstr ""
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Profile "
-msgstr "Profil: "
-
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Network Monitoring"
-msgstr "ƞəbəkə quraƟdırılması"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Time remaining "
+msgstr "Qalan mĂŒddət"
-#: ../../standalone/printerdrake:1
-#, fuzzy, c-format
-msgid "Reading data of installed printers..."
-msgstr "Yerli Çap Edici"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "UK keyboard"
+msgstr "İngiliz (UK) klaviaturası"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Name/IP address of host:"
-msgstr ""
+msgid "Unmount"
+msgstr "Ayır"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
+msgid "Uninstall Fonts"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../mouse.pm:1
#, fuzzy, c-format
-msgid "Scannerdrake"
-msgstr "Ekran kartınızı seçin"
+msgid "Microsoft Explorer"
+msgstr "Microsoft IntelliMouse"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "XahiƟ edirik siçanınızı seçin"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "German (no dead keys)"
+msgstr "Almanca (ölĂŒ dĂŒymələr olmasın)"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
+msgid "Transferring %s..."
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Sharing of local scanners"
-msgstr "Yerli Çap Edici"
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "32 thousand colors (15 bits)"
+msgstr "32 min rəng (15 bits)"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "This machine"
-msgstr "oxƟayır"
+#: ../../any.pm:1
+#, c-format
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Remove selected host"
-msgstr "Növbəni sil"
+msgid "Reboot"
+msgstr "Kök"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Edit selected host"
-msgstr "%s tapıldı"
+#: ../../lang.pm:1
+#, c-format
+msgid "Gambia"
+msgstr "Qambiya"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Add host"
-msgstr "İstifadəçini əlavə et"
+msgid "Mandrake Control Center"
+msgstr "İdarə Mərkəzi"
-#: ../../standalone/scannerdrake:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "These are the machines from which the scanners should be used:"
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Usage of remote scanners"
-msgstr "BoƟ sahəni istifadə et"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "All remote machines"
-msgstr "Uzaq Çap Edici"
-
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use the scanners on hosts: "
+msgid "\t-Tape \n"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakhelp:1
#, c-format
-msgid "Use scanners on remote computers"
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Çap Edici"
+msgid "Remember this password"
+msgstr "Parolsuz"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr ""
+msgid "Internet Connection Sharing is now enabled."
+msgstr "Ä°nternet Bağlantısı BölĂŒĆŸdĂŒrĂŒlməsi indi açıldı"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
+msgid "\t-Network by SSH.\n"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Re-generating list of configured scanners ..."
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for new scanners ..."
-msgstr "Yerli Çap Edici"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for configured scanners ..."
-msgstr "Yerli Çap Edici"
+msgid "Use the free space on the Windows partition"
+msgstr "Windows bölməsindəki boƟ sahəni iƟlət"
#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Scanner sharing"
-msgstr "Çap Edici"
+msgid "%s found on %s, configure it automatically?"
+msgstr "Bir çap edici qurmaq istəyirsiniz?"
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Add a scanner manually"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Search for new scanners"
-msgstr "Yerli Çap Edici"
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "XFree86 driver: %s\n"
+msgstr "XFree86 sĂŒrĂŒcĂŒ: %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "There are no scanners found which are available on your system.\n"
+msgid "This host/network is already in the list, it cannot be added again.\n"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
+#: ../../standalone/drakbackup:1
+#, c-format
msgid ""
-"The following scanner\n"
"\n"
-"%s\n"
-"is available on your system.\n"
-msgstr "Siseminizdə Ɵəbəkə adapteri yoxdur!"
+" DrakBackup Report \n"
+"\n"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the packages you want to install"
+msgstr "Qurmaq istədiyiniz paketləri seçin"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Papua New Guinea"
+msgstr "Papua Yeni Qvineya"
+
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr "Siseminizdə Ɵəbəkə adapteri yoxdur!"
+msgid "Serbian (cyrillic)"
+msgstr "Azərbaycanca (kiril)"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
+msgid "Make kernel message quiet by default"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "choose device"
-msgstr "AçılÄ±ĆŸ avadanlığı"
+msgid ""
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
+msgstr "Çap edicini sınamaq istəyirsiniz?"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please select the device where your %s is attached"
+msgid "The DHCP end range"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for scanners ..."
-msgstr "Yerli Çap Edici"
+#: ../../any.pm:1
+#, c-format
+msgid "Creating bootdisk..."
+msgstr "AçılÄ±ĆŸ disketi yaradılır"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Auto-detect available ports"
-msgstr "Avtomatik təsbit iƟlət"
+msgid "Wait please, testing your connection..."
+msgstr "Bağlantınız sınanır..."
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr ""
+msgid "Bringing down the network"
+msgstr "ƞəbəkə dayandırılır"
-#: ../../standalone/scannerdrake:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
+msgid "Login ID"
+msgstr "GiriƟ adı"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
-msgid "The %s is unsupported"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
msgstr ""
+"NFS TCP/IP Ɵəbəkələrində fayl bölĂŒĆŸĂŒlməsi ĂŒĂ§ĂŒn istifadə edilən məƟhur bir \n"
+"protokoldur. Bu xidmət NFS fayl qıfılı istifadəsinə imkan verər."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr ""
+msgid "DHCP Client"
+msgstr "DHCP Alıcısı"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
-msgstr ""
+msgid "dismiss"
+msgstr "keç"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Port: %s"
-msgstr "Qapı"
+msgid "Printing/Scanning on \"%s\""
+msgstr "ƞəbəkə dayandırılır"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ", "
+msgid "omit raid modules"
+msgstr "raid modulları keç"
+
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
+"lpd, lpr'nin dĂŒzgĂŒn olaraq iƟləməsi ĂŒĂ§ĂŒn lazımi çap edici vasitəsidir.\n"
+"lpd əsasən, çap vəzifələrini idarə edən və onları çap ediciyə göndərən "
+"vericidir."
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Detected model: %s"
-msgstr "%s tapıldı"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet Connection Configuration"
+msgstr "Ä°nternet Bağlantısı QuraƟdırılması"
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid " ("
+msgid "comma separated numbers"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Select a scanner model"
-msgstr "Ekran kartınızı seçin"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid ""
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
+msgid "Move selected rule up one level"
msgstr ""
#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "Bir çap edici qurmaq istəyirsiniz?"
+msgid ""
+"The following scanner\n"
+"\n"
+"%s\n"
+"is available on your system.\n"
+msgstr "Siseminizdə Ɵəbəkə adapteri yoxdur!"
-#: ../../standalone/service_harddrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Hardware probing in progress"
-msgstr "%s qapısında tapıldı"
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "ƞəbəkəni yenidən baƟlatmaq istəyirsiniz?"
-#: ../../standalone/service_harddrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Some devices were added:\n"
-msgstr ""
+msgid "I can't find any room for installing"
+msgstr "Artıq bölmə əlavə edilə bilməz"
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Default printer"
+msgstr "Yerli Çap Edici"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
msgstr ""
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Welcome to the Open Source world."
-msgstr ""
+msgid "Modify RAID"
+msgstr "RAIDi dəyiƟdir"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
+msgid ""
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
msgstr ""
+"ISDN PCI kart tapdım, amma növĂŒnĂŒ bilmirəm. XahiƟ edirik sonrakı ekrandakı "
+"kartlardan birini seçin."
-#: ../../share/advertising/02-community.pl:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
-msgstr ""
+msgid "Add user"
+msgstr "İstifadəçini əlavə et"
-#: ../../share/advertising/02-community.pl:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
-msgstr ""
+msgid "RAID-disks %s\n"
+msgstr "RAID-diskləri %s\n"
-#: ../../share/advertising/02-community.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid "Build the future of Linux!"
-msgstr ""
+msgid "Liberia"
+msgstr "Liberiya"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
msgstr ""
-#: ../../share/advertising/03-software.pl:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
-msgstr ""
+msgid "Choose your keyboard"
+msgstr "Klaviaturanızı seçin"
-#: ../../share/advertising/03-software.pl:1
+#: ../../steps.pm:1
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr ""
+msgid "Format partitions"
+msgstr "Bölmə Ɵəkilləndirilməsi"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Automatic correction of CUPS configuration"
+msgstr "Qurulum Tərzi QuraƟdırılması"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Running \"%s\" ..."
+msgstr "CUPS sĂŒrĂŒcĂŒ datası oxunur..."
+
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
+msgid "enable radio support"
msgstr ""
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "İnternet qurğuları"
+msgid "Scanner sharing to hosts: "
+msgstr "Çap Edici"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
-msgstr ""
+msgid "Loopback file name: %s"
+msgstr "Loopback faylı adı: %s"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "Modeminizin hansı serial qapıya bağlı olduğunu seçiniz"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "A customizable environment"
+msgid "Do not transfer printers"
msgstr ""
-#: ../../share/advertising/06-development.pl:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Delay before booting the default image"
+msgstr "AçılÄ±ĆŸda gecikmə mĂŒddəti"
+
+#: ../../standalone/drakfont:1
#, c-format
msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+" DUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
msgstr ""
-#: ../../share/advertising/06-development.pl:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check for multisession CD"
+msgstr "XahiƟ edirik bir bölmə ĂŒstĂŒnə tıqlayın"
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "user"
+msgstr "Ä°stifadəçi adı"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Hard Disk to backup"
+msgstr "Xətalı yedəkləmə faylı"
+
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr ""
+msgid "Configure"
+msgstr "Qur"
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scannerdrake"
+msgstr "Ekran kartınızı seçin"
+
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
msgstr ""
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Turn your computer into a reliable server"
+msgid "Backup Users"
msgstr ""
-#: ../../share/advertising/08-store.pl:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
msgstr ""
+"XahiƟ edirik kompĂŒterinizn adını girin.\n"
+"Məsələn``kompĂŒteradı.sahəadı.com''.\n"
+"Əgər Ɵəbəkə keçidi istifadə edirsinizsə bunun da IP nömrəsini girməlisiniz."
-#: ../../share/advertising/08-store.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Select Printer Spooler"
+msgstr "Çap Edici Bağlantısı Seçin"
+
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Create new theme"
+msgstr "Yeni bölmə yarat"
+
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The official MandrakeSoft Store"
+msgid "Mandrake Tools Explanation"
msgstr ""
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "No image found"
+msgstr "Yerli Çap Edici"
+
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
msgstr ""
+"Bəzi paketlər doğru olaraq qurulumu bitirmədi.\n"
+"cdrom sĂŒrĂŒcĂŒnĂŒz ya da cdromunuz dĂŒzgĂŒn iƟləmir.\n"
+"Əvvəldən Linuks qurulu bir sistemdə \"rpm -qpl Mandrake/RPMS/*.rpm\"'yi\n"
+"istifadə edərək Cd-Rom'u yoxlayın.\n"
-#: ../../share/advertising/09-mdksecure.pl:1
-#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
-msgstr ""
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Detected model: %s"
+msgstr "%s tapıldı"
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakedm:1
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Optimize your security by using Mandrake Linux"
+msgid "if set to yes, run the daily security checks."
msgstr ""
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr ""
+msgid "Azerbaijan"
+msgstr "Azərbaycan"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
+msgid "No tape in %s!"
msgstr ""
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr ""
+msgid "Dvorak (US)"
+msgstr "Dvorak (US)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr ""
+msgid "How is the printer connected?"
+msgstr "Çap ediciniz nə Ɵəkildə bağlıdır?"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Become a MandrakeExpert"
-msgstr "Usta"
-
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
-#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr ""
+msgid "Security level"
+msgstr "TəhlĂŒkəsizlik səviyyəsinin quraƟdırılması"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
-#, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr ""
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "final resolution"
+msgstr "Rezolyusiya"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
#, fuzzy, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "Usta"
+msgid "Services"
+msgstr "avadanlıq"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "4 MB"
+msgstr "4 MB"
#: ../../share/compssUsers:999
msgid "Office Workstation"
@@ -17532,10 +17569,6 @@ msgstr ""
"göstəriciləri, vs."
#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Masa ĂŒstĂŒ"
-
-#: ../../share/compssUsers:999
msgid "Game station"
msgstr "Oyun stansiyası"
@@ -17606,10 +17639,6 @@ msgid ""
msgstr "KDE, əsas qrafiki ara ĂŒz və yardımçi proqramlar kolleksiyası"
#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Qrafiki Ara Üz"
-
-#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Gnome iƟ stansiyası"
@@ -17629,10 +17658,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm, vs."
#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "TəcrĂŒbi"
-
-#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "C və C++ inkiƟaf kitabxanaları, proqramları və daxil ediləcək fayllar"
@@ -17704,39 +17729,82 @@ msgstr "NFS vericisi, SMB vericisi, SSH vericisi, Vəkil Verici"
#: ../../share/compssUsers:999
#, fuzzy
-msgid "Audio station"
-msgstr "Multimedya stansiyası"
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr ""
+"Elektronik məktub və xəbər oxuyucusu (pine, mutt, tin..) və Web səyyahları"
+
+#~ msgid "Internet connection & configuration"
+#~ msgstr "Ä°nternet bağlantısı & quraƟdırılması"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Sound playing/editing programs"
-msgstr "Səs və video çalınması/dĂŒzəliƟ proqramları"
+#~ msgid "Configure the connection"
+#~ msgstr "ƞəbəkəni qur"
+
+#~ msgid "Disconnect"
+#~ msgstr "Bağlantını kəs"
+
+#~ msgid "Connect"
+#~ msgstr "Bağlan"
+
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Bağlantınızı yenidən quraƟdıra bilərsiniz."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Ä°stəsəniz Ä°nternetə bağlana bilərsiniz ya da yeniden quraƟdıra bilərsiniz."
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "Hələ İnternetə bağlı deyilsiniz."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can disconnect or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Bağlantınızı kəsə bilərsiniz. Ya da bağlantını yenidən də quraƟdıra "
+#~ "bilərsiniz."
+
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "Artıq İnternetə bağlısınız."
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Video station"
-msgstr "Oyun stansiyası"
+#~ msgid "Write %s"
+#~ msgstr "XFree %s"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Video playing programs"
-msgstr "Səs və video çalınması/dĂŒzəliƟ proqramları"
+#~ msgid "Author:"
+#~ msgstr "Avtomatik yoxla"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Graphic station"
-msgstr "Oyun stansiyası"
+#~ msgid "Audio station"
+#~ msgstr "Multimedya stansiyası"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Graphics programs"
-msgstr "Qrafika proqramları, məsələn The Gimp"
+#~ msgid "Sound playing/editing programs"
+#~ msgstr "Səs və video çalınması/dĂŒzəliƟ proqramları"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr ""
-"Elektronik məktub və xəbər oxuyucusu (pine, mutt, tin..) və Web səyyahları"
+#~ msgid "Video station"
+#~ msgstr "Oyun stansiyası"
+
+#, fuzzy
+#~ msgid "Video playing programs"
+#~ msgstr "Səs və video çalınması/dĂŒzəliƟ proqramları"
+
+#, fuzzy
+#~ msgid "Graphic station"
+#~ msgstr "Oyun stansiyası"
+
+#, fuzzy
+#~ msgid "Graphics programs"
+#~ msgstr "Qrafika proqramları, məsələn The Gimp"
#, fuzzy
#~ msgid "Printer sharing"
@@ -17904,10 +17972,6 @@ msgstr ""
#~ "iƟləməyə bilər."
#, fuzzy
-#~ msgid "Upgrade"
-#~ msgstr "GĂŒncəlləmə"
-
-#, fuzzy
#~ msgid "Do you want to configure another printer?"
#~ msgstr "Qurğuları sınamaq istəyirsiniz?"
diff --git a/perl-install/share/po/be.po b/perl-install/share/po/be.po
index d02b5504f..3fceb1332 100644
--- a/perl-install/share/po/be.po
+++ b/perl-install/share/po/be.po
@@ -5,7 +5,7 @@
msgid ""
msgstr ""
"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
"PO-Revision-Date: 2000-09-24 12:30 +0100\n"
"Last-Translator: Alexander Bokovoy <ab@avilink.net>\n"
"Language-Team: be\n"
@@ -13,933 +13,1474 @@ msgstr ""
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
+msgid "Scanning partitions to find mount points"
msgstr ""
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid "Cancel"
-msgstr "ĐĐŽĐŒĐ”ĐœĐ°"
-
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Launch userdrake"
+msgid "if set to yes, check additions/removals of suid root files."
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
+msgid "\t\tErase=%s"
msgstr ""
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "network printer port"
+msgstr "ХДтĐșĐ°ĐČы ĐżŃ€Ń‹ĐœŃ‚ŃŃ€ (TCP/Socket)"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Please insert floppy disk:"
+msgstr "УстаўцД ЮысĐșĐ”Ń‚Ńƒ ў ЮысĐșĐ°ĐČĐŸĐŽ %s"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
+msgid "PCMCIA"
+msgstr "PCMCIA"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
+"The backup partition table has not the same size\n"
+"Still continue?"
msgstr ""
+"йаблiца Ń€Đ°Đ·ĐŒŃŃˆŃ‡ŃĐœĐœŃ Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČага ЮысĐșу ĐŒĐ°Đ” iĐœŃˆŃ‹ ĐżĐ°ĐŒĐ”Ń€\n"
+"ПрацягĐČаць ЎалДĐč?"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Выбар паĐșДтаў ĐŽĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
+msgid "Which username"
+msgstr "IĐŒŃ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșу:"
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Custom"
-msgstr "Па ĐČŃ‹Đ±Đ°Ń€Ńƒ"
+msgid "Which type of entry do you want to add?"
+msgstr "ĐŻĐși тып ĐżŃƒĐœĐșта жаЎаДцД ЮаЮаць?"
-#: ../../any.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Allow all users"
-msgstr "ДаЮаць ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°"
+msgid "Restore partition table"
+msgstr "ДаЮатĐșĐŸĐČая таблiца разЎзДлаў"
-#: ../../any.pm:1
+#: ../../printer/cups.pm:1
#, fuzzy, c-format
-msgid "No sharing"
-msgstr "ЧаĐșаДцца"
+msgid "On CUPS server \"%s\""
+msgstr "IP сДрĐČДра SMB"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "More"
-msgstr "ĐŸĐ”Ń€Đ°ĐœĐŸŃ"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Post-install configuration"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ĐżĐ°ŃĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
-#: ../../any.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Here is the full list of available countries"
+msgid "Use ``%s'' instead"
+msgstr "ВыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČĐ°ĐčцД ``%s'' Đ·Đ°ĐŒĐ”ŃŃ‚"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Type"
+msgstr "бып"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
msgstr ""
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Please choose your country."
-msgstr "ĐșĐ°Đ»i ласĐșĐ°, ĐżĐ°Đ·ĐœĐ°Ń‡Ń†Đ” тып ĐČашаĐč ĐŒŃ‹ŃˆŃ‹."
+#: ../../lang.pm:1
+#, c-format
+msgid "Sri Lanka"
+msgstr ""
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid " / Region"
-msgstr "ĐŸĐ°ĐŒĐ”Ń€Ń‹ эĐșŃ€Đ°ĐœŃƒ"
+msgid ""
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr "ĐŁ ĐČашаĐč ŃŃ–ŃŃ‚ŃĐŒĐ” ĐœŃĐŒĐ° ĐœiĐČĐŸĐŽĐœĐ°ĐłĐ° сДтĐșĐ°ĐČага аЮаптара!"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Central African Republic"
+msgstr ""
+
+#: ../../network/network.pm:1
+#, c-format
+msgid "Gateway device"
+msgstr "ĐŸŃ€Ń‹Đ»Đ°ĐŽĐ°-ŃˆĐ»ŃŽĐ·"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Net Method:"
+msgstr ""
+
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "Country"
-msgstr "ĐœĐ°ĐœŃ†iраĐČĐ°ĐœĐœĐ”"
+msgid "Ethernetcard"
+msgstr "цiĐșĐ°ĐČĐ°"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Parameters"
+msgstr ""
+
+#: ../../harddrake/v4l.pm:1
#, fuzzy, c-format
-msgid "All languages"
-msgstr "Выбар ĐŒĐŸĐČы"
+msgid "Auto-detect"
+msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Use Unicode by default"
+msgid "Interface:"
msgstr ""
-#: ../../any.pm:1
+#: ../../steps.pm:1
+#, c-format
+msgid "Select installation class"
+msgstr "Клас ŃƒŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "on CDROM"
+msgstr ""
+
+#: ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid ""
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
+msgstr ""
+"\n"
+"Вы ĐŒĐŸĐ¶Đ°Ń†Đ” Đ°ĐŽĐșлючыцца ці пДраĐșĐ°ĐœŃ„Ń–ĐłŃƒŃ€Đ°ĐČаць ĐČашаД Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ”."
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr "Вы ĐŒĐŸĐ¶Đ°Ń†Đ” Đ°Đ±Ń€Đ°Ń†ŃŒ Ń–ĐœŃˆŃ‹Ń ĐŒĐŸĐČы, яĐșiя Đ±ŃƒĐŽŃƒŃ†ŃŒ ĐŽĐ°ŃŃ‚ŃƒĐżĐœŃ‹ ĐżĐ°ŃĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Please choose a language to use."
-msgstr "Калi ласĐșĐ°, Đ°Đ±ŃŃ€Ń‹Ń†Đ” ĐŒĐŸĐČу ĐŽĐ»Ń ĐșĐ°Ń€Ń‹ŃŃ‚Đ°ĐœĐœŃ."
+msgid "Belarus"
+msgstr "Đ‘Đ”Đ»Đ°Ń€ŃƒŃĐșі"
-#: ../../any.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Choose the window manager to run:"
-msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” ĐŒŃĐœŃĐŽĐ¶Đ°Ń€ ĐČĐŸĐșĐœĐ°Ńž:"
+msgid "Error writing to file %s"
+msgstr "ĐŸĐ°ĐŒŃ‹Đ»ĐșĐ° Đ·Đ°Đżiсу ў фаĐčĐ» %s"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Choose the default user:"
-msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” Đ°ŃĐœĐŸŃžĐœĐ°ĐłĐ° ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°:"
+msgid ""
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
+msgstr ""
+"ampd ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаДцца ĐŽĐ»Ń аЎслДжĐČĐ°ĐœĐœŃ статусу Đ±Đ°Ń‚Đ°Ń€Ńi i ĐČŃĐŽĐ·Đ”ĐœĐœŃ "
+"статыстыĐși.\n"
+"ĐŻĐłĐŸ ĐŒĐŸĐ¶ĐœĐ° ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць ĐŽĐ»Ń ĐČыĐșĐ»ŃŽŃ‡ŃĐœĐœŃ ĐŒĐ°ŃˆŃ‹ĐœŃ‹ пры ĐœiĐ·ĐșiĐŒ зараЎзД Đ±Đ°Ń‚Đ°Ń€Ńi."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Do you want to use this feature?"
-msgstr "Вы жаЎаДцД ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць aboot?"
+msgid "Use tape to backup"
+msgstr "Đ”Ń€ŃĐœĐœŃ‹ фаĐčĐ» Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČĐ°Đč ĐșĐŸĐżii"
-#: ../../any.pm:1
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "The following packages are going to be installed"
+msgstr "ĐĐ°ŃŃ‚ŃƒĐżĐœŃ‹Ń паĐșДты Đ±ŃƒĐŽŃƒŃ†ŃŒ ĐŽĐ°ĐŽĐ°ĐœŃ‹ ĐŽĐ° сiŃŃ‚ŃĐŒŃ‹"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr ""
-"ĐœĐŸĐ¶ĐœĐ° ĐœĐ°ŃŃ‚Ń€ĐŸiць сiŃŃ‚ŃĐŒŃƒ ĐŽĐ»Ń Đ°ŃžŃ‚Đ°ĐŒĐ°Ń‚Ń‹Ń‡ĐœĐ°ĐłĐ° ўĐČĐ°Ń…ĐŸĐŽŃƒ ў сiŃŃ‚ŃĐŒŃƒ ĐŽĐ»Ń\n"
-"Đ°ĐŽĐœĐ°ĐłĐŸ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°. Калi Вы ĐœĐ” жаЎаДцД гэтага, ĐœĐ°Ń†iŃĐœiцД \"ĐĐŽĐŒĐ”ĐœĐ°\"."
+msgid "CUPS configuration"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ°"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Autologin"
-msgstr "ĐŃžŃ‚Đ°ĐŒĐ°Ń‚Ń‹Ń‡ĐœŃ‹ ўĐČĐ°Ń…ĐŸĐŽ у сiŃŃ‚ŃĐŒŃƒ"
+msgid "Hong Kong"
+msgstr ""
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Icon"
-msgstr "ПiĐșŃ‚Đ°ĐłŃ€Đ°ĐŒĐ°"
+msgid "Not enough free space to allocate new partitions"
+msgstr "ĐĐ” хапаД ĐżŃ€Đ°ŃŃ‚ĐŸŃ€Ń‹ ĐŽĐ»Ń стĐČĐ°Ń€ŃĐœĐœŃ ĐœĐŸĐČых разЎзДлаў"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Shell"
-msgstr "ĐĐ±Đ°Đ»ĐŸĐœĐșĐ°:"
+msgid "Moving"
+msgstr "ĐŸĐ”Ń€Đ°ĐœĐŸŃŃ–ĐŒ"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Password (again)"
-msgstr "ĐŸĐ°ŃžŃ‚Đ°Ń€Ń‹Ń†Đ” ĐżĐ°Ń€ĐŸĐ»ŃŒ"
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
+msgstr ""
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Password"
-msgstr "ĐŸĐ°Ń€ĐŸĐ»ŃŒ"
+msgid "("
+msgstr ""
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "User name"
-msgstr "IĐŒŃ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșу:"
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "Real name"
-msgstr "ĐŁĐ»Đ°ŃĐœĐ°Đ” iĐŒŃ"
+msgid ")"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Accept user"
-msgstr "ĐŸŃ€Ń‹ĐœŃŃ†ŃŒ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°"
+msgid "Lebanon"
+msgstr ""
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Done"
-msgstr "Đ—Ń€ĐŸĐ±Đ»Đ”ĐœĐ°"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
-#: ../../any.pm:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Stop"
+msgstr "ĐĄĐ”Đșтар"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Edit selected host"
+msgstr "Đ’Ń‹ĐŽĐ°Đ»iць чаргу ЮруĐșу"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "No CD device defined!"
+msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” фаĐčĐ»"
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Bulgarian (phonetic)"
+msgstr "ĐŃ€ĐŒŃĐœŃĐși (Ń„Đ°ĐœĐ”Ń‚Ń‹Ń‡ĐœŃ‹)"
+
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
+msgid "The DHCP start ip"
msgstr ""
-"ĐŁĐČŃĐŽĐ·iцД iĐŒŃ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșу\n"
-"%s"
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Add user"
-msgstr "ДаЮаць ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°"
+msgid "256 kB"
+msgstr "256 Кб"
#: ../../any.pm:1
#, c-format
-msgid "This user name has already been added"
-msgstr "Гэта iĐŒŃ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșу ŃžĐ¶ĐŸ ĐŽĐ°ĐŽĐ°ĐŽĐ·Đ”ĐœĐ°"
+msgid "Bootloader main options"
+msgstr "Đ“Đ°Đ»ĐŸŃžĐœŃ‹Ń ĐŸĐżŃ†Ń‹i пачатĐșĐŸĐČага Đ·Đ°ĐłŃ€ŃƒĐ·Ń‡Ń‹Đșу"
-#: ../../any.pm:1
+#: ../../standalone.pm:1
+#, c-format
+msgid ""
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
+msgstr ""
+
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "The user name is too long"
-msgstr "Гэта iĐŒŃ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșу ŃžĐ¶ĐŸ ĐŽĐ°ĐŽĐ°ĐŽĐ·Đ”ĐœĐ°"
+msgid "Tape"
+msgstr "бып: "
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Scanning network..."
+msgstr "ĐŻĐși тып ĐČашага ISDN Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ?"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
msgstr ""
-"IĐŒŃ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșу паĐČiĐœĐœĐ° Đ·ĐŒŃŃˆŃ‡Đ°Ń†ŃŒ Đ»iтары Ń‚ĐŸĐ»ŃŒĐși ĐœĐ° ĐœiĐ¶ĐœiĐŒ рэгiстры, \n"
-"Đ»iчбы, `-' i `_'"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please give a user name"
-msgstr "Калi ласĐșĐ°, уĐČŃĐŽĐ·iцД iĐŒŃ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșу"
+msgid "Malaysia"
+msgstr ""
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "This password is too simple"
-msgstr "Гэты ĐżĐ°Ń€ĐŸĐ»ŃŒ Đ·Đ°ĐœĐ°ĐŽŃ‚Đ° ĐżŃ€ĐŸŃŃ‚Ń‹"
+msgid "Swiss (French layout)"
+msgstr "ĐšĐČĐ”ĐčцарсĐși (Đ€Ń€Đ°ĐœŃ†ŃƒĐ·ŃĐșая расĐșлаЎĐșĐ°)"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Please try again"
-msgstr "ĐŸĐ°ŃĐżŃ€Đ°Đ±ŃƒĐčцД яшчэ раз"
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "mkraid ĐœĐ” ĐżŃ€Đ°Ń†Đ°Đ·ĐŽĐŸĐ»ŃŒĐœŃ‹ (ĐŒĐŸĐ¶Đ° raid прылаЎы Đ°ĐŽŃŃƒŃ‚Đœiчаюць?)"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "The passwords do not match"
-msgstr "ĐŸĐ°Ń€ĐŸĐ»i ĐœĐ” супаЮаюць"
+msgid "Webcam"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "(already added %s)"
-msgstr "(ŃƒĐ¶ĐŸ ĐŽĐ°ĐŽĐ°ĐŽĐ·Đ”ĐœĐ° %s)"
+msgid "size of the (second level) cpu cache"
+msgstr ""
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Soundcard"
+msgstr "ĐĄŃ‚Đ°ĐœĐŽĐ°Ń€Ń‚ĐœŃ‹"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "access to compilation tools"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
msgstr ""
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "access to network tools"
+msgid "Level %s\n"
+msgstr "ĐŁĐ·Ń€ĐŸĐČĐ”ĐœŃŒ %s\n"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Luxembourg"
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "access to administrative files"
+msgid ""
+"\n"
+" DrakBackup Daemon Report\n"
+"\n"
+"\n"
msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Iran"
+msgstr "IŃ€Đ°ĐœŃĐși"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "allow \"su\""
+msgid "Bus"
msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to rpm tools"
+msgid "Iraq"
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "access to X programs"
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr "ĐŸĐ°Ń‚ŃĐœŃ†Ń‹ĐčĐœŃ‹ аЮрас ЛВС ĐșĐ°ĐœŃ„Đ»iĐșŃ‚ŃƒĐ” Đ· Đ±ŃĐłŃƒŃ‡Đ°Đč ĐșĐ°ĐœŃ„iгурацыяĐč %s!\n"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Configuring..."
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° IDE"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The setup has already been done, and it's currently enabled."
msgstr ""
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
msgstr ""
-"ĐŁ ĐŒĐ”ĐœŃŽ ĐŒĐ°ŃŽŃ†Ń†Đ° ĐœĐ°ŃŃ‚ŃƒĐżĐœŃ‹Ń ĐżŃƒĐœĐșты.\n"
-"Вы ĐŒĐŸĐ¶Đ°Ń†Đ” ЮаЮаць яшчэ, Đ°Đ»ŃŒĐ±ĐŸ Đ·ĐŒŃĐœiць iŃĐœŃƒŃŽŃ‡Ń‹Ń."
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Other OS (windows...)"
-msgstr "IĐœŃˆĐ°Ń АХ (windows...)"
+msgid "Password (again)"
+msgstr "ĐŸĐ°ŃžŃ‚Đ°Ń€Ń‹Ń†Đ” ĐżĐ°Ń€ĐŸĐ»ŃŒ"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "IĐœŃˆĐ°Ń АХ (MacOS,...)"
+msgid "Search installed fonts"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "IĐœŃˆĐ°Ń АХ (SunOS,...)"
+msgid "Venezuela"
+msgstr ""
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Linux"
-msgstr "Linux"
+msgid "IP address"
+msgstr "IP аЮрас"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "ĐŻĐși тып ĐżŃƒĐœĐșта жаЎаДцД ЮаЮаць?"
+msgid "Choose the sizes"
+msgstr "Выбар ĐżĐ°ĐŒĐ”Ń€Đ°Ńž"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This label is already used"
-msgstr "Гэтая ĐŒĐ”Ń‚ĐșĐ° ŃžĐ¶ĐŸ ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаДцца"
+msgid ""
+"List of data corrupted:\n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../network/modem.pm:1
+#, c-format
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "You must specify a root partition"
-msgstr "Вы паĐČiĐœĐœŃ‹ ĐŒĐ”Ń†ŃŒ разЎзДл swap"
+msgid "Choose another partition"
+msgstr "СтĐČĐ°Ń€ŃĐœĐœĐ” ĐœĐŸĐČага Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Current user"
+msgstr "ĐŸŃ€Ń‹ĐœŃŃ†ŃŒ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°"
+
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Username"
+msgstr "IĐŒŃ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșу:"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "You must specify a kernel image"
+msgid "Left \"Windows\" key"
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "dhcpd Server Configuration"
+msgstr "ЗаĐșĐ°ĐœŃ‡ŃĐœĐœĐ” ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐși"
+
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Empty label not allowed"
-msgstr "Пустая ĐŒĐ”Ń‚ĐșĐ° ĐœĐ” ĐŽĐ°Đ·ĐČĐ°Đ»ŃĐ”Ń†Ń†Đ°"
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
+msgstr ""
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Default"
-msgstr "Па ĐŽĐ°ĐŒĐ°ŃžĐ»Đ”ĐœĐœŃŽ"
+msgid "Guyana"
+msgstr ""
-#: ../../any.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "NoVideo"
+msgid " on Novell server \"%s\", printer \"%s\""
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
-msgid "Initrd-size"
-msgstr "Initrd"
+msgid "Remove a module"
+msgstr "АЎĐČĐ°Ń€ĐŸŃ‚ĐœŃ‹ параЮаĐș ŃŃ‚Đ°Ń€ĐŸĐœĐ°Đș"
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Append"
-msgstr "Đ”Đ°Đ»ŃƒŃ‡Ń‹Ń†ŃŒ"
+msgid "Password"
+msgstr "ĐŸĐ°Ń€ĐŸĐ»ŃŒ"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Label"
-msgstr "ĐœĐ”Ń‚ĐșĐ°"
+msgid ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
+msgstr ""
-#: ../../any.pm:1
-#, c-format
-msgid "Unsafe"
-msgstr "ĐĐ”ĐœĐ°ĐŽĐ·Đ”ĐčĐœĐ°"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Advanced Configuration"
+msgstr "ЗаĐșĐ°ĐœŃ‡ŃĐœĐœĐ” ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐși"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Table"
-msgstr "йаблiца"
+msgid "Scanning on your HP multi-function device"
+msgstr ""
#: ../../any.pm:1
#, c-format
msgid "Root"
msgstr "Root"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Read-write"
-msgstr "Đ§Ń‹Ń‚Đ°ĐœĐœĐ”-Đ·Đ°Đżiс"
+msgid "Choose an existing RAID to add to"
+msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” iŃĐœŃƒŃŽŃ‡Ń‹ RAID ĐŽĐ»Ń ĐŽĐ°ĐŽĐ°ĐœĐœŃ"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "бурэцĐși (ŃŃƒŃ‡Đ°ŃĐœĐ°Ń \"Q\" ĐŒĐ°ĐŽŃĐ»ŃŒ)"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Video mode"
-msgstr "ВiЮэа-Ń€ŃĐ¶Ń‹ĐŒ"
+msgid "Lilo message not found"
+msgstr ""
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Image"
-msgstr "Đ’ĐŸĐ±Ń€Đ°Đ·"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Default OS?"
-msgstr "Па ĐŽĐ°ĐŒĐ°ŃžĐ»Đ”ĐœĐœŃŽ"
+msgid ""
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Enable OF Boot?"
+msgid "if needed"
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore Failed..."
+msgstr "ĐĐŽĐœĐ°ŃžĐ»Đ”ĐœĐœĐ” Đ· фаĐčлу"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _jazz drives"
+msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Enable CD Boot?"
+msgid ""
+"Description:\n"
+"\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
+"\n"
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
+"\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
+"\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
+"\n"
+"\n"
msgstr ""
-#: ../../any.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "Kernel Boot Timeout"
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Open Firmware Delay"
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Current interface configuration"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ Đ· IĐœŃ‚ŃŃ€ĐœŃŃ‚Đ°ĐŒ"
+
+#: ../../printer/data.pm:1
#, c-format
-msgid "Boot device"
-msgstr "Đ—Đ°ĐłŃ€ŃƒĐ·Đ°Ń‡ĐœĐ°Ń прылаЎа"
+msgid "LPD - Line Printer Daemon"
+msgstr ""
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Init Message"
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
msgstr ""
+"\n"
+"Калi ĐČы ĐŒĐ°Đ”Ń†Đ” ISA Đșарту, ĐČДлiŃ‡Ń‹Đœi ĐœĐ° ĐœĐ°ŃŃ‚ŃƒĐżĐœŃ‹ĐŒ эĐșŃ€Đ°ĐœĐ” паĐČiĐœĐœŃ‹ Đ±Ń‹Ń†ŃŒ "
+"ŃĐ°ĐżŃ€Đ°ŃžĐŽĐœŃ‹ĐŒi.\n"
+"\n"
+"Калi ĐČы ĐŒĐ°Đ”Ń†Đ” PCMCIA Đșарту, ĐČы паĐČiĐœĐœŃ‹ ĐČĐ”ĐŽĐ°Ń†ŃŒ irq i io ĐČашаĐč Đșарты.\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Bootloader to use"
-msgstr "Đ“Đ°Đ»ĐŸŃžĐœŃ‹Ń ĐŸĐżŃ†Ń‹i пачатĐșĐŸĐČага Đ·Đ°ĐłŃ€ŃƒĐ·Ń‡Ń‹Đșу"
+msgid "Do not print any test page"
+msgstr "ДруĐș тэстаĐČых ŃŃ‚Đ°Ń€ĐŸĐœĐ°Đș"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Bootloader main options"
-msgstr "Đ“Đ°Đ»ĐŸŃžĐœŃ‹Ń ĐŸĐżŃ†Ń‹i пачатĐșĐŸĐČага Đ·Đ°ĐłŃ€ŃƒĐ·Ń‡Ń‹Đșу"
+msgid "Gurmukhi"
+msgstr ""
#: ../../any.pm:1
#, c-format
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
+msgid "Force No APIC"
msgstr ""
-"Опцыя ``ĐĐ±ĐŒĐ”Đ¶Đ°ĐČĐ°ĐœĐœĐ” ĐŸĐżŃ†Ń‹ŃŃž ĐșĐ°ĐŒĐ°ĐœĐŽĐœĐ°ĐłĐ° раЮĐșу'' ĐœĐ” ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаДцца бДз ĐżĐ°Ń€ĐŸĐ»Ń"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Give the ram size in MB"
-msgstr "ĐŸĐ°Đ·ĐœĐ°Ń‡Ń†Đ” ĐżĐ°ĐŒĐ”Ń€ RAM у Mб"
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr ""
+"Гэты ĐżĐ°Ń€ĐŸĐ»ŃŒ Đ·Đ°ĐœĐ°ĐŽŃ‚Đ° ĐżŃ€ĐŸŃŃ‚Ń‹ (ŃĐłĐŸ ĐŽĐ°ŃžĐ¶Ń‹ĐœŃ паĐČiĐœĐœĐ° Đ±Ń‹Ń†ŃŒ ĐœĐ” ĐŒĐ”ĐœĐ”Đč Đ·Đ° %d Đ»iтараў)"
-#: ../../any.pm:1
-#, c-format
-msgid "Enable multiple profiles"
-msgstr "Đ”Đ°ŃŃ‚ŃƒĐżĐœĐ° ŃˆĐŒĐ°Ń‚ ĐżŃ€ĐŸŃ„iĐ»ŃŃž"
+#: ../../standalone.pm:1
+#, fuzzy, c-format
+msgid "[keyboard]"
+msgstr "КлаĐČiятура"
-#: ../../any.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "ĐŸĐ°Đ·ĐœĐ°Ń‡Ń†Đ” ĐŽĐ°ĐșĐ»Đ°ĐŽĐœŃ‹ ĐżĐ°ĐŒĐ”Ń€ RAM (Đ·ĐœĐŸĐčĐŽĐ·Đ”ĐœĐ° %d Mб)"
+msgid "FTP proxy"
+msgstr "FTP proxy"
-#: ../../any.pm:1
-#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Ачышчаць /tmp пры ĐșĐŸĐ¶ĐœĐ°Đč Đ·Đ°ĐłŃ€ŃƒĐ·Ń†Ń‹"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Install List"
+msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” сiŃŃ‚ŃĐŒŃ‹"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr "ĐĐŽĐœĐ°ŃžĐ»Đ”ĐœĐœĐ” Đ· фаĐčлу"
+
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Create a bootdisk"
-msgstr "СтĐČарыць загр. ЮысĐș"
+msgid "Show only for the selected day"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "restrict"
-msgstr "Đ°Đ±ĐŒĐ”Đ¶Đ°ĐČĐ°ĐœĐœĐ”"
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
+"\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
+"\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Restrict command line options"
-msgstr "ĐĐ±ĐŒĐ”Đ¶Đ°ĐČĐ°ĐœĐœĐ” ĐŸĐżŃ†Ń‹ŃŃž ĐșĐ°ĐŒĐ°ĐœĐŽĐœĐ°ĐłĐ° раЮĐșĐ°"
+msgid "512 kB"
+msgstr "512 Кб"
-#: ../../any.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Force No APIC"
+msgid "Logs"
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Enable ACPI"
+msgid "(Note: Parallel ports cannot be auto-detected)"
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Delay before booting default image"
-msgstr "Đ—Đ°Ń‚Ń€Ń‹ĐŒĐșĐ° пДраЎ Đ·Đ°ĐłŃ€ŃƒĐ·ĐșĐ°Đč ĐČĐŸĐ±Ń€Đ°Đ·Ńƒ па ĐŽĐ°ĐŒĐ°ŃžĐ»Đ”ĐœĐœŃŽ"
+msgid "<control>N"
+msgstr ""
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "compact"
-msgstr "ĐșĐ°ĐŒĐżĐ°ĐșŃ‚ĐœĐ°"
+msgid "What kind of card do you have?"
+msgstr "ĐŻĐși тып Đșарты ĐČы ĐŒĐ°Đ”Ń†Đ”?"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Compact"
-msgstr "ĐšĐ°ĐŒĐżĐ°ĐșŃ‚ĐœĐ°"
+msgid "<control>O"
+msgstr ""
-#: ../../any.pm:1
-#, c-format
-msgid "Bootloader installation"
-msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” Đ·Đ°ĐłŃ€ŃƒĐ·Ń‡Ń‹Đșу"
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Security"
+msgstr "ĐșучараĐČы"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "First sector of boot partition"
-msgstr "ĐŸĐ”Ń€ŃˆŃ‹ сДĐșтар Đ·Đ°ĐłŃ€ŃƒĐ·Đ°Ń‡ĐœĐ°ĐłĐ° Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ"
+msgid ""
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "ĐŸĐ”Ń€ŃˆŃ‹ сДĐșтар прылаЎы (MBR)"
+msgid "<control>Q"
+msgstr ""
-#: ../../any.pm:1
-#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "КуЮы ĐČы жаЎаДцД ŃžŃŃ‚Đ°Đ»ŃĐČаць пачатĐșĐŸĐČы Đ·Đ°ĐłŃ€ŃƒĐ·Ń‡Ń‹Đș?"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Unknown"
+msgstr "ĐĐłŃƒĐ»ŃŒĐœŃ‹"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "LILO/grub Installation"
-msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” LILO/GRUB"
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "SILO Installation"
-msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” SILO"
+msgid "Network Configuration"
+msgstr "ĐšĐ°ĐœŃ„iгурацыя сДтĐși"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Skip"
-msgstr "Прапусцiць"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "On Floppy"
-msgstr "ЗахаĐČĐ°ĐœĐœĐ” ĐœĐ° ЮысĐșĐ”Ń‚Ńƒ"
+msgid "<control>S"
+msgstr ""
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, fuzzy, c-format
-msgid "First sector of the root partition"
-msgstr "ĐŸĐ”Ń€ŃˆŃ‹ сДĐșтар Đ·Đ°ĐłŃ€ŃƒĐ·Đ°Ń‡ĐœĐ°ĐłĐ° Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ"
-
-#: ../../any.pm:1
-#, c-format
msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
msgstr ""
+"ПаЮĐșĐ»ŃŽŃ‡ŃĐœĐœĐ” \n"
+" ĐœĐ” праз D-ĐșĐ°ĐœĐ°Đ» (ĐČŃ‹Đ»ŃƒŃ‡Đ°ĐœŃ‹Ń ĐșĐ°ĐœĐ°Đ»Ń‹)"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Creating bootdisk..."
-msgstr "СтĐČĐ°Ń€ŃĐœĐœĐ” Đ·Đ°ĐłŃ€ŃƒĐ·Đ°Ń‡ĐœĐ°Đč ЮысĐșДты"
+msgid "Option %s must be a number!"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "УстаўцД ЮысĐșĐ”Ń‚Ńƒ ў ЮысĐșĐ°ĐČĐŸĐŽ %s"
+msgid "Notice"
+msgstr "ĐłĐ°Đ»ŃŒŃˆŃ‚ŃƒĐș"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” ЮысĐșĐ°ĐČĐŸĐŽ, у яĐșiĐŒ буЎзД стĐČарацца Đ·Đ°ĐłŃ€ŃƒĐ·Đ°Ń‡ĐœĐ°Ń ЮысĐșДта"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
+msgstr ""
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Second floppy drive"
-msgstr "Другi ЮысĐșĐ°ĐČĐŸĐŽ"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "First floppy drive"
-msgstr "ĐŸĐ”Ń€ŃˆŃ‹ ЮысĐșĐ°ĐČĐŸĐŽ"
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr ""
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "ВыбачаĐčцД, алД ЮысĐșĐ°ĐČĐŸĐŽ ĐœĐ”ĐŽĐ°ŃŃ‚ŃƒĐżĐœŃ‹"
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "What type of partitioning?"
+msgstr "ĐŻĐși тып ЮруĐșарĐși ĐČы ĐŒĐ°Đ”Ń†Đ”?"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
+"file list sent by FTP: %s\n"
+" "
msgstr ""
-"З ĐŽĐ°ĐżĐ°ĐŒĐŸĐłĐ°Đč Đ·Đ°ĐłŃ€ŃƒĐ·Đ°Ń‡ĐœĐ°ĐłĐ° ЮысĐșу ĐČы Đ·ĐŒĐŸĐ¶Đ°Ń†Đ” Đ·Đ°ĐłŃ€ŃƒĐ¶Đ°Ń†ŃŒ Linux таĐșŃĐ°ĐŒĐ° яĐș i \n"
-"ŃŃ‚Đ°ĐœĐŽĐ°Ń€Ń‚ĐœŃ‹ĐŒ Đ·Đ°ĐłŃ€ŃƒĐ·Ń‡Ń‹ĐșĐ°ĐŒ. Гэта ĐŒĐŸĐ¶Đ° Đ±Ń‹Ń†ŃŒ яĐșĐ°ŃĐœĐ°, ĐșĐ°Đ»i ĐČы ĐœĐ” жаЎаДцД \n"
-"ўсталёўĐČаць LILO (цi Grub), ĐșĐ°Đ»i iĐœŃˆĐ°Ń апДрацыĐčĐœĐ°Ń сiŃŃ‚ŃĐŒĐ° ĐČŃ‹ĐŽĐ°Đ»ŃĐ” LILO,\n"
-"цi LILO ĐœĐ” ĐŒĐŸĐ¶Đ° працаĐČаць у ĐČашаĐč ĐșĐ°ĐœŃ„iгурацыi. Đ—Đ°ĐłŃ€ŃƒĐ·Đ°Ń‡ĐœŃ‹ ЮысĐș таĐșŃĐ°ĐŒĐ° "
-"ĐŒĐŸĐ¶Đ°\n"
-"Đ±Ń‹Ń†ŃŒ ĐČыĐșĐ°Ń€Ń‹ŃŃ‚Đ°ĐœŃ‹ ŃŃƒĐŒĐ”ŃĐœĐ° Đ· Ń€Đ°ĐŒĐŸĐœŃ‚ĐœĐ°Đč ЮысĐșДтаĐč Mandrake Linux, яĐșая ĐČĐ”Đ»ŃŒĐŒi \n"
-"ĐżĐ°Đ»Đ”ĐłŃ‡Ń‹Ń†ŃŒ ĐČыратаĐČĐ°ĐœĐœĐ” сiŃŃ‚ŃĐŒŃ‹ ĐżĐ°ŃĐ»Ń Đ·Đ±ĐŸŃŽ.\n"
-"\n"
-"ЖаЎаДцД стĐČарыць Đ·Đ°ĐłŃ€ŃƒĐ·Đ°Ń‡ĐœŃ‹ ЮысĐș зараз?\n"
-"%s"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Interface"
+msgstr "ХДтĐșĐ°ĐČы iĐœŃ‚ŃŃ€Ń„Đ”Đčс"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
+"Options Description:\n"
"\n"
+" - Backup System Files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Backup User Files: \n"
+"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
+"\n"
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane. To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
msgstr ""
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
msgstr ""
-"З ĐŽĐ°ĐżĐ°ĐŒĐŸĐłĐ°Đč Đ·Đ°ĐłŃ€ŃƒĐ·Đ°Ń‡ĐœĐ°ĐłĐ° ЮысĐșĐ° ĐČы Đ·ĐŒĐŸĐ¶Đ°Ń†Đ” Đ·Đ°ĐłŃ€ŃƒĐ¶Đ°Ń†ŃŒ Linux ĐœĐ”Đ·Đ°Đ»Đ”Đ¶ĐœĐ° Đ°ĐŽ\n"
-" ŃŃ‚Đ°ĐœĐŽĐ°Ń€Ń‚ĐœĐ°ĐłĐ° Đ·Đ°ĐłŃ€ŃƒĐ·Ń‡Ń‹ĐșĐ°. Гэта ĐŒĐŸĐ¶Đ° Đ±Ń‹Ń†ŃŒ яĐșĐ°ŃĐœĐ°, ĐșĐ°Đ»i ĐČы ĐœĐ” жаЎаДцД \n"
-"ўсталёўĐČаць SILO, ĐșĐ°Đ»i iĐœŃˆĐ°Ń апДрацыĐčĐœĐ°Ń сiŃŃ‚ŃĐŒĐ° ĐČŃ‹ĐŽĐ°Đ»ŃĐ” SILO, цi SILO ĐœĐ” \n"
-"ĐŒĐŸĐ¶Đ° працаĐČаць у ĐČашаĐč ĐșĐ°ĐœŃ„iгурацыi. Đ—Đ°ĐłŃ€ŃƒĐ·Đ°Ń‡ĐœŃ‹ ЮысĐș таĐșŃĐ°ĐŒĐ° ĐŒĐŸĐ¶Đ° Đ±Ń‹Ń†ŃŒ \n"
-"ĐČыĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đœ ŃŃƒĐŒĐ”ŃĐœĐ° Đ· ĐČыратаĐČĐ°Đ»ŃŒĐœĐ°Đč ЮысĐșДтаĐč Mandrake Linux, яĐșая ĐČĐ”Đ»ŃŒĐŒi \n"
-"ĐżĐ°Đ»Đ”ĐłŃ‡Ń‹Ń†ŃŒ ĐČыратаĐČĐ°ĐœĐœĐ” сiŃŃ‚ŃĐŒŃ‹ ĐżĐ°ŃĐ»Ń Đ·Đ±ĐŸŃŽ.\n"
-"\n"
-"Калi жаЎаДцД стĐČарыць Đ·Đ°ĐłŃ€ŃƒĐ·Đ°Ń‡ĐœŃ‹ ЮысĐș зараз, ŃƒŃŃ‚Đ°ŃžŃ†Đ” ЮысĐșĐ”Ń‚Ńƒ ў ĐżĐ”Ń€ŃˆŃ‹\n"
-"ЮысĐșĐ°ĐČĐŸĐŽ i ĐœĐ°Ń†iŃĐœiцД \"Ok\"."
-#: ../../bootloader.pm:1
+#: ../../modules/parameters.pm:1
#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "КуЮы ĐČы жаЎаДцД ŃžŃŃ‚Đ°Đ»ŃĐČаць пачатĐșĐŸĐČы Đ·Đ°ĐłŃ€ŃƒĐ·Ń‡Ń‹Đș?"
+msgid "comma separated strings"
+msgstr "Đ€Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœĐ” разЎзДлаў"
-#: ../../bootloader.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "not enough room in /boot"
-msgstr "ĐĐ” хапаД ЮысĐșĐ°ĐČĐ°Đč ĐżŃ€Đ°ŃŃ‚ĐŸŃ€Ń‹ ў /boot"
+msgid "These are the machines from which the scanners should be used:"
+msgstr ""
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "The highlighted entry will be booted automatically in %d seconds."
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Messages"
+msgstr "ПраĐČДрĐșĐ° ĐżĐ°Ń€Ń‚ĐŸŃž"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "commands before booting, or 'c' for a command-line."
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr ""
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Press enter to boot the selected OS, 'e' to edit the"
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "POP and IMAP Server"
+msgstr "сДрĐČДр"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use the %c and %c keys for selecting which entry is highlighted."
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Mexico"
+msgstr "ĐŸĐŸŃ€Ń‚ ĐŒŃ‹ŃˆŃ‹"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welcome to GRUB the operating system chooser!"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model stepping"
+msgstr "Ń„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœĐ”"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Rwanda"
+msgstr ""
-#: ../../bootloader.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Grub"
-msgstr "Grub"
+msgid "Do you have any %s interfaces?"
+msgstr "ĐŠi ёсць у ĐČас %s iĐœŃ‚ŃŃ€Ń„Đ”Đčс?"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with text menu"
+msgid "Switzerland"
msgstr ""
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with graphical menu"
+msgid "Brunei Darussalam"
msgstr ""
-#: ../../bootloader.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Remote lpd Printer Options"
+msgstr "Опцыi Đ°ĐŽĐŽĐ°Đ»Đ”ĐœĐ°ĐłĐ° ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ lpd"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
"\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
msgstr ""
-#: ../../common.pm:1
-#, c-format
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../common.pm:1
-#, c-format
-msgid "kdesu missing"
-msgstr ""
-
-#: ../../common.pm:1
+#: ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Вы ĐŒĐŸĐ¶Đ°Ń†Đ” Đ°Đ±Ń€Đ°Ń†ŃŒ Ń–ĐœŃˆŃ‹Ń ĐŒĐŸĐČы, яĐșiя Đ±ŃƒĐŽŃƒŃ†ŃŒ ĐŽĐ°ŃŃ‚ŃƒĐżĐœŃ‹ ĐżĐ°ŃĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
+msgid "Configure Internet Access..."
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ŃĐ»ŃƒĐ¶Đ±Đ°Ńž"
-#: ../../common.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, fuzzy, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "ДаЮаць разЎзДл ĐœĐ”ĐŒĐ°ĐłŃ‡Ń‹ĐŒĐ°"
+msgid "Norway"
+msgstr "НарĐČДжсĐși"
-#: ../../common.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "%d seconds"
-msgstr "%d сДĐșŃƒĐœĐŽĐ°Ńž"
+msgid "Danish"
+msgstr "ДацĐși"
-#: ../../common.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "1 minute"
-msgstr "1 хĐČiĐ»iĐœĐ°"
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
+msgstr ""
-#: ../../common.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "%d minutes"
-msgstr "%d хĐČiĐ»iĐœ"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+"Калi ласĐșĐ°, уĐČŃĐŽĐ·iцД IP ĐșĐ°ĐœŃ„iгурацыю ĐŽĐ»Ń ĐČашаĐč ĐŒĐ°ŃˆŃ‹ĐœŃ‹.\n"
+"ĐšĐŸĐ¶ĐœŃ‹ ĐżŃƒĐœĐșт паĐČiĐœĐ”Đœ Đ±Ń‹Ń†ŃŒ Đ·Đ°ĐżĐŸŃžĐœĐ”ĐœŃ‹ яĐș IP аЮрас ў ĐŽĐ·Đ”ŃŃŃ‚ĐșĐŸĐČĐ°-ĐșŃ€ĐŸĐżĐșĐ°ĐČĐ°Đč \n"
+"ĐœĐ°Ń‚Đ°Ń†Ń‹i (ĐœĐ°ĐżŃ€Ń‹ĐșлаЎ, 1.2.3.4)."
-#: ../../common.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "TB"
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
msgstr ""
-#: ../../common.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "GB"
+msgid "Processors"
msgstr ""
-#: ../../common.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Bulgaria"
+msgstr "МаЮьярсĐși"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "No NIC selected!"
+msgstr "Đ Đ°Đ·ĐŒĐ”Ń€ĐșĐ°ĐČĐ°ĐœĐœĐ”"
+
+#: ../../lang.pm:1
#, c-format
-msgid "MB"
-msgstr "ĐœĐ±"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr ""
-#: ../../common.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "KB"
+msgid ""
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "United States"
+msgid "partition %s is now known as %s"
msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Austria"
-msgstr "ĐżĐ°ŃĐ»ŃĐŽĐŸŃžĐœĐ°Ń"
+msgid "Backup Other files..."
+msgstr "Đ”Ń€ŃĐœĐœŃ‹ фаĐčĐ» Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČĐ°Đč ĐșĐŸĐżii"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "Italy"
-msgstr "IŃ‚Đ°Đ»ŃŒŃĐœŃĐși"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "SMB server IP"
+msgstr "IP сДрĐČДра SMB"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Netherlands"
+msgid "Congo (Kinshasa)"
msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Sweden"
-msgstr "Đ“Đ»."
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Norway"
-msgstr "НарĐČДжсĐși"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "йаблiца Ń€Đ°Đ·ĐŒŃŃˆŃ‡ŃĐœĐœŃ прылаЎы %s буЎзД Đ·Đ°ĐżiŃĐ°ĐœĐ° ĐœĐ° ЮысĐș!"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Greece"
-msgstr "ГрэчасĐși"
+msgid "Installing HPOJ package..."
+msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” паĐșĐ”Ń‚Ńƒ %s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Germany"
-msgstr "ĐŃĐŒĐ”Ń†Đși"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr ""
+"З ĐŽĐ°ĐżĐ°ĐŒĐŸĐłĐ°Đč Đ·Đ°ĐłŃ€ŃƒĐ·Đ°Ń‡ĐœĐ°ĐłĐ° ЮысĐșу ĐČы Đ·ĐŒĐŸĐ¶Đ°Ń†Đ” Đ·Đ°ĐłŃ€ŃƒĐ¶Đ°Ń†ŃŒ Linux таĐșŃĐ°ĐŒĐ° яĐș i \n"
+"ŃŃ‚Đ°ĐœĐŽĐ°Ń€Ń‚ĐœŃ‹ĐŒ Đ·Đ°ĐłŃ€ŃƒĐ·Ń‡Ń‹ĐșĐ°ĐŒ. Гэта ĐŒĐŸĐ¶Đ° Đ±Ń‹Ń†ŃŒ яĐșĐ°ŃĐœĐ°, ĐșĐ°Đ»i ĐČы ĐœĐ” жаЎаДцД \n"
+"ўсталёўĐČаць LILO (цi Grub), ĐșĐ°Đ»i iĐœŃˆĐ°Ń апДрацыĐčĐœĐ°Ń сiŃŃ‚ŃĐŒĐ° ĐČŃ‹ĐŽĐ°Đ»ŃĐ” LILO,\n"
+"цi LILO ĐœĐ” ĐŒĐŸĐ¶Đ° працаĐČаць у ĐČашаĐč ĐșĐ°ĐœŃ„iгурацыi. Đ—Đ°ĐłŃ€ŃƒĐ·Đ°Ń‡ĐœŃ‹ ЮысĐș таĐșŃĐ°ĐŒĐ° "
+"ĐŒĐŸĐ¶Đ°\n"
+"Đ±Ń‹Ń†ŃŒ ĐČыĐșĐ°Ń€Ń‹ŃŃ‚Đ°ĐœŃ‹ ŃŃƒĐŒĐ”ŃĐœĐ° Đ· Ń€Đ°ĐŒĐŸĐœŃ‚ĐœĐ°Đč ЮысĐșДтаĐč Mandrake Linux, яĐșая ĐČĐ”Đ»ŃŒĐŒi \n"
+"ĐżĐ°Đ»Đ”ĐłŃ‡Ń‹Ń†ŃŒ ĐČыратаĐČĐ°ĐœĐœĐ” сiŃŃ‚ŃĐŒŃ‹ ĐżĐ°ŃĐ»Ń Đ·Đ±ĐŸŃŽ.\n"
+"\n"
+"ЖаЎаДцД стĐČарыць Đ·Đ°ĐłŃ€ŃƒĐ·Đ°Ń‡ĐœŃ‹ ЮысĐș зараз?\n"
+"%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Czech Republic"
+msgid ", USB printer \\#%s"
msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Belgium"
-msgstr "Đ‘Đ”Đ»ŃŒĐłiĐčсĐși"
+msgid "Latvian"
+msgstr "Đ Đ°Đ·ĐŒĐ”Ń€ĐșĐ°ĐČĐ°ĐœĐœĐ”"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "France"
-msgstr "Đ€Ń€Đ°ĐœŃ†Ń‹Ń"
+msgid "monthly"
+msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
+#, fuzzy, c-format
+msgid "Module name"
+msgstr "Опцыi ĐŒĐŸĐŽŃƒĐ»ŃŽ:"
+
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Start at boot"
+msgstr "СтĐČарыць загр. ЮысĐș"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Costa Rica"
+msgid "Use Incremental Backups"
msgstr ""
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "ĐŸĐ°ĐŒŃ‹Đ»ĐșĐ° Đ°ĐŽĐșрыцця %s ĐŽĐ»Ń Đ·Đ°Đżiсу: %s"
+msgid "First sector of drive (MBR)"
+msgstr "ĐŸĐ”Ń€ŃˆŃ‹ сДĐșтар прылаЎы (MBR)"
-#: ../../fsedit.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Nothing to do"
+msgid "Joystick"
msgstr ""
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "ĐĐ” хапаД ĐżŃ€Đ°ŃŃ‚ĐŸŃ€Ń‹ ĐŽĐ»Ń стĐČĐ°Ń€ŃĐœĐœŃ ĐœĐŸĐČых разЎзДлаў"
+#: ../../lang.pm:1
+#, c-format
+msgid "El Salvador"
+msgstr ""
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
+#: ../../any.pm:1 ../../help.pm:1
+#, c-format
+msgid "Use Unicode by default"
msgstr ""
-"Đ’Đ°ĐŒ ĐœĐ”Đ°Đ±Ń…ĐŸĐŽĐœĐ° Đ·Đ°ĐŽĐ°Ń†ŃŒ праĐČiĐ»ŃŒĐœŃ‹ тып фаĐčлаĐČĐ°Đč сiŃŃ‚ŃĐŒŃ‹ (ext2, reiserfs)\n"
-"ĐŽĐ»Ń гэтаĐč ĐșŃ€ĐŸĐżĐși ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ\n"
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "the module of the GNU/Linux kernel that handles the device"
msgstr ""
-"Đ’Đ°ĐŒ ĐœĐ”Đ°Đ±Ń…ĐŸĐŽĐœĐ° Đ·Đ°ĐŽĐ°Ń†ŃŒ праĐČiĐ»ŃŒĐœŃ‹ тып фаĐčлаĐČĐ°Đč сiŃŃ‚ŃĐŒŃ‹ (ext2, reiserfs)\n"
-"ĐŽĐ»Ń гэтаĐč ĐșŃ€ĐŸĐżĐși ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ\n"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Гэты ĐșĐ°Ń‚Đ°Đ»ĐŸĐł паĐČŃ–ĐœĐ”Đœ Đ·ĐœĐ°Ń…ĐŸĐŽĐ·Ń–Ń†Ń†Đ° ŃžĐœŃƒŃ‚Ń€Ń‹ ĐșĐ°Ń€Đ°ĐœŃ‘ĐČĐ°Đč фаĐčлаĐČĐ°Đč ŃŃ–ŃŃ‚ŃĐŒŃ‹"
+msgid "Trying to rescue partition table"
+msgstr "ĐŸĐ°ŃĐżŃ€Đ°Đ±ŃƒĐ”ĐŒ ĐČыратаĐČаць таблiцу разЎзДлаў"
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
+msgid "Option %s must be an integer number!"
msgstr ""
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
+#: ../../interactive/stdio.pm:1
+#, c-format
msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
+"Entries you'll have to fill:\n"
+"%s"
msgstr ""
-"Вы абралi RAID разЎзДл яĐș ĐșĐ°Ń€Đ°ĐœŃ‘ĐČы.\n"
-"ĐŃĐŒĐ° Đ·Đ°ĐłŃ€ŃƒĐ·Ń‡Ń‹Đșу, яĐși б Đ·Đ°ĐłŃ€ŃƒĐ·iўся бДз /boot разЎзДла.\n"
-"ДаЮаĐčцД разЎДл /boot, ĐșĐ°Đ»i ласĐșĐ°."
-#: ../../fsedit.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "ĐŁĐ¶ĐŸ ёсць разЎзДл Đ· ĐżŃƒĐœĐșŃ‚Đ°ĐŒ ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ %s\n"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "ĐĐ”ĐŒĐ°ĐłŃ‡Ń‹ĐŒĐ° Đ·Đ°ĐżŃƒŃŃ†Ń–Ń†ŃŒ live upgrade !!!\n"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr ""
+msgid "Name: "
+msgstr "IĐŒŃ: "
-#: ../../fsedit.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "ĐŸŃƒĐœĐșт ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ паĐČiĐœĐ”Đœ ĐżĐ°Ń‡Ń‹ĐœĐ°Ń†Ń†Đ° Đ· /"
+msgid "16 million colors (24 bits)"
+msgstr "16 ĐŒiĐ»ŃŒŃ‘ĐœĐ°Ńž ĐșĐŸĐ»Đ”Ń€Đ°Ńž (24 бiты)"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Allow all users"
+msgstr "ДаЮаць ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°"
+
+#: ../../share/advertising/08-store.pl:1
#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Вы ĐœĐ” ĐŒĐŸĐ¶Đ°Ń†Đ” разбiĐČаць ĐœĐ° разЎДлы, ĐżĐ°ĐŒĐ”Ń€ яĐșiх ĐŒĐ”ĐœĐ”Đč Đ·Đ° 32 ĐœĐ±"
+msgid "The official MandrakeSoft Store"
+msgstr ""
-#: ../../fsedit.pm:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Resizing"
+msgstr "Đ—ĐŒŃĐœĐ”ĐœĐœĐ” ĐżĐ°ĐŒĐ”Ń€Đ°Ńž"
+
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Вы ĐœĐ” ĐŒĐŸĐ¶Đ°Ń†Đ” разбiĐČаць ĐœĐ° разЎДлы, ĐżĐ°ĐŒĐ”Ń€ яĐșiх ĐŒĐ”ĐœĐ”Đč Đ·Đ° 16 ĐœĐ±"
+msgid "Cable connection"
+msgstr "Đ—Đ»ŃƒŃ‡ŃĐœĐœĐ” ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
+
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "User"
+msgstr "IĐŒŃ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșу:"
#: ../../fsedit.pm:1
#, fuzzy, c-format
@@ -959,816 +1500,238 @@ msgstr ""
"\n"
"ĐŠi жаЎаДцД страцiць усД разЎзДлы?\n"
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Error"
-msgstr "ĐŸĐ°ĐŒŃ‹Đ»ĐșĐ°"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr ""
-#: ../../fsedit.pm:1
-#, c-format
-msgid "server"
-msgstr "сДрĐČДр"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer on parallel port \\#%s"
+msgstr "IĐŒŃ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Name"
+msgstr "IĐŒŃ: "
+
+#: ../../raid.pm:1
#, c-format
-msgid "with /usr"
-msgstr ""
+msgid "mkraid failed"
+msgstr "mkraid ĐœĐ” ĐżŃ€Đ°Ń†Đ°Đ·ĐŽĐŸĐ»ŃŒĐœŃ‹"
-#: ../../fsedit.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "simple"
+msgid "Button 3 Emulation"
msgstr ""
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Enabling swap partition %s"
-msgstr "Đ€Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœĐ” Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ %s"
+msgid "Sending files..."
+msgstr "ЗахаĐČĐ°ĐœĐœĐ” ў фаĐčĐ»"
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "error unmounting %s: %s"
-msgstr "ĐżĐ°ĐŒŃ‹Đ»ĐșĐ° Ń€Đ°Đ·ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ %s: %s"
+msgid "Israeli (Phonetic)"
+msgstr "Iўрыт (Ń„Đ°ĐœĐ”Ń‚Ń‹Ń‡ĐœŃ‹)"
-#: ../../fs.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "mounting partition %s in directory %s failed"
+msgid "access to rpm tools"
msgstr ""
-#: ../../fs.pm:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Mounting partition %s"
-msgstr "Đ€Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœĐ” Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ %s"
+msgid "edit"
+msgstr "ĐĄŃŃ€ŃĐŽĐœi"
-#: ../../fs.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Checking %s"
-msgstr "ĐŸĐ°ĐŒĐ”Ń€Ń‹ эĐșŃ€Đ°ĐœŃƒ: %s\n"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Đ€Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœĐ” Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ %s"
+msgid "You must choose/enter a printer/device!"
+msgstr "URI ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Creating and formatting file %s"
-msgstr "СтĐČĐ°Ń€ŃĐœĐœĐ” i Ń„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœĐ” фаĐčла %s"
+msgid "Permission problem accessing CD."
+msgstr ""
-#: ../../fs.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "ĐĐ” ĐČДЎаю яĐș Đ°ĐŽŃ„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČаць %s Đ· Ń‚Ń‹ĐżĐ°ĐŒ %s"
+msgid "Phone number"
+msgstr "ĐŃƒĐŒĐ°Ń€ Ń‚ŃĐ»Đ”Ń„ĐŸĐœŃƒ"
-#: ../../fs.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s ĐżĐ°ĐŒŃ‹Đ»ĐșĐ° Ń„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœŃ %s"
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
+msgid "Printer name, description, location"
+msgstr "Đ—Đ»ŃƒŃ‡ŃĐœĐœĐ” ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (broadcast)"
msgstr ""
-"ĐĐ°Ń†Ń–ŃĐœŃ–Ń†Đ” \"йаĐș\", Đșалі жаЎаДцД ĐČŃ‹ĐŽĐ°Đ»Ń–Ń†ŃŒ усД ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń\n"
-"і разЎзДлы ĐœĐ° ĐłŃŃ‚Ń‹ĐŒ ЮысĐșу. Đ‘ŃƒĐŽĐ·Ń†Đ” уĐČажліĐČыя, ĐżĐ°ŃĐ»Ń гэтаĐč апДрацыі ĐČы ĐœĐ”\n"
-"\n"
-"Đ·ĐŽĐŸĐ»Đ”Đ”Ń†Đ” Đ°ĐŽĐœĐ°ĐČіць Đ»ŃŽĐ±Ń‹Ń ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń і разЎзДлы, ŃƒĐ»Ń–Ń‡ĐČаючы і ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń Windows\n"
-"\n"
-"\n"
-"ĐĐ°Ń†Ń–ŃĐœŃ–Ń†Đ” \"ĐĐŽĐŒĐ”ĐœĐ°\" Đșаб Đ°ĐŽĐŒŃĐœŃ–Ń†ŃŒ апДрацыю бДз страты ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń… і разЎзДлаў"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"ĐĐ±ŃŃ€Ń‹Ń†Đ” Đ¶ĐŸŃ€ŃĐșі ЮысĐș яĐșі жаЎаДцД ачысціць ĐŽĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ\n"
-"ĐœĐŸĐČага Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ Mandrake Linux. Đ‘ŃƒĐŽĐ·Ń†Đ” ўĐČажліĐČыя, усД ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń ĐœĐ° ЮысĐșу "
-"Đ±ŃƒĐŽŃƒŃ†ŃŒ\n"
-" Đ·ĐœŃ–ŃˆŃ‡Đ°ĐœŃ‹ і іх ĐœĐ”ĐŒĐ°ĐłŃ‡Ń‹ĐŒĐ° буЎзД Đ°ĐŽĐœĐ°ĐČіць."
+"Please choose the\n"
+"media for backup."
+msgstr "Калi ласĐșĐ°, Đ°Đ±ŃŃ€Ń‹Ń†Đ” ĐŒĐŸĐČу ĐŽĐ»Ń ĐșĐ°Ń€Ń‹ŃŃ‚Đ°ĐœĐœŃ."
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
+msgid "Use Xinerama extension"
msgstr ""
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Loopback"
+msgstr "ВiŃ€Ń‚ŃƒĐ°Đ»ŃŒĐœĐ°Ń фаĐčлаĐČая сiŃŃ‚ŃĐŒĐ° (loopback)"
+
+#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "West Europe"
+msgstr "Đ•ŃžŃ€ĐŸĐżĐ°"
+
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Harddrake2 version %s"
+msgstr "Đ’Ń‹Đ·ĐœĐ°Ń‡ŃĐœĐœĐ” Đ¶ĐŸŃ€ŃŃ‚Đșага ЮысĐșу"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgid "Copying %s"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "Choose color"
+msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” ĐŒĐ°ĐœiŃ‚ĐŸŃ€"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
+msgid "Dominican Republic"
msgstr ""
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
-"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
+msgid "Swaziland"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
+msgid "Set-UID"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-"LILO (Đ°ĐŽ LInux LOader) i Grub - гэта Đ·Đ°ĐłŃ€ŃƒĐ·Ń‡Ń‹Đși. ĐŻĐœŃ‹ ĐŒĐŸĐłŃƒŃ†ŃŒ Đ·Đ°ĐłŃ€ŃƒĐ·iць "
-"Юругую\n"
-"GNU/Linux цi Đ»ŃŽĐ±ŃƒŃŽ iĐœŃˆŃƒŃŽ апДрацыĐčĐœŃƒŃŽ сiŃŃ‚ŃĐŒŃƒ, ŃƒŃŃ‚Đ°Đ»ŃĐČĐ°ĐœŃƒŃŽ ĐœĐ° ĐșĐ°ĐŒĐżŃƒŃ‚Đ°Ń€Ń‹.\n"
-"ЗĐČычаĐčĐœĐ°, гэтыя iĐœŃˆŃ‹Ń апДрацыĐčĐœŃ‹Ń сiŃŃ‚ŃĐŒŃ‹ ĐșарэĐșŃ‚ĐœĐ° ĐČŃ‹Đ·ĐœĐ°Ń‡Đ°ŃŽŃ†Ń†Đ° i\n"
-"ўсталёўĐČаюцца. Калi гэта ĐœĐ” Đ°Ń‚Ń€Ń‹ĐŒĐ°Đ»Đ°ŃŃ, Ń‚ĐŸ ĐČы ĐŒĐŸĐ¶Đ°Ń†Đ” ЮаЮаць любы Đ·Đ°Đżiс\n"
-"ŃĐ°ĐŒĐ°ŃŃ‚ĐŸĐčĐœĐ°. Đ‘ŃƒĐŽĐ·ŃŒŃ†Đ” ŃžĐżŃŃžĐœĐ”ĐœŃ‹, ŃˆŃ‚ĐŸ ĐČы Đ·Đ°ĐŽĐ°Đ»i ĐșарэĐșŃ‚ĐœŃ‹Ń ĐżĐ°Ń€Đ°ĐŒĐ”Ń‚Ń€Ń‹.\n"
-"\n"
-"\n"
-"йаĐșŃĐ°ĐŒĐ° ĐČы ĐŒĐŸĐ¶Đ°Ń†Đ” ĐżĐ°Đ¶Đ°ĐŽĐ°Ń†ŃŒ i ĐœĐ” ĐŽĐ°Đ±Đ°ŃžĐ»ŃŃ†ŃŒ iĐœŃˆŃ‹Ń апДрацыĐčĐœŃ‹Ń сiŃŃ‚ŃĐŒŃ‹.\n"
-"ĐŁ таĐșiĐŒ ĐČыпаЮĐșу ĐżĐ°Ń‚Ń€ŃĐ±ĐœĐ° ĐČŃ‹ĐŽĐ°Đ»iць аЎпаĐČĐ”ĐŽĐœŃ‹Ń Đ·Đ°Đżiсы. АлД ж таЮы ĐČĐ°ĐŒ \n"
-"ĐżĐ°Ń‚Ń€ŃĐ±ĐœĐ° буЎзД Đ·Đ°ĐłŃ€ŃƒĐ·Đ°Ń‡ĐœĐ°Ń ЮысĐșДта, Đșаб Đ·Đ°ĐłŃ€ŃƒĐ·iцца!"
+msgid "Please check if you are using CDRW media"
+msgstr "ĐĐ°Ń†Ń–ŃĐœŃ–Ń†Đ” ĐœĐ° разЎзДл"
#: ../../help.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
msgstr ""
+"ĐĐ±ŃŃ€Ń‹Ń†Đ” Đ¶ĐŸŃ€ŃĐșі ЮысĐș яĐșі жаЎаДцД ачысціць ĐŽĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ\n"
+"ĐœĐŸĐČага Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ Mandrake Linux. Đ‘ŃƒĐŽĐ·Ń†Đ” ўĐČажліĐČыя, усД ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń ĐœĐ° ЮысĐșу "
+"Đ±ŃƒĐŽŃƒŃ†ŃŒ\n"
+" Đ·ĐœŃ–ŃˆŃ‡Đ°ĐœŃ‹ і іх ĐœĐ”ĐŒĐ°ĐłŃ‡Ń‹ĐŒĐ° буЎзД Đ°ĐŽĐœĐ°ĐČіць."
-#: ../../help.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
+msgid " on parallel port \\#%s"
msgstr ""
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "Use the %c and %c keys for selecting which entry is highlighted."
-#: ../../help.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
-msgstr ""
+msgid "Generic 2 Button Mouse"
+msgstr "ЗĐČычаĐčĐœĐ°Ń ĐŒŃ‹Ńˆ Đ· 2 ĐșĐœĐŸĐżĐșĐ°ĐŒŃ–"
-#: ../../help.pm:1
+#: ../../lvm.pm:1
#, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
+msgid "Remove the logical volumes first\n"
msgstr ""
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "The highlighted entry will be booted automatically in %d seconds."
-#: ../../help.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
+msgid "Internet access"
msgstr ""
-"На ĐČĐ°ŃˆŃ‹ĐŒ ЮысĐșу Đ±Ń‹Đ»ĐŸ Đ·ĐœĐŸĐčĐŽĐ·Đ”ĐœĐ° Đ±ĐŸĐ»Đ”Đč Đ·Đ° Đ°ĐŽĐ·Ń–Đœ разЎзДл\n"
-"Windows. Калі ласĐșĐ°, Đ°Đ±ŃŃ€Ń‹Ń†Đ” Ń‚ĐŸĐč, ĐżĐ°ĐŒĐ”Ń€ яĐșĐŸĐłĐ° жаЎаДцД Đ·ĐŒŃĐœŃ–Ń†ŃŒ, "
-"ĐșĐ°Đ±ŃƒŃŃ‚Đ°Đ»ŃĐČаць\n"
-"ŃŃ–ŃŃ‚ŃĐŒŃƒ Mandrake Linux.\n"
-"\n"
-"\n"
-"Đ”Đ»Ń iŃ„Đ°Ń€ĐŒĐ°Ń†Ń‹Ń–, ĐșĐŸĐ¶ĐœŃ‹ разЎзДл Đ°ĐŽĐ·ĐœĐ°Ń‡Đ°ĐœŃ‹ яĐș: \"Linux Ń–ĐŒŃ\", \"Windows\n"
-"Ń–ĐŒŃ\" \"CĐČĐŸĐčстĐČы\".\n"
-"\"Linux Đ†ĐŒŃ\" ĐșĐ°ĐŽĐ°ĐČĐ°ĐœĐ° таĐș - \"тып ЮысĐșу\", \"ĐœŃƒĐŒĐ°Ń€ ЮысĐșу\",\"ĐœŃƒĐŒĐ°Ń€ "
-"Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ\n"
-"(ĐœĐ°ĐżŃ€Ń‹ĐșлаЎ, \"hda1\").\n"
-"\n"
-"\n"
-"\"бып ЮысĐșу\" ĐșĐ°ĐŽĐ°ĐČĐ°ĐœŃ‹ яĐș \"hd\", Đșалі гэта IDE, і \"sd\" Đșалі SCSI.\n"
-"\n"
-"\"ĐŃƒĐŒĐ°Ń€ ЮысĐșу\" - ŃŃ–ĐŒĐČĐ°Đ» ĐżĐ°ŃĐ»Ń \"hd\" ці \"sd\". Đ”Đ»Ń IDE ЮысĐșаў:\n"
-" * \"Đ°\" \"master\" ĐœĐ° ĐżĐ”Ń€ŃˆĐ°ŃĐœŃ‹ĐŒ ĐșĐ°ĐœĐ°Đ»Đ” IDE \n"
-" * \"b\" \"slave\" ĐœĐ° ĐżĐ”Ń€ŃˆĐ°ŃĐœŃ‹ĐŒ ĐșĐ°ĐœĐ°Đ»Đ” IDE\n"
-" * \"c\" \"master\" ĐœĐ° ĐŽŃ€ŃƒĐłĐ°ŃĐœŃ‹ĐŒ ĐșĐ°ĐœĐ°Đ»Đ” IDE\n"
-" * \"d\" \"slave\" ĐœĐ° ĐŽŃ€ŃƒĐłĐ°ŃĐœŃ‹ĐŒ ĐșĐ°ĐœĐ°Đ»Đ” IDE\n"
-"\n"
-"\n"
-"Đ”Đ»Ń SCSI ЮысĐșаў - \"a\" гэта \"ĐżĐ”Ń€ŃˆĐ°ŃĐœŃ‹ Đ¶ĐŸŃ€ŃĐșі ЮысĐș\", \"b\" - \"ĐŽŃ€ŃƒĐłĐ°ŃĐœŃ‹ "
-"Đ¶ĐŸŃ€ŃĐșі ЮысĐș\", і Đł.ĐŽ.\n"
-"\n"
-"\"Windows Đ†ĐŒŃ\" ŃŃ–ĐŒĐČĐ°Đ» ĐČашага ЮысĐșу ў Windows (ĐżĐ”Ń€ŃˆŃ‹ ЮысĐș ці\n"
-"разЎзДл ĐżĐ°Đ·ĐœĐ°Ń‡Đ°Đ”Ń†Ń†Đ° яĐș \"C:\")."
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
+"y coordinate of text box\n"
+"in number of characters"
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
+msgid "Enabling servers..."
msgstr ""
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"УсД разЎзДлы, яĐșія былі Ń‚ĐŸĐ»ŃŒĐșі ĐČŃ‹Đ·ĐœĐ°Ń‡Đ°ĐœŃ‹ паĐČŃ–ĐœĐœŃ‹ Đ±Ń‹Ń†ŃŒ\n"
-"Đ°ĐŽŃ„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœŃ‹ (Ń„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČаць - Đ·ĐœĐ°Ń‡Ń‹Ń†ŃŒ стĐČарыць фаĐčлаĐČаю ŃŃ–ŃŃ‚ŃĐŒŃƒ).\n"
-"\n"
-"\n"
-"ĐŁ Ń‚ĐŸĐč жа час, ĐČы ĐŒĐŸĐ¶Đ°Ń†Đ” ĐżĐ”Ń€Đ°Ń„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČаць ŃƒĐ¶ĐŸ Ń–ŃĐœŃƒŃŽŃ‡Ń‹Ń разЎзДлы, Đșаб сцёрці\n"
-"ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń яĐșія ŃĐœŃ‹ ŃžŃ‚Ń€Ń‹ĐŒĐ»Ń–ĐČаюць. Калі ĐČы жаЎаДцД Đ·Ń€Đ°Đ±Ń–Ń†ŃŒ гэта, Đ°Đ±ŃŃ€Ń‹Ń†Đ” "
-"разЎзДлы\n"
-"яĐșія жаЎаДцД Đ°ĐŽŃ„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČаць.\n"
-"\n"
-"\n"
-"ЗаўĐČажцД, ĐČы паĐČŃ–ĐœĐœŃ‹ ĐżĐ”Ń€Đ°Ń„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČаць усД стĐČĐŸŃ€Đ°ĐœŃ‹Ń разЎзДлы. Вы паĐČŃ–ĐœĐœŃ‹\n"
-"ĐżĐ”Ń€Đ°Ń„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČаць разЎзДлы, яĐșія ŃžŃ‚Ń€Ń‹ĐŒĐ»Ń–ĐČаюць апДрацыĐčĐœŃƒŃŽ ŃŃ–ŃŃ‚ŃĐŒŃƒ (тыпу \"/"
-"\",\n"
-"\"/usr\" ці \"/var\"), алД ĐœĐ” паĐČŃ–ĐœĐœŃ‹ ĐżĐ”Ń€Đ°Ń„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČаць разЎзДлы, яĐșія "
-"ŃƒŃ‚Ń€Ń‹ĐŒĐ»Ń–ĐČаюць\n"
-"ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń, яĐșія ĐČы жаЎаДцД Đ·Đ°Ń…Đ°ĐČаць (Đ·ĐČычаĐčĐœĐ° /home).\n"
-"\n"
-"\n"
-"Калі ласĐșĐ°, Đ±ŃƒĐŽĐ·Ń†Đ” ўĐČажліĐČыя, абіраючы разЎзДлы, Đ±ĐŸ ĐżĐ°ŃĐ»Ń Ń„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœŃ\n"
-"усД ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń Đ±ŃƒĐŽŃƒŃ†ŃŒ ĐœĐ”Đ·ĐČĐ°Ń€ĐŸŃ‚ĐœĐ° ĐČŃ‹ĐŽĐ°Đ»Đ”ĐœŃ‹Ń.\n"
-"\n"
-"\n"
-"ĐĐ°Ń†Ń–ŃĐœŃ–Ń†Đ” \"йаĐș\" Đșалі ĐČы ĐłĐ°Ń‚ĐŸĐČыя Ń„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČаць Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ń.\n"
-"\n"
-"\n"
-"ĐĐ°Ń†Ń–ŃĐœŃ–Ń†Đ” \"ĐĐŽĐŒĐ”ĐœĐ°\" Đșалі жаЎаДцД Đ°Đ±Ń€Đ°Ń†ŃŒ Ń–ĐœŃˆŃ‹Ń разЎзДлы ĐŽĐ»Ń "
-"ŃƒŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃĐČашаĐč\n"
-"ĐœĐŸĐČĐ°Đč апДрацыĐčĐœĐ°Đč ŃŃ–ŃŃ‚ŃĐŒŃ‹ Mandrake Linux."
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing test page(s)..."
+msgstr "ДруĐș тэстаĐČых ŃŃ‚Đ°Ń€ĐŸĐœĐ°Đș"
-#: ../../help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
+msgid "There is already a partition with mount point %s\n"
+msgstr "ĐŁĐ¶ĐŸ ёсць разЎзДл Đ· ĐżŃƒĐœĐșŃ‚Đ°ĐŒ ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ %s\n"
#: ../../help.pm:1
#, fuzzy, c-format
@@ -1789,51 +1752,49 @@ msgid ""
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
msgstr ""
"ĐŁ ĐłŃŃ‚Ń‹ĐŒ ĐżŃƒĐœĐșцД, ĐČы паĐČŃ–ĐœĐœŃ‹ Đ°Đ±Ń€Đ°Ń†ŃŒ ĐŽĐ·Đ” ĐœĐ° ĐČĐ°ŃˆŃ‹ĐŒ Đ¶ĐŸŃ€ŃĐșŃ–ĐŒ \n"
"ЮысĐșу ŃƒŃŃ‚Đ°Đ»ŃĐČаць апДрацыĐčĐœŃƒŃŽ ŃŃ–ŃŃ‚ŃĐŒŃƒ Mandrake Linux. Калі ЮысĐș пусты\n"
@@ -1894,171 +1855,120 @@ msgstr ""
" лёгĐșĐ° Đ·ĐłŃƒĐ±Ń–Ń†ŃŒ сĐČĐ°Đ” ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń. ĐąĐ°ĐŒŃƒ ĐœĐ” абіраĐčцД гэтую ĐŸĐżŃ†Ń‹ŃŽ Đșалі ĐČŃ‹ĐœĐ” ĐČДЎаДцД "
"ŃˆŃ‚ĐŸ Ń€ĐŸĐ±Ń–Ń†Đ”."
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Ukraine"
+msgstr "ĐŁĐșраiĐœŃĐși"
-#: ../../help.pm:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Application:"
+msgstr "Đ Đ°Đ·ĐŒĐ”Ń€ĐșĐ°ĐČĐ°ĐœĐœĐ”"
+
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "External ISDN modem"
+msgstr "ĐŁĐœŃƒŃ‚Ń€Đ°ĐœĐ°Ń ISDN Đșарта"
+
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
+msgid "if set to yes, report check result by mail."
msgstr ""
-#: ../../help.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
-msgstr ""
+msgid "Your choice? (default %s) "
+msgstr "Ваш ĐČыбар? (Đ·ĐŒĐŸŃžŃ‡Đ°ĐœĐœĐ” %s) "
-#: ../../help.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
+msgid "Trouble shooting"
msgstr ""
-#: ../../help.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid " / Region"
+msgstr "ĐŸĐ°ĐŒĐ”Ń€Ń‹ эĐșŃ€Đ°ĐœŃƒ"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
+"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
-"Test\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
"\n"
-"Options\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
-" You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
-#: ../../help.pm:1
-#, c-format
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
+"бэстаĐČыя ŃŃ‚Đ°Ń€ĐŸĐœĐși Đ°ĐŽĐżŃ€Đ°ŃžĐ»Đ”ĐœŃ‹ ĐŽŃĐŒĐ°ĐœŃƒ ЮруĐșу.\n"
+"ĐŸĐ”Ń€Đ°ĐŽ Ń‚Ń‹ĐŒ, яĐș ĐżŃ€Ń‹ĐœŃ‚ŃŃ€ Đ·Đ°ĐżŃ€Đ°Ń†ŃƒĐ”, ĐŒĐŸĐ¶Đ° праĐčсцi ĐżŃŃžĐœŃ‹ час.\n"
+"Статус ЮруĐșу:\n"
+"%s\n"
"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
-msgstr ""
+"ĐĐœ ĐżŃ€Đ°Ń†ŃƒĐ” ĐœĐ°Ń€ĐŒĐ°Đ»ŃŒĐœĐ°?"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
+msgid "daily"
msgstr ""
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "and one unknown printer"
+msgstr "IĐŒŃ ЮруĐșарĐși"
+
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "Ireland"
+msgstr "IŃĐ»Đ°ĐœĐŽŃĐși"
+
+#: ../../standalone/drakfloppy:1
+#, fuzzy, c-format
+msgid "kernel version"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ Đ· IĐœŃ‚ŃŃ€ĐœŃŃ‚Đ°ĐŒ"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid " Restore Configuration "
+msgstr "ĐšĐ°ĐœŃ„iгурацыя сДтĐși"
+
+#: ../../Xconfig/test.pm:1
+#, fuzzy, c-format
+msgid "Is this the correct setting?"
+msgstr "Гэта ĐŽĐ°ĐșĐ»Đ°ĐŽĐœĐ°?"
#: ../../help.pm:1
#, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
@@ -2073,6369 +1983,6304 @@ msgid ""
"installed and use the program described there to configure your connection."
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Wizard Configuration"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ°"
+
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
+msgid "Autoprobe"
+msgstr "ĐŃžŃ‚Đ°ĐżĐŸŃˆŃƒĐș"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
+msgid "Backup system files..."
msgstr ""
-#: ../../help.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
-msgstr ""
+msgid "Can't use broadcast with no NIS domain"
+msgstr "ĐĐ”ĐŒĐ°ĐłŃ‡Ń‹ĐŒĐ° ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць broadcast бДз ĐŽĐ°ĐŒĐ”ĐœĐ° NIS"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Removing printer \"%s\"..."
+msgstr "Чытаю базу ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń… ЮраĐčĐČĐ”Ń€ĐŸŃž CUPS"
+
+#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
+msgid "drakfloppy"
+msgstr "ĐĐŽĐœĐ°ŃžĐ»Đ”ĐœĐœĐ” Đ· ЮысĐșДты"
+
+#: ../../standalone/drakpxe:1
+#, c-format
msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"Please indicate where the auto_install.cfg file is located.\n"
"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
msgstr ""
-"ДалДĐč Đ°ĐŽĐ·ĐœĐ°Ń‡Đ°ĐœŃ‹ усД Ń–ŃĐœŃƒŃŽŃ‡Ń‹Ń разЎзДлы Linux, Đ·ĐœĐŸĐčĐŽĐ·Đ”ĐœŃ‹Ń ĐœĐ° ĐČĐ°ŃˆŃ‹ĐŒ ЮысĐșу,\n"
-" яĐșія Đ·Ń€ĐŸĐ±Đ»Đ”ĐœŃ‹ ĐŒĐ°ĐčŃŃ‚Ń€Đ°ĐŒ ĐČŃ‹Đ»ŃƒŃ‡ŃĐœĐœŃ ЮысĐșаў. Вы ĐŒĐŸĐ¶Đ°Ń†Đ” паĐșŃ–ĐœŃƒŃ†ŃŒ іх таĐș і "
-"ĐČыĐșарыстўĐČаць\n"
-" ЎалДĐč, Đ±ĐŸ ŃĐœŃ‹ ĐŽĐŸĐ±Ń€Đ° ĐżĐ°ĐŽŃ‹Ń…ĐŸĐŽĐ·ŃŃ†ŃŒ ĐŽĐ»Ń Đ·ĐČычаĐčĐœĐ°ĐłĐ° ĐČыĐșĐ°Ń€Ń‹ŃŃ‚Đ°ĐœĐœŃ. Калі ĐČы\n"
-" ŃžĐœĐŸŃŃ–Ń†Đ” Đ·ĐŒĐ”ĐœŃ‹, ĐČы паĐČŃ–ĐœĐœŃ‹, ĐČŃ‹Đ»ŃƒŃ‡Ń‹Ń†ŃŒ хаця разЎзДл (\"/\"). РабіцД\n"
-" разЎзДл ĐœĐ” ĐČĐ”Đ»ŃŒĐŒŃ– ĐŒĐ°Đ»Ń‹ĐŒ, Đ±ĐŸ ў Đ°ĐŽĐČĐ°Ń€ĐŸŃ‚ĐœŃ‹ĐŒ ĐČыпаЮĐșу ĐČы ĐœŃ Đ·ĐŽĐŸĐ»Đ”Đ”Ń†Đ” ŃƒŃŃ‚Đ°Đ»ŃĐČаць\n"
-" ЮастатĐșĐŸĐČĐ° ĐżŃ€Đ°ĐłŃ€Đ°ĐŒĐœĐ°ĐłĐ° Đ·Đ°Đ±Đ”ŃĐżŃŃ‡ŃĐœĐœŃ.Калі ĐČы жаЎаДцД Đ·Đ°Ń…Đ°ĐČаць ĐČашыя "
-"ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń\n"
-" ĐœĐ° Đ°ŃĐŸĐ±ĐœŃ‹ĐŒ разЎзДлД, ĐČы паĐČŃ–ĐœĐœŃ‹ Đ°Đ±Ń€Đ°Ń†ŃŒ ĐżŃƒĐœĐșт ĐŒĐ°ĐœŃ†Ń–Ń€Đ°ĐČĐ°ĐœĐœŃ \"/home\".\n"
-"\n"
-"ĐšĐŸĐ¶ĐœŃ‹ разЎзДл ĐżĐ°Đ·ĐœĐ°Ń‡Đ°ĐœŃ‹ ĐœĐ°ŃŃ‚ŃƒĐżĐœŃ‹ĐŒ Ń‡Ń‹ĐœĐ°ĐŒ \"Đ†ĐŒŃ\", \"ĐĄĐČĐŸĐčстĐČы\".\n"
-"\n"
-"\n"
-"\"Đ†ĐŒŃ\" ĐșĐ°ĐŽĐ°ĐČĐ°ĐœĐ° таĐș - \"тып ЮысĐșу\", \"ĐœŃƒĐŒĐ°Ń€ ЮысĐșу\", \"ĐœŃƒĐŒĐ°Ń€ Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ\" \n"
-"(ĐœĐ°ĐżŃ€Ń‹ĐșлаЎ, \"hda1\").\n"
-"\n"
-"\n"
-"\"бып ЮысĐșу\" ĐșĐ°ĐŽĐ°ĐČĐ°ĐœŃ‹ яĐș \"hd\", Đșалі гэта IDE, і \"sd\" Đșалі SCSI.\n"
-" * \"Đ°\" \"master\" ĐœĐ° ĐżĐ”Ń€ŃˆĐ°ŃĐœŃ‹ĐŒ ĐșĐ°ĐœĐ°Đ»Đ” IDE \n"
-" * \"b\" \"slave\" ĐœĐ° ĐżĐ”Ń€ŃˆĐ°ŃĐœŃ‹ĐŒ ĐșĐ°ĐœĐ°Đ»Đ” IDE\n"
-" * \"c\" \"master\" ĐœĐ° ĐŽŃ€ŃƒĐłĐ°ŃĐœŃ‹ĐŒ ĐșĐ°ĐœĐ°Đ»Đ” IDE\n"
-" * \"d\" \"slave\" ĐœĐ° ĐŽŃ€ŃƒĐłĐ°ŃĐœŃ‹ĐŒ ĐșĐ°ĐœĐ°Đ»Đ” IDE\n"
-"\n"
-"\n"
-"Đ”Đ»Ń SCSI ЮысĐșаў - \"a\" гэта \"ĐżĐ”Ń€ŃˆĐ°ŃĐœŃ‹ Đ¶ĐŸŃ€ŃĐșі ЮысĐș\", \"b\" - \"ĐŽŃ€ŃƒĐłĐ°ŃĐœŃ‹ "
-"Đ¶ĐŸŃ€ŃĐșі ЮысĐș\", і Đł.ĐŽ."
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
+msgid "information level that can be obtained through the cpuid instruction"
msgstr ""
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
+msgid "Peru"
msgstr ""
-#: ../../install2.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid " on device: %s"
+msgstr "Мыш: %s\n"
+
+#: ../../install_interactive.pm:1
#, c-format
-msgid "You must also format %s"
-msgstr ""
+msgid "Remove Windows(TM)"
+msgstr "Đ’Ń‹ĐŽĐ°Đ»iць Windows(TM)"
-#: ../../install2.pm:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr "ЗапусĐșĐ°Đ” i ĐżŃ€Ń‹ĐżŃ‹ĐœŃĐ” X Font Server пры Đ·Đ°ĐłŃ€ŃƒĐ·Ń†Ń‹ i ĐČыĐșĐ»ŃŽŃ‡ŃĐœĐœi."
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
msgstr ""
-#: ../../install_any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
+msgid "Select the font file or directory and click on 'Add'"
msgstr ""
-"ĐŸĐ°ĐŒŃ‹Đ»ĐșĐ°: ĐŽĐ»Ń стĐČĐ°Ń€ŃĐœĐœŃ ĐœĐŸĐČых фаĐčлаĐČых сiŃŃ‚ŃĐŒĐ°Ńž ĐœĐ” Đ·ĐœĐ°ĐčĐŽĐ·Đ”ĐœŃ‹ аЎпаĐČĐ”ĐŽĐœŃ‹Ń \n"
-"прылаЎы. ПраĐČДрцД Đ°Đ±ŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” ĐŽĐ»Ń ĐżĐŸŃˆŃƒĐșу iĐŒĐ°ĐČĐ”Ń€ĐœĐ°Đč ĐżŃ€Ń‹Ń‡Ń‹ĐœŃ‹."
-#: ../../install_any.pm:1 ../../partition_table.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Error reading file %s"
-msgstr "ĐŸĐ°ĐŒŃ‹Đ»ĐșĐ° Ń‡Ń‹Ń‚Đ°ĐœĐœŃ фаĐčлу %s"
+msgid "Madagascar"
+msgstr ""
-#: ../../install_any.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
+msgid "Urpmi"
msgstr ""
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This floppy is not FAT formatted"
+msgid "Cron not available yet as non-root"
msgstr ""
-#: ../../install_any.pm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "УстаўцД ЮысĐșĐ”Ń‚Ńƒ ў ЮысĐșĐ°ĐČĐŸĐŽ %s"
+msgid "System"
+msgstr "Mouse Systems"
-#: ../../install_any.pm:1
-#, c-format
-msgid "Can't use broadcast with no NIS domain"
-msgstr "ĐĐ”ĐŒĐ°ĐłŃ‡Ń‹ĐŒĐ° ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць broadcast бДз ĐŽĐ°ĐŒĐ”ĐœĐ° NIS"
+#: ../../any.pm:1 ../../help.pm:1
+#, fuzzy, c-format
+msgid "Do you want to use this feature?"
+msgstr "Вы жаЎаДцД ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць aboot?"
-#: ../../install_any.pm:1
+#: ../../keyboard.pm:1
#, c-format
+msgid "Arabic"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
"\n"
-"Do you really want to remove these packages?\n"
+"- Options:\n"
+msgstr "Опцыi"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Password required"
+msgstr "ĐŸĐ°Ń€ĐŸĐ»ŃŒ"
+
+#: ../../common.pm:1
+#, c-format
+msgid "%d minutes"
+msgstr "%d хĐČiĐ»iĐœ"
+
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Graphics card: %s"
+msgstr "ВiЮэаĐșарта: %s"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "WebDAV transfer failed!"
msgstr ""
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "No"
-msgstr "ĐĐ”"
+msgid "XFree configuration"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° XFree"
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Yes"
-msgstr "йаĐș"
+msgid "Choose action"
+msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” ĐŽĐ·Đ”ŃĐœĐœĐ”"
-#: ../../install_any.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "French Polynesia"
+msgstr ""
+
+#: ../../help.pm:1
#, c-format
msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
"\n"
-"Do you really want to install these servers?\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
msgstr ""
-#: ../../install_gtk.pm:1
-#, fuzzy, c-format
-msgid "System configuration"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ°"
-
-#: ../../install_gtk.pm:1
-#, fuzzy, c-format
-msgid "System installation"
-msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” SILO"
-
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Bringing down the network"
-msgstr "ĐĐŽĐ»ŃƒŃ‡ŃĐœĐœĐ” Đ°ĐŽ сДтĐși"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Bringing up the network"
-msgstr "Đ”Đ°Đ»ŃƒŃ‡ŃĐœĐœĐ” ĐŽĐ° сДтĐși"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr ""
-#: ../../install_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Partitioning failed: %s"
-msgstr "ĐŸĐ°ĐŽŃ€Ń‹Ń…Ń‚ĐŸŃžĐșĐ° разЎДлаў ĐœĐ” ŃžĐŽĐ°Đ»Đ°ŃŃ: %s"
+msgid "Installing driver for %s card %s"
+msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” ЮраĐčĐČĐ”Ń€Ńƒ ĐŽĐ»Ń %s Đșарты %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "МаĐčстар ĐżĐ°ĐŽŃ€Ń‹Ń…Ń‚ĐŸŃžĐși разЎзДлаў DrakX Đ·ĐœĐ°ĐčŃˆĐŸŃž ĐœĐ°ŃŃ‚ŃƒĐżĐœŃ‹Ń ĐČĐ°Ń€Ń‹ŃĐœŃ‚Ń‹:"
+msgid ""
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "I can't find any room for installing"
-msgstr "ДаЮаць разЎзДл ĐœĐ”ĐŒĐ°ĐłŃ‡Ń‹ĐŒĐ°"
+msgid "Enable Server"
+msgstr "ХДрĐČДр ЮруĐșу"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Вы ĐŒĐŸĐ¶Đ°Ń†Đ” Ń†ŃĐżĐ”Ń€ разбiць ĐČаш ЮысĐș %s\n"
-"Па Đ·Đ°ĐșĐ°ĐœŃ‡ŃĐœĐœi ĐœĐ” Đ·Đ°Đ±ŃƒĐŽĐ·ŃŒŃ†Đ”ŃŃ Đ·Đ°Ń…Đ°ĐČаць Đ·ĐŒŃĐœĐ”ĐœĐœi, сĐșарыстаўшы `w'"
+msgid "Ukrainian"
+msgstr "ĐŁĐșраiĐœŃĐși"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use fdisk"
-msgstr "ВыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць fdisk"
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Custom disk partitioning"
-msgstr "ВыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць iŃĐœŃƒŃŽŃ‡Ń‹ разЎзДл"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "УстаўцД ЮысĐșĐ”Ń‚Ńƒ ў ЮысĐșĐ°ĐČĐŸĐŽ %s"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "УсД iŃĐœŃƒŃŽŃ‡Ń‹Ń разЎзДлы ĐœĐ° ЮысĐșу %s i ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń ĐœĐ° iх Đ±ŃƒĐŽŃƒŃ†ŃŒ ŃŃ‚Ń€Đ°Ń‡Đ°ĐœŃ‹"
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Local network(s)"
+msgstr "сДтĐșĐ°ĐČая Đșарта ĐœĐ” Đ·ĐœĐŸĐčĐŽĐ·Đ”ĐœĐ°"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "На яĐși Đ· ĐŒĐ°ŃŽŃ‡Ń‹Ń…ŃŃ Đ¶ĐŸŃ€ŃŃ‚Đșiх ЮысĐșаў Вы жаЎаДцД ŃžŃŃ‚Đ°Đ»ŃĐČаць Linux?"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
+msgstr "Đ’Ń‹ĐŽĐ°Đ»iць Windows(TM)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Erase entire disk"
-msgstr "Сцёрцi ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń ĐœĐ° ўсiĐŒ ЮысĐșу"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Đ’Ń‹ĐŽĐ°Đ»iць Windows(TM)"
+msgid "Firewire controllers"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
+msgid ""
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
+"\n"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
msgstr ""
-"ĐĐ” Đ·ĐœĐŸĐčĐŽĐ·Đ”ĐœĐ° разЎзДлаў FAT ĐŽĐ»Ń Đ·ĐŒŃĐœĐ”ĐœĐœŃ ĐżĐ°ĐŒĐ”Ń€Đ°Ńž Đ°Đ»ŃŒĐ±ĐŸ ĐČыĐșĐ°Ń€Ń‹ŃŃ‚Đ°ĐœĐœŃ\n"
-"ў яĐșасцi ĐČiŃ€Ń‚ŃƒĐ°Đ»ŃŒĐœĐ°Đč фаĐčлаĐČĐ°Đč сiŃŃ‚ŃĐŒŃ‹ (цi ĐœĐ”ĐŽĐ°ŃŃ‚Đ°Ń‚ĐșĐŸĐČĐ° ĐżŃ€Đ°ŃŃ‚ĐŸŃ€Ń‹ ĐœĐ° ЮысĐșу)"
+"LILO (Đ°ĐŽ LInux LOader) i Grub - гэта Đ·Đ°ĐłŃ€ŃƒĐ·Ń‡Ń‹Đși. ĐŻĐœŃ‹ ĐŒĐŸĐłŃƒŃ†ŃŒ Đ·Đ°ĐłŃ€ŃƒĐ·iць "
+"Юругую\n"
+"GNU/Linux цi Đ»ŃŽĐ±ŃƒŃŽ iĐœŃˆŃƒŃŽ апДрацыĐčĐœŃƒŃŽ сiŃŃ‚ŃĐŒŃƒ, ŃƒŃŃ‚Đ°Đ»ŃĐČĐ°ĐœŃƒŃŽ ĐœĐ° ĐșĐ°ĐŒĐżŃƒŃ‚Đ°Ń€Ń‹.\n"
+"ЗĐČычаĐčĐœĐ°, гэтыя iĐœŃˆŃ‹Ń апДрацыĐčĐœŃ‹Ń сiŃŃ‚ŃĐŒŃ‹ ĐșарэĐșŃ‚ĐœĐ° ĐČŃ‹Đ·ĐœĐ°Ń‡Đ°ŃŽŃ†Ń†Đ° i\n"
+"ўсталёўĐČаюцца. Калi гэта ĐœĐ” Đ°Ń‚Ń€Ń‹ĐŒĐ°Đ»Đ°ŃŃ, Ń‚ĐŸ ĐČы ĐŒĐŸĐ¶Đ°Ń†Đ” ЮаЮаць любы Đ·Đ°Đżiс\n"
+"ŃĐ°ĐŒĐ°ŃŃ‚ĐŸĐčĐœĐ°. Đ‘ŃƒĐŽĐ·ŃŒŃ†Đ” ŃžĐżŃŃžĐœĐ”ĐœŃ‹, ŃˆŃ‚ĐŸ ĐČы Đ·Đ°ĐŽĐ°Đ»i ĐșарэĐșŃ‚ĐœŃ‹Ń ĐżĐ°Ń€Đ°ĐŒĐ”Ń‚Ń€Ń‹.\n"
+"\n"
+"\n"
+"йаĐșŃĐ°ĐŒĐ° ĐČы ĐŒĐŸĐ¶Đ°Ń†Đ” ĐżĐ°Đ¶Đ°ĐŽĐ°Ń†ŃŒ i ĐœĐ” ĐŽĐ°Đ±Đ°ŃžĐ»ŃŃ†ŃŒ iĐœŃˆŃ‹Ń апДрацыĐčĐœŃ‹Ń сiŃŃ‚ŃĐŒŃ‹.\n"
+"ĐŁ таĐșiĐŒ ĐČыпаЮĐșу ĐżĐ°Ń‚Ń€ŃĐ±ĐœĐ° ĐČŃ‹ĐŽĐ°Đ»iць аЎпаĐČĐ”ĐŽĐœŃ‹Ń Đ·Đ°Đżiсы. АлД ж таЮы ĐČĐ°ĐŒ \n"
+"ĐżĐ°Ń‚Ń€ŃĐ±ĐœĐ° буЎзД Đ·Đ°ĐłŃ€ŃƒĐ·Đ°Ń‡ĐœĐ°Ń ЮысĐșДта, Đșаб Đ·Đ°ĐłŃ€ŃƒĐ·iцца!"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
+msgid "System mode"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
msgstr ""
+"Đ”Đ»Ń ЮруĐșу ĐœĐ° ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ń‹ NetWare ĐœĐ”Đ°Đ±Ń…ĐŸĐŽĐœĐ° ĐżĐ°Đ·ĐœĐ°Ń‡Ń‹Ń†ŃŒ iĐŒŃ сДрĐČĐ”Ń€Ńƒ ЮруĐșу NetWare "
+"(ĐœĐ” заўсёЎы супаЎаД Đ· iĐŒĐ”ĐœĐ”ĐŒ у сДтцы TCP/IP) i iĐŒŃ чаргi ЮруĐșу, яĐșая "
+"аЎпаĐČŃĐŽĐ°Đ” Đ°Đ±Ń€Đ°ĐœĐ°ĐŒŃƒ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ, Đ° таĐșŃĐ°ĐŒĐ° iĐŒŃ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșу i ĐżĐ°Ń€ĐŸĐ»ŃŒ."
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "ĐŃžŃ‚Đ°Đ·ĐŒŃĐœĐ”ĐœĐœĐ” ĐżĐ°ĐŒĐ”Ń€Đ°Ńž ĐœĐ” Đ°Ń‚Ń€Ń‹ĐŒĐ°Đ»Đ°ŃŃ ĐŽĐ»Ń Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ FAT %s"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Netmask:"
+msgstr "МасĐșĐ° сДтĐși"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Resizing Windows partition"
-msgstr "Đ’Ń‹Đ»iŃ‡ŃĐœĐœĐ” ĐŒĐ”Đ¶Đ°Ńž фаĐčлаĐČĐ°Đč сiŃŃ‚ŃĐŒŃ‹ Windows"
+msgid "Append"
+msgstr "Đ”Đ°Đ»ŃƒŃ‡Ń‹Ń†ŃŒ"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Resizing"
-msgstr "Đ—ĐŒŃĐœĐ”ĐœĐœĐ” ĐżĐ°ĐŒĐ”Ń€Đ°Ńž"
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "partition %s"
-msgstr "РазЎзДл %s"
+msgid ""
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
+"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
+"\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
+"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
+"\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "ĐŻĐșую ĐżŃ€Đ°ŃŃ‚ĐŸŃ€Ńƒ Đ·Đ°Ń…Đ°ĐČаць ĐŽĐ»Ń Windows?"
-
-#: ../../install_interactive.pm:1
-#, fuzzy, c-format
msgid ""
-"WARNING!\n"
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"УВАГА!\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
-"DrakX зараз паĐČiĐœĐ”Đœ Đ·ĐŒŃĐœiць ĐżĐ°ĐŒĐ”Ń€ ĐČашага разЎзДла Windows.\n"
-"Đ‘ŃƒĐŽĐ·ŃŒŃ†Đ” ўĐČажлiĐČы: гэтая Đ°ĐżĐ”Ń€Đ°Ń†Ń‹Ń ĐœĐ”Đ±ŃŃĐżĐ”Ń‡ĐœĐ°. Калi ĐČы яшчэ ĐœĐ” зрабiĐ»i \n"
-"Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČую ĐșĐŸĐżiю ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń…, Ń‚ĐŸ спачатĐșу паĐșiĐœŃŒŃ†Đ” ĐżŃ€Đ°ĐłŃ€Đ°ĐŒŃƒ ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ,"
-"ĐČыĐșĐ°ĐœĐ°ĐčцД scandisk i defrag ĐœĐ° ĐłŃŃ‚Ń‹ĐŒ разЎДлД, зрабiцД Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČую ĐșĐŸĐżiю\n"
-"ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń… i Ń‚ĐŸĐ»ŃŒĐși ĐżĐŸŃ‚Ń‹ĐŒ Đ·ĐœĐŸŃž ĐČŃŃ€ĐœiŃ†Đ”ŃŃ ĐŽĐ° ĐżŃ€Đ°ĐłŃ€Đ°ĐŒŃ‹ ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ.\n"
-"Калi паЮрыхтаĐČĐ°Đ»iся, ĐœĐ°Ń†iŃĐœiцД Ok."
+"It also provides a much higher API than OSS.\n"
+"\n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
+"\n"
+"You may prefer to replay the installation.\n"
msgstr ""
-"Ваш разЎзДл Đ· Windows Đ·Đ°ĐœĐ°ĐŽŃ‚Đ° Ń„Ń€Đ°ĐłĐŒĐ”ĐœŃ‚Đ°ĐČĐ°ĐœŃ‹. \n"
-"РэĐșĐ°ĐŒĐ”ĐœĐŽŃƒĐ”ĐŒ спачатĐșу Đ·Đ°ĐżŃƒŃŃ†iць ĐżŃ€Đ°ĐłŃ€Đ°ĐŒŃƒ ``defrag''"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "ВыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць ĐœĐ”Đ·Đ°ĐœŃŃ‚ŃƒŃŽ ĐżŃ€Đ°ŃŃ‚ĐŸŃ€Ńƒ ĐœĐ° разЎзДлД Windows"
+msgid "Network printer \"%s\", port %s"
+msgstr "ХДтĐșĐ°ĐČы ĐżŃ€Ń‹ĐœŃ‚ŃŃ€ (TCP/Socket)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
msgstr ""
-"ĐŁ ĐżŃ€Đ°ĐłŃ€Đ°ĐŒŃ‹ Đ·ĐŒĐ”ĐœŃ‹ ĐżĐ°ĐŒĐ”Ń€Đ°Ńž разЎзДла FAT ĐœĐ” Đ°Ń‚Ń€Ń‹ĐŒĐ°Đ»Đ°ŃŃ\n"
-"апрацаĐČаць Ваш разЎзДл, ĐżĐ°ĐŒŃ‹Đ»ĐșĐ°: %s"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "ĐŸĐ°ĐŒĐ”Ń€Ń‹ яĐșĐŸĐłĐ° разЎзДла ĐČы жаЎаДцД Đ·ĐŒŃĐœiць?"
+"Калi ласĐșĐ°, Đ°Đ±ŃŃ€Ń‹Ń†Đ” сДтĐșĐ°ĐČы аЮаптар, яĐșі буЎзД ĐČыĐșĐ°Ń€Ń‹ŃŃ‚Đ°ĐœŃ‹ ĐŽĐ»Ń ĐŽĐ°Đ»ŃƒŃ‡ŃĐœĐœŃ ĐŽĐ° "
+"ĐČашаĐč лаĐșĐ°Đ»ŃŒĐœĐ°Đč сДтĐși."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "ВыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць ĐœĐ”Đ·Đ°ĐœŃŃ‚ŃƒŃŽ ĐżŃ€Đ°ŃŃ‚ĐŸŃ€Ńƒ ĐœĐ° разЎзДлД Windows"
+msgid "OK to restore the other files."
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"ĐĐ” Đ·ĐœĐŸĐčĐŽĐ·Đ”ĐœĐ° разЎзДлаў FAT ĐŽĐ»Ń Đ·ĐŒŃĐœĐ”ĐœĐœŃ ĐżĐ°ĐŒĐ”Ń€Đ°Ńž Đ°Đ»ŃŒĐ±ĐŸ ĐČыĐșĐ°Ń€Ń‹ŃŃ‚Đ°ĐœĐœŃ\n"
-"ў яĐșасцi ĐČiŃ€Ń‚ŃƒĐ°Đ»ŃŒĐœĐ°Đč фаĐčлаĐČĐ°Đč сiŃŃ‚ŃĐŒŃ‹ (цi ĐœĐ”ĐŽĐ°ŃŃ‚Đ°Ń‚ĐșĐŸĐČĐ° ĐżŃ€Đ°ŃŃ‚ĐŸŃ€Ń‹ ĐœĐ° ЮысĐșу)"
+msgid "Please choose your keyboard layout."
+msgstr "Калi ласĐșĐ°, Đ°Đ±ŃŃ€Ń‹Ń†Đ” тып ĐșлаĐČiятуры."
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Swap partition size in MB: "
-msgstr "ĐŸĐ°ĐŒĐ”Ń€ swap Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ ў Mб:"
+msgid "Printer Device URI"
+msgstr "URI ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Root partition size in MB: "
-msgstr "ĐšĐ°Ń€Đ°ĐœŃ‘ĐČы разЎзДл ў Mб: "
+msgid "Not erasable media!"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Choose the sizes"
-msgstr "Выбар ĐżĐ°ĐŒĐ”Ń€Đ°Ńž"
-
-#: ../../install_interactive.pm:1
-#, fuzzy, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "ĐŸĐ°ĐŒĐ”Ń€Ń‹ яĐșĐŸĐłĐ° разЎзДла ĐČы жаЎаДцД Đ·ĐŒŃĐœiць?"
+msgid "Terminal-based"
+msgstr "ĐœĐ° Đ°ŃĐœĐŸĐČĐ” Ń‚ŃŃ€ĐŒiĐœĐ°Đ»Ńƒ"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "ВыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць разЎзДл Windows ĐŽĐ»Ń ĐČiŃ€Ń‚ŃƒĐ°Đ»ŃŒĐœĐ°Đč фаĐčлаĐČĐ°Đč сiŃŃ‚ŃĐŒŃ‹"
+msgid "Installing a printing system in the %s security level"
+msgstr ""
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "There is no existing partition to use"
-msgstr "ĐŃĐŒĐ° iŃĐœŃƒŃŽŃ‡Ń‹Ń… разЎзДлаў, яĐșiя ĐŒĐŸĐ¶ĐœĐ° ĐČыĐșарыстаць"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "The user name is too long"
+msgstr "Гэта iĐŒŃ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșу ŃžĐ¶ĐŸ ĐŽĐ°ĐŽĐ°ĐŽĐ·Đ”ĐœĐ°"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Use existing partitions"
-msgstr "ВыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць iŃĐœŃƒŃŽŃ‡Ń‹ разЎзДл"
+msgid "Other OS (windows...)"
+msgstr "IĐœŃˆĐ°Ń АХ (windows...)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "ĐĐ” хапаД ĐżŃ€Đ°ŃŃ‚ĐŸŃ€Ń‹ ĐŽĐ»Ń стĐČĐ°Ń€ŃĐœĐœŃ ĐœĐŸĐČых разЎзДлаў"
+msgid "WebDAV remote site already in sync!"
+msgstr ""
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use free space"
-msgstr "ВыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць ĐœĐ”Đ·Đ°ĐœŃŃ‚ŃƒŃŽ ĐżŃ€Đ°ŃŃ‚ĐŸŃ€Ńƒ"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Reading printer database..."
+msgstr "Чытаю базу ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń… ЮраĐčĐČĐ”Ń€ĐŸŃž CUPS"
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Вы паĐČiĐœĐœŃ‹ ĐŒĐ”Ń†ŃŒ разЎзДл swap"
+msgid "Generate auto install floppy"
+msgstr "СтĐČĐ°Ń€ŃĐœĐœĐ” ЮысĐșДты ĐŽĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You don't have a swap partition.\n"
-"\n"
-"Continue anyway?"
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
msgstr ""
-"ĐŃĐŒĐ° разЎзДла swap.\n"
-"\n"
-"Усё Đ°ĐŽĐœĐŸ працягĐČаць?"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Вы паĐČiĐœĐœŃ‹ ĐŒĐ”Ń†ŃŒ ĐșĐ°Ń€Đ°ĐœŃ‘ĐČы разЎзДл.\n"
-"Đ”Đ»Ń гэтага стĐČарыцД разЎзДл (Đ°Đ»ŃŒĐ±ĐŸ Đ°ĐŽĐ·ĐœĐ°Ń‡Ń†Đ” ŃžĐ¶ĐŸ iŃĐœŃƒŃŽŃ‡Ń‹).\n"
-"ĐŸĐŸŃ‚Ń‹ĐŒ Đ°Đ±ŃŃ€Ń‹Ń†Đ” ``ĐšŃ€ĐŸĐżĐșĐ° ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ'' i ŃžŃŃ‚Đ°ĐœĐ°ĐČiцД ŃĐ” ў `/'"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Somalia"
+msgstr "NIS Domain"
-#: ../../install_interactive.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
+msgid "No open source driver"
msgstr ""
-"ĐŸŃŃžĐœĐ°Đ” Đ°Đ±ŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” ĐżĐ°Ń‚Ń€Đ°Đ±ŃƒĐ” ĐșĐ°ĐŒĐ”Ń€Ń†Ń‹ĐčĐœŃ‹Ń… ЮраĐčĐČДраў ĐŽĐ»Ń працы.\n"
-"ЧастĐșĐŸĐČĐ° Ń–ĐœŃ„Đ°Ń€ĐŒĐ°Ń†Ń‹ŃŽ пра іх ĐŒĐŸĐ¶ĐœĐ° Đ°Ń‚Ń€Ń‹ĐŒĐ°Ń†ŃŒ тут: %s"
-#: ../../install_messages.pm:1
-#, c-format
+#: ../../security/level.pm:1
+#, fuzzy, c-format
msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
msgstr ""
-"ВiĐœŃˆŃƒĐ”ĐŒ, ŃƒŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” Đ·Đ°ĐČĐ”Ń€ŃˆĐ°ĐœĐ°.\n"
-"Đ’Ń‹ĐŽĐ°Đ»iцД Đ·Đ°ĐłŃ€ŃƒĐ·Đ°Ń‡ĐœŃ‹ ЮысĐș i ĐœĐ°Ń†iŃĐœiцД enter ĐŽĐ»Ń ĐżĐ”Ń€Đ°Đ·Đ°ĐłŃ€ŃƒĐ·Đși.\n"
-"\n"
-"\n"
-"За iĐœŃ„Đ°Ń€ĐŒĐ°Ń†Ń‹ŃĐč пра Đ·ĐŒŃĐœĐ”ĐœĐœi ĐŽĐ°ĐŽĐ·Đ”ĐœĐ°ĐłĐ° ĐČыпусĐșу Mandrake Linux,\n"
-"Đ·ĐČяртаĐčŃ†Đ”ŃŃŒ ĐœĐ° \n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"IĐœŃ„Đ°Ń€ĐŒĐ°Ń†Ń‹Ń па ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ” ĐČашаĐč сiŃŃ‚ŃĐŒŃ‹ ёсть ў ĐżĐ°ŃĐ»Ń-ўсталёĐČĐ°Ń‡ĐœĐ°Đč\n"
-"глаĐČĐ” ĐČашага Đ”Đ°ĐżĐ°ĐŒĐŸĐ¶ĐœiĐșĐ° ĐšĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșу Đ· АфiцыĐčĐœĐ°ĐłĐ° Mandrake Linux."
+"ĐŸŃ€Ń‹ĐŒĐ°ŃŽŃ†Ń†Đ° ўласцiĐČасцi 4 ŃƒĐ·Ń€ĐŸŃžĐœŃ, алД зараз сiŃŃ‚ŃĐŒĐ° ĐżĐŸŃžĐœĐ°ŃŃ†ŃŽ Đ·Đ°Ń‡Ń‹ĐœĐ”ĐœĐ°.\n"
+"ĐŸĐ°Ń€Đ°ĐŒĐ”Ń‚Ń€Ń‹ Đ±ŃŃĐżĐ”Đși ŃžŃŃ‚Đ°ĐœĐŸŃžĐ»Đ”ĐœŃ‹ ĐœĐ° ĐŒĐ°ĐșсiĐŒŃƒĐŒ."
-#: ../../install_messages.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgid "Nicaragua"
msgstr ""
-#: ../../install_messages.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
+msgid "New Caledonia"
msgstr ""
-#: ../../install_messages.pm:1
-#, c-format
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-msgstr ""
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "European protocol (EDSS1)"
+msgstr "Đ•ŃžŃ€ĐŸĐżĐ° (EDSS1)"
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Entering step `%s'\n"
-msgstr "ĐŸĐ”Ń€Đ°Ń…ĐŸĐŽ ĐœĐ° ĐșŃ€ĐŸĐș `%s'\n"
+msgid "Video mode"
+msgstr "ВiЮэа-Ń€ŃĐ¶Ń‹ĐŒ"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Please enter your email address below "
+msgstr "ĐŸĐ°ŃĐżŃ€Đ°Đ±ŃƒĐčцД яшчэ раз"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Oman"
+msgstr "NIS Domain"
+
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Network Monitoring"
+msgstr "ĐšĐ°ĐœŃ„iгурацыя сДтĐși"
+
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Help"
-msgstr "Đ”Đ°ĐżĐ°ĐŒĐŸĐłĐ°"
+msgid "SunOS"
+msgstr "SunOS"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "not configured"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° X Window"
+msgid "New size in MB: "
+msgstr "ĐŸĐ°ĐŒĐ”Ń€ у ĐœĐ±:"
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Partition table type: %s\n"
+msgstr "бып таблiцы разЎзДлаў: %s\n"
+
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Configure"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° X Window"
+msgid "Authentication Windows Domain"
+msgstr "ĐŃžŃ‚ŃĐœŃ‚Ń‹Ń„iĐșацыя"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Go on anyway?"
-msgstr "Усё Ń€ĐŸŃžĐœĐ° працягĐČаць?"
+msgid "US keyboard"
+msgstr "US ĐșлаĐČiятура"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "There was an error installing packages:"
-msgstr "ĐŃ‚Ń€Ń‹ĐŒĐ°Đ»Đ°ŃŃ ĐżĐ°ĐŒŃ‹Đ»ĐșĐ° ўпараЮĐșĐ°ĐČĐ°ĐœĐœŃ паĐșДтаў:"
+msgid "Buttons emulation"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "There was an error ordering packages:"
-msgstr "ĐŃ‚Ń€Ń‹ĐŒĐ°Đ»Đ°ŃŃ ĐżĐ°ĐŒŃ‹Đ»ĐșĐ° ўпараЮĐșĐ°ĐČĐ°ĐœĐœŃ паĐșДтаў:"
+msgid ", network printer \"%s\", port %s"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Change your Cd-Rom!\n"
"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Đ—ĐŒŃĐœiцД ĐČаш Cd-Rom!\n"
+"Drakbackup activities via tape:\n"
"\n"
-"Калi ласĐșĐ°, ŃƒŃŃ‚Đ°ŃžŃ†Đ” Cd-Rom, ĐżĐ°Đ·ĐœĐ°Ń‡Đ°ĐœŃ‹ \"%s\", у ĐČаш ЮысĐșĐ°ĐČĐŸĐŽ i ĐœĐ°Ń†iŃĐœiцД OĐș "
-"ĐżĐ°ŃĐ»Ń.\n"
-"Калi ĐČы ĐœĐ” ĐŒĐ°Đ”Ń†Đ” ŃĐłĐŸ, ĐœĐ°Ń†iŃĐœiцД ĐĐŽĐŒŃĐœiць, Đșаб Đ°ĐŽĐŒŃĐœiць ŃƒŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” Đ· гэтага "
-"Cd."
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Refuse"
-msgstr "АЎĐșĐ°Đ·Đ°Ń†ŃŒ"
+msgid ""
+"\n"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Accept"
-msgstr "ĐŸŃ€Ń‹ĐœŃŃ†ŃŒ"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Sending Speed:"
+msgstr "ЗахаĐČĐ°ĐœĐœĐ” ў фаĐčĐ»"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Installing package %s"
-msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” паĐșĐ”Ń‚Ńƒ %s"
+msgid "Halt bug"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Mail alert configuration"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ADSL"
+
+#: ../../lang.pm:1
#, c-format
-msgid "%d packages"
-msgstr "%d паĐșДтаў"
+msgid "Tokelau"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "No details"
-msgstr "ĐŸĐ°ĐŽŃ€Đ°Đ±ŃĐ·ĐœĐ°ŃŃ†i"
+msgid "Bosnian"
+msgstr "Đ­ŃŃ‚ĐŸĐœŃĐși"
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Details"
-msgstr "ĐŸĐ°ĐŽŃ€Đ°Đ±ŃĐ·ĐœĐ°ŃŃ†i"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Release: "
+msgstr "Калi ласĐșĐ°, пачаĐșĐ°ĐčцД"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Please wait, preparing installation..."
-msgstr "ĐŸĐ°ĐŽŃ€Ń‹Ń…Ń‚ĐŸŃžĐșĐ° ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœŃŒĐœŃ"
+msgid "Connection speed"
+msgstr "IĐŒŃ Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Time remaining "
-msgstr "Đ—Đ°ŃŃ‚Đ°Đ»ĐŸŃŃ часу "
+msgid ""
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Estimating"
-msgstr "ЧаĐșаДцца"
+msgid "Namibia"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Database Server"
+msgstr "ХДрĐČДр ЮруĐșу"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Installing"
-msgstr "УсталёўĐČĐ°Đ”ĐŒ"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Выбар паĐșДтаў ĐŽĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "ĐĐ” Đ°Ń‚Ń€Ń‹ĐŒĐ»iĐČаДцца ЮаЮаць разЎзДл ĐœĐ° _Đ°ĐŽŃ„Đ°Ń€ĐŒĐ°Ń†iраĐČĐ°ĐœŃ‹_ RAID md%d"
-#: ../../install_steps_gtk.pm:1
-#, fuzzy, c-format
-msgid "Minimal install"
-msgstr "Đ’Ń‹ĐŽĐ°Đ»iць Đ· сiŃŃ‚ŃĐŒŃ‹"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
+msgstr ""
+"Ваша ĐČiЮэаĐșарта ĐŒĐŸĐ¶Đ° ĐŒĐ”Ń†ŃŒ 3D-пасĐșĐ°Ń€ŃĐœĐœĐ”, яĐșĐŸĐ” ĐżĐ°ĐŽŃ‚Ń€Ń‹ĐŒĐ»iĐČаДцца Ń‚ĐŸĐ»ŃŒĐși XFree %"
+"s.\n"
+"МАЙЩЕ НА ЎВАЗЕ, йбО ГЭбА Đ­ĐšĐĄĐŸĐ•Đ Đ«ĐœĐ•ĐĐąĐĐ›ĐŹĐĐĐŻ ĐŸĐĐ”ĐąĐ Đ«ĐœĐšĐ I МОЖА ĐŸĐ Đ«Đ’Đ•ĐĄĐŠI ДА\n"
+"ЗАВIСАННЯ ВАйАГА КАМП'ПйЭРУ. Ваша ĐČiЮэаĐșарта ĐżĐ°ĐŽŃ‚Ń€Ń‹ĐŒĐ»iĐČаДцца XFree %s, яĐși\n"
+"лДпДĐč ĐżĐ°ĐŽŃ‚Ń€Ń‹ĐŒĐ»iĐČĐ°Đ” Đșарты Đ· 2D-пасĐșĐ°Ń€ŃĐœĐœĐ”ĐŒ."
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "Updating package selection"
-msgstr "Асабiсты ĐČыбар паĐșДтаў"
+msgid "Please wait, setting security options..."
+msgstr "ĐŸĐ°ĐŽŃ€Ń‹Ń…Ń‚ĐŸŃžĐșĐ° ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœŃŒĐœŃ"
-#: ../../install_steps_gtk.pm:1
-#, fuzzy, c-format
-msgid "Load/Save on floppy"
-msgstr "ЗахаĐČĐ°ĐœĐœĐ” ĐœĐ° ЮысĐșĐ”Ń‚Ńƒ"
+#: ../../harddrake/v4l.pm:1
+#, c-format
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "<- Previous"
+msgid "Launch the graphical environment when your system starts"
msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Install"
-msgstr "УсталёўĐșĐ°"
+msgid "hourly"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Show automatically selected packages"
+msgid " Successfuly Restored on %s "
msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Вы ĐœĐ” ĐŒĐŸĐ¶Đ°Ń†Đ” Đ°ĐŽĐŒŃĐœiць ĐČŃ‹Đ»ŃƒŃ‡ŃĐœĐœĐ” гэтага паĐșĐ”Ń‚Ńƒ. ĐŻĐłĐŸ ĐżĐ°Ń‚Ń€ŃĐ±ĐœĐ° Đ°Đ±ĐœĐ°ĐČiць"
+msgid "Making printer port available for CUPS..."
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Antigua and Barbuda"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""
-"Гэты паĐșДт паĐČiĐœĐ”Đœ Đ±Ń‹Ń†ŃŒ Đ°Đ±ĐœĐŸŃžĐ»Đ”ĐœŃ‹\n"
-"Вы ŃžĐżŃŃžĐœĐ”ĐœŃ‹, ŃˆŃ‚ĐŸ Ń…ĐŸŃ‡Đ°Ń†Đ” Đ°ĐŽĐŒŃĐœiць ĐČŃ‹Đ»ŃƒŃ‡ŃĐœĐœĐ”?"
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "Вы ĐœĐ” ĐŒĐŸĐ¶Đ°Ń†Đ” Đ°ĐŽĐŒŃĐœiць ĐČŃ‹Đ»ŃƒŃ‡ŃĐœĐœĐ” гэтага паĐșĐ”Ń‚Ńƒ. ĐĐœ ŃƒĐ¶ĐŸ ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœŃ‹"
+msgid "Spanish"
+msgstr "IŃĐżĐ°ĐœŃĐși"
-#: ../../install_steps_gtk.pm:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Start"
+msgstr "СтартаĐČĐ°Đ” ĐŒĐ”ĐœŃŽ"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Гэта абаĐČŃĐ·ĐșĐŸĐČы паĐșДт, ŃĐłĐŸ ĐČŃ‹Đ»ŃƒŃ‡ŃĐœĐœĐ” ĐœĐ”Đ»ŃŒĐłĐ° Đ°ĐŽĐŒŃĐœiць"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Configuring applications..."
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "You can't select/unselect this package"
-msgstr "Вы ĐœĐ” ĐŒĐŸĐ¶Đ°Ń†Đ” ĐČŃ‹Đ»ŃƒŃ‡Đ°Ń†ŃŒ і Đ°ĐŽĐŒŃĐœŃŃ†ŃŒ ĐČŃ‹Đ»ŃƒŃ‡ŃĐœĐœĐ” гэтага паĐșĐ”Ń‚Ńƒ"
+msgid "Normal modem connection"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "File Selection"
+msgstr "Выбар групы паĐșДтаў"
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The following packages are going to be removed"
-msgstr "ĐĐ°ŃŃ‚ŃƒĐżĐœŃ‹Ń паĐșДты Đ±ŃƒĐŽŃƒŃ†ŃŒ ĐČŃ‹ĐŽĐ°Đ»Đ”ĐœŃ‹"
+msgid ""
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+" tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+" standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
-msgid "The following packages are going to be installed"
-msgstr "ĐĐ°ŃŃ‚ŃƒĐżĐœŃ‹Ń паĐșДты Đ±ŃƒĐŽŃƒŃ†ŃŒ ĐŽĐ°ĐŽĐ°ĐœŃ‹ ĐŽĐ° сiŃŃ‚ŃĐŒŃ‹"
+msgid "CUPS"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"You can't select this package as there is not enough space left to install it"
+msgid "Run config tool"
msgstr ""
-"Вы ĐœĐ” ĐŒĐŸĐ¶Đ°Ń†Đ” ĐČŃ‹Đ±Ń€Đ°Ń†ŃŒ гэты паĐșДт, Ń‚Đ°ĐŒŃƒ яĐș ĐœĐ” хапаД ĐŒĐ”ŃŃ†Đ° ĐŽĐ»Ń ŃĐłĐŸ ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Importance: %s\n"
-msgstr "Đ—ĐœĐ°Ń‡ĐœĐ°ŃŃ†ŃŒ: %s\n"
+msgid "Bootloader installation"
+msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” Đ·Đ°ĐłŃ€ŃƒĐ·Ń‡Ń‹Đșу"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Size: %d KB\n"
-msgstr "ĐŸĐ°ĐŒĐ”Ń€: %d Kб\n"
+msgid "Root partition size in MB: "
+msgstr "ĐšĐ°Ń€Đ°ĐœŃ‘ĐČы разЎзДл ў Mб: "
#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Version: %s\n"
-msgstr "ВДрсiя: %s\n"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "Гэта абаĐČŃĐ·ĐșĐŸĐČы паĐșДт, ŃĐłĐŸ ĐČŃ‹Đ»ŃƒŃ‡ŃĐœĐœĐ” ĐœĐ”Đ»ŃŒĐłĐ° Đ°ĐŽĐŒŃĐœiць"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Name: %s\n"
-msgstr "IĐŒŃ: %s\n"
+msgid "Etherboot ISO image is %s"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"named (BIND) - гэта сДрĐČДр ĐŽĐ°ĐŒĐ”ĐœĐœŃ‹Ń… iĐŒŃ‘ĐœĐ°Ńž, яĐși ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаДцца ĐŽĐ»Ń\n"
+"пДраĐșĐ»Đ°ĐŽĐ°ĐœĐœŃ iĐŒŃ‘Đœ ĐČŃƒĐ·Đ»ĐŸŃž у IP аЮрасы."
+
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Bad package"
-msgstr "Đ”Ń€ŃĐœĐœŃ‹ паĐșДт"
+msgid "Disconnect..."
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other"
-msgstr "Đ†ĐœŃˆŃ‹Ń"
+msgid "Saint Lucia"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Report"
+msgstr "ĐŸĐŸŃ€Ń‚"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "ĐĐłŃƒĐ»ŃŒĐœŃ‹ ĐżĐ°ĐŒĐ”Ń€: %d / %d Mб"
+msgid "Palau"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Next ->"
-msgstr "ДалДĐč ->"
+msgid "level"
+msgstr "ŃƒĐ·Ń€ĐŸĐČĐ”ĐœŃŒ"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Individual package selection"
-msgstr "Асабiсты ĐČыбар паĐșДтаў"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
+msgstr ""
#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Package Group Selection"
msgstr "Выбар групы паĐșДтаў"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
+msgid "Restore Via Network Protocol: %s"
msgstr ""
-"ĐŁ ВашаĐč сiŃŃ‚ŃĐŒĐ” ĐŒĐ°Đ”Ń†Ń†Đ° ĐœĐ”ĐŽĐ°Ń…ĐŸĐż рэсурсаў, Ń‚Đ°ĐŒŃƒ ĐŒĐ°ĐłŃ‡Ń‹ĐŒŃ‹ ĐżŃ€Đ°Đ±Đ»Đ”ĐŒŃ‹\n"
-"пры ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœi Mandrake Linux. ĐŁ ĐłŃŃ‚Ń‹ĐŒ ĐČыпаЮĐșу ĐżĐ°ŃĐżŃ€Đ°Đ±ŃƒĐčцД тэĐșстаĐČую\n"
-"ĐżŃ€Đ°ĐłŃ€Đ°ĐŒŃƒ ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ. Đ”Đ»Ń гэтага ĐœĐ°Ń†iŃĐœiцД `F1' у час Đ·Đ°ĐłŃ€ŃƒĐ·Đși, Đ° ĐżĐŸŃ‚Ń‹ĐŒ\n"
-"ĐœĐ°Đ±ŃŃ€Ń‹Ń†Đ” `text' i ĐœĐ°Ń†iŃĐœiцД <ENTER>."
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Save packages selection"
-msgstr "Асабiсты ĐČыбар паĐșДтаў"
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "You can configure each parameter of the module here."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Automated"
-msgstr "ĐŃžŃ‚Đ°ĐŒĐ°Ń‚Ń‹Ń‡ĐœŃ‹"
+msgid "Choose the resolution and the color depth"
+msgstr "Выбар ĐżĐ°ĐŒĐ”Ń€Đ°Ńž эĐșŃ€Đ°ĐœŃƒ i глыбiĐœi ĐșĐŸĐ»Đ”Ń€Ńƒ"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Replay"
-msgstr "ĐŸĐ”Ń€Đ°Đ·Đ°ĐłŃ€ŃƒĐ·iць"
+#: ../../standalone/mousedrake:1
+#, c-format
+msgid "Emulate third button?"
+msgstr "Đ­ĐŒŃƒĐ»ŃĐČаць трэцюю ĐșĐœĐŸĐżĐșу?"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Mount"
+msgstr "ĐœĐ°ĐœŃ†iраĐČĐ°ĐœĐœĐ”"
+
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Generate auto install floppy"
+msgid "Creating auto install floppy"
msgstr "СтĐČĐ°Ń€ŃĐœĐœĐ” ЮысĐșДты ĐŽĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
-#: ../../install_steps_interactive.pm:1
+#: ../../steps.pm:1
#, fuzzy, c-format
-msgid "Reboot"
-msgstr "Root"
+msgid "Install updates"
+msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” сiŃŃ‚ŃĐŒŃ‹"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
+msgid "text box height"
msgstr ""
-"ĐĐ”ĐșĐ°Ń‚ĐŸŃ€Ń‹Ń ĐșŃ€ĐŸĐși ĐœĐ” Đ·Đ°ĐČĐ”Ń€ŃˆĐ°ĐœŃ‹.\n"
-"Вы сапраўЮы жаЎаДцД ĐČыĐčсцi зараз?"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "State"
+msgstr "СтартаĐČĐ°Đ” ĐŒĐ”ĐœŃŽ"
+
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Creating auto install floppy..."
-msgstr "СтĐČĐ°Ń€ŃĐœĐœĐ” ЮысĐșДты ĐŽĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
+msgid "Be sure a media is present for the device %s"
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../any.pm:1
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "УстаўцД ЮысĐșĐ”Ń‚Ńƒ ў ЮысĐșĐ°ĐČĐŸĐŽ %s"
+msgid "Enable multiple profiles"
+msgstr "Đ”Đ°ŃŃ‚ŃƒĐżĐœĐ° ŃˆĐŒĐ°Ń‚ ĐżŃ€ĐŸŃ„iĐ»ŃŃž"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
+"These options can backup and restore all files in your /etc directory.\n"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Працэс ŃƒŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ Đ·Đ°ĐłŃ€ŃƒĐ·Ń‡Ń‹ĐșĐ° ĐœĐ” Đ°Ń‚Ń€Ń‹ĐŒĐ°ŃžŃŃ. ĐŁĐ·ĐœiĐșла ĐœĐ°ŃŃ‚ŃƒĐżĐœĐ°Ń ĐżĐ°ĐŒŃ‹Đ»ĐșĐ°:"
+msgid "Local printer"
+msgstr "ЛаĐșĐ°Đ»ŃŒĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Files Restored..."
+msgstr ""
#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Installing bootloader"
-msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” Đ·Đ°ĐłŃ€ŃƒĐ·Ń‡Ń‹Đșу"
+msgid "Package selection"
+msgstr "Выбар групы паĐșДтаў"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Mauritania"
+msgstr ""
+
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
+"\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
+"\n"
msgstr ""
-"ĐŸĐ°ĐŒŃ‹Đ»ĐșĐ° ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ Đ°boot, \n"
-"спрабаĐČаць ŃƒŃŃ‚Đ°Đ»Ń‘ŃžĐČаць, ĐœĐ”ĐłĐ»Đ”ĐŽĐ·ŃŃ‡Ń‹ ĐœĐ° ĐŒĐ°ĐłŃ‡Ń‹ĐŒĐ°ŃŃ†ŃŒ ĐżĐ°Ń€ŃƒŃˆŃĐœĐœŃ ĐżĐ”Ń€ŃˆĐ°ĐłĐ° Ń€Đ°Đ·ĐŽĐ”Đ»Ńƒ?"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do you want to use aboot?"
-msgstr "Вы жаЎаДцД ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць aboot?"
+msgid ""
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "All primary partitions are used"
+msgstr "УсД ĐżĐ”Ń€ŃˆĐ°ŃĐœŃ‹Ń разЎзДлы ĐČыĐșĐ°Ń€Ń‹ŃŃ‚Đ°ĐœŃ‹"
+
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Preparing bootloader..."
-msgstr "ĐŸĐ°ĐŽŃ€Ń‹Ń…Ń‚ĐŸŃžĐșĐ° Đ·Đ°ĐłŃ€ŃƒĐ·Ń‡Ń‹ĐșĐ°"
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "Domain Admin Password"
-msgstr "ПаЮцĐČДрЎзiць ĐżĐ°Ń€ĐŸĐ»ŃŒ"
+msgid "Installation Server Configuration"
+msgstr "ЗаĐșĐ°ĐœŃ‡ŃĐœĐœĐ” ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐși"
#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Domain Admin User Name"
-msgstr "IĐŒŃ ĐŽĐ°ĐŒĐ”ĐœŃƒ"
+#, c-format
+msgid "Configuring IDE"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° IDE"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Windows Domain"
-msgstr "НаĐČуĐșĐŸĐČыя прыĐșĐ»Đ°ĐŽĐ°ĐœĐœŃ–"
+msgid "Network functionality not configured"
+msgstr "ĐœĐ°ĐœiŃ‚ĐŸŃ€ паĐșŃƒĐ»ŃŒ ĐœĐ” ĐœĐ°ŃŃ‚Ń€ĐŸĐ”ĐœŃ‹"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Authentication Windows Domain"
-msgstr "ĐŃžŃ‚ŃĐœŃ‚Ń‹Ń„iĐșацыя"
+msgid "Configure module"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ĐŒŃ‹ŃˆŃ‹"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+msgid "Cocos (Keeling) Islands"
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Server"
-msgstr "NIS сДрĐČДр:"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnecting from the Internet "
+msgstr "Đ”Đ°Đ»ŃƒŃ‡ŃĐœĐœĐ” ĐŽĐ° IĐœŃ‚ŃŃ€ĐœŃŃ‚Ńƒ"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "NIS Domain"
-msgstr "NIS Domain"
+msgid "You'll need to reboot before the modification can take place"
+msgstr "Каб Đ·ĐŒŃĐœĐ”ĐœĐœi ўступiĐ»i ў ĐŽĐ·Đ”ŃĐœĐœĐ”, ĐœĐ”ĐŸĐ±Ń…ĐŸĐŽĐœĐ° ĐżĐ”Ń€Đ°Đ·Đ°ĐłŃ€ŃƒĐ·iцца"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Authentication NIS"
-msgstr "ĐŃžŃ‚ŃĐœŃ‚Ń‹Ń„iĐșацыя NIS"
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Provider phone number"
+msgstr "ĐŃƒĐŒĐ°Ń€ Ń‚ŃĐ»Đ”Ń„ĐŸĐœŃƒ праĐČĐ°ĐčЮара"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "NIS"
-msgstr "ВыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць NIS"
+msgid "Host %s"
+msgstr "IĐŒŃ ĐŒĐ°ŃˆŃ‹ĐœŃ‹"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "LDAP Server"
-msgstr "сДрĐČДр"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "LDAP Base dn"
-msgstr ""
+msgid "Armenia"
+msgstr "ĐŃ€ĐŒŃĐœŃĐși (стары)"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Authentication LDAP"
-msgstr "ĐŃžŃ‚ŃĐœŃ‚Ń‹Ń„iĐșацыя"
+msgid "Fiji"
+msgstr "Đ€iĐœŃĐși"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "LDAP"
+msgid ""
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Local files"
-msgstr "ЛаĐșĐ°Đ»ŃŒĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
-
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Authentication"
-msgstr "ĐŃžŃ‚ŃĐœŃ‚Ń‹Ń„iĐșацыя"
+msgid "Second floppy drive"
+msgstr "Другi ЮысĐșĐ°ĐČĐŸĐŽ"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
+msgid "About Harddrake"
msgstr ""
-"Гэты ĐżĐ°Ń€ĐŸĐ»ŃŒ Đ·Đ°ĐœĐ°ĐŽŃ‚Đ° ĐżŃ€ĐŸŃŃ‚Ń‹ (ŃĐłĐŸ ĐŽĐ°ŃžĐ¶Ń‹ĐœŃ паĐČiĐœĐœĐ° Đ±Ń‹Ń†ŃŒ ĐœĐ” ĐŒĐ”ĐœĐ”Đč Đ·Đ° %d Đ»iтараў)"
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "No password"
-msgstr "ĐŃĐŒĐ° ĐżĐ°Ń€ĐŸĐ»ŃŽ"
+msgid "Drive capacity"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Set root password"
-msgstr "ĐŸĐ°Ń€ĐŸĐ»ŃŒ ĐŽĐ»Ń root"
+msgid ""
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
+msgstr ""
+"УстаўцД ЮысĐșĐ”Ń‚Ńƒ ў ЮысĐșĐ°ĐČĐŸĐŽ\n"
+"УсД ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń ĐœĐ° гэтаĐč ЮысĐșДцД Đ±ŃƒĐŽŃƒŃ†ŃŒ ŃŃ‚Ń€Đ°Ń‡Đ°ĐœŃ‹"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr ""
+msgid "Size: %s"
+msgstr "ĐŸĐ°ĐŒĐ”Ń€: %s"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Services: %d activated for %d registered"
+msgid "Control and Shift keys simultaneously"
msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Services"
-msgstr "прылаЎа"
+msgid "secondary"
+msgstr "%d сДĐșŃƒĐœĐŽĐ°Ńž"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "System"
-msgstr "Mouse Systems"
+msgid "View Backup Configuration."
+msgstr "ĐšĐ°ĐœŃ„iгурацыя сДтĐși"
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "%s on %s"
-msgstr "ĐŸĐŸŃ€Ń‚"
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, report check result to syslog."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Bootloader"
-msgstr "Đ“Đ°Đ»ĐŸŃžĐœŃ‹Ń ĐŸĐżŃ†Ń‹i пачатĐșĐŸĐČага Đ·Đ°ĐłŃ€ŃƒĐ·Ń‡Ń‹Đșу"
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No password"
+msgstr "ĐŃĐŒĐ° ĐżĐ°Ń€ĐŸĐ»ŃŽ"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Boot"
-msgstr "Root"
+msgid "Nigeria"
+msgstr "ĐżĐ°ŃĐ»ŃĐŽĐŸŃžĐœĐ°Ń"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "disabled"
-msgstr "йаблiца"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "There is no existing partition to use"
+msgstr "ĐŃĐŒĐ° iŃĐœŃƒŃŽŃ‡Ń‹Ń… разЎзДлаў, яĐșiя ĐŒĐŸĐ¶ĐœĐ° ĐČыĐșарыстаць"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "activated"
-msgstr "АĐșŃ‚Ń‹ŃžĐœŃ‹"
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
+msgstr "ĐŁ ĐČашаĐč ŃŃ–ŃŃ‚ŃĐŒĐ” ĐœŃĐŒĐ° ĐœiĐČĐŸĐŽĐœĐ°ĐłĐ° сДтĐșĐ°ĐČага аЮаптара!"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Firewall"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
msgstr ""
+"Каб ЮруĐșĐ°ĐČаць праз ŃĐŸĐșДт ЮруĐșарĐși, ĐČĐ°ĐŒ ĐœĐ”Đ°Đ±Ń…ĐŸĐŽĐœĐ° Đ·Đ°Đ±ŃŃĐżĐ”Ń‡Ń‹Ń†ŃŒ\n"
+"iĐŒŃ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ i ĐŒĐ°ĐłŃ‡Ń‹ĐŒĐ° ŃĐłĐŸ ĐœŃƒĐŒĐ°Ń€ ĐżĐŸŃ€Ń‚Ńƒ."
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Security"
-msgstr "ĐșучараĐČы"
+msgid "Hard drive information"
+msgstr "IĐœŃ„Đ°Ń€ĐŒĐ°Ń†Ń‹Ń"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Security Level"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐși ŃžĐ·Ń€ĐŸŃžĐœŃ Đ±ŃŃĐżĐ”Đși"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Russian"
+msgstr "РусĐși"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Network"
-msgstr "ХДтĐșĐ°:"
+msgid "Jordan"
+msgstr "IŃ€Đ°ĐœŃĐși"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Network & Internet"
-msgstr "ХДтĐșĐ°ĐČы iĐœŃ‚ŃŃ€Ń„Đ”Đčс"
+msgid "Hide files"
+msgstr "mkraid ĐœĐ” ĐżŃ€Đ°Ń†Đ°Đ·ĐŽĐŸĐ»ŃŒĐœŃ‹"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Graphical interface"
-msgstr "ЗапусĐș X пры старцД сiŃŃ‚ŃĐŒŃ‹"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Hardware"
-msgstr ""
+msgid "Auto-detect printers connected to this machine"
+msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "TV card"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
+msgid "Sorry, no floppy drive available"
+msgstr "ВыбачаĐčцД, алД ЮысĐșĐ°ĐČĐŸĐŽ ĐœĐ”ĐŽĐ°ŃŃ‚ŃƒĐżĐœŃ‹"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgid "Bolivia"
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "ĐŠi ёсць у ĐČас iĐœŃˆŃ‹?"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Sound card"
-msgstr "ĐĄŃ‚Đ°ĐœĐŽĐ°Ń€Ń‚ĐœŃ‹"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Remote CUPS server"
-msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ сДрĐČДр CUPS"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "No printer"
-msgstr "IĐŒŃ ЮруĐșарĐși"
-
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer"
-msgstr "ĐŸŃ€Ń‹ĐœŃ‚ŃŃ€"
-
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Mouse"
-msgstr "ĐŸĐŸŃ€Ń‚ ĐŒŃ‹ŃˆŃ‹"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Timezone"
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Keyboard"
-msgstr "КлаĐČiятура"
+msgid "Bad package"
+msgstr "Đ”Ń€ŃĐœĐœŃ‹ паĐșДт"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Summary"
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "NTP Server"
-msgstr "NIS сДрĐČДр:"
+msgid "DrakSec Basic Options"
+msgstr "Опцыi"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Automatic time synchronization (using NTP)"
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program. Just type \"sndconfig\" in a console."
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Ваш сiŃŃ‚ŃĐŒĐœŃ‹ гаЎзiĐœĐœiĐș ŃƒŃŃ‚Đ°Đ»ŃĐČĐ°ĐœŃ‹ ĐœĐ° GMT?"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Which is your timezone?"
-msgstr "ĐŻĐși ĐČаш часаĐČы ĐżĐŸŃŃ?"
+msgid "Romania"
+msgstr "NIS Domain"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Would you like to try again?"
-msgstr "ЖаЎаДцД ĐœĐ°ŃŃ‚Ń€ĐŸiць ĐżŃ€Ń‹ĐœŃ‚ŃŃ€?"
+msgid "choose device"
+msgstr "Đ—Đ°ĐłŃ€ŃƒĐ·Đ°Ń‡ĐœĐ°Ń прылаЎа"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Зрабiць ĐœĐ”Đ°ĐșŃ‚Ń‹ŃžĐœŃ‹ĐŒ сДтĐșĐ°ĐČĐ°Đ” Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ”"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "ХуĐČŃĐ·ŃŒ Đ· Đ»ŃŽŃ€Đ°ĐŒ ĐŽĐ»Ń Đ°Ń‚Ń€Ń‹ĐŒĐ°ĐœĐœŃ спiсу ĐŽĐ°ŃŃ‚ŃƒĐżĐœŃ‹Ń… паĐșДтаў"
+msgid "Canada"
+msgstr "ĐšĐ°ĐœĐ°ĐŽŃĐși (КĐČĐ”Đ±ŃĐș)"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Выбар люстра ĐŽĐ»Ń Đ°Ń‚Ń€Ń‹ĐŒĐ°ĐœĐœŃ паĐșДтаў"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr "ХуĐČŃĐ·ŃŒ Đ· Đ»ŃŽŃ€Đ°ĐŒ ĐŽĐ»Ń Đ°Ń‚Ń€Ń‹ĐŒĐ°ĐœĐœŃ спiсу ĐŽĐ°ŃŃ‚ŃƒĐżĐœŃ‹Ń… паĐșДтаў"
+msgid "Remove from LVM"
+msgstr "Đ’Ń‹ĐŽĐ°Đ»iць Đ· LVM"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates ?"
+msgid "Timezone"
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "УстаўцД ЮысĐșĐ”Ń‚Ńƒ ў ЮысĐșĐ°ĐČĐŸĐŽ %s"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "German"
+msgstr "ĐŃĐŒĐ”Ń†Đși"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "УстаўцД ЮысĐșĐ”Ń‚Ńƒ ў ЮысĐșĐ°ĐČĐŸĐŽ %s"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Next ->"
+msgstr "ДалДĐč ->"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Post-install configuration"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ĐżĐ°ŃĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
+msgid ""
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Installing package %s\n"
-"%d%%"
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
msgstr ""
-"ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” паĐșĐ”Ń‚Ńƒ %s\n"
-"%d%%"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Preparing installation"
-msgstr "ĐŸĐ°ĐŽŃ€Ń‹Ń…Ń‚ĐŸŃžĐșĐ° ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœŃŒĐœŃ"
+msgid "Guinea-Bissau"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom ĐżĐ°Đ·ĐœĐ°Ń‡Đ°ĐœŃ‹ \"%s\""
+msgid "Horizontal refresh rate"
+msgstr "Đ§Đ°ŃŃ†Ń–ĐœŃ ĐłĐ°Ń€Ń‹Đ·Đ°ĐœŃ‚Đ°Đ»ŃŒĐœŃ‹Đč Ń€Đ°Đ·ĐłĐŸŃ€Ń‚Đși"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
msgstr ""
-"Калi ĐČы ĐŒĐ°Đ”Ń†Đ” ўсД CD ЮысĐși са спiса ĐœiĐ¶ŃĐč, ĐœĐ°Ń†iŃĐœiцД ОĐș.\n"
-"Калi ĐČы ĐœĐ” ĐŒĐ°Đ”Ń†Đ” Đ°Đœi ĐČĐŸĐŽĐœĐ°ĐłĐ° Đ· гэтых CD ЮысĐșаў, ĐœĐ°Ń†iŃĐœiцД ĐĐŽĐŒŃĐœiць.\n"
-"Калi ĐœĐ”ĐșĐ°Ń‚ĐŸŃ€Ń‹Ń… Đ· CD ЮысĐșаў ĐœĐ” ĐŒĐ°Đ”Ń†Đ”, Đ°ĐŽĐŒŃĐœiцД iх ĐČŃ‹ĐŽĐ·ŃĐ»Đ”ĐœĐœĐ” i ĐœĐ°Ń†iŃĐœiцД ОĐș."
-
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
-#, c-format
-msgid "All"
-msgstr "Усё"
+"ĐĐ”Đ»ŃŒĐłĐ° ŃžŃŃ‚Đ°Đ»ŃĐČаць ĐżŃƒĐœĐșт ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ, Ń‚Đ°ĐŒŃƒ ŃˆŃ‚ĐŸ разЎДл ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаДцца ĐŽĐ»Ń\n"
+"ĐČiŃ€Ń‚ŃƒĐ°Đ»ŃŒĐœĐ°Đč фаĐčлаĐČĐ°Đč сiŃŃ‚ŃĐŒŃ‹.\n"
+"СпачатĐșу ĐČŃ‹ĐŽĐ°Đ»iцД ĐČiŃ€Ń‚ŃƒĐ°Đ»ŃŒĐœŃƒŃŽ сiŃŃ‚ŃĐŒŃƒ"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Truly minimal install (especially no urpmi)"
+msgid ""
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "With basic documentation (recommended!)"
+msgid "USB controllers"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, fuzzy, c-format
-msgid "With X"
-msgstr "ЧаĐșĐ°ĐčцД"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
+msgid "What norm is your TV using?"
+msgstr "ĐŻĐși тып ĐČашага ISDN Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ?"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Type of install"
-msgstr "Выбар паĐșДтаў ĐŽĐ»Ń ŃƒŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
+msgid "Type:"
+msgstr "бып: "
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Selected size is larger than available space"
-msgstr ""
+msgid "Share name"
+msgstr "IĐŒŃ ĐŽĐ»Ń Ń€Đ°Đ·ĐŒĐ”Ń€ĐșĐ°ĐČĐ°ĐœĐ°ĐłĐ° рэсурсу"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "УстаўцД ЮысĐșĐ”Ń‚Ńƒ ў ЮысĐșĐ°ĐČĐŸĐŽ %s"
+msgid "enable"
+msgstr "йаблiца"
#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Loading from floppy"
-msgstr "ĐĐŽĐœĐ°ŃžĐ»Đ”ĐœĐœĐ” Đ· ЮысĐșДты"
+msgid ""
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
+msgstr "ХуĐČŃĐ·ŃŒ Đ· Đ»ŃŽŃ€Đ°ĐŒ ĐŽĐ»Ń Đ°Ń‚Ń€Ń‹ĐŒĐ°ĐœĐœŃ спiсу ĐŽĐ°ŃŃ‚ŃƒĐżĐœŃ‹Ń… паĐșДтаў"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "Package selection"
-msgstr "Выбар групы паĐșДтаў"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Save on floppy"
-msgstr "ЗахаĐČĐ°ĐœĐœĐ” ĐœĐ° ЮысĐșĐ”Ń‚Ńƒ"
+msgid ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
+msgstr "ĐŠi жаЎаДцД пратэсцiраĐČаць ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐși?"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Load from floppy"
-msgstr "ĐĐŽĐœĐ°ŃžĐ»Đ”ĐœĐœĐ” Đ· ЮысĐșДты"
+msgid "Remove the loopback file?"
+msgstr "Đ€Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœĐ” ĐČiŃ€Ń‚ŃƒĐ°Đ»ŃŒĐœĐ°ĐłĐ° Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ %s"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
+msgid "Selected size is larger than available space"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+msgid "NCP server name missing!"
msgstr ""
-"Ваша сiŃŃ‚ŃĐŒĐ° ĐœĐ” ĐŒĐ°Đ” ЮастаĐșĐŸĐČĐ° ĐŒĐ”ŃŃ†Đ° ĐŽĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ цi Đ°Đ±ĐœĐ°ŃžĐ»Đ”ĐœĐœŃ (%d > %d)"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Looking for available packages..."
-msgstr "ĐŸŃ€Đ°ĐłĐ»ŃĐŽ ĐŽĐ°ŃŃ‚ŃƒĐżĐœŃ‹Ń… паĐșДтаў"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "ĐŸĐŸŃˆŃƒĐș паĐșДтаў ĐŽĐ»Ń Đ°Đ±ĐœĐ°ŃžĐ»Đ”ĐœĐœŃ"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Please choose your country."
+msgstr "ĐșĐ°Đ»i ласĐșĐ°, ĐżĐ°Đ·ĐœĐ°Ń‡Ń†Đ” тып ĐČашаĐč ĐŒŃ‹ŃˆŃ‹."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Looking at packages already installed..."
-msgstr "Вы ĐœĐ” ĐŒĐŸĐ¶Đ°Ń†Đ” Đ°ĐŽĐŒŃĐœiць ĐČŃ‹Đ»ŃƒŃ‡ŃĐœĐœĐ” гэтага паĐșĐ”Ń‚Ńƒ. ĐĐœ ŃƒĐ¶ĐŸ ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœŃ‹"
+msgid "Hard Disk Backup files..."
+msgstr "Đ”Ń€ŃĐœĐœŃ‹ фаĐčĐ» Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČĐ°Đč ĐșĐŸĐżii"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "ĐŸŃ€Đ°ĐłĐ»ŃĐŽ ĐŽĐ°ŃŃ‚ŃƒĐżĐœŃ‹Ń… паĐșДтаў"
+msgid "Laotian"
+msgstr "Đ Đ°Đ·ĐŒĐ”Ń€ĐșĐ°ĐČĐ°ĐœĐœĐ”"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
+msgid "Samoa"
msgstr ""
-"ĐĐ” хапаД ĐŒĐ”ŃŃ†Đ° ў Đ±ŃƒŃ„Đ”Ń€Ń‹ паЎĐșачĐși (swap) ĐŽĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ, паĐČŃĐ»iчцД ŃĐłĐŸ."
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
msgstr ""
+"ПратаĐșĐŸĐ» rstat ĐŽĐ°Đ·ĐČĐ°Đ»ŃĐ” ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°ĐŒ сДтĐși Đ°Ń‚Ń€Ń‹ĐŒĐ»iĐČаць\n"
+"ĐżĐ°ĐŒĐ”Ń€Ń‹ ĐœĐ°ĐłŃ€ŃƒĐ·Đși ĐŽĐ»Ń ĐșĐŸĐ¶ĐœĐ°Đč ĐŒĐ°ŃˆŃ‹ĐœŃ‹ сДтĐși."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Check bad blocks?"
-msgstr "ПраĐČĐ”Ń€Ń‹Ń†ŃŒ ĐœĐ° ĐœĐ°ŃŃžĐœĐ°ŃŃ†ŃŒ ĐŽŃ€ŃĐœĐœŃ‹Ń… Đ±Đ»ĐŸĐșаў?"
+msgid "Re-generating list of configured scanners ..."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Выбар разЎзДлаў ĐŽĐ»Ń Ń„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœŃ"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Scanner"
+msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” ĐČiЮэаĐșарту"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Каб ĐŒĐ°ĐŽŃ‹Ń„iĐșацыя таблiцы разЎзДлаў Đ·ĐŽĐ”ĐčŃĐœiĐ»Đ°ŃŃ, ĐżĐ°Ń‚Ń€ŃĐ±ĐœĐ° ĐżĐ”Ń€Đ°Đ·Đ°ĐłŃ€ŃƒĐ·ĐșĐ°."
+#: ../../Xconfig/test.pm:1
+#, fuzzy, c-format
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr "ĐŸĐ°ĐżŃŃ€ŃĐŽĐ¶Đ°ĐœĐœĐ”: тэсцiраĐČĐ°ĐœĐœĐ” ĐœĐ° гэтаĐč ĐČiЮэаĐșарцД ĐœĐ”Đ±ŃŃĐżĐ”Ń‡ĐœĐ°"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr ""
+"IĐŒŃ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșу паĐČiĐœĐœĐ° Đ·ĐŒŃŃˆŃ‡Đ°Ń†ŃŒ Đ»iтары Ń‚ĐŸĐ»ŃŒĐși ĐœĐ° ĐœiĐ¶ĐœiĐŒ рэгiстры, \n"
+"Đ»iчбы, `-' i `_'"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Choose the mount points"
-msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” ĐżŃƒĐœĐșты ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr ""
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Menudrake"
+msgstr "абаĐČŃĐ·ĐșĐŸĐČĐ°"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "No partition available"
-msgstr "ĐœŃĐŒĐ° ĐŽĐ°ŃŃ‚ŃƒĐżĐœŃ‹Ń… разЎзДлаў"
+msgid "Welcome To Crackers"
+msgstr "ĐĄĐ°Ń€ĐŽŃŃ‡ĐœĐ° Đ·Đ°ĐżŃ€Đ°ŃˆĐ°Đ”ĐŒ у Crackers"
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Configuring IDE"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° IDE"
+msgid "Module options:"
+msgstr "Опцыi ĐŒĐŸĐŽŃƒĐ»ŃŽ:"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "IDE"
-msgstr "IDE"
+msgid "Secure your networks with the Multi Network Firewall"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° Đșарт PCMCIA ..."
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Go on without configuring the network"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° сДтĐși"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid "Abort"
+msgstr "ĐĐŽĐŒŃĐœiць"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Button 3 Emulation"
+msgid "No password prompt on %s at port %s"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "Выбар паĐșДтаў ĐŽĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Usage of remote scanners"
+msgstr "ВыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць ĐœĐ”Đ·Đ°ĐœŃŃ‚ŃƒŃŽ ĐżŃ€Đ°ŃŃ‚ĐŸŃ€Ńƒ"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Button 2 Emulation"
+msgid "\t-CDROM.\n"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Buttons emulation"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
msgstr ""
+"Ваш разЎзДл Đ· Windows Đ·Đ°ĐœĐ°ĐŽŃ‚Đ° Ń„Ń€Đ°ĐłĐŒĐ”ĐœŃ‚Đ°ĐČĐ°ĐœŃ‹. \n"
+"РэĐșĐ°ĐŒĐ”ĐœĐŽŃƒĐ”ĐŒ спачатĐșу Đ·Đ°ĐżŃƒŃŃ†iць ĐżŃ€Đ°ĐłŃ€Đ°ĐŒŃƒ ``defrag''"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Калi ласĐșĐ°, ĐżĐ°Đ·ĐœĐ°Ń‡Ń†Đ” ĐżĐŸŃĐ»ŃĐŽĐŸŃžĐœŃ‹ ĐżĐŸŃ€Ń‚, ĐŽĐ° яĐșĐŸĐłĐ° паЎĐșĐ»ŃŽŃ‡Đ°ĐœĐ° ĐČашая ĐŒŃ‹Ńˆ."
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak (НарĐČДжсĐși)"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mouse Port"
-msgstr "ĐŸĐŸŃ€Ń‚ ĐŒŃ‹ŃˆŃ‹"
+msgid "Hard Disk Backup Progress..."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
-msgid "Please choose your type of mouse."
-msgstr "ĐșĐ°Đ»i ласĐșĐ°, ĐżĐ°Đ·ĐœĐ°Ń‡Ń†Đ” тып ĐČашаĐč ĐŒŃ‹ŃˆŃ‹."
+msgid "Unable to fork: %s"
+msgstr "Зрабiць ĐœĐ”Đ°ĐșŃ‚Ń‹ŃžĐœŃ‹ĐŒ сДтĐșĐ°ĐČĐ°Đ” Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ”"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Encryption key for %s"
-msgstr "ĐŸĐ°Ń€ĐŸĐ»i ĐœĐ” супаЮаюць"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Type: "
+msgstr "бып: "
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Upgrade %s"
-msgstr "РазЎзДл %s"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "<-- Edit Client"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” цi Đ°Đ±ĐœĐ°ŃžĐ»Đ”ĐœĐœĐ”"
+msgid "no fonts found"
+msgstr "ĐĐ” Đ·ĐœĐ°Đčшлi %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "Install/Upgrade"
-msgstr "УсталёўĐșĐ°"
+msgid "Mouse"
+msgstr "ĐŸĐŸŃ€Ń‚ ĐŒŃ‹ŃˆŃ‹"
-#: ../../install_steps_interactive.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Here is the full list of keyboards available"
-msgstr ""
+msgid "not enough room in /boot"
+msgstr "ĐĐ” хапаД ЮысĐșĐ°ĐČĐ°Đč ĐżŃ€Đ°ŃŃ‚ĐŸŃ€Ń‹ ў /boot"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Калi ласĐșĐ°, Đ°Đ±ŃŃ€Ń‹Ń†Đ” тып ĐșлаĐČiятуры."
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Choosing an arbitratry driver"
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Quit"
-msgstr "ВыхаЮ"
+msgid "Host name"
+msgstr "IĐŒŃ ĐŒĐ°ŃˆŃ‹ĐœŃ‹"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "License agreement"
-msgstr "Đ›Ń–Ń†ŃĐœĐ·Ń–ĐčĐœĐ°Ń ĐŽĐ°ĐŒĐŸĐČĐ°"
+msgid "Liechtenstein"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "An error occurred"
-msgstr "ĐĐŽĐ±Ń‹Đ»Đ°ŃŃ ĐżĐ°ĐŒŃ‹Đ»ĐșĐ°"
+msgid "the color of the progress bar"
+msgstr ""
-#: ../../install_steps_newt.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+msgid "Suppress Fonts Files"
msgstr ""
-" <Tab>/<Alt-Tab> ĐżĐ°ĐŒiж ŃĐ»Đ”ĐŒĐ”ĐœŃ‚Đ°ĐŒi | <Space> ĐČыбар | <F12> ĐœĐ°ŃŃ‚ŃƒĐżĐœŃ‹ эĐșŃ€Đ°Đœ "
-#: ../../install_steps_newt.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” Mandrake Linux %s"
+msgid "Add to RAID"
+msgstr "ДаЮаць Юа RAID"
-#: ../../install_steps.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "No floppy drive available"
-msgstr "ДысĐșĐ°ĐČĐŸĐŽ ĐœĐ”ĐŽĐ°ŃŃ‚ŃƒĐżĐœŃ‹"
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Welcome to %s"
-msgstr "Đ ĐŽĐ Â°ĐĄĐ‚Đ Ò‘ĐĄĐŒĐĄâ€ĄĐ Đ…Đ Â° Đ Â·Đ Â°Đ Ń—ĐĄĐ‚Đ Â°ĐĄâ‚ŹĐ Â°Đ Â”Đ Ń˜ Сѓ %s"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr ""
-#: ../../install_steps.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "No floppy drive available!"
+msgstr "ДысĐșĐ°ĐČĐŸĐŽ ĐœĐ”ĐŽĐ°ŃŃ‚ŃƒĐżĐœŃ‹"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
msgstr ""
-"ĐĐ”ĐșĐ°Ń‚ĐŸŃ€Ń‹Ń ĐČĐ°Đ¶ĐœŃ‹Ń паĐșДты ĐœĐ” былi ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœŃ‹ ĐșарэĐșŃ‚ĐœĐ°.\n"
-"Другi ĐČаш cdrom ЮысĐș цi ĐČаш cdrom ĐŒĐ°ŃŽŃ†ŃŒ ĐŽŃŃ„Đ”Đșты.\n"
-"ПраĐČДрцД cdrom ĐœĐ° ĐČĐ°ŃˆŃ‹ĐŒ ĐșĐ°ĐŒĐżŃƒŃ‚Đ°Ń€Ń‹, ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаючы\"rpm -qpl Mandrake/RPMS/*."
-"rpm\"\n"
-#: ../../install_steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Đ”ŃƒĐ±Đ»ŃĐČĐ°ĐœĐœĐ” ĐżŃƒĐœĐșту ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ %s"
+msgid "Continue anyway?"
+msgstr "СапраўЮы працягĐČаць?"
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
msgstr ""
-"ĐŁĐ·ĐœiĐșла ĐżĐ°ĐŒŃ‹Đ»ĐșĐ°, яĐșую ĐœĐ” Đ°Ń‚Ń€Ń‹ĐŒĐ»Ń–ĐČаДцца ĐșарэĐșŃ‚ĐœĐ° апрацаĐČаць,\n"
-"Ń‚Đ°ĐŒŃƒ працягĐČĐ°ĐčцД ĐœĐ° сĐČаю рызыĐșу."
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please wait"
-msgstr "Калi ласĐșĐ°, пачаĐșĐ°ĐčцД"
+msgid "Printer"
+msgstr "ĐŸŃ€Ń‹ĐœŃ‚ŃŃ€"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ok"
-msgstr "ОĐș"
+msgid "Saudi Arabia"
+msgstr ""
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
+#: ../../services.pm:1
#, fuzzy, c-format
-msgid "Finish"
-msgstr "Đ€iĐœŃĐși"
+msgid "Internet"
+msgstr "цiĐșĐ°ĐČĐ°"
-#: ../../interactive.pm:1 ../../standalone/draksec:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Basic"
-msgstr "ĐŸŃ€ĐŸŃŃ‚Ń‹Đ”"
+msgid "Some devices were added:\n"
+msgstr ""
-#: ../../interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Advanced"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "Đ“Đ”Đ°ĐŒĐ”Ń‚Ń€Ń‹Ń: %s цылiĐœĐŽŃ€Đ°Ńž, %s ĐłĐ°Đ»ĐŸĐČĐ°Đș, %s сДĐșтараў\n"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing on the printer \"%s\""
+msgstr "ĐĐŽĐ»ŃƒŃ‡ŃĐœĐœĐ” Đ°ĐŽ сДтĐși"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
msgstr ""
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Remove"
-msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
+msgid "Restore From Tape"
+msgstr "ДаЮатĐșĐŸĐČая таблiца разЎзДлаў"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "Modify"
-msgstr "Đ—ĐŒŃĐœiць RAID"
+msgid "Choose the profile to configure"
+msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” Đ°ŃĐœĐŸŃžĐœĐ°ĐłĐ° ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°:"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Add"
-msgstr "ДаЮаць"
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
+msgstr ""
-#: ../../interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Choose a file"
-msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” ĐŽĐ·Đ”ŃĐœĐœĐ”"
+msgid "Backup Now from configuration file"
+msgstr "ĐšĐ°ĐœŃ„iгурацыя сДтĐși"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
+msgid "Mount points should contain only alphanumerical characters"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Restarting printing system..."
+msgstr "ĐŻĐșую сiŃŃ‚ŃĐŒŃƒ ЮруĐșу Вы жаЎаДцД ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць?"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "Right \"Windows\" key"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Left \"Windows\" key"
-msgstr ""
+msgid "See hardware info"
+msgstr "Đ“Đ». Đ°ĐżiŃĐ°ĐœĐœĐ” Đ°Đ±ŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "\"Menu\" key"
-msgstr ""
+msgid "First sector of boot partition"
+msgstr "ĐŸĐ”Ń€ŃˆŃ‹ сДĐșтар Đ·Đ°ĐłŃ€ŃƒĐ·Đ°Ń‡ĐœĐ°ĐłĐ° Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Alt and Shift keys simultaneously"
+msgid "Printer manufacturer, model"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Ctrl and Alt keys simultaneously"
+msgid "PDQ - Print, Don't Queue"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "CapsLock key"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Control and Shift keys simultaneously"
+msgid "Subnet Mask:"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Both Shift keys simultaneously"
+msgid "LiLo and Bootsplash themes installation successfull"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Right Alt key"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
msgstr ""
+"ДĐČĐ° ĐșŃ€Ń‹Ń‚Ń‹Ń‡ĐœŃ‹Ń… ĐżĐ°Ń€Đ°ĐŒĐ”Ń‚Ń€Ń‹ - гэта Ń‡Đ°ŃŃ†Ń–ĐœŃ ĐČДртыĐșĐ°Đ»ŃŒĐœĐ°Đč Ń€Đ°Đ·ĐłĐŸŃ€Ń‚Đși, цi\n"
+"Ń‡Đ°ŃŃ†Ń–ĐœŃ Đ°ĐŽĐœĐ°ŃžĐ»Đ”ĐœĐœŃ ŃžŃŃĐłĐŸ эĐșŃ€Đ°ĐœŃƒ, Đ° таĐșŃĐ°ĐŒĐ° Đ±ĐŸĐ»Đ”Đč ĐČĐ°Đ¶ĐœŃ‹ ĐżĐ°Ń€Đ°ĐŒĐ”Ń‚Ń€ -\n"
+"Ń‡Đ°ŃŃ†Ń–ĐœŃ ĐłĐ°Ń€Ń‹Đ·Đ°ĐœŃ‚Đ°Đ»ŃŒĐœĐ°Đč сiĐœŃ…Ń€Đ°Đœiзацыi Ń€Đ°Đ·ĐłĐŸŃ€Ń‚Đși, цi Ń‡Đ°ŃŃ†Ń–ĐœŃ ĐČыĐČаЎу\n"
+"раЮĐșĐŸŃž эĐșŃ€Đ°ĐœŃƒ.\n"
+"\n"
+"ВЕЛЬМI ВАЖНА, Đșаб Đ°Đ±Ń€Đ°ĐœŃ‹ ĐČĐ°ĐŒi ĐŒĐ°ĐœiŃ‚ĐŸŃ€ ĐŒĐ”Ńž Ń‡Đ°ŃŃ†Ń–ĐœŃŽ сiĐœŃ…Ń€Đ°Đœiзацыi, яĐșая\n"
+"ĐœĐ” пДраĐČŃ‹ŃˆĐ°Đ” фаĐșŃ‚Ń‹Ń‡ĐœŃ‹Ń ĐŒĐ°ĐłŃ‡Ń‹ĐŒĐ°ŃŃ†i ĐČашага ĐŒĐ°ĐœiŃ‚ĐŸŃ€Ńƒ: у ĐżŃ€ĐŸŃ†iĐ»Đ”ĐłĐ»Ń‹ĐŒ ĐČыпаЮĐșу\n"
+"ĐČы ĐŒĐŸĐ¶Đ°Ń†Đ” сапсаĐČаць ĐŒĐ°ĐœiŃ‚ĐŸŃ€.\n"
+"Калi ĐČы ŃŃƒĐŒĐœŃĐČĐ°Đ”Ń†Đ”ŃŃ, Đ°Đ±ŃŃ€Ń‹Ń†Đ” ĐșĐ°ĐœŃĐ”Ń€ĐČĐ°Ń‚Ń‹ŃžĐœŃ‹Ń ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐși."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, fuzzy, c-format
-msgid "Yugoslavian (latin)"
-msgstr "АзДрбаĐčĐŽĐ¶Đ°ĐœŃĐșі (latin)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Đ’ŃŒĐ”Ń‚ĐœĐ°ĐŒŃĐși \"ĐœŃƒĐŒĐ°Ń€ раЮĐșĐ°\" QWERTY"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "US keyboard (international)"
-msgstr "US ĐșлаĐČiятура (ĐŒiĐ¶ĐœĐ°Ń€ĐŸĐŽĐœĐ°Ń)"
+msgid "Modify"
+msgstr "Đ—ĐŒŃĐœiць RAID"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "US keyboard"
-msgstr "US ĐșлаĐČiятура"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "UK keyboard"
-msgstr "UK ĐșлаĐČiятура"
+msgid "Need hostname, username and password!"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Ukrainian"
-msgstr "ĐŁĐșраiĐœŃĐși"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "бурэцĐși (ŃŃƒŃ‡Đ°ŃĐœĐ°Ń \"Q\" ĐŒĐ°ĐŽŃĐ»ŃŒ)"
+msgid "HardDrake"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "бурэцĐși (Ń‚Ń€Đ°ĐŽŃ‹Ń†Ń‹Ń‘ĐœĐ°Ń \"F\" ĐŒĐ°ĐŽŃĐ»ŃŒ)"
+msgid "new"
+msgstr "ĐœĐŸĐČы"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Tajik keyboard"
-msgstr "йаĐčсĐșая ĐșлаĐČiятура"
+msgid "Would you like to try again?"
+msgstr "ЖаЎаДцД ĐœĐ°ŃŃ‚Ń€ĐŸiць ĐżŃ€Ń‹ĐœŃ‚ŃŃ€?"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Thai keyboard"
-msgstr "йаĐčсĐșая ĐșлаĐČiятура"
+msgid "Wizard"
+msgstr "МаĐčстар стĐČĐ°Ń€ŃĐœĐœŃ"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "ĐŃ€ĐŒŃĐœŃĐși (typewriter)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr ""
+msgid "Edit selected server"
+msgstr "Đ’Ń‹ĐŽĐ°Đ»iць чаргу ЮруĐșу"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Serbian (cyrillic)"
-msgstr "АзДрбаĐčĐŽĐ¶Đ°ĐœŃĐșі (Đșірыліца)"
+msgid "Please choose where you want to backup"
+msgstr "Выбар паĐșДтаў ĐŽĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "ХлаĐČацĐși (QWERTY)"
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr "Каб ĐŒĐ°ĐŽŃ‹Ń„iĐșацыя таблiцы разЎзДлаў Đ·ĐŽĐ”ĐčŃĐœiĐ»Đ°ŃŃ, ĐżĐ°Ń‚Ń€ŃĐ±ĐœĐ° ĐżĐ”Ń€Đ°Đ·Đ°ĐłŃ€ŃƒĐ·ĐșĐ°."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "ХлаĐČацĐși (QWERTZ)"
+msgid "Do not include the browser cache"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Slovenian"
-msgstr "ХлаĐČĐ”ĐœŃĐși"
+msgid "Please, choose your keyboard layout."
+msgstr "Калi ласĐșĐ°, Đ°Đ±ŃŃ€Ń‹Ń†Đ” тып ĐșлаĐČiятуры."
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
-msgid "Swedish"
-msgstr "ĐšĐČДцĐși"
+msgid "Standard"
+msgstr "ĐĄŃ‚Đ°ĐœĐŽĐ°Ń€Ń‚ĐœŃ‹"
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Russian (Yawerty)"
-msgstr "РусĐși (ĐŻ-В-Е-Đ -Đą-И)"
+msgid "Please choose your mouse type."
+msgstr "ĐșĐ°Đ»i ласĐșĐ°, ĐżĐ°Đ·ĐœĐ°Ń‡Ń†Đ” тып ĐČашаĐč ĐŒŃ‹ŃˆŃ‹."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Russian"
-msgstr "РусĐși"
+msgid "Connect..."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Romanian (qwerty)"
-msgstr "РусĐși (ĐŻ-В-Е-Đ -Đą-И)"
+msgid "Failed to configure printer \"%s\"!"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Romanian (qwertz)"
-msgstr "РусĐși (ĐŻ-В-Е-Đ -Đą-И)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Canadian (Quebec)"
-msgstr "ĐšĐ°ĐœĐ°ĐŽŃĐși (КĐČĐ”Đ±ŃĐș)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Portuguese"
-msgstr "ĐŸĐ°Ń€Ń‚ŃƒĐłĐ°Đ»ŃŒŃĐși"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "ĐŸĐŸĐ»ŃŒŃĐși (qwertz расĐșлаЎĐșĐ°)"
+msgid "not configured"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° X Window"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Polish (qwerty layout)"
-msgstr "ĐŸĐŸĐ»ŃŒŃĐși (ŃŃ‚Đ°ĐœĐŽĐ°Ń€Ń‚ĐœĐ°Ń расĐșлаЎĐșĐ°)"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Norwegian"
-msgstr "НарĐČДжсĐși"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "About"
+msgstr "ĐĐŽĐŒŃĐœiць"
-#: ../../keyboard.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Dutch"
-msgstr "Đ“Đ°Đ»Đ°ĐœĐŽŃĐși"
+msgid "Proxies configuration"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° proxy Đșэшуючых сДрĐČДраў"
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Maltese (US)"
-msgstr ""
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Maltese (UK)"
-msgstr ""
+msgid "Start: sector %s\n"
+msgstr "ПачатаĐș: сДĐșтар %s\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "АзДрбаĐčĐŽĐ¶Đ°ĐœŃĐșі (Đșірыліца)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Myanmar (Burmese)"
-msgstr ""
+msgid "Network interface already configured"
+msgstr "ĐœĐ°ĐœiŃ‚ĐŸŃ€ паĐșŃƒĐ»ŃŒ ĐœĐ” ĐœĐ°ŃŃ‚Ń€ĐŸĐ”ĐœŃ‹"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Macedonian"
+msgid "Couldn't access the floppy!"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Malayalam"
+msgid "connecting to Bugzilla wizard ..."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../network/drakfirewall.pm:1
#, fuzzy, c-format
-msgid "Latvian"
-msgstr "Đ Đ°Đ·ĐŒĐ”Ń€ĐșĐ°ĐČĐ°ĐœĐœĐ”"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "ЛiŃ‚ĐŸŃžŃĐși \"Ń„Đ°ĐœĐ”Ń‚Ń‹Ń‡ĐœŃ‹\" QWERTY"
+msgid "Mail Server"
+msgstr "ХДрĐČДр ЮруĐșу"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "ЛiŃ‚ĐŸŃžŃĐși \"ĐœŃƒĐŒĐ°Ń€ раЮĐșĐ°\" QWERTY"
+msgid "Please click on a partition"
+msgstr "ĐĐ°Ń†Ń–ŃĐœŃ–Ń†Đ” ĐœĐ° разЎзДл"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "ЛiŃ‚ĐŸŃžŃĐși AZERTY (ĐœĐŸĐČы)"
+msgid "Linux"
+msgstr "Linux"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "ЛiŃ‚ĐŸŃžŃĐși AZERTY (стары)"
+msgid "Have a nice day!"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Laotian"
-msgstr "Đ Đ°Đ·ĐŒĐ”Ń€ĐșĐ°ĐČĐ°ĐœĐœĐ”"
+msgid "across Network"
+msgstr "ХДтĐșĐ°:"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Latin American"
-msgstr "ЛацiĐœĐ°-ĐĐŒĐ”Ń€Ń‹ĐșĐ°ĐœŃĐși"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Korean keyboard"
-msgstr "UK ĐșлаĐČiятура"
+msgid "Upgrade %s"
+msgstr "РазЎзДл %s"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Japanese 106 keys"
-msgstr "ĐŻĐżĐŸĐœŃĐși 106 ĐșлаĐČiш"
+msgid "Select Printer Connection"
+msgstr "Выбар тыпу Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Inuktitut"
+msgid "Scanning for TV channels in progress ..."
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Italian"
-msgstr "IŃ‚Đ°Đ»ŃŒŃĐœŃĐși"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Icelandic"
-msgstr "IŃĐ»Đ°ĐœĐŽŃĐși"
-
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Iranian"
-msgstr "IŃ€Đ°ĐœŃĐși"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "Iўрыт (Ń„Đ°ĐœĐ”Ń‚Ń‹Ń‡ĐœŃ‹)"
+msgid "IP Range Start:"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Israeli"
-msgstr "Iўрыт"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"IĐœŃ‚ŃŃ€ĐœŃŃ‚ ŃŃƒĐżĐ”Ń€ŃĐ”Ń€ĐČДр-ĐŽŃĐŒĐ°Đœ (Đ·Đ°ĐČДцца inetd) запусĐșĐ°Đ” пры старцД \n"
+"ĐșĐŸĐ»ŃŒĐșасць Ń€ĐŸĐ·ĐœŃ‹Ń… iĐœŃ‚ŃŃ€ĐœŃŃ‚ ŃĐ»ŃƒĐ¶Đ±Đ°Ńž, яĐșiя ĐœĐ”Đ°Đ±Ń…ĐŸĐŽĐœŃ‹. ĐŻĐłĐŸ ĐŒĐŸĐ¶ĐœĐ° ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць "
+"ĐŽĐ»Ń пусĐșу\n"
+"ŃˆĐŒĐ°Ń‚Đ»Ń–Đșіх ŃĐ»ŃƒĐ¶Đ±Đ°Ńž, уĐșлючаючы telnet, ftp, rsh i rlogin. БлаĐșуючы inetd, "
+"блаĐșŃƒĐ”ĐŒ\n"
+"усД ŃĐ»ŃƒĐ¶Đ±Ń‹, Đ·Đ° яĐșiя Ń‘Đœ Đ°ĐŽĐșĐ°Đ·ĐČĐ°Đ”."
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Croatian"
-msgstr "Đ„Đ°Ń€ĐČацĐși"
+msgid "the height of the progress bar"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hungarian"
-msgstr "МаЮьярсĐși"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Gurmukhi"
+msgid "Argentina"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Gujarati"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Greek"
-msgstr "ГрэчасĐși"
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "Domain Name Server"
+msgstr "IĐŒŃ ĐŽĐ°ĐŒĐ”ĐœŃƒ"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Đ“Ń€ŃƒĐ·iĐœŃĐși (\"ЛацiĐœŃĐșая\" расĐșлаЎĐșĐ°)"
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Security Level:"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐși ŃžĐ·Ń€ĐŸŃžĐœŃ Đ±ŃŃĐżĐ”Đși"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Đ“Ń€ŃƒĐ·iĐœŃĐși (\"РусĐșая\" расĐșлаЎĐșĐ°)"
+msgid "Mount points must begin with a leading /"
+msgstr "ĐŸŃƒĐœĐșт ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ паĐČiĐœĐ”Đœ ĐżĐ°Ń‡Ń‹ĐœĐ°Ń†Ń†Đ° Đ· /"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "French"
-msgstr "Đ€Ń€Đ°ĐœŃ†ŃƒĐ·ŃĐși"
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Postfix Mail Server"
+msgstr "ХДрĐČДр ЮруĐșу"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Finnish"
-msgstr "Đ€iĐœŃĐși"
+msgid "Quit without saving"
+msgstr "ВыĐčсцi бДз Đ·Đ°Ń…Đ°ĐČĐ°ĐœĐœŃ"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Spanish"
-msgstr "IŃĐżĐ°ĐœŃĐși"
+msgid "Yemen"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Estonian"
-msgstr "Đ­ŃŃ‚ĐŸĐœŃĐși"
-
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (US)"
+msgid "This product is available on the MandrakeStore Web site."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (НарĐČДжсĐși)"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Danish"
-msgstr "ДацĐși"
+msgid "Hard drive detection"
+msgstr "Đ’Ń‹Đ·ĐœĐ°Ń‡ŃĐœĐœĐ” Đ¶ĐŸŃ€ŃŃ‚Đșага ЮысĐșу"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Devanagari"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "German (no dead keys)"
-msgstr "ĐŃĐŒĐ”Ń†Đși (ĐœŃĐŒĐ° заблаĐșiраĐČĐ°ĐœŃ‹Ń… ĐșлаĐČiш)"
+#: ../../diskdrake/dav.pm:1
+#, fuzzy, c-format
+msgid "Please enter the WebDAV server URL"
+msgstr "Калі ласĐșĐ°, зрабіцД ĐœĐ”ĐșĐ°Đ»ŃŒĐșі рухаў ĐŒŃ‹ŃˆŃˆŃƒ."
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "German"
-msgstr "ĐŃĐŒĐ”Ń†Đși"
+msgid "Tajikistan"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Czech (QWERTY)"
-msgstr "ЧДшсĐși (QWERTY)"
+msgid "Accept"
+msgstr "ĐŸŃ€Ń‹ĐœŃŃ†ŃŒ"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Czech (QWERTZ)"
-msgstr "ЧДшсĐși (QWERTZ)"
+msgid "Description"
+msgstr "АпiŃĐ°ĐœĐœĐ”"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Swiss (French layout)"
-msgstr "ĐšĐČĐ”ĐčцарсĐși (Đ€Ń€Đ°ĐœŃ†ŃƒĐ·ŃĐșая расĐșлаЎĐșĐ°)"
+msgid "Error opening %s for writing: %s"
+msgstr "ĐŸĐ°ĐŒŃ‹Đ»ĐșĐ° Đ°ĐŽĐșрыцця %s ĐŽĐ»Ń Đ·Đ°Đżiсу: %s"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Swiss (German layout)"
-msgstr "ĐšĐČĐ”ĐčцарсĐși (ĐŃĐŒĐ”Ń†Đșая расĐșлаЎĐșĐ°)"
+msgid "Mouse type: %s\n"
+msgstr "бып ĐŒŃ‹ŃˆŃ‹: %s\n"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Belarusian"
-msgstr "Đ‘Đ”Đ»Đ°Ń€ŃƒŃĐșі"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr ""
+"Ваша ĐČiЮэаĐșарта ĐŒĐŸĐ¶Đ° ĐŒĐ”Ń†ŃŒ 3D-пасĐșĐ°Ń€ŃĐœĐœĐ”, яĐșĐŸĐ” ĐżĐ°ĐŽŃ‚Ń€Ń‹ĐŒĐ»iĐČаДцца Ń‚ĐŸĐ»ŃŒĐși XFree %"
+"s."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Bosnian"
-msgstr "Đ­ŃŃ‚ĐŸĐœŃĐși"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "Калi ласĐșĐ°, Đ°Đ±ŃŃ€Ń‹Ń†Đ” тып ĐșлаĐČiятуры."
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "БразiĐ»ŃŒŃĐși (ABNT-2)"
-
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Bulgarian (BDS)"
-msgstr "БалгарсĐși"
-
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "ĐŃ€ĐŒŃĐœŃĐși (Ń„Đ°ĐœĐ”Ń‚Ń‹Ń‡ĐœŃ‹)"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
-msgid "Bengali"
-msgstr "йаблiца"
+msgid "Expert Area"
+msgstr "Đ­ĐșспДрт"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Belgian"
-msgstr "Đ‘Đ”Đ»ŃŒĐłiĐčсĐși"
+msgid "Choose a monitor"
+msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” ĐŒĐ°ĐœiŃ‚ĐŸŃ€"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "АзДрбаĐčĐŽĐ¶Đ°ĐœŃĐșі (latin)"
+msgid "Empty label not allowed"
+msgstr "Пустая ĐŒĐ”Ń‚ĐșĐ° ĐœĐ” ĐŽĐ°Đ·ĐČĐ°Đ»ŃĐ”Ń†Ń†Đ°"
#: ../../keyboard.pm:1
#, c-format
-msgid "Arabic"
+msgid "Maltese (UK)"
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Armenian (phonetic)"
-msgstr "ĐŃ€ĐŒŃĐœŃĐși (Ń„Đ°ĐœĐ”Ń‚Ń‹Ń‡ĐœŃ‹)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Armenian (typewriter)"
-msgstr "ĐŃ€ĐŒŃĐœŃĐși (typewriter)"
-
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Armenian (old)"
-msgstr "ĐŃ€ĐŒŃĐœŃĐși (стары)"
-
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Albanian"
-msgstr "IŃ€Đ°ĐœŃĐși"
+msgid "I can't add any more partition"
+msgstr "ДаЮаць разЎзДл ĐœĐ”ĐŒĐ°ĐłŃ‡Ń‹ĐŒĐ°"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Polish"
-msgstr "ĐŸĐŸĐ»ŃŒŃĐși"
+msgid "Size in MB: "
+msgstr "ĐŸĐ°ĐŒĐ”Ń€ у ĐœĐ±:"
-#: ../../keyboard.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Dvorak"
-msgstr "Dvorak"
+msgid "Remote printer"
+msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Zimbabwe"
-msgstr "ĐŒĐŸĐ¶Đ° Đ±Ń‹Ń†ŃŒ"
+msgid "Please choose a language to use."
+msgstr "Калi ласĐșĐ°, Đ°Đ±ŃŃ€Ń‹Ń†Đ” ĐŒĐŸĐČу ĐŽĐ»Ń ĐșĐ°Ń€Ń‹ŃŃ‚Đ°ĐœĐœŃ."
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Zambia"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
msgstr ""
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
-#, c-format
-msgid "South Africa"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "I can set up your computer to automatically log on one user."
msgstr ""
+"ĐœĐŸĐ¶ĐœĐ° ĐœĐ°ŃŃ‚Ń€ĐŸiць сiŃŃ‚ŃĐŒŃƒ ĐŽĐ»Ń Đ°ŃžŃ‚Đ°ĐŒĐ°Ń‚Ń‹Ń‡ĐœĐ°ĐłĐ° ўĐČĐ°Ń…ĐŸĐŽŃƒ ў сiŃŃ‚ŃĐŒŃƒ ĐŽĐ»Ń\n"
+"Đ°ĐŽĐœĐ°ĐłĐŸ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°. Калi Вы ĐœĐ” жаЎаДцД гэтага, ĐœĐ°Ń†iŃĐœiцД \"ĐĐŽĐŒĐ”ĐœĐ°\"."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Serbia"
-msgstr "ĐżĐ°ŃĐ»ŃĐŽĐŸŃžĐœĐ°Ń"
+msgid "Floppy format"
+msgstr "Đ€Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœĐ”"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Mayotte"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Yemen"
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Generic Printers"
+msgstr "ĐŸŃ€Ń‹ĐœŃ‚ŃŃ€"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Samoa"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Wallis and Futuna"
+msgid "The scanners on this machine are available to other computers"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Vanuatu"
-msgstr ""
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "First sector of the root partition"
+msgstr "ĐŸĐ”Ń€ŃˆŃ‹ сДĐșтар Đ·Đ°ĐłŃ€ŃƒĐ·Đ°Ń‡ĐœĐ°ĐłĐ° Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ"
-#: ../../lang.pm:1
-#, c-format
-msgid "Vietnam"
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Alternative drivers"
+msgstr "ДруĐș тэстаĐČых ŃŃ‚Đ°Ń€ĐŸĐœĐ°Đș"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Virgin Islands (U.S.)"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Virgin Islands (British)"
-msgstr ""
+msgid "Initrd"
+msgstr "Initrd"
#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Cape Verde"
+msgstr "Đ—ĐłĐ°Ń€ĐœŃƒŃ†ŃŒ ЮрэĐČĐ°"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Venezuela"
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Saint Vincent and the Grenadines"
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
msgstr ""
#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Vatican"
-msgstr "Đ Đ°Đ·ĐŒĐ”Ń€ĐșĐ°ĐČĐ°ĐœĐœĐ”"
+msgid "Guam"
+msgstr "ЗабаĐČы"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Uzbekistan"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Uruguay"
+msgid "/Options/Test"
msgstr ""
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "United States Minor Outlying Islands"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
msgstr ""
+"Гэты ŃƒĐ·Ń€ĐŸĐČĐ”ĐœŃŒ ĐœĐ”Đ°Đ±Ń…ĐŸĐŽĐœĐ° ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць Đ· Đ°ŃŃ†ŃŃ€ĐŸĐłĐ°Đč. ĐĄiŃŃ‚ŃĐŒĐ° буЎзД прасцДĐč\n"
+"у ĐșĐ°Ń€Ń‹ŃŃ‚Đ°ĐœĐœi, алД i Đ±ĐŸĐ»ŃŒŃˆ Ń‡ŃƒŃ‚ĐœĐ°Đč: гэты ŃƒĐ·Ń€ĐŸĐČĐ”ĐœŃŒ Đ±ŃŃĐżĐ”Đși ĐœĐ”Đ»ŃŒĐłĐ° "
+"ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць\n"
+"ĐœĐ° ĐŒĐ°ŃˆŃ‹ĐœĐ°Ń…, яĐșiя ĐŽĐ°Đ»ŃƒŃ‡Đ°ĐœŃ‹ ĐŽĐ° сДтĐși цi ĐŽĐ° Internet. ĐŁĐČĐ°Ń…ĐŸĐŽ ĐœĐ” Đ°Đ±Đ°Ń€ĐŸĐœĐ”ĐœŃ‹ "
+"ĐżĐ°Ń€ĐŸĐ»Đ”ĐŒ."
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, fuzzy, c-format
-msgid "Uganda"
-msgstr "АЎĐșат"
+msgid "Mounting partition %s"
+msgstr "Đ€Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœĐ” Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ %s"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "User name"
+msgstr "IĐŒŃ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșу:"
+
+#: ../../network/isdn.pm:1
#, fuzzy, c-format
-msgid "Ukraine"
-msgstr "ĐŁĐșраiĐœŃĐși"
+msgid "New configuration (isdn-light)"
+msgstr "Đ—ĐœĐŸĐčĐŽĐ·Đ”ĐœĐ° ŃŃ–ŃŃ‚ŃĐŒĐ° сДтĐșĐ°ĐČĐ°Đč Đ±ŃŃĐżĐ”Đșі (firewall)!"
-#: ../../lang.pm:1
-#, c-format
-msgid "Tanzania"
-msgstr ""
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Userdrake"
+msgstr "ВыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць DiskDrake"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, fuzzy, c-format
-msgid "Taiwan"
-msgstr "Đ Đ°Đ·ĐŒĐ”Ń€ĐșĐ°ĐČĐ°ĐœĐœĐ”"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "ĐŸĐ°ĐŒĐ”Ń€Ń‹ яĐșĐŸĐłĐ° разЎзДла ĐČы жаЎаДцД Đ·ĐŒŃĐœiць?"
-#: ../../lang.pm:1
-#, c-format
-msgid "Tuvalu"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup system"
+msgstr "Настр. фаĐčлаĐČых сiŃŃ‚ŃĐŒĐ°Ńž"
-#: ../../lang.pm:1
-#, c-format
-msgid "Trinidad and Tobago"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Test pages"
+msgstr "ПраĐČДрĐșĐ° ĐżĐ°Ń€Ń‚ĐŸŃž"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Turkey"
+msgid ""
+"List of data to restore:\n"
+"\n"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Tonga"
-msgstr ""
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid "Checking %s"
+msgstr "ĐŸĐ°ĐŒĐ”Ń€Ń‹ эĐșŃ€Đ°ĐœŃƒ: %s\n"
-#: ../../lang.pm:1
-#, c-format
-msgid "Tunisia"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "TCP/Socket Printer Options"
+msgstr "Опцыi ŃĐŸĐșĐ”Ń‚Ńƒ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Turkmenistan"
-msgstr ""
+msgid "Card mem (DMA)"
+msgstr "АЮрасы ĐżĐ°ĐŒŃŃ†Ń– Đșарты (DMA)"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "East Timor"
-msgstr ""
+msgid "France"
+msgstr "Đ€Ń€Đ°ĐœŃ†Ń‹Ń"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Tokelau"
+msgid "browse"
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Tajikistan"
+msgid "Checking installed software..."
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Thailand"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remote printer name missing!"
+msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐČузДл"
-#: ../../lang.pm:1
-#, c-format
-msgid "Togo"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "ЖаЎаДцД пратэсцiраĐČаць ЮруĐș?"
#: ../../lang.pm:1
#, c-format
-msgid "French Southern Territories"
+msgid "Turkey"
msgstr ""
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Chad"
+msgid "Alcatel speedtouch usb"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Turks and Caicos Islands"
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Number of buttons"
+msgstr "2 ĐșĐœĐŸĐżĐși"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Swaziland"
-msgstr ""
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Đ’ŃŒĐ”Ń‚ĐœĐ°ĐŒŃĐși \"ĐœŃƒĐŒĐ°Ń€ раЮĐșĐ°\" QWERTY"
-#: ../../lang.pm:1
-#, c-format
-msgid "Syria"
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Module"
+msgstr "ĐŸĐŸŃ€Ń‚ ĐŒŃ‹ŃˆŃ‹"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "El Salvador"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Sao Tome and Principe"
+msgid "Hardware"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Suriname"
-msgstr "IĐŒŃ ĐŽĐ»Ń Ń€Đ°Đ·ĐŒĐ”Ń€ĐșĐ°ĐČĐ°ĐœĐ°ĐłĐ° рэсурсу"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Somalia"
-msgstr "NIS Domain"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Senegal"
-msgstr "йаблiца"
-
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "San Marino"
+msgid "Ctrl and Alt keys simultaneously"
msgstr ""
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Sierra Leone"
+msgid "United States"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Slovakia"
-msgstr "ХлаĐČĐ”ĐœŃĐși"
+msgid "Default OS?"
+msgstr "Па ĐŽĐ°ĐŒĐ°ŃžĐ»Đ”ĐœĐœŃŽ"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr ""
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Slovenia"
-msgstr "ХлаĐČĐ”ĐœŃĐși"
+msgid "Swiss (German layout)"
+msgstr "ĐšĐČĐ”ĐčцарсĐși (ĐŃĐŒĐ”Ń†Đșая расĐșлаЎĐșĐ°)"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Saint Helena"
+msgid "Configure all heads independently"
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Singapore"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Sudan"
-msgstr "SunOS"
+msgid "NTP Server"
+msgstr "NIS сДрĐČДр:"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, fuzzy, c-format
-msgid "Seychelles"
-msgstr "ĐĐ±Đ°Đ»ĐŸĐœĐșĐ°:"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Solomon Islands"
-msgstr ""
+msgid "Load/Save on floppy"
+msgstr "ЗахаĐČĐ°ĐœĐœĐ” ĐœĐ° ЮысĐșĐ”Ń‚Ńƒ"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Saudi Arabia"
+msgid "This theme does not yet have a bootsplash in %s !"
msgstr ""
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Rwanda"
-msgstr ""
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Russia"
-msgstr "РусĐși"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Romania"
-msgstr "NIS Domain"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Reunion"
-msgstr "ĐŸĐ°ĐŒĐ”Ń€Ń‹ эĐșŃ€Đ°ĐœŃƒ"
+msgid "nice"
+msgstr "ĐŽĐŸĐ±Ń€Đ°"
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
#, fuzzy, c-format
-msgid "Qatar"
-msgstr "СтартаĐČĐ°Đ” ĐŒĐ”ĐœŃŽ"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Palau"
-msgstr ""
+msgid "Leaving in %d seconds"
+msgstr "%d сДĐșŃƒĐœĐŽĐ°Ńž"
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Paraguay"
-msgstr ""
+msgid "Please choose which serial port your modem is connected to."
+msgstr "Да яĐșĐŸĐłĐ° ĐżĐ°ŃĐ»ŃĐŽĐŸŃžĐœĐ°ĐłĐ° ĐżĐŸŃ€Ń‚Ńƒ ĐŽĐ°Đ»ŃƒŃ‡Đ°ĐœŃ‹ ĐŒĐ°ĐŽŃĐŒ?"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Portugal"
-msgstr "ĐŸĐŸŃ€Ń‚"
+msgid "Country"
+msgstr "ĐœĐ°ĐœŃ†iраĐČĐ°ĐœĐœĐ”"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Palestine"
-msgstr "Асабiсты ĐČыбар паĐșДтаў"
+msgid "Property"
+msgstr "ĐŸĐŸŃ€Ń‚"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Puerto Rico"
+msgid "Ghostscript"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Pitcairn"
-msgstr "ĐŸŃ€Ń‹ĐœŃ‚ŃŃ€"
+msgid "LAN Configuration"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ°"
#: ../../lang.pm:1
#, c-format
-msgid "Saint Pierre and Miquelon"
+msgid "Ghana"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Poland"
-msgstr "IŃĐ»Đ°ĐœĐŽŃĐși"
-
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Pakistan"
+msgid "Path or Module required"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Philippines"
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Advanced Options"
+msgstr "ЗаĐșĐ°ĐœŃ‡ŃĐœĐœĐ” ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐși"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Papua New Guinea"
+msgid "Coma bug"
msgstr ""
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "French Polynesia"
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
msgstr ""
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Peru"
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Panama"
-msgstr ""
+msgid "There was an error installing packages:"
+msgstr "ĐŃ‚Ń€Ń‹ĐŒĐ°Đ»Đ°ŃŃ ĐżĐ°ĐŒŃ‹Đ»ĐșĐ° ўпараЮĐșĐ°ĐČĐ°ĐœĐœŃ паĐșДтаў:"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Oman"
-msgstr "NIS Domain"
+msgid "Lexmark inkjet configuration"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ Đ· IĐœŃ‚ŃŃ€ĐœŃŃ‚Đ°ĐŒ"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "New Zealand"
-msgstr ""
+msgid "Undo"
+msgstr "АЎĐșат"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Niue"
-msgstr "ĐłĐ°Đ»ŃŒŃˆŃ‚ŃƒĐș"
+msgid "Save partition table"
+msgstr "Запiс таблiцы разЎзДлаў"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Nauru"
-msgstr ""
+msgid "Finnish"
+msgstr "Đ€iĐœŃĐși"
#: ../../lang.pm:1
#, c-format
-msgid "Nepal"
+msgid "Macedonia"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Nicaragua"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Nigeria"
-msgstr "ĐżĐ°ŃĐ»ŃĐŽĐŸŃžĐœĐ°Ń"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovenian"
+msgstr "ХлаĐČĐ”ĐœŃĐși"
#: ../../lang.pm:1
#, c-format
-msgid "Norfolk Island"
+msgid "Libya"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Niger"
-msgstr "Đ’Ń‹ŃĐŸĐși"
-
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "New Caledonia"
-msgstr ""
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr "ĐšĐ°ĐœŃ„Ń–ĐłŃƒŃ€Đ°Ń†Ń‹Ń ŃŃ†ŃĐœĐ°Ń€Đ°Ńž, ŃƒŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” ПЗ, запусĐș ŃĐ»ŃƒĐ¶Đ±Đ°Ńž..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Namibia"
+msgid ""
+"\n"
+"- Burn to CD"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mozambique"
-msgstr ""
+msgid "Table"
+msgstr "йаблiца"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Malaysia"
-msgstr ""
+msgid "I don't know how to format %s in type %s"
+msgstr "ĐĐ” ĐČДЎаю яĐș Đ°ĐŽŃ„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČаць %s Đ· Ń‚Ń‹ĐżĐ°ĐŒ %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Mexico"
+msgid "Model"
msgstr "ĐŸĐŸŃ€Ń‚ ĐŒŃ‹ŃˆŃ‹"
-#: ../../lang.pm:1
-#, c-format
-msgid "Malawi"
-msgstr ""
-
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Maldives"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Mauritius"
-msgstr ""
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Stop Server"
+msgstr "NIS сДрĐČДр:"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Malta"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
msgstr ""
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "Montserrat"
+msgid "Modem"
msgstr "ĐŸĐŸŃ€Ń‚ ĐŒŃ‹ŃˆŃ‹"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Mauritania"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Martinique"
+msgid "Tuvalu"
msgstr ""
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "Northern Mariana Islands"
+msgid "Use auto detection"
msgstr ""
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Mongolia"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
msgstr ""
+"GPM ĐŽĐ°ĐŽĐ°Đ” ĐżĐ°ĐŽŃ‚Ń€Ń‹ĐŒĐșу ĐŒŃ‹ŃˆŃ‹ ĐŽĐ° ĐżŃ€Đ°ĐłŃ€Đ°ĐŒĐ°Ńž, яĐșiя працуюць у тэĐșстаĐČŃ‹ĐŒ Ń€ŃĐ¶Ń‹ĐŒĐ”,\n"
+"таĐșiх яĐș Midnight Commander. Гэта ĐŽĐ°Đ·ĐČĐ°Đ»ŃĐ” ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць ĐŒŃ‹Ńˆ пры "
+"ĐșĐ°ĐżiраĐČĐ°ĐœĐœi i ўстаўцы,\n"
+"i ўĐșлючаД ĐżĐ°ĐŽŃ‚Ń€Ń‹ĐŒĐșу ўсплыĐČаючых (pop-up) ĐŒĐ”ĐœŃŽ ў тэĐșстаĐČŃ‹ĐŒ Ń€ŃĐ¶Ń‹ĐŒĐ”."
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Myanmar"
+msgid "Started on boot"
msgstr ""
-#: ../../lang.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Mali"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Macedonia"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Marshall Islands"
+msgid "Automatically find available printers on remote machines"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Madagascar"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Moldova"
+msgid "East Timor"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Monaco"
-msgstr "ĐœĐ°ĐœiŃ‚ĐŸŃ€"
-
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Morocco"
+msgid "Del profile..."
msgstr ""
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Libya"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Latvia"
-msgstr "Đ Đ°Đ·ĐŒĐ”Ń€ĐșĐ°ĐČĐ°ĐœĐœĐ”"
+msgid "Installing Foomatic..."
+msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” паĐșĐ”Ń‚Ńƒ %s"
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Luxembourg"
-msgstr ""
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "Калi ласĐșĐ°, ĐČыĐčĐŽĐ·iцД, Đ° ĐżĐŸŃ‚Ń‹ĐŒ сĐșарыстаĐčцД Ctrl-Alt-BackSpace"
-#: ../../lang.pm:1
-#, c-format
-msgid "Lithuania"
-msgstr ""
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "detected"
+msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
-#: ../../lang.pm:1
-#, c-format
-msgid "Lesotho"
-msgstr ""
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr "Выбар паĐșДтаў ĐŽĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Liberia"
-msgstr "ĐżĐ°ŃĐ»ŃĐŽĐŸŃžĐœĐ°Ń"
+msgid "Package: "
+msgstr "ПаĐșДт"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Sri Lanka"
+msgid "Can't write /etc/sysconfig/bootsplash."
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Liechtenstein"
+msgid "SECURITY WARNING!"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Saint Lucia"
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "StarOffice"
+msgstr "ĐŽĐŸĐ±Ń€Đ°"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Lebanon"
+msgid "No, I don't want autologin"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Windows Migration tool"
+msgstr "НаĐČуĐșĐŸĐČыя прыĐșĐ»Đ°ĐŽĐ°ĐœĐœŃ–"
+
+#: ../../any.pm:1 ../../help.pm:1
+#, fuzzy, c-format
+msgid "All languages"
+msgstr "Выбар ĐŒĐŸĐČы"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Removing %s"
+msgstr "ĐŸĐ°ĐŒĐ”Ń€Ń‹ эĐșŃ€Đ°ĐœŃƒ: %s\n"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Testing your connection..."
+msgstr "ĐŻĐși тып ĐČашага ISDN Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ?"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cache size"
+msgstr "ĐżĐ°ĐŒĐ”Ń€ Đ±Đ»ĐŸĐșу"
+
+#: ../../security/level.pm:1
#, c-format
-msgid "Laos"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
msgstr ""
+"ĐŸĐ°Ń€ĐŸĐ»ŃŒ зараз уĐșĐ»ŃŽŃ‡Đ°ĐœŃ‹, алД ĐČыĐșĐ°Ń€Ń‹ŃŃ‚Đ°ĐœĐœĐ” ĐșĐ°ĐŒĐż'ютэру ў яĐșасцi сДтĐșĐ°ĐČага\n"
+"таĐșŃĐ°ĐŒĐ° ĐœĐ” рэĐșĐ°ĐŒĐ”ĐœĐŽĐ°ĐČĐ°ĐœĐ°."
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Kazakhstan"
-msgstr ""
+msgid "Start sector: "
+msgstr "ПачатĐșĐŸĐČы сДĐșтар:"
#: ../../lang.pm:1
#, c-format
-msgid "Cayman Islands"
+msgid "Congo (Brazzaville)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, fuzzy, c-format
-msgid "Kuwait"
-msgstr "ВыхаЮ"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr "Выбар паĐșДтаў ĐŽĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Korea"
-msgstr "ĐŸĐ”Ń€Đ°ĐœĐŸŃ"
+msgid "Seychelles"
+msgstr "ĐĐ±Đ°Đ»ĐŸĐœĐșĐ°:"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Korea (North)"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Bad password on %s"
+msgstr "ĐŃĐŒĐ° ĐżĐ°Ń€ĐŸĐ»ŃŽ"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Comoros"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Kiribati"
+msgid "Zambia"
msgstr ""
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Cambodia"
+msgid "Security Administrator (login or email)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Kyrgyzstan"
+msgid "Sorry, we support only 2.4 kernels."
msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Kenya"
-msgstr "КлаĐČiятура"
+msgid "Romanian (qwerty)"
+msgstr "РусĐși (ĐŻ-В-Е-Đ -Đą-И)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Japan"
+msgid "Under Devel ... please wait."
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Jordan"
-msgstr "IŃ€Đ°ĐœŃĐși"
-
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Jamaica"
+msgid "Czech Republic"
msgstr ""
#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Iceland"
-msgstr "IŃĐ»Đ°ĐœĐŽŃĐși"
+msgid "Egypt"
+msgstr "Пуста"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, fuzzy, c-format
-msgid "Iran"
-msgstr "IŃ€Đ°ĐœŃĐși"
+msgid "Old configuration (isdn4net)"
+msgstr "Đ—ĐœĐŸĐčĐŽĐ·Đ”ĐœĐ° ŃŃ–ŃŃ‚ŃĐŒĐ° сДтĐșĐ°ĐČĐ°Đč Đ±ŃŃĐżĐ”Đșі (firewall)!"
-#: ../../lang.pm:1
-#, c-format
-msgid "Iraq"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Sound card"
+msgstr "ĐĄŃ‚Đ°ĐœĐŽĐ°Ń€Ń‚ĐœŃ‹"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Import Fonts"
+msgstr "Đ€Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœĐ” разЎзДлаў"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
msgstr ""
+"Зараз ĐČы ĐŒĐ°Đ”Ń†Đ” Ń‚ĐŸĐ»ŃŒĐși Đ°ĐŽĐ·iĐœ ĐČŃĐ»iĐși разЎзДл FAT\n"
+"(яĐșі Đ·ĐČычаĐčĐœĐ° ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČĐ°Đ” MS Dos/Windows).\n"
+"ĐŸŃ€Đ°ĐżĐ°ĐœŃƒŃŽ, па-ĐżĐ”Ń€ŃˆĐ°Đ”, Đ·ĐŒŃĐœiць ĐżĐ°ĐŒĐ”Ń€Ń‹ разЎзДла\n"
+"(ĐșĐ»iĐșĐœiцД ĐœĐ° ŃĐłĐŸ, Đ° ĐżĐŸŃ‚Ń‹ĐŒ ĐœĐ° \"Đ·ĐŒŃĐœĐ”ĐœĐœĐ” ĐżĐ°ĐŒĐ”Ń€Đ°Ńž\")"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "British Indian Ocean Territory"
+msgid "Suppress Temporary Files"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "India"
-msgstr "IŃ€Đ°ĐœŃĐși"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Israel"
-msgstr "Iўрыт"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Change partition type"
+msgstr "Đ—ĐŒŃĐœiць тып Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "Ireland"
-msgstr "IŃĐ»Đ°ĐœĐŽŃĐși"
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "Indonesia"
-msgstr "ĐœŃĐŒĐ°"
+msgid "Network Options"
+msgstr "Опцыi ĐŒĐŸĐŽŃƒĐ»ŃŽ:"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Hungary"
-msgstr "МаЮьярсĐși"
+#: ../../standalone/drakboot:1
+#, c-format
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Haiti"
+msgid "Statistics"
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/cups.pm:1
#, fuzzy, c-format
-msgid "Croatia"
-msgstr "Đ„Đ°Ń€ĐČацĐși"
+msgid "(on %s)"
+msgstr "(ĐŒĐŸĐŽŃƒĐ»ŃŒ %s)"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Honduras"
+msgid "MM Series"
+msgstr "MM Series"
+
+#: ../../security/level.pm:1
+#, c-format
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Heard and McDonald Islands"
+msgid "average"
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "New printer name"
+msgstr "IĐŒŃ ЮруĐșарĐși"
+
#: ../../lang.pm:1
#, c-format
-msgid "Hong Kong"
+msgid "Equatorial Guinea"
msgstr ""
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "China"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Build Backup"
+msgstr "Đ”Ń€ŃĐœĐœŃ‹ фаĐčĐ» Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČĐ°Đč ĐșĐŸĐżii"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Guyana"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Guinea-Bissau"
+msgid "Currently, no alternative possibility is available"
msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Guam"
-msgstr "ЗабаĐČы"
+msgid "Romanian (qwertz)"
+msgstr "РусĐși (ĐŻ-В-Е-Đ -Đą-И)"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Guatemala"
-msgstr "Клюз"
+msgid "Write Config"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° X Window"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "South Georgia and the South Sandwich Islands"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
msgstr ""
+"Đ”ŃĐŒĐ°Đœ ĐŒĐ°Ń€ŃˆŃ€ŃƒŃ‚Ń‹Đ·Đ°Ń†Ń‹i ĐŽĐ°Đ·ĐČĐ°Đ»ŃĐ” ĐŽŃ‹ĐœĐ°ĐŒiŃ‡ĐœŃ‹ĐŒ таблiŃ†Đ°ĐŒ IP ĐŒĐ°Ń€ŃˆŃ€ŃƒŃ‚Ń‹Đ·Đ°Ń†Ń‹i\n"
+"Đ°ĐŽĐœĐ°ŃžĐ»ŃŃ†Ń†Đ° праз RIP пратаĐșĐŸĐ». RIP ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаДцца ў ĐŒĐ°Đ»Ń‹Ń… сДтĐșах, Đ±ĐŸĐ»ŃŒŃˆ\n"
+"сĐșĐ»Đ°ĐŽĐ°ĐœŃ‹Ń пратаĐșĐŸĐ»Ń‹ ĐŒĐ°Ń€ŃˆŃ€ŃƒŃ‚Ń‹Đ·Đ°Ń†Ń‹i - у ĐČŃĐ»iĐșiх сДтĐșах."
#: ../../lang.pm:1
#, c-format
-msgid "Equatorial Guinea"
+msgid "Kiribati"
msgstr ""
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Guadeloupe"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Guinea"
-msgstr "ĐĐłŃƒĐ»ŃŒĐœŃ‹"
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "Browse"
+msgstr "ĐŸŃ€Đ°ĐłĐ»ŃĐŽ"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Gambia"
+msgid "CDROM"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Greenland"
-msgstr "IŃĐ»Đ°ĐœĐŽŃĐși"
-
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Gibraltar"
-msgstr ""
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "ĐŠi жаЎаДцД зараз паспрабаĐČаць ĐŽĐ°Đ»ŃƒŃ‡Ń‹Ń†Ń†Đ° ĐŽĐ° IĐœŃ‚ŃŃ€ĐœŃŃ‚Ńƒ?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Ghana"
+msgid "Belgian"
+msgstr "Đ‘Đ”Đ»ŃŒĐłiĐčсĐși"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Do you have an ISA sound card?"
+msgstr "ĐŠi ёсць у ĐČас iĐœŃˆŃ‹?"
+
+#: ../../network/ethernet.pm:1
+#, fuzzy, c-format
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
msgstr ""
+"Нi ĐČĐŸĐŽĐœŃ‹ ethernet сДтĐșĐ°ĐČы аЮаптар у ĐČашаĐč сiŃŃ‚ŃĐŒĐ” ĐœĐ” ĐČŃ‹Đ·ĐœĐ°Ń‡Đ°ĐœŃ‹. Калi ласĐșĐ°, "
+"сĐșарыстаĐčцД ĐșĐ°ĐœŃ„iгурацыĐčĐœŃ‹ iĐœŃŃ‚Ń€ŃƒĐŒŃĐœŃ‚."
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, fuzzy, c-format
-msgid "French Guiana"
-msgstr "Đ€Ń€Đ°ĐœŃ†ŃƒĐ·ŃĐși"
+msgid "Windows"
+msgstr "НаĐČуĐșĐŸĐČыя прыĐșĐ»Đ°ĐŽĐ°ĐœĐœŃ–"
-#: ../../lang.pm:1
+#: ../../common.pm:1
#, fuzzy, c-format
-msgid "Georgia"
-msgstr "НарĐČДжсĐși"
+msgid "Can't make screenshots before partitioning"
+msgstr "ДаЮаць разЎзДл ĐœĐ”ĐŒĐ°ĐłŃ‡Ń‹ĐŒĐ°"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Host Name"
+msgstr "IĐŒŃ ĐŒĐ°ŃˆŃ‹ĐœŃ‹"
+
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Grenada"
+msgid "/File/Save _As"
msgstr ""
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "United Kingdom"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Gabon"
+msgid "%s is not in the scanner database, configure it manually?"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "Delay before booting default image"
+msgstr "Đ—Đ°Ń‚Ń€Ń‹ĐŒĐșĐ° пДраЎ Đ·Đ°ĐłŃ€ŃƒĐ·ĐșĐ°Đč ĐČĐŸĐ±Ń€Đ°Đ·Ńƒ па ĐŽĐ°ĐŒĐ°ŃžĐ»Đ”ĐœĐœŃŽ"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Restrict command line options"
+msgstr "ĐĐ±ĐŒĐ”Đ¶Đ°ĐČĐ°ĐœĐœĐ” ĐŸĐżŃ†Ń‹ŃŃž ĐșĐ°ĐŒĐ°ĐœĐŽĐœĐ°ĐłĐ° раЮĐșĐ°"
+
+#: ../../standalone/drakxtv:1
#, fuzzy, c-format
-msgid "Faroe Islands"
-msgstr "IŃĐ»Đ°ĐœĐŽŃĐși"
+msgid "East Europe"
+msgstr "Đ•ŃžŃ€ĐŸĐżĐ°"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Micronesia"
+msgid "Use free space"
+msgstr "ВыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць ĐœĐ”Đ·Đ°ĐœŃŃ‚ŃƒŃŽ ĐżŃ€Đ°ŃŃ‚ĐŸŃ€Ńƒ"
+
+#: ../../network/adsl.pm:1
+#, c-format
+msgid "use dhcp"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Falkland Islands (Malvinas)"
+msgid "Mail alert"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Fiji"
-msgstr "Đ€iĐœŃĐși"
+#: ../../network/tools.pm:1
+#, c-format
+msgid "Internet configuration"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ Đ· IĐœŃ‚ŃŃ€ĐœŃŃ‚Đ°ĐŒ"
#: ../../lang.pm:1
#, c-format
-msgid "Finland"
+msgid "Uzbekistan"
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Ethiopia"
-msgstr "Đ­ŃŃ‚ĐŸĐœŃĐși"
+msgid "Detected %s"
+msgstr "Đ”ŃƒĐ±Đ»ŃĐČĐ°ĐœĐœĐ” ĐżŃƒĐœĐșту ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Spain"
-msgstr "IŃĐżĐ°ĐœŃĐși"
+msgid "/Autodetect _printers"
+msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
-#: ../../lang.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
#, fuzzy, c-format
-msgid "Eritrea"
-msgstr "Đ­ĐșспДрт"
+msgid "Finish"
+msgstr "Đ€iĐœŃĐși"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Western Sahara"
+msgid "Show automatically selected packages"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Egypt"
-msgstr "Пуста"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "CPU flags reported by the kernel"
+msgstr ""
#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Estonia"
-msgstr "Đ­ŃŃ‚ĐŸĐœŃĐși"
+#, c-format
+msgid "Togo"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Ecuador"
+msgid "Something went wrong! - Is mkisofs installed?"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Algeria"
-msgstr "ĐżĐ°ŃĐ»ŃĐŽĐŸŃžĐœĐ°Ń"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "16 MB"
+msgstr "16 ĐœĐ±"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Dominican Republic"
-msgstr ""
+msgid "Please try again"
+msgstr "ĐŸĐ°ŃĐżŃ€Đ°Đ±ŃƒĐčцД яшчэ раз"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Dominica"
-msgstr "NIS Domain"
+msgid "The model is correct"
+msgstr "Гэта ĐŽĐ°ĐșĐ»Đ°ĐŽĐœĐ°?"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Denmark"
-msgstr ""
+msgid "FAT resizing failed: %s"
+msgstr "ĐŃžŃ‚Đ°Đ·ĐŒŃĐœĐ”ĐœĐœĐ” ĐżĐ°ĐŒĐ”Ń€Đ°Ńž ĐœĐ” Đ°Ń‚Ń€Ń‹ĐŒĐ°Đ»Đ°ŃŃ ĐŽĐ»Ń Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ FAT %s"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Individual package selection"
+msgstr "Асабiсты ĐČыбар паĐșДтаў"
+
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Djibouti"
-msgstr "ĐĐŽĐŒŃĐœiць"
+msgid "This partition is not resizeable"
+msgstr "ĐŸĐ°ĐŒĐ”Ń€Ń‹ яĐșĐŸĐłĐ° разЎзДла ĐČы жаЎаДцД Đ·ĐŒŃĐœiць?"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Cyprus"
-msgstr ""
+msgid "Location"
+msgstr "Đ Đ°Đ·ĐŒĐ”Ń€ĐșĐ°ĐČĐ°ĐœĐœĐ”"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Christmas Island"
+msgid "USA (cable-hrc)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, fuzzy, c-format
-msgid "Cape Verde"
-msgstr "Đ—ĐłĐ°Ń€ĐœŃƒŃ†ŃŒ ЮрэĐČĐ°"
+msgid "Journalised FS"
+msgstr "ĐżĐ°ĐŒŃ‹Đ»ĐșĐ° ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ"
#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Guatemala"
+msgstr "Клюз"
+
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Cuba"
+msgid "This machine"
msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Colombia"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "Лiтара ĐŽĐ»Ń DOS-ЮысĐșу: %s (ĐœĐ°ŃžĐłĐ°ĐŽ)\n"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Select the files or directories and click on 'OK'"
msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Cameroon"
+msgid "Bahrain"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
-msgid "Chile"
-msgstr "ĐŸĐŸŃ€Ń‚ ĐŒŃ‹ŃˆŃ‹"
+msgid "omit scsi modules"
+msgstr "Đ ŃĐ¶Ń‹ĐŒ Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Cook Islands"
+msgid "family of the cpu (eg: 6 for i686 class)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Cote d'Ivoire"
+msgid ""
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
msgstr ""
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Switzerland"
-msgstr ""
+msgid "Keyboard layout: %s\n"
+msgstr "бып ĐșлаĐČiятуры: %s\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congo (Brazzaville)"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Central African Republic"
+msgid "Maltese (US)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Congo (Kinshasa)"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
msgstr ""
+"ĐœĐ°ĐœŃ†iраĐČаць i Ń€Đ°Đ·ĐŒĐ°ĐœŃ†iраĐČаць усД сДтĐșĐ°ĐČыя фаĐčлаĐČыя сiŃŃ‚ŃĐŒŃ‹ (NFS),\n"
+" SMB (Lan Manager/Windows) i NCP (Netware) ĐżŃƒĐœĐșты ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ."
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Cocos (Keeling) Islands"
+msgid "Tvcard"
msgstr ""
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Canada"
-msgstr "ĐšĐ°ĐœĐ°ĐŽŃĐși (КĐČĐ”Đ±ŃĐș)"
+msgid "Toggle between normal/expert mode"
+msgstr "ЗĐČычаĐčĐœŃ‹ Ń€ŃĐ¶Ń‹ĐŒ"
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
-msgid "Belize"
-msgstr "Đ—ĐŒŃĐœĐ”ĐœĐœĐ” ĐżĐ°ĐŒĐ”Ń€Đ°Ńž"
+msgid "Size"
+msgstr "ĐŸĐ°ĐŒĐ”Ń€: %s"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Belarus"
-msgstr "Đ‘Đ”Đ»Đ°Ń€ŃƒŃĐșі"
+#: ../../help.pm:1
+#, c-format
+msgid "GRUB"
+msgstr ""
#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Botswana"
-msgstr "Đ­ŃŃ‚ĐŸĐœŃĐși"
+msgid "Greenland"
+msgstr "IŃĐ»Đ°ĐœĐŽŃĐși"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Bouvet Island"
-msgstr ""
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bhutan"
+msgid "Not the correct tape label. Tape is labelled %s."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Bahamas"
+msgid ""
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Delete All NBIs"
+msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” фаĐčĐ»"
+
+#: ../../help.pm:1
#, c-format
-msgid "Brazil"
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
msgstr ""
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Bolivia"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
msgstr ""
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Brunei Darussalam"
-msgstr ""
+msgid "Which configuration of XFree do you want to have?"
+msgstr "ĐŻĐșую ĐșĐ°ĐœŃ„iгурацыю XFree ĐČы жаЎаДцД Đ°Ń‚Ń€Ń‹ĐŒĐ°Ń†ŃŒ?"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Bermuda"
-msgstr "ĐŃĐŒĐ”Ń†Đși"
+msgid "More"
+msgstr "ĐŸĐ”Ń€Đ°ĐœĐŸŃ"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Benin"
-msgstr "Đ‘Đ”Đ»ŃŒĐłiĐčсĐși"
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+"На ĐłŃŃ‚Đ°ĐŒ ŃƒĐ·Ń€ĐŸŃžĐœĐ” Đ±ŃŃĐżĐ”Đși ĐŒĐ°ĐłŃ‡Ń‹ĐŒĐ° ĐČыĐșĐ°Ń€Ń‹ŃŃ‚Đ°ĐœĐœĐ” сiŃŃ‚ŃĐŒŃ‹ ў яĐșасцi\n"
+"сДрĐČĐ”Ń€Ńƒ. ĐŁĐ·Ń€ĐŸĐČĐ”ĐœŃŒ Đ±ŃŃĐżĐ”Đși ЮастатĐșĐŸĐČĐ° ĐČŃ‹ŃĐŸĐși ĐŽĐ»Ń Ń€Đ°Đ±ĐŸŃ‚Ń‹\n"
+"сДрĐČĐ”Ń€Ńƒ, яĐși ЎапусĐșĐ°Đ” Đ·Đ»ŃƒŃ‡ŃĐœĐœi са ŃˆĐŒĐ°Ń‚Đ»iĐșiĐŒi ĐșĐ»iĐ”ĐœŃ‚Đ°ĐŒi."
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Burundi"
-msgstr ""
+msgid "Account Password"
+msgstr "ĐŸĐ°Ń€ĐŸĐ»ŃŒ ĐŽĐ»Ń ўĐČĐ°Ń…ĐŸĐŽŃƒ"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Bahrain"
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Bulgaria"
-msgstr "МаЮьярсĐși"
+msgid "Tajik keyboard"
+msgstr "йаĐčсĐșая ĐșлаĐČiятура"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Burkina Faso"
+msgid ""
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Bangladesh"
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Font List"
+msgstr "ĐšŃ€ĐŸĐżĐșĐ° ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Barbados"
+msgid ""
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bosnia and Herzegovina"
+msgid ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Azerbaijan"
-msgstr "IŃ€Đ°ĐœŃĐși"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Aruba"
-msgstr "Grub"
-
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "Australia"
-msgstr "ĐżĐ°ŃĐ»ŃĐŽĐŸŃžĐœĐ°Ń"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Select file"
+msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” фаĐčĐ»"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "American Samoa"
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
msgstr ""
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Argentina"
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Antarctica"
+msgid "Japan"
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Print option list"
+msgstr "Опцыi ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
+
+#: ../../standalone/localedrake:1
#, c-format
-msgid "Angola"
+msgid "The change is done, but to be effective you must logout"
msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Search servers"
+msgstr "DNS сДрĐČДр"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Netherlands Antilles"
+msgid "NCP queue name missing!"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Armenia"
-msgstr "ĐŃ€ĐŒŃĐœŃĐși (стары)"
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid ""
+"Warning, another internet connection has been detected, maybe using your "
+"network"
+msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Albania"
-msgstr "IŃ€Đ°ĐœŃĐși"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Cd-Rom labeled \"%s\""
+msgstr "Cd-Rom ĐżĐ°Đ·ĐœĐ°Ń‡Đ°ĐœŃ‹ \"%s\""
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Anguilla"
+msgid ""
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
msgstr ""
+"ЗахаĐČаць i Đ°ĐŽĐœĐ°ĐČiць сiŃŃ‚ŃĐŒĐœŃ‹ ŃĐœŃ‚Ń€Đ°ĐżiĐčĐœŃ‹ пул ĐŽĐ»Ń ĐČŃ‹ŃĐŸĐșĐ°Đč яĐșасцi\n"
+"ĐłĐ”ĐœĐ”Ń€Đ°Ń†Ń‹Ń– ĐČыпаЮĐșĐŸĐČых ліĐșаў."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Antigua and Barbuda"
+msgid ""
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "United Arab Emirates"
+msgid "Turn your computer into a reliable server"
msgstr ""
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "Andorra"
-msgstr "АЎĐșат"
+msgid " (driver %s)"
+msgstr "ХДрĐČДр XFree86: %s\n"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Afghanistan"
-msgstr "IŃ€Đ°ĐœŃĐși"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
+msgid ""
+"Loopback file(s):\n"
+" %s\n"
+msgstr "ЀаĐčĐ»(ы) ĐČiŃ€Ń‚ŃƒĐ°Đ»ŃŒĐœĐ°Đč фаĐčлаĐČĐ°Đč сiŃŃ‚ŃĐŒŃ‹: %s\n"
-#: ../../loopback.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Circular mounts %s\n"
-msgstr "ĐœĐ°ĐœŃ†iраĐČĐ°ĐœĐœĐ” ЮысĐșу %s\n"
+msgid "I don't know"
+msgstr "ĐĐ” ĐČŃĐŽĐŸĐŒĐ°"
-#: ../../lvm.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Remove the logical volumes first\n"
+msgid ", TCP/IP host \"%s\", port %s"
msgstr ""
-#: ../../modules.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
msgstr ""
-#: ../../mouse.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "Đ ŃƒŃˆŃ†Đ” ĐșĐŸĐ»Đ°ĐŒ ĐŒŃ‹ŃˆŃ‹!"
+msgid ""
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "To activate the mouse,"
-msgstr "Калі ласĐșĐ°, зрабіцД ĐœĐ”ĐșĐ°Đ»ŃŒĐșі рухаў ĐŒŃ‹ŃˆŃˆŃƒ."
+msgid "Post Uninstall"
+msgstr "ЗаĐșĐ°ĐœŃ‡ŃĐœĐœĐ” ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Please test the mouse"
-msgstr "Калі ласĐșĐ°, зрабіцД ĐœĐ”ĐșĐ°Đ»ŃŒĐșі рухаў ĐŒŃ‹ŃˆŃˆŃƒ."
+msgid " ("
+msgstr ""
-#: ../../mouse.pm:1
-#, c-format
-msgid "No mouse"
-msgstr "ĐŃĐŒĐ° ĐŒŃ‹ŃˆŃ‹"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cpuid level"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐși ŃžĐ·Ń€ĐŸŃžĐœŃ Đ±ŃŃĐżĐ”Đși"
-#: ../../mouse.pm:1
-#, c-format
-msgid "none"
-msgstr "ĐœŃĐŒĐ°"
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Mongolian (cyrillic)"
+msgstr "АзДрбаĐčĐŽĐ¶Đ°ĐœŃĐșі (Đșірыліца)"
-#: ../../mouse.pm:1
-#, c-format
-msgid "3 buttons"
-msgstr "3 ĐșĐœĐŸĐżĐși"
+#: ../../standalone/drakfloppy:1
+#, fuzzy, c-format
+msgid "Add a module"
+msgstr "ДаЮаць ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°"
-#: ../../mouse.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "2 buttons"
-msgstr "2 ĐșĐœĐŸĐżĐși"
+msgid "Profile to delete:"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "1 button"
-msgstr "2 ĐșĐœĐŸĐżĐși"
+msgid "Local measure"
+msgstr "ЛаĐșĐ°Đ»ŃŒĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
#: ../../mouse.pm:1
#, fuzzy, c-format
msgid "busmouse"
msgstr "ĐŃĐŒĐ° ĐŒŃ‹ŃˆŃ‹"
-#: ../../mouse.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid "Account Login (user name)"
+msgstr "IĐŒŃ ĐŽĐ»Ń ўĐČĐ°Ń…ĐŸĐŽŃƒ (iĐŒŃ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșу)"
-#: ../../mouse.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (ĐżĐ°ŃĐ»ŃĐŽĐŸŃžĐœĐ°Ń, стары тып C7)"
+msgid "Fdiv bug"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid ""
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Benin"
+msgstr "Đ‘Đ”Đ»ŃŒĐłiĐčсĐși"
+
+#: ../../lang.pm:1
#, c-format
-msgid "MM Series"
-msgstr "MM Series"
+msgid "Uruguay"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Path selection"
+msgstr "Асабiсты ĐČыбар паĐșДтаў"
+
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid "Name/IP address of host:"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "Monitor: %s\n"
+msgstr "ĐœĐ°ĐœiŃ‚ĐŸŃ€: %s\n"
-#: ../../mouse.pm:1
+#: ../../partition_table/raw.pm:1
#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
+msgid ""
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer host name or IP missing!"
+msgstr "IĐŒŃ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check all users that you want to include in your backup."
+msgstr "Выбар паĐșДтаў ĐŽĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
+
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+msgid ""
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid "Bangladesh"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "Japan (cable)"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "ЗĐČычаĐčĐœĐ°Ń ĐŒŃ‹Ńˆ Đ· 3 ĐșĐœĐŸĐżĐșĐ°ĐŒŃ–"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "ЗĐČычаĐčĐœĐ°Ń ĐŒŃ‹Ńˆ Đ· 2 ĐșĐœĐŸĐżĐșĐ°ĐŒŃ–"
+msgid "Initial tests"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "serial"
-msgstr "ĐżĐ°ŃĐ»ŃĐŽĐŸŃžĐœĐ°Ń"
+msgid "Continue"
+msgstr "ĐŸŃ€Đ°Ń†ŃĐłĐœŃƒŃ†ŃŒ"
-#: ../../mouse.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft IntelliMouse"
+msgid "Custom Restore"
+msgstr "Па ĐČŃ‹Đ±Đ°Ń€Ńƒ"
-#: ../../mouse.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Wheel"
-msgstr "З ĐșĐŸĐ»Đ°ĐŒ"
+msgid ""
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
+msgstr ""
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Generic"
-msgstr "ĐĐłŃƒĐ»ŃŒĐœŃ‹"
+msgid "Script-based"
+msgstr "ĐœĐ° Đ°ŃĐœĐŸĐČĐ” сĐșрыпту"
-#: ../../mouse.pm:1
+#: ../../install_any.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid "Error reading file %s"
+msgstr "ĐŸĐ°ĐŒŃ‹Đ»ĐșĐ° Ń‡Ń‹Ń‚Đ°ĐœĐœŃ фаĐčлу %s"
-#: ../../mouse.pm:1
-#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "PLL setting:"
+msgstr "Ń„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœĐ”"
-#: ../../mouse.pm:1
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
#, fuzzy, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "ЗĐČычаĐčĐœĐ°Ń ĐŒŃ‹Ńˆ Đ· 2 ĐșĐœĐŸĐżĐșĐ°ĐŒŃ–"
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "Вы паĐČiĐœĐœŃ‹ ĐŒĐ”Ń†ŃŒ разЎзДл swap"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+msgid " on "
+msgstr ""
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Standard"
-msgstr "ĐĄŃ‚Đ°ĐœĐŽĐ°Ń€Ń‚ĐœŃ‹"
+msgid "The URL must begin with http:// or https://"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - Мыш"
+msgid ""
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
+msgstr ""
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "ĐŸĐ”Ń€Đ°ĐșĐ»ŃŽŃ‡ŃĐœĐœĐ” ĐżĐ°ĐŒiж упараЮĐșĐ°ĐČĐ°ĐœĐœĐ”ĐŒ па ĐłŃ€ŃƒĐżĐ” i Đ°ŃĐŸĐ±Đșах"
+msgid "Other OS (SunOS...)"
+msgstr "IĐœŃˆĐ°Ń АХ (SunOS,...)"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Collapse Tree"
-msgstr "Đ—ĐłĐ°Ń€ĐœŃƒŃ†ŃŒ ЮрэĐČĐ°"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Install/Upgrade"
+msgstr "УсталёўĐșĐ°"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Expand Tree"
-msgstr "Đ Đ°Đ·ĐłĐ°Ń€ĐœŃƒŃ†ŃŒ ЮрэĐČĐ°"
+msgid "%d packages"
+msgstr "%d паĐșДтаў"
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Info"
-msgstr "IĐœŃ„Đ°Ń€ĐŒĐ°Ń†Ń‹Ń"
+msgid ""
+"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
+"Backup and Restore application\n"
+"\n"
+"--default : save default directories.\n"
+"--debug : show all debug messages.\n"
+"--show-conf : list of files or directories to backup.\n"
+"--config-info : explain configuration file options (for non-X "
+"users).\n"
+"--daemon : use daemon configuration. \n"
+"--help : show this message.\n"
+"--version : show version number.\n"
+msgstr ""
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Is this correct?"
-msgstr "Гэта ĐŽĐ°ĐșĐ»Đ°ĐŽĐœĐ°?"
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Domain Authentication Required"
+msgstr "ĐŃžŃ‚ŃĐœŃ‚Ń‹Ń„iĐșацыя"
-#: ../../my_gtk.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgid ""
+"\n"
+"\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
msgstr ""
-#: ../../partition_table.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Error writing to file %s"
-msgstr "ĐŸĐ°ĐŒŃ‹Đ»ĐșĐ° Đ·Đ°Đżiсу ў фаĐčĐ» %s"
+msgid "Costa Rica"
+msgstr ""
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Bad backup file"
-msgstr "Đ”Ń€ŃĐœĐœŃ‹ фаĐčĐ» Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČĐ°Đč ĐșĐŸĐżii"
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid "Use libsafe for servers"
+msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” ЮаЮатĐșĐŸĐČыя ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐși ĐŽĐ»Ń сДрĐČДра"
-#: ../../partition_table.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "ĐĐŽĐœĐ°ŃžĐ»Đ”ĐœĐœĐ” Đ· фаĐčла %s ĐœĐ” Đ°Ń‚Ń€Ń‹ĐŒĐ°Đ»Đ°ŃŃ: %s"
+msgid "Icelandic"
+msgstr "IŃĐ»Đ°ĐœĐŽŃĐși"
-#: ../../partition_table.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
msgstr ""
-"Вы ĐŒĐ°Đ”Ń†Đ” ĐŽĐ·iрĐșу ў таблiцы раЎзДлаў, алД я ĐœĐ” ĐŒĐ°ŃŽ ĐŒĐ°ĐłŃ‡Ń‹ĐŒĐ°ŃŃ†i ŃĐ” сĐșарыстаць.\n"
-"АЎзiĐœŃ‹ ĐČыхаЮ у Ń‚Ń‹ĐŒ, Đșаб ĐżĐ”Ń€Đ°ĐŒŃŃŃ†iць ĐżĐ”Ń€ŃˆĐ°ŃĐœŃ‹Ń разЎзДлы таĐș, Đșаб ĐŽĐ·iрĐșĐ° iшла\n"
-"Đ°ĐŽŃ€Đ°Đ·Ńƒ Đ·Đ° ĐżĐ°ŃˆŃ‹Ń€Đ°ĐœŃ‹ĐŒ (extended) Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Đ°ĐŒ"
-#: ../../partition_table.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "ĐŸĐ°ŃˆŃ‹Ń€Đ°ĐœŃ‹ разЎзДл ĐœĐ” ĐżĐ°ĐŽŃ‚Ń€Ń‹ĐŒĐ»iĐČаДцца гэтаĐč ĐżĐ»Đ°Ń‚Ń„ĐŸŃ€ĐŒĐ°Đč"
+msgid "Please relog into %s to activate the changes"
+msgstr "Калi ласĐșĐ°, пДраĐčĐŽĐ·iцД ў %s ĐŽĐ»Ń Đ°ĐșтыĐČацыi Đ·ĐŒŃĐœĐ”ĐœĐœŃŃž"
-#: ../../partition_table.pm:1
+#: ../../my_gtk.pm:1
#, c-format
-msgid "mount failed: "
-msgstr "ĐżĐ°ĐŒŃ‹Đ»ĐșĐ° ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ: "
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr ""
-#: ../../pkgs.pm:1
-#, c-format
-msgid "maybe"
-msgstr "ĐŒĐŸĐ¶Đ° Đ±Ń‹Ń†ŃŒ"
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Lilo/grub mode"
+msgstr "Đ ŃĐ¶Ń‹ĐŒ Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ"
-#: ../../pkgs.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "nice"
-msgstr "ĐŽĐŸĐ±Ń€Đ°"
+msgid "Output"
+msgstr ""
-#: ../../pkgs.pm:1
+#: ../../loopback.pm:1
#, c-format
-msgid "very nice"
-msgstr "ĐČĐ”Đ»ŃŒĐŒi ĐŽĐŸĐ±Ń€Đ°"
+msgid "Circular mounts %s\n"
+msgstr "ĐœĐ°ĐœŃ†iраĐČĐ°ĐœĐœĐ” ЮысĐșу %s\n"
-#: ../../pkgs.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "important"
-msgstr "ĐČĐ°Đ¶ĐœĐ°"
+msgid "Martinique"
+msgstr ""
-#: ../../pkgs.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "must have"
-msgstr "паĐČiĐœĐœŃ‹ ĐŒĐ”Ń†ŃŒ"
+msgid "HardDrive / NFS"
+msgstr ""
-#: ../../raid.pm:1
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "ĐĐ”ĐŽĐ°ŃŃ‚Đ°Ń‚ĐșĐŸĐČĐ° разЎзДлаў ĐŽĐ»Ń RAID ŃƒĐ·Ń€ĐŸŃžĐœŃ %d\n"
+#: ../../modules/parameters.pm:1
+#, fuzzy, c-format
+msgid "a number"
+msgstr "ĐŃƒĐŒĐ°Ń€ Ń‚ŃĐ»Đ”Ń„ĐŸĐœŃƒ"
-#: ../../raid.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "mkraid failed"
-msgstr "mkraid ĐœĐ” ĐżŃ€Đ°Ń†Đ°Đ·ĐŽĐŸĐ»ŃŒĐœŃ‹"
+msgid "Swedish"
+msgstr "ĐšĐČДцĐși"
-#: ../../raid.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid ĐœĐ” ĐżŃ€Đ°Ń†Đ°Đ·ĐŽĐŸĐ»ŃŒĐœŃ‹ (ĐŒĐŸĐ¶Đ° raid прылаЎы Đ°ĐŽŃŃƒŃ‚Đœiчаюць?)"
+msgid "Which %s driver should I try?"
+msgstr "ĐŻĐși ЮраĐčĐČДр %s паспрабаĐČаць?"
-#: ../../raid.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "ĐĐ” Đ°Ń‚Ń€Ń‹ĐŒĐ»iĐČаДцца ЮаЮаць разЎзДл ĐœĐ° _Đ°ĐŽŃ„Đ°Ń€ĐŒĐ°Ń†iраĐČĐ°ĐœŃ‹_ RAID md%d"
-
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid "Stop"
-msgstr "ĐĄĐ”Đșтар"
-
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid "Start"
-msgstr "СтартаĐČĐ°Đ” ĐŒĐ”ĐœŃŽ"
+msgid ""
+"You will receive an alert if one of the selected services is no longer "
+"running"
+msgstr ""
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid "On boot"
-msgstr "Yaboot"
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Filesystem types:"
+msgstr "быпы фаĐčлаĐČых сiŃŃ‚ŃĐŒĐ°Ńž:"
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"No additional information\n"
-"about this service, sorry."
+msgid ", multi-function device on HP JetDirect"
msgstr ""
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Services and deamons"
+msgid "Northern Mariana Islands"
msgstr ""
-#: ../../services.pm:1
+#: ../../mouse.pm:1
+#, c-format
+msgid "none"
+msgstr "ĐœŃĐŒĐ°"
+
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "stopped"
-msgstr "Đ”Đ°Đ»ŃƒŃ‡Ń‹Ń†ŃŒ"
+msgid "user :"
+msgstr "IĐŒŃ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșу:"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "running"
-msgstr "ĐŁĐČага!"
+msgid "Please enter your password"
+msgstr "ĐŸĐ°ŃĐżŃ€Đ°Đ±ŃƒĐčцД яшчэ раз"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ”, яĐșiя сДрĐČiсы запусĐșаць Đ°ŃžŃ‚Đ°ĐŒĐ°Ń‚Ń‹Ń‡ĐœĐ° пры Đ·Đ°ĐłŃ€ŃƒĐ·Ń†Ń‹"
+msgid ""
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
+msgstr ""
-#: ../../services.pm:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "Database Server"
-msgstr "ХДрĐČДр ЮруĐșу"
+msgid "Floppy"
+msgstr "ЗахаĐČĐ°ĐœĐœĐ” ĐœĐ° ЮысĐșĐ”Ń‚Ńƒ"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Remote Administration"
-msgstr "Опцыi Đ°ĐŽĐŽĐ°Đ»Đ”ĐœĐ°ĐłĐ° ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ lpd"
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "ĐĐ°Ń†Ń–ŃĐœŃ–Ń†Đ” ĐœĐ° разЎзДл"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "File sharing"
+msgid "Ghostscript referencing"
msgstr ""
-#: ../../services.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Internet"
-msgstr "цiĐșĐ°ĐČĐ°"
+msgid "Bootloader"
+msgstr "Đ“Đ°Đ»ĐŸŃžĐœŃ‹Ń ĐŸĐżŃ†Ń‹i пачатĐșĐŸĐČага Đ·Đ°ĐłŃ€ŃƒĐ·Ń‡Ń‹Đșу"
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid "Printing"
-msgstr "ĐŸŃ€Ń‹ĐœŃ‚ŃŃ€"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Move"
+msgstr "ĐŸĐ”Ń€Đ°ĐœĐŸŃ"
-#: ../../services.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, fuzzy, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "ЗапусĐșĐ°Đ” i ĐżŃ€Ń‹ĐżŃ‹ĐœŃĐ” X Font Server пры Đ·Đ°ĐłŃ€ŃƒĐ·Ń†Ń‹ i ĐČыĐșĐ»ŃŽŃ‡ŃĐœĐœi."
-
-#: ../../services.pm:1
-#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr ""
+msgid "Bootloader to use"
+msgstr "Đ“Đ°Đ»ĐŸŃžĐœŃ‹Ń ĐŸĐżŃ†Ń‹i пачатĐșĐŸĐČага Đ·Đ°ĐłŃ€ŃƒĐ·Ń‡Ń‹Đșу"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
-msgstr ""
-"Syslog - гэта ŃŃ€ĐŸĐŽĐ°Đș, Đ· ĐŽĐ°ĐżĐ°ĐŒĐŸĐłĐ°Đč яĐșĐŸĐłĐ° ĐŒĐœĐŸĐłiя ĐŽŃĐŒĐ°ĐœŃ‹ Đ·Đ°ĐżiсĐČаюць "
-"паĐČĐ”ĐŽĐ°ĐŒĐ»Đ”ĐœĐœi\n"
-"ў Ń€ĐŸĐ·ĐœŃ‹Ń фаĐčлы статыстыĐși. Гэта ĐČĐ”Đ»ŃŒĐŒi ĐŽĐŸĐ±Ń€Đ° ĐŽĐ»Ń Đ°ĐłĐ»ŃĐŽŃƒ працы Ń€ĐŸĐ·ĐœŃ‹Ń… ŃĐ»ŃƒĐ¶Đ±Đ°Ńž."
+msgid "SMB server host"
+msgstr "IĐŒŃ сДрĐČĐ”Ń€Ńƒ SMB"
-#: ../../services.pm:1
-#, c-format
-msgid "Launch the sound system on your machine"
-msgstr ""
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Name Servers:"
+msgstr "NIS сДрĐČДр:"
-#: ../../services.pm:1
+#: ../../install_messages.pm:1
#, c-format
msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
msgstr ""
-"ПратаĐșĐŸĐ» rwho ĐŽĐ°Đ” ĐŒĐ°ĐłŃ‡Ń‹ĐŒĐ°ŃŃ†ŃŒ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°ĐŒ Đ°Ń‚Ń€Ń‹ĐŒĐ°Ń†ŃŒ спiс ўсiх\n"
-"ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșаў, уĐČĐ°ĐčŃˆĐŸŃžŃˆŃ‹Ń… ĐœĐ° ĐŒĐ°ŃˆŃ‹ĐœŃƒ, ĐČыĐșĐ°ĐœĐ°Ńž rwho ĐŽŃĐŒĐ°Đœ (ĐżĐ°ĐŽĐŸĐ±ĐœŃ‹ ĐœĐ° finger)."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
msgstr ""
-"ПратаĐșĐŸĐ» rusers ĐŽĐ°Đ·ĐČĐ°Đ»ŃĐ” ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°ĐŒ сДтĐși ĐČŃ‹Đ·ĐœĐ°Ń‡Đ°Ń†ŃŒ, Ń…Ń‚ĐŸ\n"
-"ўĐČĐ°ĐčŃˆĐŸŃž i ĐżŃ€Đ°Ń†ŃƒĐ” ĐœĐ° ĐŒĐ°ŃˆŃ‹ĐœĐ°Ń… ў сДтцы."
#: ../../services.pm:1
#, c-format
msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
msgstr ""
-"ПратаĐșĐŸĐ» rstat ĐŽĐ°Đ·ĐČĐ°Đ»ŃĐ” ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°ĐŒ сДтĐși Đ°Ń‚Ń€Ń‹ĐŒĐ»iĐČаць\n"
-"ĐżĐ°ĐŒĐ”Ń€Ń‹ ĐœĐ°ĐłŃ€ŃƒĐ·Đși ĐŽĐ»Ń ĐșĐŸĐ¶ĐœĐ°Đč ĐŒĐ°ŃˆŃ‹ĐœŃ‹ сДтĐși."
-#: ../../services.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Đ”ŃĐŒĐ°Đœ ĐŒĐ°Ń€ŃˆŃ€ŃƒŃ‚Ń‹Đ·Đ°Ń†Ń‹i ĐŽĐ°Đ·ĐČĐ°Đ»ŃĐ” ĐŽŃ‹ĐœĐ°ĐŒiŃ‡ĐœŃ‹ĐŒ таблiŃ†Đ°ĐŒ IP ĐŒĐ°Ń€ŃˆŃ€ŃƒŃ‚Ń‹Đ·Đ°Ń†Ń‹i\n"
-"Đ°ĐŽĐœĐ°ŃžĐ»ŃŃ†Ń†Đ° праз RIP пратаĐșĐŸĐ». RIP ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаДцца ў ĐŒĐ°Đ»Ń‹Ń… сДтĐșах, Đ±ĐŸĐ»ŃŒŃˆ\n"
-"сĐșĐ»Đ°ĐŽĐ°ĐœŃ‹Ń пратаĐșĐŸĐ»Ń‹ ĐŒĐ°Ń€ŃˆŃ€ŃƒŃ‚Ń‹Đ·Đ°Ń†Ń‹i - у ĐČŃĐ»iĐșiх сДтĐșах."
+msgid "4 billion colors (32 bits)"
+msgstr "4 ĐŒiĐ»iярЮа ĐșĐŸĐ»Đ”Ń€Đ°Ńž (24 бiты)"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
+msgid "Micronesia"
msgstr ""
-#: ../../services.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"ЗахаĐČаць i Đ°ĐŽĐœĐ°ĐČiць сiŃŃ‚ŃĐŒĐœŃ‹ ŃĐœŃ‚Ń€Đ°ĐżiĐčĐœŃ‹ пул ĐŽĐ»Ń ĐČŃ‹ŃĐŸĐșĐ°Đč яĐșасцi\n"
-"ĐłĐ”ĐœĐ”Ń€Đ°Ń†Ń‹Ń– ĐČыпаЮĐșĐŸĐČых ліĐșаў."
-
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
+msgid "License"
msgstr ""
-"Postfix - гэта ĐżĐ°ŃˆŃ‚ĐŸĐČы Ń‚Ń€Đ°ĐœŃĐżĐ°Ń€Ń‚ĐœŃ‹ Đ°ĐłĐ”ĐœŃ‚, ĐżŃ€Đ°ĐłŃ€Đ°ĐŒĐ°, яĐșая\n"
-"ĐżĐ”Ń€Đ°ĐŒŃŃˆŃ‡Đ°Đ” ĐżĐŸŃˆŃ‚Ńƒ Đ· Đ°ĐŽĐœĐŸĐč ĐŒĐ°ŃˆŃ‹ĐœŃ‹ ĐœĐ° ĐčĐœŃˆŃƒŃŽ."
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
+msgid "This may take a moment to generate the keys."
msgstr ""
-"Portmapper (Đ°ĐłĐ»ŃĐŽĐ°Đ»ŃŒĐœiĐș ĐżĐ°Ń€Ń‚ĐŸŃž) ĐșiŃ€ŃƒĐ” RPC Đ·Đ»ŃƒŃ‡ŃĐœĐœŃĐŒi, яĐșiя Đ·ĐČычаĐčĐœĐ°\n"
-"ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаюцца таĐșiĐŒi пратаĐșĐŸĐ»Đ°ĐŒi яĐș NFS i NIS. Portmap сДрĐČДр паĐČiĐœĐ”Đœ "
-"ĐČыĐșĐŸĐœĐČацца\n"
-"ĐœĐ° ĐŒĐ°ŃˆŃ‹ĐœĐ°Ń… яĐșiя працуюць яĐș сДрĐČДры ĐŽĐ»Ń пратаĐșĐŸĐ»Đ°Ńž, яĐșiя сĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаюць RPC."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
msgstr ""
-"ĐŸĐ°ĐŽŃ‚Ń€Ń‹ĐŒĐșĐ° PCMCIA - гэта Đ·ĐČычаĐčĐœĐ° ĐżĐ°ĐŽŃ‚Ń€Ń‹ĐŒĐșĐ° таĐșiх рэчаў, яĐș Ethernet i\n"
-"ĐŒĐ°ĐŽŃĐŒŃ‹ ў ĐœĐ°ŃžŃ‚Đ±ŃƒĐșах. Đ’Đ°ĐŒ ĐœŃĐŒĐ° ĐœĐ”Đ°Đ±Ń…ĐŸĐŽĐœĐ°ŃŃ†i ĐșĐ°ĐœŃ„iгураĐČаць iх, ĐșĐ°Đ»i ĐœĐ° ĐČашаĐč\n"
-"ĐŒĐ°ŃˆŃ‹ĐœĐ” iх ĐœŃĐŒĐ°, цi ŃĐœĐ° ĐœĐ” ĐœĐ°ŃžŃ‚Đ±ŃƒĐș."
-#: ../../services.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
+msgid "Sagem (using pppoa) usb"
msgstr ""
-#: ../../services.pm:1
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
+"ĐŸĐ°ĐŒŃ‹Đ»ĐșĐ°: ĐŽĐ»Ń стĐČĐ°Ń€ŃĐœĐœŃ ĐœĐŸĐČых фаĐčлаĐČых сiŃŃ‚ŃĐŒĐ°Ńž ĐœĐ” Đ·ĐœĐ°ĐčĐŽĐ·Đ”ĐœŃ‹ аЎпаĐČĐ”ĐŽĐœŃ‹Ń \n"
+"прылаЎы. ПраĐČДрцД Đ°Đ±ŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” ĐŽĐ»Ń ĐżĐŸŃˆŃƒĐșу iĐŒĐ°ĐČĐ”Ń€ĐœĐ°Đč ĐżŃ€Ń‹Ń‡Ń‹ĐœŃ‹."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Starting the printing system at boot time"
+msgstr "ĐŻĐșую сiŃŃ‚ŃĐŒŃƒ ЮруĐșу Вы жаЎаДцД ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць?"
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS - гэта ĐČŃĐŽĐŸĐŒŃ‹ пратаĐșĐŸĐ» ĐŽĐ»Ń ĐŽĐŸŃŃ‚ŃƒĐżŃƒ ĐŽĐ° фаĐčлаў праз TCP/IP\n"
-"сДтĐși. Гэтая служба ўплыĐČĐ°Đ” ĐœĐ° ĐœĐ°ŃŃžĐœĐ°ŃŃ†ŃŒ суĐČŃĐ·i ĐżĐ°ĐŒiж NFS фаĐčĐ»Đ°ĐŒi."
+msgid "Do you want to start the connection at boot?"
+msgstr "Вы жаЎаДцД, Đșаб ĐłŃŃ‚Đ°Đ” Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ” стартаĐČала пры Đ·Đ°ĐłŃ€ŃƒĐ·Ń†Ń‹?"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
+msgid "Processor ID"
msgstr ""
-"NFS - гэта ĐČŃĐŽĐŸĐŒŃ‹ пратаĐșĐŸĐ» ĐŽĐ»Ń ĐŽĐŸŃŃ‚ŃƒĐżŃƒ ĐŽĐ° фаĐčлаў праз TCP/IP сДтĐși.\n"
-"Гэтая служба Đ·Đ°Đ±ŃŃĐżĐ”Ń‡ĐČаДцца NFS сДрĐČĐ”Ń€Đ°ĐŒ, яĐși ĐșĐ°ĐœŃ„iĐłŃƒŃ€Ń‹Ń€ŃƒĐ”Ń†Đ° праз\n"
-"/etc/exports фаĐčĐ»."
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
+msgid "Sound trouble shooting"
msgstr ""
-"АĐșтыĐČiĐ·Đ°ĐČаць/ЮэаĐșтыĐČiĐ·Đ°ĐČаць усД сДтĐșĐ°ĐČыя iĐœŃ‚ŃŃ€Ń„Đ”Đčсы, сĐșĐ°ĐœŃ„iгураĐČĐ°ĐœŃ‹Ń ĐŽĐ»Ń\n"
-"старту пры Đ·Đ°ĐłŃ€ŃƒĐ·Ń†Ń‹ сiŃŃ‚ŃĐŒŃ‹."
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"ĐœĐ°ĐœŃ†iраĐČаць i Ń€Đ°Đ·ĐŒĐ°ĐœŃ†iраĐČаць усД сДтĐșĐ°ĐČыя фаĐčлаĐČыя сiŃŃ‚ŃĐŒŃ‹ (NFS),\n"
-" SMB (Lan Manager/Windows) i NCP (Netware) ĐżŃƒĐœĐșты ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ."
+msgid "Polish (qwerty layout)"
+msgstr "ĐŸĐŸĐ»ŃŒŃĐși (ŃŃ‚Đ°ĐœĐŽĐ°Ń€Ń‚ĐœĐ°Ń расĐșлаЎĐșĐ°)"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) - гэта сДрĐČДр ĐŽĐ°ĐŒĐ”ĐœĐœŃ‹Ń… iĐŒŃ‘ĐœĐ°Ńž, яĐși ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаДцца ĐŽĐ»Ń\n"
-"пДраĐșĐ»Đ°ĐŽĐ°ĐœĐœŃ iĐŒŃ‘Đœ ĐČŃƒĐ·Đ»ĐŸŃž у IP аЮрасы."
+msgid "activate now"
+msgstr "АĐșŃ‚Ń‹ŃžĐœŃ‹"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
+"\n"
+"Drakbackup activities via CD:\n"
+"\n"
msgstr ""
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
msgstr ""
-"lpd - гэты ĐŽŃĐŒĐ°Đœ ЮруĐșу, ĐżĐ°Ń‚Ń€ŃĐ±ĐœŃ‹ ĐŽĐ»Ń ĐșарэĐșŃ‚ĐœĐ°Đč працы lpr. Гэта\n"
-"сДрĐČДр, яĐși ĐșiŃ€ŃƒĐ” працаĐč ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ(аў)."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
+msgid "Host \"%s\", port %s"
msgstr ""
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
+msgid "This partition can't be used for loopback"
+msgstr "Гэты разЎзДл ĐœĐ” ĐŒĐŸĐ¶Đ° Đ±Ń‹Ń†ŃŒ ĐČыĐșĐ°Ń€Ń‹ŃŃ‚Đ°ĐœŃ‹ паЎ ĐČiŃ€Ń‚ŃƒĐ°Đ»ŃŒĐœŃƒŃŽ фаĐčлаĐČую сiŃŃ‚ŃĐŒŃƒ"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
+msgid "File already exists. Use it?"
+msgstr "ЀаĐčĐ» ŃƒĐ¶ĐŸ iŃĐœŃƒĐ”. ВыĐșарыстаць ŃĐłĐŸ?"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
+msgid "received: "
msgstr ""
-"Гэты паĐșДт Đ·Đ°ĐłŃ€ŃƒĐ¶Đ°Đ” Đ°Đ±Ń€Đ°ĐœŃƒŃŽ расĐșлаЎĐșу ĐșлаĐČiятуры яĐș ĐœĐ°Đ±ĐŸŃ€ Đ·\n"
-"/etc/sysconfig/keyboard. ĐĐœĐ° ĐŒĐŸĐ¶Đ° Đ±Ń‹Ń†ŃŒ Đ°Đ±Ń€Đ°ĐœĐ° таĐșŃĐ°ĐŒĐ° Đ· ĐŽĐ°ĐżĐ°ĐŒĐŸĐłĐ°Đč "
-"kbdconfig.\n"
-"Вы ĐŒĐŸĐ¶Đ°Ń†Đ” зрабiць ĐŽĐ°ŃŃ‚ŃƒĐżĐœĐ°Đč ŃĐ” ĐŽĐ»Ń ŃˆĐŒĐ°Ń‚Đ»Ń–Đșіх ĐŒĐ°ŃˆŃ‹ĐœĐ°Ńž."
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
+msgid "Right Alt key"
msgstr ""
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
+msgid "the list of alternative drivers for this sound card"
msgstr ""
-"IĐœŃ‚ŃŃ€ĐœŃŃ‚ ŃŃƒĐżĐ”Ń€ŃĐ”Ń€ĐČДр-ĐŽŃĐŒĐ°Đœ (Đ·Đ°ĐČДцца inetd) запусĐșĐ°Đ” пры старцД \n"
-"ĐșĐŸĐ»ŃŒĐșасць Ń€ĐŸĐ·ĐœŃ‹Ń… iĐœŃ‚ŃŃ€ĐœŃŃ‚ ŃĐ»ŃƒĐ¶Đ±Đ°Ńž, яĐșiя ĐœĐ”Đ°Đ±Ń…ĐŸĐŽĐœŃ‹. ĐŻĐłĐŸ ĐŒĐŸĐ¶ĐœĐ° ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць "
-"ĐŽĐ»Ń пусĐșу\n"
-"ŃˆĐŒĐ°Ń‚Đ»Ń–Đșіх ŃĐ»ŃƒĐ¶Đ±Đ°Ńž, уĐșлючаючы telnet, ftp, rsh i rlogin. БлаĐșуючы inetd, "
-"блаĐșŃƒĐ”ĐŒ\n"
-"усД ŃĐ»ŃƒĐ¶Đ±Ń‹, Đ·Đ° яĐșiя Ń‘Đœ Đ°ĐŽĐșĐ°Đ·ĐČĐ°Đ”."
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache - гэта World Wide Web сДрĐČДр. ĐĐœ ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐ·ĐČаДца ĐŽĐ»Ń Đ°Đ±ŃĐ»ŃƒĐłĐŸŃžĐČĐ°ĐœĐœŃ\n"
-"HTML фаĐčлаў i CGI."
+msgid "Gateway"
+msgstr "Клюз"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scanner sharing"
+msgstr "ĐŸŃ€Ń‹ĐœŃ‚ŃŃ€"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
+msgid "Tonga"
msgstr ""
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
+msgid "Tunisia"
msgstr ""
-"GPM ĐŽĐ°ĐŽĐ°Đ” ĐżĐ°ĐŽŃ‚Ń€Ń‹ĐŒĐșу ĐŒŃ‹ŃˆŃ‹ ĐŽĐ° ĐżŃ€Đ°ĐłŃ€Đ°ĐŒĐ°Ńž, яĐșiя працуюць у тэĐșстаĐČŃ‹ĐŒ Ń€ŃĐ¶Ń‹ĐŒĐ”,\n"
-"таĐșiх яĐș Midnight Commander. Гэта ĐŽĐ°Đ·ĐČĐ°Đ»ŃĐ” ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць ĐŒŃ‹Ńˆ пры "
-"ĐșĐ°ĐżiраĐČĐ°ĐœĐœi i ўстаўцы,\n"
-"i ўĐșлючаД ĐżĐ°ĐŽŃ‚Ń€Ń‹ĐŒĐșу ўсплыĐČаючых (pop-up) ĐŒĐ”ĐœŃŽ ў тэĐșстаĐČŃ‹ĐŒ Ń€ŃĐ¶Ń‹ĐŒĐ”."
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Profile: "
+msgstr "ĐżĐ°ĐŒŃ‹Đ»ĐșĐ° ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ: "
+
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
+"Click on a device in the left tree in order to display its information here."
msgstr ""
-"cron - ŃŃ‚Đ°ĐœĐŽĐ°Ń€Ń‚ĐœĐ°Ń UNIX ĐżŃ€Đ°ĐłŃ€Đ°ĐŒĐ°, яĐșая ĐČыĐșĐŸĐœĐČĐ°Đ” ĐżŃ€Đ°ĐłŃ€Đ°ĐŒŃ‹ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°\n"
-"праз ĐżĐ°Đ·ĐœĐ°Ń‡Đ°ĐœŃ‹Ń ĐżĐ”Ń€Ń‹ŃĐŽŃ‹ часу. Vixie cron ĐŽĐ°ĐŽĐ°Đ” раЮ ĐŽĐ°ĐżĐ°ŃžĐœĐ”ĐœĐœŃŃž ĐŽĐ° "
-"ŃŃ‚Đ°ĐœĐŽĐ°Ń€Ń‚ĐœĐ°ĐłĐ°\n"
-"UNIX cron, уĐșлючаючы Đ»Đ”ĐżŃˆŃ‹ ŃžĐ·Ń€ĐŸĐČĐ”ĐœŃŒ Đ±ŃŃĐżĐ”Đși i ĐŒĐŸŃ†ĐœŃ‹Ń ĐșĐ°ĐœŃ„iгурацыĐčĐœŃ‹Ń ĐŸĐżŃ†Ń‹i."
-#: ../../services.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
+msgid "XawTV isn't installed!"
msgstr ""
-"ĐšĐ°ĐŒĐ°ĐœĐŽŃ‹, яĐșiя ĐČыĐșĐŸĐœĐČаюцца, фiĐșсуюцца па ĐșĐ°ĐŒĐ°ĐœĐŽĐ·Đ” i часД ŃĐ” ĐČыĐșĐ°ĐœĐ°ĐœĐœŃ\n"
-"i ĐČыĐșĐŸĐœĐČаюцца групы ĐșĐ°ĐŒĐ°ĐœĐŽ, ĐșĐ°Đ»i Đ·Đ°ĐłŃ€ŃƒĐ·ĐșĐ° ĐżĐ°ĐŒŃŃ†i ĐœiĐ¶ŃĐč ЮастатĐșĐŸĐČĐ°Đč."
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"Create/Transfer\n"
+"backup keys for SSH"
msgstr ""
-"ampd ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаДцца ĐŽĐ»Ń аЎслДжĐČĐ°ĐœĐœŃ статусу Đ±Đ°Ń‚Đ°Ń€Ńi i ĐČŃĐŽĐ·Đ”ĐœĐœŃ "
-"статыстыĐși.\n"
-"ĐŻĐłĐŸ ĐŒĐŸĐ¶ĐœĐ° ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць ĐŽĐ»Ń ĐČыĐșĐ»ŃŽŃ‡ŃĐœĐœŃ ĐŒĐ°ŃˆŃ‹ĐœŃ‹ пры ĐœiĐ·ĐșiĐŒ зараЎзД Đ±Đ°Ń‚Đ°Ń€Ńi."
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron, ĐżĐ”Ń€Ń‹ŃĐŽŃ‹Ń‡ĐœŃ‹ ĐșĐ°ĐŒĐ°ĐœĐŽĐœŃ‹ ĐżĐ»Đ°ĐœĐ°ĐČĐ°Đ»ŃŒĐœiĐș."
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr ""
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgid "old static device name used in dev package"
msgstr ""
-#: ../../standalone.pm:1
-#, fuzzy, c-format
-msgid "Installing packages..."
-msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” паĐșĐ”Ń‚Ńƒ %s"
+#: ../../any.pm:1
+#, c-format
+msgid "This label is already used"
+msgstr "Гэтая ĐŒĐ”Ń‚ĐșĐ° ŃžĐ¶ĐŸ ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаДцца"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
-#: ../../standalone.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
-msgstr ""
+msgid "After formatting partition %s, all data on this partition will be lost"
+msgstr "УсД ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Đ” ў разЎзДлД %s Đ±ŃƒĐŽŃƒŃ†ŃŒ ŃŃ‚Ń€Đ°Ń‡Đ°ĐœŃ‹ ĐżĐ°ŃĐ»Ń Ń„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœŃ"
-#: ../../standalone.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connection Time: "
+msgstr "IĐŒŃ Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ"
+
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+msgid "select perm file to see/edit"
msgstr ""
-#: ../../standalone.pm:1
-#, c-format
+#: ../../standalone/livedrake:1
+#, fuzzy, c-format
msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
+"Đ—ĐŒŃĐœiцД ĐČаш Cd-Rom!\n"
+"\n"
+"Калi ласĐșĐ°, ŃƒŃŃ‚Đ°ŃžŃ†Đ” Cd-Rom, ĐżĐ°Đ·ĐœĐ°Ń‡Đ°ĐœŃ‹ \"%s\", у ĐČаш ЮысĐșĐ°ĐČĐŸĐŽ i ĐœĐ°Ń†iŃĐœiцД OĐș "
+"ĐżĐ°ŃĐ»Ń.\n"
+"Калi ĐČы ĐœĐ” ĐŒĐ°Đ”Ń†Đ” ŃĐłĐŸ, ĐœĐ°Ń†iŃĐœiцД ĐĐŽĐŒŃĐœiць, Đșаб Đ°ĐŽĐŒŃĐœiць ŃƒŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” Đ· гэтага "
+"Cd."
-#: ../../standalone.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "Use group id for execution"
msgstr ""
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
-msgstr ""
+msgid "Choose the default user:"
+msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” Đ°ŃĐœĐŸŃžĐœĐ°ĐłĐ° ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°:"
-#: ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgid "Gabon"
msgstr ""
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "[keyboard]"
-msgstr "КлаĐČiятура"
-
-#: ../../standalone.pm:1
-#, c-format
msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
+"\n"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
msgstr ""
+"ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ CUPS сДрĐČДр ĐœĐ” ĐżĐ°Ń‚Ń€Đ°Đ±ŃƒĐ” Đ°ĐŽ Вас ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐșі ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ\n"
+"ĐœĐ° гэтаĐč ĐŒĐ°ŃˆŃ‹ĐœĐ”, Ń‘Đœ буЎзД Đ·ĐœĐŸĐčĐŽĐ·Đ”ĐœŃ‹ Đ°ŃžŃ‚Đ°ĐŒĐ°Ń‚Ń‹Ń‡ĐœĐ°.\n"
+"Калі Вы ĐœĐ” ŃžĐżŃŃžĐœĐ”ĐœŃ‹, Đ°Đ±ŃŃ€Ń‹Ń†Đ” \"ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ сДрĐČДр CUPS\"."
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
-msgstr ""
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
+msgstr "Вы ĐŒĐŸĐ¶Đ°Ń†Đ” Đ°Đ±Ń€Đ°Ń†ŃŒ Ń–ĐœŃˆŃ‹Ń ĐŒĐŸĐČы, яĐșiя Đ±ŃƒĐŽŃƒŃ†ŃŒ ĐŽĐ°ŃŃ‚ŃƒĐżĐœŃ‹ ĐżĐ°ŃĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
-#: ../../standalone.pm:1
-#, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
-msgstr ""
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Domain"
+msgstr "NIS Domain"
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default : save default directories.\n"
-"--debug : show all debug messages.\n"
-"--show-conf : list of files or directories to backup.\n"
-"--config-info : explain configuration file options (for non-X "
-"users).\n"
-"--daemon : use daemon configuration. \n"
-"--help : show this message.\n"
-"--version : show version number.\n"
-msgstr ""
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "ĐŸĐ°Đ·ĐœĐ°Ń‡Ń†Đ” ĐŽĐ°ĐșĐ»Đ°ĐŽĐœŃ‹ ĐżĐ°ĐŒĐ”Ń€ RAM (Đ·ĐœĐŸĐčĐŽĐ·Đ”ĐœĐ° %d Mб)"
-#: ../../standalone.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
msgstr ""
-#: ../../steps.pm:1
-#, c-format
-msgid "Exit install"
-msgstr "ЗаĐșĐ°ĐœŃ‡ŃĐœĐœĐ” ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
-
-#: ../../steps.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Install updates"
-msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” сiŃŃ‚ŃĐŒŃ‹"
+msgid "Provider dns 2 (optional)"
+msgstr "DNS 2 праĐČĐ°ĐčЮару"
-#: ../../steps.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Configure services"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ŃĐ»ŃƒĐ¶Đ±Đ°Ńž"
+msgid "Boot device"
+msgstr "Đ—Đ°ĐłŃ€ŃƒĐ·Đ°Ń‡ĐœĐ°Ń прылаЎа"
-#: ../../steps.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Configure X"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° X Window"
+msgid "Which partition do you want to resize?"
+msgstr "ĐŸĐ°ĐŒĐ”Ń€Ń‹ яĐșĐŸĐłĐ° разЎзДла ĐČы жаЎаДцД Đ·ĐŒŃĐœiць?"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Install bootloader"
-msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” Đ·Đ°ĐłŃ€ŃƒĐ·Ń‡Ń‹Đșу"
+msgid "United States Minor Outlying Islands"
+msgstr ""
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Configure networking"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° сДтĐși"
+msgid "A tool to monitor your logs"
+msgstr ""
-#: ../../steps.pm:1
-#, c-format
-msgid "Add a user"
-msgstr "ДаЮаць ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Djibouti"
+msgstr "ĐĐŽĐŒŃĐœiць"
-#: ../../steps.pm:1
-#, c-format
-msgid "Root password"
-msgstr "ĐŸĐ°Ń€ĐŸĐ»ŃŒ ĐŽĐ»Ń root"
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "detected on port %s"
+msgstr "Đ”ŃƒĐ±Đ»ŃĐČĐ°ĐœĐœĐ” ĐżŃƒĐœĐșту ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ %s"
-#: ../../steps.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Install system"
-msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” сiŃŃ‚ŃĐŒŃ‹"
+msgid "LPD"
+msgstr ""
-#: ../../steps.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Choose packages to install"
-msgstr "Выбар паĐșДтаў"
+msgid "Graphics card: %s\n"
+msgstr "ВiЮэаĐșарта: %s\n"
-#: ../../steps.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Format partitions"
-msgstr "Đ€Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœĐ” разЎзДлаў"
+msgid "Yaboot"
+msgstr "Yaboot"
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Partitioning"
-msgstr "ĐŸŃ€Ń‹ĐœŃ‚ŃŃ€"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Choose your keyboard"
-msgstr "Выбар ĐșлаĐČiятуры"
+msgid "Please check if you are using a DVDRAM device"
+msgstr "ĐĐ°Ń†Ń–ŃĐœŃ–Ń†Đ” ĐœĐ° разЎзДл"
-#: ../../steps.pm:1
-#, c-format
-msgid "Select installation class"
-msgstr "Клас ŃƒŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Splash selection"
+msgstr "Асабiсты ĐČыбар паĐșДтаў"
-#: ../../steps.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Hard drive detection"
-msgstr "Đ’Ń‹Đ·ĐœĐ°Ń‡ŃĐœĐœĐ” Đ¶ĐŸŃ€ŃŃ‚Đșага ЮысĐșу"
+msgid "Extended partition not supported on this platform"
+msgstr "ĐŸĐ°ŃˆŃ‹Ń€Đ°ĐœŃ‹ разЎзДл ĐœĐ” ĐżĐ°ĐŽŃ‚Ń€Ń‹ĐŒĐ»iĐČаДцца гэтаĐč ĐżĐ»Đ°Ń‚Ń„ĐŸŃ€ĐŒĐ°Đč"
-#: ../../steps.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Configure mouse"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ĐŒŃ‹ŃˆŃ‹"
+msgid "ISDN Configuration"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ISDN"
-#: ../../steps.pm:1
-#, c-format
-msgid "License"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "high"
+msgstr "Đ’Ń‹ŃĐŸĐși"
-#: ../../steps.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Language"
-msgstr "Выбар ĐŒĐŸĐČы"
+msgid "Internet Connection Sharing"
+msgstr "ĐĄŃƒĐŒĐ”ŃĐœĐ°Đ” IĐœŃ‚ŃŃ€ĐœŃŃ‚-Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ”"
-#: ../../ugtk2.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "utopia 25"
+msgid "Choose file"
msgstr ""
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "OK"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
msgstr ""
+"ĐŁĐČага! Đ—ĐœĐŸĐčĐŽĐ·Đ”ĐœĐ° Ń–ŃĐœŃƒŃŽŃ‡Đ°Ń сiŃŃ‚ŃĐŒĐ° сДтĐșĐ°ĐČĐ°Đč Đ±ŃŃĐżĐ”Đși (firewall). Đ’Đ°ĐŒ ĐŒĐ°ĐłŃ‡Ń‹ĐŒĐ° "
+"ŃĐżĐ°Ń‚Ń€ŃĐ±Ń–Ń†Ń†Đ° сĐșарэĐșтаĐČаць ŃĐ” ĐżĐ°ŃĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ."
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
-#, c-format
-msgid "logdrake"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "ĐĐŽĐ»ŃƒŃ‡ŃĐœĐœĐ” Đ°ĐŽ сДтĐși"
-#: ../../ugtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgid ""
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer default settings"
+msgstr "Đ—Đ»ŃƒŃ‡ŃĐœĐœĐ” ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
+
+#: ../../mouse.pm:1
+#, fuzzy, c-format
+msgid "Generic PS2 Wheel Mouse"
+msgstr "ЗĐČычаĐčĐœĐ°Ń ĐŒŃ‹Ńˆ Đ· 2 ĐșĐœĐŸĐżĐșĐ°ĐŒŃ–"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Removing old printer \"%s\"..."
+msgstr "Чытаю базу ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń… ЮраĐčĐČĐ”Ń€ĐŸŃž CUPS"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Select a device !"
+msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” ĐČiЮэаĐșарту"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove selected server"
+msgstr "Đ’Ń‹ĐŽĐ°Đ»iць чаргу ЮруĐșу"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Xpmac (installation display driver)"
+msgid "French Southern Territories"
msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+msgid "the vendor name of the processor"
msgstr ""
-"Ваша ĐČiЮэаĐșарта ĐŒĐŸĐ¶Đ° ĐŒĐ”Ń†ŃŒ 3D-пасĐșĐ°Ń€ŃĐœĐœĐ”, яĐșĐŸĐ” ĐżĐ°ĐŽŃ‚Ń€Ń‹ĐŒĐ»iĐČаДцца Ń‚ĐŸĐ»ŃŒĐși XFree %"
-"s.\n"
-"МАЙЩЕ НА ЎВАЗЕ, йбО ГЭбА Đ­ĐšĐĄĐŸĐ•Đ Đ«ĐœĐ•ĐĐąĐĐ›ĐŹĐĐĐŻ ĐŸĐĐ”ĐąĐ Đ«ĐœĐšĐ I МОЖА ĐŸĐ Đ«Đ’Đ•ĐĄĐŠI ДА\n"
-"ЗАВIСАННЯ ВАйАГА КАМП'мбЭРУ."
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s Đ· эĐșŃĐżĐ”Ń€Ń‹ĐŒĐ”ĐœŃ‚Đ°Đ»ŃŒĐœĐ°Đč ĐżĐ°ĐŽŃ‚Ń€Ń‹ĐŒĐșĐ°Đč 3D-пасĐșĐ°Ń€ŃĐœĐœŃ"
+msgid "All data on this partition should be backed-up"
+msgstr "УсД ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń ў ĐłŃŃ‚Ń‹ĐŒ разЎзДлД паĐČiĐœĐœŃ‹ Đ±Ń‹Ń†ŃŒ зархiĐČĐ°ĐČĐ°ĐœŃ‹Ń"
-#: ../../Xconfig/card.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"Ваша ĐČiЮэаĐșарта ĐŒĐŸĐ¶Đ° ĐŒĐ”Ń†ŃŒ 3D-пасĐșĐ°Ń€ŃĐœĐœĐ”, яĐșĐŸĐ” ĐżĐ°ĐŽŃ‚Ń€Ń‹ĐŒĐ»iĐČаДцца Ń‚ĐŸĐ»ŃŒĐși XFree %"
-"s."
+msgid "Installing package %s"
+msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” паĐșĐ”Ń‚Ńƒ %s"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s Đ· ĐżĐ°ĐŽŃ‚Ń€Ń‹ĐŒĐșĐ°Đč 3D-пасĐșĐ°Ń€ŃĐœĐœŃ"
+msgid "Checking device and configuring HPOJ..."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
msgstr ""
-"Ваша ĐČiЮэаĐșарта ĐŒĐŸĐ¶Đ° ĐŒĐ”Ń†ŃŒ 3D-пасĐșĐ°Ń€ŃĐœĐœĐ”, яĐșĐŸĐ” ĐżĐ°ĐŽŃ‚Ń€Ń‹ĐŒĐ»iĐČаДцца Ń‚ĐŸĐ»ŃŒĐși XFree %"
-"s.\n"
-"МАЙЩЕ НА ЎВАЗЕ, йбО ГЭбА Đ­ĐšĐĄĐŸĐ•Đ Đ«ĐœĐ•ĐĐąĐĐ›ĐŹĐĐĐŻ ĐŸĐĐ”ĐąĐ Đ«ĐœĐšĐ I МОЖА ĐŸĐ Đ«Đ’Đ•ĐĄĐŠI ДА\n"
-"ЗАВIСАННЯ ВАйАГА КАМП'ПйЭРУ. Ваша ĐČiЮэаĐșарта ĐżĐ°ĐŽŃ‚Ń€Ń‹ĐŒĐ»iĐČаДцца XFree %s, яĐși\n"
-"лДпДĐč ĐżĐ°ĐŽŃ‚Ń€Ń‹ĐŒĐ»iĐČĐ°Đ” Đșарты Đ· 2D-пасĐșĐ°Ń€ŃĐœĐœĐ”ĐŒ."
+"Каб зрабiць Đ±ĐŸĐ»ŃŒŃˆ разЎДлаў, ĐČŃ‹ĐŽĐ°Đ»iцД Đ°ĐŽĐ·iĐœ i стĐČарыцД ĐżĐ°ŃˆŃ‹Ń€Đ°ĐœŃ‹ разЎзДл "
+"(extended)"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
msgstr ""
-"ĐŸĐ°ĐŽŃ‚Ń€Ń‹ĐŒĐșĐ° 3D-пасĐșĐ°Ń€ŃĐœĐœŃ ў ВашаĐč ĐČіЮэаĐșарцД ĐČыĐșĐ°ĐœĐ°ĐœĐ° Ń‚ĐŸĐ»ŃŒĐșі ў XFree %s.\n"
-"XFree %s ĐŒĐŸĐ¶Đ° ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць Ń‚ĐŸĐ»ŃŒĐșі 2D-пасĐșĐ°Ń€ŃĐœĐœĐ” ĐŽĐ»Ń гэтаĐč ĐČіЮэаĐșарты."
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "XFree %s"
-msgstr "ХДрĐČДр XFree86 %s"
-
-#: ../../Xconfig/card.pm:1
-#, fuzzy, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "ĐšĐ°ĐœŃ„iгураĐČаць ĐŒĐ°ŃŽ Đșарту"
+msgid "Choose packages to install"
+msgstr "Выбар паĐșДтаў"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use Xinerama extension"
+msgid ""
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Configure all heads independently"
-msgstr ""
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr "УсД iŃĐœŃƒŃŽŃ‡Ń‹Ń разЎзДлы ĐœĐ° ЮысĐșу %s i ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń ĐœĐ° iх Đ±ŃƒĐŽŃƒŃ†ŃŒ ŃŃ‚Ń€Đ°Ń‡Đ°ĐœŃ‹"
-#: ../../Xconfig/card.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "ĐŻĐșую ĐșĐ°ĐœŃ„iгурацыю XFree ĐČы жаЎаДцД Đ°Ń‚Ń€Ń‹ĐŒĐ°Ń†ŃŒ?"
+msgid ""
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
+msgstr ""
+"Ваша сiŃŃ‚ŃĐŒĐ° ĐœĐ” ĐŒĐ°Đ” ЮастаĐșĐŸĐČĐ° ĐŒĐ”ŃŃ†Đ° ĐŽĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ цi Đ°Đ±ĐœĐ°ŃžĐ»Đ”ĐœĐœŃ (%d > %d)"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "XFree configuration"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° XFree"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "ĐŸĐ°Đ·ĐœĐ°Ń‡Ń†Đ” ĐżĐ°ĐŒĐ”Ń€ ĐČiĐŽŃĐ°ĐżĐ°ĐŒŃŃ†i"
+msgid ""
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+msgid "Bhutan"
msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Network interface"
+msgstr "ХДтĐșĐ°ĐČы iĐœŃ‚ŃŃ€Ń„Đ”Đčс"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Multi-head configuration"
-msgstr "Ń‡Ń‹Ń‚Đ°ĐœĐœĐ” ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐși"
+msgid "Reading printer data..."
+msgstr "Чытаю базу ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń… ЮраĐčĐČĐ”Ń€ĐŸŃž CUPS"
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Choose an X server"
-msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” X сДрĐČДр"
+msgid "Korean keyboard"
+msgstr "UK ĐșлаĐČiятура"
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "X server"
-msgstr "X сДрĐČДр"
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Not connected"
+msgstr "Đ Đ°Đ·ĐŒĐ”Ń€ĐșĐ°ĐČĐ°ĐœĐœĐ”"
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "64 MB or more"
-msgstr "64 ĐœĐ± цi Đ±ĐŸĐ»Đ”Đč"
+msgid "Greek"
+msgstr "ГрэчасĐși"
-#: ../../Xconfig/card.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "32 MB"
-msgstr "32 ĐœĐ±"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "16 MB"
-msgstr "16 ĐœĐ±"
+msgid "Saint Kitts and Nevis"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "8 MB"
-msgstr "8 ĐœĐ±"
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "4 MB"
-msgstr "4 ĐœĐ±"
+msgid "Enable OF Boot?"
+msgstr ""
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "2 MB"
-msgstr "2 ĐœĐ±"
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "Вы ĐœĐ” ĐŒĐŸĐ¶Đ°Ń†Đ” разбiĐČаць ĐœĐ° разЎДлы, ĐżĐ°ĐŒĐ”Ń€ яĐșiх ĐŒĐ”ĐœĐ”Đč Đ·Đ° 16 ĐœĐ±"
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "1 MB"
-msgstr "1 ĐœĐ±"
+msgid "Monitor VertRefresh: %s\n"
+msgstr "Đ§Đ°ŃŃ†Ń–ĐœŃ ĐČДрт.разг. ĐŒĐ°ĐœiŃ‚ĐŸŃ€Ńƒ: %s\n"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "512 kB"
-msgstr "512 Кб"
+msgid "path"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "256 kB"
-msgstr "256 Кб"
+msgid "Mount point"
+msgstr "ĐšŃ€ĐŸĐżĐșĐ° ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ"
-#: ../../Xconfig/main.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
msgstr ""
-"Щі жаЎаДцД Вы Đ·Đ°Ń…Đ°ĐČаць Đ·ĐŒŃĐœĐ”ĐœĐœŃ–?\n"
-"Бягучая ĐșĐ°ĐœŃ„Ń–ĐłŃƒŃ€Đ°Ń†Ń‹Ń:\n"
-"\n"
-"%s"
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Options"
-msgstr "Опцыi"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore system"
+msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” сiŃŃ‚ŃĐŒŃ‹"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Test"
+msgid ""
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
msgstr ""
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "Resolution"
-msgstr "ĐŸĐ°ĐŒĐ”Ń€Ń‹ эĐșŃ€Đ°ĐœŃƒ"
-
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Monitor"
-msgstr "ĐœĐ°ĐœiŃ‚ĐŸŃ€"
+msgid "The DHCP end ip"
+msgstr ""
-#: ../../Xconfig/main.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, fuzzy, c-format
-msgid "Graphic Card"
-msgstr "ВiЮэаĐșарта"
+msgid "Another one"
+msgstr "цiĐșĐ°ĐČĐ°"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Vertical refresh rate"
-msgstr "Đ§Đ°ŃŃ†Ń–ĐœŃ ĐČДртыĐșĐ°Đ»ŃŒĐœĐ°Đč Ń€Đ°Đ·ĐłĐŸŃ€Ń‚Đși"
+msgid "Drakbackup"
+msgstr ""
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Đ§Đ°ŃŃ†Ń–ĐœŃ ĐłĐ°Ń€Ń‹Đ·Đ°ĐœŃ‚Đ°Đ»ŃŒĐœŃ‹Đč Ń€Đ°Đ·ĐłĐŸŃ€Ń‚Đși"
+msgid "Colombia"
+msgstr ""
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
+"Current configuration of `%s':\n"
"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
msgstr ""
-"ДĐČĐ° ĐșŃ€Ń‹Ń‚Ń‹Ń‡ĐœŃ‹Ń… ĐżĐ°Ń€Đ°ĐŒĐ”Ń‚Ń€Ń‹ - гэта Ń‡Đ°ŃŃ†Ń–ĐœŃ ĐČДртыĐșĐ°Đ»ŃŒĐœĐ°Đč Ń€Đ°Đ·ĐłĐŸŃ€Ń‚Đși, цi\n"
-"Ń‡Đ°ŃŃ†Ń–ĐœŃ Đ°ĐŽĐœĐ°ŃžĐ»Đ”ĐœĐœŃ ŃžŃŃĐłĐŸ эĐșŃ€Đ°ĐœŃƒ, Đ° таĐșŃĐ°ĐŒĐ° Đ±ĐŸĐ»Đ”Đč ĐČĐ°Đ¶ĐœŃ‹ ĐżĐ°Ń€Đ°ĐŒĐ”Ń‚Ń€ -\n"
-"Ń‡Đ°ŃŃ†Ń–ĐœŃ ĐłĐ°Ń€Ń‹Đ·Đ°ĐœŃ‚Đ°Đ»ŃŒĐœĐ°Đč сiĐœŃ…Ń€Đ°Đœiзацыi Ń€Đ°Đ·ĐłĐŸŃ€Ń‚Đși, цi Ń‡Đ°ŃŃ†Ń–ĐœŃ ĐČыĐČаЎу\n"
-"раЮĐșĐŸŃž эĐșŃ€Đ°ĐœŃƒ.\n"
-"\n"
-"ВЕЛЬМI ВАЖНА, Đșаб Đ°Đ±Ń€Đ°ĐœŃ‹ ĐČĐ°ĐŒi ĐŒĐ°ĐœiŃ‚ĐŸŃ€ ĐŒĐ”Ńž Ń‡Đ°ŃŃ†Ń–ĐœŃŽ сiĐœŃ…Ń€Đ°Đœiзацыi, яĐșая\n"
-"ĐœĐ” пДраĐČŃ‹ŃˆĐ°Đ” фаĐșŃ‚Ń‹Ń‡ĐœŃ‹Ń ĐŒĐ°ĐłŃ‡Ń‹ĐŒĐ°ŃŃ†i ĐČашага ĐŒĐ°ĐœiŃ‚ĐŸŃ€Ńƒ: у ĐżŃ€ĐŸŃ†iĐ»Đ”ĐłĐ»Ń‹ĐŒ ĐČыпаЮĐșу\n"
-"ĐČы ĐŒĐŸĐ¶Đ°Ń†Đ” сапсаĐČаць ĐŒĐ°ĐœiŃ‚ĐŸŃ€.\n"
-"Калi ĐČы ŃŃƒĐŒĐœŃĐČĐ°Đ”Ń†Đ”ŃŃ, Đ°Đ±ŃŃ€Ń‹Ń†Đ” ĐșĐ°ĐœŃĐ”Ń€ĐČĐ°Ń‚Ń‹ŃžĐœŃ‹Ń ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐși."
#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgid "Plug'n Play"
msgstr ""
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Vendor"
-msgstr "АЎĐșат"
-
-#: ../../Xconfig/monitor.pm:1
-#, c-format
-msgid "Plug'n Play"
-msgstr ""
+msgid "Reunion"
+msgstr "ĐŸĐ°ĐŒĐ”Ń€Ń‹ эĐșŃ€Đ°ĐœŃƒ"
-#: ../../Xconfig/monitor.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Choose a monitor"
-msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” ĐŒĐ°ĐœiŃ‚ĐŸŃ€"
+msgid "Details"
+msgstr "ĐŸĐ°ĐŽŃ€Đ°Đ±ŃĐ·ĐœĐ°ŃŃ†i"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Graphics card: %s"
-msgstr "ВiЮэаĐșарта: %s"
+msgid "For security reasons, it will be disconnected now."
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Выбар ĐżĐ°ĐŒĐ”Ń€Đ°Ńž эĐșŃ€Đ°ĐœŃƒ i глыбiĐœi ĐșĐŸĐ»Đ”Ń€Ńƒ"
+msgid "Synchronization tool"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "Resolutions"
-msgstr "ĐŸĐ°ĐŒĐ”Ń€Ń‹ эĐșŃ€Đ°ĐœŃƒ"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Checking your system..."
+msgstr "ĐŻĐșую сiŃŃ‚ŃĐŒŃƒ ЮруĐșу Вы жаЎаДцД ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць?"
-#: ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 ĐŒiĐ»iярЮа ĐșĐŸĐ»Đ”Ń€Đ°Ńž (24 бiты)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Print"
+msgstr "ĐŸŃ€Ń‹ĐœŃ‚ŃŃ€"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 ĐŒiĐ»ŃŒŃ‘ĐœĐ°Ńž ĐșĐŸĐ»Đ”Ń€Đ°Ńž (24 бiты)"
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 тысяч ĐșĐŸĐ»Đ”Ń€Đ°Ńž (16 бiтаў)"
+msgid "Mongolia"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 тысячы ĐșĐŸĐ»Đ”Ń€Đ°Ńž (15 бiтаў)"
+msgid "Mounted\n"
+msgstr "Đ—Đ°ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐ°\n"
-#: ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 ĐșĐŸĐ»Đ”Ń€Đ°Ńž (8 бiтаў)"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Graphical Interface"
+msgstr "ЗапусĐș X пры старцД сiŃŃ‚ŃĐŒŃ‹"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Is this the correct setting?"
-msgstr "Гэта ĐŽĐ°ĐșĐ»Đ°ĐŽĐœĐ°?"
+msgid "Restore Users"
+msgstr "ĐĐŽĐœĐ°ŃžĐ»Đ”ĐœĐœĐ” Đ· фаĐčлу"
-#: ../../Xconfig/test.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d сДĐșŃƒĐœĐŽĐ°Ńž"
+msgid "Encryption key for %s"
+msgstr "ĐŸĐ°Ń€ĐŸĐ»i ĐœĐ” супаЮаюць"
-#: ../../Xconfig/test.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
+"Portmapper (Đ°ĐłĐ»ŃĐŽĐ°Đ»ŃŒĐœiĐș ĐżĐ°Ń€Ń‚ĐŸŃž) ĐșiŃ€ŃƒĐ” RPC Đ·Đ»ŃƒŃ‡ŃĐœĐœŃĐŒi, яĐșiя Đ·ĐČычаĐčĐœĐ°\n"
+"ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаюцца таĐșiĐŒi пратаĐșĐŸĐ»Đ°ĐŒi яĐș NFS i NIS. Portmap сДрĐČДр паĐČiĐœĐ”Đœ "
+"ĐČыĐșĐŸĐœĐČацца\n"
+"ĐœĐ° ĐŒĐ°ŃˆŃ‹ĐœĐ°Ń… яĐșiя працуюць яĐș сДрĐČДры ĐŽĐ»Ń пратаĐșĐŸĐ»Đ°Ńž, яĐșiя сĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаюць RPC."
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "ĐŸĐ°ĐżŃŃ€ŃĐŽĐ¶Đ°ĐœĐœĐ”: тэсцiраĐČĐ°ĐœĐœĐ” ĐœĐ° гэтаĐč ĐČiЮэаĐșарцД ĐœĐ”Đ±ŃŃĐżĐ”Ń‡ĐœĐ°"
+msgid "Detected hardware"
+msgstr "Đ“Đ». Đ°ĐżiŃĐ°ĐœĐœĐ” Đ°Đ±ŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
-#: ../../Xconfig/test.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "ĐŠi жаЎаДцД пратэсцiраĐČаць ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐși?"
+msgid "Mauritius"
+msgstr ""
-#: ../../Xconfig/test.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Test of the configuration"
-msgstr "ПраĐČДрĐșĐ° ĐżĐ°Ń€Đ°ĐŒĐ”Ń‚Ń€Đ°Ńž ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐși"
+msgid "Myanmar (Burmese)"
+msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../fs.pm:1
#, fuzzy, c-format
-msgid "What norm is your TV using?"
-msgstr "ĐŻĐși тып ĐČашага ISDN Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ?"
+msgid "Enabling swap partition %s"
+msgstr "Đ€Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœĐ” Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ %s"
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
msgstr ""
+"ĐĐ” Đ·ĐœĐŸĐčĐŽĐ·Đ”ĐœĐ° разЎзДлаў FAT ĐŽĐ»Ń Đ·ĐŒŃĐœĐ”ĐœĐœŃ ĐżĐ°ĐŒĐ”Ń€Đ°Ńž Đ°Đ»ŃŒĐ±ĐŸ ĐČыĐșĐ°Ń€Ń‹ŃŃ‚Đ°ĐœĐœŃ\n"
+"ў яĐșасцi ĐČiŃ€Ń‚ŃƒĐ°Đ»ŃŒĐœĐ°Đč фаĐčлаĐČĐ°Đč сiŃŃ‚ŃĐŒŃ‹ (цi ĐœĐ”ĐŽĐ°ŃŃ‚Đ°Ń‚ĐșĐŸĐČĐ° ĐżŃ€Đ°ŃŃ‚ĐŸŃ€Ń‹ ĐœĐ° ЮысĐșу)"
-#: ../../Xconfig/various.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Armenian (old)"
+msgstr "ĐŃ€ĐŒŃĐœŃĐși (стары)"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
msgstr ""
-"ĐœĐŸĐ¶ĐœĐ° ĐœĐ°ŃŃ‚Ń€ĐŸiць сiŃŃ‚ŃĐŒŃƒ ĐŽĐ»Ń Đ°ŃžŃ‚Đ°ĐŒĐ°Ń‚Ń‹Ń‡ĐœĐ°ĐłĐ° запусĐșу X ĐżĐ°ŃĐ»Ń старту сiŃŃ‚ŃĐŒŃ‹.\n"
-"ЖаЎаДцД, Đșаб X стартаĐČаў пры Ń€ŃŃŃ‚Đ°Ń€Ń†Đ”?"
-#: ../../Xconfig/various.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Graphical interface at startup"
-msgstr "ЗапусĐș X пры старцД сiŃŃ‚ŃĐŒŃ‹"
+msgid ""
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
+msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "ХДрĐČДр XFree86: %s\n"
+msgid ", host \"%s\", port %s"
+msgstr ""
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "ХДрĐČДр XFree86: %s\n"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Monaco"
+msgstr "ĐœĐ°ĐœiŃ‚ĐŸŃ€"
-#: ../../Xconfig/various.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Resolution: %s\n"
-msgstr "ĐŸĐ°ĐŒĐ”Ń€Ń‹ эĐșŃ€Đ°ĐœŃƒ: %s\n"
+msgid "%s formatting of %s failed"
+msgstr "%s ĐżĐ°ĐŒŃ‹Đ»ĐșĐ° Ń„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœŃ %s"
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Color depth: %s\n"
-msgstr "ĐŸĐ°Ń€Đ°ĐŒĐ”Ń‚Ń€Ń‹ глыбiĐœi ĐșĐŸĐ»Đ”Ń€Ńƒ: %s\n"
+msgid "Partitioning failed: %s"
+msgstr "ĐŸĐ°ĐŽŃ€Ń‹Ń…Ń‚ĐŸŃžĐșĐ° разЎДлаў ĐœĐ” ŃžĐŽĐ°Đ»Đ°ŃŃ: %s"
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "ВiĐŽŃĐ°ĐżĐ°ĐŒŃŃ†ŃŒ: %s Кб\n"
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "Canada (cable)"
+msgstr "ĐšĐ°ĐœĐ°ĐŽŃĐși (КĐČĐ”Đ±ŃĐș)"
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Graphics card: %s\n"
-msgstr "ВiЮэаĐșарта: %s\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Upgrade"
+msgstr "РазЎзДл %s"
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Đ§Đ°ŃŃ†Ń–ĐœŃ ĐČДрт.разг. ĐŒĐ°ĐœiŃ‚ĐŸŃ€Ńƒ: %s\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Workstation"
+msgstr "НаĐČуĐșĐŸĐČыя прыĐșĐ»Đ°ĐŽĐ°ĐœĐœŃ–"
-#: ../../Xconfig/various.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Đ§Đ°ŃŃ†Ń–ĐœŃ гар.разг. ĐŒĐ°ĐœiŃ‚ĐŸŃ€Ńƒ: %s\n"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” паĐșĐ”Ń‚Ńƒ %s\n"
+"%d%%"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor: %s\n"
-msgstr "ĐœĐ°ĐœiŃ‚ĐŸŃ€: %s\n"
+msgid "Kyrgyzstan"
+msgstr ""
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Мыш: %s\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "With basic documentation"
+msgstr "ĐŃžŃ‚ŃĐœŃ‚Ń‹Ń„iĐșацыя"
-#: ../../Xconfig/various.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Mouse type: %s\n"
-msgstr "бып ĐŒŃ‹ŃˆŃ‹: %s\n"
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anacron, ĐżĐ”Ń€Ń‹ŃĐŽŃ‹Ń‡ĐœŃ‹ ĐșĐ°ĐŒĐ°ĐœĐŽĐœŃ‹ ĐżĐ»Đ°ĐœĐ°ĐČĐ°Đ»ŃŒĐœiĐș."
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "бып ĐșлаĐČiятуры: %s\n"
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"Вы паĐČiĐœĐœŃ‹ ĐŒĐ”Ń†ŃŒ ĐșĐ°Ń€Đ°ĐœŃ‘ĐČы разЎзДл.\n"
+"Đ”Đ»Ń гэтага стĐČарыцД разЎзДл (Đ°Đ»ŃŒĐ±ĐŸ Đ°ĐŽĐ·ĐœĐ°Ń‡Ń†Đ” ŃžĐ¶ĐŸ iŃĐœŃƒŃŽŃ‡Ń‹).\n"
+"ĐŸĐŸŃ‚Ń‹ĐŒ Đ°Đ±ŃŃ€Ń‹Ń†Đ” ``ĐšŃ€ĐŸĐżĐșĐ° ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ'' i ŃžŃŃ‚Đ°ĐœĐ°ĐČiцД ŃĐ” ў `/'"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Options: %s"
-msgstr "Опцыi: %s"
+msgid "Proxy should be http://..."
+msgstr "Proxy паĐČiĐœĐ”Đœ Đ±Ń‹Ń†ŃŒ http://..."
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Mount point: "
-msgstr "ĐŸŃƒĐœĐșт ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ:"
-
-#: ../../diskdrake/dav.pm:1
-#, fuzzy, c-format
-msgid "Server: "
-msgstr "сДрĐČДр"
+msgid "South Africa"
+msgstr ""
-#: ../../diskdrake/dav.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The URL must begin with http:// or https://"
+msgid "Western Sahara"
msgstr ""
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Калі ласĐșĐ°, зрабіцД ĐœĐ”ĐșĐ°Đ»ŃŒĐșі рухаў ĐŒŃ‹ŃˆŃˆŃƒ."
-
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Mount point"
-msgstr "ĐšŃ€ĐŸĐżĐșĐ° ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ"
+msgid "Etherboot Floppy/ISO"
+msgstr "СтĐČарыць загр. ЮысĐș"
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Server"
-msgstr "сДрĐČДр"
+msgid "Modify printer configuration"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ Đ· IĐœŃ‚ŃŃ€ĐœŃŃ‚Đ°ĐŒ"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Mount"
-msgstr "ĐœĐ°ĐœŃ†iраĐČĐ°ĐœĐœĐ”"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Choose a partition"
+msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” ĐŽĐ·Đ”ŃĐœĐœĐ”"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Unmount"
-msgstr "Đ Đ°Đ·ĐŒĐ°ĐœŃ†iраĐČаць"
+msgid "Edit current rule"
+msgstr ""
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "New"
-msgstr "ĐĐŸĐČы"
+msgid "%s"
+msgstr ""
-#: ../../diskdrake/dav.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "ВыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČĐ°ĐčцД ``%s'' Đ·Đ°ĐŒĐ”ŃŃ‚"
-
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Type"
-msgstr "бып"
-
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "СпачатĐșу зрабiцД ``Unmount''"
+msgid "Please test the mouse"
+msgstr "Калі ласĐșĐ°, зрабіцД ĐœĐ”ĐșĐ°Đ»ŃŒĐșі рухаў ĐŒŃ‹ŃˆŃˆŃƒ."
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Delete"
-msgstr "Đ—Đœiшчыць"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Other Media"
+msgstr "Đ†ĐœŃˆŃ‹Ń"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Create"
-msgstr "СтĐČарыць"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup system files"
+msgstr "Đ”Ń€ŃĐœĐœŃ‹ фаĐčĐ» Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČĐ°Đč ĐșĐŸĐżii"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Filesystem types:"
-msgstr "быпы фаĐčлаĐČых сiŃŃ‚ŃĐŒĐ°Ńž:"
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Empty"
-msgstr "Пуста"
+msgid "Sector"
+msgstr "ĐĄĐ”Đșтар"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Windows"
-msgstr "НаĐČуĐșĐŸĐČыя прыĐșĐ»Đ°ĐŽĐ°ĐœĐœŃ–"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "Qatar"
+msgstr "СтартаĐČĐ°Đ” ĐŒĐ”ĐœŃŽ"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "LDAP Base dn"
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Swap"
-msgstr "Swap"
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr ""
+"Вы ĐœĐ” ĐŒĐŸĐ¶Đ°Ń†Đ” ĐČŃ‹Đ±Ń€Đ°Ń†ŃŒ гэты паĐșДт, Ń‚Đ°ĐŒŃƒ яĐș ĐœĐ” хапаД ĐŒĐ”ŃŃ†Đ° ĐŽĐ»Ń ŃĐłĐŸ ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Journalised FS"
-msgstr "ĐżĐ°ĐŒŃ‹Đ»ĐșĐ° ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ"
+msgid "generate auto-install floppy"
+msgstr "СтĐČĐ°Ń€ŃĐœĐœĐ” ЮысĐșДты ĐŽĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
-msgid "No hard drives found"
-msgstr "ЛаĐșĐ°Đ»ŃŒĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
+msgid "Dialing mode"
+msgstr "Đ ŃĐ¶Ń‹ĐŒ Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Please click on a partition"
-msgstr "ĐĐ°Ń†Ń–ŃĐœŃ–Ń†Đ” ĐœĐ° разЎзДл"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
-msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+msgid "File sharing"
msgstr ""
-"Зараз ĐČы ĐŒĐ°Đ”Ń†Đ” Ń‚ĐŸĐ»ŃŒĐși Đ°ĐŽĐ·iĐœ ĐČŃĐ»iĐși разЎзДл FAT\n"
-"(яĐșі Đ·ĐČычаĐčĐœĐ° ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČĐ°Đ” MS Dos/Windows).\n"
-"ĐŸŃ€Đ°ĐżĐ°ĐœŃƒŃŽ, па-ĐżĐ”Ń€ŃˆĐ°Đ”, Đ·ĐŒŃĐœiць ĐżĐ°ĐŒĐ”Ń€Ń‹ разЎзДла\n"
-"(ĐșĐ»iĐșĐœiцД ĐœĐ° ŃĐłĐŸ, Đ° ĐżĐŸŃ‚Ń‹ĐŒ ĐœĐ° \"Đ·ĐŒŃĐœĐ”ĐœĐœĐ” ĐżĐ°ĐŒĐ”Ń€Đ°Ńž\")"
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Choose action"
-msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” ĐŽĐ·Đ”ŃĐœĐœĐ”"
-
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Wizard"
-msgstr "МаĐčстар стĐČĐ°Ń€ŃĐœĐœŃ"
+msgid "Clean /tmp at each boot"
+msgstr "Ачышчаць /tmp пры ĐșĐŸĐ¶ĐœĐ°Đč Đ·Đ°ĐłŃ€ŃƒĐ·Ń†Ń‹"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
+msgid "Malawi"
msgstr ""
-"Калi ĐČы ĐżĐ»Đ°ĐœŃƒĐ”Ń†Đ” ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць boot ĐČĐŸĐ±Đ»Đ°ŃŃ†ŃŒ, таЮы Ń€Đ°Đ·ĐŒŃŃŃ†iцД ŃĐ”\n"
-" ĐœĐ” ЎалДĐč Đ·Đ° 2048 сДĐșŃ‚Đ°Ń€ĐŸŃž Đ°ĐŽ пачатĐșу ЮысĐșĐ°"
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Па-ĐżĐ”Ń€ŃˆĐ°Đ”, зрабiцД Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČую ĐșĐŸĐżiю ĐČашых ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń…"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Please choose your type of mouse."
+msgstr "ĐșĐ°Đ»i ласĐșĐ°, ĐżĐ°Đ·ĐœĐ°Ń‡Ń†Đ” тып ĐČашаĐč ĐŒŃ‹ŃˆŃ‹."
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Read carefully!"
-msgstr "ЧытаĐčцД ўĐČажлiĐČĐ°!"
+msgid "class of hardware device"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Encryption key (again)"
+msgid ""
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Encryption key"
+msgid "United Kingdom"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "The encryption keys do not match"
-msgstr "ĐŸĐ°Ń€ĐŸĐ»i ĐœĐ” супаЮаюць"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Гэты ĐżĐ°Ń€ĐŸĐ»ŃŒ Đ·Đ°ĐœĐ°ĐŽŃ‚Đ° ĐżŃ€ĐŸŃŃ‚Ń‹ (ŃĐłĐŸ ĐŽĐ°ŃžĐ¶Ń‹ĐœŃ паĐČiĐœĐœĐ° Đ±Ń‹Ń†ŃŒ ĐœĐ” ĐŒĐ”ĐœĐ”Đč Đ·Đ° %d Đ»iтараў)"
+msgid "running"
+msgstr "ĐŁĐČага!"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr ""
+msgid "default"
+msgstr "Па ĐŽĐ°ĐŒĐ°ŃžĐ»Đ”ĐœĐœŃŽ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Filesystem encryption key"
-msgstr "бып фаĐčлаĐČĐ°Đč сiŃŃ‚ŃĐŒŃ‹:"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Type: "
-msgstr "бып: "
+msgid "Indonesia"
+msgstr "ĐœŃĐŒĐ°"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, fuzzy, c-format
-msgid "on channel %d id %d\n"
-msgstr "ĐœĐ° ŃˆŃ‹ĐœĐ” %d id %d\n"
+msgid "France [SECAM]"
+msgstr "Đ€Ń€Đ°ĐœŃ†Ń‹Ń"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Partition table type: %s\n"
-msgstr "бып таблiцы разЎзДлаў: %s\n"
+msgid "restrict"
+msgstr "Đ°Đ±ĐŒĐ”Đ¶Đ°ĐČĐ°ĐœĐœĐ”"
-#: ../../diskdrake/interactive.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-ЮысĐși %s\n"
+msgid "must have"
+msgstr "паĐČiĐœĐœŃ‹ ĐŒĐ”Ń†ŃŒ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Info: "
-msgstr "IĐœŃ„Đ°Ń€ĐŒĐ°Ń†Ń‹Ń: "
+msgid ""
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Đ“Đ”Đ°ĐŒĐ”Ń‚Ń€Ń‹Ń: %s цылiĐœĐŽŃ€Đ°Ńž, %s ĐłĐ°Đ»ĐŸĐČĐ°Đș, %s сДĐșтараў\n"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Senegal"
+msgstr "йаблiца"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Size: %s\n"
-msgstr "ĐŸĐ°ĐŒĐ”Ń€: %s\n"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Command line"
+msgstr "IĐŒŃ ĐŽĐ°ĐŒĐ”ĐœŃƒ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
-msgid "Read-only"
+msgid ""
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Device: "
-msgstr "ĐŸŃ€Ń‹Đ»Đ°ĐŽĐ°:"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
+msgid "access to administrative files"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"Error during sendmail.\n"
+" Your report mail was not sent.\n"
+" Please configure sendmail"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "IĐŒŃ фаĐčлу ĐČiŃ€Ń‚ŃƒĐ°Đ»ŃŒĐœĐ°Đč фаĐčлаĐČĐ°Đč сiŃŃ‚ŃĐŒŃ‹: %s"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-ЮысĐși %s\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "ĐŸĐ°ĐŒĐ”Ń€ Ń„Ń€Đ°ĐłĐŒĐ”ĐœŃ‚Ńƒ %s\n"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Level %s\n"
-msgstr "ĐŁĐ·Ń€ĐŸĐČĐ”ĐœŃŒ %s\n"
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
msgstr ""
-"Đ—Đ°ĐłŃ€ŃƒĐ·Đ°Ń‡ĐœŃ‹ разЎзДл па ĐŽĐ°ĐŒĐ°ŃžĐ»Đ”ĐœĐœŃŽ\n"
-" (ĐŽĐ»Ń Đ·Đ°ĐłŃ€ŃƒĐ·Đși MS-DOS, Đ° ĐœĐ” ĐŽĐ»Ń lilo)\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr "ЀаĐčĐ»(ы) ĐČiŃ€Ń‚ŃƒĐ°Đ»ŃŒĐœĐ°Đč фаĐčлаĐČĐ°Đč сiŃŃ‚ŃĐŒŃ‹: %s\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Mounted\n"
-msgstr "Đ—Đ°ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐ°\n"
+msgid "Montserrat"
+msgstr "ĐŸĐŸŃ€Ń‚ ĐŒŃ‹ŃˆŃ‹"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Not formatted\n"
-msgstr "ĐĐ” Đ°ĐŽŃ„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐ°\n"
+msgid "Automatic dependencies"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Formatted\n"
-msgstr "Đ€Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœĐ”\n"
+msgid "Swap"
+msgstr "Swap"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "ĐŠŃ‹Đ»iĐœĐŽŃ€Ń‹ Đ· %d па %d\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s сДĐșтараў"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Size: %s"
-msgstr "ĐŸĐ°ĐŒĐ”Ń€: %s"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "ПачатаĐș: сДĐșтар %s\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Name: "
-msgstr "IĐŒŃ: "
+msgid "Connecting to the Internet "
+msgstr "Đ”Đ°Đ»ŃƒŃ‡ŃĐœĐœĐ” ĐŽĐ° IĐœŃ‚ŃŃ€ĐœŃŃ‚Ńƒ"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Лiтара ĐŽĐ»Ń DOS-ЮысĐșу: %s (ĐœĐ°ŃžĐłĐ°ĐŽ)\n"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore Other"
+msgstr "ĐĐŽĐœĐ°ŃžĐ»Đ”ĐœĐœĐ” Đ· фаĐčлу"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "partition %s is now known as %s"
+msgid "TV card"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "ĐŸĐ°ĐŒĐ”Ń€Ń‹ эĐșŃ€Đ°ĐœŃƒ: %s\n"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "SMB/Windows 95/98/NT"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Copying %s"
+msgid ", "
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Moving files to the new partition"
-msgstr "ĐĐ” хапаД ĐżŃ€Đ°ŃŃ‚ĐŸŃ€Ń‹ ĐŽĐ»Ń стĐČĐ°Ń€ŃĐœĐœŃ ĐœĐŸĐČых разЎзДлаў"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Hide files"
-msgstr "mkraid ĐœĐ” ĐżŃ€Đ°Ń†Đ°Đ·ĐŽĐŸĐ»ŃŒĐœŃ‹"
+msgid "Remove selected host/network"
+msgstr "Đ’Ń‹ĐŽĐ°Đ»iць чаргу ЮруĐșу"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, fuzzy, c-format
-msgid "Move files to the new partition"
-msgstr "ĐĐ” хапаД ĐżŃ€Đ°ŃŃ‚ĐŸŃ€Ń‹ ĐŽĐ»Ń стĐČĐ°Ń€ŃĐœĐœŃ ĐœĐŸĐČых разЎзДлаў"
+msgid ""
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
+msgstr ""
+"Postfix - гэта ĐżĐ°ŃˆŃ‚ĐŸĐČы Ń‚Ń€Đ°ĐœŃĐżĐ°Ń€Ń‚ĐœŃ‹ Đ°ĐłĐ”ĐœŃ‚, ĐżŃ€Đ°ĐłŃ€Đ°ĐŒĐ°, яĐșая\n"
+"ĐżĐ”Ń€Đ°ĐŒŃŃˆŃ‡Đ°Đ” ĐżĐŸŃˆŃ‚Ńƒ Đ· Đ°ĐŽĐœĐŸĐč ĐŒĐ°ŃˆŃ‹ĐœŃ‹ ĐœĐ° ĐčĐœŃˆŃƒŃŽ."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "УсД ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Đ” ў разЎзДлД %s Đ±ŃƒĐŽŃƒŃ†ŃŒ ŃŃ‚Ń€Đ°Ń‡Đ°ĐœŃ‹ ĐżĐ°ŃĐ»Ń Ń„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœŃ"
+msgid "Disconnection from the Internet failed."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Каб Đ·ĐŒŃĐœĐ”ĐœĐœi ўступiĐ»i ў ĐŽĐ·Đ”ŃĐœĐœĐ”, ĐœĐ”ĐŸĐ±Ń…ĐŸĐŽĐœĐ° ĐżĐ”Ń€Đ°Đ·Đ°ĐłŃ€ŃƒĐ·iцца"
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Network Hotplugging"
+msgstr "ĐšĐ°ĐœŃ„iгурацыя сДтĐși"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "йаблiца Ń€Đ°Đ·ĐŒŃŃˆŃ‡ŃĐœĐœŃ прылаЎы %s буЎзД Đ·Đ°ĐżiŃĐ°ĐœĐ° ĐœĐ° ЮысĐș!"
+msgid "if set to yes, reports check result to tty."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "Выбар паĐșДтаў ĐŽĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
+msgid "Restore From CD"
+msgstr "ĐĐŽĐœĐ°ŃžĐ»Đ”ĐœĐœĐ” Đ· ЮысĐșДты"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "What type of partitioning?"
-msgstr "ĐŻĐși тып ЮруĐșарĐși ĐČы ĐŒĐ°Đ”Ń†Đ”?"
+msgid ""
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
+msgstr ""
+"Ваш ĐșĐ°ĐŒĐż'ютар ĐŒĐŸĐ¶Đ° Đ±Ń‹Ń†ŃŒ сĐșĐ°ĐœŃ„Ń–ĐłŃƒŃ€Đ°ĐČĐ°ĐœŃ‹ ĐœĐ° ŃŃƒĐŒĐ”ŃĐœĐ°Đ” ĐČыĐșĐ°Ń€Ń‹ŃŃ‚Đ°ĐœĐœĐ”\n"
+" Đ†ĐœŃ‚ŃŃ€ĐœŃŃ‚Ńƒ (Internet Connection Sharing)?\n"
+"\n"
+"ЗаўĐČага: ĐČĐ°ĐŒ ĐżĐ°Ń‚Ń€ŃĐ±ĐœŃ‹ сДтĐșĐ°ĐČы аЮаптар ĐŽĐ»Ń паЎĐșĐ»ŃŽŃ‡ŃĐœĐœŃ ĐŽĐ° ЛВС.\n"
+"\n"
+"Вы жаЎаДцД ŃƒŃŃ‚Đ°Đ»ŃĐČаць ŃŃƒĐŒĐ”ŃĐœŃ‹ ĐŽĐŸŃŃ‚ŃƒĐż ĐŽĐ° Internet?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Đ‘ŃƒĐŽĐ·ŃŒŃ†Đ” уĐČажлiĐČы. Гэтую апДрацыю ĐœĐ”Đ»ŃŒĐłĐ° Đ°ĐŽĐŒŃĐœiць"
+msgid ""
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr ""
+"Калi ласĐșĐ°, ĐżĐ°Đ·ĐœĐ°Ń‡Ń†Đ” сДтĐșĐ°ĐČы аЮаптар, яĐși ĐżĐ»Đ°ĐœŃƒĐ”Ń†Đ” ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць ĐŽĐ»Ń "
+"ĐŽĐ°Đ»ŃƒŃ‡ŃĐœĐœŃ ĐŽĐ° iĐœŃ‚ŃŃ€ĐœŃŃ‚"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "chunk size"
-msgstr "ĐżĐ°ĐŒĐ”Ń€ Đ±Đ»ĐŸĐșу"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "level"
-msgstr "ŃƒĐ·Ń€ĐŸĐČĐ”ĐœŃŒ"
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
-#, c-format
-msgid "device"
-msgstr "прылаЎа"
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Internet Connection Sharing is now disabled."
+msgstr "ĐĄŃƒĐŒĐ”ŃĐœĐ°Đ” IĐœŃ‚ŃŃ€ĐœŃŃ‚-Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ” зараз Đ·Đ°Đ±Đ°Ń€ĐŸĐœĐ”ĐœĐ°"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Various"
+msgid "if set to yes, verify checksum of the suid/sgid files."
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Mount options"
-msgstr "Опцыi ĐŒĐŸĐŽŃƒĐ»ŃŽ:"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "File already exists. Use it?"
-msgstr "ЀаĐčĐ» ŃƒĐ¶ĐŸ iŃĐœŃƒĐ”. ВыĐșарыстаць ŃĐłĐŸ?"
+msgid "Latin American"
+msgstr "ЛацiĐœĐ°-ĐĐŒĐ”Ń€Ń‹ĐșĐ°ĐœŃĐși"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr ""
-"ЀаĐčĐ» ŃƒĐ¶ĐŸ ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаДцца iĐœŃˆĐ°Đč ĐČiŃ€Ń‚ŃƒĐ°Đ»ŃŒĐœĐ°Đč сiŃŃ‚ŃĐŒĐ°Đč. Калi ласĐșĐ°, \n"
-"Đ°Đ±ŃŃ€Ń‹Ń†Đ” iĐœŃˆŃƒŃŽ ĐœĐ°Đ·ĐČу"
+msgid "Japanese text printing mode"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° сДтĐși"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Give a file name"
-msgstr "ĐŁĐ»Đ°ŃĐœĐ°Đ” iĐŒŃ"
+msgid "Old device file"
+msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” фаĐčĐ»"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Filesystem type: "
-msgstr "бып фаĐčлаĐČĐ°Đč сiŃŃ‚ŃĐŒŃ‹:"
+msgid "Info: "
+msgstr "IĐœŃ„Đ°Ń€ĐŒĐ°Ń†Ń‹Ń: "
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Size in MB: "
-msgstr "ĐŸĐ°ĐŒĐ”Ń€ у ĐœĐ±:"
+#: ../../interactive/stdio.pm:1
+#, fuzzy, c-format
+msgid "Button `%s': %s"
+msgstr "Опцыi: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Loopback file name: "
-msgstr "IĐŒŃ ĐČiŃ€Ń‚ŃƒĐ°Đ»ŃŒĐœĐ°ĐłĐ° Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ"
+msgid "Please wait"
+msgstr "Калi ласĐșĐ°, пачаĐșĐ°ĐčцД"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Loopback"
-msgstr "ВiŃ€Ń‚ŃƒĐ°Đ»ŃŒĐœĐ°Ń фаĐčлаĐČая сiŃŃ‚ŃĐŒĐ° (loopback)"
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "Гэты разЎзДл ĐœĐ” ĐŒĐŸĐ¶Đ° Đ±Ń‹Ń†ŃŒ ĐČыĐșĐ°Ń€Ń‹ŃŃ‚Đ°ĐœŃ‹ паЎ ĐČiŃ€Ń‚ŃƒĐ°Đ»ŃŒĐœŃƒŃŽ фаĐčлаĐČую сiŃŃ‚ŃĐŒŃƒ"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "None"
+msgstr "Đ—Ń€ĐŸĐ±Đ»Đ”ĐœĐ°"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The entered IP is not correct.\n"
+msgstr "Гэта ĐŽĐ°ĐșĐ»Đ°ĐŽĐœĐ°?"
+
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "LVM name?"
+msgid "Ethernet Card"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "new"
-msgstr "ĐœĐŸĐČы"
+msgid "Info"
+msgstr "IĐœŃ„Đ°Ń€ĐŒĐ°Ń†Ń‹Ń"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Đ’Ń‹Đ±ŃŃ€Ń‹Ń†Đ” iŃĐœŃƒŃŽŃ‡Ń‹ LVM ĐŽĐ»Ń ĐŽĐ°Đ±Đ°ŃžĐ»Đ”ĐœĐœŃ"
+msgid "Install"
+msgstr "УсталёўĐșĐ°"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” iŃĐœŃƒŃŽŃ‡Ń‹ RAID ĐŽĐ»Ń ĐŽĐ°ĐŽĐ°ĐœĐœŃ"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr ""
+"ĐĐ°Ń†Ń–ŃĐœŃ–Ń†Đ” \"йаĐș\", Đșалі жаЎаДцД ĐČŃ‹ĐŽĐ°Đ»Ń–Ń†ŃŒ усД ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń\n"
+"і разЎзДлы ĐœĐ° ĐłŃŃ‚Ń‹ĐŒ ЮысĐșу. Đ‘ŃƒĐŽĐ·Ń†Đ” уĐČажліĐČыя, ĐżĐ°ŃĐ»Ń гэтаĐč апДрацыі ĐČы ĐœĐ”\n"
+"\n"
+"Đ·ĐŽĐŸĐ»Đ”Đ”Ń†Đ” Đ°ĐŽĐœĐ°ĐČіць Đ»ŃŽĐ±Ń‹Ń ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń і разЎзДлы, ŃƒĐ»Ń–Ń‡ĐČаючы і ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń Windows\n"
+"\n"
+"\n"
+"ĐĐ°Ń†Ń–ŃĐœŃ–Ń†Đ” \"ĐĐŽĐŒĐ”ĐœĐ°\" Đșаб Đ°ĐŽĐŒŃĐœŃ–Ń†ŃŒ апДрацыю бДз страты ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń… і разЎзДлаў"
-#: ../../diskdrake/interactive.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Moving partition..."
-msgstr "ĐŸĐ”Ń€Đ°ĐœĐŸŃŃ–Ń†Ń†Đ° разЎзДл..."
+msgid "Exit install"
+msgstr "ЗаĐșĐ°ĐœŃ‡ŃĐœĐœĐ” ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Moving"
-msgstr "ĐŸĐ”Ń€Đ°ĐœĐŸŃŃ–ĐŒ"
+msgid ""
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
+msgstr ""
+"УсД Đ°ĐŽĐșĐ°ĐœŃ„Ń–ĐłŃƒŃ€Đ°ĐČĐ°ĐœĐ°.\n"
+"Зараз ĐČы ĐŒĐŸĐ¶Đ°Ń†Đ” ŃŃƒĐŒĐ”ŃĐœĐ° ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць паЎĐșĐ»ŃŽŃ‡ŃĐœĐœĐ” ĐŽĐ° Internet\n"
+"Đ· Ń–ĐœŃˆŃ‹ĐŒŃ– ĐșĐ°ĐŒĐż'ŃŽŃ‚ŃŃ€Đ°ĐŒŃ– ў ĐČашаĐč ЛВС, Đșарыстаючыся Đ°ŃžŃ‚Đ°ĐŒĐ°Ń‚Ń‹Ń‡ĐœŃ‹ĐŒ\n"
+"ĐșĐ°ĐœŃ„Ń–ĐłŃƒŃ€Đ°ĐČĐ°ĐœĐœĐ”ĐŒ (DHCP)."
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "На яĐși сДĐșтар ĐżĐ”Ń€Đ°ĐœĐ”ŃŃ†Ń–?"
+msgid "Remote CUPS server"
+msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ сДрĐČДр CUPS"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Sector"
-msgstr "ĐĄĐ”Đșтар"
+msgid "Sun - Mouse"
+msgstr "Sun - Мыш"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "На яĐși ЮысĐș ĐżĐ”Ń€Đ°ĐœĐ”ŃŃ†Ń–?"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Move"
-msgstr "ĐŸĐ”Ń€Đ°ĐœĐŸŃ"
+#: ../../install_steps_gtk.pm:1
+#, fuzzy, c-format
+msgid "Minimal install"
+msgstr "Đ’Ń‹ĐŽĐ°Đ»iць Đ· сiŃŃ‚ŃĐŒŃ‹"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "New size in MB: "
-msgstr "ĐŸĐ°ĐŒĐ”Ń€ у ĐœĐ±:"
+msgid "Ethiopia"
+msgstr "Đ­ŃŃ‚ĐŸĐœŃĐși"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Choose the new size"
-msgstr "Выбар ĐœĐŸĐČых ĐżĐ°ĐŒĐ”Ń€Đ°Ńž"
+msgid "Devanagari"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Resize"
-msgstr "Đ—ĐŒŃĐœĐ”ĐœĐœĐ” ĐżĐ°ĐŒĐ”Ń€Đ°Ńž"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "УсД ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń ў разЎзДлД %s Đ±ŃƒĐŽŃƒŃ†ŃŒ ŃŃ‚Ń€Đ°Ń‡Đ°ĐœŃ‹"
+msgid "Total size: %d / %d MB"
+msgstr "ĐĐłŃƒĐ»ŃŒĐœŃ‹ ĐżĐ°ĐŒĐ”Ń€: %d / %d Mб"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "УсД ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń ў ĐłŃŃ‚Ń‹ĐŒ разЎзДлД паĐČiĐœĐœŃ‹ Đ±Ń‹Ń†ŃŒ зархiĐČĐ°ĐČĐ°ĐœŃ‹Ń"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "disabled"
+msgstr "йаблiца"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "This partition is not resizeable"
-msgstr "ĐŸĐ°ĐŒĐ”Ń€Ń‹ яĐșĐŸĐłĐ° разЎзДла ĐČы жаЎаДцД Đ·ĐŒŃĐœiць?"
+msgid "Search for new scanners"
+msgstr "Đ”Đ°ŃŃ‚ŃƒĐżĐœŃ‹Ń паĐșДты"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "ĐŸĐ°ĐŽĐ»Ń–Đș ĐŒĐ”Đ¶Đ°Ńž фаĐčлаĐČĐ°Đč сiŃŃ‚ŃĐŒŃ‹ FAT"
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Disabling servers..."
+msgstr "Đ’Ń‹Đ·ĐœĐ°Ń‡ŃĐœĐœĐ” прылаЎаў..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Where do you want to mount %s?"
-msgstr "КуЮы ĐČы жаЎаДцД ĐŒĐ°ĐœŃ†iраĐČаць ĐżŃ€Ń‹Đ»Đ°ĐŽŃƒ %s?"
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr "Выбар паĐșДтаў ĐŽĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Installation of %s failed. The following error occured:"
+msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” %s ĐœĐ” Đ°Ń‚Ń€Ń‹ĐŒĐ°Đ»Đ°ŃŃ. ĐŁĐ·ĐœiĐșла ĐœĐ°ŃŃ‚ŃƒĐżĐœĐ°Ń ĐżĐ°ĐŒŃ‹Đ»ĐșĐ°:"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr ""
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
msgstr ""
-"ĐĐ”Đ»ŃŒĐłĐ° ŃžŃŃ‚Đ°Đ»ŃĐČаць ĐżŃƒĐœĐșт ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ, Ń‚Đ°ĐŒŃƒ ŃˆŃ‚ĐŸ разЎДл ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаДцца ĐŽĐ»Ń\n"
-"ĐČiŃ€Ń‚ŃƒĐ°Đ»ŃŒĐœĐ°Đč фаĐčлаĐČĐ°Đč сiŃŃ‚ŃĐŒŃ‹.\n"
-"СпачатĐșу ĐČŃ‹ĐŽĐ°Đ»iцД ĐČiŃ€Ń‚ŃƒĐ°Đ»ŃŒĐœŃƒŃŽ сiŃŃ‚ŃĐŒŃƒ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "КуЮы ĐČы жаЎаДцД ĐŒĐ°ĐœŃ†iраĐČаць ĐżŃ€Ń‹Đ»Đ°ĐŽŃƒ %s?"
+msgid "Network printer (TCP/Socket)"
+msgstr "ХДтĐșĐ°ĐČы ĐżŃ€Ń‹ĐœŃ‚ŃŃ€ (TCP/Socket)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "КуЮы ĐČы жаЎаДцД ĐŒĐ°ĐœŃ†iраĐČаць ĐČiŃ€Ń‚ŃƒĐ°Đ»ŃŒĐœŃƒŃŽ ĐżŃ€Ń‹Đ»Đ°ĐŽŃƒ %s?"
+msgid "Backup User files..."
+msgstr "Đ”Ń€ŃĐœĐœŃ‹ фаĐčĐ» Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČĐ°Đč ĐșĐŸĐżii"
-#: ../../diskdrake/interactive.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr ""
+msgid "Install system"
+msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” сiŃŃ‚ŃĐŒŃ‹"
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Which filesystem do you want?"
-msgstr "ĐŻĐșую сiŃŃ‚ŃĐŒŃƒ ЮруĐșу Вы жаЎаДцД ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць?"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Change partition type"
-msgstr "Đ—ĐŒŃĐœiць тып Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ"
+msgid "First DNS Server (optional)"
+msgstr "ĐŸĐ”Ń€ŃˆŃ‹ сДрĐČДр DNS"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "УсД ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń ў разЎзДлД %s Đ±ŃƒĐŽŃƒŃ†ŃŒ ŃŃ‚Ń€Đ°Ń‡Đ°ĐœŃ‹ ĐżĐ°ŃĐ»Ń Đ·ĐŒĐ”ĐœŃ‹ ŃĐłĐŸ тыпу"
+"Alternatively, you can specify a device name/file name in the input line"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Remove the loopback file?"
-msgstr "Đ€Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœĐ” ĐČiŃ€Ń‚ŃƒĐ°Đ»ŃŒĐœĐ°ĐłĐ° Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ %s"
+msgid "dhcpd Config..."
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° IDE"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+msgid "The setup has already been done, but it's currently disabled."
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Preference: "
-msgstr "ĐŸĐ°Ń€Đ°ĐŒĐ”Ń‚Ń€Ń‹: "
+msgid "LILO/grub Installation"
+msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” LILO/GRUB"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Start sector: "
-msgstr "ПачатĐșĐŸĐČы сДĐșтар:"
+msgid "Israeli"
+msgstr "Iўрыт"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Create a new partition"
-msgstr "СтĐČĐ°Ń€ŃĐœĐœĐ” ĐœĐŸĐČага Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ"
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "load setting"
+msgstr "Ń„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœĐ”"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Use for loopback"
-msgstr "ВыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць ĐŽĐ»Ń ĐČiŃ€Ń‚ŃƒĐ°Đ»ŃŒĐœĐ°Đč фаĐčлаĐČĐ°Đč сiŃŃ‚ŃĐŒŃ‹"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "ĐĐŽĐ»ŃƒŃ‡ŃĐœĐœĐ” Đ°ĐŽ сДтĐși"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Modify RAID"
-msgstr "Đ—ĐŒŃĐœiць RAID"
+msgid "Floppy can be removed now"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Remove from LVM"
-msgstr "Đ’Ń‹ĐŽĐ°Đ»iць Đ· LVM"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Truly minimal install"
+msgstr "Đ’Ń‹ĐŽĐ°Đ»iць Đ· сiŃŃ‚ŃĐŒŃ‹"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remove from RAID"
-msgstr "Đ’Ń‹ĐŽĐ°Đ»iць Đ· RAID"
+msgid "Denmark"
+msgstr ""
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Add to LVM"
-msgstr "ДаЮаць Юа LVM"
+msgid "Moving partition..."
+msgstr "ĐŸĐ”Ń€Đ°ĐœĐŸŃŃ–Ń†Ń†Đ° разЎзДл..."
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Add to RAID"
-msgstr "ДаЮаць Юа RAID"
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "(This) DHCP Server IP"
+msgstr "IP сДрĐČДра SMB"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Format"
-msgstr "Đ€Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœĐ”"
+msgid "Test of the configuration"
+msgstr "ПраĐČДрĐșĐ° ĐżĐ°Ń€Đ°ĐŒĐ”Ń‚Ń€Đ°Ńž ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐși"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Detailed information"
-msgstr "IĐœŃ„Đ°Ń€ĐŒĐ°Ń†Ń‹Ń"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Trying to rescue partition table"
-msgstr "ĐŸĐ°ŃĐżŃ€Đ°Đ±ŃƒĐ”ĐŒ ĐČыратаĐČаць таблiцу разЎзДлаў"
+msgid "Installing %s ..."
+msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” паĐșĐ”Ń‚Ńƒ %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
+"\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
+"\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
+"\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
+"\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
msgstr ""
-"УстаўцД ЮысĐșĐ”Ń‚Ńƒ ў ЮысĐșĐ°ĐČĐŸĐŽ\n"
-"УсД ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń ĐœĐ° гэтаĐč ЮысĐșДцД Đ±ŃƒĐŽŃƒŃ†ŃŒ ŃŃ‚Ń€Đ°Ń‡Đ°ĐœŃ‹"
-
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Warning"
-msgstr "ĐŁĐČага!"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Select file"
-msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” фаĐčĐ»"
+msgid "Choose your filesystem encryption key"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
msgstr ""
-"йаблiца Ń€Đ°Đ·ĐŒŃŃˆŃ‡ŃĐœĐœŃ Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČага ЮысĐșу ĐŒĐ°Đ” iĐœŃˆŃ‹ ĐżĐ°ĐŒĐ”Ń€\n"
-"ПрацягĐČаць ЎалДĐč?"
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Removable media automounting"
-msgstr "ĐŃžŃ‚Đ°ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœĐ” Đ·ĐŒĐ”ĐœĐœŃ‹Ń… ĐœĐ°Đ·Đ°ĐżĐ°ŃˆĐČĐ°Đ»ŃŒĐœŃ–Đșаў"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Reload partition table"
-msgstr "ДаЮатĐșĐŸĐČая таблiца разЎзДлаў"
+msgid "Andorra"
+msgstr "АЎĐșат"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Rescue partition table"
-msgstr "ДаЮатĐșĐŸĐČая таблiца разЎзДлаў"
+msgid "Sierra Leone"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Restore partition table"
-msgstr "ДаЮатĐșĐŸĐČая таблiца разЎзДлаў"
+msgid "Botswana"
+msgstr "Đ­ŃŃ‚ĐŸĐœŃĐși"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "Save partition table"
-msgstr "Запiс таблiцы разЎзДлаў"
+msgid "(default value: %s)"
+msgstr " ? (Đ·ĐŒĐŸŃžŃ‡Đ°ĐœĐœĐ” %s) "
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
+msgid "Alternative test page (Letter)"
msgstr ""
-"Каб зрабiць Đ±ĐŸĐ»ŃŒŃˆ разЎДлаў, ĐČŃ‹ĐŽĐ°Đ»iцД Đ°ĐŽĐ·iĐœ i стĐČарыцД ĐżĐ°ŃˆŃ‹Ń€Đ°ĐœŃ‹ разЎзДл "
-"(extended)"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "I can't add any more partition"
-msgstr "ДаЮаць разЎзДл ĐœĐ”ĐŒĐ°ĐłŃ‡Ń‹ĐŒĐ°"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "All primary partitions are used"
-msgstr "УсД ĐżĐ”Ń€ŃˆĐ°ŃĐœŃ‹Ń разЎзДлы ĐČыĐșĐ°Ń€Ń‹ŃŃ‚Đ°ĐœŃ‹"
+msgid ""
+"DHCP Server Configuration.\n"
+"\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
+"\n"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, fuzzy, c-format
-msgid "Hard drive information"
-msgstr "IĐœŃ„Đ°Ń€ĐŒĐ°Ń†Ń‹Ń"
+msgid "Choose an X server"
+msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” X сДрĐČДр"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Auto allocate"
-msgstr "Đ Đ°Đ·ĐŒĐ”Ń€ĐșĐ°ĐČаць Đ°ŃžŃ‚Đ°ĐŒĐ°Ń‚Ń‹Ń‡ĐœĐ°"
+msgid "Swap partition size in MB: "
+msgstr "ĐŸĐ°ĐŒĐ”Ń€ swap Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ ў Mб:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Clear all"
-msgstr "Ачысцiць усё"
+msgid ""
+"Other (not drakbackup)\n"
+"keys in place already"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "ĐŠi жаЎаДцД пратэсцiраĐČаць ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐși?"
+msgid "No changes to backup!"
+msgstr "Đ”Ń€ŃĐœĐœŃ‹ фаĐčĐ» Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČĐ°Đč ĐșĐŸĐżii"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "ВыĐčсцi бДз Đ·Đ°Đżiсу таблiцы разЎзДлаў"
+msgid "Formatted\n"
+msgstr "Đ€Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœĐ”\n"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Quit without saving"
-msgstr "ВыĐčсцi бДз Đ·Đ°Ń…Đ°ĐČĐ°ĐœĐœŃ"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Type of install"
+msgstr "Выбар паĐșДтаў ĐŽĐ»Ń ŃƒŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Continue anyway?"
-msgstr "СапраўЮы працягĐČаць?"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "SMB/Windows 95/98/NT"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Toggle to expert mode"
-msgstr "Đ ŃĐ¶Ń‹ĐŒ эĐșŃĐżĐ”Ń€Ń‚Ńƒ"
+msgid ""
+"\n"
+"- Daemon (%s) include:\n"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Toggle to normal mode"
-msgstr "ЗĐČычаĐčĐœŃ‹ Ń€ŃĐ¶Ń‹ĐŒ"
+msgid "%d comma separated numbers"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Undo"
-msgstr "АЎĐșат"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Choose a partition"
-msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” ĐŽĐ·Đ”ŃĐœĐœĐ”"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Choose another partition"
-msgstr "СтĐČĐ°Ń€ŃĐœĐœĐ” ĐœĐŸĐČага Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ"
-
-#: ../../diskdrake/removable.pm:1
-#, fuzzy, c-format
-msgid "Change type"
-msgstr "Đ—ĐŒŃĐœiць тып Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Search servers"
-msgstr "DNS сДрĐČДр"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Domain"
-msgstr "NIS Domain"
+msgid ""
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
+msgstr ""
+"ПратаĐșĐŸĐ» rusers ĐŽĐ°Đ·ĐČĐ°Đ»ŃĐ” ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°ĐŒ сДтĐși ĐČŃ‹Đ·ĐœĐ°Ń‡Đ°Ń†ŃŒ, Ń…Ń‚ĐŸ\n"
+"ўĐČĐ°ĐčŃˆĐŸŃž i ĐżŃ€Đ°Ń†ŃƒĐ” ĐœĐ° ĐŒĐ°ŃˆŃ‹ĐœĐ°Ń… ў сДтцы."
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Username"
-msgstr "IĐŒŃ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșу:"
+msgid "Automatic Steps Configuration"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ĐŒĐ°ĐŽŃĐŒŃƒ"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
msgid ""
-"Please enter your username, password and domain name to access this host."
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
msgstr ""
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Domain Authentication Required"
-msgstr "ĐŃžŃ‚ŃĐœŃ‚Ń‹Ń„iĐșацыя"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Another one"
-msgstr "цiĐșĐ°ĐČĐ°"
+#: ../../lang.pm:1
+#, c-format
+msgid "Barbados"
+msgstr ""
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Which username"
-msgstr "IĐŒŃ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșу:"
+msgid "Please select data to backup..."
+msgstr "Калi ласĐșĐ°, Đ°Đ±ŃŃ€Ń‹Ń†Đ” ĐŒĐŸĐČу ĐŽĐ»Ń ĐșĐ°Ń€Ń‹ŃŃ‚Đ°ĐœĐœŃ."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Can't login using username %s (bad password?)"
+msgid ""
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "cpu # "
+msgid "received"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "SMBus controllers"
+msgid "/File/_New"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The DNS Server IP"
+msgstr "IP сДрĐČДра SMB"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "USB controllers"
+msgid "IP Range End:"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "SCSI controllers"
-msgstr ""
+msgid "High"
+msgstr "Đ’Ń‹ŃĐŸĐși"
-#: ../../harddrake/data.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Firewire controllers"
+msgid "NoVideo"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "(E)IDE/ATA controllers"
+msgid "this field describes the device"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Joystick"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Scanner"
-msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” ĐČiЮэаĐșарту"
+msgid "Local Printers"
+msgstr "ЛаĐșĐ°Đ»ŃŒĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "Unknown/Others"
-msgstr "ĐĐłŃƒĐ»ŃŒĐœŃ‹"
+msgid "Installation image directory"
+msgstr "ЗаĐșĐ°ĐœŃ‡ŃĐœĐœĐ” ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐși"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bridges and system controllers"
-msgstr ""
+msgid "NIS Server"
+msgstr "NIS сДрĐČДр:"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Modem"
-msgstr "ĐŸĐŸŃ€Ń‚ ĐŒŃ‹ŃˆŃ‹"
+msgid "Port: %s"
+msgstr "ĐŸĐŸŃ€Ń‚"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Ethernetcard"
-msgstr "цiĐșĐ°ĐČĐ°"
+msgid "Spain"
+msgstr "IŃĐżĐ°ĐœŃĐși"
-#: ../../harddrake/data.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Processors"
-msgstr ""
+msgid "This user name has already been added"
+msgstr "Гэта iĐŒŃ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșу ŃžĐ¶ĐŸ ĐŽĐ°ĐŽĐ°ĐŽĐ·Đ”ĐœĐ°"
-#: ../../harddrake/data.pm:1
+#: ../../interactive.pm:1
+#, fuzzy, c-format
+msgid "Choose a file"
+msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” ĐŽĐ·Đ”ŃĐœĐœĐ”"
+
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Webcam"
-msgstr ""
+msgid "Apply"
+msgstr "ĐŸŃ€ĐžĐŒĐ”ĐœĐžŃ‚ŃŒ"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Soundcard"
-msgstr "ĐĄŃ‚Đ°ĐœĐŽĐ°Ń€Ń‚ĐœŃ‹"
+msgid "Auto-detect available ports"
+msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Other MultiMedia devices"
-msgstr "Đ†ĐœŃˆŃ‹Ń"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Internet Connection Sharing currently disabled"
+msgstr "ĐĄŃƒĐŒĐ”ŃĐœĐ°Đ” IĐœŃ‚ŃŃ€ĐœŃŃ‚-Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ” зараз Đ·Đ°Đ±Đ°Ń€ĐŸĐœĐ”ĐœĐ°"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Tvcard"
+msgid "San Marino"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, fuzzy, c-format
-msgid "Videocard"
-msgstr "ВiЮэа-Ń€ŃĐ¶Ń‹ĐŒ"
+msgid "Belgium"
+msgstr "Đ‘Đ”Đ»ŃŒĐłiĐčсĐși"
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Tape"
-msgstr "бып: "
+msgid "Kuwait"
+msgstr "ВыхаЮ"
-#: ../../harddrake/data.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "DVD-ROM"
-msgstr ""
+msgid "Choose the window manager to run:"
+msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” ĐŒŃĐœŃĐŽĐ¶Đ°Ń€ ĐČĐŸĐșĐœĐ°Ńž:"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "CD/DVD burners"
+msgid "sub generation of the cpu"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "CDROM"
+msgid "First Time Wizard"
msgstr ""
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Disk"
-msgstr "ДацĐși"
+#: ../../install_steps.pm:1
+#, c-format
+msgid ""
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
+msgstr ""
+"ĐŁĐ·ĐœiĐșла ĐżĐ°ĐŒŃ‹Đ»ĐșĐ°, яĐșую ĐœĐ” Đ°Ń‚Ń€Ń‹ĐŒĐ»Ń–ĐČаДцца ĐșарэĐșŃ‚ĐœĐ° апрацаĐČаць,\n"
+"Ń‚Đ°ĐŒŃƒ працягĐČĐ°ĐčцД ĐœĐ° сĐČаю рызыĐșу."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Zip"
+msgid "please wait, parsing file: %s"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Floppy"
-msgstr "ЗахаĐČĐ°ĐœĐœĐ” ĐœĐ° ЮысĐșĐ”Ń‚Ńƒ"
+msgid "Taiwan"
+msgstr "Đ Đ°Đ·ĐŒĐ”Ń€ĐșĐ°ĐČĐ°ĐœĐœĐ”"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Let me pick any driver"
+msgid "Pakistan"
msgstr ""
-#: ../../harddrake/sound.pm:1
-#, fuzzy, c-format
-msgid "Driver:"
-msgstr "сДрĐČДр"
-
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Permissions"
+msgstr "ВДрсiя: %s\n"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr ""
+msgid "Provider name (ex provider.net)"
+msgstr "IĐŒŃ праĐČĐ°ĐčЮару, ĐœĐ°ĐżŃ€Ń‹ĐșлаЎ праĐČĐ°ĐčЮар.net"
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
-msgstr ""
+msgid "Version: %s\n"
+msgstr "ВДрсiя: %s\n"
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Sound trouble shooting"
+msgid ""
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
+"ĐŁ ВашаĐč сiŃŃ‚ŃĐŒĐ” ĐŒĐ°Đ”Ń†Ń†Đ° ĐœĐ”ĐŽĐ°Ń…ĐŸĐż рэсурсаў, Ń‚Đ°ĐŒŃƒ ĐŒĐ°ĐłŃ‡Ń‹ĐŒŃ‹ ĐżŃ€Đ°Đ±Đ»Đ”ĐŒŃ‹\n"
+"пры ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœi Mandrake Linux. ĐŁ ĐłŃŃ‚Ń‹ĐŒ ĐČыпаЮĐșу ĐżĐ°ŃĐżŃ€Đ°Đ±ŃƒĐčцД тэĐșстаĐČую\n"
+"ĐżŃ€Đ°ĐłŃ€Đ°ĐŒŃƒ ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ. Đ”Đ»Ń гэтага ĐœĐ°Ń†iŃĐœiцД `F1' у час Đ·Đ°ĐłŃ€ŃƒĐ·Đși, Đ° ĐżĐŸŃ‚Ń‹ĐŒ\n"
+"ĐœĐ°Đ±ŃŃ€Ń‹Ń†Đ” `text' i ĐœĐ°Ń†iŃĐœiцД <ENTER>."
-#: ../../harddrake/sound.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr ""
+msgid "Use the Windows partition for loopback"
+msgstr "ВыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць разЎзДл Windows ĐŽĐ»Ń ĐČiŃ€Ń‚ŃƒĐ°Đ»ŃŒĐœĐ°Đč фаĐčлаĐČĐ°Đč сiŃŃ‚ŃĐŒŃ‹"
-#: ../../harddrake/sound.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Unkown driver"
-msgstr ""
+msgid "Armenian (typewriter)"
+msgstr "ĐŃ€ĐŒŃĐœŃĐși (typewriter)"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connection type: "
+msgstr "IĐŒŃ Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Graphical interface"
+msgstr "ЗапусĐș X пры старцД сiŃŃ‚ŃĐŒŃ‹"
+
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr ""
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s Đ· ĐżĐ°ĐŽŃ‚Ń€Ń‹ĐŒĐșĐ°Đč 3D-пасĐșĐ°Ń€ŃĐœĐœŃ"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "India"
+msgstr "IŃ€Đ°ĐœŃĐși"
+
+#: ../../lang.pm:1
#, c-format
-msgid "No known driver"
+msgid "Chad"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Slovakia"
+msgstr "ХлаĐČĐ”ĐœŃĐși"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
+msgid "Singapore"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No open source driver"
+msgid "Cambodia"
msgstr ""
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "ПраĐČДрĐșĐ° ĐżĐ°Ń€Đ°ĐŒĐ”Ń‚Ń€Đ°Ńž ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐși"
-
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
-msgstr ""
+msgid "Monitor HorizSync: %s\n"
+msgstr "Đ§Đ°ŃŃ†Ń–ĐœŃ гар.разг. ĐŒĐ°ĐœiŃ‚ĐŸŃ€Ńƒ: %s\n"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Trouble shooting"
+msgid "Path"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
msgstr ""
-#: ../../harddrake/sound.pm:1
-#, c-format
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr ""
+"Printer %s\n"
+"What do you want to modify on this printer?"
+msgstr "ĐŠi жаЎаДцД пратэсцiраĐČаць ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐși?"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Sound configuration"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ°"
+msgid "Add host"
+msgstr "ДаЮаць ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°"
#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
+"\n"
+"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "No alternative driver"
+msgid ""
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
+"\n"
+"\"Custom\" permit a per-user granularity.\n"
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "enable radio support"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Radio support:"
+msgid "China (broadcast)"
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "PLL setting:"
-msgstr "Ń„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœĐ”"
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr ""
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Number of capture buffers:"
-msgstr ""
+msgid "Use quota for backup files."
+msgstr "Đ”Ń€ŃĐœĐœŃ‹ фаĐčĐ» Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČĐ°Đč ĐșĐŸĐżii"
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Tuner type:"
-msgstr "Đ—ĐŒŃĐœiць тып Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ"
+msgid "Configuring printer \"%s\"..."
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
-#: ../../harddrake/v4l.pm:1
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "Card model:"
-msgstr "АЮрасы ĐżĐ°ĐŒŃŃ†Ń– Đșарты (DMA)"
+msgid "Internet connection"
+msgstr "ĐĄŃƒĐŒĐ”ŃĐœĐ°Đ” IĐœŃ‚ŃŃ€ĐœŃŃ‚-Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ”"
-#: ../../harddrake/v4l.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
msgstr ""
+"Đ—Đ°ĐłŃ€ŃƒĐ·ĐșĐ° ĐŒĐŸĐŽŃƒĐ»ŃŽ %s ĐœĐ” праĐčшла.\n"
+"ЖаЎаДцД паспрабаĐČаць Đ· iĐœŃˆŃ‹ĐŒi ĐżĐ°Ń€Đ°ĐŒĐ”Ń‚Ń€Đ°ĐŒi?"
-#: ../../harddrake/v4l.pm:1
-#, fuzzy, c-format
-msgid "Unknown|Generic"
-msgstr "ĐĐłŃƒĐ»ŃŒĐœŃ‹"
-
-#: ../../harddrake/v4l.pm:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgid "Welcome to the Open Source world."
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgid "Bosnia and Herzegovina"
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../fsedit.pm:1
#, fuzzy, c-format
-msgid "Auto-detect"
-msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
+msgid ""
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
+msgstr ""
+"Đ’Đ°ĐŒ ĐœĐ”Đ°Đ±Ń…ĐŸĐŽĐœĐ° Đ·Đ°ĐŽĐ°Ń†ŃŒ праĐČiĐ»ŃŒĐœŃ‹ тып фаĐčлаĐČĐ°Đč сiŃŃ‚ŃĐŒŃ‹ (ext2, reiserfs)\n"
+"ĐŽĐ»Ń гэтаĐč ĐșŃ€ĐŸĐżĐși ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ\n"
-#: ../../interactive/newt.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Do"
-msgstr "Đ—Ń€ĐŸĐ±Đ»Đ”ĐœĐ°"
+msgid "You must enter a host name or an IP address.\n"
+msgstr "Калі ласĐșĐ°, зрабіцД ĐœĐ”ĐșĐ°Đ»ŃŒĐșі рухаў ĐŒŃ‹ŃˆŃˆŃƒ."
-#: ../../interactive/stdio.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Ваш ĐČыбар? (Đ·ĐŒĐŸŃžŃ‡Đ°ĐœĐœĐ” %s) "
+msgid "Netherlands"
+msgstr ""
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Đ”Ń€ŃĐœĐœŃ‹ ĐČыбар, ĐżĐ°ŃĐżŃ€Đ°Đ±ŃƒĐčцД ŃŃˆŃ‡Đ”\n"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "ЗахаĐČĐ°ĐœĐœĐ” ў фаĐčĐ»"
-#: ../../interactive/stdio.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Re-submit"
-msgstr ""
+msgid "Internal ISDN card"
+msgstr "ĐŁĐœŃƒŃ‚Ń€Đ°ĐœĐ°Ń ISDN Đșарта"
-#: ../../interactive/stdio.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"=> Notice, a label changed:\n"
-"%s"
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
msgstr ""
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
+#: ../../network/modem.pm:1
+#, fuzzy, c-format
+msgid "Title"
+msgstr "йаблiца"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "=> There are many things to choose from (%s).\n"
+msgid "Install & convert Fonts"
msgstr ""
-#: ../../interactive/stdio.pm:1
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Ваш ĐČыбар? (Đ·ĐŒĐŸŃžŃ‡Đ°ĐœĐœĐ” %s) "
-
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid " enter `void' for void entry"
+msgid "WARNING"
msgstr ""
-#: ../../interactive/stdio.pm:1
-#, fuzzy, c-format
-msgid "Do you want to click on this button?"
-msgstr "Вы жаЎаДцД ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць aboot?"
-
-#: ../../interactive/stdio.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Опцыi: %s"
+msgid "Installing bootloader"
+msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” Đ·Đ°ĐłŃ€ŃƒĐ·Ń‡Ń‹Đșу"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Ваш ĐČыбар? (Đ·ĐŒĐŸŃžŃ‡Đ°ĐœĐœĐ” %s) "
+msgid "replay"
+msgstr "ĐŸĐ”Ń€Đ°Đ·Đ°ĐłŃ€ŃƒĐ·iць"
-#: ../../interactive/stdio.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
+msgid "detected %s"
msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
+msgid "Virgin Islands (U.S.)"
msgstr ""
-"Đ—Đ°ĐłŃ€ŃƒĐ·ĐșĐ° ĐŒĐŸĐŽŃƒĐ»ŃŽ %s ĐœĐ” праĐčшла.\n"
-"ЖаЎаДцД паспрабаĐČаць Đ· iĐœŃˆŃ‹ĐŒi ĐżĐ°Ń€Đ°ĐŒĐ”Ń‚Ń€Đ°ĐŒi?"
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Specify options"
-msgstr "ĐŸĐ°Đ·ĐœĐ°Ń‡Ń†Đ” ĐżĐ°Ń€Đ°ĐŒĐ”Ń‚Ń€Ń‹"
-
-#: ../../modules/interactive.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Autoprobe"
-msgstr "ĐŃžŃ‚Đ°ĐżĐŸŃˆŃƒĐș"
+msgid "Bad backup file"
+msgstr "Đ”Ń€ŃĐœĐœŃ‹ фаĐčĐ» Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČĐ°Đč ĐșĐŸĐżii"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"ĐŁ ĐœĐ”ĐșĐ°Ń‚ĐŸŃ€Ń‹Ń… ĐČыпаЮĐșах %s ЮраĐčĐČĐ”Ń€Ńƒ ĐżĐ°Ń‚Ń€ŃĐ±ĐœĐ° ĐœĐ”ĐșĐ°Ń‚ĐŸŃ€Đ°Ń ЮаЮатĐșĐŸĐČая iĐœŃ„Đ°Ń€ĐŒĐ°Ń†Ń‹Ń,\n"
-"алД Đ·ĐČычаĐčĐœĐ° гэта ĐœĐ” ĐżĐ°Ń‚Ń€Đ°Đ±ŃƒĐ”Ń†Ń†Đ°. ĐŠi ĐœĐ” жаЎаДцД ĐČы Đ·Đ°ĐŽĐ°Ń†ŃŒ ĐŽĐ»Ń ŃĐłĐŸ\n"
-"ЮаЮатĐșĐŸĐČыя ĐŸĐżŃ†Ń‹i, цi ĐŽĐ°Đ·ĐČĐŸĐ»iцД ЮраĐčĐČĐ”Ń€Ńƒ пратэсцiраĐČаць ĐŒĐ°ŃˆŃ‹ĐœŃƒ\n"
-"ў ĐżĐŸŃˆŃƒĐșах ĐœĐ”Đ°Đ±Ń…ĐŸĐŽĐœĐ°Đč iĐœŃ„Đ°Ń€ĐŒĐ°Ń†Ń‹i? ĐœĐ°ĐłŃ‡Ń‹ĐŒĐ°, тэсцiраĐČĐ°ĐœĐœĐ” прыĐČŃĐŽĐ·Đ”\n"
-"ĐŽĐ° ŃĐżŃ‹ĐœĐ”ĐœĐœŃ ĐșĐ°ĐŒĐż'ютэру, алД ŃĐœĐŸ ĐœiŃ‡ĐŸĐłĐ° ĐœĐ” сапсуД."
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "ĐŻĐși ЮраĐčĐČДр %s паспрабаĐČаць?"
-
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Module options:"
-msgstr "Опцыi ĐŒĐŸĐŽŃƒĐ»ŃŽ:"
+msgid "Enter IP address and port of the host whose printers you want to use."
+msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
+msgid "Pipe into command"
msgstr ""
-"Вы ĐœĐ” ĐŒĐŸĐ¶Đ°Ń†Đ” Đ·Đ°ĐŽĐ°Ń†ŃŒ ĐŸĐżŃ†Ń‹i ĐŒĐŸĐŽŃƒĐ»ŃŽ %s.\n"
-"Опцыi - у Ń„Đ°Ń€ĐŒĐ°Ń†Đ” ``iĐŒŃ=Đ·ĐœĐ°Ń‡ŃĐœĐœĐ” iĐŒŃ2=Đ·ĐœĐ°Ń‡ŃĐœĐœĐ”2 ...''.\n"
-"НапрыĐșлаЎ, ``io=0x300 irq=7''"
-#: ../../modules/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
msgstr ""
+"ĐŸŃŃžĐœĐ°Đ” Đ°Đ±ŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” ĐżĐ°Ń‚Ń€Đ°Đ±ŃƒĐ” ĐșĐ°ĐŒĐ”Ń€Ń†Ń‹ĐčĐœŃ‹Ń… ЮраĐčĐČДраў ĐŽĐ»Ń працы.\n"
+"ЧастĐșĐŸĐČĐ° Ń–ĐœŃ„Đ°Ń€ĐŒĐ°Ń†Ń‹ŃŽ пра іх ĐŒĐŸĐ¶ĐœĐ° Đ°Ń‚Ń€Ń‹ĐŒĐ°Ń†ŃŒ тут: %s"
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "(module %s)"
-msgstr "(ĐŒĐŸĐŽŃƒĐ»ŃŒ %s)"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” ЮраĐčĐČĐ”Ń€Ńƒ ĐŽĐ»Ń %s Đșарты %s"
-
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "See hardware info"
-msgstr "Đ“Đ». Đ°ĐżiŃĐ°ĐœĐœĐ” Đ°Đ±ŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
-
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "ĐŠi ёсць у ĐČас %s iĐœŃ‚ŃŃ€Ń„Đ”Đčс?"
-
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Do you have another one?"
-msgstr "ĐŠi ёсць у ĐČас iĐœŃˆŃ‹?"
-
-#: ../../modules/interactive.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Đ—ĐœĐŸĐčĐŽĐ·Đ”ĐœŃ‹ %s %s iĐœŃ‚ŃŃ€Ń„Đ”Đčсы"
+msgid "Detecting devices..."
+msgstr "Đ’Ń‹Đ·ĐœĐ°Ń‡ŃĐœĐœĐ” прылаЎаў..."
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "You can configure each parameter of the module here."
+msgid "Click here to launch the wizard ->"
msgstr ""
-#: ../../modules/parameters.pm:1
-#, fuzzy, c-format
-msgid "comma separated strings"
-msgstr "Đ€Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœĐ” разЎзДлаў"
-
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "comma separated numbers"
+msgid "Haiti"
msgstr ""
-#: ../../modules/parameters.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "%d comma separated strings"
+msgid ""
+"Description of the fields:\n"
+"\n"
msgstr ""
-#: ../../modules/parameters.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "%d comma separated numbers"
+msgid "the name of the CPU"
msgstr ""
-#: ../../modules/parameters.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "a number"
-msgstr "ĐŃƒĐŒĐ°Ń€ Ń‚ŃĐ»Đ”Ń„ĐŸĐœŃƒ"
+msgid "Refreshing printer data..."
+msgstr "Чытаю базу ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń… ЮраĐčĐČĐ”Ń€ĐŸŃž CUPS"
-#: ../../network/adsl.pm:1
+#: ../../install2.pm:1
#, c-format
-msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
+msgid "You must also format %s"
msgstr ""
-#: ../../network/adsl.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
+msgid "Be careful: this operation is dangerous."
+msgstr "Đ‘ŃƒĐŽĐ·ŃŒŃ†Đ” уĐČажлiĐČы. Гэтую апДрацыю ĐœĐ”Đ»ŃŒĐłĐ° Đ°ĐŽĐŒŃĐœiць"
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
-#, c-format
-msgid "Connect to the Internet"
-msgstr "Đ”Đ°Đ»ŃƒŃ‡ŃĐœĐœĐ” ĐŽĐ° IĐœŃ‚ŃŃ€ĐœŃŃ‚Ńƒ"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Insert a floppy containing package selection"
+msgstr "УстаўцД ЮысĐșĐ”Ń‚Ńƒ ў ЮысĐșĐ°ĐČĐŸĐŽ %s"
-#: ../../network/adsl.pm:1
-#, c-format
-msgid "Sagem (using pppoa) usb"
-msgstr ""
+#: ../../diskdrake/dav.pm:1
+#, fuzzy, c-format
+msgid "Server: "
+msgstr "сДрĐČДр"
-#: ../../network/adsl.pm:1
-#, c-format
-msgid "Alcatel speedtouch usb"
-msgstr ""
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Security Alerts:"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐși ŃžĐ·Ń€ĐŸŃžĐœŃ Đ±ŃŃĐżĐ”Đși"
-#: ../../network/adsl.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Sweden"
+msgstr "Đ“Đ»."
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "use dhcp"
+msgid "Use Expect for SSH"
msgstr ""
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "use pptp"
-msgstr "ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць pppoe"
+msgid "Poland"
+msgstr "IŃĐ»Đ°ĐœĐŽŃĐși"
-#: ../../network/adsl.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "use pppoe"
-msgstr "ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць pppoe"
+msgid "Importance: %s\n"
+msgstr "Đ—ĐœĐ°Ń‡ĐœĐ°ŃŃ†ŃŒ: %s\n"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Other ports"
-msgstr "IĐœŃˆŃ‹Ń ĐșраiĐœŃ‹"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr "Выбар паĐșДтаў ĐŽĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
#: ../../network/drakfirewall.pm:1
#, fuzzy, c-format
-msgid "Everything (no firewall)"
-msgstr "Ўсё сĐșĐ°ĐœŃ„iгураĐČĐ°ĐœĐ°!"
+msgid "Other ports"
+msgstr "IĐœŃˆŃ‹Ń ĐșраiĐœŃ‹"
-#: ../../network/drakfirewall.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
+msgid "number of capture buffers for mmap'ed capture"
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
+msgid "SMBus controllers"
msgstr ""
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr ""
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Connection timeout (in sec)"
+msgstr "IĐŒŃ Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid "No network card"
-msgstr "сДтĐșĐ°ĐČая Đșарта ĐœĐ” Đ·ĐœĐŸĐčĐŽĐ·Đ”ĐœĐ°"
-
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid "POP and IMAP Server"
-msgstr "сДрĐČДр"
-
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid "Mail Server"
-msgstr "ХДрĐČДр ЮруĐșу"
+msgid "Croatian"
+msgstr "Đ„Đ°Ń€ĐČацĐși"
-#: ../../network/drakfirewall.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Domain Name Server"
-msgstr "IĐŒŃ ĐŽĐ°ĐŒĐ”ĐœŃƒ"
+msgid "Use existing partition"
+msgstr "ВыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць iŃĐœŃƒŃŽŃ‡Ń‹ разЎзДл"
-#: ../../network/drakfirewall.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Web Server"
-msgstr "сДрĐČДр"
+msgid "Unable to contact mirror %s"
+msgstr "Зрабiць ĐœĐ”Đ°ĐșŃ‚Ń‹ŃžĐœŃ‹ĐŒ сДтĐșĐ°ĐČĐ°Đ” Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ”"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Zeroconf host name must not contain a ."
+msgid "/Help/_About..."
msgstr ""
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Host name"
-msgstr "IĐŒŃ ĐŒĐ°ŃˆŃ‹ĐœŃ‹"
-
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Zeroconf Host name"
-msgstr "IĐŒŃ ĐŒĐ°ŃˆŃ‹ĐœŃ‹"
+msgid "Remove user directories before restore."
+msgstr ""
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\n"
-"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
msgstr ""
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
-msgid "Configuring network"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° сДтĐși"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "CUPS printer configuration"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ Đ· IĐœŃ‚ŃŃ€ĐœŃŃ‚Đ°ĐŒ"
-#: ../../network/ethernet.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
+msgid "could not find any font in your mounted partitions"
msgstr ""
-"Калi ласĐșĐ°, ĐżĐ°Đ·ĐœĐ°Ń‡Ń†Đ” сДтĐșĐ°ĐČы аЮаптар, яĐși ĐżĐ»Đ°ĐœŃƒĐ”Ń†Đ” ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць ĐŽĐ»Ń "
-"ĐŽĐ°Đ»ŃƒŃ‡ŃĐœĐœŃ ĐŽĐ° iĐœŃ‚ŃŃ€ĐœŃŃ‚"
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Choose the network interface"
-msgstr "ĐŸĐ°Đ·ĐœĐ°Ń‡Ń†Đ” сДтĐșĐ°ĐČы iĐœŃ‚ŃŃ€Ń„Đ”Đčс"
-
-#: ../../network/ethernet.pm:1
-#, fuzzy, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+msgid "F00f bug"
msgstr ""
-"Нi ĐČĐŸĐŽĐœŃ‹ ethernet сДтĐșĐ°ĐČы аЮаптар у ĐČашаĐč сiŃŃ‚ŃĐŒĐ” ĐœĐ” ĐČŃ‹Đ·ĐœĐ°Ń‡Đ°ĐœŃ‹. Калi ласĐșĐ°, "
-"сĐșарыстаĐčцД ĐșĐ°ĐœŃ„iгурацыĐčĐœŃ‹ iĐœŃŃ‚Ń€ŃƒĐŒŃĐœŃ‚."
+
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#, c-format
+msgid "XFree %s"
+msgstr "ХДрĐČДр XFree86 %s"
#: ../../network/ethernet.pm:1
#, c-format
@@ -8446,1746 +8291,1690 @@ msgstr ""
"ĐŻĐși dhcp ĐșĐ»iĐ”ĐœŃ‚ ĐČы ĐżĐ»Đ°ĐœŃƒĐ”Ń†Đ” ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць?\n"
"Па Đ·ĐŒĐŸŃžŃ‡Đ°ĐœĐœŃŽ, гэта dhcp-client"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Карта ISDN PCI ĐœĐ” Đ·ĐœĐŸĐčĐŽĐ·Đ”ĐœĐ°. Калi ласĐșĐ°, ĐżĐ°Đ·ĐœĐ°Ń‡Ń†Đ” ĐœĐ° ĐœĐ°ŃŃ‚ŃƒĐżĐœŃ‹ĐŒ эĐșŃ€Đ°ĐœĐ”."
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
-msgstr ""
-"Đ’Ń‹Đ·ĐœĐ°Ń‡Đ°ĐœĐ° ISDN PCI Đșарта, алД ĐœĐ”ĐČŃĐŽĐŸĐŒŃ‹ ŃĐ” тып. Калi ласĐșĐ°, ĐżĐ°Đ·ĐœĐ°Ń‡Ń†Đ” PCI "
-"Đșарту ĐœĐ° ĐœĐ°ŃŃ‚ŃƒĐżĐœŃ‹ĐŒ эĐșŃ€Đ°ĐœĐ”."
-
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "ĐŻĐșая ў ĐČас ISDN Đșарта?"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "ISDN Configuration"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ISDN"
+msgid "Domain Name:"
+msgstr "IĐŒŃ ĐŽĐ°ĐŒĐ”ĐœŃƒ"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Abort"
-msgstr "ĐĐŽĐŒŃĐœiць"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "On Floppy"
+msgstr "ЗахаĐČĐ°ĐœĐœĐ” ĐœĐ° ЮысĐșĐ”Ń‚Ńƒ"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Continue"
-msgstr "ĐŸŃ€Đ°Ń†ŃĐłĐœŃƒŃ†ŃŒ"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore"
+msgstr "ĐĐŽĐœĐ°ŃžĐ»Đ”ĐœĐœĐ” Đ· фаĐčлу"
-#: ../../network/isdn.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
msgstr ""
-"\n"
-"Калi ĐČы ĐŒĐ°Đ”Ń†Đ” ISA Đșарту, ĐČДлiŃ‡Ń‹Đœi ĐœĐ° ĐœĐ°ŃŃ‚ŃƒĐżĐœŃ‹ĐŒ эĐșŃ€Đ°ĐœĐ” паĐČiĐœĐœŃ‹ Đ±Ń‹Ń†ŃŒ "
-"ŃĐ°ĐżŃ€Đ°ŃžĐŽĐœŃ‹ĐŒi.\n"
-"\n"
-"Калi ĐČы ĐŒĐ°Đ”Ń†Đ” PCMCIA Đșарту, ĐČы паĐČiĐœĐœŃ‹ ĐČĐ”ĐŽĐ°Ń†ŃŒ irq i io ĐČашаĐč Đșарты.\n"
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "I don't know"
-msgstr "ĐĐ” ĐČŃĐŽĐŸĐŒĐ°"
+msgid "Looking for available packages..."
+msgstr "ĐŸŃ€Đ°ĐłĐ»ŃĐŽ ĐŽĐ°ŃŃ‚ŃƒĐżĐœŃ‹Ń… паĐșДтаў"
-#: ../../network/isdn.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "PCI"
-msgstr "PCI"
+msgid "Init Message"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "Rescue partition table"
+msgstr "ДаЮатĐșĐŸĐČая таблiца разЎзДлаў"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "What kind of card do you have?"
-msgstr "ĐŻĐși тып Đșарты ĐČы ĐŒĐ°Đ”Ń†Đ”?"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connection complete."
+msgstr "IĐŒŃ Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
+msgid "Cyprus"
msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "ĐŻĐși пратаĐșĐŸĐ» ĐČы жаЎаДцД ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць?"
-
-#: ../../network/isdn.pm:1
-#, fuzzy, c-format
-msgid "Protocol for the rest of the world"
-msgstr "ПаЮĐșĐ»ŃŽŃ‡ŃĐœĐœĐ”"
+msgid "Remove from RAID"
+msgstr "Đ’Ń‹ĐŽĐ°Đ»iць Đ· RAID"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
+msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr ""
-"ПаЮĐșĐ»ŃŽŃ‡ŃĐœĐœĐ” \n"
-" ĐœĐ” праз D-ĐșĐ°ĐœĐ°Đ» (ĐČŃ‹Đ»ŃƒŃ‡Đ°ĐœŃ‹Ń ĐșĐ°ĐœĐ°Đ»Ń‹)"
+"Гэты ĐżĐ°Ń€ĐŸĐ»ŃŒ Đ·Đ°ĐœĐ°ĐŽŃ‚Đ° ĐżŃ€ĐŸŃŃ‚Ń‹ (ŃĐłĐŸ ĐŽĐ°ŃžĐ¶Ń‹ĐœŃ паĐČiĐœĐœĐ° Đ±Ń‹Ń†ŃŒ ĐœĐ” ĐŒĐ”ĐœĐ”Đč Đ·Đ° %d Đ»iтараў)"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "European protocol"
-msgstr "Đ•ŃžŃ€ĐŸĐżĐ° (EDSS1)"
+msgid "Configuration Wizards"
+msgstr "ĐšĐ°ĐœŃ„iгурацыя сДтĐși"
-#: ../../network/isdn.pm:1
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Đ•ŃžŃ€ĐŸĐżĐ° (EDSS1)"
+msgid "ISDN connection"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ISDN"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
+msgid "primary"
msgstr ""
-"ĐĐ±ŃŃ€Ń‹Ń†Đ” ĐČашага праĐČĐ°ĐčЮара.\n"
-"ĐșĐ°Đ»i ŃĐłĐŸ ĐœŃĐŒĐ° ў ĐłŃŃ‚Ń‹ĐŒ спiсД, Đ°Đ±ŃŃ€Ń‹Ń†Đ” тып ``IĐœŃˆŃ‹''"
-#: ../../network/isdn.pm:1
-#, fuzzy, c-format
-msgid "External ISDN modem"
-msgstr "ĐŁĐœŃƒŃ‚Ń€Đ°ĐœĐ°Ń ISDN Đșарта"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Internal ISDN card"
-msgstr "ĐŁĐœŃƒŃ‚Ń€Đ°ĐœĐ°Ń ISDN Đșарта"
-
-#: ../../network/isdn.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "ĐŻĐși тып ĐČашага ISDN Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ?"
-
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Network Configuration Wizard"
-msgstr "ĐšĐ°ĐœŃ„iгурацыя сДтĐși"
-
-#: ../../network/isdn.pm:1
-#, fuzzy, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "Đ—ĐœĐŸĐčĐŽĐ·Đ”ĐœĐ° ŃŃ–ŃŃ‚ŃĐŒĐ° сДтĐșĐ°ĐČĐ°Đč Đ±ŃŃĐżĐ”Đșі (firewall)!"
-
-#: ../../network/isdn.pm:1
-#, fuzzy, c-format
-msgid "New configuration (isdn-light)"
-msgstr "Đ—ĐœĐŸĐčĐŽĐ·Đ”ĐœĐ° ŃŃ–ŃŃ‚ŃĐŒĐ° сДтĐșĐ°ĐČĐ°Đč Đ±ŃŃĐżĐ”Đșі (firewall)!"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Which ISDN configuration do you prefer?\n"
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-" tools, but is tricky to configure, and not standard.\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
"\n"
-"We recommand the light configuration.\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
msgstr ""
-#: ../../network/modem.pm:1
-#, fuzzy, c-format
-msgid "Do nothing"
-msgstr "ЧаĐșаДцца"
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Skip"
+msgstr "Прапусцiць"
-#: ../../network/modem.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Install rpm"
-msgstr "УсталёўĐșĐ°"
+msgid "Niue"
+msgstr "ĐłĐ°Đ»ŃŒŃˆŃ‚ŃƒĐș"
-#: ../../network/modem.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
msgstr ""
+"АĐșтыĐČiĐ·Đ°ĐČаць/ЮэаĐșтыĐČiĐ·Đ°ĐČаць усД сДтĐșĐ°ĐČыя iĐœŃ‚ŃŃ€Ń„Đ”Đčсы, сĐșĐ°ĐœŃ„iгураĐČĐ°ĐœŃ‹Ń ĐŽĐ»Ń\n"
+"старту пры Đ·Đ°ĐłŃ€ŃƒĐ·Ń†Ń‹ сiŃŃ‚ŃĐŒŃ‹."
-#: ../../network/modem.pm:1
-#, fuzzy, c-format
-msgid "Title"
-msgstr "йаблiца"
-
-#: ../../network/modem.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Другi сДрĐČДр DNS:"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "First DNS Server (optional)"
-msgstr "ĐŸĐ”Ń€ŃˆŃ‹ сДрĐČДр DNS"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Domain name"
-msgstr "IĐŒŃ ĐŽĐ°ĐŒĐ”ĐœŃƒ"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Script-based"
-msgstr "ĐœĐ° Đ°ŃĐœĐŸĐČĐ” сĐșрыпту"
+msgid "important"
+msgstr "ĐČĐ°Đ¶ĐœĐ°"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Terminal-based"
-msgstr "ĐœĐ° Đ°ŃĐœĐŸĐČĐ” Ń‚ŃŃ€ĐŒiĐœĐ°Đ»Ńƒ"
+msgid "Total Progress"
+msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
+"\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
+"\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
+"\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
+msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Login ID"
-msgstr "IĐŒŃ (login ID)"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Users"
+msgstr "IĐŒŃ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșу:"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Phone number"
-msgstr "ĐŃƒĐŒĐ°Ń€ Ń‚ŃĐ»Đ”Ń„ĐŸĐœŃƒ"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Aruba"
+msgstr "Grub"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Connection name"
-msgstr "IĐŒŃ Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ"
+msgid "Preparing bootloader..."
+msgstr "ĐŸĐ°ĐŽŃ€Ń‹Ń…Ń‚ĐŸŃžĐșĐ° Đ·Đ°ĐłŃ€ŃƒĐ·Ń‡Ń‹ĐșĐ°"
-#: ../../network/modem.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Dialup options"
-msgstr "ĐŸĐ°Ń€Đ°ĐŒĐ”Ń‚Ń€Ń‹ ĐșĐ°ĐŒŃƒŃ‚Đ°ĐČĐ°ĐœĐ°ĐłĐ° Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ (Dialup)"
+msgid "Gateway (e.g. %s)"
+msgstr ""
-#: ../../network/modem.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Да яĐșĐŸĐłĐ° ĐżĐ°ŃĐ»ŃĐŽĐŸŃžĐœĐ°ĐłĐ° ĐżĐŸŃ€Ń‚Ńƒ ĐŽĐ°Đ»ŃƒŃ‡Đ°ĐœŃ‹ ĐŒĐ°ĐŽŃĐŒ?"
+msgid "The passwords do not match"
+msgstr "ĐŸĐ°Ń€ĐŸĐ»i ĐœĐ” супаЮаюць"
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Network Configuration"
-msgstr "ĐšĐ°ĐœŃ„iгурацыя сДтĐși"
+msgid "Examples for correct IPs:\n"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
+msgid "Frequency (MHz)"
msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
+msgid "the number of the processor"
msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "ĐŠi жаЎаДцД пратэсцiраĐČаць ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐși?"
+msgid "Hardware clock set to GMT"
+msgstr "Ваш сiŃŃ‚ŃĐŒĐœŃ‹ гаЎзiĐœĐœiĐș ŃƒŃŃ‚Đ°Đ»ŃĐČĐ°ĐœŃ‹ ĐœĐ° GMT?"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr "Выбар паĐșДтаў ĐŽĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
+msgid "Give a file name"
+msgstr "ĐŁĐ»Đ°ŃĐœĐ°Đ” iĐŒŃ"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Network configuration"
-msgstr "ĐšĐ°ĐœŃ„iгурацыя сДтĐși"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Вы жаЎаДцД, Đșаб ĐłŃŃ‚Đ°Đ” Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ” стартаĐČала пры Đ·Đ°ĐłŃ€ŃƒĐ·Ń†Ń‹?"
+msgid "Please choose the port that your printer is connected to."
+msgstr "Да яĐșĐŸĐłĐ° ĐżĐ°ŃĐ»ŃĐŽĐŸŃžĐœĐ°ĐłĐ° ĐżĐŸŃ€Ń‚Ńƒ ĐŽĐ°Đ»ŃƒŃ‡Đ°ĐœŃ‹ ĐŒĐ°ĐŽŃĐŒ?"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/livedrake:1
#, fuzzy, c-format
-msgid "Internet connection"
-msgstr "ĐĄŃƒĐŒĐ”ŃĐœĐ°Đ” IĐœŃ‚ŃŃ€ĐœŃŃ‚-Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ”"
+msgid "Change Cd-Rom"
+msgstr "Đ—ĐŒŃĐœiць ĐżĐ°ĐŒĐ”Ń€Ń‹ эĐșŃ€Đ°ĐœŃƒ"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
+msgid "Paraguay"
msgstr ""
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Choose the connection you want to configure"
-msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” iĐœŃŃ‚Ń€ŃƒĐŒĐ”ĐœŃ‚, яĐși жаЎаДцД сĐșарыстаць"
-
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "ethernet card(s) detected"
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
msgstr ""
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "LAN connection"
-msgstr "Đ Đ°Đ·ĐŒĐ”Ń€ĐșĐ°ĐČĐ°ĐœĐœĐ”"
-
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "cable connection detected"
-msgstr "Đ—Đ»ŃƒŃ‡ŃĐœĐœĐ” ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
-
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Cable connection"
-msgstr "Đ—Đ»ŃƒŃ‡ŃĐœĐœĐ” ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
-
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "detected"
-msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
-
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "ADSL connection"
-msgstr "Đ Đ°Đ·ĐŒĐ”Ń€ĐșĐ°ĐČĐ°ĐœĐœĐ”"
-
-#: ../../network/netconnect.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "detected %s"
+msgid "There's no known driver for your sound card (%s)"
msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
-msgid "ISDN connection"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ISDN"
+msgid "force"
+msgstr "ĐŸĐ”Ń€Đ°ĐœĐŸŃ"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Winmodem connection"
-msgstr "Đ—Đ»ŃƒŃ‡ŃĐœĐœĐ” ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
+msgid "Exit"
+msgstr "Ext2"
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "detected on port %s"
-msgstr "Đ”ŃƒĐ±Đ»ŃĐČĐ°ĐœĐœĐ” ĐżŃƒĐœĐșту ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ %s"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Normal modem connection"
+msgid ""
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
msgstr ""
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Detecting devices..."
-msgstr "Đ’Ń‹Đ·ĐœĐ°Ń‡ŃĐœĐœĐ” прылаЎаў..."
+msgid "Estonian"
+msgstr "Đ­ŃŃ‚ĐŸĐœŃĐși"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#, fuzzy, c-format
-msgid "Expert Mode"
-msgstr "Đ­ĐșспДрт"
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
+msgstr ""
+"Apache - гэта World Wide Web сДрĐČДр. ĐĐœ ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐ·ĐČаДца ĐŽĐ»Ń Đ°Đ±ŃĐ»ŃƒĐłĐŸŃžĐČĐ°ĐœĐœŃ\n"
+"HTML фаĐčлаў i CGI."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Use auto detection"
+msgid "Add/Del Clients"
msgstr ""
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Choose the profile to configure"
-msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” Đ°ŃĐœĐŸŃžĐœĐ°ĐłĐ° ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°:"
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
+#, c-format
+msgid "Choose the network interface"
+msgstr "ĐŸĐ°Đ·ĐœĐ°Ń‡Ń†Đ” сДтĐșĐ°ĐČы iĐœŃ‚ŃŃ€Ń„Đ”Đčс"
-#: ../../network/netconnect.pm:1
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgid "Unknown Model"
msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
+msgid "CD/DVD burners"
msgstr ""
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
+#: ../../diskdrake/interactive.pm:1
+#, c-format
msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
msgstr ""
-"\n"
-"Вы ĐŒĐŸĐ¶Đ°Ń†Đ” Đ°ĐŽĐșлючыцца ці пДраĐșĐ°ĐœŃ„Ń–ĐłŃƒŃ€Đ°ĐČаць ĐČашаД Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ”."
+"Đ—Đ°ĐłŃ€ŃƒĐ·Đ°Ń‡ĐœŃ‹ разЎзДл па ĐŽĐ°ĐŒĐ°ŃžĐ»Đ”ĐœĐœŃŽ\n"
+" (ĐŽĐ»Ń Đ·Đ°ĐłŃ€ŃƒĐ·Đși MS-DOS, Đ° ĐœĐ” ĐŽĐ»Ń lilo)\n"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"Вы ĐŒĐŸĐ¶Đ°Ń†Đ” Đ°ĐŽĐșлючыцца ці пДраĐșĐ°ĐœŃ„Ń–ĐłŃƒŃ€Đ°ĐČаць ĐČашаД Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ”."
+msgid "choose image"
+msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” ĐŽĐ·Đ”ŃĐœĐœĐ”"
-#: ../../network/netconnect.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Internet connection & configuration"
-msgstr "IĐœŃ‚ŃŃ€ĐœŃŃ‚ Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ” i ĐșĐ°ĐœŃ„iгурацыя"
-
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Configure the connection"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° сДтĐși"
-
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Disconnect"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ISDN"
+msgid "Firewalling configuration detected!"
+msgstr "Đ—ĐœĐŸĐčĐŽĐ·Đ”ĐœĐ° ŃŃ–ŃŃ‚ŃĐŒĐ° сДтĐșĐ°ĐČĐ°Đč Đ±ŃŃĐżĐ”Đșі (firewall)!"
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Connect"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Connection name"
msgstr "IĐŒŃ Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ"
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
+#: ../../standalone/draksplash:1
+#, c-format
msgid ""
-"\n"
-"You can reconfigure your connection."
+"x coordinate of text box\n"
+"in number of characters"
msgstr ""
-"\n"
-"Вы ĐŒĐŸĐ¶Đ°Ń†Đ” Đ°ĐŽĐșлючыцца ці пДраĐșĐ°ĐœŃ„Ń–ĐłŃƒŃ€Đ°ĐČаць ĐČашаД Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ”."
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_gtk.pm:1
#, fuzzy, c-format
+msgid "Updating package selection"
+msgstr "Асабiсты ĐČыбар паĐșДтаў"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "КуЮы ĐČы жаЎаДцД ĐŒĐ°ĐœŃ†iраĐČаць ĐČiŃ€Ń‚ŃƒĐ°Đ»ŃŒĐœŃƒŃŽ ĐżŃ€Ń‹Đ»Đ°ĐŽŃƒ %s?"
+
+#: ../../standalone/drakautoinst:1
+#, c-format
msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
msgstr ""
-"\n"
-"Вы ĐŒĐŸĐ¶Đ°Ń†Đ” Đ°ĐŽĐșлючыцца ці пДраĐșĐ°ĐœŃ„Ń–ĐłŃƒŃ€Đ°ĐČаць ĐČашаД Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ”."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "ĐŻĐș ĐČы ĐżĐ»Đ°ĐœŃƒĐ”Ń†Đ” ĐŽĐ°Đ»ŃƒŃ‡Ń‹Ń†Ń†Đ° ĐŽĐ° IĐœŃ‚ŃŃ€ĐœŃŃ‚Ńƒ?"
+msgid "the number of buttons the mouse has"
+msgstr "2 ĐșĐœĐŸĐżĐși"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
msgstr ""
-"\n"
-"Вы ĐŒĐŸĐ¶Đ°Ń†Đ” Đ°ĐŽĐșлючыцца ці пДраĐșĐ°ĐœŃ„Ń–ĐłŃƒŃ€Đ°ĐČаць ĐČашаД Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ”."
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "You are currently connected to the Internet."
-msgstr "ĐŻĐș ĐČы ĐżĐ»Đ°ĐœŃƒĐ”Ń†Đ” ĐŽĐ°Đ»ŃƒŃ‡Ń‹Ń†Ń†Đ° ĐŽĐ° IĐœŃ‚ŃŃ€ĐœŃŃ‚Ńƒ?"
+msgid "Replay"
+msgstr "ĐŸĐ”Ń€Đ°Đ·Đ°ĐłŃ€ŃƒĐ·iць"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "Proxy паĐČiĐœĐ”Đœ Đ±Ń‹Ń†ŃŒ http://..."
+msgid "Backup other files"
+msgstr "Đ”Ń€ŃĐœĐœŃ‹ фаĐčĐ» Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČĐ°Đč ĐșĐŸĐżii"
-#: ../../network/network.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Proxy should be http://..."
-msgstr "Proxy паĐČiĐœĐ”Đœ Đ±Ń‹Ń†ŃŒ http://..."
+msgid "No floppy drive available"
+msgstr "ДысĐșĐ°ĐČĐŸĐŽ ĐœĐ”ĐŽĐ°ŃŃ‚ŃƒĐżĐœŃ‹"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "FTP proxy"
-msgstr "FTP proxy"
+msgid "Backup files are corrupted"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
+msgid "TV norm:"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Proxies configuration"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° proxy Đșэшуючых сДрĐČДраў"
+msgid "Cpuid family"
+msgstr ""
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "IP аЮрас паĐČiĐœĐ”Đœ Đ±Ń‹Ń†ŃŒ у Ń„Đ°Ń€ĐŒĐ°Ń†Đ” 1.2.3.4"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "32 MB"
+msgstr "32 ĐœĐ±"
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "IP аЮрас паĐČiĐœĐ”Đœ Đ±Ń‹Ń†ŃŒ у Ń„Đ°Ń€ĐŒĐ°Ń†Đ” 1.2.3.4"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian AZERTY (new)"
+msgstr "ЛiŃ‚ĐŸŃžŃĐși AZERTY (ĐœĐŸĐČы)"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Gateway device"
-msgstr "ĐŸŃ€Ń‹Đ»Đ°ĐŽĐ°-ŃˆĐ»ŃŽĐ·"
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
+msgid ""
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
+msgstr ""
+"Вы абралi RAID разЎзДл яĐș ĐșĐ°Ń€Đ°ĐœŃ‘ĐČы.\n"
+"ĐŃĐŒĐ° Đ·Đ°ĐłŃ€ŃƒĐ·Ń‡Ń‹Đșу, яĐși б Đ·Đ°ĐłŃ€ŃƒĐ·iўся бДз /boot разЎзДла.\n"
+"ДаЮаĐčцД разЎДл /boot, ĐșĐ°Đ»i ласĐșĐ°."
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Gateway (e.g. %s)"
+msgid "Previous"
msgstr ""
-#: ../../network/network.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "DNS server"
-msgstr "DNS сДрĐČДр"
+msgid "Other OS (MacOS...)"
+msgstr "IĐœŃˆĐ°Ń АХ (MacOS,...)"
-#: ../../network/network.pm:1
+#: ../../mouse.pm:1
+#, fuzzy, c-format
+msgid "To activate the mouse,"
+msgstr "Калі ласĐșĐ°, зрабіцД ĐœĐ”ĐșĐ°Đ»ŃŒĐșі рухаў ĐŒŃ‹ŃˆŃˆŃƒ."
+
+#: ../../install_interactive.pm:1
#, c-format
+msgid "Bringing up the network"
+msgstr "Đ”Đ°Đ»ŃƒŃ‡ŃĐœĐœĐ” ĐŽĐ° сДтĐși"
+
+#: ../../common.pm:1
+#, fuzzy, c-format
+msgid "Screenshots will be available after install in %s"
+msgstr "Вы ĐŒĐŸĐ¶Đ°Ń†Đ” Đ°Đ±Ń€Đ°Ń†ŃŒ Ń–ĐœŃˆŃ‹Ń ĐŒĐŸĐČы, яĐșiя Đ±ŃƒĐŽŃƒŃ†ŃŒ ĐŽĐ°ŃŃ‚ŃƒĐżĐœŃ‹ ĐżĐ°ŃĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
msgstr ""
-"ĐŁĐČŃĐŽĐ·iцД iĐŒŃ сĐČаёĐč ĐŒĐ°ŃˆŃ‹ĐœŃ‹ (host).\n"
-"IĐŒŃ ĐČашаĐč ĐŒĐ°ŃˆŃ‹ĐœŃ‹ паĐČiĐœĐœĐ° Đ±Ń‹Ń†ŃŒ Đ·Đ°ĐŽĐ°ĐŽĐ·Đ”ĐœĐ° ĐżĐŸŃžĐœĐ°ŃŃ†ŃŽ,\n"
-"ĐœĐ°ĐżŃ€Ń‹ĐșлаЎ ``mybox.mylab.myco.com''.\n"
-"Вы ĐŒĐŸĐ¶Đ°Ń†Đ” таĐșŃĐ°ĐŒĐ° ўĐČДсцi IP аЮрас ŃˆĐ»ŃŽĐ·Ńƒ, ĐșĐ°Đ»i Ń‘Đœ у ĐČас ёсць."
+"На ĐČĐ°ŃˆŃ‹ĐŒ ЮысĐșу Đ±Ń‹Đ»ĐŸ Đ·ĐœĐŸĐčĐŽĐ·Đ”ĐœĐ° Đ±ĐŸĐ»Đ”Đč Đ·Đ° Đ°ĐŽĐ·Ń–Đœ разЎзДл\n"
+"Windows. Калі ласĐșĐ°, Đ°Đ±ŃŃ€Ń‹Ń†Đ” Ń‚ĐŸĐč, ĐżĐ°ĐŒĐ”Ń€ яĐșĐŸĐłĐ° жаЎаДцД Đ·ĐŒŃĐœŃ–Ń†ŃŒ, "
+"ĐșĐ°Đ±ŃƒŃŃ‚Đ°Đ»ŃĐČаць\n"
+"ŃŃ–ŃŃ‚ŃĐŒŃƒ Mandrake Linux.\n"
+"\n"
+"\n"
+"Đ”Đ»Ń iŃ„Đ°Ń€ĐŒĐ°Ń†Ń‹Ń–, ĐșĐŸĐ¶ĐœŃ‹ разЎзДл Đ°ĐŽĐ·ĐœĐ°Ń‡Đ°ĐœŃ‹ яĐș: \"Linux Ń–ĐŒŃ\", \"Windows\n"
+"Ń–ĐŒŃ\" \"CĐČĐŸĐčстĐČы\".\n"
+"\"Linux Đ†ĐŒŃ\" ĐșĐ°ĐŽĐ°ĐČĐ°ĐœĐ° таĐș - \"тып ЮысĐșу\", \"ĐœŃƒĐŒĐ°Ń€ ЮысĐșу\",\"ĐœŃƒĐŒĐ°Ń€ "
+"Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ\n"
+"(ĐœĐ°ĐżŃ€Ń‹ĐșлаЎ, \"hda1\").\n"
+"\n"
+"\n"
+"\"бып ЮысĐșу\" ĐșĐ°ĐŽĐ°ĐČĐ°ĐœŃ‹ яĐș \"hd\", Đșалі гэта IDE, і \"sd\" Đșалі SCSI.\n"
+"\n"
+"\"ĐŃƒĐŒĐ°Ń€ ЮысĐșу\" - ŃŃ–ĐŒĐČĐ°Đ» ĐżĐ°ŃĐ»Ń \"hd\" ці \"sd\". Đ”Đ»Ń IDE ЮысĐșаў:\n"
+" * \"Đ°\" \"master\" ĐœĐ° ĐżĐ”Ń€ŃˆĐ°ŃĐœŃ‹ĐŒ ĐșĐ°ĐœĐ°Đ»Đ” IDE \n"
+" * \"b\" \"slave\" ĐœĐ° ĐżĐ”Ń€ŃˆĐ°ŃĐœŃ‹ĐŒ ĐșĐ°ĐœĐ°Đ»Đ” IDE\n"
+" * \"c\" \"master\" ĐœĐ° ĐŽŃ€ŃƒĐłĐ°ŃĐœŃ‹ĐŒ ĐșĐ°ĐœĐ°Đ»Đ” IDE\n"
+" * \"d\" \"slave\" ĐœĐ° ĐŽŃ€ŃƒĐłĐ°ŃĐœŃ‹ĐŒ ĐșĐ°ĐœĐ°Đ»Đ” IDE\n"
+"\n"
+"\n"
+"Đ”Đ»Ń SCSI ЮысĐșаў - \"a\" гэта \"ĐżĐ”Ń€ŃˆĐ°ŃĐœŃ‹ Đ¶ĐŸŃ€ŃĐșі ЮысĐș\", \"b\" - \"ĐŽŃ€ŃƒĐłĐ°ŃĐœŃ‹ "
+"Đ¶ĐŸŃ€ŃĐșі ЮысĐș\", і Đł.ĐŽ.\n"
+"\n"
+"\"Windows Đ†ĐŒŃ\" ŃŃ–ĐŒĐČĐ°Đ» ĐČашага ЮысĐșу ў Windows (ĐżĐ”Ń€ŃˆŃ‹ ЮысĐș ці\n"
+"разЎзДл ĐżĐ°Đ·ĐœĐ°Ń‡Đ°Đ”Ń†Ń†Đ° яĐș \"C:\")."
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
+msgid "Tanzania"
msgstr ""
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Computing FAT filesystem bounds"
+msgstr "ĐŸĐ°ĐŽĐ»Ń–Đș ĐŒĐ”Đ¶Đ°Ńž фаĐčлаĐČĐ°Đč сiŃŃ‚ŃĐŒŃ‹ FAT"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
+"\n"
+"Backup Sources: \n"
msgstr ""
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP аЮрас паĐČiĐœĐ”Đœ Đ±Ń‹Ń†ŃŒ у Ń„Đ°Ń€ĐŒĐ°Ń†Đ” 1.2.3.4"
+msgid "Content of the file"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Start at boot"
-msgstr "СтĐČарыць загр. ЮысĐș"
+msgid "Authentication LDAP"
+msgstr "ĐŃžŃ‚ŃĐœŃ‚Ń‹Ń„iĐșацыя"
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Калі ласĐșĐ°, зрабіцД ĐœĐ”ĐșĐ°Đ»ŃŒĐșі рухаў ĐŒŃ‹ŃˆŃˆŃƒ."
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Let me pick any driver"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Network Hotplugging"
-msgstr "ĐšĐ°ĐœŃ„iгурацыя сДтĐși"
+msgid "Profile "
+msgstr "ĐżĐ°ĐŒŃ‹Đ»ĐșĐ° ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ: "
-#: ../../network/network.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Track network card id (useful for laptops)"
+msgid "transmitted"
msgstr ""
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "DHCP host name"
-msgstr "IĐŒŃ ĐŒĐ°ŃˆŃ‹ĐœŃ‹"
+msgid "Palestine"
+msgstr "Асабiсты ĐČыбар паĐșДтаў"
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Netmask"
-msgstr "МасĐșĐ° сДтĐși"
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "IP address"
-msgstr "IP аЮрас"
-
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp)"
+msgid "%d comma separated strings"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Automatic IP"
-msgstr "ĐŃžŃ‚Đ°ĐŒĐ°Ń‚Ń‹Ń‡ĐœŃ‹ IP"
+msgid "Here is the full list of keyboards available"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid " (driver %s)"
-msgstr "ХДрĐČДр XFree86: %s\n"
+msgid "Theme name"
+msgstr "IĐŒŃ ĐŽĐ»Ń Ń€Đ°Đ·ĐŒĐ”Ń€ĐșĐ°ĐČĐ°ĐœĐ°ĐłĐ° рэсурсу"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Configuring network device %s"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° сДтĐșĐ°ĐČĐ°Đč прылаЎы %s"
+msgid "/_Help"
+msgstr "/_Đ”Đ°ĐżĐ°ĐŒĐŸĐłĐ°"
-#: ../../network/network.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
msgstr ""
-"Калi ласĐșĐ°, уĐČŃĐŽĐ·iцД IP ĐșĐ°ĐœŃ„iгурацыю ĐŽĐ»Ń ĐČашаĐč ĐŒĐ°ŃˆŃ‹ĐœŃ‹.\n"
-"ĐšĐŸĐ¶ĐœŃ‹ ĐżŃƒĐœĐșт паĐČiĐœĐ”Đœ Đ±Ń‹Ń†ŃŒ Đ·Đ°ĐżĐŸŃžĐœĐ”ĐœŃ‹ яĐș IP аЮрас ў ĐŽĐ·Đ”ŃŃŃ‚ĐșĐŸĐČĐ°-ĐșŃ€ĐŸĐżĐșĐ°ĐČĐ°Đč \n"
-"ĐœĐ°Ń‚Đ°Ń†Ń‹i (ĐœĐ°ĐżŃ€Ń‹ĐșлаЎ, 1.2.3.4)."
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
+msgid "the width of the progress bar"
msgstr ""
-#: ../../network/shorewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
+msgid "Cook Islands"
msgstr ""
-"ĐŁĐČага! Đ—ĐœĐŸĐčĐŽĐ·Đ”ĐœĐ° Ń–ŃĐœŃƒŃŽŃ‡Đ°Ń сiŃŃ‚ŃĐŒĐ° сДтĐșĐ°ĐČĐ°Đč Đ±ŃŃĐżĐ”Đși (firewall). Đ’Đ°ĐŒ ĐŒĐ°ĐłŃ‡Ń‹ĐŒĐ° "
-"ŃĐżĐ°Ń‚Ń€ŃĐ±Ń–Ń†Ń†Đ° сĐșарэĐșтаĐČаць ŃĐ” ĐżĐ°ŃĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ."
-#: ../../network/shorewall.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Đ—ĐœĐŸĐčĐŽĐ·Đ”ĐœĐ° ŃŃ–ŃŃ‚ŃĐŒĐ° сДтĐșĐ°ĐČĐ°Đč Đ±ŃŃĐżĐ”Đșі (firewall)!"
+msgid "Formatting partition %s"
+msgstr "Đ€Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœĐ” Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ %s"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Hostname required"
+msgstr "IĐŒŃ ĐŒĐ°ŃˆŃ‹ĐœŃ‹"
+
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Account Password"
-msgstr "ĐŸĐ°Ń€ĐŸĐ»ŃŒ ĐŽĐ»Ń ўĐČĐ°Ń…ĐŸĐŽŃƒ"
+msgid "Unselect fonts installed"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Account Login (user name)"
-msgstr "IĐŒŃ ĐŽĐ»Ń ўĐČĐ°Ń…ĐŸĐŽŃƒ (iĐŒŃ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșу)"
+msgid "Cancel"
+msgstr "ĐĐŽĐŒĐ”ĐœĐ°"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Connection timeout (in sec)"
-msgstr "IĐŒŃ Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ"
+msgid "Searching for configured scanners ..."
+msgstr "Đ”Đ°ŃŃ‚ŃƒĐżĐœŃ‹Ń паĐșДты"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../mouse.pm:1
+#, c-format
+msgid "Wheel"
+msgstr "З ĐșĐŸĐ»Đ°ĐŒ"
+
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "Connection speed"
-msgstr "IĐŒŃ Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ"
+msgid "Videocard"
+msgstr "ВiЮэа-Ń€ŃĐ¶Ń‹ĐŒ"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Dialing mode"
-msgstr "Đ ŃĐ¶Ń‹ĐŒ Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ"
+msgid "\tBackups use tar and bzip2\n"
+msgstr ""
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Choose your country"
-msgstr "Выбар ĐșлаĐČiятуры"
+msgid "Remove Selected"
+msgstr "Đ’Ń‹ĐŽĐ°Đ»iць чаргу ЮруĐșу"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 2 праĐČĐ°ĐčЮару"
+msgid "/Autodetect _modems"
+msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 1 праĐČĐ°ĐčЮару"
-
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Provider phone number"
-msgstr "ĐŃƒĐŒĐ°Ń€ Ń‚ŃĐ»Đ”Ń„ĐŸĐœŃƒ праĐČĐ°ĐčЮара"
-
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "IĐŒŃ праĐČĐ°ĐčЮару, ĐœĐ°ĐżŃ€Ń‹ĐșлаЎ праĐČĐ°ĐčЮар.net"
-
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Your personal phone number"
-msgstr "Ваш асабiсты Ń‚ŃĐ»Đ”Ń„ĐŸĐœĐœŃ‹ ĐœŃƒĐŒĐ°Ń€"
-
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Card IO_1"
-msgstr "IO_1 Đșарты"
+msgid "Remove printer"
+msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Card IO_0"
-msgstr "IO_0 Đșарты"
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
+msgstr ""
+"УВАГА!\n"
+"\n"
+"DrakX зараз паĐČiĐœĐ”Đœ Đ·ĐŒŃĐœiць ĐżĐ°ĐŒĐ”Ń€ ĐČашага разЎзДла Windows.\n"
+"Đ‘ŃƒĐŽĐ·ŃŒŃ†Đ” ўĐČажлiĐČы: гэтая Đ°ĐżĐ”Ń€Đ°Ń†Ń‹Ń ĐœĐ”Đ±ŃŃĐżĐ”Ń‡ĐœĐ°. Калi ĐČы яшчэ ĐœĐ” зрабiĐ»i \n"
+"Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČую ĐșĐŸĐżiю ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń…, Ń‚ĐŸ спачатĐșу паĐșiĐœŃŒŃ†Đ” ĐżŃ€Đ°ĐłŃ€Đ°ĐŒŃƒ ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ,"
+"ĐČыĐșĐ°ĐœĐ°ĐčцД scandisk i defrag ĐœĐ° ĐłŃŃ‚Ń‹ĐŒ разЎДлД, зрабiцД Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČую ĐșĐŸĐżiю\n"
+"ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń… i Ń‚ĐŸĐ»ŃŒĐși ĐżĐŸŃ‚Ń‹ĐŒ Đ·ĐœĐŸŃž ĐČŃŃ€ĐœiŃ†Đ”ŃŃ ĐŽĐ° ĐżŃ€Đ°ĐłŃ€Đ°ĐŒŃ‹ ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ.\n"
+"Калi паЮрыхтаĐČĐ°Đ»iся, ĐœĐ°Ń†iŃĐœiцД Ok."
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Card IO"
-msgstr "IO Đșарты"
+msgid "Which services would you like to allow the Internet to connect to?"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Card mem (DMA)"
-msgstr "АЮрасы ĐżĐ°ĐŒŃŃ†Ń– Đșарты (DMA)"
+msgid ""
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Card IRQ"
-msgstr "IRQ Đșарты"
+msgid "Other"
+msgstr "Đ†ĐœŃˆŃ‹Ń"
-#: ../../network/tools.pm:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
-msgid "Please fill or check the field below"
-msgstr "Калi ласĐșĐ°, Đ·Đ°ĐżĐŸŃžĐœiцД цi ĐżĐ°Đ·ĐœĐ°Ń‡Ń†Đ” ĐżĐŸĐ»Đ” ĐœiĐ¶ŃĐč"
+msgid "Default"
+msgstr "Па ĐŽĐ°ĐŒĐ°ŃžĐ»Đ”ĐœĐœŃŽ"
-#: ../../network/tools.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Connection Configuration"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ĐŽĐ°Đ»ŃƒŃ‡ŃĐœĐœŃ ĐŽĐ° IĐœŃ‚ŃŃ€ĐœŃŃ‚Ńƒ"
-
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+msgid "Button 2 Emulation"
msgstr ""
-"\n"
-"Вы ĐŒĐŸĐ¶Đ°Ń†Đ” Đ°ĐŽĐșлючыцца ці пДраĐșĐ°ĐœŃ„Ń–ĐłŃƒŃ€Đ°ĐČаць ĐČашаД Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ”."
-#: ../../network/tools.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "For security reasons, it will be disconnected now."
+msgid "type1inst building"
msgstr ""
-#: ../../network/tools.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "The system is now connected to the Internet."
-msgstr "ĐŻĐș ĐČы ĐżĐ»Đ°ĐœŃƒĐ”Ń†Đ” ĐŽĐ°Đ»ŃƒŃ‡Ń‹Ń†Ń†Đ° ĐŽĐ° IĐœŃ‚ŃŃ€ĐœŃŃ‚Ńƒ?"
+msgid "Abiword"
+msgstr "ĐĐŽĐŒŃĐœiць"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Testing your connection..."
-msgstr "ĐŻĐși тып ĐČашага ISDN Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ?"
-
-#: ../../network/tools.pm:1
-#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "ĐŠi жаЎаДцД зараз паспрабаĐČаць ĐŽĐ°Đ»ŃƒŃ‡Ń‹Ń†Ń†Đ° ĐŽĐ° IĐœŃ‚ŃŃ€ĐœŃŃ‚Ńƒ?"
-
-#: ../../network/tools.pm:1
-#, c-format
-msgid "Internet configuration"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ Đ· IĐœŃ‚ŃŃ€ĐœŃŃ‚Đ°ĐŒ"
-
-#: ../../partition_table/raw.pm:1
-#, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
-msgstr ""
+msgid "choose image file"
+msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” ĐŽĐ·Đ”ŃĐœĐœĐ”"
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid " (Default)"
-msgstr " (Па ĐŽĐ°ĐŒĐ°ŃžĐ»Đ”ĐœĐœŃŽ)"
+msgid "X server"
+msgstr "X сДрĐČДр"
-#: ../../printer/cups.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP сДрĐČДра SMB"
+msgid "Domain Admin User Name"
+msgstr "IĐŒŃ ĐŽĐ°ĐŒĐ”ĐœŃƒ"
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../standalone/drakxtv:1
#, fuzzy, c-format
-msgid "Remote Printers"
-msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
-
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
-#, c-format
-msgid "CUPS"
-msgstr ""
+msgid "There was an error while scanning for TV channels"
+msgstr "ĐŃ‚Ń€Ń‹ĐŒĐ°Đ»Đ°ŃŃ ĐżĐ°ĐŒŃ‹Đ»ĐșĐ° ўпараЮĐșĐ°ĐČĐ°ĐœĐœŃ паĐșДтаў:"
-#: ../../printer/cups.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "(on this machine)"
-msgstr ""
+msgid "US keyboard (international)"
+msgstr "US ĐșлаĐČiятура (ĐŒiĐ¶ĐœĐ°Ń€ĐŸĐŽĐœĐ°Ń)"
-#: ../../printer/cups.pm:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(ĐŒĐŸĐŽŃƒĐ»ŃŒ %s)"
+msgid "Not installed"
+msgstr "ЗаĐșĐ°ĐœŃ‡ŃĐœĐœĐ” ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
-#: ../../printer/data.pm:1
-#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "LAN connection"
+msgstr "Đ Đ°Đ·ĐŒĐ”Ń€ĐșĐ°ĐČĐ°ĐœĐœĐ”"
-#: ../../printer/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "LPRng"
+msgid "/File/-"
msgstr ""
-#: ../../printer/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr ""
+msgid "Italian"
+msgstr "IŃ‚Đ°Đ»ŃŒŃĐœŃĐși"
-#: ../../printer/data.pm:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
-msgid "LPD"
-msgstr ""
+msgid "Basic"
+msgstr "ĐŸŃ€ĐŸŃŃ‚Ń‹Đ”"
-#: ../../printer/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "LPD - Line Printer Daemon"
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
msgstr ""
-#: ../../printer/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "PDQ"
+msgid "Honduras"
msgstr ""
-#: ../../printer/data.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "PDQ - Print, Don't Queue"
+msgid "pdq"
msgstr ""
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Unknown Model"
-msgstr ""
+msgid "Card IO"
+msgstr "IO Đșарты"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Unknown model"
+msgid "when checked, owner and group won't be changed"
msgstr ""
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "%s (Port %s)"
-msgstr "ĐŸĐŸŃ€Ń‚"
-
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Host %s"
-msgstr "IĐŒŃ ĐŒĐ°ŃˆŃ‹ĐœŃ‹"
-
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Network %s"
-msgstr "ХДтĐșĐ°:"
-
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Interface \"%s\""
-msgstr "ХДтĐșĐ°ĐČы iĐœŃ‚ŃŃ€Ń„Đ”Đčс"
-
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Local network(s)"
-msgstr "сДтĐșĐ°ĐČая Đșарта ĐœĐ” Đ·ĐœĐŸĐčĐŽĐ·Đ”ĐœĐ°"
-
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Raw printer (No driver)"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ", using command %s"
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgid "\t-Network by FTP.\n"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
+msgid "Russian (Yawerty)"
+msgstr "РусĐși (ĐŻ-В-Е-Đ -Đą-И)"
-#: ../../printer/main.pm:1
-#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "You must enter a device or file name!"
+msgstr "URI ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
-#: ../../printer/main.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "ĐŸĐ°ĐŒŃ‹Đ»ĐșĐ° Đ·Đ°Đżiсу ў фаĐčĐ» %s"
+msgid "/_Quit"
+msgstr "ВыхаЮ"
-#: ../../printer/main.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ", multi-function device"
+msgid ""
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
+msgid "Graphics memory: %s kB\n"
+msgstr "ВiĐŽŃĐ°ĐżĐ°ĐŒŃŃ†ŃŒ: %s Кб\n"
-#: ../../printer/main.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ", multi-function device on USB"
+msgid ""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ", multi-function device on parallel port \\#%s"
+msgid "access to compilation tools"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid ", USB printer"
-msgstr "IĐŒŃ ЮруĐșарĐși"
-
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid ", USB printer \\#%s"
-msgstr ""
+msgid "Please select data to restore..."
+msgstr "Калi ласĐșĐ°, Đ°Đ±ŃŃ€Ń‹Ń†Đ” ĐŒĐŸĐČу ĐŽĐ»Ń ĐșĐ°Ń€Ń‹ŃŃ‚Đ°ĐœĐœŃ."
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid " on parallel port \\#%s"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
msgstr ""
+"Калi ĐČы ĐżĐ»Đ°ĐœŃƒĐ”Ń†Đ” ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць boot ĐČĐŸĐ±Đ»Đ°ŃŃ†ŃŒ, таЮы Ń€Đ°Đ·ĐŒŃŃŃ†iцД ŃĐ”\n"
+" ĐœĐ” ЎалДĐč Đ·Đ° 2048 сДĐșŃ‚Đ°Ń€ĐŸŃž Đ°ĐŽ пачатĐșу ЮысĐșĐ°"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Local Printers"
-msgstr "ЛаĐșĐ°Đ»ŃŒĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
+msgid "Standard test page"
+msgstr "ĐĄŃ‚Đ°ĐœĐŽĐ°Ń€Ń‚ĐœŃ‹"
-#: ../../printer/main.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Pipe job into a command"
-msgstr ""
+msgid "Create"
+msgstr "СтĐČарыць"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Enter a printer device URI"
-msgstr "URI ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
+msgid "What"
+msgstr "ЧаĐșĐ°ĐčцД"
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Printer on NetWare server"
-msgstr "ХДрĐČДр ЮруĐșу"
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "There was an error ordering packages:"
+msgstr "ĐŃ‚Ń€Ń‹ĐŒĐ°Đ»Đ°ŃŃ ĐżĐ°ĐŒŃ‹Đ»ĐșĐ° ўпараЮĐșĐ°ĐČĐ°ĐœĐœŃ паĐșДтаў:"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer/main.pm:1
-#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "ХДтĐșĐ°ĐČы ĐżŃ€Ń‹ĐœŃ‚ŃŃ€ (TCP/Socket)"
+msgid "Bulgarian (BDS)"
+msgstr "БалгарсĐși"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Printer on remote lpd server"
-msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ сДрĐČДр lpd"
+msgid "Disable Server"
+msgstr "ХДрĐČДр ЮруĐșу"
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Printer on remote CUPS server"
-msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ сДрĐČДр CUPS"
+msgid "Filesystem encryption key"
+msgstr "бып фаĐčлаĐČĐ°Đč сiŃŃ‚ŃĐŒŃ‹:"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Remote printer"
-msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
+msgid "Gujarati"
+msgstr ""
-#: ../../printer/main.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Local printer"
-msgstr "ЛаĐșĐ°Đ»ŃŒĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
+msgid ""
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Configuring applications..."
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
+msgid "Save theme"
+msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” сiŃŃ‚ŃĐŒŃ‹"
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Printerdrake"
-msgstr "ĐŸŃ€Ń‹ĐœŃ‚ŃŃ€"
+msgid "group"
+msgstr "ĐŸŃ€Đ°Ń†ĐŸŃžĐœĐ°Ń група"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Чытаю базу ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń… ЮраĐčĐČĐ”Ń€ĐŸŃž CUPS"
+#: ../../lang.pm:1
+#, c-format
+msgid "Brazil"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "ĐŠi жаЎаДцД пратэсцiраĐČаць ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐși?"
+msgid "Auto Install"
+msgstr "УсталёўĐșĐ°"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "Remove printer"
-msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
+msgid "Network Configuration Wizard"
+msgstr "ĐšĐ°ĐœŃ„iгурацыя сДтĐși"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Learn how to use this printer"
-msgstr "ĐŠi жаЎаДцД пратэсцiраĐČаць ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐși?"
+msgid "Removable media automounting"
+msgstr "ĐŃžŃ‚Đ°ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœĐ” Đ·ĐŒĐ”ĐœĐœŃ‹Ń… ĐœĐ°Đ·Đ°ĐżĐ°ŃˆĐČĐ°Đ»ŃŒĐœŃ–Đșаў"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, fuzzy, c-format
-msgid "Print test pages"
-msgstr "ДруĐș тэстаĐČых ŃŃ‚Đ°Ń€ĐŸĐœĐ°Đș"
+msgid "Printing"
+msgstr "ĐŸŃ€Ń‹ĐœŃ‚ŃŃ€"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgid "Unkown driver"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
+"There are no printers found which are directly connected to your machine"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "Create a new partition"
+msgstr "СтĐČĐ°Ń€ŃĐœĐœĐ” ĐœĐŸĐČага Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr ""
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid "Driver:"
+msgstr "сДрĐČДр"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
+msgid "unknown"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr ""
+msgid "Use fdisk"
+msgstr "ВыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць fdisk"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "MOVE YOUR WHEEL!"
+msgstr "Đ ŃƒŃˆŃ†Đ” ĐșĐŸĐ»Đ°ĐŒ ĐŒŃ‹ŃˆŃ‹!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgid "sent: "
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Default printer"
-msgstr "ЛаĐșĐ°Đ»ŃŒĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
+msgid "Automatic IP"
+msgstr "ĐŃžŃ‚Đ°ĐŒĐ°Ń‚Ń‹Ń‡ĐœŃ‹ IP"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Set this printer as the default"
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+" Note that two different options are available after clicking the button:\n"
+"\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Printer options"
-msgstr "Опцыi ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer manufacturer, model"
-msgstr ""
+#, fuzzy, c-format
+msgid "Configuration of a remote printer"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer manufacturer, model, driver"
+msgid "Moldova"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Чытаю базу ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń… ЮраĐčĐČĐ”Ń€ĐŸŃž CUPS"
+msgid "Please check if you want to erase your tape before the backup."
+msgstr "Выбар паĐșДтаў ĐŽĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer name, description, location"
-msgstr "Đ—Đ»ŃƒŃ‡ŃĐœĐœĐ” ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#, c-format
+msgid "An online platform to respond to enterprise support needs."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "Printer connection type"
-msgstr "ĐĄŃƒĐŒĐ”ŃĐœĐ°Đ” IĐœŃ‚ŃŃ€ĐœŃŃ‚-Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ”"
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "Proxy паĐČiĐœĐ”Đœ Đ±Ń‹Ń†ŃŒ http://..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Raw printer"
+msgid "Add a new rule at the end"
msgstr "IĐŒŃ ЮруĐșарĐși"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do it!"
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Close"
-msgstr "ĐŸĐŸŃ€Ń‚ ĐŒŃ‹ŃˆŃ‹"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../modules/interactive.pm:1
+#, c-format
msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "ĐŠi жаЎаДцД пратэсцiраĐČаць ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐși?"
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
+msgstr ""
+"Вы ĐœĐ” ĐŒĐŸĐ¶Đ°Ń†Đ” Đ·Đ°ĐŽĐ°Ń†ŃŒ ĐŸĐżŃ†Ń‹i ĐŒĐŸĐŽŃƒĐ»ŃŽ %s.\n"
+"Опцыi - у Ń„Đ°Ń€ĐŒĐ°Ń†Đ” ``iĐŒŃ=Đ·ĐœĐ°Ń‡ŃĐœĐœĐ” iĐŒŃ2=Đ·ĐœĐ°Ń‡ŃĐœĐœĐ”2 ...''.\n"
+"НапрыĐșлаЎ, ``io=0x300 irq=7''"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Modify printer configuration"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ Đ· IĐœŃ‚ŃŃ€ĐœŃŃ‚Đ°ĐŒ"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Quit without writing the partition table?"
+msgstr "ВыĐčсцi бДз Đ·Đ°Đżiсу таблiцы разЎзДлаў"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Add a new printer"
-msgstr "IĐŒŃ ЮруĐșарĐși"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+#: ../../standalone.pm:1
#, fuzzy, c-format
-msgid "Normal Mode"
-msgstr "ЗĐČычаĐčĐœŃ‹"
+msgid "Installing packages..."
+msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” паĐșĐ”Ń‚Ńƒ %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dutch"
+msgstr "Đ“Đ°Đ»Đ°ĐœĐŽŃĐși"
+
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Change the printing system"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° сДтĐși"
+msgid "The following packages need to be installed:\n"
+msgstr "ĐĐ°ŃŃ‚ŃƒĐżĐœŃ‹Ń паĐșДты Đ±ŃƒĐŽŃƒŃ†ŃŒ ĐŽĐ°ĐŽĐ°ĐœŃ‹ ĐŽĐ° сiŃŃ‚ŃĐŒŃ‹"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Angola"
+msgstr ""
+
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "CUPS configuration"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ°"
+msgid "service setting"
+msgstr "прылаЎа"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgid "Custom"
+msgstr "Па ĐČŃ‹Đ±Đ°Ń€Ńƒ"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "File is already used by another loopback, choose another one"
msgstr ""
+"ЀаĐčĐ» ŃƒĐ¶ĐŸ ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаДцца iĐœŃˆĐ°Đč ĐČiŃ€Ń‚ŃƒĐ°Đ»ŃŒĐœĐ°Đč сiŃŃ‚ŃĐŒĐ°Đč. Калi ласĐșĐ°, \n"
+"Đ°Đ±ŃŃ€Ń‹Ń†Đ” iĐœŃˆŃƒŃŽ ĐœĐ°Đ·ĐČу"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Display all available remote CUPS printers"
+msgid "Read-only"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"бут Đ·ĐŒŃŃˆŃ‡Đ°ŃŽŃ†Ń†Đ° чэргi ЮруĐșу.\n"
-"Вы ĐŒĐŸĐ¶Đ°Ń†Đ” ЮаЮаць яшчэ, Đ°Đ»ŃŒĐ±ĐŸ Đ·ĐŒŃĐœiць iŃĐœŃƒŃŽŃ‡Ń‹Ń."
+msgid "Latvia"
+msgstr "Đ Đ°Đ·ĐŒĐ”Ń€ĐșĐ°ĐČĐ°ĐœĐœĐ”"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Printing system: "
+msgid "No known driver"
msgstr ""
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "1 MB"
+msgstr "1 ĐœĐ±"
+
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Checking installed software..."
+msgid ""
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing Foomatic..."
-msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” паĐșĐ”Ń‚Ńƒ %s"
+#: ../../standalone/draksound:1
+#, c-format
+msgid ""
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
+msgid "Configure Local Area Network..."
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° лаĐșĐ°Đ»ŃŒĐœĐ°Đč сДтĐși"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
+#: ../../services.pm:1
+#, c-format
+msgid "Launch the sound system on your machine"
+msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Reading printer data..."
+msgid "Preparing printer database..."
msgstr "Чытаю базу ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń… ЮраĐčĐČĐ”Ń€ĐŸŃž CUPS"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "ĐŻĐșую сiŃŃ‚ŃĐŒŃƒ ЮруĐșу Вы жаЎаДцД ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць?"
+msgid "Information"
+msgstr "IĐœŃ„Đ°Ń€ĐŒĐ°Ń†Ń‹Ń"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
#, fuzzy, c-format
-msgid "Select Printer Spooler"
-msgstr "Выбар тыпу Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
+msgid "No network card"
+msgstr "сДтĐșĐ°ĐČая Đșарта ĐœĐ” Đ·ĐœĐŸĐčĐŽĐ·Đ”ĐœĐ°"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, fuzzy, c-format
-msgid "Setting Default Printer..."
-msgstr "ЛаĐșĐ°Đ»ŃŒĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
+msgid "Which filesystem do you want?"
+msgstr "ĐŻĐșую сiŃŃ‚ŃĐŒŃƒ ЮруĐșу Вы жаЎаДцД ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць?"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing %s ..."
-msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” паĐșĐ”Ń‚Ńƒ %s"
+#: ../../mouse.pm:1
+#, c-format
+msgid "3 buttons"
+msgstr "3 ĐșĐœĐŸĐżĐși"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Removing %s ..."
-msgstr "ĐŸĐ°ĐŒĐ”Ń€Ń‹ эĐșŃ€Đ°ĐœŃƒ: %s\n"
+msgid "Detailed information"
+msgstr "IĐœŃ„Đ°Ń€ĐŒĐ°Ń†Ń‹Ń"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
+msgid "Malta"
msgstr ""
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Starting the printing system at boot time"
-msgstr "ĐŻĐșую сiŃŃ‚ŃĐŒŃƒ ЮруĐșу Вы жаЎаДцД ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць?"
-
-#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
+"Printer default settings\n"
"\n"
-"Do you really want to configure printing on this machine?"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Installing a printing system in the %s security level"
+msgid "This floppy is not FAT formatted"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "paranoid"
-msgstr "ĐŸĐ°Ń€Đ°ĐœĐ°iĐŽĐ°Đ»ŃŒĐœŃ‹"
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, c-format
+msgid "Configuring network"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° сДтĐși"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
#, fuzzy, c-format
-msgid "high"
-msgstr "Đ’Ń‹ŃĐŸĐși"
+msgid "Graphic Card"
+msgstr "ВiЮэаĐșарта"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Restarting printing system..."
-msgstr "ĐŻĐșую сiŃŃ‚ŃĐŒŃƒ ЮруĐșу Вы жаЎаДцД ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць?"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Resizing Windows partition"
+msgstr "Đ’Ń‹Đ»iŃ‡ŃĐœĐœĐ” ĐŒĐ”Đ¶Đ°Ńž фаĐčлаĐČĐ°Đč сiŃŃ‚ŃĐŒŃ‹ Windows"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Configuration of a remote printer"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
+msgid "Provider dns 1 (optional)"
+msgstr "DNS 1 праĐČĐ°ĐčЮару"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
+msgid "Cameroon"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
msgstr ""
+"Вы ĐŒĐŸĐ¶Đ°Ń†Đ” Ń†ŃĐżĐ”Ń€ разбiць ĐČаш ЮысĐș %s\n"
+"Па Đ·Đ°ĐșĐ°ĐœŃ‡ŃĐœĐœi ĐœĐ” Đ·Đ°Đ±ŃƒĐŽĐ·ŃŒŃ†Đ”ŃŃ Đ·Đ°Ń…Đ°ĐČаць Đ·ĐŒŃĐœĐ”ĐœĐœi, сĐșарыстаўшы `w'"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configure the network now"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° сДтĐși"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Go on without configuring the network"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° сДтĐși"
+msgid "Close"
+msgstr "ĐŸĐŸŃ€Ń‚ ĐŒŃ‹ŃˆŃ‹"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Network functionality not configured"
-msgstr "ĐœĐ°ĐœiŃ‚ĐŸŃ€ паĐșŃƒĐ»ŃŒ ĐœĐ” ĐœĐ°ŃŃ‚Ń€ĐŸĐ”ĐœŃ‹"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Starting network..."
-msgstr "ĐŻĐși тып ĐČашага ISDN Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ?"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Refreshing printer data..."
-msgstr "Чытаю базу ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń… ЮраĐčĐČĐ”Ń€ĐŸŃž CUPS"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Calendar"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
+"Restore Selected\n"
+"Catalog Entry"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Transfer printer configuration"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ Đ· IĐœŃ‚ŃŃ€ĐœŃŃ‚Đ°ĐŒ"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Transferring %s..."
+msgid ""
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
msgstr ""
+"Đ”Đ»Ń ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐși Đ°ĐŽĐŽĐ°Đ»Đ”ĐœĐ°Đč чаргi ЮруĐșу ĐČĐ°ĐŒ ĐżĐ°Ń‚Ń€ŃĐ±ĐœĐ°\n"
+"ĐżĐ°Đ·ĐœĐ°Ń‡Ń‹Ń†ŃŒ iĐŒŃ Đ°ĐŽĐŽĐ°Đ»Đ”ĐœĐ°ĐłĐ° сДрĐČДра i iĐŒŃ чаргi ЮруĐșу,\n"
+"у яĐșую Đ°ĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ сДрĐČДр буЎзД Đ°ĐŽĐżŃ€Đ°ŃžĐ»ŃŃ†ŃŒ Đ·Đ°ĐŽĐ°ĐœĐœi."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "New printer name"
-msgstr "IĐŒŃ ЮруĐșарĐși"
+msgid "Iceland"
+msgstr "IŃĐ»Đ°ĐœĐŽŃĐși"
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
+msgid "consolehelper missing"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "stopped"
+msgstr "Đ”Đ°Đ»ŃƒŃ‡Ń‹Ń†ŃŒ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Transfer"
+msgid "Whether the FPU has an irq vector"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
+msgid "Ext2"
+msgstr "Ext2"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Do not transfer printers"
-msgstr ""
+msgid "Expand Tree"
+msgstr "Đ Đ°Đ·ĐłĐ°Ń€ĐœŃƒŃ†ŃŒ ЮрэĐČĐ°"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
+"The old \"%s\" driver is blacklisted.\n"
"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
+"It has been reported to oops the kernel on unloading.\n"
"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
+"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#, fuzzy, c-format
+msgid "Expert Mode"
+msgstr "Đ­ĐșспДрт"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
+msgid "Printer options"
+msgstr "Опцыi ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Local Network adress"
+msgstr "сДтĐșĐ°ĐČая Đșарта ĐœĐ” Đ·ĐœĐŸĐčĐŽĐ·Đ”ĐœĐ°"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup your System files. (/etc directory)"
+msgstr "Đ”Ń€ŃĐœĐœŃ‹ фаĐčĐ» Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČĐ°Đč ĐșĐŸĐżii"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
+"\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
+"\n"
+"Do you want to install the updates ?"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Samba Server"
+msgstr "NIS сДрĐČДр:"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
+"Arguments: (arg, alert=1)\n"
+"\n"
+"Enable/Disable IP spoofing protection."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
+msgid "Australian Optus cable TV"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
msgstr ""
+" <Tab>/<Alt-Tab> ĐżĐ°ĐŒiж ŃĐ»Đ”ĐŒĐ”ĐœŃ‚Đ°ĐŒi | <Space> ĐČыбар | <F12> ĐœĐ°ŃŃ‚ŃƒĐżĐœŃ‹ эĐșŃ€Đ°Đœ "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Printing test page(s)..."
-msgstr "ДруĐș тэстаĐČых ŃŃ‚Đ°Ń€ĐŸĐœĐ°Đș"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Print option list"
-msgstr "Опцыi ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
+msgid "Subnet:"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "ĐĐŽĐ»ŃƒŃ‡ŃĐœĐœĐ” Đ°ĐŽ сДтĐși"
+msgid "Zimbabwe"
+msgstr "ĐŒĐŸĐ¶Đ° Đ±Ń‹Ń†ŃŒ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "ĐĐŽĐ»ŃƒŃ‡ŃĐœĐœĐ” Đ°ĐŽ сДтĐși"
+msgid "Please enter the host name or IP."
+msgstr "Калі ласĐșĐ°, зрабіцД ĐœĐ”ĐșĐ°Đ»ŃŒĐșі рухаў ĐŒŃ‹ŃˆŃˆŃƒ."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "ĐĐŽĐ»ŃƒŃ‡ŃĐœĐœĐ” Đ°ĐŽ сДтĐși"
+msgid "When"
+msgstr "З ĐșĐŸĐ»Đ°ĐŒ"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "ĐĐŽĐ»ŃƒŃ‡ŃĐœĐœĐ” Đ°ĐŽ сДтĐși"
+msgid "Second DNS Server (optional)"
+msgstr "Другi сДрĐČДр DNS:"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
+msgid "Finland"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
+msgid "Color depth: %s\n"
+msgstr "ĐŸĐ°Ń€Đ°ĐŒĐ”Ń‚Ń€Ń‹ глыбiĐœi ĐșĐŸĐ»Đ”Ń€Ńƒ: %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "Вы ĐœĐ” ĐŒĐŸĐ¶Đ°Ń†Đ” Đ°ĐŽĐŒŃĐœiць ĐČŃ‹Đ»ŃƒŃ‡ŃĐœĐœĐ” гэтага паĐșĐ”Ń‚Ńƒ. ĐŻĐłĐŸ ĐżĐ°Ń‚Ń€ŃĐ±ĐœĐ° Đ°Đ±ĐœĐ°ĐČiць"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Loading from floppy"
+msgstr "ĐĐŽĐœĐ°ŃžĐ»Đ”ĐœĐœĐ” Đ· ЮысĐșДты"
+
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Slovenia"
+msgstr "ХлаĐČĐ”ĐœŃĐși"
+
+#: ../../any.pm:1
#, c-format
msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
+"Enter a user\n"
+"%s"
msgstr ""
+"ĐŁĐČŃĐŽĐ·iцД iĐŒŃ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșу\n"
+"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "ProgressBar color selection"
+msgstr "Đ—Đ»ŃƒŃ‡ŃĐœĐœĐ” ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
+
+#: ../../any.pm:1
#, c-format
msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
msgstr ""
+"ĐŁ ĐŒĐ”ĐœŃŽ ĐŒĐ°ŃŽŃ†Ń†Đ° ĐœĐ°ŃŃ‚ŃƒĐżĐœŃ‹Ń ĐżŃƒĐœĐșты.\n"
+"Вы ĐŒĐŸĐ¶Đ°Ń†Đ” ЮаЮаць яшчэ, Đ°Đ»ŃŒĐ±ĐŸ Đ·ĐŒŃĐœiць iŃĐœŃƒŃŽŃ‡Ń‹Ń."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
+#, c-format
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
msgstr ""
+"ĐšĐ°ĐŒĐ°ĐœĐŽŃ‹, яĐșiя ĐČыĐșĐŸĐœĐČаюцца, фiĐșсуюцца па ĐșĐ°ĐŒĐ°ĐœĐŽĐ·Đ” i часД ŃĐ” ĐČыĐșĐ°ĐœĐ°ĐœĐœŃ\n"
+"i ĐČыĐșĐŸĐœĐČаюцца групы ĐșĐ°ĐŒĐ°ĐœĐŽ, ĐșĐ°Đ»i Đ·Đ°ĐłŃ€ŃƒĐ·ĐșĐ° ĐżĐ°ĐŒŃŃ†i ĐœiĐ¶ŃĐč ЮастатĐșĐŸĐČĐ°Đč."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Did it work properly?"
+msgid "Radio support:"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"бэстаĐČыя ŃŃ‚Đ°Ń€ĐŸĐœĐși Đ°ĐŽĐżŃ€Đ°ŃžĐ»Đ”ĐœŃ‹ ĐŽŃĐŒĐ°ĐœŃƒ ЮруĐșу.\n"
-"ĐŸĐ”Ń€Đ°ĐŽ Ń‚Ń‹ĐŒ, яĐș ĐżŃ€Ń‹ĐœŃ‚ŃŃ€ Đ·Đ°ĐżŃ€Đ°Ń†ŃƒĐ”, ĐŒĐŸĐ¶Đ° праĐčсцi ĐżŃŃžĐœŃ‹ час.\n"
-"ĐĐœ ĐżŃ€Đ°Ń†ŃƒĐ” ĐœĐ°Ń€ĐŒĐ°Đ»ŃŒĐœĐ°?"
+msgid "Installing SANE packages..."
+msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” паĐșĐ”Ń‚Ńƒ %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
+msgid "boot disk creation"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ĐżĐ°ŃĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "LDAP"
msgstr ""
-"бэстаĐČыя ŃŃ‚Đ°Ń€ĐŸĐœĐși Đ°ĐŽĐżŃ€Đ°ŃžĐ»Đ”ĐœŃ‹ ĐŽŃĐŒĐ°ĐœŃƒ ЮруĐșу.\n"
-"ĐŸĐ”Ń€Đ°ĐŽ Ń‚Ń‹ĐŒ, яĐș ĐżŃ€Ń‹ĐœŃ‚ŃŃ€ Đ·Đ°ĐżŃ€Đ°Ń†ŃƒĐ”, ĐŒĐŸĐ¶Đ° праĐčсцi ĐżŃŃžĐœŃ‹ час.\n"
-"Статус ЮруĐșу:\n"
-"%s\n"
-"\n"
-"ĐĐœ ĐżŃ€Đ°Ń†ŃƒĐ” ĐœĐ°Ń€ĐŒĐ°Đ»ŃŒĐœĐ°?"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do not print any test page"
-msgstr "ДруĐș тэстаĐČых ŃŃ‚Đ°Ń€ĐŸĐœĐ°Đș"
+#: ../../bootloader.pm:1
+#, c-format
+msgid "SILO"
+msgstr "SILO"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
#, fuzzy, c-format
-msgid "Photo test page"
-msgstr "ДруĐș тэстаĐČых ŃŃ‚Đ°Ń€ĐŸĐœĐ°Đș"
+msgid "Change type"
+msgstr "Đ—ĐŒŃĐœiць тып Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Alternative test page (A4)"
-msgstr "ДруĐș тэстаĐČых ŃŃ‚Đ°Ń€ĐŸĐœĐ°Đș"
+#: ../../any.pm:1
+#, c-format
+msgid "SILO Installation"
+msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” SILO"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Alternative test page (Letter)"
+msgid "Use CD/DVDROM to backup"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Standard test page"
-msgstr "ĐĄŃ‚Đ°ĐœĐŽĐ°Ń€Ń‚ĐœŃ‹"
+#: ../../install_messages.pm:1
+#, c-format
+msgid ""
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
+"\n"
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
+msgstr ""
+"ВiĐœŃˆŃƒĐ”ĐŒ, ŃƒŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” Đ·Đ°ĐČĐ”Ń€ŃˆĐ°ĐœĐ°.\n"
+"Đ’Ń‹ĐŽĐ°Đ»iцД Đ·Đ°ĐłŃ€ŃƒĐ·Đ°Ń‡ĐœŃ‹ ЮысĐș i ĐœĐ°Ń†iŃĐœiцД enter ĐŽĐ»Ń ĐżĐ”Ń€Đ°Đ·Đ°ĐłŃ€ŃƒĐ·Đși.\n"
+"\n"
+"\n"
+"За iĐœŃ„Đ°Ń€ĐŒĐ°Ń†Ń‹ŃĐč пра Đ·ĐŒŃĐœĐ”ĐœĐœi ĐŽĐ°ĐŽĐ·Đ”ĐœĐ°ĐłĐ° ĐČыпусĐșу Mandrake Linux,\n"
+"Đ·ĐČяртаĐčŃ†Đ”ŃŃŒ ĐœĐ° \n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"IĐœŃ„Đ°Ń€ĐŒĐ°Ń†Ń‹Ń па ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ” ĐČашаĐč сiŃŃ‚ŃĐŒŃ‹ ёсть ў ĐżĐ°ŃĐ»Ń-ўсталёĐČĐ°Ń‡ĐœĐ°Đč\n"
+"глаĐČĐ” ĐČашага Đ”Đ°ĐżĐ°ĐŒĐŸĐ¶ĐœiĐșĐ° ĐšĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșу Đ· АфiцыĐčĐœĐ°ĐłĐ° Mandrake Linux."
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Print"
-msgstr "ĐŸŃ€Ń‹ĐœŃ‚ŃŃ€"
+msgid "paranoid"
+msgstr "ĐŸĐ°Ń€Đ°ĐœĐ°iĐŽĐ°Đ»ŃŒĐœŃ‹"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "No test pages"
-msgstr "йаĐș, ĐœĐ°ĐŽŃ€ŃƒĐșĐ°ĐČаць абДЎзĐČĐ” ŃŃ‚Đ°Ń€ĐŸĐœĐși тэĐșсту"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Send mail report after each backup to:"
+msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
+"This command you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications. But here do not supply the file name "
+"because the file to print is provided by the application.\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Test pages"
-msgstr "ПраĐČДрĐșĐ° ĐżĐ°Ń€Ń‚ĐŸŃž"
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolution"
+msgstr "ĐŸĐ°ĐŒĐ”Ń€Ń‹ эĐșŃ€Đ°ĐœŃƒ"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "ЖаЎаДцД пратэсцiраĐČаць ЮруĐș?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Option %s out of range!"
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
msgstr ""
+"Đ”Đ»Ń ЮруĐșу ĐœĐ° ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ń‹ SMB ĐœĐ”Đ°Đ±Ń…ĐŸĐŽĐœĐ° ĐżĐ°Đ·ĐœĐ°Ń‡Ń‹Ń†ŃŒ iĐŒŃ Ń…ĐŸŃŃ‚Ńƒ SMB (ĐœĐ” заўсёЎы "
+"супаЎаД Đ· iĐŒĐ”ĐœĐ”ĐŒ у сДтцы TCP/IP) i аЮрас IP сДрĐČДра ЮруĐșу, Đ° таĐșŃĐ°ĐŒĐ° iĐŒŃ "
+"рэсурсу, яĐși ŃĐżĐ°Đ»ŃƒŃ‡Đ°ĐœŃ‹ Đ· ĐČŃ‹Đ±Ń€Đ°ĐœŃ‹ĐŒ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Đ°ĐŒ, iĐŒŃ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșу, ĐżĐ°Ń€ĐŸĐ»ŃŒ i "
+"iĐœŃ„Đ°Ń€ĐŒĐ°Ń†Ń‹ŃŽ аб ĐżŃ€Đ°Ń†ĐŸŃžĐœĐ°Đč ĐłŃ€ŃƒĐżĐ”."
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Option %s must be a number!"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse icmp echo."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "reconfigure"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° X Window"
+
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Option %s must be an integer number!"
+msgid ""
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
+"Ваша ĐČiЮэаĐșарта ĐŒĐŸĐ¶Đ° ĐŒĐ”Ń†ŃŒ 3D-пасĐșĐ°Ń€ŃĐœĐœĐ”, яĐșĐŸĐ” ĐżĐ°ĐŽŃ‚Ń€Ń‹ĐŒĐ»iĐČаДцца Ń‚ĐŸĐ»ŃŒĐși XFree %"
+"s.\n"
+"МАЙЩЕ НА ЎВАЗЕ, йбО ГЭбА Đ­ĐšĐĄĐŸĐ•Đ Đ«ĐœĐ•ĐĐąĐĐ›ĐŹĐĐĐŻ ĐŸĐĐ”ĐąĐ Đ«ĐœĐšĐ I МОЖА ĐŸĐ Đ«Đ’Đ•ĐĄĐŠI ДА\n"
+"ЗАВIСАННЯ ВАйАГА КАМП'мбЭРУ."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Printer default settings"
-msgstr "Đ—Đ»ŃƒŃ‡ŃĐœĐœĐ” ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
+msgid "Xinetd Service"
+msgstr "ХДрĐČДр ЮруĐșу"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
+msgid "access to network tools"
msgstr ""
#: ../../printer/printerdrake.pm:1
@@ -10193,554 +9982,551 @@ msgstr ""
msgid "Firmware-Upload for HP LaserJet 1000"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
msgstr ""
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ Đ· IĐœŃ‚ŃŃ€ĐœŃŃ‚Đ°ĐŒ"
+#, c-format
+msgid "Here is a list of all auto-detected printers. "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
msgstr ""
+"ĐŸĐ°ĐŒŃ‹Đ»ĐșĐ° ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ Đ°boot, \n"
+"спрабаĐČаць ŃƒŃŃ‚Đ°Đ»Ń‘ŃžĐČаць, ĐœĐ”ĐłĐ»Đ”ĐŽĐ·ŃŃ‡Ń‹ ĐœĐ° ĐŒĐ°ĐłŃ‡Ń‹ĐŒĐ°ŃŃ†ŃŒ ĐżĐ°Ń€ŃƒŃˆŃĐœĐœŃ ĐżĐ”Ń€ŃˆĐ°ĐłĐ° Ń€Đ°Đ·ĐŽĐ”Đ»Ńƒ?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+"Options Description:\n"
+"\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
+"\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "OKI winprinter configuration"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ Đ· IĐœŃ‚ŃŃ€ĐœŃŃ‚Đ°ĐŒ"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
+"Restore Selected\n"
+"Files"
+msgstr "Đ’Ń‹ĐŽĐ°Đ»iць чаргу ЮруĐșу"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
+"%s exists, delete?\n"
"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Which printer model do you have?"
-msgstr "ĐŻĐși тып ЮруĐșарĐși ĐČы ĐŒĐ°Đ”Ń†Đ”?"
+#: ../../network/tools.pm:1
+#, c-format
+msgid "Please fill or check the field below"
+msgstr "Калi ласĐșĐ°, Đ·Đ°ĐżĐŸŃžĐœiцД цi ĐżĐ°Đ·ĐœĐ°Ń‡Ń†Đ” ĐżĐŸĐ»Đ” ĐœiĐ¶ŃĐč"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Printer model selection"
-msgstr "Đ—Đ»ŃƒŃ‡ŃĐœĐœĐ” ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "ĐŠi жаЎаДцД пратэсцiраĐČаць ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐși?"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Reading printer database..."
-msgstr "Чытаю базу ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń… ЮраĐčĐČĐ”Ń€ĐŸŃž CUPS"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Boot Protocol"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Select model manually"
-msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "LVM-disks %s\n"
+msgstr "LVM-ЮысĐși %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "The model is correct"
-msgstr "Гэта ĐŽĐ°ĐșĐ»Đ°ĐŽĐœĐ°?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
+msgid "The package %s is needed. Install it?"
+msgstr "Выбар паĐșДтаў ĐŽĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, fuzzy, c-format
-msgid "Your printer model"
-msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
+msgid "On boot"
+msgstr "Yaboot"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Preparing printer database..."
-msgstr "Чытаю базу ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń… ЮраĐčĐČĐ”Ń€ĐŸŃž CUPS"
+msgid "Bus identification"
+msgstr "ĐŃžŃ‚ŃĐœŃ‚Ń‹Ń„iĐșацыя"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Location"
-msgstr "Đ Đ°Đ·ĐŒĐ”Ń€ĐșĐ°ĐČĐ°ĐœĐœĐ”"
+msgid "Please make a backup of your data first"
+msgstr "Па-ĐżĐ”Ń€ŃˆĐ°Đ”, зрабiцД Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČую ĐșĐŸĐżiю ĐČашых ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń…"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Description"
-msgstr "АпiŃĐ°ĐœĐœĐ”"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Vatican"
+msgstr "Đ Đ°Đ·ĐŒĐ”Ń€ĐșĐ°ĐČĐ°ĐœĐœĐ”"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Name of printer"
-msgstr "IĐŒŃ ЮруĐșарĐși"
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr "На яĐși Đ· ĐŒĐ°ŃŽŃ‡Ń‹Ń…ŃŃ Đ¶ĐŸŃ€ŃŃ‚Đșiх ЮысĐșаў Вы жаЎаДцД ŃžŃŃ‚Đ°Đ»ŃĐČаць Linux?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
+msgid "Boot ISO"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Eritrea"
+msgstr "Đ­ĐșспДрт"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Remove List"
+msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
-msgid "Checking device and configuring HPOJ..."
+msgid "A customizable environment"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Photo memory card access on your HP multi-function device"
+msgid "Inuktitut"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Scanning on your HP multi-function device"
+msgid "Morocco"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Installing mtools packages..."
-msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” паĐșĐ”Ń‚Ńƒ %s"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing SANE packages..."
-msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” паĐșĐ”Ń‚Ńƒ %s"
+msgid "Which printer model do you have?"
+msgstr "ĐŻĐși тып ЮруĐșарĐși ĐČы ĐŒĐ°Đ”Ń†Đ”?"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Installing HPOJ package..."
-msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” паĐșĐ”Ń‚Ńƒ %s"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
+msgid "Add a new printer"
+msgstr "IĐŒŃ ЮруĐșарĐși"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A command line must be entered!"
+msgid " All of your selected data have been "
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Command line"
-msgstr "IĐŒŃ ĐŽĐ°ĐŒĐ”ĐœŃƒ"
+msgid "<-- Delete"
+msgstr "Đ—Đœiшчыць"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
+msgid "Nepal"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Pipe into command"
+msgid "cpu # "
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Detected model: %s %s"
-msgstr "Đ”ŃƒĐ±Đ»ŃĐČĐ°ĐœĐœĐ” ĐżŃƒĐœĐșту ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ %s"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "chunk size"
+msgstr "ĐżĐ°ĐŒĐ”Ń€ Đ±Đ»ĐŸĐșу"
-#: ../../printer/printerdrake.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "A valid URI must be entered!"
-msgstr ""
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "commands before booting, or 'c' for a command-line."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Printer Device URI"
-msgstr "URI ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
+msgid "Problems installing package %s"
+msgstr "ĐŸŃ€Đ°Đ±Đ»Đ”ĐŒŃ‹ Đ· ŃƒŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ”ĐŒ паĐșĐ”Ń‚Ńƒ %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "You will receive an alert if the load is higher than this value"
+msgstr ""
+
+#: ../../standalone/drakbug:1
#, c-format
msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Port"
-msgstr "ĐŸĐŸŃ€Ń‚"
+msgid "Add a scanner manually"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Printer host name or IP"
-msgstr "IĐŒŃ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
+msgid "Reload partition table"
+msgstr "ДаЮатĐșĐŸĐČая таблiца разЎзДлаў"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "The port number should be an integer!"
+msgid "Yes, I want autologin with this (user, desktop)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Search for fonts in installed list"
+msgstr ""
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Printer host name or IP missing!"
-msgstr "IĐŒŃ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
+msgid "Boot"
+msgstr "Root"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, fuzzy, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"Каб ЮруĐșĐ°ĐČаць праз ŃĐŸĐșДт ЮруĐșарĐși, ĐČĐ°ĐŒ ĐœĐ”Đ°Đ±Ń…ĐŸĐŽĐœĐ° Đ·Đ°Đ±ŃŃĐżĐ”Ń‡Ń‹Ń†ŃŒ\n"
-"iĐŒŃ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ i ĐŒĐ°ĐłŃ‡Ń‹ĐŒĐ° ŃĐłĐŸ ĐœŃƒĐŒĐ°Ń€ ĐżĐŸŃ€Ń‚Ńƒ."
+msgid "Tuner type:"
+msgstr "Đ—ĐŒŃĐœiць тып Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "Опцыi ŃĐŸĐșĐ”Ń‚Ńƒ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Host \"%s\", port %s"
+msgid "\"Menu\" key"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ", host \"%s\", port %s"
+msgid ""
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "Scanning network..."
-msgstr "ĐŻĐși тып ĐČашага ISDN Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ?"
+msgid "Security Administrator:"
+msgstr "Опцыi Đ°ĐŽĐŽĐ°Đ»Đ”ĐœĐ°ĐłĐ° ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ lpd"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Printer auto-detection"
-msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
+msgid "Please enter your login"
+msgstr "ĐŸĐ°ŃĐżŃ€Đ°Đ±ŃƒĐčцД яшчэ раз"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "NCP queue name missing!"
+msgid "if set to yes, check permissions of files in the users' home."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "NCP server name missing!"
+msgid ""
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Print Queue Name"
-msgstr "IĐŒŃ чаргi ЮруĐșу"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer Server"
-msgstr "ХДрĐČДр ЮруĐșу"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Đ”Đ»Ń ЮруĐșу ĐœĐ° ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ń‹ NetWare ĐœĐ”Đ°Đ±Ń…ĐŸĐŽĐœĐ° ĐżĐ°Đ·ĐœĐ°Ń‡Ń‹Ń†ŃŒ iĐŒŃ сДрĐČĐ”Ń€Ńƒ ЮруĐșу NetWare "
-"(ĐœĐ” заўсёЎы супаЎаД Đ· iĐŒĐ”ĐœĐ”ĐŒ у сДтцы TCP/IP) i iĐŒŃ чаргi ЮруĐșу, яĐșая "
-"аЎпаĐČŃĐŽĐ°Đ” Đ°Đ±Ń€Đ°ĐœĐ°ĐŒŃƒ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ, Đ° таĐșŃĐ°ĐŒĐ° iĐŒŃ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșу i ĐżĐ°Ń€ĐŸĐ»ŃŒ."
+msgid "Fonts copy"
+msgstr "Đ€Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČаць ЮысĐșĐ”Ń‚Ńƒ"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "NetWare Printer Options"
-msgstr "Опцыi ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ NetWare"
+msgid "Automated"
+msgstr "ĐŃžŃ‚Đ°ĐŒĐ°Ń‚Ń‹Ń‡ĐœŃ‹"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
+msgid "Do you want to test the configuration?"
+msgstr "ĐŠi жаЎаДцД пратэсцiраĐČаць ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐși?"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+" to the Internet as a client.\n"
"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
+"High: There are already some restrictions, and more automatic checks "
+"are run every night.\n"
"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
+"Higher: The security is now high enough to use the system as a server "
+"which can accept\n"
+" connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+" should choose a lower level.\n"
"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
+"Paranoid: This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+" features are at their maximum\n"
"\n"
+"Security Administrator:\n"
+" If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+" email)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SECURITY WARNING!"
-msgstr ""
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Save packages selection"
+msgstr "Асабiсты ĐČыбар паĐșДтаў"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Remove the last item"
+msgstr "Đ€Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœĐ” ĐČiŃ€Ń‚ŃƒĐ°Đ»ŃŒĐœĐ°ĐłĐ° Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ %s"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Samba share name missing!"
+msgid "User list to restore (only the most recent date per user is important)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Either the server name or the server's IP must be given!"
+msgid "No net boot images created!"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, fuzzy, c-format
-msgid "Auto-detected"
-msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
+msgid "use pptp"
+msgstr "ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць pppoe"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Workgroup"
-msgstr "ĐŸŃ€Đ°Ń†ĐŸŃžĐœĐ°Ń група"
+msgid "Choose which services should be automatically started at boot time"
+msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ”, яĐșiя сДрĐČiсы запусĐșаць Đ°ŃžŃ‚Đ°ĐŒĐ°Ń‚Ń‹Ń‡ĐœĐ° пры Đ·Đ°ĐłŃ€ŃƒĐ·Ń†Ń‹"
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Share name"
-msgstr "IĐŒŃ ĐŽĐ»Ń Ń€Đ°Đ·ĐŒĐ”Ń€ĐșĐ°ĐČĐ°ĐœĐ°ĐłĐ° рэсурсу"
+#, fuzzy, c-format
+msgid "Learn how to use this printer"
+msgstr "ĐŠi жаЎаДцД пратэсцiраĐČаць ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐși?"
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB server IP"
-msgstr "IP сДрĐČДра SMB"
+#, fuzzy, c-format
+msgid "Configure the network now"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° сДтĐși"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "SMB server host"
-msgstr "IĐŒŃ сДрĐČĐ”Ń€Ńƒ SMB"
+msgid "Choose a mirror from which to get the packages"
+msgstr "Выбар люстра ĐŽĐ»Ń Đ°Ń‚Ń€Ń‹ĐŒĐ°ĐœĐœŃ паĐșДтаў"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
msgstr ""
-"Đ”Đ»Ń ЮруĐșу ĐœĐ° ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ń‹ SMB ĐœĐ”Đ°Đ±Ń…ĐŸĐŽĐœĐ° ĐżĐ°Đ·ĐœĐ°Ń‡Ń‹Ń†ŃŒ iĐŒŃ Ń…ĐŸŃŃ‚Ńƒ SMB (ĐœĐ” заўсёЎы "
-"супаЎаД Đ· iĐŒĐ”ĐœĐ”ĐŒ у сДтцы TCP/IP) i аЮрас IP сДрĐČДра ЮруĐșу, Đ° таĐșŃĐ°ĐŒĐ° iĐŒŃ "
-"рэсурсу, яĐși ŃĐżĐ°Đ»ŃƒŃ‡Đ°ĐœŃ‹ Đ· ĐČŃ‹Đ±Ń€Đ°ĐœŃ‹ĐŒ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Đ°ĐŒ, iĐŒŃ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșу, ĐżĐ°Ń€ĐŸĐ»ŃŒ i "
-"iĐœŃ„Đ°Ń€ĐŒĐ°Ń†Ń‹ŃŽ аб ĐżŃ€Đ°Ń†ĐŸŃžĐœĐ°Đč ĐłŃ€ŃƒĐżĐ”."
+"ĐŁ ĐżŃ€Đ°ĐłŃ€Đ°ĐŒŃ‹ Đ·ĐŒĐ”ĐœŃ‹ ĐżĐ°ĐŒĐ”Ń€Đ°Ńž разЎзДла FAT ĐœĐ” Đ°Ń‚Ń€Ń‹ĐŒĐ°Đ»Đ°ŃŃ\n"
+"апрацаĐČаць Ваш разЎзДл, ĐżĐ°ĐŒŃ‹Đ»ĐșĐ°: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Опцыi ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ SMB (Windows 9x/NT)"
+msgid "Which sector do you want to move it to?"
+msgstr "На яĐși сДĐșтар ĐżĐ”Ń€Đ°ĐœĐ”ŃŃ†Ń–?"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, fuzzy, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "ĐĐŽĐ»ŃƒŃ‡ŃĐœĐœĐ” Đ°ĐŽ сДтĐși"
+msgid "Do you want to click on this button?"
+msgstr "Вы жаЎаДцД ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць aboot?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ", printer \"%s\" on server \"%s\""
+msgid "Bahamas"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Remote printer name missing!"
-msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐČузДл"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remote host name missing!"
-msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐČузДл"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remote printer name"
-msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
+msgid "Manual configuration"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ°"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remote host name"
-msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐČузДл"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "search"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../services.pm:1
+#, c-format
msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
msgstr ""
-"Đ”Đ»Ń ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐși Đ°ĐŽĐŽĐ°Đ»Đ”ĐœĐ°Đč чаргi ЮруĐșу ĐČĐ°ĐŒ ĐżĐ°Ń‚Ń€ŃĐ±ĐœĐ°\n"
-"ĐżĐ°Đ·ĐœĐ°Ń‡Ń‹Ń†ŃŒ iĐŒŃ Đ°ĐŽĐŽĐ°Đ»Đ”ĐœĐ°ĐłĐ° сДрĐČДра i iĐŒŃ чаргi ЮруĐșу,\n"
-"у яĐșую Đ°ĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ сДрĐČДр буЎзД Đ°ĐŽĐżŃ€Đ°ŃžĐ»ŃŃ†ŃŒ Đ·Đ°ĐŽĐ°ĐœĐœi."
+"Гэты паĐșДт Đ·Đ°ĐłŃ€ŃƒĐ¶Đ°Đ” Đ°Đ±Ń€Đ°ĐœŃƒŃŽ расĐșлаЎĐșу ĐșлаĐČiятуры яĐș ĐœĐ°Đ±ĐŸŃ€ Đ·\n"
+"/etc/sysconfig/keyboard. ĐĐœĐ° ĐŒĐŸĐ¶Đ° Đ±Ń‹Ń†ŃŒ Đ°Đ±Ń€Đ°ĐœĐ° таĐșŃĐ°ĐŒĐ° Đ· ĐŽĐ°ĐżĐ°ĐŒĐŸĐłĐ°Đč "
+"kbdconfig.\n"
+"Вы ĐŒĐŸĐ¶Đ°Ń†Đ” зрабiць ĐŽĐ°ŃŃ‚ŃƒĐżĐœĐ°Đč ŃĐ” ĐŽĐ»Ń ŃˆĐŒĐ°Ń‚Đ»Ń–Đșіх ĐŒĐ°ŃˆŃ‹ĐœĐ°Ńž."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Опцыi Đ°ĐŽĐŽĐ°Đ»Đ”ĐœĐ°ĐłĐ° ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ lpd"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Manual configuration"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ°"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "URI ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
+msgid "Xpmac (installation display driver)"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+msgid "Zeroconf host name must not contain a ."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Да яĐșĐŸĐłĐ° ĐżĐ°ŃĐ»ŃĐŽĐŸŃžĐœĐ°ĐłĐ° ĐżĐŸŃ€Ń‚Ńƒ ĐŽĐ°Đ»ŃƒŃ‡Đ°ĐœŃ‹ ĐŒĐ°ĐŽŃĐŒ?"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
msgstr ""
+"Syslog - гэта ŃŃ€ĐŸĐŽĐ°Đș, Đ· ĐŽĐ°ĐżĐ°ĐŒĐŸĐłĐ°Đč яĐșĐŸĐłĐ° ĐŒĐœĐŸĐłiя ĐŽŃĐŒĐ°ĐœŃ‹ Đ·Đ°ĐżiсĐČаюць "
+"паĐČĐ”ĐŽĐ°ĐŒĐ»Đ”ĐœĐœi\n"
+"ў Ń€ĐŸĐ·ĐœŃ‹Ń фаĐčлы статыстыĐși. Гэта ĐČĐ”Đ»ŃŒĐŒi ĐŽĐŸĐ±Ń€Đ° ĐŽĐ»Ń Đ°ĐłĐ»ŃĐŽŃƒ працы Ń€ĐŸĐ·ĐœŃ‹Ń… ŃĐ»ŃƒĐ¶Đ±Đ°Ńž."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Да яĐșĐŸĐłĐ° ĐżĐ°ŃĐ»ŃĐŽĐŸŃžĐœĐ°ĐłĐ° ĐżĐŸŃ€Ń‚Ńƒ ĐŽĐ°Đ»ŃƒŃ‡Đ°ĐœŃ‹ ĐŒĐ°ĐŽŃĐŒ?"
+msgid "Unknown/Others"
+msgstr "ĐĐłŃƒĐ»ŃŒĐœŃ‹"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+msgid "No TV Card detected!"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr ""
+msgid "Options"
+msgstr "Опцыi"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Currently, no alternative possibility is available"
+msgid "The printer \"%s\" is set as the default printer now."
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "The following printer was auto-detected. "
-msgstr "ĐĐ°ŃŃ‚ŃƒĐżĐœŃ‹Ń паĐșДты Đ±ŃƒĐŽŃƒŃ†ŃŒ ĐČŃ‹ĐŽĐ°Đ»Đ”ĐœŃ‹"
+msgid "Auto-detected"
+msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid ""
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
+msgstr ""
+"Ваш ĐșĐ°ĐŒĐż'ютар ĐŒĐŸĐ¶Đ° Đ±Ń‹Ń†ŃŒ сĐșĐ°ĐœŃ„Ń–ĐłŃƒŃ€Đ°ĐČĐ°ĐœŃ‹ ĐœĐ° ŃŃƒĐŒĐ”ŃĐœĐ°Đ” ĐČыĐșĐ°Ń€Ń‹ŃŃ‚Đ°ĐœĐœĐ”\n"
+" Đ†ĐœŃ‚ŃŃ€ĐœŃŃ‚Ńƒ (Internet Connection Sharing)?\n"
+"\n"
+"ЗаўĐČага: ĐČĐ°ĐŒ ĐżĐ°Ń‚Ń€ŃĐ±ĐœŃ‹ сДтĐșĐ°ĐČы аЮаптар ĐŽĐ»Ń паЎĐșĐ»ŃŽŃ‡ŃĐœĐœŃ ĐŽĐ° ЛВС.\n"
+"\n"
+"Вы жаЎаДцД ŃƒŃŃ‚Đ°Đ»ŃĐČаць ŃŃƒĐŒĐ”ŃĐœŃ‹ ĐŽĐŸŃŃ‚ŃƒĐż ĐŽĐ° Internet?"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
#: ../../printer/printerdrake.pm:1
@@ -10750,786 +10536,705 @@ msgid ""
"name in the input line"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr ""
+msgid "Refuse"
+msgstr "АЎĐșĐ°Đ·Đ°Ń†ŃŒ"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "HFS"
+msgstr "HFS"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Available printers"
-msgstr "Đ”Đ°ŃŃ‚ŃƒĐżĐœŃ‹Ń паĐșДты"
+msgid "Remote Printers"
+msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "No printer found!"
-msgstr "ЛаĐșĐ°Đ»ŃŒĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
+#: ../../fs.pm:1
+#, c-format
+msgid "Creating and formatting file %s"
+msgstr "СтĐČĐ°Ń€ŃĐœĐœĐ” i Ń„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœĐ” фаĐčла %s"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "You must enter a device or file name!"
-msgstr "URI ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of sgid files."
+msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Local Printer"
-msgstr "ЛаĐșĐ°Đ»ŃŒĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Choose an existing LVM to add to"
+msgstr "Đ’Ń‹Đ±ŃŃ€Ń‹Ń†Đ” iŃĐœŃƒŃŽŃ‡Ń‹ LVM ĐŽĐ»Ń ĐŽĐ°Đ±Đ°ŃžĐ»Đ”ĐœĐœŃ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "USB printer \\#%s"
-msgstr "IĐŒŃ ЮруĐșарĐși"
+msgid "xfs restart"
+msgstr "Đ°Đ±ĐŒĐ”Đ¶Đ°ĐČĐ°ĐœĐœĐ”"
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "IĐŒŃ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
+#, c-format
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "SMB/Windows 95/98/NT"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No partition available"
+msgstr "ĐœŃĐŒĐ° ĐŽĐ°ŃŃ‚ŃƒĐżĐœŃ‹Ń… разЎзДлаў"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "ХДтĐșĐ°ĐČы ĐżŃ€Ń‹ĐœŃ‚ŃŃ€ (TCP/Socket)"
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Use the scanners on hosts: "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "Đ”ŃƒĐ±Đ»ŃĐČĐ°ĐœĐœĐ” ĐżŃƒĐœĐșту ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ %s"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Unselected All"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "SMB/Windows 95/98/NT"
+msgid "Domain Name Resolver"
+msgstr "IĐŒŃ ĐŽĐ°ĐŒĐ”ĐœŃƒ"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", network printer \"%s\", port %s"
+msgid "Encryption key (again)"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
+msgid "Samba share name missing!"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgid "True Type install done"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Detection in progress"
+msgstr "Đ”ŃƒĐ±Đ»ŃĐČĐ°ĐœĐœĐ” ĐżŃƒĐœĐșту ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ %s"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
+msgid "Build Whole Kernel -->"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps.pm:1
+#, c-format
+msgid "Welcome to %s"
+msgstr "Đ ĐŽĐ Â°ĐĄĐ‚Đ Ò‘ĐĄĐŒĐĄâ€ĄĐ Đ…Đ Â° Đ Â·Đ Â°Đ Ń—ĐĄĐ‚Đ Â°ĐĄâ‚ŹĐ Â°Đ Â”Đ Ń˜ Сѓ %s"
+
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "УстаўцД ЮысĐșĐ”Ń‚Ńƒ ў ЮысĐșĐ°ĐČĐŸĐŽ %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+msgid "Bootsplash"
msgstr ""
#: ../../printer/printerdrake.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
+"The following printer\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
+"%s%s\n"
+"is directly connected to your system"
+msgstr "ĐŁ ĐČашаĐč ŃŃ–ŃŃ‚ŃĐŒĐ” ĐœŃĐŒĐ° ĐœiĐČĐŸĐŽĐœĐ°ĐłĐ° сДтĐșĐ°ĐČага аЮаптара!"
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
+#, fuzzy, c-format
+msgid "Printer sharing on hosts/networks: "
+msgstr "ĐŸŃ€Ń‹ĐœŃ‚ŃŃ€"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
+"ĐŁ ĐœĐ”ĐșĐ°Ń‚ĐŸŃ€Ń‹Ń… ĐČыпаЮĐșах %s ЮраĐčĐČĐ”Ń€Ńƒ ĐżĐ°Ń‚Ń€ŃĐ±ĐœĐ° ĐœĐ”ĐșĐ°Ń‚ĐŸŃ€Đ°Ń ЮаЮатĐșĐŸĐČая iĐœŃ„Đ°Ń€ĐŒĐ°Ń†Ń‹Ń,\n"
+"алД Đ·ĐČычаĐčĐœĐ° гэта ĐœĐ” ĐżĐ°Ń‚Ń€Đ°Đ±ŃƒĐ”Ń†Ń†Đ°. ĐŠi ĐœĐ” жаЎаДцД ĐČы Đ·Đ°ĐŽĐ°Ń†ŃŒ ĐŽĐ»Ń ŃĐłĐŸ\n"
+"ЮаЮатĐșĐŸĐČыя ĐŸĐżŃ†Ń‹i, цi ĐŽĐ°Đ·ĐČĐŸĐ»iцД ЮраĐčĐČĐ”Ń€Ńƒ пратэсцiраĐČаць ĐŒĐ°ŃˆŃ‹ĐœŃƒ\n"
+"ў ĐżĐŸŃˆŃƒĐșах ĐœĐ”Đ°Đ±Ń…ĐŸĐŽĐœĐ°Đč iĐœŃ„Đ°Ń€ĐŒĐ°Ń†Ń‹i? ĐœĐ°ĐłŃ‡Ń‹ĐŒĐ°, тэсцiраĐČĐ°ĐœĐœĐ” прыĐČŃĐŽĐ·Đ”\n"
+"ĐŽĐ° ŃĐżŃ‹ĐœĐ”ĐœĐœŃ ĐșĐ°ĐŒĐż'ютэру, алД ŃĐœĐŸ ĐœiŃ‡ĐŸĐłĐ° ĐœĐ” сапсуД."
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ")"
+msgid "Not the correct CD label. Disk is labelled %s."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid " on "
-msgstr ""
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
+"\n"
+"%s\n"
+"\n"
+"Click on Configure to launch the setup wizard."
+msgstr "ĐĄŃƒĐŒĐ”ŃĐœĐ°Đ” IĐœŃ‚ŃŃ€ĐœŃŃ‚-Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ”"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "("
+msgid "Cuba"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Configuring printer ..."
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
msgid "Searching for new printers..."
msgstr "Đ”Đ°ŃŃ‚ŃƒĐżĐœŃ‹Ń паĐșДты"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Belize"
+msgstr "Đ—ĐŒŃĐœĐ”ĐœĐœĐ” ĐżĐ°ĐŒĐ”Ń€Đ°Ńž"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
+msgid " (multi-session)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
+msgid "Kernel Boot Timeout"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Вы жаЎаДцД, Đșаб ĐłŃŃ‚Đ°Đ” Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ” стартаĐČала пры Đ·Đ°ĐłŃ€ŃƒĐ·Ń†Ń‹?"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "ЖаЎаДцД пратэсцiраĐČаць ЮруĐș?"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
+"ĐŸĐ°ĐŽŃ‚Ń€Ń‹ĐŒĐșĐ° 3D-пасĐșĐ°Ń€ŃĐœĐœŃ ў ВашаĐč ĐČіЮэаĐșарцД ĐČыĐșĐ°ĐœĐ°ĐœĐ° Ń‚ĐŸĐ»ŃŒĐșі ў XFree %s.\n"
+"XFree %s ĐŒĐŸĐ¶Đ° ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць Ń‚ĐŸĐ»ŃŒĐșі 2D-пасĐșĐ°Ń€ŃĐœĐœĐ” ĐŽĐ»Ń гэтаĐč ĐČіЮэаĐșарты."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr "Да яĐșĐŸĐłĐ° ĐżĐ°ŃĐ»ŃĐŽĐŸŃžĐœĐ°ĐłĐ° ĐżĐŸŃ€Ń‚Ńƒ ĐŽĐ°Đ»ŃƒŃ‡Đ°ĐœŃ‹ ĐŒĐ°ĐŽŃĐŒ?"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "МаĐčстар ĐżĐ°ĐŽŃ€Ń‹Ń…Ń‚ĐŸŃžĐși разЎзДлаў DrakX Đ·ĐœĐ°ĐčŃˆĐŸŃž ĐœĐ°ŃŃ‚ŃƒĐżĐœŃ‹Ń ĐČĐ°Ń€Ń‹ŃĐœŃ‚Ń‹:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr ""
+msgid "Hungarian"
+msgstr "МаЮьярсĐși"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
msgstr ""
+"ĐĐ±ŃŃ€Ń‹Ń†Đ” ĐČашага праĐČĐ°ĐčЮара.\n"
+"ĐșĐ°Đ»i ŃĐłĐŸ ĐœŃĐŒĐ° ў ĐłŃŃ‚Ń‹ĐŒ спiсД, Đ°Đ±ŃŃ€Ń‹Ń†Đ” тып ``IĐœŃˆŃ‹''"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
+msgid "Automatic time synchronization (using NTP)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr "ĐŁ ĐČашаĐč ŃŃ–ŃŃ‚ŃĐŒĐ” ĐœŃĐŒĐ° ĐœiĐČĐŸĐŽĐœĐ°ĐłĐ° сДтĐșĐ°ĐČага аЮаптара!"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "8 MB"
+msgstr "8 ĐœĐ±"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "ĐŁ ĐČашаĐč ŃŃ–ŃŃ‚ŃĐŒĐ” ĐœŃĐŒĐ° ĐœiĐČĐŸĐŽĐœĐ°ĐłĐ° сДтĐșĐ°ĐČага аЮаптара!"
+msgid "LDAP Server"
+msgstr "сДрĐČДр"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../services.pm:1
+#, c-format
msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "ĐŁ ĐČашаĐč ŃŃ–ŃŃ‚ŃĐŒĐ” ĐœŃĐŒĐ° ĐœiĐČĐŸĐŽĐœĐ°ĐłĐ° сДтĐșĐ°ĐČага аЮаптара!"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
+msgstr ""
+"ĐŸĐ°ĐŽŃ‚Ń€Ń‹ĐŒĐșĐ° PCMCIA - гэта Đ·ĐČычаĐčĐœĐ° ĐżĐ°ĐŽŃ‚Ń€Ń‹ĐŒĐșĐ° таĐșiх рэчаў, яĐș Ethernet i\n"
+"ĐŒĐ°ĐŽŃĐŒŃ‹ ў ĐœĐ°ŃžŃ‚Đ±ŃƒĐșах. Đ’Đ°ĐŒ ĐœŃĐŒĐ° ĐœĐ”Đ°Đ±Ń…ĐŸĐŽĐœĐ°ŃŃ†i ĐșĐ°ĐœŃ„iгураĐČаць iх, ĐșĐ°Đ»i ĐœĐ° ĐČашаĐč\n"
+"ĐŒĐ°ŃˆŃ‹ĐœĐ” iх ĐœŃĐŒĐ°, цi ŃĐœĐ° ĐœĐ” ĐœĐ°ŃžŃ‚Đ±ŃƒĐș."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, fuzzy, c-format
-msgid "and %d unknown printers"
-msgstr "IĐŒŃ ЮруĐșарĐși"
+msgid "Choose your country"
+msgstr "Выбар ĐșлаĐČiятуры"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "and one unknown printer"
-msgstr "IĐŒŃ ЮруĐșарĐși"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"- System Files:\n"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Checking your system..."
-msgstr "ĐŻĐșую сiŃŃ‚ŃĐŒŃƒ ЮруĐșу Вы жаЎаДцД ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць?"
+msgid "Standalone Tools"
+msgstr "ĐšĐ°ĐœŃĐŸĐ»ŃŒĐœŃ‹Ń Ń–ĐœŃŃ‚Ń€ŃƒĐŒĐ”ĐœŃ‚Đ°Đ»ŃŒĐœŃ‹Ń ŃŃ€ĐŸĐŽĐșі"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Restarting CUPS..."
-msgstr "Đ°Đ±ĐŒĐ”Đ¶Đ°ĐČĐ°ĐœĐœĐ”"
+msgid "Where"
+msgstr "З ĐșĐŸĐ»Đ°ĐŒ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
+msgid "but not matching"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Examples for correct IPs:\n"
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Гэта ĐŽĐ°ĐșĐ»Đ°ĐŽĐœĐ°?"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Server IP missing!"
-msgstr "IĐŒŃ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Configuring PCMCIA cards..."
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° Đșарт PCMCIA ..."
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "If no port is given, 631 will be taken as default."
+msgid "kdesu missing"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
+msgid "Encryption key"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ сДрĐČДр CUPS"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected server"
-msgstr "Đ’Ń‹ĐŽĐ°Đ»iць чаргу ЮруĐșу"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Edit selected server"
-msgstr "Đ’Ń‹ĐŽĐ°Đ»iць чаргу ЮруĐșу"
+#: ../../lang.pm:1
+#, c-format
+msgid "Christmas Island"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Add server"
-msgstr "ДаЮаць ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr "Працэс ŃƒŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ Đ·Đ°ĐłŃ€ŃƒĐ·Ń‡Ń‹ĐșĐ° ĐœĐ” Đ°Ń‚Ń€Ń‹ĐŒĐ°ŃžŃŃ. ĐŁĐ·ĐœiĐșла ĐœĐ°ŃŃ‚ŃƒĐżĐœĐ°Ń ĐżĐ°ĐŒŃ‹Đ»ĐșĐ°:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
+msgid "EIDE/SCSI channel"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "IP address of host/network:"
+msgid "Set this printer as the default"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
+msgid "partition %s"
+msgstr "РазЎзДл %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr ""
+msgid "Paranoid"
+msgstr "ĐŸĐ°Ń€Đ°ĐœĐ°iĐŽĐ°Đ»ŃŒĐœŃ‹"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "NIS"
+msgstr "ВыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць NIS"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Host/network IP address missing."
+msgid "<-- Del User"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
+msgid "Location on the bus"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Sharing of local printers"
-msgstr "Đ”Đ°ŃŃ‚ŃƒĐżĐœŃ‹Ń паĐșДты"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected host/network"
-msgstr "Đ’Ń‹ĐŽĐ°Đ»iць чаргу ЮруĐșу"
+msgid "No printer found!"
+msgstr "ЛаĐșĐ°Đ»ŃŒĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Edit selected host/network"
+msgid "the vendor name of the device"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Add host/network"
-msgstr ""
+msgid "Erase entire disk"
+msgstr "Сцёрцi ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń ĐœĐ° ўсiĐŒ ЮысĐșу"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
+msgid " (Default)"
+msgstr " (Па ĐŽĐ°ĐŒĐ°ŃžĐ»Đ”ĐœĐœŃŽ)"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Automatic correction of CUPS configuration"
+msgid "Automatic reconfiguration"
msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ĐŒĐ°ĐŽŃĐŒŃƒ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
+msgid "Receiving Speed:"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Japanese text printing mode"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° сДтĐși"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
+msgid "Turks and Caicos Islands"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "None"
-msgstr "Đ—Ń€ĐŸĐ±Đ»Đ”ĐœĐ°"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Additional CUPS servers: "
-msgstr "IP сДрĐČДра SMB"
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "No remote machines"
-msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
+msgid "permissions"
+msgstr "РазЎзДл %s"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Custom configuration"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ°"
+#, c-format
+msgid "<- Previous"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "ĐŸŃ€Ń‹ĐœŃ‚ŃŃ€"
+msgid "Internet Connection Sharing configuration"
+msgstr "IĐœŃ‚ŃŃ€ĐœŃŃ‚ Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ” i ĐșĐ°ĐœŃ„iгурацыя"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr ""
+msgid "Toggle between flat and group sorted"
+msgstr "ĐŸĐ”Ń€Đ°ĐșĐ»ŃŽŃ‡ŃĐœĐœĐ” ĐżĐ°ĐŒiж упараЮĐșĐ°ĐČĐ°ĐœĐœĐ”ĐŒ па ĐłŃ€ŃƒĐżĐ” i Đ°ŃĐŸĐ±Đșах"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr ""
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Themes"
+msgstr "ДрэĐČĐ°"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
+msgid "Options: %s"
+msgstr "Опцыi: %s"
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
-msgstr ""
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
+msgstr "ĐĄŃƒĐŒĐ”ŃĐœĐ°Đ” IĐœŃ‚ŃŃ€ĐœŃŃ‚-Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ”"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "CUPS printer configuration"
+msgid "OKI winprinter configuration"
msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ Đ· IĐœŃ‚ŃŃ€ĐœŃŃ‚Đ°ĐŒ"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgid "Saint Helena"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
+msgid "Security Level"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐși ŃžĐ·Ń€ĐŸŃžĐœŃ Đ±ŃŃĐżĐ”Đși"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
msgid ""
+"Some steps are not completed.\n"
"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
msgstr ""
-"ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ CUPS сДрĐČДр ĐœĐ” ĐżĐ°Ń‚Ń€Đ°Đ±ŃƒĐ” Đ°ĐŽ Вас ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐșі ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ\n"
-"ĐœĐ° гэтаĐč ĐŒĐ°ŃˆŃ‹ĐœĐ”, Ń‘Đœ буЎзД Đ·ĐœĐŸĐčĐŽĐ·Đ”ĐœŃ‹ Đ°ŃžŃ‚Đ°ĐŒĐ°Ń‚Ń‹Ń‡ĐœĐ°.\n"
-"Калі Вы ĐœĐ” ŃžĐżŃŃžĐœĐ”ĐœŃ‹, Đ°Đ±ŃŃ€Ń‹Ń†Đ” \"ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ сДрĐČДр CUPS\"."
+"ĐĐ”ĐșĐ°Ń‚ĐŸŃ€Ń‹Ń ĐșŃ€ĐŸĐși ĐœĐ” Đ·Đ°ĐČĐ”Ń€ŃˆĐ°ĐœŃ‹.\n"
+"Вы сапраўЮы жаЎаДцД ĐČыĐčсцi зараз?"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "How is the printer connected?"
-msgstr "ĐŻĐș ĐżŃ€Ń‹ĐœŃ‚Đ°Ń€ ĐŽĐ°Đ»ŃƒŃ‡Đ°ĐœŃ‹?"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Sudan"
+msgstr "SunOS"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Select Printer Connection"
-msgstr "Выбар тыпу Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
+msgid "Polish (qwertz layout)"
+msgstr "ĐŸĐŸĐ»ŃŒŃĐși (qwertz расĐșлаЎĐșĐ°)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
+msgid "Syria"
msgstr ""
-#: ../../security/help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
#, c-format
msgid ""
-"Arguments: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
"\n"
-"Set the user umask."
-msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (val)\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
"\n"
-"Set the shell timeout. A value of zero means no timeout."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (size)\n"
-"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
+msgid "Portuguese"
+msgstr "ĐŸĐ°Ń€Ń‚ŃƒĐłĐ°Đ»ŃŒŃĐși"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr ""
+msgid "Loopback file name: "
+msgstr "IĐŒŃ ĐČiŃ€Ń‚ŃƒĐ°Đ»ŃŒĐœĐ°ĐłĐ° Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ"
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, check open ports."
-msgstr ""
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "IP аЮрас паĐČiĐœĐ”Đœ Đ±Ń‹Ń†ŃŒ у Ń„Đ°Ń€ĐŒĐ°Ń†Đ” 1.2.3.4"
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Serbia"
+msgstr "ĐżĐ°ŃĐ»ŃĐŽĐŸŃžĐœĐ°Ń"
-#: ../../security/help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "if set to yes, report check result by mail."
+msgid "Newzealand"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
+msgid "This directory should remain within the root filesystem"
+msgstr "Гэты ĐșĐ°Ń‚Đ°Đ»ĐŸĐł паĐČŃ–ĐœĐ”Đœ Đ·ĐœĐ°Ń…ĐŸĐŽĐ·Ń–Ń†Ń†Đ° ŃžĐœŃƒŃ‚Ń€Ń‹ ĐșĐ°Ń€Đ°ĐœŃ‘ĐČĐ°Đč фаĐčлаĐČĐ°Đč ŃŃ–ŃŃ‚ŃĐŒŃ‹"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, reports check result to tty."
+msgid "CapsLock key"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr ""
+msgid "Install bootloader"
+msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” Đ·Đ°ĐłŃ€ŃƒĐ·Ń‡Ń‹Đșу"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
+msgid "Select the memory size of your graphics card"
+msgstr "ĐŸĐ°Đ·ĐœĐ°Ń‡Ń†Đ” ĐżĐ°ĐŒĐ”Ń€ ĐČiĐŽŃĐ°ĐżĐ°ĐŒŃŃ†i"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, run chkrootkit checks."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
+msgid "Dynamic IP Address Pool:"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
+msgid "LVM name?"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "if set to yes, report check result to syslog."
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
-msgstr ""
+msgid "Found %s %s interfaces"
+msgstr "Đ—ĐœĐŸĐčĐŽĐ·Đ”ĐœŃ‹ %s %s iĐœŃ‚ŃŃ€Ń„Đ”Đčсы"
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "if set to yes, run the daily security checks."
+msgid "sticky-bit"
msgstr ""
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Post Install"
+msgstr "УсталёўĐșĐ°"
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr ""
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The internal domain name"
+msgstr "IĐŒŃ ЮруĐșарĐși"
-#: ../../security/help.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "if set to yes, report unowned files."
-msgstr ""
+msgid "Card IRQ"
+msgstr "IRQ Đșарты"
#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (umask)\n"
"\n"
-"Set the root umask."
+"Set the user umask."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
-"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+msgid "logdrake"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” ЮысĐșĐ°ĐČĐŸĐŽ, у яĐșiĐŒ буЎзД стĐČарацца Đ·Đ°ĐłŃ€ŃƒĐ·Đ°Ń‡ĐœĐ°Ń ЮысĐșДта"
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
+msgid "LILO with text menu"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "Everything (no firewall)"
+msgstr "Ўсё сĐșĐ°ĐœŃ„iгураĐČĐ°ĐœĐ°!"
+
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
+msgid "You must specify a kernel image"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
+msgid ", multi-function device on USB"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../interactive/newt.pm:1
+#, fuzzy, c-format
+msgid "Do"
+msgstr "Đ—Ń€ĐŸĐ±Đ»Đ”ĐœĐ°"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "ХуĐČŃĐ·ŃŒ Đ· Đ»ŃŽŃ€Đ°ĐŒ ĐŽĐ»Ń Đ°Ń‚Ń€Ń‹ĐŒĐ°ĐœĐœŃ спiсу ĐŽĐ°ŃŃ‚ŃƒĐżĐœŃ‹Ń… паĐșДтаў"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian AZERTY (old)"
+msgstr "ЛiŃ‚ĐŸŃžŃĐși AZERTY (стары)"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Brazilian (ABNT-2)"
+msgstr "БразiĐ»ŃŒŃĐși (ABNT-2)"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "IP address of host/network:"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
+#, fuzzy, c-format
+msgid "System installation"
+msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” SILO"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
+msgid "Saint Vincent and the Grenadines"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
+msgid "/File/_Open"
msgstr ""
#: ../../security/help.pm:1
@@ -11537,157 +11242,147 @@ msgstr ""
msgid ""
"Arguments: (arg)\n"
"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
+"The argument specifies if clients are authorized to connect\n"
+"to the X server on the tcp port 6000 or not."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Location of auto_install.cfg file"
+msgstr "СтĐČĐ°Ń€ŃĐœĐœĐ” ЮысĐșДты ĐŽĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
+
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
+msgid "Open Firmware Delay"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Hungary"
+msgstr "МаЮьярсĐși"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Total progess"
+msgstr "ПраĐČДрĐșĐ° ĐżĐ°Ń€Ń‚ĐŸŃž"
+
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Color configuration"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ°"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
+msgid "New Zealand"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "please choose the date to restore"
+msgstr "ĐșĐ°Đ»i ласĐșĐ°, ĐżĐ°Đ·ĐœĐ°Ń‡Ń†Đ” тып ĐČашаĐč ĐŒŃ‹ŃˆŃ‹."
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
+msgid "Switching from ext2 to ext3"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
+msgid "LPRng"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
+msgid "Netherlands Antilles"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"The argument specifies if clients are authorized to connect\n"
-"to the X server on the tcp port 6000 or not."
+msgid "Browse to new restore repository."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "and %d unknown printers"
+msgstr "IĐŒŃ ЮруĐșарĐși"
+
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
+msgid "No ISDN PCI card found. Please select one on the next screen."
+msgstr "Карта ISDN PCI ĐœĐ” Đ·ĐœĐŸĐčĐŽĐ·Đ”ĐœĐ°. Калi ласĐșĐ°, ĐżĐ°Đ·ĐœĐ°Ń‡Ń†Đ” ĐœĐ° ĐœĐ°ŃŃ‚ŃƒĐżĐœŃ‹ĐŒ эĐșŃ€Đ°ĐœĐ”."
-#: ../../security/help.pm:1
+#: ../../common.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
+msgid "GB"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
+msgid "Please give a user name"
+msgstr "Калi ласĐșĐ°, уĐČŃĐŽĐ·iцД iĐŒŃ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșу"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
+msgid "Enable CD Boot?"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
+msgid " enter `void' for void entry"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
+msgid "on Hard Drive"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Winmodem connection"
+msgstr "Đ—Đ»ŃƒŃ‡ŃĐœĐœĐ” ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
"\n"
-" Accept/Refuse broadcasted icmp echo."
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
msgstr ""
#: ../../security/help.pm:1
@@ -11695,740 +11390,536 @@ msgstr ""
msgid ""
"Arguments: (arg)\n"
"\n"
-"Accept/Refuse bogus IPv4 error messages."
+"Set the password history length to prevent password reuse."
msgstr ""
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Security Administrator (login or email)"
+msgid "Now, you can run xawtv (under X Window!) !\n"
msgstr ""
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
+msgid "Not enough swap space to fulfill installation, please add some"
msgstr ""
+"ĐĐ” хапаД ĐŒĐ”ŃŃ†Đ° ў Đ±ŃƒŃ„Đ”Ń€Ń‹ паЎĐșачĐși (swap) ĐŽĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ, паĐČŃĐ»iчцД ŃĐłĐŸ."
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Use libsafe for servers"
-msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” ЮаЮатĐșĐŸĐČыя ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐși ĐŽĐ»Ń сДрĐČДра"
-
-#: ../../security/level.pm:1
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Security level"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐși ŃžĐ·Ń€ĐŸŃžĐœŃ Đ±ŃŃĐżĐ”Đși"
+msgid "%s on %s"
+msgstr "ĐŸĐŸŃ€Ń‚"
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Please choose the desired security level"
-msgstr "ĐŁĐ·Ń€ĐŸĐČĐ”ĐœŃŒ Đ±ŃŃĐżĐ”Đși"
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "DrakSec Basic Options"
-msgstr "Опцыi"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Which is your timezone?"
+msgstr "ĐŻĐși ĐČаш часаĐČы ĐżĐŸŃŃ?"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"ĐŸŃ€Ń‹ĐŒĐ°ŃŽŃ†Ń†Đ° ўласцiĐČасцi 4 ŃƒĐ·Ń€ĐŸŃžĐœŃ, алД зараз сiŃŃ‚ŃĐŒĐ° ĐżĐŸŃžĐœĐ°ŃŃ†ŃŽ Đ·Đ°Ń‡Ń‹ĐœĐ”ĐœĐ°.\n"
-"ĐŸĐ°Ń€Đ°ĐŒĐ”Ń‚Ń€Ń‹ Đ±ŃŃĐżĐ”Đși ŃžŃŃ‚Đ°ĐœĐŸŃžĐ»Đ”ĐœŃ‹ ĐœĐ° ĐŒĐ°ĐșсiĐŒŃƒĐŒ."
+msgid "Guinea"
+msgstr "ĐĐłŃƒĐ»ŃŒĐœŃ‹"
-#: ../../security/level.pm:1
+#: ../../network/tools.pm:1
#, fuzzy, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"На ĐłŃŃ‚Đ°ĐŒ ŃƒĐ·Ń€ĐŸŃžĐœĐ” Đ±ŃŃĐżĐ”Đși ĐŒĐ°ĐłŃ‡Ń‹ĐŒĐ° ĐČыĐșĐ°Ń€Ń‹ŃŃ‚Đ°ĐœĐœĐ” сiŃŃ‚ŃĐŒŃ‹ ў яĐșасцi\n"
-"сДрĐČĐ”Ń€Ńƒ. ĐŁĐ·Ń€ĐŸĐČĐ”ĐœŃŒ Đ±ŃŃĐżĐ”Đși ЮастатĐșĐŸĐČĐ° ĐČŃ‹ŃĐŸĐși ĐŽĐ»Ń Ń€Đ°Đ±ĐŸŃ‚Ń‹\n"
-"сДрĐČĐ”Ń€Ńƒ, яĐși ЎапусĐșĐ°Đ” Đ·Đ»ŃƒŃ‡ŃĐœĐœi са ŃˆĐŒĐ°Ń‚Đ»iĐșiĐŒi ĐșĐ»iĐ”ĐœŃ‚Đ°ĐŒi."
+msgid "The system is now connected to the Internet."
+msgstr "ĐŻĐș ĐČы ĐżĐ»Đ°ĐœŃƒĐ”Ń†Đ” ĐŽĐ°Đ»ŃƒŃ‡Ń‹Ń†Ń†Đ° ĐŽĐ° IĐœŃ‚ŃŃ€ĐœŃŃ‚Ńƒ?"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
+msgid "South Georgia and the South Sandwich Islands"
msgstr ""
-"Гэта ŃŃ‚Đ°ĐœĐŽĐ°Ń€Ń‚ĐœŃ‹ ŃƒĐ·Ń€ĐŸĐČĐ”ĐœŃŒ Đ±ŃŃĐżĐ”Đși, яĐși рэĐșĐ°ĐŒĐ”ĐœĐŽĐ°ĐČĐ°ĐœŃ‹ ĐŽĐ»Ń ĐșĐ°ĐŒĐż'ютэру,\n"
-"яĐși ĐŽĐ°Đ»ŃƒŃ‡Đ°ĐœŃ‹ ĐŽĐ° Internet у яĐșасцi ĐșĐ»iĐ”ĐœŃ‚Ńƒ. Đ”Đ°ĐŽĐ°ĐœŃ‹Ń ĐœĐŸĐČыя праĐČДрĐși\n"
-"Đ±ŃŃĐżĐ”Đși."
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
+msgid "Japan (broadcast)"
msgstr ""
-"ĐŸĐ°Ń€ĐŸĐ»ŃŒ зараз уĐșĐ»ŃŽŃ‡Đ°ĐœŃ‹, алД ĐČыĐșĐ°Ń€Ń‹ŃŃ‚Đ°ĐœĐœĐ” ĐșĐ°ĐŒĐż'ютэру ў яĐșасцi сДтĐșĐ°ĐČага\n"
-"таĐșŃĐ°ĐŒĐ° ĐœĐ” рэĐșĐ°ĐŒĐ”ĐœĐŽĐ°ĐČĐ°ĐœĐ°."
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
+msgid "Mozambique"
msgstr ""
-"Гэты ŃƒĐ·Ń€ĐŸĐČĐ”ĐœŃŒ ĐœĐ”Đ°Đ±Ń…ĐŸĐŽĐœĐ° ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць Đ· Đ°ŃŃ†ŃŃ€ĐŸĐłĐ°Đč. ĐĄiŃŃ‚ŃĐŒĐ° буЎзД прасцДĐč\n"
-"у ĐșĐ°Ń€Ń‹ŃŃ‚Đ°ĐœĐœi, алД i Đ±ĐŸĐ»ŃŒŃˆ Ń‡ŃƒŃ‚ĐœĐ°Đč: гэты ŃƒĐ·Ń€ĐŸĐČĐ”ĐœŃŒ Đ±ŃŃĐżĐ”Đși ĐœĐ”Đ»ŃŒĐłĐ° "
-"ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць\n"
-"ĐœĐ° ĐŒĐ°ŃˆŃ‹ĐœĐ°Ń…, яĐșiя ĐŽĐ°Đ»ŃƒŃ‡Đ°ĐœŃ‹ ĐŽĐ° сДтĐși цi ĐŽĐ° Internet. ĐŁĐČĐ°Ń…ĐŸĐŽ ĐœĐ” Đ°Đ±Đ°Ń€ĐŸĐœĐ”ĐœŃ‹ "
-"ĐżĐ°Ń€ĐŸĐ»Đ”ĐŒ."
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Paranoid"
-msgstr "ĐŸĐ°Ń€Đ°ĐœĐ°iĐŽĐ°Đ»ŃŒĐœŃ‹"
+msgid "Icon"
+msgstr "ПiĐșŃ‚Đ°ĐłŃ€Đ°ĐŒĐ°"
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Higher"
-msgstr "Đ’Ń‹ŃĐŸĐși"
+msgid "Please choose what you want to backup"
+msgstr "Выбар паĐșДтаў ĐŽĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
-#: ../../security/level.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "High"
-msgstr "Đ’Ń‹ŃĐŸĐși"
+msgid "256 colors (8 bits)"
+msgstr "256 ĐșĐŸĐ»Đ”Ń€Đ°Ńž (8 бiтаў)"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Poor"
-msgstr "Đ—ŃƒŃŃ–ĐŒ слабы"
+msgid "Read-write"
+msgstr "Đ§Ń‹Ń‚Đ°ĐœĐœĐ”-Đ·Đ°Đżiс"
-#: ../../security/level.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Welcome To Crackers"
-msgstr "ĐĄĐ°Ń€ĐŽŃŃ‡ĐœĐ° Đ·Đ°ĐżŃ€Đ°ŃˆĐ°Đ”ĐŒ у Crackers"
+msgid "Size: %s\n"
+msgstr "ĐŸĐ°ĐŒĐ”Ń€: %s\n"
-#: ../../standalone/XFdrake:1
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Калi ласĐșĐ°, пДраĐčĐŽĐ·iцД ў %s ĐŽĐ»Ń Đ°ĐșтыĐČацыi Đ·ĐŒŃĐœĐ”ĐœĐœŃŃž"
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Hostname: "
+msgstr "IĐŒŃ ĐŒĐ°ŃˆŃ‹ĐœŃ‹"
-#: ../../standalone/XFdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Калi ласĐșĐ°, ĐČыĐčĐŽĐ·iцД, Đ° ĐżĐŸŃ‚Ń‹ĐŒ сĐșарыстаĐčцД Ctrl-Alt-BackSpace"
+msgid "Chunk size %s\n"
+msgstr "ĐŸĐ°ĐŒĐ”Ń€ Ń„Ń€Đ°ĐłĐŒĐ”ĐœŃ‚Ńƒ %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgid "Build the future of Linux!"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Local Printer"
+msgstr "ЛаĐșĐ°Đ»ŃŒĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
+msgid ""
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Etherboot ISO image is %s"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "No floppy drive available!"
-msgstr "ДысĐșĐ°ĐČĐŸĐŽ ĐœĐ”ĐŽĐ°ŃŃ‚ŃƒĐżĐœŃ‹"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Floppy can be removed now"
-msgstr ""
+msgid "ADSL connection"
+msgstr "Đ Đ°Đ·ĐŒĐ”Ń€ĐșĐ°ĐČĐ°ĐœĐœĐ”"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Couldn't access the floppy!"
+msgid "No configuration, please click Wizard or Advanced.\n"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Please insert floppy disk:"
-msgstr "УстаўцД ЮысĐșĐ”Ń‚Ńƒ ў ЮысĐșĐ°ĐČĐŸĐŽ %s"
+msgid "Error!"
+msgstr "ĐŸĐ°ĐŒŃ‹Đ»ĐșĐ°"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "Write Config"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° X Window"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr ""
+msgid "cable connection detected"
+msgstr "Đ—Đ»ŃƒŃ‡ŃĐœĐœĐ” ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
+msgid "Permission denied transferring %s to %s"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "dhcpd Server Configuration"
-msgstr "ЗаĐșĐ°ĐœŃ‡ŃĐœĐœĐ” ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐși"
-
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "IP Range End:"
+msgid "/_Report Bug"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "IP Range Start:"
-msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Name Servers:"
-msgstr "NIS сДрĐČДр:"
+msgid "Resize"
+msgstr "Đ—ĐŒŃĐœĐ”ĐœĐœĐ” ĐżĐ°ĐŒĐ”Ń€Đ°Ńž"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Domain Name:"
-msgstr "IĐŒŃ ĐŽĐ°ĐŒĐ”ĐœŃƒ"
+msgid "Dominica"
+msgstr "NIS Domain"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Broadcast Address:"
+msgid "Please enter the device name to use for backup"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Subnet Mask:"
-msgstr ""
+msgid "Resolution: %s\n"
+msgstr "ĐŸĐ°ĐŒĐ”Ń€Ń‹ эĐșŃ€Đ°ĐœŃƒ: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Routers:"
+msgid "matching"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Netmask:"
-msgstr "МасĐșĐ° сДтĐși"
-
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
#, c-format
-msgid "Subnet:"
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "dhcpd Config..."
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° IDE"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "The following packages are going to be removed"
+msgstr "ĐĐ°ŃŃ‚ŃƒĐżĐœŃ‹Ń паĐșДты Đ±ŃƒĐŽŃƒŃ†ŃŒ ĐČŃ‹ĐŽĐ°Đ»Đ”ĐœŃ‹"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Delete Client"
-msgstr "Đ—Đœiшчыць"
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#, c-format
+msgid "Connect to the Internet"
+msgstr "Đ”Đ°Đ»ŃƒŃ‡ŃĐœĐœĐ” ĐŽĐ° IĐœŃ‚ŃŃ€ĐœŃŃ‚Ńƒ"
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "<-- Edit Client"
-msgstr ""
+msgid "Use existing partitions"
+msgstr "ВыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць iŃĐœŃƒŃŽŃ‡Ń‹ разЎзДл"
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Add Client -->"
-msgstr ""
+msgid "Canadian (Quebec)"
+msgstr "ĐšĐ°ĐœĐ°ĐŽŃĐși (КĐČĐ”Đ±ŃĐș)"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Allow Thin Clients"
+msgid "Mouse device: %s\n"
+msgstr "Мыш: %s\n"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Reselect correct fonts"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Thin Client"
+msgid ""
+"Options Description:\n"
+"\n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
+"\n"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
-msgid "No net boot images created!"
+msgid ""
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "type: %s"
-msgstr "бып: "
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "<-- Del User"
+msgid "We are now going to configure the %s connection."
msgstr ""
+"\n"
+"Вы ĐŒĐŸĐ¶Đ°Ń†Đ” Đ°ĐŽĐșлючыцца ці пДраĐșĐ°ĐœŃ„Ń–ĐłŃƒŃ€Đ°ĐČаць ĐČашаД Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ”."
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, fuzzy, c-format
-msgid "Add User -->"
-msgstr "ДаЮаць ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°"
+msgid "MandrakeExpert Corporate"
+msgstr "эĐșспДрт"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Delete All NBIs"
-msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” фаĐčĐ»"
+msgid "Write protection"
+msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "<-- Delete"
-msgstr "Đ—Đœiшчыць"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "This will take a few minutes."
-msgstr ""
+msgid "You've not selected any font"
+msgstr "Đ’Ń‹ĐŽĐ°Đ»iць чаргу ЮруĐșу"
-#: ../../standalone/drakTermServ:1
+#: ../../steps.pm:1
#, c-format
-msgid "Build All Kernels -->"
-msgstr ""
+msgid "Language"
+msgstr "Выбар ĐŒĐŸĐČы"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "No NIC selected!"
-msgstr "Đ Đ°Đ·ĐŒĐ”Ń€ĐșĐ°ĐČĐ°ĐœĐœĐ”"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Build Single NIC -->"
-msgstr ""
+msgid "Printer model selection"
+msgstr "Đ—Đ»ŃƒŃ‡ŃĐœĐœĐ” ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No kernel selected!"
-msgstr ""
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
+msgstr "УсД ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń ў разЎзДлД %s Đ±ŃƒĐŽŃƒŃ†ŃŒ ŃŃ‚Ń€Đ°Ń‡Đ°ĐœŃ‹ ĐżĐ°ŃĐ»Ń Đ·ĐŒĐ”ĐœŃ‹ ŃĐłĐŸ тыпу"
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
#, c-format
-msgid "Build Whole Kernel -->"
-msgstr ""
+msgid "%d seconds"
+msgstr "%d сДĐșŃƒĐœĐŽĐ°Ńž"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Boot ISO"
-msgstr ""
+msgid "Insert a blank floppy in drive %s"
+msgstr "УстаўцД ЮысĐșĐ”Ń‚Ńƒ ў ЮысĐșĐ°ĐČĐŸĐŽ %s"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Boot Floppy"
+msgid "A valid URI must be entered!"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
-"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
-"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
-"\n"
+msgid "Found \"%s\" interface do you want to use it ?"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+msgid "Re-configure interface and DHCP server"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
-msgstr ""
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid "Sound configuration"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ°"
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Add/Del Clients"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Photo test page"
+msgstr "ДруĐș тэстаĐČых ŃŃ‚Đ°Ń€ĐŸĐœĐ°Đș"
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, fuzzy, c-format
-msgid "Add/Del Users"
-msgstr "ДаЮаць ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°"
+msgid "Custom disk partitioning"
+msgstr "ВыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць iŃĐœŃƒŃŽŃ‡Ń‹ разЎзДл"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Net Boot Images"
+msgid "Enter Printer Name and Comments"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "СтĐČарыць загр. ЮысĐș"
+msgid ""
+"The following printers\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr "ĐŁ ĐČашаĐč ŃŃ–ŃŃ‚ŃĐŒĐ” ĐœŃĐŒĐ° ĐœiĐČĐŸĐŽĐœĐ°ĐłĐ° сДтĐșĐ°ĐČага аЮаптара!"
#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Stop Server"
-msgstr "NIS сДрĐČДр:"
+msgid "type: %s"
+msgstr "бып: "
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Start Server"
-msgstr "NIS сДрĐČДр:"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovakian (QWERTY)"
+msgstr "ХлаĐČацĐși (QWERTY)"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/draksound:1
#, fuzzy, c-format
-msgid "Disable Server"
-msgstr "ХДрĐČДр ЮруĐșу"
+msgid "No Sound Card detected!"
+msgstr "Đ Đ°Đ·ĐŒĐ”Ń€ĐșĐ°ĐČĐ°ĐœĐœĐ”"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Enable Server"
-msgstr "ХДрĐČДр ЮруĐșу"
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#, c-format
+msgid "Mouse Port"
+msgstr "ĐŸĐŸŃ€Ń‚ ĐŒŃ‹ŃˆŃ‹"
#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ Đ· IĐœŃ‚ŃŃ€ĐœŃŃ‚Đ°ĐŒ"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Remove the last item"
-msgstr "Đ€Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœĐ” ĐČiŃ€Ń‚ŃƒĐ°Đ»ŃŒĐœĐ°ĐłĐ° Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ %s"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Add an item"
-msgstr "ДаЮаць ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Auto Install"
-msgstr "УсталёўĐșĐ°"
-
-#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
msgstr ""
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid "Congratulations!"
-msgstr "ĐŸŃ€Ń‹ĐŒŃ–Ń†Đ” ĐČiĐœŃˆĐ°ĐČĐ°ĐœĐœi!"
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Ftp Server"
+msgstr "NIS сДрĐČДр:"
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Creating auto install floppy"
-msgstr "СтĐČĐ°Ń€ŃĐœĐœĐ” ЮысĐșДты ĐŽĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "manual"
+"Enable/Disable msec hourly security check."
msgstr ""
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
+msgid "%s fonts conversion"
msgstr ""
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Automatic Steps Configuration"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ĐŒĐ°ĐŽŃĐŒŃƒ"
+msgid "the type of bus on which the mouse is connected"
+msgstr "Калi ласĐșĐ°, ĐżĐ°Đ·ĐœĐ°Ń‡Ń†Đ” ĐżĐŸŃĐ»ŃĐŽĐŸŃžĐœŃ‹ ĐżĐŸŃ€Ń‚, ĐŽĐ° яĐșĐŸĐłĐ° паЎĐșĐ»ŃŽŃ‡Đ°ĐœĐ° ĐČашая ĐŒŃ‹Ńˆ."
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "replay"
-msgstr "ĐŸĐ”Ń€Đ°Đ·Đ°ĐłŃ€ŃƒĐ·iць"
+msgid "Uganda"
+msgstr "АЎĐșат"
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+"Arguments: (size)\n"
"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Auto Install Configurator"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ĐżĐ°ŃĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
+"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Error!"
-msgstr "ĐŸĐ°ĐŒŃ‹Đ»ĐșĐ°"
-
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
"\n"
-"Restore Backup Problems:\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"Description:\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
+"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
+msgid "Comoros"
+msgstr ""
+
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+"\n"
+"\n"
+"\n"
+"We are now going to configure the %s connection.\n"
+"\n"
+"\n"
+"Press OK to continue."
msgstr ""
+"\n"
+"Вы ĐŒĐŸĐ¶Đ°Ń†Đ” Đ°ĐŽĐșлючыцца ці пДраĐșĐ°ĐœŃ„Ń–ĐłŃƒŃ€Đ°ĐČаць ĐČашаД Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ”."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Yaboot mode"
+msgstr "Đ—Đ°ĐłŃ€ŃƒĐ·Đ°Ń‡ĐœĐ°Ń прылаЎа"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
+msgstr ""
+
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "ЗĐČычаĐčĐœĐ°Ń ĐŒŃ‹Ńˆ Đ· 3 ĐșĐœĐŸĐżĐșĐ°ĐŒŃ–"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select another media to restore from"
+msgstr "ĐșĐ°Đ»i ласĐșĐ°, ĐżĐ°Đ·ĐœĐ°Ń‡Ń†Đ” тып ĐČашаĐč ĐŒŃ‹ŃˆŃ‹."
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Software Manager"
+msgstr "IĐŒŃ ĐŽĐ»Ń Ń€Đ°Đ·ĐŒĐ”Ń€ĐșĐ°ĐČĐ°ĐœĐ°ĐłĐ° рэсурсу"
+
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"restore description:\n"
+"Restore Description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
@@ -12440,4574 +11931,5121 @@ msgid ""
"\n"
" - Incremental Backups:\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
+" - Differential Backups:\n"
" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
+msgid "Re-submit"
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
+msgid "CD in place - continue."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Drakbackup"
+msgid "KB"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Restore"
-msgstr "ĐĐŽĐœĐ°ŃžĐ»Đ”ĐœĐœĐ” Đ· фаĐčлу"
+msgid "Network & Internet"
+msgstr "ХДтĐșĐ°ĐČы iĐœŃ‚ŃŃ€Ń„Đ”Đčс"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Now"
-msgstr "Настр. фаĐčлаĐČых сiŃŃ‚ŃĐŒĐ°Ńž"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "ЛiŃ‚ĐŸŃžŃĐși \"Ń„Đ°ĐœĐ”Ń‚Ń‹Ń‡ĐœŃ‹\" QWERTY"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Advanced Configuration"
-msgstr "ЗаĐșĐ°ĐœŃ‡ŃĐœĐœĐ” ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐși"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Net Boot Images"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Wizard Configuration"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ°"
+msgid "Sharing of local scanners"
+msgstr "Đ”Đ°ŃŃ‚ŃƒĐżĐœŃ‹Ń паĐșДты"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "View Backup Configuration."
-msgstr "ĐšĐ°ĐœŃ„iгурацыя сДтĐși"
+#: ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Now from configuration file"
-msgstr "ĐšĐ°ĐœŃ„iгурацыя сДтĐși"
+#: ../../services.pm:1
+#, c-format
+msgid "Services and deamons"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Drakbackup Configuration"
-msgstr "ĐšĐ°ĐœŃ„iгурацыя сДтĐși"
+msgid "Remote host name missing!"
+msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐČузДл"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Total Progress"
+msgid "with /usr"
msgstr ""
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Sending files..."
-msgstr "ЗахаĐČĐ°ĐœĐœĐ” ў фаĐčĐ»"
+msgid "Network"
+msgstr "ХДтĐșĐ°:"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "files sending by FTP"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup other files"
-msgstr "Đ”Ń€ŃĐœĐœŃ‹ фаĐčĐ» Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČĐ°Đč ĐșĐŸĐżii"
+#: ../../any.pm:1
+#, c-format
+msgid "This password is too simple"
+msgstr "Гэты ĐżĐ°Ń€ĐŸĐ»ŃŒ Đ·Đ°ĐœĐ°ĐŽŃ‚Đ° ĐżŃ€ĐŸŃŃ‚Ń‹"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup user files"
-msgstr "Đ”Ń€ŃĐœĐœŃ‹ фаĐčĐ» Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČĐ°Đč ĐșĐŸĐżii"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovakian (QWERTZ)"
+msgstr "ХлаĐČацĐși (QWERTZ)"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup system files"
-msgstr "Đ”Ń€ŃĐœĐœŃ‹ фаĐčĐ» Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČĐ°Đč ĐșĐŸĐżii"
+#: ../../share/advertising/06-development.pl:1
+#, c-format
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Under Devel ... please wait."
+msgid "Truly minimal install (especially no urpmi)"
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+" Transfer \n"
+"Now"
msgstr ""
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Please select data to backup..."
-msgstr "Калi ласĐșĐ°, Đ°Đ±ŃŃ€Ń‹Ń†Đ” ĐŒĐŸĐČу ĐŽĐ»Ń ĐșĐ°Ń€Ń‹ŃŃ‚Đ°ĐœĐœŃ."
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please select media for backup..."
-msgstr "Калi ласĐșĐ°, Đ°Đ±ŃŃ€Ń‹Ń†Đ” ĐŒĐŸĐČу ĐŽĐ»Ń ĐșĐ°Ń€Ń‹ŃŃ‚Đ°ĐœĐœŃ."
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please select data to restore..."
-msgstr "Калi ласĐșĐ°, Đ°Đ±ŃŃ€Ń‹Ń†Đ” ĐŒĐŸĐČу ĐŽĐ»Ń ĐșĐ°Ń€Ń‹ŃŃ‚Đ°ĐœĐœŃ."
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "ĐĐ°ŃŃ‚ŃƒĐżĐœŃ‹Ń паĐșДты Đ±ŃƒĐŽŃƒŃ†ŃŒ ĐŽĐ°ĐŽĐ°ĐœŃ‹ ĐŽĐ° сiŃŃ‚ŃĐŒŃ‹"
+msgid "Use daemon"
+msgstr "IĐŒŃ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșу:"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
+msgid "Authentication"
+msgstr "ĐŃžŃ‚ŃĐœŃ‚Ń‹Ń„iĐșацыя"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Next"
-msgstr "бэĐșст"
+msgid "Additional CUPS servers: "
+msgstr "IP сДрĐČДра SMB"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Previous"
+msgid ""
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Save"
-msgstr "СтартаĐČĐ°Đ” ĐŒĐ”ĐœŃŽ"
+msgid "Where do you want to mount %s?"
+msgstr "КуЮы ĐČы жаЎаДцД ĐŒĐ°ĐœŃ†iраĐČаць ĐżŃ€Ń‹Đ»Đ°ĐŽŃƒ %s?"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Build Backup"
-msgstr "Đ”Ń€ŃĐœĐœŃ‹ фаĐčĐ» Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČĐ°Đč ĐșĐŸĐżii"
+msgid "Restore Via Network"
+msgstr "ĐŸĐ”Ń€Đ°ĐșĐ°ĐœŃ„iгураĐČаць лаĐșĐ°Đ»ŃŒĐœŃƒŃŽ сДтĐșу"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Restore Progress"
-msgstr "ĐĐŽĐœĐ°ŃžĐ»Đ”ĐœĐœĐ” Đ· фаĐčлу"
+msgid "Algeria"
+msgstr "ĐżĐ°ŃĐ»ŃĐŽĐŸŃžĐœĐ°Ń"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Restore From Catalog"
-msgstr "ДаЮатĐșĐŸĐČая таблiца разЎзДлаў"
+msgid "Initrd-size"
+msgstr "Initrd"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
-msgid "Browse to new restore repository."
+msgid ""
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid "CD in place - continue."
+msgid "\tBackups use tar and gzip\n"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Custom Restore"
-msgstr "Па ĐČŃ‹Đ±Đ°Ń€Ńƒ"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "2 MB"
+msgstr "2 ĐœĐ±"
-#: ../../standalone/drakbackup:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Restore all backups"
+msgid ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Restore Failed..."
-msgstr "ĐĐŽĐœĐ°ŃžĐ»Đ”ĐœĐœĐ” Đ· фаĐčлу"
+msgid "Setting Default Printer..."
+msgstr "ЛаĐșĐ°Đ»ŃŒĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Files Restored..."
+msgid "Interface %s (using module %s)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Path or Module required"
-msgstr ""
+msgid "Name: %s\n"
+msgstr "IĐŒŃ: %s\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Hostname required"
-msgstr "IĐŒŃ ĐŒĐ°ŃˆŃ‹ĐœŃ‹"
+msgid "Generating preview ..."
+msgstr "Đ’Ń‹Đ·ĐœĐ°Ń‡ŃĐœĐœĐ” прылаЎаў..."
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Username required"
-msgstr "IĐŒŃ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșу:"
+#: ../../network/network.pm:1
+#, c-format
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Password required"
-msgstr "ĐŸĐ°Ń€ĐŸĐ»ŃŒ"
+#: ../../mouse.pm:1
+#, c-format
+msgid "serial"
+msgstr "ĐżĐ°ŃĐ»ŃĐŽĐŸŃžĐœĐ°Ń"
-#: ../../standalone/drakbackup:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Host Path or Module"
+msgid "DVD-ROM"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Host Name"
-msgstr "IĐŒŃ ĐŒĐ°ŃˆŃ‹ĐœŃ‹"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Georgian (\"Latin\" layout)"
+msgstr "Đ“Ń€ŃƒĐ·iĐœŃĐși (\"ЛацiĐœŃĐșая\" расĐșлаЎĐșĐ°)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Restore Via Network Protocol: %s"
+msgid "Get the best items with Mandrake Linux Strategic partners"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Via Network"
-msgstr "ĐŸĐ”Ń€Đ°ĐșĐ°ĐœŃ„iгураĐČаць лаĐșĐ°Đ»ŃŒĐœŃƒŃŽ сДтĐșу"
-
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Restore From Tape"
-msgstr "ДаЮатĐșĐŸĐČая таблiца разЎзДлаў"
+msgid "Kenya"
+msgstr "КлаĐČiятура"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr ""
+msgid "Use ``Unmount'' first"
+msgstr "СпачатĐșу зрабiцД ``Unmount''"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing mtools packages..."
+msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” паĐșĐ”Ń‚Ńƒ %s"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "You must specify a root partition"
+msgstr "Вы паĐČiĐœĐœŃ‹ ĐŒĐ”Ń†ŃŒ разЎзДл swap"
+
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "first step creation"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ĐżĐ°ŃĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
+msgid "Both Shift keys simultaneously"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Restore From CD"
-msgstr "ĐĐŽĐœĐ°ŃžĐ»Đ”ĐœĐœĐ” Đ· ЮысĐșДты"
+msgid "Select a scanner model"
+msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” ĐČiЮэаĐșарту"
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Backup files not found at %s."
+msgid "LPRng - LPR New Generation"
msgstr ""
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid ""
-"Change\n"
-"Restore Path"
-msgstr "ĐĐŽĐœĐ°ŃžĐ»Đ”ĐœĐœĐ” Đ· фаĐčлу"
+msgid "Drakbackup Configuration"
+msgstr "ĐšĐ°ĐœŃ„iгурацыя сДтĐși"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"Restore Selected\n"
-"Files"
-msgstr "Đ’Ń‹ĐŽĐ°Đ»iць чаргу ЮруĐșу"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Save as.."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remove user directories before restore."
+msgid "Korea (North)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
+msgid "Autologin"
+msgstr "ĐŃžŃ‚Đ°ĐŒĐ°Ń‚Ń‹Ń‡ĐœŃ‹ ўĐČĐ°Ń…ĐŸĐŽ у сiŃŃ‚ŃĐŒŃƒ"
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
#, fuzzy, c-format
-msgid "select path to restore (instead of /)"
-msgstr "ĐșĐ°Đ»i ласĐșĐ°, ĐżĐ°Đ·ĐœĐ°Ń‡Ń†Đ” тып ĐČашаĐč ĐŒŃ‹ŃˆŃ‹."
+msgid "System configuration"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ°"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Restore Other"
-msgstr "ĐĐŽĐœĐ°ŃžĐ»Đ”ĐœĐœĐ” Đ· фаĐčлу"
+msgid "Domain Admin Password"
+msgstr "ПаЮцĐČДрЎзiць ĐżĐ°Ń€ĐŸĐ»ŃŒ"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Users"
-msgstr "ĐĐŽĐœĐ°ŃžĐ»Đ”ĐœĐœĐ” Đ· фаĐčлу"
+#: ../../share/advertising/05-desktop.pl:1
+#, c-format
+msgid ""
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Restore system"
-msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” сiŃŃ‚ŃĐŒŃ‹"
+msgid "Configuring printer ..."
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Other Media"
-msgstr "Đ†ĐœŃˆŃ‹Ń"
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid ""
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Select another media to restore from"
-msgstr "ĐșĐ°Đ»i ласĐșĐ°, ĐżĐ°Đ·ĐœĐ°Ń‡Ń†Đ” тып ĐČашаĐč ĐŒŃ‹ŃˆŃ‹."
+#: ../../common.pm:1
+#, c-format
+msgid "MB"
+msgstr "ĐœĐ±"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Please enter the directory where backups are stored"
+msgid "if set to yes, run some checks against the rpm database."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore from Hard Disk."
-msgstr "ĐĐŽĐœĐ°ŃžĐ»Đ”ĐœĐœĐ” Đ· ЮысĐșДты"
+#: ../../lang.pm:1
+#, c-format
+msgid "Virgin Islands (British)"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Use quota for backup files."
-msgstr "Đ”Ń€ŃĐœĐœŃ‹ фаĐčĐ» Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČĐ°Đč ĐșĐŸĐżii"
+msgid "Bermuda"
+msgstr "ĐŃĐŒĐ”Ń†Đși"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
+msgid "click here if you are sure."
msgstr ""
#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter the directory to save:"
-msgstr "Калі ласĐșĐ°, зрабіцД ĐœĐ”ĐșĐ°Đ»ŃŒĐșі рухаў ĐŒŃ‹ŃˆŃˆŃƒ."
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use Hard Disk to backup"
-msgstr "Đ”Ń€ŃĐœĐœŃ‹ фаĐčĐ» Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČĐ°Đč ĐșĐŸĐżii"
+#, c-format
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "please choose the date to restore"
-msgstr "ĐșĐ°Đ»i ласĐșĐ°, ĐżĐ°Đ·ĐœĐ°Ń‡Ń†Đ” тып ĐČашаĐč ĐŒŃ‹ŃˆŃ‹."
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"ДалДĐč Đ°ĐŽĐ·ĐœĐ°Ń‡Đ°ĐœŃ‹ усД Ń–ŃĐœŃƒŃŽŃ‡Ń‹Ń разЎзДлы Linux, Đ·ĐœĐŸĐčĐŽĐ·Đ”ĐœŃ‹Ń ĐœĐ° ĐČĐ°ŃˆŃ‹ĐŒ ЮысĐșу,\n"
+" яĐșія Đ·Ń€ĐŸĐ±Đ»Đ”ĐœŃ‹ ĐŒĐ°ĐčŃŃ‚Ń€Đ°ĐŒ ĐČŃ‹Đ»ŃƒŃ‡ŃĐœĐœŃ ЮысĐșаў. Вы ĐŒĐŸĐ¶Đ°Ń†Đ” паĐșŃ–ĐœŃƒŃ†ŃŒ іх таĐș і "
+"ĐČыĐșарыстўĐČаць\n"
+" ЎалДĐč, Đ±ĐŸ ŃĐœŃ‹ ĐŽĐŸĐ±Ń€Đ° ĐżĐ°ĐŽŃ‹Ń…ĐŸĐŽĐ·ŃŃ†ŃŒ ĐŽĐ»Ń Đ·ĐČычаĐčĐœĐ°ĐłĐ° ĐČыĐșĐ°Ń€Ń‹ŃŃ‚Đ°ĐœĐœŃ. Калі ĐČы\n"
+" ŃžĐœĐŸŃŃ–Ń†Đ” Đ·ĐŒĐ”ĐœŃ‹, ĐČы паĐČŃ–ĐœĐœŃ‹, ĐČŃ‹Đ»ŃƒŃ‡Ń‹Ń†ŃŒ хаця разЎзДл (\"/\"). РабіцД\n"
+" разЎзДл ĐœĐ” ĐČĐ”Đ»ŃŒĐŒŃ– ĐŒĐ°Đ»Ń‹ĐŒ, Đ±ĐŸ ў Đ°ĐŽĐČĐ°Ń€ĐŸŃ‚ĐœŃ‹ĐŒ ĐČыпаЮĐșу ĐČы ĐœŃ Đ·ĐŽĐŸĐ»Đ”Đ”Ń†Đ” ŃƒŃŃ‚Đ°Đ»ŃĐČаць\n"
+" ЮастатĐșĐŸĐČĐ° ĐżŃ€Đ°ĐłŃ€Đ°ĐŒĐœĐ°ĐłĐ° Đ·Đ°Đ±Đ”ŃĐżŃŃ‡ŃĐœĐœŃ.Калі ĐČы жаЎаДцД Đ·Đ°Ń…Đ°ĐČаць ĐČашыя "
+"ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń\n"
+" ĐœĐ° Đ°ŃĐŸĐ±ĐœŃ‹ĐŒ разЎзДлД, ĐČы паĐČŃ–ĐœĐœŃ‹ Đ°Đ±Ń€Đ°Ń†ŃŒ ĐżŃƒĐœĐșт ĐŒĐ°ĐœŃ†Ń–Ń€Đ°ĐČĐ°ĐœĐœŃ \"/home\".\n"
+"\n"
+"ĐšĐŸĐ¶ĐœŃ‹ разЎзДл ĐżĐ°Đ·ĐœĐ°Ń‡Đ°ĐœŃ‹ ĐœĐ°ŃŃ‚ŃƒĐżĐœŃ‹ĐŒ Ń‡Ń‹ĐœĐ°ĐŒ \"Đ†ĐŒŃ\", \"ĐĄĐČĐŸĐčстĐČы\".\n"
+"\n"
+"\n"
+"\"Đ†ĐŒŃ\" ĐșĐ°ĐŽĐ°ĐČĐ°ĐœĐ° таĐș - \"тып ЮысĐșу\", \"ĐœŃƒĐŒĐ°Ń€ ЮысĐșу\", \"ĐœŃƒĐŒĐ°Ń€ Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ\" \n"
+"(ĐœĐ°ĐżŃ€Ń‹ĐșлаЎ, \"hda1\").\n"
+"\n"
+"\n"
+"\"бып ЮысĐșу\" ĐșĐ°ĐŽĐ°ĐČĐ°ĐœŃ‹ яĐș \"hd\", Đșалі гэта IDE, і \"sd\" Đșалі SCSI.\n"
+" * \"Đ°\" \"master\" ĐœĐ° ĐżĐ”Ń€ŃˆĐ°ŃĐœŃ‹ĐŒ ĐșĐ°ĐœĐ°Đ»Đ” IDE \n"
+" * \"b\" \"slave\" ĐœĐ° ĐżĐ”Ń€ŃˆĐ°ŃĐœŃ‹ĐŒ ĐșĐ°ĐœĐ°Đ»Đ” IDE\n"
+" * \"c\" \"master\" ĐœĐ° ĐŽŃ€ŃƒĐłĐ°ŃĐœŃ‹ĐŒ ĐșĐ°ĐœĐ°Đ»Đ” IDE\n"
+" * \"d\" \"slave\" ĐœĐ° ĐŽŃ€ŃƒĐłĐ°ŃĐœŃ‹ĐŒ ĐșĐ°ĐœĐ°Đ»Đ” IDE\n"
+"\n"
+"\n"
+"Đ”Đ»Ń SCSI ЮысĐșаў - \"a\" гэта \"ĐżĐ”Ń€ŃˆĐ°ŃĐœŃ‹ Đ¶ĐŸŃ€ŃĐșі ЮысĐș\", \"b\" - \"ĐŽŃ€ŃƒĐłĐ°ŃĐœŃ‹ "
+"Đ¶ĐŸŃ€ŃĐșі ЮысĐș\", і Đł.ĐŽ."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, fuzzy, c-format
-msgid "Backup the system files before:"
-msgstr "Đ”Ń€ŃĐœĐœŃ‹ фаĐčĐ» Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČĐ°Đč ĐșĐŸĐżii"
+msgid "Remove"
+msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
+msgid "Lesotho"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../ugtk2.pm:1
#, c-format
-msgid "OK to restore the other files."
+msgid "utopia 25"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid " Restore Configuration "
-msgstr "ĐšĐ°ĐœŃ„iгурацыя сДтĐși"
-
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid " Successfuly Restored on %s "
+msgid "Pipe job into a command"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " All of your selected data have been "
+msgid "new dynamic device name generated by core kernel devfs"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Backup files are corrupted"
+msgid "Yes"
+msgstr "йаĐș"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Cote d'Ivoire"
msgstr ""
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "Which protocol do you want to use?"
+msgstr "ĐŻĐși пратаĐșĐŸĐ» ĐČы жаЎаДцД ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць?"
+
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Да яĐșĐŸĐłĐ° ĐżĐ°ŃĐ»ŃĐŽĐŸŃžĐœĐ°ĐłĐ° ĐżĐŸŃ€Ń‚Ńƒ ĐŽĐ°Đ»ŃƒŃ‡Đ°ĐœŃ‹ ĐŒĐ°ĐŽŃĐŒ?"
+msgid "Restore Progress"
+msgstr "ĐĐŽĐœĐ°ŃžĐ»Đ”ĐœĐœĐ” Đ· фаĐčлу"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Estonia"
+msgstr "Đ­ŃŃ‚ĐŸĐœŃĐși"
+
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"List of data corrupted:\n"
-"\n"
+msgid "Choose the host on which the local scanners should be made available:"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
#, c-format
msgid ""
-"List of data to restore:\n"
-"\n"
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
msgstr ""
+"Вы ĐŒĐ°Đ”Ń†Đ” ĐŽĐ·iрĐșу ў таблiцы раЎзДлаў, алД я ĐœĐ” ĐŒĐ°ŃŽ ĐŒĐ°ĐłŃ‡Ń‹ĐŒĐ°ŃŃ†i ŃĐ” сĐșарыстаць.\n"
+"АЎзiĐœŃ‹ ĐČыхаЮ у Ń‚Ń‹ĐŒ, Đșаб ĐżĐ”Ń€Đ°ĐŒŃŃŃ†iць ĐżĐ”Ń€ŃˆĐ°ŃĐœŃ‹Ń разЎзДлы таĐș, Đșаб ĐŽĐ·iрĐșĐ° iшла\n"
+"Đ°ĐŽŃ€Đ°Đ·Ńƒ Đ·Đ° ĐżĐ°ŃˆŃ‹Ń€Đ°ĐœŃ‹ĐŒ (extended) Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Đ°ĐŒ"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Channel"
+msgstr "ĐĐŽĐŒĐ”ĐœĐ°"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "\t-Network by webdav.\n"
-msgstr ""
+msgid "Add"
+msgstr "ДаЮаць"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "ĐĄŃƒĐŒĐ”ŃĐœĐ°Đ” IĐœŃ‚ŃŃ€ĐœŃŃ‚-Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ” зараз ĐŒĐ°ĐłŃ‡Ń‹ĐŒĐ°"
#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid " Error while sending mail. \n"
+msgstr "ĐŸĐ°ĐŒŃ‹Đ»ĐșĐ° Ń‡Ń‹Ń‚Đ°ĐœĐœŃ фаĐčлу %s"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr ""
+msgid "Keyboard"
+msgstr "КлаĐČiятура"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "\t-Network by SSH.\n"
+msgid ""
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "\t-Network by FTP.\n"
+msgid ""
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "\t-Tape \n"
-msgstr "бып: "
+msgid "Choose the connection you want to configure"
+msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” iĐœŃŃ‚Ń€ŃƒĐŒĐ”ĐœŃ‚, яĐși жаЎаДцД сĐșарыстаць"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "\t-CDROM.\n"
-msgstr ""
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Please wait, setting security level..."
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐși ŃžĐ·Ń€ĐŸŃžĐœŃ Đ±ŃŃĐżĐ”Đși"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "\t-Hard drive.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
+msgid "Configuring network device %s"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° сДтĐșĐ°ĐČĐ°Đč прылаЎы %s"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "activated"
+msgstr "АĐșŃ‚Ń‹ŃžĐœŃ‹"
+
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Please choose which network interface will be used for the dhcp server."
msgstr ""
+"Калi ласĐșĐ°, ĐżĐ°Đ·ĐœĐ°Ń‡Ń†Đ” сДтĐșĐ°ĐČы аЮаптар, яĐși ĐżĐ»Đ°ĐœŃƒĐ”Ń†Đ” ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць ĐŽĐ»Ń "
+"ĐŽĐ°Đ»ŃƒŃ‡ŃĐœĐœŃ ĐŽĐ° iĐœŃ‚ŃŃ€ĐœŃŃ‚"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
+msgid "Finding packages to upgrade..."
+msgstr "ĐŸĐŸŃˆŃƒĐș паĐșДтаў ĐŽĐ»Ń Đ°Đ±ĐœĐ°ŃžĐ»Đ”ĐœĐœŃ"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
+msgid "Mount point: "
+msgstr "ĐŸŃƒĐœĐșт ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ:"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "\tDo not include System Files\n"
+msgid "parse all fonts"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Опцыi"
+msgid "With X"
+msgstr "ЧаĐșĐ°ĐčцД"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid "Multi-head configuration"
+msgstr "Ń‡Ń‹Ń‚Đ°ĐœĐœĐ” ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐși"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "No browser available! Please install one"
+msgstr "Вы ĐŒĐŸĐ¶Đ°Ń†Đ” Đ°Đ±Ń€Đ°Ń†ŃŒ Ń–ĐœŃˆŃ‹Ń ĐŒĐŸĐČы, яĐșiя Đ±ŃƒĐŽŃƒŃ†ŃŒ ĐŽĐ°ŃŃ‚ŃƒĐżĐœŃ‹ ĐżĐ°ŃĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
+
+#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
"\n"
-"- Save via %s on host: %s\n"
+"%s"
msgstr ""
+"Щі жаЎаДцД Вы Đ·Đ°Ń…Đ°ĐČаць Đ·ĐŒŃĐœĐ”ĐœĐœŃ–?\n"
+"Бягучая ĐșĐ°ĐœŃ„Ń–ĐłŃƒŃ€Đ°Ń†Ń‹Ń:\n"
+"\n"
+"%s"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "\t\tErase=%s"
-msgstr ""
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "Вы ĐœĐ” ĐŒĐŸĐ¶Đ°Ń†Đ” разбiĐČаць ĐœĐ° разЎДлы, ĐżĐ°ĐŒĐ”Ń€ яĐșiх ĐŒĐ”ĐœĐ”Đč Đ·Đ° 32 ĐœĐ±"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"- Save to Tape on device: %s"
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
+"ПратаĐșĐŸĐ» rwho ĐŽĐ°Đ” ĐŒĐ°ĐłŃ‡Ń‹ĐŒĐ°ŃŃ†ŃŒ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°ĐŒ Đ°Ń‚Ń€Ń‹ĐŒĐ°Ń†ŃŒ спiс ўсiх\n"
+"ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșаў, уĐČĐ°ĐčŃˆĐŸŃžŃˆŃ‹Ń… ĐœĐ° ĐŒĐ°ŃˆŃ‹ĐœŃƒ, ĐČыĐșĐ°ĐœĐ°Ńž rwho ĐŽŃĐŒĐ°Đœ (ĐżĐ°ĐŽĐŸĐ±ĐœŃ‹ ĐœĐ° finger)."
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid " (multi-session)"
-msgstr ""
+msgid "Domain name"
+msgstr "IĐŒŃ ĐŽĐ°ĐŒĐ”ĐœŃƒ"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid " on device: %s"
-msgstr "Мыш: %s\n"
+msgid "Sharing of local printers"
+msgstr "Đ”Đ°ŃŃ‚ŃƒĐżĐœŃ‹Ń паĐșДты"
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "RW"
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Available printers"
+msgstr "Đ”Đ°ŃŃ‚ŃƒĐżĐœŃ‹Ń паĐșДты"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"- Burn to CD"
-msgstr ""
+msgid "Empty"
+msgstr "Пуста"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
-"- Delete hard drive tar files after backup.\n"
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
+"\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
+"\n"
+"\n"
+"\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
+msgid "text width"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
+msgid "Where do you want to mount device %s?"
+msgstr "КуЮы ĐČы жаЎаДцД ĐŒĐ°ĐœŃ†iраĐČаць ĐżŃ€Ń‹Đ»Đ°ĐŽŃƒ %s?"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"\n"
-"- User Files:\n"
+msgid "The default lease (in seconds)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Interface \"%s\""
+msgstr "ХДтĐșĐ°ĐČы iĐœŃ‚ŃŃ€Ń„Đ”Đčс"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"- System Files:\n"
+msgid "With basic documentation (recommended!)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
+#, fuzzy, c-format
+msgid "1 button"
+msgstr "2 ĐșĐœĐŸĐżĐși"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Backup Sources: \n"
+"There are %d unknown printers directly connected to your system"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid "Select user manually"
+msgid "Test"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Backup Users"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid direct root login."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Backup system"
-msgstr "Настр. фаĐčлаĐČых сiŃŃ‚ŃĐŒĐ°Ńž"
+msgid "Korea"
+msgstr "ĐŸĐ”Ń€Đ°ĐœĐŸŃ"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, fuzzy, c-format
-msgid "Please choose what you want to backup"
-msgstr "Выбар паĐșДтаў ĐŽĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
+msgid "Your choice? (default `%s'%s) "
+msgstr "Ваш ĐČыбар? (Đ·ĐŒĐŸŃžŃ‡Đ°ĐœĐœĐ” %s) "
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "on Tape Device"
-msgstr "ĐŸĐŸŃ€Ń‚ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
+msgid "Raw printer"
+msgstr "IĐŒŃ ЮруĐșарĐși"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "on CDROM"
+msgid "official vendor name of the cpu"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "across Network"
-msgstr "ХДтĐșĐ°:"
+msgid "Vendor"
+msgstr "АЎĐșат"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Interface %s"
+msgstr "ХДтĐșĐ°ĐČы iĐœŃ‚ŃŃ€Ń„Đ”Đčс"
+
+#: ../../steps.pm:1
#, c-format
-msgid "on Hard Drive"
+msgid "Configure mouse"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ĐŒŃ‹ŃˆŃ‹"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the mount points"
+msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” ĐżŃƒĐœĐșты ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ"
+
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "OK"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Please choose where you want to backup"
-msgstr "Выбар паĐșДтаў ĐŽĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
+msgid "Yugoslavian (latin)"
+msgstr "АзДрбаĐčĐŽĐ¶Đ°ĐœŃĐșі (latin)"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "More Options"
-msgstr "Опцыi ĐŒĐŸĐŽŃƒĐ»ŃŽ:"
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Installing"
+msgstr "УсталёўĐČĐ°Đ”ĐŒ"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "When"
-msgstr "З ĐșĐŸĐ»Đ°ĐŒ"
+#: ../../any.pm:1
+#, c-format
+msgid "Launch userdrake"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Where"
-msgstr "З ĐșĐŸĐ»Đ°ĐŒ"
+msgid "Is this an install or an upgrade?"
+msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” цi Đ°Đ±ĐœĐ°ŃžĐ»Đ”ĐœĐœĐ”"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "What"
-msgstr "ЧаĐșĐ°ĐčцД"
+msgid "ISDN card"
+msgstr "ĐŁĐœŃƒŃ‚Ń€Đ°ĐœĐ°Ń ISDN Đșарта"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Send mail report after each backup to:"
+msgid ""
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
+"\n"
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
+msgid "\t-Hard drive.\n"
+msgstr ""
+
+#: ../../help.pm:1
+#, c-format
msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
"\n"
-"Note that currently all 'net' medias also use the hard drive."
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
+msgid "Printer on remote CUPS server"
+msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ сДрĐČДр CUPS"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Калi ласĐșĐ°, Đ°Đ±ŃŃ€Ń‹Ń†Đ” ĐŒĐŸĐČу ĐŽĐ»Ń ĐșĐ°Ń€Ń‹ŃŃ‚Đ°ĐœĐœŃ."
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Выбар паĐșДтаў ĐŽĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
+msgid "delete"
+msgstr "Đ—Đœiшчыць"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "here if no."
+msgstr ""
+
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "Use daemon"
-msgstr "IĐŒŃ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșу:"
+msgid "DHCP host name"
+msgstr "IĐŒŃ ĐŒĐ°ŃˆŃ‹ĐœŃ‹"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "monthly"
+msgid "The maximum lease (in seconds)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "weekly"
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "Калi ласĐșĐ°, ĐżĐ°Đ·ĐœĐ°Ń‡Ń†Đ” ĐżĐŸŃĐ»ŃĐŽĐŸŃžĐœŃ‹ ĐżĐŸŃ€Ń‚, ĐŽĐ° яĐșĐŸĐłĐ° паЎĐșĐ»ŃŽŃ‡Đ°ĐœĐ° ĐČашая ĐŒŃ‹Ńˆ."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Did it work properly?"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
#, c-format
-msgid "daily"
+msgid "Poor"
+msgstr "Đ—ŃƒŃŃ–ĐŒ слабы"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The DHCP start range"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "hourly"
+msgid "Grenada"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "HardDrive / NFS"
+msgid "Unsafe"
+msgstr "ĐĐ”ĐœĐ°ĐŽĐ·Đ”ĐčĐœĐ°"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid ", %s sectors"
+msgstr ", %s сДĐșтараў"
+
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "No"
+msgstr "ĐĐ”"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "CDROM / DVDROM"
+msgid "Guadeloupe"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter the directory to save to:"
-msgstr "Калі ласĐșĐ°, зрабіцД ĐœĐ”ĐșĐ°Đ»ŃŒĐșі рухаў ĐŒŃ‹ŃˆŃˆŃƒ."
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "could not find any font.\n"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr "Выбар паĐșДтаў ĐŽĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
+#: ../../standalone/keyboarddrake:1
+#, c-format
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "Вы жаЎаДцД Đșаб BackSpace працаĐČаў у ĐșĐ°ĐœŃĐŸĐ»Ń– яĐș Delete?"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr "Выбар паĐșДтаў ĐŽĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
+#: ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Vertical refresh rate"
+msgstr "Đ§Đ°ŃŃ†Ń–ĐœŃ ĐČДртыĐșĐ°Đ»ŃŒĐœĐ°Đč Ń€Đ°Đ·ĐłĐŸŃ€Ń‚Đși"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "Выбар паĐșДтаў ĐŽĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#, c-format
+msgid "Entering step `%s'\n"
+msgstr "ĐŸĐ”Ń€Đ°Ń…ĐŸĐŽ ĐœĐ° ĐșŃ€ĐŸĐș `%s'\n"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please enter the device name to use for backup"
-msgstr ""
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Use tape to backup"
-msgstr "Đ”Ń€ŃĐœĐœŃ‹ фаĐčĐ» Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČĐ°Đč ĐșĐŸĐżii"
+msgid "Removing %s ..."
+msgstr "ĐŸĐ°ĐŒĐ”Ń€Ń‹ эĐșŃ€Đ°ĐœŃƒ: %s\n"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "No CD device defined!"
-msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” фаĐčĐ»"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
+msgid "Niger"
+msgstr "Đ’Ń‹ŃĐŸĐși"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "ĐĐ°Ń†Ń–ŃĐœŃ–Ń†Đ” ĐœĐ° разЎзДл"
+msgid "No printer"
+msgstr "IĐŒŃ ЮруĐșарĐși"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "ĐĐ°Ń†Ń–ŃĐœŃ–Ń†Đ” ĐœĐ° разЎзДл"
+msgid "alert configuration"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ°"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " Erase Now "
+msgid "NetWare Printer Options"
+msgstr "Опцыi ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ NetWare"
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "%s BootSplash (%s) preview"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "ĐĐ°Ń†Ń–ŃĐœŃ–Ń†Đ” ĐœĐ° разЎзДл"
+msgid "General"
+msgstr "ĐĐłŃƒĐ»ŃŒĐœŃ‹"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "ĐĐ°Ń†Ń–ŃĐœŃ–Ń†Đ” ĐœĐ° разЎзДл"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing system: "
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check for multisession CD"
-msgstr "ĐĐ°Ń†Ń–ŃĐœŃ–Ń†Đ” ĐœĐ° разЎзДл"
+#: ../../steps.pm:1
+#, c-format
+msgid "Add a user"
+msgstr "ДаЮаць ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "Калi ласĐșĐ°, Đ°Đ±ŃŃ€Ń‹Ń†Đ” тып ĐșлаĐČiятуры."
+msgid "Network configuration (%d adapters)"
+msgstr "ĐšĐ°ĐœŃ„iгурацыя сДтĐși"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
+msgid "Mandatory package %s is missing"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use CD/DVDROM to backup"
+msgid "Philippines"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
#, c-format
-msgid "Need hostname, username and password!"
-msgstr ""
+msgid "Ok"
+msgstr "ОĐș"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Remember this password"
-msgstr "ĐŃĐŒĐ° ĐżĐ°Ń€ĐŸĐ»ŃŽ"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Print Queue Name"
+msgstr "IĐŒŃ чаргi ЮруĐșу"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter your password"
-msgstr "ĐŸĐ°ŃĐżŃ€Đ°Đ±ŃƒĐčцД яшчэ раз"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "Вы жаЎаДцД ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць aboot?"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter your login"
-msgstr "ĐŸĐ°ŃĐżŃ€Đ°Đ±ŃƒĐčцД яшчэ раз"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "Đ‘Đ”Đ»Đ°Ń€ŃƒŃĐșі"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Please enter the host name or IP."
-msgstr "Калі ласĐșĐ°, зрабіцД ĐœĐ”ĐșĐ°Đ»ŃŒĐșі рухаў ĐŒŃ‹ŃˆŃˆŃƒ."
+msgid "Move files to the new partition"
+msgstr "ĐĐ” хапаД ĐżŃ€Đ°ŃŃ‚ĐŸŃ€Ń‹ ĐŽĐ»Ń стĐČĐ°Ń€ŃĐœĐœŃ ĐœĐŸĐČых разЎзДлаў"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
msgstr ""
#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore From Catalog"
+msgstr "ДаЮатĐșĐŸĐČая таблiца разЎзДлаў"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Pitcairn"
+msgstr "ĐŸŃ€Ń‹ĐœŃ‚ŃŃ€"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-" Transfer \n"
-"Now"
-msgstr ""
+msgid "IDE"
+msgstr "IDE"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "group :"
+msgstr "ĐŸŃ€Đ°Ń†ĐŸŃžĐœĐ°Ń група"
+
+#: ../../fs.pm:1
#, c-format
-msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
+msgid "mounting partition %s in directory %s failed"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Use Expect for SSH"
+msgid "Lilo screen"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid "Net Method:"
+msgid "LILO with graphical menu"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use network connection to backup"
-msgstr "Đ”Ń€ŃĐœĐœŃ‹ фаĐčĐ» Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČĐ°Đč ĐșĐŸĐżii"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Users"
-msgstr "IĐŒŃ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșу:"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Windows (FAT32)"
-msgstr "Đ’Ń‹ĐŽĐ°Đ»iць Windows(TM)"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Estimating"
+msgstr "ЧаĐșаДцца"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr ""
+msgid "You can't unselect this package. It is already installed"
+msgstr "Вы ĐœĐ” ĐŒĐŸĐ¶Đ°Ń†Đ” Đ°ĐŽĐŒŃĐœiць ĐČŃ‹Đ»ŃƒŃ‡ŃĐœĐœĐ” гэтага паĐșĐ”Ń‚Ńƒ. ĐĐœ ŃƒĐ¶ĐŸ ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœŃ‹"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Remove Selected"
-msgstr "Đ’Ń‹ĐŽĐ°Đ»iць чаргу ЮруĐșу"
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "SMB/Windows 95/98/NT"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do not include the browser cache"
-msgstr ""
+msgid "Go on anyway?"
+msgstr "Усё Ń€ĐŸŃžĐœĐ° працягĐČаць?"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "Выбар паĐșДтаў ĐŽĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "ĐŸŃ€Đ°ĐłĐ»ŃĐŽ ĐŽĐ°ŃŃ‚ŃƒĐżĐœŃ‹Ń… паĐșДтаў"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
+msgid "Does not appear to be recordable media!"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
+msgid "Specify options"
+msgstr "ĐŸĐ°Đ·ĐœĐ°Ń‡Ń†Đ” ĐżĐ°Ń€Đ°ĐŒĐ”Ń‚Ń€Ń‹"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use incremental backup (do not replace old backups)"
+msgid "Vanuatu"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Đ”Ń€ŃĐœĐœŃ‹ фаĐčĐ» Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČĐ°Đč ĐșĐŸĐżii"
-
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
+msgid "Either the server name or the server's IP must be given!"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
"\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
msgstr ""
+"З ĐŽĐ°ĐżĐ°ĐŒĐŸĐłĐ°Đč Đ·Đ°ĐłŃ€ŃƒĐ·Đ°Ń‡ĐœĐ°ĐłĐ° ЮысĐșĐ° ĐČы Đ·ĐŒĐŸĐ¶Đ°Ń†Đ” Đ·Đ°ĐłŃ€ŃƒĐ¶Đ°Ń†ŃŒ Linux ĐœĐ”Đ·Đ°Đ»Đ”Đ¶ĐœĐ° Đ°ĐŽ\n"
+" ŃŃ‚Đ°ĐœĐŽĐ°Ń€Ń‚ĐœĐ°ĐłĐ° Đ·Đ°ĐłŃ€ŃƒĐ·Ń‡Ń‹ĐșĐ°. Гэта ĐŒĐŸĐ¶Đ° Đ±Ń‹Ń†ŃŒ яĐșĐ°ŃĐœĐ°, ĐșĐ°Đ»i ĐČы ĐœĐ” жаЎаДцД \n"
+"ўсталёўĐČаць SILO, ĐșĐ°Đ»i iĐœŃˆĐ°Ń апДрацыĐčĐœĐ°Ń сiŃŃ‚ŃĐŒĐ° ĐČŃ‹ĐŽĐ°Đ»ŃĐ” SILO, цi SILO ĐœĐ” \n"
+"ĐŒĐŸĐ¶Đ° працаĐČаць у ĐČашаĐč ĐșĐ°ĐœŃ„iгурацыi. Đ—Đ°ĐłŃ€ŃƒĐ·Đ°Ń‡ĐœŃ‹ ЮысĐș таĐșŃĐ°ĐŒĐ° ĐŒĐŸĐ¶Đ° Đ±Ń‹Ń†ŃŒ \n"
+"ĐČыĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đœ ŃŃƒĐŒĐ”ŃĐœĐ° Đ· ĐČыратаĐČĐ°Đ»ŃŒĐœĐ°Đč ЮысĐșДтаĐč Mandrake Linux, яĐșая ĐČĐ”Đ»ŃŒĐŒi \n"
+"ĐżĐ°Đ»Đ”ĐłŃ‡Ń‹Ń†ŃŒ ĐČыратаĐČĐ°ĐœĐœĐ” сiŃŃ‚ŃĐŒŃ‹ ĐżĐ°ŃĐ»Ń Đ·Đ±ĐŸŃŽ.\n"
+"\n"
+"Калi жаЎаДцД стĐČарыць Đ·Đ°ĐłŃ€ŃƒĐ·Đ°Ń‡ĐœŃ‹ ЮысĐș зараз, ŃƒŃŃ‚Đ°ŃžŃ†Đ” ЮысĐșĐ”Ń‚Ńƒ ў ĐżĐ”Ń€ŃˆŃ‹\n"
+"ЮысĐșĐ°ĐČĐŸĐŽ i ĐœĐ°Ń†iŃĐœiцД \"Ok\"."
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
+msgid "You can't use an encrypted file system for mount point %s"
+msgstr ""
+"Đ’Đ°ĐŒ ĐœĐ”Đ°Đ±Ń…ĐŸĐŽĐœĐ° Đ·Đ°ĐŽĐ°Ń†ŃŒ праĐČiĐ»ŃŒĐœŃ‹ тып фаĐčлаĐČĐ°Đč сiŃŃ‚ŃĐŒŃ‹ (ext2, reiserfs)\n"
+"ĐŽĐ»Ń гэтаĐč ĐșŃ€ĐŸĐżĐși ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ\n"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Select the files or directories and click on 'Add'"
+msgid "Norfolk Island"
msgstr ""
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../standalone/drakboot:1
#, fuzzy, c-format
-msgid "File Selection"
-msgstr "Выбар групы паĐșДтаў"
+msgid "Theme installation failed!"
+msgstr "Клас ŃƒŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Can't create catalog!"
+msgid "Nothing to do"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid " Error while sending mail. \n"
-msgstr "ĐŸĐ°ĐŒŃ‹Đ»ĐșĐ° Ń‡Ń‹Ń‚Đ°ĐœĐœŃ фаĐčлу %s"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Use for loopback"
+msgstr "ВыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць ĐŽĐ»Ń ĐČiŃ€Ń‚ŃƒĐ°Đ»ŃŒĐœĐ°Đč фаĐčлаĐČĐ°Đč сiŃŃ‚ŃĐŒŃ‹"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
+msgid "use pppoe"
+msgstr "ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць pppoe"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Moving files to the new partition"
+msgstr "ĐĐ” хапаД ĐżŃ€Đ°ŃŃ‚ĐŸŃ€Ń‹ ĐŽĐ»Ń стĐČĐ°Ń€ŃĐœĐœŃ ĐœĐŸĐČых разЎзДлаў"
+
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s Đ· эĐșŃĐżĐ”Ń€Ń‹ĐŒĐ”ĐœŃ‚Đ°Đ»ŃŒĐœĐ°Đč ĐżĐ°ĐŽŃ‚Ń€Ń‹ĐŒĐșĐ°Đč 3D-пасĐșĐ°Ń€ŃĐœĐœŃ"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1
#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
+msgid "Advanced"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"file list sent by FTP: %s\n"
-" "
+msgid "Transfer"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "No changes to backup!"
-msgstr "Đ”Ń€ŃĐœĐœŃ‹ фаĐčĐ» Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČĐ°Đč ĐșĐŸĐżii"
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak (US)"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Đ”Ń€ŃĐœĐœŃ‹ фаĐčĐ» Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČĐ°Đč ĐșĐŸĐżii"
+msgid "More Options"
+msgstr "Опцыi ĐŒĐŸĐŽŃƒĐ»ŃŽ:"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Backup Other files..."
-msgstr "Đ”Ń€ŃĐœĐœŃ‹ фаĐčĐ» Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČĐ°Đč ĐșĐŸĐżii"
+msgid "Afghanistan"
+msgstr "IŃ€Đ°ĐœŃĐși"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hard Disk Backup Progress..."
+msgid "Delete Hard Drive tar files after backup to other media."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup User files..."
-msgstr "Đ”Ń€ŃĐœĐœŃ‹ фаĐčĐ» Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČĐ°Đč ĐșĐŸĐżii"
-
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Backup system files..."
+msgid ""
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
msgstr ""
+"cron - ŃŃ‚Đ°ĐœĐŽĐ°Ń€Ń‚ĐœĐ°Ń UNIX ĐżŃ€Đ°ĐłŃ€Đ°ĐŒĐ°, яĐșая ĐČыĐșĐŸĐœĐČĐ°Đ” ĐżŃ€Đ°ĐłŃ€Đ°ĐŒŃ‹ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°\n"
+"праз ĐżĐ°Đ·ĐœĐ°Ń‡Đ°ĐœŃ‹Ń ĐżĐ”Ń€Ń‹ŃĐŽŃ‹ часу. Vixie cron ĐŽĐ°ĐŽĐ°Đ” раЮ ĐŽĐ°ĐżĐ°ŃžĐœĐ”ĐœĐœŃŃž ĐŽĐ° "
+"ŃŃ‚Đ°ĐœĐŽĐ°Ń€Ń‚ĐœĐ°ĐłĐ°\n"
+"UNIX cron, уĐșлючаючы Đ»Đ”ĐżŃˆŃ‹ ŃžĐ·Ń€ĐŸĐČĐ”ĐœŃŒ Đ±ŃŃĐżĐ”Đși i ĐŒĐŸŃ†ĐœŃ‹Ń ĐșĐ°ĐœŃ„iгурацыĐčĐœŃ‹Ń ĐŸĐżŃ†Ń‹i."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "No tape in %s!"
+msgid "Burundi"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Permission problem accessing CD."
+msgid "Add Client -->"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "This may take a moment to erase the media."
-msgstr ""
+msgid "Read carefully!"
+msgstr "ЧытаĐčцД ўĐČажлiĐČĐ°!"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Not erasable media!"
+msgid "RW"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Does not appear to be recordable media!"
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "No CDR/DVDR in drive!"
-msgstr ""
+msgid "Port"
+msgstr "ĐŸĐŸŃ€Ń‚"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "WebDAV transfer failed!"
+msgid "No (experts only)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "WebDAV remote site already in sync!"
+msgid "No kernel selected!"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Total progess"
-msgstr "ПраĐČДрĐșĐ° ĐżĐ°Ń€Ń‚ĐŸŃž"
-
-#: ../../standalone/drakbackup:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
-"\n"
-"without being prompted for a password."
-msgstr ""
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Press enter to boot the selected OS, 'e' to edit the"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "%s not responding"
+msgid "Set-GID"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Can't find %s on %s"
-msgstr "ĐŸĐ°ĐŒŃ‹Đ»ĐșĐ° Đ°ĐŽĐșрыцця %s ĐŽĐ»Ń Đ·Đ°Đżiсу: %s"
+msgid "The encryption keys do not match"
+msgstr "ĐŸĐ°Ń€ĐŸĐ»i ĐœĐ” супаЮаюць"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Permission denied transferring %s to %s"
+msgid "Right \"Windows\" key"
msgstr ""
#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Bad password on %s"
-msgstr "ĐŃĐŒĐ° ĐżĐ°Ń€ĐŸĐ»ŃŽ"
-
-#: ../../standalone/drakbackup:1
#, c-format
-msgid "No password prompt on %s at port %s"
+msgid "CDROM / DVDROM"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "ERROR: Cannot spawn %s."
+msgid "if set to yes, check empty password in /etc/shadow."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
-msgid "This may take a moment to generate the keys."
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"%s exists, delete?\n"
+"Here is a list of the available printing options for the current printer:\n"
"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolutions"
+msgstr "ĐŸĐ°ĐŒĐ”Ń€Ń‹ эĐșŃ€Đ°ĐœŃƒ"
+
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
+"drakfirewall configurator\n"
"\n"
-" DrakBackup Report Details\n"
-"\n"
-"\n"
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"Please enter your username, password and domain name to access this host."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Remove selected host"
+msgstr "Đ’Ń‹ĐŽĐ°Đ»iць чаргу ЮруĐșу"
+
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Network configuration"
+msgstr "ĐšĐ°ĐœŃ„iгурацыя сДтĐși"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "No sharing"
+msgstr "ЧаĐșаДцца"
+
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
+msgid "Move selected rule down one level"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "INFO"
+msgid "TB"
msgstr ""
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "FATAL"
-msgstr "FAT"
+msgid "Please check if you are using a DVDR device"
+msgstr "ĐĐ°Ń†Ń–ŃĐœŃ–Ń†Đ” ĐœĐ° разЎзДл"
#: ../../standalone/drakbackup:1
-#, c-format
-msgid "WARNING"
-msgstr ""
+#, fuzzy, c-format
+msgid "FATAL"
+msgstr "FAT"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Cron not available yet as non-root"
+msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
+"\n"
+"The network address is %s using a netmask of %s.\n"
+"\n"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” %s ĐœĐ” Đ°Ń‚Ń€Ń‹ĐŒĐ°Đ»Đ°ŃŃ. ĐŁĐ·ĐœiĐșла ĐœĐ°ŃŃ‚ŃƒĐżĐœĐ°Ń ĐżĐ°ĐŒŃ‹Đ»ĐșĐ°:"
+msgid "Delete"
+msgstr "Đ—Đœiшчыць"
-#: ../../standalone/drakboot:1
+#: ../../security/help.pm:1
#, c-format
-msgid "No, I don't want autologin"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid reboot by the console user."
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
+msgid ""
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
msgstr ""
+"ĐœĐŸĐ¶ĐœĐ° ĐœĐ°ŃŃ‚Ń€ĐŸiць сiŃŃ‚ŃĐŒŃƒ ĐŽĐ»Ń Đ°ŃžŃ‚Đ°ĐŒĐ°Ń‚Ń‹Ń‡ĐœĐ°ĐłĐ° запусĐșу X ĐżĐ°ŃĐ»Ń старту сiŃŃ‚ŃĐŒŃ‹.\n"
+"ЖаЎаДцД, Đșаб X стартаĐČаў пры Ń€ŃŃŃ‚Đ°Ń€Ń†Đ”?"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Launch the graphical environment when your system starts"
+msgid "Build the disk"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnect %s"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ISDN"
+
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "System mode"
+msgid "Status:"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Bootsplash"
-msgstr ""
+msgid "HTTP proxy"
+msgstr "HTTP proxy"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "SSH Server"
+msgstr "NIS сДрĐČДр:"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lilo screen"
+msgid "\t-Network by rsync.\n"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "European protocol"
+msgstr "Đ•ŃžŃ€ĐŸĐżĐ° (EDSS1)"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
+msgid ", printer \"%s\" on server \"%s\""
msgstr ""
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid "Themes"
-msgstr "ДрэĐČĐ°"
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
+#, c-format
+msgid "Error"
+msgstr "ĐŸĐ°ĐŒŃ‹Đ»ĐșĐ°"
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid "Splash selection"
-msgstr "Асабiсты ĐČыбар паĐșДтаў"
+#: ../../any.pm:1
+#, c-format
+msgid "allow \"su\""
+msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, fuzzy, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr "ĐĄŃƒĐŒĐ”ŃĐœĐ°Đ” IĐœŃ‚ŃŃ€ĐœŃŃ‚-Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ”"
+msgid "Australia"
+msgstr "ĐżĐ°ŃĐ»ŃĐŽĐŸŃžĐœĐ°Ń"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
+msgid "please wait during ttmkfdir..."
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, fuzzy, c-format
-msgid "Theme installation failed!"
-msgstr "Клас ŃƒŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
+msgid "Configure only card \"%s\"%s"
+msgstr "ĐšĐ°ĐœŃ„iгураĐČаць ĐŒĐ°ŃŽ Đșарту"
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Notice"
-msgstr "ĐłĐ°Đ»ŃŒŃˆŃ‚ŃƒĐș"
+msgid "Level"
+msgstr "ŃƒĐ·Ń€ĐŸĐČĐ”ĐœŃŒ"
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "Relaunch 'lilo'"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Change the printing system"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° сДтĐși"
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
-msgstr ""
-
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr ""
+msgid "Configure services"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ŃĐ»ŃƒĐ¶Đ±Đ°Ńž"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+msgid "Broadcast Address:"
msgstr ""
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid "Write %s"
-msgstr "ХДрĐČДр XFree86 %s"
-
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr ""
+msgid "mount failed: "
+msgstr "ĐżĐ°ĐŒŃ‹Đ»ĐșĐ° ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ: "
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Lilo message not found"
+msgid ""
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Copy %s to %s"
-msgstr ""
+msgid "Image"
+msgstr "Đ’ĐŸĐ±Ń€Đ°Đ·"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Backup %s to %s.old"
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
#, fuzzy, c-format
-msgid "Create new theme"
-msgstr "СтĐČĐ°Ń€ŃĐœĐœĐ” ĐœĐŸĐČага Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ"
+msgid "Remote Administration"
+msgstr "Опцыi Đ°ĐŽĐŽĐ°Đ»Đ”ĐœĐ°ĐłĐ° ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ lpd"
-#: ../../standalone/drakboot:1
+#: ../../modules.pm:1
#, c-format
msgid ""
-"Display theme\n"
-"under console"
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Install themes"
-msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” сiŃŃ‚ŃĐŒŃ‹"
+msgid "Selected All"
+msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” фаĐčĐ»"
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid "Lilo/grub mode"
-msgstr "Đ ŃĐ¶Ń‹ĐŒ Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ"
+#: ../../printer/data.pm:1
+#, c-format
+msgid "CUPS - Common Unix Printing System"
+msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Yaboot mode"
-msgstr "Đ—Đ°ĐłŃ€ŃƒĐ·Đ°Ń‡ĐœĐ°Ń прылаЎа"
+msgid "Webmin Service"
+msgstr "прылаЎа"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "<control>Q"
-msgstr ""
+msgid "device"
+msgstr "прылаЎа"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "/File/_Quit"
-msgstr ""
+msgid "All"
+msgstr "Усё"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "/_File"
-msgstr "ЀаĐčлы:\n"
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "ĐŻĐșую сiŃŃ‚ŃĐŒŃƒ ЮруĐșу Вы жаЎаДцД ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць?"
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, fuzzy, c-format
-msgid "Boot Style Configuration"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ĐŒĐ°ĐŽŃĐŒŃƒ"
+msgid "Greece"
+msgstr "ГрэчасĐși"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "No browser available! Please install one"
-msgstr "Вы ĐŒĐŸĐ¶Đ°Ń†Đ” Đ°Đ±Ń€Đ°Ń†ŃŒ Ń–ĐœŃˆŃ‹Ń ĐŒĐŸĐČы, яĐșiя Đ±ŃƒĐŽŃƒŃ†ŃŒ ĐŽĐ°ŃŃ‚ŃƒĐżĐœŃ‹ ĐżĐ°ŃĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "An error occurred"
+msgstr "ĐĐŽĐ±Ń‹Đ»Đ°ŃŃ ĐżĐ°ĐŒŃ‹Đ»ĐșĐ°"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "connecting to Bugzilla wizard ..."
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
msgstr ""
+"Гэты паĐșДт паĐČiĐœĐ”Đœ Đ±Ń‹Ń†ŃŒ Đ°Đ±ĐœĐŸŃžĐ»Đ”ĐœŃ‹\n"
+"Вы ŃžĐżŃŃžĐœĐ”ĐœŃ‹, ŃˆŃ‚ĐŸ Ń…ĐŸŃ‡Đ°Ń†Đ” Đ°ĐŽĐŒŃĐœiць ĐČŃ‹Đ»ŃƒŃ‡ŃĐœĐœĐ”?"
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Package not installed"
-msgstr "ЗаĐșĐ°ĐœŃ‡ŃĐœĐœĐ” ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
+msgid "Tamil (Typewriter-layout)"
+msgstr "ĐŃ€ĐŒŃĐœŃĐși (typewriter)"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Not installed"
-msgstr "ЗаĐșĐ°ĐœŃ‡ŃĐœĐœĐ” ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
+#: ../../standalone/drakautoinst:1
+#, c-format
+msgid "manual"
+msgstr ""
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Standalone Tools"
-msgstr "ĐšĐ°ĐœŃĐŸĐ»ŃŒĐœŃ‹Ń Ń–ĐœŃŃ‚Ń€ŃƒĐŒĐ”ĐœŃ‚Đ°Đ»ŃŒĐœŃ‹Ń ŃŃ€ĐŸĐŽĐșі"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer manufacturer, model, driver"
+msgstr ""
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Report"
-msgstr "ĐŸĐŸŃ€Ń‚"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
-"\n"
+"Directory %s already contains data\n"
+"(%s)"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Release: "
-msgstr "Калi ласĐșĐ°, пачаĐșĐ°ĐčцД"
+msgid "Printer on NetWare server"
+msgstr "ХДрĐČДр ЮруĐșу"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Kernel:"
-msgstr ""
+msgid "Give the ram size in MB"
+msgstr "ĐŸĐ°Đ·ĐœĐ°Ń‡Ń†Đ” ĐżĐ°ĐŒĐ”Ń€ RAM у Mб"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Package: "
-msgstr "ПаĐșДт"
+#: ../../any.pm:1
+#, c-format
+msgid "Real name"
+msgstr "ĐŁĐ»Đ°ŃĐœĐ°Đ” iĐŒŃ"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Application:"
-msgstr "Đ Đ°Đ·ĐŒĐ”Ń€ĐșĐ°ĐČĐ°ĐœĐœĐ”"
+msgid "done"
+msgstr "Đ—Ń€ĐŸĐ±Đ»Đ”ĐœĐ°"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Configuration Wizards"
-msgstr "ĐšĐ°ĐœŃ„iгурацыя сДтĐși"
+msgid "Please uncheck or remove it on next time."
+msgstr "Да яĐșĐŸĐłĐ° ĐżĐ°ŃĐ»ŃĐŽĐŸŃžĐœĐ°ĐłĐ° ĐżĐŸŃ€Ń‚Ńƒ ĐŽĐ°Đ»ŃƒŃ‡Đ°ĐœŃ‹ ĐŒĐ°ĐŽŃĐŒ?"
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Userdrake"
-msgstr "ВыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць DiskDrake"
+msgid "Higher"
+msgstr "Đ’Ń‹ŃĐŸĐși"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Windows Migration tool"
-msgstr "НаĐČуĐșĐŸĐČыя прыĐșĐ»Đ°ĐŽĐ°ĐœĐœŃ–"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the partitions you want to format"
+msgstr "Выбар разЎзДлаў ĐŽĐ»Ń Ń„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœŃ"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Urpmi"
+msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Software Manager"
-msgstr "IĐŒŃ ĐŽĐ»Ń Ń€Đ°Đ·ĐŒĐ”Ń€ĐșĐ°ĐČĐ°ĐœĐ°ĐłĐ° рэсурсу"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Remote Control"
-msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Msec"
-msgstr "ĐŸĐŸŃ€Ń‚ ĐŒŃ‹ŃˆŃ‹"
-
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Menudrake"
-msgstr "абаĐČŃĐ·ĐșĐŸĐČĐ°"
+msgid "Can't find %s on %s"
+msgstr "ĐŸĐ°ĐŒŃ‹Đ»ĐșĐ° Đ°ĐŽĐșрыцця %s ĐŽĐ»Ń Đ·Đ°Đżiсу: %s"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Mandrake Online"
-msgstr "Đ”Đ°Đ»ŃƒŃ‡ŃĐœĐœĐ” ĐŽĐ° IĐœŃ‚ŃŃ€ĐœŃŃ‚Ńƒ"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Japanese 106 keys"
+msgstr "ĐŻĐżĐŸĐœŃĐși 106 ĐșлаĐČiш"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "HardDrake"
+msgid "This will take a few minutes."
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Synchronization tool"
+msgid "Burkina Faso"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "First Time Wizard"
+msgid "Use scanners on remote computers"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Mandrake Control Center"
-msgstr "Đ”Đ°Đ»ŃƒŃ‡ŃĐœĐœĐ” ĐŽĐ° IĐœŃ‚ŃŃ€ĐœŃŃ‚Ńƒ"
-
-#: ../../standalone/drakbug:1
-#, c-format
-msgid "Mandrake Bug Report Tool"
-msgstr ""
+msgid "Delete selected rule"
+msgstr "Đ’Ń‹ĐŽĐ°Đ»iць чаргу ЮруĐșу"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Parameters"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Accessing printers on remote CUPS servers"
+msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ сДрĐČДр CUPS"
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Internet Connection Configuration"
-msgstr "IĐœŃ‚ŃŃ€ĐœŃŃ‚ Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ” i ĐșĐ°ĐœŃ„iгурацыя"
+msgid "Insert a floppy in %s"
+msgstr "УстаўцД ЮысĐșĐ”Ń‚Ńƒ ў ЮысĐșĐ°ĐČĐŸĐŽ %s"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "DHCP Client"
+msgid "Maldives"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "Ethernet Card"
-msgstr ""
+msgid "compact"
+msgstr "ĐșĐ°ĐŒĐżĐ°ĐșŃ‚ĐœĐ°"
-#: ../../standalone/drakconnect:1
+#: ../../common.pm:1
#, c-format
-msgid "Gateway"
-msgstr "Клюз"
-
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connection type: "
-msgstr "IĐŒŃ Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ"
-
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "Profile: "
-msgstr "ĐżĐ°ĐŒŃ‹Đ»ĐșĐ° ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ: "
+msgid "1 minute"
+msgstr "1 хĐČiĐ»iĐœĐ°"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Internet connection configuration"
-msgstr "IĐœŃ‚ŃŃ€ĐœŃŃ‚ Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ” i ĐșĐ°ĐœŃ„iгурацыя"
+msgid "on channel %d id %d\n"
+msgstr "ĐœĐ° ŃˆŃ‹ĐœĐ” %d id %d\n"
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
+msgid ", multi-function device"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
+msgid "Laos"
msgstr ""
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "activate now"
-msgstr "АĐșŃ‚Ń‹ŃžĐœŃ‹"
-
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, fuzzy, c-format
-msgid "deactivate now"
-msgstr "АĐșŃ‚Ń‹ŃžĐœŃ‹"
-
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "DHCP client"
+msgid "There is no FAT partition to resize (or not enough space left)"
msgstr ""
+"ĐĐ” Đ·ĐœĐŸĐčĐŽĐ·Đ”ĐœĐ° разЎзДлаў FAT ĐŽĐ»Ń Đ·ĐŒŃĐœĐ”ĐœĐœŃ ĐżĐ°ĐŒĐ”Ń€Đ°Ńž Đ°Đ»ŃŒĐ±ĐŸ ĐČыĐșĐ°Ń€Ń‹ŃŃ‚Đ°ĐœĐœŃ\n"
+"ў яĐșасцi ĐČiŃ€Ń‚ŃƒĐ°Đ»ŃŒĐœĐ°Đč фаĐčлаĐČĐ°Đč сiŃŃ‚ŃĐŒŃ‹ (цi ĐœĐ”ĐŽĐ°ŃŃ‚Đ°Ń‚ĐșĐŸĐČĐ° ĐżŃ€Đ°ŃŃ‚ĐŸŃ€Ń‹ ĐœĐ° ЮысĐșу)"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Started on boot"
+msgid "Up"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Boot Protocol"
+msgid "Firewall"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Adapter %s: %s"
+msgid "Area:"
msgstr ""
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "LAN Configuration"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ°"
-
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "LAN configuration"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ADSL"
-
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
+msgid "(E)IDE/ATA controllers"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Connect..."
-msgstr ""
+msgid "Printer Server"
+msgstr "ХДрĐČДр ЮруĐșу"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Disconnect..."
+msgid "Disconnection from the Internet complete."
msgstr ""
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Not connected"
-msgstr "Đ Đ°Đ·ĐŒĐ”Ń€ĐșĐ°ĐČĐ°ĐœĐœĐ”"
-
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Connected"
-msgstr "IĐŒŃ Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ"
+msgid "Custom configuration"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ°"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface:"
+msgid "Saint Pierre and Miquelon"
msgstr ""
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Gateway:"
-msgstr "Клюз:"
-
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Apply"
-msgstr "ĐŸŃ€ĐžĐŒĐ”ĐœĐžŃ‚ŃŒ"
-
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Click here to launch the wizard ->"
+msgid ""
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
msgstr ""
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Wizard..."
-msgstr "МаĐčстар стĐČĐ°Ń€ŃĐœĐœŃ..."
-
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Status:"
+msgid "saving Bootsplash theme..."
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Type:"
-msgstr "бып: "
+msgid "Portugal"
+msgstr "ĐŸĐŸŃ€Ń‚"
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Internet access"
-msgstr ""
+msgid "Do you have another one?"
+msgstr "ĐŠi ёсць у ĐČас iĐœŃˆŃ‹?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Hostname: "
-msgstr "IĐŒŃ ĐŒĐ°ŃˆŃ‹ĐœŃ‹"
+msgid ", printing to %s"
+msgstr "ĐŸĐ°ĐŒŃ‹Đ»ĐșĐ° Đ·Đ°Đżiсу ў фаĐčĐ» %s"
-#: ../../standalone/drakconnect:1
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "Configure Local Area Network..."
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° лаĐșĐ°Đ»ŃŒĐœĐ°Đč сДтĐși"
+msgid "Assign host name from DHCP address"
+msgstr "Калі ласĐșĐ°, зрабіцД ĐœĐ”ĐșĐ°Đ»ŃŒĐșі рухаў ĐŒŃ‹ŃˆŃˆŃƒ."
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "State"
-msgstr "СтартаĐČĐ°Đ” ĐŒĐ”ĐœŃŽ"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Toggle to normal mode"
+msgstr "ЗĐČычаĐčĐœŃ‹ Ń€ŃĐ¶Ń‹ĐŒ"
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Generic"
+msgstr "ĐĐłŃƒĐ»ŃŒĐœŃ‹"
+
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Driver"
-msgstr "сДрĐČДр"
+msgid "Cylinder %d to %d\n"
+msgstr "ĐŠŃ‹Đ»iĐœĐŽŃ€Ń‹ Đ· %d па %d\n"
#: ../../standalone/drakconnect:1
#, c-format
-msgid "Protocol"
+msgid "New profile..."
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Which disk do you want to move it to?"
+msgstr "На яĐși ЮысĐș ĐżĐ”Ń€Đ°ĐœĐ”ŃŃ†Ń–?"
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "Display logo on Console"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Interface"
-msgstr "ХДтĐșĐ°ĐČы iĐœŃ‚ŃŃ€Ń„Đ”Đčс"
+msgid "Windows Domain"
+msgstr "НаĐČуĐșĐŸĐČыя прыĐșĐ»Đ°ĐŽĐ°ĐœĐœŃ–"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "Configure Internet Access..."
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ŃĐ»ŃƒĐ¶Đ±Đ°Ńž"
+msgid "Interface %s (on network %s)"
+msgstr "ХДтĐșĐ°ĐČы iĐœŃ‚ŃŃ€Ń„Đ”Đčс"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Wait please"
+msgid "INFO"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
+msgid "Wallis and Futuna"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "New profile..."
+msgid "Need to create /etc/dhcpd.conf first!"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Profile to delete:"
+msgid "Is FPU present"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Del profile..."
+msgid "There are no scanners found which are available on your system.\n"
msgstr ""
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "ĐšĐ°ĐœŃ„iгурацыя сДтĐși"
-
-#: ../../standalone/drakedm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
+"No additional information\n"
+"about this service, sorry."
msgstr ""
-#: ../../standalone/drakedm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Choosing a display manager"
+msgid "Build Single NIC -->"
msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
+msgid "Is this correct?"
+msgstr "Гэта ĐŽĐ°ĐșĐ»Đ°ĐŽĐœĐ°?"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Marshall Islands"
msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Unable to fork: %s"
-msgstr "Зрабiць ĐœĐ”Đ°ĐșŃ‚Ń‹ŃžĐœŃ‹ĐŒ сДтĐșĐ°ĐČĐ°Đ” Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ”"
+msgid "Windows (FAT32)"
+msgstr "Đ’Ń‹ĐŽĐ°Đ»iць Windows(TM)"
-#: ../../standalone/drakfloppy:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
-msgstr ""
+msgid "Root password"
+msgstr "ĐŸĐ°Ń€ĐŸĐ»ŃŒ ĐŽĐ»Ń root"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Be sure a media is present for the device %s"
+msgid "Build All Kernels -->"
msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Build the disk"
+msgid "if set to yes, report unowned files."
msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Output"
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
msgstr ""
+"ĐŃĐŒĐ° разЎзДла swap.\n"
+"\n"
+"Усё Đ°ĐŽĐœĐŸ працягĐČаць?"
-#: ../../standalone/drakfloppy:1
-#, fuzzy, c-format
-msgid "Remove a module"
-msgstr "АЎĐČĐ°Ń€ĐŸŃ‚ĐœŃ‹ параЮаĐș ŃŃ‚Đ°Ń€ĐŸĐœĐ°Đș"
-
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Add a module"
-msgstr "ДаЮаць ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°"
+msgid "Server IP missing!"
+msgstr "IĐŒŃ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
-#: ../../standalone/drakfloppy:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "omit scsi modules"
-msgstr "Đ ŃĐ¶Ń‹ĐŒ Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ"
+msgid "Suriname"
+msgstr "IĐŒŃ ĐŽĐ»Ń Ń€Đ°Đ·ĐŒĐ”Ń€ĐșĐ°ĐČĐ°ĐœĐ°ĐłĐ° рэсурсу"
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
#, c-format
-msgid "if needed"
+msgid "Enable ACPI"
msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../help.pm:1
#, c-format
-msgid "omit raid modules"
+msgid "Graphical Environment"
msgstr ""
-#: ../../standalone/drakfloppy:1
-#, fuzzy, c-format
-msgid "force"
-msgstr "ĐŸĐ”Ń€Đ°ĐœĐŸŃ"
-
-#: ../../standalone/drakfloppy:1
+#: ../../lang.pm:1
#, c-format
-msgid "mkinitrd optional arguments"
+msgid "Gibraltar"
msgstr ""
-#: ../../standalone/drakfloppy:1
-#, fuzzy, c-format
-msgid "Expert Area"
-msgstr "Đ­ĐșспДрт"
-
-#: ../../standalone/drakfloppy:1
-#, fuzzy, c-format
-msgid "kernel version"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ Đ· IĐœŃ‚ŃŃ€ĐœŃŃ‚Đ°ĐŒ"
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "default"
-msgstr "Па ĐŽĐ°ĐŒĐ°ŃžĐ»Đ”ĐœĐœŃŽ"
-
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "General"
-msgstr "ĐĐłŃƒĐ»ŃŒĐœŃ‹"
+msgid "on Tape Device"
+msgstr "ĐŸĐŸŃ€Ń‚ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
-#: ../../standalone/drakfloppy:1
+#: ../../network/modem.pm:1
#, fuzzy, c-format
-msgid "boot disk creation"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ĐżĐ°ŃĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
+msgid "Do nothing"
+msgstr "ЧаĐșаДцца"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "drakfloppy"
-msgstr "ĐĐŽĐœĐ°ŃžĐ»Đ”ĐœĐœĐ” Đ· ЮысĐșДты"
+msgid "Delete Client"
+msgstr "Đ—Đœiшчыць"
-#: ../../standalone/drakfloppy:1
-#, fuzzy, c-format
-msgid "Size"
-msgstr "ĐŸĐ°ĐŒĐ”Ń€: %s"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Filesystem type: "
+msgstr "бып фаĐčлаĐČĐ°Đč сiŃŃ‚ŃĐŒŃ‹:"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Module name"
-msgstr "Опцыi ĐŒĐŸĐŽŃƒĐ»ŃŽ:"
+msgid "Starting network..."
+msgstr "ĐŻĐși тып ĐČашага ISDN Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ?"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Post Uninstall"
-msgstr "ЗаĐșĐ°ĐœŃ‡ŃĐœĐœĐ” ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
+#: ../../lang.pm:1
+#, c-format
+msgid "Vietnam"
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Remove fonts on your system"
-msgstr "ĐŁ ĐČашаĐč ŃŃ–ŃŃ‚ŃĐŒĐ” ĐœŃĐŒĐ° ĐœiĐČĐŸĐŽĐœĐ°ĐłĐ° сДтĐșĐ°ĐČага аЮаптара!"
+msgid "/_Fields description"
+msgstr "АпiŃĐ°ĐœĐœĐ”"
-#: ../../standalone/drakfont:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "Initial tests"
+msgid "Optimize your security by using Mandrake Linux"
msgstr ""
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Post Install"
-msgstr "УсталёўĐșĐ°"
+#, c-format
+msgid "Help"
+msgstr "Đ”Đ°ĐżĐ°ĐŒĐŸĐłĐ°"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Install & convert Fonts"
-msgstr ""
+msgid "Your personal phone number"
+msgstr "Ваш асабiсты Ń‚ŃĐ»Đ”Ń„ĐŸĐœĐœŃ‹ ĐœŃƒĐŒĐ°Ń€"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Copy fonts on your system"
-msgstr "ĐŁ ĐČашаĐč ŃŃ–ŃŃ‚ŃĐŒĐ” ĐœŃĐŒĐ° ĐœiĐČĐŸĐŽĐœĐ°ĐłĐ° сДтĐșĐ°ĐČага аЮаптара!"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Which size do you want to keep for Windows on"
+msgstr "ĐŻĐșую ĐżŃ€Đ°ŃŃ‚ĐŸŃ€Ńƒ Đ·Đ°Ń…Đ°ĐČаць ĐŽĐ»Ń Windows?"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Remove List"
-msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
+msgid ""
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+msgstr ""
+"бэстаĐČыя ŃŃ‚Đ°Ń€ĐŸĐœĐși Đ°ĐŽĐżŃ€Đ°ŃžĐ»Đ”ĐœŃ‹ ĐŽŃĐŒĐ°ĐœŃƒ ЮруĐșу.\n"
+"ĐŸĐ”Ń€Đ°ĐŽ Ń‚Ń‹ĐŒ, яĐș ĐżŃ€Ń‹ĐœŃ‚ŃŃ€ Đ·Đ°ĐżŃ€Đ°Ń†ŃƒĐ”, ĐŒĐŸĐ¶Đ° праĐčсцi ĐżŃŃžĐœŃ‹ час.\n"
+"ĐĐœ ĐżŃ€Đ°Ń†ŃƒĐ” ĐœĐ°Ń€ĐŒĐ°Đ»ŃŒĐœĐ°?"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Selected All"
-msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” фаĐčĐ»"
+msgid "Username required"
+msgstr "IĐŒŃ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșу:"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1
#, c-format
-msgid "Unselected All"
+msgid ""
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "here if no."
-msgstr ""
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "Опцыi ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ SMB (Windows 9x/NT)"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "click here if you are sure."
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Install List"
-msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” сiŃŃ‚ŃĐŒŃ‹"
-
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
+msgid "mkinitrd optional arguments"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../network/isdn.pm:1
#, fuzzy, c-format
-msgid "Generic Printers"
-msgstr "ĐŸŃ€Ń‹ĐœŃ‚ŃŃ€"
+msgid "Protocol for the rest of the world"
+msgstr "ПаЮĐșĐ»ŃŽŃ‡ŃĐœĐœĐ”"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Abiword"
-msgstr "ĐĐŽĐŒŃĐœiць"
+msgid "Print test pages"
+msgstr "ДруĐș тэстаĐČых ŃŃ‚Đ°Ń€ĐŸĐœĐ°Đș"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "StarOffice"
-msgstr "ĐŽĐŸĐ±Ń€Đ°"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "64 MB or more"
+msgstr "64 ĐœĐ± цi Đ±ĐŸĐ»Đ”Đč"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ghostscript"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Выбар разЎзДлаў ĐŽĐ»Ń Ń„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœŃ"
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Please select the device where your %s is attached"
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
+msgid "Not formatted\n"
+msgstr "ĐĐ” Đ°ĐŽŃ„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐ°\n"
+
+#: ../../standalone/draksec:1
+#, c-format
+msgid "Periodic Checks"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "About"
-msgstr "ĐĐŽĐŒŃĐœiць"
+msgid "PXE Server Configuration"
+msgstr "ЗаĐșĐ°ĐœŃ‡ŃĐœĐœĐ” ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐși"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Font List"
-msgstr "ĐšŃ€ĐŸĐżĐșĐ° ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ"
+msgid "Backup the system files before:"
+msgstr "Đ”Ń€ŃĐœĐœŃ‹ фаĐčĐ» Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČĐ°Đč ĐșĐŸĐżii"
-#: ../../standalone/drakfont:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Advanced Options"
-msgstr "ЗаĐșĐ°ĐœŃ‡ŃĐœĐœĐ” ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐși"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"Гэта ŃŃ‚Đ°ĐœĐŽĐ°Ń€Ń‚ĐœŃ‹ ŃƒĐ·Ń€ĐŸĐČĐ”ĐœŃŒ Đ±ŃŃĐżĐ”Đși, яĐși рэĐșĐ°ĐŒĐ”ĐœĐŽĐ°ĐČĐ°ĐœŃ‹ ĐŽĐ»Ń ĐșĐ°ĐŒĐż'ютэру,\n"
+"яĐși ĐŽĐ°Đ»ŃƒŃ‡Đ°ĐœŃ‹ ĐŽĐ° Internet у яĐșасцi ĐșĐ»iĐ”ĐœŃ‚Ńƒ. Đ”Đ°ĐŽĐ°ĐœŃ‹Ń ĐœĐŸĐČыя праĐČДрĐși\n"
+"Đ±ŃŃĐżĐ”Đși."
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Uninstall Fonts"
-msgstr "Đ’Ń‹ĐŽĐ°Đ»Đ”ĐœĐœĐ” ĐČŃ‹Đ±Ń€Đ°ĐœŃ‹Ń… RPM-паĐșДтаў Đ· сiŃŃ‚ŃĐŒŃ‹"
+#: ../../any.pm:1
+#, c-format
+msgid "First floppy drive"
+msgstr "ĐŸĐ”Ń€ŃˆŃ‹ ЮысĐșĐ°ĐČĐŸĐŽ"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Get Windows Fonts"
+msgid "/File/_Quit"
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Import Fonts"
-msgstr "Đ€Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœĐ” разЎзДлаў"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak"
+msgstr "Dvorak"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "done"
-msgstr "Đ—Ń€ĐŸĐ±Đ»Đ”ĐœĐ°"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Choose the new size"
+msgstr "Выбар ĐœĐŸĐČых ĐżĐ°ĐŒĐ”Ń€Đ°Ńž"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "xfs restart"
-msgstr "Đ°Đ±ĐŒĐ”Đ¶Đ°ĐČĐ°ĐœĐœĐ”"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Media class"
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Suppress Fonts Files"
+msgid "The %s is not known by this version of Scannerdrake."
msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Faroe Islands"
+msgstr "IŃĐ»Đ°ĐœĐŽŃĐși"
+
#: ../../standalone/drakfont:1
#, fuzzy, c-format
msgid "Restart XFS"
msgstr "Đ°Đ±ĐŒĐ”Đ¶Đ°ĐČĐ°ĐœĐœĐ”"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Suppress Temporary Files"
+msgid "Add host/network"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "type1inst building"
+msgid ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please enter the directory to save to:"
+msgstr "Калі ласĐșĐ°, зрабіцД ĐœĐ”ĐșĐ°Đ»ŃŒĐșі рухаў ĐŒŃ‹ŃˆŃˆŃƒ."
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model name"
+msgstr "Опцыi ĐŒĐŸĐŽŃƒĐ»ŃŽ:"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Albania"
+msgstr "IŃ€Đ°ĐœŃĐși"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "pfm fonts conversion"
+msgid "No CDR/DVDR in drive!"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "ttf fonts conversion"
+msgid "British Indian Ocean Territory"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
+#, fuzzy, c-format
+msgid "Normal Mode"
+msgstr "ЗĐČычаĐčĐœŃ‹"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Ghostscript referencing"
+msgid ""
+"Please be sure that the cron daemon is included in your services. \n"
+"\n"
+"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer connection type"
+msgstr "ĐĄŃƒĐŒĐ”ŃĐœĐ°Đ” IĐœŃ‚ŃŃ€ĐœŃŃ‚-Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ”"
+
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Fonts conversion"
-msgstr ""
+msgid "No network adapter on your system!"
+msgstr "ĐŁ ĐČашаĐč ŃŃ–ŃŃ‚ŃĐŒĐ” ĐœŃĐŒĐ° ĐœiĐČĐŸĐŽĐœĐ°ĐłĐ° сДтĐșĐ°ĐČага аЮаптара!"
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Network %s"
+msgstr "ХДтĐșĐ°:"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "True Type install done"
+msgid "Malayalam"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "please wait during ttmkfdir..."
+msgid "Option %s out of range!"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "True Type fonts installation"
-msgstr "ĐŸĐ°ĐŽŃ€Ń‹Ń…Ń‚ĐŸŃžĐșĐ° ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœŃŒĐœŃ"
+msgid "Connect %s"
+msgstr "IĐŒŃ Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Fonts copy"
-msgstr "Đ€Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČаць ЮысĐșĐ”Ń‚Ńƒ"
+msgid "Restarting CUPS..."
+msgstr "Đ°Đ±ĐŒĐ”Đ¶Đ°ĐČĐ°ĐœĐœĐ”"
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "Search for fonts in installed list"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "ĐĐŽĐ»ŃƒŃ‡ŃĐœĐœĐ” Đ°ĐŽ сДтĐși"
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "could not find any font.\n"
-msgstr ""
+msgid "Duplicate mount point %s"
+msgstr "Đ”ŃƒĐ±Đ»ŃĐČĐ°ĐœĐœĐ” ĐżŃƒĐœĐșту ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ %s"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Reselect correct fonts"
+msgid "if set to yes, run chkrootkit checks."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr ""
+msgid "Connection Configuration"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ĐŽĐ°Đ»ŃƒŃ‡ŃĐœĐœŃ ĐŽĐ° IĐœŃ‚ŃŃ€ĐœŃŃ‚Ńƒ"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
#, fuzzy, c-format
-msgid "no fonts found"
-msgstr "ĐĐ” Đ·ĐœĐ°Đčшлi %s"
+msgid "Unknown|Generic"
+msgstr "ĐĐłŃƒĐ»ŃŒĐœŃ‹"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1
#, c-format
-msgid "parse all fonts"
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Unselect fonts installed"
-msgstr ""
+msgid "Quit"
+msgstr "ВыхаЮ"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Search installed fonts"
+msgid "Myanmar"
msgstr ""
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr "ĐĄŃƒĐŒĐ”ŃĐœĐ°Đ” IĐœŃ‚ŃŃ€ĐœŃŃ‚-Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ”"
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Auto allocate"
+msgstr "Đ Đ°Đ·ĐŒĐ”Ń€ĐșĐ°ĐČаць Đ°ŃžŃ‚Đ°ĐŒĐ°Ń‚Ń‹Ń‡ĐœĐ°"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Check bad blocks?"
+msgstr "ПраĐČĐ”Ń€Ń‹Ń†ŃŒ ĐœĐ° ĐœĐ°ŃŃžĐœĐ°ŃŃ†ŃŒ ĐŽŃ€ŃĐœĐœŃ‹Ń… Đ±Đ»ĐŸĐșаў?"
+
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "IĐœŃ‚ŃŃ€ĐœŃŃ‚ Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ” i ĐșĐ°ĐœŃ„iгурацыя"
+msgid "Other MultiMedia devices"
+msgstr "Đ†ĐœŃˆŃ‹Ń"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "ĐĄŃƒĐŒĐ”ŃĐœĐ°Đ” IĐœŃ‚ŃŃ€ĐœŃŃ‚-Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ” зараз ĐŒĐ°ĐłŃ‡Ń‹ĐŒĐ°"
+msgid "No remote machines"
+msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The setup has already been done, and it's currently enabled."
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Authentication NIS"
+msgstr "ĐŃžŃ‚ŃĐœŃ‚Ń‹Ń„iĐșацыя NIS"
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
+"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
-"УсД Đ°ĐŽĐșĐ°ĐœŃ„Ń–ĐłŃƒŃ€Đ°ĐČĐ°ĐœĐ°.\n"
-"Зараз ĐČы ĐŒĐŸĐ¶Đ°Ń†Đ” ŃŃƒĐŒĐ”ŃĐœĐ° ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць паЎĐșĐ»ŃŽŃ‡ŃĐœĐœĐ” ĐŽĐ° Internet\n"
-"Đ· Ń–ĐœŃˆŃ‹ĐŒŃ– ĐșĐ°ĐŒĐż'ŃŽŃ‚ŃŃ€Đ°ĐŒŃ– ў ĐČашаĐč ЛВС, Đșарыстаючыся Đ°ŃžŃ‚Đ°ĐŒĐ°Ń‚Ń‹Ń‡ĐœŃ‹ĐŒ\n"
-"ĐșĐ°ĐœŃ„Ń–ĐłŃƒŃ€Đ°ĐČĐ°ĐœĐœĐ”ĐŒ (DHCP)."
-
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
-#, c-format
-msgid "Problems installing package %s"
-msgstr "ĐŸŃ€Đ°Đ±Đ»Đ”ĐŒŃ‹ Đ· ŃƒŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ”ĐŒ паĐșĐ”Ń‚Ńƒ %s"
+"Опцыя ``ĐĐ±ĐŒĐ”Đ¶Đ°ĐČĐ°ĐœĐœĐ” ĐŸĐżŃ†Ń‹ŃŃž ĐșĐ°ĐŒĐ°ĐœĐŽĐœĐ°ĐłĐ° раЮĐșу'' ĐœĐ” ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаДцца бДз ĐżĐ°Ń€ĐŸĐ»Ń"
#: ../../standalone/drakgw:1
#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "ĐšĐ°ĐœŃ„Ń–ĐłŃƒŃ€Đ°Ń†Ń‹Ń ŃŃ†ŃĐœĐ°Ń€Đ°Ńž, ŃƒŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” ПЗ, запусĐș ŃĐ»ŃƒĐ¶Đ±Đ°Ńž..."
-
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Configuring..."
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° IDE"
+msgid "Internet Connection Sharing currently enabled"
+msgstr "ĐĄŃƒĐŒĐ”ŃĐœĐ°Đ” IĐœŃ‚ŃŃ€ĐœŃŃ‚-Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ” зараз ĐŒĐ°ĐłŃ‡Ń‹ĐŒĐ°"
-#: ../../standalone/drakgw:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "ĐŸĐ°Ń‚ŃĐœŃ†Ń‹ĐčĐœŃ‹ аЮрас ЛВС ĐșĐ°ĐœŃ„Đ»iĐșŃ‚ŃƒĐ” Đ· Đ±ŃĐłŃƒŃ‡Đ°Đč ĐșĐ°ĐœŃ„iгурацыяĐč %s!\n"
+msgid "Card IO_0"
+msgstr "IO_0 Đșарты"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
+msgid "United Arab Emirates"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr ""
+msgid "Card IO_1"
+msgstr "IO_1 Đșарты"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "The maximum lease (in seconds)"
+msgid "Thailand"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "The default lease (in seconds)"
+msgid "Routers:"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "The DHCP end range"
+msgid "Kazakhstan"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The DHCP start range"
+msgid "Display all available remote CUPS printers"
msgstr ""
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "The internal domain name"
-msgstr "IĐŒŃ ЮруĐșарĐși"
+#: ../../install_steps_newt.pm:1
+#, c-format
+msgid "Mandrake Linux Installation %s"
+msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” Mandrake Linux %s"
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "The DNS Server IP"
-msgstr "IP сДрĐČДра SMB"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Thai keyboard"
+msgstr "йаĐčсĐșая ĐșлаĐČiятура"
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "(This) DHCP Server IP"
-msgstr "IP сДрĐČДра SMB"
+#: ../../network/modem.pm:1
+#, c-format
+msgid "Dialup options"
+msgstr "ĐŸĐ°Ń€Đ°ĐŒĐ”Ń‚Ń€Ń‹ ĐșĐ°ĐŒŃƒŃ‚Đ°ĐČĐ°ĐœĐ°ĐłĐ° Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ (Dialup)"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"DHCP Server Configuration.\n"
-"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
-"\n"
+msgid "Bouvet Island"
msgstr ""
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Local Network adress"
-msgstr "сДтĐșĐ°ĐČая Đșарта ĐœĐ” Đ·ĐœĐŸĐčĐŽĐ·Đ”ĐœĐ°"
-
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
-"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
-"\n"
+msgid "If no port is given, 631 will be taken as default."
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Current configuration of `%s':\n"
+"Change your Cd-Rom!\n"
"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
+"Đ—ĐŒŃĐœiцД ĐČаш Cd-Rom!\n"
+"\n"
+"Калi ласĐșĐ°, ŃƒŃŃ‚Đ°ŃžŃ†Đ” Cd-Rom, ĐżĐ°Đ·ĐœĐ°Ń‡Đ°ĐœŃ‹ \"%s\", у ĐČаш ЮысĐșĐ°ĐČĐŸĐŽ i ĐœĐ°Ń†iŃĐœiцД OĐș "
+"ĐżĐ°ŃĐ»Ń.\n"
+"Калi ĐČы ĐœĐ” ĐŒĐ°Đ”Ń†Đ” ŃĐłĐŸ, ĐœĐ°Ń†iŃĐœiцД ĐĐŽĐŒŃĐœiць, Đșаб Đ°ĐŽĐŒŃĐœiць ŃƒŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” Đ· гэтага "
+"Cd."
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Current interface configuration"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ Đ· IĐœŃ‚ŃŃ€ĐœŃŃ‚Đ°ĐŒ"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Polish"
+msgstr "ĐŸĐŸĐ»ŃŒŃĐși"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Show current interface configuration"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ Đ· IĐœŃ‚ŃŃ€ĐœŃŃ‚Đ°ĐŒ"
+msgid "Mandrake Online"
+msgstr "Đ”Đ°Đ»ŃƒŃ‡ŃĐœĐœĐ” ĐŽĐ° IĐœŃ‚ŃŃ€ĐœŃŃ‚Ńƒ"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No (experts only)"
+msgid "\t-Network by webdav.\n"
msgstr ""
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Automatic reconfiguration"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ĐŒĐ°ĐŽŃĐŒŃƒ"
-
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
msgstr ""
+"Нi ĐČĐŸĐŽĐœŃ‹ ethernet сДтĐșĐ°ĐČы аЮаптар у ĐČашаĐč сiŃŃ‚ŃĐŒĐ” ĐœĐ” ĐČŃ‹Đ·ĐœĐ°Ń‡Đ°ĐœŃ‹. Калi ласĐșĐ°, "
+"сĐșарыстаĐčцД ĐșĐ°ĐœŃ„iгурацыĐčĐœŃ‹ iĐœŃŃ‚Ń€ŃƒĐŒŃĐœŃ‚."
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakgw:1
+#, c-format
+msgid "Netmask"
+msgstr "МасĐșĐ° сДтĐși"
+
+#: ../../diskdrake/hd_gtk.pm:1
#, fuzzy, c-format
-msgid "Network interface already configured"
-msgstr "ĐœĐ°ĐœiŃ‚ĐŸŃ€ паĐșŃƒĐ»ŃŒ ĐœĐ” ĐœĐ°ŃŃ‚Ń€ĐŸĐ”ĐœŃ‹"
+msgid "No hard drives found"
+msgstr "ЛаĐșĐ°Đ»ŃŒĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Калi ласĐșĐ°, Đ°Đ±ŃŃ€Ń‹Ń†Đ” сДтĐșĐ°ĐČы аЮаптар, яĐșі буЎзД ĐČыĐșĐ°Ń€Ń‹ŃŃ‚Đ°ĐœŃ‹ ĐŽĐ»Ń ĐŽĐ°Đ»ŃƒŃ‡ŃĐœĐœŃ ĐŽĐ° "
-"ĐČашаĐč лаĐșĐ°Đ»ŃŒĐœĐ°Đč сДтĐși."
+msgid "Logitech CC Series"
+msgstr "Logitech CC Series"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
+msgid "2 buttons"
+msgstr "2 ĐșĐœĐŸĐżĐși"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Network interface"
-msgstr "ХДтĐșĐ°ĐČы iĐœŃ‚ŃŃ€Ń„Đ”Đčс"
+msgid "What kind is your ISDN connection?"
+msgstr "ĐŻĐși тып ĐČашага ISDN Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ?"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Нi ĐČĐŸĐŽĐœŃ‹ ethernet сДтĐșĐ°ĐČы аЮаптар у ĐČашаĐč сiŃŃ‚ŃĐŒĐ” ĐœĐ” ĐČŃ‹Đ·ĐœĐ°Ń‡Đ°ĐœŃ‹. Калi ласĐșĐ°, "
-"сĐșарыстаĐčцД ĐșĐ°ĐœŃ„iгурацыĐčĐœŃ‹ iĐœŃŃ‚Ń€ŃƒĐŒŃĐœŃ‚."
+msgid "Label"
+msgstr "ĐœĐ”Ń‚ĐșĐ°"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No network adapter on your system!"
-msgstr "ĐŁ ĐČашаĐč ŃŃ–ŃŃ‚ŃĐŒĐ” ĐœŃĐŒĐ° ĐœiĐČĐŸĐŽĐœĐ°ĐłĐ° сДтĐșĐ°ĐČага аЮаптара!"
+msgid "Save on floppy"
+msgstr "ЗахаĐČĐ°ĐœĐœĐ” ĐœĐ° ЮысĐșĐ”Ń‚Ńƒ"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Interface %s"
-msgstr "ХДтĐșĐ°ĐČы iĐœŃ‚ŃŃ€Ń„Đ”Đčс"
+msgid "Printer auto-detection"
+msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "Which of the following is your ISDN card?"
+msgstr "ĐŻĐșая ў ĐČас ISDN Đșарта?"
+
+#: ../../services.pm:1
#, c-format
-msgid "Interface %s (using module %s)"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
msgstr ""
+"NFS - гэта ĐČŃĐŽĐŸĐŒŃ‹ пратаĐșĐŸĐ» ĐŽĐ»Ń ĐŽĐŸŃŃ‚ŃƒĐżŃƒ ĐŽĐ° фаĐčлаў праз TCP/IP сДтĐși.\n"
+"Гэтая служба Đ·Đ°Đ±ŃŃĐżĐ”Ń‡ĐČаДцца NFS сДрĐČĐ”Ń€Đ°ĐŒ, яĐși ĐșĐ°ĐœŃ„iĐłŃƒŃ€Ń‹Ń€ŃƒĐ”Ń†Đ° праз\n"
+"/etc/exports фаĐčĐ»."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Net Device"
-msgstr "ХДрĐČДр ЮруĐșу"
+msgid "Msec"
+msgstr "ĐŸĐŸŃ€Ń‚ ĐŒŃ‹ŃˆŃ‹"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"=> Notice, a label changed:\n"
+"%s"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
+#, c-format
+msgid "Number of capture buffers:"
+msgstr ""
+
+#: ../../interactive/stdio.pm:1
+#, fuzzy, c-format
+msgid "Your choice? (0/1, default `%s') "
+msgstr "Ваш ĐČыбар? (Đ·ĐŒĐŸŃžŃ‡Đ°ĐœĐœĐ” %s) "
+
+#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
+"\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
+"\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
+"\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
msgstr ""
-"Ваш ĐșĐ°ĐŒĐż'ютар ĐŒĐŸĐ¶Đ° Đ±Ń‹Ń†ŃŒ сĐșĐ°ĐœŃ„Ń–ĐłŃƒŃ€Đ°ĐČĐ°ĐœŃ‹ ĐœĐ° ŃŃƒĐŒĐ”ŃĐœĐ°Đ” ĐČыĐșĐ°Ń€Ń‹ŃŃ‚Đ°ĐœĐœĐ”\n"
-" Đ†ĐœŃ‚ŃŃ€ĐœŃŃ‚Ńƒ (Internet Connection Sharing)?\n"
+"УсД разЎзДлы, яĐșія былі Ń‚ĐŸĐ»ŃŒĐșі ĐČŃ‹Đ·ĐœĐ°Ń‡Đ°ĐœŃ‹ паĐČŃ–ĐœĐœŃ‹ Đ±Ń‹Ń†ŃŒ\n"
+"Đ°ĐŽŃ„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœŃ‹ (Ń„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČаць - Đ·ĐœĐ°Ń‡Ń‹Ń†ŃŒ стĐČарыць фаĐčлаĐČаю ŃŃ–ŃŃ‚ŃĐŒŃƒ).\n"
"\n"
-"ЗаўĐČага: ĐČĐ°ĐŒ ĐżĐ°Ń‚Ń€ŃĐ±ĐœŃ‹ сДтĐșĐ°ĐČы аЮаптар ĐŽĐ»Ń паЎĐșĐ»ŃŽŃ‡ŃĐœĐœŃ ĐŽĐ° ЛВС.\n"
"\n"
-"Вы жаЎаДцД ŃƒŃŃ‚Đ°Đ»ŃĐČаць ŃŃƒĐŒĐ”ŃĐœŃ‹ ĐŽĐŸŃŃ‚ŃƒĐż ĐŽĐ° Internet?"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Internet Connection Sharing"
-msgstr "ĐĄŃƒĐŒĐ”ŃĐœĐ°Đ” IĐœŃ‚ŃŃ€ĐœŃŃ‚-Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ”"
-
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "ĐĄŃƒĐŒĐ”ŃĐœĐ°Đ” IĐœŃ‚ŃŃ€ĐœŃŃ‚-Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ” зараз ĐŒĐ°ĐłŃ‡Ń‹ĐŒĐ°"
+"ĐŁ Ń‚ĐŸĐč жа час, ĐČы ĐŒĐŸĐ¶Đ°Ń†Đ” ĐżĐ”Ń€Đ°Ń„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČаць ŃƒĐ¶ĐŸ Ń–ŃĐœŃƒŃŽŃ‡Ń‹Ń разЎзДлы, Đșаб сцёрці\n"
+"ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń яĐșія ŃĐœŃ‹ ŃžŃ‚Ń€Ń‹ĐŒĐ»Ń–ĐČаюць. Калі ĐČы жаЎаДцД Đ·Ń€Đ°Đ±Ń–Ń†ŃŒ гэта, Đ°Đ±ŃŃ€Ń‹Ń†Đ” "
+"разЎзДлы\n"
+"яĐșія жаЎаДцД Đ°ĐŽŃ„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČаць.\n"
+"\n"
+"\n"
+"ЗаўĐČажцД, ĐČы паĐČŃ–ĐœĐœŃ‹ ĐżĐ”Ń€Đ°Ń„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČаць усД стĐČĐŸŃ€Đ°ĐœŃ‹Ń разЎзДлы. Вы паĐČŃ–ĐœĐœŃ‹\n"
+"ĐżĐ”Ń€Đ°Ń„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČаць разЎзДлы, яĐșія ŃžŃ‚Ń€Ń‹ĐŒĐ»Ń–ĐČаюць апДрацыĐčĐœŃƒŃŽ ŃŃ–ŃŃ‚ŃĐŒŃƒ (тыпу \"/"
+"\",\n"
+"\"/usr\" ці \"/var\"), алД ĐœĐ” паĐČŃ–ĐœĐœŃ‹ ĐżĐ”Ń€Đ°Ń„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČаць разЎзДлы, яĐșія "
+"ŃƒŃ‚Ń€Ń‹ĐŒĐ»Ń–ĐČаюць\n"
+"ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń, яĐșія ĐČы жаЎаДцД Đ·Đ°Ń…Đ°ĐČаць (Đ·ĐČычаĐčĐœĐ° /home).\n"
+"\n"
+"\n"
+"Калі ласĐșĐ°, Đ±ŃƒĐŽĐ·Ń†Đ” ўĐČажліĐČыя, абіраючы разЎзДлы, Đ±ĐŸ ĐżĐ°ŃĐ»Ń Ń„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœŃ\n"
+"усД ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń Đ±ŃƒĐŽŃƒŃ†ŃŒ ĐœĐ”Đ·ĐČĐ°Ń€ĐŸŃ‚ĐœĐ° ĐČŃ‹ĐŽĐ°Đ»Đ”ĐœŃ‹Ń.\n"
+"\n"
+"\n"
+"ĐĐ°Ń†Ń–ŃĐœŃ–Ń†Đ” \"йаĐș\" Đșалі ĐČы ĐłĐ°Ń‚ĐŸĐČыя Ń„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČаць Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ń.\n"
+"\n"
+"\n"
+"ĐĐ°Ń†Ń–ŃĐœŃ–Ń†Đ” \"ĐĐŽĐŒĐ”ĐœĐ°\" Đșалі жаЎаДцД Đ°Đ±Ń€Đ°Ń†ŃŒ Ń–ĐœŃˆŃ‹Ń разЎзДлы ĐŽĐ»Ń "
+"ŃƒŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃĐČашаĐč\n"
+"ĐœĐŸĐČĐ°Đč апДрацыĐčĐœĐ°Đč ŃŃ–ŃŃ‚ŃĐŒŃ‹ Mandrake Linux."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Enabling servers..."
-msgstr ""
+msgid "French"
+msgstr "Đ€Ń€Đ°ĐœŃ†ŃƒĐ·ŃĐși"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "dismiss"
-msgstr ""
+msgid "Czech (QWERTY)"
+msgstr "ЧДшсĐși (QWERTY)"
-#: ../../standalone/drakgw:1
+#: ../../standalone/service_harddrake:1
#, fuzzy, c-format
-msgid "reconfigure"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° X Window"
+msgid "Hardware probing in progress"
+msgstr "Đ”ŃƒĐ±Đ»ŃĐČĐ°ĐœĐœĐ” ĐżŃƒĐœĐșту ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ %s"
#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "enable"
-msgstr "йаблiца"
+msgid "Net Device"
+msgstr "ХДрĐČДр ЮруĐșу"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
+msgid "Summary"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "ĐĄŃƒĐŒĐ”ŃĐœĐ°Đ” IĐœŃ‚ŃŃ€ĐœŃŃ‚-Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ” зараз Đ·Đ°Đ±Đ°Ń€ĐŸĐœĐ”ĐœĐ°"
+msgid ""
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "ĐĄŃƒĐŒĐ”ŃĐœĐ°Đ” IĐœŃ‚ŃŃ€ĐœŃŃ‚-Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ” зараз Đ·Đ°Đ±Đ°Ń€ĐŸĐœĐ”ĐœĐ°"
+msgid "Next"
+msgstr "бэĐșст"
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
#, fuzzy, c-format
-msgid "Disabling servers..."
-msgstr "Đ’Ń‹Đ·ĐœĐ°Ń‡ŃĐœĐœĐ” прылаЎаў..."
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "КуЮы ĐČы жаЎаДцД ŃžŃŃ‚Đ°Đ»ŃĐČаць пачатĐșĐŸĐČы Đ·Đ°ĐłŃ€ŃƒĐ·Ń‡Ń‹Đș?"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "CHAP"
+msgstr "CHAP"
+
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "disable"
-msgstr "йаблiца"
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp)"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
"\n"
-"What would you like to do?"
+"Welcome.\n"
+"\n"
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "ĐĄŃƒĐŒĐ”ŃĐœĐ°Đ” IĐœŃ‚ŃŃ€ĐœŃŃ‚-Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ” зараз ĐŒĐ°ĐłŃ‡Ń‹ĐŒĐ°"
-
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
+msgid "Puerto Rico"
msgstr ""
-#: ../../standalone/drakhelp:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Path"
-msgstr ""
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "group :"
-msgstr "ĐŸŃ€Đ°Ń†ĐŸŃžĐœĐ°Ń група"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "user :"
-msgstr "IĐŒŃ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșу:"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Path selection"
-msgstr "Асабiсты ĐČыбар паĐșДтаў"
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "ЛiŃ‚ĐŸŃžŃĐși \"ĐœŃƒĐŒĐ°Ń€ раЮĐșĐ°\" QWERTY"
-#: ../../standalone/drakperm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "when checked, owner and group won't be changed"
+msgid ""
+"The following packages will be removed to allow upgrading your system: %s\n"
+"\n"
+"\n"
+"Do you really want to remove these packages?\n"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use group id for execution"
+msgid "Anguilla"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use owner id for execution"
-msgstr ""
+msgid "NIS Domain"
+msgstr "NIS Domain"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
-
-#: ../../standalone/drakperm:1
-#, c-format
-msgid "Set-GID"
-msgstr ""
-
-#: ../../standalone/drakperm:1
-#, c-format
-msgid "Set-UID"
+"\n"
+"- User Files:\n"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "sticky-bit"
+msgid "Antarctica"
msgstr ""
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Property"
-msgstr "ĐŸĐŸŃ€Ń‚"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Permissions"
-msgstr "ВДрсiя: %s\n"
-
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Current user"
-msgstr "ĐŸŃ€Ń‹ĐœŃŃ†ŃŒ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°"
+msgid "Mount options"
+msgstr "Опцыi ĐŒĐŸĐŽŃƒĐ»ŃŽ:"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "browse"
+msgid "Jamaica"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
#, c-format
-msgid "Edit current rule"
+msgid ""
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "edit"
-msgstr "ĐĄŃŃ€ŃĐŽĐœi"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Delete selected rule"
-msgstr "Đ’Ń‹ĐŽĐ°Đ»iць чаргу ЮруĐșу"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "delete"
-msgstr "Đ—Đœiшчыць"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Add a new rule at the end"
-msgstr "IĐŒŃ ЮруĐșарĐși"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "add a rule"
-msgstr "ДаЮаць ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°"
-
-#: ../../standalone/drakperm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Move selected rule down one level"
+msgid ""
+"Arguments: (arg, alert=1)\n"
+"\n"
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../install_steps_gtk.pm:1
#, fuzzy, c-format
-msgid "Down"
-msgstr "Đ—Ń€ĐŸĐ±Đ»Đ”ĐœĐ°"
-
-#: ../../standalone/drakperm:1
-#, c-format
-msgid "Move selected rule up one level"
-msgstr ""
+msgid "Please wait, preparing installation..."
+msgstr "ĐŸĐ°ĐŽŃ€Ń‹Ń…Ń‚ĐŸŃžĐșĐ° ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœŃŒĐœŃ"
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Up"
-msgstr ""
+msgid "Czech (QWERTZ)"
+msgstr "ЧДшсĐși (QWERTZ)"
-#: ../../standalone/drakperm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "select perm file to see/edit"
+msgid "Track network card id (useful for laptops)"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
+msgid "The port number should be an integer!"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "permissions"
-msgstr "РазЎзДл %s"
+msgid "You must choose an image file first!"
+msgstr "URI ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "group"
-msgstr "ĐŸŃ€Đ°Ń†ĐŸŃžĐœĐ°Ń група"
+msgid "Restore from Hard Disk."
+msgstr "ĐĐŽĐœĐ°ŃžĐ»Đ”ĐœĐœĐ” Đ· ЮысĐșДты"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "user"
-msgstr "IĐŒŃ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșу:"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Add to LVM"
+msgstr "ДаЮаць Юа LVM"
-#: ../../standalone/drakperm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "path"
-msgstr ""
+msgid "DNS server"
+msgstr "DNS сДрĐČДр"
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "СтĐČĐ°Ń€ŃĐœĐœĐ” ЮысĐșДты ĐŽĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
+#: ../../lang.pm:1
+#, c-format
+msgid "Trinidad and Tobago"
+msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
+msgid "LPD and LPRng do not support IPP printers.\n"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
+msgid "simple"
msgstr ""
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "No image found"
-msgstr "ЛаĐșĐ°Đ»ŃŒĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Clear all"
+msgstr "Ачысцiць усё"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Installation image directory"
-msgstr "ЗаĐșĐ°ĐœŃ‡ŃĐœĐœĐ” ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐși"
+msgid "No test pages"
+msgstr "йаĐș, ĐœĐ°ĐŽŃ€ŃƒĐșĐ°ĐČаць абДЎзĐČĐ” ŃŃ‚Đ°Ń€ĐŸĐœĐși тэĐșсту"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
+msgid "Adapter %s: %s"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "The DHCP end ip"
+msgid "Falkland Islands (Malvinas)"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "The DHCP start ip"
+msgid "Unknown model"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Interface %s (on network %s)"
-msgstr "ХДтĐșĐ°ĐČы iĐœŃ‚ŃŃ€Ń„Đ”Đčс"
-
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr ""
-"Калi ласĐșĐ°, ĐżĐ°Đ·ĐœĐ°Ń‡Ń†Đ” сДтĐșĐ°ĐČы аЮаптар, яĐși ĐżĐ»Đ°ĐœŃƒĐ”Ń†Đ” ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць ĐŽĐ»Ń "
-"ĐŽĐ°Đ»ŃƒŃ‡ŃĐœĐœŃ ĐŽĐ° iĐœŃ‚ŃŃ€ĐœŃŃ‚"
-
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+msgid "if set to yes, check files/directories writable by everybody."
msgstr ""
-"Ваш ĐșĐ°ĐŒĐż'ютар ĐŒĐŸĐ¶Đ° Đ±Ń‹Ń†ŃŒ сĐșĐ°ĐœŃ„Ń–ĐłŃƒŃ€Đ°ĐČĐ°ĐœŃ‹ ĐœĐ° ŃŃƒĐŒĐ”ŃĐœĐ°Đ” ĐČыĐșĐ°Ń€Ń‹ŃŃ‚Đ°ĐœĐœĐ”\n"
-" Đ†ĐœŃ‚ŃŃ€ĐœŃŃ‚Ńƒ (Internet Connection Sharing)?\n"
-"\n"
-"ЗаўĐČага: ĐČĐ°ĐŒ ĐżĐ°Ń‚Ń€ŃĐ±ĐœŃ‹ сДтĐșĐ°ĐČы аЮаптар ĐŽĐ»Ń паЎĐșĐ»ŃŽŃ‡ŃĐœĐœŃ ĐŽĐ° ЛВС.\n"
-"\n"
-"Вы жаЎаДцД ŃƒŃŃ‚Đ°Đ»ŃĐČаць ŃŃƒĐŒĐ”ŃĐœŃ‹ ĐŽĐŸŃŃ‚ŃƒĐż ĐŽĐ° Internet?"
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Installation Server Configuration"
-msgstr "ЗаĐșĐ°ĐœŃ‡ŃĐœĐœĐ” ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐși"
-
-#: ../../standalone/drakpxe:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "PXE Server Configuration"
-msgstr "ЗаĐșĐ°ĐœŃ‡ŃĐœĐœĐ” ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐși"
+msgid "authentication"
+msgstr "ĐŃžŃ‚ŃĐœŃ‚Ń‹Ń„iĐșацыя"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Please wait, setting security options..."
-msgstr "ĐŸĐ°ĐŽŃ€Ń‹Ń…Ń‚ĐŸŃžĐșĐ° ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœŃŒĐœŃ"
+msgid "Backup Now"
+msgstr "Настр. фаĐčлаĐČых сiŃŃ‚ŃĐŒĐ°Ńž"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Please wait, setting security level..."
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐși ŃžĐ·Ń€ĐŸŃžĐœŃ Đ±ŃŃĐżĐ”Đși"
+msgid "/_File"
+msgstr "ЀаĐčлы:\n"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Periodic Checks"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
msgstr ""
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "System Options"
-msgstr "Опцыi ĐŒĐŸĐŽŃƒĐ»ŃŽ:"
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
+msgstr ""
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Network Options"
-msgstr "Опцыi ĐŒĐŸĐŽŃƒĐ»ŃŽ:"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Tamil (ISCII-layout)"
+msgstr ""
-#: ../../standalone/draksec:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+msgid "Mayotte"
msgstr ""
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Security Administrator:"
-msgstr "Опцыi Đ°ĐŽĐŽĐ°Đ»Đ”ĐœĐ°ĐłĐ° ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ lpd"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Creating auto install floppy..."
+msgstr "СтĐČĐ°Ń€ŃĐœĐœĐ” ЮысĐșДты ĐŽĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
-#: ../../standalone/draksec:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Security Alerts:"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐși ŃžĐ·Ń€ĐŸŃžĐœŃ Đ±ŃŃĐżĐ”Đși"
+msgid "Searching for scanners ..."
+msgstr "Đ”Đ°ŃŃ‚ŃƒĐżĐœŃ‹Ń паĐșДты"
-#: ../../standalone/draksec:1
+#: ../../steps.pm:1
#, fuzzy, c-format
-msgid "Security Level:"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐși ŃžĐ·Ń€ĐŸŃžĐœŃ Đ±ŃŃĐżĐ”Đși"
+msgid "Partitioning"
+msgstr "ĐŸŃ€Ń‹ĐœŃ‚ŃŃ€"
-#: ../../standalone/draksec:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "(default value: %s)"
-msgstr " ? (Đ·ĐŒĐŸŃžŃ‡Đ°ĐœĐœĐ” %s) "
+msgid "Russia"
+msgstr "РусĐși"
-#: ../../standalone/draksec:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-" to the Internet as a client.\n"
-"\n"
-"High: There are already some restrictions, and more automatic checks "
-"are run every night.\n"
-"\n"
-"Higher: The security is now high enough to use the system as a server "
-"which can accept\n"
-" connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-" should choose a lower level.\n"
-"\n"
-"Paranoid: This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-" features are at their maximum\n"
-"\n"
-"Security Administrator:\n"
-" If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-" email)"
+msgid "ethernet card(s) detected"
msgstr ""
-#: ../../standalone/draksound:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
+msgid "Syslog"
msgstr ""
-#: ../../standalone/draksound:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+msgid "Can't create catalog!"
msgstr ""
-#: ../../standalone/draksound:1
-#, fuzzy, c-format
-msgid "No Sound Card detected!"
-msgstr "Đ Đ°Đ·ĐŒĐ”Ń€ĐșĐ°ĐČĐ°ĐœĐœĐ”"
-
-#: ../../standalone/draksplash:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "%s BootSplash (%s) preview"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
msgstr ""
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Generating preview ..."
-msgstr "Đ’Ń‹Đ·ĐœĐ°Ń‡ŃĐœĐœĐ” прылаЎаў..."
-
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "You must choose an image file first!"
-msgstr "URI ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
-
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
#, fuzzy, c-format
-msgid "ProgressBar color selection"
-msgstr "Đ—Đ»ŃƒŃ‡ŃĐœĐœĐ” ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
+msgid "Not enough free space for auto-allocating"
+msgstr "ĐĐ” хапаД ĐżŃ€Đ°ŃŃ‚ĐŸŃ€Ń‹ ĐŽĐ»Ń стĐČĐ°Ń€ŃĐœĐœŃ ĐœĐŸĐČых разЎзДлаў"
-#: ../../standalone/draksplash:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
-msgstr ""
+msgid "Set root password"
+msgstr "ĐŸĐ°Ń€ĐŸĐ»ŃŒ ĐŽĐ»Ń root"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "saving Bootsplash theme..."
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
msgstr ""
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "choose image file"
-msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” ĐŽĐ·Đ”ŃĐœĐœĐ”"
-
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "choose image"
-msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” ĐŽĐ·Đ”ŃĐœĐœĐ”"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr "УсД ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń ў разЎзДлД %s Đ±ŃƒĐŽŃƒŃ†ŃŒ ŃŃ‚Ń€Đ°Ń‡Đ°ĐœŃ‹"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Configure bootsplash picture"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ŃĐ»ŃƒĐ¶Đ±Đ°Ńž"
+msgid "Internet connection configuration"
+msgstr "IĐœŃ‚ŃŃ€ĐœŃŃ‚ Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ” i ĐșĐ°ĐœŃ„iгурацыя"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Make kernel message quiet by default"
+msgid "Scanning for TV channels"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Display logo on Console"
+msgid "Kernel:"
msgstr ""
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Choose color"
-msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” ĐŒĐ°ĐœiŃ‚ĐŸŃ€"
-
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Save theme"
-msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” сiŃŃ‚ŃĐŒŃ‹"
+msgid "/_About..."
+msgstr "ĐĐŽĐŒŃĐœiць"
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Preview"
-msgstr "прылаЎа"
+msgid "Bengali"
+msgstr "йаблiца"
-#: ../../standalone/draksplash:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "the color of the progress bar"
-msgstr ""
+msgid "Preference: "
+msgstr "ĐŸĐ°Ń€Đ°ĐŒĐ”Ń‚Ń€Ń‹: "
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "the height of the progress bar"
-msgstr ""
+msgid "Wizard..."
+msgstr "МаĐčстар стĐČĐ°Ń€ŃĐœĐœŃ..."
-#: ../../standalone/draksplash:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "the width of the progress bar"
+msgid "Services: %d activated for %d registered"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
+msgid "Create a bootdisk"
+msgstr "СтĐČарыць загр. ЮысĐș"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
+msgid "Solomon Islands"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "text box height"
-msgstr ""
+msgid "(module %s)"
+msgstr "(ĐŒĐŸĐŽŃƒĐ»ŃŒ %s)"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "text width"
-msgstr ""
+msgid "Workgroup"
+msgstr "ĐŸŃ€Đ°Ń†ĐŸŃžĐœĐ°Ń група"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer host name or IP"
+msgstr "IĐŒŃ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
+msgid "Host Path or Module"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
+msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr ""
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "Browse"
-msgstr "ĐŸŃ€Đ°ĐłĐ»ŃĐŽ"
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Show current interface configuration"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ Đ· IĐœŃ‚ŃŃ€ĐœŃŃ‚Đ°ĐŒ"
-#: ../../standalone/draksplash:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Theme name"
-msgstr "IĐŒŃ ĐŽĐ»Ń Ń€Đ°Đ·ĐŒĐ”Ń€ĐșĐ°ĐČĐ°ĐœĐ°ĐłĐ° рэсурсу"
+msgid "Development"
+msgstr "Ń€Đ°ŃĐżŃ€Đ°Ń†ĐŸŃžŃˆŃ‡Ń‹Đș"
-#: ../../standalone/draksplash:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Done"
+msgstr "Đ—Ń€ĐŸĐ±Đ»Đ”ĐœĐ°"
+
+#: ../../network/drakfirewall.pm:1
#, fuzzy, c-format
-msgid "final resolution"
-msgstr "ĐŸĐ°ĐŒĐ”Ń€Ń‹ эĐșŃ€Đ°ĐœŃƒ"
+msgid "Web Server"
+msgstr "сДрĐČДр"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\tDo not include System Files\n"
+msgstr ""
+
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "first step creation"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ĐżĐ°ŃĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
+msgid "Chile"
+msgstr "ĐŸĐŸŃ€Ń‚ ĐŒŃ‹ŃˆŃ‹"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"Do not use \"scannerdrake\" for this device!"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "No TV Card detected!"
-msgstr ""
+msgid "(already added %s)"
+msgstr "(ŃƒĐ¶ĐŸ ĐŽĐ°ĐŽĐ°ĐŽĐ·Đ”ĐœĐ° %s)"
-#: ../../standalone/drakxtv:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
+msgid ", using command %s"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Have a nice day!"
+msgid "Alt and Shift keys simultaneously"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "XawTV isn't installed!"
+msgid "Flags"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "ĐŃ‚Ń€Ń‹ĐŒĐ°Đ»Đ°ŃŃ ĐżĐ°ĐŒŃ‹Đ»ĐșĐ° ўпараЮĐșĐ°ĐČĐ°ĐœĐœŃ паĐșДтаў:"
-
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
+msgid "Add/Del Users"
+msgstr "ДаЮаць ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Area:"
+msgid "Host/network IP address missing."
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "TV norm:"
+msgid "weekly"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
+msgid "Settings"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Australian Optus cable TV"
+msgid "The entered host/network IP is not correct.\n"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "Newzealand"
+msgid "Here is the full list of available countries"
msgstr ""
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "France [SECAM]"
-msgstr "Đ€Ń€Đ°ĐœŃ†Ń‹Ń"
-
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "East Europe"
-msgstr "Đ•ŃžŃ€ĐŸĐżĐ°"
-
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "West Europe"
-msgstr "Đ•ŃžŃ€ĐŸĐżĐ°"
+msgid "Alternative test page (A4)"
+msgstr "ДруĐș тэстаĐČых ŃŃ‚Đ°Ń€ĐŸĐœĐ°Đș"
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "China (broadcast)"
+msgid ""
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
+"Калi ĐČы ĐŒĐ°Đ”Ń†Đ” ўсД CD ЮысĐși са спiса ĐœiĐ¶ŃĐč, ĐœĐ°Ń†iŃĐœiцД ОĐș.\n"
+"Калi ĐČы ĐœĐ” ĐŒĐ°Đ”Ń†Đ” Đ°Đœi ĐČĐŸĐŽĐœĐ°ĐłĐ° Đ· гэтых CD ЮысĐșаў, ĐœĐ°Ń†iŃĐœiцД ĐĐŽĐŒŃĐœiць.\n"
+"Калi ĐœĐ”ĐșĐ°Ń‚ĐŸŃ€Ń‹Ń… Đ· CD ЮысĐșаў ĐœĐ” ĐŒĐ°Đ”Ń†Đ”, Đ°ĐŽĐŒŃĐœiцД iх ĐČŃ‹ĐŽĐ·ŃĐ»Đ”ĐœĐœĐ” i ĐœĐ°Ń†iŃĐœiцД ОĐș."
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Japan (cable)"
+msgid "Wait please"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Japan (broadcast)"
-msgstr ""
+msgid "PAP"
+msgstr "PAP"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Canada (cable)"
-msgstr "ĐšĐ°ĐœĐ°ĐŽŃĐși (КĐČĐ”Đ±ŃĐș)"
-
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "USA (cable)"
-msgstr ""
+msgid "Backup user files"
+msgstr "Đ”Ń€ŃĐœĐœŃ‹ фаĐčĐ» Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČĐ°Đč ĐșĐŸĐżii"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "USA (broadcast)"
-msgstr ""
+msgid "New"
+msgstr "ĐĐŸĐČы"
-#: ../../standalone/drakxtv:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"XawTV isn't installed!\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
"\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
"\n"
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
+"\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
+"\n"
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, c-format
-msgid "primary"
+msgid ""
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
+"\n"
+"If you do not know what to choose, stay with the default option."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "secondary"
-msgstr "%d сДĐșŃƒĐœĐŽĐ°Ńž"
+msgid "Load from floppy"
+msgstr "ĐĐŽĐœĐ°ŃžĐ»Đ”ĐœĐœĐ” Đ· ЮысĐșДты"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The following printer was auto-detected. "
+msgstr "ĐĐ°ŃŃ‚ŃƒĐżĐœŃ‹Ń паĐșДты Đ±ŃƒĐŽŃƒŃ†ŃŒ ĐČŃ‹ĐŽĐ°Đ»Đ”ĐœŃ‹"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
+msgid "Boot Floppy"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Norwegian"
+msgstr "НарĐČДжсĐși"
+
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Unknown"
-msgstr "ĐĐłŃƒĐ»ŃŒĐœŃ‹"
+msgid "Searching for new scanners ..."
+msgstr "Đ”Đ°ŃŃ‚ŃƒĐżĐœŃ‹Ń паĐșДты"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "unknown"
+msgid "Apache World Wide Web Server"
msgstr ""
#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Running \"%s\" ..."
-msgstr "Чытаю базу ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń… ЮраĐčĐČĐ”Ń€ĐŸŃž CUPS"
-
-#: ../../standalone/harddrake2:1
#, c-format
-msgid "Run config tool"
+msgid "stepping of the cpu (sub model (generation) number)"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Configure module"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ĐŒŃ‹ŃˆŃ‹"
+msgid "select path to restore (instead of /)"
+msgstr "ĐșĐ°Đ»i ласĐșĐ°, ĐżĐ°Đ·ĐœĐ°Ń‡Ń†Đ” тып ĐČашаĐč ĐŒŃ‹ŃˆŃ‹."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Information"
-msgstr "IĐœŃ„Đ°Ń€ĐŒĐ°Ń†Ń‹Ń"
+msgid "Configure bootsplash picture"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ŃĐ»ŃƒĐ¶Đ±Đ°Ńž"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Detected hardware"
-msgstr "Đ“Đ». Đ°ĐżiŃĐ°ĐœĐœĐ” Đ°Đ±ŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
+#: ../../lang.pm:1
+#, c-format
+msgid "China"
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Harddrake2 version "
-msgstr "Đ’Ń‹Đ·ĐœĐ°Ń‡ŃĐœĐœĐ” Đ¶ĐŸŃ€ŃŃ‚Đșага ЮысĐșу"
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr "Да яĐșĐŸĐłĐ° ĐżĐ°ŃĐ»ŃĐŽĐŸŃžĐœĐ°ĐłĐ° ĐżĐŸŃ€Ń‚Ńƒ ĐŽĐ°Đ»ŃƒŃ‡Đ°ĐœŃ‹ ĐŒĐ°ĐŽŃĐŒ?"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Detection in progress"
-msgstr "Đ”ŃƒĐ±Đ»ŃĐČĐ°ĐœĐœĐ” ĐżŃƒĐœĐșту ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ %s"
+msgid "Georgia"
+msgstr "НарĐČДжсĐși"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/printerdrake:1
#, fuzzy, c-format
-msgid "Author:"
-msgstr "ĐŃžŃ‚Đ°ĐżĐŸŃˆŃƒĐș"
+msgid "Reading data of installed printers..."
+msgstr "Đ”Đ°ŃŃ‚ŃƒĐżĐœŃ‹Ń паĐșДты"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+msgid " Erase Now "
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "About Harddrake"
-msgstr ""
+msgid "server"
+msgstr "сДрĐČДр"
-#: ../../standalone/harddrake2:1
+#: ../../install_any.pm:1
#, fuzzy, c-format
-msgid "/_About..."
-msgstr "ĐĐŽĐŒŃĐœiць"
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "УстаўцД ЮысĐșĐ”Ń‚Ńƒ ў ЮысĐșĐ°ĐČĐŸĐŽ %s"
#: ../../standalone/harddrake2:1
#, c-format
-msgid "/_Report Bug"
+msgid "yes means the processor has an arithmetic coprocessor"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Please Wait... Applying the configuration"
+msgstr "ПраĐČДрĐșĐ° ĐżĐ°Ń€Đ°ĐŒĐ”Ń‚Ń€Đ°Ńž ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐși"
+
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
-msgstr ""
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Welcome to GRUB the operating system chooser!"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Select a device !"
-msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” ĐČiЮэаĐșарту"
+#: ../../bootloader.pm:1
+#, c-format
+msgid "Grub"
+msgstr "Grub"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"Description of the fields:\n"
-"\n"
+msgid "SCSI controllers"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Harddrake help"
+msgid " on LPD server \"%s\", printer \"%s\""
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/_Fields description"
-msgstr "АпiŃĐ°ĐœĐœĐ”"
-
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakedm:1
#, c-format
-msgid "/_Help"
-msgstr "/_Đ”Đ°ĐżĐ°ĐŒĐŸĐłĐ°"
+msgid "Choosing a display manager"
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, fuzzy, c-format
-msgid "/_Quit"
-msgstr "ВыхаЮ"
+msgid "Zeroconf Host name"
+msgstr "IĐŒŃ ĐŒĐ°ŃˆŃ‹ĐœŃ‹"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "IP address should be in format 1.2.3.4"
+msgstr "IP аЮрас паĐČiĐœĐ”Đœ Đ±Ń‹Ń†ŃŒ у Ń„Đ°Ń€ĐŒĐ°Ń†Đ” 1.2.3.4"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _modems"
-msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
+#: ../../lang.pm:1
+#, c-format
+msgid "Ecuador"
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "/Autodetect _printers"
-msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
+msgid "Add an item"
+msgstr "ДаЮаць ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/_Options"
+msgid "The printers on this machine are available to other computers"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "the vendor name of the processor"
+msgid "I can't find needed image file `%s'."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "the vendor name of the device"
+msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "Калi ласĐșĐ°, ĐżĐ°Đ·ĐœĐ°Ń‡Ń†Đ” ĐżĐŸŃĐ»ŃĐŽĐŸŃžĐœŃ‹ ĐżĐŸŃ€Ń‚, ĐŽĐ° яĐșĐŸĐłĐ° паЎĐșĐ»ŃŽŃ‡Đ°ĐœĐ° ĐČашая ĐŒŃ‹Ńˆ."
-
-#: ../../standalone/harddrake2:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
+msgid ""
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Model stepping"
-msgstr "Ń„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœĐ”"
+#: ../../any.pm:1
+#, c-format
+msgid "Shell"
+msgstr "ĐĐ±Đ°Đ»ĐŸĐœĐșĐ°:"
-#: ../../standalone/harddrake2:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "the number of the processor"
-msgstr ""
+msgid "PCI"
+msgstr "PCI"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Processor ID"
+msgid "Sao Tome and Principe"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "network printer port"
-msgstr "ХДтĐșĐ°ĐČы ĐżŃ€Ń‹ĐœŃ‚ŃŃ€ (TCP/Socket)"
-
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "the name of the CPU"
+msgid "Can't login using username %s (bad password?)"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Name"
-msgstr "IĐŒŃ: "
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Azerbaidjani (latin)"
+msgstr "АзДрбаĐčĐŽĐ¶Đ°ĐœŃĐșі (latin)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "the number of buttons the mouse has"
-msgstr "2 ĐșĐœĐŸĐżĐși"
+msgid "Package not installed"
+msgstr "ЗаĐșĐ°ĐœŃ‡ŃĐœĐœĐ” ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, fuzzy, c-format
-msgid "Number of buttons"
-msgstr "2 ĐșĐœĐŸĐżĐși"
+msgid "Become a MandrakeExpert"
+msgstr "эĐșспДрт"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Official vendor name of the cpu"
+msgid "American Samoa"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Protocol"
+msgstr ""
+
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Model name"
-msgstr "Опцыi ĐŒĐŸĐŽŃƒĐ»ŃŽ:"
+msgid "Copy fonts on your system"
+msgstr "ĐŁ ĐČашаĐč ŃŃ–ŃŃ‚ŃĐŒĐ” ĐœŃĐŒĐ° ĐœiĐČĐŸĐŽĐœĐ°ĐłĐ° сДтĐșĐ°ĐČага аЮаптара!"
#: ../../standalone/harddrake2:1
#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgid "Harddrake help"
msgstr ""
#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Model"
-msgstr "ĐŸĐŸŃ€Ń‚ ĐŒŃ‹ŃˆŃ‹"
+#, c-format
+msgid "Bogomips"
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "hard disk model"
-msgstr "АЮрасы ĐżĐ°ĐŒŃŃ†Ń– Đșарты (DMA)"
+msgid "Mandrake Terminal Server Configuration"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ Đ· IĐœŃ‚ŃŃ€ĐœŃŃ‚Đ°ĐŒ"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "class of hardware device"
+msgid ""
+"\n"
+" DrakBackup Report Details\n"
+"\n"
+"\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Media class"
+msgid "Restore all backups"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Sub generation of the cpu"
+msgid "if set to yes, check open ports."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Level"
-msgstr "ŃƒĐ·Ń€ĐŸĐČĐ”ĐœŃŒ"
-
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Format of floppies supported by the drive"
+msgid "This may take a moment to erase the media."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Floppy format"
-msgstr "Đ€Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœĐ”"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "You can't select/unselect this package"
+msgstr "Вы ĐœĐ” ĐŒĐŸĐ¶Đ°Ń†Đ” ĐČŃ‹Đ»ŃƒŃ‡Đ°Ń†ŃŒ і Đ°ĐŽĐŒŃĐœŃŃ†ŃŒ ĐČŃ‹Đ»ŃƒŃ‡ŃĐœĐœĐ” гэтага паĐșĐ”Ń‚Ńƒ"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
+#, c-format
+msgid "Warning"
+msgstr "ĐŁĐČага!"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"\n"
+"- Other Files:\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remote host name"
+msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐČузДл"
+
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "deactivate now"
+msgstr "АĐșŃ‚Ń‹ŃžĐœŃ‹"
+
+#: ../../any.pm:1
#, c-format
-msgid "Halt bug"
+msgid "access to X programs"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "Computing the size of the Windows partition"
+msgstr "ВыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць ĐœĐ”Đ·Đ°ĐœŃŃ‚ŃƒŃŽ ĐżŃ€Đ°ŃŃ‚ĐŸŃ€Ńƒ ĐœĐ° разЎзДлД Windows"
+
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "Italy"
+msgstr "IŃ‚Đ°Đ»ŃŒŃĐœŃĐși"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
+msgid "Name of printer"
+msgstr "IĐŒŃ ЮруĐșарĐși"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "disable"
+msgstr "йаблiца"
+
+#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "F00f bug"
-msgstr ""
+msgid "error unmounting %s: %s"
+msgstr "ĐżĐ°ĐŒŃ‹Đ»ĐșĐ° Ń€Đ°Đ·ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ %s: %s"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgid "Do it!"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Whether the FPU has an irq vector"
+msgid "Cayman Islands"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
+msgid "%s not responding"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Select model manually"
+msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Is FPU present"
-msgstr ""
+msgid "Format"
+msgstr "Đ€Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœĐ”"
-#: ../../standalone/harddrake2:1
+#: ../../network/adsl.pm:1
#, c-format
msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Fdiv bug"
+msgid "Various"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "CPU flags reported by the kernel"
+msgid "Zip"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Flags"
+msgid ""
+"\n"
+"\n"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
+msgid ""
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Module"
-msgstr "ĐŸĐŸŃ€Ń‚ ĐŒŃ‹ŃˆŃ‹"
-
-#: ../../standalone/harddrake2:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
+msgid "PDQ"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "New devfs device"
-msgstr "ĐŸŃ€Ń‹Đ»Đ°ĐŽĐ°-ŃˆĐ»ŃŽĐ·"
+msgid "Albanian"
+msgstr "IŃ€Đ°ĐœŃĐși"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "old static device name used in dev package"
+msgid "Lithuania"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
+#, c-format
+msgid "Compact"
+msgstr "ĐšĐ°ĐŒĐżĐ°ĐșŃ‚ĐœĐ°"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Old device file"
-msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” фаĐčĐ»"
+msgid "Detected model: %s %s"
+msgstr "Đ”ŃƒĐ±Đ»ŃĐČĐ°ĐœĐœĐ” ĐżŃƒĐœĐșту ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ %s"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "This field describes the device"
+msgid "MandrakeSoft has selected the best software for you"
msgstr ""
#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
+"This is HardDrake, a Mandrake hardware configuration tool.\n"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Frequency (MHz)"
-msgstr ""
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Local files"
+msgstr "ЛаĐșĐ°Đ»ŃŒĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Cpuid level"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐși ŃžĐ·Ń€ĐŸŃžĐœŃ Đ±ŃŃĐżĐ”Đși"
+msgid "maybe"
+msgstr "ĐŒĐŸĐ¶Đ° Đ±Ń‹Ń†ŃŒ"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
+msgid "Panama"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Cpuid family"
+msgid ""
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr ""
+msgid "Monitor"
+msgstr "ĐœĐ°ĐœiŃ‚ĐŸŃ€"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Coma bug"
+msgid ""
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
+msgid "65 thousand colors (16 bits)"
+msgstr "65 тысяч ĐșĐŸĐ»Đ”Ń€Đ°Ńž (16 бiтаў)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Drive capacity"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Size of the (second level) cpu cache"
-msgstr ""
+msgid "Size: %d KB\n"
+msgstr "ĐŸĐ°ĐŒĐ”Ń€: %d Kб\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Cache size"
-msgstr "ĐżĐ°ĐŒĐ”Ń€ Đ±Đ»ĐŸĐșу"
+msgid "Remove fonts on your system"
+msgstr "ĐŁ ĐČашаĐč ŃŃ–ŃŃ‚ŃĐŒĐ” ĐœŃĐŒĐ° ĐœiĐČĐŸĐŽĐœĐ°ĐłĐ° сДтĐșĐ°ĐČага аЮаптара!"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
msgstr ""
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Graphical interface at startup"
+msgstr "ЗапусĐș X пры старцД сiŃŃ‚ŃĐŒŃ‹"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please enter the directory to save:"
+msgstr "Калі ласĐșĐ°, зрабіцД ĐœĐ”ĐșĐ°Đ»ŃŒĐșі рухаў ĐŒŃ‹ŃˆŃˆŃƒ."
+
#: ../../standalone/harddrake2:1
#, c-format
-msgid "Location on the bus"
+msgid "format of floppies supported by the drive"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../raid.pm:1
#, c-format
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "ĐĐ”ĐŽĐ°ŃŃ‚Đ°Ń‚ĐșĐŸĐČĐ° разЎзДлаў ĐŽĐ»Ń RAID ŃƒĐ·Ń€ĐŸŃžĐœŃ %d\n"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
msgstr ""
+"бут Đ·ĐŒŃŃˆŃ‡Đ°ŃŽŃ†Ń†Đ° чэргi ЮруĐșу.\n"
+"Вы ĐŒĐŸĐ¶Đ°Ń†Đ” ЮаЮаць яшчэ, Đ°Đ»ŃŒĐ±ĐŸ Đ·ĐŒŃĐœiць iŃĐœŃƒŃŽŃ‡Ń‹Ń."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Bus identification"
-msgstr "ĐŃžŃ‚ŃĐœŃ‚Ń‹Ń„iĐșацыя"
+msgid "Connected"
+msgstr "IĐŒŃ Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "USB printer \\#%s"
+msgstr "IĐŒŃ ЮруĐșарĐși"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Bogomips"
+msgid "Macedonian"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "EIDE/SCSI channel"
+msgid "Bridges and system controllers"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Channel"
-msgstr "ĐĐŽĐŒĐ”ĐœĐ°"
-
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+msgid "/File/_Save"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Bus"
+msgid "Mali"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
+#, fuzzy, c-format
+msgid "No details"
+msgstr "ĐŸĐ°ĐŽŃ€Đ°Đ±ŃĐ·ĐœĐ°ŃŃ†i"
+
+#: ../../pkgs.pm:1
#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr ""
+msgid "very nice"
+msgstr "ĐČĐ”Đ»ŃŒĐŒi ĐŽĐŸĐ±Ń€Đ°"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Alternative drivers"
-msgstr "ДруĐș тэстаĐČых ŃŃ‚Đ°Ń€ĐŸĐœĐ°Đș"
+msgid "Preview"
+msgstr "прылаЎа"
-#: ../../standalone/keyboarddrake:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Remote Control"
+msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please select media for backup..."
+msgstr "Калi ласĐșĐ°, Đ°Đ±ŃŃ€Ń‹Ń†Đ” ĐŒĐŸĐČу ĐŽĐ»Ń ĐșĐ°Ń€Ń‹ŃŃ‚Đ°ĐœĐœŃ."
+
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Вы жаЎаДцД Đșаб BackSpace працаĐČаў у ĐșĐ°ĐœŃĐŸĐ»Ń– яĐș Delete?"
+msgid "XFree86 server: %s\n"
+msgstr "ХДрĐČДр XFree86: %s\n"
-#: ../../standalone/keyboarddrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Калi ласĐșĐ°, Đ°Đ±ŃŃ€Ń‹Ń†Đ” тып ĐșлаĐČiятуры."
+msgid "Allow Thin Clients"
+msgstr ""
-#: ../../standalone/livedrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "ĐĐ”ĐŒĐ°ĐłŃ‡Ń‹ĐŒĐ° Đ·Đ°ĐżŃƒŃŃ†Ń–Ń†ŃŒ live upgrade !!!\n"
+msgid "Georgian (\"Russian\" layout)"
+msgstr "Đ“Ń€ŃƒĐ·iĐœŃĐși (\"РусĐșая\" расĐșлаЎĐșĐ°)"
-#: ../../standalone/livedrake:1
-#, fuzzy, c-format
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#, c-format
+msgid "/_Options"
msgstr ""
-"Đ—ĐŒŃĐœiцД ĐČаш Cd-Rom!\n"
-"\n"
-"Калi ласĐșĐ°, ŃƒŃŃ‚Đ°ŃžŃ†Đ” Cd-Rom, ĐżĐ°Đ·ĐœĐ°Ń‡Đ°ĐœŃ‹ \"%s\", у ĐČаш ЮысĐșĐ°ĐČĐŸĐŽ i ĐœĐ°Ń†iŃĐœiцД OĐș "
-"ĐżĐ°ŃĐ»Ń.\n"
-"Калi ĐČы ĐœĐ” ĐŒĐ°Đ”Ń†Đ” ŃĐłĐŸ, ĐœĐ°Ń†iŃĐœiцД ĐĐŽĐŒŃĐœiць, Đșаб Đ°ĐŽĐŒŃĐœiць ŃƒŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” Đ· гэтага "
-"Cd."
-#: ../../standalone/livedrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Change Cd-Rom"
-msgstr "Đ—ĐŒŃĐœiць ĐżĐ°ĐŒĐ”Ń€Ń‹ эĐșŃ€Đ°ĐœŃƒ"
+msgid "Your printer model"
+msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
-#: ../../standalone/localedrake:1
+#: ../../any.pm:1
#, c-format
-msgid "The change is done, but to be effective you must logout"
+msgid ""
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Save as.."
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakpxe:1
+#, c-format
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
+msgstr ""
+
+#: ../../share/advertising/04-configuration.pl:1
#, fuzzy, c-format
-msgid "Please enter your email address below "
-msgstr "ĐŸĐ°ŃĐżŃ€Đ°Đ±ŃƒĐčцД яшчэ раз"
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ Đ· IĐœŃ‚ŃŃ€ĐœŃŃ‚Đ°ĐŒ"
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "alert configuration"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ°"
+msgid "Save"
+msgstr "СтартаĐČĐ°Đ” ĐŒĐ”ĐœŃŽ"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
+msgid "The %s is unsupported"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../services.pm:1
+#, c-format
+msgid "Load the drivers for your usb devices."
+msgstr ""
+
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "load setting"
-msgstr "Ń„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœĐ”"
+msgid "Disk"
+msgstr "ДацĐși"
-#: ../../standalone/logdrake:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Enter a printer device URI"
+msgstr "URI ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
+
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "service setting"
-msgstr "прылаЎа"
+msgid "Israel"
+msgstr "Iўрыт"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Xinetd Service"
-msgstr "ХДрĐČДр ЮруĐșу"
+msgid "French Guiana"
+msgstr "Đ€Ń€Đ°ĐœŃ†ŃƒĐ·ŃĐși"
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Webmin Service"
-msgstr "прылаЎа"
+#: ../../lang.pm:1
+#, c-format
+msgid "default:LTR"
+msgstr "default:LTR"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "SSH Server"
-msgstr "NIS сДрĐČДр:"
+msgid "add a rule"
+msgstr "ДаЮаць ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "A command line must be entered!"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Select user manually"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Samba Server"
-msgstr "NIS сДрĐČДр:"
+msgid "Transfer printer configuration"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ Đ· IĐœŃ‚ŃŃ€ĐœŃŃ‚Đ°ĐŒ"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Postfix Mail Server"
-msgstr "ХДрĐČДр ЮруĐșу"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "Вы жаЎаДцД, Đșаб ĐłŃŃ‚Đ°Đ” Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ” стартаĐČала пры Đ·Đ°ĐłŃ€ŃƒĐ·Ń†Ń‹?"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid ""
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
+msgstr ""
+
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Ftp Server"
-msgstr "NIS сДрĐČДр:"
+msgid "%s (Port %s)"
+msgstr "ĐŸĐŸŃ€Ń‚"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Domain Name Resolver"
-msgstr "IĐŒŃ ĐŽĐ°ĐŒĐ”ĐœŃƒ"
+msgid "Use network connection to backup"
+msgstr "Đ”Ń€ŃĐœĐœŃ‹ фаĐčĐ» Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČĐ°Đč ĐșĐŸĐżii"
-#: ../../standalone/logdrake:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Apache World Wide Web Server"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Welcome to the mail configuration utility.\n"
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
"\n"
-"Here, you'll be able to set up the alert system.\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../any.pm:1 ../../help.pm:1
+#, c-format
+msgid "Accept user"
+msgstr "ĐŸŃ€Ń‹ĐœŃŃ†ŃŒ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°"
+
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, fuzzy, c-format
-msgid "Mail alert configuration"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ADSL"
+msgid "Server"
+msgstr "сДрĐČДр"
-#: ../../standalone/logdrake:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Mail alert"
-msgstr ""
+msgid "Bad choice, try again\n"
+msgstr "Đ”Ń€ŃĐœĐœŃ‹ ĐČыбар, ĐżĐ°ŃĐżŃ€Đ°Đ±ŃƒĐčцД ŃŃˆŃ‡Đ”\n"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "please wait, parsing file: %s"
+msgid "Heard and McDonald Islands"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Content of the file"
+msgid "No alternative driver"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Calendar"
-msgstr ""
+msgid "Toggle to expert mode"
+msgstr "Đ ŃĐ¶Ń‹ĐŒ эĐșŃĐżĐ”Ń€Ń‚Ńƒ"
-#: ../../standalone/logdrake:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Choose file"
+msgid "(on this machine)"
msgstr ""
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "but not matching"
-msgstr ""
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "IP аЮрас паĐČiĐœĐ”Đœ Đ±Ń‹Ń†ŃŒ у Ń„Đ°Ń€ĐŒĐ°Ń†Đ” 1.2.3.4"
-#: ../../standalone/logdrake:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "matching"
+msgid ""
+"\"%s\" based winmodem detected, do you want to install needed software ?"
msgstr ""
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Looking at packages already installed..."
+msgstr "Вы ĐœĐ” ĐŒĐŸĐ¶Đ°Ń†Đ” Đ°ĐŽĐŒŃĐœiць ĐČŃ‹Đ»ŃƒŃ‡ŃĐœĐœĐ” гэтага паĐșĐ”Ń‚Ńƒ. ĐĐœ ŃƒĐ¶ĐŸ ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœŃ‹"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Settings"
+msgid "Use Differential Backups"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Driver"
+msgstr "сДрĐČДр"
+
+#: ../../services.pm:1
#, c-format
-msgid "A tool to monitor your logs"
+msgid ""
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer on remote lpd server"
+msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ сДрĐČДр lpd"
+
+#: ../../standalone/drakfont:1
#, c-format
-msgid "search"
+msgid ""
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "Mandrake Tools Explanation"
+msgid ""
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Syslog"
-msgstr ""
+msgid "No mouse"
+msgstr "ĐŃĐŒĐ° ĐŒŃ‹ŃˆŃ‹"
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Messages"
-msgstr "ПраĐČДрĐșĐ° ĐżĐ°Ń€Ń‚ĐŸŃž"
+#: ../../crypto.pm:1 ../../lang.pm:1
+#, c-format
+msgid "Germany"
+msgstr "ĐŃĐŒĐ”Ń†Đși"
-#: ../../standalone/logdrake:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, fuzzy, c-format
-msgid "User"
-msgstr "IĐŒŃ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșу:"
+msgid "Austria"
+msgstr "ĐżĐ°ŃĐ»ŃĐŽĐŸŃžĐœĐ°Ń"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "/Help/_About..."
+msgid "Run \"sndconfig\" after installation to configure your sound card"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "/Options/Test"
-msgstr ""
+msgid "Collapse Tree"
+msgstr "Đ—ĐłĐ°Ń€ĐœŃƒŃ†ŃŒ ЮрэĐČĐ°"
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "/File/-"
-msgstr ""
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Auto Install Configurator"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ĐżĐ°ŃĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
-#: ../../standalone/logdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "/File/Save _As"
-msgstr ""
+msgid "Configure networking"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° сДтĐși"
-#: ../../standalone/logdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "<control>S"
-msgstr ""
+msgid "Where do you want to install the bootloader?"
+msgstr "КуЮы ĐČы жаЎаДцД ŃžŃŃ‚Đ°Đ»ŃĐČаць пачатĐșĐŸĐČы Đ·Đ°ĐłŃ€ŃƒĐ·Ń‡Ń‹Đș?"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "/File/_Save"
+msgid ""
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "<control>O"
+msgid "The %s is not supported by this version of Mandrake Linux."
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "/File/_Open"
+msgid "DHCP client"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "<control>N"
-msgstr ""
+msgid "Restoring from file %s failed: %s"
+msgstr "ĐĐŽĐœĐ°ŃžĐ»Đ”ĐœĐœĐ” Đ· фаĐčла %s ĐœĐ” Đ°Ń‚Ń€Ń‹ĐŒĐ°Đ»Đ°ŃŃ: %s"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "/File/_New"
-msgstr ""
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech Mouse (ĐżĐ°ŃĐ»ŃĐŽĐŸŃžĐœĐ°Ń, стары тып C7)"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Show only for the selected day"
+msgid "Are you sure that you want to set up printing on this machine?\n"
msgstr ""
-#: ../../standalone/mousedrake:1
-#, c-format
-msgid "Emulate third button?"
-msgstr "Đ­ĐŒŃƒĐ»ŃĐČаць трэцюю ĐșĐœĐŸĐżĐșу?"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "New devfs device"
+msgstr "ĐŸŃ€Ń‹Đ»Đ°ĐŽĐ°-ŃˆĐ»ŃŽĐ·"
-#: ../../standalone/mousedrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose your mouse type."
-msgstr "ĐșĐ°Đ»i ласĐșĐ°, ĐżĐ°Đ·ĐœĐ°Ń‡Ń†Đ” тып ĐČашаĐč ĐŒŃ‹ŃˆŃ‹."
+msgid "ERROR: Cannot spawn %s."
+msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakboot:1
#, fuzzy, c-format
-msgid "Connect %s"
-msgstr "IĐŒŃ Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ"
+msgid "Boot Style Configuration"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ĐŒĐ°ĐŽŃĐŒŃƒ"
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Disconnect %s"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ISDN"
+msgid "Automatic time synchronization"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ĐŒĐ°ĐŽŃĐŒŃƒ"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
+msgid "Backup files not found at %s."
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "received"
+msgid "Thank you for choosing Mandrake Linux 9.1"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "transmitted"
-msgstr ""
+msgid "Armenian (phonetic)"
+msgstr "ĐŃ€ĐŒŃĐœŃĐși (Ń„Đ°ĐœĐ”Ń‚Ń‹Ń‡ĐœŃ‹)"
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid "received: "
-msgstr ""
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "Card model:"
+msgstr "АЮрасы ĐżĐ°ĐŒŃŃ†Ń– Đșарты (DMA)"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "sent: "
+msgid "Thin Client"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Local measure"
-msgstr "ЛаĐșĐ°Đ»ŃŒĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
+msgid "Start Server"
+msgstr "NIS сДрĐČДр:"
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "average"
+msgid "Turkmenistan"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Color configuration"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ°"
-
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
+msgid "All remote machines"
+msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakboot:1
#, fuzzy, c-format
-msgid "Connection complete."
-msgstr "IĐŒŃ Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ"
+msgid "Install themes"
+msgstr "ĐŁŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœĐ” сiŃŃ‚ŃĐŒŃ‹"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Disconnection from the Internet complete."
+msgid ""
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1
#, c-format
-msgid "Disconnection from the Internet failed."
+msgid "Espanol"
msgstr ""
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connecting to the Internet "
-msgstr "Đ”Đ°Đ»ŃƒŃ‡ŃĐœĐœĐ” ĐŽĐ° IĐœŃ‚ŃŃ€ĐœŃŃ‚Ńƒ"
-
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Disconnecting from the Internet "
-msgstr "Đ”Đ°Đ»ŃƒŃ‡ŃĐœĐœĐ” ĐŽĐ° IĐœŃ‚ŃŃ€ĐœŃŃ‚Ńƒ"
-
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Wait please, testing your connection..."
-msgstr "ĐŻĐși тып ĐČашага ISDN Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ?"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Preparing installation"
+msgstr "ĐŸĐ°ĐŽŃ€Ń‹Ń…Ń‚ĐŸŃžĐșĐ° ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœŃŒĐœŃ"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Logs"
+msgid "Edit selected host/network"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Connection Time: "
-msgstr "IĐŒŃ Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ"
+msgid "Add User -->"
+msgstr "ДаЮаць ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°"
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Receiving Speed:"
+msgid "Nauru"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Sending Speed:"
-msgstr "ЗахаĐČĐ°ĐœĐœĐ” ў фаĐčĐ»"
+msgid "True Type fonts installation"
+msgstr "ĐŸĐ°ĐŽŃ€Ń‹Ń…Ń‚ĐŸŃžĐșĐ° ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœŃŒĐœŃ"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Statistics"
+msgid "Auto-detect printers connected directly to the local network"
msgstr ""
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Profile "
-msgstr "ĐżĐ°ĐŒŃ‹Đ»ĐșĐ° ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ: "
-
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Network Monitoring"
-msgstr "ĐšĐ°ĐœŃ„iгурацыя сДтĐși"
+msgid "LAN configuration"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ADSL"
-#: ../../standalone/printerdrake:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Reading data of installed printers..."
-msgstr "Đ”Đ°ŃŃ‚ŃƒĐżĐœŃ‹Ń паĐșДты"
+msgid "hard disk model"
+msgstr "АЮрасы ĐżĐ°ĐŒŃŃ†Ń– Đșарты (DMA)"
-#: ../../standalone/scannerdrake:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Name/IP address of host:"
+msgid "You can't use a LVM Logical Volume for mount point %s"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
+msgid "Get Windows Fonts"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scannerdrake"
-msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” ĐČiЮэаĐșарту"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Iranian"
+msgstr "IŃ€Đ°ĐœŃĐși"
+
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Калі ласĐșĐ°, зрабіцД ĐœĐ”ĐșĐ°Đ»ŃŒĐșі рухаў ĐŒŃ‹ŃˆŃˆŃƒ."
+msgid "Croatia"
+msgstr "Đ„Đ°Ń€ĐČацĐși"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
-msgstr ""
+msgid "Gateway:"
+msgstr "Клюз:"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Sharing of local scanners"
-msgstr "Đ”Đ°ŃŃ‚ŃƒĐżĐœŃ‹Ń паĐșДты"
+msgid "Add server"
+msgstr "ДаЮаць ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remote printer name"
+msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
+
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "This machine"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together in order to highly reduce hacking risks."
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Device: "
+msgstr "ĐŸŃ€Ń‹Đ»Đ°ĐŽĐ°:"
+
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, fuzzy, c-format
-msgid "Remove selected host"
-msgstr "Đ’Ń‹ĐŽĐ°Đ»iць чаргу ЮруĐșу"
+msgid "Printerdrake"
+msgstr "ĐŸŃ€Ń‹ĐœŃ‚ŃŃ€"
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "License agreement"
+msgstr "Đ›Ń–Ń†ŃĐœĐ·Ń–ĐčĐœĐ°Ń ĐŽĐ°ĐŒĐŸĐČĐ°"
+
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "Edit selected host"
-msgstr "Đ’Ń‹ĐŽĐ°Đ»iць чаргу ЮруĐșу"
+msgid "System Options"
+msgstr "Опцыi ĐŒĐŸĐŽŃƒĐ»ŃŽ:"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please enter the directory where backups are stored"
+msgstr ""
+
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Add host"
-msgstr "ДаЮаць ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°"
+msgid "Please choose the desired security level"
+msgstr "ĐŁĐ·Ń€ĐŸĐČĐ”ĐœŃŒ Đ±ŃŃĐżĐ”Đși"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "These are the machines from which the scanners should be used:"
+msgid "This host is already in the list, it cannot be added again.\n"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Usage of remote scanners"
-msgstr "ВыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць ĐœĐ”Đ·Đ°ĐœŃŃ‚ŃƒŃŽ ĐżŃ€Đ°ŃŃ‚ĐŸŃ€Ńƒ"
+msgid ", USB printer"
+msgstr "IĐŒŃ ЮруĐșарĐși"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "All remote machines"
-msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
+msgid "Choose the applications that will support the fonts:"
+msgstr "Выбар разЎзДлаў ĐŽĐ»Ń Ń„Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœŃ"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
-msgstr ""
+msgid "Configure X"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° X Window"
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Use the scanners on hosts: "
-msgstr ""
+msgid "Turkish (traditional \"F\" model)"
+msgstr "бурэцĐși (Ń‚Ń€Đ°ĐŽŃ‹Ń†Ń‹Ń‘ĐœĐ°Ń \"F\" ĐŒĐ°ĐŽŃĐ»ŃŒ)"
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Use scanners on remote computers"
+msgid "Congratulations!"
+msgstr "ĐŸŃ€Ń‹ĐŒŃ–Ń†Đ” ĐČiĐœŃˆĐ°ĐČĐ°ĐœĐœi!"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Use owner id for execution"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "ĐŸŃ€Ń‹ĐœŃ‚ŃŃ€"
+msgid "Down"
+msgstr "Đ—Ń€ĐŸĐ±Đ»Đ”ĐœĐ°"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "The scanners on this machine are available to other computers"
+msgid "Raw printer (No driver)"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../network/modem.pm:1
+#, fuzzy, c-format
+msgid "Install rpm"
+msgstr "УсталёўĐșĐ°"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
-msgstr ""
+msgid "Time remaining "
+msgstr "Đ—Đ°ŃŃ‚Đ°Đ»ĐŸŃŃ часу "
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Re-generating list of configured scanners ..."
-msgstr ""
+msgid "UK keyboard"
+msgstr "UK ĐșлаĐČiятура"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for new scanners ..."
-msgstr "Đ”Đ°ŃŃ‚ŃƒĐżĐœŃ‹Ń паĐșДты"
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Unmount"
+msgstr "Đ Đ°Đ·ĐŒĐ°ĐœŃ†iраĐČаць"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Searching for configured scanners ..."
-msgstr "Đ”Đ°ŃŃ‚ŃƒĐżĐœŃ‹Ń паĐșДты"
+msgid "Uninstall Fonts"
+msgstr "Đ’Ń‹ĐŽĐ°Đ»Đ”ĐœĐœĐ” ĐČŃ‹Đ±Ń€Đ°ĐœŃ‹Ń… RPM-паĐșДтаў Đ· сiŃŃ‚ŃĐŒŃ‹"
-#: ../../standalone/scannerdrake:1
+#: ../../mouse.pm:1
#, fuzzy, c-format
-msgid "Scanner sharing"
-msgstr "ĐŸŃ€Ń‹ĐœŃ‚ŃŃ€"
+msgid "Microsoft Explorer"
+msgstr "Microsoft IntelliMouse"
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Add a scanner manually"
+msgid "German (no dead keys)"
+msgstr "ĐŃĐŒĐ”Ń†Đși (ĐœŃĐŒĐ° заблаĐșiраĐČĐ°ĐœŃ‹Ń… ĐșлаĐČiш)"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transferring %s..."
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Search for new scanners"
-msgstr "Đ”Đ°ŃŃ‚ŃƒĐżĐœŃ‹Ń паĐșДты"
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "32 thousand colors (15 bits)"
+msgstr "32 тысячы ĐșĐŸĐ»Đ”Ń€Đ°Ńž (15 бiтаў)"
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "There are no scanners found which are available on your system.\n"
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
-msgstr "ĐŁ ĐČашаĐč ŃŃ–ŃŃ‚ŃĐŒĐ” ĐœŃĐŒĐ° ĐœiĐČĐŸĐŽĐœĐ°ĐłĐ° сДтĐșĐ°ĐČага аЮаптара!"
+msgid "Reboot"
+msgstr "Root"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Gambia"
+msgstr ""
+
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
+msgid "Mandrake Control Center"
+msgstr "Đ”Đ°Đ»ŃƒŃ‡ŃĐœĐœĐ” ĐŽĐ° IĐœŃ‚ŃŃ€ĐœŃŃ‚Ńƒ"
+
+#: ../../network/drakfirewall.pm:1
+#, c-format
msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr "ĐŁ ĐČашаĐč ŃŃ–ŃŃ‚ŃĐŒĐ” ĐœŃĐŒĐ° ĐœiĐČĐŸĐŽĐœĐ°ĐłĐ° сДтĐșĐ°ĐČага аЮаптара!"
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "choose device"
-msgstr "Đ—Đ°ĐłŃ€ŃƒĐ·Đ°Ń‡ĐœĐ°Ń прылаЎа"
+msgid "\t-Tape \n"
+msgstr "бып: "
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakhelp:1
#, c-format
-msgid "Please select the device where your %s is attached"
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Searching for scanners ..."
-msgstr "Đ”Đ°ŃŃ‚ŃƒĐżĐœŃ‹Ń паĐșДты"
+msgid "Remember this password"
+msgstr "ĐŃĐŒĐ° ĐżĐ°Ń€ĐŸĐ»ŃŽ"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Auto-detect available ports"
-msgstr "ĐĐŽĐŽĐ°Đ»Đ”ĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
+msgid "Internet Connection Sharing is now enabled."
+msgstr "ĐĄŃƒĐŒĐ”ŃĐœĐ°Đ” IĐœŃ‚ŃŃ€ĐœŃŃ‚-Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ” зараз ĐŒĐ°ĐłŃ‡Ń‹ĐŒĐ°"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
+msgid "\t-Network by SSH.\n"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
msgstr ""
+#: ../../help.pm:1 ../../install_interactive.pm:1
+#, c-format
+msgid "Use the free space on the Windows partition"
+msgstr "ВыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаць ĐœĐ”Đ·Đ°ĐœŃŃ‚ŃƒŃŽ ĐżŃ€Đ°ŃŃ‚ĐŸŃ€Ńƒ ĐœĐ° разЎзДлД Windows"
+
#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "%s found on %s, configure it automatically?"
+msgstr "ЖаЎаДцД ĐœĐ°ŃŃ‚Ń€ĐŸiць ĐżŃ€Ń‹ĐœŃ‚ŃŃ€?"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "The %s is unsupported"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "The %s is not known by this version of Scannerdrake."
+msgid "XFree86 driver: %s\n"
+msgstr "ХДрĐČДр XFree86: %s\n"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "This host/network is already in the list, it cannot be added again.\n"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
+msgid ""
+"\n"
+" DrakBackup Report \n"
+"\n"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Port: %s"
-msgstr "ĐŸĐŸŃ€Ń‚"
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the packages you want to install"
+msgstr "Выбар паĐșДтаў ĐŽĐ»Ń ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœĐœŃ"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid ", "
+msgid "Papua New Guinea"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Detected model: %s"
-msgstr "Đ”ŃƒĐ±Đ»ŃĐČĐ°ĐœĐœĐ” ĐżŃƒĐœĐșту ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ %s"
+msgid "Serbian (cyrillic)"
+msgstr "АзДрбаĐčĐŽĐ¶Đ°ĐœŃĐșі (Đșірыліца)"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid " ("
+msgid "Make kernel message quiet by default"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Select a scanner model"
-msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” ĐČiЮэаĐșарту"
+msgid ""
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
+msgstr "ЖаЎаДцД пратэсцiраĐČаць ЮруĐș?"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
+msgid "The DHCP end range"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "ЖаЎаДцД ĐœĐ°ŃŃ‚Ń€ĐŸiць ĐżŃ€Ń‹ĐœŃ‚ŃŃ€?"
+#: ../../any.pm:1
+#, c-format
+msgid "Creating bootdisk..."
+msgstr "СтĐČĐ°Ń€ŃĐœĐœĐ” Đ·Đ°ĐłŃ€ŃƒĐ·Đ°Ń‡ĐœĐ°Đč ЮысĐșДты"
-#: ../../standalone/service_harddrake:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Hardware probing in progress"
-msgstr "Đ”ŃƒĐ±Đ»ŃĐČĐ°ĐœĐœĐ” ĐżŃƒĐœĐșту ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ %s"
+msgid "Wait please, testing your connection..."
+msgstr "ĐŻĐși тып ĐČашага ISDN Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ?"
-#: ../../standalone/service_harddrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Some devices were added:\n"
-msgstr ""
+msgid "Bringing down the network"
+msgstr "ĐĐŽĐ»ŃƒŃ‡ŃĐœĐœĐ” Đ°ĐŽ сДтĐși"
-#: ../../standalone/service_harddrake:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr ""
+msgid "Login ID"
+msgstr "IĐŒŃ (login ID)"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
msgstr ""
+"NFS - гэта ĐČŃĐŽĐŸĐŒŃ‹ пратаĐșĐŸĐ» ĐŽĐ»Ń ĐŽĐŸŃŃ‚ŃƒĐżŃƒ ĐŽĐ° фаĐčлаў праз TCP/IP\n"
+"сДтĐși. Гэтая служба ўплыĐČĐ°Đ” ĐœĐ° ĐœĐ°ŃŃžĐœĐ°ŃŃ†ŃŒ суĐČŃĐ·i ĐżĐ°ĐŒiж NFS фаĐčĐ»Đ°ĐŒi."
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Welcome to the Open Source world."
+msgid "DHCP Client"
msgstr ""
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
+msgid "dismiss"
msgstr ""
-#: ../../share/advertising/02-community.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing/Scanning on \"%s\""
+msgstr "ĐĐŽĐ»ŃƒŃ‡ŃĐœĐœĐ” Đ°ĐŽ сДтĐși"
+
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
+msgid "omit raid modules"
msgstr ""
-#: ../../share/advertising/02-community.pl:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
+"lpd - гэты ĐŽŃĐŒĐ°Đœ ЮруĐșу, ĐżĐ°Ń‚Ń€ŃĐ±ĐœŃ‹ ĐŽĐ»Ń ĐșарэĐșŃ‚ĐœĐ°Đč працы lpr. Гэта\n"
+"сДрĐČДр, яĐși ĐșiŃ€ŃƒĐ” працаĐč ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ(аў)."
-#: ../../share/advertising/02-community.pl:1
-#, c-format
-msgid "Build the future of Linux!"
-msgstr ""
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Internet Connection Configuration"
+msgstr "IĐœŃ‚ŃŃ€ĐœŃŃ‚ Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ” i ĐșĐ°ĐœŃ„iгурацыя"
-#: ../../share/advertising/03-software.pl:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
+msgid "comma separated numbers"
msgstr ""
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
msgstr ""
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
+msgid "Move selected rule up one level"
msgstr ""
-#: ../../share/advertising/04-configuration.pl:1
-#, c-format
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
+"The following scanner\n"
+"\n"
+"%s\n"
+"is available on your system.\n"
+msgstr "ĐŁ ĐČашаĐč ŃŃ–ŃŃ‚ŃĐŒĐ” ĐœŃĐŒĐ° ĐœiĐČĐŸĐŽĐœĐ°ĐłĐ° сДтĐșĐ°ĐČага аЮаптара!"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ Đ· IĐœŃ‚ŃŃ€ĐœŃŃ‚Đ°ĐŒ"
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "ĐŠi жаЎаДцД пратэсцiраĐČаць ĐœĐ°ŃŃ‚Ń€ĐŸĐčĐși?"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "I can't find any room for installing"
+msgstr "ДаЮаць разЎзДл ĐœĐ”ĐŒĐ°ĐłŃ‡Ń‹ĐŒĐ°"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Default printer"
+msgstr "ЛаĐșĐ°Đ»ŃŒĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
+
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
msgstr ""
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "A customizable environment"
-msgstr ""
+msgid "Modify RAID"
+msgstr "Đ—ĐŒŃĐœiць RAID"
-#: ../../share/advertising/06-development.pl:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
msgstr ""
+"Đ’Ń‹Đ·ĐœĐ°Ń‡Đ°ĐœĐ° ISDN PCI Đșарта, алД ĐœĐ”ĐČŃĐŽĐŸĐŒŃ‹ ŃĐ” тып. Калi ласĐșĐ°, ĐżĐ°Đ·ĐœĐ°Ń‡Ń†Đ” PCI "
+"Đșарту ĐœĐ° ĐœĐ°ŃŃ‚ŃƒĐżĐœŃ‹ĐŒ эĐșŃ€Đ°ĐœĐ”."
-#: ../../share/advertising/06-development.pl:1
+#: ../../any.pm:1
#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr ""
+msgid "Add user"
+msgstr "ДаЮаць ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșĐ°"
-#: ../../share/advertising/07-server.pl:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "RAID-disks %s\n"
+msgstr "RAID-ЮысĐși %s\n"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Liberia"
+msgstr "ĐżĐ°ŃĐ»ŃĐŽĐŸŃžĐœĐ°Ń"
+
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
msgstr ""
-#: ../../share/advertising/07-server.pl:1
+#: ../../steps.pm:1
#, c-format
-msgid "Turn your computer into a reliable server"
-msgstr ""
+msgid "Choose your keyboard"
+msgstr "Выбар ĐșлаĐČiятуры"
-#: ../../share/advertising/08-store.pl:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
-msgstr ""
+msgid "Format partitions"
+msgstr "Đ€Đ°Ń€ĐŒĐ°Ń‚Đ°ĐČĐ°ĐœĐœĐ” разЎзДлаў"
-#: ../../share/advertising/08-store.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Automatic correction of CUPS configuration"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ĐŒĐ°ĐŽŃĐŒŃƒ"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Running \"%s\" ..."
+msgstr "Чытаю базу ĐŽĐ°ĐŽĐ·Đ”ĐœŃ‹Ń… ЮраĐčĐČĐ”Ń€ĐŸŃž CUPS"
+
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "The official MandrakeSoft Store"
+msgid "enable radio support"
msgstr ""
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scanner sharing to hosts: "
+msgstr "ĐŸŃ€Ń‹ĐœŃ‚ŃŃ€"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
-msgstr ""
+msgid "Loopback file name: %s"
+msgstr "IĐŒŃ фаĐčлу ĐČiŃ€Ń‚ŃƒĐ°Đ»ŃŒĐœĐ°Đč фаĐčлаĐČĐ°Đč сiŃŃ‚ŃĐŒŃ‹: %s"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "Да яĐșĐŸĐłĐ° ĐżĐ°ŃĐ»ŃĐŽĐŸŃžĐœĐ°ĐłĐ° ĐżĐŸŃ€Ń‚Ńƒ ĐŽĐ°Đ»ŃƒŃ‡Đ°ĐœŃ‹ ĐŒĐ°ĐŽŃĐŒ?"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
+msgid "Do not transfer printers"
msgstr ""
-#: ../../share/advertising/10-security.pl:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Delay before booting the default image"
+msgstr "Đ—Đ°Ń‚Ń€Ń‹ĐŒĐșĐ° пДраЎ Đ·Đ°ĐłŃ€ŃƒĐ·ĐșĐ°Đč ĐČĐŸĐ±Ń€Đ°Đ·Ńƒ па ĐŽĐ°ĐŒĐ°ŃžĐ»Đ”ĐœĐœŃŽ"
+
+#: ../../standalone/drakfont:1
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+" DUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
msgstr ""
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check for multisession CD"
+msgstr "ĐĐ°Ń†Ń–ŃĐœŃ–Ń†Đ” ĐœĐ° разЎзДл"
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "user"
+msgstr "IĐŒŃ ĐșĐ°Ń€Ń‹ŃŃ‚Đ°Đ»ŃŒĐœiĐșу:"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Hard Disk to backup"
+msgstr "Đ”Ń€ŃĐœĐœŃ‹ фаĐčĐ» Ń€ŃĐ·Đ”Ń€ĐČĐŸĐČĐ°Đč ĐșĐŸĐżii"
+
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Configure"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° X Window"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scannerdrake"
+msgstr "ĐĐ±ŃŃ€Ń‹Ń†Đ” ĐČiЮэаĐșарту"
+
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Optimize your security by using Mandrake Linux"
+msgid ""
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
msgstr ""
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This product is available on the MandrakeStore Web site."
+msgid "Backup Users"
msgstr ""
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
msgstr ""
+"ĐŁĐČŃĐŽĐ·iцД iĐŒŃ сĐČаёĐč ĐŒĐ°ŃˆŃ‹ĐœŃ‹ (host).\n"
+"IĐŒŃ ĐČашаĐč ĐŒĐ°ŃˆŃ‹ĐœŃ‹ паĐČiĐœĐœĐ° Đ±Ń‹Ń†ŃŒ Đ·Đ°ĐŽĐ°ĐŽĐ·Đ”ĐœĐ° ĐżĐŸŃžĐœĐ°ŃŃ†ŃŽ,\n"
+"ĐœĐ°ĐżŃ€Ń‹ĐșлаЎ ``mybox.mylab.myco.com''.\n"
+"Вы ĐŒĐŸĐ¶Đ°Ń†Đ” таĐșŃĐ°ĐŒĐ° ўĐČДсцi IP аЮрас ŃˆĐ»ŃŽĐ·Ńƒ, ĐșĐ°Đ»i Ń‘Đœ у ĐČас ёсць."
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Select Printer Spooler"
+msgstr "Выбар тыпу Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€Ńƒ"
+
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Create new theme"
+msgstr "СтĐČĐ°Ń€ŃĐœĐœĐ” ĐœĐŸĐČага Ń€Đ°Đ·ĐŽĐ·Đ”Đ»Ńƒ"
+
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
+msgid "Mandrake Tools Explanation"
msgstr ""
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "No image found"
+msgstr "ЛаĐșĐ°Đ»ŃŒĐœŃ‹ ĐżŃ€Ń‹ĐœŃ‚ŃŃ€"
+
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
msgstr ""
+"ĐĐ”ĐșĐ°Ń‚ĐŸŃ€Ń‹Ń ĐČĐ°Đ¶ĐœŃ‹Ń паĐșДты ĐœĐ” былi ŃžŃŃ‚Đ°Đ»ŃĐČĐ°ĐœŃ‹ ĐșарэĐșŃ‚ĐœĐ°.\n"
+"Другi ĐČаш cdrom ЮысĐș цi ĐČаш cdrom ĐŒĐ°ŃŽŃ†ŃŒ ĐŽŃŃ„Đ”Đșты.\n"
+"ПраĐČДрцД cdrom ĐœĐ° ĐČĐ°ŃˆŃ‹ĐŒ ĐșĐ°ĐŒĐżŃƒŃ‚Đ°Ń€Ń‹, ĐČыĐșĐ°Ń€Ń‹ŃŃ‚ĐŸŃžĐČаючы\"rpm -qpl Mandrake/RPMS/*."
+"rpm\"\n"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Detected model: %s"
+msgstr "Đ”ŃƒĐ±Đ»ŃĐČĐ°ĐœĐœĐ” ĐżŃƒĐœĐșту ĐŒĐ°ĐœŃ†iраĐČĐ°ĐœĐœŃ %s"
+
+#: ../../standalone/drakedm:1
#, c-format
msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, run the daily security checks."
+msgstr ""
+
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Become a MandrakeExpert"
-msgstr "эĐșспДрт"
+msgid "Azerbaijan"
+msgstr "IŃ€Đ°ĐœŃĐși"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
+msgid "No tape in %s!"
msgstr ""
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "An online platform to respond to enterprise support needs."
+msgid "Dvorak (US)"
+msgstr "Dvorak (US)"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid ""
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "How is the printer connected?"
+msgstr "ĐŻĐș ĐżŃ€Ń‹ĐœŃ‚Đ°Ń€ ĐŽĐ°Đ»ŃƒŃ‡Đ°ĐœŃ‹?"
+
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "эĐșспДрт"
+msgid "Security level"
+msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐși ŃžĐ·Ń€ĐŸŃžĐœŃ Đ±ŃŃĐżĐ”Đși"
+
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "final resolution"
+msgstr "ĐŸĐ°ĐŒĐ”Ń€Ń‹ эĐșŃ€Đ°ĐœŃƒ"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
+#, fuzzy, c-format
+msgid "Services"
+msgstr "прылаЎа"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "4 MB"
+msgstr "4 ĐœĐ±"
#: ../../share/compssUsers:999
#, fuzzy
@@ -17024,11 +17062,6 @@ msgstr ""
#: ../../share/compssUsers:999
#, fuzzy
-msgid "Workstation"
-msgstr "НаĐČуĐșĐŸĐČыя прыĐșĐ»Đ°ĐŽĐ°ĐœĐœŃ–"
-
-#: ../../share/compssUsers:999
-#, fuzzy
msgid "Game station"
msgstr "ĐœŃƒĐ»ŃŒŃ‚Ń‹ĐŒĐ”ĐŽŃ‹Ń - гуĐș"
@@ -17108,10 +17141,6 @@ msgstr ""
"Ń–ĐœŃŃ‚Ń€ŃƒĐŒĐ”ĐœŃ‚Đ°Đ»ŃŒĐœŃ‹Ń… ŃŃ€ĐŸĐŽĐșаў"
#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
#, fuzzy
msgid "Gnome Workstation"
msgstr "НаĐČуĐșĐŸĐČыя прыĐșĐ»Đ°ĐŽĐ°ĐœĐœŃ–"
@@ -17133,11 +17162,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr ""
#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Development"
-msgstr "Ń€Đ°ŃĐżŃ€Đ°Ń†ĐŸŃžŃˆŃ‡Ń‹Đș"
-
-#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "Đ‘Ń–Đ±Đ»Ń–ŃŃ‚ŃĐșі і ĐżŃ€Đ°ĐłŃ€Đ°ĐŒŃ‹ ĐŽĐ»Ń Ń€Đ°ŃĐżŃ€Đ°Ń†ĐŸŃžĐșі ĐœĐ° ĐĄ і ĐĄ++"
@@ -17211,40 +17235,88 @@ msgstr ""
#: ../../share/compssUsers:999
#, fuzzy
-msgid "Audio station"
-msgstr "ĐœŃƒĐ»ŃŒŃ‚Ń‹ĐŒĐ”ĐŽŃ‹Ń - гуĐș"
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr ""
+"ПрыĐșĐ»Đ°ĐŽĐ°ĐœĐœŃ– ĐŽĐ»Ń Ń‡Ń‹Ń‚Đ°ĐœĐœŃ і аЮпраўĐșі ĐżĐŸŃˆŃ‚Ń‹ і ĐœĐ°ĐČŃ–ĐœĐ°Ńž (pine, mutt, tin...), "
+"Web Đ°ĐłĐ»ŃĐŽĐ°Đ»ŃŒĐœŃ–Đșі"
+
+#~ msgid "Internet connection & configuration"
+#~ msgstr "IĐœŃ‚ŃŃ€ĐœŃŃ‚ Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ” i ĐșĐ°ĐœŃ„iгурацыя"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Sound playing/editing programs"
-msgstr "РэЮаĐșтары і праĐčграĐČĐ°Đ»ŃŒĐœŃ–Đșі гуĐșу і ĐČіЮэа"
+#~ msgid "Configure the connection"
+#~ msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° сДтĐși"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Video station"
-msgstr "ĐœŃƒĐ»ŃŒŃ‚Ń‹ĐŒĐ”ĐŽŃ‹Ń - гуĐș"
+#~ msgid "Disconnect"
+#~ msgstr "ĐĐ°ŃŃ‚Ń€ĐŸĐčĐșĐ° ISDN"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Video playing programs"
-msgstr "РэЮаĐșтары і праĐčграĐČĐ°Đ»ŃŒĐœŃ–Đșі гуĐșу і ĐČіЮэа"
+#~ msgid "Connect"
+#~ msgstr "IĐŒŃ Đ·Đ»ŃƒŃ‡ŃĐœĐœŃ"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Graphic station"
-msgstr "ĐœŃƒĐ»ŃŒŃ‚Ń‹ĐŒĐ”ĐŽŃ‹Ń - гуĐș"
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Вы ĐŒĐŸĐ¶Đ°Ń†Đ” Đ°ĐŽĐșлючыцца ці пДраĐșĐ°ĐœŃ„Ń–ĐłŃƒŃ€Đ°ĐČаць ĐČашаД Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ”."
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Graphics programs"
-msgstr "Đ“Ń€Đ°Ń„Ń–Ń‡ĐœŃ‹Ń ĐżŃ€Đ°ĐłŃ€Đ°ĐŒŃ‹ тыпу The Gimp"
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Вы ĐŒĐŸĐ¶Đ°Ń†Đ” Đ°ĐŽĐșлючыцца ці пДраĐșĐ°ĐœŃ„Ń–ĐłŃƒŃ€Đ°ĐČаць ĐČашаД Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ”."
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr ""
-"ПрыĐșĐ»Đ°ĐŽĐ°ĐœĐœŃ– ĐŽĐ»Ń Ń‡Ń‹Ń‚Đ°ĐœĐœŃ і аЮпраўĐșі ĐżĐŸŃˆŃ‚Ń‹ і ĐœĐ°ĐČŃ–ĐœĐ°Ńž (pine, mutt, tin...), "
-"Web Đ°ĐłĐ»ŃĐŽĐ°Đ»ŃŒĐœŃ–Đșі"
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "ĐŻĐș ĐČы ĐżĐ»Đ°ĐœŃƒĐ”Ń†Đ” ĐŽĐ°Đ»ŃƒŃ‡Ń‹Ń†Ń†Đ° ĐŽĐ° IĐœŃ‚ŃŃ€ĐœŃŃ‚Ńƒ?"
+
+#~ msgid ""
+#~ "\n"
+#~ "You can disconnect or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Вы ĐŒĐŸĐ¶Đ°Ń†Đ” Đ°ĐŽĐșлючыцца ці пДраĐșĐ°ĐœŃ„Ń–ĐłŃƒŃ€Đ°ĐČаць ĐČашаД Đ·Đ»ŃƒŃ‡ŃĐœĐœĐ”."
+
+#, fuzzy
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "ĐŻĐș ĐČы ĐżĐ»Đ°ĐœŃƒĐ”Ń†Đ” ĐŽĐ°Đ»ŃƒŃ‡Ń‹Ń†Ń†Đ° ĐŽĐ° IĐœŃ‚ŃŃ€ĐœŃŃ‚Ńƒ?"
+
+#, fuzzy
+#~ msgid "Write %s"
+#~ msgstr "ХДрĐČДр XFree86 %s"
+
+#, fuzzy
+#~ msgid "Author:"
+#~ msgstr "ĐŃžŃ‚Đ°ĐżĐŸŃˆŃƒĐș"
+
+#, fuzzy
+#~ msgid "Audio station"
+#~ msgstr "ĐœŃƒĐ»ŃŒŃ‚Ń‹ĐŒĐ”ĐŽŃ‹Ń - гуĐș"
+
+#, fuzzy
+#~ msgid "Sound playing/editing programs"
+#~ msgstr "РэЮаĐșтары і праĐčграĐČĐ°Đ»ŃŒĐœŃ–Đșі гуĐșу і ĐČіЮэа"
+
+#, fuzzy
+#~ msgid "Video station"
+#~ msgstr "ĐœŃƒĐ»ŃŒŃ‚Ń‹ĐŒĐ”ĐŽŃ‹Ń - гуĐș"
+
+#, fuzzy
+#~ msgid "Video playing programs"
+#~ msgstr "РэЮаĐșтары і праĐčграĐČĐ°Đ»ŃŒĐœŃ–Đșі гуĐșу і ĐČіЮэа"
+
+#, fuzzy
+#~ msgid "Graphic station"
+#~ msgstr "ĐœŃƒĐ»ŃŒŃ‚Ń‹ĐŒĐ”ĐŽŃ‹Ń - гуĐș"
+
+#, fuzzy
+#~ msgid "Graphics programs"
+#~ msgstr "Đ“Ń€Đ°Ń„Ń–Ń‡ĐœŃ‹Ń ĐżŃ€Đ°ĐłŃ€Đ°ĐŒŃ‹ тыпу The Gimp"
#, fuzzy
#~ msgid "Printer sharing"
diff --git a/perl-install/share/po/bg.po b/perl-install/share/po/bg.po
index 10964709c..f6e7d7368 100644
--- a/perl-install/share/po/bg.po
+++ b/perl-install/share/po/bg.po
@@ -3,1014 +3,1689 @@
# Copyright (c) 2000 MandrakeSoft
# Bozhan Boiadzhiev <bozhan@plov.omega.bg>, 2000.
# Borislav Aleksandrov <B.Aleksandrov@cnsys.bg>, 2003
+# Boyan Ivanov <boyan17@bulgaria.com>, 2003
#
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX-bg\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
-"PO-Revision-Date: 2003-02-19 20:42+0200\n"
-"Last-Translator: Borislav Aleksandrov <B.Aleksandrov@cnsys.bg>\n"
-"Language-Team: Bulgarian <bg@li.org>\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
+"PO-Revision-Date: 2003-04-26 15:27+0300\n"
+"Last-Translator: Boyan Ivanov <boyan17@bulgaria.com>\n"
+"Language-Team: Bulgarian\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=CP1251\n"
"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 1.0\n"
+"X-Generator: KBabel 1.0.1\n"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Scanning partitions to find mount points"
+msgstr "Ïđćòúđńâàíć íà äÿëîâćòć çà íàìèđàíć íà òîśêè íà ìîíòèđàíć"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of suid root files."
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t\tErase=%s"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "network printer port"
+msgstr "ïîđò íà ìđćæîâ ïđèíòćđ "
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Please insert floppy disk:"
+msgstr "Ńëîæćòć ôëîïè äèńêćòà:"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "PCMCIA"
+msgstr "PCMCIA"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
+"The backup partition table has not the same size\n"
+"Still continue?"
msgstr ""
+"Đćçćđâíàòà òàáëèöà íà äÿëîâćòć íć ć ńúń ńúùàòà ăîëćìèíà\n"
+"Äà ïđîäúëæà ëè âńć ïàê ?"
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Cancel"
-msgstr "Îòêàç"
+msgid "Which username"
+msgstr "Êîć ïîòđćáèòćëńêî èìć"
#: ../../any.pm:1
#, c-format
-msgid "Launch userdrake"
-msgstr "Ńòàđòèđà userdrake"
+msgid "Which type of entry do you want to add?"
+msgstr "Êàêúâ òèï èíôîđìàöèÿ èńêàòć äà ïđèáàâèòć"
-#: ../../any.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Restore partition table"
+msgstr "Âúçńòàíîâè òàáëèöàòà ń äÿëîâćòć"
+
+#: ../../printer/cups.pm:1
+#, c-format
+msgid "On CUPS server \"%s\""
+msgstr "Íà CUPS ńúđâúđ \"%s\""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Post-install configuration"
+msgstr "Ńëćä èíńòàëàöèîííà íàńòđîéêà"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``%s'' instead"
+msgstr "Âìćńòî òîâà èçïîëçâàéòć ``%s''"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Type"
+msgstr "Âèä"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
"\n"
-"\"Custom\" permit a per-user granularity.\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
msgstr ""
-"Èńêàòć ëè äà ïîçâîëèòć íà ïîòđćáèòćëè äà ïîäćëÿò òćőíèòć äèđćêòîđèè?\n"
-"Đàçđćűàâàíćòî íà òîâà ùć ïîçâîëè íà ïîòđćáèòćëèòć ïđîńòî äà öúêíàò íà "
-"\"Ïîäćëÿ\" â konqueror èëè nautilus.\n"
"\n"
-"\"Êëèćíòńêà\" ïîçâîëÿâà çà ïîòđćáèòćë íàńòđîéêà.\n"
+"Ńúùî òàêà, ïđèíòćđè íàńòđîćíè ń PPD ôàéëîâć ïđćäîńòàâćíè îò ïđîèçâîäèòćëèòć "
+"èì èëè ń îđèăèíàëíè CUPS äđàéâćđè íć ìîăàò äà áúäàò ïđćőâúđëÿíè."
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Çàäúëæèòćëíèÿò ïàêćò %s ëèïńâà"
+msgid "Sri Lanka"
+msgstr "Űđè Ëàíêà"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
-"Âèć ìîæć äà ćêńïîđòèđàòć êàòî èçïîëçâàòć NFS èëè Samba. Ìîëÿ, èçáćđćòć êàêâî "
-"èńêàòć äà èçïîëçâàòć."
+"Ńëćäíèÿ ïđèíòćđ\n"
+"\n"
+"%s%s\n"
+"ć äèđćêòíî ńâúđçàíè êúì âàűàòà ńèńòćìà"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
+msgid "Central African Republic"
+msgstr "Öćíòđàëíîàôđèêàíńêà Đćïóáëèêà"
+
+#: ../../network/network.pm:1
+#, c-format
+msgid "Gateway device"
+msgstr "Gateway óńòđîéńòâî"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Net Method:"
msgstr ""
-"Ïàêćò %s òđÿáâà äà áúäć èíńòàëèđàí\n"
-"Èńêàòć äà ăî èíńòàëèđàòć?"
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Custom"
-msgstr "Êëèćíòńêà"
+msgid "Ethernetcard"
+msgstr "Ethernet êàđòà"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Allow all users"
-msgstr "Ïîçâîëÿâà íà ïîòđćáèòćëè"
+msgid "Parameters"
+msgstr "Ïàđàìćòđè"
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "No sharing"
-msgstr "Íć ïîäćëÿ"
+msgid "Auto-detect"
+msgstr "Àâòîìàòèśíî çàńèśàíć"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "More"
-msgstr "Îùć"
+msgid "Interface:"
+msgstr "Èíòćđôćéń:"
-#: ../../any.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Here is the full list of available countries"
-msgstr "Ćòî ïúëćí ńïèńúê íà äîńòđúïíèòć ńòđàíè"
+msgid "Select installation class"
+msgstr "Èçáîđ íà êëàń èíńòàëàöèÿ"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose your country."
-msgstr "Ìîëÿ, èçáćđćòć âàűàòà ńòđàíà."
+msgid "on CDROM"
+msgstr ""
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid " / Region"
-msgstr "Đèțíèúí"
+#: ../../network/tools.pm:1
+#, c-format
+msgid ""
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
+msgstr ""
+"Ńèńòćìàòà íć èçăëćæäà ńâúđçàíà êúì Èíòćđíćò.\n"
+"Îïèòàéòć ńć äà ïđćíàńòđîèòć âđúçêàòà."
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Country"
-msgstr "Ńòđàíà"
+msgid ""
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
+msgstr ""
+"Ńâúđçâà âàűèÿò ïđèíòćđ êúì Linux ńúđâúđ è ïîçâîëÿâà Windows ìàűèíè äà ńć "
+"ńâúđçâàò êúì íćăî êàòî êëèćíòè.\n"
+"\n"
+"Èńêàòć ëè, äà ïđîäúëæèòć íàńòđîéêèòć çà òîçè ïđèíòćđ êàêòî ïđàâćőòć äî ńćăà?"
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "All languages"
-msgstr "Èçáîđ íà ćçèê"
+#: ../../lang.pm:1
+#, c-format
+msgid "Belarus"
+msgstr "Áćëàđóń"
-#: ../../any.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Use Unicode by default"
-msgstr "Èçïîëçâà óíèêîä ïî ïîäđàçáèđàíć"
+msgid "Error writing to file %s"
+msgstr "Ăđćűêà ïđè çàïèń âúâ ôàéëà %s"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
msgstr ""
-"Mandrake Linux ìîæć äà ïîäúđæà ìíîăî ćçèöè. Èçáćđćòć\n"
-"ćçèöèòć êîèòî èńêàòć àä èíńòàëèđàòć. Òć ùć áúäàò íàëèśíè ńëćä\n"
-"êàòî çàâúđűè èíńòàëàöèÿòà è âèć ïđćńòàđòèđàòć ńèńòćìàòà."
+"apmd ńć èçïîëçâà çà íàáëțäćíèć íà áàòćđèÿòà è çàïèńâàéêè ńòàòóńà śđćç\n"
+"syslog. Ìîæć ńúùî äà ńć èçïîëçâà çà ńïèđàíć íà ìàűèíàòà, êîăàòî áàòćđèÿòà ć "
+"èçòîùćíà."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose a language to use."
-msgstr "Ìîëÿ, èçáćđćòć ćçèê çà èçïîëçâàíć."
+msgid "Use tape to backup"
+msgstr "Èçïîëçâà ëćíòà çà đćçćđâíî êîïèć"
-#: ../../any.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Choose the window manager to run:"
-msgstr "Èçáćđćòć ìćíèäæúđ íà ïđîçîđöè çà ńòàđòèđàíć:"
+msgid "The following packages are going to be installed"
+msgstr "Ńëćäíèòć ïàêćòè ùć áúäàò èíńòàëèđàíè"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the default user:"
-msgstr "Èçáćđćòć ïîäđàçáèđàù ńć ïîòđćáèòćë :"
+msgid "CUPS configuration"
+msgstr "CUPS êîíôèăóđàöèÿ"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to use this feature?"
-msgstr "Èńêàòć ëè äà èçïîëçâàòć òàçè îńîáćíîńò?"
+msgid "Hong Kong"
+msgstr "Őîíă Êîíă"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "I can set up your computer to automatically log on one user."
+msgid "Not enough free space to allocate new partitions"
+msgstr "Íÿìà äîńòàòúśíî ìÿńòî çà ńúçäàâàíć íà íîâ äÿë"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving"
+msgstr "Ìćńòćíć"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
msgstr ""
-"Ìîăà äà íàńòđîÿ êîìïțòúđà âè çà âëèçàíć â ńèńòćìàòà àâòîìàòèśíî êàòî íÿêîé "
-"ïîòđćáèòćë."
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Autologin"
-msgstr "Àâòîìàòèśíî âëèçà"
+msgid "("
+msgstr ""
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Icon"
-msgstr "Èêîíà"
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgstr ""
+"Äîáđć äîűëè ïđè ìàăüîńíèêà çà íàńòđîéêà íà ìđćæà\n"
+"\n"
+"Âèć ńòć íà ïúò äà íàńòđîèòć Èíòćđíćò/ìđćæîâàòà ńè âđúçêà.\n"
+"Àêî íć èńêàòć äà èçïîëçâàòć àâòîìàòèśíî çàńèśàíć, èçêëțśćòć êóòèéêàòà.\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "Shell"
-msgstr "Űćë"
+msgid ")"
+msgstr ""
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Password (again)"
-msgstr "Ïàđîëà (îòíîâî)"
+msgid "Lebanon"
+msgstr "Ëèâàí"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Password"
-msgstr "Ïàđîëà"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "User name"
-msgstr "Ïîòđćáèòćëńêî èìć"
+msgid "Stop"
+msgstr "Ńòîï"
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Edit selected host"
+msgstr "çàńćśćíà %s"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Real name"
-msgstr "Èńòèíńêî èìć"
+msgid "No CD device defined!"
+msgstr "Íć ć äèôèíèđàíî CD óńòđîéńòâî!"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Accept user"
-msgstr "Ïđèćìè ïîòđćáèòćë"
+msgid "Bulgarian (phonetic)"
+msgstr "Áúëăàđńêà (ôîíćòèśćí)"
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Done"
-msgstr "Ăîòîâî"
+msgid "The DHCP start ip"
+msgstr ""
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "256 kB"
+msgstr "256 ÊÁ"
#: ../../any.pm:1
#, c-format
+msgid "Bootloader main options"
+msgstr "Îïöèè íà çàđćæäàùàòà ïđîăđàìà"
+
+#: ../../standalone.pm:1
+#, c-format
msgid ""
-"Enter a user\n"
-"%s"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
msgstr ""
-"Âúâćäćòć ïîòđćáèòćë\n"
-"%s"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Add user"
-msgstr "Äîáàâè ïîòđćáèòćë"
+msgid "Tape"
+msgstr "Ëćíòà"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This user name has already been added"
-msgstr "Òîâà ïîòđćáèòćëńêî èìć âćść ć äîáàâćíî"
+msgid "Scanning network..."
+msgstr "Ńòàđòèđàíć ìđćæàòà...."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The user name is too long"
-msgstr "Òîâà èìć ć òâúđäć äúëăî"
+msgid ""
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgid "Malaysia"
+msgstr "Ìàëàéçèÿ"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Swiss (French layout)"
+msgstr "Űâćéöàđńêà (ôđćíńêè íàđćäáà)"
+
+#: ../../raid.pm:1
+#, c-format
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "mkraid ïđîïàäíà (ìîæć áè raidtools ëèïńâàò ?)"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Webcam"
msgstr ""
-"Ïîòđćáèòćëńêîòî èìć ìîæć äà âêëțśâà ńàìî ìàëêè áóêâè, íîìćđà, `-' è `_'"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "size of the (second level) cpu cache"
+msgstr "Đàçìćđ íà âòîđèśćí êćű íà cpu"
+
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Please give a user name"
-msgstr "Ìîëÿ, çàäàéòć ïîòđćáèòćëńêî èìć"
+msgid "Soundcard"
+msgstr "Çâóêîâà êàđòà"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This password is too simple"
-msgstr "Òàçè ïàđîëà ć ïđćêàëćíî ïđîńòà"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
+msgstr ""
+"Çà äà èçïćśàòàòć ôàéë îò êîìàíäíèÿ đćä (òćđìèíàëćí ïđîçîđćö) èçïîëçâàéòć "
+"êîìàíäàòà \"%s <file>\".\n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please try again"
-msgstr "Ìîëÿ, îïèòàéòć îòíîâî"
+msgid "Level %s\n"
+msgstr "Íèâî %s\n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The passwords do not match"
-msgstr "Ïàđîëèòć íć ńúâïàäàò"
+msgid "Luxembourg"
+msgstr "Ëțêńćìáóđă"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "(already added %s)"
-msgstr "(âćść ïđèáàâèő %s)"
+msgid ""
+"\n"
+" DrakBackup Daemon Report\n"
+"\n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to compilation tools"
-msgstr "äîńòúï äî èíńòđóìćíòè çà êîìïèëàöèÿ"
+msgid "Iran"
+msgstr "Èđàí"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "access to network tools"
-msgstr "äîńòúï äî ìđćæîâè èíńòđóìćíòè"
+msgid "Bus"
+msgstr "Űèíà"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to administrative files"
-msgstr "äîńòúï äî ôàéëîâć çà àäìèíèńòđèđàíć"
+msgid "Iraq"
+msgstr "Èđàê"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "allow \"su\""
-msgstr "ïîçâîëÿâà \"su\""
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr "Âúçìîæćí êîíôèêò ń àäđćńèòć â LAN ń íàńòđîéêàòà íà %s!\n"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "access to rpm tools"
-msgstr "äîńòúï äî rpm èíńòđóìćíòè"
+msgid "Configuring..."
+msgstr "Íàńòđîéêà ..."
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "access to X programs"
-msgstr "äîńòúï äî X ïđîăđàìè"
+msgid "The setup has already been done, and it's currently enabled."
+msgstr "Óńòàíîâêàòà âćść ć íàïđàâćíà è â ìîìćíòà ć âêëțśćíà."
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
msgstr ""
-"Òîâà ńà đàçëèśíèòć çàïèńè.\n"
-"Ìîæćòć äà äîáàâèòć îùć èëè äà ïđîìćíèòć ńúùćńòâóâàùèòć."
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Other OS (windows...)"
-msgstr "Äđóăà ÎŃ (Windows...)"
+msgid "Password (again)"
+msgstr "Ïàđîëà (îòíîâî)"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Äđóăà ÎŃ (MacOS...)"
+msgid "Search installed fonts"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Äđóăà ÎŃ (SunOS...)"
+msgid "Venezuela"
+msgstr "Âćíćöóćëà"
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Linux"
-msgstr "Linux"
+msgid "IP address"
+msgstr "IP àäđćń"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Êàêúâ òèï èíôîđìàöèÿ èńêàòć äà ïđèáàâèòć"
+msgid "Choose the sizes"
+msgstr "Èçáćđćòć ăîëćìèíèòć"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This label is already used"
-msgstr "Òîçè ćòèêćò âćść ńć èçïîëçâà"
+msgid ""
+"List of data corrupted:\n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "You must specify a root partition"
-msgstr "Òđÿáâà äà çàäàäćòć êîđćíîâèÿò äÿë"
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
+msgstr ""
+"Âàűèÿò ìîäćì íć ńć ïîääúđæà îò ńèńòćìàòà.\n"
+"Ïîăëćäíćòć â http://www.linmodems.org"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You must specify a kernel image"
-msgstr "Òđÿáâà äà çàäàäćòć îáàçà íà ÿäđîòî"
+msgid "Choose another partition"
+msgstr "Èçáćđćòć äđóă äÿë"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Empty label not allowed"
-msgstr "Ïđàçćí ćòèêćò íć ć đàçđćűćí"
+msgid "Current user"
+msgstr "Òćêóù ïîòđćáèòćë"
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Default"
-msgstr "Ïî ïîäđàçáèđàíć"
+msgid "Username"
+msgstr "Ïîòđćáèòćëńêî èìć"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "NoVideo"
-msgstr "Áćç ăđàôèêà"
+msgid "Left \"Windows\" key"
+msgstr "Ëÿâ \"Windows\" êëàâèű"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Initrd-size"
-msgstr "Initrd-ăîëćìèíà"
+msgid "dhcpd Server Configuration"
+msgstr "Êîíôèăóđèđàíć íà dhcpd ńúđâúđ"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Append"
-msgstr "Äîïúëâàíć"
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Label"
-msgstr "Ćòèêćò"
+msgid "Guyana"
+msgstr "Ăèÿíà"
-#: ../../any.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Unsafe"
-msgstr "Îïàńćí"
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr " íà Novell ńúđâúđ \"%s\", ïđèíòćđ \"%s\""
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Table"
-msgstr "Òàáëèöà"
+msgid "Remove a module"
+msgstr "Ïđćìàőíè ìîäóëà"
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Root"
-msgstr "Ăëàâćí"
+msgid "Password"
+msgstr "Ïàđîëà"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Read-write"
-msgstr "Śćòćíć-çàïèń"
+msgid ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid "Advanced Configuration"
+msgstr "Äîïúëíèòćëíà êîíôèăóđàöèÿ"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Video mode"
-msgstr "Âèäćî đćæèì"
+msgid "Scanning on your HP multi-function device"
+msgstr "Ńêàíèđà íà âàűćòî HP ìíîăîôóíêöèîíàëíî óńòđîéńòâî"
#: ../../any.pm:1
#, c-format
-msgid "Image"
-msgstr "Îáđàç"
+msgid "Root"
+msgstr "Ăëàâćí"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Default OS?"
-msgstr "ÎŃ ïî ïîäđàçáèđàíć ?"
+msgid "Choose an existing RAID to add to"
+msgstr "Èçáćđćòć ńúùćńòâóâàù RAID çà ïđèáàâÿíć"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Enable OF Boot?"
-msgstr "Ńòàđòèđàíć îò OF ?"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "Òóđńêà (ìîäćđćí \"Q\" ìîäćë)"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Enable CD Boot?"
-msgstr "Ńòàđòèđàíć îò CD ?"
+msgid "Lilo message not found"
+msgstr "Lilo ńúîáùćíèć íć ć íàìćđćíî"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Èçśàêâàíć çà ńòàđòèđàíć íà ÿäđîòî"
+msgid ""
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
+msgstr ""
+"Àâòîìàòèśíî đćăćíćđèđàíć íà header-èòć íà àäđîòî, â /boot çà\n"
+"/usr/include/linux/{autoconf,version}.h"
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Open Firmware Delay"
-msgstr "Èçśàêâàíć íà Open Firmware"
+msgid "if needed"
+msgstr "àêî ć íóæíî"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Boot device"
-msgstr "Ńòàđòèđàùî óńòđîéńòâî"
+msgid "Restore Failed..."
+msgstr "Âúçńòàíîâÿâàíćòî ïđîïàäíà..."
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Init Message"
-msgstr "Ńòàđòîâî ńúîáùćíèć"
+msgid "/Autodetect _jazz drives"
+msgstr "/Àâòîìàòèśíî îòêđèâà _jazz óńòđîéńòâà"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bootloader to use"
-msgstr "Èçïîëçâàíà çàđćæäàùàòà ïđîăđàìà"
+msgid ""
+"Description:\n"
+"\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
+"\n"
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
+"\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
+"\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
+"\n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "Bootloader main options"
-msgstr "Îïöèè íà çàđćæäàùàòà ïđîăđàìà"
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
+msgstr ""
+"Âúâćäćòíèć\n"
+"\n"
+"Îïćđàöèîííàòà ńèńòćìà è đàçëèśíèòć êîìïîíćíòè äîńòúïíè â Mandrake Linux "
+"äèńòđèáóöèÿòà ïî-äîëó ùć ńć\n"
+"íàđèśàò \"Ńîôòóćđćí Ïđîäóêòè\". Ńîôòóćđíèòć Ïđîäóêòè âêëțśâàò, íî íć ńć "
+"îăđàíèśàâàò ńàìî äî, íàáîđà\n"
+"ïđîăđàìè, ìćòîäè, ïđàâèëà è äîêóìćíòàöèÿ îòíàńÿùà ńć äî îïćđàöèîííàòà "
+"ńèńòćìà è đàçëèśíèòć\n"
+"êîìïîíćíòè íà Mandrake Linux äèńòđèáóöèÿòà.\n"
+"\n"
+"\n"
+"1. Ëèöćíçèîíćí äîăîâîđ\n"
+"\n"
+"Ìîëÿ, ïđîśćòćòć âíèìàòćëíî òîçè äîêóìćíò. Òîçè äîêóìćíò ć ëèöćíçèîíćí "
+"äîăîâîđ ìćæäó âàń è\n"
+"MandrakeSoft S.A., êîéòî ńć îòíàńÿ äî Ńîôòóćđíèÿ Ïđîäóêò. Śđćç "
+"èíńòàëèđàíćòî, êîïèđàíćòî\n"
+"èëè èçïîëçâàíćòî íà Ńîôòóćđíèÿ Ïđîäóêò ïî êàêúâòî è äà ć íàśèí âèć èçđèśíî "
+"ïđèćìàòć è\n"
+"íàïúëíî ńć ńúăëàńÿâàòć äà ńïàçâàòć ńđîêîâćòć è óńëîâèÿòà íà òîçè Ëèöćíç.\n"
+"Àêî íć ńć ńúăëàńÿâàòć ń íÿêîÿ śàńò íà Ëèöćíçà, íÿìàòć ïđàâî äà èíńòàëèđàòć, "
+"êîïèđàòć èëè\n"
+"èçïîëçâàòć Ńîôòóćđíèÿ Ïđîäóêò. Îïèòèòć äà ńć èíńòàëèđà, êîïèđà èëè èçïîëçâà "
+"Ńîôòóćđíèÿ Ïđîäóêò\n"
+"íćńúîáđàçíî ńúń ńđîêîâćòć è óńëîâèÿòà íà òîçè Ëèöćíç ńć çàáđàíÿâàò è òàêèâà "
+"ïđćêđàòÿâàò ïđàâàòà\n"
+"âè ïî òîçè Ëèöćíç. Ïđè ïđćêđàòÿâàíć íà Ëèöćíçà, òđÿáâà íćçàáàâíî äà "
+"óíèæòîæèòć âńèśêè\n"
+"êîïèÿ íà Ńîôòóćđíèÿ ëèöćíç.\n"
+"\n"
+"\n"
+"2. Îăđàíèśćíà ăàđàíöèÿ\n"
+"\n"
+"Ńîôòóćđíèòć Ïđîäóêòè è ïđèëîæćíàòà äîêóìćíòàöèÿ ńć ïđćäîńòàâÿòà \"òàêèâà "
+"êàêâèòî ńà\", áćç ăàđàíöèÿ,\n"
+"â đàìêèòć íà đàçđćűćíîòî îò çàêîíà.\n"
+"MandrakeSoft S.A., ïđè íèêàêâè îáńòîÿòćëńòâà è â đàìêèòć íà çàêîíà, íć ć "
+"îòăîâîđíà çà êàêâèòî äà e\n"
+"óìèűëćíè, ńëóśàéíè, ïđćêè èëè êîńòâćíè ùćòè (âêëțśèòćëíî çàăóáà íà äàííè çà "
+"đàáîòà, ïđćêđàòÿâàíć íà,\n"
+"đàáîòà, ôèíàíńîâè çàăóáè, çàêîííè äàíúöè è íàêàçàíèÿ â đćçóëòàò íà ńúäćáíî "
+"đćűćíèć èëè êàêâàòî è äà ć\n"
+"äđóăà ïđîèçëèçàùè îò òîâà çàăóáè) ïđîèçòèśàùè îò óïîòđćáàòà èëè îò "
+"íćâúçìîæíîńòòà äà ńć óïîòđćáè\n"
+"Ńîôòóćđíèÿ Ïđîäóêò, äàæć àêî MandrakeSoft S.A. äà ć èçâćńòèëà çà "
+"âúçìîæíîńòòà èëè ńëóśâàíćòî íà òàêàâà çàăóáà.\n"
+"\n"
+"ÎĂĐÀÍÈŚĆÍÀ ÎÒĂÎÂÎĐÍÎŃÒ ŃÂÚĐÇÀÍÀ Ń ÏĐÈÒĆÆÀÂÀÍĆÒÎ ÈËÈ ÈÇÏÎËÇÂÀÍĆÒÎ ÍÀ ÇÀÁĐÀÍĆÍ "
+"ŃÎÔÒÓĆĐ Â ÍßÊÎÈ ŃÒĐÀÍÈ\n"
+"\n"
+"Â đàìêèòć íà çàêîíà, MandrakeSoft S.A. è íćéíèòć äèńòđèáóòîđè íÿìà ïđè "
+"íèêàêâè óńëîâèÿ äà áúäàò\n"
+"îòăîâîđíè çà êàêâèòî è äà áèëî óìèűëćíè, ńëóśàéíè, ïđćêè èëè êîńâćíè ùćòè "
+"(âêëțśèòćëíî çàăóáà íà äàííè\n"
+"çà đàáîòà, ïđćêđàòÿâàíć íà, đàáîòà, ôèíàíńîâè çàăóáè, çàêîííè äàíúöè è "
+"íàêàçàíèÿ â đćçóëòàò íà\n"
+"ńúäćáíî đćűćíèć èëè êàêâàòî è äà ć äđóăà ïđîèçëèçàùè îò òîâà çàăóáè) "
+"ïđîèçòèśàùè îò ïđèòćæàâàíćòî\n"
+"è óïîòđćáàòà íà ńîôòóćđíè êîìïîíćíòè è îò èçòćăëÿíćòî íà ńîôòóćđíè "
+"êîìïîíćíòè îò ńàéòîâćòć íà Mandrake Linux,\n"
+"êîèòî ńà çàáđàíćíè â íÿêîè ńòđàíè îò ìćńòíîòî çàêîíîäàòćëńòâî.\n"
+"Òàçè îăđàíèśćíà îòăîâîđíîńò ńć îòíàńÿ äî, íî íć ńàìî çà, ìîùíèòć "
+"êđèïòîăđàôńêè êîìïîíćíòè âêëțśćíè\n"
+"â Ńîôòóćđíèÿ Ïđîäóêò.\n"
+"\n"
+"\n"
+"3. GPL Ëèöćíçà è ïđèäđóæàâàùè ëèöćíçè\n"
+"\n"
+"Ńîôòóćđíèÿò Ïđîäóêò ńć ńúńòîè îò êîìïîíćíòè ńúçäàäćíè îò đàçëèśíè őîđà èëè "
+"îđăàíèçàöèè. Ïîâćśćòî îò\n"
+"òćçè êîìïîíćíòè ńć óïđàâëÿâàò îò ńđîêîâćòć è óńëîâèÿòà íà GNU Îáùèÿ Ïóáëèśćí "
+"Ëèöćíç, îòòóê íàòàòúê íàđèśàí\n"
+"\"GPL\", èëè ïîäîáíè íćìó ëèöćíçè. Ïîâćśćòî îò òćçè ëèöćíçè âè ïîçâîëÿâàò äà "
+"èçïîëçâàòć, êîïèđàòć, èëè\n"
+"đćäèńòđèáóòèđàòć êîìïîíćíòèòć, êîèòî òć ïîêđèâàò. Ìîëÿ, ïđîśćòćòć âíèìàòćëíî "
+"ńđîêîâćòć è óńëîâèÿòà íà\n"
+"ëèöćíçèîííèÿ äîăîâîđ íà âńćêè êîìïîíćíò ïđćäè äà ăî èçïîëçâàòć. Âńÿêàêâè "
+"âúïđîńè îòíîńíî ëèöćíçà\n"
+"íà êîìïîíćíòèòć áè òđÿáâàëî äà áúäàò íàńîśćíè êúì ńúîòâćòíèÿ èì àâòîđ, à íć "
+"êúì MandrakeSoft.\n"
+"Ïđîăđàìèòć đàçđàáîòćíè îò MandrakeSoft S.A. ńć óïđàâëÿâàò îò GPL Ëèöćíçà. "
+"Äîêóìćíòàöèÿòà íàïèńàíà\n"
+"îò MandrakeSoft S.A. ńć óïđàâëÿâà îò ńïćöèàëćí ëèöćíç. Ìîëÿ, ïîăëćäíćòć "
+"äîêóìćíòàöèÿòà çà\n"
+"ïîâćść èíôîđìàöèÿ.\n"
+"\n"
+"\n"
+"4. Ïđàâà çà Èíòćëćêòóàëíà Ńîáńòâćíîńò\n"
+"\n"
+"Âńèśêè ïđàâà êúì êîìïîíćíòèòć íà Ńîôòóćđíèÿ Ïđîäóêò ïđèíàäëćæàò íà "
+"ńúîòâćòíèòć èì àâòîđè è ńà\n"
+"çàùèòćíè îò çàêîíèòć çà èíòćëćêòóàëíàòà ńîáńòâćíîńò è çà êîïèđàíć ïđèëàăàíè "
+"çà ńîôòóćđíèòć ïđîăđàìè.\n"
+"MandrakeSoft S.A. çàïàçâà ïđàâîòî ńè äà ìîäèôèöèđà è ïđèăîäÿâà Ńîôòóćđíèÿ "
+"Ïđîäóêò, êàòî öÿëî èëè íà\n"
+"śàńòè, ïî âńÿêàêúâ íàśèì î ń âńÿêàêâè öćëè.\n"
+"\"Mandrake\", \"Mandrake Linux\" è ńâúđçàíèòć ëîăîòà ńà çàïàçćíà ìàđêà íà "
+"MandrakeSoft S.A.\n"
+"\n"
+"\n"
+"5. Óïđàâëÿâàùè Çàêîíè\n"
+"\n"
+"Àêî íÿêîÿ śàńò îò òîçè äîăîâîđ ńć âîäè çàáđàíćíà, íćëćăàëíà èëè íćïđèëîæèìà "
+"ńïîđćä đćűćíèć íà ńúä,\n"
+"òàçè śàńò ńć èçêëțśâà îò äîăîâîđà. Âèć îńòàâàòć îăđàíèśćíè îò îńòàíàëèòć "
+"ïđèëîæèìè ńćêöèè íà äîăîâîđà.\n"
+"Ńđîêîâćòć è óńëîâèÿòà íà òîçè Ëèöćíç ńć óïđàâëÿâàò îò Çàêîíèòć íà Ôđàíöèÿ.\n"
+"Âńèśêè ńïîđîâć ïî óńëîâèÿòà íà òîçè ëèöćç áè áèëî äîáđć äà ńć îòíćńàò äî "
+"ńúäà. Êàòî êđàéíà ìÿđêà,\n"
+"ńïîđîâćòć ùć áúäàò îòíàńÿíè äî ïîäőîäÿùèÿ ïđàâíè ńúäèëèùà íà Ïàđèæ - "
+"Ôđàíöèÿ.\n"
+"Çà âńÿêàêâè âúïđîńè ïî òîçè äîêóìćíò, ìîëÿ, ńâúđæćòć ńć ń MandrakeSoft S.A.\n"
+"\n"
+"ÇÀÁĆËĆÆÊÀ: Òîâà ć áúëăàđńêè ïđèáëèçèòćëćí ïđćâîä íà äîêóìćíòà, êîćòî "
+"îçíàśàâà, ść òîé\n"
+"âćđîÿòíî íć ć äîńòàòúśíî òîśćí. Êàòî ïî-äîńòîâćđćí èçòîśíèê ïîëçâàéòć "
+"íćăîâèÿ îđèăèíàë íà\n"
+"àíăëèéńêè.\n"
-#: ../../any.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Îïöèÿòà ``Îăđàíèśè îïöèèòć îò êîìàíäíèÿ đćä'' ć áćçïîëćçíà áćç ïàđîëà"
+"the progress bar x coordinate\n"
+"of its upper left corner"
+msgstr ""
+"ëćíòàòà çà ïđîăđćń x êîîđäèíàòè\n"
+"îò ăîđíèÿò ëÿâ úăúë"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Give the ram size in MB"
-msgstr "Äàâà đàçìćđà RAM-ïàìćò â Mb"
+msgid "Current interface configuration"
+msgstr "Êîíôèăóđàöèÿ íà òćêóùèÿò èíòćđôćéń"
-#: ../../any.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Enable multiple profiles"
-msgstr "Âêëțśâà ìíîăî ïđîôèëè"
+msgid "LPD - Line Printer Daemon"
+msgstr "LPD - Ëèíććí Ïđèíòćđćí Äćìîí"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Òîśćí đàçìćđ íà RAM-ïàìćòòà, àêî ć íćîáőîäèìî (íàìćđćíè %d MB)"
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
+msgstr ""
+"\n"
+"Àêî èìàòć ISA êàđòà, ńòîéíîńòèòć íà ńëćäâàùèÿ ćêđàí òđÿáâà äà ńà âćđíè.\n"
+"\n"
+"Àêî èìàòć PCMCIA êàđòà, ùć òđÿáâà äà çíàćòć IRC è IO íà êàđòàòà ńè.\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Ïîśèńòâàíć íà /tmp ïđè âńÿêî çàđćæäàíć"
+msgid "Do not print any test page"
+msgstr "Íć ïćśàòè íèêàêâà òćńòîâà ńòđàíèöà"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Create a bootdisk"
-msgstr "Ńúçäàâàíć íà boot-äèńêćòà"
+msgid "Gurmukhi"
+msgstr "Ăóđìóêśè"
#: ../../any.pm:1
#, c-format
-msgid "restrict"
-msgstr "îăđàíèśè"
+msgid "Force No APIC"
+msgstr "Áćç APIC"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restrict command line options"
-msgstr "Îăđàíèśè îïöèèòć, çàäàâàíè îò êîìàíäíèÿ đćä"
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr "Ïàđîëàòà ć ïđćêàëćíî ïđîńòà (òđÿáâà äà áúäć äúëăà ïîíć %d ńèìâîëà)"
-#: ../../any.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Force No APIC"
-msgstr ""
+msgid "[keyboard]"
+msgstr "[êëàâèàòóđà]"
-#: ../../any.pm:1
+#: ../../network/network.pm:1
+#, c-format
+msgid "FTP proxy"
+msgstr "FTP proxy"
+
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Enable ACPI"
-msgstr "Ńòàđòèđàíć îò CD ?"
+msgid "Install List"
+msgstr "Èíńòàëèđàíć íà ńèńòćìàòà"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Delay before booting default image"
-msgstr "Çàáàâÿíć ïđćäè ńòàđòèđàíćòî íà ïîäđàçáèđàùèÿò îáđàç"
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr ""
+"Ïđîìÿíà\n"
+"ïúòÿ íà âúçńòàíîâÿâàíć"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "compact"
-msgstr "êîìïàêòćí"
+msgid "Show only for the selected day"
+msgstr "Ïîêàçâà ńàìî çà èçáđàíèÿò äćí"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Compact"
-msgstr "Êîìïàêòćí"
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
+"\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
+"\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Bootloader installation"
-msgstr "Èíńòàëàöèÿ íà Bootloader"
+msgid "512 kB"
+msgstr "512 ÊÁ"
-#: ../../any.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "First sector of boot partition"
-msgstr "Ïúđâè ńćêòîđ îò ńòàđòèđàùèÿ ńć äÿë"
+msgid "Logs"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Ïúđâèÿò ńćêòîđ îò äđàéâà (MBR)"
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Êúäć èńêàòć äà èíńòàëèđàòć bootloader-à?"
+msgid "<control>N"
+msgstr "<control>N"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "LILO/grub Installation"
-msgstr "LILO/grub èíńòàëàöèÿ"
+msgid "What kind of card do you have?"
+msgstr "Êàêúâ òèï êàđòà èìàòć ?"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "SILO Installation"
-msgstr "SILO èíńòàëàöèÿ"
+msgid "<control>O"
+msgstr "<control>O"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
-msgid "Skip"
-msgstr "Ïđćńêàśà"
+msgid "Security"
+msgstr "Ńèăóđíîńò"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "On Floppy"
-msgstr "Çàïàçâà íà äèńêćòà"
+msgid ""
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#, c-format
+msgid "<control>Q"
+msgstr "<control>Q"
+
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "First sector of the root partition"
-msgstr "Ïúđâè ńćêòîđ îò ńòàđòèđàùèÿ ńć äÿë"
+msgid "Unknown"
+msgstr "Íćèçâćńòćí ìîäćë"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr ""
+
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#, c-format
+msgid "Network Configuration"
+msgstr "Íàńòđîéêà íà ìđćæàòà"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>S"
+msgstr "<control>S"
+
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
msgstr ""
+"Ïđîòîêîë çà îńòàíàëèÿ ńâÿò\n"
+" áćç D-Êàíàë (íàćòà ëèíèÿ)"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Creating bootdisk..."
-msgstr "Ńúçäàâàíć íà ńòàđòèđàùà äèńêćòà..."
+msgid "Option %s must be a number!"
+msgstr "Íàńòđîéêàòà %s òđÿáâà äà ć śèńëî !"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Ńëîæćòć äèńêćòà â óńòđîéńòâî %s"
+msgid "Notice"
+msgstr "Áćëćæêà"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Èçáćđćòć ôëîïè óńòđîéńòâî, êúäćòî äà íàïđàâèòć ńòàđòèđàùà äèńêćòà"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+" Àêòèâèđà/Çàáđàíÿâà ćæćäíćâíà ïđîâćđêà çà çàùèòà"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Second floppy drive"
-msgstr "Âòîđî ôëîïè óńòđîéńòâî"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "First floppy drive"
-msgstr "Ïúđâî ôëîïè óńòđîéńòâî"
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr "Âèć íć ńòć êîíôèăóđèđàëè X. Ńèăóđíè ëè ńòć, ść èńêàòć òîâà?"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "Ńúæàëÿâàì íÿìà ôëîïè"
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
+"Êîíôèăóđàöèÿòà íà ïđèíòćđà ùć đàáîòè íàűúëíî àâòîìàòèśíî. Àêî âàűèÿò ïđèíòćđ "
+"íć ć áèë êîđćêòíî îòêđèò èëè âèć ïđćäïîśèòàòć íà íàńòđîèòć ïđèíòćđà, "
+"âêëțśćòć íà \"Đúśíà êîíôèăóđàöèÿ\"."
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "What type of partitioning?"
+msgstr "Êàêúâ òèï đàçäćëÿíć íà äÿëîâć ?"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
+"file list sent by FTP: %s\n"
+" "
msgstr ""
-"Êëèćíòńêè bootdisk ć íćîáőîäèì çà ńòàđòèđàíć â Linux ńèńòćìàòà âè "
-"íćçàâèńèìî\n"
-"îò îáèêíîâćíàòà çàđćæäàùà ïđîăđàìà. Òîâà ć ïîëćçíî, àêî íć èńêàòć äà "
-"èíńòàëèđàòć\n"
-"LILO (èëè GRUB) íà ńèńòćìàòà ńè èëè àêî íÿêîÿ äđóăà îïćđàöèîííà ńèńòćìà "
-"ìàőíć LILO èëè LILO íć\n"
-"đàáîòè ń őàđäóćđíàòà âè íàńòđîéêà. Bootdisk-úò ìîæć äà áúäć èçïîëçâàí ńúń\n"
-"ńïàńèòćëíàòà äèńêćòà íà Mandrake, óëćńíÿâàùà âúçńòàíîâÿâàíćòî ïđè đćäêè\n"
-"ńëóśàè íà ńđèâ. Èńêàòć ëè äà ńúçäàì bootdisk çà ńèńòćìàòà âè ?\n"
-"%s"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Interface"
+msgstr "Èíòćđôćéń"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
+"Options Description:\n"
"\n"
+" - Backup System Files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
+" - Backup User Files: \n"
"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
"\n"
-"(ÏĐĆÄÓÏĐĆÆÄĆÍÈĆ! Âèć èçïîëçâàòć XFS çà âàűàòà êîđćíîâà ôàéëîâà ńèńòćìà,\n"
-"ńúçäàâàíćòî íà bootdisk âúđőó 1.44 Ìá ôëîïè íÿìà äà ć óńïćűíî,\n"
-"ïîíćæć XFS ńć íóæäàć îò ìíîăî ïîâćść ìÿńòî)."
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane. To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
msgstr ""
-"Êëèćíòńêÿò bootdisk ć íćîáőîäèì çà ńòàđòèđàíć â Linux ńèńòćìàòà âè "
-"íćçàâèńèìî\n"
-"îò îáèêíîâćíèÿ bootloader. Òîâà ć ïîëćçíî, àêî íć èńêàòć äà èíńòàëèđàòć\n"
-"SILO íà ńèńòćìàòà ńè, àêî íÿêîÿ äđóăà îïćđàöèîííà ńèńòćìà ìàőíć SILO\n"
-"èëè àêî SILO íć đàáîòè ń őàđäóćđíàòà âè íàńòđîéêà. Êëèćíòńêèÿò bootdisk\n"
-"ìîæć äà áúäć èçïîëçâàí ńúń\n"
-"ńïàńèòćëíèÿò îáđàç íà Mandrake, óëćńíÿâàêè âúçńòàíîâÿâàíćòî ïđè đćäêè\n"
-"ńëóśàè íà ńđèâ.\n"
-"\n"
-"Àêî èńêàòć äà ńúçäàäćòć bootdisk çà âàűàòà ńèńòćìà, ïîńòàâćòć äèńêćòà â\n"
-"ïúđâîòî óńòđîéńòâî è íàòèńíćòć \"Ok\"."
-#: ../../bootloader.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Íć ìîæćòć äà èíńòàëèđàòć bootloader íà äÿëà %s\n"
+msgid "comma separated strings"
+msgstr "íèçîâć đàçäćëćíè ńúń çàïćòàÿ"
-#: ../../bootloader.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "not enough room in /boot"
-msgstr "íÿìà äîńòàòúśíî ìÿńòî çà /boot"
+msgid "These are the machines from which the scanners should be used:"
+msgstr ""
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Ïîäńâćòíàòèÿò çàïèń ùć çàđćäè àâòîìàòèśíî ńëćä %d ńćêóíäè."
+msgid "Messages"
+msgstr "Ńúîáùćíèÿ"
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "êîìàíäèòć ïđćäè ńòàđòèđàíć, èëè 'c' çà êîìàíäćí đćä."
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr "Íćèçâćńòćí|CPH06X (bt878) [ìíîăî ïđîèçâîäèòćëè]"
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Íàòèńíćòć 'enter' çà äà ńòàđòèđàòć èçáđàíàòà ÎŃ, 'e' äà đćäàêòèđàòć"
+msgid "POP and IMAP Server"
+msgstr "POP è IMAP ńúđâúđ"
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr ""
-"Èçïîëçâà êëàâèűèòć %c è %c çà èçáîđ íà òîâà êîé çàïèń äà áúäć ïîäńâćòíàò."
+msgid "Mexico"
+msgstr "Ìćêńèêî"
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Äîáđć äîűëè â GRUB ,çà èçáîđ íà îïćđàöèîííàòà ńèńòćìà!"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model stepping"
+msgstr "Ôîđìàòèđàíć"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Rwanda"
+msgstr "Đóàíäà"
-#: ../../bootloader.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Grub"
-msgstr "Grub"
+msgid "Do you have any %s interfaces?"
+msgstr "Èìàòć ëè íÿêàêúâ %s èíòćđôćéń?"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with text menu"
-msgstr "LILO ń òćêńòîâî ìćíț"
+msgid "Switzerland"
+msgstr "Űâćéöàđèÿ"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO ń ăđàôèśíî ìćíț"
+msgid "Brunei Darussalam"
+msgstr "Áđóíćé"
-#: ../../bootloader.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Remote lpd Printer Options"
+msgstr "Îïöèè íà îòäàëćśćí lpd-ïđèíòćđ"
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
"\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
msgstr ""
-"Äîáđć äîűëè â %s - èçáèđàíć íà îïćđàöèîííà ńèńòćìà!\n"
+"GNU/Linux ć ìíîăîïîòđćáèòćëńêà ńèńòćìà, êîÿòî îçíàśàâà, ść âńćêè ïîòđćáèòćë "
+"ìîæć\n"
+"äà èìà ńâîè ïđćäïîśćòàíèÿ, ôàéëîâć è ò.í.. ìîæćòć äà ïđîśćòćòć Đúêîâîńòâîòî "
+"íà\n"
+"Ïîòđćáèòćëÿ, çà äà íàóśèòć ïîâćść.\n"
+"Çà đàçëèêà îò Root, êîéòî ć àäìèíèńòđàòîđúò, ïîòđćáèòćëèòć, êîèòî ùć "
+"äîáàâèòć òóê\n"
+"íÿìà äà ìîăàò äà ïđîìćíÿò íèùî îńâćí ńîáńòâćíèòć ńè ôàéëîâć è òćőíèòć "
+"íàńòđîéêè.\n"
+"Ùć òđÿáâà äà ńúçäàäćòć ïîíć ćäèí îáèêíîâćí ïîòđćáèòćë çà ńćáć ńè.\n"
+"Ń òîçè àêàóíò ùć òđÿáâà äà âëèçàòć çà đóòèííà äćéíîńò. Âúïđćêè òîâà "
+"ïđàêòèêàòà\n"
+"äà âëèçàòć êàòî root ćæćäíćâíî, ìîæć äà áúäć ìíîăî îïàńíà ! È íàé-"
+"ìàëêàòàăđćűêà\n"
+"ìîæć äà îçíàśàâà, ść ńèńòćìàòà âè íÿìà äà đàáîòè ïîâćść. Àêî íàïđàâèòć íÿêîÿ "
+"ńćđèîçíà\n"
+"ăđćűêà êàòî ïîòđćáèòćë, òîâà ìîæć ńà äà äîâćäć äî çàăóáà íà śàńò îò "
+"èíôîđìàöèÿòà,\n"
+"íî íć è íà öÿëàòà ńèńòćìà.\n"
"\n"
-"Èçáćđćòć îïćđàöèîííàòà ńèńòćìà îò ăîđíèÿò ńïèńúê èëè èçśàêàéòć\n"
-"%d ńćêóíäè çà ïîäđàçáèđàùî ńòàđòèđàíć.\n"
+"Ïúđâî, òđÿáâà äà ńè âúâćäćòć èìćòî. Òîâà íć ć çàäúëæèòćëíî, đàçáèđà ńć, "
+"âńúùíîńò\n"
+"ìîæćòć äà âúâćäćòć êàêâîòî è äà ć. DrakX ńëćä òîâà ùć èçáćđć ïúđâàòà "
+"âúâćäćíà\n"
+"â êóòèéêàòà äóìà è ùć ăî èçêàđà êàòî ïîòđćáèòćëńêî èìć. Òîâà ć èìćòî, ń "
+"êîćòî\n"
+"âńúùíîńò îïđćäćëćíèÿò ïîòđćáèòćë ùć âëèçà â ńèńòćìàòà. Ìîæćòć äà ăî "
+"ïđîìćíèòć.\n"
+"Òđÿáâà äà âúâćäćòć è ïàđîëà òóê. Ïàđîëàòà íà íćïđćâèëćăèđîâàí (îáèêíîâćí) "
+"ïîòđćáèòćë\n"
+"íć ć òîëêîâà ôàòàëíà êàòî òàçè íà Root îò ăëćäíà òîśêà íà ńèăóđíîńòòà, íî "
+"âńć\n"
+"ïàê íÿìà ïđèśèíà äà ÿ ïîäöćíÿâàòà, òúé êàòî đèńêóâàòć ôàéëîâćòć ńè.\n"
"\n"
+"Ńëćä êàòî öúêíćòć íà \"Ïđèćìè ïîòđćáèòćë\", ìîæćòć äà äîáàâèòć êîëêîòî ńè "
+"èńêàòć.\n"
+"Äîáàâćòć ïî ćäèí ïîòđćáèòćë çà âńćêè îò ïđèÿòćëèòć ńè: áàùà ńè, ńćńòđà ńè, "
+"íàïđèìćđ.\n"
+"Êîăàòî ńòć äîáàâèëè âńèśêè ïîòđćáèòćëè, êîèòî èńêàòć, öúêíćòć Ăîòîâî.\n"
+"\n"
+"Öúêíćòć íà áóòîíà \"Íàïđćäíèśàâ\", çà äà ïđîìćíèòć îáâèâêàòà ïî ïîäđàçáèđàíć "
+"íà\n"
+"ïîòđćáèòćëÿ (bash ïî ïîäđàçáèđàíć)."
-#: ../../common.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "consolehelper missing"
-msgstr "ëèïńâà ïîìîù íà êîíçîëà"
+msgid "Configure Internet Access..."
+msgstr "Íàńòđîéêà íà Èíòćđíćò äîńòúïà ..."
-#: ../../common.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "kdesu missing"
-msgstr "ëèïńâà kdesu"
+msgid "Norway"
+msgstr "Íîđâćăèÿ"
-#: ../../common.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Ńíèìêè ùć áúäàò íàëèśíè ńëćä èíńòàëèđàíć â %s"
+msgid "Danish"
+msgstr "Äàòńêà"
-#: ../../common.pm:1
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
+msgstr ""
+"Àâòîìàòèśíî âêëțśâàíć íà numlock êëàâèűà ïîä êîíçîëà è\n"
+"XFree ïđè ńòàđòèòàíć."
+
+#: ../../network/network.pm:1
+#, c-format
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+"Ìîëÿ, âúâćäćòć IP íàńòđîéêèòć çà òàçè ìàűèíà.\n"
+"Âńÿêî óńòđîéńòâî òđÿáâà äà áúäć âúâćäćíî êàòî IP àäđćń\n"
+"ń òîśêîâî-äćńćòèśíî îçíàśćíèć (íàïđèìćđ, 1.2.3.4)."
+
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "Íć ìîăà äà äîáàâÿ ïîâćść äÿëîâć"
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
+msgstr ""
+"Èíńòàëàöèÿòà íà Mandrake Linux ć đàçïîëîæćíà íà íÿêîëêî CDROM-à. DrakX\n"
+"çíàć äàëè èçáđàí ïàêćò íć ńć íàìèđà íà äđóă CDROM èëè ùć èçâàäè òćêóùîòî\n"
+"CD è ùć âè îńòàâè äà âêàđàòć òîâà, îò êîćòî èìà íóæäà."
-#: ../../common.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "%d seconds"
-msgstr "%d ńćêóíäè"
+msgid "Processors"
+msgstr "Ïđîöćńîđè"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "1 minute"
-msgstr "1 ìèíóòà"
+msgid "Bulgaria"
+msgstr "Áúëăàđèÿ"
-#: ../../common.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "%d minutes"
-msgstr "%d ìèíóòè"
+msgid "No NIC selected!"
+msgstr "Íÿìà NIC èçáđàí!"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "TB"
-msgstr "ÒÁ"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr "Ńâàëáàđä è ßí Ìàéćí Îńòđîâè"
-#: ../../common.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "GB"
-msgstr "ĂÁ"
+msgid ""
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
+msgstr ""
+"Ïîÿâè ńć ïđîáëćì ïđè êîíôèăóđàöèÿòà.\n"
+"Ïđîâćđćòć âàűàòà âđúçêà ïđćç net_monitor èëè mcc. Àêî âàűàòà âđúçêà íć "
+"đàáîòè , âèć òđÿáâà äà ïđćêîíôèăóđèđàòć."
-#: ../../common.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "MB"
-msgstr "ÌÁ"
+msgid "partition %s is now known as %s"
+msgstr "äÿë %s ńćăà ć èçâćńòćí êàòî %s"
-#: ../../common.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "KB"
-msgstr "ÊÁ"
+msgid "Backup Other files..."
+msgstr "Đćçćđâíî êîïèć íà äđóăè ôàéëîâć..."
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "United States"
-msgstr "ŃÀÙ"
+msgid "SMB server IP"
+msgstr "IP íà SMB ńúđâúđ:"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Austria"
-msgstr "Àâńòđèÿ"
+msgid "Congo (Kinshasa)"
+msgstr "Êîíăî (Êèíűàńà)"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Italy"
-msgstr "Èòàëèÿ"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "Òàáëèöàòà íà äÿëîâćòć íà óńòđîéńòâî %s ùć áúäć çàïèńàíà âúđőó äèńêà !"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Netherlands"
-msgstr "Őîëàíäèÿ"
+msgid "Installing HPOJ package..."
+msgstr "Èíńòàëèđàíć íà HPOJ ïàêćòè ..."
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Sweden"
-msgstr "Űâćöèÿ"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr ""
+"Êëèćíòńêè bootdisk ć íćîáőîäèì çà ńòàđòèđàíć â Linux ńèńòćìàòà âè "
+"íćçàâèńèìî\n"
+"îò îáèêíîâćíàòà çàđćæäàùà ïđîăđàìà. Òîâà ć ïîëćçíî, àêî íć èńêàòć äà "
+"èíńòàëèđàòć\n"
+"LILO (èëè GRUB) íà ńèńòćìàòà ńè èëè àêî íÿêîÿ äđóăà îïćđàöèîííà ńèńòćìà "
+"ìàőíć LILO èëè LILO íć\n"
+"đàáîòè ń őàđäóćđíàòà âè íàńòđîéêà. Bootdisk-úò ìîæć äà áúäć èçïîëçâàí ńúń\n"
+"ńïàńèòćëíàòà äèńêćòà íà Mandrake, óëćńíÿâàùà âúçńòàíîâÿâàíćòî ïđè đćäêè\n"
+"ńëóśàè íà ńđèâ. Èńêàòć ëè äà ńúçäàì bootdisk çà ńèńòćìàòà âè ?\n"
+"%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Norway"
-msgstr "Íîđâćăèÿ"
+msgid ", USB printer \\#%s"
+msgstr ", USB ïđèíòćđ \\#%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Greece"
-msgstr "Ăúđöèÿ"
+msgid "Latvian"
+msgstr "Ëàòâèéńêà"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Germany"
-msgstr "Ăćđìàíèÿ"
+msgid "monthly"
+msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Czech Republic"
-msgstr "Śćűêà Đćïóáëèêà"
+msgid "Module name"
+msgstr "Èìć íà ìîäóë"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Belgium"
-msgstr "Áćëăèÿ"
+msgid "Start at boot"
+msgstr "Èçïúëíćíèć ïđè ńòàđòèđàíć"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "France"
-msgstr "Ôđàíöèÿ"
+msgid "Use Incremental Backups"
+msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Costa Rica"
-msgstr "Êîńòà Đèêà"
+msgid "First sector of drive (MBR)"
+msgstr "Ïúđâèÿò ńćêòîđ îò äđàéâà (MBR)"
-#: ../../fsedit.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Ăđćűêà ïđè îòâàđÿíć íà %s çà çàïèń: %s"
+msgid "Joystick"
+msgstr "Äæîéńòèê"
-#: ../../fsedit.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Nothing to do"
-msgstr "Íÿìà íèùî çà ïđàâćíć"
+msgid "El Salvador"
+msgstr "Ćë Ńàëâàäîđ"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Íÿìà äîńòàòúśíî ìÿńòî çà àâòîìàòèśíî đàçïđćäćëÿíć"
+msgid "Use Unicode by default"
+msgstr "Èçïîëçâà óíèêîä ïî ïîäđàçáèđàíć"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
+msgid "the module of the GNU/Linux kernel that handles the device"
msgstr ""
-"Âèć íć ìîæć äà èçïîëçâàòć êđèïòèđàíà ôàéëîâà ńèńòćìà çà òîśêà íà ìîíòèđàíć %s"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Trying to rescue partition table"
+msgstr "Îïèòâàì ńć äà ńïàńÿ òàáëèöàòà íà äÿëîâćòć"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s must be an integer number!"
+msgstr "Íàńòđîéêàòà %s òđÿáâà äà ć öÿëî śèńëî !"
+
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
+"Entries you'll have to fill:\n"
+"%s"
msgstr ""
-"Íóæäàćòć ńć îò èńòèíńêà ôàéëîâà ńèńòćìà (ext2, reiserfs,xfs, èëè jfs) çà "
-"òàçè òîśêà íà ìîíòèđàíć\n"
+"Çàïèńèòć êîèòî âèć ùć òđÿáâà äà çàïúëíèòć:\n"
+"%s"
-#: ../../fsedit.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Òàçè äèđćêòîđèÿ òđÿáâà äà îńòàíć â đàìêèòć íà root ôàéëîâàòà ńèńòćìà."
+msgid "Unable to start live upgrade !!!\n"
+msgstr "Íć ìîăà äà ïóńíà îáíîâÿâàíćòî !!!\n"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Íć ìîæćòć äà èçïîëçâàòć LVM òèï çà ìÿńòî íà ìîíòèđàíć %s"
+msgid "Name: "
+msgstr "Èìć: "
-#: ../../fsedit.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"Ìàđêèđàëè ńòć ńîôòóćđćí RAID äÿë êàòî root (/).\n"
-"Íÿìà çàđćæäàùà ïđîăđàìà, êîÿòî äà ìîæć äà ńć ńïđàâè ń íćăî áćç /boot äÿë.\n"
-"Òàêà ść äîáàâćòć /boot äÿë"
+msgid "16 million colors (24 bits)"
+msgstr "16 ìèëèîíà öâÿòà (24 áèòà)"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Âćść èìà äÿë ìîíòèđàí íà òîâà ìÿńòî %s\n"
+msgid "Allow all users"
+msgstr "Ïîçâîëÿâà íà ïîòđćáèòćëè"
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "Èìćòî íà ïđèíòćđà òđÿáâà äà ńúäúđæà ńàìî áóêâè, śèńëà è ïîäśćđòàâêà"
+#: ../../share/advertising/08-store.pl:1
+#, c-format
+msgid "The official MandrakeSoft Store"
+msgstr "Îôèöèàëíèÿò èçòîśíèê íà MandrakeSoft "
-#: ../../fsedit.pm:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Òîśêèòć íà ìîíòèđàíć òđÿáâà äà çàïîśâàò ń /"
+msgid "Resizing"
+msgstr "Ïđîìÿíà íà ăîëćìèíàòà"
-#: ../../fsedit.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Íć ìîæćòć äà èíńòàëèđàíć ReiserFS íà äÿë ïî-ìàëúê îò 32 ÌÁ"
+msgid "Cable connection"
+msgstr "Êàáćëíà âđúçêà"
-#: ../../fsedit.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Íć ìîæćòć äà èçïîëçâàòć JFS çà äÿë ïî-ìàëúê îò 16 ÌÁ"
+msgid "User"
+msgstr "Ïîòđćáèòćë"
#: ../../fsedit.pm:1
#, c-format
@@ -1031,981 +1706,266 @@ msgstr ""
"\n"
"Ńúăëàńíè ëè ńòć äà çàăóáèòć âńèśêè äÿëîâć?\n"
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Error"
-msgstr "Ăđćűêà"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr ""
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "server"
-msgstr "ńúđâúđ"
+msgid "Printer on parallel port \\#%s"
+msgstr "Ïđèìćđ íà ïàđàëćëćí ïîđò \\#%s"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "with /usr"
-msgstr "ń /usr"
+msgid "Name"
+msgstr "Èìć"
-#: ../../fsedit.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "simple"
-msgstr "ïđîńò"
+msgid "mkraid failed"
+msgstr "mkraid ïđîïàäíà"
-#: ../../fs.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Enabling swap partition %s"
-msgstr "Đàçđćűàâà swap äÿë %s"
+msgid "Button 3 Emulation"
+msgstr "Èìèòàöèÿ íà 3 áóòîíà"
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "error unmounting %s: %s"
-msgstr "ăđćűêà ïđè äćìîíòèđàíć íà %s: %s"
+msgid "Sending files..."
+msgstr "Èçïđàùàì ôàéëîâć..."
-#: ../../fs.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "ìîíòèđàíćòî íà äÿë %s â äèđćêòîđèÿ %s ïđîïàäíà"
+msgid "Israeli (Phonetic)"
+msgstr "Èçđàćëńêà (ôîíćòèśíà)"
-#: ../../fs.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mounting partition %s"
-msgstr "Ôîđìàòèđà äÿë %s"
+msgid "access to rpm tools"
+msgstr "äîńòúï äî rpm èíńòđóìćíòè"
-#: ../../fs.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Checking %s"
-msgstr "Ïđîâćđêà íà %s"
+msgid "edit"
+msgstr "đćäàêòèđà"
-#: ../../fs.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Formatting partition %s"
-msgstr "Ôîđìàòèđàíć íà äÿë %s"
+msgid "You must choose/enter a printer/device!"
+msgstr "Òđÿáâà äà âúâćäćòć/èçáćđćòć ïđèíòćđ/óńòđîéńòâî!"
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Ńúçäàâàíć è ôîđìàòèđàíć íà ôàéë %s"
+msgid "Permission problem accessing CD."
+msgstr ""
-#: ../../fs.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "íć çíàì êàê äà ôîđìàòèđàì %s â òèï %s"
+msgid "Phone number"
+msgstr "Òćëćôîíćí íîìćđ"
-#: ../../fs.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s ôîđìàòèđàíć îò %s ïđîâàëćíî"
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr "Ăđćűêà: \"%s\" äđàéâćđ çà âàűàòà êàđòà ć èíńòàëèđàí"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Öúêíćòć \"OK\", àêî èńêàòć äà èçòđèćòć âńèśêè äàííè è\n"
-"äÿëîâć ńúùćńòâóâàùè íà òîçè òâúđä äèńê. Âíèìàíèć, ńëćä öúêàíć íà \"OK\", "
-"íÿìàäà ìîæćòć äà âúçńòàíîâèòć êàêâèòî è äà áèëî äàííè è äÿëîâć ńúùćńòâóâàùè "
-"íà òîçè òâúđä äèńê,\n"
-"âêëțśèòćëíî êàêâèòî è äà ć Windows äàííè.\n"
-"\n"
-"Öúêíćòć \"Îòìÿíà\", çà äà îòìćíèòć òàçè îïćđàöèÿ áćç çàăóáà äà äàííèòć è\n"
-"äÿëîâćòć ńúùćńòâóâàùè íà òîçè òâúđä äèńê."
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer name, description, location"
+msgstr "Èìć íà ïđèíòćđà, îïèńàíèć, ìćńòîïîëîæćíèć"
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
+msgid "USA (broadcast)"
msgstr ""
-"Èçáćđćòć òâúđäèÿ äèńê, êîéòî èńêàòć äà èçòđćòć, çà äà\n"
-"èíńòàëèđàì íîâèÿ âè Mandrake Linux äÿë. Âíèìàíèć, âńèśêè äàííè íà íćăî ùć "
-"áúäàò çàăóáćíè\n"
-"è íÿìà äà ìîăàò äà ńć âúçńòàíîâÿò."
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
+"Please choose the\n"
+"media for backup."
msgstr ""
+"Ìîëÿ, èçáćđćòć\n"
+"íîńèòćë çà đćçćđâíî êîïèć."
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
-msgstr ""
+msgid "Use Xinerama extension"
+msgstr "Èçïîëçâàé đàçűèđćíèćòî Xinerama"
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
+msgid "Loopback"
+msgstr "Loopback"
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
msgstr ""
+"Íćìîæć äà ńć çàòâîđè ïđàâèëíî mkbootdisk: \n"
+" %s \n"
+" %s"
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
+msgid "West Europe"
+msgstr "Çàïàäíà Ćâđîïà"
-#: ../../help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
-msgstr ""
+msgid "Harddrake2 version %s"
+msgstr "Harddrake2 âćđńèÿ %s"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-"LILO (èëè LInux LOader) è Grub ńà bootloader-è: òć ìîăà äà ńòàđòèđàò\n"
-"GNU/Linux èëè êîÿ äà ć äđóăà îïćđàöèîííà ńèńòćìà ńúùćńòâóâàùà íà êîìïțòúđà "
-"âè.\n"
-"Îáèêíîâćííî, òćçè äđóăè îïćđàöèîííè ńèńòćìà ńć çàńèśàò è èíńòàëèđàò\n"
-"ïđàâèëíî. Àêî òîâà íć ńòàâà ïđè âàń, ìîæćòć äà äîáàâÿòć çàïèńè íà đúêà â\n"
-"òîçè ćêđàí. Ăëćäàéòć äà èçáćđćòć âćđíè ïàđàìćòđè.\n"
-"\n"
-"\n"
-"Ìîæć äà íć èńêàòć äà äàâàòć äîńòúï äî òćçè îïćđàöèîííè ńèńòćìè íà íèêîé,\n"
-"â êîéòî ńëóśàé ìîæćòć äà èçòđèćòć ńúîòâćòíèòć çàïèńè. Íî â òàêúâ ńëóśàé,\n"
-"ùć ńć íóæäàćòć îò boot-äèńêćòà, çà äà ăè ńòàđòèđàòć !"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Copying %s"
+msgstr "Êîïèđàíć íà %s"
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
-msgstr ""
+msgid "Choose color"
+msgstr "Èçáćđîđ íà öâÿò"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
-msgstr ""
+msgid "Dominican Republic"
+msgstr "Äîìèíèêàíńêà Đćïóáëèêà"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Ìîëÿ, èçáćđćòć âćđíèÿ ïîđò. Íàïđèìćđ, ïîđòúò COM1 ïîä Windows ïîä GNU/Linux\n"
-"ńć íàđèśà ttyS0."
+msgid "Swaziland"
+msgstr "Ńâàçèëćíä"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
-msgstr ""
-"Ïî ïîäđàçáèđàíć, DrakX ïđćäïîëàăà ść èìàòć äâóáóòîííà ìèűêà è ùć âêëțśè\n"
-"ńèìóëèđàíć íà òđè áóòîíà. DrakX àâòîìàòèśíî đàçáèđà äàëè ć PS/2, ńćđèéíà "
-"èëè\n"
-"USB ìèűêà.\n"
-"\n"
-"Àêî èńêàòć äà îïđćäćëèòć äđóă òèï íà ìèűêàòà, èçáćđćòć ïîäőîäÿù îò ńïèńúêà,\n"
-"êîéòî ùć âè áúäć ïđćäńòàâćí.\n"
-"\n"
-"Àêî èçáćđćòć ìèűêà đàçëèśíà îò òàçè ïî ïîäđàçáèđàíć, ùć âè áúäć ïđćäîńòàâćí\n"
-"ćêđàí çà ïđîáà. Èçïîëçâàéòć áóòîíèòć è êîëćëöćòî, çà äà ïđîâćđèòć, ść\n"
-"íàńòđîéêàòà ć äîđà. Àêî ìèűêàòà íć đàáîòè, êàêòî òđÿáâà, íàòèńíćòć èíòćđâàë\n"
-"èëè ŃĆ ÂÚĐÍĆÒĆ êúì \"Îòêàç\" è èçáćđćòć ïàê."
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Set-UID"
+msgstr "Çàäàâà-UID"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
-msgstr ""
-"Ìîëÿ, öúêíćòć íà ïđćäïîśèòàíèÿ ćçèê íà èíńòàëàöèÿ è ńèńòćìíà óïîòđćáà.\n"
-"\n"
-"Öúêàíćòî íà áóòîíà \"Íàïđćäíèśàâ\" ùć âè ïîçâîëè äà èçáćđćòć äđóăè ćçèöè\n"
-"äà áúäàò èíńòàëèđàíè íà đàáîòíàòà âè ńòàíöèÿ. Èçáèđàíćòî íà äđóăè ćçèöè\n"
-"ùć èíńòàëèđà ôàéëîâć ńïćöèâèśíè çà ćçèöèòć çà ńèńòćìíà äîêóìćíòàöèÿ è\n"
-"ïđèëîæćíèÿ. Íàïđèìćđ, àêî èìàòć ïîòđćáèòćëè îò Èçïàíèÿ íà ìàűèíàòà ńè,\n"
-"èçáćđćòć àíăëèéńêè êàòî ăëàâćí ćçèê â äúđâîâèäíàòà ôîđìà è â ńćêöèÿ\n"
-"\"Íàïđćäíèśàâ\" öúêíćòć íà ńèâàòà çâćçäà ńúîòâćòńòâàùà íà\n"
-"\"Èńïàíńêè|Èńïàíèÿ\".\n"
-"Îòáćëćæćòć, ść ìîăàò äà áúäàò èíńòàëèđàíè íÿêîëêî ćçèêà. Âćäíúæ èçáđàí\n"
-"íÿêàêúâ ëîêàë, öúêíćòć áóòîíà \"OK\", çà äà ïđîäúëæèòć."
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please check if you are using CDRW media"
+msgstr "Ìîëÿ, ïđîâćđćòć äàëè èçïîëçâàòć CDRW ìćäèÿ"
#: ../../help.pm:1
-#, fuzzy, c-format
+#, c-format
msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
msgstr ""
-"Îáèêíîâćíî, DrakX áè òđÿáâàëî äà èçáćđć ïđàâèëíàòà çà âàń êëàâèàòóđà (â "
-"çàâèńèìîńò\n"
-"îò ćçèêà, êîéòî ńòć èçáđàëè) è íÿìà äà ńć íàëîæè äà âèäèòć òàçè ńòúïêà. "
-"Îáàść ìîæć äà\n"
-"íÿìàòć êëàâèàòóđà ńúîòâćòńòâàùà òîśíî íà âàűèÿ ćçèê: íàïđèìćđ, àêî ńòć "
-"àíăëîăîâîđÿù űâćä,\n"
-"ìîæć áè ùć èńêàòć êëàâèàòóđàòà âè äà áúäć űâćäńêà. Èëè àêî ăîâîđèòć "
-"aíăëèéńêè, íî ńòć\n"
-"â Êâćáćê, ìîæć áè ùć ńòć â ńúùàòà ńèòóàöèÿ. È â äâàòà ńëóśàÿ, ùć òđÿáâà äà "
-"ńć âúđíćòć\n"
-"êúì òàçè èíńòàëàöèîííà ńòúïêà è äà èçáćđćòć ïđàâèëíàòà êëàâèàòóđà îò "
-"ńïèńúêà.\n"
-"\n"
-"Âńèśêî, êîćòî òđÿáâà äà íàïđàâèòć, ć äà ïîńîśèòć ïđćäïîśèòàíàòà êëàâèàòóđíà "
-"íàđćäáà\n"
-"îò ńïèńúêà, êîéòî ùć ńć ïîÿâè ïđćä âàń.\n"
-"\n"
-"Àêî èìàòć êëàâèàòóđà îò ćçèê đàçëèśćí îò òîçè èçïîëçâàí ïî ïîäđàçáèđàíć, "
-"öúêíćòć\n"
-"íà áóòîíà \"Íàïđćäíèśàâ\". Ùć âè áúäć ïđćäîńòàâćí ïúëćí ńïèńúê ń "
-"ïîääúđæàíèòć êëàâèàòóđè."
+"Èçáćđćòć òâúđäèÿ äèńê, êîéòî èńêàòć äà èçòđèćòć, çà äà\n"
+"èíńòàëèđàì íîâèÿ âè Mandrake Linux äÿë. Âíèìàíèć, âńèśêè äàííè íà íćăî ùć "
+"áúäàò çàăóáćíè\n"
+"è íÿìà äà ìîăàò äà ńć âúçńòàíîâÿò."
-#: ../../help.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
+msgid " on parallel port \\#%s"
+msgstr " íà ïàđàëćëćí ïîđò \\#%s"
-#: ../../help.pm:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
msgstr ""
+"Èçïîëçâà êëàâèűèòć %c è %c çà èçáîđ íà òîâà êîé çàïèń äà áúäć ïîäńâćòíàò."
-#: ../../help.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Áćűć çàńćśćí ïîâćść îò ćäèí Microsoft Windows äÿë\n"
-"íà òâúđäèÿ âè äèńêà. Èçáćđćòć òîçè, śèÿòî äúëæèíà èńêàòć äà ïđîìćíèòć, çà "
-"äà\n"
-"èíńòàëèđàòć Mandrake Linux îïćđàöèîííà ńèńòćìà.\n"
-"\n"
-"\n"
-"Çà èíôîđìàöèÿ, âńćêè äÿë ć èçáđîćí êàêòî ńëćäâà: \"Linux èìć\", \"Windows èìć"
-"\", \"Êàïàöèòćò\".\n"
-"\n"
-"\"Linux èìćòî\" ńć êîäèđà êàêòî ńëćäâà: \"òèï íà äèńêà\", \"íîìćđ íà äèńêà"
-"\",\n"
-"\"íîìćđ íà äÿë\" (íàïđèìćđ, \"hda1\").\n"
-"\n"
-"\n"
-"\"Òèïúò íà äèńêà\" ìîæć äà ć \"hd\", àêî ć IDE òâúđä äèńê, èëè \"sd\", àêî "
-"ć\n"
-"SCSI òâúđä äèńê.\n"
-"\n"
-"\n"
-"\"Íîìćđúò íà äèńêà\" âèíàăè ć áóêâàòà ńëćä \"hd\" èëè \"sd\". Ïđè IDE "
-"äèńêîâć:\n"
-"\n"
-" * \"a\" îçíàśàâà \"master äèńê íà ïúđâèÿ IDE êîíòđîëćđ\",\n"
-" * \"b\" îçíàśàâà \"slave äèńê íà ïúđâèÿ IDE êîíòđîëćđ\",\n"
-" * \"c\" îçíàśàâà \"master äèńê íà âòîđèÿ IDE êîíòđîëćđ\",\n"
-" * \"d\" îçíàśàâà \"slave äèńê íà âòîđèÿ IDE êîíòđîëćđ\".\n"
-"\n"
-"\n"
-"Ïđè SCSI óńòđîéńòâà, \"a\" îçíàśàâà \"ïúđâè òâúđä äèńê\", \"b\" îçíàśàâà "
-"\"âòîđè òâúđä äèńê\" è ò.í..\n"
-"\n"
-"\"Windows èìćòî\" ć áóêâàòà íà òâúđäèÿ âè äèńê ïîä Windows (ïúđâèÿò äèńê "
-"èëè\n"
-"äÿë ńć íàđèśà \"C:\")."
+msgid "Generic 2 Button Mouse"
+msgstr "Îáèêíîâćííà 2-áóòîííà ìèűêà"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Â òîçè ìîìćíò òđÿáâà äà èçáćđćòć êîé äÿëîâć äà áúäàò èçïîëçâàíè çà "
-"èíńòàëàöèÿ\n"
-"íà âàűàòà Mandrake Linux ńèńòćìà. Àêî äÿëîâćòć âćść ńà îïđćäćëćíè, äàëè îò\n"
-"ïđćäèűíà èíńòàëàöèÿ íà GNU/Linux èëè îò äđóă èíńòđóìćíò çà đàçäćëÿíć, "
-"ìîæćòć\n"
-"äà èçïîëçâàòć ńúùćńòâóâàùèòć äàëîâć. Â ïđîòèâćí ńëóśàé òđÿáâà äà îïđćäćëèòć\n"
-"äÿëîâć îò òâúđäèÿ äèńê.\n"
-"\n"
-"Çà äà ńúçäàäćòć äÿëîâć, òđÿáâà ïúđâî äà èçáćđćòć òâúđä äèńê. Ìîæćòć äà\n"
-"èçáćđćòć äèńê çà đàçäćëÿíć, êàòî öúêíćòć íà \"hda\" çà ïúđâî IDE "
-"óńòđîéńòâî,\n"
-"\"hdb\" çà âòîđîòî, \"sda\" çà ïúđâî SCSI óńòđîéńòâî è ò.í..\n"
-"\n"
-"Çà äà đàçäćëèòć èçáđàíèÿ òâúđ äèńê, ìîæćòć äà èçïîëçâàòć ńëćäíèÿ îïöèè:\n"
-"\n"
-" * \"Èçśèńòè âńèśêî\": òàçè îïöèÿ èçòđèâà âńèśêè äÿëîâć íà èçáđàíèÿ äèńê.\n"
-"\n"
-" * \"Àâòîìàòèśíî ńúçäàâàíć\": òàçè îïöèÿ ïîçâîëÿâà àâòîìàòèśíî äà ńúçàäćòć\n"
-"Ext2 è swap äÿëîâć â ńâîáîäíîòî ïđîńòđàíńòâî íà òâúđäèÿ âè äèńê.\n"
-"\n"
-" * \"Ńïàńè òàáëèöàòà ń äÿëîâć\": àêî òàáëèöàòà ń äÿëîâć ć ïîâđćäćíà, ìîæćòć\n"
-"äà ńć îïèòàòć äà ÿ âúçńòàíîâèòć ń òàçè îïöèÿ. Ìîëÿ, áúäćòć âíèìàòćëíè è\n"
-"ïîìíćòć, ść ìîæć äà íć ńòàíć.\n"
-"\n"
-" * \"Âúđíè\": èçïîëçâàéòć òàçè îïöèÿ, çà äà îòìćíèòć ïđîìćíèòć.\n"
-"\n"
-" * \"Ïđćçàđćäè\": ìîæćòć äà èçïîëçâàòć òàçè îïöèÿ, àêî èńêàòć äà âúđíćòć\n"
-"âńèśêè ïđîìćíè è äà çàđćäèòć ïúđâîíàśàëíàòà òàáëèöà ń äÿëîâć.\n"
-"\n"
-" * \"Ìàăüîńíèê\": èçïîëçâàéòć òàçè îïöèÿ, àêî èńêàòć äà èçïîëçâàòć "
-"ìàăüîńíèê,\n"
-"äà đàçäćëè òâúđäèÿ âè äèńê. Òîâà ńć ïđćïîđúśâà, àêî íÿìàòć äîńòàòúśíî "
-"ïîçíàíèÿ\n"
-"çà đàçäćëÿíćòî.\n"
-"\n"
-" * \"Âúçńòàíîâè îò äèńêćòà\": òàçè îïöèÿ ùć âè ïîçâîëè äà âúçńòàíîâèòć "
-"çàïàçćíà\n"
-"ïđćäè òîâà íà äèńêćòà òàáëèöà ń äÿëîâć.\n"
-"\n"
-" * \"Çàïàçè íà äèńêćòà\": çàïàçâà òàáëèöàòà ń äÿëîâć íà äèńêćòà. Ïîëćçíî ć "
-"ïđè\n"
-"ćâćíòóàëíî âúçńòàíîâÿâàíć íà òàáëèöàòà ïđè íćîáőîäèìîńò. Ńèëíî ńć "
-"ïđćïîđúśâà\n"
-"äà íàïđàâèòć òîâà.\n"
-"\n"
-" * \"Ăîòîâî\": êîăàòî ńòć ńâúđűèëè ń đàçäćëÿíćòî íà òâúđäèÿ ńè äèńê, òîâà "
-"ùć\n"
-"çàïèűć ïđîìćíèòć âúđőó äèńêà.\n"
-"\n"
-"Çàáćëćæćòà: ìîæćòć äà äîńòèăíćòć âńÿêà îïöèÿ èçïîëçâàéêè êëàâèàòóđàòà.\n"
-"Ìèíàâàéòć ïđćç äÿëîâćòć èçïîëçâàéêè [Tab} è ńòđćëêèòć íàăîđć/íàäîëó.\n"
-"\n"
-"Êîăàòî ć èçáđàí äÿë, ìîæćòć äà èçïîëçâàòć:\n"
-"\n"
-" * Ctrl-c, çà äà ńúçäàäćòć íîâ äÿë (àêî ć èçáđàí ïđàçćí äÿë);\n"
-"\n"
-" * Ctrl-d, çà äà èçòđèćòć äÿë;\n"
-"\n"
-" * Ctrl-m, çà äà óńòàíîâèòć òîśêà íà ìîíòèđàíć.\n"
-"\n"
-"Àêî èíńòàëèòć íà PPC ìàűèíà, ńèăóđíî ùć èńêàòć äà ńúçäàäćòć ìàëúê HFS\n"
-"\"bootstrap\" äÿë îò ïîíć 1 ÌÁ, êîéòî ùć áúäć èçïîëçâàò îò boot loader-úò\n"
-"yaboot. Àêî ńìÿòàòć äà íàïđàâèòć äÿëà ïî-ăîëÿì, íàïđèìćđ 50 ÌÁ, ìîæćòć äà "
-"ăî\n"
-"íàìćđèòć çà ïîëćçíî ìÿńòî, êúäćòî äà ńúőđàíÿâàòć íÿêîć ÿäđî èëè image íà\n"
-"ramdisk â ńëóśàé íà èçâúíđćäíè ńèòóàöèè."
+#: ../../lvm.pm:1
+#, c-format
+msgid "Remove the logical volumes first\n"
+msgstr "Ïúđâî ïđćìàőíè ëîăèśíèòć äÿëîâî\n"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Â òîçè ìîìćíò, òđÿáâà äà èçáćđćòć íèâîòî íà ńèăóđíîńò, êîćòî èńêàòć çà\n"
-"ìàűèíàòà. Ïî ïđàâèëî, êîëêîòî ïîâćść ìàűèíàòà âè ć äîńòúïíà è êîëêîòî "
-"ïîâćść\n"
-"äàííè ńć ńúőđàíÿâàò íà íćÿ, òîëêîâà ïî-âèńîêî òđÿáâà äà ć íèâîòî íà "
-"ńèăóđíîńò.\n"
-"Âúïđćêè òîâà, âèńîêàòà ńèăóđíîńò ć çà ńìćòêà íà ëćêîòàòà íà đàáîòà.\n"
-"Îáúđíćòć ńć êúì ăëàâàòà MSEC íà Reference Manual, çà äà ïîëóśèòć ïîâćść "
-"èíôîđìàöèÿ\n"
-"çà çíàśćíèćòî íà òćçè íèâà.\n"
-"\n"
-"Àêî íć çíàćòć êàêòî äà èçáćđćòć, èçáćđćòć îïöèÿòà ïî ïîäđàçáèđàíć."
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
+#, c-format
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "Ïîäńâćòíàòèÿò çàïèń ùć çàđćäè àâòîìàòèśíî ńëćä %d ńćêóíäè."
-#: ../../help.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
msgstr ""
+"Íć ìîăà äà ïèűà â /etc/sysconfig/bootsplash\n"
+"Ôàéëà íć ć íàìćđćí."
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet access"
+msgstr "Èíòćđíćò äîńòúï"
+
+#: ../../standalone/draksplash:1
+#, c-format
msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
+"y coordinate of text box\n"
+"in number of characters"
msgstr ""
-"Âńèśêè íîâîäćôèíèđàíè äÿëîâć òđÿáâà äà áúäàò ôîđìàòèđàíè, çà äà ńć "
-"èçïîëçâàò\n"
-"(ôîđìàòèđàíć îçíàśàâà ńúçäàâàíć íà ôàéëîâà ńèńòćìà).\n"
-"\n"
-"Â òîçè ìîìćíòà ìîæć áè èńêàòć äà ïđćôîđìàòèđàòć íÿêîè ńúùćńòâóâàùè äÿëîâć, "
-"çà\n"
-"äà èçòđèćòć âńÿêàêâè äàííè, êîèòî ńúäúđæàò. Àêî èńêàòć äà ăî íàïđàâèòć, "
-"ìîëÿ\n"
-"èçáćđćòć òÿő.\n"
-"\n"
-"Ìîëÿ, îòáćëćæćòć, ść íć ć íćîáőîäèìî äà ïđćôîđìàòèđàòć âńèśêè äÿëîâć\n"
-"ńúùćńòâóâàùè îòïđćäè. Òđÿáâà äà ïđćôîđìàòèđàòć äÿëîâćòć ńúäúđæàùè\n"
-"îïćđàöèîííàòà ńèńòćìà (êàòî \"/\", \"/usr\" èëè \"/var\"), íî òîâà íć ć\n"
-"çàäúëæèòćëíî çà äÿëîâć ńúäúđæàùè äàííè, êîèòî èńêàòć äà çàïàçèòć "
-"(îáèêíîâćíî\n"
-"\"/home\").\n"
-"\n"
-"Ìîëÿ, áúäćòć âíèìàòćëíè, êîăàòî èçáèđàòć äÿëîâćòć. Ńëćä ôîđìàòèđàíć âńèśêè\n"
-"äàííè íà ïîńîśćíèòć äÿëîâć ùć áúäàò èçòđèòè è íÿìà äà ìîæćòć äà ăè\n"
-"âúçńòàíîâèòć.\n"
-"\n"
-"Öúêíćòć \"OK\", êîăàòî ńòć ăîòîâè äà ôîđìàòèđàòć äàëîâć.\n"
-"\n"
-"Öúêíćòć \"Îòêàç\", àêî èńêàòć äà èçáćđćòć äđóăè äÿëîâć çà èíńòàëàöèÿ íà "
-"íîâàòà\n"
-"ńè Mandrake Linux îïćđàöèîííà ńèńòćìà.\n"
-"\n"
-"Öúêíćòć \"Íàïđćäíèśàâ\", àêî èńêàòć äà èçáćđćòć äÿëîâć, êîèòî äà áúäàò\n"
-"ïđîâćđćíè çà ëîűè áëîêîâć îò äèńêà."
+"y êîîđäèíàòè íà òćêńòîâàòà đàìêà\n"
+"â áđîé ńèìâîëè"
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
msgstr ""
-"À òàêà ! Èíńòàëàöèÿòà ć çàâúđűćíà è GNU/Linux ńèńòćìàòà âè ć ăîòîâà çà\n"
-"óïîòđćáà. Ïđîńòî öúêíćòć \"OK\", çà äà đćńòàđòèđàòć ńèńòćìàòà. Ìîæćòć äà\n"
-"ńòàđòèđàòć GNU/Linux èëè Windows, êîćòî ïđćäïîśèòàòć (àêî èìàòć äâć "
-"ńèńòćìè),\n"
-"âćäíàăà ńëćä êàòî êîìïțòúđúò ńòàđòèđà îòíîâî.\n"
-"\n"
-"Áóòîíà \"Íàïđćäíèśàâ\" (ńàìî â \"Ćêńïćđòćí\") ïîêàçâà îùć äâà áóòîíà çà:\n"
-"\n"
-" * \"ăćíćđèđàíć íà äèńêćòà çà àâòîìàòèśíà èíńòàëàöèÿ\": çà äà ńúçäàäćòć\n"
-"èíńòàëàöèîííà äèńêćòà, êîÿòî ńëćä òîâà àâòîìàòèśíî äà èçśúđűâà öÿëàòà\n"
-"èíńòàëàöèÿ áćç ïîìîùòà íà îïćđàòîđ, ïđèëèśàùà íà èíńòàëàöèÿòà, êîÿòî òîêó-"
-"ùî\n"
-"ńòć èçâúđűèëè.\n"
-"\n"
-" Îòáćëćæćòć, ść äâć đàçëèśíè îïöèè ńà äîńòúíè, śđćç öúêàíć íà áóòîíà:\n"
-"\n"
-" * \"Ïđćèăđàé\". Òîâà ć śàńòèśíî àâòîìàòèçèđàíà èíńòàëàöèÿ êàòî ńòúïêèòć\n"
-"ïî đàçäćëÿíć íà äÿëîâć îńòàâàò èíòćđàêòèâíè.\n"
-"\n"
-" * \"Àâòîìàòèśíà\". Íàïúëíî àâòîìàòèśíà èíńòàëàöèÿ: òâúđäèÿò äèńê ńć\n"
-"ïđćçàïèńâà íàïúëíî, âńÿêàêâè äàííè ńć çàăóáâàò.\n"
-"\n"
-" Òàçè îńîáćíîńò ć ìíîăî óäîáíà, êîăàòî èíńòàëèđàòć ăîëÿì áđîé ïîäîáíî\n"
-"ìàűèíè. Âèæòć ńćêöèÿòà çà àâòîìàòèśíà èíńòàëàöèÿ íà íàűèÿ web-ńàéò.\n"
-"\n"
-" * \"Çàïàçè èçáîđà íà ïàêćòè\"(*): çàïàçâà èçáîđà íà ïàêćòè, òàêà êàêòî "
-"ć\n"
-"íàïđàâćí ïđćäè. Êîăàòî ïđàâèòć äđóăà èíńòàëàöèÿ, âêàđàéòć äèńêćòàòà â\n"
-"óńòđîéńòâîòî è ïóńíćòć èíńòàëàöèÿòà äà âúđâè śđćç ïîìîùíèÿ ćêđàí, êàòî\n"
-"íàòèńíćòć êëàâèűà [F1] è êàòî íàïèűćòć >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) Òđÿáâà âè FAT-ôîđìàòèđàíà äèńêćòà (çà äà ńúçäàäćòć òàêâà ïîä GNU/Linux,\n"
-"íàïèűćòć \"mformat a:\")"
+"Çà äà âèäèòć ńïèńúê ń äîńòúïíèòć îïöèè çà òćêóùèÿ ïđèíòćđ, öúêíćòć íà áóòîíà "
+"\"Ńïèńúê ń îïöèè çà ïćśàò\"."
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Enabling servers..."
+msgstr "Âêëțśâàíć íà ńúđâúđè ..."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing test page(s)..."
+msgstr "Îòïćśàòâàíć íà òćńòîâ(àòà/èòć) ńòđàíèö(à/è) ..."
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "There is already a partition with mount point %s\n"
+msgstr "Âćść èìà äÿë ìîíòèđàí íà òîâà ìÿńòî %s\n"
#: ../../help.pm:1
#, fuzzy, c-format
@@ -2026,51 +1986,49 @@ msgid ""
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
msgstr ""
"Â òîçè ìîìćíò òđÿáâà èçáćđćòć êúäć íà òâúđäèÿ ńè äèńêà äà èíńòàëèđàòć "
"âàűàòà\n"
@@ -2148,194 +2106,119 @@ msgstr ""
"ìíîăî ëćńíî äà çàăóáèòć âńèśêè äàííè. Òàêà ść íć èçáèđàéòć òîâà, àêî íć\n"
"çíàćòć êàêâî ïđàâèòć."
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Íàêđàÿ, ùć áúäćòć ïîïèòàíè äàëè èńêàòć äà âèæäàòć ăđàôèśíèÿ èíòćđôćéń ïđè\n"
-"çàđćæäàíć. Îòáćëćæćòć, ść òîçè âúïđîń ùć âè áúäć çàäàäćí äàæć àêî èçáćđćòć,\n"
-"äà íć òćńòâàòć íàńòđîéêàòà. Îśćâèäíî, áèőòć îòăîâîđèëè ń \"Íć\", àêî "
-"ìàűèíàòà\n"
-"ùć đàáîòè êàòî ńúđâúđ èëè àêî íÿìà óńïćűíî íàńòđîćí äèńïëćé."
+msgid "Ukraine"
+msgstr "Óêđàéíà"
-#: ../../help.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
+msgid "Application:"
+msgstr "Ïđèëîæćíèć:"
-#: ../../help.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
-msgstr ""
+msgid "External ISDN modem"
+msgstr "Âúíűćí ISDN ìîäćì"
-#: ../../help.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
+msgid "if set to yes, report check result by mail."
+msgstr "àêî ć çàäàćíî äà, èçïđàùà ïî ïîùàòà ńúîáùćíèć çà đćçóëòàòà."
+
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Your choice? (default %s) "
+msgstr "Âàűèÿò èçáîđ ? (ïî ïîäđàçáèđàíć ć %s)"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
msgstr ""
-#: ../../help.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid " / Region"
+msgstr "/ Đćăèîí"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
+"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
-"Test\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
"\n"
-"Options\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
-" You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
msgstr ""
+"Òćńòîâèòć ńòđàíèöè ńà èçïđàòćíè êúì ïđèíòćđà.\n"
+"Ìîæć äà îòíćìć ìàëêî âđćìć ïđćäè ïđèíòćđà äà çàïîśíć.\n"
+"Ńúńòîÿíèć íà ïćśàòà:\n"
+"%s\n"
+"\n"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
+msgid "daily"
msgstr ""
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Ńćăà ìîæćòć äà èçáćđćòć êîè óńëóăè äà ńć ïóńêàò ïđè ńòàđòèđàíć.\n"
-"\n"
-"Òóê ńà ïđćäńòàâćíè âńèśêè óńëóăè, äîńòúïíè ń íàńòîÿùàòà èíńòàëàöèÿ.\n"
-"Ïđćăëćäàéòć ăè âíèìàòćëíî è èçêëțśćòć òćçè, êîèòî íć âè òđÿáâàò âèíàăè ïđè "
-"ńòàđòèđàíć.\n"
-"\n"
-"Ìîæćòć âèäèòć êđàòúê îáÿńíèòćëćí òćêńò çà óńëóăàòà, êàòî ïîńòàâèòć êóđîđà íà "
-"ìèűêàòà ńè\n"
-"íàä èìćòî íà óńëóăàòà. Àêî íć ńòć ńèăóđíè, äàëè óńëóăàòà ć ïîëćçíà èëè íć, "
-"ïî-äîáđć\n"
-"ć äà îńòàâèòć èçáîđà ïî ïîäđàçáèđàíć.\n"
-"\n"
-"Âíèìàâàéòć ń òàçè ńòúïêà, àêî ńìÿòàòć äà èçïîëçâàòć ìàűèíàòà ńè êàòî "
-"ńúđâúđ:\n"
-"ńèăóđíî íć áèőòć èńêàëè äà ïóńêàòć óńëóăè, îò êîèòî íć ńć íóæäàćòć. Ìîëÿ,\n"
-"çàïîìíćòć, ść íÿêîè óńëóăè ìîăàò äà áúäàò îïàńíè, àêî ńà âêëțśćíè íà "
-"ńúđâúđà.\n"
-"Ïî ïđèíöèï, èçáèđàéòć ńàìî óńëóăèòć, îò êîèòî íàèńòèíà ńć íóæäàćòć."
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "and one unknown printer"
+msgstr "è ćäèí íćèçâćńòćí ïđèíòćđ"
-#: ../../help.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
+msgid "Ireland"
+msgstr "Èđëàíäèÿ"
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "kernel version"
+msgstr "âćđńèÿ íà ÿäđîòî"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid " Restore Configuration "
+msgstr " Êîíôèăóđàöèÿ çà âúçńòàíîâÿâàíć "
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Is this the correct setting?"
+msgstr "Âńèśêî ïđàâèëíî ëè ć ?"
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
@@ -2371,6155 +2254,6311 @@ msgstr ""
"ńâúđűèëè\n"
"ń íàńòđîéêàòà íà ìđćæàòà, öúêíćòć \"Îòêàç\"."
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
-"Íàêđàÿ, â çàâèńèìîńò îò èçáîđà âè äàëè äà èçáèđàòć ïàêćòè ćäèí ïî ćäèí, ùć\n"
-"âè áúäć ïđćäńòàâćíî äúđâî ńúäúđæàùî âńèśêè ïàêćòè ïîäđćäćíè ïî ăđóïè è\n"
-"ïîäđăđóïè. Äîêàòî îáőîæäàòć äúđâîòî, ìîæćòć äà èçáćđćòć öćëè ăđóïè, "
-"ïîäăđóïè\n"
-"èëè îòäćëíè ïàêćòè.\n"
-"\n"
-"Êîăàòî ïîńîśèòć ïàêćò îò äúđâîòî, ùć ńć ïîÿâè îïèńàíèć âäÿńíî. Êîăàòî\n"
-"èçáîđúò ć ïđèêëțśćí, öúêíćòć áóòîíà \"Èíńòàëèđàé\", êîéòî ùć ïóńíć ïđîöćńà\n"
-"íà èíńòàëàöèÿ. Â çàâèńèìîńò îò ńêîđîńòòà íà őàđäóćđà âè è áđîÿ íà ïàêćòèòć,\n"
-"êîèòî èńêàòć äà áúäàò èíńòàëèđàíè, ïđîöćńúò ìîæć äà îòíćìć èçâćńòíî âđćìć.\n"
-"Îśàêâàíîòî âđćìć çà ïđèêëțśâàíć íà ïđîöćńà, ść áúäć ïîêàçàíî íà ćêđàòà, çà\n"
-"äà âè ïîìîăíć äà ïđćöćíèòć äàëè èìàòć äîńòàòúśíî âđćìć äà ńć íàńëàäèòć íà\n"
-"śàűà êàôć.\n"
-"\n"
-"!! Àêî ć èçáđàí ńúđâúđćí ïàêćò, áèëî òî óìèűëćíî èëè çàùîòî ć śàńò îò öÿëà\n"
-"ăđóïà, ùć áúäćòć ïîìîëćíè çà ïîòâúđæäćíèć, ść íàèńòèíà èńêàòć òîçè ńúđâúđ\n"
-"äà áúäć èíńòàëèđàí. Â Mandrake Linux, âńèśêè ńúđâúđè òđúăâàò ïî "
-"ïîäđàçáèđàíć\n"
-"ïđè çàđćæäàíć.Äàæć àêî ńà ńèăóđíè è íÿìàò èçâćńòíè ïđîáëćìè, êîăàòî\n"
-"äèńòđèáóöèÿòà ńć đàçïđîńòđàíÿâà, ìîæć äà ńć ńëóśè òàêà, ść äà ńć ïîÿâÿò\n"
-"äóïêè â ńèăóđíîńòòà, ńëćä êàòî âćđńèÿòà íà Mandrake Linux ć çàâúđűćíà. Àêî\n"
-"íć çíàćòć çà êàêâî ńëóæè îïđćäćëćíà óńëóăà èëè çàùî ć èíńòàëèđàíà, öúêíćòć\n"
-"\"Íć\". Ń öúêàíć íà \"Äà\" ùć èíńòàëèđàòć èçáđîćíè óńëóăè è òć ùć áúäàò\n"
-"ńòàđòèđàíè àâòîìàòèśíî ïî ïîäđàçáèđàíć. !!\n"
-"\n"
-"Îïöèÿòà \"Àâòîìàòèśíè çàâèńèìîńòè\" èçêëțśâà ïđćäóïđćäèòćëíèòć äèàëîçè,\n"
-"êîăàòî èíńòàëàòîđúò àâîìàòèśíî đćűè èçáćđć ïàêćò. Òîâà ńć ńëóśâà, çàùîòî\n"
-"ć đćűèë, ść ńć íóæäàć äà çàäîâîëè çàâèńèìîńò ń äđóă ïàêćò, çà äà ïđèêëțśè\n"
-"óńïćűíî èíńòàëàöèÿòà.\n"
-"\n"
-"Ìàëêàòà èêîíêà íà äèńêćòêà â äúíîòî íà ńïèńúêà ïîçâîëÿâà äà çàđćäèòć ńïèńúê\n"
-"ń ïàêćòè îò ïđćäèűíà èíńòàëàöèÿ. Àêî öúêíćòć íà òàçè èêîíêà, ùć áúäćòć\n"
-"ïîìîëćíè äà âêàđàòć äèńêćòà ńúçäàäćíà ïđćäè òîâà â êđàÿ íà äđóăà "
-"èíńòàëàöèÿ.\n"
-"Âèæòć âòîđàòà ïîäńêàçêà ïî âđćìć íà ïîńëćäíàòà ńòúïêà, çà òîâà êàê äà\n"
-"ńúçäàäćòć òàêàâà äèńêćòà."
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Wizard Configuration"
+msgstr "Êîíôèăóđàöèÿ íà Ìàăüîńíèê"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Ńćăà ć ìîìćíòúò äà îïđćäćëèòć êîè ïđîăđàìè èńêàòć äà áúäàò èíńòàëèđàíè íà\n"
-"ńèńòćìàòà âè. Â Mandrake Linux äèńòđèáóöèÿòà èìà őèëÿäè ïàêćòè, íî íć ć\n"
-"çàäúëæèòćëíî äà ăè çíàćòć íàèçóńò.\n"
-"\n"
-"Àêî èçâúđűâàòć ńòàíäàđòíà èíńòëàöèÿ îò CDROM, ïúđâî ùć áúäćòć ïîïèòàíè êîè\n"
-"CD-òà èìàòć (â Ćêńïćđòćí đćæèì). Ïđîâćđćòć çàăëàâèÿòà íà CD-òàòà è ïîńîśćòć\n"
-"êóòèéêèòć ńúîòâćòńòâàùè íà CD-òàòà, ń êîèòî đàçïîëàăàòć. Öúêíćòć \"OK\",\n"
-"êîăàòî ńòć ăîòîâè äà ïđîäúëæèòć.\n"
-"\n"
-"Ïàêćòèòć ńà ïîäđćäćíè â ăđóïè ńúîòâćòńòâàùè íà ïđàêòèśćńêàòà óïîòđćáà íà\n"
-"ìàűèíàòà âè. Ăđóïèòć, ńàìè ïî ńćáć ńè, ńà ïîäđćäćíè â śćòèđè ńćêöèè:\n"
-"\n"
-" * \"Đàáîòíà ńòàíöèÿ\": àêî ńìÿòàòć äà èçïîëçâàòć ìàűèíàòà ńè êàòî đàáîòíà "
-"ńòàíöèÿ,\n"
-"èçáćđćòć ćäíà èëè ïîâćść ńúîòâćòíèòć ăđóïè.\n"
-"\n"
-" * \"Đàçđàáîòêà\": àêî ìàűèíàòà âè ùć áúäć èçïîëçâàíć çà ïđîăđàìèđàíć, "
-"èçáćđćòć\n"
-"æćëàíàòà(èòć) ăđóïà(è).\n"
-"\n"
-" * \"Ńúđâúđ\": íàêđàÿ, àêî ìàűèíàòà âè ùć áúäć èçïîëçâàíà çà ńúđâúđ, ùć\n"
-"ìîæćòć äà èçáćđćòć êîè îò íàé-śćńòî èçïîëçâàíèòć óńëóăè èńêàòć äà èìàòć\n"
-"èíńòàëèđàíè íà ìàűèíàòà.\n"
-"\n"
-" * \"Ăđàôèśíà ńđćäà\": òóê ìîæćòć äà èçáćđćòć ïđćäïîśèòàíàòà ăđàôèśíà "
-"ńđćäà.\n"
-"Ïîíć ćäíà òđÿáâà äà áúäć èçáđàíà, àêî èńêàòć äà èìàòć ăđàôèśíà ńđćäà !\n"
-"\n"
-"Ïđćìćńòâàéêè êóđńîđà íà ìèűíàòà íàä èìćòî íà ăđóïàòà, ùć âèäèòć êđàòúê\n"
-"îáÿńíćíèòćëćí òćêńò çà íćÿ.\n"
-"\n"
-"Ìîæćòć äà öúêíćòć êóòèéêàòà \"Èíäèâèäóàëćí èçáîđ íà ïàêćòè\", êîÿòî ć "
-"ïîëćçíà,\n"
-"àêî ńòć çàïîçíàòè ń ïàêćòèòć, êîèòî ùć âè áúäàò ïđćäëîæćíè èëè àêî èńêàòć "
-"äà\n"
-"èìàòć ïúëćí êîíòđîë íàä òîâà, êîćòî äà áúäć èíńòàëèđàíî.\n"
-"\n"
-"Àêî ńòć çàïîśíàëè èíńòàëàöèÿòà â đćæèì íà \"Îáíîâÿâàíć\", ìîæćòć äà "
-"èçêëțśèòć\n"
-"âńèśêè ăđóïè, çà äà èçáćăíćòć èíńòàëèđàíćòî íà íîâè ïàêćòè. Òîâà ć ïîëćçíî\n"
-"ïđè ïîïđàâêà èëè îáíîâÿâàíć íà ńúùćńòâóâàùàòà ńèńòćìà."
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "Autoprobe"
+msgstr "Àâòîìàòèśíî çàńèśàíć"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Backup system files..."
msgstr ""
-"Èíńòàëàöèÿòà íà Mandrake Linux ć đàçïîëîæćíà íà íÿêîëêî CDROM-à. DrakX\n"
-"çíàć äàëè èçáđàí ïàêćò íć ńć íàìèđà íà äđóă CDROM èëè ùć èçâàäè òćêóùîòî\n"
-"CD è ùć âè îńòàâè äà âêàđàòć òîâà, îò êîćòî èìà íóæäà."
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../install_any.pm:1
+#, c-format
+msgid "Can't use broadcast with no NIS domain"
+msgstr "Íć ìîæćòć äà èçïîëçâàòć broadcast áćç NIS äîìćéí"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Removing printer \"%s\"..."
+msgstr "Èçòđèâàíć íà ïđèíòćđ \"%s\"..."
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "drakfloppy"
+msgstr "drakfloppy"
+
+#: ../../standalone/drakpxe:1
+#, c-format
msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"Please indicate where the auto_install.cfg file is located.\n"
"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
msgstr ""
-"Ïî-ăîđć ńà èçáđîćíè çàńćśćíèòć Linux äÿëîâć ńúùćńòâóâàùè\n"
-"íà òâúđäèÿ âè äèńê. Ìîæćòć äà çàïàçèòć èçáîđà íàïđàâćí îò ìàăüîńíèêà, òć ńà\n"
-"äîáđè çà îáùà óïîòđćáà. Àêî ăè ïđîìćíèòć, òđÿáâà äà ïîíć äà îïđćäćëèòć\n"
-"root äÿë (\"/\"). Íć èçáèđàéòć ïđćêàëćíî ìàëêè äÿëîâć, çàùîòî íÿìà äà "
-"ìîæćòć\n"
-"äà èíńòàëèđàòć äîńòàòúśíî ńîôòóćđ. Àêî èńêàòć äà ńúőđàíÿâàòć äàííèòć ńè íà\n"
-"îòäćëćí äÿë, òđÿáâà äà èçáćđćòć \"/home\" (âúçìîæíî ć ńàìî, àêî èìàòć "
-"ïîâćść\n"
-"îò ćäèí Linux äÿë).\n"
-"\n"
-"\n"
-"Çà èíôîđìàöèÿ, âńćêè äÿë ć ïîêàçàí, êàêòî ńëćäâà: \"Èìć\", \"Êàïàöèòćò\".\n"
-"\n"
-"\n"
-"\"Èìćòî\" ńć êîäèđà êàêòî ńëćäâà: \"òèï íà äèńêà\", \"íîìćđ íà äèńêà\",\n"
-"\"íîìćđ íà äÿë\" (íàïđèìćđ, \"hda1\").\n"
-"\n"
-"\n"
-"\"Òèïúò íà äèńêà\" ìîæć äà ć \"hd\", àêî ć IDE òâúđä äèńê, èëè \"sd\", àêî "
-"ć\n"
-"SCSI òâúđä äèńê.\n"
-"\n"
-"\n"
-"\"Íîìćđúò íà äèńêà\" âèíàăè ć áóêâàòà ńëćä \"hd\" èëè \"sd\". Ïđè IDE "
-"äèńêîâć:\n"
-"\n"
-" * \"a\" îçíàśàâà \"master äèńê íà ïúđâèÿ IDE êîíòđîëćđ\",\n"
-" * \"b\" îçíàśàâà \"slave äèńê íà ïúđâèÿ IDE êîíòđîëćđ\",\n"
-" * \"c\" îçíàśàâà \"master äèńê íà âòîđèÿ IDE êîíòđîëćđ\",\n"
-" * \"d\" îçíàśàâà \"slave äèńê íà âòîđèÿ IDE êîíòđîëćđ\".\n"
-"\n"
-"\n"
-"Ïđè SCSI óńòđîéńòâà, \"a\" îçíàśàâà \"ïúđâè òâúđä äèńê\", \"b\" îçíàśàâà "
-"\"âòîđè òâúđä äèńê\" è ò.í.."
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "information level that can be obtained through the cpuid instruction"
msgstr ""
-"GNU/Linux ć ìíîăîïîòđćáèòćëńêà ńèńòćìà, êîÿòî îçíàśàâà, ść âńćêè ïîòđćáèòćë "
-"ìîæć\n"
-"äà èìà ńâîè ïđćäïîśćòàíèÿ, ôàéëîâć è ò.í.. ìîæćòć äà ïđîśćòćòć Đúêîâîńòâîòî "
-"íà\n"
-"Ïîòđćáèòćëÿ, çà äà íàóśèòć ïîâćść.\n"
-"Çà đàçëèêà îò Root, êîéòî ć àäìèíèńòđàòîđúò, ïîòđćáèòćëèòć, êîèòî ùć "
-"äîáàâèòć òóê\n"
-"íÿìà äà ìîăàò äà ïđîìćíÿò íèùî îńâćí ńîáńòâćíèòć ńè ôàéëîâć è òćőíèòć "
-"íàńòđîéêè.\n"
-"Ùć òđÿáâà äà ńúçäàäćòć ïîíć ćäèí îáèêíîâćí ïîòđćáèòćë çà ńćáć ńè.\n"
-"Ń òîçè àêàóíò ùć òđÿáâà äà âëèçàòć çà đóòèííà äćéíîńò. Âúïđćêè òîâà "
-"ïđàêòèêàòà\n"
-"äà âëèçàòć êàòî root ćæćäíćâíî, ìîæć äà áúäć ìíîăî îïàńíà ! È íàé-"
-"ìàëêàòàăđćűêà\n"
-"ìîæć äà îçíàśàâà, ść ńèńòćìàòà âè íÿìà äà đàáîòè ïîâćść. Àêî íàïđàâèòć íÿêîÿ "
-"ńćđèîçíà\n"
-"ăđćűêà êàòî ïîòđćáèòćë, òîâà ìîæć ńà äà äîâćäć äî çàăóáà íà śàńò îò "
-"èíôîđìàöèÿòà,\n"
-"íî íć è íà öÿëàòà ńèńòćìà.\n"
-"\n"
-"Ïúđâî, òđÿáâà äà ńè âúâćäćòć èìćòî. Òîâà íć ć çàäúëæèòćëíî, đàçáèđà ńć, "
-"âńúùíîńò\n"
-"ìîæćòć äà âúâćäćòć êàêâîòî è äà ć. DrakX ńëćä òîâà ùć èçáćđć ïúđâàòà "
-"âúâćäćíà\n"
-"â êóòèéêàòà äóìà è ùć ăî èçêàđà êàòî ïîòđćáèòćëńêî èìć. Òîâà ć èìćòî, ń "
-"êîćòî\n"
-"âńúùíîńò îïđćäćëćíèÿò ïîòđćáèòćë ùć âëèçà â ńèńòćìàòà. Ìîæćòć äà ăî "
-"ïđîìćíèòć.\n"
-"Òđÿáâà äà âúâćäćòć è ïàđîëà òóê. Ïàđîëàòà íà íćïđćâèëćăèđîâàí (îáèêíîâćí) "
-"ïîòđćáèòćë\n"
-"íć ć òîëêîâà ôàòàëíà êàòî òàçè íà Root îò ăëćäíà òîśêà íà ńèăóđíîńòòà, íî "
-"âńć\n"
-"ïàê íÿìà ïđèśèíà äà ÿ ïîäöćíÿâàòà, òúé êàòî đèńêóâàòć ôàéëîâćòć ńè.\n"
-"\n"
-"Ńëćä êàòî öúêíćòć íà \"Ïđèćìè ïîòđćáèòćë\", ìîæćòć äà äîáàâèòć êîëêîòî ńè "
-"èńêàòć.\n"
-"Äîáàâćòć ïî ćäèí ïîòđćáèòćë çà âńćêè îò ïđèÿòćëèòć ńè: áàùà ńè, ńćńòđà ńè, "
-"íàïđèìćđ.\n"
-"Êîăàòî ńòć äîáàâèëè âńèśêè ïîòđćáèòćëè, êîèòî èńêàòć, öúêíćòć Ăîòîâî.\n"
-"\n"
-"Öúêíćòć íà áóòîíà \"Íàïđćäíèśàâ\", çà äà ïđîìćíèòć îáâèâêàòà ïî ïîäđàçáèđàíć "
-"íà\n"
-"ïîòđćáèòćëÿ (bash ïî ïîäđàçáèđàíć)."
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
-msgstr ""
-"Ïđćäè äà ïđîäúëæèòć, òđÿáâà âíèìàòćëíî äà ïđîśćòćòć óńëîâèÿòà íà ëèöćíçà. "
-"Òîé\n"
-"ïîêđèâà öÿëàòà Mandrake Linux äèńòđèáóöèÿ, è, àêî íć ńòć ńúăëàńíè ń âńèśêè "
-"óńëîâèÿ\n"
-"â íćăî, öúêíćòć íà áóòîíà Îòêàç. Òîâà íćçàáàâíî ùć ïđèêëțśè èíńòàëàöèÿòà. Çà "
-"äà\n"
-"ïđîäúëæèòć ń èíńòàëàöèÿòà, öúêíćòć íà áóòîíà Ïđèćìè."
+#: ../../lang.pm:1
+#, c-format
+msgid "Peru"
+msgstr "Ïćđó"
-#: ../../install2.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You must also format %s"
-msgstr "Âèć òđÿáâà ńúùî äà ôîđìàòèđàòć %s"
+msgid " on device: %s"
+msgstr " íà óńòđîéńòâî: %s"
-#: ../../install2.pm:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Remove Windows(TM)"
+msgstr "Ïđćìàőíè Windows(TM)"
+
+#: ../../services.pm:1
+#, c-format
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr "Ńòàđòèđà X Font Server (òîâà ć çàäúëæèòćëíî, çà äà òđúăíć XFree)."
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
msgstr ""
-"Íÿìàì äîńòúï äà ìîäóëèòć íà ÿäđîòî ńúîòâćòńòâàùè íà âàűèÿò (ôàéë %s ëèïńâà), "
-"òîâà îçíàśàâà, ść âàűćòî ôëîïè íć ć ńèíőđîíèçèđàíî ń èíńòàëàöèîííèÿò íîńèòćë "
-"(ìîëÿ íàïđàâćòć íîâî boot ôëîïè)"
+"Ïîâćśćòî îò òćçè ńòîéíîńòè ńà èçâëćśćíè\n"
+"îò âàűàòà đàáîòćùà ńèńòćìà.\n"
+"Âèć ìîæć äà ăè ïđîìćíèòć ïđè íćîáőîäèìîńò."
-#: ../../install_any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
+msgid "Select the font file or directory and click on 'Add'"
msgstr ""
-"Ïîÿâè ńć ăđćűêà - íć ńà îòêđèòè âàëèäíè óńòđîéńòâà, âúđőó êîèòî äà áúäàò "
-"ńúçäàäćíè íîâè ôàéëîâè ńèńòćìè. Ìîëÿ ïđîâćđćòć òâúđäèÿ ńè äèńê ńè çà "
-"ïđèśèíàòà çà òîçè ïđîáëćì"
-#: ../../install_any.pm:1 ../../partition_table.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Error reading file %s"
-msgstr "Ăđćűêà ïđè śćòćíćòî íà ôàéëà %s"
+msgid "Madagascar"
+msgstr "Ìàäàăàńêàđ"
-#: ../../install_any.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
+msgid "Urpmi"
msgstr ""
-"Çà äà èçïîëçâàòć çàïàçćí èçáîđ íà ïàêćòè, ńòàđòèđàéòć èíńòàëàöèÿòà ń ``linux "
-"defcfg=floppy''"
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "Òàçè äèńêćòà íć ć ôîđìàòèđàíà íà FAT"
+msgid "Cron not available yet as non-root"
+msgstr ""
-#: ../../install_any.pm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Ńëîæćòć FAT ôîđìàòèđàíà äèńêćòà â óńòđîéńòâî %s"
+msgid "System"
+msgstr "Ńèńòćìà"
-#: ../../install_any.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Íć ìîæćòć äà èçïîëçâàòć broadcast áćç NIS äîìćéí"
+msgid "Do you want to use this feature?"
+msgstr "Èńêàòć ëè äà èçïîëçâàòć òàçè îńîáćíîńò?"
-#: ../../install_any.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Arabic"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
"\n"
-"Do you really want to remove these packages?\n"
+"- Options:\n"
msgstr ""
-"Ńëćäíèòć ïàêćòè ùć áúäàò èçòđèòè çà äà ńć ïîçâîëè îáíîâÿâàíć íà ńèńòćìàòà: %"
-"s\n"
-"\n"
"\n"
-"Äćéńòâèòćëíî ëè èńêàòć äà èçòđèćòć òćçè ïàêćòè?\n"
+"- Îïöèè:\n"
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No"
-msgstr "Íć"
+msgid "Password required"
+msgstr "Èçèńêâà ïàđîëà"
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../common.pm:1
#, c-format
-msgid "Yes"
-msgstr "Äà"
+msgid "%d minutes"
+msgstr "%d ìèíóòè"
-#: ../../install_any.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Èçáđàëè ńòć ńëćäíèÿ(òć) ńúđâúđ(è): %s\n"
-"\n"
-"\n"
-"Òćçè ńúđâúđè ńć àêòèâèđàò ïî ïîäđàçáèđàíć. Òć íÿìàò èçâćńòíè ïđîáëćìè ńúń\n"
-"ńèăóđíîńòòà, íî ìîæć äà ńć íàìćđÿò íîâè. Â òîçè ńëóśàé, ùć òđÿáâà äà ńòć\n"
-"ńèăóđíè, ść ùć íàäăđàæäàòć âúçìîæíî íàé-áúđçî.\n"
-"\n"
-"\n"
-"Íàèńòèíà ëè èńêàòć äà èíńòàëèđàòć òćçè ńúđâúđè ?\n"
+msgid "Graphics card: %s"
+msgstr "Ăđàôèśíà êàđòà: %s"
-#: ../../install_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "System configuration"
-msgstr "Êîíôèăóđàöèÿ íà ńèńòćìà"
+msgid "WebDAV transfer failed!"
+msgstr ""
-#: ../../install_gtk.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "System installation"
-msgstr "Èíńòàëàöèÿ íà ńèńòćìà"
+msgid "XFree configuration"
+msgstr "Íàńòđîéêà íà XFree"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Bringing down the network"
-msgstr "Èçêëțśâàíć íà ìđćæàòà"
+msgid "Choose action"
+msgstr "Èçáćđćòć äćéńòâèć"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Bringing up the network"
-msgstr "Âêëțśâàì ìđćæàòà"
+msgid "French Polynesia"
+msgstr "Ôđćíńêà Ïîëèíćçèÿ"
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
+msgstr ""
+"Ïî ïîäđàçáèđàíć, DrakX ïđćäïîëàăà ść èìàòć äâóáóòîííà ìèűêà è ùć âêëțśè\n"
+"ńèìóëèđàíć íà òđè áóòîíà. DrakX àâòîìàòèśíî đàçáèđà äàëè ć PS/2, ńćđèéíà "
+"èëè\n"
+"USB ìèűêà.\n"
+"\n"
+"Àêî èńêàòć äà îïđćäćëèòć äđóă òèï íà ìèűêàòà, èçáćđćòć ïîäőîäÿù îò ńïèńúêà,\n"
+"êîéòî ùć âè áúäć ïđćäńòàâćí.\n"
+"\n"
+"Àêî èçáćđćòć ìèűêà đàçëèśíà îò òàçè ïî ïîäđàçáèđàíć, ùć âè áúäć ïđćäîńòàâćí\n"
+"ćêđàí çà ïđîáà. Èçïîëçâàéòć áóòîíèòć è êîëćëöćòî, çà äà ïđîâćđèòć, ść\n"
+"íàńòđîéêàòà ć äîđà. Àêî ìèűêàòà íć đàáîòè, êàêòî òđÿáâà, íàòèńíćòć èíòćđâàë\n"
+"èëè ŃĆ ÂÚĐÍĆÒĆ êúì \"Îòêàç\" è èçáćđćòć ïàê."
+
+#: ../../services.pm:1
#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Íćóńïćűíî đàçäćëÿíć íà: %s"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "Ïîääđúæêà íà OKI 4w è ńúâìćńòèìè win-ïđèíòćđè."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Ïîìîùíèêúò çà đàçäćëèíć íà äÿëîâć íà DrakX íàìćđè ńëćäíèòć đćűćíèÿ:"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr "Ïóńíè ALSA (Advanced Linux Sound Architecture) çâóêîâàòà ńèńòćìà"
-#: ../../install_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "I can't find any room for installing"
-msgstr "Íć ìîăà äà íàìćđÿ íèêàêâî ìÿńòî çà èíńòàëàöèÿ"
+msgid "Installing driver for %s card %s"
+msgstr "Èíńòàëèđàíć íà äđàéâćđ çà %s ïëàòêà %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
msgstr ""
-"Ńćăà ìîæćòć äà đàçäćëèòć %s.\n"
-"Êîăàòî ńòć ăîòîâè, íć çàáđàâÿéòć äà çàïèűćòć èçïîëçâàéêè `w'"
+"Ïđćőâúđëèëè ńòć ïđèíòćđ ïî ïîäđàçáèđàíć (\"%s\"), Èńêàòć ëè äà ăî îńòàâèòć "
+"ïî ïîäđàçáèđàíć â íîâàòà ïđèíòćđíà ńèńòćìà %s ?"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Use fdisk"
-msgstr "Èçïîëçâàé fdisk"
+msgid "Enable Server"
+msgstr "Âêëțśâà Ńúđâúđ"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Custom disk partitioning"
-msgstr "Êëèćíòńêî đàçäćëÿíć íà äèńêà"
+msgid "Ukrainian"
+msgstr "Óêđàèíńêà"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "ÂŃÈŚÊÈ ńúùćńòâóâàùè äÿëîâć è äàííèòe âúđőó òÿő íà %s ùć áúäàò çàăóáćíè"
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
+msgstr ""
+"Íÿìàűć äîńòúï äî ìđćæàòà è òàêúâ íć ìîæćűć äà áúäć óńòàíîâćí. Ìîëÿ, "
+"ïđîâćđćòć íàńòđîéêàòà è őàđäóćđà ńè. Òîăàâà îïèòàéòć äà íàńòđîèòć "
+"îòäàëćśćíèÿ ïđèíòćđ îòíîâî."
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "èìàòć ïîâćść îò ćäèí òâúđäè äèńêîâć, êîé äà èçïîëçâàì çà èíńòàëàöèÿòà?"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "Ńëîæćòć ńòàđòèđàùàòà äèńêćòà â óńòđîéńòâî %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Erase entire disk"
-msgstr "Èçòđèé öćëèÿ äèńê"
+msgid "Local network(s)"
+msgstr "Ëîêàëíà ìđćæà(è)"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Remove Windows(TM)"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
msgstr "Ïđćìàőíè Windows(TM)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr "Íÿìà FAT äÿëîâć çà ńìÿíà íà ăîëćìèíàòà (èëè íÿìà äîńòàúśíî ìÿńòî)"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr ""
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Firewire controllers"
+msgstr "USB êîíòđîëćđè"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
+"\n"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
msgstr ""
+"LILO (èëè LInux LOader) è Grub ńà bootloader-è: òć ìîăà äà ńòàđòèđàò\n"
+"GNU/Linux èëè êîÿ äà ć äđóăà îïćđàöèîííà ńèńòćìà ńúùćńòâóâàùà íà êîìïțòúđà "
+"âè.\n"
+"Îáèêíîâćííî, òćçè äđóăè îïćđàöèîííè ńèńòćìà ńć çàńèśàò è èíńòàëèđàò\n"
+"ïđàâèëíî. Àêî òîâà íć ńòàâà ïđè âàń, ìîæćòć äà äîáàâÿòć çàïèńè íà đúêà â\n"
+"òîçè ćêđàí. Ăëćäàéòć äà èçáćđćòć âćđíè ïàđàìćòđè.\n"
+"\n"
+"\n"
+"Ìîæć äà íć èńêàòć äà äàâàòć äîńòúï äî òćçè îïćđàöèîííè ńèńòćìè íà íèêîé,\n"
+"â êîéòî ńëóśàé ìîæćòć äà èçòđèćòć ńúîòâćòíèòć çàïèńè. Íî â òàêúâ ńëóśàé,\n"
+"ùć ńć íóæäàćòć îò boot-äèńêćòà, çà äà ăè ńòàđòèđàòć !"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Íćóńïćűíî ïđćđàçäćëÿíć íà FAT: %s"
+msgid "System mode"
+msgstr "Ńèńòćìćí đćæèì"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Resizing Windows partition"
-msgstr "Èçśèńëÿâàì ăđàíèöèòć íà Windows ôàéëîâàòà ńèńòćìà"
+msgid ""
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
+msgstr ""
+"Çà äà ïćśàòèòć íà NetWare ïđèíòćđ ,òđÿáâà äà çíàćòć èìćî ìó è âúçìîæíî\n"
+"àäđćńà íà ńúđâúđà, êàêòî è èìćòî íà îïàűêàòà,ïîòđćáèòćëńêîòî èìć,ïàđîëà. "
+"(çàáćëćæêà! òîé ìîæć äà ć đàçëèśćí îò TCP/IP èìć íà őîńò!)"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Resizing"
-msgstr "Ïđîìÿíà íà ăîëćìèíàòà"
+msgid "Netmask:"
+msgstr "Ìđćæîâà ìàńêà:"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "partition %s"
-msgstr "äÿë %s"
+msgid "Append"
+msgstr "Äîïúëâàíć"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Êîëêî èńêàòć äà îńòàâèòć çà windows?"
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"WARNING!\n"
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
+"\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
+"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
+"\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
msgstr ""
-"ÂÍÈÌÀÍÈĆ!\n"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid ""
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
-"DrakX òđÿáâà äà ïđćđàçäćëè Âàűèÿ Windows äÿë. Áúäćòć âíèìàòćëíè: òàçè "
-"îïćđàöèÿ ć\n"
-"îïàńíà. Àêî îùć íć ńòć ăî íàïđàâèëè, òđÿáâà ïúđâî äà ïóńíćòć scandisk (è\n"
-"ćâćíòóàëíî äà èçïîëçâàòć defrag) ïîä Windows âúđőó òîçè äÿë, òîăàâà \n"
-"ïîâòîđćòć èíńòàëàöèàÿòà. Áè áèëî äîáđć äà íàïđàâèòć àđőèâ íà äàííèòć ńè.\n"
-"Êîăàòî ńòć ńèăóđíè, íàòèńíćòć ÎÊ."
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
+"\n"
+"It also provides a much higher API than OSS.\n"
+"\n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
+"\n"
+"You may prefer to replay the installation.\n"
msgstr ""
-"Âàűèÿò Windows äÿë ć ìíîăî ôđàăìćíòèđàí, ìîëÿ ïúđâî ńòàđòèđàéòć ''defrag''"
+"Àâòîìàòèśíàòà èíńòàëàöèÿ ìîæć äà áúäć íàïúëíî àâòîìàòèçèđàíà,\n"
+"â òàêúâ ńëóśàé ùć ïđćâçćìć òâúđäèÿ âè äèńê !!!\n"
+"(òîâà ć çà ïđćäíàçíàśćíî çà èíńòàëèđàíć íà äđóăà ìàűèíà).\n"
+"\n"
+"Ìîæć áè èńêàòć äà ïîâòîđèòć èíńòàëàöèÿòà.\n"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Èçśèńëÿâà ńâîáîäíîòî ìÿńòî íà Windows äÿë"
+msgid "Network printer \"%s\", port %s"
+msgstr "Ìđćæîâ ïđèíòćđ \"%s\", ïîđò %s"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
msgstr ""
-"Íć âúçìîæíîńò çà đàáîòà ń âàűèÿ FAT äÿë, \n"
-"ïîđàäè ïîëóśćíàòà ăđćűêà: %s"
+"Ìîëÿ èçáćđćòć êîé ìđćæîâ àäàïòćđ äà áúäć âêëțśćí êúì ëîêàëíàòà âè ìđćæà."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Êîé äÿë æćëàćòć äà ïđîìćíèòć?"
+msgid "OK to restore the other files."
+msgstr "OK çà âúçńòàíîâÿâàíć íà äđóăè ôàéëîâć."
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Èçïîëçâàé ńâîáîäíîòî ìÿńòî íà Windows äÿëà"
+msgid "Please choose your keyboard layout."
+msgstr "Ìîëÿ, èçáćđćòć ïîäđćæäàíć íà êëàâèàòóđàòà."
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"Íÿìà FAT äÿëîâć çà èçïîëçâàíć êàòî loopback (èëè íÿìà äîńòàòúśíî ìÿńòî íà "
-"äèńêà)"
+msgid "Printer Device URI"
+msgstr "Ïćśàòàùî óńòđîéńòâî URI"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Ăîëćìèíà íà swap-äÿëà â MB: "
+msgid "Not erasable media!"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Root partition size in MB: "
-msgstr "Ăîëćìèíà íà root-äÿëà â MB: "
+msgid "Terminal-based"
+msgstr "Áàçèđàíà íà òćđìèíàë"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the sizes"
-msgstr "Èçáćđćòć ăîëćìèíèòć"
+msgid "Installing a printing system in the %s security level"
+msgstr "Èíńòàëèđàíć íà ïđèíòćđíàòà ńèńòćìà â %s íèâî íà ńèăóđíîńò"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Êîé äÿë èńêàòć äà èçïîëçâàòć çà Linux4Win ?"
+msgid "The user name is too long"
+msgstr "Òîâà èìć ć òâúđäć äúëăî"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Èçïîëçâàé çà Windows äÿëúò çà loopback"
+msgid "Other OS (windows...)"
+msgstr "Äđóăà ÎŃ (Windows...)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "There is no existing partition to use"
-msgstr "Íÿìà äÿë, êîéòî ìîăà äà èçïîëçâàì"
+msgid "WebDAV remote site already in sync!"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use existing partitions"
-msgstr "Èçïîçâàíć íà ńúùćńòâóâàù äÿë"
+msgid "Reading printer database..."
+msgstr "Śćòćíć íà áàçàòà äàííè îò ïđèíòćđè ..."
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Íÿìà äîńòàòúśíî ìÿńòî çà ńúçäàâàíć íà íîâ äÿë"
+msgid "Generate auto install floppy"
+msgstr "Ïîäăîòâè äèńêćòà çà àâòîìàòèśíà èíńòàëàöèÿ"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use free space"
-msgstr "Èçïîëçâàé ńâîáîäíîòî ìÿńòî"
+msgid ""
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
+msgstr ""
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Òđÿáâà äà èìàòć FAT äÿë ìîíòèđàí â /boot/efi"
+msgid "Somalia"
+msgstr "Ńîìàëèÿ"
-#: ../../install_interactive.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"You don't have a swap partition.\n"
-"\n"
-"Continue anyway?"
+msgid "No open source driver"
msgstr ""
-"Íÿìàòć swap-äÿë\n"
-"\n"
-"Äà ïđîäúëæà ëè âńć ïàê ?"
-#: ../../install_interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
msgstr ""
-"Òđÿáâà äà èìàòć root-äÿë.\n"
-"Çàòîâà ńúçäàéòć äÿë (èëè öúêíćòć íà ńúùćńòâóâàù).\n"
-"Òîăàâà èçáćđćòć äćéńòâèć ``Ìÿńòî íà ìîíòèđàíć'' è ăî ńëîæćòć `/'"
+"Ïîäîáíî íà ïđćäèűíîòî íèâî, íî ńèńòćìàòà ć íàïúëíî çàòâîđćíà.\n"
+"Íèâîòî íà ńèăóđíîńò ć íà ìàêńèìóìà ńè."
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Śàńò îò őàđäóćđà íà êîìïțòúđà âè ńć íóæäàć îò ``ńîáńòâćíèòć ńè'' äđàéâćđè, "
-"çà äà đàáîòè.\n"
-"Ìîæćòć äà íàìćđèòć ïîâćść èíôîđìàöèÿ çà òîâà íà: %s"
+msgid "Nicaragua"
+msgstr "Íèêàđàăóà"
-#: ../../install_messages.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Ïîçäđàâëćíèÿ, èíńòàëàöèÿòà ć ïđćêëțśćíà.\n"
-"Ïđćìàőíćòć ńòàđòîâîòî óńòđîéńòâî è íàòèńćíć Enter çà äà đćńòàđòèđàéòć.\n"
-"\n"
-"\n"
-"Çà èíôîđìàöèÿ îòíîńíî ïîïđàâêè, íà òàçè âćđńèÿ íà Mandrake Linux,\n"
-"ńć êîíńóëòèđàéòć ń Errata, íà àäđćń : \n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Èíôîđìàöèÿ çà íàńòđîéâàíć íà ńèńòćìàòà âè ìîæćòć äà íàìćđèòć â\n"
-"ńëćäèíńòàëàöèîííàòà ăëàâà îò Official Mandrake Linux User's Guide."
+msgid "New Caledonia"
+msgstr "Íîâà Êàëćäîíèÿ"
-#: ../../install_messages.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr "http://www.mandrakelinux.com/en/91errata.php3"
+msgid "European protocol (EDSS1)"
+msgstr "Ïđîòîêîë Ćâđîïà (EDSS1)"
-#: ../../install_messages.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Âíèìàíèć\n"
-"\n"
-"Ìîëÿ, ïđîśćòćòć óńëîâèÿòà ïî-äîëó. Àêî íć ńòć ńúăëàńíè ń íÿêîć îò òÿő,\n"
-"íć ìîæćòć äà ïđîäúëæèòć èíńòàëàöèÿòà íà ńëćäâàùèÿ CD íîńèòćë. Íàòèńíćòć\n"
-"'Îòêàæè', çà äà ïđîäúëæèòć èíńòàëàöèÿòà áćç òćçè íîńèòćëè.\n"
-"\n"
-"\n"
-"Íÿêîè êîìïîíćíòè ńúäúđæàùè ńć â ńëćäâàùèÿ CD íîńèòćë íć ńà đàçïđîńòđàíÿâàò\n"
-"ïîä GPL Ëèöćíçà èëè ïîäîáćí òàêúâ. Âńćêè òàêúâ êîìïîíćíò ć ïîä óńëîâèÿòà\n"
-"è ïîëîæćíèÿòà íà ńïćöèôèśíèÿ ìó ëèöćíç. Ìîëÿ, ïđîśćòćòć âíèìàòćëíî è èçöÿëî\n"
-"òćçè ńïćöèôèśíè ëèöćíçè ïđćäè äà èçïîëçâàòć èëè đàçïđîńòđàíÿâàòć "
-"ńïîìćíàòèòć\n"
-"êîìïîíćíòè.\n"
-"Òàêèâà ëèöćíçè ïî ïđèíöèï ïđćäîòâđàòÿâà ïđćíîńà, êîïèđàíćòî (îńâćí ń öćë\n"
-"ńúőđàíćíèć), đàçïđîńòđàíÿâàíćòî, îáđàòíèÿ èíæćíćđèíă, äćàńćìáëèđàíćòî\n"
-"äćêîìïèëàöèÿòà èëè ìîäèôèêàöèÿòà íà êîìïîíćíòèòć.\n"
-"Âńÿêî íàđóűàâàíć íà ńïîăîäáàòà íćçàáàâíî ïđćóńòàíîâÿâà ïđàâàòà âè ïî\n"
-"ńïćöèôèśíèÿ ëèöćíç. Îńâćí àêî ńïćöèôèśíèÿ ëèöćíç âè äàâà òàêèâà ïđàâà,\n"
-"îáèêíîâćíî íć ìîæćòć äà èíńòàëèđàòć ïđîăđàìèòć íà ïîâćść îò ćäíà ńèńòćìà\n"
-"èëè äà ăè ïđèăàæäàòć çà èçïîëçâàíć â ìđćæà. Àêî íć ńòć ńèăóđíè, ìîëÿ\n"
-"ńâúđæćòć ńć ń äèńòđèáóöèÿ èëè đćäàêòîđà íà êîìïîíćíà.\n"
-"Ïđćőâúđëÿíćòî íà òđćòè ëèöà èëè êîïèđàíćòî íà âńÿêà êîìïîíćíòà, âêëțśèòćëíî\n"
-"íà äîêóìćíòàöèÿòà, îáèêíîâćíî ńà çàáđàíćíè.\n"
-"\n"
-"\n"
-"Âńèśêè ïđàâà íà êîìïîíćíòèòć îò ńëćäâàùèÿ CD íîńèòćë ïđèíàäëćæàò íà\n"
-"ńúîòâćòíèòć èì àâòîđè è ńà çàùèòćíè êàòî èíòćëćêòóàëíà ńîáńòâćíîńò îò\n"
-"çàêîíèòć çà àâòîđńêè ïđàâà ïđèëîæèìè çà ńîôòóćđíèòć ïđîăđàìè.\n"
+msgid "Video mode"
+msgstr "Âèäćî đćæèì"
-#: ../../install_messages.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-msgstr ""
-"Âúâćäćòíèć\n"
-"\n"
-"Îïćđàöèîííàòà ńèńòćìà è đàçëèśíèòć êîìïîíćíòè äîńòúïíè â Mandrake Linux "
-"äèńòđèáóöèÿòà ïî-äîëó ùć ńć\n"
-"íàđèśàò \"Ńîôòóćđćí Ïđîäóêòè\". Ńîôòóćđíèòć Ïđîäóêòè âêëțśâàò, íî íć ńć "
-"îăđàíèśàâàò ńàìî äî, íàáîđà\n"
-"ïđîăđàìè, ìćòîäè, ïđàâèëà è äîêóìćíòàöèÿ îòíàńÿùà ńć äî îïćđàöèîííàòà "
-"ńèńòćìà è đàçëèśíèòć\n"
-"êîìïîíćíòè íà Mandrake Linux äèńòđèáóöèÿòà.\n"
-"\n"
-"\n"
-"1. Ëèöćíçèîíćí äîăîâîđ\n"
-"\n"
-"Ìîëÿ, ïđîśćòćòć âíèìàòćëíî òîçè äîêóìćíò. Òîçè äîêóìćíò ć ëèöćíçèîíćí "
-"äîăîâîđ ìćæäó âàń è\n"
-"MandrakeSoft S.A., êîéòî ńć îòíàńÿ äî Ńîôòóćđíèÿ Ïđîäóêò. Śđćç "
-"èíńòàëèđàíćòî, êîïèđàíćòî\n"
-"èëè èçïîëçâàíćòî íà Ńîôòóćđíèÿ Ïđîäóêò ïî êàêúâòî è äà ć íàśèí âèć èçđèśíî "
-"ïđèćìàòć è\n"
-"íàïúëíî ńć ńúăëàńÿâàòć äà ńïàçâàòć ńđîêîâćòć è óńëîâèÿòà íà òîçè Ëèöćíç.\n"
-"Àêî íć ńć ńúăëàńÿâàòć ń íÿêîÿ śàńò íà Ëèöćíçà, íÿìàòć ïđàâî äà èíńòàëèđàòć, "
-"êîïèđàòć èëè\n"
-"èçïîëçâàòć Ńîôòóćđíèÿ Ïđîäóêò. Îïèòèòć äà ńć èíńòàëèđà, êîïèđà èëè èçïîëçâà "
-"Ńîôòóćđíèÿ Ïđîäóêò\n"
-"íćńúîáđàçíî ńúń ńđîêîâćòć è óńëîâèÿòà íà òîçè Ëèöćíç ńć çàáđàíÿâàò è òàêèâà "
-"ïđćêđàòÿâàò ïđàâàòà\n"
-"âè ïî òîçè Ëèöćíç. Ïđè ïđćêđàòÿâàíć íà Ëèöćíçà, òđÿáâà íćçàáàâíî äà "
-"óíèæòîæèòć âńèśêè\n"
-"êîïèÿ íà Ńîôòóćđíèÿ ëèöćíç.\n"
-"\n"
-"\n"
-"2. Îăđàíèśćíà ăàđàíöèÿ\n"
-"\n"
-"Ńîôòóćđíèòć Ïđîäóêòè è ïđèëîæćíàòà äîêóìćíòàöèÿ ńć ïđćäîńòàâÿòà \"òàêèâà "
-"êàêâèòî ńà\", áćç ăàđàíöèÿ,\n"
-"â đàìêèòć íà đàçđćűćíîòî îò çàêîíà.\n"
-"MandrakeSoft S.A., ïđè íèêàêâè îáńòîÿòćëńòâà è â đàìêèòć íà çàêîíà, íć ć "
-"îòăîâîđíà çà êàêâèòî äà e\n"
-"óìèűëćíè, ńëóśàéíè, ïđćêè èëè êîńòâćíè ùćòè (âêëțśèòćëíî çàăóáà íà äàííè çà "
-"đàáîòà, ïđćêđàòÿâàíć íà,\n"
-"đàáîòà, ôèíàíńîâè çàăóáè, çàêîííè äàíúöè è íàêàçàíèÿ â đćçóëòàò íà ńúäćáíî "
-"đćűćíèć èëè êàêâàòî è äà ć\n"
-"äđóăà ïđîèçëèçàùè îò òîâà çàăóáè) ïđîèçòèśàùè îò óïîòđćáàòà èëè îò "
-"íćâúçìîæíîńòòà äà ńć óïîòđćáè\n"
-"Ńîôòóćđíèÿ Ïđîäóêò, äàæć àêî MandrakeSoft S.A. äà ć èçâćńòèëà çà "
-"âúçìîæíîńòòà èëè ńëóśâàíćòî íà òàêàâà çàăóáà.\n"
-"\n"
-"ÎĂĐÀÍÈŚĆÍÀ ÎÒĂÎÂÎĐÍÎŃÒ ŃÂÚĐÇÀÍÀ Ń ÏĐÈÒĆÆÀÂÀÍĆÒÎ ÈËÈ ÈÇÏÎËÇÂÀÍĆÒÎ ÍÀ ÇÀÁĐÀÍĆÍ "
-"ŃÎÔÒÓĆĐ Â ÍßÊÎÈ ŃÒĐÀÍÈ\n"
-"\n"
-"Â đàìêèòć íà çàêîíà, MandrakeSoft S.A. è íćéíèòć äèńòđèáóòîđè íÿìà ïđè "
-"íèêàêâè óńëîâèÿ äà áúäàò\n"
-"îòăîâîđíè çà êàêâèòî è äà áèëî óìèűëćíè, ńëóśàéíè, ïđćêè èëè êîńâćíè ùćòè "
-"(âêëțśèòćëíî çàăóáà íà äàííè\n"
-"çà đàáîòà, ïđćêđàòÿâàíć íà, đàáîòà, ôèíàíńîâè çàăóáè, çàêîííè äàíúöè è "
-"íàêàçàíèÿ â đćçóëòàò íà\n"
-"ńúäćáíî đćűćíèć èëè êàêâàòî è äà ć äđóăà ïđîèçëèçàùè îò òîâà çàăóáè) "
-"ïđîèçòèśàùè îò ïđèòćæàâàíćòî\n"
-"è óïîòđćáàòà íà ńîôòóćđíè êîìïîíćíòè è îò èçòćăëÿíćòî íà ńîôòóćđíè "
-"êîìïîíćíòè îò ńàéòîâćòć íà Mandrake Linux,\n"
-"êîèòî ńà çàáđàíćíè â íÿêîè ńòđàíè îò ìćńòíîòî çàêîíîäàòćëńòâî.\n"
-"Òàçè îăđàíèśćíà îòăîâîđíîńò ńć îòíàńÿ äî, íî íć ńàìî çà, ìîùíèòć "
-"êđèïòîăđàôńêè êîìïîíćíòè âêëțśćíè\n"
-"â Ńîôòóćđíèÿ Ïđîäóêò.\n"
-"\n"
-"\n"
-"3. GPL Ëèöćíçà è ïđèäđóæàâàùè ëèöćíçè\n"
-"\n"
-"Ńîôòóćđíèÿò Ïđîäóêò ńć ńúńòîè îò êîìïîíćíòè ńúçäàäćíè îò đàçëèśíè őîđà èëè "
-"îđăàíèçàöèè. Ïîâćśćòî îò\n"
-"òćçè êîìïîíćíòè ńć óïđàâëÿâàò îò ńđîêîâćòć è óńëîâèÿòà íà GNU Îáùèÿ Ïóáëèśćí "
-"Ëèöćíç, îòòóê íàòàòúê íàđèśàí\n"
-"\"GPL\", èëè ïîäîáíè íćìó ëèöćíçè. Ïîâćśćòî îò òćçè ëèöćíçè âè ïîçâîëÿâàò äà "
-"èçïîëçâàòć, êîïèđàòć, èëè\n"
-"đćäèńòđèáóòèđàòć êîìïîíćíòèòć, êîèòî òć ïîêđèâàò. Ìîëÿ, ïđîśćòćòć âíèìàòćëíî "
-"ńđîêîâćòć è óńëîâèÿòà íà\n"
-"ëèöćíçèîííèÿ äîăîâîđ íà âńćêè êîìïîíćíò ïđćäè äà ăî èçïîëçâàòć. Âńÿêàêâè "
-"âúïđîńè îòíîńíî ëèöćíçà\n"
-"íà êîìïîíćíòèòć áè òđÿáâàëî äà áúäàò íàńîśćíè êúì ńúîòâćòíèÿ èì àâòîđ, à íć "
-"êúì MandrakeSoft.\n"
-"Ïđîăđàìèòć đàçđàáîòćíè îò MandrakeSoft S.A. ńć óïđàâëÿâàò îò GPL Ëèöćíçà. "
-"Äîêóìćíòàöèÿòà íàïèńàíà\n"
-"îò MandrakeSoft S.A. ńć óïđàâëÿâà îò ńïćöèàëćí ëèöćíç. Ìîëÿ, ïîăëćäíćòć "
-"äîêóìćíòàöèÿòà çà\n"
-"ïîâćść èíôîđìàöèÿ.\n"
-"\n"
-"\n"
-"4. Ïđàâà çà Èíòćëćêòóàëíà Ńîáńòâćíîńò\n"
-"\n"
-"Âńèśêè ïđàâà êúì êîìïîíćíòèòć íà Ńîôòóćđíèÿ Ïđîäóêò ïđèíàäëćæàò íà "
-"ńúîòâćòíèòć èì àâòîđè è ńà\n"
-"çàùèòćíè îò çàêîíèòć çà èíòćëćêòóàëíàòà ńîáńòâćíîńò è çà êîïèđàíć ïđèëàăàíè "
-"çà ńîôòóćđíèòć ïđîăđàìè.\n"
-"MandrakeSoft S.A. çàïàçâà ïđàâîòî ńè äà ìîäèôèöèđà è ïđèăîäÿâà Ńîôòóćđíèÿ "
-"Ïđîäóêò, êàòî öÿëî èëè íà\n"
-"śàńòè, ïî âńÿêàêúâ íàśèì î ń âńÿêàêâè öćëè.\n"
-"\"Mandrake\", \"Mandrake Linux\" è ńâúđçàíèòć ëîăîòà ńà çàïàçćíà ìàđêà íà "
-"MandrakeSoft S.A.\n"
-"\n"
-"\n"
-"5. Óïđàâëÿâàùè Çàêîíè\n"
-"\n"
-"Àêî íÿêîÿ śàńò îò òîçè äîăîâîđ ńć âîäè çàáđàíćíà, íćëćăàëíà èëè íćïđèëîæèìà "
-"ńïîđćä đćűćíèć íà ńúä,\n"
-"òàçè śàńò ńć èçêëțśâà îò äîăîâîđà. Âèć îńòàâàòć îăđàíèśćíè îò îńòàíàëèòć "
-"ïđèëîæèìè ńćêöèè íà äîăîâîđà.\n"
-"Ńđîêîâćòć è óńëîâèÿòà íà òîçè Ëèöćíç ńć óïđàâëÿâàò îò Çàêîíèòć íà Ôđàíöèÿ.\n"
-"Âńèśêè ńïîđîâć ïî óńëîâèÿòà íà òîçè ëèöćç áè áèëî äîáđć äà ńć îòíćńàò äî "
-"ńúäà. Êàòî êđàéíà ìÿđêà,\n"
-"ńïîđîâćòć ùć áúäàò îòíàńÿíè äî ïîäőîäÿùèÿ ïđàâíè ńúäèëèùà íà Ïàđèæ - "
-"Ôđàíöèÿ.\n"
-"Çà âńÿêàêâè âúïđîńè ïî òîçè äîêóìćíò, ìîëÿ, ńâúđæćòć ńć ń MandrakeSoft S.A.\n"
-"\n"
-"ÇÀÁĆËĆÆÊÀ: Òîâà ć áúëăàđńêè ïđèáëèçèòćëćí ïđćâîä íà äîêóìćíòà, êîćòî "
-"îçíàśàâà, ść òîé\n"
-"âćđîÿòíî íć ć äîńòàòúśíî òîśćí. Êàòî ïî-äîńòîâćđćí èçòîśíèê ïîëçâàéòć "
-"íćăîâèÿ îđèăèíàë íà\n"
-"àíăëèéńêè.\n"
+msgid "Please enter your email address below "
+msgstr "Ìîëÿ, âúâćäćòć äîëó âàűèÿò àäđćń íà Ćë. ïîùà"
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Íàâëèçàì â ćòàï `%s'\n"
+msgid "Oman"
+msgstr "Îìàí"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Help"
-msgstr "Ïîìîù"
+msgid "Network Monitoring"
+msgstr "Ìîíèòîđèíă íà ìđćæàòà"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "not configured"
-msgstr "íć ć êîíôèăóđèđàí"
+msgid "SunOS"
+msgstr "SunOS"
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configure"
-msgstr "Íàńòđîêà"
+msgid "New size in MB: "
+msgstr "Íîâà ăîëćìèíà â MB: "
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Go on anyway?"
-msgstr "Äà ïđîäúëæà ëè âńć ïàê ?"
+msgid "Partition table type: %s\n"
+msgstr "Òèï íà òàáëèöàòà ń äÿëîâć: %s\n"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "There was an error installing packages:"
-msgstr "Ïîÿâè ńć ăđćűêà ïđè èíńòàëèđàíć íà ïàêćòèòć:"
+msgid "Authentication Windows Domain"
+msgstr "Èäćíòèôèêàöèÿ íà Windows Äîìćéí"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Ïîÿâè ńć ăđćűêà ïđè ïîđúśâàíćòî íà ïàêćòèòć:"
+msgid "US keyboard"
+msgstr "US êëàâèàòóđà"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Buttons emulation"
+msgstr "Èìèòàöèÿ íà áóòîíè"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ", network printer \"%s\", port %s"
+msgstr ", ìđćæîâè ïđèíòćđ \"%s\", ïîđò %s"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Change your Cd-Rom!\n"
"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
+"Drakbackup activities via tape:\n"
+"\n"
msgstr ""
-"Ńìćíćòć CD-ROM !\n"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
"\n"
-"Ìîëÿ, ńëîæćòć CD-ROM îçàăëàâćí \"%s\" â óńòđîéńòâîòî è íàòèńíćòć Ok, êîăàòî "
-"ńòć ăîòîâè.\n"
-"Àêî ăî íÿìàòć, íàòèńíćòć Îòìÿíà, çà äà èçáćăíćòć èíńòàëèđàíćòî îò òîçè CD-"
-"ROM."
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Refuse"
-msgstr "Îòêàæè"
+msgid "Sending Speed:"
+msgstr "Ńêîđîńò íà èçïđàùàíć:"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Accept"
-msgstr "Ïđèćìè"
+msgid "Halt bug"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Installing package %s"
-msgstr "Èíńòàëèđàíć íà ïàêćòà %s"
+msgid "Mail alert configuration"
+msgstr "Êîíôèăóđàöèÿ çà ïîäđćäáà íà ïîùà"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "%d packages"
-msgstr "%d ïàêćòà"
+msgid "Tokelau"
+msgstr "Òîêćëàó"
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Bosnian"
+msgstr "Áîńíćíńêà"
+
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "No details"
-msgstr "Ïîäđîáíîńòè"
+msgid "Release: "
+msgstr "Ìîëÿ èçśàêàéòć"
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Details"
-msgstr "Ïîäđîáíîńòè"
+msgid "Connection speed"
+msgstr "Ńêîđîńò íà âđúçêàòà"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Ìîëÿ, èçśàêàéòć, ïîäăîòâÿíć íà èíńòàëàöèÿòà"
+msgid ""
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Time remaining "
-msgstr "Îńòàâàùî âđćìć "
+msgid "Namibia"
+msgstr "Íàìèáèÿ"
-#: ../../install_steps_gtk.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Estimating"
-msgstr "Ïđćńìÿòàíć"
+msgid "Database Server"
+msgstr "Ńúđâúđ Áàçè-äàííè"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Installing"
-msgstr "Èíńòàëèđàì"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Èçáćđćòć ïàêćòèòć, êîèòî èńêàòć äà èíńòàëèđàòć"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "Íć ìîăà äà ïđèáàâÿ äÿë êúì _ôîđìàòèđàí_ RAID md%d"
-#: ../../install_steps_gtk.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Minimal install"
-msgstr "Ìèìèíàëíà èíńòàëàöèÿ"
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
+msgstr ""
+"Êàđòàòà âè ìîæć äà èìà ïîääđúæêà íà őàđäóćđíî 3D óńêîđćíèć, íî ńàìî ń XFree %"
+"s,\n"
+"ÎÒÁĆËĆÆĆÒĆ, ŚĆ ÒÎÂÀ Ć ĆÊŃÏĆĐÈÌĆÍÒÀËÍÀ ÏÎÄÄĐÚÆÊÀ È ÌÎÆĆ ÄÀ ÇÀÁÈĆ ÊÎÌÏȚÒÚĐÀ "
+"ÂÈ.\n"
+"Êàđòàòà âè ńć ïîääúđæà îò XFree %s, êîéòî ìîæć äà èìà ïî-äîáđà ïîääđúæêà íà "
+"2D."
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Updating package selection"
-msgstr "Îáíîâÿâàíć íà èçáîđà íà ïàêćòè"
+msgid "Please wait, setting security options..."
+msgstr "Ìîëÿ, èçśàêàéòć, óńòàíîâÿâàì îïöèèòć ïî çàùèòà..."
-#: ../../install_steps_gtk.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Load/Save on floppy"
-msgstr "Çàđćäè/Çàïàçè íà äèńêćòà"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr "Íćèçâćńòćí|CPH05X (bt878) [ìíîăî ïđîèçâîäèòćëè]"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "<- Previous"
-msgstr "<- Ïđćäèűćí"
+msgid "Launch the graphical environment when your system starts"
+msgstr "Ïóńíè X-Window ńèńòćìàòà ïđè ńòàđòèđàíć"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Install"
-msgstr "Èíńòàëèđàé"
+msgid "hourly"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Show automatically selected packages"
-msgstr "Ïîêàæè àâòîìàòèśíî îòáćëÿçàíèòć ïàêćòè"
+msgid " Successfuly Restored on %s "
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Íć ìîæćòć äà èçêëțśèòć òîçè ïàêćò. Òîé òđÿáâà äà áúäć îáíîâćí"
+msgid "Making printer port available for CUPS..."
+msgstr "Ïđàâè ïîđòà íà ïđèíòćđà íàëèśćí çà CUPS..."
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Antigua and Barbuda"
+msgstr "Àíòèăóà è Áàđáóäà"
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""
-"Òîçè ïàêćò òđÿáâà äà áúäć îáíîâćí\n"
-"Ńèăóđíè ëè ńòć, ść èńêàòć äà ăî èçêëțśèòć ?"
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "Íć ìîæćòć äà îńòàâèòć òîçè ïàêćò íćìàđêèđàí. Òîé âćść ć èíńòàëèđàí"
+msgid "Spanish"
+msgstr "Èńïàíńêà"
-#: ../../install_steps_gtk.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Òîâà ć íóæćí ïàêćò, íć ìîæć äà áúäć íćìàđêèđàí"
+msgid "Start"
+msgstr "Ńòàđò"
-#: ../../install_steps_gtk.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "You can't select/unselect this package"
-msgstr "Íć ìîæćòć äà îòáćëćæćòć/äćîòáćëćæćòć òîçè ïàêćò"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The following packages are going to be removed"
-msgstr "Ńëćäíèòć ïàêćòè ùć áúäàò ïđćìàőíàòè"
+msgid "Configuring applications..."
+msgstr "Íàńòđîéêà íà ïđèëîæćíèÿ..."
-#: ../../install_steps_gtk.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "The following packages are going to be installed"
-msgstr "Ńëćäíèòć ïàêćòè ùć áúäàò èíńòàëèđàíè"
+msgid "Normal modem connection"
+msgstr "Îáèêíîâćíà ìîäćìíà âđúçêà"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#, c-format
+msgid "File Selection"
+msgstr "Èçáîđ íà ôàéë"
+
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"You can't select this package as there is not enough space left to install it"
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+" tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+" standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
msgstr ""
-"Íć ìîæćòć äà îńòàâèòć ïàêćòà íćìàđêèđàí, çàùîòî íÿìàòć ìÿńòî äà ăî "
-"èíńòàëèđàòć"
+"Êîÿ ISDN íàńòđîéêà ïđćäïîśèòàòć ?\n"
+"\n"
+"* Ńòàđàòà íàńòđîéêà èçïîëçâà isdn4net. Ńúäúđæà ìîùíè èíńòđóìćíòè\n"
+" íî ć êàïđèçíà çà íàńòđîéêà è íć ć ńòàíäàđòíà.\n"
+"\n"
+"* Íîâàòà íàńòđîéêà ć ïî-ëćńíà çà đàçáèđàíć, ïî ńòàíäàđòíà,\n"
+" íî ń ïî-ìàëêî èíńòđóìćíòè.\n"
+"\n"
+"Ïđćïîđúśâàìć âè îëćêîòćíàòà íàńòđîéêà.\n"
-#: ../../install_steps_gtk.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
-msgid "Importance: %s\n"
-msgstr "Âàæíîńò: %s\n"
+msgid "CUPS"
+msgstr "CUPS"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Size: %d KB\n"
-msgstr "Ăîëćìèíà: %d KB\n"
+msgid "Run config tool"
+msgstr "Èçïúëíÿâà èíńòđóìćíò çà êîíôèăóđèđàíć"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Version: %s\n"
-msgstr "Âćđńèÿ: %s\n"
+msgid "Bootloader installation"
+msgstr "Èíńòàëàöèÿ íà Bootloader"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Name: %s\n"
-msgstr "Èìć: %s\n"
+msgid "Root partition size in MB: "
+msgstr "Ăîëćìèíà íà root-äÿëà â MB: "
#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Bad package"
-msgstr "Ëîű ïàêćò"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "Òîâà ć íóæćí ïàêćò, íć ìîæć äà áúäć íćìàđêèđàí"
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Other"
-msgstr "Äđóăà"
+msgid "Etherboot ISO image is %s"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Îáùà ăîëćìèíà: %d / %d MB"
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"named (BIND) ć Domain Name Server (DNS), êîéòî ńć èçïîëçâà äà ïđćâúđíć\n"
+"èìćòî íà őîńòà äî IP àäđćń."
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Next ->"
-msgstr "Ńëćäâàù ->"
+msgid "Disconnect..."
+msgstr "Îòâúđçâàíć ..."
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Individual package selection"
-msgstr "Èçáèđàíć íà ïàêćòè ćäèí ïî ćäèí"
+msgid "Saint Lucia"
+msgstr "Ńàíòà Ëóśèÿ"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Package Group Selection"
-msgstr "Èçáîđ íà ăđóïà ïàêćòè"
+msgid "Report"
+msgstr "Đàïîđò"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Âàűàòà ńèńòćìà ć ń ìàëêè đćńóđńè. Ìîæć äà èìàòć ïđîáëćìè ń èíńòàëèđàíćòî\n"
-"íà Mandrake Linux. Àêî ńć ïîÿâè ïđîáëćì îïèòàéòć ń òćêńòîâàòà èíńàëàöèÿ. "
-"Çàöćëòà,\n"
-"íàòèńíćòć 'F1', êîăàòî ńòàđòèđàòć îò CDROM è âúâćäćòć 'òćüò'."
+msgid "Palau"
+msgstr "Ïàëàó"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Save packages selection"
-msgstr "Çàïàçè èçáîđ íà ïàêćòè"
+msgid "level"
+msgstr "íèâî"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Automated"
-msgstr "Àâòîìàòèçèđàí"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Replay"
-msgstr "Ïîâòîđè"
+msgid "Package Group Selection"
+msgstr "Èçáîđ íà ăđóïà ïàêćòè"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
+msgid "Restore Via Network Protocol: %s"
msgstr ""
-"Àâòîìàòèśíàòà èíńòàëàöèÿ ìîæć äà áúäć íàïúëíî àâòîìàòèçèđàíà,\n"
-"â òàêúâ ńëóśàé ùć ïđćâçćìć òâúđäèÿ âè äèńê !!!\n"
-"(òîâà ć çà ïđćäíàçíàśćíî çà èíńòàëèđàíć íà äđóăà ìàűèíà).\n"
-"\n"
-"Ìîæć áè èńêàòć äà ïîâòîđèòć èíńòàëàöèÿòà.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Generate auto install floppy"
-msgstr "Ïîäăîòâè äèńêćòà çà àâòîìàòèśíà èíńòàëàöèÿ"
+msgid "You can configure each parameter of the module here."
+msgstr "Âèć ìîæć äà êîíôèăóđèđàòć âńćêè ïàđàìćòúđ íà ìîäóëúò òóê."
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Reboot"
-msgstr "Ïđćńòàđòèđà"
+msgid "Choose the resolution and the color depth"
+msgstr "Èçáćđćòć đàçäćëèòćëíà ńïîńîáíîńò è äúëáîśèíà íà öâćòîâćòć"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/mousedrake:1
+#, c-format
+msgid "Emulate third button?"
+msgstr "Äà ńèìóëèđàì ëè òđćòè áóòîí ?"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
msgstr ""
-"Íÿêîè ćòàïè íć ńà çàâúđűćíè.\n"
-"\n"
-"Íàèńòèíà ëè èńêàòć äà èçëćçćòć ńćăà ?"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Creating auto install floppy..."
+msgid "Mount"
+msgstr "Ìîíòèđàé"
+
+#: ../../standalone/drakautoinst:1
+#, c-format
+msgid "Creating auto install floppy"
msgstr "Ïîäăîòâÿì äèńêćòà ń àâòîìàòèśíà èíńòàëàöèÿ"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Install updates"
+msgstr "Èíńòàëèđàíć íà ńèńòćìàòà"
+
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Ńëîæćòć ïđàçíà äèńêćòà â óńòđîéńòâî %s"
+msgid "text box height"
+msgstr "âèńîśèíà íà đàìêà çà òćêńò"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Ìîæć áè ńć íóæäàćòć äà ïđîìćíèòć Open Firmware ńòàđòîâîòî óńòđîéńòâî,\n"
-" çà äà ïóńíćòć çàđćæäàùàòà ïđîăđàìà. Àêî íć âèæäàòć ïîäńêàçêàòà è ïđè\n"
-" đćńòàđòèđàíć, çàäđúæòć Command-Option-O-F ïđè đćńòàđòèđàíć è âúâćäćòć:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Ńëćä êîćòî íàïèűćòć: shut-down\n"
-"Ïđè ńëćäâàùîòî đćńòàđòèđàíć áè òđÿáâàëî äà âèäćòć ïîäńêàçêàòà."
+msgid "State"
+msgstr "Ńúńòîÿíèć"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Èíńòàëàöèÿòà íà bootloader ïđîâàëćíà. Ïîÿâè ńć ńëćäíàòà ăđćűêà:"
+msgid "Be sure a media is present for the device %s"
+msgstr "Ïđîâćđćòć èìàòć ëè äèńêćòà â óńòđîéńòâîòî %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Installing bootloader"
-msgstr "Èíńòàëèđàíć íà bootloader"
+msgid "Enable multiple profiles"
+msgstr "Âêëțśâà ìíîăî ïđîôèëè"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
+"These options can backup and restore all files in your /etc directory.\n"
msgstr ""
-"Ăđćűêà ïđè èíńòàëèđàíć íà aboot, \n"
-"äà ńć îïèòàì ëè äà ïđîäúëæà èíńòàëàöèÿòà äîđè, àêî òîâà óíèæòîæè ïúđâèÿ äÿë ?"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Do you want to use aboot?"
-msgstr "Èńêàòć ëè äà èçïîëçâàòć aboot ?"
+msgid "Local printer"
+msgstr "Ëîêàëćí ïđèíòćđ"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+msgid "Files Restored..."
msgstr ""
-"Èçăëćæäà èìàòć ńòàđîâđćìńêà èëè íćèçâćńòíà\n"
-"ìàűèíà, íà êîÿòî yaboot íÿìà äà ïđîđàáîòè.\n"
-"Èíńòàëàöèÿòà ùć ïđîäúëæè, íî ùć òđÿáâà\n"
-"äà èïîëçâàòć BootX, çà äà ńòàđòèđàòć ìàűèíàòà ńè"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Preparing bootloader..."
-msgstr "Ïîäăîòîâêà íà bootloader"
+msgid "Package selection"
+msgstr "Èçáîđ íà ïàêćòè"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Domain Admin Password"
-msgstr "Ïàđîëà çà àäìèíèńòđàòîđ íà äîìćéí"
+msgid "Mauritania"
+msgstr "Ìàâđèòàíèÿ"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Domain Admin User Name"
-msgstr "Èìć íà àäìèíèńòđàòîđ íà äîìćéí"
+msgid ""
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
+"\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
+"\n"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Windows Domain"
-msgstr "Windows äîìćéí"
+msgid ""
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
+msgstr ""
+"Íÿìà íàìćđćí ëîêàëćí ïđèíòćđ! Çà äà èíńòàëèđàòć đúśíî ïđèíòćđ, âúâćäćòć èìć "
+"íà óńòđîéńòâî/èìć íà ôàéë âúâ âőîäíîòî ïîëć (Ïàđàëćëíè ïîđòîâć /dev/lp0, /"
+"dev/lp1, ..., ńúîòâćòńâàùè íà LPT1:, LPT2:, ..., 1-âè USB ïđèíòćđ: /dev/usb/"
+"lp0, 2-đè USB ïđèíòćđ: /dev/usb/lp1, ...)."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Authentication Windows Domain"
-msgstr "Èäćíòèôèêàöèÿ íà Windows Äîìćéí"
+msgid "All primary partitions are used"
+msgstr "Âńèśêè ïúđâèśíè äÿëîâć ńć èçïîëçâàò"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
msgstr ""
+"Ńëćä êàòî ńòàíć òîâà, ïđćïîđúśâàìć âè äà đćńòàđòèđàòć X\n"
+"ńđćäàòà ńè, çà äà èçáćăíćòć ïđîáëćìè ńúń ńìÿíàòà èìćòî íà őîńòà."
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "NIS Server"
-msgstr "NIS ńúđâúđ"
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr "Àâòîìàòèśíî çàńèśàíć è íàńòđîéêà íà őàđäóćđà ïđè ńòàđòèđàíć."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "NIS Domain"
-msgstr "NIS äîìćéí"
+msgid "Installation Server Configuration"
+msgstr "Êîíôèăóđèđàíć íà Èíńòàëàöèîíćí Ńúđâúđ"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Authentication NIS"
-msgstr "NIS èäćíòèôèêàöèÿ"
+msgid "Configuring IDE"
+msgstr "Íàńòđîéêà íà IDE"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "NIS"
-msgstr "NIS"
+msgid "Network functionality not configured"
+msgstr "Ôóíêöèîíàëíîńòòà íà ìđćæàòà íć ć íàńòđîćíà"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "LDAP Server"
-msgstr "LDAP ńúđâúđ"
+msgid "Configure module"
+msgstr "Íàńòđîéêà íà ìîäóë"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LDAP Base dn"
-msgstr "LDAP Áàçîâ dn"
+msgid "Cocos (Keeling) Islands"
+msgstr "Êîêîńîâè Îńòđîâè"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Authentication LDAP"
-msgstr "LDAP àóòîđèçàöèÿ"
+msgid "Disconnecting from the Internet "
+msgstr "Đàçêàśâàì îò Èíòćđíćò "
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LDAP"
-msgstr "LDAP"
+msgid "You'll need to reboot before the modification can take place"
+msgstr "Òđÿáâà äà đćńòàđòèđàòć, ïđćäè ïđîìćíèòć äà âëÿçàò â ńèëà"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Local files"
-msgstr "Ëîêàëíè ôàéëîâć"
+msgid "Provider phone number"
+msgstr "Òćëćôîíćí íîìćđ íà äîńòàâśèêà"
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Authentication"
-msgstr "Èäćíòèôèêàöèÿ"
+msgid "Host %s"
+msgstr "Őîńò %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr "Ïàđîëàòà ć ïđćêàëćíî ïđîńòà (òđÿáâà äà áúäć äúëăà ïîíć %d ńèìâîëà)"
+msgid "Armenia"
+msgstr "Àđìćíèÿ"
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No password"
-msgstr "Áćç ïàđîëà"
+msgid "Fiji"
+msgstr "Ôèäæè"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Set root password"
-msgstr "Âúâćäćòć ïàđîëà çà root"
+msgid ""
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
+msgstr ""
+"Àđăóìćíòè: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Çàäàâà çà ïàđîëàòà ìèíèìàëíàòà äúëæèíà, ìèíèìàëćí áđîé öèôđè è ìèíèìàëćí "
+"áđîé ăëàâíè áóêâè."
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr "Âèć íć ńòć êîíôèăóđèđàëè X. Ńèăóđíè ëè ńòć, ść èńêàòć òîâà?"
+msgid "Second floppy drive"
+msgstr "Âòîđî ôëîïè óńòđîéńòâî"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Óńëóăè: %d àêòèâèđàíè îò %d đćăèńòđèđàíè"
+msgid "About Harddrake"
+msgstr "Îòíîńíî Harddrake"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Services"
-msgstr "Óńëóăè"
+msgid "Drive capacity"
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "System"
-msgstr "Ńèńòćìà"
-
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "%s on %s"
-msgstr "Ïîđò"
+msgid ""
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
+msgstr ""
+"Ńëîæćòć äèńêćòà âúâ ôëîïèòî\n"
+"Âńèśêè äàííè, íàìèđàùè ńć âúđőó äèńêćòàòà, ùć áúäàò çàăóáćíè"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Bootloader"
-msgstr "Bootloader"
+msgid "Size: %s"
+msgstr "Đàçìćđ: %s"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Boot"
-msgstr "Ăëàâćí"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Control and Shift keys simultaneously"
+msgstr "Control è Shift êëàâèűè ćäíîâđćìćíî"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "disabled"
-msgstr "èçêëțśè"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "secondary"
+msgstr "âòîđè"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "activated"
-msgstr "àêòèâèđàé ńćăà"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "View Backup Configuration."
+msgstr "Ïđćăëćä íà Êîíôèăóđàöèÿ çà đćçćđâíî êîïèć."
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Firewall"
-msgstr "Ńúđâúđ, Firewall/Đóòćđ"
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, report check result to syslog."
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Security"
-msgstr "Ńèăóđíîńò"
+msgid "No password"
+msgstr "Áćç ïàđîëà"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Security Level"
-msgstr "Íèâî íà ńèăóđíîńò"
+#: ../../lang.pm:1
+#, c-format
+msgid "Nigeria"
+msgstr "Íèăćđèÿ"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Network"
-msgstr "Ìđćæà"
+msgid "There is no existing partition to use"
+msgstr "Íÿìà äÿë, êîéòî ìîăà äà èçïîëçâàì"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Network & Internet"
-msgstr "Ìđćæîâ èíòćđôćéń"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Graphical interface"
-msgstr "Ăđàôèśćí èíòćđôàéń"
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
+msgstr "Íÿìàòć ìđćæîâ àäàïòćđ!"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hardware"
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
msgstr ""
+"Çà äà ïćśàòàòć íà socket èëè TCP ïđèíòćđ, òđÿáâà äà ïđćäîńòàâèòć èìćòî íà "
+"őîńòà íà ïđèíòćđà è, ćâćíòóàëíî, íîìćđ íà ïîđò. Íà HP JetDirect ńúđâúđè, "
+"íîìćđúò íà ïîđòà îáèêíîâćííî ć 9100, íà äđóăè ńúđâúđè ìîæć äà âàđèđà. Âèæòć "
+"đúêîâîńòâîòî íà őàđäóćđà ńè."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "TV card"
-msgstr "TV êàđòà"
+msgid "Hard drive information"
+msgstr "Èíôîđìàöèÿòà çà òâúđäèÿ äèńê"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "Íÿìà îòêđèòà çâóêîâà êàđòà. Îïèòàéòć \"harddrake\" ńëćä èíńòàëàöèÿòà"
+msgid "Russian"
+msgstr "Đóńêà"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Jordan"
+msgstr "Éîđäàíèÿ"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-"Èçïúëíćòć \"sndconfig\" ńëćä èíńòàëàöèÿ çà äà êîíôèăóđèđàòć âàűàòà çâóêîâà "
-"êàđòà"
+msgid "Hide files"
+msgstr "Ńêđèé ôàéëîâćòć"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "Èìàòć ëè ISA çâóêîâà êàđòà?"
+msgid "Auto-detect printers connected to this machine"
+msgstr "Àâòîìàòèśíî îòêđèâà ïđèíòćđè ńâúđçàíè êúì òàçè ìàűèíà"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Sound card"
-msgstr "Çâóêîâà êàđòà"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Remote CUPS server"
-msgstr "Îòäàëćśćí CUPS ńúđâúđ"
+msgid "Sorry, no floppy drive available"
+msgstr "Ńúæàëÿâàì íÿìà ôëîïè"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No printer"
-msgstr "Íÿìà ïđèíòćđ"
+msgid "Bolivia"
+msgstr "Áîëèâèÿ"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer"
-msgstr "Ïđèíòćđ"
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Mouse"
-msgstr "Ìèűêà"
+msgid "Bad package"
+msgstr "Ëîű ïàêćò"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Timezone"
-msgstr "Śàńîâà çîíà"
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
+"Ïđćâđúùà âàűàòà ìàűèíà â ìîùćí Linux ńúđâúđ ń íÿêîëêî öúêâàíèÿ íà ìèűêàòà: "
+"Web ńúđâúđ, ïîùà, firewall, router, ôàéëîâ è ïđèíò ńúđâúđ, ..."
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Keyboard"
-msgstr "Êëàâèàòóđà"
+msgid "DrakSec Basic Options"
+msgstr "Îńíîâíè îïöèè íà DrakSec "
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Summary"
-msgstr "Îáîáùćíèć"
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program. Just type \"sndconfig\" in a console."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "NTP Server"
-msgstr "NTP ńúđâúđ"
+msgid "Romania"
+msgstr "Đóìúíèÿ"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Àâòîìàòèśíà ńèíőđîíèçàöèÿ íà âđćìćòî (èçïîëçâà NTP)"
+msgid "choose device"
+msgstr "èçáèđà óńòđîéńòâî"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Őàäđóćđíèÿò âè śàńîâíèê ć íàńòđîćí ïî GMT"
+msgid "Canada"
+msgstr "Êàíàäà"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Which is your timezone?"
-msgstr "Êîÿ ć âđćìćâàòà âè çîíà ?"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Would you like to try again?"
-msgstr "Èńêàòć ëè äà íàńòđîèòć ïćśàòà ?"
+msgid "Remove from LVM"
+msgstr "Ïđćìàőíè îò LVM"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Íć ìîăà äà íàïđàâÿ 'fork': %s"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Timezone"
+msgstr "Śàńîâà çîíà"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Ńâúđçâàíć ń îăëćäàëíèÿ ńúđâúđ çà ïîëóśàâàíć íà ńïèńúêà ń ïàêćòèòć"
+msgid "German"
+msgstr "Íćìńêà"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Èçáćđćòć îăëćäàëćí ńúđâúđ,îò êîéòî äà ïîëóśèòć ïàêćòèòć"
+msgid "Next ->"
+msgstr "Ńëćäâàù ->"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
msgstr ""
-"Ńâúđçâàíć ń Mandrake Linux web ńàéò çà ïîëóśàâàíć íà ńïèńúêà ń íàëèśíè "
-"îăëćäàëíè ńúđâúđè..."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates ?"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
msgstr ""
+"\n"
+"Âćđîÿòíî ć òîçè äÿë äà ć\n"
+"Äđàéâćđ-äÿë, ìîæć áè òđÿáâà\n"
+"òđÿáâà äà ăî îńòàâèòć.\n"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Ńëîæćòć äèńêćòà çà îáíîâÿâàíć íà ìîäóëè â óńòđîéńòâî %s"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Ńëîæćòć ńòàđòèđàùàòà äèńêćòà â óńòđîéńòâî %s"
+msgid "Guinea-Bissau"
+msgstr "Ăâèíćÿ-Áèńàó"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Post-install configuration"
-msgstr "Ńëćä èíńòàëàöèîííà íàńòđîéêà"
+msgid "Horizontal refresh rate"
+msgstr "Őîđèçîíòàëíà ńêîđîńò íà âúçńòàíîâÿâàíć"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Installing package %s\n"
-"%d%%"
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
msgstr ""
-"Èíńòàëèđàì ïàêćò %s\n"
-"%d%%"
+"Íć ìîăà äà ìàőíà òîśêàòà íà ìîíòèđàíć, òúé êàòî äÿëúò ńć èçïîëçâà çà "
+"loopback.\n"
+"Ïúđâî ìàőíćòć loopback"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Preparing installation"
-msgstr "Ïîäăîòâÿì èíńòàëàöèÿòà"
+msgid ""
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM îçàăëàâćí \"%s\""
+msgid "USB controllers"
+msgstr "USB êîíòđîëćđè"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Àêî èìàòć âńèśêè CD-òà îò ńïèńúêà ïî-ăîđć, íàòèńíćòć Ok.\n"
-"Àêî íÿìàòć íèòî ćäíî îò òćçè CD-òà, íàòèńíćòć Îòìÿíà.\n"
-"Àêî âè ëèïńâàò íÿêîè CD-òà, ìàőíćòć ăè, è íàòèńíćòć Ok. "
+msgid "What norm is your TV using?"
+msgstr "Êàêúâ ć òèïúò íà èçïîëçâàíèÿò TV ?"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "All"
-msgstr "Âńèśêè"
+msgid "Type:"
+msgstr "Òèï: "
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Íàèńòèíà ìèíèìàëíà èíńòàëàöèÿ (îńîáćííî áćç urpmi)"
+msgid "Share name"
+msgstr "Îáùî èìć"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Ń áàçîâà äîêóìćíòàöèÿ (ïđćïîđúśâà ńć!)"
+msgid "enable"
+msgstr "âêëțśè"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "With X"
-msgstr "Ń X"
+msgid ""
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
+msgstr ""
+"Ńâúđçâàíć ń Mandrake Linux web ńàéò çà ïîëóśàâàíć íà ńïèńúêà ń íàëèśíè "
+"îăëćäàëíè ńúđâúđè..."
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
msgstr ""
-"Âèć íć ńòć èçáđàëè íèêàêâà ăđóïà îò ïàêćòè.\n"
-"Ìîëÿ, èçáćđćòć ìèíèìàëíàòà èíńòàëàöèÿ êîÿòè èńêàòć:"
+"Èçíèêíà ïđîáëćì ïđè đćńòàđòèđàíćòî íà ìđćæàòà:\n"
+"\n"
+"%s"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Type of install"
-msgstr "Òèï èíńòàëàöèÿ"
+msgid "Remove the loopback file?"
+msgstr "Äà ïđćìàőíà ëè loopback ôàéëà ?"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Selected size is larger than available space"
msgstr "Èçáđàíàòà ăîëćìèíà ć ïî-ăîëÿìà îò äîńòúïíîòî ïđîńòđàíńòâî"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "Ńëîæćòć äèńêćòà ńúäúđæàùà èçáîđ íà ïàêćòè"
+msgid "NCP server name missing!"
+msgstr "Ëèïńâà èìć íà NCP ńúđâúđ !"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Loading from floppy"
-msgstr "Çàđćæäàíć îò äèńêćòà"
+msgid "Please choose your country."
+msgstr "Ìîëÿ, èçáćđćòć âàűàòà ńòđàíà."
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Package selection"
-msgstr "Èçáîđ íà ïàêćòè"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Hard Disk Backup files..."
+msgstr "Ëîű backup-ôàéë"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Save on floppy"
-msgstr "Çàïàçè íà äèńêćòà"
+msgid "Laotian"
+msgstr "Ëàîńêà"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Load from floppy"
-msgstr "Çàđćäè îò äèńêćòà"
+msgid "Samoa"
+msgstr "Ńàìîà"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
msgstr ""
-"Ìîæć èçáćđćòć çàđćæäàíć èëè çàïèń íà èçáîđà íà ïàêćòè íà ôëîïè.\n"
-"Ôîđìàòúò ć ńúùèÿò êàòî auto_install ăćíćđèđàíèòć äèńêćòè."
+"rstat ïđîòîêîëà ïîçâîëÿâà íà ìđćæîâèòć ïîòđćáèòćëè äà èçâëèśàò\n"
+"ïàđàìćòđèòć íà âúçìîæíîńòèòć çà âńÿêà ìàűèíà íà ìđćæàòà."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+msgid "Re-generating list of configured scanners ..."
msgstr ""
-"Ńèńòćìàòà âè íÿìà äîńòàòúśíî ìÿńòî çà èíńòàëàöèÿ èëè îáíîâÿâàíć (%d > %d)"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Looking for available packages..."
-msgstr "Òúđńÿ íàëèśíè ïàêćòè..."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Òúđńÿ ïàêćòè çà îáíîâÿâàíć"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Looking at packages already installed..."
-msgstr "Òúđńè âúâ âćść èíńòàëèđàíèòć ïàêćòè..."
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "Òúđńÿ íàëèśíè ïàêćòè è ïđćïîńòđîÿâàì rpm áàçàòà äàííè..."
+msgid "Scanner"
+msgstr "Ńêćíćđ"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
+msgid "Warning: testing this graphic card may freeze your computer"
msgstr ""
-"Íÿìà äîńòàòúśíî swap çà ïđèêëțśâàíć íà èíńòàëàöèÿòà, ìîëÿ äîáàâćòć ìàëêî"
+"Âíèìàíèć: òćńòâàíćòî íà òàçè ăđàôèśíà êàđòà ìîæć äà çàìđàçè êîìïțòúđà âè"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr ""
-"Íćóńïćűíà ïđîâćđêà íà ôàéëâà ńèńòćìà %s. Èńêàòć ëè äà îïđàâèòć ăđćűêèòć? "
-"(áúäćòć âíèìàòćëíè, ìîæć äà çàăóáèòć äàííè)"
+"Ïîòđćáèòćëńêîòî èìć ìîæć äà âêëțśâà ńàìî ìàëêè áóêâè, íîìćđà, `-' è `_'"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Check bad blocks?"
-msgstr "Ïđîâćđêà çà ëîűè ńćêòîđè ?"
+msgid "Menudrake"
+msgstr "Menudrake"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Èçáćđćòć äÿëîâćòć, êîèòî èńêàòć äà ôîđìàòèđàòć"
+msgid "Welcome To Crackers"
+msgstr "Äîáđć äîűëè ïđè Cracker-èòć"
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Íàëàăà ńć đà đćńòàđòèđàòć, ïđćäè ìîäèôèêàöèèòć äà ïđćäèçâèêàò ćôćêò"
+msgid "Module options:"
+msgstr "Îïöèè íà ìîäóëà:"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+msgid "Secure your networks with the Multi Network Firewall"
msgstr ""
-"Íÿìà ńâîáîäíî ìÿńòî çà 1 ÌÁ ńòàđòèđàùî ïîëć ! Èíńòàëàöèÿòà ùć ïđîäúëæè, íî, "
-"çà äà ńòàđòèđàòć ńèńòćìàòà ńè, ùć òđÿáâà äà ńúçäàäćòć ńòàđòèđàùî ïîëć â "
-"DiskDrake"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the mount points"
-msgstr "Èçáćđćòć ìćńòà çà ìîíòèđàíć"
+msgid "Go on without configuring the network"
+msgstr "Ïđîäúëæè áćç íàńòîéêà íà ìđćæàòà"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Ïđćòúđńâàíć íà äÿëîâćòć çà íàìèđàíć íà òîśêè íà ìîíòèđàíć"
+msgid "Abort"
+msgstr "Îòêàç"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No partition available"
-msgstr "íÿìà äÿëîâć íà đàçïîëîæćíèć"
+msgid "No password prompt on %s at port %s"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configuring IDE"
-msgstr "Íàńòđîéêà íà IDE"
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "Ìîëÿ, ïđîâćđćòć äàëè èńêòć äà èçïîëâàòć íćïđćíàâèâàűî ńć óńòđîéńòâî."
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "IDE"
-msgstr "IDE"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Usage of remote scanners"
+msgstr "Èçïîëçâàé ńâîáîäíîòî ìÿńòî"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "Íàńòđîéêà íà PCMCIA êàđòèòć ..."
+msgid "\t-CDROM.\n"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
+msgstr ""
+"Âàűèÿò Windows äÿë ć ìíîăî ôđàăìćíòèđàí, ìîëÿ ïúđâî ńòàđòèđàéòć ''defrag''"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Button 3 Emulation"
-msgstr "Èìèòàöèÿ íà 3 áóòîíà"
+msgid "Dvorak (Norwegian)"
+msgstr "Äâîđàê (Íîđâćæêà)"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Button 2 Emulation"
-msgstr "Èìèòàöèÿ íà 2 áóòîíà"
+msgid "Hard Disk Backup Progress..."
+msgstr "Ïđîăđćń çà đćçćđâíî êîïèć íà òâúđä äèńê..."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Buttons emulation"
-msgstr "Èìèòàöèÿ íà áóòîíè"
+msgid "Unable to fork: %s"
+msgstr "Íć ìîăà äà íàïđàâÿ 'fork': %s"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Ìîëÿ, èçáćđćòć êúì êîé ńćđèćí ïîđò ć ńâúđçàíà ìèűêàòà âè."
+msgid "Type: "
+msgstr "Âèä: "
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Mouse Port"
-msgstr "Ïîđò íà ìèűêàòà"
+msgid "<-- Edit Client"
+msgstr "<-- Đćäàêòèđà êëèćíò"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Please choose your type of mouse."
-msgstr "Ìîëÿ, èçáćđćòć òèï íà ìèűêàòà."
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Encryption key for %s"
-msgstr "Êëțś çà êđèïòèđàíć"
+msgid "no fonts found"
+msgstr "íÿìà íàìćđćíè űđèôòîâć"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Upgrade %s"
-msgstr "Îáíîâÿâà %s"
+msgid "Mouse"
+msgstr "Ìèűêà"
-#: ../../install_steps_interactive.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Òîâà íîâà èíńòàëàöèÿ ëè ć èëè îáíîâÿâàíć ?"
+msgid "not enough room in /boot"
+msgstr "íÿìà äîńòàòúśíî ìÿńòî çà /boot"
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Install/Upgrade"
-msgstr "Èíńòàëèđàé/Îáíîâè"
+msgid "Choosing an arbitratry driver"
+msgstr "Èçáîđ íà ńëóśàćí äđàéâćđ"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "Ćòî ïúëćí ńïèńúê íà äîńòđúïíèòć êëàâèàòóđè"
+msgid "Host name"
+msgstr "Èìć íà őîńò:"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Ìîëÿ, èçáćđćòć ïîäđćæäàíć íà êëàâèàòóđàòà."
+msgid "Liechtenstein"
+msgstr "Ëèőòćíùàéí"
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Quit"
-msgstr "Èçőîä"
+msgid "the color of the progress bar"
+msgstr "öâćòúò íà ëćíòàòà çà ïđîăđćń"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "License agreement"
-msgstr "Ëèöćíçèîíćí äîăîâîđ"
+msgid "Suppress Fonts Files"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "An error occurred"
-msgstr "Ïîÿâè ńć ăđćűêà"
+msgid "Add to RAID"
+msgstr "Ïđèáàâè êúì RAID"
-#: ../../install_steps_newt.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
msgstr ""
-" <Tab>/<Alt-Tab> ìćæäó ćëćìćíòèòć | <Space> èçáèđà | <F12> ńëćäâàù ćêđàí"
-
-#: ../../install_steps_newt.pm:1
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Èíńòàëàöèÿ íà Mandrake Linux %s"
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No floppy drive available"
-msgstr "Íÿìà ôëîïè óńòđîéńòâî"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"Ïđèíòćđúò \"%s\" ć áèë óńïćűíî äîáàâćí êúì Star Office/OpenOffice.org/GIMP."
-#: ../../install_steps.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Welcome to %s"
-msgstr "Äîáđć äîűëè â %s"
+msgid "No floppy drive available!"
+msgstr "Íÿìà ôëîïè óńòđîéńòâî!"
-#: ../../install_steps.pm:1
-#, c-format
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
msgstr ""
-"Íÿêîè âàæíè ïàêćòè íć ńć èíńòàëèđàőà êàêòî òđÿáâà.\n"
-"Èëè CDROM óńòđîéńòâîòî âè èëè êîìïàêò äèńêà âè ć äćôćêòćí.\n"
-"Ïđîâćđćòć êîìïàêò äèńêà íà èíńòàëèđàíèÿ êîìïțòúđ èçïîëçâàéêè \"rpm -qpl "
-"Mandrake/RPMS/*.rpm\"\n"
+"Çà äà âèäèòć ńïèńúê íà äîńòúïíèòć îïöèè çà òćêóùèÿ ïđèíòćđ, èëè ïđîśćòćòć "
+"ńïèńúêà ïîêàçàí ïî-äîëó èëè öúêíćòć íà áóòîíà \"Ńïèńúê ń îïöèè çà ïćśàò\".%s%"
+"s\n"
-#: ../../install_steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Äóáëèđàé òîśêàòà íà ìîíòèđàíć %s"
+msgid "Continue anyway?"
+msgstr "Ïđîäúëæćíèć âúïđćêè âńèśêî ?"
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Ïîÿâè ńć ăđćűêà, íî íć çíàì êàê äà ńć ńïđàâÿ ń íćÿ äćëèêàòíî.\n"
-"Ìîæćòć äà ïđîäúëæèòć íà ńâîé đèńê."
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
+msgstr "Àêî âàűèÿò ïđèíòćđ íć ć â ńïèńúêà, èçáćđćòć ńúâìćńòèì èëè ïîäîáćí."
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please wait"
-msgstr "Ìîëÿ èçśàêàéòć"
+msgid "Printer"
+msgstr "Ïđèíòćđ"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ok"
-msgstr "Ok"
+msgid "Saudi Arabia"
+msgstr "Ńàóäèòńêà Àđàáèÿ"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Finish"
-msgstr "Çàâúđűè"
+msgid "Internet"
+msgstr "Èíòćđíćò"
-#: ../../interactive.pm:1 ../../standalone/draksec:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Basic"
-msgstr "Áàçîâ"
+msgid "Some devices were added:\n"
+msgstr ""
-#: ../../interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Advanced"
-msgstr "Íàïđćäíèśàâ"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "Ăćîìćòđèÿ: %s öèëèíäđè, %s ăëàâè, %s ńćêòîđè\n"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove"
-msgstr "Ïđćìàőâà"
+msgid "Printing on the printer \"%s\""
+msgstr "Ïćśàòàíć íà ïđèíòćđ \"%s\""
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Modify"
-msgstr "Ìîäèôèöèđà"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr ""
+"/etc/hosts.allow è /etc/hosts.deny âćść ńà êîíôèăóđèđàíè - íć ńà ïđîìćíćíè"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add"
-msgstr "Äîáàâÿ"
+msgid "Restore From Tape"
+msgstr "Âúçńòàíîâÿâà îò ëćíòà"
-#: ../../interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Choose a file"
-msgstr "Èçáćđćòć ôàéë"
+msgid "Choose the profile to configure"
+msgstr "Èçáćđćòć ïđîôèë çà íàńòđîéêà"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
msgstr ""
-"Òóê ìîæć äà èçáćđćòć êëàâèű èëè êëàâèűíà êîìáèíàöèÿ, êîÿòî \n"
-"ùć âè ïîçâîëè äà èçáèđàòć đàçëèśíè êëàâèàòóđíè ïîäđćäáè\n"
-"(íàïđ. latin è íć latin)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "Äćńćí \"Windows\" êëàâèű"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Left \"Windows\" key"
-msgstr "Ëÿâ \"Windows\" êëàâèű"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "\"Menu\" key"
-msgstr "\"Menu\" êëàâèű"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup Now from configuration file"
+msgstr "Íàńòđîéêà íà ìđćæàòà"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt è Shift êëàâèűè ćäíîâđćìćííî"
+msgid "Mount points should contain only alphanumerical characters"
+msgstr "Òîśêèòć çà ìîíòèđàíć òđÿáâà äà ńúäúđæàò ńàìî áóêâè è öèôđè"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl è Alt êëàâèűè ćäíîâđćìćííî"
+msgid "Restarting printing system..."
+msgstr "Đćńòàđòèđàíć íà ïđèíòćđíàòà ńèńòćìà"
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "CapsLock key"
-msgstr "CapsLock êëàâèű"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Control è Shift êëàâèűè ćäíîâđćìćíî"
+msgid "See hardware info"
+msgstr "Âèæ őàđäóćđíàòà èíôîđìàöèÿ"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "Äâàòà Shift êëàâèűà ćäíîâđćìćííî"
+msgid "First sector of boot partition"
+msgstr "Ïúđâè ńćêòîđ îò ńòàđòèđàùèÿ ńć äÿë"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Right Alt key"
-msgstr "Äćńćí Alt êëàâèű"
+msgid "Printer manufacturer, model"
+msgstr "Ïđîèçâîäèòćë íà ïđèíòćđà, ìîäćë"
-#: ../../keyboard.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Yugoslavian (latin)"
-msgstr "Țăîńëàâńêà (ëàòèíèöà)"
+msgid "PDQ - Print, Don't Queue"
+msgstr "PDQ - Ïćśàòàé, Áćç Îïàűêà"
-#: ../../keyboard.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Âèćòíàìńêà \"śèńëîâà đćäèöà\" QWERTY"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "US keyboard (international)"
-msgstr "US êëàâèàòóđà (ìćæäóíàđîäíà)"
+msgid "Subnet Mask:"
+msgstr "Ìàńêà íà ïîäìđćæà:"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "US keyboard"
-msgstr "US êëàâèàòóđà"
+msgid "LiLo and Bootsplash themes installation successfull"
+msgstr "LiLo è Bootsplash òćìè ńà óńïćűíî èíńòàëèđàíè"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "UK keyboard"
-msgstr "UÊ êëàâèàòóđà"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"Äâàòà êđèòèśíè ïàđàìćòúđà ńà âćđòèêàëíàòà ńêîđîńò íà âúçńòàíîâÿâàíć, êîÿòî "
+"îòđàçÿâà ńêîđîńòòà, \n"
+"ń êîÿòî öćëèÿò ćêđàí ńć âúçńòàíîâÿâà, è íàé-âàæíîòî - őîđèçîíòàëíàòà\n"
+"ńèíőđîíèçàöèîííà ńêîđîńò, êîÿòî îòđàçÿâà ńêîđîńòòà, ń êîÿòî ńć èçïèńâàò "
+"őîđèçîíòàëíèòć ëèíèè.\n"
+"\n"
+"ÌÍÎĂÎ Ć ÂÀÆÍÎ äà èçáćđćòć òàêàâà ńèíőđîíèçàöèîííàòà ńêîđîńò, êîÿòî äà "
+"îòăîâàđÿ íà âúçìîæíîńòèòć íà Âàűèÿ ìîíèòîđ - â ïđîòèâćí ńëóśàé ìîæćòć äà "
+"ïîâđćäèòć ìîíèòîđà ńè.\n"
+" Àêî èìàòć íÿêàêâè ńúìíćíèÿ, èçáćđćòć êîíńćđâàòèâíà íàńòđîéêà."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Ukrainian"
-msgstr "Óêđàèíńêà"
+msgid "Modify"
+msgstr "Ìîäèôèöèđà"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Òóđńêà (ìîäćđćí \"Q\" ìîäćë)"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
+"\n"
+"Êîìàíäèòć \"%s\" è \"%s\" ńúùî òàêà ïîçâîëÿâàò äà ïîïđàâÿòć èçáđàíèòć "
+"íàńòđîéêè çà îïđćäćëćíà đàáîòà íà ïđèíòćđà. Ïđîńòî äîáàâćòć èńêàíèòć "
+"íàńòđîéêè êúì êîìàíäíèÿ đćä, íàïđ. \"%s <file>\".\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Òóđńêà (òđàäèöèîíćí \"F\" ìîäćë)"
+msgid "Need hostname, username and password!"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Tajik keyboard"
-msgstr "Òàäæèêèńòàíńêà êëàâèàòóđà"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Thai keyboard"
-msgstr "Òàéâàíńêà êëàâèàòóđà"
+msgid "HardDrake"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "Òàìèëńêà (ïèűćùà ìàűèíà)"
+msgid "new"
+msgstr "íîâ"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr "Òàìèëńêà (ISCII-ïîäđćäáà)"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Would you like to try again?"
+msgstr "Èńêàòć ëè äà íàńòđîèòć ïćśàòà ?"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Serbian (cyrillic)"
-msgstr "Ńđúáńêà (êèđèëèöà)"
+msgid "Wizard"
+msgstr "Ìàăüîńíèê"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Ńëîâàűêà (QWERTY)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Edit selected server"
+msgstr "çàńćśćíà %s"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Ńëîâàűêà (QWERTZ)"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please choose where you want to backup"
+msgstr "Ìîëÿ, èçáćđćòć ïàêćòèòć, êîèòî èńêàòć äà èíńòàëèđàòć."
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Slovenian"
-msgstr "Ńëîâćíńêà"
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr "Íàëàăà ńć đà đćńòàđòèđàòć, ïđćäè ìîäèôèêàöèèòć äà ïđćäèçâèêàò ćôćêò"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Swedish"
-msgstr "Űâćäńêà"
+msgid "Do not include the browser cache"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Russian (Yawerty)"
-msgstr "Đóńêà (Yawerty)"
+msgid "Please, choose your keyboard layout."
+msgstr "Ìîëÿ, èçáćđćòć ïîäđćæäàíć íà êëàâèàòóđàòà."
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
-msgid "Russian"
-msgstr "Đóńêà"
+msgid "Standard"
+msgstr "Ńòàíäàđòíà"
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Romanian (qwerty)"
-msgstr "Đóìúíńêà (qwerty)"
+msgid "Please choose your mouse type."
+msgstr "Ìîëÿ, èçáćđćòć òèï íà ìèűêàòà."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Romanian (qwertz)"
-msgstr "Đóìúíńêà (qwertz)"
+msgid "Connect..."
+msgstr "Ńâúđçâàíć ..."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Canadian (Quebec)"
-msgstr "Êàíàäńêà (Êâćáćê)"
+msgid "Failed to configure printer \"%s\"!"
+msgstr "ÍÍćóńïćűíà íàńòđîéêà íà ïđèíòćđ \"%s\"!"
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Portuguese"
-msgstr "Ïîđòóăàëńêà"
+msgid "not configured"
+msgstr "íć ć êîíôèăóđèđàí"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Ïîëńêà (QWERTZ íàđćäáà)"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Ïîëńêà (QWERTY íàđćäáà)"
+msgid "About"
+msgstr "Îòíîńíî"
-#: ../../keyboard.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Norwegian"
-msgstr "Íîđâćæêà"
+msgid "Proxies configuration"
+msgstr "Íàńòđîéêà íà proxy"
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Dutch"
-msgstr "Őîëàíäńêà"
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Maltese (US)"
-msgstr "Ìàëòèéńêà (US)"
+msgid "Start: sector %s\n"
+msgstr "Íàśàëî: ńćêòîđ %s\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Maltese (UK)"
-msgstr "Ìàëòèéńêà (UK)"
+msgid "Network interface already configured"
+msgstr "Ìđćæîâèÿò èíòćđôćéń âćść ć êîíôèăóđèđàí"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Ìîíăîëńêà (êèđèëèöà)"
+msgid "Couldn't access the floppy!"
+msgstr "Íÿìàì äîńòúï äî ôëîïè!"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Myanmar (Burmese)"
-msgstr "Ìàéíìàđ (áèđìàíńêà)"
+msgid "connecting to Bugzilla wizard ..."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Macedonian"
-msgstr "Ìàêćäîíńêà"
+msgid "Mail Server"
+msgstr "Ïîùćíńêè ńúđâúđ"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Malayalam"
-msgstr "Ìàëàéëàì"
+msgid "Please click on a partition"
+msgstr "Ìîëÿ, öúêíćòć íà äÿëà"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Latvian"
-msgstr "Ëàòâèéńêà"
+msgid "Linux"
+msgstr "Linux"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Ëèòâèéńêà \"ôîíćòèśćí\" QWERTY"
+msgid "Have a nice day!"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Ëèòâèéńêà \"śèńëîâà đćäèöà\" QWERTY"
+msgid "across Network"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Ëèòâèéńêà AZERTY (íîâà)"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Ëèòâèéńêà AZERTY (ńòàđà)"
+msgid "Upgrade %s"
+msgstr "Îáíîâÿâà %s"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Laotian"
-msgstr "Ëàîńêà"
+msgid "Select Printer Connection"
+msgstr "Èçáćđćòć âđúçêà êúì ïđèíòćđà"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Latin American"
-msgstr "Ëàòèíîàìćđèêàíńêà"
+msgid "Scanning for TV channels in progress ..."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Korean keyboard"
-msgstr "Êîđćéńêà êëàâèàòóđà"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Japanese 106 keys"
-msgstr "ßïîíńêà 106 êëàâèűà"
+msgid "IP Range Start:"
+msgstr "Íàśàëî íà IP îáőâàò:"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Inuktitut"
-msgstr "Èíóêòèòóò"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"Internet superserver daemon (śćńòî íàđèśàí inetd) ïóńêà đàçëèśíè äđóăè\n"
+"Èíòćđíćò óńëóăè. Òîé îòăîâàđÿ çà ïóńêàíćòî íà ìíîăî óńëóăè îò đîäà íà\n"
+"telnet, ftp, rsh è rlogin. Èçêëțśâàíćòî íà inetd èçêëțśâà âńèśêè óńëóăè,\n"
+"çà êîèòî îòăîâàđÿ."
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Italian"
-msgstr "Èòàëèàíńêà"
+msgid "the height of the progress bar"
+msgstr "âèńîśèíàòà íà ëćíòàòà çà ïđîăđćń"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Icelandic"
-msgstr "Èńëàíäńêà"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Iranian"
-msgstr "Èđàíńêà"
+msgid "Argentina"
+msgstr "Àđæćíòèíà"
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "Èçđàćëńêà (ôîíćòèśíà)"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Ïîçâîëÿâà/Çàáđàíÿâà broadcasted icmp echo."
-#: ../../keyboard.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Israeli"
-msgstr "Èçđàćëńêà"
+msgid "Domain Name Server"
+msgstr "Domain Name Server"
-#: ../../keyboard.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Croatian"
-msgstr "Őúđâàòńêà"
+msgid "Security Level:"
+msgstr "Íèâî íà ńèăóđíîńò:"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Hungarian"
-msgstr "Óíăàđńêà"
+msgid "Mount points must begin with a leading /"
+msgstr "Òîśêèòć íà ìîíòèđàíć òđÿáâà äà çàïîśâàò ń /"
-#: ../../keyboard.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Gurmukhi"
-msgstr "Ăóđìóêśè"
+msgid "Postfix Mail Server"
+msgstr "Postfix Ïîùćíńêè ńúđâúđ"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Gujarati"
-msgstr "Ăóàäæàđàòè"
+msgid "Quit without saving"
+msgstr "Èçőîä áćç çàïèń"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Greek"
-msgstr "Ăđúöêà"
+msgid "Yemen"
+msgstr "Éćìćí"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Ăđóçèíńêà (\"Ëàòèíńêà\" íàđćäáà)"
+msgid "This product is available on the MandrakeStore Web site."
+msgstr "Òîçè ïđîäóêò ć äîńòúïćí îò web ńàéòà íà MandrakeStore"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Ăđóçèíńêà (\"Đóńêà\" íàđćäáà)"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr ""
+"Ìîëÿ, âúâćäćòć ìàêńèìàëíèÿò đàçìćđ\n"
+" ïîçâîëćí çà Drakbackup"
-#: ../../keyboard.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "French"
-msgstr "Ôđćíńêà"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr "=> Èìà ìíîăî íćùà çà èçáîđ îò (%s).\n"
-#: ../../keyboard.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Finnish"
-msgstr "Ôèíëàíäńêà"
+msgid "Hard drive detection"
+msgstr "Çàńèśàíć íà äèńêîâćòć"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Spanish"
-msgstr "Èńïàíńêà"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
+"Âèć íć ńòć èçáđàëè íèêàêâà ăđóïà îò ïàêćòè.\n"
+"Ìîëÿ, èçáćđćòć ìèíèìàëíàòà èíńòàëàöèÿ êîÿòè èńêàòć:"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Estonian"
-msgstr "Ćńòîíńêà"
+msgid "Please enter the WebDAV server URL"
+msgstr "Ìîëÿ âúâćäćòć WebDAV ńúđâúđ URL"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Äâîđàê (Űâćäńêà)"
+msgid "Tajikistan"
+msgstr "Òàäæèêèńòàí"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Äâîđàê (Íîđâćæêà)"
+msgid "Accept"
+msgstr "Ïđèćìè"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Dvorak (US)"
-msgstr "Äâîđàê (US)"
+msgid "Description"
+msgstr "Îïèńàíèć"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Danish"
-msgstr "Äàòńêà"
+msgid "Error opening %s for writing: %s"
+msgstr "Ăđćűêà ïđè îòâàđÿíć íà %s çà çàïèń: %s"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Devanagari"
-msgstr "Äàâćíàäæàđè"
+msgid "Mouse type: %s\n"
+msgstr "Òèï ìèűêà: %s\n"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "German (no dead keys)"
-msgstr "Íćìńêà (áćç íćđàáîòćùè êëàâèűè)"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr "Êàđòàòà âè ìîæć äà èìà ïîääđúæêà íà őàđäóćđíî 3D óńêîđćíèć â XFree %s."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "German"
-msgstr "Íćìńêà"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "Ìîëÿ, èçáćđćòć đàçìćđà íà âàűćòî CD/DVD (Mb)"
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Czech (QWERTY)"
-msgstr "Śćűêà (QWERTY)"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Czech (QWERTZ)"
-msgstr "Śćűêà (QWERTZ)"
+msgid "Expert Area"
+msgstr "Äîïúëíèòćëíè"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Swiss (French layout)"
-msgstr "Űâćéöàđńêà (ôđćíńêè íàđćäáà)"
+msgid "Choose a monitor"
+msgstr "Èçáćđćòć ìîíèòîđ"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Swiss (German layout)"
-msgstr "Űâćéöàđńêà (íćìńêà íàđćäáà)"
+msgid "Empty label not allowed"
+msgstr "Ïđàçćí ćòèêćò íć ć đàçđćűćí"
#: ../../keyboard.pm:1
#, c-format
-msgid "Belarusian"
-msgstr "Áćëàđóńêà"
+msgid "Maltese (UK)"
+msgstr "Ìàëòèéńêà (UK)"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Bosnian"
-msgstr "Áîńíćíńêà"
+msgid "I can't add any more partition"
+msgstr "Íć ìîăà äà äîáàâÿ ïîâćść äÿëîâć"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "Áđàçèëńêà (ABNT-2)"
+msgid "Size in MB: "
+msgstr "Ăîëćìèíà â MB: "
-#: ../../keyboard.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Bulgarian (BDS)"
-msgstr "Áúëăàđńêà (BDS)"
+msgid "Remote printer"
+msgstr "Îòäàëćśćí ïđèíòćđ"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "Áúëăàđńêà (ôîíćòèśćí)"
+msgid "Please choose a language to use."
+msgstr "Ìîëÿ, èçáćđćòć ćçèê çà èçïîëçâàíć."
-#: ../../keyboard.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Bengali"
-msgstr "Áćíăàëńêà"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
+"ÂÍÈÌÀÍÈĆ: Òîâà óńòđîéńòâî âćść ć íàńòđîćíî äà ńć ńâúđçâà êúì Èíòćđíćò.\n"
+"Ïđîńòî ïđèćìćòć, çà äà îńòàâèòć óńòđîéńòâîòî íàńòđîćíî.\n"
+"Ïîïđàâêàòà íà ïîëćòàòà ïî-äîëó ùć ïđćçàïèűć òàçè íàńòđîéêà."
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Belgian"
-msgstr "Áćëăèéńêà"
+msgid "I can set up your computer to automatically log on one user."
+msgstr ""
+"Ìîăà äà íàńòđîÿ êîìïțòúđà âè çà âëèçàíć â ńèńòćìàòà àâòîìàòèśíî êàòî íÿêîé "
+"ïîòđćáèòćë."
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "Àçćđáàéäæàíńêà (ëàòèíèöà)"
+msgid "Floppy format"
+msgstr "Ôîđìàòèđà ôëîïè"
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Arabic"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Armenian (phonetic)"
-msgstr "Àđìćíńêà (ôîíćòèśćí)"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Generic Printers"
+msgstr "Ïđèíòćđ"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Armenian (typewriter)"
-msgstr "Àđìćíńêà (ïèűćùà ìàűèíà)"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Armenian (old)"
-msgstr "Àđìćíńêà (ńòàđà)"
+msgid "The scanners on this machine are available to other computers"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Albanian"
-msgstr "Àëáàíńêà"
+msgid "First sector of the root partition"
+msgstr "Ïúđâè ńćêòîđ îò ńòàđòèđàùèÿ ńć äÿë"
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Polish"
-msgstr "Ïîëńêà"
+msgid "Alternative drivers"
+msgstr "Àëòćđíàòèâíè äđàéâćđè"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Dvorak"
-msgstr "Äâîđàê"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Zimbabwe"
-msgstr "Çèìáàáâć"
+msgid "Initrd"
+msgstr "Initrd"
#: ../../lang.pm:1
#, c-format
-msgid "Zambia"
-msgstr "Çàìáèÿ"
+msgid "Cape Verde"
+msgstr "Êàïî Âćđäć"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "South Africa"
-msgstr "Țæíà Àôđèêà"
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Serbia"
-msgstr "Ńđúáèÿ"
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Mayotte"
-msgstr "Ìàéîò"
+msgid "Guam"
+msgstr "Ăóàì"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Yemen"
-msgstr "Éćìćí"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
+msgstr ""
+"Ìîëÿ, èçáćđćòć ïîđòà íà êîéòî âàűèÿò ïđèíòćđ ć çàêàśćí èëè âúâćäćòć èìć íà "
+"óńòđîéńòâî/èìć íà ôàéë âúâ âőîäíîòî ïîëć"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Samoa"
-msgstr "Ńàìîà"
+msgid "/Options/Test"
+msgstr "/Îïöèè/Òćńò"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Wallis and Futuna"
-msgstr "Óîëèń è Ôóòóíà Îńòđîâè"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+"Òîâà íèâî ńć èçïîëçâà ń âíèìàíèć. Òîâà êàđà ńèńòćìàòà âè ïî-ëćńíà çà\n"
+"óïîòđćáà, íî ć ïî-śóâńòâèòćëíî: íć òđÿáâà äà áúäć èçïîëçâàíà íà ìàűèíè\n"
+"ńâúđçàíè ń äđóăè èëè ïî Èíòćđíćò. Íÿìà äîńòúï ń ïàđîëè."
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Vanuatu"
-msgstr "Âàíóàòó"
+msgid "Mounting partition %s"
+msgstr "Ôîđìàòèđà äÿë %s"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Vietnam"
-msgstr "Âèćòíàì"
+msgid "User name"
+msgstr "Ïîòđćáèòćëńêî èìć"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Âèđäæèíńêè Îńòđîâè (ŃÀÙ)"
+msgid "New configuration (isdn-light)"
+msgstr "Íîâà íàńòđîéêà (isdn-light)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Virgin Islands (British)"
-msgstr "Âèđäæèíńêè Îńòđîâè (Áđèòàíńêè)"
+msgid "Userdrake"
+msgstr "Userdrake"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Venezuela"
-msgstr "Âćíćöóćëà"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "Êîé äÿë èńêàòć äà èçïîëçâàòć çà Linux4Win ?"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "Ńâćòè Âèíńćíò è Ăđćíàäèí"
+msgid "Backup system"
+msgstr "Ńèńòćìà çà ńúőđàíćíèć"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Vatican"
-msgstr "Âàòèêàíà"
+msgid "Test pages"
+msgstr "Òćńòîâè ńòđàíèöè"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Uzbekistan"
-msgstr "Óçáćêèńòàí"
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Uruguay"
-msgstr "Óđóăâàé"
+msgid "Checking %s"
+msgstr "Ïđîâćđêà íà %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "Ìàëêè Îńòđîâè ïî êđàéáđćæèćòî íà ŃÀÙ"
+msgid "TCP/Socket Printer Options"
+msgstr "TCP/Socket Îïöèè íà ïđèíòćđ"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Uganda"
-msgstr "Óăàíäà"
+msgid "Card mem (DMA)"
+msgstr "Ïàìćò (DMA) íà êàđòàòà"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Ukraine"
-msgstr "Óêđàéíà"
+msgid "France"
+msgstr "Ôđàíöèÿ"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Tanzania"
-msgstr "Òàíçàíèÿ"
+msgid "browse"
+msgstr "ïđćăëćä"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Taiwan"
-msgstr "Òàéâàí"
+msgid "Checking installed software..."
+msgstr "Ïđîâćđêà íà èíńòàëèđàíèÿ ńîôòóćđ..."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Tuvalu"
-msgstr "Òóâàëó"
+msgid "Remote printer name missing!"
+msgstr "Ëèïńâà èìć íà îòäàëćśćí ïđèíòćđ !"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Òđèíèäàä è Òîáàăî"
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "Èńêàòć ëè äà đàçđćűèòć ïćśàò íà ïđèíòćđèòć â ëîêàëíàòà ìđćæà?\n"
#: ../../lang.pm:1
#, c-format
msgid "Turkey"
msgstr "Òóđöèÿ"
-#: ../../lang.pm:1
-#, c-format
-msgid "Tonga"
-msgstr "Òîíăà"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Tunisia"
-msgstr "Òóíèń"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Turkmenistan"
-msgstr "Òóđêìćíèńòàí"
-
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "East Timor"
-msgstr "Èçòîśćí Òèìîđ"
+msgid "Alcatel speedtouch usb"
+msgstr "Alcatel speedtouch USB"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Tokelau"
-msgstr "Òîêćëàó"
+msgid "Number of buttons"
+msgstr "Áđîé áóòîíè"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Tajikistan"
-msgstr "Òàäæèêèńòàí"
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Âèćòíàìńêà \"śèńëîâà đćäèöà\" QWERTY"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Thailand"
-msgstr "Òàéëàíä"
+msgid "Module"
+msgstr "Ìîäóë"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Togo"
-msgstr "Òîăî"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
+msgstr ""
+"Êàòî äîïúëíćíèć, îïàűêèòć íć ńúçäàäćíè ń òàçè ïđîăđàìà èëè \"foomatic-"
+"configure\" íć ìîăàò äà áúäàò ïđćőâúđëÿíè."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "French Southern Territories"
-msgstr "Ôđàíöèÿ Țæíè Òćđèòîđèè"
+msgid "Hardware"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Chad"
-msgstr "Śàä"
+msgid "Ctrl and Alt keys simultaneously"
+msgstr "Ctrl è Alt êëàâèűè ćäíîâđćìćííî"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "Òțđê è Êàéêîń Îńòđîâè"
+msgid "United States"
+msgstr "ŃÀÙ"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Swaziland"
-msgstr "Ńâàçèëćíä"
+msgid "Default OS?"
+msgstr "ÎŃ ïî ïîäđàçáèđàíć ?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Syria"
-msgstr "Ńèđèÿ"
+msgid "Swiss (German layout)"
+msgstr "Űâćéöàđńêà (íćìńêà íàđćäáà)"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "El Salvador"
-msgstr "Ćë Ńàëâàäîđ"
+msgid "Configure all heads independently"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sao Tome and Principe"
-msgstr "Ńàî Òîìć è Ïđèíńèïè"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Suriname"
-msgstr "Ńóđèíàì"
+msgid "NTP Server"
+msgstr "NTP ńúđâúđ"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Somalia"
-msgstr "Ńîìàëèÿ"
+msgid "Load/Save on floppy"
+msgstr "Çàđćäè/Çàïàçè íà äèńêćòà"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Senegal"
-msgstr "Ńćíćăàë"
+msgid "This theme does not yet have a bootsplash in %s !"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "San Marino"
-msgstr "Ńàí Ìàđèíî"
+msgid "nice"
+msgstr "äîáúđ"
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Sierra Leone"
-msgstr "Ńèćđà Ëćîíć"
+msgid "Leaving in %d seconds"
+msgstr "Ïîçâîëćíî â %d ńćêóíäè"
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Slovakia"
-msgstr "Ńëîâàêèÿ"
+msgid "Please choose which serial port your modem is connected to."
+msgstr "Ìîëÿ, èçáćđćòć ńćđèćí ïîđò êúì êîéòî ńâúđçàí ìîäćìúò âè."
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Ńâàëáàđä è ßí Ìàéćí Îńòđîâè"
+msgid "Country"
+msgstr "Ńòđàíà"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Slovenia"
-msgstr "Ńëîâćíèÿ"
+msgid "Property"
+msgstr "Ńîáńòâćíîńò"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Saint Helena"
-msgstr "Ńâćòà Ćëćíà"
+msgid "Ghostscript"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Singapore"
-msgstr "Ńèíăàïóđ"
+msgid "LAN Configuration"
+msgstr "Íàńòđîéêà íà ëîêàëíà ìđćæà"
#: ../../lang.pm:1
#, c-format
-msgid "Sudan"
-msgstr "Ńóäàí"
+msgid "Ghana"
+msgstr "Ăàíà"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Seychelles"
-msgstr "Ńćéűćëè"
+msgid "Path or Module required"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Solomon Islands"
-msgstr "Ńîëîìîíîâè Îńòđîâè"
+msgid "Advanced Options"
+msgstr "Äîïúëíèòćëíè îïöèè"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Saudi Arabia"
-msgstr "Ńàóäèòńêà Àđàáèÿ"
+msgid "Coma bug"
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Rwanda"
-msgstr "Đóàíäà"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
+"Â òîçè ìîìćíò òđÿáâà äà èçáćđćòć êîé äÿëîâć äà áúäàò èçïîëçâàíè çà "
+"èíńòàëàöèÿ\n"
+"íà âàűàòà Mandrake Linux ńèńòćìà. Àêî äÿëîâćòć âćść ńà îïđćäćëćíè, äàëè îò\n"
+"ïđćäèűíà èíńòàëàöèÿ íà GNU/Linux èëè îò äđóă èíńòđóìćíò çà đàçäćëÿíć, "
+"ìîæćòć\n"
+"äà èçïîëçâàòć ńúùćńòâóâàùèòć äàëîâć. Â ïđîòèâćí ńëóśàé òđÿáâà äà îïđćäćëèòć\n"
+"äÿëîâć îò òâúđäèÿ äèńê.\n"
+"\n"
+"Çà äà ńúçäàäćòć äÿëîâć, òđÿáâà ïúđâî äà èçáćđćòć òâúđä äèńê. Ìîæćòć äà\n"
+"èçáćđćòć äèńê çà đàçäćëÿíć, êàòî öúêíćòć íà \"hda\" çà ïúđâî IDE "
+"óńòđîéńòâî,\n"
+"\"hdb\" çà âòîđîòî, \"sda\" çà ïúđâî SCSI óńòđîéńòâî è ò.í..\n"
+"\n"
+"Çà äà đàçäćëèòć èçáđàíèÿ òâúđ äèńê, ìîæćòć äà èçïîëçâàòć ńëćäíèÿ îïöèè:\n"
+"\n"
+" * \"Èçśèńòè âńèśêî\": òàçè îïöèÿ èçòđèâà âńèśêè äÿëîâć íà èçáđàíèÿ äèńê.\n"
+"\n"
+" * \"Àâòîìàòèśíî ńúçäàâàíć\": òàçè îïöèÿ ïîçâîëÿâà àâòîìàòèśíî äà ńúçàäćòć\n"
+"Ext2 è swap äÿëîâć â ńâîáîäíîòî ïđîńòđàíńòâî íà òâúđäèÿ âè äèńê.\n"
+"\n"
+" * \"Ńïàńè òàáëèöàòà ń äÿëîâć\": àêî òàáëèöàòà ń äÿëîâć ć ïîâđćäćíà, ìîæćòć\n"
+"äà ńć îïèòàòć äà ÿ âúçńòàíîâèòć ń òàçè îïöèÿ. Ìîëÿ, áúäćòć âíèìàòćëíè è\n"
+"ïîìíćòć, ść ìîæć äà íć ńòàíć.\n"
+"\n"
+" * \"Âúđíè\": èçïîëçâàéòć òàçè îïöèÿ, çà äà îòìćíèòć ïđîìćíèòć.\n"
+"\n"
+" * \"Ïđćçàđćäè\": ìîæćòć äà èçïîëçâàòć òàçè îïöèÿ, àêî èńêàòć äà âúđíćòć\n"
+"âńèśêè ïđîìćíè è äà çàđćäèòć ïúđâîíàśàëíàòà òàáëèöà ń äÿëîâć.\n"
+"\n"
+" * \"Ìàăüîńíèê\": èçïîëçâàéòć òàçè îïöèÿ, àêî èńêàòć äà èçïîëçâàòć "
+"ìàăüîńíèê,\n"
+"äà đàçäćëè òâúđäèÿ âè äèńê. Òîâà ńć ïđćïîđúśâà, àêî íÿìàòć äîńòàòúśíî "
+"ïîçíàíèÿ\n"
+"çà đàçäćëÿíćòî.\n"
+"\n"
+" * \"Âúçńòàíîâè îò äèńêćòà\": òàçè îïöèÿ ùć âè ïîçâîëè äà âúçńòàíîâèòć "
+"çàïàçćíà\n"
+"ïđćäè òîâà íà äèńêćòà òàáëèöà ń äÿëîâć.\n"
+"\n"
+" * \"Çàïàçè íà äèńêćòà\": çàïàçâà òàáëèöàòà ń äÿëîâć íà äèńêćòà. Ïîëćçíî ć "
+"ïđè\n"
+"ćâćíòóàëíî âúçńòàíîâÿâàíć íà òàáëèöàòà ïđè íćîáőîäèìîńò. Ńèëíî ńć "
+"ïđćïîđúśâà\n"
+"äà íàïđàâèòć òîâà.\n"
+"\n"
+" * \"Ăîòîâî\": êîăàòî ńòć ńâúđűèëè ń đàçäćëÿíćòî íà òâúđäèÿ ńè äèńê, òîâà "
+"ùć\n"
+"çàïèűć ïđîìćíèòć âúđőó äèńêà.\n"
+"\n"
+"Çàáćëćæćòà: ìîæćòć äà äîńòèăíćòć âńÿêà îïöèÿ èçïîëçâàéêè êëàâèàòóđàòà.\n"
+"Ìèíàâàéòć ïđćç äÿëîâćòć èçïîëçâàéêè [Tab} è ńòđćëêèòć íàăîđć/íàäîëó.\n"
+"\n"
+"Êîăàòî ć èçáđàí äÿë, ìîæćòć äà èçïîëçâàòć:\n"
+"\n"
+" * Ctrl-c, çà äà ńúçäàäćòć íîâ äÿë (àêî ć èçáđàí ïđàçćí äÿë);\n"
+"\n"
+" * Ctrl-d, çà äà èçòđèćòć äÿë;\n"
+"\n"
+" * Ctrl-m, çà äà óńòàíîâèòć òîśêà íà ìîíòèđàíć.\n"
+"\n"
+"Àêî èíńòàëèòć íà PPC ìàűèíà, ńèăóđíî ùć èńêàòć äà ńúçäàäćòć ìàëúê HFS\n"
+"\"bootstrap\" äÿë îò ïîíć 1 ÌÁ, êîéòî ùć áúäć èçïîëçâàò îò boot loader-úò\n"
+"yaboot. Àêî ńìÿòàòć äà íàïđàâèòć äÿëà ïî-ăîëÿì, íàïđèìćđ 50 ÌÁ, ìîæćòć äà "
+"ăî\n"
+"íàìćđèòć çà ïîëćçíî ìÿńòî, êúäćòî äà ńúőđàíÿâàòć íÿêîć ÿäđî èëè image íà\n"
+"ramdisk â ńëóśàé íà èçâúíđćäíè ńèòóàöèè."
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Russia"
-msgstr "Đóńèÿ"
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Romania"
-msgstr "Đóìúíèÿ"
+msgid "There was an error installing packages:"
+msgstr "Ïîÿâè ńć ăđćűêà ïđè èíńòàëèđàíć íà ïàêćòèòć:"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Reunion"
-msgstr "Đèțíèúí"
+msgid "Lexmark inkjet configuration"
+msgstr "Íàńòđîéêà íà Lexmark inkjet"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Qatar"
-msgstr "Êàòàđ"
+msgid "Undo"
+msgstr "Âúđíè"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Palau"
-msgstr "Ïàëàó"
+msgid "Save partition table"
+msgstr "Çàïàçè òàáëèöàòà ń äÿëîâćòć"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Paraguay"
-msgstr "Ïàđàăâàé"
+msgid "Finnish"
+msgstr "Ôèíëàíäńêà"
#: ../../lang.pm:1
#, c-format
-msgid "Portugal"
-msgstr "Ïîđòóăàëèÿ"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Palestine"
-msgstr "Çàïàçè èçáîđ íà ïàêćòè"
+msgid "Macedonia"
+msgstr "Ìàêćäîíèÿ"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Puerto Rico"
-msgstr "Ïóćđòî Đèêî"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
+"Ńïîäćëÿíćòî íà ïîòđćáèòćëńêè äèđćêòîđèè èçïîëçâà ăđóïà \"fileshare\".\n"
+"Ìîæć äà èçïîëçâàòć userdrake,çà äà äîáàâèòć ïîòđćáèòćë êúì òàçè ăđóïà."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Pitcairn"
-msgstr "Ïèòêćúđí"
+msgid "Slovenian"
+msgstr "Ńëîâćíńêà"
#: ../../lang.pm:1
#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "Ńâćòè Ïèćđ è Ìèêćëîí"
+msgid "Libya"
+msgstr "Ëèáèÿ"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Poland"
-msgstr "Ïîëűà"
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr ""
+"Íàńòđîéâàùè ńêđèïòîâć, èíńòàëèđàíć íà ńîôòóćđ, ńòàđòèđàíć íà ńúđâúđè..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Pakistan"
-msgstr "Ïàêèńòàí"
+msgid ""
+"\n"
+"- Burn to CD"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Philippines"
-msgstr "Ôèëèïèíè"
+msgid "Table"
+msgstr "Òàáëèöà"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Papua New Guinea"
-msgstr "Ïàïóà Íîâà Ăâèíćÿ"
+msgid "I don't know how to format %s in type %s"
+msgstr "íć çíàì êàê äà ôîđìàòèđàì %s â òèï %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "French Polynesia"
-msgstr "Ôđćíńêà Ïîëèíćçèÿ"
+msgid "Model"
+msgstr "Ìîäćë"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Peru"
-msgstr "Ïćđó"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Panama"
-msgstr "Ïàíàìà"
+msgid "Stop Server"
+msgstr "Ńïèđà ńúđâúđ"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Oman"
-msgstr "Îìàí"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "New Zealand"
-msgstr "Íîâà Çćëàíäèÿ"
+msgid "Modem"
+msgstr "Ìîäćì"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Niue"
-msgstr "Íèț"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Nauru"
-msgstr "Íàóđó"
+msgid "Tuvalu"
+msgstr "Òóâàëó"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "Nepal"
-msgstr "Íćïàë"
+msgid "Use auto detection"
+msgstr "Èçïîëçâàé àâòîìàòèśíî çàńèśàíć"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Nicaragua"
-msgstr "Íèêàđàăóà"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr ""
+"GPM äîáàâÿ ïîääđúæêà íà ìèűêà â òćêńòîâî-áàçèđàíèòć Linux ïđèëîæćíèÿ êàòî\n"
+"Midnight Commander. Ńúùî òàêà ïîçâîëÿâà áàçèđàíèòć íà ìèűêà êîíçîëè\n"
+"đćæè-è-ëćïè îïćđàöèè, è âêëțśâà ïîääđúæêà íà èçêàśàùè ìćíțòà íà êîçîëàòà."
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Nigeria"
-msgstr "Íèăćđèÿ"
+msgid "Started on boot"
+msgstr "Ïóńíàò ïđè ńòàđòèđàíć"
-#: ../../lang.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Norfolk Island"
-msgstr "Íîđôîëê Îńòđîâ"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Niger"
-msgstr "Íèăćđ"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New Caledonia"
-msgstr "Íîâà Êàëćäîíèÿ"
+msgid "Automatically find available printers on remote machines"
+msgstr "Àâòîìàòèśíî îòêđèâà íàëèśíèòć ïđèíòćđè íàîòäàëćśćíèòć ìàűèíè"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Namibia"
-msgstr "Íàìèáèÿ"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Mozambique"
-msgstr "Ìîçàìáèê"
+msgid "East Timor"
+msgstr "Èçòîśćí Òèìîđ"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Malaysia"
-msgstr "Ìàëàéçèÿ"
+msgid "Del profile..."
+msgstr "Èçòđîé ïđîôèë ..."
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Mexico"
-msgstr "Ìćêńèêî"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Malawi"
-msgstr "Ìàëàâè"
+msgid "Installing Foomatic..."
+msgstr "Èíńòàëèđàíć íà Foomatic..."
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Maldives"
-msgstr "Ìàëäèâè"
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "Ìîëÿ èçëćçòć îò ńćńèÿòà è èçïîëçâàéòć Ctrl-Alt-BackSpace"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Mauritius"
-msgstr "Ìàâđèöèé"
+msgid "detected"
+msgstr "çàńćśćíà "
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Malta"
-msgstr "Ìàëòà"
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr "Ìđćæàòà ńć íóæäàć îò ïđćńòàđòèđàíć. Èńêàòć ëè äà ÿ ïđćńòàđòèđàì?"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Montserrat"
-msgstr "Ìîíńćđàò"
+msgid "Package: "
+msgstr "Ïàêćò: "
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Mauritania"
-msgstr "Ìàâđèòàíèÿ"
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr "Íć ìîăà äà ïèűà â /etc/sysconfig/bootsplash."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Martinique"
-msgstr "Ìàđòèíèêà"
+msgid "SECURITY WARNING!"
+msgstr "ÏĐĆÄÓÏĐĆÆÄĆÍÈĆ ÇÀ ŃÈĂÓĐÍÎŃÒ!"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Northern Mariana Islands"
-msgstr "Ńćâćđíè Ìàđèàíîâè Îńòđîâè"
+msgid "StarOffice"
+msgstr "StarOffice"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Mongolia"
-msgstr "Ìîíăîëèÿ"
+msgid "No, I don't want autologin"
+msgstr "Íć, íć èńêàì autologin"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Myanmar"
-msgstr "Ìèàíìàđ"
+msgid "Windows Migration tool"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Mali"
-msgstr "Ìàëè"
+msgid "All languages"
+msgstr "Èçáîđ íà ćçèê"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Macedonia"
-msgstr "Ìàêćäîíèÿ"
+msgid "Removing %s"
+msgstr "Èçòđèâàíć íà %s"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Marshall Islands"
-msgstr "Ìàđűàëîâè Îńòđîâè"
+msgid "Testing your connection..."
+msgstr "Èçïđîáâàíć íà âđúçêàòà..."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Madagascar"
-msgstr "Ìàäàăàńêàđ"
+msgid "Cache size"
+msgstr "Đàçìćđ íà êćű"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Moldova"
-msgstr "Ìîëäîâà"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
+msgstr ""
+"Ïàđîëàòà ńćăà ć âêëțśćíà, íî èçïîëçâàíćòî êàòî ìđćæîâ êîìïțòúđ íć ć "
+"ïđćïîđúśèòćëíî."
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Monaco"
-msgstr "Ìîíàêî"
+msgid "Start sector: "
+msgstr "Íàśàëćí ńćêòîđ: "
#: ../../lang.pm:1
#, c-format
-msgid "Morocco"
-msgstr "Ìàđîêî"
+msgid "Congo (Brazzaville)"
+msgstr "Êîíăî (Áđàçèâèë)"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "Libya"
-msgstr "Ëèáèÿ"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr ""
+"Ïàêćò %s òđÿáâà äà áúäć èíńòàëèđàí\n"
+"Èńêàòć äà ăî èíńòàëèđàòć?"
#: ../../lang.pm:1
#, c-format
-msgid "Latvia"
-msgstr "Ëàòâèÿ"
+msgid "Seychelles"
+msgstr "Ńćéűćëè"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Luxembourg"
-msgstr "Ëțêńćìáóđă"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lithuania"
-msgstr "Ëèòâà"
+msgid "Bad password on %s"
+msgstr "Ëîűà ïàđîëà íà %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lesotho"
-msgstr "Ëćńîòî"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
+msgstr ""
+"\n"
+"Èìà ćäèí íćèçâćńòćí ïđèíòćđ âêëțśćí êúì âàűàòà ńèńòćíìà"
#: ../../lang.pm:1
#, c-format
-msgid "Liberia"
-msgstr "Ëèáćđèÿ"
+msgid "Zambia"
+msgstr "Çàìáèÿ"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Sri Lanka"
-msgstr "Űđè Ëàíêà"
+msgid "Security Administrator (login or email)"
+msgstr "Àäìèíèńòđàòîđ ïî ńèăóđíîńòòà (ëîăèí èëè Ćë.ïîùà)"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Liechtenstein"
-msgstr "Ëèőòćíùàéí"
+msgid "Sorry, we support only 2.4 kernels."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Saint Lucia"
-msgstr "Ńàíòà Ëóśèÿ"
+msgid "Romanian (qwerty)"
+msgstr "Đóìúíńêà (qwerty)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lebanon"
-msgstr "Ëèâàí"
+msgid "Under Devel ... please wait."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Laos"
-msgstr "Ëàîń"
+msgid "Czech Republic"
+msgstr "Śćűêà Đćïóáëèêà"
#: ../../lang.pm:1
#, c-format
-msgid "Kazakhstan"
-msgstr "Êàçàőńòàí"
+msgid "Egypt"
+msgstr "Ćăèïćò"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Cayman Islands"
-msgstr "Êàéìàíîâè Îńòđîâè"
+msgid "Old configuration (isdn4net)"
+msgstr "Ńòàđà íàńòđîéêà (isdn4net)"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Kuwait"
-msgstr "Êóâćéò"
+msgid "Sound card"
+msgstr "Çâóêîâà êàđòà"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Korea"
-msgstr "Êîđćÿ"
+msgid "Import Fonts"
+msgstr "Èìïîđòèđò íà űđèôòîâć"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Korea (North)"
-msgstr "Êîđćÿ (Ńćâćđíà)"
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+"Èìàòć ćäèí ăîëÿì FAT äÿë\n"
+"(ïî ïđèíöèï ńć ïîëçâàò îò Microsoft Dos/Windows).\n"
+"Ïđćäëàăàì ïúđâî äà ïđîìćíèòć ăîëćìèíàòà íà òîçè äÿë\n"
+"(ùđàêíćòć âúđőó íćăî, à ńëćä òîâà ùđàêíćòć âúđőó \"Ïđîìćíè ăîëćìèíàòà\")"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "Ńâćòè Êèòń è Íćâèń"
+msgid "Suppress Temporary Files"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Comoros"
-msgstr "Êîìîđè"
+msgid "Change partition type"
+msgstr "Ïđîìÿíà òèïà íà äÿëà"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Kiribati"
-msgstr "Êèđèáàòè"
+msgid ""
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Cambodia"
-msgstr "Êàìáîäæà"
+msgid "Network Options"
+msgstr "Ìđćæîâè îïöèè"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Kyrgyzstan"
-msgstr "Êèđăèçòàí"
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
+"Ïîêàçâà òćìà\n"
+"íà êîíçîëà"
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Kenya"
-msgstr "Êćíèÿ"
+msgid "Statistics"
+msgstr "Ńòàòèńòèêè"
-#: ../../lang.pm:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Japan"
-msgstr "ßïîíèÿ"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Jordan"
-msgstr "Éîđäàíèÿ"
+msgid "(on %s)"
+msgstr "(íà %s)"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Jamaica"
-msgstr "ßìàéêà"
+msgid "MM Series"
+msgstr "MM Series"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Iceland"
-msgstr "Èńëàíäèÿ"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr ""
+"Áèáëèîòćêà, êîÿòî îńèăóđÿâà çàùèòà îò aòàêè ń ïđćïúëâàíć íà áóôćđ è ôîđìàòíè "
+"ńòđèíăîâć."
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Iran"
-msgstr "Èđàí"
+msgid "average"
+msgstr "ńđćäíî"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Iraq"
-msgstr "Èđàê"
+msgid "New printer name"
+msgstr "Íîâî èìć íà ïđèíòćđ"
#: ../../lang.pm:1
#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "Àíăëèéńêè òćđèòîđèè â Èíäèéńêèÿ îêćàí"
+msgid "Equatorial Guinea"
+msgstr "Ćêâàòîđèàëíà Ăâèíćÿ"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "India"
-msgstr "Èíäèÿ"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Ïîçâîëÿâà/Çàáđàíÿâà àâòîìàòèśíî âëèçàíć."
-#: ../../lang.pm:1
-#, c-format
-msgid "Israel"
-msgstr "Èçđàćë"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Build Backup"
+msgstr "Ëîű backup-ôàéë"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ireland"
-msgstr "Èđëàíäèÿ"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
+"Çà äà îòïćśàòàòć ôàéë îò êîìàíäíèÿ đćä (òćđìèíàëćí ïđîçîđćö), èçïîëçâàéòć "
+"êîìàíäàòà \"%s <file>\" èëè \"%s <file>\".\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Indonesia"
-msgstr "Èíäîíćçèÿ"
+msgid "Currently, no alternative possibility is available"
+msgstr "Çà ńćăà, íÿìà íàëèśíà àëòćđíàòèâà"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Hungary"
-msgstr "Óíăàđèÿ"
+msgid "Romanian (qwertz)"
+msgstr "Đóìúíńêà (qwertz)"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Haiti"
-msgstr "Őàèòè"
+msgid "Write Config"
+msgstr "Çàïèńâà íàńòđîéêà"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Croatia"
-msgstr "Őúđâàòèÿ"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+"touted äćìîíà ïîçâîëÿâà òàáëèöà çà IP đóòèđàíć àâòîìàòèśíî îáíîâÿâàíà śđćç\n"
+"RIP ïđîòîêîëà. Äîêàòî RIP ć űèđîêî èçïîëçâàíà çà ìàëêè ìđćæè, çà ïî-ńëîæíè\n"
+"ïđîòîêîëè çà đóòèđàíć ńà íóæíè çà ńëîæíè ìđćæè. "
#: ../../lang.pm:1
#, c-format
-msgid "Honduras"
-msgstr "Őîíäóđàń"
+msgid "Kiribati"
+msgstr "Êèđèáàòè"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Őúđä è ÌàêÄîíàëä Îńòđîâè"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Ïîçâîëÿâà/Çàáđàíÿâà îòäàëćśćíî âëèçàíć íà root."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Hong Kong"
-msgstr "Őîíă Êîíă"
+msgid "Browse"
+msgstr "Ïđćăëćä"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "China"
-msgstr "Êèòàé"
+msgid "CDROM"
+msgstr "CDROM"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Guyana"
-msgstr "Ăèÿíà"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "Èńêàòć ëè ńćăà äà îïèòàòć âđúçêà êúì Èíòćđíćò ?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Guinea-Bissau"
-msgstr "Ăâèíćÿ-Áèńàó"
+msgid "Belgian"
+msgstr "Áćëăèéńêà"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Guam"
-msgstr "Ăóàì"
+msgid "Do you have an ISA sound card?"
+msgstr "Èìàòć ëè ISA çâóêîâà êàđòà?"
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Guatemala"
-msgstr "Ăâàòćìàëà"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
+msgstr ""
+"Íć áćűć íàìćđćí ìđćæîâ àäàïòćđ â ńèńòćìàòà âè.\n"
+"Íć ìîæćòć äà íàńòđîèòć òàêúâ âèä âđúçêà."
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "Țæíè Ńàíäâèśćâè Îńòđîâè è Țæíà Äæîđäæèÿ"
+msgid "Windows"
+msgstr "Windows"
-#: ../../lang.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Equatorial Guinea"
-msgstr "Ćêâàòîđèàëíà Ăâèíćÿ"
+msgid "Can't make screenshots before partitioning"
+msgstr "Íć ìîăà äà íàïđàâÿ ìîìćíòíà \"ńíèìêà\" ïđćäè đàçäćëÿíćòî íà äèńêà "
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Guadeloupe"
-msgstr "Ăâàäćëóïà"
+msgid "Host Name"
+msgstr "Èìć íà őîńò"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Guinea"
-msgstr "Ăâèíćÿ"
+msgid "/File/Save _As"
+msgstr "/Ôàéë/Çàïèń _êàòî"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Gambia"
-msgstr "Ăàìáèÿ"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Greenland"
-msgstr "Ăđćíëàíäèÿ"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr "%s íć ć â áàçàòà äàííè íà ńêćíćđà, äà êîíôèăóđèđàì đúśíî?"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Gibraltar"
-msgstr "Ăèáđàëòàđ"
+msgid "Delay before booting default image"
+msgstr "Çàáàâÿíć ïđćäè ńòàđòèđàíćòî íà ïîäđàçáèđàùèÿò îáđàç"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Ghana"
-msgstr "Ăàíà"
+msgid "Restrict command line options"
+msgstr "Îăđàíèśè îïöèèòć, çàäàâàíè îò êîìàíäíèÿ đćä"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "French Guiana"
-msgstr "Ôđćíńêà Ăâèàíà"
+msgid "East Europe"
+msgstr "Èçòîśíà Ćâđîïà"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Georgia"
-msgstr "Ăđóçèÿ"
+msgid "Use free space"
+msgstr "Èçïîëçâàé ńâîáîäíîòî ìÿńòî"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Grenada"
-msgstr "Ăđćíàäà"
+msgid "use dhcp"
+msgstr "èçïîëçâàé DHCP"
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "United Kingdom"
-msgstr "Àíăëèÿ"
+msgid "Mail alert"
+msgstr "Ïîäđćäáà íà ïîùà"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Gabon"
-msgstr "Ăàáîí"
+msgid "Internet configuration"
+msgstr "Íàńòđîéêà íà Èíòćđíćò"
#: ../../lang.pm:1
#, c-format
-msgid "Faroe Islands"
-msgstr "Îńòđîâè Ôàđî"
+msgid "Uzbekistan"
+msgstr "Óçáćêèńòàí"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Micronesia"
-msgstr "Ìèêđîíćçèÿ"
+msgid "Detected %s"
+msgstr "Çàńćśćí %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Ôîëêëćíäńêè Îńòđîâè (Ìàëâèíè)"
+msgid "/Autodetect _printers"
+msgstr "/Àâòîìàòèśíî îòêđèâà _ïđèíòćđè"
-#: ../../lang.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "Fiji"
-msgstr "Ôèäæè"
+msgid "Finish"
+msgstr "Çàâúđűè"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Finland"
-msgstr "Ôèíëàíäèÿ"
+msgid "Show automatically selected packages"
+msgstr "Ïîêàæè àâòîìàòèśíî îòáćëÿçàíèòć ïàêćòè"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Ethiopia"
-msgstr "Ćòèîïèÿ"
+msgid "CPU flags reported by the kernel"
+msgstr "Ôëàăîâć íà CPU ńúîáùćíè îò ÿäđîòî"
#: ../../lang.pm:1
#, c-format
-msgid "Spain"
-msgstr "Èńïàíèÿ"
+msgid "Togo"
+msgstr "Òîăî"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Eritrea"
-msgstr "Ćđèòđćÿ"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr "Íćùî áćűć ăđćűíî! - Äàëè mkisofs ć èíńòàëèđàí?"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Western Sahara"
-msgstr "Çàïàäíà Ńàőàđà"
+msgid "16 MB"
+msgstr "16 ÌÁ"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Egypt"
-msgstr "Ćăèïćò"
+msgid "Please try again"
+msgstr "Ìîëÿ, îïèòàéòć îòíîâî"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Estonia"
-msgstr "Ćńòîíèÿ"
+msgid "The model is correct"
+msgstr "Òîçè ìîäćë ć ïđàâèëćí"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Ecuador"
-msgstr "Ćêâàäîđ"
+msgid "FAT resizing failed: %s"
+msgstr "Íćóńïćűíî ïđćđàçäćëÿíć íà FAT: %s"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Algeria"
-msgstr "Àëæèđ"
+msgid "Individual package selection"
+msgstr "Èçáèđàíć íà ïàêćòè ćäèí ïî ćäèí"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Dominican Republic"
-msgstr "Äîìèíèêàíńêà Đćïóáëèêà"
+msgid "This partition is not resizeable"
+msgstr "Ăîëćìèíàòà íà äÿëà íć ìîæć äà áúäć ïđîìćíćíà"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Dominica"
-msgstr "Äîìèíèêà"
+msgid "Location"
+msgstr "Ìćńòîïîëîæćíèć"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Denmark"
-msgstr "Äàíèÿ"
+msgid "USA (cable-hrc)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Djibouti"
-msgstr "Äæèáóòè"
+msgid "Journalised FS"
+msgstr "Æóđíàëíà FS"
#: ../../lang.pm:1
#, c-format
-msgid "Cyprus"
-msgstr "Êèïúđ"
+msgid "Guatemala"
+msgstr "Ăâàòćìàëà"
-#: ../../lang.pm:1
-#, c-format
-msgid "Christmas Island"
-msgstr "Êîëćäíè Îńòđîâè"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "This machine"
+msgstr "(íà òàçè ìàűèíà)"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cape Verde"
-msgstr "Êàïî Âćđäć"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "Áóêâà íà óńòđîéńòâîòî ïîä DOS: %s (ïđîńòî ïđćäïîëîæćíèć)\n"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Cuba"
-msgstr "Êóáà"
+msgid "Select the files or directories and click on 'OK'"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Colombia"
-msgstr "Êîëóìáèÿ"
+msgid "Bahrain"
+msgstr "Áàőđćéí"
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Cameroon"
-msgstr "Êàìćđóí"
+msgid "omit scsi modules"
+msgstr "áćç scsi ìîäóëè"
-#: ../../lang.pm:1
-#, c-format
-msgid "Chile"
-msgstr "Śèëè"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr "ôàìèëèÿ cpu (íàïđ: 6 çà i686 êëàń)"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Cook Islands"
-msgstr "Îńòđîâè Êóê"
+msgid ""
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
+msgstr ""
+"Òúé êàòî ïđàâèòć ìđćæîâà èíńòàëàöèÿ, ìđćæàòà âè âćść ć íàńòđîćíà.\n"
+"Öúêíćòć Ok, çà äà çàïàçèòć íàńòđîéêàòà, èëè Îòìÿíà, çà äà ïđćíàńòîèòć "
+"Èíòćđíćò è ìđćæîâàòà ńè âđúçêà.\n"
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Cote d'Ivoire"
-msgstr "Êîò ä'èâîàđ"
+msgid "Keyboard layout: %s\n"
+msgstr "Òèï êëàâèàòóđà: %s\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Switzerland"
-msgstr "Űâćéöàđèÿ"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
+"Òóê ìîæć äà đćűèòć äàëè ïđèíòćđèòć ńâúđçàíè êúì âàűàòà ìàűèíà ùć áúäàò "
+"äîńòúïíè îò îòäàëćśćíèòć ìàűèíè è îò êîé."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Congo (Brazzaville)"
-msgstr "Êîíăî (Áđàçèâèë)"
+msgid "Maltese (US)"
+msgstr "Ìàëòèéńêà (US)"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Central African Republic"
-msgstr "Öćíòđàëíîàôđèêàíńêà Đćïóáëèêà"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"Ìîíòèđà è äćìîíòèđà âńÿêàêâè Network File System (NFS), SMB (LAN\n"
+"Manager/Windows), è NCP (NetWare)."
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Congo (Kinshasa)"
-msgstr "Êîíăî (Êèíűàńà)"
+msgid "Tvcard"
+msgstr "TV êàđòà"
-#: ../../lang.pm:1
-#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Êîêîńîâè Îńòđîâè"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Toggle between normal/expert mode"
+msgstr "Ïđćìèíè â Íîđìàëćí đćæèì"
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Canada"
-msgstr "Êàíàäà"
+msgid "Size"
+msgstr "Ăîëćìèíà"
-#: ../../lang.pm:1
-#, c-format
-msgid "Belize"
-msgstr "Áćëèç"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "GRUB"
+msgstr "ĂÁ"
#: ../../lang.pm:1
#, c-format
-msgid "Belarus"
-msgstr "Áćëàđóń"
+msgid "Greenland"
+msgstr "Ăđćíëàíäèÿ"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Botswana"
-msgstr "Áîòńâàíà"
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bouvet Island"
-msgstr "Îńòđîâ Áóâćò"
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Bhutan"
-msgstr "Áóòàí"
+msgid ""
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
+msgstr ""
+"Óńòàíîâêàòà íà Ńïîäćëÿíćòî íà Èíòćđíćò âđúçêàòà ć çàâúđűćíà.\n"
+"Â ìîìćíòà ć âêëțśćíà.\n"
+"\n"
+"Êàêâî èńêàòć äà íàïđàâèòć ?"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Bahamas"
-msgstr "Áàőàìè"
+msgid "Delete All NBIs"
+msgstr "Èçòđèâà âńèśêè NBI"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Brazil"
-msgstr "Áđàçèëèÿ"
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Bolivia"
-msgstr "Áîëèâèÿ"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Brunei Darussalam"
-msgstr "Áđóíćé"
+msgid "Which configuration of XFree do you want to have?"
+msgstr "Êîÿ íàńòđîéêà íà XFree èńêàòć äà èìàòć ?"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Bermuda"
-msgstr "Áćđìóäà"
+msgid "More"
+msgstr "Îùć"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Benin"
-msgstr "Áćíèí"
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+"Ń òîâà íèâî íà ńèăóđíîńò, ïîëçâàíćòî íà ńèńòćìàòà êàòî ńúđâúđ ńòàâà "
+"âúçìîæíî.\n"
+"Ńèăóđíîńòòà ńćăà ć äîńòàòúśíî ăîëÿìà äà ńć èçïîëçâà ńèńòćìàòà êàòî\n"
+"ńúđâúđ ïđèćìàù âđúçêè îò ìíîăî êëèćíòè. "
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Burundi"
-msgstr "Áóđóíäè"
+msgid "Account Password"
+msgstr "Ïàđîëà íà àêàóíòà"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Bahrain"
-msgstr "Áàőđćéí"
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
+msgstr ""
+"Èçáàőòć äà èíńòàëèđàòć bootloader íà äÿë\n"
+"Òîâà ïđćäïîëàăà,ść âćść èìàòć bootloader íà äèńêà(íàïđèìćđ: System "
+"Commander).\n"
+"\n"
+"Îò êîé äèńê çàđćæäàòć ?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Bulgaria"
-msgstr "Áúëăàđèÿ"
+msgid "Tajik keyboard"
+msgstr "Òàäæèêèńòàíńêà êëàâèàòóđà"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Burkina Faso"
-msgstr "Áóđêèíà Ôàńî"
+msgid ""
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
+msgstr ""
+"Ìîæćòć äà êîïèđàòć íàńòđîéêèòć íà ïđèíòćđà, êîèòî ńòć èçâúđűèëè çà spoller %"
+"s íà %s, òćêóùèÿ spooler. Öÿëàòà èíôîđìàöèÿ çà íàńòđîéêèòć (èìć íć ïđèíòćđ, "
+"îïèńàíèć, ìćńòîïîëîæćíèć, âèä íà âđúçêàòà è íàńòđîéêè ïî ïîäđàçáèđàíć) ńć "
+"ïđćçàïèńâàò, íî đàáîòèòć íć ńć ïđćőâúđëÿò.\n"
+"Íć âńèśêè îïàűêè ìîăàò äà áúäàò ïđćőâúđëćíè ïî ńëćäíèòć ïđèśèíè:\n"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Bangladesh"
-msgstr "Áàíăëàäćű"
+msgid "Font List"
+msgstr "Ńïèńúê űđèôòîâć"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Barbados"
-msgstr "Áàđáàäîń"
+msgid ""
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
+msgstr ""
+"Ìîæć áè ńć íóæäàćòć äà ïđîìćíèòć Open Firmware ńòàđòîâîòî óńòđîéńòâî,\n"
+" çà äà ïóńíćòć çàđćæäàùàòà ïđîăđàìà. Àêî íć âèæäàòć ïîäńêàçêàòà è ïđè\n"
+" đćńòàđòèđàíć, çàäđúæòć Command-Option-O-F ïđè đćńòàđòèđàíć è âúâćäćòć:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Ńëćä êîćòî íàïèűćòć: shut-down\n"
+"Ïđè ńëćäâàùîòî đćńòàđòèđàíć áè òđÿáâàëî äà âèäćòć ïîäńêàçêàòà."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Áîńíà è Őćđöćăîâèíà"
+msgid ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
+msgstr ""
+"Èçăëćæäà èìàòć ńòàđîâđćìńêà èëè íćèçâćńòíà\n"
+"ìàűèíà, íà êîÿòî yaboot íÿìà äà ïđîđàáîòè.\n"
+"Èíńòàëàöèÿòà ùć ïđîäúëæè, íî ùć òđÿáâà\n"
+"äà èïîëçâàòć BootX, çà äà ńòàđòèđàòć ìàűèíàòà ńè"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Azerbaijan"
-msgstr "Àçćđáàéäæàí"
+msgid "Select file"
+msgstr "Èçáćđćòć ôàéë"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Aruba"
-msgstr "Àđóáà"
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
+msgstr "Èçáîđ íà ìđćæà èëè őîńò çà êîéòî ëîêàëíèÿò ïđèíòćđ ùć áúäć đàçđćűćí:"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Australia"
-msgstr "Àâńòđàëèÿ"
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr ""
+"Ìîæćòć äà èçïîëçâàòć òàçè êîìàíäà è â ïîëćòî \"Êîìàíäà çà ïćśàò\" íà "
+"ïćśàòíèòć äèàëîçè â ìíîƒî ïđèëîæćíèÿ. Íî òąê íć ïîńòàâÿéòć èìćòî íà ôàéëà, "
+"çàùîòî òî ńć ïîäàâà îò ïđèëîæćíèćòî.\n"
#: ../../lang.pm:1
#, c-format
-msgid "American Samoa"
-msgstr "Àìćđèêàíńêà Ńàìîà"
-
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
-#, c-format
-msgid "Argentina"
-msgstr "Àđæćíòèíà"
+msgid "Japan"
+msgstr "ßïîíèÿ"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Antarctica"
-msgstr "Àíòàđêòèêà"
+msgid "Print option list"
+msgstr "Ńïèńúê ń ïđèíòćđíè îïöèè"
-#: ../../lang.pm:1
+#: ../../standalone/localedrake:1
#, c-format
-msgid "Angola"
-msgstr "Àíăîëà"
+msgid "The change is done, but to be effective you must logout"
+msgstr "Ïđîìćíèòć ńà çàïàçćíè, íî çà äà áúäàò ćôćêòèâíè òđÿáâà äà èçëćçćòć"
-#: ../../lang.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Netherlands Antilles"
-msgstr "Őîëàíäńêè Àíòèëè"
+msgid "Search servers"
+msgstr "Òúđńè ńúđâúđè"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Armenia"
-msgstr "Àđìćíèÿ"
+msgid "NCP queue name missing!"
+msgstr "Ëèïńâà èìć íà NCP îïàűêà !"
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Albania"
-msgstr "Àëáàíèÿ"
+msgid ""
+"Warning, another internet connection has been detected, maybe using your "
+"network"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Anguilla"
-msgstr "Àíăèëà"
+msgid "Cd-Rom labeled \"%s\""
+msgstr "CD-ROM îçàăëàâćí \"%s\""
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Àíòèăóà è Áàđáóäà"
+msgid ""
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
+msgstr ""
+"Çàïàçâà è âúçńòàíîâÿòà ïîòîêà íà ńèńòćìíà ćíòđîïèÿ çà ïî-ăîëÿìî êàśćńòâî\n"
+"íà ïđîèçâîëíî ăćíćđèđàíć íà śèńëà."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "United Arab Emirates"
-msgstr "Îáćäèíćíè Àđàáńêè Ćìèđńòâà"
+msgid ""
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
+msgstr ""
+"Íćóńïćűíà ïđîâćđêà íà ôàéëâà ńèńòćìà %s. Èńêàòć ëè äà îïđàâèòć ăđćűêèòć? "
+"(áúäćòć âíèìàòćëíè, ìîæć äà çàăóáèòć äàííè)"
-#: ../../lang.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Andorra"
-msgstr "Àíäîđà"
+msgid "Turn your computer into a reliable server"
+msgstr "Ïđćâúđíćòć âàűàòà ìàűèíà â íàäćæäćí ńúđâúđ"
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Afghanistan"
-msgstr "Àôăàíèńòàí"
+msgid " (driver %s)"
+msgstr " (äđàéâćđ %s)"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
+msgid ""
+"Loopback file(s):\n"
+" %s\n"
+msgstr ""
+"Loopback ôàéë(îâć):\n"
+" %s\n"
-#: ../../loopback.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Circular mounts %s\n"
-msgstr "\"Îìàăüîńàí êđúă\" îò ìîíòèđàíèÿ: %s\n"
+msgid "I don't know"
+msgstr "Íć çíàì"
-#: ../../lvm.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Ïúđâî ïđćìàőíè ëîăèśíèòć äÿëîâî\n"
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr ", TCP/IP őîńò \"%s\", ïîđò %s"
-#: ../../modules.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
msgstr ""
-"PCMCIA ïîäđúæêàòà íÿìà ïîâćść äà ńúùćńâòóâà çà ÿäđî 2.2. Ìîëÿ, èçïîëçâàéòć "
-"2.4"
-#: ../../mouse.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "ÁÓÒÍĆÒĆ ÒÎÏŚĆÒÎ !"
+msgid ""
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
+msgstr ""
+"\n"
+"\n"
+"Âàűàòà êàđòà â ìîìćíòà èçïîëçâà %s\"%s\" äđàéâćđ (ïîäđàçáèđàù äđàéâćđ çà "
+"êàđòàòà âè ć \"%s\")"
-#: ../../mouse.pm:1
-#, c-format
-msgid "To activate the mouse,"
-msgstr "Çà äà àêòèâèđàòć ìèűêàòà ńè,"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Post Uninstall"
+msgstr "Èçőîä îò èíńòàëàöèîííàòà ïđîăđàìà"
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Please test the mouse"
-msgstr "Ìîëÿ, ïđîáâàéòć ìèűêàòà ńè"
+msgid " ("
+msgstr ""
-#: ../../mouse.pm:1
-#, c-format
-msgid "No mouse"
-msgstr "Áćç ìèűêà"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cpuid level"
+msgstr "Íèâî íà ńèăóđíîńò"
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "none"
-msgstr "íÿìà"
+msgid "Mongolian (cyrillic)"
+msgstr "Ìîíăîëńêà (êèđèëèöà)"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "3 buttons"
-msgstr "3 áóòîíà"
+msgid "Add a module"
+msgstr "Äîáàâè ìîäóëà"
-#: ../../mouse.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "2 buttons"
-msgstr "2 áóòîíà"
+msgid "Profile to delete:"
+msgstr "Ïđîôèë çà èçòđèâàíć:"
-#: ../../mouse.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "1 button"
-msgstr "1 áóòîí"
+msgid "Local measure"
+msgstr "Ëîêàëíî èçìćđâàíć"
#: ../../mouse.pm:1
#, c-format
msgid "busmouse"
msgstr "BUS ìèűêà"
-#: ../../mouse.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington THinking Mouse"
+msgid "Account Login (user name)"
+msgstr "Èìć íà àêàóíòà (ïîòćáèòćëńêî èìć)"
-#: ../../mouse.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (ńćđèéíà, îò ńòàđèÿ òèï C7)"
+msgid "Fdiv bug"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid ""
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
+msgstr ""
+"drakfirewall êîíôèăóđàöèÿ\n"
+"\n"
+"Óáćäćòć ńć, ść âèć èìàòć êîíôèăóđèđàí Èíòćđíćò/Èíòđàíćò äîńòúï ń\n"
+"drakconnect ïđćäè äà ïđàâèòć äđóăè íćùà ïî-íàòàòúê."
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "MM Series"
-msgstr "MM Series"
+msgid "Benin"
+msgstr "Áćíèí"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genuis NetMouse"
+msgid "Uruguay"
+msgstr "Óđóăâàé"
-#: ../../mouse.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "Path selection"
+msgstr "Èçáîđ íà ïúò"
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
+msgid "Name/IP address of host:"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+msgid "Monitor: %s\n"
+msgstr "Ìîíèòîđ: %s\n"
-#: ../../mouse.pm:1
+#: ../../partition_table/raw.pm:1
#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid ""
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
+msgstr ""
+"Íćùî ëîűî ńòàâà ń óńòđîéńòâîòî âè.\n"
+"Òćńòà çà öćëîńò íà äàííèòć ïđîïàäíà.\n"
+"Òîâà çíàśè, ść ïèńàíćòî íà êàêâîòî è áèëî ïî äèńêà ùć ïđćâđúùà\n"
+"ïđîèçâîëíî â áîêëóê"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "Printer host name or IP missing!"
+msgstr "Ëèïńâà èìć íà őîńò íà ïđèíòćđa èëè IP!"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Îáèêíîâćííà 3-áóòîííà ìèűêà"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check all users that you want to include in your backup."
+msgstr "Ìîëÿ, èçáćđćòć ïàêćòèòć, êîèòî èńêàòć äà èíńòàëèđàòć."
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Îáèêíîâćííà 2-áóòîííà ìèűêà"
+msgid ""
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "serial"
-msgstr "ńćđèéíà"
+msgid "Bangladesh"
+msgstr "Áàíăëàäćű"
-#: ../../mouse.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
+msgid "Japan (cable)"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Wheel"
-msgstr "Wheel"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Generic"
-msgstr "Îáù"
+msgid "Initial tests"
+msgstr "Íàśàëíè òćńòîâć"
-#: ../../mouse.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid "Continue"
+msgstr "Íàòàòúê"
-#: ../../mouse.pm:1
-#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Custom Restore"
+msgstr "Êëèćíòńêà"
-#: ../../mouse.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Îáèêíîâćííà PS2 ìèűêà"
+msgid ""
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
+msgstr ""
+"\"%s\"àêî íàìćđÿ çâóêîâà êàđòà,ùć âèäèòć ńúîáùćíèć çà òîâà.\n"
+"Àêî çàáćëćæèòć,ść íàìćđćíàòà çâóêîâà êàđòà íć îòăîâàđÿ íà èńòèíàòà,\n"
+"ìîæćòć äà öúêíćòć íà áóòîíà è äà èçáćđćòć äđóă äđàéâćđ."
-#: ../../mouse.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+msgid "Script-based"
+msgstr "Áàçèđàíà íà ńêđèïò"
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../install_any.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "Standard"
-msgstr "Ńòàíäàđòíà"
+msgid "Error reading file %s"
+msgstr "Ăđćűêà ïđè śćòćíćòî íà ôàéëà %s"
-#: ../../mouse.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Sun - Mouse"
-msgstr "Ìèűêà íà Sun"
+msgid "PLL setting:"
+msgstr "PLL íàńòđîéêè:"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Ïđćâêëțśâàíć ìćæäó íîđìàëíî è ńîđòèđàíć ïî ăđóïè"
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "Òđÿáâà äà èìàòć FAT äÿë ìîíòèđàí â /boot/efi"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Collapse Tree"
-msgstr "Èçśèńòè äúđâîòî"
+msgid " on "
+msgstr ""
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Expand Tree"
-msgstr "Đàçűèđè äúđâîòî"
+msgid "The URL must begin with http:// or https://"
+msgstr "URL òđÿáâà äà çàïîśâà ń http:// èëè https://"
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Info"
-msgstr "Èíôîđìàöèÿ"
+msgid ""
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
+msgstr ""
+"Òđÿáâà äèđćêòíî äà îïđćäćëèòć URI çà äîńòúï äî ïđèíòćđà. URI òđÿáâà äà "
+"èçïúëíè èëè CUPS èëè Foomatic ńïćöèôèêàöèèòć. Îòáćëćæćòć, ść íć âńèśêè "
+"òèïîâć URI ńć ïîääđúđæàò îò spooler-èòć."
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Is this correct?"
-msgstr "Âńèśêî ïđàâèëíî ëè ć ?"
+msgid "Other OS (SunOS...)"
+msgstr "Äđóăà ÎŃ (SunOS...)"
-#: ../../my_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgid "Install/Upgrade"
+msgstr "Èíńòàëèđàé/Îáíîâè"
-#: ../../partition_table.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Error writing to file %s"
-msgstr "Ăđćűêà ïđè çàïèń âúâ ôàéëà %s"
+msgid "%d packages"
+msgstr "%d ïàêćòà"
-#: ../../partition_table.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Bad backup file"
-msgstr "Ëîű backup-ôàéë"
+msgid ""
+"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
+"Backup and Restore application\n"
+"\n"
+"--default : save default directories.\n"
+"--debug : show all debug messages.\n"
+"--show-conf : list of files or directories to backup.\n"
+"--config-info : explain configuration file options (for non-X "
+"users).\n"
+"--daemon : use daemon configuration. \n"
+"--help : show this message.\n"
+"--version : show version number.\n"
+msgstr ""
-#: ../../partition_table.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Âúçńòàíîâÿâàíćòî îò ôàéëà %s íć óńïÿ: %s"
+msgid "Domain Authentication Required"
+msgstr "Èçèńêâà Èäćíòèôèêàöèÿ çà Äîìćéí"
-#: ../../partition_table.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"\n"
+"\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
msgstr ""
-"Èìàòć ïđàçíèíà â òàáëèöàòà ń äÿëîâćòć, íî íć ìîăà äà ÿ èçïîëçâàì.\n"
-"Ćäèíńòâćíèÿò íàśèí ć äà ïđćìćńòèòć ăëàâíèòć ńè äÿëîâć, çà äà èìàòć ïđàçíî "
-"ìÿńòî ńëćä extended-äÿëîâćòć"
+"\n"
+"\n"
+" Áëàăîäàđíîńòè:\n"
+"\t- LTSP Ïđîćêò http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
-#: ../../partition_table.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Đàçűèđćíè äÿëîâć íć ńć ïîääúđæàò íà òàçè ïëàòôîđìà"
+msgid "Costa Rica"
+msgstr "Êîńòà Đèêà"
-#: ../../partition_table.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "mount failed: "
-msgstr "ìîíòèđàíćòî íć óńïÿ: "
+msgid "Use libsafe for servers"
+msgstr "Èçïîëçâàéòć libsafe çà ńúđâúđè"
-#: ../../pkgs.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "maybe"
-msgstr "ńòàâà"
+msgid "Icelandic"
+msgstr "Èńëàíäńêà"
-#: ../../pkgs.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "nice"
-msgstr "äîáúđ"
+msgid ""
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
+"\n"
+"Èçïîëçâàíć: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
-#: ../../pkgs.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "very nice"
-msgstr "ìíîăî äîáúđ"
+msgid "Please relog into %s to activate the changes"
+msgstr "Ìîëÿ âëćçòć îòíîâî â %s, çà äà àêòèâèđàòć ïđîìćíèòć"
-#: ../../pkgs.pm:1
+#: ../../my_gtk.pm:1
#, c-format
-msgid "important"
-msgstr "âàæćí"
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-#: ../../pkgs.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "must have"
-msgstr "íóæćí"
+msgid "Lilo/grub mode"
+msgstr "Đćæèì íà Lilo/grub"
-#: ../../raid.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Íÿìà äîńòàòúśíî äÿëîâć çà RAID íèâî %d\n"
+msgid "Output"
+msgstr "Đćçóëòàò"
-#: ../../raid.pm:1
+#: ../../loopback.pm:1
#, c-format
-msgid "mkraid failed"
-msgstr "mkraid ïđîïàäíà"
+msgid "Circular mounts %s\n"
+msgstr "\"Îìàăüîńàí êđúă\" îò ìîíòèđàíèÿ: %s\n"
-#: ../../raid.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid ïđîïàäíà (ìîæć áè raidtools ëèïńâàò ?)"
+msgid "Martinique"
+msgstr "Ìàđòèíèêà"
-#: ../../raid.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Íć ìîăà äà ïđèáàâÿ äÿë êúì _ôîđìàòèđàí_ RAID md%d"
+msgid "HardDrive / NFS"
+msgstr "Òâúđä äèńê / NFS"
-#: ../../services.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Stop"
-msgstr "Ńòîï"
+msgid "a number"
+msgstr "íîìćđ"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Start"
-msgstr "Ńòàđò"
+msgid "Swedish"
+msgstr "Űâćäńêà"
-#: ../../services.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "On boot"
-msgstr "Ïđè çàđćæäàíć"
+msgid "Which %s driver should I try?"
+msgstr "Êîé %s äđàéâćđ äà ïđîáâàì ?"
-#: ../../services.pm:1
+#: ../../standalone/logdrake:1
#, c-format
msgid ""
-"No additional information\n"
-"about this service, sorry."
+"You will receive an alert if one of the selected services is no longer "
+"running"
msgstr ""
-"Íÿìà äîïúëíèòćëíà èíôîđìàöèÿ\n"
-"çà òàçè óńëóăà, ńúæćëÿâàì."
+"Âèć ùć ïîëóśèòć òđćâîăà àêî ćäíî îò èçáđîćíèòć îáńëóæâàíèÿ íć ńć èçïúëíÿâà "
+"ïîâćść"
-#: ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Services and deamons"
-msgstr "Óńëóèăè è äćìîíè"
+msgid "Filesystem types:"
+msgstr "Âèäîâć ôàéëîâà ńèńòćìà:"
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "stopped"
-msgstr "ńïđÿíà"
+msgid ", multi-function device on HP JetDirect"
+msgstr ", ìíîăîôóíêöèîíàëíî óńòđîéńòâî íà HP JetDirect"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "running"
-msgstr "ńòàđòèđàíć"
+msgid "Northern Mariana Islands"
+msgstr "Ńćâćđíè Ìàđèàíîâè Îńòđîâè"
-#: ../../services.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Èçáèđà óńëóăèòć, êîèòî òđÿáâà äà ńć ïóńíàò ïđè ïóńêàíć íà ìàűèíàòà"
+msgid "none"
+msgstr "íÿìà"
-#: ../../services.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Database Server"
-msgstr "Ńúđâúđ Áàçè-äàííè"
+msgid "user :"
+msgstr "Ïîòđćáèòćë:"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Remote Administration"
-msgstr "Îòäàëćśćíà àäìèíèńòđàöèÿ"
+msgid "Please enter your password"
+msgstr "Ìîëÿ, âúâćäćòć âàűàòà ïàđîëà"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "File sharing"
-msgstr "Ïîäćëÿíć íà ôàéëîâć"
+msgid ""
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
+msgstr ""
+"Èìć íà ńúçäàâàíèÿ ïđîôèë (íîâèÿò ïđîôèë ńć ńúçäàâà êàòî êîïèć íà òćêóùèÿ):"
-#: ../../services.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Internet"
-msgstr "Èíòćđíćò"
+msgid "Floppy"
+msgstr "Ôëîïè"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "Ìîëÿ, öúêíćòć íà íîńèòćëÿ"
+
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Printing"
-msgstr "Ïćśàòàíć"
+msgid "Ghostscript referencing"
+msgstr ""
-#: ../../services.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Ńòàđòèđà X Font Server (òîâà ć çàäúëæèòćëíî, çà äà òđúăíć XFree)."
+msgid "Bootloader"
+msgstr "Bootloader"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Çàđćæäàíć äđàéâćđè çà âàűèòć USB óńòđîéńòâà."
+msgid "Move"
+msgstr "Ïđćìćńòè"
-#: ../../services.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
-msgstr ""
-"Syslog ć ïđîăđàìà êîÿòî ìíîăî äćìîíè èçïîëçâàò äà çàïàçâàò ńúîáùćíèÿ â\n"
-"đàçëèśíè ńèńòćìíè ôàéëîâć (ëîăîâć). Äîáđć ć ïîńòîÿííî äà ÿ èìàòć đàáîòćùà."
+msgid "Bootloader to use"
+msgstr "Èçïîëçâàíà çàđćæäàùàòà ïđîăđàìà"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Ïóńíêàíć çâóêîâàòà ńèńòćìà íà ìàűèíàòà âè"
+msgid "SMB server host"
+msgstr "Őîńò íà SMB ńúđâúđ"
-#: ../../services.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Name Servers:"
+msgstr "NIS ńúđâúđ"
+
+#: ../../install_messages.pm:1
#, c-format
msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
msgstr ""
-"rwho ïđîòîêîëà ïîçâîëÿâà íà îòäàëćśćíè ïîòđćáèòćëè äà ńć ńäîáèÿò ńúń ńïèńúê\n"
-"íà âńèśêè ïîòđćáèòćëè âëćçëè íà ìàűèíà ń đàáîòćù rwho äćìîí (ïîäîáćí íà "
-"finger)."
+"\n"
+"Âíèìàíèć\n"
+"\n"
+"Ìîëÿ, ïđîśćòćòć óńëîâèÿòà ïî-äîëó. Àêî íć ńòć ńúăëàńíè ń íÿêîć îò òÿő,\n"
+"íć ìîæćòć äà ïđîäúëæèòć èíńòàëàöèÿòà íà ńëćäâàùèÿ CD íîńèòćë. Íàòèńíćòć\n"
+"'Îòêàæè', çà äà ïđîäúëæèòć èíńòàëàöèÿòà áćç òćçè íîńèòćëè.\n"
+"\n"
+"\n"
+"Íÿêîè êîìïîíćíòè ńúäúđæàùè ńć â ńëćäâàùèÿ CD íîńèòćë íć ńà đàçïđîńòđàíÿâàò\n"
+"ïîä GPL Ëèöćíçà èëè ïîäîáćí òàêúâ. Âńćêè òàêúâ êîìïîíćíò ć ïîä óńëîâèÿòà\n"
+"è ïîëîæćíèÿòà íà ńïćöèôèśíèÿ ìó ëèöćíç. Ìîëÿ, ïđîśćòćòć âíèìàòćëíî è èçöÿëî\n"
+"òćçè ńïćöèôèśíè ëèöćíçè ïđćäè äà èçïîëçâàòć èëè đàçïđîńòđàíÿâàòć "
+"ńïîìćíàòèòć\n"
+"êîìïîíćíòè.\n"
+"Òàêèâà ëèöćíçè ïî ïđèíöèï ïđćäîòâđàòÿâà ïđćíîńà, êîïèđàíćòî (îńâćí ń öćë\n"
+"ńúőđàíćíèć), đàçïđîńòđàíÿâàíćòî, îáđàòíèÿ èíæćíćđèíă, äćàńćìáëèđàíćòî\n"
+"äćêîìïèëàöèÿòà èëè ìîäèôèêàöèÿòà íà êîìïîíćíòèòć.\n"
+"Âńÿêî íàđóűàâàíć íà ńïîăîäáàòà íćçàáàâíî ïđćóńòàíîâÿâà ïđàâàòà âè ïî\n"
+"ńïćöèôèśíèÿ ëèöćíç. Îńâćí àêî ńïćöèôèśíèÿ ëèöćíç âè äàâà òàêèâà ïđàâà,\n"
+"îáèêíîâćíî íć ìîæćòć äà èíńòàëèđàòć ïđîăđàìèòć íà ïîâćść îò ćäíà ńèńòćìà\n"
+"èëè äà ăè ïđèăàæäàòć çà èçïîëçâàíć â ìđćæà. Àêî íć ńòć ńèăóđíè, ìîëÿ\n"
+"ńâúđæćòć ńć ń äèńòđèáóöèÿ èëè đćäàêòîđà íà êîìïîíćíà.\n"
+"Ïđćőâúđëÿíćòî íà òđćòè ëèöà èëè êîïèđàíćòî íà âńÿêà êîìïîíćíòà, âêëțśèòćëíî\n"
+"íà äîêóìćíòàöèÿòà, îáèêíîâćíî ńà çàáđàíćíè.\n"
+"\n"
+"\n"
+"Âńèśêè ïđàâà íà êîìïîíćíòèòć îò ńëćäâàùèÿ CD íîńèòćë ïđèíàäëćæàò íà\n"
+"ńúîòâćòíèòć èì àâòîđè è ńà çàùèòćíè êàòî èíòćëćêòóàëíà ńîáńòâćíîńò îò\n"
+"çàêîíèòć çà àâòîđńêè ïđàâà ïđèëîæèìè çà ńîôòóćđíèòć ïđîăđàìè.\n"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers ïđîòîêîëà ïîçâîëÿâà íà ìđćæîâèòć ïîòđćáèòćëè äà ïđîâćđÿâàò êîé ć\n"
-"âëÿçúë íà äđóăà îòăîâàđÿùàòà ìàűèíà."
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Ïđćìàőâà òîçè ïđèíòćđ îò Star Office/OpenOffice.org/GIMP"
#: ../../services.pm:1
#, c-format
msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
msgstr ""
-"rstat ïđîòîêîëà ïîçâîëÿâà íà ìđćæîâèòć ïîòđćáèòćëè äà èçâëèśàò\n"
-"ïàđàìćòđèòć íà âúçìîæíîńòèòć çà âńÿêà ìàűèíà íà ìđćæàòà."
+"Linux Virtual Server ńć èçïîëçâà çà èçăđàæäàíć íà âèńîêîïđîèçâîäèòćëćí\n"
+"è äîáđć äîńòúïćí ńúđâúđ."
-#: ../../services.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"touted äćìîíà ïîçâîëÿâà òàáëèöà çà IP đóòèđàíć àâòîìàòèśíî îáíîâÿâàíà śđćç\n"
-"RIP ïđîòîêîëà. Äîêàòî RIP ć űèđîêî èçïîëçâàíà çà ìàëêè ìđćæè, çà ïî-ńëîæíè\n"
-"ïđîòîêîëè çà đóòèđàíć ńà íóæíè çà ńëîæíè ìđćæè. "
+msgid "4 billion colors (32 bits)"
+msgstr "4 ìèëèàđäà öâÿòà (32 áèòà)"
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
-msgstr ""
-"Ńâúđæè śèńòè äđàéâćđè ń áëîêîâè óńòđîéńòâà (êàòî äÿëîâć\n"
-"íà òâúđäèÿ äèńê), çà óïîòđćáÿòà îò ïđèëîæćíèÿ êàòî Oracle"
+#: ../../lang.pm:1
+#, c-format
+msgid "Micronesia"
+msgstr "Ìèêđîíćçèÿ"
-#: ../../services.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Çàïàçâà è âúçńòàíîâÿòà ïîòîêà íà ńèńòćìíà ćíòđîïèÿ çà ïî-ăîëÿìî êàśćńòâî\n"
-"íà ïđîèçâîëíî ăćíćđèđàíć íà śèńëà."
+msgid "License"
+msgstr "Ëèöćíç"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
+msgid "This may take a moment to generate the keys."
msgstr ""
-"Postfix ć Main Transport Agent (MTA), êîéòî ć ïđîăđàìà êîÿòî ïđćíàńÿ\n"
-"ïîùà îò ìàűèíà íà ìàűèíà."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper ńć ńïđàâÿ ń RPC âđúçêè, êîèòî ńć èçïîëçâàò îò ïđîòîêîëè êàòî\n"
-"NFS è NIS. portmap ńúđâúđà òđÿáâà äà ć ïóńíàò íà ìàűèíè, êîèòî đàáîòÿò êàòî\n"
-"ńúđâúđ çà ïđîòîêîëè, êîèòî ńć íóæäàÿò äà èçïîëçâàò RPC ìćőàíèçúì."
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgstr "Àâòîìàòèśíî îòêđèâàíć íà ïđèíòćđ (Ëîêàëćí, TCP/Socket, è SMB ïđćíòćđè)"
-#: ../../services.pm:1
+#: ../../network/adsl.pm:1
+#, c-format
+msgid "Sagem (using pppoa) usb"
+msgstr "Sagem (èçïîëçâà pppoa) usb"
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
-"PCMCIA ïîääúđæêàòà îáèêíîâćííî ïîääúđæà íćùà êàòî ethernet è ìîäćìè â\n"
-"laptop-è. Òîâà íÿìà äà ńć ńòàđòèđà ïđćäè äà áúäć íàńòđîćí, òàêà ść ć\n"
-"ïî-äîáđć äà ÿ èìàòć èíńòàëèđàíà íà ìàűèíè, êîèòî íć ńć íóæäàÿò îò íćÿ."
+"Ïîÿâè ńć ăđćűêà - íć ńà îòêđèòè âàëèäíè óńòđîéńòâà, âúđőó êîèòî äà áúäàò "
+"ńúçäàäćíè íîâè ôàéëîâè ńèńòćìè. Ìîëÿ ïđîâćđćòć òâúđäèÿ ńè äèńê ńè çà "
+"ïđèśèíàòà çà òîçè ïđîáëćì"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Ïîääđúæêà íà OKI 4w è ńúâìćńòèìè win-ïđèíòćđè."
+msgid "Starting the printing system at boot time"
+msgstr "Ńòàđòèđàíć íà ïđèíòćđíàòà ńèńòćìà ïđè ńòàđòèđàíć"
-#: ../../services.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Àâòîìàòèśíî âêëțśâàíć íà numlock êëàâèűà ïîä êîíçîëà è\n"
-"XFree ïđè ńòàđòèòàíć."
+msgid "Do you want to start the connection at boot?"
+msgstr "Èńêàòć ëè äà ńòàđòèđàòć âđúçêàòà ńè ïđè çàđćæäàíć ?"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS ć ïîïóëÿđćí ïđîòîêîë çà îáìćí íà ôàéëîâć ïî TCP/IP ìđćæè.\n"
-"Òàçè óńëóăà îńèăóđÿâà ôóíêöèîíàëíîńòòà íà çàêëțśâàíćòî íà NFS ôàéëîâćòć."
+msgid "Processor ID"
+msgstr "Ïđîöćńîđ ID"
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS ć ïîïóëÿđćí ïđîòîêîë çà îáìćí íà ôàéëîâć ïî TCP/IP ìđćæè.\n"
-"Òàçè óńëóăà îńèăóđÿâà ôóíêöèîíàëíîńòòà íà NFS ńúđâúđà, êîéòî ńć íàńòđîéâà\n"
-"śđćç ôàéëà /etc/exports."
+msgid "Sound trouble shooting"
+msgstr "Çàòđóäíćíèÿ ïđè çâóê"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Àêòèâèđà/äćàêòèâèđà âńèśêè ìđćæîâè èíòćđôćéńè, íàńòđîćíè äà ńć ïóńêàò\n"
-"ïđè ńòàđòèđàíć íà ìàűèíàòà."
+msgid "Polish (qwerty layout)"
+msgstr "Ïîëńêà (QWERTY íàđćäáà)"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Ìîíòèđà è äćìîíòèđà âńÿêàêâè Network File System (NFS), SMB (LAN\n"
-"Manager/Windows), è NCP (NetWare)."
+msgid "activate now"
+msgstr "àêòèâèđàé ńćăà"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
+"\n"
+"Drakbackup activities via CD:\n"
+"\n"
msgstr ""
-"named (BIND) ć Domain Name Server (DNS), êîéòî ńć èçïîëçâà äà ïđćâúđíć\n"
-"èìćòî íà őîńòà äî IP àäđćń."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
msgstr ""
-"Linux Virtual Server ńć èçïîëçâà çà èçăđàæäàíć íà âèńîêîïđîèçâîäèòćëćí\n"
-"è äîáđć äîńòúïćí ńúđâúđ."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd ć äćìîíà çà ïćśàò íćîáőîäèì íà lpr äà đàáîòè íîđìàëíî. Òîé ïđîńòî ć\n"
-"ńúđâúđ, êîéòî îïđćäćëÿ đàáîòèòć çà ïćśàò íà ïđèíòćđ(à/èòć)."
+msgid "Host \"%s\", port %s"
+msgstr "Őîńò \"%s\", ïîđò %s"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf ïîíÿêîăà óđćæäà èçâúđűâàíćòî íà đàçëèśíè çàäàśè\n"
-"ïđè ńòàđòèđàíć çà ïîääđúæêà íà ńèńòćìíàòà íàńòđîéêà."
+msgid "This partition can't be used for loopback"
+msgstr "Òîçè äÿë íć ìîæć äà áúäć èçïîëçâàí çà loopback"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Àâòîìàòèśíî çàńèśàíć è íàńòđîéêà íà őàđäóćđà ïđè ńòàđòèđàíć."
+msgid "File already exists. Use it?"
+msgstr "Ôàéëúò âćść ńúűćńòâóâà. Äà ăî èçïîëçâàì ëè ?"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Àâòîìàòèśíî đćăćíćđèđàíć íà header-èòć íà àäđîòî, â /boot çà\n"
-"/usr/include/linux/{autoconf,version}.h"
+msgid "received: "
+msgstr "ïîëóśćíî: "
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Òîçè ïàêćò çàđćæäà ìàđêèđàíàòà êëàâèàòóđíà íàđćäáà â /etc/sysconfig/"
-"keyboard.\n"
-"Òÿ ìîæć äà áúäć èçáđàíà ń èíńòđóìćíòà kbdconfig. Òđÿáâà äà îńòàâèòć "
-"òîâàâêëțśćíî çà ïîâćśćòî ìàűèíè."
+msgid "Right Alt key"
+msgstr "Äćńćí Alt êëàâèű"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Âêëțśè ôèëòđèđàíćòî íà ïàêćòè çà Linux ÿäđà ńćđèÿ 2.2, çà\n"
-"íàńòđîêà íà çàùèòíàòà ńòćíà, s cel çàùèòàâà íà ìàűèíàòà âè îò\n"
-"ìđćæîâè àòàêè."
+msgid "the list of alternative drivers for this sound card"
+msgstr "ńïèńúê íà àëòćđíàòèâíè äđàéâćđè çà òàçè êàđòà"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet superserver daemon (śćńòî íàđèśàí inetd) ïóńêà đàçëèśíè äđóăè\n"
-"Èíòćđíćò óńëóăè. Òîé îòăîâàđÿ çà ïóńêàíćòî íà ìíîăî óńëóăè îò đîäà íà\n"
-"telnet, ftp, rsh è rlogin. Èçêëțśâàíćòî íà inetd èçêëțśâà âńèśêè óńëóăè,\n"
-"çà êîèòî îòăîâàđÿ."
+msgid "Gateway"
+msgstr "Gateway"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scanner sharing"
+msgstr "Ïîäćëÿíć íà ôàéëîâć"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache ć World Wide Web (WWW) ńúđâúđ. Òîé ńëóæè äà îáđàáîòâà íà HTML "
-"ôàéëîâć\n"
-"è CGI."
+msgid "Tonga"
+msgstr "Òîíăà"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake ïđàâè ïđîáè íà őàđäóćđà, è ćâćíòóàëíî íàńòđîéâà\n"
-"íîâ/ïđîìćíćí őàđäóćđ."
+msgid "Tunisia"
+msgstr "Òóíèń"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM äîáàâÿ ïîääđúæêà íà ìèűêà â òćêńòîâî-áàçèđàíèòć Linux ïđèëîæćíèÿ êàòî\n"
-"Midnight Commander. Ńúùî òàêà ïîçâîëÿâà áàçèđàíèòć íà ìèűêà êîíçîëè\n"
-"đćæè-è-ëćïè îïćđàöèè, è âêëțśâà ïîääđúæêà íà èçêàśàùè ìćíțòà íà êîçîëàòà."
+msgid "Profile: "
+msgstr "Ïđîôèë: "
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
+"Click on a device in the left tree in order to display its information here."
msgstr ""
-"cron ć ńòàíäàđòíà UNIX ïđîăđàìà, êîÿòî ïćđèîäèśíî ïóńêà îïđćäćëćíè ïđîăđàìè\n"
-"ïî đàçïèńàíèć. vixie cron äîáàâÿ ìíîæćńòâî ïđćèìóùćńòâà íàä òćçè íà ïđîńòèÿ\n"
-"UNIX cron, âêëțśèòćëíî ïî-äîáđà ńèăóđíîńò è ìîùíè íàńòđîéâàùè îïöèè."
-#: ../../services.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
+msgid "XawTV isn't installed!"
msgstr ""
-"Ïóńêà êîìàíäè ïî đàçïèńàíèć âúâ âđćìć îïđćäćëćíî îò êîìàíäàòà at è ïóńêà\n"
-"íàáîđ îò äđóăè, êîăàòî íàòîâàđćíîńòòà ńïàäíć äîńòàòúśíî."
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"Create/Transfer\n"
+"backup keys for SSH"
msgstr ""
-"apmd ńć èçïîëçâà çà íàáëțäćíèć íà áàòćđèÿòà è çàïèńâàéêè ńòàòóńà śđćç\n"
-"syslog. Ìîæć ńúùî äà ńć èçïîëçâà çà ńïèđàíć íà ìàűèíàòà, êîăàòî áàòćđèÿòà ć "
-"èçòîùćíà."
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacrton - ïćđèîäèśíî èçïúëíÿâàíć íà êîìàíäè ïî đàçïèńàíèć."
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr "Íć âêëțśâà êđèòèśíè ôàéëîâć (passwd, group, fstab)"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Ïóńíè ALSA (Advanced Linux Sound Architecture) çâóêîâàòà ńèńòćìà"
+msgid "old static device name used in dev package"
+msgstr ""
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Installing packages..."
-msgstr "Èíńòàëèđàíć íà ïàêćòè ..."
+msgid "This label is already used"
+msgstr "Òîçè ćòèêćò âćść ńć èçïîëçâà"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-msgstr ""
+"Welcome to the Printer Setup Wizard\n"
"\n"
-"Èçïîëçâàíć: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-
-#: ../../standalone.pm:1
-#, c-format
-msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
-#: ../../standalone.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
+msgid "After formatting partition %s, all data on this partition will be lost"
+msgstr "Ńëćä ôîđìàòèđàíć íà äÿëà %s, âńèśêè äàííè âúđőó íćăî ùć áúäàò çàăóáćíè"
-#: ../../standalone.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
-msgstr ""
+msgid "Connection Time: "
+msgstr "Âđćìć íà âđúçêàòà: "
-#: ../../standalone.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "select perm file to see/edit"
+msgstr ""
-#: ../../standalone.pm:1
+#: ../../standalone/livedrake:1
#, c-format
msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
+"Ìîëÿ, ńëîæćòć Èíńòàëàöèîííèÿ CD-ROM â óńòđîéńòâîòî è íàòèńíćòć Ok, êîăàòî "
+"ńòć ăîòîâè.\n"
+"Àêî ăî íÿìàòć, íàòèńíćòć Îòìÿíà, çà äà èçáćăíćòć èíńòàëèđàíćòî îò òîçè CD-"
+"ROM."
-#: ../../standalone.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr ""
+msgid "Use group id for execution"
+msgstr "Èçïîëçâà id íà ăđóïà ïđè èçïúëíćíèć"
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "[keyboard]"
-msgstr "[êëàâèàòóđà]"
+msgid "Choose the default user:"
+msgstr "Èçáćđćòć ïîäđàçáèđàù ńć ïîòđćáèòćë :"
-#: ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
-msgstr ""
+msgid "Gabon"
+msgstr "Ăàáîí"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
+"\n"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
msgstr ""
+"\n"
+"Îòäàëćśćíèòć íà CUPS ńúđâúđ ïđèíòćđè íć òđÿáâà äà íàńòđîéâàòć\n"
+"òóê; òćçè ïđèíòćđè ùć áúäàò çàńćśćíè àâòîìàòèśíî."
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
msgstr ""
+"Mandrake Linux ìîæć äà ïîäúđæà ìíîăî ćçèöè. Èçáćđćòć\n"
+"ćçèöèòć êîèòî èńêàòć àä èíńòàëèđàòć. Òć ùć áúäàò íàëèśíè ńëćä\n"
+"êàòî çàâúđűè èíńòàëàöèÿòà è âèć ïđćńòàđòèđàòć ńèńòćìàòà."
-#: ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default : save default directories.\n"
-"--debug : show all debug messages.\n"
-"--show-conf : list of files or directories to backup.\n"
-"--config-info : explain configuration file options (for non-X "
-"users).\n"
-"--daemon : use daemon configuration. \n"
-"--help : show this message.\n"
-"--version : show version number.\n"
-msgstr ""
+msgid "Domain"
+msgstr "Äîìćéí"
-#: ../../standalone.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "Òîśćí đàçìćđ íà RAM-ïàìćòòà, àêî ć íćîáőîäèìî (íàìćđćíè %d MB)"
+
+#: ../../help.pm:1
#, c-format
msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
msgstr ""
-#: ../../steps.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Exit install"
-msgstr "Èçőîä îò èíńòàëàöèîííàòà ïđîăđàìà"
-
-#: ../../steps.pm:1
-#, fuzzy, c-format
-msgid "Install updates"
-msgstr "Èíńòàëèđàíć íà ńèńòćìàòà"
+msgid "Provider dns 2 (optional)"
+msgstr "2-đè DNS íà äîńòàâśèêà (ïî æćëàíèć)"
-#: ../../steps.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Configure services"
-msgstr "Íàńòđîéêà íà óńëóăèòć"
+msgid "Boot device"
+msgstr "Ńòàđòèđàùî óńòđîéńòâî"
-#: ../../steps.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Configure X"
-msgstr "Íàńòđîéêà íà Ő"
+msgid "Which partition do you want to resize?"
+msgstr "Êîé äÿë æćëàćòć äà ïđîìćíèòć?"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Install bootloader"
-msgstr "Èíńòàëèđàíć íà bootloader"
+msgid "United States Minor Outlying Islands"
+msgstr "Ìàëêè Îńòđîâè ïî êđàéáđćæèćòî íà ŃÀÙ"
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Configure networking"
-msgstr "Íàńòîéêà íà ìđćæàòà"
+msgid "A tool to monitor your logs"
+msgstr "Èíńòđóìćíò çà ïđćăëćæäàíć íà âàűèòć ëîă ôàéëîâć"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add a user"
-msgstr "Äîáàâÿíć íà ïîòđćáèòćë"
+msgid "Djibouti"
+msgstr "Äæèáóòè"
-#: ../../steps.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Root password"
-msgstr "Âúâćäćòć ïàđîëà çà root"
+msgid "detected on port %s"
+msgstr "çàńćśćí íà ïîđò %s"
-#: ../../steps.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Install system"
-msgstr "Èíńòàëèđàíć íà ńèńòćìàòà"
+msgid "LPD"
+msgstr "LPD"
-#: ../../steps.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Choose packages to install"
-msgstr "Ïàêćòè çà èíńòàëèđàíć"
+msgid "Graphics card: %s\n"
+msgstr "Ăđàôèśíà êàđòà: %s\n"
-#: ../../steps.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Format partitions"
-msgstr "Ôîđìàòèđàíć íà äÿëîâć"
+msgid "Yaboot"
+msgstr "Yaboot"
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Partitioning"
-msgstr "Đàçäćëÿíć íà äÿëîâć"
+msgid "Please check if you are using a DVDRAM device"
+msgstr "Ìîëÿ, ïđîâćđćòć äàëè èçïîëçâàòć DVDRAM óńòđîéńòâî"
-#: ../../steps.pm:1
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Splash selection"
+msgstr "Çàïàçè èçáîđ íà ïàêćòè"
+
+#: ../../partition_table.pm:1
#, c-format
-msgid "Choose your keyboard"
-msgstr "Èçáîđ íà êëàâèàòóđà"
+msgid "Extended partition not supported on this platform"
+msgstr "Đàçűèđćíè äÿëîâć íć ńć ïîääúđæàò íà òàçè ïëàòôîđìà"
-#: ../../steps.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Select installation class"
-msgstr "Èçáîđ íà êëàń èíńòàëàöèÿ"
+msgid "ISDN Configuration"
+msgstr "Íàńòđîéêà íà IDSN"
-#: ../../steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hard drive detection"
-msgstr "Çàńèśàíć íà äèńêîâćòć"
+msgid "high"
+msgstr "âèńîêî"
-#: ../../steps.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Configure mouse"
-msgstr "Íàńòđîéêà íà ìèűêà"
+msgid "Internet Connection Sharing"
+msgstr "Ńïîäćëÿíć íà âđúçêàòà ń Èíòćđíćò"
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "License"
-msgstr "Ëèöćíç"
+msgid "Choose file"
+msgstr "Èçáćđćòć ôàéë"
-#: ../../steps.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Language"
-msgstr "Èçáîđ íà ćçèê"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
+msgstr ""
+"Âíèìàíèć ! Îòêđèòà ć íàńòđîéêà íà Çàùèòíà Ńòćíà. Ìîæć äà ńć íàëîæè íÿêàêâà "
+"đúśíà ïîïđàâêà ńëćä èíńòàëàöèÿòà."
-#: ../../ugtk2.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "Ïćśàòàíć íà ïđèíòćđ \"%s\""
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "utopia 25"
-msgstr "utopia 25"
+msgid ""
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
+msgstr ""
+"Èńêàòć ëè äà đàçđćűèòć ïćśàò íà ïđèíòćđèòć ńïîìćíàòè ăîđć èëè íà ïđèíòćđèòć "
+"â ëîêàëíàòà ìđćæà?\n"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer default settings"
+msgstr "Èçáîđ ìîäćë íà ïđèíòćđà"
+
+#: ../../mouse.pm:1
#, c-format
-msgid "OK"
-msgstr "OK"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Îáèêíîâćííà PS2 ìèűêà"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "logdrake"
-msgstr "ëîăäđćéê"
+msgid "Removing old printer \"%s\"..."
+msgstr "Èçòđèâàíć íà ńòàđ ïđèíòćđ \"%s\"..."
-#: ../../ugtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgid "Select a device !"
+msgstr "Èçáćđćòć óńòđîéńòâî !"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove selected server"
+msgstr "Èçòđèâàíć íà îïàűêàòà"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (èíńòàëàöèÿ ăđàôèśćí äđàéâćđ)"
+msgid "French Southern Territories"
+msgstr "Ôđàíöèÿ Țæíè Òćđèòîđèè"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Êàđòàòà âè ìîæć äà èìà ïîääđúæêà íà őàđäóćđíî 3D óńêîđćíèć ń XFree %s.\n"
-"ÎÒÁĆËĆÆĆÒĆ, ŚĆ ÒÎÂÀ Ć ĆÊŃÏĆĐÈÌĆÍÒÀËÍÀ ÏÎÄÄĐÚÆÊÀ È ÊÎÌÏȚÒÚĐÚÒ ÂÈ ÌÎÆĆ ÄÀ "
-"ÇÀÁÈĆ."
+msgid "the vendor name of the processor"
+msgstr "èìćòî íà ïđîèçâîäèòćëÿ íà ïđîöćńîđà"
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s ń ĆÊŃÏĆĐÈÌĆÍÒÀËÍO őàđäóćđíî 3D óńêîđćíèć"
+msgid "All data on this partition should be backed-up"
+msgstr "Âńèśêè äàííè íà òîçè äÿë òđÿáâà äà áúäàò àđőèâèđàíè"
-#: ../../Xconfig/card.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Êàđòàòà âè ìîæć äà èìà ïîääđúæêà íà őàđäóćđíî 3D óńêîđćíèć â XFree %s."
+msgid "Installing package %s"
+msgstr "Èíńòàëèđàíć íà ïàêćòà %s"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s ń őàđäóćđíî 3D óńêîđćíèć"
+msgid "Checking device and configuring HPOJ..."
+msgstr "Ïđîâćđêà íà óńòđîéńòâî è êîíôèăóđàöèÿ çà HPOJ..."
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
msgstr ""
-"Êàđòàòà âè ìîæć äà èìà ïîääđúæêà íà őàđäóćđíî 3D óńêîđćíèć, íî ńàìî ń XFree %"
-"s,\n"
-"ÎÒÁĆËĆÆĆÒĆ, ŚĆ ÒÎÂÀ Ć ĆÊŃÏĆĐÈÌĆÍÒÀËÍÀ ÏÎÄÄĐÚÆÊÀ È ÌÎÆĆ ÄÀ ÇÀÁÈĆ ÊÎÌÏȚÒÚĐÀ "
-"ÂÈ.\n"
-"Êàđòàòà âè ńć ïîääúđæà îò XFree %s, êîéòî ìîæć äà èìà ïî-äîáđà ïîääđúæêà íà "
-"2D."
+"Àêî èńêàòć îùć äÿëîâć, ìîëÿ èçòđèéòć ćäèí, çà äà ìîæćòć äà ńúçäàäćòć ćäèí "
+"đàçűèđćí äÿë"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
msgstr ""
-"Êàđòàòà âè ìîæć äà èìà ïîääđúæêà íà őàđäóćđíî 3D óńêîđćíèć, íî ńàìî ń Xfree %"
-"s.\n"
-"Êàđòàòà âè ńć ïîääúđæà îò XFree %s, êîéòî ìîæć äà èìà ïî-äîáđà ïîääđúæêà íà "
-"2D."
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
+msgid "Choose packages to install"
+msgstr "Ïàêćòè çà èíńòàëèđàíć"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Íàńòđîéêà ńàìî íà êàđòà \"%s\"(%s)"
+msgid ""
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Use Xinerama extension"
-msgstr "Èçïîëçâàé đàçűèđćíèćòî Xinerama"
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr "ÂŃÈŚÊÈ ńúùćńòâóâàùè äÿëîâć è äàííèòe âúđőó òÿő íà %s ùć áúäàò çàăóáćíè"
-#: ../../Xconfig/card.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Configure all heads independently"
+msgid ""
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
msgstr ""
+"Ńèńòćìàòà âè íÿìà äîńòàòúśíî ìÿńòî çà èíńòàëàöèÿ èëè îáíîâÿâàíć (%d > %d)"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Êîÿ íàńòđîéêà íà XFree èńêàòć äà èìàòć ?"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
+msgstr ""
+"Âńćêè ïđèíòćđ ńć íóæäàć îò èìć (íàïđèìćđ \"printer\"). Ïîëćòàòà Îïèńàíèć è "
+"Ìćńòîïîëîæć íć òđÿáâà äà áúäàò ïîïúëâàíè. Èìà êîìćíòàđè çà ïîòđćáèòćëèòć."
-#: ../../Xconfig/card.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "XFree configuration"
-msgstr "Íàńòđîéêà íà XFree"
+msgid ""
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Èçáćđćòć êàïàöèòćò íà ïàìćòòà íà ăđàôèśíàòà ńè êàđòà"
+msgid "Bhutan"
+msgstr "Áóòàí"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
+msgid "Network interface"
+msgstr "Ìđćæîâ èíòćđôćéń"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Multi-head configuration"
-msgstr ""
+msgid "Reading printer data..."
+msgstr "Śćòćíć íà äàííè îò ïđèíòćđà ..."
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Choose an X server"
-msgstr "Èçáćđćòć X ńúđâúđ"
+msgid "Korean keyboard"
+msgstr "Êîđćéńêà êëàâèàòóđà"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "X server"
-msgstr "X ńúđâúđ"
+msgid "Not connected"
+msgstr "Íć ńâúđçàí"
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "64 MB or more"
-msgstr "64 ÌÁ èëè ïîâćść"
+msgid "Greek"
+msgstr "Ăđúöêà"
-#: ../../Xconfig/card.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "32 MB"
-msgstr "32 ÌÁ"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "16 MB"
-msgstr "16 ÌÁ"
+msgid "Saint Kitts and Nevis"
+msgstr "Ńâćòè Êèòń è Íćâèń"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "8 MB"
-msgstr "8 ÌÁ"
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "4 MB"
-msgstr "4 ÌÁ"
+msgid "Enable OF Boot?"
+msgstr "Ńòàđòèđàíć îò OF ?"
-#: ../../Xconfig/card.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "2 MB"
-msgstr "2 ÌÁ"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "Íć ìîæćòć äà èçïîëçâàòć JFS çà äÿë ïî-ìàëúê îò 16 ÌÁ"
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "1 MB"
-msgstr "1 ÌÁ"
+msgid "Monitor VertRefresh: %s\n"
+msgstr "Âćđòèêàëíî îïđćńíÿâàíć íà ìîíèòîđà: %s\n"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "512 kB"
-msgstr "512 ÊÁ"
+msgid "path"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "256 kB"
-msgstr "256 ÊÁ"
+msgid "Mount point"
+msgstr "Ìÿńòî íà ìîíòèđàíć"
-#: ../../Xconfig/main.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
msgstr ""
-"Äà çàïàçÿ ëè ïđîìćíèòć ?\n"
-"Òćêóùàòà íàńòđîéêà ć:\n"
-"\n"
-"%s"
-
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Options"
-msgstr "Îïöèè"
+"Ïîÿâè ńć ăđćűêà:\n"
+"%s\n"
+"Îïèòàéòć äà ïđîìćíèòć íÿêîé ïàđàìćòđè"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Test"
-msgstr "Òćńò"
+msgid "Restore system"
+msgstr "Ńèńòćìà çà âúçńòàíîâÿâàíć"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Resolution"
-msgstr "Đàçäćëèòćëíà ńïîńîáíîńò"
+msgid ""
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
+msgstr ""
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Monitor"
-msgstr "Ìîíèòîđ"
+msgid "The DHCP end ip"
+msgstr ""
-#: ../../Xconfig/main.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Graphic Card"
-msgstr "Ăđàôèśíà êàđòà"
+msgid "Another one"
+msgstr "Äđóăî"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Vertical refresh rate"
-msgstr "Âćđòèêàëíà ńêîđîńò íà âúçńòàíîâÿâàíć"
+msgid "Drakbackup"
+msgstr ""
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Őîđèçîíòàëíà ńêîđîńò íà âúçńòàíîâÿâàíć"
+msgid "Colombia"
+msgstr "Êîëóìáèÿ"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
+"Current configuration of `%s':\n"
"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
msgstr ""
-"Äâàòà êđèòèśíè ïàđàìćòúđà ńà âćđòèêàëíàòà ńêîđîńò íà âúçńòàíîâÿâàíć, êîÿòî "
-"îòđàçÿâà ńêîđîńòòà, \n"
-"ń êîÿòî öćëèÿò ćêđàí ńć âúçńòàíîâÿâà, è íàé-âàæíîòî - őîđèçîíòàëíàòà\n"
-"ńèíőđîíèçàöèîííà ńêîđîńò, êîÿòî îòđàçÿâà ńêîđîńòòà, ń êîÿòî ńć èçïèńâàò "
-"őîđèçîíòàëíèòć ëèíèè.\n"
-"\n"
-"ÌÍÎĂÎ Ć ÂÀÆÍÎ äà èçáćđćòć òàêàâà ńèíőđîíèçàöèîííàòà ńêîđîńò, êîÿòî äà "
-"îòăîâàđÿ íà âúçìîæíîńòèòć íà Âàűèÿ ìîíèòîđ - â ïđîòèâćí ńëóśàé ìîæćòć äà "
-"ïîâđćäèòć ìîíèòîđà ńè.\n"
-" Àêî èìàòć íÿêàêâè ńúìíćíèÿ, èçáćđćòć êîíńćđâàòèâíà íàńòđîéêà."
-
-#: ../../Xconfig/monitor.pm:1
-#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr "Ïđîáà çà Plug & Play ć íćóńïćűíà. Ìîëÿ, èçáćđćòć ïđàâèëćí ìîíèòîđ"
-
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Vendor"
-msgstr "Ïđîèçâîäèòćë"
#: ../../Xconfig/monitor.pm:1
#, c-format
msgid "Plug'n Play"
msgstr "Plug & Play"
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose a monitor"
-msgstr "Èçáćđćòć ìîíèòîđ"
+msgid "Reunion"
+msgstr "Đèțíèúí"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Graphics card: %s"
-msgstr "Ăđàôèśíà êàđòà: %s"
+msgid "Details"
+msgstr "Ïîäđîáíîńòè"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Èçáćđćòć đàçäćëèòćëíà ńïîńîáíîńò è äúëáîśèíà íà öâćòîâćòć"
+msgid "For security reasons, it will be disconnected now."
+msgstr "Çà âàűà ńèăóđíîńò, ńćăà òÿ ùć áúäćòć îòâúđçàíà."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Resolutions"
-msgstr "Đàçäćëèòćëíà ńïîńîáíîńò"
+msgid "Synchronization tool"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 ìèëèàđäà öâÿòà (32 áèòà)"
+msgid "Checking your system..."
+msgstr "Ïđîâćđêà íà âàűàòà ńèńòćìà..."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 ìèëèîíà öâÿòà (24 áèòà)"
+msgid "Print"
+msgstr "Ïćśàò"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 őèëÿäè öâÿòà (16 áèòà)"
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 őèëÿäè öâÿòà (15 áèòà)"
+msgid "Mongolia"
+msgstr "Ìîíăîëèÿ"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 öâÿòà (8 áèòà)"
+msgid "Mounted\n"
+msgstr "Ìîíòèđàí\n"
-#: ../../Xconfig/test.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Is this the correct setting?"
-msgstr "Âńèśêî ïđàâèëíî ëè ć ?"
+msgid "Graphical Interface"
+msgstr "Ăđàôèśćí èíòćđôćéń"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Ïîçâîëćíî â %d ńćêóíäè"
+msgid "Restore Users"
+msgstr "Âúçńòàíîâè Ïîòđćáèòćëè"
-#: ../../Xconfig/test.pm:1
-#, c-format
-msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
-msgstr ""
-"Ïîÿâè ńć ăđćűêà:\n"
-"%s\n"
-"Îïèòàéòć äà ïđîìćíèòć íÿêîé ïàđàìćòđè"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Encryption key for %s"
+msgstr "Êëțś çà êđèïòèđàíć"
-#: ../../Xconfig/test.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
+msgid ""
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
-"Âíèìàíèć: òćńòâàíćòî íà òàçè ăđàôèśíà êàđòà ìîæć äà çàìđàçè êîìïțòúđà âè"
+"portmapper ńć ńïđàâÿ ń RPC âđúçêè, êîèòî ńć èçïîëçâàò îò ïđîòîêîëè êàòî\n"
+"NFS è NIS. portmap ńúđâúđà òđÿáâà äà ć ïóńíàò íà ìàűèíè, êîèòî đàáîòÿò êàòî\n"
+"ńúđâúđ çà ïđîòîêîëè, êîèòî ńć íóæäàÿò äà èçïîëçâàò RPC ìćőàíèçúì."
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Èńêàòć ëè äà òćńòâàòć íàńòđîéêèòć?"
+msgid "Detected hardware"
+msgstr "Îòêđèò őàđäóćđ"
-#: ../../Xconfig/test.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Test of the configuration"
-msgstr "Ïđîâćđêà íà íàńòđîéêàòà"
+msgid "Mauritius"
+msgstr "Ìàâđèöèé"
-#: ../../Xconfig/various.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "What norm is your TV using?"
-msgstr "Êàêúâ ć òèïúò íà èçïîëçâàíèÿò TV ?"
+msgid "Myanmar (Burmese)"
+msgstr "Ìàéíìàđ (áèđìàíńêà)"
-#: ../../Xconfig/various.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
-msgstr ""
+msgid "Enabling swap partition %s"
+msgstr "Đàçđćűàâà swap äÿë %s"
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
msgstr ""
-"Kîìïțòúđà âè ìîæć àâòîìàòèśíî, äà âëćçć â X ïđè ńòàđòèđàíć.\n"
-"Èńêàòć ëè X äà ńć ńòàđòèđà, êîăàòî đćńòàđòèđàòć ńèńòćìàòà?"
+"Íÿìà FAT äÿëîâć çà èçïîëçâàíć êàòî loopback (èëè íÿìà äîńòàòúśíî ìÿńòî íà "
+"äèńêà)"
-#: ../../Xconfig/various.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Graphical interface at startup"
-msgstr "X ïđè ńòàđòèđàíć íà ńèńòćìàòà"
+msgid "Armenian (old)"
+msgstr "Àđìćíńêà (ńòàđà)"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 äđàéâćđ: %s\n"
+msgid ""
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
+msgstr ""
+"Ïđèíòćđ ń èìć \"%s\" âćść ńúùćńòâóâà â %s.\n"
+"Öúêíćòć \"Ïđćőâúđëè\", çà äà ăî ïđćçàïèűćòć.\n"
+"Ìîæćòć ńúùî òàêà äà íàïèűćòć íîâî èìć èëè äà ïđîïóńíòć ïđèíòćđà."
-#: ../../Xconfig/various.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 ńúđâúđ: %s\n"
+msgid ""
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
+msgstr "íàìćđćòć đćűćíèÿ íà âàűèòć ïđîáëćìè ń ïîäđúæêàòà íà MandrakeSoft"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Resolution: %s\n"
-msgstr "Đàçäćëèòćëíà ńïîńîáíîńò: %s\n"
+msgid ", host \"%s\", port %s"
+msgstr ", őîńò \"%s\", ïîđò %s"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Color depth: %s\n"
-msgstr "Äúëáîśèíà íà öâćòà: %s\n"
+msgid "Monaco"
+msgstr "Ìîíàêî"
-#: ../../Xconfig/various.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Ăđàôèśíà ïàìćò: %s kB\n"
+msgid "%s formatting of %s failed"
+msgstr "%s ôîđìàòèđàíć îò %s ïđîâàëćíî"
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Ăđàôèśíà êàđòà: %s\n"
+msgid "Partitioning failed: %s"
+msgstr "Íćóńïćűíî đàçäćëÿíć íà: %s"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Âćđòèêàëíî îïđćńíÿâàíć íà ìîíèòîđà: %s\n"
+msgid "Canada (cable)"
+msgstr "Êàíàäà (êàáćë)"
-#: ../../Xconfig/various.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Őîđèçîíòàëíà ńèíőđîíèçàöèÿ íà ìîíèòîđà: %s\n"
+msgid "Upgrade"
+msgstr "Îáíîâÿâàíć"
-#: ../../Xconfig/various.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Monitor: %s\n"
-msgstr "Ìîíèòîđ: %s\n"
+msgid "Workstation"
+msgstr "Đàáîòíà ńòàíöèÿ"
-#: ../../Xconfig/various.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Óńòđîéńòâî íà ìèűêàòà: %s\n"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"Èíńòàëèđàì ïàêćò %s\n"
+"%d%%"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Òèï ìèűêà: %s\n"
+msgid "Kyrgyzstan"
+msgstr "Êèđăèçòàí"
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Òèï êëàâèàòóđà: %s\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "With basic documentation"
+msgstr "Ń áàçîâà äîêóìćíòàöèÿ (ïđćïîđúśâà ńć!)"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Options: %s"
-msgstr "Îïöèè: %s"
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anacrton - ïćđèîäèśíî èçïúëíÿâàíć íà êîìàíäè ïî đàçïèńàíèć."
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Mount point: "
-msgstr "Ìÿńòî íà ìîíòèđàíć: "
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"Òđÿáâà äà èìàòć root-äÿë.\n"
+"Çàòîâà ńúçäàéòć äÿë (èëè öúêíćòć íà ńúùćńòâóâàù).\n"
+"Òîăàâà èçáćđćòć äćéńòâèć ``Ìÿńòî íà ìîíòèđàíć'' è ăî ńëîæćòć `/'"
-#: ../../diskdrake/dav.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Server: "
-msgstr "Ńúđâúđ: "
+msgid "Proxy should be http://..."
+msgstr "Proxy-ńúđâúđà òđÿáâà äà ć http://..."
-#: ../../diskdrake/dav.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "URL òđÿáâà äà çàïîśâà ń http:// èëè https://"
+msgid "South Africa"
+msgstr "Țæíà Àôđèêà"
-#: ../../diskdrake/dav.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Ìîëÿ âúâćäćòć WebDAV ńúđâúđ URL"
+msgid "Western Sahara"
+msgstr "Çàïàäíà Ńàőàđà"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Mount point"
-msgstr "Ìÿńòî íà ìîíòèđàíć"
+msgid "Etherboot Floppy/ISO"
+msgstr ""
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Server"
-msgstr "Ńúđâúđ"
+msgid "Modify printer configuration"
+msgstr "Ïîïđàâè íàńòđîéêèòć íà ïđèíòćđ"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mount"
-msgstr "Ìîíòèđàé"
+msgid "Choose a partition"
+msgstr "Èçáćđćòć äÿë"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Unmount"
-msgstr "Äćìîíòèđàé"
+msgid "Edit current rule"
+msgstr "Đćäàêòèđà òćêóùîòî ïđàâèëî"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "New"
-msgstr "Íîâ"
+msgid "%s"
+msgstr ""
-#: ../../diskdrake/dav.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Âìćńòî òîâà èçïîëçâàéòć ``%s''"
+msgid "Please test the mouse"
+msgstr "Ìîëÿ, ïđîáâàéòć ìèűêàòà ńè"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Type"
-msgstr "Âèä"
+msgid "Other Media"
+msgstr "Äđóă íîńèòćë"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Ïúđâî èçïîëçâàéòć 'Äćìîíòèđàíć'"
+msgid "Backup system files"
+msgstr "Đćçćđâíî êîïèć íà ńèńòćìíè ôàéëîâć"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Delete"
-msgstr "Èçòđèé"
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Create"
-msgstr "Ńúçäàé"
+msgid "Sector"
+msgstr "Ńćêòîđ"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Filesystem types:"
-msgstr "Âèäîâć ôàéëîâà ńèńòćìà:"
+msgid "Qatar"
+msgstr "Êàòàđ"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Empty"
-msgstr "Ïđàçćí"
+msgid "LDAP Base dn"
+msgstr "LDAP Áàçîâ dn"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Windows"
-msgstr "Windows"
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr ""
+"Íć ìîæćòć äà îńòàâèòć ïàêćòà íćìàđêèđàí, çàùîòî íÿìàòć ìÿńòî äà ăî "
+"èíńòàëèđàòć"
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "HFS"
-msgstr "HFS"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "generate auto-install floppy"
+msgstr "Ïîäăîòâè äèńêćòà çà àâòîìàòèśíà èíńòàëàöèÿ"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "Dialing mode"
+msgstr "Đćæèì íà íàáèđàíć"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Swap"
-msgstr "Swap"
+msgid "File sharing"
+msgstr "Ïîäćëÿíć íà ôàéëîâć"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Journalised FS"
-msgstr "Æóđíàëíà FS"
+msgid "Clean /tmp at each boot"
+msgstr "Ïîśèńòâàíć íà /tmp ïđè âńÿêî çàđćæäàíć"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ext2"
-msgstr "Ext2"
+msgid "Malawi"
+msgstr "Ìàëàâè"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No hard drives found"
-msgstr "Íć ć íàìćđćí òâúđä äèńê"
+msgid "Please choose your type of mouse."
+msgstr "Ìîëÿ, èçáćđćòć òèï íà ìèűêàòà."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Please click on a partition"
-msgstr "Ìîëÿ, öúêíćòć íà äÿëà"
+msgid "class of hardware device"
+msgstr "êëàń őàđäóćđíî óńòđîéńòâî"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
msgstr ""
-"Èìàòć ćäèí ăîëÿì FAT äÿë\n"
-"(ïî ïđèíöèï ńć ïîëçâàò îò Microsoft Dos/Windows).\n"
-"Ïđćäëàăàì ïúđâî äà ïđîìćíèòć ăîëćìèíàòà íà òîçè äÿë\n"
-"(ùđàêíćòć âúđőó íćăî, à ńëćä òîâà ùđàêíćòć âúđőó \"Ïđîìćíè ăîëćìèíàòà\")"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Choose action"
-msgstr "Èçáćđćòć äćéńòâèć"
+"Òîâà ńà ìàűèíèòć è ìđćæèòć çà êîèòî ëîêàëíî ńâúđçàíèòć ïđèíòćđè ùć áúäàò "
+"äîńòúïíè:"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Wizard"
-msgstr "Ìàăüîńíèê"
+msgid "United Kingdom"
+msgstr "Àíăëèÿ"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Àêî ńìÿòàòć äà èçïîëçâàòć aboot, îńòàâćòć ńâîáîäíî ïđîńòđàíńòâî (2048 "
-"ńćêòîđà\n"
-"ńà äîńòàòúśíè) â íàśàëîòî íà äèńêà"
+msgid "running"
+msgstr "ńòàđòèđàíć"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Ïúđâî ńúçäàéòć backup íà ńâîèòć äàííè"
+msgid "default"
+msgstr "ïî ïîäđàáèđàíć"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Read carefully!"
-msgstr "Ïđîśćòćòć âíèìàòćëíî !"
+msgid "Indonesia"
+msgstr "Èíäîíćçèÿ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Encryption key (again)"
-msgstr "Êëțś çà êđèïòèđàíć (îòíîâî)"
+msgid "France [SECAM]"
+msgstr "Ôđàíöèÿ [SECAM]"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Encryption key"
-msgstr "Êëțś çà êđèïòèđàíć"
+msgid "restrict"
+msgstr "îăđàíèśè"
-#: ../../diskdrake/interactive.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "The encryption keys do not match"
-msgstr "Êëțśîâćòć çà êđèïòèđàíć íć ńúâïàäàò"
+msgid "must have"
+msgstr "íóæćí"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
+msgid ""
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
msgstr ""
-"Êđèïòèđàù êëțś ć ïđćêàëćíî ïđîńò (òđÿáâà äà áúäć äúëăà ïîíć %d ńèìâîëà)"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "Èçáîđ íà êđèïòèđàù êëțś çà ćàűàòà ôàéëîâà ńèńòćìà"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Filesystem encryption key"
-msgstr "Êđèïòèđàù êëțś çà ôàéëîâà ńèńòćìà"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Type: "
-msgstr "Âèä: "
+"CUPS íć ïîääúđæà ïđèíòćđè íà Novell ńúđâúđè èëè ïđèíòćđè èçïđàùàùè äàííè âúâ "
+"ńâîáîäíî-èçăđàäćíà êîìàíäà.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "on channel %d id %d\n"
-msgstr "íà êàíàë %d id %d\n"
+msgid "Senegal"
+msgstr "Ńćíćăàë"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Òèï íà òàáëèöàòà ń äÿëîâć: %s\n"
+msgid "Command line"
+msgstr "Êîìàíäćí đćä"
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-äèńêîâć %s\n"
+msgid ""
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
+msgstr ""
+"Íàűèòć ïúëíè đćűćíèÿ, êàêòî è ńïćöèàëíè ïđćäëîæćíèÿ íà ïđîäóêòè è äđóăè "
+"\"ëàêîìńòâà\" ńà äîńòúïíè â íàűèÿò 'e-èçòîśíèê':"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Info: "
-msgstr "Èíôîđìàöèÿ: "
+msgid "access to administrative files"
+msgstr "äîńòúï äî ôàéëîâć çà àäìèíèńòđèđàíć"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Ăćîìćòđèÿ: %s öèëèíäđè, %s ăëàâè, %s ńćêòîđè\n"
+msgid ""
+"Error during sendmail.\n"
+" Your report mail was not sent.\n"
+" Please configure sendmail"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Size: %s\n"
-msgstr "Đàçìćđ: %s\n"
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ", ìíîăîôóíêöèîíàëíî óńòđîéńòâî íà íà ïàđàëćëćí ïîđò \\#%s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Read-only"
-msgstr "Ńàìî çà śćòćíć"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Device: "
-msgstr "Óńòđîéńòâî: "
+msgid "Montserrat"
+msgstr "Ìîíńćđàò"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
+msgid "Automatic dependencies"
msgstr ""
-"\n"
-"Òàçè ńïćöèàëíà ńòàđòèđàùà\n"
-"èâèöà íà äÿëà ć çà äâîéíî\n"
-"ńòàđòèđàíć íà ńèńòćìàòà âè.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Âćđîÿòíî ć òîçè äÿë äà ć\n"
-"Äđàéâćđ-äÿë, ìîæć áè òđÿáâà\n"
-"òđÿáâà äà ăî îńòàâèòć.\n"
+msgid "Swap"
+msgstr "Swap"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Loopback file name: %s"
-msgstr "Èìć íà loopback ôàéëà: %s"
+msgid "Connecting to the Internet "
+msgstr "Ńâúđçâàì ńć êúì Èíòćđíćò"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-äèńêîâć %s\n"
+msgid "Restore Other"
+msgstr "Âúçńòàíîâè äđóăè"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Chunk size %s\n"
-msgstr "Đàçìćđ íà ïàđśćòî %s\n"
+msgid "TV card"
+msgstr "TV êàđòà"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Level %s\n"
-msgstr "Íèâî %s\n"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "Ïđèíòćđ íà SMB/Windows 95/98/NT ńúđâúđ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
+msgid ", "
msgstr ""
-"Äÿë, êîéòî ńć ńòàđòèđà ïî ïîäđàçáèđàíć\n"
-" (çà MS-DOS boot, íć çà lilo)\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Loopback file(s):\n"
-" %s\n"
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
msgstr ""
-"Loopback ôàéë(îâć):\n"
-" %s\n"
+"Àđăóìćíòè: (umask)\n"
+"\n"
+"Óńòàíîâÿâà çà root umask."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+msgid "Remove selected host/network"
+msgstr "Èçòđèâàíć íà èçáđàí őîńò/ìđćæà"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Mounted\n"
-msgstr "Ìîíòèđàí\n"
+msgid ""
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
+msgstr ""
+"Postfix ć Main Transport Agent (MTA), êîéòî ć ïđîăđàìà êîÿòî ïđćíàńÿ\n"
+"ïîùà îò ìàűèíà íà ìàűèíà."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Not formatted\n"
-msgstr "Íćôîđìàòèđàí\n"
+msgid "Disconnection from the Internet failed."
+msgstr "Đàçêàśâàíćòî îò Èíòćđíćò ć íćóńïćűíî"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Formatted\n"
-msgstr "Ôîđìàòèđàí\n"
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
+msgstr ""
+"Òóê ìîæć äà èçáćđćòć êëàâèű èëè êëàâèűíà êîìáèíàöèÿ, êîÿòî \n"
+"ùć âè ïîçâîëè äà èçáèđàòć đàçëèśíè êëàâèàòóđíè ïîäđćäáè\n"
+"(íàïđ. latin è íć latin)"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Îò öèëèíäúđ %d äî öèëèíäúđ %d\n"
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Network Hotplugging"
+msgstr "Íàńòđîéêà íà ìđćæàòà"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ", %s sectors"
-msgstr ", %s ńćêòîđà"
+msgid "if set to yes, reports check result to tty."
+msgstr "àêî ć çàäàćíî äà, èçïđàùà đćçóëòàòà îò ïđîâćđêàòà íà tty."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Size: %s"
-msgstr "Đàçìćđ: %s"
+msgid "Restore From CD"
+msgstr "Âúçńòàíîâÿâà îò CD"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Start: sector %s\n"
-msgstr "Íàśàëî: ńćêòîđ %s\n"
+msgid ""
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
+msgstr ""
+"Íà ïúò ńòć äà íàńòđîèòć êîìïțòúđà ńè òàêà, ść äà ïîäćëÿ Èíòćđíćò âđúçêàòà\n"
+"ńè. Ń òàçè âúçìîæíîńò, äđóăè êîìïțòđè â ëîêàëíàòà âè ìđćæà ùć ìîăàò äà\n"
+"èçïîëçâàò Èíòćđíćò âđúçêàòà íà òîçè êîìïțòúđ.\n"
+"\n"
+"Óáćäćòć ńć, ść âèć ńòć êîíôèăóđèđàëè âàűàòà Ìđćæà/Èíòćđíćò äîńòúï "
+"èçïîëçâàéêè drakconnect ïđćäè äà ïđàâèòć äđóăî.\n"
+"\n"
+"Îòáćëćæćòć: òđÿáâà âè îòäćëćí çà òîâà ìđćæîâ àäàïòćđ, çà äà óńòàíîâèòć "
+"âúòđćűíàòà ńè ìđćæà (LAN)."
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Name: "
-msgstr "Èìć: "
+msgid ""
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr "Ìîëÿ, èçáćđćòć êîé ìđćæîâ àäàïòćđ äà èçïîëçâàì çà âđúçêà êúì Èíòćđíćò"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Áóêâà íà óńòđîéńòâîòî ïîä DOS: %s (ïđîńòî ïđćäïîëîæćíèć)\n"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "partition %s is now known as %s"
-msgstr "äÿë %s ńćăà ć èçâćńòćí êàòî %s"
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Removing %s"
-msgstr "Èçòđèâàíć íà %s"
+msgid "Internet Connection Sharing is now disabled."
+msgstr "Ńïîäćëÿíćòî íà Èíòćđíćò âđúçêàòà â ìîìćíòà ć èçêëțśćíî."
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Copying %s"
-msgstr "Êîïèđàíć íà %s"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Moving files to the new partition"
-msgstr "Ïđćìćńòè ôàéëîâćòć íà íîâ äÿë"
+msgid "Latin American"
+msgstr "Ëàòèíîàìćđèêàíńêà"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
-msgstr ""
-"Äèđćêòîđèÿòà %s âćść ńúäúđæà íÿêàêâè äàííè\n"
-"(%s)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Japanese text printing mode"
+msgstr "Ïđîìÿíà ńèńòćìàòà çà ïćśàò"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Hide files"
-msgstr "Ńêđèé ôàéëîâćòć"
+msgid "Old device file"
+msgstr "Ńòàđ ôàéë íà óńòđîńòâî"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Move files to the new partition"
-msgstr "Ïđćìćńòè ôàéëîâćòć íà íîâ äÿë"
+msgid "Info: "
+msgstr "Èíôîđìàöèÿ: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Ńëćä ôîđìàòèđàíć íà äÿëà %s, âńèśêè äàííè âúđőó íćăî ùć áúäàò çàăóáćíè"
+msgid "Button `%s': %s"
+msgstr "Áóòîí `%s': %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Òđÿáâà äà đćńòàđòèđàòć, ïđćäè ïđîìćíèòć äà âëÿçàò â ńèëà"
+msgid "Please wait"
+msgstr "Ìîëÿ èçśàêàéòć"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Òàáëèöàòà íà äÿëîâćòć íà óńòđîéńòâî %s ùć áúäć çàïèńàíà âúđőó äèńêà !"
+msgid "Genius NetMouse"
+msgstr "Genuis NetMouse"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "Ïàêćò %s ć íćîáőîäèì. Äà ăî èíńòàëèđàì?"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "None"
+msgstr "Ăîòîâî"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "What type of partitioning?"
-msgstr "Êàêúâ òèï đàçäćëÿíć íà äÿëîâć ?"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The entered IP is not correct.\n"
+msgstr "Âńèśêî ïđàâèëíî ëè ć ?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Âíèìàíèć: òàçè îïćđàöèÿ ć îïàńíà"
+msgid "Ethernet Card"
+msgstr "Ethernet êàđòà"
-#: ../../diskdrake/interactive.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "chunk size"
-msgstr "ăîëćìèíà íà ïàđśćòî"
+msgid "Info"
+msgstr "Èíôîđìàöèÿ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "level"
-msgstr "íèâî"
+msgid "Install"
+msgstr "Èíńòàëèđàé"
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#: ../../help.pm:1
#, c-format
-msgid "device"
-msgstr "óńòđîéńòâî"
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr ""
+"Öúêíćòć íà \"%s\", àêî èńêàòć äà èçòđèćòć âńèśêè äàííè è\n"
+"äÿëîâć ńúùćńòâóâàùè íà òîçè òâúđä äèńê. Âíèìàíèć, ńëćä öúêàíć íà \"%s\", "
+"íÿìà äà ìîæćòć äà âúçńòàíîâèòć êàêâèòî è äà áèëî äàííè è äÿëîâć ńúùćńòâóâàùè "
+"íà òîçè òâúđä äèńê,\n"
+"âêëțśèòćëíî êàêâèòî è äà ć Windows äàííè.\n"
+"\n"
+"Öúêíćòć \"%s\", çà äà îòìćíèòć òàçè îïćđàöèÿ áćç çàăóáà äà äàííèòć è\n"
+"äÿëîâćòć ńúùćńòâóâàùè íà òîçè òâúđä äèńê."
-#: ../../diskdrake/interactive.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Various"
-msgstr "Đàçëèśíè"
+msgid "Exit install"
+msgstr "Èçőîä îò èíńòàëàöèîííàòà ïđîăđàìà"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Mount options"
-msgstr "Îïöèè çà mount:"
+msgid ""
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
+msgstr ""
+"Âńèśêî ć íàńòđîćíî.\n"
+"Ńćăà ìîæćòć äà ńïîäćëèòć Èíòćđíćò âđúçêàòà ńè ń äđóăè êîìïțòđè â ëîêàëíàòà "
+"âè ìđćæà èçïîëçâàéêè àâòîìàòèśíà ìđćæîâà íàńòđîéêà (DHCP)."
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "File already exists. Use it?"
-msgstr "Ôàéëúò âćść ńúűćńòâóâà. Äà ăî èçïîëçâàì ëè ?"
+msgid "Remote CUPS server"
+msgstr "Îòäàëćśćí CUPS ńúđâúđ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "Ôàéëúò âćść ńć èçïîëçâà òî äđóă loopback, èçáćđćòć äđóă ôàéë."
+msgid "Sun - Mouse"
+msgstr "Ìèűêà íà Sun"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Give a file name"
-msgstr "Äàéòć èìć íà ôàéë"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
+msgstr ""
+"Â ńèńòćìàòà âè èìà ńàìî ćäèí íàńòđîćí ìđćæîâ àäàïòćđ:\n"
+"\n"
+"%s\n"
+"\n"
+"Ńìÿòàì äà óńòàíîâÿ ëîêàëíàòà âè ìđćæà íà òîçè àäàïòćđ."
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Filesystem type: "
-msgstr "Âèä ôàéëîâà ńèńòćìà: "
+msgid "Minimal install"
+msgstr "Ìèìèíàëíà èíńòàëàöèÿ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Size in MB: "
-msgstr "Ăîëćìèíà â MB: "
+msgid "Ethiopia"
+msgstr "Ćòèîïèÿ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Loopback file name: "
-msgstr "Èìć íà loopback ôàéëà: "
+msgid "Devanagari"
+msgstr "Äàâćíàäæàđè"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Loopback"
-msgstr "Loopback"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "Òîçè äÿë íć ìîæć äà áúäć èçïîëçâàí çà loopback"
+msgid "Total size: %d / %d MB"
+msgstr "Îáùà ăîëćìèíà: %d / %d MB"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "LVM name?"
-msgstr "LVM èìć ?"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "disabled"
+msgstr "èçêëțśè"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "new"
-msgstr "íîâ"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Search for new scanners"
+msgstr "Ëîêàëćí ïđèíòćđ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Èçáćđćòć ńúùćńòâóâàù LVM çà ïđèáàâÿíć"
+msgid "Disabling servers..."
+msgstr "Èçêëțśâàíć íà ńúđâúđè ..."
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Èçáćđćòć ńúùćńòâóâàù RAID çà ïđèáàâÿíć"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr "Ìîëÿ, èçáćđćòć ïàêćòèòć, êîèòî èńêàòć äà èíńòàëèđàòć."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Moving partition..."
-msgstr "Ìćńòâÿ äÿëà ... "
+msgid "Installation of %s failed. The following error occured:"
+msgstr "Èíńòàëàöèÿòà íà %s ïđîâàëćíà. Ïîÿâè ńć ńëćäíàòà ăđćűêà:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Moving"
-msgstr "Ìćńòćíć"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr "Íć ìîăà äà ńòàđòèđàì mkinitrd -f /boot/initrd-%s.img %s."
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "Íà êîé ńćêòîđ èńêàòć äà ăî ïđćìćńòèòć?"
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
+msgstr ""
+"Èçáđàëè ńòć ńëćäíèÿ(òć) ńúđâúđ(è): %s\n"
+"\n"
+"\n"
+"Òćçè ńúđâúđè ńć àêòèâèđàò ïî ïîäđàçáèđàíć. Òć íÿìàò èçâćńòíè ïđîáëćìè ńúń\n"
+"ńèăóđíîńòòà, íî ìîæć äà ńć íàìćđÿò íîâè. Â òîçè ńëóśàé, ùć òđÿáâà äà ńòć\n"
+"ńèăóđíè, ść ùć íàäăđàæäàòć âúçìîæíî íàé-áúđçî.\n"
+"\n"
+"\n"
+"Íàèńòèíà ëè èńêàòć äà èíńòàëèđàòć òćçè ńúđâúđè ?\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Sector"
-msgstr "Ńćêòîđ"
+msgid "Network printer (TCP/Socket)"
+msgstr "Ìđćæîâ ïđèíòćđ (TCP/Socket)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "Íà êîé äèńê èńêàòć äà ăî ïđćìćńòèòć ?"
+msgid "Backup User files..."
+msgstr "Đćçćđâíî êîïèć íà ïîòđćáèòćëńêè ôàéëîâć..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Move"
-msgstr "Ïđćìćńòè"
+msgid "Install system"
+msgstr "Èíńòàëèđàíć íà ńèńòćìàòà"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "New size in MB: "
-msgstr "Íîâà ăîëćìèíà â MB: "
+msgid "First DNS Server (optional)"
+msgstr "Ïúđâè DNS ńúđâúđ (ïî èçáîđ)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the new size"
-msgstr "Èçáćđćòć íîâà ăîëćìèíà"
+msgid ""
+"Alternatively, you can specify a device name/file name in the input line"
+msgstr ""
+"Àëòćđíàòèâíî, âèć ìîæć äà çàäàäćòć èìć íà óńòđîéńòâî/ôàéë â èçőîäíèÿ đćä"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Resize"
-msgstr "Ïđîìćíè ăîëćìèíàòà"
+msgid "dhcpd Config..."
+msgstr "Íàńòđîéêà íà dhcpd..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Ńëćä ïđîìÿíà ăîëćìèíàòà íà äÿëà %s, äàííète âúđőó íćăî ùć áúäàò çàăóáćíè"
+msgid "The setup has already been done, but it's currently disabled."
+msgstr "Óńòàíîâêàòà âćść ć íàïđàâćíà, íî â ìîìćíòà ć èçêëțśćíà."
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Âńèśêè äàííè íà òîçè äÿë òđÿáâà äà áúäàò àđőèâèđàíè"
+msgid "LILO/grub Installation"
+msgstr "LILO/grub èíńòàëàöèÿ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "This partition is not resizeable"
-msgstr "Ăîëćìèíàòà íà äÿëà íć ìîæć äà áúäć ïđîìćíćíà"
+msgid "Israeli"
+msgstr "Èçđàćëńêà"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Èçśèńëÿâàì ăđàíèöèòć íà fat ôàéëîâàòà ńèńòćìà"
+msgid "load setting"
+msgstr "óńòàíîâÿâàíć íà íàòîâàđâàíć"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "Êúäć èńêàòć äà ìîíòèđàòć óńòđîéńòâî %s ?"
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "Ïđèíòćđ \"%s\" íà ńúđâúđ \"%s\""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Íć ìîăà äà ìàőíà òîśêàòà íà ìîíòèđàíć, òúé êàòî äÿëúò ńć èçïîëçâà çà "
-"loopback.\n"
-"Ïúđâî ìàőíćòć loopback"
+msgid "Floppy can be removed now"
+msgstr "Ôëîïèòî ìîæć äà áúäć èçâàäćíî ńćăà"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Êúäć èńêàòć äà ìîíòèđàòć óńòđîéńòâî %s ?"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Truly minimal install"
+msgstr "Ìèìèíàëíà èíńòàëàöèÿ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "Êúäć èńêàòć äà ìîíòèđàòć loopback-ôàéëà %s ?"
+msgid "Denmark"
+msgstr "Äàíèÿ"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "Ïđćőîä îò ext2 êúì ext3"
+msgid "Moving partition..."
+msgstr "Ìćńòâÿ äÿëà ... "
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Which filesystem do you want?"
-msgstr "Êîÿ ôàéëîâà ńèńòćìà èńêàòć ?"
+msgid "(This) DHCP Server IP"
+msgstr "(Òîçè) DHCP ńúđâúđ IP"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Change partition type"
-msgstr "Ïđîìÿíà òèïà íà äÿëà"
+msgid "Test of the configuration"
+msgstr "Ïđîâćđêà íà íàńòđîéêàòà"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Installing %s ..."
+msgstr "Èíńòàëèđà %s ..."
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
+"\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
+"\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
+"\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
+"\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
msgstr ""
-"Ńëćä ïđîìÿíà íà òèïà íà äÿëà %s, âńèśêè äàííè âúđőó íćăî ùć áúäàò çàăóáćíè"
+"Íàêđàÿ, â çàâèńèìîńò îò èçáîđà âè äàëè äà èçáèđàòć ïàêćòè ćäèí ïî ćäèí, ùć\n"
+"âè áúäć ïđćäńòàâćíî äúđâî ńúäúđæàùî âńèśêè ïàêćòè ïîäđćäćíè ïî ăđóïè è\n"
+"ïîäđăđóïè. Äîêàòî îáőîæäàòć äúđâîòî, ìîæćòć äà èçáćđćòć öćëè ăđóïè, "
+"ïîäăđóïè\n"
+"èëè îòäćëíè ïàêćòè.\n"
+"\n"
+"Êîăàòî ïîńîśèòć ïàêćò îò äúđâîòî, ùć ńć ïîÿâè îïèńàíèć âäÿńíî. Êîăàòî\n"
+"èçáîđúò ć ïđèêëțśćí, öúêíćòć áóòîíà \"Èíńòàëèđàé\", êîéòî ùć ïóńíć ïđîöćńà\n"
+"íà èíńòàëàöèÿ. Â çàâèńèìîńò îò ńêîđîńòòà íà őàđäóćđà âè è áđîÿ íà ïàêćòèòć,\n"
+"êîèòî èńêàòć äà áúäàò èíńòàëèđàíè, ïđîöćńúò ìîæć äà îòíćìć èçâćńòíî âđćìć.\n"
+"Îśàêâàíîòî âđćìć çà ïđèêëțśâàíć íà ïđîöćńà, ść áúäć ïîêàçàíî íà ćêđàòà, çà\n"
+"äà âè ïîìîăíć äà ïđćöćíèòć äàëè èìàòć äîńòàòúśíî âđćìć äà ńć íàńëàäèòć íà\n"
+"śàűà êàôć.\n"
+"\n"
+"!! Àêî ć èçáđàí ńúđâúđćí ïàêćò, áèëî òî óìèűëćíî èëè çàùîòî ć śàńò îò öÿëà\n"
+"ăđóïà, ùć áúäćòć ïîìîëćíè çà ïîòâúđæäćíèć, ść íàèńòèíà èńêàòć òîçè ńúđâúđ\n"
+"äà áúäć èíńòàëèđàí. Â Mandrake Linux, âńèśêè ńúđâúđè òđúăâàò ïî "
+"ïîäđàçáèđàíć\n"
+"ïđè çàđćæäàíć.Äàæć àêî ńà ńèăóđíè è íÿìàò èçâćńòíè ïđîáëćìè, êîăàòî\n"
+"äèńòđèáóöèÿòà ńć đàçïđîńòđàíÿâà, ìîæć äà ńć ńëóśè òàêà, ść äà ńć ïîÿâÿò\n"
+"äóïêè â ńèăóđíîńòòà, ńëćä êàòî âćđńèÿòà íà Mandrake Linux ć çàâúđűćíà. Àêî\n"
+"íć çíàćòć çà êàêâî ńëóæè îïđćäćëćíà óńëóăà èëè çàùî ć èíńòàëèđàíà, öúêíćòć\n"
+"\"Íć\". Ń öúêàíć íà \"Äà\" ùć èíńòàëèđàòć èçáđîćíè óńëóăè è òć ùć áúäàò\n"
+"ńòàđòèđàíè àâòîìàòèśíî ïî ïîäđàçáèđàíć. !!\n"
+"\n"
+"Îïöèÿòà \"Àâòîìàòèśíè çàâèńèìîńòè\" èçêëțśâà ïđćäóïđćäèòćëíèòć äèàëîçè,\n"
+"êîăàòî èíńòàëàòîđúò àâîìàòèśíî đćűè èçáćđć ïàêćò. Òîâà ńć ńëóśâà, çàùîòî\n"
+"ć đćűèë, ść ńć íóæäàć äà çàäîâîëè çàâèńèìîńò ń äđóă ïàêćò, çà äà ïđèêëțśè\n"
+"óńïćűíî èíńòàëàöèÿòà.\n"
+"\n"
+"Ìàëêàòà èêîíêà íà äèńêćòêà â äúíîòî íà ńïèńúêà ïîçâîëÿâà äà çàđćäèòć ńïèńúê\n"
+"ń ïàêćòè îò ïđćäèűíà èíńòàëàöèÿ. Àêî öúêíćòć íà òàçè èêîíêà, ùć áúäćòć\n"
+"ïîìîëćíè äà âêàđàòć äèńêćòà ńúçäàäćíà ïđćäè òîâà â êđàÿ íà äđóăà "
+"èíńòàëàöèÿ.\n"
+"Âèæòć âòîđàòà ïîäńêàçêà ïî âđćìć íà ïîńëćäíàòà ńòúïêà, çà òîâà êàê äà\n"
+"ńúçäàäćòć òàêàâà äèńêćòà."
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Remove the loopback file?"
-msgstr "Äà ïđćìàőíà ëè loopback ôàéëà ?"
+msgid "Choose your filesystem encryption key"
+msgstr "Èçáîđ íà êđèïòèđàù êëțś çà ćàűàòà ôàéëîâà ńèńòćìà"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Preference: "
-msgstr "Ïđćäïîśèòàíèć: "
+msgid "Andorra"
+msgstr "Àíäîđà"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Start sector: "
-msgstr "Íàśàëćí ńćêòîđ: "
+msgid "Sierra Leone"
+msgstr "Ńèćđà Ëćîíć"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Create a new partition"
-msgstr "Ńúçäàé íîâ äÿë"
+msgid "Botswana"
+msgstr "Áîòńâàíà"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Use for loopback"
-msgstr "Èçïîëçâàé çà loopback"
+msgid "(default value: %s)"
+msgstr "(ïîäđàçáèđàùà ńòîéíîńò: %s)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Modify RAID"
-msgstr "Ìîäèôèöèđàé RAID"
+msgid "Alternative test page (Letter)"
+msgstr "Àëòćđíàòèâíà òćńòîâà ńòđàíèöà (Ïèńìî)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Remove from LVM"
-msgstr "Ïđćìàőíè îò LVM"
+msgid ""
+"DHCP Server Configuration.\n"
+"\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
+"\n"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Remove from RAID"
-msgstr "Ïđćìàőíè îò RAID"
+msgid "Choose an X server"
+msgstr "Èçáćđćòć X ńúđâúđ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Add to LVM"
-msgstr "Ïđèáàâè êúì LVM"
+msgid "Swap partition size in MB: "
+msgstr "Ăîëćìèíà íà swap-äÿëà â MB: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add to RAID"
-msgstr "Ïđèáàâè êúì RAID"
+msgid ""
+"Other (not drakbackup)\n"
+"keys in place already"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Format"
-msgstr "Ôîđìàòèđàé"
+msgid "No changes to backup!"
+msgstr "Íÿìà ïđîìćíè çà đćçćđâíî êîïèć!"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Detailed information"
-msgstr "Ïîäđîáíà èíôîđìàöèÿ"
+msgid "Formatted\n"
+msgstr "Ôîđìàòèđàí\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Trying to rescue partition table"
-msgstr "Îïèòâàì ńć äà ńïàńÿ òàáëèöàòà íà äÿëîâćòć"
+msgid "Type of install"
+msgstr "Òèï èíńòàëàöèÿ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Ńëîæćòć äèńêćòà âúâ ôëîïèòî\n"
-"Âńèśêè äàííè, íàìèđàùè ńć âúđőó äèńêćòàòà, ùć áúäàò çàăóáćíè"
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "Ïđèíòćđ \"%s\" íà SMB/Windows ńúđâúđ \"%s\""
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Warning"
-msgstr "Ïđćäóïđćæäćíèć"
+msgid ""
+"\n"
+"- Daemon (%s) include:\n"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Select file"
-msgstr "Èçáćđćòć ôàéë"
+msgid "%d comma separated numbers"
+msgstr "%d ńúń çàïćòàÿ đàçäćëćíè íîìćđà"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
msgstr ""
-"Đćçćđâíàòà òàáëèöà íà äÿëîâćòć íć ć ńúń ńúùàòà ăîëćìèíà\n"
-"Äà ïđîäúëæà ëè âńć ïàê ?"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Removable media automounting"
-msgstr "Àâòîìàòèśíî ìîíòèđàíć íà ńìćíÿćì íîńèòćë"
+"rusers ïđîòîêîëà ïîçâîëÿâà íà ìđćæîâèòć ïîòđćáèòćëè äà ïđîâćđÿâàò êîé ć\n"
+"âëÿçúë íà äđóăà îòăîâàđÿùàòà ìàűèíà."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Reload partition table"
-msgstr "Ïđćçàđćäè òàáëèöàòà ń äÿëîâćòć"
+msgid "Automatic Steps Configuration"
+msgstr "Íàńòđîéêà íà àâòîìàòèśíèòć ńòúïêè"
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Rescue partition table"
-msgstr "Ńïàńÿâàíć òàáëèöàòà ń äÿëîâćòć"
+msgid ""
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
+msgstr ""
+"Êàêâî èńêàòć äà çíàćòć ïîâćść çà îáùíîńòòà íà Îòâîđćíèÿò èçőîäćí êîä? Âëćçòć "
+"â ńâćòà íà Ńâîáîäíèÿò Ńîôòóćđ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore partition table"
-msgstr "Âúçńòàíîâè òàáëèöàòà ń äÿëîâćòć"
+msgid "Barbados"
+msgstr "Áàđáàäîń"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Save partition table"
-msgstr "Çàïàçè òàáëèöàòà ń äÿëîâćòć"
+msgid "Please select data to backup..."
+msgstr "Ìîëÿ, èçáćđćòć äàííè çà đćçćđâíî êîïèć..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
msgstr ""
-"Àêî èńêàòć îùć äÿëîâć, ìîëÿ èçòđèéòć ćäèí, çà äà ìîæćòć äà ńúçäàäćòć ćäèí "
-"đàçűèđćí äÿë"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "I can't add any more partition"
-msgstr "Íć ìîăà äà äîáàâÿ ïîâćść äÿëîâć"
+"Âđúçêàòà ïđîïàäíà.\n"
+"Ïđîâćđćòć ńè êîíôèăóđàöèÿòà â Êîíòđîëćí öćíòúđ íà Mandrake."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "All primary partitions are used"
-msgstr "Âńèśêè ïúđâèśíè äÿëîâć ńć èçïîëçâàò"
+msgid "received"
+msgstr "ïîëóśćíè"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Hard drive information"
-msgstr "Èíôîđìàöèÿòà çà òâúđäèÿ äèńê"
+msgid "/File/_New"
+msgstr "/Ôàéë/_Íîâ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Auto allocate"
-msgstr "Àâòîìàòèśíî ńúçäàâàíć"
+msgid "The DNS Server IP"
+msgstr "DNS ńúđâúđ IP"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Clear all"
-msgstr "Èçśèńòè âńèśêî"
+msgid "IP Range End:"
+msgstr "Êđàé íà IP îáőâàò:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Èńêàòć ëè äà çàïàçèòć ïđîìćíèòć â /etc/fstab"
+msgid "High"
+msgstr "Âèńîêî"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Èçőîä, áćç äà çàïèń íà òàáëèöàòà íà äÿëîâćòć ?"
+msgid "NoVideo"
+msgstr "Áćç ăđàôèêà"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Quit without saving"
-msgstr "Èçőîä áćç çàïèń"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "this field describes the device"
+msgstr "Òîâà ïîëć îïèńâà óńòđîéńòâîòî"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Continue anyway?"
-msgstr "Ïđîäúëæćíèć âúïđćêè âńèśêî ?"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Äîáàâÿíć íà ïđèíòćđ íà Star Office/OpenOffice.org/GIMP"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Toggle to expert mode"
-msgstr "Ïđćìèíè â Ćêńïćđòćí đćæèì"
+msgid "Local Printers"
+msgstr "Ëîêàëíè ïđèíòćđè"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Toggle to normal mode"
-msgstr "Ïđćìèíè â Íîđìàëćí đćæèì"
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Installation image directory"
+msgstr "Xpmac (èíńòàëàöèÿ ăđàôèśćí äđàéâćđ)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Undo"
-msgstr "Âúđíè"
+msgid "NIS Server"
+msgstr "NIS ńúđâúđ"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Exit"
-msgstr "Èçëćç"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Port: %s"
+msgstr "Ïîđò"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose a partition"
-msgstr "Èçáćđćòć äÿë"
+msgid "Spain"
+msgstr "Èńïàíèÿ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Choose another partition"
-msgstr "Èçáćđćòć äđóă äÿë"
+msgid "This user name has already been added"
+msgstr "Òîâà ïîòđćáèòćëńêî èìć âćść ć äîáàâćíî"
-#: ../../diskdrake/removable.pm:1
+#: ../../interactive.pm:1
#, c-format
-msgid "Change type"
-msgstr "Ïđîìÿíè òèïà"
+msgid "Choose a file"
+msgstr "Èçáćđćòć ôàéë"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Search servers"
-msgstr "Òúđńè ńúđâúđè"
+msgid "Apply"
+msgstr "Ïđèëîæè"
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Domain"
-msgstr "Äîìćéí"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Auto-detect available ports"
+msgstr "Èçïîëçâàé àâòîìàòèśíî çàńèśàíć"
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Username"
-msgstr "Ïîòđćáèòćëńêî èìć"
+msgid "Internet Connection Sharing currently disabled"
+msgstr "Ńïîäćëÿíćòî íà Èíòćđíćò âđúçêàòà ć èçêëțśćíî."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please enter your username, password and domain name to access this host."
-msgstr ""
-"Ìîëÿ, âúâćäćòć âàűćòî èìć, ïàđîëà è èìć íà äîìćéí çà äîńòúï äî òîçè őîńò."
+msgid "San Marino"
+msgstr "Ńàí Ìàđèíî"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Domain Authentication Required"
-msgstr "Èçèńêâà Èäćíòèôèêàöèÿ çà Äîìćéí"
+msgid "Belgium"
+msgstr "Áćëăèÿ"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Another one"
-msgstr "Äđóăî"
+msgid "Kuwait"
+msgstr "Êóâćéò"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which username"
-msgstr "Êîć ïîòđćáèòćëńêî èìć"
+msgid "Choose the window manager to run:"
+msgstr "Èçáćđćòć ìćíèäæúđ íà ïđîçîđöè çà ńòàđòèđàíć:"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Can't login using username %s (bad password?)"
-msgstr "Íć ìîăà äà âëÿçà êàòî èçïîëçâàì èìć %s (ăđćűíà ïàđîëà?)"
+msgid "sub generation of the cpu"
+msgstr ""
-#: ../../harddrake/data.pm:1
-#, c-format
-msgid "cpu # "
-msgstr "cpu # "
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "First Time Wizard"
+msgstr "Äîáđć äîűëè â ïúđâîíàśàëíèÿ ïîìîùíèê"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "SMBus controllers"
-msgstr "SMBus êîíòđîëćđè"
+msgid ""
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
+msgstr ""
+"Ïîÿâè ńć ăđćűêà, íî íć çíàì êàê äà ńć ńïđàâÿ ń íćÿ äćëèêàòíî.\n"
+"Ìîæćòć äà ïđîäúëæèòć íà ńâîé đèńê."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "USB controllers"
-msgstr "USB êîíòđîëćđè"
+msgid "please wait, parsing file: %s"
+msgstr "ìîëÿ èçśàêàéòć, ïđàâÿ đàçáîđ íà ôàéë: %s"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "SCSI controllers"
-msgstr "SCSI êîíòđîëćđè"
-
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Firewire controllers"
-msgstr "USB êîíòđîëćđè"
+msgid "Taiwan"
+msgstr "Òàéâàí"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "(E)IDE/ATA êîíòđîëćđè"
+msgid "Pakistan"
+msgstr "Ïàêèńòàí"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Joystick"
-msgstr "Äæîéńòèê"
+msgid ""
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
+msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Scanner"
-msgstr "Ńêćíćđ"
+msgid "Permissions"
+msgstr "Ïđàâà"
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Unknown/Others"
-msgstr "Íćèçâćńòíè/Äđóăè"
+msgid "Provider name (ex provider.net)"
+msgstr "Èìć íà äîńòàâśèêà (íàïđ. provider.net)"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Bridges and system controllers"
-msgstr "Áđèäæîâć è ńèńòćìíè êîíòđîëćđè"
+msgid "Version: %s\n"
+msgstr "Âćđńèÿ: %s\n"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Modem"
-msgstr "Ìîäćì"
+msgid ""
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
+msgstr ""
+"Âàűàòà ńèńòćìà ć ń ìàëêè đćńóđńè. Ìîæć äà èìàòć ïđîáëćìè ń èíńòàëèđàíćòî\n"
+"íà Mandrake Linux. Àêî ńć ïîÿâè ïđîáëćì îïèòàéòć ń òćêńòîâàòà èíńàëàöèÿ. "
+"Çàöćëòà,\n"
+"íàòèńíćòć 'F1', êîăàòî ńòàđòèđàòć îò CDROM è âúâćäćòć 'òćüò'."
-#: ../../harddrake/data.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Ethernetcard"
-msgstr "Ethernet êàđòà"
+msgid "Use the Windows partition for loopback"
+msgstr "Èçïîëçâàé çà Windows äÿëúò çà loopback"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Processors"
-msgstr "Ïđîöćńîđè"
+msgid "Armenian (typewriter)"
+msgstr "Àđìćíńêà (ïèűćùà ìàűèíà)"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Webcam"
-msgstr ""
+msgid "Connection type: "
+msgstr "Òèï íà âđúçêàòà: "
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Soundcard"
-msgstr "Çâóêîâà êàđòà"
+msgid "Graphical interface"
+msgstr "Ăđàôèśćí èíòćđôàéń"
-#: ../../harddrake/data.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Other MultiMedia devices"
-msgstr "Äđóăà ìóëòèìćäèéíè óńòđîéńòâà"
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s ń őàđäóćđíî 3D óńêîđćíèć"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Tvcard"
-msgstr "TV êàđòà"
+msgid "India"
+msgstr "Èíäèÿ"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Videocard"
-msgstr "Âèäćî êàđòà"
+msgid "Chad"
+msgstr "Śàä"
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Tape"
-msgstr "Ëćíòà"
+msgid "Slovakia"
+msgstr "Ńëîâàêèÿ"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
+msgid "Singapore"
+msgstr "Ńèíăàïóđ"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "CD/DVD burners"
-msgstr "CD/DVD çàïèńâàùî"
+msgid "Cambodia"
+msgstr "Êàìáîäæà"
-#: ../../harddrake/data.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "CDROM"
-msgstr "CDROM"
+msgid "Monitor HorizSync: %s\n"
+msgstr "Őîđèçîíòàëíà ńèíőđîíèçàöèÿ íà ìîíèòîđà: %s\n"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Disk"
-msgstr "Äèńê"
+msgid "Path"
+msgstr "Ïúò"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Zip"
-msgstr "Zip óńòđîéńòâî"
+msgid ""
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
+msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Floppy"
-msgstr "Ôëîïè"
+msgid ""
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
+msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Let me pick any driver"
-msgstr "Íćêà èçáćđà äđàéâćđ"
+msgid ""
+"Printer %s\n"
+"What do you want to modify on this printer?"
+msgstr ""
+"Ïđèíòćđ %s\n"
+"Êàêâî èńêàòć äà ïîïđàâèòć ïî òîçè ïđèíòćđ ?"
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Driver:"
-msgstr "Äđàéâćđ: "
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Add host"
+msgstr "Äîáàâè ïîòđćáèòćë"
#: ../../harddrake/sound.pm:1
#, c-format
@@ -8535,140 +8574,97 @@ msgstr ""
"\n"
"Òćêóùî èçïîëçâàíèÿò äđàéâćđ çà âàűàòà \"%s\" çâóêîâà êàđòà ć \"%s\" "
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr "Èçáîđ íà ńëóśàćí äđàéâćđ"
-
-#: ../../harddrake/sound.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+"\"Custom\" permit a per-user granularity.\n"
msgstr ""
+"Èńêàòć ëè äà ïîçâîëèòć íà ïîòđćáèòćëè äà ïîäćëÿò òćőíèòć äèđćêòîđèè?\n"
+"Đàçđćűàâàíćòî íà òîâà ùć ïîçâîëè íà ïîòđćáèòćëèòć ïđîńòî äà öúêíàò íà "
+"\"Ïîäćëÿ\" â konqueror èëè nautilus.\n"
+"\n"
+"\"Êëèćíòńêà\" ïîçâîëÿâà çà ïîòđćáèòćë íàńòđîéêà.\n"
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Sound trouble shooting"
-msgstr "Çàòđóäíćíèÿ ïđè çâóê"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
+msgstr ""
+"Ìîæć èçáćđćòć çàđćæäàíć èëè çàïèń íà èçáîđà íà ïàêćòè íà ôëîïè.\n"
+"Ôîđìàòúò ć ńúùèÿò êàòî auto_install ăćíćđèđàíèòć äèńêćòè."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "Ăđćűêà: \"%s\" äđàéâćđ çà âàűàòà êàđòà ć èíńòàëèđàí"
+msgid "China (broadcast)"
+msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unkown driver"
-msgstr "Íćèçâćńòćí äđàéâćđ"
+msgid "Use quota for backup files."
+msgstr "Èçïîëçâà êâîòà çà ôàéëîâć íà đćçćđâíî êîïèć."
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "Íÿìà äđàéâćđ çà âàűàòà çâóêîâà êàđòà (%s)"
+msgid "Configuring printer \"%s\"..."
+msgstr "Íàńòđîéêà íà ïđèíòćđà \"%s\"..."
-#: ../../harddrake/sound.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "No known driver"
-msgstr "Íÿìà èçâćńòćí äđàéâćđ"
+msgid "Internet connection"
+msgstr "Èíòćđíćò âđúçêà"
-#: ../../harddrake/sound.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
msgstr ""
-"Íÿìà ńâîáîäćí äđàéâćđ çà âàűàòà çâóêîâà êàđòà (%s), íî èìà ńîáńòâćíè äđàéâćđ "
-"íà \"%s\"."
+"Çàđćæäàíćòî íà ìîäóëà %s íć óńïÿ.\n"
+"Èńêàòć ëè äà îïèòàòć îòíîâî ń äđóăè ïàđàìćòđè ?"
-#: ../../harddrake/sound.pm:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "No open source driver"
-msgstr ""
+msgid "Welcome to the Open Source world."
+msgstr "Äîáđć äîűëè â ńâćòà íà Îòâîđćíèÿò Èçőîäćí êîä"
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Ìîëÿ, ïîśàêàéòć ... Ïđèëàăàíć íà íàńòđîéêèòć"
+msgid "Bosnia and Herzegovina"
+msgstr "Áîńíà è Őćđöćăîâèíà"
-#: ../../harddrake/sound.pm:1
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
-msgstr ""
-
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Trouble shooting"
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
msgstr ""
+"Íóæäàćòć ńć îò èńòèíńêà ôàéëîâà ńèńòćìà (ext2, reiserfs,xfs, èëè jfs) çà "
+"òàçè òîśêà íà ìîíòèđàíć\n"
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
-msgstr ""
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "You must enter a host name or an IP address.\n"
+msgstr "Ìîëÿ, ïđîáâàéòć ìèűêàòà ńè"
-#: ../../harddrake/sound.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
-msgstr ""
-"\n"
-"\n"
-"Âàűàòà êàđòà â ìîìćíòà èçïîëçâà %s\"%s\" äđàéâćđ (ïîäđàçáèđàù äđàéâćđ çà "
-"êàđòàòà âè ć \"%s\")"
+msgid "Netherlands"
+msgstr "Őîëàíäèÿ"
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr ""
-"Òóê ìîæć äà èçáćđćòć àëòćđíàòèâćí äđàéâćđ (OSS èëè ALSA) çà âàűàòà çâóêîâà "
-"êàđòà (%s)."
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "Èçïđàùàì ôàéëîâć..."
-#: ../../harddrake/sound.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Sound configuration"
-msgstr "Íàńòđîéêà çà çâóê"
+msgid "Internal ISDN card"
+msgstr "Âúòđćűíà ISDN êàđòà"
#: ../../harddrake/sound.pm:1
#, c-format
@@ -8679,1666 +8675,1634 @@ msgstr ""
"Íÿìà èçâćńòíćí OSS/ALSA àëòćđíàòèâćí äđàéâćđ çà âàűàòà çâóêîâà êàđòà (%s) "
"êîÿòî â ìîìćíòà èçïîëçâà \"%s\""
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "No alternative driver"
-msgstr "Íÿìà àëòćđíàòèâćí äđàéâćđ"
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "enable radio support"
-msgstr "đàçđćűàâà ïîäđúæêà íà đàäèî"
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Radio support:"
-msgstr "Ïîäđúæêà íà đàäèî:"
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "PLL setting:"
-msgstr "PLL íàńòđîéêè:"
-
-#: ../../harddrake/v4l.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr ""
+msgid "Title"
+msgstr "Çàăëàâèć"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Number of capture buffers:"
+msgid "Install & convert Fonts"
msgstr ""
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Tuner type:"
-msgstr "Òèï íà òóíćđ:"
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Card model:"
-msgstr "Ìîäćë íà êàđòà:"
-
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
+msgid "WARNING"
msgstr ""
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Unknown|Generic"
-msgstr "Íćèçâćńòćí|Îáù"
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "Íćèçâćńòćí|CPH06X (bt878) [ìíîăî ïđîèçâîäèòćëè]"
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "Íćèçâćńòćí|CPH05X (bt878) [ìíîăî ïđîèçâîäèòćëè]"
-
-#: ../../harddrake/v4l.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Auto-detect"
-msgstr "Àâòîìàòèśíî çàńèśàíć"
+msgid "Installing bootloader"
+msgstr "Èíńòàëèđàíć íà bootloader"
-#: ../../interactive/newt.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Do"
-msgstr "Íàïđàâè"
+msgid "replay"
+msgstr "ïîâòîđè"
-#: ../../interactive/stdio.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Âàűèÿò èçáîđ ? (ïî ïîäđàçáèđàíć ć %s)"
+msgid "detected %s"
+msgstr "çàńćśćíà %s"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Ëîű èçáîđ, îïèòàéòć îòíîâî\n"
+msgid "Virgin Islands (U.S.)"
+msgstr "Âèđäæèíńêè Îńòđîâè (ŃÀÙ)"
-#: ../../interactive/stdio.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Re-submit"
-msgstr ""
+msgid "Bad backup file"
+msgstr "Ëîű backup-ôàéë"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"=> Notice, a label changed:\n"
-"%s"
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"=> çàáćëćæêà, ïđîìćíćí ćòèêćò:\n"
-"%s"
+"Óńòàíîâêàòà íà Ńïîäćëÿíćòî íà Èíòćđíćò âđúçêàòà ć âćść çàâúđűćíà.\n"
+"Â ìîìćíòà ć èçêëțśćíà.\n"
+"\n"
+"Êàêâî èńêàòć äà íàïđàâèòć ?"
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
+msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Èìà ìíîăî íćùà çà èçáîđ îò (%s).\n"
-
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Âàűèÿò èçáîđ ? (ïî ïîäđàçáèđàíć ć `%s'%s) "
+msgid "Pipe into command"
+msgstr "Ïđîăđàìćí êàíàë êúì êîìàíäà"
-#: ../../interactive/stdio.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid " enter `void' for void entry"
+msgid ""
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
msgstr ""
+"Śàńò îò őàđäóćđà íà êîìïțòúđà âè ńć íóæäàć îò ``ńîáńòâćíèòć ńè'' äđàéâćđè, "
+"çà äà đàáîòè.\n"
+"Ìîæćòć äà íàìćđèòć ïîâćść èíôîđìàöèÿ çà òîâà íà: %s"
-#: ../../interactive/stdio.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do you want to click on this button?"
-msgstr "Èńêàòć ëè äà öúêíćòć íà òîçè áóòîí?"
+msgid "Detecting devices..."
+msgstr "Îòêđèâàíć íà óńòđîéńòâà ..."
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Button `%s': %s"
-msgstr "Áóòîí `%s': %s"
+msgid "Click here to launch the wizard ->"
+msgstr "Öúêíćòć òóê, çà äà ńòàđòèđàòć ìàăüîńíèêà ->"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Âàűèÿò èçáîđ ? (ïî ïîäđàçáèđàíć ć `%s')"
+msgid "Haiti"
+msgstr "Őàèòè"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Entries you'll have to fill:\n"
-"%s"
+"Description of the fields:\n"
+"\n"
msgstr ""
-"Çàïèńèòć êîèòî âèć ùć òđÿáâà äà çàïúëíèòć:\n"
-"%s"
+"Îïèńàíèć íà ïîëćòàòà:\n"
+"\n"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the name of the CPU"
+msgstr "èìćòî íà ïđîèçâîäèòćëÿ íà óńòđîéńòâîòî"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Çàđćæäàíćòî íà ìîäóëà %s íć óńïÿ.\n"
-"Èńêàòć ëè äà îïèòàòć îòíîâî ń äđóăè ïàđàìćòđè ?"
+msgid "Refreshing printer data..."
+msgstr "Îïđćńíÿâàíć íà äàííèòć îò ïđèíòćđà ..."
-#: ../../modules/interactive.pm:1
+#: ../../install2.pm:1
#, c-format
-msgid "Specify options"
-msgstr "Çàäàé îïöèè"
+msgid "You must also format %s"
+msgstr "Âèć òđÿáâà ńúùî äà ôîđìàòèđàòć %s"
-#: ../../modules/interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Autoprobe"
-msgstr "Àâòîìàòèśíî çàńèśàíć"
+msgid "Be careful: this operation is dangerous."
+msgstr "Âíèìàíèć: òàçè îïćđàöèÿ ć îïàńíà"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Â íÿêîè ńëóśàè, %s äđàéâćđúò ńć íóæäàć îò äîïúëíèòćëíà èíôîđìàöèÿ, çà\n"
-"äà đàáîòè êîđćêòíî, âúïđćêè ść íîđìàëíî đàáîòè è áćç íćÿ. Æćëàćòć ëè "
-"äàïîäàäćòć\n"
-"äîïúëíèòćëíè îïöèè çà íćăî èëè äà đàçđćűèòć íà äđàéâćđà äà ïîòúđńè "
-"èíôîđìàöèÿòà\n"
-"îò êîÿòî ńć íóæäàć ? Ïî ïđèíöèï òîâà ìîæć äà çàáèć êîìïțòúđà âè, íî íÿìà äà "
-"ăî ïîâđćäè."
+msgid "Insert a floppy containing package selection"
+msgstr "Ńëîæćòć äèńêćòà ńúäúđæàùà èçáîđ íà ïàêćòè"
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Êîé %s äđàéâćđ äà ïđîáâàì ?"
+msgid "Server: "
+msgstr "Ńúđâúđ: "
-#: ../../modules/interactive.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Module options:"
-msgstr "Îïöèè íà ìîäóëà:"
+msgid "Security Alerts:"
+msgstr "Ïđćäóïđćæäćíèÿ çà çàùèòà:"
-#: ../../modules/interactive.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Ńćăà ìîæćòć äà ïîäàäćòć îïöèèòć ìó äî ìîäóëà %s.\n"
-"Îïöèèòć ńà âúâ ôîđìàò ``èìć=ńòîéíîńò èìć2=ńòîéíîńò2 ...''.\n"
-"Íàïđèìćđ: ``io=0x300 irq=7''"
+msgid "Sweden"
+msgstr "Űâćöèÿ"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+msgid "Use Expect for SSH"
msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "(module %s)"
-msgstr "(ìîäóë %s)"
+msgid "Poland"
+msgstr "Ïîëűà"
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Èíńòàëèđàíć íà äđàéâćđ çà %s ïëàòêà %s"
+msgid "Importance: %s\n"
+msgstr "Âàæíîńò: %s\n"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "See hardware info"
-msgstr "Âèæ őàđäóćđíàòà èíôîđìàöèÿ"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr ""
+"Ìîëÿ, ïđîâćđćòć äàëè èńêòć äà èçâàäèòć ëćíòàòà ńëćä êàòî ïđàâèòć đćçćđâíî "
+"êîïèć."
-#: ../../modules/interactive.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Èìàòć ëè íÿêàêúâ %s èíòćđôćéń?"
+msgid "Other ports"
+msgstr "Äđóăè ïîđòîâćòć"
-#: ../../modules/interactive.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Do you have another one?"
-msgstr "Èìàòć ëè äđóă(è) ?"
+msgid "number of capture buffers for mmap'ed capture"
+msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Íàìćđćíè ńà %s %s èíòćđôćéńè"
+msgid "SMBus controllers"
+msgstr "SMBus êîíòđîëćđè"
-#: ../../modules/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "Âèć ìîæć äà êîíôèăóđèđàòć âńćêè ïàđàìćòúđ íà ìîäóëúò òóê."
+msgid "Connection timeout (in sec)"
+msgstr "Timeout íà âđúçêàòà (â ńćê)"
-#: ../../modules/parameters.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "comma separated strings"
-msgstr "íèçîâć đàçäćëćíè ńúń çàïćòàÿ"
+msgid ""
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
+msgstr ""
-#: ../../modules/parameters.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "comma separated numbers"
-msgstr "íîìćđà đàçäćëćíè ńúń çàïćòàÿ"
+msgid "Croatian"
+msgstr "Őúđâàòńêà"
-#: ../../modules/parameters.pm:1
-#, c-format
-msgid "%d comma separated strings"
-msgstr "%d ńúń çàïćòàÿ đàçäćëćí íèç"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Use existing partition"
+msgstr "Èçïîçâàíć íà ńúùćńòâóâàù äÿë"
-#: ../../modules/parameters.pm:1
-#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d ńúń çàïćòàÿ đàçäćëćíè íîìćđà"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Unable to contact mirror %s"
+msgstr "Íć ìîăà äà íàïđàâÿ 'fork': %s"
-#: ../../modules/parameters.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "a number"
-msgstr "íîìćđ"
+msgid "/Help/_About..."
+msgstr "/Ïîìîù/_Îòíîńíî..."
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
+msgid "Remove user directories before restore."
msgstr ""
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
msgstr ""
-"Íàé-śćńòèÿ íàśèí çà ńâúđçâàíć śđćç ADSL ć PPPOE.\n"
-"Íÿêîè âđúçêè èçïîëçâàò PPTP, à maëêî èçïîëçâàò DHCP.\n"
-"Àêî íć çíàćòć, èçáćđćòć 'èçïîëçâàé PPPOE'."
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
-#, c-format
-msgid "Connect to the Internet"
-msgstr "Ńâúđæè ńć êúì Èíòćđíćò"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "CUPS printer configuration"
+msgstr "Êîíôèăóđàöèÿ íà CUPS ïîäćëćí ïđèíòćđ"
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Sagem (using pppoa) usb"
-msgstr "Sagem (èçïîëçâà pppoa) usb"
+msgid "could not find any font in your mounted partitions"
+msgstr ""
-#: ../../network/adsl.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch USB"
+msgid "F00f bug"
+msgstr ""
-#: ../../network/adsl.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "use dhcp"
-msgstr "èçïîëçâàé DHCP"
+msgid "XFree %s"
+msgstr "XFree %s"
-#: ../../network/adsl.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "use pptp"
-msgstr "èçïîëçâàé PPPTP"
+msgid ""
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
+msgstr ""
+"Êàêúâ DHCP êëèćíò èńêàòć äà èçïîëçâàòć ?\n"
+"Ïî ïîäđàçáèđàíć ć dhcp-client ?"
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "use pppoe"
-msgstr "èçïîëçâàé PPPOE"
+msgid "Domain Name:"
+msgstr "Èìć íà äîìćéíà:"
-#: ../../network/drakfirewall.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Other ports"
-msgstr "Äđóăè ïîđòîâćòć"
+msgid "On Floppy"
+msgstr "Çàïàçâà íà äèńêćòà"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Everything (no firewall)"
-msgstr "Âńèśêî (áćç firewall)"
+msgid "Restore"
+msgstr "Âúçńòàíîâÿâà"
-#: ../../network/drakfirewall.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
+msgid "if set to yes, check if the network devices are in promiscuous mode."
msgstr ""
-"Çàäàäćí ć ăđćűćí ïîđò: %s.\n"
-"Ôîđìàòúò ć \"port/tcp\" èëè \"port/udp\", \n"
-"êúäćòî ïîđò ć ìćæäó 1 è 65535."
-#: ../../network/drakfirewall.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
-msgstr ""
-"Âèć ìîæć äà âúâćäćòć äđóăè ïîđòîâć. \n"
-"Âàëèäíè ńà íàïđèìćđ: 139/tcp 139/udp.\n"
-"Ïîăëćäíćòć â /etc/services çà èíôîđìàöèÿ"
+msgid "Looking for available packages..."
+msgstr "Òúđńÿ íàëèśíè ïàêćòè..."
-#: ../../network/drakfirewall.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr ""
+msgid "Init Message"
+msgstr "Ńòàđòîâî ńúîáùćíèć"
-#: ../../network/drakfirewall.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-"drakfirewall êîíôèăóđàöèÿ\n"
-"\n"
-"Óáćäćòć ńć, ść âèć èìàòć êîíôèăóđèđàí Èíòćđíćò/Èíòđàíćò äîńòúï ń\n"
-"drakconnect ïđćäè äà ïđàâèòć äđóăè íćùà ïî-íàòàòúê."
+msgid "Rescue partition table"
+msgstr "Ńïàńÿâàíć òàáëèöàòà ń äÿëîâćòć"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Íàńòđîéśèê çà ìàëêà çàùèòíà ńòćíà\n"
-"\n"
-"Òîâà íàńòđîéâà ïćđńîíàëíà çàùèòíà ńòćíà çà òàçè Mandrake Linux ìàűèíà.\n"
-"Çà ìîùíî ïîńòâćòćíî íà çàùèòàòà đćűćíèć, ìîëć, ïîăëćäíćòć ńïćöèàëèçèđàíàòà\n"
-"MandrakeSecurity Firewall äèńòđèáóöèÿ."
+msgid "Connection complete."
+msgstr "Âđúçêàòà ć óńòàíîâćíà."
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No network card"
-msgstr "Íÿìà îòêđèòà ìđćæîâà êàđòà"
+msgid "Cyprus"
+msgstr "Êèïúđ"
-#: ../../network/drakfirewall.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "POP and IMAP Server"
-msgstr "POP è IMAP ńúđâúđ"
+msgid "Remove from RAID"
+msgstr "Ïđćìàőíè îò RAID"
-#: ../../network/drakfirewall.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mail Server"
-msgstr "Ïîùćíńêè ńúđâúđ"
+msgid "This encryption key is too simple (must be at least %d characters long)"
+msgstr ""
+"Êđèïòèđàù êëțś ć ïđćêàëćíî ïđîńò (òđÿáâà äà áúäć äúëăà ïîíć %d ńèìâîëà)"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Domain Name Server"
-msgstr "Domain Name Server"
+msgid "Configuration Wizards"
+msgstr "Êîíôèăóđàöèîííè Ìàăüîńíèöè"
-#: ../../network/drakfirewall.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Web Server"
-msgstr "Web Ńúđâúđ"
+msgid "ISDN connection"
+msgstr "ISDN âđúçêà"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr ""
+msgid "primary"
+msgstr "ïúđâè"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Host name"
-msgstr "Èìć íà őîńò:"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr " íà SMB/Windows ńúđâúđ \"%s\", ïîäćëćí \"%s\""
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Zeroconf Host name"
-msgstr "Èìć íà őîńò:"
-
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
msgid ""
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
msgstr ""
+"Ńćăà ìîæćòć äà èçáćđćòć êîè óńëóăè äà ńć ïóńêàò ïđè ńòàđòèđàíć.\n"
+"\n"
+"Òóê ńà ïđćäńòàâćíè âńèśêè óńëóăè, äîńòúïíè ń íàńòîÿùàòà èíńòàëàöèÿ.\n"
+"Ïđćăëćäàéòć ăè âíèìàòćëíî è èçêëțśćòć òćçè, êîèòî íć âè òđÿáâàò âèíàăè ïđè "
+"ńòàđòèđàíć.\n"
+"\n"
+"Ìîæćòć âèäèòć êđàòúê îáÿńíèòćëćí òćêńò çà óńëóăàòà, êàòî ïîńòàâèòć êóđîđà íà "
+"ìèűêàòà ńè\n"
+"íàä èìćòî íà óńëóăàòà. Àêî íć ńòć ńèăóđíè, äàëè óńëóăàòà ć ïîëćçíà èëè íć, "
+"ïî-äîáđć\n"
+"ć äà îńòàâèòć èçáîđà ïî ïîäđàçáèđàíć.\n"
+"\n"
+"Âíèìàâàéòć ń òàçè ńòúïêà, àêî ńìÿòàòć äà èçïîëçâàòć ìàűèíàòà ńè êàòî "
+"ńúđâúđ:\n"
+"ńèăóđíî íć áèőòć èńêàëè äà ïóńêàòć óńëóăè, îò êîèòî íć ńć íóæäàćòć. Ìîëÿ,\n"
+"çàïîìíćòć, ść íÿêîè óńëóăè ìîăàò äà áúäàò îïàńíè, àêî ńà âêëțśćíè íà "
+"ńúđâúđà.\n"
+"Ïî ïđèíöèï, èçáèđàéòć ńàìî óńëóăèòć, îò êîèòî íàèńòèíà ńć íóæäàćòć."
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
-msgid "Configuring network"
-msgstr "Íàńòîéêà íà ìđćæàòà"
-
-#: ../../network/ethernet.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
-msgstr "Ìîëÿ, èçáćđćòć êîé ìđćæîâ àäàïòćđ äà èçïîëçâàì çà âđúçêà êúì Èíòćđíćò"
+msgid "Skip"
+msgstr "Ïđćńêàśà"
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose the network interface"
-msgstr "Èçáćđćòć ìđćæîâ èíòćđôćéń"
+msgid "Niue"
+msgstr "Íèț"
-#: ../../network/ethernet.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
msgstr ""
-"Íć áćűć íàìćđćí ìđćæîâ àäàïòćđ â ńèńòćìàòà âè.\n"
-"Íć ìîæćòć äà íàńòđîèòć òàêúâ âèä âđúçêà."
+"Àêòèâèđà/äćàêòèâèđà âńèśêè ìđćæîâè èíòćđôćéńè, íàńòđîćíè äà ńć ïóńêàò\n"
+"ïđè ńòàđòèđàíć íà ìàűèíàòà."
-#: ../../network/ethernet.pm:1
-#, c-format
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
-msgstr ""
-"Êàêúâ DHCP êëèćíò èńêàòć äà èçïîëçâàòć ?\n"
-"Ïî ïîäđàçáèđàíć ć dhcp-client ?"
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
+msgstr "Śćńòîòà íà ïđîöćńîđà â Mhz"
-#: ../../network/isdn.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Íć ć íàìćđćíà ISDN PCI êàđòà. Ìîëÿ èçáćđćòć îò ńëćäâàùèÿò ćêđàí."
+msgid "important"
+msgstr "âàæćí"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
+msgid "Total Progress"
msgstr ""
-"Îòêđèòà ć ISDN PCI êàđòà, íî ń íćïîçíàò òèï. Ìîëÿ èçáćđćòć íÿêîÿ PCI êàđòà "
-"îò ńëćäâàùèÿò ćêđàí."
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Êîÿ îò ńëćäíèòć ISDN êàđòàòè ć âàűàòà ?"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "ISDN Configuration"
-msgstr "Íàńòđîéêà íà IDSN"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Abort"
-msgstr "Îòêàç"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Continue"
-msgstr "Íàòàòúê"
-
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
-"Àêî èìàòć ISA êàđòà, ńòîéíîńòèòć íà ńëćäâàùèÿ ćêđàí òđÿáâà äà ńà âćđíè.\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
"\n"
-"Àêî èìàòć PCMCIA êàđòà, ùć òđÿáâà äà çíàćòć IRC è IO íà êàđòàòà ńè.\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "I don't know"
-msgstr "Íć çíàì"
+msgid "Users"
+msgstr "Ïîòđćáèòćëè"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "PCI"
-msgstr "PCI"
+msgid "Aruba"
+msgstr "Àđóáà"
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "Preparing bootloader..."
+msgstr "Ïîäăîòîâêà íà bootloader"
-#: ../../network/isdn.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "What kind of card do you have?"
-msgstr "Êàêúâ òèï êàđòà èìàòć ?"
+msgid "Gateway (e.g. %s)"
+msgstr "Gateway (íàïđ. %s)"
-#: ../../network/isdn.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr "Íàìćđćí ć \"%s\" èíòćđôćéń. Èńêàòć ëè äà ăî èçïîëçâàòć?"
+msgid "The passwords do not match"
+msgstr "Ïàđîëèòć íć ńúâïàäàò"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Êàêúâ ïđîòîêîë æćëàćòć äà ïđîìćíèòć ?"
+msgid "Examples for correct IPs:\n"
+msgstr "Ïđèìćđè íà ïđàâèëíè IP:\n"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Ïđîòîêîë çà îńòàíàëèÿ ńâÿò"
+msgid "Frequency (MHz)"
+msgstr "Śćńòîđòà (MHz)"
-#: ../../network/isdn.pm:1
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
msgstr ""
-"Ïđîòîêîë çà îńòàíàëèÿ ńâÿò\n"
-" áćç D-Êàíàë (íàćòà ëèíèÿ)"
+"Çà äà èçïîëçâàòć çàïàçćí èçáîđ íà ïàêćòè, ńòàđòèđàéòć èíńòàëàöèÿòà ń ``linux "
+"defcfg=floppy''"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "European protocol"
-msgstr "Ćâđîïćéńêè ïđîòîêîë"
+msgid "the number of the processor"
+msgstr "íîìćđúò íà ïđîöćńîđà"
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Ïđîòîêîë Ćâđîïà (EDSS1)"
+msgid "Hardware clock set to GMT"
+msgstr "Őàäđóćđíèÿò âè śàńîâíèê ć íàńòđîćí ïî GMT"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
-msgstr ""
-"Ïîńîśćòć äîńòàâśèêà ńè.\n"
-" Àêî íć ć â ńïèńúêà, èçáćđćòć Unlisted"
+msgid "Give a file name"
+msgstr "Äàéòć èìć íà ôàéë"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "External ISDN modem"
-msgstr "Âúíűćí ISDN ìîäćì"
+msgid "Please choose the port that your printer is connected to."
+msgstr "Ìîëÿ, èçáćđćòć ïîđò êúì êîéòî ńâúđçàí ïđèíòćđà âè."
-#: ../../network/isdn.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "Internal ISDN card"
-msgstr "Âúòđćűíà ISDN êàđòà"
+msgid "Change Cd-Rom"
+msgstr "Ńìÿíà íà CD-ROM"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "Êàêúâ ć òèïúò íà ISDN âđúçêàòà ?"
+msgid "Paraguay"
+msgstr "Ïàđàăâàé"
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
+msgstr ""
+"Èçïîëçâà èíêđćìćíòàëíî ńúçäàâàíć íà đćçćđâíî êîïèć ( íć çàìćíà ńòàđèòć)"
+
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Network Configuration Wizard"
-msgstr "Ìàăüîńíèê çà íàńòđîéêà íà ìđćæàòà"
+msgid "There's no known driver for your sound card (%s)"
+msgstr "Íÿìà äđàéâćđ çà âàűàòà çâóêîâà êàđòà (%s)"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "Ńòàđà íàńòđîéêà (isdn4net)"
+msgid "force"
+msgstr "ïđèíóäèòćëíî"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "New configuration (isdn-light)"
-msgstr "Íîâà íàńòđîéêà (isdn-light)"
+msgid "Exit"
+msgstr "Èçëćç"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
msgstr ""
-"Êîÿ ISDN íàńòđîéêà ïđćäïîśèòàòć ?\n"
-"\n"
-"* Ńòàđàòà íàńòđîéêà èçïîëçâà isdn4net. Ńúäúđæà ìîùíè èíńòđóìćíòè\n"
-" íî ć êàïđèçíà çà íàńòđîéêà è íć ć ńòàíäàđòíà.\n"
-"\n"
-"* Íîâàòà íàńòđîéêà ć ïî-ëćńíà çà đàçáèđàíć, ïî ńòàíäàđòíà,\n"
-" íî ń ïî-ìàëêî èíńòđóìćíòè.\n"
-"\n"
-"Ïđćïîđúśâàìć âè îëćêîòćíàòà íàńòđîéêà.\n"
-
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Do nothing"
-msgstr "Íć ïđàâè íèùî"
-
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Install rpm"
-msgstr "Èíńòàëèđà rpm"
+"ÇÀÁĆËĆÆÊÀ: Â çàâèńèìîńò îò ìîäćëà ïđèíòćđ è ïćśàòàùàòà ńèńòćìà äî %d MB "
+"äîïúëíèòćëíî ńîôòóćđ ùć áúäć èíńòàëèđàí."
-#: ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
msgstr ""
+"Íÿìàòć íàńòđîćí èíòćđôćéń.\n"
+"Íàńòđîéòć ăè ïđćäè òîâà, êàòî öúêíćòć íà 'Íàńòđîéêà'"
-#: ../../network/modem.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Title"
-msgstr "Çàăëàâèć"
+msgid "Estonian"
+msgstr "Ćńòîíńêà"
-#: ../../network/modem.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""
-"Âàűèÿò ìîäćì íć ńć ïîääúđæà îò ńèńòćìàòà.\n"
-"Ïîăëćäíćòć â http://www.linmodems.org"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Âòîđè DNS ńúđâúđ (ïî èçáîđ)"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Ïúđâè DNS ńúđâúđ (ïî èçáîđ)"
+"Apache ć World Wide Web (WWW) ńúđâúđ. Òîé ńëóæè äà îáđàáîòâà íà HTML "
+"ôàéëîâć\n"
+"è CGI."
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Domain name"
-msgstr "Èìć íà äîìćéíà"
+msgid "Add/Del Clients"
+msgstr "Äîáàâÿ/Èçòđèâà êëèćíòè"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "CHAP"
-msgstr "CHAP"
+msgid "Choose the network interface"
+msgstr "Èçáćđćòć ìđćæîâ èíòćđôćéń"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Script-based"
-msgstr "Áàçèđàíà íà ńêđèïò"
+msgid "Unknown Model"
+msgstr "Íćèçâćńòćí Ìîäćë"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Terminal-based"
-msgstr "Áàçèđàíà íà òćđìèíàë"
+msgid "CD/DVD burners"
+msgstr "CD/DVD çàïèńâàùî"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid ""
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"Äÿë, êîéòî ńć ńòàđòèđà ïî ïîäđàçáèđàíć\n"
+" (çà MS-DOS boot, íć çà lilo)\n"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Login ID"
-msgstr "Ïîòđćáèòćëńêî èìć"
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "choose image"
+msgstr "Èçáćđćòć ôàéë"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Phone number"
-msgstr "Òćëćôîíćí íîìćđ"
+msgid "Firewalling configuration detected!"
+msgstr "Îòêđèòà ć íàńòđîéêà íà Çàùèòíà Ńòćíà !"
#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Connection name"
msgstr "Èìć íà âđúçêàòà"
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Dialup options"
-msgstr "Îïöèè çà èçáèđàíć ïî òćëćôîí"
-
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Ìîëÿ, èçáćđćòć ńćđèćí ïîđò êúì êîéòî ńâúđçàí ìîäćìúò âè."
-
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "Network Configuration"
-msgstr "Íàńòđîéêà íà ìđćæàòà"
-
-#: ../../network/netconnect.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
+"x coordinate of text box\n"
+"in number of characters"
msgstr ""
-"Ïîÿâè ńć ïđîáëćì ïđè êîíôèăóđàöèÿòà.\n"
-"Ïđîâćđćòć âàűàòà âđúçêà ïđćç net_monitor èëè mcc. Àêî âàűàòà âđúçêà íć "
-"đàáîòè , âèć òđÿáâà äà ïđćêîíôèăóđèđàòć."
+"x êîîđäèíàòè íà òćêńòîâàòà đàìêà\n"
+"â áđîé ńèìâîëè"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Ńëćä êàòî ńòàíć òîâà, ïđćïîđúśâàìć âè äà đćńòàđòèđàòć X\n"
-"ńđćäàòà ńè, çà äà èçáćăíćòć ïđîáëćìè ńúń ńìÿíàòà èìćòî íà őîńòà."
+msgid "Updating package selection"
+msgstr "Îáíîâÿâàíć íà èçáîđà íà ïàêćòè"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Ïîçäđàâëćíèÿ, ìđćæîâàòć è Èíòćđíćò íàńòđîéêàòà ć çàâúđűćíà.\n"
-"\n"
-"Íàńòđîéêèòć ùć áúäàò ïđèëîæćíè êúì ńèńòćìàòà âè.\n"
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "Êúäć èńêàòć äà ìîíòèđàòć loopback-ôàéëà %s ?"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
msgstr ""
-"Èçíèêíà ïđîáëćì ïđè đćńòàđòèđàíćòî íà ìđćæàòà:\n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr "Ìđćæàòà ńć íóæäàć îò ïđćńòàđòèđàíć. Èńêàòć ëè äà ÿ ïđćńòàđòèđàì?"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Network configuration"
-msgstr "Íàńòđîéêà íà ìđćæàòà"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Èńêàòć ëè äà ńòàđòèđàòć âđúçêàòà ńè ïđè çàđćæäàíć ?"
+"Äèńêćòàòà ć óńïćűíî ńúçäàäćíà.\n"
+"Ńćăà ìîæćòć äà ïđćèăđàćòć èíńòàëàöèÿòà."
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Internet connection"
-msgstr "Èíòćđíćò âđúçêà"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the number of buttons the mouse has"
+msgstr "íîìćđúò íà ïđîöćńîđà"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
msgstr ""
-"Íàńòđîèëè ńòć íÿêîëêî íàśèíà çà âđúçêà êúì Èíòćđíćò.\n"
-"Èçáćđćòć òîçè, êîéòî èńêàòć äà èçïîëçâàòć.\n"
-"\n"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Èçáćđćòć âđúçêàòà, êîéòî èńêàòć äà èçïîëçâàòć"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "ethernet card(s) detected"
-msgstr "ethernet êàđòè çàńćśćíè"
+msgid "Replay"
+msgstr "Ïîâòîđè"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LAN connection"
-msgstr "LAN âđúçêà"
+msgid "Backup other files"
+msgstr "Đćçćđâíî êîïèć íà äđóăè ôàéëîâć"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "cable connection detected"
-msgstr "çàńćśćíà ć êàáćëíà âđúçêà"
+msgid "No floppy drive available"
+msgstr "Íÿìà ôëîïè óńòđîéńòâî"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Cable connection"
-msgstr "Êàáćëíà âđúçêà"
+msgid "Backup files are corrupted"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "detected"
-msgstr "çàńćśćíà "
+msgid "TV norm:"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "ADSL connection"
-msgstr "ADSL âđúçêà"
+msgid "Cpuid family"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "detected %s"
-msgstr "çàńćśćíà %s"
+msgid "32 MB"
+msgstr "32 ÌÁ"
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "ISDN connection"
-msgstr "ISDN âđúçêà"
+msgid "Lithuanian AZERTY (new)"
+msgstr "Ëèòâèéńêà AZERTY (íîâà)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Winmodem connection"
-msgstr "Winmodem âđúçêà"
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "detected on port %s"
-msgstr "çàńćśćí íà ïîđò %s"
+msgid ""
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
+msgstr ""
+"Ìàđêèđàëè ńòć ńîôòóćđćí RAID äÿë êàòî root (/).\n"
+"Íÿìà çàđćæäàùà ïđîăđàìà, êîÿòî äà ìîæć äà ńć ńïđàâè ń íćăî áćç /boot äÿë.\n"
+"Òàêà ść äîáàâćòć /boot äÿë"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Normal modem connection"
-msgstr "Îáèêíîâćíà ìîäćìíà âđúçêà"
+msgid "Previous"
+msgstr "Ïđćäèűćí"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Detecting devices..."
-msgstr "Îòêđèâàíć íà óńòđîéńòâà ..."
+msgid "Other OS (MacOS...)"
+msgstr "Äđóăà ÎŃ (MacOS...)"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Expert Mode"
-msgstr "Đàçűèđćíè ôóíêèöèè"
+msgid "To activate the mouse,"
+msgstr "Çà äà àêòèâèđàòć ìèűêàòà ńè,"
-#: ../../network/netconnect.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Use auto detection"
-msgstr "Èçïîëçâàé àâòîìàòèśíî çàńèśàíć"
+msgid "Bringing up the network"
+msgstr "Âêëțśâàì ìđćæàòà"
-#: ../../network/netconnect.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Choose the profile to configure"
-msgstr "Èçáćđćòć ïđîôèë çà íàńòđîéêà"
+msgid "Screenshots will be available after install in %s"
+msgstr "Ńíèìêè ùć áúäàò íàëèśíè ńëćä èíńòàëèđàíć â %s"
-#: ../../network/netconnect.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Welcome to The Network Configuration Wizard.\n"
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Äîáđć äîűëè ïđè ìàăüîńíèêà çà íàńòđîéêà íà ìđćæà\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
"\n"
-"Âèć ńòć íà ïúò äà íàńòđîèòć Èíòćđíćò/ìđćæîâàòà ńè âđúçêà.\n"
-"Àêî íć èńêàòć äà èçïîëçâàòć àâòîìàòèśíî çàńèśàíć, èçêëțśćòć êóòèéêàòà.\n"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Òúé êàòî ïđàâèòć ìđćæîâà èíńòàëàöèÿ, ìđćæàòà âè âćść ć íàńòđîćíà.\n"
-"Öúêíćòć Ok, çà äà çàïàçèòć íàńòđîéêàòà, èëè Îòìÿíà, çà äà ïđćíàńòîèòć "
-"Èíòćđíćò è ìđćæîâàòà ńè âđúçêà.\n"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid ""
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
"\n"
-"We are now going to configure the %s connection.\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
-"Press OK to continue."
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
msgstr ""
+"Áćűć çàńćśćí ïîâćść îò ćäèí Microsoft Windows äÿë\n"
+"íà òâúđäèÿ âè äèńêà. Èçáćđćòć òîçè, śèÿòî äúëæèíà èńêàòć äà ïđîìćíèòć, çà "
+"äà\n"
+"èíńòàëèđàòć Mandrake Linux îïćđàöèîííà ńèńòćìà.\n"
"\n"
"\n"
+"Çà èíôîđìàöèÿ, âńćêè äÿë ć èçáđîćí êàêòî ńëćäâà: \"Linux èìć\", \"Windows èìć"
+"\", \"Êàïàöèòćò\".\n"
"\n"
-"Ńćăà ùć íàńòđîèì %s âđúçêàòà.\n"
+"\"Linux èìćòî\" ńć êîäèđà êàêòî ńëćäâà: \"òèï íà äèńêà\", \"íîìćđ íà äèńêà"
+"\",\n"
+"\"íîìćđ íà äÿë\" (íàïđèìćđ, \"hda1\").\n"
"\n"
-"Íàòèńíćòć OK, çà äà ïđîäúëæèòć."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Ńćăà ùć íàńòđîèì %s âđúçêàòà."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Internet connection & configuration"
-msgstr "Èíòćđíćò âđúçêà è íàńòđîéêà"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Configure the connection"
-msgstr "Êîíôèăóđèđàíć íà âđúçêàòà"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Disconnect"
-msgstr "Îòâúđæè"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Connect"
-msgstr "Ńâúđæè"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid ""
"\n"
-"You can reconfigure your connection."
-msgstr ""
+"\"Òèïúò íà äèńêà\" ìîæć äà ć \"hd\", àêî ć IDE òâúđä äèńê, èëè \"sd\", àêî "
+"ć\n"
+"SCSI òâúđä äèńê.\n"
"\n"
-"Ìîæćòć äà ïđćíàńòđîèòć âđúçêàòà."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid ""
"\n"
-"You can connect to the Internet or reconfigure your connection."
-msgstr ""
+"\"Íîìćđúò íà äèńêà\" âèíàăè ć áóêâàòà ńëćä \"hd\" èëè \"sd\". Ïđè IDE "
+"äèńêîâć:\n"
+"\n"
+" * \"a\" îçíàśàâà \"master äèńê íà ïúđâèÿ IDE êîíòđîëćđ\",\n"
+" * \"b\" îçíàśàâà \"slave äèńê íà ïúđâèÿ IDE êîíòđîëćđ\",\n"
+" * \"c\" îçíàśàâà \"master äèńê íà âòîđèÿ IDE êîíòđîëćđ\",\n"
+" * \"d\" îçíàśàâà \"slave äèńê íà âòîđèÿ IDE êîíòđîëćđ\".\n"
"\n"
-"Ìîæćòć äà ńć ńâúđæćòć êúì Èíòćđíćò èëè äà ïđćíàńòđîèòć âđúçêàòà."
+"\n"
+"Ïđè SCSI óńòđîéńòâà, \"a\" îçíàśàâà \"ïúđâè òâúđä äèńê\", \"b\" îçíàśàâà "
+"\"âòîđè òâúđä äèńê\" è ò.í..\n"
+"\n"
+"\"Windows èìćòî\" ć áóêâàòà íà òâúđäèÿ âè äèńê ïîä Windows (ïúđâèÿò äèńê "
+"èëè\n"
+"äÿë ńć íàđèśà \"C:\")."
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "Â ìîìćíòà íć ńòć ńâúđçàíè êúì Èíòćđíćò"
+msgid "Tanzania"
+msgstr "Òàíçàíèÿ"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Computing FAT filesystem bounds"
+msgstr "Èçśèńëÿâàì ăđàíèöèòć íà fat ôàéëîâàòà ńèńòćìà"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
-"You can disconnect or reconfigure your connection."
+"Backup Sources: \n"
msgstr ""
"\n"
-"Ìîæćòć äà ńć îòâúđæćòć èëè äà ïđćíàńòđîèòć âđúçêàòà."
+"Èçòîśíèê çà đćçćđâíî êîïèć: \n"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "You are currently connected to the Internet."
-msgstr "Â ìîìćíòà ńòć ńâúđçàíè êúì Èíòćđíćò"
+msgid "Content of the file"
+msgstr "Ńúäúđæàíèć íà ôàéëà"
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "URL òđÿáâà äà ć çàïîśâà ń 'ftp:' èëè 'http:'"
+msgid "Authentication LDAP"
+msgstr "LDAP àóòîđèçàöèÿ"
-#: ../../network/network.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Proxy should be http://..."
-msgstr "Proxy-ńúđâúđà òđÿáâà äà ć http://..."
+msgid "Let me pick any driver"
+msgstr "Íćêà èçáćđà äđàéâćđ"
-#: ../../network/network.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "FTP proxy"
-msgstr "FTP proxy"
+msgid "Profile "
+msgstr "Ïđîôèë "
-#: ../../network/network.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
+msgid "transmitted"
+msgstr "ïđćőâúđëćíè"
-#: ../../network/network.pm:1
-#, c-format
-msgid "Proxies configuration"
-msgstr "Íàńòđîéêà íà proxy"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Palestine"
+msgstr "Çàïàçè èçáîđ íà ïàêćòè"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "Gateway àäđćńà òđÿáâà äà áúäć âúâ ôîđìàò 1.2.3.4"
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
-#: ../../network/network.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "DNS ńúđâúđà òđÿáâà äà áúäć âúâ ôîđìàò 1.2.3.4"
+msgid "%d comma separated strings"
+msgstr "%d ńúń çàïćòàÿ đàçäćëćí íèç"
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Gateway device"
-msgstr "Gateway óńòđîéńòâî"
+msgid "Here is the full list of keyboards available"
+msgstr "Ćòî ïúëćí ńïèńúê íà äîńòđúïíèòć êëàâèàòóđè"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (íàïđ. %s)"
+msgid "Theme name"
+msgstr "Èìć íà òćìà"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "DNS server"
-msgstr "DNS ńúđâúđ"
+msgid "/_Help"
+msgstr "/_Ïîìîù"
-#: ../../network/network.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
msgstr ""
-"Ìîëÿ, âúâćäćòć host name çà ìàűèíàòà.\n"
-"Host èìćòî òđÿáâà äà áóäć íàïúëíî êâàëèôèöèđàíî èìć,\n"
-"êàòî ``mybox.mylab.myco.com''.\n"
-"Ìîæćòć ńúùî äà âúâćäćòć IP àäđćńà íà Âàűèÿ gateway, àêî èìàòć òàêúâ"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
+msgid "the width of the progress bar"
+msgstr "űèđèíàòà íà ëćíòàòà çà ïđîăđćń"
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
-msgstr ""
+msgid "Cook Islands"
+msgstr "Îńòđîâè Êóê"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP àäđćńúò òđÿáâà äà áúäć âúâ ôîđìàò 1.2.3.4"
+msgid "Formatting partition %s"
+msgstr "Ôîđìàòèđàíć íà äÿë %s"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Start at boot"
-msgstr "Èçïúëíćíèć ïđè ńòàđòèđàíć"
-
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Ìîëÿ, ïđîáâàéòć ìèűêàòà ńè"
+msgid "Hostname required"
+msgstr "Èçèńêâà èìć íà ìàűèíà"
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Network Hotplugging"
-msgstr "Íàńòđîéêà íà ìđćæàòà"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Unselect fonts installed"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "Ïđîńëćäÿâàíć íà ID íà ìđćæîâàòà êàđòà (ïîëćçíî ïđè ëàïòîïè)"
+msgid "Cancel"
+msgstr "Îòêàç"
-#: ../../network/network.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "DHCP host name"
-msgstr "Èìć íà őîńò:"
+msgid "Searching for configured scanners ..."
+msgstr "Ëîêàëćí ïđèíòćđ"
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Netmask"
-msgstr "Ìđćæîâà ìàńêà"
+msgid "Wheel"
+msgstr "Wheel"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "IP address"
-msgstr "IP àäđćń"
+msgid "Videocard"
+msgstr "Âèäćî êàđòà"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp/zeroconf)"
+msgid "\tBackups use tar and bzip2\n"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "Automatic IP"
-msgstr "Àâòîìàòèśćí IP àäđćń"
+msgid "Remove Selected"
+msgstr "Èçòđèâàíć íà îèçáđàíèòć"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " (driver %s)"
-msgstr " (äđàéâćđ %s)"
+msgid "/Autodetect _modems"
+msgstr "/Àâòîìàòèśíî îòêđèâà _ìîäćìè"
-#: ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configuring network device %s"
-msgstr "Íàńòđîéêà íà ìđćæîâîòî óńòđîéńòâî %s"
+msgid "Remove printer"
+msgstr "Ïđćìàőâàíć íà ïđèíòćđà"
-#: ../../network/network.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
msgstr ""
-"Ìîëÿ, âúâćäćòć IP íàńòđîéêèòć çà òàçè ìàűèíà.\n"
-"Âńÿêî óńòđîéńòâî òđÿáâà äà áúäć âúâćäćíî êàòî IP àäđćń\n"
-"ń òîśêîâî-äćńćòèśíî îçíàśćíèć (íàïđèìćđ, 1.2.3.4)."
+"ÂÍÈÌÀÍÈĆ!\n"
+"\n"
+"DrakX òđÿáâà äà ïđćđàçäćëè Âàűèÿ Windows äÿë. Áúäćòć âíèìàòćëíè: òàçè "
+"îïćđàöèÿ ć\n"
+"îïàńíà. Àêî îùć íć ńòć ăî íàïđàâèëè, òđÿáâà ïúđâî äà ïóńíćòć scandisk (è\n"
+"ćâćíòóàëíî äà èçïîëçâàòć defrag) ïîä Windows âúđőó òîçè äÿë, òîăàâà \n"
+"ïîâòîđćòć èíńòàëàöèàÿòà. Áè áèëî äîáđć äà íàïđàâèòć àđőèâ íà äàííèòć ńè.\n"
+"Êîăàòî ńòć ńèăóđíè, íàòèńíćòć ÎÊ."
-#: ../../network/network.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
+msgid "Which services would you like to allow the Internet to connect to?"
msgstr ""
-"ÂÍÈÌÀÍÈĆ: Òîâà óńòđîéńòâî âćść ć íàńòđîćíî äà ńć ńâúđçâà êúì Èíòćđíćò.\n"
-"Ïđîńòî ïđèćìćòć, çà äà îńòàâèòć óńòđîéńòâîòî íàńòđîćíî.\n"
-"Ïîïđàâêàòà íà ïîëćòàòà ïî-äîëó ùć ïđćçàïèűć òàçè íàńòđîéêà."
-#: ../../network/shorewall.pm:1
-#, c-format
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
msgstr ""
-"Âíèìàíèć ! Îòêđèòà ć íàńòđîéêà íà Çàùèòíà Ńòćíà. Ìîæć äà ńć íàëîæè íÿêàêâà "
-"đúśíà ïîïđàâêà ńëćä èíńòàëàöèÿòà."
+"Äîáđć äîűëè â íàńòđîéêàòà íà Proxy.\n"
+"\n"
+"Òóê ùć ìîæćòć äà óńòàíîâèòć âàűèòć HTTP è FTP proxy\n"
+"ńúń èëè áćç ïîòđćáèòćëńêî èìć è ïàđîëà\n"
-#: ../../network/shorewall.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Îòêđèòà ć íàńòđîéêà íà Çàùèòíà Ńòćíà !"
+msgid "Other"
+msgstr "Äđóăà"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
-msgid "Account Password"
-msgstr "Ïàđîëà íà àêàóíòà"
+msgid "Default"
+msgstr "Ïî ïîäđàçáèđàíć"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Account Login (user name)"
-msgstr "Èìć íà àêàóíòà (ïîòćáèòćëńêî èìć)"
+msgid "Button 2 Emulation"
+msgstr "Èìèòàöèÿ íà 2 áóòîíà"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Timeout íà âđúçêàòà (â ńćê)"
+msgid "type1inst building"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Connection speed"
-msgstr "Ńêîđîńò íà âđúçêàòà"
+msgid "Abiword"
+msgstr "Abiword"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "choose image file"
+msgstr "Èçáćđćòć ôàéë"
+
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Dialing mode"
-msgstr "Đćæèì íà íàáèđàíć"
+msgid "X server"
+msgstr "X ńúđâúđ"
-#: ../../network/tools.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Choose your country"
-msgstr "Èçáćđćòć ńòđàíàòà ńè"
+msgid "Domain Admin User Name"
+msgstr "Èìć íà àäìèíèńòđàòîđ íà äîìćéí"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "2-đè DNS íà äîńòàâśèêà (ïî æćëàíèć)"
+msgid "There was an error while scanning for TV channels"
+msgstr "Ïîÿâè ńć ăđćűêà ïđè ńêàíèđàíć çà TV êàíàëè"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "1-âè DNS íà äîńòàâśèêà (ïî æćëàíèć)"
+msgid "US keyboard (international)"
+msgstr "US êëàâèàòóđà (ìćæäóíàđîäíà)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Provider phone number"
-msgstr "Òćëćôîíćí íîìćđ íà äîńòàâśèêà"
+msgid "Not installed"
+msgstr "Íć ć èíńòàëèđàí"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Èìć íà äîńòàâśèêà (íàïđ. provider.net)"
+msgid "LAN connection"
+msgstr "LAN âđúçêà"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Your personal phone number"
-msgstr "Ëèśíèÿ âè òćëćôîíćí íîìćđ"
+msgid "/File/-"
+msgstr "/Ôàéë/-"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Card IO_1"
-msgstr "IO_1 íà êàđòàòà"
+msgid "Italian"
+msgstr "Èòàëèàíńêà"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
-msgid "Card IO_0"
-msgstr "IO_0 íà êàđòàòà"
+msgid "Basic"
+msgstr "Áàçîâ"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Card IO"
-msgstr "IO íà êàđòàòà"
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
+msgstr ""
+"\n"
+" Àâòîđńêè ïđàâà (C) 2002 îò MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Card mem (DMA)"
-msgstr "Ïàìćò (DMA) íà êàđòàòà"
+msgid "Honduras"
+msgstr "Őîíäóđàń"
+
+#: ../../help.pm:1
+#, c-format
+msgid "pdq"
+msgstr ""
#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Card IRQ"
-msgstr "IRQ íà êàđòàòà"
+msgid "Card IO"
+msgstr "IO íà êàđòàòà"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Please fill or check the field below"
-msgstr "Ìîëÿ, ïîïúëíćòć èëè ïđîâćđćòć ïîëćòî ïî-äîëó"
+msgid "when checked, owner and group won't be changed"
+msgstr "ïđè ïđîâćđêà, ńîáńòâćíèêà è ăđóïàòà íÿìà äà áúäàò ïđîìćíćíè"
-#: ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Connection Configuration"
-msgstr "Íàńòđîéêà íà âđúçêàòà"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
+msgstr ""
+"\n"
+"Òàçè ńïćöèàëíà ńòàđòèđàùà\n"
+"èâèöà íà äÿëà ć çà äâîéíî\n"
+"ńòàđòèđàíć íà ńèńòćìàòà âè.\n"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
msgstr ""
-"Ńèńòćìàòà íć èçăëćæäà ńâúđçàíà êúì Èíòćđíćò.\n"
-"Îïèòàéòć ńć äà ïđćíàńòđîèòć âđúçêàòà."
+"Ìîëÿ, èçáćđćòć çà âńÿêà ńòúïêà, äàëè ùć ńć ïđćèăđàć êàòî ïđè èíńòàëàöèÿòà, "
+"èëè ùć áúäć đúśíà"
-#: ../../network/tools.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Çà âàűà ńèăóđíîńò, ńćăà òÿ ùć áúäćòć îòâúđçàíà."
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
+msgstr ""
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Ńèńòćìàòà â ìîìćíòà ć ńâúđçàíà êúì Èíòćđíćò."
+msgid "\t-Network by FTP.\n"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Testing your connection..."
-msgstr "Èçïđîáâàíć íà âđúçêàòà..."
+msgid "Russian (Yawerty)"
+msgstr "Đóńêà (Yawerty)"
-#: ../../network/tools.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Èńêàòć ëè ńćăà äà îïèòàòć âđúçêà êúì Èíòćđíćò ?"
+msgid "You must enter a device or file name!"
+msgstr "Âèć òđÿáâà äà âúâćäćòć óńòđîéńòâî èëè èìć íà ôàéë!"
-#: ../../network/tools.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Internet configuration"
-msgstr "Íàńòđîéêà íà Èíòćđíćò"
+msgid "/_Quit"
+msgstr "/_Èçëèçà"
-#: ../../partition_table/raw.pm:1
+#: ../../network/adsl.pm:1
#, c-format
msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
msgstr ""
-"Íćùî ëîűî ńòàâà ń óńòđîéńòâîòî âè.\n"
-"Òćńòà çà öćëîńò íà äàííèòć ïđîïàäíà.\n"
-"Òîâà çíàśè, ść ïèńàíćòî íà êàêâîòî è áèëî ïî äèńêà ùć ïđćâđúùà\n"
-"ïđîèçâîëíî â áîêëóê"
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid " (Default)"
-msgstr " (Ïî ïîäđàçáèđàíć)"
+msgid "Graphics memory: %s kB\n"
+msgstr "Ăđàôèśíà ïàìćò: %s kB\n"
-#: ../../printer/cups.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Íà CUPS ńúđâúđ \"%s\""
+msgid ""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+msgstr ""
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Remote Printers"
-msgstr "Îòäàëćśćí ïđèíòćđ"
+msgid "access to compilation tools"
+msgstr "äîńòúï äî èíńòđóìćíòè çà êîìïèëàöèÿ"
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "CUPS"
-msgstr "CUPS"
+msgid "Please select data to restore..."
+msgstr "Ìîëÿ, èçáćđćòć äàííè çà âúçńòàíîâÿâàíć..."
-#: ../../printer/cups.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "(on this machine)"
-msgstr "(íà òàçè ìàűèíà)"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
+msgstr ""
+"Àêî ńìÿòàòć äà èçïîëçâàòć aboot, îńòàâćòć ńâîáîäíî ïđîńòđàíńòâî (2048 "
+"ńćêòîđà\n"
+"ńà äîńòàòúśíè) â íàśàëîòî íà äèńêà"
-#: ../../printer/cups.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "(on %s)"
-msgstr "(íà %s)"
+msgid "Standard test page"
+msgstr "Ńòàíäàđòíà òćńòîâà ńòđàíèöà"
-#: ../../printer/data.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Îáùà Unix Ïđèíòćđíà Ńèńòćìà"
+msgid "Create"
+msgstr "Ńúçäàé"
-#: ../../printer/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LPRng"
-msgstr "LPRng"
+msgid "What"
+msgstr "Êàêâî"
-#: ../../printer/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR Íîâî ïîêîëćíèć"
+msgid "There was an error ordering packages:"
+msgstr "Ïîÿâè ńć ăđćűêà ïđè ïîđúśâàíćòî íà ïàêćòèòć:"
-#: ../../printer/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "LPD"
-msgstr "LPD"
+msgid "Bulgarian (BDS)"
+msgstr "Áúëăàđńêà (BDS)"
-#: ../../printer/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Ëèíććí Ïđèíòćđćí Äćìîí"
+msgid "Disable Server"
+msgstr "Èçêëțśâà Ńúđâúđ"
-#: ../../printer/data.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "PDQ"
-msgstr "PDQ"
+msgid "Filesystem encryption key"
+msgstr "Êđèïòèđàù êëțś çà ôàéëîâà ńèńòćìà"
-#: ../../printer/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Ïćśàòàé, Áćç Îïàűêà"
+msgid "Gujarati"
+msgstr "Ăóàäæàđàòè"
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Unknown Model"
-msgstr "Íćèçâćńòćí Ìîäćë"
+msgid ""
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
+msgstr ""
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Unknown model"
-msgstr "Íćèçâćńòćí ìîäćë"
+msgid "Save theme"
+msgstr "Çàïàçâà òćìà"
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "%s (Port %s)"
-msgstr "Ïîđò"
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "group"
+msgstr "ăđóïà"
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Host %s"
-msgstr "Őîńò %s"
+msgid "Brazil"
+msgstr "Áđàçèëèÿ"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Network %s"
-msgstr "Ìđćæà %s"
+msgid "Auto Install"
+msgstr "Àâòîìàòèśíî Èíńòàëèđà"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "Interface \"%s\""
-msgstr "Èíòćđôćéń \"%s\""
+msgid "Network Configuration Wizard"
+msgstr "Ìàăüîńíèê çà íàńòđîéêà íà ìđćæàòà"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Local network(s)"
-msgstr "Ëîêàëíà ìđćæà(è)"
+msgid "Removable media automounting"
+msgstr "Àâòîìàòèśíî ìîíòèđàíć íà ńìćíÿćì íîńèòćë"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Raw printer (No driver)"
-msgstr "'Raw' ïđèíòćđ (Áćç äđàéâćđ)"
+msgid "Printing"
+msgstr "Ïćśàòàíć"
-#: ../../printer/main.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ", using command %s"
-msgstr ", èçïîëçâà êîìàíäà %s"
+msgid "Unkown driver"
+msgstr "Íćèçâćńòćí äđàéâćđ"
-#: ../../printer/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr " íà Novell ńúđâúđ \"%s\", ïđèíòćđ \"%s\""
+msgid ""
+"There are no printers found which are directly connected to your machine"
+msgstr "Íÿìà íàìćđćíè ïđèíòćđè âêëțśćíè äèđćêòíî êúì ìàűèíàòà âè"
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr " íà SMB/Windows ńúđâúđ \"%s\", ïîäćëćí \"%s\""
+msgid "Create a new partition"
+msgstr "Ńúçäàé íîâ äÿë"
-#: ../../printer/main.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP őîńò \"%s\", ïîđò %s"
+msgid "Driver:"
+msgstr "Äđàéâćđ: "
-#: ../../printer/main.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "unknown"
+msgstr "Íćèçâćńòćí ìîäćë"
+
+#: ../../install_interactive.pm:1
#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr " íà LPD ńúđâúđ \"%s\", ïđèíòćđ \"%s\""
+msgid "Use fdisk"
+msgstr "Èçïîëçâàé fdisk"
-#: ../../printer/main.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ", printing to %s"
-msgstr ", ïćśàò íà %s"
+msgid "MOVE YOUR WHEEL!"
+msgstr "ÁÓÒÍĆÒĆ ÒÎÏŚĆÒÎ !"
-#: ../../printer/main.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ", multi-function device"
-msgstr ", ìíîăîôóíêöèîíàëíî óńòđîéńòâî"
+msgid "sent: "
+msgstr "èçïđàùà: "
-#: ../../printer/main.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", ìíîăîôóíêöèîíàëíî óńòđîéńòâî íà HP JetDirect"
+msgid "Automatic IP"
+msgstr "Àâòîìàòèśćí IP àäđćń"
-#: ../../printer/main.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+" Note that two different options are available after clicking the button:\n"
+"\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
+msgstr ""
+"À òàêà ! Èíńòàëàöèÿòà ć çàâúđűćíà è GNU/Linux ńèńòćìàòà âè ć ăîòîâà çà\n"
+"óïîòđćáà. Ïđîńòî öúêíćòć \"OK\", çà äà đćńòàđòèđàòć ńèńòćìàòà. Ìîæćòć äà\n"
+"ńòàđòèđàòć GNU/Linux èëè Windows, êîćòî ïđćäïîśèòàòć (àêî èìàòć äâć "
+"ńèńòćìè),\n"
+"âćäíàăà ńëćä êàòî êîìïțòúđúò ńòàđòèđà îòíîâî.\n"
+"\n"
+"Áóòîíà \"Íàïđćäíèśàâ\" (ńàìî â \"Ćêńïćđòćí\") ïîêàçâà îùć äâà áóòîíà çà:\n"
+"\n"
+" * \"ăćíćđèđàíć íà äèńêćòà çà àâòîìàòèśíà èíńòàëàöèÿ\": çà äà ńúçäàäćòć\n"
+"èíńòàëàöèîííà äèńêćòà, êîÿòî ńëćä òîâà àâòîìàòèśíî äà èçśúđűâà öÿëàòà\n"
+"èíńòàëàöèÿ áćç ïîìîùòà íà îïćđàòîđ, ïđèëèśàùà íà èíńòàëàöèÿòà, êîÿòî òîêó-"
+"ùî\n"
+"ńòć èçâúđűèëè.\n"
+"\n"
+" Îòáćëćæćòć, ść äâć đàçëèśíè îïöèè ńà äîńòúíè, śđćç öúêàíć íà áóòîíà:\n"
+"\n"
+" * \"Ïđćèăđàé\". Òîâà ć śàńòèśíî àâòîìàòèçèđàíà èíńòàëàöèÿ êàòî ńòúïêèòć\n"
+"ïî đàçäćëÿíć íà äÿëîâć îńòàâàò èíòćđàêòèâíè.\n"
+"\n"
+" * \"Àâòîìàòèśíà\". Íàïúëíî àâòîìàòèśíà èíńòàëàöèÿ: òâúđäèÿò äèńê ńć\n"
+"ïđćçàïèńâà íàïúëíî, âńÿêàêâè äàííè ńć çàăóáâàò.\n"
+"\n"
+" Òàçè îńîáćíîńò ć ìíîăî óäîáíà, êîăàòî èíńòàëèđàòć ăîëÿì áđîé ïîäîáíî\n"
+"ìàűèíè. Âèæòć ńćêöèÿòà çà àâòîìàòèśíà èíńòàëàöèÿ íà íàűèÿ web-ńàéò.\n"
+"\n"
+" * \"Çàïàçè èçáîđà íà ïàêćòè\"(*): çàïàçâà èçáîđà íà ïàêćòè, òàêà êàêòî "
+"ć\n"
+"íàïđàâćí ïđćäè. Êîăàòî ïđàâèòć äđóăà èíńòàëàöèÿ, âêàđàéòć äèńêćòàòà â\n"
+"óńòđîéńòâîòî è ïóńíćòć èíńòàëàöèÿòà äà âúđâè śđćç ïîìîùíèÿ ćêđàí, êàòî\n"
+"íàòèńíćòć êëàâèűà [F1] è êàòî íàïèűćòć >>linux defcfg=\"floppy\"<<.\n"
+"\n"
+"(*) Òđÿáâà âè FAT-ôîđìàòèđàíà äèńêćòà (çà äà ńúçäàäćòć òàêâà ïîä GNU/Linux,\n"
+"íàïèűćòć \"mformat a:\")"
+
+#: ../../mouse.pm:1
#, c-format
-msgid ", multi-function device on USB"
-msgstr ", ìíîăîôóíêöèîíàëíî óńòđîéńòâî íà USB"
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington THinking Mouse"
-#: ../../printer/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ", multi-function device on parallel port \\#%s"
-msgstr ", ìíîăîôóíêöèîíàëíî óńòđîéńòâî íà íà ïàđàëćëćí ïîđò \\#%s"
+msgid "Configuration of a remote printer"
+msgstr "Íàńòđîéêà íà îòäàëćśćí ïđèíòćđ"
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ", USB printer"
-msgstr ", USB ïđèíòćđ"
+msgid "Moldova"
+msgstr "Ìîëäîâà"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ", USB printer \\#%s"
-msgstr ", USB ïđèíòćđ \\#%s"
+msgid "Please check if you want to erase your tape before the backup."
+msgstr ""
+"Ìîëÿ, ïđîâćđćòć äàëè èńêòć äà èçòđèćòć ëćíòàòà ïđćäè äà ïđàâèòć đćçćđâíî "
+"êîïèć."
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid " on parallel port \\#%s"
-msgstr " íà ïàđàëćëćí ïîđò \\#%s"
+msgid "An online platform to respond to enterprise support needs."
+msgstr ""
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Local Printers"
-msgstr "Ëîêàëíè ïđèíòćđè"
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "URL òđÿáâà äà ć çàïîśâà ń 'ftp:' èëè 'http:'"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Pipe job into a command"
-msgstr "Ïđćêàđàé çàäàíèćòî ïđćç êîìàíäà"
+msgid "Add a new rule at the end"
+msgstr "Äîáàâÿ íîâî ïđàâèëî íà êđàÿ"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Enter a printer device URI"
-msgstr "Âúâćäćòć URI íà ïćśàòàùî óńòđîéńòâî"
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
+msgstr ""
+"Âèć ńúùî đćűàâàòć, äàëè ïđèíòćđèòć íà îòäàëćśćíèòć ìàűèíè ùć áúäàò "
+"àâòîìàòèśíî äîńòúïíè íà òàçè ìàűèíà."
-#: ../../printer/main.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Printer on NetWare server"
-msgstr "Ïđèíòćđ íà NetWare ńúđâúđ"
+msgid ""
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
+msgstr ""
+"Ńćăà ìîæćòć äà ïîäàäćòć îïöèèòć ìó äî ìîäóëà %s.\n"
+"Îïöèèòć ńà âúâ ôîđìàò ``èìć=ńòîéíîńò èìć2=ńòîéíîńò2 ...''.\n"
+"Íàïđèìćđ: ``io=0x300 irq=7''"
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Ïđèíòćđ íà SMB/Windows 95/98/NT ńúđâúđ"
+msgid "Quit without writing the partition table?"
+msgstr "Èçőîä, áćç äà çàïèń íà òàáëèöàòà íà äÿëîâćòć ?"
-#: ../../printer/main.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Ìđćæîâ ïđèíòćđ (TCP/Socket)"
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Printer on remote lpd server"
-msgstr "Ïđèíòćđ íà îòäàëćśćí LPD ńúđâúđ"
+msgid "Installing packages..."
+msgstr "Èíńòàëèđàíć íà ïàêćòè ..."
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Ïđèíòćđ íà îòäàëćśćí CUPS ńúđâúđ"
+msgid "Dutch"
+msgstr "Őîëàíäńêà"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Remote printer"
-msgstr "Îòäàëćśćí ïđèíòćđ"
+msgid "The following packages need to be installed:\n"
+msgstr "Ńëćäíèòć ïàêćòè ùć òđÿáâà äà ńć èíńòàëèđàò:\n"
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Local printer"
-msgstr "Ëîêàëćí ïđèíòćđ"
+msgid "Angola"
+msgstr "Àíăîëà"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Configuring applications..."
-msgstr "Íàńòđîéêà íà ïđèëîæćíèÿ..."
+msgid "service setting"
+msgstr "óńòàíîâÿâàíć íà îáńëóæâàíèÿ"
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
+msgid "Custom"
+msgstr "Êëèćíòńêà"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Èçòđèâàíć íà ïđèíòćđ \"%s\"..."
+msgid "File is already used by another loopback, choose another one"
+msgstr "Ôàéëúò âćść ńć èçïîëçâà òî äđóă loopback, èçáćđćòć äđóă ôàéë."
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Íàèńòèíà ëè èńêàòć äà ïđćìàőíćòć ïđèíòćđà \"%s\" ?"
+msgid "Read-only"
+msgstr "Ńàìî çà śćòćíć"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remove printer"
-msgstr "Ïđćìàőâàíć íà ïđèíòćđà"
+msgid "Latvia"
+msgstr "Ëàòâèÿ"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Learn how to use this printer"
-msgstr "Íàóśćòć êàê äà èçïîçëâàòć òîçè ïđèíòćđ"
+msgid "No known driver"
+msgstr "Íÿìà èçâćńòćí äđàéâćđ"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Print test pages"
-msgstr "Îòïćśàòâàíć íà òćńòîâè ńòđàíèöè"
+msgid "1 MB"
+msgstr "1 ÌÁ"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
msgstr ""
-"Íćńïćűíî ïđćìàőâàíć íà ïđèíòćđ \"%s\" îò Star Office/OpenOffice.org/GIMP."
+"Àêî òîé íć ć òîçè êîéòî èńêàòć äà êîíôèăóđèđàòć, âúâćäćòć èìć íà óńòđîéńòâî/"
+"èìć íà ôàéë âúâ âőîäíîòî ïîëć"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksound:1
#, c-format
msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
-msgstr "Ïđèíòćđúò \"%s\" áćűć óńïćűíî ïđćìàőíàò îò ffice/OpenOffice.org/GIMP."
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Ïđćìàőâàì ïđèíòćđ îò Star Office/OpenOffice.org/GIMP"
+msgid "Configure Local Area Network..."
+msgstr "Íàńòîéêà íà ëîêàëíà ìđćæà ..."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Ïđćìàőâà òîçè ïđèíòćđ îò Star Office/OpenOffice.org/GIMP"
+msgid "Launch the sound system on your machine"
+msgstr "Ïóńíêàíć çâóêîâàòà ńèńòćìà íà ìàűèíàòà âè"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-"Íćóńïćő ïđè äîáàâÿíć íà ïđèíòćđ \"%s\" íà Star Office/OpenOffice.org/GIMP."
+msgid "Preparing printer database..."
+msgstr "Ïîäăîòâÿíć íà áàçàòà äàííè îò ïđèíòćđè ..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-"Ïđèíòćđúò \"%s\" ć áèë óńïćűíî äîáàâćí êúì Star Office/OpenOffice.org/GIMP."
+msgid "Information"
+msgstr "Èíôîđìàöèÿ"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Äîáàâÿíć íà ïđèíòćđ íà Star Office/OpenOffice.org/GIMP"
+msgid "No network card"
+msgstr "Íÿìà îòêđèòà ìđćæîâà êàđòà"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Äîáàâÿ òîçè ïđèíòćđ íà Star Office/OpenOffice.org/GIMP"
+msgid "Which filesystem do you want?"
+msgstr "Êîÿ ôàéëîâà ńèńòćìà èńêàòć ?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Ïđèíòćđúò \"%s\" âćść ć îïđćäćëćí çà ïîëçâàíć ïî ïîäđàçáèđàíć."
+msgid "3 buttons"
+msgstr "3 áóòîíà"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Default printer"
-msgstr "Ïđèíòćđ ïî ïîäđàçáèđàíć"
+msgid "Detailed information"
+msgstr "Ïîäđîáíà èíôîđìàöèÿ"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Set this printer as the default"
-msgstr "Îïđćäćëè òîçè ïđèíòćđ çà ïîëçâàíć ïî ïîäđàçáèđàíć"
+msgid "Malta"
+msgstr "Ìàëòà"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer options"
-msgstr "Îïöèè íà ïđèíòćđà"
+msgid ""
+"Printer default settings\n"
+"\n"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
+msgstr ""
+"Íàńòđîéêè íà ïđèíòćđà ïî ïîäđàçáèđàíć\n"
+"\n"
+"Òđÿáâà äà ńòć ńèăóđíè, ść ăîëćìèíàòà íà ńòđàíèöàòà\n"
+"è òèïà íà ìàńòèëîòî (àêî èìà) ńà íàńòđîćíè ïđàâèëíî.\n"
+"Îòáćëćæćòć, ść ïđè ìíîăî âèńîêî êàśćńòî íà èçőîäà íà\n"
+"ïđèíòćđà, òîé ìîæć çíàśèòćëíî äà ńć çàáàâè."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Printer manufacturer, model"
-msgstr "Ïđîèçâîäèòćë íà ïđèíòćđà, ìîäćë"
+msgid "This floppy is not FAT formatted"
+msgstr "Òàçè äèńêćòà íć ć ôîđìàòèđàíà íà FAT"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "Ïđîèçâîäèòćë íà ïđèíòćđà, ìîäćë, äđàéâćđ"
+msgid "Configuring network"
+msgstr "Íàńòîéêà íà ìđćæàòà"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Èçòđèâàíć íà ńòàđ ïđèíòćđ \"%s\"..."
+msgid "Graphic Card"
+msgstr "Ăđàôèśíà êàđòà"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Printer name, description, location"
-msgstr "Èìć íà ïđèíòćđà, îïèńàíèć, ìćńòîïîëîæćíèć"
+msgid "Resizing Windows partition"
+msgstr "Èçśèńëÿâàì ăđàíèöèòć íà Windows ôàéëîâàòà ńèńòćìà"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Printer connection type"
-msgstr "Òèï íà âđúçêàòà êúì ïđèíòćđà"
+msgid "Provider dns 1 (optional)"
+msgstr "1-âè DNS íà äîńòàâśèêà (ïî æćëàíèć)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Raw printer"
-msgstr "Raw ïđèíòćđ"
+msgid "Cameroon"
+msgstr "Êàìćđóí"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Do it!"
-msgstr "Íàïđàâè ăî!"
+msgid ""
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
+msgstr ""
+"Ńćăà ìîæćòć äà đàçäćëèòć %s.\n"
+"Êîăàòî ńòć ăîòîâè, íć çàáđàâÿéòć äà çàïèűćòć èçïîëçâàéêè `w'"
#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
@@ -10347,450 +10311,339 @@ msgstr "Íàïđàâè ăî!"
msgid "Close"
msgstr "Çàòâîđè"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
msgstr ""
-"Ïđèíòćđ %s\n"
-"Êàêâî èńêàòć äà ïîïđàâèòć ïî òîçè ïđèíòćđ ?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Modify printer configuration"
-msgstr "Ïîïđàâè íàńòđîéêèòć íà ïđèíòćđ"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Add a new printer"
-msgstr "Äîáàâè íîâ ïđèíòćđ"
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Normal Mode"
-msgstr "Íîđìàëćí đćæèì"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Change the printing system"
-msgstr "Ïđîìÿíà ńèńòćìàòà çà ïćśàò"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "CUPS configuration"
-msgstr "CUPS êîíôèăóđàöèÿ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
+msgid "Calendar"
+msgstr "Êàëćíäàđ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Display all available remote CUPS printers"
+msgid ""
+"Restore Selected\n"
+"Catalog Entry"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
msgstr ""
-"Ńëćäíèòć ïđèíòćđè ńà íàńòđîćíè. Öúêíćòć íà ćäèí îò òÿő, çà äà ăî đćäàêòèđàòć "
-"èëè çà äà ïîëóśèòć èíôîđìàöèÿ çà íćăî."
+"Çà äà èçïîëçâàòć îòäàëćśćí lpd ïđèíòćđ, òđÿáâà äà ïđćäîńòàâèòć èìćíàòà íà "
+"őîńòà íà ïđèíòćđíèÿ ńúđâúđ è èìćòî íà ïđèíòćđà íà òîçè ńúđâúđ."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printing system: "
-msgstr "Ïćśàòíà ńèńòćìà: "
+msgid "Iceland"
+msgstr "Èńëàíäèÿ"
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Checking installed software..."
-msgstr "Ïđîâćđêà íà èíńòàëèđàíèÿ ńîôòóćđ..."
+msgid "consolehelper missing"
+msgstr "ëèïńâà ïîìîù íà êîíçîëà"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Installing Foomatic..."
-msgstr "Èíńòàëèđàíć íà Foomatic..."
+msgid "stopped"
+msgstr "ńïđÿíà"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "ÍÍćóńïćűíà íàńòđîéêà íà ïđèíòćđ \"%s\"!"
+msgid "Whether the FPU has an irq vector"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Íàńòđîéêà íà ïđèíòćđà \"%s\"..."
+msgid "Ext2"
+msgstr "Ext2"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Reading printer data..."
-msgstr "Śćòćíć íà äàííè îò ïđèíòćđà ..."
+msgid "Expand Tree"
+msgstr "Đàçűèđè äúđâîòî"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Êîÿ ïđèíòćđíà ńèńòćìà (spooler) èçêàòć äà èçïîëçâàòć ?"
+msgid ""
+"The old \"%s\" driver is blacklisted.\n"
+"\n"
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Select Printer Spooler"
-msgstr "Èçáćđćòć ïđèíòćđćí spooler"
+msgid "Expert Mode"
+msgstr "Đàçűèđćíè ôóíêèöèè"
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Setting Default Printer..."
-msgstr "Ïđèíòćđ ïî ïîäđàçáèđàíć"
+#, c-format
+msgid "Printer options"
+msgstr "Îïöèè íà ïđèíòćđà"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Installing %s ..."
-msgstr "Èíńòàëèđà %s ..."
+msgid "Local Network adress"
+msgstr "Àäđćń íà Ëîêàëíà ìđćæà"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Removing %s ..."
-msgstr "Èçòđèâàíć íà %s ..."
+msgid "Backup your System files. (/etc directory)"
+msgstr "Đćçćđâíî êîïèć íà âàűèòć ńèńòćìíè ôàéëîâć (/etc äèđćêòîđèÿ)"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
+"Do you want to install the updates ?"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Ńòàđòèđàíć íà ïđèíòćđíàòà ńèńòćìà ïđè ńòàđòèđàíć"
+msgid "Samba Server"
+msgstr "Samba Ńúđâúđ"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Do you really want to configure printing on this machine?"
+"Enable/Disable IP spoofing protection."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Èíńòàëèđàíć íà ïđèíòćđíàòà ńèńòćìà â %s íèâî íà ńèăóđíîńò"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "paranoid"
-msgstr "ïàđàíîèśíî"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "high"
-msgstr "âèńîêî"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Restarting printing system..."
-msgstr "Đćńòàđòèđàíć íà ïđèíòćđíàòà ńèńòćìà"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Configuration of a remote printer"
-msgstr "Íàńòđîéêà íà îòäàëćśćí ïđèíòćđ"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
+msgid "Australian Optus cable TV"
msgstr ""
-"Íÿìàűć äîńòúï äî ìđćæàòà è òàêúâ íć ìîæćűć äà áúäć óńòàíîâćí. Ìîëÿ, "
-"ïđîâćđćòć íàńòđîéêàòà è őàđäóćđà ńè. Òîăàâà îïèòàéòć äà íàńòđîèòć "
-"îòäàëćśćíèÿ ïđèíòćđ îòíîâî."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
msgstr ""
+" <Tab>/<Alt-Tab> ìćæäó ćëćìćíòèòć | <Space> èçáèđà | <F12> ńëćäâàù ćêđàí"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Configure the network now"
-msgstr "Â ìîìćíòà íàńòđîéâàì ìđćæàòà"
+msgid "Subnet:"
+msgstr "Ïîäìđćæà:"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Go on without configuring the network"
-msgstr "Ïđîäúëæè áćç íàńòîéêà íà ìđćæàòà"
+msgid "Zimbabwe"
+msgstr "Çèìáàáâć"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
+msgid "Please enter the host name or IP."
+msgstr "Ìîëÿ, âúâćäćòć èìć íà őîńò èëè IP."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Network functionality not configured"
-msgstr "Ôóíêöèîíàëíîńòòà íà ìđćæàòà íć ć íàńòđîćíà"
+msgid "When"
+msgstr "Êîăà"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Starting network..."
-msgstr "Ńòàđòèđàíć ìđćæàòà ...."
+msgid "Second DNS Server (optional)"
+msgstr "Âòîđè DNS ńúđâúđ (ïî èçáîđ)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Refreshing printer data..."
-msgstr "Îïđćńíÿâàíć íà äàííèòć îò ïđèíòćđà ..."
+msgid "Finland"
+msgstr "Ôèíëàíäèÿ"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
+"Arguments: (arg)\n"
+"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
msgstr ""
-"Ïđćőâúđëèëè ńòć ïđèíòćđ ïî ïîäđàçáèđàíć (\"%s\"), Èńêàòć ëè äà ăî îńòàâèòć "
-"ïî ïîäđàçáèđàíć â íîâàòà ïđèíòćđíà ńèńòćìà %s ?"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Transfer printer configuration"
-msgstr "Ïđćíîń íà íàńòđîéêà íà ïđèíòćđ"
+msgid "Color depth: %s\n"
+msgstr "Äúëáîśèíà íà öâćòà: %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Transferring %s..."
-msgstr "Ïđćőâúđëÿíć íà %s ..."
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "Íć ìîæćòć äà èçêëțśèòć òîçè ïàêćò. Òîé òđÿáâà äà áúäć îáíîâćí"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "New printer name"
-msgstr "Íîâî èìć íà ïđèíòćđ"
+msgid "Loading from floppy"
+msgstr "Çàđćæäàíć îò äèńêćòà"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
-"Ïđèíòćđúò \"%s\" âćść ńúùćńòâóâà,\n"
-"íàèńòèíà ëè èńêàòć äà ïđćçàïèűćòć íàńòđîéêàòà ?"
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Èìćòî íà ïđèíòćđà òđÿáâà äà ńúäúđæà ńàìî áóêâè, śèńëà è ïîäśćđòàâêà"
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Transfer"
-msgstr "Ïđćőâúđëè"
+msgid "Slovenia"
+msgstr "Ńëîâćíèÿ"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
+"Enter a user\n"
+"%s"
msgstr ""
-"Ïđèíòćđ ń èìć \"%s\" âćść ńúùćńòâóâà â %s.\n"
-"Öúêíćòć \"Ïđćőâúđëè\", çà äà ăî ïđćçàïèűćòć.\n"
-"Ìîæćòć ńúùî òàêà äà íàïèűćòć íîâî èìć èëè äà ïđîïóńíòć ïđèíòćđà."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Do not transfer printers"
-msgstr "Íć ïđćőâúđëÿé ïđèíòćđè"
+"Âúâćäćòć ïîòđćáèòćë\n"
+"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
msgstr ""
-"\n"
-"Îòáćëćæćòć ïđèíòćđèòć, êîèòî èńêàòć äà ïđćőâúđëèòć è öúêíćòć\n"
-"\"Ïđćőâúđëè\"."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Ńúùî òàêà, ïđèíòćđè íàńòđîćíè ń PPD ôàéëîâć ïđćäîńòàâćíè îò ïđîèçâîäèòćëèòć "
-"èì èëè ń îđèăèíàëíè CUPS äđàéâćđè íć ìîăàò äà áúäàò ïđćőâúđëÿíè."
+msgid "ProgressBar color selection"
+msgstr "Èçáîđ íà öâÿò çà ëćíòàòà íà ïđîăđćń"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
msgstr ""
-"Êàòî äîïúëíćíèć, îïàűêèòć íć ńúçäàäćíè ń òàçè ïđîăđàìà èëè \"foomatic-"
-"configure\" íć ìîăàò äà áúäàò ïđćőâúđëÿíè."
+"Òîâà ńà đàçëèśíèòć çàïèńè.\n"
+"Ìîæćòć äà äîáàâèòć îùć èëè äà ïđîìćíèòć ńúùćńòâóâàùèòć."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD è LPRng íć ïîääúđæà IPP ïđèíòćđè.\n"
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ ïîääúđæà ńàìî ëîêàëíè ïđèíòćđè, îòäàëćśćíè LPD ïđèíòćđè è Socket/TCP "
-"ïđèíòćđè.\n"
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
msgstr ""
-"CUPS íć ïîääúđæà ïđèíòćđè íà Novell ńúđâúđè èëè ïđèíòćđè èçïđàùàùè äàííè âúâ "
-"ńâîáîäíî-èçăđàäćíà êîìàíäà.\n"
+"Ïóńêà êîìàíäè ïî đàçïèńàíèć âúâ âđćìć îïđćäćëćíî îò êîìàíäàòà at è ïóńêà\n"
+"íàáîđ îò äđóăè, êîăàòî íàòîâàđćíîńòòà ńïàäíć äîńòàòúśíî."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Ìîæćòć äà êîïèđàòć íàńòđîéêèòć íà ïđèíòćđà, êîèòî ńòć èçâúđűèëè çà spoller %"
-"s íà %s, òćêóùèÿ spooler. Öÿëàòà èíôîđìàöèÿ çà íàńòđîéêèòć (èìć íć ïđèíòćđ, "
-"îïèńàíèć, ìćńòîïîëîæćíèć, âèä íà âđúçêàòà è íàńòđîéêè ïî ïîäđàçáèđàíć) ńć "
-"ïđćçàïèńâàò, íî đàáîòèòć íć ńć ïđćőâúđëÿò.\n"
-"Íć âńèśêè îïàűêè ìîăàò äà áúäàò ïđćőâúđëćíè ïî ńëćäíèòć ïđèśèíè:\n"
+msgid "Radio support:"
+msgstr "Ïîäđúæêà íà đàäèî:"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
+msgid "Installing SANE packages..."
+msgstr "Èíńòàëèđàíć íà SANE ïàêćòè ..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
+msgid "boot disk creation"
+msgstr "ńúäàâàíć íà ńòàđòèđàùà äèńêćòà"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printing test page(s)..."
-msgstr "Îòïćśàòâàíć íà òćńòîâ(àòà/èòć) ńòđàíèö(à/è) ..."
+msgid "LDAP"
+msgstr "LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Print option list"
-msgstr "Ńïèńúê ń ïđèíòćđíè îïöèè"
+msgid "SILO"
+msgstr "SILO"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Ïćśàòàíć íà ïđèíòćđ \"%s\""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Ïćśàòàíć íà ïđèíòćđ \"%s\""
+msgid "Change type"
+msgstr "Ïđîìÿíè òèïà"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Ïćśàòàí/Ńêàíèđàíćć íà \"%s\""
+msgid "SILO Installation"
+msgstr "SILO èíńòàëàöèÿ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Ïćśàòàíć/Ńêàíèđàíć/Ôîòî êàđòèśêè íà ïđèíòćđ \"%s\""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
+msgid "Use CD/DVDROM to backup"
msgstr ""
-"Çà äà âèäèòć ńïèńúê íà äîńòúïíèòć îïöèè çà òćêóùèÿ ïđèíòćđ, èëè ïđîśćòćòć "
-"ńïèńúêà ïîêàçàí ïî-äîëó èëè öúêíćòć íà áóòîíà \"Ńïèńúê ń îïöèè çà ïćśàò\".%s%"
-"s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_messages.pm:1
#, c-format
msgid ""
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
+"Ïîçäđàâëćíèÿ, èíńòàëàöèÿòà ć ïđćêëțśćíà.\n"
+"Ïđćìàőíćòć ńòàđòîâîòî óńòđîéńòâî è íàòèńćíć Enter çà äà đćńòàđòèđàéòć.\n"
"\n"
-"Êîìàíäèòć \"%s\" è \"%s\" ńúùî òàêà ïîçâîëÿâàò äà ïîïđàâÿòć èçáđàíèòć "
-"íàńòđîéêè çà îïđćäćëćíà đàáîòà íà ïđèíòćđà. Ïđîńòî äîáàâćòć èńêàíèòć "
-"íàńòđîéêè êúì êîìàíäíèÿ đćä, íàïđ. \"%s <file>\".\n"
+"\n"
+"Çà èíôîđìàöèÿ îòíîńíî ïîïđàâêè, íà òàçè âćđńèÿ íà Mandrake Linux,\n"
+"ńć êîíńóëòèđàéòć ń Errata, íà àäđćń : \n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Èíôîđìàöèÿ çà íàńòđîéâàíć íà ńèńòćìàòà âè ìîæćòć äà íàìćđèòć â\n"
+"ńëćäèíńòàëàöèîííàòà ăëàâà îò Official Mandrake Linux User's Guide."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
+msgid "paranoid"
+msgstr "ïàđàíîèśíî"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Send mail report after each backup to:"
msgstr ""
#: ../../printer/printerdrake.pm:1
@@ -10804,275 +10657,220 @@ msgstr ""
"ïćśàòíèòć äèàëîçè â ìíîăî ïđèëîæćíèÿ. Íî òóê íć ïîńòàâÿéòć èìćòî íà ôàéëà, "
"çàùîòî òî ńć ïîäàâà îò ïđèëîæćíèćòî.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Çà äà îòïćśàòàòć ôàéë îò êîìàíäíèÿ đćä (òćđìèíàëćí ïđîçîđćö), èçïîëçâàéòć "
-"êîìàíäàòà \"%s <file>\" èëè \"%s <file>\".\n"
+msgid "Resolution"
+msgstr "Đàçäćëèòćëíà ńïîńîáíîńò"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
msgstr ""
-"Çà äà âèäèòć ńïèńúê ń äîńòúïíèòć îïöèè çà òćêóùèÿ ïđèíòćđ, öúêíćòć íà áóòîíà "
-"\"Ńïèńúê ń îïöèè çà ïćśàò\"."
+"Çà äà ïćśàòàòć íà SMB ïđèíòćđ, òđÿáâà äà äàäćòć èìćòî\n"
+"íà SMB őîńòà (Çàáćëćæêà ! Òî ìîæć äà ć đàçëèśíî îò TCP/IP őîńòà !)\n"
+"è âúçìîæíî IP àäđćńà íà ïđèíòćđńêèÿ ńúđâúđ, êàêòî è îáùîòî èìć íà\n"
+"ïđèíòćđà, äî êîéòî èńêàòć äîńòúï è ïîäőîäÿùî èìćí, ïàđîëà è èíôîđìàöèÿ\n"
+"çà đàáîòíàòà ăđóïà."
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
+" Accept/Refuse icmp echo."
msgstr ""
+"Arguments: (arg)\n"
"\n"
-"Êîìàíäàòà \"%s\" ńúùî òàêà âè ïîçâîëÿâà äà ïîïđàâèòć íàńòđîéêèòć íà îïöèèòć "
-"çà îïđćäćëćíà đàáîòà íà ïđèíòćđà. Ïđîńòî äîáàâćòć öćëàíèòć íàńòđîéêè êúì "
-"êîìàíäíèÿ đćä, íàïđ. \"%s <file>\". "
+"Ïîçâîëÿâà/Çàáđàíÿâà icmp echo."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Çà äà èçïćśàòàòć ôàéë îò êîìàíäíèÿ đćä (òćđìèíàëćí ïđîçîđćö) èçïîëçâàéòć "
-"êîìàíäàòà \"%s <file>\".\n"
+msgid "reconfigure"
+msgstr "ïđćíàńòđîéêà"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
-"Òîâà ć ńïèńúê îò íàëèśíè çà ïćśàò îïöèè îòíàńÿùè ńć çà òćêóùèÿò ïđèíòćđ:\n"
-"\n"
+"Êàđòàòà âè ìîæć äà èìà ïîääđúæêà íà őàđäóćđíî 3D óńêîđćíèć ń XFree %s.\n"
+"ÎÒÁĆËĆÆĆÒĆ, ŚĆ ÒÎÂÀ Ć ĆÊŃÏĆĐÈÌĆÍÒÀËÍÀ ÏÎÄÄĐÚÆÊÀ È ÊÎÌÏȚÒÚĐÚÒ ÂÈ ÌÎÆĆ ÄÀ "
+"ÇÀÁÈĆ."
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Xinetd Service"
+msgstr "Xinetd îáńëóæâàíć"
+
+#: ../../any.pm:1
+#, c-format
+msgid "access to network tools"
+msgstr "äîńòúï äî ìđćæîâè èíńòđóìćíòè"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
+msgid "Firmware-Upload for HP LaserJet 1000"
msgstr ""
-"Ìîæćòć äà èçïîëçâàòć òàçè êîìàíäà è â ïîëćòî \"Êîìàíäà çà ïćśàò\" íà "
-"ïćśàòíèòć äèàëîçè â ìíîƒî ïđèëîæćíèÿ. Íî òąê íć ïîńòàâÿéòć èìćòî íà ôàéëà, "
-"çàùîòî òî ńć ïîäàâà îò ïđèëîæćíèćòî.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
msgstr ""
-"Çà äà èçïćśàòàòć ôàéë îò êîìàíäíèÿ đćä (òćđìèíàëćí ïđîçîđćö), ìîæćòć èëè äà "
-"èçïîëçâàòć êîìàíäàòà \"%s <file>\" èëè ăđàôèśíèÿ ïćśàòàù èíńòđóìćíò: \"xpp "
-"<file>\" èëè \"kprinter <file>\". Ăđàôèśíèòć èíńòđóìćíòè âè ïîçâîëÿâàò äà "
-"èçáèđàòć ïđèíòćđà è äà ïîïđàâÿòć ëćńíî íàńòđîéêèòć íà îïöèèòć.\n"
+"Mandrake Linux 9.1 âè ïïîçâîëÿâà äà ïîëóśèòć íàé-ïîńëćäíèòć âćđńèè íà "
+"ńîôòóćđà, äà ńëóűàòć ìóçèêàëíè ôàéëîâć, äà îáđàáîòâàòć ôîòî è ăđàôèśíè "
+"ôàéëîâć, êàêòî è äà ăëćäàòć âèäćî."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Did it work properly?"
-msgstr "Ïđîđàáîòè ëè êàêòî òđÿáâà ?"
+msgid "Here is a list of all auto-detected printers. "
+msgstr "Òîâà ć ńïèńúê íà àâòîìàòèśíî îòêđèòè ïđèíòćđè."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
msgstr ""
-"Òćńòîâèòć ńòđàíèöè ńà èçïđàòćíè êúì ïđèíòćđíà.\n"
-"Ìîæć äà îòíćìć ìàëêî âđćìć ïđćäè ïđèíòćđà äà çàïîśíć.\n"
+"Ăđćűêà ïđè èíńòàëèđàíć íà aboot, \n"
+"äà ńć îïèòàì ëè äà ïđîäúëæà èíńòàëàöèÿòà äîđè, àêî òîâà óíèæòîæè ïúđâèÿ äÿë ?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
+"Options Description:\n"
"\n"
-msgstr ""
-"Òćńòîâèòć ńòđàíèöè ńà èçïđàòćíè êúì ïđèíòćđà.\n"
-"Ìîæć äà îòíćìć ìàëêî âđćìć ïđćäè ïđèíòćđà äà çàïîśíć.\n"
-"Ńúńòîÿíèć íà ïćśàòà:\n"
-"%s\n"
+" In this step Drakbackup allow you to change:\n"
"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
+"\n"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Do not print any test page"
-msgstr "Íć ïćśàòè íèêàêâà òćńòîâà ńòđàíèöà"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Photo test page"
-msgstr "Òćńòîâà ńòđàíèöà ńúń ńíèìêà"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Alternative test page (A4)"
-msgstr "Àëòćđíàòèâíà òćńòîâà ńòđàíèöà (À4)"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "Àëòćđíàòèâíà òćńòîâà ńòđàíèöà (Ïèńìî)"
+msgid ""
+"Restore Selected\n"
+"Files"
+msgstr ""
+"Âúçńòàíîâÿâà èçáđàíèòć\n"
+"ôàéëîâć"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Standard test page"
-msgstr "Ńòàíäàđòíà òćńòîâà ńòđàíèöà"
+msgid ""
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Print"
-msgstr "Ïćśàò"
+msgid "Please fill or check the field below"
+msgstr "Ìîëÿ, ïîïúëíćòć èëè ïđîâćđćòć ïîëćòî ïî-äîëó"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No test pages"
-msgstr "Áćç òćńòîâè ńòđàíèöè"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "Èńêàòć ëè äà çàïàçèòć ïđîìćíèòć â /etc/fstab"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Ìîëÿ, èçáćđćòć òćńòîâà ńòđàíèöà çà ïćśàò.\n"
-"Çàáćëćæêà: òćńòîâàòà ńòđàíèöà çà ńíèìêà ìîæć äà îòíćìć äîńòà äúëăî\n"
-"âđćìć äà ńć èçïćśàòà è íà ëàçćđíè ïđèíòćđè ń ìàëêî ïàìćò ìîæć âúîáùć\n"
-"äà íć èçëćçć. Â ïîâćśćòî ńëóśàè ć äîńòàòúśíà ńòàíäàđòíà òćńòîâà ńòđàíèöà."
+msgid "Boot Protocol"
+msgstr "Ńòàđòèđàù ïđîòîêîë"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Test pages"
-msgstr "Òćńòîâè ńòđàíèöè"
+msgid "LVM-disks %s\n"
+msgstr "LVM-äèńêîâć %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Èńêàòć ëè äà íàńòđîèòć òîçè ïđèíòćđ (\"%s\")\n"
-"êàòî ïđèíòćđ ïî ïîäđàçáèđàíć ?"
+msgid "The package %s is needed. Install it?"
+msgstr "Ïàêćò %s ć íćîáőîäèì. Äà ăî èíńòàëèđàì?"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Option %s out of range!"
-msgstr "Îïöèÿòà %s ć èçâúí ăđàíèöèòć !"
+msgid "On boot"
+msgstr "Ïđè çàđćæäàíć"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Option %s must be a number!"
-msgstr "Íàńòđîéêàòà %s òđÿáâà äà ć śèńëî !"
+msgid "Bus identification"
+msgstr "Èäćíòèôèêàöèÿ íà űèíà"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Íàńòđîéêàòà %s òđÿáâà äà ć öÿëî śèńëî !"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer default settings"
-msgstr "Èçáîđ ìîäćë íà ïđèíòćđà"
+msgid "Please make a backup of your data first"
+msgstr "Ïúđâî ńúçäàéòć backup íà ńâîèòć äàííè"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Íàńòđîéêè íà ïđèíòćđà ïî ïîäđàçáèđàíć\n"
-"\n"
-"Òđÿáâà äà ńòć ńèăóđíè, ść ăîëćìèíàòà íà ńòđàíèöàòà\n"
-"è òèïà íà ìàńòèëîòî (àêî èìà) ńà íàńòđîćíè ïđàâèëíî.\n"
-"Îòáćëćæćòć, ść ïđè ìíîăî âèńîêî êàśćńòî íà èçőîäà íà\n"
-"ïđèíòćđà, òîé ìîæć çíàśèòćëíî äà ńć çàáàâè."
+msgid "Vatican"
+msgstr "Âàòèêàíà"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr ""
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr "èìàòć ïîâćść îò ćäèí òâúđäè äèńêîâć, êîé äà èçïîëçâàì çà èíńòàëàöèÿòà?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+msgid "Boot ISO"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Íàńòđîéêà íà Lexmark inkjet"
+msgid "Eritrea"
+msgstr "Ćđèòđćÿ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Inkjet ïđèíòćđíèòć äđàéâćđè ïđćäîńòàâćíè îò Lexmark ïîääúđæàò ńàìî ëîêàëíè "
-"ïđèíòćđè, áćç ïđèíòćđè íà îòäàëćśćíè ìàűèíè èëè ïđèíòćđíè ìàűèíè. Ìîëÿ, "
-"ńâúđæćòć ïđèíòćđà ńè íà ëîêàëćí ïîđò èëè ăî íàńòđîéòć íà ìàűèíàòà, êúì êîÿòî "
-"ć ńâúđçàí."
+msgid "Remove List"
+msgstr "Èçòđèâà ńïèńúê"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+msgid "A customizable environment"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "OKI winprinter configuration"
-msgstr "Íàńòđîéêè íà OKI Winprinter"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr "Àêî âàűèÿò ïđèíòćđ íć ć â ńïèńúêà, èçáćđćòć ńúâìćńòèì èëè ïîäîáćí."
+msgid "Inuktitut"
+msgstr "Èíóêòèòóò"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
+msgid "Morocco"
+msgstr "Ìàđîêî"
#: ../../printer/printerdrake.pm:1
#, c-format
@@ -11081,1433 +10879,1180 @@ msgstr "Êàêúâ ìîäćë ïđèíòćđ èìàòć ?"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer model selection"
-msgstr "Èçáîđ ìîäćë íà ïđèíòćđà"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Reading printer database..."
-msgstr "Śćòćíć íà áàçàòà äàííè îò ïđèíòćđè ..."
+msgid "Add a new printer"
+msgstr "Äîáàâè íîâ ïđèíòćđ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Select model manually"
-msgstr "Èçáîđ íà ìîäćë đúśíî"
+msgid " All of your selected data have been "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "The model is correct"
-msgstr "Òîçè ìîäćë ć ïđàâèëćí"
+msgid "<-- Delete"
+msgstr "<-- Èçòđèâà"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
+msgid "Nepal"
+msgstr "Íćïàë"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Your printer model"
-msgstr "Âàűèÿò ìîäćë ïđèíòćđ"
+msgid "cpu # "
+msgstr "cpu # "
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Preparing printer database..."
-msgstr "Ïîäăîòâÿíć íà áàçàòà äàííè îò ïđèíòćđè ..."
+msgid "chunk size"
+msgstr "ăîëćìèíà íà ïàđśćòî"
-#: ../../printer/printerdrake.pm:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "Location"
-msgstr "Ìćńòîïîëîæćíèć"
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "êîìàíäèòć ïđćäè ńòàđòèđàíć, èëè 'c' çà êîìàíäćí đćä."
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Description"
-msgstr "Îïèńàíèć"
+msgid "Problems installing package %s"
+msgstr "Ïđîáëćìè ń èíńòàëèđàíćòî íà ïàêćòà %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Name of printer"
-msgstr "Èìć íà ïđèíòćđ"
+msgid "You will receive an alert if the load is higher than this value"
+msgstr "Âèć ùć ïîëóśèòć òđćâîăà àêî íàòîâàđâàíćòî ć ïî-âèńîêî îò òàçè ńòîéíîńò"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
msgstr ""
-"Âńćêè ïđèíòćđ ńć íóæäàć îò èìć (íàïđèìćđ \"printer\"). Ïîëćòàòà Îïèńàíèć è "
-"Ìćńòîïîëîæć íć òđÿáâà äà áúäàò ïîïúëâàíè. Èìà êîìćíòàđè çà ïîòđćáèòćëèòć."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr "Âúâćäćòć èìć íà ïđèíòćđ è êîìćíòàđ"
+msgid "Add a scanner manually"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr "Ïđàâè ïîđòà íà ïđèíòćđà íàëèśćí çà CUPS..."
+msgid "Reload partition table"
+msgstr "Ïđćçàđćäè òàáëèöàòà ń äÿëîâćòć"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Checking device and configuring HPOJ..."
-msgstr "Ïđîâćđêà íà óńòđîéńòâî è êîíôèăóđàöèÿ çà HPOJ..."
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr "Äà, èńêàì autologin ń òîâà (ïîòđćáèòćë, äćńêòîï)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Photo memory card access on your HP multi-function device"
+msgid "Search for fonts in installed list"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr "Ńêàíèđà íà âàűćòî HP ìíîăîôóíêöèîíàëíî óńòđîéńòâî"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Installing mtools packages..."
-msgstr "Èíńòàëèđàíć íà mtools ïàêćòè..."
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Installing SANE packages..."
-msgstr "Èíńòàëèđàíć íà SANE ïàêćòè ..."
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Boot"
+msgstr "Ăëàâćí"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Installing HPOJ package..."
-msgstr "Èíńòàëèđàíć íà HPOJ ïàêćòè ..."
+msgid "Tuner type:"
+msgstr "Òèï íà òóíćđ:"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
msgstr ""
-"Äàëè âàűèÿò ïđèíòćđ ć ìíîăîôóíêöèîíàëíî óńòđîéńòâî îò HP èëè Sony "
-"(OfficeJet, PSC, LaserJet 1100/1200/1220/3200/3300 ńúń ńêćíćđ, Sony IJP-"
-"V100), HP PhotoSmart èëè HP LaserJet 2200?"
+"Äîéäć âđćìćòî äà èçáćđćòć ńèńòćìà çà ïćśàò çà âàűèÿ êîìïțòúđ.Äđóăèòć\n"
+"îïćđàöèîííè ńèńòćìè ìîæć äà âè ïđćäëàăàò ćäíà,íî íèć âè ïđćäëàăàìć äâć.\n"
+"Âńÿêà îò òÿő ć ïđèăîäćíà çà äàäćí òèï êîíôèăóđàöèÿ.\n"
+"\n"
+" * \"%s\"-- ć àêđîíèì íà \"print,don't queue\"(\"ïàśàòàé,íć śàêàé\"),ć "
+"èäćàëíèÿò\n"
+"èçáîđ,àêî èìàòć äèđćêòíà âđúçêà ń ïđèíòćđà,èńêàòć äà ăî êîíòđîëèđàòć,èëè\n"
+"íÿìàòć ìđćæîâè ïđèíòćđè.(\"%s\" ìîæć äà đàáîòè ńàìî â ìíîăî ïđîńòè\n"
+"ńèòóàöèè è ć íÿêàê áàâćí,êîăàòî ńć ïîëçâà â ìđćæà.) Ïđćïîđúśèòćëíî ć äà \n"
+"èçïîëâàòć \"pdq\" àêî íÿìàòć îïèò ń GNU/Linux. \n"
+" * \"%s\" - `` Common Unix Printing System``(îáèśàéíà ńèńòćìà çà ïćśàò çà "
+"Unix)\n"
+"ć îòëèśćí èçáîđ,çà ïćśàò êàêòî íà ńîáńòâćíèÿ âè ïđèíòćđ,òàêà è íà äđóă,íà\n"
+"ïîëîâèí ńâÿò đàçńòîÿíèć.Òÿ ć ëćńíà çà êîíôèăóđèđàíć è ìîæć đàáîòè êàòî\n"
+"êëèćíò èëè ńúđâúđ íà àđőàèśíàòà\"lpd \",êîćòî ÿ ïđàâè íàïúëíî ńúâìćńòèìà\n"
+"ń ïî-ńòàđè îïćđàöèîííè ńèńòćìè,êîèòî ìîæć âńć îùć äà ńć íóæäàÿò îò òàçè\n"
+"óńëóăà.Âúïđćêè ść ć äîńòà ìîùíà,îńíîâíàòà èíńòàëàöèÿ ć ïîśòè òîëêîâà \n"
+"ëćńíà,êîëêîòî è òàçè íà \"pdq\".Àêî èńêàòć äà ćìóëèđàòć \"lpd\" ńúđâúđ,\n"
+"óâćđćòć ńć,ść \"cups-lpd\" äćìîíà ć ïóńíàò.\"%s\" âêëțśâà ăđàôèśíè \n"
+"èíòćđôćéńè çà ïđćśàò è èçáîđ íà îïöèè çà ïđèíòćđà,êàêòî è çà\n"
+"êîíôèăóđèđàíćòî ìó.\n"
+"\n"
+"Àêî ńćăà íàïđàâèòć èçáîđ,à ïî-êúńíî đàçáćđćòć,ść íć őàđćńâàòć ńèńòćìàòà\n"
+"ńè çà ïćśàò,ìîæćòć äà ÿ ńìćíèòć êàòî ïóńíćòć PrinterDrake îò Ìàíäđćéê \n"
+"êîíòđîëèÿ öćíòúđ è öúêíćòć íà \"ćêńïćđò\"."
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "A command line must be entered!"
-msgstr "Òđÿáâà äà áúäć âúâćäćí êîìàíäćí đćä!"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Command line"
-msgstr "Êîìàíäćí đćä"
+msgid "\"Menu\" key"
+msgstr "\"Menu\" êëàâèű"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Pipe into command"
-msgstr "Ïđîăđàìćí êàíàë êúì êîìàíäà"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Detected model: %s %s"
-msgstr "Îòêđèò ìîäćë: %s %s"
+msgid "Security Administrator:"
+msgstr "Àäìèíèńòđàòîđ ïî çàùèòà:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A valid URI must be entered!"
-msgstr "Òđÿáâà äà áúäć âúâćäćí âàëèäćí URI!"
+msgid "Please enter your login"
+msgstr "Ìîëÿ, âúâćäćòć âàűèÿò ëîăèí"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Printer Device URI"
-msgstr "Ïćśàòàùî óńòđîéńòâî URI"
+msgid "if set to yes, check permissions of files in the users' home."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
msgstr ""
-"Òđÿáâà äèđćêòíî äà îïđćäćëèòć URI çà äîńòúï äî ïđèíòćđà. URI òđÿáâà äà "
-"èçïúëíè èëè CUPS èëè Foomatic ńïćöèôèêàöèèòć. Îòáćëćæćòć, ść íć âńèśêè "
-"òèïîâć URI ńć ïîääđúđæàò îò spooler-èòć."
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Port"
-msgstr "Ïîđò"
+"Íÿìàòć Internet âđúçêà.\n"
+"Ńúçäàéòć òàêàâà, êàòî öúêíćòć íà 'Íàńòđîé'"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Printer host name or IP"
-msgstr "Èìć íà őîńò çà ïđèíòćđà èëè IP"
+msgid "Fonts copy"
+msgstr "Êîïèđà űđèôòîâć"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "The port number should be an integer!"
-msgstr "Íîìćđúò íà ïîđòà òđÿáâà äà ć öÿëî śèńëî !"
+msgid "Automated"
+msgstr "Àâòîìàòèçèđàí"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Ëèïńâà èìć íà őîńò íà ïđèíòćđa èëè IP!"
+msgid "Do you want to test the configuration?"
+msgstr "Èńêàòć ëè äà òćńòâàòć íàńòđîéêèòć?"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"Çà äà ïćśàòàòć íà socket èëè TCP ïđèíòćđ, òđÿáâà äà ïđćäîńòàâèòć èìćòî íà "
-"őîńòà íà ïđèíòćđà è, ćâćíòóàëíî, íîìćđ íà ïîđò. Íà HP JetDirect ńúđâúđè, "
-"íîìćđúò íà ïîđòà îáèêíîâćííî ć 9100, íà äđóăè ńúđâúđè ìîæć äà âàđèđà. Âèæòć "
-"đúêîâîńòâîòî íà őàđäóćđà ńè."
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
+msgstr "Ïđèíòćđúò \"%s\" áćűć óńïćűíî ïđćìàőíàò îò ffice/OpenOffice.org/GIMP."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+" to the Internet as a client.\n"
+"\n"
+"High: There are already some restrictions, and more automatic checks "
+"are run every night.\n"
+"\n"
+"Higher: The security is now high enough to use the system as a server "
+"which can accept\n"
+" connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+" should choose a lower level.\n"
+"\n"
+"Paranoid: This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+" features are at their maximum\n"
+"\n"
+"Security Administrator:\n"
+" If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+" email)"
msgstr ""
-"Èçáćđćòć ćäèí îò àâòîìàòèśíî îòêđèòèòć ïđèíòćđè â ńïèńúêà ăîđć èëè âúâćäćòć "
-"èìć íà őîńò èëè IP è îïöèîíàëíî íîìćđ íà ïîđò (ïîäđàçáèđàù 9100) â ïîëćòî."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/Socket Îïöèè íà ïđèíòćđ"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Host \"%s\", port %s"
-msgstr "Őîńò \"%s\", ïîđò %s"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", őîńò \"%s\", ïîđò %s"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Scanning network..."
-msgstr "Ńòàđòèđàíć ìđćæàòà...."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer auto-detection"
-msgstr "Àâòîìàòèśíî îòêđèâà ïđèíòćđ"
+msgid "Save packages selection"
+msgstr "Çàïàçè èçáîđ íà ïàêćòè"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "NCP queue name missing!"
-msgstr "Ëèïńâà èìć íà NCP îïàűêà !"
+msgid "Remove the last item"
+msgstr "Èçòđèâà ïîńëćäíèÿò îáćêò"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "NCP server name missing!"
-msgstr "Ëèïńâà èìć íà NCP ńúđâúđ !"
+msgid "User list to restore (only the most recent date per user is important)"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Print Queue Name"
-msgstr "Èìć íà ïćśàòíàòà îïàűêàòà"
+msgid "No net boot images created!"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Printer Server"
-msgstr "Ńúđâúđ íà ïđèíòćđà"
+msgid "use pptp"
+msgstr "èçïîëçâàé PPPTP"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Çà äà ïćśàòèòć íà NetWare ïđèíòćđ ,òđÿáâà äà çíàćòć èìćî ìó è âúçìîæíî\n"
-"àäđćńà íà ńúđâúđà, êàêòî è èìćòî íà îïàűêàòà,ïîòđćáèòćëńêîòî èìć,ïàđîëà. "
-"(çàáćëćæêà! òîé ìîæć äà ć đàçëèśćí îò TCP/IP èìć íà őîńò!)"
+msgid "Choose which services should be automatically started at boot time"
+msgstr "Èçáèđà óńëóăèòć, êîèòî òđÿáâà äà ńć ïóńíàò ïđè ïóńêàíć íà ìàűèíàòà"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "NetWare Printer Options"
-msgstr "Îïöèè çà NetWare ïđèíòćđ"
+msgid "Learn how to use this printer"
+msgstr "Íàóśćòć êàê äà èçïîçëâàòć òîçè ïđèíòćđ"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"Ńâúđçâà âàűèÿò ïđèíòćđ êúì Linux ńúđâúđ è ïîçâîëÿâà Windows ìàűèíè äà ńć "
-"ńâúđçâàò êúì íćăî êàòî êëèćíòè.\n"
-"\n"
-"Èńêàòć ëè, äà ïđîäúëæèòć íàńòđîéêèòć çà òîçè ïđèíòćđ êàêòî ïđàâćőòć äî ńćăà?"
+msgid "Configure the network now"
+msgstr "Â ìîìćíòà íàńòđîéâàì ìđćæàòà"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
+msgid "Choose a mirror from which to get the packages"
+msgstr "Èçáćđćòć îăëćäàëćí ńúđâúđ,îò êîéòî äà ïîëóśèòć ïàêćòèòć"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
msgstr ""
+"Íć âúçìîæíîńò çà đàáîòà ń âàűèÿ FAT äÿë, \n"
+"ïîđàäè ïîëóśćíàòà ăđćűêà: %s"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SECURITY WARNING!"
-msgstr "ÏĐĆÄÓÏĐĆÆÄĆÍÈĆ ÇÀ ŃÈĂÓĐÍÎŃÒ!"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Samba share name missing!"
-msgstr "Ëèïńâà èìć íà SAMBA share !"
+msgid "Which sector do you want to move it to?"
+msgstr "Íà êîé ńćêòîđ èńêàòć äà ăî ïđćìćńòèòć?"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Òđÿáâà äà áúäàò çàäàäćíè è èìćòî è IP àäđćńà íà ńúđâúđà !"
+msgid "Do you want to click on this button?"
+msgstr "Èńêàòć ëè äà öúêíćòć íà òîçè áóòîí?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Auto-detected"
-msgstr "Àâòîìàòèśíî çàńćśćí"
+msgid "Bahamas"
+msgstr "Áàőàìè"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Workgroup"
-msgstr "Đàáîòíà ăđóïà"
+msgid "Manual configuration"
+msgstr "Đúśíà íàńòđîéêà"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Share name"
-msgstr "Îáùî èìć"
+msgid "search"
+msgstr "òúđńè"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "SMB server IP"
-msgstr "IP íà SMB ńúđâúđ:"
+msgid ""
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
+msgstr ""
+"Òîçè ïàêćò çàđćæäà ìàđêèđàíàòà êëàâèàòóđíà íàđćäáà â /etc/sysconfig/"
+"keyboard.\n"
+"Òÿ ìîæć äà áúäć èçáđàíà ń èíńòđóìćíòà kbdconfig. Òđÿáâà äà îńòàâèòć "
+"òîâàâêëțśćíî çà ïîâćśćòî ìàűèíè."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "SMB server host"
-msgstr "Őîńò íà SMB ńúđâúđ"
+msgid "Xpmac (installation display driver)"
+msgstr "Xpmac (èíńòàëàöèÿ ăđàôèśćí äđàéâćđ)"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
+msgid "Zeroconf host name must not contain a ."
msgstr ""
-" Àêî æćëàíèÿò ïđèíòćđ ć îòêđèò àâòîìàòèśíî, ïđîńòî èçáćđćòć ăî îò ńïèńúêà è "
-"òîăàâà äîáàâćòć èìć íà ïîòđćáèòćë, ïàđîëà, è/èëè đàáîòíà ăđóïà àêî ć "
-"íćîáőîäèìî."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
msgstr ""
-"Çà äà ïćśàòàòć íà SMB ïđèíòćđ, òđÿáâà äà äàäćòć èìćòî\n"
-"íà SMB őîńòà (Çàáćëćæêà ! Òî ìîæć äà ć đàçëèśíî îò TCP/IP őîńòà !)\n"
-"è âúçìîæíî IP àäđćńà íà ïđèíòćđńêèÿ ńúđâúđ, êàêòî è îáùîòî èìć íà\n"
-"ïđèíòćđà, äî êîéòî èńêàòć äîńòúï è ïîäőîäÿùî èìćí, ïàđîëà è èíôîđìàöèÿ\n"
-"çà đàáîòíàòà ăđóïà."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Íàńòđîéêè íà SMB (Windows 9x/NT) ïđèíòćđ"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Ïđèíòćđ \"%s\" íà ńúđâúđ \"%s\""
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", ïđèíòćđ \"%s\" íà ńúđâúđ \"%s\""
+"Syslog ć ïđîăđàìà êîÿòî ìíîăî äćìîíè èçïîëçâàò äà çàïàçâàò ńúîáùćíèÿ â\n"
+"đàçëèśíè ńèńòćìíè ôàéëîâć (ëîăîâć). Äîáđć ć ïîńòîÿííî äà ÿ èìàòć đàáîòćùà."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Remote printer name missing!"
-msgstr "Ëèïńâà èìć íà îòäàëćśćí ïđèíòćđ !"
+msgid "Unknown/Others"
+msgstr "Íćèçâćńòíè/Äđóăè"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Remote host name missing!"
-msgstr "Ëèïńâà èìć íà èìć íà őîńò !"
+msgid "No TV Card detected!"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Remote printer name"
-msgstr "Èìć íà îòäàëćśćí ïđèíòćđ"
+msgid "Options"
+msgstr "Îïöèè"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote host name"
-msgstr "Èìć íà îòäàëćśćí őîńò"
+msgid "The printer \"%s\" is set as the default printer now."
+msgstr "Ïđèíòćđúò \"%s\" âćść ć îïđćäćëćí çà ïîëçâàíć ïî ïîäđàçáèđàíć."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
msgstr ""
-"Çà äà èçïîëçâàòć îòäàëćśćí lpd ïđèíòćđ, òđÿáâà äà ïđćäîńòàâèòć èìćíàòà íà "
-"őîńòà íà ïđèíòćđíèÿ ńúđâúđ è èìćòî íà ïđèíòćđà íà òîçè ńúđâúđ."
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Îïöèè íà îòäàëćśćí lpd-ïđèíòćđ"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Manual configuration"
-msgstr "Đúśíà íàńòđîéêà"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgstr "Ăćíćđàöèÿ íà cpu (íàïđ: 8 çà PentiumIII, ...)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Òđÿáâà äà âúâćäćòć/èçáćđćòć ïđèíòćđ/óńòđîéńòâî!"
+msgid "Auto-detected"
+msgstr "Àâòîìàòèśíî çàńćśćí"
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-" (Ïàđàëćëíè ïîđòîâć: /dev/lp0, /dev/lp1, ..., ńúîòâćòńâàùè íà LPT1:, "
-"LPT2:, ..., 1-âè USB ïđèíòćđ: /dev/usb/lp0, 2-đè USB ïđèíòćđ: /dev/usb/"
-"lp1, ...)."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Ìîëÿ, èçáćđćòć ïîđò êúì êîéòî ńâúđçàí ïđèíòćđà âè."
+"Íà ïúò ńòć äà íàńòđîèòć êîìïțòúđà ńè òàêà, ść äà ïîäćëÿ Èíòćđíćò âđúçêàòà\n"
+"ńè. Ń òàçè âúçìîæíîńò, äđóăè êîìïțòđè â ëîêàëíàòà âè ìđćæà ùć ìîăàò äà\n"
+"èçïîëçâàò Èíòćđíćò âđúçêàòà íà òîçè êîìïțòúđ.\n"
+"\n"
+"Îòáćëćæćòć: òđÿáâà âè îòäćëćí çà òîâà ìđćæîâ àäàïòćđ, çà äà óńòàíîâèòć "
+"âúòđćűíàòà ńè ìđćæà (LAN)."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
-"Ìîëÿ, èçáćđćòć ïîđòà íà êîéòî âàűèÿò ïđèíòćđ ć çàêàśćí èëè âúâćäćòć èìć íà "
-"óńòđîéńòâî/èìć íà ôàéë âúâ âőîäíîòî ïîëć"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Ìîëÿ, èçáćđćòć ńćđèćí ïîđò êúì êîéòî ńâúđçàí ìîäćìúò âè."
+"Íÿìà ńâîáîäíî ìÿńòî çà 1 ÌÁ ńòàđòèđàùî ïîëć ! Èíńòàëàöèÿòà ùć ïđîäúëæè, íî, "
+"çà äà ńòàđòèđàòć ńèńòćìàòà ńè, ùć òđÿáâà äà ńúçäàäćòć ńòàđòèđàùî ïîëć â "
+"DiskDrake"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+"Please choose the printer you want to set up or enter a device name/file "
+"name in the input line"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr "Òîâà ć ńïèńúê íà àâòîìàòèśíî îòêđèòè ïđèíòćđè."
+msgid "Refuse"
+msgstr "Îòêàæè"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr "Çà ńćăà, íÿìà íàëèśíà àëòćđíàòèâà"
+msgid "HFS"
+msgstr "HFS"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
msgstr ""
-"Êîíôèăóđàöèÿòà íà ïđèíòćđà ùć đàáîòè íàűúëíî àâòîìàòèśíî. Àêî âàűèÿò ïđèíòćđ "
-"íć ć áèë êîđćêòíî îòêđèò èëè âèć ïđćäïîśèòàòć íà íàńòđîèòć ïđèíòćđà, "
-"âêëțśćòć íà \"Đúśíà êîíôèăóđàöèÿ\"."
+"HardDrake ïđàâè ïđîáè íà őàđäóćđà, è ćâćíòóàëíî íàńòđîéâà\n"
+"íîâ/ïđîìćíćí őàđäóćđ."
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, c-format
-msgid "The following printer was auto-detected. "
-msgstr "Ńëćäíèòć ïđèíòćđè ńà àâòîìàòèśíî îòêđèòè. "
+msgid "Remote Printers"
+msgstr "Îòäàëćśćí ïđèíòćđ"
-#: ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
-msgstr ""
+msgid "Creating and formatting file %s"
+msgstr "Ńúçäàâàíć è ôîđìàòèđàíć íà ôàéë %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Please choose the printer you want to set up or enter a device name/file "
-"name in the input line"
+msgid "if set to yes, check additions/removals of sgid files."
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
-"Àëòćđíàòèâíî, âèć ìîæć äà çàäàäćòć èìć íà óńòđîéńòâî/ôàéë â èçőîäíèÿ đćä"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
-msgstr ""
-"Àêî òîé íć ć òîçè êîéòî èńêàòć äà êîíôèăóđèđàòć, âúâćäćòć èìć íà óńòđîéńòâî/"
-"èìć íà ôàéë âúâ âőîäíîòî ïîëć"
+msgid "Choose an existing LVM to add to"
+msgstr "Èçáćđćòć ńúùćńòâóâàù LVM çà ïđèáàâÿíć"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Available printers"
-msgstr "Íàëèśíè ïđèíòćđè"
+msgid "xfs restart"
+msgstr "xfs đćńòàđòèđà"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No printer found!"
-msgstr "Íÿìà íàìćđćí ïđèíòćđ!"
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
+"Ïđèíòćđúò \"%s\" âćść ńúùćńòâóâà,\n"
+"íàèńòèíà ëè èńêàòć äà ïđćçàïèűćòć íàńòđîéêàòà ?"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "You must enter a device or file name!"
-msgstr "Âèć òđÿáâà äà âúâćäćòć óńòđîéńòâî èëè èìć íà ôàéë!"
+msgid "No partition available"
+msgstr "íÿìà äÿëîâć íà đàçïîëîæćíèć"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+msgid "Use the scanners on hosts: "
msgstr ""
-"Íÿìà íàìćđćí ëîêàëćí ïđèíòćđ! Çà äà èíńòàëèđàòć đúśíî ïđèíòćđ, âúâćäćòć èìć "
-"íà óńòđîéńòâî/èìć íà ôàéë âúâ âőîäíîòî ïîëć (Ïàđàëćëíè ïîđòîâć /dev/lp0, /"
-"dev/lp1, ..., ńúîòâćòńâàùè íà LPT1:, LPT2:, ..., 1-âè USB ïđèíòćđ: /dev/usb/"
-"lp0, 2-đè USB ïđèíòćđ: /dev/usb/lp1, ...)."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Local Printer"
-msgstr "Ëîêàëćí ïđèíòćđ"
+msgid "Unselected All"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "USB printer \\#%s"
-msgstr "USB ïđèíòćđ \\#%s"
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Domain Name Resolver"
+msgstr "Èìć íà äîìćéíà"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "Ïđèìćđ íà ïàđàëćëćí ïîđò \\#%s"
+msgid "Encryption key (again)"
+msgstr "Êëțś çà êđèïòèđàíć (îòíîâî)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Ïđèíòćđ \"%s\" íà SMB/Windows ńúđâúđ \"%s\""
+msgid "Samba share name missing!"
+msgstr "Ëèïńâà èìć íà SAMBA share !"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Ìđćæîâ ïđèíòćđ \"%s\", ïîđò %s"
+msgid "True Type install done"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Detected %s"
-msgstr "Çàńćśćí %s"
+msgid "Detection in progress"
+msgstr "Îòêđèâàíć â ïđîăđćń"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ", ïđèíòćđ \"%s\" íà SMB/Windows ńúđâúđ \"%s\""
+msgid "Build Whole Kernel -->"
+msgstr "Ïîńòđîÿâà öÿëîòî ÿäđî -->"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", ìđćæîâè ïđèíòćđ \"%s\", ïîđò %s"
+msgid "Welcome to %s"
+msgstr "Äîáđć äîűëè â %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "Ńëîæćòć äèńêćòà çà îáíîâÿâàíć íà ìîäóëè â óńòđîéńòâî %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgid "Bootsplash"
msgstr ""
-"Àâòîìàòèśíî îòêđèâà ïđèíòćđè ńâúđçàíè ń ìàűèíè đàáîòćùè ïîä Microsoft Windows"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr "Àâòîìàòèśíî îòêđèâà ïđèíòćđè ńâúđçàíè äèđćêòíî êúì ëîêàëíàòà ìđćæà"
+msgid ""
+"The following printer\n"
+"\n"
+"%s%s\n"
+"is directly connected to your system"
+msgstr ""
+"Ńëćäíèÿò ïđèíòćđ\n"
+"\n"
+"%s%s\n"
+"ć äèđćêòíî ńâúđçàí êúì âàűàòà ńèńòćìà"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Àâòîìàòèśíî îòêđèâà ïđèíòćđè ńâúđçàíè êúì òàçè ìàűèíà"
+msgid "Printer sharing on hosts/networks: "
+msgstr "Ïđèíòćđ ïîäćëćí íà őńîòîâć/ìđćæè: "
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
"\n"
-"Äîáđć äîűëè íà Ìàăüîńíèêà çà êîíôèăóđèđàíć íà Ïđèíòćđ\n"
-"\n"
-"Òàé ùć âè ïîìîăíć äà èíńòàëèđàòć âàűèòć ïđèíòćđè ńâúđçàíè êúì êîìïțòúđà.\n"
-"\n"
-"Àêî èìàòć ïđèíòćđ(è) ńâúđçàíè êúì òàçè ìàűèíà, âêëțśćòć ăè, òàêà ść òć äà "
-"ìîăàò äà ńć êîíôèăóđèđàò àâòîìàòèśíî.\n"
-"\n"
-"Öúêíćòć íà \"Ńëćäâàùî\" êîăàòî ńòć ăîòîâè, è íà \"Ïđćêúńâà\" àêî íć èńêàòć "
-"äà íàńòđîéâàòć ïđèíòćđèòć ńćăà."
+"Êîìàíäàòà \"%s\" ńúùî òàêà âè ïîçâîëÿâà äà ïîïđàâèòć íàńòđîéêèòć íà îïöèèòć "
+"çà îïđćäćëćíà đàáîòà íà ïđèíòćđà. Ïđîńòî äîáàâćòć öćëàíèòć íàńòđîéêè êúì "
+"êîìàíäíèÿ đćä, íàïđ. \"%s <file>\". "
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
+"Â íÿêîè ńëóśàè, %s äđàéâćđúò ńć íóæäàć îò äîïúëíèòćëíà èíôîđìàöèÿ, çà\n"
+"äà đàáîòè êîđćêòíî, âúïđćêè ść íîđìàëíî đàáîòè è áćç íćÿ. Æćëàćòć ëè "
+"äàïîäàäćòć\n"
+"äîïúëíèòćëíè îïöèè çà íćăî èëè äà đàçđćűèòć íà äđàéâćđà äà ïîòúđńè "
+"èíôîđìàöèÿòà\n"
+"îò êîÿòî ńć íóæäàć ? Ïî ïđèíöèï òîâà ìîæć äà çàáèć êîìïțòúđà âè, íî íÿìà äà "
+"ăî ïîâđćäè."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+msgid "Not the correct CD label. Disk is labelled %s."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
+"%s\n"
"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"Click on Configure to launch the setup wizard."
msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
+"Äîáđć äîűëè â èíńòđóìćíòà çà ńïîäćëÿíć íà Èíòćđíćò âđúçêàòà !\n"
"\n"
+"%s\n"
"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
-msgstr ""
+"Öúêíćòć ``Íàńòđîé'', àêî èńêàòć äà ńòàđòèđàíć óńòàíîâÿâàùèÿ ìàăüîńíèê."
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid ")"
-msgstr ""
+msgid "Cuba"
+msgstr "Êóáà"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on "
-msgstr ""
+msgid "Searching for new printers..."
+msgstr "Òúđńè çà íîâè ïđèíòćđè..."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "("
-msgstr ""
+msgid "Belize"
+msgstr "Áćëèç"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuring printer ..."
-msgstr "Íàńòđîéêà íà ïđèíòćđà \"%s\" ..."
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid " (multi-session)"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Searching for new printers..."
-msgstr "Òúđńè çà íîâè ïđèíòćđè..."
+msgid "Kernel Boot Timeout"
+msgstr "Èçśàêâàíć çà ńòàđòèđàíć íà ÿäđîòî"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"ÇÀÁĆËĆÆÊÀ: Â çàâèńèìîńò îò ìîäćëà ïđèíòćđ è ïćśàòàùàòà ńèńòćìà äî %d MB "
-"äîïúëíèòćëíî ńîôòóćđ ùć áúäć èíńòàëèđàí."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr "Ńèăóđíè ëè ńòć, ść èńêòć äà íàńòđîèòć ïćśàò çà òàçè ìàűèíà?\n"
+"Êàđòàòà âè ìîæć äà èìà ïîääđúæêà íà őàđäóćđíî 3D óńêîđćíèć, íî ńàìî ń Xfree %"
+"s.\n"
+"Êàđòàòà âè ńć ïîääúđæà îò XFree %s, êîéòî ìîæć äà èìà ïî-äîáđà ïîääđúæêà íà "
+"2D."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Èńêàòćëè äà đàçđćűèòć ïćśàò çà ïđèíòćđèòć ńïîìćíàòè ăîđć?\n"
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "Ïîìîùíèêúò çà đàçäćëèíć íà äÿëîâć íà DrakX íàìćđè ńëćäíèòć đćűćíèÿ:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "Èńêàòć ëè äà đàçđćűèòć ïćśàò íà ïđèíòćđèòć â ëîêàëíàòà ìđćæà?\n"
+msgid "Hungarian"
+msgstr "Óíăàđńêà"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
msgstr ""
-"Èńêàòć ëè äà đàçđćűèòć ïćśàò íà ïđèíòćđèòć ńïîìćíàòè ăîđć èëè íà ïđèíòćđèòć "
-"â ëîêàëíàòà ìđćæà?\n"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr " (Óáćäćòć ńć, ść ïđèíòćđèòć ńà ńâúđçàíè è âêëțśćíè).\n"
+"Ïîńîśćòć äîńòàâśèêà ńè.\n"
+" Àêî íć ć â ńïèńúêà, èçáćđćòć Unlisted"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr "Íÿìà íàìćđćíè ïđèíòćđè âêëțśćíè äèđćêòíî êúì ìàűèíàòà âè"
+msgid "Automatic time synchronization (using NTP)"
+msgstr "Àâòîìàòèśíà ńèíőđîíèçàöèÿ íà âđćìćòî (èçïîëçâà NTP)"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-"\n"
-"Èìà %d íćèçâćńòíè ïđèíòćđè âêëțśćíè êúì âàűàòà ńèńòćíìà"
+msgid "8 MB"
+msgstr "8 ÌÁ"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"Èìà ćäèí íćèçâćńòćí ïđèíòćđ âêëțśćí êúì âàűàòà ńèńòćíìà"
+msgid "LDAP Server"
+msgstr "LDAP ńúđâúđ"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
msgstr ""
-"Ńëćäíèÿò ïđèíòćđ\n"
-"\n"
-"%s%s\n"
-"ć äèđćêòíî ńâúđçàí êúì âàűàòà ńèńòćìà"
+"PCMCIA ïîääúđæêàòà îáèêíîâćííî ïîääúđæà íćùà êàòî ethernet è ìîäćìè â\n"
+"laptop-è. Òîâà íÿìà äà ńć ńòàđòèđà ïđćäè äà áúäć íàńòđîćí, òàêà ść ć\n"
+"ïî-äîáđć äà ÿ èìàòć èíńòàëèđàíà íà ìàűèíè, êîèòî íć ńć íóæäàÿò îò íćÿ."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"Ńëćäíèÿ ïđèíòćđ\n"
-"\n"
-"%s%s\n"
-"ć äèđćêòíî ńâúđçàíè êúì âàűàòà ńèńòćìà"
+msgid "Choose your country"
+msgstr "Èçáćđćòć ńòđàíàòà ńè"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The following printers\n"
"\n"
-"%s%s\n"
-"are directly connected to your system"
+"- System Files:\n"
msgstr ""
-"Ńëćäíèòć ïđèíòćđè\n"
"\n"
-"%s%s\n"
-"ńà äèđćêòíî ńâúđçàíè êúì âàűàòà ńèńòćìà"
+"- Ńèńòćìíè ôàéëîâć:\n"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "and %d unknown printers"
-msgstr "è %d íćèçâćńòíè ïđèíòćđè"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Standalone Tools"
+msgstr "Êîíçîëíè èíńòđóìćíòè"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "and one unknown printer"
-msgstr "è ćäèí íćèçâćńòćí ïđèíòćđ"
+msgid "Where"
+msgstr "Êúäć"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Checking your system..."
-msgstr "Ïđîâćđêà íà âàűàòà ńèńòćìà..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Restarting CUPS..."
-msgstr "Đćńòàđòèđà XFS"
+msgid "but not matching"
+msgstr "íî íć ńúâïàäà"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
msgstr ""
+"Òóê ìîæć äà èçáćđćòć àëòćđíàòèâćí äđàéâćđ (OSS èëè ALSA) çà âàűàòà çâóêîâà "
+"êàđòà (%s)."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr "Ïđèìćđè íà ïđàâèëíè IP:\n"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Âńèśêî ïđàâèëíî ëè ć ?"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Server IP missing!"
-msgstr "Ëèïńâà èìć íà NCP ńúđâúđ !"
+msgid "Configuring PCMCIA cards..."
+msgstr "Íàńòđîéêà íà PCMCIA êàđòèòć ..."
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr ""
+msgid "kdesu missing"
+msgstr "ëèïńâà kdesu"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Ïđèíòćđ íà îòäàëćśćí CUPS ńúđâúđ"
+msgid "Encryption key"
+msgstr "Êëțś çà êđèïòèđàíć"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected server"
-msgstr "Èçòđèâàíć íà îïàűêàòà"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Edit selected server"
-msgstr "çàńćśćíà %s"
+#: ../../lang.pm:1
+#, c-format
+msgid "Christmas Island"
+msgstr "Êîëćäíè Îńòđîâè"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Add server"
-msgstr "Äîáàâè ïîòđćáèòćë"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr "Èíńòàëàöèÿòà íà bootloader ïđîâàëćíà. Ïîÿâè ńć ńëćäíàòà ăđćűêà:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
+msgid "EIDE/SCSI channel"
+msgstr "EIDE/SCSI êàíàë"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "IP address of host/network:"
-msgstr "IP àäđćń íà őîńò/ìđćæà:"
+msgid "Set this printer as the default"
+msgstr "Îïđćäćëè òîçè ïđèíòćđ çà ïîëçâàíć ïî ïîäđàçáèđàíć"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
-"Òîçè àäđćń/őîńò âćść ć â ńïèńúêà, òîé íć ìîæć äà áúäć äîáàâćí îòíîâî.\n"
+msgid "partition %s"
+msgstr "äÿë %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr "Âúâćäćíèÿò őîńò/ìđćæà IP íć ć ïđàâèëćí.\n"
+msgid "Paranoid"
+msgstr "Ïàđàíîèśíî"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Host/network IP address missing."
-msgstr ""
+msgid "NIS"
+msgstr "NIS"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr "Èçáîđ íà ìđćæà èëè őîńò çà êîéòî ëîêàëíèÿò ïđèíòćđ ùć áúäć đàçđćűćí:"
+msgid "<-- Del User"
+msgstr "<-- Èçòđèâà ïîòđćáèòćë"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Sharing of local printers"
-msgstr "Ïîäćëÿíć íà ëîêàëíè ïđèíòćđè"
+msgid "Location on the bus"
+msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove selected host/network"
-msgstr "Èçòđèâàíć íà èçáđàí őîńò/ìđćæà"
+msgid "No printer found!"
+msgstr "Íÿìà íàìćđćí ïđèíòćđ!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Edit selected host/network"
-msgstr "Đćäàêòèđàíć íà èçáđàí őîńò/ìđćæà"
+msgid "the vendor name of the device"
+msgstr "èìćòî íà ïđîèçâîäèòćëÿ íà óńòđîéńòâîòî"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Add host/network"
-msgstr "Äîáàâÿ őîńò/ìđćæà"
+msgid "Erase entire disk"
+msgstr "Èçòđèé öćëèÿ äèńê"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
-"Òîâà ńà ìàűèíèòć è ìđćæèòć çà êîèòî ëîêàëíî ńâúđçàíèòć ïđèíòćđè ùć áúäàò "
-"äîńòúïíè:"
+msgid " (Default)"
+msgstr " (Ïî ïîäđàçáèđàíć)"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "Àâòîìàòèśíà êîđćêöèÿ íà CUPS êîíôèăóđàöèÿ"
+msgid "Automatic reconfiguration"
+msgstr "Àâòîìàòèśíà đćêîíôèăóđàöèÿ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Japanese text printing mode"
-msgstr "Ïđîìÿíà ńèńòćìàòà çà ïćśàò"
+msgid "Receiving Speed:"
+msgstr "Ńêîđîńò íà ïîëóśàâàíć:"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
+msgid "Turks and Caicos Islands"
+msgstr "Òțđê è Êàéêîń Îńòđîâè"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "None"
-msgstr "Ăîòîâî"
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "permissions"
+msgstr "ïđàâà"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Additional CUPS servers: "
-msgstr "IP íà CUPS ńúđâúđà"
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "No remote machines"
-msgstr "Íÿìà îòäàëćśćíè ìàűèíè"
+msgid "<- Previous"
+msgstr "<- Ïđćäèűćí"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Custom configuration"
-msgstr "Ïîòđćáèòćëńêà íàńòđîéêà"
+msgid "Internet Connection Sharing configuration"
+msgstr "Íàńòđîéêà íà ńïîäćëÿíćòî íà Èíòćđíćò âđúçêàòà"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Ïđèíòćđ ïîäćëćí íà őńîòîâć/ìđćæè: "
+msgid "Toggle between flat and group sorted"
+msgstr "Ïđćâêëțśâàíć ìćæäó íîđìàëíî è ńîđòèđàíć ïî ăđóïè"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr "Àâòîìàòèśíî îòêđèâà íàëèśíèòć ïđèíòćđè íàîòäàëćśćíèòć ìàűèíè"
+msgid "Themes"
+msgstr "Òćìè"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr "Ïđèíòćđèòć íà òàçè ìàűèíà ń äîńòúïíè çà äđóăèòć êîìïțòđè"
+msgid "Options: %s"
+msgstr "Îïöèè: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
-"Âèć ńúùî đćűàâàòć, äàëè ïđèíòćđèòć íà îòäàëćśćíèòć ìàűèíè ùć áúäàò "
-"àâòîìàòèśíî äîńòúïíè íà òàçè ìàűèíà."
+"Â ìîìćíòà èçïîëçâàòć %s êàòî ïđîăđàìà çà ńòàđòèđàíć.\n"
+"Öúêíćòć íà Íàńòđîéêà, çà äà ńòàđòèđàòć óńòàíîâÿâàùèÿ ìàăüîńíèê."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
-msgstr ""
-"Òóê ìîæć äà đćűèòć äàëè ïđèíòćđèòć ńâúđçàíè êúì âàűàòà ìàűèíà ùć áúäàò "
-"äîńòúïíè îò îòäàëćśćíèòć ìàűèíè è îò êîé."
+msgid "OKI winprinter configuration"
+msgstr "Íàńòđîéêè íà OKI Winprinter"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "CUPS printer configuration"
-msgstr "Êîíôèăóđàöèÿ íà CUPS ïîäćëćí ïđèíòćđ"
+#: ../../lang.pm:1
+#, c-format
+msgid "Saint Helena"
+msgstr "Ńâćòà Ćëćíà"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
-msgstr "Àâòîìàòèśíî îòêđèâàíć íà ïđèíòćđ (Ëîêàëćí, TCP/Socket, è SMB ïđćíòćđè)"
+msgid "Security Level"
+msgstr "Íèâî íà çàùèòà"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
+"Some steps are not completed.\n"
"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
msgstr ""
+"Íÿêîè ćòàïè íć ńà çàâúđűćíè.\n"
"\n"
-"Îòäàëćśćíèòć íà CUPS ńúđâúđ ïđèíòćđè íć òđÿáâà äà íàńòđîéâàòć\n"
-"òóê; òćçè ïđèíòćđè ùć áúäàò çàńćśćíè àâòîìàòèśíî."
+"Íàèńòèíà ëè èńêàòć äà èçëćçćòć ńćăà ?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "How is the printer connected?"
-msgstr "Êàê ć ńâúđçàí ïđèíòćđúò ?"
+msgid "Sudan"
+msgstr "Ńóäàí"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Select Printer Connection"
-msgstr "Èçáćđćòć âđúçêà êúì ïđèíòćđà"
+msgid "Polish (qwertz layout)"
+msgstr "Ïîëńêà (QWERTZ íàđćäáà)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
+msgid "Syria"
+msgstr "Ńèđèÿ"
-#: ../../security/help.pm:1
+# NOTE: this message will be displayed at boot time; that is
+# only the ascii charset will be available on most machines
+# so use only 7bit for this message (and do transliteration or
+# leave it in English, as it is the best for your language)
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
#, c-format
msgid ""
-"Arguments: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
"\n"
-"Set the user umask."
-msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (val)\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
"\n"
-"Set the shell timeout. A value of zero means no timeout."
msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (size)\n"
+"Äîáđć äîűëè â %s - èçáèđàíć íà îïćđàöèîííà ńèńòćìà!\n"
+"\n"
+"Èçáćđćòć îïćđàöèîííàòà ńèńòćìà îò ăîđíèÿò ńïèńúê èëè èçśàêàéòć\n"
+"%d ńćêóíäè çà ïîäđàçáèđàùî ńòàđòèđàíć.\n"
"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr ""
+msgid "Portuguese"
+msgstr "Ïîđòóăàëńêà"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check open ports."
-msgstr "àêî ć çàäàäćíî äà, ïđîâćđÿâà îòâîđćíèòć ïîđòîâć"
+msgid "Loopback file name: "
+msgstr "Èìć íà loopback ôàéëà: "
-#: ../../security/help.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "DNS ńúđâúđà òđÿáâà äà áúäć âúâ ôîđìàò 1.2.3.4"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr "àêî ć çàäàćíî äà, èçïđàùà ïî ïîùàòà ńúîáùćíèć çà đćçóëòàòà."
+msgid "Serbia"
+msgstr "Ńđúáèÿ"
-#: ../../security/help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
+msgid "Newzealand"
msgstr ""
-"àêî ć çàäàćíî äà, ïđîâćđÿâà ôàéëîâćòć/äèđćêòîđèèòć äîńòúïíè çà ïèńàíć îò "
-"âńćêè."
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr "àêî ć çàäàćíî äà, èçïđàùà đćçóëòàòà îò ïđîâćđêàòà íà tty."
+msgid "This directory should remain within the root filesystem"
+msgstr "Òàçè äèđćêòîđèÿ òđÿáâà äà îńòàíć â đàìêèòć íà root ôàéëîâàòà ńèńòćìà."
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr ""
+msgid "CapsLock key"
+msgstr "CapsLock êëàâèű"
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
+msgid "Install bootloader"
+msgstr "Èíńòàëèđàíć íà bootloader"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr ""
+msgid "Select the memory size of your graphics card"
+msgstr "Èçáćđćòć êàïàöèòćò íà ïàìćòòà íà ăđàôèśíàòà ńè êàđòà"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr ""
+msgid "Dynamic IP Address Pool:"
+msgstr "Ïóë ń äèíàìèśćí IP àäđćń:"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr ""
+msgid "LVM name?"
+msgstr "LVM èìć ?"
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr ""
+msgid "Found %s %s interfaces"
+msgstr "Íàìćđćíè ńà %s %s èíòćđôćéńè"
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr ""
+msgid "sticky-bit"
+msgstr "sticky-áèò"
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Post Install"
+msgstr "Èíńòàëèđàé"
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, report unowned files."
-msgstr ""
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The internal domain name"
+msgstr "Íîâî èìć íà ïđèíòćđ"
-#: ../../security/help.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the root umask."
-msgstr ""
-"Àđăóìćíòè: (umask)\n"
-"\n"
-"Óńòàíîâÿâà çà root umask."
+msgid "Card IRQ"
+msgstr "IRQ íà êàđòàòà"
#: ../../security/help.pm:1
#, c-format
msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
+"Arguments: (umask)\n"
"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+"Set the user umask."
msgstr ""
-"Àđăóìćíòè: (length, ndigits=0, nupper=0)\n"
-"\n"
-"Çàäàâà çà ïàđîëàòà ìèíèìàëíàòà äúëæèíà, ìèíèìàëćí áđîé öèôđè è ìèíèìàëćí "
-"áđîé ăëàâíè áóêâè."
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
-msgstr ""
+msgid "logdrake"
+msgstr "ëîăäđćéê"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "Èçáćđćòć ôëîïè óńòđîéńòâî, êúäćòî äà íàïđàâèòć ńòàđòèđàùà äèńêćòà"
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-" Àêòèâèđà/Çàáđàíÿâà ćæćäíćâíà ïđîâćđêà çà çàùèòà"
+msgid "LILO with text menu"
+msgstr "LILO ń òćêńòîâî ìćíț"
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
-msgstr ""
+msgid "Everything (no firewall)"
+msgstr "Âńèśêî (áćç firewall)"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
-msgstr ""
+msgid "You must specify a kernel image"
+msgstr "Òđÿáâà äà çàäàäćòć îáàçà íà ÿäđîòî"
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
+msgid ", multi-function device on USB"
+msgstr ", ìíîăîôóíêöèîíàëíî óńòđîéńòâî íà USB"
-#: ../../security/help.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
-msgstr ""
+msgid "Do"
+msgstr "Íàïđàâè"
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "Ńâúđçâàíć ń îăëćäàëíèÿ ńúđâúđ çà ïîëóśàâàíć íà ńïèńúêà ń ïàêćòèòć"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
+msgid "Lithuanian AZERTY (old)"
+msgstr "Ëèòâèéńêà AZERTY (ńòàđà)"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
-msgstr ""
+msgid "Brazilian (ABNT-2)"
+msgstr "Áđàçèëńêà (ABNT-2)"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
-msgstr ""
+msgid "IP address of host/network:"
+msgstr "IP àäđćń íà őîńò/ìđćæà:"
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
+"ëćíòàòà çà ïđîăđćń y êîîđäèíàòè\n"
+"îò ăîđíèÿò ëÿâ úăúë"
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
-msgstr ""
+msgid "System installation"
+msgstr "Èíńòàëàöèÿ íà ńèńòćìà"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
-msgstr ""
+msgid "Saint Vincent and the Grenadines"
+msgstr "Ńâćòè Âèíńćíò è Ăđćíàäèí"
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
-msgstr ""
+msgid "/File/_Open"
+msgstr "/Ôàéë/_Îòâîđè"
#: ../../security/help.pm:1
#, c-format
@@ -12518,873 +12063,703 @@ msgid ""
"to the X server on the tcp port 6000 or not."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
-msgstr ""
+msgid "Location of auto_install.cfg file"
+msgstr "Ìćńòîïîëîæćíèć íà auto_install.cfg ôàéë"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
+msgid "Open Firmware Delay"
+msgstr "Èçśàêâàíć íà Open Firmware"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Ïîçâîëÿâà/Çàáđàíÿâà äèđćêòíî âëèçàíć íà root."
+msgid "Hungary"
+msgstr "Óíăàđèÿ"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Ïîçâîëÿâà/Çàáđàíÿâà îòäàëćśćíî âëèçàíć íà root."
+msgid "Total progess"
+msgstr "Îáù ïđîăđćń"
-#: ../../security/help.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Ïîçâîëÿâà/Çàáđàíÿâà ïđćńòàđòèđàíć îò ïîòđćáèòćë íà êîíçîëà."
+msgid "Color configuration"
+msgstr "Êîíôèăóđàöèÿ íà öâÿò"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
+msgid "New Zealand"
+msgstr "Íîâà Çćëàíäèÿ"
-#: ../../security/help.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Ïîçâîëÿâà/Çàáđàíÿâà àâòîìàòèśíî âëèçàíć."
+"Âćść èìà íÿêîé îăđàíèśćíèÿ, è ïîâćść àâòîìàòèśíè ïđîâćđêè ùć ńć èçïúëíÿâàò "
+"âńÿêà âćśćđ."
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Ïîçâîëÿâà/Çàáđàíÿâà icmp echo."
+msgid "please choose the date to restore"
+msgstr "ìîëÿ, èçáćđćòć äàòàòà çà âúçńòàíîâÿâàíć"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse broadcasted icmp echo."
+msgid "Switching from ext2 to ext3"
+msgstr "Ïđćőîä îò ext2 êúì ext3"
+
+#: ../../printer/data.pm:1
+#, c-format
+msgid "LPRng"
+msgstr "LPRng"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Netherlands Antilles"
+msgstr "Őîëàíäńêè Àíòèëè"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Browse to new restore repository."
msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Ïîçâîëÿâà/Çàáđàíÿâà broadcasted icmp echo."
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
"\n"
-"Accept/Refuse bogus IPv4 error messages."
-msgstr ""
-"Arguments: (arg)\n"
+"Welcome to the Printer Setup Wizard\n"
"\n"
-"Ïîçâîëÿâà/Çàáđàíÿâà ńúîáùćíèÿ çà IPv4 ăđćűêè."
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
+msgstr ""
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "Àäìèíèńòđàòîđ ïî ńèăóđíîńòòà (ëîăèí èëè Ćë.ïîùà)"
+msgid "and %d unknown printers"
+msgstr "è %d íćèçâćńòíè ïđèíòćđè"
-#: ../../security/level.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"A library which defends against buffer overflow and format string attacks."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
msgstr ""
-"Áèáëèîòćêà, êîÿòî îńèăóđÿâà çàùèòà îò aòàêè ń ïđćïúëâàíć íà áóôćđ è ôîđìàòíè "
-"ńòđèíăîâć."
-#: ../../security/level.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Use libsafe for servers"
-msgstr "Èçïîëçâàéòć libsafe çà ńúđâúđè"
+msgid "No ISDN PCI card found. Please select one on the next screen."
+msgstr "Íć ć íàìćđćíà ISDN PCI êàđòà. Ìîëÿ èçáćđćòć îò ńëćäâàùèÿò ćêđàí."
-#: ../../security/level.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Security level"
-msgstr "Íèâî íà ńèăóđíîńò"
+msgid "GB"
+msgstr "ĂÁ"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Please choose the desired security level"
-msgstr "Ìîëÿ, èçáćđćòć íèâî íà ńèăóđíîńò"
+msgid "Please give a user name"
+msgstr "Ìîëÿ, çàäàéòć ïîòđćáèòćëńêî èìć"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "DrakSec Basic Options"
-msgstr "Îńíîâíè îïöèè íà DrakSec "
+msgid "Enable CD Boot?"
+msgstr "Ńòàđòèđàíć îò CD ?"
-#: ../../security/level.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
+msgid " enter `void' for void entry"
msgstr ""
-"Ïîäîáíî íà ïđćäèűíîòî íèâî, íî ńèńòćìàòà ć íàïúëíî çàòâîđćíà.\n"
-"Íèâîòî íà ńèăóđíîńò ć íà ìàêńèìóìà ńè."
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
+msgid "on Hard Drive"
msgstr ""
-"Ń òîâà íèâî íà ńèăóđíîńò, ïîëçâàíćòî íà ńèńòćìàòà êàòî ńúđâúđ ńòàâà "
-"âúçìîæíî.\n"
-"Ńèăóđíîńòòà ńćăà ć äîńòàòúśíî ăîëÿìà äà ńć èçïîëçâà ńèńòćìàòà êàòî\n"
-"ńúđâúđ ïđèćìàù âđúçêè îò ìíîăî êëèćíòè. "
-#: ../../security/level.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Âćść èìà íÿêîé îăđàíèśćíèÿ, è ïîâćść àâòîìàòèśíè ïđîâćđêè ùć ńć èçïúëíÿâàò "
-"âńÿêà âćśćđ."
+msgid "Winmodem connection"
+msgstr "Winmodem âđúçêà"
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
+"\n"
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
msgstr ""
-"Òîâà ć ńòàíäàđòíàòà ńèăóđíîńò ïđćïîđúśèòćëíà çà êîìïțòúđ, êîéòî ùć áúäć "
-"èçïîëçâàí äà ńć ńâúđçâà êúì Èíòćđíćò êàòî êëèćíò."
-#: ../../security/level.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
+"Arguments: (arg)\n"
+"\n"
+"Set the password history length to prevent password reuse."
msgstr ""
-"Ïàđîëàòà ńćăà ć âêëțśćíà, íî èçïîëçâàíćòî êàòî ìđćæîâ êîìïțòúđ íć ć "
-"ïđćïîđúśèòćëíî."
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
+msgid "Now, you can run xawtv (under X Window!) !\n"
msgstr ""
-"Òîâà íèâî ńć èçïîëçâà ń âíèìàíèć. Òîâà êàđà ńèńòćìàòà âè ïî-ëćńíà çà\n"
-"óïîòđćáà, íî ć ïî-śóâńòâèòćëíî: íć òđÿáâà äà áúäć èçïîëçâàíà íà ìàűèíè\n"
-"ńâúđçàíè ń äđóăè èëè ïî Èíòćđíćò. Íÿìà äîńòúï ń ïàđîëè."
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Paranoid"
-msgstr "Ïàđàíîèśíî"
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr ""
+"Íÿìà äîńòàòúśíî swap çà ïđèêëțśâàíć íà èíńòàëàöèÿòà, ìîëÿ äîáàâćòć ìàëêî"
-#: ../../security/level.pm:1
-#, c-format
-msgid "Higher"
-msgstr "Ïî-âèńîêî"
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "%s on %s"
+msgstr "Ïîđò"
-#: ../../security/level.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "High"
-msgstr "Âèńîêî"
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Poor"
-msgstr "Ëîűî"
+msgid "Which is your timezone?"
+msgstr "Êîÿ ć âđćìćâàòà âè çîíà ?"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Welcome To Crackers"
-msgstr "Äîáđć äîűëè ïđè Cracker-èòć"
+msgid "Guinea"
+msgstr "Ăâèíćÿ"
-#: ../../standalone/XFdrake:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Ìîëÿ âëćçòć îòíîâî â %s, çà äà àêòèâèđàòć ïđîìćíèòć"
+msgid "The system is now connected to the Internet."
+msgstr "Ńèńòćìàòà â ìîìćíòà ć ńâúđçàíà êúì Èíòćđíćò."
-#: ../../standalone/XFdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Ìîëÿ èçëćçòć îò ńćńèÿòà è èçïîëçâàéòć Ctrl-Alt-BackSpace"
+msgid "South Georgia and the South Sandwich Islands"
+msgstr "Țæíè Ńàíäâèśćâè Îńòđîâè è Țæíà Äæîđäæèÿ"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgid "Japan (broadcast)"
msgstr ""
-"/etc/hosts.allow è /etc/hosts.deny âćść ńà êîíôèăóđèđàíè - íć ńà ïđîìćíćíè"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "Òđÿáâà äà ńúçäàäćòć ïúđâî /etc/dhcpd.conf!"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "Íćùî áćűć ăđćűíî! - Äàëè mkisofs ć èíńòàëèđàí?"
+msgid "Mozambique"
+msgstr "Ìîçàìáèê"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr ""
+msgid "Icon"
+msgstr "Èêîíà"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No floppy drive available!"
-msgstr "Íÿìà ôëîïè óńòđîéńòâî!"
+msgid "Please choose what you want to backup"
+msgstr "Ìîëÿ èçáćđćòć êàêâî èńêàòć äà çàïàçèòć"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Floppy can be removed now"
-msgstr "Ôëîïèòî ìîæć äà áúäć èçâàäćíî ńćăà"
+msgid "256 colors (8 bits)"
+msgstr "256 öâÿòà (8 áèòà)"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "Couldn't access the floppy!"
-msgstr "Íÿìàì äîńòúï äî ôëîïè!"
+msgid "Read-write"
+msgstr "Śćòćíć-çàïèń"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please insert floppy disk:"
-msgstr "Ńëîæćòć ôëîïè äèńêćòà:"
+msgid "Size: %s\n"
+msgstr "Đàçìćđ: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Write Config"
-msgstr "Çàïèńâà íàńòđîéêà"
+msgid "Hostname: "
+msgstr "Èìć íà őîńò:"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr "Ïóë ń äèíàìèśćí IP àäđćń:"
+msgid "Chunk size %s\n"
+msgstr "Đàçìćđ íà ïàđśćòî %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
+msgid "Build the future of Linux!"
msgstr ""
-"Ïîâćśćòî îò òćçè ńòîéíîńòè ńà èçâëćśćíè\n"
-"îò âàűàòà đàáîòćùà ńèńòćìà.\n"
-"Âèć ìîæć äà ăè ïđîìćíèòć ïđè íćîáőîäèìîńò."
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "Êîíôèăóđèđàíć íà dhcpd ńúđâúđ"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "IP Range End:"
-msgstr "Êđàé íà IP îáőâàò:"
-
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "IP Range Start:"
-msgstr "Íàśàëî íà IP îáőâàò:"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Name Servers:"
-msgstr "NIS ńúđâúđ"
+msgid "Local Printer"
+msgstr "Ëîêàëćí ïđèíòćđ"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Domain Name:"
-msgstr "Èìć íà äîìćéíà:"
+msgid ""
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
+msgstr ""
+" Àâòîđńêè ïđàâà (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s"
+"\\@epita.fr>"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Broadcast Address:"
-msgstr "Broadcast àäđćń:"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Subnet Mask:"
-msgstr "Ìàńêà íà ïîäìđćæà:"
+msgid "ADSL connection"
+msgstr "ADSL âđúçêà"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Routers:"
-msgstr "Đóòćđè:"
+msgid "No configuration, please click Wizard or Advanced.\n"
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Netmask:"
-msgstr "Ìđćæîâà ìàńêà:"
+msgid "Error!"
+msgstr "Ăđćűêà !"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Subnet:"
-msgstr "Ïîäìđćæà:"
+msgid "cable connection detected"
+msgstr "çàńćśćíà ć êàáćëíà âđúçêà"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
+msgid "Permission denied transferring %s to %s"
msgstr ""
-"Òđÿáâà äà ïđćńòàđòèđàòć Ìćíèäæúà íà Äèńïëćé çà äà èìàò ćôćêò ïđîìćíèòć. \n"
-"(îáńëóæâàíć dm restart - îò êîíçîëàđà)"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "dhcpd Config..."
-msgstr "Íàńòđîéêà íà dhcpd..."
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Delete Client"
-msgstr "Èçòđèâà êëèćíò"
+msgid "/_Report Bug"
+msgstr "/_Èíôîđìèđàé çà áúă"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "<-- Edit Client"
-msgstr "<-- Đćäàêòèđà êëèćíò"
+msgid "Resize"
+msgstr "Ïđîìćíè ăîëćìèíàòà"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add Client -->"
-msgstr "Äîáàâÿ êëèćíò -->"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Allow Thin Clients"
-msgstr "DHCP êëèćíò"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Thin Client"
-msgstr "DHCP êëèćíò"
+msgid "Dominica"
+msgstr "Äîìèíèêà"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No net boot images created!"
+msgid "Please enter the device name to use for backup"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "type: %s"
-msgstr "òèï: %s"
-
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "<-- Del User"
-msgstr "<-- Èçòđèâà ïîòđćáèòćë"
+msgid "Resolution: %s\n"
+msgstr "Đàçäćëèòćëíà ńïîńîáíîńò: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Add User -->"
-msgstr "Äîáàâÿ ïîòđćáèòćë -->"
+msgid "matching"
+msgstr "ńúâïàäćíèć"
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
#, c-format
msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
msgstr ""
+"Íÿìàì äîńòúï äà ìîäóëèòć íà ÿäđîòî ńúîòâćòńòâàùè íà âàűèÿò (ôàéë %s ëèïńâà), "
+"òîâà îçíàśàâà, ść âàűćòî ôëîïè íć ć ńèíőđîíèçèđàíî ń èíńòàëàöèîííèÿò íîńèòćë "
+"(ìîëÿ íàïđàâćòć íîâî boot ôëîïè)"
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Delete All NBIs"
-msgstr "Èçòđèâà âńèśêè NBI"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "<-- Delete"
-msgstr "<-- Èçòđèâà"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "This will take a few minutes."
-msgstr "Òîâà ùć îòíćìć íÿêîëêî ìèíóòè."
-
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
-msgid "Build All Kernels -->"
-msgstr "Ïîńòđîÿâà âńèśêè ÿäđà -->"
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"Ìîëÿ, èçáćđćòć âćđíèÿ ïîđò. Íàïđèìćđ, ïîđòúò COM1 ïîä Windows ïîä GNU/Linux\n"
+"ńć íàđèśà ttyS0."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "No NIC selected!"
-msgstr "Íÿìà NIC èçáđàí!"
+msgid "The following packages are going to be removed"
+msgstr "Ńëćäíèòć ïàêćòè ùć áúäàò ïđćìàőíàòè"
-#: ../../standalone/drakTermServ:1
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
#, c-format
-msgid "Build Single NIC -->"
-msgstr "Ïîńòđîÿâà ćäèíèśćí NIC -->"
+msgid "Connect to the Internet"
+msgstr "Ńâúđæè ńć êúì Èíòćđíćò"
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "No kernel selected!"
-msgstr "Íÿìà èçáđàíî ÿäđî!"
+msgid "Use existing partitions"
+msgstr "Èçïîçâàíć íà ńúùćńòâóâàù äÿë"
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Build Whole Kernel -->"
-msgstr "Ïîńòđîÿâà öÿëîòî ÿäđî -->"
+msgid "Canadian (Quebec)"
+msgstr "Êàíàäńêà (Êâćáćê)"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Boot ISO"
-msgstr ""
+msgid "Mouse device: %s\n"
+msgstr "Óńòđîéńòâî íà ìèűêàòà: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Boot Floppy"
+msgid "Reselect correct fonts"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
+"Options Description:\n"
"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
-"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
"\n"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"Options\n"
"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
-"\n"
-"\n"
-" Áëàăîäàđíîńòè:\n"
-"\t- LTSP Ïđîćêò http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+"Íàêđàÿ, ùć áúäćòć ïîïèòàíè äàëè èńêàòć äà âèæäàòć ăđàôèśíèÿ èíòćđôćéń ïđè\n"
+"çàđćæäàíć. Îòáćëćæćòć, ść òîçè âúïđîń ùć âè áúäć çàäàäćí äàæć àêî èçáćđćòć,\n"
+"äà íć òćńòâàòć íàńòđîéêàòà. Îśćâèäíî, áèőòć îòăîâîđèëè ń \"Íć\", àêî "
+"ìàűèíàòà\n"
+"ùć đàáîòè êàòî ńúđâúđ èëè àêî íÿìà óńïćűíî íàńòđîćí äèńïëćé."
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "We are now going to configure the %s connection."
+msgstr "Ńćăà ùć íàńòđîèì %s âđúçêàòà."
+
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#, c-format
+msgid "MandrakeExpert Corporate"
+msgstr "MandrakeExpert îáćäèíÿâà"
+
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
msgstr ""
-"\n"
-" Àâòîđńêè ïđàâà (C) 2002 îò MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Write protection"
+msgstr "Àâòîìàòèśíî îòêđèâà ïđèíòćđ"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "You've not selected any font"
+msgstr "Èçòđèâàíć íà îïàűêàòà"
+
+#: ../../steps.pm:1
#, c-format
-msgid "Add/Del Clients"
-msgstr "Äîáàâÿ/Èçòđèâà êëèćíòè"
+msgid "Language"
+msgstr "Èçáîđ íà ćçèê"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Add/Del Users"
-msgstr "Äîáàâÿ/Èçòđèâà ïîòđćáèòćëè"
+msgid "Printer model selection"
+msgstr "Èçáîđ ìîäćë íà ïđèíòćđà"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Net Boot Images"
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
msgstr ""
+"Ńëćä ïđîìÿíà íà òèïà íà äÿëà %s, âńèśêè äàííè âúđőó íćăî ùć áúäàò çàăóáćíè"
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr ""
+msgid "%d seconds"
+msgstr "%d ńćêóíäè"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Stop Server"
-msgstr "Ńïèđà ńúđâúđ"
+msgid "Insert a blank floppy in drive %s"
+msgstr "Ńëîæćòć ïđàçíà äèńêćòà â óńòđîéńòâî %s"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Start Server"
-msgstr "Ńòàđòèđà ńúđâúđ"
+msgid "A valid URI must be entered!"
+msgstr "Òđÿáâà äà áúäć âúâćäćí âàëèäćí URI!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Disable Server"
-msgstr "Èçêëțśâà Ńúđâúđ"
+msgid "Found \"%s\" interface do you want to use it ?"
+msgstr "Íàìćđćí ć \"%s\" èíòćđôćéń. Èńêàòć ëè äà ăî èçïîëçâàòć?"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Enable Server"
-msgstr "Âêëțśâà Ńúđâúđ"
+msgid "Re-configure interface and DHCP server"
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "Êîíôèăóđàöèÿ íà Òćđìèíàëćí Ńúđâúđ â Mandrake "
+msgid "Sound configuration"
+msgstr "Íàńòđîéêà çà çâóê"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove the last item"
-msgstr "Èçòđèâà ïîńëćäíèÿò îáćêò"
+msgid "Photo test page"
+msgstr "Òćńòîâà ńòđàíèöà ńúń ńíèìêà"
-#: ../../standalone/drakautoinst:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Add an item"
-msgstr "Äîáàâÿíć íà îáćêò"
+msgid "Custom disk partitioning"
+msgstr "Êëèćíòńêî đàçäćëÿíć íà äèńêà"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Auto Install"
-msgstr "Àâòîìàòèśíî Èíńòàëèđà"
+msgid "Enter Printer Name and Comments"
+msgstr "Âúâćäćòć èìć íà ïđèíòćđ è êîìćíòàđ"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
+"The following printers\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
-"Äèńêćòàòà ć óńïćűíî ńúçäàäćíà.\n"
-"Ńćăà ìîæćòć äà ïđćèăđàćòć èíńòàëàöèÿòà."
+"Ńëćäíèòć ïđèíòćđè\n"
+"\n"
+"%s%s\n"
+"ńà äèđćêòíî ńâúđçàíè êúì âàűàòà ńèńòćìà"
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Congratulations!"
-msgstr "Ïîçäđàâëćíèÿ !"
+msgid "type: %s"
+msgstr "òèï: %s"
-#: ../../standalone/drakautoinst:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Äîáđć äîűëè.\n"
-"\n"
-"Ïàđàìćòđèòć çà àâòîèíńòàëàöèÿ ńà íàëèśíè â ńćêöèÿòà â ëÿâî"
+msgid "Slovakian (QWERTY)"
+msgstr "Ńëîâàűêà (QWERTY)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Creating auto install floppy"
-msgstr "Ïîäăîòâÿì äèńêćòà ń àâòîìàòèśíà èíńòàëàöèÿ"
+msgid "No Sound Card detected!"
+msgstr "Íÿìà íàìćđćíà çâóêîâà êàđòà!"
-#: ../../standalone/drakautoinst:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "manual"
-msgstr "đúśíî"
+msgid "Mouse Port"
+msgstr "Ïîđò íà ìèűêàòà"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
msgstr ""
-"Ìîëÿ, èçáćđćòć çà âńÿêà ńòúïêà, äàëè ùć ńć ïđćèăđàć êàòî ïđè èíńòàëàöèÿòà, "
-"èëè ùć áúäć đúśíà"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Íàńòđîéêà íà àâòîìàòèśíèòć ńòúïêè"
+"Òđÿáâà äà ïđćńòàđòèđàòć Ìćíèäæúà íà Äèńïëćé çà äà èìàò ćôćêò ïđîìćíèòć. \n"
+"(îáńëóæâàíć dm restart - îò êîíçîëàđà)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "replay"
-msgstr "ïîâòîđè"
+msgid "Ftp Server"
+msgstr "Ftp Ńúđâúđ"
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+"Arguments: (arg)\n"
"\n"
-"Do you want to continue?"
+"Enable/Disable msec hourly security check."
msgstr ""
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Auto Install Configurator"
-msgstr "Íàńòđîéśèê íà àâòîìàòèśíà èńíòàëàöèÿ"
+msgid "%s fonts conversion"
+msgstr ""
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Íć ìîăà äà íàìćđÿ íóæíà êàđòèíêà `%s'."
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the type of bus on which the mouse is connected"
+msgstr "Ìîëÿ, èçáćđćòć òèïà íà űèíàòà êúì êîÿòî ć ńâúđçàíà ìèűêàòà âè."
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
#, c-format
-msgid "Error!"
-msgstr "Ăđćűêà !"
+msgid "Uganda"
+msgstr "Óăàíäà"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (size)\n"
"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
+"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"options description:\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
+"\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
+"\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
+"\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
"\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
+"\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
+"\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
+"\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
+"\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
+"\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
+"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
+"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
+"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Comoros"
+msgstr "Êîìîđè"
+
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Description:\n"
"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
+"We are now going to configure the %s connection.\n"
"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"Press OK to continue."
+msgstr ""
+"\n"
"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
"\n"
+"Ńćăà ùć íàńòđîèì %s âđúçêàòà.\n"
"\n"
+"Íàòèńíćòć OK, çà äà ïđîäúëæèòć."
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Yaboot mode"
+msgstr "Đćæèì íà Yaboot"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
-" îáíîâÿâàíèÿ 2002 MandrakeSoft îò Stew Benedict <sbenedict\\@mandrakesoft."
-"com>"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Îáèêíîâćííà 3-áóòîííà ìèűêà"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
-msgstr ""
-" Àâòîđńêè ïđàâà (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s"
-"\\@epita.fr>"
+msgid "Select another media to restore from"
+msgstr "Èçáćđćòć äđóă íîńèòćë çà âúçńòàíîâÿâàíć îò íćăî"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Software Manager"
+msgstr "Ńîôòóćđćí ìćíèäæúđ"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"restore description:\n"
+"Restore Description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
@@ -13396,4663 +12771,5362 @@ msgid ""
"\n"
" - Incremental Backups:\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
+msgid "Re-submit"
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
+msgid "CD in place - continue."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
+msgid "KB"
+msgstr "ÊÁ"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Network & Internet"
+msgstr "Ìđćæîâ èíòćđôćéń"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "Drakbackup"
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Ëèòâèéńêà \"ôîíćòèśćí\" QWERTY"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Net Boot Images"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Sharing of local scanners"
+msgstr "Ëîêàëćí ïđèíòćđ"
+
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Restore"
-msgstr "Âúçńòàíîâÿâà"
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr "Ïđîáà çà Plug & Play ć íćóńïćűíà. Ìîëÿ, èçáćđćòć ïđàâèëćí ìîíèòîđ"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Backup Now"
-msgstr "Đćçćđâíî êîïèć ńćăà"
+msgid "Services and deamons"
+msgstr "Óńëóèăè è äćìîíè"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Advanced Configuration"
-msgstr "Äîïúëíèòćëíà êîíôèăóđàöèÿ"
+msgid "Remote host name missing!"
+msgstr "Ëèïńâà èìć íà èìć íà őîńò !"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Wizard Configuration"
-msgstr "Êîíôèăóđàöèÿ íà Ìàăüîńíèê"
+msgid "with /usr"
+msgstr "ń /usr"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "View Backup Configuration."
-msgstr "Ïđćăëćä íà Êîíôèăóđàöèÿ çà đćçćđâíî êîïèć."
+msgid "Network"
+msgstr "Ìđćæà"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Now from configuration file"
-msgstr "Íàńòđîéêà íà ìđćæàòà"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgstr ""
+"Àâòîìàòèśíî îòêđèâà ïđèíòćđè ńâúđçàíè ń ìàűèíè đàáîòćùè ïîä Microsoft Windows"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Drakbackup Configuration"
-msgstr "Drakbackup Êîíôèăóđàöèÿ"
+msgid "This password is too simple"
+msgstr "Òàçè ïàđîëà ć ïđćêàëćíî ïđîńòà"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Total Progress"
-msgstr ""
+msgid "Slovakian (QWERTZ)"
+msgstr "Ńëîâàűêà (QWERTZ)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "Sending files..."
-msgstr "Èçïđàùàì ôàéëîâć..."
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "files sending by FTP"
-msgstr "ôàéëîâć èçïđàòćíè ïî FTP"
+msgid "Truly minimal install (especially no urpmi)"
+msgstr "Íàèńòèíà ìèíèìàëíà èíńòàëàöèÿ (îńîáćííî áćç urpmi)"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup other files"
-msgstr "Đćçćđâíî êîïèć íà äđóăè ôàéëîâć"
+msgid ""
+" Transfer \n"
+"Now"
+msgstr ""
+" Ïđćőâúđëÿ \n"
+"Ńćăà"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup user files"
-msgstr "Đćçćđâíî êîïèć íà ïîòđćáèòćëńêè ôàéëîâć"
+msgid "Use daemon"
+msgstr "Èçïîëçâà äćìîí"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
#, c-format
-msgid "Backup system files"
-msgstr "Đćçćđâíî êîïèć íà ńèńòćìíè ôàéëîâć"
+msgid "Authentication"
+msgstr "Èäćíòèôèêàöèÿ"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Under Devel ... please wait."
-msgstr ""
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Äîáàâÿ òîçè ïđèíòćđ íà Star Office/OpenOffice.org/GIMP"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Additional CUPS servers: "
+msgstr "IP íà CUPS ńúđâúđà"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
+"Èçáćđćòć ćäèí îò àâòîìàòèśíî îòêđèòèòć ïđèíòćđè â ńïèńúêà ăîđć èëè âúâćäćòć "
+"èìć íà őîńò èëè IP è îïöèîíàëíî íîìćđ íà ïîđò (ïîäđàçáèđàù 9100) â ïîëćòî."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please select data to backup..."
-msgstr "Ìîëÿ, èçáćđćòć äàííè çà đćçćđâíî êîïèć..."
+msgid "Where do you want to mount %s?"
+msgstr "Êúäć èńêàòć äà ìîíòèđàòć óńòđîéńòâî %s ?"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please select media for backup..."
-msgstr "Ìîëÿ, èçáćđćòć íîńèòćë çà âúçńòàíîâÿâàíć..."
+msgid "Restore Via Network"
+msgstr "Âúçńòàíîâÿâà ïđćç ìđćæà"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please select data to restore..."
-msgstr "Ìîëÿ, èçáćđćòć äàííè çà âúçńòàíîâÿâàíć..."
+msgid "Algeria"
+msgstr "Àëæèđ"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Ńëćäíèòć ïàêćòè ùć òđÿáâà äà ńć èíńòàëèđàò:\n"
+msgid "Initrd-size"
+msgstr "Initrd-ăîëćìèíà"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
+msgid "\tBackups use tar and gzip\n"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Next"
-msgstr "Ńëćäâàù"
-
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Previous"
-msgstr "Ïđćäèűćí"
+msgid "2 MB"
+msgstr "2 ÌÁ"
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Save"
-msgstr "Çàïàçâà"
+msgid ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Build Backup"
-msgstr "Ëîű backup-ôàéë"
+msgid "Setting Default Printer..."
+msgstr "Ïđèíòćđ ïî ïîäđàçáèđàíć"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Restore Progress"
-msgstr "Ïđîăđćń íà âúçńòàíîâÿâàíć"
+msgid "Interface %s (using module %s)"
+msgstr "Èíòćđôćéń %s (èçïîëçâàù ìîäóë %s)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Restore From Catalog"
-msgstr "Âúçńòàíîâÿâà îò êàòàëîă"
+msgid "Name: %s\n"
+msgstr "Èìć: %s\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Browse to new restore repository."
-msgstr ""
+msgid "Generating preview ..."
+msgstr "Ăćíćđèđàì ïđćăëćä..."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "CD in place - continue."
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Custom Restore"
-msgstr "Êëèćíòńêà"
+#: ../../mouse.pm:1
+#, c-format
+msgid "serial"
+msgstr "ńćđèéíà"
-#: ../../standalone/drakbackup:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Restore all backups"
-msgstr ""
+msgid "DVD-ROM"
+msgstr "DVD-ROM"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Failed..."
-msgstr "Âúçńòàíîâÿâàíćòî ïđîïàäíà..."
+msgid "Georgian (\"Latin\" layout)"
+msgstr "Ăđóçèíńêà (\"Ëàòèíńêà\" íàđćäáà)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Files Restored..."
+msgid "Get the best items with Mandrake Linux Strategic partners"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Path or Module required"
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Hostname required"
-msgstr "Èçèńêâà èìć íà ìàűèíà"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Username required"
-msgstr "Èçèńêâà ïîòđćáèòćëńêî èìć"
+msgid "Kenya"
+msgstr "Êćíèÿ"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Password required"
-msgstr "Èçèńêâà ïàđîëà"
+msgid "Use ``Unmount'' first"
+msgstr "Ïúđâî èçïîëçâàéòć 'Äćìîíòèđàíć'"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Host Path or Module"
-msgstr ""
+msgid "Installing mtools packages..."
+msgstr "Èíńòàëèđàíć íà mtools ïàêćòè..."
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Host Name"
-msgstr "Èìć íà őîńò"
+msgid "You must specify a root partition"
+msgstr "Òđÿáâà äà çàäàäćòć êîđćíîâèÿò äÿë"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr ""
+msgid "first step creation"
+msgstr "ïúđâà ńòúïêà íà ńúçäàâàíć"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Via Network"
-msgstr "Âúçńòàíîâÿâà ïđćç ìđćæà"
+msgid "Both Shift keys simultaneously"
+msgstr "Äâàòà Shift êëàâèűà ćäíîâđćìćííî"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr ""
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Select a scanner model"
+msgstr "Èçáćđćòć ăđàôèśíà êàđòà"
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
+msgid "LPRng - LPR New Generation"
+msgstr "LPRng - LPR Íîâî ïîêîëćíèć"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore From Tape"
-msgstr "Âúçńòàíîâÿâà îò ëćíòà"
+msgid "Drakbackup Configuration"
+msgstr "Drakbackup Êîíôèăóđàöèÿ"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr ""
+msgid "Save as.."
+msgstr "Çàïàçè êàòî..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore From CD"
-msgstr "Âúçńòàíîâÿâà îò CD"
+msgid "Korea (North)"
+msgstr "Êîđćÿ (Ńćâćđíà)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup files not found at %s."
-msgstr ""
+msgid "Autologin"
+msgstr "Àâòîìàòèśíî âëèçà"
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Change\n"
-"Restore Path"
-msgstr ""
-"Ïđîìÿíà\n"
-"ïúòÿ íà âúçńòàíîâÿâàíć"
+msgid "System configuration"
+msgstr "Êîíôèăóđàöèÿ íà ńèńòćìà"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
+msgid "Domain Admin Password"
+msgstr "Ïàđîëà çà àäìèíèńòđàòîđ íà äîìćéí"
+
+#: ../../share/advertising/05-desktop.pl:1
+#, fuzzy, c-format
msgid ""
-"Restore Selected\n"
-"Files"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
msgstr ""
-"Âúçńòàíîâÿâà èçáđàíèòć\n"
-"ôàéëîâć"
+"Mandrake Linux 9.1 âè ïđćäîńòàâÿ 11 ïîòđćáèòćëńêè èíòćđôćéńà êîèòî ìîăàò äà "
+"áúäàò íàïúëíî ìîäèôèöèđàíè: KDE 3, Gnome 2, WindowMaker, ..."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Configuring printer ..."
+msgstr "Íàńòđîéêà íà ïđèíòćđà \"%s\" ..."
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Remove user directories before restore."
-msgstr ""
+msgid "MB"
+msgstr "ÌÁ"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
+msgid "if set to yes, run some checks against the rpm database."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "select path to restore (instead of /)"
-msgstr "èçáîđ íà ïúò çà âúçńòàíîâÿâàíć (âìćńòî /)"
+msgid "Virgin Islands (British)"
+msgstr "Âèđäæèíńêè Îńòđîâè (Áđèòàíńêè)"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore Other"
-msgstr "Âúçńòàíîâè äđóăè"
+msgid "Bermuda"
+msgstr "Áćđìóäà"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Restore Users"
-msgstr "Âúçńòàíîâè Ïîòđćáèòćëè"
+msgid "click here if you are sure."
+msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore system"
-msgstr "Ńèńòćìà çà âúçńòàíîâÿâàíć"
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"Ïî-ăîđć ńà èçáđîćíè çàńćśćíèòć Linux äÿëîâć ńúùćńòâóâàùè\n"
+"íà òâúđäèÿ âè äèńê. Ìîæćòć äà çàïàçèòć èçáîđà íàïđàâćí îò ìàăüîńíèêà, òć ńà\n"
+"äîáđè çà îáùà óïîòđćáà. Àêî ăè ïđîìćíèòć, òđÿáâà äà ïîíć äà îïđćäćëèòć\n"
+"root äÿë (\"/\"). Íć èçáèđàéòć ïđćêàëćíî ìàëêè äÿëîâć, çàùîòî íÿìà äà "
+"ìîæćòć\n"
+"äà èíńòàëèđàòć äîńòàòúśíî ńîôòóćđ. Àêî èńêàòć äà ńúőđàíÿâàòć äàííèòć ńè íà\n"
+"îòäćëćí äÿë, òđÿáâà äà èçáćđćòć \"/home\" (âúçìîæíî ć ńàìî, àêî èìàòć "
+"ïîâćść\n"
+"îò ćäèí Linux äÿë).\n"
+"\n"
+"\n"
+"Çà èíôîđìàöèÿ, âńćêè äÿë ć ïîêàçàí, êàêòî ńëćäâà: \"Èìć\", \"Êàïàöèòćò\".\n"
+"\n"
+"\n"
+"\"Èìćòî\" ńć êîäèđà êàêòî ńëćäâà: \"òèï íà äèńêà\", \"íîìćđ íà äèńêà\",\n"
+"\"íîìćđ íà äÿë\" (íàïđèìćđ, \"hda1\").\n"
+"\n"
+"\n"
+"\"Òèïúò íà äèńêà\" ìîæć äà ć \"hd\", àêî ć IDE òâúđä äèńê, èëè \"sd\", àêî "
+"ć\n"
+"SCSI òâúđä äèńê.\n"
+"\n"
+"\n"
+"\"Íîìćđúò íà äèńêà\" âèíàăè ć áóêâàòà ńëćä \"hd\" èëè \"sd\". Ïđè IDE "
+"äèńêîâć:\n"
+"\n"
+" * \"a\" îçíàśàâà \"master äèńê íà ïúđâèÿ IDE êîíòđîëćđ\",\n"
+" * \"b\" îçíàśàâà \"slave äèńê íà ïúđâèÿ IDE êîíòđîëćđ\",\n"
+" * \"c\" îçíàśàâà \"master äèńê íà âòîđèÿ IDE êîíòđîëćđ\",\n"
+" * \"d\" îçíàśàâà \"slave äèńê íà âòîđèÿ IDE êîíòđîëćđ\".\n"
+"\n"
+"\n"
+"Ïđè SCSI óńòđîéńòâà, \"a\" îçíàśàâà \"ïúđâè òâúđä äèńê\", \"b\" îçíàśàâà "
+"\"âòîđè òâúđä äèńê\" è ò.í.."
+
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Other Media"
-msgstr "Äđóă íîńèòćë"
+msgid "Remove"
+msgstr "Ïđćìàőâà"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select another media to restore from"
-msgstr "Èçáćđćòć äđóă íîńèòćë çà âúçńòàíîâÿâàíć îò íćăî"
+msgid "Lesotho"
+msgstr "Ëćńîòî"
-#: ../../standalone/drakbackup:1
+#: ../../ugtk2.pm:1
#, c-format
-msgid "Please enter the directory where backups are stored"
-msgstr ""
+msgid "utopia 25"
+msgstr "utopia 25"
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Restore from Hard Disk."
-msgstr "Âúçńòàíîâÿâà îò òâúđä äèńê."
+msgid "Pipe job into a command"
+msgstr "Ïđćêàđàé çàäàíèćòî ïđćç êîìàíäà"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Use quota for backup files."
-msgstr "Èçïîëçâà êâîòà çà ôàéëîâć íà đćçćđâíî êîïèć."
+msgid "new dynamic device name generated by core kernel devfs"
+msgstr "íîâî äèíàìèśíî óńòđîéńòâî ăćíćđèđàíî îò ÿäđîòî devfs"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Ìîëÿ, âúâćäćòć ìàêńèìàëíèÿò đàçìćđ\n"
-" ïîçâîëćí çà Drakbackup"
+msgid "Yes"
+msgstr "Äà"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the directory to save:"
-msgstr "Ìîëÿ, âúâćäćòć äèđćêòîđèÿòà çà çàïàçâàíć:"
+msgid "Cote d'Ivoire"
+msgstr "Êîò ä'èâîàđ"
-#: ../../standalone/drakbackup:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Use Hard Disk to backup"
-msgstr "Èçïîëçâà òâúđä äèńê çà đćçćđâíî êîïèć"
+msgid "Which protocol do you want to use?"
+msgstr "Êàêúâ ïđîòîêîë æćëàćòć äà ïđîìćíèòć ?"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "please choose the date to restore"
-msgstr "ìîëÿ, èçáćđćòć äàòàòà çà âúçńòàíîâÿâàíć"
+msgid "Restore Progress"
+msgstr "Ïđîăđćń íà âúçńòàíîâÿâàíć"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Backup the system files before:"
-msgstr "Đćçćđâíî êîïèć íà ôàéëîâć ïđćäè:"
+msgid "Estonia"
+msgstr "Ćńòîíèÿ"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
+msgid "Choose the host on which the local scanners should be made available:"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "OK to restore the other files."
-msgstr "OK çà âúçńòàíîâÿâàíć íà äđóăè ôàéëîâć."
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
+msgstr ""
+"Èìàòć ïđàçíèíà â òàáëèöàòà ń äÿëîâćòć, íî íć ìîăà äà ÿ èçïîëçâàì.\n"
+"Ćäèíńòâćíèÿò íàśèí ć äà ïđćìćńòèòć ăëàâíèòć ńè äÿëîâć, çà äà èìàòć ïđàçíî "
+"ìÿńòî ńëćä extended-äÿëîâćòć"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " Restore Configuration "
-msgstr " Êîíôèăóđàöèÿ çà âúçńòàíîâÿâàíć "
+msgid "Channel"
+msgstr "Êàíàë"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid " Successfuly Restored on %s "
-msgstr ""
+msgid "Add"
+msgstr "Äîáàâÿ"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid " All of your selected data have been "
-msgstr ""
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "Íÿìà íàńòđîéâàíî ńïîäćëÿíć íà Èíòćđíćò âđúçêàòà."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup files are corrupted"
-msgstr ""
+msgid " Error while sending mail. \n"
+msgstr " Ăđćűêà ïî âđćìć íà èçïđàùàíć íà ïîùà. \n"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Ìîëÿ, èçáćđćòć ńćđèćí ïîđò êúì êîéòî ńâúđçàí ìîäćìúò âè."
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
+#, c-format
+msgid "Keyboard"
+msgstr "Êëàâèàòóđà"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"List of data corrupted:\n"
-"\n"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"List of data to restore:\n"
-"\n"
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
+msgid "Choose the connection you want to configure"
+msgstr "Èçáćđćòć âđúçêàòà, êîéòî èńêàòć äà èçïîëçâàòć"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "\t-Network by webdav.\n"
-msgstr ""
+msgid "Please wait, setting security level..."
+msgstr "Ìîëÿ, èçáćđćòć íèâî íà ńèăóđíîńò..."
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr ""
+msgid "Mandrake Linux 9.1: the ultimate development platform"
+msgstr "Mandrake Linux 9.1 ć íćïđćêúńíàòî đàçđàáîòâàùà ńć ïëàòôîđìà"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr ""
+msgid "Configuring network device %s"
+msgstr "Íàńòđîéêà íà ìđćæîâîòî óńòđîéńòâî %s"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr ""
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "activated"
+msgstr "àêòèâèđàé ńćăà"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "\t-Tape \n"
+msgid "Please choose which network interface will be used for the dhcp server."
msgstr ""
+"Ìîëÿ, èçáćđćòć êîé ìđćæîâ àäàïòćđ äà èçïîëçâàì çà âđúçêà êúì dhcp ńúđâúđ."
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-CDROM.\n"
-msgstr ""
+msgid "Finding packages to upgrade..."
+msgstr "Òúđńÿ ïàêćòè çà îáíîâÿâàíć"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\t-Hard drive.\n"
-msgstr ""
+msgid "Mount point: "
+msgstr "Ìÿńòî íà ìîíòèđàíć: "
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
+msgid "parse all fonts"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
+msgid "With X"
+msgstr "Ń X"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "\tBackups use tar and bzip2\n"
+msgid "Multi-head configuration"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "\tDo not include System Files\n"
-msgstr ""
+msgid "No browser available! Please install one"
+msgstr "Íÿìà íàëèśíà ïđîăđàìà çà ïđćăëćä! Ìîëÿ èçáćđćòć ćäíà"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
"\n"
-"- Options:\n"
+"%s"
msgstr ""
+"Äà çàïàçÿ ëè ïđîìćíèòć ?\n"
+"Òćêóùàòà íàńòđîéêà ć:\n"
"\n"
-"- Îïöèè:\n"
+"%s"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "Íć ìîæćòć äà èíńòàëèđàíć ReiserFS íà äÿë ïî-ìàëúê îò 32 ÌÁ"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"- Save via %s on host: %s\n"
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
+"rwho ïđîòîêîëà ïîçâîëÿâà íà îòäàëćśćíè ïîòđćáèòćëè äà ńć ńäîáèÿò ńúń ńïèńúê\n"
+"íà âńèśêè ïîòđćáèòćëè âëćçëè íà ìàűèíà ń đàáîòćù rwho äćìîí (ïîäîáćí íà "
+"finger)."
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "\t\tErase=%s"
-msgstr ""
+msgid "Domain name"
+msgstr "Èìć íà äîìćéíà"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
+msgid "Sharing of local printers"
+msgstr "Ïîäćëÿíć íà ëîêàëíè ïđèíòćđè"
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
#, c-format
-msgid " (multi-session)"
-msgstr ""
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgstr "http://www.mandrakelinux.com/en/91errata.php3"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on device: %s"
-msgstr " íà óńòđîéńòâî: %s"
+msgid "Available printers"
+msgstr "Íàëèśíè ïđèíòćđè"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "RW"
-msgstr ""
+msgid "Empty"
+msgstr "Ïđàçćí"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
-"- Burn to CD"
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
+"\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
+"\n"
+"\n"
+"\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
+msgid "text width"
+msgstr "űèđèíà íà òćêńò"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
+msgid "Where do you want to mount device %s?"
+msgstr "Êúäć èńêàòć äà ìîíòèđàòć óńòđîéńòâî %s ?"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"\n"
-"- Other Files:\n"
+msgid "The default lease (in seconds)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
+msgid "Interface \"%s\""
+msgstr "Èíòćđôćéń \"%s\""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "With basic documentation (recommended!)"
+msgstr "Ń áàçîâà äîêóìćíòàöèÿ (ïđćïîđúśâà ńć!)"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "1 button"
+msgstr "1 áóòîí"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"- System Files:\n"
+"There are %d unknown printers directly connected to your system"
msgstr ""
"\n"
-"- Ńèńòćìíè ôàéëîâć:\n"
+"Èìà %d íćèçâćńòíè ïđèíòćđè âêëțśćíè êúì âàűàòà ńèńòćíìà"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
+#, c-format
+msgid "Test"
+msgstr "Òćńò"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"Backup Sources: \n"
+"Allow/Forbid direct root login."
msgstr ""
+"Arguments: (arg)\n"
"\n"
-"Èçòîśíèê çà đćçćđâíî êîïèć: \n"
+"Ïîçâîëÿâà/Çàáđàíÿâà äèđćêòíî âëèçàíć íà root."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select user manually"
-msgstr "Èçáèđà ïîòđćáèòćëè đúśíî"
+msgid "Korea"
+msgstr "Êîđćÿ"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Backup Users"
-msgstr "Đćçćđâíî êîïèć íà ïîòđćáèòćëè"
+msgid "Your choice? (default `%s'%s) "
+msgstr "Âàűèÿò èçáîđ ? (ïî ïîäđàçáèđàíć ć `%s'%s) "
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Backup system"
-msgstr "Ńèńòćìà çà ńúőđàíćíèć"
+msgid "Raw printer"
+msgstr "Raw ïđèíòćđ"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "Ìîëÿ èçáćđćòć êàêâî èńêàòć äà çàïàçèòć"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "official vendor name of the cpu"
+msgstr "èìćòî íà ïđîèçâîäèòćëÿ íà óńòđîéńòâîòî"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "on Tape Device"
-msgstr ""
+msgid "Vendor"
+msgstr "Ïđîèçâîäèòćë"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "on CDROM"
-msgstr ""
+msgid "Interface %s"
+msgstr "Èíòćđôćéń %s"
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "across Network"
-msgstr ""
+msgid "Configure mouse"
+msgstr "Íàńòđîéêà íà ìèűêà"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "on Hard Drive"
-msgstr ""
+msgid "Choose the mount points"
+msgstr "Èçáćđćòć ìćńòà çà ìîíòèđàíć"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please choose where you want to backup"
-msgstr "Ìîëÿ, èçáćđćòć ïàêćòèòć, êîèòî èńêàòć äà èíńòàëèđàòć."
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "OK"
+msgstr "OK"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "More Options"
-msgstr "Äîïúëíèòćëíè îïöèè"
+msgid "Yugoslavian (latin)"
+msgstr "Țăîńëàâńêà (ëàòèíèöà)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "When"
-msgstr "Êîăà"
+msgid "Installing"
+msgstr "Èíńòàëèđàì"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Where"
-msgstr "Êúäć"
+msgid "Launch userdrake"
+msgstr "Ńòàđòèđà userdrake"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "What"
-msgstr "Êàêâî"
+msgid "Is this an install or an upgrade?"
+msgstr "Òîâà íîâà èíńòàëàöèÿ ëè ć èëè îáíîâÿâàíć ?"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr ""
+msgid "ISDN card"
+msgstr "ISDN êàđòà"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Send mail report after each backup to:"
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
"\n"
-"Note that currently all 'net' medias also use the hard drive."
msgstr ""
+"Ïîçäđàâëćíèÿ, ìđćæîâàòć è Èíòćđíćò íàńòđîéêàòà ć çàâúđűćíà.\n"
+"\n"
+"Íàńòđîéêèòć ùć áúäàò ïđèëîæćíè êúì ńèńòćìàòà âè.\n"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Please choose the\n"
-"media for backup."
+msgid "\t-Hard drive.\n"
msgstr ""
-"Ìîëÿ, èçáćđćòć\n"
-"íîńèòćë çà đćçćđâíî êîïèć."
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#: ../../help.pm:1
+#, c-format
msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Ìîëÿ, èçáćđćòć ïàêćòèòć, êîèòî èńêàòć äà èíńòàëèđàòć."
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
+"\n"
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Use daemon"
-msgstr "Èçïîëçâà äćìîí"
+msgid "Printer on remote CUPS server"
+msgstr "Ïđèíòćđ íà îòäàëćśćí CUPS ńúđâúđ"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "monthly"
+msgid ""
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
msgstr ""
+"Íćńïćűíî ïđćìàőâàíć íà ïđèíòćđ \"%s\" îò Star Office/OpenOffice.org/GIMP."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "weekly"
-msgstr ""
+msgid "delete"
+msgstr "èçòđèâà"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "daily"
+msgid "here if no."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "DHCP host name"
+msgstr "Èìć íà őîńò:"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid "hourly"
+msgid "The maximum lease (in seconds)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "HardDrive / NFS"
-msgstr "Òâúđä äèńê / NFS"
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "Ìîëÿ, èçáćđćòć êúì êîé ńćđèćí ïîđò ć ńâúđçàíà ìèűêàòà âè."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
+msgid "Did it work properly?"
+msgstr "Ïđîđàáîòè ëè êàêòî òđÿáâà ?"
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Please enter the directory to save to:"
-msgstr "Ìîëÿ âćâćäćòć äèđćêòîđèÿòà çà çàïàçâàíć:"
+msgid "Poor"
+msgstr "Ëîűî"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please check if you want to eject your tape after the backup."
+msgid "The DHCP start range"
msgstr ""
-"Ìîëÿ, ïđîâćđćòć äàëè èńêòć äà èçâàäèòć ëćíòàòà ńëćä êàòî ïđàâèòć đćçćđâíî "
-"êîïèć."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr ""
-"Ìîëÿ, ïđîâćđćòć äàëè èńêòć äà èçòđèćòć ëćíòàòà ïđćäè äà ïđàâèòć đćçćđâíî "
-"êîïèć."
+msgid "Grenada"
+msgstr "Ăđćíàäà"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "Ìîëÿ, ïđîâćđćòć äàëè èńêòć äà èçïîëâàòć íćïđćíàâèâàűî ńć óńòđîéńòâî."
+msgid "Unsafe"
+msgstr "Îïàńćí"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please enter the device name to use for backup"
-msgstr ""
+msgid ", %s sectors"
+msgstr ", %s ńćêòîđà"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Use tape to backup"
-msgstr "Èçïîëçâà ëćíòà çà đćçćđâíî êîïèć"
+msgid "No"
+msgstr "Íć"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No CD device defined!"
-msgstr "Íć ć äèôèíèđàíî CD óńòđîéńòâî!"
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
+msgstr ""
+"Äàëè âàűèÿò ïđèíòćđ ć ìíîăîôóíêöèîíàëíî óńòđîéńòâî îò HP èëè Sony "
+"(OfficeJet, PSC, LaserJet 1100/1200/1220/3200/3300 ńúń ńêćíćđ, Sony IJP-"
+"V100), HP PhotoSmart èëè HP LaserJet 2200?"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
+msgid "Guadeloupe"
+msgstr "Ăâàäćëóïà"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "could not find any font.\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "Ìîëÿ, ïđîâćđćòć äàëè èçïîëçâàòć DVDRAM óńòđîéńòâî"
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "Èńêàòć ëè BackSpace äà ïîäàâà Delete íà êîíçîëàòà ?"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "Ìîëÿ, ïđîâćđćòć äàëè èçïîëçâàòć DVDR óńòđîéńòâî"
+msgid "Vertical refresh rate"
+msgstr "Âćđòèêàëíà ńêîđîńò íà âúçńòàíîâÿâàíć"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
#, c-format
-msgid " Erase Now "
-msgstr " Èçòđèâà ńćăà "
+msgid "Entering step `%s'\n"
+msgstr "Íàâëèçàì â ćòàï `%s'\n"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "Ìîëÿ, öúêíćòć íà íîńèòćëÿ"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "Ìîëÿ, ïđîâćđćòć äàëè èçïîëçâàòć CDRW ìćäèÿ"
+msgid "Removing %s ..."
+msgstr "Èçòđèâàíć íà %s ..."
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check for multisession CD"
-msgstr "Ìîëÿ, öúêíćòć íà íîńèòćëÿ"
+#: ../../lang.pm:1
+#, c-format
+msgid "Niger"
+msgstr "Íèăćđ"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "Ìîëÿ, èçáćđćòć đàçìćđà íà âàűćòî CD/DVD (Mb)"
+msgid "No printer"
+msgstr "Íÿìà ïđèíòćđ"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
-msgstr ""
+msgid "alert configuration"
+msgstr "êîíôèăóđàöèÿ íà òđćâîăà"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use CD/DVDROM to backup"
-msgstr ""
+msgid "NetWare Printer Options"
+msgstr "Îïöèè çà NetWare ïđèíòćđ"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Need hostname, username and password!"
+msgid "%s BootSplash (%s) preview"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Remember this password"
-msgstr "Çàïîìíÿ òàçè ïàđîëà"
+msgid "General"
+msgstr "Îńíîâíî"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please enter your password"
-msgstr "Ìîëÿ, âúâćäćòć âàűàòà ïàđîëà"
+msgid "Printing system: "
+msgstr "Ïćśàòíà ńèńòćìà: "
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please enter your login"
-msgstr "Ìîëÿ, âúâćäćòć âàűèÿò ëîăèí"
+msgid "Add a user"
+msgstr "Äîáàâÿíć íà ïîòđćáèòćë"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
-msgstr ""
+msgid "Network configuration (%d adapters)"
+msgstr "Íàńòđîéêà íà ìđćæàòà (%d àäàïòćđà)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "Please enter the host name or IP."
-msgstr "Ìîëÿ, âúâćäćòć èìć íà őîńò èëè IP."
+msgid "Mandatory package %s is missing"
+msgstr "Çàäúëæèòćëíèÿò ïàêćò %s ëèïńâà"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
-msgstr ""
+msgid "Philippines"
+msgstr "Ôèëèïèíè"
-#: ../../standalone/drakbackup:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#, c-format
+msgid "Ok"
+msgstr "Ok"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Print Queue Name"
+msgstr "Èìć íà ïćśàòíàòà îïàűêàòà"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "Èńêàòć ëè äà èçïîëçâàòć aboot ?"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "Áćëàđóńêà"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-" Transfer \n"
-"Now"
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
msgstr ""
-" Ïđćőâúđëÿ \n"
-"Ńćăà"
+"PDQ ïîääúđæà ńàìî ëîêàëíè ïđèíòćđè, îòäàëćśćíè LPD ïđèíòćđè è Socket/TCP "
+"ïđèíòćđè.\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Move files to the new partition"
+msgstr "Ïđćìćńòè ôàéëîâćòć íà íîâ äÿë"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use Expect for SSH"
-msgstr ""
+msgid "Restore From Catalog"
+msgstr "Âúçńòàíîâÿâà îò êàòàëîă"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Net Method:"
-msgstr ""
+msgid "Pitcairn"
+msgstr "Ïèòêćúđí"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use network connection to backup"
-msgstr "Ëîű backup-ôàéë"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "IDE"
+msgstr "IDE"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Users"
-msgstr "Ïîòđćáèòćëè"
+msgid "group :"
+msgstr "ăđóïà :"
-#: ../../standalone/drakbackup:1
+#: ../../fs.pm:1
#, c-format
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
+msgid "mounting partition %s in directory %s failed"
+msgstr "ìîíòèđàíćòî íà äÿë %s â äèđćêòîđèÿ %s ïđîïàäíà"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr ""
+msgid "Lilo screen"
+msgstr "Lilo ćêđàí"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid "Remove Selected"
-msgstr "Èçòđèâàíć íà îèçáđàíèòć"
+msgid "LILO with graphical menu"
+msgstr "LILO ń ăđàôèśíî ìćíț"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Do not include the browser cache"
-msgstr ""
+msgid "Estimating"
+msgstr "Ïđćńìÿòàíć"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "Ìîëÿ, èçáćđćòć ïàêćòèòć, êîèòî èńêàòć äà èíńòàëèđàòć."
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "You can't unselect this package. It is already installed"
+msgstr "Íć ìîæćòć äà îńòàâèòć òîçè ïàêćò íćìàđêèđàí. Òîé âćść ć èíńòàëèđàí"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr ", ïđèíòćđ \"%s\" íà SMB/Windows ńúđâúđ \"%s\""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Íć âêëțśâà êđèòèśíè ôàéëîâć (passwd, group, fstab)"
+msgid "Go on anyway?"
+msgstr "Äà ïđîäúëæà ëè âńć ïàê ?"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "Òúđńÿ íàëèśíè ïàêćòè è ïđćïîńòđîÿâàì rpm áàçàòà äàííè..."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use incremental backup (do not replace old backups)"
+msgid "Does not appear to be recordable media!"
msgstr ""
-"Èçïîëçâà èíêđćìćíòàëíî ńúçäàâàíć íà đćçćđâíî êîïèć ( íć çàìćíà ńòàđèòć)"
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Đćçćđâíî êîïèć íà âàűèòć ńèńòćìíè ôàéëîâć (/etc äèđćêòîđèÿ)"
+msgid "Specify options"
+msgstr "Çàäàé îïöèè"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
+msgid "Vanuatu"
+msgstr "Âàíóàòó"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Either the server name or the server's IP must be given!"
+msgstr "Òđÿáâà äà áúäàò çàäàäćíè è èìćòî è IP àäđćńà íà ńúđâúđà !"
+
+#: ../../any.pm:1
#, c-format
msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
"\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
msgstr ""
+"Êëèćíòńêÿò bootdisk ć íćîáőîäèì çà ńòàđòèđàíć â Linux ńèńòćìàòà âè "
+"íćçàâèńèìî\n"
+"îò îáèêíîâćíèÿ bootloader. Òîâà ć ïîëćçíî, àêî íć èńêàòć äà èíńòàëèđàòć\n"
+"SILO íà ńèńòćìàòà ńè, àêî íÿêîÿ äđóăà îïćđàöèîííà ńèńòćìà ìàőíć SILO\n"
+"èëè àêî SILO íć đàáîòè ń őàđäóćđíàòà âè íàńòđîéêà. Êëèćíòńêèÿò bootdisk\n"
+"ìîæć äà áúäć èçïîëçâàí ńúń\n"
+"ńïàńèòćëíèÿò îáđàç íà Mandrake, óëćńíÿâàêè âúçńòàíîâÿâàíćòî ïđè đćäêè\n"
+"ńëóśàè íà ńđèâ.\n"
+"\n"
+"Àêî èńêàòć äà ńúçäàäćòć bootdisk çà âàűàòà ńèńòćìà, ïîńòàâćòć äèńêćòà â\n"
+"ïúđâîòî óńòđîéńòâî è íàòèńíćòć \"Ok\"."
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Select the files or directories and click on 'Add'"
+msgid "You can't use an encrypted file system for mount point %s"
msgstr ""
+"Âèć íć ìîæć äà èçïîëçâàòć êđèïòèđàíà ôàéëîâà ńèńòćìà çà òîśêà íà ìîíòèđàíć %s"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "File Selection"
-msgstr "Èçáîđ íà ôàéë"
+msgid "Norfolk Island"
+msgstr "Íîđôîëê Îńòđîâ"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Can't create catalog!"
-msgstr ""
+msgid "Theme installation failed!"
+msgstr "Èíńòàëàöèÿòà íà òćìà ć íćóńïćűíà!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid " Error while sending mail. \n"
-msgstr " Ăđćűêà ïî âđćìć íà èçïđàùàíć íà ïîùà. \n"
+msgid "Nothing to do"
+msgstr "Íÿìà íèùî çà ïđàâćíć"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
+msgid "Use for loopback"
+msgstr "Èçïîëçâàé çà loopback"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
+msgid "use pppoe"
+msgstr "èçïîëçâàé PPPOE"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
+msgid "Moving files to the new partition"
+msgstr "Ïđćìćńòè ôàéëîâćòć íà íîâ äÿë"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"file list sent by FTP: %s\n"
-" "
-msgstr ""
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s ń ĆÊŃÏĆĐÈÌĆÍÒÀËÍO őàđäóćđíî 3D óńêîđćíèć"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1
#, c-format
-msgid "No changes to backup!"
-msgstr "Íÿìà ïđîìćíè çà đćçćđâíî êîïèć!"
+msgid "Advanced"
+msgstr "Íàïđćäíèśàâ"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Ëîű backup-ôàéë"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transfer"
+msgstr "Ïđćőâúđëè"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup Other files..."
-msgstr "Đćçćđâíî êîïèć íà äđóăè ôàéëîâć..."
+msgid "Dvorak (Swedish)"
+msgstr "Äâîđàê (Űâćäńêà)"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "Ïđîăđćń çà đćçćđâíî êîïèć íà òâúđä äèńê..."
+msgid "More Options"
+msgstr "Äîïúëíèòćëíè îïöèè"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Backup User files..."
-msgstr "Đćçćđâíî êîïèć íà ïîòđćáèòćëńêè ôàéëîâć..."
+msgid "Afghanistan"
+msgstr "Àôăàíèńòàí"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup system files..."
+msgid "Delete Hard Drive tar files after backup to other media."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "No tape in %s!"
+msgid ""
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
msgstr ""
+"cron ć ńòàíäàđòíà UNIX ïđîăđàìà, êîÿòî ïćđèîäèśíî ïóńêà îïđćäćëćíè ïđîăđàìè\n"
+"ïî đàçïèńàíèć. vixie cron äîáàâÿ ìíîæćńòâî ïđćèìóùćńòâà íàä òćçè íà ïđîńòèÿ\n"
+"UNIX cron, âêëțśèòćëíî ïî-äîáđà ńèăóđíîńò è ìîùíè íàńòđîéâàùè îïöèè."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Permission problem accessing CD."
-msgstr ""
+msgid "Burundi"
+msgstr "Áóđóíäè"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "This may take a moment to erase the media."
-msgstr ""
+msgid "Add Client -->"
+msgstr "Äîáàâÿ êëèćíò -->"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Not erasable media!"
-msgstr ""
+msgid "Read carefully!"
+msgstr "Ïđîśćòćòć âíèìàòćëíî !"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Does not appear to be recordable media!"
+msgid "RW"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "No CDR/DVDR in drive!"
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "WebDAV transfer failed!"
-msgstr ""
+msgid "Port"
+msgstr "Ïîđò"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "WebDAV remote site already in sync!"
+msgid "No (experts only)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Total progess"
-msgstr "Îáù ïđîăđćń"
+msgid "No kernel selected!"
+msgstr "Íÿìà èçáđàíî ÿäđî!"
-#: ../../standalone/drakbackup:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
-"\n"
-"without being prompted for a password."
-msgstr ""
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Íàòèńíćòć 'enter' çà äà ńòàđòèđàòć èçáđàíàòà ÎŃ, 'e' äà đćäàêòèđàòć"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "%s not responding"
-msgstr ""
+msgid "Set-GID"
+msgstr "Çàäàâà-GID"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Can't find %s on %s"
-msgstr "Íć ìîăà äà íàìćđÿ %s íà %s"
+msgid "The encryption keys do not match"
+msgstr "Êëțśîâćòć çà êđèïòèđàíć íć ńúâïàäàò"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr ""
+msgid "Right \"Windows\" key"
+msgstr "Äćńćí \"Windows\" êëàâèű"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bad password on %s"
-msgstr "Ëîűà ïàđîëà íà %s"
+msgid "CDROM / DVDROM"
+msgstr "CDROM / DVDROM"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "No password prompt on %s at port %s"
+msgid "if set to yes, check empty password in /etc/shadow."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "ERROR: Cannot spawn %s."
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
msgstr ""
+"Ïđćäè äà ïđîäúëæèòć, òđÿáâà âíèìàòćëíî äà ïđîśćòćòć óńëîâèÿòà íà ëèöćíçà. "
+"Òîé\n"
+"ïîêđèâà öÿëàòà Mandrake Linux äèńòđèáóöèÿ, è, àêî íć ńòć ńúăëàńíè ń âńèśêè "
+"óńëîâèÿ\n"
+"â íćăî, öúêíćòć íà áóòîíà Îòêàç. Òîâà íćçàáàâíî ùć ïđèêëțśè èíńòàëàöèÿòà. Çà "
+"äà\n"
+"ïđîäúëæèòć ń èíńòàëàöèÿòà, öúêíćòć íà áóòîíà Ïđèćìè."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This may take a moment to generate the keys."
+msgid ""
+"Here is a list of the available printing options for the current printer:\n"
+"\n"
msgstr ""
+"Òîâà ć ńïèńúê îò íàëèśíè çà ïćśàò îïöèè îòíàńÿùè ńć çà òćêóùèÿò ïđèíòćđ:\n"
+"\n"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolutions"
+msgstr "Đàçäćëèòćëíà ńïîńîáíîńò"
+
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"%s exists, delete?\n"
+"drakfirewall configurator\n"
"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
msgstr ""
+"Íàńòđîéśèê çà ìàëêà çàùèòíà ńòćíà\n"
+"\n"
+"Òîâà íàńòđîéâà ïćđńîíàëíà çàùèòíà ńòćíà çà òàçè Mandrake Linux ìàűèíà.\n"
+"Çà ìîùíî ïîńòâćòćíî íà çàùèòàòà đćűćíèć, ìîëć, ïîăëćäíćòć ńïćöèàëèçèđàíàòà\n"
+"MandrakeSecurity Firewall äèńòđèáóöèÿ."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
-"\n"
+"Please enter your username, password and domain name to access this host."
msgstr ""
+"Ìîëÿ, âúâćäćòć âàűćòî èìć, ïàđîëà è èìć íà äîìćéí çà äîńòúï äî òîçè őîńò."
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Remove selected host"
+msgstr "Èçòđèâàíć íà îïàűêàòà"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Network configuration"
+msgstr "Íàńòđîéêà íà ìđćæàòà"
+
+#: ../../any.pm:1
+#, c-format
+msgid "No sharing"
+msgstr "Íć ïîäćëÿ"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule down one level"
+msgstr "Ïđćìćńòâà èçáđàíîòî ïđàâèëî ćäíî íèâî íàäîëó"
+
+#: ../../common.pm:1
+#, c-format
+msgid "TB"
+msgstr "ÒÁ"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Please check if you are using a DVDR device"
+msgstr "Ìîëÿ, ïđîâćđćòć äàëè èçïîëçâàòć DVDR óńòđîéńòâî"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "FATAL"
+msgstr "ÔÀÒÀËÍÎ"
+
+#: ../../standalone/drakpxe:1
+#, c-format
msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
"\n"
-" DrakBackup Daemon Report\n"
-"\n"
+"The network address is %s using a netmask of %s.\n"
"\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Delete"
+msgstr "Èçòđèé"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-" DrakBackup Report \n"
-"\n"
+"Allow/Forbid reboot by the console user."
msgstr ""
+"Arguments: (arg)\n"
"\n"
-" DrakBackup Đàïîđò \n"
-"\n"
+"Ïîçâîëÿâà/Çàáđàíÿâà ïđćńòàđòèđàíć îò ïîòđćáèòćë íà êîíçîëà."
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "INFO"
-msgstr "ÈÍÔÎ"
+msgid ""
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
+msgstr ""
+"Kîìïțòúđà âè ìîæć àâòîìàòèśíî, äà âëćçć â X ïđè ńòàđòèđàíć.\n"
+"Èńêàòć ëè X äà ńć ńòàđòèđà, êîăàòî đćńòàđòèđàòć ńèńòćìàòà?"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "FATAL"
-msgstr "ÔÀÒÀËÍÎ"
+msgid "Build the disk"
+msgstr "Ńúçäàé äèńêúò"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "WARNING"
-msgstr ""
+msgid "Disconnect %s"
+msgstr "Đàçêàśâà %s"
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Status:"
+msgstr "Ńúńòîÿíèć:"
+
+#: ../../network/network.pm:1
+#, c-format
+msgid "HTTP proxy"
+msgstr "HTTP proxy"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "SSH Server"
+msgstr "SSH Ńúđâúđ"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Cron not available yet as non-root"
+msgid "\t-Network by rsync.\n"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Èíńòàëàöèÿòà íà %s ïđîâàëćíà. Ïîÿâè ńć ńëćäíàòà ăđćűêà:"
+msgid "European protocol"
+msgstr "Ćâđîïćéńêè ïđîòîêîë"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No, I don't want autologin"
-msgstr "Íć, íć èńêàì autologin"
+msgid ", printer \"%s\" on server \"%s\""
+msgstr ", ïđèíòćđ \"%s\" íà ńúđâúđ \"%s\""
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Äà, èńêàì autologin ń òîâà (ïîòđćáèòćë, äćńêòîï)"
+msgid "Error"
+msgstr "Ăđćűêà"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "Ïóńíè X-Window ńèńòćìàòà ïđè ńòàđòèđàíć"
+msgid "allow \"su\""
+msgstr "ïîçâîëÿâà \"su\""
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "System mode"
-msgstr "Ńèńòćìćí đćæèì"
+msgid "Australia"
+msgstr "Àâńòđàëèÿ"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Bootsplash"
+msgid "please wait during ttmkfdir..."
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Lilo screen"
-msgstr "Lilo ćêđàí"
+msgid "Configure only card \"%s\"%s"
+msgstr "Íàńòđîéêà ńàìî íà êàđòà \"%s\"(%s)"
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
+msgid "Level"
+msgstr "Íèâî"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Themes"
-msgstr "Òćìè"
-
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid "Splash selection"
-msgstr "Çàïàçè èçáîđ íà ïàêćòè"
+msgid "Change the printing system"
+msgstr "Ïđîìÿíà ńèńòćìàòà çà ïćśàò"
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
msgstr ""
-"Â ìîìćíòà èçïîëçâàòć %s êàòî ïđîăđàìà çà ńòàđòèđàíć.\n"
-"Öúêíćòć íà Íàńòđîéêà, çà äà ńòàđòèđàòć óńòàíîâÿâàùèÿ ìàăüîńíèê."
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr "LiLo è Bootsplash òćìè ńà óńïćűíî èíńòàëèđàíè"
-
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
#, c-format
-msgid "Theme installation failed!"
-msgstr "Èíńòàëàöèÿòà íà òćìà ć íćóńïćűíà!"
+msgid "Configure services"
+msgstr "Íàńòđîéêà íà óńëóăèòć"
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Notice"
-msgstr "Áćëćæêà"
+msgid "Broadcast Address:"
+msgstr "Broadcast àäđćń:"
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Relaunch 'lilo'"
-msgstr "Ïđćńòàđòèđà 'lilo'"
+msgid "mount failed: "
+msgstr "ìîíòèđàíćòî íć óńïÿ: "
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
-msgstr "Ïđàâè initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+msgid "Image"
+msgstr "Îáđàç"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr "Íć ìîăà äà ńòàđòèđàì mkinitrd -f /boot/initrd-%s.img %s."
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"Íćóńïćő ïđè äîáàâÿíć íà ïđèíòćđ \"%s\" íà Star Office/OpenOffice.org/GIMP."
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
+#, c-format
+msgid "Remote Administration"
+msgstr "Îòäàëćśćíà àäìèíèńòđàöèÿ"
+
+#: ../../modules.pm:1
#, c-format
msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
msgstr ""
-"Íć ìîăà äà ïèűà â /etc/sysconfig/bootsplash\n"
-"Ôàéëà íć ć íàìćđćí."
+"PCMCIA ïîäđúæêàòà íÿìà ïîâćść äà ńúùćńâòóâà çà ÿäđî 2.2. Ìîëÿ, èçïîëçâàéòć "
+"2.4"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Write %s"
-msgstr "Ïèűć %s"
+msgid "Selected All"
+msgstr "Èçáèđà âńèśêî"
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr "Íć ìîăà äà ïèűà â /etc/sysconfig/bootsplash."
+msgid "CUPS - Common Unix Printing System"
+msgstr "CUPS - Îáùà Unix Ïđèíòćđíà Ńèńòćìà"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Lilo message not found"
-msgstr "Lilo ńúîáùćíèć íć ć íàìćđćíî"
+msgid "Webmin Service"
+msgstr "Webmin Îáńëóæâàíć"
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Copy %s to %s"
-msgstr "Êîïèđà %s â %s"
+msgid "device"
+msgstr "óńòđîéńòâî"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Backup %s to %s.old"
-msgstr "Đćçćđâíî êîïèć %s â %s.old"
+msgid "All"
+msgstr "Âńèśêè"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create new theme"
-msgstr "Ńúçäàâà íîâà òćìà"
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "Êîÿ ïđèíòćđíà ńèńòćìà (spooler) èçêàòć äà èçïîëçâàòć ?"
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"Ïîêàçâà òćìà\n"
-"íà êîíçîëà"
+msgid "Greece"
+msgstr "Ăúđöèÿ"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Install themes"
-msgstr "Èíńòàëèđàíć íà òćìè"
+msgid "An error occurred"
+msgstr "Ïîÿâè ńć ăđćűêà"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Lilo/grub mode"
-msgstr "Đćæèì íà Lilo/grub"
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
+msgstr ""
+"Òîçè ïàêćò òđÿáâà äà áúäć îáíîâćí\n"
+"Ńèăóđíè ëè ńòć, ść èńêàòć äà ăî èçêëțśèòć ?"
-#: ../../standalone/drakboot:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Yaboot mode"
-msgstr "Đćæèì íà Yaboot"
+msgid "Tamil (Typewriter-layout)"
+msgstr "Òàìèëńêà (ïèűćùà ìàűèíà)"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
+msgid "manual"
+msgstr "đúśíî"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/File/_Quit"
-msgstr "/Ôàéë/_Èçëèçà"
+msgid "Printer manufacturer, model, driver"
+msgstr "Ïđîèçâîäèòćë íà ïđèíòćđà, ìîäćë, äđàéâćđ"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "/_File"
-msgstr "/_Ôàéë"
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"Íÿìà íîńèòćë â óńòîéńòâîòî èëè ć çàùèòćíà îò ïèńàíć %s.\n"
+"Ìîëÿ ïîńòàâćòć ćäèí."
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Style Configuration"
-msgstr "Íàńòđîéêà íà íàśèíà íà ńòàđòèđàíć"
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
+msgstr ""
+"Äèđćêòîđèÿòà %s âćść ńúäúđæà íÿêàêâè äàííè\n"
+"(%s)"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "No browser available! Please install one"
-msgstr "Íÿìà íàëèśíà ïđîăđàìà çà ïđćăëćä! Ìîëÿ èçáćđćòć ćäíà"
+msgid "Printer on NetWare server"
+msgstr "Ïđèíòćđ íà NetWare ńúđâúđ"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "connecting to Bugzilla wizard ..."
-msgstr ""
+msgid "Give the ram size in MB"
+msgstr "Äàâà đàçìćđà RAM-ïàìćò â Mb"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Package not installed"
-msgstr "Ïàêćòà íć ć èíńòàëèđàí"
+msgid "Real name"
+msgstr "Èńòèíńêî èìć"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Not installed"
-msgstr "Íć ć èíńòàëèđàí"
+msgid "done"
+msgstr "ăîòîâî"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Standalone Tools"
-msgstr "Êîíçîëíè èíńòđóìćíòè"
+msgid "Please uncheck or remove it on next time."
+msgstr "Ìîëÿ, èçáćđćòć ńćđèćí ïîđò êúì êîéòî ńâúđçàí ìîäćìúò âè."
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Report"
-msgstr "Đàïîđò"
+msgid "Higher"
+msgstr "Ïî-âèńîêî"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the partitions you want to format"
+msgstr "Èçáćđćòć äÿëîâćòć, êîèòî èńêàòć äà ôîđìàòèđàòć"
+
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Release: "
-msgstr "Ìîëÿ èçśàêàéòć"
-
-#: ../../standalone/drakbug:1
-#, c-format
-msgid "Kernel:"
-msgstr ""
-
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Package: "
-msgstr "Ïàêćò: "
+msgid "Can't find %s on %s"
+msgstr "Íć ìîăà äà íàìćđÿ %s íà %s"
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Application:"
-msgstr "Ïđèëîæćíèć:"
+msgid "Japanese 106 keys"
+msgstr "ßïîíńêà 106 êëàâèűà"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Configuration Wizards"
-msgstr "Êîíôèăóđàöèîííè Ìàăüîńíèöè"
+msgid "This will take a few minutes."
+msgstr "Òîâà ùć îòíćìć íÿêîëêî ìèíóòè."
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
+msgid "Burkina Faso"
+msgstr "Áóđêèíà Ôàńî"
-#: ../../standalone/drakbug:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Windows Migration tool"
+msgid "Use scanners on remote computers"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Urpmi"
-msgstr ""
+msgid "Delete selected rule"
+msgstr "Èçòđèâà èçáđàíîòî ïđàâèëî"
-#: ../../standalone/drakbug:1
-#, c-format
-msgid "Software Manager"
-msgstr "Ńîôòóćđćí ìćíèäæúđ"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Ïđèíòćđ íà îòäàëćśćí CUPS ńúđâúđ"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Remote Control"
-msgstr "Îòäàëćśćí êîíòđîë"
+msgid "Insert a floppy in %s"
+msgstr "Ńëîæćòć äèńêćòà â óńòđîéńòâî %s"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Msec"
-msgstr "Ìńćê"
+msgid "Maldives"
+msgstr "Ìàëäèâè"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
+msgid "compact"
+msgstr "êîìïàêòćí"
-#: ../../standalone/drakbug:1
+#: ../../common.pm:1
#, c-format
-msgid "Mandrake Online"
-msgstr "Mandrake Online"
+msgid "1 minute"
+msgstr "1 ìèíóòà"
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "HardDrake"
-msgstr ""
+msgid "on channel %d id %d\n"
+msgstr "íà êàíàë %d id %d\n"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Synchronization tool"
-msgstr ""
+msgid ", multi-function device"
+msgstr ", ìíîăîôóíêöèîíàëíî óńòđîéńòâî"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "First Time Wizard"
-msgstr "Äîáđć äîűëè â ïúđâîíàśàëíèÿ ïîìîùíèê"
+#: ../../lang.pm:1
+#, c-format
+msgid "Laos"
+msgstr "Ëàîń"
-#: ../../standalone/drakbug:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Mandrake Control Center"
-msgstr "Êîíòđîëćí öćíòúđ íà Mandrake"
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr "Íÿìà FAT äÿëîâć çà ńìÿíà íà ăîëćìèíàòà (èëè íÿìà äîńòàúśíî ìÿńòî)"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Mandrake Bug Report Tool"
+msgid "Up"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Parameters"
-msgstr "Ïàđàìćòđè"
+msgid "Firewall"
+msgstr "Çàùèòíà ńòćíà"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Internet Connection Configuration"
-msgstr "Íàńòđîéêà íà Èíòćđíćò âđúçêà"
+msgid "Area:"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "DHCP Client"
-msgstr "DHCP êëèćíò"
+msgid "(E)IDE/ATA controllers"
+msgstr "(E)IDE/ATA êîíòđîëćđè"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ethernet Card"
-msgstr "Ethernet êàđòà"
+msgid "Printer Server"
+msgstr "Ńúđâúđ íà ïđèíòćđà"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Gateway"
-msgstr "Gateway"
+msgid "Disconnection from the Internet complete."
+msgstr "Đàçêàśâàíćòî îò Èíòćđíćò ć çàâúđűèëî"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Connection type: "
-msgstr "Òèï íà âđúçêàòà: "
+msgid "Custom configuration"
+msgstr "Ïîòđćáèòćëńêà íàńòđîéêà"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Profile: "
-msgstr "Ïđîôèë: "
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet connection configuration"
-msgstr "Íàńòđîéêà íà Èíòćđíćò âđúçêà"
+msgid "Saint Pierre and Miquelon"
+msgstr "Ńâćòè Ïèćđ è Ìèêćëîí"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
msgstr ""
-"Íÿìàòć Internet âđúçêà.\n"
-"Ńúçäàéòć òàêàâà, êàòî öúêíćòć íà 'Íàńòđîé'"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
+msgid "saving Bootsplash theme..."
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "activate now"
-msgstr "àêòèâèđàé ńćăà"
+msgid "Portugal"
+msgstr "Ïîđòóăàëèÿ"
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "deactivate now"
-msgstr "äćàêòèâèđàé ńćăà"
+msgid "Do you have another one?"
+msgstr "Èìàòć ëè äđóă(è) ?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "DHCP client"
-msgstr "DHCP êëèćíò"
+msgid ", printing to %s"
+msgstr ", ïćśàò íà %s"
-#: ../../standalone/drakconnect:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Assign host name from DHCP address"
+msgstr "Ìîëÿ, ïđîáâàéòć ìèűêàòà ńè"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Started on boot"
-msgstr "Ïóńíàò ïđè ńòàđòèđàíć"
+msgid "Toggle to normal mode"
+msgstr "Ïđćìèíè â Íîđìàëćí đćæèì"
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Boot Protocol"
-msgstr "Ńòàđòèđàù ïđîòîêîë"
+msgid "Generic"
+msgstr "Îáù"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Adapter %s: %s"
-msgstr "Àäàïòćđ %s: %s"
+msgid "Cylinder %d to %d\n"
+msgstr "Îò öèëèíäúđ %d äî öèëèíäúđ %d\n"
#: ../../standalone/drakconnect:1
#, c-format
-msgid "LAN Configuration"
-msgstr "Íàńòđîéêà íà ëîêàëíà ìđćæà"
+msgid "New profile..."
+msgstr "Íîâ ïđîôèë ..."
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LAN configuration"
-msgstr "Íàńòđîéêà íà LAN"
+msgid "Which disk do you want to move it to?"
+msgstr "Íà êîé äèńê èńêàòć äà ăî ïđćìćńòèòć ?"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Íÿìàòć íàńòđîćí èíòćđôćéń.\n"
-"Íàńòđîéòć ăè ïđćäè òîâà, êàòî öúêíćòć íà 'Íàńòđîéêà'"
+msgid "Display logo on Console"
+msgstr "Ïîêàçâà ëîăî íà Êîíçîëà"
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Connect..."
-msgstr "Ńâúđçâàíć ..."
+msgid "Windows Domain"
+msgstr "Windows äîìćéí"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Disconnect..."
-msgstr "Îòâúđçâàíć ..."
+msgid "Interface %s (on network %s)"
+msgstr "Èíòćđôćéń %s (íà ìđćæà %s)"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Not connected"
-msgstr "Íć ńâúđçàí"
+msgid "INFO"
+msgstr "ÈÍÔÎ"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connected"
-msgstr "Ńâúđçàí"
+msgid "Wallis and Futuna"
+msgstr "Óîëèń è Ôóòóíà Îńòđîâè"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Need to create /etc/dhcpd.conf first!"
+msgstr "Òđÿáâà äà ńúçäàäćòć ïúđâî /etc/dhcpd.conf!"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Is FPU present"
+msgstr ""
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "There are no scanners found which are available on your system.\n"
+msgstr ""
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
+"No additional information\n"
+"about this service, sorry."
msgstr ""
+"Íÿìà äîïúëíèòćëíà èíôîđìàöèÿ\n"
+"çà òàçè óńëóăà, ńúæćëÿâàì."
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Interface:"
-msgstr "Èíòćđôćéń:"
+msgid "Build Single NIC -->"
+msgstr "Ïîńòđîÿâà ćäèíèśćí NIC -->"
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Gateway:"
-msgstr "Gateway:"
+msgid "Is this correct?"
+msgstr "Âńèśêî ïđàâèëíî ëè ć ?"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Apply"
-msgstr "Ïđèëîæè"
+msgid "Marshall Islands"
+msgstr "Ìàđűàëîâè Îńòđîâè"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Click here to launch the wizard ->"
-msgstr "Öúêíćòć òóê, çà äà ńòàđòèđàòć ìàăüîńíèêà ->"
+msgid "Windows (FAT32)"
+msgstr "Windows (FAT32)"
-#: ../../standalone/drakconnect:1
+#: ../../steps.pm:1
#, c-format
-msgid "Wizard..."
-msgstr "Ìàăüîńíèê..."
+msgid "Root password"
+msgstr "Âúâćäćòć ïàđîëà çà root"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Status:"
-msgstr "Ńúńòîÿíèć:"
+msgid "Build All Kernels -->"
+msgstr "Ïîńòđîÿâà âńèśêè ÿäđà -->"
-#: ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Type:"
-msgstr "Òèï: "
+msgid "if set to yes, report unowned files."
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Internet access"
-msgstr "Èíòćđíćò äîńòúï"
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"Íÿìàòć swap-äÿë\n"
+"\n"
+"Äà ïđîäúëæà ëè âńć ïàê ?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Server IP missing!"
+msgstr "Ëèïńâà èìć íà NCP ńúđâúđ !"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Hostname: "
-msgstr "Èìć íà őîńò:"
+msgid "Suriname"
+msgstr "Ńóđèíàì"
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Íàńòîéêà íà ëîêàëíà ìđćæà ..."
+msgid "Enable ACPI"
+msgstr "Ńòàđòèđàíć îò CD "
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "State"
-msgstr "Ńúńòîÿíèć"
+msgid "Graphical Environment"
+msgstr "Ăđàôèśíà ńđćäà"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Driver"
-msgstr "Äđàéâćđ"
+msgid "Gibraltar"
+msgstr "Ăèáđàëòàđ"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Protocol"
-msgstr "Ïđîòîêîë"
+msgid "on Tape Device"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Interface"
-msgstr "Èíòćđôćéń"
+msgid "Do nothing"
+msgstr "Íć ïđàâè íèùî"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Configure Internet Access..."
-msgstr "Íàńòđîéêà íà Èíòćđíćò äîńòúïà ..."
+msgid "Delete Client"
+msgstr "Èçòđèâà êëèćíò"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Wait please"
-msgstr ""
+msgid "Filesystem type: "
+msgstr "Âèä ôàéëîâà ńèńòćìà: "
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Èìć íà ńúçäàâàíèÿ ïđîôèë (íîâèÿò ïđîôèë ńć ńúçäàâà êàòî êîïèć íà òćêóùèÿ):"
+msgid "Starting network..."
+msgstr "Ńòàđòèđàíć ìđćæàòà ...."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "New profile..."
-msgstr "Íîâ ïđîôèë ..."
+msgid "Vietnam"
+msgstr "Âèćòíàì"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Profile to delete:"
-msgstr "Ïđîôèë çà èçòđèâàíć:"
+msgid "/_Fields description"
+msgstr "/_Ïîëćòà îïèńàíèć"
-#: ../../standalone/drakconnect:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "Del profile..."
-msgstr "Èçòđîé ïđîôèë ..."
+msgid "Optimize your security by using Mandrake Linux"
+msgstr "Îïòèìèçèđà âàűàòà ńèăóđíîńò"
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Íàńòđîéêà íà ìđćæàòà (%d àäàïòćđà)"
+msgid "Help"
+msgstr "Ïîìîù"
-#: ../../standalone/drakedm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
+msgid "Your personal phone number"
+msgstr "Ëèśíèÿ âè òćëćôîíćí íîìćđ"
-#: ../../standalone/drakedm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Choosing a display manager"
-msgstr "Èçáîđ íà ìćíèäæúđ íà äèńïëćé"
+msgid "Which size do you want to keep for Windows on"
+msgstr "Êîëêî èńêàòć äà îńòàâèòć çà windows?"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
msgstr ""
-"Íćìîæć äà ńć çàòâîđè ïđàâèëíî mkbootdisk: \n"
-" %s \n"
-" %s"
+"Òćńòîâèòć ńòđàíèöè ńà èçïđàòćíè êúì ïđèíòćđíà.\n"
+"Ìîæć äà îòíćìć ìàëêî âđćìć ïđćäè ïđèíòćđà äà çàïîśíć.\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unable to fork: %s"
-msgstr "Íć ìîăà äà íàïđàâÿ 'fork': %s"
+msgid "Username required"
+msgstr "Èçèńêâà ïîòđćáèòćëńêî èìć"
-#: ../../standalone/drakfloppy:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
msgstr ""
-"Íÿìà íîńèòćë â óńòîéńòâîòî èëè ć çàùèòćíà îò ïèńàíć %s.\n"
-"Ìîëÿ ïîńòàâćòć ćäèí."
+"Îáèêíîâćíî, DrakX áè òđÿáâàëî äà èçáćđć ïđàâèëíàòà çà âàń êëàâèàòóđà (â "
+"çàâèńèìîńò\n"
+"îò ćçèêà, êîéòî ńòć èçáđàëè) è íÿìà äà ńć íàëîæè äà âèäèòć òàçè ńòúïêà. "
+"Îáàść ìîæć äà\n"
+"íÿìàòć êëàâèàòóđà ńúîòâćòńòâàùà òîśíî íà âàűèÿ ćçèê: íàïđèìćđ, àêî ńòć "
+"àíăëîăîâîđÿù űâćä,\n"
+"ìîæć áè ùć èńêàòć êëàâèàòóđàòà âè äà áúäć űâćäńêà. Èëè àêî ăîâîđèòć "
+"aíăëèéńêè, íî ńòć\n"
+"â Êâćáćê, ìîæć áè ùć ńòć â ńúùàòà ńèòóàöèÿ. È â äâàòà ńëóśàÿ, ùć òđÿáâà äà "
+"ńć âúđíćòć\n"
+"êúì òàçè èíńòàëàöèîííà ńòúïêà è äà èçáćđćòć ïđàâèëíàòà êëàâèàòóđà îò "
+"ńïèńúêà.\n"
+"\n"
+"Âńèśêî, êîćòî òđÿáâà äà íàïđàâèòć, ć äà ïîńîśèòć ïđćäïîśèòàíàòà êëàâèàòóđíà "
+"íàđćäáà\n"
+"îò ńïèńúêà, êîéòî ùć ńć ïîÿâè ïđćä âàń.\n"
+"\n"
+"Àêî èìàòć êëàâèàòóđà îò ćçèê đàçëèśćí îò òîçè èçïîëçâàí ïî ïîäđàçáèđàíć, "
+"öúêíćòć\n"
+"íà áóòîíà \"Íàïđćäíèśàâ\". Ùć âè áúäć ïđćäîńòàâćí ïúëćí ńïèńúê ń "
+"ïîääúđæàíèòć êëàâèàòóđè."
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "Ïđîâćđćòć èìàòć ëè äèńêćòà â óńòđîéńòâîòî %s"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "Íàńòđîéêè íà SMB (Windows 9x/NT) ïđèíòćđ"
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Build the disk"
-msgstr "Ńúçäàé äèńêúò"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Ïîçâîëÿâà/Çàáđàíÿâà ńúîáùćíèÿ çà IPv4 ăđćűêè."
#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Output"
-msgstr "Đćçóëòàò"
+msgid "mkinitrd optional arguments"
+msgstr "mkinitrd äîïúëíèòćëíè àđăóìćíòè"
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Remove a module"
-msgstr "Ïđćìàőíè ìîäóëà"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Add a module"
-msgstr "Äîáàâè ìîäóëà"
+msgid "Protocol for the rest of the world"
+msgstr "Ïđîòîêîë çà îńòàíàëèÿ ńâÿò"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "omit scsi modules"
-msgstr "áćç scsi ìîäóëè"
+msgid "Print test pages"
+msgstr "Îòïćśàòâàíć íà òćńòîâè ńòđàíèöè"
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if needed"
-msgstr "àêî ć íóæíî"
+msgid "64 MB or more"
+msgstr "64 ÌÁ èëè ïîâćść"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "omit raid modules"
-msgstr "áćç raid ìîäóëè"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
+"Ìîëÿ, èçáćđćòć òćńòîâà ńòđàíèöà çà ïćśàò.\n"
+"Çàáćëćæêà: òćńòîâàòà ńòđàíèöà çà ńíèìêà ìîæć äà îòíćìć äîńòà äúëăî\n"
+"âđćìć äà ńć èçïćśàòà è íà ëàçćđíè ïđèíòćđè ń ìàëêî ïàìćò ìîæć âúîáùć\n"
+"äà íć èçëćçć. Â ïîâćśćòî ńëóśàè ć äîńòàòúśíà ńòàíäàđòíà òćńòîâà ńòđàíèöà."
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "force"
-msgstr "ïđèíóäèòćëíî"
+msgid "Please select the device where your %s is attached"
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "mkinitrd optional arguments"
-msgstr "mkinitrd äîïúëíèòćëíè àđăóìćíòè"
+msgid "Not formatted\n"
+msgstr "Íćôîđìàòèđàí\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Expert Area"
-msgstr "Äîïúëíèòćëíè"
+msgid "Periodic Checks"
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "kernel version"
-msgstr "âćđńèÿ íà ÿäđîòî"
+msgid "PXE Server Configuration"
+msgstr "Êîíôèăóđèđàíć íà PXE ńúđâúđ"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "default"
-msgstr "ïî ïîäđàáèđàíć"
+msgid "Backup the system files before:"
+msgstr "Đćçćđâíî êîïèć íà ôàéëîâć ïđćäè:"
-#: ../../standalone/drakfloppy:1
+#: ../../security/level.pm:1
#, c-format
-msgid "General"
-msgstr "Îńíîâíî"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"Òîâà ć ńòàíäàđòíàòà ńèăóđíîńò ïđćïîđúśèòćëíà çà êîìïțòúđ, êîéòî ùć áúäć "
+"èçïîëçâàí äà ńć ńâúđçâà êúì Èíòćđíćò êàòî êëèćíò."
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
#, c-format
-msgid "boot disk creation"
-msgstr "ńúäàâàíć íà ńòàđòèđàùà äèńêćòà"
+msgid "First floppy drive"
+msgstr "Ïúđâî ôëîïè óńòđîéńòâî"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "/File/_Quit"
+msgstr "/Ôàéë/_Èçëèçà"
-#: ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Size"
-msgstr "Ăîëćìèíà"
+msgid "Dvorak"
+msgstr "Äâîđàê"
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Module name"
-msgstr "Èìć íà ìîäóë"
-
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Post Uninstall"
-msgstr "Èçőîä îò èíńòàëàöèîííàòà ïđîăđàìà"
+msgid "Choose the new size"
+msgstr "Èçáćđćòć íîâà ăîëćìèíà"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Remove fonts on your system"
-msgstr "Èçòđèâà űđèôòîâć îò âàűàòà ńèńòćìà"
+msgid "Media class"
+msgstr "Êëàń íîńèòćë"
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Initial tests"
-msgstr "Íàśàëíè òćńòîâć"
+msgid "The %s is not known by this version of Scannerdrake."
+msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Post Install"
-msgstr "Èíńòàëèđàé"
+#: ../../lang.pm:1
+#, c-format
+msgid "Faroe Islands"
+msgstr "Îńòđîâè Ôàđî"
#: ../../standalone/drakfont:1
#, c-format
-msgid "Install & convert Fonts"
-msgstr ""
+msgid "Restart XFS"
+msgstr "Đćńòàđòèđà XFS"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Copy fonts on your system"
-msgstr "Êîïèđà űđèôòîâć íà âàűàòà ńèńòćìà"
+msgid "Add host/network"
+msgstr "Äîáàâÿ őîńò/ìđćæà"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Remove List"
-msgstr "Èçòđèâà ńïèńúê"
+msgid ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Selected All"
-msgstr "Èçáèđà âńèśêî"
+msgid "Please enter the directory to save to:"
+msgstr "Ìîëÿ âćâćäćòć äèđćêòîđèÿòà çà çàïàçâàíć:"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Unselected All"
-msgstr ""
+msgid "Model name"
+msgstr "Èìć íà ìîäćë"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "here if no."
-msgstr ""
+msgid "Albania"
+msgstr "Àëáàíèÿ"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "click here if you are sure."
+msgid "No CDR/DVDR in drive!"
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Install List"
-msgstr "Èíńòàëèđàíć íà ńèńòćìàòà"
+#: ../../lang.pm:1
+#, c-format
+msgid "British Indian Ocean Territory"
+msgstr "Àíăëèéńêè òćđèòîđèè â Èíäèéńêèÿ îêćàí"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
+msgid "Normal Mode"
+msgstr "Íîđìàëćí đćæèì"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
+"Please be sure that the cron daemon is included in your services. \n"
"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Generic Printers"
-msgstr "Ïđèíòćđ"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer connection type"
+msgstr "Òèï íà âđúçêàòà êúì ïđèíòćđà"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Abiword"
-msgstr "Abiword"
+msgid "No network adapter on your system!"
+msgstr "Íÿìàòć ìđćæîâ àäàïòćđ!"
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
+msgid "Network %s"
+msgstr "Ìđćæà %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Ghostscript"
-msgstr ""
+msgid "Malayalam"
+msgstr "Ìàëàéëàì"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Èçáćđćòć ïđèëîæćíèÿòà êîèòî ùć ïîääúđæàò űđèôòîâćòć:"
+msgid "Option %s out of range!"
+msgstr "Îïöèÿòà %s ć èçâúí ăđàíèöèòć !"
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
+msgid "Connect %s"
+msgstr "Ńâúđçâà %s"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Restarting CUPS..."
+msgstr "Đćńòàđòèđà XFS"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "About"
-msgstr "Îòíîńíî"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "Ïćśàòàíć/Ńêàíèđàíć/Ôîòî êàđòèśêè íà ïđèíòćđ \"%s\""
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Font List"
-msgstr "Ńïèńúê űđèôòîâć"
+msgid "Duplicate mount point %s"
+msgstr "Äóáëèđàé òîśêàòà íà ìîíòèđàíć %s"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Advanced Options"
-msgstr "Äîïúëíèòćëíè îïöèè"
+msgid "if set to yes, run chkrootkit checks."
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Uninstall Fonts"
-msgstr "Èíńòàëèđà űđèôòîâć"
+msgid "Connection Configuration"
+msgstr "Íàńòđîéêà íà âđúçêàòà"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Get Windows Fonts"
-msgstr "Âçèìà űđèôòîâć íà Windows"
+msgid "Unknown|Generic"
+msgstr "Íćèçâćńòćí|Îáù"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1
#, c-format
-msgid "Import Fonts"
-msgstr "Èìïîđòèđò íà űđèôòîâć"
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "done"
-msgstr "ăîòîâî"
+msgid "Quit"
+msgstr "Èçőîä"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "xfs restart"
-msgstr "xfs đćńòàđòèđà"
+msgid "Myanmar"
+msgstr "Ìèàíìàđ"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Suppress Fonts Files"
-msgstr ""
+msgid "Auto allocate"
+msgstr "Àâòîìàòèśíî ńúçäàâàíć"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restart XFS"
-msgstr "Đćńòàđòèđà XFS"
+msgid "Check bad blocks?"
+msgstr "Ïđîâćđêà çà ëîűè ńćêòîđè ?"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Suppress Temporary Files"
-msgstr ""
+msgid "Other MultiMedia devices"
+msgstr "Äđóăà ìóëòèìćäèéíè óńòđîéńòâà"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "type1inst building"
-msgstr ""
+msgid "No remote machines"
+msgstr "Íÿìà îòäàëćśćíè ìàűèíè"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "pfm fonts conversion"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
+"\n"
+"Äîáđć äîűëè íà Ìàăüîńíèêà çà êîíôèăóđèđàíć íà Ïđèíòćđ\n"
+"\n"
+"Òàé ùć âè ïîìîăíć äà èíńòàëèđàòć âàűèòć ïđèíòćđè ńâúđçàíè êúì êîìïțòúđà.\n"
+"\n"
+"Àêî èìàòć ïđèíòćđ(è) ńâúđçàíè êúì òàçè ìàűèíà, âêëțśćòć ăè, òàêà ść òć äà "
+"ìîăàò äà ńć êîíôèăóđèđàò àâòîìàòèśíî.\n"
+"\n"
+"Öúêíćòć íà \"Ńëćäâàùî\" êîăàòî ńòć ăîòîâè, è íà \"Ïđćêúńâà\" àêî íć èńêàòć "
+"äà íàńòđîéâàòć ïđèíòćđèòć ńćăà."
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "ttf fonts conversion"
-msgstr ""
+msgid "Authentication NIS"
+msgstr "NIS èäćíòèôèêàöèÿ"
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Ghostscript referencing"
-msgstr ""
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr "Îïöèÿòà ``Îăđàíèśè îïöèèòć îò êîìàíäíèÿ đćä'' ć áćçïîëćçíà áćç ïàđîëà"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Fonts conversion"
-msgstr ""
+msgid "Internet Connection Sharing currently enabled"
+msgstr "Ńïîäćëÿíćòî íà âđúçêàòà êúì Èíòćđíćò ć âćść àêòèâèđàíî"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "True Type install done"
-msgstr ""
+msgid "Card IO_0"
+msgstr "IO_0 íà êàđòàòà"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr ""
+msgid "United Arab Emirates"
+msgstr "Îáćäèíćíè Àđàáńêè Ćìèđńòâà"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "True Type fonts installation"
-msgstr "Èíńòàëèđàíć íà True Type űđèôòîâć"
+msgid "Card IO_1"
+msgstr "IO_1 íà êàđòàòà"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Fonts copy"
-msgstr "Êîïèđà űđèôòîâć"
+msgid "Thailand"
+msgstr "Òàéëàíä"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Search for fonts in installed list"
-msgstr ""
+msgid "Routers:"
+msgstr "Đóòćđè:"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "could not find any font.\n"
-msgstr ""
+msgid "Kazakhstan"
+msgstr "Êàçàőńòàí"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Reselect correct fonts"
+msgid "Display all available remote CUPS printers"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../install_steps_newt.pm:1
#, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr ""
+msgid "Mandrake Linux Installation %s"
+msgstr "Èíńòàëàöèÿ íà Mandrake Linux %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "no fonts found"
-msgstr "íÿìà íàìćđćíè űđèôòîâć"
+msgid "Thai keyboard"
+msgstr "Òàéâàíńêà êëàâèàòóđà"
-#: ../../standalone/drakfont:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "parse all fonts"
-msgstr ""
+msgid "Dialup options"
+msgstr "Îïöèè çà èçáèđàíć ïî òćëćôîí"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unselect fonts installed"
-msgstr ""
+msgid "Bouvet Island"
+msgstr "Îńòđîâ Áóâćò"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Search installed fonts"
+msgid "If no port is given, 631 will be taken as default."
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
+"Change your Cd-Rom!\n"
"\n"
-"Click on Configure to launch the setup wizard."
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
-"Äîáđć äîűëè â èíńòđóìćíòà çà ńïîäćëÿíć íà Èíòćđíćò âđúçêàòà !\n"
-"\n"
-"%s\n"
+"Ńìćíćòć CD-ROM !\n"
"\n"
-"Öúêíćòć ``Íàńòđîé'', àêî èńêàòć äà ńòàđòèđàíć óńòàíîâÿâàùèÿ ìàăüîńíèê."
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "Íàńòđîéêà íà ńïîäćëÿíćòî íà Èíòćđíćò âđúçêàòà"
+"Ìîëÿ, ńëîæćòć CD-ROM îçàăëàâćí \"%s\" â óńòđîéńòâîòî è íàòèńíćòć Ok, êîăàòî "
+"ńòć ăîòîâè.\n"
+"Àêî ăî íÿìàòć, íàòèńíćòć Îòìÿíà, çà äà èçáćăíćòć èíńòàëèđàíćòî îò òîçè CD-"
+"ROM."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Íÿìà íàńòđîéâàíî ńïîäćëÿíć íà Èíòćđíćò âđúçêàòà."
+msgid "Polish"
+msgstr "Ïîëńêà"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Óńòàíîâêàòà âćść ć íàïđàâćíà è â ìîìćíòà ć âêëțśćíà."
+msgid "Mandrake Online"
+msgstr "Mandrake Online"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Óńòàíîâêàòà âćść ć íàïđàâćíà, íî â ìîìćíòà ć èçêëțśćíà."
+msgid "\t-Network by webdav.\n"
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
msgstr ""
-"Âńèśêî ć íàńòđîćíî.\n"
-"Ńćăà ìîæćòć äà ńïîäćëèòć Èíòćđíćò âđúçêàòà ńè ń äđóăè êîìïțòđè â ëîêàëíàòà "
-"âè ìđćæà èçïîëçâàéêè àâòîìàòèśíà ìđćæîâà íàńòđîéêà (DHCP)."
+"Â ńèńòćìàòà íć ć îòêđèò ethernet ìđćæîâ àäàïòćđ. Ìîëÿ, ńòàđòèđàéòć "
+"èíńòđóìćíòà çà íàńòđîéêà íà őàđäóćđ."
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Problems installing package %s"
-msgstr "Ïđîáëćìè ń èíńòàëèđàíćòî íà ïàêćòà %s"
+msgid "Netmask"
+msgstr "Ìđćæîâà ìàńêà"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Íàńòđîéâàùè ńêđèïòîâć, èíńòàëèđàíć íà ńîôòóćđ, ńòàđòèđàíć íà ńúđâúđè..."
+msgid "No hard drives found"
+msgstr "Íć ć íàìćđćí òâúđä äèńê"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring..."
-msgstr "Íàńòđîéêà ..."
+msgid "Logitech CC Series"
+msgstr "Logitech CC Series"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Âúçìîæćí êîíôèêò ń àäđćńèòć â LAN ń íàńòđîéêàòà íà %s!\n"
+msgid "2 buttons"
+msgstr "2 áóòîíà"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
+msgid "What kind is your ISDN connection?"
+msgstr "Êàêúâ ć òèïúò íà ISDN âđúçêàòà ?"
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr ""
+msgid "Label"
+msgstr "Ćòèêćò"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr ""
+msgid "Save on floppy"
+msgstr "Çàïàçè íà äèńêćòà"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The default lease (in seconds)"
-msgstr ""
+msgid "Printer auto-detection"
+msgstr "Àâòîìàòèśíî îòêđèâà ïđèíòćđ"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The DHCP end range"
-msgstr ""
+msgid "Which of the following is your ISDN card?"
+msgstr "Êîÿ îò ńëćäíèòć ISDN êàđòàòè ć âàűàòà ?"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
-msgid "The DHCP start range"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
msgstr ""
+"NFS ć ïîïóëÿđćí ïđîòîêîë çà îáìćí íà ôàéëîâć ïî TCP/IP ìđćæè.\n"
+"Òàçè óńëóăà îńèăóđÿâà ôóíêöèîíàëíîńòòà íà NFS ńúđâúđà, êîéòî ńć íàńòđîéâà\n"
+"śđćç ôàéëà /etc/exports."
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "The internal domain name"
-msgstr "Íîâî èìć íà ïđèíòćđ"
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Msec"
+msgstr "Ìńćê"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "The DNS Server IP"
-msgstr "DNS ńúđâúđ IP"
+msgid ""
+"=> Notice, a label changed:\n"
+"%s"
+msgstr ""
+"=> çàáćëćæêà, ïđîìćíćí ćòèêćò:\n"
+"%s"
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "(Òîçè) DHCP ńúđâúđ IP"
+msgid "Number of capture buffers:"
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
+msgid "Your choice? (0/1, default `%s') "
+msgstr "Âàűèÿò èçáîđ ? (ïî ïîäđàçáèđàíć ć `%s')"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"DHCP Server Configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
+"\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
+"\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
+"\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
"\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
msgstr ""
+"Âńèśêè íîâîäćôèíèđàíè äÿëîâć òđÿáâà äà áúäàò ôîđìàòèđàíè, çà äà ńć "
+"èçïîëçâàò\n"
+"(ôîđìàòèđàíć îçíàśàâà ńúçäàâàíć íà ôàéëîâà ńèńòćìà).\n"
+"\n"
+"Â òîçè ìîìćíòà ìîæć áè èńêàòć äà ïđćôîđìàòèđàòć íÿêîè ńúùćńòâóâàùè äÿëîâć, "
+"çà\n"
+"äà èçòđèćòć âńÿêàêâè äàííè, êîèòî ńúäúđæàò. Àêî èńêàòć äà ăî íàïđàâèòć, "
+"ìîëÿ\n"
+"èçáćđćòć òÿő.\n"
+"\n"
+"Ìîëÿ, îòáćëćæćòć, ść íć ć íćîáőîäèìî äà ïđćôîđìàòèđàòć âńèśêè äÿëîâć\n"
+"ńúùćńòâóâàùè îòïđćäè. Òđÿáâà äà ïđćôîđìàòèđàòć äÿëîâćòć ńúäúđæàùè\n"
+"îïćđàöèîííàòà ńèńòćìà (êàòî \"/\", \"/usr\" èëè \"/var\"), íî òîâà íć ć\n"
+"çàäúëæèòćëíî çà äÿëîâć ńúäúđæàùè äàííè, êîèòî èńêàòć äà çàïàçèòć "
+"(îáèêíîâćíî\n"
+"\"/home\").\n"
+"\n"
+"Ìîëÿ, áúäćòć âíèìàòćëíè, êîăàòî èçáèđàòć äÿëîâćòć. Ńëćä ôîđìàòèđàíć âńèśêè\n"
+"äàííè íà ïîńîśćíèòć äÿëîâć ùć áúäàò èçòđèòè è íÿìà äà ìîæćòć äà ăè\n"
+"âúçńòàíîâèòć.\n"
+"\n"
+"Öúêíćòć \"OK\", êîăàòî ńòć ăîòîâè äà ôîđìàòèđàòć äàëîâć.\n"
+"\n"
+"Öúêíćòć \"Îòêàç\", àêî èńêàòć äà èçáćđćòć äđóăè äÿëîâć çà èíńòàëàöèÿ íà "
+"íîâàòà\n"
+"ńè Mandrake Linux îïćđàöèîííà ńèńòćìà.\n"
+"\n"
+"Öúêíćòć \"Íàïđćäíèśàâ\", àêî èńêàòć äà èçáćđćòć äÿëîâć, êîèòî äà áúäàò\n"
+"ïđîâćđćíè çà ëîűè áëîêîâć îò äèńêà."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Local Network adress"
-msgstr "Àäđćń íà Ëîêàëíà ìđćæà"
+msgid "French"
+msgstr "Ôđćíńêà"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
-"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
-"\n"
-msgstr ""
+msgid "Czech (QWERTY)"
+msgstr "Śćűêà (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
+#, c-format
+msgid "Hardware probing in progress"
+msgstr "Ïđîăđćń íà őàđäóćđíà ïđîáà"
#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Net Device"
+msgstr "Xinetd îáńëóæâàíć"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Summary"
+msgstr "Îáîáùćíèć"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
+" (Ïàđàëćëíè ïîđòîâć: /dev/lp0, /dev/lp1, ..., ńúîòâćòńâàùè íà LPT1:, "
+"LPT2:, ..., 1-âè USB ïđèíòćđ: /dev/usb/lp0, 2-đè USB ïđèíòćđ: /dev/usb/"
+"lp1, ...)."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Current interface configuration"
-msgstr "Êîíôèăóđàöèÿ íà òćêóùèÿò èíòćđôćéń"
+msgid "Next"
+msgstr "Ńëćäâàù"
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Show current interface configuration"
-msgstr "Ïîêàçâà êîíôèăóđàöèÿ íà òćêóùèÿò èíòćđôćéń"
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "Íć ìîæćòć äà èíńòàëèđàòć bootloader íà äÿëà %s\n"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "No (experts only)"
-msgstr ""
+msgid "CHAP"
+msgstr "CHAP"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Automatic reconfiguration"
-msgstr "Àâòîìàòèśíà đćêîíôèăóđàöèÿ"
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp/zeroconf)"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
"\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
"\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
+"\n"
+"Äîáđć äîűëè.\n"
+"\n"
+"Ïàđàìćòđèòć çà àâòîèíńòàëàöèÿ ńà íàëèśíè â ńćêöèÿòà â ëÿâî"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface already configured"
-msgstr "Ìđćæîâèÿò èíòćđôćéń âćść ć êîíôèăóđèđàí"
+msgid "Puerto Rico"
+msgstr "Ïóćđòî Đèêî"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""
-"Ìîëÿ èçáćđćòć êîé ìđćæîâ àäàïòćđ äà áúäć âêëțśćí êúì ëîêàëíàòà âè ìđćæà."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "Ëèòâèéńêà \"śèńëîâà đćäèöà\" QWERTY"
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
-"%s\n"
"\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
msgstr ""
-"Â ńèńòćìàòà âè èìà ńàìî ćäèí íàńòđîćí ìđćæîâ àäàïòćđ:\n"
+"Ńëćäíèòć ïàêćòè ùć áúäàò èçòđèòè çà äà ńć ïîçâîëè îáíîâÿâàíć íà ńèńòćìàòà: %"
+"s\n"
"\n"
-"%s\n"
"\n"
-"Ńìÿòàì äà óńòàíîâÿ ëîêàëíàòà âè ìđćæà íà òîçè àäàïòćđ."
+"Äćéńòâèòćëíî ëè èńêàòć äà èçòđèćòć òćçè ïàêćòè?\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface"
-msgstr "Ìđćæîâ èíòćđôćéń"
+msgid "Anguilla"
+msgstr "Àíăèëà"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "NIS Domain"
+msgstr "NIS äîìćéí"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
+"\n"
+"- User Files:\n"
msgstr ""
-"Â ńèńòćìàòà íć ć îòêđèò ethernet ìđćæîâ àäàïòćđ. Ìîëÿ, ńòàđòèđàéòć "
-"èíńòđóìćíòà çà íàńòđîéêà íà őàđäóćđ."
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "No network adapter on your system!"
-msgstr "Íÿìàòć ìđćæîâ àäàïòćđ!"
+msgid "Antarctica"
+msgstr "Àíòàđêòèêà"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Interface %s"
-msgstr "Èíòćđôćéń %s"
+msgid "Mount options"
+msgstr "Îïöèè çà mount:"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Èíòćđôćéń %s (èçïîëçâàù ìîäóë %s)"
+msgid "Jamaica"
+msgstr "ßìàéêà"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, fuzzy, c-format
-msgid "Net Device"
-msgstr "Xinetd îáńëóæâàíć"
-
-#: ../../standalone/drakgw:1
-#, c-format
msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
+"Ńâúđæè śèńòè äđàéâćđè ń áëîêîâè óńòđîéńòâà (êàòî äÿëîâć\n"
+"íà òâúđäèÿ äèńê), çà óïîòđćáÿòà îò ïđèëîæćíèÿ êàòî Oracle"
-#: ../../standalone/drakgw:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
msgstr ""
-"Íà ïúò ńòć äà íàńòđîèòć êîìïțòúđà ńè òàêà, ść äà ïîäćëÿ Èíòćđíćò âđúçêàòà\n"
-"ńè. Ń òàçè âúçìîæíîńò, äđóăè êîìïțòđè â ëîêàëíàòà âè ìđćæà ùć ìîăàò äà\n"
-"èçïîëçâàò Èíòćđíćò âđúçêàòà íà òîçè êîìïțòúđ.\n"
-"\n"
-"Óáćäćòć ńć, ść âèć ńòć êîíôèăóđèđàëè âàűàòà Ìđćæà/Èíòćđíćò äîńòúï "
-"èçïîëçâàéêè drakconnect ïđćäè äà ïđàâèòć äđóăî.\n"
-"\n"
-"Îòáćëćæćòć: òđÿáâà âè îòäćëćí çà òîâà ìđćæîâ àäàïòćđ, çà äà óńòàíîâèòć "
-"âúòđćűíàòà ńè ìđćæà (LAN)."
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Ńïîäćëÿíć íà âđúçêàòà ń Èíòćđíćò"
-
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Ńïîäćëÿíćòî íà Èíòćđíćò â ìîìćíòà ć âêëțśćíî."
+msgid "Please wait, preparing installation..."
+msgstr "Ìîëÿ, èçśàêàéòć, ïîäăîòâÿíć íà èíńòàëàöèÿòà"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Enabling servers..."
-msgstr "Âêëțśâàíć íà ńúđâúđè ..."
+msgid "Czech (QWERTZ)"
+msgstr "Śćűêà (QWERTZ)"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "dismiss"
-msgstr "îńòàâè"
+msgid "Track network card id (useful for laptops)"
+msgstr "Ïđîńëćäÿâàíć íà ID íà ìđćæîâàòà êàđòà (ïîëćçíî ïđè ëàïòîïè)"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "reconfigure"
-msgstr "ïđćíàńòđîéêà"
+msgid "The port number should be an integer!"
+msgstr "Íîìćđúò íà ïîđòà òđÿáâà äà ć öÿëî śèńëî !"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "enable"
-msgstr "âêëțśè"
+msgid "You must choose an image file first!"
+msgstr "Âèć òđÿáâà äà èçáćđćòć ïúđâî ăđàôèśćí ôàéë!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Óńòàíîâêàòà íà Ńïîäćëÿíćòî íà Èíòćđíćò âđúçêàòà ć âćść çàâúđűćíà.\n"
-"Â ìîìćíòà ć èçêëțśćíà.\n"
-"\n"
-"Êàêâî èńêàòć äà íàïđàâèòć ?"
+msgid "Restore from Hard Disk."
+msgstr "Âúçńòàíîâÿâà îò òâúđä äèńê."
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Ńïîäćëÿíćòî íà Èíòćđíćò âđúçêàòà ć èçêëțśćíî."
+msgid "Add to LVM"
+msgstr "Ïđèáàâè êúì LVM"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Ńïîäćëÿíćòî íà Èíòćđíćò âđúçêàòà â ìîìćíòà ć èçêëțśćíî."
+msgid "DNS server"
+msgstr "DNS ńúđâúđ"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Disabling servers..."
-msgstr "Èçêëțśâàíć íà ńúđâúđè ..."
+msgid "Trinidad and Tobago"
+msgstr "Òđèíèäàä è Òîáàăî"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "disable"
-msgstr "èçêëțśè"
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr "LPD è LPRng íć ïîääúđæà IPP ïđèíòćđè.\n"
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Óńòàíîâêàòà íà Ńïîäćëÿíćòî íà Èíòćđíćò âđúçêàòà ć çàâúđűćíà.\n"
-"Â ìîìćíòà ć âêëțśćíà.\n"
-"\n"
-"Êàêâî èńêàòć äà íàïđàâèòć ?"
+msgid "simple"
+msgstr "ïđîńò"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Ńïîäćëÿíćòî íà âđúçêàòà êúì Èíòćđíćò ć âćść àêòèâèđàíî"
+msgid "Clear all"
+msgstr "Èçśèńòè âńèśêî"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
-msgstr ""
+msgid "No test pages"
+msgstr "Áćç òćńòîâè ńòđàíèöè"
-#: ../../standalone/drakhelp:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
-msgstr ""
+msgid "Adapter %s: %s"
+msgstr "Àäàïòćđ %s: %s"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Path"
-msgstr "Ïúò"
+msgid "Falkland Islands (Malvinas)"
+msgstr "Ôîëêëćíäńêè Îńòđîâè (Ìàëâèíè)"
-#: ../../standalone/drakperm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "group :"
-msgstr "ăđóïà :"
+msgid "Unknown model"
+msgstr "Íćèçâćńòćí ìîäćë"
-#: ../../standalone/drakperm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "user :"
-msgstr "Ïîòđćáèòćë:"
+msgid "if set to yes, check files/directories writable by everybody."
+msgstr ""
+"àêî ć çàäàćíî äà, ïđîâćđÿâà ôàéëîâćòć/äèđćêòîđèèòć äîńòúïíè çà ïèńàíć îò "
+"âńćêè."
-#: ../../standalone/drakperm:1
-#, c-format
-msgid "Path selection"
-msgstr "Èçáîđ íà ïúò"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "authentication"
+msgstr "Èäćíòèôèêàöèÿ"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "when checked, owner and group won't be changed"
-msgstr "ïđè ïđîâćđêà, ńîáńòâćíèêà è ăđóïàòà íÿìà äà áúäàò ïđîìćíćíè"
+msgid "Backup Now"
+msgstr "Đćçćđâíî êîïèć ńćăà"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Use group id for execution"
-msgstr "Èçïîëçâà id íà ăđóïà ïđè èçïúëíćíèć"
+msgid "/_File"
+msgstr "/_Ôàéë"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use owner id for execution"
-msgstr "Èçïîëçâà id íà ńîáńòâćíèê ïđè èçïúëíćíèć"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Ïđćìàőâàì ïđèíòćđ îò Star Office/OpenOffice.org/GIMP"
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
msgstr ""
+"Âêëțśè ôèëòđèđàíćòî íà ïàêćòè çà Linux ÿäđà ńćđèÿ 2.2, çà\n"
+"íàńòđîêà íà çàùèòíàòà ńòćíà, s cel çàùèòàâà íà ìàűèíàòà âè îò\n"
+"ìđćæîâè àòàêè."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Set-GID"
-msgstr "Çàäàâà-GID"
+msgid "Tamil (ISCII-layout)"
+msgstr "Òàìèëńêà (ISCII-ïîäđćäáà)"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Set-UID"
-msgstr "Çàäàâà-UID"
+msgid "Mayotte"
+msgstr "Ìàéîò"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "sticky-bit"
-msgstr "sticky-áèò"
+msgid "Creating auto install floppy..."
+msgstr "Ïîäăîòâÿì äèńêćòà ń àâòîìàòèśíà èíńòàëàöèÿ"
-#: ../../standalone/drakperm:1
-#, c-format
-msgid "Property"
-msgstr "Ńîáńòâćíîńò"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Searching for scanners ..."
+msgstr "Ëîêàëćí ïđèíòćđ"
-#: ../../standalone/drakperm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Permissions"
-msgstr "Ïđàâà"
+msgid "Partitioning"
+msgstr "Đàçäćëÿíć íà äÿëîâć"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Current user"
-msgstr "Òćêóù ïîòđćáèòćë"
+msgid "Russia"
+msgstr "Đóńèÿ"
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "browse"
-msgstr "ïđćăëćä"
+msgid "ethernet card(s) detected"
+msgstr "ethernet êàđòè çàńćśćíè"
-#: ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Edit current rule"
-msgstr "Đćäàêòèđà òćêóùîòî ïđàâèëî"
+msgid "Syslog"
+msgstr "Ńèńòćìćí æóđíàë"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "edit"
-msgstr "đćäàêòèđà"
+msgid "Can't create catalog!"
+msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Delete selected rule"
-msgstr "Èçòđèâà èçáđàíîòî ïđàâèëî"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
+msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "delete"
-msgstr "èçòđèâà"
+msgid "Not enough free space for auto-allocating"
+msgstr "Íÿìà äîńòàòúśíî ìÿńòî çà àâòîìàòèśíî đàçïđćäćëÿíć"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add a new rule at the end"
-msgstr "Äîáàâÿ íîâî ïđàâèëî íà êđàÿ"
+msgid "Set root password"
+msgstr "Âúâćäćòć ïàđîëà çà root"
-#: ../../standalone/drakperm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "add a rule"
-msgstr "äîáàâÿ ïđàâèëî"
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
+msgstr ""
+"Íÿìà ńâîáîäćí äđàéâćđ çà âàűàòà çâóêîâà êàđòà (%s), íî èìà ńîáńòâćíè äđàéâćđ "
+"íà \"%s\"."
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Move selected rule down one level"
-msgstr "Ïđćìćńòâà èçáđàíîòî ïđàâèëî ćäíî íèâî íàäîëó"
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr ""
+"Ńëćä ïđîìÿíà ăîëćìèíàòà íà äÿëà %s, äàííète âúđőó íćăî ùć áúäàò çàăóáćíè"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Down"
-msgstr "Äîëó"
+msgid "Internet connection configuration"
+msgstr "Íàńòđîéêà íà Èíòćđíćò âđúçêà"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Move selected rule up one level"
+msgid "Scanning for TV channels"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Up"
+msgid "Kernel:"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "select perm file to see/edit"
-msgstr ""
+msgid "/_About..."
+msgstr "/_Îòíîńíî..."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
+msgid "Bengali"
+msgstr "Áćíăàëńêà"
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "permissions"
-msgstr "ïđàâà"
+msgid "Preference: "
+msgstr "Ïđćäïîśèòàíèć: "
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "group"
-msgstr "ăđóïà"
+msgid "Wizard..."
+msgstr "Ìàăüîńíèê..."
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "user"
-msgstr "Ïîòđćáèòćë"
+msgid "Services: %d activated for %d registered"
+msgstr "Óńëóăè: %d àêòèâèđàíè îò %d đćăèńòđèđàíè"
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1
#, c-format
-msgid "path"
-msgstr ""
+msgid "Create a bootdisk"
+msgstr "Ńúçäàâàíć íà boot-äèńêćòà"
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Ìćńòîïîëîæćíèć íà auto_install.cfg ôàéë"
+msgid "Solomon Islands"
+msgstr "Ńîëîìîíîâè Îńòđîâè"
-#: ../../standalone/drakpxe:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
+msgid "(module %s)"
+msgstr "(ìîäóë %s)"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
+msgid "Workgroup"
+msgstr "Đàáîòíà ăđóïà"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer host name or IP"
+msgstr "Èìć íà őîńò çà ïđèíòćđà èëè IP"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Host Path or Module"
msgstr ""
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "No image found"
-msgstr "Ëîêàëćí ïđèíòćđ"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Name of printer should contain only letters, numbers and the underscore"
+msgstr "Èìćòî íà ïđèíòćđà òđÿáâà äà ńúäúđæà ńàìî áóêâè, śèńëà è ïîäśćđòàâêà"
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Installation image directory"
-msgstr "Xpmac (èíńòàëàöèÿ ăđàôèśćí äđàéâćđ)"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Show current interface configuration"
+msgstr "Ïîêàçâà êîíôèăóđàöèÿ íà òćêóùèÿò èíòćđôćéń"
-#: ../../standalone/drakpxe:1
+#: ../../help.pm:1
#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
+msgid "Development"
+msgstr "Đàçđàáîòêà"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "The DHCP end ip"
-msgstr ""
+msgid "Done"
+msgstr "Ăîòîâî"
-#: ../../standalone/drakpxe:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "The DHCP start ip"
-msgstr ""
+msgid "Web Server"
+msgstr "Web Ńúđâúđ"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
+msgid "\tDo not include System Files\n"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Èíòćđôćéń %s (íà ìđćæà %s)"
+msgid "Chile"
+msgstr "Śèëè"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
+msgid ""
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
msgstr ""
-"Ìîëÿ, èçáćđćòć êîé ìđćæîâ àäàïòćđ äà èçïîëçâàì çà âđúçêà êúì dhcp ńúđâúđ."
+"Inkjet ïđèíòćđíèòć äđàéâćđè ïđćäîńòàâćíè îò Lexmark ïîääúđæàò ńàìî ëîêàëíè "
+"ïđèíòćđè, áćç ïđèíòćđè íà îòäàëćśćíè ìàűèíè èëè ïđèíòćđíè ìàűèíè. Ìîëÿ, "
+"ńâúđæćòć ïđèíòćđà ńè íà ëîêàëćí ïîđò èëè ăî íàńòđîéòć íà ìàűèíàòà, êúì êîÿòî "
+"ć ńâúđçàí."
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Do not use \"scannerdrake\" for this device!"
msgstr ""
-"Íà ïúò ńòć äà íàńòđîèòć êîìïțòúđà ńè òàêà, ść äà ïîäćëÿ Èíòćđíćò âđúçêàòà\n"
-"ńè. Ń òàçè âúçìîæíîńò, äđóăè êîìïțòđè â ëîêàëíàòà âè ìđćæà ùć ìîăàò äà\n"
-"èçïîëçâàò Èíòćđíćò âđúçêàòà íà òîçè êîìïțòúđ.\n"
-"\n"
-"Îòáćëćæćòć: òđÿáâà âè îòäćëćí çà òîâà ìđćæîâ àäàïòćđ, çà äà óńòàíîâèòć "
-"âúòđćűíàòà ńè ìđćæà (LAN)."
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
#, c-format
-msgid "Installation Server Configuration"
-msgstr "Êîíôèăóđèđàíć íà Èíńòàëàöèîíćí Ńúđâúđ"
+msgid "(already added %s)"
+msgstr "(âćść ïđèáàâèő %s)"
-#: ../../standalone/drakpxe:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "PXE Server Configuration"
-msgstr "Êîíôèăóđèđàíć íà PXE ńúđâúđ"
+msgid ", using command %s"
+msgstr ", èçïîëçâà êîìàíäà %s"
-#: ../../standalone/draksec:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please wait, setting security options..."
-msgstr "Ìîëÿ, èçśàêàéòć, óńòàíîâÿâàì îïöèèòć ïî çàùèòà..."
+msgid "Alt and Shift keys simultaneously"
+msgstr "Alt è Shift êëàâèűè ćäíîâđćìćííî"
-#: ../../standalone/draksec:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Please wait, setting security level..."
-msgstr "Ìîëÿ, èçáćđćòć íèâî íà ńèăóđíîńò..."
+msgid "Flags"
+msgstr "Ôëàăîâć"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Periodic Checks"
+msgid "Add/Del Users"
+msgstr "Äîáàâÿ/Èçòđèâà ïîòđćáèòćëè"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Host/network IP address missing."
msgstr ""
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "System Options"
-msgstr "Ńèńòćìíè îïöèè"
+msgid "weekly"
+msgstr ""
-#: ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Network Options"
-msgstr "Ìđćæîâè îïöèè"
+msgid "Settings"
+msgstr "Íàńòđîéêè"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The entered host/network IP is not correct.\n"
+msgstr "Âúâćäćíèÿò őîńò/ìđćæà IP íć ć ïđàâèëćí.\n"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Here is the full list of available countries"
+msgstr "Ćòî ïúëćí ńïèńúê íà äîńòđúïíèòć ńòđàíè"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Alternative test page (A4)"
+msgstr "Àëòćđíàòèâíà òćńòîâà ńòđàíèöà (À4)"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
+"Àêî èìàòć âńèśêè CD-òà îò ńïèńúêà ïî-ăîđć, íàòèńíćòć Ok.\n"
+"Àêî íÿìàòć íèòî ćäíî îò òćçè CD-òà, íàòèńíćòć Îòìÿíà.\n"
+"Àêî âè ëèïńâàò íÿêîè CD-òà, ìàőíćòć ăè, è íàòèńíćòć Ok. "
-#: ../../standalone/draksec:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Security Administrator:"
-msgstr "Àäìèíèńòđàòîđ ïî çàùèòà:"
+msgid "Wait please"
+msgstr ""
-#: ../../standalone/draksec:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Security Alerts:"
-msgstr "Ïđćäóïđćæäćíèÿ çà çàùèòà:"
+msgid "PAP"
+msgstr "PAP"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Security Level:"
-msgstr "Íèâî íà ńèăóđíîńò:"
+msgid "Backup user files"
+msgstr "Đćçćđâíî êîïèć íà ïîòđćáèòćëńêè ôàéëîâć"
-#: ../../standalone/draksec:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "(default value: %s)"
-msgstr "(ïîäđàçáèđàùà ńòîéíîńò: %s)"
+msgid "New"
+msgstr "Íîâ"
-#: ../../standalone/draksec:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-" to the Internet as a client.\n"
-"\n"
-"High: There are already some restrictions, and more automatic checks "
-"are run every night.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
"\n"
-"Higher: The security is now high enough to use the system as a server "
-"which can accept\n"
-" connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-" should choose a lower level.\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
"\n"
-"Paranoid: This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-" features are at their maximum\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
"\n"
-"Security Administrator:\n"
-" If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-" email)"
-msgstr ""
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
"\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
"\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""
-#: ../../standalone/draksound:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"If you do not know what to choose, stay with the default option."
msgstr ""
+"Â òîçè ìîìćíò, òđÿáâà äà èçáćđćòć íèâîòî íà ńèăóđíîńò, êîćòî èńêàòć çà\n"
+"ìàűèíàòà. Ïî ïđàâèëî, êîëêîòî ïîâćść ìàűèíàòà âè ć äîńòúïíà è êîëêîòî "
+"ïîâćść\n"
+"äàííè ńć ńúőđàíÿâàò íà íćÿ, òîëêîâà ïî-âèńîêî òđÿáâà äà ć íèâîòî íà "
+"ńèăóđíîńò.\n"
+"Âúïđćêè òîâà, âèńîêàòà ńèăóđíîńò ć çà ńìćòêà íà ëćêîòàòà íà đàáîòà.\n"
+"Îáúđíćòć ńć êúì ăëàâàòà MSEC íà Reference Manual, çà äà ïîëóśèòć ïîâćść "
+"èíôîđìàöèÿ\n"
+"çà çíàśćíèćòî íà òćçè íèâà.\n"
+"\n"
+"Àêî íć çíàćòć êàêòî äà èçáćđćòć, èçáćđćòć îïöèÿòà ïî ïîäđàçáèđàíć."
-#: ../../standalone/draksound:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No Sound Card detected!"
-msgstr "Íÿìà íàìćđćíà çâóêîâà êàđòà!"
+msgid "Load from floppy"
+msgstr "Çàđćäè îò äèńêćòà"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "%s BootSplash (%s) preview"
-msgstr ""
+msgid "The following printer was auto-detected. "
+msgstr "Ńëćäíèòć ïđèíòćđè ńà àâòîìàòèśíî îòêđèòè. "
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Generating preview ..."
-msgstr "Ăćíćđèđàì ïđćăëćä..."
+msgid "Boot Floppy"
+msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You must choose an image file first!"
-msgstr "Âèć òđÿáâà äà èçáćđćòć ïúđâî ăđàôèśćí ôàéë!"
+msgid "Norwegian"
+msgstr "Íîđâćæêà"
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Searching for new scanners ..."
+msgstr "Ëîêàëćí ïđèíòćđ"
+
+#: ../../standalone/logdrake:1
#, c-format
-msgid "ProgressBar color selection"
-msgstr "Èçáîđ íà öâÿò çà ëćíòàòà íà ïđîăđćń"
+msgid "Apache World Wide Web Server"
+msgstr "Apache World Wide Web Ńúđâúđ"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
+msgid "stepping of the cpu (sub model (generation) number)"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "saving Bootsplash theme..."
-msgstr ""
+msgid "select path to restore (instead of /)"
+msgstr "èçáîđ íà ïúò çà âúçńòàíîâÿâàíć (âìćńòî /)"
#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "choose image file"
-msgstr "Èçáćđćòć ôàéë"
+msgid "Configure bootsplash picture"
+msgstr "Íàńòđîéêà íà óńëóăèòć"
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "choose image"
-msgstr "Èçáćđćòć ôàéë"
+#: ../../lang.pm:1
+#, c-format
+msgid "China"
+msgstr "Êèòàé"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr " (Óáćäćòć ńć, ść ïđèíòćđèòć ńà ńâúđçàíè è âêëțśćíè).\n"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Georgia"
+msgstr "Ăđóçèÿ"
+
+#: ../../standalone/printerdrake:1
#, fuzzy, c-format
-msgid "Configure bootsplash picture"
-msgstr "Íàńòđîéêà íà óńëóăèòć"
+msgid "Reading data of installed printers..."
+msgstr "Ëîêàëćí ïđèíòćđ"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Make kernel message quiet by default"
+msgid " Erase Now "
+msgstr " Èçòđèâà ńćăà "
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "server"
+msgstr "ńúđâúđ"
+
+#: ../../install_any.pm:1
+#, c-format
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "Ńëîæćòć FAT ôîđìàòèđàíà äèńêćòà â óńòđîéńòâî %s"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "yes means the processor has an arithmetic coprocessor"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Display logo on Console"
-msgstr "Ïîêàçâà ëîăî íà Êîíçîëà"
+msgid "Please Wait... Applying the configuration"
+msgstr "Ìîëÿ, ïîśàêàéòć ... Ïđèëàăàíć íà íàńòđîéêèòć"
-#: ../../standalone/draksplash:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "Choose color"
-msgstr "Èçáćđîđ íà öâÿò"
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Äîáđć äîűëè â GRUB ,çà èçáîđ íà îïćđàöèîííàòà ńèńòćìà!"
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Save theme"
-msgstr "Çàïàçâà òćìà"
+msgid "Grub"
+msgstr "Grub"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Preview"
-msgstr "Ïđćăëćä"
+msgid "SCSI controllers"
+msgstr "SCSI êîíòđîëćđè"
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "the color of the progress bar"
-msgstr "öâćòúò íà ëćíòàòà çà ïđîăđćń"
+msgid " on LPD server \"%s\", printer \"%s\""
+msgstr " íà LPD ńúđâúđ \"%s\", ïđèíòćđ \"%s\""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
#, c-format
-msgid "the height of the progress bar"
-msgstr "âèńîśèíàòà íà ëćíòàòà çà ïđîăđćń"
+msgid "Choosing a display manager"
+msgstr "Èçáîđ íà ìćíèäæúđ íà äèńïëćé"
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Zeroconf Host name"
+msgstr "Èìć íà őîńò:"
+
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "the width of the progress bar"
-msgstr "űèđèíàòà íà ëćíòàòà çà ïđîăđćń"
+msgid "IP address should be in format 1.2.3.4"
+msgstr "IP àäđćńúò òđÿáâà äà áúäć âúâ ôîđìàò 1.2.3.4"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-"ëćíòàòà çà ïđîăđćń y êîîđäèíàòè\n"
-"îò ăîđíèÿò ëÿâ úăúë"
+msgid "Ecuador"
+msgstr "Ćêâàäîđ"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-"ëćíòàòà çà ïđîăđćń x êîîđäèíàòè\n"
-"îò ăîđíèÿò ëÿâ úăúë"
+msgid "Add an item"
+msgstr "Äîáàâÿíć íà îáćêò"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "text box height"
-msgstr "âèńîśèíà íà đàìêà çà òćêńò"
+msgid "The printers on this machine are available to other computers"
+msgstr "Ïđèíòćđèòć íà òàçè ìàűèíà ń äîńòúïíè çà äđóăèòć êîìïțòđè"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "text width"
-msgstr "űèđèíà íà òćêńò"
+msgid "I can't find needed image file `%s'."
+msgstr "Íć ìîăà äà íàìćđÿ íóæíà êàđòèíêà `%s'."
-#: ../../standalone/draksplash:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"y êîîđäèíàòè íà òćêńòîâàòà đàìêà\n"
-"â áđîé ńèìâîëè"
+msgid "No sound card detected. Try \"harddrake\" after installation"
+msgstr "Íÿìà îòêđèòà çâóêîâà êàđòà. Îïèòàéòć \"harddrake\" ńëćä èíńòàëàöèÿòà"
-#: ../../standalone/draksplash:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"x coordinate of text box\n"
-"in number of characters"
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
msgstr ""
-"x êîîđäèíàòè íà òćêńòîâàòà đàìêà\n"
-"â áđîé ńèìâîëè"
+"Çàäàäćí ć ăđćűćí ïîđò: %s.\n"
+"Ôîđìàòúò ć \"port/tcp\" èëè \"port/udp\", \n"
+"êúäćòî ïîđò ć ìćæäó 1 è 65535."
-#: ../../standalone/draksplash:1
+#: ../../any.pm:1
#, c-format
-msgid "Browse"
-msgstr "Ïđćăëćä"
+msgid "Shell"
+msgstr "Űćë"
-#: ../../standalone/draksplash:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Theme name"
-msgstr "Èìć íà òćìà"
+msgid "PCI"
+msgstr "PCI"
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "final resolution"
-msgstr "Đàçäćëèòćëíà ńïîńîáíîńò"
+#: ../../lang.pm:1
+#, c-format
+msgid "Sao Tome and Principe"
+msgstr "Ńàî Òîìć è Ïđèíńèïè"
-#: ../../standalone/draksplash:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "first step creation"
-msgstr "ïúđâà ńòúïêà íà ńúçäàâàíć"
+msgid "Can't login using username %s (bad password?)"
+msgstr "Íć ìîăà äà âëÿçà êàòî èçïîëçâàì èìć %s (ăđćűíà ïàđîëà?)"
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
+msgid "Azerbaidjani (latin)"
+msgstr "Àçćđáàéäæàíńêà (ëàòèíèöà)"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
+msgid "Package not installed"
+msgstr "Ïàêćòà íć ć èíńòàëèđàí"
-#: ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "No TV Card detected!"
-msgstr ""
+msgid "Become a MandrakeExpert"
+msgstr "Ńòàíćòć MandrakeExpert"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr ""
+msgid "American Samoa"
+msgstr "Àìćđèêàíńêà Ńàìîà"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Have a nice day!"
-msgstr ""
+msgid "Protocol"
+msgstr "Ïđîòîêîë"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "XawTV isn't installed!"
-msgstr ""
+msgid "Copy fonts on your system"
+msgstr "Êîïèđà űđèôòîâć íà âàűàòà ńèńòćìà"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Ïîÿâè ńć ăđćűêà ïđè ńêàíèđàíć çà TV êàíàëè"
+msgid "Harddrake help"
+msgstr "Harddrake ïîìîù"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Scanning for TV channels"
-msgstr ""
+msgid "Bogomips"
+msgstr "Áîăîìèïń"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
+msgid "Mandrake Terminal Server Configuration"
+msgstr "Êîíôèăóđàöèÿ íà Òćđìèíàëćí Ńúđâúđ â Mandrake "
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Area:"
+msgid ""
+"\n"
+" DrakBackup Report Details\n"
+"\n"
+"\n"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "TV norm:"
+msgid "Restore all backups"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
+msgid "if set to yes, check open ports."
+msgstr "àêî ć çàäàäćíî äà, ïđîâćđÿâà îòâîđćíèòć ïîđòîâć"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Australian Optus cable TV"
+msgid "This may take a moment to erase the media."
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Newzealand"
+msgid "You can't select/unselect this package"
+msgstr "Íć ìîæćòć äà îòáćëćæćòć/äćîòáćëćæćòć òîçè ïàêćò"
+
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
+#, c-format
+msgid "Warning"
+msgstr "Ïđćäóïđćæäćíèć"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"- Other Files:\n"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "France [SECAM]"
-msgstr "Ôđàíöèÿ [SECAM]"
+msgid "Remote host name"
+msgstr "Èìć íà îòäàëćśćí őîńò"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "East Europe"
-msgstr "Èçòîśíà Ćâđîïà"
+msgid "deactivate now"
+msgstr "äćàêòèâèđàé ńćăà"
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "West Europe"
-msgstr "Çàïàäíà Ćâđîïà"
+msgid "access to X programs"
+msgstr "äîńòúï äî X ïđîăđàìè"
-#: ../../standalone/drakxtv:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "China (broadcast)"
-msgstr ""
+msgid "Computing the size of the Windows partition"
+msgstr "Èçśèńëÿâà ńâîáîäíîòî ìÿńòî íà Windows äÿë"
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#: ../../standalone/drakxtv:1
#, c-format
-msgid "Japan (cable)"
-msgstr ""
+msgid "Italy"
+msgstr "Èòàëèÿ"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Japan (broadcast)"
-msgstr ""
+msgid "Name of printer"
+msgstr "Èìć íà ïđèíòćđ"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Canada (cable)"
-msgstr "Êàíàäà (êàáćë)"
+msgid "disable"
+msgstr "èçêëțśè"
-#: ../../standalone/drakxtv:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "USA (cable-hrc)"
-msgstr ""
+msgid "error unmounting %s: %s"
+msgstr "ăđćűêà ïđè äćìîíòèđàíć íà %s: %s"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "USA (cable)"
-msgstr ""
+msgid "Do it!"
+msgstr "Íàïđàâè ăî!"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "USA (broadcast)"
-msgstr ""
+msgid "Cayman Islands"
+msgstr "Êàéìàíîâè Îńòđîâè"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"XawTV isn't installed!\n"
-"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgid "%s not responding"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "primary"
-msgstr "ïúđâè"
+msgid "Select model manually"
+msgstr "Èçáîđ íà ìîäćë đúśíî"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "secondary"
-msgstr "âòîđè"
+msgid "Format"
+msgstr "Ôîđìàòèđàé"
-#: ../../standalone/harddrake2:1
+#: ../../network/adsl.pm:1
#, c-format
msgid ""
-"Click on a device in the left tree in order to display its information here."
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
msgstr ""
+"Íàé-śćńòèÿ íàśèí çà ńâúđçâàíć śđćç ADSL ć PPPOE.\n"
+"Íÿêîè âđúçêè èçïîëçâàò PPTP, à maëêî èçïîëçâàò DHCP.\n"
+"Àêî íć çíàćòć, èçáćđćòć 'èçïîëçâàé PPPOE'."
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Unknown"
-msgstr "Íćèçâćńòćí ìîäćë"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Various"
+msgstr "Đàçëèśíè"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "unknown"
-msgstr "Íćèçâćńòćí ìîäćë"
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Zip"
+msgstr "Zip óńòđîéńòâî"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Running \"%s\" ..."
-msgstr "Èçïúëíÿâà \"%s\" ..."
+msgid ""
+"\n"
+"\n"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Run config tool"
-msgstr "Èçïúëíÿâà èíńòđóìćíò çà êîíôèăóđèđàíć"
+msgid ""
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
+msgstr ""
+"\n"
+"Îòáćëćæćòć ïđèíòćđèòć, êîèòî èńêàòć äà ïđćőâúđëèòć è öúêíćòć\n"
+"\"Ïđćőâúđëè\"."
-#: ../../standalone/harddrake2:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Configure module"
-msgstr "Íàńòđîéêà íà ìîäóë"
+msgid "PDQ"
+msgstr "PDQ"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Information"
-msgstr "Èíôîđìàöèÿ"
+msgid "Albanian"
+msgstr "Àëáàíńêà"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Detected hardware"
-msgstr "Îòêđèò őàđäóćđ"
+msgid "Lithuania"
+msgstr "Ëèòâà"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "Harddrake2 version "
-msgstr "Harddrake2 âćđńèÿ "
+msgid "Compact"
+msgstr "Êîìïàêòćí"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detection in progress"
-msgstr "Îòêđèâàíć â ïđîăđćń"
+msgid "Detected model: %s %s"
+msgstr "Îòêđèò ìîäćë: %s %s"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Author:"
-msgstr "Àâòîđ:"
+msgid "MandrakeSoft has selected the best software for you"
+msgstr ""
#: ../../standalone/harddrake2:1
-#, c-format
+#, fuzzy, c-format
msgid ""
"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
msgstr ""
"Òîâà ć HardDrake, őàđäóćđćí êîíôèăóđàöèîíćí èíńòđóìćíò íà Mandrake.\n"
"Âćđńèÿ:"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "About Harddrake"
-msgstr "Îòíîńíî Harddrake"
+msgid "Local files"
+msgstr "Ëîêàëíè ôàéëîâć"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "/_About..."
-msgstr "/_Îòíîńíî..."
+msgid "maybe"
+msgstr "ńòàâà"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "/_Report Bug"
-msgstr "/_Èíôîđìèđàé çà áúă"
+msgid "Panama"
+msgstr "Ïàíàìà"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Select a device !"
-msgstr "Èçáćđćòć óńòđîéńòâî !"
+msgid "Monitor"
+msgstr "Ìîíèòîđ"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Description of the fields:\n"
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
"\n"
-msgstr ""
-"Îïèńàíèć íà ïîëćòàòà:\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Harddrake help"
-msgstr "Harddrake ïîìîù"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "/_Fields description"
-msgstr "/_Ïîëćòà îïèńàíèć"
-
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "/_Help"
-msgstr "/_Ïîìîù"
+msgid "65 thousand colors (16 bits)"
+msgstr "65 őèëÿäè öâÿòà (16 áèòà)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/_Quit"
-msgstr "/_Èçëèçà"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "/Àâòîìàòèśíî îòêđèâà _jazz óńòđîéńòâà"
+msgid "Size: %d KB\n"
+msgstr "Ăîëćìèíà: %d KB\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "/Autodetect _modems"
-msgstr "/Àâòîìàòèśíî îòêđèâà _ìîäćìè"
+msgid "Remove fonts on your system"
+msgstr "Èçòđèâà űđèôòîâć îò âàűàòà ńèńòćìà"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "/Autodetect _printers"
-msgstr "/Àâòîìàòèśíî îòêđèâà _ïđèíòćđè"
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
+msgstr ""
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "/_Options"
-msgstr "/_Îïöèè"
+msgid "Graphical interface at startup"
+msgstr "X ïđè ńòàđòèđàíć íà ńèńòćìàòà"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "the vendor name of the processor"
-msgstr "èìćòî íà ïđîèçâîäèòćëÿ íà ïđîöćńîđà"
+msgid "Please enter the directory to save:"
+msgstr "Ìîëÿ, âúâćäćòć äèđćêòîđèÿòà çà çàïàçâàíć:"
#: ../../standalone/harddrake2:1
#, c-format
-msgid "the vendor name of the device"
-msgstr "èìćòî íà ïđîèçâîäèòćëÿ íà óńòđîéńòâîòî"
+msgid "format of floppies supported by the drive"
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../raid.pm:1
#, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "Ìîëÿ, èçáćđćòć òèïà íà űèíàòà êúì êîÿòî ć ńâúđçàíà ìèűêàòà âè."
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "Íÿìà äîńòàòúśíî äÿëîâć çà RAID íèâî %d\n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
msgstr ""
+"Ńëćäíèòć ïđèíòćđè ńà íàńòđîćíè. Öúêíćòć íà ćäèí îò òÿő, çà äà ăî đćäàêòèđàòć "
+"èëè çà äà ïîëóśèòć èíôîđìàöèÿ çà íćăî."
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Model stepping"
-msgstr "Ôîđìàòèđàíć"
-
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "the number of the processor"
-msgstr "íîìćđúò íà ïđîöćńîđà"
+msgid "Connected"
+msgstr "Ńâúđçàí"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Processor ID"
-msgstr "Ïđîöćńîđ ID"
+msgid "USB printer \\#%s"
+msgstr "USB ïđèíòćđ \\#%s"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "network printer port"
-msgstr "ïîđò íà ìđćæîâ ïđèíòćđ "
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "the name of the CPU"
-msgstr "èìćòî íà ïđîèçâîäèòćëÿ íà óńòđîéńòâîòî"
+msgid "Macedonian"
+msgstr "Ìàêćäîíńêà"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Name"
-msgstr "Èìć"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "the number of buttons the mouse has"
-msgstr "íîìćđúò íà ïđîöćńîđà"
+msgid "Bridges and system controllers"
+msgstr "Áđèäæîâć è ńèńòćìíè êîíòđîëćđè"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Number of buttons"
-msgstr "Áđîé áóòîíè"
+msgid "/File/_Save"
+msgstr "/Ôàéë/_Çàïèń"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Official vendor name of the cpu"
-msgstr ""
+msgid "Mali"
+msgstr "Ìàëè"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Model name"
-msgstr "Èìć íà ìîäćë"
+#: ../../install_steps_gtk.pm:1
+#, fuzzy, c-format
+msgid "No details"
+msgstr "Ïîäđîáíîńòè"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
-msgstr "Ăćíćđàöèÿ íà cpu (íàïđ: 8 çà PentiumIII, ...)"
+msgid "very nice"
+msgstr "ìíîăî äîáúđ"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Model"
-msgstr "Ìîäćë"
+msgid "Preview"
+msgstr "Ïđćăëćä"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "hard disk model"
-msgstr "ìîäćë íà òâúđä äèńê"
+msgid "Remote Control"
+msgstr "Îòäàëćśćí êîíòđîë"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "class of hardware device"
-msgstr "êëàń őàđäóćđíî óńòđîéńòâî"
+msgid "Please select media for backup..."
+msgstr "Ìîëÿ, èçáćđćòć íîńèòćë çà âúçńòàíîâÿâàíć..."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Media class"
-msgstr "Êëàń íîńèòćë"
+msgid "XFree86 server: %s\n"
+msgstr "XFree86 ńúđâúđ: %s\n"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Sub generation of the cpu"
-msgstr ""
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Allow Thin Clients"
+msgstr "DHCP êëèćíò"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Level"
-msgstr "Íèâî"
+msgid "Georgian (\"Russian\" layout)"
+msgstr "Ăđóçèíńêà (\"Đóńêà\" íàđćäáà)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Format of floppies supported by the drive"
-msgstr ""
+msgid "/_Options"
+msgstr "/_Îïöèè"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Floppy format"
-msgstr "Ôîđìàòèđà ôëîïè"
+msgid "Your printer model"
+msgstr "Âàűèÿò ìîäćë ïđèíòćđ"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
msgstr ""
+"\n"
+"\n"
+"(ÏĐĆÄÓÏĐĆÆÄĆÍÈĆ! Âèć èçïîëçâàòć XFS çà âàűàòà êîđćíîâà ôàéëîâà ńèńòćìà,\n"
+"ńúçäàâàíćòî íà bootdisk âúđőó 1.44 Ìá ôëîïè íÿìà äà ć óńïćűíî,\n"
+"ïîíćæć XFS ńć íóæäàć îò ìíîăî ïîâćść ìÿńòî)."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Halt bug"
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "F00f bug"
-msgstr ""
+#: ../../share/advertising/04-configuration.pl:1
+#, fuzzy, c-format
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "Êîíôèăóđàöèÿ íà Òćđìèíàëćí Ńúđâúđ â Mandrake "
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
+msgid "Save"
+msgstr "Çàïàçâà"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr ""
+msgid "The %s is unsupported"
+msgstr "%s íć ńć ïîäúđæà"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr ""
+msgid "Load the drivers for your usb devices."
+msgstr "Çàđćæäàíć äđàéâćđè çà âàűèòć USB óńòđîéńòâà."
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Is FPU present"
-msgstr ""
+msgid "Disk"
+msgstr "Äèńê"
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
-msgstr ""
+msgid "Enter a printer device URI"
+msgstr "Âúâćäćòć URI íà ïćśàòàùî óńòđîéńòâî"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Fdiv bug"
+msgid ""
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr "Ôëàăîâć íà CPU ńúîáùćíè îò ÿäđîòî"
-
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Flags"
-msgstr "Ôëàăîâć"
+msgid "Israel"
+msgstr "Èçđàćë"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr ""
+msgid "French Guiana"
+msgstr "Ôđćíńêà Ăâèàíà"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Module"
-msgstr "Ìîäóë"
+msgid "default:LTR"
+msgstr "default:LTR"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr "íîâî äèíàìèśíî óńòđîéńòâî ăćíćđèđàíî îò ÿäđîòî devfs"
+msgid "add a rule"
+msgstr "äîáàâÿ ïđàâèëî"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New devfs device"
-msgstr "Íîâî devfs óńòđîéńòâî"
+msgid "A command line must be entered!"
+msgstr "Òđÿáâà äà áúäć âúâćäćí êîìàíäćí đćä!"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "old static device name used in dev package"
-msgstr ""
+msgid "Select user manually"
+msgstr "Èçáèđà ïîòđćáèòćëè đúśíî"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Old device file"
-msgstr "Ńòàđ ôàéë íà óńòđîńòâî"
+msgid "Transfer printer configuration"
+msgstr "Ïđćíîń íà íàńòđîéêà íà ïđèíòćđ"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This field describes the device"
-msgstr "Òîâà ïîëć îïèńâà óńòđîéńòâîòî"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "Èńêàòćëè äà đàçđćűèòć ïćśàò çà ïđèíòćđèòć ńïîìćíàòè ăîđć?\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
-msgstr "Śćńòîòà íà ïđîöćńîđà â Mhz"
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
+msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Frequency (MHz)"
-msgstr "Śćńòîđòà (MHz)"
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "%s (Port %s)"
+msgstr "Ïîđò"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use network connection to backup"
+msgstr "Ëîű backup-ôàéë"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Cpuid level"
-msgstr "Íèâî íà ńèăóđíîńò"
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
+"Ńćăà ć ìîìćíòúò äà îïđćäćëèòć êîè ïđîăđàìè èńêàòć äà áúäàò èíńòàëèđàíè íà\n"
+"ńèńòćìàòà âè. Â Mandrake Linux äèńòđèáóöèÿòà èìà őèëÿäè ïàêćòè, íî íć ć\n"
+"çàäúëæèòćëíî äà ăè çíàćòć íàèçóńò.\n"
+"\n"
+"Àêî èçâúđűâàòć ńòàíäàđòíà èíńòëàöèÿ îò CDROM, ïúđâî ùć áúäćòć ïîïèòàíè êîè\n"
+"CD-òà èìàòć (â Ćêńïćđòćí đćæèì). Ïđîâćđćòć çàăëàâèÿòà íà CD-òàòà è ïîńîśćòć\n"
+"êóòèéêèòć ńúîòâćòńòâàùè íà CD-òàòà, ń êîèòî đàçïîëàăàòć. Öúêíćòć \"OK\",\n"
+"êîăàòî ńòć ăîòîâè äà ïđîäúëæèòć.\n"
+"\n"
+"Ïàêćòèòć ńà ïîäđćäćíè â ăđóïè ńúîòâćòńòâàùè íà ïđàêòèśćńêàòà óïîòđćáà íà\n"
+"ìàűèíàòà âè. Ăđóïèòć, ńàìè ïî ńćáć ńè, ńà ïîäđćäćíè â śćòèđè ńćêöèè:\n"
+"\n"
+" * \"Đàáîòíà ńòàíöèÿ\": àêî ńìÿòàòć äà èçïîëçâàòć ìàűèíàòà ńè êàòî đàáîòíà "
+"ńòàíöèÿ,\n"
+"èçáćđćòć ćäíà èëè ïîâćść ńúîòâćòíèòć ăđóïè.\n"
+"\n"
+" * \"Đàçđàáîòêà\": àêî ìàűèíàòà âè ùć áúäć èçïîëçâàíć çà ïđîăđàìèđàíć, "
+"èçáćđćòć\n"
+"æćëàíàòà(èòć) ăđóïà(è).\n"
+"\n"
+" * \"Ńúđâúđ\": íàêđàÿ, àêî ìàűèíàòà âè ùć áúäć èçïîëçâàíà çà ńúđâúđ, ùć\n"
+"ìîæćòć äà èçáćđćòć êîè îò íàé-śćńòî èçïîëçâàíèòć óńëóăè èńêàòć äà èìàòć\n"
+"èíńòàëèđàíè íà ìàűèíàòà.\n"
+"\n"
+" * \"Ăđàôèśíà ńđćäà\": òóê ìîæćòć äà èçáćđćòć ïđćäïîśèòàíàòà ăđàôèśíà "
+"ńđćäà.\n"
+"Ïîíć ćäíà òđÿáâà äà áúäć èçáđàíà, àêî èńêàòć äà èìàòć ăđàôèśíà ńđćäà !\n"
+"\n"
+"Ïđćìćńòâàéêè êóđńîđà íà ìèűíàòà íàä èìćòî íà ăđóïàòà, ùć âèäèòć êđàòúê\n"
+"îáÿńíćíèòćëćí òćêńò çà íćÿ.\n"
+"\n"
+"Ìîæćòć äà öúêíćòć êóòèéêàòà \"Èíäèâèäóàëćí èçáîđ íà ïàêćòè\", êîÿòî ć "
+"ïîëćçíà,\n"
+"àêî ńòć çàïîçíàòè ń ïàêćòèòć, êîèòî ùć âè áúäàò ïđćäëîæćíè èëè àêî èńêàòć "
+"äà\n"
+"èìàòć ïúëćí êîíòđîë íàä òîâà, êîćòî äà áúäć èíńòàëèđàíî.\n"
+"\n"
+"Àêî ńòć çàïîśíàëè èíńòàëàöèÿòà â đćæèì íà \"Îáíîâÿâàíć\", ìîæćòć äà "
+"èçêëțśèòć\n"
+"âńèśêè ăđóïè, çà äà èçáćăíćòć èíńòàëèđàíćòî íà íîâè ïàêćòè. Òîâà ć ïîëćçíî\n"
+"ïđè ïîïđàâêà èëè îáíîâÿâàíć íà ńúùćńòâóâàùàòà ńèńòćìà."
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
-msgstr "ôàìèëèÿ cpu (íàïđ: 6 çà i686 êëàń)"
+msgid "Accept user"
+msgstr "Ïđèćìè ïîòđćáèòćë"
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, c-format
-msgid "Cpuid family"
-msgstr ""
+msgid "Server"
+msgstr "Ńúđâúđ"
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr ""
+msgid "Bad choice, try again\n"
+msgstr "Ëîű èçáîđ, îïèòàéòć îòíîâî\n"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Coma bug"
-msgstr ""
+msgid "Heard and McDonald Islands"
+msgstr "Őúđä è ÌàêÄîíàëä Îńòđîâè"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
+msgid "No alternative driver"
+msgstr "Íÿìà àëòćđíàòèâćí äđàéâćđ"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Drive capacity"
-msgstr ""
+msgid "Toggle to expert mode"
+msgstr "Ïđćìèíè â Ćêńïćđòćí đćæèì"
-#: ../../standalone/harddrake2:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Size of the (second level) cpu cache"
-msgstr "Đàçìćđ íà âòîđèśćí êćű íà cpu"
+msgid "(on this machine)"
+msgstr "(íà òàçè ìàűèíà)"
-#: ../../standalone/harddrake2:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Cache size"
-msgstr "Đàçìćđ íà êćű"
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "Gateway àäđćńà òđÿáâà äà áúäć âúâ ôîđìàò 1.2.3.4"
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
#, c-format
msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+"\"%s\" based winmodem detected, do you want to install needed software ?"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Location on the bus"
-msgstr ""
+msgid "Looking at packages already installed..."
+msgstr "Òúđńè âúâ âćść èíńòàëèđàíèòć ïàêćòè..."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+msgid "Use Differential Backups"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Bus identification"
-msgstr "Èäćíòèôèêàöèÿ íà űèíà"
+msgid "Driver"
+msgstr "Äđàéâćđ"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
msgstr ""
+"Linuxconf ïîíÿêîăà óđćæäà èçâúđűâàíćòî íà đàçëèśíè çàäàśè\n"
+"ïđè ńòàđòèđàíć çà ïîääđúæêà íà ńèńòćìíàòà íàńòđîéêà."
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Bogomips"
-msgstr "Áîăîìèïń"
-
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "EIDE/SCSI êàíàë"
+msgid "Printer on remote lpd server"
+msgstr "Ïđèíòćđ íà îòäàëćśćí LPD ńúđâúđ"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Channel"
-msgstr "Êàíàë"
+msgid ""
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
msgstr ""
-"òîâà ć ôèçèśćńêàòà űèíà íà êîéòî ć çàêàśćíî óńòđîńòâîòî (íàïđ: PCI, USB, ...)"
-#: ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Bus"
-msgstr "Űèíà"
+msgid "No mouse"
+msgstr "Áćç ìèűêà"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "ńïèńúê íà àëòćđíàòèâíè äđàéâćđè çà òàçè êàđòà"
+msgid "Germany"
+msgstr "Ăćđìàíèÿ"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Alternative drivers"
-msgstr "Àëòćđíàòèâíè äđàéâćđè"
+msgid "Austria"
+msgstr "Àâńòđèÿ"
-#: ../../standalone/keyboarddrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Èńêàòć ëè BackSpace äà ïîäàâà Delete íà êîíçîëàòà ?"
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr ""
+"Èçïúëíćòć \"sndconfig\" ńëćä èíńòàëàöèÿ çà äà êîíôèăóđèđàòć âàűàòà çâóêîâà "
+"êàđòà"
-#: ../../standalone/keyboarddrake:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Ìîëÿ, èçáćđćòć ïîäđćæäàíć íà êëàâèàòóđàòà."
+msgid "Collapse Tree"
+msgstr "Èçśèńòè äúđâîòî"
-#: ../../standalone/livedrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Íć ìîăà äà ïóńíà îáíîâÿâàíćòî !!!\n"
+msgid "Auto Install Configurator"
+msgstr "Íàńòđîéśèê íà àâòîìàòèśíà èńíòàëàöèÿ"
-#: ../../standalone/livedrake:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Ìîëÿ, ńëîæćòć Èíńòàëàöèîííèÿ CD-ROM â óńòđîéńòâîòî è íàòèńíćòć Ok, êîăàòî "
-"ńòć ăîòîâè.\n"
-"Àêî ăî íÿìàòć, íàòèńíćòć Îòìÿíà, çà äà èçáćăíćòć èíńòàëèđàíćòî îò òîçè CD-"
-"ROM."
+msgid "Configure networking"
+msgstr "Íàńòîéêà íà ìđćæàòà"
-#: ../../standalone/livedrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Change Cd-Rom"
-msgstr "Ńìÿíà íà CD-ROM"
+msgid "Where do you want to install the bootloader?"
+msgstr "Êúäć èńêàòć äà èíńòàëèđàòć bootloader-à?"
-#: ../../standalone/localedrake:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
+msgstr ""
+"Ìîëÿ, öúêíćòć íà ïđćäïîśèòàíèÿ ćçèê íà èíńòàëàöèÿ è ńèńòćìíà óïîòđćáà.\n"
+"\n"
+"Öúêàíćòî íà áóòîíà \"Íàïđćäíèśàâ\" ùć âè ïîçâîëè äà èçáćđćòć äđóăè ćçèöè\n"
+"äà áúäàò èíńòàëèđàíè íà đàáîòíàòà âè ńòàíöèÿ. Èçáèđàíćòî íà äđóăè ćçèöè\n"
+"ùć èíńòàëèđà ôàéëîâć ńïćöèâèśíè çà ćçèöèòć çà ńèńòćìíà äîêóìćíòàöèÿ è\n"
+"ïđèëîæćíèÿ. Íàïđèìćđ, àêî èìàòć ïîòđćáèòćëè îò Èçïàíèÿ íà ìàűèíàòà ńè,\n"
+"èçáćđćòć àíăëèéńêè êàòî ăëàâćí ćçèê â äúđâîâèäíàòà ôîđìà è â ńćêöèÿ\n"
+"\"Íàïđćäíèśàâ\" öúêíćòć íà ńèâàòà çâćçäà ńúîòâćòńòâàùà íà\n"
+"\"Èńïàíńêè|Èńïàíèÿ\".\n"
+"Îòáćëćæćòć, ść ìîăàò äà áúäàò èíńòàëèđàíè íÿêîëêî ćçèêà. Âćäíúæ èçáđàí\n"
+"íÿêàêúâ ëîêàë, öúêíćòć áóòîíà \"OK\", çà äà ïđîäúëæèòć."
+
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr "Ïđîìćíèòć ńà çàïàçćíè, íî çà äà áúäàò ćôćêòèâíè òđÿáâà äà èçëćçćòć"
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr "%s íć ńć ïîäúđæà îò òàçè âćđńèÿ íà Mandrake Linux."
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Save as.."
-msgstr "Çàïàçè êàòî..."
+msgid "DHCP client"
+msgstr "DHCP êëèćíò"
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Please enter your email address below "
-msgstr "Ìîëÿ, âúâćäćòć äîëó âàűèÿò àäđćń íà Ćë. ïîùà"
+msgid "Restoring from file %s failed: %s"
+msgstr "Âúçńòàíîâÿâàíćòî îò ôàéëà %s íć óńïÿ: %s"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "alert configuration"
-msgstr "êîíôèăóđàöèÿ íà òđćâîăà"
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech Mouse (ńćđèéíà, îò ńòàđèÿ òèï C7)"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Âèć ùć ïîëóśèòć òđćâîăà àêî íàòîâàđâàíćòî ć ïî-âèńîêî îò òàçè ńòîéíîńò"
+msgid "Are you sure that you want to set up printing on this machine?\n"
+msgstr "Ńèăóđíè ëè ńòć, ść èńêòć äà íàńòđîèòć ïćśàò çà òàçè ìàűèíà?\n"
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "load setting"
-msgstr "óńòàíîâÿâàíć íà íàòîâàđâàíć"
+msgid "New devfs device"
+msgstr "Íîâî devfs óńòđîéńòâî"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
+msgid "ERROR: Cannot spawn %s."
msgstr ""
-"Âèć ùć ïîëóśèòć òđćâîăà àêî ćäíî îò èçáđîćíèòć îáńëóæâàíèÿ íć ńć èçïúëíÿâà "
-"ïîâćść"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "service setting"
-msgstr "óńòàíîâÿâàíć íà îáńëóæâàíèÿ"
+msgid "Boot Style Configuration"
+msgstr "Íàńòđîéêà íà íàśèíà íà ńòàđòèđàíć"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Automatic time synchronization"
+msgstr "Àâòîìàòèśíà ńèíőđîíèçàöèÿ íà âđćìćòî (èçïîëçâà NTP)"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Xinetd Service"
-msgstr "Xinetd îáńëóæâàíć"
+msgid "Backup files not found at %s."
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Webmin Service"
-msgstr "Webmin Îáńëóæâàíć"
+msgid "Thank you for choosing Mandrake Linux 9.1"
+msgstr "Áëàăîäàđèì âè, ść èçáđàőòć Mandrake Linux 9.1"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "SSH Server"
-msgstr "SSH Ńúđâúđ"
+msgid "Armenian (phonetic)"
+msgstr "Àđìćíńêà (ôîíćòèśćí)"
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Samba Server"
-msgstr "Samba Ńúđâúđ"
+msgid "Card model:"
+msgstr "Ìîäćë íà êàđòà:"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Thin Client"
+msgstr "DHCP êëèćíò"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Postfix Mail Server"
-msgstr "Postfix Ïîùćíńêè ńúđâúđ"
+msgid "Start Server"
+msgstr "Ńòàđòèđà ńúđâúđ"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ftp Server"
-msgstr "Ftp Ńúđâúđ"
+msgid "Turkmenistan"
+msgstr "Òóđêìćíèńòàí"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Domain Name Resolver"
-msgstr "Èìć íà äîìćéíà"
+msgid "All remote machines"
+msgstr "(íà òàçè ìàűèíà)"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "Apache World Wide Web Ńúđâúđ"
+msgid "Install themes"
+msgstr "Èíńòàëèđàíć íà òćìè"
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
+#: ../../standalone/drakbackup:1
+#, c-format
msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
msgstr ""
-"Äîáđć äîűëè â íàńòđîéêàòà íà Proxy.\n"
-"\n"
-"Òóê ùć ìîæćòć äà óńòàíîâèòć âàűèòć HTTP è FTP proxy\n"
-"ńúń èëè áćç ïîòđćáèòćëńêî èìć è ïàđîëà\n"
+" îáíîâÿâàíèÿ 2002 MandrakeSoft îò Stew Benedict <sbenedict\\@mandrakesoft."
+"com>"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "Mail alert configuration"
-msgstr "Êîíôèăóđàöèÿ çà ïîäđćäáà íà ïîùà"
+msgid "Espanol"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mail alert"
-msgstr "Ïîäđćäáà íà ïîùà"
+msgid "Preparing installation"
+msgstr "Ïîäăîòâÿì èíńòàëàöèÿòà"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "ìîëÿ èçśàêàéòć, ïđàâÿ đàçáîđ íà ôàéë: %s"
+msgid "Edit selected host/network"
+msgstr "Đćäàêòèđàíć íà èçáđàí őîńò/ìđćæà"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Content of the file"
-msgstr "Ńúäúđæàíèć íà ôàéëà"
+msgid "Add User -->"
+msgstr "Äîáàâÿ ïîòđćáèòćë -->"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Calendar"
-msgstr "Êàëćíäàđ"
+msgid "Nauru"
+msgstr "Íàóđó"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Choose file"
-msgstr "Èçáćđćòć ôàéë"
+msgid "True Type fonts installation"
+msgstr "Èíńòàëèđàíć íà True Type űđèôòîâć"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "but not matching"
-msgstr "íî íć ńúâïàäà"
+msgid "Auto-detect printers connected directly to the local network"
+msgstr "Àâòîìàòèśíî îòêđèâà ïđèíòćđè ńâúđçàíè äèđćêòíî êúì ëîêàëíàòà ìđćæà"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "matching"
-msgstr "ńúâïàäćíèć"
+msgid "LAN configuration"
+msgstr "Íàńòđîéêà íà LAN"
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Settings"
-msgstr "Íàńòđîéêè"
+msgid "hard disk model"
+msgstr "ìîäćë íà òâúđä äèńê"
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "A tool to monitor your logs"
-msgstr "Èíńòđóìćíò çà ïđćăëćæäàíć íà âàűèòć ëîă ôàéëîâć"
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "Íć ìîæćòć äà èçïîëçâàòć LVM òèï çà ìÿńòî íà ìîíòèđàíć %s"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "search"
-msgstr "òúđńè"
+msgid "Get Windows Fonts"
+msgstr "Âçèìà űđèôòîâć íà Windows"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Mandrake Tools Explanation"
-msgstr ""
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Syslog"
-msgstr "Ńèńòćìćí æóđíàë"
+msgid "Iranian"
+msgstr "Èđàíńêà"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Messages"
-msgstr "Ńúîáùćíèÿ"
+msgid "Croatia"
+msgstr "Őúđâàòèÿ"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "User"
-msgstr "Ïîòđćáèòćë"
+msgid "Gateway:"
+msgstr "Gateway:"
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "/Help/_About..."
-msgstr "/Ïîìîù/_Îòíîńíî..."
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Add server"
+msgstr "Äîáàâè ïîòđćáèòćë"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Options/Test"
-msgstr "/Îïöèè/Òćńò"
+msgid "Remote printer name"
+msgstr "Èìć íà îòäàëćśćí ïđèíòćđ"
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "/File/-"
-msgstr "/Ôàéë/-"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together in order to highly reduce hacking risks."
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "/File/Save _As"
-msgstr "/Ôàéë/Çàïèń _êàòî"
+msgid "Device: "
+msgstr "Óńòđîéńòâî: "
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, c-format
-msgid "<control>S"
-msgstr "<control>S"
+msgid "Printerdrake"
+msgstr "Printerdrake"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "/File/_Save"
-msgstr "/Ôàéë/_Çàïèń"
+msgid "License agreement"
+msgstr "Ëèöćíçèîíćí äîăîâîđ"
-#: ../../standalone/logdrake:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "<control>O"
-msgstr "<control>O"
+msgid "System Options"
+msgstr "Ńèńòćìíè îïöèè"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/File/_Open"
-msgstr "/Ôàéë/_Îòâîđè"
+msgid "Please enter the directory where backups are stored"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../security/level.pm:1
#, c-format
-msgid "<control>N"
-msgstr "<control>N"
+msgid "Please choose the desired security level"
+msgstr "Ìîëÿ, èçáćđćòć íèâî íà ńèăóđíîńò"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "/File/_New"
-msgstr "/Ôàéë/_Íîâ"
+msgid "This host is already in the list, it cannot be added again.\n"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Show only for the selected day"
-msgstr "Ïîêàçâà ńàìî çà èçáđàíèÿò äćí"
+msgid ", USB printer"
+msgstr ", USB ïđèíòćđ"
-#: ../../standalone/mousedrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Emulate third button?"
-msgstr "Äà ńèìóëèđàì ëè òđćòè áóòîí ?"
+msgid "Choose the applications that will support the fonts:"
+msgstr "Èçáćđćòć ïđèëîæćíèÿòà êîèòî ùć ïîääúđæàò űđèôòîâćòć:"
-#: ../../standalone/mousedrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please choose your mouse type."
-msgstr "Ìîëÿ, èçáćđćòć òèï íà ìèűêàòà."
+msgid "Configure X"
+msgstr "Íàńòđîéêà íà Ő"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Connect %s"
-msgstr "Ńâúđçâà %s"
+msgid "Turkish (traditional \"F\" model)"
+msgstr "Òóđńêà (òđàäèöèîíćí \"F\" ìîäćë)"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Disconnect %s"
-msgstr "Đàçêàśâà %s"
+msgid "Congratulations!"
+msgstr "Ïîçäđàâëćíèÿ !"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
+msgid "Use owner id for execution"
+msgstr "Èçïîëçâà id íà ńîáńòâćíèê ïđè èçïúëíćíèć"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "received"
-msgstr "ïîëóśćíè"
+msgid "Down"
+msgstr "Äîëó"
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "transmitted"
-msgstr "ïđćőâúđëćíè"
+msgid "Raw printer (No driver)"
+msgstr "'Raw' ïđèíòćđ (Áćç äđàéâćđ)"
-#: ../../standalone/net_monitor:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "received: "
-msgstr "ïîëóśćíî: "
+msgid "Install rpm"
+msgstr "Èíńòàëèđà rpm"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "sent: "
-msgstr "èçïđàùà: "
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
+msgstr ""
+"Çà äà èçïćśàòàòć ôàéë îò êîìàíäíèÿ đćä (òćđìèíàëćí ïđîçîđćö), ìîæćòć èëè äà "
+"èçïîëçâàòć êîìàíäàòà \"%s <file>\" èëè ăđàôèśíèÿ ïćśàòàù èíńòđóìćíò: \"xpp "
+"<file>\" èëè \"kprinter <file>\". Ăđàôèśíèòć èíńòđóìćíòè âè ïîçâîëÿâàò äà "
+"èçáèđàòć ïđèíòćđà è äà ïîïđàâÿòć ëćńíî íàńòđîéêèòć íà îïöèèòć.\n"
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Local measure"
-msgstr "Ëîêàëíî èçìćđâàíć"
+msgid "Time remaining "
+msgstr "Îńòàâàùî âđćìć "
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "average"
-msgstr "ńđćäíî"
+msgid "UK keyboard"
+msgstr "UÊ êëàâèàòóđà"
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Color configuration"
-msgstr "Êîíôèăóđàöèÿ íà öâÿò"
+msgid "Unmount"
+msgstr "Äćìîíòèđàé"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
-"Âđúçêàòà ïđîïàäíà.\n"
-"Ïđîâćđćòć ńè êîíôèăóđàöèÿòà â Êîíòđîëćí öćíòúđ íà Mandrake."
+msgid "Uninstall Fonts"
+msgstr "Èíńòàëèđà űđèôòîâć"
-#: ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Connection complete."
-msgstr "Âđúçêàòà ć óńòàíîâćíà."
+msgid "Microsoft Explorer"
+msgstr "Microsoft Explorer"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Disconnection from the Internet complete."
-msgstr "Đàçêàśâàíćòî îò Èíòćđíćò ć çàâúđűèëî"
+msgid "German (no dead keys)"
+msgstr "Íćìńêà (áćç íćđàáîòćùè êëàâèűè)"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disconnection from the Internet failed."
-msgstr "Đàçêàśâàíćòî îò Èíòćđíćò ć íćóńïćűíî"
+msgid "Transferring %s..."
+msgstr "Ïđćőâúđëÿíć íà %s ..."
-#: ../../standalone/net_monitor:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Connecting to the Internet "
-msgstr "Ńâúđçâàì ńć êúì Èíòćđíćò"
+msgid "32 thousand colors (15 bits)"
+msgstr "32 őèëÿäè öâÿòà (15 áèòà)"
-#: ../../standalone/net_monitor:1
+#: ../../any.pm:1
#, c-format
-msgid "Disconnecting from the Internet "
-msgstr "Đàçêàśâàì îò Èíòćđíćò "
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
+msgstr ""
+"Âèć ìîæć äà ćêńïîđòèđàòć êàòî èçïîëçâàòć NFS èëè Samba. Ìîëÿ, èçáćđćòć êàêâî "
+"èńêàòć äà èçïîëçâàòć."
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Ïîśàêàéòć, ïđîáâàì âàűàòà âđúçêà..."
+msgid "Reboot"
+msgstr "Ïđćńòàđòèđà"
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logs"
-msgstr ""
+msgid "Gambia"
+msgstr "Ăàìáèÿ"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Connection Time: "
-msgstr "Âđćìć íà âđúçêàòà: "
+msgid "Mandrake Control Center"
+msgstr "Êîíòđîëćí öćíòúđ íà Mandrake"
-#: ../../standalone/net_monitor:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Receiving Speed:"
-msgstr "Ńêîđîńò íà ïîëóśàâàíć:"
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
+msgstr ""
+"Âèć ìîæć äà âúâćäćòć äđóăè ïîđòîâć. \n"
+"Âàëèäíè ńà íàïđèìćđ: 139/tcp 139/udp.\n"
+"Ïîăëćäíćòć â /etc/services çà èíôîđìàöèÿ"
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1
#, c-format
-msgid "Sending Speed:"
-msgstr "Ńêîđîńò íà èçïđàùàíć:"
+msgid ""
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
+msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Statistics"
-msgstr "Ńòàòèńòèêè"
+msgid "\t-Tape \n"
+msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakhelp:1
#, c-format
-msgid "Profile "
-msgstr "Ïđîôèë "
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
+msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Network Monitoring"
-msgstr "Ìîíèòîđèíă íà ìđćæàòà"
+msgid "Remember this password"
+msgstr "Çàïîìíÿ òàçè ïàđîëà"
-#: ../../standalone/printerdrake:1
-#, fuzzy, c-format
-msgid "Reading data of installed printers..."
-msgstr "Ëîêàëćí ïđèíòćđ"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Internet Connection Sharing is now enabled."
+msgstr "Ńïîäćëÿíćòî íà Èíòćđíćò â ìîìćíòà ć âêëțśćíî."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Name/IP address of host:"
+msgid "\t-Network by SSH.\n"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
msgstr ""
+" Àêî æćëàíèÿò ïđèíòćđ ć îòêđèò àâòîìàòèśíî, ïđîńòî èçáćđćòć ăî îò ńïèńúêà è "
+"òîăàâà äîáàâćòć èìć íà ïîòđćáèòćë, ïàđîëà, è/èëè đàáîòíà ăđóïà àêî ć "
+"íćîáőîäèìî."
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scannerdrake"
-msgstr "Èçáćđćòć ăđàôèśíà êàđòà"
+#: ../../help.pm:1 ../../install_interactive.pm:1
+#, c-format
+msgid "Use the free space on the Windows partition"
+msgstr "Èçïîëçâàé ńâîáîäíîòî ìÿńòî íà Windows äÿëà"
#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Ìîëÿ, ïđîáâàéòć ìèűêàòà ńè"
+#, c-format
+msgid "%s found on %s, configure it automatically?"
+msgstr "%s íàìćđćíî íà %s, äà êîíôèăóđèđàì àâòîìàòèśíî?"
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Sharing of local scanners"
-msgstr "Ëîêàëćí ïđèíòćđ"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "This machine"
-msgstr "(íà òàçè ìàűèíà)"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Remove selected host"
-msgstr "Èçòđèâàíć íà îïàűêàòà"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Edit selected host"
-msgstr "çàńćśćíà %s"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Add host"
-msgstr "Äîáàâè ïîòđćáèòćë"
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "XFree86 driver: %s\n"
+msgstr "XFree86 äđàéâćđ: %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "These are the machines from which the scanners should be used:"
+msgid "This host/network is already in the list, it cannot be added again.\n"
msgstr ""
+"Òîçè àäđćń/őîńò âćść ć â ńïèńúêà, òîé íć ìîæć äà áúäć äîáàâćí îòíîâî.\n"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Usage of remote scanners"
-msgstr "Èçïîëçâàé ńâîáîäíîòî ìÿńòî"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "All remote machines"
-msgstr "(íà òàçè ìàűèíà)"
-
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+"\n"
+" DrakBackup Report \n"
+"\n"
msgstr ""
+"\n"
+" DrakBackup Đàïîđò \n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use the scanners on hosts: "
-msgstr ""
+msgid "Choose the packages you want to install"
+msgstr "Èçáćđćòć ïàêćòèòć, êîèòî èńêàòć äà èíńòàëèđàòć"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use scanners on remote computers"
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Ïîäćëÿíć íà ôàéëîâć"
+msgid "Papua New Guinea"
+msgstr "Ïàïóà Íîâà Ăâèíćÿ"
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr ""
+msgid "Serbian (cyrillic)"
+msgstr "Ńđúáńêà (êèđèëèöà)"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
+msgid "Make kernel message quiet by default"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
msgstr ""
+"Èńêàòć ëè äà íàńòđîèòć òîçè ïđèíòćđ (\"%s\")\n"
+"êàòî ïđèíòćđ ïî ïîäđàçáèđàíć ?"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Re-generating list of configured scanners ..."
+msgid "The DHCP end range"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for new scanners ..."
-msgstr "Ëîêàëćí ïđèíòćđ"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for configured scanners ..."
-msgstr "Ëîêàëćí ïđèíòćđ"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scanner sharing"
-msgstr "Ïîäćëÿíć íà ôàéëîâć"
-
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Add a scanner manually"
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Search for new scanners"
-msgstr "Ëîêàëćí ïđèíòćđ"
+msgid "Creating bootdisk..."
+msgstr "Ńúçäàâàíć íà ńòàđòèđàùà äèńêćòà..."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr ""
+msgid "Wait please, testing your connection..."
+msgstr "Ïîśàêàéòć, ïđîáâàì âàűàòà âđúçêà..."
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
-msgstr "Íÿìàòć ìđćæîâ àäàïòćđ!"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Bringing down the network"
+msgstr "Èçêëțśâàíć íà ìđćæàòà"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr "Íÿìàòć ìđćæîâ àäàïòćđ!"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Login ID"
+msgstr "Ïîòđćáèòćëńêî èìć"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
msgstr ""
+"NFS ć ïîïóëÿđćí ïđîòîêîë çà îáìćí íà ôàéëîâć ïî TCP/IP ìđćæè.\n"
+"Òàçè óńëóăà îńèăóđÿâà ôóíêöèîíàëíîńòòà íà çàêëțśâàíćòî íà NFS ôàéëîâćòć."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "choose device"
-msgstr "èçáèđà óńòđîéńòâî"
+msgid "DHCP Client"
+msgstr "DHCP êëèćíò"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for scanners ..."
-msgstr "Ëîêàëćí ïđèíòćđ"
+msgid "dismiss"
+msgstr "îńòàâè"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Auto-detect available ports"
-msgstr "Èçïîëçâàé àâòîìàòèśíî çàńèśàíć"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing/Scanning on \"%s\""
+msgstr "Ïćśàòàí/Ńêàíèđàíćć íà \"%s\""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr ""
+msgid "omit raid modules"
+msgstr "áćç raid ìîäóëè"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
+"lpd ć äćìîíà çà ïćśàò íćîáőîäèì íà lpr äà đàáîòè íîđìàëíî. Òîé ïđîńòî ć\n"
+"ńúđâúđ, êîéòî îïđćäćëÿ đàáîòèòć çà ïćśàò íà ïđèíòćđ(à/èòć)."
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid "The %s is unsupported"
-msgstr "%s íć ńć ïîäúđæà"
-
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr ""
+msgid "Internet Connection Configuration"
+msgstr "Íàńòđîéêà íà Èíòćđíćò âđúçêà"
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
-msgstr "%s íć ńć ïîäúđæà îò òàçè âćđńèÿ íà Mandrake Linux."
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Port: %s"
-msgstr "Ïîđò"
+msgid "comma separated numbers"
+msgstr "íîìćđà đàçäćëćíè ńúń çàïćòàÿ"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ", "
+msgid ""
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Detected model: %s"
-msgstr "çàńćśćíà %s"
-
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid " ("
+msgid "Move selected rule up one level"
msgstr ""
#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Select a scanner model"
-msgstr "Èçáćđćòć ăđàôèśíà êàđòà"
+msgid ""
+"The following scanner\n"
+"\n"
+"%s\n"
+"is available on your system.\n"
+msgstr "Íÿìàòć ìđćæîâ àäàïòćđ!"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr "%s íć ć â áàçàòà äàííè íà ńêćíćđà, äà êîíôèăóđèđàì đúśíî?"
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "Íàèńòèíà ëè èńêàòć äà ïđćìàőíćòć ïđèíòćđà \"%s\" ?"
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "%s íàìćđćíî íà %s, äà êîíôèăóđèđàì àâòîìàòèśíî?"
+msgid "I can't find any room for installing"
+msgstr "Íć ìîăà äà íàìćđÿ íèêàêâî ìÿńòî çà èíńòàëàöèÿ"
-#: ../../standalone/service_harddrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hardware probing in progress"
-msgstr "Ïđîăđćń íà őàđäóćđíà ïđîáà"
+msgid "Default printer"
+msgstr "Ïđèíòćđ ïî ïîäđàçáèđàíć"
-#: ../../standalone/service_harddrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Some devices were added:\n"
+msgid ""
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
msgstr ""
+"Íàńòđîèëè ńòć íÿêîëêî íàśèíà çà âđúçêà êúì Èíòćđíćò.\n"
+"Èçáćđćòć òîçè, êîéòî èńêàòć äà èçïîëçâàòć.\n"
+"\n"
-#: ../../standalone/service_harddrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr ""
+msgid "Modify RAID"
+msgstr "Ìîäèôèöèđàé RAID"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
msgstr ""
+"Îòêđèòà ć ISDN PCI êàđòà, íî ń íćïîçíàò òèï. Ìîëÿ èçáćđćòć íÿêîÿ PCI êàđòà "
+"îò ńëćäâàùèÿò ćêđàí."
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../any.pm:1
#, c-format
-msgid "Welcome to the Open Source world."
-msgstr "Äîáđć äîűëè â ńâćòà íà Îòâîđćíèÿò Èçőîäćí êîä"
+msgid "Add user"
+msgstr "Äîáàâè ïîòđćáèòćë"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr "Áëàăîäàđèì âè, ść èçáđàőòć Mandrake Linux 9.1"
+msgid "RAID-disks %s\n"
+msgstr "RAID-äèńêîâć %s\n"
-#: ../../share/advertising/02-community.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
-msgstr ""
+msgid "Liberia"
+msgstr "Ëèáćđèÿ"
-#: ../../share/advertising/02-community.pl:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
msgstr ""
-"Êàêâî èńêàòć äà çíàćòć ïîâćść çà îáùíîńòòà íà Îòâîđćíèÿò èçőîäćí êîä? Âëćçòć "
-"â ńâćòà íà Ńâîáîäíèÿò Ńîôòóćđ"
-#: ../../share/advertising/02-community.pl:1
+#: ../../steps.pm:1
#, c-format
-msgid "Build the future of Linux!"
-msgstr ""
+msgid "Choose your keyboard"
+msgstr "Èçáîđ íà êëàâèàòóđà"
-#: ../../share/advertising/03-software.pl:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
-msgstr ""
-"Mandrake Linux 9.1 âè ïïîçâîëÿâà äà ïîëóśèòć íàé-ïîńëćäíèòć âćđńèè íà "
-"ńîôòóćđà, äà ńëóűàòć ìóçèêàëíè ôàéëîâć, äà îáđàáîòâàòć ôîòî è ăđàôèśíè "
-"ôàéëîâć, êàêòî è äà ăëćäàòć âèäćî."
+msgid "Format partitions"
+msgstr "Ôîđìàòèđàíć íà äÿëîâć"
-#: ../../share/advertising/03-software.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
-msgstr ""
+msgid "Automatic correction of CUPS configuration"
+msgstr "Àâòîìàòèśíà êîđćêöèÿ íà CUPS êîíôèăóđàöèÿ"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr ""
+msgid "Running \"%s\" ..."
+msgstr "Èçïúëíÿâà \"%s\" ..."
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
+msgid "enable radio support"
+msgstr "đàçđćűàâà ïîäđúæêà íà đàäèî"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "Êîíôèăóđàöèÿ íà Òćđìèíàëćí Ńúđâúđ â Mandrake "
+msgid "Scanner sharing to hosts: "
+msgstr "Ïîäćëÿíć íà ôàéëîâć"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Loopback file name: %s"
+msgstr "Èìć íà loopback ôàéëà: %s"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
-msgstr ""
-"Mandrake Linux 9.1 âè ïđćäîńòàâÿ 11 ïîòđćáèòćëńêè èíòćđôćéńà êîèòî ìîăàò äà "
-"áúäàò íàïúëíî ìîäèôèöèđàíè: KDE 3, Gnome 2, WindowMaker, ..."
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "Ìîëÿ, èçáćđćòć ńćđèćí ïîđò êúì êîéòî ńâúđçàí ìîäćìúò âè."
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "A customizable environment"
-msgstr ""
+msgid "Do not transfer printers"
+msgstr "Íć ïđćőâúđëÿé ïđèíòćđè"
-#: ../../share/advertising/06-development.pl:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Delay before booting the default image"
+msgstr "Çàáàâÿíć ïđćäè ńòàđòèđàíćòî íà ïîäđàçáèđàùèÿò îáđàç"
+
+#: ../../standalone/drakfont:1
#, c-format
msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+" DUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
msgstr ""
-#: ../../share/advertising/06-development.pl:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check for multisession CD"
+msgstr "Ìîëÿ, öúêíćòć íà íîńèòćëÿ"
+
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr "Mandrake Linux 9.1 ć íćïđćêúńíàòî đàçđàáîòâàùà ńć ïëàòôîđìà"
+msgid "user"
+msgstr "Ïîòđćáèòćë"
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use Hard Disk to backup"
+msgstr "Èçïîëçâà òâúđä äèńê çà đćçćđâíî êîïèć"
+
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
+#, c-format
+msgid "Configure"
+msgstr "Íàńòđîêà"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scannerdrake"
+msgstr "Èçáćđćòć ăđàôèśíà êàđòà"
+
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"Ïđćâđúùà âàűàòà ìàűèíà â ìîùćí Linux ńúđâúđ ń íÿêîëêî öúêâàíèÿ íà ìèűêàòà: "
-"Web ńúđâúđ, ïîùà, firewall, router, ôàéëîâ è ïđèíò ńúđâúđ, ..."
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Turn your computer into a reliable server"
-msgstr "Ïđćâúđíćòć âàűàòà ìàűèíà â íàäćæäćí ńúđâúđ"
+msgid "Backup Users"
+msgstr "Đćçćđâíî êîïèć íà ïîòđćáèòćëè"
-#: ../../share/advertising/08-store.pl:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
msgstr ""
-"Íàűèòć ïúëíè đćűćíèÿ, êàêòî è ńïćöèàëíè ïđćäëîæćíèÿ íà ïđîäóêòè è äđóăè "
-"\"ëàêîìńòâà\" ńà äîńòúïíè â íàűèÿò 'e-èçòîśíèê':"
+"Ìîëÿ, âúâćäćòć host name çà ìàűèíàòà.\n"
+"Host èìćòî òđÿáâà äà áóäć íàïúëíî êâàëèôèöèđàíî èìć,\n"
+"êàòî ``mybox.mylab.myco.com''.\n"
+"Ìîæćòć ńúùî äà âúâćäćòć IP àäđćńà íà Âàűèÿ gateway, àêî èìàòć òàêúâ"
-#: ../../share/advertising/08-store.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The official MandrakeSoft Store"
-msgstr "Îôèöèàëíèÿò èçòîśíèê íà MandrakeSoft "
+msgid "Select Printer Spooler"
+msgstr "Èçáćđćòć ïđèíòćđćí spooler"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
+msgid "Create new theme"
+msgstr "Ńúçäàâà íîâà òćìà"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Mandrake Tools Explanation"
msgstr ""
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "No image found"
+msgstr "Ëîêàëćí ïđèíòćđ"
+
+#: ../../install_steps.pm:1
#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
+msgid ""
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
msgstr ""
+"Íÿêîè âàæíè ïàêćòè íć ńć èíńòàëèđàőà êàêòî òđÿáâà.\n"
+"Èëè CDROM óńòđîéńòâîòî âè èëè êîìïàêò äèńêà âè ć äćôćêòćí.\n"
+"Ïđîâćđćòć êîìïàêò äèńêà íà èíńòàëèđàíèÿ êîìïțòúđ èçïîëçâàéêè \"rpm -qpl "
+"Mandrake/RPMS/*.rpm\"\n"
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Detected model: %s"
+msgstr "çàńćśćíà %s"
+
+#: ../../standalone/drakedm:1
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Optimize your security by using Mandrake Linux"
-msgstr "Îïòèìèçèđà âàűàòà ńèăóđíîńò"
+msgid "if set to yes, run the daily security checks."
+msgstr ""
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr "Òîçè ïđîäóêò ć äîńòúïćí îò web ńàéòà íà MandrakeStore"
+msgid "Azerbaijan"
+msgstr "Àçćđáàéäæàí"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
+msgid "No tape in %s!"
msgstr ""
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr ""
+msgid "Dvorak (US)"
+msgstr "Äâîđàê (US)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""
+"òîâà ć ôèçèśćńêàòà űèíà íà êîéòî ć çàêàśćíî óńòđîńòâîòî (íàïđ: PCI, USB, ...)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr "íàìćđćòć đćűćíèÿ íà âàűèòć ïđîáëćìè ń ïîäđúæêàòà íà MandrakeSoft"
+msgid "How is the printer connected?"
+msgstr "Êàê ć ńâúđçàí ïđèíòćđúò ?"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Become a MandrakeExpert"
-msgstr "Ńòàíćòć MandrakeExpert"
+msgid "Security level"
+msgstr "Íèâî íà ńèăóđíîńò"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
-#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr ""
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "final resolution"
+msgstr "Đàçäćëèòćëíà ńïîńîáíîńò"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr ""
+msgid "Services"
+msgstr "Óńëóăè"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "MandrakeExpert îáćäèíÿâà"
+msgid "4 MB"
+msgstr "4 ÌÁ"
#: ../../share/compssUsers:999
msgid "Office Workstation"
@@ -18067,10 +18141,6 @@ msgstr ""
"ïđćăëćä íà PDF, è ò.í."
#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Đàáîòíà ńòàíöèÿ"
-
-#: ../../share/compssUsers:999
msgid "Game station"
msgstr "Èăđàëíà ńòàíöèÿ"
@@ -18143,10 +18213,6 @@ msgstr ""
"èíńòđóìćíòè"
#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Ăđàôèśíà ńđćäà"
-
-#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Gnome đàáîòíà ńòàíöèÿ"
@@ -18166,10 +18232,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm è ò.í."
#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Đàçđàáîòêà"
-
-#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "Áèáëèîòćêè çà đàçđàáîòêà íà C è C++, ïđîăđàìè è include ôàéëîâć"
@@ -18241,40 +18303,94 @@ msgstr "NFS ńúđâúđ, SMB ńúđâúđ, Proxy ńúđâúđ, SSH ńúđâúđ"
#: ../../share/compssUsers:999
#, fuzzy
-msgid "Audio station"
-msgstr "Ìóòèìćäèéíà ńòàíöèÿ"
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr ""
+"Íàáîđ îò èíńòđóìćíòè çà śćòćíć è èçïđàùàíć íà ïîùà è íîâèíè (pine, mutt, "
+"tin..) è çà îáèêàëÿíć èç Ìđćæàòà"
+
+#~ msgid "Internet connection & configuration"
+#~ msgstr "Èíòćđíćò âđúçêà è íàńòđîéêà"
+
+#~ msgid "Configure the connection"
+#~ msgstr "Êîíôèăóđèđàíć íà âđúçêàòà"
+
+#~ msgid "Disconnect"
+#~ msgstr "Îòâúđæè"
+
+#~ msgid "Connect"
+#~ msgstr "Ńâúđæè"
+
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Ìîæćòć äà ïđćíàńòđîèòć âđúçêàòà."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Ìîæćòć äà ńć ńâúđæćòć êúì Èíòćđíćò èëè äà ïđćíàńòđîèòć âđúçêàòà."
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "Â ìîìćíòà íć ńòć ńâúđçàíè êúì Èíòćđíćò"
+
+#~ msgid ""
+#~ "\n"
+#~ "You can disconnect or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Ìîæćòć äà ńć îòâúđæćòć èëè äà ïđćíàńòđîèòć âđúçêàòà."
+
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "Â ìîìćíòà ńòć ńâúđçàíè êúì Èíòćđíćò"
+
+#~ msgid "files sending by FTP"
+#~ msgstr "ôàéëîâć èçïđàòćíè ïî FTP"
+
+#~ msgid "Relaunch 'lilo'"
+#~ msgstr "Ïđćńòàđòèđà 'lilo'"
+
+#~ msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+#~ msgstr "Ïđàâè initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+
+#~ msgid "Write %s"
+#~ msgstr "Ïèűć %s"
+
+#~ msgid "Copy %s to %s"
+#~ msgstr "Êîïèđà %s â %s"
+
+#~ msgid "Backup %s to %s.old"
+#~ msgstr "Đćçćđâíî êîïèć %s â %s.old"
+
+#~ msgid "Author:"
+#~ msgstr "Àâòîđ:"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Sound playing/editing programs"
-msgstr "Ïđîăđàìè çà ïóńêàíć/ïîïđàâÿíć íà çâóê è âèäćî"
+#~ msgid "Audio station"
+#~ msgstr "Ìóòèìćäèéíà ńòàíöèÿ"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Video station"
-msgstr "Èăđàëíà ńòàíöèÿ"
+#~ msgid "Sound playing/editing programs"
+#~ msgstr "Ïđîăđàìè çà ïóńêàíć/ïîïđàâÿíć íà çâóê è âèäćî"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Video playing programs"
-msgstr "Ïđîăđàìè çà ïóńêàíć/ïîïđàâÿíć íà çâóê è âèäćî"
+#~ msgid "Video station"
+#~ msgstr "Èăđàëíà ńòàíöèÿ"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Graphic station"
-msgstr "Èăđàëíà ńòàíöèÿ"
+#~ msgid "Video playing programs"
+#~ msgstr "Ïđîăđàìè çà ïóńêàíć/ïîïđàâÿíć íà çâóê è âèäćî"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Graphics programs"
-msgstr "Ăđàôèśíè ïđîăđàìè êàòî The Gimp"
+#~ msgid "Graphic station"
+#~ msgstr "Èăđàëíà ńòàíöèÿ"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr ""
-"Íàáîđ îò èíńòđóìćíòè çà śćòćíć è èçïđàùàíć íà ïîùà è íîâèíè (pine, mutt, "
-"tin..) è çà îáèêàëÿíć èç Ìđćæàòà"
+#~ msgid "Graphics programs"
+#~ msgstr "Ăđàôèśíè ïđîăđàìè êàòî The Gimp"
#~ msgid "Printer sharing"
#~ msgstr "Ïîäćëÿíć íà ïđèíòćđ"
@@ -18731,7 +18847,7 @@ msgstr ""
#~ "\n"
#~ "Please choose your preferred language for installation and system usage.\n"
#~ "\n"
-#~ "Clicking on the \"Advanced\" button will allow you to select other\n"
+#~ "Clicking on the \"%s\" button will allow you to select other\n"
#~ "languages to be installed on your workstation. Selecting other languages\n"
#~ "will install the language-specific files for system documentation and\n"
#~ "applications. For example, if you host users from Spain on your machine,\n"
@@ -19133,8 +19249,7 @@ msgstr ""
#~ "Click on \"Cancel\" if you want to choose another partition for your new\n"
#~ "Mandrake Linux operating system installation.\n"
#~ "\n"
-#~ "Click on \"Advanced\" if you wish to select partitions that will be "
-#~ "checked\n"
+#~ "Click on \"%s\" if you wish to select partitions that will be checked\n"
#~ "for bad blocks on the disk."
#~ msgstr ""
#~ "Âńèśêè íîâîäćôèíèđàíè äÿëîâć òđÿáâà äà áúäàò ôîđìàòèđàíè, çà äà ńć "
@@ -19175,7 +19290,7 @@ msgstr ""
#~ "GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
#~ "soon as the computer has booted up again.\n"
#~ "\n"
-#~ "The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
+#~ "The \"%s\" button (in Expert mode only) shows two more buttons to:\n"
#~ "\n"
#~ " * \"generate auto-install floppy\": to create an installation floppy "
#~ "disk\n"
@@ -19962,8 +20077,7 @@ msgstr ""
#~ "are\n"
#~ "finish adding all the users you want, select \"Done\".\n"
#~ "\n"
-#~ "Clicking the \"Advanced\" button allows you to change the default \"shell"
-#~ "\"\n"
+#~ "Clicking the \"%s\" button allows you to change the default \"shell\"\n"
#~ "for that user (bash by default).\n"
#~ "\n"
#~ "When you are finished adding all users, you will be proposed to choose a\n"
@@ -20018,9 +20132,6 @@ msgstr ""
#~ "ïîäđàçáèđàíć íà\n"
#~ "ïîòđćáèòćëÿ (bash ïî ïîäđàçáèđàíć)."
-#~ msgid "Upgrade"
-#~ msgstr "Îáíîâÿâàíć"
-
#~ msgid "Palestina"
#~ msgstr "Ïàëćńòèíà"
diff --git a/perl-install/share/po/bs.po b/perl-install/share/po/bs.po
index 75641c37f..1ebb62863 100644
--- a/perl-install/share/po/bs.po
+++ b/perl-install/share/po/bs.po
@@ -5,7 +5,7 @@
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
"PO-Revision-Date: 2003-03-15 18:00--800\n"
"Last-Translator: Vedran Ljubović <vljubovic@smartnet.ba>\n"
"Language-Team: Bosnian <lokal-subscribe@lugbih.org>\n"
@@ -13,960 +13,1810 @@ msgstr ""
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Scanning partitions to find mount points"
+msgstr "PretraĆŸujem particije da nađem tačke montiranja"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of suid root files."
+msgstr ""
+"ako je postavljeno na da, provjerava dodavanje/brisanje suid root datoteka."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t\tErase=%s"
+msgstr "\t\tObriĆĄi=%s"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "network printer port"
+msgstr "port mreĆŸnog ĆĄtampača"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Please insert floppy disk:"
+msgstr "Molimo ubacite disketu:"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "PCMCIA"
+msgstr "PCMCIA"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
+"The backup partition table has not the same size\n"
+"Still continue?"
msgstr ""
-"Dijeljenje po-korisniku koristi grupu \"fileshare\". \n"
-"MoĆŸete dodavati korisnike u ovu grupu pomoću userdrake-a."
+"Backup tabela particija nema istu veličinu\n"
+"Ipak nastavljate?"
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Cancel"
-msgstr "Odustani"
+msgid "Which username"
+msgstr "Koje korisničko ime"
#: ../../any.pm:1
#, c-format
-msgid "Launch userdrake"
-msgstr "Pokreni userdrake"
+msgid "Which type of entry do you want to add?"
+msgstr "Koju vrstu opcije ĆŸelite dodati?"
-#: ../../any.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Restore partition table"
+msgstr "Vrati tabelu particija"
+
+#: ../../printer/cups.pm:1
+#, c-format
+msgid "On CUPS server \"%s\""
+msgstr "Na CUPS serveru \"%s\""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Post-install configuration"
+msgstr "Post-instalacijsko podeĆĄavanje"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``%s'' instead"
+msgstr "Koristi ``%s'' umjesto toga"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Type"
+msgstr "Tip"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
"\n"
-"\"Custom\" permit a per-user granularity.\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
msgstr ""
-"Ćœelite li dozvoliti korisnicima da dijele (share) neke od njihovih "
-"direktorija?\n"
-"Ako uključite ovu opciju, korisnici će moći jednostavno kliknuti na opciju "
-"\"Share\" u\n"
-"Konqueroru ili Nautilusu.\n"
"\n"
-"\"Prilagođeno\" vam omogućuje da podesite ovu opciju zasebno za svakog "
-"korisnika.\n"
+"Također ơtampači konfigurisani sa PPD datotekama koje su osigurali njihovi "
+"proizvođači ili sa vlastitim CUPS drajverima ne mogu biti prebačeni."
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Nedostaje obavezan paket %s"
+msgid "Sri Lanka"
+msgstr "Ć ri Lanka"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
-"MoĆŸete eksportovati koristeći NFS ili Sambu. Molim izaberite koji ĆŸelite "
-"koristiti."
+"Sljedeći ơtampač\n"
+"\n"
+"%s%s\n"
+"su direktno spojeni na vaĆĄ sistem"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Paket %s treba biti instaliran. Da li ga ĆŸelite instalirati?"
+msgid "Central African Republic"
+msgstr "Centralnoafrička Republika"
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Custom"
-msgstr "Ručno izaberi"
+msgid "Gateway device"
+msgstr "Gateway uređaj"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Allow all users"
-msgstr "Dozvoli svim korisnicima"
+msgid "Net Method:"
+msgstr "Net Method:"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "No sharing"
-msgstr "Bez dijeljenja"
+msgid "Ethernetcard"
+msgstr "Ethernet kartica"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "More"
-msgstr "JoĆĄ"
+msgid "Parameters"
+msgstr "Parametri"
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Here is the full list of available countries"
-msgstr "Ovdje je puna lista svih dostupnih drĆŸava"
+msgid "Auto-detect"
+msgstr "Auto prepoznavanje"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please choose your country."
-msgstr "Molim izaberite vaĆĄu zemlju."
+msgid "Interface:"
+msgstr "Interfejs:"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid " / Region"
-msgstr "Reunion"
+#: ../../steps.pm:1
+#, c-format
+msgid "Select installation class"
+msgstr "Izaberite klasu instalacije"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Country"
-msgstr "Zemlja"
+msgid "on CDROM"
+msgstr "na CDROMu"
-#: ../../any.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "All languages"
-msgstr "Svi jezici"
+msgid ""
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
+msgstr ""
+"Izgleda da sistem nije spojen na Internet.\n"
+"Probajte promijeniti postavke vaĆĄe konekcije."
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use Unicode by default"
-msgstr "Podrazumijeva se Unicode"
+msgid ""
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
+msgstr ""
+"Povezati ơtampač na Linux server i dopustiti Windows računarima da se "
+"spajaju na njega kao klijenti.\n"
+"\n"
+"Da li zaista ĆŸelite nastaviti sa podeĆĄavanjem ĆĄtampača kako ste započeli?"
-#: ../../any.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Belarus"
+msgstr "Bjelorusija"
+
+#: ../../partition_table.pm:1
+#, c-format
+msgid "Error writing to file %s"
+msgstr "GreĆĄka u pisanju datoteke: %s"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
msgstr ""
-"Mandrake Linux podrĆŸava viĆĄe jezika. Izaberite jezike koje\n"
-"ĆŸelite instalirati. Oni će biti dostupni kada se zavrĆĄi vaĆĄa\n"
-"instalacija i restartujete vaĆĄ sistem."
+"Apmd se koristi za nadgledanje statusa baterija i njegovo biljeĆŸenje preko\n"
+"sysloga. Takođe se moĆŸe koristiti za gaĆĄenje računara kada su baterije pri "
+"kraju."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose a language to use."
-msgstr "Molimo izaberite jezik koji ćete koristiti."
+msgid "Use tape to backup"
+msgstr "Koristi traku za backup"
-#: ../../any.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Choose the window manager to run:"
-msgstr "Izaberite window manager koji će se pokretati:"
+msgid "The following packages are going to be installed"
+msgstr "Sljedeći paketi će biti instalirani"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the default user:"
-msgstr "Izaberite default korisnika:"
+msgid "CUPS configuration"
+msgstr "PodeĆĄavanje CUPSa"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to use this feature?"
-msgstr "Da li ĆŸelite koristiti ovu mogućnost?"
+msgid "Hong Kong"
+msgstr "Hong Kong"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr "Mogu podesiti vaơ računar da automatski prijavi jednog korisnika."
+msgid "Not enough free space to allocate new partitions"
+msgstr "Nema dovoljno slobodnog prostora za pravljenje novih particija"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Autologin"
-msgstr "Autologin"
+msgid "Moving"
+msgstr "PremjeĆĄtam"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Icon"
-msgstr "Ikona"
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
+msgstr ""
+"\n"
+"Drakbackup aktivnosti putem %s:\n"
+"\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Shell"
-msgstr "Shell"
+msgid "("
+msgstr "("
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Password (again)"
-msgstr "Ć ifra (ponovo)"
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgstr ""
+"Dobro doĆĄli u Čarobnjak za podeĆĄavanje mreĆŸe\n"
+"\n"
+"Sada ćemo podesiti vaĆĄu internet/mreĆŸnu konekciju.\n"
+"Ako ne ĆŸelite da koristite automatsko prepoznavanje, isključite opciju.\n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "Password"
-msgstr "Ć ifra"
+msgid ")"
+msgstr ")"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "User name"
-msgstr "Korisničko ime"
+msgid "Lebanon"
+msgstr "Liban"
-#: ../../any.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Real name"
-msgstr "Pravo ime"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Accept user"
-msgstr "Prihvati korisnika"
+msgid "Stop"
+msgstr "Stop"
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Done"
-msgstr "Gotovo"
+msgid "Edit selected host"
+msgstr "Izmijeni izabrani računar"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "No CD device defined!"
+msgstr "Nije definisan CD uređaj!"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Bulgarian (phonetic)"
+msgstr "Bugarska (fonetska)"
+
+#: ../../standalone/drakpxe:1
+#, c-format
+msgid "The DHCP start ip"
+msgstr "Početna DHCP adresa"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "256 kB"
+msgstr "256 kB"
#: ../../any.pm:1
#, c-format
+msgid "Bootloader main options"
+msgstr "Glavne opcije bootloadera"
+
+#: ../../standalone.pm:1
+#, c-format
msgid ""
-"Enter a user\n"
-"%s"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
msgstr ""
-"Unesite korisnika\n"
-"%s"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Add user"
-msgstr "Dodaj korisnika"
+msgid "Tape"
+msgstr "Traka"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This user name has already been added"
-msgstr "Ovo korisničko ime je već dodano"
+msgid "Scanning network..."
+msgstr "PretraĆŸujem mreĆŸu..."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The user name is too long"
-msgstr "Korisničko ime je predugačko"
+msgid ""
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
+msgstr ""
+"Sa ovom opcijom bićete u mogućnosti da vratite bilo koju\n"
+" verziju vaĆĄeg /etc direktorija."
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Korisničko ime smije sadrĆŸati samo mala slova, brojeve, `-' i `_'"
+msgid "Malaysia"
+msgstr "Malezija"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please give a user name"
-msgstr "Molimo navedite korisničko ime"
+msgid "Swiss (French layout)"
+msgstr "Ć vicarska (francuski izgled)"
-#: ../../any.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "This password is too simple"
-msgstr "Ova ĆĄifra je previĆĄe jednostavna"
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "mkraid nije uspio (moĆŸda nedostaju raidtools?)"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Webcam"
+msgstr "Web kamera"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "size of the (second level) cpu cache"
+msgstr "Veličina CPU keơa (drugog nivoa)"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Soundcard"
+msgstr "Zvučna kartica"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
+msgstr ""
+"Za ĆĄtampanje datoteke sa komandne linije (terminalski prozor) koristite "
+"komandu \"%s <datoteka>\".\n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please try again"
-msgstr "Molimo pokuĆĄajte ponovo"
+msgid "Level %s\n"
+msgstr "Nivo %s\n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The passwords do not match"
-msgstr "Ć ifre se ne poklapaju"
+msgid "Luxembourg"
+msgstr "Luksemburg"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "(already added %s)"
-msgstr "(već dodan %s)"
+msgid ""
+"\n"
+" DrakBackup Daemon Report\n"
+"\n"
+"\n"
+msgstr ""
+"\n"
+" DrakBackup IzvjeĆĄtaj o demonima\n"
+"\n"
+"\n"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to compilation tools"
-msgstr "pristup alatima za kompajliranje"
+msgid "Iran"
+msgstr "Iran"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "access to network tools"
-msgstr "pristup mreĆŸnim alatima"
+msgid "Bus"
+msgstr "Sabirnica"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to administrative files"
-msgstr "pristup administrativnim datotekama"
+msgid "Iraq"
+msgstr "Irak"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "allow \"su\""
-msgstr "dozvoli \"su\""
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr ""
+"Potencijalan konflikt LAN adresa pronađen u trenutnoj konfiguraciji %s!\n"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "access to rpm tools"
-msgstr "pristup rpm alatima"
+msgid "Configuring..."
+msgstr "PodeĆĄavam..."
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "access to X programs"
-msgstr "pristup X programima"
+msgid "The setup has already been done, and it's currently enabled."
+msgstr "Podeơavanje je već zavrơeno i trenutno je uključeno."
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
msgstr ""
-"Ovo su trenutne opcije u vaĆĄem boot meniju.\n"
-"MoĆŸete dodati nove ili promijeniti postojeće."
+"Za većinu modernih TV kartica, bttv modul Linux kernela automatski "
+"prepoznaje odgovarajuće parametre.\n"
+"Ako je vaĆĄa kartica pogreĆĄno prepoznata, ovdje moĆŸete prisiliti odgovarajući "
+"tip tunera i kartice. Samo izaberite parametre vaĆĄe TV karte."
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Other OS (windows...)"
-msgstr "Ostali OSi (Windows...)"
+msgid "Password (again)"
+msgstr "Ć ifra (ponovo)"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Ostali OSi (MacOS...)"
+msgid "Search installed fonts"
+msgstr "PretraĆŸi instalirane fontove"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Ostali OSi (SunOS...)"
+msgid "Venezuela"
+msgstr "Venecuela"
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Linux"
-msgstr "Linux"
+msgid "IP address"
+msgstr "IP adresa"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Koju vrstu opcije ĆŸelite dodati?"
+msgid "Choose the sizes"
+msgstr "Izaberite veličine"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This label is already used"
-msgstr "Ova oznaka je već u upotrebi"
+msgid ""
+"List of data corrupted:\n"
+"\n"
+msgstr ""
+"Lista oơtećenih podataka:\n"
+"\n"
-#: ../../any.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "You must specify a root partition"
-msgstr "Morate navesti root particiju"
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
+msgstr ""
+"VaĆĄ modem nije podrĆŸan pod ovim sistemom.\n"
+"Pogledajte http://www.linmodems.org"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You must specify a kernel image"
-msgstr "Morate navesti image kernela"
+msgid "Choose another partition"
+msgstr "Izaberi drugu particiju"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Empty label not allowed"
-msgstr "Prazna oznaka nije dozvoljena"
+msgid "Current user"
+msgstr "Trenutni korisnik"
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Default"
-msgstr "Default"
+msgid "Username"
+msgstr "Korisničko ime"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "NoVideo"
-msgstr "NoVideo"
+msgid "Left \"Windows\" key"
+msgstr "Lijeva \"Windows\" tipka"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Initrd-size"
-msgstr "Initrd-veličina"
+msgid "dhcpd Server Configuration"
+msgstr "PodeĆĄavanje dhcpd servera"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Append"
-msgstr "Append"
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
+msgstr ""
+"Koristi se za direktorij:\n"
+" samo vlasnik tog direktorija ili datoteke u ovom direktoriju ga moĆŸe "
+"obrisati"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Label"
-msgstr "Oznaka"
+msgid "Guyana"
+msgstr "Gvajana"
-#: ../../any.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Unsafe"
-msgstr "Nesigurno"
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr "na Novell serveru \"%s\", ơtampač \"%s\""
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Table"
-msgstr "Tabela"
+msgid "Remove a module"
+msgstr "Ukloni modul"
+
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Password"
+msgstr "Ć ifra"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
+msgstr ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Advanced Configuration"
+msgstr "Napredno podeĆĄavanje"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Scanning on your HP multi-function device"
+msgstr "Skeniram pomoću HP multifunkcijskog uređaja"
#: ../../any.pm:1
#, c-format
msgid "Root"
msgstr "Root"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Read-write"
-msgstr "Čitaj-piơi"
+msgid "Choose an existing RAID to add to"
+msgstr "Izaberite postojeći RAID na koji ćete dodati"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "Turska (moderni \"Q\" model)"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Video mode"
-msgstr "Video mod"
+msgid "Lilo message not found"
+msgstr "Nisam pronaĆĄao Lilo poruku."
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Image"
-msgstr "Image"
+msgid ""
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
+msgstr ""
+"Automatsko regenerisanje kernel zaglavlja u /boot za\n"
+"/usr/include/linux/{autoconf,version}.h"
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Default OS?"
-msgstr "Podrazumjevani OS?"
+msgid "if needed"
+msgstr "ako je potrebno"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Enable OF Boot?"
-msgstr "Omogući boot sa OFa?"
+msgid "Restore Failed..."
+msgstr "Vraćanje nije uspjelo..."
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Enable CD Boot?"
-msgstr "Omogući boot sa CDa?"
+msgid "/Autodetect _jazz drives"
+msgstr "/Automatski prepoznaj _jazz uređaje"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Description:\n"
+"\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
+"\n"
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
+"\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
+"\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
+"\n"
+"\n"
+msgstr ""
+"Description:\n"
+"\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
+"\n"
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
+"\n"
+" Per default all backup will be stored on your\n"
+" /var/lib/drakbackup directory\n"
+"\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
+"\n"
+"\n"
+
+#: ../../install_messages.pm:1
#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Vrijeme za boot kernela"
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
+msgstr ""
+"Budući da prevodilac ovog teksta nije u mogućnosti da osigura pravnu\n"
+"provjeru prevedenog teksta, tekst licence je ostavljen u originalnom "
+"(engleskom)\n"
+"obliku.\n"
+"\n"
+"\n"
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
-#: ../../any.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Open Firmware Delay"
-msgstr "Čekanje na Open Firmware"
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
+msgstr ""
+"koordinate progresne trake x\n"
+"tj. njenog lijevog ugla"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Boot device"
-msgstr "Boot uređaj"
+msgid "Current interface configuration"
+msgstr "Postavke trenutnog interfejsa"
-#: ../../any.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Init Message"
-msgstr "Init poruka"
+msgid "LPD - Line Printer Daemon"
+msgstr "LPD - Line Printer Daemon"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Bootloader to use"
-msgstr "Bootloader koji ćete koristiti"
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
+msgstr ""
+"\n"
+"Ako imate ISA karticu, vrijednosti na idućem ekranu bi trebale biti "
+"ispravne.\n"
+"\n"
+"Ako imate PCMCIA karticu, moraćete znati IRQ i IO vaơe kartice.\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Bootloader main options"
-msgstr "Glavne opcije bootloadera"
+msgid "Do not print any test page"
+msgstr "Nemoj ĆĄtampati testnu stranicu"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Opcija ``Ograniči opcije komandne linije'' je beskorisna bez ơifre"
+msgid "Gurmukhi"
+msgstr "Gurmukhi"
#: ../../any.pm:1
#, c-format
-msgid "Give the ram size in MB"
-msgstr "Navedite veličinu rama u MB"
+msgid "Force No APIC"
+msgstr "Prinudi bez APICa"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Enable multiple profiles"
-msgstr "Omogući viơe profila"
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr ""
+"Ova ĆĄifra je previĆĄe jednostavna (mora biti duga najmanje %d karaktera)"
-#: ../../any.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Precizna veličina RAMa ako je potrebno (pronađeno %d MB)"
+msgid "[keyboard]"
+msgstr "[tastatura]"
-#: ../../any.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Očisti /tmp prilikom svakog boota"
+msgid "FTP proxy"
+msgstr "FTP proxy"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Create a bootdisk"
-msgstr "Napravite boot disketu"
+msgid "Install List"
+msgstr "Lista instalacije"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "restrict"
-msgstr "ograniči"
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr ""
+"Promijeni\n"
+"stazu vraćanja"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Restrict command line options"
-msgstr "Ograniči opcije komandne linije"
+msgid "Show only for the selected day"
+msgstr "PrikaĆŸi samo za izabrani dan"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Force No APIC"
-msgstr "Prinudi bez APICa"
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
+"\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
+"\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Enable ACPI"
-msgstr "Uključi ACPI"
+msgid "512 kB"
+msgstr "512 kB"
-#: ../../any.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Delay before booting default image"
-msgstr "Čekanje prije bootanja default image-a"
+msgid "Logs"
+msgstr "Dnevnici"
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "compact"
-msgstr "kompaktno"
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr "(Napomena: Paralelni portovi ne mogu biti automatski istraĆŸeni)"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Compact"
-msgstr "Kompaktno"
+msgid "<control>N"
+msgstr "<control>N"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Bootloader installation"
-msgstr "Instalacija bootloadera"
+msgid "What kind of card do you have?"
+msgstr "Koju vrstu kartice imate?"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "First sector of boot partition"
-msgstr "Prvi sektor boot particije"
+msgid "<control>O"
+msgstr "<control>O"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Prvi sektor diska (MBR)"
+msgid "Security"
+msgstr "Sigurnost"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Gdje ĆŸelite smjestiti bootloader?"
+msgid ""
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
+msgstr ""
+"MoĆŸete također koristiti grafički interfejs \"xpdq\" za podeĆĄavanje opcija i "
+"upravljanje zadacima ĆĄtampe.\n"
+"Ako koristite KDE okruĆŸenje radne povrĆĄine imate \"dugme za paniku\". To je "
+"ikona na radnoj povrơini čiji je naziv \"ZAUSTAVI ơtampač!\", koja "
+"zaustavlja sve zadatke ĆĄtampe odmah kada kliknete na nju. Ovo je korisno "
+"npr. u slučaju zaglavljivanja papira.\n"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "LILO/grub Installation"
-msgstr "LILO/grub instalacija"
+msgid "<control>Q"
+msgstr "<control>Q"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "SILO Installation"
-msgstr "SILO instalacija"
+msgid "Unknown"
+msgstr "Nepoznat"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Skip"
-msgstr "Preskoči"
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr "Ovaj server je već na listi, ne moĆŸete ga ponovo dodati.\n"
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "On Floppy"
-msgstr "Na disketi"
+msgid "Network Configuration"
+msgstr "PodeĆĄavanje mreĆŸe"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "First sector of the root partition"
-msgstr "Prvi sektor root particije"
+msgid "<control>S"
+msgstr "<control>S"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
msgstr ""
-"Odlučili ste da na particiju instalirate bootloader.\n"
-"Ovo podrazumijeva da već imate bootloader na hard disku sa kojeg bootate "
-"(npr: System Commander).\n"
-"\n"
-"Sa kojeg diska vrĆĄite boot?"
+"Protokol za ostatak svijeta \n"
+" bez D-kanala (iznajmljene linije)"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Creating bootdisk..."
-msgstr "Pravim boot disketu..."
+msgid "Option %s must be a number!"
+msgstr "Opcija %s mora biti broj!"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Ubacite disketu u %s"
+msgid "Notice"
+msgstr "Napomena"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
msgstr ""
-"Izaberite disketnu jedinicu koju ĆŸelite koristiti da napravite boot disketu"
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Second floppy drive"
-msgstr "Druga disketna jedinica"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "First floppy drive"
-msgstr "Prva disketna jedinica"
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr "Niste podesili X. Sigurno ĆŸelite uraditi ovo?"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "Ćœao mi je, nema disketne jedinice"
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
+"Podeơavanje ơtampača će raditi potpuno automatski. Ako vaơ ơtampač nije "
+"ispravno prepoznat ili ako ĆŸelite sami podesiti ĆĄtampač, uključite \"Ručno "
+"podeĆĄavanje\"."
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "What type of partitioning?"
+msgstr "Koju vrstu particioniranja?"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
+"file list sent by FTP: %s\n"
+" "
msgstr ""
-"Vlastita boot disketa vam omogućuje da pokrenete Linux pri čemu ne ovisite\n"
-"od bootloader programa. Ovo je korisno ako ne ĆŸelite instalirati LILO (ili "
-"grub) na\n"
-"vaĆĄ sistem, ako neki drugi operativni sistem uklanja LILO ili ako LILO ne "
-"radi\n"
-"na vaĆĄoj trenutnoj konfiguraciji. Vlastiti bootdisk se moĆŸe takođe koristiti "
-"sa\n"
-"Mandrake rescue image, pri čemu je mnogo lakơe ispraviti neke ozbiljne\n"
-"sistemske kvarove. Ćœelite li napraviti boot disketu za vaĆĄ sistem?\n"
-"%s"
+"lista datoteka poslana putem FTPa: %s\n"
+" "
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
+msgid "Interface"
+msgstr "Interfejs"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
+"Options Description:\n"
"\n"
+" - Backup System Files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Backup User Files: \n"
+"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
+"\n"
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane. To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
msgstr ""
+"options description:\n"
+"\n"
+" - Backup system files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Backup User files: \n"
+"\n"
+"\tThis option allows you select all users that you want \n"
+"\tto backup.\n"
+"\tTo preserve disk space, it is recommended that you \n"
+"\tdo not include the web browser's cache.\n"
+"\n"
+" - Backup Other files: \n"
+"\n"
+"\tThis option allows you to add more data to save.\n"
+"\tWith the other backup it's not possible at the \n"
+"\tmoment to select incremental backup.\t\t\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful \n"
+"\toption for backup. This option allows you \n"
+"\tto backup all your data the first time, and \n"
+"\tonly the changed data afterward.\n"
+"\tThen you will be able, during the restore\n"
+"\tstep, to restore your data from a specified\n"
+"\tdate.\n"
+"\tIf you have not selected this option all\n"
+"\told backups are deleted before each backup. \n"
"\n"
"\n"
-"(PAĆœNJA! Vi koristite XFS za vaĆĄu root particiju,\n"
-"pravljenje boot diskete na 1.44 Mb disketi vjerovatno neće\n"
-"raditi, poĆĄto XFS traĆŸi veoma velik drajver)."
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
msgstr ""
-"Vlastita boot disketa vam omogućuje da pokrenete Linux pri čemu ne ovisite\n"
-"od bootloader programa. Ovo je korisno ako ne ĆŸelite instalirati SILO na\n"
-"vaĆĄ sistem, ako neki drugi operativni sistem uklanja SILO ili ako SILO ne "
-"radi\n"
-"na vaĆĄoj trenutnoj konfiguraciji. Vlastiti bootdisk se moĆŸe takođe koristiti "
-"sa\n"
-"Mandrake rescue image, pri čemu je mnogo lakơe ispraviti neke ozbiljne\n"
-"sistemske kvarove.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"Ako ĆŸelite napraviti boot disketu za vaĆĄ sistem, stavite neku disketu u "
-"vaĆĄu\n"
-"prvu jedinicu i pritisnite \"U redu\"."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
-#: ../../bootloader.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Ne moĆŸete instalirati bootloader na %s particiju\n"
+msgid "comma separated strings"
+msgstr "tekst razdvojen zarezima"
-#: ../../bootloader.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "not enough room in /boot"
-msgstr "nema dovoljno prostora u /boot"
+msgid "These are the machines from which the scanners should be used:"
+msgstr "Ovo su računari sa koji treba koristiti skenere:"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Osvjetljene stavke će biti bootane automatski za %d sekundi."
+msgid "Messages"
+msgstr "Poruke"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "opcija prije bootanja, ili 'c' za komandnu liniju."
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr "Nepoznat|CPH06X (bt878) [razni proizvođači]"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Pritisnite enter za bootanje izabranog OSa, 'e' za editovanje"
+msgid "POP and IMAP Server"
+msgstr "POP i IMAP server"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Koristite tipke %c i %c za izbor jedne od opcija."
+msgid "Mexico"
+msgstr "Meksiko"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Dobro doĆĄli u GRUB izbornik operativnog sistema!"
+msgid "Model stepping"
+msgstr "Model stepping"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Rwanda"
+msgstr "Ruanda"
-#: ../../bootloader.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Grub"
-msgstr "Grub"
+msgid "Do you have any %s interfaces?"
+msgstr "Imate li ijedan %s interfejs?"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with text menu"
-msgstr "LILO sa tekstualnim menijem"
+msgid "Switzerland"
+msgstr "Ć vicarska"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO sa grafičkim menijem"
+msgid "Brunei Darussalam"
+msgstr "Bruneji"
-#: ../../bootloader.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Remote lpd Printer Options"
+msgstr "Opcije udaljenog lpd ơtampača"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
"\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
msgstr ""
-"Dobro doĆĄli u %s izbornik operativnog sistema!\n"
+"GNU/Linux je viĆĄekorisnički sistem, ĆĄto znači da svaki korisnik moĆŸe imati\n"
+"vlastite preference, vlastite datoteke i tako dalje. MoĆŸete pročitati "
+"''Početnički\n"
+"vodič'' da biste saznali viơe o viơekorisničkim sistemima. Ali za razliku "
+"od\n"
+"\"root\"-a, koji je administrator sistema, korisnicima koje dodate u ovom "
+"trenutku\n"
+"neće biti dozvoljeno da promijene niơta osim vlastitih datoteka i vlastite\n"
+"konfiguracije, čime je sistem zaơtićen od nenamjernih ili zlonamjernih "
+"izmjena\n"
+"koje mogu uticati na cijeli sistem. Moraćete kreirati najmanje jednog "
+"korisnika\n"
+"za vas same -- ovo je račun koji trebate koristiti za rutinsku, svakodnevnu\n"
+"upotrebu. Iako je vrlo lako prijaviti se kao \"root\" da biste radili sve i "
+"svaĆĄta,\"to takođe moĆŸe biti i vrlo opasno! Jedna greĆĄka moĆŸe značiti da vaĆĄ "
+"sistem\n"
+"viơe ne radi. Ako napravite ozbiljnu pogreơku kao običan korisnik, najgore\n"
+"ĆĄto se moĆŸe desiti jeste da izgubite neke informacije, ali ne i da utičete "
+"na\n"
+"cijeli sistem.\n"
"\n"
-"Izaberite operativni sistem na listi gore ili\n"
-"sačekajte %d sekundi do pokretanja podrazumjevanog OSa.\n"
+"U prvom polju unosite vaĆĄe pravo ime i prezime. Naravno, ovo nije obavezno\n"
+"-- u stvari moĆŸete ovdje unijeti ĆĄta god hoćete. DrakX će koristiti prvu "
+"riječ\n"
+"koju unesete i kopirati je u polje \"Korisničko ime\", ơto je ime koje će "
+"ovaj\n"
+"korisnik unositi da bi uĆĄao na sistem. Ako ĆŸelite, moĆŸete promijeniti "
+"ponuđenu\n"
+"vrijednost. Idući korak je da unesete ơifru. Sa sigurnosne tačke glediơta, "
+"ĆĄifra\n"
+"neprivilegovanog (običnog) korisnika nije tako vaĆŸna kao \"root\" ĆĄifra, "
+"ali\n"
+"to nije razlog da je zanemarite tako ơto ćete je ostaviti praznom ili\n"
+"prejednostavnom: na kraju krajeva, vaơe lične datoteke je ono ơto je u\n"
+"riziku.\n"
"\n"
+"Jednom kada kliknete na \"Prihvati korisnika\", moĆŸete ih dodati joĆĄ. "
+"Dodajte\n"
+"po jednog korisnika za svakog od vaĆĄih prijatelja: na primjer za vaĆĄeg oca\n"
+"ili sestru. Kliknite na \"Dalje ->\" kada zavrĆĄite dodavanje korisnika.\n"
+"\n"
+"Klikanjem na dugme \"Napredno\" moĆŸete promijeniti osnovni \"shell\" za tog\n"
+"korisnika (ponuđen je bash).\n"
+"\n"
+"Kada zavrơite dodavanje svih korisnika, bićete upitani da odaberete "
+"korisnika\n"
+"koji se moĆŸe automatski prijaviti prilikom pokretanja sistema. Ako ste "
+"zainteresovani\n"
+"za ovu mogućnost (i ne brinete previơe o lokalnoj sigurnosti), izaberite "
+"ĆŸeljenog\n"
+"korisnika i window manager, zatim kliknite na \"Dalje ->\". Ako niste "
+"zainteresovani\n"
+"za to, isključite opciju \"Ćœelite li koristiti ovu mogućnost?\"."
-#: ../../common.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "consolehelper missing"
-msgstr "nedostaje consolehelper"
+msgid "Configure Internet Access..."
+msgstr "Podesi Internet pristup..."
-#: ../../common.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "kdesu missing"
-msgstr "nedostaje kdesu"
+msgid "Norway"
+msgstr "NorveĆĄka"
-#: ../../common.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Snimanje ekrana će biti dostupno nakon ơto instalirate u %s"
+msgid "Danish"
+msgstr "Danska"
-#: ../../common.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "Ne mogu napraviti snimak ekrana prije particioniranja"
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
+msgstr ""
+"Automatski uključuje numlock pod konzolom i grafičkim okruĆŸenjem\n"
+"prilikom boota."
-#: ../../common.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "%d seconds"
-msgstr "%d sekundi"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+"Molimo unesite IP konfiguraciju za ovaj računar.\n"
+"Svaka stavka bi trebala biti unesena kao IP adresa u decimalnoj notaciji\n"
+"razdvojenoj tačkama (npr. 1.2.3.4)."
-#: ../../common.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "1 minute"
-msgstr "1 minuta"
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
+msgstr ""
+"Mandrake Linux instalacija se prostire na nekoliko CDova. DrakX zna da li "
+"je\n"
+"neki paket smjeơten na drugom CDu i on će izbaciti trenutni CD i zamoliti "
+"vas\n"
+"da ubacite neki drugi po potrebi."
-#: ../../common.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "%d minutes"
-msgstr "%d minuta"
+msgid "Processors"
+msgstr "Procesori"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "TB"
-msgstr "TB"
+msgid "Bulgaria"
+msgstr "Bugarska"
-#: ../../common.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "GB"
-msgstr "GB"
+msgid "No NIC selected!"
+msgstr "Nije izabran nijedan NIC!"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "MB"
-msgstr "MB"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr "Svalbard and Jan Mayen ostrva"
-#: ../../common.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "KB"
-msgstr "KB"
+msgid ""
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
+msgstr ""
+"DoĆĄlo je do problema prilikom podeĆĄavanja.\n"
+"Provjerite vaơu konekciju pomoću net_monitor ili mcc. Ako vaơa konekcija ne "
+"radi, moĆŸete ponovo pokrenuti podeĆĄavanje"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "United States"
-msgstr "SAD"
+msgid "partition %s is now known as %s"
+msgstr "particija %s je od sada poznata kao %s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Austria"
-msgstr "Austrija"
+msgid "Backup Other files..."
+msgstr "Backup-uj ostale datoteke..."
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Italy"
-msgstr "Italija"
+msgid "SMB server IP"
+msgstr "SMB server IP"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Netherlands"
-msgstr "Nizozemska"
+msgid "Congo (Kinshasa)"
+msgstr "Kongo (Kinshasa)"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sweden"
-msgstr "Ć vedska"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "Tabela particija za uređaj %s će biti zapisana na disk!"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Norway"
-msgstr "NorveĆĄka"
+msgid "Installing HPOJ package..."
+msgstr "Instaliram HPOJ pakete..."
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Greece"
-msgstr "Grčka"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr ""
+"Vlastita boot disketa vam omogućuje da pokrenete Linux pri čemu ne ovisite\n"
+"od bootloader programa. Ovo je korisno ako ne ĆŸelite instalirati LILO (ili "
+"grub) na\n"
+"vaĆĄ sistem, ako neki drugi operativni sistem uklanja LILO ili ako LILO ne "
+"radi\n"
+"na vaĆĄoj trenutnoj konfiguraciji. Vlastiti bootdisk se moĆŸe takođe koristiti "
+"sa\n"
+"Mandrake rescue image, pri čemu je mnogo lakơe ispraviti neke ozbiljne\n"
+"sistemske kvarove. Ćœelite li napraviti boot disketu za vaĆĄ sistem?\n"
+"%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Germany"
-msgstr "Njemačka"
+msgid ", USB printer \\#%s"
+msgstr ", USB ơtampač \\#%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Czech Republic"
-msgstr "Čeơka"
+msgid "Latvian"
+msgstr "Latvijska"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belgium"
-msgstr "Belgija"
+msgid "monthly"
+msgstr "mjesečno"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "France"
-msgstr "Francuska"
+msgid "Module name"
+msgstr "Naziv modula"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Costa Rica"
-msgstr "Kostarika"
+msgid "Start at boot"
+msgstr "Pokreni na bootu"
-#: ../../fsedit.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental Backups"
+msgstr "Koristi inkrementalni backup (nemoj prebrisati stare backupe)"
+
+#: ../../any.pm:1
#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "GreĆĄka u otvaranju %s za pisanje: %s"
+msgid "First sector of drive (MBR)"
+msgstr "Prvi sektor diska (MBR)"
-#: ../../fsedit.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Nothing to do"
-msgstr "Nemam ĆĄta da radim"
+msgid "Joystick"
+msgstr "Joystick"
-#: ../../fsedit.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Nema dovoljno prostora za auto-alokaciju"
+msgid "El Salvador"
+msgstr "El Salvador"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Ne moĆŸete koristiti ĆĄifrovani datotečni sistem za tačku montiranja %s"
+msgid "Use Unicode by default"
+msgstr "Podrazumijeva se Unicode"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-"Potreban vam je pravi file sistem (ext2/ext3, reiserfs, xfs ili jfs) za ovu "
-"tačku montiranja\n"
+msgid "the module of the GNU/Linux kernel that handles the device"
+msgstr "modul Linux kernela koji upravlja uređajem"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Ovaj direktorij treba ostati unutar korijenskog file sistema"
+msgid "Trying to rescue partition table"
+msgstr "PokuĆĄavam da spasim tabelu particija"
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Ne moĆŸete koristiti LVM logički volumen za tačku montiranja %s"
+msgid "Option %s must be an integer number!"
+msgstr "Opcija %s mora biti cijeli broj!"
-#: ../../fsedit.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
+"Entries you'll have to fill:\n"
+"%s"
msgstr ""
-"Izabrali ste softversku RAID particiju kao root (/).\n"
-"Nijedan bootloader nije u mogućnosti da rukuje sa ovim bez /boot particije.\n"
-"Molim kasnije dodajte /boot particiju"
+"Stavke koje morate popuniti:\n"
+"%s"
-#: ../../fsedit.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Već postoji particija sa tačkom montiranja %s\n"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "Ne mogu da pokrenem live upgrade !!!\n"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "Tačka montiranja se treba sastojati samo od brojeva i slova"
+msgid "Name: "
+msgstr "Ime: "
-#: ../../fsedit.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Tačke montiranja moraju počinjati sa /"
+msgid "16 million colors (24 bits)"
+msgstr "16 miliona boja (24 bita)"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Ne moĆŸete koristiti ReiserFS za particije manje od 32MB"
+msgid "Allow all users"
+msgstr "Dozvoli svim korisnicima"
-#: ../../fsedit.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Ne moĆŸete koristiti JFS za particije manje od 16MB"
+msgid "The official MandrakeSoft Store"
+msgstr "Oficijelna MandrakeSoft prodavnica"
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Resizing"
+msgstr "Mijenjam veličinu"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Cable connection"
+msgstr "Kablovska konekcija"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "User"
+msgstr "Korisnik"
#: ../../fsedit.pm:1
#, c-format
@@ -986,1342 +1836,259 @@ msgstr ""
"\n"
"SlaĆŸete li se sa gubitkom svih particija?\n"
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Error"
-msgstr "GreĆĄka"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr "Izvrơi novi backup prije vraćanja (samo za inkrementalni backup.)"
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "server"
-msgstr "server"
+msgid "Printer on parallel port \\#%s"
+msgstr "Ơtampač na paralelnom portu \\#%s"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "with /usr"
-msgstr "sa /usr"
+msgid "Name"
+msgstr "Ime"
-#: ../../fsedit.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "simple"
-msgstr "jednostavno"
+msgid "mkraid failed"
+msgstr "mkraid nije uspio"
-#: ../../fs.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Enabling swap partition %s"
-msgstr "Uključujem swap particiju %s"
+msgid "Button 3 Emulation"
+msgstr "Emulacija 3 dugmeta"
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "error unmounting %s: %s"
-msgstr "greĆĄka u demontiranju %s: %s"
+msgid "Sending files..."
+msgstr "Ć aljem datoteke..."
-#: ../../fs.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "montiranje particije %s u direktoriju %s nije uspjelo"
+msgid "Israeli (Phonetic)"
+msgstr "Izraelska (fonetska)"
-#: ../../fs.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mounting partition %s"
-msgstr "Montiram particiju %s"
+msgid "access to rpm tools"
+msgstr "pristup rpm alatima"
-#: ../../fs.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Checking %s"
-msgstr "Provjeravam %s"
+msgid "edit"
+msgstr "izmijeni"
-#: ../../fs.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatiram particiju %s"
+msgid "You must choose/enter a printer/device!"
+msgstr "Morate izabrati ili unijeti ơtampač / uređaj!"
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Kreiram i formatiram datoteku %s"
+msgid "Permission problem accessing CD."
+msgstr "Problem sa privilegijama tokom pristupa na CD."
-#: ../../fs.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Ne znam kako formatirati %s kao tip %s"
+msgid "Phone number"
+msgstr "Broj telefona"
-#: ../../fs.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatiranje %s nije uspjelo"
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr "Greơka: Drajver \"%s\" za vaơu zvučnu karticu nije na listi"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Kliknite na \"Dalje ->\" ako ĆŸelite obrisati sve podatke i particije koje\n"
-"su prisutne na ovom hard disku. Budite oprezni, jer nakon klikanja na\n"
-"\"Dalje ->\" nećete moći vratiti podatke i particije koji se trenutno "
-"nalaze\n"
-"na ovom hard disku, uključujući i sve Windows podatke.\n"
-"\n"
-"Kliknite na \"<- Nazad\" da obustavite ovu operaciju bez gubitka\n"
-"podataka i particija na ovom hard disku."
+msgid "Printer name, description, location"
+msgstr "Naziv ơtampača, opis, lokacija"
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Izaberite hard disk koji ĆŸelite obrisati kako biste instalirali vaĆĄu novu "
-"Mandrake\n"
-"Linux particiju. Budite paĆŸljivi, svi podaci koji se nalaze na njemu će "
-"biti\n"
-"izgubljeni i neće se moći vratiti!"
+msgid "USA (broadcast)"
+msgstr "USA (broadcast)"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
+"Please choose the\n"
+"media for backup."
msgstr ""
-"\"DrakX će vam pruĆŸiti saĆŸetak raznih informacija koje su prikupljene\n"
-"o vaĆĄem sistemu. Ovisno o instaliranom hardveru, vjerovatno imate\n"
-"neke ili sve od navedenih stavki. Pojedinačna stavka se sastoji od\n"
-"onoga ĆĄto je potrebno podesiti, nakon čega slijedi kraći saĆŸetak trenutne\n"
-"konfiguracije. Da biste ovo izmijenili, kliknite na odgovarajuće dugme "
-"\"Podesi\".\n"
-"\n"
-"* \"Tastatura\": provjerite trenutno mapu tastature i izmijenite je ako je\n"
-"potrebno.\n"
-"\n"
-"* \"DrĆŸava\": provjerite trenutno izabranu drĆŸavu. Ako se nalazite negdje\n"
-"drugo, kliknite na dugme \"Podesi\" i izaberite neku drugu. Ako se vaĆĄa\n"
-"zemlja ne nalazi na prikazanoj listi, kliknite na dugme \"ViĆĄe\" da biste\n"
-"dobili cjelokupnu listu zemalja.\n"
-"\n"
-"* \"Vremenska zona\": DrakX automatski određuje vaơu vremensku zonu\n"
-"na osnovu drĆŸave koju ste izabrali. MoĆŸete kliknuti na dugme \"Podesi\"\n"
-"ako ovo nije ispravno.\n"
-"\n"
-"* \"MiĆĄ\": provjerite trenutnu konfiguraciju miĆĄa i klinire na dugme da je\n"
-"promijenite ako je to potrebno.\"\n"
-"\n"
-"* \"Ơtampač\": klikanjem na dugme \"Podesi\" otvoriće se čarobnjak za\n"
-"podeơavanje ơtampača. Pogledajte odgovarajuće poglavlje ''Vodiča za\n"
-"početnike'' za viơe informacija o podeơavanju novog ơtampača. Interfejs\n"
-"koji je tamo prikazan je sličan onom koji će biti koriơten tokom "
-"instalacije.\n"
-"\n"
-"* \"Zvučna kartica\": ako je na vaơem sistemu otkrivena zvučna kartica, ona "
-"će\n"
-"biti prikazana ovdje. Ako primjetite da prikazana zvučna kartica nije ona\n"
-"koja je ustvari dio vaĆĄeg sistema, moĆŸete kliknuti na dugme i odabrati neki\n"
-"drugi drajver.\n"
-"\n"
-"* \"Grafički interfejs\": DrakX će podesiti vaơ grafički interfejs za rad "
-"na\n"
-"rezoluciji \"800x600\" ili \"1024x768\". Ako vam to ne odgovara, kliknite\n"
-"na dugme \"Podesi\" kako biste drugačije podesili vaơ interfejs.\n"
-"\n"
-"* \"TV kartica\": ako je na vaơem sistemu prepoznata TV kartica, biće\n"
-"prikazana ovdje. Ako imate TV karticu koja nije prepoznata, kliknite na\n"
-"dugme \"Podesi\" kako biste pokuơali podesiti je ručno.\n"
-"\n"
-"* \"ISDN kartica\": ako je na vaĆĄem sistemu otkrivena ISDN kartica, ona\n"
-"će biti prikazana ovdje. MoĆŸete kliknuti na dugme \"Podesi\" da promijenite\n"
-"parametre vezane za nju.\n"
-"\n"
-"* \"MreĆŸa\": ako ĆŸelite, moĆŸete podesiti vaĆĄ Internet pristup ili pristup\n"
-"lokalnoj mreĆŸi.\n"
-"\n"
-"* \"Nivo sigurnosti\": ovdje moĆŸete promijeniti nivo sigurnosti sistema "
-"koji\n"
-"je podeĆĄen ranije.\n"
-"\n"
-"* \"Firewall\": ako planirate povezati vaơ računar na Internet, pametno je\n"
-"zaơtititi ga od upada postavljanjem firewalla. Pogledajte odgovarajuće\n"
-"poglavlje ''Vodiča za početnike'' za detalje o podeơavanju firewalla.\n"
-"\n"
-"* \"Bootloader\": ako ĆŸelite promijeniti postavke bootloadera, kliknite na "
-"to\n"
-"dugme. Ovo bi trebalo biti rezervisano za napredne korisnike.\n"
-"\n"
-"* \"Servisi\": ovdje moĆŸete fino podeĆĄavati koji servisi će biti pokrenuti "
-"na\n"
-"vaơem računaru. Ako planirate koristiti ovaj računar kao server, dobra je\n"
-"ideja joĆĄ jednom pregledati ove postavke."
+"Molim izaberite medij\n"
+"za backup."
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
-msgstr ""
-"\"Zvučna kartica\": ako je na vaơem sistemu otkrivena zvučna kartica, ona "
-"će\n"
-"biti prikazana ovdje. Ako primjetite da prikazana zvučna kartica nije ona\n"
-"koja je ustvari dio vaĆĄeg sistema, moĆŸete kliknuti na dugme i odabrati neki\n"
-"drugi drajver."
+msgid "Use Xinerama extension"
+msgstr "Koristi Xinerama ekstenziju"
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
+msgid "Loopback"
+msgstr "Loopback"
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
msgstr ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"DrakX će najprije potraĆŸiti sve IDE uređaje prisutne na vaĆĄem računaru. "
-"Također\n"
-"će pretraĆŸiti sistem za jednu ili viĆĄe PCI SCSI kartica. Ako SCSI kartica "
-"bude\n"
-"pronađena, DrakX će automatski instalirati odgovarajući drajver.\n"
-"\n"
-"Budući da pronalaĆŸenje hardware-a nikad nije savrĆĄeno, DrakX moĆŸda neće\n"
-"pronaći vaơe hard diskove. Ako se to desi, moraćete ih navesti ručno.\n"
-"\n"
-"Ako je potrebno da ručno odaberete PCI SCSI adapter, DrakX će vas pitati\n"
-"da li ĆŸelite navesti neke opcije za njega. Trebate dopustiti DrakXu da "
-"ispita\n"
-"hardware za neke opcije specifične za tu karticu. Ovo obično radi dobro.\n"
-"\n"
-"Ako DrakX ne moĆŸe ispitati opcije koje trebaju biti proslijeđene, moraćete\n"
-"ručno navesti opcije za drajver."
+msgid "West Europe"
+msgstr "Zapadna Evropa"
-#: ../../help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
msgstr ""
-"Sada je vrijeme da izaberete sistem ơtampe za vaơ računar. Drugi OSi\n"
-"vam moĆŸda nude jedan, ali Mandrake Linux nudi dva. Svaki od ovih sistema\n"
-"je najbolji za određenu vrstu konfiguracije.\n"
-"\n"
-"* \"pdq\" -- skraćeno za ''ơtampaj i nemoj stavljati u red'' (print, don't "
-"queue) je\n"
-"najbolji izbor ako imate direktnu vezu na ĆĄtampač, ĆŸelite izlaz za paniku u\n"
-"slučajevima zaglavljivanja papira i nemate mreĆŸne ĆĄtampače. (\"pdq\" moĆŸe\n"
-"rijeĆĄiti samo vrlo jednostavne mreĆŸne slučajeve i pomalo je spor kada se "
-"koristi\n"
-"sa mreĆŸama.) Preporučujemo da koristite \"pdq\" ako je ovo vaĆĄe prvo "
-"iskustvo\n"
-"sa GNU/Linuxom.\n"
-"\n"
-"* \"CUPS\" - ''Common Unix Printing System'' (uobičajeni UNIX sistem "
-"ĆĄtampe)\n"
-"je odličan izbor za ơtampanje na ơtampač koji se nalazi lokalno ili s druge "
-"strane\n"
-"planete. Vrlo ga je jednostavno podesiti i moĆŸe sluĆŸiti kao server ili "
-"klijent za\n"
-"prastari \"lpd\" sistem ĆĄtampe, tako da je kompatibilan sa starijim "
-"operativnim\n"
-"sistemima kojima moĆŸda joĆĄ trebaju usluge ĆĄtampanja. Mada je vrlo moćan,\n"
-"osnovno podeĆĄavanje je skoro jednako lagano kao za \"pdq\". Ako ĆŸelite\n"
-"simulirati \"lpd\" server, provjerite da li ste pokrenuli \"cups-lpd\" "
-"servis.\n"
-"\"CUPS\" uključuje grafičke alate za ơtampanje ili izbor opcija ơtampača,\n"
-"te za upravljanje ơtampačem.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
-"Ako sada napravite izbor, pa kasnije zaključite da vam se ne sviđa izabrani\n"
-"sistem ĆĄtampe, moĆŸete ga promijeniti pokretanjem PrinterDrake iz Mandrake\n"
-"Kontrolnog centra i klikanjem na dugme Ekspert."
+"OPCIJE:\n"
+" --help - ispisuje ovu pomoć.\n"
+" --report - program treba biti neki od mandrake alata\n"
+" --incident - program treba biti neki od mandrake alata"
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
-msgstr ""
-"LILO i grub su Linux bootloader-i. Ova faza je obično automatizovana.\n"
-"DrakX će analizirati boot sektor diska i postupati u skladu s onim ơto\n"
-"zatekne tamo:\n"
-"\n"
-" * ako pronađe Windows boot sektor, biće zamijenjen sa grub/LILO boot\n"
-"sektorom. Na ovaj način bićete u mogućnosti da učitate ili GNU/Linux ili\n"
-"neki drugi OS.\n"
-"\n"
-" * ako pronađe grub ili LILO boot sektor, zamijeniće ga novim.\n"
-"\n"
-"Ako ne moĆŸe donijeti odluku, DrakX će vas pitati gdje da postavi\n"
-"bootloader.\n"
-"\n"
-"\"Boot uređaj\": u većini slučajeva, ne trebate mijenjati ponuđeno\n"
-"(\"Prvi sektor diska (MBR)\"), ali ako odlučite, moĆŸete instalirati "
-"bootloader\n"
-"na drugi hard disk (\"/dev/hdb\") ili čak na disketu (\"Na disketi\")."
+msgid "Harddrake2 version %s"
+msgstr "Harddrake2 verzija %s"
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-"Nakon ơto podesite opơte parametre bootloadera, dobićete listu opcija\n"
-"koja će biti prikazana prilikom svakog boot-a.\n"
-"\n"
-"Ako na vaơem računaru postoje neki drugi operativni sistemi, oni će biti\n"
-"dodani na tu listu. MoĆŸete fino podesiti postojeće opcije klikajući na "
-"dugme\n"
-"\"Dodaj\" da biste dodali novu opciju; izborom postojeće opcije i klikanjem\n"
-"na \"Izmijeni\" ili \"Ukloni\" da biste je izmijenili ili uklonili. \"U redu"
-"\" potvrđuje\n"
-"vaĆĄe izmjene.\n"
-"\n"
-"Takođe moĆŸda ne ĆŸelite dati pristup na ove druge operativne sisteme bilo "
-"kome\n"
-"ko sjedne za računar i restartuje ga. MoĆŸete obrisati pojedine stavke iz "
-"boot\n"
-"menija, ali odgovarajuće operativne sisteme viơe nećete moći pokrenuti bez\n"
-"boot diskete!"
+msgid "Copying %s"
+msgstr "Kopiram %s"
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
-msgstr ""
-"Ovaj dijalog vam omogućuje da fino podesite vaơ bootloader:\n"
-"\n"
-" * \"Koristi bootloader\": ovdje su tri izbora za vaĆĄ bootloader:\n"
-"\n"
-" * \"GRUB\": ako preferirate grub (tekstualni meni),\n"
-"\n"
-" * \"LILO sa tekstualnim menijem\": ako preferirate LILO sa\n"
-"njegovim tekstualnim interfejsom.\n"
-"\n"
-" * \"LILO sa grafičkim menijem\": ako preferirate LILO sa njegovim\n"
-"grafičkim interfejsom.\n"
-"\n"
-" * \"Boot uređaj\": u većini slučajeva nije potrebno da mijenjate\n"
-"ponuđenu vrijednost (\"/dev/hda\"), ali ako to ĆŸelite, bootloader\n"
-"moĆŸe biti instaliran na drugi hard disk (\"/dev/hdb\") ili čak na\n"
-"disketu (\"/dev/fd0\");\n"
-"\n"
-" * \"Pauza prije bootanja default image-a\": nakon boota ili reboota\n"
-"računara, ovo je vrijeme koje je dato korisniku za računarom da izabere\n"
-"neku opciju iz boot menija koja se razlikuje od izabrane.\n"
-"\n"
-"!! Pazite da ako odaberete da ne ĆŸelite instalirati bootloader (klikanjem\n"
-"na \"Preskoči\"), morate se pobrinuti da imate neki način za pokretanje\n"
-"vaơeg Mandrake Linux sistema! Budite sigurni da znate ơta hoćete prije\n"
-"nego ĆĄto promijenite neku od ovih opcija. !!\n"
-"\n"
-"Klik na dugme \"Napredno\" u ovom dijalogu vam pruĆŸa napredne opcije\n"
-"rezervisane za ekspertnog korisnika."
+msgid "Choose color"
+msgstr "Izaberite boju"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
-msgstr ""
-"Ovo je najvaĆŸnija odluka za sigurnost vaĆĄeg GNU/Linux sistema: trebate\n"
-"unijeti \"root\" ĆĄifru, \"Root\" je sistemski administrator i jedini "
-"korisnik kojem\n"
-"je dozvoljeno da updatuje sistem, dodaje druge korisnike, mijenja "
-"konfiguraciju\n"
-"sistema itd. Ukratko, \"root\" moĆŸe raditi sve! Stoga trebate izabrati ĆĄifru "
-"koju\n"
-"je teơko pogoditi - DrakX će vam reći da li je ơifra koju ste odabrali "
-"prelagana.\n"
-"Kao ĆĄto moĆŸete vidjeti, niste prisiljeni da unesete ĆĄifru, ali vam "
-"savjetujemo da\n"
-"to uradite. GNU/Linux je podloĆŸan operatorskim greĆĄkama kao i bilo koji "
-"drugi\n"
-"operativni sistem. PoĆĄto \"root\" moĆŸe prevazići sva ograničenja i "
-"nenamjerno\n"
-"pobrisati sve podatke na particijama neoprezno im pristupajući, vaĆŸno je da "
-"je\n"
-"teĆĄko postati \"root\".\n"
-"\n"
-"Ơifra treba biti kombinacija alfanumeričkih znakova i biti barem 8 znakova "
-"duga.\n"
-"Nikad ne zapisujte \"root\" ĆĄifru -- time vaĆĄ sistem postaje lagano "
-"kompromitovati.\n"
-"\n"
-"Jedan izuzetak -- ne dozvolite da ĆĄifra bude preduga ili prekomplikovana "
-"poĆĄto\n"
-"ćete je morati zapamtiti!\n"
-"\n"
-"Ơifra neće biti prikazana na ekranu dok je unosite. Da bismo smanjili "
-"mogućnost\n"
-"greơke zbog kucanja naslijepo, moraćete unijeti ơifru dva puta. Ako nekim\n"
-"slučajem ponovite istu greơku dva puta, ovu ''neispravnu'' ơifru trebate "
-"koristiti\n"
-"prilikom prve prijave.\n"
-"\n"
-"Ako ĆŸelite da pristup ovom računaru bude kontroliran pomoću servera za\n"
-"autentikaciju, kliknite na dugme \"Napredno\".\n"
-"\n"
-"Ako vaĆĄa mreĆŸa koristi LDAP, NIS ili PDC Windows domen autentikacione\n"
-"servise, izaberite odgovarajući kao \"autentikaciju\". Ako ne znate koji\n"
-"koristiti, pitajte vaĆĄeg mreĆŸnog administratora.\n"
-"\n"
-"Ako imate problema sa pamćenjem ĆĄifara, moĆŸete izabrati opciju \"Bez\n"
-"ơifre\", pod uslovom da vaơ računar neće biti spojen na Internet i da\n"
-"vjerujete svakome ko mu ima fizički pristup."
+msgid "Dominican Republic"
+msgstr "Dominikanska Republika"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Molimo izaberite ispravan port. Na primjer, \"COM1\" port pod Windows\n"
-"operativnim sistemom, pod GNU/Linuxom se zove \"ttyS0\" ."
+msgid "Swaziland"
+msgstr "Svazilend"
-#: ../../help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
-msgstr ""
-"Obično DrakX nema problema da odredi broj dugmadi na vaơem miơu.\n"
-"Ako ima, pretpostaviće da imate miơ sa dva dugmeta i podesiće simulaciju\n"
-"trećeg dugmeta. Treće dugme se moĆŸe ''pritisnuti'' na miĆĄu sa dva dugmeta\n"
-"istovremenim klikom na lijevo i desno dugme miơa. DrakX će automatski\n"
-"znati da li miĆĄ koristi PS/2, serijski ili USB interfejs.\n"
-"\n"
-"Ako iz nekog razloga ĆŸelite navesti drugačiji tip miĆĄa, izaberite ga sa\n"
-"ponuđene liste.\n"
-"\n"
-"Ako izaberete miơ različit od ponuđenog, biće prikazan testni ekran.\n"
-"Koristite miơ i točkić da potvrdite da su postavke tačne i da miơ radi "
-"ispravno.\n"
-"Ako miĆĄ ne radi kako treba, pritisnite tipku space ili Enter da prekinete "
-"test\n"
-"i vratite se na listu izbora.\n"
-"\n"
-"Miơevi sa točkićem često nisu prepoznati automatski, stoga trebate izabrati\n"
-"miơ na listi. Pazite da izaberete odgovarajući port na koji je vaơ miơ "
-"priključen.\n"
-"Nakon izbora miơa i pritiska na dugme \"Dalje ->\", na ekranu će biti "
-"prikazana\n"
-"slika miơra. Pomjerajte točkić miơa kako biste provjerili da li ispravno "
-"funkcioniĆĄe.\n"
-"Kada vidite da se točkić na ekranu pomjera onako kako vi vrtite stvarni "
-"točkić,\n"
-"provjerite dugmad i provjerite da li se pokazivač na ekranu pomjera onako "
-"kako\n"
-"vi pomjerate miĆĄ."
+msgid "Set-UID"
+msgstr "Set-UID"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
-msgstr ""
-"Vaơ izbor preferiranog jezika će se odraziti na jezik dokumentacije,\n"
-"instalacione procedure i generalno sistema. Najprije izaberite oblast u\n"
-"kojoj se nalazite, a zatim jezik kojim govorite.\n"
-"\n"
-"Klikanjem na dugme \"Napredno\" moĆŸete izabrati druge jezike koje\n"
-"ĆŸelite instalirati na vaĆĄu radnu stanicu, time instalirajući sistemsku\n"
-"dokumentaciju i aplikacije za svaki od izabranih jezika. Na primjet, ako\n"
-"će vaơ računar koristiti osobe iz ơpanije, izaberite Engleski kao osnovni\n"
-"jezik na listi, a Ć panski u oblasti Napredno.\n"
-"\n"
-"Obratite paĆŸnju da niste ograničeni na samo jedan dodatni jezik. MoĆŸete\n"
-"ih izabrati nekoliko ili čak ih instalirati sve klikom na polje \"Svi jezici"
-"\".\n"
-"Vaơ izbor podrơke za neki jezik označava da će biti instaliran prijevod,\n"
-"fontovi, pravila za provjeru pravopisa itd. za taj jezik. Pored toga, "
-"opcija\n"
-"\"Koristi Unicode\" će prisiliti upotrebu Unicode-a (UTF-8) na cijelom\n"
-"sistemu. No, obratite paĆŸnju da je ovo eksperimentalna mogućnost. Ako\n"
-"izaberete nekoliko jezika koji zahtijevaju različito kodiranje, Unicode će\n"
-"svejedno biti instaliran.\n"
-"\n"
-"Da prebacujete između raznih jezika instaliranih na vaĆĄem sistemu, moĆŸete\n"
-"pokrenuti kao \"root\" naredbu \"/usr/sbin/localedrake\", čime mijenjate\n"
-"jezik koji koristi čitav sistem. Izvrơavanjem te naredbe kao običan "
-"korisnik\n"
-"mijenjate jezičke postavke samo za tog konkretnog korisnika."
+msgid "Please check if you are using CDRW media"
+msgstr "Molim uključite ako koristite CDRW medij"
#: ../../help.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
msgstr ""
-"Ovisno o osnovnom jeziku koji izaberete u Sekciji \"Jezik\", DrakX će\n"
-"automatski izabrati određeni tip tastature. Ipak, moĆŸda nemate tastaturu\n"
-"koja tačno odgovara vaơem jeziku: npr. ako ste Ơvajcarac koji govori\n"
-"engleski, moĆŸda imate ĆĄvajcarsku tastaturu. Ili ako govorite engleski ali\n"
-"se nalazite u Kvibeku, moĆŸda ćete se naći u situaciji gdje se vaĆĄ jezik i\n"
-"tastatura ne poklapaju. U svakom slučaju, ovaj korak instalacije vam\n"
-"omogućava da izaberete odgovarajuću tastaturu sa liste.\n"
-"\n"
-"Kliknite na dugme \"ViĆĄe\" kako bi vam bila predstavljena potpuna lista\n"
-"podrĆŸanih tastatura.\n"
-"\n"
-"Ako izaberete raspored tipaka koji je baziran na ne-latiničnoj abecedi,\n"
-"sljedeći dijalog će vam ponuditi da izaberete tipke pomoću kojih moĆŸete\n"
-"prebaciti tastaturu između latiničnog i ne-latiničnog rasporeda."
+"Izaberite hard disk koji ĆŸelite obrisati kako biste instalirali vaĆĄu novu "
+"Mandrake\n"
+"Linux particiju. Budite paĆŸljivi, svi podaci koji se nalaze na njemu će "
+"biti\n"
+"izgubljeni i neće se moći vratiti!"
-#: ../../help.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
-"Ovaj korak se aktivira samo ako je na vaơem računaru pronađena postojeća\n"
-"GNU/Linux particija.\n"
-"\n"
-"DrakX sada treba znati da li ĆŸelite izvrĆĄiti novu instalaciju ili "
-"nadogradnju postojećeg\n"
-"Mandrake Linux sistema:\n"
-"\n"
-" * \"Instaliraj\": Najčeơće ovo će u potpunosti obrisati stari sistem. Ako "
-"ĆŸelite\n"
-"promijeniti particioniranje starog hard diska ili promijeniti datotečni "
-"sistem,\n"
-"trebate koristiti ovu opciju. Ali, ovisno o vaĆĄoj ĆĄemi particioniranja, "
-"moĆŸete\n"
-"spriječiti da neki od vaơih postojećih podataka budu prepisani.\n"
-"\n"
-" * \"Nadogradi\": Ova vrsta instalacije vam omogućuje da updatujete pakete\n"
-"koji su trenutno instalirani na vaĆĄem Mandrake Linux sistemu. VaĆĄa trenutna\n"
-"ơema particioniranja i korisnički podaci neće biti izmijenjeni. Većina "
-"ostalih koraka\n"
-"konfiguracije ostaju kao ơto jesu, slično običnoj instalaciji.\n"
-"\n"
-"Opcija ''Nadogradi'' bi trebala raditi ispravno na Mandrake Linux sistemima "
-"koji\n"
-"koriste verziju \"8.1\" ili kasniju. Obavljanje nadogradnje na ranijim "
-"verzijama\n"
-"Mandrake Linuxa, prije verzije \"8.1\", nije preporučeno."
+msgid " on parallel port \\#%s"
+msgstr " na paralelnom portu \\#%s"
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
-"\"DrĆŸava\": provjerite trenutni izbor drĆŸave. Ako se ne nalazite ovdje,\n"
-"kliknite na dugme \"Podesi\" i izaberite neku drugu drĆŸavu. Ako se vaĆĄa\n"
-"zemlja ne nalazi na listi, kliknite na dugme \"ViĆĄe\" kako biste dobili "
-"listu\n"
-"svih drĆŸava."
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "Koristite tipke %c i %c za izbor jedne od opcija."
-#: ../../help.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Na vaĆĄem hard disku ustanovljeno je viĆĄe od jedne Microsoft particije.\n"
-"Molim izaberite onu koju ĆŸelite smanjiti kako biste instalirali vaĆĄ "
-"Mandrake\n"
-"Linux operativni sistem.\n"
-"\n"
-"Svaka particija je navedena ovako: \"Linux ime\", \"Windows ime\",\n"
-"\"Kapacitet\".\n"
-"\n"
-"\"Linux ime\" se sastoji od: \"vrste hard diska\", \"broja hard diska\",\n"
-"\"broja particije\" (na primjer, \"hda1\").\n"
-"\n"
-"\"Vrsta hard diska\" je \"hd\" ako je vaĆĄ hard disk IDE, a \"sd\" ako je\n"
-"u pitanju SCSI hard disk.\n"
-"\n"
-"\"Broj hard diska\" je uvijek slovo nakon \"hd\" ili \"sd\". Kod IDE hard\n"
-"diskova:\n"
-"\n"
-" * \"a\" znači \"master hard disk na primarnom IDE kontroleru\";\n"
-"\n"
-" * \"b\" znači \"slave hard disk na primarnom IDE kontroleru\";\n"
-"\n"
-" * \"c\" znači \"master hard disk na sekundarnom IDE kontroleru\";\n"
-"\n"
-" * \"d\" znači \"slave hard disk na sekundarnom IDE kontroleru\";\n"
-"\n"
-"Kod SCSI hard diskova, \"a\" je \"disk sa najniĆŸim SCSI IDom\", \"b\"\n"
-"je \"drugi najniĆŸi SCSI ID\", itd.\n"
-"\n"
-"\"Windows ime\" je slovo kojim je vaơ hard disk označen pod Windowsom\n"
-"(prva particija prvog diska se zove \"C:\")."
+msgid "Generic 2 Button Mouse"
+msgstr "OpĆĄti miĆĄ sa 2 dugmeta"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy.\n"
-"Useful for later partition-table recovery if necessary. It is strongly\n"
-"recommended to perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and load your "
-"initial\n"
-"partitions table.\n"
-"\n"
-" * \"removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(Type, options, format) and gives more information.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the chapter ext2fs from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
+#: ../../lvm.pm:1
+#, c-format
+msgid "Remove the logical volumes first\n"
+msgstr "Najprije ukloni logičke volumene\n"
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Na ovom mjestu, DrakX vam omogućuje da izaberete sigurnosni nivo\n"
-"koji ĆŸelite imati na ovom računaru. Kao pravilo, sigurnosni nivo treba biti\n"
-"tim viĆĄi ĆĄto su vaĆŸniji podaci na računaru, a pogotovo ako će računar biti\n"
-"direktno izloĆŸen Internetu. Većim nivoom sigurnosti obično gubite na\n"
-"jednostavnosti koriĆĄtenja.\n"
-"\n"
-"Ako ne znate ĆĄta izabrati, zadrĆŸite ponuđenu opciju."
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "Osvjetljene stavke će biti bootane automatski za %d sekundi."
-#: ../../help.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
msgstr ""
-"Prilikom instalacije Mandrake Linuxa, moguće je da su neki paketi\n"
-"aĆŸurirani od zadnjeg izdanja. Moguće je da su ispravljeni bugovi ili\n"
-"rjeĆĄena neka sigurnosna pitanja. Ako ĆŸelite iskoristiti ova unaprjeđenja,\n"
-"moĆŸete ih sada dobaviti sa Interneta. Izaberite \"Da\" ako imate ispravnu\n"
-"Internet vezu, ili \"Ne\" ako ćete radije instalirati aĆŸurirane pakete\n"
-"kasnije.\n"
-"\n"
-"Ako izaberete \"Da\" dobićete listu mjesta sa kojih se mogu skinuti\n"
-"novi paketi. Izaberite ono najbliĆŸe vama. Pojaviće se stablo za izbor\n"
-"paketa: pregledajte izabrano i pritisnite \"Instaliraj\" da dobavite i\n"
-"instalirate izabrane pakete, ili \"Odustani\" za prekid."
+"Ne mogu pisati u /etc/sysconfig/bootsplash\n"
+"Datoteka nije pronađena."
-#: ../../help.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet access"
+msgstr "Pristup Internetu"
+
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
+"y coordinate of text box\n"
+"in number of characters"
msgstr ""
-"Sve particije koje su upravo definisane moraju biti formatirane kako bi se\n"
-"mogle koristiti (formatiranje znači kreiranje datotečnog sistema). \n"
-"\n"
-"U ovom trenutku moĆŸda ćete poĆŸeljeti da reformatirate neke već postojeće\n"
-"particije kako biste pobrisali podatke koje sadrĆŸe. Ako ĆŸelite to učiniti, "
-"molim\n"
-"takođe izaberite i te particije.\n"
-"\n"
-"Molim obratite paĆŸnju da nije neophodno formatirati sve postojeće "
-"particije.\n"
-"Morate reformatirati particije koje sadrĆŸe operativni sistem (kao ĆĄto su\n"
-"\"/\", \"/usr\" ili \"var\") ali ne morate reformatirati particije koje "
-"sadrĆŸe\n"
-"podatke koje ĆŸelite zadrĆŸati (tipično /home).\n"
-"\n"
-"Molimo da paĆŸljivo izaberete particije. Nakon formatiranja, svi podaci na\n"
-"odabranim particijama će biti pobrisani i nećete biti u mogućnosti da ih\n"
-"povratite.\n"
-"\n"
-"Kliknite na \"Dalje ->\" kada budete spremni za formatiranje particija.\n"
-"\n"
-"Kliknite na \"<- Nazad\" ako ĆŸelite da izaberete druge particije za "
-"instalaciju\n"
-"vaĆĄeg novog Linux-Mandrake operativnog sistema.\n"
-"\n"
-"Kliknite na \"Napredno\" da izaberete particije koje ĆŸelite provjeriti radi\n"
-"loĆĄih blokova."
+"y koordinata tekst polja\n"
+"u broju znakova"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
msgstr ""
-"To je to. Instalacija je sada zavrĆĄena i vaĆĄ GNU/Linux sistem je spreman\n"
-"za upotrebu. Samo kliknite na \"Dalje ->\" da restartujete sistem. Prva "
-"stvar\n"
-"koju ćete ugledati nakon ơto računar zavrơi hardverske provjere je meni\n"
-"bootloadera, koji vam nudi izbor operativnog sistema koji ĆŸelite pokrenuti.\n"
-"\n"
-"Dugme \"Napredno\" će vam ponuditi joơ dva dugmeta za:\n"
-"\n"
-" * \"generisanje autoinstalacijske diskete\": da biste napravili "
-"instalacionu\n"
-"disketu koja će automatski izvrơiti cijelu instalaciju bez intervencije "
-"operatora,\n"
-"sličnu instalaciji koju ste upravo konfigurisali.\n"
-"\n"
-" Obratite paĆŸnju na dvije različite opcije koje su dostupne nakon "
-"klikanja\n"
-"na ovo dugme:\n"
-"\n"
-" * \"Ponovi\". Ovo je djelomično automatizirana instalacija. Korak\n"
-"particioniranja je jedini interaktivni dio.\n"
-"\n"
-" * \"Automatizirano\". Potpuno automatska instalacija: hard disk je\n"
-"potpuno prepisan, svi podaci su izgubljeni.\n"
-"\n"
-" Ova mogućnost je vrlo prikladna kada instalirate nekoliko sličnih\n"
-"računara. Pogledajte odjeljak Automatska instalacija na naơoj web stranici\n"
-"za viĆĄe informacija.\n"
-"\n"
-" * \"Snimi izbor paketa\" (*): snima listu paketa koje ste izabrali u ovoj\n"
-"instalaciji. Da biste upotrijebili ovaj izbor sa drugom instalacijom, "
-"ubacite\n"
-"disketu i započnite instalaciju. Na upitu, pritisnite tipku [F1] i ukucajte\n"
-">>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) Potrebna vam je FAT-formatirana disketa (da biste je napravili pod\n"
-"GNU/Linuxom, kucajte \"mformat a:\")"
+"Za listu opcija koje su dostupne za trenutni ơtampač kliknite na dugme "
+"\"Lista opcija za ĆĄtampu\"."
-#: ../../help.pm:1
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Enabling servers..."
+msgstr "Uključujem servere..."
+
+#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Printing test page(s)..."
+msgstr "Ć tampam testnu stranicu..."
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "There is already a partition with mount point %s\n"
+msgstr "Već postoji particija sa tačkom montiranja %s\n"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
"At this point, you need to decide where you want to install the Mandrake\n"
"Linux operating system on your hard drive. If your hard drive is empty or\n"
@@ -2339,51 +2106,49 @@ msgid ""
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
msgstr ""
"Na ovom mjestu trebate izabrati gdje ĆŸelite instalirati Mandrake Linux\n"
"operativni sistem na vaơem hard disku. Ako je disk prazan ili ako postojeći\n"
@@ -2460,242 +2225,140 @@ msgstr ""
"koriĆĄtenje DiskDrake alata moĆŸete naći u ``Vodiču za početnike'', odjeljak\n"
"``Upravljanje vaĆĄim particijama''."
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Konačno, bićete upitani da li ĆŸelite vidjeti grafički interfejs nakon "
-"pokretanja.\n"
-"Primjetite da vam je ovo pitanje postavljeno čak i ako izaberete da nećete\n"
-"testirati konfiguraciju. Očito, trebate odgovoriti \"Ne\" ako će vaơ "
-"računar\n"
-"imati ulogu servera ili ako imate problema sa podeĆĄavanjem ekrana."
+msgid "Ukraine"
+msgstr "Ukrajina"
-#: ../../help.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
-"U slučaju da postoji viơe servera za vaơu karticu, sa ili bez 3D\n"
-"ubrzanja, predloĆŸen vam je server koji najbolje odgovara vaĆĄim\n"
-"potrebama."
+msgid "Application:"
+msgstr "Aplikacija:"
-#: ../../help.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
-msgstr ""
-"Rezolucija\n"
-"\n"
-" MoĆŸete izabrati rezolucije i broj boja među vrijednostima koje su "
-"moguće\n"
-"na vaĆĄem hardveru. Izaberite one vrijednosti koje vam najbolje odgovaraju\n"
-"(moći ćete ih promijeniti nakon instalacije). Primjer izabrane konfiguracije "
-"je\n"
-"prikazan na monitoru."
+msgid "External ISDN modem"
+msgstr "Vanjski ISDN modem"
-#: ../../help.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
-msgstr ""
-"Monitor\n"
-"\n"
-" Instalacioni program obično moĆŸe prepoznati i podesiti monitor koji\n"
-"je povezan na vaĆĄ računar. Ako se ovo ne desi, moĆŸete odabrati neki\n"
-"monitor sa ove liste."
+msgid "if set to yes, report check result by mail."
+msgstr "ako je postavljeno na da, prijavljuje rezultate provjere mailom."
-#: ../../help.pm:1
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Your choice? (default %s) "
+msgstr "VaĆĄ izbor? (podrazumjevano %s)"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
+msgstr "Uklanjanje problema"
+
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid " / Region"
+msgstr "Reunion"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
+"The classic bug sound tester is to run the following commands:\n"
"\n"
-"Monitor\n"
"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
"\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
"\n"
-"Resolution\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+msgstr ""
+"Klasični način utvrđivanja bugova u zvučnom sistemu je izvrơavanje\n"
+"sljedećih naredbi:\n"
"\n"
"\n"
-"Test\n"
+"- \"lspcidrake -v | fgrep AUDIO\" će vam reći koji drajver koristi vaơa\n"
+"kartica inače\n"
"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+"- \"grep sound-slot /etc/modules.conf\" će vam reći koji drajver je\n"
+"trenutno u upotrebi\n"
"\n"
+"- sa \"/sbin/lsmod\" moĆŸete provjeriti da li je modul (drajver) učitan\n"
+"ili ne\n"
"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" vam\n"
+"govori da li su servisi sound i alsa podeơeni da se pokreću na\n"
+"initlevel 3\n"
"\n"
-"Options\n"
+"- \"aumix -q\" će vam reći da li je zvuk utiơan (muted) ili ne\n"
"\n"
-" You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
-msgstr ""
+"- \"/sbin/fuser -v /dev/dsp\" vam govori koji program koristi zvučnu "
+"karticu.\n"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
msgstr ""
-"Grafička kartica\n"
-"\n"
-" Instalacija sada moĆŸe normalno prepoznati i podesiti grafičku karticu\n"
-"koja je instalirana na vaĆĄem računaru. Ako se to ne desi, moĆŸete\n"
-"izabrati na ovoj listi karticu koju ustvari posjedujete.\n"
+"Testna stranica je poslana ơtampaču.\n"
+"MoĆŸe potrajati određeno vrijeme dok ĆĄtampač krene.\n"
+"Status ĆĄtampanja:\n"
+"%s\n"
"\n"
-" U slučaju da postoji viơe dostupnih servera za vaơu karticu, sa ili bez\n"
-"3D ubrzanja, biće vam predloĆŸen izbor servera koji najbolje odgovara\n"
-"vaĆĄim potrebama."
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
-msgstr ""
-"GNU/Linux koristi vrijeme u GMT (Greenwich Mean Time) obliku i prevodi ga\n"
-"u lokalno vrijeme u skladu sa vremenskom zonom koju ste izabrali. Ako je "
-"sat\n"
-"na vaĆĄoj matičnoj ploči podeĆĄen na lokalno vrijeme, moĆŸete isključiti ovu\n"
-"opciju isključujući \"Hardverski sat podeơen na GMT\", ơto će saopơtiti\n"
-"GNU/Linuxu da su sistemski sat i hardverski sat u istoj vremenskoj zoni.\n"
-"Ovo je korisno kada se na računaru takođe nalazi i drugi operativni sistem\n"
-"kao ĆĄto je Windows.\n"
-"\n"
-"Opcija \"Automatsko usklađivanje vremena\" će automatski regulisati sat\n"
-"spajajući se na udaljeni time server na Internetu. Kako bi ova mogućnost\n"
-"radila, morate imati ispravnu Internet konekciju. Najbolje je izabrati time "
-"server\n"
-"negdje u vaơoj blizini. Ova opcija će ustvari instalirati time server koji "
-"mogu\n"
-"koristiti i drugi računari u vaĆĄoj lokalnoj mreĆŸi."
+msgid "daily"
+msgstr "dnevno"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Ovim dijalogom moĆŸete izabrati koje servise ĆŸelite pokretati prilikom "
-"boota.\n"
-"\n"
-"Ovdje su predstavljeni svi servisi koji su dostupni u trenutnoj\n"
-"instalaciji. Pregledajte ih paĆŸljivo i isključite sve one koji nisu "
-"potrebni\n"
-"prilikom boota.\n"
-"\n"
-"Kada izaberete servis dobićete kratki tekst koji objaơnjava taj servis\n"
-"Ipak, ako niste sigurni da li je servis koristan ili ne, sigurnije je da ne\n"
-"mijenjate predloĆŸeni izbor.\n"
-"\n"
-"!! Budite vrlo paĆŸljivi sa ovim korakom ako namjeravate koristiti vaĆĄ "
-"računar\n"
-"kao server: vjerovatno ne ĆŸelite da pokrenete neke servise koji vam ne\n"
-"trebaju. Molimo vas da zapamtite da pojedini servisi mogu biti opasni\n"
-"ako su aktivni na serveru. Općenito, izaberite samo one servise koji vam\n"
-"stvarno trebaju. !!"
+msgid "and one unknown printer"
+msgstr "i jedan nepoznat ơtampač"
-#: ../../help.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
-"\"Ơtampač\": klikanjem na dugme \"Podesi\" otvorićete čarobnjak za\n"
-"podeơavanje ơtampača. Konsultujte odgovarajuće poglavlje \"Vodiča za\n"
-"početnike\" za viơe informacija o tome kako podesiti novi ơtampač. "
-"Interfejs\n"
-"koji je tamo prikazan je vrlo sličan onom koji se koristi prilikom "
-"instalacije."
+msgid "Ireland"
+msgstr "Irska"
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
+msgid "kernel version"
+msgstr "Kernel verzija"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid " Restore Configuration "
+msgstr " Vrati konfiguraciju "
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Is this the correct setting?"
+msgstr "Da li je ovo ispravno?"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
@@ -2733,4674 +2396,4358 @@ msgstr ""
"detalje o podeơavanju, ili jednostavno sačekajte da vaơ sistem bude\n"
"instaliran i koristite program koji je tamo opisan za podeĆĄavanje vaĆĄe veze."
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
-"Ako ste naveli da ĆŸelite individualno izabrati pakete, biće vam prikazano\n"
-"stablo koje sadrĆŸi sve pakete klasifikovane po grupama i podgrupama.\n"
-"Pregledajući stablo, moĆŸete izabrati čitave grupe, podgrupe ili "
-"individualne\n"
-"pakete.\n"
-"\n"
-"Kad god izaberete paket na stablu, desno od njega se pojavljuje opis koji\n"
-"vam objaĆĄnjava svrhu paketa.\n"
-"\n"
-"!! Ako izaberete neki serverski paket, zato ơto ste specifično izabrali taj\n"
-"paket ili zato ơto je on dio grupe paketa, bićete zamoljeni da potvrdite da\n"
-"zaista ĆŸelite da taj server bude instaliran. Mandrake Linux obično "
-"automatski\n"
-"pokreće sve instalirane servise prilikom pokretanja sistema. Čak i ako su\n"
-"sigurni i nemaju poznatih problema u trenutku pakovanja distribucije,\n"
-"sasvim je moguće da su neke sigurnosne rupe otkrivene nakon ơto je\n"
-"dovrơena ova verzija Mandrake Linuxa. Ako niste sigurni čemu tačno\n"
-"sluĆŸi taj paket ili zaĆĄto ga treba instalirati, kliknite na \"Ne\". Klikanje "
-"na\n"
-"\"Da\" će instalirati navedene servise i oni će biti automatski pokrenuti\n"
-"tokom pokretanja sistema. !!\n"
-"\n"
-"Opcija \"Automatske zavisnosti\" se koristi da bi se isključio dijalog "
-"upozorenja\n"
-"koji se pojavljuje svaki put kada instalacioni program automatski izabere\n"
-"neki paket kako bi razrijeĆĄio neku zavisnost. Pojedini paketi imaju "
-"zavisnost\n"
-"jedan od drugog u smislu da instalacija jednog paketa traĆŸi da bude "
-"instaliran\n"
-"i drugi. Instalacioni program moĆŸe odrediti koji paketi su potrebni da bi "
-"se\n"
-"zadovoljila zavisnost i uspjeĆĄno zavrĆĄila instalacija.\n"
-"\n"
-"Mala ikona sa disketom na dnu liste vam omogućuje da učitate listu paketa\n"
-"koja je napravljena tokom neke ranije instalacije. Ovo je korisno ako ĆŸelite "
-"da\n"
-"imate nekoliko računara koji su identično podeơeni. Nakon klika na ovu "
-"ikonu\n"
-"bićete zamoljeni da u disketnu jedinicu stavite disketu napravljenu tokom "
-"ranije\n"
-"instalacije. Pogledajte drugi savjet na zadnjem koraku da biste saznali kako "
-"se\n"
-"pravi ova disketa."
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\" Installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
-msgstr ""
-"Mandrake Linux instalacija se prostire na nekoliko CDova. DrakX zna da li "
-"je\n"
-"neki paket smjeơten na drugom CDu i on će izbaciti trenutni CD i zamoliti "
-"vas\n"
-"da ubacite neki drugi po potrebi."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Ovdje su navedene Linux particije koje već postoje na vaơem hard disku.\n"
-"MoĆŸete zadrĆŸati izbore koje je napravio čarobnjak, poĆĄto su oni dobri za\n"
-"najveći broj instalacija. Ako napravite neke izmjene, morate, ako niơta "
-"drugo,\n"
-"definisati root particiju (\"/\"). Nemojte izabrati premalu particiju ili "
-"nećete\n"
-"moći instalirati dovoljno softvera. Ako ĆŸelite drĆŸati vaĆĄe podatke na "
-"zasebnoj\n"
-"particiji, trebate takođe napraviti \"/home\" particiju (ơto je moguće samo "
-"ako\n"
-"imate viĆĄe od jedne Linux particije na raspolaganju).\n"
-"\n"
-"Svaka particija je navedena ovako: \"Ime\", \"Kapacitet\".\n"
-"\n"
-"\"Ime\" se sastoji od: \"vrsta hard diska\", \"broj hard diska\", \"broj\n"
-"particije\" (na primjer, \"hda1\").\n"
-"\n"
-"\n"
-"\"Vrsta hard diska\" je \"hd\" ako je vaĆĄ hard disk IDE, a \"sd\" ako je\n"
-"u pitanju SCSI hard disk.\n"
-"\n"
-"\"Broj hard diska\" je uvijek slovo nakon \"hd\" ili \"sd\". Kod IDE hard\n"
-"diskova:\n"
-"\n"
-" * \"a\" znači \"master hard disk na primarnom IDE kontroleru\";\n"
-"\n"
-" * \"b\" znači \"slave hard disk na primarnom IDE kontroleru\";\n"
-"\n"
-" * \"c\" znači \"master hard disk na sekundarnom IDE kontroleru\";\n"
-"\n"
-" * \"d\" znači \"slave hard disk na sekundarnom IDE kontroleru\";\n"
-"\n"
-"Kod SCSI hard diskova, \"a\" je \"disk sa najniĆŸim SCSI IDom\", \"b\"\n"
-"je \"drugi najniĆŸi SCSI ID\", itd."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
-msgstr ""
-"GNU/Linux je viĆĄekorisnički sistem, ĆĄto znači da svaki korisnik moĆŸe imati\n"
-"vlastite preference, vlastite datoteke i tako dalje. MoĆŸete pročitati "
-"''Početnički\n"
-"vodič'' da biste saznali viơe o viơekorisničkim sistemima. Ali za razliku "
-"od\n"
-"\"root\"-a, koji je administrator sistema, korisnicima koje dodate u ovom "
-"trenutku\n"
-"neće biti dozvoljeno da promijene niơta osim vlastitih datoteka i vlastite\n"
-"konfiguracije, čime je sistem zaơtićen od nenamjernih ili zlonamjernih "
-"izmjena\n"
-"koje mogu uticati na cijeli sistem. Moraćete kreirati najmanje jednog "
-"korisnika\n"
-"za vas same -- ovo je račun koji trebate koristiti za rutinsku, svakodnevnu\n"
-"upotrebu. Iako je vrlo lako prijaviti se kao \"root\" da biste radili sve i "
-"svaĆĄta,\"to takođe moĆŸe biti i vrlo opasno! Jedna greĆĄka moĆŸe značiti da vaĆĄ "
-"sistem\n"
-"viơe ne radi. Ako napravite ozbiljnu pogreơku kao običan korisnik, najgore\n"
-"ĆĄto se moĆŸe desiti jeste da izgubite neke informacije, ali ne i da utičete "
-"na\n"
-"cijeli sistem.\n"
-"\n"
-"U prvom polju unosite vaĆĄe pravo ime i prezime. Naravno, ovo nije obavezno\n"
-"-- u stvari moĆŸete ovdje unijeti ĆĄta god hoćete. DrakX će koristiti prvu "
-"riječ\n"
-"koju unesete i kopirati je u polje \"Korisničko ime\", ơto je ime koje će "
-"ovaj\n"
-"korisnik unositi da bi uĆĄao na sistem. Ako ĆŸelite, moĆŸete promijeniti "
-"ponuđenu\n"
-"vrijednost. Idući korak je da unesete ơifru. Sa sigurnosne tačke glediơta, "
-"ĆĄifra\n"
-"neprivilegovanog (običnog) korisnika nije tako vaĆŸna kao \"root\" ĆĄifra, "
-"ali\n"
-"to nije razlog da je zanemarite tako ơto ćete je ostaviti praznom ili\n"
-"prejednostavnom: na kraju krajeva, vaơe lične datoteke je ono ơto je u\n"
-"riziku.\n"
-"\n"
-"Jednom kada kliknete na \"Prihvati korisnika\", moĆŸete ih dodati joĆĄ. "
-"Dodajte\n"
-"po jednog korisnika za svakog od vaĆĄih prijatelja: na primjer za vaĆĄeg oca\n"
-"ili sestru. Kliknite na \"Dalje ->\" kada zavrĆĄite dodavanje korisnika.\n"
-"\n"
-"Klikanjem na dugme \"Napredno\" moĆŸete promijeniti osnovni \"shell\" za tog\n"
-"korisnika (ponuđen je bash).\n"
-"\n"
-"Kada zavrơite dodavanje svih korisnika, bićete upitani da odaberete "
-"korisnika\n"
-"koji se moĆŸe automatski prijaviti prilikom pokretanja sistema. Ako ste "
-"zainteresovani\n"
-"za ovu mogućnost (i ne brinete previơe o lokalnoj sigurnosti), izaberite "
-"ĆŸeljenog\n"
-"korisnika i window manager, zatim kliknite na \"Dalje ->\". Ako niste "
-"zainteresovani\n"
-"za to, isključite opciju \"Ćœelite li koristiti ovu mogućnost?\"."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
-msgstr ""
-"Prije nego ĆĄto nastavimo, trebate paĆŸljivo pročitati uvjete licence. Ona\n"
-"pokriva cijelu Mandrake Linux distribuciju. Ako se slaĆŸete sa svim\n"
-"uvjetima u njoj, kliknite na dugme \"Prihvati\". Ako ne, samo ugasite\n"
-"vaơ računar."
-
-#: ../../install2.pm:1
-#, c-format
-msgid "You must also format %s"
-msgstr "Morate takođe formatirati i %s"
-
-#: ../../install2.pm:1
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Ne mogu pristupiti kernelskim modulima koji odgovaraju vaĆĄem kernelu "
-"(nedostaje datoteka %s), ơto obično znači da je vaơa boot disketa zastarjela "
-"u odnosu na instalacioni medij (napravite noviju boot disketu)"
-
-#: ../../install_any.pm:1
-#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Doơlo je do greơke - nije pronađen nijedan ispravan uređaj na kojem se mogu "
-"kreirati novi file sistemi. Molimo provjerite vaơ hardware i pronađite uzrok "
-"greĆĄke"
-
-#: ../../install_any.pm:1 ../../partition_table.pm:1
-#, c-format
-msgid "Error reading file %s"
-msgstr "Greơka u čitanju datoteke %s"
-
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Da koristite ovaj izbor spaĆĄenih paketa, bootajte instalaciju sa ``linux "
-"defcfg=floppy''"
+msgid "Wizard Configuration"
+msgstr "Čarobnjak za podeơavanje"
-#: ../../install_any.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "Ova disketa nije FAT formatirana"
+msgid "Autoprobe"
+msgstr "Ispitivanje"
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Ubacite FAT formatiranu disketu u jedinicu %s"
+msgid "Backup system files..."
+msgstr "Backup-uj sistemske datoteke..."
#: ../../install_any.pm:1
#, c-format
msgid "Can't use broadcast with no NIS domain"
msgstr "Ne mogu koristiti broadcast bez NIS domene"
-#: ../../install_any.pm:1
-#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-"Da bi se omogućilo unaprjeđenje vaơeg sistema, biće uklonjeni sljedeći "
-"paketi: %s\n"
-"\n"
-"\n"
-"Ćœelite li zaista deinstalirati ove pakete?\n"
-
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No"
-msgstr "Ne"
+msgid "Removing printer \"%s\"..."
+msgstr "Uklanjam ơtampač \"%s\" ..."
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Yes"
-msgstr "Da"
+msgid "drakfloppy"
+msgstr "drakfloppy"
-#: ../../install_any.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
+"Please indicate where the auto_install.cfg file is located.\n"
"\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
-"Do you really want to install these servers?\n"
msgstr ""
-"Izabrali ste sljedeći server (servere): %s\n"
-"\n"
-"\n"
-"Ovi serveri su aktivirani automatski. Oni nemaju nikakvih poznatih "
-"sigurnosnih\n"
-"problema, ali moĆŸda će biti pronađeni u budućnosti. U tom slučaju, morate "
-"ih\n"
-"upgrade-ovati ơto prije bude moguće.\n"
+"Molim navedite gdje se nalazi datoteka auto_install.cfg.\n"
"\n"
+"Ostavite ovo praznim ako ne ĆŸelite podesiti reĆŸim automatske instalacije.\n"
"\n"
-"Da li zaista ĆŸelite instalirati ove servere?\n"
-
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System configuration"
-msgstr "PodeĆĄavanje sistema"
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System installation"
-msgstr "Instalacija sistema"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Bringing down the network"
-msgstr "Zaustavljam mreĆŸu"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "information level that can be obtained through the cpuid instruction"
+msgstr "Nivo informacija koje se mogu dobiti cpuid instrukcijom"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Bringing up the network"
-msgstr "Pokrećem mreĆŸu"
+msgid "Peru"
+msgstr "Peru"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Particioniranje nije uspjelo: %s"
+msgid " on device: %s"
+msgstr "na uređaju: %s"
#: ../../install_interactive.pm:1
#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX Particioni čarobnjak je naơao sljedeća rjeơenja:"
+msgid "Remove Windows(TM)"
+msgstr "Ukloni Windows(TM)"
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "I can't find any room for installing"
-msgstr "Ne mogu naći dovoljno prostora za instalaciju"
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr "Pokreće X Font Server (ovo je nuĆŸno da bi XFree radio)."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
msgstr ""
-"Sada moĆŸete particionirati %s.\n"
-"Kada zavrĆĄite, ne zaboravite spasiti sa `w'"
+"Većinu ovih vrijednosti uzimam iz\n"
+"vaĆĄeg aktivnog sistema.\n"
+"MoĆŸete ih izmijeniti po potrebi."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Use fdisk"
-msgstr "Koristi fdisk"
+msgid "Select the font file or directory and click on 'Add'"
+msgstr "Izaberite font datoteku ili direktorij i kliknite na 'Dodaj'"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Custom disk partitioning"
-msgstr "Ručno particioniranje diska"
+msgid "Madagascar"
+msgstr "Madagaskar"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"SVE postojeće particije i podaci na njima će biti izgubljeni na disku %s"
+msgid "Urpmi"
+msgstr "Urpmi"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Imate viĆĄe od jednog hard diska. Na koji od njih ĆŸelite instalirati Linux?"
+msgid "Cron not available yet as non-root"
+msgstr "Kron joĆĄ uvijek nije dostupan kao ne-root"
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Erase entire disk"
-msgstr "Pobriơi čitav disk"
+msgid "System"
+msgstr "Sistem"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Ukloni Windows(TM)"
+msgid "Do you want to use this feature?"
+msgstr "Da li ĆŸelite koristiti ovu mogućnost?"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr ""
-"Ne postoji nijedna FAT particija za promjenu veličine (ili nije ostalo "
-"dovoljno prostora)"
+msgid "Arabic"
+msgstr "Arapska"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"\n"
+"- Options:\n"
msgstr ""
-"Da bi se osigurao integritet podataka nakon promjene veličine, \n"
-"prilikom idućeg pokretanja Windows(TM) biće izvrơena provjera datotečnog "
-"sistema"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Smanjivanje FAT particije nije uspjelo: %s"
+"\n"
+"- Opcije:\n"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Resizing Windows partition"
-msgstr "Smanjujem Windows particiju"
+msgid "Password required"
+msgstr "Potrebna ĆĄifra"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Resizing"
-msgstr "Mijenjam veličinu"
+msgid "%d minutes"
+msgstr "%d minuta"
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "partition %s"
-msgstr "particiji %s"
+msgid "Graphics card: %s"
+msgstr "Grafička karta: %s"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Koju veličinu ĆŸelite da sačuvate za Windows na"
+msgid "WebDAV transfer failed!"
+msgstr "WebDAV transfer nije uspio!"
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"UPOZORENJE!\n"
-"\n"
-"DrakX će sada promijeniti veličinu vaĆĄe Windows particije. Budite paĆŸljivi, "
-"ova\n"
-"operacija je opasna. Ako to već niste uradili, najprije napustite "
-"instalaciju,\n"
-"pokrenite scandisk pod Windowsom (opcionalno pokrenite defrag), zatim\n"
-"ponovo pokrenite instalaciju. Također biste trebali spasiti sve podatke.\n"
-"Kada ste sigurni, kliknite na Ok."
+msgid "XFree configuration"
+msgstr "XFree konfiguracija"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
-msgstr ""
-"VaĆĄa Windows particija je previĆĄe fragmentirana. Molim restartujte vaĆĄ "
-"računar pod Windows-om, pokrenite ``defrag'' alat, zatim pokrenite Mandrake "
-"Linux instalaciju."
+msgid "Choose action"
+msgstr "Izaberi akciju"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Izračunavam veličinu Windows particije"
+msgid "French Polynesia"
+msgstr "Francuska Polinezija"
-#: ../../install_interactive.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
msgstr ""
-"FAT resizer ne moĆŸe izmijeniti vaĆĄu particiju, \n"
-"doơlo je do sljedeće greơke: %s"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Kojoj particiji ĆŸelite promijeniti veličinu?"
+"Obično DrakX nema problema da odredi broj dugmadi na vaơem miơu.\n"
+"Ako ima, pretpostaviće da imate miơ sa dva dugmeta i podesiće simulaciju\n"
+"trećeg dugmeta. Treće dugme se moĆŸe ''pritisnuti'' na miĆĄu sa dva dugmeta\n"
+"istovremenim klikom na lijevo i desno dugme miơa. DrakX će automatski\n"
+"znati da li miĆĄ koristi PS/2, serijski ili USB interfejs.\n"
+"\n"
+"Ako iz nekog razloga ĆŸelite navesti drugačiji tip miĆĄa, izaberite ga sa\n"
+"ponuđene liste.\n"
+"\n"
+"Ako izaberete miơ različit od ponuđenog, biće prikazan testni ekran.\n"
+"Koristite miơ i točkić da potvrdite da su postavke tačne i da miơ radi "
+"ispravno.\n"
+"Ako miĆĄ ne radi kako treba, pritisnite tipku space ili Enter da prekinete "
+"test\n"
+"i vratite se na listu izbora.\n"
+"\n"
+"Miơevi sa točkićem često nisu prepoznati automatski, stoga trebate izabrati\n"
+"miơ na listi. Pazite da izaberete odgovarajući port na koji je vaơ miơ "
+"priključen.\n"
+"Nakon izbora miơa i pritiska na dugme \"Dalje ->\", na ekranu će biti "
+"prikazana\n"
+"slika miơra. Pomjerajte točkić miơa kako biste provjerili da li ispravno "
+"funkcioniĆĄe.\n"
+"Kada vidite da se točkić na ekranu pomjera onako kako vi vrtite stvarni "
+"točkić,\n"
+"provjerite dugmad i provjerite da li se pokazivač na ekranu pomjera onako "
+"kako\n"
+"vi pomjerate miĆĄ."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Koristi slobodan prostor na Windows particiji"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "Podrơka za OKI 4w i kompatibilne 'winprinter' ơtampače."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"Ne postoji nijedna FAT particija za upotrebu kao loopback (ili nije ostalo "
-"dovoljno prostora)"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr "Pokreće ALSA zvučni sistem (Advanced Linux Sound Architecture)"
-#: ../../install_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Veličina swap particije u MB:"
+msgid "Installing driver for %s card %s"
+msgstr "Instaliram drajver za %s karticu %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Root partition size in MB: "
-msgstr "Veličina root particije u MB:"
+msgid ""
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
+msgstr ""
+"Prebacili ste vaơ bivơi podrazumjevani ơtampač (\"%s\"),Da li će to također "
+"biti podrazumjevani ơtampač podnovim sistemom ơtampe %s?"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Choose the sizes"
-msgstr "Izaberite veličine"
+msgid "Enable Server"
+msgstr "Omogući server"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Koju particiju ĆŸelite koristiti za Linux4Win?"
+msgid "Ukrainian"
+msgstr "Ukrajinska"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Koristi Windows particiju za loopback"
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
+msgstr ""
+"MreĆŸni pristup nije aktivan i nije mogao biti pokrenut. Molimo provjerite "
+"vaĆĄu konfiguraciju i vaĆĄ hardware. Onda ponovo pokuĆĄajte podesiti udaljeni "
+"ơtampač."
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "There is no existing partition to use"
-msgstr "Nema nijedne postojeće particije za upotrebu"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "Molimo ubacite boot disketu koju ste koristili u jedinicu %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use existing partitions"
-msgstr "Koristi postojeću particiju"
+msgid "Local network(s)"
+msgstr "Lokalna mreĆŸa (mreĆŸe)"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nema dovoljno slobodnog prostora za pravljenje novih particija"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
+msgstr "Ukloni Windows(TM)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Use free space"
-msgstr "Koristi slobodan prostor"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr ""
+"VaĆĄ %s je podeĆĄen.\n"
+"Sada moĆŸete skenirati dokumente koristeći \"XSane\" koji se nalazi u meniju "
+"Aplikacije/Multimedija/Grafika."
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Morate imati FAT particiju montiranu na /boot/efi"
+msgid "Firewire controllers"
+msgstr "Firewire kontroleri"
-#: ../../install_interactive.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"You don't have a swap partition.\n"
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
"\n"
-"Continue anyway?"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
msgstr ""
-"Nemate nijednu swap particiju\n"
+"Nakon ơto podesite opơte parametre bootloadera, dobićete listu opcija\n"
+"koja će biti prikazana prilikom svakog boot-a.\n"
"\n"
-"Svejedno nastavi?"
+"Ako na vaơem računaru postoje neki drugi operativni sistemi, oni će biti\n"
+"dodani na tu listu. MoĆŸete fino podesiti postojeće opcije klikajući na "
+"dugme\n"
+"\"Dodaj\" da biste dodali novu opciju; izborom postojeće opcije i klikanjem\n"
+"na \"Izmijeni\" ili \"Ukloni\" da biste je izmijenili ili uklonili. \"U redu"
+"\" potvrđuje\n"
+"vaĆĄe izmjene.\n"
+"\n"
+"Takođe moĆŸda ne ĆŸelite dati pristup na ove druge operativne sisteme bilo "
+"kome\n"
+"ko sjedne za računar i restartuje ga. MoĆŸete obrisati pojedine stavke iz "
+"boot\n"
+"menija, ali odgovarajuće operativne sisteme viơe nećete moći pokrenuti bez\n"
+"boot diskete!"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Morate imati root particiju.\n"
-"Za ovo, napravite jednu particiju (ili kliknite na neku od postojećih).\n"
-"Zatim izaberite opciju ``Tačka montiranja'' i postavite je na `/'"
+msgid "System mode"
+msgstr "Sistem mod"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
msgstr ""
-"Neki dio hardware-a na vaơem računaru zahtjeva ``vlasničke'' drajvere za "
-"rad.\n"
-"MoĆŸete naći viĆĄe podataka o njima na: %s"
+"Da biste ơtampali na NetWare ơtampač, trebate dati naziv NetWare print "
+"servera (PaĆŸnja! Ono moĆŸe biti različito od njegovog TCP/IP imena!) kao i "
+"naziv reda za ĆĄtampu na ĆĄtampaču kojem ĆŸelite pristupiti i eventualno "
+"korisničko ime i ơifru."
-#: ../../install_messages.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Čestitamo, instalacija je zavrơena.\n"
-"Uklonite boot medij i pritisnite return za reboot.\n"
-"\n"
-"\n"
-"Za informacije o ispravkama koje su dostupne za ovu verziju Mandrake "
-"Linuxa,\n"
-"pogledajte Errata koja je dostupna na:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Informacije o podeĆĄavanju vaĆĄeg sistema su dostupne u poglavlju\n"
-"\"nakon instalacije\" vaơeg Zvaničnog Mandrake Linux priručnika za upotrebu."
+msgid "Netmask:"
+msgstr "Netmask:"
-#: ../../install_messages.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr "http://www.mandrakelinux.com/en/91errata.php3"
+msgid "Append"
+msgstr "Append"
-#: ../../install_messages.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr ""
+"OsvjeĆŸi listu ĆĄtampača (kako bi bili prikazani svi dostupni CUPS ĆĄtampači)"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
msgstr ""
+"Kada je upaljena ova opcija, prilikom svakog pokretanja CUPSa biće "
+"provjereno da\n"
"\n"
-"PaĆŸnja\n"
-"\n"
-"Molim pročitajte paĆŸljivo uslove licence ispod. Ako se ne slaĆŸete sa bilo\n"
-"kojim dijelom, nije vam dozvoljeno da instalirate naredni CD medij. "
-"Pritisnite\n"
-"dugme 'odbij' da biste nastavili sa instalacijom bez koriĆĄtenja ovog "
-"medija.\n"
-"Budući da prevodilac ovog teksta nije u mogućnosti da osigura pravnu\n"
-"provjeru prevedenog teksta, tekst je ostavljen u originalnom (engleskom)\n"
-"obliku.\n"
+"- je instaliran LPD/LPRng, CUPS neće prepisati /etc/printcap\n"
"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
+"- postoji /etc/cups/cupsd.conf, ako ne onda će biti napravljen\n"
"\n"
+"- informacije o ĆĄtampaču ne sadrĆŸe \"localhost\" kao ime servera prilikom "
+"broadcasta.\n"
"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
+"Ako vam neke od ovih mjera stvaraju probleme, moĆŸete isključiti ovu opciju, "
+"ali onda se morate sami brinuti da su navedeni uslovi ispunjeni."
-#: ../../install_messages.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
-"5. Governing Laws \n"
+"It also provides a much higher API than OSS.\n"
"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
msgstr ""
-"Budući da prevodilac ovog teksta nije u mogućnosti da osigura pravnu\n"
-"provjeru prevedenog teksta, tekst licence je ostavljen u originalnom "
-"(engleskom)\n"
-"obliku.\n"
-"\n"
-"\n"
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
+"OSS (Open Sound System) je bio prvi API za zvuk. To je API neovisan od "
+"operativnog sistema (dostupan je na većini UNIX sistema), ali je vrlo "
+"elementaran i ograničen.\n"
+"Pored toga, svi OSS drajveri ponovo izmiơljaju točak.\n"
"\n"
+"ALSA (Advanced Linux Sound Architecture) je modularizovana arhitektura koja\n"
+"podrĆŸava prilično velik broj ISA, USB i PCI kartica.\n"
"\n"
-"5. Governing Laws \n"
+"Ona takođe pruĆŸa mnogo viĆĄi API nego OSS.\n"
"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Prelazim na korak `%s'\n"
-
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Help"
-msgstr "Pomoć"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "not configured"
-msgstr "nije podeĆĄeno"
-
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
-#, c-format
-msgid "Configure"
-msgstr "Podesi"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Go on anyway?"
-msgstr "Svejedno nastavi?"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "DoĆĄlo je do greĆĄke kod instaliranja paketa:"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Doơlo je do greơke pri naručivanju paketa:"
+"Da biste koristili ALSA, moĆŸete koristiti:\n"
+"- stari API kompatibilan sa OSSom\n"
+"- novi ALSA API koji pruĆŸa mnoge napredne mogućnosti, ali zahtijeva upotrebu "
+"ALSA biblioteke.\n"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Change your Cd-Rom!\n"
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
+"You may prefer to replay the installation.\n"
msgstr ""
-"Promijenite vaĆĄ CD-ROM!\n"
+"Ova auto instalacija moĆŸe biti potpuno automatizovana ako ĆŸelite,\n"
+"u kojem slučaju će ona preuzeti hard disk!!\n"
+"(ovo je namjenjeno za instaliranje na drugi računar).\n"
"\n"
-"Molimo ubacite CD označen sa \"%s\" u vaơ CD-ROM uređaj i pritisnite \"U redu"
-"\" kad ste spremni.\n"
-"Ako ga nemate, pritisnite \"Odustani\" da biste preskočili instalaciju sa "
-"tog CD-ROMa."
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Refuse"
-msgstr "Odbij"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Accept"
-msgstr "Prihvati"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Installing package %s"
-msgstr "Instaliram paket %s"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "%d packages"
-msgstr "%d paketa"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "No details"
-msgstr "Nema detalja"
+"MoĆŸda ćete radije ĆŸeljeti ponoviti instalaciju.\n"
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Details"
-msgstr "Detalji"
+msgid "Network printer \"%s\", port %s"
+msgstr "MreĆŸni ĆĄtampač \"%s\", port %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Molim sačekajte, pripremam instalaciju..."
+msgid ""
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
+msgstr ""
+"Molimo izaberite koji mreĆŸni adapter će biti spojen na vaĆĄu Lokalnu mreĆŸu."
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Time remaining "
-msgstr "Preostalo vremena "
+msgid "OK to restore the other files."
+msgstr "OK za vraćanje ostalih datoteka."
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Estimating"
-msgstr "Procjenjujem"
+msgid "Please choose your keyboard layout."
+msgstr "Molimo izaberite izgled vaĆĄe tastature."
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Installing"
-msgstr "Instaliram"
+msgid "Printer Device URI"
+msgstr "URI uređaja ơtampača"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Izaberite pakete koje ĆŸelite instalirati"
+msgid "Not erasable media!"
+msgstr "Medij nije izbrisiv!"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Minimal install"
-msgstr "Minimalna instalacija"
+msgid "Terminal-based"
+msgstr "Terminal"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Updating package selection"
-msgstr "OsvjeĆŸavam izbor paketa"
+msgid "Installing a printing system in the %s security level"
+msgstr "Instaliram sistem za ĆĄtampu na sigurnosnom nivou: %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Load/Save on floppy"
-msgstr "Učitaj/snimi na disketu"
+msgid "The user name is too long"
+msgstr "Korisničko ime je predugačko"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "<- Previous"
-msgstr "<- Nazad"
+msgid "Other OS (windows...)"
+msgstr "Ostali OSi (Windows...)"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Install"
-msgstr "Instalacija"
+msgid "WebDAV remote site already in sync!"
+msgstr "Udaljeni WebDAV sajt je već sinhroniziran!"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Show automatically selected packages"
-msgstr "Automatski prikaĆŸi izabrane pakete"
+msgid "Reading printer database..."
+msgstr "Čitam bazu podataka o ơtampačima ..."
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Ne moĆŸete isključiti ovaj paket. On mora biti unaprijeđen"
+msgid "Generate auto install floppy"
+msgstr "Napravi auto instalacijsku disketu"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
msgstr ""
-"Ovaj paket mora biti unaprijeđen\n"
-"Jeste li sigurni da ga ĆŸelite isključiti?"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "Ne moĆŸete isključiti ovaj paket. On je već instaliran"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Ovo je obavezan paket, ne moĆŸe biti isključen"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't select/unselect this package"
-msgstr "Ne moĆŸete izabrati/isključiti ovaj paket"
+"\t\t korisničko ime: %s\n"
+"\t\t u direktoriju: %s \n"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The following packages are going to be removed"
-msgstr "Sljedeći paketi će biti uklonjeni"
+msgid "Somalia"
+msgstr "Somalija"
-#: ../../install_steps_gtk.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "The following packages are going to be installed"
-msgstr "Sljedeći paketi će biti instalirani"
+msgid "No open source driver"
+msgstr "Nema open source drajver"
-#: ../../install_steps_gtk.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Ne moĆŸete izabrati ovaj paket jer nema dovoljno prostora za njega"
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
+msgstr ""
+"Baziran na prethodnom nivou, ali sada je sistem potpuno zatvoren.\n"
+"Sigurnosne osobine na maksimumu."
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Importance: %s\n"
-msgstr "Značaj: %s\n"
+msgid "Nicaragua"
+msgstr "Nikaragva"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Size: %d KB\n"
-msgstr "Veličina: %d KB\n"
+msgid "New Caledonia"
+msgstr "Nova Kaledonija"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Version: %s\n"
-msgstr "Verzija: %s\n"
+msgid "European protocol (EDSS1)"
+msgstr "Evropski protokol (EDSS1)"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Name: %s\n"
-msgstr "Ime: %s\n"
+msgid "Video mode"
+msgstr "Video mod"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bad package"
-msgstr "Neispravan paket"
+msgid "Please enter your email address below "
+msgstr "Molimo unesite vaĆĄu email adresu ispod"
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other"
-msgstr "Ostalo"
+msgid "Oman"
+msgstr "Oman"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Ukupna veličina: %d / %d MB"
+msgid "Network Monitoring"
+msgstr "Nadzor mreĆŸe"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Next ->"
-msgstr "Dalje ->"
+msgid "SunOS"
+msgstr "SunOS"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Individual package selection"
-msgstr "Izbor pojedinačnih paketa"
+msgid "New size in MB: "
+msgstr "Nova veličina u MB: "
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Package Group Selection"
-msgstr "Izbor grupe paketa"
+msgid "Partition table type: %s\n"
+msgstr "Tip tabele particija: %s\n"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"VaĆĄem sistemu ponestaje resursa. MoĆŸda imate neki problem sa instalacijom\n"
-"Mandrake Linuxa. Ako se ovo desi, moĆŸete pokuĆĄati tekstualnu instalaciju. Za "
-"ovo,\n"
-"pritisnite `F1' prilikom bootanja CDROMa, zatim unesite `text'."
+msgid "Authentication Windows Domain"
+msgstr "Autentikacijska Windows domena"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Save packages selection"
-msgstr "Spasi izbor paketa"
+msgid "US keyboard"
+msgstr "US tastatura"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Automated"
-msgstr "Automatizovano"
+msgid "Buttons emulation"
+msgstr "Emulacija dugmeta"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Replay"
-msgstr "Ponovi"
+msgid ", network printer \"%s\", port %s"
+msgstr ", mreĆŸni ĆĄtampač \"%s\", port %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
"\n"
-"You may prefer to replay the installation.\n"
+"Drakbackup activities via tape:\n"
+"\n"
msgstr ""
-"Ova auto instalacija moĆŸe biti potpuno automatizovana ako ĆŸelite,\n"
-"u kojem slučaju će ona preuzeti hard disk!!\n"
-"(ovo je namjenjeno za instaliranje na drugi računar).\n"
"\n"
-"MoĆŸda ćete radije ĆŸeljeti ponoviti instalaciju.\n"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Generate auto install floppy"
-msgstr "Napravi auto instalacijsku disketu"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Reboot"
-msgstr "Restartuj"
+"Drakbackup aktivnosti putem trake:\n"
+"\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Some steps are not completed.\n"
"\n"
-"Do you really want to quit now?"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
msgstr ""
-"Neki koraci nisu dovrĆĄeni.\n"
"\n"
-"Da li zaista ĆŸelite izaći sada?"
+" Problem sa FTP konekcijom: Nije bilo moguće poslati vaơe backup datoteke "
+"putem FTPa.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Creating auto install floppy..."
-msgstr "Pravim auto instalacijsku disketu..."
+msgid "Sending Speed:"
+msgstr "Brzina slanja:"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Ubacite praznu disketu u jedinicu %s"
+msgid "Halt bug"
+msgstr "Halt bug"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"MoĆŸda ćete trebati promijeniti vaĆĄ Open Firmware boot uređaj\n"
-" da biste aktivirali bootloader. Ako ne vidite upit bootloadera\n"
-" prilikom bootanja, drĆŸite Command-Option-O-F prilikom boota\n"
-" i unesite:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Zatim kucajte: shut-down\n"
-"Prilikom idućeg boota biste trebali vidjeti upit bootloadera."
+msgid "Mail alert configuration"
+msgstr "PodeĆĄavanje Mail obavijesti"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Instalacija bootloadera nije uspjela. Doơlo je do sljedeće greơke:"
+msgid "Tokelau"
+msgstr "Tokelau"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Installing bootloader"
-msgstr "Instaliram bootloader"
+msgid "Bosnian"
+msgstr "Bosanska"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"GreĆĄka u instaliranju aboota, \n"
-"da li da pokuơam nasilnu instalaciju čak i ako to uniơti prvu particiju?"
+msgid "Release: "
+msgstr "Izdanje:"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Do you want to use aboot?"
-msgstr "Da li ĆŸelite koristiti aboot?"
+msgid "Connection speed"
+msgstr "Brzina konekcije"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
msgstr ""
-"Izgleda da imate OldWorld ili Unknown računar,\n"
-" yaboot bootloader neće raditi kod vas.\n"
-"Instalacija će se nastaviti, ali ćete\n"
-" morati koristiti BootX za bootanje vaơeg računara"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Preparing bootloader..."
-msgstr "Pripremam bootloader..."
+"Molim unesite naziv uređaja vaơeg CD Writera\n"
+" npr: 0,1,0"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Domain Admin Password"
-msgstr "Administratorska ĆĄifra domena"
+msgid "Namibia"
+msgstr "Namibija"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Domain Admin User Name"
-msgstr "Korisničko ime domenskog administratora"
+msgid "Database Server"
+msgstr "Server baze podataka"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Windows Domain"
-msgstr "Windows domena"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr "posebne mogućnosti drajvera (mogućnost prĆŸenja i/ili podrĆĄka za DVD)"
-#: ../../install_steps_interactive.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Authentication Windows Domain"
-msgstr "Autentikacijska Windows domena"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "Ne mogu dodati particiju na _formatiran_ RAID md%d"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"Da bi ovo radilo sa W2K PDCom, vjerovatno će biti potrebno da admin izvrơi:\n"
-" C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add\n"
-"i restartuje server. Takođe će vam trebati korisničko ime i ơifra "
-"administratora domena da biste pridruĆŸili računar Windows(tm) domenu.\n"
-"Ako mreĆŸa joĆĄ nije aktivirana, DrakX će pokuĆĄati pristupanje domenu tek "
-"nakon ĆĄto prođete kroz korak podeĆĄavanja mreĆŸe.\n"
-"Ako ovo podeĆĄavanje iz nekog razloga ne uspije i prijava na domen ne bude "
-"izvrơena, izvrơite naredbu 'smbpasswd -j DOMAIN -U USER%%PASSWORD' koristeći "
-"vaơu Windows(tm) domenu, kao i administratorovo korisničko ime i ơifru nakon "
-"pokretanja sistema.\n"
-"Naredba 'wbinfo -t' će provjeriti da li su vaơi podaci ispravni."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Server"
-msgstr "NIS server"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Domain"
-msgstr "NIS domen"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Authentication NIS"
-msgstr "Autentifikacija NIS"
+"VaĆĄa kartica moĆŸe imati podrĆĄku za 3D hardversko ubrzanje sa XFree %s,\n"
+"PAĆœNJA OVO JE EKSPERIMENTALNA PODRĆ KA I MOĆœE ZALEDITI VAĆ  RAČUNAR.\n"
+"VaĆĄu karticu takođe podrĆŸava XFree %s koji moĆŸe imati bolju podrĆĄku za 2D."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "NIS"
-msgstr "NIS"
+msgid "Please wait, setting security options..."
+msgstr "Molim sačekajte, podeơavam sigurnosne opcije..."
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "LDAP Server"
-msgstr "LDAP Server"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr "Nepoznat|CPH05X (bt878) [razni proizvođači]"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
+msgid "Launch the graphical environment when your system starts"
+msgstr "Pokreni X-Window sistem na startu"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Authentication LDAP"
-msgstr "Autentikacijski LDAP"
+msgid "hourly"
+msgstr "svakog sata"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LDAP"
-msgstr "LDAP"
+msgid " Successfuly Restored on %s "
+msgstr " uspjeĆĄno spaĆĄeni na %s "
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Local files"
-msgstr "Lokalne datoteke"
+msgid "Making printer port available for CUPS..."
+msgstr "Omogućujem pristup ơtampaču putem CUPSa..."
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Authentication"
-msgstr "Autentikacija"
+msgid "Antigua and Barbuda"
+msgstr "Antigua i Barbuda"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
+msgid ""
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""
-"Ova ĆĄifra je previĆĄe jednostavna (mora biti duga najmanje %d karaktera)"
-
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "No password"
-msgstr "Bez ĆĄifre"
+"!!! Određuje ơifru u sistemskoj bazi podataka koja se razlikuje\n"
+"od one u bazi podataka Terminal Servera.\n"
+"Obriơite i ponovo dodajte korisnika u Terminal Server da biste omogućili "
+"pristup."
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Set root password"
-msgstr "Podesite root ĆĄifru"
+msgid "Spanish"
+msgstr "Ć panska"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr "Niste podesili X. Sigurno ĆŸelite uraditi ovo?"
+msgid "Start"
+msgstr "Start"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Servisi: %d aktiviran za %d registrovan"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Services"
-msgstr "Servisi"
+msgid "Configuring applications..."
+msgstr "PodeĆĄavam aplikacije..."
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "System"
-msgstr "Sistem"
+msgid "Normal modem connection"
+msgstr "Normalna modemska konekcija"
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "%s on %s"
-msgstr "%s na %s"
+msgid "File Selection"
+msgstr "Izbor datoteka"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Bootloader"
-msgstr "Bootloader"
+msgid ""
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+" tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+" standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
+msgstr ""
+"Koju ISDN konfiguraciju ĆŸelite?\n"
+"\n"
+"* Stara konfiguracija koristi isdn4net. On sadrĆŸi moćne alate,\n"
+" ali ga je teĆĄko podesiti i nije standardiziran.\n"
+"\n"
+"* Novu konfiguraciju je lakĆĄe razumjeti, standardnija je,\n"
+" ali ima manje alata.\n"
+"\n"
+"Preporučujemo light konfiguraciju.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
-msgid "Boot"
-msgstr "Boot"
+msgid "CUPS"
+msgstr "CUPS"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "disabled"
-msgstr "isključen"
+msgid "Run config tool"
+msgstr "Pokreni alat za podeĆĄavanje"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "activated"
-msgstr "aktiviran"
+msgid "Bootloader installation"
+msgstr "Instalacija bootloadera"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Firewall"
-msgstr "Firewall"
+msgid "Root partition size in MB: "
+msgstr "Veličina root particije u MB:"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Security"
-msgstr "Sigurnost"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "Ovo je obavezan paket, ne moĆŸe biti isključen"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Security Level"
-msgstr "Sigurnosni nivo"
+msgid "Etherboot ISO image is %s"
+msgstr "Etherboot ISO image je %s"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Network"
-msgstr "MreĆŸa"
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"named (BIND) je Domain Name Server (DNS) koji se koristi za određivanje IP "
+"adrese iz imena računara."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Network & Internet"
-msgstr "MreĆŸa i Internet"
+msgid "Disconnect..."
+msgstr "Prekini konekciju..."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Graphical interface"
-msgstr "Grafički interfejs"
+msgid "Saint Lucia"
+msgstr "Saint Lucia"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Hardware"
-msgstr "Hardware"
+msgid "Report"
+msgstr "IzvjeĆĄtaj"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "TV card"
-msgstr "TV kartica"
+msgid "Palau"
+msgstr "Palau"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"Nije otkrivena zvučna kartica. Probajte \"harddrake\" poslije instalacije"
+msgid "level"
+msgstr "nivo"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
msgstr ""
-"Pokrenite \"sndconfig\" poslije instalacije kako biste podesili vaơu zvučnu "
-"karticu"
+"Sve incidente će pratiti jedan kvalificiran MandrakeSoft tehnički eksper."
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "Imate li ISA zvučnu karticu?"
+msgid "Package Group Selection"
+msgstr "Izbor grupe paketa"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sound card"
-msgstr "Zvučna kartica"
+msgid "Restore Via Network Protocol: %s"
+msgstr "Restore putem mreĆŸnog protokola: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Remote CUPS server"
-msgstr "Udaljeni CUPS server"
+msgid "You can configure each parameter of the module here."
+msgstr "Ovdje moĆŸete podesiti svaki parametar modula."
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "No printer"
-msgstr "Nema ơtampača"
+msgid "Choose the resolution and the color depth"
+msgstr "Izaberite rezoluciju i broj boja"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Printer"
-msgstr "Ơtampač"
+msgid "Emulate third button?"
+msgstr "Emuliraj treće dugme?"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mouse"
-msgstr "MiĆĄ"
+msgid ""
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
+msgstr ""
+"Ne moĆŸete napraviti novu particiju\n"
+"(poĆĄto ste dosegli maksimalan broj primarnih particija).\n"
+"Najprije uklonite primarnu particiju i napravite extended (proĆĄirenu) "
+"particiju."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Timezone"
-msgstr "Vremenska zona"
+msgid "Mount"
+msgstr "Montiraj"
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Keyboard"
-msgstr "Tastatura"
+msgid "Creating auto install floppy"
+msgstr "Pravim auto instalacijsku disketu"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Summary"
-msgstr "Ukratko"
+msgid "Install updates"
+msgstr "Instaliraj update"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "NTP Server"
-msgstr "NTP server"
+msgid "text box height"
+msgstr "visina tekst polja"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatska sinhronizacija vremena (koristeći NTP)"
+msgid "State"
+msgstr "Status"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Hardverski sat podeĆĄen na GMT"
+msgid "Be sure a media is present for the device %s"
+msgstr "Provjeri da li je medij prisutan za ovaj uredjaj %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which is your timezone?"
-msgstr "Koja je vaĆĄa vremenska zona?"
+msgid "Enable multiple profiles"
+msgstr "Omogući viơe profila"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Would you like to try again?"
-msgstr "Ćœelite li ponovo pokuĆĄati?"
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
+msgstr ""
+"Ove opcije mogu spasiti ili vratiti sve datoteke u vaĆĄem /etc direktoriju.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Ne mogu pristupiti mirroru %s"
+msgid "Local printer"
+msgstr "Lokalni ơtampač"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Kontaktiram mirror da bih saznao listu dostupnih paketa..."
+msgid "Files Restored..."
+msgstr "Vraćene datoteke..."
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Izaberite mirror sa kojeg će biti dobavljeni paketi"
+msgid "Package selection"
+msgstr "Izbor paketa"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr ""
-"Kontaktiram Mandrake Linux web stranicu da bih saznao listu dostupnih "
-"mirrora..."
+msgid "Mauritania"
+msgstr "Mauritanija"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
"\n"
-"Do you want to install the updates ?"
msgstr ""
-"Sada imate mogućnost da dobavite sa Interneta nove verzije paketa koji\n"
-"su izaơli nakon ơto je distribucija objavljena. Među njima su sigurnosne "
-"zakrpe\n"
-"i ispravke bugova.\n"
+"Mogu zadrĆŸati trenutnu konfiguraciju i pretpostaviti da ste već podesili "
+"DHCP server; u tom slučaju molim provjerite da li sam ispravno pročitao "
+"MreĆŸnu adresu koju ćete koristiti na lokalnoj mreĆŸi; neću je ponovo podesiti "
+"i neću mijenjati vaơe postavke DHCP servera.\n"
"\n"
-"Da biste izvrĆĄili download, potrebno je da podesite Internet konekciju.\n"
+"PredloĆŸena DNS postavka je Caching nameserver koji je podeĆĄen na firewallu. "
+"MoĆŸete je zamijeniti npr. IP adresom DNS servera vaĆĄeg ISPa.\n"
+"\t\t \n"
+"Ako ne, mogu ponovo podesiti vaĆĄ interfejs i podesiti DHCP server za vas.\n"
"\n"
-"Da li ĆŸelite instalirati update-ovane pakete ?"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Molimo ubacite disketu Update Modula u jedinicu %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Molimo ubacite boot disketu koju ste koristili u jedinicu %s"
+msgid ""
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
+msgstr ""
+"Nije pronađen nijedan lokalni ĆĄtampač! Ako ĆŸelite ručno instalirati ĆĄtampač, "
+"unesite ime uređaja / ime datoteke na ulaznu liniju (Paralelni portovi: /dev/"
+"lp0, /dev/lp1, ..., ekvivalentno LPT1:, LPT2:, ..., prvi USB ơtampač: /dev/"
+"usb/lp0, drugi USB ơtampač: /dev/usb/lp1, ...)."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Post-install configuration"
-msgstr "Post-instalacijsko podeĆĄavanje"
+msgid "All primary partitions are used"
+msgstr "Sve primarne particije su u upotrebi"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Installing package %s\n"
-"%d%%"
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
msgstr ""
-"Instaliram paket %s\n"
-"%d%%"
+"Nakon ơto je to gotovo, preporučujemo da restartujete vaơ X\n"
+"okoliơ kako bi se izbjegao problem sa promjenom naziva računara."
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Preparing installation"
-msgstr "Pripremam instalaciju"
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr "Automatsko prepoznavanje i podeĆĄavanje hardware-a tokom boota."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM pod oznakom \"%s\""
+msgid "Installation Server Configuration"
+msgstr "PodeĆĄavanje instalacionog servera"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Ako imate sve CDe na listi, kliknite na Ok.\n"
-"Ako nemate nijedan od ovih CDova, kliknite na Odustani.\n"
-"Ako nedostaju samo neki CDovi, isključite ih, zatim kliknite na Ok."
+msgid "Configuring IDE"
+msgstr "PodeĆĄavam IDE"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "All"
-msgstr "Svi"
+msgid "Network functionality not configured"
+msgstr "MreĆŸna funkcionalnost nije podeĆĄena"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Stvarno minimalna instalacija (posebno bez urpmi)"
+msgid "Configure module"
+msgstr "Podesi modul"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Sa osnovnom dokumentacijom (preporučeno)"
+msgid "Cocos (Keeling) Islands"
+msgstr "Kokosova ostrva"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "With X"
-msgstr "Sa X-om"
+msgid "Disconnecting from the Internet "
+msgstr "Prekidam vezu na Internet"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
+msgid "You'll need to reboot before the modification can take place"
msgstr ""
-"Niste izabrali nijednu grupu paketa\n"
-"Molimo izaberite minimalnu instalaciju koju ĆŸelite:"
+"Biće potrebno da rebootate prije nego ơto izmjene mogu stupiti na snagu"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Type of install"
-msgstr "Vrsta instalacije"
+msgid "Provider phone number"
+msgstr "Broj telefona provajdera"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Selected size is larger than available space"
-msgstr "Izabrana veličina je veća od slobodnog prostora"
+msgid "Host %s"
+msgstr "Računar %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "Ubacite disketu koja sadrĆŸi izbor paketa"
+msgid "Armenia"
+msgstr "Armenija"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Loading from floppy"
-msgstr "Učitavam sa diskete"
+msgid "Fiji"
+msgstr "FidĆŸi"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Package selection"
-msgstr "Izbor paketa"
+msgid ""
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
+msgstr ""
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Save on floppy"
-msgstr "Spasi na disketu"
+msgid "Second floppy drive"
+msgstr "Druga disketna jedinica"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Load from floppy"
-msgstr "Učitaj sa diskete"
+msgid "About Harddrake"
+msgstr "O Harddrake-u"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Molimo izaberite učitaj ili spasi izbor paketa na disketu.\n"
-"Format je isti kao i diskete koje generiĆĄe auto_install."
+msgid "Drive capacity"
+msgstr "Kapacitet uređaja"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
msgstr ""
-"Vaơ sistem nema dovoljno preostalog prostora za instalaciju ili unaprjeđenje "
-"(%d > %d)"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Looking for available packages..."
-msgstr "TraĆŸim dostupne pakete..."
+"Ubacite disketu u jedinicu\n"
+"Svi podaci na toj disketi će biti izgubljeni"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Pronalazim pakete za unaprjeđenje..."
+msgid "Size: %s"
+msgstr "Veličina: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Looking at packages already installed..."
-msgstr "TraĆŸim već instalirane pakete..."
+msgid "Control and Shift keys simultaneously"
+msgstr "Control i Shift tipka istovremeno"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "TraĆŸim dostupne pakete i izgrađujem rpm bazu podataka..."
+msgid "secondary"
+msgstr "sekundarni"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr ""
-"Nemam dovoljno swap prostora da dovrĆĄim instalaciju, molimo dodajte joĆĄ"
+msgid "View Backup Configuration."
+msgstr "Pogledaj postavke backupa."
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
-msgstr ""
-"Nisam uspio provjeriti datotečni sistem %s. Ćœelite li popraviti greĆĄke? "
-"(paĆŸnja, moĆŸete izgubiti podatke)"
+msgid "if set to yes, report check result to syslog."
+msgstr "ako je postavljeno na da, prijavljuje rezultate provjere u syslog."
-#: ../../install_steps_interactive.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Check bad blocks?"
-msgstr "Provjeri loĆĄe blokove?"
+msgid "No password"
+msgstr "Bez ĆĄifre"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Izaberite particije koje ĆŸelite formatirati"
+msgid "Nigeria"
+msgstr "Nigerija"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Moraćete rebootati da bi izmjene tabele particija stupile na snagu"
+msgid "There is no existing partition to use"
+msgstr "Nema nijedne postojeće particije za upotrebu"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
msgstr ""
-"Nema dovoljno slobodnog prostora za 1 MB bootstrap! Instalacija će "
-"nastaviti, ali da biste bootali vaĆĄ sistem, morate kreirati bootstrap "
-"particiju u DiskDrake-u"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Choose the mount points"
-msgstr "Izaberite tačke montiranja"
+"Sljedeći skeneri\n"
+"\n"
+"%s\n"
+"su dostupni na vaĆĄem sistemu.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "PretraĆŸujem particije da nađem tačke montiranja"
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
+msgstr ""
+"Da biste ơtampali na TCP ili socket ơtampač, morate dati hostname ili IP "
+"adresu ơtampača i opcionalno broj porta (podrazumjeva se 9100). Na HP "
+"JetDirect serverima broj porta je obično 9100, na ostalim serverima on moĆŸe "
+"varirati. Pogledajte priručnik vaơeg hardware-a."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No partition available"
-msgstr "Nema dostupnih particija"
+msgid "Hard drive information"
+msgstr "Informacije o hard disku"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configuring IDE"
-msgstr "PodeĆĄavam IDE"
+msgid "Russian"
+msgstr "Ruska"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "IDE"
-msgstr "IDE"
+msgid "Jordan"
+msgstr "Jordan"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "PodeĆĄavam PCMCIA kartice..."
+msgid "Hide files"
+msgstr "Sakrij datoteke"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid "Auto-detect printers connected to this machine"
+msgstr "Automatski prepoznaj ơtampače spojene na ovaj računar"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Button 3 Emulation"
-msgstr "Emulacija 3 dugmeta"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgstr ""
+"XawTV nije instaliran!\n"
+"\n"
+"\n"
+"Ako imate TV karticu ali je DrakX nije prepoznao (ni bttv ni saa7134 modul "
+"se ne\n"
+"nalaze u \"/etc/modules\") niti je instalirao XawTV, molim poĆĄaljite "
+"rezultate naredbe\n"
+"\"lspcidrake -v -f\" na \"install\\@mandrakesoft.com\" sa naslovom "
+"\"undetected\n"
+"TV card\".\n"
+"\n"
+"\n"
+"MoĆŸete instalirati XawTV kucajući \"urpmi xawtv\" na konzoli kao root."
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Button 2 Emulation"
-msgstr "Emulacija 2 dugmeta"
+msgid "Sorry, no floppy drive available"
+msgstr "Ćœao mi je, nema disketne jedinice"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Buttons emulation"
-msgstr "Emulacija dugmeta"
+msgid "Bolivia"
+msgstr "Bolivija"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Molimo izaberite na kojem serijskom portu je spojen vaĆĄ miĆĄ."
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
+"Podesite vaơ Windows server tako da je ơtampač dostupan putem IPP protokola "
+"i podesite ơtampanje sa ove maơine koristeći \"%s\" tip konekcije u "
+"Printerdrake-u.\n"
+"\n"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Mouse Port"
-msgstr "Port miĆĄa"
+msgid "Bad package"
+msgstr "Neispravan paket"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Please choose your type of mouse."
-msgstr "Molimo izaberite vrstu vaĆĄeg miĆĄa."
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
+"Pretvorite vaơ računar u moćan Linux server: Web server, email, firewall, "
+"file i print server (itd.) su udaljeni samo nekoliko klikova miĆĄem!"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Encryption key for %s"
-msgstr "Ključ enkripcije za %s"
+msgid "DrakSec Basic Options"
+msgstr "DrakSec osnovne opcije"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Upgrade %s"
-msgstr "Unaprijedi %s"
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program. Just type \"sndconfig\" in a console."
+msgstr ""
+"\n"
+"\n"
+"\n"
+"Napomena: ako imate ISA PnP zvučnu karticu, moraćete koristiti sndconfig "
+"program. Samo ukucajte \"sndconfig\" na konzoli."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Da li je ovo instalacija ili unaprjeđenje?"
+msgid "Romania"
+msgstr "Rumunija"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Install/Upgrade"
-msgstr "Instaliraj/Unaprijedi"
+msgid "choose device"
+msgstr "izaberite uređaj"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "Ovdje je puna lista svih dostupnih tastatura"
+msgid "Canada"
+msgstr "Kanada"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Molimo izaberite izgled vaĆĄe tastature."
+msgid "Remove from LVM"
+msgstr "Ukloni sa LVMa"
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Quit"
-msgstr "Izlaz"
+msgid "Timezone"
+msgstr "Vremenska zona"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "License agreement"
-msgstr "Licencni ugovor"
+msgid "German"
+msgstr "Njemačka"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "An error occurred"
-msgstr "DoĆĄlo je do greĆĄke"
+msgid "Next ->"
+msgstr "Dalje ->"
-#: ../../install_steps_newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
msgstr ""
-" <Tab>/<Alt-Tab> između elemenata | <Space> vrơi izbor | <F12> idući ekran "
+"Ako ovo uključite, moći ćete ơtampati obične tekstualne datoteke na "
+"japanskom jeziku. Koristite ovu funkciju samo ako zaista ĆŸelite ĆĄtampati "
+"japanski tekst, jer kada je aktivirana, viĆĄe ne moĆŸete ĆĄtampati znakove sa "
+"akcentima u latiničnim fontovima (npr. naơa slova). Takođe nećete moći "
+"prilagoditi margine, veličine znakova, itd. Ova postavka će utjecati samo na "
+"ĆĄtampače koji su definisani na ovom računaru. Ako ĆŸelite ĆĄtampati japanski "
+"tekst na udaljenom računaru, trebate aktivirati ovu funkciju na tom računaru."
-#: ../../install_steps_newt.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux instalacija %s"
+msgid ""
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
+msgstr ""
+"\n"
+"Postoji mogućnost da je ova\n"
+"particija Driver particija. Vjerovatno\n"
+"biste je trebali ostaviti na miru.\n"
-#: ../../install_steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No floppy drive available"
-msgstr "Nema pogodne disketne jedinice"
+msgid "Guinea-Bissau"
+msgstr "Gvineja Bisau"
-#: ../../install_steps.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Welcome to %s"
-msgstr "Dobro doĆĄli u %s"
+msgid "Horizontal refresh rate"
+msgstr "Brzina horizontalnog osvjeĆŸavanja"
-#: ../../install_steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
msgstr ""
-"Neki bitni paketi nisu ispravno instalirani.\n"
-"Ili je neispravan vaơ cdrom uređaj ili vaơ cdrom medij.\n"
-"Provjerite cdrom na instaliranom računaru koristeći \"rpm -qpl Mandrake/RPMS/"
-"*.rpm\"\n"
-
-#: ../../install_steps.pm:1
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Dvostruka tačka montiranja %s"
+"Ne mogu izmjeniti tačku montiranja jer se ova particija koristi za "
+"loopback.\n"
+"Najprije uklonite loopback"
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
msgstr ""
-"DoĆĄlo je do greĆĄke, ali ne znam kako da je rijeĆĄim fino.\n"
-"Nastavite na vlastiti rizik."
-
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Please wait"
-msgstr "Molimo sačekajte"
-
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
-#, c-format
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
-#, c-format
-msgid "Finish"
-msgstr "Kraj"
-
-#: ../../interactive.pm:1 ../../standalone/draksec:1
-#, c-format
-msgid "Basic"
-msgstr "Osnovno"
+"PodeĆĄavanje mreĆŸe koje je napravljeno tokom instalacije sada ne moĆŸe biti "
+"pokrenuto. Molim provjerite da li će mreĆŸa postati dostupna nakon bootanja "
+"sistema i popravite podeơenja koristeći Mandrake Kontrolni centar, sekcija "
+"\"MreĆŸa i Internet\"/\"Konekcija\", a zatim podesite ĆĄtampač, ponovo "
+"koristeći Mandrake Kontrolni centar, sekcija \"Hardver\"/\"Ơtampač\""
-#: ../../interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Advanced"
-msgstr "Napredno"
+msgid "USB controllers"
+msgstr "USB kontroleri"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Remove"
-msgstr "PobriĆĄi"
+msgid "What norm is your TV using?"
+msgstr "Koji standard koristi vaĆĄ TV?"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Modify"
-msgstr "Izmijeni"
+msgid "Type:"
+msgstr "Tip:"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Add"
-msgstr "Dodaj"
+msgid "Share name"
+msgstr "Share naziv"
-#: ../../interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Choose a file"
-msgstr "Izaberi datoteku"
+msgid "enable"
+msgstr "uključi"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
msgstr ""
-"Ovdje moĆŸete izabrati tipku ili kombinaciju tipki koja će\n"
-"izvrơiti prebacivanje između raznih rasporeda tastature\n"
-"(npr: latinični i ne-latinični)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "Desna \"Windows\" tipka"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Left \"Windows\" key"
-msgstr "Lijeva \"Windows\" tipka"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "\"Menu\" key"
-msgstr "\"Meni\" tipka"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt i Shift tipke istovremeno"
+"Kontaktiram Mandrake Linux web stranicu da bih saznao listu dostupnih "
+"mirrora..."
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl i Alt tipke istovremeno"
+msgid ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
+msgstr ""
+"DoĆĄlo je do problema prilikom restartovanja mreĆŸe:\n"
+"\n"
+"%s"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "CapsLock key"
-msgstr "CapsLock tipka"
+msgid "Remove the loopback file?"
+msgstr "Ukloniti loopback datoteku?"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Control i Shift tipka istovremeno"
+msgid "Selected size is larger than available space"
+msgstr "Izabrana veličina je veća od slobodnog prostora"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "Obje Shift tipke istovremeno"
+msgid "NCP server name missing!"
+msgstr "NCP naziv servera nedostaje!"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Right Alt key"
-msgstr "Desna Alt tipka"
+msgid "Please choose your country."
+msgstr "Molim izaberite vaĆĄu zemlju."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslavenska (latinično)"
+msgid "Hard Disk Backup files..."
+msgstr "Datoteke backup-a hard diska..."
#: ../../keyboard.pm:1
#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vijetnamska \"red brojeva\" QWERTY"
+msgid "Laotian"
+msgstr "Laoska"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "US keyboard (international)"
-msgstr "US tastatura (međunarodna)"
+msgid "Samoa"
+msgstr "Samoa"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "US keyboard"
-msgstr "US tastatura"
+msgid ""
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
+msgstr ""
+"Rstat protokol omogućava korisnicima na mreĆŸi da dobave\n"
+"mjeru performansi za svaki računar na toj mreĆŸi"
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "UK keyboard"
-msgstr "UK tastatura"
+msgid "Re-generating list of configured scanners ..."
+msgstr "Regeneriram listu podeĆĄenih skenera ..."
-#: ../../keyboard.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Ukrainian"
-msgstr "Ukrajinska"
+msgid "Scanner"
+msgstr "Skener"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turska (moderni \"Q\" model)"
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr "Upozorenje: testiranje ove grafičke karte moĆŸe zalediti računar"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turska (tradicionalni \"F\" model)"
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr "Korisničko ime smije sadrĆŸati samo mala slova, brojeve, `-' i `_'"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Tajik keyboard"
-msgstr "TadĆŸička tastatura"
+msgid "Menudrake"
+msgstr "Menudrake"
-#: ../../keyboard.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Thai keyboard"
-msgstr "Tajlandska tastatura"
+msgid "Welcome To Crackers"
+msgstr "DobrodoĆĄli u Crackers"
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "Tamilska (pisaća maơina)"
+msgid "Module options:"
+msgstr "Opcije modula"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr "Tamilska (ISCII)"
+msgid "Secure your networks with the Multi Network Firewall"
+msgstr "ZaĆĄtitite vaĆĄu mreĆŸu uz Multi Network Firewall"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Serbian (cyrillic)"
-msgstr "Srpska (ćirilica)"
+msgid "Go on without configuring the network"
+msgstr "Nastavi bez podeĆĄavanja mreĆŸe"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Slovačka (QWERTY)"
+msgid "Abort"
+msgstr "Prekid"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovačka (QWERTZ)"
+msgid "No password prompt on %s at port %s"
+msgstr "Nema upita za ĆĄifru na %s na portu %s"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Slovenian"
-msgstr "Slovenačka"
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "Molim uključite ako ĆŸelite koristiti non-rewinding uređaj."
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Swedish"
-msgstr "Ć vedska"
+msgid "Usage of remote scanners"
+msgstr "Upotreba udaljenih skenera"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Russian (Yawerty)"
-msgstr "Ruska (Yawerty)"
+msgid "\t-CDROM.\n"
+msgstr "\t-CDROM.\n"
-#: ../../keyboard.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Russian"
-msgstr "Ruska"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
+msgstr ""
+"VaĆĄa Windows particija je previĆĄe fragmentirana. Molim restartujte vaĆĄ "
+"računar pod Windows-om, pokrenite ``defrag'' alat, zatim pokrenite Mandrake "
+"Linux instalaciju."
#: ../../keyboard.pm:1
#, c-format
-msgid "Romanian (qwerty)"
-msgstr "Rumunska (qwerty)"
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak (NorveĆĄka)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Romanian (qwertz)"
-msgstr "Rumunska (qwertz)"
+msgid "Hard Disk Backup Progress..."
+msgstr "Napredak backup-a hard diska..."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Canadian (Quebec)"
-msgstr "Kanadska (Kvebek)"
+msgid "Unable to fork: %s"
+msgstr "Ne mogu izvrsiti fork: %s"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Portuguese"
-msgstr "Portugalska"
+msgid "Type: "
+msgstr "Tip: "
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Poljska (qwertz)"
+msgid "<-- Edit Client"
+msgstr "<-- Izmijeni klijent"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Poljska (qwerty)"
+msgid "no fonts found"
+msgstr "nije pronađen nijedan font"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Norwegian"
-msgstr "NorveĆĄka"
+msgid "Mouse"
+msgstr "MiĆĄ"
-#: ../../keyboard.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Dutch"
-msgstr "Holandska"
+msgid "not enough room in /boot"
+msgstr "nema dovoljno prostora u /boot"
-#: ../../keyboard.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Maltese (US)"
-msgstr "MalteĆĄka (US)"
+msgid "Choosing an arbitratry driver"
+msgstr "Slobodan izbor drajvera"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Maltese (UK)"
-msgstr "MalteĆĄka (UK)"
+msgid "Host name"
+msgstr "Host name"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Mongolska (ćirilica)"
+msgid "Liechtenstein"
+msgstr "LihtenĆĄtajn"
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Myanmar (Burmese)"
-msgstr "Mjanmarska (Burmanska)"
+msgid "the color of the progress bar"
+msgstr "boja progresne trake"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Macedonian"
-msgstr "Makedonska"
+msgid "Suppress Fonts Files"
+msgstr "Onemogući datoteke fontova"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Malayalam"
-msgstr "Malayalam"
+msgid "Add to RAID"
+msgstr "Dodaj na RAID"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Latvian"
-msgstr "Latvijska"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
+"or a variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litvanska \"fonetska\" QWERTY"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr "Ơtampač \"%s\" je uspjeơno dodan u Star Office/OpenOffice.org/GIMP."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litvanska \"red brojeva\" QWERTY"
+msgid "No floppy drive available!"
+msgstr "Nema pogodne disketne jedinice!"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litvanska AZERTY (nova)"
+msgid ""
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
+msgstr ""
+"Za listu opcija koje su dostupne za trenutni ơtampač ili pročitajte listu "
+"koja je data ispod ili kliknite na dugme \"Lista opcija za ĆĄtampu\".%s%s%s\n"
+"\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litvanska AZERTY (stara)"
+msgid "Continue anyway?"
+msgstr "Svejedno nastavljate?"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Laotian"
-msgstr "Laoska"
+msgid ""
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
+msgstr ""
+"Ako ơtampač nije naveden, izaberite kompatibilan (pogledajte uputstva za "
+"ơtampač) ili sličan."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Latin American"
-msgstr "Latino-Američka"
+msgid "Printer"
+msgstr "Ơtampač"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Korean keyboard"
-msgstr "Korejanska tastatura"
+msgid "Saudi Arabia"
+msgstr "Saudijska Arabija"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Japanese 106 keys"
-msgstr "Japanska 106 tipki"
+msgid "Internet"
+msgstr "Internet"
-#: ../../keyboard.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Inuktitut"
-msgstr "Inuktitut"
+msgid "Some devices were added:\n"
+msgstr "Dodani su neki uređaji:\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Italian"
-msgstr "Italijanska"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "Geometrija: %s cilindara, %s glava, %s sektora\n"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Icelandic"
-msgstr "Islandska"
+msgid "Printing on the printer \"%s\""
+msgstr "Ơtampam na ơtampač \"%s\""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Iranian"
-msgstr "Iranska"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr "/etc/hosts.allow i /etc/hosts.deny su već podeơeni - bez izmjene"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "Izraelska (fonetska)"
+msgid "Restore From Tape"
+msgstr "Vrati sa trake"
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Israeli"
-msgstr "Izraelska"
+msgid "Choose the profile to configure"
+msgstr "Izaberite profil za podeĆĄavanje"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Croatian"
-msgstr "Hrvatska"
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
+msgstr ""
+"\n"
+"\n"
+"Unesite Zeroconf ime računara bez tačaka ako ne ĆŸelite\n"
+"da koristite ponuđeno ime računara."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hungarian"
-msgstr "Mađarska"
+msgid "Backup Now from configuration file"
+msgstr "Backup-uj sada iz konfiguracijske datoteke"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Gurmukhi"
-msgstr "Gurmukhi"
+msgid "Mount points should contain only alphanumerical characters"
+msgstr "Tačka montiranja se treba sastojati samo od brojeva i slova"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Gujarati"
-msgstr "Gujarati"
+msgid "Restarting printing system..."
+msgstr "Restartujem sistem za ĆĄtampu ..."
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Greek"
-msgstr "Grčka"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
+msgstr ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gruzijska (\"latinični\" izgled)"
+msgid "See hardware info"
+msgstr "Pogledaj hardware info"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gruzijska (\"ruski\" izgled)"
+msgid "First sector of boot partition"
+msgstr "Prvi sektor boot particije"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "French"
-msgstr "Francuska"
+msgid "Printer manufacturer, model"
+msgstr "Proizvođač ơtampača, model"
-#: ../../keyboard.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Finnish"
-msgstr "Finska"
+msgid "PDQ - Print, Don't Queue"
+msgstr "PDQ - Print, Don't Queue"
-#: ../../keyboard.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Spanish"
-msgstr "Ć panska"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
+msgstr ""
+"[OPTIONS]...\n"
+"PodeĆĄavanje Mandrake Terminal Servera\n"
+"--enable : omogući MTS\n"
+"--disable : onemogući MTS\n"
+"--start : pokreni MTS\n"
+"--stop : zaustavi MTS\n"
+"--adduser : dodaj postojećeg sistemskog korisnika MTSu (potrebno je "
+"korisničko ime)\n"
+"--deluser : obriơi postojećeg sistemskog korisnika sa MTSa (potrebno "
+"je korisničko ime)\n"
+"--addclient : dodaj klijentski računar MTSu (potrebna je MAC adresa, "
+"IP, nbi image ime)\n"
+"--delclient : obriơi klijentski računar sa MTSa (potrebna je MAC "
+"adresa, IP, nbi image ime)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Estonian"
-msgstr "Estonska"
+msgid "Subnet Mask:"
+msgstr "Subnet mask:"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Ć vedska)"
+msgid "LiLo and Bootsplash themes installation successfull"
+msgstr "UspjeĆĄna instalacija LiLo i Boot tema"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (NorveĆĄka)"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"Dva kritična parametra su brzina vertikalnog osvjeĆŸenja, ĆĄto je brzina\n"
+"kojom se cijeli ekran osvjeĆŸava, i brzina horizontalne\n"
+"sinhronizacije, ĆĄto je brzina kojm se prikazuju skan-linije.\n"
+"\n"
+"VEOMA JE VAĆœNO da ne izaberete tip monitora čiji je sinhronizacioni\n"
+"raspon izvan mogućnosti vaĆĄeg monitora: time moĆŸete oĆĄtetiti monitor.\n"
+" Ako niste sigurni, izaberite najmanju opciju."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
+msgid "Modify"
+msgstr "Izmijeni"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Danish"
-msgstr "Danska"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
+"\n"
+"Komande \"%s\" i \"%s\" također omogućavaju izmjenu opcija za pojedinačni "
+"zadatak ĆĄtampe. Jednostavno dodajte ĆŸeljena podeĆĄenja na komandnu liniju, "
+"npr. \"%s <datoteka>\".\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Devanagari"
-msgstr "Devanagari"
+msgid "Need hostname, username and password!"
+msgstr "Potrebno ime računara, korisničko ime i ơifra!"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "German (no dead keys)"
-msgstr "Njemačka (bez mrtvih tipki)"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
+"WebDAV je protokol koji vam omogućuje da direktorij web servera\n"
+"montirate lokalno i da ga tretirate kao lokalni direktorij (pod uslovom da\n"
+"je web server podeĆĄen kao WebDAV server). Ako ĆŸelite dodati WebDAV\n"
+"tačke montiranja, izaberite \"Novi\"."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "German"
-msgstr "Njemačka"
+msgid "HardDrake"
+msgstr "HardDrake"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Czech (QWERTY)"
-msgstr "Čeơka (QWERTY)"
+msgid "new"
+msgstr "novi"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Czech (QWERTZ)"
-msgstr "Čeơka (QWERTZ)"
+msgid "Would you like to try again?"
+msgstr "Ćœelite li ponovo pokuĆĄati?"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Swiss (French layout)"
-msgstr "Ć vicarska (francuski izgled)"
+msgid "Wizard"
+msgstr "Čarobnjak"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Swiss (German layout)"
-msgstr "Ơvicarska (njemački izgled)"
+msgid "Edit selected server"
+msgstr "Izmijeni izabrani server"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belarusian"
-msgstr "Bjeloruska"
+msgid "Please choose where you want to backup"
+msgstr "Molimo izaberite gdje ĆŸelite backupovati"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bosnian"
-msgstr "Bosanska"
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr "Moraćete rebootati da bi izmjene tabele particija stupile na snagu"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazilska (ABNT-2)"
+msgid "Do not include the browser cache"
+msgstr "Ne uključuj spremnik web preglednika"
-#: ../../keyboard.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Bulgarian (BDS)"
-msgstr "Bugarska (BDS)"
+msgid "Please, choose your keyboard layout."
+msgstr "Molimo izaberite izgled vaĆĄe tastature."
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "Bugarska (fonetska)"
+msgid "Standard"
+msgstr "Standard"
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Bengali"
-msgstr "Bengalska"
+msgid "Please choose your mouse type."
+msgstr "Molimo izaberite vrstu vaĆĄeg miĆĄa."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Belgian"
-msgstr "Belgijska"
+msgid "Connect..."
+msgstr "Konektuj se..."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "AzerbejdĆŸanska (latinica)"
+msgid "Failed to configure printer \"%s\"!"
+msgstr "Nisam uspio podesiti ơtampač \"%s\"!"
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Arabic"
-msgstr "Arapska"
+msgid "not configured"
+msgstr "nije podeĆĄeno"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Armenian (phonetic)"
-msgstr "Armenska (fonetska)"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Armenian (typewriter)"
-msgstr "Armenska (pisaća maơina)"
+msgid "About"
+msgstr "O programu"
-#: ../../keyboard.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Armenian (old)"
-msgstr "Armenska (stara)"
+msgid "Proxies configuration"
+msgstr "Konfiguracija proxija"
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Albanian"
-msgstr "Albanska"
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Polish"
-msgstr "Poljska"
+msgid "Start: sector %s\n"
+msgstr "Početak: sector %s\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Dvorak"
-msgstr "Dvorak"
+msgid "Network interface already configured"
+msgstr "MreĆŸni interfejs je već podeĆĄen"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Zimbabwe"
-msgstr "Zimbabve"
+msgid "Couldn't access the floppy!"
+msgstr "Ne mogu pristupiti disketi!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Zambia"
-msgstr "Zambija"
+msgid "connecting to Bugzilla wizard ..."
+msgstr "spajam se na Bugzilla čarobnjak..."
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "South Africa"
-msgstr "JuĆŸna Afrika"
+msgid "Mail Server"
+msgstr "Mail server"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Serbia"
-msgstr "Srbija"
+msgid "Please click on a partition"
+msgstr "Molimo kliknite na particiju"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Mayotte"
-msgstr "Mayotte"
+msgid "Linux"
+msgstr "Linux"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Yemen"
-msgstr "Jemen"
+msgid "Have a nice day!"
+msgstr "Have a nice day!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Samoa"
-msgstr "Samoa"
+msgid "across Network"
+msgstr "preko mreĆŸe"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Wallis and Futuna"
-msgstr "Wallis i Futuna"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Vanuatu"
-msgstr "Vanuatu"
+msgid "Upgrade %s"
+msgstr "Unaprijedi %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Vietnam"
-msgstr "Vijetnam"
+msgid "Select Printer Connection"
+msgstr "Izaberi konekciju ơtampača"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Djevičanska ostrva (SAD)"
+msgid "Scanning for TV channels in progress ..."
+msgstr "Pretraga TV kanala je u toku ..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Virgin Islands (British)"
-msgstr "Djevičanska ostrva (Britanska)"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
+"GreĆĄka tokom slanja datoteke preko FTPa.\n"
+" Molimo ispravite vaĆĄu FTP konfiguraciju."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Venezuela"
-msgstr "Venecuela"
+msgid "IP Range Start:"
+msgstr "Početak IP raspona:"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "Saint Vincent and the Grenadines"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"Internet superserver (obično nazvan inetd) pokreće razne druge Internet\n"
+"servise po potrebi. Odgovoran je za pokretanje mnogih servisa, kao ĆĄto su\n"
+"telnet, ftp, rsh i rlogin. Isključivanje inetd-a isključuje sve servise za "
+"koje je\n"
+"on nadleĆŸan."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Vatican"
-msgstr "Vatikan"
+msgid "the height of the progress bar"
+msgstr "visina progresne trake"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Uzbekistan"
-msgstr "Uzbekistan"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
+"\n"
+"- Spasi pomoću %s na računaru: %s\n"
-#: ../../lang.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Uruguay"
-msgstr "Urugvaj"
+msgid "Argentina"
+msgstr "Argentina"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "United States Minor Outlying Islands"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
-#: ../../lang.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Uganda"
-msgstr "Uganda"
+msgid "Domain Name Server"
+msgstr "DNS server"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Ukraine"
-msgstr "Ukrajina"
+msgid "Security Level:"
+msgstr "Nivo sigurnosti:"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Tanzania"
-msgstr "Tanzanija"
+msgid "Mount points must begin with a leading /"
+msgstr "Tačke montiranja moraju počinjati sa /"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Taiwan"
-msgstr "Tajvan"
+msgid "Postfix Mail Server"
+msgstr "Postfix mail server"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Tuvalu"
-msgstr "Tuvalu"
+msgid "Quit without saving"
+msgstr "Izlaz bez spaĆĄavanja"
#: ../../lang.pm:1
#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Trinidad i Tobago"
+msgid "Yemen"
+msgstr "Jemen"
-#: ../../lang.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Turkey"
-msgstr "Turska"
+msgid "This product is available on the MandrakeStore Web site."
+msgstr ""
+"Ovaj proizvod je dostupan na web stranici MandrakeStore (Mandrake "
+"prodavnica)."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Tonga"
-msgstr "Tonga"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr ""
+"Molim unesite maksimalnu veličinu\n"
+" dozvoljenu za Draxbackup"
-#: ../../lang.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Tunisia"
-msgstr "Tunis"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr "=> Postoji mnogo stvari od kojih moĆŸete izabrati (%s).\n"
-#: ../../lang.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Turkmenistan"
-msgstr "Turkmenistan"
+msgid "Hard drive detection"
+msgstr "Prepoznavanje hard diska"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "East Timor"
-msgstr "Istočni Timor"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
+"Niste izabrali nijednu grupu paketa\n"
+"Molimo izaberite minimalnu instalaciju koju ĆŸelite:"
-#: ../../lang.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Tokelau"
-msgstr "Tokelau"
+msgid "Please enter the WebDAV server URL"
+msgstr "Molim unesite URL WebDAV servera"
#: ../../lang.pm:1
#, c-format
msgid "Tajikistan"
msgstr "TadĆŸikistan"
-#: ../../lang.pm:1
-#, c-format
-msgid "Thailand"
-msgstr "Tajland"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Togo"
-msgstr "Togo"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "French Southern Territories"
-msgstr "Francuske JuĆŸne Teritorije"
-
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Chad"
-msgstr "Čad"
+msgid "Accept"
+msgstr "Prihvati"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "Turks i Caicos ostrva"
+msgid "Description"
+msgstr "Opis"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Swaziland"
-msgstr "Svazilend"
+msgid "Error opening %s for writing: %s"
+msgstr "GreĆĄka u otvaranju %s za pisanje: %s"
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Syria"
-msgstr "Sirija"
+msgid "Mouse type: %s\n"
+msgstr "Vrsta miĆĄa: %s\n"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "El Salvador"
-msgstr "El Salvador"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr "VaĆĄa kartica moĆŸe imati podrĆĄku za 3D hardversko ubrzanje sa XFree %s."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sao Tome and Principe"
-msgstr "Sao Tome i Principe"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "Molimo izaberite veličinu vaơeg CD/DVD medija (Mb)"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Suriname"
-msgstr "Surinam"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Somalia"
-msgstr "Somalija"
+msgid "Expert Area"
+msgstr "Ekspert područje"
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Senegal"
-msgstr "Senegal"
+msgid "Choose a monitor"
+msgstr "Izaberite monitor"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "San Marino"
-msgstr "San Marino"
+msgid "Empty label not allowed"
+msgstr "Prazna oznaka nije dozvoljena"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Sierra Leone"
-msgstr "Sierra Leone"
+msgid "Maltese (UK)"
+msgstr "MalteĆĄka (UK)"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Slovakia"
-msgstr "Slovačka"
+msgid "I can't add any more partition"
+msgstr "Ne mogu dodati viĆĄe particija"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Svalbard and Jan Mayen ostrva"
+msgid "Size in MB: "
+msgstr "Veličina u MB: "
-#: ../../lang.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Slovenia"
-msgstr "Slovenija"
+msgid "Remote printer"
+msgstr "Udaljeni ơtampač"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Saint Helena"
-msgstr "Saint Helena"
+msgid "Please choose a language to use."
+msgstr "Molimo izaberite jezik koji ćete koristiti."
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Singapore"
-msgstr "Singapur"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
+"UPOZORENJE: Ovaj uređaj je prethodno podeơen za konekciju na Internet.\n"
+"Samo prihvatite kako bi ovaj uređaj ostao podeơen.\n"
+"Izmjena polja ispod će prepisati ovu konfiguraciju."
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Sudan"
-msgstr "Sudan"
+msgid "I can set up your computer to automatically log on one user."
+msgstr "Mogu podesiti vaơ računar da automatski prijavi jednog korisnika."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Seychelles"
-msgstr "SejĆĄelska ostrva"
+msgid "Floppy format"
+msgstr "Format diskete"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Solomon Islands"
-msgstr "Solomonska ostrva"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Saudi Arabia"
-msgstr "Saudijska Arabija"
+msgid "Generic Printers"
+msgstr "Razni ơtampači"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Rwanda"
-msgstr "Ruanda"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
+msgstr ""
+"Molimo izaberite ĆĄtampač kojem ĆŸelite slati zadatke ĆĄtampe ili unesite naziv "
+"uređaja / naziv datoteke na ulaznoj liniji"
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Russia"
-msgstr "Rusija"
+msgid "The scanners on this machine are available to other computers"
+msgstr "Skeneri na ovom računari su dostupni drugim računarima"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Romania"
-msgstr "Rumunija"
+msgid "First sector of the root partition"
+msgstr "Prvi sektor root particije"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Reunion"
-msgstr "Reunion"
+msgid "Alternative drivers"
+msgstr "Alternativni drajveri"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Qatar"
-msgstr "Katar"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
+"\n"
+"Molimo uključite sve potrebne opcije.\n"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Palau"
-msgstr "Palau"
+msgid "Initrd"
+msgstr "Initrd"
#: ../../lang.pm:1
#, c-format
-msgid "Paraguay"
-msgstr "Paragvaj"
+msgid "Cape Verde"
+msgstr "Zelenortska ostrva"
-#: ../../lang.pm:1
-#, c-format
-msgid "Portugal"
-msgstr "Portugal"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr "Da li ovaj CPU ima Cyrix 6x86 Coma bug"
-#: ../../lang.pm:1
-#, c-format
-msgid "Palestine"
-msgstr "Palestina"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr ""
+"Rani Pentium procesori imaju bug koji izaziva smrzavanje sistema prilikom "
+"dekodiranja F00F bytecode-a"
#: ../../lang.pm:1
#, c-format
-msgid "Puerto Rico"
-msgstr "Portoriko"
+msgid "Guam"
+msgstr "Guam"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pitcairn"
-msgstr "Pitcairn"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
+msgstr ""
+"Molimo izaberite port na koji je vaơ ơtampač povezan ili unesite naziv "
+"uređaja / naziv datoteke na ulaznoj liniji"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "Saint Pierre and Miquelon"
+msgid "/Options/Test"
+msgstr "/Opcije/Test"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Poland"
-msgstr "Poljska"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+"Ovaj nivo treba koristiti paĆŸljivo. On čini vaĆĄ sistem lakĆĄim za upotrebu,\n"
+"ali vrlo osjetljivim: ne smije biti koriơten za računar koji je spojen na\n"
+"druge ili na Internet. Nema pristupa ĆĄifrom."
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Pakistan"
-msgstr "Pakistan"
+msgid "Mounting partition %s"
+msgstr "Montiram particiju %s"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Philippines"
-msgstr "Filipini"
+msgid "User name"
+msgstr "Korisničko ime"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Papua New Guinea"
-msgstr "Papua Nova Gvineja"
+msgid "New configuration (isdn-light)"
+msgstr "Nova konfiguracija (isdn-light)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "French Polynesia"
-msgstr "Francuska Polinezija"
+msgid "Userdrake"
+msgstr "Userdrake"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Peru"
-msgstr "Peru"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "Koju particiju ĆŸelite koristiti za Linux4Win?"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Panama"
-msgstr "Panama"
+msgid "Backup system"
+msgstr "Backup sistema"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Oman"
-msgstr "Oman"
+msgid "Test pages"
+msgstr "Testna stranica"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "New Zealand"
-msgstr "Novi Zeland"
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
+"Lista podataka za vraćanje:\n"
+"\n"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Niue"
-msgstr "Niue"
+msgid "Checking %s"
+msgstr "Provjeravam %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Nauru"
-msgstr "Nauru"
+msgid "TCP/Socket Printer Options"
+msgstr "TCP/socket opcije ơtampača"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Nepal"
-msgstr "Nepal"
+msgid "Card mem (DMA)"
+msgstr "Memorija kartice (DMA)"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Nicaragua"
-msgstr "Nikaragva"
+msgid "France"
+msgstr "Francuska"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Nigeria"
-msgstr "Nigerija"
+msgid "browse"
+msgstr "pregledaj"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Norfolk Island"
-msgstr "Norfolk ostrvo"
+msgid "Checking installed software..."
+msgstr "Provjeravam instalirani software..."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Niger"
-msgstr "Niger"
+msgid "Remote printer name missing!"
+msgstr "Ime udaljenog ơtampača nedostaje!"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New Caledonia"
-msgstr "Nova Kaledonija"
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "Da li ĆŸelite da omogućite ĆĄtampanje na ĆĄtampačima u lokalnoj mreĆŸi?\n"
#: ../../lang.pm:1
#, c-format
-msgid "Namibia"
-msgstr "Namibija"
+msgid "Turkey"
+msgstr "Turska"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Mozambique"
-msgstr "Mozambik"
+msgid "Alcatel speedtouch usb"
+msgstr "Alcatel speedtouch usb"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Malaysia"
-msgstr "Malezija"
+msgid "Number of buttons"
+msgstr "Broj dugmadi"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Mexico"
-msgstr "Meksiko"
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Vijetnamska \"red brojeva\" QWERTY"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Malawi"
-msgstr "Malavi"
+msgid "Module"
+msgstr "Modul"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Maldives"
-msgstr "Maldivi"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
+msgstr ""
+"Pored toga, redovi koji nisu kreirani ovim programom ili sa \"foomatic-"
+"configure\" ne mogu biti premjeĆĄteni."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mauritius"
-msgstr "Mauricijus"
+msgid "Hardware"
+msgstr "Hardware"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Malta"
-msgstr "Malta"
+msgid "Ctrl and Alt keys simultaneously"
+msgstr "Ctrl i Alt tipke istovremeno"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Montserrat"
-msgstr "Montserrat"
+msgid "United States"
+msgstr "SAD"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mauritania"
-msgstr "Mauritanija"
+msgid "Default OS?"
+msgstr "Podrazumjevani OS?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Martinique"
-msgstr "Martinik"
+msgid "Swiss (German layout)"
+msgstr "Ơvicarska (njemački izgled)"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Northern Mariana Islands"
-msgstr "Sjeverna Marijanska ostrva"
+msgid "Configure all heads independently"
+msgstr "KonfiguriĆĄi sve glave odvojeno"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mongolia"
-msgstr "Mongolija"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr ""
+"Molim odaberite ĆĄtampač koji ĆŸelite podesiti. PodeĆĄavanje ĆĄtampača će raditi "
+"potpuno automatski. Ako vaĆĄ ĆĄtampač nije ispravno prepoznat ili ako ĆŸelite "
+"sami podesiti ơtampač, uključite \"Ručno podeơavanje\"."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Myanmar"
-msgstr "Myanmar"
+msgid "NTP Server"
+msgstr "NTP server"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Mali"
-msgstr "Mali"
+msgid "Load/Save on floppy"
+msgstr "Učitaj/snimi na disketu"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Macedonia"
-msgstr "Makedonija"
+msgid "This theme does not yet have a bootsplash in %s !"
+msgstr "Ova tema joĆĄ nema bootsplash u %s !"
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Marshall Islands"
-msgstr "MarĆĄalova ostrva"
+msgid "nice"
+msgstr "fino"
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Madagascar"
-msgstr "Madagaskar"
+msgid "Leaving in %d seconds"
+msgstr "NapuĆĄtam za %d sekundi"
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Moldova"
-msgstr "Moldova"
+msgid "Please choose which serial port your modem is connected to."
+msgstr "Molimo izaberite na koji serijski port je nakačen vaơ modem."
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Monaco"
-msgstr "Monako"
+msgid "Country"
+msgstr "Zemlja"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Morocco"
-msgstr "Maroko"
+msgid "Property"
+msgstr "Osobina"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Libya"
-msgstr "Libija"
+msgid "Ghostscript"
+msgstr "Ghostscript"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Latvia"
-msgstr "Latvija"
+msgid "LAN Configuration"
+msgstr "PodeĆĄavanje LANa"
#: ../../lang.pm:1
#, c-format
-msgid "Luxembourg"
-msgstr "Luksemburg"
+msgid "Ghana"
+msgstr "Gana"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lithuania"
-msgstr "Litvanija"
+msgid "Path or Module required"
+msgstr "Potrebna je staza ili modul"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Lesotho"
-msgstr "Lesoto"
+msgid "Advanced Options"
+msgstr "Napredne opcije"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Liberia"
-msgstr "Liberija"
+msgid "Coma bug"
+msgstr "Coma bug"
-#: ../../lang.pm:1
-#, c-format
-msgid "Sri Lanka"
-msgstr "Ć ri Lanka"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
+"At this point, you need to choose what partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have been already\n"
+"defined, either from a previous installation of GNU/Linux or from another\n"
+"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
+"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"Clear all\": this option deletes all partitions on the selected hard\n"
+"drive.\n"
+"\n"
+" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
+"and swap partitions in free space of your hard drive.\n"
+"\n"
+" * \"More\": gives access to additional features:\n"
+"\n"
+" * \"Save partition table\": saves the partition table to a floppy.\n"
+"Useful for later partition-table recovery if necessary. It is strongly\n"
+"recommended to perform this step.\n"
+"\n"
+" * \"Restore partition table\": allows to restore a previously saved\n"
+"partition table from floppy disk.\n"
+"\n"
+" * \"Rescue partition table\": if your partition table is damaged, you "
+"can\n"
+"try to recover it using this option. Please be careful and remember that it\n"
+"can fail.\n"
+"\n"
+" * \"Reload partition table\": discards all changes and load your "
+"initial\n"
+"partitions table.\n"
+"\n"
+" * \"removable media automounting\": unchecking this option will force "
+"users\n"
+"to manually mount and unmount removable medias such as floppies and\n"
+"CD-ROMs.\n"
+"\n"
+" * \"Wizard\": use this option if you wish to use a wizard to partition "
+"your\n"
+"hard drive. This is recommended if you do not have a good knowledge of\n"
+"partitioning.\n"
+"\n"
+" * \"Undo\": use this option to cancel your changes.\n"
+"\n"
+" * \"Toggle to normal/expert mode\": allows additional actions on "
+"partitions\n"
+"(Type, options, format) and gives more information.\n"
+"\n"
+" * \"Done\": when you have finished partitioning your hard drive, this will\n"
+"save your changes back to disc.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
+"\n"
+" * Ctrl-d to delete a partition;\n"
+"\n"
+" * Ctrl-m to set the mount point.\n"
+"\n"
+"To get information about the different filesystem types available, please\n"
+"read the chapter ext2fs from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
+"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
-#: ../../lang.pm:1
-#, c-format
-msgid "Liechtenstein"
-msgstr "LihtenĆĄtajn"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
+"Grafička kartica\n"
+"\n"
+" Instalacija sada moĆŸe normalno prepoznati i podesiti grafičku karticu\n"
+"koja je instalirana na vaĆĄem računaru. Ako se to ne desi, moĆŸete\n"
+"izabrati na ovoj listi karticu koju ustvari posjedujete.\n"
+"\n"
+" U slučaju da postoji viơe dostupnih servera za vaơu karticu, sa ili bez\n"
+"3D ubrzanja, biće vam predloĆŸen izbor servera koji najbolje odgovara\n"
+"vaĆĄim potrebama."
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Saint Lucia"
-msgstr "Saint Lucia"
+msgid "There was an error installing packages:"
+msgstr "DoĆĄlo je do greĆĄke kod instaliranja paketa:"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lebanon"
-msgstr "Liban"
+msgid "Lexmark inkjet configuration"
+msgstr "PodeĆĄavanje Lexmark inkjet-a"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Laos"
-msgstr "Laos"
+msgid "Undo"
+msgstr "PoniĆĄti"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Kazakhstan"
-msgstr "Kazahstan"
+msgid "Save partition table"
+msgstr "Snimi tabelu particija"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Cayman Islands"
-msgstr "Kajmanska ostrva"
+msgid "Finnish"
+msgstr "Finska"
#: ../../lang.pm:1
#, c-format
-msgid "Kuwait"
-msgstr "Kuvajt"
+msgid "Macedonia"
+msgstr "Makedonija"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Korea"
-msgstr "Koreja"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
+"Dijeljenje po-korisniku koristi grupu \"fileshare\". \n"
+"MoĆŸete dodavati korisnike u ovu grupu pomoću userdrake-a."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Korea (North)"
-msgstr "Koreja (Sjeverna)"
+msgid "Slovenian"
+msgstr "Slovenačka"
#: ../../lang.pm:1
#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "Saint Kitts and Nevis"
+msgid "Libya"
+msgstr "Libija"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Comoros"
-msgstr "Komori"
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr "Podeơavam skripte, instaliram software, pokrećem servere..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Kiribati"
-msgstr "Kiribati"
+msgid ""
+"\n"
+"- Burn to CD"
+msgstr ""
+"\n"
+"- PrĆŸi na CD"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Cambodia"
-msgstr "Kambođa"
+msgid "Table"
+msgstr "Tabela"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Kyrgyzstan"
-msgstr "Kirgistan"
+msgid "I don't know how to format %s in type %s"
+msgstr "Ne znam kako formatirati %s kao tip %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Kenya"
-msgstr "Kenija"
+msgid "Model"
+msgstr "Model"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Japan"
-msgstr "Japan"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Jordan"
-msgstr "Jordan"
+msgid "Stop Server"
+msgstr "Zaustavi server"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Jamaica"
-msgstr "Jamajka"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
+msgstr ""
+"\n"
+"Izaberite temu za\n"
+"lilo i boot ekran,\n"
+"moĆŸete ih odvojeno\n"
+"izabrati"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Iceland"
-msgstr "Island"
+msgid "Modem"
+msgstr "Modem"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Iran"
-msgstr "Iran"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
+msgstr ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
#: ../../lang.pm:1
#, c-format
-msgid "Iraq"
-msgstr "Irak"
+msgid "Tuvalu"
+msgstr "Tuvalu"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "Britansko-Indijska morska teritorija"
+msgid "Use auto detection"
+msgstr "Koristi auto prepoznavanje"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "India"
-msgstr "Indija"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr ""
+"GPM dodaje podrĆĄku za miĆĄa tekstualnim aplikacijama kao ĆĄto je\n"
+"Midnight Commander. On također omogućuje konzolne isjeci/umetni operacije\n"
+"pomoću miơa i uključuje podrơku za pop-up menije na konzoli."
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Israel"
-msgstr "Izrael"
+msgid "Started on boot"
+msgstr "Pokrenut na bootu"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Ireland"
-msgstr "Irska"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
+msgstr ""
+"PridruĆŸite se MandrakeSoftovom support teamu i Linux zajednici na Internetu, "
+"podijelite vaĆĄe znanje i pomozite drugima i tako postanite priznat Expert na "
+"naĆĄem online tech support sajtu:"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Indonesia"
-msgstr "Indonezija"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
+msgstr ""
+"MoĆŸete podesiti sljedeće opcije kako biste prilagodili\n"
+"sigurnost vaơeg sistema. Ako vam je potrebno objaơnjenje, pogledajte pomoć u "
+"tooltipu.\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hungary"
-msgstr "Mađarska"
+msgid "Automatically find available printers on remote machines"
+msgstr "Automatski pronađi dostupne ơtampače na udaljenim računarima"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Haiti"
-msgstr "Haiti"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
+"\n"
+"- Spasi na traku na uređaju: %s"
#: ../../lang.pm:1
#, c-format
-msgid "Croatia"
-msgstr "Hrvatska"
+msgid "East Timor"
+msgstr "Istočni Timor"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Honduras"
-msgstr "Honduras"
+msgid "Del profile..."
+msgstr "BriĆĄi profil..."
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Heard ostrvo i McDonaldova ostrva"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hong Kong"
-msgstr "Hong Kong"
+msgid "Installing Foomatic..."
+msgstr "Instaliram Foomatic..."
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "China"
-msgstr "Kina"
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "Molimo izvrĆĄite logout i zatim koristitite Ctrl-Alt-BackSpace"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Guyana"
-msgstr "Gvajana"
+msgid "detected"
+msgstr "detektovan"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Guinea-Bissau"
-msgstr "Gvineja Bisau"
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr "Potrebno je restartovati mreĆŸu. Ćœelite li je restartovati?"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Guam"
-msgstr "Guam"
+msgid "Package: "
+msgstr "Paket:"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Guatemala"
-msgstr "Gvatemala"
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr "Ne mogu pisati u /etc/sysconfig/bootsplash."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "South Georgia i South Sandwich ostrva"
+msgid "SECURITY WARNING!"
+msgstr "SIGURNOSNO UPOZORENJE!"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Equatorial Guinea"
-msgstr "Ekvatorijalna Gvineja"
+msgid "StarOffice"
+msgstr "StarOffice"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Guadeloupe"
-msgstr "Gvadalupe"
+msgid "No, I don't want autologin"
+msgstr "Ne, ne ĆŸelim da se autologiram"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Guinea"
-msgstr "Gvineja"
+msgid "Windows Migration tool"
+msgstr "Alat za Windows migraciju"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Gambia"
-msgstr "Gambija"
+msgid "All languages"
+msgstr "Svi jezici"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Greenland"
-msgstr "Grenland"
+msgid "Removing %s"
+msgstr "Uklanjam %s"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Gibraltar"
-msgstr "Gibraltar"
+msgid "Testing your connection..."
+msgstr "Probavam vaĆĄu konekciju..."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Ghana"
-msgstr "Gana"
+msgid "Cache size"
+msgstr "Veličina cache-a"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "French Guiana"
-msgstr "Francuska Gvajana"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
+msgstr ""
+"Ć ifra je sada aktivirana, ali koriĆĄtenje za mreĆŸni računar joĆĄ nije "
+"preporučeno."
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Georgia"
-msgstr "Gruzija"
+msgid "Start sector: "
+msgstr "Početni sektor: "
#: ../../lang.pm:1
#, c-format
-msgid "Grenada"
-msgstr "Grenada"
+msgid "Congo (Brazzaville)"
+msgstr "Kongo (Brazzaville)"
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "United Kingdom"
-msgstr "Ujedinjeno Kraljevstvo"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr "Paket %s treba biti instaliran. Da li ga ĆŸelite instalirati?"
#: ../../lang.pm:1
#, c-format
-msgid "Gabon"
-msgstr "Gabon"
+msgid "Seychelles"
+msgstr "SejĆĄelska ostrva"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Faroe Islands"
-msgstr "Farska ostrva"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
+msgstr ""
+"Printerdrake je uporedi ime modela koje je dobijeno od automatskog "
+"prepoznavanja ơtampača sa modelima koji su navedeni u njegovoj bazi podataka "
+"kako bi naĆĄao najbliĆŸi. Ovaj izbor moĆŸda nije tačan, pogotovo ako vaĆĄ "
+"ơtampač uopơte nije naveden u bazi. Stoga provjerite da li je izbor ispravan "
+"i ako je tako kliknite \"Model je ispravan\", u suprotnom kliknite "
+"\"Izaberite model ručno\" kako biste ručno izabrali vaơ model ơtampača na "
+"sljedećem ekranu.\n"
+"\n"
+"Za vaơ ơtampač Printerdrake je naơao:\n"
+"\n"
+"%s"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Micronesia"
-msgstr "Micronesia"
+msgid "Bad password on %s"
+msgstr "PogreĆĄna ĆĄifra na %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Falklandsko otočje"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
+msgstr ""
+"\n"
+"Na vaơ sistem je direktno spojen jedan nepoznat ơtampač"
#: ../../lang.pm:1
#, c-format
-msgid "Fiji"
-msgstr "FidĆŸi"
+msgid "Zambia"
+msgstr "Zambija"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Finland"
-msgstr "Finska"
+msgid "Security Administrator (login or email)"
+msgstr "Sigurnosni administrator (login ili email)"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Ethiopia"
-msgstr "Etiopija"
+msgid "Sorry, we support only 2.4 kernels."
+msgstr "Ćœalim, podrĆŸavamo samo 2.4 kernele."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Spain"
-msgstr "Ć panija"
+msgid "Romanian (qwerty)"
+msgstr "Rumunska (qwerty)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Eritrea"
-msgstr "Eritreja"
+msgid "Under Devel ... please wait."
+msgstr "U izradi ... molim sačekajte."
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Western Sahara"
-msgstr "Zapadna Sahara"
+msgid "Czech Republic"
+msgstr "Čeơka"
#: ../../lang.pm:1
#, c-format
msgid "Egypt"
msgstr "Egipat"
-#: ../../lang.pm:1
-#, c-format
-msgid "Estonia"
-msgstr "Estonija"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Ecuador"
-msgstr "Ekvador"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Algeria"
-msgstr "AlĆŸir"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Dominican Republic"
-msgstr "Dominikanska Republika"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Dominica"
-msgstr "Dominika"
-
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Denmark"
-msgstr "Danska"
+msgid "Old configuration (isdn4net)"
+msgstr "Stara konfiguracija (isdn4net)"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Djibouti"
-msgstr "DĆŸibuti"
+msgid "Sound card"
+msgstr "Zvučna kartica"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Cyprus"
-msgstr "Kipar"
+msgid "Import Fonts"
+msgstr "Uvoz fontova"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Christmas Island"
-msgstr "UskrĆĄnje ostrvo"
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+"Imate jednu veliku Microsoft Windows particiju.\n"
+"PredlaĆŸem da najprije promijenite veličinu te particije\n"
+"(kliknite na nju, zatim na \"Promijeni veličinu\")"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Cape Verde"
-msgstr "Zelenortska ostrva"
+msgid "Suppress Temporary Files"
+msgstr "Onemogući privremene datoteke"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cuba"
-msgstr "Kuba"
+msgid "Change partition type"
+msgstr "Izmjena tipa particije"
-#: ../../lang.pm:1
-#, c-format
-msgid "Colombia"
-msgstr "Kolumbija"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
+"Rezolucija\n"
+"\n"
+" MoĆŸete izabrati rezolucije i broj boja među vrijednostima koje su "
+"moguće\n"
+"na vaĆĄem hardveru. Izaberite one vrijednosti koje vam najbolje odgovaraju\n"
+"(moći ćete ih promijeniti nakon instalacije). Primjer izabrane konfiguracije "
+"je\n"
+"prikazan na monitoru."
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Cameroon"
-msgstr "Kamerun"
+msgid "Network Options"
+msgstr "MreĆŸne opcije"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Chile"
-msgstr "Čile"
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
+"Tema prikaza\n"
+"pod konzolom"
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Cook Islands"
-msgstr "Cook ostrva"
+msgid "Statistics"
+msgstr "Statistika"
-#: ../../lang.pm:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Cote d'Ivoire"
-msgstr "Obala Slonovače"
+msgid "(on %s)"
+msgstr "(na %s)"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Switzerland"
-msgstr "Ć vicarska"
+msgid "MM Series"
+msgstr "MM Series"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Congo (Brazzaville)"
-msgstr "Kongo (Brazzaville)"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr ""
+"Biblioteka koja brani od napada \"buffer overflow\" i \"format string\"."
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Central African Republic"
-msgstr "Centralnoafrička Republika"
+msgid "average"
+msgstr "prosjek"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congo (Kinshasa)"
-msgstr "Kongo (Kinshasa)"
+msgid "New printer name"
+msgstr "Novo ime ơtampača"
#: ../../lang.pm:1
#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Kokosova ostrva"
+msgid "Equatorial Guinea"
+msgstr "Ekvatorijalna Gvineja"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Canada"
-msgstr "Kanada"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belize"
-msgstr "Belize"
+msgid "Build Backup"
+msgstr "Izgradi backup"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Belarus"
-msgstr "Bjelorusija"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
+"Za ĆĄtampanje datoteke sa komandne linije (terminalski prozor) koristite "
+"komandu \"%s <datoteka>\" ili \"%s <datoteka>\".\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Botswana"
-msgstr "Bocvana"
+msgid "Currently, no alternative possibility is available"
+msgstr "Trenutno nije dostupna nijedna alternativa"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Bouvet Island"
-msgstr "Ostrvo Bouvet"
+msgid "Romanian (qwertz)"
+msgstr "Rumunska (qwertz)"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Bhutan"
-msgstr "Butan"
+msgid "Write Config"
+msgstr "ZapiĆĄi konfiguraciju"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Bahamas"
-msgstr "Bahami"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+"Routed demon omogućuje da se automatska IP tabela rutiranja podeơava\n"
+"preko RIP protokola. Mada se RIP često koristi na malim mreĆŸama, "
+"kompleksniji\n"
+"protokoli rutiranja su potrebni za sloĆŸene mreĆŸe."
#: ../../lang.pm:1
#, c-format
-msgid "Brazil"
-msgstr "Brazil"
+msgid "Kiribati"
+msgstr "Kiribati"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Bolivia"
-msgstr "Bolivija"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Brunei Darussalam"
-msgstr "Bruneji"
+msgid "Browse"
+msgstr "Pregledaj"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Bermuda"
-msgstr "Bermuda"
+msgid "CDROM"
+msgstr "CDROM"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Benin"
-msgstr "Benin"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "Da li se ĆŸelite pokuĆĄati spojiti na Internet sada?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Burundi"
-msgstr "Burundi"
+msgid "Belgian"
+msgstr "Belgijska"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bahrain"
-msgstr "Bahrein"
+msgid "Do you have an ISA sound card?"
+msgstr "Imate li ISA zvučnu karticu?"
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Bulgaria"
-msgstr "Bugarska"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
+msgstr ""
+"Nije pronađen ethernet mreĆŸni adapter na vaĆĄem sistemu.\n"
+"Ne mogu podesiti ovu vrstu konekcije."
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Burkina Faso"
-msgstr "Burkina Faso"
+msgid "Windows"
+msgstr "Windows"
-#: ../../lang.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Bangladesh"
-msgstr "BangladeĆĄ"
+msgid "Can't make screenshots before partitioning"
+msgstr "Ne mogu napraviti snimak ekrana prije particioniranja"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Barbados"
-msgstr "Barbados"
+msgid "Host Name"
+msgstr "Ime računara"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Bosna i Hercegovina"
+msgid "/File/Save _As"
+msgstr "/_Datoteka/Sačuvaj K_ao"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Azerbaijan"
-msgstr "AzerbejdĆŸan"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr ""
+"Da biste pristupili ơtampačima na udaljenim CUPS serverima u vaơoj lokalnoj "
+"mreĆŸi, sve ĆĄto treba je da uključite opciju \"Automatski pronađi dostupne "
+"ơtampače na udaljenim računarima\"; CUPS serveri će automatski informisati "
+"vaơ računar o svojim ơtampačima. Svi ơtampači koji su poznati vaơem računaru "
+"su navedeni u sekciji \"Udaljeni ơtampači\" glavnog Printerdrake prozora. "
+"Ako vaĆĄ CUPS server nije u lokalnoj mreĆŸi, morate ovdje unijeti njegovu IP "
+"adresu i eventualno broj porta kako biste dobili informacije od servera."
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Aruba"
-msgstr "Aruba"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr "%s nije u bazi skenera, ĆŸelite li ga ručno podesiti?"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "Australia"
-msgstr "Australija"
+msgid "Delay before booting default image"
+msgstr "Čekanje prije bootanja default image-a"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "American Samoa"
-msgstr "Američka Samoa"
+msgid "Restrict command line options"
+msgstr "Ograniči opcije komandne linije"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Argentina"
-msgstr "Argentina"
+msgid "East Europe"
+msgstr "Istočna Evropa"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Antarctica"
-msgstr "Antarktik"
+msgid "Use free space"
+msgstr "Koristi slobodan prostor"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Angola"
-msgstr "Angola"
+msgid "use dhcp"
+msgstr "koristi dhcp"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Netherlands Antilles"
-msgstr "Nizozemski Antili"
+msgid "Mail alert"
+msgstr "Mail obavijest"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Armenia"
-msgstr "Armenija"
+msgid "Internet configuration"
+msgstr "Internet konfiguracija"
#: ../../lang.pm:1
#, c-format
-msgid "Albania"
-msgstr "Albanija"
+msgid "Uzbekistan"
+msgstr "Uzbekistan"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Anguilla"
-msgstr "Anguilla"
+msgid "Detected %s"
+msgstr "Detektovan %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Antigua i Barbuda"
+msgid "/Autodetect _printers"
+msgstr "/Automatski prepoznaj ơtam_pače"
-#: ../../lang.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "United Arab Emirates"
-msgstr "Ujedinjeni Arapski Emirati"
+msgid "Finish"
+msgstr "Kraj"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Andorra"
-msgstr "Andora"
+msgid "Show automatically selected packages"
+msgstr "Automatski prikaĆŸi izabrane pakete"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Afghanistan"
-msgstr "Afganistan"
+msgid "CPU flags reported by the kernel"
+msgstr "CPU flagovi koje je prijavio kernel"
#: ../../lang.pm:1
#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
-
-#: ../../loopback.pm:1
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "KruĆŸno montiranje %s\n"
-
-#: ../../lvm.pm:1
-#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Najprije ukloni logičke volumene\n"
-
-#: ../../modules.pm:1
-#, c-format
-msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"PCMCIA podrĆĄka za 2.2 kernele viĆĄe ne postoji. Molim koristite 2.4 kernel."
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "POMJERITE VAƠ TOČKIĆ!"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "To activate the mouse,"
-msgstr "Da biste aktivirali miĆĄa,"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "Please test the mouse"
-msgstr "Molimo testirajte miĆĄ"
+msgid "Togo"
+msgstr "Togo"
-#: ../../mouse.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "No mouse"
-msgstr "Bez miĆĄa"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr "NeĆĄto je pogreĆĄno! - Da li je instaliran mkisofs?"
-#: ../../mouse.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "none"
-msgstr "nijedan"
+msgid "16 MB"
+msgstr "16 MB"
-#: ../../mouse.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "3 buttons"
-msgstr "3 dugmeta"
+msgid "Please try again"
+msgstr "Molimo pokuĆĄajte ponovo"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "2 buttons"
-msgstr "2 dugmeta"
+msgid "The model is correct"
+msgstr "Model je ispravan"
-#: ../../mouse.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "1 button"
-msgstr "1 dugme"
+msgid "FAT resizing failed: %s"
+msgstr "Smanjivanje FAT particije nije uspjelo: %s"
-#: ../../mouse.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "busmouse"
-msgstr "busmouse"
+msgid "Individual package selection"
+msgstr "Izbor pojedinačnih paketa"
-#: ../../mouse.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid "This partition is not resizeable"
+msgstr "Ovoj particiji ne moĆŸete mijenjati veličinu"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (serijski, stari C7 tip)"
+msgid "Location"
+msgstr "Lokacija"
-#: ../../mouse.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid "USA (cable-hrc)"
+msgstr "USA (cable-hrc)"
-#: ../../mouse.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "MM Series"
-msgstr "MM Series"
+msgid "Journalised FS"
+msgstr "Journalised FS"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid "Guatemala"
+msgstr "Gvatemala"
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "This machine"
+msgstr "Na ovom računaru"
-#: ../../mouse.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "DOS slovo uređaja: %s (pretpostavka)\n"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select the files or directories and click on 'OK'"
+msgstr "Izaberite datoteke ili direktorije i kliknite na 'Dodaj'"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid "Bahrain"
+msgstr "Bahrein"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "omit scsi modules"
+msgstr "izostavi scsi module"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "OpĆĄti miĆĄ sa 3 dugmeta"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr "Familija CPUa (npr: 6 za i686 generaciju)"
-#: ../../mouse.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "OpĆĄti miĆĄ sa 2 dugmeta"
+msgid ""
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
+msgstr ""
+"PoĆĄto radite mreĆŸnu instalaciju, vaĆĄa mreĆŸa je već podeĆĄena.\n"
+"Kliknite na Ok da zadrĆŸite tu konfiguraciju ili Odustani za podeĆĄavanje vaĆĄe "
+"Internet & MreĆŸne konekcije.\n"
-#: ../../mouse.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "serial"
-msgstr "serijski"
+msgid "Keyboard layout: %s\n"
+msgstr "Raspored tastature: %s\n"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
+"Ovdje moĆŸete izabrati da li ĆĄtampači spojeni na ovaj računar trebaju biti "
+"dostupni drugim računarima i kojim drugim računarima."
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Wheel"
-msgstr "Točkić"
+msgid "Maltese (US)"
+msgstr "MalteĆĄka (US)"
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Generic"
-msgstr "OpĆĄti"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"Montira i demontira sve Network File System (NFS), SMB (Lan\n"
+"Manager/Windows) i NCP (NetWare) tačke montiranja."
-#: ../../mouse.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid "Tvcard"
+msgstr "TV kartica"
-#: ../../mouse.pm:1
-#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Toggle between normal/expert mode"
+msgstr "Prebaci u normalni mod"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Opơti PS2 Miơ sa točkićem"
+msgid "Size"
+msgstr "Veličina"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "GRUB"
+msgstr "GB"
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Standard"
-msgstr "Standard"
+msgid "Greenland"
+msgstr "Grenland"
#: ../../mouse.pm:1
#, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - Mouse"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Prekidač između ravnog i grupnog sortiranja"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Collapse Tree"
-msgstr "Smanji stablo"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Expand Tree"
-msgstr "ProĆĄiri stablo"
-
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Info"
-msgstr "Info"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Is this correct?"
-msgstr "Da li je ovo ispravno?"
-
-#: ../../my_gtk.pm:1
-#, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Error writing to file %s"
-msgstr "GreĆĄka u pisanju datoteke: %s"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Bad backup file"
-msgstr "LoĆĄa backup datoteka"
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
-#: ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Povratak iz datoteke %s nije uspio: %s"
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr "Neispravna oznaka trake. Oznaka je %s."
-#: ../../partition_table.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"Imate rupu u vaĆĄoj tabeli particija, ali je ja ne mogu upotrijebiti.\n"
-"Jedino rjeĆĄenje je da pomjerite vaĆĄe primarne particije, kako bi se rupa "
-"naĆĄla pored extended particija"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Extended particije nisu podrĆŸane na ovoj platformi"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "mount failed: "
-msgstr "montiranje nije uspjelo: "
-
-#: ../../pkgs.pm:1
-#, c-format
-msgid "maybe"
-msgstr "moĆŸda"
-
-#: ../../pkgs.pm:1
-#, c-format
-msgid "nice"
-msgstr "fino"
-
-#: ../../pkgs.pm:1
-#, c-format
-msgid "very nice"
-msgstr "vrlo fino"
+"Dijeljenje Internet konekcije je već podeơeno. Trenutno je\n"
+"aktivno.\n"
+"\n"
+"Ć ta ĆŸelite uraditi?"
-#: ../../pkgs.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "important"
-msgstr "vaĆŸno"
+msgid "Delete All NBIs"
+msgstr "ObriĆĄi sve NBIje"
-#: ../../pkgs.pm:1
-#, c-format
-msgid "must have"
-msgstr "obavezno"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
+msgstr ""
+"Ovaj dijalog vam omogućuje da fino podesite vaơ bootloader:\n"
+"\n"
+" * \"Koristi bootloader\": ovdje su tri izbora za vaĆĄ bootloader:\n"
+"\n"
+" * \"GRUB\": ako preferirate grub (tekstualni meni),\n"
+"\n"
+" * \"LILO sa tekstualnim menijem\": ako preferirate LILO sa\n"
+"njegovim tekstualnim interfejsom.\n"
+"\n"
+" * \"LILO sa grafičkim menijem\": ako preferirate LILO sa njegovim\n"
+"grafičkim interfejsom.\n"
+"\n"
+" * \"Boot uređaj\": u većini slučajeva nije potrebno da mijenjate\n"
+"ponuđenu vrijednost (\"/dev/hda\"), ali ako to ĆŸelite, bootloader\n"
+"moĆŸe biti instaliran na drugi hard disk (\"/dev/hdb\") ili čak na\n"
+"disketu (\"/dev/fd0\");\n"
+"\n"
+" * \"Pauza prije bootanja default image-a\": nakon boota ili reboota\n"
+"računara, ovo je vrijeme koje je dato korisniku za računarom da izabere\n"
+"neku opciju iz boot menija koja se razlikuje od izabrane.\n"
+"\n"
+"!! Pazite da ako odaberete da ne ĆŸelite instalirati bootloader (klikanjem\n"
+"na \"Preskoči\"), morate se pobrinuti da imate neki način za pokretanje\n"
+"vaơeg Mandrake Linux sistema! Budite sigurni da znate ơta hoćete prije\n"
+"nego ĆĄto promijenite neku od ovih opcija. !!\n"
+"\n"
+"Klik na dugme \"Napredno\" u ovom dijalogu vam pruĆŸa napredne opcije\n"
+"rezervisane za ekspertnog korisnika."
-#: ../../raid.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nema dovoljno particija za RAID nivo %d\n"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
+msgstr ""
+"ako je uključeno, ơalje mail izvjeơtaj na ovu email adresu, inače ga ơalje "
+"root-u."
-#: ../../raid.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "mkraid failed"
-msgstr "mkraid nije uspio"
+msgid "Which configuration of XFree do you want to have?"
+msgstr "Koju konfiguraciju XFree ĆŸelite imati?"
-#: ../../raid.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid nije uspio (moĆŸda nedostaju raidtools?)"
+msgid "More"
+msgstr "JoĆĄ"
-#: ../../raid.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Ne mogu dodati particiju na _formatiran_ RAID md%d"
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+"Sa ovim sigurnosnim nivoom, postaje moguće koristiti ovaj sistem kao "
+"server.\n"
+"Sigurnost je sada dovoljno visoka za upotrebu sistema kao servera koji "
+"prima\n"
+"konekcije sa mnogo klijenata. Napomena: ako je vaơ računar samo klijent na "
+"Internetu, moĆŸda je bolje da izaberete niĆŸi nivo."
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Stop"
-msgstr "Stop"
+msgid "Account Password"
+msgstr "Ć ifra naloga"
-#: ../../services.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Start"
-msgstr "Start"
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
+msgstr ""
+"Odlučili ste da na particiju instalirate bootloader.\n"
+"Ovo podrazumijeva da već imate bootloader na hard disku sa kojeg bootate "
+"(npr: System Commander).\n"
+"\n"
+"Sa kojeg diska vrĆĄite boot?"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "On boot"
-msgstr "Prilikom boota"
+msgid "Tajik keyboard"
+msgstr "TadĆŸička tastatura"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No additional information\n"
-"about this service, sorry."
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
msgstr ""
-"Nema dodatnih informacija\n"
-"o ovom servisu, ĆŸalim."
+"MoĆŸete kopirati konfiguraciju ĆĄtampača koju ste napravili za spooler %s u % "
+"s, vaơ trenutni spooler. Svi podaci o konfiguraciji (naziv ơtampača, opis, "
+"lokacija, tip konekcije kao i podrazumjevane opcije) će biti preuzeti, ali "
+"zadaci ơtampe neće biti prebačeni.\n"
+"Svi redovi ne mogu biti prebačeni zbog sljedećih razloga:\n"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Services and deamons"
-msgstr "Servisi i demoni"
+msgid "Font List"
+msgstr "Lista fontova"
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "stopped"
-msgstr "zaustavljen"
+msgid ""
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
+msgstr ""
+"MoĆŸda ćete trebati promijeniti vaĆĄ Open Firmware boot uređaj\n"
+" da biste aktivirali bootloader. Ako ne vidite upit bootloadera\n"
+" prilikom bootanja, drĆŸite Command-Option-O-F prilikom boota\n"
+" i unesite:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Zatim kucajte: shut-down\n"
+"Prilikom idućeg boota biste trebali vidjeti upit bootloadera."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "running"
-msgstr "aktivan"
+msgid ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
+msgstr ""
+"Izgleda da imate OldWorld ili Unknown računar,\n"
+" yaboot bootloader neće raditi kod vas.\n"
+"Instalacija će se nastaviti, ali ćete\n"
+" morati koristiti BootX za bootanje vaơeg računara"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Izaberite koji servisi se trebaju pokretati automatski prilikom boota"
+msgid "Select file"
+msgstr "Izaberite datoteku"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Database Server"
-msgstr "Server baze podataka"
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
+msgstr "Izaberite mreĆŸu ili računar čijim ĆĄtampačima treba omogućiti pristup."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote Administration"
-msgstr "Udaljena administracija"
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr ""
+"Ove komande moĆŸete također koristiti u polju \"Komanda za ĆĄtampu\" u "
+"dijalozima za ĆĄtampu mnogih aplikacija, ali ovdje ne morate navesti ime "
+"datoteke jer tu datoteku obezbjeđuje sama aplikacija.\n"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "File sharing"
-msgstr "Dijeljenje datoteka"
+msgid "Japan"
+msgstr "Japan"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet"
-msgstr "Internet"
+msgid "Print option list"
+msgstr "Lista opcija za ĆĄtampu"
-#: ../../services.pm:1
+#: ../../standalone/localedrake:1
#, c-format
-msgid "Printing"
-msgstr "Ć tampa"
+msgid "The change is done, but to be effective you must logout"
+msgstr "Izmjena je napravljena, ali da bi stupila na snagu morate se odjaviti"
-#: ../../services.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Pokreće X Font Server (ovo je nuĆŸno da bi XFree radio)."
+msgid "Search servers"
+msgstr "TraĆŸi servere"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Pokreće drajvere za vaơe USB uređaje."
+msgid "NCP queue name missing!"
+msgstr "NCP naziv reda nedostaje!"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
+"Warning, another internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"Syslog je sistem pomoću kojeg mnogi servisi zapisuju poruke\n"
-"u razne sistemske dnevnike (logove). Pametno je uvijek imati pokrenuti "
-"syslog."
+"Upozorenje, otkrivena je druga Internet konekcija, moĆŸda preko vaĆĄe mreĆŸe"
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Pokreće zvučni sistem na vaơem računaru"
+msgid "Cd-Rom labeled \"%s\""
+msgstr "CD-ROM pod oznakom \"%s\""
#: ../../services.pm:1
#, c-format
msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
msgstr ""
-"Rwho protokol omogućava udaljenim korisnicima da dobiju listu svih\n"
-"korisnika prijavljenih na računar na kojem radi rwho demon (slično fingeru)."
+"Snima i učitava sistemski spremnik entropije za veću kvalitetu\n"
+"generisanja slučajnih brojeva."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
msgstr ""
-"Rusers protokol omogućava korisnicima na mreĆŸi da identificiraju\n"
-"ko je prijavljen na ostalim računarima."
+"Nisam uspio provjeriti datotečni sistem %s. Ćœelite li popraviti greĆĄke? "
+"(paĆŸnja, moĆŸete izgubiti podatke)"
-#: ../../services.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Rstat protokol omogućava korisnicima na mreĆŸi da dobave\n"
-"mjeru performansi za svaki računar na toj mreĆŸi"
+msgid "Turn your computer into a reliable server"
+msgstr "Pretvorite vaơ računar u pouzdan server"
-#: ../../services.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed demon omogućuje da se automatska IP tabela rutiranja podeơava\n"
-"preko RIP protokola. Mada se RIP često koristi na malim mreĆŸama, "
-"kompleksniji\n"
-"protokoli rutiranja su potrebni za sloĆŸene mreĆŸe."
+msgid " (driver %s)"
+msgstr " (drajver %s)"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
+"Loopback file(s):\n"
+" %s\n"
msgstr ""
-"Dodjeljuje raw uređaje blokovskim uređajima (kao ơto su\n"
-"particije hard diska), za potrebu aplikacija kao ĆĄto je Oracle ili DVD "
-"playeri"
+"Loopback datoteka(e):\n"
+" %s\n"
-#: ../../services.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Snima i učitava sistemski spremnik entropije za veću kvalitetu\n"
-"generisanja slučajnih brojeva."
+msgid "I don't know"
+msgstr "Ne znam"
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix je Mail Transport Agent, tj. program koji ĆĄalje poĆĄtu sa jednog "
-"računara na drugi."
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr ", TCP/IP host \"%s\", port %s"
-#: ../../services.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
msgstr ""
-"Portmapper upravlja RPC konekcijama, koje koriste protokoli kao ĆĄto\n"
-"su NFS i NIS. Portmap server mora raditi na računarima koje sluĆŸe kao\n"
-"serveri za protokole koji koriste RPC mehanizam."
+"Sada ćete podesiti Auto Instalacijsku disketu. Ova opcija je pomalo opasna i "
+"mora biti koriĆĄtena uz paĆŸnju.\n"
+"\n"
+"Sa ovom opcijom bićete u mogućnosti da ponovite instalaciju koju ste obavili "
+"na ovom računaru, pri ćemu ćete biti interaktivno upitani za neke korake, "
+"kako biste promijenili njihove vrijednosti.\n"
+"\n"
+"Za maksimalnu sigurnost, particioniranje i formatiranje nikad neće biti "
+"obavljeno automatski, bez obzira ĆĄta izaberete tokom instalacije na ovaj "
+"računar.\n"
+"\n"
+"Da li ĆŸelite nastaviti?"
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
msgstr ""
-"PCMCIA podrĆĄka sluĆŸi za ispravan rad uređaja kao ĆĄto su mreĆŸne\n"
-"kartice i modemi, priključenih na PCMCIA port (obično na laptopima).\n"
-"Neće se pokrenuti sve dok nije ispravno konfigurisan, tako da je\n"
-"sigurno imati ga instaliranog i na računarima kojima nije potreban."
-
-#: ../../services.pm:1
-#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Podrơka za OKI 4w i kompatibilne 'winprinter' ơtampače."
+"\n"
+"\n"
+"Vaơa kartica trenutno koristi %s \"%s\" drajver (uobičajeni drajver za vaơu "
+"karticu je \"%s\")"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Automatski uključuje numlock pod konzolom i grafičkim okruĆŸenjem\n"
-"prilikom boota."
+msgid "Post Uninstall"
+msgstr "Post Uninstall"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS je popularan protokol za dijeljenje datoteka preko TCP/IP mreĆŸa.\n"
-"Ovaj servis omogućuje NFS funkcionalnost zaključavanja datoteka."
+msgid " ("
+msgstr " ("
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS je popularan protokol za dijeljenje datoteka preko TCP/IP mreĆŸa.\n"
-"Ovaj servis omogućuje funkcionalnost NFS servera, kojeg podeơavate\n"
-"putem /etc/exports datoteke."
+msgid "Cpuid level"
+msgstr "Nivo cpuid-a"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktivira/deaktivira sve mreĆŸne interfejse koji su konfigurisani\n"
-"za pokretanje tokom boota."
+msgid "Mongolian (cyrillic)"
+msgstr "Mongolska (ćirilica)"
-#: ../../services.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Montira i demontira sve Network File System (NFS), SMB (Lan\n"
-"Manager/Windows) i NCP (NetWare) tačke montiranja."
+msgid "Add a module"
+msgstr "Dodaj modul"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) je Domain Name Server (DNS) koji se koristi za određivanje IP "
-"adrese iz imena računara."
+msgid "Profile to delete:"
+msgstr "Profil za brisanje:"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtuelni Server, koristi se za izgradnju servera visokih performansi\n"
-"i dostupnosti (clusteri servera)."
+msgid "Local measure"
+msgstr "Lokalne mjere"
-#: ../../services.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd je demon za ĆĄtampu koji je potreban da bi lpr sistem ĆĄtampe radio "
-"ispravno.\n"
-"To je u osnovi server koji dodjeljuje zadatke ơtampe ơtampaču/ima."
+msgid "busmouse"
+msgstr "busmouse"
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf će ponekad obaviti raznolike zadatke tokom boota\n"
-"kako bi se odrĆŸala sistemska konfiguracija."
+msgid "Account Login (user name)"
+msgstr "Login naloga (korisničko ime)"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Automatsko prepoznavanje i podeĆĄavanje hardware-a tokom boota."
+msgid "Fdiv bug"
+msgstr "Fdiv bug"
-#: ../../services.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
msgstr ""
-"Automatsko regenerisanje kernel zaglavlja u /boot za\n"
-"/usr/include/linux/{autoconf,version}.h"
+"drakfirewall podeơivač\n"
+"\n"
+"Prije nego ĆĄto nastavite, provjerite da li ste ispravno podesili pristup\n"
+"mreĆŸi/Internetu pomoću alata drakconnect."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ovaj paket učitava izabranu mapu tastature kao ơto je podeơeno u\n"
-"/etc/sysconfig/keyboard, ĆĄto se moĆŸe podesiti koriĆĄtenjem kbdconfig\n"
-"programa. Ovaj servis biste trebali ostaviti uključenim na većini računara."
+msgid "Benin"
+msgstr "Benin"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Pokreće filtriranje paketa za Linux kernele serije 2.2 kako\n"
-"bi se aktivirao firewall i zaĆĄtitio vaĆĄ računar od mreĆŸnih napada."
+msgid "Uruguay"
+msgstr "Urugvaj"
-#: ../../services.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet superserver (obično nazvan inetd) pokreće razne druge Internet\n"
-"servise po potrebi. Odgovoran je za pokretanje mnogih servisa, kao ĆĄto su\n"
-"telnet, ftp, rsh i rlogin. Isključivanje inetd-a isključuje sve servise za "
-"koje je\n"
-"on nadleĆŸan."
+msgid "Path selection"
+msgstr "Izbor staze"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache je World Wide Web server. Koristi se za posluĆŸivanje HTML\n"
-"datoteka i CGI skripti."
+msgid "Name/IP address of host:"
+msgstr "Ime/IP adresa računara:"
-#: ../../services.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake ispituje hardware i eventualno podeĆĄava novi ili\n"
-"izmjenjeni hardware."
+msgid "Monitor: %s\n"
+msgstr "Monitor: %s\n"
-#: ../../services.pm:1
+#: ../../partition_table/raw.pm:1
#, c-format
msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
msgstr ""
-"GPM dodaje podrĆĄku za miĆĄa tekstualnim aplikacijama kao ĆĄto je\n"
-"Midnight Commander. On također omogućuje konzolne isjeci/umetni operacije\n"
-"pomoću miơa i uključuje podrơku za pop-up menije na konzoli."
+"NeĆĄto loĆĄe se deĆĄava na vaĆĄem disku. \n"
+"Test integriteta podataka nije uspio. \n"
+"To znači će da pisanje bilo čega na disk rezultirati smećem."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Cron je standardan UNIX program koji periodično pokreće programe koje\n"
-"zada korisnik. Vixie cron dodaje veći broj mogućnosti osnovnom\n"
-"UNIX cronu, uključujući bolju sigurnost i moćnije opcije za podeơavanje."
+msgid "Printer host name or IP missing!"
+msgstr "Nedostaje hostname ơtampača ili IP adresa!"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"IzvrĆĄava naredbe zakazane putem at komande u zadato vrijeme,\n"
-"te pokreće programe u pozadini kada je računar neopterećen."
+msgid "Please check all users that you want to include in your backup."
+msgstr "Molimo izaberite sve korisnike koje ĆŸelite uključiti u vaĆĄ backup."
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
msgstr ""
-"Apmd se koristi za nadgledanje statusa baterija i njegovo biljeĆŸenje preko\n"
-"sysloga. Takođe se moĆŸe koristiti za gaĆĄenje računara kada su baterije pri "
-"kraju."
-
-#: ../../services.pm:1
-#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron je periodični izvrơitelj programa."
+"%s se mora podesiti iz printerdrake-a.\n"
+"MoĆŸete pokrenuti printerdrake iz Mandrake Kontrolnog centra u odjeljku "
+"Hardware."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Pokreće ALSA zvučni sistem (Advanced Linux Sound Architecture)"
+msgid "Bangladesh"
+msgstr "BangladeĆĄ"
-#: ../../standalone.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Installing packages..."
-msgstr "Instaliram pakete..."
+msgid "Japan (cable)"
+msgstr "Japan (kablovska)"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
"\n"
-"Upotreba: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+"Dobro doơli u Čarobnjak za podeơavanje ơtampača\n"
+"\n"
+"Ovaj čarobnjak će vam pomoći da instalirate ơtampače spojene na ovaj "
+"računar, na mreĆŸu ili na udaljeni Windows računar\n"
+"\n"
+"Ako imate ơtampač spojen na ovaj računar, molim priključite ga na računar i "
+"upalite ga kako bi bio auto-prepoznat. Takođe mreĆŸni ĆĄtampači i Windows "
+"računari moraju biti povezani i upaljeni.\n"
+"\n"
+"Obratite paĆŸnju da detekcija mreĆŸnih ĆĄtampača traje duĆŸe nego detekcija "
+"ĆĄtampača spojenih na ovaj računar. Stoga ugasite detekciju mreĆŸnih ĆĄtampača "
+"i/ili Windows ơtampača ako vam ona nije potrebna.\n"
+"\n"
+"Kliknite na \"Dalje\" kada budete spremni, ili na \"Odustani\" ako ne ĆŸelite "
+"podesiti ơtampač sada."
-#: ../../standalone.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
-msgstr ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake rezolucija"
+msgid "Initial tests"
+msgstr "Probni inicijali"
-#: ../../standalone.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+msgid "Continue"
+msgstr "Nastavak"
-#: ../../standalone.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
+msgid "Custom Restore"
+msgstr "Ručno vraćanje"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
msgstr ""
-"[OPTION]...\n"
-" --no-confirmation ne postavljaj prvo pitanje u MandrakeUpdate modu\n"
-" --no-verify-rpm ne provjeravaj potpise paketa\n"
-" --changelog-first prikaĆŸi changelog prije filelist u opisnom prozoru\n"
-" --merge-all-rpmnew predloĆŸi merge svih pronađenih .rpmnew/.rpmsave "
-"datoteka"
+"\"Zvučna kartica\": ako je na vaơem sistemu otkrivena zvučna kartica, ona "
+"će\n"
+"biti prikazana ovdje. Ako primjetite da prikazana zvučna kartica nije ona\n"
+"koja je ustvari dio vaĆĄeg sistema, moĆŸete kliknuti na dugme i odabrati neki\n"
+"drugi drajver."
-#: ../../standalone.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "Script-based"
+msgstr "Skripta"
-#: ../../standalone.pm:1
+#: ../../install_any.pm:1 ../../partition_table.pm:1
#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
-msgstr ""
-"[OPTIONS]\n"
-"Aplikacija za povezivanje na mreĆŸu/Internet i nadzor veze\n"
-"\n"
-"--defaultintf interface : podesi podrazumijevani interfejs\n"
-"--connect : spoji se na Inernet, ako nisi već spojen\n"
-"--disconnect : prekini vezu s Internetom, ako si spojen\n"
-"--force : koristi se sa (dis)connect : prinudi operaciju.\n"
-"--status : vraća 1 ako je spojen, u suprotnom 0.\n"
-"--quiet : bez interaktivnosti. Koristi se sa (dis)connect."
+msgid "Error reading file %s"
+msgstr "Greơka u čitanju datoteke %s"
-#: ../../standalone.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr "[--file=mojfajl] [--word=mojarijec] [--explain=regexp] [--alert]"
+msgid "PLL setting:"
+msgstr "PLL postavka:"
-#: ../../standalone.pm:1
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
#, c-format
-msgid "[keyboard]"
-msgstr "[tastatura]"
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "Morate imati FAT particiju montiranu na /boot/efi"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
-msgstr ""
-"[OPTIONS]...\n"
-"PodeĆĄavanje Mandrake Terminal Servera\n"
-"--enable : omogući MTS\n"
-"--disable : onemogući MTS\n"
-"--start : pokreni MTS\n"
-"--stop : zaustavi MTS\n"
-"--adduser : dodaj postojećeg sistemskog korisnika MTSu (potrebno je "
-"korisničko ime)\n"
-"--deluser : obriơi postojećeg sistemskog korisnika sa MTSa (potrebno "
-"je korisničko ime)\n"
-"--addclient : dodaj klijentski računar MTSu (potrebna je MAC adresa, "
-"IP, nbi image ime)\n"
-"--delclient : obriơi klijentski računar sa MTSa (potrebna je MAC "
-"adresa, IP, nbi image ime)"
+msgid " on "
+msgstr " na "
-#: ../../standalone.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
-msgstr ""
-"Aplikacija za uvoz i nadzor fontova \n"
-"--windows_import : uvezi sa dostupnih windows particija.\n"
-"--xls_fonts : prikaĆŸi sve postojeće fontove koje prijavljuje xls\n"
-"--strong : jaka provjera fonta.\n"
-"--install : instaliraj bilo koji font ili direktorij.\n"
-"--uninstall : deinstaliraj bilo koji font ili direktorij.\n"
-"--replace : zamijeni font ako vec postoji\n"
-"--application : 0 bez aplikacija.\n"
-" : 1 podrĆĄka za sve poznate aplikacije.\n"
-" : ime_aplikacije kao so za staroffice \n"
-" : i gs za ghostscript za samo tu aplikaciju."
+msgid "The URL must begin with http:// or https://"
+msgstr "URL mora počinjati sa http:// ili https://"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
msgstr ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPCIJE:\n"
-" --help - ispisuje ovu pomoć.\n"
-" --report - program treba biti neki od mandrake alata\n"
-" --incident - program treba biti neki od mandrake alata"
+"MoĆŸete dati direktno URI za pristup ĆĄtampaču. URI mora zadovoljavati ili "
+"CUPS ili Foomatic specifikacije. Obratite paĆŸnju da nisu svi tipovi URIja "
+"podrĆŸani od svih spoolera."
+
+#: ../../any.pm:1
+#, c-format
+msgid "Other OS (SunOS...)"
+msgstr "Ostali OSi (SunOS...)"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Install/Upgrade"
+msgstr "Instaliraj/Unaprijedi"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "%d packages"
+msgstr "%d paketa"
#: ../../standalone.pm:1
#, c-format
@@ -7429,4863 +6776,5347 @@ msgstr ""
"--help : show this message.\n"
"--version : show version number.\n"
-#: ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Domain Authentication Required"
+msgstr "Potrebna je autentikacija na domeni"
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
msgstr ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Exit install"
-msgstr "Napusti instalaciju"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Install updates"
-msgstr "Instaliraj update"
+" Hvala:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
-#: ../../steps.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Configure services"
-msgstr "PodeĆĄavanje servisa"
+msgid "Costa Rica"
+msgstr "Kostarika"
-#: ../../steps.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Configure X"
-msgstr "PodeĆĄavanje X"
+msgid "Use libsafe for servers"
+msgstr "Koristi libsafe za servere"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Install bootloader"
-msgstr "Instalacija bootloadera"
+msgid "Icelandic"
+msgstr "Islandska"
-#: ../../steps.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Configure networking"
-msgstr "PodeĆĄavanje mreĆŸe"
+msgid ""
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
+"\n"
+"Upotreba: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
-#: ../../steps.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Add a user"
-msgstr "Dodajte korisnika"
+msgid "Please relog into %s to activate the changes"
+msgstr "Molimo ponovo se prijavite na %s radi aktiviranja izmjena"
-#: ../../steps.pm:1
+#: ../../my_gtk.pm:1
#, c-format
-msgid "Root password"
-msgstr "Root ĆĄifra"
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-#: ../../steps.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Install system"
-msgstr "Sistem instalacije"
+msgid "Lilo/grub mode"
+msgstr "Lilo/grub mod"
-#: ../../steps.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Choose packages to install"
-msgstr "Izaberite pakete za instalaciju"
+msgid "Output"
+msgstr "Ispis"
-#: ../../steps.pm:1
+#: ../../loopback.pm:1
#, c-format
-msgid "Format partitions"
-msgstr "Formatiranje particija"
+msgid "Circular mounts %s\n"
+msgstr "KruĆŸno montiranje %s\n"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Partitioning"
-msgstr "Particioniranje"
+msgid "Martinique"
+msgstr "Martinik"
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose your keyboard"
-msgstr "Izaberite vaĆĄu tastaturu"
+msgid "HardDrive / NFS"
+msgstr "HardDrive / NFS"
-#: ../../steps.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Select installation class"
-msgstr "Izaberite klasu instalacije"
+msgid "a number"
+msgstr "broj"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Hard drive detection"
-msgstr "Prepoznavanje hard diska"
+msgid "Swedish"
+msgstr "Ć vedska"
-#: ../../steps.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Configure mouse"
-msgstr "PodeĆĄavanje miĆĄa"
+msgid "Which %s driver should I try?"
+msgstr "Koji %s drajver ću pokuơati?"
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "License"
-msgstr "Licenca"
+msgid ""
+"You will receive an alert if one of the selected services is no longer "
+"running"
+msgstr "Primićete obavjeơtenje ako neki od izabranih servisa prestane raditi"
-#: ../../steps.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Language"
-msgstr "Jezik"
+msgid "Filesystem types:"
+msgstr "Tipovi file sistema:"
-#: ../../ugtk2.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "utopia 25"
-msgstr "utopia 25"
+msgid ", multi-function device on HP JetDirect"
+msgstr ", viơenamjenski uređaj na HP JetDirect"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "OK"
-msgstr "U redu"
+msgid "Northern Mariana Islands"
+msgstr "Sjeverna Marijanska ostrva"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "logdrake"
-msgstr "logdrake"
+msgid "none"
+msgstr "nijedan"
-#: ../../ugtk.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-2,*-r-*"
+msgid "user :"
+msgstr "korisnik :"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installation display driver)"
+msgid "Please enter your password"
+msgstr "Molimo unesite vaĆĄu ĆĄifru"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
msgstr ""
-"VaĆĄa kartica moĆŸe imati podrĆĄku za 3D hardversko ubrzanje sa XFree %s,\n"
-"PAĆœNJA OVO JE EKSPERIMENTALNA PODRĆ KA I MOĆœE ZALEDITI VAĆ  RAČUNAR."
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s sa EKSPERIMENTALNIM 3D hardverskim ubrzanjem"
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "VaĆĄa kartica moĆŸe imati podrĆĄku za 3D hardversko ubrzanje sa XFree %s."
+"Naziv profila koji će biti kreiran (novi profil je kreiran kao kopija "
+"postojećeg) :"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s sa 3D hardverskim ubrzanjem"
+msgid "Floppy"
+msgstr "Disketa"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"VaĆĄa kartica moĆŸe imati podrĆĄku za 3D hardversko ubrzanje sa XFree %s,\n"
-"PAĆœNJA OVO JE EKSPERIMENTALNA PODRĆ KA I MOĆœE ZALEDITI VAĆ  RAČUNAR.\n"
-"VaĆĄu karticu takođe podrĆŸava XFree %s koji moĆŸe imati bolju podrĆĄku za 2D."
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "Molim uključite ako ĆŸelite obrisati vaĆĄ RW medij (prva sesija)"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"VaĆĄa kartica moĆŸe imati podrĆĄku za 3D hardversko ubrzanje ali samo sa\n"
-"XFree %s. VaĆĄu karticu takođe podrĆŸava XFree %s koji moĆŸe imati bolju "
-"podrĆĄku za 2D."
+msgid "Ghostscript referencing"
+msgstr "Ghostscript referenciranje"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
+msgid "Bootloader"
+msgstr "Bootloader"
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Podesi samo karticu \"%s\"%s"
+msgid "Move"
+msgstr "PremjeĆĄtanje"
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Use Xinerama extension"
-msgstr "Koristi Xinerama ekstenziju"
+msgid "Bootloader to use"
+msgstr "Bootloader koji ćete koristiti"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configure all heads independently"
-msgstr "KonfiguriĆĄi sve glave odvojeno"
+msgid "SMB server host"
+msgstr "SMB server ime"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Koju konfiguraciju XFree ĆŸelite imati?"
+msgid "Name Servers:"
+msgstr "DNS serveri:"
-#: ../../Xconfig/card.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "XFree configuration"
-msgstr "XFree konfiguracija"
+msgid ""
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
+msgstr ""
+"\n"
+"PaĆŸnja\n"
+"\n"
+"Molim pročitajte paĆŸljivo uslove licence ispod. Ako se ne slaĆŸete sa bilo\n"
+"kojim dijelom, nije vam dozvoljeno da instalirate naredni CD medij. "
+"Pritisnite\n"
+"dugme 'odbij' da biste nastavili sa instalacijom bez koriĆĄtenja ovog "
+"medija.\n"
+"Budući da prevodilac ovog teksta nije u mogućnosti da osigura pravnu\n"
+"provjeru prevedenog teksta, tekst je ostavljen u originalnom (engleskom)\n"
+"obliku.\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Izaberite veličinu memorije vaơe grafičke karte"
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Ukloni ovaj ơtampač iz Star/Open Offica"
-#: ../../Xconfig/card.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
msgstr ""
-"VaĆĄ sistem podrĆŸava konfiguraciju viĆĄe glava.\n"
-"Ć ta ĆŸelite učiniti?"
+"Linux Virtuelni Server, koristi se za izgradnju servera visokih performansi\n"
+"i dostupnosti (clusteri servera)."
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Multi-head configuration"
-msgstr "Multi-head konfiguracija"
+msgid "4 billion colors (32 bits)"
+msgstr "4 milijarde boja (32 bita)"
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose an X server"
-msgstr "Izaberite X server"
+msgid "Micronesia"
+msgstr "Micronesia"
-#: ../../Xconfig/card.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "X server"
-msgstr "X server"
+msgid "License"
+msgstr "Licenca"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "64 MB or more"
-msgstr "64 MB ili viĆĄe"
+msgid "This may take a moment to generate the keys."
+msgstr "MoĆŸda će trebati par trenutaka da se generiĆĄu ključevi."
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "32 MB"
-msgstr "32 MB"
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgstr "Automatsko prepoznavanje ơtampača (lokalni, TCP/Socket i SMB ơtampači)"
-#: ../../Xconfig/card.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "16 MB"
-msgstr "16 MB"
+msgid "Sagem (using pppoa) usb"
+msgstr "Sagem (koristeći pppoa) usb"
-#: ../../Xconfig/card.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "8 MB"
-msgstr "8 MB"
+msgid ""
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
+msgstr ""
+"Doơlo je do greơke - nije pronađen nijedan ispravan uređaj na kojem se mogu "
+"kreirati novi file sistemi. Molimo provjerite vaơ hardware i pronađite uzrok "
+"greĆĄke"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "4 MB"
-msgstr "4 MB"
+msgid "Starting the printing system at boot time"
+msgstr "Pokrećem sistem za ơtampu tokom boota"
-#: ../../Xconfig/card.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "2 MB"
-msgstr "2 MB"
+msgid "Do you want to start the connection at boot?"
+msgstr "Da li ĆŸelite pokrenuti konekciju prilikom boota?"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "1 MB"
-msgstr "1 MB"
+msgid "Processor ID"
+msgstr "ID procesora"
-#: ../../Xconfig/card.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "512 kB"
-msgstr "512 kB"
+msgid "Sound trouble shooting"
+msgstr "RjeĆĄavanje problema sa zvukom"
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "256 kB"
-msgstr "256 kB"
+msgid "Polish (qwerty layout)"
+msgstr "Poljska (qwerty)"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "activate now"
+msgstr "pokreni sada"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
"\n"
-"%s"
+"Drakbackup activities via CD:\n"
+"\n"
msgstr ""
-"ZadrĆŸati izmjene?\n"
-"Trenutna konfiguracija je:\n"
"\n"
-"%s"
+"Drakbackup aktivnosti putem CDa:\n"
+"\n"
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Options"
-msgstr "Opcije"
+msgid ""
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
+msgstr ""
+"Sada ćete instalirati sistem za ơtampu %s na sistemu koji je na sigurnosnom "
+"nivou % s.\n"
+"\n"
+"Ovaj sistem za ơtampu pokreće demon (pozadinski proces) koji čeka zadatke "
+"ơtampe i rjeơava ih. Ovom demonu takođe mogu pristupiti drugi računari putem "
+"mreĆŸe, tako da je to moguća tačka napada. Stoga se tek rijetki od odabranih "
+"demona pokreću na ovom sigurnosnom nivou.\n"
+"\n"
+"Da li zaista ĆŸelite podesiti ĆĄtampanje na ovom računaru?"
-#: ../../Xconfig/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Test"
-msgstr "Test"
+msgid "Host \"%s\", port %s"
+msgstr "Host \"%s\", port %s"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Resolution"
-msgstr "Rezolucija"
+msgid "This partition can't be used for loopback"
+msgstr "Ova particija se ne moĆŸe koristiti za loopback"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Monitor"
-msgstr "Monitor"
+msgid "File already exists. Use it?"
+msgstr "Datoteka već postoji. Ćœelite li je koristiti?"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Graphic Card"
-msgstr "Grafička karta"
+msgid "received: "
+msgstr "primljeno:"
-#: ../../Xconfig/monitor.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Vertical refresh rate"
-msgstr "Brzina vertikalnog osvjeĆŸavanja"
+msgid "Right Alt key"
+msgstr "Desna Alt tipka"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Brzina horizontalnog osvjeĆŸavanja"
+msgid "the list of alternative drivers for this sound card"
+msgstr "spisak alternativnih drajvera za ovu zvučnu karticu"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Dva kritična parametra su brzina vertikalnog osvjeĆŸenja, ĆĄto je brzina\n"
-"kojom se cijeli ekran osvjeĆŸava, i brzina horizontalne\n"
-"sinhronizacije, ĆĄto je brzina kojm se prikazuju skan-linije.\n"
-"\n"
-"VEOMA JE VAĆœNO da ne izaberete tip monitora čiji je sinhronizacioni\n"
-"raspon izvan mogućnosti vaĆĄeg monitora: time moĆŸete oĆĄtetiti monitor.\n"
-" Ako niste sigurni, izaberite najmanju opciju."
+msgid "Gateway"
+msgstr "Gateway"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr ""
-"Plug'n'Play probanje nije uspjelo. Molim izaberite odgovarajući monitor"
+msgid "Scanner sharing"
+msgstr "Dijeljenje skenera"
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Vendor"
-msgstr "Proizvođač"
+msgid "Tonga"
+msgstr "Tonga"
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Plug'n Play"
-msgstr "Plug'n Play"
+msgid "Tunisia"
+msgstr "Tunis"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose a monitor"
-msgstr "Izaberite monitor"
+msgid "Profile: "
+msgstr "Profil:"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Graphics card: %s"
-msgstr "Grafička karta: %s"
+msgid ""
+"Click on a device in the left tree in order to display its information here."
+msgstr ""
+"Kliknite na uređaj u lijevom drvetu kako biste prikazali njegove informacije."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Izaberite rezoluciju i broj boja"
+msgid "XawTV isn't installed!"
+msgstr "XawTV nije instaliran!"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Resolutions"
-msgstr "Rezolucije"
+msgid ""
+"Create/Transfer\n"
+"backup keys for SSH"
+msgstr ""
+"Napravi/premjesti\n"
+"backup ključeve za SSH"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 milijarde boja (32 bita)"
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr "Zaobiđi kritične datoteke (passwd, group, fstab)"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 miliona boja (24 bita)"
+msgid "old static device name used in dev package"
+msgstr "staro statičko ime uređaja koje koristi dev paket"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 hiljada boja (16 bita)"
+msgid "This label is already used"
+msgstr "Ova oznaka je već u upotrebi"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 hiljada boja (15 bita)"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"Dobro doơli u Čarobnjak za podeơavanje ơtampača\n"
+"\n"
+"Ovaj čarobnjak će vam pomoći da instalirate ơtampače spojene na ovaj računar "
+"ili spojene na mreĆŸu.\n"
+"\n"
+"Ako imate ơtampač spojen na ovaj računar, molim priključite ga na računar i "
+"upalite ga kako bi bio auto-prepoznat. Takođe mreĆŸni ĆĄtampači moraju biti "
+"spojeni i upaljeni.\n"
+"\n"
+"Obratite paĆŸnju da detekcija mreĆŸnih ĆĄtampača traje duĆŸe nego detekcija "
+"ĆĄtampača spojenih na ovaj računar. Stoga ugasite detekciju mreĆŸnih ĆĄtampača "
+"ako vam ona nije potrebna.\n"
+"\n"
+"Kliknite na \"Dalje\" kada budete spremni, ili na \"Odustani\" ako ne ĆŸelite "
+"podesiti ơtampač sada."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 boja (8 bita)"
+msgid "After formatting partition %s, all data on this partition will be lost"
+msgstr ""
+"Nakon formatiranja particije %s, svi podaci na toj particiji će biti "
+"izgubljeni"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Is this the correct setting?"
-msgstr "Da li je ovo ispravno?"
+msgid "Connection Time: "
+msgstr "Vrijeme konekcije: "
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Leaving in %d seconds"
-msgstr "NapuĆĄtam za %d sekundi"
+msgid "select perm file to see/edit"
+msgstr "izaberi perm datoteku za pregled/izmjenu"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/livedrake:1
#, c-format
msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
-"DoĆĄlo je do greĆĄke:\n"
-"%s\n"
-"Probajte promijeniti neke parametre"
-
-#: ../../Xconfig/test.pm:1
-#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Upozorenje: testiranje ove grafičke karte moĆŸe zalediti računar"
+"Molimo ubacite Instalacioni CD u vaơ CD-ROM uređaj i pritisnite Ok kad ste "
+"spremni.\n"
+"Ako ga nemate, pritisnite Odustani da bi se izbjegao live upgrade."
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Ćœelite li testirati konfiguraciju?"
+msgid "Use group id for execution"
+msgstr "Koristi id grupe za izvrĆĄavanje"
-#: ../../Xconfig/test.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Test of the configuration"
-msgstr "Testiranje konfiguracije"
+msgid "Choose the default user:"
+msgstr "Izaberite default korisnika:"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "What norm is your TV using?"
-msgstr "Koji standard koristi vaĆĄ TV?"
+msgid "Gabon"
+msgstr "Gabon"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
msgstr ""
-"Izgleda da vaơa grafička kartica ima TV-OUT konektor.\n"
-"On se moĆŸe podesiti da radi koristeći frame-buffer.\n"
"\n"
-"Za ovo je potrebno da uključite grafičku karticu u TV prije nego ơto upalite "
-"računar.\n"
-"Zatim u meniju bootloadera izaberite opciju \"TVout\"\n"
-"\n"
-"Imate li ovu mogućnost?"
+"Ovdje ne morate podeơavati ơtampače na udaljenim CUPS serverima; ovi "
+"ơtampači će biti automatski prepoznati."
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
msgstr ""
-"Mogu podesiti vaơ računar da automatski pokrene grafički interfejs (XFree) "
-"pri pokretanju računara.\n"
-"Ćœelite li da se XFree automatski pokreće?"
-
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "Grafički interfejs pri pokretanju"
+"Mandrake Linux podrĆŸava viĆĄe jezika. Izaberite jezike koje\n"
+"ĆŸelite instalirati. Oni će biti dostupni kada se zavrĆĄi vaĆĄa\n"
+"instalacija i restartujete vaĆĄ sistem."
-#: ../../Xconfig/various.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 drajver: %s\n"
+msgid "Domain"
+msgstr "Domena"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 server: %s\n"
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "Precizna veličina RAMa ako je potrebno (pronađeno %d MB)"
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Rezolucija: %s\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
+"\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
+"\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
+msgstr ""
+"LILO i grub su Linux bootloader-i. Ova faza je obično automatizovana.\n"
+"DrakX će analizirati boot sektor diska i postupati u skladu s onim ơto\n"
+"zatekne tamo:\n"
+"\n"
+" * ako pronađe Windows boot sektor, biće zamijenjen sa grub/LILO boot\n"
+"sektorom. Na ovaj način bićete u mogućnosti da učitate ili GNU/Linux ili\n"
+"neki drugi OS.\n"
+"\n"
+" * ako pronađe grub ili LILO boot sektor, zamijeniće ga novim.\n"
+"\n"
+"Ako ne moĆŸe donijeti odluku, DrakX će vas pitati gdje da postavi\n"
+"bootloader.\n"
+"\n"
+"\"Boot uređaj\": u većini slučajeva, ne trebate mijenjati ponuđeno\n"
+"(\"Prvi sektor diska (MBR)\"), ali ako odlučite, moĆŸete instalirati "
+"bootloader\n"
+"na drugi hard disk (\"/dev/hdb\") ili čak na disketu (\"Na disketi\")."
-#: ../../Xconfig/various.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Color depth: %s\n"
-msgstr "Broj boja: %s\n"
+msgid "Provider dns 2 (optional)"
+msgstr "Provider dns 2 (opcionalno)"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Grafička memorija: %s kB\n"
+msgid "Boot device"
+msgstr "Boot uređaj"
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Grafička karta: %s\n"
+msgid "Which partition do you want to resize?"
+msgstr "Kojoj particiji ĆŸelite promijeniti veličinu?"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitor VertRefresh: %s\n"
+msgid "United States Minor Outlying Islands"
+msgstr "United States Minor Outlying Islands"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitor HorizSync: %s\n"
+msgid "A tool to monitor your logs"
+msgstr "Alat za pregled vaĆĄih logova"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
+msgid "Djibouti"
+msgstr "DĆŸibuti"
-#: ../../Xconfig/various.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Uređaj miơa: %s\n"
+msgid "detected on port %s"
+msgstr "detektovan na portu %s"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Vrsta miĆĄa: %s\n"
+msgid "LPD"
+msgstr "LPD"
#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Raspored tastature: %s\n"
+msgid "Graphics card: %s\n"
+msgstr "Grafička karta: %s\n"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Options: %s"
-msgstr "Opcije: %s"
+msgid "Yaboot"
+msgstr "Yaboot"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mount point: "
-msgstr "Tačka montiranja: "
+msgid "Please check if you are using a DVDRAM device"
+msgstr "Molim uključite ako koristite DVDRAM uređaj"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Server: "
-msgstr "Server:"
+msgid "Splash selection"
+msgstr "Izbor splash-a"
-#: ../../diskdrake/dav.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "URL mora počinjati sa http:// ili https://"
+msgid "Extended partition not supported on this platform"
+msgstr "Extended particije nisu podrĆŸane na ovoj platformi"
-#: ../../diskdrake/dav.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Molim unesite URL WebDAV servera"
+msgid "ISDN Configuration"
+msgstr "PodeĆĄavanje ISDNa"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mount point"
-msgstr "Tačka montiranja"
+msgid "high"
+msgstr "visok"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Server"
-msgstr "Server"
+msgid "Internet Connection Sharing"
+msgstr "Dijeljenje Internet konekcije"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Mount"
-msgstr "Montiraj"
+msgid "Choose file"
+msgstr "Izaberi datoteku"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Unmount"
-msgstr "Demontiraj"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
+msgstr ""
+"Upozorenje! Pronađena je postojeća konfiguracija firewalla. MoĆŸda će biti "
+"potrebno neko ručno podeơavanje nakon instalacije."
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New"
-msgstr "Novi"
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "Ć tampam/pristupam foto kartici na \"%s\""
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
msgstr ""
-"WebDAV je protokol koji vam omogućuje da direktorij web servera\n"
-"montirate lokalno i da ga tretirate kao lokalni direktorij (pod uslovom da\n"
-"je web server podeĆĄen kao WebDAV server). Ako ĆŸelite dodati WebDAV\n"
-"tačke montiranja, izaberite \"Novi\"."
+"Ćœelite li omogućiti ĆĄtampanje na ĆĄtampačima navedenim gore ili na ĆĄtampačima "
+"u lokalnoj mreĆŸi?\n"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Koristi ``%s'' umjesto toga"
+msgid "Printer default settings"
+msgstr "Podrazumjevane postavke ơtampača"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Type"
-msgstr "Tip"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Opơti PS2 Miơ sa točkićem"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Najprije koristite ``Demontiraj''"
+msgid "Removing old printer \"%s\"..."
+msgstr "Uklanjam stari ơtampač \"%s\" ..."
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Delete"
-msgstr "ObriĆĄi"
+msgid "Select a device !"
+msgstr "Izaberite uređaj !"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create"
-msgstr "Kreiraj"
+msgid "Remove selected server"
+msgstr "Ukloni izabrani server"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Filesystem types:"
-msgstr "Tipovi file sistema:"
+msgid "French Southern Territories"
+msgstr "Francuske JuĆŸne Teritorije"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Empty"
-msgstr "Prazno"
+msgid "the vendor name of the processor"
+msgstr "naziv proizvođača procesora"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Windows"
-msgstr "Windows"
+msgid "All data on this partition should be backed-up"
+msgstr "Svi podaci na toj particiji bi trebali biti backupovani"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "Installing package %s"
+msgstr "Instaliram paket %s"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "Checking device and configuring HPOJ..."
+msgstr "Provjeravam uređaj i podeơavam HPOJ..."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Swap"
-msgstr "Swap"
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
+msgstr ""
+"Da biste imali joĆĄ particija, molimo pobriĆĄite jednu kako bi se mogla "
+"kreirati extended particija"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Journalised FS"
-msgstr "Journalised FS"
+msgid ""
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
+msgstr ""
+"Vaơ ơtampač je podeơen automatski kako bi vam dao pristup memoriji foto "
+"kartice sa PCa. Sada moĆŸete pristupiti vaĆĄim foto karticama koristeći "
+"grafički program \"MToolsFM\" (Meni: \"Aplikacije\" -> \"Datotečni alati\" -"
+"> \"MTools File Manager\") ili alat komandne linije \"mtools\" (kucajte "
+"\"man mtools\" na komandnoj liniji za viơe informacija). Datotečni sistem "
+"vaơe kartice ćete naći pod slovom \"p:\", ili pod narednim slovima ako imate "
+"viơe od jednog HP ơtampača sa jedinicom za foto kartice. U \"MToolsFM\" "
+"promijeniti slovo drajva koristeći polje u gornjem desnom uglu liste "
+"datoteka."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Ext2"
-msgstr "Ext2"
+msgid "Choose packages to install"
+msgstr "Izaberite pakete za instalaciju"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No hard drives found"
-msgstr "Nije pronađen nijedan hard disk"
+msgid ""
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
+msgstr ""
+"\n"
+" Neke greĆĄke prilikom slanja poruka moĆŸe izazvati \n"
+" loĆĄe podeĆĄen postfix. Ovo moĆŸete rijeĆĄiti tako ĆĄto ćete\n"
+" podesiti myhostname ili mydomain u /etc/postfix/main.cf\n"
+"\n"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Please click on a partition"
-msgstr "Molimo kliknite na particiju"
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr ""
+"SVE postojeće particije i podaci na njima će biti izgubljeni na disku %s"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
msgstr ""
-"Imate jednu veliku Microsoft Windows particiju.\n"
-"PredlaĆŸem da najprije promijenite veličinu te particije\n"
-"(kliknite na nju, zatim na \"Promijeni veličinu\")"
+"Vaơ sistem nema dovoljno preostalog prostora za instalaciju ili unaprjeđenje "
+"(%d > %d)"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose action"
-msgstr "Izaberi akciju"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
+msgstr ""
+"Svakom ơtampaču treba dati ime (npr. \"stampac\"). Polja Opis i Lokacija "
+"nije potrebno popuniti. Oni su komentari za korisnike."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
+msgstr ""
+"\"Ơtampač\": klikanjem na dugme \"Podesi\" otvorićete čarobnjak za\n"
+"podeơavanje ơtampača. Konsultujte odgovarajuće poglavlje \"Vodiča za\n"
+"početnike\" za viơe informacija o tome kako podesiti novi ơtampač. "
+"Interfejs\n"
+"koji je tamo prikazan je vrlo sličan onom koji se koristi prilikom "
+"instalacije."
+
+#: ../../lang.pm:1
#, c-format
-msgid "Wizard"
-msgstr "Čarobnjak"
+msgid "Bhutan"
+msgstr "Butan"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Ako planirate koristiti aboot, budite paĆŸljivi i ostavite slobodnog prostora "
-"(2048 sektora je dovoljno)\n"
-"na početku diska"
+msgid "Network interface"
+msgstr "MreĆŸni interface"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Molim najprije napravite backup vaĆĄih podataka"
+msgid "Reading printer data..."
+msgstr "Čitam podatke o ơtampaču..."
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Read carefully!"
-msgstr "Pročitajte paĆŸljivo!"
+msgid "Korean keyboard"
+msgstr "Korejanska tastatura"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Encryption key (again)"
-msgstr "Ključ enkripcije (joơ jednom)"
+msgid "Not connected"
+msgstr "Nije konektovan"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Encryption key"
-msgstr "Ključ enkripcije"
+msgid "Greek"
+msgstr "Grčka"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "The encryption keys do not match"
-msgstr "Ključevi enkripcije se ne poklapaju"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
+msgid "Saint Kitts and Nevis"
+msgstr "Saint Kitts and Nevis"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
msgstr ""
-"Ovaj ključ enkripcije je previơe jednostavan (mora imati najmanje %d "
-"karaktera)"
+"Transfer uspjeĆĄan\n"
+"MoĆŸda je potrebno da provjerite da li se moĆŸete prijaviti na server sa:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"bez pitanja o ĆĄifri."
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "Izaberite vaơ ključ za kodiranje datotečnog sistema"
+msgid "Enable OF Boot?"
+msgstr "Omogući boot sa OFa?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Filesystem encryption key"
-msgstr "Ključ za kodiranje datotečnog sistema"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "Ne moĆŸete koristiti JFS za particije manje od 16MB"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Type: "
-msgstr "Tip: "
+msgid "Monitor VertRefresh: %s\n"
+msgstr "Monitor VertRefresh: %s\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "on channel %d id %d\n"
-msgstr "na kanalu %d id %d\n"
+msgid "path"
+msgstr "staza"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tip tabele particija: %s\n"
+msgid "Mount point"
+msgstr "Tačka montiranja"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diskovi %s\n"
+msgid ""
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
+msgstr ""
+"DoĆĄlo je do greĆĄke:\n"
+"%s\n"
+"Probajte promijeniti neke parametre"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Info: "
-msgstr "Info: "
+msgid "Restore system"
+msgstr "Vrati sistem"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrija: %s cilindara, %s glava, %s sektora\n"
+msgid ""
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
+msgstr "Ovo su računari kojima treba dozvoliti koriơtenje lokalnog skenera:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Size: %s\n"
-msgstr "Veličina: %s\n"
+msgid "The DHCP end ip"
+msgstr "Krajnja DHCP adresa"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Read-only"
-msgstr "Samo za čitanje"
+msgid "Another one"
+msgstr "JoĆĄ jedan"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Device: "
-msgstr "Uređaj: "
+msgid "Drakbackup"
+msgstr "Drakbackup"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Ova posebna Bootstrap\n"
-"particija je za\n"
-"dvojni boot vaĆĄeg sistema.\n"
+msgid "Colombia"
+msgstr "Kolumbija"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
+"Current configuration of `%s':\n"
"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
msgstr ""
+"Trenutna konfiguracija `%s':\n"
"\n"
-"Postoji mogućnost da je ova\n"
-"particija Driver particija. Vjerovatno\n"
-"biste je trebali ostaviti na miru.\n"
+"MreĆŸa: %s\n"
+"IP adresa: %s\n"
+"IP atributi: %s\n"
+"Drajver: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Loopback file name: %s"
-msgstr "Naziv loopback datoteke: %s"
+msgid "Plug'n Play"
+msgstr "Plug'n Play"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diskovi %s\n"
+msgid "Reunion"
+msgstr "Reunion"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Chunk size %s\n"
-msgstr "Veličina chunka %s\n"
+msgid "Details"
+msgstr "Detalji"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Level %s\n"
-msgstr "Nivo %s\n"
+msgid "For security reasons, it will be disconnected now."
+msgstr "Iz sigurnosnih razloga, sada će biti odspojen."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Particija koja se boota po defaultu\n"
-" (za MS-DOS boot, ne za lilo)\n"
+msgid "Synchronization tool"
+msgstr "Alat za sinhroniziranje"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr ""
-"Loopback datoteka(e):\n"
-" %s\n"
+msgid "Checking your system..."
+msgstr "Proveravam vaĆĄ sistem..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+msgid "Print"
+msgstr "Ć tampaj"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mounted\n"
-msgstr "Montirana\n"
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
+"Ubacite traku sa oznakom %s u kasetni\n"
+"uređaj %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not formatted\n"
-msgstr "Nije formatirana\n"
+msgid "Mongolia"
+msgstr "Mongolija"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Formatted\n"
-msgstr "Formatirana\n"
+msgid "Mounted\n"
+msgstr "Montirana\n"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cilindar %d do %d\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Graphical Interface"
+msgstr "Grafički interfejs"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektora"
+msgid "Restore Users"
+msgstr "Vrati korisnike"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Size: %s"
-msgstr "Veličina: %s"
+msgid "Encryption key for %s"
+msgstr "Ključ enkripcije za %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Start: sector %s\n"
-msgstr "Početak: sector %s\n"
+msgid ""
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
+msgstr ""
+"Portmapper upravlja RPC konekcijama, koje koriste protokoli kao ĆĄto\n"
+"su NFS i NIS. Portmap server mora raditi na računarima koje sluĆŸe kao\n"
+"serveri za protokole koji koriste RPC mehanizam."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Name: "
-msgstr "Ime: "
+msgid "Detected hardware"
+msgstr "Detektovani hardver"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS slovo uređaja: %s (pretpostavka)\n"
+msgid "Mauritius"
+msgstr "Mauricijus"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "partition %s is now known as %s"
-msgstr "particija %s je od sada poznata kao %s"
+msgid "Myanmar (Burmese)"
+msgstr "Mjanmarska (Burmanska)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Removing %s"
-msgstr "Uklanjam %s"
+msgid "Enabling swap partition %s"
+msgstr "Uključujem swap particiju %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Copying %s"
-msgstr "Kopiram %s"
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgstr ""
+"Ne postoji nijedna FAT particija za upotrebu kao loopback (ili nije ostalo "
+"dovoljno prostora)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Moving files to the new partition"
-msgstr "PremjeĆĄtam datoteke na novu particiju"
+msgid "Armenian (old)"
+msgstr "Armenska (stara)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
msgstr ""
-"Direktorij %s već sadrĆŸi neke podatke\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Hide files"
-msgstr "Sakrij datoteke"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Move files to the new partition"
-msgstr "Prebaci datoteke na novu particiju"
+"Ơtampač pod imenom \"%s\" već postoji pod %s: \n"
+"Kliknite na \"Prebaci\" da to prepiĆĄete.\n"
+"MoĆŸete također unijeti novo ime ili preskočiti ovaj ĆĄtampač."
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
+msgid ""
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
msgstr ""
-"Nakon formatiranja particije %s, svi podaci na toj particiji će biti "
-"izgubljeni"
+"Pronađite rjeơenja za vaơe probleme putem MandrakeSoft-ove online podrơke."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-"Biće potrebno da rebootate prije nego ơto izmjene mogu stupiti na snagu"
+msgid ", host \"%s\", port %s"
+msgstr ", host \"%s\", port %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Tabela particija za uređaj %s će biti zapisana na disk!"
+msgid "Monaco"
+msgstr "Monako"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "Potreban je paket %s. Da li ga ĆŸelite instalirati?"
+msgid "%s formatting of %s failed"
+msgstr "%s formatiranje %s nije uspjelo"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "What type of partitioning?"
-msgstr "Koju vrstu particioniranja?"
+msgid "Partitioning failed: %s"
+msgstr "Particioniranje nije uspjelo: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Budite oprezni: ova operacija je opasna."
+msgid "Canada (cable)"
+msgstr "Kanada (kablovska)"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "chunk size"
-msgstr "veličina chunka"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Upgrade"
+msgstr "Unaprijedi %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "level"
-msgstr "nivo"
+msgid "Workstation"
+msgstr "Radna stanica"
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "device"
-msgstr "uređaj"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"Instaliram paket %s\n"
+"%d%%"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Various"
-msgstr "Razni"
+msgid "Kyrgyzstan"
+msgstr "Kirgistan"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Mount options"
-msgstr "Opcije montiranja"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "With basic documentation"
+msgstr "Sa osnovnom dokumentacijom (preporučeno)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "File already exists. Use it?"
-msgstr "Datoteka već postoji. Ćœelite li je koristiti?"
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anacron je periodični izvrơitelj programa."
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "Datoteku već koristi drugi loopback, izaberite neku drugu"
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"Morate imati root particiju.\n"
+"Za ovo, napravite jednu particiju (ili kliknite na neku od postojećih).\n"
+"Zatim izaberite opciju ``Tačka montiranja'' i postavite je na `/'"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Give a file name"
-msgstr "Dajte naziv datoteke"
+msgid "Proxy should be http://..."
+msgstr "Proxy treba biti http://..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Filesystem type: "
-msgstr "Tip datotečnog sistema: "
+msgid "South Africa"
+msgstr "JuĆŸna Afrika"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Size in MB: "
-msgstr "Veličina u MB: "
+msgid "Western Sahara"
+msgstr "Zapadna Sahara"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Loopback file name: "
-msgstr "Naziv loopback datoteke: "
+msgid "Etherboot Floppy/ISO"
+msgstr "Etherboot Floppy/ISO"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Loopback"
-msgstr "Loopback"
+msgid "Modify printer configuration"
+msgstr "Izmjeni konfiguraciju ơtampača"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "Ova particija se ne moĆŸe koristiti za loopback"
+msgid "Choose a partition"
+msgstr "Izaberi particiju"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "LVM name?"
-msgstr "Naziv LVMa?"
+msgid "Edit current rule"
+msgstr "Izmijeni trenutno pravilo"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "new"
-msgstr "novi"
+msgid "%s"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Izaberite postojeći LVM na koji ćete dodati"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Izaberite postojeći RAID na koji ćete dodati"
+msgid "Please test the mouse"
+msgstr "Molimo testirajte miĆĄ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Moving partition..."
-msgstr "PremjeĆĄtam particiju..."
+msgid "Other Media"
+msgstr "Drugi medij"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Moving"
-msgstr "PremjeĆĄtam"
+msgid "Backup system files"
+msgstr "Backup sistemskih datoteka"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "Na koji sektor je ĆŸelite premjestiti?"
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Sector"
msgstr "Sektor"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "Na koji disk je ĆŸelite premjestiti?"
+msgid "Qatar"
+msgstr "Katar"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Move"
-msgstr "PremjeĆĄtanje"
+msgid "LDAP Base dn"
+msgstr "LDAP Base dn"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "New size in MB: "
-msgstr "Nova veličina u MB: "
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr "Ne moĆŸete izabrati ovaj paket jer nema dovoljno prostora za njega"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Choose the new size"
-msgstr "Izaberite novu veličinu"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "generate auto-install floppy"
+msgstr "Napravi auto instalacijsku disketu"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Resize"
-msgstr "Smanji"
+msgid "Dialing mode"
+msgstr "Način biranja broja"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Nakon promjene veličine particije %s, svi podaci na njoj će biti izgubljeni"
+msgid "File sharing"
+msgstr "Dijeljenje datoteka"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Svi podaci na toj particiji bi trebali biti backupovani"
+msgid "Clean /tmp at each boot"
+msgstr "Očisti /tmp prilikom svakog boota"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This partition is not resizeable"
-msgstr "Ovoj particiji ne moĆŸete mijenjati veličinu"
+msgid "Malawi"
+msgstr "Malavi"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Izračunavam granice FAT filesistema"
+msgid "Please choose your type of mouse."
+msgstr "Molimo izaberite vrstu vaĆĄeg miĆĄa."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "Gdje ĆŸelite montirati uređaj %s?"
+msgid "class of hardware device"
+msgstr "klasa hardverskog uređaja"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Ne mogu izmjeniti tačku montiranja jer se ova particija koristi za "
-"loopback.\n"
-"Najprije uklonite loopback"
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
+msgstr "Ovo su računari i mreĆŸe čiji lokalni ĆĄtampači trebaju biti dostupni:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Gdje ĆŸelite montirati uređaj %s?"
+msgid "United Kingdom"
+msgstr "Ujedinjeno Kraljevstvo"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "Gdje ĆŸelite montirati loopback datoteku %s?"
+msgid "running"
+msgstr "aktivan"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "Prebacujem sa ext2 na ext3"
+msgid "default"
+msgstr "Podrazumijevano"
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which filesystem do you want?"
-msgstr "Koji datotečni sistem ĆŸelite?"
+msgid "Indonesia"
+msgstr "Indonezija"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Change partition type"
-msgstr "Izmjena tipa particije"
+msgid "France [SECAM]"
+msgstr "Francuska [SECAM]"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "restrict"
+msgstr "ograniči"
+
+#: ../../pkgs.pm:1
+#, c-format
+msgid "must have"
+msgstr "obavezno"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
msgstr ""
-"Nakon promjene tipa particije %s, svi podaci na ovoj particiji će biti "
-"izgubljeni"
+"CUPS ne podrĆŸava ĆĄtampače na Novell serverima ili ĆĄtampačekoji ĆĄalju podatke "
+"u komandama slobodnog oblika.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remove the loopback file?"
-msgstr "Ukloniti loopback datoteku?"
+msgid "Senegal"
+msgstr "Senegal"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Command line"
+msgstr "Komandna linija"
+
+#: ../../share/advertising/08-store.pl:1
#, c-format
msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
msgstr ""
-"Ne moĆŸete napraviti novu particiju\n"
-"(poĆĄto ste dosegli maksimalan broj primarnih particija).\n"
-"Najprije uklonite primarnu particiju i napravite extended (proĆĄirenu) "
-"particiju."
+"Čitav raspon Linux rjeơenja, kao i posebne ponude za proizvode i "
+"\"potrepĆĄtine\", dostupni su u naĆĄoj online radnji:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Preference: "
-msgstr "Preference: "
+msgid "access to administrative files"
+msgstr "pristup administrativnim datotekama"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Start sector: "
-msgstr "Početni sektor: "
+msgid ""
+"Error during sendmail.\n"
+" Your report mail was not sent.\n"
+" Please configure sendmail"
+msgstr ""
+"GreĆĄka tokom sendmaila.\n"
+" VaĆĄ mail izvjeĆĄtaj nije poslan.\n"
+" Molim podesite sendmail"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Create a new partition"
-msgstr "Napravi novu particiju"
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ", viơenamjenski uređaj na paralelnom portu \\#%s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Use for loopback"
-msgstr "Koristi za loopback"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
+msgstr ""
+"Argumenti: (val)\n"
+"\n"
+"Postavlja istek vremena shella. Vrijednost nula znači bez isteka vremena."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Modify RAID"
-msgstr "Modificiraj RAID"
+msgid "Montserrat"
+msgstr "Montserrat"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Remove from LVM"
-msgstr "Ukloni sa LVMa"
+msgid "Automatic dependencies"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Remove from RAID"
-msgstr "Ukloni sa RAIDa"
+msgid "Swap"
+msgstr "Swap"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Add to LVM"
-msgstr "Dodaj na LVM"
+msgid "Connecting to the Internet "
+msgstr "Spajam se na Internet"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add to RAID"
-msgstr "Dodaj na RAID"
+msgid "Restore Other"
+msgstr "Vrati ostalo"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Format"
-msgstr "Formatiraj"
+msgid "TV card"
+msgstr "TV kartica"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Detailed information"
-msgstr "Detaljne informacije"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "Ơtampač na SMB/Windows 95/98/NT serveru"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Trying to rescue partition table"
-msgstr "PokuĆĄavam da spasim tabelu particija"
+msgid ", "
+msgstr ", "
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
msgstr ""
-"Ubacite disketu u jedinicu\n"
-"Svi podaci na toj disketi će biti izgubljeni"
-
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Warning"
-msgstr "Upozorenje"
+"Argumenti: (umask)\n"
+"\n"
+"Postavlja root-ov umask."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select file"
-msgstr "Izaberite datoteku"
+msgid "Remove selected host/network"
+msgstr "Ukloni izabrani računar/mreĆŸu"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
msgstr ""
-"Backup tabela particija nema istu veličinu\n"
-"Ipak nastavljate?"
+"Postfix je Mail Transport Agent, tj. program koji ĆĄalje poĆĄtu sa jednog "
+"računara na drugi."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Removable media automounting"
-msgstr "Automatsko montiranje izmjenjivog medija"
+msgid "Disconnection from the Internet failed."
+msgstr "Prekid veze sa Internetom nije uspio."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Reload partition table"
-msgstr "Ponovo učitaj tabelu particija"
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
+msgstr ""
+"Ovdje moĆŸete izabrati tipku ili kombinaciju tipki koja će\n"
+"izvrơiti prebacivanje između raznih rasporeda tastature\n"
+"(npr: latinični i ne-latinični)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Rescue partition table"
-msgstr "Spasi tabelu particija"
+msgid "Network Hotplugging"
+msgstr "Network Hotplugging"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Restore partition table"
-msgstr "Vrati tabelu particija"
+msgid "if set to yes, reports check result to tty."
+msgstr "ako je postavljeno na da, prijavljuje rezultate provjere na tty."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Save partition table"
-msgstr "Snimi tabelu particija"
+msgid "Restore From CD"
+msgstr "Vrati sa CDa"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-"Da biste imali joĆĄ particija, molimo pobriĆĄite jednu kako bi se mogla "
-"kreirati extended particija"
+"Sada ćete konfigurisati vaơ računar za dijeljenje Internet konekcije.\n"
+"Sa ovom opcijom, ostali računari na vaĆĄoj lokalnoj mreĆŸi će moći koristiti "
+"Internet konekciju ovog računara. \n"
+"\n"
+"Prije nego ĆĄto nastavite, provjerite da li ste podesili vaĆĄ mreĆŸni/internet "
+"pristup koristeći drakconnect.\n"
+"\n"
+"Napomena: potreban vam je poseban MreĆŸni adapter da biste podesili Lokalnu "
+"mreĆŸu (LAN)."
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "I can't add any more partition"
-msgstr "Ne mogu dodati viĆĄe particija"
+msgid ""
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr ""
+"Molimo izaberite koji mreĆŸni adapter ĆŸelite koristiti za spajanje na Internet"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "All primary partitions are used"
-msgstr "Sve primarne particije su u upotrebi"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr ""
+"Pristup foto memorijskoj kartici na vaơem HP multifunkcionalnom uređaju"
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Hard drive information"
-msgstr "Informacije o hard disku"
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
+"Unaprijedite performanse vaơeg računara uz pomoć naơih odabranih partnera "
+"koji pruĆŸaju profesionalna rjeĆĄenja kompatibilna sa Mandrake Linuxom"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Auto allocate"
-msgstr "Auto alokacija"
+msgid "Internet Connection Sharing is now disabled."
+msgstr "Dijeljenje Internet konekcije je sada isključeno."
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Clear all"
-msgstr "ObriĆĄi sve"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr "ako je postavljeno na da, provjerava checksum suid/sgid datoteka."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Ćœelite li spasiti izmjene /etc/fstab"
+msgid "Latin American"
+msgstr "Latino-Američka"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Izlazite bez pisanja tabele particija?"
+msgid "Japanese text printing mode"
+msgstr "Japanski reĆŸim ĆĄtampanja"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Quit without saving"
-msgstr "Izlaz bez spaĆĄavanja"
+msgid "Old device file"
+msgstr "Stara datoteka uređaja"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Continue anyway?"
-msgstr "Svejedno nastavljate?"
+msgid "Info: "
+msgstr "Info: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Toggle to expert mode"
-msgstr "Prebaci u ekspertni mod"
+msgid "Button `%s': %s"
+msgstr "Dugme '%s': %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Toggle to normal mode"
-msgstr "Prebaci u normalni mod"
+msgid "Please wait"
+msgstr "Molimo sačekajte"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Undo"
-msgstr "PoniĆĄti"
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Exit"
-msgstr "Izlaz"
+msgid "None"
+msgstr "NiĆĄta"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose a partition"
-msgstr "Izaberi particiju"
+msgid "The entered IP is not correct.\n"
+msgstr "Unesena IP adresa nije ispravna.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose another partition"
-msgstr "Izaberi drugu particiju"
+msgid "Ethernet Card"
+msgstr "Ethernet kartica"
-#: ../../diskdrake/removable.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Change type"
-msgstr "Promijeni tip"
+msgid "Info"
+msgstr "Info"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Search servers"
-msgstr "TraĆŸi servere"
+msgid "Install"
+msgstr "Instalacija"
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Domain"
-msgstr "Domena"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr ""
+"Kliknite na \"Dalje ->\" ako ĆŸelite obrisati sve podatke i particije koje\n"
+"su prisutne na ovom hard disku. Budite oprezni, jer nakon klikanja na\n"
+"\"Dalje ->\" nećete moći vratiti podatke i particije koji se trenutno "
+"nalaze\n"
+"na ovom hard disku, uključujući i sve Windows podatke.\n"
+"\n"
+"Kliknite na \"<- Nazad\" da obustavite ovu operaciju bez gubitka\n"
+"podataka i particija na ovom hard disku."
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Username"
-msgstr "Korisničko ime"
+msgid "Exit install"
+msgstr "Napusti instalaciju"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Please enter your username, password and domain name to access this host."
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
msgstr ""
-"Molim unesite vaơe korisničko ime, ơifru i domen da biste pristupili ovom "
-"računaru."
+"Sve je konfigurisano.\n"
+"Sada moĆŸete dijeliti Internet konekciju sa ostalim računarima na vaĆĄoj "
+"lokalnoj mreĆŸi, koristeći automatsku mreĆŸnu konfiguraciju (DHCP)."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Domain Authentication Required"
-msgstr "Potrebna je autentikacija na domeni"
+msgid "Remote CUPS server"
+msgstr "Udaljeni CUPS server"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Another one"
-msgstr "JoĆĄ jedan"
+msgid "Sun - Mouse"
+msgstr "Sun - Mouse"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Which username"
-msgstr "Koje korisničko ime"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
+msgstr ""
+"Trenutno je samo jedan mreĆŸni adapter podeĆĄen na vaĆĄem sistemu:\n"
+"\n"
+"%s\n"
+"\n"
+"Sada ću podesiti vaĆĄu Lokalnu mreĆŸu sa ovim adapterom."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Can't login using username %s (bad password?)"
-msgstr "Ne mogu se prijaviti koristeći korisničko ime %s (pogreơna ơifa?)"
+msgid "Minimal install"
+msgstr "Minimalna instalacija"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "cpu # "
-msgstr "cpu # "
+msgid "Ethiopia"
+msgstr "Etiopija"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "SMBus controllers"
-msgstr "SMBus kontroleri"
+msgid "Devanagari"
+msgstr "Devanagari"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "USB controllers"
-msgstr "USB kontroleri"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr ""
+"- pci devices: ovo daje PCI slot, uređaj i funkciju ove kartice\n"
+"- eide devices: uređaj moĆŸe biti master ili slave\n"
+"- scsi devices: SCSI id-ovi za: bus i device"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "SCSI controllers"
-msgstr "SCSI kontroleri"
+msgid "Total size: %d / %d MB"
+msgstr "Ukupna veličina: %d / %d MB"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Firewire controllers"
-msgstr "Firewire kontroleri"
+msgid "disabled"
+msgstr "isključen"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "(E)IDE/ATA kontroleri"
+msgid "Search for new scanners"
+msgstr "TraĆŸenje novih skenera"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Joystick"
-msgstr "Joystick"
+msgid "Disabling servers..."
+msgstr "Isključujem servere..."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Scanner"
-msgstr "Skener"
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr ""
+"Izaberite vremenski interval\n"
+"između svakog backupa"
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Unknown/Others"
-msgstr "Nepoznat/Ostali"
+msgid "Installation of %s failed. The following error occured:"
+msgstr "Instalacija %sa nije uspjela. Javila se sljedeća greơka:"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Bridges and system controllers"
-msgstr "Mostovi (bridges) i sistemski kontroleri"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr "Ne mogu izvrĆĄiti mkinitrd -f /boot/initrd-%s.img %s."
-#: ../../harddrake/data.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Modem"
-msgstr "Modem"
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
+msgstr ""
+"Izabrali ste sljedeći server (servere): %s\n"
+"\n"
+"\n"
+"Ovi serveri su aktivirani automatski. Oni nemaju nikakvih poznatih "
+"sigurnosnih\n"
+"problema, ali moĆŸda će biti pronađeni u budućnosti. U tom slučaju, morate "
+"ih\n"
+"upgrade-ovati ơto prije bude moguće.\n"
+"\n"
+"\n"
+"Da li zaista ĆŸelite instalirati ove servere?\n"
-#: ../../harddrake/data.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Ethernetcard"
-msgstr "Ethernet kartica"
+msgid "Network printer (TCP/Socket)"
+msgstr "MreĆŸni ĆĄtampač (TCP/Socket)"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Processors"
-msgstr "Procesori"
+msgid "Backup User files..."
+msgstr "Backup-uj korisničke datoteke..."
-#: ../../harddrake/data.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Webcam"
-msgstr "Web kamera"
+msgid "Install system"
+msgstr "Sistem instalacije"
-#: ../../harddrake/data.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Soundcard"
-msgstr "Zvučna kartica"
+msgid "First DNS Server (optional)"
+msgstr "Prvi DNS server (opcionalno)"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Other MultiMedia devices"
-msgstr "Drugi multimedijalni uređaj"
+msgid ""
+"Alternatively, you can specify a device name/file name in the input line"
+msgstr ""
+"Alternativno, moĆŸete nasvesti naziv uređaja / naziv datoteke na ulaznoj "
+"liniji"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Tvcard"
-msgstr "TV kartica"
+msgid "dhcpd Config..."
+msgstr "dhcpd podeĆĄavanje..."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Videocard"
-msgstr "Video kartica"
+msgid "The setup has already been done, but it's currently disabled."
+msgstr "Podeơavanje je već zavrơeno, ali je trenutno isključeno."
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Tape"
-msgstr "Traka"
+msgid "LILO/grub Installation"
+msgstr "LILO/grub instalacija"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
+msgid "Israeli"
+msgstr "Izraelska"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "CD/DVD burners"
-msgstr "CD/DVD prĆŸilica"
+msgid "load setting"
+msgstr "postavka opterećenja"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "CDROM"
-msgstr "CDROM"
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "Ơtampač \"%s\" na serveru \"%s\""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Disk"
-msgstr "Disk"
+msgid "Floppy can be removed now"
+msgstr "Sada moĆŸete izvaditi disketu"
-#: ../../harddrake/data.pm:1
-#, c-format
-msgid "Zip"
-msgstr "Zip"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Truly minimal install"
+msgstr "Minimalna instalacija"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Floppy"
-msgstr "Disketa"
+msgid "Denmark"
+msgstr "Danska"
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Let me pick any driver"
-msgstr "Dozvoli da odaberem bilo koji drajver"
+msgid "Moving partition..."
+msgstr "PremjeĆĄtam particiju..."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Driver:"
-msgstr "Drajver:"
+msgid "(This) DHCP Server IP"
+msgstr "IP adresa (ovog) DHCP servera"
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
-"Ako stvarno mislite da znate koji drajver je odgovarajući za vaơu karticu\n"
-"moĆŸete odabrati jedan sa gornje liste.\n"
-"\n"
-"Trenutni drajver za vaơu \"%s\" zvučnu karticu je \"%s\""
+msgid "Test of the configuration"
+msgstr "Testiranje konfiguracije"
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr "Slobodan izbor drajvera"
+msgid "Installing %s ..."
+msgstr "Instaliram %s..."
-#: ../../harddrake/sound.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
msgstr ""
-"Klasični način utvrđivanja bugova u zvučnom sistemu je izvrơavanje\n"
-"sljedećih naredbi:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" će vam reći koji drajver koristi vaơa\n"
-"kartica inače\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" će vam reći koji drajver je\n"
-"trenutno u upotrebi\n"
+"Ako ste naveli da ĆŸelite individualno izabrati pakete, biće vam prikazano\n"
+"stablo koje sadrĆŸi sve pakete klasifikovane po grupama i podgrupama.\n"
+"Pregledajući stablo, moĆŸete izabrati čitave grupe, podgrupe ili "
+"individualne\n"
+"pakete.\n"
"\n"
-"- sa \"/sbin/lsmod\" moĆŸete provjeriti da li je modul (drajver) učitan\n"
-"ili ne\n"
+"Kad god izaberete paket na stablu, desno od njega se pojavljuje opis koji\n"
+"vam objaĆĄnjava svrhu paketa.\n"
"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" vam\n"
-"govori da li su servisi sound i alsa podeơeni da se pokreću na\n"
-"initlevel 3\n"
+"!! Ako izaberete neki serverski paket, zato ơto ste specifično izabrali taj\n"
+"paket ili zato ơto je on dio grupe paketa, bićete zamoljeni da potvrdite da\n"
+"zaista ĆŸelite da taj server bude instaliran. Mandrake Linux obično "
+"automatski\n"
+"pokreće sve instalirane servise prilikom pokretanja sistema. Čak i ako su\n"
+"sigurni i nemaju poznatih problema u trenutku pakovanja distribucije,\n"
+"sasvim je moguće da su neke sigurnosne rupe otkrivene nakon ơto je\n"
+"dovrơena ova verzija Mandrake Linuxa. Ako niste sigurni čemu tačno\n"
+"sluĆŸi taj paket ili zaĆĄto ga treba instalirati, kliknite na \"Ne\". Klikanje "
+"na\n"
+"\"Da\" će instalirati navedene servise i oni će biti automatski pokrenuti\n"
+"tokom pokretanja sistema. !!\n"
"\n"
-"- \"aumix -q\" će vam reći da li je zvuk utiơan (muted) ili ne\n"
+"Opcija \"Automatske zavisnosti\" se koristi da bi se isključio dijalog "
+"upozorenja\n"
+"koji se pojavljuje svaki put kada instalacioni program automatski izabere\n"
+"neki paket kako bi razrijeĆĄio neku zavisnost. Pojedini paketi imaju "
+"zavisnost\n"
+"jedan od drugog u smislu da instalacija jednog paketa traĆŸi da bude "
+"instaliran\n"
+"i drugi. Instalacioni program moĆŸe odrediti koji paketi su potrebni da bi "
+"se\n"
+"zadovoljila zavisnost i uspjeĆĄno zavrĆĄila instalacija.\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" vam govori koji program koristi zvučnu "
-"karticu.\n"
-
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Sound trouble shooting"
-msgstr "RjeĆĄavanje problema sa zvukom"
+"Mala ikona sa disketom na dnu liste vam omogućuje da učitate listu paketa\n"
+"koja je napravljena tokom neke ranije instalacije. Ovo je korisno ako ĆŸelite "
+"da\n"
+"imate nekoliko računara koji su identično podeơeni. Nakon klika na ovu "
+"ikonu\n"
+"bićete zamoljeni da u disketnu jedinicu stavite disketu napravljenu tokom "
+"ranije\n"
+"instalacije. Pogledajte drugi savjet na zadnjem koraku da biste saznali kako "
+"se\n"
+"pravi ova disketa."
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "Greơka: Drajver \"%s\" za vaơu zvučnu karticu nije na listi"
+msgid "Choose your filesystem encryption key"
+msgstr "Izaberite vaơ ključ za kodiranje datotečnog sistema"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unkown driver"
-msgstr "Nepoznat drajver"
+msgid ""
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
+msgstr ""
+"Molim izaberite vaơ CD/DVD uređaj\n"
+"(Pritisnite Enter za propagaciju postavki na ostala polja. \n"
+"Ovo polje nije obavezno, ono je samo alat za popunjavanje formulara.)"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "Nema poznatih drajvera za vaơu zvučnu karticu (%s)"
+msgid "Andorra"
+msgstr "Andora"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No known driver"
-msgstr "Nema nijedan poznat drajver"
+msgid "Sierra Leone"
+msgstr "Sierra Leone"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-"Nema slobodnih drajvera za vaơu zvučnu karticu (%s), ali postoji vlasnički "
-"drajver na \"%s\"."
+msgid "Botswana"
+msgstr "Bocvana"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "No open source driver"
-msgstr "Nema open source drajver"
+msgid "(default value: %s)"
+msgstr " (default vrijednost: %s)"
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Molimo sačekajte... Primjenjujem konfiguraciju"
+msgid "Alternative test page (Letter)"
+msgstr "Alternativna testna strana (Letter)"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"The old \"%s\" driver is blacklisted.\n"
+"DHCP Server Configuration.\n"
"\n"
-"It has been reported to oops the kernel on unloading.\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-"Stari \"%s\" drajver je na crnoj listi.\n"
+"PodeĆĄavanje DHCP servera.\n"
"\n"
-"Prijavljeno je da ovaj drajver prilikom deinstalacije izaziva oops kernela.\n"
+"Ovdje moĆŸete izabrati različite opcije za podeĆĄavanje DHCP servera.\n"
+"Ako ne znate značenje neke opcije, jednostavno je ostavite kako jeste.\n"
"\n"
-"Stoga će novi drajver \"%s\" biti koriơten tek nakon idućeg pokretanja "
-"sistema."
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Trouble shooting"
-msgstr "Uklanjanje problema"
+msgid "Choose an X server"
+msgstr "Izaberite X server"
-#: ../../harddrake/sound.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
-msgstr ""
-"OSS (Open Sound System) je bio prvi API za zvuk. To je API neovisan od "
-"operativnog sistema (dostupan je na većini UNIX sistema), ali je vrlo "
-"elementaran i ograničen.\n"
-"Pored toga, svi OSS drajveri ponovo izmiơljaju točak.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) je modularizovana arhitektura koja\n"
-"podrĆŸava prilično velik broj ISA, USB i PCI kartica.\n"
-"\n"
-"Ona takođe pruĆŸa mnogo viĆĄi API nego OSS.\n"
-"\n"
-"Da biste koristili ALSA, moĆŸete koristiti:\n"
-"- stari API kompatibilan sa OSSom\n"
-"- novi ALSA API koji pruĆŸa mnoge napredne mogućnosti, ali zahtijeva upotrebu "
-"ALSA biblioteke.\n"
+msgid "Swap partition size in MB: "
+msgstr "Veličina swap particije u MB:"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
+"Other (not drakbackup)\n"
+"keys in place already"
msgstr ""
-"\n"
-"\n"
-"Vaơa kartica trenutno koristi %s \"%s\" drajver (uobičajeni drajver za vaơu "
-"karticu je \"%s\")"
+"Drugi (ne drakbackup)\n"
+"ključevi su već na mjestu"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr ""
-"Ovdje moĆŸete izabrati alternativni drajver (ili OSS ili ALSA) za vaĆĄu zvučnu "
-"karticu (%s)."
+msgid "No changes to backup!"
+msgstr "Nema izmjena na backupu!"
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sound configuration"
-msgstr "PodeĆĄavanje zvuka"
+msgid "Formatted\n"
+msgstr "Formatirana\n"
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
-msgstr ""
-"Nema nijedan poznat OSS/ALSA alternativni drajver za vaơu zvučnu karticu (%"
-"s) koja trenutno koristi \"%s\""
+msgid "Type of install"
+msgstr "Vrsta instalacije"
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No alternative driver"
-msgstr "Nema alternativnog drajvera"
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "Ơtampač \"%s\" na SMB/Windows serveru \"%s\""
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "enable radio support"
-msgstr "uključi radio podrơku"
+msgid ""
+"\n"
+"- Daemon (%s) include:\n"
+msgstr ""
+"\n"
+"- Demon (%s) uključuje :\n"
-#: ../../harddrake/v4l.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Radio support:"
-msgstr "PodrĆĄka za radio:"
+msgid "%d comma separated numbers"
+msgstr "%d brojeva razdvojenih zarezom"
-#: ../../harddrake/v4l.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "PLL setting:"
-msgstr "PLL postavka:"
+msgid ""
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
+msgstr ""
+"Rusers protokol omogućava korisnicima na mreĆŸi da identificiraju\n"
+"ko je prijavljen na ostalim računarima."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr "broj capture buffera za mmap-ovani capture"
+msgid "Automatic Steps Configuration"
+msgstr "Automatska konfiguracija koraka"
-#: ../../harddrake/v4l.pm:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Number of capture buffers:"
-msgstr "Broj capture buffera:"
+msgid ""
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
+msgstr ""
+"Ćœelite li saznati viĆĄe i doprinijeti Open Source zajednici? Uključite se u "
+"svijet Slobodnog softvera!"
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Tuner type:"
-msgstr "Vrsta tunera:"
+msgid "Barbados"
+msgstr "Barbados"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Card model:"
-msgstr "Model kartice:"
+msgid "Please select data to backup..."
+msgstr "Molim izaberite podatke za backup..."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
msgstr ""
-"Za većinu modernih TV kartica, bttv modul Linux kernela automatski "
-"prepoznaje odgovarajuće parametre.\n"
-"Ako je vaĆĄa kartica pogreĆĄno prepoznata, ovdje moĆŸete prisiliti odgovarajući "
-"tip tunera i kartice. Samo izaberite parametre vaĆĄe TV karte."
+"Konekcija nije uspjela.\n"
+"Provjerite konfiguraciju u Mandrake Kontrolnom centru."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Unknown|Generic"
-msgstr "Nepoznat|OpĆĄti"
+msgid "received"
+msgstr "primljeno"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "Nepoznat|CPH06X (bt878) [razni proizvođači]"
+msgid "/File/_New"
+msgstr "/Datoteka/_Nova"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "Nepoznat|CPH05X (bt878) [razni proizvođači]"
+msgid "The DNS Server IP"
+msgstr "IP adresa DNS servera"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detect"
-msgstr "Auto prepoznavanje"
+msgid "IP Range End:"
+msgstr "Kraj IP raspona:"
-#: ../../interactive/newt.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Do"
-msgstr "Uradi"
+msgid "High"
+msgstr "Visok"
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Your choice? (default %s) "
-msgstr "VaĆĄ izbor? (podrazumjevano %s)"
+msgid "NoVideo"
+msgstr "NoVideo"
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "Bad choice, try again\n"
-msgstr "PogreĆĄan izbor, pokuĆĄajte ponovo\n"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "this field describes the device"
+msgstr "Ovo polje opisuje uređaj"
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Re-submit"
-msgstr "Ponovo poĆĄalji"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Dodajem ơtampač u Star Office/OpenOffice.org/GIMP"
-#: ../../interactive/stdio.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Primjetite, label je promijenjena:\n"
-"%s"
+msgid "Local Printers"
+msgstr "Lokalni ơtampači"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Molimo unesite prvi broj od deset koji ĆŸelite izmjeniti,\n"
-"ili samo pritisnite Enter za nastavak.\n"
-"VaĆĄ izbor?"
+msgid "Installation image directory"
+msgstr "Direktorij instalacionog image-a"
-#: ../../interactive/stdio.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Postoji mnogo stvari od kojih moĆŸete izabrati (%s).\n"
+msgid "NIS Server"
+msgstr "NIS server"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "VaĆĄ izbor? (podrazumjevano '%s' %s)"
+msgid "Port: %s"
+msgstr "Port: %s"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid " enter `void' for void entry"
-msgstr " unesite `void' za prazan unos"
+msgid "Spain"
+msgstr "Ć panija"
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Do you want to click on this button?"
-msgstr "Da li ĆŸelite kliknuti na ovo dugme?"
+msgid "This user name has already been added"
+msgstr "Ovo korisničko ime je već dodano"
-#: ../../interactive/stdio.pm:1
+#: ../../interactive.pm:1
#, c-format
-msgid "Button `%s': %s"
-msgstr "Dugme '%s': %s"
+msgid "Choose a file"
+msgstr "Izaberi datoteku"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "VaĆĄ izbor? (0/1, podrazumjevano %s)"
+msgid "Apply"
+msgstr "Primjeni"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Stavke koje morate popuniti:\n"
-"%s"
+msgid "Auto-detect available ports"
+msgstr "Auto prepoznavaj dostupne portove"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Učitavanje modula %s nije uspjelo.\n"
-"Ćœelite li probati opet sa drugim parametrima?"
+msgid "Internet Connection Sharing currently disabled"
+msgstr "Dijeljenje Internet konekcije je trenutno neaktivno"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Specify options"
-msgstr "Navedi opcije"
+msgid "San Marino"
+msgstr "San Marino"
-#: ../../modules/interactive.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Autoprobe"
-msgstr "Ispitivanje"
+msgid "Belgium"
+msgstr "Belgija"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"U nekim slučajevima, %s drajver treba imati dodatne informacije za\n"
-"ispravan rad, iako on obično radi dobro i bez njih. Ćœelite li navesti neke\n"
-"ekstra opcije za njega ili dozvoliti drajveru da ispita vaơ računar za sve\n"
-"informacije koje mu trebaju? Povremeno, ispitivanje moĆŸe zaglaviti računar,\n"
-"ali ne bi trebalo izazvati nikakvu ĆĄtetu."
+msgid "Kuwait"
+msgstr "Kuvajt"
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Koji %s drajver ću pokuơati?"
+msgid "Choose the window manager to run:"
+msgstr "Izaberite window manager koji će se pokretati:"
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Module options:"
-msgstr "Opcije modula"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "sub generation of the cpu"
+msgstr "Podgeneracija procesora"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Sada moĆŸete navesti opcije za modul %s. Opcije su u formatu ``ime=vrijednost "
-"ime2=vrijednost2 ...''.\n"
-"Na primjer, ``io=0x300 irq=7''"
+msgid "First Time Wizard"
+msgstr "Čarobnjak za prvo pokretanje"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
msgstr ""
-"Sada moĆŸete navesti opcije za modul %s.\n"
-"Obratite paĆŸnju da adrese trebate unositi sa prefiksom 0x kao npr. '0x123'"
-
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
+"DoĆĄlo je do greĆĄke, ali ne znam kako da je rijeĆĄim fino.\n"
+"Nastavite na vlastiti rizik."
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instaliram drajver za %s karticu %s"
+msgid "please wait, parsing file: %s"
+msgstr "molim sačekajte, parsiram datoteku: %s"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "See hardware info"
-msgstr "Pogledaj hardware info"
+msgid "Taiwan"
+msgstr "Tajvan"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Imate li ijedan %s interfejs?"
+msgid "Pakistan"
+msgstr "Pakistan"
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do you have another one?"
-msgstr "Imate li neki drugi?"
+msgid ""
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
+msgstr ""
+"Da biste mogli ĆĄtampati sa vaĆĄim Lexmark inkjetom na ovoj konfiguraciji, "
+"potrebni su vam inkjet drajveri za ơtampu koje obezbjeđuje Lexmark (http://"
+"www.lexmark.com/). Kliknite na link \"Drivers\". Zatim izaberite vaĆĄ model a "
+"zatim \"Linux\" kao operativni sistem. Drajveri dolaze u vidu RPM paketa ili "
+"shell skripte sa interaktivnom grafičkom instalacijom. Ne morate obaviti ovu "
+"konfiguraciju na grafičkom interfejsu. Odustanite odmah nakon licencnog "
+"ugovora. Zatim odĆĄtampajte stranice za poravnavanje glava sa "
+"\"lexmarkmaintain\" i podesite opcije poravnanja glave pomoću ovog programa."
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Pronađeno %s %s interfejsa"
+msgid "Permissions"
+msgstr "Privilegije"
-#: ../../modules/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "Ovdje moĆŸete podesiti svaki parametar modula."
+msgid "Provider name (ex provider.net)"
+msgstr "Naziv provajdera (npr. provajder.net)"
-#: ../../modules/parameters.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "comma separated strings"
-msgstr "tekst razdvojen zarezima"
+msgid "Version: %s\n"
+msgstr "Verzija: %s\n"
-#: ../../modules/parameters.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "comma separated numbers"
-msgstr "brojevi razdvojeni zarezom"
+msgid ""
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
+msgstr ""
+"VaĆĄem sistemu ponestaje resursa. MoĆŸda imate neki problem sa instalacijom\n"
+"Mandrake Linuxa. Ako se ovo desi, moĆŸete pokuĆĄati tekstualnu instalaciju. Za "
+"ovo,\n"
+"pritisnite `F1' prilikom bootanja CDROMa, zatim unesite `text'."
-#: ../../modules/parameters.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "%d comma separated strings"
-msgstr "%d stringova razdvojenih zarezom"
+msgid "Use the Windows partition for loopback"
+msgstr "Koristi Windows particiju za loopback"
-#: ../../modules/parameters.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d brojeva razdvojenih zarezom"
+msgid "Armenian (typewriter)"
+msgstr "Armenska (pisaća maơina)"
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "a number"
-msgstr "broj"
+msgid "Connection type: "
+msgstr "Tip konekcije: "
-#: ../../network/adsl.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
-msgstr ""
-"Potreban vam je Alcatel-ov mikrokod.\n"
-"MoĆŸete ga downloadovati na\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"zatim kopirajte mgmt.o u /usr/share/speedtouch"
+msgid "Graphical interface"
+msgstr "Grafički interfejs"
-#: ../../network/adsl.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Najčeơći način za konekciju sa adsl-om je pppoe.\n"
-"Neke konekcije koriste pptp, a vrlo rijetke koriste dhcp.\n"
-"Ako ne znate, izaberite 'koristi pppoe'"
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s sa 3D hardverskim ubrzanjem"
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connect to the Internet"
-msgstr "Spoji se na Internet"
+msgid "India"
+msgstr "Indija"
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Sagem (using pppoa) usb"
-msgstr "Sagem (koristeći pppoa) usb"
+msgid "Chad"
+msgstr "Čad"
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
+msgid "Slovakia"
+msgstr "Slovačka"
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "use dhcp"
-msgstr "koristi dhcp"
+msgid "Singapore"
+msgstr "Singapur"
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "use pptp"
-msgstr "koristi pptp"
+msgid "Cambodia"
+msgstr "Kambođa"
-#: ../../network/adsl.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "use pppoe"
-msgstr "koristi pppoe"
+msgid "Monitor HorizSync: %s\n"
+msgstr "Monitor HorizSync: %s\n"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Other ports"
-msgstr "Ostali portovi"
+msgid "Path"
+msgstr "Staza"
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Everything (no firewall)"
-msgstr "Sve (bez firewalla)"
+msgid ""
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
+msgstr ""
+"Ovdje moĆŸete navesti bilo koju komandnu liniju kojoj će biti prosljeđen "
+"zadatak umjesto direktnog slanja na ơtampač."
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
msgstr ""
-"Zadan je neispravan port: %s.\n"
-"Odgovarajući format je \"port/tcp\" ili \"port/udp\", \n"
-"gdje je \"port\" cijeli broj između 1 i 65535."
+"Sistem za ơtampu (%s) se neće pokrenuti automatski prilikom boota računara.\n"
+"\n"
+"Moguće je da je automatsko pokretanje isključeno prilikom promjene na viơi "
+"nivo sigurnosni, poơto je sistem za ơtampu moguća tačka napada.\n"
+"\n"
+"Da li ĆŸelite da ponovo uključite automatsko pokretanje sistema za ĆĄtampu?"
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
+"Printer %s\n"
+"What do you want to modify on this printer?"
msgstr ""
-"MoĆŸete unijeti raze portove. \n"
-"Primjeri ispravnih unosa su: 139/tcp 139/udp.\n"
-"Pogledajte datoteku /etc/services za viĆĄe informacija."
+"Ơtampač %s\n"
+"Ć ta ĆŸelite da izmjenite na ovom ĆĄtampaču?"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr "Kojim servisima ĆŸelite dozvoliti pristup sa Interneta?"
+msgid "Add host"
+msgstr "Dodaj računar"
-#: ../../network/drakfirewall.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"drakfirewall configurator\n"
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
+"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
-"drakfirewall podeơivač\n"
+"Ako stvarno mislite da znate koji drajver je odgovarajući za vaơu karticu\n"
+"moĆŸete odabrati jedan sa gornje liste.\n"
"\n"
-"Prije nego ĆĄto nastavite, provjerite da li ste ispravno podesili pristup\n"
-"mreĆŸi/Internetu pomoću alata drakconnect."
+"Trenutni drajver za vaơu \"%s\" zvučnu karticu je \"%s\""
-#: ../../network/drakfirewall.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"drakfirewall configurator\n"
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
+"\"Custom\" permit a per-user granularity.\n"
msgstr ""
-"drakfirewall podeơavač\n"
+"Ćœelite li dozvoliti korisnicima da dijele (share) neke od njihovih "
+"direktorija?\n"
+"Ako uključite ovu opciju, korisnici će moći jednostavno kliknuti na opciju "
+"\"Share\" u\n"
+"Konqueroru ili Nautilusu.\n"
"\n"
-"On podeơava lični firewall za ovaj Mandrake Linux računar.\n"
-"Za moćnu soluciju posebnog firewalla, molimo pogledajte\n"
-"specijaliziranu MandrakeSecurity Firewall distribuciju."
-
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "No network card"
-msgstr "Nema mreĆŸne kartice"
-
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "POP and IMAP Server"
-msgstr "POP i IMAP server"
-
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "Mail Server"
-msgstr "Mail server"
-
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "Domain Name Server"
-msgstr "DNS server"
-
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "Web Server"
-msgstr "Web server"
-
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr "Zeroconf ime računara ne smije sadrĆŸavati ."
-
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
-msgid "Host name"
-msgstr "Host name"
-
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
-msgid "Zeroconf Host name"
-msgstr "Zeroconf Ime računara"
+"\"Prilagođeno\" vam omogućuje da podesite ovu opciju zasebno za svakog "
+"korisnika.\n"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"\n"
-"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
msgstr ""
-"\n"
-"\n"
-"Unesite Zeroconf ime računara bez tačaka ako ne ĆŸelite\n"
-"da koristite ponuđeno ime računara."
+"Molimo izaberite učitaj ili spasi izbor paketa na disketu.\n"
+"Format je isti kao i diskete koje generiĆĄe auto_install."
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Configuring network"
-msgstr "PodeĆĄavam mreĆŸu"
+msgid "China (broadcast)"
+msgstr "Kina (broadcast)"
-#: ../../network/ethernet.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
-msgstr ""
-"Molimo izaberite koji mreĆŸni adapter ĆŸelite koristiti za spajanje na Internet"
+msgid "Use quota for backup files."
+msgstr "Koristi quotu za backup datoteke."
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the network interface"
-msgstr "Izaberite mreĆŸni interface"
+msgid "Configuring printer \"%s\"..."
+msgstr "Podeơavam ơtampač \"%s\"..."
-#: ../../network/ethernet.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Nije pronađen ethernet mreĆŸni adapter na vaĆĄem sistemu.\n"
-"Ne mogu podesiti ovu vrstu konekcije."
+msgid "Internet connection"
+msgstr "Internet konekcija"
-#: ../../network/ethernet.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
msgstr ""
-"Koji dhcp klijent ĆŸelite koristiti?\n"
-"Podrazumjevani je dhcp-client"
+"Učitavanje modula %s nije uspjelo.\n"
+"Ćœelite li probati opet sa drugim parametrima?"
-#: ../../network/isdn.pm:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Nije pronađena nijedna ISDN PCI kartica. Molimo izaberite jednu na idućem "
-"ekranu."
+msgid "Welcome to the Open Source world."
+msgstr "Dobro doĆĄli u svijet otvorenog izvornog koda."
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Bosnia and Herzegovina"
+msgstr "Bosna i Hercegovina"
+
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
msgstr ""
-"Otkrio sam neku ISDN PCI karticu, ali ne znam tip. Molimo izaberite neku PCI "
-"karticu na idućem ekranu."
+"Potreban vam je pravi file sistem (ext2/ext3, reiserfs, xfs ili jfs) za ovu "
+"tačku montiranja\n"
-#: ../../network/isdn.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Koja od navedenih je vaĆĄa ISDN kartica?"
+msgid "You must enter a host name or an IP address.\n"
+msgstr "Morate unijeti ime računara ili IP.\n"
-#: ../../network/isdn.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "ISDN Configuration"
-msgstr "PodeĆĄavanje ISDNa"
+msgid "Netherlands"
+msgstr "Nizozemska"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Abort"
-msgstr "Prekid"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "Ć aljem datoteke..."
#: ../../network/isdn.pm:1
#, c-format
-msgid "Continue"
-msgstr "Nastavak"
+msgid "Internal ISDN card"
+msgstr "Interna ISDN kartica"
-#: ../../network/isdn.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
msgstr ""
-"\n"
-"Ako imate ISA karticu, vrijednosti na idućem ekranu bi trebale biti "
-"ispravne.\n"
-"\n"
-"Ako imate PCMCIA karticu, moraćete znati IRQ i IO vaơe kartice.\n"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "I don't know"
-msgstr "Ne znam"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "PCI"
-msgstr "PCI"
+"Nema nijedan poznat OSS/ALSA alternativni drajver za vaơu zvučnu karticu (%"
+"s) koja trenutno koristi \"%s\""
-#: ../../network/isdn.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "Title"
+msgstr "Naslov"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "What kind of card do you have?"
-msgstr "Koju vrstu kartice imate?"
+msgid "Install & convert Fonts"
+msgstr "Instaliraj i konvertuj fontove"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr "PronaĆĄao sam interfejs \"%s\". Ćœelite li ga koristiti ?"
+msgid "WARNING"
+msgstr "UPOZORENJE"
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Koji protokol ĆŸelite koristiti?"
+msgid "Installing bootloader"
+msgstr "Instaliram bootloader"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Protokol za ostatak svijeta"
+msgid "replay"
+msgstr "ponovi"
-#: ../../network/isdn.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-"Protokol za ostatak svijeta \n"
-" bez D-kanala (iznajmljene linije)"
+msgid "detected %s"
+msgstr "detektovan %s"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "European protocol"
-msgstr "Evropski protokol"
+msgid "Virgin Islands (U.S.)"
+msgstr "Djevičanska ostrva (SAD)"
-#: ../../network/isdn.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Evropski protokol (EDSS1)"
+msgid "Bad backup file"
+msgstr "LoĆĄa backup datoteka"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"Izaberite vaĆĄeg providera.\n"
-" Ako nije na listi, izaberite Nije na listi"
+"Dijeljenje Internet konekcije je već podeơeno. Trenutno je\n"
+"neaktivno (isključeno).\n"
+"\n"
+"Ć ta ĆŸelite uraditi?"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "External ISDN modem"
-msgstr "Vanjski ISDN modem"
+msgid "Enter IP address and port of the host whose printers you want to use."
+msgstr "Unesite IP adresu i port računara čije ĆĄtampače ĆŸelite koristiti."
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internal ISDN card"
-msgstr "Interna ISDN kartica"
+msgid "Pipe into command"
+msgstr "Spoji (pipe) na komandu"
-#: ../../network/isdn.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "Koje je vrste vaĆĄa ISDN konekcija?"
+msgid ""
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
+msgstr ""
+"Neki dio hardware-a na vaơem računaru zahtjeva ``vlasničke'' drajvere za "
+"rad.\n"
+"MoĆŸete naći viĆĄe podataka o njima na: %s"
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Network Configuration Wizard"
-msgstr "Čarobnjak za podeĆĄavanje mreĆŸe"
+msgid "Detecting devices..."
+msgstr "Prepoznajem uređaje..."
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "Stara konfiguracija (isdn4net)"
+msgid "Click here to launch the wizard ->"
+msgstr "Kliknite ovdje za pokretanje čarobnjaka ->"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "New configuration (isdn-light)"
-msgstr "Nova konfiguracija (isdn-light)"
+msgid "Haiti"
+msgstr "Haiti"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
+"Description of the fields:\n"
"\n"
-"We recommand the light configuration.\n"
msgstr ""
-"Koju ISDN konfiguraciju ĆŸelite?\n"
-"\n"
-"* Stara konfiguracija koristi isdn4net. On sadrĆŸi moćne alate,\n"
-" ali ga je teĆĄko podesiti i nije standardiziran.\n"
-"\n"
-"* Novu konfiguraciju je lakĆĄe razumjeti, standardnija je,\n"
-" ali ima manje alata.\n"
+"Opis polja:\n"
"\n"
-"Preporučujemo light konfiguraciju.\n"
-#: ../../network/modem.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Do nothing"
-msgstr "Nemoj raditi niĆĄta"
+msgid "the name of the CPU"
+msgstr "naziv procesora"
-#: ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Install rpm"
-msgstr "Instaliraj RPM"
+msgid "Refreshing printer data..."
+msgstr "OsvjeĆŸavam podatke o ĆĄtampaču..."
-#: ../../network/modem.pm:1
+#: ../../install2.pm:1
#, c-format
-msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
-msgstr ""
-"Otkrio sam winmodem baziran na \"%s\" chipsetu, ĆŸelite li instalirati "
-"odgovarajući software ?"
+msgid "You must also format %s"
+msgstr "Morate takođe formatirati i %s"
-#: ../../network/modem.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Title"
-msgstr "Naslov"
+msgid "Be careful: this operation is dangerous."
+msgstr "Budite oprezni: ova operacija je opasna."
-#: ../../network/modem.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
-msgstr ""
-"VaĆĄ modem nije podrĆŸan pod ovim sistemom.\n"
-"Pogledajte http://www.linmodems.org"
+msgid "Insert a floppy containing package selection"
+msgstr "Ubacite disketu koja sadrĆŸi izbor paketa"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Drugi DNS server (opcionalno)"
+msgid "Server: "
+msgstr "Server:"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Prvi DNS server (opcionalno)"
+msgid "Security Alerts:"
+msgstr "Sigurnosna upozorenja:"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Domain name"
-msgstr "Ime domena"
+msgid "Sweden"
+msgstr "Ć vedska"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "CHAP"
-msgstr "CHAP"
+msgid "Use Expect for SSH"
+msgstr "Koristi Expect za SSH"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Script-based"
-msgstr "Skripta"
+msgid "Poland"
+msgstr "Poljska"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Terminal-based"
-msgstr "Terminal"
+msgid "Importance: %s\n"
+msgstr "Značaj: %s\n"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr "Molim uključite ako ĆŸelite izbaciti traku nakon backupa."
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Login ID"
-msgstr "Login ID"
+msgid "Other ports"
+msgstr "Ostali portovi"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Phone number"
-msgstr "Broj telefona"
+msgid "number of capture buffers for mmap'ed capture"
+msgstr "broj capture buffera za mmap-ovani capture"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Connection name"
-msgstr "Naziv konekcije"
+msgid "SMBus controllers"
+msgstr "SMBus kontroleri"
-#: ../../network/modem.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Dialup options"
-msgstr "Opcije dialupa"
+msgid "Connection timeout (in sec)"
+msgstr "Timeout konekcije (u sek.)"
-#: ../../network/modem.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Molimo izaberite na koji serijski port je nakačen vaơ modem."
+msgid ""
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
+msgstr "Neki rani i486DX-100 chipovi "
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Network Configuration"
-msgstr "PodeĆĄavanje mreĆŸe"
+msgid "Croatian"
+msgstr "Hrvatska"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Use existing partition"
+msgstr "Koristi postojeću particiju"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
-msgstr ""
-"DoĆĄlo je do problema prilikom podeĆĄavanja.\n"
-"Provjerite vaơu konekciju pomoću net_monitor ili mcc. Ako vaơa konekcija ne "
-"radi, moĆŸete ponovo pokrenuti podeĆĄavanje"
+msgid "Unable to contact mirror %s"
+msgstr "Ne mogu pristupiti mirroru %s"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Nakon ơto je to gotovo, preporučujemo da restartujete vaơ X\n"
-"okoliơ kako bi se izbjegao problem sa promjenom naziva računara."
+msgid "/Help/_About..."
+msgstr "/Pomoć/_O programu..."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Čestitamo, podeĆĄavanje mreĆŸe i interneta je zavrĆĄeno.\n"
-"\n"
-"Sada će ova konfiguracija biti primjenjena na vaơ sistem.\n"
+msgid "Remove user directories before restore."
+msgstr "Pobriơi korisničke direktorije prije vraćanja."
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
msgstr ""
-"DoĆĄlo je do problema prilikom restartovanja mreĆŸe:\n"
-"\n"
-"%s"
+"Sada ćete podesiti udaljeni ĆĄtampač. Ovo zahtjeva aktivan pristup mreĆŸi, ali "
+"vaĆĄa mreĆŸa joĆĄ uvijek nije podeĆĄena. Ako ĆŸelite nastaviti bez podeĆĄavanja "
+"mreĆŸe, nećete moći koristiti ĆĄtampač koji sada podeĆĄavate. Kako ĆŸelite da "
+"nastavimo?"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr "Potrebno je restartovati mreĆŸu. Ćœelite li je restartovati?"
+msgid "CUPS printer configuration"
+msgstr "Podeơavanje CUPS ơtampača"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Network configuration"
-msgstr "PodeĆĄavanje mreĆŸe"
+msgid "could not find any font in your mounted partitions"
+msgstr "ne mogu naći nijedan font na montiranim particijama"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Da li ĆŸelite pokrenuti konekciju prilikom boota?"
+msgid "F00f bug"
+msgstr "F00F bug"
-#: ../../network/netconnect.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Internet connection"
-msgstr "Internet konekcija"
+msgid "XFree %s"
+msgstr "XFree %s"
-#: ../../network/netconnect.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
msgstr ""
-"Podesili ste nekoliko načina za konekciju na Internet.\n"
-"Izaberite jedan od njih koji ćete koristiti.\n"
-"\n"
+"Koji dhcp klijent ĆŸelite koristiti?\n"
+"Podrazumjevani je dhcp-client"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Izaberite konekciju koju ĆŸelite podesiti"
+msgid "Domain Name:"
+msgstr "Ime domena:"
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "ethernet card(s) detected"
-msgstr "prepoznata ethernet kartica(e)"
+msgid "On Floppy"
+msgstr "Na disketi"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LAN connection"
-msgstr "LAN konekcija"
+msgid "Restore"
+msgstr "Vrati"
-#: ../../network/netconnect.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "cable connection detected"
-msgstr "otkrivena kablovska konekcija"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
+msgstr ""
+"ako je postavljeno na da, provjerava da li su mreĆŸni uređaji u "
+"promiskuitetnom modu."
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Cable connection"
-msgstr "Kablovska konekcija"
+msgid "Looking for available packages..."
+msgstr "TraĆŸim dostupne pakete..."
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "detected"
-msgstr "detektovan"
+msgid "Init Message"
+msgstr "Init poruka"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "ADSL connection"
-msgstr "ADSL konekcija"
+msgid "Rescue partition table"
+msgstr "Spasi tabelu particija"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "detected %s"
-msgstr "detektovan %s"
+msgid "Connection complete."
+msgstr "Konekcija zavrĆĄena."
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "ISDN connection"
-msgstr "ISDN konekcija"
+msgid "Cyprus"
+msgstr "Kipar"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Winmodem connection"
-msgstr "Winmodem konekcija"
+msgid "Remove from RAID"
+msgstr "Ukloni sa RAIDa"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "detected on port %s"
-msgstr "detektovan na portu %s"
+msgid "This encryption key is too simple (must be at least %d characters long)"
+msgstr ""
+"Ovaj ključ enkripcije je previơe jednostavan (mora imati najmanje %d "
+"karaktera)"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Configuration Wizards"
+msgstr "Čarobnjaci za podeơavanje"
#: ../../network/netconnect.pm:1
#, c-format
-msgid "Normal modem connection"
-msgstr "Normalna modemska konekcija"
+msgid "ISDN connection"
+msgstr "ISDN konekcija"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Detecting devices..."
-msgstr "Prepoznajem uređaje..."
+msgid "primary"
+msgstr "primarni"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Expert Mode"
-msgstr "Ekspertni mod"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr "na SMB/Windows serveru \"%s\", share \"%s\""
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
+"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
+"\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
+msgstr ""
+"Ovim dijalogom moĆŸete izabrati koje servise ĆŸelite pokretati prilikom "
+"boota.\n"
+"\n"
+"Ovdje su predstavljeni svi servisi koji su dostupni u trenutnoj\n"
+"instalaciji. Pregledajte ih paĆŸljivo i isključite sve one koji nisu "
+"potrebni\n"
+"prilikom boota.\n"
+"\n"
+"Kada izaberete servis dobićete kratki tekst koji objaơnjava taj servis\n"
+"Ipak, ako niste sigurni da li je servis koristan ili ne, sigurnije je da ne\n"
+"mijenjate predloĆŸeni izbor.\n"
+"\n"
+"!! Budite vrlo paĆŸljivi sa ovim korakom ako namjeravate koristiti vaĆĄ "
+"računar\n"
+"kao server: vjerovatno ne ĆŸelite da pokrenete neke servise koji vam ne\n"
+"trebaju. Molimo vas da zapamtite da pojedini servisi mogu biti opasni\n"
+"ako su aktivni na serveru. Općenito, izaberite samo one servise koji vam\n"
+"stvarno trebaju. !!"
+
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use auto detection"
-msgstr "Koristi auto prepoznavanje"
+msgid "Skip"
+msgstr "Preskoči"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose the profile to configure"
-msgstr "Izaberite profil za podeĆĄavanje"
+msgid "Niue"
+msgstr "Niue"
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
msgstr ""
-"Dobro doĆĄli u Čarobnjak za podeĆĄavanje mreĆŸe\n"
-"\n"
-"Sada ćemo podesiti vaĆĄu internet/mreĆŸnu konekciju.\n"
-"Ako ne ĆŸelite da koristite automatsko prepoznavanje, isključite opciju.\n"
+"Aktivira/deaktivira sve mreĆŸne interfejse koji su konfigurisani\n"
+"za pokretanje tokom boota."
-#: ../../network/netconnect.pm:1
-#, c-format
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
msgstr ""
-"PoĆĄto radite mreĆŸnu instalaciju, vaĆĄa mreĆŸa je već podeĆĄena.\n"
-"Kliknite na Ok da zadrĆŸite tu konfiguraciju ili Odustani za podeĆĄavanje vaĆĄe "
-"Internet & MreĆŸne konekcije.\n"
+"Frekvencija CPUa u MHz (Megaherc je jedinica koja se moĆŸe pribliĆŸno "
+"usporediti sa brojem instrukcija koje CPU izvrĆĄava u sekundi)"
-#: ../../network/netconnect.pm:1
+#: ../../pkgs.pm:1
+#, c-format
+msgid "important"
+msgstr "vaĆŸno"
+
+#: ../../standalone/drakbackup:1
#, c-format
+msgid "Total Progress"
+msgstr "Ukupan napredak"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
"\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
msgstr ""
+"DrakX će najprije potraĆŸiti sve IDE uređaje prisutne na vaĆĄem računaru. "
+"Također\n"
+"će pretraĆŸiti sistem za jednu ili viĆĄe PCI SCSI kartica. Ako SCSI kartica "
+"bude\n"
+"pronađena, DrakX će automatski instalirati odgovarajući drajver.\n"
"\n"
+"Budući da pronalaĆŸenje hardware-a nikad nije savrĆĄeno, DrakX moĆŸda neće\n"
+"pronaći vaơe hard diskove. Ako se to desi, moraćete ih navesti ručno.\n"
"\n"
+"Ako je potrebno da ručno odaberete PCI SCSI adapter, DrakX će vas pitati\n"
+"da li ĆŸelite navesti neke opcije za njega. Trebate dopustiti DrakXu da "
+"ispita\n"
+"hardware za neke opcije specifične za tu karticu. Ovo obično radi dobro.\n"
"\n"
-"Sada ćemo podesiti konekciju %s.\n"
-"\n"
-"\n"
-"Pritisnite OK za nastavak."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Sada ćemo podesiti konekciju %s."
+"Ako DrakX ne moĆŸe ispitati opcije koje trebaju biti proslijeđene, moraćete\n"
+"ručno navesti opcije za drajver."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Internet connection & configuration"
-msgstr "Internet konekcija & podeĆĄavanje"
+msgid "Users"
+msgstr "Korisnici"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configure the connection"
-msgstr "Podesi konekciju"
+msgid "Aruba"
+msgstr "Aruba"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Disconnect"
-msgstr "Prekini konekciju"
+msgid "Preparing bootloader..."
+msgstr "Pripremam bootloader..."
-#: ../../network/netconnect.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Connect"
-msgstr "Konektuj me"
+msgid "Gateway (e.g. %s)"
+msgstr "Gateway (tj. %s)"
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"MoĆŸete prekonfigurisati vaĆĄu konekciju."
+msgid "The passwords do not match"
+msgstr "Ć ifre se ne poklapaju"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"MoĆŸete se spojiti na Internet ili prekonfigurisati vaĆĄu konekciju."
+msgid "Examples for correct IPs:\n"
+msgstr "Primjeri ispravnih IPa:\n"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "Trenutno niste konektovani na Internet."
+msgid "Frequency (MHz)"
+msgstr "Frekvencija (MHz)"
-#: ../../network/netconnect.pm:1
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
msgstr ""
-"\n"
-"MoĆŸete se diskonektovati ili prekonfigurisati vaĆĄu konekciju."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "You are currently connected to the Internet."
-msgstr "Trenutno ste spojeni na Internet."
+"Da koristite ovaj izbor spaĆĄenih paketa, bootajte instalaciju sa ``linux "
+"defcfg=floppy''"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "URL treba počinjati sa 'ftp:' ili 'http:'"
+msgid "the number of the processor"
+msgstr "broj procesora"
-#: ../../network/network.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Proxy should be http://..."
-msgstr "Proxy treba biti http://..."
+msgid "Hardware clock set to GMT"
+msgstr "Hardverski sat podeĆĄen na GMT"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "FTP proxy"
-msgstr "FTP proxy"
+msgid "Give a file name"
+msgstr "Dajte naziv datoteke"
-#: ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
+msgid "Please choose the port that your printer is connected to."
+msgstr "Molimo izaberite na koji port je priključen vaơ ơtampač."
-#: ../../network/network.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "Proxies configuration"
-msgstr "Konfiguracija proxija"
+msgid "Change Cd-Rom"
+msgstr "Promijenite CD-ROM"
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "Gateway adresa treba biti u formatu 1.2.3.4"
+msgid "Paraguay"
+msgstr "Paragvaj"
-#: ../../network/network.pm:1
-#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "Adresa DNS servera treba biti u formatu 1.2.3.4"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
+msgstr "Koristi inkrementalni backup (nemoj prebrisati stare backupe)"
-#: ../../network/network.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Gateway device"
-msgstr "Gateway uređaj"
+msgid "There's no known driver for your sound card (%s)"
+msgstr "Nema poznatih drajvera za vaơu zvučnu karticu (%s)"
-#: ../../network/network.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (tj. %s)"
+msgid "force"
+msgstr "prisili"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DNS server"
-msgstr "DNS server"
+msgid "Exit"
+msgstr "Izlaz"
-#: ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
msgstr ""
-"Molimo unesite naziv vaơeg računara ako ga znate.\n"
-"Naziv vaơeg računara bi trebao biti puno-kvalifikovani naziv,\n"
-"kao ĆĄto je ``mojcomp.mojlab.mojafirma.com''.\n"
-"MoĆŸete također unijeti IP adresu gateway-a ako ga imate"
+"NAPOMENA: Ovisno o modelu ơtampača i sistemu ơtampe, biće instalirano do %d "
+"MB dodatnog softvera."
-#: ../../network/network.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
msgstr ""
-"Brzina bi trebala imati zavrĆĄetak k, M ili G (na primjer, \"11M\" za 11M) "
-"ili dodajte odgovarajući broj nula (0)."
+"Nemate nijedan podeĆĄen interfejs.\n"
+"Podesite ih prvo klikajući na 'Podesi'"
-#: ../../network/network.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
-msgstr ""
-"Frekvencija bi trebala imati zavrĆĄetak k, M ili G (na primjer, \"2.46G\" za "
-"frekvenciju 2.46 GHz) ili dodajte odgovarajući broj nula (0)."
+msgid "Estonian"
+msgstr "Estonska"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresa treba biti u formatu 1.2.3.4"
+msgid ""
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
+msgstr ""
+"Apache je World Wide Web server. Koristi se za posluĆŸivanje HTML\n"
+"datoteka i CGI skripti."
-#: ../../network/network.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Start at boot"
-msgstr "Pokreni na bootu"
+msgid "Add/Del Clients"
+msgstr "Dodaj/obriĆĄi klijente"
-#: ../../network/network.pm:1
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Odredi ime računara iz DHCP adrese"
+msgid "Choose the network interface"
+msgstr "Izaberite mreĆŸni interface"
-#: ../../network/network.pm:1
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Network Hotplugging"
-msgstr "Network Hotplugging"
+msgid "Unknown Model"
+msgstr "Nepoznat model"
-#: ../../network/network.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "Otkrij id mreĆŸne karte (korisno za laptope)"
+msgid "CD/DVD burners"
+msgstr "CD/DVD prĆŸilica"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DHCP host name"
-msgstr "DHCP ime računara"
+msgid ""
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"Particija koja se boota po defaultu\n"
+" (za MS-DOS boot, ne za lilo)\n"
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Netmask"
-msgstr "Netmask"
+msgid "choose image"
+msgstr "izaberite image"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "IP address"
-msgstr "IP adresa"
+msgid "Firewalling configuration detected!"
+msgstr "Otkrivena konfiguracija firewalla!"
-#: ../../network/network.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp/zeroconf)"
+msgid "Connection name"
+msgstr "Naziv konekcije"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Automatic IP"
-msgstr "Automatska IP"
+msgid ""
+"x coordinate of text box\n"
+"in number of characters"
+msgstr ""
+"x koordinata tekst polja\n"
+"u broju znakova"
-#: ../../network/network.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid " (driver %s)"
-msgstr " (drajver %s)"
+msgid "Updating package selection"
+msgstr "OsvjeĆŸavam izbor paketa"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configuring network device %s"
-msgstr "PodeĆĄavam mreĆŸni uređaj %s"
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "Gdje ĆŸelite montirati loopback datoteku %s?"
-#: ../../network/network.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
msgstr ""
-"Molimo unesite IP konfiguraciju za ovaj računar.\n"
-"Svaka stavka bi trebala biti unesena kao IP adresa u decimalnoj notaciji\n"
-"razdvojenoj tačkama (npr. 1.2.3.4)."
+"Disketa je uspjeĆĄno napravljena.\n"
+"Sada moĆŸete ponoviti vaĆĄu instalaciju."
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"UPOZORENJE: Ovaj uređaj je prethodno podeơen za konekciju na Internet.\n"
-"Samo prihvatite kako bi ovaj uređaj ostao podeơen.\n"
-"Izmjena polja ispod će prepisati ovu konfiguraciju."
+msgid "the number of buttons the mouse has"
+msgstr "broj dugmadi koje ima miĆĄ"
-#: ../../network/shorewall.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
msgstr ""
-"Upozorenje! Pronađena je postojeća konfiguracija firewalla. MoĆŸda će biti "
-"potrebno neko ručno podeơavanje nakon instalacije."
-
-#: ../../network/shorewall.pm:1
-#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Otkrivena konfiguracija firewalla!"
+"Molimo unesite direktorij (ili modul) za\n"
+" smjeơtaj backupa na ovom računaru."
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Account Password"
-msgstr "Ć ifra naloga"
+msgid "Replay"
+msgstr "Ponovi"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Account Login (user name)"
-msgstr "Login naloga (korisničko ime)"
+msgid "Backup other files"
+msgstr "Backup ostalih datoteka"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Timeout konekcije (u sek.)"
+msgid "No floppy drive available"
+msgstr "Nema pogodne disketne jedinice"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Connection speed"
-msgstr "Brzina konekcije"
+msgid "Backup files are corrupted"
+msgstr "Backup datoteke su oơtećene"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Dialing mode"
-msgstr "Način biranja broja"
+msgid "TV norm:"
+msgstr "TV standard :"
-#: ../../network/tools.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Choose your country"
-msgstr "Izaberite vaĆĄu drĆŸavu"
+msgid "Cpuid family"
+msgstr "Cpuid familija"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "Provider dns 2 (opcionalno)"
+msgid "32 MB"
+msgstr "32 MB"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "Provider dns 1 (opcionalno)"
+msgid "Lithuanian AZERTY (new)"
+msgstr "Litvanska AZERTY (nova)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Provider phone number"
-msgstr "Broj telefona provajdera"
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgstr "da znači da aritmetički koprocesor ima priključen exception vector"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Naziv provajdera (npr. provajder.net)"
+msgid ""
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
+msgstr ""
+"Izabrali ste softversku RAID particiju kao root (/).\n"
+"Nijedan bootloader nije u mogućnosti da rukuje sa ovim bez /boot particije.\n"
+"Molim kasnije dodajte /boot particiju"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Your personal phone number"
-msgstr "Vaơ lični broj telefona"
+msgid "Previous"
+msgstr "Prethodni"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "Card IO_1"
-msgstr "IO_1 kartice"
+msgid "Other OS (MacOS...)"
+msgstr "Ostali OSi (MacOS...)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Card IO_0"
-msgstr "IO_0 kartice"
+msgid "To activate the mouse,"
+msgstr "Da biste aktivirali miĆĄa,"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Card IO"
-msgstr "IO kartice"
+msgid "Bringing up the network"
+msgstr "Pokrećem mreĆŸu"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../common.pm:1
#, c-format
-msgid "Card mem (DMA)"
-msgstr "Memorija kartice (DMA)"
+msgid "Screenshots will be available after install in %s"
+msgstr "Snimanje ekrana će biti dostupno nakon ơto instalirate u %s"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Card IRQ"
-msgstr "IRQ kartice"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
+msgstr ""
+"Na vaĆĄem hard disku ustanovljeno je viĆĄe od jedne Microsoft particije.\n"
+"Molim izaberite onu koju ĆŸelite smanjiti kako biste instalirali vaĆĄ "
+"Mandrake\n"
+"Linux operativni sistem.\n"
+"\n"
+"Svaka particija je navedena ovako: \"Linux ime\", \"Windows ime\",\n"
+"\"Kapacitet\".\n"
+"\n"
+"\"Linux ime\" se sastoji od: \"vrste hard diska\", \"broja hard diska\",\n"
+"\"broja particije\" (na primjer, \"hda1\").\n"
+"\n"
+"\"Vrsta hard diska\" je \"hd\" ako je vaĆĄ hard disk IDE, a \"sd\" ako je\n"
+"u pitanju SCSI hard disk.\n"
+"\n"
+"\"Broj hard diska\" je uvijek slovo nakon \"hd\" ili \"sd\". Kod IDE hard\n"
+"diskova:\n"
+"\n"
+" * \"a\" znači \"master hard disk na primarnom IDE kontroleru\";\n"
+"\n"
+" * \"b\" znači \"slave hard disk na primarnom IDE kontroleru\";\n"
+"\n"
+" * \"c\" znači \"master hard disk na sekundarnom IDE kontroleru\";\n"
+"\n"
+" * \"d\" znači \"slave hard disk na sekundarnom IDE kontroleru\";\n"
+"\n"
+"Kod SCSI hard diskova, \"a\" je \"disk sa najniĆŸim SCSI IDom\", \"b\"\n"
+"je \"drugi najniĆŸi SCSI ID\", itd.\n"
+"\n"
+"\"Windows ime\" je slovo kojim je vaơ hard disk označen pod Windowsom\n"
+"(prva particija prvog diska se zove \"C:\")."
-#: ../../network/tools.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please fill or check the field below"
-msgstr "Molimo ispunite ili provjerite polje ispod"
+msgid "Tanzania"
+msgstr "Tanzanija"
-#: ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Connection Configuration"
-msgstr "PodeĆĄavanje konekcije"
+msgid "Computing FAT filesystem bounds"
+msgstr "Izračunavam granice FAT filesistema"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+"\n"
+"Backup Sources: \n"
msgstr ""
-"Izgleda da sistem nije spojen na Internet.\n"
-"Probajte promijeniti postavke vaĆĄe konekcije."
+"\n"
+"Izvori backup-a: \n"
-#: ../../network/tools.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Iz sigurnosnih razloga, sada će biti odspojen."
+msgid "Content of the file"
+msgstr "SadrĆŸaj datoteke"
-#: ../../network/tools.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Sistem je sada spojen na Internet."
+msgid "Authentication LDAP"
+msgstr "Autentikacijski LDAP"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Testing your connection..."
-msgstr "Probavam vaĆĄu konekciju..."
+msgid "Let me pick any driver"
+msgstr "Dozvoli da odaberem bilo koji drajver"
-#: ../../network/tools.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Da li se ĆŸelite pokuĆĄati spojiti na Internet sada?"
+msgid "Profile "
+msgstr "Profil"
-#: ../../network/tools.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Internet configuration"
-msgstr "Internet konfiguracija"
+msgid "transmitted"
+msgstr "poslano"
-#: ../../partition_table/raw.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
-msgstr ""
-"NeĆĄto loĆĄe se deĆĄava na vaĆĄem disku. \n"
-"Test integriteta podataka nije uspio. \n"
-"To znači će da pisanje bilo čega na disk rezultirati smećem."
+msgid "Palestine"
+msgstr "Palestina"
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid " (Default)"
-msgstr " (Default)"
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
-#: ../../printer/cups.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Na CUPS serveru \"%s\""
+msgid "%d comma separated strings"
+msgstr "%d stringova razdvojenih zarezom"
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Remote Printers"
-msgstr "Udaljeni ơtampači"
+msgid "Here is the full list of keyboards available"
+msgstr "Ovdje je puna lista svih dostupnih tastatura"
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "CUPS"
-msgstr "CUPS"
+msgid "Theme name"
+msgstr "Naziv teme"
-#: ../../printer/cups.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "(on this machine)"
-msgstr "(na ovom računaru)"
+msgid "/_Help"
+msgstr "/_Pomoć"
-#: ../../printer/cups.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "(on %s)"
-msgstr "(na %s)"
+msgid ""
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
+"Ovdje moĆŸete izabrati da li skeneri spojeni na ovaj računar trebaju biti "
+"dostupni udaljenim računarima i kojim računarima."
-#: ../../printer/data.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
+msgid "the width of the progress bar"
+msgstr "ĆĄirina progresne trake"
-#: ../../printer/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LPRng"
-msgstr "LPRng"
+msgid "Cook Islands"
+msgstr "Cook ostrva"
-#: ../../printer/data.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
+msgid "Formatting partition %s"
+msgstr "Formatiram particiju %s"
-#: ../../printer/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LPD"
-msgstr "LPD"
+msgid "Hostname required"
+msgstr "Potrebno ime računara"
-#: ../../printer/data.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
+msgid "Unselect fonts installed"
+msgstr "Isključi instalirane fontove"
-#: ../../printer/data.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "PDQ"
-msgstr "PDQ"
+msgid "Cancel"
+msgstr "Odustani"
-#: ../../printer/data.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
+msgid "Searching for configured scanners ..."
+msgstr "TraĆŸim podeĆĄene skenere ..."
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Unknown Model"
-msgstr "Nepoznat model"
+msgid "Wheel"
+msgstr "Točkić"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Unknown model"
-msgstr "Nepoznat model"
+msgid "Videocard"
+msgstr "Video kartica"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "%s (Port %s)"
-msgstr "%s (Port %s)"
+msgid "\tBackups use tar and bzip2\n"
+msgstr "\tBackupi koriste tar i bzip2\n"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "Host %s"
-msgstr "Računar %s"
+msgid "Remove Selected"
+msgstr "Ukloni izabrano"
-#: ../../printer/main.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Network %s"
-msgstr "MreĆŸa %s"
+msgid "/Autodetect _modems"
+msgstr "/Automatski prepoznaj _modeme"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Interface \"%s\""
-msgstr "Interfejs \"%s\""
+msgid "Remove printer"
+msgstr "Ukloni ơtampač"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Local network(s)"
-msgstr "Lokalna mreĆŸa (mreĆŸe)"
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
+msgstr ""
+"UPOZORENJE!\n"
+"\n"
+"DrakX će sada promijeniti veličinu vaĆĄe Windows particije. Budite paĆŸljivi, "
+"ova\n"
+"operacija je opasna. Ako to već niste uradili, najprije napustite "
+"instalaciju,\n"
+"pokrenite scandisk pod Windowsom (opcionalno pokrenite defrag), zatim\n"
+"ponovo pokrenite instalaciju. Također biste trebali spasiti sve podatke.\n"
+"Kada ste sigurni, kliknite na Ok."
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Raw printer (No driver)"
-msgstr "Sirovo ĆĄtampanje (Bez drajvera)"
+msgid "Which services would you like to allow the Internet to connect to?"
+msgstr "Kojim servisima ĆŸelite dozvoliti pristup sa Interneta?"
-#: ../../printer/main.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ", using command %s"
-msgstr ", koristeći komandu %s"
+msgid ""
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
+msgstr ""
+"Dobro doĆĄli u aplikaciju za podeĆĄavanje maila.\n"
+"\n"
+"Ovdje moĆŸete podesiti sistem obavjeĆĄtavanja.\n"
-#: ../../printer/main.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr "na Novell serveru \"%s\", ơtampač \"%s\""
+msgid "Other"
+msgstr "Ostalo"
-#: ../../printer/main.pm:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr "na SMB/Windows serveru \"%s\", share \"%s\""
+msgid "Default"
+msgstr "Default"
-#: ../../printer/main.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP host \"%s\", port %s"
+msgid "Button 2 Emulation"
+msgstr "Emulacija 2 dugmeta"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr "na LPD serveru \"%s\", ơtampač \"%s\""
+msgid "type1inst building"
+msgstr "type1inst kreiranje"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ", printing to %s"
-msgstr ", ĆĄtampa u %s"
+msgid "Abiword"
+msgstr "Abiword"
-#: ../../printer/main.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ", multi-function device"
-msgstr ", viơenamjenski uređaj"
+msgid "choose image file"
+msgstr "izaberite image datoteku"
-#: ../../printer/main.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", viơenamjenski uređaj na HP JetDirect"
+msgid "X server"
+msgstr "X server"
-#: ../../printer/main.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ", multi-function device on USB"
-msgstr ", viơenamjenski uređaj na USBu"
+msgid "Domain Admin User Name"
+msgstr "Korisničko ime domenskog administratora"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ", multi-function device on parallel port \\#%s"
-msgstr ", viơenamjenski uređaj na paralelnom portu \\#%s"
+msgid "There was an error while scanning for TV channels"
+msgstr "DoĆĄlo je do greĆĄke kod pretrage TV kanala"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ", USB printer"
-msgstr ", USB ơtampač"
+msgid "US keyboard (international)"
+msgstr "US tastatura (međunarodna)"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ", USB printer \\#%s"
-msgstr ", USB ơtampač \\#%s"
+msgid "Not installed"
+msgstr "Nije instaliran"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid " on parallel port \\#%s"
-msgstr " na paralelnom portu \\#%s"
+msgid "LAN connection"
+msgstr "LAN konekcija"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Local Printers"
-msgstr "Lokalni ơtampači"
+msgid "/File/-"
+msgstr "/Datoteka/-"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Pipe job into a command"
-msgstr "Spoji zadatak na komandu"
+msgid "Italian"
+msgstr "Italijanska"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
-msgid "Enter a printer device URI"
-msgstr "Unesite URI uređaja ơtampača"
+msgid "Basic"
+msgstr "Osnovno"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Printer on NetWare server"
-msgstr "Ơtampač na NetWare serveru"
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
+msgstr ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Ơtampač na SMB/Windows 95/98/NT serveru"
+msgid "Honduras"
+msgstr "Honduras"
-#: ../../printer/main.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "MreĆŸni ĆĄtampač (TCP/Socket)"
+msgid "pdq"
+msgstr ""
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Printer on remote lpd server"
-msgstr "Ơtampač na udaljenom lpd serveru"
+msgid "Card IO"
+msgstr "IO kartice"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Ơtampač na udaljenom CUPS serveru"
+msgid "when checked, owner and group won't be changed"
+msgstr "kada je uključeno, vlasnik i grupa se ne mogu promijeniti"
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Remote printer"
-msgstr "Udaljeni ơtampač"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
+msgstr ""
+"\n"
+"Ova posebna Bootstrap\n"
+"particija je za\n"
+"dvojni boot vaĆĄeg sistema.\n"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Local printer"
-msgstr "Lokalni ơtampač"
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
+msgstr ""
+"Molimo izaberite za svaki korak da li ćete ga ponoviti kao i u vaơoj "
+"instalaciji ili će se obaviti ručno"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Configuring applications..."
-msgstr "PodeĆĄavam aplikacije..."
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
+msgstr ""
+"Ovdje takođe trebate odlučiti da li ovaj računar treba koristiti skenere na "
+"udaljenim računarima."
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
+msgid "\t-Network by FTP.\n"
+msgstr "\t-MreĆŸu preko FTPa.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Uklanjam ơtampač \"%s\" ..."
+msgid "Russian (Yawerty)"
+msgstr "Ruska (Yawerty)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Da li ĆŸelite da uklonite ĆĄtampač \"%s\"?"
+msgid "You must enter a device or file name!"
+msgstr "Morate unijeti naziv uređaja ili datoteke!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Remove printer"
-msgstr "Ukloni ơtampač"
+msgid "/_Quit"
+msgstr "/_Izlaz"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Learn how to use this printer"
-msgstr "Saznaj kako koristiti ovaj ơtampač"
+msgid ""
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
+msgstr ""
+"Potreban vam je Alcatel-ov mikrokod.\n"
+"MoĆŸete ga downloadovati na\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"zatim kopirajte mgmt.o u /usr/share/speedtouch"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Print test pages"
-msgstr "Ć tampaj testnu stranicu"
+msgid "Graphics memory: %s kB\n"
+msgstr "Grafička memorija: %s kB\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
-msgstr "Nisam uspio ukloniti ơtampač \"%s\" iz Star/Open Offica."
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+msgstr ""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "access to compilation tools"
+msgstr "pristup alatima za kompajliranje"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please select data to restore..."
+msgstr "Molim izaberite podatke za vraćanje..."
+
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
-msgstr "Ơtampač \"%s\" je uspjeơno uklonjen iz Star/Open Offica."
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
+msgstr ""
+"Ako planirate koristiti aboot, budite paĆŸljivi i ostavite slobodnog prostora "
+"(2048 sektora je dovoljno)\n"
+"na početku diska"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Uklanjam ơtampač iz Star/Open Offica"
+msgid "Standard test page"
+msgstr "Standardna testna strana"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Ukloni ovaj ơtampač iz Star/Open Offica"
+msgid "Create"
+msgstr "Kreiraj"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr "Nisam uspio dodati ơtampač \"%s\" u Star Office/OpenOffice.org/GIMP."
+msgid "What"
+msgstr "Ć ta"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "There was an error ordering packages:"
+msgstr "Doơlo je do greơke pri naručivanju paketa:"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Bulgarian (BDS)"
+msgstr "Bugarska (BDS)"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Disable Server"
+msgstr "Onemogući server"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Filesystem encryption key"
+msgstr "Ključ za kodiranje datotečnog sistema"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Gujarati"
+msgstr "Gujarati"
+
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr "Ơtampač \"%s\" je uspjeơno dodan u Star Office/OpenOffice.org/GIMP."
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
+msgstr ""
+"Molimo unesite prvi broj od deset koji ĆŸelite izmjeniti,\n"
+"ili samo pritisnite Enter za nastavak.\n"
+"VaĆĄ izbor?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Dodajem ơtampač u Star Office/OpenOffice.org/GIMP"
+msgid "Save theme"
+msgstr "Snimi temu"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Dodaj ovaj ơtampač u Star Office/OpenOffice.org/GIMP"
+msgid "group"
+msgstr "grupa"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Ơtampač \"%s\" je sada podeơen kao podrazumjevani ơtampač."
+msgid "Brazil"
+msgstr "Brazil"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Default printer"
-msgstr "Podrazumjevani ơtampač"
+msgid "Auto Install"
+msgstr "Auto instalacija"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "Set this printer as the default"
-msgstr "Podesi ơtampač kao podrazumjevani"
+msgid "Network Configuration Wizard"
+msgstr "Čarobnjak za podeĆĄavanje mreĆŸe"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printer options"
-msgstr "Opcije ơtampača"
+msgid "Removable media automounting"
+msgstr "Automatsko montiranje izmjenjivog medija"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Printer manufacturer, model"
-msgstr "Proizvođač ơtampača, model"
+msgid "Printing"
+msgstr "Ć tampa"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "Proizvođač ơtampača, model, drajver"
+msgid "Unkown driver"
+msgstr "Nepoznat drajver"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Uklanjam stari ơtampač \"%s\" ..."
+msgid ""
+"There are no printers found which are directly connected to your machine"
+msgstr "Nema ơtampača koji su direktno povezani na ovaj računar"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printer name, description, location"
-msgstr "Naziv ơtampača, opis, lokacija"
+msgid "Create a new partition"
+msgstr "Napravi novu particiju"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Printer connection type"
-msgstr "Tip konekcije ơtampača"
+msgid "Driver:"
+msgstr "Drajver:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Raw printer"
-msgstr "Sirovi ơtampač"
+msgid "unknown"
+msgstr "nepoznat"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Do it!"
-msgstr "Uradi!"
+msgid "Use fdisk"
+msgstr "Koristi fdisk"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Close"
-msgstr "Zatvori"
+msgid "MOVE YOUR WHEEL!"
+msgstr "POMJERITE VAƠ TOČKIĆ!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "sent: "
+msgstr "poslano:"
+
+#: ../../network/network.pm:1
#, c-format
+msgid "Automatic IP"
+msgstr "Automatska IP"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+" Note that two different options are available after clicking the button:\n"
+"\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
msgstr ""
-"Ơtampač %s\n"
-"Ć ta ĆŸelite da izmjenite na ovom ĆĄtampaču?"
+"To je to. Instalacija je sada zavrĆĄena i vaĆĄ GNU/Linux sistem je spreman\n"
+"za upotrebu. Samo kliknite na \"Dalje ->\" da restartujete sistem. Prva "
+"stvar\n"
+"koju ćete ugledati nakon ơto računar zavrơi hardverske provjere je meni\n"
+"bootloadera, koji vam nudi izbor operativnog sistema koji ĆŸelite pokrenuti.\n"
+"\n"
+"Dugme \"Napredno\" će vam ponuditi joơ dva dugmeta za:\n"
+"\n"
+" * \"generisanje autoinstalacijske diskete\": da biste napravili "
+"instalacionu\n"
+"disketu koja će automatski izvrơiti cijelu instalaciju bez intervencije "
+"operatora,\n"
+"sličnu instalaciji koju ste upravo konfigurisali.\n"
+"\n"
+" Obratite paĆŸnju na dvije različite opcije koje su dostupne nakon "
+"klikanja\n"
+"na ovo dugme:\n"
+"\n"
+" * \"Ponovi\". Ovo je djelomično automatizirana instalacija. Korak\n"
+"particioniranja je jedini interaktivni dio.\n"
+"\n"
+" * \"Automatizirano\". Potpuno automatska instalacija: hard disk je\n"
+"potpuno prepisan, svi podaci su izgubljeni.\n"
+"\n"
+" Ova mogućnost je vrlo prikladna kada instalirate nekoliko sličnih\n"
+"računara. Pogledajte odjeljak Automatska instalacija na naơoj web stranici\n"
+"za viĆĄe informacija.\n"
+"\n"
+" * \"Snimi izbor paketa\" (*): snima listu paketa koje ste izabrali u ovoj\n"
+"instalaciji. Da biste upotrijebili ovaj izbor sa drugom instalacijom, "
+"ubacite\n"
+"disketu i započnite instalaciju. Na upitu, pritisnite tipku [F1] i ukucajte\n"
+">>linux defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) Potrebna vam je FAT-formatirana disketa (da biste je napravili pod\n"
+"GNU/Linuxom, kucajte \"mformat a:\")"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Modify printer configuration"
-msgstr "Izmjeni konfiguraciju ơtampača"
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Add a new printer"
-msgstr "Dodaj novi ơtampač"
+msgid "Configuration of a remote printer"
+msgstr "Podeơavanje udaljenog ơtampača"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+#: ../../lang.pm:1
#, c-format
-msgid "Normal Mode"
-msgstr "Normalni mod"
+msgid "Moldova"
+msgstr "Moldova"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Change the printing system"
-msgstr "Promijenite sistem ĆĄtampe"
+msgid "Please check if you want to erase your tape before the backup."
+msgstr "Molim uključite ako ĆŸelite obrisati traku prije backupa."
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "CUPS configuration"
-msgstr "PodeĆĄavanje CUPSa"
+msgid "An online platform to respond to enterprise support needs."
+msgstr "Online platforma koja odgovara potrebama vaơeg preduzeća za podrơkom."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"OsvjeĆŸi listu ĆĄtampača (kako bi bili prikazani svi dostupni CUPS ĆĄtampači)"
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "URL treba počinjati sa 'ftp:' ili 'http:'"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr "PrikaĆŸi sve dostupne CUPS ĆĄtampače"
+msgid "Add a new rule at the end"
+msgstr "Dodaj novo pravilo na kraj"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
msgstr ""
-"Sljedeli ơtampači su podeơeni. Kliknite dva puta na neki od njih za izmjenu "
-"postavki; ako ga ĆŸelite učiniti podrazumjevanim ĆĄtampačem; ili da biste "
-"vidjeli informacije o njemu."
+"Takođe moĆŸete odlučiti da li ĆĄtampači na udaljenim računarima trebaju biti "
+"automatski dostupni sa ovog računara."
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Printing system: "
-msgstr "Sistem ĆĄtampe: "
+msgid ""
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
+msgstr ""
+"Sada moĆŸete navesti opcije za modul %s. Opcije su u formatu ``ime=vrijednost "
+"ime2=vrijednost2 ...''.\n"
+"Na primjer, ``io=0x300 irq=7''"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Checking installed software..."
-msgstr "Provjeravam instalirani software..."
+msgid "Quit without writing the partition table?"
+msgstr "Izlazite bez pisanja tabele particija?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Installing Foomatic..."
-msgstr "Instaliram Foomatic..."
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "Nisam uspio podesiti ơtampač \"%s\"!"
+msgid "Installing packages..."
+msgstr "Instaliram pakete..."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Podeơavam ơtampač \"%s\"..."
+msgid "Dutch"
+msgstr "Holandska"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Reading printer data..."
-msgstr "Čitam podatke o ơtampaču..."
+msgid "The following packages need to be installed:\n"
+msgstr "Sljedeći paketi trebaju biti instalirani:\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Koji sistem ĆĄtampanja (spooler) ĆŸelite koristiti?"
+msgid "Angola"
+msgstr "Angola"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Select Printer Spooler"
-msgstr "Izaberite spooler ơtampača"
+msgid "service setting"
+msgstr "postavke servisa"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Setting Default Printer..."
-msgstr "Postavljam podrazumjevani ơtampač..."
+msgid "Custom"
+msgstr "Ručno izaberi"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Installing %s ..."
-msgstr "Instaliram %s..."
+msgid "File is already used by another loopback, choose another one"
+msgstr "Datoteku već koristi drugi loopback, izaberite neku drugu"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Removing %s ..."
-msgstr "Uklanjam %s..."
+msgid "Read-only"
+msgstr "Samo za čitanje"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Sistem za ơtampu (%s) se neće pokrenuti automatski prilikom boota računara.\n"
-"\n"
-"Moguće je da je automatsko pokretanje isključeno prilikom promjene na viơi "
-"nivo sigurnosni, poơto je sistem za ơtampu moguća tačka napada.\n"
-"\n"
-"Da li ĆŸelite da ponovo uključite automatsko pokretanje sistema za ĆĄtampu?"
+msgid "Latvia"
+msgstr "Latvija"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Pokrećem sistem za ơtampu tokom boota"
+msgid "No known driver"
+msgstr "Nema nijedan poznat drajver"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "1 MB"
+msgstr "1 MB"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
+msgstr ""
+"Ako to nije onaj koji ĆŸelite podesiti, uneiste naziv uređaja / naziv "
+"datoteke u ulaznu liniju"
+
+#: ../../standalone/draksound:1
+#, c-format
+msgid ""
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
"\n"
-"Do you really want to configure printing on this machine?"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-"Sada ćete instalirati sistem za ơtampu %s na sistemu koji je na sigurnosnom "
-"nivou % s.\n"
+"Nije pronađena nijedna zvučna kartica na vaơoj maơini. Molim provjerite da "
+"li je ispravno spojena zvučna kartica koja je podrĆŸana pod Linuxom.\n"
"\n"
-"Ovaj sistem za ơtampu pokreće demon (pozadinski proces) koji čeka zadatke "
-"ơtampe i rjeơava ih. Ovom demonu takođe mogu pristupiti drugi računari putem "
-"mreĆŸe, tako da je to moguća tačka napada. Stoga se tek rijetki od odabranih "
-"demona pokreću na ovom sigurnosnom nivou.\n"
"\n"
-"Da li zaista ĆŸelite podesiti ĆĄtampanje na ovom računaru?"
+"MoĆŸete posjetiti naĆĄu bazu hardvera na:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Instaliram sistem za ĆĄtampu na sigurnosnom nivou: %s"
+msgid "Configure Local Area Network..."
+msgstr "Podesi Lokalnu mreĆŸu..."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "paranoid"
-msgstr "paranoičan"
+msgid "Launch the sound system on your machine"
+msgstr "Pokreće zvučni sistem na vaơem računaru"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "high"
-msgstr "visok"
+msgid "Preparing printer database..."
+msgstr "Pripremam bazu podataka o ơtampačima..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Restarting printing system..."
-msgstr "Restartujem sistem za ĆĄtampu ..."
+msgid "Information"
+msgstr "Informacije"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Configuration of a remote printer"
-msgstr "Podeơavanje udaljenog ơtampača"
+msgid "No network card"
+msgstr "Nema mreĆŸne kartice"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"MreĆŸni pristup nije aktivan i nije mogao biti pokrenut. Molimo provjerite "
-"vaĆĄu konfiguraciju i vaĆĄ hardware. Onda ponovo pokuĆĄajte podesiti udaljeni "
-"ơtampač."
+msgid "Which filesystem do you want?"
+msgstr "Koji datotečni sistem ĆŸelite?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"PodeĆĄavanje mreĆŸe koje je napravljeno tokom instalacije sada ne moĆŸe biti "
-"pokrenuto. Molim provjerite da li će mreĆŸa postati dostupna nakon bootanja "
-"sistema i popravite podeơenja koristeći Mandrake Kontrolni centar, sekcija "
-"\"MreĆŸa i Internet\"/\"Konekcija\", a zatim podesite ĆĄtampač, ponovo "
-"koristeći Mandrake Kontrolni centar, sekcija \"Hardver\"/\"Ơtampač\""
+msgid "3 buttons"
+msgstr "3 dugmeta"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configure the network now"
-msgstr "Sada podesite mreĆŸu"
+msgid "Detailed information"
+msgstr "Detaljne informacije"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Go on without configuring the network"
-msgstr "Nastavi bez podeĆĄavanja mreĆŸe"
+msgid "Malta"
+msgstr "Malta"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
+"Printer default settings\n"
+"\n"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
msgstr ""
-"Sada ćete podesiti udaljeni ĆĄtampač. Ovo zahtjeva aktivan pristup mreĆŸi, ali "
-"vaĆĄa mreĆŸa joĆĄ uvijek nije podeĆĄena. Ako ĆŸelite nastaviti bez podeĆĄavanja "
-"mreĆŸe, nećete moći koristiti ĆĄtampač koji sada podeĆĄavate. Kako ĆŸelite da "
-"nastavimo?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Network functionality not configured"
-msgstr "MreĆŸna funkcionalnost nije podeĆĄena"
+"Podrazumjevane opcije ơtampača\n"
+"\n"
+"Trebate provjeriti da su veličina papira i tip tinte (ako je dostupno) "
+"ispravno podeĆĄeni. Obratite paĆŸnju da za voma veliku kvalitetu / rezoluciju "
+"ĆĄtampa moĆŸe postati znatno sporija."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Starting network..."
-msgstr "Pokrećem mreĆŸu..."
+msgid "This floppy is not FAT formatted"
+msgstr "Ova disketa nije FAT formatirana"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Refreshing printer data..."
-msgstr "OsvjeĆŸavam podatke o ĆĄtampaču..."
+msgid "Configuring network"
+msgstr "PodeĆĄavam mreĆŸu"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Prebacili ste vaơ bivơi podrazumjevani ơtampač (\"%s\"),Da li će to također "
-"biti podrazumjevani ơtampač podnovim sistemom ơtampe %s?"
+msgid "Graphic Card"
+msgstr "Grafička karta"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Transfer printer configuration"
-msgstr "Premjeơtanje konfiguracije ơtamapča"
+msgid "Resizing Windows partition"
+msgstr "Smanjujem Windows particiju"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Transferring %s..."
-msgstr "Prebacujem %s ..."
+msgid "Provider dns 1 (optional)"
+msgstr "Provider dns 1 (opcionalno)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "New printer name"
-msgstr "Novo ime ơtampača"
+msgid "Cameroon"
+msgstr "Kamerun"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
msgstr ""
-"Ơtampač \"%s\" već postoji,\n"
-"da li sigurno ĆŸelite prepisati ovu konfiguraciju?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Naziv ơtampača bi se trebao sastojati od slova, brojeva i donje linije"
+"Sada moĆŸete particionirati %s.\n"
+"Kada zavrĆĄite, ne zaboravite spasiti sa `w'"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Transfer"
-msgstr "Prebaci"
+msgid "Close"
+msgstr "Zatvori"
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
msgstr ""
-"Ơtampač pod imenom \"%s\" već postoji pod %s: \n"
-"Kliknite na \"Prebaci\" da to prepiĆĄete.\n"
-"MoĆŸete također unijeti novo ime ili preskočiti ovaj ĆĄtampač."
+"\"DrĆŸava\": provjerite trenutni izbor drĆŸave. Ako se ne nalazite ovdje,\n"
+"kliknite na dugme \"Podesi\" i izaberite neku drugu drĆŸavu. Ako se vaĆĄa\n"
+"zemlja ne nalazi na listi, kliknite na dugme \"ViĆĄe\" kako biste dobili "
+"listu\n"
+"svih drĆŸava."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Do not transfer printers"
-msgstr "Nemoj prebacivati ơtampače"
+msgid "Calendar"
+msgstr "Kalendar"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
+"Restore Selected\n"
+"Catalog Entry"
msgstr ""
-"\n"
-"Označite ơtampače koje ćete prebacivati i kliknite na \n"
-"\"Prebaci\"."
+"Vrati izabrane\n"
+"stavke katologa"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
msgstr ""
-"\n"
-"Također ơtampači konfigurisani sa PPD datotekama koje su osigurali njihovi "
-"proizvođači ili sa vlastitim CUPS drajverima ne mogu biti prebačeni."
+"Da biste koristili udaljeni lpd ơtampač, morate dati ime računara za printer "
+"server i ime ơtampača na tom serveru."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Pored toga, redovi koji nisu kreirani ovim programom ili sa \"foomatic-"
-"configure\" ne mogu biti premjeĆĄteni."
+msgid "Iceland"
+msgstr "Island"
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD i LPRng ne podrĆŸavaju IPP ĆĄtampače.\n"
+msgid "consolehelper missing"
+msgstr "nedostaje consolehelper"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ podrĆŸava samo lokalne ĆĄtampače, udaljene LPD ĆĄtampačei Socket/TCP "
-"ơtampače.\n"
+msgid "stopped"
+msgstr "zaustavljen"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS ne podrĆŸava ĆĄtampače na Novell serverima ili ĆĄtampačekoji ĆĄalju podatke "
-"u komandama slobodnog oblika.\n"
+msgid "Whether the FPU has an irq vector"
+msgstr "Da li FPU ima IRQ vektor"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"MoĆŸete kopirati konfiguraciju ĆĄtampača koju ste napravili za spooler %s u % "
-"s, vaơ trenutni spooler. Svi podaci o konfiguraciji (naziv ơtampača, opis, "
-"lokacija, tip konekcije kao i podrazumjevane opcije) će biti preuzeti, ali "
-"zadaci ơtampe neće biti prebačeni.\n"
-"Svi redovi ne mogu biti prebačeni zbog sljedećih razloga:\n"
+msgid "Ext2"
+msgstr "Ext2"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-"Vaơ ơtampač je podeơen automatski kako bi vam dao pristup memoriji foto "
-"kartice sa PCa. Sada moĆŸete pristupiti vaĆĄim foto karticama koristeći "
-"grafički program \"MToolsFM\" (Meni: \"Aplikacije\" -> \"Datotečni alati\" -"
-"> \"MTools File Manager\") ili alat komandne linije \"mtools\" (kucajte "
-"\"man mtools\" na komandnoj liniji za viơe informacija). Datotečni sistem "
-"vaơe kartice ćete naći pod slovom \"p:\", ili pod narednim slovima ako imate "
-"viơe od jednog HP ơtampača sa jedinicom za foto kartice. U \"MToolsFM\" "
-"promijeniti slovo drajva koristeći polje u gornjem desnom uglu liste "
-"datoteka."
+msgid "Expand Tree"
+msgstr "ProĆĄiri stablo"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
+"The old \"%s\" driver is blacklisted.\n"
"\n"
-"Do not use \"scannerdrake\" for this device!"
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-"Vaơ viơenamjenski uređaj je automatski konfigurisan kako bi mogao skenirati. "
-"Sada moĆŸete skenirati sa komandne linije pomoću komande \"scanimage"
-"\" (\"scanimage -d hp:%s\" kako biste naveli scanner ako imate viĆĄe od "
-"jednog) ili koristeći grafičke okoline \"xscanimage\" ili \"xsane\". Ako "
-"koristite GIMP, moĆŸete također skenirati koristeći odgovarajuću stavku u "
-"meniju \"File\"/\"Acquire\". Za viĆĄe informacija, pogledajte joĆĄ i \"man "
-"scanimage\" na komandnoj liniji (\"#scanimage\" u Konqueroru).\n"
+"Stari \"%s\" drajver je na crnoj listi.\n"
"\n"
-"Nemojte koristiti \"scannerdrake\" za ovaj uređaj!"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printing test page(s)..."
-msgstr "Ć tampam testnu stranicu..."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Print option list"
-msgstr "Lista opcija za ĆĄtampu"
+"Prijavljeno je da ovaj drajver prilikom deinstalacije izaziva oops kernela.\n"
+"\n"
+"Stoga će novi drajver \"%s\" biti koriơten tek nakon idućeg pokretanja "
+"sistema."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Ơtampam na ơtampač \"%s\""
+msgid "Expert Mode"
+msgstr "Ekspertni mod"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Ć tampam/pristupam foto kartici na \"%s\""
+msgid "Printer options"
+msgstr "Opcije ơtampača"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Ć tampam/skeniram na \"%s\""
+msgid "Local Network adress"
+msgstr "Lokalna mreĆŸna adresa"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Ć tampam/skeniram/foto kartica na \"%s\""
+msgid "Backup your System files. (/etc directory)"
+msgstr "Backup sistemskih datoteka. (/etc direktorij)"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
"\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
+"\n"
+"Do you want to install the updates ?"
msgstr ""
-"Za listu opcija koje su dostupne za trenutni ơtampač ili pročitajte listu "
-"koja je data ispod ili kliknite na dugme \"Lista opcija za ĆĄtampu\".%s%s%s\n"
+"Sada imate mogućnost da dobavite sa Interneta nove verzije paketa koji\n"
+"su izaơli nakon ơto je distribucija objavljena. Među njima su sigurnosne "
+"zakrpe\n"
+"i ispravke bugova.\n"
+"\n"
+"Da biste izvrĆĄili download, potrebno je da podesite Internet konekciju.\n"
"\n"
+"Da li ĆŸelite instalirati update-ovane pakete ?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Samba Server"
+msgstr "Samba server"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg, alert=1)\n"
"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
+"Enable/Disable IP spoofing protection."
msgstr ""
+"Arguments: (arg, alert=1)\n"
"\n"
-"Komande \"%s\" i \"%s\" također omogućavaju izmjenu opcija za pojedinačni "
-"zadatak ĆĄtampe. Jednostavno dodajte ĆŸeljena podeĆĄenja na komandnu liniju, "
-"npr. \"%s <datoteka>\".\n"
+"Enable/Disable IP spoofing protection."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"MoĆŸete također koristiti grafički interfejs \"xpdq\" za podeĆĄavanje opcija i "
-"upravljanje zadacima ĆĄtampe.\n"
-"Ako koristite KDE okruĆŸenje radne povrĆĄine imate \"dugme za paniku\". To je "
-"ikona na radnoj povrơini čiji je naziv \"ZAUSTAVI ơtampač!\", koja "
-"zaustavlja sve zadatke ĆĄtampe odmah kada kliknete na nju. Ovo je korisno "
-"npr. u slučaju zaglavljivanja papira.\n"
+msgid "Australian Optus cable TV"
+msgstr "Australijska Optus kablovska TV"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
msgstr ""
-"Ovu komandu također moĆŸete koristiti u polju \"Komanda za ĆĄtampu\" u "
-"dijalozima za ĆĄtampu mnogih aplikacija. Ovdje nije potrebno navesti naziv "
-"datoteke jer tudatoteku obezbjeđuje sama aplikacija.\n"
+" <Tab>/<Alt-Tab> između elemenata | <Space> vrơi izbor | <F12> idući ekran "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Za ĆĄtampanje datoteke sa komandne linije (terminalski prozor) koristite "
-"komandu \"%s <datoteka>\" ili \"%s <datoteka>\".\n"
+msgid "Subnet:"
+msgstr "Subnet:"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Za listu opcija koje su dostupne za trenutni ơtampač kliknite na dugme "
-"\"Lista opcija za ĆĄtampu\"."
+msgid "Zimbabwe"
+msgstr "Zimbabve"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Komanda \"%s\" također omogućava izmjenu opcija za pojedinačni zadatak "
-"ĆĄtampe. Jednostavno dodajte ĆŸeljena podeĆĄenja na komandnu liniju, npr. \"%s "
-"<datoteka>\". "
+msgid "Please enter the host name or IP."
+msgstr "Molimo unesite ime računara ili IP."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Za ĆĄtampanje datoteke sa komandne linije (terminalski prozor) koristite "
-"komandu \"%s <datoteka>\".\n"
+msgid "When"
+msgstr "Kada"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Second DNS Server (optional)"
+msgstr "Drugi DNS server (opcionalno)"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Finland"
+msgstr "Finska"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Here is a list of the available printing options for the current printer:\n"
+"Arguments: (arg)\n"
"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
msgstr ""
-"Ovo je lista mogućih opcija za ơtampu za trenutni ơtampač:\n"
+"Arguments: (arg)\n"
"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Ove komande moĆŸete također koristiti u polju \"Komanda za ĆĄtampu\" u "
-"dijalozima za ĆĄtampu mnogih aplikacija, ali ovdje ne morate navesti ime "
-"datoteke jer tu datoteku obezbjeđuje sama aplikacija.\n"
+msgid "Color depth: %s\n"
+msgstr "Broj boja: %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Za ĆĄtampanje datoteke sa komandne linije (terminalski prozor) moĆŸete "
-"koristiti ili komandu \"%s <datoteka>\" ili grafički alat za ơtampu: \"xpp "
-"<datoteka>\" ili \"kprinter <datoteka>\". Grafički alati vam omogućuju da "
-"jednostavno odaberete ơtampač i izmjenite podeơenja opcija.\n"
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "Ne moĆŸete isključiti ovaj paket. On mora biti unaprijeđen"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Did it work properly?"
-msgstr "Da li je radilo ispravno?"
+msgid "Loading from floppy"
+msgstr "Učitavam sa diskete"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
-"Testna stranica je poslana ơtampaču.\n"
-"MoĆŸe potrajati određeno vrijeme dok ĆĄtampač krene.\n"
+"Drakperm se koristi da pregledate datoteke koje ĆŸelite koristiti za primjenu "
+"privilegija, vlasnika i grupa putem msec-a.\n"
+"MoĆŸete također izmijeniti vaĆĄa vlastita pravila koja će prepisati "
+"podrazumijevana pravila."
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testna stranica je poslana ơtampaču.\n"
-"MoĆŸe potrajati određeno vrijeme dok ĆĄtampač krene.\n"
-"Status ĆĄtampanja:\n"
-"%s\n"
-"\n"
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-2,*-r-*"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do not print any test page"
-msgstr "Nemoj ĆĄtampati testnu stranicu"
+msgid "Slovenia"
+msgstr "Slovenija"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Photo test page"
-msgstr "Foto testna strana"
+msgid ""
+"Enter a user\n"
+"%s"
+msgstr ""
+"Unesite korisnika\n"
+"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Alternative test page (A4)"
-msgstr "Alternativna testna strana (A4)"
+msgid ""
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
+msgstr ""
+"- PCI i USB uređaji: ovo će izlistati PCI/USB id-ove za; vendor, device, "
+"subvendor i subdevice"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "Alternativna testna strana (Letter)"
+msgid "ProgressBar color selection"
+msgstr "Izbor boje trake napretka"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Standard test page"
-msgstr "Standardna testna strana"
+msgid ""
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
+msgstr ""
+"Ovo su trenutne opcije u vaĆĄem boot meniju.\n"
+"MoĆŸete dodati nove ili promijeniti postojeće."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Print"
-msgstr "Ć tampaj"
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "No test pages"
-msgstr "Nijedna testna strana"
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
msgstr ""
-"Molimo izaberite testne stranice koje ćete ơtampati.\n"
-"PaĆŸnja: foto testna stranica moĆŸe traĆŸiti dosta vremena za ĆĄtampu a na "
-"laserskim ĆĄtampačima sa malo memorije moĆŸda neće nikad ni izaći. U većini "
-"slučajeva dovoljno je odơtampati standardnu testnu stranicu."
+"IzvrĆĄava naredbe zakazane putem at komande u zadato vrijeme,\n"
+"te pokreće programe u pozadini kada je računar neopterećen."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Test pages"
-msgstr "Testna stranica"
+msgid "Radio support:"
+msgstr "PodrĆĄka za radio:"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Da li ĆŸelite da podesite ovaj ĆĄtampač (\"%s\")\n"
-"kao podrazumjevani ơtampač?"
+msgid "Installing SANE packages..."
+msgstr "Instaliram SANE pakete..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Option %s out of range!"
-msgstr "Opcija %s izvan raspona!"
+msgid "boot disk creation"
+msgstr "Kreiranje boot diskete"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Option %s must be a number!"
-msgstr "Opcija %s mora biti broj!"
+msgid "LDAP"
+msgstr "LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Opcija %s mora biti cijeli broj!"
+msgid "SILO"
+msgstr "SILO"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
#, c-format
-msgid "Printer default settings"
-msgstr "Podrazumjevane postavke ơtampača"
+msgid "Change type"
+msgstr "Promijeni tip"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "SILO Installation"
+msgstr "SILO instalacija"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use CD/DVDROM to backup"
+msgstr "Koristi CD/DVDROM za backup"
+
+#: ../../install_messages.pm:1
#, c-format
msgid ""
-"Printer default settings\n"
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
-"Podrazumjevane opcije ơtampača\n"
+"Čestitamo, instalacija je zavrơena.\n"
+"Uklonite boot medij i pritisnite return za reboot.\n"
"\n"
-"Trebate provjeriti da su veličina papira i tip tinte (ako je dostupno) "
-"ispravno podeĆĄeni. Obratite paĆŸnju da za voma veliku kvalitetu / rezoluciju "
-"ĆĄtampa moĆŸe postati znatno sporija."
+"\n"
+"Za informacije o ispravkama koje su dostupne za ovu verziju Mandrake "
+"Linuxa,\n"
+"pogledajte Errata koja je dostupna na:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Informacije o podeĆĄavanju vaĆĄeg sistema su dostupne u poglavlju\n"
+"\"nakon instalacije\" vaơeg Zvaničnog Mandrake Linux priručnika za upotrebu."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr "Upload firmware-a za HP LaserJet 1000"
+msgid "paranoid"
+msgstr "paranoičan"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Send mail report after each backup to:"
+msgstr "PoĆĄalji mail izvjeĆĄtaj nakon svakog backupa na :"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+"This command you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications. But here do not supply the file name "
+"because the file to print is provided by the application.\n"
msgstr ""
-"Da biste mogli ĆĄtampati sa vaĆĄim Lexmark inkjetom na ovoj konfiguraciji, "
-"potrebni su vam inkjet drajveri za ơtampu koje obezbjeđuje Lexmark (http://"
-"www.lexmark.com/). Kliknite na link \"Drivers\". Zatim izaberite vaĆĄ model a "
-"zatim \"Linux\" kao operativni sistem. Drajveri dolaze u vidu RPM paketa ili "
-"shell skripte sa interaktivnom grafičkom instalacijom. Ne morate obaviti ovu "
-"konfiguraciju na grafičkom interfejsu. Odustanite odmah nakon licencnog "
-"ugovora. Zatim odĆĄtampajte stranice za poravnavanje glava sa "
-"\"lexmarkmaintain\" i podesite opcije poravnanja glave pomoću ovog programa."
+"Ovu komandu također moĆŸete koristiti u polju \"Komanda za ĆĄtampu\" u "
+"dijalozima za ĆĄtampu mnogih aplikacija. Ovdje nije potrebno navesti naziv "
+"datoteke jer tudatoteku obezbjeđuje sama aplikacija.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "PodeĆĄavanje Lexmark inkjet-a"
+msgid "Resolution"
+msgstr "Rezolucija"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
msgstr ""
-"Inkjet drajveri za ĆĄtampu koje obezbjeđuje Lexmark podrĆŸavaju samo lokalne "
-"ơtampače, a ne i ơtampače na udaljenim računarima ili print serverima. "
-"Molimo spojite vaơ ơtampač na lokalni port ili ga podesite na računaru na "
-"koji je spojen."
+"Da biste ĆĄtampali na SMB ĆĄtampač, morate dati ime SMB računara (PaĆŸnja! Ono "
+"moĆŸe biti različito od TCP/IP imena!) i eventualno IP adresu print servera, "
+"kao i share naziv ĆĄtampača kojem ĆŸelite pristupiti i korisničko ime, ĆĄifru i "
+"informacije o radnoj grupi."
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse icmp echo."
msgstr ""
-"Sada podeơavate OK laserski winprinter. Ovi ơtampači\n"
-"koriste jedan poseban komunikacijski protokol i stoga rade samo kada su "
-"spojeni na prvom paralelnom portu. Ako je vaơ ơtampač spojen na neki drugi "
-"port ili na print server molimo spojite ơtampač na prvi paralelni port prije "
-"nego ơto odơtampate testnu stranicu. Inače ơtampač neće raditi. Drajver će "
-"ignorisati vaĆĄe podeĆĄenje tipa konekcije."
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse icmp echo."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "OKI winprinter configuration"
-msgstr "PodeĆĄavanje OKI winprinter-a"
+msgid "reconfigure"
+msgstr "rekonfiguriĆĄi"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
-"Ako ơtampač nije naveden, izaberite kompatibilan (pogledajte uputstva za "
-"ơtampač) ili sličan."
+"VaĆĄa kartica moĆŸe imati podrĆĄku za 3D hardversko ubrzanje sa XFree %s,\n"
+"PAĆœNJA OVO JE EKSPERIMENTALNA PODRĆ KA I MOĆœE ZALEDITI VAĆ  RAČUNAR."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
-"\n"
-"\n"
-"Molim provjerite da li je Printerdrake izvrĆĄio ispravno automatsko "
-"prepoznavanje modela vaĆĄeg ĆĄtampača. PotraĆŸite ispravan model na listi ako "
-"kursor stoji na pogreơnom modelu ili na \"Raw ơtampač\"."
+msgid "Xinetd Service"
+msgstr "Xinetd servis"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which printer model do you have?"
-msgstr "Koji model ơtampača imate?"
+msgid "access to network tools"
+msgstr "pristup mreĆŸnim alatima"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer model selection"
-msgstr "Izbor modela ơtampača"
+msgid "Firmware-Upload for HP LaserJet 1000"
+msgstr "Upload firmware-a za HP LaserJet 1000"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Reading printer database..."
-msgstr "Čitam bazu podataka o ơtampačima ..."
+msgid ""
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
+msgstr ""
+"Mandrake Linux 9.1 vam omogućuje da potjerate vaơ multimedijalni računar do "
+"krajnjih granica! Koristite najnoviji softver za sluĆĄanje muzike i audio "
+"datoteka, mijenjajte i organizujte vaĆĄe slike i fotografije, gledajte TV i "
+"video-snimke i mnogo drugog"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select model manually"
-msgstr "Izaberite model ručno"
+msgid "Here is a list of all auto-detected printers. "
+msgstr "Ovdje je lista svih automatski prepoznatih ơtampača."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The model is correct"
-msgstr "Model je ispravan"
+msgid ""
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
+msgstr ""
+"GreĆĄka u instaliranju aboota, \n"
+"da li da pokuơam nasilnu instalaciju čak i ako to uniơti prvu particiju?"
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
+"Options Description:\n"
"\n"
-"For your printer Printerdrake has found:\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
-"%s"
msgstr ""
-"Printerdrake je uporedi ime modela koje je dobijeno od automatskog "
-"prepoznavanja ơtampača sa modelima koji su navedeni u njegovoj bazi podataka "
-"kako bi naĆĄao najbliĆŸi. Ovaj izbor moĆŸda nije tačan, pogotovo ako vaĆĄ "
-"ơtampač uopơte nije naveden u bazi. Stoga provjerite da li je izbor ispravan "
-"i ako je tako kliknite \"Model je ispravan\", u suprotnom kliknite "
-"\"Izaberite model ručno\" kako biste ručno izabrali vaơ model ơtampača na "
-"sljedećem ekranu.\n"
+"options description:\n"
"\n"
-"Za vaơ ơtampač Printerdrake je naơao:\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time ( about 1000% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" /*> cat .backupignore*/\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
-"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Your printer model"
-msgstr "Model vaơeg ơtampača"
+msgid ""
+"Restore Selected\n"
+"Files"
+msgstr ""
+"Vrati izabrane\n"
+"datoteke"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Preparing printer database..."
-msgstr "Pripremam bazu podataka o ơtampačima..."
+msgid ""
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
+msgstr ""
+"%s već postoji, da ga obriơem?\n"
+"\n"
+"Upozorenje: Ako ste već jednom obavili ovaj proces, vjerovatno\n"
+"trebate očistiti unos iz liste autoriziranih ključeva na serveru."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Location"
-msgstr "Lokacija"
+msgid "Please fill or check the field below"
+msgstr "Molimo ispunite ili provjerite polje ispod"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Description"
-msgstr "Opis"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "Ćœelite li spasiti izmjene /etc/fstab"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Name of printer"
-msgstr "Naziv ơtampača"
+msgid "Boot Protocol"
+msgstr "Boot protokol"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Svakom ơtampaču treba dati ime (npr. \"stampac\"). Polja Opis i Lokacija "
-"nije potrebno popuniti. Oni su komentari za korisnike."
+msgid "LVM-disks %s\n"
+msgstr "LVM-diskovi %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr "Unesite ime ơtampača i komentare"
+msgid "The package %s is needed. Install it?"
+msgstr "Potreban je paket %s. Da li ga ĆŸelite instalirati?"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr "Omogućujem pristup ơtampaču putem CUPSa..."
+msgid "On boot"
+msgstr "Prilikom boota"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Checking device and configuring HPOJ..."
-msgstr "Provjeravam uređaj i podeơavam HPOJ..."
+msgid "Bus identification"
+msgstr "Identifikacija sabirnice (busa)"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr ""
-"Pristup foto memorijskoj kartici na vaơem HP multifunkcionalnom uređaju"
+msgid "Please make a backup of your data first"
+msgstr "Molim najprije napravite backup vaĆĄih podataka"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr "Skeniram pomoću HP multifunkcijskog uređaja"
+msgid "Vatican"
+msgstr "Vatikan"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Installing mtools packages..."
-msgstr "Instaliram mtools pakete..."
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr ""
+"Imate viĆĄe od jednog hard diska. Na koji od njih ĆŸelite instalirati Linux?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Installing SANE packages..."
-msgstr "Instaliram SANE pakete..."
+msgid "Boot ISO"
+msgstr "Boot ISO"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installing HPOJ package..."
-msgstr "Instaliram HPOJ pakete..."
+msgid "Eritrea"
+msgstr "Eritreja"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
-"Da li je vaơ ơtampač multifunkcijski uređaj od HPa ili Sony-ja (OfficeJet, "
-"PSC, LaserJet 1100/1200/1220/3200/3300 sa skenerom, Sony IJP-V100), ili HP "
-"PhotoSmart ili HP LaserJet 2200?"
+msgid "Remove List"
+msgstr "PobriĆĄi listu"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
-msgid "A command line must be entered!"
-msgstr "Trebate unijeti komandnu liniju!"
+msgid "A customizable environment"
+msgstr "Prilagodljiva okolina"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Command line"
-msgstr "Komandna linija"
+msgid "Inuktitut"
+msgstr "Inuktitut"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
-"Ovdje moĆŸete navesti bilo koju komandnu liniju kojoj će biti prosljeđen "
-"zadatak umjesto direktnog slanja na ơtampač."
+msgid "Morocco"
+msgstr "Maroko"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pipe into command"
-msgstr "Spoji (pipe) na komandu"
+msgid "Which printer model do you have?"
+msgstr "Koji model ơtampača imate?"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detected model: %s %s"
-msgstr "Detektovani model: %s %s"
+msgid "Add a new printer"
+msgstr "Dodaj novi ơtampač"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A valid URI must be entered!"
-msgstr "Trebate unijeti ispravan URI!"
+msgid " All of your selected data have been "
+msgstr " Svi vaĆĄi izabrani podaci su "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Printer Device URI"
-msgstr "URI uređaja ơtampača"
+msgid "<-- Delete"
+msgstr "<-- ObriĆĄi"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"MoĆŸete dati direktno URI za pristup ĆĄtampaču. URI mora zadovoljavati ili "
-"CUPS ili Foomatic specifikacije. Obratite paĆŸnju da nisu svi tipovi URIja "
-"podrĆŸani od svih spoolera."
+msgid "Nepal"
+msgstr "Nepal"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Port"
-msgstr "Port"
+msgid "cpu # "
+msgstr "cpu # "
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printer host name or IP"
-msgstr "Hostname ơtampača ili IP adresa"
+msgid "chunk size"
+msgstr "veličina chunka"
-#: ../../printer/printerdrake.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "The port number should be an integer!"
-msgstr "Broj porta treba biti cijeli broj!"
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "opcija prije bootanja, ili 'c' za komandnu liniju."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Nedostaje hostname ơtampača ili IP adresa!"
+msgid "Problems installing package %s"
+msgstr "Problemi tokom instaliranja paketa %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
+msgid "You will receive an alert if the load is higher than this value"
msgstr ""
-"Da biste ơtampali na TCP ili socket ơtampač, morate dati hostname ili IP "
-"adresu ơtampača i opcionalno broj porta (podrazumjeva se 9100). Na HP "
-"JetDirect serverima broj porta je obično 9100, na ostalim serverima on moĆŸe "
-"varirati. Pogledajte priručnik vaơeg hardware-a."
+"Primićete upozorenje ako je opterećenje (system load) veće od ove vrijednosti"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
msgstr ""
-"Izaberite jedan od automatski prepoznatih ơtampača sa liste ili unesite ime "
-"računara ili IP i opcionalno broj porta (podrazumjeva se 9100) u polja za "
-"unos."
+"\n"
+"\n"
+"Da prijavite bug, kliknite na dugme Prijavi.\n"
+"Ovo će otvoriti prozor web browsera na https://drakbug.mandrakesoft.com\n"
+" gdje ćete pronaći formular koji treba popuniti. Gore prikazane informacije "
+"će biti \n"
+"poslane na taj server\n"
+"\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/socket opcije ơtampača"
+msgid "Add a scanner manually"
+msgstr "Ručno dodaj skener"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Host \"%s\", port %s"
-msgstr "Host \"%s\", port %s"
+msgid "Reload partition table"
+msgstr "Ponovo učitaj tabelu particija"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", host \"%s\", port %s"
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr "Da, ĆŸelim da se autologiram sa ovim (korisnik, desktop)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Scanning network..."
-msgstr "PretraĆŸujem mreĆŸu..."
+msgid "Search for fonts in installed list"
+msgstr "PretraĆŸi fontove na listi instaliranih"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Printer auto-detection"
-msgstr "Auto prepoznavanje ơtampača"
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr "Lokalna mreĆŸa se ne zavrĆĄava sa `.0', izlazim."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "NCP queue name missing!"
-msgstr "NCP naziv reda nedostaje!"
+msgid "Boot"
+msgstr "Boot"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "NCP server name missing!"
-msgstr "NCP naziv servera nedostaje!"
+msgid "Tuner type:"
+msgstr "Vrsta tunera:"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Print Queue Name"
-msgstr "Naziv reda za ĆĄtampu"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
+msgstr ""
+"Sada je vrijeme da izaberete sistem ơtampe za vaơ računar. Drugi OSi\n"
+"vam moĆŸda nude jedan, ali Mandrake Linux nudi dva. Svaki od ovih sistema\n"
+"je najbolji za određenu vrstu konfiguracije.\n"
+"\n"
+"* \"pdq\" -- skraćeno za ''ơtampaj i nemoj stavljati u red'' (print, don't "
+"queue) je\n"
+"najbolji izbor ako imate direktnu vezu na ĆĄtampač, ĆŸelite izlaz za paniku u\n"
+"slučajevima zaglavljivanja papira i nemate mreĆŸne ĆĄtampače. (\"pdq\" moĆŸe\n"
+"rijeĆĄiti samo vrlo jednostavne mreĆŸne slučajeve i pomalo je spor kada se "
+"koristi\n"
+"sa mreĆŸama.) Preporučujemo da koristite \"pdq\" ako je ovo vaĆĄe prvo "
+"iskustvo\n"
+"sa GNU/Linuxom.\n"
+"\n"
+"* \"%s\" - ''Common Unix Printing System'' (uobičajeni UNIX sistem ơtampe)\n"
+"je odličan izbor za ơtampanje na ơtampač koji se nalazi lokalno ili s druge "
+"strane\n"
+"planete. Vrlo ga je jednostavno podesiti i moĆŸe sluĆŸiti kao server ili "
+"klijent za\n"
+"prastari \"lpd\" sistem ĆĄtampe, tako da je kompatibilan sa starijim "
+"operativnim\n"
+"sistemima kojima moĆŸda joĆĄ trebaju usluge ĆĄtampanja. Mada je vrlo moćan,\n"
+"osnovno podeĆĄavanje je skoro jednako lagano kao za \"pdq\". Ako ĆŸelite\n"
+"simulirati \"lpd\" server, provjerite da li ste pokrenuli \"cups-lpd\" "
+"servis.\n"
+"\"%s\" uključuje grafičke alate za ơtampanje ili izbor opcija ơtampača,\n"
+"te za upravljanje ơtampačem.\n"
+"\n"
+"Ako sada napravite izbor, pa kasnije zaključite da vam se ne sviđa izabrani\n"
+"sistem ĆĄtampe, moĆŸete ga promijeniti pokretanjem PrinterDrake iz Mandrake\n"
+"Kontrolnog centra i klikanjem na dugme Ekspert."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Printer Server"
-msgstr "Printer Server"
+msgid "\"Menu\" key"
+msgstr "\"Meni\" tipka"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
msgstr ""
-"Da biste ơtampali na NetWare ơtampač, trebate dati naziv NetWare print "
-"servera (PaĆŸnja! Ono moĆŸe biti različito od njegovog TCP/IP imena!) kao i "
-"naziv reda za ĆĄtampu na ĆĄtampaču kojem ĆŸelite pristupiti i eventualno "
-"korisničko ime i ơifru."
+"\n"
+"\n"
+"Molim provjerite da li je Printerdrake izvrĆĄio ispravno automatsko "
+"prepoznavanje modela vaĆĄeg ĆĄtampača. PotraĆŸite ispravan model na listi ako "
+"kursor stoji na pogreơnom modelu ili na \"Raw ơtampač\"."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "NetWare Printer Options"
-msgstr "Opcije NetWare ơtampača"
+msgid "Security Administrator:"
+msgstr "Sigurnosni administrator:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
+msgid "Please enter your login"
+msgstr "Molimo unesite vaĆĄ login"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check permissions of files in the users' home."
msgstr ""
-"Povezati ơtampač na Linux server i dopustiti Windows računarima da se "
-"spajaju na njega kao klijenti.\n"
-"\n"
-"Da li zaista ĆŸelite nastaviti sa podeĆĄavanjem ĆĄtampača kako ste započeli?"
+"ako je postavljeno na da, provjerava privilegije datoteka u korisničkom home-"
+"u."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
msgstr ""
-"Podesite vaơ Windows server tako da je ơtampač dostupan putem IPP protokola "
-"i podesite ơtampanje sa ove maơine koristeći \"%s\" tip konekcije u "
-"Printerdrake-u.\n"
-"\n"
+"Nemate nijednu Internet konekciju.\n"
+"Napravite jednu klikajući na 'Podesi'"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Fonts copy"
+msgstr "Kopiranje fontova"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Automated"
+msgstr "Automatizovano"
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Do you want to test the configuration?"
+msgstr "Ćœelite li testirati konfiguraciju?"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
+msgstr "Ơtampač \"%s\" je uspjeơno uklonjen iz Star/Open Offica."
+
+#: ../../standalone/draksec:1
+#, c-format
+msgid ""
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+" to the Internet as a client.\n"
"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
+"High: There are already some restrictions, and more automatic checks "
+"are run every night.\n"
"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
+"Higher: The security is now high enough to use the system as a server "
+"which can accept\n"
+" connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+" should choose a lower level.\n"
"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
+"Paranoid: This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+" features are at their maximum\n"
"\n"
+"Security Administrator:\n"
+" If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+" email)"
msgstr ""
-"Upravo ćete podesiti ơtampanje na Windows račun zaơtićen ơifrom. Zbog "
-"propusta u arhitekturi Samba klijentskog softvera, ĆĄifra je stavljena u "
-"običnom tekstu u komandnu liniju Samba klijenta prilikom slanja zadatka "
-"ơtampe Windows serveru. Stoga je moguće da drugi korisnici ovog istog "
-"računara prikaĆŸu ĆĄifru na ekranu koristeći komandu kao ĆĄto je \"ps auxwww"
-"\".\n"
+"Standardan: Ovo je standardna sigurnost koja se preporučuje za računar koji "
+"će biti koriơten za\n"
+" spajanje na Internet kao klijent.\n"
"\n"
-"Preporučujemo koriơtenje jedne od sljedećih alternativa (u svakom slučaju "
-"pobrinite se da samo računari na vaĆĄoj lokalnoj mreĆŸi imaju pristup Windows "
-"serveru, na primjer koristeći firewall):\n"
+"Visok: Postoje već neka ograničenja, a automatizovane provjere se "
+"vrơe svake noći.\n"
"\n"
-"Koristite račun bez ơifre na Windows serveru, kao ơto je \"GUEST\" račun ili "
-"poseban račun posvećen ơtampanju. Nemojte ukloniti zaơtitu ơifrom sa vaơeg "
-"ličnog računa ili administratorskog računa.\n"
+"ViĆĄi: Sigurnost je sada dovoljno visoka da bi se sistem mogao "
+"koristiti kao server koji\n"
+" prihvata konekcije od mnogih klijenata. Ako je vaĆĄ "
+"računar jedini klijent na Internetu,\n"
+" trebali biste izabrati niĆŸi nivo.\n"
"\n"
-"Podesite vaơ Windows server tako da je ơtampač dostupan pod LPD protokolom. "
-"Zatim podesite ơtampanje na ovom računaru uz konekciju tipa \"%s\" u "
-"Printerdrake-u.\n"
+"Paranoičan: Ovo je slično kao prethodni nivo, ali je sistem potpuno "
+"zatvoren i sigurnosne\n"
+" mogućnosti su na maksimumu.\n"
"\n"
+"Sigurnosni administrator:\n"
+" Ako je postavljena opcija 'Sigurnosna upozorenja', ova "
+"upozorenja će biti slana ovom\n"
+" korisniku (korisničko ime ili email)."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "SECURITY WARNING!"
-msgstr "SIGURNOSNO UPOZORENJE!"
+msgid "Save packages selection"
+msgstr "Spasi izbor paketa"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Samba share name missing!"
-msgstr "Naziv samba share-a nedostaje!"
+msgid "Remove the last item"
+msgstr "Ukloniti zadnju stavku"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Treba biti dato ili ime servera ili IP adresa servera!"
+msgid "User list to restore (only the most recent date per user is important)"
+msgstr ""
+"Lista korisnika za vraćanje (samo najsvjeĆŸiji datum po korisniku je značajan)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detected"
-msgstr "Auto prepoznat"
+msgid "No net boot images created!"
+msgstr "Nije napravljena boot image!"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Workgroup"
-msgstr "Radna grupa"
+msgid "use pptp"
+msgstr "koristi pptp"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Share name"
-msgstr "Share naziv"
+msgid "Choose which services should be automatically started at boot time"
+msgstr "Izaberite koji servisi se trebaju pokretati automatski prilikom boota"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SMB server IP"
-msgstr "SMB server IP"
+msgid "Learn how to use this printer"
+msgstr "Saznaj kako koristiti ovaj ơtampač"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SMB server host"
-msgstr "SMB server ime"
+msgid "Configure the network now"
+msgstr "Sada podesite mreĆŸu"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
-"Ako je ĆŸeljeni ĆĄtampač automatski prepoznat, jednostavno ga izaberite sa "
-"liste i dodajte korisničko ime, ơifru i/ili radnu grupu ako je to potrebno."
+msgid "Choose a mirror from which to get the packages"
+msgstr "Izaberite mirror sa kojeg će biti dobavljeni paketi"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
msgstr ""
-"Da biste ĆĄtampali na SMB ĆĄtampač, morate dati ime SMB računara (PaĆŸnja! Ono "
-"moĆŸe biti različito od TCP/IP imena!) i eventualno IP adresu print servera, "
-"kao i share naziv ĆĄtampača kojem ĆŸelite pristupiti i korisničko ime, ĆĄifru i "
-"informacije o radnoj grupi."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opcije SMB (Windows 9x/NT) ơtampača"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Ơtampač \"%s\" na serveru \"%s\""
+"FAT resizer ne moĆŸe izmijeniti vaĆĄu particiju, \n"
+"doơlo je do sljedeće greơke: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", ơtampač \"%s\" na serveru \"%s\""
+msgid "Which sector do you want to move it to?"
+msgstr "Na koji sektor je ĆŸelite premjestiti?"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Remote printer name missing!"
-msgstr "Ime udaljenog ơtampača nedostaje!"
+msgid "Do you want to click on this button?"
+msgstr "Da li ĆŸelite kliknuti na ovo dugme?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remote host name missing!"
-msgstr "Ime udaljenog računara nedostaje!"
+msgid "Bahamas"
+msgstr "Bahami"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote printer name"
-msgstr "Ime udaljenog ơtampača"
+msgid "Manual configuration"
+msgstr "Ručno podeơavanje"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Remote host name"
-msgstr "Ime udaljenog računara"
+msgid "search"
+msgstr "pretraĆŸivanje"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
msgstr ""
-"Da biste koristili udaljeni lpd ơtampač, morate dati ime računara za printer "
-"server i ime ơtampača na tom serveru."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Opcije udaljenog lpd ơtampača"
+"Ovaj paket učitava izabranu mapu tastature kao ơto je podeơeno u\n"
+"/etc/sysconfig/keyboard, ĆĄto se moĆŸe podesiti koriĆĄtenjem kbdconfig\n"
+"programa. Ovaj servis biste trebali ostaviti uključenim na većini računara."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Manual configuration"
-msgstr "Ručno podeơavanje"
+msgid "Xpmac (installation display driver)"
+msgstr "Xpmac (installation display driver)"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Morate izabrati ili unijeti ơtampač / uređaj!"
+msgid "Zeroconf host name must not contain a ."
+msgstr "Zeroconf ime računara ne smije sadrĆŸavati ."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
msgstr ""
-" (Paralelni portovi: /dev/lp0, /dev/lp1, ..., ekvivalentno sa LPT1:, "
-"LPT2:, ..., prvi USB ơtampač: /dev/usb/lp0, drugi USB ơtampač: /dev/usb/"
-"lp1, ...)."
+"Syslog je sistem pomoću kojeg mnogi servisi zapisuju poruke\n"
+"u razne sistemske dnevnike (logove). Pametno je uvijek imati pokrenuti "
+"syslog."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Molimo izaberite na koji port je priključen vaơ ơtampač."
+msgid "Unknown/Others"
+msgstr "Nepoznat/Ostali"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Molimo izaberite port na koji je vaơ ơtampač povezan ili unesite naziv "
-"uređaja / naziv datoteke na ulaznoj liniji"
+msgid "No TV Card detected!"
+msgstr "Nije detektovana TV kartica!"
+
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Options"
+msgstr "Opcije"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Molim izaberite ĆĄtampač kojem ĆŸelite slati zadatke ĆĄtampe."
+msgid "The printer \"%s\" is set as the default printer now."
+msgstr "Ơtampač \"%s\" je sada podeơen kao podrazumjevani ơtampač."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
msgstr ""
-"Molim odaberite ĆĄtampač koji ĆŸelite podesiti. PodeĆĄavanje ĆĄtampača će raditi "
-"potpuno automatski. Ako vaĆĄ ĆĄtampač nije ispravno prepoznat ili ako ĆŸelite "
-"sami podesiti ơtampač, uključite \"Ručno podeơavanje\"."
+"Sada podeơavate OK laserski winprinter. Ovi ơtampači\n"
+"koriste jedan poseban komunikacijski protokol i stoga rade samo kada su "
+"spojeni na prvom paralelnom portu. Ako je vaơ ơtampač spojen na neki drugi "
+"port ili na print server molimo spojite ơtampač na prvi paralelni port prije "
+"nego ơto odơtampate testnu stranicu. Inače ơtampač neće raditi. Drajver će "
+"ignorisati vaĆĄe podeĆĄenje tipa konekcije."
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr "Ovdje je lista svih automatski prepoznatih ơtampača."
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgstr "Generacija procesora (npr: 8 za PentiumIII, ...)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr "Trenutno nije dostupna nijedna alternativa"
+msgid "Auto-detected"
+msgstr "Auto prepoznat"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-"Podeơavanje ơtampača će raditi potpuno automatski. Ako vaơ ơtampač nije "
-"ispravno prepoznat ili ako ĆŸelite sami podesiti ĆĄtampač, uključite \"Ručno "
-"podeĆĄavanje\"."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "The following printer was auto-detected. "
-msgstr "Sljedeći ơtampač je prepoznat automatski."
+"Sada ćete podesiti instalacioni server, koji se sastoji od PXE servera (DHCP "
+"servera) i TFTP servera.\n"
+"Sa ovom opcijom, moći ćete instalirati Mandrake Linux na druge računare na "
+"vaĆĄoj lokalnoj mreĆŸi koristećiovaj računar kao izvor.\n"
+"\n"
+"Prije nego ĆĄto nastavite, provjerite da li ste podesili mreĆŸni/internet "
+"pristup koristeći drakconnect.\n"
+"\n"
+"Napomena: potreban vam je poseban MreĆŸni adapter da biste podesili Lokalnu "
+"mreĆŸu (LAN)."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
-"Molimo izaberite ĆĄtampač kojem ĆŸelite slati zadatke ĆĄtampe ili unesite naziv "
-"uređaja / naziv datoteke na ulaznoj liniji"
+"Nema dovoljno slobodnog prostora za 1 MB bootstrap! Instalacija će "
+"nastaviti, ali da biste bootali vaĆĄ sistem, morate kreirati bootstrap "
+"particiju u DiskDrake-u"
#: ../../printer/printerdrake.pm:1
#, c-format
@@ -12296,1091 +12127,781 @@ msgstr ""
"Molimo izaberite ĆĄtampač koji ĆŸelite podesiti ili unesite naziv uređaja / "
"naziv datoteke na ulaznoj liniji"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr ""
-"Alternativno, moĆŸete nasvesti naziv uređaja / naziv datoteke na ulaznoj "
-"liniji"
+msgid "Refuse"
+msgstr "Odbij"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "HFS"
+msgstr "HFS"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
msgstr ""
-"Ako to nije onaj koji ĆŸelite podesiti, uneiste naziv uređaja / naziv "
-"datoteke u ulaznu liniju"
+"HardDrake ispituje hardware i eventualno podeĆĄava novi ili\n"
+"izmjenjeni hardware."
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, c-format
-msgid "Available printers"
-msgstr "Dostupni ơtampači"
+msgid "Remote Printers"
+msgstr "Udaljeni ơtampači"
-#: ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "No printer found!"
-msgstr "Nije pronađen nijedan ơtampač!"
+msgid "Creating and formatting file %s"
+msgstr "Kreiram i formatiram datoteku %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "You must enter a device or file name!"
-msgstr "Morate unijeti naziv uređaja ili datoteke!"
+msgid "if set to yes, check additions/removals of sgid files."
+msgstr "ako je postavljeno na da, provjerava dodavanje/brisanje sgid datoteka."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
-"Nije pronađen nijedan lokalni ĆĄtampač! Ako ĆŸelite ručno instalirati ĆĄtampač, "
-"unesite ime uređaja / ime datoteke na ulaznu liniju (Paralelni portovi: /dev/"
-"lp0, /dev/lp1, ..., ekvivalentno LPT1:, LPT2:, ..., prvi USB ơtampač: /dev/"
-"usb/lp0, drugi USB ơtampač: /dev/usb/lp1, ...)."
+"Za ơtampač HP LaserJet 1000 potrebno je da uploadujete firmwer prilikom "
+"paljenja. Potrebno je da skinete Windows drajvere sa HPove web stranice "
+"(firmware koji se nalazi na CDu koji je doơao uz ơtampač ne radi) i izvadite "
+"firmware datoteku. Ovo ćete uraditi tako ơto ćete raspakovati "
+"samoraspakujuću '.exe' datoteku koristeći 'unzip' alat, te potraĆŸiti "
+"datoteku 'sihp1000.img'. Kopirajte ovu datoteku u direktorij '/etc/printer'. "
+"Ovdje će je automatski pronaći uploader skripta i poslati ơtampaču svaki put "
+"kada ơtampač bude spojen i upaljen.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Local Printer"
-msgstr "Lokalni ơtampač"
+msgid "Choose an existing LVM to add to"
+msgstr "Izaberite postojeći LVM na koji ćete dodati"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "USB printer \\#%s"
-msgstr "USB ơtampač \\#%s"
+msgid "xfs restart"
+msgstr "restart xfs-a"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "Ơtampač na paralelnom portu \\#%s"
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
+"Ơtampač \"%s\" već postoji,\n"
+"da li sigurno ĆŸelite prepisati ovu konfiguraciju?"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Ơtampač \"%s\" na SMB/Windows serveru \"%s\""
+msgid "No partition available"
+msgstr "Nema dostupnih particija"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "MreĆŸni ĆĄtampač \"%s\", port %s"
+msgid "Use the scanners on hosts: "
+msgstr "Koristi skenere na računaru:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Detected %s"
-msgstr "Detektovan %s"
+msgid "Unselected All"
+msgstr "NiĆĄta izabrano"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ", ơtampač \"%s\" na SMB/Windows serveru \"%s\""
+msgid "Domain Name Resolver"
+msgstr "Domain Name Resolver"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", mreĆŸni ĆĄtampač \"%s\", port %s"
+msgid "Encryption key (again)"
+msgstr "Ključ enkripcije (joơ jednom)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Čestitamo, vaơ ơtampač je sada instaliran i podeơen!\n"
-"\n"
-"MoĆŸete ĆĄtampati koristeći komandu \"Ć tampaj\" u vaĆĄoj aplikaciji (obično se "
-"nalazi u meniju \"Datoteka).\n"
-"\n"
-"Ako ĆŸelite dodati, ukloniti ili promijeniti ime ĆĄtampača, ili ako ĆŸelite "
-"promijeniti neke podrazumjevane postavke (ulazni put papira, kvaliteta "
-"ơtampe...), izaberite opciju \"Ơtampač\" u \"Hardware\" sekciji Mandrake "
-"Kontrolnog centra."
+msgid "Samba share name missing!"
+msgstr "Naziv samba share-a nedostaje!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr "Automatski prepoznaj ơtampače spojene na Microsoft Windows računare"
+msgid "True Type install done"
+msgstr "ZavrĆĄena True Type instalacija"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr "Automatski prepoznaj ĆĄtampače spojene direktno na lokalnu mreĆŸu"
+msgid "Detection in progress"
+msgstr "Detekcija u toku"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Automatski prepoznaj ơtampače spojene na ovaj računar"
+msgid "Build Whole Kernel -->"
+msgstr "Izgradi cijeli kernel -->"
+
+#: ../../install_steps.pm:1
+#, c-format
+msgid "Welcome to %s"
+msgstr "Dobro doĆĄli u %s"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "Molimo ubacite disketu Update Modula u jedinicu %s"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Bootsplash"
+msgstr "Boot ekran"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"The following printer\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"%s%s\n"
+"is directly connected to your system"
msgstr ""
+"Sljedeći ơtampač\n"
"\n"
-"Dobro doơli u Čarobnjak za podeơavanje ơtampača\n"
-"\n"
-"Ovaj čarobnjak će vam pomoći da instalirate ơtampače spojene na ovaj "
-"računar.\n"
-"\n"
-"Ako imate ơtampač spojen na ovaj računar, molim priključite ga na računar i "
-"upalite ga kako bi bio auto-prepoznat.\n"
-"\n"
-"Kliknite na \"Dalje\" kada budete spremni, ili na \"Odustani\" ako ne ĆŸelite "
-"podesiti ơtampač sada."
+"%s%s\n"
+"je direktno spojen na vaĆĄ sistem"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Dobro doơli u Čarobnjak za podeơavanje ơtampača\n"
-"\n"
-"Ovaj čarobnjak će vam pomoći da instalirate ơtampače spojene na ovaj računar "
-"ili spojene na mreĆŸu.\n"
-"\n"
-"Ako imate ơtampač spojen na ovaj računar, molim priključite ga na računar i "
-"upalite ga kako bi bio auto-prepoznat. Takođe mreĆŸni ĆĄtampači moraju biti "
-"spojeni i upaljeni.\n"
-"\n"
-"Obratite paĆŸnju da detekcija mreĆŸnih ĆĄtampača traje duĆŸe nego detekcija "
-"ĆĄtampača spojenih na ovaj računar. Stoga ugasite detekciju mreĆŸnih ĆĄtampača "
-"ako vam ona nije potrebna.\n"
-"\n"
-"Kliknite na \"Dalje\" kada budete spremni, ili na \"Odustani\" ako ne ĆŸelite "
-"podesiti ơtampač sada."
+msgid "Printer sharing on hosts/networks: "
+msgstr "Dijeljenje ĆĄtampača na računarima/mreĆŸama:"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
"\n"
-"Dobro doơli u Čarobnjak za podeơavanje ơtampača\n"
-"\n"
-"Ovaj čarobnjak će vam pomoći da instalirate ơtampače spojene na ovaj "
-"računar, na mreĆŸu ili na udaljeni Windows računar\n"
-"\n"
-"Ako imate ơtampač spojen na ovaj računar, molim priključite ga na računar i "
-"upalite ga kako bi bio auto-prepoznat. Takođe mreĆŸni ĆĄtampači i Windows "
-"računari moraju biti povezani i upaljeni.\n"
-"\n"
-"Obratite paĆŸnju da detekcija mreĆŸnih ĆĄtampača traje duĆŸe nego detekcija "
-"ĆĄtampača spojenih na ovaj računar. Stoga ugasite detekciju mreĆŸnih ĆĄtampača "
-"i/ili Windows ơtampača ako vam ona nije potrebna.\n"
-"\n"
-"Kliknite na \"Dalje\" kada budete spremni, ili na \"Odustani\" ako ne ĆŸelite "
-"podesiti ơtampač sada."
+"Komanda \"%s\" također omogućava izmjenu opcija za pojedinačni zadatak "
+"ĆĄtampe. Jednostavno dodajte ĆŸeljena podeĆĄenja na komandnu liniju, npr. \"%s "
+"<datoteka>\". "
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
-"\n"
-"Dobro doơli u Čarobnjak za podeơavanje ơtampača\n"
-"\n"
-"Ovaj čarobnjak vam omogućuje da instalirate lokalne ili udaljene ơtampače "
-"koji će biti koriơteni sa ovog računara, a također i sa drugih računara na "
-"mreĆŸi.\n"
-"\n"
-"On će od vas traĆŸiti sve potrebne informacije kako bi ĆĄtampač bio podeĆĄen, a "
-"vama omogućen pristup svim dostupnim drajverima, opcijama drajvera i vrstama "
-"konekcije ơtampača."
+"U nekim slučajevima, %s drajver treba imati dodatne informacije za\n"
+"ispravan rad, iako on obično radi dobro i bez njih. Ćœelite li navesti neke\n"
+"ekstra opcije za njega ili dozvoliti drajveru da ispita vaơ računar za sve\n"
+"informacije koje mu trebaju? Povremeno, ispitivanje moĆŸe zaglaviti računar,\n"
+"ali ne bi trebalo izazvati nikakvu ĆĄtetu."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Not the correct CD label. Disk is labelled %s."
+msgstr "Neispravna oznaka CDa. Oznaka diska je %s."
+
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
"\n"
+"%s\n"
"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
+"Click on Configure to launch the setup wizard."
msgstr ""
+"DobrodoĆĄli u alat za Dijeljenje Internet konekcije!\n"
"\n"
+"%s\n"
"\n"
-"Printerdrake nije mogao odrediti model vaơeg %s ơtampača. Molim izaberite "
-"odgovarajući model na listi."
+"Kliknite na Podesi da pokrenete čarobnjak."
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid ")"
-msgstr ")"
+msgid "Cuba"
+msgstr "Kuba"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on "
-msgstr " na "
+msgid "Searching for new printers..."
+msgstr "TraĆŸim nove ĆĄtampače..."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "("
-msgstr "("
+msgid "Belize"
+msgstr "Belize"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configuring printer ..."
-msgstr "Podeơavam ơtampač ..."
+msgid " (multi-session)"
+msgstr " (viĆĄe sesija)"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Searching for new printers..."
-msgstr "TraĆŸim nove ĆĄtampače..."
+msgid "Kernel Boot Timeout"
+msgstr "Vrijeme za boot kernela"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"NAPOMENA: Ovisno o modelu ơtampača i sistemu ơtampe, biće instalirano do %d "
-"MB dodatnog softvera."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr "Sigurno ĆŸelite podesiti ĆĄtampanje na ovom računaru?\n"
+"VaĆĄa kartica moĆŸe imati podrĆĄku za 3D hardversko ubrzanje ali samo sa\n"
+"XFree %s. VaĆĄu karticu takođe podrĆŸava XFree %s koji moĆŸe imati bolju "
+"podrĆĄku za 2D."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Da li ĆŸelite omogućiti ĆĄtampanje na gore navedenim ĆĄtampačima?\n"
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "DrakX Particioni čarobnjak je naơao sljedeća rjeơenja:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "Da li ĆŸelite da omogućite ĆĄtampanje na ĆĄtampačima u lokalnoj mreĆŸi?\n"
+msgid "Hungarian"
+msgstr "Mađarska"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
msgstr ""
-"Ćœelite li omogućiti ĆĄtampanje na ĆĄtampačima navedenim gore ili na ĆĄtampačima "
-"u lokalnoj mreĆŸi?\n"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr "(Provjerite da li su svi ơtampači spojeni i upaljeni).\n"
+"Izaberite vaĆĄeg providera.\n"
+" Ako nije na listi, izaberite Nije na listi"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr "Nema ơtampača koji su direktno povezani na ovaj računar"
+msgid "Automatic time synchronization (using NTP)"
+msgstr "Automatska sinhronizacija vremena (koristeći NTP)"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-"\n"
-"Na vaơ sistem je spojeno %d nepoznatih ơtampača"
+msgid "8 MB"
+msgstr "8 MB"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"Na vaơ sistem je direktno spojen jedan nepoznat ơtampač"
+msgid "LDAP Server"
+msgstr "LDAP Server"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
msgstr ""
-"Sljedeći ơtampač\n"
-"\n"
-"%s%s\n"
-"je direktno spojen na vaĆĄ sistem"
+"PCMCIA podrĆĄka sluĆŸi za ispravan rad uređaja kao ĆĄto su mreĆŸne\n"
+"kartice i modemi, priključenih na PCMCIA port (obično na laptopima).\n"
+"Neće se pokrenuti sve dok nije ispravno konfigurisan, tako da je\n"
+"sigurno imati ga instaliranog i na računarima kojima nije potreban."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"Sljedeći ơtampač\n"
-"\n"
-"%s%s\n"
-"su direktno spojeni na vaĆĄ sistem"
+msgid "Choose your country"
+msgstr "Izaberite vaĆĄu drĆŸavu"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The following printers\n"
"\n"
-"%s%s\n"
-"are directly connected to your system"
+"- System Files:\n"
msgstr ""
-"Sljedeći ơtampači\n"
"\n"
-"%s%s\n"
-"su direktno spojeni na vaĆĄ sistem"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "and %d unknown printers"
-msgstr "i %d nepoznatih ơtampača"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "and one unknown printer"
-msgstr "i jedan nepoznat ơtampač"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Checking your system..."
-msgstr "Proveravam vaĆĄ sistem..."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Restarting CUPS..."
-msgstr "Restartujem CUPS..."
+"- sistemske datoteke:\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr "Ovaj server je već na listi, ne moĆŸete ga ponovo dodati.\n"
+msgid "Standalone Tools"
+msgstr "Samostalni alati"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr "Primjeri ispravnih IPa:\n"
+msgid "Where"
+msgstr "Gdje"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Unesena IP adresa nije ispravna.\n"
+msgid "but not matching"
+msgstr "but not matching"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Server IP missing!"
-msgstr "Nedostaje IP adresa servera!"
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
+msgstr ""
+"Ovdje moĆŸete izabrati alternativni drajver (ili OSS ili ALSA) za vaĆĄu zvučnu "
+"karticu (%s)."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr "Ako nije naveden port, podrazumijevaće se 631."
+msgid "Configuring PCMCIA cards..."
+msgstr "PodeĆĄavam PCMCIA kartice..."
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr "Unesite IP adresu i port računara čije ĆĄtampače ĆŸelite koristiti."
+msgid "kdesu missing"
+msgstr "nedostaje kdesu"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Pristupam ơtampačima na udaljenim CUPS serverima"
+msgid "Encryption key"
+msgstr "Ključ enkripcije"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Remove selected server"
-msgstr "Ukloni izabrani server"
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Edit selected server"
-msgstr "Izmijeni izabrani server"
+msgid "Christmas Island"
+msgstr "UskrĆĄnje ostrvo"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add server"
-msgstr "Dodaj server"
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr "Instalacija bootloadera nije uspjela. Doơlo je do sljedeće greơke:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
-"Ovdje dodajte CUPS servere čije ĆĄtampače ĆŸelite koristiti. Ovo trebate "
-"raditi samo ako serveri ne broadcast-uju informacije o njihovim ơtampačima "
-"cijeloj lokalnoj mreĆŸi."
+msgid "EIDE/SCSI channel"
+msgstr "EIDE/SCSI channel"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "IP address of host/network:"
-msgstr "IP adresa računara/mreĆŸe:"
+msgid "Set this printer as the default"
+msgstr "Podesi ơtampač kao podrazumjevani"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr "Ovaj računar/mreĆŸa je već na listi, ne moĆŸete ga ponovo dodati.\n"
+msgid "partition %s"
+msgstr "particiji %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr "Unesena IP adresa računara/mreĆŸe nije ispravna.\n"
+msgid "Paranoid"
+msgstr "Paranoičan"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Host/network IP address missing."
-msgstr "Nedostaje IP adresa računara/mreĆŸe."
+msgid "NIS"
+msgstr "NIS"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr "Izaberite mreĆŸu ili računar čijim ĆĄtampačima treba omogućiti pristup."
+msgid "<-- Del User"
+msgstr "<-- ObriĆĄi korisnika"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Sharing of local printers"
-msgstr "Dijeljenje lokalnih ơtampača"
+msgid "Location on the bus"
+msgstr "Lokacija na sabirnici"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove selected host/network"
-msgstr "Ukloni izabrani računar/mreĆŸu"
+msgid "No printer found!"
+msgstr "Nije pronađen nijedan ơtampač!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Edit selected host/network"
-msgstr "Izmijeni izabrani računar/mreĆŸu"
+msgid "the vendor name of the device"
+msgstr "naziv proizvođača uređaja"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Add host/network"
-msgstr "Dodaj računar/mreĆŸu"
+msgid "Erase entire disk"
+msgstr "Pobriơi čitav disk"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr "Ovo su računari i mreĆŸe čiji lokalni ĆĄtampači trebaju biti dostupni:"
+msgid " (Default)"
+msgstr " (Default)"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
msgstr ""
-"Kada je upaljena ova opcija, prilikom svakog pokretanja CUPSa biće "
-"provjereno da\n"
-"\n"
-"- je instaliran LPD/LPRng, CUPS neće prepisati /etc/printcap\n"
-"\n"
-"- postoji /etc/cups/cupsd.conf, ako ne onda će biti napravljen\n"
-"\n"
-"- informacije o ĆĄtampaču ne sadrĆŸe \"localhost\" kao ime servera prilikom "
-"broadcasta.\n"
+"Arguments: ()\n"
"\n"
-"Ako vam neke od ovih mjera stvaraju probleme, moĆŸete isključiti ovu opciju, "
-"ali onda se morate sami brinuti da su navedeni uslovi ispunjeni."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "Automatska ispravka konfiguracije CUPSa"
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-"Ako ovo uključite, moći ćete ơtampati obične tekstualne datoteke na "
-"japanskom jeziku. Koristite ovu funkciju samo ako zaista ĆŸelite ĆĄtampati "
-"japanski tekst, jer kada je aktivirana, viĆĄe ne moĆŸete ĆĄtampati znakove sa "
-"akcentima u latiničnim fontovima (npr. naơa slova). Takođe nećete moći "
-"prilagoditi margine, veličine znakova, itd. Ova postavka će utjecati samo na "
-"ĆĄtampače koji su definisani na ovom računaru. Ako ĆŸelite ĆĄtampati japanski "
-"tekst na udaljenom računaru, trebate aktivirati ovu funkciju na tom računaru."
+msgid "Automatic reconfiguration"
+msgstr "Automatsko ponovno podeĆĄavanje"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Japanese text printing mode"
-msgstr "Japanski reĆŸim ĆĄtampanja"
+msgid "Receiving Speed:"
+msgstr "Brzina prijema:"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
-"Da biste pristupili ơtampačima na udaljenim CUPS serverima u vaơoj lokalnoj "
-"mreĆŸi, sve ĆĄto treba je da uključite opciju \"Automatski pronađi dostupne "
-"ơtampače na udaljenim računarima\"; CUPS serveri će automatski informisati "
-"vaơ računar o svojim ơtampačima. Svi ơtampači koji su poznati vaơem računaru "
-"su navedeni u sekciji \"Udaljeni ơtampači\" glavnog Printerdrake prozora. "
-"Ako vaĆĄ CUPS server nije u lokalnoj mreĆŸi, morate ovdje unijeti njegovu IP "
-"adresu i eventualno broj porta kako biste dobili informacije od servera."
+msgid "Turks and Caicos Islands"
+msgstr "Turks i Caicos ostrva"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "None"
-msgstr "NiĆĄta"
+msgid "permissions"
+msgstr "privilegije"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Additional CUPS servers: "
-msgstr "Dodatni CUP serveri:"
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
-#, c-format
-msgid "No remote machines"
-msgstr "Nema udaljenih računara"
+msgid "<- Previous"
+msgstr "<- Nazad"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Custom configuration"
-msgstr "Vlastita konfiguracija"
+msgid "Internet Connection Sharing configuration"
+msgstr "PodeĆĄavanje dijeljenja Internet konekcije"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Dijeljenje ĆĄtampača na računarima/mreĆŸama:"
+msgid "Toggle between flat and group sorted"
+msgstr "Prekidač između ravnog i grupnog sortiranja"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr "Automatski pronađi dostupne ơtampače na udaljenim računarima"
+msgid "Themes"
+msgstr "Teme"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr "Ơtampači na ovom računaru su dostupni drugim računarima"
+msgid "Options: %s"
+msgstr "Opcije: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
-"Takođe moĆŸete odlučiti da li ĆĄtampači na udaljenim računarima trebaju biti "
-"automatski dostupni sa ovog računara."
+"Trenutno koristite %s kao boot manager.\n"
+"Kliknite na Konfiguriơi kako bi se pokrenuo čarobnjak za podeơavanje."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
-msgstr ""
-"Ovdje moĆŸete izabrati da li ĆĄtampači spojeni na ovaj računar trebaju biti "
-"dostupni drugim računarima i kojim drugim računarima."
+msgid "OKI winprinter configuration"
+msgstr "PodeĆĄavanje OKI winprinter-a"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "CUPS printer configuration"
-msgstr "Podeơavanje CUPS ơtampača"
+msgid "Saint Helena"
+msgstr "Saint Helena"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
-msgstr "Automatsko prepoznavanje ơtampača (lokalni, TCP/Socket i SMB ơtampači)"
+msgid "Security Level"
+msgstr "Sigurnosni nivo"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
+"Some steps are not completed.\n"
"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
msgstr ""
+"Neki koraci nisu dovrĆĄeni.\n"
"\n"
-"Ovdje ne morate podeơavati ơtampače na udaljenim CUPS serverima; ovi "
-"ơtampači će biti automatski prepoznati."
+"Da li zaista ĆŸelite izaći sada?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "How is the printer connected?"
-msgstr "Kako je ơtampač povezan na računar?"
+msgid "Sudan"
+msgstr "Sudan"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Select Printer Connection"
-msgstr "Izaberi konekciju ơtampača"
+msgid "Polish (qwertz layout)"
+msgstr "Poljska (qwertz)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
-"Za ơtampač HP LaserJet 1000 potrebno je da uploadujete firmwer prilikom "
-"paljenja. Potrebno je da skinete Windows drajvere sa HPove web stranice "
-"(firmware koji se nalazi na CDu koji je doơao uz ơtampač ne radi) i izvadite "
-"firmware datoteku. Ovo ćete uraditi tako ơto ćete raspakovati "
-"samoraspakujuću '.exe' datoteku koristeći 'unzip' alat, te potraĆŸiti "
-"datoteku 'sihp1000.img'. Kopirajte ovu datoteku u direktorij '/etc/printer'. "
-"Ovdje će je automatski pronaći uploader skripta i poslati ơtampaču svaki put "
-"kada ơtampač bude spojen i upaljen.\n"
+msgid "Syria"
+msgstr "Sirija"
-#: ../../security/help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
#, c-format
msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the user umask."
-msgstr ""
-"Argumenti: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
"\n"
-"Podeơava korisnički umask."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (val)\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
"\n"
-"Set the shell timeout. A value of zero means no timeout."
msgstr ""
-"Argumenti: (val)\n"
-"\n"
-"Postavlja istek vremena shella. Vrijednost nula znači bez isteka vremena."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (size)\n"
+"Dobro doĆĄli u %s izbornik operativnog sistema!\n"
"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-"Argumenti: (size)\n"
+"Izaberite operativni sistem na listi gore ili\n"
+"sačekajte %d sekundi do pokretanja podrazumjevanog OSa.\n"
"\n"
-"Postavlja veličinu historije naredbi shella. Vrijednost -1 znači "
-"neograničeno."
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr "ako je postavljeno na da, provjerava dodavanje/brisanje sgid datoteka."
+msgid "Portuguese"
+msgstr "Portugalska"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check open ports."
-msgstr "ako je postavljeno na da, provjerava otvorene portove."
+msgid "Loopback file name: "
+msgstr "Naziv loopback datoteke: "
-#: ../../security/help.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
-"ako je uključeno, ơalje mail izvjeơtaj na ovu email adresu, inače ga ơalje "
-"root-u."
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "Adresa DNS servera treba biti u formatu 1.2.3.4"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr "ako je postavljeno na da, prijavljuje rezultate provjere mailom."
+msgid "Serbia"
+msgstr "Srbija"
-#: ../../security/help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
-"ako je postavljeno na da, provjerava datoteke/direktorije koje svako moĆŸe "
-"pisati."
+msgid "Newzealand"
+msgstr "Novi Zeland"
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr "ako je postavljeno na da, prijavljuje rezultate provjere na tty."
+msgid "This directory should remain within the root filesystem"
+msgstr "Ovaj direktorij treba ostati unutar korijenskog file sistema"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr "ako je postavljeno na da, izvrĆĄava neke provjere rpm baze podataka."
+msgid "CapsLock key"
+msgstr "CapsLock tipka"
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
-"ako je postavljeno na da, provjerava da li su mreĆŸni uređaji u "
-"promiskuitetnom modu."
+msgid "Install bootloader"
+msgstr "Instalacija bootloadera"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr "ako je postavljeno na da, izvrĆĄava chkrootkit provjere."
+msgid "Select the memory size of your graphics card"
+msgstr "Izaberite veličinu memorije vaơe grafičke karte"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
-"ako je postavljeno na da, provjerava privilegije datoteka u korisničkom home-"
-"u."
+"[OPTIONS]\n"
+"Aplikacija za povezivanje na mreĆŸu/Internet i nadzor veze\n"
+"\n"
+"--defaultintf interface : podesi podrazumijevani interfejs\n"
+"--connect : spoji se na Inernet, ako nisi već spojen\n"
+"--disconnect : prekini vezu s Internetom, ako si spojen\n"
+"--force : koristi se sa (dis)connect : prinudi operaciju.\n"
+"--status : vraća 1 ako je spojen, u suprotnom 0.\n"
+"--quiet : bez interaktivnosti. Koristi se sa (dis)connect."
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr ""
-"ako je postavljeno na da, provjerava dodavanje/brisanje suid root datoteka."
+msgid "Dynamic IP Address Pool:"
+msgstr "Raspon dinamičkih IP adresa:"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr "ako je postavljeno na da, prijavljuje rezultate provjere u syslog."
+msgid "LVM name?"
+msgstr "Naziv LVMa?"
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
-msgstr ""
-"ako je postavljeno na da, provjerava prazne ĆĄifre, nedostatak ĆĄifre u /etc/"
-"shadow i korisnike sa id-om 0 koji nisu root."
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
+msgstr "Uklonjeni su neki uređaji u \"%s\" klasi hardvera:\n"
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr "ako je postavljeno na da, izvrĆĄava dnevne sigurnosne provjere."
+msgid "Found %s %s interfaces"
+msgstr "Pronađeno %s %s interfejsa"
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr "ako je postavljeno na da, provjerava checksum suid/sgid datoteka."
+msgid "sticky-bit"
+msgstr "sticky-bit"
-#: ../../security/help.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr "ako je postavljeno na da, provjerava prazne ĆĄifre u /etc/shadow."
+msgid "Post Install"
+msgstr "Post Install"
-#: ../../security/help.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "if set to yes, report unowned files."
-msgstr "ako je postavljeno na da, prijavljuje datoteke bez vlasnika."
+msgid "The internal domain name"
+msgstr "Interno domensko ime"
-#: ../../security/help.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the root umask."
-msgstr ""
-"Argumenti: (umask)\n"
-"\n"
-"Postavlja root-ov umask."
+msgid "Card IRQ"
+msgstr "IRQ kartice"
#: ../../security/help.pm:1
#, c-format
msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
+"Arguments: (umask)\n"
"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+"Set the user umask."
msgstr ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
+"Argumenti: (umask)\n"
"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+"Podeơava korisnički umask."
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
+msgid "logdrake"
+msgstr "logdrake"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+"Aplikacija za uvoz i nadzor fontova \n"
+"--windows_import : uvezi sa dostupnih windows particija.\n"
+"--xls_fonts : prikaĆŸi sve postojeće fontove koje prijavljuje xls\n"
+"--strong : jaka provjera fonta.\n"
+"--install : instaliraj bilo koji font ili direktorij.\n"
+"--uninstall : deinstaliraj bilo koji font ili direktorij.\n"
+"--replace : zamijeni font ako vec postoji\n"
+"--application : 0 bez aplikacija.\n"
+" : 1 podrĆĄka za sve poznate aplikacije.\n"
+" : ime_aplikacije kao so za staroffice \n"
+" : i gs za ghostscript za samo tu aplikaciju."
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
+msgid "Choose the floppy drive you want to use to make the bootdisk"
msgstr ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
+"Izaberite disketnu jedinicu koju ĆŸelite koristiti da napravite boot disketu"
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
+msgid "LILO with text menu"
+msgstr "LILO sa tekstualnim menijem"
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
+msgid "Everything (no firewall)"
+msgstr "Sve (bez firewalla)"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
+msgid "You must specify a kernel image"
+msgstr "Morate navesti image kernela"
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
+msgid ", multi-function device on USB"
+msgstr ", viơenamjenski uređaj na USBu"
-#: ../../security/help.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
+msgid "Do"
+msgstr "Uradi"
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "Kontaktiram mirror da bih saznao listu dostupnih paketa..."
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
+msgid "Lithuanian AZERTY (old)"
+msgstr "Litvanska AZERTY (stara)"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
-msgstr ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
+msgid "Brazilian (ABNT-2)"
+msgstr "Brazilska (ABNT-2)"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
-msgstr ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
+msgid "IP address of host/network:"
+msgstr "IP adresa računara/mreĆŸe:"
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"koordinate progresne trake y\n"
+"tj. njenog lijevog ugla"
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
+msgid "System installation"
+msgstr "Instalacija sistema"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
-msgstr ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
+msgid "Saint Vincent and the Grenadines"
+msgstr "Saint Vincent and the Grenadines"
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
+msgid "/File/_Open"
+msgstr "/Datoteka/_Otvori"
#: ../../security/help.pm:1
#, c-format
@@ -13395,954 +12916,836 @@ msgstr ""
"The argument specifies if clients are authorized to connect\n"
"to the X server on the tcp port 6000 or not."
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
-msgstr ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
+msgid "Location of auto_install.cfg file"
+msgstr "Lokacija datoteke auto_install.cfg"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
+msgid "Open Firmware Delay"
+msgstr "Čekanje na Open Firmware"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
+msgid "Hungary"
+msgstr "Mađarska"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
+msgid "Total progess"
+msgstr "Ukupno napredak"
-#: ../../security/help.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
+msgid "Color configuration"
+msgstr "PodeĆĄavanje boje"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
+msgid "New Zealand"
+msgstr "Novi Zeland"
-#: ../../security/help.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
+"Već postoje određena ograničenja, a viơe automatskih provjera se pokreće "
+"svaku noć."
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
+msgid "please choose the date to restore"
+msgstr "molim izaberite datum za vraćanje"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse broadcasted icmp echo."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse broadcasted icmp echo."
+msgid "Switching from ext2 to ext3"
+msgstr "Prebacujem sa ext2 na ext3"
-#: ../../security/help.pm:1
+#: ../../printer/data.pm:1
+#, c-format
+msgid "LPRng"
+msgstr "LPRng"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Netherlands Antilles"
+msgstr "Nizozemski Antili"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Browse to new restore repository."
+msgstr "Browse to new restore repository."
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
"\n"
-"Accept/Refuse bogus IPv4 error messages."
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
msgstr ""
-"Arguments: (arg)\n"
"\n"
-"Accept/Refuse bogus IPv4 error messages."
+"Dobro doơli u Čarobnjak za podeơavanje ơtampača\n"
+"\n"
+"Ovaj čarobnjak vam omogućuje da instalirate lokalne ili udaljene ơtampače "
+"koji će biti koriơteni sa ovog računara, a također i sa drugih računara na "
+"mreĆŸi.\n"
+"\n"
+"On će od vas traĆŸiti sve potrebne informacije kako bi ĆĄtampač bio podeĆĄen, a "
+"vama omogućen pristup svim dostupnim drajverima, opcijama drajvera i vrstama "
+"konekcije ơtampača."
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "Sigurnosni administrator (login ili email)"
+msgid "and %d unknown printers"
+msgstr "i %d nepoznatih ơtampača"
-#: ../../security/level.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"A library which defends against buffer overflow and format string attacks."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
msgstr ""
-"Biblioteka koja brani od napada \"buffer overflow\" i \"format string\"."
+"Rani Intel Pentium procesori imaju bug u numeričkom koprocesoru koji ne "
+"postiĆŸe potrebnu preciznost prilikom izvrĆĄavanja dijeljenja sa tekućim "
+"zarezom (FDIV)"
-#: ../../security/level.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Use libsafe for servers"
-msgstr "Koristi libsafe za servere"
+msgid "No ISDN PCI card found. Please select one on the next screen."
+msgstr ""
+"Nije pronađena nijedna ISDN PCI kartica. Molimo izaberite jednu na idućem "
+"ekranu."
-#: ../../security/level.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Security level"
-msgstr "Nivo sigurnosti"
+msgid "GB"
+msgstr "GB"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Please choose the desired security level"
-msgstr "Molim izaberite nivo sigurnosti"
+msgid "Please give a user name"
+msgstr "Molimo navedite korisničko ime"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "DrakSec Basic Options"
-msgstr "DrakSec osnovne opcije"
+msgid "Enable CD Boot?"
+msgstr "Omogući boot sa CDa?"
-#: ../../security/level.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Baziran na prethodnom nivou, ali sada je sistem potpuno zatvoren.\n"
-"Sigurnosne osobine na maksimumu."
+msgid " enter `void' for void entry"
+msgstr " unesite `void' za prazan unos"
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"Sa ovim sigurnosnim nivoom, postaje moguće koristiti ovaj sistem kao "
-"server.\n"
-"Sigurnost je sada dovoljno visoka za upotrebu sistema kao servera koji "
-"prima\n"
-"konekcije sa mnogo klijenata. Napomena: ako je vaơ računar samo klijent na "
-"Internetu, moĆŸda je bolje da izaberete niĆŸi nivo."
+msgid "on Hard Drive"
+msgstr "na hard disk"
-#: ../../security/level.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Već postoje određena ograničenja, a viơe automatskih provjera se pokreće "
-"svaku noć."
+msgid "Winmodem connection"
+msgstr "Winmodem konekcija"
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
+"\n"
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
msgstr ""
-"Ovo je standardna sigurnost koja je preporučena za računar koji će biti "
-"koriĆĄten za spajanje na Internet kao klijent."
+"\n"
+"Čestitamo, vaơ ơtampač je sada instaliran i podeơen!\n"
+"\n"
+"MoĆŸete ĆĄtampati koristeći komandu \"Ć tampaj\" u vaĆĄoj aplikaciji (obično se "
+"nalazi u meniju \"Datoteka).\n"
+"\n"
+"Ako ĆŸelite dodati, ukloniti ili promijeniti ime ĆĄtampača, ili ako ĆŸelite "
+"promijeniti neke podrazumjevane postavke (ulazni put papira, kvaliteta "
+"ơtampe...), izaberite opciju \"Ơtampač\" u \"Hardware\" sekciji Mandrake "
+"Kontrolnog centra."
-#: ../../security/level.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
+"Arguments: (arg)\n"
+"\n"
+"Set the password history length to prevent password reuse."
msgstr ""
-"Ć ifra je sada aktivirana, ali koriĆĄtenje za mreĆŸni računar joĆĄ nije "
-"preporučeno."
+"Arguments: (arg)\n"
+"\n"
+"Set the password history length to prevent password reuse."
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ovaj nivo treba koristiti paĆŸljivo. On čini vaĆĄ sistem lakĆĄim za upotrebu,\n"
-"ali vrlo osjetljivim: ne smije biti koriơten za računar koji je spojen na\n"
-"druge ili na Internet. Nema pristupa ĆĄifrom."
+msgid "Now, you can run xawtv (under X Window!) !\n"
+msgstr "Sada moĆŸete pokrenuti xawtv (pod X Window sistemom!) !\n"
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Paranoid"
-msgstr "Paranoičan"
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr ""
+"Nemam dovoljno swap prostora da dovrĆĄim instalaciju, molimo dodajte joĆĄ"
-#: ../../security/level.pm:1
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Higher"
-msgstr "ViĆĄi"
+msgid "%s on %s"
+msgstr "%s na %s"
-#: ../../security/level.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
+"GNU/Linux koristi vrijeme u GMT (Greenwich Mean Time) obliku i prevodi ga\n"
+"u lokalno vrijeme u skladu sa vremenskom zonom koju ste izabrali. Ako je "
+"sat\n"
+"na vaĆĄoj matičnoj ploči podeĆĄen na lokalno vrijeme, moĆŸete isključiti ovu\n"
+"opciju isključujući \"Hardverski sat podeơen na GMT\", ơto će saopơtiti\n"
+"GNU/Linuxu da su sistemski sat i hardverski sat u istoj vremenskoj zoni.\n"
+"Ovo je korisno kada se na računaru takođe nalazi i drugi operativni sistem\n"
+"kao ĆĄto je Windows.\n"
+"\n"
+"Opcija \"Automatsko usklađivanje vremena\" će automatski regulisati sat\n"
+"spajajući se na udaljeni time server na Internetu. Kako bi ova mogućnost\n"
+"radila, morate imati ispravnu Internet konekciju. Najbolje je izabrati time "
+"server\n"
+"negdje u vaơoj blizini. Ova opcija će ustvari instalirati time server koji "
+"mogu\n"
+"koristiti i drugi računari u vaĆĄoj lokalnoj mreĆŸi."
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "High"
-msgstr "Visok"
+msgid "Which is your timezone?"
+msgstr "Koja je vaĆĄa vremenska zona?"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Poor"
-msgstr "LoĆĄ"
+msgid "Guinea"
+msgstr "Gvineja"
-#: ../../security/level.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Welcome To Crackers"
-msgstr "DobrodoĆĄli u Crackers"
+msgid "The system is now connected to the Internet."
+msgstr "Sistem je sada spojen na Internet."
-#: ../../standalone/XFdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Molimo ponovo se prijavite na %s radi aktiviranja izmjena"
+msgid "South Georgia and the South Sandwich Islands"
+msgstr "South Georgia i South Sandwich ostrva"
-#: ../../standalone/XFdrake:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Molimo izvrĆĄite logout i zatim koristitite Ctrl-Alt-BackSpace"
+msgid "Japan (broadcast)"
+msgstr "Japan (broadcast)"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
-msgstr "/etc/hosts.allow i /etc/hosts.deny su već podeơeni - bez izmjene"
+msgid "Mozambique"
+msgstr "Mozambik"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "Najprije treba napraviti /etc/dhcpd.conf !"
+msgid "Icon"
+msgstr "Ikona"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "NeĆĄto je pogreĆĄno! - Da li je instaliran mkisofs?"
+msgid "Please choose what you want to backup"
+msgstr "Molim izaberite ĆĄta ĆŸelite backupovati"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr "Etherboot ISO image je %s"
+msgid "256 colors (8 bits)"
+msgstr "256 boja (8 bita)"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "No floppy drive available!"
-msgstr "Nema pogodne disketne jedinice!"
+msgid "Read-write"
+msgstr "Čitaj-piơi"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Floppy can be removed now"
-msgstr "Sada moĆŸete izvaditi disketu"
+msgid "Size: %s\n"
+msgstr "Veličina: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Couldn't access the floppy!"
-msgstr "Ne mogu pristupiti disketi!"
+msgid "Hostname: "
+msgstr "Hostname: "
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please insert floppy disk:"
-msgstr "Molimo ubacite disketu:"
+msgid "Chunk size %s\n"
+msgstr "Veličina chunka %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Write Config"
-msgstr "ZapiĆĄi konfiguraciju"
+msgid "Build the future of Linux!"
+msgstr "Izgradite budućnost Linuxa!"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr "Raspon dinamičkih IP adresa:"
+msgid "Local Printer"
+msgstr "Lokalni ơtampač"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
msgstr ""
-"Većinu ovih vrijednosti uzimam iz\n"
-"vaĆĄeg aktivnog sistema.\n"
-"MoĆŸete ih izmijeniti po potrebi."
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "PodeĆĄavanje dhcpd servera"
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "IP Range End:"
-msgstr "Kraj IP raspona:"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgstr "[--file=mojfajl] [--word=mojarijec] [--explain=regexp] [--alert]"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "IP Range Start:"
-msgstr "Početak IP raspona:"
+msgid "ADSL connection"
+msgstr "ADSL konekcija"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Name Servers:"
-msgstr "DNS serveri:"
+msgid "No configuration, please click Wizard or Advanced.\n"
+msgstr "Bez podeơavanja, molim kliknite na Čarobnjak ili Napredno.\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Domain Name:"
-msgstr "Ime domena:"
+msgid "Error!"
+msgstr "GreĆĄka!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Broadcast Address:"
-msgstr "Broadcast adresa:"
+msgid "cable connection detected"
+msgstr "otkrivena kablovska konekcija"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Subnet Mask:"
-msgstr "Subnet mask:"
+msgid "Permission denied transferring %s to %s"
+msgstr "Pristup odbijen pri prenosu %s na %s"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Routers:"
-msgstr "Routeri:"
+msgid "/_Report Bug"
+msgstr "/_Prijavi greĆĄku"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Netmask:"
-msgstr "Netmask:"
+msgid "Resize"
+msgstr "Smanji"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Subnet:"
-msgstr "Subnet:"
+msgid "Dominica"
+msgstr "Dominika"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
-msgstr ""
-"Morate restartovati Display Manager da bi izmjene stupile na snagu. \n"
-"(na konzoli restartujte dm servis)"
+msgid "Please enter the device name to use for backup"
+msgstr "Molim unesite ime uređaja kojeg ćete koristiti za backup"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "dhcpd Config..."
-msgstr "dhcpd podeĆĄavanje..."
+msgid "Resolution: %s\n"
+msgstr "Rezolucija: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Delete Client"
-msgstr "ObriĆĄi klijent"
+msgid "matching"
+msgstr "matching"
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
#, c-format
-msgid "<-- Edit Client"
-msgstr "<-- Izmijeni klijent"
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
+msgstr ""
+"Ne mogu pristupiti kernelskim modulima koji odgovaraju vaĆĄem kernelu "
+"(nedostaje datoteka %s), ơto obično znači da je vaơa boot disketa zastarjela "
+"u odnosu na instalacioni medij (napravite noviju boot disketu)"
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
-msgid "Add Client -->"
-msgstr "Dodaj klijenta -->"
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"Molimo izaberite ispravan port. Na primjer, \"COM1\" port pod Windows\n"
+"operativnim sistemom, pod GNU/Linuxom se zove \"ttyS0\" ."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Allow Thin Clients"
-msgstr "Omogući thin klijente"
+msgid "The following packages are going to be removed"
+msgstr "Sljedeći paketi će biti uklonjeni"
-#: ../../standalone/drakTermServ:1
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
#, c-format
-msgid "Thin Client"
-msgstr "Thin klijenti"
+msgid "Connect to the Internet"
+msgstr "Spoji se na Internet"
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "No net boot images created!"
-msgstr "Nije napravljena boot image!"
+msgid "Use existing partitions"
+msgstr "Koristi postojeću particiju"
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "type: %s"
-msgstr "tip: %s"
+msgid "Canadian (Quebec)"
+msgstr "Kanadska (Kvebek)"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "<-- Del User"
-msgstr "<-- ObriĆĄi korisnika"
+msgid "Mouse device: %s\n"
+msgstr "Uređaj miơa: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Add User -->"
-msgstr "Dodaj korisnika -->"
+msgid "Reselect correct fonts"
+msgstr "Ponovo izaberi ispravne fontove"
-#: ../../standalone/drakTermServ:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
+"Options Description:\n"
+"\n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
+"\n"
msgstr ""
-"!!! Određuje ơifru u sistemskoj bazi podataka koja se razlikuje\n"
-"od one u bazi podataka Terminal Servera.\n"
-"Obriơite i ponovo dodajte korisnika u Terminal Server da biste omogućili "
-"pristup."
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Delete All NBIs"
-msgstr "ObriĆĄi sve NBIje"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "<-- Delete"
-msgstr "<-- ObriĆĄi"
+"options description:\n"
+"\n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
+"\n"
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "This will take a few minutes."
-msgstr "Ovo će potrajati par minuta."
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
+msgstr ""
+"Konačno, bićete upitani da li ĆŸelite vidjeti grafički interfejs nakon "
+"pokretanja.\n"
+"Primjetite da vam je ovo pitanje postavljeno čak i ako izaberete da nećete\n"
+"testirati konfiguraciju. Očito, trebate odgovoriti \"Ne\" ako će vaơ "
+"računar\n"
+"imati ulogu servera ili ako imate problema sa podeĆĄavanjem ekrana."
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Build All Kernels -->"
-msgstr "Izgradi sve kernele -->"
+msgid "We are now going to configure the %s connection."
+msgstr "Sada ćemo podesiti konekciju %s."
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "No NIC selected!"
-msgstr "Nije izabran nijedan NIC!"
+msgid "MandrakeExpert Corporate"
+msgstr "MandrakeExpert Corporate"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Build Single NIC -->"
-msgstr "Izgradi jedan NIC -->"
+msgid ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
+msgstr ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake rezolucija"
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "No kernel selected!"
-msgstr "Nije izabran kernel!"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Write protection"
+msgstr "Auto prepoznavanje ơtampača"
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Build Whole Kernel -->"
-msgstr "Izgradi cijeli kernel -->"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "You've not selected any font"
+msgstr "ne mogu naći nijedan font.\n"
-#: ../../standalone/drakTermServ:1
+#: ../../steps.pm:1
#, c-format
-msgid "Boot ISO"
-msgstr "Boot ISO"
+msgid "Language"
+msgstr "Jezik"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Boot Floppy"
-msgstr "Boot disketa"
+msgid "Printer model selection"
+msgstr "Izbor modela ơtampača"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
-"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
-"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
-"\n"
+"After changing type of partition %s, all data on this partition will be lost"
msgstr ""
+"Nakon promjene tipa particije %s, svi podaci na ovoj particiji će biti "
+"izgubljeni"
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-" Hvala:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+msgid "%d seconds"
+msgstr "%d sekundi"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
-msgstr ""
-"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
+msgid "Insert a blank floppy in drive %s"
+msgstr "Ubacite praznu disketu u jedinicu %s"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Add/Del Clients"
-msgstr "Dodaj/obriĆĄi klijente"
+msgid "A valid URI must be entered!"
+msgstr "Trebate unijeti ispravan URI!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Add/Del Users"
-msgstr "Dodaj/obriĆĄi korisnike"
+msgid "Found \"%s\" interface do you want to use it ?"
+msgstr "PronaĆĄao sam interfejs \"%s\". Ćœelite li ga koristiti ?"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Net Boot Images"
-msgstr "Net Boot Images"
+msgid "Re-configure interface and DHCP server"
+msgstr "Ponovo podesi interfejs i DHCP server"
-#: ../../standalone/drakTermServ:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "Etherboot Floppy/ISO"
+msgid "Sound configuration"
+msgstr "PodeĆĄavanje zvuka"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Stop Server"
-msgstr "Zaustavi server"
+msgid "Photo test page"
+msgstr "Foto testna strana"
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Start Server"
-msgstr "Pokreni server"
+msgid "Custom disk partitioning"
+msgstr "Ručno particioniranje diska"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disable Server"
-msgstr "Onemogući server"
+msgid "Enter Printer Name and Comments"
+msgstr "Unesite ime ơtampača i komentare"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Enable Server"
-msgstr "Omogući server"
+msgid ""
+"The following printers\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr ""
+"Sljedeći ơtampači\n"
+"\n"
+"%s%s\n"
+"su direktno spojeni na vaĆĄ sistem"
#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "PodeĆĄavanje Mandrake Terminal servera"
+msgid "type: %s"
+msgstr "tip: %s"
-#: ../../standalone/drakautoinst:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Remove the last item"
-msgstr "Ukloniti zadnju stavku"
+msgid "Slovakian (QWERTY)"
+msgstr "Slovačka (QWERTY)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Add an item"
-msgstr "Dodaj stavku"
+msgid "No Sound Card detected!"
+msgstr "Nije izabrana zvučna kartica!"
-#: ../../standalone/drakautoinst:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "Auto Install"
-msgstr "Auto instalacija"
+msgid "Mouse Port"
+msgstr "Port miĆĄa"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
msgstr ""
-"Disketa je uspjeĆĄno napravljena.\n"
-"Sada moĆŸete ponoviti vaĆĄu instalaciju."
+"Morate restartovati Display Manager da bi izmjene stupile na snagu. \n"
+"(na konzoli restartujte dm servis)"
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Congratulations!"
-msgstr "Čestitamo!"
+msgid "Ftp Server"
+msgstr "FTP server"
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+"Enable/Disable msec hourly security check."
msgstr ""
+"Arguments: (arg)\n"
"\n"
-"Dobro doĆĄli.\n"
-"\n"
-"Parametri automatske instalacije su dostupni u odjeljcima lijevo"
+"Enable/Disable msec hourly security check."
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Creating auto install floppy"
-msgstr "Pravim auto instalacijsku disketu"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "%s fonts conversion"
+msgstr "pfm fonts konverzija"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the type of bus on which the mouse is connected"
+msgstr "Vrsta sabirnice na koju je spojen miĆĄ"
+
+#: ../../lang.pm:1
#, c-format
-msgid "manual"
-msgstr "ručno"
+msgid "Uganda"
+msgstr "Uganda"
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
+"Arguments: (size)\n"
+"\n"
+"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
-"Molimo izaberite za svaki korak da li ćete ga ponoviti kao i u vaơoj "
-"instalaciji ili će se obaviti ručno"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Automatska konfiguracija koraka"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "replay"
-msgstr "ponovi"
+"Argumenti: (size)\n"
+"\n"
+"Postavlja veličinu historije naredbi shella. Vrijednost -1 znači "
+"neograničeno."
-#: ../../standalone/drakautoinst:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
"\n"
-"Do you want to continue?"
-msgstr ""
-"Sada ćete podesiti Auto Instalacijsku disketu. Ova opcija je pomalo opasna i "
-"mora biti koriĆĄtena uz paĆŸnju.\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
"\n"
-"Sa ovom opcijom bićete u mogućnosti da ponovite instalaciju koju ste obavili "
-"na ovom računaru, pri ćemu ćete biti interaktivno upitani za neke korake, "
-"kako biste promijenili njihove vrijednosti.\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
"\n"
-"Za maksimalnu sigurnost, particioniranje i formatiranje nikad neće biti "
-"obavljeno automatski, bez obzira ĆĄta izaberete tokom instalacije na ovaj "
-"računar.\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
"\n"
-"Da li ĆŸelite nastaviti?"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "PodeĆĄavanje auto instalacije"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Ne mogu pronaći potrebnu image datoteku '%s'"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Error!"
-msgstr "GreĆĄka!"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
"\n"
-"Restore Backup Problems:\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
"\n"
-"Restore Backup Problems:\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
+"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
+"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
msgstr ""
-"options description:\n"
+"\"DrakX će vam pruĆŸiti saĆŸetak raznih informacija koje su prikupljene\n"
+"o vaĆĄem sistemu. Ovisno o instaliranom hardveru, vjerovatno imate\n"
+"neke ili sve od navedenih stavki. Pojedinačna stavka se sastoji od\n"
+"onoga ĆĄto je potrebno podesiti, nakon čega slijedi kraći saĆŸetak trenutne\n"
+"konfiguracije. Da biste ovo izmijenili, kliknite na odgovarajuće dugme "
+"\"Podesi\".\n"
"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+"* \"Tastatura\": provjerite trenutno mapu tastature i izmijenite je ako je\n"
+"potrebno.\n"
"\n"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"Description:\n"
+"* \"DrĆŸava\": provjerite trenutno izabranu drĆŸavu. Ako se nalazite negdje\n"
+"drugo, kliknite na dugme \"Podesi\" i izaberite neku drugu. Ako se vaĆĄa\n"
+"zemlja ne nalazi na prikazanoj listi, kliknite na dugme \"ViĆĄe\" da biste\n"
+"dobili cjelokupnu listu zemalja.\n"
"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
+"* \"Vremenska zona\": DrakX automatski određuje vaơu vremensku zonu\n"
+"na osnovu drĆŸave koju ste izabrali. MoĆŸete kliknuti na dugme \"Podesi\"\n"
+"ako ovo nije ispravno.\n"
"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
+"* \"MiĆĄ\": provjerite trenutnu konfiguraciju miĆĄa i klinire na dugme da je\n"
+"promijenite ako je to potrebno.\"\n"
"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
+"* \"Ơtampač\": klikanjem na dugme \"Podesi\" otvoriće se čarobnjak za\n"
+"podeơavanje ơtampača. Pogledajte odgovarajuće poglavlje ''Vodiča za\n"
+"početnike'' za viơe informacija o podeơavanju novog ơtampača. Interfejs\n"
+"koji je tamo prikazan je sličan onom koji će biti koriơten tokom "
+"instalacije.\n"
"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
+"* \"Zvučna kartica\": ako je na vaơem sistemu otkrivena zvučna kartica, ona "
+"će\n"
+"biti prikazana ovdje. Ako primjetite da prikazana zvučna kartica nije ona\n"
+"koja je ustvari dio vaĆĄeg sistema, moĆŸete kliknuti na dugme i odabrati neki\n"
+"drugi drajver.\n"
"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"* \"Grafički interfejs\": DrakX će podesiti vaơ grafički interfejs za rad "
+"na\n"
+"rezoluciji \"800x600\" ili \"1024x768\". Ako vam to ne odgovara, kliknite\n"
+"na dugme \"Podesi\" kako biste drugačije podesili vaơ interfejs.\n"
"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
+"* \"TV kartica\": ako je na vaơem sistemu prepoznata TV kartica, biće\n"
+"prikazana ovdje. Ako imate TV karticu koja nije prepoznata, kliknite na\n"
+"dugme \"Podesi\" kako biste pokuơali podesiti je ručno.\n"
"\n"
+"* \"ISDN kartica\": ako je na vaĆĄem sistemu otkrivena ISDN kartica, ona\n"
+"će biti prikazana ovdje. MoĆŸete kliknuti na dugme \"Podesi\" da promijenite\n"
+"parametre vezane za nju.\n"
"\n"
-msgstr ""
-"Description:\n"
+"* \"MreĆŸa\": ako ĆŸelite, moĆŸete podesiti vaĆĄ Internet pristup ili pristup\n"
+"lokalnoj mreĆŸi.\n"
"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
+"* \"Nivo sigurnosti\": ovdje moĆŸete promijeniti nivo sigurnosti sistema "
+"koji\n"
+"je podeĆĄen ranije.\n"
"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
+"* \"Firewall\": ako planirate povezati vaơ računar na Internet, pametno je\n"
+"zaơtititi ga od upada postavljanjem firewalla. Pogledajte odgovarajuće\n"
+"poglavlje ''Vodiča za početnike'' za detalje o podeơavanju firewalla.\n"
"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
+"* \"Bootloader\": ako ĆŸelite promijeniti postavke bootloadera, kliknite na "
+"to\n"
+"dugme. Ovo bi trebalo biti rezervisano za napredne korisnike.\n"
"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
+"* \"Servisi\": ovdje moĆŸete fino podeĆĄavati koji servisi će biti pokrenuti "
+"na\n"
+"vaơem računaru. Ako planirate koristiti ovaj računar kao server, dobra je\n"
+"ideja joĆĄ jednom pregledati ove postavke."
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Comoros"
+msgstr "Komori"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid ""
"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
"\n"
"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
+"We are now going to configure the %s connection.\n"
+"\n"
+"\n"
+"Press OK to continue."
+msgstr ""
+"\n"
+"\n"
+"\n"
+"Sada ćemo podesiti konekciju %s.\n"
"\n"
"\n"
+"Pritisnite OK za nastavak."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Yaboot mode"
+msgstr "Yaboot mod"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
+msgstr "USA (kablovska)"
+
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+"Ne mogu pokrenuti LiLo!\n"
+"IzvrĆĄite \"lilo\" kao root u komandnoj liniji da dovrĆĄite instalaciju LiLo "
+"teme."
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "OpĆĄti miĆĄ sa 3 dugmeta"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
-msgstr ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+msgid "Select another media to restore from"
+msgstr "Izaberite drugi medij za vraćanje"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Software Manager"
+msgstr "Upravljanje programima"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
-"restore description:\n"
+"Restore Description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
@@ -14354,17 +13757,19 @@ msgid ""
"\n"
" - Incremental Backups:\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
msgstr ""
"restore description:\n"
@@ -14392,4667 +13797,5329 @@ msgstr ""
"\n"
"\n"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
+msgid "Re-submit"
+msgstr "Ponovo poĆĄalji"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Neke greĆĄke prilikom slanja poruka moĆŸe izazvati \n"
-" loĆĄe podeĆĄen postfix. Ovo moĆŸete rijeĆĄiti tako ĆĄto ćete\n"
-" podesiti myhostname ili mydomain u /etc/postfix/main.cf\n"
-"\n"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
+msgid "CD in place - continue."
+msgstr "CD na mjestu - nastavljam."
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Drakbackup"
-msgstr "Drakbackup"
+msgid "KB"
+msgstr "KB"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restore"
-msgstr "Vrati"
+msgid "Network & Internet"
+msgstr "MreĆŸa i Internet"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup Now"
-msgstr "Backup-uj sada"
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Litvanska \"fonetska\" QWERTY"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Advanced Configuration"
-msgstr "Napredno podeĆĄavanje"
+msgid "Net Boot Images"
+msgstr "Net Boot Images"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Wizard Configuration"
-msgstr "Čarobnjak za podeơavanje"
+msgid "Sharing of local scanners"
+msgstr "Dijeljenje lokalnih skenera"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "View Backup Configuration."
-msgstr "Pogledaj postavke backupa."
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr ""
+"Plug'n'Play probanje nije uspjelo. Molim izaberite odgovarajući monitor"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Backup Now from configuration file"
-msgstr "Backup-uj sada iz konfiguracijske datoteke"
+msgid "Services and deamons"
+msgstr "Servisi i demoni"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Drakbackup Configuration"
-msgstr "PodeĆĄavanje Drakbackup-a"
+msgid "Remote host name missing!"
+msgstr "Ime udaljenog računara nedostaje!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Total Progress"
-msgstr "Ukupan napredak"
+msgid "with /usr"
+msgstr "sa /usr"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sending files..."
-msgstr "Ć aljem datoteke..."
+msgid "Network"
+msgstr "MreĆŸa"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "files sending by FTP"
-msgstr "slanje datoteka putem FTPa"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgstr "Automatski prepoznaj ơtampače spojene na Microsoft Windows računare"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup other files"
-msgstr "Backup ostalih datoteka"
+msgid "This password is too simple"
+msgstr "Ova ĆĄifra je previĆĄe jednostavna"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup user files"
-msgstr "Backup korisničkih datoteka"
+msgid "Slovakian (QWERTZ)"
+msgstr "Slovačka (QWERTZ)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "Backup system files"
-msgstr "Backup sistemskih datoteka"
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
+"Pisanje i izmjena programa u raznim jezicima kao ĆĄto su Perl, Python, C i C+"
+"+ nikad nije bilo lakơe, zahvaljujući GNU gcc 3 i najboljim Open Source "
+"razvojnim okolinama."
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Under Devel ... please wait."
-msgstr "U izradi ... molim sačekajte."
+msgid "Truly minimal install (especially no urpmi)"
+msgstr "Stvarno minimalna instalacija (posebno bez urpmi)"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+" Transfer \n"
+"Now"
msgstr ""
-"Nije pronađena konfiguraciona datoteka \n"
-"molim kliknite na Čarobnjak ili Napredno."
+" Prebaci \n"
+"odmah"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please select data to backup..."
-msgstr "Molim izaberite podatke za backup..."
+msgid "Use daemon"
+msgstr "Koristi demon"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
#, c-format
-msgid "Please select media for backup..."
-msgstr "Molim izaberite medij za backup..."
+msgid "Authentication"
+msgstr "Autentikacija"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please select data to restore..."
-msgstr "Molim izaberite podatke za vraćanje..."
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Dodaj ovaj ơtampač u Star Office/OpenOffice.org/GIMP"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Sljedeći paketi trebaju biti instalirani:\n"
+msgid "Additional CUPS servers: "
+msgstr "Dodatni CUP serveri:"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
-"GreĆĄka tokom slanja datoteke preko FTPa.\n"
-" Molimo ispravite vaĆĄu FTP konfiguraciju."
+"Izaberite jedan od automatski prepoznatih ơtampača sa liste ili unesite ime "
+"računara ili IP i opcionalno broj porta (podrazumjeva se 9100) u polja za "
+"unos."
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount %s?"
+msgstr "Gdje ĆŸelite montirati uređaj %s?"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Restore Via Network"
+msgstr "Vrati putem mreĆŸe"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Algeria"
+msgstr "AlĆŸir"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd-size"
+msgstr "Initrd-veličina"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
-"GreĆĄka tokom sendmaila.\n"
-" VaĆĄ mail izvjeĆĄtaj nije poslan.\n"
-" Molim podesite sendmail"
+"U slučaju da postoji viơe servera za vaơu karticu, sa ili bez 3D\n"
+"ubrzanja, predloĆŸen vam je server koji najbolje odgovara vaĆĄim\n"
+"potrebama."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Next"
-msgstr "Sljedeći"
+msgid "\tBackups use tar and gzip\n"
+msgstr "\tBackupi koriste tar i gzip\n"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Previous"
-msgstr "Prethodni"
+msgid "2 MB"
+msgstr "2 MB"
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Save"
-msgstr "Spasi"
+msgid ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
+"[OPTION]...\n"
+" --no-confirmation ne postavljaj prvo pitanje u MandrakeUpdate modu\n"
+" --no-verify-rpm ne provjeravaj potpise paketa\n"
+" --changelog-first prikaĆŸi changelog prije filelist u opisnom prozoru\n"
+" --merge-all-rpmnew predloĆŸi merge svih pronađenih .rpmnew/.rpmsave "
+"datoteka"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build Backup"
-msgstr "Izgradi backup"
+msgid "Setting Default Printer..."
+msgstr "Postavljam podrazumjevani ơtampač..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Restore Progress"
-msgstr "Napredak vraćanja"
+msgid "Interface %s (using module %s)"
+msgstr "Interfejs %s (koristeći modul %s)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Restore From Catalog"
-msgstr "Vrati iz kataloga"
+msgid "Name: %s\n"
+msgstr "Ime: %s\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Browse to new restore repository."
-msgstr "Browse to new restore repository."
+msgid "Generating preview ..."
+msgstr "GeneriĆĄem pregled..."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "CD in place - continue."
-msgstr "CD na mjestu - nastavljam."
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
+msgstr ""
+"Frekvencija bi trebala imati zavrĆĄetak k, M ili G (na primjer, \"2.46G\" za "
+"frekvenciju 2.46 GHz) ili dodajte odgovarajući broj nula (0)."
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Custom Restore"
-msgstr "Ručno vraćanje"
+msgid "serial"
+msgstr "serijski"
-#: ../../standalone/drakbackup:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Restore all backups"
-msgstr "Vrati sve backupe"
+msgid "DVD-ROM"
+msgstr "DVD-ROM"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Failed..."
-msgstr "Vraćanje nije uspjelo..."
+msgid "Georgian (\"Latin\" layout)"
+msgstr "Gruzijska (\"latinični\" izgled)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Files Restored..."
-msgstr "Vraćene datoteke..."
+msgid "Get the best items with Mandrake Linux Strategic partners"
+msgstr "Nabavite najbolje proizvode kod strateĆĄkih partnera Mandrake Linuxa"
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Path or Module required"
-msgstr "Potrebna je staza ili modul"
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
+msgstr ""
+"Sada moĆŸete navesti opcije za modul %s.\n"
+"Obratite paĆŸnju da adrese trebate unositi sa prefiksom 0x kao npr. '0x123'"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Hostname required"
-msgstr "Potrebno ime računara"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
+msgstr ""
+"Mandrake Linux 9.1 vam pruĆŸa Mandrake Kontrolni centar, moćan alata koji "
+"potpuno prilagođuje vaơ računar namjeni koju ste odredili za njega. Podesite "
+"i prilagodite elemente kao ơto je nivo sigurnosti,periferni uređaji (ekran, "
+"miĆĄ, tastatura...), Internet konekciju i mnoge druge stvari!"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Username required"
-msgstr "Potrebno korisničko ime"
+msgid "Kenya"
+msgstr "Kenija"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Password required"
-msgstr "Potrebna ĆĄifra"
+msgid "Use ``Unmount'' first"
+msgstr "Najprije koristite ``Demontiraj''"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Host Path or Module"
-msgstr "Staza ili modul računara"
+msgid "Installing mtools packages..."
+msgstr "Instaliram mtools pakete..."
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Host Name"
-msgstr "Ime računara"
+msgid "You must specify a root partition"
+msgstr "Morate navesti root particiju"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr "Restore putem mreĆŸnog protokola: %s"
+msgid "first step creation"
+msgstr "kreiranje prvog koraka"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Via Network"
-msgstr "Vrati putem mreĆŸe"
+msgid "Both Shift keys simultaneously"
+msgstr "Obje Shift tipke istovremeno"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr "Neispravna oznaka trake. Oznaka je %s."
+msgid "Select a scanner model"
+msgstr "Izaberite model skenera"
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-"Ubacite traku sa oznakom %s u kasetni\n"
-"uređaj %s"
+msgid "LPRng - LPR New Generation"
+msgstr "LPRng - LPR New Generation"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore From Tape"
-msgstr "Vrati sa trake"
+msgid "Drakbackup Configuration"
+msgstr "PodeĆĄavanje Drakbackup-a"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr "Neispravna oznaka CDa. Oznaka diska je %s."
+msgid "Save as.."
+msgstr "Sačuvaj kao..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
msgstr ""
-"Ubacite CD sa oznakom %s u CD\n"
-"jedinicu pod tačkom montiranja /mnt/cdrom"
+"Interfejs joĆĄ nije podeĆĄen.\n"
+"Pokrenite čarobnjak za podeơavanje u glavnom prozoru"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore From CD"
-msgstr "Vrati sa CDa"
+msgid "Korea (North)"
+msgstr "Koreja (Sjeverna)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup files not found at %s."
-msgstr "Backup datoteke nisu pronađene na %s."
+msgid "Autologin"
+msgstr "Autologin"
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Change\n"
-"Restore Path"
-msgstr ""
-"Promijeni\n"
-"stazu vraćanja"
+msgid "System configuration"
+msgstr "PodeĆĄavanje sistema"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Domain Admin Password"
+msgstr "Administratorska ĆĄifra domena"
+
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Files"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
msgstr ""
-"Vrati izabrane\n"
-"datoteke"
+"Prilagodite savrơeno svoj računar vaơim potrebama pomoću 11 dosupnih "
+"Mandrake Linux korisničkih okolina koje se mogu potpuno prilagoditi: KDE "
+"3.1, GNOME 2.2, Window Maker, ..."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Configuring printer ..."
+msgstr "Podeơavam ơtampač ..."
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
-"Vrati izabrane\n"
-"stavke katologa"
+"Da bi se osigurao integritet podataka nakon promjene veličine, \n"
+"prilikom idućeg pokretanja Windows(TM) biće izvrơena provjera datotečnog "
+"sistema"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Remove user directories before restore."
-msgstr "Pobriơi korisničke direktorije prije vraćanja."
+msgid "MB"
+msgstr "MB"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Izvrơi novi backup prije vraćanja (samo za inkrementalni backup.)"
+msgid "if set to yes, run some checks against the rpm database."
+msgstr "ako je postavljeno na da, izvrĆĄava neke provjere rpm baze podataka."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "select path to restore (instead of /)"
-msgstr "izaberite stazu za vraćanje (umjesto / )"
+msgid "Virgin Islands (British)"
+msgstr "Djevičanska ostrva (Britanska)"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore Other"
-msgstr "Vrati ostalo"
+msgid "Bermuda"
+msgstr "Bermuda"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Restore Users"
-msgstr "Vrati korisnike"
+msgid "click here if you are sure."
+msgstr "kliknite ovdje ako ste sigurni."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore system"
-msgstr "Vrati sistem"
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
+msgstr ""
+"Nije pronađena konfiguraciona datoteka \n"
+"molim kliknite na Čarobnjak ili Napredno."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"Ovdje su navedene Linux particije koje već postoje na vaơem hard disku.\n"
+"MoĆŸete zadrĆŸati izbore koje je napravio čarobnjak, poĆĄto su oni dobri za\n"
+"najveći broj instalacija. Ako napravite neke izmjene, morate, ako niơta "
+"drugo,\n"
+"definisati root particiju (\"/\"). Nemojte izabrati premalu particiju ili "
+"nećete\n"
+"moći instalirati dovoljno softvera. Ako ĆŸelite drĆŸati vaĆĄe podatke na "
+"zasebnoj\n"
+"particiji, trebate takođe napraviti \"/home\" particiju (ơto je moguće samo "
+"ako\n"
+"imate viĆĄe od jedne Linux particije na raspolaganju).\n"
+"\n"
+"Svaka particija je navedena ovako: \"Ime\", \"Kapacitet\".\n"
+"\n"
+"\"Ime\" se sastoji od: \"vrsta hard diska\", \"broj hard diska\", \"broj\n"
+"particije\" (na primjer, \"hda1\").\n"
+"\n"
+"\n"
+"\"Vrsta hard diska\" je \"hd\" ako je vaĆĄ hard disk IDE, a \"sd\" ako je\n"
+"u pitanju SCSI hard disk.\n"
+"\n"
+"\"Broj hard diska\" je uvijek slovo nakon \"hd\" ili \"sd\". Kod IDE hard\n"
+"diskova:\n"
+"\n"
+" * \"a\" znači \"master hard disk na primarnom IDE kontroleru\";\n"
+"\n"
+" * \"b\" znači \"slave hard disk na primarnom IDE kontroleru\";\n"
+"\n"
+" * \"c\" znači \"master hard disk na sekundarnom IDE kontroleru\";\n"
+"\n"
+" * \"d\" znači \"slave hard disk na sekundarnom IDE kontroleru\";\n"
+"\n"
+"Kod SCSI hard diskova, \"a\" je \"disk sa najniĆŸim SCSI IDom\", \"b\"\n"
+"je \"drugi najniĆŸi SCSI ID\", itd."
+
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Other Media"
-msgstr "Drugi medij"
+msgid "Remove"
+msgstr "PobriĆĄi"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select another media to restore from"
-msgstr "Izaberite drugi medij za vraćanje"
+msgid "Lesotho"
+msgstr "Lesoto"
-#: ../../standalone/drakbackup:1
+#: ../../ugtk2.pm:1
#, c-format
-msgid "Please enter the directory where backups are stored"
-msgstr "Molim unesite direktorij gdje su smjeĆĄteni backupi"
+msgid "utopia 25"
+msgstr "utopia 25"
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Restore from Hard Disk."
-msgstr "Vrati sa hard diska"
+msgid "Pipe job into a command"
+msgstr "Spoji zadatak na komandu"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Use quota for backup files."
-msgstr "Koristi quotu za backup datoteke."
+msgid "new dynamic device name generated by core kernel devfs"
+msgstr "novo dinamičko ime uređaja koje generiơe kernelov devfs"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Molim unesite maksimalnu veličinu\n"
-" dozvoljenu za Draxbackup"
+msgid "Yes"
+msgstr "Da"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the directory to save:"
-msgstr "Molimo unesite direktorij za spasiti:"
+msgid "Cote d'Ivoire"
+msgstr "Obala Slonovače"
-#: ../../standalone/drakbackup:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Use Hard Disk to backup"
-msgstr "Koristi hard disk za backup"
+msgid "Which protocol do you want to use?"
+msgstr "Koji protokol ĆŸelite koristiti?"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "please choose the date to restore"
-msgstr "molim izaberite datum za vraćanje"
+msgid "Restore Progress"
+msgstr "Napredak vraćanja"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Backup the system files before:"
-msgstr "Vrati sistemske datoteke prije:"
+msgid "Estonia"
+msgstr "Estonija"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Lista korisnika za vraćanje (samo najsvjeĆŸiji datum po korisniku je značajan)"
+msgid "Choose the host on which the local scanners should be made available:"
+msgstr "Izaberite računar kojem treba omogućiti pristup lokalnim skenerima:"
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "OK to restore the other files."
-msgstr "OK za vraćanje ostalih datoteka."
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
+msgstr ""
+"Imate rupu u vaĆĄoj tabeli particija, ali je ja ne mogu upotrijebiti.\n"
+"Jedino rjeĆĄenje je da pomjerite vaĆĄe primarne particije, kako bi se rupa "
+"naĆĄla pored extended particija"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " Restore Configuration "
-msgstr " Vrati konfiguraciju "
+msgid "Channel"
+msgstr "Kanal"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid " Successfuly Restored on %s "
-msgstr " uspjeĆĄno spaĆĄeni na %s "
+msgid "Add"
+msgstr "Dodaj"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid " All of your selected data have been "
-msgstr " Svi vaĆĄi izabrani podaci su "
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "Dijeljenje Internet konekcije nije nikad podeĆĄeno."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup files are corrupted"
-msgstr "Backup datoteke su oơtećene"
+msgid " Error while sending mail. \n"
+msgstr " GreĆĄka tokom slanja poĆĄte. \n"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Molimo isključite ili pobriơite ga idući put."
+msgid "Keyboard"
+msgstr "Tastatura"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"List of data corrupted:\n"
-"\n"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-"Lista oơtećenih podataka:\n"
-"\n"
+"Ubacite CD sa oznakom %s u CD\n"
+"jedinicu pod tačkom montiranja /mnt/cdrom"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"List of data to restore:\n"
-"\n"
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
msgstr ""
-"Lista podataka za vraćanje:\n"
-"\n"
+"Brzina bi trebala imati zavrĆĄetak k, M ili G (na primjer, \"11M\" za 11M) "
+"ili dodajte odgovarajući broj nula (0)."
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Bez podeơavanja, molim kliknite na Čarobnjak ili Napredno.\n"
+msgid "Choose the connection you want to configure"
+msgstr "Izaberite konekciju koju ĆŸelite podesiti"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "\t-Network by webdav.\n"
-msgstr "\t-MreĆŸu preko webdav-a.\n"
+msgid "Please wait, setting security level..."
+msgstr "Molim sačekajre, podeơavam nivo sigurnosti..."
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t-MreĆŸu preko rsync-a.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
+msgstr "Mandrake Linux 9.1: vrhunska razvojna platforma"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\t-MreĆŸu preko SSH.\n"
+msgid "Configuring network device %s"
+msgstr "PodeĆĄavam mreĆŸni uređaj %s"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\t-MreĆŸu preko FTPa.\n"
+msgid "activated"
+msgstr "aktiviran"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "\t-Tape \n"
-msgstr "\t-Traka \n"
+msgid "Please choose which network interface will be used for the dhcp server."
+msgstr ""
+"Molimo izaberite koji mreĆŸni interfejs ĆŸelite koristiti za spajanje na DHCP "
+"server."
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
+msgid "Finding packages to upgrade..."
+msgstr "Pronalazim pakete za unaprjeđenje..."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t-Hard disk.\n"
+msgid "Mount point: "
+msgstr "Tačka montiranja: "
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
-msgstr ""
-"\n"
-"- Demon (%s) uključuje :\n"
+msgid "parse all fonts"
+msgstr "obradi sve fontove"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tBackupi koriste tar i gzip\n"
+msgid "With X"
+msgstr "Sa X-om"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tBackupi koriste tar i bzip2\n"
+msgid "Multi-head configuration"
+msgstr "Multi-head konfiguracija"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "\tDo not include System Files\n"
-msgstr "\tNe uključuj sistemske datoteke\n"
+msgid "No browser available! Please install one"
+msgstr "Nemate nijedan browser! Molim instalirajte neki browser"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
"\n"
-"- Options:\n"
+"%s"
msgstr ""
+"ZadrĆŸati izmjene?\n"
+"Trenutna konfiguracija je:\n"
"\n"
-"- Opcije:\n"
+"%s"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t korisničko ime: %s\n"
-"\t\t u direktoriju: %s \n"
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "Ne moĆŸete koristiti ReiserFS za particije manje od 32MB"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"- Save via %s on host: %s\n"
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
-"\n"
-"- Spasi pomoću %s na računaru: %s\n"
+"Rwho protokol omogućava udaljenim korisnicima da dobiju listu svih\n"
+"korisnika prijavljenih na računar na kojem radi rwho demon (slično fingeru)."
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "\t\tErase=%s"
-msgstr "\t\tObriĆĄi=%s"
+msgid "Domain name"
+msgstr "Ime domena"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-"\n"
-"- Spasi na traku na uređaju: %s"
+msgid "Sharing of local printers"
+msgstr "Dijeljenje lokalnih ơtampača"
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
#, c-format
-msgid " (multi-session)"
-msgstr " (viĆĄe sesija)"
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgstr "http://www.mandrakelinux.com/en/91errata.php3"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on device: %s"
-msgstr "na uređaju: %s"
+msgid "Available printers"
+msgstr "Dostupni ơtampači"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "RW"
-msgstr "RW"
+msgid "Empty"
+msgstr "Prazno"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
-"- Burn to CD"
-msgstr ""
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
"\n"
-"- PrĆŸi na CD"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
"\n"
-"- ObriĆĄi tar datoteke sa diska nakon backupa.\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
"\n"
-"- spasi na hard disku u direktoriju: %s\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+"Monitor\n"
"\n"
-"- Other Files:\n"
-msgstr ""
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
"\n"
-"- ostale datoteke:\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- User Files:\n"
-msgstr ""
"\n"
-"- korisničke datoteke:\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "text width"
+msgstr "ĆĄirina teksta"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount device %s?"
+msgstr "Gdje ĆŸelite montirati uređaj %s?"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The default lease (in seconds)"
+msgstr "Podrazumjevani lease (u sekundama)"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Interface \"%s\""
+msgstr "Interfejs \"%s\""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "With basic documentation (recommended!)"
+msgstr "Sa osnovnom dokumentacijom (preporučeno)"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "1 button"
+msgstr "1 dugme"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"- System Files:\n"
+"There are %d unknown printers directly connected to your system"
msgstr ""
"\n"
-"- sistemske datoteke:\n"
+"Na vaơ sistem je spojeno %d nepoznatih ơtampača"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
+#, c-format
+msgid "Test"
+msgstr "Test"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"Backup Sources: \n"
+"Allow/Forbid direct root login."
msgstr ""
+"Arguments: (arg)\n"
"\n"
-"Izvori backup-a: \n"
+"Allow/Forbid direct root login."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select user manually"
-msgstr "Ručno izaberite korisnika"
+msgid "Korea"
+msgstr "Koreja"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Backup Users"
-msgstr "Backup korisnika"
+msgid "Your choice? (default `%s'%s) "
+msgstr "VaĆĄ izbor? (podrazumjevano '%s' %s)"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Backup system"
-msgstr "Backup sistema"
+msgid "Raw printer"
+msgstr "Sirovi ơtampač"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "Molim izaberite ĆĄta ĆŸelite backupovati"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "official vendor name of the cpu"
+msgstr "Zvanično ime proizvođača procesora"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "on Tape Device"
-msgstr "na Kasetnom uređaju"
+msgid "Vendor"
+msgstr "Proizvođač"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "on CDROM"
-msgstr "na CDROMu"
+msgid "Interface %s"
+msgstr "Interfejs %s"
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "across Network"
-msgstr "preko mreĆŸe"
+msgid "Configure mouse"
+msgstr "PodeĆĄavanje miĆĄa"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "on Hard Drive"
-msgstr "na hard disk"
+msgid "Choose the mount points"
+msgstr "Izaberite tačke montiranja"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Please choose where you want to backup"
-msgstr "Molimo izaberite gdje ĆŸelite backupovati"
+msgid "OK"
+msgstr "U redu"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "More Options"
-msgstr "ViĆĄe opcija"
+msgid "Yugoslavian (latin)"
+msgstr "Jugoslavenska (latinično)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "When"
-msgstr "Kada"
+msgid "Installing"
+msgstr "Instaliram"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Where"
-msgstr "Gdje"
+msgid "Launch userdrake"
+msgstr "Pokreni userdrake"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "What"
-msgstr "Ć ta"
+msgid "Is this an install or an upgrade?"
+msgstr "Da li je ovo instalacija ili unaprjeđenje?"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr "ObriĆĄi tar datoteke sa diska nakon backupa na drugi medij."
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "ISDN card"
+msgstr "Interna ISDN kartica"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Send mail report after each backup to:"
-msgstr "PoĆĄalji mail izvjeĆĄtaj nakon svakog backupa na :"
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
+msgstr ""
+"Podijelite vaĆĄe znanje i pomozite izgradnju Linux softvera, pridruĆŸite se "
+"diskusijskim grupama na naĆĄim \"Community\" stranicama."
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
"\n"
-"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-"Molim budite sigurni da je cron demon aktiviran u vaĆĄim servisima. \n"
+"Čestitamo, podeĆĄavanje mreĆŸe i interneta je zavrĆĄeno.\n"
"\n"
-"Obratite paĆŸnju da trenutno svi 'net' mediji takođe koriste hard disk."
+"Sada će ova konfiguracija biti primjenjena na vaơ sistem.\n"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Molim izaberite medij\n"
-"za backup."
+msgid "\t-Hard drive.\n"
+msgstr "\t-Hard disk.\n"
-#: ../../standalone/drakbackup:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Please choose the time \n"
-"interval between each backup"
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
+"\n"
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
-"Izaberite vremenski interval\n"
-"između svakog backupa"
+"Ovaj korak se aktivira samo ako je na vaơem računaru pronađena postojeća\n"
+"GNU/Linux particija.\n"
+"\n"
+"DrakX sada treba znati da li ĆŸelite izvrĆĄiti novu instalaciju ili "
+"nadogradnju postojećeg\n"
+"Mandrake Linux sistema:\n"
+"\n"
+" * \"Instaliraj\": Najčeơće ovo će u potpunosti obrisati stari sistem. Ako "
+"ĆŸelite\n"
+"promijeniti particioniranje starog hard diska ili promijeniti datotečni "
+"sistem,\n"
+"trebate koristiti ovu opciju. Ali, ovisno o vaĆĄoj ĆĄemi particioniranja, "
+"moĆŸete\n"
+"spriječiti da neki od vaơih postojećih podataka budu prepisani.\n"
+"\n"
+" * \"Nadogradi\": Ova vrsta instalacije vam omogućuje da updatujete pakete\n"
+"koji su trenutno instalirani na vaĆĄem Mandrake Linux sistemu. VaĆĄa trenutna\n"
+"ơema particioniranja i korisnički podaci neće biti izmijenjeni. Većina "
+"ostalih koraka\n"
+"konfiguracije ostaju kao ơto jesu, slično običnoj instalaciji.\n"
+"\n"
+"Opcija ''Nadogradi'' bi trebala raditi ispravno na Mandrake Linux sistemima "
+"koji\n"
+"koriste verziju \"8.1\" ili kasniju. Obavljanje nadogradnje na ranijim "
+"verzijama\n"
+"Mandrake Linuxa, prije verzije \"8.1\", nije preporučeno."
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Use daemon"
-msgstr "Koristi demon"
+msgid "Printer on remote CUPS server"
+msgstr "Ơtampač na udaljenom CUPS serveru"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "monthly"
-msgstr "mjesečno"
+msgid ""
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgstr "Nisam uspio ukloniti ơtampač \"%s\" iz Star/Open Offica."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "weekly"
-msgstr "sedmično"
+msgid "delete"
+msgstr "obriĆĄi"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "daily"
-msgstr "dnevno"
+msgid "here if no."
+msgstr "ovdje ako ne."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "hourly"
-msgstr "svakog sata"
+msgid "DHCP host name"
+msgstr "DHCP ime računara"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "HardDrive / NFS"
-msgstr "HardDrive / NFS"
+msgid "The maximum lease (in seconds)"
+msgstr "Maksimalni lease (u sekundama)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "Molimo izaberite na kojem serijskom portu je spojen vaĆĄ miĆĄ."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please enter the directory to save to:"
-msgstr "Molimo unesite direktorij u koji ĆŸelite spasiti:"
+msgid "Did it work properly?"
+msgstr "Da li je radilo ispravno?"
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr "Molim uključite ako ĆŸelite izbaciti traku nakon backupa."
+msgid "Poor"
+msgstr "LoĆĄ"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr "Molim uključite ako ĆŸelite obrisati traku prije backupa."
+msgid "The DHCP start range"
+msgstr "Početak DHCP raspona"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "Molim uključite ako ĆŸelite koristiti non-rewinding uređaj."
+msgid "Grenada"
+msgstr "Grenada"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Please enter the device name to use for backup"
-msgstr "Molim unesite ime uređaja kojeg ćete koristiti za backup"
+msgid "Unsafe"
+msgstr "Nesigurno"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Use tape to backup"
-msgstr "Koristi traku za backup"
+msgid ", %s sectors"
+msgstr ", %s sektora"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "No CD device defined!"
-msgstr "Nije definisan CD uređaj!"
+msgid "No"
+msgstr "Ne"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
msgstr ""
-"Molim unesite naziv uređaja vaơeg CD Writera\n"
-" npr: 0,1,0"
+"Da li je vaơ ơtampač multifunkcijski uređaj od HPa ili Sony-ja (OfficeJet, "
+"PSC, LaserJet 1100/1200/1220/3200/3300 sa skenerom, Sony IJP-V100), ili HP "
+"PhotoSmart ili HP LaserJet 2200?"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "Molim uključite ako koristite DVDRAM uređaj"
+msgid "Guadeloupe"
+msgstr "Gvadalupe"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "Molim uključite ako koristite DVDR uređaj"
+msgid "could not find any font.\n"
+msgstr "ne mogu naći nijedan font.\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid " Erase Now "
-msgstr " ObriĆĄi odmah "
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "Ćœelite li da BackSpace vrati Delete u konzoli?"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "Molim uključite ako ĆŸelite obrisati vaĆĄ RW medij (prva sesija)"
+msgid "Vertical refresh rate"
+msgstr "Brzina vertikalnog osvjeĆŸavanja"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
#, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "Molim uključite ako koristite CDRW medij"
+msgid "Entering step `%s'\n"
+msgstr "Prelazim na korak `%s'\n"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please check for multisession CD"
-msgstr "Molim uključite ako koristite multisesijski CD"
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "Molimo izaberite veličinu vaơeg CD/DVD medija (Mb)"
+msgid "Removing %s ..."
+msgstr "Uklanjam %s..."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
-msgstr ""
-"Molim izaberite vaơ CD/DVD uređaj\n"
-"(Pritisnite Enter za propagaciju postavki na ostala polja. \n"
-"Ovo polje nije obavezno, ono je samo alat za popunjavanje formulara.)"
+msgid "Niger"
+msgstr "Niger"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use CD/DVDROM to backup"
-msgstr "Koristi CD/DVDROM za backup"
+msgid "No printer"
+msgstr "Nema ơtampača"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Need hostname, username and password!"
-msgstr "Potrebno ime računara, korisničko ime i ơifra!"
+msgid "alert configuration"
+msgstr "postavka upozorenja"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remember this password"
-msgstr "Zapamti ovu ĆĄifru"
+msgid "NetWare Printer Options"
+msgstr "Opcije NetWare ơtampača"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Please enter your password"
-msgstr "Molimo unesite vaĆĄu ĆĄifru"
+msgid "%s BootSplash (%s) preview"
+msgstr "%s BootSplash (%s) pregled"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Please enter your login"
-msgstr "Molimo unesite vaĆĄ login"
+msgid "General"
+msgstr "Općenito"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
-msgstr ""
-"Molimo unesite direktorij (ili modul) za\n"
-" smjeơtaj backupa na ovom računaru."
+msgid "Printing system: "
+msgstr "Sistem ĆĄtampe: "
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please enter the host name or IP."
-msgstr "Molimo unesite ime računara ili IP."
+msgid "Add a user"
+msgstr "Dodajte korisnika"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
-msgstr ""
-"Drugi (ne drakbackup)\n"
-"ključevi su već na mjestu"
+msgid "Network configuration (%d adapters)"
+msgstr "PodeĆĄavanje mreĆŸe (%d adaptera)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#, c-format
+msgid "Mandatory package %s is missing"
+msgstr "Nedostaje obavezan paket %s"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Philippines"
+msgstr "Filipini"
+
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#, c-format
+msgid "Ok"
+msgstr "Ok"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Print Queue Name"
+msgstr "Naziv reda za ĆĄtampu"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "Da li ĆŸelite koristiti aboot?"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "Bjeloruska"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-" Transfer \n"
-"Now"
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
msgstr ""
-" Prebaci \n"
-"odmah"
+"PDQ podrĆŸava samo lokalne ĆĄtampače, udaljene LPD ĆĄtampačei Socket/TCP "
+"ơtampače.\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Move files to the new partition"
+msgstr "Prebaci datoteke na novu particiju"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
msgstr ""
-"Napravi/premjesti\n"
-"backup ključeve za SSH"
+"Ovdje dodajte CUPS servere čije ĆĄtampače ĆŸelite koristiti. Ovo trebate "
+"raditi samo ako serveri ne broadcast-uju informacije o njihovim ơtampačima "
+"cijeloj lokalnoj mreĆŸi."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use Expect for SSH"
-msgstr "Koristi Expect za SSH"
+msgid "Restore From Catalog"
+msgstr "Vrati iz kataloga"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Net Method:"
-msgstr "Net Method:"
+msgid "Pitcairn"
+msgstr "Pitcairn"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use network connection to backup"
-msgstr "Koristi mreĆŸnu konekciju za backup"
+msgid "IDE"
+msgstr "IDE"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Users"
-msgstr "Korisnici"
+msgid "group :"
+msgstr "grupa :"
-#: ../../standalone/drakbackup:1
+#: ../../fs.pm:1
#, c-format
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
+msgid "mounting partition %s in directory %s failed"
+msgstr "montiranje particije %s u direktoriju %s nije uspjelo"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr "Koristi inkrementalni backup (nemoj prebrisati stare backupe)"
+msgid "Lilo screen"
+msgstr "Lilo ekran"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid "Remove Selected"
-msgstr "Ukloni izabrano"
+msgid "LILO with graphical menu"
+msgstr "LILO sa grafičkim menijem"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Do not include the browser cache"
-msgstr "Ne uključuj spremnik web preglednika"
+msgid "Estimating"
+msgstr "Procjenjujem"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "Molimo izaberite sve korisnike koje ĆŸelite uključiti u vaĆĄ backup."
+msgid "You can't unselect this package. It is already installed"
+msgstr "Ne moĆŸete isključiti ovaj paket. On je već instaliran"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Sa ovom opcijom bićete u mogućnosti da vratite bilo koju\n"
-" verziju vaĆĄeg /etc direktorija."
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr ", ơtampač \"%s\" na SMB/Windows serveru \"%s\""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Zaobiđi kritične datoteke (passwd, group, fstab)"
+msgid "Go on anyway?"
+msgstr "Svejedno nastavi?"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use incremental backup (do not replace old backups)"
-msgstr "Koristi inkrementalni backup (nemoj prebrisati stare backupe)"
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "TraĆŸim dostupne pakete i izgrađujem rpm bazu podataka..."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Backup sistemskih datoteka. (/etc direktorij)"
+msgid "Does not appear to be recordable media!"
+msgstr "Izgleda da na ovaj medij nije moguće snimati!"
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Ove opcije mogu spasiti ili vratiti sve datoteke u vaĆĄem /etc direktoriju.\n"
+msgid "Specify options"
+msgstr "Navedi opcije"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Vanuatu"
+msgstr "Vanuatu"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Either the server name or the server's IP must be given!"
+msgstr "Treba biti dato ili ime servera ili IP adresa servera!"
+
+#: ../../any.pm:1
#, c-format
msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
"\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
msgstr ""
+"Vlastita boot disketa vam omogućuje da pokrenete Linux pri čemu ne ovisite\n"
+"od bootloader programa. Ovo je korisno ako ne ĆŸelite instalirati SILO na\n"
+"vaĆĄ sistem, ako neki drugi operativni sistem uklanja SILO ili ako SILO ne "
+"radi\n"
+"na vaĆĄoj trenutnoj konfiguraciji. Vlastiti bootdisk se moĆŸe takođe koristiti "
+"sa\n"
+"Mandrake rescue image, pri čemu je mnogo lakơe ispraviti neke ozbiljne\n"
+"sistemske kvarove.\n"
"\n"
-"Molimo uključite sve potrebne opcije.\n"
+"Ako ĆŸelite napraviti boot disketu za vaĆĄ sistem, stavite neku disketu u "
+"vaĆĄu\n"
+"prvu jedinicu i pritisnite \"U redu\"."
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Izaberite datoteke ili direktorije i kliknite na 'Dodaj'"
+msgid "You can't use an encrypted file system for mount point %s"
+msgstr "Ne moĆŸete koristiti ĆĄifrovani datotečni sistem za tačku montiranja %s"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "File Selection"
-msgstr "Izbor datoteka"
+msgid "Norfolk Island"
+msgstr "Norfolk ostrvo"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Can't create catalog!"
-msgstr "Ne mogu napraviti katalog!"
+msgid "Theme installation failed!"
+msgstr "Instalacija teme nije uspjela!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid " Error while sending mail. \n"
-msgstr " GreĆĄka tokom slanja poĆĄte. \n"
+msgid "Nothing to do"
+msgstr "Nemam ĆĄta da radim"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
-"\n"
-"Drakbackup aktivnosti putem trake:\n"
-"\n"
+msgid "Use for loopback"
+msgstr "Koristi za loopback"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
-"\n"
-"Drakbackup aktivnosti putem CDa:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
+msgstr "Mandrake alat za prijavu bugova"
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
-"\n"
-"Drakbackup aktivnosti putem %s:\n"
-"\n"
+msgid "use pppoe"
+msgstr "koristi pppoe"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving files to the new partition"
+msgstr "PremjeĆĄtam datoteke na novu particiju"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s sa EKSPERIMENTALNIM 3D hardverskim ubrzanjem"
+
+#: ../../help.pm:1 ../../interactive.pm:1
+#, c-format
+msgid "Advanced"
+msgstr "Napredno"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transfer"
+msgstr "Prebaci"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak (Ć vedska)"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-" Problem sa FTP konekcijom: Nije bilo moguće poslati vaơe backup datoteke "
-"putem FTPa.\n"
+msgid "More Options"
+msgstr "ViĆĄe opcija"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Afghanistan"
+msgstr "Afganistan"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Delete Hard Drive tar files after backup to other media."
+msgstr "ObriĆĄi tar datoteke sa diska nakon backupa na drugi medij."
+
+#: ../../services.pm:1
+#, c-format
msgid ""
-"file list sent by FTP: %s\n"
-" "
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
msgstr ""
-"lista datoteka poslana putem FTPa: %s\n"
-" "
+"Cron je standardan UNIX program koji periodično pokreće programe koje\n"
+"zada korisnik. Vixie cron dodaje veći broj mogućnosti osnovnom\n"
+"UNIX cronu, uključujući bolju sigurnost i moćnije opcije za podeơavanje."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "No changes to backup!"
-msgstr "Nema izmjena na backupu!"
+msgid "Burundi"
+msgstr "Burundi"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Datoteke backup-a hard diska..."
+msgid "Add Client -->"
+msgstr "Dodaj klijenta -->"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Backup Other files..."
-msgstr "Backup-uj ostale datoteke..."
+msgid "Read carefully!"
+msgstr "Pročitajte paĆŸljivo!"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "Napredak backup-a hard diska..."
+msgid "RW"
+msgstr "RW"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Backup User files..."
-msgstr "Backup-uj korisničke datoteke..."
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
+msgstr ""
+"Molim,\n"
+"unesite vaĆĄ tv standard i drĆŸavu"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Backup system files..."
-msgstr "Backup-uj sistemske datoteke..."
+msgid "Port"
+msgstr "Port"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "No tape in %s!"
-msgstr "Nema trake u %s!"
+msgid "No (experts only)"
+msgstr "Ne (samo eksperti)"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Permission problem accessing CD."
-msgstr "Problem sa privilegijama tokom pristupa na CD."
+msgid "No kernel selected!"
+msgstr "Nije izabran kernel!"
-#: ../../standalone/drakbackup:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "This may take a moment to erase the media."
-msgstr "Potrebno je par trenutaka da se obriĆĄe medij."
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Pritisnite enter za bootanje izabranog OSa, 'e' za editovanje"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Not erasable media!"
-msgstr "Medij nije izbrisiv!"
+msgid "Set-GID"
+msgstr "Set-GID"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr "Izgleda da na ovaj medij nije moguće snimati!"
+msgid "The encryption keys do not match"
+msgstr "Ključevi enkripcije se ne poklapaju"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No CDR/DVDR in drive!"
-msgstr "Nema CDR/DVDR u drajvu!"
+msgid "Right \"Windows\" key"
+msgstr "Desna \"Windows\" tipka"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "WebDAV transfer failed!"
-msgstr "WebDAV transfer nije uspio!"
+msgid "CDROM / DVDROM"
+msgstr "CDROM / DVDROM"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "WebDAV remote site already in sync!"
-msgstr "Udaljeni WebDAV sajt je već sinhroniziran!"
+msgid "if set to yes, check empty password in /etc/shadow."
+msgstr "ako je postavljeno na da, provjerava prazne ĆĄifre u /etc/shadow."
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Total progess"
-msgstr "Ukupno napredak"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
+msgstr ""
+"Prije nego ĆĄto nastavimo, trebate paĆŸljivo pročitati uvjete licence. Ona\n"
+"pokriva cijelu Mandrake Linux distribuciju. Ako se slaĆŸete sa svim\n"
+"uvjetima u njoj, kliknite na dugme \"Prihvati\". Ako ne, samo ugasite\n"
+"vaơ računar."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
+"Here is a list of the available printing options for the current printer:\n"
"\n"
-"without being prompted for a password."
msgstr ""
-"Transfer uspjeĆĄan\n"
-"MoĆŸda je potrebno da provjerite da li se moĆŸete prijaviti na server sa:\n"
+"Ovo je lista mogućih opcija za ơtampu za trenutni ơtampač:\n"
"\n"
-"ssh -i %s %s\\@%s\n"
+
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolutions"
+msgstr "Rezolucije"
+
+#: ../../network/drakfirewall.pm:1
+#, c-format
+msgid ""
+"drakfirewall configurator\n"
"\n"
-"bez pitanja o ĆĄifri."
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
+msgstr ""
+"drakfirewall podeơavač\n"
+"\n"
+"On podeơava lični firewall za ovaj Mandrake Linux računar.\n"
+"Za moćnu soluciju posebnog firewalla, molimo pogledajte\n"
+"specijaliziranu MandrakeSecurity Firewall distribuciju."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "%s not responding"
-msgstr "%s ne odgovara"
+msgid ""
+"Please enter your username, password and domain name to access this host."
+msgstr ""
+"Molim unesite vaơe korisničko ime, ơifru i domen da biste pristupili ovom "
+"računaru."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Can't find %s on %s"
-msgstr "Ne mogu pronaći %s na %s"
+msgid "Remove selected host"
+msgstr "Ukloni izabrani računar"
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr "Pristup odbijen pri prenosu %s na %s"
+msgid "Network configuration"
+msgstr "PodeĆĄavanje mreĆŸe"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Bad password on %s"
-msgstr "PogreĆĄna ĆĄifra na %s"
+msgid "No sharing"
+msgstr "Bez dijeljenja"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr "Nema upita za ĆĄifru na %s na portu %s"
+msgid "Move selected rule down one level"
+msgstr "Pomjeri izabrano pravilo dole za jedan nivo"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "ERROR: Cannot spawn %s."
-msgstr "GREĆ KA: Ne mogu pokrenuti %s."
+msgid "TB"
+msgstr "TB"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr "MoĆŸda će trebati par trenutaka da se generiĆĄu ključevi."
+msgid "Please check if you are using a DVDR device"
+msgstr "Molim uključite ako koristite DVDR uređaj"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
-"%s već postoji, da ga obriơem?\n"
-"\n"
-"Upozorenje: Ako ste već jednom obavili ovaj proces, vjerovatno\n"
-"trebate očistiti unos iz liste autoriziranih ključeva na serveru."
+msgid "FATAL"
+msgstr "FATALNO"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
"\n"
-" DrakBackup Report Details\n"
-"\n"
+"The network address is %s using a netmask of %s.\n"
"\n"
msgstr ""
+"DHCP server omogućuje pokretanje drugih računara koristeći PXE u zadatom "
+"rasponu adresa.\n"
"\n"
-" DrakBackup Detalji izvjeĆĄtaja\n"
-"\n"
+"MreĆŸna adresa je %s koristeći netmasku %s.\n"
"\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Delete"
+msgstr "ObriĆĄi"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"Allow/Forbid reboot by the console user."
msgstr ""
+"Arguments: (arg)\n"
"\n"
-" DrakBackup IzvjeĆĄtaj o demonima\n"
-"\n"
-"\n"
+"Allow/Forbid reboot by the console user."
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
msgstr ""
-"\n"
-" DrakBackup IzvjeĆĄtaj \n"
-"\n"
+"Mogu podesiti vaơ računar da automatski pokrene grafički interfejs (XFree) "
+"pri pokretanju računara.\n"
+"Ćœelite li da se XFree automatski pokreće?"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "INFO"
-msgstr "INFO"
+msgid "Build the disk"
+msgstr "Napravi disk"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "FATAL"
-msgstr "FATALNO"
+msgid "Disconnect %s"
+msgstr "Prekini konekciju na %s"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "WARNING"
-msgstr "UPOZORENJE"
+msgid "Status:"
+msgstr "Status:"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Cron not available yet as non-root"
-msgstr "Kron joĆĄ uvijek nije dostupan kao ne-root"
+msgid "HTTP proxy"
+msgstr "HTTP proxy"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Instalacija %sa nije uspjela. Javila se sljedeća greơka:"
+msgid "SSH Server"
+msgstr "SSH server"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No, I don't want autologin"
-msgstr "Ne, ne ĆŸelim da se autologiram"
+msgid "\t-Network by rsync.\n"
+msgstr "\t-MreĆŸu preko rsync-a.\n"
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Da, ĆŸelim da se autologiram sa ovim (korisnik, desktop)"
+msgid "European protocol"
+msgstr "Evropski protokol"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "Pokreni X-Window sistem na startu"
+msgid ", printer \"%s\" on server \"%s\""
+msgstr ", ơtampač \"%s\" na serveru \"%s\""
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
#, c-format
-msgid "System mode"
-msgstr "Sistem mod"
+msgid "Error"
+msgstr "GreĆĄka"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Bootsplash"
-msgstr "Boot ekran"
+msgid "allow \"su\""
+msgstr "dozvoli \"su\""
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Lilo screen"
-msgstr "Lilo ekran"
+msgid "Australia"
+msgstr "Australija"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
-"\n"
-"Izaberite temu za\n"
-"lilo i boot ekran,\n"
-"moĆŸete ih odvojeno\n"
-"izabrati"
+msgid "please wait during ttmkfdir..."
+msgstr "molimo sačekajte tokom ttmkfdir..."
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Themes"
-msgstr "Teme"
+msgid "Configure only card \"%s\"%s"
+msgstr "Podesi samo karticu \"%s\"%s"
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Splash selection"
-msgstr "Izbor splash-a"
+msgid "Level"
+msgstr "Nivo"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Trenutno koristite %s kao boot manager.\n"
-"Kliknite na Konfiguriơi kako bi se pokrenuo čarobnjak za podeơavanje."
+msgid "Change the printing system"
+msgstr "Promijenite sistem ĆĄtampe"
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr "UspjeĆĄna instalacija LiLo i Boot tema"
+msgid ""
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
+msgstr ""
+"VaĆĄ sistem podrĆŸava konfiguraciju viĆĄe glava.\n"
+"Ć ta ĆŸelite učiniti?"
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
#, c-format
-msgid "Theme installation failed!"
-msgstr "Instalacija teme nije uspjela!"
+msgid "Configure services"
+msgstr "PodeĆĄavanje servisa"
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Notice"
-msgstr "Napomena"
+msgid "Broadcast Address:"
+msgstr "Broadcast adresa:"
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Relaunch 'lilo'"
-msgstr "Pokrećem 'lilo'"
+msgid "mount failed: "
+msgstr "montiranje nije uspjelo: "
-#: ../../standalone/drakboot:1
-#, c-format
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
msgstr ""
-"Ne mogu pokrenuti LiLo!\n"
-"IzvrĆĄite \"lilo\" kao root u komandnoj liniji da dovrĆĄite instalaciju LiLo "
-"teme."
+"Linux kernel mora izvrơiti proračunsku petlju prilikom boot-a kako bi "
+"inicijalizirao tajmer. Rezultat rada te petlje se prikazuje u vidu "
+"bogomipsa, kao jedan neprecizan pokazatelj brzine CPUa."
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
-msgstr "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+msgid "Image"
+msgstr "Image"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr "Ne mogu izvrĆĄiti mkinitrd -f /boot/initrd-%s.img %s."
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
+msgstr "Nisam uspio dodati ơtampač \"%s\" u Star Office/OpenOffice.org/GIMP."
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
+#, c-format
+msgid "Remote Administration"
+msgstr "Udaljena administracija"
+
+#: ../../modules.pm:1
#, c-format
msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
msgstr ""
-"Ne mogu pisati u /etc/sysconfig/bootsplash\n"
-"Datoteka nije pronađena."
+"PCMCIA podrĆĄka za 2.2 kernele viĆĄe ne postoji. Molim koristite 2.4 kernel."
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Write %s"
-msgstr "ZapiĆĄi %s"
+msgid "Selected All"
+msgstr "Sve izabrano"
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr "Ne mogu pisati u /etc/sysconfig/bootsplash."
+msgid "CUPS - Common Unix Printing System"
+msgstr "CUPS - Common Unix Printing System"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Lilo message not found"
-msgstr "Nisam pronaĆĄao Lilo poruku."
+msgid "Webmin Service"
+msgstr "Webmin servis"
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Copy %s to %s"
-msgstr "Kopiraj %s u %s"
+msgid "device"
+msgstr "uređaj"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Backup %s to %s.old"
-msgstr "Backupujem %s u %s.old"
+msgid "All"
+msgstr "Svi"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create new theme"
-msgstr "Napravi novu temu"
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "Koji sistem ĆĄtampanja (spooler) ĆŸelite koristiti?"
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"Tema prikaza\n"
-"pod konzolom"
+msgid "Greece"
+msgstr "Grčka"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Install themes"
-msgstr "Instaliraj teme"
+msgid "An error occurred"
+msgstr "DoĆĄlo je do greĆĄke"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub mod"
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
+msgstr ""
+"Ovaj paket mora biti unaprijeđen\n"
+"Jeste li sigurni da ga ĆŸelite isključiti?"
-#: ../../standalone/drakboot:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Yaboot mode"
-msgstr "Yaboot mod"
+msgid "Tamil (Typewriter-layout)"
+msgstr "Tamilska (pisaća maơina)"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
+msgid "manual"
+msgstr "ručno"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/File/_Quit"
-msgstr "/Datoteka/_Izlaz"
+msgid "Printer manufacturer, model, driver"
+msgstr "Proizvođač ơtampača, model, drajver"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "/_File"
-msgstr "/_Datoteka"
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"Nema medija ili je zabranjeno pisanje na medij za uređaj %s.\n"
+"Molim ubacite neki medij."
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Style Configuration"
-msgstr "Konfiguracija stila boota"
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
+msgstr ""
+"Direktorij %s već sadrĆŸi neke podatke\n"
+"(%s)"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "No browser available! Please install one"
-msgstr "Nemate nijedan browser! Molim instalirajte neki browser"
+msgid "Printer on NetWare server"
+msgstr "Ơtampač na NetWare serveru"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "connecting to Bugzilla wizard ..."
-msgstr "spajam se na Bugzilla čarobnjak..."
+msgid "Give the ram size in MB"
+msgstr "Navedite veličinu rama u MB"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Package not installed"
-msgstr "Paket nije instaliran"
+msgid "Real name"
+msgstr "Pravo ime"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Not installed"
-msgstr "Nije instaliran"
+msgid "done"
+msgstr "gotovo"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Standalone Tools"
-msgstr "Samostalni alati"
+msgid "Please uncheck or remove it on next time."
+msgstr "Molimo isključite ili pobriơite ga idući put."
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Report"
-msgstr "IzvjeĆĄtaj"
+msgid "Higher"
+msgstr "ViĆĄi"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the partitions you want to format"
+msgstr "Izaberite particije koje ĆŸelite formatirati"
+
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
+"\n"
"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
+"Na vaơem računaru nije detektovana TV kartica. Molim provjerite da li je "
+"ispravno priključena Video/TV kartica koja je podrĆŸana pod Linuxom.\n"
"\n"
"\n"
-"Da prijavite bug, kliknite na dugme Prijavi.\n"
-"Ovo će otvoriti prozor web browsera na https://drakbug.mandrakesoft.com\n"
-" gdje ćete pronaći formular koji treba popuniti. Gore prikazane informacije "
-"će biti \n"
-"poslane na taj server\n"
+"MoĆŸete posjetiti naĆĄu bazu hardvera na:\n"
+"\n"
"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Release: "
-msgstr "Izdanje:"
+msgid "Can't find %s on %s"
+msgstr "Ne mogu pronaći %s na %s"
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Kernel:"
-msgstr "Kernel:"
+msgid "Japanese 106 keys"
+msgstr "Japanska 106 tipki"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Package: "
-msgstr "Paket:"
+msgid "This will take a few minutes."
+msgstr "Ovo će potrajati par minuta."
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Application:"
-msgstr "Aplikacija:"
+msgid "Burkina Faso"
+msgstr "Burkina Faso"
-#: ../../standalone/drakbug:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Configuration Wizards"
-msgstr "Čarobnjaci za podeơavanje"
+msgid "Use scanners on remote computers"
+msgstr "Koristi skenere na udaljenim računarima"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
+msgid "Delete selected rule"
+msgstr "ObriĆĄi izabrano pravilo"
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Windows Migration tool"
-msgstr "Alat za Windows migraciju"
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Pristupam ơtampačima na udaljenim CUPS serverima"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
+msgid "Insert a floppy in %s"
+msgstr "Ubacite disketu u %s"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Software Manager"
-msgstr "Upravljanje programima"
+msgid "Maldives"
+msgstr "Maldivi"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Remote Control"
-msgstr "Udaljena kontrola"
+msgid "compact"
+msgstr "kompaktno"
-#: ../../standalone/drakbug:1
+#: ../../common.pm:1
#, c-format
-msgid "Msec"
-msgstr "Msec"
+msgid "1 minute"
+msgstr "1 minuta"
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
+msgid "on channel %d id %d\n"
+msgstr "na kanalu %d id %d\n"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Mandrake Online"
-msgstr "Mandrake Online"
+msgid ", multi-function device"
+msgstr ", viơenamjenski uređaj"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
+msgid "Laos"
+msgstr "Laos"
-#: ../../standalone/drakbug:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Synchronization tool"
-msgstr "Alat za sinhroniziranje"
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr ""
+"Ne postoji nijedna FAT particija za promjenu veličine (ili nije ostalo "
+"dovoljno prostora)"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "First Time Wizard"
-msgstr "Čarobnjak za prvo pokretanje"
+msgid "Up"
+msgstr "Gore"
-#: ../../standalone/drakbug:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mandrake Control Center"
-msgstr "Mandrake Kontrolni centar"
+msgid "Firewall"
+msgstr "Firewall"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Mandrake Bug Report Tool"
-msgstr "Mandrake alat za prijavu bugova"
+msgid "Area:"
+msgstr "Oblast :"
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Parameters"
-msgstr "Parametri"
+msgid "(E)IDE/ATA controllers"
+msgstr "(E)IDE/ATA kontroleri"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Configuration"
-msgstr "PodeĆĄavanje Internet konekcije"
+msgid "Printer Server"
+msgstr "Printer Server"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "DHCP Client"
-msgstr "DHCP klijent"
+msgid "Disconnection from the Internet complete."
+msgstr "Prekid veze sa Internetom zavrĆĄen."
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ethernet Card"
-msgstr "Ethernet kartica"
+msgid "Custom configuration"
+msgstr "Vlastita konfiguracija"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Gateway"
-msgstr "Gateway"
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
+"Molim navedite gdje se nalazi instalaciona slika.\n"
+"\n"
+"Ako nemate postojeći direktorij, molim kopirajte sadrĆŸaj CDa ili DVDa.\n"
+"\n"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connection type: "
-msgstr "Tip konekcije: "
+msgid "Saint Pierre and Miquelon"
+msgstr "Saint Pierre and Miquelon"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Profile: "
-msgstr "Profil:"
+msgid ""
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
+msgstr ""
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Internet connection configuration"
-msgstr "PodeĆĄavanje Internet konekcije"
+msgid "saving Bootsplash theme..."
+msgstr "snimam Bootsplash temu..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Nemate nijednu Internet konekciju.\n"
-"Napravite jednu klikajući na 'Podesi'"
+msgid "Portugal"
+msgstr "Portugal"
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Interfejs joĆĄ nije podeĆĄen.\n"
-"Pokrenite čarobnjak za podeơavanje u glavnom prozoru"
+msgid "Do you have another one?"
+msgstr "Imate li neki drugi?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "activate now"
-msgstr "pokreni sada"
+msgid ", printing to %s"
+msgstr ", ĆĄtampa u %s"
-#: ../../standalone/drakconnect:1
+#: ../../network/network.pm:1
#, c-format
-msgid "deactivate now"
-msgstr "zaustavi sada"
+msgid "Assign host name from DHCP address"
+msgstr "Odredi ime računara iz DHCP adrese"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DHCP client"
-msgstr "DHCP klijent"
+msgid "Toggle to normal mode"
+msgstr "Prebaci u normalni mod"
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Started on boot"
-msgstr "Pokrenut na bootu"
+msgid "Generic"
+msgstr "OpĆĄti"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Protocol"
-msgstr "Boot protokol"
+msgid "Cylinder %d to %d\n"
+msgstr "Cilindar %d do %d\n"
#: ../../standalone/drakconnect:1
#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
+msgid "New profile..."
+msgstr "Novi profil..."
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LAN Configuration"
-msgstr "PodeĆĄavanje LANa"
+msgid "Which disk do you want to move it to?"
+msgstr "Na koji disk je ĆŸelite premjestiti?"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "LAN configuration"
-msgstr "PodeĆĄavanje LANa"
+msgid "Display logo on Console"
+msgstr "PrikaĆŸi logo na konzoli"
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Nemate nijedan podeĆĄen interfejs.\n"
-"Podesite ih prvo klikajući na 'Podesi'"
+msgid "Windows Domain"
+msgstr "Windows domena"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Connect..."
-msgstr "Konektuj se..."
+msgid "Interface %s (on network %s)"
+msgstr "Interfejs %s (na mreĆŸi %s)"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Disconnect..."
-msgstr "Prekini konekciju..."
+msgid "INFO"
+msgstr "INFO"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not connected"
-msgstr "Nije konektovan"
+msgid "Wallis and Futuna"
+msgstr "Wallis i Futuna"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Connected"
-msgstr "Konektovan"
+msgid "Need to create /etc/dhcpd.conf first!"
+msgstr "Najprije treba napraviti /etc/dhcpd.conf !"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Is FPU present"
+msgstr "Da li postoji FPU"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "There are no scanners found which are available on your system.\n"
+msgstr "Nisam pronaĆĄao nijedan skener na vaĆĄem sistemu.\n"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
+"No additional information\n"
+"about this service, sorry."
msgstr ""
-"Upozorenje, otkrivena je druga Internet konekcija, moĆŸda preko vaĆĄe mreĆŸe"
+"Nema dodatnih informacija\n"
+"o ovom servisu, ĆŸalim."
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Interface:"
-msgstr "Interfejs:"
+msgid "Build Single NIC -->"
+msgstr "Izgradi jedan NIC -->"
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Gateway:"
-msgstr "Gateway:"
+msgid "Is this correct?"
+msgstr "Da li je ovo ispravno?"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Apply"
-msgstr "Primjeni"
+msgid "Marshall Islands"
+msgstr "MarĆĄalova ostrva"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Click here to launch the wizard ->"
-msgstr "Kliknite ovdje za pokretanje čarobnjaka ->"
+msgid "Windows (FAT32)"
+msgstr "Windows (FAT32)"
-#: ../../standalone/drakconnect:1
+#: ../../steps.pm:1
#, c-format
-msgid "Wizard..."
-msgstr "Čarobnjak..."
+msgid "Root password"
+msgstr "Root ĆĄifra"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Status:"
-msgstr "Status:"
+msgid "Build All Kernels -->"
+msgstr "Izgradi sve kernele -->"
-#: ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Type:"
-msgstr "Tip:"
+msgid "if set to yes, report unowned files."
+msgstr "ako je postavljeno na da, prijavljuje datoteke bez vlasnika."
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Internet access"
-msgstr "Pristup Internetu"
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"Nemate nijednu swap particiju\n"
+"\n"
+"Svejedno nastavi?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hostname: "
-msgstr "Hostname: "
+msgid "Server IP missing!"
+msgstr "Nedostaje IP adresa servera!"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Podesi Lokalnu mreĆŸu..."
+msgid "Suriname"
+msgstr "Surinam"
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "State"
-msgstr "Status"
+msgid "Enable ACPI"
+msgstr "Uključi ACPI"
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "Driver"
-msgstr "Drajver"
+msgid "Graphical Environment"
+msgstr "Grafičko okruĆŸenje"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Protocol"
-msgstr "Protokol"
+msgid "Gibraltar"
+msgstr "Gibraltar"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Interface"
-msgstr "Interfejs"
+msgid "on Tape Device"
+msgstr "na Kasetnom uređaju"
-#: ../../standalone/drakconnect:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Configure Internet Access..."
-msgstr "Podesi Internet pristup..."
+msgid "Do nothing"
+msgstr "Nemoj raditi niĆĄta"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Wait please"
-msgstr "Molim sačekajte"
+msgid "Delete Client"
+msgstr "ObriĆĄi klijent"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Naziv profila koji će biti kreiran (novi profil je kreiran kao kopija "
-"postojećeg) :"
+msgid "Filesystem type: "
+msgstr "Tip datotečnog sistema: "
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New profile..."
-msgstr "Novi profil..."
+msgid "Starting network..."
+msgstr "Pokrećem mreĆŸu..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Profile to delete:"
-msgstr "Profil za brisanje:"
+msgid "Vietnam"
+msgstr "Vijetnam"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Del profile..."
-msgstr "BriĆĄi profil..."
+msgid "/_Fields description"
+msgstr "/_Opis polja"
-#: ../../standalone/drakconnect:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "PodeĆĄavanje mreĆŸe (%d adaptera)"
+msgid "Optimize your security by using Mandrake Linux"
+msgstr "Optimizirajte vaơu sigurnost koristeći Mandrake Linux"
-#: ../../standalone/drakedm:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
-"X11 Display Manager vam omogućuje da se grafički\n"
-"prijavite na vaĆĄ sistem uz pokretanje X Window Systema, a podrĆŸava i\n"
-"nekoliko različitih X sesija na vaơem lokalnom računaru u isto vrijeme."
+msgid "Help"
+msgstr "Pomoć"
-#: ../../standalone/drakedm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Choosing a display manager"
-msgstr "Izbor display managera"
+msgid "Your personal phone number"
+msgstr "Vaơ lični broj telefona"
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Which size do you want to keep for Windows on"
+msgstr "Koju veličinu ĆŸelite da sačuvate za Windows na"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
msgstr ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
+"Testna stranica je poslana ơtampaču.\n"
+"MoĆŸe potrajati određeno vrijeme dok ĆĄtampač krene.\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unable to fork: %s"
-msgstr "Ne mogu izvrsiti fork: %s"
+msgid "Username required"
+msgstr "Potrebno korisničko ime"
-#: ../../standalone/drakfloppy:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
msgstr ""
-"Nema medija ili je zabranjeno pisanje na medij za uređaj %s.\n"
-"Molim ubacite neki medij."
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "Provjeri da li je medij prisutan za ovaj uredjaj %s"
+"Ovisno o osnovnom jeziku koji izaberete u Sekciji \"Jezik\", DrakX će\n"
+"automatski izabrati određeni tip tastature. Ipak, moĆŸda nemate tastaturu\n"
+"koja tačno odgovara vaơem jeziku: npr. ako ste Ơvajcarac koji govori\n"
+"engleski, moĆŸda imate ĆĄvajcarsku tastaturu. Ili ako govorite engleski ali\n"
+"se nalazite u Kvibeku, moĆŸda ćete se naći u situaciji gdje se vaĆĄ jezik i\n"
+"tastatura ne poklapaju. U svakom slučaju, ovaj korak instalacije vam\n"
+"omogućava da izaberete odgovarajuću tastaturu sa liste.\n"
+"\n"
+"Kliknite na dugme \"ViĆĄe\" kako bi vam bila predstavljena potpuna lista\n"
+"podrĆŸanih tastatura.\n"
+"\n"
+"Ako izaberete raspored tipaka koji je baziran na ne-latiničnoj abecedi,\n"
+"sljedeći dijalog će vam ponuditi da izaberete tipke pomoću kojih moĆŸete\n"
+"prebaciti tastaturu između latiničnog i ne-latiničnog rasporeda."
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build the disk"
-msgstr "Napravi disk"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "Opcije SMB (Windows 9x/NT) ơtampača"
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Output"
-msgstr "Ispis"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Remove a module"
-msgstr "Ukloni modul"
+msgid "mkinitrd optional arguments"
+msgstr "mkinitrd opcionalni argumenti"
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Add a module"
-msgstr "Dodaj modul"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
+"Surfajte koristeći Mozillu ili Konqueror, čitajte vaơu poơtu sa Evolution "
+"ili KMail, pravite vaĆĄe dokumente sa OpenOffice.org."
-#: ../../standalone/drakfloppy:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "omit scsi modules"
-msgstr "izostavi scsi module"
+msgid "Protocol for the rest of the world"
+msgstr "Protokol za ostatak svijeta"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "if needed"
-msgstr "ako je potrebno"
+msgid "Print test pages"
+msgstr "Ć tampaj testnu stranicu"
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "omit raid modules"
-msgstr "izostavi raid module"
+msgid "64 MB or more"
+msgstr "64 MB ili viĆĄe"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "force"
-msgstr "prisili"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
+"Molimo izaberite testne stranice koje ćete ơtampati.\n"
+"PaĆŸnja: foto testna stranica moĆŸe traĆŸiti dosta vremena za ĆĄtampu a na "
+"laserskim ĆĄtampačima sa malo memorije moĆŸda neće nikad ni izaći. U većini "
+"slučajeva dovoljno je odơtampati standardnu testnu stranicu."
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "mkinitrd optional arguments"
-msgstr "mkinitrd opcionalni argumenti"
+msgid "Please select the device where your %s is attached"
+msgstr "Molim izaberite uređaj gdje je priključen vaơ %s"
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Expert Area"
-msgstr "Ekspert područje"
+msgid "Not formatted\n"
+msgstr "Nije formatirana\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "kernel version"
-msgstr "Kernel verzija"
+msgid "Periodic Checks"
+msgstr "Periodične provjere"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "default"
-msgstr "Podrazumijevano"
+msgid "PXE Server Configuration"
+msgstr "PodeĆĄavanje PXE servera"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "General"
-msgstr "Općenito"
+msgid "Backup the system files before:"
+msgstr "Vrati sistemske datoteke prije:"
-#: ../../standalone/drakfloppy:1
+#: ../../security/level.pm:1
#, c-format
-msgid "boot disk creation"
-msgstr "Kreiranje boot diskete"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"Ovo je standardna sigurnost koja je preporučena za računar koji će biti "
+"koriĆĄten za spajanje na Internet kao klijent."
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "First floppy drive"
+msgstr "Prva disketna jedinica"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Size"
-msgstr "Veličina"
+msgid "/File/_Quit"
+msgstr "/Datoteka/_Izlaz"
-#: ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Module name"
-msgstr "Naziv modula"
+msgid "Dvorak"
+msgstr "Dvorak"
-#: ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Post Uninstall"
-msgstr "Post Uninstall"
+msgid "Choose the new size"
+msgstr "Izaberite novu veličinu"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Remove fonts on your system"
-msgstr "PobriĆĄi fontove sa mog sistema"
+msgid "Media class"
+msgstr "Klasa medija"
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Initial tests"
-msgstr "Probni inicijali"
+msgid "The %s is not known by this version of Scannerdrake."
+msgstr "Ova verzija Scannerdrake programa ne poznaje %s."
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Post Install"
-msgstr "Post Install"
+msgid "Faroe Islands"
+msgstr "Farska ostrva"
#: ../../standalone/drakfont:1
#, c-format
-msgid "Install & convert Fonts"
-msgstr "Instaliraj i konvertuj fontove"
+msgid "Restart XFS"
+msgstr "Restartuj XFS"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Copy fonts on your system"
-msgstr "Kopiraj fontove na sistem"
+msgid "Add host/network"
+msgstr "Dodaj računar/mreĆŸu"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Remove List"
-msgstr "PobriĆĄi listu"
+msgid ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
+msgstr ""
+"ako je postavljeno na da, provjerava prazne ĆĄifre, nedostatak ĆĄifre u /etc/"
+"shadow i korisnike sa id-om 0 koji nisu root."
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Selected All"
-msgstr "Sve izabrano"
+msgid "Please enter the directory to save to:"
+msgstr "Molimo unesite direktorij u koji ĆŸelite spasiti:"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Unselected All"
-msgstr "NiĆĄta izabrano"
+msgid "Model name"
+msgstr "Naziv modela"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "here if no."
-msgstr "ovdje ako ne."
+msgid "Albania"
+msgstr "Albanija"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "click here if you are sure."
-msgstr "kliknite ovdje ako ste sigurni."
+msgid "No CDR/DVDR in drive!"
+msgstr "Nema CDR/DVDR u drajvu!"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Install List"
-msgstr "Lista instalacije"
+msgid "British Indian Ocean Territory"
+msgstr "Britansko-Indijska morska teritorija"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Izaberite font datoteku ili direktorij i kliknite na 'Dodaj'"
+msgid "Normal Mode"
+msgstr "Normalni mod"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
+"Please be sure that the cron daemon is included in your services. \n"
"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-"Prije instaliranja fontova, provjerite da li imate dozvole da ih koristite i "
-"instalirate na va[em sistemu.\n"
+"Molim budite sigurni da je cron demon aktiviran u vaĆĄim servisima. \n"
"\n"
-"-MoĆŸete instalirati fontove koristeći uobičajen način. U rijetkim "
-"slučajevima, neispravni fontovi mogu zaglaviti vaơ X Server."
+"Obratite paĆŸnju da trenutno svi 'net' mediji takođe koriste hard disk."
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generic Printers"
-msgstr "Razni ơtampači"
+msgid "Printer connection type"
+msgstr "Tip konekcije ơtampača"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Abiword"
-msgstr "Abiword"
+msgid "No network adapter on your system!"
+msgstr "Nema mreĆŸnog adaptera na vaĆĄem sistemu!"
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
+msgid "Network %s"
+msgstr "MreĆŸa %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
+msgid "Malayalam"
+msgstr "Malayalam"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Izaberite aplikacije koje će podrĆŸavati fontove :"
+msgid "Option %s out of range!"
+msgstr "Opcija %s izvan raspona!"
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
-"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Hvala:\n"
-" - pfm2afm: \n"
-"\t autor: Ken Borgendale:\n"
-"\t Konvertuje Windows .pfm datoteke u .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t autor: James Macnicol: \n"
-"\t GeneriĆĄe datoteke fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t autor: Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Konvertuje ttf font datoteke u afm i pfb fontove\n"
+msgid "Connect %s"
+msgstr "Konektuj se na %s"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "About"
-msgstr "O programu"
+msgid "Restarting CUPS..."
+msgstr "Restartujem CUPS..."
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Font List"
-msgstr "Lista fontova"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "Ć tampam/skeniram/foto kartica na \"%s\""
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Advanced Options"
-msgstr "Napredne opcije"
+msgid "Duplicate mount point %s"
+msgstr "Dvostruka tačka montiranja %s"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Uninstall Fonts"
-msgstr "Deinstaliraj fontove"
+msgid "if set to yes, run chkrootkit checks."
+msgstr "ako je postavljeno na da, izvrĆĄava chkrootkit provjere."
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Get Windows Fonts"
-msgstr "Preuzmi fontove iz Windowsa"
+msgid "Connection Configuration"
+msgstr "PodeĆĄavanje konekcije"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Import Fonts"
-msgstr "Uvoz fontova"
+msgid "Unknown|Generic"
+msgstr "Nepoznat|OpĆĄti"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
+msgstr ""
+"Prilikom instalacije Mandrake Linuxa, moguće je da su neki paketi\n"
+"aĆŸurirani od zadnjeg izdanja. Moguće je da su ispravljeni bugovi ili\n"
+"rjeĆĄena neka sigurnosna pitanja. Ako ĆŸelite iskoristiti ova unaprjeđenja,\n"
+"moĆŸete ih sada dobaviti sa Interneta. Izaberite \"Da\" ako imate ispravnu\n"
+"Internet vezu, ili \"Ne\" ako ćete radije instalirati aĆŸurirane pakete\n"
+"kasnije.\n"
+"\n"
+"Ako izaberete \"Da\" dobićete listu mjesta sa kojih se mogu skinuti\n"
+"novi paketi. Izaberite ono najbliĆŸe vama. Pojaviće se stablo za izbor\n"
+"paketa: pregledajte izabrano i pritisnite \"Instaliraj\" da dobavite i\n"
+"instalirate izabrane pakete, ili \"Odustani\" za prekid."
+
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "done"
-msgstr "gotovo"
+msgid "Quit"
+msgstr "Izlaz"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "xfs restart"
-msgstr "restart xfs-a"
+msgid "Myanmar"
+msgstr "Myanmar"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Suppress Fonts Files"
-msgstr "Onemogući datoteke fontova"
+msgid "Auto allocate"
+msgstr "Auto alokacija"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restart XFS"
-msgstr "Restartuj XFS"
+msgid "Check bad blocks?"
+msgstr "Provjeri loĆĄe blokove?"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Suppress Temporary Files"
-msgstr "Onemogući privremene datoteke"
+msgid "Other MultiMedia devices"
+msgstr "Drugi multimedijalni uređaj"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "type1inst building"
-msgstr "type1inst kreiranje"
+msgid "No remote machines"
+msgstr "Nema udaljenih računara"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "pfm fonts conversion"
-msgstr "pfm fonts konverzija"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"Dobro doơli u Čarobnjak za podeơavanje ơtampača\n"
+"\n"
+"Ovaj čarobnjak će vam pomoći da instalirate ơtampače spojene na ovaj "
+"računar.\n"
+"\n"
+"Ako imate ơtampač spojen na ovaj računar, molim priključite ga na računar i "
+"upalite ga kako bi bio auto-prepoznat.\n"
+"\n"
+"Kliknite na \"Dalje\" kada budete spremni, ili na \"Odustani\" ako ne ĆŸelite "
+"podesiti ơtampač sada."
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "ttf fonts conversion"
-msgstr "ttf fonts konverzija"
+msgid "Authentication NIS"
+msgstr "Autentifikacija NIS"
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Ghostscript referencing"
-msgstr "Ghostscript referenciranje"
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr "Opcija ``Ograniči opcije komandne linije'' je beskorisna bez ơifre"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Fonts conversion"
-msgstr "Konverzija fontova"
+msgid "Internet Connection Sharing currently enabled"
+msgstr "Dijeljenje Internet konekcije je trenutno aktivno"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "True Type install done"
-msgstr "ZavrĆĄena True Type instalacija"
+msgid "Card IO_0"
+msgstr "IO_0 kartice"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "molimo sačekajte tokom ttmkfdir..."
+msgid "United Arab Emirates"
+msgstr "Ujedinjeni Arapski Emirati"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "True Type fonts installation"
-msgstr "Instalacija True Type fontova"
+msgid "Card IO_1"
+msgstr "IO_1 kartice"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Fonts copy"
-msgstr "Kopiranje fontova"
+msgid "Thailand"
+msgstr "Tajland"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Search for fonts in installed list"
-msgstr "PretraĆŸi fontove na listi instaliranih"
+msgid "Routers:"
+msgstr "Routeri:"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "could not find any font.\n"
-msgstr "ne mogu naći nijedan font.\n"
+msgid "Kazakhstan"
+msgstr "Kazahstan"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Reselect correct fonts"
-msgstr "Ponovo izaberi ispravne fontove"
+msgid "Display all available remote CUPS printers"
+msgstr "PrikaĆŸi sve dostupne CUPS ĆĄtampače"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_newt.pm:1
#, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr "ne mogu naći nijedan font na montiranim particijama"
+msgid "Mandrake Linux Installation %s"
+msgstr "Mandrake Linux instalacija %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "no fonts found"
-msgstr "nije pronađen nijedan font"
+msgid "Thai keyboard"
+msgstr "Tajlandska tastatura"
-#: ../../standalone/drakfont:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "parse all fonts"
-msgstr "obradi sve fontove"
+msgid "Dialup options"
+msgstr "Opcije dialupa"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unselect fonts installed"
-msgstr "Isključi instalirane fontove"
+msgid "Bouvet Island"
+msgstr "Ostrvo Bouvet"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Search installed fonts"
-msgstr "PretraĆŸi instalirane fontove"
+msgid "If no port is given, 631 will be taken as default."
+msgstr "Ako nije naveden port, podrazumijevaće se 631."
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
+"Change your Cd-Rom!\n"
"\n"
-"Click on Configure to launch the setup wizard."
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
-"DobrodoĆĄli u alat za Dijeljenje Internet konekcije!\n"
-"\n"
-"%s\n"
+"Promijenite vaĆĄ CD-ROM!\n"
"\n"
-"Kliknite na Podesi da pokrenete čarobnjak."
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "PodeĆĄavanje dijeljenja Internet konekcije"
+"Molimo ubacite CD označen sa \"%s\" u vaơ CD-ROM uređaj i pritisnite \"U redu"
+"\" kad ste spremni.\n"
+"Ako ga nemate, pritisnite \"Odustani\" da biste preskočili instalaciju sa "
+"tog CD-ROMa."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Dijeljenje Internet konekcije nije nikad podeĆĄeno."
+msgid "Polish"
+msgstr "Poljska"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Podeơavanje je već zavrơeno i trenutno je uključeno."
+msgid "Mandrake Online"
+msgstr "Mandrake Online"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Podeơavanje je već zavrơeno, ali je trenutno isključeno."
+msgid "\t-Network by webdav.\n"
+msgstr "\t-MreĆŸu preko webdav-a.\n"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
msgstr ""
-"Sve je konfigurisano.\n"
-"Sada moĆŸete dijeliti Internet konekciju sa ostalim računarima na vaĆĄoj "
-"lokalnoj mreĆŸi, koristeći automatsku mreĆŸnu konfiguraciju (DHCP)."
+"Na vaĆĄem sistemu nije pronađen nijedan ethernet mreĆŸni adapter. Molimo "
+"pokrenite alat za podeĆĄavanje hardware-a."
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemi tokom instaliranja paketa %s"
+msgid "Netmask"
+msgstr "Netmask"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Podeơavam skripte, instaliram software, pokrećem servere..."
+msgid "No hard drives found"
+msgstr "Nije pronađen nijedan hard disk"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring..."
-msgstr "PodeĆĄavam..."
+msgid "Logitech CC Series"
+msgstr "Logitech CC Series"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Potencijalan konflikt LAN adresa pronađen u trenutnoj konfiguraciji %s!\n"
+msgid "2 buttons"
+msgstr "2 dugmeta"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Lokalna mreĆŸa se ne zavrĆĄava sa `.0', izlazim."
+msgid "What kind is your ISDN connection?"
+msgstr "Koje je vrste vaĆĄa ISDN konekcija?"
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "Ponovo podesi interfejs i DHCP server"
+msgid "Label"
+msgstr "Oznaka"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr "Maksimalni lease (u sekundama)"
+msgid "Save on floppy"
+msgstr "Spasi na disketu"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The default lease (in seconds)"
-msgstr "Podrazumjevani lease (u sekundama)"
+msgid "Printer auto-detection"
+msgstr "Auto prepoznavanje ơtampača"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The DHCP end range"
-msgstr "Kraj DHCP raspona"
+msgid "Which of the following is your ISDN card?"
+msgstr "Koja od navedenih je vaĆĄa ISDN kartica?"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
-msgid "The DHCP start range"
-msgstr "Početak DHCP raspona"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
+msgstr ""
+"NFS je popularan protokol za dijeljenje datoteka preko TCP/IP mreĆŸa.\n"
+"Ovaj servis omogućuje funkcionalnost NFS servera, kojeg podeơavate\n"
+"putem /etc/exports datoteke."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The internal domain name"
-msgstr "Interno domensko ime"
+msgid "Msec"
+msgstr "Msec"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "The DNS Server IP"
-msgstr "IP adresa DNS servera"
+msgid ""
+"=> Notice, a label changed:\n"
+"%s"
+msgstr ""
+"=> Primjetite, label je promijenjena:\n"
+"%s"
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "IP adresa (ovog) DHCP servera"
+msgid "Number of capture buffers:"
+msgstr "Broj capture buffera:"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
+msgid "Your choice? (0/1, default `%s') "
+msgstr "VaĆĄ izbor? (0/1, podrazumjevano %s)"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"DHCP Server Configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
"\n"
-msgstr ""
-"PodeĆĄavanje DHCP servera.\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
"\n"
-"Ovdje moĆŸete izabrati različite opcije za podeĆĄavanje DHCP servera.\n"
-"Ako ne znate značenje neke opcije, jednostavno je ostavite kako jeste.\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
"\n"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Local Network adress"
-msgstr "Lokalna mreĆŸna adresa"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
msgstr ""
-"Mogu zadrĆŸati trenutnu konfiguraciju i pretpostaviti da ste već podesili "
-"DHCP server; u tom slučaju molim provjerite da li sam ispravno pročitao "
-"MreĆŸnu adresu koju ćete koristiti na lokalnoj mreĆŸi; neću je ponovo podesiti "
-"i neću mijenjati vaơe postavke DHCP servera.\n"
+"Sve particije koje su upravo definisane moraju biti formatirane kako bi se\n"
+"mogle koristiti (formatiranje znači kreiranje datotečnog sistema). \n"
"\n"
-"PredloĆŸena DNS postavka je Caching nameserver koji je podeĆĄen na firewallu. "
-"MoĆŸete je zamijeniti npr. IP adresom DNS servera vaĆĄeg ISPa.\n"
-"\t\t \n"
-"Ako ne, mogu ponovo podesiti vaĆĄ interfejs i podesiti DHCP server za vas.\n"
+"U ovom trenutku moĆŸda ćete poĆŸeljeti da reformatirate neke već postojeće\n"
+"particije kako biste pobrisali podatke koje sadrĆŸe. Ako ĆŸelite to učiniti, "
+"molim\n"
+"takođe izaberite i te particije.\n"
+"\n"
+"Molim obratite paĆŸnju da nije neophodno formatirati sve postojeće "
+"particije.\n"
+"Morate reformatirati particije koje sadrĆŸe operativni sistem (kao ĆĄto su\n"
+"\"/\", \"/usr\" ili \"var\") ali ne morate reformatirati particije koje "
+"sadrĆŸe\n"
+"podatke koje ĆŸelite zadrĆŸati (tipično /home).\n"
"\n"
+"Molimo da paĆŸljivo izaberete particije. Nakon formatiranja, svi podaci na\n"
+"odabranim particijama će biti pobrisani i nećete biti u mogućnosti da ih\n"
+"povratite.\n"
+"\n"
+"Kliknite na \"Dalje ->\" kada budete spremni za formatiranje particija.\n"
+"\n"
+"Kliknite na \"<- Nazad\" ako ĆŸelite da izaberete druge particije za "
+"instalaciju\n"
+"vaĆĄeg novog Linux-Mandrake operativnog sistema.\n"
+"\n"
+"Kliknite na \"Napredno\" da izaberete particije koje ĆŸelite provjeriti radi\n"
+"loĆĄih blokova."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "French"
+msgstr "Francuska"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTY)"
+msgstr "Čeơka (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
+#, c-format
+msgid "Hardware probing in progress"
+msgstr "Hardversko probanje u toku"
#: ../../standalone/drakgw:1
#, c-format
+msgid "Net Device"
+msgstr "MreĆŸni uređaj"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Summary"
+msgstr "Ukratko"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
-"Trenutna konfiguracija `%s':\n"
-"\n"
-"MreĆŸa: %s\n"
-"IP adresa: %s\n"
-"IP atributi: %s\n"
-"Drajver: %s"
+" (Paralelni portovi: /dev/lp0, /dev/lp1, ..., ekvivalentno sa LPT1:, "
+"LPT2:, ..., prvi USB ơtampač: /dev/usb/lp0, drugi USB ơtampač: /dev/usb/"
+"lp1, ...)."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Current interface configuration"
-msgstr "Postavke trenutnog interfejsa"
+msgid "Next"
+msgstr "Sljedeći"
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Show current interface configuration"
-msgstr "PrikaĆŸi postavke trenutnog interfejsa"
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "Ne moĆŸete instalirati bootloader na %s particiju\n"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "No (experts only)"
-msgstr "Ne (samo eksperti)"
+msgid "CHAP"
+msgstr "CHAP"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Automatic reconfiguration"
-msgstr "Automatsko ponovno podeĆĄavanje"
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp/zeroconf)"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
"\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
"\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
-"Upozorenje, mreĆŸni adapter (%s) je već podeĆĄen.\n"
"\n"
-"Da li ĆŸelite automatsko ponovno podeĆĄavanje?\n"
+"Dobro doĆĄli.\n"
"\n"
-"To moĆŸete obaviti ručno, ali morate znati ĆĄta radite."
+"Parametri automatske instalacije su dostupni u odjeljcima lijevo"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface already configured"
-msgstr "MreĆŸni interfejs je već podeĆĄen"
+msgid "Puerto Rico"
+msgstr "Portoriko"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""
-"Molimo izaberite koji mreĆŸni adapter će biti spojen na vaĆĄu Lokalnu mreĆŸu."
+"za dovrĆĄavanje podeĆĄavanja potreban je paket 'ImageMagick'.\n"
+"Kliknite na \"U redu\" da instalirate 'ImageMagick' ili \"Odustani\" za izlaz"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "Litvanska \"red brojeva\" QWERTY"
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
-"%s\n"
"\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
msgstr ""
-"Trenutno je samo jedan mreĆŸni adapter podeĆĄen na vaĆĄem sistemu:\n"
+"Da bi se omogućilo unaprjeđenje vaơeg sistema, biće uklonjeni sljedeći "
+"paketi: %s\n"
"\n"
-"%s\n"
"\n"
-"Sada ću podesiti vaĆĄu Lokalnu mreĆŸu sa ovim adapterom."
+"Ćœelite li zaista deinstalirati ove pakete?\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface"
-msgstr "MreĆŸni interface"
+msgid "Anguilla"
+msgstr "Anguilla"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Na vaĆĄem sistemu nije pronađen nijedan ethernet mreĆŸni adapter. Molimo "
-"pokrenite alat za podeĆĄavanje hardware-a."
+msgid "NIS Domain"
+msgstr "NIS domen"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No network adapter on your system!"
-msgstr "Nema mreĆŸnog adaptera na vaĆĄem sistemu!"
+msgid ""
+"\n"
+"- User Files:\n"
+msgstr ""
+"\n"
+"- korisničke datoteke:\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s"
-msgstr "Interfejs %s"
+msgid "Antarctica"
+msgstr "Antarktik"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interfejs %s (koristeći modul %s)"
+msgid "Mount options"
+msgstr "Opcije montiranja"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Net Device"
-msgstr "MreĆŸni uređaj"
+msgid "Jamaica"
+msgstr "Jamajka"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
-"Molim unesite naziv interfejsa spojenog na Internet.\n"
-"\n"
-"Primjeri:\n"
-"\t\tppp+ za modemsku ili DSL konekciju, \n"
-"\t\teth0, ili eth1 za mreĆŸnu konekciju, \n"
-"\t\tippp+ za isdn konekciju.\n"
+"Dodjeljuje raw uređaje blokovskim uređajima (kao ơto su\n"
+"particije hard diska), za potrebu aplikacija kao ĆĄto je Oracle ili DVD "
+"playeri"
-#: ../../standalone/drakgw:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
msgstr ""
-"Sada ćete konfigurisati vaơ računar za dijeljenje Internet konekcije.\n"
-"Sa ovom opcijom, ostali računari na vaĆĄoj lokalnoj mreĆŸi će moći koristiti "
-"Internet konekciju ovog računara. \n"
-"\n"
-"Prije nego ĆĄto nastavite, provjerite da li ste podesili vaĆĄ mreĆŸni/internet "
-"pristup koristeći drakconnect.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Napomena: potreban vam je poseban MreĆŸni adapter da biste podesili Lokalnu "
-"mreĆŸu (LAN)."
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Dijeljenje Internet konekcije"
+msgid "Please wait, preparing installation..."
+msgstr "Molim sačekajte, pripremam instalaciju..."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Dijeljenje Internet konekcije je sada uključeno."
+msgid "Czech (QWERTZ)"
+msgstr "Čeơka (QWERTZ)"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Enabling servers..."
-msgstr "Uključujem servere..."
+msgid "Track network card id (useful for laptops)"
+msgstr "Otkrij id mreĆŸne karte (korisno za laptope)"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "dismiss"
-msgstr "otkaĆŸi"
+msgid "The port number should be an integer!"
+msgstr "Broj porta treba biti cijeli broj!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "reconfigure"
-msgstr "rekonfiguriĆĄi"
+msgid "You must choose an image file first!"
+msgstr "Morate izabrati image datoteku!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "enable"
-msgstr "uključi"
+msgid "Restore from Hard Disk."
+msgstr "Vrati sa hard diska"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Dijeljenje Internet konekcije je već podeơeno. Trenutno je\n"
-"neaktivno (isključeno).\n"
-"\n"
-"Ć ta ĆŸelite uraditi?"
+msgid "Add to LVM"
+msgstr "Dodaj na LVM"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Dijeljenje Internet konekcije je trenutno neaktivno"
+msgid "DNS server"
+msgstr "DNS server"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Dijeljenje Internet konekcije je sada isključeno."
+msgid "Trinidad and Tobago"
+msgstr "Trinidad i Tobago"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disabling servers..."
-msgstr "Isključujem servere..."
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr "LPD i LPRng ne podrĆŸavaju IPP ĆĄtampače.\n"
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "disable"
-msgstr "isključi"
+msgid "simple"
+msgstr "jednostavno"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Dijeljenje Internet konekcije je već podeơeno. Trenutno je\n"
-"aktivno.\n"
-"\n"
-"Ć ta ĆŸelite uraditi?"
+msgid "Clear all"
+msgstr "ObriĆĄi sve"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Dijeljenje Internet konekcije je trenutno aktivno"
+msgid "No test pages"
+msgstr "Nijedna testna strana"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
-msgstr "Ćœalim, podrĆŸavamo samo 2.4 kernele."
+msgid "Adapter %s: %s"
+msgstr "Adapter %s: %s"
-#: ../../standalone/drakhelp:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
-msgstr ""
-"Nemate nijedan browser instaliran na vaĆĄem sistemu. Molim instalirajte jedan "
-"ako ĆŸelite pristupiti sistemu pomoći"
+msgid "Falkland Islands (Malvinas)"
+msgstr "Falklandsko otočje"
-#: ../../standalone/drakperm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Path"
-msgstr "Staza"
+msgid "Unknown model"
+msgstr "Nepoznat model"
-#: ../../standalone/drakperm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "group :"
-msgstr "grupa :"
+msgid "if set to yes, check files/directories writable by everybody."
+msgstr ""
+"ako je postavljeno na da, provjerava datoteke/direktorije koje svako moĆŸe "
+"pisati."
-#: ../../standalone/drakperm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "authentication"
+msgstr "Autentikacija"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "user :"
-msgstr "korisnik :"
+msgid "Backup Now"
+msgstr "Backup-uj sada"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Path selection"
-msgstr "Izbor staze"
+msgid "/_File"
+msgstr "/_Datoteka"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "when checked, owner and group won't be changed"
-msgstr "kada je uključeno, vlasnik i grupa se ne mogu promijeniti"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Uklanjam ơtampač iz Star/Open Offica"
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
#, c-format
-msgid "Use group id for execution"
-msgstr "Koristi id grupe za izvrĆĄavanje"
+msgid ""
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
+msgstr ""
+"Pokreće filtriranje paketa za Linux kernele serije 2.2 kako\n"
+"bi se aktivirao firewall i zaĆĄtitio vaĆĄ računar od mreĆŸnih napada."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Use owner id for execution"
-msgstr "Koristi id vlasnika za izvrĆĄavanje"
+msgid "Tamil (ISCII-layout)"
+msgstr "Tamilska (ISCII)"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
-"Koristi se za direktorij:\n"
-" samo vlasnik tog direktorija ili datoteke u ovom direktoriju ga moĆŸe "
-"obrisati"
+msgid "Mayotte"
+msgstr "Mayotte"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Set-GID"
-msgstr "Set-GID"
+msgid "Creating auto install floppy..."
+msgstr "Pravim auto instalacijsku disketu..."
-#: ../../standalone/drakperm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Set-UID"
-msgstr "Set-UID"
+msgid "Searching for scanners ..."
+msgstr "TraĆŸim skenere ..."
-#: ../../standalone/drakperm:1
+#: ../../steps.pm:1
#, c-format
-msgid "sticky-bit"
-msgstr "sticky-bit"
+msgid "Partitioning"
+msgstr "Particioniranje"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Property"
-msgstr "Osobina"
+msgid "Russia"
+msgstr "Rusija"
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Permissions"
-msgstr "Privilegije"
+msgid "ethernet card(s) detected"
+msgstr "prepoznata ethernet kartica(e)"
-#: ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Current user"
-msgstr "Trenutni korisnik"
+msgid "Syslog"
+msgstr "Syslog"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "browse"
-msgstr "pregledaj"
+msgid "Can't create catalog!"
+msgstr "Ne mogu napraviti katalog!"
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Edit current rule"
-msgstr "Izmijeni trenutno pravilo"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
+msgstr ""
+"ZaokruĆŸite vaĆĄ sigurnosni sistem ovim vrlo jednostavnim softverom koji spaja "
+"komponente visokih performansi, kao ĆĄto je firewall, VPN server i klijent, "
+"sistem za detekciju upada (intrusion detection system) inadzor saobraćaja."
-#: ../../standalone/drakperm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "edit"
-msgstr "izmijeni"
+msgid "Not enough free space for auto-allocating"
+msgstr "Nema dovoljno prostora za auto-alokaciju"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Delete selected rule"
-msgstr "ObriĆĄi izabrano pravilo"
+msgid "Set root password"
+msgstr "Podesite root ĆĄifru"
-#: ../../standalone/drakperm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "delete"
-msgstr "obriĆĄi"
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
+msgstr ""
+"Nema slobodnih drajvera za vaơu zvučnu karticu (%s), ali postoji vlasnički "
+"drajver na \"%s\"."
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Add a new rule at the end"
-msgstr "Dodaj novo pravilo na kraj"
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr ""
+"Nakon promjene veličine particije %s, svi podaci na njoj će biti izgubljeni"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "add a rule"
-msgstr "dodaj pravilo"
+msgid "Internet connection configuration"
+msgstr "PodeĆĄavanje Internet konekcije"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Move selected rule down one level"
-msgstr "Pomjeri izabrano pravilo dole za jedan nivo"
+msgid "Scanning for TV channels"
+msgstr "TraĆŸim TV kanale"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Down"
-msgstr "Dolje"
+msgid "Kernel:"
+msgstr "Kernel:"
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Move selected rule up one level"
-msgstr "Pomjeri izabrano pravilo za jedan nivo gore"
+msgid "/_About..."
+msgstr "/_O programu..."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Up"
-msgstr "Gore"
+msgid "Bengali"
+msgstr "Bengalska"
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "select perm file to see/edit"
-msgstr "izaberi perm datoteku za pregled/izmjenu"
+msgid "Preference: "
+msgstr "Preference: "
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-"Drakperm se koristi da pregledate datoteke koje ĆŸelite koristiti za primjenu "
-"privilegija, vlasnika i grupa putem msec-a.\n"
-"MoĆŸete također izmijeniti vaĆĄa vlastita pravila koja će prepisati "
-"podrazumijevana pravila."
+msgid "Wizard..."
+msgstr "Čarobnjak..."
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "permissions"
-msgstr "privilegije"
+msgid "Services: %d activated for %d registered"
+msgstr "Servisi: %d aktiviran za %d registrovan"
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1
#, c-format
-msgid "group"
-msgstr "grupa"
+msgid "Create a bootdisk"
+msgstr "Napravite boot disketu"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "user"
-msgstr "korisnik"
+msgid "Solomon Islands"
+msgstr "Solomonska ostrva"
-#: ../../standalone/drakperm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "path"
-msgstr "staza"
+msgid "(module %s)"
+msgstr "(modul %s)"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Lokacija datoteke auto_install.cfg"
+msgid "Workgroup"
+msgstr "Radna grupa"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
-"Molim navedite gdje se nalazi datoteka auto_install.cfg.\n"
-"\n"
-"Ostavite ovo praznim ako ne ĆŸelite podesiti reĆŸim automatske instalacije.\n"
-"\n"
+msgid "Printer host name or IP"
+msgstr "Hostname ơtampača ili IP adresa"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
-"Nije pronađena nijedna CD ili DVD slika, molim kopirajte instalacioni "
-"program i rpm datoteke."
+msgid "Host Path or Module"
+msgstr "Staza ili modul računara"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No image found"
-msgstr "Nije pronađen nijedan image"
+msgid "Name of printer should contain only letters, numbers and the underscore"
+msgstr "Naziv ơtampača bi se trebao sastojati od slova, brojeva i donje linije"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Installation image directory"
-msgstr "Direktorij instalacionog image-a"
+msgid "Show current interface configuration"
+msgstr "PrikaĆŸi postavke trenutnog interfejsa"
-#: ../../standalone/drakpxe:1
+#: ../../help.pm:1
#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
-"Molim navedite gdje se nalazi instalaciona slika.\n"
-"\n"
-"Ako nemate postojeći direktorij, molim kopirajte sadrĆŸaj CDa ili DVDa.\n"
-"\n"
+msgid "Development"
+msgstr "Programiranje"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "The DHCP end ip"
-msgstr "Krajnja DHCP adresa"
+msgid "Done"
+msgstr "Gotovo"
-#: ../../standalone/drakpxe:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "The DHCP start ip"
-msgstr "Početna DHCP adresa"
+msgid "Web Server"
+msgstr "Web server"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
-msgstr ""
-"DHCP server omogućuje pokretanje drugih računara koristeći PXE u zadatom "
-"rasponu adresa.\n"
-"\n"
-"MreĆŸna adresa je %s koristeći netmasku %s.\n"
-"\n"
+msgid "\tDo not include System Files\n"
+msgstr "\tNe uključuj sistemske datoteke\n"
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Interfejs %s (na mreĆŸi %s)"
+msgid "Chile"
+msgstr "Čile"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
+msgid ""
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
msgstr ""
-"Molimo izaberite koji mreĆŸni interfejs ĆŸelite koristiti za spajanje na DHCP "
-"server."
+"Inkjet drajveri za ĆĄtampu koje obezbjeđuje Lexmark podrĆŸavaju samo lokalne "
+"ơtampače, a ne i ơtampače na udaljenim računarima ili print serverima. "
+"Molimo spojite vaơ ơtampač na lokalni port ili ga podesite na računaru na "
+"koji je spojen."
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Do not use \"scannerdrake\" for this device!"
msgstr ""
-"Sada ćete podesiti instalacioni server, koji se sastoji od PXE servera (DHCP "
-"servera) i TFTP servera.\n"
-"Sa ovom opcijom, moći ćete instalirati Mandrake Linux na druge računare na "
-"vaĆĄoj lokalnoj mreĆŸi koristećiovaj računar kao izvor.\n"
-"\n"
-"Prije nego ĆĄto nastavite, provjerite da li ste podesili mreĆŸni/internet "
-"pristup koristeći drakconnect.\n"
+"Vaơ viơenamjenski uređaj je automatski konfigurisan kako bi mogao skenirati. "
+"Sada moĆŸete skenirati sa komandne linije pomoću komande \"scanimage"
+"\" (\"scanimage -d hp:%s\" kako biste naveli scanner ako imate viĆĄe od "
+"jednog) ili koristeći grafičke okoline \"xscanimage\" ili \"xsane\". Ako "
+"koristite GIMP, moĆŸete također skenirati koristeći odgovarajuću stavku u "
+"meniju \"File\"/\"Acquire\". Za viĆĄe informacija, pogledajte joĆĄ i \"man "
+"scanimage\" na komandnoj liniji (\"#scanimage\" u Konqueroru).\n"
"\n"
-"Napomena: potreban vam je poseban MreĆŸni adapter da biste podesili Lokalnu "
-"mreĆŸu (LAN)."
+"Nemojte koristiti \"scannerdrake\" za ovaj uređaj!"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
#, c-format
-msgid "Installation Server Configuration"
-msgstr "PodeĆĄavanje instalacionog servera"
+msgid "(already added %s)"
+msgstr "(već dodan %s)"
-#: ../../standalone/drakpxe:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "PXE Server Configuration"
-msgstr "PodeĆĄavanje PXE servera"
+msgid ", using command %s"
+msgstr ", koristeći komandu %s"
-#: ../../standalone/draksec:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please wait, setting security options..."
-msgstr "Molim sačekajte, podeơavam sigurnosne opcije..."
+msgid "Alt and Shift keys simultaneously"
+msgstr "Alt i Shift tipke istovremeno"
-#: ../../standalone/draksec:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Please wait, setting security level..."
-msgstr "Molim sačekajre, podeơavam nivo sigurnosti..."
+msgid "Flags"
+msgstr "Flagovi"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Periodic Checks"
-msgstr "Periodične provjere"
+msgid "Add/Del Users"
+msgstr "Dodaj/obriĆĄi korisnike"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "System Options"
-msgstr "Sistemske opcije"
+msgid "Host/network IP address missing."
+msgstr "Nedostaje IP adresa računara/mreĆŸe."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Network Options"
-msgstr "MreĆŸne opcije"
+msgid "weekly"
+msgstr "sedmično"
-#: ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Settings"
+msgstr "PodeĆĄavanja"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The entered host/network IP is not correct.\n"
+msgstr "Unesena IP adresa računara/mreĆŸe nije ispravna.\n"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Here is the full list of available countries"
+msgstr "Ovdje je puna lista svih dostupnih drĆŸava"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Alternative test page (A4)"
+msgstr "Alternativna testna strana (A4)"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
-"MoĆŸete podesiti sljedeće opcije kako biste prilagodili\n"
-"sigurnost vaơeg sistema. Ako vam je potrebno objaơnjenje, pogledajte pomoć u "
-"tooltipu.\n"
+"Ako imate sve CDe na listi, kliknite na Ok.\n"
+"Ako nemate nijedan od ovih CDova, kliknite na Odustani.\n"
+"Ako nedostaju samo neki CDovi, isključite ih, zatim kliknite na Ok."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Security Administrator:"
-msgstr "Sigurnosni administrator:"
+msgid "Wait please"
+msgstr "Molim sačekajte"
-#: ../../standalone/draksec:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Security Alerts:"
-msgstr "Sigurnosna upozorenja:"
+msgid "PAP"
+msgstr "PAP"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Security Level:"
-msgstr "Nivo sigurnosti:"
+msgid "Backup user files"
+msgstr "Backup korisničkih datoteka"
-#: ../../standalone/draksec:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "(default value: %s)"
-msgstr " (default vrijednost: %s)"
+msgid "New"
+msgstr "Novi"
-#: ../../standalone/draksec:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-" to the Internet as a client.\n"
-"\n"
-"High: There are already some restrictions, and more automatic checks "
-"are run every night.\n"
-"\n"
-"Higher: The security is now high enough to use the system as a server "
-"which can accept\n"
-" connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-" should choose a lower level.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
"\n"
-"Paranoid: This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-" features are at their maximum\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
"\n"
-"Security Administrator:\n"
-" If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-" email)"
-msgstr ""
-"Standardan: Ovo je standardna sigurnost koja se preporučuje za računar koji "
-"će biti koriơten za\n"
-" spajanje na Internet kao klijent.\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
"\n"
-"Visok: Postoje već neka ograničenja, a automatizovane provjere se "
-"vrơe svake noći.\n"
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
"\n"
-"ViĆĄi: Sigurnost je sada dovoljno visoka da bi se sistem mogao "
-"koristiti kao server koji\n"
-" prihvata konekcije od mnogih klijenata. Ako je vaĆĄ "
-"računar jedini klijent na Internetu,\n"
-" trebali biste izabrati niĆŸi nivo.\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
"\n"
-"Paranoičan: Ovo je slično kao prethodni nivo, ali je sistem potpuno "
-"zatvoren i sigurnosne\n"
-" mogućnosti su na maksimumu.\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
"\n"
-"Sigurnosni administrator:\n"
-" Ako je postavljena opcija 'Sigurnosna upozorenja', ova "
-"upozorenja će biti slana ovom\n"
-" korisniku (korisničko ime ili email)."
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
+msgstr ""
+"Ovo je najvaĆŸnija odluka za sigurnost vaĆĄeg GNU/Linux sistema: trebate\n"
+"unijeti \"root\" ĆĄifru, \"Root\" je sistemski administrator i jedini "
+"korisnik kojem\n"
+"je dozvoljeno da updatuje sistem, dodaje druge korisnike, mijenja "
+"konfiguraciju\n"
+"sistema itd. Ukratko, \"root\" moĆŸe raditi sve! Stoga trebate izabrati ĆĄifru "
+"koju\n"
+"je teơko pogoditi - DrakX će vam reći da li je ơifra koju ste odabrali "
+"prelagana.\n"
+"Kao ĆĄto moĆŸete vidjeti, niste prisiljeni da unesete ĆĄifru, ali vam "
+"savjetujemo da\n"
+"to uradite. GNU/Linux je podloĆŸan operatorskim greĆĄkama kao i bilo koji "
+"drugi\n"
+"operativni sistem. PoĆĄto \"root\" moĆŸe prevazići sva ograničenja i "
+"nenamjerno\n"
+"pobrisati sve podatke na particijama neoprezno im pristupajući, vaĆŸno je da "
+"je\n"
+"teĆĄko postati \"root\".\n"
"\n"
+"Ơifra treba biti kombinacija alfanumeričkih znakova i biti barem 8 znakova "
+"duga.\n"
+"Nikad ne zapisujte \"root\" ĆĄifru -- time vaĆĄ sistem postaje lagano "
+"kompromitovati.\n"
"\n"
+"Jedan izuzetak -- ne dozvolite da ĆĄifra bude preduga ili prekomplikovana "
+"poĆĄto\n"
+"ćete je morati zapamtiti!\n"
"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
-msgstr ""
+"Ơifra neće biti prikazana na ekranu dok je unosite. Da bismo smanjili "
+"mogućnost\n"
+"greơke zbog kucanja naslijepo, moraćete unijeti ơifru dva puta. Ako nekim\n"
+"slučajem ponovite istu greơku dva puta, ovu ''neispravnu'' ơifru trebate "
+"koristiti\n"
+"prilikom prve prijave.\n"
"\n"
+"Ako ĆŸelite da pristup ovom računaru bude kontroliran pomoću servera za\n"
+"autentikaciju, kliknite na dugme \"Napredno\".\n"
"\n"
+"Ako vaĆĄa mreĆŸa koristi LDAP, NIS ili PDC Windows domen autentikacione\n"
+"servise, izaberite odgovarajući kao \"autentikaciju\". Ako ne znate koji\n"
+"koristiti, pitajte vaĆĄeg mreĆŸnog administratora.\n"
"\n"
-"Napomena: ako imate ISA PnP zvučnu karticu, moraćete koristiti sndconfig "
-"program. Samo ukucajte \"sndconfig\" na konzoli."
+"Ako imate problema sa pamćenjem ĆĄifara, moĆŸete izabrati opciju \"Bez\n"
+"ơifre\", pod uslovom da vaơ računar neće biti spojen na Internet i da\n"
+"vjerujete svakome ko mu ima fizički pristup."
-#: ../../standalone/draksound:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"If you do not know what to choose, stay with the default option."
msgstr ""
-"Nije pronađena nijedna zvučna kartica na vaơoj maơini. Molim provjerite da "
-"li je ispravno spojena zvučna kartica koja je podrĆŸana pod Linuxom.\n"
-"\n"
-"\n"
-"MoĆŸete posjetiti naĆĄu bazu hardvera na:\n"
-"\n"
+"Na ovom mjestu, DrakX vam omogućuje da izaberete sigurnosni nivo\n"
+"koji ĆŸelite imati na ovom računaru. Kao pravilo, sigurnosni nivo treba biti\n"
+"tim viĆĄi ĆĄto su vaĆŸniji podaci na računaru, a pogotovo ako će računar biti\n"
+"direktno izloĆŸen Internetu. Većim nivoom sigurnosti obično gubite na\n"
+"jednostavnosti koriĆĄtenja.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"Ako ne znate ĆĄta izabrati, zadrĆŸite ponuđenu opciju."
-#: ../../standalone/draksound:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No Sound Card detected!"
-msgstr "Nije izabrana zvučna kartica!"
+msgid "Load from floppy"
+msgstr "Učitaj sa diskete"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "%s BootSplash (%s) preview"
-msgstr "%s BootSplash (%s) pregled"
+msgid "The following printer was auto-detected. "
+msgstr "Sljedeći ơtampač je prepoznat automatski."
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Generating preview ..."
-msgstr "GeneriĆĄem pregled..."
+msgid "Boot Floppy"
+msgstr "Boot disketa"
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You must choose an image file first!"
-msgstr "Morate izabrati image datoteku!"
+msgid "Norwegian"
+msgstr "NorveĆĄka"
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "ProgressBar color selection"
-msgstr "Izbor boje trake napretka"
+msgid "Searching for new scanners ..."
+msgstr "TraĆŸim nove skenere ..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
-msgstr "Ova tema joĆĄ nema bootsplash u %s !"
+msgid "Apache World Wide Web Server"
+msgstr "Apache World Wide Web Server"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "stepping of the cpu (sub model (generation) number)"
+msgstr "Stepping procesora (broj submodela / generacije)"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "saving Bootsplash theme..."
-msgstr "snimam Bootsplash temu..."
+msgid "select path to restore (instead of /)"
+msgstr "izaberite stazu za vraćanje (umjesto / )"
#: ../../standalone/draksplash:1
#, c-format
-msgid "choose image file"
-msgstr "izaberite image datoteku"
+msgid "Configure bootsplash picture"
+msgstr "Podesite bootsplash sliku"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "choose image"
-msgstr "izaberite image"
+msgid "China"
+msgstr "Kina"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configure bootsplash picture"
-msgstr "Podesite bootsplash sliku"
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr "(Provjerite da li su svi ơtampači spojeni i upaljeni).\n"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Make kernel message quiet by default"
-msgstr "Kernel poruke podrazumijevano tihe"
+msgid "Georgia"
+msgstr "Gruzija"
-#: ../../standalone/draksplash:1
+#: ../../standalone/printerdrake:1
#, c-format
-msgid "Display logo on Console"
-msgstr "PrikaĆŸi logo na konzoli"
+msgid "Reading data of installed printers..."
+msgstr "Čitam podatke instaliranih ơtampača..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose color"
-msgstr "Izaberite boju"
+msgid " Erase Now "
+msgstr " ObriĆĄi odmah "
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Save theme"
-msgstr "Snimi temu"
+msgid "server"
+msgstr "server"
-#: ../../standalone/draksplash:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Preview"
-msgstr "Pregled"
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "Ubacite FAT formatiranu disketu u jedinicu %s"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "the color of the progress bar"
-msgstr "boja progresne trake"
+msgid "yes means the processor has an arithmetic coprocessor"
+msgstr "da znači da procesor ima aritmetički koprocesor"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "the height of the progress bar"
-msgstr "visina progresne trake"
+msgid "Please Wait... Applying the configuration"
+msgstr "Molimo sačekajte... Primjenjujem konfiguraciju"
-#: ../../standalone/draksplash:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "the width of the progress bar"
-msgstr "ĆĄirina progresne trake"
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Dobro doĆĄli u GRUB izbornik operativnog sistema!"
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-"koordinate progresne trake y\n"
-"tj. njenog lijevog ugla"
+msgid "Grub"
+msgstr "Grub"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-"koordinate progresne trake x\n"
-"tj. njenog lijevog ugla"
+msgid "SCSI controllers"
+msgstr "SCSI kontroleri"
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "text box height"
-msgstr "visina tekst polja"
+msgid " on LPD server \"%s\", printer \"%s\""
+msgstr "na LPD serveru \"%s\", ơtampač \"%s\""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
#, c-format
-msgid "text width"
-msgstr "ĆĄirina teksta"
+msgid "Choosing a display manager"
+msgstr "Izbor display managera"
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"y koordinata tekst polja\n"
-"u broju znakova"
+msgid "Zeroconf Host name"
+msgstr "Zeroconf Ime računara"
-#: ../../standalone/draksplash:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"x koordinata tekst polja\n"
-"u broju znakova"
+msgid "IP address should be in format 1.2.3.4"
+msgstr "IP adresa treba biti u formatu 1.2.3.4"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Browse"
-msgstr "Pregledaj"
+msgid "Ecuador"
+msgstr "Ekvador"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Theme name"
-msgstr "Naziv teme"
+msgid "Add an item"
+msgstr "Dodaj stavku"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "final resolution"
-msgstr "krajnja rezolucija"
+msgid "The printers on this machine are available to other computers"
+msgstr "Ơtampači na ovom računaru su dostupni drugim računarima"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "first step creation"
-msgstr "kreiranje prvog koraka"
+msgid "I can't find needed image file `%s'."
+msgstr "Ne mogu pronaći potrebnu image datoteku '%s'"
-#: ../../standalone/draksplash:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr ""
-"za dovrĆĄavanje podeĆĄavanja potreban je paket 'ImageMagick'.\n"
-"Kliknite na \"U redu\" da instalirate 'ImageMagick' ili \"Odustani\" za izlaz"
+"Nije otkrivena zvučna kartica. Probajte \"harddrake\" poslije instalacije"
-#: ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
msgstr ""
-"Na vaơem računaru nije detektovana TV kartica. Molim provjerite da li je "
-"ispravno priključena Video/TV kartica koja je podrĆŸana pod Linuxom.\n"
-"\n"
-"\n"
-"MoĆŸete posjetiti naĆĄu bazu hardvera na:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"Zadan je neispravan port: %s.\n"
+"Odgovarajući format je \"port/tcp\" ili \"port/udp\", \n"
+"gdje je \"port\" cijeli broj između 1 i 65535."
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "No TV Card detected!"
-msgstr "Nije detektovana TV kartica!"
+msgid "Shell"
+msgstr "Shell"
-#: ../../standalone/drakxtv:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "Sada moĆŸete pokrenuti xawtv (pod X Window sistemom!) !\n"
+msgid "PCI"
+msgstr "PCI"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Have a nice day!"
-msgstr "Have a nice day!"
+msgid "Sao Tome and Principe"
+msgstr "Sao Tome i Principe"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "XawTV isn't installed!"
-msgstr "XawTV nije instaliran!"
+msgid "Can't login using username %s (bad password?)"
+msgstr "Ne mogu se prijaviti koristeći korisničko ime %s (pogreơna ơifa?)"
-#: ../../standalone/drakxtv:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "DoĆĄlo je do greĆĄke kod pretrage TV kanala"
+msgid "Azerbaidjani (latin)"
+msgstr "AzerbejdĆŸanska (latinica)"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Scanning for TV channels"
-msgstr "TraĆŸim TV kanale"
+msgid "Package not installed"
+msgstr "Paket nije instaliran"
-#: ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Scanning for TV channels in progress ..."
-msgstr "Pretraga TV kanala je u toku ..."
+msgid "Become a MandrakeExpert"
+msgstr "Postanite MandrakeExpert"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Area:"
-msgstr "Oblast :"
+msgid "American Samoa"
+msgstr "Američka Samoa"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "TV norm:"
-msgstr "TV standard :"
+msgid "Protocol"
+msgstr "Protokol"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Copy fonts on your system"
+msgstr "Kopiraj fontove na sistem"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Harddrake help"
+msgstr "Harddrake pomoć"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Bogomips"
+msgstr "Bogomips"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Mandrake Terminal Server Configuration"
+msgstr "PodeĆĄavanje Mandrake Terminal servera"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Please,\n"
-"type in your tv norm and country"
+"\n"
+" DrakBackup Report Details\n"
+"\n"
+"\n"
msgstr ""
-"Molim,\n"
-"unesite vaĆĄ tv standard i drĆŸavu"
+"\n"
+" DrakBackup Detalji izvjeĆĄtaja\n"
+"\n"
+"\n"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Australian Optus cable TV"
-msgstr "Australijska Optus kablovska TV"
+msgid "Restore all backups"
+msgstr "Vrati sve backupe"
-#: ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Newzealand"
-msgstr "Novi Zeland"
+msgid "if set to yes, check open ports."
+msgstr "ako je postavljeno na da, provjerava otvorene portove."
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "France [SECAM]"
-msgstr "Francuska [SECAM]"
+msgid "This may take a moment to erase the media."
+msgstr "Potrebno je par trenutaka da se obriĆĄe medij."
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "East Europe"
-msgstr "Istočna Evropa"
+msgid "You can't select/unselect this package"
+msgstr "Ne moĆŸete izabrati/isključiti ovaj paket"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "West Europe"
-msgstr "Zapadna Evropa"
+msgid "Warning"
+msgstr "Upozorenje"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "China (broadcast)"
-msgstr "Kina (broadcast)"
+msgid ""
+"\n"
+"- Other Files:\n"
+msgstr ""
+"\n"
+"- ostale datoteke:\n"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Japan (cable)"
-msgstr "Japan (kablovska)"
+msgid "Remote host name"
+msgstr "Ime udaljenog računara"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Japan (broadcast)"
-msgstr "Japan (broadcast)"
+msgid "deactivate now"
+msgstr "zaustavi sada"
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "Canada (cable)"
-msgstr "Kanada (kablovska)"
+msgid "access to X programs"
+msgstr "pristup X programima"
-#: ../../standalone/drakxtv:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "USA (cable-hrc)"
-msgstr "USA (cable-hrc)"
+msgid "Computing the size of the Windows partition"
+msgstr "Izračunavam veličinu Windows particije"
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#: ../../standalone/drakxtv:1
#, c-format
-msgid "USA (cable)"
-msgstr "USA (kablovska)"
+msgid "Italy"
+msgstr "Italija"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "USA (broadcast)"
-msgstr "USA (broadcast)"
+msgid "Name of printer"
+msgstr "Naziv ơtampača"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"XawTV isn't installed!\n"
-"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
-msgstr ""
-"XawTV nije instaliran!\n"
-"\n"
-"\n"
-"Ako imate TV karticu ali je DrakX nije prepoznao (ni bttv ni saa7134 modul "
-"se ne\n"
-"nalaze u \"/etc/modules\") niti je instalirao XawTV, molim poĆĄaljite "
-"rezultate naredbe\n"
-"\"lspcidrake -v -f\" na \"install\\@mandrakesoft.com\" sa naslovom "
-"\"undetected\n"
-"TV card\".\n"
-"\n"
-"\n"
-"MoĆŸete instalirati XawTV kucajući \"urpmi xawtv\" na konzoli kao root."
+msgid "disable"
+msgstr "isključi"
-#: ../../standalone/harddrake2:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "primary"
-msgstr "primarni"
+msgid "error unmounting %s: %s"
+msgstr "greĆĄka u demontiranju %s: %s"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "secondary"
-msgstr "sekundarni"
+msgid "Do it!"
+msgstr "Uradi!"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Cayman Islands"
+msgstr "Kajmanska ostrva"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "%s not responding"
+msgstr "%s ne odgovara"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Select model manually"
+msgstr "Izaberite model ručno"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Format"
+msgstr "Formatiraj"
+
+#: ../../network/adsl.pm:1
#, c-format
msgid ""
-"Click on a device in the left tree in order to display its information here."
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
msgstr ""
-"Kliknite na uređaj u lijevom drvetu kako biste prikazali njegove informacije."
+"Najčeơći način za konekciju sa adsl-om je pppoe.\n"
+"Neke konekcije koriste pptp, a vrlo rijetke koriste dhcp.\n"
+"Ako ne znate, izaberite 'koristi pppoe'"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Unknown"
-msgstr "Nepoznat"
+msgid "Various"
+msgstr "Razni"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "unknown"
-msgstr "nepoznat"
+msgid "Zip"
+msgstr "Zip"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Running \"%s\" ..."
-msgstr "IzvrĆĄavam \"%s\" ..."
+msgid ""
+"\n"
+"\n"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
+msgstr ""
+"\n"
+"\n"
+"Printerdrake nije mogao odrediti model vaơeg %s ơtampača. Molim izaberite "
+"odgovarajući model na listi."
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Run config tool"
-msgstr "Pokreni alat za podeĆĄavanje"
+msgid ""
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
+msgstr ""
+"\n"
+"Označite ơtampače koje ćete prebacivati i kliknite na \n"
+"\"Prebaci\"."
-#: ../../standalone/harddrake2:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Configure module"
-msgstr "Podesi modul"
+msgid "PDQ"
+msgstr "PDQ"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Information"
-msgstr "Informacije"
+msgid "Albanian"
+msgstr "Albanska"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Detected hardware"
-msgstr "Detektovani hardver"
+msgid "Lithuania"
+msgstr "Litvanija"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "Harddrake2 version "
-msgstr "Harddrake2 verzija "
+msgid "Compact"
+msgstr "Kompaktno"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detection in progress"
-msgstr "Detekcija u toku"
+msgid "Detected model: %s %s"
+msgstr "Detektovani model: %s %s"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Author:"
-msgstr "Autor:"
+msgid "MandrakeSoft has selected the best software for you"
+msgstr "MandrakeSoft je izabrao najbolji softver za vas"
#: ../../standalone/harddrake2:1
-#, c-format
+#, fuzzy, c-format
msgid ""
"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
msgstr ""
"Ovo je HardDrake, Mandrake-ov alat za podeĆĄavanje hardvera.\n"
"Verzija:"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "About Harddrake"
-msgstr "O Harddrake-u"
+msgid "Local files"
+msgstr "Lokalne datoteke"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "/_About..."
-msgstr "/_O programu..."
+msgid "maybe"
+msgstr "moĆŸda"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "/_Report Bug"
-msgstr "/_Prijavi greĆĄku"
+msgid "Panama"
+msgstr "Panama"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
msgstr ""
-"Nakon ơto izaberete uređaj, moći ćete vidjeti informacije o uređaju u "
-"poljima u desnom okviru (\"Informacije\")"
+"Izgleda da vaơa grafička kartica ima TV-OUT konektor.\n"
+"On se moĆŸe podesiti da radi koristeći frame-buffer.\n"
+"\n"
+"Za ovo je potrebno da uključite grafičku karticu u TV prije nego ơto upalite "
+"računar.\n"
+"Zatim u meniju bootloadera izaberite opciju \"TVout\"\n"
+"\n"
+"Imate li ovu mogućnost?"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Select a device !"
-msgstr "Izaberite uređaj !"
+msgid "Monitor"
+msgstr "Monitor"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Description of the fields:\n"
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
"\n"
msgstr ""
-"Opis polja:\n"
+"Upravo ćete podesiti ơtampanje na Windows račun zaơtićen ơifrom. Zbog "
+"propusta u arhitekturi Samba klijentskog softvera, ĆĄifra je stavljena u "
+"običnom tekstu u komandnu liniju Samba klijenta prilikom slanja zadatka "
+"ơtampe Windows serveru. Stoga je moguće da drugi korisnici ovog istog "
+"računara prikaĆŸu ĆĄifru na ekranu koristeći komandu kao ĆĄto je \"ps auxwww"
+"\".\n"
+"\n"
+"Preporučujemo koriơtenje jedne od sljedećih alternativa (u svakom slučaju "
+"pobrinite se da samo računari na vaĆĄoj lokalnoj mreĆŸi imaju pristup Windows "
+"serveru, na primjer koristeći firewall):\n"
+"\n"
+"Koristite račun bez ơifre na Windows serveru, kao ơto je \"GUEST\" račun ili "
+"poseban račun posvećen ơtampanju. Nemojte ukloniti zaơtitu ơifrom sa vaơeg "
+"ličnog računa ili administratorskog računa.\n"
+"\n"
+"Podesite vaơ Windows server tako da je ơtampač dostupan pod LPD protokolom. "
+"Zatim podesite ơtampanje na ovom računaru uz konekciju tipa \"%s\" u "
+"Printerdrake-u.\n"
"\n"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Harddrake help"
-msgstr "Harddrake pomoć"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "/_Fields description"
-msgstr "/_Opis polja"
-
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#, c-format
-msgid "/_Help"
-msgstr "/_Pomoć"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "/_Quit"
-msgstr "/_Izlaz"
-
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "/Automatski prepoznaj _jazz uređaje"
+msgid "65 thousand colors (16 bits)"
+msgstr "65 hiljada boja (16 bita)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/Autodetect _modems"
-msgstr "/Automatski prepoznaj _modeme"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
+msgstr ""
+"\n"
+"- spasi na hard disku u direktoriju: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "/Autodetect _printers"
-msgstr "/Automatski prepoznaj ơtam_pače"
+msgid "Size: %d KB\n"
+msgstr "Veličina: %d KB\n"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "/_Options"
-msgstr "/_Opcije"
+msgid "Remove fonts on your system"
+msgstr "PobriĆĄi fontove sa mog sistema"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "the vendor name of the processor"
-msgstr "naziv proizvođača procesora"
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
+msgstr ""
+"Upozorenje, mreĆŸni adapter (%s) je već podeĆĄen.\n"
+"\n"
+"Da li ĆŸelite automatsko ponovno podeĆĄavanje?\n"
+"\n"
+"To moĆŸete obaviti ručno, ali morate znati ĆĄta radite."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "the vendor name of the device"
-msgstr "naziv proizvođača uređaja"
+msgid "Graphical interface at startup"
+msgstr "Grafički interfejs pri pokretanju"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "Vrsta sabirnice na koju je spojen miĆĄ"
+msgid "Please enter the directory to save:"
+msgstr "Molimo unesite direktorij za spasiti:"
#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
-msgstr "Stepping procesora (broj submodela / generacije)"
+#, fuzzy, c-format
+msgid "format of floppies supported by the drive"
+msgstr "Format disketa koje podrĆŸava jedinica"
-#: ../../standalone/harddrake2:1
+#: ../../raid.pm:1
#, c-format
-msgid "Model stepping"
-msgstr "Model stepping"
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "Nema dovoljno particija za RAID nivo %d\n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "the number of the processor"
-msgstr "broj procesora"
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
+msgstr ""
+"Sljedeli ơtampači su podeơeni. Kliknite dva puta na neki od njih za izmjenu "
+"postavki; ako ga ĆŸelite učiniti podrazumjevanim ĆĄtampačem; ili da biste "
+"vidjeli informacije o njemu."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Processor ID"
-msgstr "ID procesora"
+msgid "Connected"
+msgstr "Konektovan"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "network printer port"
-msgstr "port mreĆŸnog ĆĄtampača"
+msgid "USB printer \\#%s"
+msgstr "USB ơtampač \\#%s"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "the name of the CPU"
-msgstr "naziv procesora"
+msgid "Macedonian"
+msgstr "Makedonska"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Name"
-msgstr "Ime"
+msgid "Bridges and system controllers"
+msgstr "Mostovi (bridges) i sistemski kontroleri"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "the number of buttons the mouse has"
-msgstr "broj dugmadi koje ima miĆĄ"
+msgid "/File/_Save"
+msgstr "/Datoteka/_Sačuvaj"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Number of buttons"
-msgstr "Broj dugmadi"
+msgid "Mali"
+msgstr "Mali"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Official vendor name of the cpu"
-msgstr "Zvanično ime proizvođača procesora"
+msgid "No details"
+msgstr "Nema detalja"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Model name"
-msgstr "Naziv modela"
+msgid "very nice"
+msgstr "vrlo fino"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
-msgstr "Generacija procesora (npr: 8 za PentiumIII, ...)"
+msgid "Preview"
+msgstr "Pregled"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Model"
-msgstr "Model"
+msgid "Remote Control"
+msgstr "Udaljena kontrola"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "hard disk model"
-msgstr "model hard diska"
+msgid "Please select media for backup..."
+msgstr "Molim izaberite medij za backup..."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "class of hardware device"
-msgstr "klasa hardverskog uređaja"
+msgid "XFree86 server: %s\n"
+msgstr "XFree86 server: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Media class"
-msgstr "Klasa medija"
+msgid "Allow Thin Clients"
+msgstr "Omogući thin klijente"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Sub generation of the cpu"
-msgstr "Podgeneracija procesora"
+msgid "Georgian (\"Russian\" layout)"
+msgstr "Gruzijska (\"ruski\" izgled)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Level"
-msgstr "Nivo"
+msgid "/_Options"
+msgstr "/_Opcije"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Format of floppies supported by the drive"
-msgstr "Format disketa koje podrĆŸava jedinica"
+msgid "Your printer model"
+msgstr "Model vaơeg ơtampača"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "Floppy format"
-msgstr "Format diskete"
+msgid ""
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
+msgstr ""
+"\n"
+"\n"
+"(PAĆœNJA! Vi koristite XFS za vaĆĄu root particiju,\n"
+"pravljenje boot diskete na 1.44 Mb disketi vjerovatno neće\n"
+"raditi, poĆĄto XFS traĆŸi veoma velik drajver)."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
-msgstr "Neki rani i486DX-100 chipovi "
+"\n"
+"- Delete hard drive tar files after backup.\n"
+msgstr ""
+"\n"
+"- ObriĆĄi tar datoteke sa diska nakon backupa.\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Halt bug"
-msgstr "Halt bug"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
+msgstr ""
+"Nije pronađena nijedna CD ili DVD slika, molim kopirajte instalacioni "
+"program i rpm datoteke."
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
-"Rani Pentium procesori imaju bug koji izaziva smrzavanje sistema prilikom "
-"dekodiranja F00F bytecode-a"
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "Mandrake viĆĄenamjenski alat za podeĆĄavanje"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "F00f bug"
-msgstr "F00F bug"
+msgid "Save"
+msgstr "Spasi"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr "da znači da aritmetički koprocesor ima priključen exception vector"
+msgid "The %s is unsupported"
+msgstr "%s nije podrĆŸan"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr "Da li FPU ima IRQ vektor"
+msgid "Load the drivers for your usb devices."
+msgstr "Pokreće drajvere za vaơe USB uređaje."
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr "da znači da procesor ima aritmetički koprocesor"
+msgid "Disk"
+msgstr "Disk"
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Is FPU present"
-msgstr "Da li postoji FPU"
+msgid "Enter a printer device URI"
+msgstr "Unesite URI uređaja ơtampača"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
msgstr ""
-"Rani Intel Pentium procesori imaju bug u numeričkom koprocesoru koji ne "
-"postiĆŸe potrebnu preciznost prilikom izvrĆĄavanja dijeljenja sa tekućim "
-"zarezom (FDIV)"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Fdiv bug"
-msgstr "Fdiv bug"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr "CPU flagovi koje je prijavio kernel"
+"Uspjeh MandrakeSofta je baziran na principima Slobodnog softvera. VaĆĄ novi "
+"operativni sistem je rezultat zajedničkog rada Linux zajednice ơirom svijeta."
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Flags"
-msgstr "Flagovi"
+msgid "Israel"
+msgstr "Izrael"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr "modul Linux kernela koji upravlja uređajem"
+msgid "French Guiana"
+msgstr "Francuska Gvajana"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Module"
-msgstr "Modul"
+msgid "default:LTR"
+msgstr "default:LTR"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr "novo dinamičko ime uređaja koje generiơe kernelov devfs"
+msgid "add a rule"
+msgstr "dodaj pravilo"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New devfs device"
-msgstr "Novi devfs uređaj"
+msgid "A command line must be entered!"
+msgstr "Trebate unijeti komandnu liniju!"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "old static device name used in dev package"
-msgstr "staro statičko ime uređaja koje koristi dev paket"
+msgid "Select user manually"
+msgstr "Ručno izaberite korisnika"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Old device file"
-msgstr "Stara datoteka uređaja"
+msgid "Transfer printer configuration"
+msgstr "Premjeơtanje konfiguracije ơtamapča"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This field describes the device"
-msgstr "Ovo polje opisuje uređaj"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "Da li ĆŸelite omogućiti ĆĄtampanje na gore navedenim ĆĄtampačima?\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
msgstr ""
-"Frekvencija CPUa u MHz (Megaherc je jedinica koja se moĆŸe pribliĆŸno "
-"usporediti sa brojem instrukcija koje CPU izvrĆĄava u sekundi)"
+"Da bi ovo radilo sa W2K PDCom, vjerovatno će biti potrebno da admin izvrơi:\n"
+" C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add\n"
+"i restartuje server. Takođe će vam trebati korisničko ime i ơifra "
+"administratora domena da biste pridruĆŸili računar Windows(tm) domenu.\n"
+"Ako mreĆŸa joĆĄ nije aktivirana, DrakX će pokuĆĄati pristupanje domenu tek "
+"nakon ĆĄto prođete kroz korak podeĆĄavanja mreĆŸe.\n"
+"Ako ovo podeĆĄavanje iz nekog razloga ne uspije i prijava na domen ne bude "
+"izvrơena, izvrơite naredbu 'smbpasswd -j DOMAIN -U USER%%PASSWORD' koristeći "
+"vaơu Windows(tm) domenu, kao i administratorovo korisničko ime i ơifru nakon "
+"pokretanja sistema.\n"
+"Naredba 'wbinfo -t' će provjeriti da li su vaơi podaci ispravni."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Frequency (MHz)"
-msgstr "Frekvencija (MHz)"
+msgid "%s (Port %s)"
+msgstr "%s (Port %s)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
-msgstr "Nivo informacija koje se mogu dobiti cpuid instrukcijom"
+msgid "Use network connection to backup"
+msgstr "Koristi mreĆŸnu konekciju za backup"
-#: ../../standalone/harddrake2:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Cpuid level"
-msgstr "Nivo cpuid-a"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"you are not supposed to know them all by heart.\n"
+"\n"
+"If you are performing a standard installation from a CD-ROM, you will first\n"
+"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
+"the CD labels and highlight the boxes corresponding to the CDs you have\n"
+"available for installation. Click \"OK\" when you are ready to continue.\n"
+"\n"
+"Packages are sorted in groups corresponding to a particular use of your\n"
+"machine. The groups themselves are sorted into four sections:\n"
+"\n"
+" * \"Workstation\": if you plan to use your machine as a workstation,\n"
+"select one or more of the corresponding groups;\n"
+"\n"
+" * \"Development\": if the machine is to be used for programming, choose "
+"the\n"
+"desired group(s);\n"
+"\n"
+" * \"Server\": if your machine is intended to be a server, you will be able\n"
+"to select which of the most common services you wish to install on your\n"
+"machine;\n"
+"\n"
+" * \"Graphical Environment\": finally, this is where you will choose your\n"
+"preferred graphical environment. At least one must be selected if you want\n"
+"to have a graphical workstation!\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you deselect all groups when performing a regular\n"
+"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"With X\": install the fewer packages possible to have a working\n"
+"graphical desktop;\n"
+"\n"
+" * \"With basic documentation\" Installs the base system plus basic\n"
+"utilities and their documentation. This installation is suitable for\n"
+"setting up a server.\n"
+"\n"
+" * \"Truly minimal install\": will install the strict minimum necessary to\n"
+"get a working Linux system, in command line only. This installation is\n"
+"about 65Mb large.\n"
+"\n"
+"You can check the \"Individual package selection\" box, which is useful if\n"
+"you are familiar with the packages being offered or if you want to have\n"
+"total control over what will be installed.\n"
+"\n"
+"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
+"groups to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
-msgstr "Familija CPUa (npr: 6 za i686 generaciju)"
+msgid "Accept user"
+msgstr "Prihvati korisnika"
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, c-format
-msgid "Cpuid family"
-msgstr "Cpuid familija"
+msgid "Server"
+msgstr "Server"
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr "Da li ovaj CPU ima Cyrix 6x86 Coma bug"
+msgid "Bad choice, try again\n"
+msgstr "PogreĆĄan izbor, pokuĆĄajte ponovo\n"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Coma bug"
-msgstr "Coma bug"
+msgid "Heard and McDonald Islands"
+msgstr "Heard ostrvo i McDonaldova ostrva"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr "posebne mogućnosti drajvera (mogućnost prĆŸenja i/ili podrĆĄka za DVD)"
+msgid "No alternative driver"
+msgstr "Nema alternativnog drajvera"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Drive capacity"
-msgstr "Kapacitet uređaja"
+msgid "Toggle to expert mode"
+msgstr "Prebaci u ekspertni mod"
-#: ../../standalone/harddrake2:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Size of the (second level) cpu cache"
-msgstr "Veličina CPU keơa (drugog nivoa)"
+msgid "(on this machine)"
+msgstr "(na ovom računaru)"
-#: ../../standalone/harddrake2:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Cache size"
-msgstr "Veličina cache-a"
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "Gateway adresa treba biti u formatu 1.2.3.4"
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
#, c-format
msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+"\"%s\" based winmodem detected, do you want to install needed software ?"
msgstr ""
-"- pci devices: ovo daje PCI slot, uređaj i funkciju ove kartice\n"
-"- eide devices: uređaj moĆŸe biti master ili slave\n"
-"- scsi devices: SCSI id-ovi za: bus i device"
+"Otkrio sam winmodem baziran na \"%s\" chipsetu, ĆŸelite li instalirati "
+"odgovarajući software ?"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Location on the bus"
-msgstr "Lokacija na sabirnici"
+msgid "Looking at packages already installed..."
+msgstr "TraĆŸim već instalirane pakete..."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+msgid "Use Differential Backups"
msgstr ""
-"- PCI i USB uređaji: ovo će izlistati PCI/USB id-ove za; vendor, device, "
-"subvendor i subdevice"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Bus identification"
-msgstr "Identifikacija sabirnice (busa)"
+msgid "Driver"
+msgstr "Drajver"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
msgstr ""
-"Linux kernel mora izvrơiti proračunsku petlju prilikom boot-a kako bi "
-"inicijalizirao tajmer. Rezultat rada te petlje se prikazuje u vidu "
-"bogomipsa, kao jedan neprecizan pokazatelj brzine CPUa."
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Bogomips"
-msgstr "Bogomips"
+"Linuxconf će ponekad obaviti raznolike zadatke tokom boota\n"
+"kako bi se odrĆŸala sistemska konfiguracija."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "EIDE/SCSI channel"
+msgid "Printer on remote lpd server"
+msgstr "Ơtampač na udaljenom lpd serveru"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Channel"
-msgstr "Kanal"
+msgid ""
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
+msgstr ""
+"Prije instaliranja fontova, provjerite da li imate dozvole da ih koristite i "
+"instalirate na va[em sistemu.\n"
+"\n"
+"-MoĆŸete instalirati fontove koristeći uobičajen način. U rijetkim "
+"slučajevima, neispravni fontovi mogu zaglaviti vaơ X Server."
-#: ../../standalone/harddrake2:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
msgstr ""
-"ovo je fizička sabirnica na koju je uređaj priključen (npr: PCI, USB, ...)"
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second before your\n"
+"default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
-#: ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Bus"
-msgstr "Sabirnica"
+msgid "No mouse"
+msgstr "Bez miĆĄa"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "spisak alternativnih drajvera za ovu zvučnu karticu"
+msgid "Germany"
+msgstr "Njemačka"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Alternative drivers"
-msgstr "Alternativni drajveri"
+msgid "Austria"
+msgstr "Austrija"
-#: ../../standalone/keyboarddrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Ćœelite li da BackSpace vrati Delete u konzoli?"
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr ""
+"Pokrenite \"sndconfig\" poslije instalacije kako biste podesili vaơu zvučnu "
+"karticu"
-#: ../../standalone/keyboarddrake:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Molimo izaberite izgled vaĆĄe tastature."
+msgid "Collapse Tree"
+msgstr "Smanji stablo"
-#: ../../standalone/livedrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Ne mogu da pokrenem live upgrade !!!\n"
+msgid "Auto Install Configurator"
+msgstr "PodeĆĄavanje auto instalacije"
-#: ../../standalone/livedrake:1
+#: ../../steps.pm:1
+#, c-format
+msgid "Configure networking"
+msgstr "PodeĆĄavanje mreĆŸe"
+
+#: ../../any.pm:1
#, c-format
+msgid "Where do you want to install the bootloader?"
+msgstr "Gdje ĆŸelite smjestiti bootloader?"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
msgstr ""
-"Molimo ubacite Instalacioni CD u vaơ CD-ROM uređaj i pritisnite Ok kad ste "
-"spremni.\n"
-"Ako ga nemate, pritisnite Odustani da bi se izbjegao live upgrade."
+"Vaơ izbor preferiranog jezika će se odraziti na jezik dokumentacije,\n"
+"instalacione procedure i generalno sistema. Najprije izaberite oblast u\n"
+"kojoj se nalazite, a zatim jezik kojim govorite.\n"
+"\n"
+"Klikanjem na dugme \"Napredno\" moĆŸete izabrati druge jezike koje\n"
+"ĆŸelite instalirati na vaĆĄu radnu stanicu, time instalirajući sistemsku\n"
+"dokumentaciju i aplikacije za svaki od izabranih jezika. Na primjet, ako\n"
+"će vaơ računar koristiti osobe iz ơpanije, izaberite Engleski kao osnovni\n"
+"jezik na listi, a Ć panski u oblasti Napredno.\n"
+"\n"
+"Obratite paĆŸnju da niste ograničeni na samo jedan dodatni jezik. MoĆŸete\n"
+"ih izabrati nekoliko ili čak ih instalirati sve klikom na polje \"Svi jezici"
+"\".\n"
+"Vaơ izbor podrơke za neki jezik označava da će biti instaliran prijevod,\n"
+"fontovi, pravila za provjeru pravopisa itd. za taj jezik. Pored toga, "
+"opcija\n"
+"\"Koristi Unicode\" će prisiliti upotrebu Unicode-a (UTF-8) na cijelom\n"
+"sistemu. No, obratite paĆŸnju da je ovo eksperimentalna mogućnost. Ako\n"
+"izaberete nekoliko jezika koji zahtijevaju različito kodiranje, Unicode će\n"
+"svejedno biti instaliran.\n"
+"\n"
+"Da prebacujete između raznih jezika instaliranih na vaĆĄem sistemu, moĆŸete\n"
+"pokrenuti kao \"root\" naredbu \"/usr/sbin/localedrake\", čime mijenjate\n"
+"jezik koji koristi čitav sistem. Izvrơavanjem te naredbe kao običan "
+"korisnik\n"
+"mijenjate jezičke postavke samo za tog konkretnog korisnika."
-#: ../../standalone/livedrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Change Cd-Rom"
-msgstr "Promijenite CD-ROM"
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr "Ova verzija Mandrake Linuxa ne podrĆŸava %s,"
-#: ../../standalone/localedrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr "Izmjena je napravljena, ali da bi stupila na snagu morate se odjaviti"
+msgid "DHCP client"
+msgstr "DHCP klijent"
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Save as.."
-msgstr "Sačuvaj kao..."
+msgid "Restoring from file %s failed: %s"
+msgstr "Povratak iz datoteke %s nije uspio: %s"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please enter your email address below "
-msgstr "Molimo unesite vaĆĄu email adresu ispod"
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech Mouse (serijski, stari C7 tip)"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "alert configuration"
-msgstr "postavka upozorenja"
+msgid "Are you sure that you want to set up printing on this machine?\n"
+msgstr "Sigurno ĆŸelite podesiti ĆĄtampanje na ovom računaru?\n"
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-"Primićete upozorenje ako je opterećenje (system load) veće od ove vrijednosti"
+msgid "New devfs device"
+msgstr "Novi devfs uređaj"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "load setting"
-msgstr "postavka opterećenja"
+msgid "ERROR: Cannot spawn %s."
+msgstr "GREĆ KA: Ne mogu pokrenuti %s."
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr "Primićete obavjeơtenje ako neki od izabranih servisa prestane raditi"
+msgid "Boot Style Configuration"
+msgstr "Konfiguracija stila boota"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Automatic time synchronization"
+msgstr "Automatska sinhronizacija vremena (koristeći NTP)"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "service setting"
-msgstr "postavke servisa"
+msgid "Backup files not found at %s."
+msgstr "Backup datoteke nisu pronađene na %s."
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Xinetd Service"
-msgstr "Xinetd servis"
+msgid "Thank you for choosing Mandrake Linux 9.1"
+msgstr "Hvala vam ĆĄto ste odabrali Mandrake Linux 9.1"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Webmin Service"
-msgstr "Webmin servis"
+msgid "Armenian (phonetic)"
+msgstr "Armenska (fonetska)"
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "SSH Server"
-msgstr "SSH server"
+msgid "Card model:"
+msgstr "Model kartice:"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Samba Server"
-msgstr "Samba server"
+msgid "Thin Client"
+msgstr "Thin klijenti"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Postfix Mail Server"
-msgstr "Postfix mail server"
+msgid "Start Server"
+msgstr "Pokreni server"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ftp Server"
-msgstr "FTP server"
+msgid "Turkmenistan"
+msgstr "Turkmenistan"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Domain Name Resolver"
-msgstr "Domain Name Resolver"
+msgid "All remote machines"
+msgstr "Svi udaljeni računari"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "Apache World Wide Web Server"
+msgid "Install themes"
+msgstr "Instaliraj teme"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
msgstr ""
-"Dobro doĆĄli u aplikaciju za podeĆĄavanje maila.\n"
-"\n"
-"Ovdje moĆŸete podesiti sistem obavjeĆĄtavanja.\n"
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "Mail alert configuration"
-msgstr "PodeĆĄavanje Mail obavijesti"
+msgid "Espanol"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mail alert"
-msgstr "Mail obavijest"
+msgid "Preparing installation"
+msgstr "Pripremam instalaciju"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "molim sačekajte, parsiram datoteku: %s"
+msgid "Edit selected host/network"
+msgstr "Izmijeni izabrani računar/mreĆŸu"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Content of the file"
-msgstr "SadrĆŸaj datoteke"
+msgid "Add User -->"
+msgstr "Dodaj korisnika -->"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Calendar"
-msgstr "Kalendar"
+msgid "Nauru"
+msgstr "Nauru"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Choose file"
-msgstr "Izaberi datoteku"
+msgid "True Type fonts installation"
+msgstr "Instalacija True Type fontova"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "but not matching"
-msgstr "but not matching"
+msgid "Auto-detect printers connected directly to the local network"
+msgstr "Automatski prepoznaj ĆĄtampače spojene direktno na lokalnu mreĆŸu"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "matching"
-msgstr "matching"
+msgid "LAN configuration"
+msgstr "PodeĆĄavanje LANa"
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Settings"
-msgstr "PodeĆĄavanja"
+msgid "hard disk model"
+msgstr "model hard diska"
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "A tool to monitor your logs"
-msgstr "Alat za pregled vaĆĄih logova"
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "Ne moĆŸete koristiti LVM logički volumen za tačku montiranja %s"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "search"
-msgstr "pretraĆŸivanje"
+msgid "Get Windows Fonts"
+msgstr "Preuzmi fontove iz Windowsa"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Mandrake Tools Explanation"
-msgstr "ObjaĆĄnjenja Mandrake alata"
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Syslog"
-msgstr "Syslog"
+msgid "Iranian"
+msgstr "Iranska"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Messages"
-msgstr "Poruke"
+msgid "Croatia"
+msgstr "Hrvatska"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "User"
-msgstr "Korisnik"
+msgid "Gateway:"
+msgstr "Gateway:"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Help/_About..."
-msgstr "/Pomoć/_O programu..."
+msgid "Add server"
+msgstr "Dodaj server"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Options/Test"
-msgstr "/Opcije/Test"
+msgid "Remote printer name"
+msgstr "Ime udaljenog ơtampača"
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "/File/-"
-msgstr "/Datoteka/-"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together in order to highly reduce hacking risks."
+msgstr ""
+"MandrakeSoft je dizajnirao ekskluzivne alate koji rezultiraju do sada "
+"najsigurnijom verzijom Linuxa: Draksec, alat za upravljanje sistemskom "
+"sigurnoơću, kao i moćan firewall su udruĆŸeni kako bi drastičnosmanjili rizik "
+"od provale u sistem."
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "/File/Save _As"
-msgstr "/_Datoteka/Sačuvaj K_ao"
+msgid "Device: "
+msgstr "Uređaj: "
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, c-format
-msgid "<control>S"
-msgstr "<control>S"
+msgid "Printerdrake"
+msgstr "Printerdrake"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "/File/_Save"
-msgstr "/Datoteka/_Sačuvaj"
+msgid "License agreement"
+msgstr "Licencni ugovor"
-#: ../../standalone/logdrake:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "<control>O"
-msgstr "<control>O"
+msgid "System Options"
+msgstr "Sistemske opcije"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/File/_Open"
-msgstr "/Datoteka/_Otvori"
+msgid "Please enter the directory where backups are stored"
+msgstr "Molim unesite direktorij gdje su smjeĆĄteni backupi"
-#: ../../standalone/logdrake:1
+#: ../../security/level.pm:1
#, c-format
-msgid "<control>N"
-msgstr "<control>N"
+msgid "Please choose the desired security level"
+msgstr "Molim izaberite nivo sigurnosti"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "/File/_New"
-msgstr "/Datoteka/_Nova"
+msgid "This host is already in the list, it cannot be added again.\n"
+msgstr "Ovaj računar je već na listi, ne moĆŸete ga ponovo dodati.\n"
-#: ../../standalone/logdrake:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Show only for the selected day"
-msgstr "PrikaĆŸi samo za izabrani dan"
+msgid ", USB printer"
+msgstr ", USB ơtampač"
-#: ../../standalone/mousedrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Emulate third button?"
-msgstr "Emuliraj treće dugme?"
+msgid "Choose the applications that will support the fonts:"
+msgstr "Izaberite aplikacije koje će podrĆŸavati fontove :"
-#: ../../standalone/mousedrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please choose your mouse type."
-msgstr "Molimo izaberite vrstu vaĆĄeg miĆĄa."
+msgid "Configure X"
+msgstr "PodeĆĄavanje X"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Connect %s"
-msgstr "Konektuj se na %s"
+msgid "Turkish (traditional \"F\" model)"
+msgstr "Turska (tradicionalni \"F\" model)"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Disconnect %s"
-msgstr "Prekini konekciju na %s"
+msgid "Congratulations!"
+msgstr "Čestitamo!"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Upozorenje, otkrivena je druga Internet konekcija, moĆŸda preko vaĆĄe mreĆŸe"
+msgid "Use owner id for execution"
+msgstr "Koristi id vlasnika za izvrĆĄavanje"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "received"
-msgstr "primljeno"
+msgid "Down"
+msgstr "Dolje"
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "transmitted"
-msgstr "poslano"
+msgid "Raw printer (No driver)"
+msgstr "Sirovo ĆĄtampanje (Bez drajvera)"
-#: ../../standalone/net_monitor:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "received: "
-msgstr "primljeno:"
+msgid "Install rpm"
+msgstr "Instaliraj RPM"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "sent: "
-msgstr "poslano:"
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
+msgstr ""
+"Za ĆĄtampanje datoteke sa komandne linije (terminalski prozor) moĆŸete "
+"koristiti ili komandu \"%s <datoteka>\" ili grafički alat za ơtampu: \"xpp "
+"<datoteka>\" ili \"kprinter <datoteka>\". Grafički alati vam omogućuju da "
+"jednostavno odaberete ơtampač i izmjenite podeơenja opcija.\n"
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Local measure"
-msgstr "Lokalne mjere"
+msgid "Time remaining "
+msgstr "Preostalo vremena "
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "average"
-msgstr "prosjek"
+msgid "UK keyboard"
+msgstr "UK tastatura"
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Color configuration"
-msgstr "PodeĆĄavanje boje"
+msgid "Unmount"
+msgstr "Demontiraj"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
-"Konekcija nije uspjela.\n"
-"Provjerite konfiguraciju u Mandrake Kontrolnom centru."
+msgid "Uninstall Fonts"
+msgstr "Deinstaliraj fontove"
-#: ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Connection complete."
-msgstr "Konekcija zavrĆĄena."
+msgid "Microsoft Explorer"
+msgstr "Microsoft Explorer"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Disconnection from the Internet complete."
-msgstr "Prekid veze sa Internetom zavrĆĄen."
+msgid "German (no dead keys)"
+msgstr "Njemačka (bez mrtvih tipki)"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disconnection from the Internet failed."
-msgstr "Prekid veze sa Internetom nije uspio."
+msgid "Transferring %s..."
+msgstr "Prebacujem %s ..."
-#: ../../standalone/net_monitor:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Connecting to the Internet "
-msgstr "Spajam se na Internet"
+msgid "32 thousand colors (15 bits)"
+msgstr "32 hiljada boja (15 bita)"
-#: ../../standalone/net_monitor:1
+#: ../../any.pm:1
#, c-format
-msgid "Disconnecting from the Internet "
-msgstr "Prekidam vezu na Internet"
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
+msgstr ""
+"MoĆŸete eksportovati koristeći NFS ili Sambu. Molim izaberite koji ĆŸelite "
+"koristiti."
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Molim sačekajte, probavam vaơu konekciju..."
+msgid "Reboot"
+msgstr "Restartuj"
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logs"
-msgstr "Dnevnici"
+msgid "Gambia"
+msgstr "Gambija"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Connection Time: "
-msgstr "Vrijeme konekcije: "
+msgid "Mandrake Control Center"
+msgstr "Mandrake Kontrolni centar"
-#: ../../standalone/net_monitor:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Receiving Speed:"
-msgstr "Brzina prijema:"
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
+msgstr ""
+"MoĆŸete unijeti raze portove. \n"
+"Primjeri ispravnih unosa su: 139/tcp 139/udp.\n"
+"Pogledajte datoteku /etc/services za viĆĄe informacija."
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid "Sending Speed:"
-msgstr "Brzina slanja:"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
+msgstr ""
+"Monitor\n"
+"\n"
+" Instalacioni program obično moĆŸe prepoznati i podesiti monitor koji\n"
+"je povezan na vaĆĄ računar. Ako se ovo ne desi, moĆŸete odabrati neki\n"
+"monitor sa ove liste."
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Statistics"
-msgstr "Statistika"
+msgid "\t-Tape \n"
+msgstr "\t-Traka \n"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakhelp:1
#, c-format
-msgid "Profile "
-msgstr "Profil"
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
+msgstr ""
+"Nemate nijedan browser instaliran na vaĆĄem sistemu. Molim instalirajte jedan "
+"ako ĆŸelite pristupiti sistemu pomoći"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Network Monitoring"
-msgstr "Nadzor mreĆŸe"
+msgid "Remember this password"
+msgstr "Zapamti ovu ĆĄifru"
-#: ../../standalone/printerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Reading data of installed printers..."
-msgstr "Čitam podatke instaliranih ơtampača..."
+msgid "Internet Connection Sharing is now enabled."
+msgstr "Dijeljenje Internet konekcije je sada uključeno."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Name/IP address of host:"
-msgstr "Ime/IP adresa računara:"
+msgid "\t-Network by SSH.\n"
+msgstr "\t-MreĆŸu preko SSH.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr "Ovaj računar je već na listi, ne moĆŸete ga ponovo dodati.\n"
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
+msgstr ""
+"Ako je ĆŸeljeni ĆĄtampač automatski prepoznat, jednostavno ga izaberite sa "
+"liste i dodajte korisničko ime, ơifru i/ili radnu grupu ako je to potrebno."
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Scannerdrake"
-msgstr "Scannerdrake"
+msgid "Use the free space on the Windows partition"
+msgstr "Koristi slobodan prostor na Windows particiji"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Morate unijeti ime računara ili IP.\n"
+msgid "%s found on %s, configure it automatically?"
+msgstr "%s je pronađen na %s, da ga podesim automatski?"
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
-msgstr "Izaberite računar kojem treba omogućiti pristup lokalnim skenerima:"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
-#: ../../standalone/scannerdrake:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Sharing of local scanners"
-msgstr "Dijeljenje lokalnih skenera"
+msgid "XFree86 driver: %s\n"
+msgstr "XFree86 drajver: %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This machine"
-msgstr "Na ovom računaru"
+msgid "This host/network is already in the list, it cannot be added again.\n"
+msgstr "Ovaj računar/mreĆŸa je već na listi, ne moĆŸete ga ponovo dodati.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Remove selected host"
-msgstr "Ukloni izabrani računar"
+msgid ""
+"\n"
+" DrakBackup Report \n"
+"\n"
+msgstr ""
+"\n"
+" DrakBackup IzvjeĆĄtaj \n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Edit selected host"
-msgstr "Izmijeni izabrani računar"
+msgid "Choose the packages you want to install"
+msgstr "Izaberite pakete koje ĆŸelite instalirati"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add host"
-msgstr "Dodaj računar"
+msgid "Papua New Guinea"
+msgstr "Papua Nova Gvineja"
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr "Ovo su računari sa koji treba koristiti skenere:"
+msgid "Serbian (cyrillic)"
+msgstr "Srpska (ćirilica)"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Usage of remote scanners"
-msgstr "Upotreba udaljenih skenera"
+msgid "Make kernel message quiet by default"
+msgstr "Kernel poruke podrazumijevano tihe"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "All remote machines"
-msgstr "Svi udaljeni računari"
+msgid ""
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
+msgstr ""
+"Da li ĆŸelite da podesite ovaj ĆĄtampač (\"%s\")\n"
+"kao podrazumjevani ơtampač?"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
-msgstr "Ovo su računari kojima treba dozvoliti koriơtenje lokalnog skenera:"
+msgid "The DHCP end range"
+msgstr "Kraj DHCP raspona"
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Use the scanners on hosts: "
-msgstr "Koristi skenere na računaru:"
+msgid "Creating bootdisk..."
+msgstr "Pravim boot disketu..."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Use scanners on remote computers"
-msgstr "Koristi skenere na udaljenim računarima"
+msgid "Wait please, testing your connection..."
+msgstr "Molim sačekajte, probavam vaơu konekciju..."
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Dijeljenje skenera za računare:"
+msgid "Bringing down the network"
+msgstr "Zaustavljam mreĆŸu"
-#: ../../standalone/scannerdrake:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr "Skeneri na ovom računari su dostupni drugim računarima"
+msgid "Login ID"
+msgstr "Login ID"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
msgstr ""
-"Ovdje takođe trebate odlučiti da li ovaj računar treba koristiti skenere na "
-"udaljenim računarima."
+"NFS je popularan protokol za dijeljenje datoteka preko TCP/IP mreĆŸa.\n"
+"Ovaj servis omogućuje NFS funkcionalnost zaključavanja datoteka."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
-msgstr ""
-"Ovdje moĆŸete izabrati da li skeneri spojeni na ovaj računar trebaju biti "
-"dostupni udaljenim računarima i kojim računarima."
+msgid "DHCP Client"
+msgstr "DHCP klijent"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Re-generating list of configured scanners ..."
-msgstr "Regeneriram listu podeĆĄenih skenera ..."
+msgid "dismiss"
+msgstr "otkaĆŸi"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for new scanners ..."
-msgstr "TraĆŸim nove skenere ..."
+msgid "Printing/Scanning on \"%s\""
+msgstr "Ć tampam/skeniram na \"%s\""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Searching for configured scanners ..."
-msgstr "TraĆŸim podeĆĄene skenere ..."
+msgid "omit raid modules"
+msgstr "izostavi raid module"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
-msgid "Scanner sharing"
-msgstr "Dijeljenje skenera"
+msgid ""
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
+msgstr ""
+"lpd je demon za ĆĄtampu koji je potreban da bi lpr sistem ĆĄtampe radio "
+"ispravno.\n"
+"To je u osnovi server koji dodjeljuje zadatke ơtampe ơtampaču/ima."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Add a scanner manually"
-msgstr "Ručno dodaj skener"
+msgid "Internet Connection Configuration"
+msgstr "PodeĆĄavanje Internet konekcije"
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Search for new scanners"
-msgstr "TraĆŸenje novih skenera"
+msgid "comma separated numbers"
+msgstr "brojevi razdvojeni zarezom"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr "Nisam pronaĆĄao nijedan skener na vaĆĄem sistemu.\n"
+msgid ""
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
+msgstr ""
+"Nakon ơto izaberete uređaj, moći ćete vidjeti informacije o uređaju u "
+"poljima u desnom okviru (\"Informacije\")"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule up one level"
+msgstr "Pomjeri izabrano pravilo za jedan nivo gore"
#: ../../standalone/scannerdrake:1
#, c-format
@@ -19067,373 +19134,343 @@ msgstr ""
"%s\n"
"je dostupan na vaĆĄem sistemu.\n"
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr ""
-"Sljedeći skeneri\n"
-"\n"
-"%s\n"
-"su dostupni na vaĆĄem sistemu.\n"
-
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"VaĆĄ %s je podeĆĄen.\n"
-"Sada moĆŸete skenirati dokumente koristeći \"XSane\" koji se nalazi u meniju "
-"Aplikacije/Multimedija/Grafika."
-
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "choose device"
-msgstr "izaberite uređaj"
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "Da li ĆŸelite da uklonite ĆĄtampač \"%s\"?"
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr "Molim izaberite uređaj gdje je priključen vaơ %s"
+msgid "I can't find any room for installing"
+msgstr "Ne mogu naći dovoljno prostora za instalaciju"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for scanners ..."
-msgstr "TraĆŸim skenere ..."
+msgid "Default printer"
+msgstr "Podrazumjevani ơtampač"
-#: ../../standalone/scannerdrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Auto-detect available ports"
-msgstr "Auto prepoznavaj dostupne portove"
+msgid ""
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
+msgstr ""
+"Podesili ste nekoliko načina za konekciju na Internet.\n"
+"Izaberite jedan od njih koji ćete koristiti.\n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr "(Napomena: Paralelni portovi ne mogu biti automatski istraĆŸeni)"
+msgid "Modify RAID"
+msgstr "Modificiraj RAID"
-#: ../../standalone/scannerdrake:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
msgstr ""
-"%s se mora podesiti iz printerdrake-a.\n"
-"MoĆŸete pokrenuti printerdrake iz Mandrake Kontrolnog centra u odjeljku "
-"Hardware."
+"Otkrio sam neku ISDN PCI karticu, ali ne znam tip. Molimo izaberite neku PCI "
+"karticu na idućem ekranu."
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "The %s is unsupported"
-msgstr "%s nije podrĆŸan"
+msgid "Add user"
+msgstr "Dodaj korisnika"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr "Ova verzija Scannerdrake programa ne poznaje %s."
+msgid "RAID-disks %s\n"
+msgstr "RAID-diskovi %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
-msgstr "Ova verzija Mandrake Linuxa ne podrĆŸava %s,"
+msgid "Liberia"
+msgstr "Liberija"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Port: %s"
-msgstr "Port: %s"
+msgid ""
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
+msgstr ""
+"Molim unesite naziv interfejsa spojenog na Internet.\n"
+"\n"
+"Primjeri:\n"
+"\t\tppp+ za modemsku ili DSL konekciju, \n"
+"\t\teth0, ili eth1 za mreĆŸnu konekciju, \n"
+"\t\tippp+ za isdn konekciju.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid ", "
-msgstr ", "
+msgid "Choose your keyboard"
+msgstr "Izaberite vaĆĄu tastaturu"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Detected model: %s"
-msgstr "Detektovan model: %s"
+msgid "Format partitions"
+msgstr "Formatiranje particija"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " ("
-msgstr " ("
+msgid "Automatic correction of CUPS configuration"
+msgstr "Automatska ispravka konfiguracije CUPSa"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Select a scanner model"
-msgstr "Izaberite model skenera"
+msgid "Running \"%s\" ..."
+msgstr "IzvrĆĄavam \"%s\" ..."
-#: ../../standalone/scannerdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr "%s nije u bazi skenera, ĆŸelite li ga ručno podesiti?"
+msgid "enable radio support"
+msgstr "uključi radio podrơku"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "%s je pronađen na %s, da ga podesim automatski?"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Hardware probing in progress"
-msgstr "Hardversko probanje u toku"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices were added:\n"
-msgstr "Dodani su neki uređaji:\n"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "Uklonjeni su neki uređaji u \"%s\" klasi hardvera:\n"
+msgid "Scanner sharing to hosts: "
+msgstr "Dijeljenje skenera za računare:"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
-msgstr ""
-"Uspjeh MandrakeSofta je baziran na principima Slobodnog softvera. VaĆĄ novi "
-"operativni sistem je rezultat zajedničkog rada Linux zajednice ơirom svijeta."
+msgid "Loopback file name: %s"
+msgstr "Naziv loopback datoteke: %s"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Welcome to the Open Source world."
-msgstr "Dobro doĆĄli u svijet otvorenog izvornog koda."
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "Molim izaberite ĆĄtampač kojem ĆŸelite slati zadatke ĆĄtampe."
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr "Hvala vam ĆĄto ste odabrali Mandrake Linux 9.1"
+msgid "Do not transfer printers"
+msgstr "Nemoj prebacivati ơtampače"
-#: ../../share/advertising/02-community.pl:1
-#, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
-msgstr ""
-"Podijelite vaĆĄe znanje i pomozite izgradnju Linux softvera, pridruĆŸite se "
-"diskusijskim grupama na naĆĄim \"Community\" stranicama."
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Delay before booting the default image"
+msgstr "Čekanje prije bootanja default image-a"
-#: ../../share/advertising/02-community.pl:1
-#, c-format
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+" DUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
msgstr ""
-"Ćœelite li saznati viĆĄe i doprinijeti Open Source zajednici? Uključite se u "
-"svijet Slobodnog softvera!"
-
-#: ../../share/advertising/02-community.pl:1
-#, c-format
-msgid "Build the future of Linux!"
-msgstr "Izgradite budućnost Linuxa!"
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+"\tDUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Hvala:\n"
+" - pfm2afm: \n"
+"\t autor: Ken Borgendale:\n"
+"\t Konvertuje Windows .pfm datoteke u .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t autor: James Macnicol: \n"
+"\t GeneriĆĄe datoteke fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t autor: Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Konvertuje ttf font datoteke u afm i pfb fontove\n"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
-msgstr ""
-"Mandrake Linux 9.1 vam omogućuje da potjerate vaơ multimedijalni računar do "
-"krajnjih granica! Koristite najnoviji softver za sluĆĄanje muzike i audio "
-"datoteka, mijenjajte i organizujte vaĆĄe slike i fotografije, gledajte TV i "
-"video-snimke i mnogo drugog"
+msgid "Please check for multisession CD"
+msgstr "Molim uključite ako koristite multisesijski CD"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
-msgstr ""
-"Surfajte koristeći Mozillu ili Konqueror, čitajte vaơu poơtu sa Evolution "
-"ili KMail, pravite vaĆĄe dokumente sa OpenOffice.org."
+msgid "user"
+msgstr "korisnik"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr "MandrakeSoft je izabrao najbolji softver za vas"
+msgid "Use Hard Disk to backup"
+msgstr "Koristi hard disk za backup"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
-"Mandrake Linux 9.1 vam pruĆŸa Mandrake Kontrolni centar, moćan alata koji "
-"potpuno prilagođuje vaơ računar namjeni koju ste odredili za njega. Podesite "
-"i prilagodite elemente kao ơto je nivo sigurnosti,periferni uređaji (ekran, "
-"miĆĄ, tastatura...), Internet konekciju i mnoge druge stvari!"
+msgid "Configure"
+msgstr "Podesi"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "Mandrake viĆĄenamjenski alat za podeĆĄavanje"
+msgid "Scannerdrake"
+msgstr "Scannerdrake"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"Prilagodite savrơeno svoj računar vaơim potrebama pomoću 11 dosupnih "
-"Mandrake Linux korisničkih okolina koje se mogu potpuno prilagoditi: KDE "
-"3.1, GNOME 2.2, Window Maker, ..."
+"Upozorenje, otkrivena je druga Internet konekcija, moĆŸda preko vaĆĄe mreĆŸe"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A customizable environment"
-msgstr "Prilagodljiva okolina"
+msgid "Backup Users"
+msgstr "Backup korisnika"
-#: ../../share/advertising/06-development.pl:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
msgstr ""
-"Pisanje i izmjena programa u raznim jezicima kao ĆĄto su Perl, Python, C i C+"
-"+ nikad nije bilo lakơe, zahvaljujući GNU gcc 3 i najboljim Open Source "
-"razvojnim okolinama."
-
-#: ../../share/advertising/06-development.pl:1
-#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr "Mandrake Linux 9.1: vrhunska razvojna platforma"
+"Molimo unesite naziv vaơeg računara ako ga znate.\n"
+"Naziv vaơeg računara bi trebao biti puno-kvalifikovani naziv,\n"
+"kao ĆĄto je ``mojcomp.mojlab.mojafirma.com''.\n"
+"MoĆŸete također unijeti IP adresu gateway-a ako ga imate"
-#: ../../share/advertising/07-server.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
-msgstr ""
-"Pretvorite vaơ računar u moćan Linux server: Web server, email, firewall, "
-"file i print server (itd.) su udaljeni samo nekoliko klikova miĆĄem!"
+msgid "Select Printer Spooler"
+msgstr "Izaberite spooler ơtampača"
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Turn your computer into a reliable server"
-msgstr "Pretvorite vaơ računar u pouzdan server"
+msgid "Create new theme"
+msgstr "Napravi novu temu"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
-msgstr ""
-"Čitav raspon Linux rjeơenja, kao i posebne ponude za proizvode i "
-"\"potrepĆĄtine\", dostupni su u naĆĄoj online radnji:"
+msgid "Mandrake Tools Explanation"
+msgstr "ObjaĆĄnjenja Mandrake alata"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "The official MandrakeSoft Store"
-msgstr "Oficijelna MandrakeSoft prodavnica"
+msgid "No image found"
+msgstr "Nije pronađen nijedan image"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
msgstr ""
-"Unaprijedite performanse vaơeg računara uz pomoć naơih odabranih partnera "
-"koji pruĆŸaju profesionalna rjeĆĄenja kompatibilna sa Mandrake Linuxom"
+"Neki bitni paketi nisu ispravno instalirani.\n"
+"Ili je neispravan vaơ cdrom uređaj ili vaơ cdrom medij.\n"
+"Provjerite cdrom na instaliranom računaru koristeći \"rpm -qpl Mandrake/RPMS/"
+"*.rpm\"\n"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
-msgstr "Nabavite najbolje proizvode kod strateĆĄkih partnera Mandrake Linuxa"
+msgid "Detected model: %s"
+msgstr "Detektovan model: %s"
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakedm:1
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
-"MandrakeSoft je dizajnirao ekskluzivne alate koji rezultiraju do sada "
-"najsigurnijom verzijom Linuxa: Draksec, alat za upravljanje sistemskom "
-"sigurnoơću, kao i moćan firewall su udruĆŸeni kako bi drastičnosmanjili rizik "
-"od provale u sistem."
+"X11 Display Manager vam omogućuje da se grafički\n"
+"prijavite na vaĆĄ sistem uz pokretanje X Window Systema, a podrĆŸava i\n"
+"nekoliko različitih X sesija na vaơem lokalnom računaru u isto vrijeme."
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Optimize your security by using Mandrake Linux"
-msgstr "Optimizirajte vaơu sigurnost koristeći Mandrake Linux"
+msgid "if set to yes, run the daily security checks."
+msgstr "ako je postavljeno na da, izvrĆĄava dnevne sigurnosne provjere."
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr ""
-"Ovaj proizvod je dostupan na web stranici MandrakeStore (Mandrake "
-"prodavnica)."
+msgid "Azerbaijan"
+msgstr "AzerbejdĆŸan"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
-msgstr ""
-"ZaokruĆŸite vaĆĄ sigurnosni sistem ovim vrlo jednostavnim softverom koji spaja "
-"komponente visokih performansi, kao ĆĄto je firewall, VPN server i klijent, "
-"sistem za detekciju upada (intrusion detection system) inadzor saobraćaja."
+msgid "No tape in %s!"
+msgstr "Nema trake u %s!"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr "ZaĆĄtitite vaĆĄu mreĆŸu uz Multi Network Firewall"
+msgid "Dvorak (US)"
+msgstr "Dvorak (US)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""
-"PridruĆŸite se MandrakeSoftovom support teamu i Linux zajednici na Internetu, "
-"podijelite vaĆĄe znanje i pomozite drugima i tako postanite priznat Expert na "
-"naĆĄem online tech support sajtu:"
+"ovo je fizička sabirnica na koju je uređaj priključen (npr: PCI, USB, ...)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr ""
-"Pronađite rjeơenja za vaơe probleme putem MandrakeSoft-ove online podrơke."
+msgid "How is the printer connected?"
+msgstr "Kako je ơtampač povezan na računar?"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Become a MandrakeExpert"
-msgstr "Postanite MandrakeExpert"
+msgid "Security level"
+msgstr "Nivo sigurnosti"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr ""
-"Sve incidente će pratiti jedan kvalificiran MandrakeSoft tehnički eksper."
+msgid "final resolution"
+msgstr "krajnja rezolucija"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr "Online platforma koja odgovara potrebama vaơeg preduzeća za podrơkom."
+msgid "Services"
+msgstr "Servisi"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "MandrakeExpert Corporate"
+msgid "4 MB"
+msgstr "4 MB"
#: ../../share/compssUsers:999
msgid "Office Workstation"
@@ -19448,10 +19485,6 @@ msgstr ""
"gnumeric), pdf preglednici itd."
#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Radna stanica"
-
-#: ../../share/compssUsers:999
msgid "Game station"
msgstr "Stanica za igru"
@@ -19523,10 +19556,6 @@ msgstr ""
"K Desktop Environment, osnovno grafičko okruĆŸenje sa izborom pratećih alata"
#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafičko okruĆŸenje"
-
-#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Gnome Radna stanica"
@@ -19547,10 +19576,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm, itd."
#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Programiranje"
-
-#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "C i C++ razvojne biblioteke, programi i include datoteke"
@@ -19619,29 +19644,92 @@ msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr "NFS server, SMB server, Proxy server, ssh server"
#: ../../share/compssUsers:999
-msgid "Audio station"
-msgstr "Audio stanica"
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr "Skup alata za čitanje i slanje poơte i news-a i pregledanje Weba"
-#: ../../share/compssUsers:999
-msgid "Sound playing/editing programs"
-msgstr "Programi za sluĆĄanje i editovanje zvuka"
+#~ msgid "Internet connection & configuration"
+#~ msgstr "Internet konekcija & podeĆĄavanje"
-#: ../../share/compssUsers:999
-msgid "Video station"
-msgstr "Video stanica"
+#~ msgid "Configure the connection"
+#~ msgstr "Podesi konekciju"
-#: ../../share/compssUsers:999
-msgid "Video playing programs"
-msgstr "Programi za pregled video datoteka"
+#~ msgid "Disconnect"
+#~ msgstr "Prekini konekciju"
-#: ../../share/compssUsers:999
-msgid "Graphic station"
-msgstr "Grafička stanica"
+#~ msgid "Connect"
+#~ msgstr "Konektuj me"
-#: ../../share/compssUsers:999
-msgid "Graphics programs"
-msgstr "Grafički programi"
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "MoĆŸete prekonfigurisati vaĆĄu konekciju."
-#: ../../share/compssUsers:999
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr "Skup alata za čitanje i slanje poơte i news-a i pregledanje Weba"
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "MoĆŸete se spojiti na Internet ili prekonfigurisati vaĆĄu konekciju."
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "Trenutno niste konektovani na Internet."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can disconnect or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "MoĆŸete se diskonektovati ili prekonfigurisati vaĆĄu konekciju."
+
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "Trenutno ste spojeni na Internet."
+
+#~ msgid "files sending by FTP"
+#~ msgstr "slanje datoteka putem FTPa"
+
+#~ msgid "Use incremental backup (do not replace old backups)"
+#~ msgstr "Koristi inkrementalni backup (nemoj prebrisati stare backupe)"
+
+#~ msgid "Relaunch 'lilo'"
+#~ msgstr "Pokrećem 'lilo'"
+
+#~ msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+#~ msgstr "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+
+#~ msgid "Write %s"
+#~ msgstr "ZapiĆĄi %s"
+
+#~ msgid "Copy %s to %s"
+#~ msgstr "Kopiraj %s u %s"
+
+#~ msgid "Backup %s to %s.old"
+#~ msgstr "Backupujem %s u %s.old"
+
+#~ msgid "ttf fonts conversion"
+#~ msgstr "ttf fonts konverzija"
+
+#~ msgid "Fonts conversion"
+#~ msgstr "Konverzija fontova"
+
+#~ msgid "Author:"
+#~ msgstr "Autor:"
+
+#~ msgid "Audio station"
+#~ msgstr "Audio stanica"
+
+#~ msgid "Sound playing/editing programs"
+#~ msgstr "Programi za sluĆĄanje i editovanje zvuka"
+
+#~ msgid "Video station"
+#~ msgstr "Video stanica"
+
+#~ msgid "Video playing programs"
+#~ msgstr "Programi za pregled video datoteka"
+
+#~ msgid "Graphic station"
+#~ msgstr "Grafička stanica"
+
+#~ msgid "Graphics programs"
+#~ msgstr "Grafički programi"
diff --git a/perl-install/share/po/ca.po b/perl-install/share/po/ca.po
index cf6dd30f3..93faee006 100644
--- a/perl-install/share/po/ca.po
+++ b/perl-install/share/po/ca.po
@@ -6,7 +6,7 @@
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
"PO-Revision-Date: 2002-10-10 3:34+0200\n"
"Last-Translator: Raül Cambeiro <rulet@menta.net>\n"
"Language-Team: Catalan <traddrake@softcatala.org>\n"
@@ -14,998 +14,1800 @@ msgstr ""
"Content-Type: text/plain; charset=iso-8859-1\n"
"Content-Transfer-Encoding: 8bit\n"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Scanning partitions to find mount points"
+msgstr "S'estan explorant les particions per trobar els punts de muntatge"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of suid root files."
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t\tErase=%s"
+msgstr "\t\tEsborra=%s"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "network printer port"
+msgstr ", impressora de xarxa \"%s\", port %s"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Please insert floppy disk:"
+msgstr "Si us plau, inseriu un disquet:"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "PCMCIA"
+msgstr "PCMCIA"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
+"The backup partition table has not the same size\n"
+"Still continue?"
msgstr ""
-"La compartició per usuari utilitza el grup \"fileshare\".\n"
-"Podeu utilitzar userdrake per a afegir un usuari a aquest grup."
+"La còpia de seguretat de la taula de particions no té la mateixa mida\n"
+"Voleu continuar igualment?"
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Cancel"
-msgstr "Cancel·la"
+msgid "Which username"
+msgstr "Quin nom d'usuari?"
#: ../../any.pm:1
#, c-format
-msgid "Launch userdrake"
-msgstr "Executa userdrake"
+msgid "Which type of entry do you want to add?"
+msgstr "Quin tipus d'entrada voleu afegir?"
-#: ../../any.pm:1
+#
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Restore partition table"
+msgstr "Restaura la taula de particions"
+
+#: ../../printer/cups.pm:1
+#, c-format
+msgid "On CUPS server \"%s\""
+msgstr "en servidor CUPS \"%s\""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Post-install configuration"
+msgstr "Configuració posterior a la instal·lació"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``%s'' instead"
+msgstr "Utilitzeu \"%s\" al seu lloc"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Type"
+msgstr "Tipus"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
"\n"
-"\"Custom\" permit a per-user granularity.\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
msgstr ""
-"Voleu permetre als usuaris compartir alguns dels seus directoris?\n"
-"Fer això permetrà al usuaris fer un simple clic a \"Comparteix\" en el "
-"konqueror i el nautilus.\n"
"\n"
-"\"Personalitzat\" permet configurar cada usuari per separat.\n"
+"Tampoc poden transferir-se les impressores configurades amb els fitxers PPD "
+"proporcionats pels seus fabricants o amb controladors nadius per a CUPS."
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "El paquet %s necessari falta"
+msgid "Sri Lanka"
+msgstr "Sri Lanka"
-#: ../../any.pm:1
-#, c-format
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
-"Podeu exportar utilitzant NFS o Samba. Seleccioneu quin voleu utilitzar."
+"\n"
+"Hi ha una impressora desconeguda connectada directament a l'ordinador."
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Cal instal·lar el paquet %s. Voleu instal·lar-lo?"
+msgid "Central African Republic"
+msgstr "República Centrefricana"
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Custom"
-msgstr "Personalitzada"
+msgid "Gateway device"
+msgstr "Dispositiu de la passarel·la"
-#
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Allow all users"
-msgstr "Permet tots els usuaris"
+msgid "Net Method:"
+msgstr "Mètode de xarxa:"
+
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Ethernetcard"
+msgstr "Targeta Ethernet"
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Parameters"
+msgstr "Paràmetres"
#
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "No sharing"
-msgstr "No es comparteix"
+msgid "Auto-detect"
+msgstr "Detecció automàtica"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "More"
-msgstr "Més"
+msgid "Interface:"
+msgstr "Intefície:"
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Here is the full list of available countries"
-msgstr "Aquesta és la llista completa de teclats disponibles"
+#: ../../steps.pm:1
+#, c-format
+msgid "Select installation class"
+msgstr "Tipus d'instal·lació"
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Please choose your country."
-msgstr "Si us plau, seleccioneu el tipus del vostre ratolí."
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "on CDROM"
+msgstr "en CDROM"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1
#, fuzzy, c-format
-msgid " / Region"
-msgstr "Reunion"
+msgid ""
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
+msgstr ""
+"No sembla que el sistema estigui connectat a Internet.\n"
+"Intenteu tornar a configurar la connexió."
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Country"
-msgstr "País"
+msgid ""
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
+msgstr ""
+"Connecteu la impressora a un servidor Linux i feu que els ordinadors Windows "
+"s'hi connectin com clients.\n"
+"\n"
+"Realment voleu continuar configurant aquesta impressora tal com s'està fent "
+"ara?"
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "All languages"
-msgstr "Escolliu el vostre idioma"
+#: ../../lang.pm:1
+#, c-format
+msgid "Belarus"
+msgstr "Bielorrússia"
-#: ../../any.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Use Unicode by default"
-msgstr ""
+msgid "Error writing to file %s"
+msgstr "S'ha produït un error en escriure al fitxer %s"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
msgstr ""
-"Mandrake Linux pot utilitzar múltiples idiomes. Seleccioneu\n"
-"els llenguatges que volgueu instal·lar. Estaran disponibles\n"
-"quan reinicieu el sistema, després que la instal·lació s'hagi completat."
+"L'apmd s'utilitza per monitoritzar l'estat de la bateria i registrar-lo "
+"mitjançant el registre del sistema (syslog).\n"
+"També es pot utilitzar per apagar l'ordinador quan queda poca bateria."
#
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose a language to use."
-msgstr "Si us plau, trieu un idioma per utilitzar."
+msgid "Use tape to backup"
+msgstr "Utilitza una cinta per fer la còpia de seguretat"
-#: ../../any.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Choose the window manager to run:"
-msgstr "Escolliu el gestor de finestres per executar:"
+msgid "The following packages are going to be installed"
+msgstr "Ara s'instal·laran els paquets següents"
-#: ../../any.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the default user:"
-msgstr "Escolliu l'usuari per defecte:"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Do you want to use this feature?"
-msgstr "Voleu utilitzar l'aboot?"
+msgid "CUPS configuration"
+msgstr "Configuració de CUPS"
-#
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr ""
-"Puc configurar el vostre ordinador de manera que entri automàticament amb un "
-"nom d'usuari.\n"
-"Voleu activar aquesta característica?"
+#: ../../lang.pm:1
+#, c-format
+msgid "Hong Kong"
+msgstr "Hong Kong"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Autologin"
-msgstr "Entrada automàtica"
+msgid "Not enough free space to allocate new partitions"
+msgstr "No hi ha prou espai lliure per assignar noves particions"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Icon"
-msgstr "Icona"
+msgid "Moving"
+msgstr "S'està movent"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Shell"
-msgstr "Shell"
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
+msgstr ""
+"\n"
+"Activitats del Drakbackup a través de %s:\n"
+"\n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Password (again)"
-msgstr "Contrasenya (un altre cop)"
+msgid "("
+msgstr ""
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Password"
-msgstr "Contrasenya"
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgstr ""
+"Benvingut a l'auxiliar de configuració de xarxa\n"
+"\n"
+"Ara es configurarà la connexió a Internet/xarxa.\n"
+"Si no voleu utilitzar la detecció automàtica, desactiveu el quadre de "
+"verificació.\n"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "User name"
-msgstr "Nom d'usuari"
+msgid ")"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Real name"
-msgstr "Nom real"
+msgid "Lebanon"
+msgstr "Líban"
-#: ../../any.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Accept user"
-msgstr "Accepta l'usuari"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#
+#: ../../services.pm:1
#, c-format
-msgid "Done"
-msgstr "Fet"
+msgid "Stop"
+msgstr "Atura"
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Edit selected host"
+msgstr "s'ha detectat %s"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Introduïu un usuari\n"
-"%s"
+msgid "No CD device defined!"
+msgstr "No s'ha definit cap dispositiu de CD!"
-#: ../../any.pm:1
+#
+#: ../../keyboard.pm:1
#, c-format
-msgid "Add user"
-msgstr "Afegeix un usuari"
+msgid "Bulgarian (phonetic)"
+msgstr "Búlgar (fonètic)"
-#: ../../any.pm:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "The DHCP start ip"
+msgstr "L'adreça inicial del rang del DHCP"
+
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "This user name has already been added"
-msgstr "Aquest nom d'usuari ja s'ha afegit"
+msgid "256 kB"
+msgstr "256 kB"
#: ../../any.pm:1
#, c-format
-msgid "The user name is too long"
-msgstr "El nom d'usuari és massa llarg"
+msgid "Bootloader main options"
+msgstr "Opcions principals del carregador de l'arrencada"
-#: ../../any.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
msgstr ""
-"El nom d'usuari només pot contenir lletres en minúscula, números, '-' i '_'"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Please give a user name"
-msgstr "Si us plau, introduïu un nom d'usuari"
+msgid "Tape"
+msgstr "Cinta"
-#: ../../any.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This password is too simple"
-msgstr "Aquesta contrasenya és massa senzilla"
+msgid "Scanning network..."
+msgstr "S'està escanejant la xarxa..."
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please try again"
-msgstr "Si us plau, torneu-ho a intentar"
+msgid ""
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
+msgstr ""
+"Amb aquesta opció podreu restaurar qualsevol versió\n"
+" del directori /etc."
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The passwords do not match"
-msgstr "Les contrasenyes no coincideixen"
+msgid "Malaysia"
+msgstr "Malàisia"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "(already added %s)"
-msgstr "(ja s'ha afegit %s)"
+msgid "Swiss (French layout)"
+msgstr "Suís (disposició francesa)"
-#: ../../any.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "access to compilation tools"
-msgstr "accés a les eines de compilació"
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "L'mkraid ha fallat (potser manquen les eines del RAID (raidtools)?)"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "access to network tools"
-msgstr "accés a les eines de xarxa"
+msgid "Webcam"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "access to administrative files"
-msgstr "accés a fitxers administratius"
+msgid "size of the (second level) cpu cache"
+msgstr ""
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Soundcard"
+msgstr "Targeta de so"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "allow \"su\""
-msgstr "permet \"su\""
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
+msgstr ""
+"Per imprimir un fitxer des de la línia d'ordres (finestra de terminal) useu "
+"l'ordre \"%s <fitxer>\".\n"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "access to rpm tools"
-msgstr "accés a les eines rpm"
+msgid "Level %s\n"
+msgstr "Nivell %s\n"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to X programs"
-msgstr "accés a programes X"
+msgid "Luxembourg"
+msgstr "Luxemburg"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"\n"
+" DrakBackup Daemon Report\n"
+"\n"
+"\n"
msgstr ""
-"Aquestes són les diferents entrades en el menú d'arrencada.\n"
-"Podeu afegir-ne més o canviar-ne les existents."
+"\n"
+" Informe del Dimoni DrakBackup\n"
+"\n"
+"\n"
-#: ../../any.pm:1
-#, c-format
-msgid "Other OS (windows...)"
-msgstr "Un altre SO (Windows...)"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Iran"
+msgstr "Iraq"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Un altre SO (MacOS...)"
+msgid "Bus"
+msgstr "Bus"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Un altre SO (SunOS...)"
+msgid "Iraq"
+msgstr "Iraq"
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Linux"
-msgstr "Linux"
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr ""
+"S'ha trobat un conflicte potencial d'adreça LAN en la configuració actual de "
+"%s!\n"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Quin tipus d'entrada voleu afegir?"
+msgid "Configuring..."
+msgstr "S'està configurant..."
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "This label is already used"
-msgstr "Aquesta etiqueta ja està en ús"
+msgid "The setup has already been done, and it's currently enabled."
+msgstr "La configuració ja s'ha realitzat i ara està habilitada."
-#
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "You must specify a root partition"
-msgstr "Heu d'especificar una partició arrel"
+msgid ""
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
+msgstr ""
+"Per a les targetes de TV més modernes, el mòdul bttv del nucli GNU/Linux "
+"detecta automàticament els paràmetres correctes.\n"
+"Si la vostra targeta no és detectada, podeu forçar el tipus de sintonitzador "
+"i de targeta aquí. Simplement seleccioneu els paràmetres necessaris per a la "
+"vostra targeta de TV"
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "You must specify a kernel image"
-msgstr "Heu d'especificar una imatge del nucli"
+msgid "Password (again)"
+msgstr "Contrasenya (un altre cop)"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Empty label not allowed"
-msgstr "No es permet una etiqueta buida"
+msgid "Search installed fonts"
+msgstr "Cerca les fonts instal·lades"
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Default"
-msgstr "Predeterminat"
+msgid "Venezuela"
+msgstr "Veneçuela"
-#: ../../any.pm:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "NoVideo"
-msgstr "NoVideo"
+msgid "IP address"
+msgstr "Adreça IP"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Initrd-size"
-msgstr "Initrd-size"
+msgid "Choose the sizes"
+msgstr "Escolliu les mides"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Append"
-msgstr "Afegeix"
+msgid ""
+"List of data corrupted:\n"
+"\n"
+msgstr ""
+"Llista de dades corrompudes:\n"
+"\n"
-#: ../../any.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Label"
-msgstr "Etiqueta"
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
+msgstr ""
-#: ../../any.pm:1
+#
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Unsafe"
-msgstr "No segur"
+msgid "Choose another partition"
+msgstr "Trieu una altra partició"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Table"
-msgstr "Taula"
+msgid "Current user"
+msgstr "Usuari actual"
-#: ../../any.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Root"
-msgstr "Arrel"
+msgid "Username"
+msgstr "Nom d'usuari"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Read-write"
-msgstr "Lectura-escriptura"
+msgid "Left \"Windows\" key"
+msgstr "Tecla de \"Windows\" Esquerra"
-#: ../../any.pm:1
+#
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid "dhcpd Server Configuration"
+msgstr "Configuració del servidor dhcpd"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Video mode"
-msgstr "Mode de vídeo"
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
+msgstr ""
+"Usat per al directori:\n"
+" només el propietari del directori o del fitxer en aquest directori poden "
+"suprimir-lo"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Image"
-msgstr "Imatge"
+msgid "Guyana"
+msgstr "Guyana"
-#: ../../any.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Default OS?"
-msgstr "SO per defecte?"
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr " en servidor Novell \"%s\", impressora \"%s\""
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Enable OF Boot?"
-msgstr "Voleu habilitar l'arrencada des d'OF?"
+msgid "Remove a module"
+msgstr "Elimina un mòdul"
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Enable CD Boot?"
-msgstr "Voleu habilitar l'arrencada des de CD?"
+msgid "Password"
+msgstr "Contrasenya"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Temps màxim d'arrencada del nucli"
+msgid ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
+msgstr ""
-#: ../../any.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Open Firmware Delay"
-msgstr "Demora per al firmware obert"
+msgid "Advanced Configuration"
+msgstr "Configuració avançada"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Scanning on your HP multi-function device"
+msgstr ", dispositiu multifunció"
#: ../../any.pm:1
#, c-format
-msgid "Boot device"
-msgstr "Dispositiu d'arrencada"
+msgid "Root"
+msgstr "Arrel"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Init Message"
-msgstr "Missatge d'inicialització"
+msgid "Choose an existing RAID to add to"
+msgstr "Escolliu un RAID existent al qual afegir-ho"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Bootloader to use"
-msgstr "Carregador de l'arrencada a utilitzar"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "Turc (modern, model \"Q\")"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Bootloader main options"
-msgstr "Opcions principals del carregador de l'arrencada"
+msgid "Lilo message not found"
+msgstr "No s'ha trobat el missatge de LILO"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
msgstr ""
-"L'opció \"Limita les opcions de la línia d'ordres\" no té cap utilitat sense "
-"una contrasenya"
+"Regeneració automàtica del capçal de nucli a /boot per\n"
+"/usr/include/linux/{autoconf,versió}.h"
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Give the ram size in MB"
-msgstr "Introduïu la mida de la RAM en MB"
+msgid "if needed"
+msgstr "si cal"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Enable multiple profiles"
-msgstr "Habilita perfils múltiples"
+msgid "Restore Failed..."
+msgstr "La restauració ha fallat..."
-#: ../../any.pm:1
+#
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _jazz drives"
+msgstr "Detectada automàticament"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Description:\n"
+"\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
+"\n"
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
+"\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
+"\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
+"\n"
+"\n"
+msgstr ""
+"Descripció:\n"
+"\n"
+" El Drakbackup s'usa per fer còpies de seguretat del sistema.\n"
+" Durant la configuració podeu seleccionar: \n"
+"\t- Fitxers de sistema\n"
+"\t- Fitxers d'usuari\n"
+"\t- Altres fitxers\n"
+"\to Tot el Sistema... i Altres (com les Particions de Windows)\n"
+"\n"
+" El Drakbackup us permet fer còpies de seguretat del sistema en:\n"
+"\t- Disc dur\n"
+"\t- NFS\n"
+"\t- CDROM (CDRW), DVDROM (amb arrencada automàtica, rescat i instal·lació "
+"automàtica)\n"
+"\t- FTP\n"
+"\t- Rsync\n"
+"\t- Webdav\n"
+"\t- Cinta\n"
+"\n"
+" El Drakbackup us permet restaurar el sistema a\n"
+" un directori seleccionat d'usuari.\n"
+"\n"
+" Per defecte totes les còpies de seguretat es guarden en\n"
+" el directori /var/lib/drakbackup\n"
+"\n"
+" Fitxer de Configuració:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"\n"
+"El pas de restauració:\n"
+" \n"
+" Durant el pas de restauració, el DrakBackup esborrarà \n"
+" els directoris originals i verificarà que cap de \n"
+" les còpies de seguretat no està malmesa. És recomanable que \n"
+" feu una última còpia de seguretat abans de restaurar.\n"
+"\n"
+"\n"
+
+#: ../../install_messages.pm:1
#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Mida exacta de la RAM, si cal (s'han trobat %d MB)"
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
+msgstr ""
+"Introducció\n"
+"\n"
+"D'ara endavant, hom es referirà al sistema operatiu i als diferents\n"
+"components disponibles en la distribució Mandrake Linux com als\n"
+"\"Productes de programari\". Els Productes de programari inclouen,\n"
+"però no estan restringits a, el conjunt de programes, mètodes, regles\n"
+"i documentació relativa al sistema operatiu i els diferents\n"
+"components de la distribució Mandrake Linux.\n"
+"\n"
+"\n"
+"1. Acord de llicència\n"
+"\n"
+"Si us plau, llegiu atentament aquest document. Aquest document és un\n"
+"acord de llicència entre la vostra persona i MandrakeSoft S.A., que\n"
+"s'aplica als Productes de programari. Pel fet d'instal·lar, duplicar\n"
+"o utilitzar els Productes de programari en qualsevol forma esteu\n"
+"acceptant explícitament, i expressant el vostre acord a avenir-vos a\n"
+"les clàusules i condicions d'aquesta Llicència. Si no esteu d'acord\n"
+"amb qualsevol part de la Llicència, no esteu autoritzat a instal·lar,\n"
+"duplicar o utilitzar els Productes de programari. Qualsevol intent\n"
+"d'instal·lar, duplicar o utilitzar els Productes de programari en una\n"
+"forma que no s'adapti a les clàusules i condicions d'aquesta\n"
+"Llicència, és nul i finalitzarà els vostres drets sobre la mateixa.\n"
+"En finalitzar-se la Llicència, heu de destruir immediatament totes\n"
+"les còpies dels Productes de programari.\n"
+"\n"
+"\n"
+"2. Garantia limitada\n"
+"\n"
+"Els Productes de programari i documentació adjunta es subministren\n"
+"\"tal com són\", sense cap garantia, fins al punt permés per la llei.\n"
+"MandrakeSoft S.A. no serà, sota cap circumstància, i fins al punt\n"
+"permés per la llei, responsable de cap dany especial, incidental ni\n"
+"directe (incloent, sense limitar-se a, els danys per pèrdua de\n"
+"negocis, interrupció de negocis, pèrdues financeres, multes i costes\n"
+"judicials, o qualsevol altre dany que resultin d'un judici, o\n"
+"qualsevol altre pèrdua d'importància) que resulti de l'ús o de la\n"
+"impossibilitat d'utilitzar els Productes de programari, fins i tot si\n"
+"MandrakeSoft S.A. ha estat avisat de la possibilitat que\n"
+"s'esdevinguin aquests danys.\n"
+"\n"
+"RESPONSABILITAT LIMITADA RELATIVA A LA POSSESSIÓ O UTILITZACIÓ DE PROGRAMARI "
+"PROHIBIT EN ALGUNS PAÏSOS\n"
+"\n"
+"Fins al punt permés per la llei, MandrakeSoft S.A. o els seus\n"
+"distribuïdors no seran, sota cap circumstància, responsables de cap\n"
+"dany especial, incidental ni directe (incloent, sense limitar-se a,\n"
+"els danys per pèrdua de negocis, interrupció de negocis, pèrdues\n"
+"financeres, multes i costes judicials, o qualsevol altre dany que\n"
+"resultin d'un judici, o qualsevol altre pèrdua d'importància) que\n"
+"resulti de la possessió i utilització dels components de programari o\n"
+"de la seva descàrrega des d'un dels llocs de Mandrake Linux, que\n"
+"estiguin prohibides o restringides en alguns països per les lleis\n"
+"locals. Aquesta responsabilitat limitada s'aplica, però no hi està\n"
+"restringida, als potents components criptogràfics inclosos als\n"
+"Productes de programari.\n"
+"\n"
+"\n"
+"3. la llicència GPL i llicències relacionades\n"
+"\n"
+"Els Productes de programari consisteixen en components creats per\n"
+"diferents persones o entitats. La majoria d'aquests components es\n"
+"regeixen per les clàusules i condicions de la Llicència General\n"
+"Pública de GNU, a la qual d'ara endavant hom s'hi referirà com a\n"
+"\"GPL\", o de llicències similars. la majoria d'aquestes llicències\n"
+"us permeten duplicar, adaptar o redistribuir els components que\n"
+"cobreixen. Si us plau, llegiu atentament les clàusules i condicions\n"
+"de l'acord de llicència de cada component abans d'utilitzar-lo.\n"
+"Qualsevol pregunta sobre la lllicència d'un component s'ha d'adreçar\n"
+"al seu autor i no a MandrakeSoft.\n"
+"Els programes desenvolupats per MandrakeSoft S.A. es regeixen per la\n"
+"llicència GPL.La documentació escrita per MandrakeSoft S.A. està regida per "
+"una\n"
+"llicència específica; consulteu la documentació per a més\n"
+"informació.\n"
+"\n"
+"\n"
+"4. Drets sobre la propietat intel·lectual\n"
+"\n"
+"Tots els drets sobre els components dels Productes de programari\n"
+"pertanyen als seus autors respectius i estan protegits per les lleis\n"
+"de propietat intel·lectual i de copyright aplicables als programes\n"
+"informàtics.\n"
+"MandrakeSoft S.A. es reserva els drets de modificar o adaptar els\n"
+"Productes de programari, totalment o parcialment, per tots els\n"
+"mitjans i amb totes les finalitats.\n"
+"\"Mandrake\", \"Mandrake Linux\" i els logotips associats son marques\n"
+"registrades de MandrakeSoft S.A.\n"
+"\n"
+"\n"
+"5. Lleis rectores \n"
+"\n"
+"Si qualsevol part d'aquest acord és declarat nul, il·legal o\n"
+"inaplicable per un tribunal, aquesta part s'exclourà del contracte.\n"
+"Seguiu obligat, però, per les altres seccions aplicables de\n"
+"l'acord.\n"
+"Les clàusules i condicions d'aquesta Llicència es regeixen per les\n"
+"lleis de França.\n"
+"Tots els litigis sobre les clàusules d'aquesta llicència es dirimiran\n"
+"preferiblement fora dels tribunals. Com a últim recurs, el litigi es\n"
+"portarà als tribunals competents de París, França.\n"
+"Per a qualsevol tema relacionat amb aquest document, poseu-vos en\n"
+"contacte amb MandrakeSoft S.A.\n"
-#: ../../any.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Buida /tmp en cada arrencada"
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
+msgstr ""
+"coordenada x de la cantonada superior\n"
+"esquerra de la barra de progrés"
-#: ../../any.pm:1
+#
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Current interface configuration"
+msgstr "Mostra la configuració actual de la interfície"
+
+#: ../../printer/data.pm:1
#, c-format
-msgid "Create a bootdisk"
-msgstr "Crea un disc d'arrencada"
+msgid "LPD - Line Printer Daemon"
+msgstr "LPD - Line Printer Daemon"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "restrict"
-msgstr "limita"
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
+msgstr ""
+"\n"
+"Si teniu una targeta ISA, els valors de la pantalla següent haurien de ser "
+"correctes.\n"
+"\n"
+"Si teniu una targeta PCMCIA, cal que en sapigueu l'\"irq\" i l'\"io\".\n"
-#: ../../any.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Restrict command line options"
-msgstr "Limita les opcions de la línia d'ordres"
+msgid "Do not print any test page"
+msgstr "No imprimeixis cap pàgina de prova"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Gurmukhi"
+msgstr "Gurmukhi"
#: ../../any.pm:1
#, c-format
msgid "Force No APIC"
msgstr ""
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr ""
+"Aquesta contrasenya és massa curta (ha de tenir com a mínim %d caràcters)"
+
+#: ../../standalone.pm:1
#, fuzzy, c-format
-msgid "Enable ACPI"
-msgstr "Voleu habilitar l'arrencada des de CD?"
+msgid "[keyboard]"
+msgstr "Teclat"
-#: ../../any.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Delay before booting default image"
-msgstr "Demora abans d'arrencar la imatge predeterminada"
+msgid "FTP proxy"
+msgstr "Intermediari per a FTP"
-#: ../../any.pm:1
+#
+#: ../../standalone/drakfont:1
#, c-format
-msgid "compact"
-msgstr "compacte"
+msgid "Install List"
+msgstr "Llista d'instal·lació"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Compact"
-msgstr "Compacte"
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr ""
+"Canvia el camí\n"
+"on restaurar"
-#: ../../any.pm:1
+#
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bootloader installation"
-msgstr "Instal·lació del carregador de l'arrencada"
+msgid "Show only for the selected day"
+msgstr "Mostrar-ho només per al dia seleccionat"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "First sector of boot partition"
-msgstr "Primer sector de la partició d'arrencada"
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
+"\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
+"\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Primer sector de la unitat (MBR)"
+msgid "512 kB"
+msgstr "512 kB"
-#: ../../any.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "On voleu instal·lar el carregador de l'arrencada?"
+msgid "Logs"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "LILO/grub Installation"
-msgstr "Instal·lació del LILO/grub"
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "SILO Installation"
-msgstr "Instal·lació del SILO"
+msgid "<control>N"
+msgstr "<control>N"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Skip"
-msgstr "Omet"
+msgid "What kind of card do you have?"
+msgstr "Quin tipus de targeta teniu?"
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "On Floppy"
-msgstr "Disquet d'arrencada"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>O"
+msgstr "<control>O"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Security"
+msgstr "Seguretat"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
+msgstr ""
+"També podeu emprar la interfície gràfica \"xpdq\" per configurar opcions i "
+"gestionar treballs d'impressió.\n"
+"Si esteu utilitzant KDE com a entorn gràfic per defecte, teniu un \"botó "
+"d'emergència\", una icona a l'escriptori, etiquetada amb \"ATURA la "
+"impressora!\", que atura tots el treballs d'impressió immediatament en fer-"
+"hi clic. Això és útil, per exemple, quan se us enganxa el paper en la "
+"impressora.\n"
+
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#, c-format
+msgid "<control>Q"
+msgstr "<control>Q"
+
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "First sector of the root partition"
-msgstr "Primer sector de la partició d'arrencada"
+msgid "Unknown"
+msgstr "Model desconegut"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr ""
+
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#, c-format
+msgid "Network Configuration"
+msgstr "Configuració de xarxa"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>S"
+msgstr "<control>S"
+
+#
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
msgstr ""
-"Heu decidit instal·lar el gestor de l'arrencada en una partició.\n"
-"Això implica que ja teniu un gestor d'arrencada en el disc des del qual "
-"arrenqueu (p.ex.: System Commander).\n"
-"\n"
-"En quina unitat arrenqueu?"
+"Protocol per a la resta del món\n"
+"Cap canal D (línies punt a punt)"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Creating bootdisk..."
-msgstr "S'està creant el disc d'arrencada..."
+msgid "Option %s must be a number!"
+msgstr "L'opció %s ha de ser un número!"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Inseriu un disquet a la unitat %s"
+msgid "Notice"
+msgstr "Avís"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
msgstr ""
-"Escolliu la unitat de disquet que voleu utilitzar per crear el disc "
-"d'arrencada"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Second floppy drive"
-msgstr "Segona unitat de disquet"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "First floppy drive"
-msgstr "Primera unitat de disquet"
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr ""
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
+"S'ha detectat la següent impressora. La configuració de la impressora es "
+"farà automàticament. Si la vostra impressora no ha estat correctament "
+"detectada o si preferiu personalitzar la seva configuració, habiliteu "
+"\"Configuració manual\"."
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "No hi ha cap unitat de disquet disponible"
+msgid "What type of partitioning?"
+msgstr "Quin tipus de particionament voleu?"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
+"file list sent by FTP: %s\n"
+" "
msgstr ""
-"Un disc d'arrencada personalitzat proporciona una manera d'arrencar el "
-"vostre\n"
-"sistema Linux sense dependre del carregador d'arrencada normal. Això és "
-"útil\n"
-"si no voleu instal·lar el LILO (o el grub) al sistema, o si un altre sistema "
-"operatiu\n"
-"elimina el LILO, o si el LILO no funciona amb la vostra configuració de\n"
-"maquinari. Un disc d'arrencada personalitzat també es pot utilitzar amb la\n"
-"imatge de rescat del Mandrake, facilitant molt la recuperació de fallides\n"
-"serioses del sistema. Voleu crear un disc d'arrencada per al vostre "
-"sistema?\n"
-"%s"
+"llista de fitxers enviada per FTP: %s\n"
+" "
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
+msgid "Interface"
+msgstr "Interfície"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
+"Options Description:\n"
+"\n"
+" - Backup System Files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
"\n"
+" - Backup User Files: \n"
+"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
+"\n"
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane. To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
msgstr ""
+"descripció de les opcions:\n"
+"\n"
+" - Còpia de seguretat dels fitxers de sistema:\n"
+" \n"
+"\tAquesta opció us permet fer còpies del directori /etc,\n"
+"\tque conté tots els fitxers de configuració. Tingueu\n"
+"\tcura durant el pas de restauració de no sobreescriure:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Còpia de seguretat dels fitxers d'usuari: \n"
+"\n"
+"\tAquesta opció permet seleccionar els usuaris dels quals voleu \n"
+"\tfer còpia de seguretat.\n"
+"\tPer preservar espai de disc, es recomanable que no inclogueu \n"
+"\tla memòria cau del navegador.\n"
+"\n"
+" - Còpia de seguretat d'altres fitxers: \n"
+"\n"
+"\tAquesta opció us permet afegir més dades per desar.\n"
+"\tAmb aquesta opció de còpia encara no és possible activar\n"
+"\tl'opció de còpia incremental.\t\t\n"
+" \n"
+" - Còpia de seguretat incremental:\n"
+"\n"
+"\tLa còpia incremental és l'opció més potent a l'hora de fer \n"
+"\tcòpies de seguretat. Aquesta opció us permet fer una còpia \n"
+"\tde seguretat de totes les dades la primera vegada, i \n"
+"\tnomés de les dades canviades després.\n"
+"\tMés tard, sereu capaç, durant el procés de restauració, \n"
+"\tde restaurar les dades d'una data determinada.\n"
+"\tSi no s'activa aquesta opció totes les còpies de \n"
+"\tseguretat antigues s'esborren abans de cada nova còpia. \n"
"\n"
"\n"
-"(COMPTE! Esteu utilitzant XFS per la vostra partició arrel,\n"
-"la creació d'un disquet d'arrencada amb un de 1.44 MB molt probablement "
-"fallarà,\n"
-"perquè XFS necessita una unitat molt gran)."
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
msgstr ""
-"Un disc d'arrencada personalitzat proporciona una manera d'arrencar el "
-"vostre\n"
-"sistema Linux sense dependre del carregador d'arrencada normal. Això és "
-"útil\n"
-"si no voleu instal·lar el SILO al sistema, o si un altre sistema operatiu\n"
-"elimina el SILO, o si el SILO no funciona amb la vostra configuració de\n"
-"maquinari. Un disc d'arrencada personalitzat també es pot utilitzar amb la\n"
-"imatge de rescat del Mandrake, facilitant molt la recuperació de fallides\n"
-"serioses del sistema.\n"
-"\n"
-"Si voleu crear un disc d'arrencada per al vostre sistema, inseriu un disquet "
-"a la primera unitat i premeu \"D'acord\"."
-#: ../../bootloader.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "No podeu instal·lar el carregador de l'arrencada a una partició %s\n"
+msgid "comma separated strings"
+msgstr "cadenes separades per coma"
-#: ../../bootloader.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "not enough room in /boot"
-msgstr "no hi ha prou espai a /boot"
+msgid "These are the machines from which the scanners should be used:"
+msgstr ""
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "L'entrada ressaltada arrencara automaticament en %d segons."
+msgid "Messages"
+msgstr "Missatges"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "ordres abans de l'arrencada, o 'c' per obtenir una linia d'ordres."
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr "Desconegut|CPH06X (bt878) [molts venedors]"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Premeu Retorn per arrencar el SO seleccionat, 'e' per editar les"
+msgid "POP and IMAP Server"
+msgstr "Servidor POP i IMAP"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr ""
-"Utilitzeu les tecles %c i %c per seleccionar quina entrada esta ressaltada."
+msgid "Mexico"
+msgstr "Mèxic"
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Benvingut al GRUB, el selector de sistema operatiu!"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model stepping"
+msgstr "paràmetre de càrrega"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Rwanda"
+msgstr "Rwanda"
-#: ../../bootloader.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Grub"
-msgstr "Grub"
+msgid "Do you have any %s interfaces?"
+msgstr "Teniu alguna interfície %s?"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with text menu"
-msgstr "LILO amb menú de text"
+msgid "Switzerland"
+msgstr "Suïssa"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO amb menú gràfic"
+msgid "Brunei Darussalam"
+msgstr "Brunei"
-#: ../../bootloader.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Remote lpd Printer Options"
+msgstr "Opcions de la impressora lpd remota"
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
"\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
msgstr ""
-"Benvingut al %s, el selector de sistema operatiu!\n"
+"GNU/Linux és un sistema multiusuari, i això vol dir que cada usuari pot "
+"tenir\n"
+"les seves preferències, els seus fitxers, etc. Podeu llegir la \"Guia de "
+"l'Usuari\"\n"
+"per aprendre més coses. A diferència del \"root\", que és l'administrador, \n"
+"als usuaris que afegiu aquí no se'ls permetrà modificar res tret dels seus\n"
+"fitxers i la seva configuració. Cal que tingueu com a mínim un usuari "
+"normal.\n"
+"Aquest compte és en el que hauríeu d'entrar per a un ús habitual. Tot i que "
+"és\n"
+"molt pràctic entrar en el sistema com a \"root\" cada dia, també pot ser "
+"molt\n"
+"perillós. La més petita errada podría significar que el sistema deixés de "
+"funcionar.\n"
+"Si cometeu una gran errada com a usuari normal, podeu perdre algunes dades, "
+"però no\n"
+"tot el sistema.\n"
"\n"
-"Trieu un sistema operatiu de la lista superior, o espereu\n"
-"%d segons per arrencar en el sistema operatiu predeterminat.\n"
+"Primer, heu d'introduir el vostre nom real. Per suposat, això no és "
+"necessari, ja que\n"
+"podeu introduir el que volgueu. El DrakX agafarà la primera paraula que heu "
+"entrat\n"
+"en la casella i la copiarà en el \"Nom d'usuari\". Aquest és el nom que "
+"utilitzarà\n"
+"aquest usuari per entrar en el sistema. El podeu canviar si voleu. Després "
+"cal que\n"
+"introduïu una contrasenya. Una contrasenya d'un usuari no privilegiat "
+"(habitual) \n"
+"no és tant important com la del \"root\" des del punt de vista de la "
+"seguretat, \n"
+"però no hi ha cap raó per menystenir-ho: al cap i a la fi, els vostres "
+"fitxers\n"
+"estan en joc.\n"
"\n"
+"Si cliqueu a \"Accepta l'usuari\", després en podreu afegir tants com "
+"volgueu. Afegiu\n"
+"un usuari per tothom qui hagi de fer servir l'ordinador. Quan hagueu acabat "
+"d'afegir\n"
+"tants usuaris com volgueu, seleccioneu \"Fet\".\n"
+"\n"
+"Si feu clic al botó \"Avançat\" podreu canviar l'intèrpret d'ordres (\"shell"
+"\") \n"
+"predeterminat de l'usuari seleccionat (bash per defecte).\n"
+"\n"
+"Un cop hagueu acabat d'afegir usuaris, se us proposarà triar quin usuari "
+"entrarà\n"
+"automàticament en el sistema en arrencar l'ordinador. Si us interessa "
+"aquesta \n"
+"característica (i no us importa gaire la seguretat local), trieu l'usuari i "
+"el\n"
+"gestor de finestres desitjat i feu clic a \"Sí\".\n"
+"Si no us interessa aquesta característica, pitgeu \"No\"."
-#: ../../common.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "consolehelper missing"
-msgstr "El consolehelper no hi és"
+msgid "Configure Internet Access..."
+msgstr "Configura l'accés a Internet..."
-#: ../../common.pm:1
+#
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "kdesu missing"
-msgstr "El kdesu no hi és"
+msgid "Norway"
+msgstr "Noruega"
-#: ../../common.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Les captures estaran disponibles després d'instal·lar a %s"
+msgid "Danish"
+msgstr "Danès"
-#
-#: ../../common.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "No es poden fer captures de pantalla abans de fer les particions"
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
+msgstr ""
+"Engega automàticament a l'arrencada la tecla de fixació del \n"
+"teclat numèric a la consola i sota XFree."
-#: ../../common.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "%d seconds"
-msgstr "%d segons"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+"Si us plau, introduïu la configuració IP d'aquest ordinador.\n"
+"S'ha d'introduir cada element com una adreça IP en notació decimal amb\n"
+"punts (per exemple, 1.2.3.4)."
-#: ../../common.pm:1
-#, c-format
-msgid "1 minute"
-msgstr "1 minut"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
+msgstr ""
+"La instal·lació del Mandrake Linux està repartida en diversos CD-ROM. El "
+"DrakX\n"
+"sap si un paquet seleccionat es troba a un altre CD-ROM i expulsarà el CD "
+"actual\n"
+"i us demanarà que n'inseriu un altre a mesura que ho necessiti."
-#: ../../common.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "%d minutes"
-msgstr "%d minuts"
+msgid "Processors"
+msgstr ""
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "TB"
-msgstr "TB"
+msgid "Bulgaria"
+msgstr "Bulgària"
-#: ../../common.pm:1
-#, c-format
-msgid "GB"
-msgstr "GB"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "No NIC selected!"
+msgstr "No heu seleccionat cap NIC!"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "MB"
-msgstr "MB"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr "Illes Svalbard i Jan Mayen"
-#: ../../common.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "KB"
-msgstr "kB"
+msgid ""
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
+msgstr ""
+"Hi ha hagut problemes durant la configuració.\n"
+"Proveu la connexió via net_monitor o mcc. Si la connexió no funciona "
+"correctament, torneu a executar la configuració."
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "United States"
-msgstr "Estats Units"
+msgid "partition %s is now known as %s"
+msgstr "la partició %s ara és %s"
#
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Austria"
-msgstr "Àustria"
+msgid "Backup Other files..."
+msgstr "Fes una còpia de seguretat d'altres fitxers..."
-#
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Italy"
-msgstr "Itàlia"
+msgid "SMB server IP"
+msgstr "IP del servidor SMB"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Netherlands"
-msgstr "Països Baixos"
+msgid "Congo (Kinshasa)"
+msgstr ""
-#
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sweden"
-msgstr "Suècia"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "La taula de particions de la unitat %s s'escriurà al disc!"
#
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing HPOJ package..."
+msgstr "S'estan instal·lant els paquets..."
+
+#: ../../any.pm:1
#, c-format
-msgid "Norway"
-msgstr "Noruega"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr ""
+"Un disc d'arrencada personalitzat proporciona una manera d'arrencar el "
+"vostre\n"
+"sistema Linux sense dependre del carregador d'arrencada normal. Això és "
+"útil\n"
+"si no voleu instal·lar el LILO (o el grub) al sistema, o si un altre sistema "
+"operatiu\n"
+"elimina el LILO, o si el LILO no funciona amb la vostra configuració de\n"
+"maquinari. Un disc d'arrencada personalitzat també es pot utilitzar amb la\n"
+"imatge de rescat del Mandrake, facilitant molt la recuperació de fallides\n"
+"serioses del sistema. Voleu crear un disc d'arrencada per al vostre "
+"sistema?\n"
+"%s"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ", USB printer \\#%s"
+msgstr ", impressora USB \\/*%s"
#
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Greece"
-msgstr "Grècia"
+msgid "Latvian"
+msgstr "Letó"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Germany"
-msgstr "Alemanya"
+msgid "monthly"
+msgstr "mensual"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Czech Republic"
-msgstr "República Txeca"
+msgid "Module name"
+msgstr "Nom del mòdul"
#
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Belgium"
-msgstr "Bèlgica"
+msgid "Start at boot"
+msgstr "Inicia en l'arrencada"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental Backups"
+msgstr ""
+"Usa les còpies de seguretat incrementals (no reemplacis les còpies antigues)"
+
+#: ../../any.pm:1
#, c-format
-msgid "France"
-msgstr "França"
+msgid "First sector of drive (MBR)"
+msgstr "Primer sector de la unitat (MBR)"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Costa Rica"
-msgstr "Costa Rica"
+msgid "Joystick"
+msgstr ""
-#: ../../fsedit.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "S'ha produït un error en obrir %s per escriure: %s"
+msgid "El Salvador"
+msgstr "El Salvador"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Nothing to do"
-msgstr "Res a fer"
+msgid "Use Unicode by default"
+msgstr ""
-#
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "No hi ha prou espai per a l'assignació automàtica"
+msgid "the module of the GNU/Linux kernel that handles the device"
+msgstr "el mòdul del nucli GNU/Linux que gestiona aquest dispositiu"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-"No podeu utilitzar un sistema d'arxius xifrat per al punt de muntatge %s"
+msgid "Trying to rescue partition table"
+msgstr "S'està intentant recuperar la taula de particions"
-#
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s must be an integer number!"
+msgstr "L'opció %s ha de ser un número enter!"
+
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
+"Entries you'll have to fill:\n"
+"%s"
msgstr ""
-"Necessiteu un sistema de fitxers real (ext2/ext3, reiserfs, xfs o jfs) per a "
-"aquest punt de muntatge\n"
+"Entrades que heu d'emplenar:\n"
+"%s"
-#: ../../fsedit.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Aquest directori s'ha de mantenir dins del sistema de fitxers arrel"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "No es pot iniciar l'actualització en directe!!!\n"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "No podeu utilitzar un volum lògic LVM per al punt de muntatge %s"
+msgid "Name: "
+msgstr "Nom: "
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"Heu seleccionat una partició de programari RAID com a arrel (/).\n"
-"Això no ho pot gestionar cap carregador d'arrencada sense una partició /"
-"boot.\n"
-"Per tant, assegureu-vos d'afegir una partició /boot"
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "16 million colors (24 bits)"
+msgstr "16 milions de colors (24 bits)"
-#: ../../fsedit.pm:1
+#
+#: ../../any.pm:1
#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Ja hi ha una partició amb el punt de muntatge %s\n"
+msgid "Allow all users"
+msgstr "Permet tots els usuaris"
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr ""
-"El nom de la impressora només pot constar de lletres, números i el caràcter "
-"de subratllat"
+#: ../../share/advertising/08-store.pl:1
+#, c-format
+msgid "The official MandrakeSoft Store"
+msgstr "La botiga oficial de MandrakeSoft"
-#: ../../fsedit.pm:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Els punts de muntatge han de començar amb una /"
+msgid "Resizing"
+msgstr "S'està canviant la mida"
-#: ../../fsedit.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "No podeu utilitzar el ReiserFS per a particions inferiors a 32 MB"
+msgid "Cable connection"
+msgstr "Connexió per cable"
-#: ../../fsedit.pm:1
+#
+#: ../../standalone/logdrake:1
#, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "No podeu utilitzar el JFS per a particions inferiors a 16 MB"
+msgid "User"
+msgstr "Usuari"
#: ../../fsedit.pm:1
#, c-format
@@ -1026,1273 +1828,256 @@ msgstr ""
"\n"
"Esteu d'acord en perdre totes les particions?\n"
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Error"
-msgstr "Error"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr ""
+"Fes una nova còpia de seguretat abans de restaurar (només per les còpies "
+"incrementals.)"
-#: ../../fsedit.pm:1
-#, c-format
-msgid "server"
-msgstr "servidor"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer on parallel port \\#%s"
+msgstr "Impressora en el port paral·lel \\/*%s"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Name"
+msgstr "Nom: "
+
+#: ../../raid.pm:1
#, c-format
-msgid "with /usr"
-msgstr "amb /usr"
+msgid "mkraid failed"
+msgstr "L'mkraid ha fallat"
-#: ../../fsedit.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "simple"
-msgstr "senzill"
+msgid "Button 3 Emulation"
+msgstr "Emulació del botó 3"
-#: ../../fs.pm:1
-#, fuzzy, c-format
-msgid "Enabling swap partition %s"
-msgstr "S'està formatant la partició %s"
+#
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Sending files..."
+msgstr "S'estan enviant els fitxers..."
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "error unmounting %s: %s"
-msgstr "s'ha produït un error en desmuntar %s: %s"
+msgid "Israeli (Phonetic)"
+msgstr "Israelià (fonètic)"
-#: ../../fs.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "El muntatge de la partició %s en el directori %s ha fallat"
+msgid "access to rpm tools"
+msgstr "accés a les eines rpm"
-#: ../../fs.pm:1
-#, fuzzy, c-format
-msgid "Mounting partition %s"
-msgstr "S'està formatant la partició %s"
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "edit"
+msgstr "edita"
-#: ../../fs.pm:1
-#, fuzzy, c-format
-msgid "Checking %s"
-msgstr "S'està copiant %s"
+#
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "You must choose/enter a printer/device!"
+msgstr "Heu d'escollir/introduir una impressora/dispositiu!"
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Formatting partition %s"
-msgstr "S'està formatant la partició %s"
+msgid "Permission problem accessing CD."
+msgstr "Hi ha hagut un problema de permisos en accedir al CD."
-#: ../../fs.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Creating and formatting file %s"
-msgstr "S'està creant i formatant el fitxer %s"
+msgid "Phone number"
+msgstr "Número de telèfon"
-#: ../../fs.pm:1
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr "No hi ha cap controlador conegut per a la vostra targeta de so (%s)"
+
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "No sé com formatar %s amb el tipus %s"
+msgid "Printer name, description, location"
+msgstr "Nom de la impressora, descripció, ubicació"
-#: ../../fs.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatació de %s ha fallat"
+msgid "USA (broadcast)"
+msgstr "EUA (difusió)"
-#: ../../help.pm:1
-#, fuzzy, c-format
+#
+#: ../../standalone/drakbackup:1
+#, c-format
msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
+"Please choose the\n"
+"media for backup."
msgstr ""
-"Feu clic a \"D'acord\" si voleu suprimir totes les dades i particions\n"
-"que hi ha en aquesta unitat de disc. Aneu amb compte perquè, un cop\n"
-"hagueu fet clic a \"D'acord\", no podreu recuperar cap dada ni partició\n"
-"del disc, incloent les dades de Windows.\n"
-"\n"
-"Feu clic a \"Cancel·la\" per anul·lar aquesta operació sense perdre cap "
-"dada\n"
-"ni partició d'aquest disc."
+"Si us plau, trieu el\n"
+"suport per a la còpia."
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Escolliu el disc dur que voleu buidar per instal·lar la nova partició Linux\n"
-"Mandrake. Aneu amb compte, se'n perdran totes les dades i no es podran\n"
-"recuperar!"
+msgid "Use Xinerama extension"
+msgstr "Utilitza l'extensió Xinerama"
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
-msgstr ""
+msgid "Loopback"
+msgstr "Loopback"
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
msgstr ""
+"No es pot tancar l'mkbootdisk correctament: \n"
+" %s \n"
+" %s"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"El Yaboot és un carregador d'arrencada per a maquinari NewWorld MacIntosh.\n"
-"Pot arrencar tant el GNU/Linux com el MacOS o el MacOSX, si és que els "
-"teniu\n"
-"a l'ordinador. Normalment, aquests altres sistemes operatius es detecten i\n"
-"instal·len correctament; si no és així, però, en aquesta pantalla podeu\n"
-"afegir una entrada manualment. Aneu amb compte de triar els paràmetres\n"
-"correctes.\n"
-"\n"
-"Les opcions principals del Yaboot són:\n"
-"\n"
-" * Missatge d'inicialització: un senzill missatge de text que apareix abans\n"
-"de l'indicador d'arrencada.\n"
-"\n"
-" * Dispositiu d'arrencada: indica on voleu situar la informació necessària\n"
-"per arrencar el GNU/Linux. Normalment, haureu configurat abans una partició\n"
-"bootstrap que contindrà aquesta informació.\n"
-"\n"
-" * Demora de l'Open Firmware: a diferència del LILO, amb el Yaboot hi ha\n"
-"dues demores disponibles. La primera d'elles es mesura en segons i, en "
-"aquest\n"
-"punt, podeu triar entre CD, arrencada OF, MacOS o Linux.\n"
-"\n"
-" * Temps màxim d'arrencada del nucli: aquest temps màxim és similar a la\n"
-"demora d'arrencada del LILO. Després de seleccionar el Linux tindreu aquest\n"
-"temps (en dècimes de segon) abans que se seleccioni la descripció per "
-"defecte\n"
-"del nucli.\n"
-"\n"
-" * Habilita l'arrencada des de CD: si activeu aquesta opció podreu triar\n"
-"'C' per a CD al primer indicador de l'arrencada.\n"
-"\n"
-" * Habilitar l'arrencada OF: si activeu aquesta opció podreu triar 'N' per\n"
-"Open Firmware al primer indicador de l'arrencada.\n"
-"\n"
-" * SO per defecte: podeu seleccionar amb quin SO, per defecte, s'arrencarà\n"
-"quan la demora de l'Open Firmware venci."
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "West Europe"
+msgstr "Europa de l'Oest"
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../standalone.pm:1
+#, c-format
msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
msgstr ""
-"Podeu afegir entrades addicionals per al yaboot, ja sigui per a altres\n"
-"sistemes operatius, nuclis alternatius, o per a una imatge per a arrencades\n"
-"d'emergència.\n"
-"\n"
-"Per a altres SO, l'entrada només consta d'una etiqueta i de la partició "
-"arrel.\n"
-"\n"
-"Per al Linux, hi ha unes quantes opcions possibles: \n"
-"\n"
-" * Etiqueta: és només el nom a entrar en l'indicador del yaboot per\n"
-"seleccionar aquesta opció d'arrencada.\n"
-"\n"
-" * Imatge: el nom del nucli a arrencar. Normalment, vmlinux o una\n"
-"variació de vmlinux amb una extensió.\n"
-"\n"
-" * Arrel: el dispositiu arrel o '/' per a la instal·lació del Linux.\n"
-"\n"
-" * Addició: en maquinari Apple, l'opció d'addició de nuclis s'utilitza\n"
-"força sovint per auxiliar en la inicialització de maquinari de vídeo o per\n"
-"habilitar l'emulació del botó del ratolí de teclat per als 2n i 3r botons,\n"
-"que sovint no existeixen en un ratolí Apple convencional. Alguns exemples\n"
-"d'això són:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: aquesta opció es pot utilitzar per carregar els mòduls inicials,\n"
-"abans que el dispostiu d'arrencada estigui disponible, o per carregar\n"
-"una imatge de disc RAM en una situació d'arrencada d'emergència.\n"
-"\n"
-" * Mida de l'Initrd: la mida per defecte del disc RAM sol ser de 4096 "
-"bytes.\n"
-"Si necessiteu assignar un disc RAM gran, podeu utilitzar aquesta opció.\n"
-"\n"
-" * Lectura-Escriptura: normalment, la partició arrel '/' es tracta "
-"inicialment com\n"
-"de només lectura per permetre una comprovació del sistema de fitxers abans\n"
-"que el sistema esdevingui \"viu\". Podeu substituir aquesta opció aquí.\n"
-"\n"
-" * Sense Vídeo: en cas que el maquinari de vídeo d'Apple resulti "
-"especialment\n"
-"problemàtic, podeu seleccionar aquesta opció per arrencar en mode 'no-"
-"vídeo',\n"
-"amb el suport nadiu per a frame buffer.\n"
-"\n"
-" * Per defecte: seleccioneu aquesta entrada com a selecció per defecte del\n"
-"Linux; se selecciona prement simplement Retorn a l'indicador del yaboot.\n"
-"Aquesta opció també es ressaltarà amb un '*' si premeu Tab per veure les\n"
-"seleccions d'arrencada."
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"El DrakX detectarà qualsevol dispositiu IDE en l'ordinador. Així mateix, \n"
-"intentarà trobar un o més adaptadors SCSI PCI. Si troba un adaptador SCSI,\n"
-"el DrakX instal·larà automàticament el controlador adequat.\n"
-"\n"
-"Com que la detecció de maquinari no sempre troba tots els dispositius,\n"
-"el DrakX us demanarà que confirmeu si hi ha un adaptador SCSI PCI. Feu clic\n"
-"a \"Sí\" si sabeu segur que n'hi ha un instal·lat en l'ordinador. "
-"Apareixerà\n"
-"una llista de targetes SCSI perquè n'escolliu una. Feu clic a \"No\" si no "
-"en\n"
-"teniu cap. Si no n'esteu segurs, podeu mirar la llista de maquinari\n"
-"detectat en el vostre ordinador seleccionant \"Veure informació del "
-"maquinari\"\n"
-"i fent clic a \"D'acord\". Examineu la llista de maquinari i feu clic sobre\n"
-"el botó \"D'acord\" per tornar a la pregunta sobre l'interfície SCSI.\n"
-"\n"
-"Si heu de seleccionar l'adaptador manualment, el DrakX us preguntarà si\n"
-"voleu confifurar-ne les opcions. Convé que deixeu que el DrakX comprovi\n"
-"el maquinari per inicialitzar les opcions especifiques d'algunes targetes.\n"
-"Això sol funcionar bé.\n"
-"\n"
-"Si el DrakX no pot comprovar les opcions que se li han de passar al "
-"controlador,\n"
-"us caldrà proporcionar les opcions al controlador manualment. Consulteu la\n"
-"Guia de l'usuari (capítol 3, en la secció \"Informació obtinguda del "
-"maquinari\")\n"
-"per saber com treure aquesta informació de la documentació del maquinari,\n"
-"del lloc web del fabricant (si teniu accés a Internet) o del Microsoft "
-"Windows\n"
-"(si el teniu al sistema)."
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Harddrake2 version %s"
+msgstr "Versió del Harddrake2 %s"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
-"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
-msgstr ""
-"Aquí se seleccionarà el sistema d'impressió per al vostre ordinador. Altres\n"
-"sistemes operatius us n'oferiran un, però el Mandrake Linux n'ofereix dos.\n"
-"\n"
-" * \"pdq\" que vol dir \"print, don't queue\" (imprimeix, no facis cua), és\n"
-"l'opció escollida si teniu una connexió directa amb la impressora i voleu\n"
-"evitar aquelles cues d'impressió interminables, i no teniu impressores de \n"
-"xarxa. Només funcionarà sobre xarxes molt senzilles i és bastant lent per a\n"
-"xarxes en general. Escolliu \"pdq\" si és la vostra primera incursió en GNU/"
-"Linux.\n"
-"Podeu canviar la vostra elecció després de la instal·lació executant el \n"
-"PrinterDrake des del Centre de Control Mandrake, fent clic al botó \"Expert"
-"\".\n"
-"\n"
-" * \"CUPS\" vol dir \"Common Unix Printing System\" (Sistema d'impressió "
-"comú\n"
-"de Unix), és el millor a l'hora d'imprimir a la vostra impressora local i a "
-"la\n"
-"meitat del planeta. És senzill i pot actuar com a servidor o client per a "
-"l'antic\n"
-"sistema d'impressió \"lpd\". Per tant, és compatible amb els sistemes "
-"anteriors.\n"
-"Pot fer moltes coses, però la configuració bàsica es tant senzilla com la de "
-"\"pdq\".\n"
-"Si necessiteu CUPS per emular un servidor \"lpd\", heu d'habilitar el "
-"dimoni\n"
-"\"cups-lpd\". Té una interfície gràfica per imprimir i escollir les "
-"opcions \n"
-"d'impressió."
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Copying %s"
+msgstr "S'està copiant %s"
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
-msgstr ""
+msgid "Choose color"
+msgstr "Escolliu un color"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-"Un cop configurats els paràmetres generals del carregador de l'arrencada, \n"
-"es mostrarà la llista d'opcions de càrrega que es veurà en arrencar la "
-"màquina.\n"
-"\n"
-"Si hi ha algun altre sistema operatiu instal·lat en el vostre ordinador, \n"
-"s'inclourà automàticament al menú del carregador. Aquí podeu modificar les\n"
-"entrades del menú d'arrencada. Seleccioneu una entrada i feu clic a \n"
-"\"Modifica\" per modificar-la o esborrar-la. \"Afegeix\" crea una nova "
-"entrada,\n"
-"i \"Fet\" avança cap al següent pas de la instal·lació.\n"
-"També és possible que no vulgueu permetre a ningú l'accés a aquests "
-"sistemes\n"
-"operatius. En aquest cas, podeu suprimir les entrades corresponents, però\n"
-"aleshores us caldrà un disc d'arrencada per poder-los arrencar!"
+#: ../../lang.pm:1
+#, c-format
+msgid "Dominican Republic"
+msgstr "República Dominicana"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
-msgstr ""
-"El LILO i el grub són carregadors de l'arrencada de GNU/Linux. Normalment,\n"
-"aquesta etapa és totalment automàtica. De fet, el DrakX analitza el \n"
-"sector d'arrencada i actua d'acord amb el que hi troba:\n"
-"\n"
-" * si troba un sector d'arrencada de Windows, el reemplaçarà amb un sector\n"
-"d'arrencada de grub/LILO. Per tant, sereu capaç de carregar el GNU/Linux\n"
-"o un altre sistema operatiu.\n"
-"\n"
-" * si es troba un sector d'arrencada del grub o del LILO, el reemplaçarà\n"
-"amb un de nou.\n"
-"\n"
-"Si té algun dubte, el DrakX us presentarà un diàleg amb diverses opcions:\n"
-"\n"
-" * \"Carregador de l'arrencada\": teniu tres opcions:\n"
-"\n"
-" * \"GRUB\": si preferiu el grub (menú de text).\n"
-"\n"
-" * \"LILO amb menú gràfic\": si preferiu el LILO amb una interfície\n"
-"gràfica.\n"
-"\n"
-" * \"LILO amb menú de text\": si preferiu el LILO amb el seu menú de\n"
-"text.\n"
-"\n"
-" * \"Dispositiu d'arrencada\": en la majoria de casos, no heu de canviar "
-"l'opció\n"
-"per defecte (\"/dev/hda\"), però si ho preferiu, el carregador de "
-"l'arrencada\n"
-"pot instal·lar-se en el segon disc dur (\"/dev/hdb\"), o fins i tot en un \n"
-"disquet (\"/dev/fd0\").\n"
-"\n"
-" * \"Temps d'espera abans de carregar la imatge per defecte\": quan es "
-"reinicia\n"
-"l'ordinador, aquest és el temps de què disposa l'usuari per escollir una "
-"entrada\n"
-"diferent de l'entrada per defecte en el menú d'arrencada.\n"
-"\n"
-"Teniu en compte que si escolliu no instal·lar un carregador de l'arrencada \n"
-"(seleccionant \"Cancel·la\" aquí), heu d'estar segurs que teniu alguna "
-"manera\n"
-"d'arrencar el vostre sistema Mandrake Linux! Encara més, estigueu segurs de\n"
-"saber què feu abans de canviar alguna de les opcions.\n"
-"\n"
-"Si feu clic al botó \"Avançat\" d'aquest diàleg podreu modificar algunes\n"
-"opcions avançades, reservades als usuaris experts."
+#: ../../lang.pm:1
+#, c-format
+msgid "Swaziland"
+msgstr "Swazilàndia"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
-msgstr ""
-"Aquesta és la decisió més important quant a la seguretat del vostre sistema\n"
-"GNU/Linux: heu d'introduir la contrasenya de l'usuari \"root\". El \"root\" "
-"és\n"
-"l'administrador del sistema i és l'únic autoritzat a fer actualitzacions,\n"
-"afegir usuaris, canviar la configuració del tot el sistema, etc. De fet,\n"
-"el \"root\" pot fer de tot! Per això heu d'escollir una contrasenya que "
-"sigui\n"
-"dificil d'endevinar. DrakX us avisarà si és massa fàcil. Com veieu, podeu \n"
-"optar per no introduir cap contrasenya, però no és gens prudent per una\n"
-"única raó: el fet d'arrencar GNU/Linux no fa que els vostres altres "
-"\"sistemes\n"
-"operatius\" estiguin lliures d'errors. Com que l'usuari \"root\" pot "
-"superar\n"
-"totes les limitacions i esborrar accidentalment totes les dades de "
-"qualsevol\n"
-"partició com a conseqüència d'accedir sense precaucions a les particions en "
-"si,\n"
-"és molt important que sigui difícil esdevenir \"root\".\n"
-"\n"
-"La contrasenya hauria de ser una mescla de caràcters alfanumèrics i, com a \n"
-"mínim, de 8 caràcters de longitud. No escrigueu mai la contrasenya de \"root"
-"\"\n"
-"ja que és molt fàcil comprometre el sistema si ho feu.\n"
-"\n"
-"De totes maneres, no feu la contrasenya massa llarga o complicada perquè\n"
-"heu de ser capaços de recordar-la sense gaire esforç.\n"
-"\n"
-"La contrasenya no es mostrarà per pantalla quan la teclegeu. Per tant, \n"
-"haureu d'escriure-la dues vegades per reduir la probabilitat d'errors\n"
-"en l'escriptura. Si, malauradament, feu el mateix error dues vegades, "
-"haureu\n"
-"d'usar aquesta contrasenya \"incorrecta\" el primer cop que us connecteu.\n"
-"\n"
-"En el mode Expert, se us preguntarà si us voleu connectar a un servidor\n"
-"d'autentificació, com ara NIS o LDAP.\n"
-"\n"
-"Si la vostra xarxa usa LDAP, NIS o l'autenticació de domini Windows PDC,\n"
-"seleccioneu l'opció corresponent com a autenticació. Si no ho sabeu, "
-"pregunteu\n"
-"al vostre administrador de la xarxa.\n"
-"\n"
-"Si el vostre ordinador no es connecta a cap xarxa administrada, haureu \n"
-"d'escollir \"Fitxers Locals\" per a l'autenticació."
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Set-UID"
+msgstr "Set-UID"
-#: ../../help.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Si us plau, seleccioneu el port correcte. Per exemple, el port \"COM1\" en\n"
-"Windows s'anomena \"ttyS0\" en GNU/Linux."
+msgid "Please check if you are using CDRW media"
+msgstr "Marqueu aquesta opció si feu servir un suport CDRW"
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
msgstr ""
-"El DrakX generalment detecta el nombre de botons que té el vostre ratolí. "
-"Si\n"
-"no pot, assumeix que teniu un ratolí de dos botons i el configurarà per "
-"emular\n"
-"el tercer botó. El DrakX detectarà automàticament si el ratolí és PS/2, "
-"sèrie o\n"
-"USB.\n"
-"\n"
-"Si voleu especificar un tipus diferent de ratoli seleccioneu el tipus \n"
-"apropiat de la llista.\n"
-"\n"
-"Si escolliu un ratolí diferent del ratolí per defecte, es mostrarà una "
-"pantalla\n"
-"de test. Proveu els botons i la roda per verificar que la configuració és\n"
-"correcta. Si el ratolí no funciona bé, premeu la barra espaiadora o la \n"
-"tecla de retorn per cancel·lar i triar de nou.\n"
-"\n"
-"De vegades, la roda del ratolí no es detecta automàticament. En aquest cas,\n"
-"haureu de seleccionar-ho a la llista. Assegureu-vos de triar aquell que es\n"
-"correspongui amb el port on teniu connectat el ratolí. Quan premeu \"D'acord"
-"\"\n"
-"apareixerà la imatge d'un ratolí perquè proveu tots els botons i els "
-"moviments."
+"Escolliu el disc dur que voleu buidar per instal·lar la nova partició Linux\n"
+"Mandrake. Aneu amb compte, se'n perdran totes les dades i no es podran\n"
+"recuperar!"
-#: ../../help.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
-msgstr ""
-"El primer pas és triar l'idioma que voleu.\n"
-"\n"
-"Escolliu l'idioma que vulgueu per a la instal·lació i per al sistema.\n"
-"\n"
-"Si feu clic al botó \"Avançat\" podreu seleccionar altres idiomes que "
-"vulgueu\n"
-"instal·lar a la vostra estació de treball. S'instal·laran els fitxers "
-"d'idioma\n"
-"especifics de la documentació i de les aplicacions. Per exemple, si tindreu\n"
-"usuaris anglesos a la vostra màquina, podeu triar el català com a idioma "
-"principal\n"
-"des de l'arbre i, a la secció \"Avançat\", marcar la casella \"Anglès|Regne "
-"Unit\".\n"
-"\n"
-"Cal remarcar que es poden instal·lar múltiples idiomes. Un cop hagueu "
-"seleccionat\n"
-"tots els idiomes que vulgueu , feu clic sobre el botó \"D'acord\" per "
-"continuar.\n"
-"\n"
-"Per canviar d'un idioma a un altre, podeu executar com a root l'ordre \n"
-"\"/usr/sbin/localedrake\" per canviar l'idioma de tot el sistema, o com a "
-"simple\n"
-"usuari per canviar només l'idioma per defecte d'aquest usuari."
+msgid " on parallel port \\#%s"
+msgstr " en port paral·lel \\/*%s"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
+#, c-format
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
msgstr ""
-"Normalment, el DrakX selecciona el teclat correcte (segons l'idioma que\n"
-"hagueu escollit). Tanmateix, podríeu tenir un teclat que no correspongués "
-"exactament\n"
-"al vostre idioma, per exemple: si sou un suís que parla anglès, encara "
-"voldreu\n"
-"que el teclat sigui suís. O si parleu anglès però viviu al Quebec, us "
-"podeu \n"
-"trobar en la mateixa situació. En tots dos casos, haureu de tornar a aquest "
-"pas\n"
-"de la instal·lació i seleccionar un teclat adequat de la llista.\n"
-"\n"
-"Feu clic al botó \"Més\" per veure la llista completa de teclats disponibles."
+"Utilitzeu les tecles %c i %c per seleccionar quina entrada esta ressaltada."
-#: ../../help.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
+msgid "Generic 2 Button Mouse"
+msgstr "Ratolí genèric de 2 botons"
-#: ../../help.pm:1
+#: ../../lvm.pm:1
#, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
+msgid "Remove the logical volumes first\n"
+msgstr "Elimineu primer els volums lògics\n"
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"S'ha detectat més d'una partició de Microsoft Windows en la unitat de disc.\n"
-"Si us plau, trieu quina d'elles voleu redimensionar per instal·lar el nou\n"
-"sistema operatiu Mandrake Linux.\n"
-"\n"
-"Cada partició està identificada d'aquesta manera:\n"
-"\"Nom Linux\", \"Nom Windows\" \"Capacitat\".\n"
-"\n"
-"\"Nom Linux\" es compon de: \"tipus d'unitat de disc\", \"número d'unitat "
-"de \n"
-"disc\", \"número de la partició\" (per exemple, \"hda1\").\n"
-"\n"
-"\"Tipus d'unitat de disc\" és \"hd\" si la vostre unitat de disc és IDE i \n"
-"\"sd\" si és SCSI.\n"
-"\n"
-"\"Número de la unitat de disc\" és sempre una lletra després de \"hd\" o \"sd"
-"\".\n"
-"Amb unitats de disc IDE:\n"
-"\n"
-" * \"a\" significa \"unitat de disc mestra en el controlador IDE primari\",\n"
-"\n"
-" * \"b\" significa \"unitat de disc esclava en el controlador IDE primari"
-"\",\n"
-"\n"
-" * \"c\" significa \"unitat de disc mestra en el controlador IDE secundari"
-"\",\n"
-"\n"
-" * \"d\" significa \"unitat de disc esclava en el controlador IDE secundari"
-"\".\n"
-"\n"
-"Amb les unitats de disc SCSI, una \"a\" significa \"unitat primària de disc"
-"\",\n"
-"una \"b\" significa \"unitat secundària de disc\", etc.\n"
-"\n"
-"\"Nom Windows\" és la lletra de la vostra unitat de disc sota Windows (el "
-"primer\n"
-"disc o partició s'anomena \"C:\")."
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "L'entrada ressaltada arrencara automaticament en %d segons."
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../standalone/drakboot:1
+#, c-format
msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
msgstr ""
-"Ara és quan heu de decidir quina(es) partició(ns) voleu utilitzar per\n"
-"instal·lar el sistema Mandrake Linux. Si ja s'han definit les particions\n"
-"(en una instal·lació anterior de GNU/Linux o mitjançant una altra eina de\n"
-"particionament), podeu utilitzar les particions existents. En cas contrari,\n"
-"s'han de definir particions al disc dur.\n"
-"\n"
-"Per crear particions, primer heu de seleccionar un disc dur. Podeu "
-"seleccionar\n"
-"el disc que s'ha de particionar fent clic a \"hda\" per a la primera unitat\n"
-"IDE, \"hdb\" per a la segona o \"sda\" per a la primera unitat SCSI, etc.\n"
-"\n"
-"Per particionar el disc dur seleccionat, podeu utilitzar aquestes opcions:\n"
-"\n"
-" * \"Buida-ho tot\": aquesta opció suprimeix totes les particions que hi "
-"ha\n"
-"al disc dur seleccionat.\n"
-"\n"
-" * \"Assignació automàtica\": aquesta opció us permet crear automàticament "
-"les\n"
-"particions \"Ext2\" i Intercanvi en l'espai lliure del disc dur.\n"
-"\n"
-"\"Més\": dóna accés a funcions addicionals:\n"
-"\n"
-" * \"Desa la taula de particions\": desa la taula de particions en un "
-"disquet.\n"
-"És útil per a una posterior recuperació de la taula de particions si fos "
-"necessari.\n"
-"Es recomana que efectueu aquesta operació.\n"
-"\n"
-" * \"Restaura la taula de la particions\": permet restaurar una taula de "
-"particions\n"
-"que hagueu desat prèviament en un disquet.\n"
-"\n"
-" * \"Recupera la taula de particions\": si la taula de particions està "
-"malmesa, podeu\n"
-"provar de recuperar-la utilitzant aquesta opció. Tingueu cura i recordeu que "
-"pot fallar.\n"
-"\n"
-" * \"Recarrega la taula de particions\": descarta tots els canvis fets i "
-"torna a \n"
-"carregar la taula de particions inicial.\n"
-"\n"
-" * \"Muntatge automàtic de suports extraïbles\": si desseleccioneu "
-"aquesta opció fareu\n"
-"que els usuaris hagin de muntar i desmuntar les unitats de suports "
-"extraïbles com els \n"
-"disquets i els CD-ROM.\n"
-"\n"
-" * \"Auxiliar\": utilitzeu aquesta opció si voleu usar un auxiliar per "
-"particionar el \n"
-"vostre disc dur. Es recomana que l'utilitzeu si no teniu un bon coneixement "
-"sobre el\n"
-"particionament.\n"
-"\n"
-" * \"Desfés\": utilitzeu aquesta opció per cancel·lar els canvis.\n"
-"\n"
-" * \"Canvia entre mode normal/expert\": permet accions addicionals en les "
-"particions\n"
-"(tipus, opcions, format) i dóna més informació.\n"
-"\n"
-" * \"Fet\": quan hagueu acabat de particionar el vostre disc dur, aquesta "
-"opció\n"
-"desarà els canvis al disc.\n"
-"\n"
-"Nota: podeu accedir a qualsevol opció mitjançant el teclat. Moveu-vos per "
-"les\n"
-"particions amb les tecles Tab i Fletxa amunt/Fletxa avall.\n"
-"\n"
-"Quan seleccioneu una partició, podeu utilitzar:\n"
-"\n"
-" * Ctrl+C per crear una nova partició (quan se n'ha seleccionat una de "
-"buida)\n"
-"\n"
-" * Ctrl+D per suprimir una partició\n"
-"\n"
-" * Ctrl+M per definir el punt de muntatge\n"
-"\n"
-"Per a més informació sobre els diferents sistemes de fitxers disponibles, "
-"llegiu\n"
-"el capítol sobre ext2FS del \"Manual de Referència\".\n"
-"\n"
-"Si esteu fent la instal·lació en un ordinador PPC, potser voldreu crear una\n"
-"petita partició \"bootstrap\" HFS d'un mínim d'1 MB per a ús del carregador\n"
-"d'arrencada yaboot. Si decidiu fer-la una mica més gran, per exemple de\n"
-"50 MB, us serà d'utilitat per emmagatzemar un nucli de recanvi i una imatge\n"
-"del disc RAM per a situacions d'emergència durant l'arrencada."
+"No s'ha pogut escriure /etc/sysconfig/bootsplash\n"
+"No s'ha trobat el fitxer."
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Ara és el moment de triar el nivell de seguretat desitjat per a la màquina.\n"
-"Com a norma general, com més s'exposa un ordinador i com més vitals són les\n"
-"dades que s'hi emmagatzemen, més alt ha de ser el nivell de seguretat.\n"
-"Tanmateix, un nivell alt de seguretat sovint comporta una disminució de la\n"
-"facilitat d'ús. Consulteu el capítol \"msec\" del \"Manual de Referència\"\n"
-"per obtenir més informació sobre el significat dels nivells de seguretat.\n"
-"\n"
-"Si no sabeu quin escollir, deixeu l'opció per defecte."
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet access"
+msgstr "Accés a Internet"
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../standalone/draksplash:1
+#, c-format
msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
+"y coordinate of text box\n"
+"in number of characters"
msgstr ""
-"Ara esteu instal·lant el Mandrake Linux, però és probable que alguns "
-"paquets\n"
-"hagin estat actualitzats desde la data de llançament. Alguns errors poden "
-"haver\n"
-"estat resolts, i altres problemes de seguretat poden estar ja corregits. "
-"Per\n"
-"beneficiar-vos d'aquestes actualitzacions, us proposem de baixar-les "
-"d'Internet.\n"
-"Trieu \"Sí\" si teniu una connexió a Internet operativa, o \"No\" si voleu\n"
-"instal·lar-les més tard.\n"
-"\n"
-"Si trieu \"Sí\" apareixerà una llista de llocs des d'on podeu baixar-vos "
-"les\n"
-"actualitzacions. Escolliu la ubicació més propera. Aleshores, apareixerà "
-"un \n"
-"arbre de selecció de paquets: comproveu la selecció i premeu \"Instal·la\" "
-"per\n"
-"baixar i instal·lar els paquets seleccionats, o \"Cancel·la\" per abandonar."
+"coordenada y de la caixa de text\n"
+"en nombre de caràcters"
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
msgstr ""
-"Per poder-les utilitzar, cal formatar les particions que s'acaben de "
-"definir\n"
-"(la formatació consisteix a crear-hi un sistema de fitxers).\n"
-"\n"
-"En aquest punt, potser voldreu tornar a formatar algunes de les particions\n"
-"existents per eliminar les dades que contenen. Si és així, seleccioneu "
-"també\n"
-"aquestes particions.\n"
-"\n"
-"Tingueu en compte que no cal tornar a formatar totes les particions que ja\n"
-"existien; heu de tornar a formatar les particions que contenen el sistema\n"
-"operatiu (com ara \"/\", \"/usr\" o \"/var\"), però no les que contenen "
-"dades\n"
-"que voleu conservar (habitualment, \"/home\").\n"
-"\n"
-"Aneu amb compte en seleccionar les particions; després de la formatació, "
-"totes\n"
-"les dades s'hauran suprimit i no en podreu recuperar cap.\n"
-"\n"
-"Feu clic a \"D'acord\" quan estigueu a punt per formatar les particions.\n"
-"\n"
-"Feu clic a \"Cancel·la\" si voleu seleccionar una altra partició per "
-"instal·lar\n"
-"el nou sistema Mandrake Linux.\n"
-"\n"
-"Feu clic a \"Avançat\" si voleu que es busquin sectors defectuosos del disc "
-"en\n"
-"alguna de les particions."
+"Per veure una llista de les opcions disponibles per a la impressora actual "
+"feu clic sobre el botó \"Imprimeix la llista d'opcions\"."
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Ja ho teniu. S'ha completat la instal·lació i el vostre sistema GNU/Linux "
-"està\n"
-"preparat per fer-lo servir. Simplement premeu \"D'acord\" per reiniciar el "
-"sistema.\n"
-"Podeu iniciar GNU/Linux o Windows, el que volgueu (si teniu doble "
-"arrencada), així\n"
-"que l'ordinador s'hagi reiniciat.\n"
-"\n"
-"El botó \"Avançat\" (només en mode expert) mostra dos botons més:\n"
-"\n"
-" * \"Genera un disquet d'instal·lació automàtica\": per crear un disquet \n"
-"d'instal·lació que permetrà fer una instal·lació completa sense l'ajuda "
-"d'un\n"
-"operador, semblant a la instal·lació que acabeu de configurar.\n"
-"\n"
-" Cal remarcar que es poden triar dues opcions diferents:\n"
-"\n"
-" * \"Repetició\". Aquesta és una instal·lació parcialment automatitzada "
-"ja que\n"
-"el pas de particionar (i només aquest) es manté interactiu;\n"
-"\n"
-" * \"Automatitzada\". Instal·lació completament automatitzada: el disc "
-"dur es\n"
-"reescriu completament i totes les dades es perden.\n"
-"\n"
-" Aquesta característica és força útil quan es fan instal·lacions a un bon "
-"grapat\n"
-"d'ordinadors similars. Mireu la secció d'instal·lació automàtica en la "
-"nostra web.\n"
-"\n"
-" * \"Desa la selecció de paquets\"(*): desa la selecció de paquets tal com\n"
-"s'han seleccionat abans en aquesta instal·lació. Aleshores, quan feu una "
-"altra\n"
-"instal·lació, inseriu el disquet a la unitat lectora i executeu la "
-"instal·lació.\n"
-"Aneu a la pantalla d'ajuda prement la tecla F1, i teclegeu 'linux defcfg="
-"\"floppy\"'.\n"
-"\n"
-"(*) Necessiteu un disquet formatat en FAT (per crear-ne un sota GNU/Linux, "
-"escriviu\n"
-"\"mformat a:\")"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Enabling servers..."
+msgstr "S'estan habilitant els servidors..."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing test page(s)..."
+msgstr "S'esta(n) imprimint la(es) pàgina(es) de prova..."
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "There is already a partition with mount point %s\n"
+msgstr "Ja hi ha una partició amb el punt de muntatge %s\n"
#: ../../help.pm:1
#, fuzzy, c-format
@@ -2313,51 +2098,49 @@ msgid ""
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
msgstr ""
"Ara és quan heu de decidir en quin lloc del vostre disc dur voleu "
"instal·lar\n"
@@ -2453,211 +2236,123 @@ msgstr ""
"particions\"\n"
"de la \"Guia d'Iniciació\"."
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Finalment, se us demanarà si voleu veure una interfície gràfica en "
-"arrencar.\n"
-"Noteu que aquesta pregunta se us farà encara que no hàgiu fet el test de la\n"
-"configuració. Òbviament, respondreu \"No\" si l'ordinador ha de ser un\n"
-"servidor, o si no heu pogut completar la configuració de la pantalla amb "
-"èxit."
+msgid "Ukraine"
+msgstr "Ucraïna"
-#: ../../help.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
+msgid "Application:"
+msgstr "Aplicació:"
-#: ../../help.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
+msgid "External ISDN modem"
+msgstr "Mòdem XDSI extern"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, report check result by mail."
msgstr ""
-#: ../../help.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
+msgid "Your choice? (default %s) "
+msgstr "Quina és la vostra elecció? (predeterminat %s)"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
msgstr ""
-#: ../../help.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid " / Region"
+msgstr "Reunion"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
+"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
-"Test\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
"\n"
-"Options\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
-" You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
msgstr ""
-"El GNU/Linux gestiona el temps en GMT (Greenwich Mean Time) i el tradueix a\n"
-"temps local d'acord amb el fus horari seleccionat. De tota manera és "
-"possible\n"
-"desactivar-ho desmarcant \"Rellotge del maquinari en GMT\" de manera que el\n"
-"rellotge de la màquina és el mateix que el rellotge del sistema. Això és\n"
-"convenient quan la màquina també té instal·lat un altre sistema operatiu "
-"com \n"
-"Windows.\n"
+"La(es) pàgina(es) de prova s'ha(n) enviat a la impressora.\n"
+"Pot passar un cert temps abans no comenci la impressió.\n"
+"Estat de la impressió:\n"
+"%s\n"
"\n"
-"L'opció de \"Sincronització automàtica de l'hora\" regularà automàticament\n"
-"l'hora connectant-se a un servidor horari remot d'Internet. En la llista\n"
-"que es presenta, escolliu un servidor ubicat a prop vostre. Necessiteu una\n"
-"connexió a Internet operativa perquè aquesta característica funcioni. El "
-"que\n"
-"farà realment és instal·lar en la vostra màquina un servidor horari, que "
-"poden\n"
-"usar opcionalment els altres ordinadors de la xarxa local."
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "daily"
+msgstr "diària"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
+msgid "and one unknown printer"
msgstr ""
-"Ara podeu triar quins serveis voleu que s'iniciïn durant l'arrencada.\n"
"\n"
-"Aquí es llisten tots els serveis disponibles amb la instal·lació actual.\n"
-"Reviseu-los amb cura i desmarqueu aquells que no seran necessaris sempre\n"
-"durant l'arrencada.\n"
-"\n"
-"Podeu obtenir una explicació breu sobre un servei si el seleccioneu. Si no\n"
-"esteu segur de la utilitat d'un servei, el més segur és deixar el "
-"comportament\n"
-"per defecte.\n"
-"\n"
-"Aneu especialment amb cura en aquest pas si penseu utilitzar l'ordinador "
-"com\n"
-"a servidor: segurament no us interessarà iniciar serveis que no necessiteu.\n"
-"Recordeu que hi ha diversos serveis que poden ser perillosos si s'habiliten\n"
-"en un servidor. En general, seleccioneu només els serveis que realment "
-"necessiteu."
+"i una impressora desconeguda estan "
-#: ../../help.pm:1
+#
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
+msgid "Ireland"
+msgstr "Irlanda"
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "kernel version"
+msgstr "versió del nucli"
+
+#
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid " Restore Configuration "
+msgstr " Configuració de restauració "
+
+#: ../../Xconfig/test.pm:1
+#, fuzzy, c-format
+msgid "Is this the correct setting?"
+msgstr "Això és correcte?"
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
@@ -2700,4334 +2395,4066 @@ msgstr ""
"Si voleu configurar la xarxa més tard després de la instal·lació, o si ja \n"
"heu acabat de configurar la connexió de xarxa, feu clic a \"Cancel·la\"."
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
-"Finalment, depenent de si heu seleccionat poder triar els paquets "
-"individuals\n"
-"o no, se us presentarà un arbre amb tots els paquets classificats per grups "
-"i\n"
-"subgrups. Mentre navegueu per l'arbre, podeu seleccionar grups complets,\n"
-"subgrups o paquets individuals.\n"
-"\n"
-"Cada cop que seleccioneu un paquet de l'arbre, apareix una descripció a la\n"
-"dreta. Quan hagueu acabat la selecció de paquets, cliqueu a \"Instal·la\",\n"
-"que iniciarà el procés d'instal·lació. Depenent de la velocitat del vostre \n"
-"maquinari i del número de paquets que necessitin ser instal·lats, el procés\n"
-"pot trigar una bona estona en acabar. A la pantalla es mostrarà una "
-"estimació\n"
-"del temps que durarà la instal·lació de tots els paquets, per tal ajudar-"
-"vos\n"
-"a decidir si teniu prou temps per gaudir d'una tassa de cafè.\n"
-"\n"
-"Si heu seleccionat un paquet de servidor, intencionadament o perquè formava\n"
-"part d'un grup, se us demanarà que confirmeu si realment voleu instal·lar\n"
-"aquests servidors. Sota Mandrake Linux, qualsevol servidor instal·lat "
-"s'inicia\n"
-"per defecte quan el sistema arrenca. Tot i que fossin segurs i no "
-"tinguessin\n"
-"cap problema quan es va fer la distribució, podria ser que es descobrissin\n"
-"forats de seguretat després que aquesta versió de Mandrake Linux es "
-"completés.\n"
-"Si no sabeu què se suposa que fa un servei en particular o per què s'està\n"
-"instal·lant, aleshores feu clic a \"No\". Si pitgeu \"Sí\" s'instal·laran\n"
-"els serveis llistats i s'iniciaran automàticament per defecte.\n"
-"\n"
-"L'opció de \"Dependències automàtiques\" només deshabilita el diàleg "
-"d'advertència\n"
-"que apareix quan l'instal·lador selecciona automàticament un paquet. Això\n"
-"passa perquè s'ha determinat que es necessita safisfer una dependència d'un\n"
-"altre paquet per tal que la instal·lació es completi amb èxit.\n"
-"\n"
-"La icona petita d'un disquet al final de la llista permet carregar una "
-"llista\n"
-"de paquets escollits en una instal·lació anterior. Fent clic en aquesta "
-"icona\n"
-"el sistema us demanarà que inseriu un disquet creat prèviament al final "
-"d'una\n"
-"altra instal·lació. Mireu el segon suggeriment de l'últim pas per saber com "
-"crear\n"
-"aquest tipus de disquet."
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Ha arribat el moment d'especificar quins programes voleu instal·lar en el\n"
-"sistema. Hi ha milers de paquets en el Mandrake Linux, i no se suposa que\n"
-"els conegueu tots de memòria.\n"
-"\n"
-"Si esteu fent una instal·lació estàndar des del CD-ROM, primer se us "
-"demanarà\n"
-"que especifiqueu els CD que teniu (només en mode Expert). Comproveu les "
-"etiquetes\n"
-"dels CD i marqueu els quadres corresponents als CD que teniu per fer la\n"
-"instal·lació. Cliqueu \"D'acord\" quan vulgueu continuar.\n"
-"\n"
-"Els paquets estan ordenats en grups que corresponen a un ús particular de "
-"la\n"
-"màquina. Els grups també estan ordenats en quatre seccions:\n"
-"\n"
-" * \"Estació de treball\": si voleu utilitzar l'ordinador com a estació de \n"
-"treball, seleccioneu un o més grups dels corresponents;\n"
-"\n"
-" * \"Desenvolupament\": si la vostra màquina s'ha d'utilitzar per "
-"programar,\n"
-"escolliu el(s) grup(s) desitjat(s);\n"
-"\n"
-" * \"Servidor\": si l'ordinador s'ha d'utilitzar com a servidor, serà "
-"possible\n"
-"de seleccionar els serveis més habituals que voleu instal·lar en la vostra\n"
-"màquina;\n"
-"\n"
-" * \"Entorn Gràfic\": finalment, aquí és on escollireu quin és el vostre\n"
-"entorn gràfic preferit. Heu de seleccionar com a mínim un entorn gràfic si\n"
-"voleu tenir una estació de treball gràfica.\n"
-"\n"
-"Moure el cursor per sobre d'un nom de grup farà que es mostri una breu "
-"explicació\n"
-"d'aquest grup. Si desmarqueu tots els grups quan estigueu fent una "
-"instal·lació\n"
-"des de zero (en contraposició a una actualització), se us presentarà un "
-"diàleg \n"
-"proposant-vos diferents opcions per a una instal·lació mínima:\n"
-"\n"
-" * \"Amb X\": instal·lar els mínims paquets necessaris per tenir un entorn "
-"gràfic\n"
-"funcional;\n"
-"\n"
-" * \"Amb Documentació Bàsica\": instal·lar el sistema base i les utilitats "
-"bàsiques\n"
-"amb la seva documentació. Aquesta instal·lació és adequada per configurar un "
-"sistema\n"
-"servidor;\n"
-"\n"
-" * \"Instal·lació Realment Mínima\": s'instal·larà el mínim necessari per "
-"tenir un\n"
-"sistema Linux operatiu, només amb línia d'ordres. Aquesta instal·lació "
-"ocupa\n"
-"uns 65MB.\n"
-"\n"
-"Podeu marcar la casella de \"Selecció individual de paquets\", que és força "
-"útil si\n"
-"coneixeu els diversos paquets que s'ofereixen per instal·lar o si voleu "
-"tenir\n"
-"control total sobre el que s'instal·larà.\n"
-"\n"
-"Si heu començat la instal·lació en el mode \"Actualització\", podeu "
-"desmarcar \n"
-"tots els grups si voleu evitar que s'instal·li cap paquet nou. Això és "
-"útil \n"
-"per reparar o actualitzar un sistema existent."
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
-msgstr ""
-"La instal·lació del Mandrake Linux està repartida en diversos CD-ROM. El "
-"DrakX\n"
-"sap si un paquet seleccionat es troba a un altre CD-ROM i expulsarà el CD "
-"actual\n"
-"i us demanarà que n'inseriu un altre a mesura que ho necessiti."
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Aquestes són les particions de Linux existents que s'han detectat a la\n"
-"vostra unitat de disc dur. Podeu conservar les eleccions fetes per "
-"l'auxiliar, \n"
-"són adequades per a un ús normal. Si feu algun canvi, com a mínim heu de "
-"definir\n"
-"una partició arrel (\"/\"). No escolliu una partició massa petita, o no "
-"podreu\n"
-"instal·lar prou programari. Si voleu emmagatzemar les dades en una altra "
-"partició, també haureu de seleccionar una \"/home\" (només si teniu més "
-"d'una partició de\n"
-"Linux disponible).\n"
-"\n"
-"Per a la vostra informació, cada partició està identificada d'aquesta "
-"manera: \"Nom\", \"Capacitat\".\n"
-"\n"
-"\"Nom\" es compon de: \"tipus d'unitat de disc\", \"número d'unitat de disc"
-"\",\n"
-"\"número de la partició\" (per exemple, \"hda1\").\n"
-"\n"
-"El \"Tipus d'unitat de disc\" és \"hd\" si la vostre unitat de disc és IDE i "
-"\"sd\" si és SCSI.\n"
-"\n"
-"El \"Número de la unitat de disc\" és sempre una lletra després d'\"hd\" o "
-"\"sd\".\n"
-"Amb unitats de disc IDE:\n"
-"\n"
-" * \"a\" significa \"unitat de disc mestra en el controlador IDE primari\",\n"
-"\n"
-" * \"b\" significa \"unitat de disc esclava en el controlador IDE primari"
-"\",\n"
-"\n"
-" * \"c\" significa \"unitat de disc mestra en el controlador IDE secundari"
-"\",\n"
-"\n"
-" * \"d\" significa \"unitat de disc esclava en el controlador IDE secundari"
-"\".\n"
-"\n"
-"Amb les unitats de disc SCSI, una \"a\" significa \"unitat primària de disc"
-"\",\n"
-"una \"b\" significa \"unitat secundària de disc\", etc."
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
-msgstr ""
-"GNU/Linux és un sistema multiusuari, i això vol dir que cada usuari pot "
-"tenir\n"
-"les seves preferències, els seus fitxers, etc. Podeu llegir la \"Guia de "
-"l'Usuari\"\n"
-"per aprendre més coses. A diferència del \"root\", que és l'administrador, \n"
-"als usuaris que afegiu aquí no se'ls permetrà modificar res tret dels seus\n"
-"fitxers i la seva configuració. Cal que tingueu com a mínim un usuari "
-"normal.\n"
-"Aquest compte és en el que hauríeu d'entrar per a un ús habitual. Tot i que "
-"és\n"
-"molt pràctic entrar en el sistema com a \"root\" cada dia, també pot ser "
-"molt\n"
-"perillós. La més petita errada podría significar que el sistema deixés de "
-"funcionar.\n"
-"Si cometeu una gran errada com a usuari normal, podeu perdre algunes dades, "
-"però no\n"
-"tot el sistema.\n"
-"\n"
-"Primer, heu d'introduir el vostre nom real. Per suposat, això no és "
-"necessari, ja que\n"
-"podeu introduir el que volgueu. El DrakX agafarà la primera paraula que heu "
-"entrat\n"
-"en la casella i la copiarà en el \"Nom d'usuari\". Aquest és el nom que "
-"utilitzarà\n"
-"aquest usuari per entrar en el sistema. El podeu canviar si voleu. Després "
-"cal que\n"
-"introduïu una contrasenya. Una contrasenya d'un usuari no privilegiat "
-"(habitual) \n"
-"no és tant important com la del \"root\" des del punt de vista de la "
-"seguretat, \n"
-"però no hi ha cap raó per menystenir-ho: al cap i a la fi, els vostres "
-"fitxers\n"
-"estan en joc.\n"
-"\n"
-"Si cliqueu a \"Accepta l'usuari\", després en podreu afegir tants com "
-"volgueu. Afegiu\n"
-"un usuari per tothom qui hagi de fer servir l'ordinador. Quan hagueu acabat "
-"d'afegir\n"
-"tants usuaris com volgueu, seleccioneu \"Fet\".\n"
-"\n"
-"Si feu clic al botó \"Avançat\" podreu canviar l'intèrpret d'ordres (\"shell"
-"\") \n"
-"predeterminat de l'usuari seleccionat (bash per defecte).\n"
-"\n"
-"Un cop hagueu acabat d'afegir usuaris, se us proposarà triar quin usuari "
-"entrarà\n"
-"automàticament en el sistema en arrencar l'ordinador. Si us interessa "
-"aquesta \n"
-"característica (i no us importa gaire la seguretat local), trieu l'usuari i "
-"el\n"
-"gestor de finestres desitjat i feu clic a \"Sí\".\n"
-"Si no us interessa aquesta característica, pitgeu \"No\"."
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
-msgstr ""
-"Abans de continuar, hauríeu de llegir amb deteniment les clàusules de la \n"
-"llicència. Aquesta cobreix la totalitat de la distribució Mandrake Linux.\n"
-"Si no esteu d'acord amb tots els termes de la llicència, feu clic al botó\n"
-"\"Refusa\" i la instal·lació terminarà immediatament. Per continuar amb la\n"
-"instal·lació, feu clic al botó \"Accepta\"."
-
-#: ../../install2.pm:1
-#, c-format
-msgid "You must also format %s"
-msgstr "També heu de formatar %s"
-
-#: ../../install2.pm:1
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"No es pot accedir als mòduls del nucli corresponents al vostre nucli (no "
-"s'ha trobat el fitxer %s). Això generalment vol dir que el vostre disquet "
-"d'arrencada no està sincronitzat amb el suport d'instal·lació (si us plau, "
-"creeu un nou disquet d'arrencada)"
-
-#: ../../install_any.pm:1
-#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"S'ha produït un error: no s'han trobat dispositius vàlids on crear nous "
-"sistemes de fitxers. Si us plau, comproveu el vostre maquinari per trobar el "
-"problema"
-
-#: ../../install_any.pm:1 ../../partition_table.pm:1
-#, c-format
-msgid "Error reading file %s"
-msgstr "S'ha produït un error en llegir el fitxer %s"
-
-#: ../../install_any.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Per utilitzar aquesta selecció de paquets que heu desat, arrenqueu la "
-"instal·lació amb \"linux defcfg=floppy\""
+msgid "Wizard Configuration"
+msgstr "Auxiliar de configuració"
-#: ../../install_any.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "Aquest disquet no està formatat amb FAT"
+msgid "Autoprobe"
+msgstr "Exploració automàtica"
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Inseriu un disquet formatat amb FAT a la unitat %s"
+msgid "Backup system files..."
+msgstr "Fes una còpia de seguretat dels fitxers del sistema..."
#: ../../install_any.pm:1
#, c-format
msgid "Can't use broadcast with no NIS domain"
msgstr "No es pot utilitzar la difusió sense un domini NIS"
-#: ../../install_any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-"Se suprimiran els següents paquets per poder actualitzar el sistema: %s\n"
-"\n"
-"\n"
-"Voleu realment suprimir aquests paquets?\n"
+msgid "Removing printer \"%s\"..."
+msgstr "S'està suprimint la impressora \"%s\"..."
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "No"
-msgstr "No"
+msgid "drakfloppy"
+msgstr "drakfloppy"
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Yes"
-msgstr "Sí"
-
-#: ../../install_any.pm:1
-#, fuzzy, c-format
msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
+"Please indicate where the auto_install.cfg file is located.\n"
"\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
-"Do you really want to install these servers?\n"
msgstr ""
-"Heu seleccionat el(s) següent(s) servidor(s): %s\n"
-"\n"
-"\n"
-"Aquests servidors estan activats per defecte. No tenen cap problema de "
-"seguretat\n"
-"conegut, però se'n podrien trobar de nous. Si fos així, haureu d'actualitzar-"
-"los\n"
-"el més aviat possible.\n"
-"\n"
-"\n"
-"Voleu realment instal·lar aquests servidors?\n"
-#
-#: ../../install_gtk.pm:1
-#, fuzzy, c-format
-msgid "System configuration"
-msgstr "Configuració de l'avís"
-
-#: ../../install_gtk.pm:1
-#, fuzzy, c-format
-msgid "System installation"
-msgstr "Instal·lació del SILO"
-
-#: ../../install_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Bringing down the network"
-msgstr "S'està desactivant la xarxa"
+msgid "information level that can be obtained through the cpuid instruction"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Bringing up the network"
-msgstr "S'està activant la xarxa"
+msgid "Peru"
+msgstr "Perú"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Ha fallat el particionament: %s"
+msgid " on device: %s"
+msgstr " en el dispositiu: %s"
#: ../../install_interactive.pm:1
#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-"L'auxiliar de particionament del DrakX ha trobat les solucions següents:"
+msgid "Remove Windows(TM)"
+msgstr "Elimina el Windows(TM)"
-#: ../../install_interactive.pm:1
+#
+#: ../../services.pm:1
#, c-format
-msgid "I can't find any room for installing"
-msgstr "No es pot trobar espai per a la instal·lació"
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr "Inicia l'X Font Server (això és necessari perquè l'XFree funcioni)."
-#: ../../install_interactive.pm:1
-#, c-format
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
msgstr ""
-"Ara podeu fer les particions a %s.\n"
-"Quan acabeu, no oblideu desar-les utiltzant 'w'"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use fdisk"
-msgstr "Utilitza l'fdisk"
+"La majoria d'aquests valors s'han obtingut\n"
+"del vostre sistema actual. Podeu modificar-los si cal."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Custom disk partitioning"
-msgstr "Particionament personalitzat de disc"
+msgid "Select the font file or directory and click on 'Add'"
+msgstr "Seleccioneu el fitxer o directori de fonts i feu clic a 'Afegeix'"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"Es perdran TOTES les particions, i les dades que contenen, de la unitat %s"
+msgid "Madagascar"
+msgstr "Madagascar"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Teniu més d'un disc dur; en quin voleu instal·lar el Linux?"
+msgid "Urpmi"
+msgstr "Urpmi"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Erase entire disk"
-msgstr "Esborra tot el disc"
+msgid "Cron not available yet as non-root"
+msgstr "El cron encara no és disponible per a usuaris que no siguin root"
-#: ../../install_interactive.pm:1
+#
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Elimina el Windows(TM)"
+msgid "System"
+msgstr "Sistema"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, fuzzy, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
+msgid "Do you want to use this feature?"
+msgstr "Voleu utilitzar l'aboot?"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Arabic"
msgstr ""
-"No hi ha cap partició FAT a la qual canviar la mida o que es pugui utilitzar "
-"com a loopback (o no hi queda prou espai)"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"\n"
+"- Options:\n"
msgstr ""
+"\n"
+"- Opcions:\n"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Ha fallat el redimensionament de la FAT: %s"
+msgid "Password required"
+msgstr "La contrasenya és necessària"
-#: ../../install_interactive.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Resizing Windows partition"
-msgstr "S'està redimensionant la partició de Windows"
+msgid "%d minutes"
+msgstr "%d minuts"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Resizing"
-msgstr "S'està canviant la mida"
+msgid "Graphics card: %s"
+msgstr "Targeta gràfica: %s"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "partition %s"
-msgstr "partició %s"
+msgid "WebDAV transfer failed!"
+msgstr "La transferència WebDAV ha fallat!"
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Quina mida voleu deixar per a la partició de Windows?"
+msgid "XFree configuration"
+msgstr "Configuració de l'XFree"
-#
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ATENCIÓ!\n"
-"\n"
-"Tot seguit, el DrakX canviarà la mida de la vostra partició de Windows. Aneu "
-"amb\n"
-"compte: aquesta operació és perillosa. Si encara no ho heu fet, sortiu de "
-"la\n"
-"instal·lació, executeu l'Scandisk sota Windows (i potser també el defrag) i\n"
-"torneu a començar la instal·lació. Feu també una còpia de seguretat de les\n"
-"vostres dades.\n"
-"Quan estigueu segur, premeu \"D'acord\"."
+msgid "Choose action"
+msgstr "Trieu una acció"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
-msgstr ""
-"La partició de Windows està massa fragmentada. Si us plau, reinicieu "
-"l'ordinador sota Windows i executeu l'eina \"defrag\". Llavors, torneu a "
-"començar la instal·lació del Mandrake Linux."
+msgid "French Polynesia"
+msgstr "Polinèsia francesa"
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Utilitza l'espai lliure de la partició de Windows"
-
-#: ../../install_interactive.pm:1
-#, c-format
msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
msgstr ""
-"El redimensionador de la FAT no pot gestionar la vostra partició. \n"
-"S'ha produït l'error següent: %s"
+"El DrakX generalment detecta el nombre de botons que té el vostre ratolí. "
+"Si\n"
+"no pot, assumeix que teniu un ratolí de dos botons i el configurarà per "
+"emular\n"
+"el tercer botó. El DrakX detectarà automàticament si el ratolí és PS/2, "
+"sèrie o\n"
+"USB.\n"
+"\n"
+"Si voleu especificar un tipus diferent de ratoli seleccioneu el tipus \n"
+"apropiat de la llista.\n"
+"\n"
+"Si escolliu un ratolí diferent del ratolí per defecte, es mostrarà una "
+"pantalla\n"
+"de test. Proveu els botons i la roda per verificar que la configuració és\n"
+"correcta. Si el ratolí no funciona bé, premeu la barra espaiadora o la \n"
+"tecla de retorn per cancel·lar i triar de nou.\n"
+"\n"
+"De vegades, la roda del ratolí no es detecta automàticament. En aquest cas,\n"
+"haureu de seleccionar-ho a la llista. Assegureu-vos de triar aquell que es\n"
+"correspongui amb el port on teniu connectat el ratolí. Quan premeu \"D'acord"
+"\"\n"
+"apareixerà la imatge d'un ratolí perquè proveu tots els botons i els "
+"moviments."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "A quina partició voleu canviar-li la mida?"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "Funciona amb OKI 4w i winprinters compatibles."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Utilitza l'espai lliure de la partició de Windows"
-
-#: ../../install_interactive.pm:1
-#, fuzzy, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"No hi ha cap partició FAT a la qual canviar la mida o que es pugui utilitzar "
-"com a loopback (o no hi queda prou espai)"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr "Executa el sistema de so ALSA (Advanced Linux Sound Architecture)"
-#: ../../install_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Mida de la partició d'intercanvi en MB: "
+msgid "Installing driver for %s card %s"
+msgstr "S'està instal·lant el controlador per a la targeta de %s %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Root partition size in MB: "
-msgstr "Mida de la partició arrel en MB: "
+msgid ""
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
+msgstr ""
+"Heu tranferit la vostra impressora predeterminada anterior (\"%s\"). Voleu "
+"que també sigui la impressora predeterminada en el nou sistema d'impressió %"
+"s?"
-#: ../../install_interactive.pm:1
+#
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Choose the sizes"
-msgstr "Escolliu les mides"
+msgid "Enable Server"
+msgstr "Habilita el servidor"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Quina partició voleu utilitzar per al Linux4Win?"
+msgid "Ukrainian"
+msgstr "Ucraïnès"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Utilitza la particio Windows per al loopback"
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
+msgstr ""
+"L'accés a la xarxa no ha funcionat i no s'ha pogut iniciar. Comproveu la "
+"configuració i el maquinari. Després proveu de configurar la impressora "
+"remota una altra vegada."
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "There is no existing partition to use"
-msgstr "No hi ha cap partició que es pugui utilitzar"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "Inseriu el disquet d'arrencada utilitzat a la unitat %s"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use existing partitions"
-msgstr "Utilitza les particions existents"
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Local network(s)"
+msgstr "Adreça de la xarxa local"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "No hi ha prou espai lliure per assignar noves particions"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
+msgstr "Elimina el Windows(TM)"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use free space"
-msgstr "Utilitza l'espai lliure"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr ""
+"El vostre escàner %s ha estat configurat.\n"
+"Ara podeu escanejar documents utilitzant \"XSane\" des de Multimèdia/Gràfics "
+"en el menú d'aplicacions."
-#
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Heu de tenir una partició FAT muntada en /boot/efi"
+msgid "Firewire controllers"
+msgstr ""
-#: ../../install_interactive.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"You don't have a swap partition.\n"
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
"\n"
-"Continue anyway?"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
msgstr ""
-"No teniu cap partició d'intercanvi.\n"
+"Un cop configurats els paràmetres generals del carregador de l'arrencada, \n"
+"es mostrarà la llista d'opcions de càrrega que es veurà en arrencar la "
+"màquina.\n"
"\n"
-"Voleu continuar igualment?"
+"Si hi ha algun altre sistema operatiu instal·lat en el vostre ordinador, \n"
+"s'inclourà automàticament al menú del carregador. Aquí podeu modificar les\n"
+"entrades del menú d'arrencada. Seleccioneu una entrada i feu clic a \n"
+"\"Modifica\" per modificar-la o esborrar-la. \"Afegeix\" crea una nova "
+"entrada,\n"
+"i \"Fet\" avança cap al següent pas de la instal·lació.\n"
+"També és possible que no vulgueu permetre a ningú l'accés a aquests "
+"sistemes\n"
+"operatius. En aquest cas, podeu suprimir les entrades corresponents, però\n"
+"aleshores us caldrà un disc d'arrencada per poder-los arrencar!"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Heu de tenir una partició arrel.\n"
-"Per fer-ho, creeu una partició (o feu clic a una d'existent).\n"
-"Després, trieu l'acció \"Punt de muntatge\" i doneu-li el valor '/'"
+msgid "System mode"
+msgstr "Mode de sistema"
-#: ../../install_interactive.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
msgstr ""
-"Part del maquinari del vostre ordinador necessita controladors\n"
-"\"registrats\" per poder funcionar. Podeu trobar-ne informació a: %s"
+"Per poder imprimir a una impressora NetWare, heu de proporcionar el nom del\n"
+"servidor d'impressió NetWare (tingueu en compte que pot ser diferent del "
+"nom\n"
+"TCP/IP del seu ordinador central), així com el nom de la cua d'impressió de\n"
+"la impressora a la qual voleu accedir i el nom d'usuari i contrasenya si "
+"són\n"
+"necessaris."
-#: ../../install_messages.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Netmask:"
+msgstr "Submàscara de xarxa"
+
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Felicitats! La instal·lació ha acabat.\n"
-"Traieu el suport d'arrencada i premeu Retorn per tornar a arrencar.\n"
-"\n"
-"\n"
-"Trobareu la solució als problemes coneguts d'aquesta versió del\n"
-"Mandrake Linux a la fe d'errates que hi ha a \n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"La informació sobre com configurar el vostre sistema està disponible a\n"
-"l'últim capítol d'instal·lació de la Guia Oficial de l'Usuari del\n"
-"Mandrake Linux."
+msgid "Append"
+msgstr "Afegeix"
-#: ../../install_messages.pm:1
-#, fuzzy, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr "http://www.mandrakelinux.com/en/90errata.php3"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr ""
+"Refresca la llista d'impressores (per veure totes les impressores CUPS "
+"remotes disponibles)"
-#: ../../install_messages.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
msgstr ""
-"\n"
-"Warning\n"
-"\n"
-"Si us plau, llegiu atentament les clàusules següents. Si no esteu\n"
-"d'acord amb qualsevol d'elles, no esteu autoritzat a instal·lar\n"
-"els CD següents. Premeu 'Rebutja' per continuar la instal·lació\n"
-"sense utilitzar aquests CD.\n"
-"\n"
-"\n"
-"Alguns dels components que s'inclouen en aquest CD no estan\n"
-"regits per la llicència GPL o acords semblants. Cadascun d'aquests\n"
-"components es regeix per les clàusules i condicions de la seva\n"
-"pròpia llicència específica. Si us plau, llegiu atentament i\n"
-"accepteu aquestes llicències específiques abans d'utilitzar o\n"
-"redistribuir els components esmentats. En general, aquestes\n"
-"llicències impedeixen la transferència, duplicació (excepte amb\n"
-"la finalitat de fer-ne còpies de seguretat), redistribució,\n"
-"enginyeria inversa, desassemblatge, decompilació o modificació del\n"
-"component. Qualsevol violació de l'acord finalitzarà immediatament\n"
-"els vostres drets sobre la llicència específica. Tret que la\n"
-"llicència específica us en garanteixi els drets, normalment no\n"
-"podreu instal·lar els programes en més d'un sistema, ni adaptar-lo\n"
-"per utilitzar-lo en una xarxa. En cas de dubte, poseu-vos en\n"
-"contacte directament amb el distribuïdor o editor del component.\n"
-"La transferència a terceres parts i la còpia d'aquests components,\n"
-"incloent la documentació, estan en general prohibides.\n"
-"\n"
-"\n"
-"Tots els drets sobre els components del CD següent pertanyen als\n"
-"seus autors respectius i estan protegits per les lleis de\n"
-"propietat intel·lectual i de copyright aplicables als programes\n"
-"informàtics.\n"
-#: ../../install_messages.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
-"5. Governing Laws \n"
+"It also provides a much higher API than OSS.\n"
"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
msgstr ""
-"Introducció\n"
-"\n"
-"D'ara endavant, hom es referirà al sistema operatiu i als diferents\n"
-"components disponibles en la distribució Mandrake Linux com als\n"
-"\"Productes de programari\". Els Productes de programari inclouen,\n"
-"però no estan restringits a, el conjunt de programes, mètodes, regles\n"
-"i documentació relativa al sistema operatiu i els diferents\n"
-"components de la distribució Mandrake Linux.\n"
-"\n"
-"\n"
-"1. Acord de llicència\n"
-"\n"
-"Si us plau, llegiu atentament aquest document. Aquest document és un\n"
-"acord de llicència entre la vostra persona i MandrakeSoft S.A., que\n"
-"s'aplica als Productes de programari. Pel fet d'instal·lar, duplicar\n"
-"o utilitzar els Productes de programari en qualsevol forma esteu\n"
-"acceptant explícitament, i expressant el vostre acord a avenir-vos a\n"
-"les clàusules i condicions d'aquesta Llicència. Si no esteu d'acord\n"
-"amb qualsevol part de la Llicència, no esteu autoritzat a instal·lar,\n"
-"duplicar o utilitzar els Productes de programari. Qualsevol intent\n"
-"d'instal·lar, duplicar o utilitzar els Productes de programari en una\n"
-"forma que no s'adapti a les clàusules i condicions d'aquesta\n"
-"Llicència, és nul i finalitzarà els vostres drets sobre la mateixa.\n"
-"En finalitzar-se la Llicència, heu de destruir immediatament totes\n"
-"les còpies dels Productes de programari.\n"
-"\n"
-"\n"
-"2. Garantia limitada\n"
-"\n"
-"Els Productes de programari i documentació adjunta es subministren\n"
-"\"tal com són\", sense cap garantia, fins al punt permés per la llei.\n"
-"MandrakeSoft S.A. no serà, sota cap circumstància, i fins al punt\n"
-"permés per la llei, responsable de cap dany especial, incidental ni\n"
-"directe (incloent, sense limitar-se a, els danys per pèrdua de\n"
-"negocis, interrupció de negocis, pèrdues financeres, multes i costes\n"
-"judicials, o qualsevol altre dany que resultin d'un judici, o\n"
-"qualsevol altre pèrdua d'importància) que resulti de l'ús o de la\n"
-"impossibilitat d'utilitzar els Productes de programari, fins i tot si\n"
-"MandrakeSoft S.A. ha estat avisat de la possibilitat que\n"
-"s'esdevinguin aquests danys.\n"
-"\n"
-"RESPONSABILITAT LIMITADA RELATIVA A LA POSSESSIÓ O UTILITZACIÓ DE PROGRAMARI "
-"PROHIBIT EN ALGUNS PAÏSOS\n"
-"\n"
-"Fins al punt permés per la llei, MandrakeSoft S.A. o els seus\n"
-"distribuïdors no seran, sota cap circumstància, responsables de cap\n"
-"dany especial, incidental ni directe (incloent, sense limitar-se a,\n"
-"els danys per pèrdua de negocis, interrupció de negocis, pèrdues\n"
-"financeres, multes i costes judicials, o qualsevol altre dany que\n"
-"resultin d'un judici, o qualsevol altre pèrdua d'importància) que\n"
-"resulti de la possessió i utilització dels components de programari o\n"
-"de la seva descàrrega des d'un dels llocs de Mandrake Linux, que\n"
-"estiguin prohibides o restringides en alguns països per les lleis\n"
-"locals. Aquesta responsabilitat limitada s'aplica, però no hi està\n"
-"restringida, als potents components criptogràfics inclosos als\n"
-"Productes de programari.\n"
-"\n"
-"\n"
-"3. la llicència GPL i llicències relacionades\n"
-"\n"
-"Els Productes de programari consisteixen en components creats per\n"
-"diferents persones o entitats. La majoria d'aquests components es\n"
-"regeixen per les clàusules i condicions de la Llicència General\n"
-"Pública de GNU, a la qual d'ara endavant hom s'hi referirà com a\n"
-"\"GPL\", o de llicències similars. la majoria d'aquestes llicències\n"
-"us permeten duplicar, adaptar o redistribuir els components que\n"
-"cobreixen. Si us plau, llegiu atentament les clàusules i condicions\n"
-"de l'acord de llicència de cada component abans d'utilitzar-lo.\n"
-"Qualsevol pregunta sobre la lllicència d'un component s'ha d'adreçar\n"
-"al seu autor i no a MandrakeSoft.\n"
-"Els programes desenvolupats per MandrakeSoft S.A. es regeixen per la\n"
-"llicència GPL.La documentació escrita per MandrakeSoft S.A. està regida per "
-"una\n"
-"llicència específica; consulteu la documentació per a més\n"
-"informació.\n"
-"\n"
-"\n"
-"4. Drets sobre la propietat intel·lectual\n"
-"\n"
-"Tots els drets sobre els components dels Productes de programari\n"
-"pertanyen als seus autors respectius i estan protegits per les lleis\n"
-"de propietat intel·lectual i de copyright aplicables als programes\n"
-"informàtics.\n"
-"MandrakeSoft S.A. es reserva els drets de modificar o adaptar els\n"
-"Productes de programari, totalment o parcialment, per tots els\n"
-"mitjans i amb totes les finalitats.\n"
-"\"Mandrake\", \"Mandrake Linux\" i els logotips associats son marques\n"
-"registrades de MandrakeSoft S.A.\n"
+"L'OSS (Sistema de So Obert) va ser la primera API de so. És una API "
+"independent del sistema operatiu (disponible en molts sistemes UNIX) però és "
+"molt bàsica i limitada.\n"
+"Encara més, tots els controladors OSS reinventen la roda...\n"
"\n"
+"L'ALSA (Arquitectura Avançada de So per a Linux) és una arquitectura modular "
+"que\n"
+"funciona amb una àmplia varietat de targetes ISA, USB i PCI.\n"
"\n"
-"5. Lleis rectores \n"
+"També proporciona una API molt més funcional que la d'OSS.\n"
"\n"
-"Si qualsevol part d'aquest acord és declarat nul, il·legal o\n"
-"inaplicable per un tribunal, aquesta part s'exclourà del contracte.\n"
-"Seguiu obligat, però, per les altres seccions aplicables de\n"
-"l'acord.\n"
-"Les clàusules i condicions d'aquesta Llicència es regeixen per les\n"
-"lleis de França.\n"
-"Tots els litigis sobre les clàusules d'aquesta llicència es dirimiran\n"
-"preferiblement fora dels tribunals. Com a últim recurs, el litigi es\n"
-"portarà als tribunals competents de París, França.\n"
-"Per a qualsevol tema relacionat amb aquest document, poseu-vos en\n"
-"contacte amb MandrakeSoft S.A.\n"
-
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "S'està entrant en el pas '%s'\n"
-
-#
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Help"
-msgstr "Ajuda"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "not configured"
-msgstr "torna a configurar"
-
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
-#, c-format
-msgid "Configure"
-msgstr "Configura"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Go on anyway?"
-msgstr "Voleu seguir igualment?"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "S'ha produït un error en instal·lar els paquets:"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr "S'ha produït un error en ordenar els paquets:"
+"Per utilitzar ALSA, es pot triar entre:\n"
+"- l'antiga API compatible d'OSS\n"
+"- la nova API d'ALSA que proporciona moltes característiques millorades però "
+"que necessita fer servir la lliberia ALSA.\n"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Change your Cd-Rom!\n"
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
+"You may prefer to replay the installation.\n"
msgstr ""
-"Canvieu el CD-ROM!\n"
+"Si ho desitgeu, la instal·lació automàtica es pot\n"
+"automatitzar completament, però en aquest cas\n"
+"prendrà el control del disc dur!\n"
+"(Això està pensat per a la instal·lació en un altre ordinador.)\n"
"\n"
-"Si us plau, inseriu el CD-ROM etiquetat com \"%s\" a la unitat i després\n"
-"premeu D'acord.\n"
-"Si no el teniu, premeu Cancel·la per no fer la instal·lació des d'aquest CD-"
-"ROM."
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Refuse"
-msgstr "Rebutja"
+"Potser preferireu repetir la instal·lació.\n"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Accept"
-msgstr "Accepta"
+msgid "Network printer \"%s\", port %s"
+msgstr "Impressora de xarxa \"%s\", port %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Installing package %s"
-msgstr "S'està instal·lant el paquet %s"
+msgid ""
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
+msgstr ""
+"Si us plau, escolliu l'adaptador de xarxa que es connectarà a la vostra "
+"xarxa d'àrea local."
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "%d packages"
-msgstr "%d paquets"
-
-#: ../../install_steps_gtk.pm:1
-#, fuzzy, c-format
-msgid "No details"
-msgstr "Detalls"
+msgid "OK to restore the other files."
+msgstr "'D'acord' per restaurar els altres fitxers."
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Details"
-msgstr "Detalls"
+msgid "Please choose your keyboard layout."
+msgstr "Si us plau, seleccioneu la disposició del vostre teclat."
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Espereu si us plau, s'està preparant la instal·lació..."
+msgid "Printer Device URI"
+msgstr "Dispositiu URI d'impressora"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Time remaining "
-msgstr "Temps restant "
+msgid "Not erasable media!"
+msgstr "Aquest suport no es pot esborrar!"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Estimating"
-msgstr "S'està estimant"
+msgid "Terminal-based"
+msgstr "Basat en terminal"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Installing"
-msgstr "S'està instal·lant"
+msgid "Installing a printing system in the %s security level"
+msgstr ""
+"S'està instal·lant un sistema d'impressió amb el nivell de seguretat %s"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Escolliu els paquets que voleu instal·lar"
+msgid "The user name is too long"
+msgstr "El nom d'usuari és massa llarg"
-#
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Minimal install"
-msgstr "Instal·lació mínima"
+msgid "Other OS (windows...)"
+msgstr "Un altre SO (Windows...)"
-#
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Updating package selection"
-msgstr "S'està actualitzant la selecció de paquets"
+msgid "WebDAV remote site already in sync!"
+msgstr "El lloc remot WebDAV ja està sincronitzat!"
#
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Load/Save on floppy"
-msgstr "Carrega/Desa al disquet"
-
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "<- Previous"
-msgstr "<- Anterior"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Install"
-msgstr "Instal·la"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Show automatically selected packages"
-msgstr "Mostra automàticament els paquets seleccionats"
+msgid "Reading printer database..."
+msgstr "S'està llegint la base de dades d'impressores..."
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "No podeu desseleccionar aquest paquet; s'ha d'actualitzar"
+msgid "Generate auto install floppy"
+msgstr "Genera un disquet per a la instal·lació automàtica"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
msgstr ""
-"Aquest paquet s'ha d'actualitzar.\n"
-"Esteu segur que voleu desseleccionar-lo?"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "No podeu desseleccionar aquest paquet; ja està instal·lat"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Aquest paquet és obligatori; no es pot desseleccionar"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't select/unselect this package"
-msgstr "No podeu seleccionar/desseleccionar aquest paquet"
+"\t\t nom d'usuari: %s\n"
+"\t\t en el camí: %s \n"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The following packages are going to be removed"
-msgstr "Ara s'eliminaran els paquets següents"
+msgid "Somalia"
+msgstr "Somàlia"
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "The following packages are going to be installed"
-msgstr "Ara s'instal·laran els paquets següents"
+#
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid "No open source driver"
+msgstr "No hi ha cap controlador conegut"
-#: ../../install_steps_gtk.pm:1
+#
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"You can't select this package as there is not enough space left to install it"
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
msgstr ""
-"No podeu seleccionar aquest paquet perquè no queda prou espai per instal·lar-"
-"lo"
+"Aquest és similar al nivell anterior, però el sistema està completament "
+"tancat i les característiques de seguretat estan al màxim."
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Importance: %s\n"
-msgstr "Importància: %s\n"
+msgid "Nicaragua"
+msgstr "Nicaragua"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Size: %d KB\n"
-msgstr "Mida: %d kB\n"
+msgid "New Caledonia"
+msgstr "Nova Caledònia"
-#: ../../install_steps_gtk.pm:1
+#
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Version: %s\n"
-msgstr "Versió: %s\n"
+msgid "European protocol (EDSS1)"
+msgstr "Protocol europeu (EDSS1)"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Name: %s\n"
-msgstr "Nom: %s\n"
+msgid "Video mode"
+msgstr "Mode de vídeo"
-#: ../../install_steps_gtk.pm:1
+#
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bad package"
-msgstr "Paquet incorrecte"
+msgid "Please enter your email address below "
+msgstr "Si us plau, entreu la vostra adreça electrònica"
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other"
-msgstr "Altres"
+msgid "Oman"
+msgstr "Oman"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Mida total: %d / %d MB"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Network Monitoring"
+msgstr "Configuració de xarxa"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Next ->"
-msgstr "Següent ->"
+msgid "SunOS"
+msgstr "SunOS"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Individual package selection"
-msgstr "Selecció individual de paquets"
+msgid "New size in MB: "
+msgstr "Nova mida en MB: "
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Package Group Selection"
-msgstr "Selecció del grup de paquets"
+msgid "Partition table type: %s\n"
+msgstr "Tipus de taula de particions: %s\n"
-#: ../../install_steps_gtk.pm:1
+#
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"El vostre sistema està baix de recursos; podeu tenir algun problema en\n"
-"instal·lar el Mandrake Linux. Si això passa, podeu provar d'instal·lar-lo "
-"en\n"
-"mode text. Per fer-ho, premeu 'F1' en arrencar des del CD-ROM i escriviu "
-"'text'."
+msgid "Authentication Windows Domain"
+msgstr "Autenticació en el domini de Windows"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Save packages selection"
-msgstr "Desa la selecció de paquets"
+msgid "US keyboard"
+msgstr "Teclat Estats Units"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Automated"
-msgstr "Automàtica"
+msgid "Buttons emulation"
+msgstr "Emulació dels botons"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Replay"
-msgstr "Repeteix"
+msgid ", network printer \"%s\", port %s"
+msgstr ", impressora de xarxa \"%s\", port %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
"\n"
-"You may prefer to replay the installation.\n"
+"Drakbackup activities via tape:\n"
+"\n"
msgstr ""
-"Si ho desitgeu, la instal·lació automàtica es pot\n"
-"automatitzar completament, però en aquest cas\n"
-"prendrà el control del disc dur!\n"
-"(Això està pensat per a la instal·lació en un altre ordinador.)\n"
"\n"
-"Potser preferireu repetir la instal·lació.\n"
+"Activitats del Drakbackup a travès de cinta:\n"
+"\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Generate auto install floppy"
-msgstr "Genera un disquet per a la instal·lació automàtica"
+msgid ""
+"\n"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
+msgstr ""
+"\n"
+" Hi ha hagut un problema en la connexió FTP: No ha estat possible enviar els "
+"fitxers de la còpia de seguretat per FTP.\n"
-#: ../../install_steps_interactive.pm:1
+#
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Reboot"
-msgstr "Arrel"
+msgid "Sending Speed:"
+msgstr "S'estan enviant els fitxers..."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
+msgid "Halt bug"
msgstr ""
-"Alguns passos no s'han completat.\n"
-"\n"
-"Segur que voleu sortir ara?"
-#: ../../install_steps_interactive.pm:1
+#
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Creating auto install floppy..."
-msgstr "S'està creant el diquet d'instal·lació automàtica"
+msgid "Mail alert configuration"
+msgstr "Configuració de l'alerta de correu"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Inseriu un disquet en blanc a la unitat %s"
+msgid "Tokelau"
+msgstr "Tokelau"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Bosnian"
+msgstr "Bosnià"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Release: "
+msgstr "Llançament: "
+
+#
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Connection speed"
+msgstr "Velocitat de la connexió"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
msgstr ""
-"Potser us caldrà canviar el dispositiu d'arrencada Open Firware per\n"
-"habilitar el carregador de l'arrencada. Si no veieu l'indicador del\n"
-"carregador de l'arrencada en tornar a arrencar, premeu\n"
-"Command-Option-O-F en tornar a arrencar i introduïu:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Després, escriviu: shut-down\n"
-"En l'arrencada següent heu de veure l'indicador del carregador de "
-"l'arrencada."
+"Si us plau, entreu el nom de dispositiu de l'enregistradora de CD\n"
+" ex: 0,1,0"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"Ha fallat la instal·lació del carregador de l'arrencada. S'ha produït "
-"l'error següent:"
+msgid "Namibia"
+msgstr "Namíbia"
#
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Installing bootloader"
-msgstr "S'està instal·lant el carregador de l'arrencada"
+msgid "Database Server"
+msgstr "Servidor de base de dades"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
+msgid "special capacities of the driver (burning ability and or DVD support)"
msgstr ""
-"S'ha produït un error en instal·lar l'aboot. \n"
-"Voleu intentar igualment la instal·lació encara que això destrueixi la "
-"primera partició?"
-#: ../../install_steps_interactive.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Do you want to use aboot?"
-msgstr "Voleu utilitzar l'aboot?"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "No es pot afegir una partició a un RAID _formatat_ md%d"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
+#: ../../Xconfig/card.pm:1
+#, c-format
msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"Sembla que teniu un ordinador OldWorld o una màquina \n"
-"desconeguda; el carregador d'arrencada yaboot no funcionarà.\n"
-"La instal·lació continuarà, però haureu d'utilitzar el BootX\n"
-"per arrencar l'ordinador"
+"La vostra targeta pot tenir acceleració 3D de maquinari, però només amb "
+"l'Xfree %s,\n"
+"TINGUEU EN COMPTE QUE ES TRACTA D'UN SUPORT EXPERIMENTAL; L'ORDINADOR ES POT "
+"PENJAR.\n"
+"L'XFree %s, que pot tenir un suport millor en 2D, suporta la vostra targeta."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Preparing bootloader..."
-msgstr "S'està preparant el carregador de l'arrencada..."
+msgid "Please wait, setting security options..."
+msgstr "Espereu si us plau, s'estan configurant les opcions de seguretat..."
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Domain Admin Password"
-msgstr "Contrasenya de l'administrador del domini"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr "Desconegut|CPH05X (bt878) [molts venedors]"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Domain Admin User Name"
-msgstr "Nom d'usuari de l'administrador del domini"
+msgid "Launch the graphical environment when your system starts"
+msgstr "Executa la interfície gràfica en iniciar el sistema"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Windows Domain"
-msgstr "Domini de Windows"
+msgid "hourly"
+msgstr "cada hora"
-#
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Authentication Windows Domain"
-msgstr "Autenticació en el domini de Windows"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
-msgstr ""
-"Per tal que funcioni en un W2K PDC, segurament haureu de fer que "
-"l'administrador executi \"C:\\>net localgroup 'Accés compatible amb vesions "
-"anteriors a Windows 2000' everyone /add\" i que reiniciï el servidor.\n"
-"També necessitareu el nom d'usuari i la contrasenya de l'administrador del "
-"domini per poder connectar la màquina al domini de Windows(TM).\n"
-"Si la xarxa encara no està operativa, el DrakX provarà de connectar-se al "
-"domini després del pas de configuració de la xarxa.\n"
-"Si aquesta configuració fallés per algun motiu i l'autenticació no "
-"funcionés, executeu 'smbpasswd -j DOMINI -U USUARI%CONTRASENYA' passant com "
-"a paràmetres el domini Windows en qüestió i el nom d'usuari i la contrasenya "
-"de l'administrador, després que arrenqui el sistema.\n"
-"L'ordre 'wbinfo -t' comprovarà si els secrets de l'autenticació són prou "
-"bons."
+msgid " Successfuly Restored on %s "
+msgstr " restaurades amb èxit en %s "
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "NIS Server"
-msgstr "Servidor NIS"
+msgid "Making printer port available for CUPS..."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "NIS Domain"
-msgstr "Domini del NIS"
+msgid "Antigua and Barbuda"
+msgstr "Antigua i Barbuda"
-#
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Authentication NIS"
-msgstr "Autenticació NIS"
+msgid ""
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
+msgstr ""
-#
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "NIS"
-msgstr "NIS"
+msgid "Spanish"
+msgstr "Espanyol"
#
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "LDAP Server"
-msgstr "Servidor LDAP"
+msgid "Start"
+msgstr "Inicia"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
+msgstr ""
#
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Authentication LDAP"
-msgstr "Autenticació LDAP"
+msgid "Configuring applications..."
+msgstr "S'estan configurant les aplicacions..."
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "LDAP"
-msgstr "LDAP"
+msgid "Normal modem connection"
+msgstr "Connexió normal per mòdem"
#
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Local files"
-msgstr "Fitxers locals"
-
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "Authentication"
-msgstr "Autenticació"
+msgid "File Selection"
+msgstr "Selecció de fitxers"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
+msgid ""
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+" tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+" standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
msgstr ""
-"Aquesta contrasenya és massa curta (ha de tenir com a mínim %d caràcters)"
+"Quina configuració XDSI preferiu?\n"
+"\n"
+"* La configuració antiga usa isdn4net. Conté eines molt\n"
+" potents, però és difícil de configurar, i no és estàndard.\n"
+"\n"
+"* La nova configuració és més fàcil d'entendre, més\n"
+" estàndard, però té menys eines.\n"
+"\n"
+"Nosaltres recomanen la nova configuració senzilla (isdn-light).\n"
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
-msgid "No password"
-msgstr "Sense contrasenya"
+msgid "CUPS"
+msgstr "CUPS"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Set root password"
-msgstr "Estableix la contrasenya de root"
+msgid "Run config tool"
+msgstr "Executa l'eina de configuració"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr ""
+msgid "Bootloader installation"
+msgstr "Instal·lació del carregador de l'arrencada"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Serveis: %d activats per %d registrats"
+msgid "Root partition size in MB: "
+msgstr "Mida de la partició arrel en MB: "
-#
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Services"
-msgstr "Serveis"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "Aquest paquet és obligatori; no es pot desseleccionar"
-#
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "System"
-msgstr "Sistema"
-
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "%s on %s"
-msgstr "Port"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Bootloader"
-msgstr "Carregador de l'arrencada a utilitzar"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Boot"
-msgstr "Arrel"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "disabled"
-msgstr "inhabilita"
+msgid "Etherboot ISO image is %s"
+msgstr "La imatge ISO per a Etherboot és %s"
#
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "activated"
-msgstr "Activa'l ara"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Firewall"
-msgstr "Tallafoc/Encaminador"
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"named (BIND) és un servidor de noms de domini (DNS) que s'utilitza per "
+"convertir noms d'ordinadors centrals en adreces IP."
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Security"
-msgstr "Seguretat"
+msgid "Disconnect..."
+msgstr "Desconnecta..."
-#
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Security Level"
-msgstr "Nivell de seguretat:"
+#: ../../lang.pm:1
+#, c-format
+msgid "Saint Lucia"
+msgstr "Saint Lucia"
#
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Network"
-msgstr "Xarxa"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Network & Internet"
-msgstr "Interfície de la xarxa"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Graphical interface"
-msgstr "Interfície gràfica a l'inici"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Hardware"
-msgstr "HardDrake"
+msgid "Report"
+msgstr "Informa"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "TV card"
-msgstr "Targeta de TV"
+msgid "Palau"
+msgstr "Palau"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"No s'ha detectat cap targeta de so. Proveu amb \"harddrake\" després de la "
-"instal·lació"
+msgid "level"
+msgstr "nivell"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
msgstr ""
-"Executeu \"sndconfig\" després de la instal·lació per configurar la targeta "
-"de so"
-
-#
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "Teniu una targeta de so ISA?"
+"Cada incident serà investigat per un expert tècnic qualificat de "
+"MandrakeSoft."
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Sound card"
-msgstr "Targeta de so"
+msgid "Package Group Selection"
+msgstr "Selecció del grup de paquets"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Remote CUPS server"
-msgstr "Servidor CUPS remot"
+msgid "Restore Via Network Protocol: %s"
+msgstr "Restaura mitjançant el protocol de xarxa: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "No printer"
-msgstr "Cap impressora"
+msgid "You can configure each parameter of the module here."
+msgstr "Ara podeu configurar cada paràmetre del mòdul."
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Printer"
-msgstr "Impressora"
+msgid "Choose the resolution and the color depth"
+msgstr "Escolliu la resolució i la profunditat de color"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Mouse"
-msgstr "Ratolí"
+msgid "Emulate third button?"
+msgstr "Voleu emular el tercer botó?"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Timezone"
-msgstr "Fus horari"
+msgid ""
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
+msgstr ""
+"No podeu crear una nova partició\n"
+"(perquè heu arribat al màxim nombre de particions primàries).\n"
+"Esborreu primer una partició primària i creeu una partició ampliada."
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Keyboard"
-msgstr "Teclat"
+msgid "Mount"
+msgstr "Munta"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Summary"
-msgstr "Resum"
+msgid "Creating auto install floppy"
+msgstr "S'està creant el disquet d'instal·lació automàtica"
#
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NTP Server"
-msgstr "Servidor NTP"
+#: ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Install updates"
+msgstr "Instal·la actualitzacions del sistema"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Sincronització automàtica de la hora (usant NTP)"
+msgid "text box height"
+msgstr "alçària de la caixa de text"
#
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "El rellotge del vostre ordinador està regulat per GMT"
+msgid "State"
+msgstr "Estat"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Which is your timezone?"
-msgstr "En quina zona horària us trobeu?"
-
-#
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Would you like to try again?"
-msgstr "Voleu configurar la impressió?"
+msgid "Be sure a media is present for the device %s"
+msgstr "Assegureu-vos que hi ha un suport al dispositiu %s"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Unable to contact mirror %s"
-msgstr "No es pot bifurcar: %s"
+#: ../../any.pm:1
+#, c-format
+msgid "Enable multiple profiles"
+msgstr "Habilita perfils múltiples"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
msgstr ""
-"S'està contactant amb la rèplica per obtenir la llista dels paquets "
-"disponibles..."
+"Aquestes opcions poden fer còpia de seguretat i restaurar tots els fitxers "
+"del directory /etc.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Escolliu una rèplica des de la qual aconseguir els paquets"
+msgid "Local printer"
+msgstr "Impressora local"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Files Restored..."
+msgstr "S'han restaurat els fitxers..."
#
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr ""
-"S'està contactant amb el servidor Mandrake Linux per obtenir la llista de "
-"rèpliques disponibles..."
+msgid "Package selection"
+msgstr "Selecció de paquets"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Mauritania"
+msgstr "Mauritània"
+
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
"\n"
-"Do you want to install the updates ?"
msgstr ""
-"Ara teniu l'oportunitat de baixar paquets actualitzats. Aquests paquets\n"
-"han estat publicats després del llançament de la distribució. Poden "
-"contenir\n"
-"actualitzacions de seguretat o correccions d'errors.\n"
+"Podeu conservar la configuració actual i assumir que ja heu definit un "
+"servidor DHCP. En aquest cas, verifiqueu que s'ha llegit correctament la "
+"xarxa de classe C que utilitzeu per a la vostra xarxa local. No es "
+"reconfigurarà ni es modificarà la configuració del servidor DHCP.\n"
"\n"
-"Per baixar aquests paquets, necessitareu tenir una connexió a Internet\n"
-"operativa.\n"
+"L'entrada DNS per defecte és el servidor de noms amb memòria cau que s'ha "
+"configurat al tallafoc. Podeu substituir-lo, per exemple, per la IP del DNS "
+"del vostre proveïdor d'accés.\n"
+"\n"
+"Alternativament, podeu reconfigurar la interfície i (re)configurar un "
+"servidor DHCP per a ús propi.\n"
"\n"
-"Voleu instal·lar aquestes actualitzacions?"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Inseriu el disquet d'Actualització de Mòduls a la unitat %s"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Inseriu el disquet d'arrencada utilitzat a la unitat %s"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Post-install configuration"
-msgstr "Configuració posterior a la instal·lació"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Installing package %s\n"
-"%d%%"
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
msgstr ""
-"S'està instal·lant el paquet %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Preparing installation"
-msgstr "S'està preparant la instal·lació"
+"No s'ha trobat cap impressora! Per instal·lar-ne una manualment entreu el "
+"dispositiu/fitxer a la línia d'entrada (Ports Paral·lel: /dev/lp0, /dev/lp1, "
+"etc., equivalents a LPT1:, LPT2:, etc.; 1a impresora USB: /dev/usb/lp0, 2a "
+"impressora USB: /dev/usb/lp1, etc.)."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM etiquetat com \"%s\""
+msgid "All primary partitions are used"
+msgstr "S'utilitzen totes les particions primàries"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
msgstr ""
-"Si teniu tots els CD de la llista de sota, feu clic a 'D'acord'.\n"
-"Si no teniu cap d'aquests CD, feu clic a 'Cancel·la'.\n"
-"Si només falten alguns CD, desseleccioneu-los i feu clic a 'D'acord'."
-
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
-#, c-format
-msgid "All"
-msgstr "Tots"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Instal·lació realment mínima (especialment no urpmi)"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Amb la documentació bàsica (recomanat!)"
-
-#
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "With X"
-msgstr "Amb X"
+"Després d'això, és recomanable que reinicieu l'entorn X per\n"
+"evitar problemes deguts al canvi de nom de l'ordinador central."
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
+msgid "Automatic detection and configuration of hardware at boot."
msgstr ""
-"No heu seleccionat cap grup de paquets.\n"
-"Escolliu la instal·lació mínima que voleu:"
-
-#
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Type of install"
-msgstr "Tipus d'instal·lació"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Selected size is larger than available space"
-msgstr "La mida seleccionada és superior a la disponible"
+"Detecció i configuració automàtica de maquinari en iniciar l'ordinador."
#
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "Inseriu un disquet amb la selecció de paquets"
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Installation Server Configuration"
+msgstr "Configuració del servidor dhcpd"
-#
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Loading from floppy"
-msgstr "S'està carregant des del disquet"
+msgid "Configuring IDE"
+msgstr "S'està configurant l'IDE"
#
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Package selection"
-msgstr "Selecció de paquets"
+msgid "Network functionality not configured"
+msgstr "La funcionalitat de xarxa no ha estat configurada"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Save on floppy"
-msgstr "Desa al disquet"
+msgid "Configure module"
+msgstr "Configura el mòdul"
-#
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Load from floppy"
-msgstr "Carrega des del disquet"
+msgid "Cocos (Keeling) Islands"
+msgstr "Illes Cocos (Keeling)"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Si us plau, carregueu o deseu la selecció de paquets en el disquet.\n"
-"El format és el mateix que en els disquets generats d'instal·lació "
-"automàtica."
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnecting from the Internet "
+msgstr "Connecta't a Internet"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+msgid "You'll need to reboot before the modification can take place"
msgstr ""
-"Al vostre sistema no li queda prou espai per a la instal·lació o "
-"actualització (%d > %d)"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Looking for available packages..."
-msgstr "S'estan cercant els paquets disponibles..."
+"Us caldrà tornar a arrencar per tal que les modificacions tinguin efecte"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "S'estan cercant els paquets a actualitzar"
+msgid "Provider phone number"
+msgstr "Número de telèfon del proveïdor"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Looking at packages already installed..."
-msgstr "S'estan cercant els paquets ja instal·lats..."
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Host %s"
+msgstr "Nom de l'ordinador central"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr ""
-"S'estan cercant els paquets disponibles i reconstruint la base de dades "
-"d'rpm..."
+msgid "Armenia"
+msgstr "Armènia"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr ""
-"No hi ha prou espai d'intercanvi per completar la instal·lació; si us plau, "
-"afegiu-ne"
+msgid "Fiji"
+msgstr "Fiji"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
msgstr ""
-"És impossible de comprovar el sistema de fitxers %s. Voleu reparar els "
-"errors? (Vigileu, podríeu perdre dades.)"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Check bad blocks?"
-msgstr "Voleu comprovar els blocs incorrectes?"
+msgid "Second floppy drive"
+msgstr "Segona unitat de disquet"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Escolliu les particions que voleu formatar"
+msgid "About Harddrake"
+msgstr "Quant al Harddrake"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
+msgid "Drive capacity"
msgstr ""
-"Us caldrà tornar a arrencar per tal que les modificacions de la taula de "
-"particions tinguin efecte"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
msgstr ""
-"No hi ha prou espai lliure per un 1MB de bootstrap! La instal·lació "
-"continuarà, però per iniciar el sistema necessitareu crear la partició de "
-"bootstrap amb el DiskDrake"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Choose the mount points"
-msgstr "Escolliu els punts de muntatge"
+"Inseriu un disquet a la unitat\n"
+"Se'n perdran totes les dades"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "S'estan explorant les particions per trobar els punts de muntatge"
+msgid "Size: %s"
+msgstr "Mida: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No partition available"
-msgstr "No hi ha particions disponibles"
+msgid "Control and Shift keys simultaneously"
+msgstr "Tecles de Control i de Majúscules simultàniament"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Configuring IDE"
-msgstr "S'està configurant l'IDE"
+msgid "secondary"
+msgstr "secundari"
-#: ../../install_steps_interactive.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "IDE"
-msgstr "IDE"
+msgid "View Backup Configuration."
+msgstr "Visualitza la configuració de la còpia de seguretat"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "S'estan configurant les targetes PCMCIA..."
+msgid "if set to yes, report check result to syslog."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid "No password"
+msgstr "Sense contrasenya"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Button 3 Emulation"
-msgstr "Emulació del botó 3"
+msgid "Nigeria"
+msgstr "Nigèria"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Button 2 Emulation"
-msgstr "Emulació del botó 2"
+msgid "There is no existing partition to use"
+msgstr "No hi ha cap partició que es pugui utilitzar"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Buttons emulation"
-msgstr "Emulació dels botons"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
+msgstr ""
+"\n"
+"Hi ha una impressora desconeguda connectada directament a l'ordinador."
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Si us plau, seleccioneu el port sèrie a què està connectat el ratolí."
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
+msgstr ""
+"Per imprimir a una impressora TCP o Socket, heu d'indicar el nom de xarxa o "
+"la IP de la impressora i, opcionalment, el número de port. En els servidors "
+"HP JetDirect el número del port normalment és el 9100, en els altres pot "
+"variar. Mireu el manual del vostre maquinari."
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mouse Port"
-msgstr "Port del ratolí"
+msgid "Hard drive information"
+msgstr "Informació del disc dur"
-#
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please choose your type of mouse."
-msgstr "Si us plau, seleccioneu el tipus del vostre ratolí."
+msgid "Russian"
+msgstr "Rus"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Encryption key for %s"
-msgstr "Clau de xifratge"
+msgid "Jordan"
+msgstr "Jordània"
#
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Upgrade %s"
-msgstr "Actualitza"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Es tracta d'una instal·lació o d'una actualització?"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Install/Upgrade"
-msgstr "Instal·la/Actualitza"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "Aquesta és la llista completa de teclats disponibles"
+msgid "Hide files"
+msgstr "Fitxers ocults"
#
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Si us plau, seleccioneu la disposició del vostre teclat."
-
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid "Quit"
-msgstr "Surt"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "License agreement"
-msgstr "Acord de llicència"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "An error occurred"
-msgstr "S'ha produït un error"
+msgid "Auto-detect printers connected to this machine"
+msgstr "Detecta automàticament les impressores connectades a aquesta màquina"
-#: ../../install_steps_newt.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
msgstr ""
-" <Tab>/<Alt-Tab> entre elements | <Espai> selecciona | <F12> pant. següent"
-
-#: ../../install_steps_newt.pm:1
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Instal·lació del Mandrake Linux %s"
+"No teniu instal·lat el XawTV!\n"
+"\n"
+"\n"
+"Si teniu una targeta de TV però el DrakX no l'ha detectada (no hi ha el "
+"mòdul\n"
+"bttv o el saa7134 a \"/etc/modules\") o no heu instal·lat xawtv,\n"
+"si us plau envieu els resultats de \"lspcidrake -v -f\"\n"
+"a \"install\\@mandrakesoft.com\" amb l'assumpte \"undetected TV card\".\n"
+"\n"
+"\n"
+"El podeu instal·lar teclejant \"urpmi xawtv\" com a root, en la consola."
-#: ../../install_steps.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "No floppy drive available"
+msgid "Sorry, no floppy drive available"
msgstr "No hi ha cap unitat de disquet disponible"
-#: ../../install_steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Welcome to %s"
-msgstr "Benvingut a %s"
+msgid "Bolivia"
+msgstr "Bolívia"
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
msgstr ""
-"Alguns paquets importants no s'han instal·lat correctament.\n"
-"La vostra unitat de CD-ROM, o bé el CD-ROM, són defectuosos.\n"
-"Comproveu el CD-ROM en un ordinador instal·lat mitjançant \"rpm -qpl "
-"Mandrake/RPMS/*.rpm\"\n"
+"Configureu el vostre servidor Windows per tal que la impressora estigui "
+"disponible sota el protocol IPP i configureu la impressió en aquest "
+"ordinador amb el tipus de connexió \"%s\" en el Printerdrake.\n"
+"\n"
-#: ../../install_steps.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duplica el punt de muntatge %s"
+msgid "Bad package"
+msgstr "Paquet incorrecte"
-#: ../../install_steps.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
msgstr ""
-"S'ha produït un error, però no sé com gestionar-lo correctament.\n"
-"Si continueu, és sota la vostra responsabilitat."
-
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Please wait"
-msgstr "Espereu si us plau"
-
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
-#, c-format
-msgid "Ok"
-msgstr "D'acord"
-
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
-#, c-format
-msgid "Finish"
-msgstr "Fi"
-
-#: ../../interactive.pm:1 ../../standalone/draksec:1
-#, c-format
-msgid "Basic"
-msgstr "Bàsic"
+"Transformeu el vostre ordinador en un potent servidor Linux amb només uns "
+"quants clics del ratolí: servidor Web, correu electrònic, tallafoc, "
+"encaminador, servidor de fitxers i d'impressió..."
-#: ../../interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Advanced"
-msgstr "Avançat"
-
-#
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#, fuzzy, c-format
-msgid "Remove"
-msgstr "Esborra la llista"
+msgid "DrakSec Basic Options"
+msgstr "Opcions bàsiques del DrakSec"
-#
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Modify"
-msgstr "Modifica"
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program. Just type \"sndconfig\" in a console."
+msgstr ""
+"\n"
+"\n"
+"\n"
+"Nota: si teniu una targeta de so ISA PnP, haureu de fer servir el programa "
+"sndconfig. Només cal que teclegeu \"sndconfig\" a la consola."
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add"
-msgstr "Afegeix"
+msgid "Romania"
+msgstr "Romania"
#
-#: ../../interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Choose a file"
-msgstr "Trieu un fitxer"
+msgid "choose device"
+msgstr "escolliu un dispositiu"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
-msgstr ""
-"Aquí podeu triar la tecla o la combinació de tecles que \n"
-"permetran canviar entre diferents disposicions de teclat\n"
-"(p.ex.: llatina i no llatina)"
+msgid "Canada"
+msgstr "Canadà"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Right \"Windows\" key"
-msgstr "Tecla de \"Windows\" Dreta"
+msgid "Remove from LVM"
+msgstr "Elimina de l'LVM"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Left \"Windows\" key"
-msgstr "Tecla de \"Windows\" Esquerra"
+msgid "Timezone"
+msgstr "Fus horari"
#: ../../keyboard.pm:1
#, c-format
-msgid "\"Menu\" key"
-msgstr "tecla de \"Menú\""
+msgid "German"
+msgstr "Alemany"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Tecles d'Alternativa i de Majúscules simultàniament"
+msgid "Next ->"
+msgstr "Següent ->"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Tecles de Control i d'Alternativa simultàniament"
+msgid ""
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
+msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "CapsLock key"
-msgstr "Tecla de Fixació de Majúscules"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
+msgstr ""
+"\n"
+"És possible que aquesta partició sigui\n"
+"una partició de Controladors;\n"
+"és millor que no la toqueu.\n"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Tecles de Control i de Majúscules simultàniament"
+msgid "Guinea-Bissau"
+msgstr "Guinea Bissau"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "Les dues tecles de Majúscules simultàniament"
+msgid "Horizontal refresh rate"
+msgstr "Velocitat de refresc horitzontal"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Right Alt key"
-msgstr "Tecla d'Alternativa Gràfica"
+msgid ""
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
+msgstr ""
+"No es pot anul·lar el punt de muntatge, perquè aquesta partició\n"
+"s'utilitza per al loopback. Elimineu primer el loopback"
-#
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Yugoslavian (latin)"
-msgstr "Iugoslau (llatí)"
+msgid ""
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
+msgstr ""
+"La configuració de xarxa feta durant la instal·lació no s'ha pogut iniciar "
+"ara. Comproveu si la xarxa es torna accessible després de reiniciar el "
+"sistema i corregiu la configuració utilitzant el Centre de Control Mandrake, "
+"a la secció \"Xarxa & Internet\"/\"Connexió\", i després configureu la "
+"impressora, també usant el Centre de Control Mandrake, secció \"Maquinari\"/"
+"\"Impressores\""
-#: ../../keyboard.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamita \"fila numèrica\" QWERTY"
+msgid "USB controllers"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "US keyboard (international)"
-msgstr "Teclat Estats Units (internacional)"
+msgid "What norm is your TV using?"
+msgstr "Quina norma segueix el vostre televisor?"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "US keyboard"
-msgstr "Teclat Estats Units"
+msgid "Type:"
+msgstr "Tipus:"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "UK keyboard"
-msgstr "Teclat Regne Unit"
+msgid "Share name"
+msgstr "Nom de compartició"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Ukrainian"
-msgstr "Ucraïnès"
+msgid "enable"
+msgstr "habilita"
-#: ../../keyboard.pm:1
+#
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turc (modern, model \"Q\")"
+msgid ""
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
+msgstr ""
+"S'està contactant amb el servidor Mandrake Linux per obtenir la llista de "
+"rèpliques disponibles..."
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turc (tradicional, model \"F\")"
+msgid ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
+msgstr ""
+"S'ha produït un problema en reiniciar la xarxa: \n"
+"\n"
+"%s"
#
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Tajik keyboard"
-msgstr "Teclat tadjik"
+msgid "Remove the loopback file?"
+msgstr "Voleu suprimir el fitxer de loopback?"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Thai keyboard"
-msgstr "Teclat tai"
+msgid "Selected size is larger than available space"
+msgstr "La mida seleccionada és superior a la disponible"
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "Armeni (màquina d'escriure)"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "NCP server name missing!"
+msgstr "Falta el nom del Servidor NCP!"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr "Tamil (TSCII)"
+msgid "Please choose your country."
+msgstr "Si us plau, seleccioneu el tipus del vostre ratolí."
#
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Serbian (cyrillic)"
-msgstr "Serbi (ciríl·lic)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Eslovac (QWERTY)"
-
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Eslovac (QWERTZ)"
+msgid "Hard Disk Backup files..."
+msgstr "Còpies de seguretat del disc dur..."
+#
#: ../../keyboard.pm:1
#, c-format
-msgid "Slovenian"
-msgstr "Eslovè"
+msgid "Laotian"
+msgstr "Laosí"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Swedish"
-msgstr "Suec"
+msgid "Samoa"
+msgstr "Samoa"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Russian (Yawerty)"
-msgstr "Rus (Yawerty)"
+msgid ""
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
+msgstr ""
+"El protocol rstat permet que els usuaris d'una xarxa recuperin\n"
+"mesures de rendiment de qualsevol ordinador de la mateixa."
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Russian"
-msgstr "Rus"
+msgid "Re-generating list of configured scanners ..."
+msgstr ""
#
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Romanian (qwerty)"
-msgstr "Romanès (qwerty)"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Scanner"
+msgstr "Seleccioneu un escàner"
-#
-#: ../../keyboard.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Romanian (qwertz)"
-msgstr "Romanès (qwertz)"
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr ""
+"Avís: la comprovació d'aquesta targeta gràfica pot penjar-vos l'ordinador"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Canadian (Quebec)"
-msgstr "Canadenc (Quebec)"
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr ""
+"El nom d'usuari només pot contenir lletres en minúscula, números, '-' i '_'"
-#: ../../keyboard.pm:1
+#
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Portuguese"
-msgstr "Portuguès"
+msgid "Menudrake"
+msgstr "Menudrake"
-#: ../../keyboard.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Polonès (disposició qwertz)"
+msgid "Welcome To Crackers"
+msgstr "Benvinguts, crackers"
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Polonès (disposició qwerty)"
+msgid "Module options:"
+msgstr "Opcions del mòdul:"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Norwegian"
-msgstr "Noruec"
+msgid "Secure your networks with the Multi Network Firewall"
+msgstr ""
-#: ../../keyboard.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Dutch"
-msgstr "Holandès"
+msgid "Go on without configuring the network"
+msgstr "Continua sense configurar la xarxa"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Maltese (US)"
-msgstr "Maltès (Estats Units)"
+msgid "Abort"
+msgstr "Abandona"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Maltese (UK)"
-msgstr "Maltès (Regne Unit)"
+msgid "No password prompt on %s at port %s"
+msgstr "No es demana cap contrasenya a %s en el port %s"
-#
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Mongol (ciríl·lic)"
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "Marqueu aquesta opció si voleu emprar el dispositiu no rebobinable."
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Myanmar (Burmese)"
-msgstr "Myanmar (Burmese)"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Usage of remote scanners"
+msgstr "Utilitza l'espai lliure"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Macedonian"
-msgstr "Macedoni"
+msgid "\t-CDROM.\n"
+msgstr "\t-CDROM.\n"
-#: ../../keyboard.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Malayalam"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
msgstr ""
+"La partició de Windows està massa fragmentada. Si us plau, reinicieu "
+"l'ordinador sota Windows i executeu l'eina \"defrag\". Llavors, torneu a "
+"començar la instal·lació del Mandrake Linux."
-#
#: ../../keyboard.pm:1
#, c-format
-msgid "Latvian"
-msgstr "Letó"
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak (Noruec)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituà \"fonètic\" QWERTY"
+msgid "Hard Disk Backup Progress..."
+msgstr "Progrés de la còpia de seguretat del disc dur..."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituà \"fila de números\" QWERTY"
+msgid "Unable to fork: %s"
+msgstr "No es pot bifurcar: %s"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituà AZERTY (nou)"
+msgid "Type: "
+msgstr "Tipus: "
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituà AZERTY (antic)"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "<-- Edit Client"
+msgstr "<-- Suprimeix un client"
#
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Laotian"
-msgstr "Laosí"
+msgid "no fonts found"
+msgstr "no s'han trobat fonts"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Latin American"
-msgstr "Espanyol sud-americà"
+msgid "Mouse"
+msgstr "Ratolí"
-#: ../../keyboard.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Korean keyboard"
-msgstr "Teclat coreà"
+msgid "not enough room in /boot"
+msgstr "no hi ha prou espai a /boot"
-#: ../../keyboard.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Japanese 106 keys"
-msgstr "Japonès de 106 tecles"
+msgid "Choosing an arbitratry driver"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Inuktitut"
-msgstr "Inuktitut"
+msgid "Host name"
+msgstr "Nom de l'ordinador central"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Italian"
-msgstr "Italià"
+msgid "Liechtenstein"
+msgstr "Liechtenstein"
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Icelandic"
-msgstr "Islandès"
+msgid "the color of the progress bar"
+msgstr "el color de la barra de progrés"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Iranian"
-msgstr "Iranià"
+msgid "Suppress Fonts Files"
+msgstr "Suprimeix els fitxers de fonts"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "Israelià (fonètic)"
+msgid "Add to RAID"
+msgstr "Afegeix al RAID"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Israeli"
-msgstr "Israelià"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
+"Podeu afegir entrades addicionals per al yaboot, ja sigui per a altres\n"
+"sistemes operatius, nuclis alternatius, o per a una imatge per a arrencades\n"
+"d'emergència.\n"
+"\n"
+"Per a altres SO, l'entrada només consta d'una etiqueta i de la partició "
+"arrel.\n"
+"\n"
+"Per al Linux, hi ha unes quantes opcions possibles: \n"
+"\n"
+" * Etiqueta: és només el nom a entrar en l'indicador del yaboot per\n"
+"seleccionar aquesta opció d'arrencada.\n"
+"\n"
+" * Imatge: el nom del nucli a arrencar. Normalment, vmlinux o una\n"
+"variació de vmlinux amb una extensió.\n"
+"\n"
+" * Arrel: el dispositiu arrel o '/' per a la instal·lació del Linux.\n"
+"\n"
+" * Addició: en maquinari Apple, l'opció d'addició de nuclis s'utilitza\n"
+"força sovint per auxiliar en la inicialització de maquinari de vídeo o per\n"
+"habilitar l'emulació del botó del ratolí de teclat per als 2n i 3r botons,\n"
+"que sovint no existeixen en un ratolí Apple convencional. Alguns exemples\n"
+"d'això són:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: aquesta opció es pot utilitzar per carregar els mòduls inicials,\n"
+"abans que el dispostiu d'arrencada estigui disponible, o per carregar\n"
+"una imatge de disc RAM en una situació d'arrencada d'emergència.\n"
+"\n"
+" * Mida de l'Initrd: la mida per defecte del disc RAM sol ser de 4096 "
+"bytes.\n"
+"Si necessiteu assignar un disc RAM gran, podeu utilitzar aquesta opció.\n"
+"\n"
+" * Lectura-Escriptura: normalment, la partició arrel '/' es tracta "
+"inicialment com\n"
+"de només lectura per permetre una comprovació del sistema de fitxers abans\n"
+"que el sistema esdevingui \"viu\". Podeu substituir aquesta opció aquí.\n"
+"\n"
+" * Sense Vídeo: en cas que el maquinari de vídeo d'Apple resulti "
+"especialment\n"
+"problemàtic, podeu seleccionar aquesta opció per arrencar en mode 'no-"
+"vídeo',\n"
+"amb el suport nadiu per a frame buffer.\n"
+"\n"
+" * Per defecte: seleccioneu aquesta entrada com a selecció per defecte del\n"
+"Linux; se selecciona prement simplement Retorn a l'indicador del yaboot.\n"
+"Aquesta opció també es ressaltarà amb un '*' si premeu Tab per veure les\n"
+"seleccions d'arrencada."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Croatian"
-msgstr "Croata"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"S'ha afegit correctament la impressora \"%s\" a Star Office/OpenOffice.org/"
+"GIMP."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Hungarian"
-msgstr "Hongarès"
+msgid "No floppy drive available!"
+msgstr "No s'ha trobat cap unitat de disquet!"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
+msgstr ""
+"Per conèixer les opcions disponibles per a la impressora actual, llegiu la "
+"llista de sota o feu clic al botó \"Imprimeix la llista d'opcions\".%s%s\n"
+"\n"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Gurmukhi"
-msgstr "Gurmukhi"
+msgid "Continue anyway?"
+msgstr "Voleu continuar igualment?"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Gujarati"
-msgstr "Gujarati"
+msgid ""
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
+msgstr ""
+"Si la vostra impressora no és a la llista, escolliu-ne una de compatible "
+"(mireu el manual de la impressora) o una de similar."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Greek"
-msgstr "Grec"
+msgid "Printer"
+msgstr "Impressora"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgià (disposició \"llatina\")"
+msgid "Saudi Arabia"
+msgstr "Aràbia Saudita"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgià (disposició \"russa\")"
+msgid "Internet"
+msgstr "Internet"
-#: ../../keyboard.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "French"
-msgstr "Francès"
+msgid "Some devices were added:\n"
+msgstr "S'han afegit alguns dispositius:\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Finnish"
-msgstr "Finès"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "Geometria: %s cilindres, %s capçals, %s sectors\n"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Spanish"
-msgstr "Espanyol"
+msgid "Printing on the printer \"%s\""
+msgstr "S'està imprimint en la impressora \"%s\""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Estonian"
-msgstr "Estonià"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr ""
#
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Suec)"
+msgid "Restore From Tape"
+msgstr "Restaura des de cinta"
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Noruec)"
+msgid "Choose the profile to configure"
+msgstr "Escolliu el perfil a configurar"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak (Estats Units)"
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
+msgstr ""
-#: ../../keyboard.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Danish"
-msgstr "Danès"
+msgid "Backup Now from configuration file"
+msgstr "Fes la còpia de seguretat des del fitxer de configuració"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Devanagari"
-msgstr "Devanagari"
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
+msgid "Mount points should contain only alphanumerical characters"
+msgstr ""
+"El nom de la impressora només pot constar de lletres, números i el caràcter "
+"de subratllat"
-#: ../../keyboard.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "German (no dead keys)"
-msgstr "Alemany (sense tecles inoperatives)"
+msgid "Restarting printing system..."
+msgstr "S'està reiniciant el sistema d'impressió..."
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "German"
-msgstr "Alemany"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Czech (QWERTY)"
-msgstr "Txec (QWERTY)"
+msgid "See hardware info"
+msgstr "Mira la informació del maquinari"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Czech (QWERTZ)"
-msgstr "Txec (QWERTZ)"
+msgid "First sector of boot partition"
+msgstr "Primer sector de la partició d'arrencada"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Swiss (French layout)"
-msgstr "Suís (disposició francesa)"
+msgid "Printer manufacturer, model"
+msgstr "Fabricant de la impressora, model"
-#: ../../keyboard.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Swiss (German layout)"
-msgstr "Suís (disposició alemanya)"
+msgid "PDQ - Print, Don't Queue"
+msgstr "PDQ - Print, Don't Queue"
-#: ../../keyboard.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Belarusian"
-msgstr "Bielorrús"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Bosnian"
-msgstr "Bosnià"
+msgid "Subnet Mask:"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasiler (ABNT-2)"
+msgid "LiLo and Bootsplash themes installation successfull"
+msgstr "Els temes de LILO i de Bootsplash s'han instal·lat amb èxit"
-#
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Bulgarian (BDS)"
-msgstr "Búlgar (BDS)"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"Els dos paràmetres més importants son la velocitat de refresc vertical, que\n"
+"és la velocitat a què es refresca tota la pantalla, i el més important, la\n"
+"velocitat de sincronització horitzontal, que és la velocitat a què es\n"
+"visualitzen les línies d'exploració.\n"
+"\n"
+"És MOLT IMPORTANT que no especifiqueu un tipus de monitor amb un rang\n"
+"de sincronització superior a les possibilitats del vostre monitor, perquè\n"
+"el podríeu fer malbé.\n"
+"En cas de dubte, sigueu conservador amb aquest paràmetre."
#
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "Búlgar (fonètic)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Bengali"
-msgstr "Bengalí"
+msgid "Modify"
+msgstr "Modifica"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Belgian"
-msgstr "Belga"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
+"\n"
+"Les ordres \"%s\" i \"%s\" també permeten modificar els paràmetres per a un "
+"treball d'impressió concret. Simplement afegiu els paràmetres que vulgueu a "
+"la línia d'ordres, p.ex. \"%s <fitxer>\".\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjanès (llatí)"
+msgid "Need hostname, username and password!"
+msgstr ""
+"Cal introduir el nom de l'ordinador central, el nom d'usuari i la "
+"contrasenya!"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Arabic"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
msgstr ""
+"WebDAV és un protocol que permet muntar un directori d'un servidor web\n"
+"localment, i tractar-lo com si fos un sistema de fitxers local (amb el "
+"benentès\n"
+"que el servidor web està configurat com a servidor WebDAV). Si voleu afegir\n"
+"punts de muntatge WebDAV, seleccioneu \"Nou\"."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Armenian (phonetic)"
-msgstr "Armeni (fonètic)"
+msgid "HardDrake"
+msgstr "HardDrake"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Armenian (typewriter)"
-msgstr "Armeni (màquina d'escriure)"
+msgid "new"
+msgstr "nou"
-#: ../../keyboard.pm:1
+#
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Would you like to try again?"
+msgstr "Voleu configurar la impressió?"
+
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Armenian (old)"
-msgstr "Armeni (antic)"
+msgid "Wizard"
+msgstr "Auxiliar"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Edit selected server"
+msgstr "s'ha detectat %s"
#
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Albanian"
-msgstr "Albanès"
+msgid "Please choose where you want to backup"
+msgstr "Si us plau, escolliu on voleu fer la còpia de seguretat"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Polish"
-msgstr "Polonès"
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr ""
+"Us caldrà tornar a arrencar per tal que les modificacions de la taula de "
+"particions tinguin efecte"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Dvorak"
-msgstr "Dvorak"
+msgid "Do not include the browser cache"
+msgstr "No incloguis la memòria cau del navegador"
-#: ../../lang.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Zimbabwe"
-msgstr "Zimbabwe"
+msgid "Please, choose your keyboard layout."
+msgstr "Si us plau, seleccioneu la disposició del vostre teclat."
-#: ../../lang.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
-msgid "Zambia"
-msgstr "Zàmbia"
+msgid "Standard"
+msgstr "Estàndard"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "South Africa"
-msgstr "Sud-àfrica"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Serbia"
-msgstr "sèrie"
+msgid "Please choose your mouse type."
+msgstr "Si us plau, seleccioneu el tipus del vostre ratolí."
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Mayotte"
-msgstr "Mayotte"
+msgid "Connect..."
+msgstr "Connecta..."
-#: ../../lang.pm:1
-#, c-format
-msgid "Yemen"
-msgstr "Iemen"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Failed to configure printer \"%s\"!"
+msgstr "S'està configurant la impressora \"%s\"..."
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "not configured"
+msgstr "torna a configurar"
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Samoa"
-msgstr "Samoa"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Wallis and Futuna"
-msgstr "Illes Wallis i Futuna"
+msgid "About"
+msgstr "Abandona"
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Vanuatu"
-msgstr "Vanuatu"
+msgid "Proxies configuration"
+msgstr "Configuració dels servidors intermediaris (proxies)"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Vietnam"
-msgstr "Vienam"
+#: ../../mouse.pm:1
+#, c-format
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Illes Verge Americanes"
+msgid "Start: sector %s\n"
+msgstr "Inici: sector %s\n"
-#: ../../lang.pm:1
+#
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Virgin Islands (British)"
-msgstr "Illes Verge Britàniques"
+msgid "Network interface already configured"
+msgstr "La intefície de xarxa ja està configurada"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Venezuela"
-msgstr "Veneçuela"
+msgid "Couldn't access the floppy!"
+msgstr "No s'ha pogut accedir al disquet!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "Saint Vincent i les Grenadines"
+msgid "connecting to Bugzilla wizard ..."
+msgstr "s'està connectant amb l'auxiliar de Bugzilla..."
#
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Vatican"
-msgstr "Letó"
-
-#: ../../lang.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Uzbekistan"
-msgstr "Uzbekistan"
+msgid "Mail Server"
+msgstr "Servidor de correu"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Uruguay"
-msgstr "Uruguai"
+msgid "Please click on a partition"
+msgstr "Si us plau, feu clic a una partició "
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "Illes Perifèriques Menors dels EUA"
+msgid "Linux"
+msgstr "Linux"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Uganda"
-msgstr "Uganda"
+msgid "Have a nice day!"
+msgstr "Tingueu un bon dia!"
-#: ../../lang.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Ukraine"
-msgstr "Ucraïna"
+msgid "across Network"
+msgstr "a la xarxa"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Tanzania"
-msgstr ""
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
-#: ../../lang.pm:1
+#
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Taiwan"
-msgstr "Tailàndia"
+msgid "Upgrade %s"
+msgstr "Actualitza"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Tuvalu"
-msgstr "Tuvalu"
+msgid "Select Printer Connection"
+msgstr "Seleccioneu la connexió de la impressora"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Trinitat i Tobago"
+msgid "Scanning for TV channels in progress ..."
+msgstr "La cerca de canals de TV està en progrés..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Turkey"
-msgstr "Turquia"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
+"S'ha produït un error en enviar el fitxer a través d'FTP.\n"
+" Si us plau, corregiu la configuració de l'FTP."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Tonga"
-msgstr "Tonga"
+msgid "IP Range Start:"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Tunisia"
-msgstr "Tunísia"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"El dimoni superservidor d'Internet (conegut normalment com 'inetd') inicia\n"
+"altres serveis d'Internet a mesura que es van necessitant. És el "
+"responsable\n"
+"d'iniciar molts serveis, incloent el telnet, l'ftp, l'rsh i l'rlogin. Si\n"
+"s'inhabilita l'inetd, s'inhabiliten tots els serveis de què és responsable."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Turkmenistan"
-msgstr "Turkmenistan"
+msgid "the height of the progress bar"
+msgstr "l'alçària de la barra de progrés"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "East Timor"
-msgstr "Timor Oriental"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
+"\n"
+"- Desa-ho a través de %s en l'ordinador central: %s\n"
-#: ../../lang.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Tokelau"
-msgstr "Tokelau"
+msgid "Argentina"
+msgstr "Argentina"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Tajikistan"
-msgstr "Tadjikistan"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Thailand"
-msgstr "Tailàndia"
+msgid "Domain Name Server"
+msgstr "Servidor de Noms de Domini (DNS)"
-#: ../../lang.pm:1
+#
+#: ../../standalone/draksec:1
#, c-format
-msgid "Togo"
-msgstr "Togo"
+msgid "Security Level:"
+msgstr "Nivell de seguretat:"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "French Southern Territories"
-msgstr "Territoris francesos del Sud"
+msgid "Mount points must begin with a leading /"
+msgstr "Els punts de muntatge han de començar amb una /"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Chad"
-msgstr "Txad"
+msgid "Postfix Mail Server"
+msgstr "Servidor de correu Postfix"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "Illes Turks i Caicos"
+msgid "Quit without saving"
+msgstr "Surt sense desar"
#: ../../lang.pm:1
#, c-format
-msgid "Swaziland"
-msgstr "Swazilàndia"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Syria"
-msgstr "Surinam"
+msgid "Yemen"
+msgstr "Iemen"
-#: ../../lang.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "El Salvador"
-msgstr "El Salvador"
+msgid "This product is available on the MandrakeStore Web site."
+msgstr "Aquest producte es troba disponible al lloc web de MandrakeStore"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sao Tome and Principe"
-msgstr "Sao Tome i Príncipe"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr ""
+"Si us plau, especifiqueu la mida màxima\n"
+" permesa per a Drakbackup"
-#: ../../lang.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Suriname"
-msgstr "Surinam"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr "=> Hi ha moltes coses per escollir de (%s).\n"
-#: ../../lang.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Somalia"
-msgstr "Somàlia"
+msgid "Hard drive detection"
+msgstr "Detecció del disc dur"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Senegal"
-msgstr "Senegal"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
+"No heu seleccionat cap grup de paquets.\n"
+"Escolliu la instal·lació mínima que voleu:"
-#: ../../lang.pm:1
+#
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "San Marino"
-msgstr "San Marino"
+msgid "Please enter the WebDAV server URL"
+msgstr "Si us plau introduïu l'URL del servidor WebDAV"
#: ../../lang.pm:1
#, c-format
-msgid "Sierra Leone"
-msgstr "Sierra Leone"
+msgid "Tajikistan"
+msgstr "Tadjikistan"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Slovakia"
-msgstr "Eslovàquia"
+msgid "Accept"
+msgstr "Accepta"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Illes Svalbard i Jan Mayen"
+msgid "Description"
+msgstr "Descripció"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Slovenia"
-msgstr "Eslovènia"
+msgid "Error opening %s for writing: %s"
+msgstr "S'ha produït un error en obrir %s per escriure: %s"
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Saint Helena"
-msgstr "Saint Helena"
+msgid "Mouse type: %s\n"
+msgstr "Tipus de ratolí: %s\n"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Singapore"
-msgstr "Singapur"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr ""
+"La vostra targeta pot tenir acceleració 3D de maquinari amb l'Xfree %s."
-#: ../../lang.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sudan"
-msgstr "Sudan"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "Si us plau, escolliu l'espai disponible en el CD/DVD (en MB)"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Seychelles"
-msgstr "Seychelles"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Solomon Islands"
-msgstr "Illes Salomó"
+msgid "Expert Area"
+msgstr "Àrea d'experts"
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Saudi Arabia"
-msgstr "Aràbia Saudita"
+msgid "Choose a monitor"
+msgstr "Escolliu un monitor"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Rwanda"
-msgstr "Rwanda"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Russia"
-msgstr "Rus"
+msgid "Empty label not allowed"
+msgstr "No es permet una etiqueta buida"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Romania"
-msgstr "Romania"
+msgid "Maltese (UK)"
+msgstr "Maltès (Regne Unit)"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Reunion"
-msgstr "Reunion"
+msgid "I can't add any more partition"
+msgstr "No es pot afegir cap més partició"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Qatar"
-msgstr "Qatar"
+msgid "Size in MB: "
+msgstr "Mida en MB: "
-#: ../../lang.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Palau"
-msgstr "Palau"
+msgid "Remote printer"
+msgstr "Impressora remota"
-#: ../../lang.pm:1
+#
+#: ../../any.pm:1
#, c-format
-msgid "Paraguay"
-msgstr "Paraguai"
+msgid "Please choose a language to use."
+msgstr "Si us plau, trieu un idioma per utilitzar."
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Portugal"
-msgstr "Portugal"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
+"ATENCIÓ: Aquest dispositiu ja es va configurar per connectar-se a Internet.\n"
+"Només cal que accepteu per mantenir-lo configurat.\n"
+"Si modifiqueu els camps inferiors, sobreescriureu aquesta configuració."
-#: ../../lang.pm:1
+#
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Palestine"
-msgstr "Selecció del camí"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Puerto Rico"
-msgstr "Puerto Rico"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Pitcairn"
-msgstr "Pitcairn"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "Saint Pierre i Miquelon"
+msgid "I can set up your computer to automatically log on one user."
+msgstr ""
+"Puc configurar el vostre ordinador de manera que entri automàticament amb un "
+"nom d'usuari.\n"
+"Voleu activar aquesta característica?"
-#: ../../lang.pm:1
-#, c-format
-msgid "Poland"
-msgstr "Polònia"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Floppy format"
+msgstr "Formata"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Pakistan"
-msgstr "Pakistan"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
+msgstr ""
-#: ../../lang.pm:1
+#
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Philippines"
-msgstr "Filipines"
+msgid "Generic Printers"
+msgstr "Impressores genèriques"
-#: ../../lang.pm:1
-#, c-format
-msgid "Papua New Guinea"
-msgstr "Papua Nova Guinea"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
+msgstr ""
+"Escolliu el port al qual està connectada la impressora o escriviu el nom de "
+"dispositiu/nom de fitxer en la línia d'entrada"
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "French Polynesia"
-msgstr "Polinèsia francesa"
+msgid "The scanners on this machine are available to other computers"
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Peru"
-msgstr "Perú"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "First sector of the root partition"
+msgstr "Primer sector de la partició d'arrencada"
-#: ../../lang.pm:1
+#
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Panama"
-msgstr "Panamà"
+msgid "Alternative drivers"
+msgstr "Controladors alternatius"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Oman"
-msgstr "Oman"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
+"\n"
+"Si us plau, marqueu totes les opcions que us calguin.\n"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "New Zealand"
-msgstr "Nova Zelanda"
+msgid "Initrd"
+msgstr "Initrd"
#: ../../lang.pm:1
#, c-format
-msgid "Niue"
-msgstr "Niue"
+msgid "Cape Verde"
+msgstr "Cap Verd"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Nauru"
-msgstr "Nauru"
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Nepal"
-msgstr "Nepal"
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Nicaragua"
-msgstr "Nicaragua"
+msgid "Guam"
+msgstr "Guam"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Nigeria"
-msgstr "Nigèria"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
+msgstr ""
+"Escolliu el port al qual està connectada la impressora o escriviu el nom de "
+"dispositiu/nom de fitxer en la línia d'entrada"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Norfolk Island"
-msgstr "Illa Norfolk"
+msgid "/Options/Test"
+msgstr "/Opcions/Prova"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Niger"
-msgstr "Níger"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+"Aquest nivell s'ha d'utilitzar amb cura. Fa el vostre sistema molt més "
+"fàcil\n"
+"d'utilitzar, però també molt sensible: no s'ha d'utilitzar en un ordinador\n"
+"connectat a d'altres o a Internet. No cal contrasenya per accedir-hi."
-#: ../../lang.pm:1
-#, c-format
-msgid "New Caledonia"
-msgstr "Nova Caledònia"
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid "Mounting partition %s"
+msgstr "S'està formatant la partició %s"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Namibia"
-msgstr "Namíbia"
+msgid "User name"
+msgstr "Nom d'usuari"
-#: ../../lang.pm:1
+#
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Mozambique"
-msgstr "Moçambic"
+msgid "New configuration (isdn-light)"
+msgstr "Nova configuració (isdn-light)!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Malaysia"
-msgstr "Malàisia"
+msgid "Userdrake"
+msgstr "Userdrake"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Mexico"
-msgstr "Mèxic"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "Quina partició voleu utilitzar per al Linux4Win?"
-#: ../../lang.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Malawi"
-msgstr "Malawi"
+msgid "Backup system"
+msgstr "Còpia de seguretat del sistema"
-#: ../../lang.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Maldives"
-msgstr "Maldives"
+msgid "Test pages"
+msgstr "Pàgines de prova"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mauritius"
-msgstr "Maurici"
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
+"Llista de dades per restaurar:\n"
+"\n"
-#: ../../lang.pm:1
-#, c-format
-msgid "Malta"
-msgstr "Malta"
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid "Checking %s"
+msgstr "S'està copiant %s"
-#: ../../lang.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Montserrat"
-msgstr "Montserrat"
+msgid "TCP/Socket Printer Options"
+msgstr "Opcions de la impressora per a TCP/Socket"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Mauritania"
-msgstr "Mauritània"
+msgid "Card mem (DMA)"
+msgstr "Targeta de memòria (DMA)"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Martinique"
-msgstr "Martinica"
+msgid "France"
+msgstr "França"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Northern Mariana Islands"
-msgstr "Illes Marianes del Nord"
+msgid "browse"
+msgstr "navega"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mongolia"
-msgstr "Mongòlia"
+msgid "Checking installed software..."
+msgstr "S'està comprovant el programari instal·lat..."
-#: ../../lang.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Myanmar"
-msgstr "Myanmar"
+msgid "Remote printer name missing!"
+msgstr "Falta el nom de la impressora remota!"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mali"
-msgstr "Mali"
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "Voleu habilitar la impressió a les impressores de la xarxa local?\n"
#: ../../lang.pm:1
#, c-format
-msgid "Macedonia"
-msgstr "Macedònia"
+msgid "Turkey"
+msgstr "Turquia"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Marshall Islands"
-msgstr "Illes Marshall"
+msgid "Alcatel speedtouch usb"
+msgstr "Alcatel Speedtouch USB"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Madagascar"
-msgstr "Madagascar"
+msgid "Number of buttons"
+msgstr "Nombre de botons"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Moldova"
-msgstr "Moldàvia"
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Vietnamita \"fila numèrica\" QWERTY"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Monaco"
-msgstr "Mònaco"
+msgid "Module"
+msgstr "Mòdul"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Morocco"
-msgstr "Marroc"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
+msgstr ""
+"A més, les cues que no han estat creades amb aquest programa o amb "
+"\"foomatic-configure\" no es poden transferir."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Libya"
-msgstr "Libèria"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Latvia"
-msgstr "Letònia"
+msgid "Hardware"
+msgstr "HardDrake"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Luxembourg"
-msgstr "Luxemburg"
+msgid "Ctrl and Alt keys simultaneously"
+msgstr "Tecles de Control i d'Alternativa simultàniament"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Lithuania"
-msgstr "Lituània"
+msgid "United States"
+msgstr "Estats Units"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Lesotho"
-msgstr "Lesotho"
+msgid "Default OS?"
+msgstr "SO per defecte?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Liberia"
-msgstr "Libèria"
+msgid "Swiss (German layout)"
+msgstr "Suís (disposició alemanya)"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Sri Lanka"
-msgstr "Sri Lanka"
+msgid "Configure all heads independently"
+msgstr "Configura tots els capçals independentment"
-#: ../../lang.pm:1
-#, c-format
-msgid "Liechtenstein"
-msgstr "Liechtenstein"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr ""
+"Aquí teniu una llista de les impressores que s'han detectat. Escolliu la "
+"impressora que voleu configurar. La configuració de la impressora es farà "
+"automàticament. Si la vostra impressora no ha estat correctament detectada o "
+"si preferiu personalitzar la seva configuració, habiliteu \"Configuració "
+"manual\"."
-#: ../../lang.pm:1
+#
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Saint Lucia"
-msgstr "Saint Lucia"
+msgid "NTP Server"
+msgstr "Servidor NTP"
-#: ../../lang.pm:1
+#
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Lebanon"
-msgstr "Líban"
+msgid "Load/Save on floppy"
+msgstr "Carrega/Desa al disquet"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Laos"
+msgid "This theme does not yet have a bootsplash in %s !"
msgstr ""
+"Aquest tema encara no té cap pantalla de presentació de l'arrencada en %s!"
-#: ../../lang.pm:1
-#, c-format
-msgid "Kazakhstan"
-msgstr "Kazakhstan"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Cayman Islands"
-msgstr "Illes Caiman"
-
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Kuwait"
-msgstr "Kuwait"
+msgid "nice"
+msgstr "bonic"
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
#, fuzzy, c-format
-msgid "Korea"
-msgstr "Més"
+msgid "Leaving in %d seconds"
+msgstr "%d segons"
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Korea (North)"
+msgid "Please choose which serial port your modem is connected to."
msgstr ""
+"Si us plau, seleccioneu el port sèrie al qual teniu connectat el mòdem."
-#: ../../lang.pm:1
-#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "Saint Christopher i Nevis"
-
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Comoros"
-msgstr "Comores"
+msgid "Country"
+msgstr "País"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Kiribati"
-msgstr "Kiribati"
+msgid "Property"
+msgstr "Propietat"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Cambodia"
-msgstr "Cambodja"
+msgid "Ghostscript"
+msgstr "Ghostscript"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Kyrgyzstan"
-msgstr "Kirguizistan"
+msgid "LAN Configuration"
+msgstr "Configuració de la LAN"
#: ../../lang.pm:1
#, c-format
-msgid "Kenya"
-msgstr "Kenya"
+msgid "Ghana"
+msgstr "Ghana"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Japan"
-msgstr "Japó"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Jordan"
-msgstr "Jordània"
+msgid "Path or Module required"
+msgstr "El camí o el mòdul són necessaris"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Jamaica"
-msgstr "Jamaica"
+msgid "Advanced Options"
+msgstr "Opcions avançades"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Iceland"
-msgstr "Islàndia"
+msgid "Coma bug"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Iran"
-msgstr "Iraq"
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
+"Ara és quan heu de decidir quina(es) partició(ns) voleu utilitzar per\n"
+"instal·lar el sistema Mandrake Linux. Si ja s'han definit les particions\n"
+"(en una instal·lació anterior de GNU/Linux o mitjançant una altra eina de\n"
+"particionament), podeu utilitzar les particions existents. En cas contrari,\n"
+"s'han de definir particions al disc dur.\n"
+"\n"
+"Per crear particions, primer heu de seleccionar un disc dur. Podeu "
+"seleccionar\n"
+"el disc que s'ha de particionar fent clic a \"hda\" per a la primera unitat\n"
+"IDE, \"hdb\" per a la segona o \"sda\" per a la primera unitat SCSI, etc.\n"
+"\n"
+"Per particionar el disc dur seleccionat, podeu utilitzar aquestes opcions:\n"
+"\n"
+" * \"Buida-ho tot\": aquesta opció suprimeix totes les particions que hi "
+"ha\n"
+"al disc dur seleccionat.\n"
+"\n"
+" * \"Assignació automàtica\": aquesta opció us permet crear automàticament "
+"les\n"
+"particions \"Ext2\" i Intercanvi en l'espai lliure del disc dur.\n"
+"\n"
+"\"Més\": dóna accés a funcions addicionals:\n"
+"\n"
+" * \"Desa la taula de particions\": desa la taula de particions en un "
+"disquet.\n"
+"És útil per a una posterior recuperació de la taula de particions si fos "
+"necessari.\n"
+"Es recomana que efectueu aquesta operació.\n"
+"\n"
+" * \"Restaura la taula de la particions\": permet restaurar una taula de "
+"particions\n"
+"que hagueu desat prèviament en un disquet.\n"
+"\n"
+" * \"Recupera la taula de particions\": si la taula de particions està "
+"malmesa, podeu\n"
+"provar de recuperar-la utilitzant aquesta opció. Tingueu cura i recordeu que "
+"pot fallar.\n"
+"\n"
+" * \"Recarrega la taula de particions\": descarta tots els canvis fets i "
+"torna a \n"
+"carregar la taula de particions inicial.\n"
+"\n"
+" * \"Muntatge automàtic de suports extraïbles\": si desseleccioneu "
+"aquesta opció fareu\n"
+"que els usuaris hagin de muntar i desmuntar les unitats de suports "
+"extraïbles com els \n"
+"disquets i els CD-ROM.\n"
+"\n"
+" * \"Auxiliar\": utilitzeu aquesta opció si voleu usar un auxiliar per "
+"particionar el \n"
+"vostre disc dur. Es recomana que l'utilitzeu si no teniu un bon coneixement "
+"sobre el\n"
+"particionament.\n"
+"\n"
+" * \"Desfés\": utilitzeu aquesta opció per cancel·lar els canvis.\n"
+"\n"
+" * \"Canvia entre mode normal/expert\": permet accions addicionals en les "
+"particions\n"
+"(tipus, opcions, format) i dóna més informació.\n"
+"\n"
+" * \"Fet\": quan hagueu acabat de particionar el vostre disc dur, aquesta "
+"opció\n"
+"desarà els canvis al disc.\n"
+"\n"
+"Nota: podeu accedir a qualsevol opció mitjançant el teclat. Moveu-vos per "
+"les\n"
+"particions amb les tecles Tab i Fletxa amunt/Fletxa avall.\n"
+"\n"
+"Quan seleccioneu una partició, podeu utilitzar:\n"
+"\n"
+" * Ctrl+C per crear una nova partició (quan se n'ha seleccionat una de "
+"buida)\n"
+"\n"
+" * Ctrl+D per suprimir una partició\n"
+"\n"
+" * Ctrl+M per definir el punt de muntatge\n"
+"\n"
+"Per a més informació sobre els diferents sistemes de fitxers disponibles, "
+"llegiu\n"
+"el capítol sobre ext2FS del \"Manual de Referència\".\n"
+"\n"
+"Si esteu fent la instal·lació en un ordinador PPC, potser voldreu crear una\n"
+"petita partició \"bootstrap\" HFS d'un mínim d'1 MB per a ús del carregador\n"
+"d'arrencada yaboot. Si decidiu fer-la una mica més gran, per exemple de\n"
+"50 MB, us serà d'utilitat per emmagatzemar un nucli de recanvi i una imatge\n"
+"del disc RAM per a situacions d'emergència durant l'arrencada."
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Iraq"
-msgstr "Iraq"
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "Territori Britànic de l'Oceà Índic"
+msgid "There was an error installing packages:"
+msgstr "S'ha produït un error en instal·lar els paquets:"
-#: ../../lang.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "India"
-msgstr "Índia"
+msgid "Lexmark inkjet configuration"
+msgstr "Configuració de la Lexmark inkjet"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Israel"
-msgstr "Israel"
+msgid "Undo"
+msgstr "Desfés"
#
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Ireland"
-msgstr "Irlanda"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Indonesia"
-msgstr "Indonèsia"
+msgid "Save partition table"
+msgstr "Escriu la taula de particions"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Hungary"
-msgstr "Hongria"
+msgid "Finnish"
+msgstr "Finès"
#: ../../lang.pm:1
#, c-format
-msgid "Haiti"
-msgstr "Haití"
+msgid "Macedonia"
+msgstr "Macedònia"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Croatia"
-msgstr "Croàcia"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
+"La compartició per usuari utilitza el grup \"fileshare\".\n"
+"Podeu utilitzar userdrake per a afegir un usuari a aquest grup."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Honduras"
-msgstr "Hondures"
+msgid "Slovenian"
+msgstr "Eslovè"
#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Illa Heard i Illes McDonald"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Hong Kong"
-msgstr "Hong Kong"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "China"
-msgstr "Xina"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Guyana"
-msgstr "Guyana"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Guinea-Bissau"
-msgstr "Guinea Bissau"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Guam"
-msgstr "Guam"
+msgid "Libya"
+msgstr "Libèria"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Guatemala"
-msgstr "Guatemala"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "Illes Geòrgia del Sud i Sandwich del Sud"
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr ""
+"S'estan configurant les seqüències, instal·lant el programari, iniciant els "
+"servidors..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Equatorial Guinea"
-msgstr "Guinea Equatorial"
+msgid ""
+"\n"
+"- Burn to CD"
+msgstr ""
+"\n"
+"- Crema a un CD"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Guadeloupe"
-msgstr "Guadalupe"
+msgid "Table"
+msgstr "Taula"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Guinea"
-msgstr "Guinea"
+msgid "I don't know how to format %s in type %s"
+msgstr "No sé com formatar %s amb el tipus %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Gambia"
-msgstr "Gàmbia"
+msgid "Model"
+msgstr "Model"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Greenland"
-msgstr "Groenlàndia"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Gibraltar"
-msgstr "Gibraltar"
+msgid "Stop Server"
+msgstr "Atura el servidor"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Ghana"
-msgstr "Ghana"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
+msgstr ""
+"\n"
+"Seleccioneu un tema per a\n"
+"lilo i bootsplash, \n"
+"podeu triar-los\n"
+"per separat"
-#: ../../lang.pm:1
-#, c-format
-msgid "French Guiana"
-msgstr "Guaiana Francesa"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Modem"
+msgstr "Model"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Georgia"
-msgstr "Geòrgia"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Grenada"
-msgstr "Grenada"
+msgid "Tuvalu"
+msgstr "Tuvalu"
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "United Kingdom"
-msgstr "Regne Unit"
+msgid "Use auto detection"
+msgstr "Utilitza la detecció automàtica"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Gabon"
-msgstr "Gabon"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr ""
+"El GPM afegeix suport de ratolí a aplicacions Linux basades en text, com ara "
+"el Midnight Commander. També permet operacions de tallar i enganxar amb el "
+"ratolí, i inclou suport de menús desplegables a la consola."
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Faroe Islands"
-msgstr "Illes Fèroe"
+msgid "Started on boot"
+msgstr "Iniciat en l'arrencada"
-#: ../../lang.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Micronesia"
-msgstr "Micronèsia"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
+msgstr ""
+"Uniu-vos als grups de suport de MandrakeSoft i a la Comunitat Linux en línia "
+"per compartir els vostres coneixements i ajudar els altres esdevenint un "
+"expert reconegut al lloc web de suport tècnic en línia:"
-#: ../../lang.pm:1
-#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Illes Malvines (Falkland)"
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
+msgstr ""
+"Les opcions següents es poden modificar per personalitzar la seguretat\n"
+"del vostre sistema. Feu clic a \"Ajuda\" si voleu més informació.\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Fiji"
-msgstr "Fiji"
+msgid "Automatically find available printers on remote machines"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Finland"
-msgstr "Finlàndia"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
+"\n"
+"- Desa-ho a una cinta en el dispositiu: %s"
#: ../../lang.pm:1
#, c-format
-msgid "Ethiopia"
-msgstr "Etiòpia"
+msgid "East Timor"
+msgstr "Timor Oriental"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Spain"
-msgstr "Espanya"
+msgid "Del profile..."
+msgstr "Suprimeix el perfil..."
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Eritrea"
-msgstr "Eritrea"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr ""
-#: ../../lang.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Western Sahara"
-msgstr "Sàhara Occidental"
+msgid "Installing Foomatic..."
+msgstr "S'està instal·lant el Foomatic..."
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Egypt"
-msgstr "Egipte"
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "Si us plau, sortiu i utilitzeu Ctrl-Alt-tecla de retrocés"
-#: ../../lang.pm:1
-#, c-format
-msgid "Estonia"
-msgstr "Estònia"
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "detected"
+msgstr "s'ha detectat %s"
-#: ../../lang.pm:1
-#, c-format
-msgid "Ecuador"
-msgstr "Equador"
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr "Cal instal·lar el paquet %s. Voleu instal·lar-lo?"
-#: ../../lang.pm:1
+#
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Algeria"
-msgstr "Algèria"
+msgid "Package: "
+msgstr "Paquet: "
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Dominican Republic"
-msgstr "República Dominicana"
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr "No s'ha pogut escriure /etc/sysconfig/bootsplash."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Dominica"
-msgstr "Dominica"
+msgid "SECURITY WARNING!"
+msgstr "AVÍS DE SEGURETAT!"
-#: ../../lang.pm:1
+#
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Denmark"
-msgstr "Dinamarca"
+msgid "StarOffice"
+msgstr "StarOffice"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Djibouti"
-msgstr "Djibouti"
+msgid "No, I don't want autologin"
+msgstr "No, no vull l'entrada automàtica"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Cyprus"
-msgstr "Xipre"
+msgid "Windows Migration tool"
+msgstr "Eina de migració des de Windows"
-#: ../../lang.pm:1
-#, c-format
-msgid "Christmas Island"
-msgstr "Illa Christmas"
+#: ../../any.pm:1 ../../help.pm:1
+#, fuzzy, c-format
+msgid "All languages"
+msgstr "Escolliu el vostre idioma"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cape Verde"
-msgstr "Cap Verd"
+msgid "Removing %s"
+msgstr "S'està esborrant %s"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Cuba"
-msgstr "Cuba"
+msgid "Testing your connection..."
+msgstr "S'està comprovant la vostra connexió..."
-#: ../../lang.pm:1
-#, c-format
-msgid "Colombia"
-msgstr "Colòmbia"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cache size"
+msgstr "mida del fragment"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Cameroon"
-msgstr "Camerun"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
+msgstr ""
+"Ara, la contrasenya està habilitada, però l'ús com a ordinador de xarxa "
+"segueix sense ser recomanable."
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Chile"
-msgstr "Xile"
+msgid "Start sector: "
+msgstr "Sector d'inici: "
#: ../../lang.pm:1
#, c-format
-msgid "Cook Islands"
-msgstr "Illes Cook"
+msgid "Congo (Brazzaville)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "Cote d'Ivoire"
-msgstr "Costa d'Ivori"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr "Cal instal·lar el paquet %s. Voleu instal·lar-lo?"
#: ../../lang.pm:1
#, c-format
-msgid "Switzerland"
-msgstr "Suïssa"
+msgid "Seychelles"
+msgstr "Seychelles"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congo (Brazzaville)"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
msgstr ""
+"Printerdrake ha comparat el nom del model resultant de la detecció "
+"automàtica d'impressores amb els models llistats en la seva base de dades "
+"d'impressores per trobar el millor resultat. L'elecció pot ser dolenta, "
+"especialment si la vostra impressora no es troba a la base de dades. Per "
+"tant, mireu si l'elecció és correcta i feu clic a \"El model és correcte\" "
+"si ho és, o a \"Selecciona el model manualment\" per tal d'escollir "
+"manualment el model d'impressora en la pantalla següent.\n"
+"\n"
+"Per la vostra impressora el Printerdrake ha trobat:\n"
+"\n"
+"%s"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Central African Republic"
-msgstr "República Centrefricana"
+msgid "Bad password on %s"
+msgstr "Contrasenya incorrecta a %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congo (Kinshasa)"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
msgstr ""
+"\n"
+"Hi ha una impressora desconeguda connectada directament a l'ordinador."
#: ../../lang.pm:1
#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Illes Cocos (Keeling)"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Canada"
-msgstr "Canadà"
+msgid "Zambia"
+msgstr "Zàmbia"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Belize"
-msgstr "Belize"
+msgid "Security Administrator (login or email)"
+msgstr "Administrador de seguretat (login o email)"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Belarus"
-msgstr "Bielorrússia"
+msgid "Sorry, we support only 2.4 kernels."
+msgstr "Només s'accepten nuclis de la sèrie 2.4."
-#: ../../lang.pm:1
+#
+#: ../../keyboard.pm:1
#, c-format
-msgid "Botswana"
-msgstr "Botswana"
+msgid "Romanian (qwerty)"
+msgstr "Romanès (qwerty)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bouvet Island"
-msgstr "Illa Bouvet"
+msgid "Under Devel ... please wait."
+msgstr "Sota desenvolupament ... espereu si us plau."
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Bhutan"
-msgstr "Bhutan"
+msgid "Czech Republic"
+msgstr "República Txeca"
#: ../../lang.pm:1
#, c-format
-msgid "Bahamas"
-msgstr "Bahames"
+msgid "Egypt"
+msgstr "Egipte"
-#: ../../lang.pm:1
+#
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Brazil"
-msgstr "Brasil"
+msgid "Old configuration (isdn4net)"
+msgstr "Configuració antiga (isdn4net)"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bolivia"
-msgstr "Bolívia"
+msgid "Sound card"
+msgstr "Targeta de so"
-#: ../../lang.pm:1
+#
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Brunei Darussalam"
-msgstr "Brunei"
+msgid "Import Fonts"
+msgstr "Importació de fonts"
-#: ../../lang.pm:1
-#, c-format
-msgid "Bermuda"
-msgstr "Bermuda"
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+"Teniu una partició FAT gran\n"
+"(utilitzada normalment pel DOS/Windows de Microsoft).\n"
+"Suggereixo que primer en canvieu la mida\n"
+"(feu-hi clic i després feu clic a \"Canvia la mida\")"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Benin"
-msgstr "Benín"
+msgid "Suppress Temporary Files"
+msgstr "Suprimeix els fitxers temporals"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Burundi"
-msgstr "Burundi"
+msgid "Change partition type"
+msgstr "Canvia el tipus de partició"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Bahrain"
-msgstr "Bahrain"
+msgid ""
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
-#: ../../lang.pm:1
+#
+#: ../../standalone/draksec:1
#, c-format
-msgid "Bulgaria"
-msgstr "Bulgària"
+msgid "Network Options"
+msgstr "Opcions de xarxa"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Burkina Faso"
-msgstr "Burkina Faso"
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
+"Mostra el tema\n"
+"sota la consola"
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Bangladesh"
-msgstr "Bangla Desh"
+msgid "Statistics"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Barbados"
-msgstr "Barbados"
+msgid "(on %s)"
+msgstr "(en %s)"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Bòsnia i Hercegovina"
+msgid "MM Series"
+msgstr "MM Series"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Azerbaijan"
-msgstr "Azerbaitjan"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr ""
+"Una llibreria que defensa contra els atacs de 'buffer overflow' i de 'format "
+"string'."
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Aruba"
-msgstr "Aruba"
+msgid "average"
+msgstr ""
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Australia"
-msgstr "Austràlia"
+msgid "New printer name"
+msgstr "Nou nom d'impressora"
#: ../../lang.pm:1
#, c-format
-msgid "American Samoa"
-msgstr "Samoa Americana"
+msgid "Equatorial Guinea"
+msgstr "Guinea Equatorial"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Argentina"
-msgstr "Argentina"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
-#: ../../lang.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Antarctica"
-msgstr "Antàrtida"
+msgid "Build Backup"
+msgstr "Construeix la còpia de seguretat"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Angola"
-msgstr "Angola"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
+"Per imprimir un fitxer des de la línia d'ordres (finestra de terminal) "
+"utilitzeu l'ordre \"%s <fitxer>\" o \"%s <fitxer>\".\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Netherlands Antilles"
-msgstr "Antilles Holandeses"
+msgid "Currently, no alternative possibility is available"
+msgstr ""
-#: ../../lang.pm:1
+#
+#: ../../keyboard.pm:1
#, c-format
-msgid "Armenia"
-msgstr "Armènia"
+msgid "Romanian (qwertz)"
+msgstr "Romanès (qwertz)"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Albania"
-msgstr "Albània"
+msgid "Write Config"
+msgstr "Escriu la configuració"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Anguilla"
-msgstr "Anguilla"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+"El dimoni 'routed' permet que la taula d'encaminadors IP automàtics\n"
+"s'actualitzi mitjançant el protocol RIP. Mentre que el RIP s'utilitza\n"
+"àmpliament en xarxes petites, les xarxes complexes necessiten protocols\n"
+"d'encaminament més complexos."
#: ../../lang.pm:1
#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Antigua i Barbuda"
+msgid "Kiribati"
+msgstr "Kiribati"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "United Arab Emirates"
-msgstr "Unió dels Emirats Àrabs"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Andorra"
-msgstr "Andorra"
+msgid "Browse"
+msgstr "Navega"
-#: ../../lang.pm:1
-#, c-format
-msgid "Afghanistan"
-msgstr "Afganistan"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "CDROM"
+msgstr "en CDROM"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "Voleu intentar connectar-vos a Internet ara?"
-#: ../../loopback.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Muntatges circulars %s\n"
+msgid "Belgian"
+msgstr "Belga"
-#: ../../lvm.pm:1
+#
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Elimineu primer els volums lògics\n"
+msgid "Do you have an ISA sound card?"
+msgstr "Teniu una targeta de so ISA?"
-#: ../../modules.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
msgstr ""
-"El suport per a PCMCIA ja no existeix en els nuclis 2.2. Utilitzeu un nucli "
-"2.4."
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "MOVEU LA RODA!"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "To activate the mouse,"
-msgstr "Per activar el ratolí,"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "Please test the mouse"
-msgstr "Si us plau, comproveu el ratolí."
+"No s'ha detectat cap adaptador de xarxa ethernet al sistema.\n"
+"No puc configurar aquest tipus de connexió."
-#: ../../mouse.pm:1
-#, c-format
-msgid "No mouse"
-msgstr "Cap ratolí"
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid "Windows"
+msgstr "Domini de Windows"
-#: ../../mouse.pm:1
+#
+#: ../../common.pm:1
#, c-format
-msgid "none"
-msgstr "cap"
+msgid "Can't make screenshots before partitioning"
+msgstr "No es poden fer captures de pantalla abans de fer les particions"
-#: ../../mouse.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "3 buttons"
-msgstr "3 botons"
+msgid "Host Name"
+msgstr "Nom de l'ordinador central"
-#: ../../mouse.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "2 buttons"
-msgstr "2 botons"
+msgid "/File/Save _As"
+msgstr "/Fitxer/_Anomena i desa"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "1 button"
-msgstr "1 botó"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "busmouse"
-msgstr "busmouse"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr ""
+"%s no és a la base de dades de l'escàner, voleu configurar-lo manualment?"
-#: ../../mouse.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid "Delay before booting default image"
+msgstr "Demora abans d'arrencar la imatge predeterminada"
-#: ../../mouse.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (sèrie, tipus C7 antic)"
+msgid "Restrict command line options"
+msgstr "Limita les opcions de la línia d'ordres"
-#: ../../mouse.pm:1
+#
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid "East Europe"
+msgstr "Europa de l'Est"
-#: ../../mouse.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "MM Series"
-msgstr "MM Series"
+msgid "Use free space"
+msgstr "Utilitza l'espai lliure"
-#: ../../mouse.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid "use dhcp"
+msgstr "utilitza dhcp"
-#: ../../mouse.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "Mail alert"
+msgstr "Alerta de correu"
-#: ../../mouse.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
+msgid "Internet configuration"
+msgstr "Configuració d'Internet"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+msgid "Uzbekistan"
+msgstr "Uzbekistan"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid "Detected %s"
+msgstr "S'ha detectat %s"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+#
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _printers"
+msgstr "Detectada automàticament"
-#: ../../mouse.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Ratolí genèric de 3 botons"
+msgid "Finish"
+msgstr "Fi"
-#: ../../mouse.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Ratolí genèric de 2 botons"
+msgid "Show automatically selected packages"
+msgstr "Mostra automàticament els paquets seleccionats"
-#: ../../mouse.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "serial"
-msgstr "sèrie"
+msgid "CPU flags reported by the kernel"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
+msgid "Togo"
+msgstr "Togo"
-#: ../../mouse.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Wheel"
-msgstr "Rodeta"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr "Alguna cosa ha anat malament! Teniu instal·lat l'mkisofs?"
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Generic"
-msgstr "Genèric"
+msgid "16 MB"
+msgstr "16 MB"
-#: ../../mouse.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid "Please try again"
+msgstr "Si us plau, torneu-ho a intentar"
-#: ../../mouse.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+msgid "The model is correct"
+msgstr "El model és correcte"
-#: ../../mouse.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Ratolí PS2 genèric amb rodeta"
+msgid "FAT resizing failed: %s"
+msgstr "Ha fallat el redimensionament de la FAT: %s"
-#: ../../mouse.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+msgid "Individual package selection"
+msgstr "Selecció individual de paquets"
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Standard"
-msgstr "Estàndard"
+msgid "This partition is not resizeable"
+msgstr "No es pot canviar la mida d'aquesta partició"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sun - Mouse"
-msgstr "Ratolí de Sun"
+msgid "Location"
+msgstr "Ubicació"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Commuta entre pla i ordenat per grups"
+msgid "USA (cable-hrc)"
+msgstr "EUA (cable-hrc)"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Collapse Tree"
-msgstr "Redueix l'arbre"
+msgid "Journalised FS"
+msgstr "Journalised FS"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Expand Tree"
-msgstr "Expandeix l'arbre"
+msgid "Guatemala"
+msgstr "Guatemala"
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Info"
-msgstr "Informació"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "This machine"
+msgstr "(en aquest ordinador)"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Is this correct?"
-msgstr "Això és correcte?"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "Lletra d'unitat de DOS: %s (només és una suposició)\n"
-#: ../../my_gtk.pm:1
-#, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select the files or directories and click on 'OK'"
+msgstr "Seleccioneu els fitxers i directoris i feu clic a 'Afegeix'"
-#: ../../partition_table.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Error writing to file %s"
-msgstr "S'ha produït un error en escriure al fitxer %s"
+msgid "Bahrain"
+msgstr "Bahrain"
-#: ../../partition_table.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Bad backup file"
-msgstr "Fitxer de còpia de seguretat incorrecte"
+msgid "omit scsi modules"
+msgstr "omet els mòduls SCSI"
-#: ../../partition_table.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Ha fallat la restauració des del fitxer %s: %s"
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr ""
-#: ../../partition_table.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
msgstr ""
-"Hi ha un forat a la vostra taula de particions, però no puc utilitzar-lo.\n"
-"L'única solució és moure les particions primàries per fer que el forat quedi "
-"contigu a les particions ampliades"
+"Atès que esteu realitzant una instal·lació des de xarxa, ja teniu la xarxa "
+"configurada.\n"
+"Feu clic a 'D'acord' per conservar la configuració, o a 'Cancel·la' per "
+"tornar a configurar la connexió a Internet i a la xarxa local.\n"
-#: ../../partition_table.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Aquesta plataforma no suporta particions ampliades"
+msgid "Keyboard layout: %s\n"
+msgstr "Disposició del teclat: %s\n"
-#: ../../partition_table.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "mount failed: "
-msgstr "ha fallat el muntatge: "
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
-#: ../../pkgs.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "maybe"
-msgstr "potser"
+msgid "Maltese (US)"
+msgstr "Maltès (Estats Units)"
-#: ../../pkgs.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "nice"
-msgstr "bonic"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"Munta i desmunta tots els punts de muntatge dels sistemes de fitxers\n"
+"de xarxa (NFS), SMB (gestor de xarxes d'àrea local/Windows) i NCP (NetWare)."
-#: ../../pkgs.pm:1
-#, c-format
-msgid "very nice"
-msgstr "molt bonic"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Tvcard"
+msgstr "Targeta de TV"
-#: ../../pkgs.pm:1
-#, c-format
-msgid "important"
-msgstr "important"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Toggle between normal/expert mode"
+msgstr "Canvia al mode normal"
-#: ../../pkgs.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "must have"
-msgstr "s'ha de tenir"
+msgid "Size"
+msgstr "Mida"
-#: ../../raid.pm:1
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "No hi ha prou particions per al nivell RAID %d\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "GRUB"
+msgstr "GB"
-#: ../../raid.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "mkraid failed"
-msgstr "L'mkraid ha fallat"
+msgid "Greenland"
+msgstr "Groenlàndia"
-#: ../../raid.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "L'mkraid ha fallat (potser manquen les eines del RAID (raidtools)?)"
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
-#: ../../raid.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "No es pot afegir una partició a un RAID _formatat_ md%d"
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr ""
+"L'etiqueta de la cinta no és correcta. L'etiqueta d'aquesta cinta és %s."
-#
-#: ../../services.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Stop"
-msgstr "Atura"
+msgid ""
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
+msgstr ""
+"La configuració de la connexió compartida a Internet ja s'ha dut a terme.\n"
+"Ara està habilitada.\n"
+"\n"
+"Què voleu fer?"
#
-#: ../../services.pm:1
-#, c-format
-msgid "Start"
-msgstr "Inicia"
-
-#: ../../services.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "On boot"
-msgstr "En arrencar"
+msgid "Delete All NBIs"
+msgstr "Suprimeix tots els NBI"
-#: ../../services.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"No additional information\n"
-"about this service, sorry."
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
msgstr ""
-"Malauradament no hi ha més informació\n"
-"sobre aquest servei."
-
-#: ../../services.pm:1
-#, c-format
-msgid "Services and deamons"
-msgstr "Serveis i dimonis"
+"El LILO i el grub són carregadors de l'arrencada de GNU/Linux. Normalment,\n"
+"aquesta etapa és totalment automàtica. De fet, el DrakX analitza el \n"
+"sector d'arrencada i actua d'acord amb el que hi troba:\n"
+"\n"
+" * si troba un sector d'arrencada de Windows, el reemplaçarà amb un sector\n"
+"d'arrencada de grub/LILO. Per tant, sereu capaç de carregar el GNU/Linux\n"
+"o un altre sistema operatiu.\n"
+"\n"
+" * si es troba un sector d'arrencada del grub o del LILO, el reemplaçarà\n"
+"amb un de nou.\n"
+"\n"
+"Si té algun dubte, el DrakX us presentarà un diàleg amb diverses opcions:\n"
+"\n"
+" * \"Carregador de l'arrencada\": teniu tres opcions:\n"
+"\n"
+" * \"GRUB\": si preferiu el grub (menú de text).\n"
+"\n"
+" * \"LILO amb menú gràfic\": si preferiu el LILO amb una interfície\n"
+"gràfica.\n"
+"\n"
+" * \"LILO amb menú de text\": si preferiu el LILO amb el seu menú de\n"
+"text.\n"
+"\n"
+" * \"Dispositiu d'arrencada\": en la majoria de casos, no heu de canviar "
+"l'opció\n"
+"per defecte (\"/dev/hda\"), però si ho preferiu, el carregador de "
+"l'arrencada\n"
+"pot instal·lar-se en el segon disc dur (\"/dev/hdb\"), o fins i tot en un \n"
+"disquet (\"/dev/fd0\").\n"
+"\n"
+" * \"Temps d'espera abans de carregar la imatge per defecte\": quan es "
+"reinicia\n"
+"l'ordinador, aquest és el temps de què disposa l'usuari per escollir una "
+"entrada\n"
+"diferent de l'entrada per defecte en el menú d'arrencada.\n"
+"\n"
+"Teniu en compte que si escolliu no instal·lar un carregador de l'arrencada \n"
+"(seleccionant \"Cancel·la\" aquí), heu d'estar segurs que teniu alguna "
+"manera\n"
+"d'arrencar el vostre sistema Mandrake Linux! Encara més, estigueu segurs de\n"
+"saber què feu abans de canviar alguna de les opcions.\n"
+"\n"
+"Si feu clic al botó \"Avançat\" d'aquest diàleg podreu modificar algunes\n"
+"opcions avançades, reservades als usuaris experts."
-#: ../../services.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "stopped"
-msgstr "aturat"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
+msgstr ""
-#: ../../services.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "running"
-msgstr "s'està executant"
+msgid "Which configuration of XFree do you want to have?"
+msgstr "Quina configuració de l'XFree voleu tenir?"
-#: ../../services.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"Escolliu els serveis que s'han d'iniciar automàticament durant l'arrencada"
+msgid "More"
+msgstr "Més"
#
-#: ../../services.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Database Server"
-msgstr "Servidor de base de dades"
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+"Amb aquest nivell de seguretat, la utilització d'aquest sistema com a "
+"servidor esdevé possible.\n"
+"La seguretat és ara prou alta com per utilitzar el sistema com a servidor\n"
+"que accepti connexions de molts clients. Nota: si la vostra màquina és només "
+"un client d'Internet, seria millor escollir un nivell més baix."
-#
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Remote Administration"
-msgstr "Administració remota"
+msgid "Account Password"
+msgstr "Contrasenya del compte"
-#: ../../services.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "File sharing"
-msgstr "Compartició de fitxers"
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
+msgstr ""
+"Heu decidit instal·lar el gestor de l'arrencada en una partició.\n"
+"Això implica que ja teniu un gestor d'arrencada en el disc des del qual "
+"arrenqueu (p.ex.: System Commander).\n"
+"\n"
+"En quina unitat arrenqueu?"
-#: ../../services.pm:1
+#
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet"
-msgstr "Internet"
+msgid "Tajik keyboard"
+msgstr "Teclat tadjik"
-#
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printing"
-msgstr "Impressió"
+msgid ""
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
+msgstr ""
+"Podeu copiar la configuració d'impressió que he fet per la cua %s a la %s, "
+"la cua d'impressió actual. Totes les dades de configuració (nom "
+"d'impressora, descripció, ubicació, tipus de connexió i paràmetres per "
+"defecte) se sobreescriuran, però els treballs d'impressió no seran "
+"transferits.\n"
+"No totes les cues d'impressió poden ser transferides degut a les raons "
+"següents:\n"
#
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Inicia l'X Font Server (això és necessari perquè l'XFree funcioni)."
+msgid "Font List"
+msgstr "Llista de fonts"
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Carrega els controladors per a dispositius USB."
+msgid ""
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
+msgstr ""
+"Potser us caldrà canviar el dispositiu d'arrencada Open Firware per\n"
+"habilitar el carregador de l'arrencada. Si no veieu l'indicador del\n"
+"carregador de l'arrencada en tornar a arrencar, premeu\n"
+"Command-Option-O-F en tornar a arrencar i introduïu:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Després, escriviu: shut-down\n"
+"En l'arrencada següent heu de veure l'indicador del carregador de "
+"l'arrencada."
-#: ../../services.pm:1
-#, c-format
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
msgstr ""
-"El syslog és el sistema que utilitzen molts dimonis per registrar\n"
-"missatges en diversos fitxers de registre del sistema. És aconsellable\n"
-"executar-lo sempre."
+"Sembla que teniu un ordinador OldWorld o una màquina \n"
+"desconeguda; el carregador d'arrencada yaboot no funcionarà.\n"
+"La instal·lació continuarà, però haureu d'utilitzar el BootX\n"
+"per arrencar l'ordinador"
-#
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Executa el sistema de so en el vostre ordinador"
+msgid "Select file"
+msgstr "Seleccioneu el fitxer"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"Choose the network or host on which the local printers should be made "
+"available:"
msgstr ""
-"El protocol rwho permet que els usuaris remots obtinguin una llista\n"
-"de tots els usuaris que estan connectats a un ordinador que està\n"
-"executant el dimoni rwho (similar al finger)."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
msgstr ""
-"El protocol rusers permet que els usuaris d'una xarxa identifiquin\n"
-"qui està connectat en altres ordinadors de la mateixa."
+"Podeu utilitzar aquestes ordres en el camp \"Ordre d'impressió\" dels "
+"diàlegs d'impressió de moltes aplicacions, però ara no heu de subministrar "
+"el fitxer perquè el fitxer per imprimir ja el proporciona l'aplicació.\n"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"El protocol rstat permet que els usuaris d'una xarxa recuperin\n"
-"mesures de rendiment de qualsevol ordinador de la mateixa."
+msgid "Japan"
+msgstr "Japó"
-#: ../../services.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
+msgid "Print option list"
+msgstr "Imprimeix la llista d'opcions"
+
+#: ../../standalone/localedrake:1
+#, c-format
+msgid "The change is done, but to be effective you must logout"
msgstr ""
-"El dimoni 'routed' permet que la taula d'encaminadors IP automàtics\n"
-"s'actualitzi mitjançant el protocol RIP. Mentre que el RIP s'utilitza\n"
-"àmpliament en xarxes petites, les xarxes complexes necessiten protocols\n"
-"d'encaminament més complexos."
+"El canvi està fet, però perquè sigui efectiu heu de sortir de la sessió "
+"actual"
-#: ../../services.pm:1
+#
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Search servers"
+msgstr "Cerca servidors"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "NCP queue name missing!"
+msgstr "Falta el nom de la cua NCP!"
+
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
+"Warning, another internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"Assigna els dispositius en cru (raw) a dispositius de blocs (tals com les "
-"particions de\n"
-"disc dur), perquè siguin utilitzats per aplicacions com ara Oracle"
+"Avís: s'ha detectat una altra connexió a Internet, podria estar utilitzant "
+"la vostra xarxa"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Cd-Rom labeled \"%s\""
+msgstr "CD-ROM etiquetat com \"%s\""
#: ../../services.pm:1
#, c-format
@@ -7038,372 +6465,348 @@ msgstr ""
"Desa i recupera el generador d'entropia del sistema per a\n"
"la generació de nombres aleatoris d'una qualitat més alta."
-#
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
msgstr ""
-"El Postfix és un Agent de Transport de Correu, que és el programa que passa "
-"el correu d'un ordinador a un altre."
+"És impossible de comprovar el sistema de fitxers %s. Voleu reparar els "
+"errors? (Vigileu, podríeu perdre dades.)"
-#: ../../services.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"El mapador de ports (portmapper) gestiona les connexions RPC, que s'usen "
-"per\n"
-"protocols com ara l'NFS i el NIS. El servidor portmap s'ha d'estar\n"
-"executant en ordinadors que actuen com a servidors per a protocols que\n"
-"utilitzen el mecanisme RPC."
+msgid "Turn your computer into a reliable server"
+msgstr "Convertiu la vostra màquina en un servidor fiable"
-#: ../../services.pm:1
+#: ../../network/network.pm:1
+#, c-format
+msgid " (driver %s)"
+msgstr " (controlador %s)"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
+"Loopback file(s):\n"
+" %s\n"
msgstr ""
-"El suport PCMCIA serveix normalment per funcionar amb coses com ara "
-"l'ethernet\n"
-"i els mòdems en portàtils. No s'iniciarà tret que es configuri, de manera\n"
-"que no hi ha problema per instal·lar-lo en ordinadors que no el necessiten."
+"Fitxer(s) de loopback:\n"
+" %s\n"
-#: ../../services.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Funciona amb OKI 4w i winprinters compatibles."
+msgid "I don't know"
+msgstr "No ho sé"
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Engega automàticament a l'arrencada la tecla de fixació del \n"
-"teclat numèric a la consola i sota XFree."
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr ", host TCP/IP \"%s\", port %s"
-#: ../../services.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
msgstr ""
-"L'NFS és un protocol popular de compartició de fitxers en xarxes TCP/IP\n"
-"Aquest servei proporciona la funcionalitat de blocatge de fitxer NFS."
+"Ara es configurarà un disquet d'instal·lació automàtica. Aquesta "
+"característica és perillosa i s'ha d'utilitzar amb molta cura.\n"
+"\n"
+"Amb aquesta característica, sereu capaç de repetir la instal·lació que ja "
+"heu fet en aquest ordinador, tot i que se us consultarà en alguns passos, "
+"perquè pugueu canviar els valors.\n"
+"\n"
+"Per màxima seguretat, el particionament i la formatació mai seran executats "
+"automàticament, independentment del que trieu durant la instal·lació "
+"d'aquest ordinador.\n"
+"\n"
+"Voleu continuar?"
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
msgstr ""
-"L'NFS és un protocol popular de compartició de fitxers en xarxes TCP/IP.\n"
-"Aquest servei proporciona la funcionalitat del servidor NFS, que es\n"
-"configura mitjançant el fitxer /etc/exports."
+"\n"
+"\n"
+"La vostra targeta fa servir actualment el controlador %s \"%s\" (el "
+"controlador per defecte per a aquesta targeta és \"%s\")"
-#: ../../services.pm:1
+#
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Activa/Desactiva totes les interfícies de xarxa configurades per\n"
-"iniciar-se durant l'arrencada."
+msgid "Post Uninstall"
+msgstr "Post-desinstal·lació"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
+msgid " ("
msgstr ""
-"Munta i desmunta tots els punts de muntatge dels sistemes de fitxers\n"
-"de xarxa (NFS), SMB (gestor de xarxes d'àrea local/Windows) i NCP (NetWare)."
#
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cpuid level"
+msgstr "Nivell de seguretat"
+
+#
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) és un servidor de noms de domini (DNS) que s'utilitza per "
-"convertir noms d'ordinadors centrals en adreces IP."
+msgid "Mongolian (cyrillic)"
+msgstr "Mongol (ciríl·lic)"
-#: ../../services.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"El Servidor Virtual de Linux (LVS) s'usa per construir un servidor de \n"
-"gran capacitat i robustesa."
+msgid "Add a module"
+msgstr "Afegeix un mòdul"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"L'lpd és el dimoni d'impressió necessari perquè l'lpr funcioni\n"
-"correctament. Bàsicament, es tracta d'un servidor que assigna les\n"
-"tasques d'impressió a la(es) impressora(es)."
+msgid "Profile to delete:"
+msgstr "Perfil a suprimir:"
-#: ../../services.pm:1
+#
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Local measure"
+msgstr "Fitxers locals"
+
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"De vegades, el Linuxconf determinarà que s'han de fer algunes tasques\n"
-"en iniciar l'ordinador per mantenir la configuració del sistema."
+msgid "busmouse"
+msgstr "busmouse"
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-"Detecció i configuració automàtica de maquinari en iniciar l'ordinador."
+msgid "Account Login (user name)"
+msgstr "Entrada del compte (nom d'usuari)"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
+msgid "Fdiv bug"
msgstr ""
-"Regeneració automàtica del capçal de nucli a /boot per\n"
-"/usr/include/linux/{autoconf,versió}.h"
-#: ../../services.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
msgstr ""
-"Aquest paquet carrega el mapa de teclat seleccionat segons s'ha definit\n"
-"a /etc/sysconfig/keyboard. Es pot seleccionar mitjançant la utilitat\n"
-"kbdconfig.\n"
-"Per a la majoria d'ordinadors, s'ha de deixar habilitat."
+"Configuració del drakfirewall\n"
+"\n"
+"Assegureu-vos d'haver configurat l'accés a la xarxa local/Internet\n"
+"amb el drakconnect abans de continuar."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Executa el filtratge de paquets per als nuclis Linux 2.2, per instal·lar\n"
-"un tallafoc que protegeixi el vostre ordinador d'atacs des de la xarxa."
+msgid "Benin"
+msgstr "Benín"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"El dimoni superservidor d'Internet (conegut normalment com 'inetd') inicia\n"
-"altres serveis d'Internet a mesura que es van necessitant. És el "
-"responsable\n"
-"d'iniciar molts serveis, incloent el telnet, l'ftp, l'rsh i l'rlogin. Si\n"
-"s'inhabilita l'inetd, s'inhabiliten tots els serveis de què és responsable."
+msgid "Uruguay"
+msgstr "Uruguai"
-#: ../../services.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"L'Apache és un servidor de World Wide Web. S'utilitza per servir fitxers\n"
-"HTML i CGI."
+msgid "Path selection"
+msgstr "Selecció del camí"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
+msgid "Name/IP address of host:"
msgstr ""
-"El HardDrake fa una prova del maquinari, i opcionalment configura\n"
-"el maquinari nou/canviat."
-#: ../../services.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
+msgid "Monitor: %s\n"
+msgstr "Monitor: %s\n"
+
+#: ../../partition_table/raw.pm:1
+#, fuzzy, c-format
msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
msgstr ""
-"El GPM afegeix suport de ratolí a aplicacions Linux basades en text, com ara "
-"el Midnight Commander. També permet operacions de tallar i enganxar amb el "
-"ratolí, i inclou suport de menús desplegables a la consola."
+"Alguna cosa no va bé en la vostra unitat. \n"
+"Ha fallat una comprovació de la integritat de les dades. \n"
+"Això vol dir que qualsevol cosa que s'escrigui al disc acabarà feta malbé."
-#: ../../services.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"El cron és un programa UNIX estàndard que executa programes determinats\n"
-"per l'usuari en hores programades. El vixie cron afegeix un cert nombre de\n"
-"característiques al cron bàsic, incloent seguretat millorada i opcions\n"
-"de configuració més potents."
+msgid "Printer host name or IP missing!"
+msgstr "Falta el nom o la IP de l'ordinador central de la impressora!"
-#: ../../services.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
+msgid "Please check all users that you want to include in your backup."
msgstr ""
-"Executa les ordres programades per l'ordre 'at' a l'hora que es va\n"
-"especificar en executar 'at', i executa les ordres automàtiques quan la\n"
-"mitjana de càrrega és prou baixa."
+"Si us plau, escolliu tots els usuaris que voleu incloure en la còpia de "
+"seguretat."
-#: ../../services.pm:1
-#, c-format
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
msgstr ""
-"L'apmd s'utilitza per monitoritzar l'estat de la bateria i registrar-lo "
-"mitjançant el registre del sistema (syslog).\n"
-"També es pot utilitzar per apagar l'ordinador quan queda poca bateria."
+"Aquest escàner %s s'ha de configurar amb printerdrake.\n"
+"Podeu executar printerdrake des del Centre de Control Mandrake en la secció "
+"de Maquinari."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron, un programador d'ordres periòdiques."
+msgid "Bangladesh"
+msgstr "Bangla Desh"
-#: ../../services.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Executa el sistema de so ALSA (Advanced Linux Sound Architecture)"
+msgid "Japan (cable)"
+msgstr "Japó (cable)"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"Benvingut a l'auxiliar de configuració de la impressora\n"
+"\n"
+"Aquest auxiliar us ajudarà a instal·lar les impressores connectades "
+"directament a l'ordinador, o a la xarxa, o a una màquina Windows remota.\n"
+"\n"
+"Si teniu impressores connectades a aquesta màquina, endolleu-les i engegueu-"
+"les per tal de poder-les detectar automàticament. Engegueu també les "
+"impressores de xarxa i les màquines Windows que tenen impressores "
+"connectades.\n"
+"\n"
+"Noteu que la detecció automàtica d'impressores de la xarxa local triga més "
+"que la detecció d'impressores connectades directament a la màquina. Seria "
+"millor que desactivéssiu la detecció automàtica d'impressores en xarxa o en "
+"màquina Windows si no la necessiteu.\n"
+"\n"
+"Feu clic a \"Següent\" quan estigueu preparat, o a \"Cancel·la\" si no voleu "
+"configurar ara les impressores."
#
-#: ../../standalone.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Initial tests"
+msgstr "Comprovacions inicials"
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Installing packages..."
-msgstr "S'estan instal·lant els paquets..."
+msgid "Continue"
+msgstr "Continua"
-#: ../../standalone.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-msgstr ""
+msgid "Custom Restore"
+msgstr "Restauració personalitzada"
-#: ../../standalone.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
msgstr ""
-#: ../../standalone.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
+msgid "Script-based"
+msgstr "Basat en script"
-#: ../../standalone.pm:1
+#: ../../install_any.pm:1 ../../partition_table.pm:1
#, c-format
-msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
-msgstr ""
+msgid "Error reading file %s"
+msgstr "S'ha produït un error en llegir el fitxer %s"
-#: ../../standalone.pm:1
+#
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr ""
+msgid "PLL setting:"
+msgstr "Configuració del PLL:"
-#: ../../standalone.pm:1
+#
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
-msgstr ""
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "Heu de tenir una partició FAT muntada en /boot/efi"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgid " on "
msgstr ""
-#: ../../standalone.pm:1
-#, fuzzy, c-format
-msgid "[keyboard]"
-msgstr "Teclat"
+#: ../../diskdrake/dav.pm:1
+#, c-format
+msgid "The URL must begin with http:// or https://"
+msgstr "L'URL ha de començar per http:// o https://"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
msgstr ""
+"Podeu especificar directament l'URI per accedir a la impressora. L'URI ha de "
+"complir les especificacions CUPS o Foomatic. Cal remarcar que alguns gestors "
+"de cues no accepten tots els tipus d'URI."
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
-msgstr ""
+msgid "Other OS (SunOS...)"
+msgstr "Un altre SO (SunOS...)"
-#: ../../standalone.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Install/Upgrade"
+msgstr "Instal·la/Actualitza"
+
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
-msgstr ""
+msgid "%d packages"
+msgstr "%d paquets"
#: ../../standalone.pm:1
#, c-format
@@ -7421,3761 +6824,4040 @@ msgid ""
"--version : show version number.\n"
msgstr ""
-#: ../../standalone.pm:1
-#, fuzzy, c-format
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Domain Authentication Required"
+msgstr "Cal l'autenticació de domini"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
-"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-msgstr ""
-" Aquest programa és programari lliure; el podeu redistribuir i/o modificar\n"
-" sota els termes de la 'GNU General Public License' publicada per\n"
-" la Free Software Foundation; tant la versió 2 com (si voleu)\n"
-" qualsevol versió posterior.\n"
"\n"
-" Aquest programa és distribueix amb l'esperança que serà útil,\n"
-" però SENSE CAP GARANTIA; sense ni tant sols la garantia implícita de\n"
-" MERCANTIBILITAT o CAPACITAT DE REALITZAR UN DETERMINAT PROPÒSIT. Mireu la\n"
-" 'GNU General Public License' per a més detalls.\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
"\n"
-" Hauríeu d'haver rebut una còpia de la 'GNU General Public License'\n"
-" amb el programa; si no és així, escriviu a la Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
+msgstr ""
-#: ../../steps.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Exit install"
-msgstr "Surt de la instal·lació"
+msgid "Costa Rica"
+msgstr "Costa Rica"
#
-#: ../../steps.pm:1
-#, fuzzy, c-format
-msgid "Install updates"
-msgstr "Instal·la actualitzacions del sistema"
-
-#: ../../steps.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Configure services"
-msgstr "Configura els serveis"
+msgid "Use libsafe for servers"
+msgstr "Empra libsafe per als servidors"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configure X"
-msgstr "Configura l'X"
+msgid "Icelandic"
+msgstr "Islandès"
-#: ../../steps.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Install bootloader"
-msgstr "Instal·la el carregador de l'arrencada"
+msgid ""
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
-#: ../../steps.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Configure networking"
-msgstr "Configura la xarxa"
+msgid "Please relog into %s to activate the changes"
+msgstr "Si us plau, torneu a entrar a %s per activar els canvis"
-#: ../../steps.pm:1
+#: ../../my_gtk.pm:1
#, c-format
-msgid "Add a user"
-msgstr "Afegeix un usuari"
-
-#: ../../steps.pm:1
-#, fuzzy, c-format
-msgid "Root password"
-msgstr "Sense contrasenya"
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-#: ../../steps.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Install system"
-msgstr "Instal·la el sistema"
+msgid "Lilo/grub mode"
+msgstr "Mode LILO/Grub"
-#: ../../steps.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Choose packages to install"
-msgstr "Paquets a instal·lar"
+msgid "Output"
+msgstr "Sortida"
-#: ../../steps.pm:1
+#: ../../loopback.pm:1
#, c-format
-msgid "Format partitions"
-msgstr "Formata les particions"
-
-#
-#: ../../steps.pm:1
-#, fuzzy, c-format
-msgid "Partitioning"
-msgstr "Impressió"
+msgid "Circular mounts %s\n"
+msgstr "Muntatges circulars %s\n"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose your keyboard"
-msgstr "Escolliu el vostre teclat"
+msgid "Martinique"
+msgstr "Martinica"
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Select installation class"
-msgstr "Tipus d'instal·lació"
+msgid "HardDrive / NFS"
+msgstr "Disc Dur / NFS"
-#: ../../steps.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Hard drive detection"
-msgstr "Detecció del disc dur"
+msgid "a number"
+msgstr "un número"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configure mouse"
-msgstr "Configura el ratolí"
+msgid "Swedish"
+msgstr "Suec"
-#: ../../steps.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "License"
-msgstr ""
+msgid "Which %s driver should I try?"
+msgstr "Quin controlador de %s he de provar?"
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid ""
+"You will receive an alert if one of the selected services is no longer "
+"running"
+msgstr "Rebreu un avís si algun dels serveis seleccionats deixa de funcionar"
+
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Language"
-msgstr "Escolliu el vostre idioma"
+msgid "Filesystem types:"
+msgstr "Tipus de sistema de fitxers:"
-#: ../../ugtk2.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "utopia 25"
-msgstr ""
+msgid ", multi-function device on HP JetDirect"
+msgstr ", dispositiu multifunció en HP JetDirect"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "OK"
-msgstr "D'acord"
+msgid "Northern Mariana Islands"
+msgstr "Illes Marianes del Nord"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "logdrake"
-msgstr "logdrake"
+msgid "none"
+msgstr "cap"
-#: ../../ugtk.pm:1
+#
+#: ../../standalone/drakperm:1
#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgid "user :"
+msgstr "usuari :"
-#: ../../Xconfig/card.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (instal·lació del controlador de pantalla)"
+msgid "Please enter your password"
+msgstr "Si us plau, introduïu la contrasenya"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
msgstr ""
-"La vostra targeta pot tenir acceleració 3D de maquinari amb l'Xfree %s,\n"
-"TINGUEU EN COMPTE QUE ES TRACTA D'UN SUPORT EXPERIMENTAL; L'ORDINADOR ES POT "
-"PENJAR."
+"Nom del perfil a crear (el nou perfil es crea com una còpia de l'actual):"
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s amb acceleració 3D de maquinari EXPERIMENTAL"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Floppy"
+msgstr "Disquet d'arrencada"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"La vostra targeta pot tenir acceleració 3D de maquinari amb l'Xfree %s."
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "Marqueu aquesta opció si voleu esborrar el suport RW (1a sessió)"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "Xfree %s amb acceleració 3D de maquinari"
+msgid "Ghostscript referencing"
+msgstr "referenciat Ghostscript"
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"La vostra targeta pot tenir acceleració 3D de maquinari, però només amb "
-"l'Xfree %s,\n"
-"TINGUEU EN COMPTE QUE ES TRACTA D'UN SUPORT EXPERIMENTAL; L'ORDINADOR ES POT "
-"PENJAR.\n"
-"L'XFree %s, que pot tenir un suport millor en 2D, suporta la vostra targeta."
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Bootloader"
+msgstr "Carregador de l'arrencada a utilitzar"
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"La vostra targeta pot tenir acceleració 3D de maquinari, però només amb "
-"l'Xfree %s.\n"
-"L'XFree %s, que pot tenir un suport millor en 2D, suporta la vostra targeta."
+msgid "Move"
+msgstr "Mou"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
+msgid "Bootloader to use"
+msgstr "Carregador de l'arrencada a utilitzar"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Configura només la targeta \"%s\"%s"
+msgid "SMB server host"
+msgstr "Ordinador central del servidor SMB"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Name Servers:"
+msgstr "Servidor Samba"
+
+#: ../../install_messages.pm:1
#, c-format
-msgid "Use Xinerama extension"
-msgstr "Utilitza l'extensió Xinerama"
+msgid ""
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
+msgstr ""
+"\n"
+"Warning\n"
+"\n"
+"Si us plau, llegiu atentament les clàusules següents. Si no esteu\n"
+"d'acord amb qualsevol d'elles, no esteu autoritzat a instal·lar\n"
+"els CD següents. Premeu 'Rebutja' per continuar la instal·lació\n"
+"sense utilitzar aquests CD.\n"
+"\n"
+"\n"
+"Alguns dels components que s'inclouen en aquest CD no estan\n"
+"regits per la llicència GPL o acords semblants. Cadascun d'aquests\n"
+"components es regeix per les clàusules i condicions de la seva\n"
+"pròpia llicència específica. Si us plau, llegiu atentament i\n"
+"accepteu aquestes llicències específiques abans d'utilitzar o\n"
+"redistribuir els components esmentats. En general, aquestes\n"
+"llicències impedeixen la transferència, duplicació (excepte amb\n"
+"la finalitat de fer-ne còpies de seguretat), redistribució,\n"
+"enginyeria inversa, desassemblatge, decompilació o modificació del\n"
+"component. Qualsevol violació de l'acord finalitzarà immediatament\n"
+"els vostres drets sobre la llicència específica. Tret que la\n"
+"llicència específica us en garanteixi els drets, normalment no\n"
+"podreu instal·lar els programes en més d'un sistema, ni adaptar-lo\n"
+"per utilitzar-lo en una xarxa. En cas de dubte, poseu-vos en\n"
+"contacte directament amb el distribuïdor o editor del component.\n"
+"La transferència a terceres parts i la còpia d'aquests components,\n"
+"incloent la documentació, estan en general prohibides.\n"
+"\n"
+"\n"
+"Tots els drets sobre els components del CD següent pertanyen als\n"
+"seus autors respectius i estan protegits per les lleis de\n"
+"propietat intel·lectual i de copyright aplicables als programes\n"
+"informàtics.\n"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configure all heads independently"
-msgstr "Configura tots els capçals independentment"
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Suprimeix aquesta impressora de Star Office/OpenOffice.org/GIMP"
-#: ../../Xconfig/card.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Quina configuració de l'XFree voleu tenir?"
+msgid ""
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
+msgstr ""
+"El Servidor Virtual de Linux (LVS) s'usa per construir un servidor de \n"
+"gran capacitat i robustesa."
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "XFree configuration"
-msgstr "Configuració de l'XFree"
+msgid "4 billion colors (32 bits)"
+msgstr "4.294 milions de colors (32 bits)"
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Seleccioneu la mida de la memòria de la vostra targeta gràfica"
+msgid "Micronesia"
+msgstr "Micronèsia"
-#: ../../Xconfig/card.pm:1
-#, fuzzy, c-format
-msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+#: ../../steps.pm:1
+#, c-format
+msgid "License"
msgstr ""
-"El vostre sistema permet l'ús d'una configuració de múltiples capçals.\n"
-"Què voleu fer?"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Multi-head configuration"
-msgstr "Configuració Multi-head"
-
-#: ../../Xconfig/card.pm:1
-#, fuzzy, c-format
-msgid "Choose an X server"
-msgstr "Escolliu un servidor X"
+msgid "This may take a moment to generate the keys."
+msgstr "La generació de les claus pot trigar una estona."
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "X server"
-msgstr "Servidor X"
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgstr "Detecció automàtica de la impressora (local, TCP/Socket i SMB)"
-#
-#: ../../Xconfig/card.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "64 MB or more"
-msgstr "64 MB o més"
+msgid "Sagem (using pppoa) usb"
+msgstr ""
-#
-#: ../../Xconfig/card.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "32 MB"
-msgstr "32 MB"
+msgid ""
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
+msgstr ""
+"S'ha produït un error: no s'han trobat dispositius vàlids on crear nous "
+"sistemes de fitxers. Si us plau, comproveu el vostre maquinari per trobar el "
+"problema"
#
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "8 MB"
-msgstr "8 MB"
+msgid "Starting the printing system at boot time"
+msgstr "S'està iniciant el sistema d'impressió en arrencar l'ordinador"
-#: ../../Xconfig/card.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "4 MB"
-msgstr "4 MB"
+msgid "Do you want to start the connection at boot?"
+msgstr "Voleu iniciar la connexió en arrencar?"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "2 MB"
-msgstr "2 MB"
+msgid "Processor ID"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "1 MB"
-msgstr "1 MB"
+msgid "Sound trouble shooting"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "512 kB"
-msgstr "512 kB"
+msgid "Polish (qwerty layout)"
+msgstr "Polonès (disposició qwerty)"
-#: ../../Xconfig/card.pm:1
+#
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "256 kB"
-msgstr "256 kB"
+msgid "activate now"
+msgstr "Activa'l ara"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
"\n"
-"%s"
+"Drakbackup activities via CD:\n"
+"\n"
msgstr ""
-"Voleu conservar els canvis?\n"
-"La configuració actual és:\n"
"\n"
-"%s"
+"Activitats del Drakbackup a través del CD:\n"
+"\n"
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Options"
-msgstr "Opcions"
+msgid ""
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
+msgstr ""
+"Ara s'instal·larà el sistema d'impressió %s en un sistema que s'executa en "
+"el nivell de seguretat %s.\n"
+"\n"
+"Aquest sistema d'impressió executa un dimoni (procés en segon pla) que "
+"espera els treballs d'impressió i els gestiona. Aquest dimoni és accessible "
+"per ordinadors remots connectats a la xarxa i, per tant, és un possible punt "
+"d'atac. Per tant, només s'arrenquen per defecte uns pocs dimonis triats en "
+"aquest nivell de seguretat.\n"
+"\n"
+"Realment voleu configurar la impressió en aquest ordinador?"
-#: ../../Xconfig/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Test"
-msgstr "Test"
+msgid "Host \"%s\", port %s"
+msgstr "Ordinador central \"%s\", port %s"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Resolution"
-msgstr "Resolució"
+msgid "This partition can't be used for loopback"
+msgstr "Aquesta partició no es pot utilitzar per al loopback"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Monitor"
-msgstr "Monitor"
+msgid "File already exists. Use it?"
+msgstr "El fitxer ja existeix. El voleu utilitzar?"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Graphic Card"
-msgstr "Targeta gràfica"
+msgid "received: "
+msgstr ""
-#: ../../Xconfig/monitor.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Vertical refresh rate"
-msgstr "Velocitat de refresc vertical"
+msgid "Right Alt key"
+msgstr "Tecla d'Alternativa Gràfica"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Velocitat de refresc horitzontal"
+msgid "the list of alternative drivers for this sound card"
+msgstr "la llista de controladors alternatius per a aquesta targeta de so"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Els dos paràmetres més importants son la velocitat de refresc vertical, que\n"
-"és la velocitat a què es refresca tota la pantalla, i el més important, la\n"
-"velocitat de sincronització horitzontal, que és la velocitat a què es\n"
-"visualitzen les línies d'exploració.\n"
-"\n"
-"És MOLT IMPORTANT que no especifiqueu un tipus de monitor amb un rang\n"
-"de sincronització superior a les possibilitats del vostre monitor, perquè\n"
-"el podríeu fer malbé.\n"
-"En cas de dubte, sigueu conservador amb aquest paràmetre."
+msgid "Gateway"
+msgstr "Passarel·la"
-#: ../../Xconfig/monitor.pm:1
-#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr "L'exploració Plug'n'Play ha fallat. Especifiqueu un monitor"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scanner sharing"
+msgstr "Compartició de fitxers"
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Vendor"
-msgstr "Venedor"
+msgid "Tonga"
+msgstr "Tonga"
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Plug'n Play"
-msgstr "Plug'n'Play"
+msgid "Tunisia"
+msgstr "Tunísia"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose a monitor"
-msgstr "Escolliu un monitor"
+msgid "Profile: "
+msgstr "Perfil: "
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Graphics card: %s"
-msgstr "Targeta gràfica: %s"
+msgid ""
+"Click on a device in the left tree in order to display its information here."
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Escolliu la resolució i la profunditat de color"
+msgid "XawTV isn't installed!"
+msgstr "No teniu instal·lat XawTV!"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Resolutions"
-msgstr "Resolucions"
+msgid ""
+"Create/Transfer\n"
+"backup keys for SSH"
+msgstr ""
+"Crea/Transfereix\n"
+"la còpia de seguretat de les claus per a SSH"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4.294 milions de colors (32 bits)"
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr "No incloguis fitxers crítics (passwd, group, fstab)"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 milions de colors (24 bits)"
+msgid "old static device name used in dev package"
+msgstr "nom antic de dispositiu estàtic, usat en el paquet de desenvolupament"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65.536 colors (16 bits)"
+msgid "This label is already used"
+msgstr "Aquesta etiqueta ja està en ús"
-#: ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32.768 colors (15 bits)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"Benvingut a l'auxiliar de configuració de la impressora\n"
+"\n"
+"Aquest auxiliar us ajudarà a instal·lar les impressores connectades a aquest "
+"ordinador o connectades directament a la xarxa local.\n"
+"\n"
+"Si teniu impressores connectades a aquesta màquina, endolleu-les i engegueu-"
+"les per tal de poder-les detectar automàticament. Engegueu també les "
+"impressores de la xarxa local.\n"
+"\n"
+"Noteu que la detecció automàtica d'impressores de la xarxa local triga més "
+"que la detecció d'impressores connectades directament a la màquina. Seria "
+"millor que desactivéssiu la detecció automàtica d'impressores en xarxa si no "
+"la necessiteu.\n"
+"\n"
+"Feu clic a \"Següent\" quan estigueu preparat, o a \"Cancel·la\" si no voleu "
+"configurar ara les impressores."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 colors (8 bits)"
-
-#: ../../Xconfig/test.pm:1
-#, fuzzy, c-format
-msgid "Is this the correct setting?"
-msgstr "Això és correcte?"
+msgid "After formatting partition %s, all data on this partition will be lost"
+msgstr "Després de formatar la partició %s, se'n perdran totes les dades"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d segons"
+msgid "Connection Time: "
+msgstr "Tipus de connexió: "
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
-msgstr ""
+msgid "select perm file to see/edit"
+msgstr "seleccioneu el fitxer perm que voleu veure/editar"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
+msgid ""
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
-"Avís: la comprovació d'aquesta targeta gràfica pot penjar-vos l'ordinador"
+"Si us plau, inseriu el CD-ROM d'instal·lació a la unitat i premeu "
+"'D'acord'.\n"
+"Si no el teniu, premeu 'Cancel·la' per evitar l'actualització en directe."
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Voleu comprovar la configuració?"
+msgid "Use group id for execution"
+msgstr "Usa l'identificador del grup (GID) per a l'execució"
-#: ../../Xconfig/test.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Test of the configuration"
-msgstr "Comprova la configuració"
+msgid "Choose the default user:"
+msgstr "Escolliu l'usuari per defecte:"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "What norm is your TV using?"
-msgstr "Quina norma segueix el vostre televisor?"
+msgid "Gabon"
+msgstr "Gabon"
-#: ../../Xconfig/various.pm:1
-#, c-format
+#
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
msgstr ""
-"Sembla que la vostra targeta gràfica té un connector TV-OUT.\n"
-"Pot configurar-se de manera que faci servir memòria d'imatge.\n"
-"\n"
-"A tal efecte, heu de connectar la targeta gràfica al televisor abans "
-"d'arrencar l'ordinador.\n"
-"Llavors, escolliu l'opció \"TVout\" en el carregador de l'arrencada\n"
"\n"
-"Teniu aquesta característica?"
+"Amb un servidor CUPS remot, aquí no us cal configurar cap\n"
+"impressora; les impressores es detectaran automàticament."
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
msgstr ""
-"Puc configurar el vostre ordinador de manera que executi automàticament la "
-"interfície gràfica durant l'arrencada.\n"
-"Voleu que XFree s'iniciï quan torneu a arrencar l'ordinador?"
+"Mandrake Linux pot utilitzar múltiples idiomes. Seleccioneu\n"
+"els llenguatges que volgueu instal·lar. Estaran disponibles\n"
+"quan reinicieu el sistema, després que la instal·lació s'hagi completat."
-#: ../../Xconfig/various.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Graphical interface at startup"
-msgstr "Interfície gràfica a l'inici"
+msgid "Domain"
+msgstr "Domini"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Controlador de l'XFree86: %s\n"
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "Mida exacta de la RAM, si cal (s'han trobat %d MB)"
-#: ../../Xconfig/various.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Servidor XFree86: %s\n"
+msgid ""
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
+"\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
+"\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
+msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resolució: %s\n"
+msgid "Provider dns 2 (optional)"
+msgstr "DNS 2 del proveïdor (opcional)"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Color depth: %s\n"
-msgstr "Profunditat del color: %s\n"
+msgid "Boot device"
+msgstr "Dispositiu d'arrencada"
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Memòria gràfica: %s kB\n"
+msgid "Which partition do you want to resize?"
+msgstr "A quina partició voleu canviar-li la mida?"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Targeta gràfica: %s\n"
+msgid "United States Minor Outlying Islands"
+msgstr "Illes Perifèriques Menors dels EUA"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Refresc vertical del monitor: %s\n"
+msgid "A tool to monitor your logs"
+msgstr "Eina per veure els registres"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Sincronització horitzontal del monitor: %s\n"
+msgid "Djibouti"
+msgstr "Djibouti"
-#: ../../Xconfig/various.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
+msgid "detected on port %s"
+msgstr "detectat al port %s"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Dispositiu del ratolí: %s\n"
+msgid "LPD"
+msgstr "LPD"
#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tipus de ratolí: %s\n"
+msgid "Graphics card: %s\n"
+msgstr "Targeta gràfica: %s\n"
-#: ../../Xconfig/various.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Disposició del teclat: %s\n"
+msgid "Yaboot"
+msgstr "Yaboot"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Options: %s"
-msgstr "Opcions: %s"
+msgid "Please check if you are using a DVDRAM device"
+msgstr "Marqueu aquesta opció si feu servir un dispositiu DVDRAM"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Mount point: "
-msgstr "Punt de muntatge: "
+msgid "Splash selection"
+msgstr "Selecció de pantalla de presentació"
-#: ../../diskdrake/dav.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Server: "
-msgstr "Servidor: "
+msgid "Extended partition not supported on this platform"
+msgstr "Aquesta plataforma no suporta particions ampliades"
-#: ../../diskdrake/dav.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "L'URL ha de començar per http:// o https://"
+msgid "ISDN Configuration"
+msgstr "Configuració de l'XDSI"
#
-#: ../../diskdrake/dav.pm:1
-#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Si us plau introduïu l'URL del servidor WebDAV"
-
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Mount point"
-msgstr "Punt de muntatge"
-
-#: ../../diskdrake/dav.pm:1
-#, c-format
-msgid "Server"
-msgstr "Servidor"
-
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mount"
-msgstr "Munta"
+msgid "high"
+msgstr "alt"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Unmount"
-msgstr "Desmunta"
+msgid "Internet Connection Sharing"
+msgstr "Connexió a Internet compartida"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "New"
-msgstr "Nou"
+msgid "Choose file"
+msgstr "Escolliu el fitxer"
-#: ../../diskdrake/dav.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
msgstr ""
-"WebDAV és un protocol que permet muntar un directori d'un servidor web\n"
-"localment, i tractar-lo com si fos un sistema de fitxers local (amb el "
-"benentès\n"
-"que el servidor web està configurat com a servidor WebDAV). Si voleu afegir\n"
-"punts de muntatge WebDAV, seleccioneu \"Nou\"."
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Utilitzeu \"%s\" al seu lloc"
-
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Type"
-msgstr "Tipus"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Utilitzeu primer \"Unmount\""
-
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Delete"
-msgstr "Suprimeix"
-
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Create"
-msgstr "Crea"
+"Atenció! S'ha detectat una configuració existent del tallafoc. Potser us "
+"caldrà fer algun ajustament manual després de la instal·lació."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Filesystem types:"
-msgstr "Tipus de sistema de fitxers:"
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "S'està imprimint o llegint una targeta de fotos en \"%s\""
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Empty"
-msgstr "Buit"
+msgid ""
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
+msgstr ""
+"Voleu habilitar la impressió a les impressores anteriors o a les impressores "
+"de la xarxa local?\n"
-#: ../../diskdrake/hd_gtk.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Windows"
-msgstr "Domini de Windows"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "Printer default settings"
+msgstr "Selecció del model d'impressora"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Ratolí PS2 genèric amb rodeta"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Swap"
-msgstr "Intercanvi"
+msgid "Removing old printer \"%s\"..."
+msgstr "S'està suprimint la impressora antiga \"%s\"..."
#
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Journalised FS"
-msgstr "Journalised FS"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Ext2"
-msgstr "Ext2"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Select a device !"
+msgstr "Seleccioneu un escàner"
#
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "No hard drives found"
-msgstr "No s'ha trobat cap disc dur!"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove selected server"
+msgstr "Elimina la selecció"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please click on a partition"
-msgstr "Si us plau, feu clic a una partició "
+msgid "French Southern Territories"
+msgstr "Territoris francesos del Sud"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Teniu una partició FAT gran\n"
-"(utilitzada normalment pel DOS/Windows de Microsoft).\n"
-"Suggereixo que primer en canvieu la mida\n"
-"(feu-hi clic i després feu clic a \"Canvia la mida\")"
+msgid "the vendor name of the processor"
+msgstr "el nom del venedor del dispositiu"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Choose action"
-msgstr "Trieu una acció"
+msgid "All data on this partition should be backed-up"
+msgstr "Cal fer una còpia de seguretat de totes les dades d'aquesta partició"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Wizard"
-msgstr "Auxiliar"
+msgid "Installing package %s"
+msgstr "S'està instal·lant el paquet %s"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
+msgid "Checking device and configuring HPOJ..."
msgstr ""
-"Si penseu utilitzar aboot, assegureu-vos de deixar espai lliure (amb 2048\n"
-"sectors n'hi ha prou) al començament del disc"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Si us plau, feu primer una còpia de seguretat de les vostres dades"
-
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Read carefully!"
-msgstr "Llegiu-ho atentament!"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Encryption key (again)"
-msgstr "Clau de xifratge (un altre cop)"
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
+msgstr ""
+"Si voleu tenir més particions, suprimiu-ne una per poder crear una partició "
+"ampliada"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Encryption key"
-msgstr "Clau de xifratge"
+msgid ""
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
+msgstr ""
+"La impressora ha estat configurada automàticament per permetre-us l'accés "
+"als dispositius de targetes de fotos del vostre PC. Ara podeu accedir a les "
+"targetes de fotos emprant l'eina gràfica \"MtoolsFM\" (menú \"Aplicacions\" -"
+"> \"Eines d'arxivament\" -> \"Gestor de fitxers MTools\") o les utilitats de "
+"la línia d'ordres \"mtools\" (introduïu \"man mtools\" a la línia d'ordres "
+"per a més informació). Trobareu el sistema de fitxers de la targeta sota la "
+"lletra d'unitat \"p:\", o a les lletres següents si teniu més d'una "
+"impressora HP amb unitats de targetes de fotos. Al \"MToolsFM\" podeu "
+"explorar les diferents lletres d'unitat amb el camp que es troba a la "
+"cantonada superior dreta de les llistes de fitxers."
-#
-#: ../../diskdrake/interactive.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "The encryption keys do not match"
-msgstr "Les claus de xifratge no coincideixen"
+msgid "Choose packages to install"
+msgstr "Paquets a instal·lar"
-# c-format
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
+msgid ""
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
msgstr ""
-"Aquesta clau de xifratge és massa senzilla (ha de tenir com a mínim %d "
-"caràcters)"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "Escolliu la clau de xifratge del sistema de fitxers"
+"\n"
+" Alguns errors durant el procés de sendmail són causats per \n"
+" una configuració dolenta de postfix. Per resoldre-ho hauríeu de\n"
+" definir myhostname o mydomain en /etc/postfix/main.cf\n"
+"\n"
-#
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Filesystem encryption key"
-msgstr "Clau de xifratge del sistema de fitxers: "
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr ""
+"Es perdran TOTES les particions, i les dades que contenen, de la unitat %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Type: "
-msgstr "Tipus: "
+msgid ""
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
+msgstr ""
+"Al vostre sistema no li queda prou espai per a la instal·lació o "
+"actualització (%d > %d)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "on channel %d id %d\n"
-msgstr "al canal %d amb id %d\n"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
+msgstr ""
+"Cada impressora necessita un nom (per exemple \"impressora\"). Els camps de "
+"Descripció i Ubicació no són necessaris. Són comentaris per als usuaris."
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tipus de taula de particions: %s\n"
+msgid ""
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Discs LVM %s\n"
+msgid "Bhutan"
+msgstr "Bhutan"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Info: "
-msgstr "Informació: "
+msgid "Network interface"
+msgstr "Interfície de la xarxa"
-#: ../../diskdrake/interactive.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometria: %s cilindres, %s capçals, %s sectors\n"
+msgid "Reading printer data..."
+msgstr "S'estan llegint dades de la impressora..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Size: %s\n"
-msgstr "Mida: %s\n"
+msgid "Korean keyboard"
+msgstr "Teclat coreà"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Read-only"
-msgstr "Només lectura"
+msgid "Not connected"
+msgstr "Sense connexió"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Device: "
-msgstr "Dispositiu: "
+msgid "Greek"
+msgstr "Grec"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
msgstr ""
-"\n"
-"Aquesta partició especial\n"
-"Bootstrap és per arrencar\n"
-"el vostre sistema en dual.\n"
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
+#: ../../lang.pm:1
+#, c-format
+msgid "Saint Kitts and Nevis"
+msgstr "Saint Christopher i Nevis"
+
+#: ../../standalone/drakbackup:1
+#, c-format
msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
msgstr ""
+"La transferència s'ha completat amb èxit\n"
+"Comproveu que podeu entrar al servidor amb:\n"
"\n"
-"És possible que aquesta partició sigui\n"
-"una partició de Controladors;\n"
-"és millor que no la toqueu.\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"sense que se us demani una contrasenya."
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nom del fitxer de loopback: %s"
+msgid "Enable OF Boot?"
+msgstr "Voleu habilitar l'arrencada des d'OF?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Discs RAID %s\n"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "No podeu utilitzar el JFS per a particions inferiors a 16 MB"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Chunk size %s\n"
-msgstr "Mida del fragment %s\n"
+msgid "Monitor VertRefresh: %s\n"
+msgstr "Refresc vertical del monitor: %s\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Level %s\n"
-msgstr "Nivell %s\n"
+msgid "path"
+msgstr "camí"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partició arrencada per defecte\n"
-" (per a l'arrencada de l'MS-DOS, no per a LILO)\n"
+msgid "Mount point"
+msgstr "Punt de muntatge"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
msgid ""
-"Loopback file(s):\n"
-" %s\n"
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
msgstr ""
-"Fitxer(s) de loopback:\n"
-" %s\n"
-#: ../../diskdrake/interactive.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+msgid "Restore system"
+msgstr "Restaura el sistema"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Mounted\n"
-msgstr "Muntat\n"
+msgid ""
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Not formatted\n"
-msgstr "Sense formatar\n"
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "The DHCP end ip"
+msgstr "L'adreça final del rang del DHCP"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Formatted\n"
-msgstr "Formatat\n"
+msgid "Another one"
+msgstr "Un altre"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cilindre %d a %d\n"
+msgid "Drakbackup"
+msgstr "Drakbackup"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ", %s sectors"
-msgstr ", %s sectors"
+msgid "Colombia"
+msgstr "Colòmbia"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Size: %s"
-msgstr "Mida: %s"
+msgid ""
+"Current configuration of `%s':\n"
+"\n"
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
+msgstr ""
+"Configuració actual de '%s':\n"
+"\n"
+"Xarxa: %s\n"
+"Adreça IP: %s\n"
+"Atribució IP: %s\n"
+"Controlador: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Start: sector %s\n"
-msgstr "Inici: sector %s\n"
+msgid "Plug'n Play"
+msgstr "Plug'n'Play"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Name: "
-msgstr "Nom: "
+msgid "Reunion"
+msgstr "Reunion"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Lletra d'unitat de DOS: %s (només és una suposició)\n"
+msgid "Details"
+msgstr "Detalls"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "la partició %s ara és %s"
+#: ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "For security reasons, it will be disconnected now."
+msgstr "Per raons de seguretat, ara es desconnectarà."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Removing %s"
-msgstr "S'està esborrant %s"
+msgid "Synchronization tool"
+msgstr "Eina de sincronització"
-#: ../../diskdrake/interactive.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Copying %s"
-msgstr "S'està copiant %s"
+msgid "Checking your system..."
+msgstr "S'està comprovant el vostre sistema..."
#
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Moving files to the new partition"
-msgstr "S'estan movent els fitxers a la nova partició"
+msgid "Print"
+msgstr "Imprimeix"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
msgstr ""
-"El directori %s encara conté dades\n"
-"(%s)"
+"Inseriu la cinta amb l'etiqueta de volum %s\n"
+" al dispositiu de cinta %s"
-#
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Hide files"
-msgstr "Fitxers ocults"
+msgid "Mongolia"
+msgstr "Mongòlia"
-#
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Move files to the new partition"
-msgstr "Mou els fitxers a la nova partició"
+msgid "Mounted\n"
+msgstr "Muntat\n"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Després de formatar la partició %s, se'n perdran totes les dades"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Graphical Interface"
+msgstr "Interfície gràfica a l'inici"
-#: ../../diskdrake/interactive.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-"Us caldrà tornar a arrencar per tal que les modificacions tinguin efecte"
+msgid "Restore Users"
+msgstr "Restaura els usuaris"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "La taula de particions de la unitat %s s'escriurà al disc!"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Encryption key for %s"
+msgstr "Clau de xifratge"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "Cal instal·lar el paquet %s. Voleu instal·lar-lo?"
+msgid ""
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
+msgstr ""
+"El mapador de ports (portmapper) gestiona les connexions RPC, que s'usen "
+"per\n"
+"protocols com ara l'NFS i el NIS. El servidor portmap s'ha d'estar\n"
+"executant en ordinadors que actuen com a servidors per a protocols que\n"
+"utilitzen el mecanisme RPC."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "What type of partitioning?"
-msgstr "Quin tipus de particionament voleu?"
+msgid "Detected hardware"
+msgstr "S'ha detectat el següent maquinari"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Aneu amb compte: aquesta operació és perillosa."
+msgid "Mauritius"
+msgstr "Maurici"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "chunk size"
-msgstr "mida del fragment"
+msgid "Myanmar (Burmese)"
+msgstr "Myanmar (Burmese)"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "level"
-msgstr "nivell"
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid "Enabling swap partition %s"
+msgstr "S'està formatant la partició %s"
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
-#, c-format
-msgid "device"
-msgstr "dispositiu"
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgstr ""
+"No hi ha cap partició FAT a la qual canviar la mida o que es pugui utilitzar "
+"com a loopback (o no hi queda prou espai)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Various"
-msgstr "Diversos"
+msgid "Armenian (old)"
+msgstr "Armeni (antic)"
-#
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mount options"
-msgstr "Opcions de muntatge"
+msgid ""
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
+msgstr ""
+"Ja existeix una impressora amb nom \"%s\" en %s. \n"
+"Feu clic a \"Transfereix\" per sobreescriure-la.\n"
+"També podeu escriure un nom nou o ometre aquesta impressora."
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "File already exists. Use it?"
-msgstr "El fitxer ja existeix. El voleu utilitzar?"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "File is already used by another loopback, choose another one"
+msgid ""
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
msgstr ""
-"Un altre loopback ja està utilitzant el fitxer, escolliu-ne un de diferent"
+"Cerqueu les solucions als vostres problemes a través de la nostra plataforma "
+"de suport en línia"
-#
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Give a file name"
-msgstr "Proporcioneu un nom de fitxer"
+msgid ", host \"%s\", port %s"
+msgstr ", ordinador central \"%s\", port %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Filesystem type: "
-msgstr "Tipus de sistema de fitxers: "
+msgid "Monaco"
+msgstr "Mònaco"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Size in MB: "
-msgstr "Mida en MB: "
+msgid "%s formatting of %s failed"
+msgstr "%s formatació de %s ha fallat"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Loopback file name: "
-msgstr "Nom del fitxer de loopback: "
+msgid "Partitioning failed: %s"
+msgstr "Ha fallat el particionament: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Loopback"
-msgstr "Loopback"
+msgid "Canada (cable)"
+msgstr "Canadà (cable)"
-#: ../../diskdrake/interactive.pm:1
+#
+#: ../../help.pm:1
#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "Aquesta partició no es pot utilitzar per al loopback"
+msgid "Upgrade"
+msgstr "Actualitza"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "LVM name?"
-msgstr "Nom LVM?"
+msgid "Workstation"
+msgstr "Estació de treball"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "new"
-msgstr "nou"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"S'està instal·lant el paquet %s\n"
+"%d%%"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Escolliu un LVM existent al qual afegir-ho"
+msgid "Kyrgyzstan"
+msgstr "Kirguizistan"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Escolliu un RAID existent al qual afegir-ho"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "With basic documentation"
+msgstr "Amb la documentació bàsica (recomanat!)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Moving partition..."
-msgstr "S'està movent la partició..."
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anacron, un programador d'ordres periòdiques."
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Moving"
-msgstr "S'està movent"
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"Heu de tenir una partició arrel.\n"
+"Per fer-ho, creeu una partició (o feu clic a una d'existent).\n"
+"Després, trieu l'acció \"Punt de muntatge\" i doneu-li el valor '/'"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "A quin sector ho voleu moure?"
+msgid "Proxy should be http://..."
+msgstr "El servidor intermediari ha de ser http://..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Sector"
-msgstr "Sector"
+msgid "South Africa"
+msgstr "Sud-àfrica"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "A quin disc ho voleu moure?"
+msgid "Western Sahara"
+msgstr "Sàhara Occidental"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Move"
-msgstr "Mou"
+msgid "Etherboot Floppy/ISO"
+msgstr "Disquet/ISO per a Etherboot"
#
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New size in MB: "
-msgstr "Nova mida en MB: "
+msgid "Modify printer configuration"
+msgstr "Modifica la configuració de la impressora"
+#
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Choose the new size"
-msgstr "Escolliu la nova mida"
+msgid "Choose a partition"
+msgstr "Trieu una partició"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Resize"
-msgstr "Canvia la mida"
+msgid "Edit current rule"
+msgstr "Edita la regla actual"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
+msgid "%s"
msgstr ""
-"Després de canviar la mida de la partició %s, se'n perdran totes les dades"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Cal fer una còpia de seguretat de totes les dades d'aquesta partició"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "This partition is not resizeable"
-msgstr "No es pot canviar la mida d'aquesta partició"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "S'estan calculant els límits del sistema de fitxers de la FAT"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "On voleu muntar %s?"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
msgstr ""
-"No es pot anul·lar el punt de muntatge, perquè aquesta partició\n"
-"s'utilitza per al loopback. Elimineu primer el loopback"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "On voleu muntar el dispositiu %s?"
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "On voleu muntar el fitxer de loopback %s?"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "S'està canviant de ext2 a ext3"
-
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#, c-format
-msgid "Which filesystem do you want?"
-msgstr "Quin sistema de fitxers voleu?"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Change partition type"
-msgstr "Canvia el tipus de partició"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Després de canviar el tipus de la partició %s, se'n perdran totes les dades"
+msgid "Please test the mouse"
+msgstr "Si us plau, comproveu el ratolí."
#
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Remove the loopback file?"
-msgstr "Voleu suprimir el fitxer de loopback?"
+msgid "Other Media"
+msgstr "Altres suports"
-#: ../../diskdrake/interactive.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
-msgstr ""
-"No podeu crear una nova partició\n"
-"(perquè heu arribat al màxim nombre de particions primàries).\n"
-"Esborreu primer una partició primària i creeu una partició ampliada."
+msgid "Backup system files"
+msgstr "Còpia de seguretat dels fitxers de sistema"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Preference: "
-msgstr "Preferència: "
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Start sector: "
-msgstr "Sector d'inici: "
+msgid "Sector"
+msgstr "Sector"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Create a new partition"
-msgstr "Crea una nova partició"
+msgid "Qatar"
+msgstr "Qatar"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use for loopback"
-msgstr "Utilitza per a loopback"
+msgid "LDAP Base dn"
+msgstr "LDAP Base dn"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Modify RAID"
-msgstr "Modifica el RAID"
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr ""
+"No podeu seleccionar aquest paquet perquè no queda prou espai per instal·lar-"
+"lo"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Remove from LVM"
-msgstr "Elimina de l'LVM"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "generate auto-install floppy"
+msgstr "Genera un disquet per a la instal·lació automàtica"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Remove from RAID"
-msgstr "Elimina del RAID"
+msgid "Dialing mode"
+msgstr "Mode de marcatge"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Add to LVM"
-msgstr "Afegeix a l'LVM"
+msgid "File sharing"
+msgstr "Compartició de fitxers"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Add to RAID"
-msgstr "Afegeix al RAID"
+msgid "Clean /tmp at each boot"
+msgstr "Buida /tmp en cada arrencada"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Format"
-msgstr "Formata"
+msgid "Malawi"
+msgstr "Malawi"
#
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Detailed information"
-msgstr "Informació detallada"
+msgid "Please choose your type of mouse."
+msgstr "Si us plau, seleccioneu el tipus del vostre ratolí."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Trying to rescue partition table"
-msgstr "S'està intentant recuperar la taula de particions"
+msgid "class of hardware device"
+msgstr "tipus de dispositiu de maquinari"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
msgstr ""
-"Inseriu un disquet a la unitat\n"
-"Se'n perdran totes les dades"
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Warning"
-msgstr "Advertència"
+msgid "United Kingdom"
+msgstr "Regne Unit"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Select file"
-msgstr "Seleccioneu el fitxer"
+msgid "running"
+msgstr "s'està executant"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"La còpia de seguretat de la taula de particions no té la mateixa mida\n"
-"Voleu continuar igualment?"
+msgid "default"
+msgstr "predeterminat"
-#
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Removable media automounting"
-msgstr "Muntatge automàtic dels dispositius extraïbles"
+msgid "Indonesia"
+msgstr "Indonèsia"
#
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Reload partition table"
-msgstr "Torna a carregar la taula de particions"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Rescue partition table"
-msgstr "Recupera la taula de particions"
+msgid "France [SECAM]"
+msgstr "França [SECAM]"
-#
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Restore partition table"
-msgstr "Restaura la taula de particions"
+msgid "restrict"
+msgstr "limita"
-#
-#: ../../diskdrake/interactive.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Save partition table"
-msgstr "Escriu la taula de particions"
+msgid "must have"
+msgstr "s'ha de tenir"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
msgstr ""
-"Si voleu tenir més particions, suprimiu-ne una per poder crear una partició "
-"ampliada"
+"CUPS no permet l'ús d'impressores en servidors Novell ni que les impressores "
+"enviïn les dades dins d'una ordre formada arbitràriament.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "I can't add any more partition"
-msgstr "No es pot afegir cap més partició"
+msgid "Senegal"
+msgstr "Senegal"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "All primary partitions are used"
-msgstr "S'utilitzen totes les particions primàries"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Command line"
+msgstr "Nom de domini"
-#
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
-msgid "Hard drive information"
-msgstr "Informació del disc dur"
+msgid ""
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
+msgstr ""
+"Trobareu tot el conjunt de solucions Linux, així com ofertes especials en "
+"productes i altres avantatges, a la nostra botiga en línia:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Auto allocate"
-msgstr "Assigna automàticament"
+msgid "access to administrative files"
+msgstr "accés a fitxers administratius"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Clear all"
-msgstr "Buida-ho tot"
+msgid ""
+"Error during sendmail.\n"
+" Your report mail was not sent.\n"
+" Please configure sendmail"
+msgstr ""
+"S'ha produït un error en enviar el correu.\n"
+" El vostre informe no ha estat enviat.\n"
+" Si us plau configureu el sendmail"
-#
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Voleu desar les modificacions a /etc/fstab"
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ", dispositiu multifunció en port paral·lel \\/*%s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Voleu sortir sense escriure la taula de particions?"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Quit without saving"
-msgstr "Surt sense desar"
+msgid "Montserrat"
+msgstr "Montserrat"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Continue anyway?"
-msgstr "Voleu continuar igualment?"
+msgid "Automatic dependencies"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Toggle to expert mode"
-msgstr "Canvia al mode expert"
+msgid "Swap"
+msgstr "Intercanvi"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Toggle to normal mode"
-msgstr "Canvia al mode normal"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connecting to the Internet "
+msgstr "Connecta't a Internet"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Undo"
-msgstr "Desfés"
+msgid "Restore Other"
+msgstr "Restaura altres"
-#
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Exit"
-msgstr "Surt"
+msgid "TV card"
+msgstr "Targeta de TV"
#
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Choose a partition"
-msgstr "Trieu una partició"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "Impressora en servidor SMB/Windows 95/98/NT"
-#
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Choose another partition"
-msgstr "Trieu una altra partició"
+msgid ", "
+msgstr ""
-#
-#: ../../diskdrake/removable.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Change type"
-msgstr "Canvia el tipus"
+msgid ""
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
+msgstr ""
#
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Search servers"
-msgstr "Cerca servidors"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove selected host/network"
+msgstr "Elimina la selecció"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#
+#: ../../services.pm:1
#, c-format
-msgid "Domain"
-msgstr "Domini"
+msgid ""
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
+msgstr ""
+"El Postfix és un Agent de Transport de Correu, que és el programa que passa "
+"el correu d'un ordinador a un altre."
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Username"
-msgstr "Nom d'usuari"
+msgid "Disconnection from the Internet failed."
+msgstr ""
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../keyboard.pm:1
#, c-format
msgid ""
-"Please enter your username, password and domain name to access this host."
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
msgstr ""
-"Introduïu el vostre nom d'usuari, la contrasenya i el nom de domini per "
-"accedir a aquesta màquina."
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Domain Authentication Required"
-msgstr "Cal l'autenticació de domini"
+"Aquí podeu triar la tecla o la combinació de tecles que \n"
+"permetran canviar entre diferents disposicions de teclat\n"
+"(p.ex.: llatina i no llatina)"
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Another one"
-msgstr "Un altre"
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Network Hotplugging"
+msgstr "Configuració de xarxa"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Which username"
-msgstr "Quin nom d'usuari?"
+msgid "if set to yes, reports check result to tty."
+msgstr ""
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Can't login using username %s (bad password?)"
-msgstr ""
-"No es pot entrar amb el nom d'usuari %s (potser la contrasenya és "
-"incorrecta?)"
+msgid "Restore From CD"
+msgstr "Restaura des de CD"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "cpu # "
+msgid ""
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
+"Ara es configurarà l'ordinador per tal que comparteixi la connexió a "
+"Internet.\n"
+"Amb aquesta característica, altres ordinadors de la vostra xarxa local\n"
+"podran utilitzar la connexió a Internet d'aquest ordinador.\n"
+"\n"
+"Assegureu-vos d'haver configurat l'accés a Internet i a la xarxa local amb "
+"el drakconnect abans de continuar.\n"
+"Nota: per configurar una xarxa d'àrea local (LAN), us cal un adaptador de "
+"xarxa dedicat."
-#: ../../harddrake/data.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "SMBus controllers"
+msgid ""
+"Please choose which network adapter you want to use to connect to Internet."
msgstr ""
+"Si us plau, seleccioneu quin adaptador de xarxa voleu utilitzar per\n"
+"connectar-vos a Internet."
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "USB controllers"
+msgid "Photo memory card access on your HP multi-function device"
msgstr ""
-#: ../../harddrake/data.pm:1
-#, c-format
-msgid "SCSI controllers"
+#: ../../share/advertising/09-mdksecure.pl:1
+#, fuzzy, c-format
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
msgstr ""
+"MandrakeSoft treballa al costat d'un conjunt d'empreses que ofereixen "
+"solucions professionals compatibles amb el Mandrake Linux. Trobareu una "
+"llista d'aquests socis al MandrakeStore"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Firewire controllers"
-msgstr ""
+msgid "Internet Connection Sharing is now disabled."
+msgstr "Ara, la compartició de la connexió a Internet està inhabilitada."
-#: ../../harddrake/data.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "(E)IDE/ATA controllers"
+msgid "if set to yes, verify checksum of the suid/sgid files."
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Joystick"
-msgstr ""
+msgid "Latin American"
+msgstr "Espanyol sud-americà"
#
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Scanner"
-msgstr "Seleccioneu un escàner"
-
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Unknown/Others"
-msgstr "Desconegut|Genèric"
+msgid "Japanese text printing mode"
+msgstr "Modifica el sistema d'impressió"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Bridges and system controllers"
-msgstr ""
+msgid "Old device file"
+msgstr "Fitxer de dispositiu antic"
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Modem"
-msgstr "Model"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Info: "
+msgstr "Informació: "
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Ethernetcard"
-msgstr "Targeta Ethernet"
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Button `%s': %s"
+msgstr "Botó '%s': %s"
-#: ../../harddrake/data.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Processors"
-msgstr ""
+msgid "Please wait"
+msgstr "Espereu si us plau"
-#: ../../harddrake/data.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Webcam"
-msgstr ""
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Soundcard"
-msgstr "Targeta de so"
+msgid "None"
+msgstr "Fet"
#
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Other MultiMedia devices"
-msgstr "Altres suports"
-
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Tvcard"
-msgstr "Targeta de TV"
-
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Videocard"
-msgstr "Mode de vídeo"
-
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
-#, c-format
-msgid "Tape"
-msgstr "Cinta"
+msgid "The entered IP is not correct.\n"
+msgstr "El model és correcte"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "DVD-ROM"
-msgstr ""
+msgid "Ethernet Card"
+msgstr "Targeta Ethernet"
-#: ../../harddrake/data.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "CD/DVD burners"
-msgstr ""
-
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "CDROM"
-msgstr "en CDROM"
-
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Disk"
-msgstr "Danès"
+msgid "Info"
+msgstr "Informació"
-#: ../../harddrake/data.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Zip"
-msgstr ""
+msgid "Install"
+msgstr "Instal·la"
-#: ../../harddrake/data.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Floppy"
-msgstr "Disquet d'arrencada"
-
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Let me pick any driver"
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
msgstr ""
+"Feu clic a \"D'acord\" si voleu suprimir totes les dades i particions\n"
+"que hi ha en aquesta unitat de disc. Aneu amb compte perquè, un cop\n"
+"hagueu fet clic a \"D'acord\", no podreu recuperar cap dada ni partició\n"
+"del disc, incloent les dades de Windows.\n"
+"\n"
+"Feu clic a \"Cancel·la\" per anul·lar aquesta operació sense perdre cap "
+"dada\n"
+"ni partició d'aquest disc."
-#: ../../harddrake/sound.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Driver:"
-msgstr "Controlador:"
+msgid "Exit install"
+msgstr "Surt de la instal·lació"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
msgstr ""
+"Ja està tot configurat.\n"
+"Ara podeu compartir la connexió a Internet amb altres ordinadors de la "
+"vostra xarxa d'àrea local utilitzant la configuració automàtica de xarxa "
+"(DHCP)."
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr ""
+msgid "Remote CUPS server"
+msgstr "Servidor CUPS remot"
-#: ../../harddrake/sound.pm:1
+#: ../../mouse.pm:1
+#, c-format
+msgid "Sun - Mouse"
+msgstr "Ratolí de Sun"
+
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
+"There is only one configured network adapter on your system:\n"
"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
+"%s\n"
"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
+"I am about to setup your Local Area Network with that adapter."
+msgstr ""
+"Només teniu un adaptador de xarxa configurat al sistema:\n"
"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"%s\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
-msgstr ""
+"Ara es configurarà la vostra xarxa d'àrea local amb aquest adaptador."
-#: ../../harddrake/sound.pm:1
+#
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Sound trouble shooting"
-msgstr ""
+msgid "Minimal install"
+msgstr "Instal·lació mínima"
-#: ../../harddrake/sound.pm:1
-#, fuzzy, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "No hi ha cap controlador conegut per a la vostra targeta de so (%s)"
+#: ../../lang.pm:1
+#, c-format
+msgid "Ethiopia"
+msgstr "Etiòpia"
-#: ../../harddrake/sound.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Unkown driver"
-msgstr "Controlador desconegut"
+msgid "Devanagari"
+msgstr "Devanagari"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "No hi ha cap controlador conegut per a la vostra targeta de so (%s)"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr ""
+"- dispositius PCI: dóna la ranura PCI, el dispositiu i la funció d'aquesta "
+"targeta\n"
+"- dispositius EIDE: diu si el dispositiu ésta configurat com a mestre o com "
+"a esclau\n"
+"- dispositius SCSI: dóna el bus SCSI i els identificadors SCSI del dispositiu"
-#
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "No known driver"
-msgstr "No hi ha cap controlador conegut"
+msgid "Total size: %d / %d MB"
+msgstr "Mida total: %d / %d MB"
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-"No hi ha cap controlador OSS/ALSA alternatiu conegut per a la vostra targeta "
-"de so (%s), que actualment fa servir \"%s\""
+msgid "disabled"
+msgstr "inhabilita"
-#
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "No open source driver"
-msgstr "No hi ha cap controlador conegut"
+msgid "Search for new scanners"
+msgstr "Impressores disponibles"
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Espereu si us plau... s'està aplicant la configuració"
+msgid "Disabling servers..."
+msgstr "S'estan inhabilitant els servidors..."
-#: ../../harddrake/sound.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
+"Please choose the time \n"
+"interval between each backup"
msgstr ""
-"L'antic controlador \"%s\" ha estat desaprovat.\n"
-"\n"
-"S'ha vist que causa problemes al nucli en descarregar-se.\n"
-"\n"
-"El nou controlador \"%s\" només s'usarà en la següent arrencada."
+"Si us plau, escolliu l'interval \n"
+"de temps entre cada còpia de seguretat"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Trouble shooting"
-msgstr ""
+msgid "Installation of %s failed. The following error occured:"
+msgstr "Ha fallat la instal·lació de %s. S'ha produït l'error següent:"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakboot:1
#, c-format
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr "No s'ha pogut executar mkinitrd -f /boot/initrd-%s.img %s."
+
+#: ../../install_any.pm:1
+#, fuzzy, c-format
msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
+"You have selected the following server(s): %s\n"
"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
-msgstr ""
-"L'OSS (Sistema de So Obert) va ser la primera API de so. És una API "
-"independent del sistema operatiu (disponible en molts sistemes UNIX) però és "
-"molt bàsica i limitada.\n"
-"Encara més, tots els controladors OSS reinventen la roda...\n"
"\n"
-"L'ALSA (Arquitectura Avançada de So per a Linux) és una arquitectura modular "
-"que\n"
-"funciona amb una àmplia varietat de targetes ISA, USB i PCI.\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
"\n"
-"També proporciona una API molt més funcional que la d'OSS.\n"
"\n"
-"Per utilitzar ALSA, es pot triar entre:\n"
-"- l'antiga API compatible d'OSS\n"
-"- la nova API d'ALSA que proporciona moltes característiques millorades però "
-"que necessita fer servir la lliberia ALSA.\n"
-
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid ""
+"Do you really want to install these servers?\n"
+msgstr ""
+"Heu seleccionat el(s) següent(s) servidor(s): %s\n"
"\n"
"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
-msgstr ""
+"Aquests servidors estan activats per defecte. No tenen cap problema de "
+"seguretat\n"
+"conegut, però se'n podrien trobar de nous. Si fos així, haureu d'actualitzar-"
+"los\n"
+"el més aviat possible.\n"
"\n"
"\n"
-"La vostra targeta fa servir actualment el controlador %s \"%s\" (el "
-"controlador per defecte per a aquesta targeta és \"%s\")"
+"Voleu realment instal·lar aquests servidors?\n"
-#: ../../harddrake/sound.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr ""
-"Aquí podeu seleccionar un controlador alternatiu (tant OSS com ALSA) per ala "
-"targeta de so (%s)"
+msgid "Network printer (TCP/Socket)"
+msgstr "Impressora de xarxa (TCP/Socket)"
#
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sound configuration"
-msgstr "Configuració de so"
+msgid "Backup User files..."
+msgstr "Fes una còpia de seguretat dels fitxers d'usuari..."
-#: ../../harddrake/sound.pm:1
+#: ../../steps.pm:1
+#, c-format
+msgid "Install system"
+msgstr "Instal·la el sistema"
+
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
+msgid "First DNS Server (optional)"
+msgstr "Primer servidor DNS (opcional)"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
+"Alternatively, you can specify a device name/file name in the input line"
msgstr ""
-"No hi ha cap controlador OSS/ALSA alternatiu conegut per a la vostra targeta "
-"de so (%s), que actualment fa servir \"%s\""
+"Escolliu el port al qual està connectada la impressora o escriviu el nom de "
+"dispositiu/nom de fitxer en la línia d'entrada"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "No alternative driver"
-msgstr "No hi ha cap controlador alternatiu"
+msgid "dhcpd Config..."
+msgstr "Configuració del dhcpd..."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "enable radio support"
-msgstr "habilita l'ús de la ràdio"
+msgid "The setup has already been done, but it's currently disabled."
+msgstr "La configuració ja s'ha realitzat, però ara està inhabilitada."
-#: ../../harddrake/v4l.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Radio support:"
-msgstr "Permet l'ús de la ràdio:"
+msgid "LILO/grub Installation"
+msgstr "Instal·lació del LILO/grub"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Israeli"
+msgstr "Israelià"
#
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "PLL setting:"
-msgstr "Configuració del PLL:"
+msgid "load setting"
+msgstr "paràmetre de càrrega"
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr "nombre de memòries intermèdies per a captures amb MMAP"
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "Impressora \"%s\" en el servidor \"%s\""
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Number of capture buffers:"
-msgstr "Nombre de memòries intermèdies de captura:"
+msgid "Floppy can be removed now"
+msgstr "Ja podeu extreure el disquet"
#
-#: ../../harddrake/v4l.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Truly minimal install"
+msgstr "Instal·lació mínima"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Tuner type:"
-msgstr "Tipus de sintonitzador:"
+msgid "Denmark"
+msgstr "Dinamarca"
-#: ../../harddrake/v4l.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Card model:"
-msgstr "Model de la targeta:"
+msgid "Moving partition..."
+msgstr "S'està movent la partició..."
-#: ../../harddrake/v4l.pm:1
+#
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "(This) DHCP Server IP"
+msgstr "IP d'aquest servidor DHCP"
+
+#: ../../Xconfig/test.pm:1
#, c-format
+msgid "Test of the configuration"
+msgstr "Comprova la configuració"
+
+#
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing %s ..."
+msgstr "S'estan instal·lant els paquets..."
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
+"\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
+"\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
+"\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
+"\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
msgstr ""
-"Per a les targetes de TV més modernes, el mòdul bttv del nucli GNU/Linux "
-"detecta automàticament els paràmetres correctes.\n"
-"Si la vostra targeta no és detectada, podeu forçar el tipus de sintonitzador "
-"i de targeta aquí. Simplement seleccioneu els paràmetres necessaris per a la "
-"vostra targeta de TV"
+"Finalment, depenent de si heu seleccionat poder triar els paquets "
+"individuals\n"
+"o no, se us presentarà un arbre amb tots els paquets classificats per grups "
+"i\n"
+"subgrups. Mentre navegueu per l'arbre, podeu seleccionar grups complets,\n"
+"subgrups o paquets individuals.\n"
+"\n"
+"Cada cop que seleccioneu un paquet de l'arbre, apareix una descripció a la\n"
+"dreta. Quan hagueu acabat la selecció de paquets, cliqueu a \"Instal·la\",\n"
+"que iniciarà el procés d'instal·lació. Depenent de la velocitat del vostre \n"
+"maquinari i del número de paquets que necessitin ser instal·lats, el procés\n"
+"pot trigar una bona estona en acabar. A la pantalla es mostrarà una "
+"estimació\n"
+"del temps que durarà la instal·lació de tots els paquets, per tal ajudar-"
+"vos\n"
+"a decidir si teniu prou temps per gaudir d'una tassa de cafè.\n"
+"\n"
+"Si heu seleccionat un paquet de servidor, intencionadament o perquè formava\n"
+"part d'un grup, se us demanarà que confirmeu si realment voleu instal·lar\n"
+"aquests servidors. Sota Mandrake Linux, qualsevol servidor instal·lat "
+"s'inicia\n"
+"per defecte quan el sistema arrenca. Tot i que fossin segurs i no "
+"tinguessin\n"
+"cap problema quan es va fer la distribució, podria ser que es descobrissin\n"
+"forats de seguretat després que aquesta versió de Mandrake Linux es "
+"completés.\n"
+"Si no sabeu què se suposa que fa un servei en particular o per què s'està\n"
+"instal·lant, aleshores feu clic a \"No\". Si pitgeu \"Sí\" s'instal·laran\n"
+"els serveis llistats i s'iniciaran automàticament per defecte.\n"
+"\n"
+"L'opció de \"Dependències automàtiques\" només deshabilita el diàleg "
+"d'advertència\n"
+"que apareix quan l'instal·lador selecciona automàticament un paquet. Això\n"
+"passa perquè s'ha determinat que es necessita safisfer una dependència d'un\n"
+"altre paquet per tal que la instal·lació es completi amb èxit.\n"
+"\n"
+"La icona petita d'un disquet al final de la llista permet carregar una "
+"llista\n"
+"de paquets escollits en una instal·lació anterior. Fent clic en aquesta "
+"icona\n"
+"el sistema us demanarà que inseriu un disquet creat prèviament al final "
+"d'una\n"
+"altra instal·lació. Mireu el segon suggeriment de l'últim pas per saber com "
+"crear\n"
+"aquest tipus de disquet."
-#: ../../harddrake/v4l.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Unknown|Generic"
-msgstr "Desconegut|Genèric"
+msgid "Choose your filesystem encryption key"
+msgstr "Escolliu la clau de xifratge del sistema de fitxers"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "Desconegut|CPH06X (bt878) [molts venedors]"
+msgid ""
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
+msgstr ""
+"Seleccioneu el vostre dispositiu de CD/DVD\n"
+"(Premeu Retorn perquè aquestes opcions es propaguin a d'altres camps.\n"
+"Aquest camp no és necessari, només és una eina per omplir el formulari.)"
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "Desconegut|CPH05X (bt878) [molts venedors]"
+msgid "Andorra"
+msgstr "Andorra"
-#
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Auto-detect"
-msgstr "Detecció automàtica"
-
-#: ../../interactive/newt.pm:1
-#, fuzzy, c-format
-msgid "Do"
-msgstr "Baixa"
+msgid "Sierra Leone"
+msgstr "Sierra Leone"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Quina és la vostra elecció? (predeterminat %s)"
+msgid "Botswana"
+msgstr "Botswana"
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Elecció incorrecta, torneu-ho a intentar\n"
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "(default value: %s)"
+msgstr " (per defecte: %s)"
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Re-submit"
-msgstr "Torna a enviar"
+msgid "Alternative test page (Letter)"
+msgstr "Pàgina de prova alternativa (Carta)"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"=> Notice, a label changed:\n"
-"%s"
+"DHCP Server Configuration.\n"
+"\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
+"\n"
msgstr ""
-"=> Avís, una etiqueta ha canviat:\n"
-"%s"
+"Configuració del servidor DHCP.\n"
+"\n"
+"Aquí podreu seleccionar diverses opcions per a la configuració del servidor "
+"DHCP.\n"
+"Si no sabeu el significat d'una opció, deixeu-la com està.\n"
-#: ../../interactive/stdio.pm:1
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid "Choose an X server"
+msgstr "Escolliu un servidor X"
+
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Swap partition size in MB: "
+msgstr "Mida de la partició d'intercanvi en MB: "
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
+"Other (not drakbackup)\n"
+"keys in place already"
msgstr ""
-"Si us plau, escolliu el primer número del rang 10 que voleu editar,\n"
-"o premeu Retorn per continuar.\n"
-"Què trieu? "
+"Ja hi ha les claus d'un altre programa\n"
+"(diferent del Drakbackup)"
-#: ../../interactive/stdio.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Hi ha moltes coses per escollir de (%s).\n"
+msgid "No changes to backup!"
+msgstr "No s'ha fet cap canvi a la còpia de seguretat"
-#: ../../interactive/stdio.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Quina és la vostra elecció? (predeterminat '%s'%s)"
+msgid "Formatted\n"
+msgstr "Formatat\n"
-#: ../../interactive/stdio.pm:1
+#
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid " enter `void' for void entry"
-msgstr " entreu 'void' per entrada buida"
+msgid "Type of install"
+msgstr "Tipus d'instal·lació"
#
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do you want to click on this button?"
-msgstr "Voleu fer clic en aquest botó?"
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "Impressora \"%s\" en servidor SMB/Windows \"%s\""
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Button `%s': %s"
-msgstr "Botó '%s': %s"
+msgid ""
+"\n"
+"- Daemon (%s) include:\n"
+msgstr ""
+"\n"
+"- Dimoni (%s) inclou:\n"
-#: ../../interactive/stdio.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Quina és la vostra elecció? (0/1, predeterminat '%s')"
+msgid "%d comma separated numbers"
+msgstr "%d nombres separats per coma"
-#: ../../interactive/stdio.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Entries you'll have to fill:\n"
-"%s"
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
msgstr ""
-"Entrades que heu d'emplenar:\n"
-"%s"
+"El protocol rusers permet que els usuaris d'una xarxa identifiquin\n"
+"qui està connectat en altres ordinadors de la mateixa."
-#: ../../modules/interactive.pm:1
+#
+#: ../../standalone/drakautoinst:1
+#, c-format
+msgid "Automatic Steps Configuration"
+msgstr "Configuració automatitzada dels passos"
+
+#: ../../share/advertising/02-community.pl:1
#, c-format
msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
msgstr ""
-"Ha fallat la càrrega del mòdul %s.\n"
-"Voleu tornar-ho a intentar amb altres paràmetres?"
+"Voleu saber més coses de la comunitat del Codi Font Obert? Uniu-vos al món "
+"del Codi Font Obert"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Specify options"
-msgstr "Especifica les opcions"
+msgid "Barbados"
+msgstr "Barbados"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Autoprobe"
-msgstr "Exploració automàtica"
+msgid "Please select data to backup..."
+msgstr "Seleccioneu les dades de les quals voleu fer la còpia..."
-#: ../../modules/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
msgstr ""
-"En alguns casos, el controlador de %s necessita informació addicional\n"
-"per funcionar correctament, tot i que normalment funciona bé sense ella.\n"
-"Voleu especificar opcions addicionals o deixar que el controlador\n"
-"cerqui al vostre ordinador la informació que necessita? Aquesta recerca\n"
-"podria penjar l'ordinador, però això no causaria cap dany."
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Quin controlador de %s he de provar?"
+msgid "received"
+msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Module options:"
-msgstr "Opcions del mòdul:"
+msgid "/File/_New"
+msgstr "/Fitxer/_Nou"
-#: ../../modules/interactive.pm:1
+#
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Ara podeu proporcionar les opcions per al mòdul %s.\n"
-"Les opcions estan en el format \"nom=valor nom2=valor2 ...\".\n"
-"Per exemple, \"io=0x300 irq=7\""
+msgid "The DNS Server IP"
+msgstr "IP del Servidor DNS"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+msgid "IP Range End:"
msgstr ""
-"Ara podeu subministrar les opcions per al mòdul %s.\n"
-"Tingueu en compte que qualsevol adreça s'ha de prefixar amb 0x, com '0x123'"
-#: ../../modules/interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "(module %s)"
-msgstr "(mòdul %s)"
+msgid "High"
+msgstr "Alt"
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "S'està instal·lant el controlador per a la targeta de %s %s"
+msgid "NoVideo"
+msgstr "NoVideo"
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "See hardware info"
-msgstr "Mira la informació del maquinari"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "this field describes the device"
+msgstr "aquest camp descriu el dispositiu"
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Teniu alguna interfície %s?"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr "S'està afegint la impressora a Star Office/OpenOffice.org/GIMP"
-#: ../../modules/interactive.pm:1
+#
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do you have another one?"
-msgstr "En teniu una altra?"
+msgid "Local Printers"
+msgstr "Impressores locals"
-# #msgid "Found %s %s interfaces"
-# #msgstr "S'han trobat interfícies %2$s %1$s"
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "S'han trobat interfícies %s %s"
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Installation image directory"
+msgstr "Xpmac (instal·lació del controlador de pantalla)"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "Ara podeu configurar cada paràmetre del mòdul."
+msgid "NIS Server"
+msgstr "Servidor NIS"
-#: ../../modules/parameters.pm:1
-#, c-format
-msgid "comma separated strings"
-msgstr "cadenes separades per coma"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Port: %s"
+msgstr "Port"
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "comma separated numbers"
-msgstr "nombres separats per coma"
+msgid "Spain"
+msgstr "Espanya"
-#: ../../modules/parameters.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "%d comma separated strings"
-msgstr "%d cadenes separades per coma"
+msgid "This user name has already been added"
+msgstr "Aquest nom d'usuari ja s'ha afegit"
-#: ../../modules/parameters.pm:1
+#
+#: ../../interactive.pm:1
#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d nombres separats per coma"
+msgid "Choose a file"
+msgstr "Trieu un fitxer"
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "a number"
-msgstr "un número"
+msgid "Apply"
+msgstr "Aplica"
-#: ../../network/adsl.pm:1
+#
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Auto-detect available ports"
+msgstr "Detectada automàticament"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
-msgstr ""
+msgid "Internet Connection Sharing currently disabled"
+msgstr "La connexió a Internet compartida està inhabilitada"
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"La manera més habitual de connectar amb ADSL és pppoe.\n"
-"Algunes connexions utilitzen pptp, unes poques utilitzen dhcp.\n"
-"Si no ho sabeu, escolliu 'utilitza pppoe'"
+msgid "San Marino"
+msgstr "San Marino"
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Connect to the Internet"
-msgstr "Connecta't a Internet"
+msgid "Belgium"
+msgstr "Bèlgica"
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Sagem (using pppoa) usb"
-msgstr ""
+msgid "Kuwait"
+msgstr "Kuwait"
-#: ../../network/adsl.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel Speedtouch USB"
+msgid "Choose the window manager to run:"
+msgstr "Escolliu el gestor de finestres per executar:"
-#: ../../network/adsl.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "use dhcp"
-msgstr "utilitza dhcp"
+msgid "sub generation of the cpu"
+msgstr ""
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "use pptp"
-msgstr "utilitza pptp"
+msgid "First Time Wizard"
+msgstr "Auxiliar per a la primera vegada"
-#: ../../network/adsl.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "use pppoe"
-msgstr "utilitza pppoe"
+msgid ""
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
+msgstr ""
+"S'ha produït un error, però no sé com gestionar-lo correctament.\n"
+"Si continueu, és sota la vostra responsabilitat."
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Other ports"
-msgstr "Altres ports"
+msgid "please wait, parsing file: %s"
+msgstr "espereu si us plau, s'està analitzant el fitxer: %s"
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Taiwan"
+msgstr "Tailàndia"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Everything (no firewall)"
-msgstr "Tot (sense tallafoc)"
+msgid "Pakistan"
+msgstr "Pakistan"
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
msgstr ""
-"El port introduït no és vàlid: %s.\n"
-"El format correcte és \"port/tcp\" o \"port/udp\", \n"
-"on el port es troba entre 1 i 65535."
+"Per poder imprimir amb la Lexmark inkjet i amb aquesta configuració, "
+"necessiteu els controladors de la impressora inkjet proporcionats per "
+"Lexmark (http://www.lexmark.com/). Dins de la web de Lexmark, feu clic al "
+"botó \"Controladors\" i trieu la secció d'impressores. Aleshores escolliu el "
+"vostre model i després \"Linux\" com a sistema operatiu. Els controladors "
+"vénen en paquets RPM o en seqüències per a l'intèrpret d'ordres amb una "
+"instal·lació gràfica interactiva. No necessiteu fer aquesta configuració amb "
+"la interfície gràfica. Cancel·leu directament després de l'acord de "
+"llicència. Llavors imprimiu pàgines d'alineació dels capçals d'impressió amb "
+"l'ordre \"lexmarkmaintain\" i ajusteu l'alineació dels capçals amb aquest "
+"programa."
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
-msgstr ""
-"Podeu introduir diferents ports.\n"
-"Són exemples vàlids: 139/tcp 139/udp.\n"
-"Cerqueu informació a /etc/services"
+msgid "Permissions"
+msgstr "Permisos"
-#: ../../network/drakfirewall.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr "A quins serveis voleu permetre la connexió des d'Internet?"
+msgid "Provider name (ex provider.net)"
+msgstr "Nom del proveïdor (p.ex. proveidor.net)"
-#: ../../network/drakfirewall.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-"Configuració del drakfirewall\n"
-"\n"
-"Assegureu-vos d'haver configurat l'accés a la xarxa local/Internet\n"
-"amb el drakconnect abans de continuar."
+msgid "Version: %s\n"
+msgstr "Versió: %s\n"
-#: ../../network/drakfirewall.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
-"Configuració del drakfirewall\n"
-"\n"
-"Aquí es configura un tallafocs personal per a aquest ordinador Linux "
-"Mandrake.\n"
-"Per a una potent solució de tallafocs dedicada, consulteu si us plau la \n"
-"distribució especialitzada MandrakeSecurity Firewall."
+"El vostre sistema està baix de recursos; podeu tenir algun problema en\n"
+"instal·lar el Mandrake Linux. Si això passa, podeu provar d'instal·lar-lo "
+"en\n"
+"mode text. Per fer-ho, premeu 'F1' en arrencar des del CD-ROM i escriviu "
+"'text'."
-#: ../../network/drakfirewall.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "No network card"
-msgstr "No s'ha trobat cap targeta de xarxa"
+msgid "Use the Windows partition for loopback"
+msgstr "Utilitza la particio Windows per al loopback"
-#
-#: ../../network/drakfirewall.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "POP and IMAP Server"
-msgstr "Servidor POP i IMAP"
+msgid "Armenian (typewriter)"
+msgstr "Armeni (màquina d'escriure)"
-#
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Mail Server"
-msgstr "Servidor de correu"
+msgid "Connection type: "
+msgstr "Tipus de connexió: "
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "Domain Name Server"
-msgstr "Servidor de Noms de Domini (DNS)"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Graphical interface"
+msgstr "Interfície gràfica a l'inici"
-#: ../../network/drakfirewall.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Web Server"
-msgstr "Servidor Web"
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "Xfree %s amb acceleració 3D de maquinari"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr ""
+msgid "India"
+msgstr "Índia"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Host name"
-msgstr "Nom de l'ordinador central"
-
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Zeroconf Host name"
-msgstr "Nom de l'ordinador central"
+msgid "Chad"
+msgstr "Txad"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
-msgstr ""
+msgid "Slovakia"
+msgstr "Eslovàquia"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configuring network"
-msgstr "S'està configurant la xarxa"
+msgid "Singapore"
+msgstr "Singapur"
-#: ../../network/ethernet.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
-msgstr ""
-"Si us plau, seleccioneu quin adaptador de xarxa voleu utilitzar per\n"
-"connectar-vos a Internet."
+msgid "Cambodia"
+msgstr "Cambodja"
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Choose the network interface"
-msgstr "Escolliu la interfície de xarxa"
+msgid "Monitor HorizSync: %s\n"
+msgstr "Sincronització horitzontal del monitor: %s\n"
-#: ../../network/ethernet.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"No s'ha detectat cap adaptador de xarxa ethernet al sistema.\n"
-"No puc configurar aquest tipus de connexió."
+msgid "Path"
+msgstr "Camí"
-#: ../../network/ethernet.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
msgstr ""
-"Quin client dhcp voleu utilitzar?\n"
-"El predeterminat és dhcp-client"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
+msgid ""
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
msgstr ""
-"No s'ha trobat cap targeta PCI XDSI. Si us plau, seleccioneu-ne una a la "
-"pantalla següent."
+"El sistema d'impressió (%s) no s'arrencarà automàticament quan l'ordinador "
+"s'iniciï.\n"
+"\n"
+"És possible que l'arrencada automàtica fos deshabilitada en canviar a un "
+"nivell de seguretat més alt, perquè el sistema d'impressió és un punt d'atac "
+"potencial.\n"
+"\n"
+"Voleu tornar a habilitar l'arrencada automàtica del sistema d'impressió?"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
+"Printer %s\n"
+"What do you want to modify on this printer?"
msgstr ""
-"S'ha detectat una targeta PCI XDSI, però no es reconeix el tipus. Si us "
-"plau, seleccioneu una targeta PCI a la pantalla següent."
+"Impressora %s\n"
+"Quines modificacions voleu fer en aquesta impressora?"
-#: ../../network/isdn.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Quina targeta XDSI teniu?"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "ISDN Configuration"
-msgstr "Configuració de l'XDSI"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Abort"
-msgstr "Abandona"
+msgid "Add host"
+msgstr "Afegeix un usuari"
-#: ../../network/isdn.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Continue"
-msgstr "Continua"
+msgid ""
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
+"\n"
+"The current driver for your \"%s\" sound card is \"%s\" "
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
+"\"Custom\" permit a per-user granularity.\n"
msgstr ""
+"Voleu permetre als usuaris compartir alguns dels seus directoris?\n"
+"Fer això permetrà al usuaris fer un simple clic a \"Comparteix\" en el "
+"konqueror i el nautilus.\n"
"\n"
-"Si teniu una targeta ISA, els valors de la pantalla següent haurien de ser "
-"correctes.\n"
-"\n"
-"Si teniu una targeta PCMCIA, cal que en sapigueu l'\"irq\" i l'\"io\".\n"
+"\"Personalitzat\" permet configurar cada usuari per separat.\n"
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "I don't know"
-msgstr "No ho sé"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
+msgstr ""
+"Si us plau, carregueu o deseu la selecció de paquets en el disquet.\n"
+"El format és el mateix que en els disquets generats d'instal·lació "
+"automàtica."
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "PCI"
-msgstr "PCI"
+msgid "China (broadcast)"
+msgstr "Xina (difusió)"
-#: ../../network/isdn.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "Use quota for backup files."
+msgstr "Usa la quota de disc per als fitxers de còpia de seguretat."
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "What kind of card do you have?"
-msgstr "Quin tipus de targeta teniu?"
+msgid "Configuring printer \"%s\"..."
+msgstr "S'està configurant la impressora \"%s\"..."
-#: ../../network/isdn.pm:1
+#
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr "S'ha trobat la interfície \"%s\". Voleu utilitzar-la?"
+msgid "Internet connection"
+msgstr "Connexió a Internet"
-#: ../../network/isdn.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Quin protocol voleu utilitzar?"
+msgid ""
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
+msgstr ""
+"Ha fallat la càrrega del mòdul %s.\n"
+"Voleu tornar-ho a intentar amb altres paràmetres?"
-#
-#: ../../network/isdn.pm:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Protocol per a la resta del món"
+msgid "Welcome to the Open Source world."
+msgstr "Benvingut al món del Codi Font Obert"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Bosnia and Herzegovina"
+msgstr "Bòsnia i Hercegovina"
#
-#: ../../network/isdn.pm:1
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
msgstr ""
-"Protocol per a la resta del món\n"
-"Cap canal D (línies punt a punt)"
+"Necessiteu un sistema de fitxers real (ext2/ext3, reiserfs, xfs o jfs) per a "
+"aquest punt de muntatge\n"
#
-#: ../../network/isdn.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "European protocol"
-msgstr "Protocol europeu"
+msgid "You must enter a host name or an IP address.\n"
+msgstr "Si us plau, introduïu el nom de l'ordinador o la IP."
+
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#, c-format
+msgid "Netherlands"
+msgstr "Països Baixos"
#
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "S'estan enviant els fitxers..."
+
#: ../../network/isdn.pm:1
#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Protocol europeu (EDSS1)"
+msgid "Internal ISDN card"
+msgstr "Targeta XDSI interna"
-#: ../../network/isdn.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
msgstr ""
-"Seleccioneu el vostre proveïdor.\n"
-"Si no és a la llista, seleccioneu \"No és a la llista\""
+"No hi ha cap controlador OSS/ALSA alternatiu conegut per a la vostra targeta "
+"de so (%s), que actualment fa servir \"%s\""
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "External ISDN modem"
-msgstr "Mòdem XDSI extern"
+#: ../../network/modem.pm:1
+#, fuzzy, c-format
+msgid "Title"
+msgstr "Taula"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Internal ISDN card"
-msgstr "Targeta XDSI interna"
+msgid "Install & convert Fonts"
+msgstr "Instal·la i converteix les Fonts"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "Quin tipus de connexió XDSI teniu?"
+msgid "WARNING"
+msgstr "AVÍS"
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Network Configuration Wizard"
-msgstr "Auxiliar de configuració de xarxa"
+msgid "Installing bootloader"
+msgstr "S'està instal·lant el carregador de l'arrencada"
-#
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "replay"
+msgstr "Repeteix"
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "Configuració antiga (isdn4net)"
+msgid "detected %s"
+msgstr "s'ha detectat %s"
-#
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "New configuration (isdn-light)"
-msgstr "Nova configuració (isdn-light)!"
+msgid "Virgin Islands (U.S.)"
+msgstr "Illes Verge Americanes"
-#: ../../network/isdn.pm:1
+#: ../../partition_table.pm:1
#, c-format
+msgid "Bad backup file"
+msgstr "Fitxer de còpia de seguretat incorrecte"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
"\n"
-"We recommand the light configuration.\n"
+"What would you like to do?"
msgstr ""
-"Quina configuració XDSI preferiu?\n"
-"\n"
-"* La configuració antiga usa isdn4net. Conté eines molt\n"
-" potents, però és difícil de configurar, i no és estàndard.\n"
-"\n"
-"* La nova configuració és més fàcil d'entendre, més\n"
-" estàndard, però té menys eines.\n"
+"La configuració de la connexió compartida a Internet ja s'ha dut a terme.\n"
+"Ara està inhabilitada.\n"
"\n"
-"Nosaltres recomanen la nova configuració senzilla (isdn-light).\n"
+"Què voleu fer?"
-#: ../../network/modem.pm:1
-#, fuzzy, c-format
-msgid "Do nothing"
-msgstr "però que no coincideixin amb"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Enter IP address and port of the host whose printers you want to use."
+msgstr ""
-#: ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Install rpm"
-msgstr "Instal·la"
+msgid "Pipe into command"
+msgstr "Redirecciona el treball cap a una ordre"
-#: ../../network/modem.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
msgstr ""
+"Part del maquinari del vostre ordinador necessita controladors\n"
+"\"registrats\" per poder funcionar. Podeu trobar-ne informació a: %s"
-#: ../../network/modem.pm:1
-#, fuzzy, c-format
-msgid "Title"
-msgstr "Taula"
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Detecting devices..."
+msgstr "S'estan detectant els dispositius..."
-#: ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Click here to launch the wizard ->"
+msgstr "Feu clic aquí per executar l'auxiliar ->"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Haiti"
+msgstr "Haití"
+
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
+"Description of the fields:\n"
+"\n"
msgstr ""
+"Descripció dels camps:\n"
+"\n"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the name of the CPU"
+msgstr "el nom del venedor del dispositiu"
+
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Segon servidor DNS (opcional)"
+msgid "Refreshing printer data..."
+msgstr "S'estan refrescant les dades de les impressores..."
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../install2.pm:1
#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Primer servidor DNS (opcional)"
+msgid "You must also format %s"
+msgstr "També heu de formatar %s"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Domain name"
-msgstr "Nom de domini"
+msgid "Be careful: this operation is dangerous."
+msgstr "Aneu amb compte: aquesta operació és perillosa."
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "CHAP"
-msgstr "CHAP"
+msgid "Insert a floppy containing package selection"
+msgstr "Inseriu un disquet amb la selecció de paquets"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Script-based"
-msgstr "Basat en script"
+msgid "Server: "
+msgstr "Servidor: "
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#
+#: ../../standalone/draksec:1
#, c-format
-msgid "Terminal-based"
-msgstr "Basat en terminal"
+msgid "Security Alerts:"
+msgstr "Alarmes de seguretat:"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid "Sweden"
+msgstr "Suècia"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Login ID"
-msgstr "ID d'entrada"
+msgid "Use Expect for SSH"
+msgstr "Usa Expect en l'SSH"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Phone number"
-msgstr "Número de telèfon"
+msgid "Poland"
+msgstr "Polònia"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Connection name"
-msgstr "Nom de la connexió"
+msgid "Importance: %s\n"
+msgstr "Importància: %s\n"
-#: ../../network/modem.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Dialup options"
-msgstr "Opcions de marcatge"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr "Marqueu aquesta opció si voleu expulsar la cinta en acabar."
-#: ../../network/modem.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr ""
-"Si us plau, seleccioneu el port sèrie al qual teniu connectat el mòdem."
+msgid "Other ports"
+msgstr "Altres ports"
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Network Configuration"
-msgstr "Configuració de xarxa"
+msgid "number of capture buffers for mmap'ed capture"
+msgstr "nombre de memòries intermèdies per a captures amb MMAP"
-#: ../../network/netconnect.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
+msgid "SMBus controllers"
msgstr ""
-"Hi ha hagut problemes durant la configuració.\n"
-"Proveu la connexió via net_monitor o mcc. Si la connexió no funciona "
-"correctament, torneu a executar la configuració."
-#: ../../network/netconnect.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Després d'això, és recomanable que reinicieu l'entorn X per\n"
-"evitar problemes deguts al canvi de nom de l'ordinador central."
+msgid "Connection timeout (in sec)"
+msgstr "Temps màxim per connectar (en seg)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
msgstr ""
-"Felicitats, la configuració de xarxa i Internet ha finalitzat.\n"
-"Ara s'aplicarà la configuració al sistema.\n"
-"\n"
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"S'ha produït un problema en reiniciar la xarxa: \n"
-"\n"
-"%s"
+msgid "Croatian"
+msgstr "Croata"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr "Cal instal·lar el paquet %s. Voleu instal·lar-lo?"
+msgid "Use existing partition"
+msgstr "Utilitza les particions existents"
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Network configuration"
-msgstr "Configuració de xarxa"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Unable to contact mirror %s"
+msgstr "No es pot bifurcar: %s"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Voleu iniciar la connexió en arrencar?"
+msgid "/Help/_About..."
+msgstr "/Ajuda/_Quant a.."
-#
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Internet connection"
-msgstr "Connexió a Internet"
+msgid "Remove user directories before restore."
+msgstr "Esborra els directoris d'usuari abans de restaurar."
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
msgstr ""
-"Heu configurat múltiples maneres de conectar-se a Internet.\n"
-"Escolliu la que voleu utilitzar.\n"
-"\n"
+"Esteu a punt de configurar una impressora remota. Això necessita una "
+"connexió de xarxa operativa, però la vostra xarxa encara no està "
+"configurada. Si continueu sense configurar la xarxa, no podreu utilitzar la "
+"impressora que esteu configurant ara. Què voleu fer?"
#
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Escolliu la connexió que voleu configurar"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "CUPS printer configuration"
+msgstr "Configuració de la \"winprinter\" OKI"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "ethernet card(s) detected"
-msgstr "s'han detectat una o diverses targetes Ethernet"
+msgid "could not find any font in your mounted partitions"
+msgstr "no s'ha pogut trobar cap font en les particions muntades"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "LAN connection"
-msgstr "Connexió LAN"
+msgid "F00f bug"
+msgstr ""
-#
-#: ../../network/netconnect.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "cable connection detected"
-msgstr "s'ha detectat la connexió per cable"
+msgid "XFree %s"
+msgstr "XFree %s"
-#: ../../network/netconnect.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Cable connection"
-msgstr "Connexió per cable"
+msgid ""
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
+msgstr ""
+"Quin client dhcp voleu utilitzar?\n"
+"El predeterminat és dhcp-client"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "detected"
-msgstr "s'ha detectat %s"
+msgid "Domain Name:"
+msgstr "Nom de domini"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "On Floppy"
+msgstr "Disquet d'arrencada"
#
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "ADSL connection"
-msgstr "Connexió ADSL"
+msgid "Restore"
+msgstr "Restaura"
-#: ../../network/netconnect.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "detected %s"
-msgstr "s'ha detectat %s"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "ISDN connection"
-msgstr "Connexió XDSI"
-
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Winmodem connection"
-msgstr "Connexió normal per mòdem"
+msgid "Looking for available packages..."
+msgstr "S'estan cercant els paquets disponibles..."
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "detected on port %s"
-msgstr "detectat al port %s"
+msgid "Init Message"
+msgstr "Missatge d'inicialització"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Normal modem connection"
-msgstr "Connexió normal per mòdem"
+msgid "Rescue partition table"
+msgstr "Recupera la taula de particions"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connection complete."
+msgstr "Velocitat de la connexió"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Detecting devices..."
-msgstr "S'estan detectant els dispositius..."
+msgid "Cyprus"
+msgstr "Xipre"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Expert Mode"
-msgstr "Mode expert"
+msgid "Remove from RAID"
+msgstr "Elimina del RAID"
-#: ../../network/netconnect.pm:1
+# c-format
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Use auto detection"
-msgstr "Utilitza la detecció automàtica"
+msgid "This encryption key is too simple (must be at least %d characters long)"
+msgstr ""
+"Aquesta clau de xifratge és massa senzilla (ha de tenir com a mínim %d "
+"caràcters)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Choose the profile to configure"
-msgstr "Escolliu el perfil a configurar"
+msgid "Configuration Wizards"
+msgstr "Auxiliars de configuració"
#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Benvingut a l'auxiliar de configuració de xarxa\n"
-"\n"
-"Ara es configurarà la connexió a Internet/xarxa.\n"
-"Si no voleu utilitzar la detecció automàtica, desactiveu el quadre de "
-"verificació.\n"
+msgid "ISDN connection"
+msgstr "Connexió XDSI"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Atès que esteu realitzant una instal·lació des de xarxa, ja teniu la xarxa "
-"configurada.\n"
-"Feu clic a 'D'acord' per conservar la configuració, o a 'Cancel·la' per "
-"tornar a configurar la connexió a Internet i a la xarxa local.\n"
+msgid "primary"
+msgstr "primari"
-#: ../../network/netconnect.pm:1
+#: ../../printer/main.pm:1
#, c-format
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr " en servidor SMB/Windows \"%s\", recurs compartit \"%s\""
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
"\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
msgstr ""
+"Ara podeu triar quins serveis voleu que s'iniciïn durant l'arrencada.\n"
"\n"
+"Aquí es llisten tots els serveis disponibles amb la instal·lació actual.\n"
+"Reviseu-los amb cura i desmarqueu aquells que no seran necessaris sempre\n"
+"durant l'arrencada.\n"
"\n"
+"Podeu obtenir una explicació breu sobre un servei si el seleccioneu. Si no\n"
+"esteu segur de la utilitat d'un servei, el més segur és deixar el "
+"comportament\n"
+"per defecte.\n"
"\n"
-"Ara es configurarà la connexió %s.\n"
-"\n"
-"\n"
-"Premeu D'acord per continuar."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Ara es configurarà la connexió %s."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Internet connection & configuration"
-msgstr "Connexió i configuració d'Internet"
-
-#
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Configure the connection"
-msgstr "Configura la connexió"
+"Aneu especialment amb cura en aquest pas si penseu utilitzar l'ordinador "
+"com\n"
+"a servidor: segurament no us interessarà iniciar serveis que no necessiteu.\n"
+"Recordeu que hi ha diversos serveis que poden ser perillosos si s'habiliten\n"
+"en un servidor. En general, seleccioneu només els serveis que realment "
+"necessiteu."
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disconnect"
-msgstr "Desconnecta"
+msgid "Skip"
+msgstr "Omet"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connect"
-msgstr "Connecta"
+msgid "Niue"
+msgstr "Niue"
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"You can reconfigure your connection."
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
msgstr ""
-"\n"
-"Podeu tornar a configurar la connexió."
+"Activa/Desactiva totes les interfícies de xarxa configurades per\n"
+"iniciar-se durant l'arrencada."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
msgstr ""
-"\n"
-"Podeu connectar-vos a Internet o tornar a configurar la connexió."
-#: ../../network/netconnect.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "Ara mateix no esteu connectat a Internet."
+msgid "important"
+msgstr "important"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
+msgid "Total Progress"
+msgstr "Progrés total"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
+"\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
+"\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
"\n"
-"You can disconnect or reconfigure your connection."
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
msgstr ""
+"El DrakX detectarà qualsevol dispositiu IDE en l'ordinador. Així mateix, \n"
+"intentarà trobar un o més adaptadors SCSI PCI. Si troba un adaptador SCSI,\n"
+"el DrakX instal·larà automàticament el controlador adequat.\n"
"\n"
-"Podeu desconnectar-vos o tornar a configurar la connexió."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "You are currently connected to the Internet."
-msgstr "Ara mateix esteu connectat a Internet."
+"Com que la detecció de maquinari no sempre troba tots els dispositius,\n"
+"el DrakX us demanarà que confirmeu si hi ha un adaptador SCSI PCI. Feu clic\n"
+"a \"Sí\" si sabeu segur que n'hi ha un instal·lat en l'ordinador. "
+"Apareixerà\n"
+"una llista de targetes SCSI perquè n'escolliu una. Feu clic a \"No\" si no "
+"en\n"
+"teniu cap. Si no n'esteu segurs, podeu mirar la llista de maquinari\n"
+"detectat en el vostre ordinador seleccionant \"Veure informació del "
+"maquinari\"\n"
+"i fent clic a \"D'acord\". Examineu la llista de maquinari i feu clic sobre\n"
+"el botó \"D'acord\" per tornar a la pregunta sobre l'interfície SCSI.\n"
+"\n"
+"Si heu de seleccionar l'adaptador manualment, el DrakX us preguntarà si\n"
+"voleu confifurar-ne les opcions. Convé que deixeu que el DrakX comprovi\n"
+"el maquinari per inicialitzar les opcions especifiques d'algunes targetes.\n"
+"Això sol funcionar bé.\n"
+"\n"
+"Si el DrakX no pot comprovar les opcions que se li han de passar al "
+"controlador,\n"
+"us caldrà proporcionar les opcions al controlador manualment. Consulteu la\n"
+"Guia de l'usuari (capítol 3, en la secció \"Informació obtinguda del "
+"maquinari\")\n"
+"per saber com treure aquesta informació de la documentació del maquinari,\n"
+"del lloc web del fabricant (si teniu accés a Internet) o del Microsoft "
+"Windows\n"
+"(si el teniu al sistema)."
#
-#: ../../network/network.pm:1
-#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "L'URL ha de començar amb 'ftp:' o 'http:'"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Proxy should be http://..."
-msgstr "El servidor intermediari ha de ser http://..."
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "FTP proxy"
-msgstr "Intermediari per a FTP"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "HTTP proxy"
-msgstr "Intermediari per a HTTP"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Proxies configuration"
-msgstr "Configuració dels servidors intermediaris (proxies)"
-
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "L'adreça de la passarel·la ha d'estar en format 1.2.3.4"
+msgid "Users"
+msgstr "Usuaris"
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "L'adreça del servidor DNS ha d'estar en format 1.2.3.4"
+msgid "Aruba"
+msgstr "Aruba"
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Gateway device"
-msgstr "Dispositiu de la passarel·la"
+msgid "Preparing bootloader..."
+msgstr "S'està preparant el carregador de l'arrencada..."
#: ../../network/network.pm:1
#, c-format
msgid "Gateway (e.g. %s)"
msgstr "Passarel·la (e.g. %s)"
-#: ../../network/network.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "DNS server"
-msgstr "Servidor DNS"
+msgid "The passwords do not match"
+msgstr "Les contrasenyes no coincideixen"
-#: ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
+msgid "Examples for correct IPs:\n"
msgstr ""
-"Si us plau, introduïu el nom del vostre ordinador central.\n"
-"Aquest nom ha de ser complet, com ara \"mybox.mylab.myco.com\".\n"
-"També podeu introduir l'adreça IP de la passarel·la, si en teniu una."
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
+msgid "Frequency (MHz)"
msgstr ""
-#: ../../network/network.pm:1
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
msgstr ""
+"Per utilitzar aquesta selecció de paquets que heu desat, arrenqueu la "
+"instal·lació amb \"linux defcfg=floppy\""
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "L'adreça IP ha d'estar en format 1.2.3.4"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the number of the processor"
+msgstr "el color de la barra de progrés"
#
-#: ../../network/network.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Start at boot"
-msgstr "Inicia en l'arrencada"
+msgid "Hardware clock set to GMT"
+msgstr "El rellotge del vostre ordinador està regulat per GMT"
#
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Si us plau, introduïu el nom de l'ordinador o la IP."
-
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Network Hotplugging"
-msgstr "Configuració de xarxa"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Give a file name"
+msgstr "Proporcioneu un nom de fitxer"
-#: ../../network/network.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Track network card id (useful for laptops)"
+msgid "Please choose the port that your printer is connected to."
msgstr ""
-"Fes el seguiment de l'identificador de la targeta de xarxa (d'utilitat per a "
-"portàtils)"
-
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "DHCP host name"
-msgstr "Nom de l'ordinador central"
+"Si us plau, seleccioneu el port al qual teniu connectada la impressora."
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "Netmask"
-msgstr "Submàscara de xarxa"
+msgid "Change Cd-Rom"
+msgstr "Canvieu el CD-ROM"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "IP address"
-msgstr "Adreça IP"
+msgid "Paraguay"
+msgstr "Paraguai"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp)"
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
+msgstr ""
+"Usa les còpies de seguretat incrementals (no reemplacis les còpies antigues)"
-#: ../../network/network.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Automatic IP"
-msgstr "IP automàtica"
+msgid "There's no known driver for your sound card (%s)"
+msgstr "No hi ha cap controlador conegut per a la vostra targeta de so (%s)"
-#: ../../network/network.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid " (driver %s)"
-msgstr " (controlador %s)"
+msgid "force"
+msgstr "imposa"
-#: ../../network/network.pm:1
+#
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configuring network device %s"
-msgstr "S'està configurant el dispositiu de xarxa %s"
+msgid "Exit"
+msgstr "Surt"
-#: ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
msgstr ""
-"Si us plau, introduïu la configuració IP d'aquest ordinador.\n"
-"S'ha d'introduir cada element com una adreça IP en notació decimal amb\n"
-"punts (per exemple, 1.2.3.4)."
+"NOTA: Segons el model de la impressora i el sistema d'impressió, "
+"s'instal·laran fins a %d MB de programari addicional."
-#: ../../network/network.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
msgstr ""
-"ATENCIÓ: Aquest dispositiu ja es va configurar per connectar-se a Internet.\n"
-"Només cal que accepteu per mantenir-lo configurat.\n"
-"Si modifiqueu els camps inferiors, sobreescriureu aquesta configuració."
+"No teniu cap interfície configurada.\n"
+"Configureu-la primer fent clic a 'Configura'"
-#: ../../network/shorewall.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Estonian"
+msgstr "Estonià"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""
-"Atenció! S'ha detectat una configuració existent del tallafoc. Potser us "
-"caldrà fer algun ajustament manual després de la instal·lació."
+"L'Apache és un servidor de World Wide Web. S'utilitza per servir fitxers\n"
+"HTML i CGI."
-#: ../../network/shorewall.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "S'ha detectat la configuració del tallafoc!"
+msgid "Add/Del Clients"
+msgstr "Afegeix/Suprimeix clients"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Account Password"
-msgstr "Contrasenya del compte"
+msgid "Choose the network interface"
+msgstr "Escolliu la interfície de xarxa"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Account Login (user name)"
-msgstr "Entrada del compte (nom d'usuari)"
+msgid "Unknown Model"
+msgstr "Model desconegut"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Temps màxim per connectar (en seg)"
+msgid "CD/DVD burners"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid ""
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"Partició arrencada per defecte\n"
+" (per a l'arrencada de l'MS-DOS, no per a LILO)\n"
#
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "choose image"
+msgstr "trieu un fitxer d'imatge"
+
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Connection speed"
-msgstr "Velocitat de la connexió"
+msgid "Firewalling configuration detected!"
+msgstr "S'ha detectat la configuració del tallafoc!"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Dialing mode"
-msgstr "Mode de marcatge"
+msgid "Connection name"
+msgstr "Nom de la connexió"
-#
-#: ../../network/tools.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Choose your country"
-msgstr "Escolliu el vostre país"
+msgid ""
+"x coordinate of text box\n"
+"in number of characters"
+msgstr ""
+"coordenada x de la caixa de text\n"
+"en nombre de caràcters"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 2 del proveïdor (opcional)"
+msgid "Updating package selection"
+msgstr "S'està actualitzant la selecció de paquets"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "On voleu muntar el fitxer de loopback %s?"
+
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 1 del proveïdor (opcional)"
+msgid ""
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
+msgstr ""
+"El disquet s'ha creat correctament.\n"
+"Ara podeu repetir la vostra instal·lació."
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the number of buttons the mouse has"
+msgstr "el color de la barra de progrés"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Provider phone number"
-msgstr "Número de telèfon del proveïdor"
+msgid ""
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
+msgstr ""
+"Si us plau, entreu el directori (o mòdul) d'aquest\n"
+"ordinador central on voleu desar la còpia de seguretat."
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Nom del proveïdor (p.ex. proveidor.net)"
+msgid "Replay"
+msgstr "Repeteix"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Your personal phone number"
-msgstr "El vostre telèfon particular"
+msgid "Backup other files"
+msgstr "Còpia de seguretat d'altres fitxers"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Card IO_1"
-msgstr "E/S_1 de la Targeta"
+msgid "No floppy drive available"
+msgstr "No hi ha cap unitat de disquet disponible"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Card IO_0"
-msgstr "E/S_0 de la Targeta"
+msgid "Backup files are corrupted"
+msgstr "Els fitxers de la còpia de seguretat estan corromputs"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Card IO"
-msgstr "E/S de la Targeta"
+msgid "TV norm:"
+msgstr "Normativa de TV:"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Card mem (DMA)"
-msgstr "Targeta de memòria (DMA)"
+msgid "Cpuid family"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Card IRQ"
-msgstr "IRQ de la targeta"
+msgid "32 MB"
+msgstr "32 MB"
-#: ../../network/tools.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please fill or check the field below"
-msgstr "Si us plau, ompliu o marqueu el camp inferior"
+msgid "Lithuanian AZERTY (new)"
+msgstr "Lituà AZERTY (nou)"
-#: ../../network/tools.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Connection Configuration"
-msgstr "Configuració de la connexió"
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgstr ""
-#: ../../network/tools.pm:1
+#: ../../fsedit.pm:1
#, fuzzy, c-format
msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
msgstr ""
-"No sembla que el sistema estigui connectat a Internet.\n"
-"Intenteu tornar a configurar la connexió."
+"Heu seleccionat una partició de programari RAID com a arrel (/).\n"
+"Això no ho pot gestionar cap carregador d'arrencada sense una partició /"
+"boot.\n"
+"Per tant, assegureu-vos d'afegir una partició /boot"
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Per raons de seguretat, ara es desconnectarà."
+#
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Previous"
+msgstr "Anterior"
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Ara, el sistema està connectat a Internet."
+#: ../../any.pm:1
+#, c-format
+msgid "Other OS (MacOS...)"
+msgstr "Un altre SO (MacOS...)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Testing your connection..."
-msgstr "S'està comprovant la vostra connexió..."
+msgid "To activate the mouse,"
+msgstr "Per activar el ratolí,"
-#: ../../network/tools.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Voleu intentar connectar-vos a Internet ara?"
+msgid "Bringing up the network"
+msgstr "S'està activant la xarxa"
-#: ../../network/tools.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Internet configuration"
-msgstr "Configuració d'Internet"
+msgid "Screenshots will be available after install in %s"
+msgstr "Les captures estaran disponibles després d'instal·lar a %s"
-#: ../../partition_table/raw.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
msgstr ""
-"Alguna cosa no va bé en la vostra unitat. \n"
-"Ha fallat una comprovació de la integritat de les dades. \n"
-"Això vol dir que qualsevol cosa que s'escrigui al disc acabarà feta malbé."
+"S'ha detectat més d'una partició de Microsoft Windows en la unitat de disc.\n"
+"Si us plau, trieu quina d'elles voleu redimensionar per instal·lar el nou\n"
+"sistema operatiu Mandrake Linux.\n"
+"\n"
+"Cada partició està identificada d'aquesta manera:\n"
+"\"Nom Linux\", \"Nom Windows\" \"Capacitat\".\n"
+"\n"
+"\"Nom Linux\" es compon de: \"tipus d'unitat de disc\", \"número d'unitat "
+"de \n"
+"disc\", \"número de la partició\" (per exemple, \"hda1\").\n"
+"\n"
+"\"Tipus d'unitat de disc\" és \"hd\" si la vostre unitat de disc és IDE i \n"
+"\"sd\" si és SCSI.\n"
+"\n"
+"\"Número de la unitat de disc\" és sempre una lletra després de \"hd\" o \"sd"
+"\".\n"
+"Amb unitats de disc IDE:\n"
+"\n"
+" * \"a\" significa \"unitat de disc mestra en el controlador IDE primari\",\n"
+"\n"
+" * \"b\" significa \"unitat de disc esclava en el controlador IDE primari"
+"\",\n"
+"\n"
+" * \"c\" significa \"unitat de disc mestra en el controlador IDE secundari"
+"\",\n"
+"\n"
+" * \"d\" significa \"unitat de disc esclava en el controlador IDE secundari"
+"\".\n"
+"\n"
+"Amb les unitats de disc SCSI, una \"a\" significa \"unitat primària de disc"
+"\",\n"
+"una \"b\" significa \"unitat secundària de disc\", etc.\n"
+"\n"
+"\"Nom Windows\" és la lletra de la vostra unitat de disc sota Windows (el "
+"primer\n"
+"disc o partició s'anomena \"C:\")."
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid " (Default)"
-msgstr " (Predeterminat)"
+msgid "Tanzania"
+msgstr ""
-#: ../../printer/cups.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "en servidor CUPS \"%s\""
+msgid "Computing FAT filesystem bounds"
+msgstr "S'estan calculant els límits del sistema de fitxers de la FAT"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"Backup Sources: \n"
+msgstr ""
+"\n"
+"Fonts de la còpia: \n"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Content of the file"
+msgstr "Contingut del fitxer"
#
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Remote Printers"
-msgstr "Impressores remotes"
+msgid "Authentication LDAP"
+msgstr "Autenticació LDAP"
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "CUPS"
-msgstr "CUPS"
+msgid "Let me pick any driver"
+msgstr ""
-#: ../../printer/cups.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Profile "
+msgstr "Perfil: "
+
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "(on this machine)"
-msgstr "(en aquest ordinador)"
+msgid "transmitted"
+msgstr ""
-#: ../../printer/cups.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Palestine"
+msgstr "Selecció del camí"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "(on %s)"
-msgstr "(en %s)"
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
-#: ../../printer/data.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
+msgid "%d comma separated strings"
+msgstr "%d cadenes separades per coma"
-#: ../../printer/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "LPRng"
-msgstr "LPRng"
+msgid "Here is the full list of keyboards available"
+msgstr "Aquesta és la llista completa de teclats disponibles"
-#: ../../printer/data.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
+msgid "Theme name"
+msgstr "Nom del tema"
-#: ../../printer/data.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "LPD"
-msgstr "LPD"
+msgid "/_Help"
+msgstr "/_Ajuda"
-#: ../../printer/data.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
+msgid ""
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
-#: ../../printer/data.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "PDQ"
-msgstr "PDQ"
+msgid "the width of the progress bar"
+msgstr "l'amplada de la barra de progrés"
-#: ../../printer/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
+msgid "Cook Islands"
+msgstr "Illes Cook"
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Unknown Model"
-msgstr "Model desconegut"
+msgid "Formatting partition %s"
+msgstr "S'està formatant la partició %s"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unknown model"
-msgstr "Model desconegut"
+msgid "Hostname required"
+msgstr "El nom de l'ordinador central (host) és necessari"
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "%s (Port %s)"
-msgstr "Port"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Unselect fonts installed"
+msgstr "Desselecciona les fonts instal·lades"
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Host %s"
-msgstr "Nom de l'ordinador central"
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Cancel"
+msgstr "Cancel·la"
-#
-#: ../../printer/main.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Network %s"
-msgstr "Xarxa"
+msgid "Searching for configured scanners ..."
+msgstr "Impressores disponibles"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Interface \"%s\""
-msgstr "Interfície %s"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Wheel"
+msgstr "Rodeta"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "Local network(s)"
-msgstr "Adreça de la xarxa local"
+msgid "Videocard"
+msgstr "Mode de vídeo"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Raw printer (No driver)"
-msgstr "Impressora en cru (raw) (Cap controlador)"
+msgid "\tBackups use tar and bzip2\n"
+msgstr "\tLes còpies de seguretat utilitzen tar i bzip2\n"
-#: ../../printer/main.pm:1
+#
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid ", using command %s"
-msgstr ", utilitzant l'ordre %s"
+msgid "Remove Selected"
+msgstr "Elimina la selecció"
-#: ../../printer/main.pm:1
-#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr " en servidor Novell \"%s\", impressora \"%s\""
+#
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _modems"
+msgstr "Detectada automàticament"
-#: ../../printer/main.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr " en servidor SMB/Windows \"%s\", recurs compartit \"%s\""
+msgid "Remove printer"
+msgstr "Suprimeix la impressora"
-#: ../../printer/main.pm:1
+#
+#: ../../install_interactive.pm:1
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", host TCP/IP \"%s\", port %s"
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
+msgstr ""
+"ATENCIÓ!\n"
+"\n"
+"Tot seguit, el DrakX canviarà la mida de la vostra partició de Windows. Aneu "
+"amb\n"
+"compte: aquesta operació és perillosa. Si encara no ho heu fet, sortiu de "
+"la\n"
+"instal·lació, executeu l'Scandisk sota Windows (i potser també el defrag) i\n"
+"torneu a començar la instal·lació. Feu també una còpia de seguretat de les\n"
+"vostres dades.\n"
+"Quan estigueu segur, premeu \"D'acord\"."
-#: ../../printer/main.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr " en servidor LPD \"%s\", impressora \"%s\""
+msgid "Which services would you like to allow the Internet to connect to?"
+msgstr "A quins serveis voleu permetre la connexió des d'Internet?"
-#: ../../printer/main.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ", printing to %s"
-msgstr ", imprimint a %s"
+msgid ""
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
+msgstr ""
+"Benvingut a la utilitat de configuració del correu.\n"
+"\n"
+"Aquí podreu configurar el sistema d'alerta.\n"
-#: ../../printer/main.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid ", multi-function device"
-msgstr ", dispositiu multifunció"
+msgid "Other"
+msgstr "Altres"
-#: ../../printer/main.pm:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", dispositiu multifunció en HP JetDirect"
+msgid "Default"
+msgstr "Predeterminat"
-#: ../../printer/main.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ", multi-function device on USB"
-msgstr ", dispositiu multifunció en USB"
-
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid ", multi-function device on parallel port \\#%s"
-msgstr ", dispositiu multifunció en port paral·lel \\/*%s"
-
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid ", USB printer"
-msgstr ", impressora USB \\/*%s"
-
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ", USB printer \\#%s"
-msgstr ", impressora USB \\/*%s"
+msgid "Button 2 Emulation"
+msgstr "Emulació del botó 2"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid " on parallel port \\#%s"
-msgstr " en port paral·lel \\/*%s"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "type1inst building"
+msgstr "construcció de type1inst"
#
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Local Printers"
-msgstr "Impressores locals"
+msgid "Abiword"
+msgstr "Abiword"
-#: ../../printer/main.pm:1
+#
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Pipe job into a command"
-msgstr "Redirecciona el treball cap a una ordre"
+msgid "choose image file"
+msgstr "trieu un fitxer d'imatge"
-#
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Enter a printer device URI"
-msgstr "Entreu un dispositiu URI d'impressora"
+msgid "X server"
+msgstr "Servidor X"
-#
-#: ../../printer/main.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer on NetWare server"
-msgstr "Impressora en servidor NetWare"
+msgid "Domain Admin User Name"
+msgstr "Nom d'usuari de l'administrador del domini"
#
-#: ../../printer/main.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Impressora en servidor SMB/Windows 95/98/NT"
+msgid "There was an error while scanning for TV channels"
+msgstr "S'ha produït un error en cercar els canals de TV"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Impressora de xarxa (TCP/Socket)"
+msgid "US keyboard (international)"
+msgstr "Teclat Estats Units (internacional)"
#
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Printer on remote lpd server"
-msgstr "Impressora en servidor lpd remot"
+msgid "Not installed"
+msgstr "No instal·lat"
-#
-#: ../../printer/main.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Impressora en servidor CUPS remot"
+msgid "LAN connection"
+msgstr "Connexió LAN"
-#: ../../printer/main.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Remote printer"
-msgstr "Impressora remota"
+msgid "/File/-"
+msgstr "/Fitxer/-"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Local printer"
-msgstr "Impressora local"
+msgid "Italian"
+msgstr "Italià"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
-msgid "Configuring applications..."
-msgstr "S'estan configurant les aplicacions..."
+msgid "Basic"
+msgstr "Bàsic"
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
-#, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
+msgstr ""
+" actualitzacions 2002 MandrakeSoft per Stew Benedict <sbenedict"
+"\\@mandrakesoft.com>"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "S'està suprimint la impressora \"%s\"..."
+msgid "Honduras"
+msgstr "Hondures"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Voleu realment suprimir la impressora \"%s\"?"
+msgid "pdq"
+msgstr ""
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Remove printer"
-msgstr "Suprimeix la impressora"
+msgid "Card IO"
+msgstr "E/S de la Targeta"
-#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Learn how to use this printer"
-msgstr "Apreneu a utilitzar aquesta impressora"
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "when checked, owner and group won't be changed"
+msgstr "si ho marqueu, no es canviaran ni el propietari ni el grup"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Print test pages"
-msgstr "Imprimeix la(es) pàgina(es) de prova"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
+msgstr ""
+"\n"
+"Aquesta partició especial\n"
+"Bootstrap és per arrencar\n"
+"el vostre sistema en dual.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
msgstr ""
-"És impossible de suprimir la impressora \"%s\" d'Star Office/OpenOffice.org/"
-"GIMP."
+"Si us plau, escolliu per cada pas si es repetirà la vostra instal·lació o si "
+"serà manual"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
msgstr ""
-"La impressora \"%s\" ha estat suprimida d'Star Office/OpenOffice.org/GIMP "
-"amb èxit."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr "S'està suprimint la impressora d'Star Office/OpenOffice.org/GIMP"
+msgid "\t-Network by FTP.\n"
+msgstr "\t-Xarxa per FTP.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Suprimeix aquesta impressora de Star Office/OpenOffice.org/GIMP"
+msgid "Russian (Yawerty)"
+msgstr "Rus (Yawerty)"
+#
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-"És impossible d'afegir la impressora \"%s\" a Star Office/OpenOffice.org/"
-"GIMP."
+msgid "You must enter a device or file name!"
+msgstr "Heu d'entrar un nom de dispositiu o de fitxer!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "/_Quit"
+msgstr "/_Surt"
+
+#: ../../network/adsl.pm:1
#, c-format
msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
msgstr ""
-"S'ha afegit correctament la impressora \"%s\" a Star Office/OpenOffice.org/"
-"GIMP."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr "S'està afegint la impressora a Star Office/OpenOffice.org/GIMP"
+msgid "Graphics memory: %s kB\n"
+msgstr "Memòria gràfica: %s kB\n"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Afegeix aquesta impressora a Star Office/OpenOffice.org/GIMP"
+#: ../../standalone.pm:1
+#, fuzzy, c-format
+msgid ""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+msgstr ""
+" Aquest programa és programari lliure; el podeu redistribuir i/o modificar\n"
+" sota els termes de la 'GNU General Public License' publicada per\n"
+" la Free Software Foundation; tant la versió 2 com (si voleu)\n"
+" qualsevol versió posterior.\n"
+"\n"
+" Aquest programa és distribueix amb l'esperança que serà útil,\n"
+" però SENSE CAP GARANTIA; sense ni tant sols la garantia implícita de\n"
+" MERCANTIBILITAT o CAPACITAT DE REALITZAR UN DETERMINAT PROPÒSIT. Mireu la\n"
+" 'GNU General Public License' per a més detalls.\n"
+"\n"
+" Hauríeu d'haver rebut una còpia de la 'GNU General Public License'\n"
+" amb el programa; si no és així, escriviu a la Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "La impressora \"%s\" és ara la impressora per defecte."
+msgid "access to compilation tools"
+msgstr "accés a les eines de compilació"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Default printer"
-msgstr "Impressora predeterminada"
+msgid "Please select data to restore..."
+msgstr "Si us plau, seleccioneu les dades per restaurar..."
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Set this printer as the default"
-msgstr "Fes que aquesta sigui la impressora predeterminada"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
+msgstr ""
+"Si penseu utilitzar aboot, assegureu-vos de deixar espai lliure (amb 2048\n"
+"sectors n'hi ha prou) al començament del disc"
+#
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer options"
-msgstr "Opcions de la impressora"
+msgid "Standard test page"
+msgstr "Pàgina de prova estàndard"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printer manufacturer, model"
-msgstr "Fabricant de la impressora, model"
+msgid "Create"
+msgstr "Crea"
-#: ../../printer/printerdrake.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "Fabricant de la impressora, model, controlador"
+msgid "What"
+msgstr "Què"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "S'està suprimint la impressora antiga \"%s\"..."
+msgid "There was an error ordering packages:"
+msgstr "S'ha produït un error en ordenar els paquets:"
#
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Printer name, description, location"
-msgstr "Nom de la impressora, descripció, ubicació"
+msgid "Bulgarian (BDS)"
+msgstr "Búlgar (BDS)"
#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Printer connection type"
-msgstr "Tipus de connexió de la impressora"
+msgid "Disable Server"
+msgstr "Inhabilita el servidor"
#
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Raw printer"
-msgstr "Impressora en cru (raw)"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Do it!"
-msgstr "Fes-ho!"
+msgid "Filesystem encryption key"
+msgstr "Clau de xifratge del sistema de fitxers: "
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Close"
-msgstr "Tanca"
+msgid "Gujarati"
+msgstr "Gujarati"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
msgstr ""
-"Impressora %s\n"
-"Quines modificacions voleu fer en aquesta impressora?"
+"Si us plau, escolliu el primer número del rang 10 que voleu editar,\n"
+"o premeu Retorn per continuar.\n"
+"Què trieu? "
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Modify printer configuration"
-msgstr "Modifica la configuració de la impressora"
+msgid "Save theme"
+msgstr "Desa el tema"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Add a new printer"
-msgstr "Afegiu una impressora"
+msgid "group"
+msgstr "grup"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+#: ../../lang.pm:1
#, c-format
-msgid "Normal Mode"
-msgstr "Mode normal"
+msgid "Brazil"
+msgstr "Brasil"
#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Change the printing system"
-msgstr "Modifica el sistema d'impressió"
+msgid "Auto Install"
+msgstr "Instal·la automàticament"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "CUPS configuration"
-msgstr "Configuració de CUPS"
+msgid "Network Configuration Wizard"
+msgstr "Auxiliar de configuració de xarxa"
-#: ../../printer/printerdrake.pm:1
+#
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Refresca la llista d'impressores (per veure totes les impressores CUPS "
-"remotes disponibles)"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Display all available remote CUPS printers"
-msgstr ""
-"Refresca la llista d'impressores (per veure totes les impressores CUPS "
-"remotes disponibles)"
+msgid "Removable media automounting"
+msgstr "Muntatge automàtic dels dispositius extraïbles"
#
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Les impressores següents estan configurades. Feu doble clic en una "
-"impressora per modificar-ne els paràmetres, per fer-la la impressora per "
-"defecte o per veure la informació de la impressora."
+msgid "Printing"
+msgstr "Impressió"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Printing system: "
-msgstr "Sistema d'impressió: "
+msgid "Unkown driver"
+msgstr "Controlador desconegut"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Checking installed software..."
-msgstr "S'està comprovant el programari instal·lat..."
+msgid ""
+"There are no printers found which are directly connected to your machine"
+msgstr "No s'ha trobat cap impressora connectada directament a l'ordinador"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Installing Foomatic..."
-msgstr "S'està instal·lant el Foomatic..."
+msgid "Create a new partition"
+msgstr "Crea una nova partició"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Driver:"
+msgstr "Controlador:"
+
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "S'està configurant la impressora \"%s\"..."
+msgid "unknown"
+msgstr "Model desconegut"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "S'està configurant la impressora \"%s\"..."
+msgid "Use fdisk"
+msgstr "Utilitza l'fdisk"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Reading printer data..."
-msgstr "S'estan llegint dades de la impressora..."
+msgid "MOVE YOUR WHEEL!"
+msgstr "MOVEU LA RODA!"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Quin sistema d'impressió (cua) voleu utilitzar?"
+msgid "sent: "
+msgstr ""
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Select Printer Spooler"
-msgstr "Seleccioneu la cua d'impressió"
-
-#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Setting Default Printer..."
-msgstr "Impressora predeterminada"
-
-#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing %s ..."
-msgstr "S'estan instal·lant els paquets..."
+msgid "Automatic IP"
+msgstr "IP automàtica"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Removing %s ..."
-msgstr "S'està esborrant %s"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
+"The \"%s\" button shows two more buttons to:\n"
"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"El sistema d'impressió (%s) no s'arrencarà automàticament quan l'ordinador "
-"s'iniciï.\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
"\n"
-"És possible que l'arrencada automàtica fos deshabilitada en canviar a un "
-"nivell de seguretat més alt, perquè el sistema d'impressió és un punt d'atac "
-"potencial.\n"
+" Note that two different options are available after clicking the button:\n"
"\n"
-"Voleu tornar a habilitar l'arrencada automàtica del sistema d'impressió?"
-
-#
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "S'està iniciant el sistema d'impressió en arrencar l'ordinador"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Ara s'instal·larà el sistema d'impressió %s en un sistema que s'executa en "
-"el nivell de seguretat %s.\n"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
"\n"
-"Aquest sistema d'impressió executa un dimoni (procés en segon pla) que "
-"espera els treballs d'impressió i els gestiona. Aquest dimoni és accessible "
-"per ordinadors remots connectats a la xarxa i, per tant, és un possible punt "
-"d'atac. Per tant, només s'arrenquen per defecte uns pocs dimonis triats en "
-"aquest nivell de seguretat.\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
"\n"
-"Realment voleu configurar la impressió en aquest ordinador?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Installing a printing system in the %s security level"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
msgstr ""
-"S'està instal·lant un sistema d'impressió amb el nivell de seguretat %s"
-
-#
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "paranoid"
-msgstr "paranoic"
-
-#
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "high"
-msgstr "alt"
+"Ja ho teniu. S'ha completat la instal·lació i el vostre sistema GNU/Linux "
+"està\n"
+"preparat per fer-lo servir. Simplement premeu \"D'acord\" per reiniciar el "
+"sistema.\n"
+"Podeu iniciar GNU/Linux o Windows, el que volgueu (si teniu doble "
+"arrencada), així\n"
+"que l'ordinador s'hagi reiniciat.\n"
+"\n"
+"El botó \"Avançat\" (només en mode expert) mostra dos botons més:\n"
+"\n"
+" * \"Genera un disquet d'instal·lació automàtica\": per crear un disquet \n"
+"d'instal·lació que permetrà fer una instal·lació completa sense l'ajuda "
+"d'un\n"
+"operador, semblant a la instal·lació que acabeu de configurar.\n"
+"\n"
+" Cal remarcar que es poden triar dues opcions diferents:\n"
+"\n"
+" * \"Repetició\". Aquesta és una instal·lació parcialment automatitzada "
+"ja que\n"
+"el pas de particionar (i només aquest) es manté interactiu;\n"
+"\n"
+" * \"Automatitzada\". Instal·lació completament automatitzada: el disc "
+"dur es\n"
+"reescriu completament i totes les dades es perden.\n"
+"\n"
+" Aquesta característica és força útil quan es fan instal·lacions a un bon "
+"grapat\n"
+"d'ordinadors similars. Mireu la secció d'instal·lació automàtica en la "
+"nostra web.\n"
+"\n"
+" * \"Desa la selecció de paquets\"(*): desa la selecció de paquets tal com\n"
+"s'han seleccionat abans en aquesta instal·lació. Aleshores, quan feu una "
+"altra\n"
+"instal·lació, inseriu el disquet a la unitat lectora i executeu la "
+"instal·lació.\n"
+"Aneu a la pantalla d'ajuda prement la tecla F1, i teclegeu 'linux defcfg="
+"\"floppy\"'.\n"
+"\n"
+"(*) Necessiteu un disquet formatat en FAT (per crear-ne un sota GNU/Linux, "
+"escriviu\n"
+"\"mformat a:\")"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Restarting printing system..."
-msgstr "S'està reiniciant el sistema d'impressió..."
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
#
#: ../../printer/printerdrake.pm:1
@@ -11183,1150 +10865,1251 @@ msgstr "S'està reiniciant el sistema d'impressió..."
msgid "Configuration of a remote printer"
msgstr "Configuració d'una impressora remota"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
+msgid "Moldova"
+msgstr "Moldàvia"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please check if you want to erase your tape before the backup."
msgstr ""
-"L'accés a la xarxa no ha funcionat i no s'ha pogut iniciar. Comproveu la "
-"configuració i el maquinari. Després proveu de configurar la impressora "
-"remota una altra vegada."
+"Marqueu aquesta opció si voleu esborrar la cinta abans de fer la còpia de "
+"seguretat."
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
+msgid "An online platform to respond to enterprise support needs."
msgstr ""
-"La configuració de xarxa feta durant la instal·lació no s'ha pogut iniciar "
-"ara. Comproveu si la xarxa es torna accessible després de reiniciar el "
-"sistema i corregiu la configuració utilitzant el Centre de Control Mandrake, "
-"a la secció \"Xarxa & Internet\"/\"Connexió\", i després configureu la "
-"impressora, també usant el Centre de Control Mandrake, secció \"Maquinari\"/"
-"\"Impressores\""
+"Una plataforma en línia per respondre a les necessitats de suport especials "
+"de les empreses"
#
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Configure the network now"
-msgstr "Configureu la xarxa ara"
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "L'URL ha de començar amb 'ftp:' o 'http:'"
#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Go on without configuring the network"
-msgstr "Continua sense configurar la xarxa"
+msgid "Add a new rule at the end"
+msgstr "Afegeix una regla nova al final"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
msgstr ""
-"Esteu a punt de configurar una impressora remota. Això necessita una "
-"connexió de xarxa operativa, però la vostra xarxa encara no està "
-"configurada. Si continueu sense configurar la xarxa, no podreu utilitzar la "
-"impressora que esteu configurant ara. Què voleu fer?"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Network functionality not configured"
-msgstr "La funcionalitat de xarxa no ha estat configurada"
+msgid ""
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
+msgstr ""
+"Ara podeu proporcionar les opcions per al mòdul %s.\n"
+"Les opcions estan en el format \"nom=valor nom2=valor2 ...\".\n"
+"Per exemple, \"io=0x300 irq=7\""
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Starting network..."
-msgstr "S'està arrencant la xarxa..."
+msgid "Quit without writing the partition table?"
+msgstr "Voleu sortir sense escriure la taula de particions?"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Refreshing printer data..."
-msgstr "S'estan refrescant les dades de les impressores..."
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
-#: ../../printer/printerdrake.pm:1
+#
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Heu tranferit la vostra impressora predeterminada anterior (\"%s\"). Voleu "
-"que també sigui la impressora predeterminada en el nou sistema d'impressió %"
-"s?"
+msgid "Installing packages..."
+msgstr "S'estan instal·lant els paquets..."
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Transfer printer configuration"
-msgstr "Configuració de la transferència de la impressió"
+msgid "Dutch"
+msgstr "Holandès"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "The following packages need to be installed:\n"
+msgstr "Ara s'instal·laran els paquets següents"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Transferring %s..."
-msgstr "S'està transferint %s..."
+msgid "Angola"
+msgstr "Angola"
#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "New printer name"
-msgstr "Nou nom d'impressora"
+msgid "service setting"
+msgstr "paràmetre de servei"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
+msgid "Custom"
+msgstr "Personalitzada"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "File is already used by another loopback, choose another one"
msgstr ""
-"La impressora \"%s\" ja existeix,\n"
-"realment voleu sobreescriure la seva configuració?"
+"Un altre loopback ja està utilitzant el fitxer, escolliu-ne un de diferent"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"El nom de la impressora només pot constar de lletres, números i el caràcter "
-"de subratllat"
+msgid "Read-only"
+msgstr "Només lectura"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Transfer"
-msgstr "Transfereix"
+msgid "Latvia"
+msgstr "Letònia"
-#: ../../printer/printerdrake.pm:1
+#
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Ja existeix una impressora amb nom \"%s\" en %s. \n"
-"Feu clic a \"Transfereix\" per sobreescriure-la.\n"
-"També podeu escriure un nom nou o ometre aquesta impressora."
+msgid "No known driver"
+msgstr "No hi ha cap controlador conegut"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Do not transfer printers"
-msgstr "No transfereixis cap impressora"
+msgid "1 MB"
+msgstr "1 MB"
#: ../../printer/printerdrake.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
msgstr ""
-"\n"
-"Marqueu les impressores que voleu transferir i feu clic a \n"
-"\"Transfereix\"."
+"S'ha detectat automàticament la següent impressora, si no és la que voleu "
+"configurar, escriviu un nom de dispositiu/nom de fitxer en la línia d'entrada"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksound:1
#, c-format
msgid ""
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
+"No s'ha detectat cap targeta de so en el vostre ordinador. Si us plau, "
+"verifiqueu que teniu correctament inserida una targeta de so compatible amb "
+"Linux.\n"
"\n"
-"Tampoc poden transferir-se les impressores configurades amb els fitxers PPD "
-"proporcionats pels seus fabricants o amb controladors nadius per a CUPS."
+"\n"
+"Podeu visitar la nostra base de dades de maquinari a:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"A més, les cues que no han estat creades amb aquest programa o amb "
-"\"foomatic-configure\" no es poden transferir."
+msgid "Configure Local Area Network..."
+msgstr "Configura la xarxa d'àrea local..."
-#: ../../printer/printerdrake.pm:1
+#
+#: ../../services.pm:1
#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD i LPRng no funcionen amb impressores IPP.\n"
+msgid "Launch the sound system on your machine"
+msgstr "Executa el sistema de so en el vostre ordinador"
+#
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ només funciona amb impressores locals, impressores LPD remotes, i "
-"impressores de Socket/TCP.\n"
+msgid "Preparing printer database..."
+msgstr "S'està preparant la base de dades d'impressores..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS no permet l'ús d'impressores en servidors Novell ni que les impressores "
-"enviïn les dades dins d'una ordre formada arbitràriament.\n"
+msgid "Information"
+msgstr "Informació"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Podeu copiar la configuració d'impressió que he fet per la cua %s a la %s, "
-"la cua d'impressió actual. Totes les dades de configuració (nom "
-"d'impressora, descripció, ubicació, tipus de connexió i paràmetres per "
-"defecte) se sobreescriuran, però els treballs d'impressió no seran "
-"transferits.\n"
-"No totes les cues d'impressió poden ser transferides degut a les raons "
-"següents:\n"
+msgid "No network card"
+msgstr "No s'ha trobat cap targeta de xarxa"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-"La impressora ha estat configurada automàticament per permetre-us l'accés "
-"als dispositius de targetes de fotos del vostre PC. Ara podeu accedir a les "
-"targetes de fotos emprant l'eina gràfica \"MtoolsFM\" (menú \"Aplicacions\" -"
-"> \"Eines d'arxivament\" -> \"Gestor de fitxers MTools\") o les utilitats de "
-"la línia d'ordres \"mtools\" (introduïu \"man mtools\" a la línia d'ordres "
-"per a més informació). Trobareu el sistema de fitxers de la targeta sota la "
-"lletra d'unitat \"p:\", o a les lletres següents si teniu més d'una "
-"impressora HP amb unitats de targetes de fotos. Al \"MToolsFM\" podeu "
-"explorar les diferents lletres d'unitat amb el camp que es troba a la "
-"cantonada superior dreta de les llistes de fitxers."
+msgid "Which filesystem do you want?"
+msgstr "Quin sistema de fitxers voleu?"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "3 buttons"
+msgstr "3 botons"
+
+#
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Detailed information"
+msgstr "Informació detallada"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Malta"
+msgstr "Malta"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
+"Printer default settings\n"
"\n"
-"Do not use \"scannerdrake\" for this device!"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
msgstr ""
-"El vostre dispositiu multifunció ha estat configurat automàticament per "
-"poder escanejar. Ara podeu escanejar amb \"scanimage\" (\"scanimage -d hp:%s"
-"\" per especificar l'escàner si n'hi ha més d'un) des de la línia d'ordres o "
-"amb les interfícies gràfiques \"xscanimage\" o \"xsane\". Si esteu "
-"utilitzant el GIMP, també podeu escanejar escollint el punt apropiat en el "
-"menú \"Fitxer\"/\"Adquireix\". Executeu \"man scanimage\" a la línia "
-"d'ordres per a més informació.\n"
+"Paràmetres predeterminats de la impressora\n"
"\n"
-"No utilitzeu \"scannerdrake\" amb aquest dispositiu!"
+"Us hauríeu d'assegurar que la mida de pàgina, el tipus de tinta i el mode "
+"d'impressió (si estan disponibles) i també la configuració del maquinari de "
+"les impressores làser (memòria, unitat dúplex, safates extra) són correctes. "
+"Cal remarcar que amb una qualitat d'impressió o una resolució molt altes la "
+"impressió pot ser molt lenta."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Printing test page(s)..."
-msgstr "S'esta(n) imprimint la(es) pàgina(es) de prova..."
+msgid "This floppy is not FAT formatted"
+msgstr "Aquest disquet no està formatat amb FAT"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Print option list"
-msgstr "Imprimeix la llista d'opcions"
+msgid "Configuring network"
+msgstr "S'està configurant la xarxa"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "S'està imprimint en la impressora \"%s\""
+msgid "Graphic Card"
+msgstr "Targeta gràfica"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "S'està imprimint o llegint una targeta de fotos en \"%s\""
+msgid "Resizing Windows partition"
+msgstr "S'està redimensionant la partició de Windows"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "S'està imprimint/escanejant en \"%s\""
+msgid "Provider dns 1 (optional)"
+msgstr "DNS 1 del proveïdor (opcional)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "S'està imprimint/escanejant/llegint targetes de fotos en \"%s\""
+msgid "Cameroon"
+msgstr "Camerun"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../install_interactive.pm:1
+#, c-format
msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
msgstr ""
-"Per conèixer les opcions disponibles per a la impressora actual, llegiu la "
-"llista de sota o feu clic al botó \"Imprimeix la llista d'opcions\".%s%s\n"
-"\n"
+"Ara podeu fer les particions a %s.\n"
+"Quan acabeu, no oblideu desar-les utiltzant 'w'"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Les ordres \"%s\" i \"%s\" també permeten modificar els paràmetres per a un "
-"treball d'impressió concret. Simplement afegiu els paràmetres que vulgueu a "
-"la línia d'ordres, p.ex. \"%s <fitxer>\".\n"
+msgid "Close"
+msgstr "Tanca"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
msgstr ""
-"També podeu emprar la interfície gràfica \"xpdq\" per configurar opcions i "
-"gestionar treballs d'impressió.\n"
-"Si esteu utilitzant KDE com a entorn gràfic per defecte, teniu un \"botó "
-"d'emergència\", una icona a l'escriptori, etiquetada amb \"ATURA la "
-"impressora!\", que atura tots el treballs d'impressió immediatament en fer-"
-"hi clic. Això és útil, per exemple, quan se us enganxa el paper en la "
-"impressora.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Calendar"
+msgstr "Calendari"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
+"Restore Selected\n"
+"Catalog Entry"
msgstr ""
-"També podeu utilitzar aquesta ordre en el camp \"Ordre d'impressió\" dels "
-"diàlegs d'impressió de moltes aplicacions. Però ara no heu de subministrar "
-"el fitxer perquè el fitxer per imprimir ja el proporciona l'aplicació.\n"
+"Restaura l'entrada\n"
+"del catàleg seleccionada"
+#
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
msgstr ""
-"Per imprimir un fitxer des de la línia d'ordres (finestra de terminal) "
-"utilitzeu l'ordre \"%s <fitxer>\" o \"%s <fitxer>\".\n"
+"Per poder utilitzar una impressora lpd remota, cal que proporcioneu el nom "
+"de l'ordinador central que té el servidor de la impressora i el nom de la "
+"impressora en aquell servidor."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
+msgid "Iceland"
+msgstr "Islàndia"
+
+#: ../../common.pm:1
+#, c-format
+msgid "consolehelper missing"
+msgstr "El consolehelper no hi és"
+
+#: ../../services.pm:1
+#, c-format
+msgid "stopped"
+msgstr "aturat"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Whether the FPU has an irq vector"
msgstr ""
-"Per veure una llista de les opcions disponibles per a la impressora actual "
-"feu clic sobre el botó \"Imprimeix la llista d'opcions\"."
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Ext2"
+msgstr "Ext2"
+
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#, c-format
+msgid "Expand Tree"
+msgstr "Expandeix l'arbre"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
+"The old \"%s\" driver is blacklisted.\n"
"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
+"L'antic controlador \"%s\" ha estat desaprovat.\n"
"\n"
-"L'ordre \"%s\" també us permet modificar els paràmetres per a un treball "
-"d'impressió concret. Simplement afegiu els paràmetres desitjats a la línia "
-"d'ordres, p.ex.: \"%s <fitxer>\". "
+"S'ha vist que causa problemes al nucli en descarregar-se.\n"
+"\n"
+"El nou controlador \"%s\" només s'usarà en la següent arrencada."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Per imprimir un fitxer des de la línia d'ordres (finestra de terminal) useu "
-"l'ordre \"%s <fitxer>\".\n"
+msgid "Expert Mode"
+msgstr "Mode expert"
#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Printer options"
+msgstr "Opcions de la impressora"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Local Network adress"
+msgstr "Adreça de la xarxa local"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Backup your System files. (/etc directory)"
+msgstr "Fes una còpia de seguretat dels fitxers del sistema (directori /etc)."
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
msgid ""
-"Here is a list of the available printing options for the current printer:\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
+"\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
"\n"
+"Do you want to install the updates ?"
msgstr ""
-"Aquí teniu una llista de les opcions d'impressió disponibles per a la "
-"impressora actual:\n"
+"Ara teniu l'oportunitat de baixar paquets actualitzats. Aquests paquets\n"
+"han estat publicats després del llançament de la distribució. Poden "
+"contenir\n"
+"actualitzacions de seguretat o correccions d'errors.\n"
"\n"
+"Per baixar aquests paquets, necessitareu tenir una connexió a Internet\n"
+"operativa.\n"
+"\n"
+"Voleu instal·lar aquestes actualitzacions?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Podeu utilitzar aquestes ordres en el camp \"Ordre d'impressió\" dels "
-"diàlegs d'impressió de moltes aplicacions, però ara no heu de subministrar "
-"el fitxer perquè el fitxer per imprimir ja el proporciona l'aplicació.\n"
+msgid "Samba Server"
+msgstr "Servidor Samba"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
+"Arguments: (arg, alert=1)\n"
+"\n"
+"Enable/Disable IP spoofing protection."
msgstr ""
-"Per imprimir un fitxer des de la línia d'ordres (finestra de terminal) podeu "
-"utilitzar la comanda \"%s <fitxer>\" o una eina d'impressió gràfica: \"xpp "
-"<fitxer>\" o \"kprinter <fitxer>\". Les eines gràfiques us permeten escollir "
-"la impressora i modificar-ne els paràmetres fàcilment.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Did it work properly?"
-msgstr "Ha funcionat correctament?"
+msgid "Australian Optus cable TV"
+msgstr "TV per cable australiana Optus"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
msgstr ""
-"La(es) pàgina(es) de prova s'ha(n) enviat a la impressora.\n"
-"Pot passar un cert temps abans no comenci la impressió.\n"
+" <Tab>/<Alt-Tab> entre elements | <Espai> selecciona | <F12> pant. següent"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
+msgid "Subnet:"
msgstr ""
-"La(es) pàgina(es) de prova s'ha(n) enviat a la impressora.\n"
-"Pot passar un cert temps abans no comenci la impressió.\n"
-"Estat de la impressió:\n"
-"%s\n"
-"\n"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do not print any test page"
-msgstr "No imprimeixis cap pàgina de prova"
+msgid "Zimbabwe"
+msgstr "Zimbabwe"
#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Photo test page"
-msgstr "Pàgina de prova de fotografia"
+msgid "Please enter the host name or IP."
+msgstr "Si us plau, introduïu el nom de l'ordinador o la IP."
#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Alternative test page (A4)"
-msgstr "Pàgina de prova alternativa (A4)"
+msgid "When"
+msgstr "Quan"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "Pàgina de prova alternativa (Carta)"
+msgid "Second DNS Server (optional)"
+msgstr "Segon servidor DNS (opcional)"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Standard test page"
-msgstr "Pàgina de prova estàndard"
+msgid "Finland"
+msgstr "Finlàndia"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Print"
-msgstr "Imprimeix"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
+msgstr ""
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "No test pages"
-msgstr "Cap pàgina de prova"
+msgid "Color depth: %s\n"
+msgstr "Profunditat del color: %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Escolliu les pàgines de prova que voleu imprimir.\n"
-"Nota: la pàgina de prova de fotografia pot ser molt lenta d'imprimir i en "
-"impressores làser amb poca memòria podria no acabar d'imprimir-se. "
-"Normalment n'hi ha prou d'imprimir la pàgina de prova estàndard."
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "No podeu desseleccionar aquest paquet; s'ha d'actualitzar"
#
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Test pages"
-msgstr "Pàgines de prova"
+msgid "Loading from floppy"
+msgstr "S'està carregant des del disquet"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
-"Voleu definir la impressora (\"%s\")\n"
-"com a impressora predeterminada?"
+"El Drakperm s'usa per veure els fitxers que es faran servir per ajustar els "
+"permisos, propietaris i grups a través de l'msec.\n"
+"També podeu editar les vostres pròpies regles, que sobreescriuran les regles "
+"predeterminades."
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
#, c-format
-msgid "Option %s out of range!"
-msgstr "L'opció %s està fora de rang!"
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Option %s must be a number!"
-msgstr "L'opció %s ha de ser un número!"
+msgid "Slovenia"
+msgstr "Eslovènia"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "L'opció %s ha de ser un número enter!"
+msgid ""
+"Enter a user\n"
+"%s"
+msgstr ""
+"Introduïu un usuari\n"
+"%s"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Printer default settings"
-msgstr "Selecció del model d'impressora"
+msgid ""
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
+msgstr ""
+"- Dispositius PCI i USB: es llisten els identificadors PCI/USB del venedor, "
+"del dispositiu, del subvenedor i del subdispositiu"
-#: ../../printer/printerdrake.pm:1
+#
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "ProgressBar color selection"
+msgstr "Selecció del color de la barra de progrés"
+
+#: ../../any.pm:1
#, c-format
msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
msgstr ""
-"Paràmetres predeterminats de la impressora\n"
-"\n"
-"Us hauríeu d'assegurar que la mida de pàgina, el tipus de tinta i el mode "
-"d'impressió (si estan disponibles) i també la configuració del maquinari de "
-"les impressores làser (memòria, unitat dúplex, safates extra) són correctes. "
-"Cal remarcar que amb una qualitat d'impressió o una resolució molt altes la "
-"impressió pot ser molt lenta."
+"Aquestes són les diferents entrades en el menú d'arrencada.\n"
+"Podeu afegir-ne més o canviar-ne les existents."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr ""
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
+#, c-format
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
msgstr ""
-"Per poder imprimir amb la Lexmark inkjet i amb aquesta configuració, "
-"necessiteu els controladors de la impressora inkjet proporcionats per "
-"Lexmark (http://www.lexmark.com/). Dins de la web de Lexmark, feu clic al "
-"botó \"Controladors\" i trieu la secció d'impressores. Aleshores escolliu el "
-"vostre model i després \"Linux\" com a sistema operatiu. Els controladors "
-"vénen en paquets RPM o en seqüències per a l'intèrpret d'ordres amb una "
-"instal·lació gràfica interactiva. No necessiteu fer aquesta configuració amb "
-"la interfície gràfica. Cancel·leu directament després de l'acord de "
-"llicència. Llavors imprimiu pàgines d'alineació dels capçals d'impressió amb "
-"l'ordre \"lexmarkmaintain\" i ajusteu l'alineació dels capçals amb aquest "
-"programa."
+"Executa les ordres programades per l'ordre 'at' a l'hora que es va\n"
+"especificar en executar 'at', i executa les ordres automàtiques quan la\n"
+"mitjana de càrrega és prou baixa."
+
+#: ../../harddrake/v4l.pm:1
+#, c-format
+msgid "Radio support:"
+msgstr "Permet l'ús de la ràdio:"
#
#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing SANE packages..."
+msgstr "S'estan instal·lant els paquets..."
+
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Configuració de la Lexmark inkjet"
+msgid "boot disk creation"
+msgstr "creació de discs d'arrencada"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Els controladors per a la inkjet proporcionats per Lexmark només funcionen "
-"amb impressores locals, i no amb impressores en ordinadors remots o "
-"servidors d'impressió. Si us plau, connecteu la vostra impressora a un port "
-"local o configureu-la en l'ordinador on està connectada."
+msgid "LDAP"
+msgstr "LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Esteu configurant una \"winprinter\" làser OKI. Aquestes impressores\n"
-"usen un protocol de comunicació molt especial i només funcionen quan es "
-"connecten al primer port paral·lel. Si la impressora està connectada a un "
-"altre port o a un servidor d'impressió, connecteu-la al primer port "
-"paral·lel abans d'imprimir la pàgina de prova. Si no ho feu, la impressora "
-"no funcionarà. El controlador de la impressora ignorarà el tipus de connexió."
+msgid "SILO"
+msgstr "SILO"
#
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
#, c-format
-msgid "OKI winprinter configuration"
-msgstr "Configuració de la \"winprinter\" OKI"
+msgid "Change type"
+msgstr "Canvia el tipus"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Si la vostra impressora no és a la llista, escolliu-ne una de compatible "
-"(mireu el manual de la impressora) o una de similar."
+msgid "SILO Installation"
+msgstr "Instal·lació del SILO"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use CD/DVDROM to backup"
+msgstr "Utilitzar CD/DVDROM per fer la còpia de seguretat"
+
+#: ../../install_messages.pm:1
+#, c-format
msgid ""
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
"\n"
"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
+"Felicitats! La instal·lació ha acabat.\n"
+"Traieu el suport d'arrencada i premeu Retorn per tornar a arrencar.\n"
"\n"
"\n"
-"Si us plau, comproveu que Printerdrake ha detectat el model de la impressora "
-"correctament. Busqueu el model correcte a la llista quan el cursor estigui "
-"en un model erroni o en \"Impressora en cru (raw)\"."
+"Trobareu la solució als problemes coneguts d'aquesta versió del\n"
+"Mandrake Linux a la fe d'errates que hi ha a \n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"La informació sobre com configurar el vostre sistema està disponible a\n"
+"l'últim capítol d'instal·lació de la Guia Oficial de l'Usuari del\n"
+"Mandrake Linux."
#
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Which printer model do you have?"
-msgstr "Quin és el model de la vostra impressora?"
+msgid "paranoid"
+msgstr "paranoic"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printer model selection"
-msgstr "Selecció del model d'impressora"
+msgid "Send mail report after each backup to:"
+msgstr "Envia un informe per correu electrònic després de cada còpia a:"
-#
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Reading printer database..."
-msgstr "S'està llegint la base de dades d'impressores..."
+msgid ""
+"This command you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications. But here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr ""
+"També podeu utilitzar aquesta ordre en el camp \"Ordre d'impressió\" dels "
+"diàlegs d'impressió de moltes aplicacions. Però ara no heu de subministrar "
+"el fitxer perquè el fitxer per imprimir ja el proporciona l'aplicació.\n"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Select model manually"
-msgstr "Selecciona el model manualment"
+msgid "Resolution"
+msgstr "Resolució"
#
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The model is correct"
-msgstr "El model és correcte"
+msgid ""
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
+msgstr ""
+"Per poder imprimir a una impressora SMB, heu d'indicar el nom de\n"
+"l'ordinador central SMB (tingueu en compte que pot ser diferent del seu nom\n"
+"TCP/IP) i possiblement l'adreça IP del servidor d'impressió, així com el nom "
+"de compartició de la impressora a què voleu accedir i el nom d'usuari,\n"
+"contrasenya i informació de grup si són necessaris."
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
+"Arguments: (arg)\n"
"\n"
-"%s"
+" Accept/Refuse icmp echo."
msgstr ""
-"Printerdrake ha comparat el nom del model resultant de la detecció "
-"automàtica d'impressores amb els models llistats en la seva base de dades "
-"d'impressores per trobar el millor resultat. L'elecció pot ser dolenta, "
-"especialment si la vostra impressora no es troba a la base de dades. Per "
-"tant, mireu si l'elecció és correcta i feu clic a \"El model és correcte\" "
-"si ho és, o a \"Selecciona el model manualment\" per tal d'escollir "
-"manualment el model d'impressora en la pantalla següent.\n"
-"\n"
-"Per la vostra impressora el Printerdrake ha trobat:\n"
-"\n"
-"%s"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Your printer model"
-msgstr "El model de la vostra impressora"
+msgid "reconfigure"
+msgstr "torna a configurar"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Preparing printer database..."
-msgstr "S'està preparant la base de dades d'impressores..."
+msgid ""
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+msgstr ""
+"La vostra targeta pot tenir acceleració 3D de maquinari amb l'Xfree %s,\n"
+"TINGUEU EN COMPTE QUE ES TRACTA D'UN SUPORT EXPERIMENTAL; L'ORDINADOR ES POT "
+"PENJAR."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Location"
-msgstr "Ubicació"
+msgid "Xinetd Service"
+msgstr "Servei Xinetd"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "Description"
-msgstr "Descripció"
+msgid "access to network tools"
+msgstr "accés a les eines de xarxa"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Name of printer"
-msgstr "Nom de la impressora"
+msgid "Firmware-Upload for HP LaserJet 1000"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
msgstr ""
-"Cada impressora necessita un nom (per exemple \"impressora\"). Els camps de "
-"Descripció i Ubicació no són necessaris. Són comentaris per als usuaris."
+"Mandrake Linux 9.1 us permet utilitzar el programari més actual per "
+"reproduir fitxers d'àudio, editar i organitzar les vostres imatges i fotos, "
+"i reproduir vídeos"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Enter Printer Name and Comments"
+msgid "Here is a list of all auto-detected printers. "
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Making printer port available for CUPS..."
+msgid ""
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
msgstr ""
+"S'ha produït un error en instal·lar l'aboot. \n"
+"Voleu intentar igualment la instal·lació encara que això destrueixi la "
+"primera partició?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Options Description:\n"
+"\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
+"\n"
+msgstr ""
+"descripció de les opcions:\n"
+"\n"
+" En aquest pas, el Drakbackup us permet modificar:\n"
+"\n"
+" - El mode de compressió:\n"
+" \n"
+" Si seleccioneu compressió bzip2, comprimireu\n"
+" les dades millor que amb gzip (una millora entre 2-10 %).\n"
+" Aquesta opció no està activada per defecte perquè\n"
+" necessita molt més temps (deu vegades més).\n"
+" \n"
+" - El mode d'actualització:\n"
+"\n"
+" Aquesta opció us permet actualitzar una còpia de seguretat,\n"
+" però no és gaire útil perquè s'han de descomprimir les\n"
+" dades copiades abans de poder-les actualitzar.\n"
+" \n"
+" - El mode .backupignore:\n"
+"\n"
+" Igual que el cvs, el Drakbackup ignorarà totes les referències\n"
+" incloses en els fitxers .backupignore de cada directori.\n"
+" P.ex.: \n"
+" /*> cat .backupignore*/\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
+"\n"
+
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Checking device and configuring HPOJ..."
+msgid ""
+"Restore Selected\n"
+"Files"
msgstr ""
+"Restaura els fitxers\n"
+"seleccionats"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Photo memory card access on your HP multi-function device"
+msgid ""
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
msgstr ""
+"S'ha trobat %s, voleu suprimir-lo?\n"
+"Avís: Si ja heu seguit aquest procés, probablement us calgui\n"
+"purgar l'entrada del paràmetre 'authorized_keys' en el servidor."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr ", dispositiu multifunció"
+#: ../../network/tools.pm:1
+#, c-format
+msgid "Please fill or check the field below"
+msgstr "Si us plau, ompliu o marqueu el camp inferior"
#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing mtools packages..."
-msgstr "S'estan instal·lant els paquets..."
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "Voleu desar les modificacions a /etc/fstab"
-#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing SANE packages..."
-msgstr "S'estan instal·lant els paquets..."
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Boot Protocol"
+msgstr "Protocol d'arrencada"
-#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing HPOJ package..."
-msgstr "S'estan instal·lant els paquets..."
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "LVM-disks %s\n"
+msgstr "Discs LVM %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
+msgid "The package %s is needed. Install it?"
+msgstr "Cal instal·lar el paquet %s. Voleu instal·lar-lo?"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "A command line must be entered!"
-msgstr "Heu d'entrar un URI vàlid!"
+#: ../../services.pm:1
+#, c-format
+msgid "On boot"
+msgstr "En arrencar"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Command line"
-msgstr "Nom de domini"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Bus identification"
+msgstr "Identificació del bus"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
+msgid "Please make a backup of your data first"
+msgstr "Si us plau, feu primer una còpia de seguretat de les vostres dades"
-#: ../../printer/printerdrake.pm:1
+#
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Pipe into command"
-msgstr "Redirecciona el treball cap a una ordre"
+msgid "Vatican"
+msgstr "Letó"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Detected model: %s %s"
-msgstr "Model detectat: %s %s"
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr "Teniu més d'un disc dur; en quin voleu instal·lar el Linux?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "A valid URI must be entered!"
-msgstr "Heu d'entrar un URI vàlid!"
+msgid "Boot ISO"
+msgstr "ISO d'arrencada"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer Device URI"
-msgstr "Dispositiu URI d'impressora"
+msgid "Eritrea"
+msgstr "Eritrea"
-#: ../../printer/printerdrake.pm:1
+#
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
+msgid "Remove List"
+msgstr "Esborra la llista"
+
+#: ../../share/advertising/05-desktop.pl:1
+#, c-format
+msgid "A customizable environment"
msgstr ""
-"Podeu especificar directament l'URI per accedir a la impressora. L'URI ha de "
-"complir les especificacions CUPS o Foomatic. Cal remarcar que alguns gestors "
-"de cues no accepten tots els tipus d'URI."
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Port"
-msgstr "Port"
+msgid "Inuktitut"
+msgstr "Inuktitut"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer host name or IP"
-msgstr "Nom o IP de l'ordinador central de la impressora"
+msgid "Morocco"
+msgstr "Marroc"
#
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The port number should be an integer!"
-msgstr "El número de port ha de ser enter!"
+msgid "Which printer model do you have?"
+msgstr "Quin és el model de la vostra impressora?"
#
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Falta el nom o la IP de l'ordinador central de la impressora!"
+msgid "Add a new printer"
+msgstr "Afegiu una impressora"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"Per imprimir a una impressora TCP o Socket, heu d'indicar el nom de xarxa o "
-"la IP de la impressora i, opcionalment, el número de port. En els servidors "
-"HP JetDirect el número del port normalment és el 9100, en els altres pot "
-"variar. Mireu el manual del vostre maquinari."
+msgid " All of your selected data have been "
+msgstr " Totes les dades seleccionades han estat "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
-msgstr ""
-"Trieu una de les impressores detectades de la llista, o introduïu el nom de "
-"l'ordinador central o la IP i opcionalment el número de port (per defecte és "
-"el 9100) en els quadres de text."
+msgid "<-- Delete"
+msgstr "<-- Suprimeix"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "Opcions de la impressora per a TCP/Socket"
+msgid "Nepal"
+msgstr "Nepal"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Host \"%s\", port %s"
-msgstr "Ordinador central \"%s\", port %s"
+msgid "cpu # "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", ordinador central \"%s\", port %s"
+msgid "chunk size"
+msgstr "mida del fragment"
-#
-#: ../../printer/printerdrake.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "Scanning network..."
-msgstr "S'està escanejant la xarxa..."
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "ordres abans de l'arrencada, o 'c' per obtenir una linia d'ordres."
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Printer auto-detection"
-msgstr "Detecció automàtica d'impressores"
+msgid "Problems installing package %s"
+msgstr "Hi ha hagut problemes en instal·lar el paquet %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "NCP queue name missing!"
-msgstr "Falta el nom de la cua NCP!"
+msgid "You will receive an alert if the load is higher than this value"
+msgstr "Rebreu un avís si la càrrega és més gran que aquest valor"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "NCP server name missing!"
-msgstr "Falta el nom del Servidor NCP!"
+msgid ""
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
+msgstr ""
+"\n"
+"\n"
+"Per trametre un informe d'error de programació, feu clic al botó 'Informa'.\n"
+"S'obrirà una finestra del navegador web amb la pàgina https://drakbug."
+"mandrakesoft.com\n"
+"on trobareu un formulari per omplir. La informació que es mostra més amunt "
+"s'enviarà al servidor.\n"
+"\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Add a scanner manually"
+msgstr "Seleccioneu l'usuari manualment"
+
+#
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Print Queue Name"
-msgstr "Nom de la cua d'impressió"
+msgid "Reload partition table"
+msgstr "Torna a carregar la taula de particions"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Printer Server"
-msgstr "Servidor de la impressora"
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr "Sí, vull l'entrada automàtica amb aquest (usuari, escriptori)"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Per poder imprimir a una impressora NetWare, heu de proporcionar el nom del\n"
-"servidor d'impressió NetWare (tingueu en compte que pot ser diferent del "
-"nom\n"
-"TCP/IP del seu ordinador central), així com el nom de la cua d'impressió de\n"
-"la impressora a la qual voleu accedir i el nom d'usuari i contrasenya si "
-"són\n"
-"necessaris."
+msgid "Search for fonts in installed list"
+msgstr "Cerca les fonts en la llista de les instal·lades"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "NetWare Printer Options"
-msgstr "Opcions de la impressora NetWare"
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr "La xarxa local no finalitza amb '.0', ho deixem córrer."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Boot"
+msgstr "Arrel"
+
+#
+#: ../../harddrake/v4l.pm:1
#, c-format
+msgid "Tuner type:"
+msgstr "Tipus de sintonitzador:"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"Connecteu la impressora a un servidor Linux i feu que els ordinadors Windows "
-"s'hi connectin com clients.\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
"\n"
-"Realment voleu continuar configurant aquesta impressora tal com s'està fent "
-"ara?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
msgstr ""
-"Configureu el vostre servidor Windows per tal que la impressora estigui "
-"disponible sota el protocol IPP i configureu la impressió en aquest "
-"ordinador amb el tipus de connexió \"%s\" en el Printerdrake.\n"
+"Aquí se seleccionarà el sistema d'impressió per al vostre ordinador. Altres\n"
+"sistemes operatius us n'oferiran un, però el Mandrake Linux n'ofereix dos.\n"
"\n"
+" * \"pdq\" que vol dir \"print, don't queue\" (imprimeix, no facis cua), és\n"
+"l'opció escollida si teniu una connexió directa amb la impressora i voleu\n"
+"evitar aquelles cues d'impressió interminables, i no teniu impressores de \n"
+"xarxa. Només funcionarà sobre xarxes molt senzilles i és bastant lent per a\n"
+"xarxes en general. Escolliu \"pdq\" si és la vostra primera incursió en GNU/"
+"Linux.\n"
+"Podeu canviar la vostra elecció després de la instal·lació executant el \n"
+"PrinterDrake des del Centre de Control Mandrake, fent clic al botó \"Expert"
+"\".\n"
+"\n"
+" * \"%s\" vol dir \"Common Unix Printing System\" (Sistema d'impressió comú\n"
+"de Unix), és el millor a l'hora d'imprimir a la vostra impressora local i a "
+"la\n"
+"meitat del planeta. És senzill i pot actuar com a servidor o client per a "
+"l'antic\n"
+"sistema d'impressió \"lpd\". Per tant, és compatible amb els sistemes "
+"anteriors.\n"
+"Pot fer moltes coses, però la configuració bàsica es tant senzilla com la de "
+"\"pdq\".\n"
+"Si necessiteu CUPS per emular un servidor \"lpd\", heu d'habilitar el "
+"dimoni\n"
+"\"cups-lpd\". Té una interfície gràfica per imprimir i escollir les "
+"opcions \n"
+"d'impressió."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
+msgid "\"Menu\" key"
+msgstr "tecla de \"Menú\""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
msgstr ""
-"Ara es configurarà la impressió cap a un usuari de Windows amb contrasenya. "
-"Degut a una fallada en l'arquitectura del programari del client Samba la "
-"contrasenya es mostra en text clar en la línia d'ordres que el client Samba "
-"utilitza per transmetre i imprimir un treball en el Servidor Windows. Per "
-"tant, és possible per qualsevol usuari d'aquell ordinador de veure la "
-"contrasenya en la pantalla simplement escrivint ordres tals com \"ps auxwww"
-"\".\n"
-"\n"
-"Us recomanem que utilitzeu alguna de les següents alternatives (en tots el "
-"casos heu d'estar segur que només els ordinadors de la vostra xarxa local "
-"tenen accés al vostre Servidor Windows, per exemple utilitzant un "
-"tallafoc):\n"
-"\n"
-"Utilitzeu un compte sense contrasenya en el Servidor Windows, tal com \"GUEST"
-"\" o un compte especial dedicat a la impressió. No tragueu la protecció de "
-"la contrasenya d'un compte personal o del compte de l'administrador.\n"
"\n"
-"Configureu el vostre Servidor Windows fent que la impressora estigui "
-"disponible a través del protocol LPD. Aleshores, definiu en el Printerdrake "
-"la impressió en aquest ordinador amb el tipus de connexió \"%s\".\n"
"\n"
+"Si us plau, comproveu que Printerdrake ha detectat el model de la impressora "
+"correctament. Busqueu el model correcte a la llista quan el cursor estigui "
+"en un model erroni o en \"Impressora en cru (raw)\"."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "SECURITY WARNING!"
-msgstr "AVÍS DE SEGURETAT!"
+msgid "Security Administrator:"
+msgstr "Administrador de seguretat:"
-#: ../../printer/printerdrake.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Samba share name missing!"
-msgstr "Falta el nom de compartició de Samba!"
+msgid "Please enter your login"
+msgstr "Si us plau, introduïu la vostra identificació (login)"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Cal que subministreu o bé el nom del servidor o bé la seva IP!"
+msgid "if set to yes, check permissions of files in the users' home."
+msgstr ""
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Auto-detected"
-msgstr "Detectada automàticament"
+msgid ""
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
+msgstr ""
+"No teniu cap connexió a Internet.\n"
+"Creeu-ne una fent clic a 'Configura'"
-#: ../../printer/printerdrake.pm:1
+#
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Workgroup"
-msgstr "Grup de treball"
+msgid "Fonts copy"
+msgstr "Còpia de fonts"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Share name"
-msgstr "Nom de compartició"
+msgid "Automated"
+msgstr "Automàtica"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "SMB server IP"
-msgstr "IP del servidor SMB"
+msgid "Do you want to test the configuration?"
+msgstr "Voleu comprovar la configuració?"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SMB server host"
-msgstr "Ordinador central del servidor SMB"
+msgid ""
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
+msgstr ""
+"La impressora \"%s\" ha estat suprimida d'Star Office/OpenOffice.org/GIMP "
+"amb èxit."
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+" to the Internet as a client.\n"
+"\n"
+"High: There are already some restrictions, and more automatic checks "
+"are run every night.\n"
+"\n"
+"Higher: The security is now high enough to use the system as a server "
+"which can accept\n"
+" connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+" should choose a lower level.\n"
+"\n"
+"Paranoid: This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+" features are at their maximum\n"
+"\n"
+"Security Administrator:\n"
+" If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+" email)"
msgstr ""
-"Si la impressora desitjada ha estat detectada automàticament, només cal que "
-"la seleccioneu a la llista i que hi afegiu el nom d'usuari, la contrasenya i "
-"el grup de treball, si són necessaris."
+"Estàndard: Aquesta és la seguretat estàndard recomanada per a un ordinador "
+"que es connectarà a Internet com a client.\n"
+"\n"
+"Alta: Hi ha algunes restriccions, i cada nit s'executen més tests que "
+"al nivell estàndard.\n"
+"\n"
+"Més alta: La seguretat és prou elevada perquè el sistema funcioni com a "
+"servidor que pugui acceptar connexions de diversos clients. Si aquesta "
+"màquina només serà un client a Internet, hauríeu de triar un nivell més "
+"baix.\n"
+"\n"
+"Paranoic: Similar al nivell anterior, però el sistema es tanca completament "
+"i les característiques de seguretat estan al màxim\n"
+"\n"
+"Administrador de seguretat:\n"
+" Si les \"Alarmes de seguretat\" estan activades, s'enviaran a "
+"aquest usuari (nom d'usuari o adreça electrònica)"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Save packages selection"
+msgstr "Desa la selecció de paquets"
#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Per poder imprimir a una impressora SMB, heu d'indicar el nom de\n"
-"l'ordinador central SMB (tingueu en compte que pot ser diferent del seu nom\n"
-"TCP/IP) i possiblement l'adreça IP del servidor d'impressió, així com el nom "
-"de compartició de la impressora a què voleu accedir i el nom d'usuari,\n"
-"contrasenya i informació de grup si són necessaris."
+msgid "Remove the last item"
+msgstr "Esborra l'últim element"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opcions de la impressora SMB (Windows 9x/NT)"
+msgid "User list to restore (only the most recent date per user is important)"
+msgstr ""
+"Llista d'usuaris per restaurar (només és important la data més recent per "
+"usuari)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Impressora \"%s\" en el servidor \"%s\""
+msgid "No net boot images created!"
+msgstr "No s'ha creat cap imatge d'arrencada des de xarxa"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", impressora \"%s\", en el servidor \"%s\""
+msgid "use pptp"
+msgstr "utilitza pptp"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Remote printer name missing!"
-msgstr "Falta el nom de la impressora remota!"
+msgid "Choose which services should be automatically started at boot time"
+msgstr ""
+"Escolliu els serveis que s'han d'iniciar automàticament durant l'arrencada"
#
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remote host name missing!"
-msgstr "Falta el nom de l'ordinador central remot!"
+#, fuzzy, c-format
+msgid "Learn how to use this printer"
+msgstr "Apreneu a utilitzar aquesta impressora"
#
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote printer name"
-msgstr "Nom de la impressora remota"
+msgid "Configure the network now"
+msgstr "Configureu la xarxa ara"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Remote host name"
-msgstr "Nom de l'ordinador central remot"
+msgid "Choose a mirror from which to get the packages"
+msgstr "Escolliu una rèplica des de la qual aconseguir els paquets"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
msgstr ""
-"Per poder utilitzar una impressora lpd remota, cal que proporcioneu el nom "
-"de l'ordinador central que té el servidor de la impressora i el nom de la "
-"impressora en aquell servidor."
+"El redimensionador de la FAT no pot gestionar la vostra partició. \n"
+"S'ha produït l'error següent: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Opcions de la impressora lpd remota"
+msgid "Which sector do you want to move it to?"
+msgstr "A quin sector ho voleu moure?"
+
+#
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Do you want to click on this button?"
+msgstr "Voleu fer clic en aquest botó?"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Bahamas"
+msgstr "Bahames"
#
#: ../../printer/printerdrake.pm:1
@@ -12334,96 +12117,127 @@ msgstr "Opcions de la impressora lpd remota"
msgid "Manual configuration"
msgstr "Configuració manual"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Heu d'escollir/introduir una impressora/dispositiu!"
+msgid "search"
+msgstr "cerca"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
msgstr ""
-" (Ports Paral·lel: /dev/lp0, /dev/lp1, etc., equivalents a LPT1:, LPT2:, "
-"etc.; 1a impressora USB: /dev/usb/lp0, 2a impressora USB: /dev/usb/lp1, "
-"etc.)."
+"Aquest paquet carrega el mapa de teclat seleccionat segons s'ha definit\n"
+"a /etc/sysconfig/keyboard. Es pot seleccionar mitjançant la utilitat\n"
+"kbdconfig.\n"
+"Per a la majoria d'ordinadors, s'ha de deixar habilitat."
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Please choose the port that your printer is connected to."
+msgid "Xpmac (installation display driver)"
+msgstr "Xpmac (instal·lació del controlador de pantalla)"
+
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, c-format
+msgid "Zeroconf host name must not contain a ."
msgstr ""
-"Si us plau, seleccioneu el port al qual teniu connectada la impressora."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
msgstr ""
-"Escolliu el port al qual està connectada la impressora o escriviu el nom de "
-"dispositiu/nom de fitxer en la línia d'entrada"
+"El syslog és el sistema que utilitzen molts dimonis per registrar\n"
+"missatges en diversos fitxers de registre del sistema. És aconsellable\n"
+"executar-lo sempre."
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr ""
-"Si us plau, seleccioneu el port al qual teniu connectada la impressora."
+msgid "Unknown/Others"
+msgstr "Desconegut|Genèric"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
-msgstr ""
-"Aquí teniu una llista de les impressores que s'han detectat. Escolliu la "
-"impressora que voleu configurar. La configuració de la impressora es farà "
-"automàticament. Si la vostra impressora no ha estat correctament detectada o "
-"si preferiu personalitzar la seva configuració, habiliteu \"Configuració "
-"manual\"."
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "No TV Card detected!"
+msgstr "No s'ha detectat cap targeta de TV!"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr ""
+msgid "Options"
+msgstr "Opcions"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr ""
+msgid "The printer \"%s\" is set as the default printer now."
+msgstr "La impressora \"%s\" és ara la impressora per defecte."
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#, c-format
msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
+msgstr ""
+"Esteu configurant una \"winprinter\" làser OKI. Aquestes impressores\n"
+"usen un protocol de comunicació molt especial i només funcionen quan es "
+"connecten al primer port paral·lel. Si la impressora està connectada a un "
+"altre port o a un servidor d'impressió, connecteu-la al primer port "
+"paral·lel abans d'imprimir la pàgina de prova. Si no ho feu, la impressora "
+"no funcionarà. El controlador de la impressora ignorarà el tipus de connexió."
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
msgstr ""
-"S'ha detectat la següent impressora. La configuració de la impressora es "
-"farà automàticament. Si la vostra impressora no ha estat correctament "
-"detectada o si preferiu personalitzar la seva configuració, habiliteu "
-"\"Configuració manual\"."
+#
#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Auto-detected"
+msgstr "Detectada automàticament"
+
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "The following printer was auto-detected. "
+msgid ""
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-"Les impressores següents\n"
+"Ara es configurarà l'ordinador per tal que comparteixi la connexió a "
+"Internet.\n"
+"Amb aquesta característica, altres ordinadors de la vostra xarxa local\n"
+"podran utilitzar la connexió a Internet d'aquest ordinador.\n"
"\n"
+"Assegureu-vos d'haver configurat l'accés a Internet i a la xarxa local amb "
+"el drakconnect abans de continuar.\n"
+"Nota: per configurar una xarxa d'àrea local (LAN), us cal un adaptador de "
+"xarxa dedicat."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../install_steps_interactive.pm:1
+#, c-format
msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
-"Escolliu el port al qual està connectada la impressora o escriviu el nom de "
-"dispositiu/nom de fitxer en la línia d'entrada"
+"No hi ha prou espai lliure per un 1MB de bootstrap! La instal·lació "
+"continuarà, però per iniciar el sistema necessitareu crear la partició de "
+"bootstrap amb el DiskDrake"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
@@ -12434,1903 +12248,1534 @@ msgstr ""
"Escolliu el port al qual està connectada la impressora o escriviu el nom de "
"dispositiu/nom de fitxer en la línia d'entrada"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr ""
-"Escolliu el port al qual està connectada la impressora o escriviu el nom de "
-"dispositiu/nom de fitxer en la línia d'entrada"
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Refuse"
+msgstr "Rebutja"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "HFS"
+msgstr "HFS"
+
+#: ../../services.pm:1
+#, c-format
msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
msgstr ""
-"S'ha detectat automàticament la següent impressora, si no és la que voleu "
-"configurar, escriviu un nom de dispositiu/nom de fitxer en la línia d'entrada"
+"El HardDrake fa una prova del maquinari, i opcionalment configura\n"
+"el maquinari nou/canviat."
-#: ../../printer/printerdrake.pm:1
+#
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, c-format
-msgid "Available printers"
-msgstr "Impressores disponibles"
+msgid "Remote Printers"
+msgstr "Impressores remotes"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "No printer found!"
-msgstr "No s'ha trobat cap impressora!"
+msgid "Creating and formatting file %s"
+msgstr "S'està creant i formatant el fitxer %s"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "You must enter a device or file name!"
-msgstr "Heu d'entrar un nom de dispositiu o de fitxer!"
+msgid "if set to yes, check additions/removals of sgid files."
+msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
-"No s'ha trobat cap impressora! Per instal·lar-ne una manualment entreu el "
-"dispositiu/fitxer a la línia d'entrada (Ports Paral·lel: /dev/lp0, /dev/lp1, "
-"etc., equivalents a LPT1:, LPT2:, etc.; 1a impresora USB: /dev/usb/lp0, 2a "
-"impressora USB: /dev/usb/lp1, etc.)."
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Choose an existing LVM to add to"
+msgstr "Escolliu un LVM existent al qual afegir-ho"
#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Local Printer"
-msgstr "Impressora local"
+msgid "xfs restart"
+msgstr "reinicialització de l'xfs"
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "USB printer \\#%s"
-msgstr "Impressora USB \\/*%s"
+#, c-format
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
+"La impressora \"%s\" ja existeix,\n"
+"realment voleu sobreescriure la seva configuració?"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "Impressora en el port paral·lel \\/*%s"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No partition available"
+msgstr "No hi ha particions disponibles"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Impressora \"%s\" en servidor SMB/Windows \"%s\""
+msgid "Use the scanners on hosts: "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Impressora de xarxa \"%s\", port %s"
+msgid "Unselected All"
+msgstr "Desselecciona-ho tot"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Detected %s"
-msgstr "S'ha detectat %s"
+msgid "Domain Name Resolver"
+msgstr "Sistema de resolució de nom de domini"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ", impressora \"%s\" en servidor SMB/Windows \"%s\""
+msgid "Encryption key (again)"
+msgstr "Clau de xifratge (un altre cop)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", impressora de xarxa \"%s\", port %s"
+msgid "Samba share name missing!"
+msgstr "Falta el nom de compartició de Samba!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Felicitats, la impressora s'ha instal·lat i configurat correctament!\n"
-"\n"
-"Podeu imprimir utilitzant l'ordre \"Imprimeix\" de les aplicacions "
-"(normalment en el menú \"Fitxer\").\n"
-"\n"
-"Si voleu afegir, esborrar o canviar el nom a una impressora, o si voleu "
-"canviar les opcions per defecte (safata d'entrada, qualitat impressió...), "
-"seleccioneu \"Impressora\" en la secció \"Maquinari\" del Centre de Control "
-"Mandrake."
+msgid "True Type install done"
+msgstr "Instal·lació de True Type feta"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr ""
-"Detecta automàticament les impressores connectades a màquines amb Microsoft "
-"Windows"
+msgid "Detection in progress"
+msgstr "Detecció en procés"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr ""
-"Detecta automàticament les impressores connectades directament a la xarxa "
-"local"
+msgid "Build Whole Kernel -->"
+msgstr "Munta tot el nucli -->"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Detecta automàticament les impressores connectades a aquesta màquina"
+msgid "Welcome to %s"
+msgstr "Benvingut a %s"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Benvingut a l'auxiliar de configuració de la impressora\n"
-"\n"
-"Aquest auxiliar us ajudarà a instal·lar les impressores connectades a aquest "
-"ordinador.\n"
-"\n"
-"Si teniu impressores connectades a aquesta màquina, endolleu-les i engegueu-"
-"les per tal de poder-les detectar automàticament.\n"
-"\n"
-"Feu clic a \"Següent\" quan estigueu preparat, o a \"Cancel·la\" si no voleu "
-"configurar ara les impressores."
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "Inseriu el disquet d'Actualització de Mòduls a la unitat %s"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Bootsplash"
+msgstr "Bootsplash"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
+"The following printer\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"%s%s\n"
+"is directly connected to your system"
msgstr ""
"\n"
-"Benvingut a l'auxiliar de configuració de la impressora\n"
-"\n"
-"Aquest auxiliar us ajudarà a instal·lar les impressores connectades a aquest "
-"ordinador o connectades directament a la xarxa local.\n"
-"\n"
-"Si teniu impressores connectades a aquesta màquina, endolleu-les i engegueu-"
-"les per tal de poder-les detectar automàticament. Engegueu també les "
-"impressores de la xarxa local.\n"
-"\n"
-"Noteu que la detecció automàtica d'impressores de la xarxa local triga més "
-"que la detecció d'impressores connectades directament a la màquina. Seria "
-"millor que desactivéssiu la detecció automàtica d'impressores en xarxa si no "
-"la necessiteu.\n"
-"\n"
-"Feu clic a \"Següent\" quan estigueu preparat, o a \"Cancel·la\" si no voleu "
-"configurar ara les impressores."
+"Hi ha una impressora desconeguda connectada directament a l'ordinador."
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Benvingut a l'auxiliar de configuració de la impressora\n"
-"\n"
-"Aquest auxiliar us ajudarà a instal·lar les impressores connectades "
-"directament a l'ordinador, o a la xarxa, o a una màquina Windows remota.\n"
-"\n"
-"Si teniu impressores connectades a aquesta màquina, endolleu-les i engegueu-"
-"les per tal de poder-les detectar automàticament. Engegueu també les "
-"impressores de xarxa i les màquines Windows que tenen impressores "
-"connectades.\n"
-"\n"
-"Noteu que la detecció automàtica d'impressores de la xarxa local triga més "
-"que la detecció d'impressores connectades directament a la màquina. Seria "
-"millor que desactivéssiu la detecció automàtica d'impressores en xarxa o en "
-"màquina Windows si no la necessiteu.\n"
-"\n"
-"Feu clic a \"Següent\" quan estigueu preparat, o a \"Cancel·la\" si no voleu "
-"configurar ara les impressores."
+msgid "Printer sharing on hosts/networks: "
+msgstr "Compartició de fitxers"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
"\n"
-"Benvingut a l'auxiliar de configuració de la impressora\n"
-"\n"
-"Aquest auxiliar us permetrà instal·lar impressores locals o remotes per usar-"
-"les en aquest ordinador i també des d'altres ordinadors de la xarxa.\n"
-"\n"
-"Us demanarà la informació necessària per definir impressores i us "
-"proporcionarà accés als controladors disponibles de les impressores, les "
-"seves opcions i els tipus de connexions d'impressores."
+"L'ordre \"%s\" també us permet modificar els paràmetres per a un treball "
+"d'impressió concret. Simplement afegiu els paràmetres desitjats a la línia "
+"d'ordres, p.ex.: \"%s <fitxer>\". "
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
+"En alguns casos, el controlador de %s necessita informació addicional\n"
+"per funcionar correctament, tot i que normalment funciona bé sense ella.\n"
+"Voleu especificar opcions addicionals o deixar que el controlador\n"
+"cerqui al vostre ordinador la informació que necessita? Aquesta recerca\n"
+"podria penjar l'ordinador, però això no causaria cap dany."
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ")"
-msgstr ""
+msgid "Not the correct CD label. Disk is labelled %s."
+msgstr "L'etiqueta del CD no és correcta. L'etiqueta d'aquest disc és %s."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid " on "
+msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
+"\n"
+"%s\n"
+"\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
+"Benvingut a la utilitat de compartició de la connexió a Internet!\n"
+"\n"
+"%s\n"
+"\n"
+"Feu clic a 'Configura' per executar l'auxiliar de configuració."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "("
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuring printer ..."
-msgstr "S'està configurant la impressora \"%s\"..."
+msgid "Cuba"
+msgstr "Cuba"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Searching for new printers..."
msgstr "Impressores disponibles"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
-msgstr ""
-"NOTA: Segons el model de la impressora i el sistema d'impressió, "
-"s'instal·laran fins a %d MB de programari addicional."
-
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr "Esteu segur que voleu habilitar la impressió en aquesta màquina?\n"
+msgid "Belize"
+msgstr "Belize"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Voleu habilitar la impressió a les impressores anteriors?\n"
+msgid " (multi-session)"
+msgstr " (multisessió)"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "Voleu habilitar la impressió a les impressores de la xarxa local?\n"
+msgid "Kernel Boot Timeout"
+msgstr "Temps màxim d'arrencada del nucli"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"Voleu habilitar la impressió a les impressores anteriors o a les impressores "
-"de la xarxa local?\n"
+"La vostra targeta pot tenir acceleració 3D de maquinari, però només amb "
+"l'Xfree %s.\n"
+"L'XFree %s, que pot tenir un suport millor en 2D, suporta la vostra targeta."
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
+msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr ""
-" (Assegureu-vos que totes les impressores estan connectades i engegades.)\n"
+"L'auxiliar de particionament del DrakX ha trobat les solucions següents:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr "No s'ha trobat cap impressora connectada directament a l'ordinador"
+msgid "Hungarian"
+msgstr "Hongarès"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
msgstr ""
-"\n"
-"Hi ha %d impressores desconegudes connectades directament a l'ordinador."
+"Seleccioneu el vostre proveïdor.\n"
+"Si no és a la llista, seleccioneu \"No és a la llista\""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"Hi ha una impressora desconeguda connectada directament a l'ordinador."
+msgid "Automatic time synchronization (using NTP)"
+msgstr "Sincronització automàtica de la hora (usant NTP)"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr ""
-"\n"
-"Hi ha una impressora desconeguda connectada directament a l'ordinador."
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "8 MB"
+msgstr "8 MB"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"\n"
-"Hi ha una impressora desconeguda connectada directament a l'ordinador."
+#
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "LDAP Server"
+msgstr "Servidor LDAP"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../services.pm:1
+#, c-format
msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"\n"
-"Hi ha una impressora desconeguda connectada directament a l'ordinador."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "and %d unknown printers"
-msgstr ""
-"\n"
-"i %d impressores desconegudes estan "
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "and one unknown printer"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
msgstr ""
-"\n"
-"i una impressora desconeguda estan "
+"El suport PCMCIA serveix normalment per funcionar amb coses com ara "
+"l'ethernet\n"
+"i els mòdems en portàtils. No s'iniciarà tret que es configuri, de manera\n"
+"que no hi ha problema per instal·lar-lo en ordinadors que no el necessiten."
#
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Checking your system..."
-msgstr "S'està comprovant el vostre sistema..."
-
-#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Restarting CUPS..."
-msgstr "Reinicia l'XFS"
+msgid "Choose your country"
+msgstr "Escolliu el vostre país"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
+msgid ""
+"\n"
+"- System Files:\n"
msgstr ""
+"\n"
+"- Fitxers de sistema:\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr ""
+msgid "Standalone Tools"
+msgstr "Eines autònomes"
#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "El model és correcte"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Where"
+msgstr "On"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Server IP missing!"
-msgstr "Falta el nom del Servidor NCP!"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "but not matching"
+msgstr "però que no coincideixin amb"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "If no port is given, 631 will be taken as default."
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
msgstr ""
+"Aquí podeu seleccionar un controlador alternatiu (tant OSS com ALSA) per ala "
+"targeta de so (%s)"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr ""
+msgid "Configuring PCMCIA cards..."
+msgstr "S'estan configurant les targetes PCMCIA..."
-#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Impressora en servidor CUPS remot"
+#: ../../common.pm:1
+#, c-format
+msgid "kdesu missing"
+msgstr "El kdesu no hi és"
-#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected server"
-msgstr "Elimina la selecció"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Encryption key"
+msgstr "Clau de xifratge"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Edit selected server"
-msgstr "s'ha detectat %s"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Add server"
-msgstr "Afegeix un usuari"
+#: ../../lang.pm:1
+#, c-format
+msgid "Christmas Island"
+msgstr "Illa Christmas"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
+msgid "Installation of bootloader failed. The following error occured:"
msgstr ""
+"Ha fallat la instal·lació del carregador de l'arrencada. S'ha produït "
+"l'error següent:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "IP address of host/network:"
-msgstr ""
+msgid "EIDE/SCSI channel"
+msgstr "Canal EIDE/SCSI"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
+msgid "Set this printer as the default"
+msgstr "Fes que aquesta sigui la impressora predeterminada"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr ""
+msgid "partition %s"
+msgstr "partició %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Host/network IP address missing."
-msgstr ""
+msgid "Paranoid"
+msgstr "Paranoic"
-#: ../../printer/printerdrake.pm:1
+#
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr ""
+msgid "NIS"
+msgstr "NIS"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Sharing of local printers"
-msgstr "Impressores disponibles"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "<-- Del User"
+msgstr "<-- Suprimeix un usuari"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Location on the bus"
+msgstr "Ubicació en el bus"
#
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected host/network"
-msgstr "Elimina la selecció"
+#, c-format
+msgid "No printer found!"
+msgstr "No s'ha trobat cap impressora!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Edit selected host/network"
-msgstr ""
+msgid "the vendor name of the device"
+msgstr "el nom del venedor del dispositiu"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Add host/network"
-msgstr ""
+msgid "Erase entire disk"
+msgstr "Esborra tot el disc"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
+msgid " (Default)"
+msgstr " (Predeterminat)"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
msgstr ""
#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "Configuració automàtica de CUPS"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-
-#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Japanese text printing mode"
-msgstr "Modifica el sistema d'impressió"
+msgid "Automatic reconfiguration"
+msgstr "Reconfiguració automàtica"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
+msgid "Receiving Speed:"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "None"
-msgstr "Fet"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Additional CUPS servers: "
-msgstr "en servidor CUPS \"%s\""
+#: ../../lang.pm:1
+#, c-format
+msgid "Turks and Caicos Islands"
+msgstr "Illes Turks i Caicos"
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "No remote machines"
-msgstr "(en aquest ordinador)"
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "permissions"
+msgstr "permisos"
-#
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Custom configuration"
-msgstr "Configuració de l'avís"
+#, c-format
+msgid "<- Previous"
+msgstr "<- Anterior"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Compartició de fitxers"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Internet Connection Sharing configuration"
+msgstr "Configuració de la compartició de la connexió a Internet"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr ""
+msgid "Toggle between flat and group sorted"
+msgstr "Commuta entre pla i ordenat per grups"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr ""
+msgid "Themes"
+msgstr "Temes"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
+msgid "Options: %s"
+msgstr "Opcions: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
+"Actualment utilitzeu %s com a gestor de l'arrencada\n"
+"Feu clic a 'Configura' per executar l'auxiliar de configuració."
#
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "CUPS printer configuration"
+#, c-format
+msgid "OKI winprinter configuration"
msgstr "Configuració de la \"winprinter\" OKI"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
-msgstr "Detecció automàtica de la impressora (local, TCP/Socket i SMB)"
+msgid "Saint Helena"
+msgstr "Saint Helena"
#
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
+msgid "Security Level"
+msgstr "Nivell de seguretat:"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
msgid ""
+"Some steps are not completed.\n"
"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
msgstr ""
+"Alguns passos no s'han completat.\n"
"\n"
-"Amb un servidor CUPS remot, aquí no us cal configurar cap\n"
-"impressora; les impressores es detectaran automàticament."
+"Segur que voleu sortir ara?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "How is the printer connected?"
-msgstr "Com està connectada la impressora?"
+msgid "Sudan"
+msgstr "Sudan"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Select Printer Connection"
-msgstr "Seleccioneu la connexió de la impressora"
+msgid "Polish (qwertz layout)"
+msgstr "Polonès (disposició qwertz)"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Syria"
+msgstr "Surinam"
-#: ../../security/help.pm:1
+# NOTE: this message will be displayed at boot time; that is
+# only the ascii charset will be available on most machines
+# so use only 7bit for this message (and do transliteration or
+# leave it in English, as it is the best for your language)
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
#, c-format
msgid ""
-"Arguments: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
"\n"
-"Set the user umask."
-msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (val)\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
"\n"
-"Set the shell timeout. A value of zero means no timeout."
msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (size)\n"
+"Benvingut al %s, el selector de sistema operatiu!\n"
+"\n"
+"Trieu un sistema operatiu de la lista superior, o espereu\n"
+"%d segons per arrencar en el sistema operatiu predeterminat.\n"
"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr ""
+msgid "Portuguese"
+msgstr "Portuguès"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check open ports."
-msgstr ""
+msgid "Loopback file name: "
+msgstr "Nom del fitxer de loopback: "
-#: ../../security/help.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "L'adreça del servidor DNS ha d'estar en format 1.2.3.4"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Serbia"
+msgstr "sèrie"
+
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr ""
+msgid "Newzealand"
+msgstr "Nova Zelanda"
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
+msgid "This directory should remain within the root filesystem"
+msgstr "Aquest directori s'ha de mantenir dins del sistema de fitxers arrel"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr ""
+msgid "CapsLock key"
+msgstr "Tecla de Fixació de Majúscules"
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr ""
+msgid "Install bootloader"
+msgstr "Instal·la el carregador de l'arrencada"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
+msgid "Select the memory size of your graphics card"
+msgstr "Seleccioneu la mida de la memòria de la vostra targeta gràfica"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, run chkrootkit checks."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
+msgid "Dynamic IP Address Pool:"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr ""
+msgid "LVM name?"
+msgstr "Nom LVM?"
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr ""
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
+msgstr "S'han suprimit alguns dispositius en la classe \"%s\" de maquinari:\n"
-#: ../../security/help.pm:1
+# #msgid "Found %s %s interfaces"
+# #msgstr "S'han trobat interfícies %2$s %1$s"
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
-msgstr ""
+msgid "Found %s %s interfaces"
+msgstr "S'han trobat interfícies %s %s"
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr ""
+msgid "sticky-bit"
+msgstr "sticky-bit"
-#: ../../security/help.pm:1
+#
+#: ../../standalone/drakfont:1
#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr ""
+msgid "Post Install"
+msgstr "Post-instal·lació"
-#: ../../security/help.pm:1
+#
+#: ../../standalone/drakgw:1
#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr ""
+msgid "The internal domain name"
+msgstr "Nom intern de domini"
-#: ../../security/help.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "if set to yes, report unowned files."
-msgstr ""
+msgid "Card IRQ"
+msgstr "IRQ de la targeta"
#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (umask)\n"
"\n"
-"Set the root umask."
+"Set the user umask."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
-"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
-msgstr ""
+msgid "logdrake"
+msgstr "logdrake"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
+msgid "Choose the floppy drive you want to use to make the bootdisk"
msgstr ""
+"Escolliu la unitat de disquet que voleu utilitzar per crear el disc "
+"d'arrencada"
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
+msgid "LILO with text menu"
+msgstr "LILO amb menú de text"
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
-msgstr ""
+msgid "Everything (no firewall)"
+msgstr "Tot (sense tallafoc)"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
-msgstr ""
+msgid "You must specify a kernel image"
+msgstr "Heu d'especificar una imatge del nucli"
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
-msgstr ""
+msgid ", multi-function device on USB"
+msgstr ", dispositiu multifunció en USB"
-#: ../../security/help.pm:1
+#: ../../interactive/newt.pm:1
+#, fuzzy, c-format
+msgid "Do"
+msgstr "Baixa"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
+msgid "Contacting the mirror to get the list of available packages..."
msgstr ""
+"S'està contactant amb la rèplica per obtenir la llista dels paquets "
+"disponibles..."
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
-msgstr ""
+msgid "Lithuanian AZERTY (old)"
+msgstr "Lituà AZERTY (antic)"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
+msgid "Brazilian (ABNT-2)"
+msgstr "Brasiler (ABNT-2)"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
+msgid "IP address of host/network:"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
+"coordenada y de la cantonada superior\n"
+"esquerra de la barra de progrés"
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
+#, fuzzy, c-format
+msgid "System installation"
+msgstr "Instal·lació del SILO"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
-msgstr ""
+msgid "Saint Vincent and the Grenadines"
+msgstr "Saint Vincent i les Grenadines"
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
-msgstr ""
+msgid "/File/_Open"
+msgstr "/Fitxer/_Obre"
#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
+"The argument specifies if clients are authorized to connect\n"
+"to the X server on the tcp port 6000 or not."
msgstr ""
-#: ../../security/help.pm:1
+#
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Location of auto_install.cfg file"
+msgstr "S'està creant el disquet d'instal·lació automàtica"
+
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
-msgstr ""
+msgid "Open Firmware Delay"
+msgstr "Demora per al firmware obert"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
-msgstr ""
+msgid "Hungary"
+msgstr "Hongria"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"The argument specifies if clients are authorized to connect\n"
-"to the X server on the tcp port 6000 or not."
-msgstr ""
+msgid "Total progess"
+msgstr "Progrés total"
-#: ../../security/help.pm:1
+#
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Color configuration"
+msgstr "Configuració de l'avís"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
-msgstr ""
+msgid "New Zealand"
+msgstr "Nova Zelanda"
-#: ../../security/help.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
msgstr ""
+"Hi ha ja algunes restriccions, i a la nit es fan més comprovacions "
+"automàtiques."
-#: ../../security/help.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
+msgid "please choose the date to restore"
+msgstr "Si us plau, seleccioneu la data a restaurar"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-msgstr ""
+msgid "Switching from ext2 to ext3"
+msgstr "S'està canviant de ext2 a ext3"
-#: ../../security/help.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
+msgid "LPRng"
+msgstr "LPRng"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
+msgid "Netherlands Antilles"
+msgstr "Antilles Holandeses"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
-msgstr ""
+msgid "Browse to new restore repository."
+msgstr "Navega per trobar un nou dipòsit de restauració"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
"\n"
-" Accept/Refuse icmp echo."
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
"\n"
-" Accept/Refuse broadcasted icmp echo."
+"Benvingut a l'auxiliar de configuració de la impressora\n"
+"\n"
+"Aquest auxiliar us permetrà instal·lar impressores locals o remotes per usar-"
+"les en aquest ordinador i també des d'altres ordinadors de la xarxa.\n"
+"\n"
+"Us demanarà la informació necessària per definir impressores i us "
+"proporcionarà accés als controladors disponibles de les impressores, les "
+"seves opcions i els tipus de connexions d'impressores."
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "and %d unknown printers"
msgstr ""
+"\n"
+"i %d impressores desconegudes estan "
-#: ../../security/help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Accept/Refuse bogus IPv4 error messages."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
msgstr ""
-#: ../../security/level.pm:1
-#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "Administrador de seguretat (login o email)"
-
-#: ../../security/level.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
+msgid "No ISDN PCI card found. Please select one on the next screen."
msgstr ""
-"Una llibreria que defensa contra els atacs de 'buffer overflow' i de 'format "
-"string'."
+"No s'ha trobat cap targeta PCI XDSI. Si us plau, seleccioneu-ne una a la "
+"pantalla següent."
-#
-#: ../../security/level.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Use libsafe for servers"
-msgstr "Empra libsafe per als servidors"
+msgid "GB"
+msgstr "GB"
-#
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Security level"
-msgstr "Nivell de seguretat"
+msgid "Please give a user name"
+msgstr "Si us plau, introduïu un nom d'usuari"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Please choose the desired security level"
-msgstr "Escolliu el nivell de seguretat desitjat"
+msgid "Enable CD Boot?"
+msgstr "Voleu habilitar l'arrencada des de CD?"
-#: ../../security/level.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "DrakSec Basic Options"
-msgstr "Opcions bàsiques del DrakSec"
+msgid " enter `void' for void entry"
+msgstr " entreu 'void' per entrada buida"
-#
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Aquest és similar al nivell anterior, però el sistema està completament "
-"tancat i les característiques de seguretat estan al màxim."
+msgid "on Hard Drive"
+msgstr "en el disc dur"
-#
-#: ../../security/level.pm:1
-#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"Amb aquest nivell de seguretat, la utilització d'aquest sistema com a "
-"servidor esdevé possible.\n"
-"La seguretat és ara prou alta com per utilitzar el sistema com a servidor\n"
-"que accepti connexions de molts clients. Nota: si la vostra màquina és només "
-"un client d'Internet, seria millor escollir un nivell més baix."
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Winmodem connection"
+msgstr "Connexió normal per mòdem"
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
+"\n"
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
msgstr ""
-"Hi ha ja algunes restriccions, i a la nit es fan més comprovacions "
-"automàtiques."
+"\n"
+"Felicitats, la impressora s'ha instal·lat i configurat correctament!\n"
+"\n"
+"Podeu imprimir utilitzant l'ordre \"Imprimeix\" de les aplicacions "
+"(normalment en el menú \"Fitxer\").\n"
+"\n"
+"Si voleu afegir, esborrar o canviar el nom a una impressora, o si voleu "
+"canviar les opcions per defecte (safata d'entrada, qualitat impressió...), "
+"seleccioneu \"Impressora\" en la secció \"Maquinari\" del Centre de Control "
+"Mandrake."
-#
-#: ../../security/level.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
+"Arguments: (arg)\n"
+"\n"
+"Set the password history length to prevent password reuse."
msgstr ""
-"Aquesta és la seguretat estàndard recomanada per a un ordinador que "
-"s'utilitzarà per connectar-se a Internet com a client. Ara hi ha "
-"comprovacions de seguretat."
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Ara, la contrasenya està habilitada, però l'ús com a ordinador de xarxa "
-"segueix sense ser recomanable."
+msgid "Now, you can run xawtv (under X Window!) !\n"
+msgstr "Ara, podeu executar xawtv (sota X Window!) !\n"
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
+msgid "Not enough swap space to fulfill installation, please add some"
msgstr ""
-"Aquest nivell s'ha d'utilitzar amb cura. Fa el vostre sistema molt més "
-"fàcil\n"
-"d'utilitzar, però també molt sensible: no s'ha d'utilitzar en un ordinador\n"
-"connectat a d'altres o a Internet. No cal contrasenya per accedir-hi."
+"No hi ha prou espai d'intercanvi per completar la instal·lació; si us plau, "
+"afegiu-ne"
-#: ../../security/level.pm:1
-#, c-format
-msgid "Paranoid"
-msgstr "Paranoic"
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "%s on %s"
+msgstr "Port"
-#
-#: ../../security/level.pm:1
-#, c-format
-msgid "Higher"
-msgstr "Més Alt"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
+"El GNU/Linux gestiona el temps en GMT (Greenwich Mean Time) i el tradueix a\n"
+"temps local d'acord amb el fus horari seleccionat. De tota manera és "
+"possible\n"
+"desactivar-ho desmarcant \"Rellotge del maquinari en GMT\" de manera que el\n"
+"rellotge de la màquina és el mateix que el rellotge del sistema. Això és\n"
+"convenient quan la màquina també té instal·lat un altre sistema operatiu "
+"com \n"
+"Windows.\n"
+"\n"
+"L'opció de \"Sincronització automàtica de l'hora\" regularà automàticament\n"
+"l'hora connectant-se a un servidor horari remot d'Internet. En la llista\n"
+"que es presenta, escolliu un servidor ubicat a prop vostre. Necessiteu una\n"
+"connexió a Internet operativa perquè aquesta característica funcioni. El "
+"que\n"
+"farà realment és instal·lar en la vostra màquina un servidor horari, que "
+"poden\n"
+"usar opcionalment els altres ordinadors de la xarxa local."
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "High"
-msgstr "Alt"
+msgid "Which is your timezone?"
+msgstr "En quina zona horària us trobeu?"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Poor"
-msgstr "Pobre"
+msgid "Guinea"
+msgstr "Guinea"
-#: ../../security/level.pm:1
-#, c-format
-msgid "Welcome To Crackers"
-msgstr "Benvinguts, crackers"
+#: ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "The system is now connected to the Internet."
+msgstr "Ara, el sistema està connectat a Internet."
-#: ../../standalone/XFdrake:1
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Si us plau, torneu a entrar a %s per activar els canvis"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "South Georgia and the South Sandwich Islands"
+msgstr "Illes Geòrgia del Sud i Sandwich del Sud"
-#: ../../standalone/XFdrake:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Si us plau, sortiu i utilitzeu Ctrl-Alt-tecla de retrocés"
+msgid "Japan (broadcast)"
+msgstr "Japó (difusió)"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
-msgstr ""
+msgid "Mozambique"
+msgstr "Moçambic"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "Abans cal crear /etc/dhcpd.conf!"
+msgid "Icon"
+msgstr "Icona"
-#: ../../standalone/drakTermServ:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "Alguna cosa ha anat malament! Teniu instal·lat l'mkisofs?"
+msgid "Please choose what you want to backup"
+msgstr "Si us plau, escolliu de què voleu fer la còpia de seguretat"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr "La imatge ISO per a Etherboot és %s"
+msgid "256 colors (8 bits)"
+msgstr "256 colors (8 bits)"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "No floppy drive available!"
-msgstr "No s'ha trobat cap unitat de disquet!"
+msgid "Read-write"
+msgstr "Lectura-escriptura"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Floppy can be removed now"
-msgstr "Ja podeu extreure el disquet"
+msgid "Size: %s\n"
+msgstr "Mida: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Couldn't access the floppy!"
-msgstr "No s'ha pogut accedir al disquet!"
+msgid "Hostname: "
+msgstr "Nom de l'ordinador central: "
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please insert floppy disk:"
-msgstr "Si us plau, inseriu un disquet:"
+msgid "Chunk size %s\n"
+msgstr "Mida del fragment %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Write Config"
-msgstr "Escriu la configuració"
+msgid "Build the future of Linux!"
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr ""
+msgid "Local Printer"
+msgstr "Impressora local"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
msgstr ""
-"La majoria d'aquests valors s'han obtingut\n"
-"del vostre sistema actual. Podeu modificar-los si cal."
-
-#
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "Configuració del servidor dhcpd"
+" Copyright (C) 2001 MandrakeSoft per DUPONT Sebastien <dupont_s\\@epita.fr>"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "IP Range End:"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "IP Range Start:"
-msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Name Servers:"
-msgstr "Servidor Samba"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Domain Name:"
-msgstr "Nom de domini"
+msgid "ADSL connection"
+msgstr "Connexió ADSL"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Broadcast Address:"
-msgstr ""
+msgid "No configuration, please click Wizard or Advanced.\n"
+msgstr "Cap configuració, si us plau feu clic a 'Auxiliar' o a 'Avançat'.\n"
-#: ../../standalone/drakTermServ:1
+#
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Subnet Mask:"
-msgstr ""
+msgid "Error!"
+msgstr "S'ha produït un error!"
-#: ../../standalone/drakTermServ:1
+#
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Routers:"
-msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Netmask:"
-msgstr "Submàscara de xarxa"
+msgid "cable connection detected"
+msgstr "s'ha detectat la connexió per cable"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Subnet:"
-msgstr ""
+msgid "Permission denied transferring %s to %s"
+msgstr "S'ha denegat el permís per transferir %s a %s"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
-msgstr ""
+msgid "/_Report Bug"
+msgstr "/_Informeu d'un error"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "dhcpd Config..."
-msgstr "Configuració del dhcpd..."
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Delete Client"
-msgstr "<-- Suprimeix un client"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "<-- Edit Client"
-msgstr "<-- Suprimeix un client"
+msgid "Resize"
+msgstr "Canvia la mida"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add Client -->"
-msgstr "Afegeix un client -->"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Allow Thin Clients"
-msgstr "Afegeix/Suprimeix clients"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Thin Client"
-msgstr "Client DHCP"
+msgid "Dominica"
+msgstr "Dominica"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No net boot images created!"
-msgstr "No s'ha creat cap imatge d'arrencada des de xarxa"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "type: %s"
-msgstr "Tipus: "
+msgid "Please enter the device name to use for backup"
+msgstr ""
+"Si us plau, introduïu el nom del dispositiu a utilitzar per fer la còpia"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "<-- Del User"
-msgstr "<-- Suprimeix un usuari"
+msgid "Resolution: %s\n"
+msgstr "Resolució: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Add User -->"
-msgstr "Afegeix un usuari -->"
+msgid "matching"
+msgstr "que coincideixin amb"
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
#, c-format
msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
msgstr ""
+"No es pot accedir als mòduls del nucli corresponents al vostre nucli (no "
+"s'ha trobat el fitxer %s). Això generalment vol dir que el vostre disquet "
+"d'arrencada no està sincronitzat amb el suport d'instal·lació (si us plau, "
+"creeu un nou disquet d'arrencada)"
-#
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Delete All NBIs"
-msgstr "Suprimeix tots els NBI"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "<-- Delete"
-msgstr "<-- Suprimeix"
-
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
-msgid "This will take a few minutes."
-msgstr "Això trigarà uns minuts."
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"Si us plau, seleccioneu el port correcte. Per exemple, el port \"COM1\" en\n"
+"Windows s'anomena \"ttyS0\" en GNU/Linux."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Build All Kernels -->"
-msgstr "Munta tots els nuclis -->"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "No NIC selected!"
-msgstr "No heu seleccionat cap NIC!"
+msgid "The following packages are going to be removed"
+msgstr "Ara s'eliminaran els paquets següents"
-#: ../../standalone/drakTermServ:1
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
#, c-format
-msgid "Build Single NIC -->"
-msgstr "Munta un NIC senzill -->"
+msgid "Connect to the Internet"
+msgstr "Connecta't a Internet"
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "No kernel selected!"
-msgstr "No heu seleccionat cap nucli!"
+msgid "Use existing partitions"
+msgstr "Utilitza les particions existents"
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Build Whole Kernel -->"
-msgstr "Munta tot el nucli -->"
+msgid "Canadian (Quebec)"
+msgstr "Canadenc (Quebec)"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Boot ISO"
-msgstr "ISO d'arrencada"
+msgid "Mouse device: %s\n"
+msgstr "Dispositiu del ratolí: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Boot Floppy"
-msgstr "Disquet d'arrencada"
+msgid "Reselect correct fonts"
+msgstr "Torna a seleccionar les fonts correctes"
-#: ../../standalone/drakTermServ:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
+"Options Description:\n"
"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
-"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
"\n"
msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-"\n"
+"descripció de les opcions:\n"
"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"Si us plau, aneu amb compte quan feu còpies de seguretat amb FTP, \n"
+"perquè només s'envien al servidor les còpies creades correctament.\n"
+"Per tant, ara necessiteu construir la còpia de seguretat en el vostre disc \n"
+"dur abans d'enviar-la al servidor.\n"
"\n"
-msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
+"Options\n"
"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
-" actualitzacions 2002 MandrakeSoft per Stew Benedict <sbenedict"
-"\\@mandrakesoft.com>"
+"Finalment, se us demanarà si voleu veure una interfície gràfica en "
+"arrencar.\n"
+"Noteu que aquesta pregunta se us farà encara que no hàgiu fet el test de la\n"
+"configuració. Òbviament, respondreu \"No\" si l'ordinador ha de ser un\n"
+"servidor, o si no heu pogut completar la configuració de la pantalla amb "
+"èxit."
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Add/Del Clients"
-msgstr "Afegeix/Suprimeix clients"
+msgid "We are now going to configure the %s connection."
+msgstr "Ara es configurarà la connexió %s."
-#: ../../standalone/drakTermServ:1
+#
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Add/Del Users"
-msgstr "Afegeix/Suprimeix usuaris"
+msgid "MandrakeExpert Corporate"
+msgstr "Grup corporatiu MandrakeExpert"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Net Boot Images"
-msgstr "Imatges d'arrencada de la xarxa"
+msgid ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Write protection"
+msgstr "Detecció automàtica d'impressores"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "You've not selected any font"
+msgstr "no s'ha trobat cap font.\n"
+
+#: ../../steps.pm:1
#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "Disquet/ISO per a Etherboot"
+msgid "Language"
+msgstr "Escolliu el vostre idioma"
-#: ../../standalone/drakTermServ:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Stop Server"
-msgstr "Atura el servidor"
+msgid "Printer model selection"
+msgstr "Selecció del model d'impressora"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Start Server"
-msgstr "Inicia el servidor"
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
+msgstr ""
+"Després de canviar el tipus de la partició %s, se'n perdran totes les dades"
-#
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
#, c-format
-msgid "Disable Server"
-msgstr "Inhabilita el servidor"
+msgid "%d seconds"
+msgstr "%d segons"
-#
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Enable Server"
-msgstr "Habilita el servidor"
+msgid "Insert a blank floppy in drive %s"
+msgstr "Inseriu un disquet en blanc a la unitat %s"
-#
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "Configuració del Servidor de Terminal de Mandrake"
+msgid "A valid URI must be entered!"
+msgstr "Heu d'entrar un URI vàlid!"
-#
-#: ../../standalone/drakautoinst:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Remove the last item"
-msgstr "Esborra l'últim element"
+msgid "Found \"%s\" interface do you want to use it ?"
+msgstr "S'ha trobat la interfície \"%s\". Voleu utilitzar-la?"
-#
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Add an item"
-msgstr "Afegeix un element"
+msgid "Re-configure interface and DHCP server"
+msgstr "Torna a configurar la interfície i el servidor DHCP"
#
-#: ../../standalone/drakautoinst:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Auto Install"
-msgstr "Instal·la automàticament"
+msgid "Sound configuration"
+msgstr "Configuració de so"
-#: ../../standalone/drakautoinst:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"El disquet s'ha creat correctament.\n"
-"Ara podeu repetir la vostra instal·lació."
+msgid "Photo test page"
+msgstr "Pàgina de prova de fotografia"
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Congratulations!"
-msgstr "Felicitats!"
+msgid "Custom disk partitioning"
+msgstr "Particionament personalitzat de disc"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Enter Printer Name and Comments"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
+"The following printers\n"
"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
"\n"
-"Benvingut.\n"
-"\n"
-"Els paràmetres de la instal·lació automàtica estan disponibles en les "
-"seccions de l'esquerra"
+"Hi ha una impressora desconeguda connectada directament a l'ordinador."
-#
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "type: %s"
+msgstr "Tipus: "
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "Creating auto install floppy"
-msgstr "S'està creant el disquet d'instal·lació automàtica"
+msgid "Slovakian (QWERTY)"
+msgstr "Eslovac (QWERTY)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "manual"
-msgstr ""
+msgid "No Sound Card detected!"
+msgstr "No s'ha detectat cap targeta de so!"
-#: ../../standalone/drakautoinst:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#, c-format
+msgid "Mouse Port"
+msgstr "Port del ratolí"
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
msgstr ""
-"Si us plau, escolliu per cada pas si es repetirà la vostra instal·lació o si "
-"serà manual"
-#
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Configuració automatitzada dels passos"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "replay"
-msgstr "Repeteix"
+msgid "Ftp Server"
+msgstr "Servidor FTP"
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+"Arguments: (arg)\n"
"\n"
-"Do you want to continue?"
+"Enable/Disable msec hourly security check."
msgstr ""
-"Ara es configurarà un disquet d'instal·lació automàtica. Aquesta "
-"característica és perillosa i s'ha d'utilitzar amb molta cura.\n"
-"\n"
-"Amb aquesta característica, sereu capaç de repetir la instal·lació que ja "
-"heu fet en aquest ordinador, tot i que se us consultarà en alguns passos, "
-"perquè pugueu canviar els valors.\n"
-"\n"
-"Per màxima seguretat, el particionament i la formatació mai seran executats "
-"automàticament, independentment del que trieu durant la instal·lació "
-"d'aquest ordinador.\n"
-"\n"
-"Voleu continuar?"
-#
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "Configuració de la instal·lació automàtica"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "%s fonts conversion"
+msgstr "conversió de fonts pfm"
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "No he trobat el fitxer d'imatge necessari `%s'."
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the type of bus on which the mouse is connected"
+msgstr "Si us plau, seleccioneu el port sèrie a què està connectat el ratolí."
-#
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
#, c-format
-msgid "Error!"
-msgstr "S'ha produït un error!"
+msgid "Uganda"
+msgstr "Uganda"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (size)\n"
"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
+"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
-"\n"
-"Problemes durant la restauració de còpies de seguretat:\n"
-"\n"
-"Durant el pas de restauració, el Drakbackup verificarà tots\n"
-"els fitxers de les còpies de seguretat abans de restaurar-los.\n"
-"Abans de la restauració, el Drakbackup esborrarà \n"
-"els directoris originals, i perdreu totes les vostres \n"
-"dades. És important de tenir cura i no modificar a mà els \n"
-"fitxers de còpia de seguretat.\n"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"options description:\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
"\n"
-msgstr ""
-"descripció de les opcions:\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
"\n"
-"Si us plau, aneu amb compte quan feu còpies de seguretat amb FTP, \n"
-"perquè només s'envien al servidor les còpies creades correctament.\n"
-"Per tant, ara necessiteu construir la còpia de seguretat en el vostre disc \n"
-"dur abans d'enviar-la al servidor.\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
"\n"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"Description:\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
+"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
msgstr ""
-"Descripció:\n"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Comoros"
+msgstr "Comores"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid ""
"\n"
-" El Drakbackup s'usa per fer còpies de seguretat del sistema.\n"
-" Durant la configuració podeu seleccionar: \n"
-"\t- Fitxers de sistema\n"
-"\t- Fitxers d'usuari\n"
-"\t- Altres fitxers\n"
-"\to Tot el Sistema... i Altres (com les Particions de Windows)\n"
"\n"
-" El Drakbackup us permet fer còpies de seguretat del sistema en:\n"
-"\t- Disc dur\n"
-"\t- NFS\n"
-"\t- CDROM (CDRW), DVDROM (amb arrencada automàtica, rescat i instal·lació "
-"automàtica)\n"
-"\t- FTP\n"
-"\t- Rsync\n"
-"\t- Webdav\n"
-"\t- Cinta\n"
"\n"
-" El Drakbackup us permet restaurar el sistema a\n"
-" un directori seleccionat d'usuari.\n"
+"We are now going to configure the %s connection.\n"
"\n"
-" Per defecte totes les còpies de seguretat es guarden en\n"
-" el directori /var/lib/drakbackup\n"
"\n"
-" Fitxer de Configuració:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"Press OK to continue."
+msgstr ""
"\n"
"\n"
-"El pas de restauració:\n"
-" \n"
-" Durant el pas de restauració, el DrakBackup esborrarà \n"
-" els directoris originals i verificarà que cap de \n"
-" les còpies de seguretat no està malmesa. És recomanable que \n"
-" feu una última còpia de seguretat abans de restaurar.\n"
+"\n"
+"Ara es configurarà la connexió %s.\n"
"\n"
"\n"
+"Premeu D'acord per continuar."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
-msgstr ""
-" actualitzacions 2002 MandrakeSoft per Stew Benedict <sbenedict"
-"\\@mandrakesoft.com>"
+msgid "Yaboot mode"
+msgstr "Mode Yaboot"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
+msgstr "EUA (cable)"
+
+#: ../../standalone/drakboot:1
+#, c-format
msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
-" Copyright (C) 2001 MandrakeSoft per DUPONT Sebastien <dupont_s\\@epita.fr>"
+"No s'ha pogut tornar a executar LILO!\n"
+"Executa \"lilo\" com a root a la línia d'ordres per completar la "
+"instal·lació del tema del LILO."
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Ratolí genèric de 3 botons"
+#
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Select another media to restore from"
+msgstr "Seleccioneu un altre suport des del qual restaurar"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Software Manager"
+msgstr "Gestor de programari"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"restore description:\n"
+"Restore Description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
@@ -14342,17 +13787,19 @@ msgid ""
"\n"
" - Incremental Backups:\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
msgstr ""
"descripció de la restauració:\n"
@@ -14379,4774 +13826,5404 @@ msgstr ""
"\n"
"\n"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-"descripció de les opcions:\n"
-"\n"
-" - Còpia de seguretat dels fitxers de sistema:\n"
-" \n"
-"\tAquesta opció us permet fer còpies del directori /etc,\n"
-"\tque conté tots els fitxers de configuració. Tingueu\n"
-"\tcura durant el pas de restauració de no sobreescriure:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Còpia de seguretat dels fitxers d'usuari: \n"
-"\n"
-"\tAquesta opció permet seleccionar els usuaris dels quals voleu \n"
-"\tfer còpia de seguretat.\n"
-"\tPer preservar espai de disc, es recomanable que no inclogueu \n"
-"\tla memòria cau del navegador.\n"
-"\n"
-" - Còpia de seguretat d'altres fitxers: \n"
-"\n"
-"\tAquesta opció us permet afegir més dades per desar.\n"
-"\tAmb aquesta opció de còpia encara no és possible activar\n"
-"\tl'opció de còpia incremental.\t\t\n"
-" \n"
-" - Còpia de seguretat incremental:\n"
-"\n"
-"\tLa còpia incremental és l'opció més potent a l'hora de fer \n"
-"\tcòpies de seguretat. Aquesta opció us permet fer una còpia \n"
-"\tde seguretat de totes les dades la primera vegada, i \n"
-"\tnomés de les dades canviades després.\n"
-"\tMés tard, sereu capaç, durant el procés de restauració, \n"
-"\tde restaurar les dades d'una data determinada.\n"
-"\tSi no s'activa aquesta opció totes les còpies de \n"
-"\tseguretat antigues s'esborren abans de cada nova còpia. \n"
-"\n"
-"\n"
+msgid "Re-submit"
+msgstr "Torna a enviar"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Alguns errors durant el procés de sendmail són causats per \n"
-" una configuració dolenta de postfix. Per resoldre-ho hauríeu de\n"
-" definir myhostname o mydomain en /etc/postfix/main.cf\n"
-"\n"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-"descripció de les opcions:\n"
-"\n"
-" En aquest pas, el Drakbackup us permet modificar:\n"
-"\n"
-" - El mode de compressió:\n"
-" \n"
-" Si seleccioneu compressió bzip2, comprimireu\n"
-" les dades millor que amb gzip (una millora entre 2-10 %).\n"
-" Aquesta opció no està activada per defecte perquè\n"
-" necessita molt més temps (deu vegades més).\n"
-" \n"
-" - El mode d'actualització:\n"
-"\n"
-" Aquesta opció us permet actualitzar una còpia de seguretat,\n"
-" però no és gaire útil perquè s'han de descomprimir les\n"
-" dades copiades abans de poder-les actualitzar.\n"
-" \n"
-" - El mode .backupignore:\n"
-"\n"
-" Igual que el cvs, el Drakbackup ignorarà totes les referències\n"
-" incloses en els fitxers .backupignore de cada directori.\n"
-" P.ex.: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
+msgid "CD in place - continue."
+msgstr "El CD és a lloc. Continua."
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Drakbackup"
-msgstr "Drakbackup"
+msgid "KB"
+msgstr "kB"
-#
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Restore"
-msgstr "Restaura"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Network & Internet"
+msgstr "Interfície de la xarxa"
-#
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup Now"
-msgstr "Fes la còpia de seguretat"
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Lituà \"fonètic\" QWERTY"
-#
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Advanced Configuration"
-msgstr "Configuració avançada"
+msgid "Net Boot Images"
+msgstr "Imatges d'arrencada de la xarxa"
-#
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Wizard Configuration"
-msgstr "Auxiliar de configuració"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Sharing of local scanners"
+msgstr "Impressores disponibles"
-#
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "View Backup Configuration."
-msgstr "Visualitza la configuració de la còpia de seguretat"
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr "L'exploració Plug'n'Play ha fallat. Especifiqueu un monitor"
-#
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Backup Now from configuration file"
-msgstr "Fes la còpia de seguretat des del fitxer de configuració"
+msgid "Services and deamons"
+msgstr "Serveis i dimonis"
#
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Drakbackup Configuration"
-msgstr "Configuració del Drakbackup"
+msgid "Remote host name missing!"
+msgstr "Falta el nom de l'ordinador central remot!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Total Progress"
-msgstr "Progrés total"
+msgid "with /usr"
+msgstr "amb /usr"
#
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sending files..."
-msgstr "S'estan enviant els fitxers..."
+msgid "Network"
+msgstr "Xarxa"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "files sending by FTP"
-msgstr "fitxers que s'estan enviant per FTP"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgstr ""
+"Detecta automàticament les impressores connectades a màquines amb Microsoft "
+"Windows"
-#
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup other files"
-msgstr "Còpia de seguretat d'altres fitxers"
+msgid "This password is too simple"
+msgstr "Aquesta contrasenya és massa senzilla"
-#
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup user files"
-msgstr "Còpia de seguretat dels fitxers d'usuari"
+msgid "Slovakian (QWERTZ)"
+msgstr "Eslovac (QWERTZ)"
-#
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "Backup system files"
-msgstr "Còpia de seguretat dels fitxers de sistema"
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Under Devel ... please wait."
-msgstr "Sota desenvolupament ... espereu si us plau."
+msgid "Truly minimal install (especially no urpmi)"
+msgstr "Instal·lació realment mínima (especialment no urpmi)"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+" Transfer \n"
+"Now"
msgstr ""
-"No s'ha trobat el fitxer de configuració \n"
-"si us plau, feu clic a 'Auxiliar' o a 'Avançat'."
+" Transfereix-ho \n"
+"ara"
+#
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please select data to backup..."
-msgstr "Seleccioneu les dades de les quals voleu fer la còpia..."
+msgid "Use daemon"
+msgstr "Utilitza dimoni"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
#, c-format
-msgid "Please select media for backup..."
-msgstr "Si us plau seleccioneu el suport per a la còpia..."
+msgid "Authentication"
+msgstr "Autenticació"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please select data to restore..."
-msgstr "Si us plau, seleccioneu les dades per restaurar..."
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Afegeix aquesta impressora a Star Office/OpenOffice.org/GIMP"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Ara s'instal·laran els paquets següents"
+msgid "Additional CUPS servers: "
+msgstr "en servidor CUPS \"%s\""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
-"S'ha produït un error en enviar el fitxer a través d'FTP.\n"
-" Si us plau, corregiu la configuració de l'FTP."
+"Trieu una de les impressores detectades de la llista, o introduïu el nom de "
+"l'ordinador central o la IP i opcionalment el número de port (per defecte és "
+"el 9100) en els quadres de text."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
-msgstr ""
-"S'ha produït un error en enviar el correu.\n"
-" El vostre informe no ha estat enviat.\n"
-" Si us plau configureu el sendmail"
+msgid "Where do you want to mount %s?"
+msgstr "On voleu muntar %s?"
#
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Next"
-msgstr "Següent"
+msgid "Restore Via Network"
+msgstr "Restaura a través de la xarxa"
-#
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Previous"
-msgstr "Anterior"
+msgid "Algeria"
+msgstr "Algèria"
-#
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Save"
-msgstr "Desa"
+msgid "Initrd-size"
+msgstr "Initrd-size"
-#
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
-msgid "Build Backup"
-msgstr "Construeix la còpia de seguretat"
+msgid ""
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
-#
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore Progress"
-msgstr "Progrés de la restauració"
+msgid "\tBackups use tar and gzip\n"
+msgstr "\tLes còpies de seguretat utilitzen tar i gzip\n"
-#
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Restore From Catalog"
-msgstr "Restaura des de catàleg"
+msgid "2 MB"
+msgstr "2 MB"
-#: ../../standalone/drakbackup:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Browse to new restore repository."
-msgstr "Navega per trobar un nou dipòsit de restauració"
+msgid ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Setting Default Printer..."
+msgstr "Impressora predeterminada"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid "CD in place - continue."
-msgstr "El CD és a lloc. Continua."
+msgid "Interface %s (using module %s)"
+msgstr "Interfície %s (utilitzant el mòdul %s)"
-#
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Custom Restore"
-msgstr "Restauració personalitzada"
+msgid "Name: %s\n"
+msgstr "Nom: %s\n"
-#: ../../standalone/drakbackup:1
+#
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Restore all backups"
-msgstr "Restaura totes les còpies de seguretat"
+msgid "Generating preview ..."
+msgstr "S'està generant la vista prèvia..."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Restore Failed..."
-msgstr "La restauració ha fallat..."
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Files Restored..."
-msgstr "S'han restaurat els fitxers..."
+msgid "serial"
+msgstr "sèrie"
-#: ../../standalone/drakbackup:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Path or Module required"
-msgstr "El camí o el mòdul són necessaris"
+msgid "DVD-ROM"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Hostname required"
-msgstr "El nom de l'ordinador central (host) és necessari"
+msgid "Georgian (\"Latin\" layout)"
+msgstr "Georgià (disposició \"llatina\")"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Username required"
-msgstr "El nom d'usuari és necessari"
+msgid "Get the best items with Mandrake Linux Strategic partners"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Password required"
-msgstr "La contrasenya és necessària"
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
+msgstr ""
+"Ara podeu subministrar les opcions per al mòdul %s.\n"
+"Tingueu en compte que qualsevol adreça s'ha de prefixar amb 0x, com '0x123'"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Host Path or Module"
-msgstr "Camí de l'ordinador central o mòdul"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Host Name"
-msgstr "Nom de l'ordinador central"
+msgid "Kenya"
+msgstr "Kenya"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr "Restaura mitjançant el protocol de xarxa: %s"
+msgid "Use ``Unmount'' first"
+msgstr "Utilitzeu primer \"Unmount\""
#
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Restore Via Network"
-msgstr "Restaura a través de la xarxa"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing mtools packages..."
+msgstr "S'estan instal·lant els paquets..."
-#: ../../standalone/drakbackup:1
+#
+#: ../../any.pm:1
#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr ""
-"L'etiqueta de la cinta no és correcta. L'etiqueta d'aquesta cinta és %s."
+msgid "You must specify a root partition"
+msgstr "Heu d'especificar una partició arrel"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-"Inseriu la cinta amb l'etiqueta de volum %s\n"
-" al dispositiu de cinta %s"
+msgid "first step creation"
+msgstr "creació del primer pas"
-#
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore From Tape"
-msgstr "Restaura des de cinta"
+msgid "Both Shift keys simultaneously"
+msgstr "Les dues tecles de Majúscules simultàniament"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr "L'etiqueta del CD no és correcta. L'etiqueta d'aquest disc és %s."
+#
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Select a scanner model"
+msgstr "Seleccioneu un escàner"
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
-msgstr ""
-"Inseriu el CD amb l'etiqueta de volum %s\n"
-" a la unitat de CD sota el punt de muntatge /mnt/cdrom"
+msgid "LPRng - LPR New Generation"
+msgstr "LPRng - LPR New Generation"
#
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore From CD"
-msgstr "Restaura des de CD"
+msgid "Drakbackup Configuration"
+msgstr "Configuració del Drakbackup"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Backup files not found at %s."
-msgstr "No s'han trobat els fitxers de còpia de seguretat a %s"
+msgid "Save as.."
+msgstr "Anomena i desa..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Change\n"
-"Restore Path"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
msgstr ""
-"Canvia el camí\n"
-"on restaurar"
+"Aquesta interfície encara no s'ha configurat.\n"
+"Executeu l'auxiliar de configuració en la finestra principal"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Korea (North)"
+msgstr ""
+
+#: ../../any.pm:1
+#, c-format
+msgid "Autologin"
+msgstr "Entrada automàtica"
#
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
+#, fuzzy, c-format
+msgid "System configuration"
+msgstr "Configuració de l'avís"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
+msgid "Domain Admin Password"
+msgstr "Contrasenya de l'administrador del domini"
+
+#: ../../share/advertising/05-desktop.pl:1
+#, fuzzy, c-format
msgid ""
-"Restore Selected\n"
-"Files"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
msgstr ""
-"Restaura els fitxers\n"
-"seleccionats"
+"Mandrake Linux 9.1 us proporciona onze interfícies d'usuari totalment "
+"modificables: KDE 3, Gnome 2, WindowMaker..."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Configuring printer ..."
+msgstr "S'està configurant la impressora \"%s\"..."
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
-"Restaura l'entrada\n"
-"del catàleg seleccionada"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Remove user directories before restore."
-msgstr "Esborra els directoris d'usuari abans de restaurar."
+msgid "MB"
+msgstr "MB"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
+msgid "if set to yes, run some checks against the rpm database."
msgstr ""
-"Fes una nova còpia de seguretat abans de restaurar (només per les còpies "
-"incrementals.)"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "select path to restore (instead of /)"
-msgstr "seleccioneu el camí al qual restaurar (en comptes de /)"
+msgid "Virgin Islands (British)"
+msgstr "Illes Verge Britàniques"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore Other"
-msgstr "Restaura altres"
+msgid "Bermuda"
+msgstr "Bermuda"
-#
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Restore Users"
-msgstr "Restaura els usuaris"
+msgid "click here if you are sure."
+msgstr "feu clic aquí si ho teniu clar."
-#
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore system"
-msgstr "Restaura el sistema"
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
+msgstr ""
+"No s'ha trobat el fitxer de configuració \n"
+"si us plau, feu clic a 'Auxiliar' o a 'Avançat'."
-#
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Other Media"
-msgstr "Altres suports"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"Aquestes són les particions de Linux existents que s'han detectat a la\n"
+"vostra unitat de disc dur. Podeu conservar les eleccions fetes per "
+"l'auxiliar, \n"
+"són adequades per a un ús normal. Si feu algun canvi, com a mínim heu de "
+"definir\n"
+"una partició arrel (\"/\"). No escolliu una partició massa petita, o no "
+"podreu\n"
+"instal·lar prou programari. Si voleu emmagatzemar les dades en una altra "
+"partició, també haureu de seleccionar una \"/home\" (només si teniu més "
+"d'una partició de\n"
+"Linux disponible).\n"
+"\n"
+"Per a la vostra informació, cada partició està identificada d'aquesta "
+"manera: \"Nom\", \"Capacitat\".\n"
+"\n"
+"\"Nom\" es compon de: \"tipus d'unitat de disc\", \"número d'unitat de disc"
+"\",\n"
+"\"número de la partició\" (per exemple, \"hda1\").\n"
+"\n"
+"El \"Tipus d'unitat de disc\" és \"hd\" si la vostre unitat de disc és IDE i "
+"\"sd\" si és SCSI.\n"
+"\n"
+"El \"Número de la unitat de disc\" és sempre una lletra després d'\"hd\" o "
+"\"sd\".\n"
+"Amb unitats de disc IDE:\n"
+"\n"
+" * \"a\" significa \"unitat de disc mestra en el controlador IDE primari\",\n"
+"\n"
+" * \"b\" significa \"unitat de disc esclava en el controlador IDE primari"
+"\",\n"
+"\n"
+" * \"c\" significa \"unitat de disc mestra en el controlador IDE secundari"
+"\",\n"
+"\n"
+" * \"d\" significa \"unitat de disc esclava en el controlador IDE secundari"
+"\".\n"
+"\n"
+"Amb les unitats de disc SCSI, una \"a\" significa \"unitat primària de disc"
+"\",\n"
+"una \"b\" significa \"unitat secundària de disc\", etc."
#
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Select another media to restore from"
-msgstr "Seleccioneu un altre suport des del qual restaurar"
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#, fuzzy, c-format
+msgid "Remove"
+msgstr "Esborra la llista"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the directory where backups are stored"
-msgstr "Si us plau, entreu el directori on es guarden les còpies de seguretat"
+msgid "Lesotho"
+msgstr "Lesotho"
-#
-#: ../../standalone/drakbackup:1
+#: ../../ugtk2.pm:1
#, c-format
-msgid "Restore from Hard Disk."
-msgstr "Restaura des del disc dur."
+msgid "utopia 25"
+msgstr ""
-#
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Use quota for backup files."
-msgstr "Usa la quota de disc per als fitxers de còpia de seguretat."
+msgid "Pipe job into a command"
+msgstr "Redirecciona el treball cap a una ordre"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "new dynamic device name generated by core kernel devfs"
+msgstr "nou nom de dispositiu dinàmic generat pel devfs intern del nucli"
+
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Si us plau, especifiqueu la mida màxima\n"
-" permesa per a Drakbackup"
+msgid "Yes"
+msgstr "Sí"
-#
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the directory to save:"
-msgstr "Si us plau, introduïu el directori on voleu desar-ho:"
+msgid "Cote d'Ivoire"
+msgstr "Costa d'Ivori"
-#
-#: ../../standalone/drakbackup:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Use Hard Disk to backup"
-msgstr "Usa el disc dur per fer la còpia de seguretat"
+msgid "Which protocol do you want to use?"
+msgstr "Quin protocol voleu utilitzar?"
#
#: ../../standalone/drakbackup:1
#, c-format
-msgid "please choose the date to restore"
-msgstr "Si us plau, seleccioneu la data a restaurar"
+msgid "Restore Progress"
+msgstr "Progrés de la restauració"
-#
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Backup the system files before:"
-msgstr "Fes primer la còpia de seguretat dels fitxers de sistema:"
+msgid "Estonia"
+msgstr "Estònia"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
+msgid "Choose the host on which the local scanners should be made available:"
msgstr ""
-"Llista d'usuaris per restaurar (només és important la data més recent per "
-"usuari)"
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "OK to restore the other files."
-msgstr "'D'acord' per restaurar els altres fitxers."
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
+msgstr ""
+"Hi ha un forat a la vostra taula de particions, però no puc utilitzar-lo.\n"
+"L'única solució és moure les particions primàries per fer que el forat quedi "
+"contigu a les particions ampliades"
-#
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " Restore Configuration "
-msgstr " Configuració de restauració "
+msgid "Channel"
+msgstr "Canal"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid " Successfuly Restored on %s "
-msgstr " restaurades amb èxit en %s "
+msgid "Add"
+msgstr "Afegeix"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid " All of your selected data have been "
-msgstr " Totes les dades seleccionades han estat "
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "No s'ha configurat mai cap connexió compartida a Internet."
+#
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup files are corrupted"
-msgstr "Els fitxers de la còpia de seguretat estan corromputs"
+msgid " Error while sending mail. \n"
+msgstr " S'ha produït un error en enviar el correu electrònic. \n"
-#
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Si us plau, desseleccioneu-ho o esborreu-ho la pròxima vegada."
+msgid "Keyboard"
+msgstr "Teclat"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"List of data corrupted:\n"
-"\n"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-"Llista de dades corrompudes:\n"
-"\n"
+"Inseriu el CD amb l'etiqueta de volum %s\n"
+" a la unitat de CD sota el punt de muntatge /mnt/cdrom"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"List of data to restore:\n"
-"\n"
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
msgstr ""
-"Llista de dades per restaurar:\n"
-"\n"
-#: ../../standalone/drakbackup:1
+#
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Cap configuració, si us plau feu clic a 'Auxiliar' o a 'Avançat'.\n"
+msgid "Choose the connection you want to configure"
+msgstr "Escolliu la connexió que voleu configurar"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "\t-Network by webdav.\n"
-msgstr "\t-Xarxa per webdav.\n"
+msgid "Please wait, setting security level..."
+msgstr "Espereu si us plau, s'està configurant el nivell de seguretat..."
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t-Xarxa per rsync.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
+msgstr "Mandrake Linux 9.1 és l'últim en plataformes de desenvolupament"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Xarxa per SSH.\n"
+msgid "Configuring network device %s"
+msgstr "S'està configurant el dispositiu de xarxa %s"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Xarxa per FTP.\n"
+#
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "activated"
+msgstr "Activa'l ara"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "\t-Tape \n"
-msgstr "\t-Cinta \n"
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Please choose which network interface will be used for the dhcp server."
+msgstr ""
+"Si us plau, seleccioneu quin adaptador de xarxa voleu utilitzar per\n"
+"connectar-vos a Internet."
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
+msgid "Finding packages to upgrade..."
+msgstr "S'estan cercant els paquets a actualitzar"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t-Disc dur.\n"
+msgid "Mount point: "
+msgstr "Punt de muntatge: "
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
-msgstr ""
-"\n"
-"- Dimoni (%s) inclou:\n"
+msgid "parse all fonts"
+msgstr "analitza totes les fonts"
-#: ../../standalone/drakbackup:1
+#
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tLes còpies de seguretat utilitzen tar i gzip\n"
+msgid "With X"
+msgstr "Amb X"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tLes còpies de seguretat utilitzen tar i bzip2\n"
+msgid "Multi-head configuration"
+msgstr "Configuració Multi-head"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "\tDo not include System Files\n"
-msgstr "\tNo incloguis els fitxers de sistema\n"
+msgid "No browser available! Please install one"
+msgstr "No hi ha cap navegador disponible! Si us plau, instal·leu-ne un"
-#
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
"\n"
-"- Options:\n"
+"%s"
msgstr ""
+"Voleu conservar els canvis?\n"
+"La configuració actual és:\n"
"\n"
-"- Opcions:\n"
+"%s"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t nom d'usuari: %s\n"
-"\t\t en el camí: %s \n"
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "No podeu utilitzar el ReiserFS per a particions inferiors a 32 MB"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"- Save via %s on host: %s\n"
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
-"\n"
-"- Desa-ho a través de %s en l'ordinador central: %s\n"
+"El protocol rwho permet que els usuaris remots obtinguin una llista\n"
+"de tots els usuaris que estan connectats a un ordinador que està\n"
+"executant el dimoni rwho (similar al finger)."
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "\t\tErase=%s"
-msgstr "\t\tEsborra=%s"
+msgid "Domain name"
+msgstr "Nom de domini"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-"\n"
-"- Desa-ho a una cinta en el dispositiu: %s"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Sharing of local printers"
+msgstr "Impressores disponibles"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid " (multi-session)"
-msgstr " (multisessió)"
+#: ../../install_messages.pm:1
+#, fuzzy, c-format
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgstr "http://www.mandrakelinux.com/en/90errata.php3"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on device: %s"
-msgstr " en el dispositiu: %s"
+msgid "Available printers"
+msgstr "Impressores disponibles"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "RW"
-msgstr "RW"
+msgid "Empty"
+msgstr "Buit"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
-"- Burn to CD"
-msgstr ""
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
"\n"
-"- Crema a un CD"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
"\n"
-"- Suprimeix el arxius tar del disc dur en acabar.\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
"\n"
-"- Desa-ho en el disc dur en el camí: %s\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+"Monitor\n"
"\n"
-"- Other Files:\n"
-msgstr ""
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
"\n"
-"- Altres fitxers:\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- User Files:\n"
-msgstr ""
"\n"
-"- Fitxers d'usuari:\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "text width"
+msgstr "amplada del text"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount device %s?"
+msgstr "On voleu muntar el dispositiu %s?"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The default lease (in seconds)"
+msgstr "Lísing per defecte (en segons)"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Interface \"%s\""
+msgstr "Interfície %s"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "With basic documentation (recommended!)"
+msgstr "Amb la documentació bàsica (recomanat!)"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "1 button"
+msgstr "1 botó"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"- System Files:\n"
+"There are %d unknown printers directly connected to your system"
msgstr ""
"\n"
-"- Fitxers de sistema:\n"
+"Hi ha %d impressores desconegudes connectades directament a l'ordinador."
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
+#, c-format
+msgid "Test"
+msgstr "Test"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"Backup Sources: \n"
+"Allow/Forbid direct root login."
msgstr ""
-"\n"
-"Fonts de la còpia: \n"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Select user manually"
-msgstr "Seleccioneu l'usuari manualment"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Korea"
+msgstr "Més"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Backup Users"
-msgstr "Còpia de seguretat dels usuaris"
+msgid "Your choice? (default `%s'%s) "
+msgstr "Quina és la vostra elecció? (predeterminat '%s'%s)"
#
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Backup system"
-msgstr "Còpia de seguretat del sistema"
+msgid "Raw printer"
+msgstr "Impressora en cru (raw)"
-#
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "Si us plau, escolliu de què voleu fer la còpia de seguretat"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "official vendor name of the cpu"
+msgstr "el nom del venedor del dispositiu"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "on Tape Device"
-msgstr "en un dispositiu de cinta"
+msgid "Vendor"
+msgstr "Venedor"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "on CDROM"
-msgstr "en CDROM"
+msgid "Interface %s"
+msgstr "Interfície %s"
-#
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "across Network"
-msgstr "a la xarxa"
+msgid "Configure mouse"
+msgstr "Configura el ratolí"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "on Hard Drive"
-msgstr "en el disc dur"
+msgid "Choose the mount points"
+msgstr "Escolliu els punts de muntatge"
-#
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Please choose where you want to backup"
-msgstr "Si us plau, escolliu on voleu fer la còpia de seguretat"
+msgid "OK"
+msgstr "D'acord"
#
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "More Options"
-msgstr "Més opcions"
+msgid "Yugoslavian (latin)"
+msgstr "Iugoslau (llatí)"
-#
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "When"
-msgstr "Quan"
+msgid "Installing"
+msgstr "S'està instal·lant"
-#
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Where"
-msgstr "On"
+msgid "Launch userdrake"
+msgstr "Executa userdrake"
-#
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "What"
-msgstr "Què"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Is this an install or an upgrade?"
+msgstr "Es tracta d'una instal·lació o d'una actualització?"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr ""
-"Suprimeix els arxius tar del disc dur després de fer una còpia de seguretat "
-"en un altre suport."
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "ISDN card"
+msgstr "Targeta XDSI interna"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Send mail report after each backup to:"
-msgstr "Envia un informe per correu electrònic després de cada còpia a:"
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
+msgstr ""
+"Per compartir el vostre coneixement i ajudar a construir eines per a Linux, "
+"apunteu-vos als fòrums de discussió que trobareu a les nostres pàgines de la "
+"\"Comunitat\""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
"\n"
-"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-"Si us plau assegureu-vos que el dimoni cron està inclòs en els serveis. \n"
+"Felicitats, la configuració de xarxa i Internet ha finalitzat.\n"
+"Ara s'aplicarà la configuració al sistema.\n"
"\n"
-"Noteu que ara mateix tots els suports de xarxa també fan servir el disc dur."
-#
#: ../../standalone/drakbackup:1
#, c-format
+msgid "\t-Hard drive.\n"
+msgstr "\t-Disc dur.\n"
+
+#: ../../help.pm:1
+#, c-format
msgid ""
-"Please choose the\n"
-"media for backup."
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
+"\n"
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
-"Si us plau, trieu el\n"
-"suport per a la còpia."
#
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
+#, c-format
+msgid "Printer on remote CUPS server"
+msgstr "Impressora en servidor CUPS remot"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the time \n"
-"interval between each backup"
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
msgstr ""
-"Si us plau, escolliu l'interval \n"
-"de temps entre cada còpia de seguretat"
+"És impossible de suprimir la impressora \"%s\" d'Star Office/OpenOffice.org/"
+"GIMP."
-#
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Use daemon"
-msgstr "Utilitza dimoni"
+msgid "delete"
+msgstr "suprimeix"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "monthly"
-msgstr "mensual"
+msgid "here if no."
+msgstr "aquí si no."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "DHCP host name"
+msgstr "Nom de l'ordinador central"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid "weekly"
-msgstr "setmanal"
+msgid "The maximum lease (in seconds)"
+msgstr "Lísing màxim (en segons)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "daily"
-msgstr "diària"
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "Si us plau, seleccioneu el port sèrie a què està connectat el ratolí."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "hourly"
-msgstr "cada hora"
+msgid "Did it work properly?"
+msgstr "Ha funcionat correctament?"
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
#, c-format
-msgid "HardDrive / NFS"
-msgstr "Disc Dur / NFS"
+msgid "Poor"
+msgstr "Pobre"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
+msgid "The DHCP start range"
+msgstr "L'adreça inicial del rang del DHCP"
-#
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the directory to save to:"
-msgstr "Introduïu el directori on desar la còpia de seguretat:"
+msgid "Grenada"
+msgstr "Grenada"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr "Marqueu aquesta opció si voleu expulsar la cinta en acabar."
+msgid "Unsafe"
+msgstr "No segur"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr ""
-"Marqueu aquesta opció si voleu esborrar la cinta abans de fer la còpia de "
-"seguretat."
+msgid ", %s sectors"
+msgstr ", %s sectors"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "Marqueu aquesta opció si voleu emprar el dispositiu no rebobinable."
+msgid "No"
+msgstr "No"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please enter the device name to use for backup"
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
msgstr ""
-"Si us plau, introduïu el nom del dispositiu a utilitzar per fer la còpia"
-#
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use tape to backup"
-msgstr "Utilitza una cinta per fer la còpia de seguretat"
+msgid "Guadeloupe"
+msgstr "Guadalupe"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "No CD device defined!"
-msgstr "No s'ha definit cap dispositiu de CD!"
+msgid "could not find any font.\n"
+msgstr "no s'ha trobat cap font.\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Si us plau, entreu el nom de dispositiu de l'enregistradora de CD\n"
-" ex: 0,1,0"
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "Voleu que la tecla Enrere efectuï un Suprimeix en la consola?"
-#
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "Marqueu aquesta opció si feu servir un dispositiu DVDRAM"
+msgid "Vertical refresh rate"
+msgstr "Velocitat de refresc vertical"
-#
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
#, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "Marqueu aquesta opció si feu servir un dispositiu DVDR"
+msgid "Entering step `%s'\n"
+msgstr "S'està entrant en el pas '%s'\n"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid " Erase Now "
-msgstr " Esborra'l ara"
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Removing %s ..."
+msgstr "S'està esborrant %s"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "Marqueu aquesta opció si voleu esborrar el suport RW (1a sessió)"
+msgid "Niger"
+msgstr "Níger"
-#
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "Marqueu aquesta opció si feu servir un suport CDRW"
+msgid "No printer"
+msgstr "Cap impressora"
#
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Please check for multisession CD"
-msgstr "Marqueu aquesta opció si voleu un CD multisessió"
+msgid "alert configuration"
+msgstr "Configuració de l'avís"
-#
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "Si us plau, escolliu l'espai disponible en el CD/DVD (en MB)"
+msgid "NetWare Printer Options"
+msgstr "Opcions de la impressora NetWare"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
-msgstr ""
-"Seleccioneu el vostre dispositiu de CD/DVD\n"
-"(Premeu Retorn perquè aquestes opcions es propaguin a d'altres camps.\n"
-"Aquest camp no és necessari, només és una eina per omplir el formulari.)"
+msgid "%s BootSplash (%s) preview"
+msgstr "Vista prèvia del BootSplash %s (%s)"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Use CD/DVDROM to backup"
-msgstr "Utilitzar CD/DVDROM per fer la còpia de seguretat"
+msgid "General"
+msgstr "General"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Need hostname, username and password!"
-msgstr ""
-"Cal introduir el nom de l'ordinador central, el nom d'usuari i la "
-"contrasenya!"
+msgid "Printing system: "
+msgstr "Sistema d'impressió: "
-#
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Remember this password"
-msgstr "Recorda aquesta contrasenya"
+msgid "Add a user"
+msgstr "Afegeix un usuari"
-#
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please enter your password"
-msgstr "Si us plau, introduïu la contrasenya"
+msgid "Network configuration (%d adapters)"
+msgstr "Configuració de xarxa (%d adaptadors)"
-#
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "Please enter your login"
-msgstr "Si us plau, introduïu la vostra identificació (login)"
+msgid "Mandatory package %s is missing"
+msgstr "El paquet %s necessari falta"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
-msgstr ""
-"Si us plau, entreu el directori (o mòdul) d'aquest\n"
-"ordinador central on voleu desar la còpia de seguretat."
+msgid "Philippines"
+msgstr "Filipines"
-#
-#: ../../standalone/drakbackup:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
#, c-format
-msgid "Please enter the host name or IP."
-msgstr "Si us plau, introduïu el nom de l'ordinador o la IP."
+msgid "Ok"
+msgstr "D'acord"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
-msgstr ""
-"Ja hi ha les claus d'un altre programa\n"
-"(diferent del Drakbackup)"
+msgid "Print Queue Name"
+msgstr "Nom de la cua d'impressió"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-" Transfer \n"
-"Now"
-msgstr ""
-" Transfereix-ho \n"
-"ara"
+msgid "Do you want to use aboot?"
+msgstr "Voleu utilitzar l'aboot?"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
-msgstr ""
-"Crea/Transfereix\n"
-"la còpia de seguretat de les claus per a SSH"
+msgid "Belarusian"
+msgstr "Bielorrús"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use Expect for SSH"
-msgstr "Usa Expect en l'SSH"
+msgid ""
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
+msgstr ""
+"PDQ només funciona amb impressores locals, impressores LPD remotes, i "
+"impressores de Socket/TCP.\n"
-#: ../../standalone/drakbackup:1
+#
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Net Method:"
-msgstr "Mètode de xarxa:"
+msgid "Move files to the new partition"
+msgstr "Mou els fitxers a la nova partició"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use network connection to backup"
-msgstr "Empra la connexió de xarxa per fer la còpia de seguretat"
+msgid ""
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
+msgstr ""
#
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Users"
-msgstr "Usuaris"
+msgid "Restore From Catalog"
+msgstr "Restaura des de catàleg"
-#
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
+msgid "Pitcairn"
+msgstr "Pitcairn"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr ""
-"Usa les còpies de seguretat incrementals (no reemplacis les còpies antigues)"
+msgid "IDE"
+msgstr "IDE"
-#
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Remove Selected"
-msgstr "Elimina la selecció"
+msgid "group :"
+msgstr "grup :"
-#: ../../standalone/drakbackup:1
+#: ../../fs.pm:1
#, c-format
-msgid "Do not include the browser cache"
-msgstr "No incloguis la memòria cau del navegador"
+msgid "mounting partition %s in directory %s failed"
+msgstr "El muntatge de la partició %s en el directori %s ha fallat"
-#
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr ""
-"Si us plau, escolliu tots els usuaris que voleu incloure en la còpia de "
-"seguretat."
+msgid "Lilo screen"
+msgstr "Pantalla del LILO"
-#: ../../standalone/drakbackup:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Amb aquesta opció podreu restaurar qualsevol versió\n"
-" del directori /etc."
+msgid "LILO with graphical menu"
+msgstr "LILO amb menú gràfic"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "No incloguis fitxers crítics (passwd, group, fstab)"
+msgid "Estimating"
+msgstr "S'està estimant"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Use incremental backup (do not replace old backups)"
-msgstr ""
-"Usa la còpia de seguretat incremental (no reemplacis les còpies antigues)"
+msgid "You can't unselect this package. It is already installed"
+msgstr "No podeu desseleccionar aquest paquet; ja està instal·lat"
-#: ../../standalone/drakbackup:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Fes una còpia de seguretat dels fitxers del sistema (directori /etc)."
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr ", impressora \"%s\" en servidor SMB/Windows \"%s\""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Aquestes opcions poden fer còpia de seguretat i restaurar tots els fitxers "
-"del directory /etc.\n"
+msgid "Go on anyway?"
+msgstr "Voleu seguir igualment?"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"Please check all options that you need.\n"
+msgid "Looking for available packages and rebuilding rpm database..."
msgstr ""
-"\n"
-"Si us plau, marqueu totes les opcions que us calguin.\n"
+"S'estan cercant els paquets disponibles i reconstruint la base de dades "
+"d'rpm..."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Seleccioneu els fitxers i directoris i feu clic a 'Afegeix'"
+msgid "Does not appear to be recordable media!"
+msgstr "Sembla que el suport no és enregistrable!"
-#
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "File Selection"
-msgstr "Selecció de fitxers"
+msgid "Specify options"
+msgstr "Especifica les opcions"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Can't create catalog!"
-msgstr "No s'ha pogut crear el catàleg!"
+msgid "Vanuatu"
+msgstr "Vanuatu"
-#
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " Error while sending mail. \n"
-msgstr " S'ha produït un error en enviar el correu electrònic. \n"
+msgid "Either the server name or the server's IP must be given!"
+msgstr "Cal que subministreu o bé el nom del servidor o bé la seva IP!"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
"\n"
-"Drakbackup activities via tape:\n"
-"\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
msgstr ""
+"Un disc d'arrencada personalitzat proporciona una manera d'arrencar el "
+"vostre\n"
+"sistema Linux sense dependre del carregador d'arrencada normal. Això és "
+"útil\n"
+"si no voleu instal·lar el SILO al sistema, o si un altre sistema operatiu\n"
+"elimina el SILO, o si el SILO no funciona amb la vostra configuració de\n"
+"maquinari. Un disc d'arrencada personalitzat també es pot utilitzar amb la\n"
+"imatge de rescat del Mandrake, facilitant molt la recuperació de fallides\n"
+"serioses del sistema.\n"
"\n"
-"Activitats del Drakbackup a travès de cinta:\n"
-"\n"
+"Si voleu crear un disc d'arrencada per al vostre sistema, inseriu un disquet "
+"a la primera unitat i premeu \"D'acord\"."
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
+msgid "You can't use an encrypted file system for mount point %s"
msgstr ""
-"\n"
-"Activitats del Drakbackup a través del CD:\n"
-"\n"
+"No podeu utilitzar un sistema d'arxius xifrat per al punt de muntatge %s"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
-"\n"
-"Activitats del Drakbackup a través de %s:\n"
-"\n"
+msgid "Norfolk Island"
+msgstr "Illa Norfolk"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-" Hi ha hagut un problema en la connexió FTP: No ha estat possible enviar els "
-"fitxers de la còpia de seguretat per FTP.\n"
+msgid "Theme installation failed!"
+msgstr "La instal·lació dels temes ha fallat!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"file list sent by FTP: %s\n"
-" "
-msgstr ""
-"llista de fitxers enviada per FTP: %s\n"
-" "
+msgid "Nothing to do"
+msgstr "Res a fer"
-#
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No changes to backup!"
-msgstr "No s'ha fet cap canvi a la còpia de seguretat"
+msgid "Use for loopback"
+msgstr "Utilitza per a loopback"
-#
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Còpies de seguretat del disc dur..."
+msgid "Mandrake Bug Report Tool"
+msgstr "Eina per a la comunicació d'errors de programació (bugs) de Mandrake"
+
+#: ../../network/adsl.pm:1
+#, c-format
+msgid "use pppoe"
+msgstr "utilitza pppoe"
#
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Backup Other files..."
-msgstr "Fes una còpia de seguretat d'altres fitxers..."
+msgid "Moving files to the new partition"
+msgstr "S'estan movent els fitxers a la nova partició"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "Progrés de la còpia de seguretat del disc dur..."
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s amb acceleració 3D de maquinari EXPERIMENTAL"
-#
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1
#, c-format
-msgid "Backup User files..."
-msgstr "Fes una còpia de seguretat dels fitxers d'usuari..."
+msgid "Advanced"
+msgstr "Avançat"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Backup system files..."
-msgstr "Fes una còpia de seguretat dels fitxers del sistema..."
+msgid "Transfer"
+msgstr "Transfereix"
-#: ../../standalone/drakbackup:1
+#
+#: ../../keyboard.pm:1
#, c-format
-msgid "No tape in %s!"
-msgstr "No s'ha trobat cap cinta a %s"
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak (Suec)"
+#
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Permission problem accessing CD."
-msgstr "Hi ha hagut un problema de permisos en accedir al CD."
+msgid "More Options"
+msgstr "Més opcions"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "This may take a moment to erase the media."
-msgstr "Esborrar el suport pot trigar una estona."
+msgid "Afghanistan"
+msgstr "Afganistan"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Not erasable media!"
-msgstr "Aquest suport no es pot esborrar!"
+msgid "Delete Hard Drive tar files after backup to other media."
+msgstr ""
+"Suprimeix els arxius tar del disc dur després de fer una còpia de seguretat "
+"en un altre suport."
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr "Sembla que el suport no és enregistrable!"
+msgid ""
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
+msgstr ""
+"El cron és un programa UNIX estàndard que executa programes determinats\n"
+"per l'usuari en hores programades. El vixie cron afegeix un cert nombre de\n"
+"característiques al cron bàsic, incloent seguretat millorada i opcions\n"
+"de configuració més potents."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "No CDR/DVDR in drive!"
-msgstr "No s'ha trobat cap unitat de CDR/DVDR!"
+msgid "Burundi"
+msgstr "Burundi"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "WebDAV transfer failed!"
-msgstr "La transferència WebDAV ha fallat!"
+msgid "Add Client -->"
+msgstr "Afegeix un client -->"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "WebDAV remote site already in sync!"
-msgstr "El lloc remot WebDAV ja està sincronitzat!"
+msgid "Read carefully!"
+msgstr "Llegiu-ho atentament!"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Total progess"
-msgstr "Progrés total"
+msgid "RW"
+msgstr "RW"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
-"\n"
-"without being prompted for a password."
+"Please,\n"
+"type in your tv norm and country"
msgstr ""
-"La transferència s'ha completat amb èxit\n"
-"Comproveu que podeu entrar al servidor amb:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
-"\n"
-"sense que se us demani una contrasenya."
+"Si us plau,\n"
+"entreu la vostra normativa de tv i el país"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "%s not responding"
-msgstr "%s no respon"
+msgid "Port"
+msgstr "Port"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Can't find %s on %s"
-msgstr "No s'ha trobat %s a %s"
+msgid "No (experts only)"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr "S'ha denegat el permís per transferir %s a %s"
+msgid "No kernel selected!"
+msgstr "No heu seleccionat cap nucli!"
-#: ../../standalone/drakbackup:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "Bad password on %s"
-msgstr "Contrasenya incorrecta a %s"
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Premeu Retorn per arrencar el SO seleccionat, 'e' per editar les"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr "No es demana cap contrasenya a %s en el port %s"
+msgid "Set-GID"
+msgstr "Set-GID"
-#: ../../standalone/drakbackup:1
+#
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "ERROR: Cannot spawn %s."
-msgstr "S'ha produït un error: no s'ha pogut engendrar %s."
+msgid "The encryption keys do not match"
+msgstr "Les claus de xifratge no coincideixen"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr "La generació de les claus pot trigar una estona."
+msgid "Right \"Windows\" key"
+msgstr "Tecla de \"Windows\" Dreta"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
-"S'ha trobat %s, voleu suprimir-lo?\n"
-"Avís: Si ja heu seguit aquest procés, probablement us calgui\n"
-"purgar l'entrada del paràmetre 'authorized_keys' en el servidor."
+msgid "CDROM / DVDROM"
+msgstr "CDROM / DVDROM"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
-"\n"
+msgid "if set to yes, check empty password in /etc/shadow."
msgstr ""
-"\n"
-" Detalls de l'Informe del DrakBackup\n"
-"\n"
-"\n"
-#: ../../standalone/drakbackup:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
msgstr ""
-"\n"
-" Informe del Dimoni DrakBackup\n"
-"\n"
-"\n"
+"Abans de continuar, hauríeu de llegir amb deteniment les clàusules de la \n"
+"llicència. Aquesta cobreix la totalitat de la distribució Mandrake Linux.\n"
+"Si no esteu d'acord amb tots els termes de la llicència, feu clic al botó\n"
+"\"Refusa\" i la instal·lació terminarà immediatament. Per continuar amb la\n"
+"instal·lació, feu clic al botó \"Accepta\"."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Report \n"
+"Here is a list of the available printing options for the current printer:\n"
"\n"
msgstr ""
+"Aquí teniu una llista de les opcions d'impressió disponibles per a la "
+"impressora actual:\n"
"\n"
-" Informe del DrakBackup \n"
-"\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "INFO"
-msgstr "INFORMACIÓ"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "FATAL"
-msgstr "FATAL"
+msgid "Resolutions"
+msgstr "Resolucions"
-#: ../../standalone/drakbackup:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "WARNING"
-msgstr "AVÍS"
+msgid ""
+"drakfirewall configurator\n"
+"\n"
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
+msgstr ""
+"Configuració del drakfirewall\n"
+"\n"
+"Aquí es configura un tallafocs personal per a aquest ordinador Linux "
+"Mandrake.\n"
+"Per a una potent solució de tallafocs dedicada, consulteu si us plau la \n"
+"distribució especialitzada MandrakeSecurity Firewall."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Cron not available yet as non-root"
-msgstr "El cron encara no és disponible per a usuaris que no siguin root"
+msgid ""
+"Please enter your username, password and domain name to access this host."
+msgstr ""
+"Introduïu el vostre nom d'usuari, la contrasenya i el nom de domini per "
+"accedir a aquesta màquina."
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Ha fallat la instal·lació de %s. S'ha produït l'error següent:"
+#
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Remove selected host"
+msgstr "Elimina la selecció"
-#: ../../standalone/drakboot:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "No, I don't want autologin"
-msgstr "No, no vull l'entrada automàtica"
+msgid "Network configuration"
+msgstr "Configuració de xarxa"
-#: ../../standalone/drakboot:1
+#
+#: ../../any.pm:1
#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Sí, vull l'entrada automàtica amb aquest (usuari, escriptori)"
+msgid "No sharing"
+msgstr "No es comparteix"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "Executa la interfície gràfica en iniciar el sistema"
+msgid "Move selected rule down one level"
+msgstr "Baixa la regla actual un nivell"
-#: ../../standalone/drakboot:1
+#: ../../common.pm:1
#, c-format
-msgid "System mode"
-msgstr "Mode de sistema"
+msgid "TB"
+msgstr "TB"
-#: ../../standalone/drakboot:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bootsplash"
-msgstr "Bootsplash"
+msgid "Please check if you are using a DVDR device"
+msgstr "Marqueu aquesta opció si feu servir un dispositiu DVDR"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lilo screen"
-msgstr "Pantalla del LILO"
+msgid "FATAL"
+msgstr "FATAL"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
+"The network address is %s using a netmask of %s.\n"
"\n"
-"Seleccioneu un tema per a\n"
-"lilo i bootsplash, \n"
-"podeu triar-los\n"
-"per separat"
+msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Themes"
-msgstr "Temes"
+msgid "Delete"
+msgstr "Suprimeix"
-#: ../../standalone/drakboot:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Splash selection"
-msgstr "Selecció de pantalla de presentació"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid reboot by the console user."
+msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
msgstr ""
-"Actualment utilitzeu %s com a gestor de l'arrencada\n"
-"Feu clic a 'Configura' per executar l'auxiliar de configuració."
+"Puc configurar el vostre ordinador de manera que executi automàticament la "
+"interfície gràfica durant l'arrencada.\n"
+"Voleu que XFree s'iniciï quan torneu a arrencar l'ordinador?"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr "Els temes de LILO i de Bootsplash s'han instal·lat amb èxit"
+msgid "Build the disk"
+msgstr "Munta el disc"
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "Theme installation failed!"
-msgstr "La instal·lació dels temes ha fallat!"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnect %s"
+msgstr "Desconnecta"
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Notice"
-msgstr "Avís"
+msgid "Status:"
+msgstr "Estat:"
-#: ../../standalone/drakboot:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Relaunch 'lilo'"
-msgstr "Torna a executar 'lilo'"
+msgid "HTTP proxy"
+msgstr "Intermediari per a HTTP"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
-msgstr ""
-"No s'ha pogut tornar a executar LILO!\n"
-"Executa \"lilo\" com a root a la línia d'ordres per completar la "
-"instal·lació del tema del LILO."
+msgid "SSH Server"
+msgstr "Servidor SSH"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
-msgstr "Fes que initrd sigui 'mkinitrd -f /boot/initrd-%s.img %s'."
+msgid "\t-Network by rsync.\n"
+msgstr "\t-Xarxa per rsync.\n"
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr "No s'ha pogut executar mkinitrd -f /boot/initrd-%s.img %s."
+#
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "European protocol"
+msgstr "Protocol europeu"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
-msgstr ""
-"No s'ha pogut escriure /etc/sysconfig/bootsplash\n"
-"No s'ha trobat el fitxer."
+msgid ", printer \"%s\" on server \"%s\""
+msgstr ", impressora \"%s\", en el servidor \"%s\""
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
#, c-format
-msgid "Write %s"
-msgstr "Escriu %s"
+msgid "Error"
+msgstr "Error"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr "No s'ha pogut escriure /etc/sysconfig/bootsplash."
+msgid "allow \"su\""
+msgstr "permet \"su\""
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Lilo message not found"
-msgstr "No s'ha trobat el missatge de LILO"
+msgid "Australia"
+msgstr "Austràlia"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Copy %s to %s"
-msgstr "S'està copiant %s a %s"
+msgid "please wait during ttmkfdir..."
+msgstr "espereu si us plau durant ttmkfdir..."
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Backup %s to %s.old"
-msgstr "Fes una còpia de seguretat de %s en %s.old"
+msgid "Configure only card \"%s\"%s"
+msgstr "Configura només la targeta \"%s\"%s"
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "Create new theme"
-msgstr "Crea un nou tema"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Level"
+msgstr "nivell"
-#: ../../standalone/drakboot:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Change the printing system"
+msgstr "Modifica el sistema d'impressió"
+
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
msgid ""
-"Display theme\n"
-"under console"
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
msgstr ""
-"Mostra el tema\n"
-"sota la consola"
-
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "Install themes"
-msgstr "Instal·la els temes"
+"El vostre sistema permet l'ús d'una configuració de múltiples capçals.\n"
+"Què voleu fer?"
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
#, c-format
-msgid "Lilo/grub mode"
-msgstr "Mode LILO/Grub"
+msgid "Configure services"
+msgstr "Configura els serveis"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Yaboot mode"
-msgstr "Mode Yaboot"
+msgid "Broadcast Address:"
+msgstr ""
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
+msgid "mount failed: "
+msgstr "ha fallat el muntatge: "
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "/File/_Quit"
-msgstr "/Fitxer/_Surt"
+msgid ""
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
+msgstr ""
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "/_File"
-msgstr "/_Fitxer"
+msgid "Image"
+msgstr "Imatge"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Boot Style Configuration"
-msgstr "Configuració del tipus d'arrencada"
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"És impossible d'afegir la impressora \"%s\" a Star Office/OpenOffice.org/"
+"GIMP."
-#: ../../standalone/drakbug:1
+#
+#: ../../services.pm:1
#, c-format
-msgid "No browser available! Please install one"
-msgstr "No hi ha cap navegador disponible! Si us plau, instal·leu-ne un"
+msgid "Remote Administration"
+msgstr "Administració remota"
-#: ../../standalone/drakbug:1
+#: ../../modules.pm:1
#, c-format
-msgid "connecting to Bugzilla wizard ..."
-msgstr "s'està connectant amb l'auxiliar de Bugzilla..."
-
-#
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Package not installed"
-msgstr "No instal·lat"
+msgid ""
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+msgstr ""
+"El suport per a PCMCIA ja no existeix en els nuclis 2.2. Utilitzeu un nucli "
+"2.4."
#
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Not installed"
-msgstr "No instal·lat"
+msgid "Selected All"
+msgstr "Selecciona-ho tot"
-#: ../../standalone/drakbug:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Standalone Tools"
-msgstr "Eines autònomes"
+msgid "CUPS - Common Unix Printing System"
+msgstr "CUPS - Common Unix Printing System"
#
-#: ../../standalone/drakbug:1
-#, c-format
-msgid "Report"
-msgstr "Informa"
-
-#: ../../standalone/drakbug:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"Per trametre un informe d'error de programació, feu clic al botó 'Informa'.\n"
-"S'obrirà una finestra del navegador web amb la pàgina https://drakbug."
-"mandrakesoft.com\n"
-"on trobareu un formulari per omplir. La informació que es mostra més amunt "
-"s'enviarà al servidor.\n"
-"\n"
+msgid "Webmin Service"
+msgstr "Servei Webmin"
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Release: "
-msgstr "Llançament: "
+msgid "device"
+msgstr "dispositiu"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Kernel:"
-msgstr "Nucli: "
+msgid "All"
+msgstr "Tots"
#
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Package: "
-msgstr "Paquet: "
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "Quin sistema d'impressió (cua) voleu utilitzar?"
-#: ../../standalone/drakbug:1
+#
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Application:"
-msgstr "Aplicació:"
+msgid "Greece"
+msgstr "Grècia"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Configuration Wizards"
-msgstr "Auxiliars de configuració"
+msgid "An error occurred"
+msgstr "S'ha produït un error"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
+msgstr ""
+"Aquest paquet s'ha d'actualitzar.\n"
+"Esteu segur que voleu desseleccionar-lo?"
-#: ../../standalone/drakbug:1
-#, c-format
-msgid "Windows Migration tool"
-msgstr "Eina de migració des de Windows"
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Tamil (Typewriter-layout)"
+msgstr "Armeni (màquina d'escriure)"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
+msgid "manual"
+msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Software Manager"
-msgstr "Gestor de programari"
+msgid "Printer manufacturer, model, driver"
+msgstr "Fabricant de la impressora, model, controlador"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Remote Control"
-msgstr "Control Remot"
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"No hi ha cap suport al dispositiu %s o està protegit contra escriptura.\n"
+"Si us plau, inseriu-ne un."
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Msec"
-msgstr "Msec"
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
+msgstr ""
+"El directori %s encara conté dades\n"
+"(%s)"
#
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
+msgid "Printer on NetWare server"
+msgstr "Impressora en servidor NetWare"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Mandrake Online"
-msgstr "Mandrake Online"
+msgid "Give the ram size in MB"
+msgstr "Introduïu la mida de la RAM en MB"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
+msgid "Real name"
+msgstr "Nom real"
-#: ../../standalone/drakbug:1
+#
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Synchronization tool"
-msgstr "Eina de sincronització"
+msgid "done"
+msgstr "fet"
-#: ../../standalone/drakbug:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "First Time Wizard"
-msgstr "Auxiliar per a la primera vegada"
+msgid "Please uncheck or remove it on next time."
+msgstr "Si us plau, desseleccioneu-ho o esborreu-ho la pròxima vegada."
-#: ../../standalone/drakbug:1
+#
+#: ../../security/level.pm:1
#, c-format
-msgid "Mandrake Control Center"
-msgstr "Centre de Control Mandrake"
+msgid "Higher"
+msgstr "Més Alt"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mandrake Bug Report Tool"
-msgstr "Eina per a la comunicació d'errors de programació (bugs) de Mandrake"
+msgid "Choose the partitions you want to format"
+msgstr "Escolliu les particions que voleu formatar"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Parameters"
-msgstr "Paràmetres"
+msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
+msgstr ""
+"No s'ha detectat cap targeta de TV en el vostre ordinador. Si us plau "
+"verifiqueu que teniu correctament inserida una targeta de Vídeo/TV "
+"compatible amb Linux.\n"
+"\n"
+"\n"
+"Podeu visitar la nostra base de dades de maquinari a:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Internet Connection Configuration"
-msgstr "Configuració de la connexió a Internet"
+msgid "Can't find %s on %s"
+msgstr "No s'ha trobat %s a %s"
-#: ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "DHCP Client"
-msgstr "Client DHCP"
+msgid "Japanese 106 keys"
+msgstr "Japonès de 106 tecles"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Ethernet Card"
-msgstr "Targeta Ethernet"
+msgid "This will take a few minutes."
+msgstr "Això trigarà uns minuts."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Gateway"
-msgstr "Passarel·la"
+msgid "Burkina Faso"
+msgstr "Burkina Faso"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Connection type: "
-msgstr "Tipus de connexió: "
+msgid "Use scanners on remote computers"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Profile: "
-msgstr "Perfil: "
+msgid "Delete selected rule"
+msgstr "Elimina la regla seleccionada"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Internet connection configuration"
-msgstr "Configuració de la connexió a Internet"
+#
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Impressora en servidor CUPS remot"
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"No teniu cap connexió a Internet.\n"
-"Creeu-ne una fent clic a 'Configura'"
+msgid "Insert a floppy in %s"
+msgstr "Inseriu un disquet a la unitat %s"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Aquesta interfície encara no s'ha configurat.\n"
-"Executeu l'auxiliar de configuració en la finestra principal"
+msgid "Maldives"
+msgstr "Maldives"
-#
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "activate now"
-msgstr "Activa'l ara"
+msgid "compact"
+msgstr "compacte"
-#
-#: ../../standalone/drakconnect:1
+#: ../../common.pm:1
#, c-format
-msgid "deactivate now"
-msgstr "Desactiva'l ara"
+msgid "1 minute"
+msgstr "1 minut"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DHCP client"
-msgstr "Client DHCP"
+msgid "on channel %d id %d\n"
+msgstr "al canal %d amb id %d\n"
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Started on boot"
-msgstr "Iniciat en l'arrencada"
+msgid ", multi-function device"
+msgstr ", dispositiu multifunció"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Boot Protocol"
-msgstr "Protocol d'arrencada"
+msgid "Laos"
+msgstr ""
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptador %s: %s"
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr ""
+"No hi ha cap partició FAT a la qual canviar la mida o que es pugui utilitzar "
+"com a loopback (o no hi queda prou espai)"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "LAN Configuration"
-msgstr "Configuració de la LAN"
+msgid "Up"
+msgstr "Puja"
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Firewall"
+msgstr "Tallafoc/Encaminador"
+
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "LAN configuration"
-msgstr "Configuració de la LAN"
+msgid "Area:"
+msgstr "Àrea:"
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
+msgid "(E)IDE/ATA controllers"
msgstr ""
-"No teniu cap interfície configurada.\n"
-"Configureu-la primer fent clic a 'Configura'"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Connect..."
-msgstr "Connecta..."
+msgid "Printer Server"
+msgstr "Servidor de la impressora"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Disconnect..."
-msgstr "Desconnecta..."
+msgid "Disconnection from the Internet complete."
+msgstr ""
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Custom configuration"
+msgstr "Configuració de l'avís"
+
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Not connected"
-msgstr "Sense connexió"
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connected"
-msgstr "Connectat"
+msgid "Saint Pierre and Miquelon"
+msgstr "Saint Pierre i Miquelon"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
msgstr ""
-"Avís: s'ha detectat una altra connexió a Internet, podria estar utilitzant "
-"la vostra xarxa"
+"\n"
+"Problemes durant la restauració de còpies de seguretat:\n"
+"\n"
+"Durant el pas de restauració, el Drakbackup verificarà tots\n"
+"els fitxers de les còpies de seguretat abans de restaurar-los.\n"
+"Abans de la restauració, el Drakbackup esborrarà \n"
+"els directoris originals, i perdreu totes les vostres \n"
+"dades. És important de tenir cura i no modificar a mà els \n"
+"fitxers de còpia de seguretat.\n"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Interface:"
-msgstr "Intefície:"
+msgid "saving Bootsplash theme..."
+msgstr "s'està desant el tema Bootsplash..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Gateway:"
-msgstr "Passarel·la:"
+msgid "Portugal"
+msgstr "Portugal"
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Apply"
-msgstr "Aplica"
+msgid "Do you have another one?"
+msgstr "En teniu una altra?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Click here to launch the wizard ->"
-msgstr "Feu clic aquí per executar l'auxiliar ->"
+msgid ", printing to %s"
+msgstr ", imprimint a %s"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Wizard..."
-msgstr "Auxiliar..."
+#
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Assign host name from DHCP address"
+msgstr "Si us plau, introduïu el nom de l'ordinador o la IP."
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Status:"
-msgstr "Estat:"
+msgid "Toggle to normal mode"
+msgstr "Canvia al mode normal"
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Type:"
-msgstr "Tipus:"
+msgid "Generic"
+msgstr "Genèric"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Internet access"
-msgstr "Accés a Internet"
+msgid "Cylinder %d to %d\n"
+msgstr "Cilindre %d a %d\n"
#: ../../standalone/drakconnect:1
#, c-format
-msgid "Hostname: "
-msgstr "Nom de l'ordinador central: "
+msgid "New profile..."
+msgstr "Perfil nou..."
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Configura la xarxa d'àrea local..."
+msgid "Which disk do you want to move it to?"
+msgstr "A quin disc ho voleu moure?"
-#
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "State"
-msgstr "Estat"
+msgid "Display logo on Console"
+msgstr "Mostra el logotip a la consola"
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Driver"
-msgstr "Controlador"
+msgid "Windows Domain"
+msgstr "Domini de Windows"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Protocol"
-msgstr "Protocol"
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Interface %s (on network %s)"
+msgstr "Interfície %s (utilitzant el mòdul %s)"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Interface"
-msgstr "Interfície"
+msgid "INFO"
+msgstr "INFORMACIÓ"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Wallis and Futuna"
+msgstr "Illes Wallis i Futuna"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Configure Internet Access..."
-msgstr "Configura l'accés a Internet..."
+msgid "Need to create /etc/dhcpd.conf first!"
+msgstr "Abans cal crear /etc/dhcpd.conf!"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Wait please"
-msgstr "Espereu si us plau"
+msgid "Is FPU present"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "There are no scanners found which are available on your system.\n"
+msgstr "No s'ha trobat cap impressora connectada directament a l'ordinador"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
+"No additional information\n"
+"about this service, sorry."
msgstr ""
-"Nom del perfil a crear (el nou perfil es crea com una còpia de l'actual):"
+"Malauradament no hi ha més informació\n"
+"sobre aquest servei."
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "New profile..."
-msgstr "Perfil nou..."
+msgid "Build Single NIC -->"
+msgstr "Munta un NIC senzill -->"
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Profile to delete:"
-msgstr "Perfil a suprimir:"
+msgid "Is this correct?"
+msgstr "Això és correcte?"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Del profile..."
-msgstr "Suprimeix el perfil..."
+msgid "Marshall Islands"
+msgstr "Illes Marshall"
-#: ../../standalone/drakconnect:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Configuració de xarxa (%d adaptadors)"
+msgid "Windows (FAT32)"
+msgstr "Windows (FAT32)"
-#: ../../standalone/drakedm:1
+#: ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Root password"
+msgstr "Sense contrasenya"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
+msgid "Build All Kernels -->"
+msgstr "Munta tots els nuclis -->"
-#: ../../standalone/drakedm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choosing a display manager"
+msgid "if set to yes, report unowned files."
msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
msgstr ""
-"No es pot tancar l'mkbootdisk correctament: \n"
-" %s \n"
-" %s"
+"No teniu cap partició d'intercanvi.\n"
+"\n"
+"Voleu continuar igualment?"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Server IP missing!"
+msgstr "Falta el nom del Servidor NCP!"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Unable to fork: %s"
-msgstr "No es pot bifurcar: %s"
+msgid "Suriname"
+msgstr "Surinam"
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Enable ACPI"
+msgstr "Voleu habilitar l'arrencada des de CD?"
+
+#: ../../help.pm:1
#, c-format
-msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
-msgstr ""
-"No hi ha cap suport al dispositiu %s o està protegit contra escriptura.\n"
-"Si us plau, inseriu-ne un."
+msgid "Graphical Environment"
+msgstr "Entorn gràfic"
-#: ../../standalone/drakfloppy:1
+#: ../../lang.pm:1
#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "Assegureu-vos que hi ha un suport al dispositiu %s"
+msgid "Gibraltar"
+msgstr "Gibraltar"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Build the disk"
-msgstr "Munta el disc"
+msgid "on Tape Device"
+msgstr "en un dispositiu de cinta"
-#: ../../standalone/drakfloppy:1
+#: ../../network/modem.pm:1
+#, fuzzy, c-format
+msgid "Do nothing"
+msgstr "però que no coincideixin amb"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Delete Client"
+msgstr "<-- Suprimeix un client"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Output"
-msgstr "Sortida"
+msgid "Filesystem type: "
+msgstr "Tipus de sistema de fitxers: "
-#: ../../standalone/drakfloppy:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove a module"
-msgstr "Elimina un mòdul"
+msgid "Starting network..."
+msgstr "S'està arrencant la xarxa..."
-#: ../../standalone/drakfloppy:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Vietnam"
+msgstr "Vienam"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/_Fields description"
+msgstr "Descripció"
+
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "Add a module"
-msgstr "Afegeix un mòdul"
+msgid "Optimize your security by using Mandrake Linux"
+msgstr "Optimitzeu la vostra seguretat"
-#: ../../standalone/drakfloppy:1
+#
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "omit scsi modules"
-msgstr "omet els mòduls SCSI"
+msgid "Help"
+msgstr "Ajuda"
-#: ../../standalone/drakfloppy:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "if needed"
-msgstr "si cal"
+msgid "Your personal phone number"
+msgstr "El vostre telèfon particular"
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "omit raid modules"
-msgstr "omet els mòduls RAID"
+msgid "Which size do you want to keep for Windows on"
+msgstr "Quina mida voleu deixar per a la partició de Windows?"
-#: ../../standalone/drakfloppy:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "force"
-msgstr "imposa"
+msgid ""
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+msgstr ""
+"La(es) pàgina(es) de prova s'ha(n) enviat a la impressora.\n"
+"Pot passar un cert temps abans no comenci la impressió.\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "mkinitrd optional arguments"
-msgstr "Arguments opcionals de l'mkinitrd"
+msgid "Username required"
+msgstr "El nom d'usuari és necessari"
-#: ../../standalone/drakfloppy:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
+msgstr ""
+"Normalment, el DrakX selecciona el teclat correcte (segons l'idioma que\n"
+"hagueu escollit). Tanmateix, podríeu tenir un teclat que no correspongués "
+"exactament\n"
+"al vostre idioma, per exemple: si sou un suís que parla anglès, encara "
+"voldreu\n"
+"que el teclat sigui suís. O si parleu anglès però viviu al Quebec, us "
+"podeu \n"
+"trobar en la mateixa situació. En tots dos casos, haureu de tornar a aquest "
+"pas\n"
+"de la instal·lació i seleccionar un teclat adequat de la llista.\n"
+"\n"
+"Feu clic al botó \"Més\" per veure la llista completa de teclats disponibles."
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Expert Area"
-msgstr "Àrea d'experts"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "Opcions de la impressora SMB (Windows 9x/NT)"
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
-msgid "kernel version"
-msgstr "versió del nucli"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
#: ../../standalone/drakfloppy:1
#, c-format
-msgid "default"
-msgstr "predeterminat"
+msgid "mkinitrd optional arguments"
+msgstr "Arguments opcionals de l'mkinitrd"
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "General"
-msgstr "General"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#
+#: ../../network/isdn.pm:1
#, c-format
-msgid "boot disk creation"
-msgstr "creació de discs d'arrencada"
+msgid "Protocol for the rest of the world"
+msgstr "Protocol per a la resta del món"
-#: ../../standalone/drakfloppy:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "Print test pages"
+msgstr "Imprimeix la(es) pàgina(es) de prova"
-#: ../../standalone/drakfloppy:1
+#
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Size"
-msgstr "Mida"
+msgid "64 MB or more"
+msgstr "64 MB o més"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Module name"
-msgstr "Nom del mòdul"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
+"Escolliu les pàgines de prova que voleu imprimir.\n"
+"Nota: la pàgina de prova de fotografia pot ser molt lenta d'imprimir i en "
+"impressores làser amb poca memòria podria no acabar d'imprimir-se. "
+"Normalment n'hi ha prou d'imprimir la pàgina de prova estàndard."
-#
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Please select the device where your %s is attached"
+msgstr ""
+"Scannerdrake no ha pogut detectar el vostre escàner %s.\n"
+"Si us plau seleccioneu el dispositiu al qual teniu connectat l'escàner"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Post Uninstall"
-msgstr "Post-desinstal·lació"
+msgid "Not formatted\n"
+msgstr "Sense formatar\n"
-#
-#: ../../standalone/drakfont:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Remove fonts on your system"
-msgstr "Esborra fonts del sistema"
+msgid "Periodic Checks"
+msgstr "Comprovacions periòdiques"
#
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "Initial tests"
-msgstr "Comprovacions inicials"
+msgid "PXE Server Configuration"
+msgstr "Configuració del servidor dhcpd"
#
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Post Install"
-msgstr "Post-instal·lació"
+msgid "Backup the system files before:"
+msgstr "Fes primer la còpia de seguretat dels fitxers de sistema:"
-#: ../../standalone/drakfont:1
+#
+#: ../../security/level.pm:1
#, c-format
-msgid "Install & convert Fonts"
-msgstr "Instal·la i converteix les Fonts"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"Aquesta és la seguretat estàndard recomanada per a un ordinador que "
+"s'utilitzarà per connectar-se a Internet com a client. Ara hi ha "
+"comprovacions de seguretat."
-#
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Copy fonts on your system"
-msgstr "Copiar les fonts en el vostre sistema"
+msgid "First floppy drive"
+msgstr "Primera unitat de disquet"
-#
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Remove List"
-msgstr "Esborra la llista"
+msgid "/File/_Quit"
+msgstr "/Fitxer/_Surt"
-#
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Selected All"
-msgstr "Selecciona-ho tot"
+msgid "Dvorak"
+msgstr "Dvorak"
-#: ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Unselected All"
-msgstr "Desselecciona-ho tot"
+msgid "Choose the new size"
+msgstr "Escolliu la nova mida"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "here if no."
-msgstr "aquí si no."
+msgid "Media class"
+msgstr "Tipus de mitjà"
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "The %s is not known by this version of Scannerdrake."
+msgstr "El %s no és compatible amb aquesta versió de Mandrake Linux."
+
+#: ../../lang.pm:1
#, c-format
-msgid "click here if you are sure."
-msgstr "feu clic aquí si ho teniu clar."
+msgid "Faroe Islands"
+msgstr "Illes Fèroe"
#
#: ../../standalone/drakfont:1
#, c-format
-msgid "Install List"
-msgstr "Llista d'instal·lació"
+msgid "Restart XFS"
+msgstr "Reinicia l'XFS"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Seleccioneu el fitxer o directori de fonts i feu clic a 'Afegeix'"
+msgid "Add host/network"
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
msgstr ""
-"Abans d'instal·lar cap font, assegureu-vos que teniu el dret a usar-les i "
-"instal·lar-les en el vostre sistema.\n"
-"\n"
-"Podeu instal·lar les fonts de la manera habitual. En casos estranys, fonts "
-"amb errors poden penjar el vostre servidor X."
#
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Generic Printers"
-msgstr "Impressores genèriques"
+msgid "Please enter the directory to save to:"
+msgstr "Introduïu el directori on desar la còpia de seguretat:"
-#
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model name"
+msgstr "Nom del mòdul"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Abiword"
-msgstr "Abiword"
+msgid "Albania"
+msgstr "Albània"
-#
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
+msgid "No CDR/DVDR in drive!"
+msgstr "No s'ha trobat cap unitat de CDR/DVDR!"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
+msgid "British Indian Ocean Territory"
+msgstr "Territori Britànic de l'Oceà Índic"
-#
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Escolliu les aplicacions que suportaran les fonts:"
+msgid "Normal Mode"
+msgstr "Mode normal"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
+#: ../../standalone/drakbackup:1
+#, c-format
msgid ""
+"Please be sure that the cron daemon is included in your services. \n"
"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
+"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-" Aquest programa és programari lliure; el podeu redistribuir i/o modificar\n"
-" sota els termes de la 'GNU General Public License' publicada per\n"
-" la Free Software Foundation; tant la versió 2 com (si voleu)\n"
-" qualsevol versió posterior.\n"
-"\n"
-" Aquest programa és distribueix amb l'esperança que serà útil,\n"
-" però SENSE CAP GARANTIA; sense ni tant sols la garantia implícita de\n"
-" MERCANTIBILITAT o CAPACITAT DE REALITZAR UN DETERMINAT PROPÒSIT. Mireu la\n"
-" 'GNU General Public License' per a més detalls.\n"
+"Si us plau assegureu-vos que el dimoni cron està inclòs en els serveis. \n"
"\n"
-" Hauríeu d'haver rebut una còpia de la 'GNU General Public License'\n"
-" amb el programa; si no és així, escriviu a la Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "About"
-msgstr "Abandona"
+"Noteu que ara mateix tots els suports de xarxa també fan servir el disc dur."
#
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Font List"
-msgstr "Llista de fonts"
+msgid "Printer connection type"
+msgstr "Tipus de connexió de la impressora"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Advanced Options"
-msgstr "Opcions avançades"
+msgid "No network adapter on your system!"
+msgstr "No teniu cap adaptador de xarxa al sistema!"
#
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "Uninstall Fonts"
-msgstr "Desinstal·la fonts"
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Network %s"
+msgstr "Xarxa"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Get Windows Fonts"
-msgstr "Aconsegueix les fonts de Windows"
+msgid "Malayalam"
+msgstr ""
-#
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Import Fonts"
-msgstr "Importació de fonts"
+msgid "Option %s out of range!"
+msgstr "L'opció %s està fora de rang!"
-#
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "done"
-msgstr "fet"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connect %s"
+msgstr "Connecta"
#
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "xfs restart"
-msgstr "reinicialització de l'xfs"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Restarting CUPS..."
+msgstr "Reinicia l'XFS"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Suppress Fonts Files"
-msgstr "Suprimeix els fitxers de fonts"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "S'està imprimint/escanejant/llegint targetes de fotos en \"%s\""
-#
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Restart XFS"
-msgstr "Reinicia l'XFS"
+msgid "Duplicate mount point %s"
+msgstr "Duplica el punt de muntatge %s"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Suppress Temporary Files"
-msgstr "Suprimeix els fitxers temporals"
+msgid "if set to yes, run chkrootkit checks."
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "type1inst building"
-msgstr "construcció de type1inst"
+msgid "Connection Configuration"
+msgstr "Configuració de la connexió"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "pfm fonts conversion"
-msgstr "conversió de fonts pfm"
+msgid "Unknown|Generic"
+msgstr "Desconegut|Genèric"
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "ttf fonts conversion"
-msgstr "convesió de fonts ttf"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
+msgstr ""
+"Ara esteu instal·lant el Mandrake Linux, però és probable que alguns "
+"paquets\n"
+"hagin estat actualitzats desde la data de llançament. Alguns errors poden "
+"haver\n"
+"estat resolts, i altres problemes de seguretat poden estar ja corregits. "
+"Per\n"
+"beneficiar-vos d'aquestes actualitzacions, us proposem de baixar-les "
+"d'Internet.\n"
+"Trieu \"Sí\" si teniu una connexió a Internet operativa, o \"No\" si voleu\n"
+"instal·lar-les més tard.\n"
+"\n"
+"Si trieu \"Sí\" apareixerà una llista de llocs des d'on podeu baixar-vos "
+"les\n"
+"actualitzacions. Escolliu la ubicació més propera. Aleshores, apareixerà "
+"un \n"
+"arbre de selecció de paquets: comproveu la selecció i premeu \"Instal·la\" "
+"per\n"
+"baixar i instal·lar els paquets seleccionats, o \"Cancel·la\" per abandonar."
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Ghostscript referencing"
-msgstr "referenciat Ghostscript"
+msgid "Quit"
+msgstr "Surt"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Fonts conversion"
-msgstr "Conversió de fonts"
+msgid "Myanmar"
+msgstr "Myanmar"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "True Type install done"
-msgstr "Instal·lació de True Type feta"
+msgid "Auto allocate"
+msgstr "Assigna automàticament"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "espereu si us plau durant ttmkfdir..."
+msgid "Check bad blocks?"
+msgstr "Voleu comprovar els blocs incorrectes?"
#
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "True Type fonts installation"
-msgstr "Instal·lació de les fonts True Type"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Other MultiMedia devices"
+msgstr "Altres suports"
+
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "No remote machines"
+msgstr "(en aquest ordinador)"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"Benvingut a l'auxiliar de configuració de la impressora\n"
+"\n"
+"Aquest auxiliar us ajudarà a instal·lar les impressores connectades a aquest "
+"ordinador.\n"
+"\n"
+"Si teniu impressores connectades a aquesta màquina, endolleu-les i engegueu-"
+"les per tal de poder-les detectar automàticament.\n"
+"\n"
+"Feu clic a \"Següent\" quan estigueu preparat, o a \"Cancel·la\" si no voleu "
+"configurar ara les impressores."
#
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Fonts copy"
-msgstr "Còpia de fonts"
+msgid "Authentication NIS"
+msgstr "Autenticació NIS"
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Search for fonts in installed list"
-msgstr "Cerca les fonts en la llista de les instal·lades"
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr ""
+"L'opció \"Limita les opcions de la línia d'ordres\" no té cap utilitat sense "
+"una contrasenya"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "could not find any font.\n"
-msgstr "no s'ha trobat cap font.\n"
+msgid "Internet Connection Sharing currently enabled"
+msgstr "La connexió a Internet compartida està habilitada"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Reselect correct fonts"
-msgstr "Torna a seleccionar les fonts correctes"
+msgid "Card IO_0"
+msgstr "E/S_0 de la Targeta"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr "no s'ha pogut trobar cap font en les particions muntades"
+msgid "United Arab Emirates"
+msgstr "Unió dels Emirats Àrabs"
-#
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "no fonts found"
-msgstr "no s'han trobat fonts"
+msgid "Card IO_1"
+msgstr "E/S_1 de la Targeta"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "parse all fonts"
-msgstr "analitza totes les fonts"
+msgid "Thailand"
+msgstr "Tailàndia"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Unselect fonts installed"
-msgstr "Desselecciona les fonts instal·lades"
+msgid "Routers:"
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Search installed fonts"
-msgstr "Cerca les fonts instal·lades"
+msgid "Kazakhstan"
+msgstr "Kazakhstan"
-#: ../../standalone/drakgw:1
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Display all available remote CUPS printers"
msgstr ""
-"Benvingut a la utilitat de compartició de la connexió a Internet!\n"
-"\n"
-"%s\n"
-"\n"
-"Feu clic a 'Configura' per executar l'auxiliar de configuració."
+"Refresca la llista d'impressores (per veure totes les impressores CUPS "
+"remotes disponibles)"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_newt.pm:1
#, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "Configuració de la compartició de la connexió a Internet"
+msgid "Mandrake Linux Installation %s"
+msgstr "Instal·lació del Mandrake Linux %s"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "No s'ha configurat mai cap connexió compartida a Internet."
+msgid "Thai keyboard"
+msgstr "Teclat tai"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "La configuració ja s'ha realitzat i ara està habilitada."
+msgid "Dialup options"
+msgstr "Opcions de marcatge"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "La configuració ja s'ha realitzat, però ara està inhabilitada."
+msgid "Bouvet Island"
+msgstr "Illa Bouvet"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "If no port is given, 631 will be taken as default."
+msgstr ""
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
+"Change your Cd-Rom!\n"
+"\n"
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
-"Ja està tot configurat.\n"
-"Ara podeu compartir la connexió a Internet amb altres ordinadors de la "
-"vostra xarxa d'àrea local utilitzant la configuració automàtica de xarxa "
-"(DHCP)."
+"Canvieu el CD-ROM!\n"
+"\n"
+"Si us plau, inseriu el CD-ROM etiquetat com \"%s\" a la unitat i després\n"
+"premeu D'acord.\n"
+"Si no el teniu, premeu Cancel·la per no fer la instal·lació des d'aquest CD-"
+"ROM."
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Problems installing package %s"
-msgstr "Hi ha hagut problemes en instal·lar el paquet %s"
+msgid "Polish"
+msgstr "Polonès"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"S'estan configurant les seqüències, instal·lant el programari, iniciant els "
-"servidors..."
+msgid "Mandrake Online"
+msgstr "Mandrake Online"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configuring..."
-msgstr "S'està configurant..."
+msgid "\t-Network by webdav.\n"
+msgstr "\t-Xarxa per webdav.\n"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
+msgid ""
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
msgstr ""
-"S'ha trobat un conflicte potencial d'adreça LAN en la configuració actual de "
-"%s!\n"
+"No s'ha detectat cap adaptador de xarxa ethernet al sistema. Si us plau, "
+"executeu l'eina de configuració de maquinari."
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakgw:1
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "La xarxa local no finalitza amb '.0', ho deixem córrer."
+msgid "Netmask"
+msgstr "Submàscara de xarxa"
-#: ../../standalone/drakgw:1
+#
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "Torna a configurar la interfície i el servidor DHCP"
+msgid "No hard drives found"
+msgstr "No s'ha trobat cap disc dur!"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr "Lísing màxim (en segons)"
+msgid "Logitech CC Series"
+msgstr "Logitech CC Series"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "The default lease (in seconds)"
-msgstr "Lísing per defecte (en segons)"
+msgid "2 buttons"
+msgstr "2 botons"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The DHCP end range"
-msgstr "L'adreça final del rang del DHCP"
+msgid "What kind is your ISDN connection?"
+msgstr "Quin tipus de connexió XDSI teniu?"
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
#, c-format
-msgid "The DHCP start range"
-msgstr "L'adreça inicial del rang del DHCP"
+msgid "Label"
+msgstr "Etiqueta"
-#
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The internal domain name"
-msgstr "Nom intern de domini"
+msgid "Save on floppy"
+msgstr "Desa al disquet"
#
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The DNS Server IP"
-msgstr "IP del Servidor DNS"
+msgid "Printer auto-detection"
+msgstr "Detecció automàtica d'impressores"
-#
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "Which of the following is your ISDN card?"
+msgstr "Quina targeta XDSI teniu?"
+
+#: ../../services.pm:1
#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "IP d'aquest servidor DHCP"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
+msgstr ""
+"L'NFS és un protocol popular de compartició de fitxers en xarxes TCP/IP.\n"
+"Aquest servei proporciona la funcionalitat del servidor NFS, que es\n"
+"configura mitjançant el fitxer /etc/exports."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Msec"
+msgstr "Msec"
+
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"DHCP Server Configuration.\n"
-"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
-"\n"
+"=> Notice, a label changed:\n"
+"%s"
msgstr ""
-"Configuració del servidor DHCP.\n"
-"\n"
-"Aquí podreu seleccionar diverses opcions per a la configuració del servidor "
-"DHCP.\n"
-"Si no sabeu el significat d'una opció, deixeu-la com està.\n"
+"=> Avís, una etiqueta ha canviat:\n"
+"%s"
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Local Network adress"
-msgstr "Adreça de la xarxa local"
+msgid "Number of capture buffers:"
+msgstr "Nombre de memòries intermèdies de captura:"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Your choice? (0/1, default `%s') "
+msgstr "Quina és la vostra elecció? (0/1, predeterminat '%s')"
+
+#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
"\n"
-msgstr ""
-"Podeu conservar la configuració actual i assumir que ja heu definit un "
-"servidor DHCP. En aquest cas, verifiqueu que s'ha llegit correctament la "
-"xarxa de classe C que utilitzeu per a la vostra xarxa local. No es "
-"reconfigurarà ni es modificarà la configuració del servidor DHCP.\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
"\n"
-"L'entrada DNS per defecte és el servidor de noms amb memòria cau que s'ha "
-"configurat al tallafoc. Podeu substituir-lo, per exemple, per la IP del DNS "
-"del vostre proveïdor d'accés.\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
"\n"
-"Alternativament, podeu reconfigurar la interfície i (re)configurar un "
-"servidor DHCP per a ús propi.\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
"\n"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
msgstr ""
-"Configuració actual de '%s':\n"
+"Per poder-les utilitzar, cal formatar les particions que s'acaben de "
+"definir\n"
+"(la formatació consisteix a crear-hi un sistema de fitxers).\n"
"\n"
-"Xarxa: %s\n"
-"Adreça IP: %s\n"
-"Atribució IP: %s\n"
-"Controlador: %s"
+"En aquest punt, potser voldreu tornar a formatar algunes de les particions\n"
+"existents per eliminar les dades que contenen. Si és així, seleccioneu "
+"també\n"
+"aquestes particions.\n"
+"\n"
+"Tingueu en compte que no cal tornar a formatar totes les particions que ja\n"
+"existien; heu de tornar a formatar les particions que contenen el sistema\n"
+"operatiu (com ara \"/\", \"/usr\" o \"/var\"), però no les que contenen "
+"dades\n"
+"que voleu conservar (habitualment, \"/home\").\n"
+"\n"
+"Aneu amb compte en seleccionar les particions; després de la formatació, "
+"totes\n"
+"les dades s'hauran suprimit i no en podreu recuperar cap.\n"
+"\n"
+"Feu clic a \"D'acord\" quan estigueu a punt per formatar les particions.\n"
+"\n"
+"Feu clic a \"Cancel·la\" si voleu seleccionar una altra partició per "
+"instal·lar\n"
+"el nou sistema Mandrake Linux.\n"
+"\n"
+"Feu clic a \"Avançat\" si voleu que es busquin sectors defectuosos del disc "
+"en\n"
+"alguna de les particions."
-#
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "French"
+msgstr "Francès"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTY)"
+msgstr "Txec (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
#, fuzzy, c-format
-msgid "Current interface configuration"
-msgstr "Mostra la configuració actual de la interfície"
+msgid "Hardware probing in progress"
+msgstr "Detecció en procés"
-#
#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Net Device"
+msgstr "Servei Xinetd"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
-msgid "Show current interface configuration"
-msgstr "Mostra la configuració actual de la interfície"
+msgid "Summary"
+msgstr "Resum"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No (experts only)"
+msgid ""
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
+" (Ports Paral·lel: /dev/lp0, /dev/lp1, etc., equivalents a LPT1:, LPT2:, "
+"etc.; 1a impressora USB: /dev/usb/lp0, 2a impressora USB: /dev/usb/lp1, "
+"etc.)."
#
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Automatic reconfiguration"
-msgstr "Reconfiguració automàtica"
+msgid "Next"
+msgstr "Següent"
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
+#, c-format
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "No podeu instal·lar el carregador de l'arrencada a una partició %s\n"
+
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "CHAP"
+msgstr "CHAP"
+
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp)"
+
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
"\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
"\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
-"Avís: l'adaptador de xarxa (%s) ja està configurat.\n"
"\n"
-"Voleu fer una reconfiguració automàtica?\n"
+"Benvingut.\n"
"\n"
-"Ho podeu fer manualment però heu de saber què feu."
+"Els paràmetres de la instal·lació automàtica estan disponibles en les "
+"seccions de l'esquerra"
-#
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface already configured"
-msgstr "La intefície de xarxa ja està configurada"
+msgid "Puerto Rico"
+msgstr "Puerto Rico"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""
-"Si us plau, escolliu l'adaptador de xarxa que es connectarà a la vostra "
-"xarxa d'àrea local."
+"el paquet 'ImageMagick' és necessari per a un correcte funcionament.\n"
+"Feu clic a \"D'acord\" per intal·lar-lo o a \"Cancel·la\" per sortir"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "Lituà \"fila de números\" QWERTY"
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
-"%s\n"
"\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
msgstr ""
-"Només teniu un adaptador de xarxa configurat al sistema:\n"
+"Se suprimiran els següents paquets per poder actualitzar el sistema: %s\n"
"\n"
-"%s\n"
"\n"
-"Ara es configurarà la vostra xarxa d'àrea local amb aquest adaptador."
+"Voleu realment suprimir aquests paquets?\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface"
-msgstr "Interfície de la xarxa"
+msgid "Anguilla"
+msgstr "Anguilla"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "NIS Domain"
+msgstr "Domini del NIS"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
+"\n"
+"- User Files:\n"
msgstr ""
-"No s'ha detectat cap adaptador de xarxa ethernet al sistema. Si us plau, "
-"executeu l'eina de configuració de maquinari."
+"\n"
+"- Fitxers d'usuari:\n"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "No network adapter on your system!"
-msgstr "No teniu cap adaptador de xarxa al sistema!"
+msgid "Antarctica"
+msgstr "Antàrtida"
-#: ../../standalone/drakgw:1
+#
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Interface %s"
-msgstr "Interfície %s"
+msgid "Mount options"
+msgstr "Opcions de muntatge"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interfície %s (utilitzant el mòdul %s)"
+msgid "Jamaica"
+msgstr "Jamaica"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, fuzzy, c-format
-msgid "Net Device"
-msgstr "Servei Xinetd"
+msgid ""
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
+msgstr ""
+"Assigna els dispositius en cru (raw) a dispositius de blocs (tals com les "
+"particions de\n"
+"disc dur), perquè siguin utilitzats per aplicacions com ara Oracle"
-#: ../../standalone/drakgw:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Please enter the name of the interface connected to the internet.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+msgid "Please wait, preparing installation..."
+msgstr "Espereu si us plau, s'està preparant la instal·lació..."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTZ)"
+msgstr "Txec (QWERTZ)"
+
+#: ../../network/network.pm:1
+#, c-format
+msgid "Track network card id (useful for laptops)"
msgstr ""
-"Ara es configurarà l'ordinador per tal que comparteixi la connexió a "
-"Internet.\n"
-"Amb aquesta característica, altres ordinadors de la vostra xarxa local\n"
-"podran utilitzar la connexió a Internet d'aquest ordinador.\n"
-"\n"
-"Assegureu-vos d'haver configurat l'accés a Internet i a la xarxa local amb "
-"el drakconnect abans de continuar.\n"
-"Nota: per configurar una xarxa d'àrea local (LAN), us cal un adaptador de "
-"xarxa dedicat."
+"Fes el seguiment de l'identificador de la targeta de xarxa (d'utilitat per a "
+"portàtils)"
-#: ../../standalone/drakgw:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Connexió a Internet compartida"
+msgid "The port number should be an integer!"
+msgstr "El número de port ha de ser enter!"
-#: ../../standalone/drakgw:1
+#
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Ara, la connexió compartida a Internet està habilitada."
+msgid "You must choose an image file first!"
+msgstr "Abans heu de triar un fitxer d'imatge!"
-#: ../../standalone/drakgw:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Enabling servers..."
-msgstr "S'estan habilitant els servidors..."
+msgid "Restore from Hard Disk."
+msgstr "Restaura des del disc dur."
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "dismiss"
-msgstr "deixa-ho córrer"
+msgid "Add to LVM"
+msgstr "Afegeix a l'LVM"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "reconfigure"
-msgstr "torna a configurar"
+msgid "DNS server"
+msgstr "Servidor DNS"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "enable"
-msgstr "habilita"
+msgid "Trinidad and Tobago"
+msgstr "Trinitat i Tobago"
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La configuració de la connexió compartida a Internet ja s'ha dut a terme.\n"
-"Ara està inhabilitada.\n"
-"\n"
-"Què voleu fer?"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr "LPD i LPRng no funcionen amb impressores IPP.\n"
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "La connexió a Internet compartida està inhabilitada"
+msgid "simple"
+msgstr "senzill"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Ara, la compartició de la connexió a Internet està inhabilitada."
+msgid "Clear all"
+msgstr "Buida-ho tot"
-#: ../../standalone/drakgw:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disabling servers..."
-msgstr "S'estan inhabilitant els servidors..."
+msgid "No test pages"
+msgstr "Cap pàgina de prova"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "disable"
-msgstr "inhabilita"
+msgid "Adapter %s: %s"
+msgstr "Adaptador %s: %s"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
+msgid "Falkland Islands (Malvinas)"
+msgstr "Illes Malvines (Falkland)"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Unknown model"
+msgstr "Model desconegut"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check files/directories writable by everybody."
msgstr ""
-"La configuració de la connexió compartida a Internet ja s'ha dut a terme.\n"
-"Ara està habilitada.\n"
-"\n"
-"Què voleu fer?"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "authentication"
+msgstr "Autenticació"
+
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "La connexió a Internet compartida està habilitada"
+msgid "Backup Now"
+msgstr "Fes la còpia de seguretat"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
-msgstr "Només s'accepten nuclis de la sèrie 2.4."
+msgid "/_File"
+msgstr "/_Fitxer"
-#: ../../standalone/drakhelp:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
+msgstr "S'està suprimint la impressora d'Star Office/OpenOffice.org/GIMP"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
msgstr ""
+"Executa el filtratge de paquets per als nuclis Linux 2.2, per instal·lar\n"
+"un tallafoc que protegeixi el vostre ordinador d'atacs des de la xarxa."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Tamil (ISCII-layout)"
+msgstr "Tamil (TSCII)"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Path"
-msgstr "Camí"
+msgid "Mayotte"
+msgstr "Mayotte"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "group :"
-msgstr "grup :"
+msgid "Creating auto install floppy..."
+msgstr "S'està creant el diquet d'instal·lació automàtica"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Searching for scanners ..."
+msgstr "Impressores disponibles"
#
-#: ../../standalone/drakperm:1
-#, c-format
-msgid "user :"
-msgstr "usuari :"
+#: ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Partitioning"
+msgstr "Impressió"
-#: ../../standalone/drakperm:1
-#, c-format
-msgid "Path selection"
-msgstr "Selecció del camí"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Russia"
+msgstr "Rus"
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "when checked, owner and group won't be changed"
-msgstr "si ho marqueu, no es canviaran ni el propietari ni el grup"
+msgid "ethernet card(s) detected"
+msgstr "s'han detectat una o diverses targetes Ethernet"
-#: ../../standalone/drakperm:1
+#
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Use group id for execution"
-msgstr "Usa l'identificador del grup (GID) per a l'execució"
+msgid "Syslog"
+msgstr "Syslog"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use owner id for execution"
-msgstr "Usa l'identificador del propietari (UID) per a l'execució"
+msgid "Can't create catalog!"
+msgstr "No s'ha pogut crear el catàleg!"
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
msgstr ""
-"Usat per al directori:\n"
-" només el propietari del directori o del fitxer en aquest directori poden "
-"suprimir-lo"
-#: ../../standalone/drakperm:1
+#
+#: ../../fsedit.pm:1
#, c-format
-msgid "Set-GID"
-msgstr "Set-GID"
+msgid "Not enough free space for auto-allocating"
+msgstr "No hi ha prou espai per a l'assignació automàtica"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Set-UID"
-msgstr "Set-UID"
+msgid "Set root password"
+msgstr "Estableix la contrasenya de root"
-#: ../../standalone/drakperm:1
-#, c-format
-msgid "sticky-bit"
-msgstr "sticky-bit"
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
+msgstr ""
+"No hi ha cap controlador OSS/ALSA alternatiu conegut per a la vostra targeta "
+"de so (%s), que actualment fa servir \"%s\""
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Property"
-msgstr "Propietat"
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr ""
+"Després de canviar la mida de la partició %s, se'n perdran totes les dades"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Permissions"
-msgstr "Permisos"
+msgid "Internet connection configuration"
+msgstr "Configuració de la connexió a Internet"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Current user"
-msgstr "Usuari actual"
+msgid "Scanning for TV channels"
+msgstr "S'estan cercant canals de TV"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "browse"
-msgstr "navega"
+msgid "Kernel:"
+msgstr "Nucli: "
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Edit current rule"
-msgstr "Edita la regla actual"
+msgid "/_About..."
+msgstr "/_Quant a..."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "edit"
-msgstr "edita"
+msgid "Bengali"
+msgstr "Bengalí"
-#
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Delete selected rule"
-msgstr "Elimina la regla seleccionada"
+msgid "Preference: "
+msgstr "Preferència: "
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "delete"
-msgstr "suprimeix"
+msgid "Wizard..."
+msgstr "Auxiliar..."
-#
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "Add a new rule at the end"
-msgstr "Afegeix una regla nova al final"
+msgid "Services: %d activated for %d registered"
+msgstr "Serveis: %d activats per %d registrats"
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1
#, c-format
-msgid "add a rule"
-msgstr "afegeix una regla"
+msgid "Create a bootdisk"
+msgstr "Crea un disc d'arrencada"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Move selected rule down one level"
-msgstr "Baixa la regla actual un nivell"
+msgid "Solomon Islands"
+msgstr "Illes Salomó"
-#: ../../standalone/drakperm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Down"
-msgstr "Baixa"
+msgid "(module %s)"
+msgstr "(mòdul %s)"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Move selected rule up one level"
-msgstr "Puja la regla actual un nivell"
+msgid "Workgroup"
+msgstr "Grup de treball"
-#: ../../standalone/drakperm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Up"
-msgstr "Puja"
+msgid "Printer host name or IP"
+msgstr "Nom o IP de l'ordinador central de la impressora"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "select perm file to see/edit"
-msgstr "seleccioneu el fitxer perm que voleu veure/editar"
+msgid "Host Path or Module"
+msgstr "Camí de l'ordinador central o mòdul"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
+msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr ""
-"El Drakperm s'usa per veure els fitxers que es faran servir per ajustar els "
-"permisos, propietaris i grups a través de l'msec.\n"
-"També podeu editar les vostres pròpies regles, que sobreescriuran les regles "
-"predeterminades."
+"El nom de la impressora només pot constar de lletres, números i el caràcter "
+"de subratllat"
-#: ../../standalone/drakperm:1
+#
+#: ../../standalone/drakgw:1
#, c-format
-msgid "permissions"
-msgstr "permisos"
+msgid "Show current interface configuration"
+msgstr "Mostra la configuració actual de la interfície"
-#: ../../standalone/drakperm:1
+#: ../../help.pm:1
#, c-format
-msgid "group"
-msgstr "grup"
+msgid "Development"
+msgstr "Desenvolupament"
-#
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "user"
-msgstr "usuari"
+msgid "Done"
+msgstr "Fet"
-#: ../../standalone/drakperm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "path"
-msgstr "camí"
+msgid "Web Server"
+msgstr "Servidor Web"
-#
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "S'està creant el disquet d'instal·lació automàtica"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\tDo not include System Files\n"
+msgstr "\tNo incloguis els fitxers de sistema\n"
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
+msgid "Chile"
+msgstr "Xile"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
msgstr ""
+"Els controladors per a la inkjet proporcionats per Lexmark només funcionen "
+"amb impressores locals, i no amb impressores en ordinadors remots o "
+"servidors d'impressió. Si us plau, connecteu la vostra impressora a un port "
+"local o configureu-la en l'ordinador on està connectada."
-#
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "No image found"
-msgstr "No s'ha trobat cap impressora!"
-
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Installation image directory"
-msgstr "Xpmac (instal·lació del controlador de pantalla)"
-
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
"\n"
+"Do not use \"scannerdrake\" for this device!"
msgstr ""
+"El vostre dispositiu multifunció ha estat configurat automàticament per "
+"poder escanejar. Ara podeu escanejar amb \"scanimage\" (\"scanimage -d hp:%s"
+"\" per especificar l'escàner si n'hi ha més d'un) des de la línia d'ordres o "
+"amb les interfícies gràfiques \"xscanimage\" o \"xsane\". Si esteu "
+"utilitzant el GIMP, també podeu escanejar escollint el punt apropiat en el "
+"menú \"Fitxer\"/\"Adquireix\". Executeu \"man scanimage\" a la línia "
+"d'ordres per a més informació.\n"
+"\n"
+"No utilitzeu \"scannerdrake\" amb aquest dispositiu!"
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "The DHCP end ip"
-msgstr "L'adreça final del rang del DHCP"
-
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "The DHCP start ip"
-msgstr "L'adreça inicial del rang del DHCP"
-
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
-msgstr ""
+msgid "(already added %s)"
+msgstr "(ja s'ha afegit %s)"
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Interfície %s (utilitzant el mòdul %s)"
+#: ../../printer/main.pm:1
+#, c-format
+msgid ", using command %s"
+msgstr ", utilitzant l'ordre %s"
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr ""
-"Si us plau, seleccioneu quin adaptador de xarxa voleu utilitzar per\n"
-"connectar-vos a Internet."
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Alt and Shift keys simultaneously"
+msgstr "Tecles d'Alternativa i de Majúscules simultàniament"
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Flags"
msgstr ""
-"Ara es configurarà l'ordinador per tal que comparteixi la connexió a "
-"Internet.\n"
-"Amb aquesta característica, altres ordinadors de la vostra xarxa local\n"
-"podran utilitzar la connexió a Internet d'aquest ordinador.\n"
-"\n"
-"Assegureu-vos d'haver configurat l'accés a Internet i a la xarxa local amb "
-"el drakconnect abans de continuar.\n"
-"Nota: per configurar una xarxa d'àrea local (LAN), us cal un adaptador de "
-"xarxa dedicat."
-#
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Installation Server Configuration"
-msgstr "Configuració del servidor dhcpd"
-
-#
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "PXE Server Configuration"
-msgstr "Configuració del servidor dhcpd"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Add/Del Users"
+msgstr "Afegeix/Suprimeix usuaris"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please wait, setting security options..."
-msgstr "Espereu si us plau, s'estan configurant les opcions de seguretat..."
+msgid "Host/network IP address missing."
+msgstr ""
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please wait, setting security level..."
-msgstr "Espereu si us plau, s'està configurant el nivell de seguretat..."
+msgid "weekly"
+msgstr "setmanal"
-#: ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Periodic Checks"
-msgstr "Comprovacions periòdiques"
+msgid "Settings"
+msgstr "Paràmetres"
-#
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "System Options"
-msgstr "Opcions de sistema"
+msgid "The entered host/network IP is not correct.\n"
+msgstr ""
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Here is the full list of available countries"
+msgstr "Aquesta és la llista completa de teclats disponibles"
#
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Network Options"
-msgstr "Opcions de xarxa"
+msgid "Alternative test page (A4)"
+msgstr "Pàgina de prova alternativa (A4)"
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
+#: ../../install_steps_interactive.pm:1
+#, c-format
msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
-"Les opcions següents es poden modificar per personalitzar la seguretat\n"
-"del vostre sistema. Feu clic a \"Ajuda\" si voleu més informació.\n"
+"Si teniu tots els CD de la llista de sota, feu clic a 'D'acord'.\n"
+"Si no teniu cap d'aquests CD, feu clic a 'Cancel·la'.\n"
+"Si només falten alguns CD, desseleccioneu-los i feu clic a 'D'acord'."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Security Administrator:"
-msgstr "Administrador de seguretat:"
+msgid "Wait please"
+msgstr "Espereu si us plau"
-#
-#: ../../standalone/draksec:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Security Alerts:"
-msgstr "Alarmes de seguretat:"
+msgid "PAP"
+msgstr "PAP"
#
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Security Level:"
-msgstr "Nivell de seguretat:"
+msgid "Backup user files"
+msgstr "Còpia de seguretat dels fitxers d'usuari"
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "(default value: %s)"
-msgstr " (per defecte: %s)"
+#: ../../diskdrake/dav.pm:1
+#, c-format
+msgid "New"
+msgstr "Nou"
-#: ../../standalone/draksec:1
+#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-" to the Internet as a client.\n"
-"\n"
-"High: There are already some restrictions, and more automatic checks "
-"are run every night.\n"
-"\n"
-"Higher: The security is now high enough to use the system as a server "
-"which can accept\n"
-" connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-" should choose a lower level.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
"\n"
-"Paranoid: This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-" features are at their maximum\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
"\n"
-"Security Administrator:\n"
-" If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-" email)"
-msgstr ""
-"Estàndard: Aquesta és la seguretat estàndard recomanada per a un ordinador "
-"que es connectarà a Internet com a client.\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
"\n"
-"Alta: Hi ha algunes restriccions, i cada nit s'executen més tests que "
-"al nivell estàndard.\n"
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
"\n"
-"Més alta: La seguretat és prou elevada perquè el sistema funcioni com a "
-"servidor que pugui acceptar connexions de diversos clients. Si aquesta "
-"màquina només serà un client a Internet, hauríeu de triar un nivell més "
-"baix.\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
"\n"
-"Paranoic: Similar al nivell anterior, però el sistema es tanca completament "
-"i les característiques de seguretat estan al màxim\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
"\n"
-"Administrador de seguretat:\n"
-" Si les \"Alarmes de seguretat\" estan activades, s'enviaran a "
-"aquest usuari (nom d'usuari o adreça electrònica)"
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
+msgstr ""
+"Aquesta és la decisió més important quant a la seguretat del vostre sistema\n"
+"GNU/Linux: heu d'introduir la contrasenya de l'usuari \"root\". El \"root\" "
+"és\n"
+"l'administrador del sistema i és l'únic autoritzat a fer actualitzacions,\n"
+"afegir usuaris, canviar la configuració del tot el sistema, etc. De fet,\n"
+"el \"root\" pot fer de tot! Per això heu d'escollir una contrasenya que "
+"sigui\n"
+"dificil d'endevinar. DrakX us avisarà si és massa fàcil. Com veieu, podeu \n"
+"optar per no introduir cap contrasenya, però no és gens prudent per una\n"
+"única raó: el fet d'arrencar GNU/Linux no fa que els vostres altres "
+"\"sistemes\n"
+"operatius\" estiguin lliures d'errors. Com que l'usuari \"root\" pot "
+"superar\n"
+"totes les limitacions i esborrar accidentalment totes les dades de "
+"qualsevol\n"
+"partició com a conseqüència d'accedir sense precaucions a les particions en "
+"si,\n"
+"és molt important que sigui difícil esdevenir \"root\".\n"
"\n"
+"La contrasenya hauria de ser una mescla de caràcters alfanumèrics i, com a \n"
+"mínim, de 8 caràcters de longitud. No escrigueu mai la contrasenya de \"root"
+"\"\n"
+"ja que és molt fàcil comprometre el sistema si ho feu.\n"
"\n"
+"De totes maneres, no feu la contrasenya massa llarga o complicada perquè\n"
+"heu de ser capaços de recordar-la sense gaire esforç.\n"
"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
-msgstr ""
+"La contrasenya no es mostrarà per pantalla quan la teclegeu. Per tant, \n"
+"haureu d'escriure-la dues vegades per reduir la probabilitat d'errors\n"
+"en l'escriptura. Si, malauradament, feu el mateix error dues vegades, "
+"haureu\n"
+"d'usar aquesta contrasenya \"incorrecta\" el primer cop que us connecteu.\n"
"\n"
+"En el mode Expert, se us preguntarà si us voleu connectar a un servidor\n"
+"d'autentificació, com ara NIS o LDAP.\n"
"\n"
+"Si la vostra xarxa usa LDAP, NIS o l'autenticació de domini Windows PDC,\n"
+"seleccioneu l'opció corresponent com a autenticació. Si no ho sabeu, "
+"pregunteu\n"
+"al vostre administrador de la xarxa.\n"
"\n"
-"Nota: si teniu una targeta de so ISA PnP, haureu de fer servir el programa "
-"sndconfig. Només cal que teclegeu \"sndconfig\" a la consola."
+"Si el vostre ordinador no es connecta a cap xarxa administrada, haureu \n"
+"d'escollir \"Fitxers Locals\" per a l'autenticació."
-#: ../../standalone/draksound:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"If you do not know what to choose, stay with the default option."
msgstr ""
-"No s'ha detectat cap targeta de so en el vostre ordinador. Si us plau, "
-"verifiqueu que teniu correctament inserida una targeta de so compatible amb "
-"Linux.\n"
-"\n"
-"\n"
-"Podeu visitar la nostra base de dades de maquinari a:\n"
+"Ara és el moment de triar el nivell de seguretat desitjat per a la màquina.\n"
+"Com a norma general, com més s'exposa un ordinador i com més vitals són les\n"
+"dades que s'hi emmagatzemen, més alt ha de ser el nivell de seguretat.\n"
+"Tanmateix, un nivell alt de seguretat sovint comporta una disminució de la\n"
+"facilitat d'ús. Consulteu el capítol \"msec\" del \"Manual de Referència\"\n"
+"per obtenir més informació sobre el significat dels nivells de seguretat.\n"
"\n"
+"Si no sabeu quin escollir, deixeu l'opció per defecte."
+
+#
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Load from floppy"
+msgstr "Carrega des del disquet"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The following printer was auto-detected. "
+msgstr ""
+"Les impressores següents\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../standalone/draksound:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "No Sound Card detected!"
-msgstr "No s'ha detectat cap targeta de so!"
+msgid "Boot Floppy"
+msgstr "Disquet d'arrencada"
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "%s BootSplash (%s) preview"
-msgstr "Vista prèvia del BootSplash %s (%s)"
+msgid "Norwegian"
+msgstr "Noruec"
-#
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Searching for new scanners ..."
+msgstr "Impressores disponibles"
+
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Generating preview ..."
-msgstr "S'està generant la vista prèvia..."
+msgid "Apache World Wide Web Server"
+msgstr "Servidor World Wide Web Apache"
-#
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You must choose an image file first!"
-msgstr "Abans heu de triar un fitxer d'imatge!"
+msgid "stepping of the cpu (sub model (generation) number)"
+msgstr ""
-#
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "ProgressBar color selection"
-msgstr "Selecció del color de la barra de progrés"
+msgid "select path to restore (instead of /)"
+msgstr "seleccioneu el camí al qual restaurar (en comptes de /)"
#: ../../standalone/draksplash:1
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
-msgstr ""
-"Aquest tema encara no té cap pantalla de presentació de l'arrencada en %s!"
+msgid "Configure bootsplash picture"
+msgstr "Configura la imatge de presentació de l'arrencada"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "saving Bootsplash theme..."
-msgstr "s'està desant el tema Bootsplash..."
+msgid "China"
+msgstr "Xina"
#
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "choose image file"
-msgstr "trieu un fitxer d'imatge"
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr ""
+" (Assegureu-vos que totes les impressores estan connectades i engegades.)\n"
-#
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Georgia"
+msgstr "Geòrgia"
+
+#: ../../standalone/printerdrake:1
#, fuzzy, c-format
-msgid "choose image"
-msgstr "trieu un fitxer d'imatge"
+msgid "Reading data of installed printers..."
+msgstr "Impressores disponibles"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configure bootsplash picture"
-msgstr "Configura la imatge de presentació de l'arrencada"
+msgid " Erase Now "
+msgstr " Esborra'l ara"
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Make kernel message quiet by default"
-msgstr "Fes que, per defecte, no apareguin els missatges del nucli"
+msgid "server"
+msgstr "servidor"
-#: ../../standalone/draksplash:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Display logo on Console"
-msgstr "Mostra el logotip a la consola"
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "Inseriu un disquet formatat amb FAT a la unitat %s"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Choose color"
-msgstr "Escolliu un color"
+msgid "yes means the processor has an arithmetic coprocessor"
+msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Save theme"
-msgstr "Desa el tema"
+msgid "Please Wait... Applying the configuration"
+msgstr "Espereu si us plau... s'està aplicant la configuració"
-#: ../../standalone/draksplash:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "Preview"
-msgstr "Vista prèvia"
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Benvingut al GRUB, el selector de sistema operatiu!"
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "the color of the progress bar"
-msgstr "el color de la barra de progrés"
+msgid "Grub"
+msgstr "Grub"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "the height of the progress bar"
-msgstr "l'alçària de la barra de progrés"
+msgid "SCSI controllers"
+msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "the width of the progress bar"
-msgstr "l'amplada de la barra de progrés"
+msgid " on LPD server \"%s\", printer \"%s\""
+msgstr " en servidor LPD \"%s\", impressora \"%s\""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
+msgid "Choosing a display manager"
msgstr ""
-"coordenada y de la cantonada superior\n"
-"esquerra de la barra de progrés"
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Zeroconf Host name"
+msgstr "Nom de l'ordinador central"
+
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
+msgid "IP address should be in format 1.2.3.4"
+msgstr "L'adreça IP ha d'estar en format 1.2.3.4"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Ecuador"
+msgstr "Equador"
+
+#
+#: ../../standalone/drakautoinst:1
+#, c-format
+msgid "Add an item"
+msgstr "Afegeix un element"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The printers on this machine are available to other computers"
msgstr ""
-"coordenada x de la cantonada superior\n"
-"esquerra de la barra de progrés"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "text box height"
-msgstr "alçària de la caixa de text"
+msgid "I can't find needed image file `%s'."
+msgstr "No he trobat el fitxer d'imatge necessari `%s'."
-#: ../../standalone/draksplash:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "text width"
-msgstr "amplada del text"
+msgid "No sound card detected. Try \"harddrake\" after installation"
+msgstr ""
+"No s'ha detectat cap targeta de so. Proveu amb \"harddrake\" després de la "
+"instal·lació"
-#: ../../standalone/draksplash:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"y coordinate of text box\n"
-"in number of characters"
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
msgstr ""
-"coordenada y de la caixa de text\n"
-"en nombre de caràcters"
+"El port introduït no és vàlid: %s.\n"
+"El format correcte és \"port/tcp\" o \"port/udp\", \n"
+"on el port es troba entre 1 i 65535."
-#: ../../standalone/draksplash:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
+msgid "Shell"
+msgstr "Shell"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "PCI"
+msgstr "PCI"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Sao Tome and Principe"
+msgstr "Sao Tome i Príncipe"
+
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Can't login using username %s (bad password?)"
msgstr ""
-"coordenada x de la caixa de text\n"
-"en nombre de caràcters"
+"No es pot entrar amb el nom d'usuari %s (potser la contrasenya és "
+"incorrecta?)"
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Browse"
-msgstr "Navega"
+msgid "Azerbaidjani (latin)"
+msgstr "Azerbaidjanès (llatí)"
-#: ../../standalone/draksplash:1
+#
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Package not installed"
+msgstr "No instal·lat"
+
+#
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Theme name"
-msgstr "Nom del tema"
+msgid "Become a MandrakeExpert"
+msgstr "Esdeveniu un MandrakeExpert"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "final resolution"
-msgstr "resolució definitiva"
+msgid "American Samoa"
+msgstr "Samoa Americana"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "first step creation"
-msgstr "creació del primer pas"
+msgid "Protocol"
+msgstr "Protocol"
-#: ../../standalone/draksplash:1
+#
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgid "Copy fonts on your system"
+msgstr "Copiar les fonts en el vostre sistema"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Harddrake help"
+msgstr "Ajuda del Harddrake"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Bogomips"
msgstr ""
-"el paquet 'ImageMagick' és necessari per a un correcte funcionament.\n"
-"Feu clic a \"D'acord\" per intal·lar-lo o a \"Cancel·la\" per sortir"
-#: ../../standalone/drakxtv:1
+#
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Mandrake Terminal Server Configuration"
+msgstr "Configuració del Servidor de Terminal de Mandrake"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
"\n"
-"You can visit our hardware database at:\n"
+" DrakBackup Report Details\n"
"\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-"No s'ha detectat cap targeta de TV en el vostre ordinador. Si us plau "
-"verifiqueu que teniu correctament inserida una targeta de Vídeo/TV "
-"compatible amb Linux.\n"
-"\n"
"\n"
-"Podeu visitar la nostra base de dades de maquinari a:\n"
+" Detalls de l'Informe del DrakBackup\n"
"\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No TV Card detected!"
-msgstr "No s'ha detectat cap targeta de TV!"
+msgid "Restore all backups"
+msgstr "Restaura totes les còpies de seguretat"
-#: ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "Ara, podeu executar xawtv (sota X Window!) !\n"
+msgid "if set to yes, check open ports."
+msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Have a nice day!"
-msgstr "Tingueu un bon dia!"
+msgid "This may take a moment to erase the media."
+msgstr "Esborrar el suport pot trigar una estona."
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "XawTV isn't installed!"
-msgstr "No teniu instal·lat XawTV!"
+msgid "You can't select/unselect this package"
+msgstr "No podeu seleccionar/desseleccionar aquest paquet"
-#
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "S'ha produït un error en cercar els canals de TV"
+msgid "Warning"
+msgstr "Advertència"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Scanning for TV channels"
-msgstr "S'estan cercant canals de TV"
+msgid ""
+"\n"
+"- Other Files:\n"
+msgstr ""
+"\n"
+"- Altres fitxers:\n"
-#: ../../standalone/drakxtv:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Scanning for TV channels in progress ..."
-msgstr "La cerca de canals de TV està en progrés..."
+msgid "Remote host name"
+msgstr "Nom de l'ordinador central remot"
-#: ../../standalone/drakxtv:1
+#
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Area:"
-msgstr "Àrea:"
+msgid "deactivate now"
+msgstr "Desactiva'l ara"
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "TV norm:"
-msgstr "Normativa de TV:"
+msgid "access to X programs"
+msgstr "accés a programes X"
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Si us plau,\n"
-"entreu la vostra normativa de tv i el país"
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "Computing the size of the Windows partition"
+msgstr "Utilitza l'espai lliure de la partició de Windows"
+#
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#: ../../standalone/drakxtv:1
#, c-format
-msgid "Australian Optus cable TV"
-msgstr "TV per cable australiana Optus"
+msgid "Italy"
+msgstr "Itàlia"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Newzealand"
-msgstr "Nova Zelanda"
+msgid "Name of printer"
+msgstr "Nom de la impressora"
-#
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "France [SECAM]"
-msgstr "França [SECAM]"
+msgid "disable"
+msgstr "inhabilita"
-#
-#: ../../standalone/drakxtv:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "East Europe"
-msgstr "Europa de l'Est"
+msgid "error unmounting %s: %s"
+msgstr "s'ha produït un error en desmuntar %s: %s"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "West Europe"
-msgstr "Europa de l'Oest"
+msgid "Do it!"
+msgstr "Fes-ho!"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "China (broadcast)"
-msgstr "Xina (difusió)"
+msgid "Cayman Islands"
+msgstr "Illes Caiman"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Japan (cable)"
-msgstr "Japó (cable)"
+msgid "%s not responding"
+msgstr "%s no respon"
-#: ../../standalone/drakxtv:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Japan (broadcast)"
-msgstr "Japó (difusió)"
+msgid "Select model manually"
+msgstr "Selecciona el model manualment"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Canada (cable)"
-msgstr "Canadà (cable)"
+msgid "Format"
+msgstr "Formata"
-#: ../../standalone/drakxtv:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "USA (cable-hrc)"
-msgstr "EUA (cable-hrc)"
+msgid ""
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
+msgstr ""
+"La manera més habitual de connectar amb ADSL és pppoe.\n"
+"Algunes connexions utilitzen pptp, unes poques utilitzen dhcp.\n"
+"Si no ho sabeu, escolliu 'utilitza pppoe'"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "USA (cable)"
-msgstr "EUA (cable)"
+msgid "Various"
+msgstr "Diversos"
-#: ../../standalone/drakxtv:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "USA (broadcast)"
-msgstr "EUA (difusió)"
+msgid "Zip"
+msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"XawTV isn't installed!\n"
"\n"
"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
msgstr ""
-"No teniu instal·lat el XawTV!\n"
-"\n"
-"\n"
-"Si teniu una targeta de TV però el DrakX no l'ha detectada (no hi ha el "
-"mòdul\n"
-"bttv o el saa7134 a \"/etc/modules\") o no heu instal·lat xawtv,\n"
-"si us plau envieu els resultats de \"lspcidrake -v -f\"\n"
-"a \"install\\@mandrakesoft.com\" amb l'assumpte \"undetected TV card\".\n"
-"\n"
-"\n"
-"El podeu instal·lar teclejant \"urpmi xawtv\" com a root, en la consola."
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "primary"
-msgstr "primari"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "secondary"
-msgstr "secundari"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Click on a device in the left tree in order to display its information here."
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
msgstr ""
+"\n"
+"Marqueu les impressores que voleu transferir i feu clic a \n"
+"\"Transfereix\"."
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Unknown"
-msgstr "Model desconegut"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "unknown"
-msgstr "Model desconegut"
+#: ../../printer/data.pm:1
+#, c-format
+msgid "PDQ"
+msgstr "PDQ"
-#: ../../standalone/harddrake2:1
+#
+#: ../../keyboard.pm:1
#, c-format
-msgid "Running \"%s\" ..."
-msgstr "S'està executant \"%s\"..."
+msgid "Albanian"
+msgstr "Albanès"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Run config tool"
-msgstr "Executa l'eina de configuració"
+msgid "Lithuania"
+msgstr "Lituània"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "Configure module"
-msgstr "Configura el mòdul"
+msgid "Compact"
+msgstr "Compacte"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Information"
-msgstr "Informació"
+msgid "Detected model: %s %s"
+msgstr "Model detectat: %s %s"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Detected hardware"
-msgstr "S'ha detectat el següent maquinari"
+msgid "MandrakeSoft has selected the best software for you"
+msgstr ""
#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid ""
+"This is HardDrake, a Mandrake hardware configuration tool.\n"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
+msgstr ""
+"Aquest és el HardDrake, l'eina de configuració de maquinari de Mandrake.\n"
+"Versió:"
+
+#
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Harddrake2 version "
-msgstr "Versió del Harddrake2 "
+msgid "Local files"
+msgstr "Fitxers locals"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Detection in progress"
-msgstr "Detecció en procés"
+msgid "maybe"
+msgstr "potser"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Author:"
-msgstr "Autor:"
+msgid "Panama"
+msgstr "Panamà"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
msgstr ""
-"Aquest és el HardDrake, l'eina de configuració de maquinari de Mandrake.\n"
-"Versió:"
+"Sembla que la vostra targeta gràfica té un connector TV-OUT.\n"
+"Pot configurar-se de manera que faci servir memòria d'imatge.\n"
+"\n"
+"A tal efecte, heu de connectar la targeta gràfica al televisor abans "
+"d'arrencar l'ordinador.\n"
+"Llavors, escolliu l'opció \"TVout\" en el carregador de l'arrencada\n"
+"\n"
+"Teniu aquesta característica?"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "About Harddrake"
-msgstr "Quant al Harddrake"
+msgid "Monitor"
+msgstr "Monitor"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/_About..."
-msgstr "/_Quant a..."
+msgid ""
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
+"Ara es configurarà la impressió cap a un usuari de Windows amb contrasenya. "
+"Degut a una fallada en l'arquitectura del programari del client Samba la "
+"contrasenya es mostra en text clar en la línia d'ordres que el client Samba "
+"utilitza per transmetre i imprimir un treball en el Servidor Windows. Per "
+"tant, és possible per qualsevol usuari d'aquell ordinador de veure la "
+"contrasenya en la pantalla simplement escrivint ordres tals com \"ps auxwww"
+"\".\n"
+"\n"
+"Us recomanem que utilitzeu alguna de les següents alternatives (en tots el "
+"casos heu d'estar segur que només els ordinadors de la vostra xarxa local "
+"tenen accés al vostre Servidor Windows, per exemple utilitzant un "
+"tallafoc):\n"
+"\n"
+"Utilitzeu un compte sense contrasenya en el Servidor Windows, tal com \"GUEST"
+"\" o un compte especial dedicat a la impressió. No tragueu la protecció de "
+"la contrasenya d'un compte personal o del compte de l'administrador.\n"
+"\n"
+"Configureu el vostre Servidor Windows fent que la impressora estigui "
+"disponible a través del protocol LPD. Aleshores, definiu en el Printerdrake "
+"la impressió en aquest ordinador amb el tipus de connexió \"%s\".\n"
+"\n"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "/_Report Bug"
-msgstr "/_Informeu d'un error"
+msgid "65 thousand colors (16 bits)"
+msgstr "65.536 colors (16 bits)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"\n"
+"- Save on Hard drive on path: %s\n"
msgstr ""
+"\n"
+"- Desa-ho en el disc dur en el camí: %s\n"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Size: %d KB\n"
+msgstr "Mida: %d kB\n"
#
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Select a device !"
-msgstr "Seleccioneu un escàner"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Remove fonts on your system"
+msgstr "Esborra fonts del sistema"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Description of the fields:\n"
+"Warning, the network adapter (%s) is already configured.\n"
"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
msgstr ""
-"Descripció dels camps:\n"
+"Avís: l'adaptador de xarxa (%s) ja està configurat.\n"
+"\n"
+"Voleu fer una reconfiguració automàtica?\n"
"\n"
+"Ho podeu fer manualment però heu de saber què feu."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Harddrake help"
-msgstr "Ajuda del Harddrake"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/_Fields description"
-msgstr "Descripció"
+msgid "Graphical interface at startup"
+msgstr "Interfície gràfica a l'inici"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/_Help"
-msgstr "/_Ajuda"
+msgid "Please enter the directory to save:"
+msgstr "Si us plau, introduïu el directori on voleu desar-ho:"
#: ../../standalone/harddrake2:1
#, c-format
-msgid "/_Quit"
-msgstr "/_Surt"
-
-#
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "Detectada automàticament"
+msgid "format of floppies supported by the drive"
+msgstr ""
-#
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _modems"
-msgstr "Detectada automàticament"
+#: ../../raid.pm:1
+#, c-format
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "No hi ha prou particions per al nivell RAID %d\n"
#
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _printers"
-msgstr "Detectada automàticament"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
+msgstr ""
+"Les impressores següents estan configurades. Feu doble clic en una "
+"impressora per modificar-ne els paràmetres, per fer-la la impressora per "
+"defecte o per veure la informació de la impressora."
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "/_Options"
-msgstr "/_Opcions"
+msgid "Connected"
+msgstr "Connectat"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "the vendor name of the processor"
-msgstr "el nom del venedor del dispositiu"
+msgid "USB printer \\#%s"
+msgstr "Impressora USB \\/*%s"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "the vendor name of the device"
-msgstr "el nom del venedor del dispositiu"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "Si us plau, seleccioneu el port sèrie a què està connectat el ratolí."
+msgid "Macedonian"
+msgstr "Macedoni"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
+msgid "Bridges and system controllers"
msgstr ""
-#
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Model stepping"
-msgstr "paràmetre de càrrega"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "the number of the processor"
-msgstr "el color de la barra de progrés"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "/File/_Save"
+msgstr "/Fitxer/De_sa"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Processor ID"
-msgstr ""
+msgid "Mali"
+msgstr "Mali"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, fuzzy, c-format
-msgid "network printer port"
-msgstr ", impressora de xarxa \"%s\", port %s"
+msgid "No details"
+msgstr "Detalls"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "the name of the CPU"
-msgstr "el nom del venedor del dispositiu"
+#: ../../pkgs.pm:1
+#, c-format
+msgid "very nice"
+msgstr "molt bonic"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Name"
-msgstr "Nom: "
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "Preview"
+msgstr "Vista prèvia"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "the number of buttons the mouse has"
-msgstr "el color de la barra de progrés"
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Remote Control"
+msgstr "Control Remot"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Number of buttons"
-msgstr "Nombre de botons"
+msgid "Please select media for backup..."
+msgstr "Si us plau seleccioneu el suport per a la còpia..."
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Official vendor name of the cpu"
-msgstr "el nom del venedor del dispositiu"
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "XFree86 server: %s\n"
+msgstr "Servidor XFree86: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Model name"
-msgstr "Nom del mòdul"
+msgid "Allow Thin Clients"
+msgstr "Afegeix/Suprimeix clients"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
-msgstr ""
+msgid "Georgian (\"Russian\" layout)"
+msgstr "Georgià (disposició \"russa\")"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Model"
-msgstr "Model"
+msgid "/_Options"
+msgstr "/_Opcions"
-#: ../../standalone/harddrake2:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "hard disk model"
-msgstr "model de disc dur"
+msgid "Your printer model"
+msgstr "El model de la vostra impressora"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "class of hardware device"
-msgstr "tipus de dispositiu de maquinari"
+msgid ""
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
+msgstr ""
+"\n"
+"\n"
+"(COMPTE! Esteu utilitzant XFS per la vostra partició arrel,\n"
+"la creació d'un disquet d'arrencada amb un de 1.44 MB molt probablement "
+"fallarà,\n"
+"perquè XFS necessita una unitat molt gran)."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Media class"
-msgstr "Tipus de mitjà"
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
+msgstr ""
+"\n"
+"- Suprimeix el arxius tar del disc dur en acabar.\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Sub generation of the cpu"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
msgstr ""
-#: ../../standalone/harddrake2:1
+#
+#: ../../share/advertising/04-configuration.pl:1
#, fuzzy, c-format
-msgid "Level"
-msgstr "nivell"
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "Configuració del Servidor de Terminal de Mandrake"
-#: ../../standalone/harddrake2:1
+#
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Format of floppies supported by the drive"
-msgstr ""
+msgid "Save"
+msgstr "Desa"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Floppy format"
-msgstr "Formata"
+msgid "The %s is unsupported"
+msgstr "Aquest escàner %s no és suportat"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
-msgstr ""
+msgid "Load the drivers for your usb devices."
+msgstr "Carrega els controladors per a dispositius USB."
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Halt bug"
-msgstr ""
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Disk"
+msgstr "Danès"
-#: ../../standalone/harddrake2:1
+#
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
+msgid "Enter a printer device URI"
+msgstr "Entreu un dispositiu URI d'impressora"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "F00f bug"
+msgid ""
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
msgstr ""
+"L'èxit de MandrakeSoft es basa en els principis del Codi Font Obert. El "
+"vostre nou sistema operatiu és el resultat del treball en col·laboració de "
+"la Comunitat Linux de tot el món"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
+msgid "Israel"
+msgstr "Israel"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr ""
+msgid "French Guiana"
+msgstr "Guaiana Francesa"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr ""
+msgid "default:LTR"
+msgstr "default:LTR"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Is FPU present"
-msgstr ""
+msgid "add a rule"
+msgstr "afegeix una regla"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "A command line must be entered!"
+msgstr "Heu d'entrar un URI vàlid!"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Fdiv bug"
-msgstr ""
+msgid "Select user manually"
+msgstr "Seleccioneu l'usuari manualment"
-#: ../../standalone/harddrake2:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr ""
+msgid "Transfer printer configuration"
+msgstr "Configuració de la transferència de la impressió"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Flags"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "Voleu habilitar la impressió a les impressores anteriors?\n"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
msgstr ""
+"Per tal que funcioni en un W2K PDC, segurament haureu de fer que "
+"l'administrador executi \"C:\\>net localgroup 'Accés compatible amb vesions "
+"anteriors a Windows 2000' everyone /add\" i que reiniciï el servidor.\n"
+"També necessitareu el nom d'usuari i la contrasenya de l'administrador del "
+"domini per poder connectar la màquina al domini de Windows(TM).\n"
+"Si la xarxa encara no està operativa, el DrakX provarà de connectar-se al "
+"domini després del pas de configuració de la xarxa.\n"
+"Si aquesta configuració fallés per algun motiu i l'autenticació no "
+"funcionés, executeu 'smbpasswd -j DOMINI -U USUARI%CONTRASENYA' passant com "
+"a paràmetres el domini Windows en qüestió i el nom d'usuari i la contrasenya "
+"de l'administrador, després que arrenqui el sistema.\n"
+"L'ordre 'wbinfo -t' comprovarà si els secrets de l'autenticació són prou "
+"bons."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "%s (Port %s)"
+msgstr "Port"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr "el mòdul del nucli GNU/Linux que gestiona aquest dispositiu"
+msgid "Use network connection to backup"
+msgstr "Empra la connexió de xarxa per fer la còpia de seguretat"
-#: ../../standalone/harddrake2:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Module"
-msgstr "Mòdul"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr "nou nom de dispositiu dinàmic generat pel devfs intern del nucli"
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
+"Ha arribat el moment d'especificar quins programes voleu instal·lar en el\n"
+"sistema. Hi ha milers de paquets en el Mandrake Linux, i no se suposa que\n"
+"els conegueu tots de memòria.\n"
+"\n"
+"Si esteu fent una instal·lació estàndar des del CD-ROM, primer se us "
+"demanarà\n"
+"que especifiqueu els CD que teniu (només en mode Expert). Comproveu les "
+"etiquetes\n"
+"dels CD i marqueu els quadres corresponents als CD que teniu per fer la\n"
+"instal·lació. Cliqueu \"D'acord\" quan vulgueu continuar.\n"
+"\n"
+"Els paquets estan ordenats en grups que corresponen a un ús particular de "
+"la\n"
+"màquina. Els grups també estan ordenats en quatre seccions:\n"
+"\n"
+" * \"Estació de treball\": si voleu utilitzar l'ordinador com a estació de \n"
+"treball, seleccioneu un o més grups dels corresponents;\n"
+"\n"
+" * \"Desenvolupament\": si la vostra màquina s'ha d'utilitzar per "
+"programar,\n"
+"escolliu el(s) grup(s) desitjat(s);\n"
+"\n"
+" * \"Servidor\": si l'ordinador s'ha d'utilitzar com a servidor, serà "
+"possible\n"
+"de seleccionar els serveis més habituals que voleu instal·lar en la vostra\n"
+"màquina;\n"
+"\n"
+" * \"Entorn Gràfic\": finalment, aquí és on escollireu quin és el vostre\n"
+"entorn gràfic preferit. Heu de seleccionar com a mínim un entorn gràfic si\n"
+"voleu tenir una estació de treball gràfica.\n"
+"\n"
+"Moure el cursor per sobre d'un nom de grup farà que es mostri una breu "
+"explicació\n"
+"d'aquest grup. Si desmarqueu tots els grups quan estigueu fent una "
+"instal·lació\n"
+"des de zero (en contraposició a una actualització), se us presentarà un "
+"diàleg \n"
+"proposant-vos diferents opcions per a una instal·lació mínima:\n"
+"\n"
+" * \"Amb X\": instal·lar els mínims paquets necessaris per tenir un entorn "
+"gràfic\n"
+"funcional;\n"
+"\n"
+" * \"Amb Documentació Bàsica\": instal·lar el sistema base i les utilitats "
+"bàsiques\n"
+"amb la seva documentació. Aquesta instal·lació és adequada per configurar un "
+"sistema\n"
+"servidor;\n"
+"\n"
+" * \"Instal·lació Realment Mínima\": s'instal·larà el mínim necessari per "
+"tenir un\n"
+"sistema Linux operatiu, només amb línia d'ordres. Aquesta instal·lació "
+"ocupa\n"
+"uns 65MB.\n"
+"\n"
+"Podeu marcar la casella de \"Selecció individual de paquets\", que és força "
+"útil si\n"
+"coneixeu els diversos paquets que s'ofereixen per instal·lar o si voleu "
+"tenir\n"
+"control total sobre el que s'instal·larà.\n"
+"\n"
+"Si heu començat la instal·lació en el mode \"Actualització\", podeu "
+"desmarcar \n"
+"tots els grups si voleu evitar que s'instal·li cap paquet nou. Això és "
+"útil \n"
+"per reparar o actualitzar un sistema existent."
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "New devfs device"
-msgstr "Nou dispositiu devfs"
+msgid "Accept user"
+msgstr "Accepta l'usuari"
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, c-format
-msgid "old static device name used in dev package"
-msgstr "nom antic de dispositiu estàtic, usat en el paquet de desenvolupament"
+msgid "Server"
+msgstr "Servidor"
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Old device file"
-msgstr "Fitxer de dispositiu antic"
+msgid "Bad choice, try again\n"
+msgstr "Elecció incorrecta, torneu-ho a intentar\n"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "This field describes the device"
-msgstr "aquest camp descriu el dispositiu"
+msgid "Heard and McDonald Islands"
+msgstr "Illa Heard i Illes McDonald"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
-msgstr ""
+msgid "No alternative driver"
+msgstr "No hi ha cap controlador alternatiu"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Frequency (MHz)"
-msgstr ""
+msgid "Toggle to expert mode"
+msgstr "Canvia al mode expert"
-#: ../../standalone/harddrake2:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
-msgstr ""
+msgid "(on this machine)"
+msgstr "(en aquest ordinador)"
-#
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Cpuid level"
-msgstr "Nivell de seguretat"
+#: ../../network/network.pm:1
+#, c-format
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "L'adreça de la passarel·la ha d'estar en format 1.2.3.4"
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
+msgid ""
+"\"%s\" based winmodem detected, do you want to install needed software ?"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Cpuid family"
-msgstr ""
+msgid "Looking at packages already installed..."
+msgstr "S'estan cercant els paquets ja instal·lats..."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
+msgid "Use Differential Backups"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Coma bug"
-msgstr ""
+msgid "Driver"
+msgstr "Controlador"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
+msgid ""
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
msgstr ""
+"De vegades, el Linuxconf determinarà que s'han de fer algunes tasques\n"
+"en iniciar l'ordinador per mantenir la configuració del sistema."
-#: ../../standalone/harddrake2:1
+#
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Drive capacity"
-msgstr ""
+msgid "Printer on remote lpd server"
+msgstr "Impressora en servidor lpd remot"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Size of the (second level) cpu cache"
+msgid ""
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
msgstr ""
+"Abans d'instal·lar cap font, assegureu-vos que teniu el dret a usar-les i "
+"instal·lar-les en el vostre sistema.\n"
+"\n"
+"Podeu instal·lar les fonts de la manera habitual. En casos estranys, fonts "
+"amb errors poden penjar el vostre servidor X."
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Cache size"
-msgstr "mida del fragment"
-
-#: ../../standalone/harddrake2:1
-#, c-format
msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
msgstr ""
-"- dispositius PCI: dóna la ranura PCI, el dispositiu i la funció d'aquesta "
-"targeta\n"
-"- dispositius EIDE: diu si el dispositiu ésta configurat com a mestre o com "
-"a esclau\n"
-"- dispositius SCSI: dóna el bus SCSI i els identificadors SCSI del dispositiu"
+"El Yaboot és un carregador d'arrencada per a maquinari NewWorld MacIntosh.\n"
+"Pot arrencar tant el GNU/Linux com el MacOS o el MacOSX, si és que els "
+"teniu\n"
+"a l'ordinador. Normalment, aquests altres sistemes operatius es detecten i\n"
+"instal·len correctament; si no és així, però, en aquesta pantalla podeu\n"
+"afegir una entrada manualment. Aneu amb compte de triar els paràmetres\n"
+"correctes.\n"
+"\n"
+"Les opcions principals del Yaboot són:\n"
+"\n"
+" * Missatge d'inicialització: un senzill missatge de text que apareix abans\n"
+"de l'indicador d'arrencada.\n"
+"\n"
+" * Dispositiu d'arrencada: indica on voleu situar la informació necessària\n"
+"per arrencar el GNU/Linux. Normalment, haureu configurat abans una partició\n"
+"bootstrap que contindrà aquesta informació.\n"
+"\n"
+" * Demora de l'Open Firmware: a diferència del LILO, amb el Yaboot hi ha\n"
+"dues demores disponibles. La primera d'elles es mesura en segons i, en "
+"aquest\n"
+"punt, podeu triar entre CD, arrencada OF, MacOS o Linux.\n"
+"\n"
+" * Temps màxim d'arrencada del nucli: aquest temps màxim és similar a la\n"
+"demora d'arrencada del LILO. Després de seleccionar el Linux tindreu aquest\n"
+"temps (en dècimes de segon) abans que se seleccioni la descripció per "
+"defecte\n"
+"del nucli.\n"
+"\n"
+" * Habilita l'arrencada des de CD: si activeu aquesta opció podreu triar\n"
+"'C' per a CD al primer indicador de l'arrencada.\n"
+"\n"
+" * Habilitar l'arrencada OF: si activeu aquesta opció podreu triar 'N' per\n"
+"Open Firmware al primer indicador de l'arrencada.\n"
+"\n"
+" * SO per defecte: podeu seleccionar amb quin SO, per defecte, s'arrencarà\n"
+"quan la demora de l'Open Firmware venci."
-#: ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Location on the bus"
-msgstr "Ubicació en el bus"
+msgid "No mouse"
+msgstr "Cap ratolí"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
-msgstr ""
-"- Dispositius PCI i USB: es llisten els identificadors PCI/USB del venedor, "
-"del dispositiu, del subvenedor i del subdispositiu"
+#: ../../crypto.pm:1 ../../lang.pm:1
+#, c-format
+msgid "Germany"
+msgstr "Alemanya"
-#: ../../standalone/harddrake2:1
+#
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Bus identification"
-msgstr "Identificació del bus"
+msgid "Austria"
+msgstr "Àustria"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+msgid "Run \"sndconfig\" after installation to configure your sound card"
msgstr ""
+"Executeu \"sndconfig\" després de la instal·lació per configurar la targeta "
+"de so"
-#: ../../standalone/harddrake2:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Bogomips"
-msgstr ""
+msgid "Collapse Tree"
+msgstr "Redueix l'arbre"
-#: ../../standalone/harddrake2:1
+#
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "Canal EIDE/SCSI"
+msgid "Auto Install Configurator"
+msgstr "Configuració de la instal·lació automàtica"
-#: ../../standalone/harddrake2:1
+#: ../../steps.pm:1
#, c-format
-msgid "Channel"
-msgstr "Canal"
+msgid "Configure networking"
+msgstr "Configura la xarxa"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
+msgid "Where do you want to install the bootloader?"
+msgstr "On voleu instal·lar el carregador de l'arrencada?"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
msgstr ""
-"aquest és el bus físic al qual el dispositiu està connectat (p.ex.: PCI, "
-"USB...)"
+"El primer pas és triar l'idioma que voleu.\n"
+"\n"
+"Escolliu l'idioma que vulgueu per a la instal·lació i per al sistema.\n"
+"\n"
+"Si feu clic al botó \"Avançat\" podreu seleccionar altres idiomes que "
+"vulgueu\n"
+"instal·lar a la vostra estació de treball. S'instal·laran els fitxers "
+"d'idioma\n"
+"especifics de la documentació i de les aplicacions. Per exemple, si tindreu\n"
+"usuaris anglesos a la vostra màquina, podeu triar el català com a idioma "
+"principal\n"
+"des de l'arbre i, a la secció \"Avançat\", marcar la casella \"Anglès|Regne "
+"Unit\".\n"
+"\n"
+"Cal remarcar que es poden instal·lar múltiples idiomes. Un cop hagueu "
+"seleccionat\n"
+"tots els idiomes que vulgueu , feu clic sobre el botó \"D'acord\" per "
+"continuar.\n"
+"\n"
+"Per canviar d'un idioma a un altre, podeu executar com a root l'ordre \n"
+"\"/usr/sbin/localedrake\" per canviar l'idioma de tot el sistema, o com a "
+"simple\n"
+"usuari per canviar només l'idioma per defecte d'aquest usuari."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Bus"
-msgstr "Bus"
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr "El %s no és compatible amb aquesta versió de Mandrake Linux."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "la llista de controladors alternatius per a aquesta targeta de so"
+msgid "DHCP client"
+msgstr "Client DHCP"
-#
-#: ../../standalone/harddrake2:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Alternative drivers"
-msgstr "Controladors alternatius"
+msgid "Restoring from file %s failed: %s"
+msgstr "Ha fallat la restauració des del fitxer %s: %s"
-#: ../../standalone/keyboarddrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Voleu que la tecla Enrere efectuï un Suprimeix en la consola?"
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech Mouse (sèrie, tipus C7 antic)"
-#: ../../standalone/keyboarddrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Si us plau, seleccioneu la disposició del vostre teclat."
+msgid "Are you sure that you want to set up printing on this machine?\n"
+msgstr "Esteu segur que voleu habilitar la impressió en aquesta màquina?\n"
-#: ../../standalone/livedrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "No es pot iniciar l'actualització en directe!!!\n"
+msgid "New devfs device"
+msgstr "Nou dispositiu devfs"
-#: ../../standalone/livedrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Si us plau, inseriu el CD-ROM d'instal·lació a la unitat i premeu "
-"'D'acord'.\n"
-"Si no el teniu, premeu 'Cancel·la' per evitar l'actualització en directe."
+msgid "ERROR: Cannot spawn %s."
+msgstr "S'ha produït un error: no s'ha pogut engendrar %s."
-#: ../../standalone/livedrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Change Cd-Rom"
-msgstr "Canvieu el CD-ROM"
+msgid "Boot Style Configuration"
+msgstr "Configuració del tipus d'arrencada"
-#: ../../standalone/localedrake:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Automatic time synchronization"
+msgstr "Sincronització automàtica de la hora (usant NTP)"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-"El canvi està fet, però perquè sigui efectiu heu de sortir de la sessió "
-"actual"
+msgid "Backup files not found at %s."
+msgstr "No s'han trobat els fitxers de còpia de seguretat a %s"
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Save as.."
-msgstr "Anomena i desa..."
+msgid "Thank you for choosing Mandrake Linux 9.1"
+msgstr "Gràcies per triar Mandrake Linux 9.1"
-#
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please enter your email address below "
-msgstr "Si us plau, entreu la vostra adreça electrònica"
+msgid "Armenian (phonetic)"
+msgstr "Armeni (fonètic)"
-#
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "alert configuration"
-msgstr "Configuració de l'avís"
+msgid "Card model:"
+msgstr "Model de la targeta:"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Thin Client"
+msgstr "Client DHCP"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Rebreu un avís si la càrrega és més gran que aquest valor"
+msgid "Start Server"
+msgstr "Inicia el servidor"
-#
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "load setting"
-msgstr "paràmetre de càrrega"
+msgid "Turkmenistan"
+msgstr "Turkmenistan"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr "Rebreu un avís si algun dels serveis seleccionats deixa de funcionar"
+msgid "All remote machines"
+msgstr "(en aquest ordinador)"
-#
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "service setting"
-msgstr "paràmetre de servei"
+msgid "Install themes"
+msgstr "Instal·la els temes"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Xinetd Service"
-msgstr "Servei Xinetd"
+msgid ""
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+msgstr ""
+" actualitzacions 2002 MandrakeSoft per Stew Benedict <sbenedict"
+"\\@mandrakesoft.com>"
-#
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "Webmin Service"
-msgstr "Servei Webmin"
+msgid "Espanol"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "SSH Server"
-msgstr "Servidor SSH"
+msgid "Preparing installation"
+msgstr "S'està preparant la instal·lació"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Samba Server"
-msgstr "Servidor Samba"
+msgid "Edit selected host/network"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Postfix Mail Server"
-msgstr "Servidor de correu Postfix"
+msgid "Add User -->"
+msgstr "Afegeix un usuari -->"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ftp Server"
-msgstr "Servidor FTP"
+msgid "Nauru"
+msgstr "Nauru"
-#: ../../standalone/logdrake:1
+#
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Domain Name Resolver"
-msgstr "Sistema de resolució de nom de domini"
+msgid "True Type fonts installation"
+msgstr "Instal·lació de les fonts True Type"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "Servidor World Wide Web Apache"
+msgid "Auto-detect printers connected directly to the local network"
+msgstr ""
+"Detecta automàticament les impressores connectades directament a la xarxa "
+"local"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Benvingut a la utilitat de configuració del correu.\n"
-"\n"
-"Aquí podreu configurar el sistema d'alerta.\n"
+msgid "LAN configuration"
+msgstr "Configuració de la LAN"
-#
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Mail alert configuration"
-msgstr "Configuració de l'alerta de correu"
+msgid "hard disk model"
+msgstr "model de disc dur"
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Mail alert"
-msgstr "Alerta de correu"
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "No podeu utilitzar un volum lògic LVM per al punt de muntatge %s"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "espereu si us plau, s'està analitzant el fitxer: %s"
+msgid "Get Windows Fonts"
+msgstr "Aconsegueix les fonts de Windows"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Content of the file"
-msgstr "Contingut del fitxer"
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Calendar"
-msgstr "Calendari"
+msgid "Iranian"
+msgstr "Iranià"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose file"
-msgstr "Escolliu el fitxer"
+msgid "Croatia"
+msgstr "Croàcia"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "but not matching"
-msgstr "però que no coincideixin amb"
+msgid "Gateway:"
+msgstr "Passarel·la:"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Add server"
+msgstr "Afegeix un usuari"
+
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "matching"
-msgstr "que coincideixin amb"
+msgid "Remote printer name"
+msgstr "Nom de la impressora remota"
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "Settings"
-msgstr "Paràmetres"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together in order to highly reduce hacking risks."
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "A tool to monitor your logs"
-msgstr "Eina per veure els registres"
+msgid "Device: "
+msgstr "Dispositiu: "
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, c-format
-msgid "search"
-msgstr "cerca"
+msgid "Printerdrake"
+msgstr "Printerdrake"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mandrake Tools Explanation"
-msgstr "Explicació d'Eines Mandrake"
+msgid "License agreement"
+msgstr "Acord de llicència"
#
-#: ../../standalone/logdrake:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Syslog"
-msgstr "Syslog"
+msgid "System Options"
+msgstr "Opcions de sistema"
-#
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Messages"
-msgstr "Missatges"
+msgid "Please enter the directory where backups are stored"
+msgstr "Si us plau, entreu el directori on es guarden les còpies de seguretat"
+
+#: ../../security/level.pm:1
+#, c-format
+msgid "Please choose the desired security level"
+msgstr "Escolliu el nivell de seguretat desitjat"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "This host is already in the list, it cannot be added again.\n"
+msgstr ""
+
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid ", USB printer"
+msgstr ", impressora USB \\/*%s"
#
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "User"
-msgstr "Usuari"
+msgid "Choose the applications that will support the fonts:"
+msgstr "Escolliu les aplicacions que suportaran les fonts:"
-#: ../../standalone/logdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "/Help/_About..."
-msgstr "/Ajuda/_Quant a.."
+msgid "Configure X"
+msgstr "Configura l'X"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "/Options/Test"
-msgstr "/Opcions/Prova"
+msgid "Turkish (traditional \"F\" model)"
+msgstr "Turc (tradicional, model \"F\")"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "/File/-"
-msgstr "/Fitxer/-"
+msgid "Congratulations!"
+msgstr "Felicitats!"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "/File/Save _As"
-msgstr "/Fitxer/_Anomena i desa"
+msgid "Use owner id for execution"
+msgstr "Usa l'identificador del propietari (UID) per a l'execució"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "<control>S"
-msgstr "<control>S"
+msgid "Down"
+msgstr "Baixa"
-#: ../../standalone/logdrake:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "/File/_Save"
-msgstr "/Fitxer/De_sa"
+msgid "Raw printer (No driver)"
+msgstr "Impressora en cru (raw) (Cap controlador)"
-#: ../../standalone/logdrake:1
+#: ../../network/modem.pm:1
+#, fuzzy, c-format
+msgid "Install rpm"
+msgstr "Instal·la"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "<control>O"
-msgstr "<control>O"
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
+msgstr ""
+"Per imprimir un fitxer des de la línia d'ordres (finestra de terminal) podeu "
+"utilitzar la comanda \"%s <fitxer>\" o una eina d'impressió gràfica: \"xpp "
+"<fitxer>\" o \"kprinter <fitxer>\". Les eines gràfiques us permeten escollir "
+"la impressora i modificar-ne els paràmetres fàcilment.\n"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "/File/_Open"
-msgstr "/Fitxer/_Obre"
+msgid "Time remaining "
+msgstr "Temps restant "
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "<control>N"
-msgstr "<control>N"
+msgid "UK keyboard"
+msgstr "Teclat Regne Unit"
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "/File/_New"
-msgstr "/Fitxer/_Nou"
+msgid "Unmount"
+msgstr "Desmunta"
#
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Show only for the selected day"
-msgstr "Mostrar-ho només per al dia seleccionat"
+msgid "Uninstall Fonts"
+msgstr "Desinstal·la fonts"
-#: ../../standalone/mousedrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Emulate third button?"
-msgstr "Voleu emular el tercer botó?"
+msgid "Microsoft Explorer"
+msgstr "Microsoft Explorer"
-#: ../../standalone/mousedrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please choose your mouse type."
-msgstr "Si us plau, seleccioneu el tipus del vostre ratolí."
+msgid "German (no dead keys)"
+msgstr "Alemany (sense tecles inoperatives)"
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connect %s"
-msgstr "Connecta"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transferring %s..."
+msgstr "S'està transferint %s..."
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Disconnect %s"
-msgstr "Desconnecta"
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "32 thousand colors (15 bits)"
+msgstr "32.768 colors (15 bits)"
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
+#: ../../any.pm:1
+#, c-format
msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
+"You can export using NFS or Samba. Please select which you'd like to use."
msgstr ""
-"Avís: s'ha detectat una altra connexió a Internet, podria estar utilitzant "
-"la vostra xarxa"
+"Podeu exportar utilitzant NFS o Samba. Seleccioneu quin voleu utilitzar."
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid "received"
-msgstr ""
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Reboot"
+msgstr "Arrel"
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "transmitted"
-msgstr ""
+msgid "Gambia"
+msgstr "Gàmbia"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "received: "
-msgstr ""
+msgid "Mandrake Control Center"
+msgstr "Centre de Control Mandrake"
-#: ../../standalone/net_monitor:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "sent: "
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
msgstr ""
+"Podeu introduir diferents ports.\n"
+"Són exemples vàlids: 139/tcp 139/udp.\n"
+"Cerqueu informació a /etc/services"
-#
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Local measure"
-msgstr "Fitxers locals"
-
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1
#, c-format
-msgid "average"
+msgid ""
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
msgstr ""
-#
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Color configuration"
-msgstr "Configuració de l'avís"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t-Tape \n"
+msgstr "\t-Cinta \n"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakhelp:1
#, c-format
msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
msgstr ""
#
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connection complete."
-msgstr "Velocitat de la connexió"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Remember this password"
+msgstr "Recorda aquesta contrasenya"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Disconnection from the Internet complete."
-msgstr ""
+msgid "Internet Connection Sharing is now enabled."
+msgstr "Ara, la connexió compartida a Internet està habilitada."
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Disconnection from the Internet failed."
-msgstr ""
+msgid "\t-Network by SSH.\n"
+msgstr "\t-Xarxa per SSH.\n"
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connecting to the Internet "
-msgstr "Connecta't a Internet"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
+msgstr ""
+"Si la impressora desitjada ha estat detectada automàticament, només cal que "
+"la seleccioneu a la llista i que hi afegiu el nom d'usuari, la contrasenya i "
+"el grup de treball, si són necessaris."
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Disconnecting from the Internet "
-msgstr "Connecta't a Internet"
+#: ../../help.pm:1 ../../install_interactive.pm:1
+#, c-format
+msgid "Use the free space on the Windows partition"
+msgstr "Utilitza l'espai lliure de la partició de Windows"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Wait please, testing your connection..."
-msgstr "S'està comprovant la vostra connexió..."
+msgid "%s found on %s, configure it automatically?"
+msgstr "S'ha trobat %s en %s, voleu configurar-lo?"
-#: ../../standalone/net_monitor:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Logs"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
msgstr ""
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connection Time: "
-msgstr "Tipus de connexió: "
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "XFree86 driver: %s\n"
+msgstr "Controlador de l'XFree86: %s\n"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Receiving Speed:"
+msgid "This host/network is already in the list, it cannot be added again.\n"
msgstr ""
-#
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Sending Speed:"
-msgstr "S'estan enviant els fitxers..."
-
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Statistics"
+msgid ""
+"\n"
+" DrakBackup Report \n"
+"\n"
msgstr ""
+"\n"
+" Informe del DrakBackup \n"
+"\n"
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Profile "
-msgstr "Perfil: "
-
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Network Monitoring"
-msgstr "Configuració de xarxa"
-
-#: ../../standalone/printerdrake:1
-#, fuzzy, c-format
-msgid "Reading data of installed printers..."
-msgstr "Impressores disponibles"
-
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Name/IP address of host:"
-msgstr ""
+msgid "Choose the packages you want to install"
+msgstr "Escolliu els paquets que voleu instal·lar"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr ""
+msgid "Papua New Guinea"
+msgstr "Papua Nova Guinea"
#
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scannerdrake"
-msgstr "Seleccioneu un escàner"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Serbian (cyrillic)"
+msgstr "Serbi (ciríl·lic)"
-#
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Si us plau, introduïu el nom de l'ordinador o la IP."
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "Make kernel message quiet by default"
+msgstr "Fes que, per defecte, no apareguin els missatges del nucli"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
+msgid ""
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
msgstr ""
+"Voleu definir la impressora (\"%s\")\n"
+"com a impressora predeterminada?"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Sharing of local scanners"
-msgstr "Impressores disponibles"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "This machine"
-msgstr "(en aquest ordinador)"
-
-#
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Remove selected host"
-msgstr "Elimina la selecció"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The DHCP end range"
+msgstr "L'adreça final del rang del DHCP"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Edit selected host"
-msgstr "s'ha detectat %s"
+#: ../../any.pm:1
+#, c-format
+msgid "Creating bootdisk..."
+msgstr "S'està creant el disc d'arrencada..."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Add host"
-msgstr "Afegeix un usuari"
+msgid "Wait please, testing your connection..."
+msgstr "S'està comprovant la vostra connexió..."
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Usage of remote scanners"
-msgstr "Utilitza l'espai lliure"
+msgid "Bringing down the network"
+msgstr "S'està desactivant la xarxa"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "All remote machines"
-msgstr "(en aquest ordinador)"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Login ID"
+msgstr "ID d'entrada"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
msgstr ""
+"L'NFS és un protocol popular de compartició de fitxers en xarxes TCP/IP\n"
+"Aquest servei proporciona la funcionalitat de blocatge de fitxer NFS."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Use the scanners on hosts: "
-msgstr ""
+msgid "DHCP Client"
+msgstr "Client DHCP"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Use scanners on remote computers"
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Compartició de fitxers"
+msgid "dismiss"
+msgstr "deixa-ho córrer"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr ""
+msgid "Printing/Scanning on \"%s\""
+msgstr "S'està imprimint/escanejant en \"%s\""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
+msgid "omit raid modules"
+msgstr "omet els mòduls RAID"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
+"L'lpd és el dimoni d'impressió necessari perquè l'lpr funcioni\n"
+"correctament. Bàsicament, es tracta d'un servidor que assigna les\n"
+"tasques d'impressió a la(es) impressora(es)."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Re-generating list of configured scanners ..."
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for new scanners ..."
-msgstr "Impressores disponibles"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for configured scanners ..."
-msgstr "Impressores disponibles"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scanner sharing"
-msgstr "Compartició de fitxers"
+msgid "Internet Connection Configuration"
+msgstr "Configuració de la connexió a Internet"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Add a scanner manually"
-msgstr "Seleccioneu l'usuari manualment"
+#: ../../modules/parameters.pm:1
+#, c-format
+msgid "comma separated numbers"
+msgstr "nombres separats per coma"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Search for new scanners"
-msgstr "Impressores disponibles"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid ""
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
+msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr "No s'ha trobat cap impressora connectada directament a l'ordinador"
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule up one level"
+msgstr "Puja la regla actual un nivell"
#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
@@ -19159,368 +19236,331 @@ msgstr ""
"\n"
"Hi ha una impressora desconeguda connectada directament a l'ordinador."
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr ""
-"\n"
-"Hi ha una impressora desconeguda connectada directament a l'ordinador."
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "Voleu realment suprimir la impressora \"%s\"?"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"El vostre escàner %s ha estat configurat.\n"
-"Ara podeu escanejar documents utilitzant \"XSane\" des de Multimèdia/Gràfics "
-"en el menú d'aplicacions."
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "I can't find any room for installing"
+msgstr "No es pot trobar espai per a la instal·lació"
#
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "choose device"
-msgstr "escolliu un dispositiu"
+msgid "Default printer"
+msgstr "Impressora predeterminada"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Please select the device where your %s is attached"
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid ""
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
msgstr ""
-"Scannerdrake no ha pogut detectar el vostre escàner %s.\n"
-"Si us plau seleccioneu el dispositiu al qual teniu connectat l'escàner"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for scanners ..."
-msgstr "Impressores disponibles"
-
-#
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Auto-detect available ports"
-msgstr "Detectada automàticament"
+"Heu configurat múltiples maneres de conectar-se a Internet.\n"
+"Escolliu la que voleu utilitzar.\n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr ""
+msgid "Modify RAID"
+msgstr "Modifica el RAID"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
+#: ../../network/isdn.pm:1
+#, c-format
msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
msgstr ""
-"Aquest escàner %s s'ha de configurar amb printerdrake.\n"
-"Podeu executar printerdrake des del Centre de Control Mandrake en la secció "
-"de Maquinari."
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "The %s is unsupported"
-msgstr "Aquest escàner %s no és suportat"
+"S'ha detectat una targeta PCI XDSI, però no es reconeix el tipus. Si us "
+"plau, seleccioneu una targeta PCI a la pantalla següent."
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr "El %s no és compatible amb aquesta versió de Mandrake Linux."
+#: ../../any.pm:1
+#, c-format
+msgid "Add user"
+msgstr "Afegeix un usuari"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
-msgstr "El %s no és compatible amb aquesta versió de Mandrake Linux."
+msgid "RAID-disks %s\n"
+msgstr "Discs RAID %s\n"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Port: %s"
-msgstr "Port"
+#: ../../lang.pm:1
+#, c-format
+msgid "Liberia"
+msgstr "Libèria"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ", "
+msgid ""
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Detected model: %s"
-msgstr "Model detectat: %s %s"
+#: ../../steps.pm:1
+#, c-format
+msgid "Choose your keyboard"
+msgstr "Escolliu el vostre teclat"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid " ("
-msgstr ""
+msgid "Format partitions"
+msgstr "Formata les particions"
#
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Select a scanner model"
-msgstr "Seleccioneu un escàner"
+msgid "Automatic correction of CUPS configuration"
+msgstr "Configuració automàtica de CUPS"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr ""
-"%s no és a la base de dades de l'escàner, voleu configurar-lo manualment?"
+msgid "Running \"%s\" ..."
+msgstr "S'està executant \"%s\"..."
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "S'ha trobat %s en %s, voleu configurar-lo?"
+#: ../../harddrake/v4l.pm:1
+#, c-format
+msgid "enable radio support"
+msgstr "habilita l'ús de la ràdio"
-#: ../../standalone/service_harddrake:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Hardware probing in progress"
-msgstr "Detecció en procés"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices were added:\n"
-msgstr "S'han afegit alguns dispositius:\n"
+msgid "Scanner sharing to hosts: "
+msgstr "Compartició de fitxers"
-#: ../../standalone/service_harddrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "S'han suprimit alguns dispositius en la classe \"%s\" de maquinari:\n"
+msgid "Loopback file name: %s"
+msgstr "Nom del fitxer de loopback: %s"
-#: ../../share/advertising/01-thanks.pl:1
-#, c-format
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
+#
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Please choose the printer to which the print jobs should go."
msgstr ""
-"L'èxit de MandrakeSoft es basa en els principis del Codi Font Obert. El "
-"vostre nou sistema operatiu és el resultat del treball en col·laboració de "
-"la Comunitat Linux de tot el món"
-
-#: ../../share/advertising/01-thanks.pl:1
-#, c-format
-msgid "Welcome to the Open Source world."
-msgstr "Benvingut al món del Codi Font Obert"
+"Si us plau, seleccioneu el port al qual teniu connectada la impressora."
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr "Gràcies per triar Mandrake Linux 9.1"
+msgid "Do not transfer printers"
+msgstr "No transfereixis cap impressora"
-#: ../../share/advertising/02-community.pl:1
-#, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
-msgstr ""
-"Per compartir el vostre coneixement i ajudar a construir eines per a Linux, "
-"apunteu-vos als fòrums de discussió que trobareu a les nostres pàgines de la "
-"\"Comunitat\""
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Delay before booting the default image"
+msgstr "Demora abans d'arrencar la imatge predeterminada"
-#: ../../share/advertising/02-community.pl:1
-#, c-format
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
-msgstr ""
-"Voleu saber més coses de la comunitat del Codi Font Obert? Uniu-vos al món "
-"del Codi Font Obert"
-
-#: ../../share/advertising/02-community.pl:1
-#, c-format
-msgid "Build the future of Linux!"
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+" DUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
msgstr ""
+" Aquest programa és programari lliure; el podeu redistribuir i/o modificar\n"
+" sota els termes de la 'GNU General Public License' publicada per\n"
+" la Free Software Foundation; tant la versió 2 com (si voleu)\n"
+" qualsevol versió posterior.\n"
+"\n"
+" Aquest programa és distribueix amb l'esperança que serà útil,\n"
+" però SENSE CAP GARANTIA; sense ni tant sols la garantia implícita de\n"
+" MERCANTIBILITAT o CAPACITAT DE REALITZAR UN DETERMINAT PROPÒSIT. Mireu la\n"
+" 'GNU General Public License' per a més detalls.\n"
+"\n"
+" Hauríeu d'haver rebut una còpia de la 'GNU General Public License'\n"
+" amb el programa; si no és així, escriviu a la Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-#: ../../share/advertising/03-software.pl:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
-msgstr ""
-"Mandrake Linux 9.1 us permet utilitzar el programari més actual per "
-"reproduir fitxers d'àudio, editar i organitzar les vostres imatges i fotos, "
-"i reproduir vídeos"
+msgid "Please check for multisession CD"
+msgstr "Marqueu aquesta opció si voleu un CD multisessió"
-#: ../../share/advertising/03-software.pl:1
+#
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
-msgstr ""
+msgid "user"
+msgstr "usuari"
-#: ../../share/advertising/03-software.pl:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr ""
+msgid "Use Hard Disk to backup"
+msgstr "Usa el disc dur per fer la còpia de seguretat"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
+msgid "Configure"
+msgstr "Configura"
#
-#: ../../share/advertising/04-configuration.pl:1
-#, fuzzy, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "Configuració del Servidor de Terminal de Mandrake"
-
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
-msgstr ""
-"Mandrake Linux 9.1 us proporciona onze interfícies d'usuari totalment "
-"modificables: KDE 3, Gnome 2, WindowMaker..."
-
-#: ../../share/advertising/05-desktop.pl:1
-#, c-format
-msgid "A customizable environment"
-msgstr ""
+msgid "Scannerdrake"
+msgstr "Seleccioneu un escàner"
-#: ../../share/advertising/06-development.pl:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
msgstr ""
+"Avís: s'ha detectat una altra connexió a Internet, podria estar utilitzant "
+"la vostra xarxa"
-#: ../../share/advertising/06-development.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr "Mandrake Linux 9.1 és l'últim en plataformes de desenvolupament"
+msgid "Backup Users"
+msgstr "Còpia de seguretat dels usuaris"
-#: ../../share/advertising/07-server.pl:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
msgstr ""
-"Transformeu el vostre ordinador en un potent servidor Linux amb només uns "
-"quants clics del ratolí: servidor Web, correu electrònic, tallafoc, "
-"encaminador, servidor de fitxers i d'impressió..."
+"Si us plau, introduïu el nom del vostre ordinador central.\n"
+"Aquest nom ha de ser complet, com ara \"mybox.mylab.myco.com\".\n"
+"També podeu introduir l'adreça IP de la passarel·la, si en teniu una."
-#: ../../share/advertising/07-server.pl:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Turn your computer into a reliable server"
-msgstr "Convertiu la vostra màquina en un servidor fiable"
+msgid "Select Printer Spooler"
+msgstr "Seleccioneu la cua d'impressió"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
-msgstr ""
-"Trobareu tot el conjunt de solucions Linux, així com ofertes especials en "
-"productes i altres avantatges, a la nostra botiga en línia:"
+msgid "Create new theme"
+msgstr "Crea un nou tema"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The official MandrakeSoft Store"
-msgstr "La botiga oficial de MandrakeSoft"
+msgid "Mandrake Tools Explanation"
+msgstr "Explicació d'Eines Mandrake"
-#: ../../share/advertising/09-mdksecure.pl:1
+#
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
-msgstr ""
-"MandrakeSoft treballa al costat d'un conjunt d'empreses que ofereixen "
-"solucions professionals compatibles amb el Mandrake Linux. Trobareu una "
-"llista d'aquests socis al MandrakeStore"
+msgid "No image found"
+msgstr "No s'ha trobat cap impressora!"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
+msgid ""
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
msgstr ""
+"Alguns paquets importants no s'han instal·lat correctament.\n"
+"La vostra unitat de CD-ROM, o bé el CD-ROM, són defectuosos.\n"
+"Comproveu el CD-ROM en un ordinador instal·lat mitjançant \"rpm -qpl "
+"Mandrake/RPMS/*.rpm\"\n"
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Detected model: %s"
+msgstr "Model detectat: %s %s"
+
+#: ../../standalone/drakedm:1
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Optimize your security by using Mandrake Linux"
-msgstr "Optimitzeu la vostra seguretat"
+msgid "if set to yes, run the daily security checks."
+msgstr ""
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr "Aquest producte es troba disponible al lloc web de MandrakeStore"
+msgid "Azerbaijan"
+msgstr "Azerbaitjan"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
-msgstr ""
+msgid "No tape in %s!"
+msgstr "No s'ha trobat cap cinta a %s"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr ""
+msgid "Dvorak (US)"
+msgstr "Dvorak (Estats Units)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""
-"Uniu-vos als grups de suport de MandrakeSoft i a la Comunitat Linux en línia "
-"per compartir els vostres coneixements i ajudar els altres esdevenint un "
-"expert reconegut al lloc web de suport tècnic en línia:"
+"aquest és el bus físic al qual el dispositiu està connectat (p.ex.: PCI, "
+"USB...)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr ""
-"Cerqueu les solucions als vostres problemes a través de la nostra plataforma "
-"de suport en línia"
+msgid "How is the printer connected?"
+msgstr "Com està connectada la impressora?"
#
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Become a MandrakeExpert"
-msgstr "Esdeveniu un MandrakeExpert"
+msgid "Security level"
+msgstr "Nivell de seguretat"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr ""
-"Cada incident serà investigat per un expert tècnic qualificat de "
-"MandrakeSoft."
+msgid "final resolution"
+msgstr "resolució definitiva"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr ""
-"Una plataforma en línia per respondre a les necessitats de suport especials "
-"de les empreses"
+msgid "Services"
+msgstr "Serveis"
-#
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "Grup corporatiu MandrakeExpert"
+msgid "4 MB"
+msgstr "4 MB"
#: ../../share/compssUsers:999
msgid "Office Workstation"
@@ -19535,10 +19575,6 @@ msgstr ""
"càlcul (kspread, gnumeric), visualitzadors pdf, etc."
#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Estació de treball"
-
-#: ../../share/compssUsers:999
msgid "Game station"
msgstr "Estació de jocs"
@@ -19612,10 +19648,6 @@ msgstr ""
"eines"
#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Entorn gràfic"
-
-#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Estació de treball GNOME"
@@ -19636,10 +19668,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Desenvolupament"
-
-#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "Biblioteques de desenvolupament C i C++, programes i fitxers include"
@@ -19712,40 +19740,105 @@ msgstr "Servidor NFS, Servidor SMB, Servidor Proxy, Servidor SSH"
#: ../../share/compssUsers:999
#, fuzzy
-msgid "Audio station"
-msgstr "Estació multimèdia"
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr ""
+"Conjunt d'eines per llegir i enviar correu i notícies (pine, mutt, tin...) i "
+"per navegar pel Web"
+
+#~ msgid "Internet connection & configuration"
+#~ msgstr "Connexió i configuració d'Internet"
+
+#
+#~ msgid "Configure the connection"
+#~ msgstr "Configura la connexió"
+
+#~ msgid "Disconnect"
+#~ msgstr "Desconnecta"
+
+#~ msgid "Connect"
+#~ msgstr "Connecta"
+
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Podeu tornar a configurar la connexió."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Podeu connectar-vos a Internet o tornar a configurar la connexió."
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "Ara mateix no esteu connectat a Internet."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can disconnect or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Podeu desconnectar-vos o tornar a configurar la connexió."
+
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "Ara mateix esteu connectat a Internet."
+
+#~ msgid "files sending by FTP"
+#~ msgstr "fitxers que s'estan enviant per FTP"
+
+#~ msgid "Use incremental backup (do not replace old backups)"
+#~ msgstr ""
+#~ "Usa la còpia de seguretat incremental (no reemplacis les còpies antigues)"
+
+#~ msgid "Relaunch 'lilo'"
+#~ msgstr "Torna a executar 'lilo'"
+
+#~ msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+#~ msgstr "Fes que initrd sigui 'mkinitrd -f /boot/initrd-%s.img %s'."
+
+#~ msgid "Write %s"
+#~ msgstr "Escriu %s"
+
+#~ msgid "Copy %s to %s"
+#~ msgstr "S'està copiant %s a %s"
+
+#~ msgid "Backup %s to %s.old"
+#~ msgstr "Fes una còpia de seguretat de %s en %s.old"
+
+#~ msgid "ttf fonts conversion"
+#~ msgstr "convesió de fonts ttf"
+
+#~ msgid "Fonts conversion"
+#~ msgstr "Conversió de fonts"
+
+#~ msgid "Author:"
+#~ msgstr "Autor:"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Sound playing/editing programs"
-msgstr "Programes de reproducció/edició de so i vídeo"
+#~ msgid "Audio station"
+#~ msgstr "Estació multimèdia"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Video station"
-msgstr "Estació de jocs"
+#~ msgid "Sound playing/editing programs"
+#~ msgstr "Programes de reproducció/edició de so i vídeo"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Video playing programs"
-msgstr "Programes de reproducció/edició de so i vídeo"
+#~ msgid "Video station"
+#~ msgstr "Estació de jocs"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Graphic station"
-msgstr "Estació de jocs"
+#~ msgid "Video playing programs"
+#~ msgstr "Programes de reproducció/edició de so i vídeo"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Graphics programs"
-msgstr "Programes gràfics com El Gimp"
+#~ msgid "Graphic station"
+#~ msgstr "Estació de jocs"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr ""
-"Conjunt d'eines per llegir i enviar correu i notícies (pine, mutt, tin...) i "
-"per navegar pel Web"
+#~ msgid "Graphics programs"
+#~ msgstr "Programes gràfics com El Gimp"
#, fuzzy
#~ msgid "Printer sharing"
@@ -19968,12 +20061,10 @@ msgstr ""
#~ "button\n"
#~ "to change it if necessary.\n"
#~ "\n"
-#~ " * \"Keyboard\": check the current keyboard map configuration and click "
-#~ "on\n"
+#~ " * \"%s\": check the current keyboard map configuration and click on\n"
#~ "the button to change that if necessary.\n"
#~ "\n"
-#~ " * \"Country\": check the current country selection. If you are not in "
-#~ "this\n"
+#~ " * \"%s\": check the current country selection. If you are not in this\n"
#~ "country, click on the button and choose another one.\n"
#~ "\n"
#~ " * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
@@ -20330,10 +20421,6 @@ msgstr ""
#~ "necessiteu el /boot"
#
-#~ msgid "Upgrade"
-#~ msgstr "Actualitza"
-
-#
#~ msgid "Do you want to configure another printer?"
#~ msgstr "Voleu configurar una altra impressora?"
diff --git a/perl-install/share/po/cs.po b/perl-install/share/po/cs.po
index 279f901c1..9f66dc008 100644
--- a/perl-install/share/po/cs.po
+++ b/perl-install/share/po/cs.po
@@ -8,7 +8,7 @@
msgid ""
msgstr ""
"Project-Id-Version: DrakX-cs\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
"PO-Revision-Date: 2003-03-13 11:16GMT+0100\n"
"Last-Translator: Radek VybĂ­ral <Radek.Vybiral@vsb.cz>\n"
"Language-Team: Czech <cs@li.org>\n"
@@ -17,988 +17,1900 @@ msgstr ""
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 0.9.6\n"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Scanning partitions to find mount points"
+msgstr "HledĂĄm oddĂ­ly, kterĂ© lze pƙipojit"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of suid root files."
+msgstr ""
+"pokud je nastaveno, kontroluje pƙidávání/odebírání souborƯ se suid root."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t\tErase=%s"
+msgstr "\t\tErase=%s"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "network printer port"
+msgstr "port síƄové tiskårny"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Please insert floppy disk:"
+msgstr "ProsĂ­m vloĆŸte disketu:"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "PCMCIA"
+msgstr "PCMCIA"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
+"The backup partition table has not the same size\n"
+"Still continue?"
msgstr ""
-"SdĂ­lenĂ­ mezi uĆŸivateli pouĆŸĂ­vĂĄ skupinu \"fileshare\". \n"
-"UĆŸivatele lze do tĂ©to skupiny pƙidat pomocĂ­ nĂĄstroje UserDrake."
+"ZĂĄloĆŸnĂ­ tabulka oddĂ­lĆŻ nemĂĄ stejnou velikost\n"
+"Chcete pƙesto chcete pokračovat?"
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Cancel"
-msgstr "ZruĆĄit"
+msgid "Which username"
+msgstr "KterĂ© uĆŸivatelskĂ© jmĂ©no"
#: ../../any.pm:1
#, c-format
-msgid "Launch userdrake"
-msgstr "Spustit UserDrake"
+msgid "Which type of entry do you want to add?"
+msgstr "JakĂœ typ zĂĄznamu chcete pƙidat?"
-#: ../../any.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Restore partition table"
+msgstr "Obnovit tabulku oddĂ­lĆŻ"
+
+#: ../../printer/cups.pm:1
+#, c-format
+msgid "On CUPS server \"%s\""
+msgstr "Na serveru CUPS \"%s\""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Post-install configuration"
+msgstr "ProbĂ­hĂĄ nastavovĂĄnĂ­ po instalaci"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``%s'' instead"
+msgstr "MĂ­sto toho pouĆŸijte ``%s''"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Type"
+msgstr "Změnit typ"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
"\n"
-"\"Custom\" permit a per-user granularity.\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
msgstr ""
-"Chcete povolit uĆŸivatelĆŻm, aby si mohli sdĂ­let adresáƙe ve svĂ©m domovskĂ©m "
-"adresáƙi?\n"
-"Pokud to povolĂ­te, uĆŸivatelĆŻm stačí pouze klepnout na \"SdĂ­let\" v "
-"aplikacĂ­ch Konqueror a Nautilus.\n"
"\n"
-"Lze takĂ© provĂ©st \"VlastnĂ­\" povolenĂ­ pro jednotlivĂ© uĆŸivatele.\n"
+"TakĂ© tiskĂĄrny pouĆŸĂ­vajĂ­cĂ­ PPD soubory od jejich vĂœrobcĆŻ nebo tiskĂĄrny s "
+"nativnĂ­mi ovladači pro CUPS nelze pƙenĂ©st."
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "ChybĂ­ potƙebnĂœ balíček %s"
+msgid "Sri Lanka"
+msgstr "SrĂ­ Lanka"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
-"NynĂ­ lze provĂ©st export pƙes protokol NFS nebo Samba. Vyberte prosĂ­m, kterĂœ "
-"chcete pouĆŸĂ­t."
+"NĂĄsledujĂ­cĂ­ tiskĂĄrny\n"
+"\n"
+"%s %s\n"
+"jsou pƙímo pƙipojeny k vaơemu počítači"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Balíček %s musĂ­ bĂœt nainstalovĂĄn. Chcete ho nainstalovat?"
+msgid "Central African Republic"
+msgstr "CentrĂĄlnĂ­ africkĂĄ republika"
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Custom"
-msgstr "VlastnĂ­"
+msgid "Gateway device"
+msgstr "Zaƙízení brány (gateway)"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Allow all users"
-msgstr "Povolit vĆĄem uĆŸivatelĆŻm"
+msgid "Net Method:"
+msgstr "SĂ­Ć„ovĂĄ metoda:"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "No sharing"
-msgstr "NesdĂ­let"
+msgid "Ethernetcard"
+msgstr "EthernetovĂĄ karta"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "More"
-msgstr "VĂ­ce"
+msgid "Parameters"
+msgstr "Parametry"
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Here is the full list of available countries"
-msgstr "Zde je kompletnĂ­ seznam dostupnĂœch zemĂ­"
+msgid "Auto-detect"
+msgstr "Autodetekce"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please choose your country."
-msgstr "Vyberte si prosĂ­m svoji zem."
+msgid "Interface:"
+msgstr "RozhranĂ­:"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid " / Region"
-msgstr "Reunion"
+#: ../../steps.pm:1
+#, c-format
+msgid "Select installation class"
+msgstr "Volba typu instalace"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Country"
-msgstr "Země"
+msgid "on CDROM"
+msgstr "na CDROM"
-#: ../../any.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "All languages"
-msgstr "VĆĄechny jazyky"
+msgid ""
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
+msgstr ""
+"Nepodaƙilo se pƙipojit k Internetu.\n"
+"Pokuste se pƙekonfigurovat danĂ© pƙipojenĂ­."
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use Unicode by default"
-msgstr "PouĆŸĂ­t Unicode jako vĂœchozĂ­"
+msgid ""
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
+msgstr ""
+"Pƙipojit tiskárnu k Linux serveru a nechat počítač(e) s Windows pracovat "
+"jako klienty.\n"
+"\n"
+"Chcete opravdu pokračovat v nastavení tiskárny tímto zpƯsobem?"
-#: ../../any.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Belarus"
+msgstr "Bělorusko"
+
+#: ../../partition_table.pm:1
+#, c-format
+msgid "Error writing to file %s"
+msgstr "Chyba pƙi zapisování do souboru %s"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
msgstr ""
-"Mandrake Linux podporuje vĂ­ce jazykĆŻ. MĆŻĆŸete si zvolit dalĆĄĂ­ jazyky,\n"
-"které budou dostupné po instalaci a nåsledném restartu systému."
+"apmd je pouĆŸĂ­vĂĄn pro sledovĂĄnĂ­ stavu baterie a zaznamenĂĄvĂĄnĂ­ pƙes syslog.\n"
+"MĆŻĆŸe takĂ© bĂœt pouĆŸit pro vypnutĂ­ počítače pƙi vybitĂ© baterii."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose a language to use."
-msgstr "ProsĂ­m zvolte si jazyk, kterĂœ chcete pouĆŸĂ­vat."
+msgid "Use tape to backup"
+msgstr "PouĆŸĂ­t pĂĄskovou jednotku"
-#: ../../any.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Choose the window manager to run:"
-msgstr "Vyberte si, kterĂœ sprĂĄvce oken mĂĄ bĂœt spouĆĄtěn:"
+msgid "The following packages are going to be installed"
+msgstr "Tyto balíčky budou instalovány"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the default user:"
-msgstr "Zvolte standardnĂ­ho uĆŸivatele:"
+msgid "CUPS configuration"
+msgstr "NastavenĂ­ CUPS"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to use this feature?"
-msgstr "Chcete pouĆŸĂ­t tuto vlastnost?"
+msgid "Hong Kong"
+msgstr "Hong Kong"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "I can set up your computer to automatically log on one user."
+msgid "Not enough free space to allocate new partitions"
+msgstr "NenĂ­ dostatek mĂ­sta pro vytvoƙenĂ­ novĂ©ho diskovĂ©ho oddĂ­lu"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving"
+msgstr "Pƙesouvám"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
msgstr ""
-"MĆŻĆŸu nastavit vĂĄĆĄ počítač tak, aby automaticky pƙihlĂĄsil vybranĂ©ho uĆŸivatele."
+"\n"
+"Aktivity programu DrakBackup skrze %s:\n"
+"\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Autologin"
-msgstr "AutomatickĂ© pƙihlĂĄĆĄenĂ­"
+msgid "("
+msgstr "("
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Icon"
-msgstr "Ikona"
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgstr ""
+"Vítá vás prƯvodce pƙipojením k síti\n"
+"\n"
+"Nyní lze nastavit pƙipojení k síti nebo internetu.\n"
+"Pokud nechcete pouĆŸĂ­t automatickou detekci, odznačte políčko.\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "Shell"
-msgstr "Shell"
+msgid ")"
+msgstr ")"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Password (again)"
-msgstr "Heslo (podruhé)"
+msgid "Lebanon"
+msgstr "Libanon"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Password"
-msgstr "Heslo"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "User name"
-msgstr "UĆŸivatelskĂ© jmĂ©no"
+msgid "Stop"
+msgstr "Stop"
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Real name"
-msgstr "SkutečnĂ© jmĂ©no"
+msgid "Edit selected host"
+msgstr "Upravit vybranĂœ počítač"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Accept user"
-msgstr "Vytvoƙit uĆŸivatele"
+msgid "No CD device defined!"
+msgstr "NenĂ­ definovĂĄno ĆŸĂĄdnĂ© zaƙízenĂ­ CD!"
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Done"
-msgstr "Hotovo"
+msgid "Bulgarian (phonetic)"
+msgstr "Bulharské (foneticky)"
+
+#: ../../standalone/drakpxe:1
+#, c-format
+msgid "The DHCP start ip"
+msgstr "Počátek pásma adres DHCP"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "256 kB"
+msgstr "256 kB"
#: ../../any.pm:1
#, c-format
+msgid "Bootloader main options"
+msgstr "Základní nastavení zaváděcího programu"
+
+#: ../../standalone.pm:1
+#, c-format
msgid ""
-"Enter a user\n"
-"%s"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
msgstr ""
-"Zadejte uĆŸivatele\n"
-"%s"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Add user"
-msgstr "Pƙidat uĆŸivatele"
+msgid "Tape"
+msgstr "PĂĄska"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This user name has already been added"
-msgstr "Toto uĆŸivatelskĂ© jmĂ©no uĆŸ bylo pƙidĂĄno"
+msgid "Scanning network..."
+msgstr "ZkoumĂĄm sĂ­Ć„...."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The user name is too long"
-msgstr "Toto uĆŸivatelskĂ© jmĂ©no je pƙíliĆĄ dlouhĂ©"
+msgid ""
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
+msgstr "Tato volba dovolĂ­ obnovit rĆŻznĂ© verze adresáƙe /etc."
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "UĆŸivatelskĂ© jmĂ©no mĆŻĆŸe obsahovat pouze malĂĄ pĂ­smena, čísla, '-' a '_'"
+msgid "Malaysia"
+msgstr "Malajsie"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please give a user name"
-msgstr "ProsĂ­m zadejte uĆŸivatelskĂ© jmĂ©no"
+msgid "Swiss (French layout)"
+msgstr "Ć vĂœcarskĂ© (FrancouzskĂœ styl)"
-#: ../../any.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "This password is too simple"
-msgstr "Toto heslo je pƙíliĆĄ jednoduchĂ©"
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "mkraid neuspěl (moĆŸnĂĄ, ĆŸe chybĂ­ raidtools?)"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Webcam"
+msgstr "WebovĂĄ kamera"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "size of the (second level) cpu cache"
+msgstr "Velikost cache (druhĂĄ Ășroveƈ) na cpu"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Soundcard"
+msgstr "ZvukovĂĄ karta"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
+msgstr ""
+"Pro vytiĆĄtěnĂ­ souboru z pƙíkazovĂ© ƙádky (v terminĂĄlovĂ©m okně) pouĆŸijte "
+"pƙíkaz \"%s <soubor>\".\n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please try again"
-msgstr "Zkuste to znovu, prosĂ­m"
+msgid "Level %s\n"
+msgstr "Úroveƈ %s\n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The passwords do not match"
-msgstr "Hesla nejsou shodnĂĄ"
+msgid "Luxembourg"
+msgstr "Lucembursko"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "(already added %s)"
-msgstr "(uĆŸ byl pƙidĂĄn %s)"
+msgid ""
+"\n"
+" DrakBackup Daemon Report\n"
+"\n"
+"\n"
+msgstr ""
+"\n"
+" Report démonu pro DrackBackup\n"
+"\n"
+"\n"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to compilation tools"
-msgstr "pƙístup k nástrojƯm pro kompilaci"
+msgid "Iran"
+msgstr "Írán"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "access to network tools"
-msgstr "pƙístup k sĂ­Ć„ovĂœm nĂĄstrojĆŻm"
+msgid "Bus"
+msgstr "Sběrnice"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to administrative files"
-msgstr "pƙístup k administrativním souborƯm"
+msgid "Iraq"
+msgstr "IrĂĄk"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "allow \"su\""
-msgstr "povolit \"su\""
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr "NaĆĄel jsem moĆŸnĂœ konflikt v současnĂ©m nastavenĂ­ LAN adresy pro %s!\n"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "access to rpm tools"
-msgstr "pƙístup k rpm nástrojƯm"
+msgid "Configuring..."
+msgstr "Nastavuji..."
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "access to X programs"
-msgstr "pƙístup k programƯm v X prostƙedí"
+msgid "The setup has already been done, and it's currently enabled."
+msgstr "NastavenĂ­ jiĆŸ bylo provedeno, nynĂ­ je povoleno."
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
msgstr ""
-"Tady jsou vĆĄechny zĂĄznamy.\n"
-"MĆŻĆŸete pƙidat dalĆĄĂ­ nebo změnit stĂĄvajĂ­cĂ­."
+"Modul bttv jĂĄdra operačnĂ­ho systĂ©mu GNU/Linux nalezne sprĂĄvnĂ© parametry "
+"automaticky pro větơinu moderních TV karet.\n"
+"Je-li vaĆĄe karta ĆĄpatně detekovĂĄna, lze nastavit sprĂĄvnĂœ typ karty a tuneru "
+"ručně zde. Pokud je to potƙeba, vyberte takĂ© parametry vaĆĄĂ­ TV karty."
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Other OS (windows...)"
-msgstr "JinĂœ systĂ©m (Windows...)"
+msgid "Password (again)"
+msgstr "Heslo (podruhé)"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "JinĂœ systĂ©m (MacOs...)"
+msgid "Search installed fonts"
+msgstr "Hledåm instalované fonty"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "JinĂœ systĂ©m (SunOs...)"
+msgid "Venezuela"
+msgstr "Venezuela"
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Linux"
-msgstr "Linux"
+msgid "IP address"
+msgstr "IP adresa"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "JakĂœ typ zĂĄznamu chcete pƙidat?"
+msgid "Choose the sizes"
+msgstr "Zvolte velikosti"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This label is already used"
-msgstr "Tato značka se jiĆŸ pouĆŸĂ­vĂĄ"
+msgid ""
+"List of data corrupted:\n"
+"\n"
+msgstr ""
+"Seznam poĆĄkozenĂœch dat:\n"
+"\n"
-#: ../../any.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "You must specify a root partition"
-msgstr "MusĂ­te zadat koƙenovĂœ oddĂ­l"
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
+msgstr ""
+"Våƥ modem není systémem podporovån.\n"
+"PodĂ­vejte se na strĂĄnky http://www.linmodems.org"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You must specify a kernel image"
-msgstr "MusĂ­te zadat soubor s jĂĄdrem"
+msgid "Choose another partition"
+msgstr "Vyberte jinĂœ oddĂ­l"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Empty label not allowed"
-msgstr "Prázdná značka není povolena"
+msgid "Current user"
+msgstr "AktuĂĄlnĂ­ uĆŸivatel"
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Default"
-msgstr "VĂœchozĂ­"
+msgid "Username"
+msgstr "UĆŸivatelskĂ© jmĂ©no"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "NoVideo"
-msgstr "Bez Videa"
+msgid "Left \"Windows\" key"
+msgstr "LevĂĄ klĂĄvesa \"Windows\""
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Initrd-size"
-msgstr "Initrd-velikost"
+msgid "dhcpd Server Configuration"
+msgstr "NastavenĂ­ serveru dhcpd"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Append"
-msgstr "Pƙipojit"
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
+msgstr ""
+"PouĆŸito pro adresáƙ:\n"
+" pouze vlastnĂ­k adresáƙe nebo souboru v tomto adresáƙi jej mĆŻĆŸe smazat"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Label"
-msgstr "Značka"
+msgid "Guyana"
+msgstr "Guyana"
-#: ../../any.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Unsafe"
-msgstr "NejistĂœ"
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr " na serveru Novell \"%s\", tiskĂĄrna \"%s\""
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Table"
-msgstr "Tabulka"
+msgid "Remove a module"
+msgstr "Odebrat modul"
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Root"
-msgstr "KoƙenovĂœ(root)"
+msgid "Password"
+msgstr "Heslo"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Read-write"
-msgstr "Pro čtení i zápis"
+msgid ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
+msgstr ""
+"Argumenty: (max, inactive=-1)\n"
+"\n"
+"Nastaví dobu platnosti hesla na \\fImax\\fP dnƯ a prodlevu mezi změnami na "
+"\\fIinactive\\fP."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid "Advanced Configuration"
+msgstr "Rozơíƙená konfigurace"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Video mode"
-msgstr "TextovĂœ reĆŸim"
+msgid "Scanning on your HP multi-function device"
+msgstr "Vyhledávám multifunkční zaƙízení od HP"
#: ../../any.pm:1
#, c-format
-msgid "Image"
-msgstr "Obraz(image)"
+msgid "Root"
+msgstr "KoƙenovĂœ(root)"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Default OS?"
-msgstr "VĂœchozĂ­ OS?"
+msgid "Choose an existing RAID to add to"
+msgstr "Zvolte existující RAID pro pƙidání"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Enable OF Boot?"
-msgstr "Povolit zavaděč OF?"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "Turecké (moderní model \"Q\")"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Enable CD Boot?"
-msgstr "Povolit spuơtění z CD?"
+msgid "Lilo message not found"
+msgstr "ZprĂĄva LiLo nebyla nalezena"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Prodleva pƙi spuơtění"
+msgid ""
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
+msgstr ""
+"Automatická generace hlavičky jádra v adresáƙi /boot\n"
+"pro soubory /usr/include/linux/{autoconf,version}.h"
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Open Firmware Delay"
-msgstr "Prodleva pro firmware"
+msgid "if needed"
+msgstr "pokud je potƙeba"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Boot device"
-msgstr "Startovací zaƙízení"
+msgid "Restore Failed..."
+msgstr "Obnova selhala..."
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Init Message"
-msgstr "Úvodní zpráva"
+msgid "/Autodetect _jazz drives"
+msgstr "/Automaticky detekovat _jazz disky"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bootloader to use"
-msgstr "Zaváděcí program"
+msgid ""
+"Description:\n"
+"\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
+"\n"
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
+"\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
+"\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
+"\n"
+"\n"
+msgstr ""
+"Popis:\n"
+"\n"
+" DrakBackup je nåstroj na zålohovåní systému.\n"
+" Během konfigurace mĆŻĆŸete vybrat: \n"
+"\t- Systémové soubory,\n"
+"\t- Soubory uĆŸivatelĆŻ,\n"
+"\t- OstatnĂ­ soubory.\n"
+"\tnebo CelĂœ systĂ©m a jinĂ© (jako jsou oddĂ­ly s Windows).\n"
+"\n"
+" DrakBackup dovoluje zĂĄlohovat na:\n"
+"\t- PevnĂœ disk.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (se spuơtěním, záchranou a autoinstalací).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- WebDAV.\n"
+"\t- PĂĄskovou jednotku.\n"
+"\n"
+" DrakBackup dovoluje provĂ©st obnovu do vybranĂ©ho adresáƙe.\n"
+"\n"
+" Jako vĂœchozĂ­ jsou umĂ­stěny vĆĄechny zĂĄlohy do adresáƙe\n"
+" /var/lib/drakbackup \n"
+"\n"
+" Konfigurační soubor:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"\n"
+"Postup pƙi obnově:\n"
+"\n"
+" Pƙi provádění obnovy odstraní DrakBackup pƯvodní adresáƙ\n"
+" a ověƙí, ĆŸe zĂĄlohovanĂ© soubory nejsou poĆĄkozeny.\n"
+" Doporučuje se ale provĂ©st zĂĄlohu těchto dat pƙed provedenĂ­m\n"
+" obnovy.\n"
+"\n"
+"\n"
-#: ../../any.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "Bootloader main options"
-msgstr "Základní nastavení zaváděcího programu"
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
+msgstr ""
+"Úvod\n"
+"\n"
+"OperačnĂ­ systĂ©m a rĆŻznĂ© části dostupnĂ© v distribuci Mandrake Linux jsou "
+"nazĂœvĂĄny \"SoftwarovĂ© produkty\" (\"Software Products\"). SoftwarovĂ© "
+"produkty zahrnujĂ­, ale nejsou omezeny, na programy, metody, pravidla a "
+"dokumentaci, vztahujĂ­cĂ­ se k operačnĂ­mu systĂ©mu a dalĆĄĂ­m komponentĂĄm "
+"distribuce Mandrake Linux.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
-#: ../../any.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
+"the progress bar x coordinate\n"
+"of its upper left corner"
msgstr ""
-"Volba ''OmezenĂ­ nastavenĂ­ z pƙíkazovĂ© ƙádky'' je bezpƙedmětnĂ© bez hesla"
+"umístění x souƙadnice pro\n"
+"levĂœ hornĂ­ roh liĆĄty s prĆŻběhem"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Give the ram size in MB"
-msgstr "Zadejte velikost paměti v MB"
+msgid "Current interface configuration"
+msgstr "AktuĂĄlnĂ­ nastavenĂ­ rozhranĂ­"
-#: ../../any.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Enable multiple profiles"
-msgstr "Povolit vĂ­ce profilĆŻ"
+msgid "LPD - Line Printer Daemon"
+msgstr "LPD - DĂ©mon pro tiskĂĄrny"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Pokud je tƙeba, upƙesněte velikost paměti (nalezeno %d MB)"
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
+msgstr ""
+"\n"
+"Jestli mĂĄte ISA kartu, měly by bĂœt hodnoty na nĂĄsledujĂ­cĂ­ obrazovce "
+"språvné.\n"
+"\n"
+"Jestli mĂĄte PCMCIA kartu, musĂ­te znĂĄt jejĂ­ IRQ a IO.\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Vyčistit /tmp pƙi kaĆŸdĂ©m startu"
+msgid "Do not print any test page"
+msgstr "Netisknout testovacĂ­ strĂĄnku"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Create a bootdisk"
-msgstr "StartovacĂ­ disketa"
+msgid "Gurmukhi"
+msgstr "Gurmutské"
#: ../../any.pm:1
#, c-format
-msgid "restrict"
-msgstr "omezenĂ­"
+msgid "Force No APIC"
+msgstr "Vnutit No APIC"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restrict command line options"
-msgstr "OmezenĂ­ nastavenĂ­ z pƙíkazovĂ© ƙádky"
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr "Toto heslo je pƙíliĆĄ jednoduchĂ© (musĂ­ bĂœt alespoƈ %d znakĆŻ dlouhĂ©)"
-#: ../../any.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Force No APIC"
-msgstr "Vnutit No APIC"
+msgid "[keyboard]"
+msgstr "[klĂĄvesnice]"
-#: ../../any.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Enable ACPI"
-msgstr "Povolit ACPI"
+msgid "FTP proxy"
+msgstr "FTP proxy"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Delay before booting default image"
-msgstr "Prodleva pƙed automatickĂœm spuĆĄtěnĂ­m"
+msgid "Install List"
+msgstr "Instalovat seznam"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "compact"
-msgstr "kompaktnĂ­"
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr ""
+"Změnit adresáƙ\n"
+"pro obnovu"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Compact"
-msgstr "KompaktnĂ­"
+msgid "Show only for the selected day"
+msgstr "Zobrazit pouze pro vybranĂœ den"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Bootloader installation"
-msgstr "Instalace zaváděcího programu"
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
+"\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
+"\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
+"Pƙehled drakTermServ\n"
+"\t\t\t \n"
+" - Vytváƙí zaváděcí obrazy pro Etherboot:\n"
+" \t\tChcete-li zavĂ©st jĂĄdro skrz etherboot, musĂ­te vytvoƙit zvlĂĄĆĄtnĂ­ "
+"kombinaci jĂĄdra a initrd.\n"
+" \t\tVětơinu práce za vás udělá mkinitrd-net a drakTermServ je pouze "
+"grafické rozhraní\n"
+" \t\tpro pomoc se správou či pƙizpƯsobením těchto obrazƯ.\n"
+"\n"
+" - UdrĆŸuje /etc/dhcpd.conf:\n"
+" \t\tKaĆŸdĂœ ze sĂ­Ć„ově zavĂĄděnĂœch klientĆŻ potƙebuje zĂĄznam v dhcpd."
+"conf, kterĂœ mu pƙiƙadĂ­ IP adresu\n"
+" \t\ta sĂ­Ć„ovĂœ zavĂĄděcĂ­ obraz pro danĂœ počítač. drakTermServ umoĆŸnĂ­ "
+"tvorbu nebo odstranění těchto záznamƯ.\n"
+"\t\t\t\n"
+" \t\t(U PCI karet lze vynechat obraz - etherboot si vyĆŸĂĄdĂĄ sprĂĄvnĂœ "
+"obraz. Měli byste\n"
+" \t\ttakĂ© vzĂ­t v Ășvahu, ĆŸe kdyĆŸ hledĂĄ etherboot obrazy, očekĂĄvĂĄ nĂĄzvy "
+"jako\n"
+" \t\tboot-3c59x.nbi, a ne boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tTypickĂœ soubor dhcpd.conf podporujĂ­cĂ­ bezdiskovĂ© klienty vypadĂĄ "
+"jako:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tI kdyĆŸ mĆŻĆŸete pouĆŸĂ­t rozsah IP adres mĂ­sto nastavenĂ­ specifickĂ©ho "
+"zĂĄznamu pro\n"
+"\t\t\tpočítač klienta, pouĆŸitĂ­ pevnĂ© adresy vĂĄm umoĆŸnĂ­ zadat funkcionalitu\n"
+"\t\t\tdo souborƯ s nastavením pro specifického klienta, které poskytuje "
+"ClusterNFS.\n"
+"\t\t\t\n"
+"\t\t\tPoznĂĄmka: PoloĆŸku \"#type\" pouĆŸĂ­vĂĄ pouze drakTermServ. Klienti mohou "
+"bĂœt buď \"thin\"\n"
+"\t\t\tnebo \"fat\". Tencí klienti provozují větơinu software na serveru "
+"pomocí xdmcp, tlustí klienti provozují větơinu\n"
+"\t\t\tsoftware na klientskĂ©m počítači. ZvlĂĄĆĄtnĂ­ inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$, je\n"
+"\t\t\tvytvoƙen pro tenkĂ©ho klienty. SystĂ©movĂ© soubory s nastavenĂ­m xdm-"
+"config, kdmrc a gdm.conf jsou upraveny\n"
+"\t\t\tpƙi pouĆŸitĂ­ tenkĂœch klientĆŻ tak, aby povolovaly xdmcp. JelikoĆŸ pƙi "
+"pouĆŸitĂ­ xdmcp vznikajĂ­ bezpečnostnĂ­ rizika,\n"
+"\t\t\tjsou upraveny soubory hosts.deny a hosts.allow tak, aby omezily "
+"pƙístup pouze z lokální sítě.\n"
+"\t\t\t\n"
+"\t\t\tPoznámka: Po pƙidání nebo odebrání klientƯ musíte zastavit a znovu "
+"spustit server.\n"
+"\t\t\t\n"
+" - UdrĆŸuje /etc/exports:\n"
+" \t\tClusterNFS dovoluje exportovat koƙenovĂœ souborovĂœ systĂ©m na "
+"bezdiskové klienty. drakTermServ\n"
+" \t\tnastavĂ­ odpovĂ­dajĂ­cĂ­ zĂĄznam tak, aby umoĆŸnil anonymnĂ­ pƙístup ke "
+"koƙenovĂ©mu souborovĂ©mu systĂ©mu\n"
+" \t\tbezdiskovĂœm klientĆŻm.\n"
+"\n"
+" \t\tTypickĂœ zĂĄznam pro export ClusterNFS vypadĂĄ:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tSe SUBNET/MASK odpovĂ­dajĂ­cĂ­ vaĆĄĂ­ sĂ­ti.\n"
+" \t\t\n"
+" - UdrĆŸuje /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tAby se mohli uĆŸivatelĂ© pƙihlĂĄsit do systĂ©mu z bezdiskovĂœch "
+"stanic, musĂ­ bĂœt duplikovĂĄn\n"
+" \t\tjejich zĂĄznam z /etc/shadow v /etc/shadow\\$\\$CLIENTS\\$\\$. "
+"drakTermServ v tomto ohledu\n"
+" \t\tpomĂĄhĂĄ pƙidĂĄnĂ­m nebo odebrĂĄnĂ­m uĆŸivatelĆŻ systĂ©mu z tohoto "
+"souboru.\n"
+"\n"
+" - /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$ pro kaĆŸdĂ©ho klienta:\n"
+" \t\tSkrze ClusterNFS mĆŻĆŸe mĂ­t kaĆŸdĂœ bezdiskovĂœ klient svĂ© vlastnĂ­ "
+"unikĂĄtnĂ­ soubory s nastavenĂ­m\n"
+" \t\tumĂ­stěnĂ© na serveru v koƙenovĂ©m souborovĂ©m systĂ©mu. drakTermServ "
+"bude v budoucnu pomĂĄhat\n"
+" \t\ts tvorbou těchto souborƯ.\n"
+"\n"
+" - Soubory s nastavenĂ­m systĂ©mu pro kaĆŸdĂ©ho klienta:\n"
+" \t\tSkrze ClusterNFS mĆŻĆŸe mĂ­t kaĆŸdĂœ bezdiskovĂœ klient svĂ© vlastnĂ­ "
+"unikĂĄtnĂ­ soubory s nastavenĂ­m\n"
+" \t\tumĂ­stěnĂ© na serveru v koƙenovĂ©m souborovĂ©m systĂ©mu. drakTermServ "
+"bude v budoucnu pomĂĄhat\n"
+" \t\ts tvorbou těchto souborƯ,\n"
+" \t\tnapƙ. /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard zvlĂĄĆĄĆ„ pro\n"
+" \t\tkaĆŸdĂ©ho klienta.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ nastavĂ­ tento soubor tak, aby pracoval v souladu s "
+"obrazy vytvoƙenĂœmi pomocĂ­\n"
+" \t\tmkinitrd-net a zĂĄznamy v /etc/dhcpd.conf tak, aby byl kaĆŸdĂ©mu "
+"bezdiskovému klientu poskytnut\n"
+" \t\todpovídající zaváděcí obraz.\n"
+"\n"
+" \t\tTypickĂœ soubor s nastavenĂ­m tftp vypadĂĄ takto:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tZměny oproti vĂœchozĂ­ instalaci zahrnujĂ­ změnu pƙíznaku disable "
+"na\n"
+" \t\t'no' a změnu cesty adresáƙe na /var/lib/tftpboot, kam ukládá\n"
+" \t\tmkinitrd-net své obrazy.\n"
+"\n"
+" - Vytváƙí diskety a CD etherboot:\n"
+" \t\tBezdiskovĂ© klientskĂ© počítače potƙebujĂ­ buď obrazy ROM na NIC, "
+"nebo zaváděcí disketu\n"
+" \t\tnebo CD, aby mohly spustit zaváděcí sekvenci. drakTermServ "
+"pomĆŻĆŸe tyto zavĂĄděcĂ­ obrazy generovat,\n"
+" \t\tv zåvislosti na NIC na klientském stroji.\n"
+" \t\t\n"
+" \t\tZákladní pƙíklad ručního vytvoƙení zaváděcího obrazu diskety pro "
+"kartu 3Com 3c509:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "First sector of boot partition"
-msgstr "PrvnĂ­ sektor zavĂĄděcĂ­ho diskovĂ©ho oddĂ­lu"
+msgid "512 kB"
+msgstr "512 kB"
-#: ../../any.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "PrvnĂ­ sektor disku (MBR)"
+msgid "Logs"
+msgstr "Logy"
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Kam chcete nainstalovat zaváděcí program?"
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr "(Pozn: ParalelnĂ­ porty nepouĆŸĂ­vajĂ­ autodetekci)"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "LILO/grub Installation"
-msgstr "Instalace LILO/Grub"
+msgid "<control>N"
+msgstr "<control>N"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "SILO Installation"
-msgstr "Instalace SILO"
+msgid "What kind of card do you have?"
+msgstr "JakĂœ typ karty mĂĄte?"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Skip"
-msgstr "Pƙeskočit"
+msgid "<control>O"
+msgstr "<control>O"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
-msgid "On Floppy"
-msgstr "Na disketu"
+msgid "Security"
+msgstr "Bezpečnost"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "First sector of the root partition"
-msgstr "PrvnĂ­ sektor koƙenovĂ©ho oddĂ­lu"
+msgid ""
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
+msgstr ""
+"Lze takĂ© pouĆŸĂ­t grafickĂ© rozhranĂ­ \"xpdq\" pro nastavenĂ­ moĆŸnostĂ­ a ke "
+"sprĂĄvě tiskovĂœch Ășloh.\n"
+"Pokud pouĆŸĂ­vĂĄte grafickĂ© prostƙedĂ­ KDE, mĂĄte na pracovnĂ­ ploĆĄe ikonu "
+"pojmenovanou \"STOP Printer!\", kterĂœ po klepnutĂ­ ihned zastavĂ­ vĆĄechny "
+"tiskovĂ© Ășlohy. To je vhodnĂ© tƙeba pro pƙípady uvĂ­znutĂ­ papĂ­ru.\n"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#, c-format
+msgid "<control>Q"
+msgstr "<control>K"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Unknown"
+msgstr "NeznĂĄmĂœ"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr "Tento server je jiĆŸ na seznamu, nelze jej tedy opět pƙidat.\n"
+
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#, c-format
+msgid "Network Configuration"
+msgstr "Nastavení sítě"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>S"
+msgstr "<control>U"
+
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
msgstr ""
-"Rozhodli jste se nainstalovat zavaděč systĂ©mu na oddĂ­l.\n"
-"To znamenĂĄ, ĆŸe jiĆŸ zavaděč na disku, ze kterĂ©ho spouĆĄtĂ­te systĂ©m nějakĂœ je "
-"(napƙ. System Commander).\n"
-"\n"
-"Ze kterého disku spouƥtíte systém?"
+"Protokol pouĆŸitĂœ ve zbytku světa \n"
+" ĆŸĂĄdnĂœ D-kanĂĄl (leased lines)"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Creating bootdisk..."
-msgstr "Vytváƙím startovací disketu"
+msgid "Option %s must be a number!"
+msgstr "Hodnota %s musĂ­ bĂœt číslo!"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
#, c-format
-msgid "Insert a floppy in %s"
-msgstr "VloĆŸte disketu do %s"
+msgid "Notice"
+msgstr "PoznĂĄmka"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Zvolte mechaniku, kde chcete vytvoƙit startovací disketu"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
+msgstr ""
+"Argumenty: (arg)\n"
+"\n"
+" PovolĂ­/ZakĂĄĆŸe provĂĄděnĂ­ dennĂ­ch bezpečnostnĂ­ch kontrol."
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Second floppy drive"
-msgstr "druhé mechaniky"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
+"Argumenty: (arg)\n"
+"\n"
+"PovolĂ­/zakĂĄĆŸe pƙíkaz crontab a at pro uĆŸivatele. VyjmenovanĂ­ uĆŸivatelĂ© se\n"
+"zapĂ­ĆĄou do /etc/cron.allow a /etc/at.allow\n"
+"(vĂ­ce man at(1) a crontab(1))."
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "First floppy drive"
-msgstr "prvnĂ­ mechaniky"
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr "Nemáte nastaveno X. Opravdu je potƙebujete?"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "BohuĆŸel nenĂ­ dostupnĂĄ ĆŸĂĄdnĂĄ disketovĂĄ mechanika"
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
+"Konfigurace tĂ©to tiskĂĄrny je plně automatickĂĄ. Pokud nebyla tiskĂĄrna sprĂĄvně "
+"detekována nebo preferujete vlastní nastavení tisku, zvolte \"Ruční "
+"konfigurace\"."
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "What type of partitioning?"
+msgstr "JakĂœ typ diskovĂ©ho oddĂ­lu?"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
+"file list sent by FTP: %s\n"
+" "
msgstr ""
-"PomocĂ­ startovacĂ­ diskety mĆŻĆŸete spustit Linux bez pouĆŸitĂ­ normĂĄlnĂ­ho\n"
-"zavĂĄděcĂ­ho programu (bootloader). To je uĆŸitečnĂ© pokud nechcete instalovat\n"
-"LILO (nebo Grub), nebo jinĂœ operačnĂ­ systĂ©m odstranĂ­ LILO, nebo LILO\n"
-"na vaĆĄem počítači nefunguje. VlastnĂ­ startovacĂ­ disketa takĂ© mĆŻĆŸe bĂœt\n"
-"pouĆŸita spolu s \"Mandrake zĂĄchrannĂœm diskem\" (rescue image), coĆŸ "
-"poskytuje\n"
-"Ășčinnou pomoc pƙi havĂĄrii systĂ©mu. Chcete vytvoƙit startovacĂ­ disketu?\n"
-"%s"
+"seznam souborĆŻ poslanĂœ pƙes FTP: %s\n"
+" "
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
+msgid "Interface"
+msgstr "RozhranĂ­"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
+"Options Description:\n"
+"\n"
+" - Backup System Files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
"\n"
+" - Backup User Files: \n"
+"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
+"\n"
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane. To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
msgstr ""
+"popis voleb:\n"
+"\n"
+"- ZĂĄloha systĂ©movĂœch souborĆŻ:\n"
+" \n"
+"\tTato volba zĂĄlohuje adresáƙ /etc, kterĂœ obsahuje vĆĄechny\n"
+"\tkonfigurační soubory. Dávejte pozor pƙi obnově na to,\n"
+"\taby se nepƙepsaly soubory:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - ZĂĄlohovat soubory uĆŸivatelĆŻ:\n"
+"\n"
+"\tTato volba dovoluje vybrat vĆĄechny uĆŸivatele, kterĂ©\n"
+"\t\tchcete zĂĄlohovat.\n"
+"\tAby se uĆĄetƙilo mĂ­sto na disku, nenĂ­ dobrĂ© zahrnout cache\n"
+"\tod prohlĂ­ĆŸeče.\n"
+"\n"
+" - ZĂĄlohovat ostatnĂ­ soubory:\n"
+"\n"
+"\tTato volba dovolí pƙidat dalơí data pro zálohování.\n"
+"\tV současnosti nenĂ­ moĆŸnĂ© pƙi tomto zĂĄlohovĂĄnĂ­ zvolit\n"
+"\tpƙírĆŻstkovĂ© zĂĄlohovĂĄnĂ­.\t\n"
+"\n"
+" - PƙírĆŻstkovĂ© zĂĄlohovĂĄnĂ­:\n"
+"\n"
+"\tPƙírĆŻstkovĂ© zĂĄlohovĂĄnĂ­ je velmi mocnĂœ druh zĂĄlohovĂĄnĂ­,\n"
+"\tprotoĆŸe dovoluje zĂĄlohovat vĆĄechna data pouze poprvĂ©\n"
+"\ta dále se zálohují pouze změny.\n"
+"\tBěhem obnovy tak budete moci zadat, od jakĂ©ho data se\n"
+"\tmajĂ­ data obnovit.\n"
+"\tPokud nezvolĂ­te tuto moĆŸnost, bude pƙi kaĆŸdĂ© zĂĄloze\n"
+"\tpƙedchozí záloha smazána.\n"
"\n"
"\n"
-"(VAROVÁNÍ! Pro koƙenovĂœ oddĂ­l pouĆŸĂ­vĂĄte XFS, vytvoƙenĂ­ \n"
-"spouĆĄtěcĂ­ diskety bude zƙejmě neĂșspěơnĂ©, protoĆŸe XFS\n"
-"potƙebuje velmi velkĂœ ovladač)"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
msgstr ""
-"PomocĂ­ startovacĂ­ diskety je moĆŸnĂ© spustit systĂ©m Linux bez zĂĄvislosti na\n"
-"zavaděči systĂ©mu. To je uĆŸitečnĂ© tƙeba v pƙípadě, ĆŸe nechcete instalovat "
-"SILO\n"
-"na počítač, nebo jinĂœ operačnĂ­ systĂ©m SILO pƙepsal nebo SILO nepracuje "
-"správně\n"
-"s hardwarovou konfiguracĂ­. VlastnĂ­ startovacĂ­ disketa je takĂ© uĆŸitečnĂĄ "
-"tehdy,\n"
-"pokud je potƙeba provĂ©st opravu systĂ©mu po pƙedchozĂ­m selhĂĄnĂ­.\n"
+"Argumenty: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"Pokud chcete vytvoƙit startovacĂ­ disketu, vloĆŸte disketu do mechaniky\n"
-"a stiskněte \"OK\"."
+"PovolĂ­/zakĂĄĆŸe vĂœpis syslog hlĂĄĆĄek na konzoli 12. VĂœraz \\fIexpr\\fP\n"
+"určuje, co se bude logovat (více detailƯ najdete v nápovědě syslog.conf(5))\n"
+"a dev určuje na kterĂ© zaƙízenĂ­ se bude log posĂ­lat."
-#: ../../bootloader.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Zaváděcí program nelze nainstalovat na oddíl %s\n"
+msgid "comma separated strings"
+msgstr "čárkou oddělenĂ© znakovĂ© ƙetězce"
-#: ../../bootloader.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "not enough room in /boot"
-msgstr "není dost místa v adresáƙi /boot"
+msgid "These are the machines from which the scanners should be used:"
+msgstr "Zde je seznam počítačƯ, ze kterĂœch je moĆŸnĂ© vyuĆŸĂ­t skenery: "
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Vybrana polozka bude automaticky spustena za %d sekund."
+msgid "Messages"
+msgstr "ZprĂĄvy"
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "spoustecich parametru, nebo 'c' pro prikazovou radku."
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr "NeznĂĄmĂĄ|CPH06X (bt878) [vĂ­ce dodavatelĆŻ]"
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Stisknete ENTER pro start vybraného OS, 'e' pro upravu"
+msgid "POP and IMAP Server"
+msgstr "POP a IMAP server"
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Pro vyber polozek pouzijte klavesy %c a %c."
+msgid "Mexico"
+msgstr "Mexiko"
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Vita Vas GRUB, program pro vyber operacniho systemu"
+msgid "Model stepping"
+msgstr "Číslování modelu"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Rwanda"
+msgstr "Rwanda"
-#: ../../bootloader.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Grub"
-msgstr "Grub"
+msgid "Do you have any %s interfaces?"
+msgstr "MĂĄte nějakĂ© %s rozhranĂ­?"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with text menu"
-msgstr "LILO s textovou nabĂ­dkou"
+msgid "Switzerland"
+msgstr "Ć vĂœcarsko"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO s grafickou nabĂ­dkou"
+msgid "Brunei Darussalam"
+msgstr "Brunei Darussalam"
-#: ../../bootloader.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Remote lpd Printer Options"
+msgstr "MoĆŸnosti vzdĂĄlenĂ© lpd tiskĂĄrny"
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
"\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
msgstr ""
-"Vita Vas %s, program pro start operacniho systemu!\n"
+"GNU/Linux je vĂ­ceuĆŸivatelskĂœ systĂ©m, coĆŸ znamenĂĄ, ĆŸe kaĆŸdĂœ uĆŸivatel mĆŻĆŸe\n"
+"mĂ­t svĂ© vlastnĂ­ nastavenĂ­, soubory atd. VĂ­ce se dočtete v pƙíručce \"ZačínĂĄme"
+"\".\n"
+"Na rozdĂ­l od uĆŸivatele root, kterĂœ je sprĂĄvcem počítače, uĆŸivatelĂ©, kteƙí "
+"jsou\n"
+"zde vytvoƙeni, nemajĂ­ oprĂĄvněnĂ­ měnit nic kromě svĂœch vlastnĂ­ch souborĆŻ a\n"
+"nastavenĂ­. Doporučuje se vytvoƙit Ășčet pro minimĂĄlně jednoho bÄ›ĆŸnĂ©ho "
+"uĆŸivatele.\n"
+"Tento Ășčet se pouĆŸĂ­vĂĄ na vĆĄechny bÄ›ĆŸnĂ© Ășkoly. Ačkoliv je velmi praktickĂ©\n"
+"pƙihlaĆĄovat se kaĆŸdĂœ den jako uĆŸivatel root, je to takĂ© velmi nebezpečnĂ©!\n"
+"Jedna malĂĄ chyba mĆŻĆŸe zpĆŻsobit, ĆŸe celĂœ operačnĂ­ systĂ©m jiĆŸ nebude funkčnĂ­.\n"
+"Pokud udělĂĄte chybu jako normĂĄlnĂ­ uĆŸivatel, mĆŻĆŸete pƙijĂ­t pouze o svĂ© "
+"informace,\n"
+"ale nepoĆĄkodĂ­ se celĂœ systĂ©m.\n"
"\n"
-"Vyberte si ze seznamu operacnich systemu nize nebo\n"
-"pockejte %d vterin pro automaticky start.\n"
+"Jako prvnĂ­ zadejte vaĆĄe skutečnĂ© jmĂ©no. To nenĂ­ samozƙejmě povinnĂ© - mĆŻĆŸete\n"
+"zadat co chcete. Aplikace DrakX pouĆŸije prvnĂ­ slovo jako uĆŸivatelskĂ© jmĂ©no,\n"
+"pod kterĂœm se bude uĆŸivatel hlĂĄsit do systĂ©mu, a pƙedvyplnĂ­ jej do políčka\n"
+"\"UĆŸivatelskĂ© jmĂ©no\". To je moĆŸnĂ© nĂĄsledně změnit.\n"
+"DĂĄle se zadĂĄvĂĄ heslo pro uĆŸivatele. Volba hesla pro normĂĄlnĂ­ uĆŸivatele sice "
+"nenĂ­\n"
+"z hlediska bezpečnosti tak kritická jako v pƙípadě správce, ale i tak se "
+"doporučuje\n"
+"ji nepodceƈovat; koneckoncĆŻ, jde o zabezpečenĂ­ souborĆŻ tohoto uĆŸivatele.\n"
"\n"
+"Pokud klepnete na \"Pƙidat uĆŸivatele\", mĆŻĆŸete pƙidĂĄvat uĆŸivatelĆŻ, kolik\n"
+"potƙebujete, napƙ. svĂ© pƙátele, Ășčet pro otce či sestru. Pokud mĂĄte vĆĄechny\n"
+"uĆŸivatele vytvoƙeny, klepněte na tlačítko \"Hotovo\". \n"
+"\n"
+"KlepnutĂ­m na tlačítko \"RozơíƙenĂ©\" mĆŻĆŸete pro novĂœ Ășčet změnit shell, "
+"kterĂœ\n"
+"bude uĆŸivatel pouĆŸĂ­vat (vĂœchozĂ­ je bash)."
-#: ../../common.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "consolehelper missing"
-msgstr "chybĂ­ consolehelper"
+msgid "Configure Internet Access..."
+msgstr "Nastavuji pƙístup na Internet..."
-#: ../../common.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "kdesu missing"
-msgstr "chybĂ­ kdesu"
+msgid "Norway"
+msgstr "Norsko"
-#: ../../common.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "SejmutĂ© obrazovky budou dostupnĂ© po instalaci v adresáƙi %s"
+msgid "Danish"
+msgstr "Dånské"
-#: ../../common.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "Nelze provĂ©st sejmutĂ­ obrazovky pƙed rozdělenĂ­m diskĆŻ"
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
+msgstr ""
+"Automaticky nastaví podporu numerické klåvesnice v konzoli\n"
+"a v XFree pƙi startu."
-#: ../../common.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "%d seconds"
-msgstr "%d sekund"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+"Prosím zadejte IP nastavení pro tento počítač.\n"
+"KaĆŸdĂĄ poloĆŸka musĂ­ bĂœt zadĂĄna jako IP adresa v 'desetinnĂ©' formě\n"
+"(napƙíklad 1.2.3.4)."
-#: ../../common.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "1 minute"
-msgstr "1 minuta"
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
+msgstr ""
+"Distribuce Mandrake Linux je sloĆŸena z několika CD. InstalačnĂ­ program vĂ­,\n"
+"na kterĂ©m disku je umĂ­stěn jakĂœ soubor a v pƙípadě potƙeby vysune CD a "
+"vyĆŸĂĄdĂĄ\n"
+"si vĂœměnu CD za poĆŸadovanĂ©."
-#: ../../common.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "%d minutes"
-msgstr "%d minut(y)"
+msgid "Processors"
+msgstr "Procesory"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "TB"
-msgstr "TB"
+msgid "Bulgaria"
+msgstr "Bulharsko"
-#: ../../common.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "GB"
-msgstr "GB"
+msgid "No NIC selected!"
+msgstr "NenĂ­ vybrĂĄna ĆŸĂĄdnĂĄ NIC!"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "MB"
-msgstr "MB"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr "Svalbard a Jan Mayen Islands"
-#: ../../common.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "KB"
-msgstr "kB"
+msgid ""
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
+msgstr ""
+"Vyskytl se problĂ©m během konfigurace.\n"
+"Otestujte pƙipojení k Internetu pomocí net_monitor nebo mcc. Pokud není "
+"spojení funkční, bude potƙeba asi znovu načíst konfiguraci"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "United States"
-msgstr "Spojené ståty americké"
+msgid "partition %s is now known as %s"
+msgstr "oddĂ­l %s je nynĂ­ rozpoznĂĄn jako %s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Austria"
-msgstr "Rakousko"
+msgid "Backup Other files..."
+msgstr "ZĂĄlohovat dalĆĄĂ­ soubory..."
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Italy"
-msgstr "ItĂĄlie"
+msgid "SMB server IP"
+msgstr "IP adresa SMB serveru"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Netherlands"
-msgstr "NizozemĂ­"
+msgid "Congo (Kinshasa)"
+msgstr "Kongo (Kinshasa)"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sweden"
-msgstr "Ơvédsko"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "Bude zapsĂĄna novĂĄ tabulka oddĂ­lĆŻ na disku %s!"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Norway"
-msgstr "Norsko"
+msgid "Installing HPOJ package..."
+msgstr "Instaluji balíček HPOJ..."
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Greece"
-msgstr "Ƙecko"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr ""
+"PomocĂ­ startovacĂ­ diskety mĆŻĆŸete spustit Linux bez pouĆŸitĂ­ normĂĄlnĂ­ho\n"
+"zavĂĄděcĂ­ho programu (bootloader). To je uĆŸitečnĂ© pokud nechcete instalovat\n"
+"LILO (nebo Grub), nebo jinĂœ operačnĂ­ systĂ©m odstranĂ­ LILO, nebo LILO\n"
+"na vaĆĄem počítači nefunguje. VlastnĂ­ startovacĂ­ disketa takĂ© mĆŻĆŸe bĂœt\n"
+"pouĆŸita spolu s \"Mandrake zĂĄchrannĂœm diskem\" (rescue image), coĆŸ "
+"poskytuje\n"
+"Ășčinnou pomoc pƙi havĂĄrii systĂ©mu. Chcete vytvoƙit startovacĂ­ disketu?\n"
+"%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Germany"
-msgstr "Německo"
+msgid ", USB printer \\#%s"
+msgstr ", USB tiskĂĄrna \\#%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Czech Republic"
-msgstr "Česká republika"
+msgid "Latvian"
+msgstr "Litevské"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belgium"
-msgstr "Belgie"
+msgid "monthly"
+msgstr "kaĆŸdĂœ měsĂ­c"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "France"
-msgstr "Francie"
+msgid "Module name"
+msgstr "NĂĄzev modulu"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Costa Rica"
-msgstr "Costa Rica"
+msgid "Start at boot"
+msgstr "Spustit pƙi startu"
-#: ../../fsedit.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental Backups"
+msgstr "PouĆŸĂ­t pƙírĆŻstkovou zĂĄlohu (nepƙepisovat starĆĄĂ­ zĂĄlohy)"
+
+#: ../../any.pm:1
#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Chyba pƙi otevírání %s pro zápis: %s"
+msgid "First sector of drive (MBR)"
+msgstr "PrvnĂ­ sektor disku (MBR)"
-#: ../../fsedit.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Nothing to do"
-msgstr "Nic nedělat"
+msgid "Joystick"
+msgstr "Joystick"
-#: ../../fsedit.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "NenĂ­ dostatek mĂ­sta pro automatickĂ© rozdělenĂ­ disku"
+msgid "El Salvador"
+msgstr "El Salvador"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Nelze pouĆŸĂ­t kryptovanĂœ souborovĂœ systĂ©m na pƙipojenĂœ bod %s"
+msgid "Use Unicode by default"
+msgstr "PouĆŸĂ­t Unicode jako vĂœchozĂ­"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-"Pro tento pƙípojnĂœ bod potƙebujete opravdovĂœ souborovĂœ systĂ©m (ext2/ext3, "
-"ReiserFS, XFS nebo JFS)\n"
+msgid "the module of the GNU/Linux kernel that handles the device"
+msgstr "modul jĂĄdra systĂ©mu GNU/Linux, kterĂœ ovlĂĄdĂĄ toto zaƙízenĂ­"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Tento adresáƙ musĂ­ kromě koƙenovĂ©ho souborovĂ©ho systĂ©mu zĆŻstat"
+msgid "Trying to rescue partition table"
+msgstr "PokouĆĄĂ­m se obnovit tabulku oddĂ­lĆŻ"
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Nelze pouĆŸĂ­t LVM LogickĂ©ho disku na pƙipojenĂœ bod %s"
+msgid "Option %s must be an integer number!"
+msgstr "Hodnota %s musĂ­ bĂœt celĂ© číslo!"
-#: ../../fsedit.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
+"Entries you'll have to fill:\n"
+"%s"
msgstr ""
-"Zvolili jste softwarovĂœ RAID oddĂ­l jako koƙenovĂœ oddĂ­l (/).\n"
-"S tĂ­m se nenĂ­ schopnĂœ vypoƙádat ĆŸĂĄdnĂœ zavĂĄděcĂ­ program bez pouĆŸitĂ­ oddĂ­lu\n"
-"/boot. Ujistěte se prosĂ­m, ĆŸe jste tento oddĂ­l pƙidali"
+"PoloĆŸky, kterĂ© je potƙeba vyplnit:\n"
+"%s"
-#: ../../fsedit.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "OddĂ­l s pƙípojnĂœm bodem %s uĆŸ existuje\n"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "Nelze spustit aktualizaci na bÄ›ĆŸĂ­cĂ­ systĂ©m !!!\n"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "NĂĄzev pƙípojnĂ©ho bodu mĆŻĆŸe obsahovat pouze pĂ­smena a číslice"
+msgid "Name: "
+msgstr "Jméno: "
-#: ../../fsedit.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "PƙípojnĂ© body (mount points) musĂ­ začínat '/'"
+msgid "16 million colors (24 bits)"
+msgstr "16 miliĂłnĆŻ barev (24 bitĆŻ)"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "NemĆŻĆŸete pouĆŸĂ­t ReiserFS pro oddĂ­l menĆĄĂ­ neĆŸ 32MB"
+msgid "Allow all users"
+msgstr "Povolit vĆĄem uĆŸivatelĆŻm"
-#: ../../fsedit.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "NemĆŻĆŸete pouĆŸĂ­t JFS pro oddĂ­l menĆĄĂ­ neĆŸ 16MB"
+msgid "The official MandrakeSoft Store"
+msgstr "Oficiální obchod společnosti MandrakeSoft"
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Resizing"
+msgstr "Měním velikost"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Cable connection"
+msgstr "KabelovĂ© pƙipojenĂ­"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "User"
+msgstr "UĆŸivatel"
#: ../../fsedit.pm:1
#, c-format
@@ -1018,1255 +1930,263 @@ msgstr ""
"\n"
"SouhlasĂ­te s tĂ­m, ĆŸe pƙijdete o vĆĄechny oddĂ­ly?\n"
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Error"
-msgstr "Chyba"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr "ProvĂ©st novou zĂĄlohu pƙed obnovou (pouze pro pƙírĆŻstkovou zĂĄlohu)"
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "server"
-msgstr "server"
+msgid "Printer on parallel port \\#%s"
+msgstr "TiskĂĄrna na paralelnĂ­m portu \\#%s"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "with /usr"
-msgstr "s /usr"
+msgid "Name"
+msgstr "NĂĄzev"
-#: ../../fsedit.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "simple"
-msgstr "jednoduchĂœ"
+msgid "mkraid failed"
+msgstr "mkraid neuspěl"
-#: ../../fs.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Enabling swap partition %s"
-msgstr "Aktivuji odklĂĄdacĂ­ oddĂ­l %s"
+msgid "Button 3 Emulation"
+msgstr "Emulace 3 tlačítka"
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "error unmounting %s: %s"
-msgstr "chyba odpojovĂĄnĂ­ %s: %s"
+msgid "Sending files..."
+msgstr "PosĂ­lĂĄm soubory..."
-#: ../../fs.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "pƙipojení oddílu %s v adresáƙi %s selhalo"
+msgid "Israeli (Phonetic)"
+msgstr "Izraelské (foneticky)"
-#: ../../fs.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mounting partition %s"
-msgstr "Pƙipojuji oddíl %s"
+msgid "access to rpm tools"
+msgstr "pƙístup k rpm nástrojƯm"
-#: ../../fs.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Checking %s"
-msgstr "Kontroluji %s"
+msgid "edit"
+msgstr "upravit"
-#: ../../fs.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Formatting partition %s"
-msgstr "FormĂĄtuji oddĂ­l %s"
+msgid "You must choose/enter a printer/device!"
+msgstr "Musíte vybrat/zadat tiskárnu/zaƙízení!"
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Vytváƙím a formátuji soubor %s"
+msgid "Permission problem accessing CD."
+msgstr "ProblĂ©my s prĂĄvy pƙi pƙístupu na CD."
-#: ../../fs.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "nevĂ­m jak naformĂĄtovat %s na typ %s"
+msgid "Phone number"
+msgstr "Telefonní číslo"
-#: ../../fs.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formátování %s skončilo chybou"
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr "Chyba: Ovladač \"%s\" pro vaơi zvukovou kartu není na seznamu"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Klepněte na \"Dále ->\", pokud chcete smazat vơechna data a oddíly na tomto\n"
-"pevnĂ©m disku. Buďte opatrnĂ­, po odklepnutĂ­ nelze obnovit ĆŸĂĄdnĂĄ dƙívějĆĄĂ­ "
-"data\n"
-"ani oddĂ­ly a to i pro Windows.\n"
-"\n"
-"Klepnutím na \"<- Zpět\" zruơíte tuto operaci bez ztráty dat a oddílƯ na "
-"disku."
+msgid "Printer name, description, location"
+msgstr "Název tiskárny, popis, umístění"
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Vyberte disk, kterĂœ chcete smazat pro instalaci Mandrake Linux.\n"
-"Pamatujte na to, ĆŸe vĆĄechna data budou ztracena a nelze je jiĆŸ obnovit!"
+msgid "USA (broadcast)"
+msgstr "USA (broadcast)"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
+"Please choose the\n"
+"media for backup."
msgstr ""
-"\"Zvuková karta\": pokud je detekována v počítači zvuková karta, je zde\n"
-"zobrazena. Pokud ale vidĂ­te, ĆŸe zobrazenĂĄ karta nenĂ­ pƙesně tak, kterou\n"
-"mĂĄte v počítači, mĆŻĆŸete klepnutĂ­m na tlačítko vybrat jinou kartu a ovladač."
+"ProsĂ­m zvolte si\n"
+"médium pro zålohy."
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
-msgstr ""
-"\"Zvuková karta\": pokud je detekována v počítači zvuková karta, je zde\n"
-"zobrazena. Pokud ale vidĂ­te, ĆŸe zobrazenĂĄ karta nenĂ­ pƙesně tak, kterou\n"
-"mĂĄte v počítači, mĆŻĆŸete klepnutĂ­m na tlačítko vybrat jinou kartu a ovladač."
+msgid "Use Xinerama extension"
+msgstr "PouĆŸĂ­t rozơíƙenĂ­ Xinerama"
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot je zavaděč pro počítače Macintosh. UmoĆŸĆˆuje spouĆĄtět jak GNU/Linux, "
-"MacOS tak i MacOSX, pokud jsou na počítači nainstalovány. Ve větơině\n"
-"pƙípadĆŻ jsou tyto operačnĂ­ systĂ©my sprĂĄvně detekovĂĄny. Pokud nejsou, mĆŻĆŸete\n"
-"zde na tĂ©to obrazovce pƙidat zĂĄznamy ručně. Dejte si ale pozor na sprĂĄvnou\n"
-"volbu parametrĆŻ.\n"
-"\n"
-"Yaboot mĂĄ tyto hlavnĂ­ volby:\n"
-"\n"
-" * Úvodní hláơka: jednoduchá textová zpráva, která je zobrazena pƙed "
-"vĂœzvou.\n"
-"\n"
-" * SpouĆĄtěcĂ­ zaƙízenĂ­: udĂĄvĂĄ mĂ­sto, kde jsou informace potƙebnĂ© pro "
-"spuơtění\n"
-"GNU/Linuxu. Obyčejně je to bootstrap oddĂ­l, kterĂœ byl vytvoƙen jiĆŸ pƙedtĂ­m.\n"
-"\n"
-" * Prodleva pro Firmware: na rozdíl od zavaděče LILO jsou zde dvě prodlevy.\n"
-"PrvnĂ­ prodleva v sekundĂĄch umoĆŸĆˆuje zvolit mezi spuĆĄtěnĂ­m CD, OF boot,\n"
-"MacOS nebo Linuxu.\n"
-"\n"
-" * Prodleva pro jádro: tato prodleva je podobná prodlevě pro LILO.\n"
-"UdĂĄvĂĄ v nĂĄsobcĂ­ch 0,1 vteƙiny jak dlouho se čekĂĄ, neĆŸ se zavede \n"
-"vĂœchozĂ­ jĂĄdro.\n"
-"\n"
-" * Povolit spuĆĄtěnĂ­ z CD?: tato volba dovoluje pouĆŸĂ­t \"C\" pro spuĆĄtěnĂ­ "
-"CD.\n"
-"\n"
-" * Povolit OF Boot?: tato volba dovoluje pouĆŸĂ­t \"N\" pro spuĆĄtěnĂ­ Open "
-"Firm.\n"
-"\n"
-" * VĂœchozĂ­ OS: vyberte vĂœchozĂ­ OS, kterĂœ se spustĂ­ po uplynutĂ­ prodlevy."
+msgid "Loopback"
+msgstr "Loopback"
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
msgstr ""
-"Pro Yaboot, pro dalĆĄĂ­ operačnĂ­ systĂ©my, pro alternativnĂ­ jĂĄdra nebo pro\n"
-"zĂĄchrannĂœ disk lze zde zadat dalĆĄĂ­ parametry.\n"
-"\n"
-"Pro jinĂ© OS je moĆŸnĂ© zadat pouze nĂĄzev a hlavnĂ­ oddĂ­l.\n"
-"\n"
-"Pro Linux je několik dalĆĄĂ­ch moĆŸnostĂ­:\n"
-"\n"
-" * Jmenovka: je to jednoduchĂœ nĂĄzev, kterĂ© mĆŻĆŸete napsat do pƙíkazovĂ©ho\n"
-"ƙádku pro Yaboot pro zvolenĂ­ danĂ©ho systĂ©mu.\n"
-"\n"
-" * Obraz: je to jméno jådra, ze kterého se spustí systém. Typicky je to "
-"vmlinux\n"
-"či obdoba slova vmlinux s pƙíponami.\n"
-"\n"
-" * Root: koƙenovĂ© zaƙízenĂ­ \"/\" pƙi instalaci Linuxu.\n"
-"\n"
-" * Pƙidat volby: na počítačích Apple potƙebuje jádro dalơí parametry, aby "
-"se\n"
-"správně nastavil hardware pro video, či provedla emulace tlačítek myơi\n"
-"na klĂĄvesnici, protoĆŸe myĆĄ u počítače Apple nemĂĄ druhĂ© a tƙetĂ­ tlačítko.\n"
-"Zde jsou nějakĂ© pƙíklady:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: tato volba je určena moduly, kterĂ© se musĂ­ nahrĂĄt do paměti "
-"jeơtě\n"
-"dƙíve, neĆŸ je pƙístupnĂœ spouĆĄtěcĂ­ oddĂ­l, či v pƙípadě opravy systĂ©mu.\n"
-"\n"
-" * Velikost initrd: vĂœchozĂ­ velikost ramdisku je 4,096 bytĆŻ. Pokud "
-"potƙebujete\n"
-"větơí velikost, zadejte sem potƙebnou hodnotu.\n"
-"\n"
-" * Read-write: bÄ›ĆŸně je \"root\" oddĂ­l pƙipojen nejdƙíve v reĆŸimu pouze pro\n"
-"čtenĂ­, aby se provedlo otestovĂĄnĂ­ systĂ©mu pƙed tĂ­m, neĆŸ se pouĆŸije pro běh.\n"
-"Zde je moĆŸnĂ© toto chovĂĄnĂ­ změnit.\n"
-"\n"
-" * Bez grafiky: grafickĂ© zaƙízenĂ­ na počítačích Apple je někdy "
-"problematické\n"
-"a tak je moĆŸnĂ© zadat tuto volbu a zvolit nativnĂ­ podporu.\n"
-"\n"
-" * VĂœchozĂ­: zvolĂ­ tuto poloĆŸku jako vĂœchozĂ­ pro vĂœběr z nabĂ­dky, kdy stačí\n"
-"pouze stisknout ENTER a spustĂ­ se. Tato poloĆŸka je označena \"*\" a vĆĄechny\n"
-"vĂœběry se zobrazĂ­ po stisknutĂ­ tlačítka [Tab]."
+"Nelze korektně ukončit mkbootdisk: \n"
+" %s \n"
+" %s"
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"Aplikace DrakX se nejdƙíve pokusĂ­ najĂ­t vĆĄechny pevnĂ© disky v počítači.\n"
-"TakĂ© se pokusĂ­ nalĂ©zt jeden nebo vĂ­ce PCI SCSI adaptĂ©rĆŻ. Pokud nějakĂœ "
-"najde,\n"
-"automaticky nainstaluje sprĂĄvnĂœ ovladač.\n"
-"\n"
-"ProtoĆŸe automatickĂĄ detekce hardware nemusĂ­ vĆŸdy nalĂ©zt vĆĄechny typy "
-"hardware,\n"
-"budete v dialogu dotĂĄzĂĄni, zda vĆŻbec mĂĄte nějakĂœ SCSI adaptĂ©r. \n"
-"Pokud si budete muset vybrat ovladač ručně, aplikace DrakX se zeptá,\n"
-"zda pro něj chcete zadat nějakĂ© volby Měli byste povolit aplikaci DrakX,\n"
-"aĆ„ se pokusĂ­ zjistit, kterĂ© volby jsou pro danou kartu potƙeba. VětĆĄinou to\n"
-"funguje dobƙe.\n"
-"\n"
-"Pokud to nebude fungovat, budete muset zadat dalơí informace pro ovladač "
-"ručně."
+msgid "West Europe"
+msgstr "ZĂĄpadnĂ­ Evropa"
-#: ../../help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
msgstr ""
-"Zde si mĆŻĆŸete vybrat tiskovĂœ systĂ©m, kterĂœ budete pouĆŸĂ­vat. JinĂ© OS "
-"nabĂ­zejĂ­\n"
-"jeden, Mandrake nabĂ­zĂ­ dva. KaĆŸdĂœ z nich je nejvhodnějĆĄĂ­ pro rĆŻznĂ© typy\n"
-"konfiguracĂ­.\n"
-"\n"
-" * \"pdq\" - coĆŸ znamenĂĄ 'print, don't queue' a je vhodnĂœ tehdy, pokud "
-"nemĂĄte\n"
-"ĆŸĂĄdnĂ© sĂ­Ć„ovĂ© tiskĂĄrny. ZvlĂĄdĂĄ pouze několik moĆŸnostĂ­ a tisk na něj ze sĂ­tě\n"
-"je velmi pomalĂœ. Pokud s GNU/Linuxem teprve začínĂĄte, pak je \"pdq\"\n"
-"doporučenĂœ tiskovĂœ systĂ©m pro vĂĄs.\n"
-"\n"
-" * \"CUPS\"'Common Unix Printing System' je vynikajĂ­cĂ­ v tisku na lokĂĄlnĂ­\n"
-"tiskĂĄrny stejně jako pƙi tisku na tiskĂĄrnu na druhĂ© straně planety. "
-"NastavenĂ­\n"
-"je jednoduchĂ© a mĆŻĆŸe fungovat jako klient i server pro klienty z \"lpd\"\n"
-"systĂ©mu, takĆŸe je s nimi kompatibilnĂ­. Je moĆŸnĂ© nastavit spoustu voleb,\n"
-"ale zĂĄkladnĂ­ nastavenĂ­ je velmi jednoduchĂ©. Pokud potƙebujete emulovat\n"
-"\"lpd\" server, stačí spustit dĂ©mona \"cups-lpd\". MĂĄ takĂ© grafickĂ© "
-"prostƙedí\n"
-"pro tisk a nastavenĂ­ tiskĂĄrny.\n"
+"[VOLBY] [NAZEV_PROGRAMU]\n"
"\n"
-"Pokud nynĂ­ provedete volbu a později budete chtĂ­t tiskovĂœ systĂ©m změnit,\n"
-"mĆŻĆŸete to provĂ©st pomocĂ­ nĂĄstroje PrinterDrake z ovlĂĄdacĂ­ho centra Mandrake "
-"tak,\n"
-"ĆŸe klepnete na tlačítko Expert."
+"[VOLBY]:\n"
+" --help - vypíơe tuto nápovědu.\n"
+" --report - program mĆŻĆŸe bĂœt libovolnĂœ mandrake nĂĄstroj\n"
+" --incident - program mĆŻĆŸe bĂœt libovolnĂœ mandrake nĂĄstroj"
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
-msgstr ""
-"LILO a Grub jsou zavaděče systĂ©mu. Tato část je bÄ›ĆŸně plně automatickĂĄ.\n"
-"DrakX analyzuje zaváděcí sektor disku a zachová se podle toho, co zde\n"
-"nalezne:\n"
-"\n"
-" * pokud nalezne zaváděcí sektor Windows, pƙepíơe ho sektorem pro LILO/Grub\n"
-"tak, aby bylo moĆŸnĂ© spouĆĄtět jak systĂ©m Windows tak i Linux;\n"
-"\n"
-" * pokud nalezne zavĂĄděcĂ­ sektor pro LILO nebo Grub, tak jej pƙepĂ­ĆĄe novĂœm.\n"
-"\n"
-"Pokud instalačnĂ­ program nedokĂĄĆŸe rozhodnout, zeptĂĄ se na to, kam mĂĄ "
-"zavaděč\n"
-"umĂ­stit.\n"
-"\n"
-"\"SpouĆĄtěcĂ­ zaƙízenĂ­\": ve větĆĄině pƙípadĆŻ nenĂ­ nutnĂ© měnit vĂœchozĂ­\n"
-"nastavení (\"První sektor disku (MBR)\"), ale zavaděč lze nainstalovat na \n"
-"druhĂœ disk (\"/dev/hdb\") nebo dokonce na disketu (\"Na disketu\")."
+msgid "Harddrake2 version %s"
+msgstr "Harddrake2 verze %s"
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-"Po nastavenĂ­ obecnĂœch parametrĆŻ zavaděče systĂ©mu bude k dispozici\n"
-"seznam voleb pro zavĂĄděnĂ­, kterĂœ se zobrazĂ­ pƙi zavĂĄděnĂ­ systĂ©mu.\n"
-"\n"
-"Pokud jiĆŸ mĂĄte na počítači jinĂœ operačnĂ­ systĂ©m, automaticky bude zaƙazen "
-"do\n"
-"nabĂ­dky pro spouĆĄtěnĂ­. Zde je moĆŸnĂ© dĂĄle doladit volby, kterĂ© se pƙedĂĄvajĂ­ "
-"tĂ­m,\n"
-"ĆŸe na danou nabĂ­dkou vyberete a klepnete na tlačítko \"Upravit\", pokud jej "
-"chcete\n"
-"upravit, \"Odstranit\" pouĆŸijte pro odebrĂĄnĂ­ a \"Pƙidat\" pouĆŸijte pokud "
-"chcete\n"
-"vytvoƙit novou poloĆŸku.\n"
-"K dalơímu kroku se dostanete klepnutím na tlačítko \"Hotovo\".\n"
-"\n"
-"Pokud nechcete umoĆŸnit pƙístup k těmto operačnĂ­m systĂ©mĆŻm komukoliv, mĆŻĆŸete\n"
-"je z nabĂ­dky odstranit smazĂĄnĂ­m odpovĂ­dajĂ­cĂ­ch poloĆŸek.. V tom pƙípadě ale\n"
-"musĂ­te mĂ­t spouĆĄtěcĂ­ disketu, ze kterĂ© je moĆŸnĂ© tento operačnĂ­ systĂ©m "
-"spustit!"
+msgid "Copying %s"
+msgstr "KopĂ­ruji %s"
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
-msgstr ""
-"Pokud jsou nějakĂ© pochybnosti, je zobrazen dialog s vĂœběrem moĆŸnostĂ­.\n"
-"\n"
-" * \"JakĂœ spouĆĄtěč pouĆŸĂ­t:\" je moĆŸnĂ© si vybrat ze tƙí moĆŸnostĂ­:\n"
-"\n"
-" * \"GRUB\": pokud preferujete zavaděč Grub (textová nabídka).\n"
-"\n"
-" * \"LILO s grafickou nabĂ­dkou\": pokud preferujete LILO s grafickĂœm\n"
-"rozhranĂ­m.\n"
-"\n"
-" * \"LILO s textovou nabídkou\": pokud preferujete textové rozhraní.\n"
-"\n"
-" * \"SpouĆĄtěcĂ­ zaƙízenĂ­\": ve větĆĄině pƙípadĆŻ nenĂ­ nutnĂ© měnit vĂœchozĂ­\n"
-"nastavenĂ­ (\"/dev/hda\"), ale lze nainstalovat zavaděč na druhĂœ disk\n"
-"(\"/dev/hdb\") nebo dokonce na disketu (\"/dev/fd0\").\n"
-"\n"
-" * \"Prodleva pƙes spuơtěním\": pokud zapnete počítač, je v tomto čase\n"
-"umoĆŸněno uĆŸivateli vybrat si jinĂœ systĂ©m z nabĂ­dky pƙed tĂ­m, neĆŸ bude\n"
-"zaveden vĂœchozĂ­ systĂ©m.\n"
-"\n"
-"!! Vyvarujte se pokusƯ nenainstalovat zavaděč (vybráním volby \"Pƙeskočit"
-"\"),\n"
-"protoĆŸe by měl existovat zpĆŻsob, jak zavĂ©st systĂ©m Mandrake Linux!\n"
-"TakĂ© si dobƙe rozmyslete, jakĂ© změny zde provĂĄdĂ­te !!\n"
-"\n"
-"KlepnutĂ­m na tlačítko \"RozơíƙenĂ©\" se dialog rozơíƙí o dalĆĄĂ­ moĆŸnosti,\n"
-"vyhrazenĂ© pro znalĂ© uĆŸivatele."
+msgid "Choose color"
+msgstr "vĂœběr barvy"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
-msgstr ""
-"NĂĄsledujĂ­cĂ­ rozhodnutĂ­ je jednĂ­m z těch, kterĂ© ovlivƈujĂ­ celkovou "
-"bezpečnost\n"
-"systĂ©mu GNU/Linux, tj. volba hesla pro uĆŸivatele \"Root\". Root je sprĂĄvcem\n"
-"systĂ©mu, je odpovědnĂœ za provĂĄděnĂ­ aktualizacĂ­, pƙidĂĄvĂĄnĂ­ uĆŸivatelĆŻ a takĂ©\n"
-"za celkovĂ© nastavenĂ­ systĂ©mu. ZkrĂĄceně: \"root\" mĆŻĆŸe Ășplně vĆĄechno!\n"
-"To je takĂ© dĆŻvodem, proč se heslo volĂ­ takovĂ©, aby se nedalo lehce uhodnout\n"
-"a instalačnĂ­ program DrakX zkontroluje, zda nenĂ­ pƙíliĆĄ jednoduchĂ©. Jak "
-"vidĂ­te,\n"
-"je moĆŸnĂ© heslo nezadat, ale toto velmi dĆŻrazně nedoporučujeme, a to z "
-"jednoho\n"
-"dĆŻvodu. Nemyslete si, ĆŸe pokud spustĂ­te systĂ©m GNU/Linux, ĆŸe je vĆĄe bezpečnĂ© "
-"a ĆŸe se nemĆŻĆŸe nic stĂĄt.. Vzhledem k tomu, ĆŸe na uĆŸivatele \"root\" se "
-"nevztahujĂ­\n"
-"bÄ›ĆŸnĂĄ omezenĂ­, mĆŻĆŸe nenĂĄvratně poĆĄkodit celĂœ systĂ©m, smazat data z jinĂœch\n"
-"oddĂ­lĆŻ na disku a operačnĂ­ch systĂ©mĆŻ, vymazat potƙebnĂ© soubory nebo celĂ©\n"
-"oddĂ­ly, atd. Proto je dĆŻleĆŸitĂ©, aby nebylo jednoduchĂ© se tĂ­mto uĆŸivatelem "
-"stĂĄt.\n"
-"\n"
-"ZvolenĂ© heslo by se mělo sklĂĄdat ze znakĆŻ a číslic a mělo by bĂœt dlouhĂ©\n"
-"minimĂĄlně 8 znakĆŻ. TakĂ© nenĂ­ dobrĂ© si ho kamkoliv poznamenĂĄvat - po\n"
-"nalezenĂ­ vaĆĄĂ­ poznĂĄmky mĆŻĆŸe bĂœt velmi jednoduchĂ© se do vaĆĄeho systĂ©mu\n"
-"dostat.\n"
-"\n"
-"Nevolte vĆĄak heslo pƙíliĆĄ dlouhĂ© nebo komplikovanĂ©, bude nutnĂ© si jej bez\n"
-"větĆĄĂ­ch potĂ­ĆŸĂ­ zapamatovat.\n"
-"\n"
-"Pƙi zadávání nebude heslo na obrazovce zobrazeno. Proto se heslo zadává\n"
-"dvakrĂĄt pro ověƙenĂ­, zda nedoĆĄlo k pƙeklepu pƙi prvnĂ­m pokusu. Tak je moĆŸnĂ©\n"
-"heslo opravit a zadat dvakrĂĄt stejnĂ©. Pokud se vĂĄm pƙesto podaƙí zadat "
-"stejnĂœ\n"
-"pƙeklep dvakrĂĄt, budete muset toto heslo s pƙeklepem pouĆŸĂ­t pƙi prvnĂ­m\n"
-"pƙihláơení.\n"
-"\n"
-"JestliĆŸe chcete pouĆŸĂ­t ověƙovacĂ­ server, klepněte na tlačítko \"RozơíƙenĂ©"
-"\".\n"
-"\n"
-"Pokud se ve vaĆĄĂ­ sĂ­ti pouĆŸĂ­vĂĄ pro ověƙovĂĄnĂ­ uĆŸivatelĆŻ protokol LDAP, NIS,\n"
-"nebo ověƙovacĂ­ domĂ©na Windows PDC, vyberte odpovĂ­dajĂ­cĂ­ protokol. Pokud\n"
-"o tom nic nevíte, zeptejte se správce vaơí sítě.\n"
-"\n"
-"Pokud nenĂ­ počítač pƙipojen do ĆŸĂĄdnĂ© spravovanĂ© sĂ­tě a věƙíte vĆĄem, kteƙí "
-"majĂ­\n"
-"pƙístup k počítači, mĆŻĆŸete vybrat volbu \"Bez hesla\".moĆŸnost \"LokĂĄlnĂ­ "
-"soubory\"."
+msgid "Dominican Republic"
+msgstr "DominikĂĄnskĂĄ republika"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Vyberte prosĂ­m sprĂĄvnĂœ port. Napƙíklad \"COM1\" pod MS Windows se\n"
-"v Linuxu jmenuje \"ttyS0\"."
+msgid "Swaziland"
+msgstr "Svazijsko"
-#: ../../help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
-msgstr ""
-"Aplikace DrakX obvykle zjistí počet tlačítek na vaơí myơi. Pokud ne, "
-"pƙedpokládá,\n"
-"ĆŸe mĂĄte dvoutlačítkovou myĆĄ a nastavĂ­ emulaci pro tƙetĂ­ tlačítko myĆĄi. "
-"Aplikace\n"
-"také umí rozpoznat, zda se jednå o myƥ PS/2, USB nebo sériovou.\n"
-"\n"
-"Pokud chcete zadat jinĂœ typ myĆĄi, vyberte odpovĂ­dajĂ­cĂ­ typ se seznamu.\n"
-"\n"
-"Pokud vyberete jinou myĆĄ neĆŸ ta, kterĂĄ byla detekovĂĄna, zobrazĂ­ se "
-"testovacĂ­\n"
-"obrazovka. Zde otestujte jak tlačítka tak i kolečko a ověƙte, zda je "
-"nastavenĂ­\n"
-"sprĂĄvnĂ©. Pokud myĆĄ nepracuje sprĂĄvně, stiskněte mezernĂ­k nebo klĂĄvesu Enter\n"
-"na \"ZruĆĄit\"\n"
-" a vyberte jinĂœ typ.\n"
-"\n"
-"MyĆĄi s kolečkem nejsou v některĂœch pƙípadech automaticky rozpoznĂĄny. Budete\n"
-"je muset vybrat ze seznamu. Ujistěte se, ĆŸe vyberete myĆĄ s odpovĂ­dajĂ­cĂ­m "
-"typem\n"
-"portu, ke kterĂ©mu je pƙipojenĂĄ. PotĂ©, co stisknete tlačítko \"DĂĄle ->\", \n"
-"zobrazí se obrázek s myơí. Aby se správně kolečko aktivovalo, musíte "
-"pohybovat\n"
-"kolečkem vaơí myơi.\n"
-"PotĂ© ověƙte, zda-li je sprĂĄvnĂ© nastavenĂ­ tlačítek a pohybu vaĆĄĂ­ myĆĄi."
+msgid "Set-UID"
+msgstr "Set-UID"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
-msgstr ""
-"VĂœběr preferovanĂ©ho jazyka ovlivƈuje dokumentaci, jazyk instalačnĂ­ho "
-"programu\n"
-"a vĆĄech programĆŻ obecně. V prvnĂ­m kroku si vyberete region kde ĆŸijete\n"
-"a potom jazyk kterĂœm mluvĂ­te.\n"
-"\n"
-"Tlačítko \"RozơíƙenĂ©\" umoĆŸĆˆuje zvolit dalĆĄĂ­ jazyky, kterĂ© budou takĂ©\n"
-"nainstalovĂĄny a mĆŻĆŸete je pouĆŸĂ­t v systĂ©mu. VĂœběrem dalĆĄĂ­ch jazykĆŻ "
-"nainstalujete\n"
-"soubory s aplikacemi a dokumentací specifické pro tyto jazyky. Pokud "
-"napƙíklad\n"
-"na počítači pracujĂ­ občas lidĂ© ze Ć panělska, vyberte angličtinu jako hlavnĂ­\n"
-"jazyka pod tlačítkem rozơíƙenĂ© zatrhněte volbu \"Ć panělĆĄtina|Ć panělsko\".\n"
-"\n"
-"Pƙi vĂœběru jazyka nejste omezeni pouze na jedinĂœ dalĆĄĂ­. MĆŻĆŸete si jich "
-"vybrat\n"
-"vĂ­ce nebo dokonce nainstalovat vĆĄechny vybrĂĄnĂ­m volby \"VĆĄechny jazyky\".\n"
-"PƙídavnĂĄ volba \"PouĆŸĂ­t Unicode jako vĂœchozĂ­\" nastavuje celĂœ systĂ©m na\n"
-"pouĆŸĂ­vĂĄnĂ­ Unicode (UTF-8). ZatĂ­m je to ale experimentĂĄlnĂ­ volba. Pokud\n"
-"vyberete rĆŻznĂ© jazyky, kterĂ© vyĆŸadujĂ­ jinĂĄ kĂłdovĂĄnĂ­, bude i pƙesto podpora\n"
-"pro Unicode nainstalovĂĄna.\n"
-"\n"
-"Změnu rĆŻznĂœch jazykĆŻ instalovanĂœch v systĂ©mu lze provĂ©st pomocĂ­ pƙíkazu\n"
-"\"/usr/bin/localedrake\" spuĆĄtěnĂ©ho jako uĆŸivatel \"root\". SpuĆĄtěnĂ­ pod\n"
-"bÄ›ĆŸnĂœm uĆŸivatelem zpĆŻsobĂ­ změnu nastavenĂ­ pouze pro danĂ©ho uĆŸivatele.Lze "
-"takto doinstalovat více jazykƯ. Pokud máte jazyky vybrány, klikněte na \"OK"
-"\"\n"
-"a instalace bude pokračovat dalơím krokem."
+msgid "Please check if you are using CDRW media"
+msgstr "Zvolte pokud pouĆŸĂ­vĂĄte CDRW mĂ©dia"
#: ../../help.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
msgstr ""
-"NormĂĄlně zvolĂ­ instalačnĂ­ program sprĂĄvnou klĂĄvesnici na zĂĄkladě zvolenĂ©ho\n"
-"jazyka, takĆŸe nenĂ­ potƙeba nic v tomto kroku měnit. \n"
-"MĆŻĆŸe se ale stĂĄt, ĆŸe nemĂĄte klĂĄvesnici, kterĂĄ odpovĂ­dĂĄ vaĆĄemu jazyku: "
-"napƙíklad\n"
-"pokud jste anglicky hovoƙícĂ­ Ć vĂœcar, stejně chcete mĂ­t ĆĄvĂœcarskou "
-"klĂĄvesnici.\n"
-"Nebo pokud mluvĂ­te anglicky, ale ĆŸijete v Quebecu, je to stejnĂœ pƙípad. V "
-"obou\n"
-"pƙípadech se mĆŻĆŸete vrĂĄtit na tento instalačnĂ­ krok a vybrat si "
-"odpovĂ­dajĂ­cĂ­\n"
-"klĂĄvesnici ze seznamu.\n"
-"\n"
-"Pokud mĂĄte klĂĄvesnici pro jinĂœ jazyk, klepněte na tlačítko \"VĂ­ce\"\n"
-"a zobrazĂ­ se kompletnĂ­ seznam vĆĄech podporovanĂœch rozloĆŸenĂ­ klĂĄvesnic.\n"
-"\n"
-"Pokud vyberete rozloĆŸenĂ­ klĂĄvesnice zaloĆŸenĂ© na abecedě jinĂ© neĆŸ latince,\n"
-"budete v dalĆĄĂ­m dialogu vyzvĂĄni k vĂœběru klĂĄvesovĂ© zkratky, kterĂĄ bude "
-"pƙepínat\n"
-"rozloĆŸenĂ­ klĂĄvesnice mezi latinkou a vĂĄmi zvolenĂœm rozloĆŸenĂ­m."
+"Vyberte disk, kterĂœ chcete smazat pro instalaci Mandrake Linux.\n"
+"Pamatujte na to, ĆŸe vĆĄechna data budou ztracena a nelze je jiĆŸ obnovit!"
-#: ../../help.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
-"Tento krok je objeví pouze tehdy, pokud je na vaơem počítači nalezen starơí\n"
-"oddĂ­l GNU/Linuxu.\n"
-"\n"
-"InstalačnĂ­ program potƙebuje vědět, zda mĂĄ provĂ©st instalaci nebo pouze\n"
-"aktualizaci existujícího systému Mandrake Linux.\n"
-"\n"
-" * \"Instalace\": NejbÄ›ĆŸnějĆĄĂ­ volba, provede kompletnĂ­ vĂœmaz starĂ©ho "
-"systému.\n"
-"Pokud si pƙejete změnit rozmĂ­stěnĂ­ oddĂ­lĆŻ, změnit souborovĂœ systĂ©m, "
-"pouĆŸijte\n"
-"tuto volbu. MĆŻĆŸete samozƙejmě takĂ© některĂ© oddĂ­ly zachovat pƙed pƙepsĂĄnĂ­m.\n"
-"\n"
-" * \"Aktualizace\": tato volba provede aktualizaci instalovanĂœch balíčkĆŻ.\n"
-"AktuĂĄlnĂ­ rozmĂ­stěnĂ­ diskovĂœch oddĂ­lĆŻ a uĆŸivatelskĂĄ data zĆŻstanou zachovĂĄna.\n"
-"Bude provedena ale větơina konfiguračních krokƯ, stejně jako pƙi instalaci.\n"
-"\n"
-"PouĆŸitĂ­ volby \"Aktualizace\" bude fungovat bez problĂ©mĆŻ na stĂĄvajĂ­cĂ­ "
-"verzi \n"
-"\"8.1\" a novějĆĄĂ­. Aktualizace na verzĂ­ch starĆĄĂ­ch neĆŸ \"8.1\" nenĂ­ "
-"doporučováno."
+msgid " on parallel port \\#%s"
+msgstr " na paralelnĂ­m portu \\#%s"
-#: ../../help.pm:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
-"\"Země\": zkontrolujte aktuĂĄlnĂ­ vĂœběr země. Pokud nejste v danĂ© zemi, "
-"klepněte\n"
-"na tlačítko \"Nastavit\" a vyberte si jinou. Pokud vaơe země na prvním "
-"seznamu,\n"
-"klepněte na tlačítko \"Více\" a získáte kompletní seznam zemí."
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "Pro vyber polozek pouzijte klavesy %c a %c."
-#: ../../help.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"InstalačnĂ­ program nalezl na disku vĂ­ce neĆŸ jeden oddĂ­l s Microsoft "
-"Windows.\n"
-"ProsĂ­m vyberte si jeden z nich, kterĂœ je potƙeba zmenĆĄit pro novu instalaci\n"
-"systému Mandrake Linux.\n"
-"\n"
-"KaĆŸdĂœ oddĂ­l je zobrazen nĂĄsledovně: \"JmĂ©no pro Linux\",\n"
-"\"Jméno pro Windows\", \"Velikost\".\n"
-"\n"
-"\"JmĂ©no pro Linux\" je sloĆŸeno nĂĄsledovně: \"typ pevnĂ©ho disku\",\n"
-"\"číslo disku\", \"číslo oddílu\". (napƙíklad \"hda1\").\n"
-"\n"
-"Pokud måte IDE disky, pak je \"typ pevného disku\" \"hd\", pokud måte SCSI,\n"
-"označení bude \"sd\".\n"
-"\n"
-"\"Číslo disku\" je vĆŸdy pĂ­smeno za \"hd\" nebo \"sd\". Pro IDE disky je "
-"takto:\n"
-"\n"
-" * \"a\" znamená \"master disk na primárním IDE ƙadiči\",\n"
-"\n"
-" * \"b\" znamená \"slave disk na primárním IDE ƙadiči\",\n"
-"\n"
-" * \"c\" znamená \"master disk na sekundárním IDE ƙadiči\",\n"
-"\n"
-" * \"d\" znamená \"slave disk na sekundárním IDE ƙadiči\".\n"
-"\n"
-"Pro SCSI disky platĂ­, ĆŸe \"a\" je \"nejmenĆĄĂ­ SCSI ID\", \"b\" je \"druhĂ©\n"
-"nejmenĆĄĂ­ SCSI ID\" atd.\n"
-"\n"
-"\"JmĂ©no pro Windows\" je pĂ­smeno, kterĂ© je pouĆŸito ve Windows\n"
-"(prvnĂ­ oddĂ­l nebo disk mĂĄ pĂ­smeno \"C:\")."
+msgid "Generic 2 Button Mouse"
+msgstr "Standardní dvoutlačítková myơ"
-#: ../../help.pm:1
+#: ../../lvm.pm:1
#, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"V tĂ©to chvĂ­li je potƙeba určit, kterĂœ(Ă©) oddĂ­l(y) budou pouĆŸity pro "
-"instalaci\n"
-"systĂ©mu Mandrake Linux. Pokud byly oddĂ­ly jiĆŸ jednou definovĂĄny, buď\n"
-"z pƙedchozĂ­ instalace GNU/Linux nebo jinĂœm programem na rozdělenĂ­ disku,\n"
-"je moĆŸnĂ© pouĆŸĂ­t prĂĄvě tyto oddĂ­ly. Jinak musĂ­ bĂœt oddĂ­ly nově definovĂĄny.\n"
-"\n"
-"Pro vytvoƙenĂ­ oddĂ­lu musĂ­te nejdƙíve vybrat pevnĂœ disk. Klepněte na \n"
-"\"hda\", coĆŸ je prvnĂ­ IDE disk, nebo na \"hdb\", coĆŸ je druhĂœ disk,\n"
-"pƙípadně na \"sda\", coĆŸ je prvnĂ­ SCSI disk.\n"
-"\n"
-"Pro rozdělenĂ­ vybranĂ©ho disku mĆŻĆŸete pouĆŸĂ­t tyto volby:\n"
-"\n"
-" * \"VĆĄe smazat\": tato volba smaĆŸe vĆĄechny oddĂ­ly na disku.\n"
-"\n"
-" * \"Automaticky rozmĂ­stit\": dojde k automatickĂ©mu vytvoƙenĂ­ oddĂ­lu pro\n"
-"Ext2 a swap ve volném prostoru disku.\n"
-"\n"
-" * \"VĂ­ce\": nabĂ­dne dalĆĄĂ­ moĆŸnosti:\n"
-"\n"
-" * \"UloĆŸit tabulku oddĂ­lĆŻ\": uloĆŸĂ­ tabulku oddĂ­lĆŻ na disketu. To je\n"
-"vhodnĂ© pro pƙípad poĆĄkozenĂ­ tabulky, kdy ji lze z tĂ©to zĂĄlohy obnovit.\n"
-"Doporučujeme vyuĆŸĂ­t tuto moĆŸnost.\n"
-"\n"
-" * \"Obnovit tabulku oddĂ­lĆŻ\": obnovĂ­ tabulku oddĂ­lĆŻ, kterĂĄ byla jiĆŸ "
-"dƙíve\n"
-"uloĆŸena na disketu.\n"
-"\n"
-" * \"ZĂĄchrana tabulky oddĂ­lĆŻ\": pokud je tabulka poĆĄkozena, mĆŻĆŸete se\n"
-"pokusit ji opravit. Buďte ale opatrnĂ­ a pamatujte na to, ĆŸe se to nemusĂ­ "
-"vĆŸdy\n"
-"podaƙit.\n"
-"\n"
-" * \"Znovu načíst tabulku oddílƯ\": zruơí vơechny změny a nahraje pƯvodní\n"
-"tabulku oddĂ­lĆŻ.\n"
-"\n"
-" \"AutomatickĂ© pƙipojovĂĄnĂ­ pro vyjĂ­matelnĂĄ mĂ©dia\": odznačenĂ­ tĂ©to volby\n"
-"zpĆŻsobĂ­, ĆŸe pƙi pƙipojovĂĄnĂ­ a odpojovĂĄnĂ­ vyjĂ­matelnĂœch mĂ©diĂ­ jako jsou CD-"
-"ROM\n"
-"disky a floppy disky je nutnĂ© pouĆŸĂ­t ručně pƙíkaz mount.\n"
-"\n"
-" * \"PrĆŻvodce\": pokud nemĂĄte dobrĂ© znalosti o rozdělovĂĄnĂ­ diskĆŻ, pouĆŸijte\n"
-"tuto volbu, kdy se spustĂ­ prĆŻvodce. Doporučujeme, pokud nemĂĄte dobrĂ© "
-"znalosti\n"
-"o vytváƙení oddílƯ na disku.\n"
-"\n"
-" * \"Odvolat\": zruĆĄĂ­ vĆĄechny provedenĂ© změny.\n"
-"\n"
-" * \"Pƙepnout normĂĄlnĂ­/expertnĂ­ reĆŸim\": dovoluje dalĆĄĂ­ akce s oddĂ­ly\n"
-"(typ oddĂ­lu, volby, formĂĄtovĂĄnĂ­) a zobrazĂ­ dalĆĄĂ­ informace.\n"
-"\n"
-" * \"Hotovo\": pokud mĂĄte disk rozdělen, uloĆŸĂ­ se změny na disk.\n"
-"\n"
-"Pokud definujete velikost oddĂ­lu, mĆŻĆŸete pƙesněji jejich velikost určit "
-"pomocĂ­\n"
-"kurzorovĂœch ĆĄipek na klĂĄvesnici.\n"
-"\n"
-"PoznĂĄmka: kaĆŸdou volbu je moĆŸnĂ© zadat takĂ© z klĂĄvesnice. Mezi oddĂ­ly se\n"
-"mĆŻĆŸete pohybovat pomocĂ­ klĂĄves [Tab] a [Ć ipka nahoru/ĆĄipka dolĆŻ].\n"
-"\n"
-"Pokud je vybrĂĄn oddĂ­l, lze pouĆŸĂ­t tyto volby:\n"
-"\n"
-" * Ctrl-c pro vytvoƙenĂ­ novĂ©ho oddĂ­lu (pokud je vybrĂĄn prĂĄzdnĂœ oddĂ­l);\n"
-"\n"
-" * Ctrl-d pro smazĂĄnĂ­ oddĂ­lu;\n"
-"\n"
-" * Ctrl-m pro zadání bodu pƙipojení.\n"
-"\n"
-"VĂ­ce informacĂ­ o jednotlivĂœch druzĂ­ch souborovĂœch systĂ©mĆŻ naleznete\n"
-"v kapitole o ext2fs v \"Referenční pƙíručce\".\n"
-"\n"
-"Pokud instalujete na počítač PPC, je potƙeba vytvoƙit malĂœ oddĂ­l HFS,\n"
-"tzv. \"bootstrap\" o minimĂĄlnĂ­ velikosti 1MB, kterĂœ bude pouĆŸit pro zavaděč\n"
-"Yaboot. Pokud vytvoƙíte tento oddĂ­l větĆĄĂ­, napƙ. 50 MB, je to dobrĂ© mĂ­sto "
-"pro\n"
-"uloĆŸenĂ­ ramdisku a jĂĄdra pro situace zĂĄchrany disku."
+msgid "Remove the logical volumes first\n"
+msgstr "Odeberte nejdƙíve logickĂ© disky\n"
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"NynĂ­ si vyberte Ășroveƈ zabezpečenĂ­ vaĆĄeho počítače Je zƙejmĂ©, ĆŸe čím vĂ­ce\n"
-"je počítač vyuĆŸĂ­vĂĄn a čím cennějĆĄĂ­ data obsahuje, tĂ­m je potƙeba zvolit "
-"vyĆĄĆĄĂ­\n"
-"Ășroveƈ. Na druhou stranu, vyĆĄĆĄĂ­ Ășroveƈ znesnadƈuje některĂ© obvyklĂ© postupy.\n"
-"\n"
-"Pokud nevĂ­te co vybrat, ponechte vĂœchozĂ­ nastavenĂ­."
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "Vybrana polozka bude automaticky spustena za %d sekund."
-#: ../../help.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
msgstr ""
-"PokaĆŸdĂ©, kdyĆŸ instalujete distribuci Mandrake Linux, je moĆŸnĂ©, ĆŸe některĂ©\n"
-"balíčky byly od vydĂĄnĂ­ distribuce aktualizovĂĄny. Mohly to bĂœt opravy chyb\n"
-"či ƙeĆĄenĂ­ moĆŸnĂœch bezpečnostnĂ­ch problĂ©mĆŻ. Pokud chcete vyuĆŸĂ­t prĂĄvě\n"
-"tĂ©to nabĂ­dky, je moĆŸnĂ© tyto balíčky nynĂ­ stĂĄhnout z Internetu. Zvolte \"Ano"
-"\"\n"
-"pokud máte funkční pƙipojení na Internet nebo \"Ne\", pokud budete\n"
-"instalovat aktualizace později.\n"
-"\n"
-"Po zvolenĂ­ \"Ano\" se zobrazĂ­ seznam mĂ­st, odkud mohou bĂœt aktualizace "
-"zĂ­skĂĄny.\n"
-"Vyberte si nejbliĆŸĆĄĂ­ mĂ­sto. NĂĄsledně se objevĂ­ stromovĂœ seznam balíčkĆŻ,\n"
-"kterĂœ je moĆŸno jeĆĄtě upravit a stisknutĂ­m tlačítka \"Instalovat\" se provede "
-"staĆŸenĂ­\n"
-"a instalace vybranĂœch balíčkĆŻ. Akci mĆŻĆŸete pƙeruĆĄit klepnutĂ­m na \"ZruĆĄit\"."
+"Nelze zapsat soubor /etc/sysconfig/bootsplash\n"
+"Soubor nebyl nalezen."
-#: ../../help.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet access"
+msgstr "Pƙístup na Internet"
+
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
+"y coordinate of text box\n"
+"in number of characters"
msgstr ""
-"KaĆŸdĂœ nově vytvoƙenĂœ diskovĂœ oddĂ­l musĂ­ bĂœt pƙed pouĆŸitĂ­m zformĂĄtovĂĄn\n"
-"(formĂĄtovĂĄnĂ­m se myslĂ­ vytvoƙenĂ­ souborovĂ©ho systĂ©mu).\n"
-"\n"
-"NynĂ­ lze formĂĄtovat jiĆŸ existujĂ­cĂ­ diskovĂ© oddĂ­ly pro vymazĂĄnĂ­\n"
-"vƥech dat, kterå obsahují. Pokud to chcete provést, vyberte diskové oddíly\n"
-"pro pƙeformátování.\n"
-"\n"
-"NenĂ­ ale nutnĂ© pƙeformĂĄtovat vĆĄechny jiĆŸ existujĂ­cĂ­ diskovĂ© oddĂ­ly.\n"
-"Je nutnĂ© pƙeformĂĄtovat oddĂ­ly, kterĂ© obsahujĂ­ operačnĂ­ systĂ©m (jako je \"/"
-"\",\n"
-"\"/usr\" nebo \"/var\") ale nenĂ­ nutnĂ© pƙeformĂĄtovat oddĂ­ly, kterĂ© obsahujĂ­\n"
-"data, kterĂĄ chcete zachovat (typicky /home).\n"
-"\n"
-"Pƙi vĂœběru diskovĂœch oddĂ­lĆŻ, kterĂ© se budou formĂĄtovat buďte opatrnĂ­, "
-"vĆĄechna\n"
-"data na formĂĄtovanĂœch oddĂ­lech budou ztracena a nelze je jiĆŸ obnovit.\n"
-"\n"
-"Pokud je vơe pƙipraveno pro formátování, klepněte na \"Dále ->\".\n"
-"\n"
-"Klepněte na \"Zpět\" pokud chcete vybrat jinĂ© oddĂ­ly pro instalaci\n"
-"systému Mandrake Linux.\n"
-"\n"
-"KlepnutĂ­m na \"RozơíƙenĂ©\" mĆŻĆŸete vybrat, kterĂ© oddĂ­ly budou otestovĂĄny\n"
-"na vadné bloky."
+"hodnota pro y souƙadnici\n"
+"pro textovĂœ box v počtu znakĆŻ"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
msgstr ""
-"NynĂ­ je instalace ukončena a operačnĂ­ systĂ©m GNU/Linux je pƙipraven k "
-"pouĆŸitĂ­.\n"
-"Klepněte na \"DĂĄle ->\" a systĂ©m bude restartovĂĄn. Potom mĆŻĆŸete spustit GNU/"
-"Linux nebo\n"
-"Windows, zĂĄleĆŸĂ­ kterĂœ preferujete\n"
-"\n"
-"Tlačítko \"RozơíƙenĂ©\" zobrazĂ­ dalĆĄĂ­ dvě tlačítka:\n"
-"\n"
-" * Generovat disketu pro automatickou instalaci: vytvoƙí disketu, se kterou\n"
-"lze celou instalaci opakovat bez zĂĄsahu operĂĄtora se stejnĂœmi volbami,\n"
-"kterĂ© byly zvoleny pƙi instalaci.\n"
-"\n"
-" Po klepnutí na toto tlačítko se zobrazí dalơí dvě volby:\n"
-"\n"
-" * : \"Zopakovat\": je to částečně automatická instalace, kdy se "
-"potvrzuje\n"
-"krok pƙi rozdělování diskƯ (a pouze tento krok).\n"
-"\n"
-" * : \"Automaticky\": plně automatickĂĄ instalace, data na pevnĂ©m disku\n"
-"budou zruơena a disk pƙepsán.\n"
-"\n"
-" Tato volba je velmi uĆŸitečnĂĄ, kdyĆŸ potƙebujete nainstalovat větĆĄĂ­ počet\n"
-"stejnĂœch počítačƯ. VĂ­ce o tĂ©to moĆŸnosti je na naĆĄich WWW strĂĄnkĂĄch.\n"
-"\n"
-" * \"UloĆŸit vĂœběr balíčkĆŻ\"(*): uloĆŸĂ­ vĂœběr balíčkĆŻ, kterĂœ byl zvolen pƙi\n"
-"instalaci. Pokud budete instalovat dalĆĄĂ­ počítač, vloĆŸte disketu do "
-"mechaniky\n"
-"a spusĆ„te instalaci, stiskněte [F1] a napiĆĄte na pƙíkazovĂœ ƙádek \n"
-">> linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) Potƙebujete disketu formátovanou FAT (Pod Linuxem ji vytvoƙíte pƙíkazem\n"
-"\"mformat a:\")"
+"VĆĄechny moĆŸnosti tisku pro současnou tiskĂĄrnu jsou zobrazeny nĂ­ĆŸe, nebo "
+"klepněte na tlačítko \"MoĆŸnosti tiskĂĄrny\"."
-#: ../../help.pm:1
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Enabling servers..."
+msgstr "Povoluji servery..."
+
+#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Printing test page(s)..."
+msgstr "Tisknu testovacĂ­ strĂĄnku(y)"
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "There is already a partition with mount point %s\n"
+msgstr "OddĂ­l s pƙípojnĂœm bodem %s uĆŸ existuje\n"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
"At this point, you need to decide where you want to install the Mandrake\n"
"Linux operating system on your hard drive. If your hard drive is empty or\n"
@@ -2284,51 +2204,49 @@ msgid ""
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
msgstr ""
"V tomto bodě si musĂ­te rozhodnout, na kterĂ© diskovĂ© oddĂ­ly budete\n"
"instalovat novĂœ operačnĂ­ systĂ©m Mandrake Linux. Pokud je disk prĂĄzdnĂœ\n"
@@ -2392,280 +2310,139 @@ msgstr ""
"sekci\n"
"\"Správa vaơich oddílƯ\" v pƙíručce \"Začínáme\"."
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"PoslednĂ­ otĂĄzka je na to, zda chcete spustit grafickĂ© prostƙedĂ­ pƙi startu.\n"
-"Tato otĂĄzka se zobrazĂ­ i v pƙípadě, ĆŸe nastavenĂ­ pƙedtĂ­m neotestujete.\n"
-"Je zƙejmĂ©, ĆŸe odpovĂ­te \"Ne\" v pƙípadě, ĆŸe počítač bude pracovat\n"
-"jako server nebo v pƙípadě, ĆŸe se nepodaƙilo sprĂĄvně nastavit grafickou "
-"kartu."
+msgid "Ukraine"
+msgstr "Ukrajina"
-#: ../../help.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
-"V pƙípadě, ĆŸe je pro vaĆĄi kartu moĆŸno pouĆŸĂ­t vĂ­ce rĆŻznĂœch serverĆŻ s 3D\n"
-"akceleracĂ­ nebo bez, zĂĄleĆŸĂ­ na vaĆĄem vĂœběru, kterĂœ vĂĄm nejvĂ­ce vyhovuje."
+msgid "Application:"
+msgstr "Aplikace:"
-#: ../../help.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
-msgstr ""
-"RozliĆĄenĂ­\n"
-"\n"
-" Zde si mĆŻĆŸete vybrat rozliĆĄenĂ­ a barevnou hloubku, kterĂ© vaĆĄe karta \n"
-"podporuje. Vyberte si to co vĂĄm nejvĂ­ce vyhovuje (vĂœběr lze po instalaci\n"
-"samozƙejmě změnit). Na monitoru bude zobrazena pƙíklad nastavení."
+msgid "External ISDN modem"
+msgstr "ExternĂ­ ISDN modem"
-#: ../../help.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
-msgstr ""
-"Monitor\n"
-"\n"
-" InstalačnĂ­ program dokĂĄĆŸe větĆĄinou automaticky detekovat a sprĂĄvně \n"
-"nastavit monitor pƙipojenĂœ k vaĆĄemu počítači. Pokud se to nezdaƙí, lze se\n"
-"seznamu vybrat monitor, kterĂœ mĂĄte."
+msgid "if set to yes, report check result by mail."
+msgstr "pokud je nastaveno, odesĂ­lĂĄ vĂœsledek kontroly mailem."
-#: ../../help.pm:1
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Your choice? (default %s) "
+msgstr "VaĆĄe volba? (vĂœchozĂ­ %s) "
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
+msgstr "Ƙeƥení problémƯ"
+
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid " / Region"
+msgstr "Reunion"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
+"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
-"Test\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
"\n"
-"Options\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
-" You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
-"X (X Window System) je srdcem grafického rozhraní pro GNU/Linux, které\n"
-"vyuĆŸĂ­vajĂ­ dodĂĄvanĂ© grafickĂ© prostƙedĂ­ (KDE, GNOME, AfterStep, WindowMaker).\n"
-"\n"
-"NynĂ­ bude zobrazen seznam rĆŻznĂœch parametrĆŻ, kterĂ© je moĆŸnĂ© změnit pro\n"
-"dosaĆŸenĂ­ optimĂĄlnĂ­ho grafickĂ©ho zobrazenĂ­\n"
-"GrafickĂĄ karta\n"
-"\n"
-" Instalační program je schopen automaticky detekovat a nastavit grafickou\n"
-"kartu instalovanou v počítači. Pokud se to nepodaƙí, mĂĄte moĆŸnost si ze\n"
-"seznamu vybrat pƙísluơnou grafickou kartu ručně.\n"
-"\n"
-" V pƙípadě, ĆŸe pro vaĆĄi kartu je moĆŸnĂ© pouĆŸĂ­t vĂ­ce rĆŻznĂœch serverĆŻ, s 3D\n"
-"akceleracĂ­ nebo bez, je pouze na vĂĄs, kterĂœ server si vyberete jako nejvĂ­ce\n"
-"vyhovující vaơim potƙebám.\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" InstalačnĂ­ program dokĂĄĆŸe větĆĄinou automaticky detekovat a sprĂĄvně \n"
-"nastavit monitor pƙipojenĂœ k vaĆĄemu počítači. Pokud se to nezdaƙí, lze se\n"
-"seznamu vybrat monitor, kterĂœ mĂĄte.\n"
-"\n"
-"\n"
-"RozliĆĄenĂ­\n"
+"KlasickĂœ postup pƙi ƙeĆĄenĂ­ problĂ©mĆŻ se zvukem je pomocĂ­ těchto pƙíkazĆŻ:\n"
"\n"
-" Zde si mĆŻĆŸete vybrat rozliĆĄenĂ­ a barevnou hloubku, kterĂ© vaĆĄe karta \n"
-"podporuje. Vyberte si to co vĂĄm nejvĂ­ce vyhovuje (vĂœběr lze po instalaci\n"
-"samozƙejmě změnit). Na monitoru bude zobrazena pƙíklad nastavení.\n"
"\n"
+"- \"lspcidrake -v | fgrep AUDIO\" vĂĄm ƙekne, jakĂœ ovladač je vĂœchozĂ­ pro\n"
+"danou zvukovou kartu\n"
"\n"
-"Test\n"
+"- \"grep sound-slot /etc/modules.conf\" vĂĄm ƙekne, kterĂœ ovladač se nynĂ­\n"
+"pouĆŸĂ­vĂĄ\n"
"\n"
-" SystĂ©m se pokusĂ­ otestovat grafickou obrazovku v poĆŸadovanĂ©m rozliĆĄenĂ­.\n"
-"Pokud během testu uvidíte zprávy a odpovíte na ni \"Ano\", instalační "
-"program\n"
-"bude pokračovat dalĆĄĂ­m krokem. Pokud zprĂĄvu neuvidĂ­te, znamenĂĄ to, ĆŸe "
-"některá\n"
-"část automatickĂ© detekce neproběhla v poƙádku a test automaticky za 12 "
-"vteƙin\n"
-"skončí s tĂ­m, ĆŸe se provede nĂĄvrat k zĂĄkladnĂ­ nabĂ­dce. NĂĄsledně je moĆŸnĂ© "
-"opět\n"
-"provĂ©st změny aĆŸ do tĂ© doby, neĆŸ bude zobrazeno sprĂĄvnĂ© rozliĆĄenĂ­.\n"
+"- \"/sbin/lsmod\" provede kontrolu toho, zda modul (ovladač) je nahrán nebo "
+"ne\n"
"\n"
+"- \"/sbin/chkconfig --list sound\" a \"/sbin/chkconfig --list alsa\" vĂĄm "
+"sdělí\n"
+"zda je pro initlevel nastaveny sluĆŸby alsa a sound\n"
"\n"
-"Volby\n"
+"- \"aumix -q\" vám ƙekne, zda je zvuk ztlumen nebo ne\n"
"\n"
-" Zde si mĆŻĆŸete vybrat, zda chcete provĂ©st automatickĂœ start grafickĂ©ho\n"
-"prostƙedĂ­ po spuĆĄtěnĂ­ systĂ©mu. Je samozƙejmĂ©, ĆŸe pokud bude počítač "
-"provozovĂĄn\n"
-"jako server, je nutnĂ© odpovědět \"Ne\"."
+"- \"/sbin/fuser -v /dev/dsp\" vĂĄm ƙekne, kterĂœ program pouĆŸĂ­vĂĄ zvukovou "
+"kartu.\n"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
msgstr ""
-"GrafickĂĄ karta\n"
-"\n"
-" Instalační program je schopen automaticky detekovat a nastavit grafickou\n"
-"kartu instalovanou v počítači. Pokud se to nepodaƙí, mĂĄte moĆŸnost si ze\n"
-"seznamu vybrat pƙísluơnou grafickou kartu ručně.\n"
+"ZkuĆĄebnĂ­ strĂĄnka(y) byla(y) poslĂĄna(y) na tiskĂĄrnu.\n"
+"MĆŻĆŸe chvilku trvat neĆŸ začne tisk.\n"
+"Stav tisku:\n"
+"%s\n"
"\n"
-" V pƙípadě, ĆŸe pro vaĆĄi kartu je moĆŸnĂ© pouĆŸĂ­t vĂ­ce rĆŻznĂœch serverĆŻ, s 3D\n"
-"akceleracĂ­ nebo bez, je pouze na vĂĄs, kterĂœ server si vyberete jako nejvĂ­ce\n"
-"vyhovující vaơim potƙebám."
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
-msgstr ""
-"GNU/Linux spravuje čas podle GMT (Greenwich Mean Time) a pƙevádí ho na\n"
-"čas podle pƙísluĆĄnĂ© vybranĂ© časovĂ© zĂłny. Toto je moĆŸnĂ© zruĆĄit odznačenĂ­m\n"
-"volby \"Hodiny nastaveny na GMT\" a tak budou systémové hodiny stejné jako\n"
-"hardwarovĂ©. To je uĆŸitečnĂ© v pƙípadě, ĆŸe je na počítači jinĂœ operačnĂ­ "
-"systém\n"
-"typu Windows.\n"
-"\n"
-"Volba \"AutomatickĂĄ synchronizace času\" provĂĄdĂ­ automatickĂ© nastavenĂ­ "
-"hodin\n"
-"pomocĂ­ pƙipojenĂ­ k časovĂ©mu serveru na Internetu. Vyberte si v seznamu ten "
-"server,\n"
-"kterĂœ je vĂĄm nejblĂ­ĆŸ. Je samozƙejmĂ©, ĆŸe pro sprĂĄvnou funkci musĂ­te mĂ­t "
-"funkční\n"
-"pƙipojenĂ­ k Internetu. Na počítač se takĂ© nainstaluje časovĂœ server, kterĂœ\n"
-"mohou volitelně pouĆŸĂ­vat jinĂ© počítače ve vaĆĄĂ­ lokĂĄlnĂ­ sĂ­ti."
+msgid "daily"
+msgstr "kaĆŸdĂœ den"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"NynĂ­ si zvolte, kterĂ© sluĆŸby majĂ­ bĂœt spuĆĄtěny pƙi startu počítače.\n"
-"\n"
-"Je zde seznam vĆĄech sluĆŸeb, kterĂ© jsou aktuĂĄlně nainstalovĂĄny.\n"
-"ProhlĂ©dněte si seznam pozorně a zruĆĄte ty, kterĂ© nepotƙebujete spouĆĄtět pƙi\n"
-"startu počítače.\n"
-"\n"
-"Pokud pƙejedete myĆĄĂ­ nad některou poloĆŸkou, objevĂ­ se malĂĄ nĂĄpověda\n"
-"s popisem, co danĂĄ sluĆŸba dělĂĄ. Pokud pƙesně nevĂ­te, zda je sluĆŸba uĆŸitečnĂĄ\n"
-"nebo ne, je lepĆĄĂ­ ji nechat ve vĂœchozĂ­m stavu.\n"
-"\n"
-"!! RozvaĆŸte, co za sluĆŸby spustit, zvlĂĄĆĄtě pokud budete počítač provozovat\n"
-"jako server: nepotƙebujete vĆĄechny sluĆŸby. Pamatujte, ĆŸe čím vĂ­ce sluĆŸeb\n"
-"je spuĆĄtěno, tĂ­m je větĆĄĂ­ nebezpečí neĆŸĂĄdoucĂ­ho proniknutĂ­ do počítače.\n"
-"TakĆŸe povolte opravdu jen ty sluĆŸby, kterĂ© nezbytně potƙebujete.\n"
-"!!"
+msgid "and one unknown printer"
+msgstr "a jedna neznĂĄmĂĄ tiskĂĄrna"
-#: ../../help.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
-"\"Tiskárna\": klepnutím na \"Nastavit\" se otevƙe prƯvodce nastavením.\n"
-"Jak nastavit tiskĂĄrnu se takĂ© dozvĂ­te z odpovĂ­dajĂ­cĂ­ kapitoly z pƙíručky\n"
-"\"ZačínĂĄme\". RozhranĂ­ je podobnĂ© tomu, kterĂ© vidĂ­te pƙi instalaci."
+msgid "Ireland"
+msgstr "Irsko"
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "kernel version"
+msgstr "verze jĂĄdra"
+
+#: ../../standalone/drakbackup:1
#, c-format
+msgid " Restore Configuration "
+msgstr " Obnovit nastavenĂ­ "
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Is this the correct setting?"
+msgstr "Je toto språvné nastavení?"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
@@ -2706,4600 +2483,4339 @@ msgstr ""
"nastavit\n"
"pƙipojení k síti později po instalaci, klepněte na tlačítko \"Zruơit\"."
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
-"V zĂĄvislosti na tom, zda jste zvolili individuĂĄlnĂ­ vĂœběr balíčkĆŻ, se "
-"nabĂ­dne\n"
-"stromovĂĄ struktura obsahujĂ­cĂ­ vĆĄechny balíčky organizovanĂ© do skupin\n"
-"a podskupin. Pƙi prochĂĄzenĂ­ stromu mĆŻĆŸete vybrat jednotlivĂ© balíčky, "
-"podskupiny\n"
-"nebo celé skupiny.\n"
-"\n"
-"Pokud vyberete ze stromu balíček, objevĂ­ se v pravĂ© části jeho popis.\n"
-"\n"
-"!! Pokud se nachĂĄzĂ­ mezi vybranĂœmi balíčky serverovĂ© programy, aĆ„ uĆŸ "
-"vybrané\n"
-"záměrně nebo jako součást skupiny, zobrazí se dotaz na to,\n"
-"zda opravdu chcete tyto servery nainstalovat. V distribuci Mandrake Linux\n"
-"jsou tyto servery spuĆĄtěny pƙi startu systĂ©mu. I kdyĆŸ v době vydĂĄnĂ­ "
-"distribuce\n"
-"nejsou znĂĄmy ĆŸĂĄdnĂ© bezpečnostnĂ­ problĂ©my, mohou se vyskytnout později.\n"
-"Pokud nevĂ­te, k čemu jsou určeny některĂ© serverovĂ© sluĆŸby, klepněte na \"Ne"
-"\".\n"
-"KlepnutĂ­m na \"Ano\" se danĂ© sluĆŸby nainstalujĂ­ a automaticky spustĂ­ pƙi "
-"startu !!\n"
-"\n"
-"Volba \"Automatické zåvislosti\" vypne varovné hlåƥení, které se objeví\n"
-"vĆŸdy, kdyĆŸ vyberete balíček, kterĂœ mĂĄ dalĆĄĂ­ zĂĄvislosti a instalačnĂ­ program\n"
-"musĂ­ vybrat dalĆĄĂ­ potƙebnĂ© balíčky, aby instalace mohla proběhnout Ășspěơně.\n"
-"\n"
-"MalĂĄ ikonka diskety dole umoĆŸĆˆuje nahrĂĄt jiĆŸ pƙedem vybranĂœ seznam balíčkĆŻ.\n"
-"Po klepnutĂ­ na ikonu budete dotĂĄzĂĄni na vloĆŸenĂ­ diskety, kterĂĄ byla "
-"vytvoƙena na\n"
-"konci jinĂ© instalace. Ve druhĂ©m tipu pƙi poslednĂ­m kroku najdete nĂĄvod, jak "
-"si\n"
-"tuto disketu vytvoƙit. "
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"V tĂ©to chvĂ­li je moĆŸnĂ© vybrat, kterĂ© programy chcete nainstalovat na vĂĄĆĄ "
-"systém.\n"
-"Mandrake Linux obsahuje tisíce balíčkƯ s programy a pro snadnějơí orientaci\n"
-"byly rozděleny do skupin, kterĂ© sdruĆŸujĂ­ podobnĂ© aplikace.\n"
-"\n"
-"Balíčky jsou rozděleny do skupin, kterĂ© odpovĂ­dajĂ­ tomu, jak je nejčastěji\n"
-"počítač pouĆŸĂ­vĂĄn. Skupiny samotnĂ© jsou umĂ­stěny do čtyƙ sekcĂ­. VĂœběr "
-"aplikacĂ­\n"
-"z těchto sekcĂ­ lze rĆŻzně kombinovat, takĆŸe mĆŻĆŸete mĂ­t celou instalovĂĄnu "
-"sekci\n"
-"\"PracovnĂ­ stanice\" a k nĂ­ nějakĂ© aplikace ze sekce \"VĂœvoj\".\n"
-"\n"
-" * \"PracovnĂ­ stanice\": pokud plĂĄnujete pouĆŸĂ­vat počítač pƙevĂĄĆŸně na\n"
-"bÄ›ĆŸnou prĂĄci, vyberte si z dalĆĄĂ­ch skupin odpovĂ­dajĂ­cĂ­ balíčky.\n"
-"\n"
-" * \"VĂœvoj\": pokud budete na počítači programovat, mĆŻĆŸete si z tĂ©to\n"
-"sekce vybrat dalĆĄĂ­ skupiny.\n"
-"\n"
-" * \"Server\": pokud bude počítač provozovĂĄn jako server, mĂĄte moĆŸnost\n"
-"vybrat si ty nejbÄ›ĆŸnějĆĄĂ­ sluĆŸby, kterĂ© chcete nainstalovat.\n"
-"\n"
-" * \"GrafickĂĄ prostƙedĂ­\": pokud preferujete grafickĂ© prostƙedĂ­, zde je\n"
-"nabĂ­dka několika prostƙedĂ­, ze kterĂ© si musĂ­te vybrat nejmĂ©ně jedno,\n"
-"aby bylo moĆŸnĂ© grafickĂ© prostƙedĂ­ nainstalovat.\n"
-"\n"
-"Pokud pƙejedete myĆĄĂ­ nad skupinou, objevĂ­ se krĂĄtkĂœ text, kterĂœ vysvětluje,\n"
-"co je obsahem danĂ© skupiny. Pokud nevyberete pƙi instalaci ĆŸĂĄdnou skupinu,\n"
-"zobrazí se otázka na instalaci několika typƯ minimální instalace:\n"
-"\n"
-" * \"Podpora X\" Provede instalaci minimální podpory pro prostƙedí X-"
-"Window.\n"
-"\n"
-" * \"Se zåkladní dokumentací\" Nainstaluje systém se zåkladními programy a\n"
-"jejich dokumentacĂ­. Tento typ je vhodnĂœ pro instalaci serveru.\n"
-"\n"
-" * \"Minimålní instalace\" Nainstaluje se opravdu nezbytné minimum, aby "
-"bylo\n"
-"moĆŸnĂ© provozovat Linux z pƙíkazovĂ© ƙádky. Instalace zabere asi 65MB.\n"
-"\n"
-"Pokud zatrhnete volbu \"VlastnĂ­ vĂœběr balíčkĆŻ\", zobrazĂ­ se seznam vĆĄech\n"
-"balíčkĆŻ, kterĂ© je moĆŸno nainstalovat. To je to uĆŸitečnĂ© v pƙípadě, ĆŸe "
-"chcete\n"
-"mĂ­t absolutnĂ­ kontrolu nad tĂ­m, co se bude instalovat.\n"
-"\n"
-"Pokud jste spustili instalaci v reĆŸimu \"Aktualizace\", mĆŻĆŸete zruĆĄit vĂœběr\n"
-"danĂœch skupin, čímĆŸ zabrĂĄnĂ­te instalaci novĂœch balíčkĆŻ. To je uĆŸitečnĂ©\n"
-"pro pƙípad opravy nebo aktualizace existujĂ­cĂ­ho systĂ©mu."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
-msgstr ""
-"Distribuce Mandrake Linux je sloĆŸena z několika CD. InstalačnĂ­ program vĂ­,\n"
-"na kterĂ©m disku je umĂ­stěn jakĂœ soubor a v pƙípadě potƙeby vysune CD a "
-"vyĆŸĂĄdĂĄ\n"
-"si vĂœměnu CD za poĆŸadovanĂ©."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Zde je vypsĂĄn seznam jiĆŸ existujĂ­cĂ­ch detekovanĂœch oddĂ­lĆŻ na pevnĂ©m disku.\n"
-"MĆŻĆŸete ponechat volby detekovanĂ© prĆŻvodcem, protoĆŸe ve větĆĄině pƙípadĆŻ\n"
-"vyhovujĂ­. Pokud chcete provĂ©st nějakĂ© změny, musĂ­te definovat aspoƈ "
-"koƙenovĂœ\n"
-"oddĂ­l (\"/\"). Velikost oddĂ­lĆŻ zvolte dostatečnou, jinak nebude moĆŸnĂ© "
-"nainstalovat\n"
-"dostatečnĂ© mnoĆŸstvĂ­ programĆŻ. Pokud chcete uklĂĄdat data na zvlĂĄĆĄtnĂ­ oddĂ­l,\n"
-"vytvoƙte takĂ© oddĂ­l \"/home\".\n"
-"\n"
-"KaĆŸdĂœ oddĂ­l vypsanĂœ nĂ­ĆŸe mĂĄ: \"NĂĄzev\", \"Velikost\".\n"
-"\n"
-"\"NĂĄzev\" je sloĆŸen nĂĄsledovně: \"typ pevnĂ©ho disku\", \"číslo disku\",\n"
-"\"číslo oddílu\". (napƙíklad \"hda1\").\n"
-"\n"
-"Pokud måte IDE disky, pak je \"typ pevného disku\" \"hd\", pokud måte SCSI,\n"
-"označení bude \"sd\".\n"
-"\n"
-"\"Číslo disku\" je vĆŸdy pĂ­smeno za \"hd\" nebo \"sd\". Pro IDE disky je "
-"takto:\n"
-"\n"
-" * \"a\" znamená \"master disk na primárním IDE ƙadiči\",\n"
-"\n"
-" * \"b\" znamená \"slave disk na primárním IDE ƙadiči\",\n"
-"\n"
-" * \"c\" znamená \"master disk na sekundárním IDE ƙadiči\",\n"
-"\n"
-" * \"d\" znamená \"slave disk na sekundárním IDE ƙadiči\".\n"
-"\n"
-"Pro SCSI disky platĂ­, ĆŸe \"a\" je \"nejmenĆĄĂ­ SCSI ID\", \"b\" je \"druhĂ©\n"
-"nejmenĆĄĂ­ SCSI ID\" atd."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
-msgstr ""
-"GNU/Linux je vĂ­ceuĆŸivatelskĂœ systĂ©m, coĆŸ znamenĂĄ, ĆŸe kaĆŸdĂœ uĆŸivatel mĆŻĆŸe\n"
-"mĂ­t svĂ© vlastnĂ­ nastavenĂ­, soubory atd. VĂ­ce se dočtete v pƙíručce \"ZačínĂĄme"
-"\".\n"
-"Na rozdĂ­l od uĆŸivatele root, kterĂœ je sprĂĄvcem počítače, uĆŸivatelĂ©, kteƙí "
-"jsou\n"
-"zde vytvoƙeni, nemajĂ­ oprĂĄvněnĂ­ měnit nic kromě svĂœch vlastnĂ­ch souborĆŻ a\n"
-"nastavenĂ­. Doporučuje se vytvoƙit Ășčet pro minimĂĄlně jednoho bÄ›ĆŸnĂ©ho "
-"uĆŸivatele.\n"
-"Tento Ășčet se pouĆŸĂ­vĂĄ na vĆĄechny bÄ›ĆŸnĂ© Ășkoly. Ačkoliv je velmi praktickĂ©\n"
-"pƙihlaĆĄovat se kaĆŸdĂœ den jako uĆŸivatel root, je to takĂ© velmi nebezpečnĂ©!\n"
-"Jedna malĂĄ chyba mĆŻĆŸe zpĆŻsobit, ĆŸe celĂœ operačnĂ­ systĂ©m jiĆŸ nebude funkčnĂ­.\n"
-"Pokud udělĂĄte chybu jako normĂĄlnĂ­ uĆŸivatel, mĆŻĆŸete pƙijĂ­t pouze o svĂ© "
-"informace,\n"
-"ale nepoĆĄkodĂ­ se celĂœ systĂ©m.\n"
-"\n"
-"Jako prvnĂ­ zadejte vaĆĄe skutečnĂ© jmĂ©no. To nenĂ­ samozƙejmě povinnĂ© - mĆŻĆŸete\n"
-"zadat co chcete. Aplikace DrakX pouĆŸije prvnĂ­ slovo jako uĆŸivatelskĂ© jmĂ©no,\n"
-"pod kterĂœm se bude uĆŸivatel hlĂĄsit do systĂ©mu, a pƙedvyplnĂ­ jej do políčka\n"
-"\"UĆŸivatelskĂ© jmĂ©no\". To je moĆŸnĂ© nĂĄsledně změnit.\n"
-"DĂĄle se zadĂĄvĂĄ heslo pro uĆŸivatele. Volba hesla pro normĂĄlnĂ­ uĆŸivatele sice "
-"nenĂ­\n"
-"z hlediska bezpečnosti tak kritická jako v pƙípadě správce, ale i tak se "
-"doporučuje\n"
-"ji nepodceƈovat; koneckoncĆŻ, jde o zabezpečenĂ­ souborĆŻ tohoto uĆŸivatele.\n"
-"\n"
-"Pokud klepnete na \"Pƙidat uĆŸivatele\", mĆŻĆŸete pƙidĂĄvat uĆŸivatelĆŻ, kolik\n"
-"potƙebujete, napƙ. svĂ© pƙátele, Ășčet pro otce či sestru. Pokud mĂĄte vĆĄechny\n"
-"uĆŸivatele vytvoƙeny, klepněte na tlačítko \"Hotovo\". \n"
-"\n"
-"KlepnutĂ­m na tlačítko \"RozơíƙenĂ©\" mĆŻĆŸete pro novĂœ Ășčet změnit shell, "
-"kterĂœ\n"
-"bude uĆŸivatel pouĆŸĂ­vat (vĂœchozĂ­ je bash)."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
-msgstr ""
-"PƙedtĂ­m, neĆŸ budete pokračovat, pƙečtěte si pozorně podmĂ­nky licence. Ty\n"
-"se vztahují k celé distribuci Mandrake Linux a pokud s nimi nesouhlasíte,\n"
-"klepněte na tlačítko \"Odmítnout\". Instalace ihned skončí. Pokud chcete "
-"pokračovat\n"
-"v instalaci, klepněte na tlačítko \"Pƙijmout\"."
-
-#: ../../install2.pm:1
-#, c-format
-msgid "You must also format %s"
-msgstr "Musíte také naformåtovat %s"
-
-#: ../../install2.pm:1
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Nelze načíst moduly pro jĂĄdro odpovĂ­dajĂ­cĂ­ instalovanĂ©mu jĂĄdru (chybĂ­ "
-"soubor\n"
-"%s), coĆŸ obecně znamenĂĄ, ĆŸe spouĆĄtěcĂ­ disketa nemĂĄ jĂĄdro stejnĂ© jako mĂĄ "
-"instalačnĂ­ mĂ©dium (vytvoƙte prosĂ­m novou spouĆĄtěcĂ­ disketu)"
-
-#: ../../install_any.pm:1
-#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Stala se chyba - nebylo nalezeno ĆŸĂĄdnĂ© zaƙízenĂ­ na kterĂ©m by se daly "
-"vytvoƙit novĂ© souborovĂ© systĂ©my. Zkontrolujte prosĂ­m hardware"
-
-#: ../../install_any.pm:1 ../../partition_table.pm:1
-#, c-format
-msgid "Error reading file %s"
-msgstr "Chyba pƙi čtení souboru %s"
-
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Pokud chcete pouĆŸĂ­t uloĆŸenĂœ vĂœběr balíčkĆŻ, spusĆ„te instalaci takto: 'linux "
-"defcfg=floppy'"
+msgid "Wizard Configuration"
+msgstr "PrĆŻvodce konfiguracĂ­"
-#: ../../install_any.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "Tato disketa nenĂ­ formĂĄtovĂĄna"
+msgid "Autoprobe"
+msgstr "Automatické prozkoumåní"
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "VloĆŸte naformĂĄtovanou disketu do %s"
+msgid "Backup system files..."
+msgstr "Zålohovat systémové soubory..."
#: ../../install_any.pm:1
#, c-format
msgid "Can't use broadcast with no NIS domain"
msgstr "Nelze pouĆŸĂ­t vĆĄesměrovĂ© vysĂ­lĂĄnĂ­ bez NIS domĂ©ny"
-#: ../../install_any.pm:1
-#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-"NĂĄsledujĂ­cĂ­ balíčky budou odebrĂĄny pro umoĆŸněnĂ­ aktualizace systĂ©mu: %s\n"
-"\n"
-"\n"
-"Opravdu chcete odebrat tyto balíčky?\n"
-
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No"
-msgstr "Ne"
+msgid "Removing printer \"%s\"..."
+msgstr "OdebĂ­rĂĄm tiskĂĄrnu \"%s\"..."
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Yes"
-msgstr "Ano"
+msgid "drakfloppy"
+msgstr "drakfloppy"
-#: ../../install_any.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
+"Please indicate where the auto_install.cfg file is located.\n"
"\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
-"Do you really want to install these servers?\n"
msgstr ""
-"Vybrali jste pro instalaci nĂĄsledujĂ­cĂ­ server(y): %s\n"
-"\n"
-"\n"
-"Tyto servery budou standardně aktivovĂĄny. PƙestoĆŸe nenĂ­ znĂĄmĂœ ĆŸĂĄdnĂœ\n"
-"bezpečnostnĂ­ problĂ©m, mohou se pƙesto vyskytnout. Je proto dĆŻleĆŸitĂ© "
-"aktualizovat\n"
-"vĆŸdy, kdyĆŸ je to potƙeba.\n"
+"Určete, kde je umístěn soubor auto_install.cfg.\n"
"\n"
+"Ponechte prĂĄzdnĂ©, pokud nechcete pouĆŸĂ­t reĆŸim automatickĂ© instalace.\n"
"\n"
-"Chcete opravdu nainstalovat tyto servery?\n"
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System configuration"
-msgstr "Konfigurace systému"
-
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System installation"
-msgstr "Instalace systému"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Bringing down the network"
-msgstr "Zastavuji sĂ­Ć„"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "information level that can be obtained through the cpuid instruction"
+msgstr "Úroveƈ, kterou lze získat po provedení instrukce cpuid"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Bringing up the network"
-msgstr "Startuji sĂ­Ć„"
+msgid "Peru"
+msgstr "Peru"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Partitioning failed: %s"
-msgstr "VytváƙenĂ­ diskovĂœch oddĂ­lĆŻ selhalo: %s"
+msgid " on device: %s"
+msgstr " na zaƙízení: %s"
#: ../../install_interactive.pm:1
#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "PrƯvodce DrakX naơel následující ƙeơení:"
+msgid "Remove Windows(TM)"
+msgstr "Odstranit Windows(TM)"
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "I can't find any room for installing"
-msgstr "NemĆŻĆŸu najĂ­t ĆŸĂĄdnĂ© volnĂ© mĂ­sto pro instalaci"
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr "Startuje X Font Server (to je nezbytnĂ© pro běh XFree)."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
msgstr ""
-"NynĂ­ mĆŻĆŸete rozdělit vĂĄĆĄ pevnĂœ disk %s.\n"
-"AĆŸ skončíte, nezapomeƈte uloĆŸit změny pomocĂ­ 'w'"
+"VětĆĄina těchto ĂșdajĆŻ byla zĂ­skĂĄna z vaĆĄeho\n"
+"bÄ›ĆŸĂ­cĂ­ho systĂ©mu. MĆŻĆŸete je upravit dle potƙeby"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Use fdisk"
-msgstr "PouĆŸĂ­t fdisk"
+msgid "Select the font file or directory and click on 'Add'"
+msgstr "Vyberte soubor s fontem nebo adresáƙ a klepněte na 'Pƙidat'"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Custom disk partitioning"
-msgstr "Vlastní rozdělení disku"
+msgid "Madagascar"
+msgstr "Madagaskar"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "VƠECHNY diskové oddíly a data na disku %s budou zruƥena"
+msgid "Urpmi"
+msgstr "Urpmi"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "MĂĄte vĂ­ce neĆŸ jeden pevnĂœ disk, na kterĂœ chcete instalovat Linux?"
+msgid "Cron not available yet as non-root"
+msgstr "SluĆŸby cronu nejsou zatĂ­m pro bÄ›ĆŸnĂ© uĆŸivatele dostupnĂ©."
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Erase entire disk"
-msgstr "Smazat celĂœ disk"
+msgid "System"
+msgstr "Systém"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Odstranit Windows(TM)"
+msgid "Do you want to use this feature?"
+msgstr "Chcete pouĆŸĂ­t tuto vlastnost?"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr ""
-"Nejsou zde ĆŸĂĄdnĂ© FAT oddĂ­ly, kterĂ© by bylo moĆŸnĂ© změnit (nebo nenĂ­ dostatek "
-"mĂ­sta)"
+msgid "Arabic"
+msgstr "Arabské"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"\n"
+"- Options:\n"
msgstr ""
-"Pro zachovĂĄnĂ­ integrity po provedenĂ© změně velikosti oddĂ­lu(ĆŻ) bude pƙi\n"
-"dalĆĄĂ­m spuĆĄtěnĂ­ systĂ©mu Windows provedena kontrola souborovĂ©ho systĂ©mu."
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Změna FAT oddílu neuspěla: %s"
+"\n"
+"- Volby:\n"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Resizing Windows partition"
-msgstr "PočítĂĄm hranice souborovĂ©ho systĂ©mu s Windows"
+msgid "Password required"
+msgstr "VyĆŸadovĂĄno heslo"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Resizing"
-msgstr "Měním velikost"
+msgid "%d minutes"
+msgstr "%d minut(y)"
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "partition %s"
-msgstr "diskovém oddílu %s"
+msgid "Graphics card: %s"
+msgstr "GrafickĂĄ karta: %s"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Jakou velikost oddĂ­lu chcete nechat pro Windows na"
+msgid "WebDAV transfer failed!"
+msgstr "Pƙenos protokolem WebDAV selhal!"
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"VAROVÁNÍ!\n"
-"\n"
-"DrakX nyní musí zmenơit oddíl s Windows. Buďte opatrní: tato operace je\n"
-"nebezpečnĂĄ. Pokud jste tak jiĆŸ neučinili, měli byste nejprve ukončit "
-"instalaci,\n"
-"spustit scandisk ve Windows (popƙípadě i defrag) a potom instalaci znovu "
-"spustit\n"
-"TakĂ© byste si měli data zĂĄlohovat. AĆŸ si budete jistĂ­, ĆŸe chcete pokračovat\n"
-"stiskněte Ok."
+msgid "XFree configuration"
+msgstr "NastavenĂ­ XFree"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
-msgstr ""
-"VĂĄĆĄ diskovĂœ oddĂ­l s Windows je pƙíliĆĄ fragmentovĂĄn. Restartujte počítač do "
-"systĂ©mu Windows, pouĆŸijte program 'defrag' a potom spusĆ„te opět instalaci."
+msgid "Choose action"
+msgstr "Co uděláte ?"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "PočítĂĄm volnĂ© mĂ­sto na Windows oddĂ­lu"
+msgid "French Polynesia"
+msgstr "Francouzskå Polynésie"
-#: ../../install_interactive.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
msgstr ""
-"Změnu velikost FAT nenĂ­ moĆŸnĂ© provĂ©st, \n"
-"vyskytla se nĂĄsledujĂ­cĂ­ chyba: %s"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Na kterĂ©m oddĂ­lu chcete měnit velikost?"
+"Aplikace DrakX obvykle zjistí počet tlačítek na vaơí myơi. Pokud ne, "
+"pƙedpokládá,\n"
+"ĆŸe mĂĄte dvoutlačítkovou myĆĄ a nastavĂ­ emulaci pro tƙetĂ­ tlačítko myĆĄi. "
+"Aplikace\n"
+"také umí rozpoznat, zda se jednå o myƥ PS/2, USB nebo sériovou.\n"
+"\n"
+"Pokud chcete zadat jinĂœ typ myĆĄi, vyberte odpovĂ­dajĂ­cĂ­ typ se seznamu.\n"
+"\n"
+"Pokud vyberete jinou myĆĄ neĆŸ ta, kterĂĄ byla detekovĂĄna, zobrazĂ­ se "
+"testovacĂ­\n"
+"obrazovka. Zde otestujte jak tlačítka tak i kolečko a ověƙte, zda je "
+"nastavenĂ­\n"
+"sprĂĄvnĂ©. Pokud myĆĄ nepracuje sprĂĄvně, stiskněte mezernĂ­k nebo klĂĄvesu Enter\n"
+"na \"ZruĆĄit\"\n"
+" a vyberte jinĂœ typ.\n"
+"\n"
+"MyĆĄi s kolečkem nejsou v některĂœch pƙípadech automaticky rozpoznĂĄny. Budete\n"
+"je muset vybrat ze seznamu. Ujistěte se, ĆŸe vyberete myĆĄ s odpovĂ­dajĂ­cĂ­m "
+"typem\n"
+"portu, ke kterĂ©mu je pƙipojenĂĄ. PotĂ©, co stisknete tlačítko \"DĂĄle ->\", \n"
+"zobrazí se obrázek s myơí. Aby se správně kolečko aktivovalo, musíte "
+"pohybovat\n"
+"kolečkem vaơí myơi.\n"
+"PotĂ© ověƙte, zda-li je sprĂĄvnĂ© nastavenĂ­ tlačítek a pohybu vaĆĄĂ­ myĆĄi."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "PouĆŸĂ­t volnĂ© mĂ­sto na Windows oddĂ­lu"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "Podpora pro OKI 4w a kompatibilnĂ­ wintiskĂĄrny."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"Nejsou zde ĆŸĂĄdnĂ© FAT oddĂ­ly, kterĂ© by bylo pouĆŸĂ­t pro loopback (nebo nenĂ­ "
-"dostatek mĂ­sta)"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr "Spustit zvukovĂœ systĂ©m ALSA (Advanced Linux Sound Architecture)"
-#: ../../install_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Velikost odklĂĄdacĂ­ho oddĂ­lu v MB: "
+msgid "Installing driver for %s card %s"
+msgstr "Instaluji ovladač pro %s kartu %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Root partition size in MB: "
-msgstr "Velikost koƙenovĂ©ho oddĂ­lu v MB:"
+msgid ""
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
+msgstr ""
+"Byla pƙenesena vĂœchozĂ­ tiskĂĄrna (\"%s\"). MĂĄ se nastavit jako vĂœchozĂ­ takĂ© "
+"na vzdåleném tiskovém systému %s?"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Choose the sizes"
-msgstr "Zvolte velikosti"
+msgid "Enable Server"
+msgstr "Zapnout server"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "KterĂœ diskovĂœ oddĂ­l chcete pouĆŸĂ­t pro Linux4Win?"
+msgid "Ukrainian"
+msgstr "Ukrajinské"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "PouĆŸĂ­t Windows oddĂ­l jako loopback"
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
+msgstr ""
+"SĂ­Ć„ nefunguje a nelze ji spustit. ProsĂ­m zkontrolujte nastavenĂ­ hardware. "
+"Pak se opět pokuste provĂ©st nastavenĂ­ vzdĂĄlenĂ© tiskĂĄrny."
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "There is no existing partition to use"
-msgstr "NenĂ­ zde ĆŸĂĄdnĂœ existujĂ­cĂ­ oddĂ­l k pouĆŸitĂ­"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "VloĆŸte prosĂ­m spouĆĄtěcĂ­ disketu do %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use existing partitions"
-msgstr "PouĆŸĂ­t existujĂ­cĂ­ oddĂ­l"
+msgid "Local network(s)"
+msgstr "LokĂĄlnĂ­ sĂ­Ć„(ě)"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "NenĂ­ dostatek mĂ­sta pro vytvoƙenĂ­ novĂ©ho diskovĂ©ho oddĂ­lu"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
+msgstr "Odstranit Windows(TM)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Use free space"
-msgstr "PouĆŸĂ­t volnĂ© mĂ­sto"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr ""
+"VĂĄĆĄ skener %s byl nastaven.\n"
+"NynĂ­ lze skenovat dokumenty pomocĂ­ aplikace \"XSane\" z nabĂ­dky aplikacĂ­ "
+"Multimédia/Grafika."
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "MusĂ­te mĂ­t FAT oddĂ­l pƙipojenĂœ na /boot/efi"
+msgid "Firewire controllers"
+msgstr "Firewire kontroléry"
-#: ../../install_interactive.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"You don't have a swap partition.\n"
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
"\n"
-"Continue anyway?"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
msgstr ""
-"NemĂĄte odklĂĄdacĂ­ oddĂ­l\n"
+"Po nastavenĂ­ obecnĂœch parametrĆŻ zavaděče systĂ©mu bude k dispozici\n"
+"seznam voleb pro zavĂĄděnĂ­, kterĂœ se zobrazĂ­ pƙi zavĂĄděnĂ­ systĂ©mu.\n"
"\n"
-"Chcete pƙesto pokračovat?"
+"Pokud jiĆŸ mĂĄte na počítači jinĂœ operačnĂ­ systĂ©m, automaticky bude zaƙazen "
+"do\n"
+"nabĂ­dky pro spouĆĄtěnĂ­. Zde je moĆŸnĂ© dĂĄle doladit volby, kterĂ© se pƙedĂĄvajĂ­ "
+"tĂ­m,\n"
+"ĆŸe na danou nabĂ­dkou vyberete a klepnete na tlačítko \"Upravit\", pokud jej "
+"chcete\n"
+"upravit, \"Odstranit\" pouĆŸijte pro odebrĂĄnĂ­ a \"Pƙidat\" pouĆŸijte pokud "
+"chcete\n"
+"vytvoƙit novou poloĆŸku.\n"
+"K dalơímu kroku se dostanete klepnutím na tlačítko \"Hotovo\".\n"
+"\n"
+"Pokud nechcete umoĆŸnit pƙístup k těmto operačnĂ­m systĂ©mĆŻm komukoliv, mĆŻĆŸete\n"
+"je z nabĂ­dky odstranit smazĂĄnĂ­m odpovĂ­dajĂ­cĂ­ch poloĆŸek.. V tom pƙípadě ale\n"
+"musĂ­te mĂ­t spouĆĄtěcĂ­ disketu, ze kterĂ© je moĆŸnĂ© tento operačnĂ­ systĂ©m "
+"spustit!"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"MusĂ­te mĂ­t koƙenovĂœ oddĂ­l.\n"
-"K jeho vytvoƙení musíte zvolit jeden existující oddíl\n"
-"(nebo vytvoƙit novĂœ), zvolit 'PƙípojnĂœ bod'\n"
-"a nastavit ho na '/'"
+msgid "System mode"
+msgstr "SystĂ©movĂœ reĆŸim"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
msgstr ""
-"Některá část vaơeho hardware potƙebuje 'speciální' ovladače, aby mohla "
-"pracovat.\n"
-"DalĆĄĂ­ informace mĆŻĆŸete nalĂ©zt na: %s"
+"Abyste mohli tisknout na NetWare tiskárně, musíte zadat název NetWare "
+"serveru (Pozor! To mĆŻĆŸe bĂœt odliĆĄnĂ© od jeho nĂĄzvu pro TCP/IP!), nĂĄzev "
+"tiskovĂ© fronty tiskĂĄrny, kterou chcete pouĆŸĂ­vat, uĆŸivatelskĂ© jmĂ©no a heslo."
-#: ../../install_messages.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Gratulujeme vám, instalace je dokončena.\n"
-"Vyjměte startovacĂ­ mĂ©dia a stiskněte Return pro restart.\n"
-"\n"
-"\n"
-"Na opravy této instalace systému Mandrake Linux se lze informovat\n"
-"na strĂĄnce Errata:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Informace o konfiguraci systému po instalaci jsou dostupné\n"
-"v danĂ© kapitole oficiĂĄlnĂ­ uĆŸivatelskĂ© pƙíručky pro Mandrake Linux."
+msgid "Netmask:"
+msgstr "Maska sítě:"
-#: ../../install_messages.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr "http://www.mandrakelinux.com/en/91errata.php3"
+msgid "Append"
+msgstr "Pƙipojit"
-#: ../../install_messages.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr "Obnovit seznam tiskĂĄren (pro zĂ­skĂĄnĂ­ vĆĄech vzdĂĄlenĂœch CUPS tiskĂĄren)"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
msgstr ""
+"Pokud je tato volba zvolena, pak je pƙi kaĆŸdĂ©m startu CUPS dĂ©mona "
+"automaticky zajiĆĄtěno ĆŸe\n"
"\n"
-"VarovĂĄnĂ­\n"
-"\n"
-"Pƙečtěte si prosím pozorně následující termíny. Pokud s nimi nesouhlasíte,\n"
-"nejste oprávněn pokračovat v instalaci následujícím CD. Stiskněte\n"
-"\"OdmĂ­tnout\" pro pokračovĂĄnĂ­ v instalaci bez tohoto mĂ©dia.\n"
-"\n"
+"- pokud je nainstalován LPD/LPRng, nebude CUPS pƙepisovat /etc/printcap\n"
"\n"
-"NěkterĂ© programy na dalĆĄĂ­m CD mĂ©diu nejsou ơíƙeny podle licence GPL či\n"
-"podobnĂ©. KaĆŸdĂœ z těchto programĆŻ je ơíƙen podle vlastnĂ­ licence a podmĂ­nek.\n"
-"Čtete pozorně tyto licence a podmĂ­nky pƙed tĂ­m, neĆŸ začnete danĂœ software\n"
-"pouĆŸĂ­vat nebo ơíƙit.\n"
-"NěkterĂ© licence zakazujĂ­ pƙenĂĄĆĄenĂ­, vytváƙenĂ­ duplikĂĄtĆŻ (mimo zĂĄloĆŸnĂ­ "
-"kopii),\n"
-"dalơí ơíƙení, dekompilaci, reverzní engineering nebo modifikaci komponent.\n"
-"KaĆŸdĂ© poruĆĄenĂ­ podmĂ­nek okamĆŸitě pƙeruĆĄuje vaĆĄe prĂĄva podle danĂ© licence.\n"
-"I kdyĆŸ danĂ© licence dĂĄvajĂ­ nějakĂĄ prĂĄva, nenĂ­ dovoleno instalovat danĂœ\n"
-"program na vĂ­ce systĂ©mĆŻ, pƙizpĆŻsobovat ho provozu na sĂ­ti. V pƙípadě\n"
-"pochybnostĂ­ kontaktujte distributora nebo vĂœrobce danĂ©ho programu.\n"
-"Pƙenechání práv tƙetím osobám nebo kopírování části komponent či\n"
-"dokumentace je také zakåzåno.\n"
+"- pokud chybí soubor /etc/cups/cupsd.conf, tak bude vytvoƙen\n"
"\n"
+"- pokud jsou rozesílány informace do sítě, nebudou obsahovat v názvu serveru "
+"\"localhost\".\n"
"\n"
-"VĆĄechna prĂĄva na programy na dalĆĄĂ­m CD mĂ©diu patƙí jejĂ­m prĂĄvoplatnĂœm\n"
-"vlastníkƯm podle autorského zåkona.\n"
+"Pokud některĂĄ volba zpĆŻsobuje problĂ©my, vypněte tuto volbu, ale potom si na "
+"tyto zmĂ­něnĂ© body musĂ­te dĂĄvat pozor."
-#: ../../install_messages.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
-"5. Governing Laws \n"
+"It also provides a much higher API than OSS.\n"
"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
msgstr ""
-"Úvod\n"
-"\n"
-"OperačnĂ­ systĂ©m a rĆŻznĂ© části dostupnĂ© v distribuci Mandrake Linux jsou "
-"nazĂœvĂĄny \"SoftwarovĂ© produkty\" (\"Software Products\"). SoftwarovĂ© "
-"produkty zahrnujĂ­, ale nejsou omezeny, na programy, metody, pravidla a "
-"dokumentaci, vztahujĂ­cĂ­ se k operačnĂ­mu systĂ©mu a dalĆĄĂ­m komponentĂĄm "
-"distribuce Mandrake Linux.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
+"OSS (Open Source Sound) bylo první API pro zvuk. Není to API nezåvislé na OS "
+"(je dostupnĂ© ve vĂ­ce unixovĂœch systĂ©mech), ale mĂĄ pouze zĂĄkladnĂ­ funkce a "
+"omezené API.\n"
+"A co vĂ­ce, vĆĄechny OSS ovladače \"vynalĂ©zajĂ­ znovu kolo\".\n"
"\n"
+"ALSA (Advanced Linux Sound Architecture) je modulĂĄrnĂ­ architektura, kterĂĄ "
+"kterĂĄ podporuje daleko vĂ­ce ISA, USB a PCI karet.\n"
"\n"
-"5. Governing Laws \n"
+"TakĂ© poskytuje daleko lepĆĄĂ­ API neĆŸ OSS.\n"
"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Začínám '%s'\n"
-
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Help"
-msgstr "Nápověda"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "not configured"
-msgstr "nenastaveno"
-
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
-#, c-format
-msgid "Configure"
-msgstr "Nastavit"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Go on anyway?"
-msgstr "Pƙesto pokračovat?"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "Stala se chyba pƙi instalaci balíčkƯ:"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Stala se chyba pƙi ƙazení balíčkƯ:"
+"Pokud chcete pouĆŸĂ­t alsa ovladače, mĆŻĆŸete pouĆŸĂ­t dva reĆŸimy:\n"
+"- starĆĄĂ­ reĆŸim kompatibility s OSS API\n"
+"- novĂ© ALSA API, kterĂ© poskytuje daleko vĂ­ce moĆŸnostĂ­, ale vyĆŸaduje pouĆŸĂ­t "
+"knihovnu ALSA.\n"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Change your Cd-Rom!\n"
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
+"You may prefer to replay the installation.\n"
msgstr ""
-"Vyměƈte prosím CD!\n"
-"\n"
-"ProsĂ­m vloĆŸte CD označenĂ© \"%s\" do mechaniky a stiskněte Ok.\n"
+"Instalace mĆŻĆŸe bĂœt v pƙípadě potƙeby plně automatickĂĄ,\n"
+"ale pouĆŸije se celĂœ disk!!!\n"
+"(v pƙípadě instalace na druhĂœ počítač)\n"
"\n"
-"Pokud toto CD nemáte, stiskněte Zruơit a toto CD nebude nainstalováno."
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Refuse"
-msgstr "OdmĂ­tnout"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Accept"
-msgstr "Pƙijmout"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Installing package %s"
-msgstr "Instaluji balíček %s"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "%d packages"
-msgstr "%d balíčkƯ(y)"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "No details"
-msgstr "Bez detailĆŻ"
+"Takto lze jednoduĆĄe zopakovat instalaci.\n"
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Details"
-msgstr "Detaily"
+msgid "Network printer \"%s\", port %s"
+msgstr "SĂ­Ć„ovĂĄ tiskĂĄrna \"%s\", port %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Čekejte prosím, pƙipravuji instalaci"
+msgid ""
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
+msgstr "ProsĂ­m zvolte si, ke kterĂ©mu sĂ­Ć„ovĂ©mu adaptĂ©ru bude pƙipojena LAN."
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Time remaining "
-msgstr "ZbĂœvajĂ­cĂ­ čas "
+msgid "OK to restore the other files."
+msgstr "Obnovit také ostatní soubory."
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Estimating"
-msgstr "Odhaduji"
+msgid "Please choose your keyboard layout."
+msgstr "Vyberte si rozloĆŸenĂ­ vaĆĄĂ­ klĂĄvesnice."
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Installing"
-msgstr "Instaluji"
+msgid "Printer Device URI"
+msgstr "URI TiskovĂ©ho ZaƙízenĂ­"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Vyberte si balíčky, kterĂ© chcete nainstalovat"
+msgid "Not erasable media!"
+msgstr "Toto nenĂ­ pƙepisovatelnĂ© mĂ©dium!"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Minimal install"
-msgstr "MinimĂĄlnĂ­ instalace"
+msgid "Terminal-based"
+msgstr "PomocĂ­ terminĂĄlu"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Updating package selection"
-msgstr "Aktualizuji vĂœběr balíčkĆŻ"
+msgid "Installing a printing system in the %s security level"
+msgstr "Instaluji tiskovĂœ systĂ©m v bezpečnostnĂ­ Ășrovni %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Load/Save on floppy"
-msgstr "UloĆŸit/NahrĂĄt na/z disketu/y"
+msgid "The user name is too long"
+msgstr "Toto uĆŸivatelskĂ© jmĂ©no je pƙíliĆĄ dlouhĂ©"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "<- Previous"
-msgstr "<- Zpět"
+msgid "Other OS (windows...)"
+msgstr "JinĂœ systĂ©m (Windows...)"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Install"
-msgstr "Instalace"
+msgid "WebDAV remote site already in sync!"
+msgstr "VzdĂĄlenĂĄ mĂ­sto je jiĆŸ protokolem WebDAV synchronizovĂĄno!"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Show automatically selected packages"
-msgstr "UkĂĄzat automaticky vybranĂ© balíčky"
+msgid "Reading printer database..."
+msgstr "Načítám databázi tiskáren ..."
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Tento balíček musĂ­ bĂœt obnoven, nemĆŻĆŸete ho nezvolit"
+msgid "Generate auto install floppy"
+msgstr "Vytvoƙit disketu pro automatickou instalaci"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
msgstr ""
-"Tento balíček musĂ­ bĂœt obnoven\n"
-"Jste si jisti, ĆŸe ho nechcete zvolit?"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "NemĆŻĆŸete od-označit tento balíček, protoĆŸe je uĆŸ nainstalovanĂœ"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Toto je nepostradatelnĂœ balíček, nemĆŻĆŸe bĂœt odstraněn"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't select/unselect this package"
-msgstr "NemĆŻĆŸete vybrat/nevybrat tento balíček"
+"\t\t uĆŸivatelskĂ© jmĂ©no: %s\n"
+"\t\t cesta: %s \n"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The following packages are going to be removed"
-msgstr "Tyto balíčky budou odebrány"
+msgid "Somalia"
+msgstr "SomĂĄlsko"
-#: ../../install_steps_gtk.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "The following packages are going to be installed"
-msgstr "Tyto balíčky budou instalovány"
+msgid "No open source driver"
+msgstr "NenĂ­ dostupnĂœ ĆŸĂĄdnĂœ open source ovladač"
-#: ../../install_steps_gtk.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"You can't select this package as there is not enough space left to install it"
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
msgstr ""
-"NemĆŻĆŸete označit tento balíček, protoĆŸe pro jeho instalaci nenĂ­ dost mĂ­sta"
+"Tato Ășroveƈ mĂĄ vlastnosti pƙedchozĂ­ Ășrovně, ale systĂ©m je Ășplně uzavƙen.\n"
+"Zabezpečení je nastaveno na maximum."
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Importance: %s\n"
-msgstr "DĆŻleĆŸitost: %s\n"
+msgid "Nicaragua"
+msgstr "Nikaragua"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Size: %d KB\n"
-msgstr "Velikost: %d kB\n"
+msgid "New Caledonia"
+msgstr "NovĂĄ Kaledonie"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Version: %s\n"
-msgstr "Verze: %s\n"
+msgid "European protocol (EDSS1)"
+msgstr "EvropskĂœ protokol (EDSS1)"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Name: %s\n"
-msgstr "Jméno: %s\n"
+msgid "Video mode"
+msgstr "TextovĂœ reĆŸim"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bad package"
-msgstr "Ć patnĂœ balíček"
+msgid "Please enter your email address below "
+msgstr "Zadejte prosĂ­m nĂ­ĆŸe svou poĆĄtovnĂ­ adresu "
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other"
-msgstr "DalĆĄĂ­"
+msgid "Oman"
+msgstr "OmĂĄn"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "CelkovĂĄ velikost: %d / %d MB"
+msgid "Network Monitoring"
+msgstr "Monitorování sítě"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Next ->"
-msgstr "DĂĄle ->"
+msgid "SunOS"
+msgstr "SunOs"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Individual package selection"
-msgstr "VĂœběr jednotlivĂœch balíčkĆŻ"
+msgid "New size in MB: "
+msgstr "NovĂĄ velikost v MB: "
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Package Group Selection"
-msgstr "VĂœběr skupiny balíčkĆŻ"
+msgid "Partition table type: %s\n"
+msgstr "Typ tabulky oddĂ­lĆŻ: %s\n"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"VĂĄĆĄ systĂ©m mĂĄ mĂĄlo systĂ©movĂœch prostƙedkĆŻ. Pƙi instalaci Mandrake Linuxu se\n"
-"mĆŻĆŸete setkat s rĆŻznĂœmi problĂ©my. Pokud se tak stane, zkuste textovou\n"
-"verzi instalačnĂ­ho programu. Ta se spouĆĄtĂ­ tak, ĆŸe pƙi startu\n"
-"z CD mechaniky stisknete 'F1' a poté napíƥete 'text'."
+msgid "Authentication Windows Domain"
+msgstr "DomĂ©na Windows pro ověƙenĂ­"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Save packages selection"
-msgstr "UloĆŸit vĂœběr jednotlivĂœch balíčkĆŻ"
+msgid "US keyboard"
+msgstr "US-Americké"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Automated"
-msgstr "Automaticky"
+msgid "Buttons emulation"
+msgstr "Emulace tlačítek"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Replay"
-msgstr "Zopakovat"
+msgid ", network printer \"%s\", port %s"
+msgstr ", sĂ­Ć„ovĂĄ tiskĂĄrna \"%s\", port %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
"\n"
-"You may prefer to replay the installation.\n"
+"Drakbackup activities via tape:\n"
+"\n"
msgstr ""
-"Instalace mĆŻĆŸe bĂœt v pƙípadě potƙeby plně automatickĂĄ,\n"
-"ale pouĆŸije se celĂœ disk!!!\n"
-"(v pƙípadě instalace na druhĂœ počítač)\n"
"\n"
-"Takto lze jednoduĆĄe zopakovat instalaci.\n"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Generate auto install floppy"
-msgstr "Vytvoƙit disketu pro automatickou instalaci"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Reboot"
-msgstr "Restartovat"
+"Aktivity programu DrakBackup skrze pĂĄsku:\n"
+"\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Some steps are not completed.\n"
"\n"
-"Do you really want to quit now?"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
msgstr ""
-"NěkterĂ© kroky nebyly dokončeny.\n"
"\n"
-"Chcete opravdu nyní skončit?"
+" ProblĂ©my FTP spojenĂ­: Nebylo moĆŸnĂ© poslat vaĆĄe soubory se zĂĄlohou pƙes "
+"FTP.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Creating auto install floppy..."
-msgstr "Vytváƙím disketu pro automatickou instalaci"
+msgid "Sending Speed:"
+msgstr "OdchozĂ­ rychlost:"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "VloĆŸte prĂĄzdnou disketu do %s"
+msgid "Halt bug"
+msgstr "Halt chyba"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"MĆŻĆŸete potƙebovat změnit startovacĂ­ zaƙízenĂ­ pro Open Firmware\n"
-" pro aktivaci spouơtěcího programu. Pokud nevidíte po spuơtění prompt,\n"
-" stiskněte pƙi startu Command-Option-O-F a zadejte:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Potom zadejte: shut-down\n"
-"Pƙi dalĆĄĂ­m spuĆĄtěnĂ­ uĆŸ uvidĂ­te prompt."
+msgid "Mail alert configuration"
+msgstr "NastavenĂ­ varovnĂœch zprĂĄv e-mailem"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Instalace zaváděcího programu neuspěla. Stala se tato chyba:"
+msgid "Tokelau"
+msgstr "Tokelau"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Installing bootloader"
-msgstr "Instaluji zaváděcí program"
+msgid "Bosnian"
+msgstr "Bosenské"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Stala se chyba pƙi instalaci aboot,\n"
-"mĂĄm se pokusit o instalaci i kdyĆŸ to zruĆĄĂ­ prvnĂ­ oddĂ­l na disku?"
+msgid "Release: "
+msgstr "Verze: "
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Do you want to use aboot?"
-msgstr "Chcete pouĆŸĂ­t aboot?"
+msgid "Connection speed"
+msgstr "Rychlost pƙipojení"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
msgstr ""
-"ZdĂĄ se, ĆŸe mĂĄte nějakĂœ neznĂĄmĂœ počítač,\n"
-"na kterém nebude Yaboot pracovat.\n"
-"Instalace bude pokračovat, ale budete\n"
-"potƙebovat BootX pro spuĆĄtěnĂ­ systĂ©mu."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Preparing bootloader..."
-msgstr "Pƙipravuji zaváděcí program"
+"Zadejte název vaơí vypalovačky CD\n"
+" napƙ.: 1,0,0"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Domain Admin Password"
-msgstr "Heslo Språvce domény"
+msgid "Namibia"
+msgstr "Namibie"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Domain Admin User Name"
-msgstr "UĆŸivatelskĂ© jmĂ©no SprĂĄvce domĂ©ny"
+msgid "Database Server"
+msgstr "Databåzové servery"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Windows Domain"
-msgstr "Doména Windows"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr ""
+"speciální schopnosti zaƙízení (schopnost vypalování a/nebo podpora DVD)"
-#: ../../install_steps_interactive.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Authentication Windows Domain"
-msgstr "DomĂ©na Windows pro ověƙenĂ­"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "NemĆŻĆŸu pƙidat oddĂ­l do _naformĂĄtovanĂ©ho_ RAID md%d"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"Aby toto správně pracovalo se serverem W2K PDC, bude muset správce serveru "
-"spustit: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" "
-"everyone / add a restartovat server.\n"
-"Budete takĂ© potƙebovat uĆŸivatelskĂ© jmĂ©no a heslo SprĂĄvce DomĂ©ny, abyste "
-"mohli pƙipojit počítač do domĂ©ny Windows(TM).\n"
-"JestliĆŸe jeĆĄtě nenĂ­ povolena sĂ­Ć„, aplikace DrakX se pokusĂ­ pƙipojit k domĂ©ně "
-"po fázi nastavení sítě.\n"
-"PakliĆŸe toto nastavenĂ­ z jakĂ©hokoli dĆŻvodu selĆŸe, a ověƙenĂ­ na PDC nebude "
-"pracovat sprĂĄvně, spusĆ„te po naběhnutĂ­ systĂ©mu 'smbpasswd -j DOMAIN -U USER%%"
-"PASSWORD' (pouĆŸijte svou domĂ©nu Windows(TM) a uĆŸivatelskĂ© jmĂ©no a heslo "
-"Språvce domény).\n"
-"Pƙíkaz 'wbinfo -t' otestuje, zda-li vaĆĄe tajnĂ© informace pro ověƙenĂ­ jsou "
-"språvné."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Server"
-msgstr "NIS Server"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Domain"
-msgstr "NIS Doména"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Authentication NIS"
-msgstr "Ověƙení pomocí NIS"
+"VaĆĄe karta podporuje 3D akceleraci, ale pouze s XFree %s,\n"
+"TOTO JE POUZE EXPERIMENTÁLNÍ VERZE, A MĆźĆœE VÉST K NESTABILITĚ SYSTÉMU.\n"
+"VaĆĄe karta je podporovĂĄna i v XFree %s, kde mĆŻĆŸe mĂ­t lepĆĄĂ­ podporu pro 2D."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "NIS"
-msgstr "NIS"
+msgid "Please wait, setting security options..."
+msgstr "Čekejte prosím, nastavuji volby zabezpečení..."
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "LDAP Server"
-msgstr "LDAP server"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr "NeznĂĄmĂĄ|CPH05X (bt878) [vĂ­ce dodavatelĆŻ]"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "LDAP Base dn"
-msgstr "ZĂĄkladnĂ­ dn pro LDAP"
+msgid "Launch the graphical environment when your system starts"
+msgstr "Spustit grafickĂ© prostƙedĂ­ pƙi startu systĂ©mu"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Authentication LDAP"
-msgstr "Ověƙení pomocí LDAP"
+msgid "hourly"
+msgstr "kaĆŸdou hodinu"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LDAP"
-msgstr "LDAP"
+msgid " Successfuly Restored on %s "
+msgstr " Ășspěơně obnovena na %s "
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Local files"
-msgstr "LokĂĄlnĂ­ soubory"
+msgid "Making printer port available for CUPS..."
+msgstr "Nastavuji tiskovĂœ port vyuĆŸitelnĂœ pro CUPS..."
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Authentication"
-msgstr "Ověƙení"
+msgid "Antigua and Barbuda"
+msgstr "Antigua a Barbuda"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr "Toto heslo je pƙíliĆĄ jednoduchĂ© (musĂ­ bĂœt alespoƈ %d znakĆŻ dlouhĂ©)"
+msgid ""
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
+msgstr ""
+"!!! Signalizuje, ĆŸe heslo v databĂĄzi je jinĂ© neĆŸ kterĂ© mĂĄ v databĂĄzi\n"
+"Terminal Server.\n"
+"SmaĆŸte/znovu pƙidejte uĆŸivatele pro povolenĂ­ pƙihlĂĄĆĄenĂ­ na Terminal Server."
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No password"
-msgstr "Bez hesla"
+msgid "Spanish"
+msgstr "Ć panělskĂ©"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Set root password"
-msgstr "HlavnĂ­(root) heslo"
+msgid "Start"
+msgstr "Start"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr "Nemáte nastaveno X. Opravdu je potƙebujete?"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
+msgstr ""
+"Argumenty: (arg)\n"
+"\n"
+" PovolĂ­/ZakĂĄĆŸe kontrolu na nastavenĂ­ promiskuitnĂ­ho reĆŸimu sĂ­Ć„ovĂ©ho rozhranĂ­."
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "SluĆŸby: aktivovĂĄno %d z %d registrovanĂœch"
+msgid "Configuring applications..."
+msgstr "NastavovĂĄnĂ­ aplikacĂ­..."
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Services"
-msgstr "SluĆŸby"
+msgid "Normal modem connection"
+msgstr "ModemovĂ© pƙipojenĂ­"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "System"
-msgstr "Systém"
+msgid "File Selection"
+msgstr "VĂœběr souboru"
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "%s on %s"
-msgstr "%s na %s"
+msgid ""
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+" tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+" standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
+msgstr ""
+"Kterou ISDN konfiguraci preferujete?\n"
+"\n"
+"* Starou, pouĆŸitou pro isd4net. Ta obsahuje vĂœkonnĂ© nĂĄstroje,\n"
+" ale je choulostivĂĄ na konfiguraci a nenĂ­ standardnĂ­.\n"
+"\n"
+"* Novou konfiguraci, snazơí pro porozumění, více standardní,\n"
+" ale s mĂ©ně nĂĄstroji.\n"
+"\n"
+"Doporučujeme vybrat si snazơí novou konfiguraci.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
-msgid "Bootloader"
-msgstr "Zaváděcí program"
+msgid "CUPS"
+msgstr "CUPS"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Boot"
-msgstr "Spuơtění"
+msgid "Run config tool"
+msgstr "Spustit nĂĄstroj pro nastavenĂ­"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "disabled"
-msgstr "vypnuto"
+msgid "Bootloader installation"
+msgstr "Instalace zaváděcího programu"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "activated"
-msgstr "aktivovĂĄno"
+msgid "Root partition size in MB: "
+msgstr "Velikost koƙenovĂ©ho oddĂ­lu v MB:"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Firewall"
-msgstr "Firewall"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "Toto je nepostradatelnĂœ balíček, nemĆŻĆŸe bĂœt odstraněn"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Security"
-msgstr "Bezpečnost"
+msgid "Etherboot ISO image is %s"
+msgstr "ISO image pro Etherboot je %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Security Level"
-msgstr "Úroveƈ zabezpečení"
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"named (BIND) je domĂ©novĂœ (DNS) server, kterĂœ pƙeklĂĄdĂĄ hostitelskĂĄ jmĂ©na na "
+"IP adresy."
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Network"
-msgstr "SĂ­Ć„"
+msgid "Disconnect..."
+msgstr "Odpojit..."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network & Internet"
-msgstr "SĂ­Ć„ & Internet"
+msgid "Saint Lucia"
+msgstr "SvatĂĄ Lucie"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Graphical interface"
-msgstr "Grafické rozhraní"
+msgid "Report"
+msgstr "HlĂĄĆĄenĂ­"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Hardware"
-msgstr "Hardware"
+msgid "Palau"
+msgstr "Palau"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "TV card"
-msgstr "TV karta"
+msgid "level"
+msgstr "Ășroveƈ"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
msgstr ""
-"Nebyla nalezena zvukovĂĄ karta. Zkuste spustit po instalaci \"harddrake\"."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr "Pro nastavení zvukové karty spusƄte po instalaci \"sndconfig\"."
+"VĆĄechny incidenty budou sledovĂĄny vyhrazenĂœm kvalifikovanĂœm technickĂœm "
+"expertem společnosti MandrakeSoft."
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "Máte nějakou zvukovou kartu na ISA sběrnici?"
+msgid "Package Group Selection"
+msgstr "VĂœběr skupiny balíčkĆŻ"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sound card"
-msgstr "ZvukovĂĄ karta"
+msgid "Restore Via Network Protocol: %s"
+msgstr "Obnovit pƙes sĂ­Ć„ pomocĂ­ protokolu: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Remote CUPS server"
-msgstr "VzdĂĄlenĂœ CUPS server"
+msgid "You can configure each parameter of the module here."
+msgstr "Zde mĆŻĆŸete nastavit kaĆŸdĂœ z parametrĆŻ modulu."
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "No printer"
-msgstr "Bez tiskĂĄrny"
+msgid "Choose the resolution and the color depth"
+msgstr "Vyberte si rozliĆĄenĂ­ a barevnou hloubku"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Printer"
-msgstr "TiskĂĄrna"
+msgid "Emulate third button?"
+msgstr "Emulovat tƙetí tlačítko?"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mouse"
-msgstr "MyĆĄ"
+msgid ""
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
+msgstr ""
+"NemĆŻĆŸete vytvoƙit novĂœ oddĂ­l\n"
+"(protoĆŸe jste jiĆŸ dosĂĄhli maximĂĄlnĂ­ho počtu primĂĄrnĂ­ch oddĂ­lĆŻ).\n"
+"Nejprve odstraƈte některĂœ primĂĄrnĂ­ oddĂ­l a vytvoƙte oddĂ­l rozơíƙenĂœ."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Timezone"
-msgstr "Časová zóna"
+msgid "Mount"
+msgstr "Pƙipojit"
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Keyboard"
-msgstr "KlĂĄvesnice"
+msgid "Creating auto install floppy"
+msgstr "Vytváƙím disketu pro automatickou instalaci"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Summary"
-msgstr "Souhrn"
+msgid "Install updates"
+msgstr "Aktualizace systému"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "NTP Server"
-msgstr "NTP Server"
+msgid "text box height"
+msgstr "vĂœĆĄka textovĂ©ho boxu"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatická synchronizace času (pomocí NTP)"
+msgid "State"
+msgstr "Status"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Hardwarové hodiny nastaveny na GMT"
+msgid "Be sure a media is present for the device %s"
+msgstr "Zkontrolujte, zda v je zaƙízenĂ­ %s vloĆŸeno mĂ©dium"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which is your timezone?"
-msgstr "JakĂ© je vaĆĄe časovĂ© pĂĄsmo?"
+msgid "Enable multiple profiles"
+msgstr "Povolit vĂ­ce profilĆŻ"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Would you like to try again?"
-msgstr "Chcete to zkusit znovu?"
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
+msgstr "Tato volba zazálohuje a obnoví vơechny soubory v adresáƙi /etc.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Nelze kontaktovat zrcadlo %s"
+msgid "Local printer"
+msgstr "MĂ­stnĂ­ tiskĂĄrna"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Stahuji ze zrcadla(mirror) seznam dostupnĂœch balíčkĆŻ"
+msgid "Files Restored..."
+msgstr "Soubory obnoveny..."
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Zvolte si zrcadlo (mirror) pro stahování balíčkƯ"
+msgid "Package selection"
+msgstr "VĂœběr balíčkĆŻ"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr "Kontaktuji web Mandrake Linux pro zĂ­skĂĄnĂ­ seznamu dostupnĂœch zrcadel"
+msgid "Mauritania"
+msgstr "MauretĂĄnie"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
"\n"
-"Do you want to install the updates ?"
msgstr ""
-"NynĂ­ mĂĄte moĆŸnost stĂĄhnout aktualizovanĂ© balíčky. Tyto balíčky byly\n"
-"uvolněny aĆŸ po vydĂĄnĂ­ distribuce. Mohou obsahovat bezpečnostnĂ­\n"
-"aktualizace nebo opravy chyb.\n"
+"Mohu zachovat současnĂ© nastavenĂ­ a pƙedpoklĂĄdat, ĆŸe mĂĄte jiĆŸ nastavenĂœ DHCP "
+"server; v takovĂ©m pƙípadě ověƙte, ĆŸe je sprĂĄvně pƙevzato nastavenĂ­ sĂ­tě "
+"odpovĂ­dajĂ­cĂ­ vaĆĄĂ­ lokĂĄlnĂ­ sĂ­ti; nebude v něm provedena ĆŸĂĄdnĂĄ změna a nebude "
+"ani změněno nastavení DHCP serveru.\n"
"\n"
-"Chcete-li získat tyto balíčky, musíte mít k dispozici funkční pƙipojení\n"
-"k Internetu.\n"
+"VĂœchozĂ­ zĂĄznam DNS je vyrovnĂĄvacĂ­ jmennĂœ server (caching nameserver) "
+"nastavenĂœ na vaĆĄem firewallu. Tento zĂĄznam lze nahradit napƙíklad IP adresou "
+"vaơeho poskytovatele pƙipojení k Internetu.\n"
+"\n"
+"Jinak mohu změnit jak rozhranĂ­, tak takĂ© pƙenastavit DHCP server podle "
+"potƙeby.\n"
"\n"
-"Chcete nainstalovat aktualizace?"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "VloĆŸte prosĂ­m disketu s moduly do %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "VloĆŸte prosĂ­m spouĆĄtěcĂ­ disketu do %s"
+msgid ""
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
+msgstr ""
+"Lokální tiskárna nenalezena! Pro ruční instalaci tiskárny zadejte název "
+"zaƙízení/souboru do políčka (Paralelní porty: /dev/lp0, /dev/lp1,... jsou "
+"ekvivalentnĂ­ LPT1:, LPT2:, ...,prvnĂ­ USB tiskĂĄrna: /dev/usb/lp0, druhĂĄ USB "
+"tiskĂĄrna: /dev/usb/lp1,...)."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Post-install configuration"
-msgstr "ProbĂ­hĂĄ nastavovĂĄnĂ­ po instalaci"
+msgid "All primary partitions are used"
+msgstr "VĆĄechny primĂĄrnĂ­ oddĂ­ly (partitions) jsou pouĆŸĂ­vĂĄny"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Installing package %s\n"
-"%d%%"
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
msgstr ""
-"Instaluji balíček %s\n"
-"%d%%"
+"Doporučujeme po tomto kroku restartovat X Window,\n"
+"aby se pƙedeĆĄlo problĂ©mĆŻm se změnou nĂĄzvu počítače."
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Preparing installation"
-msgstr "Pƙipravuji instalaci"
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr "Automatická detekce a konfigurace hardware pƙi spuơtění."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM označenĂ© \"%s\""
+msgid "Installation Server Configuration"
+msgstr "NastavenĂ­ pro instalaci serveru"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Pokud mĂĄte vĆĄechna CD vypsanĂĄ nĂ­ĆŸe, klepněte na Ok.\n"
-"Pokud nemĂĄte ĆŸĂĄdnĂ© z nich, klepněte na ZruĆĄit.\n"
-"Pokud VĂĄm chybĂ­ pouze některĂ© z nich, odznačte je, a zvolte Ok."
+msgid "Configuring IDE"
+msgstr "Nastavuji IDE"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "All"
-msgstr "VĆĄechno"
+msgid "Network functionality not configured"
+msgstr "SĂ­Ć„ nenĂ­ nastavena"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Opravdu minimální instalace (speciálně bez urpmi)"
+msgid "Configure module"
+msgstr "Nastavit modul"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Základní dokumentace (doporučeno!)"
+msgid "Cocos (Keeling) Islands"
+msgstr "Kokosové ostrovy (Keeling Islands)"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "With X"
-msgstr "X prostƙedí"
+msgid "Disconnecting from the Internet "
+msgstr "OdpojenĂ­ z Internetu "
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Nevybrali jste ĆŸĂĄdnou skupinu balíčkĆŻ\n"
-"Vyberte si prosím alespoƈ minimålní instalaci"
+msgid "You'll need to reboot before the modification can take place"
+msgstr "Aby se změny uplatnily budete muset restartovat počítač"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Type of install"
-msgstr "Typ instalace"
+msgid "Provider phone number"
+msgstr "Telefonní číslo poskytovatele"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Selected size is larger than available space"
-msgstr "Velikost vybranĂœch balíčkĆŻ je větĆĄĂ­ neĆŸ mĂ­sto na disku"
+msgid "Host %s"
+msgstr "Počítač %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "VloĆŸte disketu obsahujĂ­cĂ­ vĂœběr balíčkĆŻ"
+msgid "Armenia"
+msgstr "Arménie"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Loading from floppy"
-msgstr "NahrĂĄvĂĄm z diskety"
+msgid "Fiji"
+msgstr "FidĆŸi"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Package selection"
-msgstr "VĂœběr balíčkĆŻ"
+msgid ""
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
+msgstr ""
+"Argumenty: (délka, ndigits=0, nupper=0)\n"
+"\n"
+"NastavĂ­ minimĂĄlnĂ­ dĂ©lku hesla, minimĂĄlnĂ­ počet číslic a velkĂœch pĂ­smen v "
+"hesle."
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Save on floppy"
-msgstr "UloĆŸit na disketu"
+msgid "Second floppy drive"
+msgstr "druhé mechaniky"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Load from floppy"
-msgstr "NahrĂĄt z diskety"
+msgid "About Harddrake"
+msgstr "O aplikaci HardDrake"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Vyberte si, zda chcete uloĆŸit nebo nahrĂĄt vĂœběr balíčkĆŻ na disketu.\n"
-"FormĂĄt vĂœběru je stejnĂœ jako formĂĄt automaticky generovanĂ© diskety."
+msgid "Drive capacity"
+msgstr "Kapacita zaƙízení"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
msgstr ""
-"Na vaƥem systému není dostatek místa pro instalaci nebo aktualizaci (%d > %d)"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Looking for available packages..."
-msgstr "HledĂĄm dostupnĂ© balíčky"
+"VloĆŸte disketu do mechaniky\n"
+"VĆĄechna data na tĂ©to disketě budou smazĂĄna"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Vyhledávám balíčky pro aktualizaci"
+msgid "Size: %s"
+msgstr "Velikost: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Looking at packages already installed..."
-msgstr "ProhledĂĄvĂĄm jiĆŸ instalovanĂ© balíčky..."
+msgid "Control and Shift keys simultaneously"
+msgstr "Control a Shift současně"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "HledĂĄm dostupnĂ© balíčky a znovu sestavuji databĂĄzi balíčkĆŻ..."
+msgid "secondary"
+msgstr "sekundĂĄrnĂ­"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "NenĂ­ dostatek odklĂĄdacĂ­ho prostoru k instalaci, prosĂ­m pƙidejte nějakĂœ"
+msgid "View Backup Configuration."
+msgstr "Prohlédnout konfiguraci zålohy."
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
-msgstr ""
-"Selhala kontrola souborovĂ©ho systĂ©mu %s. Chcete opravit chyby? (pozor, mĆŻĆŸe "
-"dojít ke ztrátě dat)"
+msgid "if set to yes, report check result to syslog."
+msgstr "pokud je nastaveno, posĂ­lĂĄ vĂœstup kontroly do syslogu."
-#: ../../install_steps_interactive.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Check bad blocks?"
-msgstr "Otestovat na vadné stopy?"
+msgid "No password"
+msgstr "Bez hesla"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Zvolte diskové oddíly které chcete naformåtovat"
+msgid "Nigeria"
+msgstr "Nigérie"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Musíte restartovat počítač aby se projevily změny v tabulce oddílƯ"
+msgid "There is no existing partition to use"
+msgstr "NenĂ­ zde ĆŸĂĄdnĂœ existujĂ­cĂ­ oddĂ­l k pouĆŸitĂ­"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
msgstr ""
-"Pro bootstrap nenĂ­ potƙebnĂ© mĂ­sto o velikosti 1MB! Instalace mĆŻĆŸe pokračovat "
-"ale pro spuĆĄtěnĂ­ systĂ©mu musĂ­te vytvoƙit bootstrap oddĂ­l pomocĂ­ DiskDrake"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Choose the mount points"
-msgstr "Zvolte si pƙípojnĂ©(mount) body"
+"V tomto počítači jsou dostupnĂ© skenery\n"
+"\n"
+"%s\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "HledĂĄm oddĂ­ly, kterĂ© lze pƙipojit"
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
+msgstr ""
+"Abyste mohli tisknout na TCP nebo soketovĂ© tiskĂĄrně, musĂ­te zadat nĂĄzev nebo "
+"IP adresu tiskĂĄrny a volitelně i číslo portu (vĂœchozĂ­ je 9100). V pƙípadě "
+"serverĆŻ HP JetDirect je číslo portu obvykle 9100, u jinĂœch serverĆŻ mĆŻĆŸe bĂœt "
+"jiné. Podívejte se do manuålu k vaƥemu hardware."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No partition available"
-msgstr "Nejsou dostupnĂ© ĆŸĂĄdnĂ© diskovĂ© oddĂ­ly"
+msgid "Hard drive information"
+msgstr "Informace o pevném disku"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configuring IDE"
-msgstr "Nastavuji IDE"
+msgid "Russian"
+msgstr "Ruské"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "IDE"
-msgstr "IDE"
+msgid "Jordan"
+msgstr "JordĂĄn"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "Nastavuji PCMCIA karty..."
+msgid "Hide files"
+msgstr "Schovat soubory"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid "Auto-detect printers connected to this machine"
+msgstr "Automaticky nalĂ©zt tiskĂĄrny pƙipojenĂ© k tomuto počítači"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Button 3 Emulation"
-msgstr "Emulace 3 tlačítka"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgstr ""
+"Aplikace XawTV nenĂ­ nainstalovanĂĄ!\n"
+"\n"
+"\n"
+"Máte-li TV kartu a nástroj DrakX ji ani nerozpoznal (není pƙítomen\n"
+"modul bttv nebo saa7314 v \"/etc/modules\"), ani nenainstaloval\n"
+"aplikaci XawTV, poĆĄlete prosĂ­m vĂœsledek pƙíkazu\n"
+"\"lspcidrake -v -f\" na adresu \"install\\@mandrakesoft.com\"\n"
+"s pƙedmětem zprávy \"undetected TV card\".\n"
+"\n"
+"Tuto aplikaci mĆŻĆŸete doinstalovat pƙíkazem \"urpmi xawtv\" spuĆĄtěnĂœm \n"
+"v konzoli pod uĆŸivatelem root."
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Button 2 Emulation"
-msgstr "Emulace 2 tlačítka"
+msgid "Sorry, no floppy drive available"
+msgstr "BohuĆŸel nenĂ­ dostupnĂĄ ĆŸĂĄdnĂĄ disketovĂĄ mechanika"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Buttons emulation"
-msgstr "Emulace tlačítek"
+msgid "Bolivia"
+msgstr "BolĂ­vie"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Ke kterĂ©mu sĂ©riovĂ©mu portu je pƙipojena vaĆĄe myĆĄ?"
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
+"Nastavit na serveru s Windows tiskárnu, která bude pƙístupná pomocí IPP "
+"protokolu a nastavit tisk z tohoto počítače pomocí spojení \"%s\" v aplikaci "
+"PrinterDrake.\n"
+"\n"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Mouse Port"
-msgstr "Pƙipojení myơi"
+msgid "Bad package"
+msgstr "Ć patnĂœ balíček"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Please choose your type of mouse."
-msgstr "Vyberte si typ vaĆĄĂ­ myĆĄi."
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
+"VĂĄĆĄ počítač lze několika klepnutĂ­mi myĆĄi změnit na velmi vĂœkonnĂœ LinuxovĂœ "
+"server: webovĂœ server, poĆĄtovnĂ­ server, firewall, router, souborovĂœ a "
+"tiskovĂœ server, ..."
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Encryption key for %s"
-msgstr "Ơifrovací klíč pro %s"
+msgid "DrakSec Basic Options"
+msgstr "ZĂĄkladnĂ­ volby programu DrakSec"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Upgrade %s"
-msgstr "Aktualizace %s"
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program. Just type \"sndconfig\" in a console."
+msgstr ""
+"\n"
+"\n"
+"\n"
+"Pozn: Pokud mĂĄte PnP zvukovou kartu na ISA, pouĆŸijte program sndconfig. "
+"Spustíte ho pƙíkazem \"sndconfig\" v konzoli."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Je to instalace nebo aktualizace?"
+msgid "Romania"
+msgstr "Rumunsko"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Install/Upgrade"
-msgstr "Instalace/Aktualizace"
+msgid "choose device"
+msgstr "vyberte zaƙízení"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "Zde je kompletnĂ­ seznam dostupnĂœch klĂĄvesnic"
+msgid "Canada"
+msgstr "Kanada"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Vyberte si rozloĆŸenĂ­ vaĆĄĂ­ klĂĄvesnice."
+msgid "Remove from LVM"
+msgstr "Odebrat z LVMu"
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Quit"
-msgstr "Konec"
+msgid "Timezone"
+msgstr "Časová zóna"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "License agreement"
-msgstr "Souhlas s licencĂ­"
+msgid "German"
+msgstr "NěmeckĂ©"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "An error occurred"
-msgstr "Stala se chyba"
+msgid "Next ->"
+msgstr "DĂĄle ->"
-#: ../../install_steps_newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
msgstr ""
-" <Tab>/<Alt-Tab> pƙepn. mezi prvky | <Space> vĂœběr | <F12> dalĆĄĂ­ obraz."
+"Tato volba dovoluje tisk textovĂœch souborĆŻ v japonĆĄtině. PouĆŸijte tuto "
+"funkci pouze pokud opravdu potƙebujete tisknout v japonơtině, pokud je "
+"zvolena, nelze uĆŸ tisknout nĂĄrodnĂ­ znaky v latince a nelze nastavovat "
+"okraje, velikost fontĆŻ, atd. Toto nastavenĂ­ se tĂœkĂĄ pouze tiskĂĄren "
+"definovanĂœch na tomto počítači. Pokud chcete tisknout japonskĂ© texty na "
+"vzdĂĄlenĂ© tiskĂĄrně, musĂ­te tuto funkci aktivovat na vzdĂĄlenĂ©m počítači."
-#: ../../install_steps_newt.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Instalace %s"
+msgid ""
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
+msgstr ""
+"\n"
+"Tento oddĂ­l je oddĂ­l\n"
+"s ovladači, je lepơí\n"
+"no nechat neporuĆĄenĂœ.\n"
-#: ../../install_steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No floppy drive available"
-msgstr "NenĂ­ dostupnĂĄ ĆŸĂĄdnĂĄ disketovĂĄ mechanika"
+msgid "Guinea-Bissau"
+msgstr "Guinea-Bissau"
-#: ../../install_steps.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Welcome to %s"
-msgstr "VĂ­tĂĄ vĂĄs %s"
+msgid "Horizontal refresh rate"
+msgstr "Horizontální(ƙádková) synchronizace"
-#: ../../install_steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
msgstr ""
-"NěkterĂ© dĆŻleĆŸitĂ© balíčky nebyly sprĂĄvně nainstalovanĂ©.\n"
-"Je moĆŸnĂ©, ĆŸe je poĆĄkozen CD disk nebo CD-ROM mechanika.\n"
-"Zkontrolujete to pouĆŸitĂ­m pƙíkazu \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm:1
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "ZdvojenĂœ pƙípojnĂœ bod %s"
+"NemĆŻĆŸu smazat pƙípojnĂœ bod, protoĆŸe tento oddĂ­l je pouĆŸĂ­vĂĄn pro loopback.\n"
+"Odstraƈte nejprve loopback"
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
msgstr ""
-"Stala se chyba, ale nevím, jak jí správně interpretovat.\n"
-"Pokračujte na vlastní riziko."
-
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Please wait"
-msgstr "Prosím počkejte"
-
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
-#, c-format
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
-#, c-format
-msgid "Finish"
-msgstr "Ukončit"
+"NastavenĂ­ sĂ­tě provedenĂ© pƙi instalaci nelze nynĂ­ aktivovat. Zkontrolujte, "
+"zda je sĂ­Ć„ dostupnĂĄ po spuĆĄtěnĂ­ systĂ©mu a nastavenĂ­ opravte v ovlĂĄdacĂ­m "
+"centru Mandrake, v sekci \"SĂ­Ć„ a Internet\"/\"PƙipojenĂ­\" a nĂĄsledně "
+"nastavte tiskårnu také v ovlådacím centru v sekci \"Hardware\"/\"Tiskårna\""
-#: ../../interactive.pm:1 ../../standalone/draksec:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Basic"
-msgstr "ZĂĄkladnĂ­"
+msgid "USB controllers"
+msgstr "USB kontrolér"
-#: ../../interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Advanced"
-msgstr "Rozơíƙení"
+msgid "What norm is your TV using?"
+msgstr "Jakou normu vĂĄĆĄ televizor pouĆŸĂ­vĂĄ?"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Remove"
-msgstr "Odebrat"
+msgid "Type:"
+msgstr "Typ:"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Modify"
-msgstr "Změnit"
+msgid "Share name"
+msgstr "Sdílené jméno"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Add"
-msgstr "Pƙidat"
+msgid "enable"
+msgstr "povolit"
-#: ../../interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Choose a file"
-msgstr "Vyberte soubor"
+msgid ""
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
+msgstr "Kontaktuji web Mandrake Linux pro zĂ­skĂĄnĂ­ seznamu dostupnĂœch zrcadel"
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
msgstr ""
-"Zde mĆŻĆŸete vybrat klĂĄvesu nebo kombinaci klĂĄves, kterou\n"
-"budete moci pƙepĂ­nat rozloĆŸenĂ­ znakĆŻ vaĆĄĂ­ klĂĄvesnice.\n"
-"(napƙ. mezi českĂœm a americkĂœm)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "PravĂĄ klĂĄvesa \"Windows\""
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Left \"Windows\" key"
-msgstr "LevĂĄ klĂĄvesa \"Windows\""
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "\"Menu\" key"
-msgstr "KlĂĄvesa \"Menu\""
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt a Shift současně"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl a Alt současně"
+"Vyskytl se problĂ©m pƙi restartu sĂ­tě: \n"
+"\n"
+"%s"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "CapsLock key"
-msgstr "KlĂĄvesa CapsLock"
+msgid "Remove the loopback file?"
+msgstr "Odstranit soubor loopbacku?"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Control a Shift současně"
+msgid "Selected size is larger than available space"
+msgstr "Velikost vybranĂœch balíčkĆŻ je větĆĄĂ­ neĆŸ mĂ­sto na disku"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "Obě klávesy Shift současně"
+msgid "NCP server name missing!"
+msgstr "Chybí název pro sdílení pƙes NCP!"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Right Alt key"
-msgstr "PravĂĄ klĂĄvesa Alt"
+msgid "Please choose your country."
+msgstr "Vyberte si prosĂ­m svoji zem."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslåvské (latin)"
+msgid "Hard Disk Backup files..."
+msgstr "ZĂĄloĆŸnĂ­ soubory pevnĂ©ho disku..."
#: ../../keyboard.pm:1
#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamská \"číselná ƙada\" QWERTY"
+msgid "Laotian"
+msgstr "Laoské"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "US keyboard (international)"
-msgstr "US (mezinĂĄrodnĂ­)"
+msgid "Samoa"
+msgstr "Samoa"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "US keyboard"
-msgstr "US-Americké"
+msgid ""
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
+msgstr ""
+"Protokol rstat umoĆŸĆˆuje uĆŸivatelĆŻm sĂ­tě sledovat vytĂ­ĆŸenĂ­ jednotlivĂœch\n"
+"strojĆŻ pƙipojenĂœch k sĂ­ti."
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "UK keyboard"
-msgstr "UK-Britské"
+msgid "Re-generating list of configured scanners ..."
+msgstr "Znovu generuji seznam nastavenĂœch skenerĆŻ..."
-#: ../../keyboard.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Ukrainian"
-msgstr "Ukrajinské"
+msgid "Scanner"
+msgstr "Skener"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turecké (moderní model \"Q\")"
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr "VarovĂĄnĂ­: test na tĂ©to grafickĂ© kartě mĆŻĆŸe zpĆŻsobit zatuhnutĂ­ počítače"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "TureckĂ© (tradičnĂ­ model \"F\")"
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr "UĆŸivatelskĂ© jmĂ©no mĆŻĆŸe obsahovat pouze malĂĄ pĂ­smena, čísla, '-' a '_'"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Tajik keyboard"
-msgstr "TĂĄdĆŸickĂĄ klĂĄvesnice"
+msgid "Menudrake"
+msgstr "Menudrake"
-#: ../../keyboard.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Thai keyboard"
-msgstr "Thajské"
+msgid "Welcome To Crackers"
+msgstr "Dveƙe dokoƙán"
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "Tamilské (psací stroj)"
+msgid "Module options:"
+msgstr "Volby modulu:"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr "Tamilské (ISCII)"
+msgid "Secure your networks with the Multi Network Firewall"
+msgstr "Zabezpečte vaơe sítě s produktem Multi Network Firewall"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Serbian (cyrillic)"
-msgstr "Srbské (cyrilice)"
+msgid "Go on without configuring the network"
+msgstr "Pokračovat bez nastavení sítě"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Slovenské (QWERTY)"
+msgid "Abort"
+msgstr "Pƙeruơit"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovenské (QWERTZ)"
+msgid "No password prompt on %s at port %s"
+msgstr "ĆœĂĄdnĂĄ vĂœzva na heslo na %s na portu %s"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Slovenian"
-msgstr "Slovinské"
+msgid "Please check if you want to use the non-rewinding device."
+msgstr ""
+"Pokud chcete pouĆŸĂ­vat zaƙízenĂ­ bez zpětnĂ©ho pƙevĂ­jenĂ­, prosĂ­m zatrhněte."
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Swedish"
-msgstr "Ơvédské"
+msgid "Usage of remote scanners"
+msgstr "PouĆŸitĂ­ vzdĂĄlenĂœch skenerĆŻ"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Russian (Yawerty)"
-msgstr "Ruské (Yawerty)"
+msgid "\t-CDROM.\n"
+msgstr "\t-CDROM.\n"
-#: ../../keyboard.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Russian"
-msgstr "Ruské"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
+msgstr ""
+"VĂĄĆĄ diskovĂœ oddĂ­l s Windows je pƙíliĆĄ fragmentovĂĄn. Restartujte počítač do "
+"systĂ©mu Windows, pouĆŸijte program 'defrag' a potom spusĆ„te opět instalaci."
#: ../../keyboard.pm:1
#, c-format
-msgid "Romanian (qwerty)"
-msgstr "Rumunské (QWERTY)"
+msgid "Dvorak (Norwegian)"
+msgstr "Dvoƙák (NorskĂ©)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Romanian (qwertz)"
-msgstr "Rumunské (QWERTZ)"
+msgid "Hard Disk Backup Progress..."
+msgstr "PrĆŻběh zĂĄlohovĂĄnĂ­ na pevnĂœ disk... "
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Canadian (Quebec)"
-msgstr "Kanadské (Quebec)"
+msgid "Unable to fork: %s"
+msgstr "Nelze provést fork: %s"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Portuguese"
-msgstr "Portugalské"
+msgid "Type: "
+msgstr "Typ: "
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "PolskĂ© (rozloĆŸenĂ­ QWERTZ)"
+msgid "<-- Edit Client"
+msgstr "<-- Upravit klienta"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Polish (qwerty layout)"
-msgstr "PolskĂ© (rozloĆŸenĂ­ QWERTY)"
+msgid "no fonts found"
+msgstr "nebyly nalezeny ĆŸĂĄdnĂ© fonty"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Norwegian"
-msgstr "Norské"
+msgid "Mouse"
+msgstr "MyĆĄ"
-#: ../../keyboard.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Dutch"
-msgstr "Holandské"
+msgid "not enough room in /boot"
+msgstr "není dost místa v adresáƙi /boot"
-#: ../../keyboard.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Maltese (US)"
-msgstr "Maltézské (US)"
+msgid "Choosing an arbitratry driver"
+msgstr "VĂœběr libovolnĂ©ho ovladače"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Maltese (UK)"
-msgstr "Maltézské (UK)"
+msgid "Host name"
+msgstr "Název počítače"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Mongolské (cyrilice)"
+msgid "Liechtenstein"
+msgstr "LichtenĆĄtejnsko"
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Myanmar (Burmese)"
-msgstr "Myamarské (Burnské)"
+msgid "the color of the progress bar"
+msgstr "barva liơty s prƯběhem"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Macedonian"
-msgstr "Makedonské"
+msgid "Suppress Fonts Files"
+msgstr "Ignorovat soubory s fonty"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Malayalam"
-msgstr "Malayalam"
+msgid "Add to RAID"
+msgstr "Pƙidat do RAIDu"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Latvian"
-msgstr "Litevské"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
+"Pro Yaboot, pro dalĆĄĂ­ operačnĂ­ systĂ©my, pro alternativnĂ­ jĂĄdra nebo pro\n"
+"zĂĄchrannĂœ disk lze zde zadat dalĆĄĂ­ parametry.\n"
+"\n"
+"Pro jinĂ© OS je moĆŸnĂ© zadat pouze nĂĄzev a hlavnĂ­ oddĂ­l.\n"
+"\n"
+"Pro Linux je několik dalĆĄĂ­ch moĆŸnostĂ­:\n"
+"\n"
+" * Jmenovka: je to jednoduchĂœ nĂĄzev, kterĂ© mĆŻĆŸete napsat do pƙíkazovĂ©ho\n"
+"ƙádku pro Yaboot pro zvolenĂ­ danĂ©ho systĂ©mu.\n"
+"\n"
+" * Obraz: je to jméno jådra, ze kterého se spustí systém. Typicky je to "
+"vmlinux\n"
+"či obdoba slova vmlinux s pƙíponami.\n"
+"\n"
+" * Root: koƙenovĂ© zaƙízenĂ­ \"/\" pƙi instalaci Linuxu.\n"
+"\n"
+" * Pƙidat volby: na počítačích Apple potƙebuje jádro dalơí parametry, aby "
+"se\n"
+"správně nastavil hardware pro video, či provedla emulace tlačítek myơi\n"
+"na klĂĄvesnici, protoĆŸe myĆĄ u počítače Apple nemĂĄ druhĂ© a tƙetĂ­ tlačítko.\n"
+"Zde jsou nějakĂ© pƙíklady:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: tato volba je určena moduly, kterĂ© se musĂ­ nahrĂĄt do paměti "
+"jeơtě\n"
+"dƙíve, neĆŸ je pƙístupnĂœ spouĆĄtěcĂ­ oddĂ­l, či v pƙípadě opravy systĂ©mu.\n"
+"\n"
+" * Velikost initrd: vĂœchozĂ­ velikost ramdisku je 4,096 bytĆŻ. Pokud "
+"potƙebujete\n"
+"větơí velikost, zadejte sem potƙebnou hodnotu.\n"
+"\n"
+" * Read-write: bÄ›ĆŸně je \"root\" oddĂ­l pƙipojen nejdƙíve v reĆŸimu pouze pro\n"
+"čtenĂ­, aby se provedlo otestovĂĄnĂ­ systĂ©mu pƙed tĂ­m, neĆŸ se pouĆŸije pro běh.\n"
+"Zde je moĆŸnĂ© toto chovĂĄnĂ­ změnit.\n"
+"\n"
+" * Bez grafiky: grafickĂ© zaƙízenĂ­ na počítačích Apple je někdy "
+"problematické\n"
+"a tak je moĆŸnĂ© zadat tuto volbu a zvolit nativnĂ­ podporu.\n"
+"\n"
+" * VĂœchozĂ­: zvolĂ­ tuto poloĆŸku jako vĂœchozĂ­ pro vĂœběr z nabĂ­dky, kdy stačí\n"
+"pouze stisknout ENTER a spustĂ­ se. Tato poloĆŸka je označena \"*\" a vĆĄechny\n"
+"vĂœběry se zobrazĂ­ po stisknutĂ­ tlačítka [Tab]."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litevské \"foneticky\" QWERTY"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"TiskĂĄrna \"%s\" byla Ășspěơně pƙidĂĄna do Star Office/OpenOffice.org/GIMP."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "LitevskĂ© \"číselnĂĄ ƙada\" QWERTY"
+msgid "No floppy drive available!"
+msgstr "NenĂ­ dostupnĂĄ ĆŸĂĄdnĂĄ disketovĂĄ mechanika!"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litevské AZERTY (novå)"
+msgid ""
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
+msgstr ""
+"VĆĄechny moĆŸnosti dostupnĂ© pro současnou tiskĂĄrnu jsou vypsĂĄny nĂ­ĆŸe, nebo "
+"klepněte na tlačítko \"MoĆŸnosti tiskĂĄrny\".%s%s%s\n"
+"\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litevské AZERTY (starå)"
+msgid "Continue anyway?"
+msgstr "Pƙesto chcete pokračovat?"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Laotian"
-msgstr "Laoské"
+msgid ""
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
+msgstr ""
+"Pokud nenĂ­ tiskĂĄrna v seznamu, vyberte kompatibilnĂ­ nebo podobnĂœ model "
+"(podĂ­vejte se do manuĂĄlu)"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Latin American"
-msgstr "Latinsko-Americké"
+msgid "Printer"
+msgstr "TiskĂĄrna"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Korean keyboard"
-msgstr "KorejskĂĄ klĂĄvesnice"
+msgid "Saudi Arabia"
+msgstr "SaudskĂĄ ArĂĄbie"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Japanese 106 keys"
-msgstr "JaponskĂĄ 106 klĂĄves"
+msgid "Internet"
+msgstr "Internet"
-#: ../../keyboard.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Inuktitut"
-msgstr "Inuktitutské"
+msgid "Some devices were added:\n"
+msgstr "Byla pƙidána některá zaƙízení:\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Italian"
-msgstr "Italské"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "Geometrie: %s cylindrĆŻ, %s hlav, %s sektorĆŻ\n"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Icelandic"
-msgstr "Islandské"
+msgid "Printing on the printer \"%s\""
+msgstr "Tisknu na tiskĂĄrnu \"%s\""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Iranian"
-msgstr "ÍrĂĄnskĂ©"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr "/etc/hosts.allow a /etc/hosts.deny jsou jiĆŸ nastaveny - beze změn"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "Izraelské (foneticky)"
+msgid "Restore From Tape"
+msgstr "Obnovit z pĂĄsky"
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Israeli"
-msgstr "Izraelské"
+msgid "Choose the profile to configure"
+msgstr "Zvolte profil pro nastavenĂ­"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Croatian"
-msgstr "Chorvatské"
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
+msgstr ""
+"\n"
+"\n"
+"Pokud nechcete pouĆŸĂ­t vĂœchozĂ­ zvolenĂœ nĂĄzev,\n"
+"zadejte název počítače pro Zeroconf bez teček."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hungarian"
-msgstr "MaďarskĂ©"
+msgid "Backup Now from configuration file"
+msgstr "Zálohovat z konfiguračního souboru"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Gurmukhi"
-msgstr "Gurmutské"
+msgid "Mount points should contain only alphanumerical characters"
+msgstr "NĂĄzev pƙípojnĂ©ho bodu mĆŻĆŸe obsahovat pouze pĂ­smena a číslice"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Gujarati"
-msgstr "Gujartské"
+msgid "Restarting printing system..."
+msgstr "Restartuji tiskovĂœ systĂ©m ..."
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Greek"
-msgstr "Ƙecké"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
+msgstr ""
+"Argumenty: (jméno)\n"
+"\n"
+"PƙidĂĄ jmĂ©no k vĂœjimkĂĄm, kterĂ© se nekontrolujĂ­ na dobu platnosti pomocĂ­ msec."
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "GruzĂ­nskĂ© (rozloĆŸenĂ­ \"Latin\")"
+msgid "See hardware info"
+msgstr "UkĂĄzat informace o hardware"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "GruzĂ­nskĂ© (\"RuskĂ©\" rozloĆŸenĂ­)"
+msgid "First sector of boot partition"
+msgstr "PrvnĂ­ sektor zavĂĄděcĂ­ho diskovĂ©ho oddĂ­lu"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "French"
-msgstr "Francouzské"
+msgid "Printer manufacturer, model"
+msgstr "VĂœrobce tiskĂĄrny, model"
-#: ../../keyboard.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Finnish"
-msgstr "Finské"
+msgid "PDQ - Print, Don't Queue"
+msgstr "PDQ - Tisk bez uklĂĄdĂĄnĂ­ do fronty"
-#: ../../keyboard.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Spanish"
-msgstr "Ć panělskĂ©"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
+msgstr ""
+"[VOLBY]\n"
+"NastavenĂ­ pro Mandrake Terminal Server (MTS)\n"
+"--enable : povolĂ­ MTS\n"
+"--disable : zakĂĄĆŸe MTS\n"
+"--start : spustĂ­ MTS\n"
+"--stop : ukončí MTS\n"
+"--adduser : pƙidĂĄ existujĂ­cĂ­ho uĆŸivatele do MTS (vyĆŸaduje jmĂ©no "
+"uĆŸivatele)\n"
+"--deluser : odebere existujĂ­cĂ­ho uĆŸivatele z MTS (vyĆŸaduje jmĂ©no "
+"uĆŸivatele)\n"
+"--addclient : pƙidĂĄ klienta do MTS (vyĆŸaduje MAC adresu, IP, nĂĄzev nbi "
+"obrazu)\n"
+"--delclient : odebere klienta z MTS (vyĆŸaduje MAC address, IP, nĂĄzev "
+"nbi obrazu)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Estonian"
-msgstr "Estonské"
+msgid "Subnet Mask:"
+msgstr "Maska podsítě:"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvoƙák (Ć vĂ©dskĂ©) "
+msgid "LiLo and Bootsplash themes installation successfull"
+msgstr "Instalace tĂ©mat pro LiLo a Bootsplash provedena Ășspěơně!"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvoƙák (NorskĂ©)"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"Dva rozhodujĂ­cĂ­ parametry jsou: vertikĂĄlnĂ­ synchronizačnĂ­ frekvence, coĆŸ je\n"
+"frekvence, kterou je obnovovĂĄna celĂĄ obrazovka, a frekvence ƙádkovĂ©\n"
+" synchronizace (horiz. sync. rate), coĆŸ je frekvence jakou jsou zobrazovĂĄny\n"
+"jednotlivĂ© mikroƙádky (scanline).\n"
+"\n"
+"Je VELMI DĆźLEĆœITÉ abyste nezvolili typ monitoru se schopnostmi vyĆĄĆĄĂ­mi neĆŸ "
+"mĂĄ\n"
+"vĂĄĆĄ monitor, protoĆŸe byste si ho tĂ­m mohli poĆĄkodit. JestliĆŸe si nejste "
+"jistĂ­\n"
+"zvolte raději typ s niĆŸĆĄĂ­mi schopnostmi."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Dvorak (US)"
-msgstr "Dvoƙák (US) "
+msgid "Modify"
+msgstr "Změnit"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Danish"
-msgstr "Dånské"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
+"\n"
+"Pƙíkazy \"%s\" a \"%s\" dovolujĂ­ měnit volby pro kaĆŸdou tiskovou Ășlohu. "
+"JednoduĆĄe zadejte potƙebnĂ© nastavenĂ­ do pƙíkazovĂ© ƙádky, napƙ. \"%s <soubor>"
+"\".\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Devanagari"
-msgstr "Devanagari"
+msgid "Need hostname, username and password!"
+msgstr "Potƙebuji nĂĄzev počítače, uĆŸivatelskĂ© jmĂ©no a heslo!"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "German (no dead keys)"
-msgstr "NěmeckĂ© (bez mrtvĂœch klĂĄves)"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
+"WebDAV je protokol, kterĂœ umoĆŸĆˆuje pƙipojit webovĂœ adresáƙ jako lokĂĄlnĂ­, "
+"kterĂœ\n"
+"se potom tváƙí jako lokĂĄlnĂ­ souborovĂœ systĂ©m (takovĂœ webovĂœ server musĂ­ "
+"bĂœt)\n"
+"nastaven jako WebDAV server). Pokud chcete pƙidat WebDAV pƙipojení, vyberte\n"
+"poloĆŸku \"NovĂœ\"."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "German"
-msgstr "NěmeckĂ©"
+msgid "HardDrake"
+msgstr "HardDrake"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Czech (QWERTY)"
-msgstr "ČeskĂ© (QWERTY)"
+msgid "new"
+msgstr "novĂœ"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Czech (QWERTZ)"
-msgstr "ČeskĂ© (QWERTZ)"
+msgid "Would you like to try again?"
+msgstr "Chcete to zkusit znovu?"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Swiss (French layout)"
-msgstr "Ć vĂœcarskĂ© (FrancouzskĂœ styl)"
+msgid "Wizard"
+msgstr "PrĆŻvodce"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Swiss (German layout)"
-msgstr "Ć vĂœcarskĂ© (NěmeckĂœ styl)"
+msgid "Edit selected server"
+msgstr "Upravit vybranĂœ server"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belarusian"
-msgstr "BěloruskĂ©"
+msgid "Please choose where you want to backup"
+msgstr "Vyberte si, prosĂ­m, kam chcete zĂĄlohovat."
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bosnian"
-msgstr "Bosenské"
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr "Musíte restartovat počítač aby se projevily změny v tabulce oddílƯ"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazilské (ABNT-2)"
+msgid "Do not include the browser cache"
+msgstr "Nezahrnout cache prohlĂ­ĆŸeče"
-#: ../../keyboard.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Bulgarian (BDS)"
-msgstr "Bulharské (BDS)"
+msgid "Please, choose your keyboard layout."
+msgstr "JakĂ© je rozloĆŸenĂ­ vaĆĄĂ­ klĂĄvesnice?"
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "Bulharské (foneticky)"
+msgid "Standard"
+msgstr "StandardnĂ­"
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Bengali"
-msgstr "Bengålské"
+msgid "Please choose your mouse type."
+msgstr "Vyberte si typ vaĆĄi myĆĄi."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Belgian"
-msgstr "Belgické"
+msgid "Connect..."
+msgstr "Pƙipojit..."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "ÁzerbĂĄjdĆŸĂĄnskĂ© (latinka)"
+msgid "Failed to configure printer \"%s\"!"
+msgstr "NastavenĂ­ tiskĂĄrny \"%s\" selhalo!"
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Arabic"
-msgstr "Arabské"
+msgid "not configured"
+msgstr "nenastaveno"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Armenian (phonetic)"
-msgstr "Arménské (foneticky)"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Armenian (typewriter)"
-msgstr "Arménské (psací stroj)"
+msgid "About"
+msgstr "O aplikaci"
-#: ../../keyboard.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Armenian (old)"
-msgstr "Arménské (staré)"
+msgid "Proxies configuration"
+msgstr "NastavenĂ­ proxy"
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Albanian"
-msgstr "Albånské"
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Polish"
-msgstr "Polské"
+msgid "Start: sector %s\n"
+msgstr "Začátek: sektor %s\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Dvorak"
-msgstr "Dvoƙák"
+msgid "Network interface already configured"
+msgstr "SĂ­Ć„ovĂ© rozhranĂ­ je jiĆŸ nastaveno"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Zimbabwe"
-msgstr "Zimbabwe"
+msgid "Couldn't access the floppy!"
+msgstr "Nelze pracovat s disketou!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Zambia"
-msgstr "Zambie"
+msgid "connecting to Bugzilla wizard ..."
+msgstr "pƙipojuji se k prƯvodci Bugzilla ..."
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "South Africa"
-msgstr "JiĆŸnĂ­ Afrika"
+msgid "Mail Server"
+msgstr "PoĆĄtovnĂ­ server"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Serbia"
-msgstr "Srbsko"
+msgid "Please click on a partition"
+msgstr "Prosím klepněte na oddíl"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Mayotte"
-msgstr "Mayotte"
+msgid "Linux"
+msgstr "Linux"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Yemen"
-msgstr "Jemen"
+msgid "Have a nice day!"
+msgstr "Pƙeji hezkĂœ den!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Samoa"
-msgstr "Samoa"
+msgid "across Network"
+msgstr "pƙes sĂ­Ć„"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Wallis and Futuna"
-msgstr "Wallis a Futuna"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Vanuatu"
-msgstr "Vanuatu"
+msgid "Upgrade %s"
+msgstr "Aktualizace %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Vietnam"
-msgstr "Vietnam"
+msgid "Select Printer Connection"
+msgstr "Zvolte pƙipojení tiskárny"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Panenské ostrovy (U.S.)"
+msgid "Scanning for TV channels in progress ..."
+msgstr "ProbĂ­hĂĄ vyhledĂĄvĂĄnĂ­ TV kanĂĄlĆŻ ..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Virgin Islands (British)"
-msgstr "Panenské ostrovy (britské)"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
+"Chyba pƙi posílání souboru pƙes FTP.\n"
+" ProsĂ­m opravte vaĆĄe nastavenĂ­ FTP."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Venezuela"
-msgstr "Venezuela"
+msgid "IP Range Start:"
+msgstr "IP rozsah od:"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "Saint Vincent a Grenadiny"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"InternetovĂœ superserver dĂ©mon (nazĂœvanĂœ inetd) spouĆĄtĂ­ mnoho ostatnĂ­ch\n"
+"internetovĂœch sluĆŸeb, tak jak jsou zapotƙebĂ­. OdpovĂ­dĂĄ za start napƙ.\n"
+"telnetu, ftp, rsh a rlogin. Pokud vypnete inetd, vypnete tĂ­m i ostatnĂ­\n"
+"sluĆŸby kterĂ© spouĆĄtĂ­."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Vatican"
-msgstr "VatikĂĄn"
+msgid "the height of the progress bar"
+msgstr "vĂœĆĄka liĆĄty s prĆŻběhem"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Uzbekistan"
-msgstr "UzbekistĂĄn"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
+"\n"
+"- UloĆŸit skrze %s na počítač: %s\n"
-#: ../../lang.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Uruguay"
-msgstr "Uruguay"
+msgid "Argentina"
+msgstr "Argentina"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "Spojené ståty (Minor Outlying Islands)"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
+msgstr ""
+"Argumenty: (arg)\n"
+"\n"
+"Akceptuje/OdmĂ­tne vĆĄesměrovĂ© icmp echo."
-#: ../../lang.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Uganda"
-msgstr "Uganda"
+msgid "Domain Name Server"
+msgstr "DomĂ©novĂœ server"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Ukraine"
-msgstr "Ukrajina"
+msgid "Security Level:"
+msgstr "Úroveƈ zabezpečení:"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Tanzania"
-msgstr "Tanzanie"
+msgid "Mount points must begin with a leading /"
+msgstr "PƙípojnĂ© body (mount points) musĂ­ začínat '/'"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Taiwan"
-msgstr "Taiwan"
+msgid "Postfix Mail Server"
+msgstr "PoĆĄtovnĂ­ server Postfix"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Tuvalu"
-msgstr "Tuvalu"
+msgid "Quit without saving"
+msgstr "Konec bez uloĆŸenĂ­"
#: ../../lang.pm:1
#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Trinidad a Tobago"
+msgid "Yemen"
+msgstr "Jemen"
-#: ../../lang.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Turkey"
-msgstr "Turecko"
+msgid "This product is available on the MandrakeStore Web site."
+msgstr "Tento produkt je k dispozici na webovĂœch strĂĄnkĂĄch MandrakeStore."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Tonga"
-msgstr "Tonga"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr ""
+"Zadejte prosĂ­m maximĂĄlnĂ­ velikost\n"
+" povolenou pro DrakBackup"
-#: ../../lang.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Tunisia"
-msgstr "Tunisko"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr "=> Je zde vĂ­ce voleb, ze kterĂœch je moĆŸnĂ© si vybrat (%s).\n"
-#: ../../lang.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Turkmenistan"
-msgstr "TurkmenistĂĄn"
+msgid "Hard drive detection"
+msgstr "Detekce pevnĂœch diskĆŻ"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "East Timor"
-msgstr "VĂœchodnĂ­ Timor"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
+"Nevybrali jste ĆŸĂĄdnou skupinu balíčkĆŻ\n"
+"Vyberte si prosím alespoƈ minimålní instalaci"
-#: ../../lang.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Tokelau"
-msgstr "Tokelau"
+msgid "Please enter the WebDAV server URL"
+msgstr "Zadejte prosĂ­m URL serveru WebDAV"
#: ../../lang.pm:1
#, c-format
msgid "Tajikistan"
msgstr "TadĆŸikistĂĄn"
-#: ../../lang.pm:1
-#, c-format
-msgid "Thailand"
-msgstr "Thajsko"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Togo"
-msgstr "Togo"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "French Southern Territories"
-msgstr "FrancouzskĂĄ jiĆŸnĂ­ teritoria"
-
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Chad"
-msgstr "Čad"
+msgid "Accept"
+msgstr "Pƙijmout"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "Turks a Caicos Islands"
+msgid "Description"
+msgstr "Popis"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Swaziland"
-msgstr "Svazijsko"
+msgid "Error opening %s for writing: %s"
+msgstr "Chyba pƙi otevírání %s pro zápis: %s"
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Syria"
-msgstr "SĂœrie"
+msgid "Mouse type: %s\n"
+msgstr "Typ myĆĄi: %s\n"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "El Salvador"
-msgstr "El Salvador"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr "S XFree %s mĆŻĆŸe vaĆĄe karta vyuĆŸĂ­t 3D hardwarovĂ© akcelerace."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sao Tome and Principe"
-msgstr "Sao Tome a Principe"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "Vyberte velikost vaƥeho média CD/DVD"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Suriname"
-msgstr "Surinam"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
+msgstr ""
+"Argumenty: (arg)\n"
+"\n"
+"Povoluje su pouze členĆŻm skupiny wheel nebo povoluje su kaĆŸdĂ©mu uĆŸivateli."
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Somalia"
-msgstr "SomĂĄlsko"
+msgid "Expert Area"
+msgstr "ExpertnĂ­ nastavenĂ­"
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Senegal"
-msgstr "Senegal"
+msgid "Choose a monitor"
+msgstr "Zvolte typ monitoru"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "San Marino"
-msgstr "San Marino"
+msgid "Empty label not allowed"
+msgstr "Prázdná značka není povolena"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Sierra Leone"
-msgstr "Sierra Leone"
+msgid "Maltese (UK)"
+msgstr "Maltézské (UK)"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Slovakia"
-msgstr "Slovensko"
+msgid "I can't add any more partition"
+msgstr "NemĆŻĆŸu pƙidat ĆŸĂĄdnĂœ dalĆĄĂ­ oddĂ­l"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Svalbard a Jan Mayen Islands"
+msgid "Size in MB: "
+msgstr "Velikost v MB: "
-#: ../../lang.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Slovenia"
-msgstr "Slovinsko"
+msgid "Remote printer"
+msgstr "VzdĂĄlenĂĄ tiskĂĄrna"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Saint Helena"
-msgstr "SvatĂĄ Helena"
+msgid "Please choose a language to use."
+msgstr "ProsĂ­m zvolte si jazyk, kterĂœ chcete pouĆŸĂ­vat."
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Singapore"
-msgstr "Singapur"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
+"VAROVÁNÍ: Toto zaƙízenĂ­ jiĆŸ bylo nastaveno pro pƙipojenĂ­ k Internetu.\n"
+"Klepněte na Ok pro zachování nastavení.\n"
+"Modifikace nĂĄsledujĂ­cĂ­ch poloĆŸek pƙepĂ­ĆĄe toto nastavenĂ­."
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Sudan"
-msgstr "SĂșdĂĄn"
+msgid "I can set up your computer to automatically log on one user."
+msgstr ""
+"MĆŻĆŸu nastavit vĂĄĆĄ počítač tak, aby automaticky pƙihlĂĄsil vybranĂ©ho uĆŸivatele."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Seychelles"
-msgstr "Seychely"
+msgid "Floppy format"
+msgstr "FormĂĄty pro diskety"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Solomon Islands"
-msgstr "Solomon Islands"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Saudi Arabia"
-msgstr "SaudskĂĄ ArĂĄbie"
+msgid "Generic Printers"
+msgstr "Obecné tiskårny"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Rwanda"
-msgstr "Rwanda"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
+msgstr ""
+"Vyberte si tiskĂĄrnu, na kterou budou směrovĂĄny tiskovĂ© Ășlohy nebo zadejte do "
+"políčka název zaƙízení/název souboru"
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Russia"
-msgstr "Rusko"
+msgid "The scanners on this machine are available to other computers"
+msgstr "Skenery na tomto počítači jsou pƙístupnĂ© i pro vzdĂĄlenĂ© počítače"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Romania"
-msgstr "Rumunsko"
+msgid "First sector of the root partition"
+msgstr "PrvnĂ­ sektor koƙenovĂ©ho oddĂ­lu"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Reunion"
-msgstr "Reunion"
+msgid "Alternative drivers"
+msgstr "Alternativní ovladače"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Qatar"
-msgstr "Katar"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
+"\n"
+"Zvolte prosĂ­m vĆĄechny volby, kterĂ© potƙebujete.\n"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Palau"
-msgstr "Palau"
+msgid "Initrd"
+msgstr "Initrd"
#: ../../lang.pm:1
#, c-format
-msgid "Paraguay"
-msgstr "Paraguay"
+msgid "Cape Verde"
+msgstr "Cape Verde"
-#: ../../lang.pm:1
-#, c-format
-msgid "Portugal"
-msgstr "Portugalsko"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr "Zda má cpu chybu čárky Cyrix 6x86"
-#: ../../lang.pm:1
-#, c-format
-msgid "Palestine"
-msgstr "Palestina"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr ""
+"PrvnĂ­ verze procesorĆŻ Pentium byly chybovĂ© a zpĆŻsobovaly zatuhnutĂ­ pƙi "
+"dekĂłdovĂĄnĂ­ instrukce F00F"
#: ../../lang.pm:1
#, c-format
-msgid "Puerto Rico"
-msgstr "Puerto Rico"
+msgid "Guam"
+msgstr "Guam"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pitcairn"
-msgstr "Pitcairn"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
+msgstr ""
+"Vyberte si port, ke kterĂ©mu je tiskĂĄrna pƙipojena nebo zadejte do políčka "
+"název zaƙízení/název souboru"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "Saint Pierre a Miquelon"
+msgid "/Options/Test"
+msgstr "/Volby/Test"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Poland"
-msgstr "Polsko"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+"Tato Ășroveƈ musĂ­ bĂœt pouĆŸita s rozmyslem. Sice mĆŻĆŸete snadněji pouĆŸĂ­vat "
+"svĆŻj\n"
+"systĂ©m, ale na druhou stranu je velmi citlivĂœ: NesmĂ­ bĂœt pouĆŸit pro\n"
+"počítač pƙipojenĂœ k Internetu. Pro pƙihlĂĄĆĄenĂ­ nenĂ­ zapotƙebĂ­ ĆŸĂĄdnĂ© heslo."
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Pakistan"
-msgstr "PĂĄkistĂĄn"
+msgid "Mounting partition %s"
+msgstr "Pƙipojuji oddíl %s"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Philippines"
-msgstr "FilipĂ­ny"
+msgid "User name"
+msgstr "UĆŸivatelskĂ© jmĂ©no"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Papua New Guinea"
-msgstr "Papua NovĂĄ Guinea"
+msgid "New configuration (isdn-light)"
+msgstr "NovĂĄ konfigurace (isdn-light)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "French Polynesia"
-msgstr "Francouzskå Polynésie"
+msgid "Userdrake"
+msgstr "UserDrake"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Peru"
-msgstr "Peru"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "KterĂœ diskovĂœ oddĂ­l chcete pouĆŸĂ­t pro Linux4Win?"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Panama"
-msgstr "Panama"
+msgid "Backup system"
+msgstr "Zålohovat systém"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Oman"
-msgstr "OmĂĄn"
+msgid "Test pages"
+msgstr "TestovacĂ­ strĂĄnka"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "New Zealand"
-msgstr "NovĂœ ZĂ©land"
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
+"Seznam dat pro obnovenĂ­:\n"
+"\n"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Niue"
-msgstr "Niue"
+msgid "Checking %s"
+msgstr "Kontroluji %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Nauru"
-msgstr "Nauru"
+msgid "TCP/Socket Printer Options"
+msgstr "MoĆŸnosti tiskĂĄrny pro TCP/Socket"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Nepal"
-msgstr "NepĂĄl"
+msgid "Card mem (DMA)"
+msgstr "DMA karty"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Nicaragua"
-msgstr "Nikaragua"
+msgid "France"
+msgstr "Francie"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Nigeria"
-msgstr "Nigérie"
+msgid "browse"
+msgstr "prochĂĄzet"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Norfolk Island"
-msgstr "Norfolk Island"
+msgid "Checking installed software..."
+msgstr "OvěƙujĂ­ nainstalovanĂœ software..."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Niger"
-msgstr "Niger"
+msgid "Remote printer name missing!"
+msgstr "Chybí nåzev vzdålené tiskårny!"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New Caledonia"
-msgstr "NovĂĄ Kaledonie"
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "Chcete povolit tisk na tiskĂĄrnĂĄch v lokĂĄlnĂ­ sĂ­ti?\n"
#: ../../lang.pm:1
#, c-format
-msgid "Namibia"
-msgstr "Namibie"
+msgid "Turkey"
+msgstr "Turecko"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Mozambique"
-msgstr "Mosambik"
+msgid "Alcatel speedtouch usb"
+msgstr "Alcatel speedtouch USB"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Malaysia"
-msgstr "Malajsie"
+msgid "Number of buttons"
+msgstr "Počet tlačítek"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Mexico"
-msgstr "Mexiko"
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Vietnamská \"číselná ƙada\" QWERTY"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Malawi"
-msgstr "Malawi"
+msgid "Module"
+msgstr "Modul"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Maldives"
-msgstr "Maledivy"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
+msgstr ""
+"TiskovĂ© fronty, kterĂ© nebyly vytvoƙeny tĂ­mto programem nebo pƙes \"foomatic-"
+"configure\" nelze pƙenĂ©st."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mauritius"
-msgstr "Mauritius"
+msgid "Hardware"
+msgstr "Hardware"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Malta"
-msgstr "Malta"
+msgid "Ctrl and Alt keys simultaneously"
+msgstr "Ctrl a Alt současně"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Montserrat"
-msgstr "Montserrat"
+msgid "United States"
+msgstr "Spojené ståty americké"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mauritania"
-msgstr "MauretĂĄnie"
+msgid "Default OS?"
+msgstr "VĂœchozĂ­ OS?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Martinique"
-msgstr "Martinique"
+msgid "Swiss (German layout)"
+msgstr "Ć vĂœcarskĂ© (NěmeckĂœ styl)"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Northern Mariana Islands"
-msgstr "Northern Mariana Islands"
+msgid "Configure all heads independently"
+msgstr "Konfigurovat vĆĄechny monitory nezĂĄvisle"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mongolia"
-msgstr "Mongolsko"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr ""
+"Vyberte si tiskárnu, kterou chcete nastavit. Konfigurace těchto tiskáren je "
+"plně automatická. Pokud nebyla tiskárna správně detekována nebo preferujete "
+"vlastní nastavení tisku, zvolte \"Ruční konfigurace\"."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Myanmar"
-msgstr "Myanmar"
+msgid "NTP Server"
+msgstr "NTP Server"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Mali"
-msgstr "Mali"
+msgid "Load/Save on floppy"
+msgstr "UloĆŸit/NahrĂĄt na/z disketu/y"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Macedonia"
-msgstr "Makedonie"
+msgid "This theme does not yet have a bootsplash in %s !"
+msgstr "Toto tĂ©ma nemĂĄ jeĆĄtě ĆŸĂĄdnĂœ bootsplash v %s !"
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Marshall Islands"
-msgstr "Marshall Islands"
+msgid "nice"
+msgstr "nedĆŻleĆŸitĂ©"
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Madagascar"
-msgstr "Madagaskar"
+msgid "Leaving in %d seconds"
+msgstr "Test skončí za %d sekund"
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Moldova"
-msgstr "Moldava"
+msgid "Please choose which serial port your modem is connected to."
+msgstr "Ke kterĂ©mu sĂ©riovĂ©mu portu je vĂĄĆĄ modem pƙipojen?"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Monaco"
-msgstr "Monako"
+msgid "Country"
+msgstr "Země"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Morocco"
-msgstr "Maroko"
+msgid "Property"
+msgstr "Vlastnost"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Libya"
-msgstr "Libye"
+msgid "Ghostscript"
+msgstr "Ghostscript"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Latvia"
-msgstr "LotyĆĄsko"
+msgid "LAN Configuration"
+msgstr "NastavenĂ­ LAN"
#: ../../lang.pm:1
#, c-format
-msgid "Luxembourg"
-msgstr "Lucembursko"
+msgid "Ghana"
+msgstr "Ghana"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lithuania"
-msgstr "Litva"
+msgid "Path or Module required"
+msgstr "VyĆŸadovĂĄna cesta nebo modul"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Lesotho"
-msgstr "Lesotho"
+msgid "Advanced Options"
+msgstr "RozơíƙenĂ© volby"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Liberia"
-msgstr "Libérie"
+msgid "Coma bug"
+msgstr "Chyba čárky"
-#: ../../lang.pm:1
-#, c-format
-msgid "Sri Lanka"
-msgstr "SrĂ­ Lanka"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
+"V tĂ©to chvĂ­li je potƙeba určit, kterĂœ(Ă©) oddĂ­l(y) budou pouĆŸity pro "
+"instalaci\n"
+"systĂ©mu Mandrake Linux. Pokud byly oddĂ­ly jiĆŸ jednou definovĂĄny, buď\n"
+"z pƙedchozĂ­ instalace GNU/Linux nebo jinĂœm programem na rozdělenĂ­ disku,\n"
+"je moĆŸnĂ© pouĆŸĂ­t prĂĄvě tyto oddĂ­ly. Jinak musĂ­ bĂœt oddĂ­ly nově definovĂĄny.\n"
+"\n"
+"Pro vytvoƙenĂ­ oddĂ­lu musĂ­te nejdƙíve vybrat pevnĂœ disk. Klepněte na \n"
+"\"hda\", coĆŸ je prvnĂ­ IDE disk, nebo na \"hdb\", coĆŸ je druhĂœ disk,\n"
+"pƙípadně na \"sda\", coĆŸ je prvnĂ­ SCSI disk.\n"
+"\n"
+"Pro rozdělenĂ­ vybranĂ©ho disku mĆŻĆŸete pouĆŸĂ­t tyto volby:\n"
+"\n"
+" * \"VĆĄe smazat\": tato volba smaĆŸe vĆĄechny oddĂ­ly na disku.\n"
+"\n"
+" * \"Automaticky rozmĂ­stit\": dojde k automatickĂ©mu vytvoƙenĂ­ oddĂ­lu pro\n"
+"Ext2 a swap ve volném prostoru disku.\n"
+"\n"
+" * \"VĂ­ce\": nabĂ­dne dalĆĄĂ­ moĆŸnosti:\n"
+"\n"
+" * \"UloĆŸit tabulku oddĂ­lĆŻ\": uloĆŸĂ­ tabulku oddĂ­lĆŻ na disketu. To je\n"
+"vhodnĂ© pro pƙípad poĆĄkozenĂ­ tabulky, kdy ji lze z tĂ©to zĂĄlohy obnovit.\n"
+"Doporučujeme vyuĆŸĂ­t tuto moĆŸnost.\n"
+"\n"
+" * \"Obnovit tabulku oddĂ­lĆŻ\": obnovĂ­ tabulku oddĂ­lĆŻ, kterĂĄ byla jiĆŸ "
+"dƙíve\n"
+"uloĆŸena na disketu.\n"
+"\n"
+" * \"ZĂĄchrana tabulky oddĂ­lĆŻ\": pokud je tabulka poĆĄkozena, mĆŻĆŸete se\n"
+"pokusit ji opravit. Buďte ale opatrnĂ­ a pamatujte na to, ĆŸe se to nemusĂ­ "
+"vĆŸdy\n"
+"podaƙit.\n"
+"\n"
+" * \"Znovu načíst tabulku oddílƯ\": zruơí vơechny změny a nahraje pƯvodní\n"
+"tabulku oddĂ­lĆŻ.\n"
+"\n"
+" \"AutomatickĂ© pƙipojovĂĄnĂ­ pro vyjĂ­matelnĂĄ mĂ©dia\": odznačenĂ­ tĂ©to volby\n"
+"zpĆŻsobĂ­, ĆŸe pƙi pƙipojovĂĄnĂ­ a odpojovĂĄnĂ­ vyjĂ­matelnĂœch mĂ©diĂ­ jako jsou CD-"
+"ROM\n"
+"disky a floppy disky je nutnĂ© pouĆŸĂ­t ručně pƙíkaz mount.\n"
+"\n"
+" * \"PrĆŻvodce\": pokud nemĂĄte dobrĂ© znalosti o rozdělovĂĄnĂ­ diskĆŻ, pouĆŸijte\n"
+"tuto volbu, kdy se spustĂ­ prĆŻvodce. Doporučujeme, pokud nemĂĄte dobrĂ© "
+"znalosti\n"
+"o vytváƙení oddílƯ na disku.\n"
+"\n"
+" * \"Odvolat\": zruĆĄĂ­ vĆĄechny provedenĂ© změny.\n"
+"\n"
+" * \"Pƙepnout normĂĄlnĂ­/expertnĂ­ reĆŸim\": dovoluje dalĆĄĂ­ akce s oddĂ­ly\n"
+"(typ oddĂ­lu, volby, formĂĄtovĂĄnĂ­) a zobrazĂ­ dalĆĄĂ­ informace.\n"
+"\n"
+" * \"Hotovo\": pokud mĂĄte disk rozdělen, uloĆŸĂ­ se změny na disk.\n"
+"\n"
+"Pokud definujete velikost oddĂ­lu, mĆŻĆŸete pƙesněji jejich velikost určit "
+"pomocĂ­\n"
+"kurzorovĂœch ĆĄipek na klĂĄvesnici.\n"
+"\n"
+"PoznĂĄmka: kaĆŸdou volbu je moĆŸnĂ© zadat takĂ© z klĂĄvesnice. Mezi oddĂ­ly se\n"
+"mĆŻĆŸete pohybovat pomocĂ­ klĂĄves [Tab] a [Ć ipka nahoru/ĆĄipka dolĆŻ].\n"
+"\n"
+"Pokud je vybrĂĄn oddĂ­l, lze pouĆŸĂ­t tyto volby:\n"
+"\n"
+" * Ctrl-c pro vytvoƙenĂ­ novĂ©ho oddĂ­lu (pokud je vybrĂĄn prĂĄzdnĂœ oddĂ­l);\n"
+"\n"
+" * Ctrl-d pro smazĂĄnĂ­ oddĂ­lu;\n"
+"\n"
+" * Ctrl-m pro zadání bodu pƙipojení.\n"
+"\n"
+"VĂ­ce informacĂ­ o jednotlivĂœch druzĂ­ch souborovĂœch systĂ©mĆŻ naleznete\n"
+"v kapitole o ext2fs v \"Referenční pƙíručce\".\n"
+"\n"
+"Pokud instalujete na počítač PPC, je potƙeba vytvoƙit malĂœ oddĂ­l HFS,\n"
+"tzv. \"bootstrap\" o minimĂĄlnĂ­ velikosti 1MB, kterĂœ bude pouĆŸit pro zavaděč\n"
+"Yaboot. Pokud vytvoƙíte tento oddĂ­l větĆĄĂ­, napƙ. 50 MB, je to dobrĂ© mĂ­sto "
+"pro\n"
+"uloĆŸenĂ­ ramdisku a jĂĄdra pro situace zĂĄchrany disku."
-#: ../../lang.pm:1
-#, c-format
-msgid "Liechtenstein"
-msgstr "LichtenĆĄtejnsko"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
+"GrafickĂĄ karta\n"
+"\n"
+" Instalační program je schopen automaticky detekovat a nastavit grafickou\n"
+"kartu instalovanou v počítači. Pokud se to nepodaƙí, mĂĄte moĆŸnost si ze\n"
+"seznamu vybrat pƙísluơnou grafickou kartu ručně.\n"
+"\n"
+" V pƙípadě, ĆŸe pro vaĆĄi kartu je moĆŸnĂ© pouĆŸĂ­t vĂ­ce rĆŻznĂœch serverĆŻ, s 3D\n"
+"akceleracĂ­ nebo bez, je pouze na vĂĄs, kterĂœ server si vyberete jako nejvĂ­ce\n"
+"vyhovující vaơim potƙebám."
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Saint Lucia"
-msgstr "SvatĂĄ Lucie"
+msgid "There was an error installing packages:"
+msgstr "Stala se chyba pƙi instalaci balíčkƯ:"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lebanon"
-msgstr "Libanon"
+msgid "Lexmark inkjet configuration"
+msgstr "Nastavení inkoustové tiskårny Lexmark"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Laos"
-msgstr "Laos"
+msgid "Undo"
+msgstr "Zpět"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Kazakhstan"
-msgstr "KazachstĂĄn"
+msgid "Save partition table"
+msgstr "UloĆŸit tabulku oddĂ­lĆŻ"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Cayman Islands"
-msgstr "Kajmanské ostrovy"
+msgid "Finnish"
+msgstr "Finské"
#: ../../lang.pm:1
#, c-format
-msgid "Kuwait"
-msgstr "Kuvajt"
+msgid "Macedonia"
+msgstr "Makedonie"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Korea"
-msgstr "Korea"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
+"SdĂ­lenĂ­ mezi uĆŸivateli pouĆŸĂ­vĂĄ skupinu \"fileshare\". \n"
+"UĆŸivatele lze do tĂ©to skupiny pƙidat pomocĂ­ nĂĄstroje UserDrake."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Korea (North)"
-msgstr "Korea (SevernĂ­)"
+msgid "Slovenian"
+msgstr "Slovinské"
#: ../../lang.pm:1
#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "Saint Kitts a Nevis"
+msgid "Libya"
+msgstr "Libye"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Comoros"
-msgstr "Comoros"
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr "Nastavuji skripty, instaluji software, startuji servery..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Kiribati"
-msgstr "Kiribati"
+msgid ""
+"\n"
+"- Burn to CD"
+msgstr ""
+"\n"
+"- VypĂĄlit na CD"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Cambodia"
-msgstr "KambodĆŸa"
+msgid "Table"
+msgstr "Tabulka"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Kyrgyzstan"
-msgstr "KyrgyzstĂĄn"
+msgid "I don't know how to format %s in type %s"
+msgstr "nevĂ­m jak naformĂĄtovat %s na typ %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Kenya"
-msgstr "Keƈa"
+msgid "Model"
+msgstr "Model"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Japan"
-msgstr "Japonsko"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
+msgstr ""
+"Argumenty: (arg)\n"
+"\n"
+" PovolĂ­/ZakĂĄĆŸe pouĆŸitĂ­ knihovny libsafe, pokud je na systĂ©mu nalezena."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Jordan"
-msgstr "JordĂĄn"
+msgid "Stop Server"
+msgstr "Zastavit server"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Jamaica"
-msgstr "Jamajka"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
+msgstr ""
+"\n"
+"Vyberte téma pro\n"
+"LiLo a Bootsplash,\n"
+"mĆŻĆŸete je vybrat\n"
+"kaĆŸdĂ© zvlĂĄĆĄĆ„"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Iceland"
-msgstr "Island"
+msgid "Modem"
+msgstr "Modem"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Iran"
-msgstr "Írán"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
+msgstr ""
+"Argumenty: (arg, listen_tcp=None)\n"
+"\n"
+"PovolĂ­/ZakĂĄĆŸe spojenĂ­ na X server. PrvnĂ­ argument udĂĄvĂĄ, co se provede\n"
+"na straně klienta. ALL (vơechna spojení jsou povolena), LOCAL (pouze "
+"lokĂĄlnĂ­\n"
+"spojenĂ­ je povoleno) a NONE (nenĂ­ povoleno ĆŸĂĄdnĂ© spojenĂ­)."
#: ../../lang.pm:1
#, c-format
-msgid "Iraq"
-msgstr "IrĂĄk"
+msgid "Tuvalu"
+msgstr "Tuvalu"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "BritskĂ© teritorium IndickĂ©ho moƙe"
+msgid "Use auto detection"
+msgstr "PouĆŸĂ­t autodetekci"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "India"
-msgstr "Indie"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr ""
+"GPM pƙidĂĄvĂĄ do textovĂœch programĆŻ podporu myĆĄi (napƙ pro Midnight "
+"Commander).\n"
+"MĆŻĆŸe takĂ© v konzoli provĂĄdět operace 'vyjmi' a 'vloĆŸ' a ovlĂĄdat pop-up menu."
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Israel"
-msgstr "Izrael"
+msgid "Started on boot"
+msgstr "Spustit pƙi startu"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Ireland"
-msgstr "Irsko"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
+msgstr ""
+"Pƙipojte se k tĂœmĆŻm podpory společnosti MandrakeSoft a on-line LinuxovĂ© "
+"komunitě, sdĂ­lejte svĂ© znalosti a pomozte ostatnĂ­m tĂ­m, ĆŸe se stanete "
+"uznĂĄvanĂœm Expertem na webovĂœch strĂĄnkĂĄch on-line technickĂ© podpory:"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Indonesia"
-msgstr "Indonésie"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
+msgstr ""
+"Nastavením následujících voleb lze upravit zabezpečení vaơeho\n"
+"systĂ©mu. Pokud potƙebujete poradit, prohlĂ©dněte si tipy s nĂĄpovědou.\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hungary"
-msgstr "Maďarsko"
+msgid "Automatically find available printers on remote machines"
+msgstr "Automaticky nalĂ©zt dostupnĂ© tiskĂĄrny na vzdĂĄlenĂœch počítačích"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Haiti"
-msgstr "Haiti"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
+"\n"
+"- UloĆŸit na pĂĄsku na zaƙízenĂ­: %s"
#: ../../lang.pm:1
#, c-format
-msgid "Croatia"
-msgstr "Chorvatsko"
+msgid "East Timor"
+msgstr "VĂœchodnĂ­ Timor"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Honduras"
-msgstr "Honduras"
+msgid "Del profile..."
+msgstr "Smazat profil..."
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Heard a McDonaldovy ostrovy"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr ""
+"Argumenty: (arg)\n"
+"\n"
+"PovolĂ­/ZakĂĄĆŸe vĂœpis uĆŸivatelĆŻ ve sprĂĄvcĂ­ch pƙihlĂĄĆĄenĂ­ (kdm nebo gdm)."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hong Kong"
-msgstr "Hong Kong"
+msgid "Installing Foomatic..."
+msgstr "Instaluji Foomatic ..."
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "China"
-msgstr "Čína"
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "Prosím odhlaste se a pak stiskněte Ctrl-Alt-Backspace"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Guyana"
-msgstr "Guyana"
+msgid "detected"
+msgstr "detekovĂĄno"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Guinea-Bissau"
-msgstr "Guinea-Bissau"
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr "Je potƙeba restartovat sĂ­Ć„. Chcete provĂ©st restart ?"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Guam"
-msgstr "Guam"
+msgid "Package: "
+msgstr "Balíček: "
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Guatemala"
-msgstr "Guatemala"
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr "Nelze zapsat soubor /etc/sysconfig/bootsplash."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "JiĆŸnĂ­ Georgie a ostrovy South Sandwich"
+msgid "SECURITY WARNING!"
+msgstr "BEZPEČNOSTNÍ VAROVÁNÍ!"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Equatorial Guinea"
-msgstr "RovnĂ­kovĂĄ Guinea"
+msgid "StarOffice"
+msgstr "StarOffice"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Guadeloupe"
-msgstr "Guadeloupe"
+msgid "No, I don't want autologin"
+msgstr "Ne, nechci automatickĂ© pƙihlĂĄĆĄenĂ­"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Guinea"
-msgstr "Guinea"
+msgid "Windows Migration tool"
+msgstr "NĂĄstroj pro migraci z Windows"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Gambia"
-msgstr "Gambie"
+msgid "All languages"
+msgstr "VĆĄechny jazyky"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Greenland"
-msgstr "GrĂłnsko"
+msgid "Removing %s"
+msgstr "Odstraƈuji %s"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Gibraltar"
-msgstr "Gibraltar"
+msgid "Testing your connection..."
+msgstr "Testuji pƙipojení k internetu..."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Ghana"
-msgstr "Ghana"
+msgid "Cache size"
+msgstr "Velikost vyrovnávací paměti"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "French Guiana"
-msgstr "FrancouzskĂĄ Guinea"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
+msgstr ""
+"Hesla jsou nynĂ­ aktivnĂ­, ale stĂĄle nedoporučuji pouĆŸĂ­t tento počítač na sĂ­ti."
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Georgia"
-msgstr "Georgie"
+msgid "Start sector: "
+msgstr "Počáteční sektor: "
#: ../../lang.pm:1
#, c-format
-msgid "Grenada"
-msgstr "Grenada"
+msgid "Congo (Brazzaville)"
+msgstr "Kongo (Brazzaville)"
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "United Kingdom"
-msgstr "VelkĂĄ BritĂĄnie"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr "Balíček %s musĂ­ bĂœt nainstalovĂĄn. Chcete ho nainstalovat?"
#: ../../lang.pm:1
#, c-format
-msgid "Gabon"
-msgstr "Gabon"
+msgid "Seychelles"
+msgstr "Seychely"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Faroe Islands"
-msgstr "Faroe Islands"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
+msgstr ""
+"PrinterDrake provedl porovnĂĄnĂ­ modelu tiskĂĄrny, kterĂœ byl zjiĆĄtěn pƙi auto-"
+"detekci s modelem obsaĆŸenĂœm v jeho databĂĄzi a nabĂ­dl nejlepĆĄĂ­ ƙeĆĄenĂ­. Tato "
+"volba mĆŻĆŸe bĂœt ĆĄpatnĂĄ, zvlĂĄĆĄĆ„ pokud nenĂ­ tiskĂĄrna obsaĆŸena v databĂĄzi. "
+"Zkontrolujte, zda je volba sprĂĄvnĂĄ a klepněte na \"ZvolenĂœ model je sprĂĄvnĂœ"
+"\" a pokud není, volte \"Vybrat model ručně\". V dalơí obrazovce potom bude "
+"moĆŸnĂ© vybrat model tiskĂĄrny ručně.\n"
+"\n"
+"Pro vaĆĄi tiskĂĄrnu PrinterDrake nalezl:\n"
+"\n"
+"%s"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Micronesia"
-msgstr "Mikronésie"
+msgid "Bad password on %s"
+msgstr "Chybné heslo na %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Falklandy (Malvinas)"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
+msgstr ""
+"\n"
+"Naơel jsem jednu neznámou tiskárnu pƙímo pƙipojenou k vaơemu počítači"
#: ../../lang.pm:1
#, c-format
-msgid "Fiji"
-msgstr "FidĆŸi"
+msgid "Zambia"
+msgstr "Zambie"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Finland"
-msgstr "Finsko"
+msgid "Security Administrator (login or email)"
+msgstr "AdministrĂĄtor bezpečnosti (pƙihlaĆĄovacĂ­ jmĂ©no nebo email)"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Ethiopia"
-msgstr "Etiopie"
+msgid "Sorry, we support only 2.4 kernels."
+msgstr "Omlouváme se, ale podporujeme pouze jádra ƙady 2.4."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Spain"
-msgstr "Ơpanělsko"
+msgid "Romanian (qwerty)"
+msgstr "Rumunské (QWERTY)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Eritrea"
-msgstr "Eritrea"
+msgid "Under Devel ... please wait."
+msgstr "Vyvíjí se... čekejte prosím."
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Western Sahara"
-msgstr "ZĂĄpadnĂ­ Sahara"
+msgid "Czech Republic"
+msgstr "Česká republika"
#: ../../lang.pm:1
#, c-format
msgid "Egypt"
msgstr "Egypt"
-#: ../../lang.pm:1
-#, c-format
-msgid "Estonia"
-msgstr "Estonsko"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Ecuador"
-msgstr "EkvĂĄdor"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Algeria"
-msgstr "AlĆŸĂ­rsko"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Dominican Republic"
-msgstr "DominikĂĄnskĂĄ republika"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Dominica"
-msgstr "Dominica"
-
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Denmark"
-msgstr "DĂĄnsko"
+msgid "Old configuration (isdn4net)"
+msgstr "StarĂĄ konfigurace (isdn4net)"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Djibouti"
-msgstr "DĆŸibuti"
+msgid "Sound card"
+msgstr "ZvukovĂĄ karta"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Cyprus"
-msgstr "Kypr"
+msgid "Import Fonts"
+msgstr "Zavádění fontƯ"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Christmas Island"
-msgstr "Vánoční ostrov"
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+"MĂĄte jeden velikĂœ oddĂ­l\n"
+"(větĆĄinou pouĆŸĂ­vanĂœ Microsoft Windows).\n"
+"Doporučuji vám nejprve zmenơit tento oddíl\n"
+"(klepněte na něj a potom na \"Změnit velikost\")"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Cape Verde"
-msgstr "Cape Verde"
+msgid "Suppress Temporary Files"
+msgstr "Ignorovat dočasnĂ© soubory"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cuba"
-msgstr "Kuba"
+msgid "Change partition type"
+msgstr "Změnit typ oddílu"
-#: ../../lang.pm:1
-#, c-format
-msgid "Colombia"
-msgstr "Kolumbie"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
+"RozliĆĄenĂ­\n"
+"\n"
+" Zde si mĆŻĆŸete vybrat rozliĆĄenĂ­ a barevnou hloubku, kterĂ© vaĆĄe karta \n"
+"podporuje. Vyberte si to co vĂĄm nejvĂ­ce vyhovuje (vĂœběr lze po instalaci\n"
+"samozƙejmě změnit). Na monitoru bude zobrazena pƙíklad nastavení."
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Cameroon"
-msgstr "Kamerun"
+msgid "Network Options"
+msgstr "Volby sítě"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Chile"
-msgstr "Chile"
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
+"Zobrazit téma\n"
+"na konzoli"
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Cook Islands"
-msgstr "Cookovy ostrovy"
+msgid "Statistics"
+msgstr "Statistiky"
-#: ../../lang.pm:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Cote d'Ivoire"
-msgstr "Cote d'Ivoire"
+msgid "(on %s)"
+msgstr "(na %s)"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Switzerland"
-msgstr "Ć vĂœcarsko"
+msgid "MM Series"
+msgstr "MM Series"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Congo (Brazzaville)"
-msgstr "Kongo (Brazzaville)"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr ""
+"Knihovna, kterĂ© zabraƈuje ĂștokĆŻm proti pƙetečenĂ­ bufferu nebo proti ĆĄpatnĂ©mu "
+"formátování ƙetězcƯ."
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Central African Republic"
-msgstr "CentrĂĄlnĂ­ africkĂĄ republika"
+msgid "average"
+msgstr "prƯměr"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congo (Kinshasa)"
-msgstr "Kongo (Kinshasa)"
+msgid "New printer name"
+msgstr "NovĂœ nĂĄzev tiskĂĄrny"
#: ../../lang.pm:1
#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Kokosové ostrovy (Keeling Islands)"
+msgid "Equatorial Guinea"
+msgstr "RovnĂ­kovĂĄ Guinea"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Canada"
-msgstr "Kanada"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
+"Argumenty: (arg)\n"
+"\n"
+"PovolĂ­/ZakĂĄĆŸe automatickĂ© pƙihlĂĄĆĄenĂ­."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belize"
-msgstr "Belize"
+msgid "Build Backup"
+msgstr "Vytvoƙit zálohu"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Belarus"
-msgstr "Bělorusko"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
+"Pro vytiĆĄtěnĂ­ souboru z pƙíkazovĂ© ƙádky (v terminĂĄlovĂ©m okně) pouĆŸijte "
+"pƙíkaz \"%s <soubor>\" nebo \"%s <soubor>\".\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Botswana"
-msgstr "Botswana"
+msgid "Currently, no alternative possibility is available"
+msgstr "NynĂ­ nenĂ­ povolena ĆŸĂĄdnĂĄ alternativa"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Bouvet Island"
-msgstr "Bouvet Island"
+msgid "Romanian (qwertz)"
+msgstr "Rumunské (QWERTZ)"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Bhutan"
-msgstr "BhĂștĂĄn"
+msgid "Write Config"
+msgstr "Zapsat nastavenĂ­"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Bahamas"
-msgstr "Bahamy"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+"DĂ©mon routed umoĆŸĆˆuje automaticky obnovovat směrovacĂ­ tabulku (router "
+"table)\n"
+"pro IP adresy. K tomu pouĆŸĂ­vĂĄ protokol RIP. ZatĂ­mco RIP je bÄ›ĆŸně pouĆŸĂ­vĂĄn\n"
+"v malĂœch sĂ­tĂ­ch, pro sloĆŸitějĆĄĂ­ sĂ­tě je zapotƙebĂ­ sloĆŸitějĆĄĂ­ protokoly."
#: ../../lang.pm:1
#, c-format
-msgid "Brazil"
-msgstr "BrazĂ­lie"
+msgid "Kiribati"
+msgstr "Kiribati"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Bolivia"
-msgstr "BolĂ­vie"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
+msgstr ""
+"Argumenty: (arg)\n"
+"\n"
+"PovolĂ­/ZakĂĄĆŸe vzdĂĄlenĂ© pƙihlĂĄĆĄenĂ­ uĆŸivatele root."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Brunei Darussalam"
-msgstr "Brunei Darussalam"
+msgid "Browse"
+msgstr "ProchĂĄzet"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Bermuda"
-msgstr "Bermudy"
+msgid "CDROM"
+msgstr "CDROM"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Benin"
-msgstr "Benin"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "Chcete se nyní pokusit pƙipojit k internetu?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Burundi"
-msgstr "Burundi"
+msgid "Belgian"
+msgstr "Belgické"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bahrain"
-msgstr "Bahrajn"
+msgid "Do you have an ISA sound card?"
+msgstr "Máte nějakou zvukovou kartu na ISA sběrnici?"
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Bulgaria"
-msgstr "Bulharsko"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
+msgstr ""
+"Ve vaĆĄem počítači nebyl nalezen ĆŸĂĄdnĂœ sĂ­Ć„ovĂœ adaptĂ©r.\n"
+"Nemohu nastavit typ spojenĂ­."
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Burkina Faso"
-msgstr "Burkina Faso"
+msgid "Windows"
+msgstr "Windows"
-#: ../../lang.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Bangladesh"
-msgstr "Bangladéƥ"
+msgid "Can't make screenshots before partitioning"
+msgstr "Nelze provĂ©st sejmutĂ­ obrazovky pƙed rozdělenĂ­m diskĆŻ"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Barbados"
-msgstr "Barbados"
+msgid "Host Name"
+msgstr "Název počítače"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Bosna a Hercegovina"
+msgid "/File/Save _As"
+msgstr "/Soubor/UloĆŸit _jako"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Azerbaijan"
-msgstr "ÁzerbĂĄjdĆŸĂĄn"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr ""
+"Pro zĂ­skĂĄnĂ­ pƙístupu na vzdĂĄlenĂ© CUPS servery v lokĂĄlnĂ­ sĂ­ti potƙebujete "
+"pouze povolit volbu \"Automaticky nalĂ©zt dostupnĂ© tiskĂĄrny na vzdĂĄlenĂœch "
+"počítačích\". CUPS server následně informuje o těchto tiskárnách. Vơechny "
+"znåmé tiskårny potom budou vypsåny v sekci \"Vzdålené tiskårny\" v hlavním "
+"okně aplikace PrinterDrake. Pokud CUPS server(y) nejsou ve vaơí lokální "
+"sĂ­ti, musĂ­te zadat IP adresu a volitelně takĂ© číslo portu, aby bylo moĆŸnĂ© "
+"uvedené informace ze serverƯ získat."
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Aruba"
-msgstr "Aruba"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr "%s není v databázi skenerƯ, nastavit ručně?"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "Australia"
-msgstr "AustrĂĄlie"
+msgid "Delay before booting default image"
+msgstr "Prodleva pƙed automatickĂœm spuĆĄtěnĂ­m"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "American Samoa"
-msgstr "AmerickĂĄ Samoa"
+msgid "Restrict command line options"
+msgstr "OmezenĂ­ nastavenĂ­ z pƙíkazovĂ© ƙádky"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Argentina"
-msgstr "Argentina"
+msgid "East Europe"
+msgstr "VĂœchodnĂ­ Evropa"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Antarctica"
-msgstr "Antarktida"
+msgid "Use free space"
+msgstr "PouĆŸĂ­t volnĂ© mĂ­sto"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Angola"
-msgstr "Angola"
+msgid "use dhcp"
+msgstr "pouĆŸĂ­t dhcp"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Netherlands Antilles"
-msgstr "Nizozemské Antily"
+msgid "Mail alert"
+msgstr "Varovné zpråvy e-mailem"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Armenia"
-msgstr "Arménie"
+msgid "Internet configuration"
+msgstr "NastavenĂ­ Internetu"
#: ../../lang.pm:1
#, c-format
-msgid "Albania"
-msgstr "AlbĂĄnie"
+msgid "Uzbekistan"
+msgstr "UzbekistĂĄn"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Anguilla"
-msgstr "Anguilla"
+msgid "Detected %s"
+msgstr "Nalezeno %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Antigua a Barbuda"
+msgid "/Autodetect _printers"
+msgstr "/Automaticky detekovat _tiskĂĄrny"
-#: ../../lang.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "United Arab Emirates"
-msgstr "Spojené Arabské Emiråty"
+msgid "Finish"
+msgstr "Ukončit"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Andorra"
-msgstr "Andorra"
+msgid "Show automatically selected packages"
+msgstr "UkĂĄzat automaticky vybranĂ© balíčky"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Afghanistan"
-msgstr "AfghĂĄnistĂĄn"
+msgid "CPU flags reported by the kernel"
+msgstr "Pƙíznaky CPU nalezenĂ© jĂĄdrem"
#: ../../lang.pm:1
#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
-
-#: ../../loopback.pm:1
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "PropletenĂ© pƙípojnĂ© body %s\n"
-
-#: ../../lvm.pm:1
-#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Odeberte nejdƙíve logickĂ© disky\n"
-
-#: ../../modules.pm:1
-#, c-format
-msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"Podpora PCMCIA jiĆŸ nenĂ­ dostupnĂĄ pro kernely 2.2. PouĆŸijte prosĂ­m ƙadu 2.4."
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "TOČIT KOLEČKEM!"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "To activate the mouse,"
-msgstr "VyzkouĆĄejte na myĆĄi,"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "Please test the mouse"
-msgstr "VyzkouĆĄejte prosĂ­m, zda funguje myĆĄ"
+msgid "Togo"
+msgstr "Togo"
-#: ../../mouse.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "No mouse"
-msgstr "Bez myĆĄi"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr "Něco neproběhlo sprĂĄvně! - Je nainstalovanĂœ program mkisofs?"
-#: ../../mouse.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "none"
-msgstr "ĆœĂĄdnĂĄ"
+msgid "16 MB"
+msgstr "16 MB"
-#: ../../mouse.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "3 buttons"
-msgstr "3 tlačítka"
+msgid "Please try again"
+msgstr "Zkuste to znovu, prosĂ­m"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "2 buttons"
-msgstr "2 tlačítka"
+msgid "The model is correct"
+msgstr "ZvolenĂœ model je sprĂĄvnĂœ"
-#: ../../mouse.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "1 button"
-msgstr "1 tlačítko"
+msgid "FAT resizing failed: %s"
+msgstr "Změna FAT oddílu neuspěla: %s"
-#: ../../mouse.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "busmouse"
-msgstr "Busmouse"
+msgid "Individual package selection"
+msgstr "VĂœběr jednotlivĂœch balíčkĆŻ"
-#: ../../mouse.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid "This partition is not resizeable"
+msgstr "Na tomto diskovĂ©m oddĂ­lu nelze měnit velikost"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (sĂ©riovĂĄ, starĂœ C7 typ)"
+msgid "Location"
+msgstr "Umístění"
-#: ../../mouse.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid "USA (cable-hrc)"
+msgstr "USA (cable-hrc)"
-#: ../../mouse.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "MM Series"
-msgstr "MM Series"
+msgid "Journalised FS"
+msgstr "ĆœurnĂĄlovacĂ­ FS"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid "Guatemala"
+msgstr "Guatemala"
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "This machine"
+msgstr "Tento počítač"
-#: ../../mouse.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech série CC (sériovå)"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "PĂ­smeno v DOSu: %s (jenom odhad)\n"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select the files or directories and click on 'OK'"
+msgstr "Vyberte soubory nebo adresáƙe a klepněte na 'Pƙidat'"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid "Bahrain"
+msgstr "Bahrajn"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "omit scsi modules"
+msgstr "vynechat SCSI moduly"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Standardní tƙítlačítková myơ"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr "Rodina pro cpu (napƙ. 6 pro i686 tƙídu)"
-#: ../../mouse.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Standardní dvoutlačítková myơ"
+msgid ""
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
+msgstr ""
+"ProtoĆŸe provĂĄdĂ­te instalaci po sĂ­ti, je jiĆŸ sĂ­Ć„ nastavena.\n"
+"Klepněte na Ok pro zachovĂĄnĂ­ nastavenĂ­ nebo klepněte na ZruĆĄit pro novĂ© "
+"nastavení pƙipojení Internetu a k síti.\n"
-#: ../../mouse.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "serial"
-msgstr "SĂ©riovĂĄ"
+msgid "Keyboard layout: %s\n"
+msgstr "RozloĆŸenĂ­ klĂĄvesnice: %s\n"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
+"Zde mĆŻĆŸete rozhodnout, zda tiskĂĄrny pƙipojenĂ© k tomuto počítači budou "
+"vzdĂĄleně pƙístupnĂ© a z kterĂœch vzdĂĄlenĂœch počítačƯ."
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Wheel"
-msgstr "S kolečkem"
+msgid "Maltese (US)"
+msgstr "Maltézské (US)"
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Generic"
-msgstr "ObecnĂœ"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"Pƙipojuje a odpojuje vĆĄechny sĂ­Ć„ovĂ© (NFS), SMB (Lan/Windows) a Netware "
+"(NCP)\n"
+"pƙípojnĂ© body (mount points)."
-#: ../../mouse.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid "Tvcard"
+msgstr "TV karta"
-#: ../../mouse.pm:1
-#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Toggle between normal/expert mode"
+msgstr "Pƙepnout se do módu 'normální'"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Standardní PS2 myơ s kolečkem"
+msgid "Size"
+msgstr "Velikost"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "GRUB"
+msgstr "GB"
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Standard"
-msgstr "StandardnĂ­"
+msgid "Greenland"
+msgstr "GrĂłnsko"
#: ../../mouse.pm:1
#, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - myĆĄ"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "PƙepnutĂ­ mezi abecednĂ­m a skupinovĂœm ƙazenĂ­m"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Collapse Tree"
-msgstr "Sbalit větev"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Expand Tree"
-msgstr "Rozbalit větev"
-
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Info"
-msgstr "Informace"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Is this correct?"
-msgstr "Je to správně?"
-
-#: ../../my_gtk.pm:1
-#, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-2,*-r-*"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Chyba pƙi zapisování do souboru %s"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Bad backup file"
-msgstr "Ć patnĂœ zĂĄloĆŸnĂ­ soubor"
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
-#: ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Obnova ze souboru %s neuspěla: %s"
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr "PĂĄska nemĂĄ sprĂĄvnĂœ nĂĄzev. MĂĄ označenĂ­ %s."
-#: ../../partition_table.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"Ve tabulce diskovĂœch oddĂ­lĆŻ je mezera, ale nemohu ji pouĆŸĂ­t.\n"
-"JedinĂ© ƙeĆĄenĂ­ je pƙesunout primĂĄrnĂ­ oddĂ­ly tak, abyste měli mezeru vedle\n"
-"rozơíƙenĂœch oddĂ­lĆŻ."
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "RozơíƙenĂ© diskovĂ© oddĂ­ly nejsou na tomto systĂ©mu podporovĂĄny"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "mount failed: "
-msgstr "chyba pƙipojování: "
-
-#: ../../pkgs.pm:1
-#, c-format
-msgid "maybe"
-msgstr "mĆŻĆŸe se hodit"
-
-#: ../../pkgs.pm:1
-#, c-format
-msgid "nice"
-msgstr "nedĆŻleĆŸitĂ©"
-
-#: ../../pkgs.pm:1
-#, c-format
-msgid "very nice"
-msgstr "nejmĂ©ně dĆŻleĆŸitĂ©"
+"SdĂ­lenĂ­ internetovĂ©ho pƙipojenĂ­ uĆŸ bylo nastaveno.\n"
+"NynĂ­ je povoleno.\n"
+"\n"
+"Co chcete dále dělat?"
-#: ../../pkgs.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "important"
-msgstr "dĆŻleĆŸitĂ©"
+msgid "Delete All NBIs"
+msgstr "Smazat vĆĄechny NBI"
-#: ../../pkgs.pm:1
-#, c-format
-msgid "must have"
-msgstr "musĂ­te mĂ­t"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
+msgstr ""
+"Pokud jsou nějakĂ© pochybnosti, je zobrazen dialog s vĂœběrem moĆŸnostĂ­.\n"
+"\n"
+" * \"JakĂœ spouĆĄtěč pouĆŸĂ­t:\" je moĆŸnĂ© si vybrat ze tƙí moĆŸnostĂ­:\n"
+"\n"
+" * \"GRUB\": pokud preferujete zavaděč Grub (textová nabídka).\n"
+"\n"
+" * \"LILO s grafickou nabĂ­dkou\": pokud preferujete LILO s grafickĂœm\n"
+"rozhranĂ­m.\n"
+"\n"
+" * \"LILO s textovou nabídkou\": pokud preferujete textové rozhraní.\n"
+"\n"
+" * \"SpouĆĄtěcĂ­ zaƙízenĂ­\": ve větĆĄině pƙípadĆŻ nenĂ­ nutnĂ© měnit vĂœchozĂ­\n"
+"nastavenĂ­ (\"/dev/hda\"), ale lze nainstalovat zavaděč na druhĂœ disk\n"
+"(\"/dev/hdb\") nebo dokonce na disketu (\"/dev/fd0\").\n"
+"\n"
+" * \"Prodleva pƙes spuơtěním\": pokud zapnete počítač, je v tomto čase\n"
+"umoĆŸněno uĆŸivateli vybrat si jinĂœ systĂ©m z nabĂ­dky pƙed tĂ­m, neĆŸ bude\n"
+"zaveden vĂœchozĂ­ systĂ©m.\n"
+"\n"
+"!! Vyvarujte se pokusƯ nenainstalovat zavaděč (vybráním volby \"Pƙeskočit"
+"\"),\n"
+"protoĆŸe by měl existovat zpĆŻsob, jak zavĂ©st systĂ©m Mandrake Linux!\n"
+"TakĂ© si dobƙe rozmyslete, jakĂ© změny zde provĂĄdĂ­te !!\n"
+"\n"
+"KlepnutĂ­m na tlačítko \"RozơíƙenĂ©\" se dialog rozơíƙí o dalĆĄĂ­ moĆŸnosti,\n"
+"vyhrazenĂ© pro znalĂ© uĆŸivatele."
-#: ../../raid.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "NenĂ­ dostatek oddĂ­lĆŻ pro RAID Ășrovně %d\n"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
+msgstr ""
+"pokud je nastaveno, odesĂ­lĂĄ report na danĂœ email nebo pƙímo uĆŸivateli root"
-#: ../../raid.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "mkraid failed"
-msgstr "mkraid neuspěl"
+msgid "Which configuration of XFree do you want to have?"
+msgstr "KterĂ© XFree by jste chtěli pouĆŸĂ­t?"
-#: ../../raid.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid neuspěl (moĆŸnĂĄ, ĆŸe chybĂ­ raidtools?)"
+msgid "More"
+msgstr "VĂ­ce"
-#: ../../raid.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "NemĆŻĆŸu pƙidat oddĂ­l do _naformĂĄtovanĂ©ho_ RAID md%d"
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+"S touto bezpečnostnĂ­ ĂșrovnĂ­ je moĆŸnĂ© pouĆŸĂ­vat systĂ©m jako server.\n"
+"Bezpečnost je nynĂ­ dostatečně vysokĂĄ, aby bylo moĆŸnĂ© pouĆŸĂ­vat systĂ©m jako "
+"server, ke kterému\n"
+"je moĆŸnĂ© pƙipojit mnoho klientĆŻ. PoznĂĄmka: pokud je počítač pouĆŸĂ­vĂĄn pouze "
+"jako klient pro pƙipojenĂ­ k Internetu, je lepĆĄĂ­ zvolit niĆŸĆĄĂ­ Ășroveƈ."
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Stop"
-msgstr "Stop"
+msgid "Account Password"
+msgstr "Heslo vaĆĄeho Ășčtu"
-#: ../../services.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Start"
-msgstr "Start"
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
+msgstr ""
+"Rozhodli jste se nainstalovat zavaděč systĂ©mu na oddĂ­l.\n"
+"To znamenĂĄ, ĆŸe jiĆŸ zavaděč na disku, ze kterĂ©ho spouĆĄtĂ­te systĂ©m nějakĂœ je "
+"(napƙ. System Commander).\n"
+"\n"
+"Ze kterého disku spouƥtíte systém?"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "On boot"
-msgstr "Pƙi spuơtění"
+msgid "Tajik keyboard"
+msgstr "TĂĄdĆŸickĂĄ klĂĄvesnice"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No additional information\n"
-"about this service, sorry."
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
msgstr ""
-"Nejsou ĆŸĂĄdnĂ© dalĆĄĂ­\n"
-"informace o sluĆŸbě, promiƈte."
+"Konfiguraci tiskĂĄrny, kterou jste provedli pro frontu %s lze pƙenĂ©st na "
+"frontu %s, tj. na současnou frontu. Vơechna nastavená data (název tiskárny, "
+"popis, umĂ­stěnĂ­, typ pƙipojenĂ­ a dalĆĄĂ­ vĂœchozĂ­ nastavenĂ­) budou pƙepsĂĄna, "
+"ale tiskovĂ© Ășlohy nebudou pƙeneseny.\n"
+"Ne vĆĄechny fronty lze pƙenĂ©st z nĂĄsledujĂ­cĂ­ch dĆŻvodĆŻ:\n"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Services and deamons"
-msgstr "SluĆŸby a dĂ©moni"
+msgid "Font List"
+msgstr "Seznam fontĆŻ"
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "stopped"
-msgstr "zastaveno"
+msgid ""
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
+msgstr ""
+"MĆŻĆŸete potƙebovat změnit startovacĂ­ zaƙízenĂ­ pro Open Firmware\n"
+" pro aktivaci spouơtěcího programu. Pokud nevidíte po spuơtění prompt,\n"
+" stiskněte pƙi startu Command-Option-O-F a zadejte:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Potom zadejte: shut-down\n"
+"Pƙi dalĆĄĂ­m spuĆĄtěnĂ­ uĆŸ uvidĂ­te prompt."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "running"
-msgstr "spuơtěno"
+msgid ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
+msgstr ""
+"ZdĂĄ se, ĆŸe mĂĄte nějakĂœ neznĂĄmĂœ počítač,\n"
+"na kterém nebude Yaboot pracovat.\n"
+"Instalace bude pokračovat, ale budete\n"
+"potƙebovat BootX pro spuĆĄtěnĂ­ systĂ©mu."
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Zvolte si, kterĂ© sluĆŸby by měli bĂœt automaticky spuĆĄtěny pƙi startu"
+msgid "Select file"
+msgstr "Zvolit soubor"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Database Server"
-msgstr "Databåzové servery"
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
+msgstr "Vyberte sĂ­Ć„ nebo počítač, na kterĂ©m budou lokĂĄlnĂ­ tiskĂĄrny dostupnĂ©:"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote Administration"
-msgstr "VzdĂĄlenĂĄ administrace"
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr ""
+"Tyto pƙíkazy lze nastavit do políčka \"Pƙíkazy tisku\" v dialogu tisku ve "
+"větĆĄině aplikacĂ­, ale nezadĂĄvĂĄ se zde nĂĄzev souboru, kterĂ© je pokaĆŸdĂ© jinĂ© v "
+"zåvislosti na dané aplikaci.\n"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "File sharing"
-msgstr "SdĂ­lenĂ­ souborĆŻ"
+msgid "Japan"
+msgstr "Japonsko"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet"
-msgstr "Internet"
+msgid "Print option list"
+msgstr "MoĆŸnosti tiskĂĄrny"
-#: ../../services.pm:1
+#: ../../standalone/localedrake:1
#, c-format
-msgid "Printing"
-msgstr "Tisk"
+msgid "The change is done, but to be effective you must logout"
+msgstr "Změny jsou provedeny, ale pro aktivaci je nutnĂ© provĂ©st odhlĂĄĆĄenĂ­"
-#: ../../services.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Startuje X Font Server (to je nezbytnĂ© pro běh XFree)."
+msgid "Search servers"
+msgstr "Vyhledat servery"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Nahrát ovladače pro usb zaƙízení."
+msgid "NCP queue name missing!"
+msgstr "Chybí nåzev tiskové fronty pro NCP!"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
+"Warning, another internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"Syslog je program pomocĂ­ něhoĆŸ zaznamenĂĄvĂĄ mnoho dĂ©monĆŻ sprĂĄvy do "
-"systĂ©movĂœch\n"
-"log souborĆŻ. Je dobrĂ© mĂ­t spuĆĄtěnĂœ syslog."
+"VarovĂĄnĂ­, bylo detekovĂĄno jinĂ© pƙipojenĂ­ k Internetu, zƙejmě je pouĆŸita sĂ­Ć„"
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Spustit zvukovĂœ systĂ©m pƙi startu"
+msgid "Cd-Rom labeled \"%s\""
+msgstr "CD-ROM označenĂ© \"%s\""
#: ../../services.pm:1
#, c-format
msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
msgstr ""
-"Protokol rwho umoĆŸĆˆuje vzdĂĄlenĂœm uĆŸivatelĆŻm zĂ­skat seznam\n"
-"vĆĄech uĆŸivatelĆŻ pƙihlĂĄĆĄenĂœch na počítači s dĂ©monem rwho (je to podobnĂ©\n"
-"sluĆŸbě finger)."
+"UklĂĄdĂĄ a obnovuje 'stav entropie' na počítači, coĆŸ je pouĆŸĂ­vĂĄno pro\n"
+"kvalitnějĆĄĂ­ generaci nĂĄhodnĂœch čísel."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
msgstr ""
-"Protokol rusers umoĆŸĆˆuje uĆŸivatelĆŻm sĂ­tě zjistit kdo je pƙihlĂĄĆĄen na\n"
-"jinĂ©m počítači."
+"Selhala kontrola souborovĂ©ho systĂ©mu %s. Chcete opravit chyby? (pozor, mĆŻĆŸe "
+"dojít ke ztrátě dat)"
-#: ../../services.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Protokol rstat umoĆŸĆˆuje uĆŸivatelĆŻm sĂ­tě sledovat vytĂ­ĆŸenĂ­ jednotlivĂœch\n"
-"strojĆŻ pƙipojenĂœch k sĂ­ti."
+msgid "Turn your computer into a reliable server"
+msgstr "Vytvoƙte se svĂ©ho počítače spolehlivĂœ server."
-#: ../../services.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"DĂ©mon routed umoĆŸĆˆuje automaticky obnovovat směrovacĂ­ tabulku (router "
-"table)\n"
-"pro IP adresy. K tomu pouĆŸĂ­vĂĄ protokol RIP. ZatĂ­mco RIP je bÄ›ĆŸně pouĆŸĂ­vĂĄn\n"
-"v malĂœch sĂ­tĂ­ch, pro sloĆŸitějĆĄĂ­ sĂ­tě je zapotƙebĂ­ sloĆŸitějĆĄĂ­ protokoly."
+msgid " (driver %s)"
+msgstr " (ovladač %s)"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
+"Loopback file(s):\n"
+" %s\n"
msgstr ""
-"Pƙiƙazuje pƙímĂĄ zaƙízenĂ­ blokovĂœm (napƙíklad diskovĂ© oddĂ­ly)\n"
-"pro aplikace jako je Oracle nebo DVD pƙehrávač"
+"Loopback soubor(y): \n"
+" %s\n"
-#: ../../services.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"UklĂĄdĂĄ a obnovuje 'stav entropie' na počítači, coĆŸ je pouĆŸĂ­vĂĄno pro\n"
-"kvalitnějĆĄĂ­ generaci nĂĄhodnĂœch čísel."
+msgid "I don't know"
+msgstr "NevĂ­m"
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr "Postfix je program pro doručovĂĄnĂ­ poĆĄty z jednoho počítače na jinĂœ."
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr ", TCP/IP hostitel \"%s\", port %s"
-#: ../../services.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
msgstr ""
-"Portmapper spravuje RPC spojenĂ­, kterĂĄ jsou pouĆŸĂ­vĂĄna protokoly jako NFS\n"
-"a NIS. Portmap server musĂ­ bĂœt spuĆĄtěn na počítačích, kterĂ© fungujĂ­ jako\n"
-"servery pro protokoly, kterĂ© pouĆŸĂ­vajĂ­ mechanismus RPC."
+"Zde mĆŻĆŸete nastavit disketu pro automatickou instalaci. Tato volba je někdy "
+"nebezpečnĂĄ a měla by se pouĆŸĂ­vat s opatrnostĂ­.\n"
+"\n"
+"Tato disketa dovoluje zopakovat instalaci, kterĂĄ jiĆŸ na tomto počítači byla "
+"provedena s tĂ­m, ĆŸe v některĂœch krocĂ­ch lze zadat jinĂ© hodnoty.\n"
+"\n"
+"Pro maximální bezpečnost není rozdělování diskƯ ani formátování prováděno "
+"automaticky, i pƙesto, pokud to pƙi instalaci zvolíte.\n"
+"\n"
+"Chcete pokračovat?"
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
msgstr ""
-"Podpora PCMCIA větĆĄinou znamenĂĄ podporu zaƙízenĂ­ jako sĂ­Ć„ovĂ© karty a\n"
-"modemy v laptopech. Nespustí se pokud ji pƙímo nenastavíte, ale není "
-"problém\n"
-"jĂ­ mĂ­t nainstalovanou i na počítačích, kterĂ© ji nepotƙebujĂ­."
-
-#: ../../services.pm:1
-#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Podpora pro OKI 4w a kompatibilnĂ­ wintiskĂĄrny."
+"\n"
+"\n"
+"VaĆĄe karta nynĂ­ pouĆŸĂ­vĂĄ ovladač %s\"%s\" (vĂœchozĂ­ ovladač pro vaĆĄi kartu je "
+"\"%s\")"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Automaticky nastaví podporu numerické klåvesnice v konzoli\n"
-"a v XFree pƙi startu."
+msgid "Post Uninstall"
+msgstr "NastavenĂ­ po odebrĂĄnĂ­"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS je oblĂ­benĂœ protokol pro sdĂ­lenĂ­ souborĆŻ pƙes sĂ­tě TCP/IP.\n"
-"Tato sluĆŸba poskytuje moĆŸnost uzamykĂĄnĂ­ souborĆŻ na NFS."
+msgid " ("
+msgstr " ("
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS je oblĂ­benĂœ protokol pro sdĂ­lenĂ­ souborĆŻ pƙes sĂ­tě TCP/IP.\n"
-"Tato sluĆŸba poskytuje NFS server, jehoĆŸ nastavenĂ­ je v /etc/exports."
+msgid "Cpuid level"
+msgstr "Cpuid Ășroveƈ"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktivuje či deaktivuje vĆĄechny sĂ­Ć„ovĂĄ rozhranĂ­, kterĂĄ majĂ­ nastartovat pƙi\n"
-"startu systému."
+msgid "Mongolian (cyrillic)"
+msgstr "Mongolské (cyrilice)"
-#: ../../services.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Pƙipojuje a odpojuje vĆĄechny sĂ­Ć„ovĂ© (NFS), SMB (Lan/Windows) a Netware "
-"(NCP)\n"
-"pƙípojnĂ© body (mount points)."
+msgid "Add a module"
+msgstr "Pƙidat modul"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) je domĂ©novĂœ (DNS) server, kterĂœ pƙeklĂĄdĂĄ hostitelskĂĄ jmĂ©na na "
-"IP adresy."
+msgid "Profile to delete:"
+msgstr "Smazat profil:"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server pouĆŸĂ­vanĂœ pro sestavenĂ­ vysoce vĂœkonnĂ©ho\n"
-"a dostupného serveru."
+msgid "Local measure"
+msgstr "Lokální měƙítko"
-#: ../../services.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd je tiskovĂœ dĂ©mon, bez kterĂ©ho nebude fungovat lpr (program pro tisk).\n"
-"Je to server, kterĂœ posĂ­lĂĄ tiĆĄtěnĂ© dokumenty jednotlivĂœm tiskĂĄrnĂĄm."
+msgid "busmouse"
+msgstr "Busmouse"
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"LinuxConf provĂĄdĂ­ rĆŻznĂ© Ășkoly pƙi spuĆĄtěnĂ­ systĂ©mu\n"
-"nutné pro språvu systémové konfigurace."
+msgid "Account Login (user name)"
+msgstr "VĂĄĆĄ Ășčet (uĆŸivatelskĂ© jmĂ©no)"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Automatická detekce a konfigurace hardware pƙi spuơtění."
+msgid "Fdiv bug"
+msgstr "Fdiv chyba"
-#: ../../services.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
msgstr ""
-"Automatická generace hlavičky jádra v adresáƙi /boot\n"
-"pro soubory /usr/include/linux/{autoconf,version}.h"
+"NastavenĂ­ aplikace drakfirewall\n"
+"\n"
+"PƙedtĂ­m, neĆŸ budete pokračovat, se ujistěte, ĆŸe jste nastavili vaĆĄi\n"
+"sĂ­Ć„ a pƙístup k Internetu pomocĂ­ aplikace drakconnect."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Tento balíček nahraje zvolenou mapu klávesnice definovanou\n"
-"v /etc/sysconfig/keyboard. Tu lze vybrat pomocĂ­ nĂĄstroje kbdconfig.\n"
-"Pro větơinu počítačƯ byste ji měli nechat zapnutou."
+msgid "Benin"
+msgstr "Benin"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Spustit paketovĂœ filtr pro jĂĄdra ƙady 2.2, kterĂœ chrĂĄnĂ­ počítač\n"
-"proti ĂștokĆŻm ze sĂ­tě."
+msgid "Uruguay"
+msgstr "Uruguay"
-#: ../../services.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"InternetovĂœ superserver dĂ©mon (nazĂœvanĂœ inetd) spouĆĄtĂ­ mnoho ostatnĂ­ch\n"
-"internetovĂœch sluĆŸeb, tak jak jsou zapotƙebĂ­. OdpovĂ­dĂĄ za start napƙ.\n"
-"telnetu, ftp, rsh a rlogin. Pokud vypnete inetd, vypnete tĂ­m i ostatnĂ­\n"
-"sluĆŸby kterĂ© spouĆĄtĂ­."
+msgid "Path selection"
+msgstr "VĂœběr cesty"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr "Apache je WWW server. Je pouĆŸĂ­vĂĄn k poskytovĂĄnĂ­ HTML a CGI souborĆŻ."
+msgid "Name/IP address of host:"
+msgstr "Název/IP adresa počítače:"
-#: ../../services.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake testuje hardware a umoĆŸĆˆuje novĂœ/změněnĂœ\n"
-"hardware nastavit"
+msgid "Monitor: %s\n"
+msgstr "Monitor: %s\n"
-#: ../../services.pm:1
+#: ../../partition_table/raw.pm:1
#, c-format
msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
msgstr ""
-"GPM pƙidĂĄvĂĄ do textovĂœch programĆŻ podporu myĆĄi (napƙ pro Midnight "
-"Commander).\n"
-"MĆŻĆŸe takĂ© v konzoli provĂĄdět operace 'vyjmi' a 'vloĆŸ' a ovlĂĄdat pop-up menu."
+"Něco ĆĄpatnĂ©ho se stalo s pevnĂœm diskem. \n"
+"Test na integritu dat selhal. \n"
+"To znamenĂĄ, ĆŸe zĂĄpis na tento disk mĆŻĆŸe skončit nepƙedvĂ­daně a poĆĄkodit data."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron je standardnĂ­ UnixovĂœ program kterĂœ spouĆĄtĂ­ uĆŸivatelem zadanĂ© programy\n"
-"v pƙedem definovanĂœch intervalech. vixie cron mĂĄ navĂ­c mnoho vlastnostĂ­,\n"
-"včetně vyĆĄĆĄĂ­ bezpečnosti a vĂ­ce moĆŸnostĂ­ nastavenĂ­."
+msgid "Printer host name or IP missing!"
+msgstr "ChybĂ­ nĂĄzev nebo IP adresa tiskĂĄrny!"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"SpouĆĄtĂ­ pƙíkazy naplĂĄnovanĂ© pƙíkazem na určitĂœ čas pƙíkazem 'at'.\n"
-"TakĂ© spouĆĄtĂ­ pƙíkazy pƙi nĂ­zkĂ©m vytĂ­ĆŸenĂ­ systĂ©mu."
+msgid "Please check all users that you want to include in your backup."
+msgstr "Zvolte prosĂ­m vĆĄechny uĆŸivatele, kterĂ© chcete zĂĄlohovat."
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
msgstr ""
-"apmd je pouĆŸĂ­vĂĄn pro sledovĂĄnĂ­ stavu baterie a zaznamenĂĄvĂĄnĂ­ pƙes syslog.\n"
-"MĆŻĆŸe takĂ© bĂœt pouĆŸit pro vypnutĂ­ počítače pƙi vybitĂ© baterii."
-
-#: ../../services.pm:1
-#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron - spouĆĄtĂ­ opakujĂ­cĂ­ se akce"
+"Skener %s musĂ­ bĂœt nastaven pomocĂ­ nĂĄstroje PrinterDrake.\n"
+"Spustit PrinterDrake lze z ovlĂĄdacĂ­ho centra Mandrake v sekci Hardware"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Spustit zvukovĂœ systĂ©m ALSA (Advanced Linux Sound Architecture)"
+msgid "Bangladesh"
+msgstr "Bangladéƥ"
-#: ../../standalone.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Installing packages..."
-msgstr "Instaluji balíčky..."
+msgid "Japan (cable)"
+msgstr "Japonsko (kabel)"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
"\n"
-"PouĆŸitĂ­: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+"VĂ­tejte v PrĆŻvodci nastavenĂ­m tiskĂĄrny\n"
+"\n"
+"Tento prĆŻvodce vĂĄm pomĆŻĆŸe nainstalovat vaĆĄi tiskĂĄrnu nebo tiskĂĄrny pƙipojenĂ© "
+"k tomuto počítači, pƙímo k sĂ­ti, nebo sdĂ­lenĂ© na počítači s Windows.\n"
+"\n"
+"Pokud mĂĄte tiskĂĄrnu nebo tiskĂĄrny pƙipojenĂ© k tomuto počítači, zapojte je "
+"prosĂ­m a zapněte je; pak mohou bĂœt automaticky nalezeny. VaĆĄe sĂ­Ć„ovĂ© "
+"tiskĂĄrny nebo tiskĂĄrny sdĂ­lenĂ© počítači s Windows musĂ­ bĂœt rovnÄ›ĆŸ zapnuty a "
+"pƙipojenĂ© k sĂ­ti, majĂ­-li bĂœt automaticky nalezeny.\n"
+"\n"
+"AutomatickĂĄ detekce tiskĂĄren pƙipojenĂœch k sĂ­ti probĂ­hĂĄ podstatně dĂ©le neĆŸ "
+"automatickĂĄ detekce tiskĂĄren pouze lokĂĄlně pƙipojenĂœch k tomuto počítači. "
+"Pokud nepotƙebujete automatickou detekci tiskáren na síti, nebo tiskáren "
+"sdĂ­lenĂœch počítači s Windows, pak tuto autodetekci vypněte.\n"
+"\n"
+"Pokud jste pƙipraveni, klepněte na tlačítko \"Dále\", nebo klepněte na "
+"tlačítko \"Zruơit\" pokud nechcete v tuto chvíli tiskárny nastavovat."
-#: ../../standalone.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
-msgstr ""
-" [vĆĄechno]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
+msgid "Initial tests"
+msgstr "Úvodní testy"
-#: ../../standalone.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+msgid "Continue"
+msgstr "Pokračovat"
-#: ../../standalone.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
+msgid "Custom Restore"
+msgstr "VlastnĂ­ obnova"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
msgstr ""
-"[VOLBY]...\n"
-" -no-confirmation nepotvrzuje prvnĂ­ otĂĄzku v reĆŸimu MandrakeUpdate\n"
-" --no-verify-rpm neprovádí ověƙení podpisu u balíčkƯ\n"
-" --changelog-first v okně s popisem nejdƙíve zobrazí changelog pƙed "
-"seznamem souborĆŻ\n"
-" --merge-all-rpmnew navrhne spojit vƥechny nalezené soubory .rpmnew/."
-"rpmsave"
+"\"Zvuková karta\": pokud je detekována v počítači zvuková karta, je zde\n"
+"zobrazena. Pokud ale vidĂ­te, ĆŸe zobrazenĂĄ karta nenĂ­ pƙesně tak, kterou\n"
+"mĂĄte v počítači, mĆŻĆŸete klepnutĂ­m na tlačítko vybrat jinou kartu a ovladač."
-#: ../../standalone.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "Script-based"
+msgstr "Podle scĂ©náƙe"
-#: ../../standalone.pm:1
+#: ../../install_any.pm:1 ../../partition_table.pm:1
#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
-msgstr ""
-"[VOLBY]\n"
-"SĂ­Ć„ & pƙipojenĂ­ k Internetu a monitorovĂĄnĂ­ aplikacĂ­\n"
-"\n"
-"--defaultintf interface: zobrazĂ­ vĆŸdy toto rozhranĂ­\n"
-"--connect : pokud není pƙipojeno, provede pƙipojení k internetu\n"
-"--disconnect : pokud je pƙipojeno, provede odpojení od internetu\n"
-"--force : pouĆŸĂ­vĂĄ se s (pƙi)odpojenĂ­m : vynutĂ­ (pƙi)odpojenĂ­.\n"
-"--status : vrátí 1 pokud je pƙipojeno, jinak vrací 0 a skončí.\n"
-"--quiet : tichĂœ reĆŸim. PouĆŸĂ­vĂĄ se pƙi (pƙi)odpojovĂĄnĂ­."
+msgid "Error reading file %s"
+msgstr "Chyba pƙi čtení souboru %s"
-#: ../../standalone.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgid "PLL setting:"
+msgstr "NastavenĂ­ PLL :"
-#: ../../standalone.pm:1
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
#, c-format
-msgid "[keyboard]"
-msgstr "[klĂĄvesnice]"
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "MusĂ­te mĂ­t FAT oddĂ­l pƙipojenĂœ na /boot/efi"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
-msgstr ""
-"[VOLBY]\n"
-"NastavenĂ­ pro Mandrake Terminal Server (MTS)\n"
-"--enable : povolĂ­ MTS\n"
-"--disable : zakĂĄĆŸe MTS\n"
-"--start : spustĂ­ MTS\n"
-"--stop : ukončí MTS\n"
-"--adduser : pƙidĂĄ existujĂ­cĂ­ho uĆŸivatele do MTS (vyĆŸaduje jmĂ©no "
-"uĆŸivatele)\n"
-"--deluser : odebere existujĂ­cĂ­ho uĆŸivatele z MTS (vyĆŸaduje jmĂ©no "
-"uĆŸivatele)\n"
-"--addclient : pƙidĂĄ klienta do MTS (vyĆŸaduje MAC adresu, IP, nĂĄzev nbi "
-"obrazu)\n"
-"--delclient : odebere klienta z MTS (vyĆŸaduje MAC address, IP, nĂĄzev "
-"nbi obrazu)"
+msgid " on "
+msgstr " na "
-#: ../../standalone.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
-msgstr ""
-"Import fontĆŻ a monitoring aplikacĂ­\n"
-"--windows_import : provede import ze vĆĄech dostupnĂœch oddĂ­lĆŻ s Windows.\n"
-"--xls_fonts : zobrazĂ­ vĆĄechny fonty, kterĂ© jiĆŸ z xls existujĂ­\n"
-"--strong : silnĂĄ verifikace fontĆŻ.\n"
-"--install : akceptuje libovolnĂœ font z libovolnĂ©ho adresáƙe.\n"
-"--uninstall : odinstaluje libovolnĂœ font nebo libovolnĂœ adresáƙ s "
-"fonty.\n"
-"--replace : nahradĂ­ jiĆŸ existujĂ­cĂ­ fonty\n"
-"--application : 0 ĆŸĂĄdnĂĄ aplikace.\n"
-" : 1 vƥechny dostupné podporované aplikace.\n"
-" : nazev_aplikace jako napƙ. so pro staroffice \n"
-" : a gs pro ghostscript."
+msgid "The URL must begin with http:// or https://"
+msgstr "URL musí začínat znaky http:// nebo https://"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
msgstr ""
-"[VOLBY] [NAZEV_PROGRAMU]\n"
-"\n"
-"[VOLBY]:\n"
-" --help - vypíơe tuto nápovědu.\n"
-" --report - program mĆŻĆŸe bĂœt libovolnĂœ mandrake nĂĄstroj\n"
-" --incident - program mĆŻĆŸe bĂœt libovolnĂœ mandrake nĂĄstroj"
+"Zde lze pƙímo zadat URI pro pƙístup k tiskárně. URI musí splƈovat buď "
+"specifikaci CUPS nebo Foomatic. TakĂ© pamatujte na to, ĆŸe vĆĄechny URI nejsou "
+"podporovĂĄny ve vĆĄech tiskovĂœch sprĂĄvcĂ­ch."
+
+#: ../../any.pm:1
+#, c-format
+msgid "Other OS (SunOS...)"
+msgstr "JinĂœ systĂ©m (SunOs...)"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Install/Upgrade"
+msgstr "Instalace/Aktualizace"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "%d packages"
+msgstr "%d balíčkƯ(y)"
#: ../../standalone.pm:1
#, c-format
@@ -7328,4852 +6844,5304 @@ msgstr ""
"--help : zobrazĂ­ tuto zprĂĄvu.\n"
"--version : zobrazí číslo verze.\n"
-#: ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Domain Authentication Required"
+msgstr "VyĆŸadovĂĄno OvěƙenĂ­ DomĂ©ny"
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
msgstr ""
-"Tento program je svobodnĂœ software; mĆŻĆŸete ho ơíƙit a/nebo modifikovat\n"
-"podle specifikace GNU General Public Licence, kterĂĄ byla publikovĂĄna\n"
-"Free Software Foundation; buď verze 2, nebo (podle volby) pozdějơí verze.\n"
"\n"
-"Tento program je distribuovĂĄn s nadějĂ­, ĆŸe bude uĆŸitečnĂœ,\n"
-"ale BEZ JAKÝCHKOLIV ZÁRUK; BEZ NÁROKU NA PROFIT. Více detailƯ naleznete\n"
-"v licenci GNU General Public Licence.\n"
"\n"
-"Kopii GNU General Public Licence mĆŻĆŸete obdrĆŸet buď s tĂ­mto programem\n"
-"nebo si o nĂ­ mĆŻĆŸete napsat na adresu Free Software Foundation, Inc.,\n"
-"59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Exit install"
-msgstr "Ukončení instalace"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Install updates"
-msgstr "Aktualizace systému"
+" Poděkování:\n"
+"\t- LTSP Projekt http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
-#: ../../steps.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Configure services"
-msgstr "NastavenĂ­ sluĆŸeb"
+msgid "Costa Rica"
+msgstr "Costa Rica"
-#: ../../steps.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Configure X"
-msgstr "NastavenĂ­ X"
+msgid "Use libsafe for servers"
+msgstr "PouĆŸĂ­t libsafe pro servery"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Install bootloader"
-msgstr "Zaváděcí program"
+msgid "Icelandic"
+msgstr "Islandské"
-#: ../../steps.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Configure networking"
-msgstr "NastavenĂ­ sĂ­tĂ­"
+msgid ""
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
+"\n"
+"PouĆŸitĂ­: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
-#: ../../steps.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Add a user"
-msgstr "PƙidĂĄnĂ­ uĆŸivatele"
+msgid "Please relog into %s to activate the changes"
+msgstr "Pro aktivaci změn se prosím znovu pƙihlaste na %s"
-#: ../../steps.pm:1
+#: ../../my_gtk.pm:1
#, c-format
-msgid "Root password"
-msgstr "HlavnĂ­(root) heslo"
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-2,*-r-*"
-#: ../../steps.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Install system"
-msgstr "Instalace systému"
+msgid "Lilo/grub mode"
+msgstr "ReĆŸim Lilo/Grub"
-#: ../../steps.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Choose packages to install"
-msgstr "VĂœběr balíčkĆŻ pro instalaci"
+msgid "Output"
+msgstr "VĂœstup"
-#: ../../steps.pm:1
+#: ../../loopback.pm:1
#, c-format
-msgid "Format partitions"
-msgstr "FormĂĄtovĂĄnĂ­ oddĂ­lĆŻ"
+msgid "Circular mounts %s\n"
+msgstr "PropletenĂ© pƙípojnĂ© body %s\n"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Partitioning"
-msgstr "Rozdělení disku"
+msgid "Martinique"
+msgstr "Martinique"
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose your keyboard"
-msgstr "VĂœběr klĂĄvesnice"
+msgid "HardDrive / NFS"
+msgstr "PevnĂœ disk / NFS"
-#: ../../steps.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Select installation class"
-msgstr "Volba typu instalace"
+msgid "a number"
+msgstr "číslo"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Hard drive detection"
-msgstr "Detekce pevnĂœch diskĆŻ"
+msgid "Swedish"
+msgstr "Ơvédské"
-#: ../../steps.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Configure mouse"
-msgstr "NastavenĂ­ myĆĄi"
+msgid "Which %s driver should I try?"
+msgstr "KterĂœ %s ovladač mĂĄm zkusit?"
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "License"
-msgstr "Licence"
+msgid ""
+"You will receive an alert if one of the selected services is no longer "
+"running"
+msgstr "Pokud jedna z vybranĂœch sluĆŸeb nepobÄ›ĆŸĂ­, obdrĆŸĂ­te varovnou zprĂĄvu"
-#: ../../steps.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Language"
-msgstr "VĂœběr jazyka"
+msgid "Filesystem types:"
+msgstr "Souborové systémy:"
-#: ../../ugtk2.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "utopia 25"
-msgstr "utopia 25"
+msgid ", multi-function device on HP JetDirect"
+msgstr ", multifunkční zaƙízení na HP JetDirect"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "OK"
-msgstr "OK"
+msgid "Northern Mariana Islands"
+msgstr "Northern Mariana Islands"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "logdrake"
-msgstr "logdrake"
+msgid "none"
+msgstr "ĆœĂĄdnĂĄ"
-#: ../../ugtk.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-2,*-r-*"
+msgid "user :"
+msgstr "uĆŸivatel :"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (instalační ovladač pro obrazovku)"
+msgid "Please enter your password"
+msgstr "Zadejte své heslo"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
msgstr ""
-"S XFree %s mĆŻĆŸe vaĆĄe karta vyuĆŸĂ­t 3D hardwarovĂ© akcelerace.\n"
-" TOTO JE POUZE EXPERIMENTÁLNÍ VERZE, A MĆźĆœE VÉST K NESTABILITĚ SYSTÉMU."
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s s EXPERIMENTÁLNÍ 3D hardwarovou akcelerací"
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "S XFree %s mĆŻĆŸe vaĆĄe karta vyuĆŸĂ­t 3D hardwarovĂ© akcelerace."
+"Zadejte nĂĄzev vytváƙenĂ©ho profilu (novĂœ profil je vytvoƙen jako kopie "
+"vybraného) :"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s s hardwarovou 3D akceleracĂ­"
+msgid "Floppy"
+msgstr "Disketa"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"VaĆĄe karta podporuje 3D akceleraci, ale pouze s XFree %s,\n"
-"TOTO JE POUZE EXPERIMENTÁLNÍ VERZE, A MĆźĆœE VÉST K NESTABILITĚ SYSTÉMU.\n"
-"VaĆĄe karta je podporovĂĄna i v XFree %s, kde mĆŻĆŸe mĂ­t lepĆĄĂ­ podporu pro 2D."
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "Zatrhněte, pokud chcete vaĆĄe CDRW mĂ©dium smazat (pƙi prvnĂ­m sezenĂ­)"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"VaĆĄe karta podporuje 3D akceleraci, ale pouze s XFree %s.\n"
-"Pokud pouĆŸijete XFree %s, mĆŻĆŸete na druhou stranu dosĂĄhnout lepĆĄĂ­ch vĂœsledkĆŻ "
-"ve 2D."
+msgid "Ghostscript referencing"
+msgstr "Odkazy na Ghostscript"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
+msgid "Bootloader"
+msgstr "Zaváděcí program"
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Konfigurovat pouze kartu \"%s\"%s"
+msgid "Move"
+msgstr "Pƙesunout"
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Use Xinerama extension"
-msgstr "PouĆŸĂ­t rozơíƙenĂ­ Xinerama"
+msgid "Bootloader to use"
+msgstr "Zaváděcí program"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configure all heads independently"
-msgstr "Konfigurovat vĆĄechny monitory nezĂĄvisle"
+msgid "SMB server host"
+msgstr "NĂĄzev SMB serveru"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "KterĂ© XFree by jste chtěli pouĆŸĂ­t?"
+msgid "Name Servers:"
+msgstr "Jmenné servery:"
-#: ../../Xconfig/card.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "XFree configuration"
-msgstr "NastavenĂ­ XFree"
+msgid ""
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
+msgstr ""
+"\n"
+"VarovĂĄnĂ­\n"
+"\n"
+"Pƙečtěte si prosím pozorně následující termíny. Pokud s nimi nesouhlasíte,\n"
+"nejste oprávněn pokračovat v instalaci následujícím CD. Stiskněte\n"
+"\"OdmĂ­tnout\" pro pokračovĂĄnĂ­ v instalaci bez tohoto mĂ©dia.\n"
+"\n"
+"\n"
+"NěkterĂ© programy na dalĆĄĂ­m CD mĂ©diu nejsou ơíƙeny podle licence GPL či\n"
+"podobnĂ©. KaĆŸdĂœ z těchto programĆŻ je ơíƙen podle vlastnĂ­ licence a podmĂ­nek.\n"
+"Čtete pozorně tyto licence a podmĂ­nky pƙed tĂ­m, neĆŸ začnete danĂœ software\n"
+"pouĆŸĂ­vat nebo ơíƙit.\n"
+"NěkterĂ© licence zakazujĂ­ pƙenĂĄĆĄenĂ­, vytváƙenĂ­ duplikĂĄtĆŻ (mimo zĂĄloĆŸnĂ­ "
+"kopii),\n"
+"dalơí ơíƙení, dekompilaci, reverzní engineering nebo modifikaci komponent.\n"
+"KaĆŸdĂ© poruĆĄenĂ­ podmĂ­nek okamĆŸitě pƙeruĆĄuje vaĆĄe prĂĄva podle danĂ© licence.\n"
+"I kdyĆŸ danĂ© licence dĂĄvajĂ­ nějakĂĄ prĂĄva, nenĂ­ dovoleno instalovat danĂœ\n"
+"program na vĂ­ce systĂ©mĆŻ, pƙizpĆŻsobovat ho provozu na sĂ­ti. V pƙípadě\n"
+"pochybnostĂ­ kontaktujte distributora nebo vĂœrobce danĂ©ho programu.\n"
+"Pƙenechání práv tƙetím osobám nebo kopírování části komponent či\n"
+"dokumentace je také zakåzåno.\n"
+"\n"
+"\n"
+"VĆĄechna prĂĄva na programy na dalĆĄĂ­m CD mĂ©diu patƙí jejĂ­m prĂĄvoplatnĂœm\n"
+"vlastníkƯm podle autorského zåkona.\n"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Kolik paměti je na vaĆĄĂ­ grafickĂ© kartě ?"
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Odebrat tiskĂĄrnu ze Star Office/OpenOffice.org/GIMP"
-#: ../../Xconfig/card.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
msgstr ""
-"Våƥ systém podporuje zobrazení na dvou monitorech.\n"
-"Co chcete dělat?"
+"Linux Virtual Server pouĆŸĂ­vanĂœ pro sestavenĂ­ vysoce vĂœkonnĂ©ho\n"
+"a dostupného serveru."
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Multi-head configuration"
-msgstr "Konfigurace dvou monitorĆŻ"
+msgid "4 billion colors (32 bits)"
+msgstr "4 miliardy barev (32 bitĆŻ)"
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose an X server"
-msgstr "Zvolte X server"
+msgid "Micronesia"
+msgstr "Mikronésie"
-#: ../../Xconfig/card.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "X server"
-msgstr "X server"
+msgid "License"
+msgstr "Licence"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "64 MB or more"
-msgstr "64 MB nebo vĂ­ce"
+msgid "This may take a moment to generate the keys."
+msgstr "GenerovĂĄnĂ­ klíčƯ mĆŻĆŸe chvĂ­li trvat."
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "32 MB"
-msgstr "32 MB"
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgstr "Autodetekce tiskĂĄrny (lokĂĄlnĂ­, TCP/soket, a tiskĂĄrny SMB)"
-#: ../../Xconfig/card.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "16 MB"
-msgstr "16 MB"
+msgid "Sagem (using pppoa) usb"
+msgstr "Sagem (pomocĂ­ pppoa) usb"
-#: ../../Xconfig/card.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "8 MB"
-msgstr "8 MB"
+msgid ""
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
+msgstr ""
+"Stala se chyba - nebylo nalezeno ĆŸĂĄdnĂ© zaƙízenĂ­ na kterĂ©m by se daly "
+"vytvoƙit novĂ© souborovĂ© systĂ©my. Zkontrolujte prosĂ­m hardware"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "4 MB"
-msgstr "4 MB"
+msgid "Starting the printing system at boot time"
+msgstr "Spustit tiskovĂœ systĂ©m pƙi startu systĂ©mu"
-#: ../../Xconfig/card.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "2 MB"
-msgstr "2 MB"
+msgid "Do you want to start the connection at boot?"
+msgstr "Chcete se automaticky pƙipojovat po startu počítače?"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "1 MB"
-msgstr "1 MB"
+msgid "Processor ID"
+msgstr "ID procesoru"
-#: ../../Xconfig/card.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "512 kB"
-msgstr "512 kB"
+msgid "Sound trouble shooting"
+msgstr "Ƙeƥení problémƯ se zvukem"
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "256 kB"
-msgstr "256 kB"
+msgid "Polish (qwerty layout)"
+msgstr "PolskĂ© (rozloĆŸenĂ­ QWERTY)"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "activate now"
+msgstr "aktivovat nynĂ­"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
"\n"
-"%s"
+"Drakbackup activities via CD:\n"
+"\n"
msgstr ""
-"Zachovat změny?\n"
-"AktuĂĄlnĂ­ konfigurace je:\n"
"\n"
-"%s"
+"Aktivity programu DrakBackup skrze CD:\n"
+"\n"
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Options"
-msgstr "Volby"
+msgid ""
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
+msgstr ""
+"PokouĆĄĂ­te se instalovat tiskovĂœ systĂ©m %s na počítač, bÄ›ĆŸĂ­cĂ­ v bezpečnostĂ­ "
+"Ășrovni %s.\n"
+"\n"
+"TiskovĂœ systĂ©m pracuje jako dĂ©mon (proces na pozadĂ­), kterĂœ čekĂĄ na tiskovĂ© "
+"Ășlohy a zpracovĂĄvĂĄ je. Tento dĂ©mon je takĂ© pƙístupnĂœ ze sĂ­tě pro jinĂ© "
+"počítače, takĆŸe se mĆŻĆŸe stĂĄt pƙedmětem sĂ­Ć„ovĂ©ho Ăștoku. Proto je vybrĂĄno "
+"pouze několik sluĆŸeb, kterĂ© jsou v tĂ©to Ășrovni spuĆĄtěny automaticky pƙi "
+"startu.\n"
+"\n"
+"Chcete opravdu nastavit tiskovĂœ systĂ©m na tomto počítači?"
-#: ../../Xconfig/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Test"
-msgstr "Test"
+msgid "Host \"%s\", port %s"
+msgstr "Počítač \"%s\", port %s"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Resolution"
-msgstr "RozliĆĄenĂ­"
+msgid "This partition can't be used for loopback"
+msgstr "Tento oddĂ­l nemĆŻĆŸe bĂœt pouĆŸit pro loopback"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Monitor"
-msgstr "Monitor"
+msgid "File already exists. Use it?"
+msgstr "Soubor uĆŸ existuje. MĂĄm ho pouĆŸĂ­t?"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Graphic Card"
-msgstr "GrafickĂĄ karta"
+msgid "received: "
+msgstr "pƙijato: "
-#: ../../Xconfig/monitor.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Vertical refresh rate"
-msgstr "VertikĂĄlnĂ­(obrazovkovĂĄ) synchronizace"
+msgid "Right Alt key"
+msgstr "PravĂĄ klĂĄvesa Alt"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Horizontální(ƙádková) synchronizace"
+msgid "the list of alternative drivers for this sound card"
+msgstr "seznam alternativních ovladačƯ pro vaơi zvukovou kartu"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Dva rozhodujĂ­cĂ­ parametry jsou: vertikĂĄlnĂ­ synchronizačnĂ­ frekvence, coĆŸ je\n"
-"frekvence, kterou je obnovovĂĄna celĂĄ obrazovka, a frekvence ƙádkovĂ©\n"
-" synchronizace (horiz. sync. rate), coĆŸ je frekvence jakou jsou zobrazovĂĄny\n"
-"jednotlivĂ© mikroƙádky (scanline).\n"
-"\n"
-"Je VELMI DĆźLEĆœITÉ abyste nezvolili typ monitoru se schopnostmi vyĆĄĆĄĂ­mi neĆŸ "
-"mĂĄ\n"
-"vĂĄĆĄ monitor, protoĆŸe byste si ho tĂ­m mohli poĆĄkodit. JestliĆŸe si nejste "
-"jistĂ­\n"
-"zvolte raději typ s niĆŸĆĄĂ­mi schopnostmi."
+msgid "Gateway"
+msgstr "BrĂĄna(gateway)"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr "Plug'n Play detekce selhala. Vyberte prosĂ­m pƙesnĂœ monitor"
+msgid "Scanner sharing"
+msgstr "SdĂ­lenĂ­ skeneru"
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Vendor"
-msgstr "Dodavatel"
+msgid "Tonga"
+msgstr "Tonga"
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Plug'n Play"
-msgstr "Plug'n Play"
+msgid "Tunisia"
+msgstr "Tunisko"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose a monitor"
-msgstr "Zvolte typ monitoru"
+msgid "Profile: "
+msgstr "Profil: "
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Graphics card: %s"
-msgstr "GrafickĂĄ karta: %s"
+msgid ""
+"Click on a device in the left tree in order to display its information here."
+msgstr ""
+"Klepněte na zaƙízenĂ­ v levĂ© části stromu a zobrazĂ­te zde o něm informace."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Vyberte si rozliĆĄenĂ­ a barevnou hloubku"
+msgid "XawTV isn't installed!"
+msgstr "Aplikace XawTV nenĂ­ nainstalovanĂĄ!"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Resolutions"
-msgstr "RozliĆĄenĂ­"
+msgid ""
+"Create/Transfer\n"
+"backup keys for SSH"
+msgstr ""
+"Vytvoƙit/PƙenĂ©st\n"
+"zĂĄloĆŸnĂ­ klíče pro SSH"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 miliardy barev (32 bitĆŻ)"
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr "Nezahrnout kritické soubory (passwd, group, fstab)"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 miliĂłnĆŻ barev (24 bitĆŻ)"
+msgid "old static device name used in dev package"
+msgstr "starĂœ, statickĂœ nĂĄzev zaƙízenĂ­, kterĂœ se pouĆŸĂ­vĂĄ v balíčku dev"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tisĂ­c barev (16 bitĆŻ)"
+msgid "This label is already used"
+msgstr "Tato značka se jiĆŸ pouĆŸĂ­vĂĄ"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tisĂ­c barev (15 bitĆŻ)"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"VĂ­tejte v PrĆŻvodci nastavenĂ­m tiskĂĄrny\n"
+"\n"
+"Tento prĆŻvodce vĂĄm pomĆŻĆŸe nainstalovat vaĆĄi tiskĂĄrnu nebo tiskĂĄrny pƙipojenĂ© "
+"k tomuto počítači nebo pƙímo k síti.\n"
+"\n"
+"Pokud mĂĄte tiskĂĄrnu nebo tiskĂĄrny pƙipojenĂ© k tomuto počítači, zapojte je "
+"prosĂ­m a zapněte je; pak mohou bĂœt automaticky nalezeny. VaĆĄe sĂ­Ć„ovĂ© "
+"tiskĂĄrny musĂ­ bĂœt rovnÄ›ĆŸ zapnuty a pƙipojenĂ© k sĂ­ti, majĂ­-li bĂœt automaticky "
+"nalezeny.\n"
+"\n"
+"AutomatickĂĄ detekce tiskĂĄren pƙipojenĂœch k sĂ­ti probĂ­hĂĄ podstatně dĂ©le neĆŸ "
+"automatickĂĄ detekce tiskĂĄren pouze lokĂĄlně pƙipojenĂœch k tomuto počítači. "
+"Pokud nepotƙebujete automatickou detekci tiskáren na síti, pak tuto "
+"autodetekci vypněte.\n"
+"\n"
+"Pokud jste pƙipraveni, klepněte na tlačítko \"Dále\", nebo klepněte na "
+"tlačítko \"Zruơit\" pokud nechcete v tuto chvíli tiskárny nastavovat."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 barev (8 bitĆŻ)"
+msgid "After formatting partition %s, all data on this partition will be lost"
+msgstr "KdyĆŸ naformĂĄtujete oddĂ­l %s, ztratĂ­te tĂ­m vĆĄechna jeho data"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Is this the correct setting?"
-msgstr "Je toto språvné nastavení?"
+msgid "Connection Time: "
+msgstr "Doba pƙipojení: "
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Test skončí za %d sekund"
+msgid "select perm file to see/edit"
+msgstr "vyberte soubor s oprĂĄvněnĂ­m pro zobrazenĂ­/Ășpravy"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/livedrake:1
#, c-format
msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
-"Vyskytla se chyba:\n"
-"%s\n"
-"Zkuste změnit některĂ© parametry"
-
-#: ../../Xconfig/test.pm:1
-#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "VarovĂĄnĂ­: test na tĂ©to grafickĂ© kartě mĆŻĆŸe zpĆŻsobit zatuhnutĂ­ počítače"
+"VloĆŸte prosĂ­m InstalačnĂ­ CD-ROM do mechaniky a stiskněte Ok.\n"
+"Pokud CD nemĂĄte, stiskněte ZruĆĄit pro pƙeruĆĄenĂ­ aktualizace systĂ©mu."
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Chcete si vyzkouĆĄet nastavenĂ­?"
+msgid "Use group id for execution"
+msgstr "PouĆŸĂ­t pƙi spuĆĄtěnĂ­ ID skupiny"
-#: ../../Xconfig/test.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Test of the configuration"
-msgstr "VyzkouĆĄet nastavenĂ­"
+msgid "Choose the default user:"
+msgstr "Zvolte standardnĂ­ho uĆŸivatele:"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "What norm is your TV using?"
-msgstr "Jakou normu vĂĄĆĄ televizor pouĆŸĂ­vĂĄ?"
+msgid "Gabon"
+msgstr "Gabon"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
msgstr ""
-"Vaơe grafická karta zƙejmě disponuje konektorem pro TV-OUT.\n"
-"Tento konektor mĆŻĆŸe bĂœt zprovozněn pouĆŸitĂ­m tzv. frame bufferu.\n"
"\n"
-"Aby to bylo moĆŸnĂ©, budete muset napojit svou grafickou kartu na televiznĂ­ "
-"pƙijĂ­mač, a to jeĆĄtě neĆŸ zapnete vĂĄĆĄ počítač.\n"
-"PotĂ© vyberte ve vaĆĄem zavaděči poloĆŸku \"TV out\".\n"
-"\n"
-"MĂĄ vaĆĄe karta tuto vlastnost?"
+"V pƙípadě vzdĂĄlenĂ©ho CUPS serveru nemusĂ­te nastavovat tiskĂĄrny zde,\n"
+"tiskĂĄrny budou automaticky detekovĂĄny."
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
msgstr ""
-"MĆŻĆŸu nastavit vĂĄĆĄ počítač tak, aby automaticky spustil X pƙi startu.\n"
-"Chcete aby počítač po zapnutĂ­ spustil grafickĂœ reĆŸim?"
-
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "SpouĆĄtĂ­ se X"
+"Mandrake Linux podporuje vĂ­ce jazykĆŻ. MĆŻĆŸete si zvolit dalĆĄĂ­ jazyky,\n"
+"které budou dostupné po instalaci a nåsledném restartu systému."
-#: ../../Xconfig/various.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 ovladač: %s\n"
+msgid "Domain"
+msgstr "Doména"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 server: %s\n"
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "Pokud je tƙeba, upƙesněte velikost paměti (nalezeno %d MB)"
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "RozliĆĄenĂ­: %s\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
+"\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
+"\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
+msgstr ""
+"LILO a Grub jsou zavaděče systĂ©mu. Tato část je bÄ›ĆŸně plně automatickĂĄ.\n"
+"DrakX analyzuje zaváděcí sektor disku a zachová se podle toho, co zde\n"
+"nalezne:\n"
+"\n"
+" * pokud nalezne zaváděcí sektor Windows, pƙepíơe ho sektorem pro LILO/Grub\n"
+"tak, aby bylo moĆŸnĂ© spouĆĄtět jak systĂ©m Windows tak i Linux;\n"
+"\n"
+" * pokud nalezne zavĂĄděcĂ­ sektor pro LILO nebo Grub, tak jej pƙepĂ­ĆĄe novĂœm.\n"
+"\n"
+"Pokud instalačnĂ­ program nedokĂĄĆŸe rozhodnout, zeptĂĄ se na to, kam mĂĄ "
+"zavaděč\n"
+"umĂ­stit.\n"
+"\n"
+"\"SpouĆĄtěcĂ­ zaƙízenĂ­\": ve větĆĄině pƙípadĆŻ nenĂ­ nutnĂ© měnit vĂœchozĂ­\n"
+"nastavení (\"První sektor disku (MBR)\"), ale zavaděč lze nainstalovat na \n"
+"druhĂœ disk (\"/dev/hdb\") nebo dokonce na disketu (\"Na disketu\")."
-#: ../../Xconfig/various.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Color depth: %s\n"
-msgstr "BarevnĂĄ hloubka: %s\n"
+msgid "Provider dns 2 (optional)"
+msgstr "DNS poskytovatele č.2 (volitelnĂ©)"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "PaměƄ na gr. kartě: %s kB\n"
+msgid "Boot device"
+msgstr "Startovací zaƙízení"
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Graphics card: %s\n"
-msgstr "GrafickĂĄ karta: %s\n"
+msgid "Which partition do you want to resize?"
+msgstr "Na kterĂ©m oddĂ­lu chcete měnit velikost?"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "VertikĂĄlnĂ­ frekvence monitoru: %s\n"
+msgid "United States Minor Outlying Islands"
+msgstr "Spojené ståty (Minor Outlying Islands)"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "HorizontĂĄlnĂ­ frekvence monitoru: %s\n"
+msgid "A tool to monitor your logs"
+msgstr "NĂĄstroj na sledovĂĄnĂ­ logĆŻ"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
+msgid "Djibouti"
+msgstr "DĆŸibuti"
-#: ../../Xconfig/various.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Pƙípojení myơi: %s\n"
+msgid "detected on port %s"
+msgstr "detekovĂĄno na portu %s"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Typ myĆĄi: %s\n"
+msgid "LPD"
+msgstr "LPD"
#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "RozloĆŸenĂ­ klĂĄvesnice: %s\n"
+msgid "Graphics card: %s\n"
+msgstr "GrafickĂĄ karta: %s\n"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Options: %s"
-msgstr "Volby: %s"
+msgid "Yaboot"
+msgstr "Yaboot"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mount point: "
-msgstr "Adresáƙ pƙipojení (mount point): "
+msgid "Please check if you are using a DVDRAM device"
+msgstr "Zvolte pokud pouĆŸĂ­vĂĄte zaƙízenĂ­ DVD-RAM"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Server: "
-msgstr "Server: "
+msgid "Splash selection"
+msgstr "VĂœběr zavĂĄděcĂ­ho obrĂĄzku"
-#: ../../diskdrake/dav.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "URL musí začínat znaky http:// nebo https://"
+msgid "Extended partition not supported on this platform"
+msgstr "RozơíƙenĂ© diskovĂ© oddĂ­ly nejsou na tomto systĂ©mu podporovĂĄny"
-#: ../../diskdrake/dav.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Zadejte prosĂ­m URL serveru WebDAV"
+msgid "ISDN Configuration"
+msgstr "NastavenĂ­ ISDN"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mount point"
-msgstr "PƙípojnĂœ bod"
+msgid "high"
+msgstr "vysokĂĄ"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Server"
-msgstr "Server"
+msgid "Internet Connection Sharing"
+msgstr "SdĂ­lenĂ­ InternetovĂ©ho PƙipojenĂ­"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Mount"
-msgstr "Pƙipojit"
+msgid "Choose file"
+msgstr "Vyberte soubor"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Unmount"
-msgstr "Odpojit"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
+msgstr ""
+"VarovĂĄnĂ­! Bylo nalezeno existujĂ­cĂ­ nastavenĂ­ firewallu. Po instalaci mĆŻĆŸe "
+"bĂœt zapotƙebĂ­ nějakĂĄ ručnĂ­ Ășprava."
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New"
-msgstr "NovĂœ"
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "Tisk/Pƙístup k foto kartám na \"%s\""
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
msgstr ""
-"WebDAV je protokol, kterĂœ umoĆŸĆˆuje pƙipojit webovĂœ adresáƙ jako lokĂĄlnĂ­, "
-"kterĂœ\n"
-"se potom tváƙí jako lokĂĄlnĂ­ souborovĂœ systĂ©m (takovĂœ webovĂœ server musĂ­ "
-"bĂœt)\n"
-"nastaven jako WebDAV server). Pokud chcete pƙidat WebDAV pƙipojení, vyberte\n"
-"poloĆŸku \"NovĂœ\"."
+"Chcete povolit tisk na tiskĂĄrnĂĄch vypsanĂœch vĂœĆĄe nebo na tiskĂĄrnĂĄch v "
+"lokĂĄlnĂ­ sĂ­ti?\n"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use ``%s'' instead"
-msgstr "MĂ­sto toho pouĆŸijte ``%s''"
+msgid "Printer default settings"
+msgstr "VĂœchozĂ­ nastavenĂ­ tiskĂĄrny"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Type"
-msgstr "Změnit typ"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Standardní PS2 myơ s kolečkem"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Nejprve pouĆŸijte ''Odpojit''"
+msgid "Removing old printer \"%s\"..."
+msgstr "OdebĂ­rĂĄm starou tiskĂĄrnu \"%s\"..."
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Delete"
-msgstr "Smazat"
+msgid "Select a device !"
+msgstr "Zvolte zaƙízení !"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create"
-msgstr "Vytvoƙit"
+msgid "Remove selected server"
+msgstr "Odstranit vybranĂœ server"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Filesystem types:"
-msgstr "Souborové systémy:"
+msgid "French Southern Territories"
+msgstr "FrancouzskĂĄ jiĆŸnĂ­ teritoria"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Empty"
-msgstr "PrĂĄzdnĂœ"
+msgid "the vendor name of the processor"
+msgstr "jméno dodavatele procesoru"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Windows"
-msgstr "Windows"
+msgid "All data on this partition should be backed-up"
+msgstr "VĆĄechna data z tohoto oddĂ­lu by měla bĂœt zĂĄlohovĂĄna"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "Installing package %s"
+msgstr "Instaluji balíček %s"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SunOS"
-msgstr "SunOs"
+msgid "Checking device and configuring HPOJ..."
+msgstr "Testuji zaƙízení a nastavuji HPOJ..."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Swap"
-msgstr "OdklĂĄdacĂ­ (swap)"
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
+msgstr ""
+"Abyste mohli mĂ­t vĂ­ce oddĂ­lĆŻ, musĂ­te smazat jeden existujĂ­cĂ­ a na jeho "
+"místě\n"
+"vytvoƙit rozơíƙenĂœ (extended) oddĂ­l"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Journalised FS"
-msgstr "ĆœurnĂĄlovacĂ­ FS"
+msgid ""
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
+msgstr ""
+"VaĆĄe tiskĂĄrna byla automaticky nastavena tak, ĆŸe mĂĄte ze svĂ©ho PC pƙístup ke "
+"čtečce karty. NynĂ­ mĆŻĆŸete pƙistupovat ke svĂœm fotografickĂœm kartĂĄm pomocĂ­ "
+"grafického programu \"MtoolsFM\" (Menu: \"Aplikace\" -> \"Souborové nåstroje"
+"\" -> \"SprĂĄvce souborĆŻ MTools\") nebo z pƙíkazovĂ© ƙádky pomocĂ­ nĂĄstroje "
+"\"mtools\" (zadejte \"man mtools\", chcete-li zĂ­skat vĂ­ce informacĂ­). "
+"SouborovĂœ systĂ©m vaĆĄi karty naleznete pod pĂ­smenem zaƙízenĂ­ \"p:\", pƙípadně "
+"dalơích písmenech, pokud máte více tiskáren HP se čtečkou karet. V programu "
+"\"MtoolsFM\" mĆŻĆŸete pƙepĂ­nat mezi pĂ­smeny zaƙízenĂ­ pomocĂ­ políčka v pravĂ©m "
+"hornĂ­m rohu kaĆŸdĂ©ho vĂœÄtu souborĆŻ."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Ext2"
-msgstr "Ext2"
+msgid "Choose packages to install"
+msgstr "VĂœběr balíčkĆŻ pro instalaci"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No hard drives found"
-msgstr "Nenalezeny ĆŸĂĄdnĂ© pevnĂ© disky!"
+msgid ""
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
+msgstr ""
+"\n"
+" NěkterĂ© chyby pƙi nastavenĂ­ poĆĄty jsou zpĆŻsobeny\n"
+" ơpatnou konfigurací programu postfix. Pro vyƙeơení\n"
+" nastavte myhostname a mydomain v /etc/postfix/main.cf\n"
+"\n"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Please click on a partition"
-msgstr "Prosím klepněte na oddíl"
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr "VƠECHNY diskové oddíly a data na disku %s budou zruƥena"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
msgstr ""
-"MĂĄte jeden velikĂœ oddĂ­l\n"
-"(větĆĄinou pouĆŸĂ­vanĂœ Microsoft Windows).\n"
-"Doporučuji vám nejprve zmenơit tento oddíl\n"
-"(klepněte na něj a potom na \"Změnit velikost\")"
+"Na vaƥem systému není dostatek místa pro instalaci nebo aktualizaci (%d > %d)"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose action"
-msgstr "Co uděláte ?"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
+msgstr ""
+"KaĆŸdĂĄ tiskĂĄrna potƙebuje nĂĄzev (napƙ. \"tiskarna\"). Popis a umĂ­stěnĂ­ nemusĂ­ "
+"bĂœt vyplněny. Jsou to komentáƙe pouze pro uĆŸivatele."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
+msgstr ""
+"\"Tiskárna\": klepnutím na \"Nastavit\" se otevƙe prƯvodce nastavením.\n"
+"Jak nastavit tiskĂĄrnu se takĂ© dozvĂ­te z odpovĂ­dajĂ­cĂ­ kapitoly z pƙíručky\n"
+"\"ZačínĂĄme\". RozhranĂ­ je podobnĂ© tomu, kterĂ© vidĂ­te pƙi instalaci."
+
+#: ../../lang.pm:1
#, c-format
-msgid "Wizard"
-msgstr "PrĆŻvodce"
+msgid "Bhutan"
+msgstr "BhĂștĂĄn"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"JestliĆŸe chcete pouĆŸĂ­vat aboot, musĂ­te nechat volnĂ© mĂ­sto na začátku disku\n"
-"(2048 sektorƯ stačí)"
+msgid "Network interface"
+msgstr "SíƄové rozhraní"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Zálohujte si nejdƙív svá data, prosím"
+msgid "Reading printer data..."
+msgstr "Načítám data k tisku ..."
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Read carefully!"
-msgstr "Čtěte pozorně!"
+msgid "Korean keyboard"
+msgstr "KorejskĂĄ klĂĄvesnice"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Encryption key (again)"
-msgstr "Ơifrovací klíč (znovu)"
+msgid "Not connected"
+msgstr "Nepƙipojen"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Encryption key"
-msgstr "Ơifrovací klíč"
+msgid "Greek"
+msgstr "Ƙecké"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "The encryption keys do not match"
-msgstr "Ơifrovací klíče se neshodují"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
+msgstr ""
+"Argumenty: (arg)\n"
+"\n"
+"Pokud je nastaven \\fIarg\\fP = ALL je povolena existence soubor /etc/issue\n"
+"a /etc/issue.net. Pokud je nastaven \\fP = NONE nenĂ­ povolen ĆŸĂĄdnĂœ\n"
+"soubor /etc/issue."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
+msgid "Saint Kitts and Nevis"
+msgstr "Saint Kitts a Nevis"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
msgstr ""
-"Tento ĆĄifrovacĂ­ klíč je pƙíliĆĄ jednoduchĂœ (musĂ­ bĂœt alespoƈ %d znakĆŻ dlouhĂœ)"
+"Pƙenos ĂșspěơnĂœ!\n"
+"MoĆŸnĂĄ budete chtĂ­t zkontrolovat, zda se mĆŻĆŸete pƙihlĂĄsit na server:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"bez dotazu na heslo."
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "Vyberte si ĆĄifrovacĂ­ klíč pro souborovĂœ systĂ©m"
+msgid "Enable OF Boot?"
+msgstr "Povolit zavaděč OF?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Filesystem encryption key"
-msgstr "Klíč pro ĆĄifrovanĂœ souborovĂœ systĂ©m"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "NemĆŻĆŸete pouĆŸĂ­t JFS pro oddĂ­l menĆĄĂ­ neĆŸ 16MB"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Type: "
-msgstr "Typ: "
+msgid "Monitor VertRefresh: %s\n"
+msgstr "VertikĂĄlnĂ­ frekvence monitoru: %s\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "on channel %d id %d\n"
-msgstr "na kanĂĄle %d id %d\n"
+msgid "path"
+msgstr "cesta"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Typ tabulky oddĂ­lĆŻ: %s\n"
+msgid "Mount point"
+msgstr "PƙípojnĂœ bod"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM disky %s\n"
+msgid ""
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
+msgstr ""
+"Vyskytla se chyba:\n"
+"%s\n"
+"Zkuste změnit některĂ© parametry"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Info: "
-msgstr "Informace: "
+msgid "Restore system"
+msgstr "Obnovit systém"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrie: %s cylindrĆŻ, %s hlav, %s sektorĆŻ\n"
+msgid ""
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
+msgstr ""
+"Zde je seznam počítačƯ, na kterĂœch jsou pƙístupnĂ© lokĂĄlně pƙipojenĂ© skenery: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Size: %s\n"
-msgstr "Velikost: %s\n"
+msgid "The DHCP end ip"
+msgstr "Konec pĂĄsma adres DHCP"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Read-only"
-msgstr "Pouze pro čtení"
+msgid "Another one"
+msgstr "DalĆĄĂ­"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Device: "
-msgstr "Zaƙízení: "
+msgid "Drakbackup"
+msgstr "DrakBackup"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Tento speciĂĄlnĂ­ Boostrap\n"
-"oddíl je pro spuơtění\n"
-"dalƥího systému.\n"
+msgid "Colombia"
+msgstr "Kolumbie"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
+"Current configuration of `%s':\n"
"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
msgstr ""
+"AktuĂĄlnĂ­ konfigurace pro '%s':\n"
"\n"
-"Tento oddĂ­l je oddĂ­l\n"
-"s ovladači, je lepơí\n"
-"no nechat neporuĆĄenĂœ.\n"
+"SĂ­Ć„: %s\n"
+"IP adresa: %s\n"
+"IP atributy: %s\n"
+"Ovladač: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback soubor: %s"
+msgid "Plug'n Play"
+msgstr "Plug'n Play"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID disky %s\n"
+msgid "Reunion"
+msgstr "Reunion"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Chunk size %s\n"
-msgstr "Velikost bloku(chunk) %s\n"
+msgid "Details"
+msgstr "Detaily"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Level %s\n"
-msgstr "Úroveƈ %s\n"
+msgid "For security reasons, it will be disconnected now."
+msgstr "Z bezpečnostních dƯvodƯ bude spojení ukončeno."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"StandardnĂ­ startovacĂ­ oddĂ­l\n"
-" (Pro MS-DOS, ne pro LILO)\n"
+msgid "Synchronization tool"
+msgstr "NĂĄstroj na synchronizaci"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Checking your system..."
+msgstr "Zkoumám váơ počítač..."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Print"
+msgstr "Tisk"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Loopback file(s):\n"
-" %s\n"
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
msgstr ""
-"Loopback soubor(y): \n"
-" %s\n"
+"VloĆŸte pĂĄsku s nĂĄzvem %s\n"
+" do påskové jednotky %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+msgid "Mongolia"
+msgstr "Mongolsko"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Mounted\n"
msgstr "PƙipojenĂœ\n"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Not formatted\n"
-msgstr "NenaformĂĄtovanĂœ\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Formatted\n"
-msgstr "NaformĂĄtovanĂœ\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Graphical Interface"
+msgstr "Grafické rozhraní"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Od cylindru %d do cylindru %d\n"
+msgid "Restore Users"
+msgstr "Obnovit uĆŸivatele"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektorĆŻ"
+msgid "Encryption key for %s"
+msgstr "Ơifrovací klíč pro %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Size: %s"
-msgstr "Velikost: %s"
+msgid ""
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
+msgstr ""
+"Portmapper spravuje RPC spojenĂ­, kterĂĄ jsou pouĆŸĂ­vĂĄna protokoly jako NFS\n"
+"a NIS. Portmap server musĂ­ bĂœt spuĆĄtěn na počítačích, kterĂ© fungujĂ­ jako\n"
+"servery pro protokoly, kterĂ© pouĆŸĂ­vajĂ­ mechanismus RPC."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Start: sector %s\n"
-msgstr "Začátek: sektor %s\n"
+msgid "Detected hardware"
+msgstr "NalezenĂœ hardware"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Name: "
-msgstr "Jméno: "
+msgid "Mauritius"
+msgstr "Mauritius"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "PĂ­smeno v DOSu: %s (jenom odhad)\n"
+msgid "Myanmar (Burmese)"
+msgstr "Myamarské (Burnské)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "partition %s is now known as %s"
-msgstr "oddĂ­l %s je nynĂ­ rozpoznĂĄn jako %s"
+msgid "Enabling swap partition %s"
+msgstr "Aktivuji odklĂĄdacĂ­ oddĂ­l %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Removing %s"
-msgstr "Odstraƈuji %s"
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgstr ""
+"Nejsou zde ĆŸĂĄdnĂ© FAT oddĂ­ly, kterĂ© by bylo pouĆŸĂ­t pro loopback (nebo nenĂ­ "
+"dostatek mĂ­sta)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Copying %s"
-msgstr "KopĂ­ruji %s"
+msgid "Armenian (old)"
+msgstr "Arménské (staré)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Moving files to the new partition"
-msgstr "Pƙesunuji soubory na novĂœ diskovĂœ oddĂ­l"
+msgid ""
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
+msgstr ""
+"TiskĂĄrna s nĂĄzvem \"%s\" jiĆŸ na straně %s existuje.\n"
+"Klepněte na \"PƙenĂ©st\" pro pƙepsĂĄnĂ­.\n"
+"TakĂ© mĆŻĆŸete napsat novĂœ nĂĄzev nebo ji pƙeskočit."
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
msgstr ""
-"Adresáƙ %s jiĆŸ obsahuje nějakĂĄ data\n"
-"(%s)"
+"Nalezněte ƙeĆĄenĂ­ vaĆĄich problĂ©mĆŻ pomocĂ­ on-line platformy společnosti "
+"MandrakeSoft pro podporu"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hide files"
-msgstr "Schovat soubory"
+msgid ", host \"%s\", port %s"
+msgstr ", počítač \"%s\", port %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Move files to the new partition"
-msgstr "Pƙesunout soubory na novĂœ diskovĂœ oddĂ­l"
+msgid "Monaco"
+msgstr "Monako"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "KdyĆŸ naformĂĄtujete oddĂ­l %s, ztratĂ­te tĂ­m vĆĄechna jeho data"
+msgid "%s formatting of %s failed"
+msgstr "%s formátování %s skončilo chybou"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Aby se změny uplatnily budete muset restartovat počítač"
+msgid "Partitioning failed: %s"
+msgstr "VytváƙenĂ­ diskovĂœch oddĂ­lĆŻ selhalo: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Bude zapsĂĄna novĂĄ tabulka oddĂ­lĆŻ na disku %s!"
+msgid "Canada (cable)"
+msgstr "Kanada (kabel)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "Balíček %s musĂ­ bĂœt nainstalovĂĄn. Chcete ho nainstalovat?"
+msgid "Upgrade"
+msgstr "Aktualizovat"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "What type of partitioning?"
-msgstr "JakĂœ typ diskovĂ©ho oddĂ­lu?"
+msgid "Workstation"
+msgstr "PracovnĂ­ stanice"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Buďte opatrní: tato akce je nebezpečná."
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"Instaluji balíček %s\n"
+"%d%%"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "chunk size"
-msgstr "Velikost bloku (chunk)"
+msgid "Kyrgyzstan"
+msgstr "KyrgyzstĂĄn"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "level"
-msgstr "Ășroveƈ"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "With basic documentation"
+msgstr "Základní dokumentace (doporučeno!)"
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#: ../../services.pm:1
#, c-format
-msgid "device"
-msgstr "zaƙízení"
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anacron - spouĆĄtĂ­ opakujĂ­cĂ­ se akce"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Various"
-msgstr "DalĆĄĂ­"
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"MusĂ­te mĂ­t koƙenovĂœ oddĂ­l.\n"
+"K jeho vytvoƙení musíte zvolit jeden existující oddíl\n"
+"(nebo vytvoƙit novĂœ), zvolit 'PƙípojnĂœ bod'\n"
+"a nastavit ho na '/'"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Mount options"
-msgstr "Volby pro pƙipojení"
+msgid "Proxy should be http://..."
+msgstr "Proxy by měla bĂœt http://..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "File already exists. Use it?"
-msgstr "Soubor uĆŸ existuje. MĂĄm ho pouĆŸĂ­t?"
+msgid "South Africa"
+msgstr "JiĆŸnĂ­ Afrika"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "Soubor uĆŸ je pouĆŸĂ­vĂĄn jinĂœm loopbackem, zvolte si jinĂœ"
+msgid "Western Sahara"
+msgstr "ZĂĄpadnĂ­ Sahara"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Give a file name"
-msgstr "Zadejte nĂĄzev souboru"
+msgid "Etherboot Floppy/ISO"
+msgstr "Disketa Etherboot/ISO"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Filesystem type: "
-msgstr "SouborovĂœ systĂ©m: "
+msgid "Modify printer configuration"
+msgstr "Změnit nastavení tiskárny"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Size in MB: "
-msgstr "Velikost v MB: "
+msgid "Choose a partition"
+msgstr "Vyberte oddĂ­l"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Loopback file name: "
-msgstr "NĂĄzev souboru loopbacku:"
+msgid "Edit current rule"
+msgstr "Upravit současnĂ© pravidlo"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Loopback"
-msgstr "Loopback"
+msgid "%s"
+msgstr "%s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "Tento oddĂ­l nemĆŻĆŸe bĂœt pouĆŸit pro loopback"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
+msgstr ""
+"Argumenty: (arg)\n"
+"\n"
+" PovolĂ­/ZakĂĄĆŸe zaznamenĂĄvĂĄnĂ­ podivnĂœch IPv4 paketĆŻ."
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "LVM name?"
-msgstr "NĂĄzev pro LVM?"
+msgid "Please test the mouse"
+msgstr "VyzkouĆĄejte prosĂ­m, zda funguje myĆĄ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "new"
-msgstr "novĂœ"
+msgid "Other Media"
+msgstr "Dalƥí média"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Zvolte existující LVM pro pƙidání"
+msgid "Backup system files"
+msgstr "Zålohovat systémové soubory"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Zvolte existující RAID pro pƙidání"
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Moving partition..."
-msgstr "Pƙesouvám oddíl..."
+msgid "Sector"
+msgstr "Sektor"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Moving"
-msgstr "Pƙesouvám"
+msgid "Qatar"
+msgstr "Katar"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "Na kterĂœ sektor chcete oddĂ­l pƙesunout?"
+msgid "LDAP Base dn"
+msgstr "ZĂĄkladnĂ­ dn pro LDAP"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Sector"
-msgstr "Sektor"
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr ""
+"NemĆŻĆŸete označit tento balíček, protoĆŸe pro jeho instalaci nenĂ­ dost mĂ­sta"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "Na kterĂœ disk chcete oddĂ­l pƙesunout?"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "generate auto-install floppy"
+msgstr "Vytvoƙit disketu pro automatickou instalaci"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Move"
-msgstr "Pƙesunout"
+msgid "Dialing mode"
+msgstr "Typ vytáčení"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "New size in MB: "
-msgstr "NovĂĄ velikost v MB: "
+msgid "File sharing"
+msgstr "SdĂ­lenĂ­ souborĆŻ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Choose the new size"
-msgstr "Zvolte novou velikost"
+msgid "Clean /tmp at each boot"
+msgstr "Vyčistit /tmp pƙi kaĆŸdĂ©m startu"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Resize"
-msgstr "Změnit velikost"
+msgid "Malawi"
+msgstr "Malawi"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "KdyĆŸ změnĂ­te velikost oddĂ­lu %s, ztratĂ­te tĂ­m vĆĄechna jeho data"
+msgid "Please choose your type of mouse."
+msgstr "Vyberte si typ vaĆĄĂ­ myĆĄi."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "VĆĄechna data z tohoto oddĂ­lu by měla bĂœt zĂĄlohovĂĄna"
+msgid "class of hardware device"
+msgstr "tƙída hardwarovĂ©ho zaƙízenĂ­"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This partition is not resizeable"
-msgstr "Na tomto diskovĂ©m oddĂ­lu nelze měnit velikost"
+msgid ""
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
+msgstr ""
+"Zde jsou počítače a sĂ­tě, na kterĂœch budou dostupnĂ© lokĂĄlnĂ­ tiskĂĄrna(y):"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "PočítĂĄm hranice souborovĂ©ho systĂ©mu fat"
+msgid "United Kingdom"
+msgstr "VelkĂĄ BritĂĄnie"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "Kam chcete pƙipojit %s?"
+msgid "running"
+msgstr "spuơtěno"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"NemĆŻĆŸu smazat pƙípojnĂœ bod, protoĆŸe tento oddĂ­l je pouĆŸĂ­vĂĄn pro loopback.\n"
-"Odstraƈte nejprve loopback"
+msgid "default"
+msgstr "pƙedvolenĂ©"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Kam chcete pƙipojit zaƙízení %s?"
+msgid "Indonesia"
+msgstr "Indonésie"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "Kam chcete pƙipojit loopback soubor %s?"
+msgid "France [SECAM]"
+msgstr "Francie [SECAM]"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "Pƙepínám z ext2 na ext3"
+msgid "restrict"
+msgstr "omezenĂ­"
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Which filesystem do you want?"
-msgstr "KterĂœ souborovĂœ systĂ©m chcete pouĆŸĂ­t?"
+msgid "must have"
+msgstr "musĂ­te mĂ­t"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Change partition type"
-msgstr "Změnit typ oddílu"
+msgid ""
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
+msgstr ""
+"CUPS nepodporuje tiskårny na serverech Novell nebo tiskårny, které posílají "
+"data na skupinu pƙíkazƯ.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "TĂ­m ĆŸe změnĂ­te typ oddĂ­lu %s pƙijdete o vĆĄechna jeho data"
+msgid "Senegal"
+msgstr "Senegal"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove the loopback file?"
-msgstr "Odstranit soubor loopbacku?"
+msgid "Command line"
+msgstr "Pƙíkazová ƙádka"
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
msgstr ""
-"NemĆŻĆŸete vytvoƙit novĂœ oddĂ­l\n"
-"(protoĆŸe jste jiĆŸ dosĂĄhli maximĂĄlnĂ­ho počtu primĂĄrnĂ­ch oddĂ­lĆŻ).\n"
-"Nejprve odstraƈte některĂœ primĂĄrnĂ­ oddĂ­l a vytvoƙte oddĂ­l rozơíƙenĂœ."
+"NĂĄĆĄ elektronickĂœ obchod nabĂ­zĂ­ ucelenou ƙadu naĆĄich LinuxovĂœch ƙeĆĄenĂ­, "
+"stejně jako speciální nabídky naơich produktƯ a dalơí \"lahƯdky\":"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Preference: "
-msgstr "NastavenĂ­: "
+msgid "access to administrative files"
+msgstr "pƙístup k administrativním souborƯm"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Start sector: "
-msgstr "Počáteční sektor: "
+msgid ""
+"Error during sendmail.\n"
+" Your report mail was not sent.\n"
+" Please configure sendmail"
+msgstr ""
+"Chyba pƙi posílání poơty\n"
+" VĂĄmi zvolenĂœ report nebyl odeslĂĄn\n"
+" Proveďte prosím nastavení sendmailu"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Create a new partition"
-msgstr "Vytvoƙit novĂœ oddĂ­l"
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ", multifunkční zaƙízení na paralelním portu \\#%s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Use for loopback"
-msgstr "PouĆŸĂ­t loopback"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
+msgstr ""
+"Argumenty: (val)\n"
+"\n"
+"NastavĂ­ čas vyprĆĄenĂ­ pro shell. NulovĂĄ hodnota znamenĂĄ ĆŸĂĄdnĂœ čas."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Modify RAID"
-msgstr "Změnit RAID"
+msgid "Montserrat"
+msgstr "Montserrat"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Remove from LVM"
-msgstr "Odebrat z LVMu"
+msgid "Automatic dependencies"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Remove from RAID"
-msgstr "Odebrat z RAIDu"
+msgid "Swap"
+msgstr "OdklĂĄdacĂ­ (swap)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Add to LVM"
-msgstr "Pƙidat do LVMu"
+msgid "Connecting to the Internet "
+msgstr "Pƙipojení k Internetu"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add to RAID"
-msgstr "Pƙidat do RAIDu"
+msgid "Restore Other"
+msgstr "Obnovit ostatnĂ­"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Format"
-msgstr "FormĂĄtovat"
+msgid "TV card"
+msgstr "TV karta"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Detailed information"
-msgstr "Podrobné informace"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "TiskĂĄrna na serveru Windows 95/98/NT"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Trying to rescue partition table"
-msgstr "PokouĆĄĂ­m se obnovit tabulku oddĂ­lĆŻ"
+msgid ", "
+msgstr ", "
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
msgstr ""
-"VloĆŸte disketu do mechaniky\n"
-"VĆĄechna data na tĂ©to disketě budou smazĂĄna"
-
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Warning"
-msgstr "VarovĂĄnĂ­"
+"Argumenty: (umask)\n"
+"\n"
+"Nastavuje umask pro uĆŸivatele root."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select file"
-msgstr "Zvolit soubor"
+msgid "Remove selected host/network"
+msgstr "Odstranit vybranĂœ počítač/sĂ­Ć„"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"ZĂĄloĆŸnĂ­ tabulka oddĂ­lĆŻ nemĂĄ stejnou velikost\n"
-"Chcete pƙesto chcete pokračovat?"
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
+msgstr "Postfix je program pro doručovĂĄnĂ­ poĆĄty z jednoho počítače na jinĂœ."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Removable media automounting"
-msgstr "AutomatickĂ© pƙipojovĂĄnĂ­ pro vyjĂ­matelnĂĄ mĂ©dia"
+msgid "Disconnection from the Internet failed."
+msgstr "OdpojenĂ­ z Internetu selhalo."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Reload partition table"
-msgstr "Znovu načíst tabulku oddílƯ"
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
+msgstr ""
+"Zde mĆŻĆŸete vybrat klĂĄvesu nebo kombinaci klĂĄves, kterou\n"
+"budete moci pƙepĂ­nat rozloĆŸenĂ­ znakĆŻ vaĆĄĂ­ klĂĄvesnice.\n"
+"(napƙ. mezi českĂœm a americkĂœm)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Rescue partition table"
-msgstr "ZĂĄchrana tabulky oddĂ­lĆŻ"
+msgid "Network Hotplugging"
+msgstr "RychlĂ© pƙipojenĂ­ do sĂ­tě"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Restore partition table"
-msgstr "Obnovit tabulku oddĂ­lĆŻ"
+msgid "if set to yes, reports check result to tty."
+msgstr "pokud je nastaveno, posĂ­lĂĄ vĂœsledek kontroly na tty."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Save partition table"
-msgstr "UloĆŸit tabulku oddĂ­lĆŻ"
+msgid "Restore From CD"
+msgstr "Obnovit z CD"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-"Abyste mohli mĂ­t vĂ­ce oddĂ­lĆŻ, musĂ­te smazat jeden existujĂ­cĂ­ a na jeho "
-"místě\n"
-"vytvoƙit rozơíƙenĂœ (extended) oddĂ­l"
+"VĂĄĆĄ počítač bude nastaven pro sdĂ­lenĂ­ svĂ©ho pƙipojenĂ­ k Internetu.\n"
+"Tato vlastnost umoĆŸĆˆuje pƙístup dalĆĄĂ­ch počítačƯ na lokĂĄlnĂ­ sĂ­ti k sĂ­ti "
+"Internet pƙes pƙipojení tohoto počítače.\n"
+"\n"
+"Pƙed pokračovĂĄnĂ­m se ujistěte, ĆŸe jste nastavili vaĆĄi sĂ­Ć„ a pƙipojenĂ­ k "
+"Internetu pomocĂ­ aplikace drakconnect.\n"
+"\n"
+"Pozn.: Pro nastavenĂ­ lokĂĄlnĂ­ sĂ­tě (LAN) potƙebujete vyhrazenĂœ sĂ­Ć„ovĂœ adaptĂ©r."
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "I can't add any more partition"
-msgstr "NemĆŻĆŸu pƙidat ĆŸĂĄdnĂœ dalĆĄĂ­ oddĂ­l"
+msgid ""
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr ""
+"Vyberte si prosĂ­m, kterĂœ sĂ­Ć„ovĂœ adaptĂ©r chcete pouĆŸĂ­t pro pƙipojenĂ­ k "
+"internetu"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "All primary partitions are used"
-msgstr "VĆĄechny primĂĄrnĂ­ oddĂ­ly (partitions) jsou pouĆŸĂ­vĂĄny"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr "Pƙístup k paměƄovĂ© kartě na multifunkčnĂ­m zaƙízenĂ­ od HP"
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Hard drive information"
-msgstr "Informace o pevném disku"
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
+"RozĆĄiƙte obzory svĂ©ho počítače s některĂœmi z ĆĄirokĂ© ƙady partnerĆŻ, kteƙí "
+"nabĂ­zejĂ­ profesionĂĄlnĂ­ sluĆŸby kompatibilnĂ­ s distribucĂ­ Mandrake Linux."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Auto allocate"
-msgstr "Automaticky rozmĂ­stit"
+msgid "Internet Connection Sharing is now disabled."
+msgstr "SdĂ­lenĂ­ InternetovĂ©ho pƙipojenĂ­ je nynĂ­ vypnuto."
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Clear all"
-msgstr "VĆĄe smazat"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr "pokud je nastaveno, ověƙuje kontrolní součet pro suid/sgid soubory."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Chcete uloĆŸit Ășpravy souboru /etc/fstab?"
+msgid "Latin American"
+msgstr "Latinsko-Americké"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Chcete skončit bez zapsání do tabulky oddílƯ?"
+msgid "Japanese text printing mode"
+msgstr "TiskovĂœ reĆŸim pro japonskĂœ text"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Quit without saving"
-msgstr "Konec bez uloĆŸenĂ­"
+msgid "Old device file"
+msgstr "StarĂœ soubor se zaƙízenĂ­m"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Continue anyway?"
-msgstr "Pƙesto chcete pokračovat?"
+msgid "Info: "
+msgstr "Informace: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Toggle to expert mode"
-msgstr "Pƙepnout se do módu 'expert'"
+msgid "Button `%s': %s"
+msgstr "Tlačítko '%s': %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Toggle to normal mode"
-msgstr "Pƙepnout se do módu 'normální'"
+msgid "Please wait"
+msgstr "Prosím počkejte"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Undo"
-msgstr "Zpět"
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Exit"
-msgstr "Konec"
+msgid "None"
+msgstr "ĆœĂĄdnĂ©"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose a partition"
-msgstr "Vyberte oddĂ­l"
+msgid "The entered IP is not correct.\n"
+msgstr "ZadanĂĄ IP adresa nenĂ­ sprĂĄvnĂĄ.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose another partition"
-msgstr "Vyberte jinĂœ oddĂ­l"
+msgid "Ethernet Card"
+msgstr "EthernetovĂĄ karta"
-#: ../../diskdrake/removable.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Change type"
-msgstr "Změnit typ"
+msgid "Info"
+msgstr "Informace"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Search servers"
-msgstr "Vyhledat servery"
+msgid "Install"
+msgstr "Instalace"
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Domain"
-msgstr "Doména"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr ""
+"Klepněte na \"Dále ->\", pokud chcete smazat vơechna data a oddíly na tomto\n"
+"pevnĂ©m disku. Buďte opatrnĂ­, po odklepnutĂ­ nelze obnovit ĆŸĂĄdnĂĄ dƙívějĆĄĂ­ "
+"data\n"
+"ani oddĂ­ly a to i pro Windows.\n"
+"\n"
+"Klepnutím na \"<- Zpět\" zruơíte tuto operaci bez ztráty dat a oddílƯ na "
+"disku."
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Username"
-msgstr "UĆŸivatelskĂ© jmĂ©no"
+msgid "Exit install"
+msgstr "Ukončení instalace"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Please enter your username, password and domain name to access this host."
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
msgstr ""
-"ProsĂ­m zadejte svĂ© uĆŸivatelskĂ© jmĂ©no, heslo a nĂĄzev domĂ©ny, pod kterĂœmi "
-"chcete pƙistupovat k tomuto počítači."
+"Vơe se podaƙilo nastavit.\n"
+"NynĂ­ lze pouĆŸĂ­t tento počítač pro sdĂ­lenĂ­ pƙipojenĂ­ k Internetu pro vaĆĄi "
+"lokĂĄlnĂ­ sĂ­Ć„, kterĂĄ pouĆŸĂ­vĂĄ automatickou konfiguraci sĂ­tě (DHCP)."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Domain Authentication Required"
-msgstr "VyĆŸadovĂĄno OvěƙenĂ­ DomĂ©ny"
+msgid "Remote CUPS server"
+msgstr "VzdĂĄlenĂœ CUPS server"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Another one"
-msgstr "DalĆĄĂ­"
+msgid "Sun - Mouse"
+msgstr "Sun - myĆĄ"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Which username"
-msgstr "KterĂ© uĆŸivatelskĂ© jmĂ©no"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
+msgstr ""
+"Na vaƥem systému je nastaveno pouze jedno síƄové rozhraní:\n"
+"\n"
+"%s\n"
+"\n"
+"Na tomto adaptéru bude nastavena lokålní síƄ."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Can't login using username %s (bad password?)"
-msgstr "Nelze se pƙihlĂĄsit pod uĆŸivatelskĂœm jmĂ©nem %s (chybnĂ© heslo?)"
+msgid "Minimal install"
+msgstr "MinimĂĄlnĂ­ instalace"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "cpu # "
-msgstr "cpu #"
+msgid "Ethiopia"
+msgstr "Etiopie"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "SMBus controllers"
-msgstr "SMBus kontrolér"
+msgid "Devanagari"
+msgstr "Devanagari"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "USB controllers"
-msgstr "USB kontrolér"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr ""
+"- zaƙízenĂ­ PCI: udĂĄvĂĄ slot PCI, zaƙízenĂ­ a funkci tĂ©to karty\n"
+"- zaƙízení EIDE: zaƙízení je buď master nebo slave\n"
+"- zaƙízení SCSI: udává ID sběrnice a zaƙízení SCSI"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "SCSI controllers"
-msgstr "SCSI kontrolér"
+msgid "Total size: %d / %d MB"
+msgstr "CelkovĂĄ velikost: %d / %d MB"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Firewire controllers"
-msgstr "Firewire kontroléry"
+msgid "disabled"
+msgstr "vypnuto"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "(E)IDE/ATA kontrolér"
+msgid "Search for new scanners"
+msgstr "VyhledĂĄnĂ­ novĂœ skenerĆŻ"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Joystick"
-msgstr "Joystick"
+msgid "Disabling servers..."
+msgstr "Zakazuji servery..."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Scanner"
-msgstr "Skener"
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr ""
+"Vyberte si interval mezi\n"
+"jednotlivĂœmi zĂĄlohami"
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Unknown/Others"
-msgstr "NeznĂĄmĂœ/JinĂœ"
+msgid "Installation of %s failed. The following error occured:"
+msgstr "Instalace %s neuspěla. Stala se tato chyba:"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Bridges and system controllers"
-msgstr "Systémové kontroléry"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr "Nelze spustit mkinitrd -f /boot/initrd-%s.img %s."
-#: ../../harddrake/data.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Modem"
-msgstr "Modem"
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
+msgstr ""
+"Vybrali jste pro instalaci nĂĄsledujĂ­cĂ­ server(y): %s\n"
+"\n"
+"\n"
+"Tyto servery budou standardně aktivovĂĄny. PƙestoĆŸe nenĂ­ znĂĄmĂœ ĆŸĂĄdnĂœ\n"
+"bezpečnostnĂ­ problĂ©m, mohou se pƙesto vyskytnout. Je proto dĆŻleĆŸitĂ© "
+"aktualizovat\n"
+"vĆŸdy, kdyĆŸ je to potƙeba.\n"
+"\n"
+"\n"
+"Chcete opravdu nainstalovat tyto servery?\n"
-#: ../../harddrake/data.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Ethernetcard"
-msgstr "EthernetovĂĄ karta"
+msgid "Network printer (TCP/Socket)"
+msgstr "SĂ­Ć„ovĂĄ tiskĂĄrna (TCP/Socket)"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Processors"
-msgstr "Procesory"
+msgid "Backup User files..."
+msgstr "ZĂĄlohovat soubory uĆŸivatelĆŻ..."
-#: ../../harddrake/data.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Webcam"
-msgstr "WebovĂĄ kamera"
+msgid "Install system"
+msgstr "Instalace systému"
-#: ../../harddrake/data.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Soundcard"
-msgstr "ZvukovĂĄ karta"
+msgid "First DNS Server (optional)"
+msgstr "PrvnĂ­ DNS Server (nepovinnĂœ)"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Other MultiMedia devices"
-msgstr "Dalơí multimediální zaƙízení"
+msgid ""
+"Alternatively, you can specify a device name/file name in the input line"
+msgstr "Jako alternativu mĆŻĆŸete zadat do políčka nĂĄzev zaƙízenĂ­/nĂĄzev souboru"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Tvcard"
-msgstr "TV karta"
+msgid "dhcpd Config..."
+msgstr "NastavenĂ­ dhcpd..."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Videocard"
-msgstr "GrafickĂĄ karta"
+msgid "The setup has already been done, but it's currently disabled."
+msgstr "NastavenĂ­ jiĆŸ bylo provedeno, ale nynĂ­ je vypnuto."
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Tape"
-msgstr "PĂĄska"
+msgid "LILO/grub Installation"
+msgstr "Instalace LILO/Grub"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
+msgid "Israeli"
+msgstr "Izraelské"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "CD/DVD burners"
-msgstr "CD/DVD vypalovačky"
+msgid "load setting"
+msgstr "nahrĂĄt volby"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "CDROM"
-msgstr "CDROM"
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "TiskĂĄrna \"%s\" na serveru \"%s\""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Disk"
-msgstr "Disk"
+msgid "Floppy can be removed now"
+msgstr "Disketu nynĂ­ mĆŻĆŸete vyjmout"
-#: ../../harddrake/data.pm:1
-#, c-format
-msgid "Zip"
-msgstr "Zip"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Truly minimal install"
+msgstr "MinimĂĄlnĂ­ instalace"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Floppy"
-msgstr "Disketa"
+msgid "Denmark"
+msgstr "DĂĄnsko"
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Let me pick any driver"
-msgstr "UmoĆŸnit vĂœběr ovladače"
+msgid "Moving partition..."
+msgstr "Pƙesouvám oddíl..."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Driver:"
-msgstr "Ovladač:"
+msgid "(This) DHCP Server IP"
+msgstr "Adresa DHCP serveru"
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
-"Pokud skutečně vĂ­te, kterĂœ ovladač je ten sprĂĄvnĂœ pro vaĆĄi kartu,\n"
-"mĆŻĆŸete ho vybrat se seznamu.\n"
-"\n"
-"Aktuální ovladač pro vaơi zvukovou kartu \"%s\" je \"%s\"."
+msgid "Test of the configuration"
+msgstr "VyzkouĆĄet nastavenĂ­"
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr "VĂœběr libovolnĂ©ho ovladače"
+msgid "Installing %s ..."
+msgstr "Instaluji %s ..."
-#: ../../harddrake/sound.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
msgstr ""
-"KlasickĂœ postup pƙi ƙeĆĄenĂ­ problĂ©mĆŻ se zvukem je pomocĂ­ těchto pƙíkazĆŻ:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" vĂĄm ƙekne, jakĂœ ovladač je vĂœchozĂ­ pro\n"
-"danou zvukovou kartu\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" vĂĄm ƙekne, kterĂœ ovladač se nynĂ­\n"
-"pouĆŸĂ­vĂĄ\n"
+"V zĂĄvislosti na tom, zda jste zvolili individuĂĄlnĂ­ vĂœběr balíčkĆŻ, se "
+"nabĂ­dne\n"
+"stromovĂĄ struktura obsahujĂ­cĂ­ vĆĄechny balíčky organizovanĂ© do skupin\n"
+"a podskupin. Pƙi prochĂĄzenĂ­ stromu mĆŻĆŸete vybrat jednotlivĂ© balíčky, "
+"podskupiny\n"
+"nebo celé skupiny.\n"
"\n"
-"- \"/sbin/lsmod\" provede kontrolu toho, zda modul (ovladač) je nahrán nebo "
-"ne\n"
+"Pokud vyberete ze stromu balíček, objevĂ­ se v pravĂ© části jeho popis.\n"
"\n"
-"- \"/sbin/chkconfig --list sound\" a \"/sbin/chkconfig --list alsa\" vĂĄm "
-"sdělí\n"
-"zda je pro initlevel nastaveny sluĆŸby alsa a sound\n"
+"!! Pokud se nachĂĄzĂ­ mezi vybranĂœmi balíčky serverovĂ© programy, aĆ„ uĆŸ "
+"vybrané\n"
+"záměrně nebo jako součást skupiny, zobrazí se dotaz na to,\n"
+"zda opravdu chcete tyto servery nainstalovat. V distribuci Mandrake Linux\n"
+"jsou tyto servery spuĆĄtěny pƙi startu systĂ©mu. I kdyĆŸ v době vydĂĄnĂ­ "
+"distribuce\n"
+"nejsou znĂĄmy ĆŸĂĄdnĂ© bezpečnostnĂ­ problĂ©my, mohou se vyskytnout později.\n"
+"Pokud nevĂ­te, k čemu jsou určeny některĂ© serverovĂ© sluĆŸby, klepněte na \"Ne"
+"\".\n"
+"KlepnutĂ­m na \"Ano\" se danĂ© sluĆŸby nainstalujĂ­ a automaticky spustĂ­ pƙi "
+"startu !!\n"
"\n"
-"- \"aumix -q\" vám ƙekne, zda je zvuk ztlumen nebo ne\n"
+"Volba \"Automatické zåvislosti\" vypne varovné hlåƥení, které se objeví\n"
+"vĆŸdy, kdyĆŸ vyberete balíček, kterĂœ mĂĄ dalĆĄĂ­ zĂĄvislosti a instalačnĂ­ program\n"
+"musĂ­ vybrat dalĆĄĂ­ potƙebnĂ© balíčky, aby instalace mohla proběhnout Ășspěơně.\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" vĂĄm ƙekne, kterĂœ program pouĆŸĂ­vĂĄ zvukovou "
-"kartu.\n"
-
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Sound trouble shooting"
-msgstr "Ƙeƥení problémƯ se zvukem"
+"MalĂĄ ikonka diskety dole umoĆŸĆˆuje nahrĂĄt jiĆŸ pƙedem vybranĂœ seznam balíčkĆŻ.\n"
+"Po klepnutĂ­ na ikonu budete dotĂĄzĂĄni na vloĆŸenĂ­ diskety, kterĂĄ byla "
+"vytvoƙena na\n"
+"konci jinĂ© instalace. Ve druhĂ©m tipu pƙi poslednĂ­m kroku najdete nĂĄvod, jak "
+"si\n"
+"tuto disketu vytvoƙit. "
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "Chyba: Ovladač \"%s\" pro vaơi zvukovou kartu není na seznamu"
+msgid "Choose your filesystem encryption key"
+msgstr "Vyberte si ĆĄifrovacĂ­ klíč pro souborovĂœ systĂ©m"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unkown driver"
-msgstr "NeznĂĄmĂœ ovladač"
+msgid ""
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
+msgstr ""
+"Vyberte prosĂ­m svĂ© zaƙízenĂ­ CD/DVD.\n"
+"(Stisknutím klávesy Enter pƙenesete nastavení do ostatních polí.\n"
+"Toto políčko nenĂ­ povinnĂ©, je to pouze nĂĄstroj pro vyplněnĂ­ formuláƙe.)"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "Pro vaĆĄi zvukovou kartu (%s) nenĂ­ ĆŸĂĄdnĂœ znĂĄmĂœ ovladač"
+msgid "Andorra"
+msgstr "Andorra"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No known driver"
-msgstr "NenĂ­ rozpoznĂĄn ĆŸĂĄdnĂœ ovladač"
+msgid "Sierra Leone"
+msgstr "Sierra Leone"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-"Pro vaĆĄi zvukovou kartu (%s) nenĂ­ ĆŸĂĄdnĂœ vhodnĂœ volně pouĆŸitelnĂœ ovladač, ale "
-"existuje alternativní proprietární ovladač na \"%s\"."
+msgid "Botswana"
+msgstr "Botswana"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "No open source driver"
-msgstr "NenĂ­ dostupnĂœ ĆŸĂĄdnĂœ open source ovladač"
+msgid "(default value: %s)"
+msgstr "(vĂœchozĂ­ hodnota: %s)"
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Čekejte prosím... Aktivuji konfiguraci"
+msgid "Alternative test page (Letter)"
+msgstr "AlternativnĂ­ testovacĂ­ strĂĄnka (Letter)"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"The old \"%s\" driver is blacklisted.\n"
+"DHCP Server Configuration.\n"
"\n"
-"It has been reported to oops the kernel on unloading.\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-"StarĆĄĂ­ ovladač \"%s\" je na černĂ© listině.\n"
+"NastavenĂ­ DHCP serveru.\n"
"\n"
-"Bylo u něj zjiĆĄtěno, ĆŸe pƙi odebrĂĄnĂ­ zpĆŻsobĂ­ pĂĄd jĂĄdra.\n"
+"Zde mĆŻĆŸete vybrat rĆŻznĂ© volby nastavenĂ­ DHCP serveru.\n"
+"Pokud nevĂ­te, co kterĂĄ volba znamenĂĄ, ponechte jejĂ­ vĂœchozĂ­ hodnotu.\n"
"\n"
-"Pƙi dalĆĄĂ­m spuĆĄtěnĂ­ bude pouĆŸit pouze novĂœ ovladač \"%s\" "
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Trouble shooting"
-msgstr "Ƙeƥení problémƯ"
+msgid "Choose an X server"
+msgstr "Zvolte X server"
-#: ../../harddrake/sound.pm:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Swap partition size in MB: "
+msgstr "Velikost odklĂĄdacĂ­ho oddĂ­lu v MB: "
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
+"Other (not drakbackup)\n"
+"keys in place already"
msgstr ""
-"OSS (Open Source Sound) bylo první API pro zvuk. Není to API nezåvislé na OS "
-"(je dostupnĂ© ve vĂ­ce unixovĂœch systĂ©mech), ale mĂĄ pouze zĂĄkladnĂ­ funkce a "
-"omezené API.\n"
-"A co vĂ­ce, vĆĄechny OSS ovladače \"vynalĂ©zajĂ­ znovu kolo\".\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) je modulĂĄrnĂ­ architektura, kterĂĄ "
-"kterĂĄ podporuje daleko vĂ­ce ISA, USB a PCI karet.\n"
-"\n"
-"TakĂ© poskytuje daleko lepĆĄĂ­ API neĆŸ OSS.\n"
-"\n"
-"Pokud chcete pouĆŸĂ­t alsa ovladače, mĆŻĆŸete pouĆŸĂ­t dva reĆŸimy:\n"
-"- starĆĄĂ­ reĆŸim kompatibility s OSS API\n"
-"- novĂ© ALSA API, kterĂ© poskytuje daleko vĂ­ce moĆŸnostĂ­, ale vyĆŸaduje pouĆŸĂ­t "
-"knihovnu ALSA.\n"
+"Jiné (ne pro drakbackup)\n"
+"klíče jsou jiĆŸ na mĂ­stě"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "No changes to backup!"
+msgstr "Nejsou ĆŸĂĄdnĂ© změny pro zĂĄlohovĂĄnĂ­!"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Formatted\n"
+msgstr "NaformĂĄtovanĂœ\n"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Type of install"
+msgstr "Typ instalace"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "TiskĂĄrna \"%s\" na SMB/Windows serveru \"%s\""
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
+"- Daemon (%s) include:\n"
msgstr ""
"\n"
-"\n"
-"VaĆĄe karta nynĂ­ pouĆŸĂ­vĂĄ ovladač %s\"%s\" (vĂœchozĂ­ ovladač pro vaĆĄi kartu je "
-"\"%s\")"
+"- DĂ©mon (%s) zahrnuje :\n"
-#: ../../harddrake/sound.pm:1
+#: ../../modules/parameters.pm:1
+#, c-format
+msgid "%d comma separated numbers"
+msgstr "%d čísel oddělenĂœch čárkou"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
msgstr ""
-"Zde si pro vaĆĄi zvukovou (%s) kartu mĆŻĆŸete vybrat alternativnĂ­ ovladač (buď "
-"OSS nebo ALSA)"
+"Protokol rusers umoĆŸĆˆuje uĆŸivatelĆŻm sĂ­tě zjistit kdo je pƙihlĂĄĆĄen na\n"
+"jinĂ©m počítači."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Sound configuration"
-msgstr "NastavenĂ­ zvuku"
+msgid "Automatic Steps Configuration"
+msgstr "NastavenĂ­ automatickĂœch krokĆŻ"
-#: ../../harddrake/sound.pm:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
msgstr ""
-"Pro vaĆĄi zvukovou kartu (%s), kterĂĄ nynĂ­ pouĆŸĂ­vĂĄ ovladač \"%s\", nenĂ­ ĆŸĂĄdnĂœ "
-"znĂĄmĂœ OSS/ALSA alternativnĂ­ ovladač."
+"Chcete vědět více o komunitě okolo Open Source? Pƙipojte se ke světu "
+"Svobodného Software!"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No alternative driver"
-msgstr "Bez alternativního ovladače"
+msgid "Barbados"
+msgstr "Barbados"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "enable radio support"
-msgstr "Zapnout podporu rĂĄdia"
+msgid "Please select data to backup..."
+msgstr "Zkontrolujte prosĂ­m data pro zĂĄlohovĂĄnĂ­..."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Radio support:"
-msgstr "Podpora rĂĄdia :"
+msgid ""
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
+msgstr ""
+"Pƙipojení selhalo.\n"
+"Ověƙte nastavení v ovládacím centru Mandrake."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "PLL setting:"
-msgstr "NastavenĂ­ PLL :"
+msgid "received"
+msgstr "pƙijato"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr "Počet bufferĆŻ pro zachycenĂ­ systĂ©mem mmap"
+msgid "/File/_New"
+msgstr "/Soubor/_NovĂœ"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Number of capture buffers:"
-msgstr "Počet bufferƯ pro zachycení :"
+msgid "The DNS Server IP"
+msgstr "IP adresa DNS serveru"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Tuner type:"
-msgstr "Typ tuneru :"
+msgid "IP Range End:"
+msgstr "IP rozsah do:"
-#: ../../harddrake/v4l.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Card model:"
-msgstr "Model karty :"
+msgid "High"
+msgstr "VyĆĄĆĄĂ­"
-#: ../../harddrake/v4l.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
-"Modul bttv jĂĄdra operačnĂ­ho systĂ©mu GNU/Linux nalezne sprĂĄvnĂ© parametry "
-"automaticky pro větơinu moderních TV karet.\n"
-"Je-li vaĆĄe karta ĆĄpatně detekovĂĄna, lze nastavit sprĂĄvnĂœ typ karty a tuneru "
-"ručně zde. Pokud je to potƙeba, vyberte takĂ© parametry vaĆĄĂ­ TV karty."
+msgid "NoVideo"
+msgstr "Bez Videa"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "this field describes the device"
+msgstr "Toto pole popisuje zaƙízení"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Unknown|Generic"
-msgstr "NeznĂĄmĂĄ|ObecnĂĄ"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Pƙidávám tiskárnu do Star Office/OpenOffice.org/GIMP"
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "NeznĂĄmĂĄ|CPH06X (bt878) [vĂ­ce dodavatelĆŻ]"
+msgid "Local Printers"
+msgstr "MĂ­stnĂ­ tiskĂĄrny"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "NeznĂĄmĂĄ|CPH05X (bt878) [vĂ­ce dodavatelĆŻ]"
+msgid "Installation image directory"
+msgstr "Adresáƙ s obrazem instalace"
-#: ../../harddrake/v4l.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Auto-detect"
-msgstr "Autodetekce"
+msgid "NIS Server"
+msgstr "NIS Server"
-#: ../../interactive/newt.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Do"
-msgstr "Provést"
+msgid "Port: %s"
+msgstr "Port: %s"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Your choice? (default %s) "
-msgstr "VaĆĄe volba? (vĂœchozĂ­ %s) "
+msgid "Spain"
+msgstr "Ơpanělsko"
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Ć patnĂĄ volba, zkuste to znovu\n"
+msgid "This user name has already been added"
+msgstr "Toto uĆŸivatelskĂ© jmĂ©no uĆŸ bylo pƙidĂĄno"
-#: ../../interactive/stdio.pm:1
+#: ../../interactive.pm:1
#, c-format
-msgid "Re-submit"
-msgstr "Znovu odeslat"
+msgid "Choose a file"
+msgstr "Vyberte soubor"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Oznamuji změnu návěơtí:\n"
-"%s"
+msgid "Apply"
+msgstr "PouĆŸĂ­t"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Vyberte si prosĂ­m prvnĂ­ číslo z vĂœběru, kterĂ© chcete editovat,\n"
-"nebo stiskněte Enter pro pokračování.\n"
-"VaĆĄe volba? "
+msgid "Auto-detect available ports"
+msgstr "Automaticky detekovat dostupné porty"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Je zde vĂ­ce voleb, ze kterĂœch je moĆŸnĂ© si vybrat (%s).\n"
+msgid "Internet Connection Sharing currently disabled"
+msgstr "SdĂ­lenĂ­ InternetovĂ©ho pƙipojenĂ­ je vypnuto"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "VaĆĄe volba? (vĂœchozĂ­ '%s'%s) "
+msgid "San Marino"
+msgstr "San Marino"
-#: ../../interactive/stdio.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid " enter `void' for void entry"
-msgstr " zadejte `void` pokud chcete prĂĄzdnĂœ vstup"
+msgid "Belgium"
+msgstr "Belgie"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to click on this button?"
-msgstr "Chcete klepnout na toto tlačítko? "
+msgid "Kuwait"
+msgstr "Kuvajt"
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Button `%s': %s"
-msgstr "Tlačítko '%s': %s"
+msgid "Choose the window manager to run:"
+msgstr "Vyberte si, kterĂœ sprĂĄvce oken mĂĄ bĂœt spouĆĄtěn:"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "sub generation of the cpu"
+msgstr "Specifická tƙída cpu"
+
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "VaĆĄe volba? (0/1, vĂœchozĂ­ '%s') "
+msgid "First Time Wizard"
+msgstr "PrĆŻvodce pro novĂ© uĆŸivatele"
-#: ../../interactive/stdio.pm:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Entries you'll have to fill:\n"
-"%s"
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
msgstr ""
-"PoloĆŸky, kterĂ© je potƙeba vyplnit:\n"
-"%s"
+"Stala se chyba, ale nevím, jak jí správně interpretovat.\n"
+"Pokračujte na vlastní riziko."
-#: ../../modules/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Spuơtění modulu %s selhalo.\n"
-"Chcete to zkusit s jinĂœmi parametry?"
+msgid "please wait, parsing file: %s"
+msgstr "čekejte prosím, zpracovávám soubor: %s"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Specify options"
-msgstr "Zadejte moĆŸnosti"
+msgid "Taiwan"
+msgstr "Taiwan"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Autoprobe"
-msgstr "Automatické prozkoumåní"
+msgid "Pakistan"
+msgstr "PĂĄkistĂĄn"
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
msgstr ""
-"V některĂœch pƙípadech potƙebuje ovladač %s pro svoji sprĂĄvnou funkci dalĆĄĂ­\n"
-"informace, pƙestoĆŸe normĂĄlně funguje i bez nich. Chtěli byste zadat\n"
-"nějakĂ© doplƈujĂ­cĂ­ moĆŸnosti, nebo raději nechĂĄte ovladač samostatně "
-"prozkoumat\n"
-"hardware vaĆĄeho počítače, aby zĂ­skal informace kterĂ© potƙebuje? ZkoumĂĄnĂ­\n"
-"hardware mĆŻĆŸe ve vĂœjimečnĂœch pƙípadech zpĆŻsobit zamrznutĂ­ počítače, ale "
-"nemělo\n"
-"by v ĆŸĂĄdnĂ©m pƙípadě zpĆŻsobit jinĂ© ĆĄkody."
+"Aby bylo moĆŸnĂ© pƙi tomto nastavenĂ­ tisknout na inkoustovĂœch tiskĂĄrnĂĄch od "
+"firmy Lexmark, je potƙeba mĂ­t tiskovĂœ ovladač poskytovanĂœ společnostĂ­ "
+"Lexmark (http://www.lexmark.com/). Klepněte na odkaz \"Drivers\", vyberte "
+"vĂĄĆĄ model tiskĂĄrny, a potĂ© zvolte Linux jako operačnĂ­ systĂ©m. Ovladače jsou "
+"v RPM balíčcích nebo skripty shellu s interaktivní grafickou instalací. Tu "
+"ale k nastavenĂ­ vaĆĄeho systĂ©mu nepotƙebujete. Ukončete instalačnĂ­ program "
+"ihned po odsouhlasenĂ­ licence. Pak mĆŻĆŸete vytisknout strĂĄnku s nastavenĂ­m "
+"tiskovĂœch hlav programem \"lexmarkmaintain\" a nastavit zarovnĂĄnĂ­ tiskovĂ© "
+"hlavy pomocĂ­ tohoto programu."
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Which %s driver should I try?"
-msgstr "KterĂœ %s ovladač mĂĄm zkusit?"
+msgid "Permissions"
+msgstr "Oprávnění"
-#: ../../modules/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Module options:"
-msgstr "Volby modulu:"
+msgid "Provider name (ex provider.net)"
+msgstr "JmĂ©no poskytovatele (napƙ. provider.net)"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"NynĂ­ mĆŻĆŸete poskytnout modulu %s dalĆĄĂ­ parametry.\n"
-"Volby se zadĂĄvajĂ­ ve tvaru ''nĂĄzev=hodnota nĂĄzev2=hodnota2 ...''.\n"
-"Napƙíklad, ''io=0x300 irq=7''"
+msgid "Version: %s\n"
+msgstr "Verze: %s\n"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
-"NynĂ­ lze zadat volby pro modul %s.\n"
-"Pozn.: kaĆŸdĂĄ adresa by měla bĂœt ve tvaru 0x napƙ. '0x123'"
+"VĂĄĆĄ systĂ©m mĂĄ mĂĄlo systĂ©movĂœch prostƙedkĆŻ. Pƙi instalaci Mandrake Linuxu se\n"
+"mĆŻĆŸete setkat s rĆŻznĂœmi problĂ©my. Pokud se tak stane, zkuste textovou\n"
+"verzi instalačnĂ­ho programu. Ta se spouĆĄtĂ­ tak, ĆŸe pƙi startu\n"
+"z CD mechaniky stisknete 'F1' a poté napíƥete 'text'."
-#: ../../modules/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
+msgid "Use the Windows partition for loopback"
+msgstr "PouĆŸĂ­t Windows oddĂ­l jako loopback"
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instaluji ovladač pro %s kartu %s"
+msgid "Armenian (typewriter)"
+msgstr "Arménské (psací stroj)"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "See hardware info"
-msgstr "UkĂĄzat informace o hardware"
+msgid "Connection type: "
+msgstr "Typ pƙipojení:"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "MĂĄte nějakĂ© %s rozhranĂ­?"
+msgid "Graphical interface"
+msgstr "Grafické rozhraní"
-#: ../../modules/interactive.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Do you have another one?"
-msgstr "MĂĄte jeĆĄtě nějakĂ© jinĂ©?"
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s s hardwarovou 3D akceleracĂ­"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Found %s %s interfaces"
-msgstr "NaĆĄel jsem %s %s rozhranĂ­"
+msgid "India"
+msgstr "Indie"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "Zde mĆŻĆŸete nastavit kaĆŸdĂœ z parametrĆŻ modulu."
+msgid "Chad"
+msgstr "Čad"
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "comma separated strings"
-msgstr "čárkou oddělenĂ© znakovĂ© ƙetězce"
+msgid "Slovakia"
+msgstr "Slovensko"
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "comma separated numbers"
-msgstr "čárkou oddělená čísla"
+msgid "Singapore"
+msgstr "Singapur"
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "%d comma separated strings"
-msgstr "%d znakovĂœch ƙetězcĆŻ oddělenĂœch čárkou"
+msgid "Cambodia"
+msgstr "KambodĆŸa"
-#: ../../modules/parameters.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d čísel oddělenĂœch čárkou"
+msgid "Monitor HorizSync: %s\n"
+msgstr "HorizontĂĄlnĂ­ frekvence monitoru: %s\n"
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "a number"
-msgstr "číslo"
+msgid "Path"
+msgstr "Cesta"
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
msgstr ""
-"Potƙebujete mikrokód pro Alcatel.\n"
-"Stáhněte jej z\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"a zkopĂ­rujte soubor mgmt.o do /usr/share/speedtouch"
+"Zde mĆŻĆŸete zadat libovolnĂœ pƙíkaz, do kterĂ©ho bude posĂ­lĂĄm vĂœstup z tiskovĂ© "
+"Ășlohy mĂ­sto pƙímĂ©ho odeslĂĄnĂ­ na tiskĂĄrnu."
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
msgstr ""
-"NejbÄ›ĆŸněji se pro pƙipojenĂ­ pomocĂ­ ADSL pouĆŸĂ­vĂĄ pppoe.\n"
-"NěkterĂĄ pƙipojenĂ­ pouĆŸĂ­vajĂ­ pptp, některĂĄ pouze dhcp. Jestli si nejste "
-"jistĂ­, zvolte 'pouĆŸĂ­t pppoe'"
+"TiskovĂœ systĂ©m (%s) nebude automaticky spuĆĄtěn pƙi startu počítače.\n"
+"\n"
+"Je moĆŸnĂ©, ĆŸe volba automatickĂ©ho startu byla vypnuta ve vyĆĄĆĄĂ­ bezpečnostnĂ­ "
+"Ășrovni, protoĆŸe tiskovĂœ systĂ©m je potenciĂĄlnĂ­ nebezpečí pro sĂ­Ć„ovĂœ Ăștok.\n"
+"\n"
+"Chcete nastavit zpět automatickĂœ start tiskovĂ©ho systĂ©mu?"
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Connect to the Internet"
-msgstr "Pƙipojení k Internetu"
+msgid ""
+"Printer %s\n"
+"What do you want to modify on this printer?"
+msgstr ""
+"TiskĂĄrna %s\n"
+"Co chcete změnit na tĂ©to tiskĂĄrně?"
-#: ../../network/adsl.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Sagem (using pppoa) usb"
-msgstr "Sagem (pomocĂ­ pppoa) usb"
+msgid "Add host"
+msgstr "Pƙidat počítač"
-#: ../../network/adsl.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch USB"
+msgid ""
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
+"\n"
+"The current driver for your \"%s\" sound card is \"%s\" "
+msgstr ""
+"Pokud skutečně vĂ­te, kterĂœ ovladač je ten sprĂĄvnĂœ pro vaĆĄi kartu,\n"
+"mĆŻĆŸete ho vybrat se seznamu.\n"
+"\n"
+"Aktuální ovladač pro vaơi zvukovou kartu \"%s\" je \"%s\"."
-#: ../../network/adsl.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "use dhcp"
-msgstr "pouĆŸĂ­t dhcp"
+msgid ""
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
+"\n"
+"\"Custom\" permit a per-user granularity.\n"
+msgstr ""
+"Chcete povolit uĆŸivatelĆŻm, aby si mohli sdĂ­let adresáƙe ve svĂ©m domovskĂ©m "
+"adresáƙi?\n"
+"Pokud to povolĂ­te, uĆŸivatelĆŻm stačí pouze klepnout na \"SdĂ­let\" v "
+"aplikacĂ­ch Konqueror a Nautilus.\n"
+"\n"
+"Lze takĂ© provĂ©st \"VlastnĂ­\" povolenĂ­ pro jednotlivĂ© uĆŸivatele.\n"
-#: ../../network/adsl.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "use pptp"
-msgstr "pouĆŸĂ­t pptp"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
+msgstr ""
+"Vyberte si, zda chcete uloĆŸit nebo nahrĂĄt vĂœběr balíčkĆŻ na disketu.\n"
+"FormĂĄt vĂœběru je stejnĂœ jako formĂĄt automaticky generovanĂ© diskety."
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "use pppoe"
-msgstr "pouĆŸĂ­t pppoe"
+msgid "China (broadcast)"
+msgstr "Čína (broadcast)"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Other ports"
-msgstr "DalĆĄĂ­ porty"
+msgid "Use quota for backup files."
+msgstr "PouĆŸĂ­t kvĂłty pro zĂĄloĆŸnĂ­ soubory."
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Everything (no firewall)"
-msgstr "VĆĄechno (bez firewallu)"
+msgid "Configuring printer \"%s\"..."
+msgstr "Nastavuji tiskĂĄrnu \"%s\"..."
-#: ../../network/drakfirewall.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
-msgstr ""
-"ZadĂĄn ĆĄpatnĂœ port: %s.\n"
-"SprĂĄvnĂœ formĂĄt je \"port/tcp\" nebo \"port/udp\", \n"
-"kde číslo portu je mezi 1 a 65535."
+msgid "Internet connection"
+msgstr "InternetovĂ© pƙipojenĂ­"
-#: ../../network/drakfirewall.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
msgstr ""
-"Zadali jste nesprĂĄvnĂœ port.\n"
-"Správně je napƙíklad: 139/tcp 139/udp.\n"
-"VĂ­ce se dozvĂ­te ze souboru /etc/services."
+"Spuơtění modulu %s selhalo.\n"
+"Chcete to zkusit s jinĂœmi parametry?"
-#: ../../network/drakfirewall.pm:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr "KterĂ© sluĆŸby pƙístupnĂ© z Internetu chcete povolit?"
+msgid "Welcome to the Open Source world."
+msgstr "Vítejte do světa Open Source"
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-"NastavenĂ­ aplikace drakfirewall\n"
-"\n"
-"PƙedtĂ­m, neĆŸ budete pokračovat, se ujistěte, ĆŸe jste nastavili vaĆĄi\n"
-"sĂ­Ć„ a pƙístup k Internetu pomocĂ­ aplikace drakconnect."
+msgid "Bosnia and Herzegovina"
+msgstr "Bosna a Hercegovina"
-#: ../../network/drakfirewall.pm:1
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
msgstr ""
-"NastavenĂ­ aplikace drakfirewall\n"
-"\n"
-"Zde je moĆŸnĂ© nastavit osobnĂ­ firewall pro tento systĂ©m Mandrake Linux.\n"
-"Pro vĂœkonnĂ© ƙeĆĄenĂ­ vyhrazenĂ©ho firewallu pouĆŸijte specializovanou\n"
-"distribuci MandrakeSecurity Firewall."
+"Pro tento pƙípojnĂœ bod potƙebujete opravdovĂœ souborovĂœ systĂ©m (ext2/ext3, "
+"ReiserFS, XFS nebo JFS)\n"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "No network card"
-msgstr "ĆœĂĄdnĂĄ sĂ­Ć„ovĂĄ karta"
+msgid "You must enter a host name or an IP address.\n"
+msgstr "Musíte zadat název počítače nebo IP adresu.\n"
-#: ../../network/drakfirewall.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "POP and IMAP Server"
-msgstr "POP a IMAP server"
+msgid "Netherlands"
+msgstr "NizozemĂ­"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "PosĂ­lĂĄm soubory..."
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Mail Server"
-msgstr "PoĆĄtovnĂ­ server"
+msgid "Internal ISDN card"
+msgstr "InternĂ­ ISDN karta"
-#: ../../network/drakfirewall.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Domain Name Server"
-msgstr "DomĂ©novĂœ server"
+msgid ""
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
+msgstr ""
+"Pro vaĆĄi zvukovou kartu (%s), kterĂĄ nynĂ­ pouĆŸĂ­vĂĄ ovladač \"%s\", nenĂ­ ĆŸĂĄdnĂœ "
+"znĂĄmĂœ OSS/ALSA alternativnĂ­ ovladač."
-#: ../../network/drakfirewall.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Web Server"
-msgstr "WebovĂœ server"
+msgid "Title"
+msgstr "NĂĄzev"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr "NĂĄzev počítače pro Zeroconf nemĆŻĆŸe obsahovat \"tečku\""
+msgid "Install & convert Fonts"
+msgstr "Instalovat & konvertovat fonty"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Host name"
-msgstr "Název počítače"
+msgid "WARNING"
+msgstr "VAROVÁNÍ"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Zeroconf Host name"
-msgstr "Název počítače pro Zeroconf"
+msgid "Installing bootloader"
+msgstr "Instaluji zaváděcí program"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
-msgstr ""
-"\n"
-"\n"
-"Pokud nechcete pouĆŸĂ­t vĂœchozĂ­ zvolenĂœ nĂĄzev,\n"
-"zadejte název počítače pro Zeroconf bez teček."
+msgid "replay"
+msgstr "zopakovat"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Configuring network"
-msgstr "Nastavuji sĂ­Ć„"
+msgid "detected %s"
+msgstr "detekovĂĄno %s"
-#: ../../network/ethernet.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
-msgstr ""
-"Vyberte si prosĂ­m, kterĂœ sĂ­Ć„ovĂœ adaptĂ©r chcete pouĆŸĂ­t pro pƙipojenĂ­ k "
-"internetu"
+msgid "Virgin Islands (U.S.)"
+msgstr "Panenské ostrovy (U.S.)"
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Choose the network interface"
-msgstr "Zvolte síƄové rozhraní"
+msgid "Bad backup file"
+msgstr "Ć patnĂœ zĂĄloĆŸnĂ­ soubor"
-#: ../../network/ethernet.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"Ve vaĆĄem počítači nebyl nalezen ĆŸĂĄdnĂœ sĂ­Ć„ovĂœ adaptĂ©r.\n"
-"Nemohu nastavit typ spojenĂ­."
+"InternetovĂ© sdĂ­lenĂ­ uĆŸ bylo nastaveno.\n"
+"NynĂ­ je vypnuto.\n"
+"\n"
+"Co chcete dále dělat?"
-#: ../../network/ethernet.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
+msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""
-"KterĂ©ho dhcp klienta chcete pouĆŸĂ­t?\n"
-"StandardnĂ­ je dhcp-client"
+"Zadejte IP adresu a port počítače, ze kterĂ©ho budete chtĂ­t vyuĆŸĂ­vat tiskĂĄrny."
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"NenaĆĄel jsem ĆŸĂĄdnou ISDN PCI kartu. ProsĂ­m zvolte si jednu z nĂĄsledujĂ­cĂ­ "
-"nabĂ­dky"
+msgid "Pipe into command"
+msgstr "Poslat do pƙíkazu"
-#: ../../network/isdn.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
msgstr ""
-"NaĆĄel jsem ISDN PCI kartu, jejĂ­ĆŸ typ ale neznĂĄm. ProsĂ­m zvolte si jednu z "
-"nĂĄsledujĂ­cĂ­ho seznamu PCI karet."
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Kterou z těchto ISDN karet máte?"
+"Některá část vaơeho hardware potƙebuje 'speciální' ovladače, aby mohla "
+"pracovat.\n"
+"DalĆĄĂ­ informace mĆŻĆŸete nalĂ©zt na: %s"
-#: ../../network/isdn.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "ISDN Configuration"
-msgstr "NastavenĂ­ ISDN"
+msgid "Detecting devices..."
+msgstr "Detekuji zaƙízení..."
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Abort"
-msgstr "Pƙeruơit"
+msgid "Click here to launch the wizard ->"
+msgstr "Klepněte pro spuơtění prƯvodce ->"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Continue"
-msgstr "Pokračovat"
+msgid "Haiti"
+msgstr "Haiti"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
+"Description of the fields:\n"
"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
msgstr ""
+"Popis polĂ­:\n"
"\n"
-"Jestli mĂĄte ISA kartu, měly by bĂœt hodnoty na nĂĄsledujĂ­cĂ­ obrazovce "
-"språvné.\n"
-"\n"
-"Jestli mĂĄte PCMCIA kartu, musĂ­te znĂĄt jejĂ­ IRQ a IO.\n"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "I don't know"
-msgstr "NevĂ­m"
-
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "PCI"
-msgstr "PCI"
+msgid "the name of the CPU"
+msgstr "nĂĄzev CPU"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "Refreshing printer data..."
+msgstr "Občerstvuji tisková data ...."
-#: ../../network/isdn.pm:1
+#: ../../install2.pm:1
#, c-format
-msgid "What kind of card do you have?"
-msgstr "JakĂœ typ karty mĂĄte?"
+msgid "You must also format %s"
+msgstr "Musíte také naformåtovat %s"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr "Chcete pouĆŸĂ­t nalezenĂ© rozhranĂ­ \"%s\" ?"
+msgid "Be careful: this operation is dangerous."
+msgstr "Buďte opatrní: tato akce je nebezpečná."
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "KterĂœ protokol chcete pouĆŸĂ­t?"
+msgid "Insert a floppy containing package selection"
+msgstr "VloĆŸte disketu obsahujĂ­cĂ­ vĂœběr balíčkĆŻ"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Protokol pouĆŸitĂœ ve zbytku světa"
+msgid "Server: "
+msgstr "Server: "
-#: ../../network/isdn.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-"Protokol pouĆŸitĂœ ve zbytku světa \n"
-" ĆŸĂĄdnĂœ D-kanĂĄl (leased lines)"
+msgid "Security Alerts:"
+msgstr "Bezpečnostní varování:"
-#: ../../network/isdn.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "European protocol"
-msgstr "EvropskĂœ protokol"
+msgid "Sweden"
+msgstr "Ơvédsko"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "EvropskĂœ protokol (EDSS1)"
+msgid "Use Expect for SSH"
+msgstr "PouĆŸĂ­t Expect pro SSH"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
-msgstr ""
-"Vyberte si svého poskytovatele internetu.\n"
-" Pokud nenĂ­ na seznamu, vyberte si JinĂœ"
+msgid "Poland"
+msgstr "Polsko"
-#: ../../network/isdn.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "External ISDN modem"
-msgstr "ExternĂ­ ISDN modem"
+msgid "Importance: %s\n"
+msgstr "DĆŻleĆŸitost: %s\n"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Internal ISDN card"
-msgstr "InternĂ­ ISDN karta"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr ""
+"Pokud chcete po zálohování pásku automaticky vysunout, prosím zatrhněte."
-#: ../../network/isdn.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "JakĂ© je vaĆĄe ISDN pƙipojenĂ­?"
+msgid "Other ports"
+msgstr "DalĆĄĂ­ porty"
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Network Configuration Wizard"
-msgstr "PrƯvodce nastavením sítě"
+msgid "number of capture buffers for mmap'ed capture"
+msgstr "Počet bufferĆŻ pro zachycenĂ­ systĂ©mem mmap"
-#: ../../network/isdn.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "StarĂĄ konfigurace (isdn4net)"
+msgid "SMBus controllers"
+msgstr "SMBus kontrolér"
-#: ../../network/isdn.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "New configuration (isdn-light)"
-msgstr "NovĂĄ konfigurace (isdn-light)"
+msgid "Connection timeout (in sec)"
+msgstr "Prodleva pƙipojení (vteƙiny)"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
msgstr ""
-"Kterou ISDN konfiguraci preferujete?\n"
-"\n"
-"* Starou, pouĆŸitou pro isd4net. Ta obsahuje vĂœkonnĂ© nĂĄstroje,\n"
-" ale je choulostivĂĄ na konfiguraci a nenĂ­ standardnĂ­.\n"
-"\n"
-"* Novou konfiguraci, snazơí pro porozumění, více standardní,\n"
-" ale s mĂ©ně nĂĄstroji.\n"
-"\n"
-"Doporučujeme vybrat si snazơí novou konfiguraci.\n"
+"NěkterĂ© prvnĂ­ modely čipsetĆŻ i486DX100 neprovĂĄděly sprĂĄvně po instrukci "
+"\"halt\" nĂĄvrat do operačnĂ­ho reĆŸimu"
-#: ../../network/modem.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do nothing"
-msgstr "Nedělat nic"
+msgid "Croatian"
+msgstr "Chorvatské"
-#: ../../network/modem.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Use existing partition"
+msgstr "PouĆŸĂ­t existujĂ­cĂ­ oddĂ­l"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Install rpm"
-msgstr "Instalovat rpm"
+msgid "Unable to contact mirror %s"
+msgstr "Nelze kontaktovat zrcadlo %s"
-#: ../../network/modem.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
-msgstr ""
-"byl detekovĂĄn win modem zaloĆŸenĂœ na \"%s\", chcete nainstalovat potƙebnĂœ "
-"software ?"
+msgid "/Help/_About..."
+msgstr "/Nápověda/_O aplikaci..."
-#: ../../network/modem.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Title"
-msgstr "NĂĄzev"
+msgid "Remove user directories before restore."
+msgstr "Odebrat adresáƙe uĆŸivatele pƙed obnovou."
-#: ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
msgstr ""
-"Våƥ modem není systémem podporovån.\n"
-"PodĂ­vejte se na strĂĄnky http://www.linmodems.org"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "DruhĂœ DNS Server (nepovinnĂœ)"
+"NynĂ­ začne konfigurace vzdĂĄlenĂ© tiskĂĄrny. To vyĆŸaduje funkčnĂ­ sĂ­Ć„ovĂ© "
+"spojenĂ­, ale sĂ­Ć„ nenĂ­ zatĂ­m nastavena. Pokud budete pokračovat bez nastavenĂ­ "
+"sĂ­tě, nebude moĆŸnĂ© pouĆŸĂ­t tiskĂĄrnu, kterou poĆŸadujete. Jak chcete pokračovat?"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "First DNS Server (optional)"
-msgstr "PrvnĂ­ DNS Server (nepovinnĂœ)"
+msgid "CUPS printer configuration"
+msgstr "Nastavení tiskáren pƙes CUPS"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Domain name"
-msgstr "Jméno domény"
+msgid "could not find any font in your mounted partitions"
+msgstr "nelze nalĂ©zt ĆŸĂĄdnĂ© fonty v pƙipojenĂ©m oddĂ­le"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "CHAP"
-msgstr "CHAP"
+msgid "F00f bug"
+msgstr "F00f chyba"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Script-based"
-msgstr "Podle scĂ©náƙe"
+msgid "XFree %s"
+msgstr "XFree %s"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Terminal-based"
-msgstr "PomocĂ­ terminĂĄlu"
+msgid ""
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
+msgstr ""
+"KterĂ©ho dhcp klienta chcete pouĆŸĂ­t?\n"
+"StandardnĂ­ je dhcp-client"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid "Domain Name:"
+msgstr "Nåzev domény:"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "Login ID"
-msgstr "PƙihlaĆĄovacĂ­ jmĂ©no"
+msgid "On Floppy"
+msgstr "Na disketu"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Phone number"
-msgstr "Telefonní číslo"
+msgid "Restore"
+msgstr "Obnovit"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Connection name"
-msgstr "Název pƙipojení"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
+msgstr ""
+"pokud je nastaveno, kontroluje, zda je sĂ­Ć„ovĂ© rozhranĂ­ v promiskuitnĂ­m reĆŸimu"
-#: ../../network/modem.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Dialup options"
-msgstr "MoĆŸnosti vytáčenĂ­"
+msgid "Looking for available packages..."
+msgstr "HledĂĄm dostupnĂ© balíčky"
-#: ../../network/modem.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Ke kterĂ©mu sĂ©riovĂ©mu portu je vĂĄĆĄ modem pƙipojen?"
+msgid "Init Message"
+msgstr "Úvodní zpráva"
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Network Configuration"
-msgstr "Nastavení sítě"
+msgid "Rescue partition table"
+msgstr "ZĂĄchrana tabulky oddĂ­lĆŻ"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
-msgstr ""
-"Vyskytl se problĂ©m během konfigurace.\n"
-"Otestujte pƙipojení k Internetu pomocí net_monitor nebo mcc. Pokud není "
-"spojení funkční, bude potƙeba asi znovu načíst konfiguraci"
+msgid "Connection complete."
+msgstr "Pƙipojení ukončeno."
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Doporučujeme po tomto kroku restartovat X Window,\n"
-"aby se pƙedeĆĄlo problĂ©mĆŻm se změnou nĂĄzvu počítače."
+msgid "Cyprus"
+msgstr "Kypr"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Gratulujeme, konfigurace sítě a internetu je ukončena.\n"
-"\n"
-"Konfigurace bude nynĂ­ aktivovĂĄna.\n"
+msgid "Remove from RAID"
+msgstr "Odebrat z RAIDu"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
+msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr ""
-"Vyskytl se problĂ©m pƙi restartu sĂ­tě: \n"
-"\n"
-"%s"
+"Tento ĆĄifrovacĂ­ klíč je pƙíliĆĄ jednoduchĂœ (musĂ­ bĂœt alespoƈ %d znakĆŻ dlouhĂœ)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr "Je potƙeba restartovat sĂ­Ć„. Chcete provĂ©st restart ?"
+msgid "Configuration Wizards"
+msgstr "PrĆŻvodci nastavenĂ­m"
#: ../../network/netconnect.pm:1
#, c-format
-msgid "Network configuration"
-msgstr "Nastavení sítě"
+msgid "ISDN connection"
+msgstr "ISDN pƙipojení"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Chcete se automaticky pƙipojovat po startu počítače?"
+msgid "primary"
+msgstr "primĂĄrnĂ­"
-#: ../../network/netconnect.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Internet connection"
-msgstr "InternetovĂ© pƙipojenĂ­"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr " na serveru SMB/Windows \"%s\", sdĂ­lenĂĄ jako \"%s\""
-#: ../../network/netconnect.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
+"\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
msgstr ""
-"Máte nastaveno více zpƯsobƯ, jak se pƙipojit k Internetu.\n"
-"Vyberte si jeden, kterĂœ chcete pouĆŸĂ­t.\n"
+"NynĂ­ si zvolte, kterĂ© sluĆŸby majĂ­ bĂœt spuĆĄtěny pƙi startu počítače.\n"
+"\n"
+"Je zde seznam vĆĄech sluĆŸeb, kterĂ© jsou aktuĂĄlně nainstalovĂĄny.\n"
+"ProhlĂ©dněte si seznam pozorně a zruĆĄte ty, kterĂ© nepotƙebujete spouĆĄtět pƙi\n"
+"startu počítače.\n"
"\n"
+"Pokud pƙejedete myĆĄĂ­ nad některou poloĆŸkou, objevĂ­ se malĂĄ nĂĄpověda\n"
+"s popisem, co danĂĄ sluĆŸba dělĂĄ. Pokud pƙesně nevĂ­te, zda je sluĆŸba uĆŸitečnĂĄ\n"
+"nebo ne, je lepĆĄĂ­ ji nechat ve vĂœchozĂ­m stavu.\n"
+"\n"
+"!! RozvaĆŸte, co za sluĆŸby spustit, zvlĂĄĆĄtě pokud budete počítač provozovat\n"
+"jako server: nepotƙebujete vĆĄechny sluĆŸby. Pamatujte, ĆŸe čím vĂ­ce sluĆŸeb\n"
+"je spuĆĄtěno, tĂ­m je větĆĄĂ­ nebezpečí neĆŸĂĄdoucĂ­ho proniknutĂ­ do počítače.\n"
+"TakĆŸe povolte opravdu jen ty sluĆŸby, kterĂ© nezbytně potƙebujete.\n"
+"!!"
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Zvolte si pƙipojenĂ­, kterĂ© chcete nastavit"
+msgid "Skip"
+msgstr "Pƙeskočit"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "ethernet card(s) detected"
-msgstr "detekovanĂĄ(Ă©) sĂ­Ć„ovĂĄ(Ă©) karta(y)"
+msgid "Niue"
+msgstr "Niue"
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "LAN connection"
-msgstr "Pƙipojení k LAN"
+msgid ""
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
+msgstr ""
+"Aktivuje či deaktivuje vĆĄechny sĂ­Ć„ovĂĄ rozhranĂ­, kterĂĄ majĂ­ nastartovat pƙi\n"
+"startu systému."
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "cable connection detected"
-msgstr "detekovĂĄno kabelovĂ© pƙipojenĂ­"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid ""
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
+msgstr ""
+"Frekvence CPU v MHz (Megahertz je hodnota pƙibliĆŸně rovna vypočtenĂ©mu počtu "
+"instrukcí, které je schopen procesor provést za sekundu)"
-#: ../../network/netconnect.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Cable connection"
-msgstr "KabelovĂ© pƙipojenĂ­"
+msgid "important"
+msgstr "dĆŻleĆŸitĂ©"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "detected"
-msgstr "detekovĂĄno"
+msgid "Total Progress"
+msgstr "CelkovĂœ prĆŻběh"
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "ADSL connection"
-msgstr "ADSL pƙipojení"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
+"\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
+"\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
+"\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
+msgstr ""
+"Aplikace DrakX se nejdƙíve pokusĂ­ najĂ­t vĆĄechny pevnĂ© disky v počítači.\n"
+"TakĂ© se pokusĂ­ nalĂ©zt jeden nebo vĂ­ce PCI SCSI adaptĂ©rĆŻ. Pokud nějakĂœ "
+"najde,\n"
+"automaticky nainstaluje sprĂĄvnĂœ ovladač.\n"
+"\n"
+"ProtoĆŸe automatickĂĄ detekce hardware nemusĂ­ vĆŸdy nalĂ©zt vĆĄechny typy "
+"hardware,\n"
+"budete v dialogu dotĂĄzĂĄni, zda vĆŻbec mĂĄte nějakĂœ SCSI adaptĂ©r. \n"
+"Pokud si budete muset vybrat ovladač ručně, aplikace DrakX se zeptá,\n"
+"zda pro něj chcete zadat nějakĂ© volby Měli byste povolit aplikaci DrakX,\n"
+"aĆ„ se pokusĂ­ zjistit, kterĂ© volby jsou pro danou kartu potƙeba. VětĆĄinou to\n"
+"funguje dobƙe.\n"
+"\n"
+"Pokud to nebude fungovat, budete muset zadat dalơí informace pro ovladač "
+"ručně."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "detected %s"
-msgstr "detekovĂĄno %s"
+msgid "Users"
+msgstr "UĆŸivatelĂ©"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "ISDN connection"
-msgstr "ISDN pƙipojení"
+msgid "Aruba"
+msgstr "Aruba"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Winmodem connection"
-msgstr "Pƙipojení pƙes winmodem"
+msgid "Preparing bootloader..."
+msgstr "Pƙipravuji zaváděcí program"
-#: ../../network/netconnect.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "detected on port %s"
-msgstr "detekovĂĄno na portu %s"
+msgid "Gateway (e.g. %s)"
+msgstr "Brána (napƙ. %s)"
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Normal modem connection"
-msgstr "ModemovĂ© pƙipojenĂ­"
+msgid "The passwords do not match"
+msgstr "Hesla nejsou shodnĂĄ"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detecting devices..."
-msgstr "Detekuji zaƙízení..."
+msgid "Examples for correct IPs:\n"
+msgstr "Pƙíklady sprĂĄvnĂœch IP adres:\n"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Expert Mode"
-msgstr "ExpertnĂ­ reĆŸim"
+msgid "Frequency (MHz)"
+msgstr "Frekvence (MHz)"
-#: ../../network/netconnect.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Use auto detection"
-msgstr "PouĆŸĂ­t autodetekci"
+msgid ""
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
+msgstr ""
+"Pokud chcete pouĆŸĂ­t uloĆŸenĂœ vĂœběr balíčkĆŻ, spusĆ„te instalaci takto: 'linux "
+"defcfg=floppy'"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Choose the profile to configure"
-msgstr "Zvolte profil pro nastavenĂ­"
+msgid "the number of the processor"
+msgstr "číslo procesoru"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Vítá vás prƯvodce pƙipojením k síti\n"
-"\n"
-"Nyní lze nastavit pƙipojení k síti nebo internetu.\n"
-"Pokud nechcete pouĆŸĂ­t automatickou detekci, odznačte políčko.\n"
+msgid "Hardware clock set to GMT"
+msgstr "Hardwarové hodiny nastaveny na GMT"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"ProtoĆŸe provĂĄdĂ­te instalaci po sĂ­ti, je jiĆŸ sĂ­Ć„ nastavena.\n"
-"Klepněte na Ok pro zachovĂĄnĂ­ nastavenĂ­ nebo klepněte na ZruĆĄit pro novĂ© "
-"nastavení pƙipojení Internetu a k síti.\n"
+msgid "Give a file name"
+msgstr "Zadejte nĂĄzev souboru"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Nyní se bude konfigurovat pƙipojení %s.\n"
-"\n"
-"\n"
-"Stiskněte OK pro pokračování."
+msgid "Please choose the port that your printer is connected to."
+msgstr "Vyberte port, ke kterĂ©mu je vaĆĄe tiskĂĄrna pƙipojena."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Nyní se pƙipravuje konfigurace %s pƙipojení."
+msgid "Change Cd-Rom"
+msgstr "Vyměnit CD-ROM"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet connection & configuration"
-msgstr "Nastavení a pƙipojení k internetu"
+msgid "Paraguay"
+msgstr "Paraguay"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
+msgstr "PouĆŸĂ­t pƙírĆŻstkovou zĂĄlohu (nepƙepisovat starĆĄĂ­ zĂĄlohy)"
+
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Configure the connection"
-msgstr "Nastavit pƙipojení"
+msgid "There's no known driver for your sound card (%s)"
+msgstr "Pro vaĆĄi zvukovou kartu (%s) nenĂ­ ĆŸĂĄdnĂœ znĂĄmĂœ ovladač"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Disconnect"
-msgstr "Odpojit"
+msgid "force"
+msgstr "vnutit"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Connect"
-msgstr "Pƙipojit"
+msgid "Exit"
+msgstr "Konec"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\n"
-"You can reconfigure your connection."
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
msgstr ""
-"\n"
-"MĆŻĆŸete pƙekonfigurovat pƙipojenĂ­."
+"POZNÁMKA: V zĂĄvislosti na modelu tiskĂĄrny a tiskovĂ©m systĂ©mu je potƙeba "
+"nainstalovat dalĆĄĂ­ch %d MB potƙebnĂ©ho software."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
msgstr ""
-"\n"
-"NemĆŻĆŸete se pƙipojit k Internetu nebo pƙekonfigurovat pƙipojenĂ­."
+"NemĂĄte nakonfigurovĂĄno ĆŸĂĄdnĂ© rozhranĂ­.\n"
+"Nastavte jej klepnutĂ­m na 'Konfigurovat'"
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "V současnosti nejste pƙipojeni k Internetu."
+msgid "Estonian"
+msgstr "Estonské"
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"MĆŻĆŸete se odpojit nebo pƙekonfigurovat pƙipojenĂ­."
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
+msgstr "Apache je WWW server. Je pouĆŸĂ­vĂĄn k poskytovĂĄnĂ­ HTML a CGI souborĆŻ."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "You are currently connected to the Internet."
-msgstr "V současnosti jste pƙipojeni k Internetu"
+msgid "Add/Del Clients"
+msgstr "Pƙidat/Odebrat klienty"
-#: ../../network/network.pm:1
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "URL by mělo začínat znaky 'ftp:' nebo 'http:'"
+msgid "Choose the network interface"
+msgstr "Zvolte síƄové rozhraní"
-#: ../../network/network.pm:1
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Proxy should be http://..."
-msgstr "Proxy by měla bĂœt http://..."
+msgid "Unknown Model"
+msgstr "NeznĂĄmĂœ model"
-#: ../../network/network.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "FTP proxy"
-msgstr "FTP proxy"
+msgid "CD/DVD burners"
+msgstr "CD/DVD vypalovačky"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
+msgid ""
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"StandardnĂ­ startovacĂ­ oddĂ­l\n"
+" (Pro MS-DOS, ne pro LILO)\n"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Proxies configuration"
-msgstr "NastavenĂ­ proxy"
+msgid "choose image"
+msgstr "vyberte obraz"
-#: ../../network/network.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "Adresa brĂĄny by měla bĂœt ve tvaru 1.2.3.4"
+msgid "Firewalling configuration detected!"
+msgstr "NaĆĄel jsem existujĂ­cĂ­ nastavenĂ­ firewallu!"
-#: ../../network/network.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "Adresa serveru DNS by měla bĂœt ve tvaru 1.2.3.4"
+msgid "Connection name"
+msgstr "Název pƙipojení"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Gateway device"
-msgstr "Zaƙízení brány (gateway)"
+msgid ""
+"x coordinate of text box\n"
+"in number of characters"
+msgstr ""
+"hodnota pro x souƙadnici\n"
+"pro textovĂœ box v počtu znakĆŻ"
-#: ../../network/network.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Brána (napƙ. %s)"
+msgid "Updating package selection"
+msgstr "Aktualizuji vĂœběr balíčkĆŻ"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DNS server"
-msgstr "DNS server"
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "Kam chcete pƙipojit loopback soubor %s?"
-#: ../../network/network.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
msgstr ""
-"Prosím zadejte název vaơeho počítače.\n"
-"Tento nĂĄzev musĂ­ bĂœt ĂșplnĂœ, jako 'mybox.mylab.myco.com'.\n"
-"Pokud pouĆŸĂ­vĂĄte brĂĄnu(gateway), mĆŻĆŸete takĂ© zadat jejĂ­ adresu"
+"Disketa byla s Ășspěchem vytvoƙena.\n"
+"Nyní lze provést znovu instalaci."
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
-"Intenzita mĂĄ povolenĂ© pƙípony k, M nebo G (napƙ. \"11M\" nebo 11M) nebo "
-"pƙidejte dostatečnĂœ počet '0' (nul)."
+msgid "the number of buttons the mouse has"
+msgstr "počet tlačítek na myơi"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
msgstr ""
-"Frekvence mĂĄ povolenĂ© pƙípony k, M nebo G (napƙíklad \"2,46G\" pro frekvenci "
-"2,46 GHz) nebo pƙidejte dostatek '0' (nul)."
-
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresa musĂ­ bĂœt ve formĂĄtu 1.2.3.4"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Start at boot"
-msgstr "Spustit pƙi startu"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Pƙiƙadit nĂĄzev počítače ze zĂ­skanĂ© DHCP adresy"
+"ProsĂ­m, zadejte adresáƙ (nebo modul), do kterĂ©ho\n"
+" bude umístěna záloha na tomto počítači."
-#: ../../network/network.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Network Hotplugging"
-msgstr "RychlĂ© pƙipojenĂ­ do sĂ­tě"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "Sledovat id sĂ­Ć„ovĂ© karty (uĆŸitečnĂ© u notebookĆŻ)"
+msgid "Replay"
+msgstr "Zopakovat"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "DHCP host name"
-msgstr "Název počítače z DHCP"
+msgid "Backup other files"
+msgstr "ZĂĄlohovat dalĆĄĂ­ soubory"
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Netmask"
-msgstr "Maska sítě"
+msgid "No floppy drive available"
+msgstr "NenĂ­ dostupnĂĄ ĆŸĂĄdnĂĄ disketovĂĄ mechanika"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "IP address"
-msgstr "IP adresa"
+msgid "Backup files are corrupted"
+msgstr "ZĂĄloĆŸnĂ­ soubory jsou poĆĄkozenĂ©"
-#: ../../network/network.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp/zeroconf)"
+msgid "TV norm:"
+msgstr "Norma TV:"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Automatic IP"
-msgstr "AutomatickĂĄ IP"
+msgid "Cpuid family"
+msgstr "Rodina CPU"
-#: ../../network/network.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid " (driver %s)"
-msgstr " (ovladač %s)"
+msgid "32 MB"
+msgstr "32 MB"
-#: ../../network/network.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configuring network device %s"
-msgstr "Nastavuji sĂ­Ć„ovĂ© zaƙízenĂ­ %s"
+msgid "Lithuanian AZERTY (new)"
+msgstr "Litevské AZERTY (novå)"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Prosím zadejte IP nastavení pro tento počítač.\n"
-"KaĆŸdĂĄ poloĆŸka musĂ­ bĂœt zadĂĄna jako IP adresa v 'desetinnĂ©' formě\n"
-"(napƙíklad 1.2.3.4)."
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgstr "ano znamenĂĄ, ĆŸe aritmetickĂœ koprocesor je vybaven vektorem vĂœjimek"
-#: ../../network/network.pm:1
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
msgstr ""
-"VAROVÁNÍ: Toto zaƙízenĂ­ jiĆŸ bylo nastaveno pro pƙipojenĂ­ k Internetu.\n"
-"Klepněte na Ok pro zachování nastavení.\n"
-"Modifikace nĂĄsledujĂ­cĂ­ch poloĆŸek pƙepĂ­ĆĄe toto nastavenĂ­."
+"Zvolili jste softwarovĂœ RAID oddĂ­l jako koƙenovĂœ oddĂ­l (/).\n"
+"S tĂ­m se nenĂ­ schopnĂœ vypoƙádat ĆŸĂĄdnĂœ zavĂĄděcĂ­ program bez pouĆŸitĂ­ oddĂ­lu\n"
+"/boot. Ujistěte se prosĂ­m, ĆŸe jste tento oddĂ­l pƙidali"
-#: ../../network/shorewall.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
-msgstr ""
-"VarovĂĄnĂ­! Bylo nalezeno existujĂ­cĂ­ nastavenĂ­ firewallu. Po instalaci mĆŻĆŸe "
-"bĂœt zapotƙebĂ­ nějakĂĄ ručnĂ­ Ășprava."
+msgid "Previous"
+msgstr "Pƙedchozí"
-#: ../../network/shorewall.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "NaĆĄel jsem existujĂ­cĂ­ nastavenĂ­ firewallu!"
+msgid "Other OS (MacOS...)"
+msgstr "JinĂœ systĂ©m (MacOs...)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Account Password"
-msgstr "Heslo vaĆĄeho Ășčtu"
+msgid "To activate the mouse,"
+msgstr "VyzkouĆĄejte na myĆĄi,"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Account Login (user name)"
-msgstr "VĂĄĆĄ Ășčet (uĆŸivatelskĂ© jmĂ©no)"
+msgid "Bringing up the network"
+msgstr "Startuji sĂ­Ć„"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../common.pm:1
#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Prodleva pƙipojení (vteƙiny)"
+msgid "Screenshots will be available after install in %s"
+msgstr "SejmutĂ© obrazovky budou dostupnĂ© po instalaci v adresáƙi %s"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Connection speed"
-msgstr "Rychlost pƙipojení"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
+msgstr ""
+"InstalačnĂ­ program nalezl na disku vĂ­ce neĆŸ jeden oddĂ­l s Microsoft "
+"Windows.\n"
+"ProsĂ­m vyberte si jeden z nich, kterĂœ je potƙeba zmenĆĄit pro novu instalaci\n"
+"systému Mandrake Linux.\n"
+"\n"
+"KaĆŸdĂœ oddĂ­l je zobrazen nĂĄsledovně: \"JmĂ©no pro Linux\",\n"
+"\"Jméno pro Windows\", \"Velikost\".\n"
+"\n"
+"\"JmĂ©no pro Linux\" je sloĆŸeno nĂĄsledovně: \"typ pevnĂ©ho disku\",\n"
+"\"číslo disku\", \"číslo oddílu\". (napƙíklad \"hda1\").\n"
+"\n"
+"Pokud måte IDE disky, pak je \"typ pevného disku\" \"hd\", pokud måte SCSI,\n"
+"označení bude \"sd\".\n"
+"\n"
+"\"Číslo disku\" je vĆŸdy pĂ­smeno za \"hd\" nebo \"sd\". Pro IDE disky je "
+"takto:\n"
+"\n"
+" * \"a\" znamená \"master disk na primárním IDE ƙadiči\",\n"
+"\n"
+" * \"b\" znamená \"slave disk na primárním IDE ƙadiči\",\n"
+"\n"
+" * \"c\" znamená \"master disk na sekundárním IDE ƙadiči\",\n"
+"\n"
+" * \"d\" znamená \"slave disk na sekundárním IDE ƙadiči\".\n"
+"\n"
+"Pro SCSI disky platĂ­, ĆŸe \"a\" je \"nejmenĆĄĂ­ SCSI ID\", \"b\" je \"druhĂ©\n"
+"nejmenĆĄĂ­ SCSI ID\" atd.\n"
+"\n"
+"\"JmĂ©no pro Windows\" je pĂ­smeno, kterĂ© je pouĆŸito ve Windows\n"
+"(prvnĂ­ oddĂ­l nebo disk mĂĄ pĂ­smeno \"C:\")."
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Dialing mode"
-msgstr "Typ vytáčení"
+msgid "Tanzania"
+msgstr "Tanzanie"
-#: ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Choose your country"
-msgstr "VĂœběr si zemi"
+msgid "Computing FAT filesystem bounds"
+msgstr "PočítĂĄm hranice souborovĂ©ho systĂ©mu fat"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "DNS poskytovatele č.2 (volitelnĂ©)"
+msgid ""
+"\n"
+"Backup Sources: \n"
+msgstr ""
+"\n"
+"Zdroje pro zĂĄlohu:\n"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "DNS poskytovatele č.1 (volitelnĂ©)"
+msgid "Content of the file"
+msgstr "Obsah souboru"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Provider phone number"
-msgstr "Telefonní číslo poskytovatele"
+msgid "Authentication LDAP"
+msgstr "Ověƙení pomocí LDAP"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "JmĂ©no poskytovatele (napƙ. provider.net)"
+msgid "Let me pick any driver"
+msgstr "UmoĆŸnit vĂœběr ovladače"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Your personal phone number"
-msgstr "Vaơe osobní telefonní číslo"
+msgid "Profile "
+msgstr "Profil "
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Card IO_1"
-msgstr "IO_1 karty"
+msgid "transmitted"
+msgstr "pƙeneseno"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Card IO_0"
-msgstr "IO_0 karty"
+msgid "Palestine"
+msgstr "Palestina"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Card IO"
-msgstr "IO karty"
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Card mem (DMA)"
-msgstr "DMA karty"
+msgid "%d comma separated strings"
+msgstr "%d znakovĂœch ƙetězcĆŻ oddělenĂœch čárkou"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Card IRQ"
-msgstr "IRQ karty"
+msgid "Here is the full list of keyboards available"
+msgstr "Zde je kompletnĂ­ seznam dostupnĂœch klĂĄvesnic"
-#: ../../network/tools.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Please fill or check the field below"
-msgstr "ProsĂ­m vyplƈte nebo zkontrolujte nĂĄsledujĂ­cĂ­ Ășdaje"
+msgid "Theme name"
+msgstr "Nåzev tématu"
-#: ../../network/tools.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Connection Configuration"
-msgstr "Nastavení pƙipojení"
+msgid "/_Help"
+msgstr "/_Nápověda"
-#: ../../network/tools.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
msgstr ""
-"Nepodaƙilo se pƙipojit k Internetu.\n"
-"Pokuste se pƙekonfigurovat danĂ© pƙipojenĂ­."
+"Zde mĆŻĆŸete nastavit, zda skenery, co jsou pƙipojeny k tomuto počítači, mohou "
+"bĂœt vzdĂĄleně pƙístupnĂ© a takĂ© pƙesně z jakĂœch počítačƯ."
-#: ../../network/tools.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Z bezpečnostních dƯvodƯ bude spojení ukončeno."
+msgid "the width of the progress bar"
+msgstr "ơíƙka liơty s prƯběhem"
-#: ../../network/tools.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Počítač je nyní pƙipojen k internetu"
+msgid "Cook Islands"
+msgstr "Cookovy ostrovy"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../fs.pm:1
#, c-format
-msgid "Testing your connection..."
-msgstr "Testuji pƙipojení k internetu..."
+msgid "Formatting partition %s"
+msgstr "FormĂĄtuji oddĂ­l %s"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Chcete se nyní pokusit pƙipojit k internetu?"
+msgid "Hostname required"
+msgstr "VyĆŸadovĂĄn nĂĄzev počítače"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Internet configuration"
-msgstr "NastavenĂ­ Internetu"
+msgid "Unselect fonts installed"
+msgstr "Odznačit instalovanĂ© fonty"
-#: ../../partition_table/raw.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
-msgstr ""
-"Něco ĆĄpatnĂ©ho se stalo s pevnĂœm diskem. \n"
-"Test na integritu dat selhal. \n"
-"To znamenĂĄ, ĆŸe zĂĄpis na tento disk mĆŻĆŸe skončit nepƙedvĂ­daně a poĆĄkodit data."
+msgid "Cancel"
+msgstr "ZruĆĄit"
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid " (Default)"
-msgstr " (VĂœchozĂ­)"
+msgid "Searching for configured scanners ..."
+msgstr "Vyhledåvåm nastavené skenery ...."
-#: ../../printer/cups.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Na serveru CUPS \"%s\""
+msgid "Wheel"
+msgstr "S kolečkem"
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Remote Printers"
-msgstr "Vzdålené tiskårny"
+msgid "Videocard"
+msgstr "GrafickĂĄ karta"
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "CUPS"
-msgstr "CUPS"
+msgid "\tBackups use tar and bzip2\n"
+msgstr "\tZĂĄlohovĂĄnĂ­ pouĆŸĂ­vĂĄ tar a bzip2\n"
-#: ../../printer/cups.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "(on this machine)"
-msgstr "(na tomto počítači)"
+msgid "Remove Selected"
+msgstr "Odstranit vybrané"
-#: ../../printer/cups.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "(on %s)"
-msgstr "(na %s)"
+msgid "/Autodetect _modems"
+msgstr "/Automaticky detekovat _modemy"
-#: ../../printer/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - TiskovĂœ SystĂ©m pro Unix"
+msgid "Remove printer"
+msgstr "Odebrat tiskĂĄrnu"
-#: ../../printer/data.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "LPRng"
-msgstr "LprNG"
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
+msgstr ""
+"VAROVÁNÍ!\n"
+"\n"
+"DrakX nyní musí zmenơit oddíl s Windows. Buďte opatrní: tato operace je\n"
+"nebezpečnĂĄ. Pokud jste tak jiĆŸ neučinili, měli byste nejprve ukončit "
+"instalaci,\n"
+"spustit scandisk ve Windows (popƙípadě i defrag) a potom instalaci znovu "
+"spustit\n"
+"TakĂ© byste si měli data zĂĄlohovat. AĆŸ si budete jistĂ­, ĆŸe chcete pokračovat\n"
+"stiskněte Ok."
-#: ../../printer/data.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LprNG - LPR Nové generace"
+msgid "Which services would you like to allow the Internet to connect to?"
+msgstr "KterĂ© sluĆŸby pƙístupnĂ© z Internetu chcete povolit?"
-#: ../../printer/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "LPD"
-msgstr "LPD"
+msgid ""
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
+msgstr ""
+"Vítejte v nastavení elektronické poƥty.\n"
+"\n"
+"Zde lze nastavit systĂ©m posĂ­lĂĄnĂ­ varovnĂœch zprĂĄv.\n"
-#: ../../printer/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - DĂ©mon pro tiskĂĄrny"
+msgid "Other"
+msgstr "DalĆĄĂ­"
-#: ../../printer/data.pm:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
-msgid "PDQ"
-msgstr "PDQ"
+msgid "Default"
+msgstr "VĂœchozĂ­"
-#: ../../printer/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Tisk bez uklĂĄdĂĄnĂ­ do fronty"
+msgid "Button 2 Emulation"
+msgstr "Emulace 2 tlačítka"
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Unknown Model"
-msgstr "NeznĂĄmĂœ model"
+msgid "type1inst building"
+msgstr "vytváƙím type1inst"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Unknown model"
-msgstr "NeznĂĄmĂœ model"
+msgid "Abiword"
+msgstr "Abiword"
-#: ../../printer/main.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "%s (Port %s)"
-msgstr "%s (Port %s)"
+msgid "choose image file"
+msgstr "vyberte soubor s obrazem"
-#: ../../printer/main.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Host %s"
-msgstr "Počítač %s"
+msgid "X server"
+msgstr "X server"
-#: ../../printer/main.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Network %s"
-msgstr "SĂ­Ć„ %s"
+msgid "Domain Admin User Name"
+msgstr "UĆŸivatelskĂ© jmĂ©no SprĂĄvce domĂ©ny"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Interface \"%s\""
-msgstr "RozhranĂ­ \"%s\""
+msgid "There was an error while scanning for TV channels"
+msgstr "Nastala chyba pƙi zkoumání TV kanálƯ"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Local network(s)"
-msgstr "LokĂĄlnĂ­ sĂ­Ć„(ě)"
+msgid "US keyboard (international)"
+msgstr "US (mezinĂĄrodnĂ­)"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Raw printer (No driver)"
-msgstr "PƙímĂœ tisk (bez ovladače)"
+msgid "Not installed"
+msgstr "NenĂ­ instalovĂĄno"
-#: ../../printer/main.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ", using command %s"
-msgstr ", pouĆŸĂ­vĂĄ pƙíkaz %s"
+msgid "LAN connection"
+msgstr "Pƙipojení k LAN"
-#: ../../printer/main.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr " na serveru Novell \"%s\", tiskĂĄrna \"%s\""
+msgid "/File/-"
+msgstr "/Soubor/-"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr " na serveru SMB/Windows \"%s\", sdĂ­lenĂĄ jako \"%s\""
+msgid "Italian"
+msgstr "Italské"
-#: ../../printer/main.pm:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP hostitel \"%s\", port %s"
+msgid "Basic"
+msgstr "ZĂĄkladnĂ­"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr " na serveru LPD \"%s\", tiskĂĄrna \"%s\""
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
+msgstr ""
+"\n"
+" Copyright ©2002 by MandrakeSoft \n"
+"\tStew Benedict <sbenedict\\@mandrakesoft.com>\n"
+"\n"
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ", printing to %s"
-msgstr ", pƙi tisku na %s"
+msgid "Honduras"
+msgstr "Honduras"
-#: ../../printer/main.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ", multi-function device"
-msgstr ", multifunkční zaƙízení"
+msgid "pdq"
+msgstr ""
-#: ../../printer/main.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", multifunkční zaƙízení na HP JetDirect"
+msgid "Card IO"
+msgstr "IO karty"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ", multi-function device on USB"
-msgstr ", multifunkční zaƙízení na USB"
+msgid "when checked, owner and group won't be changed"
+msgstr "pokud zaơkrtnuto, vlastník a skupina nebudou změněny"
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", multi-function device on parallel port \\#%s"
-msgstr ", multifunkční zaƙízení na paralelním portu \\#%s"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
+msgstr ""
+"\n"
+"Tento speciĂĄlnĂ­ Boostrap\n"
+"oddíl je pro spuơtění\n"
+"dalƥího systému.\n"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ", USB printer"
-msgstr ", USB tiskĂĄrna"
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
+msgstr ""
+"Vyberte prosĂ­m, kterĂœ z krokĆŻ instalace mĂĄ bĂœt proveden automaticky stejně "
+"jako instalační program nebo bude ručně zadán"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ", USB printer \\#%s"
-msgstr ", USB tiskĂĄrna \\#%s"
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
+msgstr ""
+"Zde mĆŻĆŸete rozhodnout o tom, zda vzdĂĄleně pƙístupnĂ© skenery budou vyuĆŸitelnĂ© "
+"i na tomto počítači."
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid " on parallel port \\#%s"
-msgstr " na paralelnĂ­m portu \\#%s"
+msgid "\t-Network by FTP.\n"
+msgstr "\t-Sítí pƙes FTP.\n"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Local Printers"
-msgstr "MĂ­stnĂ­ tiskĂĄrny"
+msgid "Russian (Yawerty)"
+msgstr "Ruské (Yawerty)"
-#: ../../printer/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pipe job into a command"
-msgstr "Poslat tiskovou Ășlohu do pƙíkazu"
+msgid "You must enter a device or file name!"
+msgstr "Musíte zadat zaƙízení nebo název souboru!"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Enter a printer device URI"
-msgstr "Zadejte URI tiskovĂ©ho zaƙízenĂ­"
+msgid "/_Quit"
+msgstr "/_Konec"
-#: ../../printer/main.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Printer on NetWare server"
-msgstr "TiskĂĄrna na Netware serveru"
+msgid ""
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
+msgstr ""
+"Potƙebujete mikrokód pro Alcatel.\n"
+"Stáhněte jej z\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"a zkopĂ­rujte soubor mgmt.o do /usr/share/speedtouch"
-#: ../../printer/main.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "TiskĂĄrna na serveru Windows 95/98/NT"
+msgid "Graphics memory: %s kB\n"
+msgstr "PaměƄ na gr. kartě: %s kB\n"
-#: ../../printer/main.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "SĂ­Ć„ovĂĄ tiskĂĄrna (TCP/Socket)"
+msgid ""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+msgstr ""
+"Tento program je svobodnĂœ software; mĆŻĆŸete ho ơíƙit a/nebo modifikovat\n"
+"podle specifikace GNU General Public Licence, kterĂĄ byla publikovĂĄna\n"
+"Free Software Foundation; buď verze 2, nebo (podle volby) pozdějơí verze.\n"
+"\n"
+"Tento program je distribuovĂĄn s nadějĂ­, ĆŸe bude uĆŸitečnĂœ,\n"
+"ale BEZ JAKÝCHKOLIV ZÁRUK; BEZ NÁROKU NA PROFIT. Více detailƯ naleznete\n"
+"v licenci GNU General Public Licence.\n"
+"\n"
+"Kopii GNU General Public Licence mĆŻĆŸete obdrĆŸet buď s tĂ­mto programem\n"
+"nebo si o nĂ­ mĆŻĆŸete napsat na adresu Free Software Foundation, Inc.,\n"
+"59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Printer on remote lpd server"
-msgstr "TiskĂĄrna na vzdĂĄlenĂœ lpd serveru"
+msgid "access to compilation tools"
+msgstr "pƙístup k nástrojƯm pro kompilaci"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Tiskårna na vzdåleném CUPS serveru"
+msgid "Please select data to restore..."
+msgstr "ProsĂ­m zvolte data pro obnovu..."
-#: ../../printer/main.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Remote printer"
-msgstr "VzdĂĄlenĂĄ tiskĂĄrna"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
+msgstr ""
+"JestliĆŸe chcete pouĆŸĂ­vat aboot, musĂ­te nechat volnĂ© mĂ­sto na začátku disku\n"
+"(2048 sektorƯ stačí)"
-#: ../../printer/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Local printer"
-msgstr "MĂ­stnĂ­ tiskĂĄrna"
+msgid "Standard test page"
+msgstr "StandardnĂ­ testovacĂ­ strĂĄnka"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configuring applications..."
-msgstr "NastavovĂĄnĂ­ aplikacĂ­..."
+msgid "Create"
+msgstr "Vytvoƙit"
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printerdrake"
-msgstr "PrinterDrake"
+msgid "What"
+msgstr "Co"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "OdebĂ­rĂĄm tiskĂĄrnu \"%s\"..."
+msgid "There was an error ordering packages:"
+msgstr "Stala se chyba pƙi ƙazení balíčkƯ:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Chcete opravdu odebrat tiskĂĄrnu \"%s\"?"
+msgid "Bulgarian (BDS)"
+msgstr "Bulharské (BDS)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Remove printer"
-msgstr "Odebrat tiskĂĄrnu"
+msgid "Disable Server"
+msgstr "Vypnout server"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Learn how to use this printer"
-msgstr "NĂĄpověda pro tisk na tĂ©to tiskĂĄrně"
+msgid "Filesystem encryption key"
+msgstr "Klíč pro ĆĄifrovanĂœ souborovĂœ systĂ©m"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Print test pages"
-msgstr "Tisk testovacĂ­ch strĂĄnek"
+msgid "Gujarati"
+msgstr "Gujartské"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
msgstr ""
-"Odebrání tiskárny \"%s\" ze Star Office/OpenOffice.org/GIMP se nezdaƙilo."
+"Vyberte si prosĂ­m prvnĂ­ číslo z vĂœběru, kterĂ© chcete editovat,\n"
+"nebo stiskněte Enter pro pokračování.\n"
+"VaĆĄe volba? "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
-msgstr ""
-"TiskĂĄrna \"%s\" byla Ășspěơně odebrĂĄna z aplikace Star Office/OpenOffice.org/"
-"GIMP."
+msgid "Save theme"
+msgstr "uloĆŸit tĂ©ma"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr "OdebĂ­rĂĄm tiskĂĄrnu ze Star Office/OpenOffice.org/GIMP"
+msgid "group"
+msgstr "skupina"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Odebrat tiskĂĄrnu ze Star Office/OpenOffice.org/GIMP"
+msgid "Brazil"
+msgstr "BrazĂ­lie"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-"Pƙidání tiskárny \"%s\" do Star Office/OpenOffice.org/GIMP se nezdaƙilo."
+msgid "Auto Install"
+msgstr "AutomatickĂĄ instalace"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-"TiskĂĄrna \"%s\" byla Ășspěơně pƙidĂĄna do Star Office/OpenOffice.org/GIMP."
+msgid "Network Configuration Wizard"
+msgstr "PrƯvodce nastavením sítě"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Pƙidávám tiskárnu do Star Office/OpenOffice.org/GIMP"
+msgid "Removable media automounting"
+msgstr "AutomatickĂ© pƙipojovĂĄnĂ­ pro vyjĂ­matelnĂĄ mĂ©dia"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Pƙidat tuto tiskárnu do Star Office/OpenOffice.org/GIMP"
+msgid "Printing"
+msgstr "Tisk"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "TiskĂĄrna \"%s\" je nynĂ­ nastavena jako vĂœchozĂ­."
+msgid "Unkown driver"
+msgstr "NeznĂĄmĂœ ovladač"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Default printer"
-msgstr "VĂœchozĂ­ tiskĂĄrna"
+msgid ""
+"There are no printers found which are directly connected to your machine"
+msgstr "Na vaĆĄem počítači nebyla nalezena ĆŸĂĄdnĂĄ pƙímo pƙipojenĂĄ tiskĂĄrna"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Set this printer as the default"
-msgstr "Nastavit tuto tiskĂĄrnu jako vĂœchozĂ­"
+msgid "Create a new partition"
+msgstr "Vytvoƙit novĂœ oddĂ­l"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Printer options"
-msgstr "MoĆŸnosti tiskĂĄrny"
+msgid "Driver:"
+msgstr "Ovladač:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Printer manufacturer, model"
-msgstr "VĂœrobce tiskĂĄrny, model"
+msgid "unknown"
+msgstr "neznĂĄmĂœ"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "VĂœrobce tiskĂĄrny, model, ovladač"
+msgid "Use fdisk"
+msgstr "PouĆŸĂ­t fdisk"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "OdebĂ­rĂĄm starou tiskĂĄrnu \"%s\"..."
+msgid "MOVE YOUR WHEEL!"
+msgstr "TOČIT KOLEČKEM!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Printer name, description, location"
-msgstr "Název tiskárny, popis, umístění"
+msgid "sent: "
+msgstr "odeslĂĄno: "
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Printer connection type"
-msgstr "Typ pƙipojení pro tiskárnu"
+msgid "Automatic IP"
+msgstr "AutomatickĂĄ IP"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+" Note that two different options are available after clicking the button:\n"
+"\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
+msgstr ""
+"NynĂ­ je instalace ukončena a operačnĂ­ systĂ©m GNU/Linux je pƙipraven k "
+"pouĆŸitĂ­.\n"
+"Klepněte na \"DĂĄle ->\" a systĂ©m bude restartovĂĄn. Potom mĆŻĆŸete spustit GNU/"
+"Linux nebo\n"
+"Windows, zĂĄleĆŸĂ­ kterĂœ preferujete\n"
+"\n"
+"Tlačítko \"RozơíƙenĂ©\" zobrazĂ­ dalĆĄĂ­ dvě tlačítka:\n"
+"\n"
+" * Generovat disketu pro automatickou instalaci: vytvoƙí disketu, se kterou\n"
+"lze celou instalaci opakovat bez zĂĄsahu operĂĄtora se stejnĂœmi volbami,\n"
+"kterĂ© byly zvoleny pƙi instalaci.\n"
+"\n"
+" Po klepnutí na toto tlačítko se zobrazí dalơí dvě volby:\n"
+"\n"
+" * : \"Zopakovat\": je to částečně automatická instalace, kdy se "
+"potvrzuje\n"
+"krok pƙi rozdělování diskƯ (a pouze tento krok).\n"
+"\n"
+" * : \"Automaticky\": plně automatickĂĄ instalace, data na pevnĂ©m disku\n"
+"budou zruơena a disk pƙepsán.\n"
+"\n"
+" Tato volba je velmi uĆŸitečnĂĄ, kdyĆŸ potƙebujete nainstalovat větĆĄĂ­ počet\n"
+"stejnĂœch počítačƯ. VĂ­ce o tĂ©to moĆŸnosti je na naĆĄich WWW strĂĄnkĂĄch.\n"
+"\n"
+" * \"UloĆŸit vĂœběr balíčkĆŻ\"(*): uloĆŸĂ­ vĂœběr balíčkĆŻ, kterĂœ byl zvolen pƙi\n"
+"instalaci. Pokud budete instalovat dalĆĄĂ­ počítač, vloĆŸte disketu do "
+"mechaniky\n"
+"a spusĆ„te instalaci, stiskněte [F1] a napiĆĄte na pƙíkazovĂœ ƙádek \n"
+">> linux defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) Potƙebujete disketu formátovanou FAT (Pod Linuxem ji vytvoƙíte pƙíkazem\n"
+"\"mformat a:\")"
+
+#: ../../mouse.pm:1
#, c-format
-msgid "Raw printer"
-msgstr "PƙímĂœ tisk na tiskĂĄrnu"
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do it!"
-msgstr "Provést!"
+msgid "Configuration of a remote printer"
+msgstr "Nastavení vzdålené tiskårny"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Close"
-msgstr "Zavƙít"
+msgid "Moldova"
+msgstr "Moldava"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
+msgid "Please check if you want to erase your tape before the backup."
msgstr ""
-"TiskĂĄrna %s\n"
-"Co chcete změnit na tĂ©to tiskĂĄrně?"
+"Pokud chcete pƙed zálohováním vaơi pásku nejdƙíve smazat, prosím zatrhněte"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Modify printer configuration"
-msgstr "Změnit nastavení tiskárny"
+msgid "An online platform to respond to enterprise support needs."
+msgstr ""
+"Online platforma odpovĂ­dajĂ­cĂ­ specifickĂœm potƙebĂĄm podpory společnostĂ­."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Add a new printer"
-msgstr "Pƙidat novou tiskárnu"
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "URL by mělo začínat znaky 'ftp:' nebo 'http:'"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Normal Mode"
-msgstr "NormĂĄlnĂ­ reĆŸim"
+msgid "Add a new rule at the end"
+msgstr "Pƙidat novĂ© pravidlo na konec"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Change the printing system"
-msgstr "Změna tiskovĂ©ho systĂ©mu"
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
+msgstr ""
+"MĆŻĆŸete se rozhodnout, zda vĆĄechny tiskĂĄrny na vzdĂĄlenĂœch počítačích budou "
+"dostupnĂ© i na tomto počítači"
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "CUPS configuration"
-msgstr "NastavenĂ­ CUPS"
+msgid ""
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
+msgstr ""
+"NynĂ­ mĆŻĆŸete poskytnout modulu %s dalĆĄĂ­ parametry.\n"
+"Volby se zadĂĄvajĂ­ ve tvaru ''nĂĄzev=hodnota nĂĄzev2=hodnota2 ...''.\n"
+"Napƙíklad, ''io=0x300 irq=7''"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr "Obnovit seznam tiskĂĄren (pro zĂ­skĂĄnĂ­ vĆĄech vzdĂĄlenĂœch CUPS tiskĂĄren)"
+msgid "Quit without writing the partition table?"
+msgstr "Chcete skončit bez zapsání do tabulky oddílƯ?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr "Zobrazit seznam vĆĄech vzdĂĄlenĂœch CUPS tiskĂĄren"
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Jsou nastaveny nĂĄsledujĂ­cĂ­ tiskĂĄrny. DvojitĂœm klepnutĂ­m na kaĆŸdou z nich je "
-"moĆŸnĂ© je modifikovat, nastavit jako vĂœchozĂ­ nebo o nich zĂ­skat informace."
+msgid "Installing packages..."
+msgstr "Instaluji balíčky..."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Printing system: "
-msgstr "TiskovĂœ systĂ©m: "
+msgid "Dutch"
+msgstr "Holandské"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Checking installed software..."
-msgstr "OvěƙujĂ­ nainstalovanĂœ software..."
+msgid "The following packages need to be installed:\n"
+msgstr "Je potƙeba nainstalovat tyto balíčky:\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installing Foomatic..."
-msgstr "Instaluji Foomatic ..."
+msgid "Angola"
+msgstr "Angola"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "NastavenĂ­ tiskĂĄrny \"%s\" selhalo!"
+msgid "service setting"
+msgstr "nastavenĂ­ sluĆŸeb"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Nastavuji tiskĂĄrnu \"%s\"..."
+msgid "Custom"
+msgstr "VlastnĂ­"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Reading printer data..."
-msgstr "Načítám data k tisku ..."
+msgid "File is already used by another loopback, choose another one"
+msgstr "Soubor uĆŸ je pouĆŸĂ­vĂĄn jinĂœm loopbackem, zvolte si jinĂœ"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "KterĂœ tiskovĂœ systĂ©m chcete pouĆŸĂ­t pro tisk?"
+msgid "Read-only"
+msgstr "Pouze pro čtení"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select Printer Spooler"
-msgstr "Zvolte tiskovĂœ systĂ©m pro tiskĂĄrnu"
+msgid "Latvia"
+msgstr "LotyĆĄsko"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Setting Default Printer..."
-msgstr "Nastavuji vĂœchozĂ­ tiskĂĄrnu..."
+msgid "No known driver"
+msgstr "NenĂ­ rozpoznĂĄn ĆŸĂĄdnĂœ ovladač"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Installing %s ..."
-msgstr "Instaluji %s ..."
+msgid "1 MB"
+msgstr "1 MB"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Removing %s ..."
-msgstr "Odstraƈuji %s ..."
+msgid ""
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
+msgstr ""
+"Pokud nenĂ­ mezi nimi poĆŸadovanĂĄ tiskĂĄrna, zadejte do políčka nĂĄzev zaƙízenĂ­/"
+"nĂĄzev souboru"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksound:1
#, c-format
msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"TiskovĂœ systĂ©m (%s) nebude automaticky spuĆĄtěn pƙi startu počítače.\n"
+"You can visit our hardware database at:\n"
"\n"
-"Je moĆŸnĂ©, ĆŸe volba automatickĂ©ho startu byla vypnuta ve vyĆĄĆĄĂ­ bezpečnostnĂ­ "
-"Ășrovni, protoĆŸe tiskovĂœ systĂ©m je potenciĂĄlnĂ­ nebezpečí pro sĂ­Ć„ovĂœ Ăștok.\n"
"\n"
-"Chcete nastavit zpět automatickĂœ start tiskovĂ©ho systĂ©mu?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Spustit tiskovĂœ systĂ©m pƙi startu systĂ©mu"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
+msgstr ""
+"V počítači nebyla nalezena ĆŸĂĄdnĂĄ zvukovĂĄ karta karta. Zkontrolujte prosĂ­m,"
+"zda podporovaná karta je správně zapojena.\n"
"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"PokouĆĄĂ­te se instalovat tiskovĂœ systĂ©m %s na počítač, bÄ›ĆŸĂ­cĂ­ v bezpečnostĂ­ "
-"Ășrovni %s.\n"
+"Databåzi hardware lze nalézt na:\n"
"\n"
-"TiskovĂœ systĂ©m pracuje jako dĂ©mon (proces na pozadĂ­), kterĂœ čekĂĄ na tiskovĂ© "
-"Ășlohy a zpracovĂĄvĂĄ je. Tento dĂ©mon je takĂ© pƙístupnĂœ ze sĂ­tě pro jinĂ© "
-"počítače, takĆŸe se mĆŻĆŸe stĂĄt pƙedmětem sĂ­Ć„ovĂ©ho Ăștoku. Proto je vybrĂĄno "
-"pouze několik sluĆŸeb, kterĂ© jsou v tĂ©to Ășrovni spuĆĄtěny automaticky pƙi "
-"startu.\n"
"\n"
-"Chcete opravdu nastavit tiskovĂœ systĂ©m na tomto počítači?"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Instaluji tiskovĂœ systĂ©m v bezpečnostnĂ­ Ășrovni %s"
+msgid "Configure Local Area Network..."
+msgstr "Nastavuji lokĂĄlnĂ­ sĂ­Ć„..."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "paranoid"
-msgstr "paranoidnĂ­"
+msgid "Launch the sound system on your machine"
+msgstr "Spustit zvukovĂœ systĂ©m pƙi startu"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "high"
-msgstr "vysokĂĄ"
+msgid "Preparing printer database..."
+msgstr "Načítám databázi tiskáren ..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Restarting printing system..."
-msgstr "Restartuji tiskovĂœ systĂ©m ..."
+msgid "Information"
+msgstr "Informace"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Configuration of a remote printer"
-msgstr "Nastavení vzdålené tiskårny"
+msgid "No network card"
+msgstr "ĆœĂĄdnĂĄ sĂ­Ć„ovĂĄ karta"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"SĂ­Ć„ nefunguje a nelze ji spustit. ProsĂ­m zkontrolujte nastavenĂ­ hardware. "
-"Pak se opět pokuste provĂ©st nastavenĂ­ vzdĂĄlenĂ© tiskĂĄrny."
+msgid "Which filesystem do you want?"
+msgstr "KterĂœ souborovĂœ systĂ©m chcete pouĆŸĂ­t?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"NastavenĂ­ sĂ­tě provedenĂ© pƙi instalaci nelze nynĂ­ aktivovat. Zkontrolujte, "
-"zda je sĂ­Ć„ dostupnĂĄ po spuĆĄtěnĂ­ systĂ©mu a nastavenĂ­ opravte v ovlĂĄdacĂ­m "
-"centru Mandrake, v sekci \"SĂ­Ć„ a Internet\"/\"PƙipojenĂ­\" a nĂĄsledně "
-"nastavte tiskårnu také v ovlådacím centru v sekci \"Hardware\"/\"Tiskårna\""
+msgid "3 buttons"
+msgstr "3 tlačítka"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configure the network now"
-msgstr "Nastavit sĂ­Ć„ nynĂ­"
+msgid "Detailed information"
+msgstr "Podrobné informace"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Go on without configuring the network"
-msgstr "Pokračovat bez nastavení sítě"
+msgid "Malta"
+msgstr "Malta"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
+"Printer default settings\n"
+"\n"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
msgstr ""
-"NynĂ­ začne konfigurace vzdĂĄlenĂ© tiskĂĄrny. To vyĆŸaduje funkčnĂ­ sĂ­Ć„ovĂ© "
-"spojenĂ­, ale sĂ­Ć„ nenĂ­ zatĂ­m nastavena. Pokud budete pokračovat bez nastavenĂ­ "
-"sĂ­tě, nebude moĆŸnĂ© pouĆŸĂ­t tiskĂĄrnu, kterou poĆŸadujete. Jak chcete pokračovat?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Network functionality not configured"
-msgstr "SĂ­Ć„ nenĂ­ nastavena"
+"VĂœchozĂ­ nastavenĂ­ pro tiskĂĄrnu\n"
+"\n"
+"Ujistěte se, ĆŸe typ strĂĄnky a typ inkoustu/reĆŸim tisku (pokud je) a takĂ© "
+"hardwarovĂĄ konfigurace laserovĂ© tiskĂĄrny (paměƄ, duplexnĂ­ jednotka, externĂ­ "
+"podavač) jsou nastaveny sprĂĄvně. Pƙi tisku ve velmi vysokĂ© kvalitě/rozliĆĄenĂ­ "
+"bude tisk zƙejmě pomalejơí."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Starting network..."
-msgstr "SpouĆĄtĂ­m sĂ­Ć„ ...."
+msgid "This floppy is not FAT formatted"
+msgstr "Tato disketa nenĂ­ formĂĄtovĂĄna"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Refreshing printer data..."
-msgstr "Občerstvuji tisková data ...."
+msgid "Configuring network"
+msgstr "Nastavuji sĂ­Ć„"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Byla pƙenesena vĂœchozĂ­ tiskĂĄrna (\"%s\"). MĂĄ se nastavit jako vĂœchozĂ­ takĂ© "
-"na vzdåleném tiskovém systému %s?"
+msgid "Graphic Card"
+msgstr "GrafickĂĄ karta"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Transfer printer configuration"
-msgstr "PƙenĂ©st konfiguraci tiskĂĄrny"
+msgid "Resizing Windows partition"
+msgstr "PočítĂĄm hranice souborovĂ©ho systĂ©mu s Windows"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Transferring %s..."
-msgstr "Pƙenáơím %s ..."
+msgid "Provider dns 1 (optional)"
+msgstr "DNS poskytovatele č.1 (volitelnĂ©)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "New printer name"
-msgstr "NovĂœ nĂĄzev tiskĂĄrny"
+msgid "Cameroon"
+msgstr "Kamerun"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
msgstr ""
-"TiskĂĄrna s nĂĄzvem %s jiĆŸ existuje,\n"
-"chcete opravdu pƙepsat její konfiguraci?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "NĂĄzev fronty mĆŻĆŸe obsahovat pouze pĂ­smena, číslice a podtrĆŸĂ­tko"
+"NynĂ­ mĆŻĆŸete rozdělit vĂĄĆĄ pevnĂœ disk %s.\n"
+"AĆŸ skončíte, nezapomeƈte uloĆŸit změny pomocĂ­ 'w'"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Transfer"
-msgstr "PƙenĂ©st"
+msgid "Close"
+msgstr "Zavƙít"
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
msgstr ""
-"TiskĂĄrna s nĂĄzvem \"%s\" jiĆŸ na straně %s existuje.\n"
-"Klepněte na \"PƙenĂ©st\" pro pƙepsĂĄnĂ­.\n"
-"TakĂ© mĆŻĆŸete napsat novĂœ nĂĄzev nebo ji pƙeskočit."
+"\"Země\": zkontrolujte aktuĂĄlnĂ­ vĂœběr země. Pokud nejste v danĂ© zemi, "
+"klepněte\n"
+"na tlačítko \"Nastavit\" a vyberte si jinou. Pokud vaơe země na prvním "
+"seznamu,\n"
+"klepněte na tlačítko \"Více\" a získáte kompletní seznam zemí."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Do not transfer printers"
-msgstr "Nepƙenáơet tiskárny"
+msgid "Calendar"
+msgstr "Kalendáƙ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
+"Restore Selected\n"
+"Catalog Entry"
msgstr ""
-"\n"
-"Označte tiskĂĄrnu, kterou chcete pƙenĂ©st a stiskněte \"PƙenĂ©st\"."
+"VybrĂĄna obnova\n"
+"ZĂĄznam katalogu"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
msgstr ""
-"\n"
-"TakĂ© tiskĂĄrny pouĆŸĂ­vajĂ­cĂ­ PPD soubory od jejich vĂœrobcĆŻ nebo tiskĂĄrny s "
-"nativnĂ­mi ovladači pro CUPS nelze pƙenĂ©st."
+"Abyste mohli pouĆŸĂ­vat vzdĂĄlenou tiskovou frontu lpd, musĂ­te zadat nĂĄzev "
+"tiskovĂ©ho serveru a nĂĄzev tiskĂĄrny, kam mĂĄ bĂœt posĂ­lĂĄn tisk."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"TiskovĂ© fronty, kterĂ© nebyly vytvoƙeny tĂ­mto programem nebo pƙes \"foomatic-"
-"configure\" nelze pƙenĂ©st."
+msgid "Iceland"
+msgstr "Island"
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD ani LprNG nepodporujĂ­ IPP tiskĂĄrny.\n"
+msgid "consolehelper missing"
+msgstr "chybĂ­ consolehelper"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ podporuje pouze místní tiskårny, vzdålené tiskårny LPD a tisk na "
-"tiskárny pƙes sokety/TCP.\n"
+msgid "stopped"
+msgstr "zastaveno"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS nepodporuje tiskårny na serverech Novell nebo tiskårny, které posílají "
-"data na skupinu pƙíkazƯ.\n"
+msgid "Whether the FPU has an irq vector"
+msgstr "Zda mĂĄ FPU irq vektor"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Konfiguraci tiskĂĄrny, kterou jste provedli pro frontu %s lze pƙenĂ©st na "
-"frontu %s, tj. na současnou frontu. Vơechna nastavená data (název tiskárny, "
-"popis, umĂ­stěnĂ­, typ pƙipojenĂ­ a dalĆĄĂ­ vĂœchozĂ­ nastavenĂ­) budou pƙepsĂĄna, "
-"ale tiskovĂ© Ășlohy nebudou pƙeneseny.\n"
-"Ne vĆĄechny fronty lze pƙenĂ©st z nĂĄsledujĂ­cĂ­ch dĆŻvodĆŻ:\n"
+msgid "Ext2"
+msgstr "Ext2"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-"VaĆĄe tiskĂĄrna byla automaticky nastavena tak, ĆŸe mĂĄte ze svĂ©ho PC pƙístup ke "
-"čtečce karty. NynĂ­ mĆŻĆŸete pƙistupovat ke svĂœm fotografickĂœm kartĂĄm pomocĂ­ "
-"grafického programu \"MtoolsFM\" (Menu: \"Aplikace\" -> \"Souborové nåstroje"
-"\" -> \"SprĂĄvce souborĆŻ MTools\") nebo z pƙíkazovĂ© ƙádky pomocĂ­ nĂĄstroje "
-"\"mtools\" (zadejte \"man mtools\", chcete-li zĂ­skat vĂ­ce informacĂ­). "
-"SouborovĂœ systĂ©m vaĆĄi karty naleznete pod pĂ­smenem zaƙízenĂ­ \"p:\", pƙípadně "
-"dalơích písmenech, pokud máte více tiskáren HP se čtečkou karet. V programu "
-"\"MtoolsFM\" mĆŻĆŸete pƙepĂ­nat mezi pĂ­smeny zaƙízenĂ­ pomocĂ­ políčka v pravĂ©m "
-"hornĂ­m rohu kaĆŸdĂ©ho vĂœÄtu souborĆŻ."
+msgid "Expand Tree"
+msgstr "Rozbalit větev"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
+"The old \"%s\" driver is blacklisted.\n"
"\n"
-"Do not use \"scannerdrake\" for this device!"
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-"MultifunkčnĂ­ zaƙízenĂ­ od HP bylo automaticky nastaveno pro moĆŸnost "
-"skenovĂĄnĂ­. NynĂ­ lze skenovat z pƙíkazovĂ©ho ƙádku pƙíkazem \"scanimage"
-"\" (pƙíkazem \"scanimage -d hp:%s\" zvolĂ­te poĆŸadovanĂœ skener, pokud jich "
-"mĂĄte vĂ­ce) nebo z grafickĂ©ho prostƙedĂ­ pomocĂ­ \"xscanimage\" nebo \"xsane\". "
-"Pokud pouĆŸĂ­vĂĄte program GIMP, mĆŻĆŸete takĂ© skenovat vĂœběrem z nabĂ­dky \"Soubor"
-"\"/\"ZĂ­skat\". VĂ­ce informacĂ­ zĂ­skĂĄte takĂ© pƙíkazem \"man scanimage\" "
-"spuĆĄtěnĂœm na pƙíkazovĂ© ƙádce.\n"
+"StarĆĄĂ­ ovladač \"%s\" je na černĂ© listině.\n"
"\n"
-"NepouĆŸĂ­vejte pro toto zaƙízenĂ­ \"scannerdrake\"!"
+"Bylo u něj zjiĆĄtěno, ĆŸe pƙi odebrĂĄnĂ­ zpĆŻsobĂ­ pĂĄd jĂĄdra.\n"
+"\n"
+"Pƙi dalĆĄĂ­m spuĆĄtěnĂ­ bude pouĆŸit pouze novĂœ ovladač \"%s\" "
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Printing test page(s)..."
-msgstr "Tisknu testovacĂ­ strĂĄnku(y)"
+msgid "Expert Mode"
+msgstr "ExpertnĂ­ reĆŸim"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Print option list"
+msgid "Printer options"
msgstr "MoĆŸnosti tiskĂĄrny"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Tisknu na tiskĂĄrnu \"%s\""
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Tisk/Pƙístup k foto kartám na \"%s\""
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Tisk/SkenovĂĄnĂ­ na \"%s\""
+msgid "Local Network adress"
+msgstr "Adresa lokální sítě"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Tisk/SkenovĂĄnĂ­/Foto karty na \"%s\""
+msgid "Backup your System files. (/etc directory)"
+msgstr "ZĂĄlohovat vaĆĄe systĂ©movĂ© soubory. (adresáƙ /etc)"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
+"\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
"\n"
+"Do you want to install the updates ?"
msgstr ""
-"VĆĄechny moĆŸnosti dostupnĂ© pro současnou tiskĂĄrnu jsou vypsĂĄny nĂ­ĆŸe, nebo "
-"klepněte na tlačítko \"MoĆŸnosti tiskĂĄrny\".%s%s%s\n"
+"NynĂ­ mĂĄte moĆŸnost stĂĄhnout aktualizovanĂ© balíčky. Tyto balíčky byly\n"
+"uvolněny aĆŸ po vydĂĄnĂ­ distribuce. Mohou obsahovat bezpečnostnĂ­\n"
+"aktualizace nebo opravy chyb.\n"
"\n"
+"Chcete-li získat tyto balíčky, musíte mít k dispozici funkční pƙipojení\n"
+"k Internetu.\n"
+"\n"
+"Chcete nainstalovat aktualizace?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Samba Server"
+msgstr "Server Samba"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg, alert=1)\n"
"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
+"Enable/Disable IP spoofing protection."
msgstr ""
+"Argumenty: (arg, alert=1)\n"
"\n"
-"Pƙíkazy \"%s\" a \"%s\" dovolujĂ­ měnit volby pro kaĆŸdou tiskovou Ășlohu. "
-"JednoduĆĄe zadejte potƙebnĂ© nastavenĂ­ do pƙíkazovĂ© ƙádky, napƙ. \"%s <soubor>"
-"\".\n"
+"PovolĂ­/ZakĂĄĆŸe ochranu pƙed IP spoofing."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Lze takĂ© pouĆŸĂ­t grafickĂ© rozhranĂ­ \"xpdq\" pro nastavenĂ­ moĆŸnostĂ­ a ke "
-"sprĂĄvě tiskovĂœch Ășloh.\n"
-"Pokud pouĆŸĂ­vĂĄte grafickĂ© prostƙedĂ­ KDE, mĂĄte na pracovnĂ­ ploĆĄe ikonu "
-"pojmenovanou \"STOP Printer!\", kterĂœ po klepnutĂ­ ihned zastavĂ­ vĆĄechny "
-"tiskovĂ© Ășlohy. To je vhodnĂ© tƙeba pro pƙípady uvĂ­znutĂ­ papĂ­ru.\n"
+msgid "Australian Optus cable TV"
+msgstr "AustralskĂĄ kabelovĂĄ televize Optus"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
msgstr ""
-"Tento pƙíkaz lze nastavit do políčka \"Pƙíkazy tisku\" v dialogu tisku ve "
-"větĆĄině aplikacĂ­, ale nezadĂĄvĂĄ se zde nĂĄzev souboru, kterĂ© je pokaĆŸdĂ© jinĂ© v "
-"zåvislosti na dané aplikaci.\n"
+" <Tab>/<Alt-Tab> pƙepn. mezi prvky | <Space> vĂœběr | <F12> dalĆĄĂ­ obraz."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Pro vytiĆĄtěnĂ­ souboru z pƙíkazovĂ© ƙádky (v terminĂĄlovĂ©m okně) pouĆŸijte "
-"pƙíkaz \"%s <soubor>\" nebo \"%s <soubor>\".\n"
+msgid "Subnet:"
+msgstr "PodsĂ­Ć„:"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"VĆĄechny moĆŸnosti tisku pro současnou tiskĂĄrnu jsou zobrazeny nĂ­ĆŸe, nebo "
-"klepněte na tlačítko \"MoĆŸnosti tiskĂĄrny\"."
+msgid "Zimbabwe"
+msgstr "Zimbabwe"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Pƙíkaz \"%s\" dovoluje modifikovat volby pro kaĆŸdou tiskovou Ășlohu. "
-"JednoduĆĄe zadejte potƙebnĂ© nastavenĂ­ do pƙíkazovĂ© ƙádky, napƙ. \"%s<soubor>"
-"\". "
+msgid "Please enter the host name or IP."
+msgstr "Zadejte prosím název počítače nebo IP."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Pro vytiĆĄtěnĂ­ souboru z pƙíkazovĂ© ƙádky (v terminĂĄlovĂ©m okně) pouĆŸijte "
-"pƙíkaz \"%s <soubor>\".\n"
+msgid "When"
+msgstr "Kdy"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Second DNS Server (optional)"
+msgstr "DruhĂœ DNS Server (nepovinnĂœ)"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Finland"
+msgstr "Finsko"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Here is a list of the available printing options for the current printer:\n"
+"Arguments: (arg)\n"
"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
msgstr ""
-"Zde je seznam dostupnĂœch voleb pro nastavenĂ­ tisku pro aktuĂĄlnĂ­ tiskĂĄrnu:\n"
+"Argumenty: (arg)\n"
"\n"
+"Autorizuje vĆĄechny sluĆŸby kontrolovanĂ© tcp_wrappers (vĂ­ce hosts.deny(5)) "
+"pokud je nastaveno \\fIarg\\fP = ALL. Autorizuje\n"
+"pouze lokĂĄlnĂ­, pokud je nastaveno \\fIarg\\fP = LOCAL a nic pokud je\n"
+"nastaveno \\fIarg\\fP = NONE. VĂ­ce najdete v man hosts.allow(5)."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Tyto pƙíkazy lze nastavit do políčka \"Pƙíkazy tisku\" v dialogu tisku ve "
-"větĆĄině aplikacĂ­, ale nezadĂĄvĂĄ se zde nĂĄzev souboru, kterĂ© je pokaĆŸdĂ© jinĂ© v "
-"zåvislosti na dané aplikaci.\n"
+msgid "Color depth: %s\n"
+msgstr "BarevnĂĄ hloubka: %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Vytisknout soubor z pƙíkazovĂ© ƙádky (terminĂĄlovĂ©ho okna) lze buď pƙíkazem\n"
-"\"%s<soubor>\" nebo pƙes grafickĂ© nĂĄstroje: \"xpp <soubor> nebo \"kprinter "
-"<soubor>\". GrafickĂ© nĂĄstroje umoĆŸĆˆujĂ­ jednoduĆĄe vybrat tiskĂĄrny a měnit "
-"jejich parametry.\n"
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "Tento balíček musĂ­ bĂœt obnoven, nemĆŻĆŸete ho nezvolit"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Did it work properly?"
-msgstr "Proběhl tisk správně ?"
+msgid "Loading from floppy"
+msgstr "NahrĂĄvĂĄm z diskety"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
-"ZkuĆĄebnĂ­ strĂĄnka byl poslĂĄna na tiskĂĄrnu.\n"
-"MĆŻĆŸe chvilku trvat neĆŸ začne tisk.\n"
+"Aplikace DrakPerm se pouĆŸĂ­vĂĄ k zobrazenĂ­ souborĆŻ, kterĂ© se pouĆŸĂ­vajĂ­ k "
+"ĂșpravĂĄm oprĂĄvněnĂ­, vlastnĂ­kĆŻ a skupin aplikacĂ­ msec.\n"
+"MĆŻĆŸete takĂ© vytváƙet svĂĄ vlastnĂ­ pravidla, kterĂĄ pƙepĂ­ĆĄĂ­ pravidla vĂœchozĂ­."
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"ZkuĆĄebnĂ­ strĂĄnka(y) byla(y) poslĂĄna(y) na tiskĂĄrnu.\n"
-"MĆŻĆŸe chvilku trvat neĆŸ začne tisk.\n"
-"Stav tisku:\n"
-"%s\n"
-"\n"
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-2,*-r-*"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do not print any test page"
-msgstr "Netisknout testovacĂ­ strĂĄnku"
+msgid "Slovenia"
+msgstr "Slovinsko"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Photo test page"
-msgstr "TestovacĂ­ strĂĄnka s fotografiĂ­"
+msgid ""
+"Enter a user\n"
+"%s"
+msgstr ""
+"Zadejte uĆŸivatele\n"
+"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Alternative test page (A4)"
-msgstr "AlternativnĂ­ testovacĂ­ strĂĄnka (A4)"
+msgid ""
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
+msgstr ""
+"- zaƙízení PCI a USB: vypisuje se dodavatel, zaƙízení, subdodavatel a "
+"podzaƙízení (ID PCI/USB)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "AlternativnĂ­ testovacĂ­ strĂĄnka (Letter)"
+msgid "ProgressBar color selection"
+msgstr "VĂœběr barvy pro liĆĄtu s prĆŻběhem"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Standard test page"
-msgstr "StandardnĂ­ testovacĂ­ strĂĄnka"
+msgid ""
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
+msgstr ""
+"Tady jsou vĆĄechny zĂĄznamy.\n"
+"MĆŻĆŸete pƙidat dalĆĄĂ­ nebo změnit stĂĄvajĂ­cĂ­."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Print"
-msgstr "Tisk"
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "No test pages"
-msgstr "Bez testovacĂ­ strĂĄnky"
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
msgstr ""
-"Vyberte si testovacĂ­ strĂĄnku, kterou chcete vytisknout.\n"
-"PoznĂĄmka: tisk testovacĂ­ strĂĄnky s fotografiĂ­ mĆŻĆŸe trvat velmi dlouho nebo "
-"se na tiskárně s málo pamětí nemusí podaƙit vƯbec. Ve větơině pƙípadƯ stačí "
-"vytisknout bÄ›ĆŸnou testovacĂ­ strĂĄnku."
+"SpouĆĄtĂ­ pƙíkazy naplĂĄnovanĂ© pƙíkazem na určitĂœ čas pƙíkazem 'at'.\n"
+"TakĂ© spouĆĄtĂ­ pƙíkazy pƙi nĂ­zkĂ©m vytĂ­ĆŸenĂ­ systĂ©mu."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Test pages"
-msgstr "TestovacĂ­ strĂĄnka"
+msgid "Radio support:"
+msgstr "Podpora rĂĄdia :"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Chcete opravdu nastavit tiskĂĄrnu \"%s\"\n"
-"jako vĂœchozĂ­?"
+msgid "Installing SANE packages..."
+msgstr "Instaluji balíčky pro SANE..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Option %s out of range!"
-msgstr "Hodnota %s je mimo rozsah!"
+msgid "boot disk creation"
+msgstr "vytváƙení zaváděcích disket"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Option %s must be a number!"
-msgstr "Hodnota %s musĂ­ bĂœt číslo!"
+msgid "LDAP"
+msgstr "LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Hodnota %s musĂ­ bĂœt celĂ© číslo!"
+msgid "SILO"
+msgstr "SILO"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
#, c-format
-msgid "Printer default settings"
-msgstr "VĂœchozĂ­ nastavenĂ­ tiskĂĄrny"
+msgid "Change type"
+msgstr "Změnit typ"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "SILO Installation"
+msgstr "Instalace SILO"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use CD/DVDROM to backup"
+msgstr "PouĆŸĂ­t pro zĂĄlohovĂĄnĂ­ CD/DVD-ROM"
+
+#: ../../install_messages.pm:1
#, c-format
msgid ""
-"Printer default settings\n"
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
-"VĂœchozĂ­ nastavenĂ­ pro tiskĂĄrnu\n"
+"Gratulujeme vám, instalace je dokončena.\n"
+"Vyjměte startovacĂ­ mĂ©dia a stiskněte Return pro restart.\n"
"\n"
-"Ujistěte se, ĆŸe typ strĂĄnky a typ inkoustu/reĆŸim tisku (pokud je) a takĂ© "
-"hardwarovĂĄ konfigurace laserovĂ© tiskĂĄrny (paměƄ, duplexnĂ­ jednotka, externĂ­ "
-"podavač) jsou nastaveny sprĂĄvně. Pƙi tisku ve velmi vysokĂ© kvalitě/rozliĆĄenĂ­ "
-"bude tisk zƙejmě pomalejơí."
+"\n"
+"Na opravy této instalace systému Mandrake Linux se lze informovat\n"
+"na strĂĄnce Errata:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Informace o konfiguraci systému po instalaci jsou dostupné\n"
+"v danĂ© kapitole oficiĂĄlnĂ­ uĆŸivatelskĂ© pƙíručky pro Mandrake Linux."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr "Upload firmware pro HP LaserJet 1000"
+msgid "paranoid"
+msgstr "paranoidnĂ­"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Send mail report after each backup to:"
+msgstr "Poslat report po zĂĄloze mailem na :"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+"This command you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications. But here do not supply the file name "
+"because the file to print is provided by the application.\n"
msgstr ""
-"Aby bylo moĆŸnĂ© pƙi tomto nastavenĂ­ tisknout na inkoustovĂœch tiskĂĄrnĂĄch od "
-"firmy Lexmark, je potƙeba mĂ­t tiskovĂœ ovladač poskytovanĂœ společnostĂ­ "
-"Lexmark (http://www.lexmark.com/). Klepněte na odkaz \"Drivers\", vyberte "
-"vĂĄĆĄ model tiskĂĄrny, a potĂ© zvolte Linux jako operačnĂ­ systĂ©m. Ovladače jsou "
-"v RPM balíčcích nebo skripty shellu s interaktivní grafickou instalací. Tu "
-"ale k nastavenĂ­ vaĆĄeho systĂ©mu nepotƙebujete. Ukončete instalačnĂ­ program "
-"ihned po odsouhlasenĂ­ licence. Pak mĆŻĆŸete vytisknout strĂĄnku s nastavenĂ­m "
-"tiskovĂœch hlav programem \"lexmarkmaintain\" a nastavit zarovnĂĄnĂ­ tiskovĂ© "
-"hlavy pomocĂ­ tohoto programu."
+"Tento pƙíkaz lze nastavit do políčka \"Pƙíkazy tisku\" v dialogu tisku ve "
+"větĆĄině aplikacĂ­, ale nezadĂĄvĂĄ se zde nĂĄzev souboru, kterĂ© je pokaĆŸdĂ© jinĂ© v "
+"zåvislosti na dané aplikaci.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Nastavení inkoustové tiskårny Lexmark"
+msgid "Resolution"
+msgstr "RozliĆĄenĂ­"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
msgstr ""
-"Inkoustové tiskårny dodåvané firmou Lexmark podporují pouze tisk na lokålní "
-"tiskĂĄrně, takĆŸe nelze tisknout pƙes vzdĂĄlenĂœ server. ProsĂ­m pƙipojte "
-"tiskĂĄrnu na lokĂĄlnĂ­ port nebo ji nastavte na tom počítači, ke kterĂ©mu bude "
-"pƙipojena."
+"Abyste mohli tisknout na SMB tiskárně, musíte zadat název SMB počítače"
+"(Pozor! To mĆŻĆŸe bĂœt odliĆĄnĂ© od jeho TCP/IP nĂĄzvu) a moĆŸnĂĄ i IP adresu "
+"tiskovĂ©ho serveru, nĂĄzev sdĂ­lenĂ© tiskĂĄrny, vhodnĂ© uĆŸivatelskĂ© jmĂ©no, heslo a "
+"informace o pracovní skupině."
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse icmp echo."
msgstr ""
-"NynĂ­ nastavujete laserovou tiskĂĄrnu OKI winprinter. Tyto tiskĂĄrny pouĆŸĂ­vajĂ­ "
-"velmi specifickĂœ komunikačnĂ­ protokol a mohou pracovat pouze pokud jsou "
-"pƙipojeny k prvnĂ­mu paralelnĂ­mu portu. Pokud je tiskĂĄrna pƙipojena na jinĂœ "
-"port, nebo se tiskne pƙes server, pƙipojte tiskárnu na první paralelní port. "
-"Jinak tisk nebude pracovat. Typ pƙipojení bude ovladač ignorovat."
+"Argumenty: (arg)\n"
+"\n"
+"Akceptuje/OdmĂ­tne icmp echo."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "OKI winprinter configuration"
-msgstr "NastavenĂ­ pro OKI win-tiskĂĄrnu"
+msgid "reconfigure"
+msgstr "pƙekonfigurovat"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
-"Pokud nenĂ­ tiskĂĄrna v seznamu, vyberte kompatibilnĂ­ nebo podobnĂœ model "
-"(podĂ­vejte se do manuĂĄlu)"
+"S XFree %s mĆŻĆŸe vaĆĄe karta vyuĆŸĂ­t 3D hardwarovĂ© akcelerace.\n"
+" TOTO JE POUZE EXPERIMENTÁLNÍ VERZE, A MĆźĆœE VÉST K NESTABILITĚ SYSTÉMU."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
-"\n"
-"\n"
-"Zkontrolujte prosĂ­m, zda PrinterDrake provedl automatickou detekci modelu "
-"sprĂĄvně. Pokud je vyznačen nesprĂĄvnĂœ model, mĆŻĆŸete ho změnit vĂœběrem ze "
-"seznamu nebo zvolte \"PƙímĂœ tisk\"."
+msgid "Xinetd Service"
+msgstr "SluĆŸba Xinetd"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which printer model do you have?"
-msgstr "JakĂœ model tiskĂĄrny mĂĄte?"
+msgid "access to network tools"
+msgstr "pƙístup k sĂ­Ć„ovĂœm nĂĄstrojĆŻm"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer model selection"
-msgstr "VĂœběr modelu tiskĂĄrny"
+msgid "Firmware-Upload for HP LaserJet 1000"
+msgstr "Upload firmware pro HP LaserJet 1000"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Reading printer database..."
-msgstr "Načítám databázi tiskáren ..."
+msgid ""
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
+msgstr ""
+"Mandrake Linux 9.1 vĂĄm dovoluje naplno vyuĆŸĂ­t poslednĂ­ software pro "
+"pƙehrávání hudebních souborƯ, editovat či pracovat s vaơimi obrázky nebo "
+"fotografiemi, či sledovat video."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select model manually"
-msgstr "Vybrat model ručně"
+msgid "Here is a list of all auto-detected printers. "
+msgstr "Zde je seznam automaticky detekovanĂœch tiskĂĄren. "
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The model is correct"
-msgstr "ZvolenĂœ model je sprĂĄvnĂœ"
+msgid ""
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
+msgstr ""
+"Stala se chyba pƙi instalaci aboot,\n"
+"mĂĄm se pokusit o instalaci i kdyĆŸ to zruĆĄĂ­ prvnĂ­ oddĂ­l na disku?"
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
+"Options Description:\n"
"\n"
-"For your printer Printerdrake has found:\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
-"%s"
msgstr ""
-"PrinterDrake provedl porovnĂĄnĂ­ modelu tiskĂĄrny, kterĂœ byl zjiĆĄtěn pƙi auto-"
-"detekci s modelem obsaĆŸenĂœm v jeho databĂĄzi a nabĂ­dl nejlepĆĄĂ­ ƙeĆĄenĂ­. Tato "
-"volba mĆŻĆŸe bĂœt ĆĄpatnĂĄ, zvlĂĄĆĄĆ„ pokud nenĂ­ tiskĂĄrna obsaĆŸena v databĂĄzi. "
-"Zkontrolujte, zda je volba sprĂĄvnĂĄ a klepněte na \"ZvolenĂœ model je sprĂĄvnĂœ"
-"\" a pokud není, volte \"Vybrat model ručně\". V dalơí obrazovce potom bude "
-"moĆŸnĂ© vybrat model tiskĂĄrny ručně.\n"
+"Popis voleb:\n"
"\n"
-"Pro vaĆĄi tiskĂĄrnu PrinterDrake nalezl:\n"
+" V tomto kroku vĂĄm aplikace DrakBackup umoĆŸnĂ­ změnit:\n"
+"\n"
+" - ReĆŸim komprese:\n"
+" \n"
+" Pokud zvolĂ­te kompresi bzip2, budete mĂ­t kompresi\n"
+" lepĆĄĂ­ neĆŸ pomocĂ­ gzip (okolo 2-10%%).\n"
+" Tato volba nenĂ­ zvolena jako vĂœchozĂ­, protoĆŸe\n"
+" vyĆŸaduje daleko vĂ­ce času (aĆŸ o 1000%% vĂ­ce).\n"
+"\n"
+" - ReĆŸim aktualizace:\n"
+"\n"
+" Tato volba aktualizuje zĂĄlohu, ale nenĂ­ moc uĆŸitečnĂĄ,\n"
+" protoĆŸe pƙed aktualizacĂ­ musĂ­te nejdƙíve zĂĄlohu\n"
+" dekomprimovat.\n"
+" \n"
+"- ReĆŸim pouĆŸitĂ­ souboru .backupignore:\n"
+"\n"
+" Stejně jako pro cvs, i pro DrakBackup lze uvĂ©st seznam\n"
+" souborĆŻ v .backupignore, kterĂ© budou pƙi zĂĄlohovĂĄnĂ­ ignorovĂĄny.\n"
+" napƙ.:\n"
+" \\$> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
-"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Your printer model"
-msgstr "Model tiskĂĄrny"
+msgid ""
+"Restore Selected\n"
+"Files"
+msgstr ""
+"VybrĂĄna obnova\n"
+"Soubory"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Preparing printer database..."
-msgstr "Načítám databázi tiskáren ..."
+msgid ""
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
+msgstr ""
+"%s existuje, smazat?\n"
+"\n"
+"VarovĂĄnĂ­: Pokud jste tak jiĆŸ jednou učinili, budete nejspĂ­ĆĄ muset\n"
+"vymazat pƙísluĆĄnĂœ zĂĄznam ze souboru authorized_keys na serveru."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Location"
-msgstr "Umístění"
+msgid "Please fill or check the field below"
+msgstr "ProsĂ­m vyplƈte nebo zkontrolujte nĂĄsledujĂ­cĂ­ Ășdaje"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Description"
-msgstr "Popis"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "Chcete uloĆŸit Ășpravy souboru /etc/fstab?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Name of printer"
-msgstr "NĂĄzev tiskĂĄrny"
+msgid "Boot Protocol"
+msgstr "Protokol o spuơtění"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"KaĆŸdĂĄ tiskĂĄrna potƙebuje nĂĄzev (napƙ. \"tiskarna\"). Popis a umĂ­stěnĂ­ nemusĂ­ "
-"bĂœt vyplněny. Jsou to komentáƙe pouze pro uĆŸivatele."
+msgid "LVM-disks %s\n"
+msgstr "LVM disky %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr "Zadejte název tiskárny a komentáƙ"
+msgid "The package %s is needed. Install it?"
+msgstr "Balíček %s musĂ­ bĂœt nainstalovĂĄn. Chcete ho nainstalovat?"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr "Nastavuji tiskovĂœ port vyuĆŸitelnĂœ pro CUPS..."
+msgid "On boot"
+msgstr "Pƙi spuơtění"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Checking device and configuring HPOJ..."
-msgstr "Testuji zaƙízení a nastavuji HPOJ..."
+msgid "Bus identification"
+msgstr "Identifikace sběrnice"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr "Pƙístup k paměƄovĂ© kartě na multifunkčnĂ­m zaƙízenĂ­ od HP"
+msgid "Please make a backup of your data first"
+msgstr "Zálohujte si nejdƙív svá data, prosím"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr "Vyhledávám multifunkční zaƙízení od HP"
+msgid "Vatican"
+msgstr "VatikĂĄn"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Installing mtools packages..."
-msgstr "Instaluji balíčky pro mtools..."
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr "MĂĄte vĂ­ce neĆŸ jeden pevnĂœ disk, na kterĂœ chcete instalovat Linux?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Installing SANE packages..."
-msgstr "Instaluji balíčky pro SANE..."
+msgid "Boot ISO"
+msgstr "Spouơtěcí ISO"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installing HPOJ package..."
-msgstr "Instaluji balíček HPOJ..."
+msgid "Eritrea"
+msgstr "Eritrea"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
-"Je vaơe tiskárna multifunkční zaƙízení od HP nebo od Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 se skenerem, Sony IJP-V100) nebo HP "
-"PhotoSmart či HP LaserJet 2200?"
+msgid "Remove List"
+msgstr "Odebrat seznam"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
-msgid "A command line must be entered!"
-msgstr "MusĂ­ bĂœt zadĂĄn nějakĂœ pƙíkaz!"
+msgid "A customizable environment"
+msgstr "PƙizpĆŻsobitelnĂ© prostƙedĂ­"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Command line"
-msgstr "Pƙíkazová ƙádka"
+msgid "Inuktitut"
+msgstr "Inuktitutské"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
-"Zde mĆŻĆŸete zadat libovolnĂœ pƙíkaz, do kterĂ©ho bude posĂ­lĂĄm vĂœstup z tiskovĂ© "
-"Ășlohy mĂ­sto pƙímĂ©ho odeslĂĄnĂ­ na tiskĂĄrnu."
+msgid "Morocco"
+msgstr "Maroko"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pipe into command"
-msgstr "Poslat do pƙíkazu"
+msgid "Which printer model do you have?"
+msgstr "JakĂœ model tiskĂĄrny mĂĄte?"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detected model: %s %s"
-msgstr "Nalezen model: %s %s"
+msgid "Add a new printer"
+msgstr "Pƙidat novou tiskárnu"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A valid URI must be entered!"
-msgstr "MusĂ­ bĂœt zadĂĄno sprĂĄvnĂ© URI!"
+msgid " All of your selected data have been "
+msgstr " VĆĄechna vybranĂĄ data byla "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Printer Device URI"
-msgstr "URI TiskovĂ©ho ZaƙízenĂ­"
+msgid "<-- Delete"
+msgstr "<-- Smazat"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Zde lze pƙímo zadat URI pro pƙístup k tiskárně. URI musí splƈovat buď "
-"specifikaci CUPS nebo Foomatic. TakĂ© pamatujte na to, ĆŸe vĆĄechny URI nejsou "
-"podporovĂĄny ve vĆĄech tiskovĂœch sprĂĄvcĂ­ch."
+msgid "Nepal"
+msgstr "NepĂĄl"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Port"
-msgstr "Port"
+msgid "cpu # "
+msgstr "cpu #"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printer host name or IP"
-msgstr "NĂĄzev nebo IP adresa tiskĂĄrny"
+msgid "chunk size"
+msgstr "Velikost bloku (chunk)"
-#: ../../printer/printerdrake.pm:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "The port number should be an integer!"
-msgstr "Číslo portu musĂ­ bĂœt celĂ© číslo!"
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "spoustecich parametru, nebo 'c' pro prikazovou radku."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "ChybĂ­ nĂĄzev nebo IP adresa tiskĂĄrny!"
+msgid "Problems installing package %s"
+msgstr "ProblĂ©m s instalacĂ­ balíčku %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"Abyste mohli tisknout na TCP nebo soketovĂ© tiskĂĄrně, musĂ­te zadat nĂĄzev nebo "
-"IP adresu tiskĂĄrny a volitelně i číslo portu (vĂœchozĂ­ je 9100). V pƙípadě "
-"serverĆŻ HP JetDirect je číslo portu obvykle 9100, u jinĂœch serverĆŻ mĆŻĆŸe bĂœt "
-"jiné. Podívejte se do manuålu k vaƥemu hardware."
+msgid "You will receive an alert if the load is higher than this value"
+msgstr "Pokud bude hodnota vetĆĄĂ­ neĆŸ zadanĂ© číslo, obdrĆŸĂ­te varovnou zprĂĄvu"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
msgstr ""
-"Vyberte ze seznamu jednu z automaticky nalezenĂœch tiskĂĄren nebo zadejte do "
-"políček nĂĄzev nebo IP adresu tiskĂĄrny a volitelně číslo portu (vĂœchozĂ­ je "
-"9100)."
+"\n"
+"\n"
+"Chcete-li poslat hláơení o chybě, klepněte na tlačítko pro nahláơení chyby.\n"
+"Otevƙe se okno prohlĂ­ĆŸeče sĂ­tě Internet na adrese https://drakbug."
+"mandrakesoft.com,\n"
+"kde najdete formuláƙ k vyplněnĂ­. VĂœĆĄe zobrazenĂ© informace budou na tento "
+"server\n"
+"rovnÄ›ĆŸ pƙeneseny.\n"
+"\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "MoĆŸnosti tiskĂĄrny pro TCP/Socket"
+msgid "Add a scanner manually"
+msgstr "Pƙidat skener ručně"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Host \"%s\", port %s"
-msgstr "Počítač \"%s\", port %s"
+msgid "Reload partition table"
+msgstr "Znovu načíst tabulku oddílƯ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", počítač \"%s\", port %s"
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr "Ano, chci automatickĂ© pƙihlĂĄĆĄenĂ­ s tĂ­mto (uĆŸivatelem, desktopem)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Scanning network..."
-msgstr "ZkoumĂĄm sĂ­Ć„...."
+msgid "Search for fonts in installed list"
+msgstr "Hledat fonty mezi instalovanĂœmi"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Printer auto-detection"
-msgstr "Autodetekce tiskĂĄrny"
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr "Číslo lokální sítě nekončí na .0, zkouơím znovu."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "NCP queue name missing!"
-msgstr "Chybí nåzev tiskové fronty pro NCP!"
+msgid "Boot"
+msgstr "Spuơtění"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "NCP server name missing!"
-msgstr "Chybí název pro sdílení pƙes NCP!"
+msgid "Tuner type:"
+msgstr "Typ tuneru :"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Print Queue Name"
-msgstr "Nåzev tiskové fronty"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
+msgstr ""
+"Zde si mĆŻĆŸete vybrat tiskovĂœ systĂ©m, kterĂœ budete pouĆŸĂ­vat. JinĂ© OS "
+"nabĂ­zejĂ­\n"
+"jeden, Mandrake nabĂ­zĂ­ dva. KaĆŸdĂœ z nich je nejvhodnějĆĄĂ­ pro rĆŻznĂ© typy\n"
+"konfiguracĂ­.\n"
+"\n"
+" * \"pdq\" - coĆŸ znamenĂĄ 'print, don't queue' a je vhodnĂœ tehdy, pokud "
+"nemĂĄte\n"
+"ĆŸĂĄdnĂ© sĂ­Ć„ovĂ© tiskĂĄrny. ZvlĂĄdĂĄ pouze několik moĆŸnostĂ­ a tisk na něj ze sĂ­tě\n"
+"je velmi pomalĂœ. Pokud s GNU/Linuxem teprve začínĂĄte, pak je \"pdq\"\n"
+"doporučenĂœ tiskovĂœ systĂ©m pro vĂĄs.\n"
+"\n"
+" * \"%s\"'Common Unix Printing System' je vynikajĂ­cĂ­ v tisku na lokĂĄlnĂ­\n"
+"tiskĂĄrny stejně jako pƙi tisku na tiskĂĄrnu na druhĂ© straně planety. "
+"NastavenĂ­\n"
+"je jednoduchĂ© a mĆŻĆŸe fungovat jako klient i server pro klienty z \"lpd\"\n"
+"systĂ©mu, takĆŸe je s nimi kompatibilnĂ­. Je moĆŸnĂ© nastavit spoustu voleb,\n"
+"ale zĂĄkladnĂ­ nastavenĂ­ je velmi jednoduchĂ©. Pokud potƙebujete emulovat\n"
+"\"lpd\" server, stačí spustit dĂ©mona \"cups-lpd\". MĂĄ takĂ© grafickĂ© "
+"prostƙedí\n"
+"pro tisk a nastavenĂ­ tiskĂĄrny.\n"
+"\n"
+"Pokud nynĂ­ provedete volbu a později budete chtĂ­t tiskovĂœ systĂ©m změnit,\n"
+"mĆŻĆŸete to provĂ©st pomocĂ­ nĂĄstroje PrinterDrake z ovlĂĄdacĂ­ho centra Mandrake "
+"tak,\n"
+"ĆŸe klepnete na tlačítko Expert."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Printer Server"
-msgstr "TiskovĂœ server"
+msgid "\"Menu\" key"
+msgstr "KlĂĄvesa \"Menu\""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
msgstr ""
-"Abyste mohli tisknout na NetWare tiskárně, musíte zadat název NetWare "
-"serveru (Pozor! To mĆŻĆŸe bĂœt odliĆĄnĂ© od jeho nĂĄzvu pro TCP/IP!), nĂĄzev "
-"tiskovĂ© fronty tiskĂĄrny, kterou chcete pouĆŸĂ­vat, uĆŸivatelskĂ© jmĂ©no a heslo."
+"\n"
+"\n"
+"Zkontrolujte prosĂ­m, zda PrinterDrake provedl automatickou detekci modelu "
+"sprĂĄvně. Pokud je vyznačen nesprĂĄvnĂœ model, mĆŻĆŸete ho změnit vĂœběrem ze "
+"seznamu nebo zvolte \"PƙímĂœ tisk\"."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "NetWare Printer Options"
-msgstr "MoĆŸnosti NetWare tiskĂĄrny"
+msgid "Security Administrator:"
+msgstr "Správce bezpečnosti:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please enter your login"
+msgstr "Zadejte svĂ© pƙihlaĆĄovacĂ­ jmĂ©no"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check permissions of files in the users' home."
+msgstr ""
+"pokud je nastaveno, kontrolu prĂĄva souborĆŻ v domovskĂ©m adresáƙi uĆŸivatele"
+
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
msgstr ""
-"Pƙipojit tiskárnu k Linux serveru a nechat počítač(e) s Windows pracovat "
-"jako klienty.\n"
-"\n"
-"Chcete opravdu pokračovat v nastavení tiskárny tímto zpƯsobem?"
+"NemĂĄte ĆŸĂĄdnĂ© pƙipojenĂ­ k Internetu.\n"
+"Vytvoƙte si jej klepnutím na 'Konfigurovat'"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Fonts copy"
+msgstr "Kopie fontu"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Automated"
+msgstr "Automaticky"
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Do you want to test the configuration?"
+msgstr "Chcete si vyzkouĆĄet nastavenĂ­?"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
msgstr ""
-"Nastavit na serveru s Windows tiskárnu, která bude pƙístupná pomocí IPP "
-"protokolu a nastavit tisk z tohoto počítače pomocí spojení \"%s\" v aplikaci "
-"PrinterDrake.\n"
-"\n"
+"TiskĂĄrna \"%s\" byla Ășspěơně odebrĂĄna z aplikace Star Office/OpenOffice.org/"
+"GIMP."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+" to the Internet as a client.\n"
"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
+"High: There are already some restrictions, and more automatic checks "
+"are run every night.\n"
"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
+"Higher: The security is now high enough to use the system as a server "
+"which can accept\n"
+" connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+" should choose a lower level.\n"
"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
+"Paranoid: This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+" features are at their maximum\n"
"\n"
+"Security Administrator:\n"
+" If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+" email)"
msgstr ""
-"ProvĂĄdĂ­te nastavenĂ­ tisku s Ășčtem na systĂ©mu Windows. DĂ­ky chybě v klientu "
-"protokolu Samba je heslo pƙi tisku poslĂĄno jako čistĂœ text z pƙíkazovĂ© "
-"ƙádky. Je tudĂ­ĆŸ moĆŸnĂ©, aby kdokoliv viděl toto heslo na obrazovce kdyĆŸ si "
-"zadá pƙíkaz napƙ. \"ps auxwww\".\n"
+"StandardnĂ­: BÄ›ĆŸnĂ© zabezpečenĂ­ doporučenĂ© pro počítač, kterĂœ bude pƙipojen k "
+"sĂ­ti\n"
+" Internet jako klient.\n"
"\n"
-"Doporučujeme pouĆŸĂ­vat jednu z nĂĄsledujĂ­cĂ­ch alternativ (ve vĆĄech pƙípadech "
-"je dobrĂ© mĂ­t nastaven pƙístup pouze z počítačƯ z lokĂĄlnĂ­ sĂ­tě, respektive za "
-"firewallem):\n"
+"VysokĂĄ: Jsou jiĆŸ zavedena některĂĄ omezenĂ­ a kaĆŸdou noc je spuĆĄtěno "
+"několik automatickĂœch kontrol.\n"
"\n"
-"PouĆŸĂ­t Ășčet, kterĂœ nemĂĄ nastaven ĆŸĂĄdnĂ© heslo, jako je \"GUEST\" nebo "
-"speciĂĄlnĂ­ Ășčet pouze pro Ășčely tisku. Neodstraƈujte ochranu heslem z bÄ›ĆŸnĂ©ho "
-"Ășčtu nebo dokonce z administrĂĄtorskĂ©ho Ășčtu.\n"
+"VyĆĄĆĄĂ­: Úroveƈ zabezpečenĂ­ je nynĂ­ dostatečně vysokĂĄ, aby bylo moĆŸnĂ© "
+"pouĆŸĂ­t\n"
+" systĂ©m jako server, kterĂœ pƙijĂ­mĂĄ poĆŸadavky od mnoha klientĆŻ. "
+"Pokud je vĂĄĆĄ\n"
+"\t počítač pƙipojen k Internetu jen jako klient, měli byste zvolit "
+"niĆŸĆĄĂ­ Ășroveƈ.\n"
"\n"
-"Nastavte tiskĂĄrnu na Windows serveru tak, aby fungovala pod LPD protokolem. "
-"Potom nastavte tisk na tĂ©to tiskĂĄrně pomocĂ­ typy spojenĂ­ \"%s\" v aplikaci "
-"PrinterDrake.\n"
+"ParanoidnĂ­: PodobnĂĄ pƙedchozĂ­ Ășrovni, ale systĂ©m je zcela uzavƙen a Ășroveƈ "
+"zabezpečení\n"
+" je na svém maximu.\n"
"\n"
+"Správce bezpečnosti:\n"
+" Pokud je zapnuta volba 'Bezpečnostní varování', budou "
+"bezpečnostnĂ­ varovĂĄnĂ­ zasĂ­lĂĄna tomuto uĆŸivateli (uĆŸivatelskĂ© jmĂ©no nebo\n"
+"\t email)"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "SECURITY WARNING!"
-msgstr "BEZPEČNOSTNÍ VAROVÁNÍ!"
+msgid "Save packages selection"
+msgstr "UloĆŸit vĂœběr jednotlivĂœch balíčkĆŻ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Samba share name missing!"
-msgstr "Chybí název pro sdílení pƙes Sambu!"
+msgid "Remove the last item"
+msgstr "Odstranit poslednĂ­ poloĆŸku"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "MusĂ­ bĂœt zadĂĄn buď nĂĄzev serveru nebo jeho IP adresa!"
+msgid "User list to restore (only the most recent date per user is important)"
+msgstr ""
+"Seznam uĆŸivatelĆŻ pro obnovenĂ­ (od kaĆŸdĂ©ho bude obnovena pouze poslednĂ­ "
+"zĂĄloha)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detected"
-msgstr "Automaticky nalezeno"
+msgid "No net boot images created!"
+msgstr "Nepodaƙilo se vytvoƙit obraz pro spouơtění ze sítě!"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Workgroup"
-msgstr "PracovnĂ­ skupina"
+msgid "use pptp"
+msgstr "pouĆŸĂ­t pptp"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Share name"
-msgstr "Sdílené jméno"
+msgid "Choose which services should be automatically started at boot time"
+msgstr "Zvolte si, kterĂ© sluĆŸby by měli bĂœt automaticky spuĆĄtěny pƙi startu"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SMB server IP"
-msgstr "IP adresa SMB serveru"
+msgid "Learn how to use this printer"
+msgstr "NĂĄpověda pro tisk na tĂ©to tiskĂĄrně"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SMB server host"
-msgstr "NĂĄzev SMB serveru"
+msgid "Configure the network now"
+msgstr "Nastavit sĂ­Ć„ nynĂ­"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
-" Pokud byla poĆŸadovanĂĄ tiskĂĄrna automaticky nalezena, vyberte ji jednoduĆĄe "
-"ze seznamu a pokud je to potƙeba, doplƈte uĆŸivatelskĂ© jmĂ©no, heslo, a "
-"pracovnĂ­ skupinu."
+msgid "Choose a mirror from which to get the packages"
+msgstr "Zvolte si zrcadlo (mirror) pro stahování balíčkƯ"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
msgstr ""
-"Abyste mohli tisknout na SMB tiskárně, musíte zadat název SMB počítače"
-"(Pozor! To mĆŻĆŸe bĂœt odliĆĄnĂ© od jeho TCP/IP nĂĄzvu) a moĆŸnĂĄ i IP adresu "
-"tiskovĂ©ho serveru, nĂĄzev sdĂ­lenĂ© tiskĂĄrny, vhodnĂ© uĆŸivatelskĂ© jmĂ©no, heslo a "
-"informace o pracovní skupině."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "MoĆŸnosti SMB (Windows 9x/NT) tiskĂĄrny"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "TiskĂĄrna \"%s\" na serveru \"%s\""
+"Změnu velikost FAT nenĂ­ moĆŸnĂ© provĂ©st, \n"
+"vyskytla se nĂĄsledujĂ­cĂ­ chyba: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", tiskĂĄrna \"%s\" na serveru \"%s\""
+msgid "Which sector do you want to move it to?"
+msgstr "Na kterĂœ sektor chcete oddĂ­l pƙesunout?"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Remote printer name missing!"
-msgstr "Chybí nåzev vzdålené tiskårny!"
+msgid "Do you want to click on this button?"
+msgstr "Chcete klepnout na toto tlačítko? "
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remote host name missing!"
-msgstr "ChybĂ­ nĂĄzev vzdĂĄlenĂ©ho počítače!"
+msgid "Bahamas"
+msgstr "Bahamy"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote printer name"
-msgstr "Nåzev vzdålené tiskårny"
+msgid "Manual configuration"
+msgstr "Ruční nastavení"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Remote host name"
-msgstr "NĂĄzev vzdĂĄlenĂ©ho počítače"
+msgid "search"
+msgstr "vyhledat"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
msgstr ""
-"Abyste mohli pouĆŸĂ­vat vzdĂĄlenou tiskovou frontu lpd, musĂ­te zadat nĂĄzev "
-"tiskovĂ©ho serveru a nĂĄzev tiskĂĄrny, kam mĂĄ bĂœt posĂ­lĂĄn tisk."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "MoĆŸnosti vzdĂĄlenĂ© lpd tiskĂĄrny"
+"Tento balíček nahraje zvolenou mapu klávesnice definovanou\n"
+"v /etc/sysconfig/keyboard. Tu lze vybrat pomocĂ­ nĂĄstroje kbdconfig.\n"
+"Pro větơinu počítačƯ byste ji měli nechat zapnutou."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Manual configuration"
-msgstr "Ruční nastavení"
+msgid "Xpmac (installation display driver)"
+msgstr "Xpmac (instalační ovladač pro obrazovku)"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Musíte vybrat/zadat tiskárnu/zaƙízení!"
+msgid "Zeroconf host name must not contain a ."
+msgstr "NĂĄzev počítače pro Zeroconf nemĆŻĆŸe obsahovat \"tečku\""
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
msgstr ""
-" (ParalelnĂ­ porty: /dev/lp0, /dev/lp1,... je ekvivalentnĂ­ LPT1:, LPT2:, ...,"
-"prvnĂ­ USB tiskĂĄrna: /dev/usb/lp0, druhĂĄ USB tiskĂĄrna: /dev/usb/lp1,...)."
+"Syslog je program pomocĂ­ něhoĆŸ zaznamenĂĄvĂĄ mnoho dĂ©monĆŻ sprĂĄvy do "
+"systĂ©movĂœch\n"
+"log souborĆŻ. Je dobrĂ© mĂ­t spuĆĄtěnĂœ syslog."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Vyberte port, ke kterĂ©mu je vaĆĄe tiskĂĄrna pƙipojena."
+msgid "Unknown/Others"
+msgstr "NeznĂĄmĂœ/JinĂœ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Vyberte si port, ke kterĂ©mu je tiskĂĄrna pƙipojena nebo zadejte do políčka "
-"název zaƙízení/název souboru"
+msgid "No TV Card detected!"
+msgstr "Nebyla nalezena TV karta!"
+
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Options"
+msgstr "Volby"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Vyberte tiskovĂœ port, kam budou směrovĂĄny tiskovĂ© Ășlohy."
+msgid "The printer \"%s\" is set as the default printer now."
+msgstr "TiskĂĄrna \"%s\" je nynĂ­ nastavena jako vĂœchozĂ­."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
msgstr ""
-"Vyberte si tiskárnu, kterou chcete nastavit. Konfigurace těchto tiskáren je "
-"plně automatická. Pokud nebyla tiskárna správně detekována nebo preferujete "
-"vlastní nastavení tisku, zvolte \"Ruční konfigurace\"."
+"NynĂ­ nastavujete laserovou tiskĂĄrnu OKI winprinter. Tyto tiskĂĄrny pouĆŸĂ­vajĂ­ "
+"velmi specifickĂœ komunikačnĂ­ protokol a mohou pracovat pouze pokud jsou "
+"pƙipojeny k prvnĂ­mu paralelnĂ­mu portu. Pokud je tiskĂĄrna pƙipojena na jinĂœ "
+"port, nebo se tiskne pƙes server, pƙipojte tiskárnu na první paralelní port. "
+"Jinak tisk nebude pracovat. Typ pƙipojení bude ovladač ignorovat."
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr "Zde je seznam automaticky detekovanĂœch tiskĂĄren. "
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgstr "Generace cpu (napƙ. 8 pro Pentium III, ...)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr "NynĂ­ nenĂ­ povolena ĆŸĂĄdnĂĄ alternativa"
+msgid "Auto-detected"
+msgstr "Automaticky nalezeno"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-"Konfigurace tĂ©to tiskĂĄrny je plně automatickĂĄ. Pokud nebyla tiskĂĄrna sprĂĄvně "
-"detekována nebo preferujete vlastní nastavení tisku, zvolte \"Ruční "
-"konfigurace\"."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "The following printer was auto-detected. "
-msgstr "Byla automaticky detekovĂĄna nĂĄsledujĂ­cĂ­ tiskĂĄrna. "
+"VĂĄĆĄ počítač bude nastaven jako instalačnĂ­ PXE server se sluĆŸbou DHCP\n"
+"a TFTP serveru.\n"
+"Tato vlastnost umoĆŸĆˆuje instalovat dalĆĄĂ­ počítače na lokĂĄlnĂ­ sĂ­ti pomocĂ­\n"
+"počítače.\n"
+"\n"
+"Pƙed pokračovĂĄnĂ­m se ujistěte, ĆŸe jste nastavili vaĆĄi sĂ­Ć„ a pƙipojenĂ­ k "
+"Internetu pomocĂ­ aplikace drakconnect.\n"
+"\n"
+"Pozn.: Pro nastavenĂ­ lokĂĄlnĂ­ sĂ­tě (LAN) potƙebujete vyhrazenĂœ sĂ­Ć„ovĂœ adaptĂ©r."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
-"Vyberte si tiskĂĄrnu, na kterou budou směrovĂĄny tiskovĂ© Ășlohy nebo zadejte do "
-"políčka název zaƙízení/název souboru"
+"Pro bootstrap nenĂ­ potƙebnĂ© mĂ­sto o velikosti 1MB! Instalace mĆŻĆŸe pokračovat "
+"ale pro spuĆĄtěnĂ­ systĂ©mu musĂ­te vytvoƙit bootstrap oddĂ­l pomocĂ­ DiskDrake"
#: ../../printer/printerdrake.pm:1
#, c-format
@@ -12184,1080 +12152,784 @@ msgstr ""
"Vyberte si tiskárnu, kterou chcete nastavit nebo zadejte do políčka název "
"zaƙízení/název souboru"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr "Jako alternativu mĆŻĆŸete zadat do políčka nĂĄzev zaƙízenĂ­/nĂĄzev souboru"
+msgid "Refuse"
+msgstr "OdmĂ­tnout"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "HFS"
+msgstr "HFS"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
msgstr ""
-"Pokud nenĂ­ mezi nimi poĆŸadovanĂĄ tiskĂĄrna, zadejte do políčka nĂĄzev zaƙízenĂ­/"
-"nĂĄzev souboru"
+"HardDrake testuje hardware a umoĆŸĆˆuje novĂœ/změněnĂœ\n"
+"hardware nastavit"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, c-format
-msgid "Available printers"
-msgstr "Dostupné tiskårny"
+msgid "Remote Printers"
+msgstr "Vzdålené tiskårny"
-#: ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "No printer found!"
-msgstr "Nenalezena ĆŸĂĄdnĂĄ tiskĂĄrna!"
+msgid "Creating and formatting file %s"
+msgstr "Vytváƙím a formátuji soubor %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "You must enter a device or file name!"
-msgstr "Musíte zadat zaƙízení nebo název souboru!"
+msgid "if set to yes, check additions/removals of sgid files."
+msgstr "pokud je nastaveno, provĂĄdĂ­ se kontrola pƙidanĂ©/odebranĂ© sgid soubory."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
-"Lokální tiskárna nenalezena! Pro ruční instalaci tiskárny zadejte název "
-"zaƙízení/souboru do políčka (Paralelní porty: /dev/lp0, /dev/lp1,... jsou "
-"ekvivalentnĂ­ LPT1:, LPT2:, ...,prvnĂ­ USB tiskĂĄrna: /dev/usb/lp0, druhĂĄ USB "
-"tiskĂĄrna: /dev/usb/lp1,...)."
+"Tiskárna HP LaserJet 1000 potƙebuje po spuơtění nahrát firmware. Stáhněte si "
+"z webovĂœch strĂĄnek HP ovladače pro Windows (firmware na dodĂĄvanĂ©m CD s "
+"tiskĂĄrnou nefunguje) a vyextrahujte z nich pomocĂ­ programu 'unzip' soubor "
+"'sihp1000.img'. Tento soubor nakopírujte do adresáƙe '/etc/printer'. Skript "
+"pro automatickĂœ upload potom tento soubor automaticky nahraje do tiskĂĄrny "
+"kdykoliv bude pƙipojena a zapnuta.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Local Printer"
-msgstr "MĂ­stnĂ­ tiskĂĄrna"
+msgid "Choose an existing LVM to add to"
+msgstr "Zvolte existující LVM pro pƙidání"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "USB printer \\#%s"
-msgstr "USB tiskĂĄrna \\#%s"
+msgid "xfs restart"
+msgstr "restart xfs"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "TiskĂĄrna na paralelnĂ­m portu \\#%s"
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
+"TiskĂĄrna s nĂĄzvem %s jiĆŸ existuje,\n"
+"chcete opravdu pƙepsat její konfiguraci?"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "TiskĂĄrna \"%s\" na SMB/Windows serveru \"%s\""
+msgid "No partition available"
+msgstr "Nejsou dostupnĂ© ĆŸĂĄdnĂ© diskovĂ© oddĂ­ly"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "SĂ­Ć„ovĂĄ tiskĂĄrna \"%s\", port %s"
+msgid "Use the scanners on hosts: "
+msgstr "PouĆŸĂ­t skenery na počítači: "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Detected %s"
-msgstr "Nalezeno %s"
+msgid "Unselected All"
+msgstr "ZruĆĄit celĂœ vĂœběr"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ", tiskĂĄrna \"%s\" na SMB/Windows serveru \"%s\""
+msgid "Domain Name Resolver"
+msgstr "Dekodér nåzvu domény"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", sĂ­Ć„ovĂĄ tiskĂĄrna \"%s\", port %s"
+msgid "Encryption key (again)"
+msgstr "Ơifrovací klíč (znovu)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Blahopƙejeme, tiskárna je instalována a nastavena!\n"
-"\n"
-"Tisknout z aplikací lze pƙíkazem \"Tisk\" (obyčejně v menu \"Soubor\").\n"
-"\n"
-"Pokud chcete pƙidat, odebrat, pƙejmenovat tiskĂĄrnu nebo změnit jejĂ­ vĂœchozĂ­ "
-"hodnoty (typ zĂĄsobnĂ­ku, kvalita tisku,...), zvolte \"TiskĂĄrna\" v sekci "
-"\"Hardware\" v ovlĂĄdacĂ­m centru Mandrake."
+msgid "Samba share name missing!"
+msgstr "Chybí název pro sdílení pƙes Sambu!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr "Automaticky nalĂ©zt tiskĂĄrny sdĂ­lenĂ© počítači s Microsoft Windows"
+msgid "True Type install done"
+msgstr "Instalace True Type fontƯ je dokončena"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr "Automaticky nalĂ©zt tiskĂĄrny pƙipojenĂ© pƙímo k lokĂĄlnĂ­ sĂ­ti"
+msgid "Detection in progress"
+msgstr "ProbĂ­hĂĄ detekce"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Automaticky nalĂ©zt tiskĂĄrny pƙipojenĂ© k tomuto počítači"
+msgid "Build Whole Kernel -->"
+msgstr "Sestavit celé jådro -->"
+
+#: ../../install_steps.pm:1
+#, c-format
+msgid "Welcome to %s"
+msgstr "VĂ­tĂĄ vĂĄs %s"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "VloĆŸte prosĂ­m disketu s moduly do %s"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Bootsplash"
+msgstr "Bootsplash"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"The following printer\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"%s%s\n"
+"is directly connected to your system"
msgstr ""
+"NĂĄsledujĂ­cĂ­ tiskĂĄrna\n"
"\n"
-"VĂ­tejte v PrĆŻvodci nastavenĂ­m tiskĂĄrny\n"
-"\n"
-"Tento prĆŻvodce vĂĄm pomĆŻĆŸe nainstalovat vaĆĄi tiskĂĄrnu nebo tiskĂĄrny pƙipojenĂ© "
-"k tomuto počítači.\n"
-"\n"
-"Pokud mĂĄte tiskĂĄrnu nebo tiskĂĄrny pƙipojenĂ© k tomuto počítači, zapojte je "
-"prosĂ­m a zapněte je; pak mohou bĂœt automaticky nalezeny. \n"
-"\n"
-"Pokud jste pƙipraveni, klepněte na tlačítko \"Dále\", nebo klepněte na "
-"tlačítko \"Zruơit\" pokud nechcete v tuto chvíli tiskárnu(y) nastavovat."
+"%s %s\n"
+"je pƙímo pƙipojena k vaơemu počítači"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"VĂ­tejte v PrĆŻvodci nastavenĂ­m tiskĂĄrny\n"
-"\n"
-"Tento prĆŻvodce vĂĄm pomĆŻĆŸe nainstalovat vaĆĄi tiskĂĄrnu nebo tiskĂĄrny pƙipojenĂ© "
-"k tomuto počítači nebo pƙímo k síti.\n"
-"\n"
-"Pokud mĂĄte tiskĂĄrnu nebo tiskĂĄrny pƙipojenĂ© k tomuto počítači, zapojte je "
-"prosĂ­m a zapněte je; pak mohou bĂœt automaticky nalezeny. VaĆĄe sĂ­Ć„ovĂ© "
-"tiskĂĄrny musĂ­ bĂœt rovnÄ›ĆŸ zapnuty a pƙipojenĂ© k sĂ­ti, majĂ­-li bĂœt automaticky "
-"nalezeny.\n"
-"\n"
-"AutomatickĂĄ detekce tiskĂĄren pƙipojenĂœch k sĂ­ti probĂ­hĂĄ podstatně dĂ©le neĆŸ "
-"automatickĂĄ detekce tiskĂĄren pouze lokĂĄlně pƙipojenĂœch k tomuto počítači. "
-"Pokud nepotƙebujete automatickou detekci tiskáren na síti, pak tuto "
-"autodetekci vypněte.\n"
-"\n"
-"Pokud jste pƙipraveni, klepněte na tlačítko \"Dále\", nebo klepněte na "
-"tlačítko \"Zruơit\" pokud nechcete v tuto chvíli tiskárny nastavovat."
+msgid "Printer sharing on hosts/networks: "
+msgstr "TiskĂĄrny sdĂ­lenĂ© na počítačích/sĂ­ti: "
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
"\n"
-"VĂ­tejte v PrĆŻvodci nastavenĂ­m tiskĂĄrny\n"
-"\n"
-"Tento prĆŻvodce vĂĄm pomĆŻĆŸe nainstalovat vaĆĄi tiskĂĄrnu nebo tiskĂĄrny pƙipojenĂ© "
-"k tomuto počítači, pƙímo k sĂ­ti, nebo sdĂ­lenĂ© na počítači s Windows.\n"
-"\n"
-"Pokud mĂĄte tiskĂĄrnu nebo tiskĂĄrny pƙipojenĂ© k tomuto počítači, zapojte je "
-"prosĂ­m a zapněte je; pak mohou bĂœt automaticky nalezeny. VaĆĄe sĂ­Ć„ovĂ© "
-"tiskĂĄrny nebo tiskĂĄrny sdĂ­lenĂ© počítači s Windows musĂ­ bĂœt rovnÄ›ĆŸ zapnuty a "
-"pƙipojenĂ© k sĂ­ti, majĂ­-li bĂœt automaticky nalezeny.\n"
-"\n"
-"AutomatickĂĄ detekce tiskĂĄren pƙipojenĂœch k sĂ­ti probĂ­hĂĄ podstatně dĂ©le neĆŸ "
-"automatickĂĄ detekce tiskĂĄren pouze lokĂĄlně pƙipojenĂœch k tomuto počítači. "
-"Pokud nepotƙebujete automatickou detekci tiskáren na síti, nebo tiskáren "
-"sdĂ­lenĂœch počítači s Windows, pak tuto autodetekci vypněte.\n"
-"\n"
-"Pokud jste pƙipraveni, klepněte na tlačítko \"Dále\", nebo klepněte na "
-"tlačítko \"Zruơit\" pokud nechcete v tuto chvíli tiskárny nastavovat."
+"Pƙíkaz \"%s\" dovoluje modifikovat volby pro kaĆŸdou tiskovou Ășlohu. "
+"JednoduĆĄe zadejte potƙebnĂ© nastavenĂ­ do pƙíkazovĂ© ƙádky, napƙ. \"%s<soubor>"
+"\". "
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
-"\n"
-"VĂ­tejte v prĆŻvodci nastavenĂ­m tisku\n"
-"\n"
-"Tento prĆŻvodce vĂĄm pomĆŻĆŸe nainstalovat lokĂĄlnĂ­ nebo vzdĂĄlenĂ© tiskĂĄrnu(y), "
-"kterĂ© je moĆŸnĂ© nĂĄsledně vyuĆŸĂ­t na vzdĂĄlenĂ©m počítači na sĂ­ti.\n"
-"\n"
-"Budete dotĂĄzĂĄni na vĆĄechny potƙebnĂ© informace pro nastavenĂ­ tiskĂĄrny, mĆŻĆŸete "
-"si vybrat se vĆĄech tiskovĂœch ovladačƯ a typĆŻ pƙipojenĂ­ tiskĂĄrny."
+"V některĂœch pƙípadech potƙebuje ovladač %s pro svoji sprĂĄvnou funkci dalĆĄĂ­\n"
+"informace, pƙestoĆŸe normĂĄlně funguje i bez nich. Chtěli byste zadat\n"
+"nějakĂ© doplƈujĂ­cĂ­ moĆŸnosti, nebo raději nechĂĄte ovladač samostatně "
+"prozkoumat\n"
+"hardware vaĆĄeho počítače, aby zĂ­skal informace kterĂ© potƙebuje? ZkoumĂĄnĂ­\n"
+"hardware mĆŻĆŸe ve vĂœjimečnĂœch pƙípadech zpĆŻsobit zamrznutĂ­ počítače, ale "
+"nemělo\n"
+"by v ĆŸĂĄdnĂ©m pƙípadě zpĆŻsobit jinĂ© ĆĄkody."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Not the correct CD label. Disk is labelled %s."
+msgstr "CD nemĂĄ sprĂĄvnĂœ nĂĄzev. Je označeno %s."
+
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
"\n"
+"%s\n"
"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
+"Click on Configure to launch the setup wizard."
msgstr ""
+"Vítá vás prƯvodce nastavením sdílení pƙipojení k Internetu!\n"
"\n"
+"%s\n"
"\n"
-"PrinterDrake nemohl zjistit, jakĂœ model je vaĆĄe tiskĂĄrna %s. ProsĂ­m vyberte "
-"si odpovĂ­dajĂ­cĂ­ model ze seznamu."
+"Klepněte na Konfigurovat, pokud chcete spustit prƯvodce nastavením."
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid ")"
-msgstr ")"
+msgid "Cuba"
+msgstr "Kuba"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on "
-msgstr " na "
+msgid "Searching for new printers..."
+msgstr "Vyhledåvåm nové tiskårny..."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "("
-msgstr "("
+msgid "Belize"
+msgstr "Belize"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configuring printer ..."
-msgstr "Nastavuji tiskĂĄrnu ..."
+msgid " (multi-session)"
+msgstr " (multi-session)"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Searching for new printers..."
-msgstr "Vyhledåvåm nové tiskårny..."
+msgid "Kernel Boot Timeout"
+msgstr "Prodleva pƙi spuơtění"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"POZNÁMKA: V zĂĄvislosti na modelu tiskĂĄrny a tiskovĂ©m systĂ©mu je potƙeba "
-"nainstalovat dalĆĄĂ­ch %d MB potƙebnĂ©ho software."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr "Opravdu chcete nastavit tisk na tomto počítači?\n"
+"VaĆĄe karta podporuje 3D akceleraci, ale pouze s XFree %s.\n"
+"Pokud pouĆŸijete XFree %s, mĆŻĆŸete na druhou stranu dosĂĄhnout lepĆĄĂ­ch vĂœsledkĆŻ "
+"ve 2D."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Chcete povolit tisk na tiskĂĄrnĂĄch vypsanĂœch vĂœĆĄe?\n"
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "PrƯvodce DrakX naơel následující ƙeơení:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "Chcete povolit tisk na tiskĂĄrnĂĄch v lokĂĄlnĂ­ sĂ­ti?\n"
+msgid "Hungarian"
+msgstr "MaďarskĂ©"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
msgstr ""
-"Chcete povolit tisk na tiskĂĄrnĂĄch vypsanĂœch vĂœĆĄe nebo na tiskĂĄrnĂĄch v "
-"lokĂĄlnĂ­ sĂ­ti?\n"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr " (Zkontrolujte to, ĆŸe vĆĄechny tiskĂĄrny jsou pƙipojeny a zapnuty).\n"
+"Vyberte si svého poskytovatele internetu.\n"
+" Pokud nenĂ­ na seznamu, vyberte si JinĂœ"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr "Na vaĆĄem počítači nebyla nalezena ĆŸĂĄdnĂĄ pƙímo pƙipojenĂĄ tiskĂĄrna"
+msgid "Automatic time synchronization (using NTP)"
+msgstr "Automatická synchronizace času (pomocí NTP)"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-"\n"
-"NaĆĄel jsem %d neznĂĄmĂœch tiskĂĄren pƙímo pƙipojenĂœch k vaĆĄemu počítači"
+msgid "8 MB"
+msgstr "8 MB"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"Naơel jsem jednu neznámou tiskárnu pƙímo pƙipojenou k vaơemu počítači"
+msgid "LDAP Server"
+msgstr "LDAP server"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
msgstr ""
-"NĂĄsledujĂ­cĂ­ tiskĂĄrna\n"
-"\n"
-"%s %s\n"
-"je pƙímo pƙipojena k vaơemu počítači"
+"Podpora PCMCIA větĆĄinou znamenĂĄ podporu zaƙízenĂ­ jako sĂ­Ć„ovĂ© karty a\n"
+"modemy v laptopech. Nespustí se pokud ji pƙímo nenastavíte, ale není "
+"problém\n"
+"jĂ­ mĂ­t nainstalovanou i na počítačích, kterĂ© ji nepotƙebujĂ­."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"NĂĄsledujĂ­cĂ­ tiskĂĄrny\n"
-"\n"
-"%s %s\n"
-"jsou pƙímo pƙipojeny k vaơemu počítači"
+msgid "Choose your country"
+msgstr "VĂœběr si zemi"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The following printers\n"
"\n"
-"%s%s\n"
-"are directly connected to your system"
+"- System Files:\n"
msgstr ""
-"NĂĄsledujĂ­cĂ­ tiskĂĄrny\n"
"\n"
-"%s %s\n"
-"jsou pƙímo pƙipojeny k vaơemu počítači"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "and %d unknown printers"
-msgstr "a %d neznĂĄmĂœch tiskĂĄren"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "and one unknown printer"
-msgstr "a jedna neznĂĄmĂĄ tiskĂĄrna"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Checking your system..."
-msgstr "Zkoumám váơ počítač..."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Restarting CUPS..."
-msgstr "Restartuji CUPS..."
+"- Systémové soubory:\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr "Tento server je jiĆŸ na seznamu, nelze jej tedy opět pƙidat.\n"
+msgid "Standalone Tools"
+msgstr "Samostatné nåstroje"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr "Pƙíklady sprĂĄvnĂœch IP adres:\n"
+msgid "Where"
+msgstr "Kde"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "ZadanĂĄ IP adresa nenĂ­ sprĂĄvnĂĄ.\n"
+msgid "but not matching"
+msgstr "neshodnĂœch"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Server IP missing!"
-msgstr "ChybnĂĄ IP adresa serveru!"
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
+msgstr ""
+"Zde si pro vaĆĄi zvukovou (%s) kartu mĆŻĆŸete vybrat alternativnĂ­ ovladač (buď "
+"OSS nebo ALSA)"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr "Pokud nenĂ­ zadĂĄn ĆŸĂĄdnĂœ port, bude jako vĂœchozĂ­ pouĆŸit port 631."
+msgid "Configuring PCMCIA cards..."
+msgstr "Nastavuji PCMCIA karty..."
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr ""
-"Zadejte IP adresu a port počítače, ze kterĂ©ho budete chtĂ­t vyuĆŸĂ­vat tiskĂĄrny."
+msgid "kdesu missing"
+msgstr "chybĂ­ kdesu"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Pƙístup k tiskĂĄrnĂĄm na vzdĂĄlenĂ©m CUPS serveru"
+msgid "Encryption key"
+msgstr "Ơifrovací klíč"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Remove selected server"
-msgstr "Odstranit vybranĂœ server"
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Edit selected server"
-msgstr "Upravit vybranĂœ server"
+msgid "Christmas Island"
+msgstr "Vánoční ostrov"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add server"
-msgstr "Pƙidat server"
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr "Instalace zaváděcího programu neuspěla. Stala se tato chyba:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
-"Pƙidejte sem ty CUPS servery, ze kterĂœch budete chtĂ­t vyuĆŸĂ­vat tiskĂĄrny. Je "
-"to nutnĂ© pouze v pƙípadě, ĆŸe tyto servery neơíƙí informace informace o "
-"tiskĂĄrnĂĄch v lokĂĄlnĂ­ sĂ­ti."
+msgid "EIDE/SCSI channel"
+msgstr "KanĂĄl EIDE/SCSI"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "IP address of host/network:"
-msgstr "IP adresa počítače/sítě:"
+msgid "Set this printer as the default"
+msgstr "Nastavit tuto tiskĂĄrnu jako vĂœchozĂ­"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr "Tento počítač/sĂ­Ć„ je jiĆŸ na seznamu, nelze jej znova pƙidat.\n"
+msgid "partition %s"
+msgstr "diskovém oddílu %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr "ZadanĂĄ IP adresa pro počítač nebo sĂ­Ć„ nenĂ­ sprĂĄvnĂĄ.\n"
+msgid "Paranoid"
+msgstr "ParanoidnĂ­"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Host/network IP address missing."
-msgstr "Chybí IP adresa počítače/sítě."
+msgid "NIS"
+msgstr "NIS"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr "Vyberte sĂ­Ć„ nebo počítač, na kterĂ©m budou lokĂĄlnĂ­ tiskĂĄrny dostupnĂ©:"
+msgid "<-- Del User"
+msgstr "<-- Odebrat uĆŸivatele"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Sharing of local printers"
-msgstr "SdĂ­lenĂ­ lokĂĄlnĂ­ch tiskĂĄren"
+msgid "Location on the bus"
+msgstr "Umístění na sběrnici"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove selected host/network"
-msgstr "Odstranit vybranĂœ počítač/sĂ­Ć„"
+msgid "No printer found!"
+msgstr "Nenalezena ĆŸĂĄdnĂĄ tiskĂĄrna!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Edit selected host/network"
-msgstr "Upravit vybranĂœ počítač/sĂ­Ć„"
+msgid "the vendor name of the device"
+msgstr "jmĂ©no dodavatele zaƙízenĂ­"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Add host/network"
-msgstr "Pƙidat počítač/sĂ­Ć„"
+msgid "Erase entire disk"
+msgstr "Smazat celĂœ disk"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
-"Zde jsou počítače a sĂ­tě, na kterĂœch budou dostupnĂ© lokĂĄlnĂ­ tiskĂĄrna(y):"
+msgid " (Default)"
+msgstr " (VĂœchozĂ­)"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
msgstr ""
-"Pokud je tato volba zvolena, pak je pƙi kaĆŸdĂ©m startu CUPS dĂ©mona "
-"automaticky zajiĆĄtěno ĆŸe\n"
-"\n"
-"- pokud je nainstalován LPD/LPRng, nebude CUPS pƙepisovat /etc/printcap\n"
-"\n"
-"- pokud chybí soubor /etc/cups/cupsd.conf, tak bude vytvoƙen\n"
-"\n"
-"- pokud jsou rozesílány informace do sítě, nebudou obsahovat v názvu serveru "
-"\"localhost\".\n"
+"Argumenty: ()\n"
"\n"
-"Pokud některĂĄ volba zpĆŻsobuje problĂ©my, vypněte tuto volbu, ale potom si na "
-"tyto zmĂ­něnĂ© body musĂ­te dĂĄvat pozor."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "AutomatickĂĄ korekce nastavenĂ­ pro CUPS"
+"Pokud je SERVER_LEVEL (nebo SECURE_LEVEL chybĂ­) v souboru\n"
+"/etc/security/msec/security.conf větĆĄĂ­ neĆŸ 3, vytvoƙí je symbolickĂœ odkaz\n"
+"/etc/security/msec/server na /etc/security/msec/server.<SERVER_LEVEL>.\n"
+"/etc/security/msec/server je pouĆŸit programem chkconfig --add pro pƙidĂĄnĂ­\n"
+"sluĆŸby během instalace balíčkĆŻ."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-"Tato volba dovoluje tisk textovĂœch souborĆŻ v japonĆĄtině. PouĆŸijte tuto "
-"funkci pouze pokud opravdu potƙebujete tisknout v japonơtině, pokud je "
-"zvolena, nelze uĆŸ tisknout nĂĄrodnĂ­ znaky v latince a nelze nastavovat "
-"okraje, velikost fontĆŻ, atd. Toto nastavenĂ­ se tĂœkĂĄ pouze tiskĂĄren "
-"definovanĂœch na tomto počítači. Pokud chcete tisknout japonskĂ© texty na "
-"vzdĂĄlenĂ© tiskĂĄrně, musĂ­te tuto funkci aktivovat na vzdĂĄlenĂ©m počítači."
+msgid "Automatic reconfiguration"
+msgstr "AutomatickĂ© pƙenastavenĂ­"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Japanese text printing mode"
-msgstr "TiskovĂœ reĆŸim pro japonskĂœ text"
+msgid "Receiving Speed:"
+msgstr "Rychlost na pƙíjmu:"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
-"Pro zĂ­skĂĄnĂ­ pƙístupu na vzdĂĄlenĂ© CUPS servery v lokĂĄlnĂ­ sĂ­ti potƙebujete "
-"pouze povolit volbu \"Automaticky nalĂ©zt dostupnĂ© tiskĂĄrny na vzdĂĄlenĂœch "
-"počítačích\". CUPS server následně informuje o těchto tiskárnách. Vơechny "
-"znåmé tiskårny potom budou vypsåny v sekci \"Vzdålené tiskårny\" v hlavním "
-"okně aplikace PrinterDrake. Pokud CUPS server(y) nejsou ve vaơí lokální "
-"sĂ­ti, musĂ­te zadat IP adresu a volitelně takĂ© číslo portu, aby bylo moĆŸnĂ© "
-"uvedené informace ze serverƯ získat."
+msgid "Turks and Caicos Islands"
+msgstr "Turks a Caicos Islands"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "None"
-msgstr "ĆœĂĄdnĂ©"
+msgid "permissions"
+msgstr "oprávnění"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Additional CUPS servers: "
-msgstr "DalĆĄĂ­ CUPS servery: "
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
-#, c-format
-msgid "No remote machines"
-msgstr "Nejsou ĆŸĂĄdnĂ© vzdĂĄlenĂ© počítače"
+msgid "<- Previous"
+msgstr "<- Zpět"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Custom configuration"
-msgstr "VlastnĂ­ nastavenĂ­"
+msgid "Internet Connection Sharing configuration"
+msgstr "Nastavení sdílení pƙipojení k Internetu"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "TiskĂĄrny sdĂ­lenĂ© na počítačích/sĂ­ti: "
+msgid "Toggle between flat and group sorted"
+msgstr "PƙepnutĂ­ mezi abecednĂ­m a skupinovĂœm ƙazenĂ­m"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr "Automaticky nalĂ©zt dostupnĂ© tiskĂĄrny na vzdĂĄlenĂœch počítačích"
+msgid "Themes"
+msgstr "TĂ©mata"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr "TiskĂĄrny na tomto počítači jsou pƙístupnĂ© jinĂœm vzdĂĄlenĂœm počítačƯm"
+msgid "Options: %s"
+msgstr "Volby: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
-"MĆŻĆŸete se rozhodnout, zda vĆĄechny tiskĂĄrny na vzdĂĄlenĂœch počítačích budou "
-"dostupnĂ© i na tomto počítači"
+"Jako sprĂĄvce zavĂĄděnĂ­ nynĂ­ pouĆŸĂ­vĂĄte %s.\n"
+"Pokud chcete spustit prƯvodce nastavením, klepněte na Nastavit."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
-msgstr ""
-"Zde mĆŻĆŸete rozhodnout, zda tiskĂĄrny pƙipojenĂ© k tomuto počítači budou "
-"vzdĂĄleně pƙístupnĂ© a z kterĂœch vzdĂĄlenĂœch počítačƯ."
+msgid "OKI winprinter configuration"
+msgstr "NastavenĂ­ pro OKI win-tiskĂĄrnu"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "CUPS printer configuration"
-msgstr "Nastavení tiskáren pƙes CUPS"
+msgid "Saint Helena"
+msgstr "SvatĂĄ Helena"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
-msgstr "Autodetekce tiskĂĄrny (lokĂĄlnĂ­, TCP/soket, a tiskĂĄrny SMB)"
+msgid "Security Level"
+msgstr "Úroveƈ zabezpečení"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
+"Some steps are not completed.\n"
"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
msgstr ""
+"NěkterĂ© kroky nebyly dokončeny.\n"
"\n"
-"V pƙípadě vzdĂĄlenĂ©ho CUPS serveru nemusĂ­te nastavovat tiskĂĄrny zde,\n"
-"tiskĂĄrny budou automaticky detekovĂĄny."
+"Chcete opravdu nyní skončit?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "How is the printer connected?"
-msgstr "Jak je tiskárna pƙipojena?"
+msgid "Sudan"
+msgstr "SĂșdĂĄn"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Select Printer Connection"
-msgstr "Zvolte pƙipojení tiskárny"
+msgid "Polish (qwertz layout)"
+msgstr "PolskĂ© (rozloĆŸenĂ­ QWERTZ)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
-"Tiskárna HP LaserJet 1000 potƙebuje po spuơtění nahrát firmware. Stáhněte si "
-"z webovĂœch strĂĄnek HP ovladače pro Windows (firmware na dodĂĄvanĂ©m CD s "
-"tiskĂĄrnou nefunguje) a vyextrahujte z nich pomocĂ­ programu 'unzip' soubor "
-"'sihp1000.img'. Tento soubor nakopírujte do adresáƙe '/etc/printer'. Skript "
-"pro automatickĂœ upload potom tento soubor automaticky nahraje do tiskĂĄrny "
-"kdykoliv bude pƙipojena a zapnuta.\n"
+msgid "Syria"
+msgstr "SĂœrie"
-#: ../../security/help.pm:1
+# NOTE: this message will be displayed at boot time; that is
+# only the ascii charset will be available on most machines
+# so use only 7bit for this message (and do transliteration or
+# leave it in English, as it is the best for your language)
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
#, c-format
msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the user umask."
-msgstr ""
-"Argumenty: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
"\n"
-"Nastavte uĆŸivatelskou masku."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (val)\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
"\n"
-"Set the shell timeout. A value of zero means no timeout."
msgstr ""
-"Argumenty: (val)\n"
-"\n"
-"NastavĂ­ čas vyprĆĄenĂ­ pro shell. NulovĂĄ hodnota znamenĂĄ ĆŸĂĄdnĂœ čas."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (size)\n"
+"Vita Vas %s, program pro start operacniho systemu!\n"
"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-"Argumenty: (velikost)\n"
+"Vyberte si ze seznamu operacnich systemu nize nebo\n"
+"pockejte %d vterin pro automaticky start.\n"
"\n"
-"Nastaví velikost historie pro pƙíkazy. Hodnota -1 znamená neomezená."
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr "pokud je nastaveno, provĂĄdĂ­ se kontrola pƙidanĂ©/odebranĂ© sgid soubory."
+msgid "Portuguese"
+msgstr "Portugalské"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check open ports."
-msgstr "pokud je nastaveno, provĂĄdĂ­ se kontrola na otevƙenĂ© porty."
+msgid "Loopback file name: "
+msgstr "NĂĄzev souboru loopbacku:"
-#: ../../security/help.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
-"pokud je nastaveno, odesĂ­lĂĄ report na danĂœ email nebo pƙímo uĆŸivateli root"
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "Adresa serveru DNS by měla bĂœt ve tvaru 1.2.3.4"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr "pokud je nastaveno, odesĂ­lĂĄ vĂœsledek kontroly mailem."
+msgid "Serbia"
+msgstr "Srbsko"
-#: ../../security/help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
-"pokud je nastaveno, kontroluje, kterĂ© soubory/adresáƙe jsou zapisovatelnĂ© "
-"pro vĆĄechny."
+msgid "Newzealand"
+msgstr "NovĂœ ZĂ©land"
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr "pokud je nastaveno, posĂ­lĂĄ vĂœsledek kontroly na tty."
+msgid "This directory should remain within the root filesystem"
+msgstr "Tento adresáƙ musĂ­ kromě koƙenovĂ©ho souborovĂ©ho systĂ©mu zĆŻstat"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr "pokud je nastaveno, spouĆĄtĂ­ kontrolu rpm databĂĄze."
+msgid "CapsLock key"
+msgstr "KlĂĄvesa CapsLock"
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
-"pokud je nastaveno, kontroluje, zda je sĂ­Ć„ovĂ© rozhranĂ­ v promiskuitnĂ­m reĆŸimu"
+msgid "Install bootloader"
+msgstr "Zaváděcí program"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr "pokud je nastaveno, provĂĄdĂ­ kontrolu na chkrootkit."
+msgid "Select the memory size of your graphics card"
+msgstr "Kolik paměti je na vaĆĄĂ­ grafickĂ© kartě ?"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
-"pokud je nastaveno, kontrolu prĂĄva souborĆŻ v domovskĂ©m adresáƙi uĆŸivatele"
+"[VOLBY]\n"
+"SĂ­Ć„ & pƙipojenĂ­ k Internetu a monitorovĂĄnĂ­ aplikacĂ­\n"
+"\n"
+"--defaultintf interface: zobrazĂ­ vĆŸdy toto rozhranĂ­\n"
+"--connect : pokud není pƙipojeno, provede pƙipojení k internetu\n"
+"--disconnect : pokud je pƙipojeno, provede odpojení od internetu\n"
+"--force : pouĆŸĂ­vĂĄ se s (pƙi)odpojenĂ­m : vynutĂ­ (pƙi)odpojenĂ­.\n"
+"--status : vrátí 1 pokud je pƙipojeno, jinak vrací 0 a skončí.\n"
+"--quiet : tichĂœ reĆŸim. PouĆŸĂ­vĂĄ se pƙi (pƙi)odpojovĂĄnĂ­."
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr ""
-"pokud je nastaveno, kontroluje pƙidávání/odebírání souborƯ se suid root."
+msgid "Dynamic IP Address Pool:"
+msgstr "DynamickĂœ rozsah IP adres:"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr "pokud je nastaveno, posĂ­lĂĄ vĂœstup kontroly do syslogu."
+msgid "LVM name?"
+msgstr "NĂĄzev pro LVM?"
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
-msgstr ""
-"pokud je nastaveno, kontroluje heslo, zda není pråzdné heslo v /etc/shadow a "
-"uĆŸivatele, kteƙí majĂ­ id 0 jinĂ­ neĆŸ uĆŸivatel root."
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
+msgstr "Některá zaƙízení v tƙídě hardware \"%s\" byla odstraněna:\n"
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr "pokud je nastaveno, spouĆĄtĂ­ kaĆŸdĂœ den bezpečnostnĂ­ kontrolu."
+msgid "Found %s %s interfaces"
+msgstr "NaĆĄel jsem %s %s rozhranĂ­"
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr "pokud je nastaveno, ověƙuje kontrolní součet pro suid/sgid soubory."
+msgid "sticky-bit"
+msgstr "sticky-bit"
-#: ../../security/help.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr "pokud je nastaveno, kontroluje prĂĄzdnĂĄ hesla v /etc/shadow."
+msgid "Post Install"
+msgstr "Poinstalační nastavení"
-#: ../../security/help.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "if set to yes, report unowned files."
-msgstr "pokud je nastaveno, vypisuje soubory bez vlastnĂ­ka."
+msgid "The internal domain name"
+msgstr "Interní nåzev domény"
-#: ../../security/help.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the root umask."
-msgstr ""
-"Argumenty: (umask)\n"
-"\n"
-"Nastavuje umask pro uĆŸivatele root."
+msgid "Card IRQ"
+msgstr "IRQ karty"
#: ../../security/help.pm:1
#, c-format
msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
+"Arguments: (umask)\n"
"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+"Set the user umask."
msgstr ""
-"Argumenty: (délka, ndigits=0, nupper=0)\n"
+"Argumenty: (umask)\n"
"\n"
-"NastavĂ­ minimĂĄlnĂ­ dĂ©lku hesla, minimĂĄlnĂ­ počet číslic a velkĂœch pĂ­smen v "
-"hesle."
+"Nastavte uĆŸivatelskou masku."
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-"Nastavuje dĂ©lku historie pro pouĆŸitĂĄ hesla."
+msgid "logdrake"
+msgstr "logdrake"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
-"Argumenty: (max, inactive=-1)\n"
-"\n"
-"Nastaví dobu platnosti hesla na \\fImax\\fP dnƯ a prodlevu mezi změnami na "
-"\\fIinactive\\fP."
+"Import fontĆŻ a monitoring aplikacĂ­\n"
+"--windows_import : provede import ze vĆĄech dostupnĂœch oddĂ­lĆŻ s Windows.\n"
+"--xls_fonts : zobrazĂ­ vĆĄechny fonty, kterĂ© jiĆŸ z xls existujĂ­\n"
+"--strong : silnĂĄ verifikace fontĆŻ.\n"
+"--install : akceptuje libovolnĂœ font z libovolnĂ©ho adresáƙe.\n"
+"--uninstall : odinstaluje libovolnĂœ font nebo libovolnĂœ adresáƙ s "
+"fonty.\n"
+"--replace : nahradĂ­ jiĆŸ existujĂ­cĂ­ fonty\n"
+"--application : 0 ĆŸĂĄdnĂĄ aplikace.\n"
+" : 1 vƥechny dostupné podporované aplikace.\n"
+" : nazev_aplikace jako napƙ. so pro staroffice \n"
+" : a gs pro ghostscript."
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
-"Argumenty: (jméno)\n"
-"\n"
-"PƙidĂĄ jmĂ©no k vĂœjimkĂĄm, kterĂ© se nekontrolujĂ­ na dobu platnosti pomocĂ­ msec."
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-"PovolĂ­/ZakĂĄĆŸe sulogin(8) v jednouĆŸivatelskĂ©m reĆŸimu."
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "Zvolte mechaniku, kde chcete vytvoƙit startovací disketu"
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-" PovolĂ­/ZakĂĄĆŸe provĂĄděnĂ­ dennĂ­ch bezpečnostnĂ­ch kontrol."
+msgid "LILO with text menu"
+msgstr "LILO s textovou nabĂ­dkou"
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-" PovolĂ­/ZakĂĄĆŸe kontrolu na nastavenĂ­ promiskuitnĂ­ho reĆŸimu sĂ­Ć„ovĂ©ho rozhranĂ­."
+msgid "Everything (no firewall)"
+msgstr "VĆĄechno (bez firewallu)"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-"PouĆŸije heslo pro autentizaci uĆŸivatelĆŻ."
+msgid "You must specify a kernel image"
+msgstr "MusĂ­te zadat soubor s jĂĄdrem"
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-"Povoluje su pouze členĆŻm skupiny wheel nebo povoluje su kaĆŸdĂ©mu uĆŸivateli."
+msgid ", multi-function device on USB"
+msgstr ", multifunkční zaƙízení na USB"
-#: ../../security/help.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-" PovolĂ­/ZakĂĄĆŸe bezpečnostnĂ­ kontrolu pravidelně kaĆŸdou hodinu."
+msgid "Do"
+msgstr "Provést"
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-" PovolĂ­/ZakĂĄĆŸe zaznamenĂĄvĂĄnĂ­ podivnĂœch IPv4 paketĆŻ."
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "Stahuji ze zrcadla(mirror) seznam dostupnĂœch balíčkĆŻ"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-" PovolĂ­/ZakĂĄĆŸe pouĆŸitĂ­ knihovny libsafe, pokud je na systĂ©mu nalezena."
+msgid "Lithuanian AZERTY (old)"
+msgstr "Litevské AZERTY (starå)"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
-msgstr ""
-"Argumenty: (arg, alert=1)\n"
-"\n"
-"PovolĂ­/ZakĂĄĆŸe ochranu pƙed IP spoofing."
+msgid "Brazilian (ABNT-2)"
+msgstr "Brazilské (ABNT-2)"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
-msgstr ""
-"Argumenty: (arg, alert=1)\n"
-"\n"
-"PovolĂ­/ZakĂĄĆŸe ochranu pƙed spoofingem jmennĂœch sluĆŸeb. Pokud\n"
-"je \\fIalert\\fP nastaveno, vypĂ­ĆĄe report do syslogu."
+msgid "IP address of host/network:"
+msgstr "IP adresa počítače/sítě:"
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
-"Argumenty: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"PovolĂ­/zakĂĄĆŸe vĂœpis syslog hlĂĄĆĄek na konzoli 12. VĂœraz \\fIexpr\\fP\n"
-"určuje, co se bude logovat (více detailƯ najdete v nápovědě syslog.conf(5))\n"
-"a dev určuje na kterĂ© zaƙízenĂ­ se bude log posĂ­lat."
+"umístění y souƙadnice pro\n"
+"levĂœ hornĂ­ roh liĆĄty s prĆŻběhem"
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-"PovolĂ­/zakĂĄĆŸe pƙíkaz crontab a at pro uĆŸivatele. VyjmenovanĂ­ uĆŸivatelĂ© se\n"
-"zapĂ­ĆĄou do /etc/cron.allow a /etc/at.allow\n"
-"(vĂ­ce man at(1) a crontab(1))."
+msgid "System installation"
+msgstr "Instalace systému"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
-msgstr ""
-"Argumenty: ()\n"
-"\n"
-"Pokud je SERVER_LEVEL (nebo SECURE_LEVEL chybĂ­) v souboru\n"
-"/etc/security/msec/security.conf větĆĄĂ­ neĆŸ 3, vytvoƙí je symbolickĂœ odkaz\n"
-"/etc/security/msec/server na /etc/security/msec/server.<SERVER_LEVEL>.\n"
-"/etc/security/msec/server je pouĆŸit programem chkconfig --add pro pƙidĂĄnĂ­\n"
-"sluĆŸby během instalace balíčkĆŻ."
+msgid "Saint Vincent and the Grenadines"
+msgstr "Saint Vincent a Grenadiny"
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-"Autorizuje vĆĄechny sluĆŸby kontrolovanĂ© tcp_wrappers (vĂ­ce hosts.deny(5)) "
-"pokud je nastaveno \\fIarg\\fP = ALL. Autorizuje\n"
-"pouze lokĂĄlnĂ­, pokud je nastaveno \\fIarg\\fP = LOCAL a nic pokud je\n"
-"nastaveno \\fIarg\\fP = NONE. VĂ­ce najdete v man hosts.allow(5)."
+msgid "/File/_Open"
+msgstr "/Soubor/_Otevƙít"
#: ../../security/help.pm:1
#, c-format
@@ -13272,1081 +12944,761 @@ msgstr ""
"Argument udává, zda je klient oprávněn se pƙipojit k X serveru\n"
"na tcp port 6000 nebo ne."
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
-msgstr ""
-"Argumenty: (arg, listen_tcp=None)\n"
-"\n"
-"PovolĂ­/ZakĂĄĆŸe spojenĂ­ na X server. PrvnĂ­ argument udĂĄvĂĄ, co se provede\n"
-"na straně klienta. ALL (vơechna spojení jsou povolena), LOCAL (pouze "
-"lokĂĄlnĂ­\n"
-"spojenĂ­ je povoleno) a NONE (nenĂ­ povoleno ĆŸĂĄdnĂ© spojenĂ­)."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-"PovolĂ­/ZakĂĄĆŸe vĂœpis uĆŸivatelĆŻ ve sprĂĄvcĂ­ch pƙihlĂĄĆĄenĂ­ (kdm nebo gdm)."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-"PovolĂ­/ZakĂĄĆŸe pƙímĂ© pƙihlĂĄĆĄenĂ­ uĆŸivatele root."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-"PovolĂ­/ZakĂĄĆŸe vzdĂĄlenĂ© pƙihlĂĄĆĄenĂ­ uĆŸivatele root."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-"PovolĂ­/ZakĂĄĆŸe reboot s konsole provedenĂ© uĆŸivatelem."
-
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-"Pokud je nastaven \\fIarg\\fP = ALL je povolena existence soubor /etc/issue\n"
-"a /etc/issue.net. Pokud je nastaven \\fP = NONE nenĂ­ povolen ĆŸĂĄdnĂœ\n"
-"soubor /etc/issue."
+msgid "Location of auto_install.cfg file"
+msgstr "Umístění souboru auto_install.cfg"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-"PovolĂ­/ZakĂĄĆŸe automatickĂ© pƙihlĂĄĆĄenĂ­."
+msgid "Open Firmware Delay"
+msgstr "Prodleva pro firmware"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-"Akceptuje/OdmĂ­tne icmp echo."
+msgid "Hungary"
+msgstr "Maďarsko"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse broadcasted icmp echo."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-"Akceptuje/OdmĂ­tne vĆĄesměrovĂ© icmp echo."
+msgid "Total progess"
+msgstr "CelkovĂœ prĆŻběh"
-#: ../../security/help.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Accept/Refuse bogus IPv4 error messages."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-"Akceptuje/odmítne nekorektní chybové IPv4 zpråvy."
+msgid "Color configuration"
+msgstr "NastavenĂ­ barev"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "AdministrĂĄtor bezpečnosti (pƙihlaĆĄovacĂ­ jmĂ©no nebo email)"
+msgid "New Zealand"
+msgstr "NovĂœ ZĂ©land"
#: ../../security/level.pm:1
#, c-format
msgid ""
-"A library which defends against buffer overflow and format string attacks."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
msgstr ""
-"Knihovna, kterĂ© zabraƈuje ĂștokĆŻm proti pƙetečenĂ­ bufferu nebo proti ĆĄpatnĂ©mu "
-"formátování ƙetězcƯ."
-
-#: ../../security/level.pm:1
-#, c-format
-msgid "Use libsafe for servers"
-msgstr "PouĆŸĂ­t libsafe pro servery"
+"ExistujĂ­ zde některĂĄ omezenĂ­ a kaĆŸdou noc jsou spuĆĄtěny automatickĂ© testy."
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Security level"
-msgstr "Úroveƈ zabezpečení"
+msgid "please choose the date to restore"
+msgstr "Vyberte datum obnovenĂ­ zĂĄlohy"
-#: ../../security/level.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please choose the desired security level"
-msgstr "Vyberte prosĂ­m poĆŸadovanou Ășroveƈ zabezpečenĂ­"
+msgid "Switching from ext2 to ext3"
+msgstr "Pƙepínám z ext2 na ext3"
-#: ../../security/level.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "DrakSec Basic Options"
-msgstr "ZĂĄkladnĂ­ volby programu DrakSec"
+msgid "LPRng"
+msgstr "LprNG"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Tato Ășroveƈ mĂĄ vlastnosti pƙedchozĂ­ Ășrovně, ale systĂ©m je Ășplně uzavƙen.\n"
-"Zabezpečení je nastaveno na maximum."
+msgid "Netherlands Antilles"
+msgstr "Nizozemské Antily"
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"S touto bezpečnostnĂ­ ĂșrovnĂ­ je moĆŸnĂ© pouĆŸĂ­vat systĂ©m jako server.\n"
-"Bezpečnost je nynĂ­ dostatečně vysokĂĄ, aby bylo moĆŸnĂ© pouĆŸĂ­vat systĂ©m jako "
-"server, ke kterému\n"
-"je moĆŸnĂ© pƙipojit mnoho klientĆŻ. PoznĂĄmka: pokud je počítač pouĆŸĂ­vĂĄn pouze "
-"jako klient pro pƙipojenĂ­ k Internetu, je lepĆĄĂ­ zvolit niĆŸĆĄĂ­ Ășroveƈ."
+msgid "Browse to new restore repository."
+msgstr "ProchĂĄzet nově obnovenĂœ adresáƙ."
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
msgstr ""
-"ExistujĂ­ zde některĂĄ omezenĂ­ a kaĆŸdou noc jsou spuĆĄtěny automatickĂ© testy."
+"\n"
+"VĂ­tejte v prĆŻvodci nastavenĂ­m tisku\n"
+"\n"
+"Tento prĆŻvodce vĂĄm pomĆŻĆŸe nainstalovat lokĂĄlnĂ­ nebo vzdĂĄlenĂ© tiskĂĄrnu(y), "
+"kterĂ© je moĆŸnĂ© nĂĄsledně vyuĆŸĂ­t na vzdĂĄlenĂ©m počítači na sĂ­ti.\n"
+"\n"
+"Budete dotĂĄzĂĄni na vĆĄechny potƙebnĂ© informace pro nastavenĂ­ tiskĂĄrny, mĆŻĆŸete "
+"si vybrat se vĆĄech tiskovĂœch ovladačƯ a typĆŻ pƙipojenĂ­ tiskĂĄrny."
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Toto je standardnĂ­ Ășroveƈ zabezpečenĂ­ pro počítač, kterĂœ je pouĆŸĂ­vĂĄn jako "
-"klient pro pƙipojení k internetu."
+msgid "and %d unknown printers"
+msgstr "a %d neznĂĄmĂœch tiskĂĄren"
-#: ../../security/level.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
msgstr ""
-"Hesla jsou nynĂ­ aktivnĂ­, ale stĂĄle nedoporučuji pouĆŸĂ­t tento počítač na sĂ­ti."
+"PrvnĂ­ verze procesorĆŻ Pentium měly z vĂœroby chybu v jednotce pro plovoucĂ­ "
+"ƙádovou čárku, kterĂĄ nedosahovala poĆŸadovanĂ© pƙesnosti pƙi operaci FDIV"
-#: ../../security/level.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
+msgid "No ISDN PCI card found. Please select one on the next screen."
msgstr ""
-"Tato Ășroveƈ musĂ­ bĂœt pouĆŸita s rozmyslem. Sice mĆŻĆŸete snadněji pouĆŸĂ­vat "
-"svĆŻj\n"
-"systĂ©m, ale na druhou stranu je velmi citlivĂœ: NesmĂ­ bĂœt pouĆŸit pro\n"
-"počítač pƙipojenĂœ k Internetu. Pro pƙihlĂĄĆĄenĂ­ nenĂ­ zapotƙebĂ­ ĆŸĂĄdnĂ© heslo."
-
-#: ../../security/level.pm:1
-#, c-format
-msgid "Paranoid"
-msgstr "ParanoidnĂ­"
+"NenaĆĄel jsem ĆŸĂĄdnou ISDN PCI kartu. ProsĂ­m zvolte si jednu z nĂĄsledujĂ­cĂ­ "
+"nabĂ­dky"
-#: ../../security/level.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Higher"
-msgstr "VysokĂĄ"
+msgid "GB"
+msgstr "GB"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "High"
-msgstr "VyĆĄĆĄĂ­"
+msgid "Please give a user name"
+msgstr "ProsĂ­m zadejte uĆŸivatelskĂ© jmĂ©no"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Poor"
-msgstr "SlabĂĄ"
+msgid "Enable CD Boot?"
+msgstr "Povolit spuơtění z CD?"
-#: ../../security/level.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Welcome To Crackers"
-msgstr "Dveƙe dokoƙán"
+msgid " enter `void' for void entry"
+msgstr " zadejte `void` pokud chcete prĂĄzdnĂœ vstup"
-#: ../../standalone/XFdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Pro aktivaci změn se prosím znovu pƙihlaste na %s"
+msgid "on Hard Drive"
+msgstr "na pevnĂœ disk"
-#: ../../standalone/XFdrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Prosím odhlaste se a pak stiskněte Ctrl-Alt-Backspace"
+msgid "Winmodem connection"
+msgstr "Pƙipojení pƙes winmodem"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
-msgstr "/etc/hosts.allow a /etc/hosts.deny jsou jiĆŸ nastaveny - beze změn"
+msgid ""
+"\n"
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
+msgstr ""
+"\n"
+"Blahopƙejeme, tiskárna je instalována a nastavena!\n"
+"\n"
+"Tisknout z aplikací lze pƙíkazem \"Tisk\" (obyčejně v menu \"Soubor\").\n"
+"\n"
+"Pokud chcete pƙidat, odebrat, pƙejmenovat tiskĂĄrnu nebo změnit jejĂ­ vĂœchozĂ­ "
+"hodnoty (typ zĂĄsobnĂ­ku, kvalita tisku,...), zvolte \"TiskĂĄrna\" v sekci "
+"\"Hardware\" v ovlĂĄdacĂ­m centru Mandrake."
-#: ../../standalone/drakTermServ:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "Je nutnĂ© nejprve vytvoƙit soubor /etc/dhcpd.conf!"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Set the password history length to prevent password reuse."
+msgstr ""
+"Argumenty: (arg)\n"
+"\n"
+"Nastavuje dĂ©lku historie pro pouĆŸitĂĄ hesla."
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "Něco neproběhlo sprĂĄvně! - Je nainstalovanĂœ program mkisofs?"
+msgid "Now, you can run xawtv (under X Window!) !\n"
+msgstr "NynĂ­ mĆŻĆŸete spustit aplikaci XawTV (pod X Windows!)\n"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr "ISO image pro Etherboot je %s"
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr "NenĂ­ dostatek odklĂĄdacĂ­ho prostoru k instalaci, prosĂ­m pƙidejte nějakĂœ"
-#: ../../standalone/drakTermServ:1
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No floppy drive available!"
-msgstr "NenĂ­ dostupnĂĄ ĆŸĂĄdnĂĄ disketovĂĄ mechanika!"
+msgid "%s on %s"
+msgstr "%s na %s"
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Floppy can be removed now"
-msgstr "Disketu nynĂ­ mĆŻĆŸete vyjmout"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
+"GNU/Linux spravuje čas podle GMT (Greenwich Mean Time) a pƙevádí ho na\n"
+"čas podle pƙísluĆĄnĂ© vybranĂ© časovĂ© zĂłny. Toto je moĆŸnĂ© zruĆĄit odznačenĂ­m\n"
+"volby \"Hodiny nastaveny na GMT\" a tak budou systémové hodiny stejné jako\n"
+"hardwarovĂ©. To je uĆŸitečnĂ© v pƙípadě, ĆŸe je na počítači jinĂœ operačnĂ­ "
+"systém\n"
+"typu Windows.\n"
+"\n"
+"Volba \"AutomatickĂĄ synchronizace času\" provĂĄdĂ­ automatickĂ© nastavenĂ­ "
+"hodin\n"
+"pomocĂ­ pƙipojenĂ­ k časovĂ©mu serveru na Internetu. Vyberte si v seznamu ten "
+"server,\n"
+"kterĂœ je vĂĄm nejblĂ­ĆŸ. Je samozƙejmĂ©, ĆŸe pro sprĂĄvnou funkci musĂ­te mĂ­t "
+"funkční\n"
+"pƙipojenĂ­ k Internetu. Na počítač se takĂ© nainstaluje časovĂœ server, kterĂœ\n"
+"mohou volitelně pouĆŸĂ­vat jinĂ© počítače ve vaĆĄĂ­ lokĂĄlnĂ­ sĂ­ti."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Couldn't access the floppy!"
-msgstr "Nelze pracovat s disketou!"
+msgid "Which is your timezone?"
+msgstr "JakĂ© je vaĆĄe časovĂ© pĂĄsmo?"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please insert floppy disk:"
-msgstr "ProsĂ­m vloĆŸte disketu:"
+msgid "Guinea"
+msgstr "Guinea"
-#: ../../standalone/drakTermServ:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Write Config"
-msgstr "Zapsat nastavenĂ­"
+msgid "The system is now connected to the Internet."
+msgstr "Počítač je nyní pƙipojen k internetu"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr "DynamickĂœ rozsah IP adres:"
+msgid "South Georgia and the South Sandwich Islands"
+msgstr "JiĆŸnĂ­ Georgie a ostrovy South Sandwich"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-"VětĆĄina těchto ĂșdajĆŻ byla zĂ­skĂĄna z vaĆĄeho\n"
-"bÄ›ĆŸĂ­cĂ­ho systĂ©mu. MĆŻĆŸete je upravit dle potƙeby"
+msgid "Japan (broadcast)"
+msgstr "Japonsko (broadcast)"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "NastavenĂ­ serveru dhcpd"
+msgid "Mozambique"
+msgstr "Mosambik"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "IP Range End:"
-msgstr "IP rozsah do:"
+msgid "Icon"
+msgstr "Ikona"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "IP Range Start:"
-msgstr "IP rozsah od:"
+msgid "Please choose what you want to backup"
+msgstr "ProsĂ­m vyberte si, co chcete zĂĄlohovat"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Name Servers:"
-msgstr "Jmenné servery:"
+msgid "256 colors (8 bits)"
+msgstr "256 barev (8 bitĆŻ)"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "Domain Name:"
-msgstr "Nåzev domény:"
+msgid "Read-write"
+msgstr "Pro čtení i zápis"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Broadcast Address:"
-msgstr "Adresa broadcastu:"
+msgid "Size: %s\n"
+msgstr "Velikost: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Subnet Mask:"
-msgstr "Maska podsítě:"
+msgid "Hostname: "
+msgstr "Název počítače: "
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Routers:"
-msgstr "Směrovače:"
+msgid "Chunk size %s\n"
+msgstr "Velikost bloku(chunk) %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Netmask:"
-msgstr "Maska sítě:"
+msgid "Build the future of Linux!"
+msgstr "Tvoƙte budoucnost Linuxu!"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Subnet:"
-msgstr "PodsĂ­Ć„:"
+msgid "Local Printer"
+msgstr "MĂ­stnĂ­ tiskĂĄrna"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
msgstr ""
-"Pro aktivaci změn je potƙeba správce oken restartovat.\n"
-"(pƙíkaz v konzoli: service dm restart)"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "dhcpd Config..."
-msgstr "NastavenĂ­ dhcpd..."
+" Copyright ©2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Delete Client"
-msgstr "Odebrat klienta"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "<-- Edit Client"
-msgstr "<-- Upravit klienta"
+msgid "ADSL connection"
+msgstr "ADSL pƙipojení"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add Client -->"
-msgstr "Pƙidat klienta -->"
+msgid "No configuration, please click Wizard or Advanced.\n"
+msgstr "Pro prvnĂ­ spuĆĄtěnĂ­ pouĆŸijte PrĆŻvodce nebo RozơíƙenĂ©.\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Allow Thin Clients"
-msgstr "Povolit tenké klienty"
+msgid "Error!"
+msgstr "Chyba!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Thin Client"
-msgstr "TenkĂœ klient"
+msgid "cable connection detected"
+msgstr "detekovĂĄno kabelovĂ© pƙipojenĂ­"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No net boot images created!"
-msgstr "Nepodaƙilo se vytvoƙit obraz pro spouơtění ze sítě!"
+msgid "Permission denied transferring %s to %s"
+msgstr "Povolení odepƙeno pƙi pƙenosu %s na %s"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "type: %s"
-msgstr "typ: %s"
+msgid "/_Report Bug"
+msgstr "/Nah_lĂĄsit chybu"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "<-- Del User"
-msgstr "<-- Odebrat uĆŸivatele"
+msgid "Resize"
+msgstr "Změnit velikost"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add User -->"
-msgstr "Pƙidat uĆŸivatele -->"
+msgid "Dominica"
+msgstr "Dominica"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
-msgstr ""
-"!!! Signalizuje, ĆŸe heslo v databĂĄzi je jinĂ© neĆŸ kterĂ© mĂĄ v databĂĄzi\n"
-"Terminal Server.\n"
-"SmaĆŸte/znovu pƙidejte uĆŸivatele pro povolenĂ­ pƙihlĂĄĆĄenĂ­ na Terminal Server."
+msgid "Please enter the device name to use for backup"
+msgstr "Zadejte nĂĄzev zaƙízenĂ­, na kterĂ© se bude zĂĄlohovat"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Delete All NBIs"
-msgstr "Smazat vĆĄechny NBI"
+msgid "Resolution: %s\n"
+msgstr "RozliĆĄenĂ­: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "<-- Delete"
-msgstr "<-- Smazat"
+msgid "matching"
+msgstr "shodnĂœch"
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
#, c-format
-msgid "This will take a few minutes."
-msgstr "Bude to trvat několik minut."
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
+msgstr ""
+"Nelze načíst moduly pro jĂĄdro odpovĂ­dajĂ­cĂ­ instalovanĂ©mu jĂĄdru (chybĂ­ "
+"soubor\n"
+"%s), coĆŸ obecně znamenĂĄ, ĆŸe spouĆĄtěcĂ­ disketa nemĂĄ jĂĄdro stejnĂ© jako mĂĄ "
+"instalačnĂ­ mĂ©dium (vytvoƙte prosĂ­m novou spouĆĄtěcĂ­ disketu)"
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
-msgid "Build All Kernels -->"
-msgstr "Sestavit vĆĄechna jĂĄdra -->"
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"Vyberte prosĂ­m sprĂĄvnĂœ port. Napƙíklad \"COM1\" pod MS Windows se\n"
+"v Linuxu jmenuje \"ttyS0\"."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "No NIC selected!"
-msgstr "NenĂ­ vybrĂĄna ĆŸĂĄdnĂĄ NIC!"
+msgid "The following packages are going to be removed"
+msgstr "Tyto balíčky budou odebrány"
-#: ../../standalone/drakTermServ:1
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
#, c-format
-msgid "Build Single NIC -->"
-msgstr "Sestavit jedinou NIC -->"
+msgid "Connect to the Internet"
+msgstr "Pƙipojení k Internetu"
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "No kernel selected!"
-msgstr "Nebylo zvoleno ĆŸĂĄdnĂ© jĂĄdro!"
+msgid "Use existing partitions"
+msgstr "PouĆŸĂ­t existujĂ­cĂ­ oddĂ­l"
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Build Whole Kernel -->"
-msgstr "Sestavit celé jådro -->"
+msgid "Canadian (Quebec)"
+msgstr "Kanadské (Quebec)"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Boot ISO"
-msgstr "Spouơtěcí ISO"
+msgid "Mouse device: %s\n"
+msgstr "Pƙípojení myơi: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Boot Floppy"
-msgstr "Spouơtěcí disketa"
+msgid "Reselect correct fonts"
+msgstr "Znovu vybrat språvné fonty"
-#: ../../standalone/drakTermServ:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
+"Options Description:\n"
"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
-"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
"\n"
msgstr ""
-"Pƙehled drakTermServ\n"
-"\t\t\t \n"
-" - Vytváƙí zaváděcí obrazy pro Etherboot:\n"
-" \t\tChcete-li zavĂ©st jĂĄdro skrz etherboot, musĂ­te vytvoƙit zvlĂĄĆĄtnĂ­ "
-"kombinaci jĂĄdra a initrdrd.\n"
-" \t\tVětơinu práce za vás udělá mkinitrd-net a drakTermServ je pouze "
-"grafické rozhraní\n"
-" \t\tpro pomoc se správou či pƙizpƯsobením těchto obrazƯ.\n"
-"\n"
-" - UdrĆŸuje /etc/dhcpd.conf:\n"
-" \t\tKaĆŸdĂœ ze sĂ­Ć„ově zavĂĄděnĂœch klientĆŻ potƙebuje zĂĄznam v dhcpd."
-"conf, kterĂœ mu pƙiƙadĂ­ IP adresu\n"
-" \t\ta sĂ­Ć„ovĂœ zavĂĄděcĂ­ obraz pro danĂœ počítač. drakTermServ umoĆŸnĂ­ "
-"tvorbu nebo odstranění těchto záznamƯ.\n"
-"\t\t\t\n"
-" \t\t(U PCI karet lze vynechat obraz - etherboot si vyĆŸĂĄdĂĄ sprĂĄvnĂœ "
-"obraz. Měli byste\n"
-" \t\ttakĂ© vzĂ­t v Ășvahu, ĆŸe kdyĆŸ hledĂĄ etherboot obrazy, očekĂĄvĂĄ nĂĄzvy "
-"jako\n"
-" \t\tboot-3c59x.nbi, a ne boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tTypickĂœ soubor dhcpd.conf podporujĂ­cĂ­ bezdiskovĂ© klienty vypadĂĄ "
-"jako:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tI kdyĆŸ mĆŻĆŸete pouĆŸĂ­t rozsah IP adres mĂ­sto nastavenĂ­ specifickĂ©ho "
-"zĂĄznamu pro\n"
-"\t\t\tpočítač klienta, pouĆŸitĂ­ pevnĂ© adresy vĂĄm umoĆŸnĂ­ zadat funkcionalitu\n"
-"\t\t\tdo souborƯ s nastavením pro specifického klienta, které poskytuje "
-"ClusterNFS.\n"
-"\t\t\t\n"
-"\t\t\tPoznĂĄmka: PoloĆŸku \"#type\" pouĆŸĂ­vĂĄ pouze drakTermServ. Klienti mohou "
-"bĂœt buď \"thin\"\n"
-"\t\t\tnebo \"fat\". Tencí klienti provozují větơinu software na serveru "
-"pomocí xdmcp, tlustí klienti provozují větơinu\n"
-"\t\t\tsoftware na klientskĂ©m počítači. ZvlĂĄĆĄtnĂ­ inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$, je\n"
-"\t\t\tvytvoƙen pro tenkĂ©ho klienty. SystĂ©movĂ© soubory s nastavenĂ­m xdm-"
-"config, kdmrc a gdm.conf jsou upraveny\n"
-"\t\t\tpƙi pouĆŸitĂ­ tenkĂœch klientĆŻ tak, aby povolovaly xdmcp. JelikoĆŸ pƙi "
-"pouĆŸitĂ­ xdmcp vznikajĂ­ bezpečnostnĂ­ rizika,\n"
-"\t\t\tjsou upraveny soubory hosts.deny a hosts.allow tak, aby omezily "
-"pƙístup pouze z lokální sítě.\n"
-"\t\t\t\n"
-"\t\t\tPoznámka: Po pƙidání nebo odebrání klientƯ musíte zastavit a znovu "
-"spustit server.\n"
-"\t\t\t\n"
-" - UdrĆŸuje /etc/exports:\n"
-" \t\tClusterNFS dovoluje exportovat koƙenovĂœ souborovĂœ systĂ©m na "
-"bezdiskové klienty. drakTermServ\n"
-" \t\tnastavĂ­ odpovĂ­dajĂ­cĂ­ zĂĄznam tak, aby umoĆŸnil anonymnĂ­ pƙístup ke "
-"koƙenovĂ©mu souborovĂ©mu systĂ©mu\n"
-" \t\tbezdiskovĂœm klientĆŻm.\n"
-"\n"
-" \t\tTypickĂœ zĂĄznam pro export ClusterNFS vypadĂĄ:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tSe SUBNET/MASK odpovĂ­dajĂ­cĂ­ vaĆĄĂ­ sĂ­ti.\n"
-" \t\t\n"
-" - UdrĆŸuje /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tAby se mohli uĆŸivatelĂ© pƙihlĂĄsit do systĂ©mu z bezdiskovĂœch "
-"stanic, musĂ­ bĂœt duplikovĂĄn\n"
-" \t\tjejich zĂĄznam z /etc/shadow v /etc/shadow\\$\\$CLIENTS\\$\\$. "
-"drakTermServ v tomto ohledu\n"
-" \t\tpomĂĄhĂĄ pƙidĂĄnĂ­m nebo odebrĂĄnĂ­m uĆŸivatelĆŻ systĂ©mu z tohoto "
-"souboru.\n"
-"\n"
-" - /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$ pro kaĆŸdĂ©ho klienta:\n"
-" \t\tSkrze ClusterNFS mĆŻĆŸe mĂ­t kaĆŸdĂœ bezdiskovĂœ klient svĂ© vlastnĂ­ "
-"unikĂĄtnĂ­ soubory s nastavenĂ­m\n"
-" \t\tumĂ­stěnĂ© na serveru v koƙenovĂ©m souborovĂ©m systĂ©mu. drakTermServ "
-"bude v budoucnu pomĂĄhat\n"
-" \t\ts tvorbou těchto souborƯ.\n"
-"\n"
-" - Soubory s nastavenĂ­m systĂ©mu pro kaĆŸdĂ©ho klienta:\n"
-" \t\tSkrze ClusterNFS mĆŻĆŸe mĂ­t kaĆŸdĂœ bezdiskovĂœ klient svĂ© vlastnĂ­ "
-"unikĂĄtnĂ­ soubory s nastavenĂ­m\n"
-" \t\tumĂ­stěnĂ© na serveru v koƙenovĂ©m souborovĂ©m systĂ©mu. drakTermServ "
-"bude v budoucnu pomĂĄhat\n"
-" \t\ts tvorbou těchto souborƯ,\n"
-" \t\tnapƙ. /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard zvlĂĄĆĄĆ„ pro\n"
-" \t\tkaĆŸdĂ©ho klienta.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ nastavĂ­ tento soubor tak, aby pracoval v souladu s "
-"obrazy vytvoƙenĂœmi pomocĂ­\n"
-" \t\tmkinitrd-net a zĂĄznamy v /etc/dhcpd.conf tak, aby byl kaĆŸdĂ©mu "
-"bezdiskovému klientu poskytnut\n"
-" \t\todpovídající zaváděcí obraz.\n"
-"\n"
-" \t\tTypickĂœ soubor s nastavenĂ­m tftp vypadĂĄ takto:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tZměny oproti vĂœchozĂ­ instalaci zahrnujĂ­ změnu pƙíznaku disable "
-"na\n"
-" \t\t'no' a změnu cesty adresáƙe na /var/lib/tftpboot, kam ukládá\n"
-" \t\tmkinitrd-net své obrazy.\n"
+"popis voleb:\n"
"\n"
-" - Vytváƙí diskety a CD etherboot:\n"
-" \t\tBezdiskovĂ© klientskĂ© počítače potƙebujĂ­ buď obrazy ROM na NIC, "
-"nebo zaváděcí disketu\n"
-" \t\tnebo CD, aby mohly spustit zaváděcí sekvenci. drakTermServ "
-"pomĆŻĆŸe tyto zavĂĄděcĂ­ obrazy generovat,\n"
-" \t\tv zåvislosti na NIC na klientském stroji.\n"
-" \t\t\n"
-" \t\tZákladní pƙíklad ručního vytvoƙení zaváděcího obrazu diskety pro "
-"kartu 3Com 3c509:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Buďte opatrnĂ­ pƙi zĂĄlohovĂĄnĂ­ na FTP, protoĆŸe na server je poslĂĄna\n"
+"pouze jiĆŸ vytvoƙenĂĄ zĂĄloha.\n"
+"Je tudĂ­ĆŸ vhodnĂ© nejdƙíve provĂ©st zĂĄlohu na disk pƙed tĂ­m, neĆŸ\n"
+"ji poĆĄlete na server.\n"
"\n"
-#: ../../standalone/drakTermServ:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"Options\n"
"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
-"\n"
-"\n"
-" Poděkování:\n"
-"\t- LTSP Projekt http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+"PoslednĂ­ otĂĄzka je na to, zda chcete spustit grafickĂ© prostƙedĂ­ pƙi startu.\n"
+"Tato otĂĄzka se zobrazĂ­ i v pƙípadě, ĆŸe nastavenĂ­ pƙedtĂ­m neotestujete.\n"
+"Je zƙejmĂ©, ĆŸe odpovĂ­te \"Ne\" v pƙípadě, ĆŸe počítač bude pracovat\n"
+"jako server nebo v pƙípadě, ĆŸe se nepodaƙilo sprĂĄvně nastavit grafickou "
+"kartu."
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
-msgstr ""
-"\n"
-" Copyright ©2002 by MandrakeSoft \n"
-"\tStew Benedict <sbenedict\\@mandrakesoft.com>\n"
-"\n"
+msgid "We are now going to configure the %s connection."
+msgstr "Nyní se pƙipravuje konfigurace %s pƙipojení."
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Add/Del Clients"
-msgstr "Pƙidat/Odebrat klienty"
+msgid "MandrakeExpert Corporate"
+msgstr "MandrakeExpert Corporate"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Add/Del Users"
-msgstr "Pƙidat/Odebrat uĆŸivatele"
+msgid ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
+msgstr ""
+" [vĆĄechno]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Write protection"
+msgstr "Autodetekce tiskĂĄrny"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "You've not selected any font"
+msgstr "nelze nalĂ©zt ĆŸĂĄdnĂœ font.\n"
+
+#: ../../steps.pm:1
#, c-format
-msgid "Net Boot Images"
-msgstr "Startovací image ze sítě"
+msgid "Language"
+msgstr "VĂœběr jazyka"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "Disketa Etherboot/ISO"
+msgid "Printer model selection"
+msgstr "VĂœběr modelu tiskĂĄrny"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Stop Server"
-msgstr "Zastavit server"
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
+msgstr "TĂ­m ĆŸe změnĂ­te typ oddĂ­lu %s pƙijdete o vĆĄechna jeho data"
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
#, c-format
-msgid "Start Server"
-msgstr "Spustit server"
+msgid "%d seconds"
+msgstr "%d sekund"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Disable Server"
-msgstr "Vypnout server"
+msgid "Insert a blank floppy in drive %s"
+msgstr "VloĆŸte prĂĄzdnou disketu do %s"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Enable Server"
-msgstr "Zapnout server"
+msgid "A valid URI must be entered!"
+msgstr "MusĂ­ bĂœt zadĂĄno sprĂĄvnĂ© URI!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "NastavenĂ­ Mandrake Terminal Server"
+msgid "Found \"%s\" interface do you want to use it ?"
+msgstr "Chcete pouĆŸĂ­t nalezenĂ© rozhranĂ­ \"%s\" ?"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Remove the last item"
-msgstr "Odstranit poslednĂ­ poloĆŸku"
+msgid "Re-configure interface and DHCP server"
+msgstr "Pƙenastavení rozhraní a DHCP serveru"
-#: ../../standalone/drakautoinst:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Add an item"
-msgstr "Pƙidat poloĆŸku"
+msgid "Sound configuration"
+msgstr "NastavenĂ­ zvuku"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Auto Install"
-msgstr "AutomatickĂĄ instalace"
+msgid "Photo test page"
+msgstr "TestovacĂ­ strĂĄnka s fotografiĂ­"
-#: ../../standalone/drakautoinst:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Disketa byla s Ășspěchem vytvoƙena.\n"
-"Nyní lze provést znovu instalaci."
+msgid "Custom disk partitioning"
+msgstr "Vlastní rozdělení disku"
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congratulations!"
-msgstr "Gratuluji!"
+msgid "Enter Printer Name and Comments"
+msgstr "Zadejte název tiskárny a komentáƙ"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"The following printers\n"
"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
+"NĂĄsledujĂ­cĂ­ tiskĂĄrny\n"
"\n"
-"VĂ­tejte.\n"
-"\n"
-"Parametry pro automatickou instalaci jsou pƙístupnĂ© v sekci nalevo"
+"%s %s\n"
+"jsou pƙímo pƙipojeny k vaơemu počítači"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Creating auto install floppy"
-msgstr "Vytváƙím disketu pro automatickou instalaci"
+msgid "type: %s"
+msgstr "typ: %s"
-#: ../../standalone/drakautoinst:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "manual"
-msgstr "ručně"
+msgid "Slovakian (QWERTY)"
+msgstr "Slovenské (QWERTY)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/draksound:1
#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Vyberte prosĂ­m, kterĂœ z krokĆŻ instalace mĂĄ bĂœt proveden automaticky stejně "
-"jako instalační program nebo bude ručně zadán"
+msgid "No Sound Card detected!"
+msgstr "Nebyla nalezena ĆŸĂĄdnĂĄ zvukovĂĄ karta!"
-#: ../../standalone/drakautoinst:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "NastavenĂ­ automatickĂœch krokĆŻ"
+msgid "Mouse Port"
+msgstr "Pƙipojení myơi"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "replay"
-msgstr "zopakovat"
+msgid ""
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
+msgstr ""
+"Pro aktivaci změn je potƙeba správce oken restartovat.\n"
+"(pƙíkaz v konzoli: service dm restart)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Ftp Server"
+msgstr "Server FTP"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+"Arguments: (arg)\n"
"\n"
-"Do you want to continue?"
+"Enable/Disable msec hourly security check."
msgstr ""
-"Zde mĆŻĆŸete nastavit disketu pro automatickou instalaci. Tato volba je někdy "
-"nebezpečnĂĄ a měla by se pouĆŸĂ­vat s opatrnostĂ­.\n"
-"\n"
-"Tato disketa dovoluje zopakovat instalaci, kterĂĄ jiĆŸ na tomto počítači byla "
-"provedena s tĂ­m, ĆŸe v některĂœch krocĂ­ch lze zadat jinĂ© hodnoty.\n"
-"\n"
-"Pro maximální bezpečnost není rozdělování diskƯ ani formátování prováděno "
-"automaticky, i pƙesto, pokud to pƙi instalaci zvolíte.\n"
+"Argumenty: (arg)\n"
"\n"
-"Chcete pokračovat?"
+" PovolĂ­/ZakĂĄĆŸe bezpečnostnĂ­ kontrolu pravidelně kaĆŸdou hodinu."
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "Nastavení automatické instalace"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "%s fonts conversion"
+msgstr "konverze pfm fontĆŻ"
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Nemohu najĂ­t potƙebnĂœ soubor '%s ' s obrazem."
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the type of bus on which the mouse is connected"
+msgstr "Typ sběrnice, ke kterĂ© je pƙipojena myĆĄ"
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
#, c-format
-msgid "Error!"
-msgstr "Chyba!"
+msgid "Uganda"
+msgstr "Uganda"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (size)\n"
"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
+"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
+"Argumenty: (velikost)\n"
"\n"
-"ProblĂ©my pƙi obnově:\n"
-"\n"
-"Pƙi obnovování DrakBackup nejdƙíve ověƙuje vơechny\n"
-"zålohované soubory.\n"
-"Pƙed tĂ­m, neĆŸ je soubor obnoven, provede DrakBackup vĂœmaz\n"
-"pƯvodního souboru, a tak pƙijdete o vơechna data.\n"
-"Buďte proto opatrnĂ­ a nesnaĆŸte se modifikovat zĂĄlohovanĂĄ\n"
-"data ručně.\n"
-"\n"
+"Nastaví velikost historie pro pƙíkazy. Hodnota -1 znamená neomezená."
-#: ../../standalone/drakbackup:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"options description:\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
"\n"
-msgstr ""
-"popis voleb:\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
"\n"
-"Buďte opatrnĂ­ pƙi zĂĄlohovĂĄnĂ­ na FTP, protoĆŸe na server je poslĂĄna\n"
-"pouze jiĆŸ vytvoƙenĂĄ zĂĄloha.\n"
-"Je tudĂ­ĆŸ vhodnĂ© nejdƙíve provĂ©st zĂĄlohu na disk pƙed tĂ­m, neĆŸ\n"
-"ji poĆĄlete na server.\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
"\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"Description:\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
+"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
msgstr ""
-"Popis:\n"
+"\"Zvuková karta\": pokud je detekována v počítači zvuková karta, je zde\n"
+"zobrazena. Pokud ale vidĂ­te, ĆŸe zobrazenĂĄ karta nenĂ­ pƙesně tak, kterou\n"
+"mĂĄte v počítači, mĆŻĆŸete klepnutĂ­m na tlačítko vybrat jinou kartu a ovladač."
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Comoros"
+msgstr "Comoros"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid ""
"\n"
-" DrakBackup je nåstroj na zålohovåní systému.\n"
-" Během konfigurace mĆŻĆŸete vybrat: \n"
-"\t- Systémové soubory,\n"
-"\t- Soubory uĆŸivatelĆŻ,\n"
-"\t- OstatnĂ­ soubory.\n"
-"\tnebo CelĂœ systĂ©m a jinĂ© (jako jsou oddĂ­ly s Windows).\n"
"\n"
-" DrakBackup dovoluje zĂĄlohovat na:\n"
-"\t- PevnĂœ disk.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (se spuơtěním, záchranou a autoinstalací).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- WebDAV.\n"
-"\t- PĂĄskovou jednotku.\n"
"\n"
-" DrakBackup dovoluje provĂ©st obnovu do vybranĂ©ho adresáƙe.\n"
+"We are now going to configure the %s connection.\n"
"\n"
-" Jako vĂœchozĂ­ jsou umĂ­stěny vĆĄechny zĂĄlohy do adresáƙe\n"
-" /var/lib/drakbackup \n"
"\n"
-" Konfigurační soubor:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"Press OK to continue."
+msgstr ""
"\n"
"\n"
-"Postup pƙi obnově:\n"
"\n"
-" Pƙi provádění obnovy odstraní DrakBackup pƯvodní adresáƙ\n"
-" a ověƙí, ĆŸe zĂĄlohovanĂ© soubory nejsou poĆĄkozeny.\n"
-" Doporučuje se ale provĂ©st zĂĄlohu těchto dat pƙed provedenĂ­m\n"
-" obnovy.\n"
+"Nyní se bude konfigurovat pƙipojení %s.\n"
"\n"
"\n"
+"Stiskněte OK pro pokračování."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
-msgstr ""
-" aktualizace 2002 MandrakeSoft od Stewa Benedicta <sbenedict\\@mandrakesoft."
-"com>"
+msgid "Yaboot mode"
+msgstr "ReĆŸim Yaboot"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
+msgstr "USA (kabel)"
+
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
-" Copyright ©2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
+"Nelze znovu spustit LiLo!\n"
+"Chcete-li dokončit instalaci tĂ©matu pro LiLo, spusĆ„te na pƙíkazovĂ© ƙádce "
+"\"lilo\" jako uĆŸivatel root."
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Standardní tƙítlačítková myơ"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Select another media to restore from"
+msgstr "Vyberte dalĆĄĂ­ mĂ©dium, kde jsou umĂ­stěny zĂĄlohy"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Software Manager"
+msgstr "SprĂĄvce software"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"restore description:\n"
+"Restore Description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
@@ -14358,17 +13710,19 @@ msgid ""
"\n"
" - Incremental Backups:\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
msgstr ""
"Popis voleb pro obnovu:\n"
@@ -14395,5041 +13749,5725 @@ msgstr ""
"\n"
"\n"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-"popis voleb:\n"
-"\n"
-"- ZĂĄloha systĂ©movĂœch souborĆŻ:\n"
-" \n"
-"\tTato volba zĂĄlohuje adresáƙ /etc, kterĂœ obsahuje vĆĄechny\n"
-"\tkonfigurační soubory. Dávejte pozor pƙi obnově na to,\n"
-"\taby se nepƙepsaly soubory:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - ZĂĄlohovat soubory uĆŸivatelĆŻ:\n"
-"\n"
-"\tTato volba dovoluje vybrat vĆĄechny uĆŸivatele, kterĂ©\n"
-"\t\tchcete zĂĄlohovat.\n"
-"\tAby se uĆĄetƙilo mĂ­sto na disku, nenĂ­ dobrĂ© zahrnout cache\n"
-"\tod prohlĂ­ĆŸeče.\n"
-"\n"
-" - ZĂĄlohovat ostatnĂ­ soubory:\n"
-"\n"
-"\tTato volba dovolí pƙidat dalơí data pro zálohování.\n"
-"\tV současnosti nenĂ­ moĆŸnĂ© pƙi tomto zĂĄlohovĂĄnĂ­ zvolit\n"
-"\tpƙírĆŻstkovĂ© zĂĄlohovĂĄnĂ­.\t\n"
-"\n"
-" - PƙírĆŻstkovĂ© zĂĄlohovĂĄnĂ­:\n"
-"\n"
-"\tPƙírĆŻstkovĂ© zĂĄlohovĂĄnĂ­ je velmi mocnĂœ druh zĂĄlohovĂĄnĂ­,\n"
-"\tprotoĆŸe dovoluje zĂĄlohovat vĆĄechna data pouze poprvĂ©\n"
-"\ta dále se zálohují pouze změny.\n"
-"\tBěhem obnovy tak budete moci zadat, od jakĂ©ho data se\n"
-"\tmajĂ­ data obnovit.\n"
-"\tPokud nezvolĂ­te tuto moĆŸnost, bude pƙi kaĆŸdĂ© zĂĄloze\n"
-"\tpƙedchozí záloha smazána.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" NěkterĂ© chyby pƙi nastavenĂ­ poĆĄty jsou zpĆŻsobeny\n"
-" ơpatnou konfigurací programu postfix. Pro vyƙeơení\n"
-" nastavte myhostname a mydomain v /etc/postfix/main.cf\n"
-"\n"
+msgid "Re-submit"
+msgstr "Znovu odeslat"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-"Popis voleb:\n"
-"\n"
-" V tomto kroku vĂĄm aplikace DrakBackup umoĆŸnĂ­ změnit:\n"
-"\n"
-" - ReĆŸim komprese:\n"
-" \n"
-" Pokud zvolĂ­te kompresi bzip2, budete mĂ­t kompresi\n"
-" lepĆĄĂ­ neĆŸ pomocĂ­ gzip (okolo 2-10%%).\n"
-" Tato volba nenĂ­ zvolena jako vĂœchozĂ­, protoĆŸe\n"
-" vyĆŸaduje daleko vĂ­ce času (aĆŸ o 1000%% vĂ­ce).\n"
-"\n"
-" - ReĆŸim aktualizace:\n"
-"\n"
-" Tato volba aktualizuje zĂĄlohu, ale nenĂ­ moc uĆŸitečnĂĄ,\n"
-" protoĆŸe pƙed aktualizacĂ­ musĂ­te nejdƙíve zĂĄlohu\n"
-" dekomprimovat.\n"
-" \n"
-"- ReĆŸim pouĆŸitĂ­ souboru .backupignore:\n"
-"\n"
-" Stejně jako pro cvs, i pro DrakBackup lze uvĂ©st seznam\n"
-" souborĆŻ v .backupignore, kterĂ© budou pƙi zĂĄlohovĂĄnĂ­ ignorovĂĄny.\n"
-" napƙ.:\n"
-" \\$> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
+msgid "CD in place - continue."
+msgstr "CD je v mechanice - pokračovat."
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Drakbackup"
-msgstr "DrakBackup"
+msgid "KB"
+msgstr "kB"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restore"
-msgstr "Obnovit"
+msgid "Network & Internet"
+msgstr "SĂ­Ć„ & Internet"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup Now"
-msgstr "ZĂĄlohovat nynĂ­"
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Litevské \"foneticky\" QWERTY"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Advanced Configuration"
-msgstr "Rozơíƙená konfigurace"
+msgid "Net Boot Images"
+msgstr "Startovací image ze sítě"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Wizard Configuration"
-msgstr "PrĆŻvodce konfiguracĂ­"
+msgid "Sharing of local scanners"
+msgstr "SdĂ­lenĂ­ lokĂĄlnĂ­ch skenerĆŻ"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "View Backup Configuration."
-msgstr "Prohlédnout konfiguraci zålohy."
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr "Plug'n Play detekce selhala. Vyberte prosĂ­m pƙesnĂœ monitor"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Backup Now from configuration file"
-msgstr "Zálohovat z konfiguračního souboru"
+msgid "Services and deamons"
+msgstr "SluĆŸby a dĂ©moni"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Drakbackup Configuration"
-msgstr "NastavenĂ­ pro DrakBackup"
+msgid "Remote host name missing!"
+msgstr "ChybĂ­ nĂĄzev vzdĂĄlenĂ©ho počítače!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Total Progress"
-msgstr "CelkovĂœ prĆŻběh"
+msgid "with /usr"
+msgstr "s /usr"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sending files..."
-msgstr "PosĂ­lĂĄm soubory..."
+msgid "Network"
+msgstr "SĂ­Ć„"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "files sending by FTP"
-msgstr "soubory poslanĂ© pƙes FTP"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgstr "Automaticky nalĂ©zt tiskĂĄrny sdĂ­lenĂ© počítači s Microsoft Windows"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup other files"
-msgstr "ZĂĄlohovat dalĆĄĂ­ soubory"
+msgid "This password is too simple"
+msgstr "Toto heslo je pƙíliĆĄ jednoduchĂ©"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup user files"
-msgstr "ZĂĄlohovat uĆŸivatelskĂ© soubory"
+msgid "Slovakian (QWERTZ)"
+msgstr "Slovenské (QWERTZ)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "Backup system files"
-msgstr "Zålohovat systémové soubory"
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
+"Tvoƙit a upravovat v rĆŻznĂœch jazycĂ­ch jako Perl, Python, C a C++ nebylo "
+"nikdy tak jednoduchĂ© dĂ­ky GNU gcc 3 a nejlepĆĄĂ­m vĂœvojovĂœm prostƙedĂ­m ze "
+"světa Open Source."
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Under Devel ... please wait."
-msgstr "Vyvíjí se... čekejte prosím."
+msgid "Truly minimal install (especially no urpmi)"
+msgstr "Opravdu minimální instalace (speciálně bez urpmi)"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+" Transfer \n"
+"Now"
msgstr ""
-"Nebyl nalezen konfigurační soubor, \n"
-"klepněte na PrĆŻvodce nebo na RozơíƙenĂ©."
+" Pƙenos \n"
+"NynĂ­"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please select data to backup..."
-msgstr "Zkontrolujte prosĂ­m data pro zĂĄlohovĂĄnĂ­..."
+msgid "Use daemon"
+msgstr "PouĆŸĂ­t dĂ©mona"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
#, c-format
-msgid "Please select media for backup..."
-msgstr "Prosím zvolte si médium pro zålohy..."
+msgid "Authentication"
+msgstr "Ověƙení"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please select data to restore..."
-msgstr "ProsĂ­m zvolte data pro obnovu..."
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Pƙidat tuto tiskárnu do Star Office/OpenOffice.org/GIMP"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Je potƙeba nainstalovat tyto balíčky:\n"
+msgid "Additional CUPS servers: "
+msgstr "DalĆĄĂ­ CUPS servery: "
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
-"Chyba pƙi posílání souboru pƙes FTP.\n"
-" ProsĂ­m opravte vaĆĄe nastavenĂ­ FTP."
+"Vyberte ze seznamu jednu z automaticky nalezenĂœch tiskĂĄren nebo zadejte do "
+"políček nĂĄzev nebo IP adresu tiskĂĄrny a volitelně číslo portu (vĂœchozĂ­ je "
+"9100)."
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount %s?"
+msgstr "Kam chcete pƙipojit %s?"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Restore Via Network"
+msgstr "Obnovit pƙes sĂ­Ć„"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Algeria"
+msgstr "AlĆŸĂ­rsko"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd-size"
+msgstr "Initrd-velikost"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
-"Chyba pƙi posílání poơty\n"
-" VĂĄmi zvolenĂœ report nebyl odeslĂĄn\n"
-" Proveďte prosím nastavení sendmailu"
+"V pƙípadě, ĆŸe je pro vaĆĄi kartu moĆŸno pouĆŸĂ­t vĂ­ce rĆŻznĂœch serverĆŻ s 3D\n"
+"akceleracĂ­ nebo bez, zĂĄleĆŸĂ­ na vaĆĄem vĂœběru, kterĂœ vĂĄm nejvĂ­ce vyhovuje."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Next"
-msgstr "DalĆĄĂ­"
+msgid "\tBackups use tar and gzip\n"
+msgstr "\tZĂĄlohovĂĄnĂ­ pouĆŸĂ­vĂĄ tar a gzip\n"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Previous"
-msgstr "Pƙedchozí"
+msgid "2 MB"
+msgstr "2 MB"
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Save"
-msgstr "UloĆŸit"
+msgid ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
+"[VOLBY]...\n"
+" -no-confirmation nepotvrzuje prvnĂ­ otĂĄzku v reĆŸimu MandrakeUpdate\n"
+" --no-verify-rpm neprovádí ověƙení podpisu u balíčkƯ\n"
+" --changelog-first v okně s popisem nejdƙíve zobrazí changelog pƙed "
+"seznamem souborĆŻ\n"
+" --merge-all-rpmnew navrhne spojit vƥechny nalezené soubory .rpmnew/."
+"rpmsave"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build Backup"
-msgstr "Vytvoƙit zálohu"
+msgid "Setting Default Printer..."
+msgstr "Nastavuji vĂœchozĂ­ tiskĂĄrnu..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Restore Progress"
-msgstr "PrƯběh obnovení"
+msgid "Interface %s (using module %s)"
+msgstr "RozhranĂ­ %s (pouĆŸĂ­vĂĄ modul %s)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Restore From Catalog"
-msgstr "Obnovit z katalogu"
+msgid "Name: %s\n"
+msgstr "Jméno: %s\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Browse to new restore repository."
-msgstr "ProchĂĄzet nově obnovenĂœ adresáƙ."
+msgid "Generating preview ..."
+msgstr "Generuji nĂĄhled ..."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "CD in place - continue."
-msgstr "CD je v mechanice - pokračovat."
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
+msgstr ""
+"Frekvence mĂĄ povolenĂ© pƙípony k, M nebo G (napƙíklad \"2,46G\" pro frekvenci "
+"2,46 GHz) nebo pƙidejte dostatek '0' (nul)."
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Custom Restore"
-msgstr "VlastnĂ­ obnova"
+msgid "serial"
+msgstr "SĂ©riovĂĄ"
-#: ../../standalone/drakbackup:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Restore all backups"
-msgstr "Obnovit vĆĄechny zĂĄlohy"
+msgid "DVD-ROM"
+msgstr "DVD-ROM"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Failed..."
-msgstr "Obnova selhala..."
+msgid "Georgian (\"Latin\" layout)"
+msgstr "GruzĂ­nskĂ© (rozloĆŸenĂ­ \"Latin\")"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Files Restored..."
-msgstr "Soubory obnoveny..."
+msgid "Get the best items with Mandrake Linux Strategic partners"
+msgstr ""
+"ZĂ­skejte to nejlepĆĄĂ­ se StrategickĂœmi partnery distribuce Mandrake Linux"
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Path or Module required"
-msgstr "VyĆŸadovĂĄna cesta nebo modul"
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
+msgstr ""
+"NynĂ­ lze zadat volby pro modul %s.\n"
+"Pozn.: kaĆŸdĂĄ adresa by měla bĂœt ve tvaru 0x napƙ. '0x123'"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Hostname required"
-msgstr "VyĆŸadovĂĄn nĂĄzev počítače"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
+msgstr ""
+"Mandrake Linux 9.1 vĂĄm poskytuje OvlĂĄdacĂ­ centrum Mandrake, mocnĂœ nĂĄstroj "
+"pro plnĂ© pƙizpĆŻsobenĂ­ vaĆĄeho počítače vaĆĄim potƙebĂĄm. Nastavte a pƙizpĆŻsobte "
+"si prvky jako Ășroveƈ zabezpečenĂ­, pƙídavnĂĄ zaƙízenĂ­ (obrazovku, myĆĄ, "
+"klávesnici...), pƙipojení k Internetu a daleko více!"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Username required"
-msgstr "VyĆŸadovĂĄno uĆŸivatelskĂ© jmĂ©no"
+msgid "Kenya"
+msgstr "Keƈa"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Password required"
-msgstr "VyĆŸadovĂĄno heslo"
+msgid "Use ``Unmount'' first"
+msgstr "Nejprve pouĆŸijte ''Odpojit''"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Host Path or Module"
-msgstr "Cesta na počítači nebo modul"
+msgid "Installing mtools packages..."
+msgstr "Instaluji balíčky pro mtools..."
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Host Name"
-msgstr "Název počítače"
+msgid "You must specify a root partition"
+msgstr "MusĂ­te zadat koƙenovĂœ oddĂ­l"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr "Obnovit pƙes sĂ­Ć„ pomocĂ­ protokolu: %s"
+msgid "first step creation"
+msgstr "první krok pƙi vytváƙení"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Via Network"
-msgstr "Obnovit pƙes sĂ­Ć„"
+msgid "Both Shift keys simultaneously"
+msgstr "Obě klávesy Shift současně"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr "PĂĄska nemĂĄ sprĂĄvnĂœ nĂĄzev. MĂĄ označenĂ­ %s."
+msgid "Select a scanner model"
+msgstr "Zvolte si model skeneru"
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-"VloĆŸte pĂĄsku s nĂĄzvem %s\n"
-" do påskové jednotky %s"
+msgid "LPRng - LPR New Generation"
+msgstr "LprNG - LPR Nové generace"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore From Tape"
-msgstr "Obnovit z pĂĄsky"
+msgid "Drakbackup Configuration"
+msgstr "NastavenĂ­ pro DrakBackup"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr "CD nemĂĄ sprĂĄvnĂœ nĂĄzev. Je označeno %s."
+msgid "Save as.."
+msgstr "UloĆŸit jako..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
msgstr ""
-"VloĆŸte CD s označenĂ­m %s do CD\n"
-" mechaniky do pƙípojnĂ©ho bodu /mnt/cdrom"
+"Toto rozhraní jeơtě nebylo nastaveno.\n"
+"SpusƄte prƯvodce konfigurací z hlavního okna"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore From CD"
-msgstr "Obnovit z CD"
+msgid "Korea (North)"
+msgstr "Korea (SevernĂ­)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup files not found at %s."
-msgstr "Souboru pro zĂĄlohu z %s nenalezeny."
+msgid "Autologin"
+msgstr "AutomatickĂ© pƙihlĂĄĆĄenĂ­"
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Change\n"
-"Restore Path"
-msgstr ""
-"Změnit adresáƙ\n"
-"pro obnovu"
+msgid "System configuration"
+msgstr "Konfigurace systému"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Domain Admin Password"
+msgstr "Heslo Språvce domény"
+
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Files"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
msgstr ""
-"VybrĂĄna obnova\n"
-"Soubory"
+"Bezvadně pƙizpĆŻsobte vĂĄĆĄ počítač vaĆĄim potƙebĂĄm dĂ­ky 11 uĆŸivatelskĂœm "
+"rozhraním, které jsou k dispozici v distribuci Mandrake Linux a které lze "
+"plně upravovat: KDE 3.1, GNOME 2.2, WindowMaker, ..."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Configuring printer ..."
+msgstr "Nastavuji tiskĂĄrnu ..."
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
-"VybrĂĄna obnova\n"
-"ZĂĄznam katalogu"
+"Pro zachovĂĄnĂ­ integrity po provedenĂ© změně velikosti oddĂ­lu(ĆŻ) bude pƙi\n"
+"dalĆĄĂ­m spuĆĄtěnĂ­ systĂ©mu Windows provedena kontrola souborovĂ©ho systĂ©mu."
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Remove user directories before restore."
-msgstr "Odebrat adresáƙe uĆŸivatele pƙed obnovou."
+msgid "MB"
+msgstr "MB"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "ProvĂ©st novou zĂĄlohu pƙed obnovou (pouze pro pƙírĆŻstkovou zĂĄlohu)"
+msgid "if set to yes, run some checks against the rpm database."
+msgstr "pokud je nastaveno, spouĆĄtĂ­ kontrolu rpm databĂĄze."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "select path to restore (instead of /)"
-msgstr "vyberte cestu pro obnovenĂ­ (mĂ­sto /)"
+msgid "Virgin Islands (British)"
+msgstr "Panenské ostrovy (britské)"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore Other"
-msgstr "Obnovit ostatnĂ­"
+msgid "Bermuda"
+msgstr "Bermudy"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Restore Users"
-msgstr "Obnovit uĆŸivatele"
+msgid "click here if you are sure."
+msgstr "klepněte zde, pokud jste si jisti."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore system"
-msgstr "Obnovit systém"
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
+msgstr ""
+"Nebyl nalezen konfigurační soubor, \n"
+"klepněte na PrĆŻvodce nebo na RozơíƙenĂ©."
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Other Media"
-msgstr "Dalƥí média"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"Zde je vypsĂĄn seznam jiĆŸ existujĂ­cĂ­ch detekovanĂœch oddĂ­lĆŻ na pevnĂ©m disku.\n"
+"MĆŻĆŸete ponechat volby detekovanĂ© prĆŻvodcem, protoĆŸe ve větĆĄině pƙípadĆŻ\n"
+"vyhovujĂ­. Pokud chcete provĂ©st nějakĂ© změny, musĂ­te definovat aspoƈ "
+"koƙenovĂœ\n"
+"oddĂ­l (\"/\"). Velikost oddĂ­lĆŻ zvolte dostatečnou, jinak nebude moĆŸnĂ© "
+"nainstalovat\n"
+"dostatečnĂ© mnoĆŸstvĂ­ programĆŻ. Pokud chcete uklĂĄdat data na zvlĂĄĆĄtnĂ­ oddĂ­l,\n"
+"vytvoƙte takĂ© oddĂ­l \"/home\".\n"
+"\n"
+"KaĆŸdĂœ oddĂ­l vypsanĂœ nĂ­ĆŸe mĂĄ: \"NĂĄzev\", \"Velikost\".\n"
+"\n"
+"\"NĂĄzev\" je sloĆŸen nĂĄsledovně: \"typ pevnĂ©ho disku\", \"číslo disku\",\n"
+"\"číslo oddílu\". (napƙíklad \"hda1\").\n"
+"\n"
+"Pokud måte IDE disky, pak je \"typ pevného disku\" \"hd\", pokud måte SCSI,\n"
+"označení bude \"sd\".\n"
+"\n"
+"\"Číslo disku\" je vĆŸdy pĂ­smeno za \"hd\" nebo \"sd\". Pro IDE disky je "
+"takto:\n"
+"\n"
+" * \"a\" znamená \"master disk na primárním IDE ƙadiči\",\n"
+"\n"
+" * \"b\" znamená \"slave disk na primárním IDE ƙadiči\",\n"
+"\n"
+" * \"c\" znamená \"master disk na sekundárním IDE ƙadiči\",\n"
+"\n"
+" * \"d\" znamená \"slave disk na sekundárním IDE ƙadiči\".\n"
+"\n"
+"Pro SCSI disky platĂ­, ĆŸe \"a\" je \"nejmenĆĄĂ­ SCSI ID\", \"b\" je \"druhĂ©\n"
+"nejmenĆĄĂ­ SCSI ID\" atd."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Select another media to restore from"
-msgstr "Vyberte dalĆĄĂ­ mĂ©dium, kde jsou umĂ­stěny zĂĄlohy"
+msgid "Remove"
+msgstr "Odebrat"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the directory where backups are stored"
-msgstr "Zadejte adresáƙ, kde jsou umístěny zálohy"
+msgid "Lesotho"
+msgstr "Lesotho"
-#: ../../standalone/drakbackup:1
+#: ../../ugtk2.pm:1
#, c-format
-msgid "Restore from Hard Disk."
-msgstr "Obnovit z pevného disku."
+msgid "utopia 25"
+msgstr "utopia 25"
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Use quota for backup files."
-msgstr "PouĆŸĂ­t kvĂłty pro zĂĄloĆŸnĂ­ soubory."
+msgid "Pipe job into a command"
+msgstr "Poslat tiskovou Ășlohu do pƙíkazu"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
+msgid "new dynamic device name generated by core kernel devfs"
msgstr ""
-"Zadejte prosĂ­m maximĂĄlnĂ­ velikost\n"
-" povolenou pro DrakBackup"
+"novĂœ, dynamickĂœ nĂĄzev zaƙízenĂ­, kterĂœ generuje zabudovanĂœ systĂ©m jĂĄdra devfs"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Please enter the directory to save:"
-msgstr "Zadejte adresáƙ, kam bude umístěna záloha:"
+msgid "Yes"
+msgstr "Ano"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use Hard Disk to backup"
-msgstr "PouĆŸĂ­t pro zĂĄlohovĂĄnĂ­ pevnĂœ disk"
+msgid "Cote d'Ivoire"
+msgstr "Cote d'Ivoire"
-#: ../../standalone/drakbackup:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "please choose the date to restore"
-msgstr "Vyberte datum obnovenĂ­ zĂĄlohy"
+msgid "Which protocol do you want to use?"
+msgstr "KterĂœ protokol chcete pouĆŸĂ­t?"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup the system files before:"
-msgstr "ZĂĄlohovat systĂ©movĂ© soubory pƙed:"
+msgid "Restore Progress"
+msgstr "PrƯběh obnovení"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Seznam uĆŸivatelĆŻ pro obnovenĂ­ (od kaĆŸdĂ©ho bude obnovena pouze poslednĂ­ "
-"zĂĄloha)"
+msgid "Estonia"
+msgstr "Estonsko"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "OK to restore the other files."
-msgstr "Obnovit také ostatní soubory."
+msgid "Choose the host on which the local scanners should be made available:"
+msgstr "Zvolte počítač, na kterĂ©m budou pƙístupnĂ© lokĂĄlnĂ­ skenery:"
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
#, c-format
-msgid " Restore Configuration "
-msgstr " Obnovit nastavenĂ­ "
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
+msgstr ""
+"Ve tabulce diskovĂœch oddĂ­lĆŻ je mezera, ale nemohu ji pouĆŸĂ­t.\n"
+"JedinĂ© ƙeĆĄenĂ­ je pƙesunout primĂĄrnĂ­ oddĂ­ly tak, abyste měli mezeru vedle\n"
+"rozơíƙenĂœch oddĂ­lĆŻ."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " Successfuly Restored on %s "
-msgstr " Ășspěơně obnovena na %s "
+msgid "Channel"
+msgstr "KanĂĄl"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid " All of your selected data have been "
-msgstr " VĆĄechna vybranĂĄ data byla "
+msgid "Add"
+msgstr "Pƙidat"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Backup files are corrupted"
-msgstr "ZĂĄloĆŸnĂ­ soubory jsou poĆĄkozenĂ©"
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "NenĂ­ nastaveno ĆŸĂĄdnĂ© sdĂ­lenĂ­ InternetovĂ©ho pƙipojenĂ­."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Zruơte tuto volbu pƙi dalơím spuơtění."
+msgid " Error while sending mail. \n"
+msgstr " Chyba pƙi posílání poơty. \n"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
+#, c-format
+msgid "Keyboard"
+msgstr "KlĂĄvesnice"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"List of data corrupted:\n"
-"\n"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-"Seznam poĆĄkozenĂœch dat:\n"
-"\n"
+"VloĆŸte CD s označenĂ­m %s do CD\n"
+" mechaniky do pƙípojnĂ©ho bodu /mnt/cdrom"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"List of data to restore:\n"
-"\n"
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
msgstr ""
-"Seznam dat pro obnovenĂ­:\n"
-"\n"
+"Intenzita mĂĄ povolenĂ© pƙípony k, M nebo G (napƙ. \"11M\" nebo 11M) nebo "
+"pƙidejte dostatečnĂœ počet '0' (nul)."
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Pro prvnĂ­ spuĆĄtěnĂ­ pouĆŸijte PrĆŻvodce nebo RozơíƙenĂ©.\n"
+msgid "Choose the connection you want to configure"
+msgstr "Zvolte si pƙipojenĂ­, kterĂ© chcete nastavit"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "\t-Network by webdav.\n"
-msgstr "\t-Sítí pƙes WebDAV.\n"
+msgid "Please wait, setting security level..."
+msgstr "Čekejte prosĂ­m, nastavuji Ășroveƈ zabezpečenĂ­..."
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t-Sítí pƙes rsync.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
+msgstr "Distribuce Mandrake Linux 9.1 je nejlepĆĄĂ­ vĂœvojovĂĄ platforma."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Sítí pƙes SSH.\n"
+msgid "Configuring network device %s"
+msgstr "Nastavuji sĂ­Ć„ovĂ© zaƙízenĂ­ %s"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Sítí pƙes FTP.\n"
+msgid "activated"
+msgstr "aktivovĂĄno"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "\t-Tape \n"
-msgstr "\t-PĂĄska \n"
+msgid "Please choose which network interface will be used for the dhcp server."
+msgstr "Vyberte si prosĂ­m, kterĂœ sĂ­Ć„ovĂœ adaptĂ©r chcete pouĆŸĂ­t pro dhcp server."
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
+msgid "Finding packages to upgrade..."
+msgstr "Vyhledávám balíčky pro aktualizaci"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t-PevnĂœ disk.\n"
+msgid "Mount point: "
+msgstr "Adresáƙ pƙipojení (mount point): "
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
-msgstr ""
-"\n"
-"- DĂ©mon (%s) zahrnuje :\n"
+msgid "parse all fonts"
+msgstr "zpracovĂĄvĂĄm vĆĄechny fonty"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tZĂĄlohovĂĄnĂ­ pouĆŸĂ­vĂĄ tar a gzip\n"
+msgid "With X"
+msgstr "X prostƙedí"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tZĂĄlohovĂĄnĂ­ pouĆŸĂ­vĂĄ tar a bzip2\n"
+msgid "Multi-head configuration"
+msgstr "Konfigurace dvou monitorĆŻ"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "\tDo not include System Files\n"
-msgstr "\tNezahrnout systémové soubory\n"
+msgid "No browser available! Please install one"
+msgstr "NenĂ­ k dispozici ĆŸĂĄdnĂœ prohlĂ­ĆŸeč! ProsĂ­m nainstalujte nějakĂœ."
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
"\n"
-"- Options:\n"
+"%s"
msgstr ""
+"Zachovat změny?\n"
+"AktuĂĄlnĂ­ konfigurace je:\n"
"\n"
-"- Volby:\n"
+"%s"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t uĆŸivatelskĂ© jmĂ©no: %s\n"
-"\t\t cesta: %s \n"
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "NemĆŻĆŸete pouĆŸĂ­t ReiserFS pro oddĂ­l menĆĄĂ­ neĆŸ 32MB"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"- Save via %s on host: %s\n"
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
-"\n"
-"- UloĆŸit skrze %s na počítač: %s\n"
+"Protokol rwho umoĆŸĆˆuje vzdĂĄlenĂœm uĆŸivatelĆŻm zĂ­skat seznam\n"
+"vĆĄech uĆŸivatelĆŻ pƙihlĂĄĆĄenĂœch na počítači s dĂ©monem rwho (je to podobnĂ©\n"
+"sluĆŸbě finger)."
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "\t\tErase=%s"
-msgstr "\t\tErase=%s"
+msgid "Domain name"
+msgstr "Jméno domény"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-"\n"
-"- UloĆŸit na pĂĄsku na zaƙízenĂ­: %s"
+msgid "Sharing of local printers"
+msgstr "SdĂ­lenĂ­ lokĂĄlnĂ­ch tiskĂĄren"
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
#, c-format
-msgid " (multi-session)"
-msgstr " (multi-session)"
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgstr "http://www.mandrakelinux.com/en/91errata.php3"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on device: %s"
-msgstr " na zaƙízení: %s"
+msgid "Available printers"
+msgstr "Dostupné tiskårny"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "RW"
-msgstr "RW"
+msgid "Empty"
+msgstr "PrĂĄzdnĂœ"
-#: ../../standalone/drakbackup:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
-"- Burn to CD"
-msgstr ""
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
"\n"
-"- VypĂĄlit na CD"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
"\n"
-"- Smazat pomocné tar soubory po provedení zålohy.\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
"\n"
-"- UloĆŸit na pevnĂœ disk do adresáƙe: %s\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+"Monitor\n"
"\n"
-"- Other Files:\n"
-msgstr ""
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
"\n"
-"- DalĆĄĂ­ soubory:\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- User Files:\n"
+"\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
+"X (X Window System) je srdcem grafického rozhraní pro GNU/Linux, které\n"
+"vyuĆŸĂ­vajĂ­ dodĂĄvanĂ© grafickĂ© prostƙedĂ­ (KDE, GNOME, AfterStep, WindowMaker).\n"
"\n"
-"- Soubory uĆŸivatelĆŻ:\n"
+"NynĂ­ bude zobrazen seznam rĆŻznĂœch parametrĆŻ, kterĂ© je moĆŸnĂ© změnit pro\n"
+"dosaĆŸenĂ­ optimĂĄlnĂ­ho grafickĂ©ho zobrazenĂ­\n"
+"GrafickĂĄ karta\n"
+"\n"
+" Instalační program je schopen automaticky detekovat a nastavit grafickou\n"
+"kartu instalovanou v počítači. Pokud se to nepodaƙí, mĂĄte moĆŸnost si ze\n"
+"seznamu vybrat pƙísluơnou grafickou kartu ručně.\n"
+"\n"
+" V pƙípadě, ĆŸe pro vaĆĄi kartu je moĆŸnĂ© pouĆŸĂ­t vĂ­ce rĆŻznĂœch serverĆŻ, s 3D\n"
+"akceleracĂ­ nebo bez, je pouze na vĂĄs, kterĂœ server si vyberete jako nejvĂ­ce\n"
+"vyhovující vaơim potƙebám.\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+" InstalačnĂ­ program dokĂĄĆŸe větĆĄinou automaticky detekovat a sprĂĄvně \n"
+"nastavit monitor pƙipojenĂœ k vaĆĄemu počítači. Pokud se to nezdaƙí, lze se\n"
+"seznamu vybrat monitor, kterĂœ mĂĄte.\n"
+"\n"
+"\n"
+"RozliĆĄenĂ­\n"
+"\n"
+" Zde si mĆŻĆŸete vybrat rozliĆĄenĂ­ a barevnou hloubku, kterĂ© vaĆĄe karta \n"
+"podporuje. Vyberte si to co vĂĄm nejvĂ­ce vyhovuje (vĂœběr lze po instalaci\n"
+"samozƙejmě změnit). Na monitoru bude zobrazena pƙíklad nastavení.\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" SystĂ©m se pokusĂ­ otestovat grafickou obrazovku v poĆŸadovanĂ©m rozliĆĄenĂ­.\n"
+"Pokud během testu uvidíte zprávy a odpovíte na ni \"Ano\", instalační "
+"program\n"
+"bude pokračovat dalĆĄĂ­m krokem. Pokud zprĂĄvu neuvidĂ­te, znamenĂĄ to, ĆŸe "
+"některá\n"
+"část automatickĂ© detekce neproběhla v poƙádku a test automaticky za 12 "
+"vteƙin\n"
+"skončí s tĂ­m, ĆŸe se provede nĂĄvrat k zĂĄkladnĂ­ nabĂ­dce. NĂĄsledně je moĆŸnĂ© "
+"opět\n"
+"provĂ©st změny aĆŸ do tĂ© doby, neĆŸ bude zobrazeno sprĂĄvnĂ© rozliĆĄenĂ­.\n"
+"\n"
+"\n"
+"Volby\n"
+"\n"
+" Zde si mĆŻĆŸete vybrat, zda chcete provĂ©st automatickĂœ start grafickĂ©ho\n"
+"prostƙedĂ­ po spuĆĄtěnĂ­ systĂ©mu. Je samozƙejmĂ©, ĆŸe pokud bude počítač "
+"provozovĂĄn\n"
+"jako server, je nutnĂ© odpovědět \"Ne\"."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "text width"
+msgstr "ơíƙka textu"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount device %s?"
+msgstr "Kam chcete pƙipojit zaƙízení %s?"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The default lease (in seconds)"
+msgstr "VĂœchozĂ­ doba pronĂĄjmu (sekundy)"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Interface \"%s\""
+msgstr "RozhranĂ­ \"%s\""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "With basic documentation (recommended!)"
+msgstr "Základní dokumentace (doporučeno!)"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "1 button"
+msgstr "1 tlačítko"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"- System Files:\n"
+"There are %d unknown printers directly connected to your system"
msgstr ""
"\n"
-"- Systémové soubory:\n"
+"NaĆĄel jsem %d neznĂĄmĂœch tiskĂĄren pƙímo pƙipojenĂœch k vaĆĄemu počítači"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
+#, c-format
+msgid "Test"
+msgstr "Test"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"Backup Sources: \n"
+"Allow/Forbid direct root login."
msgstr ""
+"Argumenty: (arg)\n"
"\n"
-"Zdroje pro zĂĄlohu:\n"
+"PovolĂ­/ZakĂĄĆŸe pƙímĂ© pƙihlĂĄĆĄenĂ­ uĆŸivatele root."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select user manually"
-msgstr "Vybrat uĆŸivatele manuĂĄlně"
+msgid "Korea"
+msgstr "Korea"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Backup Users"
-msgstr "ZĂĄlohovat uĆŸivatele"
+msgid "Your choice? (default `%s'%s) "
+msgstr "VaĆĄe volba? (vĂœchozĂ­ '%s'%s) "
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Backup system"
-msgstr "Zålohovat systém"
+msgid "Raw printer"
+msgstr "PƙímĂœ tisk na tiskĂĄrnu"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "ProsĂ­m vyberte si, co chcete zĂĄlohovat"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "official vendor name of the cpu"
+msgstr "Oficiålní jméno dodavatele procesoru"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "on Tape Device"
-msgstr "na pĂĄsku"
+msgid "Vendor"
+msgstr "Dodavatel"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "on CDROM"
-msgstr "na CDROM"
+msgid "Interface %s"
+msgstr "RozhranĂ­ %s"
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "across Network"
-msgstr "pƙes sĂ­Ć„"
+msgid "Configure mouse"
+msgstr "NastavenĂ­ myĆĄi"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "on Hard Drive"
-msgstr "na pevnĂœ disk"
+msgid "Choose the mount points"
+msgstr "Zvolte si pƙípojnĂ©(mount) body"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Please choose where you want to backup"
-msgstr "Vyberte si, prosĂ­m, kam chcete zĂĄlohovat."
+msgid "OK"
+msgstr "OK"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "More Options"
-msgstr "DalĆĄĂ­ volby"
+msgid "Yugoslavian (latin)"
+msgstr "Jugoslåvské (latin)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "When"
-msgstr "Kdy"
+msgid "Installing"
+msgstr "Instaluji"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Where"
-msgstr "Kde"
+msgid "Launch userdrake"
+msgstr "Spustit UserDrake"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "What"
-msgstr "Co"
+msgid "Is this an install or an upgrade?"
+msgstr "Je to instalace nebo aktualizace?"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr "Smazat pomocné tar soubory po zåloze na jiné médium."
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "ISDN card"
+msgstr "InternĂ­ ISDN karta"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Send mail report after each backup to:"
-msgstr "Poslat report po zĂĄloze mailem na :"
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
+msgstr ""
+"Chcete-li sdĂ­let svĂ© vědomosti a pomĂĄhat vytváƙet nĂĄstroje pro Linux, "
+"pƙipojte se do diskusnĂ­ch klubĆŻ, kterĂ© najdete na naĆĄich strĂĄnkĂĄch "
+"\"Community\""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
"\n"
-"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-"Ujistěte se prosĂ­m, ĆŸe mezi sluĆŸbami je pƙítomen cron dĂ©mon.\n"
+"Gratulujeme, konfigurace sítě a internetu je ukončena.\n"
"\n"
-"V tuto chvĂ­li takĂ© vĆĄechna 'sĂ­Ć„ovĂĄ' mĂ©dia pouĆŸĂ­vajĂ­ pevnĂœ disk."
+"Konfigurace bude nynĂ­ aktivovĂĄna.\n"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "\t-Hard drive.\n"
+msgstr "\t-PevnĂœ disk.\n"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Please choose the\n"
-"media for backup."
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
+"\n"
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
-"ProsĂ­m zvolte si\n"
-"médium pro zålohy."
+"Tento krok je objeví pouze tehdy, pokud je na vaơem počítači nalezen starơí\n"
+"oddĂ­l GNU/Linuxu.\n"
+"\n"
+"InstalačnĂ­ program potƙebuje vědět, zda mĂĄ provĂ©st instalaci nebo pouze\n"
+"aktualizaci existujícího systému Mandrake Linux.\n"
+"\n"
+" * \"Instalace\": NejbÄ›ĆŸnějĆĄĂ­ volba, provede kompletnĂ­ vĂœmaz starĂ©ho "
+"systému.\n"
+"Pokud si pƙejete změnit rozmĂ­stěnĂ­ oddĂ­lĆŻ, změnit souborovĂœ systĂ©m, "
+"pouĆŸijte\n"
+"tuto volbu. MĆŻĆŸete samozƙejmě takĂ© některĂ© oddĂ­ly zachovat pƙed pƙepsĂĄnĂ­m.\n"
+"\n"
+" * \"Aktualizace\": tato volba provede aktualizaci instalovanĂœch balíčkĆŻ.\n"
+"AktuĂĄlnĂ­ rozmĂ­stěnĂ­ diskovĂœch oddĂ­lĆŻ a uĆŸivatelskĂĄ data zĆŻstanou zachovĂĄna.\n"
+"Bude provedena ale větơina konfiguračních krokƯ, stejně jako pƙi instalaci.\n"
+"\n"
+"PouĆŸitĂ­ volby \"Aktualizace\" bude fungovat bez problĂ©mĆŻ na stĂĄvajĂ­cĂ­ "
+"verzi \n"
+"\"8.1\" a novějĆĄĂ­. Aktualizace na verzĂ­ch starĆĄĂ­ch neĆŸ \"8.1\" nenĂ­ "
+"doporučováno."
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
+#, c-format
+msgid "Printer on remote CUPS server"
+msgstr "Tiskårna na vzdåleném CUPS serveru"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the time \n"
-"interval between each backup"
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
msgstr ""
-"Vyberte si interval mezi\n"
-"jednotlivĂœmi zĂĄlohami"
+"Odebrání tiskárny \"%s\" ze Star Office/OpenOffice.org/GIMP se nezdaƙilo."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Use daemon"
-msgstr "PouĆŸĂ­t dĂ©mona"
+msgid "delete"
+msgstr "smazat"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "monthly"
-msgstr "kaĆŸdĂœ měsĂ­c"
+msgid "here if no."
+msgstr "zde pokud si nejste jisti."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "weekly"
-msgstr "kaĆŸdĂœ tĂœden"
+msgid "DHCP host name"
+msgstr "Název počítače z DHCP"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "daily"
-msgstr "kaĆŸdĂœ den"
+msgid "The maximum lease (in seconds)"
+msgstr "MaximĂĄlnĂ­ doba pronĂĄjmu (sekundy)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "hourly"
-msgstr "kaĆŸdou hodinu"
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "Ke kterĂ©mu sĂ©riovĂ©mu portu je pƙipojena vaĆĄe myĆĄ?"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "HardDrive / NFS"
-msgstr "PevnĂœ disk / NFS"
+msgid "Did it work properly?"
+msgstr "Proběhl tisk správně ?"
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
#, c-format
-msgid "CDROM / DVDROM"
-msgstr "CD-ROM / DVD-ROM"
+msgid "Poor"
+msgstr "SlabĂĄ"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please enter the directory to save to:"
-msgstr "Zadejte adresáƙ, kam se bude ukládat:"
+msgid "The DHCP start range"
+msgstr "Počátek pásma adres DHCP"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr ""
-"Pokud chcete po zálohování pásku automaticky vysunout, prosím zatrhněte."
+msgid "Grenada"
+msgstr "Grenada"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr ""
-"Pokud chcete pƙed zálohováním vaơi pásku nejdƙíve smazat, prosím zatrhněte"
+msgid "Unsafe"
+msgstr "NejistĂœ"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please check if you want to use the non-rewinding device."
+msgid ", %s sectors"
+msgstr ", %s sektorĆŻ"
+
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "No"
+msgstr "Ne"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
msgstr ""
-"Pokud chcete pouĆŸĂ­vat zaƙízenĂ­ bez zpětnĂ©ho pƙevĂ­jenĂ­, prosĂ­m zatrhněte."
+"Je vaơe tiskárna multifunkční zaƙízení od HP nebo od Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 se skenerem, Sony IJP-V100) nebo HP "
+"PhotoSmart či HP LaserJet 2200?"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the device name to use for backup"
-msgstr "Zadejte nĂĄzev zaƙízenĂ­, na kterĂ© se bude zĂĄlohovat"
+msgid "Guadeloupe"
+msgstr "Guadeloupe"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Use tape to backup"
-msgstr "PouĆŸĂ­t pĂĄskovou jednotku"
+msgid "could not find any font.\n"
+msgstr "nelze nalĂ©zt ĆŸĂĄdnĂœ font.\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "No CD device defined!"
-msgstr "NenĂ­ definovĂĄno ĆŸĂĄdnĂ© zaƙízenĂ­ CD!"
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "Chcete, aby se klĂĄvesa Backspace chovala v konzoli jako Delete?"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Zadejte název vaơí vypalovačky CD\n"
-" napƙ.: 1,0,0"
+msgid "Vertical refresh rate"
+msgstr "VertikĂĄlnĂ­(obrazovkovĂĄ) synchronizace"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
#, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "Zvolte pokud pouĆŸĂ­vĂĄte zaƙízenĂ­ DVD-RAM"
+msgid "Entering step `%s'\n"
+msgstr "Začínám '%s'\n"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "Zvolte pokud pouĆŸĂ­vĂĄte zaƙízenĂ­ DVDR"
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " Erase Now "
-msgstr " Vymazat nynĂ­ "
+msgid "Removing %s ..."
+msgstr "Odstraƈuji %s ..."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "Zatrhněte, pokud chcete vaĆĄe CDRW mĂ©dium smazat (pƙi prvnĂ­m sezenĂ­)"
+msgid "Niger"
+msgstr "Niger"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "Zvolte pokud pouĆŸĂ­vĂĄte CDRW mĂ©dia"
+msgid "No printer"
+msgstr "Bez tiskĂĄrny"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Please check for multisession CD"
-msgstr "Zvolte pokud pouĆŸĂ­vĂĄte multisession CD"
+msgid "alert configuration"
+msgstr "nastavenĂ­ varovĂĄnĂ­"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "Vyberte velikost vaƥeho média CD/DVD"
+msgid "NetWare Printer Options"
+msgstr "MoĆŸnosti NetWare tiskĂĄrny"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
-msgstr ""
-"Vyberte prosĂ­m svĂ© zaƙízenĂ­ CD/DVD.\n"
-"(Stisknutím klávesy Enter pƙenesete nastavení do ostatních polí.\n"
-"Toto políčko nenĂ­ povinnĂ©, je to pouze nĂĄstroj pro vyplněnĂ­ formuláƙe.)"
+msgid "%s BootSplash (%s) preview"
+msgstr "Nåhled tématu Bootsplash %s (%s)"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Use CD/DVDROM to backup"
-msgstr "PouĆŸĂ­t pro zĂĄlohovĂĄnĂ­ CD/DVD-ROM"
+msgid "General"
+msgstr "Obecné"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Need hostname, username and password!"
-msgstr "Potƙebuji nĂĄzev počítače, uĆŸivatelskĂ© jmĂ©no a heslo!"
+msgid "Printing system: "
+msgstr "TiskovĂœ systĂ©m: "
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Remember this password"
-msgstr "Pamatovat si heslo"
+msgid "Add a user"
+msgstr "PƙidĂĄnĂ­ uĆŸivatele"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please enter your password"
-msgstr "Zadejte své heslo"
+msgid "Network configuration (%d adapters)"
+msgstr "NastavenĂ­ sĂ­tě (%d adaptĂ©ry(ĆŻ))"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "Please enter your login"
-msgstr "Zadejte svĂ© pƙihlaĆĄovacĂ­ jmĂ©no"
+msgid "Mandatory package %s is missing"
+msgstr "ChybĂ­ potƙebnĂœ balíček %s"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
-msgstr ""
-"ProsĂ­m, zadejte adresáƙ (nebo modul), do kterĂ©ho\n"
-" bude umístěna záloha na tomto počítači."
+msgid "Philippines"
+msgstr "FilipĂ­ny"
-#: ../../standalone/drakbackup:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
#, c-format
-msgid "Please enter the host name or IP."
-msgstr "Zadejte prosím název počítače nebo IP."
+msgid "Ok"
+msgstr "Ok"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
-msgstr ""
-"Jiné (ne pro drakbackup)\n"
-"klíče jsou jiĆŸ na mĂ­stě"
+msgid "Print Queue Name"
+msgstr "Nåzev tiskové fronty"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "Chcete pouĆŸĂ­t aboot?"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "BěloruskĂ©"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-" Transfer \n"
-"Now"
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
msgstr ""
-" Pƙenos \n"
-"NynĂ­"
+"PDQ podporuje pouze místní tiskårny, vzdålené tiskårny LPD a tisk na "
+"tiskárny pƙes sokety/TCP.\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Move files to the new partition"
+msgstr "Pƙesunout soubory na novĂœ diskovĂœ oddĂ­l"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
msgstr ""
-"Vytvoƙit/PƙenĂ©st\n"
-"zĂĄloĆŸnĂ­ klíče pro SSH"
+"Pƙidejte sem ty CUPS servery, ze kterĂœch budete chtĂ­t vyuĆŸĂ­vat tiskĂĄrny. Je "
+"to nutnĂ© pouze v pƙípadě, ĆŸe tyto servery neơíƙí informace informace o "
+"tiskĂĄrnĂĄch v lokĂĄlnĂ­ sĂ­ti."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use Expect for SSH"
-msgstr "PouĆŸĂ­t Expect pro SSH"
+msgid "Restore From Catalog"
+msgstr "Obnovit z katalogu"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Net Method:"
-msgstr "SĂ­Ć„ovĂĄ metoda:"
+msgid "Pitcairn"
+msgstr "Pitcairn"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use network connection to backup"
-msgstr "PouĆŸĂ­t sĂ­Ć„ovĂ© pƙipojenĂ­ pro zĂĄlohovĂĄnĂ­"
+msgid "IDE"
+msgstr "IDE"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Users"
-msgstr "UĆŸivatelĂ©"
+msgid "group :"
+msgstr "skupina :"
-#: ../../standalone/drakbackup:1
+#: ../../fs.pm:1
#, c-format
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
+msgid "mounting partition %s in directory %s failed"
+msgstr "pƙipojení oddílu %s v adresáƙi %s selhalo"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr "PouĆŸĂ­t pƙírĆŻstkovou zĂĄlohu (nepƙepisovat starĆĄĂ­ zĂĄlohy)"
+msgid "Lilo screen"
+msgstr "Obrazovka LiLo"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid "Remove Selected"
-msgstr "Odstranit vybrané"
+msgid "LILO with graphical menu"
+msgstr "LILO s grafickou nabĂ­dkou"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Do not include the browser cache"
-msgstr "Nezahrnout cache prohlĂ­ĆŸeče"
+msgid "Estimating"
+msgstr "Odhaduji"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "Zvolte prosĂ­m vĆĄechny uĆŸivatele, kterĂ© chcete zĂĄlohovat."
+msgid "You can't unselect this package. It is already installed"
+msgstr "NemĆŻĆŸete od-označit tento balíček, protoĆŸe je uĆŸ nainstalovanĂœ"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr "Tato volba dovolĂ­ obnovit rĆŻznĂ© verze adresáƙe /etc."
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr ", tiskĂĄrna \"%s\" na SMB/Windows serveru \"%s\""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Nezahrnout kritické soubory (passwd, group, fstab)"
+msgid "Go on anyway?"
+msgstr "Pƙesto pokračovat?"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use incremental backup (do not replace old backups)"
-msgstr "PouĆŸĂ­t pƙírĆŻstkovou zĂĄlohu (nepƙepisovat starĆĄĂ­ zĂĄlohy)"
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "HledĂĄm dostupnĂ© balíčky a znovu sestavuji databĂĄzi balíčkĆŻ..."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "ZĂĄlohovat vaĆĄe systĂ©movĂ© soubory. (adresáƙ /etc)"
+msgid "Does not appear to be recordable media!"
+msgstr "Toto není zapisovatelné médium"
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr "Tato volba zazálohuje a obnoví vơechny soubory v adresáƙi /etc.\n"
+msgid "Specify options"
+msgstr "Zadejte moĆŸnosti"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Vanuatu"
+msgstr "Vanuatu"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Either the server name or the server's IP must be given!"
+msgstr "MusĂ­ bĂœt zadĂĄn buď nĂĄzev serveru nebo jeho IP adresa!"
+
+#: ../../any.pm:1
#, c-format
msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
"\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
msgstr ""
+"PomocĂ­ startovacĂ­ diskety je moĆŸnĂ© spustit systĂ©m Linux bez zĂĄvislosti na\n"
+"zavaděči systĂ©mu. To je uĆŸitečnĂ© tƙeba v pƙípadě, ĆŸe nechcete instalovat "
+"SILO\n"
+"na počítač, nebo jinĂœ operačnĂ­ systĂ©m SILO pƙepsal nebo SILO nepracuje "
+"správně\n"
+"s hardwarovou konfiguracĂ­. VlastnĂ­ startovacĂ­ disketa je takĂ© uĆŸitečnĂĄ "
+"tehdy,\n"
+"pokud je potƙeba provĂ©st opravu systĂ©mu po pƙedchozĂ­m selhĂĄnĂ­.\n"
"\n"
-"Zvolte prosĂ­m vĆĄechny volby, kterĂ© potƙebujete.\n"
+"Pokud chcete vytvoƙit startovacĂ­ disketu, vloĆŸte disketu do mechaniky\n"
+"a stiskněte \"OK\"."
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Vyberte soubory nebo adresáƙe a klepněte na 'Pƙidat'"
+msgid "You can't use an encrypted file system for mount point %s"
+msgstr "Nelze pouĆŸĂ­t kryptovanĂœ souborovĂœ systĂ©m na pƙipojenĂœ bod %s"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "File Selection"
-msgstr "VĂœběr souboru"
+msgid "Norfolk Island"
+msgstr "Norfolk Island"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Can't create catalog!"
-msgstr "Nelze vytvoƙit katalog!"
+msgid "Theme installation failed!"
+msgstr "Instalace témata selhala!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid " Error while sending mail. \n"
-msgstr " Chyba pƙi posílání poơty. \n"
+msgid "Nothing to do"
+msgstr "Nic nedělat"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
-"\n"
-"Aktivity programu DrakBackup skrze pĂĄsku:\n"
-"\n"
+msgid "Use for loopback"
+msgstr "PouĆŸĂ­t loopback"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
-"\n"
-"Aktivity programu DrakBackup skrze CD:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
+msgstr "Nástroj společnosti Mandrake pro hláơení chyb"
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
-"\n"
-"Aktivity programu DrakBackup skrze %s:\n"
-"\n"
+msgid "use pppoe"
+msgstr "pouĆŸĂ­t pppoe"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving files to the new partition"
+msgstr "Pƙesunuji soubory na novĂœ diskovĂœ oddĂ­l"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s s EXPERIMENTÁLNÍ 3D hardwarovou akcelerací"
+
+#: ../../help.pm:1 ../../interactive.pm:1
+#, c-format
+msgid "Advanced"
+msgstr "Rozơíƙení"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transfer"
+msgstr "PƙenĂ©st"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak (Swedish)"
+msgstr "Dvoƙák (Ć vĂ©dskĂ©) "
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-" ProblĂ©my FTP spojenĂ­: Nebylo moĆŸnĂ© poslat vaĆĄe soubory se zĂĄlohou pƙes "
-"FTP.\n"
+msgid "More Options"
+msgstr "DalĆĄĂ­ volby"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Afghanistan"
+msgstr "AfghĂĄnistĂĄn"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Delete Hard Drive tar files after backup to other media."
+msgstr "Smazat pomocné tar soubory po zåloze na jiné médium."
+
+#: ../../services.pm:1
+#, c-format
msgid ""
-"file list sent by FTP: %s\n"
-" "
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
msgstr ""
-"seznam souborĆŻ poslanĂœ pƙes FTP: %s\n"
-" "
+"cron je standardnĂ­ UnixovĂœ program kterĂœ spouĆĄtĂ­ uĆŸivatelem zadanĂ© programy\n"
+"v pƙedem definovanĂœch intervalech. vixie cron mĂĄ navĂ­c mnoho vlastnostĂ­,\n"
+"včetně vyĆĄĆĄĂ­ bezpečnosti a vĂ­ce moĆŸnostĂ­ nastavenĂ­."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "No changes to backup!"
-msgstr "Nejsou ĆŸĂĄdnĂ© změny pro zĂĄlohovĂĄnĂ­!"
+msgid "Burundi"
+msgstr "Burundi"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Hard Disk Backup files..."
-msgstr "ZĂĄloĆŸnĂ­ soubory pevnĂ©ho disku..."
+msgid "Add Client -->"
+msgstr "Pƙidat klienta -->"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Backup Other files..."
-msgstr "ZĂĄlohovat dalĆĄĂ­ soubory..."
+msgid "Read carefully!"
+msgstr "Čtěte pozorně!"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "PrĆŻběh zĂĄlohovĂĄnĂ­ na pevnĂœ disk... "
+msgid "RW"
+msgstr "RW"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Backup User files..."
-msgstr "ZĂĄlohovat soubory uĆŸivatelĆŻ..."
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
+msgstr ""
+"Zadejte prosĂ­m\n"
+"typ TV normy a zemi"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Backup system files..."
-msgstr "Zålohovat systémové soubory..."
+msgid "Port"
+msgstr "Port"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "No tape in %s!"
-msgstr "NenĂ­ pĂĄska v %s!"
+msgid "No (experts only)"
+msgstr "Ne (pouze pro experty)"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Permission problem accessing CD."
-msgstr "ProblĂ©my s prĂĄvy pƙi pƙístupu na CD."
+msgid "No kernel selected!"
+msgstr "Nebylo zvoleno ĆŸĂĄdnĂ© jĂĄdro!"
-#: ../../standalone/drakbackup:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "This may take a moment to erase the media."
-msgstr "VymazĂĄnĂ­ mĂ©dia mĆŻĆŸe chvĂ­li trvat."
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Stisknete ENTER pro start vybraného OS, 'e' pro upravu"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Not erasable media!"
-msgstr "Toto nenĂ­ pƙepisovatelnĂ© mĂ©dium!"
+msgid "Set-GID"
+msgstr "Set-GID"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr "Toto není zapisovatelné médium"
+msgid "The encryption keys do not match"
+msgstr "Ơifrovací klíče se neshodují"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No CDR/DVDR in drive!"
-msgstr "V mechanice není CDR/DVDR médium."
+msgid "Right \"Windows\" key"
+msgstr "PravĂĄ klĂĄvesa \"Windows\""
#: ../../standalone/drakbackup:1
#, c-format
-msgid "WebDAV transfer failed!"
-msgstr "Pƙenos protokolem WebDAV selhal!"
+msgid "CDROM / DVDROM"
+msgstr "CD-ROM / DVD-ROM"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "WebDAV remote site already in sync!"
-msgstr "VzdĂĄlenĂĄ mĂ­sto je jiĆŸ protokolem WebDAV synchronizovĂĄno!"
+msgid "if set to yes, check empty password in /etc/shadow."
+msgstr "pokud je nastaveno, kontroluje prĂĄzdnĂĄ hesla v /etc/shadow."
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Total progess"
-msgstr "CelkovĂœ prĆŻběh"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
+msgstr ""
+"PƙedtĂ­m, neĆŸ budete pokračovat, pƙečtěte si pozorně podmĂ­nky licence. Ty\n"
+"se vztahují k celé distribuci Mandrake Linux a pokud s nimi nesouhlasíte,\n"
+"klepněte na tlačítko \"Odmítnout\". Instalace ihned skončí. Pokud chcete "
+"pokračovat\n"
+"v instalaci, klepněte na tlačítko \"Pƙijmout\"."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
+"Here is a list of the available printing options for the current printer:\n"
"\n"
-"without being prompted for a password."
msgstr ""
-"Pƙenos ĂșspěơnĂœ!\n"
-"MoĆŸnĂĄ budete chtĂ­t zkontrolovat, zda se mĆŻĆŸete pƙihlĂĄsit na server:\n"
+"Zde je seznam dostupnĂœch voleb pro nastavenĂ­ tisku pro aktuĂĄlnĂ­ tiskĂĄrnu:\n"
"\n"
-"ssh -i %s %s\\@%s\n"
+
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolutions"
+msgstr "RozliĆĄenĂ­"
+
+#: ../../network/drakfirewall.pm:1
+#, c-format
+msgid ""
+"drakfirewall configurator\n"
"\n"
-"bez dotazu na heslo."
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
+msgstr ""
+"NastavenĂ­ aplikace drakfirewall\n"
+"\n"
+"Zde je moĆŸnĂ© nastavit osobnĂ­ firewall pro tento systĂ©m Mandrake Linux.\n"
+"Pro vĂœkonnĂ© ƙeĆĄenĂ­ vyhrazenĂ©ho firewallu pouĆŸijte specializovanou\n"
+"distribuci MandrakeSecurity Firewall."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "%s not responding"
-msgstr "%s neodpovĂ­dĂĄ"
+msgid ""
+"Please enter your username, password and domain name to access this host."
+msgstr ""
+"ProsĂ­m zadejte svĂ© uĆŸivatelskĂ© jmĂ©no, heslo a nĂĄzev domĂ©ny, pod kterĂœmi "
+"chcete pƙistupovat k tomuto počítači."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Can't find %s on %s"
-msgstr "Nelze nalézt %s na %s"
+msgid "Remove selected host"
+msgstr "Odstranit vybranĂœ počítač"
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr "Povolení odepƙeno pƙi pƙenosu %s na %s"
+msgid "Network configuration"
+msgstr "Nastavení sítě"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Bad password on %s"
-msgstr "Chybné heslo na %s"
+msgid "No sharing"
+msgstr "NesdĂ­let"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr "ĆœĂĄdnĂĄ vĂœzva na heslo na %s na portu %s"
+msgid "Move selected rule down one level"
+msgstr "Posunout vybranĂ© pravidlo o Ășroveƈ nĂ­ĆŸe"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "ERROR: Cannot spawn %s."
-msgstr "CHYBA: Nelze spustit pƙíkaz %s."
+msgid "TB"
+msgstr "TB"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr "GenerovĂĄnĂ­ klíčƯ mĆŻĆŸe chvĂ­li trvat."
+msgid "Please check if you are using a DVDR device"
+msgstr "Zvolte pokud pouĆŸĂ­vĂĄte zaƙízenĂ­ DVDR"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
-"%s existuje, smazat?\n"
-"\n"
-"VarovĂĄnĂ­: Pokud jste tak jiĆŸ jednou učinili, budete nejspĂ­ĆĄ muset\n"
-"vymazat pƙísluĆĄnĂœ zĂĄznam ze souboru authorized_keys na serveru."
+msgid "FATAL"
+msgstr "FATAL"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
"\n"
-" DrakBackup Report Details\n"
-"\n"
+"The network address is %s using a netmask of %s.\n"
"\n"
msgstr ""
+"DHCP server dovoluje dalĆĄĂ­m počítačƯm spuĆĄtěnĂ­ pomocĂ­ PXE s vyuĆŸitĂ­m danĂ©ho "
+"rozsahu adres.\n"
"\n"
-" Detaily o reportu pro DrackBackup\n"
-"\n"
+"SĂ­Ć„ovĂĄ adresa je %s a pouĆŸitĂĄ maska je %s\n"
"\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Delete"
+msgstr "Smazat"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"Allow/Forbid reboot by the console user."
msgstr ""
+"Argumenty: (arg)\n"
"\n"
-" Report démonu pro DrackBackup\n"
-"\n"
-"\n"
+"PovolĂ­/ZakĂĄĆŸe reboot s konsole provedenĂ© uĆŸivatelem."
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
msgstr ""
-"\n"
-" Report programu DrackBackup \n"
-"\n"
+"MĆŻĆŸu nastavit vĂĄĆĄ počítač tak, aby automaticky spustil X pƙi startu.\n"
+"Chcete aby počítač po zapnutĂ­ spustil grafickĂœ reĆŸim?"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "INFO"
-msgstr "INFO"
+msgid "Build the disk"
+msgstr "Vytvoƙit disk"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "FATAL"
-msgstr "FATAL"
+msgid "Disconnect %s"
+msgstr "Odpojit %s"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "WARNING"
-msgstr "VAROVÁNÍ"
+msgid "Status:"
+msgstr "Status:"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Cron not available yet as non-root"
-msgstr "SluĆŸby cronu nejsou zatĂ­m pro bÄ›ĆŸnĂ© uĆŸivatele dostupnĂ©."
+msgid "HTTP proxy"
+msgstr "HTTP proxy"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Instalace %s neuspěla. Stala se tato chyba:"
+msgid "SSH Server"
+msgstr "Server SSH"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No, I don't want autologin"
-msgstr "Ne, nechci automatickĂ© pƙihlĂĄĆĄenĂ­"
+msgid "\t-Network by rsync.\n"
+msgstr "\t-Sítí pƙes rsync.\n"
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ano, chci automatickĂ© pƙihlĂĄĆĄenĂ­ s tĂ­mto (uĆŸivatelem, desktopem)"
+msgid "European protocol"
+msgstr "EvropskĂœ protokol"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "Spustit grafickĂ© prostƙedĂ­ pƙi startu systĂ©mu"
+msgid ", printer \"%s\" on server \"%s\""
+msgstr ", tiskĂĄrna \"%s\" na serveru \"%s\""
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
#, c-format
-msgid "System mode"
-msgstr "SystĂ©movĂœ reĆŸim"
+msgid "Error"
+msgstr "Chyba"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Bootsplash"
-msgstr "Bootsplash"
+msgid "allow \"su\""
+msgstr "povolit \"su\""
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Lilo screen"
-msgstr "Obrazovka LiLo"
+msgid "Australia"
+msgstr "AustrĂĄlie"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
-"\n"
-"Vyberte téma pro\n"
-"LiLo a Bootsplash,\n"
-"mĆŻĆŸete je vybrat\n"
-"kaĆŸdĂ© zvlĂĄĆĄĆ„"
+msgid "please wait during ttmkfdir..."
+msgstr "čekejte prosĂ­m, prĂĄvě bÄ›ĆŸĂ­ ttmkfdir... "
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Themes"
-msgstr "TĂ©mata"
+msgid "Configure only card \"%s\"%s"
+msgstr "Konfigurovat pouze kartu \"%s\"%s"
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Splash selection"
-msgstr "VĂœběr zavĂĄděcĂ­ho obrĂĄzku"
+msgid "Level"
+msgstr "Úroveƈ"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Jako sprĂĄvce zavĂĄděnĂ­ nynĂ­ pouĆŸĂ­vĂĄte %s.\n"
-"Pokud chcete spustit prƯvodce nastavením, klepněte na Nastavit."
+msgid "Change the printing system"
+msgstr "Změna tiskovĂ©ho systĂ©mu"
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr "Instalace tĂ©mat pro LiLo a Bootsplash provedena Ășspěơně!"
+msgid ""
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
+msgstr ""
+"Våƥ systém podporuje zobrazení na dvou monitorech.\n"
+"Co chcete dělat?"
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
#, c-format
-msgid "Theme installation failed!"
-msgstr "Instalace témata selhala!"
+msgid "Configure services"
+msgstr "NastavenĂ­ sluĆŸeb"
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Notice"
-msgstr "PoznĂĄmka"
+msgid "Broadcast Address:"
+msgstr "Adresa broadcastu:"
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Relaunch 'lilo'"
-msgstr "Znovu spustit 'lilo'"
+msgid "mount failed: "
+msgstr "chyba pƙipojování: "
-#: ../../standalone/drakboot:1
-#, c-format
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
msgstr ""
-"Nelze znovu spustit LiLo!\n"
-"Chcete-li dokončit instalaci tĂ©matu pro LiLo, spusĆ„te na pƙíkazovĂ© ƙádce "
-"\"lilo\" jako uĆŸivatel root."
+"GNU/Linux jĂĄdro potƙebuje spustit vĂœpočetnĂ­ smyčku pƙi spuĆĄtěnĂ­ pro "
+"inicializaci čítače hodin. VĂœsledek je uloĆŸen v proměnnĂ© BogoMIPS jako "
+"takovĂœ \"benchmark\" pro cpu."
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
-msgstr "Provést initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+msgid "Image"
+msgstr "Obraz(image)"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr "Nelze spustit mkinitrd -f /boot/initrd-%s.img %s."
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"Pƙidání tiskárny \"%s\" do Star Office/OpenOffice.org/GIMP se nezdaƙilo."
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
+#, c-format
+msgid "Remote Administration"
+msgstr "VzdĂĄlenĂĄ administrace"
+
+#: ../../modules.pm:1
#, c-format
msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
msgstr ""
-"Nelze zapsat soubor /etc/sysconfig/bootsplash\n"
-"Soubor nebyl nalezen."
+"Podpora PCMCIA jiĆŸ nenĂ­ dostupnĂĄ pro kernely 2.2. PouĆŸijte prosĂ­m ƙadu 2.4."
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Write %s"
-msgstr "Zapsat %s"
+msgid "Selected All"
+msgstr "Vybrat vĆĄe"
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr "Nelze zapsat soubor /etc/sysconfig/bootsplash."
+msgid "CUPS - Common Unix Printing System"
+msgstr "CUPS - TiskovĂœ SystĂ©m pro Unix"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Lilo message not found"
-msgstr "ZprĂĄva LiLo nebyla nalezena"
+msgid "Webmin Service"
+msgstr "SluĆŸba Webmin"
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Copy %s to %s"
-msgstr "KopĂ­ruji %s do %s"
+msgid "device"
+msgstr "zaƙízení"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Backup %s to %s.old"
-msgstr "ZĂĄlohuji %s do %s.old"
+msgid "All"
+msgstr "VĆĄechno"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create new theme"
-msgstr "Vytvoƙit novĂ© tĂ©ma"
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "KterĂœ tiskovĂœ systĂ©m chcete pouĆŸĂ­t pro tisk?"
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"Zobrazit téma\n"
-"na konzoli"
+msgid "Greece"
+msgstr "Ƙecko"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Install themes"
-msgstr "Instalovat témata"
+msgid "An error occurred"
+msgstr "Stala se chyba"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Lilo/grub mode"
-msgstr "ReĆŸim Lilo/Grub"
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
+msgstr ""
+"Tento balíček musĂ­ bĂœt obnoven\n"
+"Jste si jisti, ĆŸe ho nechcete zvolit?"
-#: ../../standalone/drakboot:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Yaboot mode"
-msgstr "ReĆŸim Yaboot"
+msgid "Tamil (Typewriter-layout)"
+msgstr "Tamilské (psací stroj)"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "<control>Q"
-msgstr "<control>K"
+msgid "manual"
+msgstr "ručně"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/File/_Quit"
-msgstr "/Soubor/U_končit"
+msgid "Printer manufacturer, model, driver"
+msgstr "VĂœrobce tiskĂĄrny, model, ovladač"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "/_File"
-msgstr "/_Soubor"
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"V zaƙízenĂ­ %s nenĂ­ ĆŸĂĄdnĂ© mĂ©dium, nebo je mĂ©dium chrĂĄněno proti zĂĄpisu.\n"
+"VloĆŸte prosĂ­m nějakĂ©."
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Style Configuration"
-msgstr "Nastavení stylu zavádění"
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
+msgstr ""
+"Adresáƙ %s jiĆŸ obsahuje nějakĂĄ data\n"
+"(%s)"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "No browser available! Please install one"
-msgstr "NenĂ­ k dispozici ĆŸĂĄdnĂœ prohlĂ­ĆŸeč! ProsĂ­m nainstalujte nějakĂœ."
+msgid "Printer on NetWare server"
+msgstr "TiskĂĄrna na Netware serveru"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "connecting to Bugzilla wizard ..."
-msgstr "pƙipojuji se k prƯvodci Bugzilla ..."
+msgid "Give the ram size in MB"
+msgstr "Zadejte velikost paměti v MB"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Package not installed"
-msgstr "Balíček není nainstalován"
+msgid "Real name"
+msgstr "SkutečnĂ© jmĂ©no"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Not installed"
-msgstr "NenĂ­ instalovĂĄno"
+msgid "done"
+msgstr "hotovo"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Standalone Tools"
-msgstr "Samostatné nåstroje"
+msgid "Please uncheck or remove it on next time."
+msgstr "Zruơte tuto volbu pƙi dalơím spuơtění."
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Report"
-msgstr "HlĂĄĆĄenĂ­"
+msgid "Higher"
+msgstr "VysokĂĄ"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the partitions you want to format"
+msgstr "Zvolte diskové oddíly které chcete naformåtovat"
+
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
+"V počítači nebyla nalezena ĆŸĂĄdnĂĄ TV karta. Zkontrolujte prosĂ­m, zda "
+"podporovaná karta je správně zapojena.\n"
"\n"
"\n"
-"Chcete-li poslat hláơení o chybě, klepněte na tlačítko pro nahláơení chyby.\n"
-"Otevƙe se okno prohlĂ­ĆŸeče sĂ­tě Internet na adrese https://drakbug."
-"mandrakesoft.com,\n"
-"kde najdete formuláƙ k vyplněnĂ­. VĂœĆĄe zobrazenĂ© informace budou na tento "
-"server\n"
-"rovnÄ›ĆŸ pƙeneseny.\n"
+"Databåzi hardware lze nalézt na:\n"
+"\n"
"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Release: "
-msgstr "Verze: "
+msgid "Can't find %s on %s"
+msgstr "Nelze nalézt %s na %s"
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Kernel:"
-msgstr "JĂĄdro: "
+msgid "Japanese 106 keys"
+msgstr "JaponskĂĄ 106 klĂĄves"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Package: "
-msgstr "Balíček: "
+msgid "This will take a few minutes."
+msgstr "Bude to trvat několik minut."
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Application:"
-msgstr "Aplikace:"
+msgid "Burkina Faso"
+msgstr "Burkina Faso"
-#: ../../standalone/drakbug:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Configuration Wizards"
-msgstr "PrĆŻvodci nastavenĂ­m"
+msgid "Use scanners on remote computers"
+msgstr "PouĆŸĂ­t skenery na vzdĂĄlenĂ©m počítači"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Userdrake"
-msgstr "UserDrake"
+msgid "Delete selected rule"
+msgstr "Smazat vybrané pravidlo"
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Windows Migration tool"
-msgstr "NĂĄstroj pro migraci z Windows"
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Pƙístup k tiskĂĄrnĂĄm na vzdĂĄlenĂ©m CUPS serveru"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
+msgid "Insert a floppy in %s"
+msgstr "VloĆŸte disketu do %s"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Software Manager"
-msgstr "SprĂĄvce software"
+msgid "Maldives"
+msgstr "Maledivy"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Remote Control"
-msgstr "Vzdålené ovlådåní"
+msgid "compact"
+msgstr "kompaktnĂ­"
-#: ../../standalone/drakbug:1
+#: ../../common.pm:1
#, c-format
-msgid "Msec"
-msgstr "Msec"
+msgid "1 minute"
+msgstr "1 minuta"
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
+msgid "on channel %d id %d\n"
+msgstr "na kanĂĄle %d id %d\n"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Mandrake Online"
-msgstr "Mandrake Online"
+msgid ", multi-function device"
+msgstr ", multifunkční zaƙízení"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
+msgid "Laos"
+msgstr "Laos"
-#: ../../standalone/drakbug:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Synchronization tool"
-msgstr "NĂĄstroj na synchronizaci"
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr ""
+"Nejsou zde ĆŸĂĄdnĂ© FAT oddĂ­ly, kterĂ© by bylo moĆŸnĂ© změnit (nebo nenĂ­ dostatek "
+"mĂ­sta)"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "First Time Wizard"
-msgstr "PrĆŻvodce pro novĂ© uĆŸivatele"
+msgid "Up"
+msgstr "Nahoru"
-#: ../../standalone/drakbug:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mandrake Control Center"
-msgstr "OvlĂĄdacĂ­ centrum Mandrake"
+msgid "Firewall"
+msgstr "Firewall"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Mandrake Bug Report Tool"
-msgstr "Nástroj společnosti Mandrake pro hláơení chyb"
+msgid "Area:"
+msgstr "Oblast :"
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Parameters"
-msgstr "Parametry"
+msgid "(E)IDE/ATA controllers"
+msgstr "(E)IDE/ATA kontrolér"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Configuration"
-msgstr "Konfigurace pƙipojení k internetu"
+msgid "Printer Server"
+msgstr "TiskovĂœ server"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "DHCP Client"
-msgstr "DHCP klient"
+msgid "Disconnection from the Internet complete."
+msgstr "Odpojení z Internetu ukončeno."
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ethernet Card"
-msgstr "EthernetovĂĄ karta"
+msgid "Custom configuration"
+msgstr "VlastnĂ­ nastavenĂ­"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Gateway"
-msgstr "BrĂĄna(gateway)"
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
+"Určete, kde je umístěn instalační obraz.\n"
+"\n"
+"Pokud nemĂĄte jiĆŸ existujĂ­cĂ­ adresáƙ, zkopĂ­rujte prosĂ­m obsah CD nebo DVD.\n"
+"\n"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connection type: "
-msgstr "Typ pƙipojení:"
+msgid "Saint Pierre and Miquelon"
+msgstr "Saint Pierre a Miquelon"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Profile: "
-msgstr "Profil: "
+msgid ""
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
+msgstr ""
+"\n"
+"ProblĂ©my pƙi obnově:\n"
+"\n"
+"Pƙi obnovování DrakBackup nejdƙíve ověƙuje vơechny\n"
+"zålohované soubory.\n"
+"Pƙed tĂ­m, neĆŸ je soubor obnoven, provede DrakBackup vĂœmaz\n"
+"pƯvodního souboru, a tak pƙijdete o vơechna data.\n"
+"Buďte proto opatrnĂ­ a nesnaĆŸte se modifikovat zĂĄlohovanĂĄ\n"
+"data ručně.\n"
+"\n"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Internet connection configuration"
-msgstr "Konfigurace pƙipojení k internetu"
+msgid "saving Bootsplash theme..."
+msgstr "uklådåm Bootsplash téma..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"NemĂĄte ĆŸĂĄdnĂ© pƙipojenĂ­ k Internetu.\n"
-"Vytvoƙte si jej klepnutím na 'Konfigurovat'"
+msgid "Portugal"
+msgstr "Portugalsko"
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Toto rozhraní jeơtě nebylo nastaveno.\n"
-"SpusƄte prƯvodce konfigurací z hlavního okna"
+msgid "Do you have another one?"
+msgstr "MĂĄte jeĆĄtě nějakĂ© jinĂ©?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "activate now"
-msgstr "aktivovat nynĂ­"
+msgid ", printing to %s"
+msgstr ", pƙi tisku na %s"
-#: ../../standalone/drakconnect:1
+#: ../../network/network.pm:1
#, c-format
-msgid "deactivate now"
-msgstr "deaktivovat nynĂ­"
+msgid "Assign host name from DHCP address"
+msgstr "Pƙiƙadit nĂĄzev počítače ze zĂ­skanĂ© DHCP adresy"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DHCP client"
-msgstr "DHCP klient"
+msgid "Toggle to normal mode"
+msgstr "Pƙepnout se do módu 'normální'"
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Started on boot"
-msgstr "Spustit pƙi startu"
+msgid "Generic"
+msgstr "ObecnĂœ"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Protocol"
-msgstr "Protokol o spuơtění"
+msgid "Cylinder %d to %d\n"
+msgstr "Od cylindru %d do cylindru %d\n"
#: ../../standalone/drakconnect:1
#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptér %s: %s"
+msgid "New profile..."
+msgstr "NovĂœ profil..."
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LAN Configuration"
-msgstr "NastavenĂ­ LAN"
+msgid "Which disk do you want to move it to?"
+msgstr "Na kterĂœ disk chcete oddĂ­l pƙesunout?"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "LAN configuration"
-msgstr "NastavenĂ­ LAN"
+msgid "Display logo on Console"
+msgstr "Zobrazit logo na konzoli"
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"NemĂĄte nakonfigurovĂĄno ĆŸĂĄdnĂ© rozhranĂ­.\n"
-"Nastavte jej klepnutĂ­m na 'Konfigurovat'"
+msgid "Windows Domain"
+msgstr "Doména Windows"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Connect..."
-msgstr "Pƙipojit..."
+msgid "Interface %s (on network %s)"
+msgstr "RozhranĂ­ %s (na sĂ­ti %s)"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Disconnect..."
-msgstr "Odpojit..."
+msgid "INFO"
+msgstr "INFO"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not connected"
-msgstr "Nepƙipojen"
+msgid "Wallis and Futuna"
+msgstr "Wallis a Futuna"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Connected"
-msgstr "Pƙipojen"
+msgid "Need to create /etc/dhcpd.conf first!"
+msgstr "Je nutnĂ© nejprve vytvoƙit soubor /etc/dhcpd.conf!"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr "VarovĂĄnĂ­, bylo detekovĂĄno jinĂ© pƙipojenĂ­ k Internetu, zƙejmě je to sĂ­Ć„"
+msgid "Is FPU present"
+msgstr "Pƙítomnost FPU"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Interface:"
-msgstr "RozhranĂ­:"
+msgid "There are no scanners found which are available on your system.\n"
+msgstr "Na vaĆĄem počítači nebyly nalezeny ĆŸĂĄdnĂ© pƙipojenĂ© skenery.\n"
-#: ../../standalone/drakconnect:1
+#: ../../services.pm:1
#, c-format
-msgid "Gateway:"
-msgstr "BrĂĄna(gateway):"
+msgid ""
+"No additional information\n"
+"about this service, sorry."
+msgstr ""
+"Nejsou ĆŸĂĄdnĂ© dalĆĄĂ­\n"
+"informace o sluĆŸbě, promiƈte."
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Apply"
-msgstr "PouĆŸĂ­t"
+msgid "Build Single NIC -->"
+msgstr "Sestavit jedinou NIC -->"
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Click here to launch the wizard ->"
-msgstr "Klepněte pro spuơtění prƯvodce ->"
+msgid "Is this correct?"
+msgstr "Je to správně?"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Wizard..."
-msgstr "PrĆŻvodce..."
+msgid "Marshall Islands"
+msgstr "Marshall Islands"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Status:"
-msgstr "Status:"
+msgid "Windows (FAT32)"
+msgstr "Windows (FAT32)"
-#: ../../standalone/drakconnect:1
+#: ../../steps.pm:1
#, c-format
-msgid "Type:"
-msgstr "Typ:"
+msgid "Root password"
+msgstr "HlavnĂ­(root) heslo"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Internet access"
-msgstr "Pƙístup na Internet"
+msgid "Build All Kernels -->"
+msgstr "Sestavit vĆĄechna jĂĄdra -->"
-#: ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Hostname: "
-msgstr "Název počítače: "
+msgid "if set to yes, report unowned files."
+msgstr "pokud je nastaveno, vypisuje soubory bez vlastnĂ­ka."
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Nastavuji lokĂĄlnĂ­ sĂ­Ć„..."
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"NemĂĄte odklĂĄdacĂ­ oddĂ­l\n"
+"\n"
+"Chcete pƙesto pokračovat?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "State"
-msgstr "Status"
+msgid "Server IP missing!"
+msgstr "ChybnĂĄ IP adresa serveru!"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Driver"
-msgstr "Ovladač"
+msgid "Suriname"
+msgstr "Surinam"
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "Protocol"
-msgstr "Protokol"
+msgid "Enable ACPI"
+msgstr "Povolit ACPI"
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "Interface"
-msgstr "RozhranĂ­"
+msgid "Graphical Environment"
+msgstr "GrafickĂ© prostƙedĂ­"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configure Internet Access..."
-msgstr "Nastavuji pƙístup na Internet..."
+msgid "Gibraltar"
+msgstr "Gibraltar"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Wait please"
-msgstr "Čekejte prosím"
+msgid "on Tape Device"
+msgstr "na pĂĄsku"
-#: ../../standalone/drakconnect:1
+#: ../../network/modem.pm:1
#, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Zadejte nĂĄzev vytváƙenĂ©ho profilu (novĂœ profil je vytvoƙen jako kopie "
-"vybraného) :"
+msgid "Do nothing"
+msgstr "Nedělat nic"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "New profile..."
-msgstr "NovĂœ profil..."
+msgid "Delete Client"
+msgstr "Odebrat klienta"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Profile to delete:"
-msgstr "Smazat profil:"
+msgid "Filesystem type: "
+msgstr "SouborovĂœ systĂ©m: "
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Del profile..."
-msgstr "Smazat profil..."
+msgid "Starting network..."
+msgstr "SpouĆĄtĂ­m sĂ­Ć„ ...."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "NastavenĂ­ sĂ­tě (%d adaptĂ©ry(ĆŻ))"
+msgid "Vietnam"
+msgstr "Vietnam"
-#: ../../standalone/drakedm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
-"SprĂĄvce pƙihlĂĄĆĄenĂ­ pro X11 umoĆŸĆˆuje se pƙihlĂĄsit pƙes grafickĂ©\n"
-"rozhranĂ­ k beĆŸĂ­cĂ­mu systĂ©mu X Window a podporuje spuĆĄtěnĂ­ rĆŻznĂœch\n"
-"X sezení na lokálním počítači současně."
+msgid "/_Fields description"
+msgstr "/_Popis poloĆŸek"
-#: ../../standalone/drakedm:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "Choosing a display manager"
-msgstr "VĂœběr sprĂĄvce oken"
+msgid "Optimize your security by using Mandrake Linux"
+msgstr "Optimalizujte vaơe zabezpečení"
-#: ../../standalone/drakfloppy:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
-msgstr ""
-"Nelze korektně ukončit mkbootdisk: \n"
-" %s \n"
-" %s"
+msgid "Help"
+msgstr "Nápověda"
-#: ../../standalone/drakfloppy:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Unable to fork: %s"
-msgstr "Nelze provést fork: %s"
+msgid "Your personal phone number"
+msgstr "Vaơe osobní telefonní číslo"
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Which size do you want to keep for Windows on"
+msgstr "Jakou velikost oddĂ­lu chcete nechat pro Windows na"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
msgstr ""
-"V zaƙízenĂ­ %s nenĂ­ ĆŸĂĄdnĂ© mĂ©dium, nebo je mĂ©dium chrĂĄněno proti zĂĄpisu.\n"
-"VloĆŸte prosĂ­m nějakĂ©."
+"ZkuĆĄebnĂ­ strĂĄnka byl poslĂĄna na tiskĂĄrnu.\n"
+"MĆŻĆŸe chvilku trvat neĆŸ začne tisk.\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "Zkontrolujte, zda v je zaƙízenĂ­ %s vloĆŸeno mĂ©dium"
+msgid "Username required"
+msgstr "VyĆŸadovĂĄno uĆŸivatelskĂ© jmĂ©no"
-#: ../../standalone/drakfloppy:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
+msgstr ""
+"NormĂĄlně zvolĂ­ instalačnĂ­ program sprĂĄvnou klĂĄvesnici na zĂĄkladě zvolenĂ©ho\n"
+"jazyka, takĆŸe nenĂ­ potƙeba nic v tomto kroku měnit. \n"
+"MĆŻĆŸe se ale stĂĄt, ĆŸe nemĂĄte klĂĄvesnici, kterĂĄ odpovĂ­dĂĄ vaĆĄemu jazyku: "
+"napƙíklad\n"
+"pokud jste anglicky hovoƙícĂ­ Ć vĂœcar, stejně chcete mĂ­t ĆĄvĂœcarskou "
+"klĂĄvesnici.\n"
+"Nebo pokud mluvĂ­te anglicky, ale ĆŸijete v Quebecu, je to stejnĂœ pƙípad. V "
+"obou\n"
+"pƙípadech se mĆŻĆŸete vrĂĄtit na tento instalačnĂ­ krok a vybrat si "
+"odpovĂ­dajĂ­cĂ­\n"
+"klĂĄvesnici ze seznamu.\n"
+"\n"
+"Pokud mĂĄte klĂĄvesnici pro jinĂœ jazyk, klepněte na tlačítko \"VĂ­ce\"\n"
+"a zobrazĂ­ se kompletnĂ­ seznam vĆĄech podporovanĂœch rozloĆŸenĂ­ klĂĄvesnic.\n"
+"\n"
+"Pokud vyberete rozloĆŸenĂ­ klĂĄvesnice zaloĆŸenĂ© na abecedě jinĂ© neĆŸ latince,\n"
+"budete v dalĆĄĂ­m dialogu vyzvĂĄni k vĂœběru klĂĄvesovĂ© zkratky, kterĂĄ bude "
+"pƙepínat\n"
+"rozloĆŸenĂ­ klĂĄvesnice mezi latinkou a vĂĄmi zvolenĂœm rozloĆŸenĂ­m."
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build the disk"
-msgstr "Vytvoƙit disk"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "MoĆŸnosti SMB (Windows 9x/NT) tiskĂĄrny"
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Output"
-msgstr "VĂœstup"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
+"Argumenty: (arg)\n"
+"\n"
+"Akceptuje/odmítne nekorektní chybové IPv4 zpråvy."
#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Remove a module"
-msgstr "Odebrat modul"
+msgid "mkinitrd optional arguments"
+msgstr "volitelné argumenty pro mkinitrd"
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Add a module"
-msgstr "Pƙidat modul"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
+"ProhlĂ­ĆŸejte Web pomocĂ­ prohlĂ­ĆŸeče Mozilla nebo Konqueror, čtěte poĆĄtu s "
+"Evolution nebo KMail, tvoƙte svĂ© dokumenty s OpenOffice.Org."
-#: ../../standalone/drakfloppy:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "omit scsi modules"
-msgstr "vynechat SCSI moduly"
+msgid "Protocol for the rest of the world"
+msgstr "Protokol pouĆŸitĂœ ve zbytku světa"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "if needed"
-msgstr "pokud je potƙeba"
+msgid "Print test pages"
+msgstr "Tisk testovacĂ­ch strĂĄnek"
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "omit raid modules"
-msgstr "vynechat RAID moduly"
+msgid "64 MB or more"
+msgstr "64 MB nebo vĂ­ce"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "force"
-msgstr "vnutit"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
+"Vyberte si testovacĂ­ strĂĄnku, kterou chcete vytisknout.\n"
+"PoznĂĄmka: tisk testovacĂ­ strĂĄnky s fotografiĂ­ mĆŻĆŸe trvat velmi dlouho nebo "
+"se na tiskárně s málo pamětí nemusí podaƙit vƯbec. Ve větơině pƙípadƯ stačí "
+"vytisknout bÄ›ĆŸnou testovacĂ­ strĂĄnku."
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "mkinitrd optional arguments"
-msgstr "volitelné argumenty pro mkinitrd"
+msgid "Please select the device where your %s is attached"
+msgstr "Vyberte prosĂ­m zaƙízenĂ­, ke kterĂ©mu je skener %s pƙipojen"
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Expert Area"
-msgstr "ExpertnĂ­ nastavenĂ­"
+msgid "Not formatted\n"
+msgstr "NenaformĂĄtovanĂœ\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "kernel version"
-msgstr "verze jĂĄdra"
+msgid "Periodic Checks"
+msgstr "Pravidelné kontroly"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "default"
-msgstr "pƙedvolenĂ©"
+msgid "PXE Server Configuration"
+msgstr "NastavenĂ­ PXE serveru"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "General"
-msgstr "Obecné"
+msgid "Backup the system files before:"
+msgstr "ZĂĄlohovat systĂ©movĂ© soubory pƙed:"
-#: ../../standalone/drakfloppy:1
+#: ../../security/level.pm:1
#, c-format
-msgid "boot disk creation"
-msgstr "vytváƙení zaváděcích disket"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"Toto je standardnĂ­ Ășroveƈ zabezpečenĂ­ pro počítač, kterĂœ je pouĆŸĂ­vĂĄn jako "
+"klient pro pƙipojení k internetu."
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "First floppy drive"
+msgstr "prvnĂ­ mechaniky"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Size"
-msgstr "Velikost"
+msgid "/File/_Quit"
+msgstr "/Soubor/U_končit"
-#: ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Module name"
-msgstr "NĂĄzev modulu"
+msgid "Dvorak"
+msgstr "Dvoƙák"
-#: ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Post Uninstall"
-msgstr "NastavenĂ­ po odebrĂĄnĂ­"
+msgid "Choose the new size"
+msgstr "Zvolte novou velikost"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Remove fonts on your system"
-msgstr "Odebrat fonty ze systému"
+msgid "Media class"
+msgstr "Tƙída mĂ©diĂ­"
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Initial tests"
-msgstr "Úvodní testy"
+msgid "The %s is not known by this version of Scannerdrake."
+msgstr "Skener %s není zatím v této verzi Scannerdrake podporovån."
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Post Install"
-msgstr "Poinstalační nastavení"
+msgid "Faroe Islands"
+msgstr "Faroe Islands"
#: ../../standalone/drakfont:1
#, c-format
-msgid "Install & convert Fonts"
-msgstr "Instalovat & konvertovat fonty"
+msgid "Restart XFS"
+msgstr "Restartovat XFS"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Copy fonts on your system"
-msgstr "Kopírovat fonty do systému"
+msgid "Add host/network"
+msgstr "Pƙidat počítač/sĂ­Ć„"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Remove List"
-msgstr "Odebrat seznam"
+msgid ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
+msgstr ""
+"pokud je nastaveno, kontroluje heslo, zda není pråzdné heslo v /etc/shadow a "
+"uĆŸivatele, kteƙí majĂ­ id 0 jinĂ­ neĆŸ uĆŸivatel root."
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Selected All"
-msgstr "Vybrat vĆĄe"
+msgid "Please enter the directory to save to:"
+msgstr "Zadejte adresáƙ, kam se bude ukládat:"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Unselected All"
-msgstr "ZruĆĄit celĂœ vĂœběr"
+msgid "Model name"
+msgstr "NĂĄzev modelu"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "here if no."
-msgstr "zde pokud si nejste jisti."
+msgid "Albania"
+msgstr "AlbĂĄnie"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "click here if you are sure."
-msgstr "klepněte zde, pokud jste si jisti."
+msgid "No CDR/DVDR in drive!"
+msgstr "V mechanice není CDR/DVDR médium."
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Install List"
-msgstr "Instalovat seznam"
+msgid "British Indian Ocean Territory"
+msgstr "BritskĂ© teritorium IndickĂ©ho moƙe"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Vyberte soubor s fontem nebo adresáƙ a klepněte na 'Pƙidat'"
+msgid "Normal Mode"
+msgstr "NormĂĄlnĂ­ reĆŸim"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
+"Please be sure that the cron daemon is included in your services. \n"
"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-"Pƙed instalacĂ­ fontĆŻ se ujistěte, ĆŸe mĂĄte potƙebnĂĄ prĂĄva na instalacĂ­ a "
-"pouĆŸĂ­vĂĄnĂ­ na systĂ©mu.\n"
+"Ujistěte se prosĂ­m, ĆŸe mezi sluĆŸbami je pƙítomen cron dĂ©mon.\n"
"\n"
-"- Fonty lze instalovat bÄ›ĆŸnĂœm zpĆŻsobem. Ve vĂœjimečnĂœch pƙípadech mĆŻĆŸe ĆĄpatnĂœ "
-"font zpĆŻsobit zamrznutĂ­ X serveru."
+"V tuto chvĂ­li takĂ© vĆĄechna 'sĂ­Ć„ovĂĄ' mĂ©dia pouĆŸĂ­vajĂ­ pevnĂœ disk."
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generic Printers"
-msgstr "Obecné tiskårny"
+msgid "Printer connection type"
+msgstr "Typ pƙipojení pro tiskárnu"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Abiword"
-msgstr "Abiword"
+msgid "No network adapter on your system!"
+msgstr "Ve vaĆĄem systĂ©mu nenĂ­ ĆŸĂĄdnĂœ sĂ­Ć„ovĂœ adaptĂ©r!"
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
+msgid "Network %s"
+msgstr "SĂ­Ć„ %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
+msgid "Malayalam"
+msgstr "Malayalam"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Zvolte aplikace, které podporují fonty:"
+msgid "Option %s out of range!"
+msgstr "Hodnota %s je mimo rozsah!"
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
-"\n"
-" Copyright ©2001-2002 MandrakeSoft \n"
-"\tDUPONT Sebastien (pĆŻvodnĂ­ verze)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" Tento program je svobodnĂœ software; mĆŻĆŸete ho ơíƙit a/nebo modifikovat\n"
-" podle specifikace GNU General Public Licence, kterĂĄ byla publikovĂĄna\n"
-" Free Software Foundation; buď verze 2, nebo (podle volby) pozdějơí verze.\n"
-"\n"
-" Tento program je distribuovĂĄn s nadějĂ­, ĆŸe bude uĆŸitečnĂœ,\n"
-" ale BEZ JAKÝCHKOLIV ZÁRUK; BEZ NÁROKU NA PROFIT. Více detailƯ naleznete\n"
-" v licenci GNU General Public Licence.\n"
-"\n"
-" Kopii GNU General Public Licence mĆŻĆŸete obdrĆŸet buď s tĂ­mto programem\n"
-" nebo si o nĂ­ mĆŻĆŸete napsat na adresu Free Software Foundation, Inc.,\n"
-" 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Poděkování:\n"
-" - pfm2afm: \n"
-"\t autor Ken Borgendale:\n"
-"\t Pƙevádí Windows .pfm soubor na .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t autor James Macnicol: \n"
-"\t type1inst generuje soubory fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t autoƙi Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Pƙevádí soubory s ttf fonty na soubory afm a pfb\n"
+msgid "Connect %s"
+msgstr "Pƙipojit %s"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "About"
-msgstr "O aplikaci"
+msgid "Restarting CUPS..."
+msgstr "Restartuji CUPS..."
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Font List"
-msgstr "Seznam fontĆŻ"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "Tisk/SkenovĂĄnĂ­/Foto karty na \"%s\""
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Advanced Options"
-msgstr "RozơíƙenĂ© volby"
+msgid "Duplicate mount point %s"
+msgstr "ZdvojenĂœ pƙípojnĂœ bod %s"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Uninstall Fonts"
-msgstr "Odinstalovat fonty"
+msgid "if set to yes, run chkrootkit checks."
+msgstr "pokud je nastaveno, provĂĄdĂ­ kontrolu na chkrootkit."
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Get Windows Fonts"
-msgstr "Načíst fonty z Windows"
+msgid "Connection Configuration"
+msgstr "Nastavení pƙipojení"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Import Fonts"
-msgstr "Zavádění fontƯ"
+msgid "Unknown|Generic"
+msgstr "NeznĂĄmĂĄ|ObecnĂĄ"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
+msgstr ""
+"PokaĆŸdĂ©, kdyĆŸ instalujete distribuci Mandrake Linux, je moĆŸnĂ©, ĆŸe některĂ©\n"
+"balíčky byly od vydĂĄnĂ­ distribuce aktualizovĂĄny. Mohly to bĂœt opravy chyb\n"
+"či ƙeĆĄenĂ­ moĆŸnĂœch bezpečnostnĂ­ch problĂ©mĆŻ. Pokud chcete vyuĆŸĂ­t prĂĄvě\n"
+"tĂ©to nabĂ­dky, je moĆŸnĂ© tyto balíčky nynĂ­ stĂĄhnout z Internetu. Zvolte \"Ano"
+"\"\n"
+"pokud máte funkční pƙipojení na Internet nebo \"Ne\", pokud budete\n"
+"instalovat aktualizace později.\n"
+"\n"
+"Po zvolenĂ­ \"Ano\" se zobrazĂ­ seznam mĂ­st, odkud mohou bĂœt aktualizace "
+"zĂ­skĂĄny.\n"
+"Vyberte si nejbliĆŸĆĄĂ­ mĂ­sto. NĂĄsledně se objevĂ­ stromovĂœ seznam balíčkĆŻ,\n"
+"kterĂœ je moĆŸno jeĆĄtě upravit a stisknutĂ­m tlačítka \"Instalovat\" se provede "
+"staĆŸenĂ­\n"
+"a instalace vybranĂœch balíčkĆŻ. Akci mĆŻĆŸete pƙeruĆĄit klepnutĂ­m na \"ZruĆĄit\"."
+
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "done"
-msgstr "hotovo"
+msgid "Quit"
+msgstr "Konec"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "xfs restart"
-msgstr "restart xfs"
+msgid "Myanmar"
+msgstr "Myanmar"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Suppress Fonts Files"
-msgstr "Ignorovat soubory s fonty"
+msgid "Auto allocate"
+msgstr "Automaticky rozmĂ­stit"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restart XFS"
-msgstr "Restartovat XFS"
+msgid "Check bad blocks?"
+msgstr "Otestovat na vadné stopy?"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Suppress Temporary Files"
-msgstr "Ignorovat dočasnĂ© soubory"
+msgid "Other MultiMedia devices"
+msgstr "Dalơí multimediální zaƙízení"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "type1inst building"
-msgstr "vytváƙím type1inst"
+msgid "No remote machines"
+msgstr "Nejsou ĆŸĂĄdnĂ© vzdĂĄlenĂ© počítače"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "pfm fonts conversion"
-msgstr "konverze pfm fontĆŻ"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"VĂ­tejte v PrĆŻvodci nastavenĂ­m tiskĂĄrny\n"
+"\n"
+"Tento prĆŻvodce vĂĄm pomĆŻĆŸe nainstalovat vaĆĄi tiskĂĄrnu nebo tiskĂĄrny pƙipojenĂ© "
+"k tomuto počítači.\n"
+"\n"
+"Pokud mĂĄte tiskĂĄrnu nebo tiskĂĄrny pƙipojenĂ© k tomuto počítači, zapojte je "
+"prosĂ­m a zapněte je; pak mohou bĂœt automaticky nalezeny. \n"
+"\n"
+"Pokud jste pƙipraveni, klepněte na tlačítko \"Dále\", nebo klepněte na "
+"tlačítko \"Zruơit\" pokud nechcete v tuto chvíli tiskárnu(y) nastavovat."
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "ttf fonts conversion"
-msgstr "konverze ttf fontĆŻ"
+msgid "Authentication NIS"
+msgstr "Ověƙení pomocí NIS"
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Ghostscript referencing"
-msgstr "Odkazy na Ghostscript"
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr ""
+"Volba ''OmezenĂ­ nastavenĂ­ z pƙíkazovĂ© ƙádky'' je bezpƙedmětnĂ© bez hesla"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Fonts conversion"
-msgstr "Konverze fontĆŻ"
+msgid "Internet Connection Sharing currently enabled"
+msgstr "SdĂ­lenĂ­ InternetovĂ©ho pƙipojenĂ­ je zapnuto"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "True Type install done"
-msgstr "Instalace True Type fontƯ je dokončena"
+msgid "Card IO_0"
+msgstr "IO_0 karty"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "čekejte prosĂ­m, prĂĄvě bÄ›ĆŸĂ­ ttmkfdir... "
+msgid "United Arab Emirates"
+msgstr "Spojené Arabské Emiråty"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "True Type fonts installation"
-msgstr "Instalace pĂ­sem True Type"
+msgid "Card IO_1"
+msgstr "IO_1 karty"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Fonts copy"
-msgstr "Kopie fontu"
+msgid "Thailand"
+msgstr "Thajsko"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Search for fonts in installed list"
-msgstr "Hledat fonty mezi instalovanĂœmi"
+msgid "Routers:"
+msgstr "Směrovače:"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "could not find any font.\n"
-msgstr "nelze nalĂ©zt ĆŸĂĄdnĂœ font.\n"
+msgid "Kazakhstan"
+msgstr "KazachstĂĄn"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Reselect correct fonts"
-msgstr "Znovu vybrat språvné fonty"
+msgid "Display all available remote CUPS printers"
+msgstr "Zobrazit seznam vĆĄech vzdĂĄlenĂœch CUPS tiskĂĄren"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_newt.pm:1
#, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr "nelze nalĂ©zt ĆŸĂĄdnĂ© fonty v pƙipojenĂ©m oddĂ­le"
+msgid "Mandrake Linux Installation %s"
+msgstr "Mandrake Linux Instalace %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "no fonts found"
-msgstr "nebyly nalezeny ĆŸĂĄdnĂ© fonty"
+msgid "Thai keyboard"
+msgstr "Thajské"
-#: ../../standalone/drakfont:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "parse all fonts"
-msgstr "zpracovĂĄvĂĄm vĆĄechny fonty"
+msgid "Dialup options"
+msgstr "MoĆŸnosti vytáčenĂ­"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unselect fonts installed"
-msgstr "Odznačit instalovanĂ© fonty"
+msgid "Bouvet Island"
+msgstr "Bouvet Island"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Search installed fonts"
-msgstr "Hledåm instalované fonty"
+msgid "If no port is given, 631 will be taken as default."
+msgstr "Pokud nenĂ­ zadĂĄn ĆŸĂĄdnĂœ port, bude jako vĂœchozĂ­ pouĆŸit port 631."
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
+"Change your Cd-Rom!\n"
"\n"
-"Click on Configure to launch the setup wizard."
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
-"Vítá vás prƯvodce nastavením sdílení pƙipojení k Internetu!\n"
+"Vyměƈte prosím CD!\n"
"\n"
-"%s\n"
+"ProsĂ­m vloĆŸte CD označenĂ© \"%s\" do mechaniky a stiskněte Ok.\n"
"\n"
-"Klepněte na Konfigurovat, pokud chcete spustit prƯvodce nastavením."
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "Nastavení sdílení pƙipojení k Internetu"
+"Pokud toto CD nemáte, stiskněte Zruơit a toto CD nebude nainstalováno."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "NenĂ­ nastaveno ĆŸĂĄdnĂ© sdĂ­lenĂ­ InternetovĂ©ho pƙipojenĂ­."
+msgid "Polish"
+msgstr "Polské"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "NastavenĂ­ jiĆŸ bylo provedeno, nynĂ­ je povoleno."
+msgid "Mandrake Online"
+msgstr "Mandrake Online"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "NastavenĂ­ jiĆŸ bylo provedeno, ale nynĂ­ je vypnuto."
+msgid "\t-Network by webdav.\n"
+msgstr "\t-Sítí pƙes WebDAV.\n"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
msgstr ""
-"Vơe se podaƙilo nastavit.\n"
-"NynĂ­ lze pouĆŸĂ­t tento počítač pro sdĂ­lenĂ­ pƙipojenĂ­ k Internetu pro vaĆĄi "
-"lokĂĄlnĂ­ sĂ­Ć„, kterĂĄ pouĆŸĂ­vĂĄ automatickou konfiguraci sĂ­tě (DHCP)."
+"Ve vaĆĄem počítači nebyl nalezen ĆŸĂĄdnĂœ sĂ­Ć„ovĂœ adaptĂ©r. SpusĆ„te prosĂ­m program "
+"pro nastavenĂ­ hardware."
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Problems installing package %s"
-msgstr "ProblĂ©m s instalacĂ­ balíčku %s"
+msgid "Netmask"
+msgstr "Maska sítě"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Nastavuji skripty, instaluji software, startuji servery..."
+msgid "No hard drives found"
+msgstr "Nenalezeny ĆŸĂĄdnĂ© pevnĂ© disky!"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring..."
-msgstr "Nastavuji..."
+msgid "Logitech CC Series"
+msgstr "Logitech série CC (sériovå)"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "NaĆĄel jsem moĆŸnĂœ konflikt v současnĂ©m nastavenĂ­ LAN adresy pro %s!\n"
+msgid "2 buttons"
+msgstr "2 tlačítka"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Číslo lokální sítě nekončí na .0, zkouơím znovu."
+msgid "What kind is your ISDN connection?"
+msgstr "JakĂ© je vaĆĄe ISDN pƙipojenĂ­?"
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "Pƙenastavení rozhraní a DHCP serveru"
+msgid "Label"
+msgstr "Značka"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr "MaximĂĄlnĂ­ doba pronĂĄjmu (sekundy)"
+msgid "Save on floppy"
+msgstr "UloĆŸit na disketu"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The default lease (in seconds)"
-msgstr "VĂœchozĂ­ doba pronĂĄjmu (sekundy)"
+msgid "Printer auto-detection"
+msgstr "Autodetekce tiskĂĄrny"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The DHCP end range"
-msgstr "Konec pĂĄsma adres DHCP"
+msgid "Which of the following is your ISDN card?"
+msgstr "Kterou z těchto ISDN karet máte?"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
-msgid "The DHCP start range"
-msgstr "Počátek pásma adres DHCP"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
+msgstr ""
+"NFS je oblĂ­benĂœ protokol pro sdĂ­lenĂ­ souborĆŻ pƙes sĂ­tě TCP/IP.\n"
+"Tato sluĆŸba poskytuje NFS server, jehoĆŸ nastavenĂ­ je v /etc/exports."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The internal domain name"
-msgstr "Interní nåzev domény"
+msgid "Msec"
+msgstr "Msec"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "The DNS Server IP"
-msgstr "IP adresa DNS serveru"
+msgid ""
+"=> Notice, a label changed:\n"
+"%s"
+msgstr ""
+"=> Oznamuji změnu návěơtí:\n"
+"%s"
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "Adresa DHCP serveru"
+msgid "Number of capture buffers:"
+msgstr "Počet bufferƯ pro zachycení :"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
+msgid "Your choice? (0/1, default `%s') "
+msgstr "VaĆĄe volba? (0/1, vĂœchozĂ­ '%s') "
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"DHCP Server Configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
"\n"
-msgstr ""
-"NastavenĂ­ DHCP serveru.\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
"\n"
-"Zde mĆŻĆŸete vybrat rĆŻznĂ© volby nastavenĂ­ DHCP serveru.\n"
-"Pokud nevĂ­te, co kterĂĄ volba znamenĂĄ, ponechte jejĂ­ vĂœchozĂ­ hodnotu.\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
"\n"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Local Network adress"
-msgstr "Adresa lokální sítě"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
msgstr ""
-"Mohu zachovat současnĂ© nastavenĂ­ a pƙedpoklĂĄdat, ĆŸe mĂĄte jiĆŸ nastavenĂœ DHCP "
-"server; v takovĂ©m pƙípadě ověƙte, ĆŸe je sprĂĄvně pƙevzato nastavenĂ­ sĂ­tě "
-"odpovĂ­dajĂ­cĂ­ vaĆĄĂ­ lokĂĄlnĂ­ sĂ­ti; nebude v něm provedena ĆŸĂĄdnĂĄ změna a nebude "
-"ani změněno nastavení DHCP serveru.\n"
+"KaĆŸdĂœ nově vytvoƙenĂœ diskovĂœ oddĂ­l musĂ­ bĂœt pƙed pouĆŸitĂ­m zformĂĄtovĂĄn\n"
+"(formĂĄtovĂĄnĂ­m se myslĂ­ vytvoƙenĂ­ souborovĂ©ho systĂ©mu).\n"
"\n"
-"VĂœchozĂ­ zĂĄznam DNS je vyrovnĂĄvacĂ­ jmennĂœ server (caching nameserver) "
-"nastavenĂœ na vaĆĄem firewallu. Tento zĂĄznam lze nahradit napƙíklad IP adresou "
-"vaơeho poskytovatele pƙipojení k Internetu.\n"
+"NynĂ­ lze formĂĄtovat jiĆŸ existujĂ­cĂ­ diskovĂ© oddĂ­ly pro vymazĂĄnĂ­\n"
+"vƥech dat, kterå obsahují. Pokud to chcete provést, vyberte diskové oddíly\n"
+"pro pƙeformátování.\n"
"\n"
-"Jinak mohu změnit jak rozhranĂ­, tak takĂ© pƙenastavit DHCP server podle "
-"potƙeby.\n"
+"NenĂ­ ale nutnĂ© pƙeformĂĄtovat vĆĄechny jiĆŸ existujĂ­cĂ­ diskovĂ© oddĂ­ly.\n"
+"Je nutnĂ© pƙeformĂĄtovat oddĂ­ly, kterĂ© obsahujĂ­ operačnĂ­ systĂ©m (jako je \"/"
+"\",\n"
+"\"/usr\" nebo \"/var\") ale nenĂ­ nutnĂ© pƙeformĂĄtovat oddĂ­ly, kterĂ© obsahujĂ­\n"
+"data, kterĂĄ chcete zachovat (typicky /home).\n"
"\n"
+"Pƙi vĂœběru diskovĂœch oddĂ­lĆŻ, kterĂ© se budou formĂĄtovat buďte opatrnĂ­, "
+"vĆĄechna\n"
+"data na formĂĄtovanĂœch oddĂ­lech budou ztracena a nelze je jiĆŸ obnovit.\n"
+"\n"
+"Pokud je vơe pƙipraveno pro formátování, klepněte na \"Dále ->\".\n"
+"\n"
+"Klepněte na \"Zpět\" pokud chcete vybrat jinĂ© oddĂ­ly pro instalaci\n"
+"systému Mandrake Linux.\n"
+"\n"
+"KlepnutĂ­m na \"RozơíƙenĂ©\" mĆŻĆŸete vybrat, kterĂ© oddĂ­ly budou otestovĂĄny\n"
+"na vadné bloky."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "French"
+msgstr "Francouzské"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTY)"
+msgstr "ČeskĂ© (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
+#, c-format
+msgid "Hardware probing in progress"
+msgstr "ProbĂ­hĂĄ detekce hardware"
#: ../../standalone/drakgw:1
#, c-format
+msgid "Net Device"
+msgstr "SĂ­Ć„ovĂ© zaƙízenĂ­"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Summary"
+msgstr "Souhrn"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
-"AktuĂĄlnĂ­ konfigurace pro '%s':\n"
-"\n"
-"SĂ­Ć„: %s\n"
-"IP adresa: %s\n"
-"IP atributy: %s\n"
-"Ovladač: %s"
+" (ParalelnĂ­ porty: /dev/lp0, /dev/lp1,... je ekvivalentnĂ­ LPT1:, LPT2:, ...,"
+"prvnĂ­ USB tiskĂĄrna: /dev/usb/lp0, druhĂĄ USB tiskĂĄrna: /dev/usb/lp1,...)."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Current interface configuration"
-msgstr "AktuĂĄlnĂ­ nastavenĂ­ rozhranĂ­"
+msgid "Next"
+msgstr "DalĆĄĂ­"
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Show current interface configuration"
-msgstr "Zobrazit aktuĂĄlnĂ­ nastavenĂ­ rozhranĂ­"
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "Zaváděcí program nelze nainstalovat na oddíl %s\n"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "No (experts only)"
-msgstr "Ne (pouze pro experty)"
+msgid "CHAP"
+msgstr "CHAP"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Automatic reconfiguration"
-msgstr "AutomatickĂ© pƙenastavenĂ­"
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp/zeroconf)"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
"\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
"\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
-"VarovĂĄnĂ­, sĂ­Ć„ovĂœ adaptĂ©r (%s) je jiĆŸ nastaven.\n"
"\n"
-"Chcete ho automaticky pƙenastavit?\n"
+"VĂ­tejte.\n"
"\n"
-"Lze to takĂ© provĂ©st ručně, ale musĂ­te vědět, co dělĂĄte."
+"Parametry pro automatickou instalaci jsou pƙístupnĂ© v sekci nalevo"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface already configured"
-msgstr "SĂ­Ć„ovĂ© rozhranĂ­ je jiĆŸ nastaveno"
+msgid "Puerto Rico"
+msgstr "Puerto Rico"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "ProsĂ­m zvolte si, ke kterĂ©mu sĂ­Ć„ovĂ©mu adaptĂ©ru bude pƙipojena LAN."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgstr ""
+"pro sprĂĄvnou funkci je poĆŸadovĂĄn balíček ImageMagick.\n"
+"Balíček nainstalujete tlačítkem \"OK\", nebo skončete tlačítkem \"Zruơit\"."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "LitevskĂ© \"číselnĂĄ ƙada\" QWERTY"
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
-"%s\n"
"\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
msgstr ""
-"Na vaƥem systému je nastaveno pouze jedno síƄové rozhraní:\n"
+"NĂĄsledujĂ­cĂ­ balíčky budou odebrĂĄny pro umoĆŸněnĂ­ aktualizace systĂ©mu: %s\n"
"\n"
-"%s\n"
"\n"
-"Na tomto adaptéru bude nastavena lokålní síƄ."
+"Opravdu chcete odebrat tyto balíčky?\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface"
-msgstr "SíƄové rozhraní"
+msgid "Anguilla"
+msgstr "Anguilla"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Ve vaĆĄem počítači nebyl nalezen ĆŸĂĄdnĂœ sĂ­Ć„ovĂœ adaptĂ©r. SpusĆ„te prosĂ­m program "
-"pro nastavenĂ­ hardware."
+msgid "NIS Domain"
+msgstr "NIS Doména"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No network adapter on your system!"
-msgstr "Ve vaĆĄem systĂ©mu nenĂ­ ĆŸĂĄdnĂœ sĂ­Ć„ovĂœ adaptĂ©r!"
+msgid ""
+"\n"
+"- User Files:\n"
+msgstr ""
+"\n"
+"- Soubory uĆŸivatelĆŻ:\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s"
-msgstr "RozhranĂ­ %s"
+msgid "Antarctica"
+msgstr "Antarktida"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "RozhranĂ­ %s (pouĆŸĂ­vĂĄ modul %s)"
+msgid "Mount options"
+msgstr "Volby pro pƙipojení"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Net Device"
-msgstr "SĂ­Ć„ovĂ© zaƙízenĂ­"
+msgid "Jamaica"
+msgstr "Jamajka"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
-"Zadejte prosĂ­m nĂĄzev rozhranĂ­, kterĂ© je pƙipojeno k Internetu.\n"
-"\n"
-"Pƙíklady:\n"
-"\t\tppp+ pro modem nebo pro DSL pƙipojení,\n"
-"\t\teth0 nebo eth1 pro pƙipojení pƙes kabel,\n"
-"\t\tippp+ pro isdn pƙipojení.\n"
+"Pƙiƙazuje pƙímĂĄ zaƙízenĂ­ blokovĂœm (napƙíklad diskovĂ© oddĂ­ly)\n"
+"pro aplikace jako je Oracle nebo DVD pƙehrávač"
-#: ../../standalone/drakgw:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
msgstr ""
-"VĂĄĆĄ počítač bude nastaven pro sdĂ­lenĂ­ svĂ©ho pƙipojenĂ­ k Internetu.\n"
-"Tato vlastnost umoĆŸĆˆuje pƙístup dalĆĄĂ­ch počítačƯ na lokĂĄlnĂ­ sĂ­ti k sĂ­ti "
-"Internet pƙes pƙipojení tohoto počítače.\n"
-"\n"
-"Pƙed pokračovĂĄnĂ­m se ujistěte, ĆŸe jste nastavili vaĆĄi sĂ­Ć„ a pƙipojenĂ­ k "
-"Internetu pomocĂ­ aplikace drakconnect.\n"
+"Argumenty: (arg, alert=1)\n"
"\n"
-"Pozn.: Pro nastavenĂ­ lokĂĄlnĂ­ sĂ­tě (LAN) potƙebujete vyhrazenĂœ sĂ­Ć„ovĂœ adaptĂ©r."
+"PovolĂ­/ZakĂĄĆŸe ochranu pƙed spoofingem jmennĂœch sluĆŸeb. Pokud\n"
+"je \\fIalert\\fP nastaveno, vypĂ­ĆĄe report do syslogu."
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Internet Connection Sharing"
-msgstr "SdĂ­lenĂ­ InternetovĂ©ho PƙipojenĂ­"
+msgid "Please wait, preparing installation..."
+msgstr "Čekejte prosím, pƙipravuji instalaci"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "SdĂ­lenĂ­ InternetovĂ©ho pƙipojenĂ­ je nynĂ­ zapnuto."
+msgid "Czech (QWERTZ)"
+msgstr "ČeskĂ© (QWERTZ)"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Enabling servers..."
-msgstr "Povoluji servery..."
+msgid "Track network card id (useful for laptops)"
+msgstr "Sledovat id sĂ­Ć„ovĂ© karty (uĆŸitečnĂ© u notebookĆŻ)"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "dismiss"
-msgstr "odmĂ­tnout"
+msgid "The port number should be an integer!"
+msgstr "Číslo portu musĂ­ bĂœt celĂ© číslo!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "reconfigure"
-msgstr "pƙekonfigurovat"
+msgid "You must choose an image file first!"
+msgstr "Nejprve musĂ­te vybrat soubor s obrazem!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "enable"
-msgstr "povolit"
+msgid "Restore from Hard Disk."
+msgstr "Obnovit z pevného disku."
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"InternetovĂ© sdĂ­lenĂ­ uĆŸ bylo nastaveno.\n"
-"NynĂ­ je vypnuto.\n"
-"\n"
-"Co chcete dále dělat?"
+msgid "Add to LVM"
+msgstr "Pƙidat do LVMu"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "SdĂ­lenĂ­ InternetovĂ©ho pƙipojenĂ­ je vypnuto"
+msgid "DNS server"
+msgstr "DNS server"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "SdĂ­lenĂ­ InternetovĂ©ho pƙipojenĂ­ je nynĂ­ vypnuto."
+msgid "Trinidad and Tobago"
+msgstr "Trinidad a Tobago"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disabling servers..."
-msgstr "Zakazuji servery..."
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr "LPD ani LprNG nepodporujĂ­ IPP tiskĂĄrny.\n"
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "disable"
-msgstr "vypnout"
+msgid "simple"
+msgstr "jednoduchĂœ"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"SdĂ­lenĂ­ internetovĂ©ho pƙipojenĂ­ uĆŸ bylo nastaveno.\n"
-"NynĂ­ je povoleno.\n"
-"\n"
-"Co chcete dále dělat?"
+msgid "Clear all"
+msgstr "VĆĄe smazat"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "SdĂ­lenĂ­ InternetovĂ©ho pƙipojenĂ­ je zapnuto"
+msgid "No test pages"
+msgstr "Bez testovacĂ­ strĂĄnky"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
-msgstr "Omlouváme se, ale podporujeme pouze jádra ƙady 2.4."
+msgid "Adapter %s: %s"
+msgstr "Adaptér %s: %s"
-#: ../../standalone/drakhelp:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
+msgid "Falkland Islands (Malvinas)"
+msgstr "Falklandy (Malvinas)"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Unknown model"
+msgstr "NeznĂĄmĂœ model"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check files/directories writable by everybody."
msgstr ""
-"V systĂ©mu nenĂ­ instalovĂĄn ĆŸĂĄdnĂœ prohlĂ­ĆŸeč. Pokud chcete pouĆŸĂ­vat nĂĄpovědu, "
-"je nutnĂ© nějakĂœ nainstalovat."
+"pokud je nastaveno, kontroluje, kterĂ© soubory/adresáƙe jsou zapisovatelnĂ© "
+"pro vĆĄechny."
-#: ../../standalone/drakperm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "authentication"
+msgstr "Ověƙení"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Path"
-msgstr "Cesta"
+msgid "Backup Now"
+msgstr "ZĂĄlohovat nynĂ­"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "group :"
-msgstr "skupina :"
+msgid "/_File"
+msgstr "/_Soubor"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "user :"
-msgstr "uĆŸivatel :"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
+msgstr "OdebĂ­rĂĄm tiskĂĄrnu ze Star Office/OpenOffice.org/GIMP"
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
#, c-format
-msgid "Path selection"
-msgstr "VĂœběr cesty"
+msgid ""
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
+msgstr ""
+"Spustit paketovĂœ filtr pro jĂĄdra ƙady 2.2, kterĂœ chrĂĄnĂ­ počítač\n"
+"proti ĂștokĆŻm ze sĂ­tě."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "when checked, owner and group won't be changed"
-msgstr "pokud zaơkrtnuto, vlastník a skupina nebudou změněny"
+msgid "Tamil (ISCII-layout)"
+msgstr "Tamilské (ISCII)"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use group id for execution"
-msgstr "PouĆŸĂ­t pƙi spuĆĄtěnĂ­ ID skupiny"
+msgid "Mayotte"
+msgstr "Mayotte"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use owner id for execution"
-msgstr "PouĆŸĂ­t pƙi spuĆĄtěnĂ­ ID vlastnĂ­ka"
+msgid "Creating auto install floppy..."
+msgstr "Vytváƙím disketu pro automatickou instalaci"
-#: ../../standalone/drakperm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
-"PouĆŸito pro adresáƙ:\n"
-" pouze vlastnĂ­k adresáƙe nebo souboru v tomto adresáƙi jej mĆŻĆŸe smazat"
+msgid "Searching for scanners ..."
+msgstr "VyhledĂĄvĂĄm skenery..."
-#: ../../standalone/drakperm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Set-GID"
-msgstr "Set-GID"
+msgid "Partitioning"
+msgstr "Rozdělení disku"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Set-UID"
-msgstr "Set-UID"
+msgid "Russia"
+msgstr "Rusko"
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "sticky-bit"
-msgstr "sticky-bit"
+msgid "ethernet card(s) detected"
+msgstr "detekovanĂĄ(Ă©) sĂ­Ć„ovĂĄ(Ă©) karta(y)"
-#: ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Property"
-msgstr "Vlastnost"
+msgid "Syslog"
+msgstr "Syslog"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Permissions"
-msgstr "Oprávnění"
+msgid "Can't create catalog!"
+msgstr "Nelze vytvoƙit katalog!"
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Current user"
-msgstr "AktuĂĄlnĂ­ uĆŸivatel"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
+msgstr ""
+"Dokončete vaĆĄe nastavenĂ­ bezpečnosti s tĂ­mto snadno pouĆŸitelnĂœm software, "
+"kterĂ© kombinuje velmi vĂœkonnĂ© komponenty jako firewall, server a klient "
+"virtuĂĄlnĂ­ soukromĂ© sĂ­tě (VPN), systĂ©m detekce prĆŻniku a sprĂĄvce provozu."
-#: ../../standalone/drakperm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "browse"
-msgstr "prochĂĄzet"
+msgid "Not enough free space for auto-allocating"
+msgstr "NenĂ­ dostatek mĂ­sta pro automatickĂ© rozdělenĂ­ disku"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Edit current rule"
-msgstr "Upravit současnĂ© pravidlo"
+msgid "Set root password"
+msgstr "HlavnĂ­(root) heslo"
-#: ../../standalone/drakperm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "edit"
-msgstr "upravit"
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
+msgstr ""
+"Pro vaĆĄi zvukovou kartu (%s) nenĂ­ ĆŸĂĄdnĂœ vhodnĂœ volně pouĆŸitelnĂœ ovladač, ale "
+"existuje alternativní proprietární ovladač na \"%s\"."
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Delete selected rule"
-msgstr "Smazat vybrané pravidlo"
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr "KdyĆŸ změnĂ­te velikost oddĂ­lu %s, ztratĂ­te tĂ­m vĆĄechna jeho data"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "delete"
-msgstr "smazat"
+msgid "Internet connection configuration"
+msgstr "Konfigurace pƙipojení k internetu"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Add a new rule at the end"
-msgstr "Pƙidat novĂ© pravidlo na konec"
+msgid "Scanning for TV channels"
+msgstr "VyhledĂĄvĂĄm TV kanĂĄly"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "add a rule"
-msgstr "pƙidat pravidlo"
+msgid "Kernel:"
+msgstr "JĂĄdro: "
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Move selected rule down one level"
-msgstr "Posunout vybranĂ© pravidlo o Ășroveƈ nĂ­ĆŸe"
+msgid "/_About..."
+msgstr "/_O aplikaci..."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Down"
-msgstr "DolĆŻ"
+msgid "Bengali"
+msgstr "Bengålské"
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Move selected rule up one level"
-msgstr "Posunout vybranĂ© pravidlo o Ășroveƈ vĂœĆĄe"
+msgid "Preference: "
+msgstr "NastavenĂ­: "
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Up"
-msgstr "Nahoru"
+msgid "Wizard..."
+msgstr "PrĆŻvodce..."
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "select perm file to see/edit"
-msgstr "vyberte soubor s oprĂĄvněnĂ­m pro zobrazenĂ­/Ășpravy"
+msgid "Services: %d activated for %d registered"
+msgstr "SluĆŸby: aktivovĂĄno %d z %d registrovanĂœch"
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-"Aplikace DrakPerm se pouĆŸĂ­vĂĄ k zobrazenĂ­ souborĆŻ, kterĂ© se pouĆŸĂ­vajĂ­ k "
-"ĂșpravĂĄm oprĂĄvněnĂ­, vlastnĂ­kĆŻ a skupin aplikacĂ­ msec.\n"
-"MĆŻĆŸete takĂ© vytváƙet svĂĄ vlastnĂ­ pravidla, kterĂĄ pƙepĂ­ĆĄĂ­ pravidla vĂœchozĂ­."
+msgid "Create a bootdisk"
+msgstr "StartovacĂ­ disketa"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "permissions"
-msgstr "oprávnění"
+msgid "Solomon Islands"
+msgstr "Solomon Islands"
-#: ../../standalone/drakperm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "group"
-msgstr "skupina"
+msgid "(module %s)"
+msgstr "(modul %s)"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "user"
-msgstr "uĆŸivatel"
+msgid "Workgroup"
+msgstr "PracovnĂ­ skupina"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "path"
-msgstr "cesta"
+msgid "Printer host name or IP"
+msgstr "NĂĄzev nebo IP adresa tiskĂĄrny"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Umístění souboru auto_install.cfg"
+msgid "Host Path or Module"
+msgstr "Cesta na počítači nebo modul"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
-"Určete, kde je umístěn soubor auto_install.cfg.\n"
-"\n"
-"Ponechte prĂĄzdnĂ©, pokud nechcete pouĆŸĂ­t reĆŸim automatickĂ© instalace.\n"
-"\n"
+msgid "Name of printer should contain only letters, numbers and the underscore"
+msgstr "NĂĄzev fronty mĆŻĆŸe obsahovat pouze pĂ­smena, číslice a podtrĆŸĂ­tko"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
-"Nebylo nalezen CD či DVD obraz, prosím zkopírujte instalační program a rpm "
-"soubory."
+msgid "Show current interface configuration"
+msgstr "Zobrazit aktuĂĄlnĂ­ nastavenĂ­ rozhranĂ­"
-#: ../../standalone/drakpxe:1
+#: ../../help.pm:1
#, c-format
-msgid "No image found"
-msgstr "Obraz nebyl nalezen"
+msgid "Development"
+msgstr "VĂœvoj"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Installation image directory"
-msgstr "Adresáƙ s obrazem instalace"
+msgid "Done"
+msgstr "Hotovo"
-#: ../../standalone/drakpxe:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
-"Určete, kde je umístěn instalační obraz.\n"
-"\n"
-"Pokud nemĂĄte jiĆŸ existujĂ­cĂ­ adresáƙ, zkopĂ­rujte prosĂ­m obsah CD nebo DVD.\n"
-"\n"
+msgid "Web Server"
+msgstr "WebovĂœ server"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The DHCP end ip"
-msgstr "Konec pĂĄsma adres DHCP"
+msgid "\tDo not include System Files\n"
+msgstr "\tNezahrnout systémové soubory\n"
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "The DHCP start ip"
-msgstr "Počátek pásma adres DHCP"
+msgid "Chile"
+msgstr "Chile"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
msgstr ""
-"DHCP server dovoluje dalĆĄĂ­m počítačƯm spuĆĄtěnĂ­ pomocĂ­ PXE s vyuĆŸitĂ­m danĂ©ho "
-"rozsahu adres.\n"
+"Inkoustové tiskårny dodåvané firmou Lexmark podporují pouze tisk na lokålní "
+"tiskĂĄrně, takĆŸe nelze tisknout pƙes vzdĂĄlenĂœ server. ProsĂ­m pƙipojte "
+"tiskĂĄrnu na lokĂĄlnĂ­ port nebo ji nastavte na tom počítači, ke kterĂ©mu bude "
+"pƙipojena."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
"\n"
-"SĂ­Ć„ovĂĄ adresa je %s a pouĆŸitĂĄ maska je %s\n"
+"Do not use \"scannerdrake\" for this device!"
+msgstr ""
+"MultifunkčnĂ­ zaƙízenĂ­ od HP bylo automaticky nastaveno pro moĆŸnost "
+"skenovĂĄnĂ­. NynĂ­ lze skenovat z pƙíkazovĂ©ho ƙádku pƙíkazem \"scanimage"
+"\" (pƙíkazem \"scanimage -d hp:%s\" zvolĂ­te poĆŸadovanĂœ skener, pokud jich "
+"mĂĄte vĂ­ce) nebo z grafickĂ©ho prostƙedĂ­ pomocĂ­ \"xscanimage\" nebo \"xsane\". "
+"Pokud pouĆŸĂ­vĂĄte program GIMP, mĆŻĆŸete takĂ© skenovat vĂœběrem z nabĂ­dky \"Soubor"
+"\"/\"ZĂ­skat\". VĂ­ce informacĂ­ zĂ­skĂĄte takĂ© pƙíkazem \"man scanimage\" "
+"spuĆĄtěnĂœm na pƙíkazovĂ© ƙádce.\n"
"\n"
+"NepouĆŸĂ­vejte pro toto zaƙízenĂ­ \"scannerdrake\"!"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
#, c-format
-msgid "Interface %s (on network %s)"
-msgstr "RozhranĂ­ %s (na sĂ­ti %s)"
+msgid "(already added %s)"
+msgstr "(uĆŸ byl pƙidĂĄn %s)"
-#: ../../standalone/drakpxe:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr "Vyberte si prosĂ­m, kterĂœ sĂ­Ć„ovĂœ adaptĂ©r chcete pouĆŸĂ­t pro dhcp server."
+msgid ", using command %s"
+msgstr ", pouĆŸĂ­vĂĄ pƙíkaz %s"
-#: ../../standalone/drakpxe:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"VĂĄĆĄ počítač bude nastaven jako instalačnĂ­ PXE server se sluĆŸbou DHCP\n"
-"a TFTP serveru.\n"
-"Tato vlastnost umoĆŸĆˆuje instalovat dalĆĄĂ­ počítače na lokĂĄlnĂ­ sĂ­ti pomocĂ­\n"
-"počítače.\n"
-"\n"
-"Pƙed pokračovĂĄnĂ­m se ujistěte, ĆŸe jste nastavili vaĆĄi sĂ­Ć„ a pƙipojenĂ­ k "
-"Internetu pomocĂ­ aplikace drakconnect.\n"
-"\n"
-"Pozn.: Pro nastavenĂ­ lokĂĄlnĂ­ sĂ­tě (LAN) potƙebujete vyhrazenĂœ sĂ­Ć„ovĂœ adaptĂ©r."
+msgid "Alt and Shift keys simultaneously"
+msgstr "Alt a Shift současně"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Installation Server Configuration"
-msgstr "NastavenĂ­ pro instalaci serveru"
+msgid "Flags"
+msgstr "Pƙíznaky"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "PXE Server Configuration"
-msgstr "NastavenĂ­ PXE serveru"
+msgid "Add/Del Users"
+msgstr "Pƙidat/Odebrat uĆŸivatele"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please wait, setting security options..."
-msgstr "Čekejte prosím, nastavuji volby zabezpečení..."
+msgid "Host/network IP address missing."
+msgstr "Chybí IP adresa počítače/sítě."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please wait, setting security level..."
-msgstr "Čekejte prosĂ­m, nastavuji Ășroveƈ zabezpečenĂ­..."
+msgid "weekly"
+msgstr "kaĆŸdĂœ tĂœden"
-#: ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Periodic Checks"
-msgstr "Pravidelné kontroly"
+msgid "Settings"
+msgstr "NastavenĂ­"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "System Options"
-msgstr "Systémové volby"
+msgid "The entered host/network IP is not correct.\n"
+msgstr "ZadanĂĄ IP adresa pro počítač nebo sĂ­Ć„ nenĂ­ sprĂĄvnĂĄ.\n"
-#: ../../standalone/draksec:1
+#: ../../any.pm:1
#, c-format
-msgid "Network Options"
-msgstr "Volby sítě"
+msgid "Here is the full list of available countries"
+msgstr "Zde je kompletnĂ­ seznam dostupnĂœch zemĂ­"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Alternative test page (A4)"
+msgstr "AlternativnĂ­ testovacĂ­ strĂĄnka (A4)"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
-"Nastavením následujících voleb lze upravit zabezpečení vaơeho\n"
-"systĂ©mu. Pokud potƙebujete poradit, prohlĂ©dněte si tipy s nĂĄpovědou.\n"
+"Pokud mĂĄte vĆĄechna CD vypsanĂĄ nĂ­ĆŸe, klepněte na Ok.\n"
+"Pokud nemĂĄte ĆŸĂĄdnĂ© z nich, klepněte na ZruĆĄit.\n"
+"Pokud VĂĄm chybĂ­ pouze některĂ© z nich, odznačte je, a zvolte Ok."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Security Administrator:"
-msgstr "Správce bezpečnosti:"
+msgid "Wait please"
+msgstr "Čekejte prosím"
-#: ../../standalone/draksec:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Security Alerts:"
-msgstr "Bezpečnostní varování:"
+msgid "PAP"
+msgstr "PAP"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Security Level:"
-msgstr "Úroveƈ zabezpečení:"
+msgid "Backup user files"
+msgstr "ZĂĄlohovat uĆŸivatelskĂ© soubory"
-#: ../../standalone/draksec:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "(default value: %s)"
-msgstr "(vĂœchozĂ­ hodnota: %s)"
+msgid "New"
+msgstr "NovĂœ"
-#: ../../standalone/draksec:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-" to the Internet as a client.\n"
-"\n"
-"High: There are already some restrictions, and more automatic checks "
-"are run every night.\n"
-"\n"
-"Higher: The security is now high enough to use the system as a server "
-"which can accept\n"
-" connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-" should choose a lower level.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
"\n"
-"Paranoid: This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-" features are at their maximum\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
"\n"
-"Security Administrator:\n"
-" If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-" email)"
-msgstr ""
-"StandardnĂ­: BÄ›ĆŸnĂ© zabezpečenĂ­ doporučenĂ© pro počítač, kterĂœ bude pƙipojen k "
-"sĂ­ti\n"
-" Internet jako klient.\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
"\n"
-"VysokĂĄ: Jsou jiĆŸ zavedena některĂĄ omezenĂ­ a kaĆŸdou noc je spuĆĄtěno "
-"několik automatickĂœch kontrol.\n"
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
"\n"
-"VyĆĄĆĄĂ­: Úroveƈ zabezpečenĂ­ je nynĂ­ dostatečně vysokĂĄ, aby bylo moĆŸnĂ© "
-"pouĆŸĂ­t\n"
-" systĂ©m jako server, kterĂœ pƙijĂ­mĂĄ poĆŸadavky od mnoha klientĆŻ. "
-"Pokud je vĂĄĆĄ\n"
-"\t počítač pƙipojen k Internetu jen jako klient, měli byste zvolit "
-"niĆŸĆĄĂ­ Ășroveƈ.\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
"\n"
-"ParanoidnĂ­: PodobnĂĄ pƙedchozĂ­ Ășrovni, ale systĂ©m je zcela uzavƙen a Ășroveƈ "
-"zabezpečení\n"
-" je na svém maximu.\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
"\n"
-"Správce bezpečnosti:\n"
-" Pokud je zapnuta volba 'Bezpečnostní varování', budou "
-"bezpečnostnĂ­ varovĂĄnĂ­ zasĂ­lĂĄna tomuto uĆŸivateli (uĆŸivatelskĂ© jmĂ©no nebo\n"
-"\t email)"
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
+msgstr ""
+"NĂĄsledujĂ­cĂ­ rozhodnutĂ­ je jednĂ­m z těch, kterĂ© ovlivƈujĂ­ celkovou "
+"bezpečnost\n"
+"systĂ©mu GNU/Linux, tj. volba hesla pro uĆŸivatele \"Root\". Root je sprĂĄvcem\n"
+"systĂ©mu, je odpovědnĂœ za provĂĄděnĂ­ aktualizacĂ­, pƙidĂĄvĂĄnĂ­ uĆŸivatelĆŻ a takĂ©\n"
+"za celkovĂ© nastavenĂ­ systĂ©mu. ZkrĂĄceně: \"root\" mĆŻĆŸe Ășplně vĆĄechno!\n"
+"To je takĂ© dĆŻvodem, proč se heslo volĂ­ takovĂ©, aby se nedalo lehce uhodnout\n"
+"a instalačnĂ­ program DrakX zkontroluje, zda nenĂ­ pƙíliĆĄ jednoduchĂ©. Jak "
+"vidĂ­te,\n"
+"je moĆŸnĂ© heslo nezadat, ale toto velmi dĆŻrazně nedoporučujeme, a to z "
+"jednoho\n"
+"dĆŻvodu. Nemyslete si, ĆŸe pokud spustĂ­te systĂ©m GNU/Linux, ĆŸe je vĆĄe bezpečnĂ© "
+"a ĆŸe se nemĆŻĆŸe nic stĂĄt.. Vzhledem k tomu, ĆŸe na uĆŸivatele \"root\" se "
+"nevztahujĂ­\n"
+"bÄ›ĆŸnĂĄ omezenĂ­, mĆŻĆŸe nenĂĄvratně poĆĄkodit celĂœ systĂ©m, smazat data z jinĂœch\n"
+"oddĂ­lĆŻ na disku a operačnĂ­ch systĂ©mĆŻ, vymazat potƙebnĂ© soubory nebo celĂ©\n"
+"oddĂ­ly, atd. Proto je dĆŻleĆŸitĂ©, aby nebylo jednoduchĂ© se tĂ­mto uĆŸivatelem "
+"stĂĄt.\n"
"\n"
+"ZvolenĂ© heslo by se mělo sklĂĄdat ze znakĆŻ a číslic a mělo by bĂœt dlouhĂ©\n"
+"minimĂĄlně 8 znakĆŻ. TakĂ© nenĂ­ dobrĂ© si ho kamkoliv poznamenĂĄvat - po\n"
+"nalezenĂ­ vaĆĄĂ­ poznĂĄmky mĆŻĆŸe bĂœt velmi jednoduchĂ© se do vaĆĄeho systĂ©mu\n"
+"dostat.\n"
"\n"
+"Nevolte vĆĄak heslo pƙíliĆĄ dlouhĂ© nebo komplikovanĂ©, bude nutnĂ© si jej bez\n"
+"větĆĄĂ­ch potĂ­ĆŸĂ­ zapamatovat.\n"
"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
-msgstr ""
+"Pƙi zadávání nebude heslo na obrazovce zobrazeno. Proto se heslo zadává\n"
+"dvakrĂĄt pro ověƙenĂ­, zda nedoĆĄlo k pƙeklepu pƙi prvnĂ­m pokusu. Tak je moĆŸnĂ©\n"
+"heslo opravit a zadat dvakrĂĄt stejnĂ©. Pokud se vĂĄm pƙesto podaƙí zadat "
+"stejnĂœ\n"
+"pƙeklep dvakrĂĄt, budete muset toto heslo s pƙeklepem pouĆŸĂ­t pƙi prvnĂ­m\n"
+"pƙihláơení.\n"
"\n"
+"JestliĆŸe chcete pouĆŸĂ­t ověƙovacĂ­ server, klepněte na tlačítko \"RozơíƙenĂ©"
+"\".\n"
"\n"
+"Pokud se ve vaĆĄĂ­ sĂ­ti pouĆŸĂ­vĂĄ pro ověƙovĂĄnĂ­ uĆŸivatelĆŻ protokol LDAP, NIS,\n"
+"nebo ověƙovacĂ­ domĂ©na Windows PDC, vyberte odpovĂ­dajĂ­cĂ­ protokol. Pokud\n"
+"o tom nic nevíte, zeptejte se správce vaơí sítě.\n"
"\n"
-"Pozn: Pokud mĂĄte PnP zvukovou kartu na ISA, pouĆŸijte program sndconfig. "
-"Spustíte ho pƙíkazem \"sndconfig\" v konzoli."
+"Pokud nenĂ­ počítač pƙipojen do ĆŸĂĄdnĂ© spravovanĂ© sĂ­tě a věƙíte vĆĄem, kteƙí "
+"majĂ­\n"
+"pƙístup k počítači, mĆŻĆŸete vybrat volbu \"Bez hesla\".moĆŸnost \"LokĂĄlnĂ­ "
+"soubory\"."
-#: ../../standalone/draksound:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"If you do not know what to choose, stay with the default option."
msgstr ""
-"V počítači nebyla nalezena ĆŸĂĄdnĂĄ zvukovĂĄ karta karta. Zkontrolujte prosĂ­m,"
-"zda podporovaná karta je správně zapojena.\n"
-"\n"
-"\n"
-"Databåzi hardware lze nalézt na:\n"
-"\n"
+"NynĂ­ si vyberte Ășroveƈ zabezpečenĂ­ vaĆĄeho počítače Je zƙejmĂ©, ĆŸe čím vĂ­ce\n"
+"je počítač vyuĆŸĂ­vĂĄn a čím cennějĆĄĂ­ data obsahuje, tĂ­m je potƙeba zvolit "
+"vyĆĄĆĄĂ­\n"
+"Ășroveƈ. Na druhou stranu, vyĆĄĆĄĂ­ Ășroveƈ znesnadƈuje některĂ© obvyklĂ© postupy.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"Pokud nevĂ­te co vybrat, ponechte vĂœchozĂ­ nastavenĂ­."
-#: ../../standalone/draksound:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No Sound Card detected!"
-msgstr "Nebyla nalezena ĆŸĂĄdnĂĄ zvukovĂĄ karta!"
+msgid "Load from floppy"
+msgstr "NahrĂĄt z diskety"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "%s BootSplash (%s) preview"
-msgstr "Nåhled tématu Bootsplash %s (%s)"
+msgid "The following printer was auto-detected. "
+msgstr "Byla automaticky detekovĂĄna nĂĄsledujĂ­cĂ­ tiskĂĄrna. "
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Generating preview ..."
-msgstr "Generuji nĂĄhled ..."
+msgid "Boot Floppy"
+msgstr "Spouơtěcí disketa"
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You must choose an image file first!"
-msgstr "Nejprve musĂ­te vybrat soubor s obrazem!"
+msgid "Norwegian"
+msgstr "Norské"
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "ProgressBar color selection"
-msgstr "VĂœběr barvy pro liĆĄtu s prĆŻběhem"
+msgid "Searching for new scanners ..."
+msgstr "Vyhledåvåm nové skenery ..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
-msgstr "Toto tĂ©ma nemĂĄ jeĆĄtě ĆŸĂĄdnĂœ bootsplash v %s !"
+msgid "Apache World Wide Web Server"
+msgstr "Server pro World Wide Web Apache"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "stepping of the cpu (sub model (generation) number)"
+msgstr "Model cpu (generovanĂ© číslo pro submodel)"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "saving Bootsplash theme..."
-msgstr "uklådåm Bootsplash téma..."
+msgid "select path to restore (instead of /)"
+msgstr "vyberte cestu pro obnovenĂ­ (mĂ­sto /)"
#: ../../standalone/draksplash:1
#, c-format
-msgid "choose image file"
-msgstr "vyberte soubor s obrazem"
+msgid "Configure bootsplash picture"
+msgstr "Nastavit obrĂĄzek pro bootsplash"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "choose image"
-msgstr "vyberte obraz"
+msgid "China"
+msgstr "Čína"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configure bootsplash picture"
-msgstr "Nastavit obrĂĄzek pro bootsplash"
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr " (Zkontrolujte to, ĆŸe vĆĄechny tiskĂĄrny jsou pƙipojeny a zapnuty).\n"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Make kernel message quiet by default"
-msgstr "NevypisovĂĄnĂ­ hlĂĄĆĄek jĂĄdra nastavit jako vĂœchozĂ­"
+msgid "Georgia"
+msgstr "Georgie"
-#: ../../standalone/draksplash:1
+#: ../../standalone/printerdrake:1
#, c-format
-msgid "Display logo on Console"
-msgstr "Zobrazit logo na konzoli"
+msgid "Reading data of installed printers..."
+msgstr "NačítĂĄm data z instalovanĂœch tiskĂĄren..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose color"
-msgstr "vĂœběr barvy"
+msgid " Erase Now "
+msgstr " Vymazat nynĂ­ "
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Save theme"
-msgstr "uloĆŸit tĂ©ma"
+msgid "server"
+msgstr "server"
-#: ../../standalone/draksplash:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Preview"
-msgstr "nĂĄhled"
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "VloĆŸte naformĂĄtovanou disketu do %s"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "the color of the progress bar"
-msgstr "barva liơty s prƯběhem"
+msgid "yes means the processor has an arithmetic coprocessor"
+msgstr "ano znamenĂĄ, ĆŸe procesor mĂĄ aritmetickĂœ koprocesor"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "the height of the progress bar"
-msgstr "vĂœĆĄka liĆĄty s prĆŻběhem"
+msgid "Please Wait... Applying the configuration"
+msgstr "Čekejte prosím... Aktivuji konfiguraci"
-#: ../../standalone/draksplash:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "the width of the progress bar"
-msgstr "ơíƙka liơty s prƯběhem"
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Vita Vas GRUB, program pro vyber operacniho systemu"
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-"umístění y souƙadnice pro\n"
-"levĂœ hornĂ­ roh liĆĄty s prĆŻběhem"
+msgid "Grub"
+msgstr "Grub"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-"umístění x souƙadnice pro\n"
-"levĂœ hornĂ­ roh liĆĄty s prĆŻběhem"
+msgid "SCSI controllers"
+msgstr "SCSI kontrolér"
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "text box height"
-msgstr "vĂœĆĄka textovĂ©ho boxu"
+msgid " on LPD server \"%s\", printer \"%s\""
+msgstr " na serveru LPD \"%s\", tiskĂĄrna \"%s\""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
#, c-format
-msgid "text width"
-msgstr "ơíƙka textu"
+msgid "Choosing a display manager"
+msgstr "VĂœběr sprĂĄvce oken"
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"hodnota pro y souƙadnici\n"
-"pro textovĂœ box v počtu znakĆŻ"
+msgid "Zeroconf Host name"
+msgstr "Název počítače pro Zeroconf"
-#: ../../standalone/draksplash:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"hodnota pro x souƙadnici\n"
-"pro textovĂœ box v počtu znakĆŻ"
+msgid "IP address should be in format 1.2.3.4"
+msgstr "IP adresa musĂ­ bĂœt ve formĂĄtu 1.2.3.4"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Browse"
-msgstr "ProchĂĄzet"
+msgid "Ecuador"
+msgstr "EkvĂĄdor"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Theme name"
-msgstr "Nåzev tématu"
+msgid "Add an item"
+msgstr "Pƙidat poloĆŸku"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "final resolution"
-msgstr "konečnĂ© rozliĆĄenĂ­"
+msgid "The printers on this machine are available to other computers"
+msgstr "TiskĂĄrny na tomto počítači jsou pƙístupnĂ© jinĂœm vzdĂĄlenĂœm počítačƯm"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "first step creation"
-msgstr "první krok pƙi vytváƙení"
+msgid "I can't find needed image file `%s'."
+msgstr "Nemohu najĂ­t potƙebnĂœ soubor '%s ' s obrazem."
-#: ../../standalone/draksplash:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr ""
-"pro sprĂĄvnou funkci je poĆŸadovĂĄn balíček ImageMagick.\n"
-"Balíček nainstalujete tlačítkem \"OK\", nebo skončete tlačítkem \"Zruơit\"."
+"Nebyla nalezena zvukovĂĄ karta. Zkuste spustit po instalaci \"harddrake\"."
-#: ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
msgstr ""
-"V počítači nebyla nalezena ĆŸĂĄdnĂĄ TV karta. Zkontrolujte prosĂ­m, zda "
-"podporovaná karta je správně zapojena.\n"
-"\n"
-"\n"
-"Databåzi hardware lze nalézt na:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"ZadĂĄn ĆĄpatnĂœ port: %s.\n"
+"SprĂĄvnĂœ formĂĄt je \"port/tcp\" nebo \"port/udp\", \n"
+"kde číslo portu je mezi 1 a 65535."
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "No TV Card detected!"
-msgstr "Nebyla nalezena TV karta!"
+msgid "Shell"
+msgstr "Shell"
-#: ../../standalone/drakxtv:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "NynĂ­ mĆŻĆŸete spustit aplikaci XawTV (pod X Windows!)\n"
+msgid "PCI"
+msgstr "PCI"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Have a nice day!"
-msgstr "Pƙeji hezkĂœ den!"
+msgid "Sao Tome and Principe"
+msgstr "Sao Tome a Principe"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "XawTV isn't installed!"
-msgstr "Aplikace XawTV nenĂ­ nainstalovanĂĄ!"
+msgid "Can't login using username %s (bad password?)"
+msgstr "Nelze se pƙihlĂĄsit pod uĆŸivatelskĂœm jmĂ©nem %s (chybnĂ© heslo?)"
-#: ../../standalone/drakxtv:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Nastala chyba pƙi zkoumání TV kanálƯ"
+msgid "Azerbaidjani (latin)"
+msgstr "ÁzerbĂĄjdĆŸĂĄnskĂ© (latinka)"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Scanning for TV channels"
-msgstr "VyhledĂĄvĂĄm TV kanĂĄly"
+msgid "Package not installed"
+msgstr "Balíček není nainstalován"
-#: ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Scanning for TV channels in progress ..."
-msgstr "ProbĂ­hĂĄ vyhledĂĄvĂĄnĂ­ TV kanĂĄlĆŻ ..."
+msgid "Become a MandrakeExpert"
+msgstr "Staƈte se Mandrake Expertem"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Area:"
-msgstr "Oblast :"
+msgid "American Samoa"
+msgstr "AmerickĂĄ Samoa"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "TV norm:"
-msgstr "Norma TV:"
+msgid "Protocol"
+msgstr "Protokol"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Copy fonts on your system"
+msgstr "Kopírovat fonty do systému"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Harddrake help"
+msgstr "Nápověda pro HardDrake"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Bogomips"
+msgstr "BogoMIPS"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Mandrake Terminal Server Configuration"
+msgstr "NastavenĂ­ Mandrake Terminal Server"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Please,\n"
-"type in your tv norm and country"
+"\n"
+" DrakBackup Report Details\n"
+"\n"
+"\n"
msgstr ""
-"Zadejte prosĂ­m\n"
-"typ TV normy a zemi"
+"\n"
+" Detaily o reportu pro DrackBackup\n"
+"\n"
+"\n"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Australian Optus cable TV"
-msgstr "AustralskĂĄ kabelovĂĄ televize Optus"
+msgid "Restore all backups"
+msgstr "Obnovit vĆĄechny zĂĄlohy"
-#: ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Newzealand"
-msgstr "NovĂœ ZĂ©land"
+msgid "if set to yes, check open ports."
+msgstr "pokud je nastaveno, provĂĄdĂ­ se kontrola na otevƙenĂ© porty."
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "France [SECAM]"
-msgstr "Francie [SECAM]"
+msgid "This may take a moment to erase the media."
+msgstr "VymazĂĄnĂ­ mĂ©dia mĆŻĆŸe chvĂ­li trvat."
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "East Europe"
-msgstr "VĂœchodnĂ­ Evropa"
+msgid "You can't select/unselect this package"
+msgstr "NemĆŻĆŸete vybrat/nevybrat tento balíček"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "West Europe"
-msgstr "ZĂĄpadnĂ­ Evropa"
+msgid "Warning"
+msgstr "VarovĂĄnĂ­"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "China (broadcast)"
-msgstr "Čína (broadcast)"
+msgid ""
+"\n"
+"- Other Files:\n"
+msgstr ""
+"\n"
+"- DalĆĄĂ­ soubory:\n"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Japan (cable)"
-msgstr "Japonsko (kabel)"
+msgid "Remote host name"
+msgstr "NĂĄzev vzdĂĄlenĂ©ho počítače"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Japan (broadcast)"
-msgstr "Japonsko (broadcast)"
+msgid "deactivate now"
+msgstr "deaktivovat nynĂ­"
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "Canada (cable)"
-msgstr "Kanada (kabel)"
+msgid "access to X programs"
+msgstr "pƙístup k programƯm v X prostƙedí"
-#: ../../standalone/drakxtv:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "USA (cable-hrc)"
-msgstr "USA (cable-hrc)"
+msgid "Computing the size of the Windows partition"
+msgstr "PočítĂĄm volnĂ© mĂ­sto na Windows oddĂ­lu"
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#: ../../standalone/drakxtv:1
#, c-format
-msgid "USA (cable)"
-msgstr "USA (kabel)"
+msgid "Italy"
+msgstr "ItĂĄlie"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "USA (broadcast)"
-msgstr "USA (broadcast)"
+msgid "Name of printer"
+msgstr "NĂĄzev tiskĂĄrny"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"XawTV isn't installed!\n"
-"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
-msgstr ""
-"Aplikace XawTV nenĂ­ nainstalovanĂĄ!\n"
-"\n"
-"\n"
-"Máte-li TV kartu a nástroj DrakX ji ani nerozpoznal (není pƙítomen\n"
-"modul bttv nebo saa7314 v \"/etc/modules\"), ani nenainstaloval\n"
-"aplikaci XawTV, poĆĄlete prosĂ­m vĂœsledek pƙíkazu\n"
-"\"lspcidrake -v -f\" na adresu \"install\\@mandrakesoft.com\"\n"
-"s pƙedmětem zprávy \"undetected TV card\".\n"
-"\n"
-"Tuto aplikaci mĆŻĆŸete doinstalovat pƙíkazem \"urpmi xawtv\" spuĆĄtěnĂœm \n"
-"v konzoli pod uĆŸivatelem root."
+msgid "disable"
+msgstr "vypnout"
-#: ../../standalone/harddrake2:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "primary"
-msgstr "primĂĄrnĂ­"
+msgid "error unmounting %s: %s"
+msgstr "chyba odpojovĂĄnĂ­ %s: %s"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "secondary"
-msgstr "sekundĂĄrnĂ­"
+msgid "Do it!"
+msgstr "Provést!"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Cayman Islands"
+msgstr "Kajmanské ostrovy"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "%s not responding"
+msgstr "%s neodpovĂ­dĂĄ"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Select model manually"
+msgstr "Vybrat model ručně"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Format"
+msgstr "FormĂĄtovat"
+
+#: ../../network/adsl.pm:1
#, c-format
msgid ""
-"Click on a device in the left tree in order to display its information here."
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
msgstr ""
-"Klepněte na zaƙízenĂ­ v levĂ© části stromu a zobrazĂ­te zde o něm informace."
+"NejbÄ›ĆŸněji se pro pƙipojenĂ­ pomocĂ­ ADSL pouĆŸĂ­vĂĄ pppoe.\n"
+"NěkterĂĄ pƙipojenĂ­ pouĆŸĂ­vajĂ­ pptp, některĂĄ pouze dhcp. Jestli si nejste "
+"jistĂ­, zvolte 'pouĆŸĂ­t pppoe'"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Unknown"
-msgstr "NeznĂĄmĂœ"
+msgid "Various"
+msgstr "DalĆĄĂ­"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "unknown"
-msgstr "neznĂĄmĂœ"
+msgid "Zip"
+msgstr "Zip"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Running \"%s\" ..."
-msgstr "SpouĆĄtĂ­m \"%s\" ..."
+msgid ""
+"\n"
+"\n"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
+msgstr ""
+"\n"
+"\n"
+"PrinterDrake nemohl zjistit, jakĂœ model je vaĆĄe tiskĂĄrna %s. ProsĂ­m vyberte "
+"si odpovĂ­dajĂ­cĂ­ model ze seznamu."
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Run config tool"
-msgstr "Spustit nĂĄstroj pro nastavenĂ­"
+msgid ""
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
+msgstr ""
+"\n"
+"Označte tiskĂĄrnu, kterou chcete pƙenĂ©st a stiskněte \"PƙenĂ©st\"."
-#: ../../standalone/harddrake2:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Configure module"
-msgstr "Nastavit modul"
+msgid "PDQ"
+msgstr "PDQ"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Information"
-msgstr "Informace"
+msgid "Albanian"
+msgstr "Albånské"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Detected hardware"
-msgstr "NalezenĂœ hardware"
+msgid "Lithuania"
+msgstr "Litva"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "Harddrake2 version "
-msgstr "Verze Harddrake2 "
+msgid "Compact"
+msgstr "KompaktnĂ­"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detection in progress"
-msgstr "ProbĂ­hĂĄ detekce"
+msgid "Detected model: %s %s"
+msgstr "Nalezen model: %s %s"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Author:"
-msgstr "Autor:"
+msgid "MandrakeSoft has selected the best software for you"
+msgstr "MandrakeSoft pro vĂĄs vybral ten nejlepĆĄĂ­ software"
#: ../../standalone/harddrake2:1
-#, c-format
+#, fuzzy, c-format
msgid ""
"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
msgstr ""
"Toto je HardDrake, nástroj společnosti Mandrake pro nastavení hardware.\n"
"Verze:"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "About Harddrake"
-msgstr "O aplikaci HardDrake"
+msgid "Local files"
+msgstr "LokĂĄlnĂ­ soubory"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "/_About..."
-msgstr "/_O aplikaci..."
+msgid "maybe"
+msgstr "mĆŻĆŸe se hodit"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "/_Report Bug"
-msgstr "/Nah_lĂĄsit chybu"
+msgid "Panama"
+msgstr "Panama"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
msgstr ""
-"Pokud vyberete nějakĂ© zaƙízenĂ­, uvidĂ­te o něm informace v pravĂ©m rĂĄmci "
-"(\"Informace\")"
+"Vaơe grafická karta zƙejmě disponuje konektorem pro TV-OUT.\n"
+"Tento konektor mĆŻĆŸe bĂœt zprovozněn pouĆŸitĂ­m tzv. frame bufferu.\n"
+"\n"
+"Aby to bylo moĆŸnĂ©, budete muset napojit svou grafickou kartu na televiznĂ­ "
+"pƙijĂ­mač, a to jeĆĄtě neĆŸ zapnete vĂĄĆĄ počítač.\n"
+"PotĂ© vyberte ve vaĆĄem zavaděči poloĆŸku \"TV out\".\n"
+"\n"
+"MĂĄ vaĆĄe karta tuto vlastnost?"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Select a device !"
-msgstr "Zvolte zaƙízení !"
+msgid "Monitor"
+msgstr "Monitor"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Description of the fields:\n"
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
"\n"
msgstr ""
-"Popis polĂ­:\n"
+"ProvĂĄdĂ­te nastavenĂ­ tisku s Ășčtem na systĂ©mu Windows. DĂ­ky chybě v klientu "
+"protokolu Samba je heslo pƙi tisku poslĂĄno jako čistĂœ text z pƙíkazovĂ© "
+"ƙádky. Je tudĂ­ĆŸ moĆŸnĂ©, aby kdokoliv viděl toto heslo na obrazovce kdyĆŸ si "
+"zadá pƙíkaz napƙ. \"ps auxwww\".\n"
+"\n"
+"Doporučujeme pouĆŸĂ­vat jednu z nĂĄsledujĂ­cĂ­ch alternativ (ve vĆĄech pƙípadech "
+"je dobrĂ© mĂ­t nastaven pƙístup pouze z počítačƯ z lokĂĄlnĂ­ sĂ­tě, respektive za "
+"firewallem):\n"
+"\n"
+"PouĆŸĂ­t Ășčet, kterĂœ nemĂĄ nastaven ĆŸĂĄdnĂ© heslo, jako je \"GUEST\" nebo "
+"speciĂĄlnĂ­ Ășčet pouze pro Ășčely tisku. Neodstraƈujte ochranu heslem z bÄ›ĆŸnĂ©ho "
+"Ășčtu nebo dokonce z administrĂĄtorskĂ©ho Ășčtu.\n"
+"\n"
+"Nastavte tiskĂĄrnu na Windows serveru tak, aby fungovala pod LPD protokolem. "
+"Potom nastavte tisk na tĂ©to tiskĂĄrně pomocĂ­ typy spojenĂ­ \"%s\" v aplikaci "
+"PrinterDrake.\n"
"\n"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Harddrake help"
-msgstr "Nápověda pro HardDrake"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "/_Fields description"
-msgstr "/_Popis poloĆŸek"
-
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#, c-format
-msgid "/_Help"
-msgstr "/_Nápověda"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "/_Quit"
-msgstr "/_Konec"
-
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "/Automaticky detekovat _jazz disky"
+msgid "65 thousand colors (16 bits)"
+msgstr "65 tisĂ­c barev (16 bitĆŻ)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/Autodetect _modems"
-msgstr "/Automaticky detekovat _modemy"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
+msgstr ""
+"\n"
+"- UloĆŸit na pevnĂœ disk do adresáƙe: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "/Autodetect _printers"
-msgstr "/Automaticky detekovat _tiskĂĄrny"
+msgid "Size: %d KB\n"
+msgstr "Velikost: %d kB\n"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "/_Options"
-msgstr "/_Volby"
+msgid "Remove fonts on your system"
+msgstr "Odebrat fonty ze systému"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "the vendor name of the processor"
-msgstr "jméno dodavatele procesoru"
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
+msgstr ""
+"VarovĂĄnĂ­, sĂ­Ć„ovĂœ adaptĂ©r (%s) je jiĆŸ nastaven.\n"
+"\n"
+"Chcete ho automaticky pƙenastavit?\n"
+"\n"
+"Lze to takĂ© provĂ©st ručně, ale musĂ­te vědět, co dělĂĄte."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "the vendor name of the device"
-msgstr "jmĂ©no dodavatele zaƙízenĂ­"
+msgid "Graphical interface at startup"
+msgstr "SpouĆĄtĂ­ se X"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "Typ sběrnice, ke kterĂ© je pƙipojena myĆĄ"
+msgid "Please enter the directory to save:"
+msgstr "Zadejte adresáƙ, kam bude umístěna záloha:"
#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
-msgstr "Model cpu (generovanĂ© číslo pro submodel)"
+#, fuzzy, c-format
+msgid "format of floppies supported by the drive"
+msgstr "Druhy formåtu disket podporované mechanikou"
-#: ../../standalone/harddrake2:1
+#: ../../raid.pm:1
#, c-format
-msgid "Model stepping"
-msgstr "Číslování modelu"
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "NenĂ­ dostatek oddĂ­lĆŻ pro RAID Ășrovně %d\n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "the number of the processor"
-msgstr "číslo procesoru"
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
+msgstr ""
+"Jsou nastaveny nĂĄsledujĂ­cĂ­ tiskĂĄrny. DvojitĂœm klepnutĂ­m na kaĆŸdou z nich je "
+"moĆŸnĂ© je modifikovat, nastavit jako vĂœchozĂ­ nebo o nich zĂ­skat informace."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Processor ID"
-msgstr "ID procesoru"
+msgid "Connected"
+msgstr "Pƙipojen"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "network printer port"
-msgstr "port síƄové tiskårny"
+msgid "USB printer \\#%s"
+msgstr "USB tiskĂĄrna \\#%s"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "the name of the CPU"
-msgstr "nĂĄzev CPU"
+msgid "Macedonian"
+msgstr "Makedonské"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Name"
-msgstr "NĂĄzev"
+msgid "Bridges and system controllers"
+msgstr "Systémové kontroléry"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "the number of buttons the mouse has"
-msgstr "počet tlačítek na myơi"
+msgid "/File/_Save"
+msgstr "/Soubor/_UloĆŸit"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Number of buttons"
-msgstr "Počet tlačítek"
+msgid "Mali"
+msgstr "Mali"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Official vendor name of the cpu"
-msgstr "Oficiålní jméno dodavatele procesoru"
+msgid "No details"
+msgstr "Bez detailĆŻ"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Model name"
-msgstr "NĂĄzev modelu"
+msgid "very nice"
+msgstr "nejmĂ©ně dĆŻleĆŸitĂ©"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
-msgstr "Generace cpu (napƙ. 8 pro Pentium III, ...)"
+msgid "Preview"
+msgstr "nĂĄhled"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Model"
-msgstr "Model"
+msgid "Remote Control"
+msgstr "Vzdålené ovlådåní"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "hard disk model"
-msgstr "model pevného disku"
+msgid "Please select media for backup..."
+msgstr "Prosím zvolte si médium pro zålohy..."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "class of hardware device"
-msgstr "tƙída hardwarovĂ©ho zaƙízenĂ­"
+msgid "XFree86 server: %s\n"
+msgstr "XFree86 server: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Media class"
-msgstr "Tƙída mĂ©diĂ­"
+msgid "Allow Thin Clients"
+msgstr "Povolit tenké klienty"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Sub generation of the cpu"
-msgstr "Specifická tƙída cpu"
+msgid "Georgian (\"Russian\" layout)"
+msgstr "GruzĂ­nskĂ© (\"RuskĂ©\" rozloĆŸenĂ­)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Level"
-msgstr "Úroveƈ"
+msgid "/_Options"
+msgstr "/_Volby"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Format of floppies supported by the drive"
-msgstr "Druhy formåtu disket podporované mechanikou"
+msgid "Your printer model"
+msgstr "Model tiskĂĄrny"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "Floppy format"
-msgstr "FormĂĄty pro diskety"
+msgid ""
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
+msgstr ""
+"\n"
+"\n"
+"(VAROVÁNÍ! Pro koƙenovĂœ oddĂ­l pouĆŸĂ­vĂĄte XFS, vytvoƙenĂ­ \n"
+"spouĆĄtěcĂ­ diskety bude zƙejmě neĂșspěơnĂ©, protoĆŸe XFS\n"
+"potƙebuje velmi velkĂœ ovladač)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"\n"
+"- Delete hard drive tar files after backup.\n"
msgstr ""
-"NěkterĂ© prvnĂ­ modely čipsetĆŻ i486DX100 neprovĂĄděly sprĂĄvně po instrukci "
-"\"halt\" nĂĄvrat do operačnĂ­ho reĆŸimu"
+"\n"
+"- Smazat pomocné tar soubory po provedení zålohy.\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Halt bug"
-msgstr "Halt chyba"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
+msgstr ""
+"Nebylo nalezen CD či DVD obraz, prosím zkopírujte instalační program a rpm "
+"soubory."
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
-"PrvnĂ­ verze procesorĆŻ Pentium byly chybovĂ© a zpĆŻsobovaly zatuhnutĂ­ pƙi "
-"dekĂłdovĂĄnĂ­ instrukce F00F"
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "VĂ­ceĂșčelovĂœ konfiguračnĂ­ nĂĄstroj Mandrake"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "F00f bug"
-msgstr "F00f chyba"
+msgid "Save"
+msgstr "UloĆŸit"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr "ano znamenĂĄ, ĆŸe aritmetickĂœ koprocesor je vybaven vektorem vĂœjimek"
+msgid "The %s is unsupported"
+msgstr "Skener %s nenĂ­ podporovĂĄn"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr "Zda mĂĄ FPU irq vektor"
+msgid "Load the drivers for your usb devices."
+msgstr "Nahrát ovladače pro usb zaƙízení."
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr "ano znamenĂĄ, ĆŸe procesor mĂĄ aritmetickĂœ koprocesor"
+msgid "Disk"
+msgstr "Disk"
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Is FPU present"
-msgstr "Pƙítomnost FPU"
+msgid "Enter a printer device URI"
+msgstr "Zadejte URI tiskovĂ©ho zaƙízenĂ­"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
msgstr ""
-"PrvnĂ­ verze procesorĆŻ Pentium měly z vĂœroby chybu v jednotce pro plovoucĂ­ "
-"ƙádovou čárku, kterĂĄ nedosahovala poĆŸadovanĂ© pƙesnosti pƙi operaci FDIV"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Fdiv bug"
-msgstr "Fdiv chyba"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr "Pƙíznaky CPU nalezenĂ© jĂĄdrem"
+"Úspěch společnosti MandrakeSoft je zaloĆŸen na principech SvobodnĂ©ho "
+"Software. Tento operačnĂ­ systĂ©m je vĂœsledkem spoluprĂĄce části celosvětovĂ© "
+"Linuxové komunity"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Flags"
-msgstr "Pƙíznaky"
+msgid "Israel"
+msgstr "Izrael"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr "modul jĂĄdra systĂ©mu GNU/Linux, kterĂœ ovlĂĄdĂĄ toto zaƙízenĂ­"
+msgid "French Guiana"
+msgstr "FrancouzskĂĄ Guinea"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Module"
-msgstr "Modul"
+msgid "default:LTR"
+msgstr "default:LTR"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr ""
-"novĂœ, dynamickĂœ nĂĄzev zaƙízenĂ­, kterĂœ generuje zabudovanĂœ systĂ©m jĂĄdra devfs"
+msgid "add a rule"
+msgstr "pƙidat pravidlo"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New devfs device"
-msgstr "NovĂ© zaƙízenĂ­ devfs"
+msgid "A command line must be entered!"
+msgstr "MusĂ­ bĂœt zadĂĄn nějakĂœ pƙíkaz!"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "old static device name used in dev package"
-msgstr "starĂœ, statickĂœ nĂĄzev zaƙízenĂ­, kterĂœ se pouĆŸĂ­vĂĄ v balíčku dev"
+msgid "Select user manually"
+msgstr "Vybrat uĆŸivatele manuĂĄlně"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Old device file"
-msgstr "StarĂœ soubor se zaƙízenĂ­m"
+msgid "Transfer printer configuration"
+msgstr "PƙenĂ©st konfiguraci tiskĂĄrny"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This field describes the device"
-msgstr "Toto pole popisuje zaƙízení"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "Chcete povolit tisk na tiskĂĄrnĂĄch vypsanĂœch vĂœĆĄe?\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
msgstr ""
-"Frekvence CPU v MHz (Megahertz je hodnota pƙibliĆŸně rovna vypočtenĂ©mu počtu "
-"instrukcí, které je schopen procesor provést za sekundu)"
+"Aby toto správně pracovalo se serverem W2K PDC, bude muset správce serveru "
+"spustit: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" "
+"everyone / add a restartovat server.\n"
+"Budete takĂ© potƙebovat uĆŸivatelskĂ© jmĂ©no a heslo SprĂĄvce DomĂ©ny, abyste "
+"mohli pƙipojit počítač do domĂ©ny Windows(TM).\n"
+"JestliĆŸe jeĆĄtě nenĂ­ povolena sĂ­Ć„, aplikace DrakX se pokusĂ­ pƙipojit k domĂ©ně "
+"po fázi nastavení sítě.\n"
+"PakliĆŸe toto nastavenĂ­ z jakĂ©hokoli dĆŻvodu selĆŸe, a ověƙenĂ­ na PDC nebude "
+"pracovat sprĂĄvně, spusĆ„te po naběhnutĂ­ systĂ©mu 'smbpasswd -j DOMAIN -U USER%%"
+"PASSWORD' (pouĆŸijte svou domĂ©nu Windows(TM) a uĆŸivatelskĂ© jmĂ©no a heslo "
+"Språvce domény).\n"
+"Pƙíkaz 'wbinfo -t' otestuje, zda-li vaĆĄe tajnĂ© informace pro ověƙenĂ­ jsou "
+"språvné."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Frequency (MHz)"
-msgstr "Frekvence (MHz)"
+msgid "%s (Port %s)"
+msgstr "%s (Port %s)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
-msgstr "Úroveƈ, kterou lze získat po provedení instrukce cpuid"
+msgid "Use network connection to backup"
+msgstr "PouĆŸĂ­t sĂ­Ć„ovĂ© pƙipojenĂ­ pro zĂĄlohovĂĄnĂ­"
-#: ../../standalone/harddrake2:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Cpuid level"
-msgstr "Cpuid Ășroveƈ"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
+msgstr ""
+"Argumenty: (arg)\n"
+"\n"
+"PovolĂ­/ZakĂĄĆŸe sulogin(8) v jednouĆŸivatelskĂ©m reĆŸimu."
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
+"V tĂ©to chvĂ­li je moĆŸnĂ© vybrat, kterĂ© programy chcete nainstalovat na vĂĄĆĄ "
+"systém.\n"
+"Mandrake Linux obsahuje tisíce balíčkƯ s programy a pro snadnějơí orientaci\n"
+"byly rozděleny do skupin, kterĂ© sdruĆŸujĂ­ podobnĂ© aplikace.\n"
+"\n"
+"Balíčky jsou rozděleny do skupin, kterĂ© odpovĂ­dajĂ­ tomu, jak je nejčastěji\n"
+"počítač pouĆŸĂ­vĂĄn. Skupiny samotnĂ© jsou umĂ­stěny do čtyƙ sekcĂ­. VĂœběr "
+"aplikacĂ­\n"
+"z těchto sekcĂ­ lze rĆŻzně kombinovat, takĆŸe mĆŻĆŸete mĂ­t celou instalovĂĄnu "
+"sekci\n"
+"\"PracovnĂ­ stanice\" a k nĂ­ nějakĂ© aplikace ze sekce \"VĂœvoj\".\n"
+"\n"
+" * \"PracovnĂ­ stanice\": pokud plĂĄnujete pouĆŸĂ­vat počítač pƙevĂĄĆŸně na\n"
+"bÄ›ĆŸnou prĂĄci, vyberte si z dalĆĄĂ­ch skupin odpovĂ­dajĂ­cĂ­ balíčky.\n"
+"\n"
+" * \"VĂœvoj\": pokud budete na počítači programovat, mĆŻĆŸete si z tĂ©to\n"
+"sekce vybrat dalĆĄĂ­ skupiny.\n"
+"\n"
+" * \"Server\": pokud bude počítač provozovĂĄn jako server, mĂĄte moĆŸnost\n"
+"vybrat si ty nejbÄ›ĆŸnějĆĄĂ­ sluĆŸby, kterĂ© chcete nainstalovat.\n"
+"\n"
+" * \"GrafickĂĄ prostƙedĂ­\": pokud preferujete grafickĂ© prostƙedĂ­, zde je\n"
+"nabĂ­dka několika prostƙedĂ­, ze kterĂ© si musĂ­te vybrat nejmĂ©ně jedno,\n"
+"aby bylo moĆŸnĂ© grafickĂ© prostƙedĂ­ nainstalovat.\n"
+"\n"
+"Pokud pƙejedete myĆĄĂ­ nad skupinou, objevĂ­ se krĂĄtkĂœ text, kterĂœ vysvětluje,\n"
+"co je obsahem danĂ© skupiny. Pokud nevyberete pƙi instalaci ĆŸĂĄdnou skupinu,\n"
+"zobrazí se otázka na instalaci několika typƯ minimální instalace:\n"
+"\n"
+" * \"Podpora X\" Provede instalaci minimální podpory pro prostƙedí X-"
+"Window.\n"
+"\n"
+" * \"Se zåkladní dokumentací\" Nainstaluje systém se zåkladními programy a\n"
+"jejich dokumentacĂ­. Tento typ je vhodnĂœ pro instalaci serveru.\n"
+"\n"
+" * \"Minimålní instalace\" Nainstaluje se opravdu nezbytné minimum, aby "
+"bylo\n"
+"moĆŸnĂ© provozovat Linux z pƙíkazovĂ© ƙádky. Instalace zabere asi 65MB.\n"
+"\n"
+"Pokud zatrhnete volbu \"VlastnĂ­ vĂœběr balíčkĆŻ\", zobrazĂ­ se seznam vĆĄech\n"
+"balíčkĆŻ, kterĂ© je moĆŸno nainstalovat. To je to uĆŸitečnĂ© v pƙípadě, ĆŸe "
+"chcete\n"
+"mĂ­t absolutnĂ­ kontrolu nad tĂ­m, co se bude instalovat.\n"
+"\n"
+"Pokud jste spustili instalaci v reĆŸimu \"Aktualizace\", mĆŻĆŸete zruĆĄit vĂœběr\n"
+"danĂœch skupin, čímĆŸ zabrĂĄnĂ­te instalaci novĂœch balíčkĆŻ. To je uĆŸitečnĂ©\n"
+"pro pƙípad opravy nebo aktualizace existujĂ­cĂ­ho systĂ©mu."
+
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
-msgstr "Rodina pro cpu (napƙ. 6 pro i686 tƙídu)"
+msgid "Accept user"
+msgstr "Vytvoƙit uĆŸivatele"
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, c-format
-msgid "Cpuid family"
-msgstr "Rodina CPU"
+msgid "Server"
+msgstr "Server"
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr "Zda má cpu chybu čárky Cyrix 6x86"
+msgid "Bad choice, try again\n"
+msgstr "Ć patnĂĄ volba, zkuste to znovu\n"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Coma bug"
-msgstr "Chyba čárky"
+msgid "Heard and McDonald Islands"
+msgstr "Heard a McDonaldovy ostrovy"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
-"speciální schopnosti zaƙízení (schopnost vypalování a/nebo podpora DVD)"
+msgid "No alternative driver"
+msgstr "Bez alternativního ovladače"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Drive capacity"
-msgstr "Kapacita zaƙízení"
+msgid "Toggle to expert mode"
+msgstr "Pƙepnout se do módu 'expert'"
-#: ../../standalone/harddrake2:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Size of the (second level) cpu cache"
-msgstr "Velikost cache (druhĂĄ Ășroveƈ) na cpu"
+msgid "(on this machine)"
+msgstr "(na tomto počítači)"
-#: ../../standalone/harddrake2:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Cache size"
-msgstr "Velikost vyrovnávací paměti"
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "Adresa brĂĄny by měla bĂœt ve tvaru 1.2.3.4"
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
#, c-format
msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+"\"%s\" based winmodem detected, do you want to install needed software ?"
msgstr ""
-"- zaƙízenĂ­ PCI: udĂĄvĂĄ slot PCI, zaƙízenĂ­ a funkci tĂ©to karty\n"
-"- zaƙízení EIDE: zaƙízení je buď master nebo slave\n"
-"- zaƙízení SCSI: udává ID sběrnice a zaƙízení SCSI"
+"byl detekovĂĄn win modem zaloĆŸenĂœ na \"%s\", chcete nainstalovat potƙebnĂœ "
+"software ?"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Location on the bus"
-msgstr "Umístění na sběrnici"
+msgid "Looking at packages already installed..."
+msgstr "ProhledĂĄvĂĄm jiĆŸ instalovanĂ© balíčky..."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+msgid "Use Differential Backups"
msgstr ""
-"- zaƙízení PCI a USB: vypisuje se dodavatel, zaƙízení, subdodavatel a "
-"podzaƙízení (ID PCI/USB)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Bus identification"
-msgstr "Identifikace sběrnice"
+msgid "Driver"
+msgstr "Ovladač"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
msgstr ""
-"GNU/Linux jĂĄdro potƙebuje spustit vĂœpočetnĂ­ smyčku pƙi spuĆĄtěnĂ­ pro "
-"inicializaci čítače hodin. VĂœsledek je uloĆŸen v proměnnĂ© BogoMIPS jako "
-"takovĂœ \"benchmark\" pro cpu."
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Bogomips"
-msgstr "BogoMIPS"
+"LinuxConf provĂĄdĂ­ rĆŻznĂ© Ășkoly pƙi spuĆĄtěnĂ­ systĂ©mu\n"
+"nutné pro språvu systémové konfigurace."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "KanĂĄl EIDE/SCSI"
+msgid "Printer on remote lpd server"
+msgstr "TiskĂĄrna na vzdĂĄlenĂœ lpd serveru"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Channel"
-msgstr "KanĂĄl"
+msgid ""
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
+msgstr ""
+"Pƙed instalacĂ­ fontĆŻ se ujistěte, ĆŸe mĂĄte potƙebnĂĄ prĂĄva na instalacĂ­ a "
+"pouĆŸĂ­vĂĄnĂ­ na systĂ©mu.\n"
+"\n"
+"- Fonty lze instalovat bÄ›ĆŸnĂœm zpĆŻsobem. Ve vĂœjimečnĂœch pƙípadech mĆŻĆŸe ĆĄpatnĂœ "
+"font zpĆŻsobit zamrznutĂ­ X serveru."
-#: ../../standalone/harddrake2:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
msgstr ""
-"toto je fyzická sběrnice, na kterou je pƙipojeno zaƙízení (napƙ. PCI, "
-"USB, ...)"
+"Yaboot je zavaděč pro počítače Macintosh. UmoĆŸĆˆuje spouĆĄtět jak GNU/Linux, "
+"MacOS tak i MacOSX, pokud jsou na počítači nainstalovány. Ve větơině\n"
+"pƙípadĆŻ jsou tyto operačnĂ­ systĂ©my sprĂĄvně detekovĂĄny. Pokud nejsou, mĆŻĆŸete\n"
+"zde na tĂ©to obrazovce pƙidat zĂĄznamy ručně. Dejte si ale pozor na sprĂĄvnou\n"
+"volbu parametrĆŻ.\n"
+"\n"
+"Yaboot mĂĄ tyto hlavnĂ­ volby:\n"
+"\n"
+" * Úvodní hláơka: jednoduchá textová zpráva, která je zobrazena pƙed "
+"vĂœzvou.\n"
+"\n"
+" * SpouĆĄtěcĂ­ zaƙízenĂ­: udĂĄvĂĄ mĂ­sto, kde jsou informace potƙebnĂ© pro "
+"spuơtění\n"
+"GNU/Linuxu. Obyčejně je to bootstrap oddĂ­l, kterĂœ byl vytvoƙen jiĆŸ pƙedtĂ­m.\n"
+"\n"
+" * Prodleva pro Firmware: na rozdíl od zavaděče LILO jsou zde dvě prodlevy.\n"
+"PrvnĂ­ prodleva v sekundĂĄch umoĆŸĆˆuje zvolit mezi spuĆĄtěnĂ­m CD, OF boot,\n"
+"MacOS nebo Linuxu.\n"
+"\n"
+" * Prodleva pro jádro: tato prodleva je podobná prodlevě pro LILO.\n"
+"UdĂĄvĂĄ v nĂĄsobcĂ­ch 0,1 vteƙiny jak dlouho se čekĂĄ, neĆŸ se zavede \n"
+"vĂœchozĂ­ jĂĄdro.\n"
+"\n"
+" * Povolit spuĆĄtěnĂ­ z CD?: tato volba dovoluje pouĆŸĂ­t \"C\" pro spuĆĄtěnĂ­ "
+"CD.\n"
+"\n"
+" * Povolit OF Boot?: tato volba dovoluje pouĆŸĂ­t \"N\" pro spuĆĄtěnĂ­ Open "
+"Firm.\n"
+"\n"
+" * VĂœchozĂ­ OS: vyberte vĂœchozĂ­ OS, kterĂœ se spustĂ­ po uplynutĂ­ prodlevy."
-#: ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Bus"
-msgstr "Sběrnice"
+msgid "No mouse"
+msgstr "Bez myĆĄi"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "seznam alternativních ovladačƯ pro vaơi zvukovou kartu"
+msgid "Germany"
+msgstr "Německo"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Alternative drivers"
-msgstr "Alternativní ovladače"
+msgid "Austria"
+msgstr "Rakousko"
-#: ../../standalone/keyboarddrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Chcete, aby se klĂĄvesa Backspace chovala v konzoli jako Delete?"
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr "Pro nastavení zvukové karty spusƄte po instalaci \"sndconfig\"."
-#: ../../standalone/keyboarddrake:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "JakĂ© je rozloĆŸenĂ­ vaĆĄĂ­ klĂĄvesnice?"
+msgid "Collapse Tree"
+msgstr "Sbalit větev"
-#: ../../standalone/livedrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Nelze spustit aktualizaci na bÄ›ĆŸĂ­cĂ­ systĂ©m !!!\n"
+msgid "Auto Install Configurator"
+msgstr "Nastavení automatické instalace"
-#: ../../standalone/livedrake:1
+#: ../../steps.pm:1
#, c-format
+msgid "Configure networking"
+msgstr "NastavenĂ­ sĂ­tĂ­"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Where do you want to install the bootloader?"
+msgstr "Kam chcete nainstalovat zaváděcí program?"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
msgstr ""
-"VloĆŸte prosĂ­m InstalačnĂ­ CD-ROM do mechaniky a stiskněte Ok.\n"
-"Pokud CD nemĂĄte, stiskněte ZruĆĄit pro pƙeruĆĄenĂ­ aktualizace systĂ©mu."
+"VĂœběr preferovanĂ©ho jazyka ovlivƈuje dokumentaci, jazyk instalačnĂ­ho "
+"programu\n"
+"a vĆĄech programĆŻ obecně. V prvnĂ­m kroku si vyberete region kde ĆŸijete\n"
+"a potom jazyk kterĂœm mluvĂ­te.\n"
+"\n"
+"Tlačítko \"RozơíƙenĂ©\" umoĆŸĆˆuje zvolit dalĆĄĂ­ jazyky, kterĂ© budou takĂ©\n"
+"nainstalovĂĄny a mĆŻĆŸete je pouĆŸĂ­t v systĂ©mu. VĂœběrem dalĆĄĂ­ch jazykĆŻ "
+"nainstalujete\n"
+"soubory s aplikacemi a dokumentací specifické pro tyto jazyky. Pokud "
+"napƙíklad\n"
+"na počítači pracujĂ­ občas lidĂ© ze Ć panělska, vyberte angličtinu jako hlavnĂ­\n"
+"jazyka pod tlačítkem rozơíƙenĂ© zatrhněte volbu \"Ć panělĆĄtina|Ć panělsko\".\n"
+"\n"
+"Pƙi vĂœběru jazyka nejste omezeni pouze na jedinĂœ dalĆĄĂ­. MĆŻĆŸete si jich "
+"vybrat\n"
+"vĂ­ce nebo dokonce nainstalovat vĆĄechny vybrĂĄnĂ­m volby \"VĆĄechny jazyky\".\n"
+"PƙídavnĂĄ volba \"PouĆŸĂ­t Unicode jako vĂœchozĂ­\" nastavuje celĂœ systĂ©m na\n"
+"pouĆŸĂ­vĂĄnĂ­ Unicode (UTF-8). ZatĂ­m je to ale experimentĂĄlnĂ­ volba. Pokud\n"
+"vyberete rĆŻznĂ© jazyky, kterĂ© vyĆŸadujĂ­ jinĂĄ kĂłdovĂĄnĂ­, bude i pƙesto podpora\n"
+"pro Unicode nainstalovĂĄna.\n"
+"\n"
+"Změnu rĆŻznĂœch jazykĆŻ instalovanĂœch v systĂ©mu lze provĂ©st pomocĂ­ pƙíkazu\n"
+"\"/usr/bin/localedrake\" spuĆĄtěnĂ©ho jako uĆŸivatel \"root\". SpuĆĄtěnĂ­ pod\n"
+"bÄ›ĆŸnĂœm uĆŸivatelem zpĆŻsobĂ­ změnu nastavenĂ­ pouze pro danĂ©ho uĆŸivatele.Lze "
+"takto doinstalovat více jazykƯ. Pokud máte jazyky vybrány, klikněte na \"OK"
+"\"\n"
+"a instalace bude pokračovat dalơím krokem."
-#: ../../standalone/livedrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Change Cd-Rom"
-msgstr "Vyměnit CD-ROM"
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr "Tato verze Mandrake Linux %s nepodporuje."
-#: ../../standalone/localedrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr "Změny jsou provedeny, ale pro aktivaci je nutnĂ© provĂ©st odhlĂĄĆĄenĂ­"
+msgid "DHCP client"
+msgstr "DHCP klient"
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Save as.."
-msgstr "UloĆŸit jako..."
+msgid "Restoring from file %s failed: %s"
+msgstr "Obnova ze souboru %s neuspěla: %s"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please enter your email address below "
-msgstr "Zadejte prosĂ­m nĂ­ĆŸe svou poĆĄtovnĂ­ adresu "
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech Mouse (sĂ©riovĂĄ, starĂœ C7 typ)"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "alert configuration"
-msgstr "nastavenĂ­ varovĂĄnĂ­"
+msgid "Are you sure that you want to set up printing on this machine?\n"
+msgstr "Opravdu chcete nastavit tisk na tomto počítači?\n"
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Pokud bude hodnota vetĆĄĂ­ neĆŸ zadanĂ© číslo, obdrĆŸĂ­te varovnou zprĂĄvu"
+msgid "New devfs device"
+msgstr "NovĂ© zaƙízenĂ­ devfs"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "load setting"
-msgstr "nahrĂĄt volby"
+msgid "ERROR: Cannot spawn %s."
+msgstr "CHYBA: Nelze spustit pƙíkaz %s."
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr "Pokud jedna z vybranĂœch sluĆŸeb nepobÄ›ĆŸĂ­, obdrĆŸĂ­te varovnou zprĂĄvu"
+msgid "Boot Style Configuration"
+msgstr "Nastavení stylu zavádění"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Automatic time synchronization"
+msgstr "Automatická synchronizace času (pomocí NTP)"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "service setting"
-msgstr "nastavenĂ­ sluĆŸeb"
+msgid "Backup files not found at %s."
+msgstr "Souboru pro zĂĄlohu z %s nenalezeny."
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Xinetd Service"
-msgstr "SluĆŸba Xinetd"
+msgid "Thank you for choosing Mandrake Linux 9.1"
+msgstr "Děkujeme vĂĄm, ĆŸe jste si vybrali Mandrake Linux 9.1"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Webmin Service"
-msgstr "SluĆŸba Webmin"
+msgid "Armenian (phonetic)"
+msgstr "Arménské (foneticky)"
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "SSH Server"
-msgstr "Server SSH"
+msgid "Card model:"
+msgstr "Model karty :"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Samba Server"
-msgstr "Server Samba"
+msgid "Thin Client"
+msgstr "TenkĂœ klient"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Postfix Mail Server"
-msgstr "PoĆĄtovnĂ­ server Postfix"
+msgid "Start Server"
+msgstr "Spustit server"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ftp Server"
-msgstr "Server FTP"
+msgid "Turkmenistan"
+msgstr "TurkmenistĂĄn"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Domain Name Resolver"
-msgstr "Dekodér nåzvu domény"
+msgid "All remote machines"
+msgstr "VĆĄechny vzdĂĄlenĂ© počítače"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "Server pro World Wide Web Apache"
+msgid "Install themes"
+msgstr "Instalovat témata"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
msgstr ""
-"Vítejte v nastavení elektronické poƥty.\n"
-"\n"
-"Zde lze nastavit systĂ©m posĂ­lĂĄnĂ­ varovnĂœch zprĂĄv.\n"
-
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "Mail alert configuration"
-msgstr "NastavenĂ­ varovnĂœch zprĂĄv e-mailem"
+" aktualizace 2002 MandrakeSoft od Stewa Benedicta <sbenedict\\@mandrakesoft."
+"com>"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "Mail alert"
-msgstr "Varovné zpråvy e-mailem"
+msgid "Espanol"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "čekejte prosím, zpracovávám soubor: %s"
+msgid "Preparing installation"
+msgstr "Pƙipravuji instalaci"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Content of the file"
-msgstr "Obsah souboru"
+msgid "Edit selected host/network"
+msgstr "Upravit vybranĂœ počítač/sĂ­Ć„"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Calendar"
-msgstr "Kalendáƙ"
+msgid "Add User -->"
+msgstr "Pƙidat uĆŸivatele -->"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose file"
-msgstr "Vyberte soubor"
+msgid "Nauru"
+msgstr "Nauru"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "but not matching"
-msgstr "neshodnĂœch"
+msgid "True Type fonts installation"
+msgstr "Instalace pĂ­sem True Type"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "matching"
-msgstr "shodnĂœch"
+msgid "Auto-detect printers connected directly to the local network"
+msgstr "Automaticky nalĂ©zt tiskĂĄrny pƙipojenĂ© pƙímo k lokĂĄlnĂ­ sĂ­ti"
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Settings"
-msgstr "NastavenĂ­"
+msgid "LAN configuration"
+msgstr "NastavenĂ­ LAN"
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "A tool to monitor your logs"
-msgstr "NĂĄstroj na sledovĂĄnĂ­ logĆŻ"
+msgid "hard disk model"
+msgstr "model pevného disku"
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "search"
-msgstr "vyhledat"
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "Nelze pouĆŸĂ­t LVM LogickĂ©ho disku na pƙipojenĂœ bod %s"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Mandrake Tools Explanation"
-msgstr "Vysvětlivky nástrojƯ Mandrake Linuxu"
+msgid "Get Windows Fonts"
+msgstr "Načíst fonty z Windows"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Syslog"
-msgstr "Syslog"
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Messages"
-msgstr "ZprĂĄvy"
+msgid "Iranian"
+msgstr "ÍrĂĄnskĂ©"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "User"
-msgstr "UĆŸivatel"
+msgid "Croatia"
+msgstr "Chorvatsko"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "/Help/_About..."
-msgstr "/Nápověda/_O aplikaci..."
+msgid "Gateway:"
+msgstr "BrĂĄna(gateway):"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Options/Test"
-msgstr "/Volby/Test"
+msgid "Add server"
+msgstr "Pƙidat server"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/File/-"
-msgstr "/Soubor/-"
+msgid "Remote printer name"
+msgstr "Nåzev vzdålené tiskårny"
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "/File/Save _As"
-msgstr "/Soubor/UloĆŸit _jako"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together in order to highly reduce hacking risks."
+msgstr ""
+"MandrakeSoft navrhl exkluzivní nástroje pro tvorbu dosud nejbezpečnějơí "
+"verze Linuxu: DrakSec, nĂĄstroj pro sprĂĄvu bezpečnosti systĂ©mu, a silnĂœ "
+"firewall, kterĂ© spolu spolupracujĂ­ a do značnĂ© mĂ­ry omezujĂ­ riziko "
+"nepƙátelskĂ©ho prĆŻniku."
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "<control>S"
-msgstr "<control>U"
+msgid "Device: "
+msgstr "Zaƙízení: "
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, c-format
-msgid "/File/_Save"
-msgstr "/Soubor/_UloĆŸit"
+msgid "Printerdrake"
+msgstr "PrinterDrake"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "<control>O"
-msgstr "<control>O"
+msgid "License agreement"
+msgstr "Souhlas s licencĂ­"
-#: ../../standalone/logdrake:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "/File/_Open"
-msgstr "/Soubor/_Otevƙít"
+msgid "System Options"
+msgstr "Systémové volby"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "<control>N"
-msgstr "<control>N"
+msgid "Please enter the directory where backups are stored"
+msgstr "Zadejte adresáƙ, kde jsou umístěny zálohy"
-#: ../../standalone/logdrake:1
+#: ../../security/level.pm:1
#, c-format
-msgid "/File/_New"
-msgstr "/Soubor/_NovĂœ"
+msgid "Please choose the desired security level"
+msgstr "Vyberte prosĂ­m poĆŸadovanou Ășroveƈ zabezpečenĂ­"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Show only for the selected day"
-msgstr "Zobrazit pouze pro vybranĂœ den"
+msgid "This host is already in the list, it cannot be added again.\n"
+msgstr "Tento počítač je jiĆŸ na seznamu, nelze jej tedy pƙidat dvakrĂĄt.\n"
-#: ../../standalone/mousedrake:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Emulate third button?"
-msgstr "Emulovat tƙetí tlačítko?"
+msgid ", USB printer"
+msgstr ", USB tiskĂĄrna"
-#: ../../standalone/mousedrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Please choose your mouse type."
-msgstr "Vyberte si typ vaĆĄi myĆĄi."
+msgid "Choose the applications that will support the fonts:"
+msgstr "Zvolte aplikace, které podporují fonty:"
-#: ../../standalone/net_monitor:1
+#: ../../steps.pm:1
#, c-format
-msgid "Connect %s"
-msgstr "Pƙipojit %s"
+msgid "Configure X"
+msgstr "NastavenĂ­ X"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Disconnect %s"
-msgstr "Odpojit %s"
+msgid "Turkish (traditional \"F\" model)"
+msgstr "TureckĂ© (tradičnĂ­ model \"F\")"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"VarovĂĄnĂ­, bylo detekovĂĄno jinĂ© pƙipojenĂ­ k Internetu, zƙejmě je pouĆŸita sĂ­Ć„"
+msgid "Congratulations!"
+msgstr "Gratuluji!"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "received"
-msgstr "pƙijato"
+msgid "Use owner id for execution"
+msgstr "PouĆŸĂ­t pƙi spuĆĄtěnĂ­ ID vlastnĂ­ka"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "transmitted"
-msgstr "pƙeneseno"
+msgid "Down"
+msgstr "DolĆŻ"
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "received: "
-msgstr "pƙijato: "
+msgid "Raw printer (No driver)"
+msgstr "PƙímĂœ tisk (bez ovladače)"
-#: ../../standalone/net_monitor:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "sent: "
-msgstr "odeslĂĄno: "
+msgid "Install rpm"
+msgstr "Instalovat rpm"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Local measure"
-msgstr "Lokální měƙítko"
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
+msgstr ""
+"Vytisknout soubor z pƙíkazovĂ© ƙádky (terminĂĄlovĂ©ho okna) lze buď pƙíkazem\n"
+"\"%s<soubor>\" nebo pƙes grafickĂ© nĂĄstroje: \"xpp <soubor> nebo \"kprinter "
+"<soubor>\". GrafickĂ© nĂĄstroje umoĆŸĆˆujĂ­ jednoduĆĄe vybrat tiskĂĄrny a měnit "
+"jejich parametry.\n"
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "average"
-msgstr "prƯměr"
+msgid "Time remaining "
+msgstr "ZbĂœvajĂ­cĂ­ čas "
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Color configuration"
-msgstr "NastavenĂ­ barev"
+msgid "UK keyboard"
+msgstr "UK-Britské"
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
-"Pƙipojení selhalo.\n"
-"Ověƙte nastavení v ovládacím centru Mandrake."
+msgid "Unmount"
+msgstr "Odpojit"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Connection complete."
-msgstr "Pƙipojení ukončeno."
+msgid "Uninstall Fonts"
+msgstr "Odinstalovat fonty"
-#: ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Disconnection from the Internet complete."
-msgstr "Odpojení z Internetu ukončeno."
+msgid "Microsoft Explorer"
+msgstr "Microsoft Explorer"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Disconnection from the Internet failed."
-msgstr "OdpojenĂ­ z Internetu selhalo."
+msgid "German (no dead keys)"
+msgstr "NěmeckĂ© (bez mrtvĂœch klĂĄves)"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Connecting to the Internet "
-msgstr "Pƙipojení k Internetu"
+msgid "Transferring %s..."
+msgstr "Pƙenáơím %s ..."
-#: ../../standalone/net_monitor:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Disconnecting from the Internet "
-msgstr "OdpojenĂ­ z Internetu "
+msgid "32 thousand colors (15 bits)"
+msgstr "32 tisĂ­c barev (15 bitĆŻ)"
-#: ../../standalone/net_monitor:1
+#: ../../any.pm:1
#, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Čekejte prosím, testuji pƙipojení..."
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
+msgstr ""
+"NynĂ­ lze provĂ©st export pƙes protokol NFS nebo Samba. Vyberte prosĂ­m, kterĂœ "
+"chcete pouĆŸĂ­t."
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Logs"
-msgstr "Logy"
+msgid "Reboot"
+msgstr "Restartovat"
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connection Time: "
-msgstr "Doba pƙipojení: "
+msgid "Gambia"
+msgstr "Gambie"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Receiving Speed:"
-msgstr "Rychlost na pƙíjmu:"
+msgid "Mandrake Control Center"
+msgstr "OvlĂĄdacĂ­ centrum Mandrake"
-#: ../../standalone/net_monitor:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Sending Speed:"
-msgstr "OdchozĂ­ rychlost:"
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
+msgstr ""
+"Zadali jste nesprĂĄvnĂœ port.\n"
+"Správně je napƙíklad: 139/tcp 139/udp.\n"
+"VĂ­ce se dozvĂ­te ze souboru /etc/services."
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid "Statistics"
-msgstr "Statistiky"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
+msgstr ""
+"Monitor\n"
+"\n"
+" InstalačnĂ­ program dokĂĄĆŸe větĆĄinou automaticky detekovat a sprĂĄvně \n"
+"nastavit monitor pƙipojenĂœ k vaĆĄemu počítači. Pokud se to nezdaƙí, lze se\n"
+"seznamu vybrat monitor, kterĂœ mĂĄte."
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Profile "
-msgstr "Profil "
+msgid "\t-Tape \n"
+msgstr "\t-PĂĄska \n"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakhelp:1
#, c-format
-msgid "Network Monitoring"
-msgstr "Monitorování sítě"
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
+msgstr ""
+"V systĂ©mu nenĂ­ instalovĂĄn ĆŸĂĄdnĂœ prohlĂ­ĆŸeč. Pokud chcete pouĆŸĂ­vat nĂĄpovědu, "
+"je nutnĂ© nějakĂœ nainstalovat."
-#: ../../standalone/printerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Reading data of installed printers..."
-msgstr "NačítĂĄm data z instalovanĂœch tiskĂĄren..."
+msgid "Remember this password"
+msgstr "Pamatovat si heslo"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Name/IP address of host:"
-msgstr "Název/IP adresa počítače:"
+msgid "Internet Connection Sharing is now enabled."
+msgstr "SdĂ­lenĂ­ InternetovĂ©ho pƙipojenĂ­ je nynĂ­ zapnuto."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr "Tento počítač je jiĆŸ na seznamu, nelze jej tedy pƙidat dvakrĂĄt.\n"
+msgid "\t-Network by SSH.\n"
+msgstr "\t-Sítí pƙes SSH.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Scannerdrake"
-msgstr "Scannerdrake"
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
+msgstr ""
+" Pokud byla poĆŸadovanĂĄ tiskĂĄrna automaticky nalezena, vyberte ji jednoduĆĄe "
+"ze seznamu a pokud je to potƙeba, doplƈte uĆŸivatelskĂ© jmĂ©no, heslo, a "
+"pracovnĂ­ skupinu."
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Musíte zadat název počítače nebo IP adresu.\n"
+msgid "Use the free space on the Windows partition"
+msgstr "PouĆŸĂ­t volnĂ© mĂ­sto na Windows oddĂ­lu"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
-msgstr "Zvolte počítač, na kterĂ©m budou pƙístupnĂ© lokĂĄlnĂ­ skenery:"
+msgid "%s found on %s, configure it automatically?"
+msgstr "%s nalezeno na %s, chcete ho nastavit automaticky?"
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Sharing of local scanners"
-msgstr "SdĂ­lenĂ­ lokĂĄlnĂ­ch skenerĆŻ"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
+msgstr ""
+"Argumenty: (arg)\n"
+"\n"
+"PouĆŸije heslo pro autentizaci uĆŸivatelĆŻ."
-#: ../../standalone/scannerdrake:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "This machine"
-msgstr "Tento počítač"
+msgid "XFree86 driver: %s\n"
+msgstr "XFree86 ovladač: %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove selected host"
-msgstr "Odstranit vybranĂœ počítač"
+msgid "This host/network is already in the list, it cannot be added again.\n"
+msgstr "Tento počítač/sĂ­Ć„ je jiĆŸ na seznamu, nelze jej znova pƙidat.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Edit selected host"
-msgstr "Upravit vybranĂœ počítač"
+msgid ""
+"\n"
+" DrakBackup Report \n"
+"\n"
+msgstr ""
+"\n"
+" Report programu DrackBackup \n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add host"
-msgstr "Pƙidat počítač"
+msgid "Choose the packages you want to install"
+msgstr "Vyberte si balíčky, kterĂ© chcete nainstalovat"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr "Zde je seznam počítačƯ, ze kterĂœch je moĆŸnĂ© vyuĆŸĂ­t skenery: "
+msgid "Papua New Guinea"
+msgstr "Papua NovĂĄ Guinea"
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Usage of remote scanners"
-msgstr "PouĆŸitĂ­ vzdĂĄlenĂœch skenerĆŻ"
+msgid "Serbian (cyrillic)"
+msgstr "Srbské (cyrilice)"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "All remote machines"
-msgstr "VĆĄechny vzdĂĄlenĂ© počítače"
+msgid "Make kernel message quiet by default"
+msgstr "NevypisovĂĄnĂ­ hlĂĄĆĄek jĂĄdra nastavit jako vĂœchozĂ­"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
msgstr ""
-"Zde je seznam počítačƯ, na kterĂœch jsou pƙístupnĂ© lokĂĄlně pƙipojenĂ© skenery: "
+"Chcete opravdu nastavit tiskĂĄrnu \"%s\"\n"
+"jako vĂœchozĂ­?"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Use the scanners on hosts: "
-msgstr "PouĆŸĂ­t skenery na počítači: "
+msgid "The DHCP end range"
+msgstr "Konec pĂĄsma adres DHCP"
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Use scanners on remote computers"
-msgstr "PouĆŸĂ­t skenery na vzdĂĄlenĂ©m počítači"
+msgid "Creating bootdisk..."
+msgstr "Vytváƙím startovací disketu"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Sdílet skener pro počítače: "
+msgid "Wait please, testing your connection..."
+msgstr "Čekejte prosím, testuji pƙipojení..."
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr "Skenery na tomto počítači jsou pƙístupnĂ© i pro vzdĂĄlenĂ© počítače"
+msgid "Bringing down the network"
+msgstr "Zastavuji sĂ­Ć„"
-#: ../../standalone/scannerdrake:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
-"Zde mĆŻĆŸete rozhodnout o tom, zda vzdĂĄleně pƙístupnĂ© skenery budou vyuĆŸitelnĂ© "
-"i na tomto počítači."
+msgid "Login ID"
+msgstr "PƙihlaĆĄovacĂ­ jmĂ©no"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
msgstr ""
-"Zde mĆŻĆŸete nastavit, zda skenery, co jsou pƙipojeny k tomuto počítači, mohou "
-"bĂœt vzdĂĄleně pƙístupnĂ© a takĂ© pƙesně z jakĂœch počítačƯ."
+"NFS je oblĂ­benĂœ protokol pro sdĂ­lenĂ­ souborĆŻ pƙes sĂ­tě TCP/IP.\n"
+"Tato sluĆŸba poskytuje moĆŸnost uzamykĂĄnĂ­ souborĆŻ na NFS."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Re-generating list of configured scanners ..."
-msgstr "Znovu generuji seznam nastavenĂœch skenerĆŻ..."
+msgid "DHCP Client"
+msgstr "DHCP klient"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Searching for new scanners ..."
-msgstr "Vyhledåvåm nové skenery ..."
+msgid "dismiss"
+msgstr "odmĂ­tnout"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for configured scanners ..."
-msgstr "Vyhledåvåm nastavené skenery ...."
+msgid "Printing/Scanning on \"%s\""
+msgstr "Tisk/SkenovĂĄnĂ­ na \"%s\""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Scanner sharing"
-msgstr "SdĂ­lenĂ­ skeneru"
+msgid "omit raid modules"
+msgstr "vynechat RAID moduly"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
-msgid "Add a scanner manually"
-msgstr "Pƙidat skener ručně"
+msgid ""
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
+msgstr ""
+"lpd je tiskovĂœ dĂ©mon, bez kterĂ©ho nebude fungovat lpr (program pro tisk).\n"
+"Je to server, kterĂœ posĂ­lĂĄ tiĆĄtěnĂ© dokumenty jednotlivĂœm tiskĂĄrnĂĄm."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Search for new scanners"
-msgstr "VyhledĂĄnĂ­ novĂœ skenerĆŻ"
+msgid "Internet Connection Configuration"
+msgstr "Konfigurace pƙipojení k internetu"
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr "Na vaĆĄem počítači nebyly nalezeny ĆŸĂĄdnĂ© pƙipojenĂ© skenery.\n"
+msgid "comma separated numbers"
+msgstr "čárkou oddělená čísla"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
msgstr ""
-"V tomto počítači je dostupnĂœ skener\n"
-"\n"
-"%s\n"
+"Pokud vyberete nějakĂ© zaƙízenĂ­, uvidĂ­te o něm informace v pravĂ©m rĂĄmci "
+"(\"Informace\")"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule up one level"
+msgstr "Posunout vybranĂ© pravidlo o Ășroveƈ vĂœĆĄe"
#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"The following scanners\n"
+"The following scanner\n"
"\n"
"%s\n"
-"are available on your system.\n"
+"is available on your system.\n"
msgstr ""
-"V tomto počítači jsou dostupnĂ© skenery\n"
+"V tomto počítači je dostupnĂœ skener\n"
"\n"
"%s\n"
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"VĂĄĆĄ skener %s byl nastaven.\n"
-"NynĂ­ lze skenovat dokumenty pomocĂ­ aplikace \"XSane\" z nabĂ­dky aplikacĂ­ "
-"Multimédia/Grafika."
-
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "choose device"
-msgstr "vyberte zaƙízení"
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "Chcete opravdu odebrat tiskĂĄrnu \"%s\"?"
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr "Vyberte prosĂ­m zaƙízenĂ­, ke kterĂ©mu je skener %s pƙipojen"
+msgid "I can't find any room for installing"
+msgstr "NemĆŻĆŸu najĂ­t ĆŸĂĄdnĂ© volnĂ© mĂ­sto pro instalaci"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for scanners ..."
-msgstr "VyhledĂĄvĂĄm skenery..."
+msgid "Default printer"
+msgstr "VĂœchozĂ­ tiskĂĄrna"
-#: ../../standalone/scannerdrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Auto-detect available ports"
-msgstr "Automaticky detekovat dostupné porty"
+msgid ""
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
+msgstr ""
+"Máte nastaveno více zpƯsobƯ, jak se pƙipojit k Internetu.\n"
+"Vyberte si jeden, kterĂœ chcete pouĆŸĂ­t.\n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr "(Pozn: ParalelnĂ­ porty nepouĆŸĂ­vajĂ­ autodetekci)"
+msgid "Modify RAID"
+msgstr "Změnit RAID"
-#: ../../standalone/scannerdrake:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
msgstr ""
-"Skener %s musĂ­ bĂœt nastaven pomocĂ­ nĂĄstroje PrinterDrake.\n"
-"Spustit PrinterDrake lze z ovlĂĄdacĂ­ho centra Mandrake v sekci Hardware"
+"NaĆĄel jsem ISDN PCI kartu, jejĂ­ĆŸ typ ale neznĂĄm. ProsĂ­m zvolte si jednu z "
+"nĂĄsledujĂ­cĂ­ho seznamu PCI karet."
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "The %s is unsupported"
-msgstr "Skener %s nenĂ­ podporovĂĄn"
+msgid "Add user"
+msgstr "Pƙidat uĆŸivatele"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr "Skener %s není zatím v této verzi Scannerdrake podporovån."
+msgid "RAID-disks %s\n"
+msgstr "RAID disky %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
-msgstr "Tato verze Mandrake Linux %s nepodporuje."
+msgid "Liberia"
+msgstr "Libérie"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Port: %s"
-msgstr "Port: %s"
+msgid ""
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
+msgstr ""
+"Zadejte prosĂ­m nĂĄzev rozhranĂ­, kterĂ© je pƙipojeno k Internetu.\n"
+"\n"
+"Pƙíklady:\n"
+"\t\tppp+ pro modem nebo pro DSL pƙipojení,\n"
+"\t\teth0 nebo eth1 pro pƙipojení pƙes kabel,\n"
+"\t\tippp+ pro isdn pƙipojení.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid ", "
-msgstr ", "
+msgid "Choose your keyboard"
+msgstr "VĂœběr klĂĄvesnice"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Detected model: %s"
-msgstr "Nalezen model: %s"
+msgid "Format partitions"
+msgstr "FormĂĄtovĂĄnĂ­ oddĂ­lĆŻ"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " ("
-msgstr " ("
+msgid "Automatic correction of CUPS configuration"
+msgstr "AutomatickĂĄ korekce nastavenĂ­ pro CUPS"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Select a scanner model"
-msgstr "Zvolte si model skeneru"
+msgid "Running \"%s\" ..."
+msgstr "SpouĆĄtĂ­m \"%s\" ..."
-#: ../../standalone/scannerdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr "%s není v databázi skenerƯ, nastavit ručně?"
+msgid "enable radio support"
+msgstr "Zapnout podporu rĂĄdia"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "%s nalezeno na %s, chcete ho nastavit automaticky?"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Hardware probing in progress"
-msgstr "ProbĂ­hĂĄ detekce hardware"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices were added:\n"
-msgstr "Byla pƙidána některá zaƙízení:\n"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "Některá zaƙízení v tƙídě hardware \"%s\" byla odstraněna:\n"
+msgid "Scanner sharing to hosts: "
+msgstr "Sdílet skener pro počítače: "
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
-msgstr ""
-"Úspěch společnosti MandrakeSoft je zaloĆŸen na principech SvobodnĂ©ho "
-"Software. Tento operačnĂ­ systĂ©m je vĂœsledkem spoluprĂĄce části celosvětovĂ© "
-"Linuxové komunity"
+msgid "Loopback file name: %s"
+msgstr "Loopback soubor: %s"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Welcome to the Open Source world."
-msgstr "Vítejte do světa Open Source"
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "Vyberte tiskovĂœ port, kam budou směrovĂĄny tiskovĂ© Ășlohy."
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr "Děkujeme vĂĄm, ĆŸe jste si vybrali Mandrake Linux 9.1"
+msgid "Do not transfer printers"
+msgstr "Nepƙenáơet tiskárny"
-#: ../../share/advertising/02-community.pl:1
-#, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
-msgstr ""
-"Chcete-li sdĂ­let svĂ© vědomosti a pomĂĄhat vytváƙet nĂĄstroje pro Linux, "
-"pƙipojte se do diskusnĂ­ch klubĆŻ, kterĂ© najdete na naĆĄich strĂĄnkĂĄch "
-"\"Community\""
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Delay before booting the default image"
+msgstr "Prodleva pƙed automatickĂœm spuĆĄtěnĂ­m"
-#: ../../share/advertising/02-community.pl:1
-#, c-format
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+" DUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
msgstr ""
-"Chcete vědět více o komunitě okolo Open Source? Pƙipojte se ke světu "
-"Svobodného Software!"
-
-#: ../../share/advertising/02-community.pl:1
-#, c-format
-msgid "Build the future of Linux!"
-msgstr "Tvoƙte budoucnost Linuxu!"
+"\n"
+" Copyright ©2001-2002 MandrakeSoft \n"
+"\tDUPONT Sebastien (pĆŻvodnĂ­ verze)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" Tento program je svobodnĂœ software; mĆŻĆŸete ho ơíƙit a/nebo modifikovat\n"
+" podle specifikace GNU General Public Licence, kterĂĄ byla publikovĂĄna\n"
+" Free Software Foundation; buď verze 2, nebo (podle volby) pozdějơí verze.\n"
+"\n"
+" Tento program je distribuovĂĄn s nadějĂ­, ĆŸe bude uĆŸitečnĂœ,\n"
+" ale BEZ JAKÝCHKOLIV ZÁRUK; BEZ NÁROKU NA PROFIT. Více detailƯ naleznete\n"
+" v licenci GNU General Public Licence.\n"
+"\n"
+" Kopii GNU General Public Licence mĆŻĆŸete obdrĆŸet buď s tĂ­mto programem\n"
+" nebo si o nĂ­ mĆŻĆŸete napsat na adresu Free Software Foundation, Inc.,\n"
+" 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Poděkování:\n"
+" - pfm2afm: \n"
+"\t autor Ken Borgendale:\n"
+"\t Pƙevádí Windows .pfm soubor na .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t autor James Macnicol: \n"
+"\t type1inst generuje soubory fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t autoƙi Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Pƙevádí soubory s ttf fonty na soubory afm a pfb\n"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
-msgstr ""
-"Mandrake Linux 9.1 vĂĄm dovoluje naplno vyuĆŸĂ­t poslednĂ­ software pro "
-"pƙehrávání hudebních souborƯ, editovat či pracovat s vaơimi obrázky nebo "
-"fotografiemi, či sledovat video."
+msgid "Please check for multisession CD"
+msgstr "Zvolte pokud pouĆŸĂ­vĂĄte multisession CD"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
-msgstr ""
-"ProhlĂ­ĆŸejte Web pomocĂ­ prohlĂ­ĆŸeče Mozilla nebo Konqueror, čtěte poĆĄtu s "
-"Evolution nebo KMail, tvoƙte svĂ© dokumenty s OpenOffice.Org."
+msgid "user"
+msgstr "uĆŸivatel"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr "MandrakeSoft pro vĂĄs vybral ten nejlepĆĄĂ­ software"
+msgid "Use Hard Disk to backup"
+msgstr "PouĆŸĂ­t pro zĂĄlohovĂĄnĂ­ pevnĂœ disk"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
-"Mandrake Linux 9.1 vĂĄm poskytuje OvlĂĄdacĂ­ centrum Mandrake, mocnĂœ nĂĄstroj "
-"pro plnĂ© pƙizpĆŻsobenĂ­ vaĆĄeho počítače vaĆĄim potƙebĂĄm. Nastavte a pƙizpĆŻsobte "
-"si prvky jako Ășroveƈ zabezpečenĂ­, pƙídavnĂĄ zaƙízenĂ­ (obrazovku, myĆĄ, "
-"klávesnici...), pƙipojení k Internetu a daleko více!"
+msgid "Configure"
+msgstr "Nastavit"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "VĂ­ceĂșčelovĂœ konfiguračnĂ­ nĂĄstroj Mandrake"
+msgid "Scannerdrake"
+msgstr "Scannerdrake"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
-msgstr ""
-"Bezvadně pƙizpĆŻsobte vĂĄĆĄ počítač vaĆĄim potƙebĂĄm dĂ­ky 11 uĆŸivatelskĂœm "
-"rozhraním, které jsou k dispozici v distribuci Mandrake Linux a které lze "
-"plně upravovat: KDE 3.1, GNOME 2.2, WindowMaker, ..."
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
+msgstr "VarovĂĄnĂ­, bylo detekovĂĄno jinĂ© pƙipojenĂ­ k Internetu, zƙejmě je to sĂ­Ć„"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A customizable environment"
-msgstr "PƙizpĆŻsobitelnĂ© prostƙedĂ­"
+msgid "Backup Users"
+msgstr "ZĂĄlohovat uĆŸivatele"
-#: ../../share/advertising/06-development.pl:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
msgstr ""
-"Tvoƙit a upravovat v rĆŻznĂœch jazycĂ­ch jako Perl, Python, C a C++ nebylo "
-"nikdy tak jednoduchĂ© dĂ­ky GNU gcc 3 a nejlepĆĄĂ­m vĂœvojovĂœm prostƙedĂ­m ze "
-"světa Open Source."
-
-#: ../../share/advertising/06-development.pl:1
-#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr "Distribuce Mandrake Linux 9.1 je nejlepĆĄĂ­ vĂœvojovĂĄ platforma."
+"Prosím zadejte název vaơeho počítače.\n"
+"Tento nĂĄzev musĂ­ bĂœt ĂșplnĂœ, jako 'mybox.mylab.myco.com'.\n"
+"Pokud pouĆŸĂ­vĂĄte brĂĄnu(gateway), mĆŻĆŸete takĂ© zadat jejĂ­ adresu"
-#: ../../share/advertising/07-server.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
-msgstr ""
-"VĂĄĆĄ počítač lze několika klepnutĂ­mi myĆĄi změnit na velmi vĂœkonnĂœ LinuxovĂœ "
-"server: webovĂœ server, poĆĄtovnĂ­ server, firewall, router, souborovĂœ a "
-"tiskovĂœ server, ..."
+msgid "Select Printer Spooler"
+msgstr "Zvolte tiskovĂœ systĂ©m pro tiskĂĄrnu"
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Turn your computer into a reliable server"
-msgstr "Vytvoƙte se svĂ©ho počítače spolehlivĂœ server."
+msgid "Create new theme"
+msgstr "Vytvoƙit novĂ© tĂ©ma"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
-msgstr ""
-"NĂĄĆĄ elektronickĂœ obchod nabĂ­zĂ­ ucelenou ƙadu naĆĄich LinuxovĂœch ƙeĆĄenĂ­, "
-"stejně jako speciální nabídky naơich produktƯ a dalơí \"lahƯdky\":"
+msgid "Mandrake Tools Explanation"
+msgstr "Vysvětlivky nástrojƯ Mandrake Linuxu"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "The official MandrakeSoft Store"
-msgstr "Oficiální obchod společnosti MandrakeSoft"
+msgid "No image found"
+msgstr "Obraz nebyl nalezen"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
msgstr ""
-"RozĆĄiƙte obzory svĂ©ho počítače s některĂœmi z ĆĄirokĂ© ƙady partnerĆŻ, kteƙí "
-"nabĂ­zejĂ­ profesionĂĄlnĂ­ sluĆŸby kompatibilnĂ­ s distribucĂ­ Mandrake Linux."
+"NěkterĂ© dĆŻleĆŸitĂ© balíčky nebyly sprĂĄvně nainstalovanĂ©.\n"
+"Je moĆŸnĂ©, ĆŸe je poĆĄkozen CD disk nebo CD-ROM mechanika.\n"
+"Zkontrolujete to pouĆŸitĂ­m pƙíkazu \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
-msgstr ""
-"ZĂ­skejte to nejlepĆĄĂ­ se StrategickĂœmi partnery distribuce Mandrake Linux"
+msgid "Detected model: %s"
+msgstr "Nalezen model: %s"
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakedm:1
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
-"MandrakeSoft navrhl exkluzivní nástroje pro tvorbu dosud nejbezpečnějơí "
-"verze Linuxu: DrakSec, nĂĄstroj pro sprĂĄvu bezpečnosti systĂ©mu, a silnĂœ "
-"firewall, kterĂ© spolu spolupracujĂ­ a do značnĂ© mĂ­ry omezujĂ­ riziko "
-"nepƙátelskĂ©ho prĆŻniku."
+"SprĂĄvce pƙihlĂĄĆĄenĂ­ pro X11 umoĆŸĆˆuje se pƙihlĂĄsit pƙes grafickĂ©\n"
+"rozhranĂ­ k beĆŸĂ­cĂ­mu systĂ©mu X Window a podporuje spuĆĄtěnĂ­ rĆŻznĂœch\n"
+"X sezení na lokálním počítači současně."
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Optimize your security by using Mandrake Linux"
-msgstr "Optimalizujte vaơe zabezpečení"
+msgid "if set to yes, run the daily security checks."
+msgstr "pokud je nastaveno, spouĆĄtĂ­ kaĆŸdĂœ den bezpečnostnĂ­ kontrolu."
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr "Tento produkt je k dispozici na webovĂœch strĂĄnkĂĄch MandrakeStore."
+msgid "Azerbaijan"
+msgstr "ÁzerbĂĄjdĆŸĂĄn"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
-msgstr ""
-"Dokončete vaĆĄe nastavenĂ­ bezpečnosti s tĂ­mto snadno pouĆŸitelnĂœm software, "
-"kterĂ© kombinuje velmi vĂœkonnĂ© komponenty jako firewall, server a klient "
-"virtuĂĄlnĂ­ soukromĂ© sĂ­tě (VPN), systĂ©m detekce prĆŻniku a sprĂĄvce provozu."
+msgid "No tape in %s!"
+msgstr "NenĂ­ pĂĄska v %s!"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr "Zabezpečte vaơe sítě s produktem Multi Network Firewall"
+msgid "Dvorak (US)"
+msgstr "Dvoƙák (US) "
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""
-"Pƙipojte se k tĂœmĆŻm podpory společnosti MandrakeSoft a on-line LinuxovĂ© "
-"komunitě, sdĂ­lejte svĂ© znalosti a pomozte ostatnĂ­m tĂ­m, ĆŸe se stanete "
-"uznĂĄvanĂœm Expertem na webovĂœch strĂĄnkĂĄch on-line technickĂ© podpory:"
+"toto je fyzická sběrnice, na kterou je pƙipojeno zaƙízení (napƙ. PCI, "
+"USB, ...)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr ""
-"Nalezněte ƙeĆĄenĂ­ vaĆĄich problĂ©mĆŻ pomocĂ­ on-line platformy společnosti "
-"MandrakeSoft pro podporu"
+msgid "How is the printer connected?"
+msgstr "Jak je tiskárna pƙipojena?"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Become a MandrakeExpert"
-msgstr "Staƈte se Mandrake Expertem"
+msgid "Security level"
+msgstr "Úroveƈ zabezpečení"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr ""
-"VĆĄechny incidenty budou sledovĂĄny vyhrazenĂœm kvalifikovanĂœm technickĂœm "
-"expertem společnosti MandrakeSoft."
+msgid "final resolution"
+msgstr "konečnĂ© rozliĆĄenĂ­"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr ""
-"Online platforma odpovĂ­dajĂ­cĂ­ specifickĂœm potƙebĂĄm podpory společnostĂ­."
+msgid "Services"
+msgstr "SluĆŸby"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "MandrakeExpert Corporate"
+msgid "4 MB"
+msgstr "4 MB"
#: ../../share/compssUsers:999
msgid "Office Workstation"
@@ -19444,10 +19482,6 @@ msgstr ""
"procesory (KSpread, Gnumeric), prohlĂ­ĆŸeče PDF a dalĆĄĂ­"
#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "PracovnĂ­ stanice"
-
-#: ../../share/compssUsers:999
msgid "Game station"
msgstr "Hry"
@@ -19520,10 +19554,6 @@ msgstr ""
"nĂĄstrojĆŻ"
#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "GrafickĂ© prostƙedĂ­"
-
-#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "PracovnĂ­ stanice s Gnome"
@@ -19544,10 +19574,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "IceWM, Window Maker, Enlightenment, Fvwm a dalĆĄĂ­"
#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "VĂœvoj"
-
-#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "Knihovny pro vĂœvoj v C a C++, programy a hlavičkovĂ© soubory"
@@ -19616,34 +19642,97 @@ msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr "NFS server, SMB server, Proxy server, SSH server"
#: ../../share/compssUsers:999
-msgid "Audio station"
-msgstr "PrĂĄce se zvukem"
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr ""
+"Kolekce nástrojƯ pro čtení a posílaní el. poơty a pƙíspěvkƯ do diskusních "
+"skupin a pro prohlĂ­ĆŸenĂ­ Webu"
-#: ../../share/compssUsers:999
-msgid "Sound playing/editing programs"
-msgstr "Programy pro pƙehrávání/editaci zvuku"
+#~ msgid "Internet connection & configuration"
+#~ msgstr "Nastavení a pƙipojení k internetu"
-#: ../../share/compssUsers:999
-msgid "Video station"
-msgstr "Video"
+#~ msgid "Configure the connection"
+#~ msgstr "Nastavit pƙipojení"
-#: ../../share/compssUsers:999
-msgid "Video playing programs"
-msgstr "Programy pro pƙehrávání videa"
+#~ msgid "Disconnect"
+#~ msgstr "Odpojit"
-#: ../../share/compssUsers:999
-msgid "Graphic station"
-msgstr "GrafickĂĄ stanice"
+#~ msgid "Connect"
+#~ msgstr "Pƙipojit"
-#: ../../share/compssUsers:999
-msgid "Graphics programs"
-msgstr "Grafické programy"
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "MĆŻĆŸete pƙekonfigurovat pƙipojenĂ­."
-#: ../../share/compssUsers:999
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr ""
-"Kolekce nástrojƯ pro čtení a posílaní el. poơty a pƙíspěvkƯ do diskusních "
-"skupin a pro prohlĂ­ĆŸenĂ­ Webu"
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "NemĆŻĆŸete se pƙipojit k Internetu nebo pƙekonfigurovat pƙipojenĂ­."
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "V současnosti nejste pƙipojeni k Internetu."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can disconnect or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "MĆŻĆŸete se odpojit nebo pƙekonfigurovat pƙipojenĂ­."
+
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "V současnosti jste pƙipojeni k Internetu"
+
+#~ msgid "files sending by FTP"
+#~ msgstr "soubory poslanĂ© pƙes FTP"
+
+#~ msgid "Use incremental backup (do not replace old backups)"
+#~ msgstr "PouĆŸĂ­t pƙírĆŻstkovou zĂĄlohu (nepƙepisovat starĆĄĂ­ zĂĄlohy)"
+
+#~ msgid "Relaunch 'lilo'"
+#~ msgstr "Znovu spustit 'lilo'"
+
+#~ msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+#~ msgstr "Provést initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+
+#~ msgid "Write %s"
+#~ msgstr "Zapsat %s"
+
+#~ msgid "Copy %s to %s"
+#~ msgstr "KopĂ­ruji %s do %s"
+
+#~ msgid "Backup %s to %s.old"
+#~ msgstr "ZĂĄlohuji %s do %s.old"
+
+#~ msgid "ttf fonts conversion"
+#~ msgstr "konverze ttf fontĆŻ"
+
+#~ msgid "Fonts conversion"
+#~ msgstr "Konverze fontĆŻ"
+
+#~ msgid "Author:"
+#~ msgstr "Autor:"
+
+#~ msgid "Audio station"
+#~ msgstr "PrĂĄce se zvukem"
+
+#~ msgid "Sound playing/editing programs"
+#~ msgstr "Programy pro pƙehrávání/editaci zvuku"
+
+#~ msgid "Video station"
+#~ msgstr "Video"
+
+#~ msgid "Video playing programs"
+#~ msgstr "Programy pro pƙehrávání videa"
+
+#~ msgid "Graphic station"
+#~ msgstr "GrafickĂĄ stanice"
+
+#~ msgid "Graphics programs"
+#~ msgstr "Grafické programy"
#~ msgid "Printer sharing"
#~ msgstr "SdĂ­lenĂ­ tiskĂĄrny"
@@ -19693,9 +19782,6 @@ msgstr ""
#~ msgid "GDI Laser Printer using the Zenographics ZJ-Stream Format"
#~ msgstr "LaserovĂĄ tiskĂĄrna GDI pouĆŸĂ­vajĂ­cĂ­ formĂĄt Zenographics ZJ-Stream"
-#~ msgid "%s"
-#~ msgstr "%s"
-
#~ msgid "Office"
#~ msgstr "Kanceláƙ"
@@ -19882,12 +19968,10 @@ msgstr ""
#~ "button\n"
#~ "to change it if necessary.\n"
#~ "\n"
-#~ " * \"Keyboard\": check the current keyboard map configuration and click "
-#~ "on\n"
+#~ " * \"%s\": check the current keyboard map configuration and click on\n"
#~ "the button to change that if necessary.\n"
#~ "\n"
-#~ " * \"Country\": check the current country selection. If you are not in "
-#~ "this\n"
+#~ " * \"%s\": check the current country selection. If you are not in this\n"
#~ "country, click on the button and choose another one.\n"
#~ "\n"
#~ " * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
@@ -20002,8 +20086,7 @@ msgstr ""
#~ "your machine. If you're not sure, you can check the list of hardware\n"
#~ "detected in your machine by selecting \"See hardware info \" and "
#~ "clicking\n"
-#~ "the \"Next ->\". Examine the list of hardware and then click on the "
-#~ "\"Next\n"
+#~ "the \"%s\". Examine the list of hardware and then click on the \"Next\n"
#~ "->\" button to return to the SCSI interface question.\n"
#~ "\n"
#~ "If you had to manually specify your PCI SCSI adapter, DrakX will ask if "
@@ -20062,8 +20145,7 @@ msgstr ""
#~ "your\n"
#~ "first experience with GNU/Linux.\n"
#~ "\n"
-#~ " * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice "
-#~ "for\n"
+#~ " * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
#~ "printing to your local printer or to one halfway around the planet. It "
#~ "is\n"
#~ "simple to configure and can act as a server or a client for the ancient\n"
@@ -20072,7 +20154,7 @@ msgstr ""
#~ "setup\n"
#~ "is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, "
#~ "make\n"
-#~ "sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
+#~ "sure to turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
#~ "front-ends for printing or choosing printer options and for managing the\n"
#~ "printer.\n"
#~ "\n"
@@ -20094,8 +20176,7 @@ msgstr ""
#~ "doporučeno\n"
#~ "pouĆŸĂ­t prĂĄvě tento tiskovĂœ systĂ©m.\n"
#~ "\n"
-#~ " * \"CUPS\"'Common Unix Printing System' je vynikajĂ­cĂ­ v tisku na "
-#~ "lokĂĄlnĂ­\n"
+#~ " * \"%s\"'Common Unix Printing System' je vynikajĂ­cĂ­ v tisku na lokĂĄlnĂ­\n"
#~ "tiskĂĄrny stejně jako pƙi tisku na tiskĂĄrnu na druhĂ© straně planety. "
#~ "NastavenĂ­\n"
#~ "je jednoduchĂ© a mĆŻĆŸe fungovat jako klient i server pro klienty z \"lpd\"\n"
@@ -20228,7 +20309,7 @@ msgstr ""
#~ "documentation, the installer and the system in general. Select first the\n"
#~ "region you are located in, and then the language you speak.\n"
#~ "\n"
-#~ "Clicking on the \"Advanced\" button will allow you to select other\n"
+#~ "Clicking on the \"%s\" button will allow you to select other\n"
#~ "languages to be installed on your workstation, thereby installing the\n"
#~ "language-specific files for system documentation and applications. For\n"
#~ "example, if you will host users from Spain on your machine, select "
@@ -20238,7 +20319,7 @@ msgstr ""
#~ "\n"
#~ "Note that you're not limited to choosing a single additional language. "
#~ "Once\n"
-#~ "you have selected additional locales, click the \"Next ->\" button to\n"
+#~ "you have selected additional locales, click the \"%s\" button to\n"
#~ "continue.\n"
#~ "\n"
#~ "To switch between the various languages installed on the system, you can\n"
@@ -20267,7 +20348,7 @@ msgstr ""
#~ "tlačítko \"Dalơí ->\" a instalace bude pokračovat dalơím krokem."
#~ msgid ""
-#~ "\"Country\": check the current country selection. If you are not in this\n"
+#~ "\"%s\": check the current country selection. If you are not in this\n"
#~ "country, click on the button and choose another one."
#~ msgstr ""
#~ "\"Země\": zkontrolujte aktuĂĄlnĂ­ vĂœběr země. Pokud neĆŸijete v tĂ©to zemi,\n"
@@ -20334,14 +20415,13 @@ msgstr ""
#~ msgid ""
#~ "There you are. Installation is now complete and your GNU/Linux system is\n"
-#~ "ready to use. Just click \"Next ->\" to reboot the system. The first "
-#~ "thing\n"
+#~ "ready to use. Just click \"%s\" to reboot the system. The first thing\n"
#~ "you should see after your computer has finished doing its hardware tests "
#~ "is\n"
#~ "the bootloader menu, giving you the choice of which operating system to\n"
#~ "start.\n"
#~ "\n"
-#~ "The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
+#~ "The \"%s\" button (in Expert mode only) shows two more buttons to:\n"
#~ "\n"
#~ " * \"generate auto-install floppy\": to create an installation floppy "
#~ "disk\n"
@@ -20852,9 +20932,6 @@ msgstr ""
#~ "Buďto pouĆŸijete LILO a nebude to fungovat, nebo nepouĆŸijete LILO a tedy "
#~ "nepotƙebujete /boot"
-#~ msgid "Upgrade"
-#~ msgstr "Aktualizovat"
-
#~ msgid "Do you want to configure another printer?"
#~ msgstr "Chcete nastavit dalĆĄĂ­ tiskĂĄrnu?"
diff --git a/perl-install/share/po/cy.po b/perl-install/share/po/cy.po
index 6e1ad2da9..7cffd8142 100644
--- a/perl-install/share/po/cy.po
+++ b/perl-install/share/po/cy.po
@@ -7,7 +7,7 @@
msgid ""
msgstr ""
"Project-Id-Version: DrakX-cy2\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
"PO-Revision-Date: 2003-03-12 19:36-0000\n"
"Last-Translator: Rhoslyn Prys <rhoslyn.prys@meddal.org.uk>\n"
"Language-Team: Cymraeg <rhoslyn.prys@meddal.org.uk>\n"
@@ -15,958 +15,1913 @@ msgstr ""
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Scanning partitions to find mount points"
+msgstr "Sganio rhaniadau i ganfod pwyntiau gosod"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of suid root files."
+msgstr ""
+"os wedi ei osod i iawn, , gwirio ychwanegu/tynnu ffeiliau gwraidd suid."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t\tErase=%s"
+msgstr "\t\tDileu=%s"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "network printer port"
+msgstr "porth argraffydd rhwydwaith"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Please insert floppy disk:"
+msgstr "Mewnosodwch ddisg meddal:"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "PCMCIA"
+msgstr "PCMCIA"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
+"The backup partition table has not the same size\n"
+"Still continue?"
msgstr ""
-"Mae'r rhannu yn ĂŽl defnyddiwr yn defnyddio grwp \"rhannu ffeiliau\" .\n"
-"Mae modd defnyddio userdrake i ychwanegu defnyddiwr i'r grwp. "
+"Nid yw'r tabl rhaniad wrth gefn yr un maint\n"
+"Parhau?"
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Cancel"
-msgstr "Diddymu"
+msgid "Which username"
+msgstr "Pa enw defnyddiwr"
#: ../../any.pm:1
#, c-format
-msgid "Launch userdrake"
-msgstr "Cychwyn userdrake"
+msgid "Which type of entry do you want to add?"
+msgstr "Pa fath o gofnod ydych chi eisiau ei ychwanegu?"
-#: ../../any.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Restore partition table"
+msgstr "Adfer y tabl rhaniad"
+
+#: ../../printer/cups.pm:1
+#, c-format
+msgid "On CUPS server \"%s\""
+msgstr "Ar wasanaethwr CUPS \"%s\""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Post-install configuration"
+msgstr "Ffurfweddiad ĂŽl osod"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``%s'' instead"
+msgstr "Defnyddiwch \"%s\" yn lle hynny"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Type"
+msgstr "Math"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
"\n"
-"\"Custom\" permit a per-user granularity.\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
msgstr ""
-"Hoffech chi ganiatĂĄu i rai defnyddwyr rannu eu cyfeiriaduron?\n"
-"Bydd caniatĂĄu hyn yn gadael i ddefnyddwyr glicio ar \"Rhannu\" yn konqueror "
-"a nautilus.\n"
"\n"
-"\"Addasu\" caniatĂĄu cyfran i'r defnyddwyr.\n"
+"Hefyd nid oes modd trosglwyddo argraffyddion ffurfweddwyd gyda ffeiliau PPD "
+"ddarparwyd gan eu gwneuthurwyr na gyrrwyr CUPS brodorol."
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Mae pecyn gorfodol %s ar goll"
+msgid "Sri Lanka"
+msgstr "Sri Lanka"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
-"Medrwch allforio gan ddefnyddio NFS neu Samba. Pa un hoffech chi ei "
-"ddefnyddio?"
+"Mae'r argraffydd canlynol\n"
+"\n"
+"%s%s\n"
+"wedi ei gysylltu'n uniongyrchol Ăą'ch system"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Rhaid i becyn %s gael ei osod. Ydych chi am ei osod?"
+msgid "Central African Republic"
+msgstr "Central African Republic"
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Custom"
-msgstr "Arddull"
+msgid "Gateway device"
+msgstr "Dyfais mynedfa"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Allow all users"
-msgstr "CaniatĂĄu pob defnyddiwr"
+msgid "Net Method:"
+msgstr "Dull Rhwyd:"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "No sharing"
-msgstr "Peidio rhannu"
+msgid "Ethernetcard"
+msgstr "Cerdyn Ethernet"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "More"
-msgstr "Rhagor"
+msgid "Parameters"
+msgstr "Paramedrau"
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Here is the full list of available countries"
-msgstr "Dyma restr lawn o'r gwledydd sydd ar gael"
+msgid "Auto-detect"
+msgstr "Awtoganfod"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please choose your country."
-msgstr "Dewiswch eich gwlad."
+msgid "Interface:"
+msgstr "Rhyngwyneb:"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid " / Region"
-msgstr "Reunion"
+#: ../../steps.pm:1
+#, c-format
+msgid "Select installation class"
+msgstr "Dewis dosbarth gosod"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Country"
-msgstr "Gwlad"
+msgid "on CDROM"
+msgstr "ar CDROM"
-#: ../../any.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "All languages"
-msgstr "Pob iaith"
+msgid ""
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
+msgstr ""
+"Nid yw'n ymddangos i'ch system gysylltu Ăą'r Rhyngrwyd.\n"
+"Ailffurfweddwch eich cysylltiad."
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use Unicode by default"
-msgstr "Defnyddio Unicode drwy rhagosodiad"
+msgid ""
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
+msgstr ""
+"Cysylltu eich argraffydd i wasanaethwr Linux a gadael i'ch peiriant/"
+"peiriannau Windows gysylltu iddo fel cleient.\n"
+"\n"
+"Ydych chi am barhau i osod yr argraffydd hwn?"
-#: ../../any.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Belarus"
+msgstr "Belarus"
+
+#: ../../partition_table.pm:1
+#, c-format
+msgid "Error writing to file %s"
+msgstr "Gwall wrth ysgrifennu i ffeil %s"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
msgstr ""
-"Gallwch ddewis ieithoedd eraill fydd ar gael ar ĂŽl gosod. Dewiswch\n"
-"pa iaith yr hoffech ei osod. Byddant ar gael pan fydd eich gosodiad\n"
-"wedi ei gwblhau a phan fyddwch yn ailgychwyn eich system."
+"Mae apmd yn cael ei ddefnyddio i fonitro statws y batri a mewngofnodi drwy\n"
+"syslog. Mae modd ei ddefnyddio i gau'r peiriant pan mae'r batri'n isel."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose a language to use."
-msgstr "Dewiswch iaith i'w defnyddio."
+msgid "Use tape to backup"
+msgstr "Defnyddiwch dĂąp i gadw wrth gefn"
-#: ../../any.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Choose the window manager to run:"
-msgstr "Dewiswch y rheolwr ffenestr i rhedeg:"
+msgid "The following packages are going to be installed"
+msgstr "Mae'r pecynnau canlynol i'w gosod"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the default user:"
-msgstr "Dewis y defnyddiwr rhagosodedig:"
+msgid "CUPS configuration"
+msgstr "Furfweddiad CUPS"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to use this feature?"
-msgstr "Ydych chi eisiau defnyddio'r nodwedd?"
+msgid "Hong Kong"
+msgstr "Hong Kong"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr "Mewngofnodi'n awtomatig ar gyfer un defnyddiwr."
+msgid "Not enough free space to allocate new partitions"
+msgstr "Nid oes digon o le i ddynodi rhaniadau newydd"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Autologin"
-msgstr "Awtomewngofnodi"
+msgid "Moving"
+msgstr "Symud"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Icon"
-msgstr "Eicon"
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
+msgstr ""
+"\n"
+"Gweithgaredd Drakbackup drwy %s:\n"
+"\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Shell"
-msgstr "Cragen"
+msgid "("
+msgstr "("
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Password (again)"
-msgstr "Cyfrinair (eto)"
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgstr ""
+"Croeso i Ddewin Ffurfweddu'r Rhwydwaith\n"
+"\n"
+"Rydym ar fin ffurfweddi eich cysylltiad rhyngrwyd/rhwydwaith.\n"
+"Os nad ydych am ddefnyddio awto ganfod, dad-diciwch y blwch dewis.\n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "Password"
-msgstr "Cyfrinair"
+msgid ")"
+msgstr ")"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "User name"
-msgstr "Enw defnyddiwr"
+msgid "Lebanon"
+msgstr "Lubanus"
-#: ../../any.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Real name"
-msgstr "Enw cywir"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Accept user"
-msgstr "Derbyn defnyddiwr"
+msgid "Stop"
+msgstr "Aros"
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Done"
-msgstr "Gorffen"
+msgid "Edit selected host"
+msgstr "Golygu'r gwesteiwr"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Rhowch enw defnyddiwr\n"
-"%s"
+msgid "No CD device defined!"
+msgstr "Heb ddiffinio dyfais CD!"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Add user"
-msgstr "Ychwanegu defnyddiwr"
+msgid "Bulgarian (phonetic)"
+msgstr "Bwlgaraidd (ffonetig)"
-#: ../../any.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "This user name has already been added"
-msgstr "Mae'r enw defnyddiwr wedi ei ychwanegu yn barod"
+msgid "The DHCP start ip"
+msgstr "Enw cychwyn DHCP"
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "The user name is too long"
-msgstr "Mae'r enw defnyddiwr yn rhy hir"
+msgid "256 kB"
+msgstr "256 kB"
#: ../../any.pm:1
#, c-format
+msgid "Bootloader main options"
+msgstr "Prif ddewisiadau Bootloader"
+
+#: ../../standalone.pm:1
+#, c-format
msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
msgstr ""
-"Rhaid i'r enw defnyddiwr gynnwys dim ond llythrennau bach, rhifau, '-' a '_'"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Please give a user name"
-msgstr "Rhowch enw defnyddiwr"
+msgid "Tape"
+msgstr "TĂąp"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This password is too simple"
-msgstr "Mae'r cyfrinair yn rhy syml"
+msgid "Scanning network..."
+msgstr "Chwilio'r rhwydwaith..."
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please try again"
-msgstr "Ceisiwch eto"
+msgid ""
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
+msgstr ""
+"Gyda'e dewis hwn medrwch adfer unrhyw fersiwn\n"
+"o'ch cyfeiriadur /etc."
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The passwords do not match"
-msgstr "Nid yw'r cyfrineiriau'n cydfynd"
+msgid "Malaysia"
+msgstr "Malaysia"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "(already added %s)"
-msgstr "(wedi ychwanegu %s yn barod)"
+msgid "Swiss (French layout)"
+msgstr "Swisaidd (gosodiad Ffrengig)"
-#: ../../any.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "access to compilation tools"
-msgstr "mynediad i offer crynhoad"
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "methodd mkraid (efallai bod raidtools ar goll)"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "access to network tools"
-msgstr "mynediad i offer rhwydwaith"
+msgid "Webcam"
+msgstr "Webcam"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "size of the (second level) cpu cache"
+msgstr "Maint storfa cpu (ail lefel)"
+
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "access to administrative files"
-msgstr "mynediad i ffeiliau gweinyddol"
+msgid "Soundcard"
+msgstr "Cerdyn sain"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "allow \"su\""
-msgstr "caniatĂĄu \"su\""
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
+msgstr ""
+"I argraffu ffeil o'r llinell orchymyn (ffenestr terfynnell) defnyddiwch "
+"orchymyn \"%s <file>\".\n"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "access to rpm tools"
-msgstr "mynediad i offer rpm"
+msgid "Level %s\n"
+msgstr "Lefel %s\n"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to X programs"
-msgstr "mynediad i raglenni X"
+msgid "Luxembourg"
+msgstr "Luxembourg"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"\n"
+" DrakBackup Daemon Report\n"
+"\n"
+"\n"
msgstr ""
-"Dyma'r cofnodion gwahanol ar eich dewislen cychwyn hyd yma.\n"
-"Mae modd i chi ychwanegu rhagor neu newid y rhai presennol."
+"\n"
+" Adroddiad Daemon DrakBackup \n"
+"\n"
+"\n"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other OS (windows...)"
-msgstr "Systemau gweithredu Eraill (windows...)"
+msgid "Iran"
+msgstr "Iran"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Systemau Gweithredu Eraill (MacOS...)"
+msgid "Bus"
+msgstr "Bws"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Systwmau Gweithredu eraill (SunOS..)"
+msgid "Iraq"
+msgstr "Irac"
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Linux"
-msgstr "Linux"
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr ""
+"Canfuwyd gwrthdaro posib yng nghyfeiriad LAN ffurfweddiad presennol %s!\n"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Pa fath o gofnod ydych chi eisiau ei ychwanegu?"
+msgid "Configuring..."
+msgstr "Ffurfweddu..."
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "This label is already used"
-msgstr "Mae'r label hwn yn cael ei ddefnyddio eisoes"
+msgid "The setup has already been done, and it's currently enabled."
+msgstr "Mae'r gosodiad wedi ei gyflawnu, mae wedi ei allluogi ar hyn o bryd."
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "You must specify a root partition"
-msgstr "Rhaid pennu rhaniad gwraidd"
+msgid ""
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
+msgstr ""
+"Ar gyfer y rhelyw o gardiau Teledu diweddar, mae modiwl bttv cnewyllyn GNU/"
+"Linux yn awto ganfod y paramedrau cywir.\n"
+"Os yw'ch cerdyn yn cael ei ganfod ar gam, mae modd gorfodi'r mathau cywir o "
+"gerdyn a rheolydd. Dewiswch baramedrau eich cerdyn teledu os oes raid"
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "You must specify a kernel image"
-msgstr "Rhaid enwi delwedd cnewyllyn"
+msgid "Password (again)"
+msgstr "Cyfrinair (eto)"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Empty label not allowed"
-msgstr "Nid yw label gwag yn cael ei ganiatĂĄu"
+msgid "Search installed fonts"
+msgstr "Chwilio am ffontiau wedi eu gosod"
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Default"
-msgstr "Rhagosodedig"
+msgid "Venezuela"
+msgstr "Venezuela"
-#: ../../any.pm:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "NoVideo"
-msgstr "NoVideo"
+msgid "IP address"
+msgstr "Cyfeiriad IP"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Initrd-size"
-msgstr "Maint intrd"
+msgid "Choose the sizes"
+msgstr "Dewiswch y maint"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Append"
-msgstr "Atodi"
+msgid ""
+"List of data corrupted:\n"
+"\n"
+msgstr ""
+"Rhestr o ddata llwgr:\n"
+"\n"
-#: ../../any.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Label"
-msgstr "Label"
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
+msgstr ""
+"Nid yw'r system yn cynnal eich modem.\n"
+"Ewch i http://www.linmodems.org"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Unsafe"
-msgstr "Anniogel"
+msgid "Choose another partition"
+msgstr "Dewiswch raniad arall"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Table"
-msgstr "Tabl"
+msgid "Current user"
+msgstr "Derbyn presennol"
-#: ../../any.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Root"
-msgstr "Gwraidd"
+msgid "Username"
+msgstr "Enw defnyddiwr"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Read-write"
-msgstr "Darllen-ysgrifennu"
+msgid "Left \"Windows\" key"
+msgstr "Bysell \"Windows\" chwith"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid "dhcpd Server Configuration"
+msgstr "Ffurfweddiad Gwasanaethwr dhcpd"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Video mode"
-msgstr "Modd fideo"
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
+msgstr ""
+"Defnydd cyfeiriadur:\n"
+" dim ond perchennog y cyfeiriadur neu ffeil yn y cyfeiriadur hwn fydd yn "
+"cael ei ddileu."
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Image"
-msgstr "Delwedd"
+msgid "Guyana"
+msgstr "Guyana"
-#: ../../any.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Default OS?"
-msgstr "System Weithredu Rhagosodedig?"
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr "ar wasanaethwr Novell \"%s\", argraffydd \"%s\""
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Enable OF Boot?"
-msgstr "Galluogi Cychwyn OF?"
+msgid "Remove a module"
+msgstr "Tynnu modiwl"
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Enable CD Boot?"
-msgstr "Galluogi cychwyn o CD?"
+msgid "Password"
+msgstr "Cyfrinair"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Goramser cychwyn y cnewyllyn"
+msgid ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
+msgstr ""
+"Ymresymiadau: (max, inactive=-1)\n"
+"\n"
+"Gosod cyfrinair yn erbyn \\fImax\\fP dyddiau ac oedi i newid i \\fIinactive"
+"\\fP."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Open Firmware Delay"
-msgstr "Agor Oedi Cadarnwedd"
+msgid "Advanced Configuration"
+msgstr "Ffurfweddiad Uwch"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Boot device"
-msgstr "Dyfais cychwyn"
+msgid "Scanning on your HP multi-function device"
+msgstr "Sganio eich dyfais amlbwrpas HP"
#: ../../any.pm:1
#, c-format
-msgid "Init Message"
-msgstr "Neges Init"
+msgid "Root"
+msgstr "Gwraidd"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Bootloader to use"
-msgstr "Bootloader ar waith"
+msgid "Choose an existing RAID to add to"
+msgstr "Dewis RAID presennol i ychwanegu ato"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Bootloader main options"
-msgstr "Prif ddewisiadau Bootloader"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "Twrcaidd (model modern \"Q\")"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Lilo message not found"
+msgstr "Heb ganfod neges lilo"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
msgstr ""
-"Dewis Nid yw 'cyfyngu dewisiadau llinell orchymyn' o werth heb gyfrinair"
+"Ailgreu awtomatic pennawd y cnewyllyn yn /boot ar\n"
+"gyfer /usr/include/linux{autoconf,version}.h"
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Give the ram size in MB"
-msgstr "Rhowch maint RAM mewn MB"
+msgid "if needed"
+msgstr "os oes angen"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Enable multiple profiles"
-msgstr "Galluogi aml-broffil"
+msgid "Restore Failed..."
+msgstr "Methodd Adfer..."
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Union faint o RAM os oes angen (canfod %dMB)"
+msgid "/Autodetect _jazz drives"
+msgstr "/Awtoganfod_gyrrwr jazz"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Glanhau /tmp bob tro fyddwch yn cychwyn"
+msgid ""
+"Description:\n"
+"\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
+"\n"
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
+"\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
+"\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
+"\n"
+"\n"
+msgstr ""
+"Disgrifiad:\n"
+"\n"
+" Mae Drakbackup yn cael ei ddefnyddio i cadw\n"
+" eich ffeiliau system wrth gefn.\n"
+" Yn ystod y ffurfweddiad medrwch ddewis:\n"
+"\t- Ffeiliau system,\n"
+"\t-Ffeiliau defnyddwyr,\n"
+"\t-Ffeiliau eraill.\n"
+"\tneu Eich holl system...ac Arall (megis Rhaniadau Windows)\n"
+"\n"
+" Mae Drackbackup yn caniatĂĄu i chi ddefnyddio:\n"
+"\t- Disg Caled.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (gyda awto gychwyn, achub ac awto osod.).\n"
+"\t- FTP.\n"
+"\t-Rsync.\n"
+"\t- Webdav.\n"
+"\t- TĂąp.\n"
+"\n"
+" Mae Drakbackup yn caniatĂĄu i chi adfer eich system i\n"
+" gyfeiriadur o ddewis y defnyddiwr.\n"
+"\n"
+" Yn rhagosodedig bydd ffeiliau wrth gefn yn cael eu cadw yn eich\n"
+" /var/lib/drakbackup directory\n"
+"\n"
+" Ffeil ffurfweddiad:\n"
+"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
+"\n"
+"\n"
+"Camau wrth adfer:\n"
+" \n"
+" Yn ystod yr adfer bydd Drakbackup yn tynnu\n"
+" eich cyfeiriadur gwreiddiol a gwirio nad yw'r holl \n"
+" ffeiliau wrth gefn wedi eu llygru. Argymhellir i chi \n"
+" gadw wrth gefn cyn adfer.\n"
+"\n"
+"\n"
-#: ../../any.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "Create a bootdisk"
-msgstr "Creu disg cychwyn"
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
+msgstr ""
+"Cyflwyniad\n"
+"\n"
+"Bydd y system weithredu a'r cydrannau gwahanol sydd o fewn dosbarthiad "
+"Mandrake Linux yn\n"
+"cael eu galw yn \"Gynnyrch Meddalwedd\" o hyn ymlaen. Mae'r Cynnyrch "
+"Meddalwedd yn\n"
+"cynnwys, ond heb eu cyfyngu, i'r casgliad o raglenni , dulliau, rheolau a "
+"dogfennau mewn\n"
+"perthynas Ăą'r system weithredu a chydrannau gwahanol dosbarthiad Mandrake "
+"Linux.\n"
+"\n"
+"\n"
+"1. Cytundeb Trwyddedu\n"
+"\n"
+"Darllenwch y ddogfen hon yn ofalus. Mae'r ddogfen hon yn gytundeb trwyddedu "
+"rhyngoch\n"
+"chi Ăą MandrakeSoft S.A,. sy'n berthnasol i'r Cynnyrch Meddalwedd.\n"
+"\n"
+"Wrth osod, dyblygu neu ddefnyddio'r Cynnyrch Meddalwedd mewn unrhyw fodd, "
+"rydych yn\n"
+"amlwg yn derbyn ac yn llawn cytuno i gadw at delerau ac amodau'r Drwydded "
+"hon.\n"
+"Os ydych yn anghytuno ag unrhyw rhan o'r cytundeb, ni chewch ganiatĂąd i "
+"osod, dyblygu\n"
+"neu ddefnyddio'r Cynnyrch Meddalwedd.\n"
+"Bydd unrhyw ymgais i osod, dyblygu neu ddefnyddio'r Cynnyrch Meddalwedd mewn "
+"modd\n"
+"nad yw'n cyd-fynd Ăą thelerau ac amodau'r Drwydded yn ddi-rym a bydd yn "
+"terfynu eich\n"
+"hawliau o dan y Drwydded hon. Ar ddiwedd y Drwydded, rhaid i chi "
+"ddinistrio'n syth pob\n"
+"copi o'r Cynnyrch Meddalwedd.\n"
+"\n"
+"\n"
+"2. Gwarant Gyfyngedig\n"
+"\n"
+"Mae'r Cynnyrch Meddalwedd a'r ddogfennaeth gysylltiedig yn cael eu darparu "
+"\"fel ag y maent\",\n"
+"heb ddim gwarant, hyd y mae'r gyfraith yn caniatĂĄu.\n"
+"Ni fydd MandrakeSoft S.A. yn gyfrifol, o dan unrhyw amgylchiad, a chyhyd ag "
+"y bydd y gyfraith yn\n"
+"caniatĂĄu, am unrhyw iawn o gwbl, arbennig, damweiniol, uniongyrchol neu "
+"anuniongyrchol (gan\n"
+"gynnwys heb gyfyngu ar iawndal am golli busnes, tarfu ar fusnes, colled "
+"ariannol, costau cyfreithiol,\n"
+"a chosb o ganlyniad i achos llys, neu unrhyw golled o ganlyniad) yn codi o'r "
+"defnydd neu'r anallu i\n"
+"ddefnyddio'r Cynnyrch Meddalwedd, hyd yn oed os yw MandrakeSoft wedi eu "
+"cynghori o'r posibilrwydd\n"
+"o'r fath iawn.\n"
+"\n"
+"CYFRIFOLDEB CYFYNGEDIG YN GYSYLLTIEDIG GYDA'R MEDDIANT NEU'R DEFNYDD O "
+"FEDDALWEDD\n"
+" GWAHARDDEDIG MEWN RHAI GWLEDYDD\n"
+"\n"
+"Ni fydd MandrakeSoft S.A. yn gyfrifol, o dan unrhyw amgylchiad, a chyhyd y "
+"bydd y gyfraith yn caniatĂĄu,\n"
+"i fod yn atebol am unrhyw iawn o gwbl, arbennig, damweiniol, uniongyrchol "
+"neu anuniongyrchol (gan gynnwys\n"
+"heb gyfyngu ar iawndal am golli busnes, tarfu ar fusnes, colled ariannol, "
+"costau cyfreithiol, a chosb o ganlyniad\n"
+"i achos llys, neu unrhyw golled o ganlyniad) yn codi o lwytho i lawr "
+"cydrannau meddalwedd o un o safleoedd\n"
+" Mandrake Linux, sydd wedi eu gwahardd neu eu hatal mewn rhai gwledydd gan "
+"gyfreithiau lleol. Mae'r\n"
+"cyfrifoldeb cyfyngedig hwn yn perthyn i , ond heb ei gyfyngu i'r, cydrannau "
+"cryptograffiaeth cryf sy'n cael\n"
+"eu cynnwys o fewn y Cynnyrch Meddalwedd.\n"
+"3. Trwydded GPL a Thrwyddedau Cysylltiedig\n"
+"\n"
+"Mae'r Cynnyrch Meddalwedd yn cynnwys cydrannau sydd wedi eu creu gan "
+"bersonau a endidau gwahanol.\n"
+"Mae'r rhan fwyaf o'r cydrannau hyn yn cael eu llywodraethu gan dermau ac "
+"amodau Trwydded Gyhoeddus\n"
+"Cyffredinol (General Public Licence (GPL)), GNU, fydd yn cael ei gyfeirio "
+"ato o hyn ymlaen fel \"GPL\", neu\n"
+"drwyddedau cyffelyb.. Mae'r rhan fwyaf o'r trwyddedau'n caniatĂĄu i chi "
+"ddefnyddio, dyblygu, addasu neu\n"
+" ailddosbarthu'r cydrannau maent yn eu cynnwys. Darllenwch delerau ac amodau "
+"trwydded pob cydran cyn\n"
+"eu defnyddio. Dylai pob cwestiwn am drwydded cydran gael ei ofyn i awdur y "
+"gydran ac nid i MandrakeSoft.\n"
+"Mae'r rhaglenni ddatblygwyd gan MandrakeSoft yn cael eu llywodraethu o dan "
+"Drwydded GLP. Mae'r dogfennau\n"
+" ysgrifennwyd gan MandrakeSoft S.A. yn cael eu llywodraethu gan drwydded "
+"benodol. Darllenwch y dogfennau\n"
+"am fwy o fanylion.\n"
+"\n"
+"4. Hawliau Eiddo Deallusol\n"
+"\n"
+"Mae pob hawl cydrannau'r Cynnyrch Meddalwedd yn perthyn i'w hawduron "
+"perthnasol ac wedi eu hamddiffyn\n"
+"gan gyfreithiau eiddo deallusol a hawlfraint sy'n berthnasol i raglenni "
+"meddalwedd. Mae MandrakeSoft yn cadw\n"
+"ei hawl i newid neu addasu ei Gynnyrch Meddalwedd, yn rhannol neu yn gyfan, "
+"drwy unrhyw ddull ac ar gyfer\n"
+"unrhyw bwrpas. Mae \"Mandrake\", \"Mandrake Linux\" a'r logos cysylltiedig "
+"yn nodau masnachol sy'n\n"
+"perthyn i MandrakeSoft S.A.\n"
+"\n"
+"5. Cyfreithiau Llywodraethol\n"
+"Os bydd unrhyw rhan o'r cytundeb hwn yn cael ei ddal yn ddi-rym, "
+"anghyfreithlon neu amherthnasol gan\n"
+"benderfyniad llys, bydd y rhan yma'n cael ei dynnu o'r cytundeb hwn. Byddwch "
+"yn parhau i fod yn rhwymedig\n"
+"i adrannau cymwys o'r cytundeb.\n"
+"Mae telerau ac amodau'r Drwydded hon yn cael eu llywodraethu gan Cyfreithiau "
+"Ffrainc. Mae'n ddymunol y\n"
+"bydd pob anghytundeb ar amodau'r drwydded yn cael eu datrys y tu allan i'r "
+"llys. Fel cam olaf, bydd yranghytundeb yn cael ei drosglwyddo i'r Llysoedd "
+"Barn, Paris - Ffrainc. Am unrhyw gwestiwn ynghylch yddogfen hon cysylltwch Ăą "
+"MandrakeSoft S.A. \n"
-#: ../../any.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "restrict"
-msgstr "cyfyngu"
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
+msgstr ""
+"bar cynnydd cydfesuryn x\n"
+"yn ei gornel uchaf chwith"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Restrict command line options"
-msgstr "Cyfyngu dewisiadau llinell orchymyn"
+msgid "Current interface configuration"
+msgstr "Ffurfweddiad rhyngwyneb cyfredol"
+
+#: ../../printer/data.pm:1
+#, c-format
+msgid "LPD - Line Printer Daemon"
+msgstr "LPD - Line Printer Daemon"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
+msgstr ""
+"\n"
+"Os oes gennych gerdyn, dylai'r gwerthoedd ar y sgrĂźn nesaf fod yn gywir.\n"
+"\n"
+"Os oes gennych gerdyn PCMCIA, rhaid i chi wybod irq ac io eich cerdyn.\n"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Do not print any test page"
+msgstr "Peidiwch argraffu tudalennau prawf"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Gurmukhi"
+msgstr "Gurmukhi"
#: ../../any.pm:1
#, c-format
msgid "Force No APIC"
msgstr "Peidio Gorfodi APIC"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Enable ACPI"
-msgstr "Galluogi ACPI"
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr "Mae'r cyfrinair yn rhy syml ( rhaid iddo fod o leiaf %d nod o hyd)"
-#: ../../any.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Delay before booting default image"
-msgstr "Oedi cyn cychwyn y ddelwedd rhagosodedig"
+msgid "[keyboard]"
+msgstr "[bysellfwrdd]"
-#: ../../any.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "compact"
-msgstr "cryno"
+msgid "FTP proxy"
+msgstr "Dirprwy FTP"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Compact"
-msgstr "Cryno"
+msgid "Install List"
+msgstr "Gosod Rhestr"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bootloader installation"
-msgstr "Gosodiad Bootloader"
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr ""
+"Newid\n"
+"Llwybr Adfer"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "First sector of boot partition"
-msgstr "Adran gyntaf o'r rhaniad cychwyn"
+msgid "Show only for the selected day"
+msgstr "Dangos ar y diwrnod penodol yn unig"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Adran gyntaf o'r gyrrwr (MBR)"
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
+"\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
+"\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
+"Trosolwg drakTermServ\n"
+"\t\t\t \n"
+" - Crea Delwedd Cychwynydd Galluogi Etherboot:\n"
+" \t\tI gychwyn y cnewyllyn drwy etherboot, rhaid creu delwedd "
+"cnewyllyn/initrd arbennig.\n"
+" \t\tmae tmkinitrd-net yn gwneud llawer o'r gwaith ac mae drak "
+"termServ yn rhyngwyneb graffigol iddo\n"
+" \t\ti gynorthwyo rheoli/addasuto help manage/customize these "
+"images.\n"
+"\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
+"\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Lle rydych chi eisiau gosod y cychwynnydd?"
+msgid "512 kB"
+msgstr "512 kB"
-#: ../../any.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "LILO/grub Installation"
-msgstr "Gosodiad LILO/grub"
+msgid "Logs"
+msgstr "Cofnodion"
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "SILO Installation"
-msgstr "Gosodiad SILO"
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr "(Sylwer: Nid oes modd awtoganfod pyrth paralel)"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Skip"
-msgstr "Hepgor"
+msgid "<control>N"
+msgstr "<control>N"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "On Floppy"
-msgstr "Ar Ddisg Meddal"
+msgid "What kind of card do you have?"
+msgstr "Pa fath o gerdyn sydd gennych?"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "First sector of the root partition"
-msgstr "Adran gyntaf o'r rhaniad gwraidd"
+msgid "<control>O"
+msgstr "<control>O"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Security"
+msgstr "Diogelwch"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
msgstr ""
-"Rydych wedi penderfynu gosod y cychwynnydd ar raniad.\n"
-"Mae hyn yn awgrymu bod gennych gychwynnydd ar ddisg caled eisoes: (ee System "
-"Commander).\n"
+"Mae modd hefyd i ddefnyddio rhag wyneb graffigol \"xpdq\" i osod dewisiadau "
+"a thrin gwaith argraffu.\n"
"\n"
-"Gyda pha ddisg ydych chi'n cychwyn?"
+"Os ydych yn defnyddio KDE fel amgylchedd pen bwrdd mae gennych \"botwm "
+"argyfwng\", eicon ar y bwrdd gwaith, wedi ei labelu \"Atal yr Argraffydd!\", "
+"fydd yn stopio 'r holl waith argraffu'n syth pan fyddwch yn ei glicio. Mae "
+"hyn yn ddefnyddiol pan fydd y papur wedi mynd yn sownd, ag ati.\n"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Creating bootdisk..."
-msgstr "Creu disg cychwyn"
+msgid "<control>Q"
+msgstr "<control>Q"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Rhowch ddisg meddal yn %s"
+msgid "Unknown"
+msgstr "Anhysbys"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Dewiswch y gyrrwr disg meddal i'w ddefnyddio i greu disg cychwyn"
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr ""
+"Mae'r gwesteiwr ar y rhestr yn barod, does dim modd ei ychwanegu eto.\n"
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Second floppy drive"
-msgstr "Ail ddisg meddal"
+msgid "Network Configuration"
+msgstr "Ffurfweddiad y Rhwydwaith"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "First floppy drive"
-msgstr "Gyrrwr disg meddal cyntaf"
+msgid "<control>S"
+msgstr "<control>S"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "Nid oes gyrrwr disg meddal ar gael"
+msgid ""
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
+msgstr ""
+"Protocol ar gyfer gweddill y byd\n"
+" dim D-Channel (llinell les)"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s must be a number!"
+msgstr "Rhaid i ddewis %s fod yn rhif!"
+
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#, c-format
+msgid "Notice"
+msgstr "Nodyn"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
msgstr ""
-"Mae'r disg cychwyn addasu yn cynnig ffordd i gychwyn eich system Linux heb\n"
-"ddibynnu ar eich cychwynnwr arferol. Mae hyn yn ddefnyddiol os nad ydych am\n"
-"osod LILO (neu grub) ar eich system, neu bod system weithredu arall yn "
-"dileu\n"
-"LILO, neu nad yw LILO'n gweithio gyda'ch ffurfweddiad caledwedd.\n"
-"Mae modd defnyddio disg cychwyn addasu hefyd gyda delwedd achub Mandrake,\n"
-"gan ei gwneud yn lawer haws adfer methiannau system sylweddol. Hoffech chi\n"
-"greu disg cychwyn ar gyfer eich system?\n"
-"%s"
+"Ymresymiadau: (arg)\n"
+"\n"
+"Galluogi/Analluogi gwiriad diogelwch dyddiol."
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
+"Ymresymiadau: (arg)\n"
"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
+"Galluogi/Analluogi crontab ac at ar gyfer defnyddwyr. Rhoi defnyddwyr Ăą "
+"chniatĂąd yn\n"
+"/etc/cron.allow a /etc/at.allow\n"
+" (gw. man yn(1) a crontab(1))."
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr "Nid ydych wedi ffurfweddu X. Ydych chi'n siwr eich bod am wneud hyn?"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
+"Bydd ffurfweddi'r argraffydd yn digwydd yn awtomatig. Os na chafodd eich "
+"argraffydd ei ganfod yn gywir neu byddai'n well gennych ffurfweddiad unigryw "
+"i'ch argraffydd, cychwynnwch \"Ffurfweddiad gyda Llaw\"."
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "What type of partitioning?"
+msgstr "Pa fath o raniad ?"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"file list sent by FTP: %s\n"
+" "
msgstr ""
+"rhestr ffeil yrrwyd gan FTP: %s\n"
+" "
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Interface"
+msgstr "Rhyngwyneb"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Options Description:\n"
+"\n"
+" - Backup System Files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Backup User Files: \n"
+"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
+"\n"
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane. To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
+"\n"
+msgstr ""
+"disgrifiad o'r dewisiadau:\n"
+"\n"
+"- Ffeiliau system Cadw wrth Gefn\n"
+" \n"
+"\tMae'r dewis hwn yn caniatĂĄu i chi gadw wrth gefn eich\n"
+"\tcyfeiriadur /etc, sy'n cynnwys eich ffeiliau ffurfweddiad.\n"
+"\tByddwch ofalus wrth ei adfer i beidio trosysgrifo:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+"- Ffeiliau Defnyddiwr Cadw wrth Gefn\n"
+"\n"
+"\tMae'r dewis hwn yn caniatĂĄu i chi ddewis pob defnyddiwr\n"
+"\trydych am gadw wrth gefn ar eu cyfer.\n"
+"\tI ddiogelu lle ar ddisg, argymhellir nad ydych yn cadw storfa'r\n"
+"\t porwr.\n"
+" \n"
+"- Cadw Ffeiliau Eraill wrth Gefn\n"
+"\n"
+"\tMae'r dewis hwn yn caniatĂĄu i chi ychwanegu mwy\n"
+"\to ddata i'w gadw. Gyda'r cadw arall wrth gefn nid\n"
+"\tyw'n bosibl ar hyn o bryd i ddewis cadw wrth gefn\n"
+"\tcynyddol.\t\t\n"
+"\n"
+"Cadw wrth Gefn Cynyddol:\n"
+"\n"
+"\tCadw wrth Gefn Cynyddol yw'r dewis mwyaf pwerus.\n"
+"\tMae'r dewis hwn yn caniatĂĄu i chi gadw eich data wrth\n"
+"\tgefn y tro cyntaf ac yna dim ond yr hyn sydd wedi newid.\n"
+"\tYna bydd modd i chi, yn ystod y cam o adfer, adfer eich\n"
+"\tdata o ddyddiad penodol.\n"
+"\tOs nad ydych wedi dewis hwn, bydd yr holl hen ffeiliau\n"
+"\twrth gefn yn cael eu dileu cyn pob cadw wrth gefn. \n"
"\n"
"\n"
-"(RHYBUDD! Rydych yn defnyddio XFS ar gyfer eich rhaniad gwraidd,\n"
-"bydd creu disg cychwyn ar ddisg meddal 1.44Mb'n debygol o fethu,\n"
-"oherwydd mae XFS yn gofyn am yrrwr mawr iawn)."
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
msgstr ""
-"Mae disg cychwyn yn darparu ffordd o gychwyn eich system Linux heb ddibynnu\n"
-"ar lwythwr cychwyn arferol. Mae hyn yn ddefnyddiol os ydych am osod SILO ar\n"
-"eich system, neu mae system weithredu arall wedi tynny SILO, neu nad yw "
-"SILO'n\n"
-"gweithio gyda eich ffurfweddiad caledwedd chi. Mae modd defnyddio disg "
-"cychwyn\n"
-" unigol hefyd gyda delwedd achub Mandrake, gan ei gwneud yn llawer haws "
-"adfer o\n"
-" fethiannau systemig sylweddol\n"
+"Ymresymiadau: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"Os hoffech greu disg cychwyn ar gyfer eich system, rhowch ddisg meddal yn y "
-"gyrrwr\n"
-" cyntaf a chliciwch \"Iawn\"."
+"Galluogi/Analluogi adroddiadau syslog i consol 12. \\fIexpr\\fP yw'r \n"
+"disgrifiad o beth iw' gofnodi (gw. syslog conf(5) am wyboodaeth) a\n"
+"dev y ddyfais i greu cofnod."
-#: ../../bootloader.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Nid oes modd gosod y cychwynnydd ar raniad %s\n"
+msgid "comma separated strings"
+msgstr "llinellau collnod ranedig"
-#: ../../bootloader.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "not enough room in /boot"
-msgstr "dim digon o le yn /boot"
+msgid "These are the machines from which the scanners should be used:"
+msgstr "Dyma'r cyfrifiaduron ddylai'r sganwyr fod ar gael:"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Bydd y cofnod wedi ei amlygu'n cychwyn yn awtomatig ymhen %d eiliad."
+msgid "Messages"
+msgstr "Negeseuon"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "gorchmynion cyn cychwyn, neu 'c' am y llinell orchymyn."
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr "Anhysbys|CPH06X (bt878) [nifer o werthwyr]"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Gwasgwch Enter i gychwyn y system weithredu, 'g' i olygu'r"
+msgid "POP and IMAP Server"
+msgstr "Gwasanaethwr POP ac IMAP"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Defnyddiwch allweddi %c a %c i ddewis pa gofnod i'w amlygu."
+msgid "Mexico"
+msgstr "Mecsico"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Croeso i GRUB, y dewiswr systemau gweithredu!"
+msgid "Model stepping"
+msgstr "Stepio model"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Rwanda"
+msgstr "Rwanda"
-#: ../../bootloader.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Grub"
-msgstr "Grub"
+msgid "Do you have any %s interfaces?"
+msgstr "Oes gennych unrhyw rhyngwyneb %s?"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with text menu"
-msgstr "LILO gyda dewislen testun"
+msgid "Switzerland"
+msgstr "Y Swisdir"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with graphical menu"
-msgstr "Lilo gyda dewislen graffigol"
+msgid "Brunei Darussalam"
+msgstr "Brunei Darussalam"
-#: ../../bootloader.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Remote lpd Printer Options"
+msgstr "Dewisiadau Argraffydd lpd Pell"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
"\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
msgstr ""
-"Croeso i %s y dewiswr systemau gweithredu! \n"
+"Mae GNU/Linux yn system aml-ddefnyddiwr, ac mae hyn yn golygu bod pob\n"
+"defyddiwr yn medru cael ei ddewisiadau ei hun, ei ffeiliau ei hun ac yn y "
+"blaen.\n"
+"Gallwch ddarllen yr \"Starter Guide\" i ddysgu mwy. Ond yn anhebyg i "
+"\"gwraidd\",\n"
+"sef y gweinyddwr, ni fydd modd i'r defnyddiwr fyddwch yn eu creu yma'n "
+"medru\n"
+"newid dim ond eu ffeiliau a'u ffurfweddiad ei hun. Bydd rhaid i chi greu un\n"
+"defnyddiwr cyffredin ar gyfer chi eich hun. Dyma'r cyfrif ddylech "
+"mewngofnodi\n"
+"iddo ar gyfer defnydd bob dydd. Er ei fod yn ymarferol iawn i fewngofnodi "
+"fel\n"
+"\"root\" gall fod yn beryglus iawn!. Gall y camgymeriad lleiaf olygu nad yw "
+"eic\n"
+"system yn gweithio ragor. Os wnewch chi gamgymeriad mawr fel defnyddiwr\n"
+"cyffredin, byddwch ond yn colli rhywfaint o wybodaeth, ac nid y system "
+"gyfan.\n"
"\n"
-"Dewiswch system weithredu o'r rhestr uchod neu\n"
-"arhoswch %d eiliad am gychwyn rhagosodedig\n"
+"Yn gyntaf rhowch eich enw go iawn. Dose dim rhaid, wrth gwrs - mae modd\n"
+"i chi rhoi beth bynnag hoffech chi. Bydd DraX yn cymryd yr enw cyntafa'i roi "
+"yn\n"
+"yr \"Enw defnyddiwr\" Dyma'r enw bydd y defnyddwr hwn yn ei ddefnyddio i\n"
+"fewngofnodi i'r system. Mae modd ei newid. Yna rhowch gyfrinair. Nid yw\n"
+"cyfrianair defnyddiwr cyffredin mor bwysig ag un \"gwraidd\" o safbwynt "
+"diogelwch\n"
+"ond nid yw hynny'n rheswm i'w esgeuluso - wedi'r cyfan mae eich ffeiliau "
+"mewn\n"
+"perygl\n"
+"\n"
+"Os wnewch chi glicio \"Derbyn defnyddiwr\", bydd modd ychwanegu fanint\n"
+"fynnoch. Ychwanegwch ddefnyddiwr ar gyfer pob un o'ch ffrindiau: eich tad\n"
+"neu eich chwaer, e.e. Ar ĂŽl ychwanegu'r holl ddefnyddwyr, cliciwch \"Nesaf ->"
+"\".\n"
"\n"
+"Bydd clicio'r botwm \"Uwch\" yn caniatĂĄu i chi newid y \"cragen\" "
+"rhagosodedig\n"
+"ar gyfer y defnyddiwr hwnnw (bash yw'r rhagosodedig)."
-#: ../../common.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "consolehelper missing"
-msgstr "consolehelper ar goll"
+msgid "Configure Internet Access..."
+msgstr "Ffurfweddu Mynediad i'r We..."
-#: ../../common.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "kdesu missing"
-msgstr "kdesu ar goll"
+msgid "Norway"
+msgstr "Norwy"
-#: ../../common.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Bydd lluniau o'r sgrĂźn ar gael ar ĂŽl gosod yn %s"
+msgid "Danish"
+msgstr "Danaidd"
-#: ../../common.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "Meth creu lluniau o'r sgrĂźn cyn rhannu"
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
+msgstr ""
+"Cychwyn clo allweddell numlock yn awtomatig yn consol \n"
+"ac XFree wrth gychwyn y peiriant."
-#: ../../common.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "%d seconds"
-msgstr "%d eiliad"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+"Rhowch ffurfweddiad IP ar gyfer y peiriant hwn\n"
+"Dylai pob eitem ei roi fel cyfeiriad IP nodiant collnod degymol\n"
+"(e.e.1.2.3.4)."
-#: ../../common.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "1 minute"
-msgstr "1 munud"
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
+msgstr ""
+"Mae gosodiad Mandrake Linux yn cynnwys nifer o CD-ROMau. Mae DrakX\n"
+"yn gwybod os yw pecyn penodol wedi ei leoli ar CD-ROM arall a bydd yn bwrw\n"
+"allan y CD cyfredol a gofyn am y llall."
-#: ../../common.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "%d minutes"
-msgstr "%d munud"
+msgid "Processors"
+msgstr "Prosesyddion"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "TB"
-msgstr "TB"
+msgid "Bulgaria"
+msgstr "Bwlgaria"
-#: ../../common.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "GB"
-msgstr "GB"
+msgid "No NIC selected!"
+msgstr "Heb ddewis NIC!"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "MB"
-msgstr "MB"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr "Svalbard and Jan Mayen Islands"
-#: ../../common.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "KB"
-msgstr "KB"
+msgid ""
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
+msgstr ""
+"Digwyddod anhawsterau yn ystod y ffurfweddiad.\n"
+"Profwch eich cysylltiad drwy net_monitor neu mcc. Os nad yw eich cysylltiad "
+"yn gweithio, efallai y byddwch eisiau ailgychwyn y ffurfweddiad"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "United States"
-msgstr "Yr Unol Daleithiau"
+msgid "partition %s is now known as %s"
+msgstr "Mae rhaniad %s yn cael ei alw'n %s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Austria"
-msgstr "Awstria"
+msgid "Backup Other files..."
+msgstr "Cadw wrth gefn ffeiliau eraill..."
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Italy"
-msgstr "Yr Eidal"
+msgid "SMB server IP"
+msgstr "IP Gwasanaethwr SMB"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Netherlands"
-msgstr "Yr Iseldiroedd"
+msgid "Congo (Kinshasa)"
+msgstr "Congo (Kinshasa)"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sweden"
-msgstr "Sweden"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "Mae tabl rhaniad gyrrwr %s yn mynd i gael ei ysgrifennu i'r ddisg!"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Norway"
-msgstr "Norwy"
+msgid "Installing HPOJ package..."
+msgstr "Gosod pecyn HPOJ..."
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Greece"
-msgstr "Groeg"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr ""
+"Mae'r disg cychwyn addasu yn cynnig ffordd i gychwyn eich system Linux heb\n"
+"ddibynnu ar eich cychwynnwr arferol. Mae hyn yn ddefnyddiol os nad ydych am\n"
+"osod LILO (neu grub) ar eich system, neu bod system weithredu arall yn "
+"dileu\n"
+"LILO, neu nad yw LILO'n gweithio gyda'ch ffurfweddiad caledwedd.\n"
+"Mae modd defnyddio disg cychwyn addasu hefyd gyda delwedd achub Mandrake,\n"
+"gan ei gwneud yn lawer haws adfer methiannau system sylweddol. Hoffech chi\n"
+"greu disg cychwyn ar gyfer eich system?\n"
+"%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Germany"
-msgstr "Yr Almaen"
+msgid ", USB printer \\#%s"
+msgstr ", argraffydd USB \\#\"%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Czech Republic"
-msgstr "Gweriniaeth Tsiec"
+msgid "Latvian"
+msgstr "Latfiaidd"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belgium"
-msgstr "Gwlad Belg"
+msgid "monthly"
+msgstr "bob mis"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "France"
-msgstr "Ffrainc"
+msgid "Module name"
+msgstr "Enw'r modiwl"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Costa Rica"
-msgstr "Costa Rica"
+msgid "Start at boot"
+msgstr "Cychwyn y peiriant"
-#: ../../fsedit.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental Backups"
+msgstr "Defnyddio Cadw wrth Gefn Cynyddol (peidio disodli hen gadw wrth gefn)"
+
+#: ../../any.pm:1
#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Gwall wrth agos %s ar gyfer ysgrifennu %s"
+msgid "First sector of drive (MBR)"
+msgstr "Adran gyntaf o'r gyrrwr (MBR)"
-#: ../../fsedit.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Nothing to do"
-msgstr "Dim i'w wneud"
+msgid "Joystick"
+msgstr "Ffon hud"
-#: ../../fsedit.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Nid oes digon o le ar gyfer awtoddynodi"
+msgid "El Salvador"
+msgstr "El Salvador"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Nid oes modd defnyddio Cyfrol Resymegol LVM ar gyfer pwynt gosod %s"
+msgid "Use Unicode by default"
+msgstr "Defnyddio Unicode drwy rhagosodiad"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-"Mae angen gwir system ffeilio (ext2, reiserfs, xfs, neu jfs)) ar gyfer y "
-"pwynt gosod\n"
+msgid "the module of the GNU/Linux kernel that handles the device"
+msgstr "y modiwl o'r cnewyllyn GNU/Linux sy'n trin y ddyfais honno"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Dylai'r cyfeiriadur aros o fewn y system ffeilio gwraidd"
+msgid "Trying to rescue partition table"
+msgstr "Yn ceisiio achub y tabl rhaniadau"
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Does dim modd defnyddio Cyfrol Resymegol LVM ar gyfer pwynt gosod %s"
+msgid "Option %s must be an integer number!"
+msgstr "Rhaid i ddewis %s fod yn gyfanrif"
-#: ../../fsedit.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
+"Entries you'll have to fill:\n"
+"%s"
msgstr ""
-"Rydych wedi dewis meddalwedd rhannu RAID fel gwraidd (/)\n"
-"Nid oes cychwynnydd yn medru trin hwn heb rhaniad /boot\n"
-"Cofiwch ychwanegu rhaniad /boot"
+"Gwybodaeth i'w gyflawyno:\n"
+"%s"
-#: ../../fsedit.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Mae yna eisoes raniad gyda phwynt gosod %s\n"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "Methu cychwyn diweddariad byw!!! \n"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "Dylai enw'r pwyntiau gosod gynnwys llythrennau a rhifau'n unig"
+msgid "Name: "
+msgstr "Enw :"
-#: ../../fsedit.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Rhaid i bwyntiau gosod gynnwys / arweiniol"
+msgid "16 million colors (24 bits)"
+msgstr "16 miliwn o liwiau (24 did)"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Does dim modd defnyddio ReiserFS ar gyfer rhaniadau llai na 32MB"
+msgid "Allow all users"
+msgstr "CaniatĂĄu pob defnyddiwr"
-#: ../../fsedit.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Does dim modd defnyddio JFS ar raniadau llai na 16MB"
+msgid "The official MandrakeSoft Store"
+msgstr "Y siop MandrakeSoft swyddogol"
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Resizing"
+msgstr "Newid maint"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Cable connection"
+msgstr "Cysylltiad cebl"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "User"
+msgstr "Defnyddiwr"
#: ../../fsedit.pm:1
#, c-format
@@ -985,1330 +1940,259 @@ msgstr ""
"\n"
"Ydych chi'n cytuno i golli'r holl raniadau?\n"
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Error"
-msgstr "Gwall"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr ""
+"Gwnewch cadw wrth gefn newydd cyn adfer ( ar gyfer cadw wrth gefn cynyddol "
+"yn unig )"
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "server"
-msgstr "Gwasanaethwr"
+msgid "Printer on parallel port \\#%s"
+msgstr "Argraffydd ar borth paralel \\#\"%s"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "with /usr"
-msgstr "gyda /usr"
+msgid "Name"
+msgstr "Enw"
-#: ../../fsedit.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "simple"
-msgstr "syml"
+msgid "mkraid failed"
+msgstr "methodd mkraid"
-#: ../../fs.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Enabling swap partition %s"
-msgstr "Galluogi rhaniad cyfnewid %s"
+msgid "Button 3 Emulation"
+msgstr "Efelychiad Botwm 3"
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "error unmounting %s: %s"
-msgstr "gwall dadosod %s: %s"
+msgid "Sending files..."
+msgstr "Anfon ffeiliau..."
-#: ../../fs.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "methodd gosod rhaniad %s yng nghyfeiriadur %s"
+msgid "Israeli (Phonetic)"
+msgstr "Israelaidd (Ffonetig)"
-#: ../../fs.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mounting partition %s"
-msgstr "Yn fformatio rhaniad %s"
+msgid "access to rpm tools"
+msgstr "mynediad i offer rpm"
-#: ../../fs.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Checking %s"
-msgstr "Gwirio %s"
+msgid "edit"
+msgstr "golygu"
-#: ../../fs.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Formatting partition %s"
-msgstr "Yn fformatio rhaniad %s"
+msgid "You must choose/enter a printer/device!"
+msgstr "Rhaid dewis/rhoi argraffydd/dyfais!"
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Creu a fformatio ffeil %s"
+msgid "Permission problem accessing CD."
+msgstr "Anhawsterau caniatĂąd wrth gael mynediad i'r CD."
-#: ../../fs.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Nid wyf yn gwybod sut i fformatio %s ym math %s"
+msgid "Phone number"
+msgstr "Rhif ffĂŽn"
-#: ../../fs.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "%s formatting of %s failed"
-msgstr "methodd fformatio %s o %s"
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr "Gwall. Nid yw gyrrwr \"%s\" wedi ei restru"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Cliciwch \"Iawn\" os ydych am ddileu'r holl ddata a rhaniadau sy'n "
-"bresennol\n"
-"ar y disg. Byddwch ofalus, wedi i chi glicio \"Iawn ->\" ni fydd modd i chi\n"
-"adfer unrhyw ddata na rhaniadau presennol ar y disg caled, gan gynnwys\n"
-"data Windows.\n"
-"\n"
-"Cliciwch \" <- Blaenorol\" i atal y weithred hon heb golli unrhyw ddata\n"
-"a rhaniadau sy'n bresennol ar y ddisg galed."
+msgid "Printer name, description, location"
+msgstr "Enw'r argraffydd, disgrifiad, lleoliad"
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Dewiswch y ddisg galed rydych am ei ddileu er mwy n gosod eich rhaniad\n"
-"Mandrake Linux newydd. Byddwch ofalus, bydd yr holl ddata sydd arno'n\n"
-"cael ei ddileu ac ni fydd modd ei adfer!"
+msgid "USA (broadcast)"
+msgstr "UDA (darlledu)"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
+"Please choose the\n"
+"media for backup."
msgstr ""
-"I grynhoi, bydd DrakX yn cyflwyno crynodeb o'r wybodaeth amrywiol\n"
-"sydd ganddo am eich system. Yn ddibynnol ar eich caledwedd, mae'n bosib\n"
-"bod gennych rywfaint o'r nodweddion canlynol. Mae pob cofnod yn cynnwys\n"
-"eitem ffurfweddadwy, a chrynodeb o'r ffurfweddiad presennol. Cliciwch ar y\n"
-"botwm \"Ffurfweddu\" perthnasol i'w newid.\n"
-"\n"
-" *\"Bysellfwrdd\": gwirio ffurfweddiad map y bysellfwrdd a'i newid os oes "
-"angen.\n"
-"\n"
-" *\"Gwlad\": gwirio'r dewis iaith. Os nad ydych yn y wlad hon, cliciwch y "
-"botwm\n"
-"\"Ffurfweddu\" a dewis un arall. Os nad yw eich gwlad ar y rhestr gyntaf "
-"i'w\n"
-"dangos, cliciwch y botwm \"Rhagor\" am y rhestr gyflawn o wledydd.\n"
-"\n"
-" *\"Parth Amser\": Mae DrakX yn dyfalu eich parth amser yn ĂŽl y wlad rydych\n"
-"wedi ei dewis. Mae modd clicio ar y botwm\"Ffurfweddu\" i'w gywiro.\n"
-"\n"
-" *\"Llygoden\": gwirio ffurfweddiad y llygoden bresennol a chlicio ar y "
-"botwm\n"
-"i'w newid os oes angen.\n"
-"\n"
-" \"Argraffydd\": bydd clicio ar y botwm \"Ffurfweddu\" yn agor y dewin\n"
-"ffurfweddu argraffydd. Darllenwch y pennawd yn y \"Starter Guide\" ar\n"
-"sut i osod argraffydd newydd. Mae'r rhyngwyneb yn debyg i'r un ar gyfer\n"
-"ei osod yn y man cyntaf.\n"
-"\n"
-" *\"Cerdyn sain\": os oes cerdyn sain wedi ei ganfod ar eich system bydd\n"
-"yn cael ei ddangos yma. Os ydych yn sylwi nad y cerdyn sain sy'n cael ei\n"
-"ddangos yw'r un sydd ar eich system, yna cliciwch y botwm a dewis\n"
-"gyrrwr arall.\n"
-"\n"
-" *\"Rhyngwyneb Graffigol\": fel rheol bydd DrakX yn gosod eich rhyngwyneb\n"
-"i gydraniad \"800x600\" neu \"1024x768\". Os nad yw hyn yn addas ar\n"
-"eich cyfer cliciwch y botwm \"Ffurfweddu\" i'w newid.\n"
-"\n"
-" *\"Cerdyn Teledu\": os oes cerdyn teledu wedi ei ganfod ar eich system\n"
-"bydd yn cael ei ddangos yma. Os oes gennych gerdyn ac nid yw wedi cael\n"
-"ei ganfod, cliciwch \"Ffurfweddu\" i geisio ei ffurfweddu Ăą llaw.\n"
-"\n"
-" *\"Cerdyn ISDN\": os oes cerdyn ISDN wedi ei ganfod ar eich system bydd\n"
-"yn cael ei ddangos yma. Mae modd clicio ar \"Ffurfweddu\" i newid y\n"
-"paramedrau sy'n gysylltiedig Ăą'r cerdyn.\n"
-"\n"
-" *\"Rhwydwaith\": os ydych am ffurfweddu eich mynediad i'r Rhyngrwyd neu\n"
-"eich rhwydwaith lleol.\n"
-"\n"
-" *\"Lefel Diogelwch\": mae modd ail ddiffinio'r lefel diogelwch osodwyd yn\n"
-"flaenorol ().\n"
-"\n"
-" *\"Mur Cadarn\": mae'n syniad da gosod mur cadarn i'ch amddiffyn rhag\n"
-"ymyriadau os ydych yn bwriadu cysylltu eich cyfrifiadur Ăą'r Rhyngrwyd.\n"
-"Darllennwch y bennod perthnasol yn y \"Starter Guide\" am fanylion\n"
-"gosodiadau mur cadarn.\n"
-"\n"
-" *\"Cychwynnydd\": os hoffech newid ffurfweddiad eich cychwynnydd\n"
-"cliciwch y botwm honno. Ar gyfer defnyddwyr profiadol.\n"
-"\n"
-" *\"Gwasanaethau\": yma bydd modd i chi wneud man newidiadau i'r\n"
-"gwasanaethau sy'n cael eu rhedeg ar eich cyfrifiadur. Os ydych yn\n"
-" bwriadu defnyddio'r cyfrifiadur fel gwasanaethwr mae'n syniad da\n"
-"darllen y gosodiadau'n fanwl."
+"Dewiswch y cyfrwng ar\n"
+"gyfer cadw wrth gefn..."
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
-msgstr ""
-"\"Cerdyn sain\": os yw cerdyn sain yn cael ei ganfod ar eich cyfrifiadur, "
-"bydd \n"
-"yn cael ei ddangos yma. Os ydych yn sylwi nad y cerdyn sain sydd ar eich\n"
-"cyfrifiadur sy'n cael ei ddangos, yna cliciwch ar y botwm a dewis\n"
-" gyrrwr arall."
+msgid "Use Xinerama extension"
+msgstr "Defnyddiwch estyniad Xinerama"
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot yw'r cychwynnydd ar gyfer caledwedd NewWorld MacIntosh. Mae'n\n"
-"medru cychwyn GNU/Linux, MacOS neu MacOSX os ydynt ar eich peiriant.\n"
-"Fel rheol, mae'r systemau gweithredu hyn yn cael eu canfod yn gywir a'u\n"
-"gosod. Os nad yw hyn yn digwydd, mae modd i chi ychwanegu eu cofnod\n"
-"gyda llaw ar y sgrĂźn hwn. Byddwch ofalus i ddewis y paramedrau cywir.\n"
-"\n"
-"Prif ddewisiadau Yaboot yw:\n"
-"\n"
-" * Cychwyn Neges: neges testun syml sy'n cael ei ddangos cyn yr anogwr\n"
-" cychwyn\n"
-"\n"
-" * Cychwyn y Ddyfais: yn dangos lle rydych am osod yr wybodaeth\n"
-"angenrheidiol i gychwyn GNU/Linux. Yn gyffredinol, byddwch wedi creu\n"
-"rhaniad ymlwythwr yn gynt, i ddal yr wybodaeth.\n"
-"\n"
-" * Oediad Open Firmware: yn wahanol i LILO, mae yna ddau oediad ar gael\n"
-"gyda yaboot. Mae'r cyntaf yn cael ei fesur mewn eiliadau a dyma pryd hyn\n"
-"mae modd dewis rhwng CD, cychwyn OF, MacOS neu Linux\n"
-"\n"
-" * Oediad Cychwyn y Cnewyllyn: mae'r oediad yn debyg i oediad cychwynLILO. "
-"Wedi dewis Linux, bydd oediad o 0.1 eiliad cyn bod eich cnewyllyn\n"
-"rhagosodedig yn cael ei ddewis.\n"
-"\n"
-" * Galluogi Cychwyn o'r CD?: mae dewis hwn yn caniatĂĄu i chi ddewis \"C\"\n"
-"am CD ar anogwr y cychwyn cyntaf.\n"
-"\n"
-" * Galluogi Cychwyn OF?: mae dewis hwn yn caniatĂĄu i chi ddewis |\"N\"\n"
-"am Open Firmware ar anogwr y cychwyn cyntaf.\n"
-"\n"
-" * System Weithredu Rhagosodedig: mae modd dewis pa system weithredu\n"
-"fydd yn cychwyn drwy ragosodiad pan ddaw'r Open Firmware i ben."
+msgid "Loopback"
+msgstr "Cylch-ĂŽl"
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
msgstr ""
-"Mae modd i chi gynnig cofnodion eraill ar gyfer yaboot, un ai systemau\n"
-"gweithredol eraill, cnewyll eraill, neu ddelwedd cychwyn argyfwng.\n"
-"\n"
-"Ar gyfer systemau gweithredu eraill, mae'r cofnod yn cynnwys label a'r\n"
-"rhaniad root yn unig\n"
-"\n"
-"Ar gyfer LInux, mae yna rhai dewisiadau:\n"
-"\n"
-" *Label:sef yr enw fyddwch yn ei deipio yn anogwr yaboot i ddewis ydewis "
-"cychwyn.\n"
-"\n"
-" *Image: hwn fydd enw'r cnewyllyn i'w gychwyn. Fel rheol, vimlinux neu\n"
-"amrywiad ohono gydag estyniad\n"
-"\n"
-" *Root: y ddyfais \"root\" neu \"/\" ar gyfer eich gosodiad Linux.\n"
-"\n"
-" *Append: ar galedwedd Apple, mae dewis atodi cnewyllyn yn cael ei\n"
-"ddefnyddio'n eithaf aml i gynorthwyo cychwyn caledwedd fideo neu i\n"
-"alluogi efelychiad o'r llygoden bysellfwrdd sydd ar goll ar yr ail a'r "
-"trydydd\n"
-"botwm llygoden llygod arferol Apple. Dyma rhai enghreifftiau:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: mae modd defnyddio'r dewis hwn i un ai lwytho'r modiwlau "
-"cychwynnol,\n"
-" cydnabod y ddyfais cychwyn ar gael, neu i lwytho delwedd ramdisg ar gyfer\n"
-" cychwyn argyfwng.\n"
-"\n"
-" * Initrd-size: maint y ddelwedd ramdisg arferol yw 4,096bid. Os ydych "
-"angen\n"
-"dyrannu ramdisg mawr, mae modd defnyddio'r dewis hwn.\n"
-"\n"
-" * Read-write:fel rheol mae'r rhaniad \"root\" yn cael ei agor fel darllern "
-"yn unig, i\n"
-" ganiatĂĄu gwiriad system ffeiliau cyn i'r system ddod yn \"fyw\". Yma mae "
-"modd\n"
-" diystyru'r dewis hwn.\n"
-"\n"
-" * NoVideo: petai caledwedd Apple yn profi i fod yn peri anawsterau "
-"sylweddol,\n"
-" mae modd i chi ddewis cychwyn mewn modd \"novideo\", gyda chynhaliaeth\n"
-" ffrĂąm byffer cynhenid\n"
-"\n"
-" * Default: dyma'r cyflwr rhagosodedig, dewiswch hwn drwy bwyso ENTER at\n"
-" anogwr yaboot. Bydd y cofnod hefyd wedi ei amlygu gyda \"*\", os wnewch "
-"chi\n"
-" bwyso ar [Tab] i weld dewisiadau'r cychwyn."
+"Methu cau mkbootdisk yn iawn: \n"
+" %s \n"
+" %s"
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"Bydd DrakX yn canfod unrhyw ddyfais IDE sydd ar eich cyfrifiadur. Bydd yn\n"
-"chwilio am un neu fwy o gardiau SCSI PCI ar eich system. Os oes Cerdyn\n"
-"SCSI'n cael ei ganfod bydd DrakX yn awtomatig yn gosod y gyrrwr priodol.\n"
-"\n"
-"Oherwydd nad yw canfod caledwedd bob tro'n canfod darn o galedwedd,\n"
-"gall DrakX fethu canfod eich dsgiau caled. Os felly, bydd rhaid i chi bennu\n"
-"eich caledwedd Ăą llaw.\n"
-"Os ydych wedi pennu eich addaswr PCI SCS gyda llaw, bydd DrakX yn\n"
-"gofyn i chi ydych am bennu dewisiadau ar ei gyfer. Dylech adael i DrakX "
-"ofyn\n"
-"i'r cerdyn am ddewisiadau penodol i'r cerdyn mae angen i'r caledwedd eu\n"
-"cychwyn. Mae hyn fel rheol yn gweithio'n dda\n"
-"\n"
-"Os nad yw DrakX yn medru holi am y dewisiadau sydd eu hangen, bydd rhaid i\n"
-" chi ffurfweddu'r gyrrwr gyda llaw. "
+msgid "West Europe"
+msgstr "Gorllewin Ewrop"
-#: ../../help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
msgstr ""
-"Yma byddwn yn dewis system argraffu i'ch cyfrifiadur ei ddefnyddio. Efallai\n"
-"bod systemau eraill yn cynnig un i chi, ond mae Mandrake yn cynnig dwy.\n"
-"Mae 'r systemau'n addas gar gyfer ffurfweddiad arbennig.\n"
-"\n"
-" *\"pdq\" - sy'n golygu \"print, don't queue\", yw'r dewis os oes gennych\n"
-"gysylltiad uniongyrchol Ăą'ch argraffydd a'ch bod eisiau medru tynnu allan o "
-"waith\n"
-"argraffu pan fo'r papur wedi mynd yn sownd ac nad oes gennych argraffyddion\n"
-"wedi eu cysylltu drwy rwydwaith. (\"Dim ond rhwydweithiau syml mae \"pdq\" "
-"yn ei\n"
-"drin ac mae'n araf ar rwydweithiau) Dewiswch \"pdq\" os mai dyma yw eich\n"
-"tro cyntaf yn GNU/Linux.\n"
-" *\"CUPS\" - \"Common Unix Printing System\". Mae hwn yn dda ar gyfer\n"
-"argraffu i argraffyddion lleol a hanner ffordd rownd y byd. Mae'n symlach, "
-"yn\n"
-"medru gweithredu fel gwasanaethwr neu cleient ar gyfer yr hen system \"lpd"
-"\"\n"
-"felly mae'n cydweddi Ăą'r systemau sydd wedi mynd o'i flaen. Mae'n gallu "
-"gwneud\n"
-"nifer o driciau, ond mae bron mor syml i'w osod \"pdq\". Os ydych amgen "
-"hwn\n"
-"i efelychu gwasanaethwr \"lpd\", yna rhaid cychwyn daemon \"cups-lpd\".\n"
-"Mae gan \"CUPS\" wyneb graffigol ar gyfer argraffu neu rheoli'r argraffu.\n"
+"[DEWISIADAU] [ENW_RHAGLEN]\n"
"\n"
-"Os ydych yn dewis yn awr ac yn ddiweddarach yn penderfynu eich bod\n"
-"am newid eich system argraffu gallwch ei newid drwy gyfrwng PrinterDrake\n"
-"yng Nghanolfan Rheoli Mandrake a chlicio'r botwm arbenigwr."
+"DEWISIADAU:\n"
+" --help - argraffu'r neges cymorth.\n"
+" --report - dylai'r rhaglen fod yn un o offer mandrake\n"
+" --incident - ylai'r rhaglen fod yn un o offer mandrake"
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
-msgstr ""
-"Cychwynnydd GNU/Linux yw LILO a grub. Fel rheol mae'r rhan yma'n\n"
-"digwydd yn awtomatig. Bydd DrakX yn dadansoddi'r adran cychwyn\n"
-"disg a gweithredu yn Ăą'r yr hyn mae'n ei ganfod yno.\n"
-"\n"
-" *os yw'n canfod adran cychwyn Windows, bydd yn ei amnewid gyda\n"
-"adran cychwyn grub/LILO. O ganlyniad bydd modd i chi gychwyn un\n"
-"ai GNU/Linux neu system arall.\n"
-"\n"
-" *os fydd adran gychwyn grub neu LILO'n cael ei ganfod bydd yn ei\n"
-"amnewid gydag un mwy diweddar.\n"
-"\n"
-"Os nad yw'n medru penderfynu, bydd DrakX yn gofyn i chi lle i osod\n"
-"y cychwynnydd.\n"
-"\"Dyfais cychwyn\": fel rheol ni fydd angen i chi newid o'r rhagosodedig\n"
-"(\"Adran gyntaf gyrrwr (MBR)\"), ond os yw'n well gennych mae modd\n"
-"gosod y cychwynnydd ar yr ail ddisg caled (\"/dev/hdb\"), neu hyd yn\n"
-"oed, ar ddisg meddal (\"Disg Meddal\")."
+msgid "Harddrake2 version %s"
+msgstr "Harddrake2 fersiwn %s"
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-"Ar ĂŽl ffurfweddu paramedrau cyffredinol y cychwynnwr, bydd y rhestr o\n"
-"ddewisiadau cychwyn ar gael wrth gyvchwyn yn cael eu harddangos.\n"
-"\n"
-"Os oes yna systemau gweithredu eraill ar eich cyfrifiadur byddant yn cael\n"
-"eu hychwanegu i'r ddewislen cychwyn. Mae modd addasu'r dewisiadau\n"
-"eraill dwy glicio \"Ychwanegu\" i greu cofnod newydd; dewis cofnod\n"
-"a chlicio \"Newid\" neu \"Tynnu\" i'w nweid neu ei dynnu. Mae \"Iawn\"\n"
-"yn gwirio'r newidiadau\n"
-"\n"
-"Efallai na fyddwch eisiau rhoi mynediad i'r systemau gweithredu hyn i neb\n"
-"arall fydd yn mynd i'r consol ac yn ailgychwyn y cyfrifiadur. Gallwch "
-"ddileu'r\n"
-"cofnodion perthnasol o'r system weithredu i'w tynnu o ddewislwn y\n"
-"cychwynnwr,ond bydd rhaid i chi greu disg cychwyn ar gyfer y systemau\n"
-"gweithredu eraill rheini!"
+msgid "Copying %s"
+msgstr "CopĂŻo %s"
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
-msgstr ""
-"Mae'r deialog yn caniatau i chi wenud mĂąn newidiadau i'ch cychwynnwr:\n"
-"\n"
-" * \"Cychwynnydd i'w ddefnyddio\": mae gennych dri dewis:\n"
-"\n"
-" * \"GRUB\":os mae'n well gennych grub (dewislen testun)\n"
-"\n"
-" * \"LILO\" gyda dewislen raffigol\": os mae'n well gennych LILO gyda'i\n"
-"rhagwyneb graffigol.\n"
-"\n"
-" * \"LILO\" gyda dewislen raffigol\": os mae'n well gennych rhagwyneb "
-"dewislen\n"
-"testun.\n"
-"\n"
-" * \"Dyfais cychwyn\": yn y rhan fwyaf o achosion ni fyddwch yn newid\n"
-"y rhagosodedig (\"/dev/hda\"), ond os mae'n well gennych, gall y\n"
-"cychwynnydd gael ei osod ar yr ail ddisg caled (\"/dev/hdb\"), neu hyd\n"
-"yn oed ar ddisg meddal (\"/dev/fd0\")\n"
-"\n"
-" * \"Oedi cyn cychwyn y ddelwedd rhagosodedig\": wrth ail gychwyn y "
-"cyfrifiadur\n"
-"dyma'r oedi sy'n caniatĂĄu i'r defnyddiwr ddewis o fewn y ddewislen "
-"cychwynnydd,\n"
-"cychwynnydd arall yn lle'r un rhagosodedig.\n"
-"\n"
-"!!Gofalwch, os nad ydych yn gosod llwythwr cychwyn, (drwy ddewis \"Diddymu\" "
-"yma),\n"
-"rhaid i chi wneud yn siwr fod gennych fodd i gychwyn eich system Linux "
-"Mandrake.\n"
-"Hefyd, gwnewch yn siwr eich bod yn gwybod beth rydych yn ei wneud cyn newid "
-"y\n"
-"dewisiadau hyn!!\n"
-"\n"
-"Bydd clicio'r botwm \"Uwch\" yn y ddeialog yn cynnig nifer o ddewisiadau "
-"uwch,\n"
-"sydd yn cael eu cadw ar gyfer y defnyddiwr arbenigol."
+msgid "Choose color"
+msgstr "dewis lliw"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
-msgstr ""
-"Mae hwn yn fan pwysig ynghylch diogelwch eich system GNU/Linux; rhaid\n"
-"rhoi cyfrinair \"root\".\"root\" yw gweinyddwr y system a'r unig un sydd Ăą'r "
-"hawl\n"
-"i wneud diweddariadau, ychwanegu defnyddwyr, newid ffurfweddiad cyffredinol\n"
-"y system, ac yn y blaen. Yn fyr mae \"root\" yn medru gwneud popeth! Dyna\n"
-"pam mae'n rhaid dewis cyfrinair sy'n anodd ei ddyfalu - bydd DrakX yn dweud\n"
-" wrthych os yw'n rhy hawdd. Fel y gwelwch, mae modd peidio gorfod cynnig\n"
-" cyfrinair, ond rydym yn argymell yn erbyn hyn, hyd yn oed am un rheswm:\n"
-" peidiwch Ăą meddwl bod eich systemau gweithredu eraill yn ddiogel rhag\n"
-" camgymeriadau, gan eich bod wedi cychwyn o GNU/Linux. Gan fod \"root\" yn\n"
-" medru goresgyn unrhyw gyfyngiadau a dileu data'n anfwriadol ar bob "
-"rhaniad,\n"
-" drwy fynd at y rhaniadau'n ddi-hid, yna mae'n bwysig ei gwneud hi'n anodd "
-"bod\n"
-" yn \"root\".n\n"
-"\n"
-"Dylai'r cyfrinair fod yn gyfuniad o rifau a llythrennau ac o leiaf 8 nod o "
-"hyd.\n"
-" Peidiwch ysgrifennu'r cyfrinair ar bapur - bydd yn ei gwneud hi'n rhy "
-"hawdd\n"
-" gwanhau'r system.\n"
-"\n"
-"Er hynny, peidiwch Ăą gwneud y cyfrinair yn rhy hir neu gymhleth am fod rhaid "
-"i\n"
-"chi fedri ei gofio heb ormod o drafferth.\n"
-"\n"
-"Ni fydd y cyfrinair yn cael ei ddangos ar y sgrin wrth i chi ei deipio. "
-"Felly bydd\n"
-" rhaid i chi deipio'r cyfrinair ddwywaith i leihau'r siawns o deipio gwall. "
-"Os ydych\n"
-"yn digwydd gwneud yr un gwall teipio ddwywaith, bydd rhaid defnyddio'r "
-"cyfrinair\n"
-" \"anghywir\" i gychwyn y tro cyntaf.\n"
-"\n"
-"Os hoffech i fynediad i'r cyfrifiadur gael ei reoli gan wasanaethwr dilysu, "
-"cliciwch\n"
-"y botwm \"Uwch\".\n"
-"Os yw eich rhwydwaith yn defnyddio protocol gwasanaethau dilysu LDAP, NIS\n"
-"neu PDC Windows Domain, dewiswch un addas fel \"dilysu\",\n"
-"Os nad ydych yn gwybod, gofynnwch i'ch gweinyddwr rhwydwaith\n"
-"\n"
-"Os ydych yn cael anhawsterau atgoffa cyfrineiriau, gallwch ddewis\n"
-"\"Dim cyfineiriau\", os na fydd eich cyfrifiadur yn cael cyswllt Ăą'r we ac "
-"rydych\n"
-"yn ymddiried yn y defnyddiwr."
+msgid "Dominican Republic"
+msgstr "Dominican Republic"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Dewiswch y porth cywir. Mae porth \"COM1\" o dan MS Windows yn cael ei alw "
-"yn\n"
-"\"ttyS0\" yn GNU/Linux, e.e."
+msgid "Swaziland"
+msgstr "Swaziland"
-#: ../../help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
-msgstr ""
-"Drwy ragosodiad mae DrakX yn cymryd bod gennych lygoden dau fotwm\n"
-"a bydd yn ei osod i efelychu botwm tri. Bydd DrakX yn gwybod yn awtomatig\n"
-"p'un a'i yw'n lygoden PS/2, cyfresol neu USB.\n"
-"\n"
-" Os hoffech chi bennu math arall o lygoden, dewiswch y math priodol o'r "
-"rhestr.\n"
-"\n"
-"Os byddwch yn dewis llygoden ar wahĂąn i'r rhagosodedig, byddwch yn gweld\n"
-"ffenestr profi'r llygoden. Defnyddiwch y botymau a'r olwyn i wneud yn siwr "
-"fod\n"
-"y gosodiadau'n gweithio. Os nad yw'r llygoden yn gweithio'n iawn pwyswch\n"
-"ar y bylchwr neu [Return] i \"Dileu\" a dewis eto.\n"
-"\n"
-"Weithiau ni fydd llygod olwyn yn cael eu canfod yn awtomatig. Bydd rhaid i "
-"chi\n"
-"eu dewis o'r rhestr. Gwnewch yn siwr eich bod yn dewis yr un sy'n cyfateb "
-"i'r porth\n"
-"mae wedi ei gysylltu iddo. Wedi i chi wasgu'r botwm \"Nesaf ->\" bydd "
-"delwedd\n"
-"llygoden yn cael ei ddangos. Bydd angen i chi symud olwyn y llygoden iddo \n"
-"weithio'n gywir. Wrth i chi wedl yr olwyn sgroli ar y sgrĂźn yn symud wrth i "
-"chi droi'r\n"
-"olwyn, profwch y botymau a gwirio fod cyfeirydd y llygoden yn symud ar y "
-"sgrin\n"
-"wrth i chi symud eich l;lygoden."
+msgid "Set-UID"
+msgstr "Set-UID"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
-msgstr ""
-"Dewiswch eich dewis iaith ar gyfer y gosod a'r defnydd o'r system yn\n"
-"effeithio iaith y ddogfennaeth, y gosodwr a'r system yn gyffredinol.\n"
-"Dewiswch eich ardal ac yna eich iaith.\n"
-"\n"
-"Bydd clicio ar y botwm \"Uwch\" yn caniatĂĄu i chi ddewis ieithoedd eraill\n"
-"i'w gosod ar eich peiriant gwaith. Bydd dewis ieithoedd eraill yn gosod\n"
-"ffeiliau penodol sy'n cynnwys dogfennaeth a rhaglenni yn yr ieithoedd\n"
-" hynny. Er enghraifft, os ydych yn westeiwr ar gyfer defnyddwyr o Sbaen,\n"
-" dewiswch \"Gymraeg\" fel y brif iaith yng ngolwg coeden ac yn yr Uwch\n"
-" cliciwch ar y seren lwyd sy'n cyfateb i \"Sbaeneg\". \n"
-"\n"
-"Sylwer bod modd gosod mwy nag un iaith. Mae modd i chi ddewis mwy\n"
-"nag un, neu hyd yn oed eu gosod i gyd, drwy ddewis y blwch \"Pob iaith\".\n"
-"Mae dewis cefnogaeth i bob iaith yn golygu gosod cyfieithiadau, ffontiau, \n"
-"gwiryddion sillafu, ag ati, ar gyfer yr iaith honno.Yn ychwanegol mae dewis\n"
-"\"Defnyddio Unicode\" yn gorfodi'r system i ddefnyddio unicode (UTF-8).\n"
-"Sylwer mai nodwedd arbrofol yw hon . Os ydych yn dewis ieithoedd\n"
-"gwahanol sy'n defnyddio amgodiad gwahanol bydd y cefnogaeth i utf-8\n"
-"yn cael ei osod, beth bynnag.\n"
-"\n"
-"I newid rhwng yr ieithoedd amrywiol sydd ar y system medrwch gychwyn\n"
-"y gorchymyn \"/usr/sbin/localedrake\" fel \"gwraidd\" i newid yr iaith\n"
-"sy'n cael ei ddefnyddio gan y system gyfan. Bydd rhedeg y gorchymyn fel\n"
-"defnyddiwr cyffredin yn gweithio dim ond ar gyfer yr unigolyn hwnnw."
+msgid "Please check if you are using CDRW media"
+msgstr "Gwiriwch os ydych yn defnyddio cyfrwng CDRW"
#: ../../help.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
msgstr ""
-"Fel arfer mae DrakX yn dewis y bysellfwrdd cywir ar eich cyfer ( gan "
-"ddibynnu pa\n"
-" iaith rydych wedi ei ddewis) ac ni fyddwch yn gweld y cam hwn. Er hynny,\n"
-"efallai nad oes gennych fysellfwrdd sy'n cyfateb yn union i'ch iaith: e.e., "
-"os ydych\n"
-"yn Americanwr sy'n siarad Cymraeg, efallai eich bod am gadw eich "
-"bysellfwrdd\n"
-"Americanaidd. Neu os ydych yn siarad Cymraeg ac yn byw yn Hong Kong mae'r\n"
-" un sefyllfa'n codi. Yn y ddwy achos bydd angen i chi fynd yn ĂŽl i'r cam yma "
-"yn y\n"
-" gosodiad a dewis y bysellfwrdd perthnasol o'r rhestr.\n"
-"\n"
-"Cliciwch ar fotwm \"Rhagor\" i dderbyn y rhestr lawn o fysellfyrddau sy'n "
-"cael eu\n"
-" cynnal.\n"
-" \n"
-"Os fyddwch yn dewis cynllun bysellfwrdd wedi ei seilio ar wyddor an-"
-"Lladinaidd, \n"
-"bydd y deialog nesaf yn caniatĂĄu i chi ddewis rwymiad allwedd fydd yn newid "
-"y\n"
-"bysellfwrdd rhwng cynlluniau Lladin ac an-Lladin."
+"Dewiswch y ddisg galed rydych am ei ddileu er mwy n gosod eich rhaniad\n"
+"Mandrake Linux newydd. Byddwch ofalus, bydd yr holl ddata sydd arno'n\n"
+"cael ei ddileu ac ni fydd modd ei adfer!"
-#: ../../help.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
-"Mae'r cam hwn yn cael ei weithredu os oes hen raniad GNU/Linux wedi\n"
-"ei ganfod ar y cyfrifiadur.\n"
-"\n"
-"Bydd DrakX angen gwybod a ydych am osod o'r newydd neu uwchraddio\n"
-"system Mandrake Linux presennol.\n"
-"\n"
-" *\"Gosod\" Ar y cyfan, mae hwn yn tynnu'r hen system gyfan oddi ar eich\n"
-"cyfrifiadur. Os ydych am newid rhaniadau eich disgiau caled, neu newid y\n"
-"system ffeil, dylech ddewis hwn. Er hynny, yn ddibynnol ar eich trefn\n"
-"rhannu, mae modd atal peth o'ch data rhag cael ei ysgrifennu drosto gan\n"
-"y gosodiad newydd.\n"
-" *\"Uwchraddio\": mae'r dosbarth gosod hwn yn caniatĂĄu i chi ddiweddaru'r\n"
-"pecynnau sydd wedi eu gosod ar eich system Mandrake Linux. Bydd eich\n"
-"rhaniadau presenol a'ch data personol yn cael eu cadw. Bydd y rhan fwyaf\n"
-"o'r camau ffurfweddu ar gael fel gyda'r gosod arferol.\n"
-"\n"
-"Dylai defnyddio \"Uwchraddio\" weithio'n iawn ar systemau Mandrake Linux\n"
-"sy'n rhedeg systemau \"8.1\" neu'n ddiweddarach. Nid yw uwchraddio\n"
-"fersiynau cyn Mandrake Linux \"8.1\" yn cael ei gymeradwyo."
+msgid " on parallel port \\#%s"
+msgstr " ar borth paralel \\#\"%s"
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
-"\"Gwlad\":gwiriwch y dewis gwlad. Os nad ydych yn y wlad hon\n"
-"cliciwch y botwm \"Ffurfweddu\"a dewis un arall. Os nad yw eich\n"
-"gwlad ar y rhestr gyntaf, cliciwch \"Rhagor\" i wdrych ar y rhestr\n"
-"gyflawn."
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "Defnyddiwch allweddi %c a %c i ddewis pa gofnod i'w amlygu."
-#: ../../help.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Mae mwy nag un rhaniad Microsoft wedi ei ganfod ar eich disg caled.\n"
-"Dewiswch ba un rydych am newid ei faint er mwyn gosod eich\n"
-"system weithredu Mandrake Linux newydd\n"
-"\n"
-"Mae pob rhaniad wedi ei restri fel hyn: \"Enw Linux\", \"Enw Microsoft\",\n"
-"\"Maint\".\n"
-"\n"
-"Mae \"Enw Linux\" wedi ei strwythuro fel hyn: \"math o ddisg caled\", \n"
-"\"rhif y disg caled\", \"rhif y rhaniad\" (e.e., \"hda1\").\n"
-"\n"
-"\"hd\" yw'r \"Math o ddisg caled\" os mai disg caled IDE sydd gennych\n"
-"a \"sd\" yw disg caled SCSI.\n"
-"\n"
-"Llythyren wedi'r \"hd\" neu \"sd\" yw'r \"Rhif disg caled\" bob tro.\n"
-"Gyda disgiau caled IDE:\n"
-"\n"
-" * mae \"a\" yn golygu \"prif ddisg caled ar y rheolydd IDE cyntaf\",\n"
-"\n"
-" * mae \"b\" yn golygu \"ddisg caled gwas ar y rheolydd IDE cyntaf\",\n"
-"\n"
-" * mae \"c\" yn golygu \"prif ddisg caled ar yr ail reolydd IDE\",\n"
-"\n"
-" * mae \"d\" yn golygu \"ddisg caled gwas ar yr ail reolydd IDE\",\n"
-"\n"
-"Gyda disgiau caled SCSI mae \"a\" yn golygu'r \"enw SCSI isaf\", ac mae\n"
-" \"b\" yn golygu'r \"ail enw SCSI isaf\", ag ati.\n"
-"\n"
-"Mae \"Enw Windows\" yn cyfeirio at y llythyren y disg caled o dan\n"
-" Windows (\"C:\" yw'r ddisg neu raniad cyntaf)."
+msgid "Generic 2 Button Mouse"
+msgstr "Llygoden 2 Fotwm Generig"
-#: ../../help.pm:1
+#: ../../lvm.pm:1
#, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Yn awr mae angen i chi ddewis pa raniadau i'w defnyddio ar gyfer gosodiad\n"
-"eich system Mandrake Linux. Os oes rhaniadau wedi eu diffinio eisoes, un\n"
-"ai drwy osodiad blaenorol o GNU/Linux neu gan offeryn rhannu arall, mae\n"
-"modd i chi ddefnyddio'r rhaniadau presennol. Os nad, rhaid i' rhaniadau'r\n"
-"ddisg caled gael eu diffinio.\n"
-"\n"
-"I greu rhaniadau, rhaid yn gyntaf ddewis disg caled. Mae modd dewis disg\n"
-"i'w rannu drwy glicio ar \"hda\" ar gyfer y ddisg IDE cyntaf., \"hdb\" ar\n"
-"gyfer yr ail, \"sda\" ar gyfer y ddisg SCSI cyntaf, ac yn y blaen.\n"
-"\n"
-"I greu'r rhaniad, mae modd defnyddio'r dewisiadau hyn:\n"
-"\n"
-" *\"Clirio'r cyfan\": mae'r dewis hwn yn dileu pob rhaniad ar ddisg.\n"
-"\n"
-" *\"Awto ddynodi\": mae'r dewis hwn yn caniatĂĄu i chi greu'n awtomatig\n"
-"Ext2 a rhaniadau cyfnewid mewn lle gwag ar eich disg.\n"
-"\n"
-" *\"Rhagor\": yn rhoi mynediad i ragor o nodweddion:\n"
-"\n"
-" *\"Cadw'r tabl rhaniad\": mae hwn yn cadw'r tabl rhaniad i ddisg\n"
-"meddal. Mae hyn yn ddefnyddiol ar gyfer adfer tabl rhaniad, os fydd angen\n"
-"\n"
-" \"Adfer y tabl rhaniad\": mae hyn yn caniatĂĄu adfer tabl rhaniad "
-"blaenorol\n"
-"o ddisg meddal.\n"
-"\n"
-" \"Achub y tabl rhaniad\": os yw eich tabl rhaniad wedi ei ddifrodi, mae "
-"modd\n"
-"ceisio ei adfer drwy'r dewis yma. Byddwch ofalus a chofiwch fod modd iddo\n"
-"fethu.\n"
-"\n"
-" \"Ai-lwytho'r tabl rhaniad\": mae hwn yn dileu pob newid ac yn ail "
-"lwytho'r\n"
-"tabl rhaniad gwreiddiol.\n"
-"\n"
-" *\"Awto osod cyfrwng symudol\": dad-diciwch y dewis hwn i osod a dad "
-"osod\n"
-"gyda llaw, cyfryngau symudol megis disgiau meddal ac CD-ROMau\n"
-"\n"
-" *\"Dewin\": defnyddiwch y dewis hwn os ydych am ddefnyddio'r dewin i "
-"rannu\n"
-"eich disg caled. Dyma'sydd orau os nad oes gennych wybodaeth sylweddol ar\n"
-"rhannu\n"
-"\n"
-" *\"Dadwneud\": defnyddiwch y dewis hwn i ddileu eich newidiadau\n"
-"\n"
-" *\"Newid o'r modd arferol/arbenigwr\": mae hwn yn caniatĂĄu "
-"gweithredoedd\n"
-"pellach ar raniadau. (Math, dewisiadau, fformat) ac mae'n cynnig mwy o\n"
-" wybodaeth.\n"
-"\n"
-" *\"Gorffen\":pan fyddwch wedi gorffen rhannu eich disg, bydd hwn yn cadw\n"
-" eich newidiadau yn ĂŽl i'r ddisg\n"
-"\n"
-"Sylwer: mae modd cyrraedd y dewisiadau drwy'r bysellfwrdd. Symudwch drwy'r\n"
-" rhaniadau gan ddefnyddio [Tab] a'r saethau [I Fyny/I Lawr].\n"
-"\n"
-"Pan fydd rhaniad wedi ei ddewis, medrwch ddefnyddio:\n"
-"\n"
-" *Ctrl-c i greu rhaniad newydd (pan fo rhaniad gwag yn cael ei ddewis);\n"
-"\n"
-" *Ctrl-d i ddileu rhaniad;\n"
-"\n"
-" *Ctrl-m i greu pwynt gosod;\n"
-"\n"
-"I dderbyn gwybodaeth am yr amrywiol systemau ffeil sydd ar gael, darllenwch "
-"y\n"
-" pennawd ar ext2fs yn y ``Reference Manual''.\n"
-"\n"
-"Os ydych yn gosod ar beiriant PPC, bydd angen i chi greu \"ymlwythwr\" HFS\n"
-" bychan o leiaf 1MB o faint, fydd yn cael ei ddefnyddio gan ymlwythwr "
-"yaboot.\n"
-"Os ydych yn dewis gwneud y rhaniad rhywfaint yn fwy, dyweder tua 50MB, yna\n"
-"gall fod yn le defnyddiol i gadw cnewyllyn sbĂąr a delweddau ramdisk ar "
-"gyfer\n"
-" sefyllfaoedd cychwyn argyfyngus!"
+msgid "Remove the logical volumes first\n"
+msgstr "Tynnu'r cyfrolau rhesymegol yn gyntaf\n"
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Yma mae angen dewis lefel diogelwch ar gyfer y peiriant. Fel rheol,\n"
-"y mwyaf agored yw'r peiriant, y mwyaf pwysig yw'r data yr uchaf\n"
-"ddylai'r lefel diogelwch fod neu fod gan y peiriant gysylltiad uniongyrchol\n"
-"gyda'r rhyngrwyd. Er hynny, mae diogelwch yn dod ar draul\n"
-"hwylustod. \n"
-"\n"
-"Os nad ydych yn siwr beth i'w ddewis, dewiswch y rhagosodedig."
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "Bydd y cofnod wedi ei amlygu'n cychwyn yn awtomatig ymhen %d eiliad."
-#: ../../help.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
msgstr ""
-"Ar yr adeg pan fyddwch yn gosod Mandrake Linux, mae'n debygol y bydd\n"
-"rhai pecynnau wedi eu diweddaru ers y rhyddhad cychwynnol. Bydd rhai \n"
-"gwallau wedi eu cywiro a materion diogelwch wedi eu datrys. I ganiatĂĄu\n"
-"i chi fanteisio ar hyn mae cynnig i chi eu llwytho i lawr o'r rhyngrwyd.\n"
-"Dewiswch \"Iawn\" os oes gennych gyswllt gweithredol Ăą'r rhyngrwyd,\n"
-"neu \"Na\"os ydych am osod pecynnau mwy diweddar rhywbryd eto.\n"
-"\n"
-"Bydd dewis \"Iawn\" yn dangos rhestr o leoedd o le mae modd derbyn\n"
-"diweddariadau. Dewiswch yr un agosaf atoch. Yna, bydd coeden dewis\n"
-"pecynnau yn ymddangos: Wedi i chi benderfynu ar eich dewis, cliciwch\n"
-"\"Gosod\" i estyn a gosod y pecynnau hynny neu \"Diddymu\" i beidio."
+"Methu ysgrifennu /etc/sysconfig/bootsplash.\\\\\n"
+"Heb ganfod y ffeil"
-#: ../../help.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet access"
+msgstr "Mynediad i'r Rhyngrwyd"
+
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
+"y coordinate of text box\n"
+"in number of characters"
msgstr ""
-"Rhaid i bob rhaniad sydd newydd eu henwi gael eu fformatio ar gyfer eu\n"
-"defnyddio (mae fformatio'n golygu creu system ffeilio)\n"
-"\n"
-"Efallai y byddwch eisiau ailfformatio rhai rhaniadau presennol i ddileu "
-"data\n"
-"sydd arnynt. Os ydych am wneud hynny, dewiswch y rhaniadau hynny hefyd.\n"
-"\n"
-"Sylwch nad oes angen ailfformatio'r holl raniadau sy'n bodoli eisoes. "
-"Rhaid \n"
-"ailfformatio'r rhaniadau sy'n cynnwys y system weithredu [megis \"/\",\"usr"
-"\"\n"
-"neu \"/var\") ond nid oes rhaid i chi ail fformatio rhaniadau sy'n cynnwys\n"
-"data rydych am ei gadw (e.e. \"/home\").\n"
-"\n"
-"Byddwch ofalus wrth ddewis rhaniadau. Ar ĂŽl fformatio bydd yr holl ddata ar\n"
-"y rhaniadau'n cael eu dileu ac ni fydd modd ei adfer.\n"
-"\n"
-"Cliciwch \"Nesaf ->\" pan ydych yn barod i fformatio rhaniadau.\n"
-"\n"
-"Cliciwch \"<- Cynt\" os ydych am ddewis rhaniad arall ar gyfer eich "
-"gosodiad\n"
-"Mandrake Linux newydd\n"
-"\n"
-"Cliciwch \"Uwch\" os ydych am ddewis rhaniadau i'w gwirio am flociau\n"
-"gwallus ar y ddisg."
+"blwch testun cydfesuryn y\n"
+"mewn rhif nodau"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
msgstr ""
-"Dyna ni. Mae'r gosodiad wedi ei gwblhau ac mae eich system GNU/Linux\n"
-"yn barod i'w ddefnyddio. Cliciwch \"Nesaf ->\" i ailgychwyn y cyfrifiadur.\n"
-"Mae modd i chi gychwyn GNU/Linux neu Windows, prun bynnag sydd\n"
-"orau gennych (os oes gennych y ddwy system ar eich peiriant), gynted\n"
-"ag y bydd eich peiriant yn ail gychwyn. \n"
-"\n"
-"Mae'r botwm \"Uwch\" yn dangos dau fotwm arall:\n"
-"\n"
-" *\" creu disg meddal awto-gosod\": i greu disg meddal gosod fydd yn creu\n"
-"gosodiad cyflawn heb gymorth gweithredwr, yn debyg i'r gosodiad sydd\n"
-"newydd ei ffurfweddu.\n"
-"\n"
-"Sylwer bod dau ddewis gwahanol i'w gael wedi clicio'r botwm:\n"
-"\n"
-" *\"Ail chwarae\". Gosodiad rhannol awtomatig gan bod y cam o greu\n"
-"rhaniad yn cael ei hepgor.\n"
-"\n"
-" *Awtomeiddio\".Gosodiad cwbl awtomatig: mae'r disg caled wedi ei\n"
-"ailysgrifennu'n llwyr, a'r holl ddata wedi ei golli.\n"
-"\n"
-"Mae hwn yn nodwedd ddefnyddiol iawn pan yn gosod ar nifer fawr o\n"
-"beiriannau tebyg. Gw. yr adran Auto install ar ein safle gwe.\n"
-"\n"
-" *\"Cadw'r dewis o becynnau\":(*): mae hyn yn cadw'r dewis o becynnau\n"
-"wnaed cynt. Yna wrth wneud gosodiad arall, rhowch ddisg meddal yn y\n"
-"gyrrwr a rhedeg y gosodiad gan fynd i'r sgrĂźn cymorth drwy wasgu'r fysell\n"
-"[F1], a chyflwyno >>linux defcfg=\"disg meddal\"<<.\n"
-"\n"
-"(*) Bydd angen disg meddal wedi ei fformatio fel FAT (i greu un yn\n"
-"GNU/Linux, teipiwch \"mformat a:\")"
+"I edrych ar y rhestr o'r dewisiadau sydd ar gael ar gyfer yr argraffydd "
+"cyfredol cliciwch ar fotwm \"Rhestr dewisiadau argraffu\"."
-#: ../../help.pm:1
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Enabling servers..."
+msgstr "Galluogi gwasanaethwyr..."
+
+#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Printing test page(s)..."
+msgstr "Argraffu tudalen(nau) prawf..."
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "There is already a partition with mount point %s\n"
+msgstr "Mae yna eisoes raniad gyda phwynt gosod %s\n"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
"At this point, you need to decide where you want to install the Mandrake\n"
"Linux operating system on your hard drive. If your hard drive is empty or\n"
@@ -2326,51 +2210,49 @@ msgid ""
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
msgstr ""
"Yn awr mae angen i chi ddewis lle ar eich disg caled i osod eich\n"
"system weithredu Linux Mandrake. Os yw eich disg caled yn wag neu\n"
@@ -2434,280 +2316,138 @@ msgstr ""
"ydych yn ei wneud.. Am rhagor o wybodaeth ar sut i ddefnyddio DiskDrake, \n"
"darllennwch adran \"Managing your Partitions\" yn y \"Starter Guide\"."
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Yn y diwedd bydd gofyn i chi ddewis os ydych am weld rhyngwyneb graffig\n"
-"wrth gychwyn y cyfrifiadur. Sylwch y bydd y cwestiwn hwn yn cael ei ofyn\n"
-"hyd yn oed os nad ydych yn dewis profi'r ffurfweddiad. Yn amlwg, byddwch\n"
-"am ateb \"Na\" os yw eich peiriant i weithredu fel gwasanaethwr, neu os\n"
-"nad oeddech yn llwyddiannus yn cael eich dangosydd i ffurfweddu'n gywir.."
+msgid "Ukraine"
+msgstr "Wcrain"
-#: ../../help.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
-"Mewn achos lle mae gwasanaethwyr eraill i'w cael i'ch cerdyn, gyda\n"
-"neu heb gyflymydd 3D, mae cynnig i chi ddewis y gwasanaethwr gorau\n"
-"ar eich cyfer."
+msgid "Application:"
+msgstr "Rhaglen"
-#: ../../help.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
-msgstr ""
-"Cydraniad\n"
-"\n"
-" Cewch ddewis yma gydraniad a dyfnder lliw rhwng y rhai sydd ar gael\n"
-"ar gyfer eich caledwedd. Dewiswch yr un sydd orau ar eich cyfer (bydd\n"
-"modd newid hynny wedi'r gosod) Mae enghraifft o ffurfweddiad i'w weld\n"
-"ar y dangosydd."
+msgid "External ISDN modem"
+msgstr "Modem IDSN Allanol"
-#: ../../help.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
-msgstr ""
-"Dangosydd\n"
-"\n"
-" Mae'r gosodwr fel rheol yn canfod ac yn ffurfweddu'n awtomatig\n"
-"y dangosydd sy'n gysylltiedig Ăą'ch cyfrifiadur. Os nad yw hyn yn wir,\n"
-"dewiswch eich dangosydd."
+msgid "if set to yes, report check result by mail."
+msgstr "os wedi ei osod i iawn, adrodd y gwirio drwy e-bost"
-#: ../../help.pm:1
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Your choice? (default %s) "
+msgstr "Eich dewis? (rhagosodedig %s)"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
+msgstr "Datrys problemau"
+
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid " / Region"
+msgstr "Reunion"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
+"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
-"Test\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
"\n"
-"Options\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
-" You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
-"X (sef X System) yw calon rhyngwyneb graffigol GNU/Linux a'r hyn mae'r\n"
-"holl amgylcheddau graffigol (KDE, Gnome, AterStep, WindowMaker, etc)\n"
-"sy'n dod gyda Mandrake Linux yn dibynnu arno.\n"
-"\n"
-"Byddwch yn derbyn rhestr o baramedrau gwahanol i'w newid i gael\n"
-"y dangosiad graffigol gorau: Cerdyn Graffig\n"
-"\n"
-" Mae'r gosodwr fel rheol yn canfod ac yn ffurfweddu'n awtomatig\n"
-"y cerdyn graffig sydd ar eich cyfrifiadur. Os nad yw hyn yn wir,\n"
-"dewiswch eich cerdyn.\n"
-"\n"
-" Mewn achos lle mae gwasanaethwyr eraill i'w cael i'ch cerdyn, gyda\n"
-"neu heb gyflymydd 3D, mae cynnig i chi ddewis y gwasanaethwr gorau\n"
-"ar eich cyfer.\n"
-"\n"
+"Prawf gwall sain - rhedeg y gorchmynion canlynol:\n"
"\n"
-"Dangosydd\n"
"\n"
-" Mae'r gosodwr fel rheol yn canfod ac yn ffurfweddu'n awtomatig\n"
-"y dangosydd sy'n gysylltiedig Ăą'ch cyfrifiadur. Os nad yw hyn yn wir,\n"
-"dewiswch eich dangosydd.\n"
+"- \"lspcidrake -v | fgrep AUDIO\" pa yrrwyr i'w defnyddio\n"
+"drwy ragosodiad\n"
"\n"
-"Cydraniad\n"
+"- \"grep sound-slot /etc/modules.conf\" pa yrrwyr mae'n defnyddio\n"
+"ar hyn o bryd\n"
"\n"
-" Cewch ddewis yma gydraniad a dyfnder lliw rhwng y rhai sydd ar gael\n"
-"ar gyfer eich caledwedd. Dewiswch yr un sydd orau ar eich cyfer (bydd\n"
-"modd newid hynny wedi'r gosod) Mae enghraifft o ffurfweddiad i'w weld\n"
-"ar y dangosydd.\n"
+"- \"/sbin/lsmod\" gwirio os yw ei yrrwr wedi ei lwytho\n"
+"a'i peidio\n"
"\n"
-"Prawf\n"
+"- \"/sbin/chkconfig --list sound\" a \"/sbin/chkconfig --list alsa\" dangos\n"
+"os yw sain a gwasanaethau alsa services sydd wedi eu ffurfweddu yn rhedwg\n"
+"ar initlevel 3\n"
"\n"
-" bydd y system yn ceisio agor sgrĂźn graffigol yn unol Ăą'r cydraniad "
-"dewisol.\n"
-"Os ydych yn gweld y neges yn ystod y prawf ac ateb \"Iawn\", yna bydd\n"
-"DrakX yn symud ymlaen i'r cam nesaf. Os nad ydych yn gweld y neges nesaf\n"
-"mae'n golygu fod rhan o'r drefn awtoganfod yn anghywir a bydd y prawf\n"
-"yn dod iben ar Ăąl 12 eiliad, gan ddod a chi nĂŽl i'r ddewislen. Newidiwch y\n"
-"gosodiadau nes i chi gael y sgrĂźn i edrych yn iawn.\n"
-"Dewisiadau\n"
+"- \"aumix -q\" a yw'r sain wedi ei ddistewi a'i peidio\n"
"\n"
-" Yma cewch ddewis p'un ai i drefnu i'ch cyfrifiadur newid yn awtomatig i\n"
-"rhyngwyneb graffigol wrth gychwyn. Yn amlwg byddwch angen ticio \"Iawn\"\n"
-"os yw eich peiriant i weithredu fel gwasanaethwr, neu os na fuoch yn\n"
-"llwyddiannus yn ffurfweddu'r dangosydd."
+"- \"/sbin/fuser -v /dev/dsp\" pa rhaglen sy'n defnyddio'r cerdyn sain.\n"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
msgstr ""
-"Cerdyn Greaffig\n"
-"\n"
-" Mae'r gosodwr fel rheol yn canfod ac yn ffurfweddu'n awtomatig\n"
-"y cerdyn graffig sydd ar eich cyfrifiadur. Os nad yw hyn yn wir,\n"
-"dewiswch eich cerdyn o'r rhestr.\n"
+"Mae tudalennau prawf wedi eu hanfon i'r argraffydd.\n"
+"Gall gymryd amser cyn i'r argraffydd gychwyn.\n"
+"Statws argraffu:\n"
+"%s\n"
"\n"
-" Mewn achos lle mae gwasanaethwyr eraill i'w cael i'ch cerdyn, gyda\n"
-"neu heb gyflymydd 3D, mae cynnig i chi ddewis y gwasanaethwr gorau\n"
-"ar eich cyfer."
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
-msgstr ""
-"Mae GNU/Linux yn rheoli amser drwy GMT (Greenwich Mean Time)\n"
-"a'i drosi i amser lleol yn ĂŽl y parth amser rydych wedi ei ddewis.\n"
-"Mae'n bosib dad-ddewis hyn drwy ddad-ddewis \"Cloc caledwedd wedi ei\n"
-"osod i GMT\" fel bod y cloc caledwedd yr un a chloc y system yr un peth.\n"
-"Mae hyn yn ddefnyddiol pan fo'r peiriant yn westai i system arall megis\n"
-"Windows.\n"
-"\n"
-"Bydd y dewis \"Cydamseriad amser awtomatig\" yn rheoli'r cloc yn awtomatig\n"
-"drwy gysylltu Ăą gwasanaethwr amser ar y Rhyngrwyd. Yn y rhestr sy'n cael ei\n"
-"gynnig dewiswch yr agosaf atoch. Rhaid i'ch cyswllt Ăą'r we fod yn gweithio\n"
-"i hyn ddigwydd. Bydd yn gosod ar eich peiriant wasanaethwr amser fydd\n"
-"o ddewis yn medru cael ei ddefnyddio gan beiriannau eraill ar eich "
-"rhwydwaith."
+msgid "daily"
+msgstr "bob dydd"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Dewiswch pa wasanaethau rydych am eu cael wrth gychwyn eich cyfrifiadur.\n"
-"\n"
-"Bydd DrakX yn rhestri'r holl wasanaethau sydd ar gael gyda'r gosodiad "
-"cyfredol.\n"
-"Darllenwch y rhestr yn ofalus a dad-diciwch y rhai nad oes eu hangen bob "
-"tro\n"
-"wrth gychwyn.\n"
-"\n"
-"Mae modd cael esboniad byr am wasanaeth wrth eu dewis. Ond, os nad ydych\n"
-"yn siwr a yw'r gwasanaeth o werth neu beidio, mae'n well cadw at y drefn\n"
-"rhagosodedig\n"
-"\n"
-"!!Byddwch yn ofalus iawn os ydych am ddefnyddio eich peiriant fel "
-"gwasanaethwr:\n"
-"mwy na thebyg na fyddwch eisiau cychwyn unrhyw wasanaethau nad oes eu\n"
-"hangen. Cofiwch fod cael nifer o wasanaethau wedi eu galluogi ar y "
-"gwasanaethwr,\n"
-"fod yn beryglus. Yn gyffredinol, dim ond dewis y gwasanaethau mae'n rhaid eu "
-"cael.\n"
-"!!"
+msgid "and one unknown printer"
+msgstr "ac un argraffydd anhysbys"
-#: ../../help.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
-"\"Argraffydd\": mae clicio ar y botwm\"Ffurfweddu\" yn agor dewin\n"
-"ffurfweddu argraffydd. Darllenwch y pennawd penodol yn y 'Starter Guide'\n"
-"am ragor o wybodaeth am sut i osod argraffydd newydd. Mae'r rhyngwyneb\n"
-"yn debyg i'r un welwyd wrth osod y system."
+msgid "Ireland"
+msgstr "Iwerddon"
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "kernel version"
+msgstr "fersiwn cnewyllyn"
+
+#: ../../standalone/drakbackup:1
#, c-format
+msgid " Restore Configuration "
+msgstr " Adfer y Furfweddiad"
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Is this the correct setting?"
+msgstr "A' hwn yw'r gosodiad cywir?"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
@@ -2740,4623 +2480,4388 @@ msgstr ""
"Rhyngrwyd am fanylion ffurfweddiad, neu aros nes i'ch system gael ei\n"
"osod a defnyddio'r rhaglen sydd yno i ffurfweddu eich cyswllt."
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
-"Os ydych wedi dweud wrth y gosodwr eich bod am ddewis pecynnau'n unigol\n"
-"bydd coeden yn cynnwys yr holl becynnau wedi eu dosbarthu yn ĂŽl grwp ac\n"
-"isgrwp. Wrth bori'r goeden, gallwch ddewis grwp cyfan, isgrwp neu becyn\n"
-"unigol.\n"
-"\n"
-"Pryd bynnag fyddwch wedi dewis pecyn ar y goeden, bydd disgrifiad yn\n"
-"ymddangos ar y dde. \n"
-"!! Os oes pecyn gwasanaethwr wedi ei ddewis yn fwriadol neu am ei fod yn "
-"rhan\n"
-"o grwp cyfan, bydd angen i chi gadarnhau eich bod eisiau i'r gwasanaethwyr\n"
-"gael eu gosod. Ym Mandrake Linux mae unrhyw wasanaethwr sydd wedi ei\n"
-"osod yn cael ei gychwyn fel rhagosodiad wrth gychwyn. Hyd yn oed os ydynt\n"
-"yn ddiogel a doedd dim materion pryder pan gafodd y dosbarthiad ei ryddhau,\n"
-"mae'n bosibl i fylchau diogelwch gael eu darganfod wedi i'r fersiwn hwn o\n"
-"Mandrake Linux gael ei gwblhau. Os nad ydych yn gwybod beth mae\n"
-"gwasanaeth arbennig i fod i'w wneud na pham mae wedi ei osod, yna cliciwch\n"
-"\"Na\". Bydd clicio \"Iawn\" yn gosod y gwasanaethau hynny a byddant yn\n"
-"cael eu cychwyn yn ddiofyn drwy ragosodiad!!\n"
-"\n"
-"Mae'r dewis \"Dibyniaethau Awtomatig\"yn analluogi'r deialog rhybudd sy'n\n"
-"ymddangos bob tro fydd y gosodwr yn dewis pecyn yn awtomatig.\n"
-"Mae hyn yn digwydd am ei fod wedi penderfynu ei fod angen bodloni\n"
-"dibyniad gyda phecyn arall er mwyn cwblhau'r gosodiad yn llwyddiannus\n"
-"\n"
-"Mae'r eicon disg medal bychan ar waelod y rhestr yn caniatĂĄu llwytho'r\n"
-"rhestr pecynnau dewiswyd yn ystod gosodiad blaenorol. Bydd clicio\n"
-"ar yr eicon hwn yn gofyn i chi osod yn y peiriant disg meddal grëwyd ar\n"
-"ddiwedd gosodiad arall. Gwelwch yr ail neges o'r cam diwethaf ar sut i\n"
-"greu disg meddal o'r fath."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Mae'n amser penderfynu pa raglenni rydych am eu gosod ar eich\n"
-"system. Mae yna filoedd o becynnau ar gael ar gyfer Mandrake Linux, ond\n"
-"does dim disgwyl i chi wybod amdanyn nhw i gyd.\n"
-"\n"
-"Mae pecynnau wedi eu trefnu i grwpiau yn dibynnu ar ddefnydd penodol\n"
-"eich peiriant. Mae gan Mandrake Linux bedair gosodiad rhagosodedig. Mae\n"
-"modd meddwl amdanynt fel blychau ar gyfer pecynnau amrywiol, fel mae modd\n"
-"i \"Fan Gwaith\" fod a rhaglenni o \"Datblygu\" wedi eu gosod.\n"
-"\n"
-"Mae'r pecynnau wedi eu didoli yn grwpiau sy'n cyfateb i ddefnydd penodol\n"
-"ar eich peiriant. Mae'r grwpiau wedi eu rhannu yn bedair adran:\n"
-"\n"
-" * \"Man Gwaith\": os ydych yn bwriadu defnyddio eich peiriant fel man\n"
-"gwaith yna dewiswch un o'r grwpiau cyfatebol.\n"
-"\n"
-" * \"Datblygu\": os yw'r peiriant yn cael ei ddefnyddio i raglenni, "
-"dewiswch\n"
-" y grwpiau perthnasol\n"
-"\n"
-" * \"Gwasanaethwr\": os ydych am i'r peiriant gael ei ddefnyddio fel\n"
-"gwasanaethwr bydd modd i chi ddewis y gwasanaethau cyffredin rydych am\n"
-"eu cael ar eich peiriant.\n"
-"\n"
-" * \"Amgylchedd Graffigol\": dyma'r lle i ddewis eich amgylchedd graffigol.\n"
-"Rhaid dewis o leiaf un er mwyn cael man gwaith graffigol!\n"
-"\n"
-"Bydd symud cyrchwr y llygoden dros enw grwp yn amlygu esboniad byr am y\n"
-"grwp hwnnw. Os ydych wedi dad-ddewis pob grwp wrth wneud gosodiad\n"
-"arferol ac nid uwchraddiad), bydd dialog yn ymddangos a chynnig\n"
-"dewisiadau amrywiol ar gyfer y gosodiad lleiaf\n"
-"\n"
-" * \"Gyda X\" Gosod y nifer lleiaf o becynnau i gael penbwrdd graffigol\n"
-"i weithio.\n"
-"\n"
-" * \"Gyda dogfennaeth elfennol\" Gosod y system sylfaenol yn ogystal\n"
-"a gwasanaethau elfennol a'u dogfennau. Mae'r gosodiad hwn yn addas\n"
-"ar gyfer gosod gwasanaethwr.\n"
-"\n"
-" * \"Gosodiad bychan iawn\" Gosod y lleiafswm posibl i greu system Linux\n"
-"llinell orchymyn weithredol. Tua 65MB o faint.\n"
-"\n"
-"Mae clicio blwch \"Dewis pecynnau unigol\". yn ddefnyddiol os ydych\n"
-"yn gyfarwydd gyda'r pecynnau sy'n cael eu cynnig neu os ydych eisiau\n"
-"rheolaeth lwyr dros yr hyn sy'n cael ei osod\n"
-"\n"
-"Os ydych wedi cychwyn y gosodiad ym modd \"Diweddaru\", bydd modd i\n"
-" chi ddad-ddewis pob grwp er mwyn osgoi gosod unrhyw becyn newydd.\n"
-"Mae hyn yn ddefnyddiol ar gyfer trwsio neu ddiweddaru system sy'n bod "
-"eisoes.\n"
-"\n"
-" "
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
-msgstr ""
-"Mae gosodiad Mandrake Linux yn cynnwys nifer o CD-ROMau. Mae DrakX\n"
-"yn gwybod os yw pecyn penodol wedi ei leoli ar CD-ROM arall a bydd yn bwrw\n"
-"allan y CD cyfredol a gofyn am y llall."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Dyma'r rhaniadau Linux sydd wedi canfod ar eich disg caled.\n"
-"Gallwch gadw'r dewisiadau sydd wedi eu gwneud gan y dewin, mae'n nhw'n iawn\n"
-"ar gyfer y rhan fwyaf o osodiadau. Os ydych am wneud newidiadau, rhaid i chi "
-"ol eiaf\n"
-"ddiffinio rhaniad gwraidd (\"/\"). Peidiwch dewis rhaniad sy'n rhy fach neu "
-"fyddwch\n"
-"yn methu llwytho digon o feddalwedd. Os hoffech gadw eich data ar raniad "
-"arall,\n"
-"bydd angen i chi greu rhaniad ar gyfer \"/home\"( ond dim ond os oes mwy nag "
-"un\n"
-"rhaniad Linux ar gael)\n"
-"Mae pob rhaniad yn cael ei restri fel hyn: \"Enw\", \"Maint\".\n"
-"\n"
-"Mae \"Enw\" yn cael ei drefnu: \"math o ddisg caled\", rhif y disg caled\",\n"
-"\"rhif rhaniad\" (e.e, \"hda1\").\n"
-"\n"
-"\"Math o ddisg caled\" yw \"hdos mai disg caled IDE sydd gennych a\n"
-"\"sd\" os mai SCSI yw'r disg caled.\n"
-"\n"
-"Mae \"Rhif Disg Caled\" yn llythyren ar ĂŽl \"hd\" neu \"sd\". Ar gyfer\n"
-"disg caled IDE mae:\n"
-"\n"
-" * \"a\" yn golygu \"prif ddisg caled ar y rheolwr IDE cyntaf\",\n"
-"\n"
-" * \"b\" yn golygu \"disg caled gwas ar y rheolwr IDE cyntaf\",\n"
-"\n"
-" * \"c\" yn golygu \"prif ddisg caled ar yr ail reolwr IDE\",\n"
-"\n"
-" * \"d\" yn golygu \"disg caled gwas ar yr ail reolwr IDE\".\n"
-"\n"
-"Gyda disgiau caled SCSI, mae \"a\" yn golygu \"ID SCSI isaf \", a \"b\" yn "
-"golygu\n"
-"\"ID SCSI ail isaf\", ag ati."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
-msgstr ""
-"Mae GNU/Linux yn system aml-ddefnyddiwr, ac mae hyn yn golygu bod pob\n"
-"defyddiwr yn medru cael ei ddewisiadau ei hun, ei ffeiliau ei hun ac yn y "
-"blaen.\n"
-"Gallwch ddarllen yr \"Starter Guide\" i ddysgu mwy. Ond yn anhebyg i "
-"\"gwraidd\",\n"
-"sef y gweinyddwr, ni fydd modd i'r defnyddiwr fyddwch yn eu creu yma'n "
-"medru\n"
-"newid dim ond eu ffeiliau a'u ffurfweddiad ei hun. Bydd rhaid i chi greu un\n"
-"defnyddiwr cyffredin ar gyfer chi eich hun. Dyma'r cyfrif ddylech "
-"mewngofnodi\n"
-"iddo ar gyfer defnydd bob dydd. Er ei fod yn ymarferol iawn i fewngofnodi "
-"fel\n"
-"\"root\" gall fod yn beryglus iawn!. Gall y camgymeriad lleiaf olygu nad yw "
-"eic\n"
-"system yn gweithio ragor. Os wnewch chi gamgymeriad mawr fel defnyddiwr\n"
-"cyffredin, byddwch ond yn colli rhywfaint o wybodaeth, ac nid y system "
-"gyfan.\n"
-"\n"
-"Yn gyntaf rhowch eich enw go iawn. Dose dim rhaid, wrth gwrs - mae modd\n"
-"i chi rhoi beth bynnag hoffech chi. Bydd DraX yn cymryd yr enw cyntafa'i roi "
-"yn\n"
-"yr \"Enw defnyddiwr\" Dyma'r enw bydd y defnyddwr hwn yn ei ddefnyddio i\n"
-"fewngofnodi i'r system. Mae modd ei newid. Yna rhowch gyfrinair. Nid yw\n"
-"cyfrianair defnyddiwr cyffredin mor bwysig ag un \"gwraidd\" o safbwynt "
-"diogelwch\n"
-"ond nid yw hynny'n rheswm i'w esgeuluso - wedi'r cyfan mae eich ffeiliau "
-"mewn\n"
-"perygl\n"
-"\n"
-"Os wnewch chi glicio \"Derbyn defnyddiwr\", bydd modd ychwanegu fanint\n"
-"fynnoch. Ychwanegwch ddefnyddiwr ar gyfer pob un o'ch ffrindiau: eich tad\n"
-"neu eich chwaer, e.e. Ar ĂŽl ychwanegu'r holl ddefnyddwyr, cliciwch \"Nesaf ->"
-"\".\n"
-"\n"
-"Bydd clicio'r botwm \"Uwch\" yn caniatĂĄu i chi newid y \"cragen\" "
-"rhagosodedig\n"
-"ar gyfer y defnyddiwr hwnnw (bash yw'r rhagosodedig)."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
-msgstr ""
-"Cyn parhau dylech ddarllen amodau'r drwydded yn ofalus. Mae'n ymwneud\n"
-"Ăą holl ddosbarthiad Mandrake Linux. Os ydych yn cytuno Ăą'r holl amodau,\n"
-"cliciwch blwch \"Derbyn\". \n"
-"Os nad, ddiffoddwch eich cyfrifiadur."
-
-#: ../../install2.pm:1
-#, c-format
-msgid "You must also format %s"
-msgstr "Rhaid fformatio %s hefyd"
-
-#: ../../install2.pm:1
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Methu cael mynediad i fodiwlau'r cnewyllyn sy'n cyfateb i'ch cnewyllyn chi "
-"(mae ffeil %s ar goll), mae hyn yn golygu, fel arfer, nad yw eich disg "
-"cychwyn yn cydweddu gyda'r cyfrwng Gosod (crëwch ddisg cychwyn meddal newydd)"
-
-#: ../../install_any.pm:1
-#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Digwyddodd gwall - ni chanfyddwyd dyfeisiau dilys i greu systemau ffeil "
-"arnynt. Gwiriwch eich caledwedd am ffynhonnell yr anhawster."
-
-#: ../../install_any.pm:1 ../../partition_table.pm:1
-#, c-format
-msgid "Error reading file %s"
-msgstr "Gwall wrth ddarllen ffeil %s"
-
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"I ddefnyddio'r dewis o becynnau wedi eu cadw, cychwynnwch y gosodiad gyda "
-"``linux defcfg=floppy''"
+msgid "Wizard Configuration"
+msgstr "Ffurfweddiad y Dewin"
-#: ../../install_any.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "Nid yw 'r disg meddal hwn wedi ei fformatio i FAT"
+msgid "Autoprobe"
+msgstr "Atoholi"
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Rhowch ddisg meddal wedi ei fformatio i FAT yng ngyrrwr %s"
+msgid "Backup system files..."
+msgstr "Ffeiliau system wrth gefn"
#: ../../install_any.pm:1
#, c-format
msgid "Can't use broadcast with no NIS domain"
msgstr "Methu defnyddio darlledu heb barth NIS"
-#: ../../install_any.pm:1
-#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-"Bydd y pecynnau canlynol yn cael eu tynnu ganiatĂĄu diweddaru eich system: %"
-"s\n"
-"\n"
-"\n"
-"Ydych chi am dynnu'r pecynnau hyn?\n"
-
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No"
-msgstr "Na"
+msgid "Removing printer \"%s\"..."
+msgstr "Tynnu argraffydd \"%s\"..."
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Yes"
-msgstr "Iawn"
+msgid "drakfloppy"
+msgstr "drakfloppy"
-#: ../../install_any.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
+"Please indicate where the auto_install.cfg file is located.\n"
"\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
-"Do you really want to install these servers?\n"
msgstr ""
-"Rydych wedi dewis y gwasanaethwr(wyr) canlynol: %s\n"
-"\n"
+"Dangoswch lle mae'r ffeil auto_install.cfg wedi ei leoli,\n"
"\n"
-"Mae'r gwasanaethwyr canlynol yn cael eu cychwyn drwy ragosodiad. Does\n"
-"ganddynt unrhyw faterion diogelwch hysbys, ond mae'n bosibl i rai ddod i'r\n"
-"golwg. Os felly rhaid uwchraddio gynted ag y bo modd\n"
+"Gadael yn wag os ydych am greu modd gosod yn awtomatig.\n"
"\n"
-"Ydych chi wir eisiau gosod y gwasanaethwyr hyn?\n"
-
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System configuration"
-msgstr "Ffurfweddu'r system"
-
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System installation"
-msgstr "Gosod y system"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Bringing down the network"
-msgstr "Cau'r rhwydwaith"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "information level that can be obtained through the cpuid instruction"
+msgstr "Lefel gwybodaeth i'w gael drwy gyfarwyddid cpuid"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Bringing up the network"
-msgstr "Cychwyn y rhwydwaith"
+msgid "Peru"
+msgstr "Periw"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Methodd rhannu: %s"
+msgid " on device: %s"
+msgstr "ar ddyfais: %s"
#: ../../install_interactive.pm:1
#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Daeth dewin Rhannu DrakX o hyd i'r atebion canlynol:"
+msgid "Remove Windows(TM)"
+msgstr "Tynnu Windows(TM)"
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "I can't find any room for installing"
-msgstr "Methu canfod lle ar gyfer gosod"
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr ""
+"Yn cychwyn Gwasanaethwr Ffont X (mae hyn yn orfodol i XFree i redeg).."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
msgstr ""
-"Medrwch rannu %s\n"
-"Wedi gorffen, peidiwch anghofio cadw gyda 'w'"
+"Tynnwyd y rhanfwyaf o'r gwerthoedd\n"
+"hyn o'ch system ar waith.\n"
+"Medrwch eu newid yn ĂŽl y galw."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Use fdisk"
-msgstr "Defnyddiwch fdisk"
+msgid "Select the font file or directory and click on 'Add'"
+msgstr "Dewiswch ffeil neu gyfeiriadur y ffont a chlicio 'Ychwanegu'"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Custom disk partitioning"
-msgstr "Rhannu disg unigol"
+msgid "Madagascar"
+msgstr "Madagascar"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Bydd pob rhaniad a'u data yn cael ei ddileu ar yrrwr %s"
+msgid "Urpmi"
+msgstr "Urpmi"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Mae gennych fwy nag un disg caled, ar ba un ydych am osod linux?"
+msgid "Cron not available yet as non-root"
+msgstr "Nid yw cron ar gael et ar gyfer di-wraidd"
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Erase entire disk"
-msgstr "Dileu'r ddisg gyfan"
+msgid "System"
+msgstr "System"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Tynnu Windows(TM)"
+msgid "Do you want to use this feature?"
+msgstr "Ydych chi eisiau defnyddio'r nodwedd?"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr "Nid oes rhaniadau FAT i newid eu maint (neu nad oes digon o le ar ĂŽl)"
+msgid "Arabic"
+msgstr "Arabeg"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"\n"
+"- Options:\n"
msgstr ""
-"I siugrhau cywirdeb data'r rhaniad ar ĂŽl ailfeintiol'r rhaniad(au),bydd \n"
-"gwiriadau'r system ffeiliau'n cael eu gwneud wrth i chi ail gychwyn Windows "
-"(TM)"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Methodd newid maint FAT: %s"
+"\n"
+"-Dewisiadau:\n"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Resizing Windows partition"
-msgstr "Mesur ffiniau system ffeilio Windows"
+msgid "Password required"
+msgstr "Mae angen cyfrinair"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Resizing"
-msgstr "Newid maint"
+msgid "%d minutes"
+msgstr "%d munud"
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "partition %s"
-msgstr "rhaniad %s"
+msgid "Graphics card: %s"
+msgstr "Cerdyn graffeg: %s"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Pa faint o le ydych am ei gadw ar gyfer Windows ar"
+msgid "WebDAV transfer failed!"
+msgstr "Method trosglwyddiad WebDaAV!"
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"RHYBUDD!\n"
-"\n"
-"Bydd DrakX yn newid maint eich rhaniad Windows. Byddwch\n"
-"ofalus: mae gwneud hyn yn beryglus. Os nad ydych wedi\n"
-"gwneud yn barod, dylech fynd allan o'r gosod, rhedeg\n"
-"scandisk yn Windows (ac os oes modd defrag), yna ail\n"
-"gychwyn y gosodiad. Dylech hefyd wneud copi wrth gefn\n"
-"o'ch data.Pan rydych yn siwr, cliciwch Iawn."
+msgid "XFree configuration"
+msgstr "Ffurfweddiad XFree"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
-msgstr ""
-"Mae eich rhaniad Windows yn rhy ysgyriog, rhedwch \"defrag\" yn gyntaf o dan "
-"Windows ac yna ailgychwyn gosodi Mandrake Linux."
+msgid "Choose action"
+msgstr "Dewiswch weithred"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Cyfrifo maint rhaniad Windows"
+msgid "French Polynesia"
+msgstr "French Polynesia"
-#: ../../install_interactive.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
msgstr ""
-"Nid yw'r newidiwr maint FAT yn medru trin eich rhaniad.\n"
-"digwyddodd y gwall canlynol: %s"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Pa raniad ydych chi am newid ei faint?"
+"Drwy ragosodiad mae DrakX yn cymryd bod gennych lygoden dau fotwm\n"
+"a bydd yn ei osod i efelychu botwm tri. Bydd DrakX yn gwybod yn awtomatig\n"
+"p'un a'i yw'n lygoden PS/2, cyfresol neu USB.\n"
+"\n"
+" Os hoffech chi bennu math arall o lygoden, dewiswch y math priodol o'r "
+"rhestr.\n"
+"\n"
+"Os byddwch yn dewis llygoden ar wahĂąn i'r rhagosodedig, byddwch yn gweld\n"
+"ffenestr profi'r llygoden. Defnyddiwch y botymau a'r olwyn i wneud yn siwr "
+"fod\n"
+"y gosodiadau'n gweithio. Os nad yw'r llygoden yn gweithio'n iawn pwyswch\n"
+"ar y bylchwr neu [Return] i \"Dileu\" a dewis eto.\n"
+"\n"
+"Weithiau ni fydd llygod olwyn yn cael eu canfod yn awtomatig. Bydd rhaid i "
+"chi\n"
+"eu dewis o'r rhestr. Gwnewch yn siwr eich bod yn dewis yr un sy'n cyfateb "
+"i'r porth\n"
+"mae wedi ei gysylltu iddo. Wedi i chi wasgu'r botwm \"Nesaf ->\" bydd "
+"delwedd\n"
+"llygoden yn cael ei ddangos. Bydd angen i chi symud olwyn y llygoden iddo \n"
+"weithio'n gywir. Wrth i chi wedl yr olwyn sgroli ar y sgrĂźn yn symud wrth i "
+"chi droi'r\n"
+"olwyn, profwch y botymau a gwirio fod cyfeirydd y llygoden yn symud ar y "
+"sgrin\n"
+"wrth i chi symud eich l;lygoden."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Defnyddiwch y lle gwag ar raniad Windows"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "Cynnal OKI 4w ac argraffyddion windows cyffelyb."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"Nid oes rhaniadau FAT i'w defnyddio fel cylch-ĂŽl (neu nad oes digon o le ar "
-"ĂŽl)"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr "Cychwynnwch system sain ALSA (PensaernĂŻaeth Sain Linux Uwch)"
-#: ../../install_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Maint rhaniad cyfnewid mewn MB: "
+msgid "Installing driver for %s card %s"
+msgstr "Gosod gyrrwr %s ar gyfer cerdyn %s "
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Root partition size in MB: "
-msgstr "Maint rhaniad gwraidd mewn MB :"
+msgid ""
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
+msgstr ""
+"Rydych wedi trosglwyddo eich argraffydd rhagosodedig blaenorol rhagosodedig "
+"(\"%s\"). A ddylai fod yn argraffydd rhagosodedig y system argraffu newydd %"
+"s ?"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Choose the sizes"
-msgstr "Dewiswch y maint"
+msgid "Enable Server"
+msgstr "Galluogi'r Gwasanaethwr"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Pa raniad hoffech chi ei ddefnyddio ar gyfer Linux4Win?"
+msgid "Ukrainian"
+msgstr "Wcranaidd"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Defnyddiwch raniad Windows ar gyfer cylch-ĂŽl"
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
+msgstr ""
+"Nid oedd mynediad i'r rhwydwaith yn rhedeg ac nid oedd modd ei gychwyn. "
+"Gwiriwch eich ffurfweddiad a'ch caledwedd. Yna ceisiwch ail ffurfweddi eich "
+"argraffydd."
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "There is no existing partition to use"
-msgstr "Nid oes rhaniad cyfredol i'w ddefnyddio"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "Mewnosodwch y disg meddal Cychwyn ddefnyddiwyd yn gyrrwr %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use existing partitions"
-msgstr "Defnyddiwch y rhaniadau cyfredol"
+msgid "Local network(s)"
+msgstr "Rhwydwaith(iau) lleol "
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nid oes digon o le i ddynodi rhaniadau newydd"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
+msgstr "Tynnu Windows(TM)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Use free space"
-msgstr "Defnyddiwch le gwag"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr ""
+"Mae eich %s wedi ei ffurfweddu.\n"
+"Medrwch ddefnyddio \"XSane\" i sganio dogfennau o'r ddewislen rhaglenni Aml-"
+"gyfrwng/Graffigau."
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Rhaid bod gennych raniad FAT wedi ei osod yn /boot/efi"
+msgid "Firewire controllers"
+msgstr "Rheolyddion firewire"
-#: ../../install_interactive.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"You don't have a swap partition.\n"
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
"\n"
-"Continue anyway?"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
msgstr ""
-"Nid oes gennych raniad cyfnewid\n"
+"Ar ĂŽl ffurfweddu paramedrau cyffredinol y cychwynnwr, bydd y rhestr o\n"
+"ddewisiadau cychwyn ar gael wrth gyvchwyn yn cael eu harddangos.\n"
"\n"
-"Parhau beth bynnag?"
+"Os oes yna systemau gweithredu eraill ar eich cyfrifiadur byddant yn cael\n"
+"eu hychwanegu i'r ddewislen cychwyn. Mae modd addasu'r dewisiadau\n"
+"eraill dwy glicio \"Ychwanegu\" i greu cofnod newydd; dewis cofnod\n"
+"a chlicio \"Newid\" neu \"Tynnu\" i'w nweid neu ei dynnu. Mae \"Iawn\"\n"
+"yn gwirio'r newidiadau\n"
+"\n"
+"Efallai na fyddwch eisiau rhoi mynediad i'r systemau gweithredu hyn i neb\n"
+"arall fydd yn mynd i'r consol ac yn ailgychwyn y cyfrifiadur. Gallwch "
+"ddileu'r\n"
+"cofnodion perthnasol o'r system weithredu i'w tynnu o ddewislwn y\n"
+"cychwynnwr,ond bydd rhaid i chi greu disg cychwyn ar gyfer y systemau\n"
+"gweithredu eraill rheini!"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Rhaid bod gennych raniad gwraidd.\n"
-"Crëwch raniad (neu glicio ar un presennol)\n"
-"Yna dewiswch weithred \"Pwynt Gosod\" a'i osod i `/'"
+msgid "System mode"
+msgstr "Modd system"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
msgstr ""
-"Mae peth caledwedd ar eich cyfrifiadur angen gyrwyr \"priodol\" i weithio.\n"
-"Mae rhywfaint o wybodaeth i'w gael amdanynt yn %s"
+"I argraffu ar argraffydd NetWare, rhaid i chi rhoi enw gwasanaethwr argraffu "
+"NetWare (Sylwer! gall fod yn wahanol i'w enw gwesteiwr TCP/IP) yn ogystal "
+"Ăą'r rhes waith argraffu am yr argraffydd rydych am gael mynediad iddo ac "
+"unrhyw enw defnyddiwr a chyfrinair perthnasol."
-#: ../../install_messages.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Llongyfarchiadau, mae'r gosodiad wedi ei gwblhau.\n"
-"Tynnwch y cyfrwng cychwyn a gwasgu Return i ail gychwyn.\n"
-"\n"
-"\n"
-"Am wybodaeth am gywiriadau sydd ar gael ar gyfer y rhyddhad hwn o Mandrake\n"
-"Linux, cysylltwch a'r atodiad, sydd i'w gael yn:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Mae gwybodaeth ar ffurfweddu eich system ar gael ym mhenawdau ĂŽl osod\n"
-"yr Official Mandrake Linux User's Guide."
+msgid "Netmask:"
+msgstr "Netmask:"
-#: ../../install_messages.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr "http://www.mandrakelinux.com/en/91errata.php3"
+msgid "Append"
+msgstr "Atodi"
-#: ../../install_messages.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr ""
+"Adnewyddu rhestr argraffyddion (dangos pob argraffydd CUPS pell sydd ar gael)"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
msgstr ""
+"Pan mae'r dewis yma ar gael, gwneud yn siwr wrth gychwyn CUPS fod\n"
"\n"
-" Rhybudd\n"
-"\n"
-"Darllenwch yr amodau isod yn ofalus. Os ydych yn anghytuno gydag unrhyw\n"
-" ddarn, nid oes caniatĂąd i chi osod y cyfrwng CD nesaf. Pwyswch 'Gwrthod' i\n"
-" barhau'r gosodiad heb ddefnyddio'r cyfryngau hyn.\n"
+"- os yw LPD/LPRng wedi ei osod, na fydd CUPS yn ysgrifennu dros /etc/"
+"printcap\n"
"\n"
-"Nid yw rhai cydrannau ar y CDau canlynol yn cael eu rheoli gan Drwydded GPL\n"
-" neu gytundebau tebyg. Mae'r cydrannau hynny'n cael eu rheoli gan dermau ac\n"
-" amodau ei drwydded benodol ei hun. Darllenwch yn ofalus a chadwch at y\n"
-" trwyddedau penodol cyn defnyddio neu ddosbarthu'r cydrannau hynny.\n"
+"- os yw /etc/cups/cupsd.conf ar goll, bydd yn cael ei greu\n"
"\n"
-"Mae'r trwyddedau hynny'n atal yn gyffredinol, drosglwyddiad, dyblygu (ar "
-"wahĂąn i\n"
-" bwrpas cadw wrth gefn), dosbarthu, cildroi peirianyddol, dadcydosod,\n"
-" dadgrynhoi neu newid y cydrannau. Bydd unrhyw dorri ar yr amodau hyn yn\n"
-"terfynu eich hawl o dan y drwydded benodol. Oni bai ei fod yn rhoi'r hawl i "
-"chi,\n"
-"nid oes modd i chi osod y rhaglenni ar fwy nag un system na'i addasu ar "
-"gyfer\n"
-" defnydd ar rwydwaith. Os oes amheuaeth, cysylltwch yn uniongyrchol Ăą\n"
-"dosbarthwr neu olygydd y cydrannau hynny.\n"
-"Mae trosglwyddo i drydydd parti neu gopĂŻo'r cydrannau hynny gan gynnwys y\n"
-" ddogfennaeth, wedi ei wahardd fel rheol\n"
+"- pan mae gwybodaeth am argraffydd yn cael ei ledaenu, nid yw'n cynnwys "
+"\"localhost\" fel enw gwasanaethwr.\n"
"\n"
-"Mae pob hawl i gydrannau'r cyfrwng CD nesaf yn perthyn i' hawduron "
-"perthnasol\n"
-" ac maent wedi eu hamddiffyn drwy gyfreithiau eiddo deallusol a hawlfraint "
-"sy'n\n"
-" berthynol i raglenni meddalwedd.\n"
+"Os yw rhai o'r rhain yn achosi anhawster, diffoddwch y dewis hwn, ond bydd "
+"rhaid i chi ofalu amdanynt."
-#: ../../install_messages.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
-"5. Governing Laws \n"
+"It also provides a much higher API than OSS.\n"
"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
msgstr ""
-"Cyflwyniad\n"
-"\n"
-"Bydd y system weithredu a'r cydrannau gwahanol sydd o fewn dosbarthiad "
-"Mandrake Linux yn\n"
-"cael eu galw yn \"Gynnyrch Meddalwedd\" o hyn ymlaen. Mae'r Cynnyrch "
-"Meddalwedd yn\n"
-"cynnwys, ond heb eu cyfyngu, i'r casgliad o raglenni , dulliau, rheolau a "
-"dogfennau mewn\n"
-"perthynas Ăą'r system weithredu a chydrannau gwahanol dosbarthiad Mandrake "
-"Linux.\n"
-"\n"
-"\n"
-"1. Cytundeb Trwyddedu\n"
-"\n"
-"Darllenwch y ddogfen hon yn ofalus. Mae'r ddogfen hon yn gytundeb trwyddedu "
-"rhyngoch\n"
-"chi Ăą MandrakeSoft S.A,. sy'n berthnasol i'r Cynnyrch Meddalwedd.\n"
-"\n"
-"Wrth osod, dyblygu neu ddefnyddio'r Cynnyrch Meddalwedd mewn unrhyw fodd, "
-"rydych yn\n"
-"amlwg yn derbyn ac yn llawn cytuno i gadw at delerau ac amodau'r Drwydded "
-"hon.\n"
-"Os ydych yn anghytuno ag unrhyw rhan o'r cytundeb, ni chewch ganiatĂąd i "
-"osod, dyblygu\n"
-"neu ddefnyddio'r Cynnyrch Meddalwedd.\n"
-"Bydd unrhyw ymgais i osod, dyblygu neu ddefnyddio'r Cynnyrch Meddalwedd mewn "
-"modd\n"
-"nad yw'n cyd-fynd Ăą thelerau ac amodau'r Drwydded yn ddi-rym a bydd yn "
-"terfynu eich\n"
-"hawliau o dan y Drwydded hon. Ar ddiwedd y Drwydded, rhaid i chi "
-"ddinistrio'n syth pob\n"
-"copi o'r Cynnyrch Meddalwedd.\n"
-"\n"
-"\n"
-"2. Gwarant Gyfyngedig\n"
-"\n"
-"Mae'r Cynnyrch Meddalwedd a'r ddogfennaeth gysylltiedig yn cael eu darparu "
-"\"fel ag y maent\",\n"
-"heb ddim gwarant, hyd y mae'r gyfraith yn caniatĂĄu.\n"
-"Ni fydd MandrakeSoft S.A. yn gyfrifol, o dan unrhyw amgylchiad, a chyhyd ag "
-"y bydd y gyfraith yn\n"
-"caniatĂĄu, am unrhyw iawn o gwbl, arbennig, damweiniol, uniongyrchol neu "
-"anuniongyrchol (gan\n"
-"gynnwys heb gyfyngu ar iawndal am golli busnes, tarfu ar fusnes, colled "
-"ariannol, costau cyfreithiol,\n"
-"a chosb o ganlyniad i achos llys, neu unrhyw golled o ganlyniad) yn codi o'r "
-"defnydd neu'r anallu i\n"
-"ddefnyddio'r Cynnyrch Meddalwedd, hyd yn oed os yw MandrakeSoft wedi eu "
-"cynghori o'r posibilrwydd\n"
-"o'r fath iawn.\n"
-"\n"
-"CYFRIFOLDEB CYFYNGEDIG YN GYSYLLTIEDIG GYDA'R MEDDIANT NEU'R DEFNYDD O "
-"FEDDALWEDD\n"
-" GWAHARDDEDIG MEWN RHAI GWLEDYDD\n"
-"\n"
-"Ni fydd MandrakeSoft S.A. yn gyfrifol, o dan unrhyw amgylchiad, a chyhyd y "
-"bydd y gyfraith yn caniatĂĄu,\n"
-"i fod yn atebol am unrhyw iawn o gwbl, arbennig, damweiniol, uniongyrchol "
-"neu anuniongyrchol (gan gynnwys\n"
-"heb gyfyngu ar iawndal am golli busnes, tarfu ar fusnes, colled ariannol, "
-"costau cyfreithiol, a chosb o ganlyniad\n"
-"i achos llys, neu unrhyw golled o ganlyniad) yn codi o lwytho i lawr "
-"cydrannau meddalwedd o un o safleoedd\n"
-" Mandrake Linux, sydd wedi eu gwahardd neu eu hatal mewn rhai gwledydd gan "
-"gyfreithiau lleol. Mae'r\n"
-"cyfrifoldeb cyfyngedig hwn yn perthyn i , ond heb ei gyfyngu i'r, cydrannau "
-"cryptograffiaeth cryf sy'n cael\n"
-"eu cynnwys o fewn y Cynnyrch Meddalwedd.\n"
-"3. Trwydded GPL a Thrwyddedau Cysylltiedig\n"
-"\n"
-"Mae'r Cynnyrch Meddalwedd yn cynnwys cydrannau sydd wedi eu creu gan "
-"bersonau a endidau gwahanol.\n"
-"Mae'r rhan fwyaf o'r cydrannau hyn yn cael eu llywodraethu gan dermau ac "
-"amodau Trwydded Gyhoeddus\n"
-"Cyffredinol (General Public Licence (GPL)), GNU, fydd yn cael ei gyfeirio "
-"ato o hyn ymlaen fel \"GPL\", neu\n"
-"drwyddedau cyffelyb.. Mae'r rhan fwyaf o'r trwyddedau'n caniatĂĄu i chi "
-"ddefnyddio, dyblygu, addasu neu\n"
-" ailddosbarthu'r cydrannau maent yn eu cynnwys. Darllenwch delerau ac amodau "
-"trwydded pob cydran cyn\n"
-"eu defnyddio. Dylai pob cwestiwn am drwydded cydran gael ei ofyn i awdur y "
-"gydran ac nid i MandrakeSoft.\n"
-"Mae'r rhaglenni ddatblygwyd gan MandrakeSoft yn cael eu llywodraethu o dan "
-"Drwydded GLP. Mae'r dogfennau\n"
-" ysgrifennwyd gan MandrakeSoft S.A. yn cael eu llywodraethu gan drwydded "
-"benodol. Darllenwch y dogfennau\n"
-"am fwy o fanylion.\n"
+"OSS (Open Sound System) oedd yr API sain cyntaf. Mae'n API sail annibynnol o "
+"systemau gweithredu ( mae ar gael ar gyfer y rhan fwyaf o systemau unices) "
+"on mae'n API elfennol iawn a chyfyng.\n"
+"Mae gyrwyr OSS hefyd yn ail ddyfeisio'r hyn sy'n bod eisoes.\n"
"\n"
-"4. Hawliau Eiddo Deallusol\n"
+"Mae ALSA (Advanced Linux Sound Architecture) yn bensaerniaeth fodiwlaidd "
+"sy'n \n"
+"cynnal ystod eang o gardiau ISA, USB a PCI.\n"
"\n"
-"Mae pob hawl cydrannau'r Cynnyrch Meddalwedd yn perthyn i'w hawduron "
-"perthnasol ac wedi eu hamddiffyn\n"
-"gan gyfreithiau eiddo deallusol a hawlfraint sy'n berthnasol i raglenni "
-"meddalwedd. Mae MandrakeSoft yn cadw\n"
-"ei hawl i newid neu addasu ei Gynnyrch Meddalwedd, yn rhannol neu yn gyfan, "
-"drwy unrhyw ddull ac ar gyfer\n"
-"unrhyw bwrpas. Mae \"Mandrake\", \"Mandrake Linux\" a'r logos cysylltiedig "
-"yn nodau masnachol sy'n\n"
-"perthyn i MandrakeSoft S.A.\n"
+"Mae hefyd yn darparu API llawer uwch na OSS.\n"
"\n"
-"5. Cyfreithiau Llywodraethol\n"
-"Os bydd unrhyw rhan o'r cytundeb hwn yn cael ei ddal yn ddi-rym, "
-"anghyfreithlon neu amherthnasol gan\n"
-"benderfyniad llys, bydd y rhan yma'n cael ei dynnu o'r cytundeb hwn. Byddwch "
-"yn parhau i fod yn rhwymedig\n"
-"i adrannau cymwys o'r cytundeb.\n"
-"Mae telerau ac amodau'r Drwydded hon yn cael eu llywodraethu gan Cyfreithiau "
-"Ffrainc. Mae'n ddymunol y\n"
-"bydd pob anghytundeb ar amodau'r drwydded yn cael eu datrys y tu allan i'r "
-"llys. Fel cam olaf, bydd yranghytundeb yn cael ei drosglwyddo i'r Llysoedd "
-"Barn, Paris - Ffrainc. Am unrhyw gwestiwn ynghylch yddogfen hon cysylltwch Ăą "
-"MandrakeSoft S.A. \n"
-
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Cychwyn cam '%s\"\n"
-
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Help"
-msgstr "Cymorth"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "not configured"
-msgstr "heb ffurfweddu"
-
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
-#, c-format
-msgid "Configure"
-msgstr "Ffurfweddu"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Go on anyway?"
-msgstr "Mynd yn ein blaen beth bynnag?"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "Digwyddodd gwall wrth osod pecyn"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Roedd gwall wrth drefnu pecynnau"
+"I ddefnyddio alsa, mae modd defnyddio un ai:\n"
+"- hen api OSS cydweddus\n"
+"-api ALSA newydd sy'n darparu llawer o nodweddion gell ond sydd angen "
+"defnyddio llyfrgell ALSA.\n"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Change your Cd-Rom!\n"
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
+"You may prefer to replay the installation.\n"
msgstr ""
-"Newidiwch eich CD-ROM\n"
+"Mae modd awtomeiddio'r awto gosod, os hoffech\n"
+"chi, yn yr achos hwnnw bydd yn cymryd drosod y\n"
+"disg caled!!\n"
+"(mae hyn ar gyfer gosod ar flwch arall).\n"
"\n"
-"Rhowch yr CD-ROM sydd wedi ei labeli \"%s\" yn eich gyrrwr a chlicio Iawn\n"
-"Os nad yw gennych, cliciwch Dileu i osgoi gosod o'r CD-ROM hwn."
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Refuse"
-msgstr "Gwrthod"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Accept"
-msgstr "Derbyn"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Installing package %s"
-msgstr "Gosod pecynnau %s"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "%d packages"
-msgstr "%d pecyn"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "No details"
-msgstr "Dim manylion"
+"Efallai byddai'n well gennych ai osod y gosodiad.\n"
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Details"
-msgstr "Manylion"
+msgid "Network printer \"%s\", port %s"
+msgstr "Argraffydd rhwydwaith \"%s\", porth %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Arhoswch, paratoi i osod"
+msgid ""
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
+msgstr ""
+"Dewiswch ba addasyddion rhwydwaith fydd yn cael eu cysylltu Ăą'ch Rhwydwaith "
+"Lleol."
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Time remaining "
-msgstr "Amser yn weddill"
+msgid "OK to restore the other files."
+msgstr "Iawn i adfer ffeiliau eraill"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Estimating"
-msgstr "Amcangyfrif"
+msgid "Please choose your keyboard layout."
+msgstr "Dewiswch gynllun eich bysellfwrdd"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Installing"
-msgstr "Gosod"
+msgid "Printer Device URI"
+msgstr "URI Dyfais Argraffu"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Dewiswch y pecynnau hoffech chi eu gosod"
+msgid "Not erasable media!"
+msgstr "Nid cyfrwng dileuadwy!"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Minimal install"
-msgstr "Gosodiad lleiaf"
+msgid "Terminal-based"
+msgstr "Seiliedig ar derfynnell"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Updating package selection"
-msgstr "Diweddaru'r dewis pecynnau"
+msgid "Installing a printing system in the %s security level"
+msgstr "Gosod system argraffu yn lefel diogelwch %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Load/Save on floppy"
-msgstr "LLwytho/Cadw ar ddisg meddal"
+msgid "The user name is too long"
+msgstr "Mae'r enw defnyddiwr yn rhy hir"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "<- Previous"
-msgstr "<- Cynt"
+msgid "Other OS (windows...)"
+msgstr "Systemau gweithredu Eraill (windows...)"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Install"
-msgstr "Gosodiad"
+msgid "WebDAV remote site already in sync!"
+msgstr "Mae safle pell WebDAV eisioes wedi cydamseru!"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Show automatically selected packages"
-msgstr "Dangoswch y pecynnau dewis awtomatig"
+msgid "Reading printer database..."
+msgstr "Darllen cronfa ddata argraffydd..."
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Does dim mod dad-ddewis y pecyn hwn. Rhaid ei ddiweddaru"
+msgid "Generate auto install floppy"
+msgstr "Creu disg meddal awto gosod"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
msgstr ""
-"Rhaid i'r pecyn gael ei uwchraddio\n"
-"Ydych chi'n siwr eich bod am ei ddad-ddewis?"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "Does dim mod dad-ddewis y pecyn, mae wedi ei osod yn barod"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Mae hwn yn becyn hanfodol, does dim modd ei ddad-ddewis"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't select/unselect this package"
-msgstr "Does dim modd i chi ddewis/dad-ddewis y pecyn"
+"\t\t enw defnyddiwr:%s\n"
+"\t\t ar lwybr: %s \n"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The following packages are going to be removed"
-msgstr "Bydd y pecynnau canlynol yn cael eu tynnu"
+msgid "Somalia"
+msgstr "Somalia"
-#: ../../install_steps_gtk.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "The following packages are going to be installed"
-msgstr "Mae'r pecynnau canlynol i'w gosod"
+msgid "No open source driver"
+msgstr "Dim gyrrwr cod agored"
-#: ../../install_steps_gtk.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Nid oes modd i chi ddewis y pecyn hwn - does dim lle ar ol i'w osod"
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
+msgstr ""
+"Wedi ei seilio ar y lefel flaenorol, ond mae'r system yn hollol gaeëdig ac "
+"mae nodweddion diogelwch ar eu huchaf."
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Importance: %s\n"
-msgstr "Pwysigrwydd: %s\n"
+msgid "Nicaragua"
+msgstr "Nicaragua"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Size: %d KB\n"
-msgstr "Maint: %d KB\n"
+msgid "New Caledonia"
+msgstr "New Caledonia"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Version: %s\n"
-msgstr "Fersiwn: %s\n"
+msgid "European protocol (EDSS1)"
+msgstr "Protocol Ewropeaidd (EDSSI)"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Name: %s\n"
-msgstr "Enw: %s\n"
+msgid "Video mode"
+msgstr "Modd fideo"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bad package"
-msgstr "Pecyn gwallus"
+msgid "Please enter your email address below "
+msgstr "Rhowch eich cyfeiriad e-bost islaw"
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other"
-msgstr "Arall"
+msgid "Oman"
+msgstr "Oman"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Cyfanswm maint: %d/%d MB"
+msgid "Network Monitoring"
+msgstr "Monitro'r Rhwydwaith"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Next ->"
-msgstr "Nesaf ->"
+msgid "SunOS"
+msgstr "SunOS"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Individual package selection"
-msgstr "Dewis pecynnau unigol."
+msgid "New size in MB: "
+msgstr "Maint mewn MB: "
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Package Group Selection"
-msgstr "Dewis y Grwp Pecyn"
+msgid "Partition table type: %s\n"
+msgstr "Tabl rhaniad math: %s\n"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Mae eich system yn brin o adnoddau. Efallai y cewch anhawsterau wrth osod\n"
-"Mandrake Linux. Os bydd hynny'n digwydd, gallwch geisio gwneud gosodiad\n"
-"testunol. I wneud hynny, gwasgwch F1 wrth gychwyn ar y CD-ROM ac yna rhoi "
-"'text'."
+msgid "Authentication Windows Domain"
+msgstr "Dilysu Parth Windows"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Save packages selection"
-msgstr "Cadw'r dewis becynnau"
+msgid "US keyboard"
+msgstr "Bysellfwrdd UDA"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Automated"
-msgstr "Awtomeiddwyd"
+msgid "Buttons emulation"
+msgstr "Efelychiad botymau"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Replay"
-msgstr "Ail chwarae"
+msgid ", network printer \"%s\", port %s"
+msgstr ", rhwydwaith argraffu \"%s\", porth %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
"\n"
-"You may prefer to replay the installation.\n"
+"Drakbackup activities via tape:\n"
+"\n"
msgstr ""
-"Mae modd awtomeiddio'r awto gosod, os hoffech\n"
-"chi, yn yr achos hwnnw bydd yn cymryd drosod y\n"
-"disg caled!!\n"
-"(mae hyn ar gyfer gosod ar flwch arall).\n"
"\n"
-"Efallai byddai'n well gennych ai osod y gosodiad.\n"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Generate auto install floppy"
-msgstr "Creu disg meddal awto gosod"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Reboot"
-msgstr "Ailgychwyn"
+"Gweithgaredd Drakbackup drwy dĂąp:\n"
+"\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Some steps are not completed.\n"
"\n"
-"Do you really want to quit now?"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
msgstr ""
-"Nid yw rhai camau wedi eu cwblhau.\n"
"\n"
-"Ydych chi wir eisiau gorffen?"
+" Anhawster cysylltiad FTP: Nid oedd yn bosibl anfon eich ffeiliau wrth gefn "
+"drwy FTP.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Creating auto install floppy..."
-msgstr "Creu disg meddal awto gosod"
+msgid "Sending Speed:"
+msgstr "Cyflymder Anfon:"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Rhowch ddisg meddal yng ngyrrwr %s"
+msgid "Halt bug"
+msgstr "Gwall halt"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Efallai bydd angen i chi newid eich dyfais cychwyn Open Firmware\n"
-" i alluogi'r cychwynnydd. Os nad ydych yn gweld anogwr y\n"
-" cychwynnydd wrth ail gychwyn, gwasgwch Command-Option-O-F wrth ail\n"
-" gychwyn a theipiwch: setenv boot-device %s,\\\\:tbxi\n"
-" Yna teipiwch: shut-down\n"
-"Wrth gychwyn eto dylech weld anogwr y cychwynnydd."
+msgid "Mail alert configuration"
+msgstr "Ffurfweddiad rhybudd e-bost"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Methodd gosod cychwynnydd. Digwyddodd y gwall canlynol:"
+msgid "Tokelau"
+msgstr "Tokelau"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Installing bootloader"
-msgstr "Gosod cychwynnydd"
+msgid "Bosnian"
+msgstr "Bosnieg"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Gwall gosod aboot, \n"
-"ceisiwch orfodi gosodiad hyd yn oed os yw hynny'n dinistrio'r rhaniad cyntaf?"
+msgid "Release: "
+msgstr "Ryddhad"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Do you want to use aboot?"
-msgstr "Ydych chi eisiau defnyddio aboot?"
+msgid "Connection speed"
+msgstr "Cyflymder y cysylltiad"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
msgstr ""
-"Mae'n ymddangos fod gennychbeiriant OldWorld\n"
-"neu Anhysbys ac ni fydd cychwynydd yaboot\n"
-"yn gweithio ar eich cyfer\n"
-"Bydd y gosodiad yn parhau ond bydd\n"
-"rhaid defnyddio BootX i gychwyn\n"
-"eich peiriant."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Preparing bootloader..."
-msgstr "Paratoi cychwynnydd"
+"Rhowch enw dyfais eich Ysgrifennwr CD\n"
+"ex: 0,1,0"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Domain Admin Password"
-msgstr "Cyfrinair Gweinyddol y Parth"
+msgid "Namibia"
+msgstr "Namibia"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Domain Admin User Name"
-msgstr "Enw Defnyddiwr Gweinyddiaeth Parth"
+msgid "Database Server"
+msgstr "Gwasanaethwr Cronfa Ddata"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Windows Domain"
-msgstr "Parth Windows"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr "nodweddion arbennig y gyrrwr (llosgi neu gynnal DVD)"
-#: ../../install_steps_interactive.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Authentication Windows Domain"
-msgstr "Dilysu Parth Windows"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "Methu ychwanegu rhaniad to_formatted_RAID md%d"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"I hyn weithio gyda 2WK PDC, bydd angen i chi gael y gweinyddwr i redeg C:"
-"\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add ac "
-"ailgychwyn y gwasanaethwr.Bydd angen hefyd yr enw defnyddiwr/cyfrinair "
-"Gweinyddiaeth Parth i uno'r peiriant Ăą'r parth Windows(NM).\n"
-"Os nad yw'r rhwydwaith wedi ei alluogi eto, bydd DrakX yn ceisio ymuno Ăą'r "
-"parth ar ol y cam o gychwyn y rhwydwaith.\n"
-"Os bydd y cam hwn yn methu am ryw reswm ac nid yw dilysiad yn gweithio, "
-"rhedwch 'smbpasswd -j DOMAIN -U USER%%PASSWORD' gan ddefnyddio eich Parth "
-"Windows(NM), a'ch Enw Defnyddiwr Gweinyddol/Cyfrinair ar ĂŽl cychwyn eich "
-"system.\n"
-"Bydd y gorchymyn 'wbinfo -t' yn gwirio a yw eich cyfrinachau dilysu'n addas."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Server"
-msgstr "Gwasanaethwr NIS"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Domain"
-msgstr "Parth NIS"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Authentication NIS"
-msgstr "Dilysu LDAP"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS"
-msgstr "NIS"
+"Mae eich cerdyn yn medru cael cefnogaeth cyflymu caledwedd 3D ond dim ond "
+"gyda XFree %s.\n"
+"SYLWER CEFNOGAETH ARBROFOL YW HWN AC FE ALL RHEWI EICH CYFRIFIADUR.\n"
+"Mae eich cerdyn yn cael ei gynnal gan XFree %s efallai bod gwell cefnogaeth "
+"mewn 2D."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "LDAP Server"
-msgstr "Gwasanaethwr LDAP"
+msgid "Please wait, setting security options..."
+msgstr "Arhoswch, gosod dewisiadau diogelwch..."
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "LDAP Base dn"
-msgstr "Sail dn LDAP"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr "Anhysbys|CPH05X (bt878) [nifer o werthwyr]"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Authentication LDAP"
-msgstr "Dilysu LDAP"
+msgid "Launch the graphical environment when your system starts"
+msgstr "Cychwyn yr amgylchedd graffigol wrth gychwyn eich system"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LDAP"
-msgstr "LDAP"
+msgid "hourly"
+msgstr "bob awr"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Local files"
-msgstr "Ffeiliau lleol"
+msgid " Successfuly Restored on %s "
+msgstr " Ei adfer yn Llwyddiannus ar %s "
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Authentication"
-msgstr "Dilysu"
+msgid "Making printer port available for CUPS..."
+msgstr "Gwneud porth argraffu ar gael ar gyfer CUPS..."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr "Mae'r cyfrinair yn rhy syml ( rhaid iddo fod o leiaf %d nod o hyd)"
+msgid "Antigua and Barbuda"
+msgstr "Antigua a Barbuda"
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "No password"
-msgstr "Dim cyfrinair"
+msgid ""
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
+msgstr ""
+"Mae !!! yn dangos bod y cyfrinair yng nghronfa ddata'r system yn\n"
+"wahanol i'r un yng ngronfa ddata'r Gwasanaethwr Terfynell.\n"
+"I fewngofnodi i'r Gwas.Terfynell dileu/ail ychwnaegu'r defnyddiwr."
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Set root password"
-msgstr "Gosod cyfrinair gwraidd"
+msgid "Spanish"
+msgstr "Spaenaidd"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr "Nid ydych wedi ffurfweddu X. Ydych chi'n siwr eich bod am wneud hyn?"
+msgid "Start"
+msgstr "Cychwyn"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Gwasanaethau: %d wedi eu cychwyn ar gyfer %d wedi eu cofrestri"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
+msgstr ""
+"Ymresymiadau: (arg)\n"
+"\n"
+"Galluogi/Analluogi gwiriad cymysgaredd cardiau ethernet."
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Services"
-msgstr "Gwasanaethau"
+msgid "Configuring applications..."
+msgstr "Ffurfweddi'u rhaglenni"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "System"
-msgstr "System"
+msgid "Normal modem connection"
+msgstr "Cysylltiad modem arferol"
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "%s on %s"
-msgstr "%s ar %s"
+msgid "File Selection"
+msgstr "Dewis ffeiliau"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Bootloader"
-msgstr "Cychwynydd ar waith"
+msgid ""
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+" tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+" standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
+msgstr ""
+"Pa ffurfweddiad IDSN sy'n well gennych?\n"
+"\n"
+"* Mae'r Hen ffurfweddiad yn defnyddio isdn4net. Mae'n\n"
+" cynnwys offer pwerus ond mae'n anodd ei ffurfweddi ac nid\n"
+"yw'n safonol. \n"
+"\n"
+" *Mae'r ffurfweddiad Newydd yn haws i'w ddeall, yn fwy safonol\n"
+" ond mae ganddo llai o offer.\n"
+"\n"
+"Rydym yn argymell y ffurfweddiad ysgafn.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
-msgid "Boot"
-msgstr "Cychwyn"
+msgid "CUPS"
+msgstr "CUPS"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "disabled"
-msgstr "anablwyd"
+msgid "Run config tool"
+msgstr "Rhedeg offeryn ffurfweddu"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "activated"
-msgstr "gweithredu"
+msgid "Bootloader installation"
+msgstr "Gosodiad Bootloader"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Firewall"
-msgstr "Mur Cadarn"
+msgid "Root partition size in MB: "
+msgstr "Maint rhaniad gwraidd mewn MB :"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Security"
-msgstr "Diogelwch"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "Mae hwn yn becyn hanfodol, does dim modd ei ddad-ddewis"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Security Level"
-msgstr "Lefel Diogelwch"
+msgid "Etherboot ISO image is %s"
+msgstr "%s yw'r delwedd ISO etherboot"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Network"
-msgstr "Rhwydwaith"
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"mae'r enwyd (BIND) yn Wasanaethwr Enw Parth (DNS) sy'n cael ei ddefnyddio i "
+"gydrannu enwau gwestai i'r cyfeiriadau IP."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Network & Internet"
-msgstr "Rhwydwaith a'r Rhyngrwyd"
+msgid "Disconnect..."
+msgstr "Dadgysylltu..."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Graphical interface"
-msgstr "Rhyngwyneb graffigol"
+msgid "Saint Lucia"
+msgstr "Saint Lucia"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Hardware"
-msgstr "Caledwedd"
+msgid "Report"
+msgstr "Adroddiad"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "TV card"
-msgstr "Cerdyn Teledu"
+msgid "Palau"
+msgstr "Palau"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "Heb ganfod cerdyn sain. Ceisiwch \"harddrake\" wedi'r gosodiad"
+msgid "level"
+msgstr "lefel"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr "Rhedwch \"sndconfig\" wedi'r gosodiad i ffurfweddu'ch cerdyn sain"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
+msgstr ""
+"Bydd pob digwyddiad yn cael ei archwilio gan arbenigwr technegol "
+"MandrakeSoft cymwysedig"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "A oes gennych gerdyn sain ISA?"
+msgid "Package Group Selection"
+msgstr "Dewis y Grwp Pecyn"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sound card"
-msgstr "Cerdyn sain"
+msgid "Restore Via Network Protocol: %s"
+msgstr "Adfer drwy Protocol Rhwydwaith: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Remote CUPS server"
-msgstr "Gwasanaethwr CUPS pell"
+msgid "You can configure each parameter of the module here."
+msgstr "Mae modd i chi ffurfweddu pob paramedr o'r modiwl yma"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "No printer"
-msgstr "Nid oes argraffydd"
+msgid "Choose the resolution and the color depth"
+msgstr "Dewiswch y cydraniad a'r dyfnder lliw"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Printer"
-msgstr "Argraffydd"
+msgid "Emulate third button?"
+msgstr "Efelychu'r trydydd botwm?"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mouse"
-msgstr "Llygoden"
+msgid ""
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
+msgstr ""
+"Nid oes modd i chi greu rhaniad newydd\n"
+"(gan eich bod wedi cyrraedd y nifer uchaf o raniadau cynradd).\n"
+"Diddymwch raniad cynradd a chreu rhaniad estynedig."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Timezone"
-msgstr "Cylchfa amser"
+msgid "Mount"
+msgstr "Gosod"
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Keyboard"
-msgstr "Bysellfwrdd"
+msgid "Creating auto install floppy"
+msgstr "Creu disg meddal awto gosod"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Summary"
-msgstr "Crynodeb"
+msgid "Install updates"
+msgstr "Diweddariadau"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "NTP Server"
-msgstr "Gweinydd NTP"
+msgid "text box height"
+msgstr "uchder blwch testun"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Cydweddi amser awtomatig (defnyddio NTP)"
+msgid "State"
+msgstr "Stad"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Cloc caledwedd wedi ei osod i GMT"
+msgid "Be sure a media is present for the device %s"
+msgstr "Gwnewch yn siwr fod y deunydd ar gael ar gyfer y ddyfais %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which is your timezone?"
-msgstr "Pa un yw eich parth amser?"
+msgid "Enable multiple profiles"
+msgstr "Galluogi aml-broffil"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Would you like to try again?"
-msgstr "Hoffech chi geisio eto?"
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
+msgstr ""
+"Mae'r dewisiadau hyn yn medru cadw wrth gefn ac adfer pob ffeil yn eich "
+"cyfeiriadur /etc.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Methu canfod drych: %s."
+msgid "Local printer"
+msgstr "Argraffydd lleol"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Cysylltu Ăą'r drych i estyn y rhestr o becynnau sydd ar gael"
+msgid "Files Restored..."
+msgstr "Adferwyd ffeiliau..."
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Dewiswch ddrych lle mae modd estyn y pecynnau"
+msgid "Package selection"
+msgstr "Dewis pecynnau"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr ""
-"Cysylltu Ăą safle Mandrake Linux i estyn rhestr o'r drychau sydd ar gael"
+msgid "Mauritania"
+msgstr "Mauritania"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
"\n"
-"Do you want to install the updates ?"
msgstr ""
-"Mae'n bosibl i chi llwytho i lawr y pecynnau diweddaraf sydd wedi eu\n"
-"ryddhau ers i'r dosbarthiad fod ar gael.Efallai bod bod gwallau amaterion "
-"diogelwch wedi eu cywiro\n"
+"Medraf gadw eich ffurfweddiad cyfredol a chymryd eich bod eisoes wedi gosod "
+"gwasanaethwr DHCP. Os felly, dilyswch fy mod wedi darllen y rhwydwaith "
+"dosbarth C rydych yn ei ddefnyddio fel eich rhwydwaith lleol, yn gywir. Ni "
+"fyddaf yn ei newid na chyffwrdd Ăą ffurfweddiad eich gwasanaethwr DHCP.\n"
"\n"
-"I lwytho'r pecynnau i lawr, bydd angen cyswllt gweithredol\n"
-"Ăą'r Rhyngrwyd.\n"
+"Y cofnod DNS rhagosodedig yw'r enw gwasanaethwr storio sydd wedi ei "
+"ffurfweddu yn y mur cadarn. Mae modd i chi ei newid am eich IP DNS ISP, e."
+"e. \n"
"\n"
-"Ydych chi am osod y diweddariadau?"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Rhowch y disg meddal Diweddaru Modiwlau yng ngyrrwr %s"
+"Neu, medraf ail ffurfweddu eich rhag wyneb ac (ail)ffurfweddi gwasanaethwr "
+"DHCP ar eich cyfer.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Mewnosodwch y disg meddal Cychwyn ddefnyddiwyd yn gyrrwr %s"
+msgid ""
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
+msgstr ""
+"Heb ganfod argraffydd lleol! I osod argraffydd gyda llaw, rhowch enw'r "
+"ddyfais /enw ffeil ar y llinell mewnbwn (Porth Paralel: /dev/lp0, /"
+"dev/,...., cyfatebol i LPT1:, LPT2,..., argraffydd USB 1af: /dev/usb/lp0, "
+"ail argraffydd USB: /dev/usb/lp1,...)."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Post-install configuration"
-msgstr "Ffurfweddiad ĂŽl osod"
+msgid "All primary partitions are used"
+msgstr "Mae pob rhaniad cynradd wedi ei ddefnyddio"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Installing package %s\n"
-"%d%%"
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
msgstr ""
-"Gosod pecyn %s\n"
-"%d%%"
+"Wedi i hyn gael ei wneud rydym yn argymell eich bod yn a'i gychwyn "
+"amgylchedd X i osgoi unrhyw anawsterau'n perthyn i enwau gwesteiwr.\n"
+"."
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Preparing installation"
-msgstr "Paratoi'r gosodiad"
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr "Canfod a ffurfweddu awtomatic caledwedd wrth gychwyn y cyfrifiadur."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom wedi ei labelu \"%s\""
+msgid "Installation Server Configuration"
+msgstr "Ffurfweddiad Gwasanaethwr Gosod"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Os yw'r holl CDau sydd yn y rhestr gennych, cliciwch Iawn.\n"
-"Os nad oes gennych un ohonynt, Cliciwch Diddymu.\n"
-"Os mae dim ond rhai CDau sydd ar goll, yna cliciwch Iawn."
+msgid "Configuring IDE"
+msgstr "Ffurfweddu IDE"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "All"
-msgstr "Popeth"
+msgid "Network functionality not configured"
+msgstr "Nid yw swyddogaethau'r rhwydwaith wedi ei ffurfweddu"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Gosodiad bychan iawn (yn arbennig dim urpmi)"
+msgid "Configure module"
+msgstr "Modd ffurfweddu"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Gyda dogfennaethelfennol (argymhellir!)"
+msgid "Cocos (Keeling) Islands"
+msgstr "Cocos (Keeling) Islands"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "With X"
-msgstr "Gyda X"
+msgid "Disconnecting from the Internet "
+msgstr "Datgysylltu o'r Rhyngrwyd"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Nid ydych wedi dewis unrhyw grwpiau o becynnau.\n"
-"Dewiswch y gosodiad lleiaf rydych ei eisiau"
+msgid "You'll need to reboot before the modification can take place"
+msgstr "Mi fydd angen i chi aillgychwyn cyn i'r newidiadau ddod i rym"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Type of install"
-msgstr "Math o osodiad"
+msgid "Provider phone number"
+msgstr "Rhif ffĂŽn y darparwr"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Selected size is larger than available space"
-msgstr "Mae'r maint ddewiswyd yn fwy na'r lle ar gael"
+msgid "Host %s"
+msgstr "Gwesteiwr %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "Rhowch ddisg meddal yn cynnwys dewis pecynnau yn y peiriant"
+msgid "Armenia"
+msgstr "Armenia"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Loading from floppy"
-msgstr "Llwytho o ddisg meddal"
+msgid "Fiji"
+msgstr "Ffiji"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Package selection"
-msgstr "Dewis pecynnau"
+msgid ""
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
+msgstr ""
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Gosod lleiafswm hyd cyfrinair a lleiafswm digidau a lleiafswm llythrennau "
+"mawr."
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Save on floppy"
-msgstr "Cadw ar ddisg meddal"
+msgid "Second floppy drive"
+msgstr "Ail ddisg meddal"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Load from floppy"
-msgstr "Llwytho o o ddisg meddal"
+msgid "About Harddrake"
+msgstr "Ynghylch Harddrake"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Dewiswch llwytho neu ddewis cadw pecyn ar ddisg meddal.\n"
-"Mae'r fformat yr un ar ddisgiau meddal wedi eu cynhyrchu drwy auto_install."
+msgid "Drive capacity"
+msgstr "Maint y gyrrwr"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
msgstr ""
-"Nid oes gan eich system ddigon o le ar ĂŽl ar gyfer gosodiad neu uwchraddiad "
-"(%d> %d)"
+"Rhowch ddisg meddal yn y gyrrwr\n"
+"Mi fydd yr holl wybodaeth ar y disg meddal yma yn cael ei golli"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Looking for available packages..."
-msgstr "Chwilio am y pecynnau sydd ar gael"
+msgid "Size: %s"
+msgstr "Maint: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Canfod pecynnau i'w uwchraddio"
+msgid "Control and Shift keys simultaneously"
+msgstr "Bysellau Control a Shift gyda'i gilydd"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Looking at packages already installed..."
-msgstr "Edrych arbecynnau wedieu gosod yn barod"
+msgid "secondary"
+msgstr "eilradd"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr ""
-"Chwilio am y pecynnau sydd ar gael ac yn ailadeiladu cronfa ddata rpm..."
+msgid "View Backup Configuration."
+msgstr "Edrych ar Ffurfweddiad Cadw wrth Gefn"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "Dim digon o le cyfnewid i gyflawni'r gosodiad, ychwanegwch rhagor"
+msgid "if set to yes, report check result to syslog."
+msgstr "os wedi ei osod i iawn, adrodd y gwirio i syslog."
-#: ../../install_steps_interactive.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
-msgstr ""
-"Wedi methu gwirio system ffeiliau %s. Hoffech chi drwsio'r gwallau? (gofal, "
-"mae modd colli data)"
+msgid "No password"
+msgstr "Dim cyfrinair"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Check bad blocks?"
-msgstr "Gwirio blociau gwallus?"
+msgid "Nigeria"
+msgstr "Nigeria"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Dewiswch y rhaniadau rydych am eu fformatio"
+msgid "There is no existing partition to use"
+msgstr "Nid oes rhaniad cyfredol i'w ddefnyddio"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
msgstr ""
-"Bydd angen i chi ail gychwyn cyn i'r newidiadau yn eich tabl rhaniad ddigwydd"
+"Mae argraffyddion canlynol\n"
+"\n"
+"%s\n"
+"ar gael ar eich system.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
msgstr ""
-"Nid oes lle rhydd ar gyfer yr ymlwythwr 1MB! Bydd y gosodiad yn parhau, ond "
-"i gychwyn y system bydd rhaid i chi greu rhaniad ymlwythwr yn DiskDrake"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Choose the mount points"
-msgstr "Dewiswch y pwyntiau gosod"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Sganio rhaniadau i ganfod pwyntiau gosod"
+"I argraffu i argraffydd TCP neu soced, rhaid i chi ddarparu enw gwesteiwr "
+"neu IP'r argraffydd ac yn ddewisol rhif y porth (Y rhagosodedig yw 9100). Ar "
+"wasanaethwyr HP JetDirect rhif y porth, fel rheol, yw 9100, gall amrywio ar "
+"wasanaethwyr eraill. Gweler llawlyfr eich caledwedd"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No partition available"
-msgstr "dim rhaniadau ar gael"
+msgid "Hard drive information"
+msgstr "Gwybodaeth am y ddisg caled"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configuring IDE"
-msgstr "Ffurfweddu IDE"
+msgid "Russian"
+msgstr "Rwsiaidd"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "IDE"
-msgstr "IDE"
+msgid "Jordan"
+msgstr "Yr Iorddonen"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "Ffurfweddu cardiau PCMCIA..."
+msgid "Hide files"
+msgstr "Cuddio ffeiliau"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid "Auto-detect printers connected to this machine"
+msgstr "Awto ganfod argraffyddion sy'n gysylltiedig a'r peiriant hwn"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Button 3 Emulation"
-msgstr "Efelychiad Botwm 3"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgstr ""
+"Nid yw XawTV wedi ei osod!\n"
+"\n"
+"\n"
+"Os oes gennych gerdyn teledu ond nid yw DrakX wedi ei ganfod (dim modiwl "
+"bttv ar saa7134\n"
+"yn \"/etc/modules\") na xawtv wedi ei osod, anfonwch canlyniad\n"
+"\"lspcidrake -v -f\" i \"install\\@mandrakesoft.com\"\n"
+"gyda phwnc \"undetected TV card\".\n"
+"\n"
+"\n"
+"Mae modd ei osod wrth deipio \"urpmi xawtv\" fel gwraidd mewn consol."
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Button 2 Emulation"
-msgstr "Efelychiad Botwm 2"
+msgid "Sorry, no floppy drive available"
+msgstr "Nid oes gyrrwr disg meddal ar gael"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Buttons emulation"
-msgstr "Efelychiad botymau"
+msgid "Bolivia"
+msgstr "Bolivia"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Dewiswch ba borth cyfresol mae eich llygoden wedi cysylltu iddi"
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
+"Gosod eich gwasanaethwr Windows i wneud yr argraffydd ar gael o dan brotocol "
+"IPP a gosod argraffu o'r peiriant hwn gyda'r \"%s\" yn Printerdrake.\n"
+"\n"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Mouse Port"
-msgstr "Porth Llygoden"
+msgid "Bad package"
+msgstr "Pecyn gwallus"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Please choose your type of mouse."
-msgstr "Dewiswch math eich llygoden"
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
+"Trowch eich peiriant i fod yn wasanaethwr pwerus gydag ychydig gliciau ar "
+"eich llygoden: gwasanaethwyr gwe, e-bost, mur gwarchod, llwybrydd, "
+"gwasanaethwr ffeil ac argraffu..."
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Encryption key for %s"
-msgstr "Allwedd amgryptio ar gyfer %s"
+msgid "DrakSec Basic Options"
+msgstr "Dewisiadau Sylfaenol DrakSec"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Upgrade %s"
-msgstr "Diweddaru %s"
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program. Just type \"sndconfig\" in a console."
+msgstr ""
+"\n"
+"\n"
+"\n"
+"Nodyn: os oes gennych gerdyn sain ISA PnP, bydd rhaid i chi ddefnyddio "
+"rhaglen sndconfig. Teipiwch \"sndconfig\" mewn consol."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Gosod neu ddiweddaru?"
+msgid "Romania"
+msgstr "Rwmania"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Install/Upgrade"
-msgstr "Gosod/Diweddaru"
+msgid "choose device"
+msgstr "dewis dyfais"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "Dyma restr lawn o'r bysellfyrddau ar gael"
+msgid "Canada"
+msgstr "Canada"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Dewiswch gynllun eich bysellfwrdd"
+msgid "Remove from LVM"
+msgstr "Tynnu o LVM"
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Quit"
-msgstr "Gadael"
+msgid "Timezone"
+msgstr "Cylchfa amser"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "License agreement"
-msgstr "Cytundeb trwyddedu"
+msgid "German"
+msgstr "Almaeneg"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "An error occurred"
-msgstr "Digwyddodd gwall"
+msgid "Next ->"
+msgstr "Nesaf ->"
-#: ../../install_steps_newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
msgstr ""
-" <Tab>/<Alt-Tab> rhwng elfennau | <Space> yn dewis | <F12> y sgrĂźnnesaf "
+"Drwy gychwyn hwn bydd yn caniatau argraffu testun plaenyn yr iaeth "
+"Siapanaeeg. Defnyddiwch hwn os ydych wir angen argraffu testun yn "
+"Siapanaeeg, oherwydd os ydych yn ei dderfnyddio ni fydd modd argraffu nodau "
+"acennog mewn ffontiau lladin ragor ac ni fydd modd newid ymyl tudalen na "
+"maint ffontiau, ag ati. Mae hyn yn effeithio ar argraffyddion sydd wedi eu "
+"diffinio ar y cyfrifiadur hwn. Os ydych am argraffu testun siapanaeeg ar "
+"argraffydd sy'n gysylltiedig Ăą chyfrifiadur pell, bydd angen cychwyn y "
+"nodwedd ar y cyfrifiadur hwnnw."
-#: ../../install_steps_newt.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Gosodiad %s Mandraks Linux"
+msgid ""
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
+msgstr ""
+"\n"
+"Mwy na thebyd rhaniad Gyrrwr\n"
+"yw'r rhaniad hwn. Gwell gadael\n"
+"llonnydd iddo.\n"
-#: ../../install_steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No floppy drive available"
-msgstr "Does dim gyrrwr disg meddal ar gael"
+msgid "Guinea-Bissau"
+msgstr "Guinea-Bissau"
-#: ../../install_steps.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Welcome to %s"
-msgstr "Croeso i %s"
+msgid "Horizontal refresh rate"
+msgstr "Graddfa adfywio llorweddol"
-#: ../../install_steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
msgstr ""
-"Methodd rhai pecynnau pwysig a chael eu gosod yn gywir.\n"
-"Un ai mae eich gyrrwr CD-ROM neu eich CD-ROM yn wallus.\n"
-"Gwiriwch y CD-ROM ar gyfrifiadur wedi ei osod gan ddefnyddio \"rpm -qpl "
-"Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm:1
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Pwynt gosod dyblyg %s"
+"Methu dadsetio'r pwynt gosod gan fod y rhaniad yn cael ei ddefnyddio ar "
+"gyfer cylch-ĂŽl\n"
+"Tynnu'r cylch-ĂŽl yn gyntaf"
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
msgstr ""
-"Digwyddodd gwall ond wn i ddim sut i ddelio ag ef yn dwt.\n"
-"Mae'n beryglus i barhau."
-
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Please wait"
-msgstr "Arhoswch"
-
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
-#, c-format
-msgid "Ok"
-msgstr "Iawn"
-
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
-#, c-format
-msgid "Finish"
-msgstr "Gorffen"
-
-#: ../../interactive.pm:1 ../../standalone/draksec:1
-#, c-format
-msgid "Basic"
-msgstr "Elfennol"
+"Nid oes modd cychwyn y ffurfweddiad rhwydwaith wnaed yn ystod y gosodiad. "
+"Gwiriwch p'un ai yw'r rhwydwaith yn darparu mynediad ar ĂŽl cychwyn eich "
+"system a chywiro'r ffurfweddiad gan ddefnyddio Canolfan Rheoli Mandrake, "
+"adran \"Rhwydwaith a'r Rhyngrwyd\"/\"Cysylltiad\", ac yna gosod yr "
+"argraffydd, eto gan ddefnyddio Canolfan Rheoli Mandrake, adran \"Caledwedd\"/"
+"\"Argraffydd\""
-#: ../../interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Advanced"
-msgstr "Uwch"
+msgid "USB controllers"
+msgstr "Rheolyddion USB"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Remove"
-msgstr "Tynnu"
+msgid "What norm is your TV using?"
+msgstr "Pa norm mae eich teledu'n ei ddefnyddio?"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Modify"
-msgstr "Newid"
+msgid "Type:"
+msgstr "Math: "
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Add"
-msgstr "Ychwanegu"
+msgid "Share name"
+msgstr "Rhannu enw"
-#: ../../interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Choose a file"
-msgstr "Dewis ffeil"
+msgid "enable"
+msgstr "galluogi"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
msgstr ""
-"Yma medrwch ddewis yr bysell neu gyfuniad o fysellau fydd yn\n"
-"caniatĂĄu newid rhwng bysellfyrddau gwahanol (e.e.: lladin neu\n"
-"arall)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "Bysell \"Windows\" de"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Left \"Windows\" key"
-msgstr "Bysell \"Windows\" chwith"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "\"Menu\" key"
-msgstr "Bysell \"Dewislen\""
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Bysellau Alt a Shift gyda'i gilydd"
+"Cysylltu Ăą safle Mandrake Linux i estyn rhestr o'r drychau sydd ar gael"
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Bysellau Ctrl ac Alt gyda'i gilydd"
+msgid ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
+msgstr ""
+"Digwyddodd gwall wrth ail gychwyn y rhwydwaith:\n"
+"\n"
+"%s"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "CapsLock key"
-msgstr "Bysell CapsLock"
+msgid "Remove the loopback file?"
+msgstr "Tynnu'r ffeil cylch-ĂŽl?"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Bysellau Control a Shift gyda'i gilydd"
+msgid "Selected size is larger than available space"
+msgstr "Mae'r maint ddewiswyd yn fwy na'r lle ar gael"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "Y ddwy fysell Shift gyda'i gilydd"
+msgid "NCP server name missing!"
+msgstr "Mae enw gwasanaethwr NCP ar goll!"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Right Alt key"
-msgstr "Bysell Alt dde"
+msgid "Please choose your country."
+msgstr "Dewiswch eich gwlad."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Yugoslavian (latin)"
-msgstr "Iwgoslafaidd (lladin)"
+msgid "Hard Disk Backup files..."
+msgstr "Ffeiliau cadw wrth gefn y Disg Caled"
#: ../../keyboard.pm:1
#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Fietnamëaidd \"rhes rhifol\" QWERTY"
+msgid "Laotian"
+msgstr "Latfieg"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "US keyboard (international)"
-msgstr "Bysellfwrdd UDA (rhyngwladol)"
+msgid "Samoa"
+msgstr "Samoa"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "US keyboard"
-msgstr "Bysellfwrdd UDA"
+msgid ""
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
+msgstr ""
+"Mae'r protocol rstat yn caniatĂĄu i ddefnyddwyr rhwydwaith \n"
+"i adennill metric perfformaid unrhyw beiriant ar y rhwydwaith."
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "UK keyboard"
-msgstr "Bysellfwrdd DG"
+msgid "Re-generating list of configured scanners ..."
+msgstr "Ailgynhyrchu rhestr o sganwyr wedi eu ffurfweddu..."
-#: ../../keyboard.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Ukrainian"
-msgstr "Wcranaidd"
+msgid "Scanner"
+msgstr "Sganiwr"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Twrcaidd (model modern \"Q\")"
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr "Rhybudd: gall profi'r cerdyn graffeg hwn rewi eich cyfrifiadur"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Twrcaidd (model traddodiadol \"F\")"
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr ""
+"Rhaid i'r enw defnyddiwr gynnwys dim ond llythrennau bach, rhifau, '-' a '_'"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Tajik keyboard"
-msgstr "Bysellfwrdd Tajig"
+msgid "Menudrake"
+msgstr "Menudrake"
-#: ../../keyboard.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Thai keyboard"
-msgstr "Bysellfwrdd Thai"
+msgid "Welcome To Crackers"
+msgstr "Croeso i Crackers"
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "Tamil (cynllun teipiadur)"
+msgid "Module options:"
+msgstr "Dewisiadau modiwl:"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr "Tamil (cynllun TSCII)"
+msgid "Secure your networks with the Multi Network Firewall"
+msgstr "Gwnewch eich rhwydwaith yn ddiogel gyda'r Multi Network Firewall"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Serbian (cyrillic)"
-msgstr "Serbaidd (cyrilig)"
+msgid "Go on without configuring the network"
+msgstr "Mynd yn eich blaen heb ffurfweddu'r rhwydwaith"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Slovacaidd (QWERTY)"
+msgid "Abort"
+msgstr "Peidio"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Slofacaidd (QWERTZ)"
+msgid "No password prompt on %s at port %s"
+msgstr "Dim cais am gyfrinair ar %s ym mhorth %s"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Slovenian"
-msgstr "Slfenaidd"
+msgid "Please check if you want to use the non-rewinding device."
+msgstr ""
+"Gwiriwch os ydych am ddefnyddio'r dyfais nad yw'n mynd nĂŽl i'e ddechrau."
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Swedish"
-msgstr "Swedaidd"
+msgid "Usage of remote scanners"
+msgstr "Defnyddiwch o sganwyr pell"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Russian (Yawerty)"
-msgstr "Rwsiaidd (Yawerty)"
+msgid "\t-CDROM.\n"
+msgstr "\t-CDROM.\n"
-#: ../../keyboard.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Russian"
-msgstr "Rwsiaidd"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
+msgstr ""
+"Mae eich rhaniad Windows yn rhy ysgyriog, rhedwch \"defrag\" yn gyntaf o dan "
+"Windows ac yna ailgychwyn gosodi Mandrake Linux."
#: ../../keyboard.pm:1
#, c-format
-msgid "Romanian (qwerty)"
-msgstr "Romanaidd (qwerty)"
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak (Norwyaidd)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Romanian (qwertz)"
-msgstr "Romanaidd (qwertz)"
+msgid "Hard Disk Backup Progress..."
+msgstr "Cynnydd Disg Caled wrth Gefn..."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Canadian (Quebec)"
-msgstr "Canada (Quebec)"
+msgid "Unable to fork: %s"
+msgstr "Methu fforchio: %s"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Portuguese"
-msgstr "Portiwgalaidd"
+msgid "Type: "
+msgstr "Math: "
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Pwylaidd (gosodiad qwerty)"
+msgid "<-- Edit Client"
+msgstr "<-- Golygu Cleient"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Pwylaidd (gosodiad qwerty)"
+msgid "no fonts found"
+msgstr "heb ganfod ffontiau"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Norwegian"
-msgstr "Norwyaidd"
+msgid "Mouse"
+msgstr "Llygoden"
-#: ../../keyboard.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Dutch"
-msgstr "Isalmaenaidd"
+msgid "not enough room in /boot"
+msgstr "dim digon o le yn /boot"
-#: ../../keyboard.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Maltese (US)"
-msgstr "Malteg (UDA)"
+msgid "Choosing an arbitratry driver"
+msgstr "Dewis gyrrwr ar hap"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Maltese (UK)"
-msgstr "Malteg (DU)"
+msgid "Host name"
+msgstr "Enw gwesteiwr"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Mongoleg (cyrillic)"
+msgid "Liechtenstein"
+msgstr "Liechtenstein"
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Myanmar (Burmese)"
-msgstr "Myanmar (Burma)"
+msgid "the color of the progress bar"
+msgstr "lliw'r bar cynnydd"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Macedonian"
-msgstr "Macedonaidd"
+msgid "Suppress Fonts Files"
+msgstr "Llethu ffeiliau Ffontiau"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Malayalam"
-msgstr "Malayalam"
+msgid "Add to RAID"
+msgstr "Ychwanegu i RAID"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Latvian"
-msgstr "Latfiaidd"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
+"Mae modd i chi gynnig cofnodion eraill ar gyfer yaboot, un ai systemau\n"
+"gweithredol eraill, cnewyll eraill, neu ddelwedd cychwyn argyfwng.\n"
+"\n"
+"Ar gyfer systemau gweithredu eraill, mae'r cofnod yn cynnwys label a'r\n"
+"rhaniad root yn unig\n"
+"\n"
+"Ar gyfer LInux, mae yna rhai dewisiadau:\n"
+"\n"
+" *Label:sef yr enw fyddwch yn ei deipio yn anogwr yaboot i ddewis ydewis "
+"cychwyn.\n"
+"\n"
+" *Image: hwn fydd enw'r cnewyllyn i'w gychwyn. Fel rheol, vimlinux neu\n"
+"amrywiad ohono gydag estyniad\n"
+"\n"
+" *Root: y ddyfais \"root\" neu \"/\" ar gyfer eich gosodiad Linux.\n"
+"\n"
+" *Append: ar galedwedd Apple, mae dewis atodi cnewyllyn yn cael ei\n"
+"ddefnyddio'n eithaf aml i gynorthwyo cychwyn caledwedd fideo neu i\n"
+"alluogi efelychiad o'r llygoden bysellfwrdd sydd ar goll ar yr ail a'r "
+"trydydd\n"
+"botwm llygoden llygod arferol Apple. Dyma rhai enghreifftiau:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: mae modd defnyddio'r dewis hwn i un ai lwytho'r modiwlau "
+"cychwynnol,\n"
+" cydnabod y ddyfais cychwyn ar gael, neu i lwytho delwedd ramdisg ar gyfer\n"
+" cychwyn argyfwng.\n"
+"\n"
+" * Initrd-size: maint y ddelwedd ramdisg arferol yw 4,096bid. Os ydych "
+"angen\n"
+"dyrannu ramdisg mawr, mae modd defnyddio'r dewis hwn.\n"
+"\n"
+" * Read-write:fel rheol mae'r rhaniad \"root\" yn cael ei agor fel darllern "
+"yn unig, i\n"
+" ganiatĂĄu gwiriad system ffeiliau cyn i'r system ddod yn \"fyw\". Yma mae "
+"modd\n"
+" diystyru'r dewis hwn.\n"
+"\n"
+" * NoVideo: petai caledwedd Apple yn profi i fod yn peri anawsterau "
+"sylweddol,\n"
+" mae modd i chi ddewis cychwyn mewn modd \"novideo\", gyda chynhaliaeth\n"
+" ffrĂąm byffer cynhenid\n"
+"\n"
+" * Default: dyma'r cyflwr rhagosodedig, dewiswch hwn drwy bwyso ENTER at\n"
+" anogwr yaboot. Bydd y cofnod hefyd wedi ei amlygu gyda \"*\", os wnewch "
+"chi\n"
+" bwyso ar [Tab] i weld dewisiadau'r cychwyn."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lithuenaidd \"ffonetig\" QWERTY"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"Mae argraffydd \"%s\" wedi ei ychwanegu'n llwyddiannus i Star Office/"
+"OpenOffice.org/GIMP."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lithuenaidd \"rhes rhif\" QWERTY"
+msgid "No floppy drive available!"
+msgstr "Does dim gyrrwr disg meddal ar gael!"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lithuenaidd AZERTY (newydd)"
+msgid ""
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
+msgstr ""
+"I wybod am y dewisiadau sydd ar gael ar gyfer yr argraffydd, darllenwch un "
+"ai'r rhestr isod neu cliciwch ar y botwm \"Rhestr dewis argraffu\".%s%s%s\n"
+"\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lithuenaidd AZERTY (hen)"
+msgid "Continue anyway?"
+msgstr "Parhau beth bynnag?"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Laotian"
-msgstr "Latfieg"
+msgid ""
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
+msgstr ""
+"Nid yw eich argraffydd wedi ei rhestri, dewiswch un cyfatebol (gw. llawlyfr "
+"eich argraffydd) neu un tebyg."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Latin American"
-msgstr "Lladin America"
+msgid "Printer"
+msgstr "Argraffydd"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Korean keyboard"
-msgstr "Bysellfwrdd Coreaidd"
+msgid "Saudi Arabia"
+msgstr "Saudi Arabia"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Japanese 106 keys"
-msgstr "Siapaëaidd 106 bysell"
+msgid "Internet"
+msgstr "Rhyngrwyd"
-#: ../../keyboard.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Inuktitut"
-msgstr "Inuktitut"
+msgid "Some devices were added:\n"
+msgstr "Cafodd rhai dyfeisiau eu hychwanegu:\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Italian"
-msgstr "Eidalaidd"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "Geometreg: %s silindr, %s pen, %s sector\n"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Icelandic"
-msgstr "Eislandaidd"
+msgid "Printing on the printer \"%s\""
+msgstr "Argraffu ar argraffydd \"%s\""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Iranian"
-msgstr "Iranaidd"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr ""
+"Mae /etc/hosts.allow and /etc/hosts.deny wedi eu ffurfweddu - dim newid"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "Israelaidd (Ffonetig)"
+msgid "Restore From Tape"
+msgstr "Adfer o DĂąp"
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Israeli"
-msgstr "Israelaidd"
+msgid "Choose the profile to configure"
+msgstr "Dewiswch broffil i'w ffurfweddu"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Croatian"
-msgstr "Croataidd"
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
+msgstr ""
+"\n"
+"\n"
+"Rhowch enw gwesteiwr Zeroconf heb ddot os nad ydych\n"
+"am ddefnyddio'r enw gwesteiwr rhagosodedig."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hungarian"
-msgstr "Hwngaraidd"
+msgid "Backup Now from configuration file"
+msgstr "Cadwch wrth Gefn eich ffeiliau ffurfweddu"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Gurmukhi"
-msgstr "Gurmukhi"
+msgid "Mount points should contain only alphanumerical characters"
+msgstr "Dylai enw'r pwyntiau gosod gynnwys llythrennau a rhifau'n unig"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Gujarati"
-msgstr "Gujarati"
+msgid "Restarting printing system..."
+msgstr "Ailgychwyn system argraffu..."
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Greek"
-msgstr "Groegaidd"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
+msgstr ""
+"Ymresymiadau: (name)\n"
+"\n"
+"Ychwanegu'r enw fel eithriad i drin cyfrinair yn erbyn msec."
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgaidd (gosodiad \"Lladinaidd\")"
+msgid "See hardware info"
+msgstr "Gweler gwybodaeth am galedwedd"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgaidd (gosodiad \"Rwsiaidd\")"
+msgid "First sector of boot partition"
+msgstr "Adran gyntaf o'r rhaniad cychwyn"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "French"
-msgstr "Ffrengig"
+msgid "Printer manufacturer, model"
+msgstr "Gwneuthurwr yr argraffydd, model"
-#: ../../keyboard.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Finnish"
-msgstr "Ffinaidd"
+msgid "PDQ - Print, Don't Queue"
+msgstr "PDQ - Print, Don't Queue"
-#: ../../keyboard.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Spanish"
-msgstr "Spaenaidd"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
+msgstr ""
+"[DEWISIADAU]...\n"
+"Ffurfweddwr Gwasanaethwr Terfynell Mandrake\n"
+"--enable : galluogi MTS\n"
+"--disable : analluogi MTS\n"
+"--start : cychwyn MTS\n"
+"--stop : atal MTS\n"
+"--adduser : ychwanegu defnyddiwr system presennol i MTS (angen enw "
+"defnyddiwr)\n"
+"--deluser : dileu defnyddiwr system presennol o MTS (angen enw "
+"defnyddiwr)\n"
+"--addclient : ychwanegu peiriant cleient i MTS (angen cyfeiriad MAC, "
+"IP, enw delwedd nbi)\n"
+"--delclient : dileu peiriant cleient i MTS (angen cyfeiriad MAC, IP, "
+"enw delwedd nbi)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Estonian"
-msgstr "Estonaidd"
+msgid "Subnet Mask:"
+msgstr "Masg Isnet"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Swedaidd)"
+msgid "LiLo and Bootsplash themes installation successfull"
+msgstr "ThemĂąu LiLo a Croeso Cychwyn wedi eu gosod yn llwyddiannus"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norwyaidd)"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"Y ddau baramedr pwysig yw'r raddfa adnewyddu fertigol, sef y raddfa mae'r\n"
+"holl sgrĂźn yn cael ei adnewyddu, ac yn fwyaf pwysig y raddfa cydamseru\n"
+"llorweddol, sef y raddfa mae'r llinellau sganio'n cael eu dangos.\n"
+"\n"
+"Mae'n BWYSIG IAWN nad ydych yn enwi monitor gyda graddfa cydamseru\n"
+"sydd tu hwnt i allu eich monitor: mae modd difrodi eich monitor drwy wneud "
+"hynny.\n"
+"Os oes gennych amheuaeth, dewiswch raddfa is."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak (UDA)"
+msgid "Modify"
+msgstr "Newid"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Danish"
-msgstr "Danaidd"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
+"\n"
+"Mae'r gorchmynion \"%s\" a \"%s\" hefyd yn caniatĂĄu newid y gosodiadau dewis "
+"ar gyfer tasg argraffu penodol. Ychwanegwch y gosodiadau angenrheidiol i'r "
+"llinell gorchymyn, e.e \"%s <file>\".\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Devanagari"
-msgstr "Devanagari"
+msgid "Need hostname, username and password!"
+msgstr "Angen enw gwesteiwr, enw defnyddiwr a chyfrinair"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "German (no dead keys)"
-msgstr "Almaenaidd (dim bysellau marw)"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
+"Protocol yw WebDAV sy'n eich caniatĂĄu i chi osod gwasanaethwr gwe'n lleol\n"
+"a'i drin fel system ffeilio lleol ( ar yr amod bod y gwasanaethwr lleol wedi "
+"ei\n"
+"ffurfweddi fel gwasanaethwr WebDAV). Os hoffech ychwanegu pwyntiau\n"
+"gosod WebDAV, dewiswch \"Newydd\""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "German"
-msgstr "Almaeneg"
+msgid "HardDrake"
+msgstr "HardDrake"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Czech (QWERTY)"
-msgstr "Tsiec (QWERTY)"
+msgid "new"
+msgstr "newydd"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Czech (QWERTZ)"
-msgstr "Tsiec (QWERTY)"
+msgid "Would you like to try again?"
+msgstr "Hoffech chi geisio eto?"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Swiss (French layout)"
-msgstr "Swisaidd (gosodiad Ffrengig)"
+msgid "Wizard"
+msgstr "Dewin"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Swiss (German layout)"
-msgstr "Swisaidd (gosodiad Almaenig)"
+msgid "Edit selected server"
+msgstr "Golygu'r gwesteiwr"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belarusian"
-msgstr "Belarusaidd"
+msgid "Please choose where you want to backup"
+msgstr "Dewiswch i le rydych am gadw ffeiliau wrth gefn"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bosnian"
-msgstr "Bosnieg"
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr ""
+"Bydd angen i chi ail gychwyn cyn i'r newidiadau yn eich tabl rhaniad ddigwydd"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasilaidd (ABNT-2)"
+msgid "Do not include the browser cache"
+msgstr "Peidio cynnwys storfa'r porwr"
-#: ../../keyboard.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Bulgarian (BDS)"
-msgstr "Bwlgaraidd (BDS)"
+msgid "Please, choose your keyboard layout."
+msgstr "Dewiswch gynllun allweddell"
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "Bwlgaraidd (ffonetig)"
+msgid "Standard"
+msgstr "Safonol"
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Bengali"
-msgstr "Bengali"
+msgid "Please choose your mouse type."
+msgstr "Dewiswch math eich llygoden"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Belgian"
-msgstr "Belgaidd"
+msgid "Connect..."
+msgstr "Cysylltu..."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjan (lladin)"
+msgid "Failed to configure printer \"%s\"!"
+msgstr "Methu ffurfweddu argraffydd \"%s\"!"
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Arabic"
-msgstr "Arabeg"
+msgid "not configured"
+msgstr "heb ffurfweddu"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Armenian (phonetic)"
-msgstr "Armenaidd (ffonetig)"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Armenian (typewriter)"
-msgstr "Armenaidd (teipiadur)"
+msgid "About"
+msgstr "Ynghylch"
-#: ../../keyboard.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Armenian (old)"
-msgstr "Armenaidd (hen)"
+msgid "Proxies configuration"
+msgstr "Ffurfweddiad dirprwyon"
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Albanian"
-msgstr "Albaniaidd"
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Polish"
-msgstr "Pwylaidd"
+msgid "Start: sector %s\n"
+msgstr "Dechrau: sector %s\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Dvorak"
-msgstr "Dvorak"
+msgid "Network interface already configured"
+msgstr "Mae rhag wyneb y rhwydwaith wedi ei ffurfwedu eisoes"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Zimbabwe"
-msgstr "Zimbabwe"
+msgid "Couldn't access the floppy!"
+msgstr "Maethu cael mynediad i'r disg meddal!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Zambia"
-msgstr "Zambia"
+msgid "connecting to Bugzilla wizard ..."
+msgstr "cysylltwyd Ăą dewin Bugzilla..."
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "South Africa"
-msgstr "De Affrica"
+msgid "Mail Server"
+msgstr "Gwasanaethwr E-bost"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Serbia"
-msgstr "Serbia"
+msgid "Please click on a partition"
+msgstr "Cliciwch ar raniad"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Mayotte"
-msgstr "Mayotte"
+msgid "Linux"
+msgstr "Linux"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Yemen"
-msgstr "Yemen"
+msgid "Have a nice day!"
+msgstr "Diwrnod da i chi!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Samoa"
-msgstr "Samoa"
+msgid "across Network"
+msgstr "ar draws Rhwydwaith"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Wallis and Futuna"
-msgstr "Wallis a Futuna"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Vanuatu"
-msgstr "Vanuatu"
+msgid "Upgrade %s"
+msgstr "Diweddaru %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Vietnam"
-msgstr "Fietnam"
+msgid "Select Printer Connection"
+msgstr "Dewiswch Gysylltiad Argraffydd"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Virgin Islands (U.S.)"
+msgid "Scanning for TV channels in progress ..."
+msgstr "Wrthi'n sganio am sianeli Teledu ..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Virgin Islands (British)"
-msgstr "Virgin Islands (British)"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
+"Gwall wrth anfon ffeil drwy FTP.\n"
+" Cywirwch eich ffurfweddiad FTP."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Venezuela"
-msgstr "Venezuela"
+msgid "IP Range Start:"
+msgstr "Cychwyn Amrediad IP:"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "Saint Vincent and the Grenadines"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"Mae daemon uwchwasanaethwr rhyngrwyd (inetd) yn cychwyn nifer\n"
+"o wasanaethau rhyngrwyd eraill, yn ĂŽl y galw. Mae'n gyfrifol am gychwyn\n"
+"nifer o wasanaethau, gan gynnwys telnet, ftp, rsh a rlogin. Mae analluogi \n"
+"inetd yn analluogi'r holl wasanaethau mae'n gyfrifol amdanynt."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Vatican"
-msgstr "Vatican"
+msgid "the height of the progress bar"
+msgstr "uchder y bar cynnydd"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Uzbekistan"
-msgstr "Uzbekistan"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
+"\n"
+"- Cadw drwy %s ar westeiwr: %s\n"
-#: ../../lang.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Uruguay"
-msgstr "Uruguay"
+msgid "Argentina"
+msgstr "Yr Ariannin"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "United States Minor Outlying Islands"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
+msgstr ""
+"Ymredymiadau: (arg)\n"
+"\n"
+"GaniatĂĄu/Gwrthod darlledu icmp atsain."
-#: ../../lang.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Uganda"
-msgstr "Uganda"
+msgid "Domain Name Server"
+msgstr "Gwasanaethwr Enw Parth"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Ukraine"
-msgstr "Wcrain"
+msgid "Security Level:"
+msgstr "Lefel diogelwch:"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Tanzania"
-msgstr "Tanzania"
+msgid "Mount points must begin with a leading /"
+msgstr "Rhaid i bwyntiau gosod gynnwys / arweiniol"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Taiwan"
-msgstr "Taiwan"
+msgid "Postfix Mail Server"
+msgstr "Gwasanaethwr E-bost Postfix"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Tuvalu"
-msgstr "Tuvalu"
+msgid "Quit without saving"
+msgstr "Gorffen heb gadw"
#: ../../lang.pm:1
#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Trinidad a Tobago"
+msgid "Yemen"
+msgstr "Yemen"
-#: ../../lang.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Turkey"
-msgstr "Twrci"
+msgid "This product is available on the MandrakeStore Web site."
+msgstr "Mae'r cynnyrch ar gael ar safle gwe MandrakeStore"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Tonga"
-msgstr "Tonga"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr ""
+"Rhowch y maint mwyaf\n"
+"i'w ganiatĂĄu ar gyfer Drakbackup"
-#: ../../lang.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Tunisia"
-msgstr "Tunisia"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr "=> Mae yna lawer i ddewis o (%s).\n"
-#: ../../lang.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Turkmenistan"
-msgstr "Turkmenistan"
+msgid "Hard drive detection"
+msgstr "Canfod disg caled"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "East Timor"
-msgstr "Dwyrain Timor"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
+"Nid ydych wedi dewis unrhyw grwpiau o becynnau.\n"
+"Dewiswch y gosodiad lleiaf rydych ei eisiau"
-#: ../../lang.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Tokelau"
-msgstr "Tokelau"
+msgid "Please enter the WebDAV server URL"
+msgstr "Rhowch URL gwasanaethwr WebDAV"
#: ../../lang.pm:1
#, c-format
msgid "Tajikistan"
msgstr "Tajikistan"
-#: ../../lang.pm:1
-#, c-format
-msgid "Thailand"
-msgstr "Gwlad Thail"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Togo"
-msgstr "Togo"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "French Southern Territories"
-msgstr "French Southern Territories"
-
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Chad"
-msgstr "Chad"
+msgid "Accept"
+msgstr "Derbyn"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "Turks and Caicos Islands"
+msgid "Description"
+msgstr "Disgrifiad"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Swaziland"
-msgstr "Swaziland"
+msgid "Error opening %s for writing: %s"
+msgstr "Gwall wrth agos %s ar gyfer ysgrifennu %s"
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Syria"
-msgstr "Syria"
+msgid "Mouse type: %s\n"
+msgstr "Math o lygoden: %s\n"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "El Salvador"
-msgstr "El Salvador"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr ""
+"Mae modd i'ch cerdyn gael cefnogaeth cyflymu caledwedd 3D gyda XFree %s"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sao Tome and Principe"
-msgstr "Sao Tome a Principe"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "Dewiswch maint eich gofod CD/DVD"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Suriname"
-msgstr "Suriname"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
+msgstr ""
+"Ymresymiadau: (arg)\n"
+"\n"
+" Galluogu su o aelodau grwp olwyn yn unig neu ganiatĂĄu su o unrhyw "
+"ddefnyddiwr."
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Somalia"
-msgstr "Somalia"
+msgid "Expert Area"
+msgstr "Maes Uwch"
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Senegal"
-msgstr "Senegal"
+msgid "Choose a monitor"
+msgstr "Dewiswch fonitor"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "San Marino"
-msgstr "San Marino"
+msgid "Empty label not allowed"
+msgstr "Nid yw label gwag yn cael ei ganiatĂĄu"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Sierra Leone"
-msgstr "Sierra Leone"
+msgid "Maltese (UK)"
+msgstr "Malteg (DU)"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Slovakia"
-msgstr "Slofacia"
+msgid "I can't add any more partition"
+msgstr "Does dim modd ychwanegu raniadau ychwanegol"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Svalbard and Jan Mayen Islands"
+msgid "Size in MB: "
+msgstr "Maint mewn MB: "
-#: ../../lang.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Slovenia"
-msgstr "Slovenia"
+msgid "Remote printer"
+msgstr "Argraffydd pell"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Saint Helena"
-msgstr "Saint Helena"
+msgid "Please choose a language to use."
+msgstr "Dewiswch iaith i'w defnyddio."
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Singapore"
-msgstr "Singapore"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
+"Rhybudd!! Cafodd y ddyfais hon ei ffurfweddu o'r blaen i gysylltu Ăą'r "
+"Rhyngrwyd.\n"
+"Derbyniwch y cynnig i gadw'r ddyfais wedi ei ffurfweddi.\n"
+"Bydd newid y meysydd islaw'n newid y ffurfweddiad."
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Sudan"
-msgstr "Swdan"
+msgid "I can set up your computer to automatically log on one user."
+msgstr "Mewngofnodi'n awtomatig ar gyfer un defnyddiwr."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Seychelles"
-msgstr "Seychelles"
+msgid "Floppy format"
+msgstr "Fformatio disg meddal"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Solomon Islands"
-msgstr "Solomon Islands"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Saudi Arabia"
-msgstr "Saudi Arabia"
+msgid "Generic Printers"
+msgstr "Argraffyddion Generig"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Rwanda"
-msgstr "Rwanda"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
+msgstr ""
+"Dewiswch yr argraffydd i drin y gwaith argraffu neu rhowch enw dyfais/ffeil "
+"ar y ninell mewnbwn"
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Russia"
-msgstr "Rwsia"
+msgid "The scanners on this machine are available to other computers"
+msgstr "Mae' sganwyr y cyfrifiadur hwn ar gael ar gyfer rhai eraill"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Romania"
-msgstr "Rwmania"
+msgid "First sector of the root partition"
+msgstr "Adran gyntaf o'r rhaniad gwraidd"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Reunion"
-msgstr "Reunion"
+msgid "Alternative drivers"
+msgstr "Gyrrwyr eraill"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Qatar"
-msgstr "Qatar"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
+"\n"
+"Gwiriwch pob dewis sydd angen arnoch.\n"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Palau"
-msgstr "Palau"
+msgid "Initrd"
+msgstr "Initrd"
#: ../../lang.pm:1
#, c-format
-msgid "Paraguay"
-msgstr "Paraguay"
+msgid "Cape Verde"
+msgstr "Cape Verde"
-#: ../../lang.pm:1
-#, c-format
-msgid "Portugal"
-msgstr "Portiwgal"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr "A oes gan y cpu y Cyrix 6x86 Coma bug"
-#: ../../lang.pm:1
-#, c-format
-msgid "Palestine"
-msgstr "Palestinia"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr ""
+"Roedd rhai Pentium cynnar yn wallus ac yn rhewi wrth ddadgodio F00F bytecode"
#: ../../lang.pm:1
#, c-format
-msgid "Puerto Rico"
-msgstr "Puerto Rico"
+msgid "Guam"
+msgstr "Guam"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pitcairn"
-msgstr "Pitcairn"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
+msgstr ""
+"Dewiswch y porth y mae eich argraffydd wedi cysylltu iddo neu rhowch enw "
+"dyfais/ffeil ar y llinell mewnbwn"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "Saint Pierre a Miquelon"
+msgid "/Options/Test"
+msgstr "/Dewisiadau/Test"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Poland"
-msgstr "Gwlad Pwyl"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+"Rhaid defnyddio'r lefel hwn gyda gofal. Mae'n gwneud eich system yn haws ei\n"
+"ddefnyddio ond mae'n sensitif iawn: rhaid peidio defnyddio'r peiriant i'w\n"
+"gysylltu ag eraill nag i'r Rhyngrwyd. Does dim cysylltiad drwy gyfrinair."
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Pakistan"
-msgstr "Pacistan"
+msgid "Mounting partition %s"
+msgstr "Yn fformatio rhaniad %s"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Philippines"
-msgstr "Philippines"
+msgid "User name"
+msgstr "Enw defnyddiwr"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Papua New Guinea"
-msgstr "Papua New Guinea"
+msgid "New configuration (isdn-light)"
+msgstr "Ffurfweddiad newydd (isdn-light)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "French Polynesia"
-msgstr "French Polynesia"
+msgid "Userdrake"
+msgstr "Userdrake"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Peru"
-msgstr "Periw"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "Pa raniad hoffech chi ei ddefnyddio ar gyfer Linux4Win?"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Panama"
-msgstr "Panama"
+msgid "Backup system"
+msgstr "System cadw wrth gefn"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Oman"
-msgstr "Oman"
+msgid "Test pages"
+msgstr "Tudalennau prawf"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "New Zealand"
-msgstr "Seland Newydd"
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
+"Rhestr o ddata i'w adfer:\n"
+"\n"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Niue"
-msgstr "Niue"
+msgid "Checking %s"
+msgstr "Gwirio %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Nauru"
-msgstr "Nauru"
+msgid "TCP/Socket Printer Options"
+msgstr "Dewisiadau Argraffydd TCP/Soced"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Nepal"
-msgstr "Nepal"
+msgid "Card mem (DMA)"
+msgstr "Cof Cerdyn (DMA)"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Nicaragua"
-msgstr "Nicaragua"
+msgid "France"
+msgstr "Ffrainc"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Nigeria"
-msgstr "Nigeria"
+msgid "browse"
+msgstr "pori"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Norfolk Island"
-msgstr "Norfolk Island"
+msgid "Checking installed software..."
+msgstr "Gwirio'r meddalwedd sydd wedi ei osod..."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Niger"
-msgstr "Niger"
+msgid "Remote printer name missing!"
+msgstr "Mae enw'r argraffydd pell ar goll!"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New Caledonia"
-msgstr "New Caledonia"
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "Ydych chi am alluogi argraffu ar argraffydd mewn rhwydwaith leol?\n"
#: ../../lang.pm:1
#, c-format
-msgid "Namibia"
-msgstr "Namibia"
+msgid "Turkey"
+msgstr "Twrci"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Mozambique"
-msgstr "Mozambique"
+msgid "Alcatel speedtouch usb"
+msgstr "usb Alcatel Speedtouch"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Malaysia"
-msgstr "Malaysia"
+msgid "Number of buttons"
+msgstr "Nifer o fotymau"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Mexico"
-msgstr "Mecsico"
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Fietnamëaidd \"rhes rhifol\" QWERTY"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Malawi"
-msgstr "Malawi"
+msgid "Module"
+msgstr "Modiwl"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Maldives"
-msgstr "Maldives"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
+msgstr ""
+"Yn ogystal, nid oes modd trosglwyddo rhesi grewyd gan y rhaglen hon na "
+"\"foomatic-configure\"."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mauritius"
-msgstr "Mauritius"
+msgid "Hardware"
+msgstr "Caledwedd"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Malta"
-msgstr "Malta"
+msgid "Ctrl and Alt keys simultaneously"
+msgstr "Bysellau Ctrl ac Alt gyda'i gilydd"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Montserrat"
-msgstr "Montserrat"
+msgid "United States"
+msgstr "Yr Unol Daleithiau"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mauritania"
-msgstr "Mauritania"
+msgid "Default OS?"
+msgstr "System Weithredu Rhagosodedig?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Martinique"
-msgstr "Martinique"
+msgid "Swiss (German layout)"
+msgstr "Swisaidd (gosodiad Almaenig)"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Northern Mariana Islands"
-msgstr "Northern Mariana Islands"
+msgid "Configure all heads independently"
+msgstr "Ffurfweddu pob pen yn annibynnol"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mongolia"
-msgstr "Mongolia"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr ""
+"Dewiswch yr argraffydd rydych am ei osod. Bydd ffurfweddu'r argraffydd yn "
+"digwydd yn awtomatig. Os na chafodd eich argraffydd ei ganfod yn gywir neu "
+"byddai'n well gennych ffurfweddiad unigryw i'ch argraffydd, cychwynnwch "
+"\"Ffurfweddiad gyda Llaw\"."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Myanmar"
-msgstr "Myanmar"
+msgid "NTP Server"
+msgstr "Gweinydd NTP"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Mali"
-msgstr "Mali"
+msgid "Load/Save on floppy"
+msgstr "LLwytho/Cadw ar ddisg meddal"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Macedonia"
-msgstr "Macedonia"
+msgid "This theme does not yet have a bootsplash in %s !"
+msgstr "Does gan y thema ddim croeso cychwyn yn %s !"
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Marshall Islands"
-msgstr "Marshall Islands"
+msgid "nice"
+msgstr "hyfryd"
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Madagascar"
-msgstr "Madagascar"
+msgid "Leaving in %d seconds"
+msgstr "Gadael mewn %d eiliad"
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Moldova"
-msgstr "Moldova"
+msgid "Please choose which serial port your modem is connected to."
+msgstr "Dewiswch ba borth cyfresol mae eich modem wedi cysylltu iddo."
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Monaco"
-msgstr "Monaco"
+msgid "Country"
+msgstr "Gwlad"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Morocco"
-msgstr "Morocco"
+msgid "Property"
+msgstr "Eiddo"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Libya"
-msgstr "Libya"
+msgid "Ghostscript"
+msgstr "Ghostscript"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Latvia"
-msgstr "Latfia"
+msgid "LAN Configuration"
+msgstr "Ffurfweddiad Rhwydwaith Lleol (LAN)"
#: ../../lang.pm:1
#, c-format
-msgid "Luxembourg"
-msgstr "Luxembourg"
+msgid "Ghana"
+msgstr "Ghana"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lithuania"
-msgstr "Lithuania"
+msgid "Path or Module required"
+msgstr "Llwybr neu Fodiwl angenrheidiol"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Lesotho"
-msgstr "Lesotho"
+msgid "Advanced Options"
+msgstr "Dewisiadau Uwch"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Liberia"
-msgstr "Liberia"
+msgid "Coma bug"
+msgstr "Coma bug"
-#: ../../lang.pm:1
-#, c-format
-msgid "Sri Lanka"
-msgstr "Sri Lanka"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
+"Yn awr mae angen i chi ddewis pa raniadau i'w defnyddio ar gyfer gosodiad\n"
+"eich system Mandrake Linux. Os oes rhaniadau wedi eu diffinio eisoes, un\n"
+"ai drwy osodiad blaenorol o GNU/Linux neu gan offeryn rhannu arall, mae\n"
+"modd i chi ddefnyddio'r rhaniadau presennol. Os nad, rhaid i' rhaniadau'r\n"
+"ddisg caled gael eu diffinio.\n"
+"\n"
+"I greu rhaniadau, rhaid yn gyntaf ddewis disg caled. Mae modd dewis disg\n"
+"i'w rannu drwy glicio ar \"hda\" ar gyfer y ddisg IDE cyntaf., \"hdb\" ar\n"
+"gyfer yr ail, \"sda\" ar gyfer y ddisg SCSI cyntaf, ac yn y blaen.\n"
+"\n"
+"I greu'r rhaniad, mae modd defnyddio'r dewisiadau hyn:\n"
+"\n"
+" *\"Clirio'r cyfan\": mae'r dewis hwn yn dileu pob rhaniad ar ddisg.\n"
+"\n"
+" *\"Awto ddynodi\": mae'r dewis hwn yn caniatĂĄu i chi greu'n awtomatig\n"
+"Ext2 a rhaniadau cyfnewid mewn lle gwag ar eich disg.\n"
+"\n"
+" *\"Rhagor\": yn rhoi mynediad i ragor o nodweddion:\n"
+"\n"
+" *\"Cadw'r tabl rhaniad\": mae hwn yn cadw'r tabl rhaniad i ddisg\n"
+"meddal. Mae hyn yn ddefnyddiol ar gyfer adfer tabl rhaniad, os fydd angen\n"
+"\n"
+" \"Adfer y tabl rhaniad\": mae hyn yn caniatĂĄu adfer tabl rhaniad "
+"blaenorol\n"
+"o ddisg meddal.\n"
+"\n"
+" \"Achub y tabl rhaniad\": os yw eich tabl rhaniad wedi ei ddifrodi, mae "
+"modd\n"
+"ceisio ei adfer drwy'r dewis yma. Byddwch ofalus a chofiwch fod modd iddo\n"
+"fethu.\n"
+"\n"
+" \"Ai-lwytho'r tabl rhaniad\": mae hwn yn dileu pob newid ac yn ail "
+"lwytho'r\n"
+"tabl rhaniad gwreiddiol.\n"
+"\n"
+" *\"Awto osod cyfrwng symudol\": dad-diciwch y dewis hwn i osod a dad "
+"osod\n"
+"gyda llaw, cyfryngau symudol megis disgiau meddal ac CD-ROMau\n"
+"\n"
+" *\"Dewin\": defnyddiwch y dewis hwn os ydych am ddefnyddio'r dewin i "
+"rannu\n"
+"eich disg caled. Dyma'sydd orau os nad oes gennych wybodaeth sylweddol ar\n"
+"rhannu\n"
+"\n"
+" *\"Dadwneud\": defnyddiwch y dewis hwn i ddileu eich newidiadau\n"
+"\n"
+" *\"Newid o'r modd arferol/arbenigwr\": mae hwn yn caniatĂĄu "
+"gweithredoedd\n"
+"pellach ar raniadau. (Math, dewisiadau, fformat) ac mae'n cynnig mwy o\n"
+" wybodaeth.\n"
+"\n"
+" *\"Gorffen\":pan fyddwch wedi gorffen rhannu eich disg, bydd hwn yn cadw\n"
+" eich newidiadau yn ĂŽl i'r ddisg\n"
+"\n"
+"Sylwer: mae modd cyrraedd y dewisiadau drwy'r bysellfwrdd. Symudwch drwy'r\n"
+" rhaniadau gan ddefnyddio [Tab] a'r saethau [I Fyny/I Lawr].\n"
+"\n"
+"Pan fydd rhaniad wedi ei ddewis, medrwch ddefnyddio:\n"
+"\n"
+" *Ctrl-c i greu rhaniad newydd (pan fo rhaniad gwag yn cael ei ddewis);\n"
+"\n"
+" *Ctrl-d i ddileu rhaniad;\n"
+"\n"
+" *Ctrl-m i greu pwynt gosod;\n"
+"\n"
+"I dderbyn gwybodaeth am yr amrywiol systemau ffeil sydd ar gael, darllenwch "
+"y\n"
+" pennawd ar ext2fs yn y ``Reference Manual''.\n"
+"\n"
+"Os ydych yn gosod ar beiriant PPC, bydd angen i chi greu \"ymlwythwr\" HFS\n"
+" bychan o leiaf 1MB o faint, fydd yn cael ei ddefnyddio gan ymlwythwr "
+"yaboot.\n"
+"Os ydych yn dewis gwneud y rhaniad rhywfaint yn fwy, dyweder tua 50MB, yna\n"
+"gall fod yn le defnyddiol i gadw cnewyllyn sbĂąr a delweddau ramdisk ar "
+"gyfer\n"
+" sefyllfaoedd cychwyn argyfyngus!"
-#: ../../lang.pm:1
-#, c-format
-msgid "Liechtenstein"
-msgstr "Liechtenstein"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
+"Cerdyn Greaffig\n"
+"\n"
+" Mae'r gosodwr fel rheol yn canfod ac yn ffurfweddu'n awtomatig\n"
+"y cerdyn graffig sydd ar eich cyfrifiadur. Os nad yw hyn yn wir,\n"
+"dewiswch eich cerdyn o'r rhestr.\n"
+"\n"
+" Mewn achos lle mae gwasanaethwyr eraill i'w cael i'ch cerdyn, gyda\n"
+"neu heb gyflymydd 3D, mae cynnig i chi ddewis y gwasanaethwr gorau\n"
+"ar eich cyfer."
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Saint Lucia"
-msgstr "Saint Lucia"
+msgid "There was an error installing packages:"
+msgstr "Digwyddodd gwall wrth osod pecyn"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lebanon"
-msgstr "Lubanus"
+msgid "Lexmark inkjet configuration"
+msgstr "Ffurfweddiad inkjet Lexmark"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Laos"
-msgstr "Laos"
+msgid "Undo"
+msgstr "Dadwneud"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Kazakhstan"
-msgstr "Kazakhstan"
+msgid "Save partition table"
+msgstr "Cadw'r tabl rhaniad"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Cayman Islands"
-msgstr "Cayman Islands"
+msgid "Finnish"
+msgstr "Ffinaidd"
#: ../../lang.pm:1
#, c-format
-msgid "Kuwait"
-msgstr "Kuwait"
+msgid "Macedonia"
+msgstr "Macedonia"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Korea"
-msgstr "Corea"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
+"Mae'r rhannu yn ĂŽl defnyddiwr yn defnyddio grwp \"rhannu ffeiliau\" .\n"
+"Mae modd defnyddio userdrake i ychwanegu defnyddiwr i'r grwp. "
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Korea (North)"
-msgstr "Corea (Gogledd)"
+msgid "Slovenian"
+msgstr "Slfenaidd"
#: ../../lang.pm:1
#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "Saint Kitts a Nevis"
+msgid "Libya"
+msgstr "Libya"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Comoros"
-msgstr "Comoros"
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr "Ffurfweddio sgriptiau, gosod meddalwedd, cychwyn gwasanaethwyr..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Kiribati"
-msgstr "Kiribati"
+msgid ""
+"\n"
+"- Burn to CD"
+msgstr ""
+"\n"
+"-Llosgi i CD"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Cambodia"
-msgstr "Cambodia"
+msgid "Table"
+msgstr "Tabl"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Kyrgyzstan"
-msgstr "Kyrgyzstan"
+msgid "I don't know how to format %s in type %s"
+msgstr "Nid wyf yn gwybod sut i fformatio %s ym math %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Kenya"
-msgstr "Kenya"
+msgid "Model"
+msgstr "Model"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Japan"
-msgstr "Siapan"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
+msgstr ""
+"Ymresymiadau: (arg)\n"
+"\n"
+"Galluogi/Analluogi libsafe os yw ar y system."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Jordan"
-msgstr "Yr Iorddonen"
+msgid "Stop Server"
+msgstr "Atal y Gwasanaethwr"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Jamaica"
-msgstr "Jamaica"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
+msgstr ""
+"\n"
+"Dewis thema ar\n"
+"gyfer lilo a bootsplash,\n"
+"mae modd eu dewis\n"
+"ar wahĂąn"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Iceland"
-msgstr "Ynys yr IĂą"
+msgid "Modem"
+msgstr "Modem"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Iran"
-msgstr "Iran"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
+msgstr ""
+"Ymresymiadau: (arg, listen_tcp=None)\n"
+"\n"
+"CaniatĂĄu/Gwrthod cysylltiadau X. Ym. cyntaf pennu'r hyn sy'n digwydd\n"
+"aochr y cleient: ALL (caniatĂĄu pob cysylltiad), LOCAL (dim ond\n"
+"cysylltiadau lleol) a NONE (dim cysylltiadau)."
#: ../../lang.pm:1
#, c-format
-msgid "Iraq"
-msgstr "Irac"
+msgid "Tuvalu"
+msgstr "Tuvalu"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "British Indian Ocean Territory"
+msgid "Use auto detection"
+msgstr "Defnyddio awto ganfod"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "India"
-msgstr "India"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr ""
+"Mae GPM yn ychwanegu cefnogaeth ar gyfer llygoden i raglenni testun Linux \n"
+"megis, Midnight Commander. Mae hefyd yn caniatĂĄu gweithrediadau torri a \n"
+"gludo consol llygoden, gan gynnwys cefnogaeth ar gyfer bryslenni yn y "
+"consol. "
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Israel"
-msgstr "Israel"
+msgid "Started on boot"
+msgstr "Cychwyn y peiriant"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Ireland"
-msgstr "Iwerddon"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
+msgstr ""
+"Ymunwch Ăą'r timau cefnogi MandrakeSoft a'r Linux Community ar-lein i rannu "
+"eich gwybodaeth ac i helpu eraill drwy ddod yn Arbenigwr cydnabyddedig ar y "
+"safle cefnogaeth dechnegol."
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Indonesia"
-msgstr "Indonesia"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
+msgstr ""
+"Mae modd gosod y dewisiadau canlynol i addasu\n"
+"diogelwch eich system. Os oes arnoch esboniadau, cliciwch ar cymorth.\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hungary"
-msgstr "Hwngari"
+msgid "Automatically find available printers on remote machines"
+msgstr "Canfod argraffyddion ar gyfrifiaduron pell, yn awtomatig."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Haiti"
-msgstr "Haiti"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
+"\n"
+"- Cadw i dĂąp ar ddyfais: %s"
#: ../../lang.pm:1
#, c-format
-msgid "Croatia"
-msgstr "Croatia"
+msgid "East Timor"
+msgstr "Dwyrain Timor"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Honduras"
-msgstr "Honduras"
+msgid "Del profile..."
+msgstr "Proffl dileu"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Heard and McDonald Islands"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr ""
+"Ymresymiadau: (arg)\n"
+"\n"
+"CaniatĂĄu/Gwrthod rhestr defnyddwyr ar y system ar rheolwyr arddangos (kdm "
+"and gdm)."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hong Kong"
-msgstr "Hong Kong"
+msgid "Installing Foomatic..."
+msgstr "Gosod Foomatic..."
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "China"
-msgstr "Tsieina"
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "Allgofnodwch ac yna defnyddiwch Ctrl Alt-BackSpace"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Guyana"
-msgstr "Guyana"
+msgid "detected"
+msgstr "canfuwyd"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Guinea-Bissau"
-msgstr "Guinea-Bissau"
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr "Rhaid i'r rhwydwaith gael ei ailgychwyn. Ydych chi am ei ailgychwyn?"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Guam"
-msgstr "Guam"
+msgid "Package: "
+msgstr "Pecynnau"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Guatemala"
-msgstr "Guatemala"
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr "Methu ysgrifennu /etc/sysconfig/bootsplash."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "South Georgia and the South Sandwich Islands"
+msgid "SECURITY WARNING!"
+msgstr "RHYBUDD DIOGELWCH!"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Equatorial Guinea"
-msgstr "Equatorial Guinea"
+msgid "StarOffice"
+msgstr "StarOffice"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Guadeloupe"
-msgstr "Guadeloupe"
+msgid "No, I don't want autologin"
+msgstr "Na, tydw i ddim eisiau awto-mewngofnodi"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Guinea"
-msgstr "Guinea"
+msgid "Windows Migration tool"
+msgstr "Offeryn Trosglwyddo o Windows"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Gambia"
-msgstr "Gambia"
+msgid "All languages"
+msgstr "Pob iaith"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Greenland"
-msgstr "Greenland"
+msgid "Removing %s"
+msgstr "Tynnu %s"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Gibraltar"
-msgstr "Gibraltar"
+msgid "Testing your connection..."
+msgstr "Profi eich cysylltiad..."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Ghana"
-msgstr "Ghana"
+msgid "Cache size"
+msgstr "Maint storfa"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "French Guiana"
-msgstr "French Guiana"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
+msgstr ""
+"Mae'r cyfrinair wedi ei alluogi, ond ni argymhellir ei ddefnyddio fel "
+"cyfrifiadur rhwydwaith."
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Georgia"
-msgstr "Georgia"
+msgid "Start sector: "
+msgstr "Sector dechreuol: "
#: ../../lang.pm:1
#, c-format
-msgid "Grenada"
-msgstr "Grenada"
+msgid "Congo (Brazzaville)"
+msgstr "Congo (Brazzaville)"
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "United Kingdom"
-msgstr "Y Deyrnas Unedig"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr "Rhaid i becyn %s gael ei osod. Ydych chi am ei osod?"
#: ../../lang.pm:1
#, c-format
-msgid "Gabon"
-msgstr "Gabon"
+msgid "Seychelles"
+msgstr "Seychelles"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Faroe Islands"
-msgstr "Ynysoedd Faroe"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
+msgstr ""
+"Mae Printerdrake wedi cymharu'r enw model yn sgil yr awto ganfod gyda'r "
+"modelau sy'n cael eu rhestri yn ei gronfa ddata i gael y cydweddiad gorau. "
+"Gall y dewis fod yn anghywir, yn arbennig os nad yw eich argraffydd yn cael "
+"ei enwi yn y gronfa ddata. Felly, edrychwch i weld Ăą yw'r dewis yn gywir a "
+"chliciwch \"Model cywir\" os yw ac os nad yw, cliciwch \" Dewiswch y model "
+"gyda llaw\" fel bo modd i chi ddewis eich argraffydd gyda llaw ar y sgrĂźn "
+"nesaf.\n"
+"\n"
+"Ar gyfer eich argraffydd mae Printerdrake wedi canfod\n"
+"\n"
+"%s"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Micronesia"
-msgstr "Micronesia"
+msgid "Bad password on %s"
+msgstr "Cyfrinair gwallus yn %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Falkland Islands (Malvinas)"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
+msgstr ""
+"\n"
+"Mae un argraffydd anhysbys wedi ei gysylltu'n uniongyrchol Ăą'ch system"
#: ../../lang.pm:1
#, c-format
-msgid "Fiji"
-msgstr "Ffiji"
+msgid "Zambia"
+msgstr "Zambia"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Finland"
-msgstr "Y Ffindir"
+msgid "Security Administrator (login or email)"
+msgstr "Gweinyddwr Diogelwch (mewngfnodi neu e-bost)"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Ethiopia"
-msgstr "Ethiopia"
+msgid "Sorry, we support only 2.4 kernels."
+msgstr "Mae'n ddrwg gennym dim ond cnewyllyn 2.4 sy'n cael ei gynnal."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Spain"
-msgstr "Sbaen"
+msgid "Romanian (qwerty)"
+msgstr "Romanaidd (qwerty)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Eritrea"
-msgstr "Eritrea"
+msgid "Under Devel ... please wait."
+msgstr "O dan ddatblygiad...arhoswch."
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Western Sahara"
-msgstr "Western Sahara"
+msgid "Czech Republic"
+msgstr "Gweriniaeth Tsiec"
#: ../../lang.pm:1
#, c-format
msgid "Egypt"
msgstr "Yr Aifft"
-#: ../../lang.pm:1
-#, c-format
-msgid "Estonia"
-msgstr "Estonia"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Ecuador"
-msgstr "Ecuador"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Algeria"
-msgstr "Algeria"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Dominican Republic"
-msgstr "Dominican Republic"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Dominica"
-msgstr "Dominica"
-
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Denmark"
-msgstr "Denmarc"
+msgid "Old configuration (isdn4net)"
+msgstr "Hen ffurfweddiad (isdn4net)"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Djibouti"
-msgstr "Djibouti"
+msgid "Sound card"
+msgstr "Cerdyn sain"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Cyprus"
-msgstr "Cyprus"
+msgid "Import Fonts"
+msgstr "Mewnforio Ffontiau"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Christmas Island"
-msgstr "Christmas Island"
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+"Mae gennych un rhaniad MicroSoft Windows mawr\n"
+"Awgrymir eich bod yn newid maint y rhaniad\n"
+"(cliciwch arno, ac yna clicio \"Newid maint\"]"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Cape Verde"
-msgstr "Cape Verde"
+msgid "Suppress Temporary Files"
+msgstr "Llethu Ffeiliau Dros dro"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cuba"
-msgstr "Ciwba"
+msgid "Change partition type"
+msgstr "Newid math y rhaniad"
-#: ../../lang.pm:1
-#, c-format
-msgid "Colombia"
-msgstr "Colombia"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
+"Cydraniad\n"
+"\n"
+" Cewch ddewis yma gydraniad a dyfnder lliw rhwng y rhai sydd ar gael\n"
+"ar gyfer eich caledwedd. Dewiswch yr un sydd orau ar eich cyfer (bydd\n"
+"modd newid hynny wedi'r gosod) Mae enghraifft o ffurfweddiad i'w weld\n"
+"ar y dangosydd."
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Cameroon"
-msgstr "Cameroon"
+msgid "Network Options"
+msgstr "Dewisiadau Rhwydwaith"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Chile"
-msgstr "Chile"
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
+"Dangos thema\n"
+"yn y consol"
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Cook Islands"
-msgstr "Cook Islands"
+msgid "Statistics"
+msgstr "Ystadegau"
-#: ../../lang.pm:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Cote d'Ivoire"
-msgstr "Cote d'Ivoire"
+msgid "(on %s)"
+msgstr "(ar %s)"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Switzerland"
-msgstr "Y Swisdir"
+msgid "MM Series"
+msgstr "MM Series"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Congo (Brazzaville)"
-msgstr "Congo (Brazzaville)"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr ""
+"Llyfrgell sy'n diogelu rhag gorlif byffer ac ymosodiadau llinellau fformatio."
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Central African Republic"
-msgstr "Central African Republic"
+msgid "average"
+msgstr "cyfartaledd"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congo (Kinshasa)"
-msgstr "Congo (Kinshasa)"
+msgid "New printer name"
+msgstr "Enw'r argraffydd newydd"
#: ../../lang.pm:1
#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Cocos (Keeling) Islands"
+msgid "Equatorial Guinea"
+msgstr "Equatorial Guinea"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Canada"
-msgstr "Canada"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
+"Ymredymiadau: (arg)\n"
+"\n"
+"GaniatĂĄu/Gwrthod awtofewngofnodi."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belize"
-msgstr "Belize"
+msgid "Build Backup"
+msgstr "Adeiladu Cadw wrth Gefn"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Belarus"
-msgstr "Belarus"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
+"I argraffu ffeil o'r llinell orchymyn (ffenestr terfynnell) defnyddiwch y "
+"gorchymyn \"%s <file>\" or \"%s <file>\".\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Botswana"
-msgstr "Botswana"
+msgid "Currently, no alternative possibility is available"
+msgstr "Does dim dewis arall ar gael ar hyn o bryd"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Bouvet Island"
-msgstr "Bouvet Island"
+msgid "Romanian (qwertz)"
+msgstr "Romanaidd (qwertz)"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Bhutan"
-msgstr "Bhutan"
+msgid "Write Config"
+msgstr "Ysgrifenu ffurfweddu"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Bahamas"
-msgstr "Bahamas"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+"Mae'r daemon llwybrydd yn caniatĂĄu i'r tabl llwybrydd IP awtomatig \n"
+"ddiweddaru drwy gyfrwng y protocol RIP. Tra bo RIP'n cael ei \n"
+"ddefnyddio'n eang ar rhwydweithiau bach, mae angen protocolau \n"
+"llwybrydd mwy cymleth ar gyfer rhwydweithiwu cymleth."
#: ../../lang.pm:1
#, c-format
-msgid "Brazil"
-msgstr "Brazil"
+msgid "Kiribati"
+msgstr "Kiribati"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Bolivia"
-msgstr "Bolivia"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
+msgstr ""
+"Ymredymiadau: (arg)\n"
+"\n"
+"GaniatĂĄu/Gwrthod mewngofnodi gwraidd pell"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Brunei Darussalam"
-msgstr "Brunei Darussalam"
+msgid "Browse"
+msgstr "Pori"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Bermuda"
-msgstr "Bermuda"
+msgid "CDROM"
+msgstr "CDROM"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Benin"
-msgstr "Benin"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "Hoffech chi gysylltu Ăą'r Rhyngrwyd nawr?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Burundi"
-msgstr "Burundi"
+msgid "Belgian"
+msgstr "Belgaidd"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bahrain"
-msgstr "Bahrain"
+msgid "Do you have an ISA sound card?"
+msgstr "A oes gennych gerdyn sain ISA?"
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Bulgaria"
-msgstr "Bwlgaria"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
+msgstr ""
+"Nid oes addasydd rhwydwaith ethernet wedi ei ganfod ar eich system.\n"
+"Nid wyf yn medru gosod y math yma o gysylltiad."
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Burkina Faso"
-msgstr "Burkina Faso"
+msgid "Windows"
+msgstr "Windows"
-#: ../../lang.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Bangladesh"
-msgstr "Bangladesh"
+msgid "Can't make screenshots before partitioning"
+msgstr "Meth creu lluniau o'r sgrĂźn cyn rhannu"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Barbados"
-msgstr "Barbados"
+msgid "Host Name"
+msgstr "Enw Gwesteiwr"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Bosnia ac Herzegovina"
+msgid "/File/Save _As"
+msgstr "/Ffeil/Cawd _fel"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Azerbaijan"
-msgstr "Azerbaijan"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr ""
+"I gael mynediad at argraffyddion ar wasanaethwyr CUPS pell yn eich "
+"rhwydwaith lleol dim ond angen i chi gychwyn yr dewis \"Canfod "
+"argraffyddion ar gyfrifiaduron pell\" ; bydd y gwasanaethwyr CUPS yn dweud "
+"wrth eich cyfrifiadur am eu argraffydd. Mae pob argraffydd sy'n hysbys i'ch "
+"cyfrifiadur yn cael ei restri yn adran \"Argraffyddion pell\" prif ffenestr "
+"Printerdrake. Os yw/nad yw eich gwasanaethwr(wyr) CUPS ar eich rhwydwaith "
+"lleol rhaid rhoi cyfeiriad(au) IP ac yn ddewisol rhif(au) porth yma i gael "
+"gwybodaeth am yr argraffydd gan y gwasanaethwr(wyr)."
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Aruba"
-msgstr "Aruba"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr ""
+"Nid yw %s yng nghronfa ddata sganwyr. Hoffech chi ei ffurfweddu Ăą llaw?"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "Australia"
-msgstr "Awstralia"
+msgid "Delay before booting default image"
+msgstr "Oedi cyn cychwyn y ddelwedd rhagosodedig"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "American Samoa"
-msgstr "American Samoa"
+msgid "Restrict command line options"
+msgstr "Cyfyngu dewisiadau llinell orchymyn"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Argentina"
-msgstr "Yr Ariannin"
+msgid "East Europe"
+msgstr "Dwyrain Ewrop"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Antarctica"
-msgstr "Antarctica"
+msgid "Use free space"
+msgstr "Defnyddiwch le gwag"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Angola"
-msgstr "Angola"
+msgid "use dhcp"
+msgstr "defnyddiwch dhccp"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Netherlands Antilles"
-msgstr "Netherlands Antilles"
+msgid "Mail alert"
+msgstr "Rhybudd e-bost"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Armenia"
-msgstr "Armenia"
+msgid "Internet configuration"
+msgstr "Ffurfweddiad rhyngrwyd"
#: ../../lang.pm:1
#, c-format
-msgid "Albania"
-msgstr "Albania"
+msgid "Uzbekistan"
+msgstr "Uzbekistan"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Anguilla"
-msgstr "Anguilla"
+msgid "Detected %s"
+msgstr "Canfyddwyd %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Antigua a Barbuda"
+msgid "/Autodetect _printers"
+msgstr "/Awtoganfod_argraffydd"
-#: ../../lang.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "United Arab Emirates"
-msgstr "United Arab Emirates"
+msgid "Finish"
+msgstr "Gorffen"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Andorra"
-msgstr "Andorra"
+msgid "Show automatically selected packages"
+msgstr "Dangoswch y pecynnau dewis awtomatig"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Afghanistan"
-msgstr "Afghanistan"
+msgid "CPU flags reported by the kernel"
+msgstr "Baneri cpu'n cael eu dangos gan y cnewyllyn"
#: ../../lang.pm:1
#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
-
-#: ../../loopback.pm:1
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Gosodiadau cylch %s\n"
-
-#: ../../lvm.pm:1
-#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Tynnu'r cyfrolau rhesymegol yn gyntaf\n"
-
-#: ../../modules.pm:1
-#, c-format
-msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"Nid oes cefnodgaeth PCIMA yn bodoli bellach ar gyfer cnewyllyn 2.2. "
-"Defnyddiwch cnewyllyn 2.4"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "SYMUDWCH YR OLWYN!"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "To activate the mouse,"
-msgstr "I ysgogi'r llygoden,"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "Please test the mouse"
-msgstr "Profwch y llygoden"
+msgid "Togo"
+msgstr "Togo"
-#: ../../mouse.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "No mouse"
-msgstr "Dim llygoden"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr "Aeth rhywbeth o'i le! - ydy mkisofs wedi ei osod?"
-#: ../../mouse.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "none"
-msgstr "dim"
+msgid "16 MB"
+msgstr "16 MB"
-#: ../../mouse.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "3 buttons"
-msgstr "3 botwm"
+msgid "Please try again"
+msgstr "Ceisiwch eto"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "2 buttons"
-msgstr "2 fotwm"
+msgid "The model is correct"
+msgstr "Mae'r model yn gywir"
-#: ../../mouse.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "1 button"
-msgstr "1 botwm"
+msgid "FAT resizing failed: %s"
+msgstr "Methodd newid maint FAT: %s"
-#: ../../mouse.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "busmouse"
-msgstr "busmouse"
+msgid "Individual package selection"
+msgstr "Dewis pecynnau unigol."
-#: ../../mouse.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid "This partition is not resizeable"
+msgstr "Nid oes modd newid maint y rhaniad"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Llygoden Logitech (cyfresol, hen fath C7)"
+msgid "Location"
+msgstr "Lleoliad"
-#: ../../mouse.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid "USA (cable-hrc)"
+msgstr "UDA (cable-hrc)"
-#: ../../mouse.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "MM Series"
-msgstr "MM Series"
+msgid "Journalised FS"
+msgstr "Jwrnaleiddiwyd FS"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid "Guatemala"
+msgstr "Guatemala"
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "This machine"
+msgstr "Y peiriant hwn"
-#: ../../mouse.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "Llythyren gyrrwr DOS: %s (dim ond dyfalu)\n"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Mouse Systems"
-msgstr "Systemau Llygoden"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select the files or directories and click on 'OK'"
+msgstr "Dewiswch y ffeiliau neu gyfeiriaduron a chliciwch 'Ychwanegu'"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid "Bahrain"
+msgstr "Bahrain"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "omit scsi modules"
+msgstr "peidio cynnwys modiwlau scsi"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Llygoden 3 Botwm Generig"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr "Teulu'r cpu (ee 6 am ddosbarth i686)"
-#: ../../mouse.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Llygoden 2 Fotwm Generig"
+msgid ""
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
+msgstr ""
+"Am eich bod yn gosod eich rhwydwaith, mae eich rhwydwaith eisoes wedi ei "
+"ffurfweddu\n"
+"Cliciwch Iawn i gadw eich ffurfweddiad, neu ddileu i ail ffurfweddi eich "
+"cysylltiad Rhyngrwyd a Rhwydwaith.\n"
-#: ../../mouse.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "serial"
-msgstr "cyfresol"
+msgid "Keyboard layout: %s\n"
+msgstr "Cynllun allweddell: %s\n"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
+"Yma medrwch benderfynu a ddylai'r argraffyddion sy'n gysylltiedig Ăą'r "
+"cyfrifiadur hwn fod ar gael i gyfrifiaduron pell a pha rai."
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Wheel"
-msgstr "Olwyn"
+msgid "Maltese (US)"
+msgstr "Malteg (UDA)"
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Generic"
-msgstr "Generig"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"Yn gosod a dadosod pob System Ffeil y Rhwydwaith (NFS), SMB\n"
+"(Rheolwr Rhwydwaith/Windows), a phwyntiau gosod NCP (NetWare) ."
-#: ../../mouse.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid "Tvcard"
+msgstr "Cerdyn Teledu"
-#: ../../mouse.pm:1
-#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Toggle between normal/expert mode"
+msgstr "Arbennigwr > Cyffredinol"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Llygoden Olwyn PS Generig"
+msgid "Size"
+msgstr "Maint"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "GRUB"
+msgstr "GB"
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Standard"
-msgstr "Safonol"
+msgid "Greenland"
+msgstr "Greenland"
#: ../../mouse.pm:1
#, c-format
-msgid "Sun - Mouse"
-msgstr "Llygoden - Sun"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Newid rhwng gwastad a'r grwp wedi ei ddidoli"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Collapse Tree"
-msgstr "Cau'r goeden"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Expand Tree"
-msgstr "Estyn y goeden"
-
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Info"
-msgstr "Gwybodaeth"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Is this correct?"
-msgstr "Ydi hyn yn gywir?"
-
-#: ../../my_gtk.pm:1
-#, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Gwall wrth ysgrifennu i ffeil %s"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Bad backup file"
-msgstr "Ffeil wrth gefn gwallus"
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
-#: ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Methodd adfer o ffeil %s: %s"
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr "Nid yr label tĂąp cywir. TĂąp wedi ei labelu %s."
-#: ../../partition_table.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"Mae gennych dwll yn nhabl eich rhaniad ond nid wyf yn medru ei ddefnyddio\n"
-"Yr unig ateb yw i symud eich rhaniadau cynradd fel bo'r twll nesaf at y "
-"rhaniadau estynedig "
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Nid yw'r rhainad estynedig yncael ei gynnal ay y platfform hwn"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "mount failed: "
-msgstr "maethodd y gosodiad"
-
-#: ../../pkgs.pm:1
-#, c-format
-msgid "maybe"
-msgstr "efallai"
+"Mae gosodiad Rhannu Cysylltiad a'r Rhyngrwyd wedi ei gyflawni. \n"
+"Mae wedi ei alluogi. \n"
+"\n"
+"Beth hoffech ei wneud?"
-#: ../../pkgs.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "nice"
-msgstr "hyfryd"
+msgid "Delete All NBIs"
+msgstr "Dileu Pob NBI"
-#: ../../pkgs.pm:1
-#, c-format
-msgid "very nice"
-msgstr "hyfryd iawn"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
+msgstr ""
+"Mae'r deialog yn caniatau i chi wenud mĂąn newidiadau i'ch cychwynnwr:\n"
+"\n"
+" * \"Cychwynnydd i'w ddefnyddio\": mae gennych dri dewis:\n"
+"\n"
+" * \"GRUB\":os mae'n well gennych grub (dewislen testun)\n"
+"\n"
+" * \"LILO\" gyda dewislen raffigol\": os mae'n well gennych LILO gyda'i\n"
+"rhagwyneb graffigol.\n"
+"\n"
+" * \"LILO\" gyda dewislen raffigol\": os mae'n well gennych rhagwyneb "
+"dewislen\n"
+"testun.\n"
+"\n"
+" * \"Dyfais cychwyn\": yn y rhan fwyaf o achosion ni fyddwch yn newid\n"
+"y rhagosodedig (\"/dev/hda\"), ond os mae'n well gennych, gall y\n"
+"cychwynnydd gael ei osod ar yr ail ddisg caled (\"/dev/hdb\"), neu hyd\n"
+"yn oed ar ddisg meddal (\"/dev/fd0\")\n"
+"\n"
+" * \"Oedi cyn cychwyn y ddelwedd rhagosodedig\": wrth ail gychwyn y "
+"cyfrifiadur\n"
+"dyma'r oedi sy'n caniatĂĄu i'r defnyddiwr ddewis o fewn y ddewislen "
+"cychwynnydd,\n"
+"cychwynnydd arall yn lle'r un rhagosodedig.\n"
+"\n"
+"!!Gofalwch, os nad ydych yn gosod llwythwr cychwyn, (drwy ddewis \"Diddymu\" "
+"yma),\n"
+"rhaid i chi wneud yn siwr fod gennych fodd i gychwyn eich system Linux "
+"Mandrake.\n"
+"Hefyd, gwnewch yn siwr eich bod yn gwybod beth rydych yn ei wneud cyn newid "
+"y\n"
+"dewisiadau hyn!!\n"
+"\n"
+"Bydd clicio'r botwm \"Uwch\" yn y ddeialog yn cynnig nifer o ddewisiadau "
+"uwch,\n"
+"sydd yn cael eu cadw ar gyfer y defnyddiwr arbenigol."
-#: ../../pkgs.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "important"
-msgstr "pwysig"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
+msgstr ""
+"os wedi ei osod, anfon yr adroddiad e-bost i'r cyfeiriad e-bost neu ei anfon "
+"i'r gwraidd."
-#: ../../pkgs.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "must have"
-msgstr "rhaid cael"
+msgid "Which configuration of XFree do you want to have?"
+msgstr "Pa ffurfweddiad XFree hoffech ei gael?"
-#: ../../raid.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Dim digon o raniadau ar gyfer RAID lefel %d\n"
+msgid "More"
+msgstr "Rhagor"
-#: ../../raid.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "mkraid failed"
-msgstr "methodd mkraid"
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+"Gyda'r lefel diogelwch hwn, mae defnydd y system fel gwasanaethwr yn "
+"bosibl.\n"
+"Mae diogelwch yn ddigon uchel i ddefnyddio'r system fel gwasanaethwr sy'n "
+"derbyn\n"
+"cysylltiad gan amryw o gleientiaid. Sylwer: os maei cleient yn unig yw eich "
+"peiriant ar y Rhyngrwyd, yna mae'n well i chi ddewis lefel is."
-#: ../../raid.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "methodd mkraid (efallai bod raidtools ar goll)"
+msgid "Account Password"
+msgstr "Cyfrinair y Cyfrif"
-#: ../../raid.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Methu ychwanegu rhaniad to_formatted_RAID md%d"
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
+msgstr ""
+"Rydych wedi penderfynu gosod y cychwynnydd ar raniad.\n"
+"Mae hyn yn awgrymu bod gennych gychwynnydd ar ddisg caled eisoes: (ee System "
+"Commander).\n"
+"\n"
+"Gyda pha ddisg ydych chi'n cychwyn?"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Stop"
-msgstr "Aros"
+msgid "Tajik keyboard"
+msgstr "Bysellfwrdd Tajig"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Start"
-msgstr "Cychwyn"
+msgid ""
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
+msgstr ""
+"Mae modd i chi gopĂŻo ffurfweddiad yr argraffydd fel wnaethoch o yspwlydd %s "
+"i %s eich yspwlydd cyfredol. Bydd yr holl ddata ffurfweddi (enw argraffydd, "
+"disgrifiad, lleoliad, math o gysylltiad a gosodiadau dewis rhagosodedig) yn "
+"cael eu trosi, ond ni fydd y gwaith argraffu'n cael eu trosi.\n"
+"Ni fydd yr holl waith argraffu'n cael eu trosi, am y rhesymau canlynol:\n"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "On boot"
-msgstr "Cychwyn"
+msgid "Font List"
+msgstr "Rhestr Ffontiau"
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr "Dim gwybodaeth ychwanegol am y gwasanaeth hwn."
-
-#: ../../services.pm:1
-#, c-format
-msgid "Services and deamons"
-msgstr "Gwasanaethau a daemonau"
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
+msgstr ""
+"Efallai bydd angen i chi newid eich dyfais cychwyn Open Firmware\n"
+" i alluogi'r cychwynnydd. Os nad ydych yn gweld anogwr y\n"
+" cychwynnydd wrth ail gychwyn, gwasgwch Command-Option-O-F wrth ail\n"
+" gychwyn a theipiwch: setenv boot-device %s,\\\\:tbxi\n"
+" Yna teipiwch: shut-down\n"
+"Wrth gychwyn eto dylech weld anogwr y cychwynnydd."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "stopped"
-msgstr "ataliwyd"
+msgid ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
+msgstr ""
+"Mae'n ymddangos fod gennychbeiriant OldWorld\n"
+"neu Anhysbys ac ni fydd cychwynydd yaboot\n"
+"yn gweithio ar eich cyfer\n"
+"Bydd y gosodiad yn parhau ond bydd\n"
+"rhaid defnyddio BootX i gychwyn\n"
+"eich peiriant."
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "running"
-msgstr "rhedeg"
+msgid "Select file"
+msgstr "Dewiswch ffeil"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose which services should be automatically started at boot time"
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
msgstr ""
-"Dewiswch pa wasanaethau ddylai gael eu cychwyn yn awtomatig wrth gychwyn y "
-"cyfrifiadur"
-
-#: ../../services.pm:1
-#, c-format
-msgid "Database Server"
-msgstr "Gwasanaethwr Cronfa Ddata"
+"Dewis y rhwydwaith neu westeiwr ddylai'r argraffyddion lleol fod ar gael "
+"iddynt:"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote Administration"
-msgstr "Gweinyddu Pell"
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr ""
+"Mae modd defnyddio'r gorchmynion hyn ym maes \"Gorchmynion Argraffu\" y "
+"deialogau argraffu mewn nifer o raglenni, ond yma nid ydynt yn darparu'r "
+"enw ffeil am fod y ffeil i'r argraffydd yn cael ei ddarparu gan y rhaglen.\n"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "File sharing"
-msgstr "Rhannu Ffeiliau"
+msgid "Japan"
+msgstr "Siapan"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet"
-msgstr "Rhyngrwyd"
+msgid "Print option list"
+msgstr "Rhestr ddewis argraffu"
-#: ../../services.pm:1
+#: ../../standalone/localedrake:1
#, c-format
-msgid "Printing"
-msgstr "Argraffu"
+msgid "The change is done, but to be effective you must logout"
+msgstr ""
+"Mae'r newid wedi ei gyflawni, ond i fod yn effeithiol mae'n rhaid i chi "
+"allgofnodi"
-#: ../../services.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Yn cychwyn Gwasanaethwr Ffont X (mae hyn yn orfodol i XFree i redeg).."
+msgid "Search servers"
+msgstr "Chwiliwch am wasanaethwyr"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Llwytho'r gyrrwyr ar gyfer eich dyfeisiau usb."
+msgid "NCP queue name missing!"
+msgstr "Mae enw rhes NCP ar goll"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
+"Warning, another internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"Syslog yw'r modd mae llawer o daemonau'n defnyddio i gofnodi \n"
-"negeseuon i ffeiliau cofnod systemau. mae'n syniad da io rhedeg \n"
-"syslog bob tro."
+"Rhybudd, mae cysylltiad arall gyda'r rhyngrwyd wedi ei ganfod, efallai'n "
+"defnyddio eich rhwydwaith."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Cychwyn y system sain ar eich peiriant"
+msgid "Cd-Rom labeled \"%s\""
+msgstr "Cd-Rom wedi ei labelu \"%s\""
#: ../../services.pm:1
#, c-format
msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
msgstr ""
-"Mae'r protocol rwho'n caniatĂĄu i ddefnyddwyr pell gael rhestr o'r \n"
-"holl ddefnyddwyr sydd wedi mewngofnodi ar beiriant sy'n rhedeg \n"
-"daemon rwho (yn debyg i fysedd)."
+"Bydd yn cadw ac adfer system pwll entropi ar gyfer cynhyrchu rhif \n"
+"hap o ansawdd uchel."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
msgstr ""
-"Mae protocol ruser yn caniatĂĄu i ddefnyddwyr ar rwydwaith i adnabod\n"
-"pwy arall sydd wedi mewngofnodi ar beirianau eraill sy'n ymateb."
+"Wedi methu gwirio system ffeiliau %s. Hoffech chi drwsio'r gwallau? (gofal, "
+"mae modd colli data)"
-#: ../../services.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Mae'r protocol rstat yn caniatĂĄu i ddefnyddwyr rhwydwaith \n"
-"i adennill metric perfformaid unrhyw beiriant ar y rhwydwaith."
+msgid "Turn your computer into a reliable server"
+msgstr "Trowch eich peiriant i fod yn wasanaethwr dibynadwy"
-#: ../../services.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Mae'r daemon llwybrydd yn caniatĂĄu i'r tabl llwybrydd IP awtomatig \n"
-"ddiweddaru drwy gyfrwng y protocol RIP. Tra bo RIP'n cael ei \n"
-"ddefnyddio'n eang ar rhwydweithiau bach, mae angen protocolau \n"
-"llwybrydd mwy cymleth ar gyfer rhwydweithiwu cymleth."
+msgid " (driver %s)"
+msgstr " (gyrrwr %s)"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
+"Loopback file(s):\n"
+" %s\n"
msgstr ""
-"Dynodi dyfeisiau bras i ddyfeisiau bloc (megis dig caled rhaniadau), \n"
-"ar gyfer defnydd rhaglenni megis Oracle neu chwaraewyr DVD."
+"Ffeil(iau) Cylch-ĂŽl:\n"
+" %s\n"
-#: ../../services.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Bydd yn cadw ac adfer system pwll entropi ar gyfer cynhyrchu rhif \n"
-"hap o ansawdd uchel."
+msgid "I don't know"
+msgstr "Dim syniad"
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Mae Postfix yn Asiant Cludo E-bost (MTA), sef rhaglen sy'nsymud e-bost o un "
-"peiriant i'r llall."
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr ", gwesteiwr TCP/IP \"%s\", porth %s"
-#: ../../services.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
msgstr ""
-"Mae'r mapiwr porth (portmapper) yn rheoli cysylltiadau RPC, \n"
-"sy'n cael eu defnyddio gan brotocolau fel NFS a NIS. Rhaid i wasanaethwr "
-"porthmap\n"
-"redeg ar beiriannau sy'n gweithredu fel gwasanaethwyr ar gyfer protocolau "
-"sy'n\n"
-"gwneud defnydd o fecanwaith RPC."
+"Rydych ar fin ffurfweddu disg meddal Gosod Awtomatig. Mae'r nodwedd hwn "
+"braidd yn beryglus a dylid ei ddefnyddio gyda gofal.\n"
+"\n"
+"Gyda'r hodwedd hwn, bydd modd ailchwarau'r gosodiad ar y cyfrifiadur, gan "
+"eich holi'n rhyngweithiol ar gyfer rhai cammau, er mwyn newid eu "
+"gwerthoedd.\n"
+"\n"
+"Ydych chi eisiau parhau?\n"
+"?"
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
msgstr ""
-"Mae cynhaliaeth PCMICA fel rheol ar gyfer cynnal pethau fel \n"
-"ethernet a modem mewn gliniadur. Ni fydd yn cychwyn heb ei \n"
-"ffurfweddu i wneud hynny, felly mae'n ddiogel ei gael ar beiriannau \n"
-"sydd ddim ei angen."
-
-#: ../../services.pm:1
-#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Cynnal OKI 4w ac argraffyddion windows cyffelyb."
+"\n"
+"\n"
+"Mae eich cerdyn yn defnyddio'r gyrrwr %s\"%s\" ar hyn o bryd ( y gyrrwr "
+"arferol ar ei gyfer yw \"%s\")"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Cychwyn clo allweddell numlock yn awtomatig yn consol \n"
-"ac XFree wrth gychwyn y peiriant."
+msgid "Post Uninstall"
+msgstr "Wedi'r dad osod"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"Mae NFS yn brotocol poblogaidd ar gyfer rhannu ffeiliau \n"
-"ar draws rhwydweithiau TCP/IP. Mae'r gwasanaeth hwn \n"
-"yn darparu'r gallu i gloi ffeiliau NFS."
+msgid " ("
+msgstr " ("
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"Mae NFS yn brotocol poblogaidd ar gyfer rhannu ffeiliau ar draws "
-"rhwydweithiau TCP/IP.\n"
-"Mae'r gwasanaeth yn darparu ffwythiannaeth gwasanaethwr NFS, sy;n cael ei "
-"ffurfweddu\n"
-"drwy'r ffeil /etc/exports."
+msgid "Cpuid level"
+msgstr "Lefel cpuid"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Cychwyn/Gorffen pob rhyngwyneb rhwydwaith sydd wedi eu \n"
-"ffurfweddu i gychwyn wrth gychwyn y peiriant."
+msgid "Mongolian (cyrillic)"
+msgstr "Mongoleg (cyrillic)"
-#: ../../services.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Yn gosod a dadosod pob System Ffeil y Rhwydwaith (NFS), SMB\n"
-"(Rheolwr Rhwydwaith/Windows), a phwyntiau gosod NCP (NetWare) ."
+msgid "Add a module"
+msgstr "Ychwanegu modiwl"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"mae'r enwyd (BIND) yn Wasanaethwr Enw Parth (DNS) sy'n cael ei ddefnyddio i "
-"gydrannu enwau gwestai i'r cyfeiriadau IP."
+msgid "Profile to delete:"
+msgstr "Proffil i'w ddileu:"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Mae Gwasanaethwr Rhith Linux yn cael ei ddefnyddio i adeiladu \n"
-"gwasanaethwyr cyflym a chyraeddadwy."
+msgid "Local measure"
+msgstr "Mesur lleol"
-#: ../../services.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"Mae lpd yn ddaemon argraffu sy'n angenrheidiol i lpr weithio\n"
-"Mae'n wasanaethwr sy'n cyflafareddu gwaith argraffu i\n"
-"argraffydd (ion)."
+msgid "busmouse"
+msgstr "busmouse"
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr "Bydd Linuxconf yn trefnu ar adegau i gyflawnu amrywiol"
+msgid "Account Login (user name)"
+msgstr "Mewngofnod Cyfrif (enw defnyddiwr)"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Canfod a ffurfweddu awtomatic caledwedd wrth gychwyn y cyfrifiadur."
+msgid "Fdiv bug"
+msgstr "Gwall Fdiv"
-#: ../../services.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
msgstr ""
-"Ailgreu awtomatic pennawd y cnewyllyn yn /boot ar\n"
-"gyfer /usr/include/linux{autoconf,version}.h"
+"Ffurfweddwr Drakfirewall\n"
+"\n"
+"Gwnewch yn siwr eich bod wedi ffurfweddu eich mynediad\n"
+"Rhwydwaith/Rhyngrwyd gyda Drakconnect cyn mynd ymhellach."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Mae'r pecyn hwn yn llwytho'r map bysellfwrdd rydych wedi \n"
-"ei ddewis fel yn /etc/sysconfig/keyboard. Mae modd dewis \n"
-"hwn wrth ddefnyddio'r rhaglen wasanaethu kbdconfig. \n"
-"Dylech adael hwn wedi ei alluogi ar gyfer y rhanfwyaf o beiriannau."
+msgid "Benin"
+msgstr "Benin"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Cychwyn hidlydd pecynnau ar gyfer cnewyllyn cyfres Linux 2.2 \n"
-"i greu mur gwarchod i amddiffyn eich peiriant rhag ymosodiadau \n"
-"o'r rhwydwaith."
+msgid "Uruguay"
+msgstr "Uruguay"
-#: ../../services.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Mae daemon uwchwasanaethwr rhyngrwyd (inetd) yn cychwyn nifer\n"
-"o wasanaethau rhyngrwyd eraill, yn ĂŽl y galw. Mae'n gyfrifol am gychwyn\n"
-"nifer o wasanaethau, gan gynnwys telnet, ftp, rsh a rlogin. Mae analluogi \n"
-"inetd yn analluogi'r holl wasanaethau mae'n gyfrifol amdanynt."
+msgid "Path selection"
+msgstr "Dewis llwybr"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Mae Apache yn wasanaethwr y We Fyd Eang. Mae'n cael ei ddefnyddio "
-"iwasanaethu ffeiliau HTML a CGI."
+msgid "Name/IP address of host:"
+msgstr "Enw/cyfeiriad IP gwesteiwr"
-#: ../../services.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"Mae HardDrake yn rhedeg archwiliwr caledwedd, a gall yn ĂŽl \n"
-"eich dewis, ffurfweddu caledwedd newydd neu sydd wedi newid."
+msgid "Monitor: %s\n"
+msgstr "Monitor: %s\n"
-#: ../../services.pm:1
+#: ../../partition_table/raw.pm:1
#, c-format
msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
msgstr ""
-"Mae GPM yn ychwanegu cefnogaeth ar gyfer llygoden i raglenni testun Linux \n"
-"megis, Midnight Commander. Mae hefyd yn caniatĂĄu gweithrediadau torri a \n"
-"gludo consol llygoden, gan gynnwys cefnogaeth ar gyfer bryslenni yn y "
-"consol. "
+"Mae rhywbeth gwael yn digwydd ar eich disg.\n"
+"Mae prawf i fesur ei gyfanrwydd wedi methu. \n"
+"Nid oes gwerth ysgrifennu i'r ddisg"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Mae cron yn rhaglen safonnol yn UNIX sy'n rhedeg rhaglenni sydd wedi eu \n"
-"pennu gan y defnyddiwr ar adegau penodol. Mae vixie cron yn ychwanegu \n"
-"nifer o ychwanegiadau i'r UNIX cron sylfaenol, yn cynnwys gwell diogelwch \n"
-"a dewisiadau ffurfweddu mwy pwerus."
+msgid "Printer host name or IP missing!"
+msgstr "Mae enw'r gwesteiwr argraffu neu IP ar goll!"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Mae'n rhedeg gorchmynion wedi eu trefnu gan y gorchymyn at ar amser wedi \n"
-"ei bennu pan oedd at yn rhedeg, gan rhedeg gorchmynion swp pan fydd \n"
-"cyfartaledd y llwyth yn ddigon isel."
+msgid "Please check all users that you want to include in your backup."
+msgstr "Gwiriwch pob defnyddiwr rydych am eu cynnwys yn eich cadw wrth gefn."
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
msgstr ""
-"Mae apmd yn cael ei ddefnyddio i fonitro statws y batri a mewngofnodi drwy\n"
-"syslog. Mae modd ei ddefnyddio i gau'r peiriant pan mae'r batri'n isel."
-
-#: ../../services.pm:1
-#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron trefnydd gorchymyn cyfnodol"
+"Rhaid i %s gael ei ffurfweddu gan printerdrake.\n"
+"Medrwch gychwyn printerdrake o adran Galedwedd Canolfan Rheoli Mandrake"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Cychwynnwch system sain ALSA (PensaernĂŻaeth Sain Linux Uwch)"
+msgid "Bangladesh"
+msgstr "Bangladesh"
-#: ../../standalone.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Installing packages..."
-msgstr "Gosod pecynnau..."
+msgid "Japan (cable)"
+msgstr "Siapan (cable)"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
"\n"
-"Defnydd: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+"Croeso i'r Dewin Gosod Argraffydd\n"
+"\n"
+"Bydd y dewin yn eich cynorthwyo i osod argraffydd(ion) sydd wedi eu cysylltu "
+"Ăą'r cyfrifiadur hwn,yn gysylltiedig Ăą'r rhwydwaith neu i beiriant Windows "
+"pell.\n"
+"\n"
+"Os oes gennych argraffydd(ion) yn gysylltiedig Ăą'r peiriant, cysylltwch nhw "
+"Ăą'r peiriant a'u troi nhw mlaen fel bod modd awtoganfod. Hefyd rhaid i "
+"argraffydd(ion) rhwydwaith a'ch peiriannau Windows fod wedi eu cysylltu ac "
+"ymlaen.\n"
+"\n"
+"Sylwer bod awtoganfod argraffyddion ar rwydwaith yn cymryd mwy o amser nag "
+"awtoganfod argraffyddion sy'n gysylltiedig Ăą'r peiriant hwn. Felly, "
+"diffoddwch awto ganfod rhwydwaith pan nad oes mo'i angen.\n"
+"\n"
+"Cliciwch \"Nesaf\" pan ydych yn barod, a \"Diddymu\" os nad ydych am osod "
+"eich argraffydd(ion) ar hyn o bryd."
-#: ../../standalone.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
-msgstr ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" cydraniad XFdrake"
+msgid "Initial tests"
+msgstr "Prawf Init"
-#: ../../standalone.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+msgid "Continue"
+msgstr "Parhau"
-#: ../../standalone.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
+msgid "Custom Restore"
+msgstr "Adfer Dewisol"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
msgstr ""
-"[DEWIS]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+"\"Cerdyn sain\": os yw cerdyn sain yn cael ei ganfod ar eich cyfrifiadur, "
+"bydd \n"
+"yn cael ei ddangos yma. Os ydych yn sylwi nad y cerdyn sain sydd ar eich\n"
+"cyfrifiadur sy'n cael ei ddangos, yna cliciwch ar y botwm a dewis\n"
+" gyrrwr arall."
-#: ../../standalone.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "Script-based"
+msgstr "Seiliedig ar sgript"
-#: ../../standalone.pm:1
+#: ../../install_any.pm:1 ../../partition_table.pm:1
#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
-msgstr ""
-"[OPTIONS]\n"
-"Rhaglen Cyswllt a Monitro'r Rhwydwaith a'r Rhyngrwyd\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
+msgid "Error reading file %s"
+msgstr "Gwall wrth ddarllen ffeil %s"
-#: ../../standalone.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgid "PLL setting:"
+msgstr "Gosodiad PLL:"
-#: ../../standalone.pm:1
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
#, c-format
-msgid "[keyboard]"
-msgstr "[bysellfwrdd]"
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "Rhaid bod gennych raniad FAT wedi ei osod yn /boot/efi"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
-msgstr ""
-"[DEWISIADAU]...\n"
-"Ffurfweddwr Gwasanaethwr Terfynell Mandrake\n"
-"--enable : galluogi MTS\n"
-"--disable : analluogi MTS\n"
-"--start : cychwyn MTS\n"
-"--stop : atal MTS\n"
-"--adduser : ychwanegu defnyddiwr system presennol i MTS (angen enw "
-"defnyddiwr)\n"
-"--deluser : dileu defnyddiwr system presennol o MTS (angen enw "
-"defnyddiwr)\n"
-"--addclient : ychwanegu peiriant cleient i MTS (angen cyfeiriad MAC, "
-"IP, enw delwedd nbi)\n"
-"--delclient : dileu peiriant cleient i MTS (angen cyfeiriad MAC, IP, "
-"enw delwedd nbi)"
+msgid " on "
+msgstr "ar "
-#: ../../standalone.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
-msgstr ""
-"Rhaglen mewnforio a monitro "
-"ffontiau \n"
-"--windows_import : mewnforio o bob rhaniad windows.\n"
-"--xls_fonts : dangos pob ffont sy'n bodoli o xls\n"
-"--strong : cadarnhad cryf o ffont.\n"
-"--install : derbyn unrhyw ffeil ffont ac unrhyw gyfeiriadur.\n"
-"--uninstall : dadosod unrhyw ffont neu gyfeiriadur ffont.\n"
-"--replace : amnewid pob ffont os yw'n bod\n"
-"--application : 0 dim rhaglen.\n"
-" : 1 pob rhaglen ar gael yn cael ei gynnal.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
+msgid "The URL must begin with http:// or https://"
+msgstr "Rhaid i'r URL gychwyn gyda http:// neu https://"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
msgstr ""
-"[DEWISIADAU] [ENW_RHAGLEN]\n"
-"\n"
-"DEWISIADAU:\n"
-" --help - argraffu'r neges cymorth.\n"
-" --report - dylai'r rhaglen fod yn un o offer mandrake\n"
-" --incident - ylai'r rhaglen fod yn un o offer mandrake"
+"Medrwch enwi'n benodol URI i gael mynediad i'r argraffydd. Rhaid i'r URI "
+"gyflawni manylyn un ai CUPS neu Foomatic. Sylwer nad yw pob math o URI cyn "
+"cael eu cynnal gan bob sbwlydd ."
+
+#: ../../any.pm:1
+#, c-format
+msgid "Other OS (SunOS...)"
+msgstr "Systwmau Gweithredu eraill (SunOS..)"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Install/Upgrade"
+msgstr "Gosod/Diweddaru"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "%d packages"
+msgstr "%d pecyn"
#: ../../standalone.pm:1
#, c-format
@@ -7385,4880 +6890,5314 @@ msgstr ""
"--help : show this message.\n"
"--version : show version number.\n"
-#: ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Domain Authentication Required"
+msgstr "Angen Dilysu Parth"
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
msgstr ""
-"Mae'r rhaglen hon yn feddalwedd rhydd; medrwch ei ailddosbarthu\n"
-"a/neu ei newid o dan amodau Trwydded Gyhoeddus Gyffredinol GNU\n"
-"fel sydd wedi ei gyhoeddi gan y Free Software Foundation; un ai fersiwn\n"
-"2 neu (yn ĂŽl eich dewis) unrhyw fersiwn diweddarach.\n"
"\n"
-" Mae'r rhaglen yn cael ei ddosbarthu yn y gobaith y bydd yn ddefnyddiol,\n"
-" ond HEB UNRHYW WARANT; heb hyd yn oed awgrym o warant o\n"
-" FASNACHEIDDRWYDD nag ADDASRWYDD AR GYFER PWRPAS\n"
-" PENODOL. Gweler Trwydded Gyhoeddus Gyffredinol GNU am fwy o\n"
-" wybodaeth.\n"
"\n"
-" Dylech fod wedi derbyn copi o Drwydded Gyhoeddus Gyffredinol GNU\n"
-" gyda'r rhaglen; os nad, ysgrifennwch at:\n"
-" Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,\n"
-"MA 02111-1307, USA\n"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Exit install"
-msgstr "Gorffen"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Install updates"
-msgstr "Diweddariadau"
+" Diolch:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
-#: ../../steps.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Configure services"
-msgstr "Ffurfweddu gwasanaethau"
+msgid "Costa Rica"
+msgstr "Costa Rica"
-#: ../../steps.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Configure X"
-msgstr "Ffurfweddu X"
+msgid "Use libsafe for servers"
+msgstr "Defnyddiwch libsafe ar gyfer gwasanaethwyr"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Install bootloader"
-msgstr "Gosod cychwynnwr"
+msgid "Icelandic"
+msgstr "Eislandaidd"
-#: ../../steps.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Configure networking"
-msgstr "Ffurfweddu rhwydwaith"
+msgid ""
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
+"\n"
+"Defnydd: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
-#: ../../steps.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Add a user"
-msgstr "Ychwanegu defnyddiwr"
+msgid "Please relog into %s to activate the changes"
+msgstr "Ail fewn gofnodwch i %s i wireddu'r newidiadau"
-#: ../../steps.pm:1
+#: ../../my_gtk.pm:1
#, c-format
-msgid "Root password"
-msgstr "Cyfrinair gwraidd"
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-#: ../../steps.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Install system"
-msgstr "Gosod y system"
+msgid "Lilo/grub mode"
+msgstr "Modd Lilo/grub"
-#: ../../steps.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Choose packages to install"
-msgstr "Dewis pecynnau i'w gosod"
+msgid "Output"
+msgstr "Allbwn"
-#: ../../steps.pm:1
+#: ../../loopback.pm:1
#, c-format
-msgid "Format partitions"
-msgstr "Fformatio rhaniadau"
+msgid "Circular mounts %s\n"
+msgstr "Gosodiadau cylch %s\n"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Partitioning"
-msgstr "Creu Rhanniadau"
+msgid "Martinique"
+msgstr "Martinique"
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose your keyboard"
-msgstr "Dewis eich bysellfwrdd"
+msgid "HardDrive / NFS"
+msgstr "Disg Caled / NFS"
-#: ../../steps.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Select installation class"
-msgstr "Dewis dosbarth gosod"
+msgid "a number"
+msgstr "rhif"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Hard drive detection"
-msgstr "Canfod disg caled"
+msgid "Swedish"
+msgstr "Swedaidd"
-#: ../../steps.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Configure mouse"
-msgstr "Ffurfweddu llygoden"
+msgid "Which %s driver should I try?"
+msgstr "Pa yrrwr %s ddylwn drio?"
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "License"
-msgstr "Trwydded"
+msgid ""
+"You will receive an alert if one of the selected services is no longer "
+"running"
+msgstr "Byddwch yn derbyn rhybudd os na fydd un o'r gwasanaethu hyn yn rhedeg"
-#: ../../steps.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Language"
-msgstr "Iaith"
+msgid "Filesystem types:"
+msgstr "Mathau o system ffeiliau:"
-#: ../../ugtk2.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "utopia 25"
-msgstr "utopia 25"
+msgid ", multi-function device on HP JetDirect"
+msgstr ", dyfais amlbwrpas ar HP JetDirect"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "OK"
-msgstr "Iawn"
+msgid "Northern Mariana Islands"
+msgstr "Northern Mariana Islands"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "logdrake"
-msgstr "logdrake"
+msgid "none"
+msgstr "dim"
-#: ../../ugtk.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgid "user :"
+msgstr "defnyddiwr :"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (gyrrwr gosod dangoswr)"
+msgid "Please enter your password"
+msgstr "Rhowch eich cyfrinair"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Mae modd i'ch cerdyn gael cefnogaeth cyflymu caledwedd 3D gyda XFree %s \n"
-"SYLWER CEFNOGAETH ARBROFOL YW HWN AC FE ALL RHEWI EICH CYFRIFIADUR."
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s gyda cyflymu caledwedd 3D ARBROFOL"
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
msgstr ""
-"Mae modd i'ch cerdyn gael cefnogaeth cyflymu caledwedd 3D gyda XFree %s"
+"Enw'r proffil i'w greu ( mae'r proffil newydd yn cael ei greu fel copi o'r "
+"un cyfredol):"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s gyda cyflymu caledwedd 3D"
+msgid "Floppy"
+msgstr "Disg Meddal"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Mae eich cerdyn yn medru cael cefnogaeth cyflymu caledwedd 3D ond dim ond "
-"gyda XFree %s.\n"
-"SYLWER CEFNOGAETH ARBROFOL YW HWN AC FE ALL RHEWI EICH CYFRIFIADUR.\n"
-"Mae eich cerdyn yn cael ei gynnal gan XFree %s efallai bod gwell cefnogaeth "
-"mewn 2D."
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "Gwiriwch os ydych am ddileu eich cyfrwng RW(Sesiwn 1af)"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Mae eich cerdyn yn medru cael cefnogaeth cyflymu caledwedd 3D ond dim ond "
-"gyda XFree %s.\n"
-"Mae eich cerdyn yn cael ei gynnal gan XFree %s efallai bod gwell cefnogaeth "
-"mewn 2D."
+msgid "Ghostscript referencing"
+msgstr "cyfeirio Ghostscript"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "XFree %s"
-msgstr "XFree: %s"
+msgid "Bootloader"
+msgstr "Cychwynydd ar waith"
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Ffurfweddu cerdyn \"%s\" %s yn unig"
+msgid "Move"
+msgstr "Symud"
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Use Xinerama extension"
-msgstr "Defnyddiwch estyniad Xinerama"
+msgid "Bootloader to use"
+msgstr "Bootloader ar waith"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configure all heads independently"
-msgstr "Ffurfweddu pob pen yn annibynnol"
+msgid "SMB server host"
+msgstr "Gwasanaethwr gwesteiwr SMB"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Pa ffurfweddiad XFree hoffech ei gael?"
+msgid "Name Servers:"
+msgstr "Enwi Gwasanaethwr:"
-#: ../../Xconfig/card.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "XFree configuration"
-msgstr "Ffurfweddiad XFree"
+msgid ""
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
+msgstr ""
+"\n"
+" Rhybudd\n"
+"\n"
+"Darllenwch yr amodau isod yn ofalus. Os ydych yn anghytuno gydag unrhyw\n"
+" ddarn, nid oes caniatĂąd i chi osod y cyfrwng CD nesaf. Pwyswch 'Gwrthod' i\n"
+" barhau'r gosodiad heb ddefnyddio'r cyfryngau hyn.\n"
+"\n"
+"Nid yw rhai cydrannau ar y CDau canlynol yn cael eu rheoli gan Drwydded GPL\n"
+" neu gytundebau tebyg. Mae'r cydrannau hynny'n cael eu rheoli gan dermau ac\n"
+" amodau ei drwydded benodol ei hun. Darllenwch yn ofalus a chadwch at y\n"
+" trwyddedau penodol cyn defnyddio neu ddosbarthu'r cydrannau hynny.\n"
+"\n"
+"Mae'r trwyddedau hynny'n atal yn gyffredinol, drosglwyddiad, dyblygu (ar "
+"wahĂąn i\n"
+" bwrpas cadw wrth gefn), dosbarthu, cildroi peirianyddol, dadcydosod,\n"
+" dadgrynhoi neu newid y cydrannau. Bydd unrhyw dorri ar yr amodau hyn yn\n"
+"terfynu eich hawl o dan y drwydded benodol. Oni bai ei fod yn rhoi'r hawl i "
+"chi,\n"
+"nid oes modd i chi osod y rhaglenni ar fwy nag un system na'i addasu ar "
+"gyfer\n"
+" defnydd ar rwydwaith. Os oes amheuaeth, cysylltwch yn uniongyrchol Ăą\n"
+"dosbarthwr neu olygydd y cydrannau hynny.\n"
+"Mae trosglwyddo i drydydd parti neu gopĂŻo'r cydrannau hynny gan gynnwys y\n"
+" ddogfennaeth, wedi ei wahardd fel rheol\n"
+"\n"
+"Mae pob hawl i gydrannau'r cyfrwng CD nesaf yn perthyn i' hawduron "
+"perthnasol\n"
+" ac maent wedi eu hamddiffyn drwy gyfreithiau eiddo deallusol a hawlfraint "
+"sy'n\n"
+" berthynol i raglenni meddalwedd.\n"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Dewiswch faint y cof eich cerdyn graffeg"
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Tynnwch yr argraffydd hwn o Star Office/OpenOffice.org/GIMP"
-#: ../../Xconfig/card.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
msgstr ""
-"Mae eich system yn cynnal ffurfweddiad amlben.\n"
-"Beth hoffech ei wneud?"
+"Mae Gwasanaethwr Rhith Linux yn cael ei ddefnyddio i adeiladu \n"
+"gwasanaethwyr cyflym a chyraeddadwy."
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Multi-head configuration"
-msgstr "Ffurfweddiad amlben"
+msgid "4 billion colors (32 bits)"
+msgstr "4 biliwn o liwiau (32 did)"
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose an X server"
-msgstr "Dewiswch wasanaethwr X"
+msgid "Micronesia"
+msgstr "Micronesia"
-#: ../../Xconfig/card.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "X server"
-msgstr "Gwasanaethwr X"
+msgid "License"
+msgstr "Trwydded"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "64 MB or more"
-msgstr "16 MB neu fwy"
+msgid "This may take a moment to generate the keys."
+msgstr "Bydd hyn yn cymryd amser i gynhyrchu'r allweddi"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "32 MB"
-msgstr "32 MB"
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgstr "Awtoganfod argraffydd (Argraffyddion lleol, TCP/Socket, ac SMB)"
-#: ../../Xconfig/card.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "16 MB"
-msgstr "16 MB"
+msgid "Sagem (using pppoa) usb"
+msgstr "USB Sagem (defnyddio pppoa)"
-#: ../../Xconfig/card.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "8 MB"
-msgstr "8 MB"
+msgid ""
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
+msgstr ""
+"Digwyddodd gwall - ni chanfyddwyd dyfeisiau dilys i greu systemau ffeil "
+"arnynt. Gwiriwch eich caledwedd am ffynhonnell yr anhawster."
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "4 MB"
-msgstr "4 MB"
+msgid "Starting the printing system at boot time"
+msgstr "Cychwyn y system argraffu wrth gychwyn y cyfrifiadur"
-#: ../../Xconfig/card.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "2 MB"
-msgstr "2 MB"
+msgid "Do you want to start the connection at boot?"
+msgstr "Ydych chi eisiau agor y cysylltiad wrth gychwyn y cyfrifiadur?"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "1 MB"
-msgstr "1 MB"
+msgid "Processor ID"
+msgstr "Dynodiad Prosesydd"
-#: ../../Xconfig/card.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "512 kB"
-msgstr "512 kB"
+msgid "Sound trouble shooting"
+msgstr "Datrys problemau sain"
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "256 kB"
-msgstr "256 kB"
+msgid "Polish (qwerty layout)"
+msgstr "Pwylaidd (gosodiad qwerty)"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "activate now"
+msgstr "cychwyn nawr"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
"\n"
-"%s"
+"Drakbackup activities via CD:\n"
+"\n"
msgstr ""
-"Cadw'r newid?\n"
-"Y ffurfweddiad presenol yw:\n"
"\n"
-"%s"
+"Gweithgaredd Drakbackup drwy CD:\n"
+"\n"
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Options"
-msgstr "Dewisiadau"
+msgid ""
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
+msgstr ""
+"Rydych ar fin gosod system argraffu %s ar system sy'n rhedeg lefel diogelwch "
+"%s. \n"
+"\n"
+"Mae'r system yn rhedeg daemon (proses gefndirol) sy'n aros am waith argraffu "
+"ac yna yn eu trin. Mae'r daemon hefyd yn gyraeddadwy gan beiriannau pell "
+"drwy'r rhwydwaith ac felly'n bwynt ymosod. Felly, dim ond ychydig o "
+"ddaemonau sy'n cael eu cychwyn yn rhagosodedig, ar y lefel diogelwch hwn.\n"
+"\n"
+"Ydych chi wir eisiau ffurfweddu argraffu ar y peiriant hwn?"
-#: ../../Xconfig/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Test"
-msgstr "Prawf"
+msgid "Host \"%s\", port %s"
+msgstr ",Gwesteiwr \"%s\", porth %s"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Resolution"
-msgstr "Cydraniad"
+msgid "This partition can't be used for loopback"
+msgstr "Niid oes modd defnyddio'r rhaniad ar gyfer cylch-ĂŽl"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Monitor"
-msgstr "Monitor"
+msgid "File already exists. Use it?"
+msgstr "Mae'r ffeil yn bodoli eisoes. Defnyddiwch hwn?"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Graphic Card"
-msgstr "Cerdyn Graffeg"
+msgid "received: "
+msgstr "derbyniwyd:"
-#: ../../Xconfig/monitor.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Vertical refresh rate"
-msgstr "Graddfa adfywio fertigol"
+msgid "Right Alt key"
+msgstr "Bysell Alt dde"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Graddfa adfywio llorweddol"
+msgid "the list of alternative drivers for this sound card"
+msgstr "rhestr o yrrwr eraill ar gyfer eich cerdyn sain"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Y ddau baramedr pwysig yw'r raddfa adnewyddu fertigol, sef y raddfa mae'r\n"
-"holl sgrĂźn yn cael ei adnewyddu, ac yn fwyaf pwysig y raddfa cydamseru\n"
-"llorweddol, sef y raddfa mae'r llinellau sganio'n cael eu dangos.\n"
-"\n"
-"Mae'n BWYSIG IAWN nad ydych yn enwi monitor gyda graddfa cydamseru\n"
-"sydd tu hwnt i allu eich monitor: mae modd difrodi eich monitor drwy wneud "
-"hynny.\n"
-"Os oes gennych amheuaeth, dewiswch raddfa is."
+msgid "Gateway"
+msgstr "Mynedfa"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr "Methodd ymholiad Plug'nPlay. Dewiswch y dangosydd cywir"
+msgid "Scanner sharing"
+msgstr "Rhannu sganiwr"
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Vendor"
-msgstr "Gwerthwr"
+msgid "Tonga"
+msgstr "Tonga"
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Plug'n Play"
-msgstr "Plug'n Play"
+msgid "Tunisia"
+msgstr "Tunisia"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose a monitor"
-msgstr "Dewiswch fonitor"
+msgid "Profile: "
+msgstr "Proffil:"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Graphics card: %s"
-msgstr "Cerdyn graffeg: %s"
+msgid ""
+"Click on a device in the left tree in order to display its information here."
+msgstr "Cliciwch ar ddyfais yn y goeden chwith i gael at ei wybodaeth"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Dewiswch y cydraniad a'r dyfnder lliw"
+msgid "XawTV isn't installed!"
+msgstr "Nid yw XawTV wedi ei osod!"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Resolutions"
-msgstr "Cydraniadau"
+msgid ""
+"Create/Transfer\n"
+"backup keys for SSH"
+msgstr ""
+"Creu/Trosglwyddo\n"
+"allweddi wrth gefn ar gyfer SSH"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 biliwn o liwiau (32 did)"
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr "Peidio cynnwys ffeiliau hanfodol (passwd, group, fstab)"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 miliwn o liwiau (24 did)"
+msgid "old static device name used in dev package"
+msgstr "hen enw dyfais sefydlog yn cael ei ddefnyddio mewn pecyn dev"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mil o liwiau (16 did)"
+msgid "This label is already used"
+msgstr "Mae'r label hwn yn cael ei ddefnyddio eisoes"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mil o liwiau (15 did)"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"Croeso i'r Dewin Gosod Argraffydd\n"
+"\n"
+"Bydd y dewin yn eich cynorthwyo i osod argraffydd(ion) sydd wedi eu cysylltu "
+"Ăą'r cyfrifiadur hwn, yn gysylltiedig Ăą'r rhwydwaith.\n"
+"\n"
+"Os oes gennych argraffydd(ion) yn gysylltiedig Ăą'r peiriant, cysylltwch nhw "
+"Ăą'r peiriant a'u troi nhw mlaen fel bod modd awtoganfod. Hefyd rhaid i "
+"argraffydd(ion) rhwydwaith a'ch peiriannau Windows fod wedi eu cysylltu ac "
+"ymlaen.\n"
+"\n"
+"Sylwer bod awtoganfod argraffyddion ar rwydwaith yn cymryd mwy o amser nag "
+"awtoganfod argraffyddion sy'n gysylltiedig Ăą'r peiriant hwn. Felly, "
+"diffoddwch awto ganfod rhwydwaith pan nad oes mo'i angen.\n"
+"\n"
+"Cliciwch \"Nesaf\" pan ydych yn barod, a \"Diddymu\" os nad ydych am osod "
+"eich argraffydd(ion) ar hyn o bryd."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 lliw (8 did)"
+msgid "After formatting partition %s, all data on this partition will be lost"
+msgstr ""
+"Wedi fformatio rhaniad %s, bydd yr holl ddata ar y rhaniad yn cael ei golli"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Is this the correct setting?"
-msgstr "A' hwn yw'r gosodiad cywir?"
+msgid "Connection Time: "
+msgstr "Amser Cysylltiad:"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Gadael mewn %d eiliad"
+msgid "select perm file to see/edit"
+msgstr "dewis ffeil perm i weld/golygu"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/livedrake:1
#, c-format
msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
-"Digwyddodd gwall:\n"
-"%s\n"
-"Ceisiwch newid parammedrau"
-
-#: ../../Xconfig/test.pm:1
-#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Rhybudd: gall profi'r cerdyn graffeg hwn rewi eich cyfrifiadur"
+"Rhowch y CD Gosod yn eich gyrwr a chlicio Iawn ar ĂŽl gorffen\n"
+"Os nad yw gennych, cliciwch Dileu i osgoi diweddaru."
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Ydych chi eisiau profi'r ffurfweddiad?"
+msgid "Use group id for execution"
+msgstr "Defnyddio enw grwp i weithredu"
-#: ../../Xconfig/test.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Test of the configuration"
-msgstr "Prawf o'r ffurfweddiad"
+msgid "Choose the default user:"
+msgstr "Dewis y defnyddiwr rhagosodedig:"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "What norm is your TV using?"
-msgstr "Pa norm mae eich teledu'n ei ddefnyddio?"
+msgid "Gabon"
+msgstr "Gabon"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
-"Do you have this feature?"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
msgstr ""
-"Mae'n edrych fel bod gan eich cerdyn graffig gyswlltTV-OUT.\n"
-"Mae modd ei ffurfweddu i weithio drwy byffer ffrĂąm.\n"
"\n"
-"Rhaid cysylltu eich cerdyn graffig Ăą'ch teledu cyn cychwyn eich "
-"cyfrifiadur.\n"
-"Dewiswch \"TVout\" yn y cychwynnydd\n"
-"\n"
-"Ydy'r nodwedd hon gennych?"
+"Nid oes angen ffurfweddu argraffyddion ar wasanaethwyr CUPS pell: byddant yn "
+"cael eu canfod yn awtomatig."
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
msgstr ""
-"Hoffwn osod eich cyfrifiadur i gychwyn X yn awtomatig ar ĂŽl cychwyn\n"
-"Hoffech chi i XFree ddechrau wedi i chi ail-gychwyn?"
-
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "Rhyngwyneb graffigol wrth gychwyn"
+"Gallwch ddewis ieithoedd eraill fydd ar gael ar ĂŽl gosod. Dewiswch\n"
+"pa iaith yr hoffech ei osod. Byddant ar gael pan fydd eich gosodiad\n"
+"wedi ei gwblhau a phan fyddwch yn ailgychwyn eich system."
-#: ../../Xconfig/various.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Gyrrwr XFree86: %s\n"
+msgid "Domain"
+msgstr "Parth"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Gwasanaethwr XFree86: %s\n"
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "Union faint o RAM os oes angen (canfod %dMB)"
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Cydraniad: %s\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
+"\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
+"\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
+msgstr ""
+"Cychwynnydd GNU/Linux yw LILO a grub. Fel rheol mae'r rhan yma'n\n"
+"digwydd yn awtomatig. Bydd DrakX yn dadansoddi'r adran cychwyn\n"
+"disg a gweithredu yn Ăą'r yr hyn mae'n ei ganfod yno.\n"
+"\n"
+" *os yw'n canfod adran cychwyn Windows, bydd yn ei amnewid gyda\n"
+"adran cychwyn grub/LILO. O ganlyniad bydd modd i chi gychwyn un\n"
+"ai GNU/Linux neu system arall.\n"
+"\n"
+" *os fydd adran gychwyn grub neu LILO'n cael ei ganfod bydd yn ei\n"
+"amnewid gydag un mwy diweddar.\n"
+"\n"
+"Os nad yw'n medru penderfynu, bydd DrakX yn gofyn i chi lle i osod\n"
+"y cychwynnydd.\n"
+"\"Dyfais cychwyn\": fel rheol ni fydd angen i chi newid o'r rhagosodedig\n"
+"(\"Adran gyntaf gyrrwr (MBR)\"), ond os yw'n well gennych mae modd\n"
+"gosod y cychwynnydd ar yr ail ddisg caled (\"/dev/hdb\"), neu hyd yn\n"
+"oed, ar ddisg meddal (\"Disg Meddal\")."
-#: ../../Xconfig/various.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Color depth: %s\n"
-msgstr "Dyfnder lliw: %s\n"
+msgid "Provider dns 2 (optional)"
+msgstr "Dns 2 y darparwr (dewisol)"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Cof graffeg: %s kB\n"
+msgid "Boot device"
+msgstr "Dyfais cychwyn"
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Cerdyn graffeg: %s\n"
+msgid "Which partition do you want to resize?"
+msgstr "Pa raniad ydych chi am newid ei faint?"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "VertRefresh Monitor: %s\n"
+msgid "United States Minor Outlying Islands"
+msgstr "United States Minor Outlying Islands"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "HorizSync Monitor: %s\n"
+msgid "A tool to monitor your logs"
+msgstr "Offeryn i fonitro eich cofnodion"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
+msgid "Djibouti"
+msgstr "Djibouti"
-#: ../../Xconfig/various.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Dyfais llygoden: %s\n"
+msgid "detected on port %s"
+msgstr "canfyddwyd ar borth %s"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Math o lygoden: %s\n"
+msgid "LPD"
+msgstr "LPD"
#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Cynllun allweddell: %s\n"
+msgid "Graphics card: %s\n"
+msgstr "Cerdyn graffeg: %s\n"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Options: %s"
-msgstr "Dewisiadau: %s"
+msgid "Yaboot"
+msgstr "Yaboot"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mount point: "
-msgstr "Pwynt gosod:"
+msgid "Please check if you are using a DVDRAM device"
+msgstr "Gwiriwch os ydych yn defnyddio dyfais DVDRAM"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Server: "
-msgstr "Gwasanaethwr:"
+msgid "Splash selection"
+msgstr "Dewis sgrĂźn croeso"
-#: ../../diskdrake/dav.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "Rhaid i'r URL gychwyn gyda http:// neu https://"
+msgid "Extended partition not supported on this platform"
+msgstr "Nid yw'r rhainad estynedig yncael ei gynnal ay y platfform hwn"
-#: ../../diskdrake/dav.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Rhowch URL gwasanaethwr WebDAV"
+msgid "ISDN Configuration"
+msgstr "Ffurfweddiad ISDN"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mount point"
-msgstr "Pwynt gosod"
+msgid "high"
+msgstr "uchel"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Server"
-msgstr "Gwasanaethwr"
+msgid "Internet Connection Sharing"
+msgstr "Rhannu Cysylltiad Ăą'r Rhyngrwyd"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Mount"
-msgstr "Gosod"
+msgid "Choose file"
+msgstr "Dewis ffeil"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Unmount"
-msgstr "Dad-osod"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
+msgstr ""
+"Rhybudd! Mae ffurfweddiad mur gwarchod wedi ei ganfod. Efallai bydd angen "
+"atgyweirio gyda llaw ar ĂŽl y gosodiad."
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New"
-msgstr "Newydd"
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "Argraffu/Mynediad Cardiau Llun ar \"%s\""
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
msgstr ""
-"Protocol yw WebDAV sy'n eich caniatĂĄu i chi osod gwasanaethwr gwe'n lleol\n"
-"a'i drin fel system ffeilio lleol ( ar yr amod bod y gwasanaethwr lleol wedi "
-"ei\n"
-"ffurfweddi fel gwasanaethwr WebDAV). Os hoffech ychwanegu pwyntiau\n"
-"gosod WebDAV, dewiswch \"Newydd\""
+"Ydych chi am ganiatĂĄu argraffu ar yr argraffyddion enwir uchod neu ar yr "
+"argraffyddion ar y rhwydwaith lleol?\n"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Defnyddiwch \"%s\" yn lle hynny"
+msgid "Printer default settings"
+msgstr "Gosod yr Argraffydd Rhagosodedig"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Type"
-msgstr "Math"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Llygoden Olwyn PS Generig"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Defnyddiwch \"Dad-osod\" yn gyntaf"
+msgid "Removing old printer \"%s\"..."
+msgstr "Tynnu hen argraffydd \"%s\"..."
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Delete"
-msgstr "Dileu"
+msgid "Select a device !"
+msgstr "Dewis dyfais!"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create"
-msgstr "Creu"
+msgid "Remove selected server"
+msgstr "Tynnu'r gwesteiwr"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Filesystem types:"
-msgstr "Mathau o system ffeiliau:"
+msgid "French Southern Territories"
+msgstr "French Southern Territories"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Empty"
-msgstr "Gwag"
+msgid "the vendor name of the processor"
+msgstr "enw gwerthwr y prosesydd"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Windows"
-msgstr "Windows"
+msgid "All data on this partition should be backed-up"
+msgstr "Dylai'r holl ddata ar y rhaniad gael ei gadw wrth gefn"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "Installing package %s"
+msgstr "Gosod pecynnau %s"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "Checking device and configuring HPOJ..."
+msgstr "Gwirio'r ddyfais a ffurfweddu HPOJ..."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Swap"
-msgstr "Swap"
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
+msgstr "I gael mwy o raniadau, dilëwch un i greu rhaniad estynedig"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Journalised FS"
-msgstr "Jwrnaleiddiwyd FS"
+msgid ""
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
+msgstr ""
+"Mae eich argraffydd wedi ei ffurfweddu'n awtomatig i rhoi mynediad i chi i'r "
+"gyrrwr cerdyn llun o'c cyfrifiadur. Mae modd i chi gael mynediad at eich "
+"cardiau llun drwy'r rhaglen graffigol \"MtoolsFM\" (Dewislen: \"Rhaglenni\" -"
+"> \"Offer ffeil\" -> \"Rheolwr Ffeiliau MTools\") neu ar y llinell "
+"orchymyn: \"mtools\" (\"man mtools\" am ragor o wybodaeth) Bydd ys system o "
+"dan yrrwr \"p\", neu lythrennau canlynol pan fydd gennych fwy nag un "
+"argraffydd HP gyda gyrwyr cerdyn llun. Yn MToolsFM\" mae modd newid rhwng "
+"llythrennau gyrwyr drwy'r maes ar ben uchaf de'r rhestr."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Ext2"
-msgstr "Ext2"
+msgid "Choose packages to install"
+msgstr "Dewis pecynnau i'w gosod"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No hard drives found"
-msgstr "Heb ganfod gyrwyr caled"
+msgid ""
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
+msgstr "\n"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Please click on a partition"
-msgstr "Cliciwch ar raniad"
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr "Bydd pob rhaniad a'u data yn cael ei ddileu ar yrrwr %s"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
msgstr ""
-"Mae gennych un rhaniad MicroSoft Windows mawr\n"
-"Awgrymir eich bod yn newid maint y rhaniad\n"
-"(cliciwch arno, ac yna clicio \"Newid maint\"]"
+"Nid oes gan eich system ddigon o le ar ĂŽl ar gyfer gosodiad neu uwchraddiad "
+"(%d> %d)"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose action"
-msgstr "Dewiswch weithred"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
+msgstr ""
+"Mae pob argraffydd angen enw (e.e. \"argraffydd\". Nid oes angen llanw "
+"meysydd Disgrifiad a Lleoliad. Lle ar gyfer sylwadau'r defnyddiwr sydd yma."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
+msgstr ""
+"\"Argraffydd\": mae clicio ar y botwm\"Ffurfweddu\" yn agor dewin\n"
+"ffurfweddu argraffydd. Darllenwch y pennawd penodol yn y 'Starter Guide'\n"
+"am ragor o wybodaeth am sut i osod argraffydd newydd. Mae'r rhyngwyneb\n"
+"yn debyg i'r un welwyd wrth osod y system."
+
+#: ../../lang.pm:1
#, c-format
-msgid "Wizard"
-msgstr "Dewin"
+msgid "Bhutan"
+msgstr "Bhutan"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Os ydych yn bwriadu defnyddio aboot, gofalwch adael lle gwag (2048 sector yn "
-"ddigon)\n"
-"ar ddechrau'r ddisg."
+msgid "Network interface"
+msgstr "Rhyngwyneb rhwydwaith"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Gwnewch gopi wrth gefn o'ch data yn gyntaf"
+msgid "Reading printer data..."
+msgstr "Darllen data argraffydd..."
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Read carefully!"
-msgstr "Darllenwch yn ofalus!"
+msgid "Korean keyboard"
+msgstr "Bysellfwrdd Coreaidd"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Encryption key (again)"
-msgstr "Allwedd amgryptio (eto)"
+msgid "Not connected"
+msgstr "Heb gysylltu"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Encryption key"
-msgstr "Allwedd amgryptio"
+msgid "Greek"
+msgstr "Groegaidd"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "The encryption keys do not match"
-msgstr "Nid yw'r allweddi amgryptio'n cydfynd"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
+msgstr ""
+"Ymresymiadau: (arg)\n"
+"\n"
+"Os yw \\fIarg\\fP = ALL caniatĂĄ /etc/issue a /etc/issue.net i fodoli. Os yw "
+"\\fIarg\\fP = NONE\n"
+"dim materion heblaw caniatĂĄu /etc/issue."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
+msgid "Saint Kitts and Nevis"
+msgstr "Saint Kitts a Nevis"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
msgstr ""
-"Mae'r allwedd amgryptio'n rhy syml (mae'n rhaid bod o leiaf %d nod o hyd)"
+"Roedd y trosglwyddiad yn llwyddiannus\n"
+"Efallai'r hoffechi wirio eich bod yn medru mewngofnodi i'r gwasanaether "
+"gyda:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"heb dderbyn cais am gyfrinair"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "Dewiswch eich allwedd amgryptio system ffeiliau"
+msgid "Enable OF Boot?"
+msgstr "Galluogi Cychwyn OF?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Filesystem encryption key"
-msgstr "Allwedd amgryptio system ffeil : "
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "Does dim modd defnyddio JFS ar raniadau llai na 16MB"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Type: "
-msgstr "Math: "
+msgid "Monitor VertRefresh: %s\n"
+msgstr "VertRefresh Monitor: %s\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "on channel %d id %d\n"
-msgstr "ar sianel %d id %d\n"
+msgid "path"
+msgstr "llwybr"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tabl rhaniad math: %s\n"
+msgid "Mount point"
+msgstr "Pwynt gosod"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Dias LVM %s\n"
+msgid ""
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
+msgstr ""
+"Digwyddodd gwall:\n"
+"%s\n"
+"Ceisiwch newid parammedrau"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Info: "
-msgstr "Gwybodaeth:"
+msgid "Restore system"
+msgstr "Adfer y system"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometreg: %s silindr, %s pen, %s sector\n"
+msgid ""
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
+msgstr ""
+"Dyma'r cyfrifiaduron a rhwydweithiau ddylai'r sganiwr lleol fod ar gael:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Size: %s\n"
-msgstr "Maint: %s\n"
+msgid "The DHCP end ip"
+msgstr "Enw terfyn DHCP"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Read-only"
-msgstr "Darllen yn unig"
+msgid "Another one"
+msgstr "Un arall"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Device: "
-msgstr "Dyfais: "
+msgid "Drakbackup"
+msgstr "Drakbackup"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Mae'r rhaniad Bootstrap\n"
-"hwn ar gyfer cychwyniad\n"
-"dwbl eich system\n"
+msgid "Colombia"
+msgstr "Colombia"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
+"Current configuration of `%s':\n"
"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
msgstr ""
+"Ffurfweddiad presennol '%s':\n"
"\n"
-"Mwy na thebyd rhaniad Gyrrwr\n"
-"yw'r rhaniad hwn. Gwell gadael\n"
-"llonnydd iddo.\n"
+"Rhwydwaith: %s\n"
+"Cyfeiriad IP: %s\n"
+"Priodweddau IP: %s\n"
+"Gyrrwr: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Loopback file name: %s"
-msgstr "Enw ffeil cylch-ĂŽl: %s"
+msgid "Plug'n Play"
+msgstr "Plug'n Play"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Disg RAID %s\n"
+msgid "Reunion"
+msgstr "Reunion"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Chunk size %s\n"
-msgstr "Maint darn %s\n"
+msgid "Details"
+msgstr "Manylion"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Level %s\n"
-msgstr "Lefel %s\n"
+msgid "For security reasons, it will be disconnected now."
+msgstr "Am resymau diogelwch, bydd yn cael ei ddatgysylltu."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Cychwyn y rhaniad fel rhagosodwyd\n"
-" (ar gyfer cychwyn MS-DOS, nid ar gyfer lilo)\n"
+msgid "Synchronization tool"
+msgstr "Offeryn Cydamseru"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr ""
-"Ffeil(iau) Cylch-ĂŽl:\n"
-" %s\n"
+msgid "Checking your system..."
+msgstr "Gwirio eich system..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+msgid "Print"
+msgstr "Argraffu"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mounted\n"
-msgstr "Gosodwyd\n"
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
+"Rhowch y tĂąp gyda label cynnwys%s\n"
+"yn yr gyrrwr tĂąp %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not formatted\n"
-msgstr "Heb ei fformatio\n"
+msgid "Mongolia"
+msgstr "Mongolia"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Formatted\n"
-msgstr "Wedi ei fformatio\n"
+msgid "Mounted\n"
+msgstr "Gosodwyd\n"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Silindr %d i silindr %d\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Graphical Interface"
+msgstr "Rhyngwyneb graffigol"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ", %s sectors"
-msgstr ", %s sector"
+msgid "Restore Users"
+msgstr "Adfer Defnyddwyr"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Size: %s"
-msgstr "Maint: %s"
+msgid "Encryption key for %s"
+msgstr "Allwedd amgryptio ar gyfer %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Start: sector %s\n"
-msgstr "Dechrau: sector %s\n"
+msgid ""
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
+msgstr ""
+"Mae'r mapiwr porth (portmapper) yn rheoli cysylltiadau RPC, \n"
+"sy'n cael eu defnyddio gan brotocolau fel NFS a NIS. Rhaid i wasanaethwr "
+"porthmap\n"
+"redeg ar beiriannau sy'n gweithredu fel gwasanaethwyr ar gyfer protocolau "
+"sy'n\n"
+"gwneud defnydd o fecanwaith RPC."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Name: "
-msgstr "Enw :"
+msgid "Detected hardware"
+msgstr "Caledwedd canfyddwyd"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Llythyren gyrrwr DOS: %s (dim ond dyfalu)\n"
+msgid "Mauritius"
+msgstr "Mauritius"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "partition %s is now known as %s"
-msgstr "Mae rhaniad %s yn cael ei alw'n %s"
+msgid "Myanmar (Burmese)"
+msgstr "Myanmar (Burma)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Removing %s"
-msgstr "Tynnu %s"
+msgid "Enabling swap partition %s"
+msgstr "Galluogi rhaniad cyfnewid %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Copying %s"
-msgstr "CopĂŻo %s"
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgstr ""
+"Nid oes rhaniadau FAT i'w defnyddio fel cylch-ĂŽl (neu nad oes digon o le ar "
+"ĂŽl)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Moving files to the new partition"
-msgstr "Symud ffeiliau i'r rhaniad newydd"
+msgid "Armenian (old)"
+msgstr "Armenaidd (hen)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
msgstr ""
-"Mae cyfarwyddiadur %s eisoes yn cynnwys peth data\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Hide files"
-msgstr "Cuddio ffeiliau"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Move files to the new partition"
-msgstr "Symud ffeiliau i'r rhaniad newydd"
+"Mae argraffydd o'r enw \"%s\" yn bodoli eisoes yn %s.\n"
+"Cliciwch \"Trosglwyddo\" i ysgrifennu drosto.\n"
+"Mae modd i chi osod enw newydd arno neu ei hepgor."
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
+msgid ""
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
msgstr ""
-"Wedi fformatio rhaniad %s, bydd yr holl ddata ar y rhaniad yn cael ei golli"
+"Dewch o hyd i ateb eich anhawsterau drwy blatfform cefnogaeth ar-lein "
+"MandrakeSoft."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Mi fydd angen i chi aillgychwyn cyn i'r newidiadau ddod i rym"
+msgid ", host \"%s\", port %s"
+msgstr ", gwesteiwr \"%s\", porth %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Mae tabl rhaniad gyrrwr %s yn mynd i gael ei ysgrifennu i'r ddisg!"
+msgid "Monaco"
+msgstr "Monaco"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "Rhaid cael pecyn %s. Ydych chi am ei osod?"
+msgid "%s formatting of %s failed"
+msgstr "methodd fformatio %s o %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "What type of partitioning?"
-msgstr "Pa fath o raniad ?"
+msgid "Partitioning failed: %s"
+msgstr "Methodd rhannu: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Byddwch ofalus: mae'r weithred hon yn beryglus."
+msgid "Canada (cable)"
+msgstr "Canada (cabl)"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "chunk size"
-msgstr "maint darn"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Upgrade"
+msgstr "Diweddaru %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "level"
-msgstr "lefel"
+msgid "Workstation"
+msgstr "Man Gwaith"
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "device"
-msgstr "dyfais"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"Gosod pecyn %s\n"
+"%d%%"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Various"
-msgstr "Amrywiol"
+msgid "Kyrgyzstan"
+msgstr "Kyrgyzstan"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Mount options"
-msgstr "Dewisiadau gosod"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "With basic documentation"
+msgstr "Gyda dogfennaethelfennol (argymhellir!)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "File already exists. Use it?"
-msgstr "Mae'r ffeil yn bodoli eisoes. Defnyddiwch hwn?"
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anacron trefnydd gorchymyn cyfnodol"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "File is already used by another loopback, choose another one"
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
-"Mae'r ffeil yn cael ei ddefnyddio eisoes gam gylch-ĂŽl arall, dewiswch un "
-"arall"
+"Rhaid bod gennych raniad gwraidd.\n"
+"Crëwch raniad (neu glicio ar un presennol)\n"
+"Yna dewiswch weithred \"Pwynt Gosod\" a'i osod i `/'"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Give a file name"
-msgstr "Rhowch enw ffeil"
+msgid "Proxy should be http://..."
+msgstr "Dylai dirprwyon fod yn gyfanrif!"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Filesystem type: "
-msgstr "Math o system ffeilio"
+msgid "South Africa"
+msgstr "De Affrica"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Size in MB: "
-msgstr "Maint mewn MB: "
+msgid "Western Sahara"
+msgstr "Western Sahara"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Loopback file name: "
-msgstr "Enw ffeil cylch-ĂŽl"
+msgid "Etherboot Floppy/ISO"
+msgstr "Etherboot Floppy/ISO"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Loopback"
-msgstr "Cylch-ĂŽl"
+msgid "Modify printer configuration"
+msgstr "Newid ffurfweddiad yr argraffydd"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "Niid oes modd defnyddio'r rhaniad ar gyfer cylch-ĂŽl"
+msgid "Choose a partition"
+msgstr "Dewiswch raniad"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "LVM name?"
-msgstr "Enw LVM"
+msgid "Edit current rule"
+msgstr "Golygu'r rheol bresennol"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "new"
-msgstr "newydd"
+msgid "%s"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Dewis LVM presennol i ychwanegu ato"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
+msgstr ""
+"Ymresymiadau: arg)\n"
+"\n"
+"Galluogi?Analluogi mewngofnodi pecynnau anarferol IPv4."
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Dewis RAID presennol i ychwanegu ato"
+msgid "Please test the mouse"
+msgstr "Profwch y llygoden"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Moving partition..."
-msgstr "Yn symud rhaniad.."
+msgid "Other Media"
+msgstr "Cyfrwng Arall"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Moving"
-msgstr "Symud"
+msgid "Backup system files"
+msgstr "Ffeiliau System Cadw wrth Gefn"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "Pa sector hoffech chi symud ato?"
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Sector"
msgstr "Sector"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "Pa ddisg hoffech chi symud iddo?"
+msgid "Qatar"
+msgstr "Qatar"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Move"
-msgstr "Symud"
+msgid "LDAP Base dn"
+msgstr "Sail dn LDAP"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "New size in MB: "
-msgstr "Maint mewn MB: "
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr "Nid oes modd i chi ddewis y pecyn hwn - does dim lle ar ol i'w osod"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Choose the new size"
-msgstr "Dewiswch y maint newydd"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "generate auto-install floppy"
+msgstr "Creu disg meddal awto gosod"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Resize"
-msgstr "Newid maint"
+msgid "Dialing mode"
+msgstr "Modd deialu"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Ar ĂŽl newid maint rhaniad %s, bydd yr holl ddata ar y rhaniad yma yn cael ei "
-"golli"
+msgid "File sharing"
+msgstr "Rhannu Ffeiliau"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Dylai'r holl ddata ar y rhaniad gael ei gadw wrth gefn"
+msgid "Clean /tmp at each boot"
+msgstr "Glanhau /tmp bob tro fyddwch yn cychwyn"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This partition is not resizeable"
-msgstr "Nid oes modd newid maint y rhaniad"
+msgid "Malawi"
+msgstr "Malawi"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Cyfrifo ffiniau system ffeiliau FAT"
+msgid "Please choose your type of mouse."
+msgstr "Dewiswch math eich llygoden"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "Lle'r ydych am osod %s?"
+msgid "class of hardware device"
+msgstr "dosbarth y dyfais caledwedd"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
msgstr ""
-"Methu dadsetio'r pwynt gosod gan fod y rhaniad yn cael ei ddefnyddio ar "
-"gyfer cylch-ĂŽl\n"
-"Tynnu'r cylch-ĂŽl yn gyntaf"
+"Dyma'r cyfrifiaduron a rhwydweithiau ddylai'r argraffydd(ion) lleol fod ar "
+"gael:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Lle'r ydych am osod dyfais %s?"
+msgid "United Kingdom"
+msgstr "Y Deyrnas Unedig"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "Lle'r hoffech chi osod y ffeil cylch-ol %s?"
+msgid "running"
+msgstr "rhedeg"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "Newid o ext2 i ext3"
+msgid "default"
+msgstr "rhagosodedig"
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which filesystem do you want?"
-msgstr "Pa fath o system ffeil ydych chi eisiau?"
+msgid "Indonesia"
+msgstr "Indonesia"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Change partition type"
-msgstr "Newid math y rhaniad"
+msgid "France [SECAM]"
+msgstr "Ffrainc(SECAM)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "restrict"
+msgstr "cyfyngu"
+
+#: ../../pkgs.pm:1
+#, c-format
+msgid "must have"
+msgstr "rhaid cael"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
msgstr ""
-"Wedi newid math raniad %s, bydd yr holl ddata ar y rhaniad yn cael ei golli"
+"Nid yw CUPS yn cefnogi argraffyddion ar wasanaethwyr Novell neu "
+"argraffyddion sy'n anfon data mewn gorchymyn ffurf -rhydd.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remove the loopback file?"
-msgstr "Tynnu'r ffeil cylch-ĂŽl?"
+msgid "Senegal"
+msgstr "Senegal"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Command line"
+msgstr "Llinell orchymyn"
+
+#: ../../share/advertising/08-store.pl:1
#, c-format
msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
msgstr ""
-"Nid oes modd i chi greu rhaniad newydd\n"
-"(gan eich bod wedi cyrraedd y nifer uchaf o raniadau cynradd).\n"
-"Diddymwch raniad cynradd a chreu rhaniad estynedig."
+"Mae amrediad eang o ddarpariaeth Linux, yn ogystal Ăą chynigion arbennig ar "
+"gynnyrch a 'difyrrwch', ar gael ar-lein yn ein e-siop"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Preference: "
-msgstr "Dewis"
+msgid "access to administrative files"
+msgstr "mynediad i ffeiliau gweinyddol"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Start sector: "
-msgstr "Sector dechreuol: "
+msgid ""
+"Error during sendmail.\n"
+" Your report mail was not sent.\n"
+" Please configure sendmail"
+msgstr ""
+"Gwall wrth ddefnyddio sendmail\n"
+" chafodd eich adroddiad e-bost mo'i anfon\n"
+" Ffurfweddwch eich sendmail"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Create a new partition"
-msgstr "Creu rhaniad newydd"
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ", dyfais amlbwrpas ar borth paralel \\#\"%s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Use for loopback"
-msgstr "Defnyddiwch ar gyfer cylchol"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
+msgstr ""
+"Ymresymiadau: (val)\n"
+"\n"
+"Gosod amser allan y gragen. Gwerth sero'n golygu dim amser allan."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Modify RAID"
-msgstr "Newid RAID"
+msgid "Montserrat"
+msgstr "Montserrat"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Remove from LVM"
-msgstr "Tynnu o LVM"
+msgid "Automatic dependencies"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Remove from RAID"
-msgstr "Tynnu o RAID"
+msgid "Swap"
+msgstr "Swap"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Add to LVM"
-msgstr "Ychwanegu i LVM"
+msgid "Connecting to the Internet "
+msgstr "Cysylltu Ăą'r Rhyngrwyd"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add to RAID"
-msgstr "Ychwanegu i RAID"
+msgid "Restore Other"
+msgstr "Adfer Arall"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Format"
-msgstr "Fformatio"
+msgid "TV card"
+msgstr "Cerdyn Teledu"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Detailed information"
-msgstr "Gwybodaeth fanwl"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "Argraffydd ar wasanaethwr SMB/Windows 95/98/NT"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Trying to rescue partition table"
-msgstr "Yn ceisiio achub y tabl rhaniadau"
+msgid ", "
+msgstr ", "
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
msgstr ""
-"Rhowch ddisg meddal yn y gyrrwr\n"
-"Mi fydd yr holl wybodaeth ar y disg meddal yma yn cael ei golli"
-
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Warning"
-msgstr "Rhybudd"
+"Ymresymiadau: (umask)\n"
+"\n"
+"Gosod gwraidd umask."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select file"
-msgstr "Dewiswch ffeil"
+msgid "Remove selected host/network"
+msgstr "Tynnu'r gwesteiwr/rhwydwaith"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
msgstr ""
-"Nid yw'r tabl rhaniad wrth gefn yr un maint\n"
-"Parhau?"
+"Mae Postfix yn Asiant Cludo E-bost (MTA), sef rhaglen sy'nsymud e-bost o un "
+"peiriant i'r llall."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Removable media automounting"
-msgstr "Cyfrwng symudadwy'n awto-osod"
+msgid "Disconnection from the Internet failed."
+msgstr "Methodd datgysylltu o'r Rhyngrwyd."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Reload partition table"
-msgstr "Ail-lwytho'r tabl rhaniad"
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
+msgstr ""
+"Yma medrwch ddewis yr bysell neu gyfuniad o fysellau fydd yn\n"
+"caniatĂĄu newid rhwng bysellfyrddau gwahanol (e.e.: lladin neu\n"
+"arall)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Rescue partition table"
-msgstr "Achub y tabl rhaniadau"
+msgid "Network Hotplugging"
+msgstr "Plygiobyw'rRhwydwaith"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Restore partition table"
-msgstr "Adfer y tabl rhaniad"
+msgid "if set to yes, reports check result to tty."
+msgstr "os wedi ei osod i iawn, adrodd adroddiadau gwirio i tty."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Save partition table"
-msgstr "Cadw'r tabl rhaniad"
+msgid "Restore From CD"
+msgstr "Adfer o'r CD"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr "I gael mwy o raniadau, dilëwch un i greu rhaniad estynedig"
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
+msgstr ""
+"Rydych ar fin ffurfweddu eich cyfrifiadur i rannu ei gysylltiad Rhyngrwyd\n"
+"Gyda'r nodwedd hwn bydd cyfrifiaduron eraill ar eich rhwydwaith lleol yn "
+"medru rhannu cyswllt rhyngrwyd y cyfrifiadur hwn.\n"
+"\n"
+"Gwnewch yn siwr eich bod wedi ffurfweddu eich mynediad Rhwydwaith/Rhyngrwyd "
+"gyda drakconnect cyn mynd ymhellach.\n"
+"\n"
+"Sylwer: bydd angen Addasydd Rhwydwaith un-pwrpas i greu Rhwydwaith Lleol "
+"(LAN)."
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "I can't add any more partition"
-msgstr "Does dim modd ychwanegu raniadau ychwanegol"
+msgid ""
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr ""
+"Dewiswch pa addaswr rhwydwaith hoffech ei ddefnyddio i gysylltu Ăą'r Rhyngrwyd"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "All primary partitions are used"
-msgstr "Mae pob rhaniad cynradd wedi ei ddefnyddio"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr "Mynediad i gerdyn cof ffoto ar eich dyfais HP amlbwrpas"
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Hard drive information"
-msgstr "Gwybodaeth am y ddisg caled"
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
+"Cewch well perfformiad eich cyfrifiadur gyda chymorth dewis o gwmniau sy'n "
+"cynnig atebion proffesiynnol sy'n cydweddu Ăą Mandrake Linux "
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Auto allocate"
-msgstr "Awto ddynodi"
+msgid "Internet Connection Sharing is now disabled."
+msgstr "Mae Rhannu Cysylltiad Ăą'r Rhyngrwyd wedi ei analluogi."
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Clear all"
-msgstr "Clirio i gyd"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr "os wedi ei osod i iawn, gwirio checksum y ffeiliau suid/sgid."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Ydych eisiau cadw newidiadau /etc/fstab"
+msgid "Latin American"
+msgstr "Lladin America"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Gorffen heb ysgrifennu'r tabl rhaniadau?"
+msgid "Japanese text printing mode"
+msgstr "Modd argraffu testun Siapanaeëg"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Quit without saving"
-msgstr "Gorffen heb gadw"
+msgid "Old device file"
+msgstr "Hen ffeil dyfais"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Continue anyway?"
-msgstr "Parhau beth bynnag?"
+msgid "Info: "
+msgstr "Gwybodaeth:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Toggle to expert mode"
-msgstr "Cyffredinol > Arbennigwr"
+msgid "Button `%s': %s"
+msgstr "Botwm '%s'.%s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Toggle to normal mode"
-msgstr "Arbennigwr > Cyffredinol"
+msgid "Please wait"
+msgstr "Arhoswch"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Undo"
-msgstr "Dadwneud"
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Exit"
-msgstr "Gadael"
+msgid "None"
+msgstr "Dim"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose a partition"
-msgstr "Dewiswch raniad"
+msgid "The entered IP is not correct.\n"
+msgstr "Nid yw'r IP'n gywir.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose another partition"
-msgstr "Dewiswch raniad arall"
+msgid "Ethernet Card"
+msgstr "Cerdyn Ethernet"
-#: ../../diskdrake/removable.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Change type"
-msgstr "Newid y math"
+msgid "Info"
+msgstr "Gwybodaeth"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Search servers"
-msgstr "Chwiliwch am wasanaethwyr"
+msgid "Install"
+msgstr "Gosodiad"
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Domain"
-msgstr "Parth"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr ""
+"Cliciwch \"Iawn\" os ydych am ddileu'r holl ddata a rhaniadau sy'n "
+"bresennol\n"
+"ar y disg. Byddwch ofalus, wedi i chi glicio \"Iawn ->\" ni fydd modd i chi\n"
+"adfer unrhyw ddata na rhaniadau presennol ar y disg caled, gan gynnwys\n"
+"data Windows.\n"
+"\n"
+"Cliciwch \" <- Blaenorol\" i atal y weithred hon heb golli unrhyw ddata\n"
+"a rhaniadau sy'n bresennol ar y ddisg galed."
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Username"
-msgstr "Enw defnyddiwr"
+msgid "Exit install"
+msgstr "Gorffen"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Please enter your username, password and domain name to access this host."
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
msgstr ""
-"Rhowch eich enw defnyddiwr, cyfrinair ac enw parth i gael mynediad i'r "
-"gwesteiwr."
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Domain Authentication Required"
-msgstr "Angen Dilysu Parth"
+"Mae popeth wedi ei ffurfweddu\n"
+"Gallwch rannu cysylltiad Ăą'r Rhyngrwyd gyda chyfrifiaduron eraill ar eich "
+"Rhwydwaith Lleol gan ddefnyddio ffurfweddiad rhwydwaith awtomatig (DHCP)."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Another one"
-msgstr "Un arall"
+msgid "Remote CUPS server"
+msgstr "Gwasanaethwr CUPS pell"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Which username"
-msgstr "Pa enw defnyddiwr"
+msgid "Sun - Mouse"
+msgstr "Llygoden - Sun"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Can't login using username %s (bad password?)"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
msgstr ""
-"Methu mewngofnodi gan ddefnyddio enw defnyddiwr %s (cyfrinair anghywir?)"
+"Dim ond un addasydd rhwydwaith wedi ei ffurfweddu sydd ar eich system\n"
+"\n"
+"%s\n"
+"\n"
+"Rwyf ar fin gosod eich Rhwydwaith Lleol gyda'r addasydd hwnnw.."
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "cpu # "
-msgstr "cpu # "
+msgid "Minimal install"
+msgstr "Gosodiad lleiaf"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "SMBus controllers"
-msgstr "Rheolyddion SMBus"
+msgid "Ethiopia"
+msgstr "Ethiopia"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "USB controllers"
-msgstr "Rheolyddion USB"
+msgid "Devanagari"
+msgstr "Devanagari"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "SCSI controllers"
-msgstr "Rheolyddion SCSI"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr ""
+"- dyfeisiau pci: dyma slot PCI, dyfais a gwaith y cerdyn\n"
+"- dyfeisiau ide: mae'r ddyfais un ai yn was neu feistr\n"
+"- dyfeisiau scsi: dynodiad dyfeisiau scsi a'r bws scsi"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Firewire controllers"
-msgstr "Rheolyddion firewire"
+msgid "Total size: %d / %d MB"
+msgstr "Cyfanswm maint: %d/%d MB"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "Rheolyddion (E)IDE/ATA"
+msgid "disabled"
+msgstr "anablwyd"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Joystick"
-msgstr "Ffon hud"
+msgid "Search for new scanners"
+msgstr "Chwilio am sganwyr newydd"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Scanner"
-msgstr "Sganiwr"
+msgid "Disabling servers..."
+msgstr "Analluogi gwasanaethwyr..."
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unknown/Others"
-msgstr "Anhysbys/Eraill"
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr ""
+"Dewiswch faint o amser\n"
+"fydd rhwng pob cadw wrth gefn"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Bridges and system controllers"
-msgstr "Rheolyddion pontydd a syatem"
+msgid "Installation of %s failed. The following error occured:"
+msgstr "Mae gosod %s wedi methu. Digwyddodd y gwall canlynol:"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Modem"
-msgstr "Modem"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr "Methu cychwyn mkinitrd -f /boot/initrd-%s.img %s."
-#: ../../harddrake/data.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Ethernetcard"
-msgstr "Cerdyn Ethernet"
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
+msgstr ""
+"Rydych wedi dewis y gwasanaethwr(wyr) canlynol: %s\n"
+"\n"
+"\n"
+"Mae'r gwasanaethwyr canlynol yn cael eu cychwyn drwy ragosodiad. Does\n"
+"ganddynt unrhyw faterion diogelwch hysbys, ond mae'n bosibl i rai ddod i'r\n"
+"golwg. Os felly rhaid uwchraddio gynted ag y bo modd\n"
+"\n"
+"Ydych chi wir eisiau gosod y gwasanaethwyr hyn?\n"
-#: ../../harddrake/data.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Processors"
-msgstr "Prosesyddion"
+msgid "Network printer (TCP/Socket)"
+msgstr "Argraffydd rhwydwaith (TCP/Soced)"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Webcam"
-msgstr "Webcam"
+msgid "Backup User files..."
+msgstr "Ffeiliau Defnyddiwr Cadw wrth Gefn..."
-#: ../../harddrake/data.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Soundcard"
-msgstr "Cerdyn sain"
+msgid "Install system"
+msgstr "Gosod y system"
-#: ../../harddrake/data.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Other MultiMedia devices"
-msgstr "Dyfeisiau AmlGyfrwng eraill"
+msgid "First DNS Server (optional)"
+msgstr "Gwasanaethwr DNS Cyntaf (dewisol)"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Tvcard"
-msgstr "Cerdyn Teledu"
+msgid ""
+"Alternatively, you can specify a device name/file name in the input line"
+msgstr "Yn lle hynny, rhowch enw dyfais/ffeil ar y ninell mewnbwn"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Videocard"
-msgstr "Cerdyn fideo"
+msgid "dhcpd Config..."
+msgstr "Ffurfweddu dhcpd..."
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Tape"
-msgstr "TĂąp"
+msgid "The setup has already been done, but it's currently disabled."
+msgstr "Mae'r gosodiad wedi ei gyflawnu, mae wedi ei anallluogi ar hyn o bryd."
-#: ../../harddrake/data.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
+msgid "LILO/grub Installation"
+msgstr "Gosodiad LILO/grub"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "CD/DVD burners"
-msgstr "Llosgwyr CD/DVD"
+msgid "Israeli"
+msgstr "Israelaidd"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "CDROM"
-msgstr "CDROM"
+msgid "load setting"
+msgstr "gosodiad llwyth"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disk"
-msgstr "Disg"
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "Argraffydd \"%s\" ar wasanaethwr \"%s\""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Zip"
-msgstr "Zip"
+msgid "Floppy can be removed now"
+msgstr "Mae modd tynnu'r disg meddal nawr"
-#: ../../harddrake/data.pm:1
-#, c-format
-msgid "Floppy"
-msgstr "Disg Meddal"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Truly minimal install"
+msgstr "Gosodiad lleiaf"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Let me pick any driver"
-msgstr "Dewis gyrrwr fy hun"
+msgid "Denmark"
+msgstr "Denmarc"
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Driver:"
-msgstr "Gyrrwr:"
+msgid "Moving partition..."
+msgstr "Yn symud rhaniad.."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
-"Os ydych yn siwr eich bod yn gwybod pa yrrwr sydd angen ar gyfer eich\n"
-"cerdyn yna dewiswch un o'r rhestr uchod\n"
-"\n"
-"Y gyrrwr presennol ar gyfer eich cerdyn \"%s\" yw \"%s\" "
+msgid "(This) DHCP Server IP"
+msgstr "Gwasanaethwr DHCP IP (Hwn)"
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr "Dewis gyrrwr ar hap"
+msgid "Test of the configuration"
+msgstr "Prawf o'r ffurfweddiad"
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Installing %s ..."
+msgstr "Gosod %s..."
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
msgstr ""
-"Prawf gwall sain - rhedeg y gorchmynion canlynol:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" pa yrrwyr i'w defnyddio\n"
-"drwy ragosodiad\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" pa yrrwyr mae'n defnyddio\n"
-"ar hyn o bryd\n"
-"\n"
-"- \"/sbin/lsmod\" gwirio os yw ei yrrwr wedi ei lwytho\n"
-"a'i peidio\n"
+"Os ydych wedi dweud wrth y gosodwr eich bod am ddewis pecynnau'n unigol\n"
+"bydd coeden yn cynnwys yr holl becynnau wedi eu dosbarthu yn ĂŽl grwp ac\n"
+"isgrwp. Wrth bori'r goeden, gallwch ddewis grwp cyfan, isgrwp neu becyn\n"
+"unigol.\n"
"\n"
-"- \"/sbin/chkconfig --list sound\" a \"/sbin/chkconfig --list alsa\" dangos\n"
-"os yw sain a gwasanaethau alsa services sydd wedi eu ffurfweddu yn rhedwg\n"
-"ar initlevel 3\n"
+"Pryd bynnag fyddwch wedi dewis pecyn ar y goeden, bydd disgrifiad yn\n"
+"ymddangos ar y dde. \n"
+"!! Os oes pecyn gwasanaethwr wedi ei ddewis yn fwriadol neu am ei fod yn "
+"rhan\n"
+"o grwp cyfan, bydd angen i chi gadarnhau eich bod eisiau i'r gwasanaethwyr\n"
+"gael eu gosod. Ym Mandrake Linux mae unrhyw wasanaethwr sydd wedi ei\n"
+"osod yn cael ei gychwyn fel rhagosodiad wrth gychwyn. Hyd yn oed os ydynt\n"
+"yn ddiogel a doedd dim materion pryder pan gafodd y dosbarthiad ei ryddhau,\n"
+"mae'n bosibl i fylchau diogelwch gael eu darganfod wedi i'r fersiwn hwn o\n"
+"Mandrake Linux gael ei gwblhau. Os nad ydych yn gwybod beth mae\n"
+"gwasanaeth arbennig i fod i'w wneud na pham mae wedi ei osod, yna cliciwch\n"
+"\"Na\". Bydd clicio \"Iawn\" yn gosod y gwasanaethau hynny a byddant yn\n"
+"cael eu cychwyn yn ddiofyn drwy ragosodiad!!\n"
"\n"
-"- \"aumix -q\" a yw'r sain wedi ei ddistewi a'i peidio\n"
+"Mae'r dewis \"Dibyniaethau Awtomatig\"yn analluogi'r deialog rhybudd sy'n\n"
+"ymddangos bob tro fydd y gosodwr yn dewis pecyn yn awtomatig.\n"
+"Mae hyn yn digwydd am ei fod wedi penderfynu ei fod angen bodloni\n"
+"dibyniad gyda phecyn arall er mwyn cwblhau'r gosodiad yn llwyddiannus\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" pa rhaglen sy'n defnyddio'r cerdyn sain.\n"
-
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Sound trouble shooting"
-msgstr "Datrys problemau sain"
+"Mae'r eicon disg medal bychan ar waelod y rhestr yn caniatĂĄu llwytho'r\n"
+"rhestr pecynnau dewiswyd yn ystod gosodiad blaenorol. Bydd clicio\n"
+"ar yr eicon hwn yn gofyn i chi osod yn y peiriant disg meddal grëwyd ar\n"
+"ddiwedd gosodiad arall. Gwelwch yr ail neges o'r cam diwethaf ar sut i\n"
+"greu disg meddal o'r fath."
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "Gwall. Nid yw gyrrwr \"%s\" wedi ei restru"
+msgid "Choose your filesystem encryption key"
+msgstr "Dewiswch eich allwedd amgryptio system ffeiliau"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unkown driver"
-msgstr "Gyrrwr anhysbys"
+msgid ""
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
+msgstr ""
+"Dewiswch eich dyfais CD/DVD\n"
+"(Gwasgwch Enter i drosglwyddo'r gosodiadau i feysydd eraill.\n"
+"Nid yw'r maes hwn yn angenrheidiol, dim ond offeryn i lanw'r ffurflen.)"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "Nid oes gyrrwr hysbys ar gyfer eich cerdyn sain (%s)"
+msgid "Andorra"
+msgstr "Andorra"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No known driver"
-msgstr "Dim gyrrwr hysbys"
+msgid "Sierra Leone"
+msgstr "Sierra Leone"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-"Nid oes gyrrwr rhydd ar gyfer eich cerdyn sain (%s) ond mae yrrwr perchnogol "
-"yn \"%s\" ."
+msgid "Botswana"
+msgstr "Botswana"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "No open source driver"
-msgstr "Dim gyrrwr cod agored"
+msgid "(default value: %s)"
+msgstr "(gwerth rhagosodedig: %s)"
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Arhoswch...Gosod y ffurfweddiad"
+msgid "Alternative test page (Letter)"
+msgstr "Prawf tudalen arall (Llythyr)"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"The old \"%s\" driver is blacklisted.\n"
+"DHCP Server Configuration.\n"
"\n"
-"It has been reported to oops the kernel on unloading.\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-"Mae'r hen yrrwr \"%s\" wedi ei wahardd.\n"
+"Ffurfweddiad Gwasanaethwr DHCP\n"
"\n"
-"Mae'n effeithio'n andwyol ar y cnewyllyn\n"
+"Mae modd dewis dewisiadau gwahanol ar gyfer ffurfweddiad DHCP.\n"
+"Os nad ydych yn gwybod ystyr y dewis, gadewch lonydd iddo.\n"
"\n"
-"Bydd y gyrrwr \"%s|\"'n cael ei ddefnyddio ar y cychwyn"
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Trouble shooting"
-msgstr "Datrys problemau"
+msgid "Choose an X server"
+msgstr "Dewiswch wasanaethwr X"
-#: ../../harddrake/sound.pm:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Swap partition size in MB: "
+msgstr "Maint rhaniad cyfnewid mewn MB: "
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
+"Other (not drakbackup)\n"
+"keys in place already"
msgstr ""
-"OSS (Open Sound System) oedd yr API sain cyntaf. Mae'n API sail annibynnol o "
-"systemau gweithredu ( mae ar gael ar gyfer y rhan fwyaf o systemau unices) "
-"on mae'n API elfennol iawn a chyfyng.\n"
-"Mae gyrwyr OSS hefyd yn ail ddyfeisio'r hyn sy'n bod eisoes.\n"
-"\n"
-"Mae ALSA (Advanced Linux Sound Architecture) yn bensaerniaeth fodiwlaidd "
-"sy'n \n"
-"cynnal ystod eang o gardiau ISA, USB a PCI.\n"
-"\n"
-"Mae hefyd yn darparu API llawer uwch na OSS.\n"
-"\n"
-"I ddefnyddio alsa, mae modd defnyddio un ai:\n"
-"- hen api OSS cydweddus\n"
-"-api ALSA newydd sy'n darparu llawer o nodweddion gell ond sydd angen "
-"defnyddio llyfrgell ALSA.\n"
+"Allweddi eraill (nid drakbackup)\n"
+"yn eu lle yn barod"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "No changes to backup!"
+msgstr "Dim newid i'r ffeil wrth gefn"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Formatted\n"
+msgstr "Wedi ei fformatio\n"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Type of install"
+msgstr "Math o osodiad"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "Argraffydd \"%s\" ar wasanaethwr SMB/Windows \"%s\""
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
+"- Daemon (%s) include:\n"
msgstr ""
"\n"
-"\n"
-"Mae eich cerdyn yn defnyddio'r gyrrwr %s\"%s\" ar hyn o bryd ( y gyrrwr "
-"arferol ar ei gyfer yw \"%s\")"
+"- Daemon (%s) i gynnwys :\n"
-#: ../../harddrake/sound.pm:1
+#: ../../modules/parameters.pm:1
+#, c-format
+msgid "%d comma separated numbers"
+msgstr "%d rhifau gwahanwyd gan gollnod"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
msgstr ""
-"Yma medrwch ddewis gyrrwr arall (un ai OSS neu ALSA) ar gyfer eich cerdyn "
-"sain (%s)"
+"Mae protocol ruser yn caniatĂĄu i ddefnyddwyr ar rwydwaith i adnabod\n"
+"pwy arall sydd wedi mewngofnodi ar beirianau eraill sy'n ymateb."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Sound configuration"
-msgstr "Furfweddiad sain"
+msgid "Automatic Steps Configuration"
+msgstr "FFurfweddiad Camau Awtomatig"
-#: ../../harddrake/sound.pm:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
msgstr ""
-"Nid oes gyrrwr OSS/ALSA arall hysbys ar gyfer eich cerdyn sain (%s) sy'n "
-"defnyddio \"%s\" ar hyn o bryd"
+"Hoffech chi wybod mwy am y gymuned Cod Agored? Ymunwch Ăą byd Meddalwedd "
+"Rhydd!"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No alternative driver"
-msgstr "Dim gyrwyr eraill"
+msgid "Barbados"
+msgstr "Barbados"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "enable radio support"
-msgstr "galluogi cynnal radio"
+msgid "Please select data to backup..."
+msgstr "Dewiswch y data i'w gadw wrth gefn..."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Radio support:"
-msgstr "Cynnal radio:"
+msgid ""
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
+msgstr ""
+"Methodd y cysylltiad.\n"
+"Gwiriwch eich ffurfweddiad yng Nghanolfan Rheoli Mandrake."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "PLL setting:"
-msgstr "Gosodiad PLL:"
+msgid "received"
+msgstr "derbyniwyd"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr "nifer o fyffers cipio ar gyfer cipio mmap"
+msgid "/File/_New"
+msgstr "/Ffeil/_Newydd"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Number of capture buffers:"
-msgstr "Nifer o fyffers cipio:"
+msgid "The DNS Server IP"
+msgstr "Y Gwasanaethwr DHCP IP"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Tuner type:"
-msgstr "Math o diwniwr"
+msgid "IP Range End:"
+msgstr "Diwedd Amrediad IP:"
-#: ../../harddrake/v4l.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Card model:"
-msgstr "Model cerdyn:"
+msgid "High"
+msgstr "Uchel"
-#: ../../harddrake/v4l.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
-"Ar gyfer y rhelyw o gardiau Teledu diweddar, mae modiwl bttv cnewyllyn GNU/"
-"Linux yn awto ganfod y paramedrau cywir.\n"
-"Os yw'ch cerdyn yn cael ei ganfod ar gam, mae modd gorfodi'r mathau cywir o "
-"gerdyn a rheolydd. Dewiswch baramedrau eich cerdyn teledu os oes raid"
+msgid "NoVideo"
+msgstr "NoVideo"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "this field describes the device"
+msgstr "Mae'r maes yn disgrifio'r ddyfais"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Unknown|Generic"
-msgstr "Anhysbys|Generig"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Ychwanegu argraffydd i Star Office/OpenOffice.org/GIMP"
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "Anhysbys|CPH06X (bt878) [nifer o werthwyr]"
+msgid "Local Printers"
+msgstr "Argraffyddion Lleol"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "Anhysbys|CPH05X (bt878) [nifer o werthwyr]"
+msgid "Installation image directory"
+msgstr "Cyfeiriadur delwedd gosod"
-#: ../../harddrake/v4l.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Auto-detect"
-msgstr "Awtoganfod"
+msgid "NIS Server"
+msgstr "Gwasanaethwr NIS"
-#: ../../interactive/newt.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Do"
-msgstr "Gwneud"
+msgid "Port: %s"
+msgstr "Porth: %s"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Eich dewis? (rhagosodedig %s)"
+msgid "Spain"
+msgstr "Sbaen"
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Dewis gwael, ceisiwch eto\n"
+msgid "This user name has already been added"
+msgstr "Mae'r enw defnyddiwr wedi ei ychwanegu yn barod"
-#: ../../interactive/stdio.pm:1
+#: ../../interactive.pm:1
#, c-format
-msgid "Re-submit"
-msgstr "Ail-gyflwyno"
+msgid "Choose a file"
+msgstr "Dewis ffeil"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=>Hysbysiad, mae label wedi newid:\n"
-"%s"
+msgid "Apply"
+msgstr "Gosod"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Dewiswch y rhif cyntaf o'r amrediad 10 rydych am ei olygu,\n"
-"neu wasgwch Enter i barhau.\n"
-"Eich dewis?"
+msgid "Auto-detect available ports"
+msgstr "Awtoganfod pyrth ar gael"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Mae yna lawer i ddewis o (%s).\n"
+msgid "Internet Connection Sharing currently disabled"
+msgstr "Mae Rhannu Cysylltiad a'r Rhyngrwyd wedi ei analluogi"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Eich dewis? (rhagosodedig `%s'%s) "
+msgid "San Marino"
+msgstr "San Marino"
-#: ../../interactive/stdio.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid " enter `void' for void entry"
-msgstr "rhowch'gwag' am gofnod gwag"
+msgid "Belgium"
+msgstr "Gwlad Belg"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to click on this button?"
-msgstr "Ydych chi eisiau clicio ar y botwm hwn?"
+msgid "Kuwait"
+msgstr "Kuwait"
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Button `%s': %s"
-msgstr "Botwm '%s'.%s"
+msgid "Choose the window manager to run:"
+msgstr "Dewiswch y rheolwr ffenestr i rhedeg:"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "sub generation of the cpu"
+msgstr "Is gynnyrch y cpu"
+
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Eich dewis? (0/1, rhagosodedig %s)"
+msgid "First Time Wizard"
+msgstr "Dewin Tro Cyntaf"
-#: ../../interactive/stdio.pm:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Entries you'll have to fill:\n"
-"%s"
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
msgstr ""
-"Gwybodaeth i'w gyflawyno:\n"
-"%s"
+"Digwyddodd gwall ond wn i ddim sut i ddelio ag ef yn dwt.\n"
+"Mae'n beryglus i barhau."
-#: ../../modules/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Methodd llwytho modiwl %s\n"
-"Hoffech chi drio eto gyda pharamedrau eraill?"
+msgid "please wait, parsing file: %s"
+msgstr "arhoswch, dosbarthu ffeil: %s"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Specify options"
-msgstr "Enwi dewisiadau"
+msgid "Taiwan"
+msgstr "Taiwan"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Autoprobe"
-msgstr "Atoholi"
+msgid "Pakistan"
+msgstr "Pacistan"
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
msgstr ""
-"Mewn rhai achosion, mae gyrrwr %s angen gwybodaeth ychwanegol i weithio'n\n"
-"gywir, er fel rheol mae'n gweithio'n iawn hebddo. Hoffech chi enwi'r "
-"dewisiadau\n"
-"ychwanegol ar ei gyfer neu adael i'r gyrrwr archwilio'r peiriant am y "
-"wybodaeth mae\n"
-"ei angen? Weithiau bydd yr archwilio'n atal y peiriant, ond ni ddylai achosi "
-"unrhyw\n"
-"ddifrod."
+"I fedru argraffu gyda eich argraffydd inkjet Lexmark a'r ffurfweddiad hwn, "
+"bydd angen gyrwyr argraffydd inkjet sydd wedi eu darparu gan Lexmark (http://"
+"www.lexmark.com/). Ewch i'w safle yn yr UDA a chliciwch ar y botwm \"Drivers"
+"\". Yna dewiswch eich model ac yna \"Linux\" fel system weithredu. Mae'r "
+"gyrwyr yn dod fel pecynnau RPM neu sgriptiau cragen gyda gosodiad graffigol "
+"rhyngweithiol. Nid oes angen i chi wneud y ffurfweddiad drwy'r wyneb "
+"graffigol. Diddymwch yn syth wedi'r cytundeb trwyddedu. Yna argraffwch "
+"dudalennau'r alinio'r pen argraffu gyda \"lexmarkmaintain\" a newid "
+"gosodiadau aliniad y pen gyda'r rhaglen."
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Pa yrrwr %s ddylwn drio?"
+msgid "Permissions"
+msgstr "Caniatadau"
-#: ../../modules/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Module options:"
-msgstr "Dewisiadau modiwl:"
+msgid "Provider name (ex provider.net)"
+msgstr "Enw darparwr (eng. darparwr.net)"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Medrwch nawr ei ddewis i fodiwl. %s.\n"
-"Mae'r dewisiadau yn fformat ``name=value name2=value2 ...''.\n"
-"e.e, ``io=0x300 irq=7''"
+msgid "Version: %s\n"
+msgstr "Fersiwn: %s\n"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
-"Medrwch ddarparu ddewisiadau i fodiwl %s.\n"
-"Sylwer: wrth greu unrhyw gyfeiriad bydd angen defnyddio rhagddodiad 0x, e.e. "
-"'0x123'"
+"Mae eich system yn brin o adnoddau. Efallai y cewch anhawsterau wrth osod\n"
+"Mandrake Linux. Os bydd hynny'n digwydd, gallwch geisio gwneud gosodiad\n"
+"testunol. I wneud hynny, gwasgwch F1 wrth gychwyn ar y CD-ROM ac yna rhoi "
+"'text'."
-#: ../../modules/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "(module %s)"
-msgstr "(modiwl %s)"
+msgid "Use the Windows partition for loopback"
+msgstr "Defnyddiwch raniad Windows ar gyfer cylch-ĂŽl"
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Gosod gyrrwr %s ar gyfer cerdyn %s "
+msgid "Armenian (typewriter)"
+msgstr "Armenaidd (teipiadur)"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "See hardware info"
-msgstr "Gweler gwybodaeth am galedwedd"
+msgid "Connection type: "
+msgstr "Math o gyswllt:"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Oes gennych unrhyw rhyngwyneb %s?"
+msgid "Graphical interface"
+msgstr "Rhyngwyneb graffigol"
-#: ../../modules/interactive.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Do you have another one?"
-msgstr "Oes gennych un arall?"
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s gyda cyflymu caledwedd 3D"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Wedi canfod rhyngwynebau %s %s"
+msgid "India"
+msgstr "India"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "Mae modd i chi ffurfweddu pob paramedr o'r modiwl yma"
+msgid "Chad"
+msgstr "Chad"
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "comma separated strings"
-msgstr "llinellau collnod ranedig"
+msgid "Slovakia"
+msgstr "Slofacia"
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "comma separated numbers"
-msgstr "rhifau gwahanwyd gan gollnod"
+msgid "Singapore"
+msgstr "Singapore"
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "%d comma separated strings"
-msgstr "%d llinellau gwahanwyd gan gollnod"
+msgid "Cambodia"
+msgstr "Cambodia"
-#: ../../modules/parameters.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d rhifau gwahanwyd gan gollnod"
+msgid "Monitor HorizSync: %s\n"
+msgstr "HorizSync Monitor: %s\n"
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "a number"
-msgstr "rhif"
+msgid "Path"
+msgstr "Llwybr"
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
msgstr ""
-"Rahaid cael minicode Alcatel.\n"
-"Llwytho i lawr o\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"achopio'r mgmt.o i /usr/share/speedtouch"
+"Yma medrwch bennu unrhyw fan lle dylid cyfeirio'r gwaith yn lle ei anfon at "
+"yr argraffydd."
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
msgstr ""
-"Y ffordd mwyaf cyffredin i gysylltu Ăą adsl yw pppoe\n"
-"Mae rhai cysylltiadau'n defnyddio pptp, a rhai dhcp.\n"
-"Os nad ydych yn gwybod pa un, dewiswch 'pppoe'."
+"Ni fydd system argraffu (%s) yn cychwyn yn awtomatig pan fydd y peiriant yn "
+"cael ei gychwyn.\n"
+"\n"
+"Mae'n bosibl fod y cychwyn awtomatig wedi ei ddiffodd wrth newid i lefel "
+"diogelwch uwch, am fod a system argraffu'n bwynt tebygol ar gyfer "
+"ymosodiadau.\n"
+"\n"
+"Ydych chi am i'r cychwyn awtomatig gael ei droi ymlaen eto?"
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Connect to the Internet"
-msgstr "Cysylltu Ăą'r We"
+msgid ""
+"Printer %s\n"
+"What do you want to modify on this printer?"
+msgstr ""
+"Argraffydd %s\n"
+"Beth ydych am ei newid ar yr argraffydd hwn?"
-#: ../../network/adsl.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Sagem (using pppoa) usb"
-msgstr "USB Sagem (defnyddio pppoa)"
+msgid "Add host"
+msgstr "Ychwanegu gwesteiwr"
-#: ../../network/adsl.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Alcatel speedtouch usb"
-msgstr "usb Alcatel Speedtouch"
+msgid ""
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
+"\n"
+"The current driver for your \"%s\" sound card is \"%s\" "
+msgstr ""
+"Os ydych yn siwr eich bod yn gwybod pa yrrwr sydd angen ar gyfer eich\n"
+"cerdyn yna dewiswch un o'r rhestr uchod\n"
+"\n"
+"Y gyrrwr presennol ar gyfer eich cerdyn \"%s\" yw \"%s\" "
-#: ../../network/adsl.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "use dhcp"
-msgstr "defnyddiwch dhccp"
+msgid ""
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
+"\n"
+"\"Custom\" permit a per-user granularity.\n"
+msgstr ""
+"Hoffech chi ganiatĂĄu i rai defnyddwyr rannu eu cyfeiriaduron?\n"
+"Bydd caniatĂĄu hyn yn gadael i ddefnyddwyr glicio ar \"Rhannu\" yn konqueror "
+"a nautilus.\n"
+"\n"
+"\"Addasu\" caniatĂĄu cyfran i'r defnyddwyr.\n"
-#: ../../network/adsl.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "use pptp"
-msgstr "defnyddiwch pptp"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
+msgstr ""
+"Dewiswch llwytho neu ddewis cadw pecyn ar ddisg meddal.\n"
+"Mae'r fformat yr un ar ddisgiau meddal wedi eu cynhyrchu drwy auto_install."
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "use pppoe"
-msgstr "defnyddiwch pppoe"
+msgid "China (broadcast)"
+msgstr "Tseina (darlledu)"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Other ports"
-msgstr "Pyrth eraill"
+msgid "Use quota for backup files."
+msgstr "Defnyddiwch y cwota ar gyfer ffeiliau wrth gefn"
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Everything (no firewall)"
-msgstr "Popeth (dim mur cadarn)"
+msgid "Configuring printer \"%s\"..."
+msgstr "Ffurfweddu argraffydd \"%s\" ..."
-#: ../../network/drakfirewall.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
-msgstr ""
-"Porth annilys wedi ei gynnig: %s.\n"
-"Y fformat cywir yw \"port/tcp\" neu \"port/udp\", \n"
-"lle mae porth rhwng 1 a 65535."
+msgid "Internet connection"
+msgstr "Cysylltiad Ăą'r Rhyngrwyd"
-#: ../../network/drakfirewall.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
msgstr ""
-"Medrwch roi amrywiol byrth.\n"
-"Eng. dilys: 139/tcp 139/udp.\n"
-"Am wybodaeth ewch i /etc/services."
+"Methodd llwytho modiwl %s\n"
+"Hoffech chi drio eto gyda pharamedrau eraill?"
-#: ../../network/drakfirewall.pm:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr "Pa wasanaethau'r hoffech i'r Rhyngrwyd gysylltu Ăą hwy?"
+msgid "Welcome to the Open Source world."
+msgstr "Croeso i fyd Cod Agored"
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-"Ffurfweddwr Drakfirewall\n"
-"\n"
-"Gwnewch yn siwr eich bod wedi ffurfweddu eich mynediad\n"
-"Rhwydwaith/Rhyngrwyd gyda Drakconnect cyn mynd ymhellach."
+msgid "Bosnia and Herzegovina"
+msgstr "Bosnia ac Herzegovina"
-#: ../../network/drakfirewall.pm:1
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
msgstr ""
-"ffurfweddiadur drakfirewall\n"
-"\n"
-"Mae hwn yn ffurfweddu mur gwarchod personol ar gyfer y peiriant \n"
-"Mandrake Linux hwn. Am fur gwarchod pwrpasol pwerus, \n"
-"edrychwch ddosbarthiad arbennigol MandrakeSecurity Firewall."
+"Mae angen gwir system ffeilio (ext2, reiserfs, xfs, neu jfs)) ar gyfer y "
+"pwynt gosod\n"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "No network card"
-msgstr "Dim cerdyn rhwydwaith"
+msgid "You must enter a host name or an IP address.\n"
+msgstr "Rhowch enw'r gwesteiwr neu'r cyfeiriad IP.\n"
-#: ../../network/drakfirewall.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "POP and IMAP Server"
-msgstr "Gwasanaethwr POP ac IMAP"
+msgid "Netherlands"
+msgstr "Yr Iseldiroedd"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "Anfon ffeiliau..."
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Mail Server"
-msgstr "Gwasanaethwr E-bost"
+msgid "Internal ISDN card"
+msgstr "Cerdyn ISDN mewnol"
-#: ../../network/drakfirewall.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Domain Name Server"
-msgstr "Gwasanaethwr Enw Parth"
+msgid ""
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
+msgstr ""
+"Nid oes gyrrwr OSS/ALSA arall hysbys ar gyfer eich cerdyn sain (%s) sy'n "
+"defnyddio \"%s\" ar hyn o bryd"
-#: ../../network/drakfirewall.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Web Server"
-msgstr "Gwasanaethwr Gwe"
+msgid "Title"
+msgstr "Teitl"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr "Rhaid i enw gwesteiwr Zeroconf beidio cynnwys ."
+msgid "Install & convert Fonts"
+msgstr "Gosod a throsi ffontiau"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Host name"
-msgstr "Enw gwesteiwr"
+msgid "WARNING"
+msgstr "RHYBUDD"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Zeroconf Host name"
-msgstr "Enw Gwesteiwr Zeroconf"
+msgid "Installing bootloader"
+msgstr "Gosod cychwynnydd"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
-msgstr ""
-"\n"
-"\n"
-"Rhowch enw gwesteiwr Zeroconf heb ddot os nad ydych\n"
-"am ddefnyddio'r enw gwesteiwr rhagosodedig."
+msgid "replay"
+msgstr "ail chwarae"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Configuring network"
-msgstr "Ffurfweddu'r rhwydwaith"
+msgid "detected %s"
+msgstr "canfyddwyd %s"
-#: ../../network/ethernet.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
-msgstr ""
-"Dewiswch pa addaswr rhwydwaith hoffech ei ddefnyddio i gysylltu Ăą'r Rhyngrwyd"
+msgid "Virgin Islands (U.S.)"
+msgstr "Virgin Islands (U.S.)"
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Choose the network interface"
-msgstr "Dewiswch rhag wyneb y rhwydwaith"
+msgid "Bad backup file"
+msgstr "Ffeil wrth gefn gwallus"
-#: ../../network/ethernet.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"Nid oes addasydd rhwydwaith ethernet wedi ei ganfod ar eich system.\n"
-"Nid wyf yn medru gosod y math yma o gysylltiad."
+"Mae gosodiad rhannu cysylltiad a'r Rhyngrwyd wedi ei gyflawni. \n"
+"Mae wedi ei analluogi. \n"
+"\n"
+"Beth hoffech ei wneud?"
-#: ../../network/ethernet.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
+msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""
-"Pa gleient dhcp ydych chi eisiau ei ddefnyddio?\n"
-"dhcp-client yw'r rhagosodedig"
+"Rhowch gyfeiriad IP a porth gwesteiwr yr argraffydd rydych am ei ddefnyddio."
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Heb ganfod cerdyn PCI ISDN. Dewiswch un o'r sgrĂźn nesaf."
+msgid "Pipe into command"
+msgstr "Peipio i orchymyn"
-#: ../../network/isdn.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
msgstr ""
-"Rwyf wedi canfod cerdyn IDSN, ond nid wyf yn gwybod pa fath. Dewiswch un "
-"cerdyn PCI ar y sgrĂźn nesaf."
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Pa un o'r canlynol yw eich cerdyn IDSN?"
+"Mae peth caledwedd ar eich cyfrifiadur angen gyrwyr \"priodol\" i weithio.\n"
+"Mae rhywfaint o wybodaeth i'w gael amdanynt yn %s"
-#: ../../network/isdn.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "ISDN Configuration"
-msgstr "Ffurfweddiad ISDN"
+msgid "Detecting devices..."
+msgstr "Canfod dyfeisiau..."
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Abort"
-msgstr "Peidio"
+msgid "Click here to launch the wizard ->"
+msgstr "Cliciwch yma i gychwyn y dewin ->"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Continue"
-msgstr "Parhau"
+msgid "Haiti"
+msgstr "Haiti"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
+"Description of the fields:\n"
"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
msgstr ""
+"Disgrifiad y meysydd:\n"
"\n"
-"Os oes gennych gerdyn, dylai'r gwerthoedd ar y sgrĂźn nesaf fod yn gywir.\n"
-"\n"
-"Os oes gennych gerdyn PCMCIA, rhaid i chi wybod irq ac io eich cerdyn.\n"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "I don't know"
-msgstr "Dim syniad"
-
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "PCI"
-msgstr "PCI"
+msgid "the name of the CPU"
+msgstr "enw'r prosesydd"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "Refreshing printer data..."
+msgstr "Adnewyddu data'r argraffydd..."
-#: ../../network/isdn.pm:1
+#: ../../install2.pm:1
#, c-format
-msgid "What kind of card do you have?"
-msgstr "Pa fath o gerdyn sydd gennych?"
+msgid "You must also format %s"
+msgstr "Rhaid fformatio %s hefyd"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr "Wedi canfod rhyngwyneb \"%s\", hoffech chi ei ddefnyddio?"
+msgid "Be careful: this operation is dangerous."
+msgstr "Byddwch ofalus: mae'r weithred hon yn beryglus."
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Pa brotocol ydych chi eisiau ei ddefnyddio?"
+msgid "Insert a floppy containing package selection"
+msgstr "Rhowch ddisg meddal yn cynnwys dewis pecynnau yn y peiriant"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Protocol ar gyfer gweddill y byd"
+msgid "Server: "
+msgstr "Gwasanaethwr:"
-#: ../../network/isdn.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-"Protocol ar gyfer gweddill y byd\n"
-" dim D-Channel (llinell les)"
+msgid "Security Alerts:"
+msgstr "Rhybuddion Diogelwch:"
-#: ../../network/isdn.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "European protocol"
-msgstr "Protocol Ewropeaidd"
+msgid "Sweden"
+msgstr "Sweden"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Protocol Ewropeaidd (EDSSI)"
+msgid "Use Expect for SSH"
+msgstr "Defnyddiwch Expect ar gyfer SSH"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
-msgstr ""
-"Dewiswch eich darparwr.\n"
-"Os nad yw ar eich rhestr, dewiswch Heb ei Restri"
+msgid "Poland"
+msgstr "Gwlad Pwyl"
-#: ../../network/isdn.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "External ISDN modem"
-msgstr "Modem IDSN Allanol"
+msgid "Importance: %s\n"
+msgstr "Pwysigrwydd: %s\n"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Internal ISDN card"
-msgstr "Cerdyn ISDN mewnol"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr "Gwiriwch os ydych am dynnu eich tĂąp ar ĂŽl y cadw wrth gefn."
-#: ../../network/isdn.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "Pa fath o gysylltiad IDSN?"
+msgid "Other ports"
+msgstr "Pyrth eraill"
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Network Configuration Wizard"
-msgstr "Dewin Ffurfweddu'r Rhwydwaith"
+msgid "number of capture buffers for mmap'ed capture"
+msgstr "nifer o fyffers cipio ar gyfer cipio mmap"
-#: ../../network/isdn.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "Hen ffurfweddiad (isdn4net)"
+msgid "SMBus controllers"
+msgstr "Rheolyddion SMBus"
-#: ../../network/isdn.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "New configuration (isdn-light)"
-msgstr "Ffurfweddiad newydd (isdn-light)"
+msgid "Connection timeout (in sec)"
+msgstr "Oediad yn y cysylltiad (mewn eiliadau)"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
msgstr ""
-"Pa ffurfweddiad IDSN sy'n well gennych?\n"
-"\n"
-"* Mae'r Hen ffurfweddiad yn defnyddio isdn4net. Mae'n\n"
-" cynnwys offer pwerus ond mae'n anodd ei ffurfweddi ac nid\n"
-"yw'n safonol. \n"
-"\n"
-" *Mae'r ffurfweddiad Newydd yn haws i'w ddeall, yn fwy safonol\n"
-" ond mae ganddo llai o offer.\n"
-"\n"
-"Rydym yn argymell y ffurfweddiad ysgafn.\n"
+"Nid yw rhai prosesyddion i486DX-100 cynnar yn medru dychwelyd i'w cyflwr "
+"gweithredu a'r oĂŽ defnyddio \"halt\""
-#: ../../network/modem.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do nothing"
-msgstr "Gwneud dim"
+msgid "Croatian"
+msgstr "Croataidd"
-#: ../../network/modem.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Use existing partition"
+msgstr "Defnyddiwch y rhaniadau cyfredol"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Install rpm"
-msgstr "Gosod rpm"
+msgid "Unable to contact mirror %s"
+msgstr "Methu canfod drych: %s."
-#: ../../network/modem.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
-msgstr ""
-"Wedi canfod winmodem \"%s\" , hoffech chi osod y feddalwedd angenrheidiol?"
+msgid "/Help/_About..."
+msgstr "/Cymorth/_Ynghylch..."
-#: ../../network/modem.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Title"
-msgstr "Teitl"
+msgid "Remove user directories before restore."
+msgstr "Tynnu cyfeiriaduron defnyddiwr cyn adfer."
-#: ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
msgstr ""
-"Nid yw'r system yn cynnal eich modem.\n"
-"Ewch i http://www.linmodems.org"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Ail Wasanaethwr DNS (dewisol)"
+"Ydych chi am ffurfweddi argraffydd pell. Mae hyn angen mynediad ar "
+"rwydwaith, ond nid yw eich rhwydwaith wedi ei ffurfweddu eto. Os ydych am "
+"fynd ymlaen heb ffurfweddiad rhwydwaith, ni bydd modd i chi ddefnyddio'r "
+"argraffydd rydych yn ei ffurfweddu ar hyn o bryd. Beth ydych am ei wneud?"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Gwasanaethwr DNS Cyntaf (dewisol)"
+msgid "CUPS printer configuration"
+msgstr "Ffurfweddiad argraffydd CUPS "
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Domain name"
-msgstr "Enw parth"
+msgid "could not find any font in your mounted partitions"
+msgstr "methu canfod unrhyw ffont yn eich rhaniad gosodedig"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "CHAP"
-msgstr "CHAP"
+msgid "F00f bug"
+msgstr "Gwall F00f"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Script-based"
-msgstr "Seiliedig ar sgript"
+msgid "XFree %s"
+msgstr "XFree: %s"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Terminal-based"
-msgstr "Seiliedig ar derfynnell"
+msgid ""
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
+msgstr ""
+"Pa gleient dhcp ydych chi eisiau ei ddefnyddio?\n"
+"dhcp-client yw'r rhagosodedig"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid "Domain Name:"
+msgstr "Enw Parth:"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "Login ID"
-msgstr "Dynodiad Mewngofnodi"
+msgid "On Floppy"
+msgstr "Ar Ddisg Meddal"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Phone number"
-msgstr "Rhif ffĂŽn"
+msgid "Restore"
+msgstr "Adfer"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Connection name"
-msgstr "Enw'r cysylltiad"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
+msgstr ""
+"os wedi ei osod i iawn, gwirio os yw'r dyfeisiau rhwydwaith mewn modd cymysg"
-#: ../../network/modem.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Dialup options"
-msgstr "Dewisiadau cyswllt ffĂŽn"
+msgid "Looking for available packages..."
+msgstr "Chwilio am y pecynnau sydd ar gael"
-#: ../../network/modem.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Dewiswch ba borth cyfresol mae eich modem wedi cysylltu iddo."
+msgid "Init Message"
+msgstr "Neges Init"
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Network Configuration"
-msgstr "Ffurfweddiad y Rhwydwaith"
+msgid "Rescue partition table"
+msgstr "Achub y tabl rhaniadau"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
-msgstr ""
-"Digwyddod anhawsterau yn ystod y ffurfweddiad.\n"
-"Profwch eich cysylltiad drwy net_monitor neu mcc. Os nad yw eich cysylltiad "
-"yn gweithio, efallai y byddwch eisiau ailgychwyn y ffurfweddiad"
+msgid "Connection complete."
+msgstr "Cysylltiad wedi ei gwblhau"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Wedi i hyn gael ei wneud rydym yn argymell eich bod yn a'i gychwyn "
-"amgylchedd X i osgoi unrhyw anawsterau'n perthyn i enwau gwesteiwr.\n"
-"."
+msgid "Cyprus"
+msgstr "Cyprus"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Llongyfarchiadau, mae ffurfweddiad y rhwydwaith a'r Rhyngrwyd wedi gorffen\n"
-"Bydd y ffurfweddiad yn cael ei osod ar eich system\n"
-"\n"
+msgid "Remove from RAID"
+msgstr "Tynnu o RAID"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
+msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr ""
-"Digwyddodd gwall wrth ail gychwyn y rhwydwaith:\n"
-"\n"
-"%s"
+"Mae'r allwedd amgryptio'n rhy syml (mae'n rhaid bod o leiaf %d nod o hyd)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr "Rhaid i'r rhwydwaith gael ei ailgychwyn. Ydych chi am ei ailgychwyn?"
+msgid "Configuration Wizards"
+msgstr "Dewin Ffurfweddu"
#: ../../network/netconnect.pm:1
#, c-format
-msgid "Network configuration"
-msgstr "Ffurfweddiad y rhwydwaith"
+msgid "ISDN connection"
+msgstr "Cysylltiad ISDN"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Ydych chi eisiau agor y cysylltiad wrth gychwyn y cyfrifiadur?"
+msgid "primary"
+msgstr "cynradd"
-#: ../../network/netconnect.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Internet connection"
-msgstr "Cysylltiad Ăą'r Rhyngrwyd"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr "ar wasanaethwr SMB/Windows \"%s\", rhannu \"%s\""
-#: ../../network/netconnect.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
+"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
+"\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
msgstr ""
-"Rydych wedi ffurfweddu nifer o ffyrdd i gysylltu Ăą'r Rhyngrwyd.\n"
-"Dewiswch ba un rydych am ei ddefnyddio.\n"
+"Dewiswch pa wasanaethau rydych am eu cael wrth gychwyn eich cyfrifiadur.\n"
+"\n"
+"Bydd DrakX yn rhestri'r holl wasanaethau sydd ar gael gyda'r gosodiad "
+"cyfredol.\n"
+"Darllenwch y rhestr yn ofalus a dad-diciwch y rhai nad oes eu hangen bob "
+"tro\n"
+"wrth gychwyn.\n"
"\n"
+"Mae modd cael esboniad byr am wasanaeth wrth eu dewis. Ond, os nad ydych\n"
+"yn siwr a yw'r gwasanaeth o werth neu beidio, mae'n well cadw at y drefn\n"
+"rhagosodedig\n"
+"\n"
+"!!Byddwch yn ofalus iawn os ydych am ddefnyddio eich peiriant fel "
+"gwasanaethwr:\n"
+"mwy na thebyg na fyddwch eisiau cychwyn unrhyw wasanaethau nad oes eu\n"
+"hangen. Cofiwch fod cael nifer o wasanaethau wedi eu galluogi ar y "
+"gwasanaethwr,\n"
+"fod yn beryglus. Yn gyffredinol, dim ond dewis y gwasanaethau mae'n rhaid eu "
+"cael.\n"
+"!!"
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Dewiiwch y math o gysylltiad rydych am ei ffurfweddu"
+msgid "Skip"
+msgstr "Hepgor"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "ethernet card(s) detected"
-msgstr "cerdyn ethernet wedi ei ganfod"
+msgid "Niue"
+msgstr "Niue"
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "LAN connection"
-msgstr "cysylltiad LAN"
+msgid ""
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
+msgstr ""
+"Cychwyn/Gorffen pob rhyngwyneb rhwydwaith sydd wedi eu \n"
+"ffurfweddu i gychwyn wrth gychwyn y peiriant."
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "cable connection detected"
-msgstr "canfyddwyd cysylltiad cebl"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid ""
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
+msgstr "Amledd y cpu mewn MHz (y nifer o gyfarwyddiadau'r eiliad)"
-#: ../../network/netconnect.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Cable connection"
-msgstr "Cysylltiad cebl"
+msgid "important"
+msgstr "pwysig"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "detected"
-msgstr "canfuwyd"
+msgid "Total Progress"
+msgstr "Cyfanswm Cynydd"
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "ADSL connection"
-msgstr "Cysylltiad ADSL"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
+"\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
+"\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
+"\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
+msgstr ""
+"Bydd DrakX yn canfod unrhyw ddyfais IDE sydd ar eich cyfrifiadur. Bydd yn\n"
+"chwilio am un neu fwy o gardiau SCSI PCI ar eich system. Os oes Cerdyn\n"
+"SCSI'n cael ei ganfod bydd DrakX yn awtomatig yn gosod y gyrrwr priodol.\n"
+"\n"
+"Oherwydd nad yw canfod caledwedd bob tro'n canfod darn o galedwedd,\n"
+"gall DrakX fethu canfod eich dsgiau caled. Os felly, bydd rhaid i chi bennu\n"
+"eich caledwedd Ăą llaw.\n"
+"Os ydych wedi pennu eich addaswr PCI SCS gyda llaw, bydd DrakX yn\n"
+"gofyn i chi ydych am bennu dewisiadau ar ei gyfer. Dylech adael i DrakX "
+"ofyn\n"
+"i'r cerdyn am ddewisiadau penodol i'r cerdyn mae angen i'r caledwedd eu\n"
+"cychwyn. Mae hyn fel rheol yn gweithio'n dda\n"
+"\n"
+"Os nad yw DrakX yn medru holi am y dewisiadau sydd eu hangen, bydd rhaid i\n"
+" chi ffurfweddu'r gyrrwr gyda llaw. "
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "detected %s"
-msgstr "canfyddwyd %s"
+msgid "Users"
+msgstr "Defnyddwyr"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "ISDN connection"
-msgstr "Cysylltiad ISDN"
+msgid "Aruba"
+msgstr "Aruba"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Winmodem connection"
-msgstr "Cysylltiad Winmodem l"
+msgid "Preparing bootloader..."
+msgstr "Paratoi cychwynnydd"
-#: ../../network/netconnect.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "detected on port %s"
-msgstr "canfyddwyd ar borth %s"
+msgid "Gateway (e.g. %s)"
+msgstr "Mynedfa (e.e. %s)"
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Normal modem connection"
-msgstr "Cysylltiad modem arferol"
+msgid "The passwords do not match"
+msgstr "Nid yw'r cyfrineiriau'n cydfynd"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detecting devices..."
-msgstr "Canfod dyfeisiau..."
+msgid "Examples for correct IPs:\n"
+msgstr "Esiamplau cywir ar gyfer IP:\n"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Expert Mode"
-msgstr "Modd Uwch"
+msgid "Frequency (MHz)"
+msgstr "Amledd (MHz)"
-#: ../../network/netconnect.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Use auto detection"
-msgstr "Defnyddio awto ganfod"
+msgid ""
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
+msgstr ""
+"I ddefnyddio'r dewis o becynnau wedi eu cadw, cychwynnwch y gosodiad gyda "
+"``linux defcfg=floppy''"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Choose the profile to configure"
-msgstr "Dewiswch broffil i'w ffurfweddu"
+msgid "the number of the processor"
+msgstr "rhif y prosesydd"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Croeso i Ddewin Ffurfweddu'r Rhwydwaith\n"
-"\n"
-"Rydym ar fin ffurfweddi eich cysylltiad rhyngrwyd/rhwydwaith.\n"
-"Os nad ydych am ddefnyddio awto ganfod, dad-diciwch y blwch dewis.\n"
+msgid "Hardware clock set to GMT"
+msgstr "Cloc caledwedd wedi ei osod i GMT"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Am eich bod yn gosod eich rhwydwaith, mae eich rhwydwaith eisoes wedi ei "
-"ffurfweddu\n"
-"Cliciwch Iawn i gadw eich ffurfweddiad, neu ddileu i ail ffurfweddi eich "
-"cysylltiad Rhyngrwyd a Rhwydwaith.\n"
+msgid "Give a file name"
+msgstr "Rhowch enw ffeil"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Rydym yn awr yn mynd i ffurfweddu cysylltiad %s.\n"
-"\n"
-"\n"
-"Pwyswch Iawn i barhau."
+msgid "Please choose the port that your printer is connected to."
+msgstr "Dewiswch y porth mae'r argraffydd wedi cysylltu iddo."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Rydym am ffurfweddu cysylltiad %s"
+msgid "Change Cd-Rom"
+msgstr "Newid CD-Rom"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet connection & configuration"
-msgstr "Cysylltiad Ăą'r rhyngrwyd a'i ffurfweddiad "
+msgid "Paraguay"
+msgstr "Paraguay"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
+msgstr "Defnyddio Cadw wrth Gefn Cynyddol (peidio disodli hen gadw wrth gefn)"
+
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Configure the connection"
-msgstr "Ffurfweddu'r gysylltiad"
+msgid "There's no known driver for your sound card (%s)"
+msgstr "Nid oes gyrrwr hysbys ar gyfer eich cerdyn sain (%s)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Disconnect"
-msgstr "Dadgysylltu"
+msgid "force"
+msgstr "grym"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Connect"
-msgstr "Cysylltu"
+msgid "Exit"
+msgstr "Gadael"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\n"
-"You can reconfigure your connection."
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
msgstr ""
-"\n"
-"Medrwch ailffurfweddu eich cysylltiad"
+"NODYN: Yn dibynnu ar yr argraffydd a'r system argraffu bydd hyd at %d MB o "
+"feddalwedd ychwanegol yn cael ei osod."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
msgstr ""
-"\n"
-"Medrwch gysylltu Ăą'r Rhyngrwyd neu ailffurfweddu eich cyswllt"
+"Nid oes gennych unrhyw rhagwynebau wedi\n"
+"eu ffurfweddio. Ffurfweddwch nhw'n gyntaf\n"
+"drwy glicio ar 'Ffurfweddu'"
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "Nid ydych wedi eich cysylltu Ăą'r Rhyngrwyd."
+msgid "Estonian"
+msgstr "Estonaidd"
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""
-"\n"
-"Medrwch ddatgysylltu neu ailffurfweddu eich cyswllt"
+"Mae Apache yn wasanaethwr y We Fyd Eang. Mae'n cael ei ddefnyddio "
+"iwasanaethu ffeiliau HTML a CGI."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "You are currently connected to the Internet."
-msgstr "Rydych wedi eich cysylltu Ăą'r Rhyngrwyd."
+msgid "Add/Del Clients"
+msgstr "Ychwanegu/Dileu Cleientiaid"
-#: ../../network/network.pm:1
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "Dylai'r URL ddechrau gyda 'ftp' neu 'http:'"
+msgid "Choose the network interface"
+msgstr "Dewiswch rhag wyneb y rhwydwaith"
-#: ../../network/network.pm:1
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Proxy should be http://..."
-msgstr "Dylai dirprwyon fod yn gyfanrif!"
+msgid "Unknown Model"
+msgstr "Model anhysbys"
-#: ../../network/network.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "FTP proxy"
-msgstr "Dirprwy FTP"
+msgid "CD/DVD burners"
+msgstr "Llosgwyr CD/DVD"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "HTTP proxy"
-msgstr "Dirprwy HTTP"
+msgid ""
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"Cychwyn y rhaniad fel rhagosodwyd\n"
+" (ar gyfer cychwyn MS-DOS, nid ar gyfer lilo)\n"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Proxies configuration"
-msgstr "Ffurfweddiad dirprwyon"
+msgid "choose image"
+msgstr "dewis ymyl"
-#: ../../network/network.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "Dylai cyfeiriad Porth fod mewn fformat 1.2.3.4"
+msgid "Firewalling configuration detected!"
+msgstr "Wedi canfod ffurfweddiad mur gwarchod!"
-#: ../../network/network.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "Dylai cyfeiriad DNS fod mewn fformat 1.2.3.4"
+msgid "Connection name"
+msgstr "Enw'r cysylltiad"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Gateway device"
-msgstr "Dyfais mynedfa"
+msgid ""
+"x coordinate of text box\n"
+"in number of characters"
+msgstr ""
+"blwch testun cydfesuryn x\n"
+"mewn rhif nodau"
-#: ../../network/network.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Mynedfa (e.e. %s)"
+msgid "Updating package selection"
+msgstr "Diweddaru'r dewis pecynnau"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DNS server"
-msgstr "Gwasanaethwr DNS"
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "Lle'r hoffech chi osod y ffeil cylch-ol %s?"
-#: ../../network/network.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
msgstr ""
-"Rhowch eich enw gwesteiwr.\n"
-"Dylai eich enw gwesteiwr fod yn enw gwesteiwr llawn gymwys.\n"
-"megis \"fymlwch.fynesg.fyngho.com\".\n"
-"Medrwch hefyd gynnig eich cyfeiriad IP os oes gennych un"
+"Mae'r disg meddal wedi ei gynhyrchu'n llwyddiannus. \n"
+"Medrwch ail chwarae eich gosodiad."
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
-"Dylai'r raddfa gael rhagosodiad K, M neu G (e.e.\"11M\" am 11M), neu "
-"ychwanegi '0' (sero)."
+msgid "the number of buttons the mouse has"
+msgstr "nifer y botymau sydd gan y llygoden"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
msgstr ""
-"Dylai Frqu gael rhagosodiad k, M neu G (ee \"2.46G\" am donfedd 2.46 GHz ), "
-"neu ychwanegu '0' (sero)."
-
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "dylai cyfeiriad IP fod mewn fformat 1.2.3.4"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Start at boot"
-msgstr "Cychwyn y peiriant"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Rhowch enw'r gwesteiwr o'r cyfeiriad DHCP"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Network Hotplugging"
-msgstr "Plygiobyw'rRhwydwaith"
+"Rhowch y cyfeiriadur(neu fodiwl) i osod y cadw\n"
+"wrth gefn ar y gwesteiwr hwn."
-#: ../../network/network.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "Dilynnwch cyfernod cerdyn rhwydwaith (defnyddiol ar gyfer gliniadur)"
+msgid "Replay"
+msgstr "Ail chwarae"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "DHCP host name"
-msgstr "Enw gwesteiwr DHCP"
+msgid "Backup other files"
+msgstr "Cadw'r ffeiliau eraill wrth gefn"
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Netmask"
-msgstr "Netmask"
+msgid "No floppy drive available"
+msgstr "Does dim gyrrwr disg meddal ar gael"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "IP address"
-msgstr "Cyfeiriad IP"
+msgid "Backup files are corrupted"
+msgstr "Mae'r ffeiliau wrth gefn wedi eu llygru"
-#: ../../network/network.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp/zeroconf)"
+msgid "TV norm:"
+msgstr "Safon Teledu:"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Automatic IP"
-msgstr "IP awtomatig"
+msgid "Cpuid family"
+msgstr "Teulu cpuid"
-#: ../../network/network.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid " (driver %s)"
-msgstr " (gyrrwr %s)"
+msgid "32 MB"
+msgstr "32 MB"
-#: ../../network/network.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configuring network device %s"
-msgstr "Ffurfweddu dyfais rhwydwaith %s"
+msgid "Lithuanian AZERTY (new)"
+msgstr "Lithuenaidd AZERTY (newydd)"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
msgstr ""
-"Rhowch ffurfweddiad IP ar gyfer y peiriant hwn\n"
-"Dylai pob eitem ei roi fel cyfeiriad IP nodiant collnod degymol\n"
-"(e.e.1.2.3.4)."
+"mae iawn yn golygu fod gan y cydbrosesydd fector eithriad yn gysylltiaedig"
-#: ../../network/network.pm:1
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
msgstr ""
-"Rhybudd!! Cafodd y ddyfais hon ei ffurfweddu o'r blaen i gysylltu Ăą'r "
-"Rhyngrwyd.\n"
-"Derbyniwch y cynnig i gadw'r ddyfais wedi ei ffurfweddi.\n"
-"Bydd newid y meysydd islaw'n newid y ffurfweddiad."
+"Rydych wedi dewis meddalwedd rhannu RAID fel gwraidd (/)\n"
+"Nid oes cychwynnydd yn medru trin hwn heb rhaniad /boot\n"
+"Cofiwch ychwanegu rhaniad /boot"
-#: ../../network/shorewall.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
-msgstr ""
-"Rhybudd! Mae ffurfweddiad mur gwarchod wedi ei ganfod. Efallai bydd angen "
-"atgyweirio gyda llaw ar ĂŽl y gosodiad."
+msgid "Previous"
+msgstr "Cynt"
-#: ../../network/shorewall.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Wedi canfod ffurfweddiad mur gwarchod!"
+msgid "Other OS (MacOS...)"
+msgstr "Systemau Gweithredu Eraill (MacOS...)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Account Password"
-msgstr "Cyfrinair y Cyfrif"
+msgid "To activate the mouse,"
+msgstr "I ysgogi'r llygoden,"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Account Login (user name)"
-msgstr "Mewngofnod Cyfrif (enw defnyddiwr)"
+msgid "Bringing up the network"
+msgstr "Cychwyn y rhwydwaith"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../common.pm:1
#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Oediad yn y cysylltiad (mewn eiliadau)"
+msgid "Screenshots will be available after install in %s"
+msgstr "Bydd lluniau o'r sgrĂźn ar gael ar ĂŽl gosod yn %s"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Connection speed"
-msgstr "Cyflymder y cysylltiad"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
+msgstr ""
+"Mae mwy nag un rhaniad Microsoft wedi ei ganfod ar eich disg caled.\n"
+"Dewiswch ba un rydych am newid ei faint er mwyn gosod eich\n"
+"system weithredu Mandrake Linux newydd\n"
+"\n"
+"Mae pob rhaniad wedi ei restri fel hyn: \"Enw Linux\", \"Enw Microsoft\",\n"
+"\"Maint\".\n"
+"\n"
+"Mae \"Enw Linux\" wedi ei strwythuro fel hyn: \"math o ddisg caled\", \n"
+"\"rhif y disg caled\", \"rhif y rhaniad\" (e.e., \"hda1\").\n"
+"\n"
+"\"hd\" yw'r \"Math o ddisg caled\" os mai disg caled IDE sydd gennych\n"
+"a \"sd\" yw disg caled SCSI.\n"
+"\n"
+"Llythyren wedi'r \"hd\" neu \"sd\" yw'r \"Rhif disg caled\" bob tro.\n"
+"Gyda disgiau caled IDE:\n"
+"\n"
+" * mae \"a\" yn golygu \"prif ddisg caled ar y rheolydd IDE cyntaf\",\n"
+"\n"
+" * mae \"b\" yn golygu \"ddisg caled gwas ar y rheolydd IDE cyntaf\",\n"
+"\n"
+" * mae \"c\" yn golygu \"prif ddisg caled ar yr ail reolydd IDE\",\n"
+"\n"
+" * mae \"d\" yn golygu \"ddisg caled gwas ar yr ail reolydd IDE\",\n"
+"\n"
+"Gyda disgiau caled SCSI mae \"a\" yn golygu'r \"enw SCSI isaf\", ac mae\n"
+" \"b\" yn golygu'r \"ail enw SCSI isaf\", ag ati.\n"
+"\n"
+"Mae \"Enw Windows\" yn cyfeirio at y llythyren y disg caled o dan\n"
+" Windows (\"C:\" yw'r ddisg neu raniad cyntaf)."
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Dialing mode"
-msgstr "Modd deialu"
+msgid "Tanzania"
+msgstr "Tanzania"
-#: ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Choose your country"
-msgstr "Dewiswch eich gwlad"
+msgid "Computing FAT filesystem bounds"
+msgstr "Cyfrifo ffiniau system ffeiliau FAT"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "Dns 2 y darparwr (dewisol)"
+msgid ""
+"\n"
+"Backup Sources: \n"
+msgstr ""
+"\n"
+"Ffynhonell Cadw wrth Gefn:\n"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "Dns 1 y darparwr (dewisol)"
+msgid "Content of the file"
+msgstr "Cynnwys y ffeil"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Provider phone number"
-msgstr "Rhif ffĂŽn y darparwr"
+msgid "Authentication LDAP"
+msgstr "Dilysu LDAP"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Enw darparwr (eng. darparwr.net)"
+msgid "Let me pick any driver"
+msgstr "Dewis gyrrwr fy hun"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Your personal phone number"
-msgstr "Eich rhif ffĂŽn personol"
+msgid "Profile "
+msgstr "Proffil"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Card IO_1"
-msgstr "IO_1 y cerdyn"
+msgid "transmitted"
+msgstr "darlledwyd"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Card IO_0"
-msgstr "IO_O y cerdyn"
+msgid "Palestine"
+msgstr "Palestinia"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Card IO"
-msgstr "IO'r Cerdyn"
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Card mem (DMA)"
-msgstr "Cof Cerdyn (DMA)"
+msgid "%d comma separated strings"
+msgstr "%d llinellau gwahanwyd gan gollnod"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Card IRQ"
-msgstr "IRQ y cerdyn"
+msgid "Here is the full list of keyboards available"
+msgstr "Dyma restr lawn o'r bysellfyrddau ar gael"
-#: ../../network/tools.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Please fill or check the field below"
-msgstr "Llanwch neu diciwch y maes islaw"
+msgid "Theme name"
+msgstr "Enw Thema"
-#: ../../network/tools.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Connection Configuration"
-msgstr "Ffurfweddiad y Cysylltiad"
+msgid "/_Help"
+msgstr "/_Cymorth"
-#: ../../network/tools.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
msgstr ""
-"Nid yw'n ymddangos i'ch system gysylltu Ăą'r Rhyngrwyd.\n"
-"Ailffurfweddwch eich cysylltiad."
-
-#: ../../network/tools.pm:1
-#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Am resymau diogelwch, bydd yn cael ei ddatgysylltu."
+"Yma medrwch benderfynu a ddylai'r sganwyr sy'n gysylltiedig Ăą'r cyfrifiadur "
+"hwn fod ar gael i gyfrifiaduron pell a pha rai."
-#: ../../network/tools.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Mae'r system wedi cysylltu Ăą'r Rhyngrwyd."
+msgid "the width of the progress bar"
+msgstr "lled y bar cynnydd"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Testing your connection..."
-msgstr "Profi eich cysylltiad..."
+msgid "Cook Islands"
+msgstr "Cook Islands"
-#: ../../network/tools.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Hoffech chi gysylltu Ăą'r Rhyngrwyd nawr?"
+msgid "Formatting partition %s"
+msgstr "Yn fformatio rhaniad %s"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Internet configuration"
-msgstr "Ffurfweddiad rhyngrwyd"
+msgid "Hostname required"
+msgstr "Mae angen enw gwesteiwr"
-#: ../../partition_table/raw.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
-msgstr ""
-"Mae rhywbeth gwael yn digwydd ar eich disg.\n"
-"Mae prawf i fesur ei gyfanrwydd wedi methu. \n"
-"Nid oes gwerth ysgrifennu i'r ddisg"
+msgid "Unselect fonts installed"
+msgstr "Tynnu ffontiau wedi eu gosod"
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid " (Default)"
-msgstr "(Rhagosodedig)"
+msgid "Cancel"
+msgstr "Diddymu"
-#: ../../printer/cups.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Ar wasanaethwr CUPS \"%s\""
+msgid "Searching for configured scanners ..."
+msgstr "Chwilio am sganiwr wedi ei ffurfweddu..."
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Remote Printers"
-msgstr "Argraffyddion Pell"
+msgid "Wheel"
+msgstr "Olwyn"
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "CUPS"
-msgstr "CUPS"
+msgid "Videocard"
+msgstr "Cerdyn fideo"
-#: ../../printer/cups.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "(on this machine)"
-msgstr "(ar y peiriant hwn)"
+msgid "\tBackups use tar and bzip2\n"
+msgstr "\t Bydd Cadw wrth gefn yn defnyddio tar a bzip2\n"
-#: ../../printer/cups.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "(on %s)"
-msgstr "(ar %s)"
+msgid "Remove Selected"
+msgstr "Tynnu'r Dewis"
-#: ../../printer/data.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
+msgid "/Autodetect _modems"
+msgstr "/Awtoganfod_modem"
-#: ../../printer/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "LPRng"
-msgstr "LPRng"
+msgid "Remove printer"
+msgstr "Tynnu argraffydd"
-#: ../../printer/data.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
+msgstr ""
+"RHYBUDD!\n"
+"\n"
+"Bydd DrakX yn newid maint eich rhaniad Windows. Byddwch\n"
+"ofalus: mae gwneud hyn yn beryglus. Os nad ydych wedi\n"
+"gwneud yn barod, dylech fynd allan o'r gosod, rhedeg\n"
+"scandisk yn Windows (ac os oes modd defrag), yna ail\n"
+"gychwyn y gosodiad. Dylech hefyd wneud copi wrth gefn\n"
+"o'ch data.Pan rydych yn siwr, cliciwch Iawn."
-#: ../../printer/data.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "LPD"
-msgstr "LPD"
+msgid "Which services would you like to allow the Internet to connect to?"
+msgstr "Pa wasanaethau'r hoffech i'r Rhyngrwyd gysylltu Ăą hwy?"
-#: ../../printer/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
+msgid ""
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
+msgstr ""
+"Croeso i'r gwasanaeth ffurfweddu e-bost\n"
+"\n"
+"Yma bydd modd i chi osod y system rhybuddio.\n"
-#: ../../printer/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "PDQ"
-msgstr "PDQ"
+msgid "Other"
+msgstr "Arall"
-#: ../../printer/data.pm:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
+msgid "Default"
+msgstr "Rhagosodedig"
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Unknown Model"
-msgstr "Model anhysbys"
+msgid "Button 2 Emulation"
+msgstr "Efelychiad Botwm 2"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Unknown model"
-msgstr "Model anhysbys"
+msgid "type1inst building"
+msgstr "adeiladu math 1inst"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "%s (Port %s)"
-msgstr "%s(Porth %s)"
+msgid "Abiword"
+msgstr "Abiword"
-#: ../../printer/main.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Host %s"
-msgstr "Gwesteiwr %s"
+msgid "choose image file"
+msgstr "dewis ffeil delwedd"
-#: ../../printer/main.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Network %s"
-msgstr "Rhwydwaith %s"
+msgid "X server"
+msgstr "Gwasanaethwr X"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Interface \"%s\""
-msgstr "Rhyngwyneb \"%s\""
+msgid "Domain Admin User Name"
+msgstr "Enw Defnyddiwr Gweinyddiaeth Parth"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Local network(s)"
-msgstr "Rhwydwaith(iau) lleol "
+msgid "There was an error while scanning for TV channels"
+msgstr "Digwyddodd gwall wrth sganio am sianelu teledu"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Raw printer (No driver)"
-msgstr "Argraffydd crai (dim gyrrwr)"
+msgid "US keyboard (international)"
+msgstr "Bysellfwrdd UDA (rhyngwladol)"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ", using command %s"
-msgstr ", defnyddio gorchymyn %s"
+msgid "Not installed"
+msgstr "Heb ei osod"
-#: ../../printer/main.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr "ar wasanaethwr Novell \"%s\", argraffydd \"%s\""
+msgid "LAN connection"
+msgstr "cysylltiad LAN"
-#: ../../printer/main.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr "ar wasanaethwr SMB/Windows \"%s\", rhannu \"%s\""
+msgid "/File/-"
+msgstr "/Ffeil/-"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", gwesteiwr TCP/IP \"%s\", porth %s"
+msgid "Italian"
+msgstr "Eidalaidd"
-#: ../../printer/main.pm:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr "ar wasanaethwr LPD \"%s\", argraffydd \"%s\""
+msgid "Basic"
+msgstr "Elfennol"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ", printing to %s"
-msgstr ", argraffu i %s"
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
+msgstr ""
+"\n"
+" Hawlfraint (C) 2002 MandrakeSoft\n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ", multi-function device"
-msgstr ",dyfais amlbwrpas"
+msgid "Honduras"
+msgstr "Honduras"
-#: ../../printer/main.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", dyfais amlbwrpas ar HP JetDirect"
+msgid "pdq"
+msgstr ""
-#: ../../printer/main.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ", multi-function device on USB"
-msgstr ", dyfais amlbwrpas ar USB"
+msgid "Card IO"
+msgstr "IO'r Cerdyn"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ", multi-function device on parallel port \\#%s"
-msgstr ", dyfais amlbwrpas ar borth paralel \\#\"%s"
+msgid "when checked, owner and group won't be changed"
+msgstr "wedi ei dicio, nid fydd y perchennog a'r grwp yn cael ei newid"
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", USB printer"
-msgstr "argraffydd USB"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
+msgstr ""
+"\n"
+"Mae'r rhaniad Bootstrap\n"
+"hwn ar gyfer cychwyniad\n"
+"dwbl eich system\n"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ", USB printer \\#%s"
-msgstr ", argraffydd USB \\#\"%s"
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
+msgstr ""
+"Dewiswch ar gyfer pob cam a fydd yn ail chwarae fel eich gosodiad, neu a "
+"fydd gyda llaw"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid " on parallel port \\#%s"
-msgstr " ar borth paralel \\#\"%s"
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
+msgstr ""
+"Medrwch benderfynu a ddylai sganwyr ar gyfrifiadur pell fod ar gael ar gyfer "
+"y cyfrifiadur hwn."
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Local Printers"
-msgstr "Argraffyddion Lleol"
+msgid "\t-Network by FTP.\n"
+msgstr "\t-Rhwydwaith drwy FTP.\n"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Pipe job into a command"
-msgstr "Peipio'r gwaith i orchymyn"
+msgid "Russian (Yawerty)"
+msgstr "Rwsiaidd (Yawerty)"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Enter a printer device URI"
-msgstr "Rhowch URI dyfais argraffydd"
+msgid "You must enter a device or file name!"
+msgstr "Rhaid cynnig enw dyfais neu ffeil!"
-#: ../../printer/main.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Printer on NetWare server"
-msgstr "Argraffydd ar wasanaethwr NetWare"
+msgid "/_Quit"
+msgstr "/_Gadael"
-#: ../../printer/main.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Argraffydd ar wasanaethwr SMB/Windows 95/98/NT"
+msgid ""
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
+msgstr ""
+"Rahaid cael minicode Alcatel.\n"
+"Llwytho i lawr o\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"achopio'r mgmt.o i /usr/share/speedtouch"
-#: ../../printer/main.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Argraffydd rhwydwaith (TCP/Soced)"
+msgid "Graphics memory: %s kB\n"
+msgstr "Cof graffeg: %s kB\n"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Printer on remote lpd server"
-msgstr "Argraffydd ar wasanaethwr lpd pell"
+msgid ""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+msgstr ""
+"Mae'r rhaglen hon yn feddalwedd rhydd; medrwch ei ailddosbarthu\n"
+"a/neu ei newid o dan amodau Trwydded Gyhoeddus Gyffredinol GNU\n"
+"fel sydd wedi ei gyhoeddi gan y Free Software Foundation; un ai fersiwn\n"
+"2 neu (yn ĂŽl eich dewis) unrhyw fersiwn diweddarach.\n"
+"\n"
+" Mae'r rhaglen yn cael ei ddosbarthu yn y gobaith y bydd yn ddefnyddiol,\n"
+" ond HEB UNRHYW WARANT; heb hyd yn oed awgrym o warant o\n"
+" FASNACHEIDDRWYDD nag ADDASRWYDD AR GYFER PWRPAS\n"
+" PENODOL. Gweler Trwydded Gyhoeddus Gyffredinol GNU am fwy o\n"
+" wybodaeth.\n"
+"\n"
+" Dylech fod wedi derbyn copi o Drwydded Gyhoeddus Gyffredinol GNU\n"
+" gyda'r rhaglen; os nad, ysgrifennwch at:\n"
+" Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,\n"
+"MA 02111-1307, USA\n"
-#: ../../printer/main.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Argraffydd ar wasanaethwr CUPS pell"
+msgid "access to compilation tools"
+msgstr "mynediad i offer crynhoad"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Remote printer"
-msgstr "Argraffydd pell"
+msgid "Please select data to restore..."
+msgstr "Dewiswch y data i'w adfer..."
-#: ../../printer/main.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Local printer"
-msgstr "Argraffydd lleol"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
+msgstr ""
+"Os ydych yn bwriadu defnyddio aboot, gofalwch adael lle gwag (2048 sector yn "
+"ddigon)\n"
+"ar ddechrau'r ddisg."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configuring applications..."
-msgstr "Ffurfweddi'u rhaglenni"
+msgid "Standard test page"
+msgstr "Tudalen prawf safonnol"
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
+msgid "Create"
+msgstr "Creu"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Tynnu argraffydd \"%s\"..."
+msgid "What"
+msgstr "Beth"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Ydych chi wir eisiau tynnu argraffydd \"%s\""
+msgid "There was an error ordering packages:"
+msgstr "Roedd gwall wrth drefnu pecynnau"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Remove printer"
-msgstr "Tynnu argraffydd"
+msgid "Bulgarian (BDS)"
+msgstr "Bwlgaraidd (BDS)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Learn how to use this printer"
-msgstr "Gwybod sut i ddefnyddio'r argraffydd"
+msgid "Disable Server"
+msgstr "Analluogi'r Gwasanaethwr"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Print test pages"
-msgstr "Argraffu tudalennau prawf"
+msgid "Filesystem encryption key"
+msgstr "Allwedd amgryptio system ffeil : "
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
-msgstr "Methwyd Ăą thynnu argraffydd \"%s\" o Star Office/OpenOffice.org/GIMP."
+msgid "Gujarati"
+msgstr "Gujarati"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
msgstr ""
-"Cafodd argraffydd \"%s\" ei dynnu'n llwyddiannus o Star Office/OpenOffice."
-"org."
+"Dewiswch y rhif cyntaf o'r amrediad 10 rydych am ei olygu,\n"
+"neu wasgwch Enter i barhau.\n"
+"Eich dewis?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Tynnu'r argraffydd o Star Office/OpenOffice.org/GIMP."
+msgid "Save theme"
+msgstr "cadw thema"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Tynnwch yr argraffydd hwn o Star Office/OpenOffice.org/GIMP"
+msgid "group"
+msgstr "grwp"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-"Wedi methu ag ychwanegu argraffydd \"%s\" i Star Office/OpenOffice.org/GIMP."
+msgid "Brazil"
+msgstr "Brazil"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-"Mae argraffydd \"%s\" wedi ei ychwanegu'n llwyddiannus i Star Office/"
-"OpenOffice.org/GIMP."
+msgid "Auto Install"
+msgstr "Awto Gosod"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Ychwanegu argraffydd i Star Office/OpenOffice.org/GIMP"
+msgid "Network Configuration Wizard"
+msgstr "Dewin Ffurfweddu'r Rhwydwaith"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Ychwanegwchyr argraffydd hwn i Star Office/OpenOffice.org/GIMP"
+msgid "Removable media automounting"
+msgstr "Cyfrwng symudadwy'n awto-osod"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Mae argraffydd \"%s\" wedi ei osod fel yr argraffydd rhagosodedig."
+msgid "Printing"
+msgstr "Argraffu"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Default printer"
-msgstr "Argraffydd rhagosodedig"
+msgid "Unkown driver"
+msgstr "Gyrrwr anhysbys"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Set this printer as the default"
-msgstr "Gosod yr argraffydd fel y rhagosodedig"
+msgid ""
+"There are no printers found which are directly connected to your machine"
+msgstr ""
+"Nid oes unrhyw argraffydd wedi ei ganfod wedi ei gysylltu'n uniongyrchol "
+"Ăą'ch cyfrifiadur"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printer options"
-msgstr "Dewisiadau argraffydd"
+msgid "Create a new partition"
+msgstr "Creu rhaniad newydd"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Printer manufacturer, model"
-msgstr "Gwneuthurwr yr argraffydd, model"
+msgid "Driver:"
+msgstr "Gyrrwr:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "Gwneuthurwr yr argraffydd, model, gyrrwr"
+msgid "unknown"
+msgstr "anhysbys"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Tynnu hen argraffydd \"%s\"..."
+msgid "Use fdisk"
+msgstr "Defnyddiwch fdisk"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Printer name, description, location"
-msgstr "Enw'r argraffydd, disgrifiad, lleoliad"
+msgid "MOVE YOUR WHEEL!"
+msgstr "SYMUDWCH YR OLWYN!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Printer connection type"
-msgstr "Math o gyswllt argraffydd"
+msgid "sent: "
+msgstr "anfonwyd: "
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Raw printer"
-msgstr "Argraffydd bras"
+msgid "Automatic IP"
+msgstr "IP awtomatig"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Do it!"
-msgstr "Gwna!!"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+" Note that two different options are available after clicking the button:\n"
+"\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
+msgstr ""
+"Dyna ni. Mae'r gosodiad wedi ei gwblhau ac mae eich system GNU/Linux\n"
+"yn barod i'w ddefnyddio. Cliciwch \"Nesaf ->\" i ailgychwyn y cyfrifiadur.\n"
+"Mae modd i chi gychwyn GNU/Linux neu Windows, prun bynnag sydd\n"
+"orau gennych (os oes gennych y ddwy system ar eich peiriant), gynted\n"
+"ag y bydd eich peiriant yn ail gychwyn. \n"
+"\n"
+"Mae'r botwm \"Uwch\" yn dangos dau fotwm arall:\n"
+"\n"
+" *\" creu disg meddal awto-gosod\": i greu disg meddal gosod fydd yn creu\n"
+"gosodiad cyflawn heb gymorth gweithredwr, yn debyg i'r gosodiad sydd\n"
+"newydd ei ffurfweddu.\n"
+"\n"
+"Sylwer bod dau ddewis gwahanol i'w gael wedi clicio'r botwm:\n"
+"\n"
+" *\"Ail chwarae\". Gosodiad rhannol awtomatig gan bod y cam o greu\n"
+"rhaniad yn cael ei hepgor.\n"
+"\n"
+" *Awtomeiddio\".Gosodiad cwbl awtomatig: mae'r disg caled wedi ei\n"
+"ailysgrifennu'n llwyr, a'r holl ddata wedi ei golli.\n"
+"\n"
+"Mae hwn yn nodwedd ddefnyddiol iawn pan yn gosod ar nifer fawr o\n"
+"beiriannau tebyg. Gw. yr adran Auto install ar ein safle gwe.\n"
+"\n"
+" *\"Cadw'r dewis o becynnau\":(*): mae hyn yn cadw'r dewis o becynnau\n"
+"wnaed cynt. Yna wrth wneud gosodiad arall, rhowch ddisg meddal yn y\n"
+"gyrrwr a rhedeg y gosodiad gan fynd i'r sgrĂźn cymorth drwy wasgu'r fysell\n"
+"[F1], a chyflwyno >>linux defcfg=\"disg meddal\"<<.\n"
+"\n"
+"(*) Bydd angen disg meddal wedi ei fformatio fel FAT (i greu un yn\n"
+"GNU/Linux, teipiwch \"mformat a:\")"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Close"
-msgstr "Cau"
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Argraffydd %s\n"
-"Beth ydych am ei newid ar yr argraffydd hwn?"
+msgid "Configuration of a remote printer"
+msgstr "Ffurfweddiad argraffydd pell"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Modify printer configuration"
-msgstr "Newid ffurfweddiad yr argraffydd"
+msgid "Moldova"
+msgstr "Moldova"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add a new printer"
-msgstr "Ychwanegu argraffydd newydd"
+msgid "Please check if you want to erase your tape before the backup."
+msgstr "Gwiriwch os ydych am ddileu eich tĂąp cyn y cadw wrth gefn."
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Normal Mode"
-msgstr "Modd Arferol"
+msgid "An online platform to respond to enterprise support needs."
+msgstr "Platfform arlein i ymateb i anghenion cefnogaeth penodol cwmni"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Change the printing system"
-msgstr "Newidiwch y system argraffu"
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "Dylai'r URL ddechrau gyda 'ftp' neu 'http:'"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "CUPS configuration"
-msgstr "Furfweddiad CUPS"
+msgid "Add a new rule at the end"
+msgstr "Ychwanegu rheol newydd ar y diwedd"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
msgstr ""
-"Adnewyddu rhestr argraffyddion (dangos pob argraffydd CUPS pell sydd ar gael)"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr "Arddangos pob argraffydd CUPS pell sydd ar gael"
+"Medrwch benderfynu a ddylai argraffydd ar gyfrifiadur pell fod ar gael ar "
+"gyfer y cyfrifiadur hwn."
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
msgstr ""
-"Mae'r argraffyddion canlynol wedi eu ffurfweddi. Cliciwch ar un i newid ei "
-"osodiadau; ei wneud yn argraffydd rhagosodedig; i edrych am wybodaeth amdano."
+"Medrwch nawr ei ddewis i fodiwl. %s.\n"
+"Mae'r dewisiadau yn fformat ``name=value name2=value2 ...''.\n"
+"e.e, ``io=0x300 irq=7''"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printing system: "
-msgstr "System argraffu."
+msgid "Quit without writing the partition table?"
+msgstr "Gorffen heb ysgrifennu'r tabl rhaniadau?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Checking installed software..."
-msgstr "Gwirio'r meddalwedd sydd wedi ei osod..."
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Installing Foomatic..."
-msgstr "Gosod Foomatic..."
+msgid "Installing packages..."
+msgstr "Gosod pecynnau..."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "Methu ffurfweddu argraffydd \"%s\"!"
+msgid "Dutch"
+msgstr "Isalmaenaidd"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Ffurfweddu argraffydd \"%s\" ..."
+msgid "The following packages need to be installed:\n"
+msgstr "Mae'r pecynnau canlynol angen eu gosod:\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Reading printer data..."
-msgstr "Darllen data argraffydd..."
+msgid "Angola"
+msgstr "Angola"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Pa system argraffu(sbwlydd) ydych chi am ei ddefnyddio?"
+msgid "service setting"
+msgstr "gosodiad gwasanaeth"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Select Printer Spooler"
-msgstr "Dewiswch Sbwlydd Argraffydd"
+msgid "Custom"
+msgstr "Arddull"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Setting Default Printer..."
-msgstr "Gosod yr Argraffydd Rhagosodedig"
+msgid "File is already used by another loopback, choose another one"
+msgstr ""
+"Mae'r ffeil yn cael ei ddefnyddio eisoes gam gylch-ĂŽl arall, dewiswch un "
+"arall"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Installing %s ..."
-msgstr "Gosod %s..."
+msgid "Read-only"
+msgstr "Darllen yn unig"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Removing %s ..."
-msgstr "Tynnu %s..."
+msgid "Latvia"
+msgstr "Latfia"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Ni fydd system argraffu (%s) yn cychwyn yn awtomatig pan fydd y peiriant yn "
-"cael ei gychwyn.\n"
-"\n"
-"Mae'n bosibl fod y cychwyn awtomatig wedi ei ddiffodd wrth newid i lefel "
-"diogelwch uwch, am fod a system argraffu'n bwynt tebygol ar gyfer "
-"ymosodiadau.\n"
-"\n"
-"Ydych chi am i'r cychwyn awtomatig gael ei droi ymlaen eto?"
+msgid "No known driver"
+msgstr "Dim gyrrwr hysbys"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Cychwyn y system argraffu wrth gychwyn y cyfrifiadur"
+msgid "1 MB"
+msgstr "1 MB"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
+msgstr ""
+"Os nad hwn yw'r un rydych am ei ffurfweddu, rhowch enw dyfais/enw ffeil ar y "
+"llinell mewnbwn."
+
+#: ../../standalone/draksound:1
+#, c-format
+msgid ""
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
"\n"
-"Do you really want to configure printing on this machine?"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-"Rydych ar fin gosod system argraffu %s ar system sy'n rhedeg lefel diogelwch "
-"%s. \n"
+"Nid oes Cerdyn Sain wedi ei ganfod ar eich peiriant. Gwriwch fod Cerdyn Sain "
+"sy'n cael ei gynnal gan Linux wedi ei osod yn gywir.\n"
"\n"
-"Mae'r system yn rhedeg daemon (proses gefndirol) sy'n aros am waith argraffu "
-"ac yna yn eu trin. Mae'r daemon hefyd yn gyraeddadwy gan beiriannau pell "
-"drwy'r rhwydwaith ac felly'n bwynt ymosod. Felly, dim ond ychydig o "
-"ddaemonau sy'n cael eu cychwyn yn rhagosodedig, ar y lefel diogelwch hwn.\n"
"\n"
-"Ydych chi wir eisiau ffurfweddu argraffu ar y peiriant hwn?"
+"Cewch ymweld Ăą'n cronfa ddata caledwedd yn:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Gosod system argraffu yn lefel diogelwch %s"
+msgid "Configure Local Area Network..."
+msgstr "Ffurfweddu'r Rhwydwaith Lleol..."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "paranoid"
-msgstr "Paranoia"
+msgid "Launch the sound system on your machine"
+msgstr "Cychwyn y system sain ar eich peiriant"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "high"
-msgstr "uchel"
+msgid "Preparing printer database..."
+msgstr "Paratoi cronfa ddata argraffydd..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Restarting printing system..."
-msgstr "Ailgychwyn system argraffu..."
+msgid "Information"
+msgstr "Gwybodaeth"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Configuration of a remote printer"
-msgstr "Ffurfweddiad argraffydd pell"
+msgid "No network card"
+msgstr "Dim cerdyn rhwydwaith"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Nid oedd mynediad i'r rhwydwaith yn rhedeg ac nid oedd modd ei gychwyn. "
-"Gwiriwch eich ffurfweddiad a'ch caledwedd. Yna ceisiwch ail ffurfweddi eich "
-"argraffydd."
+msgid "Which filesystem do you want?"
+msgstr "Pa fath o system ffeil ydych chi eisiau?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"Nid oes modd cychwyn y ffurfweddiad rhwydwaith wnaed yn ystod y gosodiad. "
-"Gwiriwch p'un ai yw'r rhwydwaith yn darparu mynediad ar ĂŽl cychwyn eich "
-"system a chywiro'r ffurfweddiad gan ddefnyddio Canolfan Rheoli Mandrake, "
-"adran \"Rhwydwaith a'r Rhyngrwyd\"/\"Cysylltiad\", ac yna gosod yr "
-"argraffydd, eto gan ddefnyddio Canolfan Rheoli Mandrake, adran \"Caledwedd\"/"
-"\"Argraffydd\""
+msgid "3 buttons"
+msgstr "3 botwm"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configure the network now"
-msgstr "Ffurfweddwch y rhwydwaith"
+msgid "Detailed information"
+msgstr "Gwybodaeth fanwl"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Go on without configuring the network"
-msgstr "Mynd yn eich blaen heb ffurfweddu'r rhwydwaith"
+msgid "Malta"
+msgstr "Malta"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
+"Printer default settings\n"
+"\n"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
msgstr ""
-"Ydych chi am ffurfweddi argraffydd pell. Mae hyn angen mynediad ar "
-"rwydwaith, ond nid yw eich rhwydwaith wedi ei ffurfweddu eto. Os ydych am "
-"fynd ymlaen heb ffurfweddiad rhwydwaith, ni bydd modd i chi ddefnyddio'r "
-"argraffydd rydych yn ei ffurfweddu ar hyn o bryd. Beth ydych am ei wneud?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Network functionality not configured"
-msgstr "Nid yw swyddogaethau'r rhwydwaith wedi ei ffurfweddu"
+"Gosodiadau rhagosodedig yr argraffydd\n"
+"\n"
+"Dylech wneud yn siwr fod maint y dudalen a'r modd math inc/argraffu (os ar "
+"gael) a hefyd bod ffurfweddiad caledwedd argraffyddion laser (cof, uned "
+"ddeublyg, blychau papur ychwanego) wedi eu gosod yn gywir. Sylwer bod fod "
+"argraffiad ansawdd/cydraniad uchel iawn yn medru arafu'r argraffu'n "
+"sylweddol.."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Starting network..."
-msgstr "Cychwyn y rhwydwaith..."
+msgid "This floppy is not FAT formatted"
+msgstr "Nid yw 'r disg meddal hwn wedi ei fformatio i FAT"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Refreshing printer data..."
-msgstr "Adnewyddu data'r argraffydd..."
+msgid "Configuring network"
+msgstr "Ffurfweddu'r rhwydwaith"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Rydych wedi trosglwyddo eich argraffydd rhagosodedig blaenorol rhagosodedig "
-"(\"%s\"). A ddylai fod yn argraffydd rhagosodedig y system argraffu newydd %"
-"s ?"
+msgid "Graphic Card"
+msgstr "Cerdyn Graffeg"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Transfer printer configuration"
-msgstr "Trosglwyddo ffurfweddiad yr argraffydd"
+msgid "Resizing Windows partition"
+msgstr "Mesur ffiniau system ffeilio Windows"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Transferring %s..."
-msgstr "Trosglwyddo %s..."
+msgid "Provider dns 1 (optional)"
+msgstr "Dns 1 y darparwr (dewisol)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "New printer name"
-msgstr "Enw'r argraffydd newydd"
+msgid "Cameroon"
+msgstr "Cameroon"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Mae argraffydd \"%s\" yn bodoli eisoes,\n"
-"ydych chi wir eisiau ailysgrifennu ei ffurfweddiad?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
msgstr ""
-"Dylai enw'r argraffydd gynnwys llythrennau, rhifau a'r tanlinellu, yn unig"
+"Medrwch rannu %s\n"
+"Wedi gorffen, peidiwch anghofio cadw gyda 'w'"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Transfer"
-msgstr "Trosglwyddo"
+msgid "Close"
+msgstr "Cau"
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
msgstr ""
-"Mae argraffydd o'r enw \"%s\" yn bodoli eisoes yn %s.\n"
-"Cliciwch \"Trosglwyddo\" i ysgrifennu drosto.\n"
-"Mae modd i chi osod enw newydd arno neu ei hepgor."
+"\"Gwlad\":gwiriwch y dewis gwlad. Os nad ydych yn y wlad hon\n"
+"cliciwch y botwm \"Ffurfweddu\"a dewis un arall. Os nad yw eich\n"
+"gwlad ar y rhestr gyntaf, cliciwch \"Rhagor\" i wdrych ar y rhestr\n"
+"gyflawn."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Do not transfer printers"
-msgstr "Peidio trosglwyddo argraffydd"
+msgid "Calendar"
+msgstr "Calendr"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
+"Restore Selected\n"
+"Catalog Entry"
msgstr ""
-"\n"
-"Nodwch yr argraffydd rydych am ei drosglwddo a chliciwch\n"
-"\"Trosglwyddo\"."
+"Adfer Cofnod\n"
+"Catalog Ddewiswyd"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
msgstr ""
-"\n"
-"Hefyd nid oes modd trosglwyddo argraffyddion ffurfweddwyd gyda ffeiliau PPD "
-"ddarparwyd gan eu gwneuthurwyr na gyrrwyr CUPS brodorol."
+"I ddefnyddio argraffydd lpd pell, rhaid darparu enw gwesteiwr gwasanaethwr "
+"yr argraffydd ac enw'r argraffydd ar y gwasanaethwr hwnnw."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Yn ogystal, nid oes modd trosglwyddo rhesi grewyd gan y rhaglen hon na "
-"\"foomatic-configure\"."
+msgid "Iceland"
+msgstr "Ynys yr IĂą"
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "Nid yw LPD na LPRng yn cynnal argraffyddion IPP.\n"
+msgid "consolehelper missing"
+msgstr "consolehelper ar goll"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"Mae PDQ yn cynnal argraffyddion lleol, LDP pell, a Socket/TCP, yn unig.\n"
+msgid "stopped"
+msgstr "ataliwyd"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"Nid yw CUPS yn cefnogi argraffyddion ar wasanaethwyr Novell neu "
-"argraffyddion sy'n anfon data mewn gorchymyn ffurf -rhydd.\n"
+msgid "Whether the FPU has an irq vector"
+msgstr "P'un ai oes gan yr FPU fector irq"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Mae modd i chi gopĂŻo ffurfweddiad yr argraffydd fel wnaethoch o yspwlydd %s "
-"i %s eich yspwlydd cyfredol. Bydd yr holl ddata ffurfweddi (enw argraffydd, "
-"disgrifiad, lleoliad, math o gysylltiad a gosodiadau dewis rhagosodedig) yn "
-"cael eu trosi, ond ni fydd y gwaith argraffu'n cael eu trosi.\n"
-"Ni fydd yr holl waith argraffu'n cael eu trosi, am y rhesymau canlynol:\n"
+msgid "Ext2"
+msgstr "Ext2"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-"Mae eich argraffydd wedi ei ffurfweddu'n awtomatig i rhoi mynediad i chi i'r "
-"gyrrwr cerdyn llun o'c cyfrifiadur. Mae modd i chi gael mynediad at eich "
-"cardiau llun drwy'r rhaglen graffigol \"MtoolsFM\" (Dewislen: \"Rhaglenni\" -"
-"> \"Offer ffeil\" -> \"Rheolwr Ffeiliau MTools\") neu ar y llinell "
-"orchymyn: \"mtools\" (\"man mtools\" am ragor o wybodaeth) Bydd ys system o "
-"dan yrrwr \"p\", neu lythrennau canlynol pan fydd gennych fwy nag un "
-"argraffydd HP gyda gyrwyr cerdyn llun. Yn MToolsFM\" mae modd newid rhwng "
-"llythrennau gyrwyr drwy'r maes ar ben uchaf de'r rhestr."
+msgid "Expand Tree"
+msgstr "Estyn y goeden"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
+"The old \"%s\" driver is blacklisted.\n"
"\n"
-"Do not use \"scannerdrake\" for this device!"
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-"Mae eich dyfais aml bwrpas HP wedi cael ei ffurfweddu'n awtomatig i fedru "
-"sganio. Mae modd i chi sganio gyda \"scanimage\" (\"scanimage -d hp:%s\" i "
-"bennu pa un os oes gennych fwy nag un) o'r llinell orchymyn neu gyda rhag "
-"wynebau graffigol \"xscanimage\" neu \"xsane\". Os ydych yn defnyddio GIMP, "
-"medrwch sganio hefyd, drwy ddewis y man priodol yn y ddewislen \"Ffeil\"/"
-"\"Cipio\". Galwch hefyd \"man scanimage\" ar y linell orchymyn i dderbyn mwy "
-"o wybodaeth.\n"
+"Mae'r hen yrrwr \"%s\" wedi ei wahardd.\n"
"\n"
-"Peidiwch defnyddio \"scannerdrake\" ar gyfer y ddyfais hon."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printing test page(s)..."
-msgstr "Argraffu tudalen(nau) prawf..."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Print option list"
-msgstr "Rhestr ddewis argraffu"
+"Mae'n effeithio'n andwyol ar y cnewyllyn\n"
+"\n"
+"Bydd y gyrrwr \"%s|\"'n cael ei ddefnyddio ar y cychwyn"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Argraffu ar argraffydd \"%s\""
+msgid "Expert Mode"
+msgstr "Modd Uwch"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Argraffu/Mynediad Cardiau Llun ar \"%s\""
+msgid "Printer options"
+msgstr "Dewisiadau argraffydd"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Argraffu/Sganio ar \"%s\""
+msgid "Local Network adress"
+msgstr "Cyfeiriad y Rhwydwaith Lleol "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Argraffu/Sganio/Cardiau Llun ar \"%s\""
+msgid "Backup your System files. (/etc directory)"
+msgstr "Cadw wrth gefn ffeiliau System. ( cyfeiriadur /etc )"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
+"\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
"\n"
+"Do you want to install the updates ?"
msgstr ""
-"I wybod am y dewisiadau sydd ar gael ar gyfer yr argraffydd, darllenwch un "
-"ai'r rhestr isod neu cliciwch ar y botwm \"Rhestr dewis argraffu\".%s%s%s\n"
+"Mae'n bosibl i chi llwytho i lawr y pecynnau diweddaraf sydd wedi eu\n"
+"ryddhau ers i'r dosbarthiad fod ar gael.Efallai bod bod gwallau amaterion "
+"diogelwch wedi eu cywiro\n"
"\n"
+"I lwytho'r pecynnau i lawr, bydd angen cyswllt gweithredol\n"
+"Ăą'r Rhyngrwyd.\n"
+"\n"
+"Ydych chi am osod y diweddariadau?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Samba Server"
+msgstr "Gwasanaethwr Samba"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg, alert=1)\n"
"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
+"Enable/Disable IP spoofing protection."
msgstr ""
+"Ymresymiadau: (arg, alert=1)\n"
"\n"
-"Mae'r gorchmynion \"%s\" a \"%s\" hefyd yn caniatĂĄu newid y gosodiadau dewis "
-"ar gyfer tasg argraffu penodol. Ychwanegwch y gosodiadau angenrheidiol i'r "
-"llinell gorchymyn, e.e \"%s <file>\".\n"
+"Galluogi/Analluogi Amddiffyn spwffio IP"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Mae modd hefyd i ddefnyddio rhag wyneb graffigol \"xpdq\" i osod dewisiadau "
-"a thrin gwaith argraffu.\n"
-"\n"
-"Os ydych yn defnyddio KDE fel amgylchedd pen bwrdd mae gennych \"botwm "
-"argyfwng\", eicon ar y bwrdd gwaith, wedi ei labelu \"Atal yr Argraffydd!\", "
-"fydd yn stopio 'r holl waith argraffu'n syth pan fyddwch yn ei glicio. Mae "
-"hyn yn ddefnyddiol pan fydd y papur wedi mynd yn sownd, ag ati.\n"
+msgid "Australian Optus cable TV"
+msgstr "Teledu Cebl Opus Awstralia"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
msgstr ""
-"Mae modd defnyddio'r gorchymyn hwn ym maes \"Gorchymyn argraffu\" deialog "
-"nifer o raglenni. Ond peidiwch Ăą rhoi'r enw ffeil yma oherwydd bod y ffeil "
-"i'w argraffu wedi ei ddarparu gan y rhaglen.\n"
+" <Tab>/<Alt-Tab> rhwng elfennau | <Space> yn dewis | <F12> y sgrĂźnnesaf "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"I argraffu ffeil o'r llinell orchymyn (ffenestr terfynnell) defnyddiwch y "
-"gorchymyn \"%s <file>\" or \"%s <file>\".\n"
+msgid "Subnet:"
+msgstr "Isnet:"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"I edrych ar y rhestr o'r dewisiadau sydd ar gael ar gyfer yr argraffydd "
-"cyfredol cliciwch ar fotwm \"Rhestr dewisiadau argraffu\"."
+msgid "Zimbabwe"
+msgstr "Zimbabwe"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Mae'r gorchymyn \"%s\" hefyd yn caniatau i newid y gosodiadau dewis ar gyfer "
-"tasg argraffu penodol. Ychwanegwch y gosodiadau angenrheidiol i'r llinell "
-"gorchymyn, e.e \"%s <file>\". "
+msgid "Please enter the host name or IP."
+msgstr "Rhowch enw'r gwesteiwr neu'r IP"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"I argraffu ffeil o'r llinell orchymyn (ffenestr terfynnell) defnyddiwch "
-"orchymyn \"%s <file>\".\n"
+msgid "When"
+msgstr "Pryd"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Second DNS Server (optional)"
+msgstr "Ail Wasanaethwr DNS (dewisol)"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Finland"
+msgstr "Y Ffindir"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Here is a list of the available printing options for the current printer:\n"
+"Arguments: (arg)\n"
"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
msgstr ""
-"Dyma restr o'r dewisiadau argraffu sydd ar gael ar gyfer yr argraffydd "
-"presennol:\n"
+"Ymresymiadau: (arg)\n"
"\n"
+"CaniatĂĄu i bob gwasanaeth sy'n cael ei reoli gan tcp_wrappers os yw \\fIarg"
+"\\fP = ALL. Dim ond rhai lleol\n"
+"os\\fIarg\\fP = LOCAL a dim os \\fIarg\\fP = NONE. I gnaiatĂĄu'r "
+"gwasanaethausydd angen defnyddiwch /etc/hosts.allow\n"
+"(gw. hosts.allow(5))."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Mae modd defnyddio'r gorchmynion hyn ym maes \"Gorchmynion Argraffu\" y "
-"deialogau argraffu mewn nifer o raglenni, ond yma nid ydynt yn darparu'r "
-"enw ffeil am fod y ffeil i'r argraffydd yn cael ei ddarparu gan y rhaglen.\n"
+msgid "Color depth: %s\n"
+msgstr "Dyfnder lliw: %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"I argraffu ffeil o'r linell orchymyn (ffenestr derfynnell) mae modd "
-"defnyddio un ai'r gorchymyn \"%s <file>\" neu offeryn argraffu graffigol: "
-"\"xpp <file>\" neu \"kprinter <file>\". Mae'r offeryn graffigol yn caniatĂĄu "
-"chi ddefnyddio'r argraffydd ac i newid gosodiadau dewis yn hawdd.\n"
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "Does dim mod dad-ddewis y pecyn hwn. Rhaid ei ddiweddaru"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Did it work properly?"
-msgstr "A weithiodd hwnnw'n iawn?"
+msgid "Loading from floppy"
+msgstr "Llwytho o ddisg meddal"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
-"Mae tudalen(nau) prawf wedi eu hanfon at yr argraffydd.\n"
-"Gall gymryd amser cyn i'r argraffydd gychwyn.\n"
+"Mae Drakperm yn cael ei ddefnyddio i weld ffeiliau i'w defnyddio i drwsio "
+"caniatad, perchnogion, a grwpiau drwy msec.\n"
+"Mae modd i chi olygu eich rheolau eich hunfydd yn ysgrifennu droe y rheolau "
+"rhagosodedig."
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Mae tudalennau prawf wedi eu hanfon i'r argraffydd.\n"
-"Gall gymryd amser cyn i'r argraffydd gychwyn.\n"
-"Statws argraffu:\n"
-"%s\n"
-"\n"
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do not print any test page"
-msgstr "Peidiwch argraffu tudalennau prawf"
+msgid "Slovenia"
+msgstr "Slovenia"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Photo test page"
-msgstr "Tudalen prawf llun"
+msgid ""
+"Enter a user\n"
+"%s"
+msgstr ""
+"Rhowch enw defnyddiwr\n"
+"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Alternative test page (A4)"
-msgstr "Prawf tudalen arall (A4)"
+msgid ""
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
+msgstr ""
+"- dyfeisiau PCI ac USB : dyma restr gwerthwyr, dyfais, iswerthwyr ac "
+"isddyfais PCI/USB"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "Prawf tudalen arall (Llythyr)"
+msgid "ProgressBar color selection"
+msgstr "Dewis lliw ProgressBar"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Standard test page"
-msgstr "Tudalen prawf safonnol"
+msgid ""
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
+msgstr ""
+"Dyma'r cofnodion gwahanol ar eich dewislen cychwyn hyd yma.\n"
+"Mae modd i chi ychwanegu rhagor neu newid y rhai presennol."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Print"
-msgstr "Argraffu"
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "No test pages"
-msgstr "Dim tudalennau prawf"
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
msgstr ""
-"Dewiswch y tudalennau prawf rydych am eu hargraffu\n"
-"Sylwer: gall y dudalen brawf llun camera gymryd cryn dipyn o amser cyn cael "
-"ei argraffu ac ar argraffydd laser heb lawer o gof mae'n bosibl na ddaw o "
-"gwbl. Yn y rhan fwyaf o achosion, mae'r prawf tudalen safonol yn ddigonol."
+"Mae'n rhedeg gorchmynion wedi eu trefnu gan y gorchymyn at ar amser wedi \n"
+"ei bennu pan oedd at yn rhedeg, gan rhedeg gorchmynion swp pan fydd \n"
+"cyfartaledd y llwyth yn ddigon isel."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Test pages"
-msgstr "Tudalennau prawf"
+msgid "Radio support:"
+msgstr "Cynnal radio:"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Ydych chi am osod argraffydd (\"%s\")\n"
-"fel yr argraffydd rhagosodedig?"
+msgid "Installing SANE packages..."
+msgstr "Gosod pecynnau SANE..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Option %s out of range!"
-msgstr "Dewis %s allan o amrediad!"
+msgid "boot disk creation"
+msgstr "creu disg cychwyn"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Option %s must be a number!"
-msgstr "Rhaid i ddewis %s fod yn rhif!"
+msgid "LDAP"
+msgstr "LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Rhaid i ddewis %s fod yn gyfanrif"
+msgid "SILO"
+msgstr "SILO"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
#, c-format
-msgid "Printer default settings"
-msgstr "Gosod yr Argraffydd Rhagosodedig"
+msgid "Change type"
+msgstr "Newid y math"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "SILO Installation"
+msgstr "Gosodiad SILO"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use CD/DVDROM to backup"
+msgstr "Defnyddiwch yr CD/DVDROM i gadw wrth gefn"
+
+#: ../../install_messages.pm:1
#, c-format
msgid ""
-"Printer default settings\n"
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
-"Gosodiadau rhagosodedig yr argraffydd\n"
+"Llongyfarchiadau, mae'r gosodiad wedi ei gwblhau.\n"
+"Tynnwch y cyfrwng cychwyn a gwasgu Return i ail gychwyn.\n"
"\n"
-"Dylech wneud yn siwr fod maint y dudalen a'r modd math inc/argraffu (os ar "
-"gael) a hefyd bod ffurfweddiad caledwedd argraffyddion laser (cof, uned "
-"ddeublyg, blychau papur ychwanego) wedi eu gosod yn gywir. Sylwer bod fod "
-"argraffiad ansawdd/cydraniad uchel iawn yn medru arafu'r argraffu'n "
-"sylweddol.."
+"\n"
+"Am wybodaeth am gywiriadau sydd ar gael ar gyfer y rhyddhad hwn o Mandrake\n"
+"Linux, cysylltwch a'r atodiad, sydd i'w gael yn:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Mae gwybodaeth ar ffurfweddu eich system ar gael ym mhenawdau ĂŽl osod\n"
+"yr Official Mandrake Linux User's Guide."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr "Llwytho Cadarnewdd i Fyny ar gyfer HP LaserJet 1000"
+msgid "paranoid"
+msgstr "Paranoia"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Send mail report after each backup to:"
+msgstr "Anfonwch adroddiad e-bost wedi pob cadw wrth gefn i :"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+"This command you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications. But here do not supply the file name "
+"because the file to print is provided by the application.\n"
msgstr ""
-"I fedru argraffu gyda eich argraffydd inkjet Lexmark a'r ffurfweddiad hwn, "
-"bydd angen gyrwyr argraffydd inkjet sydd wedi eu darparu gan Lexmark (http://"
-"www.lexmark.com/). Ewch i'w safle yn yr UDA a chliciwch ar y botwm \"Drivers"
-"\". Yna dewiswch eich model ac yna \"Linux\" fel system weithredu. Mae'r "
-"gyrwyr yn dod fel pecynnau RPM neu sgriptiau cragen gyda gosodiad graffigol "
-"rhyngweithiol. Nid oes angen i chi wneud y ffurfweddiad drwy'r wyneb "
-"graffigol. Diddymwch yn syth wedi'r cytundeb trwyddedu. Yna argraffwch "
-"dudalennau'r alinio'r pen argraffu gyda \"lexmarkmaintain\" a newid "
-"gosodiadau aliniad y pen gyda'r rhaglen."
+"Mae modd defnyddio'r gorchymyn hwn ym maes \"Gorchymyn argraffu\" deialog "
+"nifer o raglenni. Ond peidiwch Ăą rhoi'r enw ffeil yma oherwydd bod y ffeil "
+"i'w argraffu wedi ei ddarparu gan y rhaglen.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Ffurfweddiad inkjet Lexmark"
+msgid "Resolution"
+msgstr "Cydraniad"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
msgstr ""
-"Mae'r gyrwyr argraffydd inkjet sydd wedi eu darparu gan Lexmark yn cynnal "
-"argraffyddion lleol, yn unig. Cysylltwch eich argraffydd i borth lleol neu "
-"ffurfweddwch ef i'r peiriant mae'n gysylltiedig ag ef."
+"I argraffu i argraffydd SMB, rhaid darparu enw gwesteiwr SMB (Sylwer! Mi all "
+"fod yn wahanol i'w enw gwesteiwr TCP/IP!) ac o bosibl cyfeiriad IP'r "
+"gwasanaethwr argraffu, yn ogystal Ăą'r enw rhannu ar gyfer yr argraffydd "
+"rydych am gael mynediad iddo ac unrhyw enw defnyddiwr, cyfrinair a "
+"gwybodaeth am grwp gwaith perthynol."
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse icmp echo."
msgstr ""
-"Rydych yn ffurfweddu winprinter laser OKI. Mae'r argraffydd hwn\n"
-"yn defnyddio protocol cyfathrebu arbennig. Dim ond trwy eu cysylltu Ăą'r "
-"porth paralel cyntaf mae modd cael yr argraffydd hwn i weithio. Pan fo eich "
-"argraffydd wedi ei gysylltu i borth arall neu i flwch gwasanaethwr argraffu, "
-"cysylltwch yr argraffydd i'r porth paralel cyntaf cyn argraffu tudalen "
-"brawf. Os na wnewch chi hynny, ni fydd yr argraffydd yn gweithio. Bydd eich "
-"gosodiad ynghylch ymath o gysylltiad yn cael ei anwybyddu gan y gyrrwr."
+"Ymredymiadau: (arg)\n"
+"\n"
+"GaniatĂĄu/Gwrthod atsain icmp."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "OKI winprinter configuration"
-msgstr "Ffurfweddiad OKI winprinter "
+msgid "reconfigure"
+msgstr "ailffurfweddu"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
-"Nid yw eich argraffydd wedi ei rhestri, dewiswch un cyfatebol (gw. llawlyfr "
-"eich argraffydd) neu un tebyg."
+"Mae modd i'ch cerdyn gael cefnogaeth cyflymu caledwedd 3D gyda XFree %s \n"
+"SYLWER CEFNOGAETH ARBROFOL YW HWN AC FE ALL RHEWI EICH CYFRIFIADUR."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
-"\n"
-"\n"
-"Gwiriwch os yw Printerdrake wedi awto ganfod eich argraffydd yn gywir. "
-"Chwiliwch am y model cywir pan fo'r cyrchwr yn sefyll ar y model anghywir "
-"neu ar \"Argraffydd bras\"."
+msgid "Xinetd Service"
+msgstr "Gwasanaeth Xinetd"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which printer model do you have?"
-msgstr "Pa fath o argraffydd sydd gennych?"
+msgid "access to network tools"
+msgstr "mynediad i offer rhwydwaith"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer model selection"
-msgstr "Dewis model yr argraffydd"
+msgid "Firmware-Upload for HP LaserJet 1000"
+msgstr "Llwytho Cadarnewdd i Fyny ar gyfer HP LaserJet 1000"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Reading printer database..."
-msgstr "Darllen cronfa ddata argraffydd..."
+msgid ""
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
+msgstr ""
+"Mae Mandrake Linux 9.1 yn caniatĂĄu i chi ddefnyddio'r feddalwedd ddiweddaraf "
+"i chwarae ffeiliau cerddoriaeth a sain, golygu a threfnu eich delweddau, "
+"lluniau a fideo."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select model manually"
-msgstr "Dewiswch y model gyda llaw"
+msgid "Here is a list of all auto-detected printers. "
+msgstr "Dyma restr o argraffyddion wedi eu awtoganfod."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The model is correct"
-msgstr "Mae'r model yn gywir"
+msgid ""
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
+msgstr ""
+"Gwall gosod aboot, \n"
+"ceisiwch orfodi gosodiad hyd yn oed os yw hynny'n dinistrio'r rhaniad cyntaf?"
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
+"Options Description:\n"
"\n"
-"For your printer Printerdrake has found:\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
-"%s"
msgstr ""
-"Mae Printerdrake wedi cymharu'r enw model yn sgil yr awto ganfod gyda'r "
-"modelau sy'n cael eu rhestri yn ei gronfa ddata i gael y cydweddiad gorau. "
-"Gall y dewis fod yn anghywir, yn arbennig os nad yw eich argraffydd yn cael "
-"ei enwi yn y gronfa ddata. Felly, edrychwch i weld Ăą yw'r dewis yn gywir a "
-"chliciwch \"Model cywir\" os yw ac os nad yw, cliciwch \" Dewiswch y model "
-"gyda llaw\" fel bo modd i chi ddewis eich argraffydd gyda llaw ar y sgrĂźn "
-"nesaf.\n"
+"disgrifiad o'r dewisiadau:\n"
"\n"
-"Ar gyfer eich argraffydd mae Printerdrake wedi canfod\n"
+"Yma mae Drakbackup yn caniatĂĄu i chi newid:\n"
"\n"
-"%s"
+" - Y modd cywasgu:\n"
+" \n"
+" Os wnewch chi glicio cywasgiad bzip2, byddwch yn \n"
+" cywasgu eich data'n well na gzip (tua 2-10%%).\n"
+" Nid yw'r dewis wedi ei nodi drwy ragosodiad gan fod\n"
+" angen mwy o amser ar y modd cywasgu hwn (tua 1000%% yn fwy).\n"
+"\n"
+"- Y modd diweddaru:\n"
+"\n"
+" Bydd y dewis hwn yn diweddaru eich caw wrth gefn, ond\n"
+" nid yw'r dewis hwn wir yn ddefnyddiol gan fo angen dadgywasgu\n"
+" eich cadw wrth gefn cyn bo modd i chi ei ddiweddaru.\n"
+" \n"
+"- Y modd .backupignore\n"
+" Fel gyda cvs, bydd Drakbackup yn anwybyddu pob cyfeiriad\n"
+" yn ffeiliau .backupignore ym mhob cyfeiriadur.\n"
+" ar wahĂąn i: \n"
+" /*> cat .backupignore*/\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Your printer model"
-msgstr "Model eich argraffydd"
+msgid ""
+"Restore Selected\n"
+"Files"
+msgstr ""
+"Adfer y Dewis\n"
+"Ffeiliau"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Preparing printer database..."
-msgstr "Paratoi cronfa ddata argraffydd..."
+msgid ""
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
+msgstr ""
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Location"
-msgstr "Lleoliad"
+msgid "Please fill or check the field below"
+msgstr "Llanwch neu diciwch y maes islaw"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Description"
-msgstr "Disgrifiad"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "Ydych eisiau cadw newidiadau /etc/fstab"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Name of printer"
-msgstr "Enw'r argraffydd"
+msgid "Boot Protocol"
+msgstr "Protocol Cychwyn"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Mae pob argraffydd angen enw (e.e. \"argraffydd\". Nid oes angen llanw "
-"meysydd Disgrifiad a Lleoliad. Lle ar gyfer sylwadau'r defnyddiwr sydd yma."
+msgid "LVM-disks %s\n"
+msgstr "Dias LVM %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr "Rhowch Enw'r Argraffydd a Sylw"
+msgid "The package %s is needed. Install it?"
+msgstr "Rhaid cael pecyn %s. Ydych chi am ei osod?"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr "Gwneud porth argraffu ar gael ar gyfer CUPS..."
+msgid "On boot"
+msgstr "Cychwyn"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Checking device and configuring HPOJ..."
-msgstr "Gwirio'r ddyfais a ffurfweddu HPOJ..."
+msgid "Bus identification"
+msgstr "Dynodiad bws"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr "Mynediad i gerdyn cof ffoto ar eich dyfais HP amlbwrpas"
+msgid "Please make a backup of your data first"
+msgstr "Gwnewch gopi wrth gefn o'ch data yn gyntaf"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr "Sganio eich dyfais amlbwrpas HP"
+msgid "Vatican"
+msgstr "Vatican"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Installing mtools packages..."
-msgstr "Gosod pecynnau mtools..."
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr "Mae gennych fwy nag un disg caled, ar ba un ydych am osod linux?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Installing SANE packages..."
-msgstr "Gosod pecynnau SANE..."
+msgid "Boot ISO"
+msgstr "Cychwyn yr ISO"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installing HPOJ package..."
-msgstr "Gosod pecyn HPOJ..."
+msgid "Eritrea"
+msgstr "Eritrea"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
-"A yw eich argraffydd yn ddyfais amlbwrpas gan HP neu Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 gyda sganiwr, Sony IJP-V100), HP "
-"PhotoSmart neu HP LaserJet 2200?"
+msgid "Remove List"
+msgstr "Rhestr Tynnu"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
-msgid "A command line must be entered!"
-msgstr "Rhaid rhoi llinell gorchymyn!"
+msgid "A customizable environment"
+msgstr "Mae modd addasu eich byd..."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Command line"
-msgstr "Llinell orchymyn"
+msgid "Inuktitut"
+msgstr "Inuktitut"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
-"Yma medrwch bennu unrhyw fan lle dylid cyfeirio'r gwaith yn lle ei anfon at "
-"yr argraffydd."
+msgid "Morocco"
+msgstr "Morocco"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pipe into command"
-msgstr "Peipio i orchymyn"
+msgid "Which printer model do you have?"
+msgstr "Pa fath o argraffydd sydd gennych?"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detected model: %s %s"
-msgstr "Canfyddwyd model %s %s"
+msgid "Add a new printer"
+msgstr "Ychwanegu argraffydd newydd"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A valid URI must be entered!"
-msgstr "Rhaid cynnig URI dilys!"
+msgid " All of your selected data have been "
+msgstr " Mae eich dewis data wedi ei "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Printer Device URI"
-msgstr "URI Dyfais Argraffu"
+msgid "<-- Delete"
+msgstr "<-- Dileu"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Medrwch enwi'n benodol URI i gael mynediad i'r argraffydd. Rhaid i'r URI "
-"gyflawni manylyn un ai CUPS neu Foomatic. Sylwer nad yw pob math o URI cyn "
-"cael eu cynnal gan bob sbwlydd ."
+msgid "Nepal"
+msgstr "Nepal"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Port"
-msgstr "Porth"
+msgid "cpu # "
+msgstr "cpu # "
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printer host name or IP"
-msgstr "Enw'r gwesteiwr neu IP yr argraffydd"
+msgid "chunk size"
+msgstr "maint darn"
-#: ../../printer/printerdrake.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "The port number should be an integer!"
-msgstr "Dylai rhif porth fod yn gyfanrif!"
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "gorchmynion cyn cychwyn, neu 'c' am y llinell orchymyn."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Mae enw'r gwesteiwr argraffu neu IP ar goll!"
+msgid "Problems installing package %s"
+msgstr "Anhawster wrth osod pecyn %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"I argraffu i argraffydd TCP neu soced, rhaid i chi ddarparu enw gwesteiwr "
-"neu IP'r argraffydd ac yn ddewisol rhif y porth (Y rhagosodedig yw 9100). Ar "
-"wasanaethwyr HP JetDirect rhif y porth, fel rheol, yw 9100, gall amrywio ar "
-"wasanaethwyr eraill. Gweler llawlyfr eich caledwedd"
+msgid "You will receive an alert if the load is higher than this value"
+msgstr "Byddwch yn derbyn rhybudd os yw'r llwyth yn uwch na'r gwerth hwn"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
msgstr ""
-"Dewiswch un o'r argraffyddion sydd wedi eu awtoganfod o'r rhestr neu rhowch "
-"yr enw gwesteiwr neu IP a'r rhif porth dewisol (9100 yw'r rhagosodedig) i'r "
-"meysydd mewnbwn."
+"\n"
+"\n"
+"I gyflwyno adroddiad gwall, cliciwch ar y botwm adroddiad.\n"
+"Bydd hyn yn agor ffenestr porwr gwe yn https://drakbug.mandrakesoft.com\n"
+" lle welwch ffurflen i'w llenwi. Bydd yr wybodaeth rhowch arno'n cael ei\n"
+"drosglwyddo i'r gwasanaethwr\n"
+"\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "Dewisiadau Argraffydd TCP/Soced"
+msgid "Add a scanner manually"
+msgstr "Ychwanegu sganiwr gyda llaw"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Host \"%s\", port %s"
-msgstr ",Gwesteiwr \"%s\", porth %s"
+msgid "Reload partition table"
+msgstr "Ail-lwytho'r tabl rhaniad"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", gwesteiwr \"%s\", porth %s"
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr "Iawn, rwyf eisiau awto-mewngofnodi gyda (defnyddiwr, bwrdd gwaith)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Scanning network..."
-msgstr "Chwilio'r rhwydwaith..."
+msgid "Search for fonts in installed list"
+msgstr "Chwilio am ffontiau yn y rhestr gosod"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Printer auto-detection"
-msgstr "Awto ganfod argraffydd"
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr "Nid yw'r Rhwydwaith Leol yn terfynnu gyda '.0', tynnu allan."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "NCP queue name missing!"
-msgstr "Mae enw rhes NCP ar goll"
+msgid "Boot"
+msgstr "Cychwyn"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "NCP server name missing!"
-msgstr "Mae enw gwasanaethwr NCP ar goll!"
+msgid "Tuner type:"
+msgstr "Math o diwniwr"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Print Queue Name"
-msgstr "Enw Rhes Argraffu"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
+msgstr ""
+"Yma byddwn yn dewis system argraffu i'ch cyfrifiadur ei ddefnyddio. Efallai\n"
+"bod systemau eraill yn cynnig un i chi, ond mae Mandrake yn cynnig dwy.\n"
+"Mae 'r systemau'n addas gar gyfer ffurfweddiad arbennig.\n"
+"\n"
+" *\"pdq\" - sy'n golygu \"print, don't queue\", yw'r dewis os oes gennych\n"
+"gysylltiad uniongyrchol Ăą'ch argraffydd a'ch bod eisiau medru tynnu allan o "
+"waith\n"
+"argraffu pan fo'r papur wedi mynd yn sownd ac nad oes gennych argraffyddion\n"
+"wedi eu cysylltu drwy rwydwaith. (\"Dim ond rhwydweithiau syml mae \"pdq\" "
+"yn ei\n"
+"drin ac mae'n araf ar rwydweithiau) Dewiswch \"pdq\" os mai dyma yw eich\n"
+"tro cyntaf yn GNU/Linux.\n"
+" *\"%s\" - \"Common Unix Printing System\". Mae hwn yn dda ar gyfer\n"
+"argraffu i argraffyddion lleol a hanner ffordd rownd y byd. Mae'n symlach, "
+"yn\n"
+"medru gweithredu fel gwasanaethwr neu cleient ar gyfer yr hen system \"lpd"
+"\"\n"
+"felly mae'n cydweddi Ăą'r systemau sydd wedi mynd o'i flaen. Mae'n gallu "
+"gwneud\n"
+"nifer o driciau, ond mae bron mor syml i'w osod \"pdq\". Os ydych amgen "
+"hwn\n"
+"i efelychu gwasanaethwr \"lpd\", yna rhaid cychwyn daemon \"cups-lpd\".\n"
+"Mae gan \"%s\" wyneb graffigol ar gyfer argraffu neu rheoli'r argraffu.\n"
+"\n"
+"Os ydych yn dewis yn awr ac yn ddiweddarach yn penderfynu eich bod\n"
+"am newid eich system argraffu gallwch ei newid drwy gyfrwng PrinterDrake\n"
+"yng Nghanolfan Rheoli Mandrake a chlicio'r botwm arbenigwr."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Printer Server"
-msgstr "Gwasanaethwr Argraffydd"
+msgid "\"Menu\" key"
+msgstr "Bysell \"Dewislen\""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
msgstr ""
-"I argraffu ar argraffydd NetWare, rhaid i chi rhoi enw gwasanaethwr argraffu "
-"NetWare (Sylwer! gall fod yn wahanol i'w enw gwesteiwr TCP/IP) yn ogystal "
-"Ăą'r rhes waith argraffu am yr argraffydd rydych am gael mynediad iddo ac "
-"unrhyw enw defnyddiwr a chyfrinair perthnasol."
+"\n"
+"\n"
+"Gwiriwch os yw Printerdrake wedi awto ganfod eich argraffydd yn gywir. "
+"Chwiliwch am y model cywir pan fo'r cyrchwr yn sefyll ar y model anghywir "
+"neu ar \"Argraffydd bras\"."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "NetWare Printer Options"
-msgstr "Dewisiadau Argraffydd NetWare"
+msgid "Security Administrator:"
+msgstr "Gweinyddwr Diogelwch:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please enter your login"
+msgstr "Rhowch eich mewngofnod"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check permissions of files in the users' home."
+msgstr ""
+"os wedi ei osod i iawn, gwirio caniatĂąd ffeiliau yng nghartref y defnyddiwr."
+
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
msgstr ""
-"Cysylltu eich argraffydd i wasanaethwr Linux a gadael i'ch peiriant/"
-"peiriannau Windows gysylltu iddo fel cleient.\n"
-"\n"
-"Ydych chi am barhau i osod yr argraffydd hwn?"
+"Nid oes gennych cysylltiad Ăą'r Rhyngrwyd.\n"
+"Crëwch un drwy glicio ar 'Ffurfweddu'"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Fonts copy"
+msgstr "CopĂŻo ffontiau"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Automated"
+msgstr "Awtomeiddwyd"
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Do you want to test the configuration?"
+msgstr "Ydych chi eisiau profi'r ffurfweddiad?"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
msgstr ""
-"Gosod eich gwasanaethwr Windows i wneud yr argraffydd ar gael o dan brotocol "
-"IPP a gosod argraffu o'r peiriant hwn gyda'r \"%s\" yn Printerdrake.\n"
-"\n"
+"Cafodd argraffydd \"%s\" ei dynnu'n llwyddiannus o Star Office/OpenOffice."
+"org."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+" to the Internet as a client.\n"
"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
+"High: There are already some restrictions, and more automatic checks "
+"are run every night.\n"
"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
+"Higher: The security is now high enough to use the system as a server "
+"which can accept\n"
+" connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+" should choose a lower level.\n"
"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
+"Paranoid: This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+" features are at their maximum\n"
"\n"
+"Security Administrator:\n"
+" If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+" email)"
msgstr ""
-"Rydych ar fin gosod y modd i argraffu i gyfrif Windows gyda chyfrinair. "
-"Oherwydd gwall ym mhensaernĂŻaeth meddalwedd cleient Samba mae'r cyfrinair yn "
-"cael ei osod mewn testun plaen ar y llinell orchymyn y cleient Samba sy'n "
-"cael ei ddefnyddio i anfon gwaith argraffu i'r gwasanaethwr Windows. Felly "
-"mae'n bosibl i bob defnyddiwr ar y peiriant i arddangos y cyfrinair ar y "
-"sgrĂźn drwy'r gorchymyn \"ps auxwww\".\n"
+"Safonol: Dyma'r safon diogelwch sy'n cael ei argymell ar gyfer cyfrifiadur "
+"i'w ddefnyddio\n"
+" i gysylltu Ăą'r Rhyngrwyd fel cleient.\n"
"\n"
-"Rydym yn argymell eich bod yn defnyddio un o'r dulliau gwahanol hyn ( yn yr "
-"holl achosion hyn, rhaid i chi wneud yn siwr mae dim ond peiriannau o'ch "
-"rhwydwaith lleol chi sydd Ăą mynediad i'ch gwasanaethwr Windows, e.e. drwy "
-"gyfrwng mur cadarn).\n"
+"Uchel: Mae rhai cyfyngiadau eisoes, ac mae gwiriadau'n cael eu rhedeg "
+"bob nos.\n"
"\n"
-"Defnyddio cyfrif heb gyfrinair ar eich gwasanaethwr Windows, defnyddio "
-"cyfrif \"Ymwelydd\" neu gyfrif arbennig ar gyfer argraffu. Peidiwch tynnu "
-"eich amddiffyniad cyfrinair o gyfrif personol na'r cyfrif gweinyddwr.\n"
+"Uchaf: Mae diogelwch yn ddigon uchel i ddefnyddio'r system fel "
+"gwasanaethwr sy'n medru\n"
+" derbyn cysylltiadau o nifer o gleientiau. Os mai eich "
+"peiriant yw'r unig gleient ar y\n"
+" Rhyngrwyd, dylech ddewis lefel is.\n"
"\n"
-"Gosod eich gwasanaethwr Windows i wneud yr argraffydd ar gael o dan brotocol "
-"LPD. Yna gosod argraffu o'r peiriant hwn gyda chyswllt \"%s\" yn "
-"Printerdrake.\n"
+"Paranoia: Mae'n debyg i'r lefel cynt ond mae'r system wedi ei gau'n llwyr a "
+"nodweddion diogelwch\n"
+" ar eu heithaf.\n"
"\n"
+"Gweinyddwr Diogelwch:\n"
+" Os yw'r dewis 'Rhybuddion Diogelwch' wedi ei ddewis, bydd "
+"rhybuddion diogelwch yn cael eu\t anfon i'r defnyddiwr hwn (enw "
+"defnyddiwr neu e-bost)"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "SECURITY WARNING!"
-msgstr "RHYBUDD DIOGELWCH!"
+msgid "Save packages selection"
+msgstr "Cadw'r dewis becynnau"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Samba share name missing!"
-msgstr "Mae enw rhannu Samba ar goll!"
+msgid "Remove the last item"
+msgstr "Tynnu'r eitem olaf"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Rhaid rhoi un ai enw'r gwasanaethwr neu IP'r gwasanaethwr!"
+msgid "User list to restore (only the most recent date per user is important)"
+msgstr ""
+"Rhestr defnyddwyr i'w adfer ( dim ond y diweddaraf yn ĂŽl y defnyddwyr, sy'n "
+"bwysig )"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detected"
-msgstr "Awto ganfyddwyd"
+msgid "No net boot images created!"
+msgstr "Heb greu delweddau cychwyn y rhwyd!"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Workgroup"
-msgstr "Grwp gwaith"
+msgid "use pptp"
+msgstr "defnyddiwch pptp"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Share name"
-msgstr "Rhannu enw"
+msgid "Choose which services should be automatically started at boot time"
+msgstr ""
+"Dewiswch pa wasanaethau ddylai gael eu cychwyn yn awtomatig wrth gychwyn y "
+"cyfrifiadur"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SMB server IP"
-msgstr "IP Gwasanaethwr SMB"
+msgid "Learn how to use this printer"
+msgstr "Gwybod sut i ddefnyddio'r argraffydd"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SMB server host"
-msgstr "Gwasanaethwr gwesteiwr SMB"
+msgid "Configure the network now"
+msgstr "Ffurfweddwch y rhwydwaith"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
-"Os cafodd yr argraffydd ei awtoganfod, dewiswch ef o'r rhestr ac ychwanegu "
-"enw defnyddiwr, cyfrinair a/neu grwp gwaith yn ĂŽl yr angen."
+msgid "Choose a mirror from which to get the packages"
+msgstr "Dewiswch ddrych lle mae modd estyn y pecynnau"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
msgstr ""
-"I argraffu i argraffydd SMB, rhaid darparu enw gwesteiwr SMB (Sylwer! Mi all "
-"fod yn wahanol i'w enw gwesteiwr TCP/IP!) ac o bosibl cyfeiriad IP'r "
-"gwasanaethwr argraffu, yn ogystal Ăą'r enw rhannu ar gyfer yr argraffydd "
-"rydych am gael mynediad iddo ac unrhyw enw defnyddiwr, cyfrinair a "
-"gwybodaeth am grwp gwaith perthynol."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Dewisiadau Argraffydd SMB (Windows 9x/NT)"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Argraffydd \"%s\" ar wasanaethwr \"%s\""
+"Nid yw'r newidiwr maint FAT yn medru trin eich rhaniad.\n"
+"digwyddodd y gwall canlynol: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", argraffydd \"%s\" ar wasanaethwr \"%s\""
+msgid "Which sector do you want to move it to?"
+msgstr "Pa sector hoffech chi symud ato?"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Remote printer name missing!"
-msgstr "Mae enw'r argraffydd pell ar goll!"
+msgid "Do you want to click on this button?"
+msgstr "Ydych chi eisiau clicio ar y botwm hwn?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remote host name missing!"
-msgstr "Mae enw'r gwesteiwr pell ar goll!"
+msgid "Bahamas"
+msgstr "Bahamas"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote printer name"
-msgstr "Enw'r argraffydd pell"
+msgid "Manual configuration"
+msgstr "Ffurfweddiad gyda llaw"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Remote host name"
-msgstr "Enw gwesteiwr pell"
+msgid "search"
+msgstr "chwilio"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
msgstr ""
-"I ddefnyddio argraffydd lpd pell, rhaid darparu enw gwesteiwr gwasanaethwr "
-"yr argraffydd ac enw'r argraffydd ar y gwasanaethwr hwnnw."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Dewisiadau Argraffydd lpd Pell"
+"Mae'r pecyn hwn yn llwytho'r map bysellfwrdd rydych wedi \n"
+"ei ddewis fel yn /etc/sysconfig/keyboard. Mae modd dewis \n"
+"hwn wrth ddefnyddio'r rhaglen wasanaethu kbdconfig. \n"
+"Dylech adael hwn wedi ei alluogi ar gyfer y rhanfwyaf o beiriannau."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Manual configuration"
-msgstr "Ffurfweddiad gyda llaw"
+msgid "Xpmac (installation display driver)"
+msgstr "Xpmac (gyrrwr gosod dangoswr)"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Rhaid dewis/rhoi argraffydd/dyfais!"
+msgid "Zeroconf host name must not contain a ."
+msgstr "Rhaid i enw gwesteiwr Zeroconf beidio cynnwys ."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
msgstr ""
-" (Pyrth paralel: /dev/lp0, /dev/lp1, ..., yn cyfateb i LPT1:, LPT2:, ..., "
-"argraffydd USB cyntaf: /dev/usb/lp0, ail argraffydd USB : /dev/usb/lp1, ...)."
+"Syslog yw'r modd mae llawer o daemonau'n defnyddio i gofnodi \n"
+"negeseuon i ffeiliau cofnod systemau. mae'n syniad da io rhedeg \n"
+"syslog bob tro."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Dewiswch y porth mae'r argraffydd wedi cysylltu iddo."
+msgid "Unknown/Others"
+msgstr "Anhysbys/Eraill"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Dewiswch y porth y mae eich argraffydd wedi cysylltu iddo neu rhowch enw "
-"dyfais/ffeil ar y llinell mewnbwn"
+msgid "No TV Card detected!"
+msgstr "Heb ganfod Cerdyn Teledu!"
+
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Options"
+msgstr "Dewisiadau"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Dewiswch yr argraffydd i drin y gwaith argraffu."
+msgid "The printer \"%s\" is set as the default printer now."
+msgstr "Mae argraffydd \"%s\" wedi ei osod fel yr argraffydd rhagosodedig."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
msgstr ""
-"Dewiswch yr argraffydd rydych am ei osod. Bydd ffurfweddu'r argraffydd yn "
-"digwydd yn awtomatig. Os na chafodd eich argraffydd ei ganfod yn gywir neu "
-"byddai'n well gennych ffurfweddiad unigryw i'ch argraffydd, cychwynnwch "
-"\"Ffurfweddiad gyda Llaw\"."
+"Rydych yn ffurfweddu winprinter laser OKI. Mae'r argraffydd hwn\n"
+"yn defnyddio protocol cyfathrebu arbennig. Dim ond trwy eu cysylltu Ăą'r "
+"porth paralel cyntaf mae modd cael yr argraffydd hwn i weithio. Pan fo eich "
+"argraffydd wedi ei gysylltu i borth arall neu i flwch gwasanaethwr argraffu, "
+"cysylltwch yr argraffydd i'r porth paralel cyntaf cyn argraffu tudalen "
+"brawf. Os na wnewch chi hynny, ni fydd yr argraffydd yn gweithio. Bydd eich "
+"gosodiad ynghylch ymath o gysylltiad yn cael ei anwybyddu gan y gyrrwr."
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr "Dyma restr o argraffyddion wedi eu awtoganfod."
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgstr "Cynnyrch y cpu (ee 8 am Pentiumlll,...]"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr "Does dim dewis arall ar gael ar hyn o bryd"
+msgid "Auto-detected"
+msgstr "Awto ganfyddwyd"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-"Bydd ffurfweddi'r argraffydd yn digwydd yn awtomatig. Os na chafodd eich "
-"argraffydd ei ganfod yn gywir neu byddai'n well gennych ffurfweddiad unigryw "
-"i'ch argraffydd, cychwynnwch \"Ffurfweddiad gyda Llaw\"."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "The following printer was auto-detected. "
-msgstr "Mae'r argraffydd canlynol wedi ei awtoganfod"
+"Rydych ar fin ffurfweddu eich cyfrifiadur i gwasanaethwr PXE fel "
+"gwasanaethwr DHCP a gwasanaethwr\n"
+"TFTP i adeiladu gwasanaethwr gosod.\n"
+"Gyda'r nodwedd hwn bydd cyfrifiaduron eraill ar eich rhwydwaith lleol yn "
+"medru rhannu cyswllt rhyngrwyd y cyfrifiadur hwn.\n"
+"\n"
+"Gwnewch yn siwr eich bod wedi ffurfweddu eich mynediad Rhwydwaith/Rhyngrwyd "
+"gyda drakconnect cyn mynd ymhellach.\n"
+"\n"
+"Sylwer: bydd angen Addasydd Rhwydwaith un-pwrpas i greu Rhwydwaith Lleol "
+"(LAN)."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
-"Dewiswch yr argraffydd i drin y gwaith argraffu neu rhowch enw dyfais/ffeil "
-"ar y ninell mewnbwn"
+"Nid oes lle rhydd ar gyfer yr ymlwythwr 1MB! Bydd y gosodiad yn parhau, ond "
+"i gychwyn y system bydd rhaid i chi greu rhaniad ymlwythwr yn DiskDrake"
#: ../../printer/printerdrake.pm:1
#, c-format
@@ -12269,1104 +12208,784 @@ msgstr ""
"Dewiswch yr argraffydd i'w osod neu rhowch enw dyfais/ffeil ar y ninell "
"mewnbwn"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr "Yn lle hynny, rhowch enw dyfais/ffeil ar y ninell mewnbwn"
+msgid "Refuse"
+msgstr "Gwrthod"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "HFS"
+msgstr "HFS"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
msgstr ""
-"Os nad hwn yw'r un rydych am ei ffurfweddu, rhowch enw dyfais/enw ffeil ar y "
-"llinell mewnbwn."
+"Mae HardDrake yn rhedeg archwiliwr caledwedd, a gall yn ĂŽl \n"
+"eich dewis, ffurfweddu caledwedd newydd neu sydd wedi newid."
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, c-format
-msgid "Available printers"
-msgstr "Argraffyddion ar gael"
+msgid "Remote Printers"
+msgstr "Argraffyddion Pell"
-#: ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "No printer found!"
-msgstr "Heb ganfood argraffydd!"
+msgid "Creating and formatting file %s"
+msgstr "Creu a fformatio ffeil %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "You must enter a device or file name!"
-msgstr "Rhaid cynnig enw dyfais neu ffeil!"
+msgid "if set to yes, check additions/removals of sgid files."
+msgstr "oa wedi ei osod i iawn, gwirio ychwanegiadau/tynnu ffeiliau sgid."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
-"Heb ganfod argraffydd lleol! I osod argraffydd gyda llaw, rhowch enw'r "
-"ddyfais /enw ffeil ar y llinell mewnbwn (Porth Paralel: /dev/lp0, /"
-"dev/,...., cyfatebol i LPT1:, LPT2,..., argraffydd USB 1af: /dev/usb/lp0, "
-"ail argraffydd USB: /dev/usb/lp1,...)."
+"Mae'r HP LaserJet 1000 angen cael ei gadarnwedd wedi ei lwytho i fyny ar ĂŽl "
+"ei gychwyn. Estynnwch y pecyn gyrrwr Windows o safle gwe HP (nid yw'r "
+"gadarnwedd ar CD'r argraffydd yn gweithio) a thynnwch y ffeil cadarnwedd "
+"ohono gan ddadgywasgu 'r ffeil 'exe' gyda rhaglen 'dadzipio' a chwilio am y "
+"ffeil 'sihp1000.img'. CopĂŻo'r ffeil i gyfeiriadur '/etc/printer'. Yna bydd "
+"yn cael ei ganfod gan y sgript llwytho awtomatig a'i lwytho pryd bynnag fydd "
+"yr argraffydd wedi ei gysylltu Ăą'i gychwyn.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Local Printer"
-msgstr "Argraffydd Lleol"
+msgid "Choose an existing LVM to add to"
+msgstr "Dewis LVM presennol i ychwanegu ato"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "USB printer \\#%s"
-msgstr "Argraffydd USB \\#\"%s"
+msgid "xfs restart"
+msgstr "ail gychwyn xfs"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "Argraffydd ar borth paralel \\#\"%s"
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
+"Mae argraffydd \"%s\" yn bodoli eisoes,\n"
+"ydych chi wir eisiau ailysgrifennu ei ffurfweddiad?"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Argraffydd \"%s\" ar wasanaethwr SMB/Windows \"%s\""
+msgid "No partition available"
+msgstr "dim rhaniadau ar gael"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Argraffydd rhwydwaith \"%s\", porth %s"
+msgid "Use the scanners on hosts: "
+msgstr "Defnyddio sganwyr ar westeiwyr:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Detected %s"
-msgstr "Canfyddwyd %s"
+msgid "Unselected All"
+msgstr "Dad ddewis Popeth"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ", argraffydd \"%s\" ar wasanaethwr SMB/Windows \"%s\""
+msgid "Domain Name Resolver"
+msgstr "Datrysydd Enw Parth"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", rhwydwaith argraffu \"%s\", porth %s"
+msgid "Encryption key (again)"
+msgstr "Allwedd amgryptio (eto)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Llongyfarchiadau, mae eich argraffydd wedi ei osod a'i ffurfweddu!\n"
-"\n"
-"Os ydych am ychwanegu, tynnu neu ailenwi argraffydd, neu os ydych am newid y "
-"gosodiadau dewis rhagosodedig (mewnflwch papur, ansawdd y printiad,...0, "
-"dewiswch \"Argraffydd\" yn adran \"Caledwedd\" Canolfan Rheoli Mandrake."
+msgid "Samba share name missing!"
+msgstr "Mae enw rhannu Samba ar goll!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr ""
-"Awtoganfod argraffyddion sy'n gysylltiedig Ăą pheiriannau'n rhedeg Microsoft "
-"Windows"
+msgid "True Type install done"
+msgstr "Wedi gosod True Type"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr ""
-"Awtoganfod argraffyddion sy'n gysylltiedig yn uniongyrchol Ăą'r rhwydwaith "
-"lleol"
+msgid "Detection in progress"
+msgstr "Canfod ar waith"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Awto ganfod argraffyddion sy'n gysylltiedig a'r peiriant hwn"
+msgid "Build Whole Kernel -->"
+msgstr "Adeiladu'r cnewyllyn gyfan -->"
+
+#: ../../install_steps.pm:1
+#, c-format
+msgid "Welcome to %s"
+msgstr "Croeso i %s"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "Rhowch y disg meddal Diweddaru Modiwlau yng ngyrrwr %s"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Bootsplash"
+msgstr "Croeso Cychwyn"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"The following printer\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"%s%s\n"
+"is directly connected to your system"
msgstr ""
+"Mae'r argraffydd canlynol\n"
"\n"
-"Croeso i'r Dewin Gosod Argraffydd\n"
-"\n"
-"Bydd y dewin yn eich cynorthwyo i osod argraffydd(ion) sydd wedi eu cysylltu "
-"Ăą'r cyfrifiadur hwn,\n"
-"\n"
-"Os oes gennych argraffydd(ion) yn gysylltiedig Ăą'r peiriant, cysylltwch nhw "
-"Ăą'r peiriant a'u troi nhw mlaen fel bod modd awtoganfod.\n"
-"\n"
-"Cliciwch \"Nesaf\" pan ydych yn barod, a \"Diddymu\" os nad ydych am osod "
-"eich argraffydd(ion) ar hyn o bryd."
+"%s%s\n"
+"wedi ei gysylltu'n uniongyrchol Ăą'ch system"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Croeso i'r Dewin Gosod Argraffydd\n"
-"\n"
-"Bydd y dewin yn eich cynorthwyo i osod argraffydd(ion) sydd wedi eu cysylltu "
-"Ăą'r cyfrifiadur hwn, yn gysylltiedig Ăą'r rhwydwaith.\n"
-"\n"
-"Os oes gennych argraffydd(ion) yn gysylltiedig Ăą'r peiriant, cysylltwch nhw "
-"Ăą'r peiriant a'u troi nhw mlaen fel bod modd awtoganfod. Hefyd rhaid i "
-"argraffydd(ion) rhwydwaith a'ch peiriannau Windows fod wedi eu cysylltu ac "
-"ymlaen.\n"
-"\n"
-"Sylwer bod awtoganfod argraffyddion ar rwydwaith yn cymryd mwy o amser nag "
-"awtoganfod argraffyddion sy'n gysylltiedig Ăą'r peiriant hwn. Felly, "
-"diffoddwch awto ganfod rhwydwaith pan nad oes mo'i angen.\n"
-"\n"
-"Cliciwch \"Nesaf\" pan ydych yn barod, a \"Diddymu\" os nad ydych am osod "
-"eich argraffydd(ion) ar hyn o bryd."
+msgid "Printer sharing on hosts/networks: "
+msgstr "Rhannu argraffydd ar gwesteiwr/rhwydwaith:"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
"\n"
-"Croeso i'r Dewin Gosod Argraffydd\n"
-"\n"
-"Bydd y dewin yn eich cynorthwyo i osod argraffydd(ion) sydd wedi eu cysylltu "
-"Ăą'r cyfrifiadur hwn,yn gysylltiedig Ăą'r rhwydwaith neu i beiriant Windows "
-"pell.\n"
-"\n"
-"Os oes gennych argraffydd(ion) yn gysylltiedig Ăą'r peiriant, cysylltwch nhw "
-"Ăą'r peiriant a'u troi nhw mlaen fel bod modd awtoganfod. Hefyd rhaid i "
-"argraffydd(ion) rhwydwaith a'ch peiriannau Windows fod wedi eu cysylltu ac "
-"ymlaen.\n"
-"\n"
-"Sylwer bod awtoganfod argraffyddion ar rwydwaith yn cymryd mwy o amser nag "
-"awtoganfod argraffyddion sy'n gysylltiedig Ăą'r peiriant hwn. Felly, "
-"diffoddwch awto ganfod rhwydwaith pan nad oes mo'i angen.\n"
-"\n"
-"Cliciwch \"Nesaf\" pan ydych yn barod, a \"Diddymu\" os nad ydych am osod "
-"eich argraffydd(ion) ar hyn o bryd."
+"Mae'r gorchymyn \"%s\" hefyd yn caniatau i newid y gosodiadau dewis ar gyfer "
+"tasg argraffu penodol. Ychwanegwch y gosodiadau angenrheidiol i'r llinell "
+"gorchymyn, e.e \"%s <file>\". "
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
-"\n"
-" Croeso i'r Dewin Gosod Argraffydd\n"
-"\n"
-"Mae'r dewin yn caniatĂĄu i chi osod argraffyddion lleol neu bell i'w "
-"defnyddio o'r peiriant hwn a hefyd gan argraffyddion eraill ar eich "
-"rhwydwaith.\n"
-"\n"
-"Bydd yn gofyn am yr holl wybodaeth angenrheidiol i osod yr argraffydd a bydd "
-"yn rhoi mynediad i'r holl yrwyr argraffyddion sydd ar gael, dewisiadau "
-"gyrwyr a mathau o gysylltiadau argraffyddion."
+"Mewn rhai achosion, mae gyrrwr %s angen gwybodaeth ychwanegol i weithio'n\n"
+"gywir, er fel rheol mae'n gweithio'n iawn hebddo. Hoffech chi enwi'r "
+"dewisiadau\n"
+"ychwanegol ar ei gyfer neu adael i'r gyrrwr archwilio'r peiriant am y "
+"wybodaeth mae\n"
+"ei angen? Weithiau bydd yr archwilio'n atal y peiriant, ond ni ddylai achosi "
+"unrhyw\n"
+"ddifrod."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Not the correct CD label. Disk is labelled %s."
+msgstr "Nid yr label CD cywir. Disg wedi ei labelu %s."
+
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
"\n"
+"%s\n"
"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
+"Click on Configure to launch the setup wizard."
msgstr ""
+"Croeso i'r Gwasanaeth Rhannu Cysylltiad Ăą'r Rhyngrwyd\n"
"\n"
+"%s\n"
"\n"
-"Nid oedd Printerdrake yn medru adnabod eich argraffydd %s. Dewiswch yr un "
-"cywir o'r rhestr."
+"Cliciwch Ffurfweddu i gychwyn y dewin gosod."
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid ")"
-msgstr ")"
+msgid "Cuba"
+msgstr "Ciwba"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on "
-msgstr "ar "
+msgid "Searching for new printers..."
+msgstr "Chwilio am argraffyddion newydd..."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "("
-msgstr "("
+msgid "Belize"
+msgstr "Belize"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configuring printer ..."
-msgstr "Ffurfweddu argraffydd ..."
+msgid " (multi-session)"
+msgstr "(aml-sesiwn)"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Searching for new printers..."
-msgstr "Chwilio am argraffyddion newydd..."
+msgid "Kernel Boot Timeout"
+msgstr "Goramser cychwyn y cnewyllyn"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"NODYN: Yn dibynnu ar yr argraffydd a'r system argraffu bydd hyd at %d MB o "
-"feddalwedd ychwanegol yn cael ei osod."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr "Ydych chi'n siwr eich bod am osod argraffu ar y peiriant hwn?\n"
+"Mae eich cerdyn yn medru cael cefnogaeth cyflymu caledwedd 3D ond dim ond "
+"gyda XFree %s.\n"
+"Mae eich cerdyn yn cael ei gynnal gan XFree %s efallai bod gwell cefnogaeth "
+"mewn 2D."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Ydych chi am alluogi argraffu ar yr argraffyddion enwwi'r uchod?\n"
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "Daeth dewin Rhannu DrakX o hyd i'r atebion canlynol:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "Ydych chi am alluogi argraffu ar argraffydd mewn rhwydwaith leol?\n"
+msgid "Hungarian"
+msgstr "Hwngaraidd"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
-msgstr ""
-"Ydych chi am ganiatĂĄu argraffu ar yr argraffyddion enwir uchod neu ar yr "
-"argraffyddion ar y rhwydwaith lleol?\n"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
msgstr ""
-"(Gwnewch yn siwr bod eich argraffyddion wedi eu cysylltu a'u troi mlaen).\n"
+"Dewiswch eich darparwr.\n"
+"Os nad yw ar eich rhestr, dewiswch Heb ei Restri"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr ""
-"Nid oes unrhyw argraffydd wedi ei ganfod wedi ei gysylltu'n uniongyrchol "
-"Ăą'ch cyfrifiadur"
+msgid "Automatic time synchronization (using NTP)"
+msgstr "Cydweddi amser awtomatig (defnyddio NTP)"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-"\n"
-"Mae yna %d argraffydd anhysbys wedi eu cysylltu'n uniongyrchol Ăą'ch system"
+msgid "8 MB"
+msgstr "8 MB"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"Mae un argraffydd anhysbys wedi ei gysylltu'n uniongyrchol Ăą'ch system"
+msgid "LDAP Server"
+msgstr "Gwasanaethwr LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
msgstr ""
-"Mae'r argraffydd canlynol\n"
-"\n"
-"%s%s\n"
-"wedi ei gysylltu'n uniongyrchol Ăą'ch system"
+"Mae cynhaliaeth PCMICA fel rheol ar gyfer cynnal pethau fel \n"
+"ethernet a modem mewn gliniadur. Ni fydd yn cychwyn heb ei \n"
+"ffurfweddu i wneud hynny, felly mae'n ddiogel ei gael ar beiriannau \n"
+"sydd ddim ei angen."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"Mae'r argraffydd canlynol\n"
-"\n"
-"%s%s\n"
-"wedi ei gysylltu'n uniongyrchol Ăą'ch system"
+msgid "Choose your country"
+msgstr "Dewiswch eich gwlad"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The following printers\n"
"\n"
-"%s%s\n"
-"are directly connected to your system"
+"- System Files:\n"
msgstr ""
-"Mae argraffyddion canlynol\n"
"\n"
-"%s%s\n"
-"wedi eu cysylltu'n uniongyrchol Ăą'ch system"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "and %d unknown printers"
-msgstr "a %d argraffydd anhysbys"
+"- Ffeiliau System: \n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "and one unknown printer"
-msgstr "ac un argraffydd anhysbys"
+msgid "Standalone Tools"
+msgstr "Offer Unigol"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Checking your system..."
-msgstr "Gwirio eich system..."
+msgid "Where"
+msgstr "Lle"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Restarting CUPS..."
-msgstr "Ail gychwynCUPS"
+msgid "but not matching"
+msgstr "ond heb fod yn cydweddu"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
msgstr ""
-"Mae'r gwesteiwr ar y rhestr yn barod, does dim modd ei ychwanegu eto.\n"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr "Esiamplau cywir ar gyfer IP:\n"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Nid yw'r IP'n gywir.\n"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Server IP missing!"
-msgstr "IP'r gwasanaethwr ar goll!"
+"Yma medrwch ddewis gyrrwr arall (un ai OSS neu ALSA) ar gyfer eich cerdyn "
+"sain (%s)"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr ""
-"Os nad oes porth yn cael ei gynnig, bydd 631 yn cael ei gymryd fel y "
-"rhagosodedig."
+msgid "Configuring PCMCIA cards..."
+msgstr "Ffurfweddu cardiau PCMCIA..."
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr ""
-"Rhowch gyfeiriad IP a porth gwesteiwr yr argraffydd rydych am ei ddefnyddio."
+msgid "kdesu missing"
+msgstr "kdesu ar goll"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Mynediad at argraffydd ar wasanaethwr CUPS pell"
+msgid "Encryption key"
+msgstr "Allwedd amgryptio"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Remove selected server"
-msgstr "Tynnu'r gwesteiwr"
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Edit selected server"
-msgstr "Golygu'r gwesteiwr"
+msgid "Christmas Island"
+msgstr "Christmas Island"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add server"
-msgstr "Ychwanegu gwasanaethwr"
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr "Methodd gosod cychwynnydd. Digwyddodd y gwall canlynol:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
-"Ychwanegwch y gwasanaethwyr CUPS yr argraffwyr rydych am eu defnyddio. Bydd "
-"angen gwneud hyn dim ond os nad yw'r gwasanaethwyr yn darlledu eu gwybodaeth "
-"argraffu i'r rhwydwaith leol."
+msgid "EIDE/SCSI channel"
+msgstr "Sianel EIDE/SCSI"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "IP address of host/network:"
-msgstr "Cyfeiriad IP gwesteiwr/rhwydwaith"
+msgid "Set this printer as the default"
+msgstr "Gosod yr argraffydd fel y rhagosodedig"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
-"Mae'r gwesteiwr/rhwydwaith ar y rhestr yn barod, does dim modd ei "
-"ychwanegu.\n"
+msgid "partition %s"
+msgstr "rhaniad %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr "Nid yw IP'r gwesteiwr/rhwydwaith yn gywir.\n"
+msgid "Paranoid"
+msgstr "Paranoia"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Host/network IP address missing."
-msgstr "Cyfeiriad y gwestriwr/rhwydwaith ar goll."
+msgid "NIS"
+msgstr "NIS"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr ""
-"Dewis y rhwydwaith neu westeiwr ddylai'r argraffyddion lleol fod ar gael "
-"iddynt:"
+msgid "<-- Del User"
+msgstr "<-- Dileu Defndyddiwr"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Sharing of local printers"
-msgstr "Rhannu argraffyddion lleol"
+msgid "Location on the bus"
+msgstr "Lleoliad ar y bws"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove selected host/network"
-msgstr "Tynnu'r gwesteiwr/rhwydwaith"
+msgid "No printer found!"
+msgstr "Heb ganfood argraffydd!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Edit selected host/network"
-msgstr "Golygu'r gwesteiwr/rhwydwaith"
+msgid "the vendor name of the device"
+msgstr "enw gwerthwr y ddyfais"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Add host/network"
-msgstr "Ychwanegu gwesteiwr/rhwydwaith"
+msgid "Erase entire disk"
+msgstr "Dileu'r ddisg gyfan"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
-"Dyma'r cyfrifiaduron a rhwydweithiau ddylai'r argraffydd(ion) lleol fod ar "
-"gael:"
+msgid " (Default)"
+msgstr "(Rhagosodedig)"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
msgstr ""
-"Pan mae'r dewis yma ar gael, gwneud yn siwr wrth gychwyn CUPS fod\n"
-"\n"
-"- os yw LPD/LPRng wedi ei osod, na fydd CUPS yn ysgrifennu dros /etc/"
-"printcap\n"
-"\n"
-"- os yw /etc/cups/cupsd.conf ar goll, bydd yn cael ei greu\n"
-"\n"
-"- pan mae gwybodaeth am argraffydd yn cael ei ledaenu, nid yw'n cynnwys "
-"\"localhost\" fel enw gwasanaethwr.\n"
+"Ymresymiadau: ()\n"
"\n"
-"Os yw rhai o'r rhain yn achosi anhawster, diffoddwch y dewis hwn, ond bydd "
-"rhaid i chi ofalu amdanynt."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "Cywiro cyswllt CUPS yn awtomatig"
+"Os yw SERVER_LEVEL (or SECURE_LEVEL if absent) yn fwy na 3\n"
+" yn /etc/security/msec/security.conf, creu'r symlink /etc/security/msec/"
+"server\n"
+"i bwyntio at /etc/security/msec/server.<SERVER_LEVEL>. Mae /etc/security/"
+"msec/server\n"
+"yn cael ei ddefnyddio gan chkconfig --ychwanegu at i benderfynnu ychwnaegu "
+"gwasanaeth\n"
+"os yw ar gael yn y ffeil during the installation of packages."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-"Drwy gychwyn hwn bydd yn caniatau argraffu testun plaenyn yr iaeth "
-"Siapanaeeg. Defnyddiwch hwn os ydych wir angen argraffu testun yn "
-"Siapanaeeg, oherwydd os ydych yn ei dderfnyddio ni fydd modd argraffu nodau "
-"acennog mewn ffontiau lladin ragor ac ni fydd modd newid ymyl tudalen na "
-"maint ffontiau, ag ati. Mae hyn yn effeithio ar argraffyddion sydd wedi eu "
-"diffinio ar y cyfrifiadur hwn. Os ydych am argraffu testun siapanaeeg ar "
-"argraffydd sy'n gysylltiedig Ăą chyfrifiadur pell, bydd angen cychwyn y "
-"nodwedd ar y cyfrifiadur hwnnw."
+msgid "Automatic reconfiguration"
+msgstr "Ail ffurfweddiad awtomatig"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Japanese text printing mode"
-msgstr "Modd argraffu testun Siapanaeëg"
+msgid "Receiving Speed:"
+msgstr "Derbyn Cyflymder"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
-"I gael mynediad at argraffyddion ar wasanaethwyr CUPS pell yn eich "
-"rhwydwaith lleol dim ond angen i chi gychwyn yr dewis \"Canfod "
-"argraffyddion ar gyfrifiaduron pell\" ; bydd y gwasanaethwyr CUPS yn dweud "
-"wrth eich cyfrifiadur am eu argraffydd. Mae pob argraffydd sy'n hysbys i'ch "
-"cyfrifiadur yn cael ei restri yn adran \"Argraffyddion pell\" prif ffenestr "
-"Printerdrake. Os yw/nad yw eich gwasanaethwr(wyr) CUPS ar eich rhwydwaith "
-"lleol rhaid rhoi cyfeiriad(au) IP ac yn ddewisol rhif(au) porth yma i gael "
-"gwybodaeth am yr argraffydd gan y gwasanaethwr(wyr)."
+msgid "Turks and Caicos Islands"
+msgstr "Turks and Caicos Islands"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "None"
-msgstr "Dim"
+msgid "permissions"
+msgstr "caniatadau"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Additional CUPS servers: "
-msgstr "Gasanaethwyr CUPS ychwanegol:"
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
-#, c-format
-msgid "No remote machines"
-msgstr "Dim cyfrifiaduron pell"
+msgid "<- Previous"
+msgstr "<- Cynt"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Custom configuration"
-msgstr "Ffurfweddiad addasu"
+msgid "Internet Connection Sharing configuration"
+msgstr "Ffurfweddiad Rhannu Cysylltiad Ăą'r Rhyngrwyd"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Rhannu argraffydd ar gwesteiwr/rhwydwaith:"
+msgid "Toggle between flat and group sorted"
+msgstr "Newid rhwng gwastad a'r grwp wedi ei ddidoli"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr "Canfod argraffyddion ar gyfrifiaduron pell, yn awtomatig."
+msgid "Themes"
+msgstr "ThemĂąu"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr "Mae' argraffyddion y cyfrifiadur hwn ar gael ar gyfer rhai eraill"
+msgid "Options: %s"
+msgstr "Dewisiadau: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
-"Medrwch benderfynu a ddylai argraffydd ar gyfrifiadur pell fod ar gael ar "
-"gyfer y cyfrifiadur hwn."
+"Rydych yn defnyddio %s fel rheolwr cychwyn.\n"
+"Cliciwch Ffurfweddu i gychwyn dewin gosod"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
-msgstr ""
-"Yma medrwch benderfynu a ddylai'r argraffyddion sy'n gysylltiedig Ăą'r "
-"cyfrifiadur hwn fod ar gael i gyfrifiaduron pell a pha rai."
+msgid "OKI winprinter configuration"
+msgstr "Ffurfweddiad OKI winprinter "
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "CUPS printer configuration"
-msgstr "Ffurfweddiad argraffydd CUPS "
+msgid "Saint Helena"
+msgstr "Saint Helena"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
-msgstr "Awtoganfod argraffydd (Argraffyddion lleol, TCP/Socket, ac SMB)"
+msgid "Security Level"
+msgstr "Lefel Diogelwch"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
+"Some steps are not completed.\n"
"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
msgstr ""
+"Nid yw rhai camau wedi eu cwblhau.\n"
"\n"
-"Nid oes angen ffurfweddu argraffyddion ar wasanaethwyr CUPS pell: byddant yn "
-"cael eu canfod yn awtomatig."
+"Ydych chi wir eisiau gorffen?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "How is the printer connected?"
-msgstr "Sut mae'r argraffydd wedi ei gysylltu?"
+msgid "Sudan"
+msgstr "Swdan"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Select Printer Connection"
-msgstr "Dewiswch Gysylltiad Argraffydd"
+msgid "Polish (qwertz layout)"
+msgstr "Pwylaidd (gosodiad qwerty)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
-"Mae'r HP LaserJet 1000 angen cael ei gadarnwedd wedi ei lwytho i fyny ar ĂŽl "
-"ei gychwyn. Estynnwch y pecyn gyrrwr Windows o safle gwe HP (nid yw'r "
-"gadarnwedd ar CD'r argraffydd yn gweithio) a thynnwch y ffeil cadarnwedd "
-"ohono gan ddadgywasgu 'r ffeil 'exe' gyda rhaglen 'dadzipio' a chwilio am y "
-"ffeil 'sihp1000.img'. CopĂŻo'r ffeil i gyfeiriadur '/etc/printer'. Yna bydd "
-"yn cael ei ganfod gan y sgript llwytho awtomatig a'i lwytho pryd bynnag fydd "
-"yr argraffydd wedi ei gysylltu Ăą'i gychwyn.\n"
+msgid "Syria"
+msgstr "Syria"
-#: ../../security/help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
#, c-format
msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the user umask."
-msgstr ""
-"Ymresymiadau: (umasg)\n"
+"Welcome to %s the operating system chooser!\n"
"\n"
-"Gosod umasg y defnyddiwr"
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (val)\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
"\n"
-"Set the shell timeout. A value of zero means no timeout."
msgstr ""
-"Ymresymiadau: (val)\n"
-"\n"
-"Gosod amser allan y gragen. Gwerth sero'n golygu dim amser allan."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (size)\n"
+"Croeso i %s y dewiswr systemau gweithredu! \n"
"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-"Ymresymiad: (size)\n"
+"Dewiswch system weithredu o'r rhestr uchod neu\n"
+"arhoswch %d eiliad am gychwyn rhagosodedig\n"
"\n"
-"Gosod maint hanes gorchymyn cragen. Gwerth -1 yn golygu diderfyn."
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr "oa wedi ei osod i iawn, gwirio ychwanegiadau/tynnu ffeiliau sgid."
+msgid "Portuguese"
+msgstr "Portiwgalaidd"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check open ports."
-msgstr "os wedi ei osod i iawn, gwirio pyrth agored."
+msgid "Loopback file name: "
+msgstr "Enw ffeil cylch-ĂŽl"
-#: ../../security/help.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
-"os wedi ei osod, anfon yr adroddiad e-bost i'r cyfeiriad e-bost neu ei anfon "
-"i'r gwraidd."
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "Dylai cyfeiriad DNS fod mewn fformat 1.2.3.4"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr "os wedi ei osod i iawn, adrodd y gwirio drwy e-bost"
+msgid "Serbia"
+msgstr "Serbia"
-#: ../../security/help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
-"os wedi ei osod i iawn, gwirio ffeiliau/cyfeiriaduron ysgrifenadwy gan bawb."
+msgid "Newzealand"
+msgstr "Zeland Newydd"
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr "os wedi ei osod i iawn, adrodd adroddiadau gwirio i tty."
+msgid "This directory should remain within the root filesystem"
+msgstr "Dylai'r cyfeiriadur aros o fewn y system ffeilio gwraidd"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr "os wedi ei osod i iawn, gwirio yn erbyn y gronfa ddata rpm."
+msgid "CapsLock key"
+msgstr "Bysell CapsLock"
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
-"os wedi ei osod i iawn, gwirio os yw'r dyfeisiau rhwydwaith mewn modd cymysg"
+msgid "Install bootloader"
+msgstr "Gosod cychwynnwr"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr "os wedi ei osod i iawn, gwirio gyda chkrootkit."
+msgid "Select the memory size of your graphics card"
+msgstr "Dewiswch faint y cof eich cerdyn graffeg"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
-"os wedi ei osod i iawn, gwirio caniatĂąd ffeiliau yng nghartref y defnyddiwr."
+"[OPTIONS]\n"
+"Rhaglen Cyswllt a Monitro'r Rhwydwaith a'r Rhyngrwyd\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr ""
-"os wedi ei osod i iawn, , gwirio ychwanegu/tynnu ffeiliau gwraidd suid."
+msgid "Dynamic IP Address Pool:"
+msgstr "Pwll Cyfeiriad IP dynameg"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr "os wedi ei osod i iawn, adrodd y gwirio i syslog."
+msgid "LVM name?"
+msgstr "Enw LVM"
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
-msgstr ""
-"os wedi ei osod i iawn, gwirio am gyfrinair gwag, neu un arall ddyllai fod "
-"yn /etc/shadow neu eraill gyda enw 0."
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
+msgstr "Cafodd rhai dyfeisiau yn nosbarth caledwedd\"%s\" eu tynnu:\n"
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr "os wedi ei osod i iawn, rhedeg y gwiriadau diogelwch dyddiol."
+msgid "Found %s %s interfaces"
+msgstr "Wedi canfod rhyngwynebau %s %s"
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr "os wedi ei osod i iawn, gwirio checksum y ffeiliau suid/sgid."
+msgid "sticky-bit"
+msgstr "sticky-bit"
-#: ../../security/help.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr "os wedi ei osod i iawn, gwirio cyfrinair gwag y /etc/shadow."
+msgid "Post Install"
+msgstr "Wedi'r Gosod"
-#: ../../security/help.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "if set to yes, report unowned files."
-msgstr "os wedi ei osod i iawn, adrodd ar ffeiliau heb berchennog."
+msgid "The internal domain name"
+msgstr "Enw'r parth mewnol"
-#: ../../security/help.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the root umask."
-msgstr ""
-"Ymresymiadau: (umask)\n"
-"\n"
-"Gosod gwraidd umask."
+msgid "Card IRQ"
+msgstr "IRQ y cerdyn"
#: ../../security/help.pm:1
#, c-format
msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
+"Arguments: (umask)\n"
"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+"Set the user umask."
msgstr ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
+"Ymresymiadau: (umasg)\n"
"\n"
-"Gosod lleiafswm hyd cyfrinair a lleiafswm digidau a lleiafswm llythrennau "
-"mawr."
+"Gosod umasg y defnyddiwr"
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
-msgstr ""
-"Ymresymiadau: (arg)\n"
-"\n"
-"Gosod hyd hanes cyfrinair i rwysstro ailddefnyddio'r cyfrinair."
+msgid "logdrake"
+msgstr "logdrake"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
-"Ymresymiadau: (max, inactive=-1)\n"
-"\n"
-"Gosod cyfrinair yn erbyn \\fImax\\fP dyddiau ac oedi i newid i \\fIinactive"
-"\\fP."
+"Rhaglen mewnforio a monitro "
+"ffontiau \n"
+"--windows_import : mewnforio o bob rhaniad windows.\n"
+"--xls_fonts : dangos pob ffont sy'n bodoli o xls\n"
+"--strong : cadarnhad cryf o ffont.\n"
+"--install : derbyn unrhyw ffeil ffont ac unrhyw gyfeiriadur.\n"
+"--uninstall : dadosod unrhyw ffont neu gyfeiriadur ffont.\n"
+"--replace : amnewid pob ffont os yw'n bod\n"
+"--application : 0 dim rhaglen.\n"
+" : 1 pob rhaglen ar gael yn cael ei gynnal.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
-"Ymresymiadau: (name)\n"
-"\n"
-"Ychwanegu'r enw fel eithriad i drin cyfrinair yn erbyn msec."
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
-"Ymresymniadau: (arg)\n"
-"\n"
-"Galluogi/Analluogi sulogin(8 mewn defnydd defnyddiwr unigol."
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "Dewiswch y gyrrwr disg meddal i'w ddefnyddio i greu disg cychwyn"
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
-msgstr ""
-"Ymresymiadau: (arg)\n"
-"\n"
-"Galluogi/Analluogi gwiriad diogelwch dyddiol."
+msgid "LILO with text menu"
+msgstr "LILO gyda dewislen testun"
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
-msgstr ""
-"Ymresymiadau: (arg)\n"
-"\n"
-"Galluogi/Analluogi gwiriad cymysgaredd cardiau ethernet."
+msgid "Everything (no firewall)"
+msgstr "Popeth (dim mur cadarn)"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
-msgstr ""
-"Ymresymiadau: arg)\n"
-"\n"
-"Defnyddio cyfrinair i wirio defnyddiwr."
+msgid "You must specify a kernel image"
+msgstr "Rhaid enwi delwedd cnewyllyn"
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
-"Ymresymiadau: (arg)\n"
-"\n"
-" Galluogu su o aelodau grwp olwyn yn unig neu ganiatĂĄu su o unrhyw "
-"ddefnyddiwr."
+msgid ", multi-function device on USB"
+msgstr ", dyfais amlbwrpas ar USB"
-#: ../../security/help.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
-msgstr ""
-"Ymresymiadau: (arg)\n"
-"\n"
-"Galluogi/Analluogi gwiriad diogelwch msec bob awr."
+msgid "Do"
+msgstr "Gwneud"
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
-"Ymresymiadau: arg)\n"
-"\n"
-"Galluogi?Analluogi mewngofnodi pecynnau anarferol IPv4."
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "Cysylltu Ăą'r drych i estyn y rhestr o becynnau sydd ar gael"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
-"Ymresymiadau: (arg)\n"
-"\n"
-"Galluogi/Analluogi libsafe os yw ar y system."
+msgid "Lithuanian AZERTY (old)"
+msgstr "Lithuenaidd AZERTY (hen)"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
-msgstr ""
-"Ymresymiadau: (arg, alert=1)\n"
-"\n"
-"Galluogi/Analluogi Amddiffyn spwffio IP"
+msgid "Brazilian (ABNT-2)"
+msgstr "Brasilaidd (ABNT-2)"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
-msgstr ""
-"Ymresymiadau: (arg, alert=1)\n"
-"\n"
-"Galluogi/Analluogi amddiffyn spwffio datrys enw. Os yw\n"
-"\\fIalert\\fP yn wir, adrodd i syslog."
+msgid "IP address of host/network:"
+msgstr "Cyfeiriad IP gwesteiwr/rhwydwaith"
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
-"Ymresymiadau: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Galluogi/Analluogi adroddiadau syslog i consol 12. \\fIexpr\\fP yw'r \n"
-"disgrifiad o beth iw' gofnodi (gw. syslog conf(5) am wyboodaeth) a\n"
-"dev y ddyfais i greu cofnod."
+"bar cynnydd cydfesuryn y\n"
+"yn ei gornel uchaf chwith"
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
-msgstr ""
-"Ymresymiadau: (arg)\n"
-"\n"
-"Galluogi/Analluogi crontab ac at ar gyfer defnyddwyr. Rhoi defnyddwyr Ăą "
-"chniatĂąd yn\n"
-"/etc/cron.allow a /etc/at.allow\n"
-" (gw. man yn(1) a crontab(1))."
+msgid "System installation"
+msgstr "Gosod y system"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
-msgstr ""
-"Ymresymiadau: ()\n"
-"\n"
-"Os yw SERVER_LEVEL (or SECURE_LEVEL if absent) yn fwy na 3\n"
-" yn /etc/security/msec/security.conf, creu'r symlink /etc/security/msec/"
-"server\n"
-"i bwyntio at /etc/security/msec/server.<SERVER_LEVEL>. Mae /etc/security/"
-"msec/server\n"
-"yn cael ei ddefnyddio gan chkconfig --ychwanegu at i benderfynnu ychwnaegu "
-"gwasanaeth\n"
-"os yw ar gael yn y ffeil during the installation of packages."
+msgid "Saint Vincent and the Grenadines"
+msgstr "Saint Vincent and the Grenadines"
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
-msgstr ""
-"Ymresymiadau: (arg)\n"
-"\n"
-"CaniatĂĄu i bob gwasanaeth sy'n cael ei reoli gan tcp_wrappers os yw \\fIarg"
-"\\fP = ALL. Dim ond rhai lleol\n"
-"os\\fIarg\\fP = LOCAL a dim os \\fIarg\\fP = NONE. I gnaiatĂĄu'r "
-"gwasanaethausydd angen defnyddiwch /etc/hosts.allow\n"
-"(gw. hosts.allow(5))."
+msgid "/File/_Open"
+msgstr "/Ffeil/_Agor"
#: ../../security/help.pm:1
#, c-format
@@ -13381,1087 +13000,821 @@ msgstr ""
"Mae'r ymresymiad yn pennu os oes gan y defnyddiwr ganiatĂĄd i gysylltu\n"
"gyda'r gwasanaethwr X porth tcp 6000 neu beidio."
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
-msgstr ""
-"Ymresymiadau: (arg, listen_tcp=None)\n"
-"\n"
-"CaniatĂĄu/Gwrthod cysylltiadau X. Ym. cyntaf pennu'r hyn sy'n digwydd\n"
-"aochr y cleient: ALL (caniatĂĄu pob cysylltiad), LOCAL (dim ond\n"
-"cysylltiadau lleol) a NONE (dim cysylltiadau)."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
-"Ymresymiadau: (arg)\n"
-"\n"
-"CaniatĂĄu/Gwrthod rhestr defnyddwyr ar y system ar rheolwyr arddangos (kdm "
-"and gdm)."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
-"Ymredymiadau: (arg)\n"
-"\n"
-"GaniatĂĄu/Gwrthod mewngofnodi gwraidd uniongyrchol."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-msgstr ""
-"Ymredymiadau: (arg)\n"
-"\n"
-"GaniatĂĄu/Gwrthod mewngofnodi gwraidd pell"
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
-"Ymredymiadau: (arg)\n"
-"\n"
-"GaniatĂĄu/Gwrthod ailgychwyn cyfrifiadur gan ddefnyddiwr y consol."
-
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
-"Ymresymiadau: (arg)\n"
-"\n"
-"Os yw \\fIarg\\fP = ALL caniatĂĄ /etc/issue a /etc/issue.net i fodoli. Os yw "
-"\\fIarg\\fP = NONE\n"
-"dim materion heblaw caniatĂĄu /etc/issue."
+msgid "Location of auto_install.cfg file"
+msgstr "Lleoliad ffeil auto_install.cfg"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
-msgstr ""
-"Ymredymiadau: (arg)\n"
-"\n"
-"GaniatĂĄu/Gwrthod awtofewngofnodi."
+msgid "Open Firmware Delay"
+msgstr "Agor Oedi Cadarnwedd"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
-msgstr ""
-"Ymredymiadau: (arg)\n"
-"\n"
-"GaniatĂĄu/Gwrthod atsain icmp."
+msgid "Hungary"
+msgstr "Hwngari"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse broadcasted icmp echo."
-msgstr ""
-"Ymredymiadau: (arg)\n"
-"\n"
-"GaniatĂĄu/Gwrthod darlledu icmp atsain."
+msgid "Total progess"
+msgstr "Cyfanswm y cynnydd"
-#: ../../security/help.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Accept/Refuse bogus IPv4 error messages."
-msgstr ""
-"Ymredymiadau: (arg)\n"
-"\n"
-"GaniatĂĄu/Gwrthod negeseuon gwall IPv4 ffug."
+msgid "Color configuration"
+msgstr "Ffurfweddiad lliw"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "Gweinyddwr Diogelwch (mewngfnodi neu e-bost)"
+msgid "New Zealand"
+msgstr "Seland Newydd"
#: ../../security/level.pm:1
#, c-format
msgid ""
-"A library which defends against buffer overflow and format string attacks."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
msgstr ""
-"Llyfrgell sy'n diogelu rhag gorlif byffer ac ymosodiadau llinellau fformatio."
-
-#: ../../security/level.pm:1
-#, c-format
-msgid "Use libsafe for servers"
-msgstr "Defnyddiwch libsafe ar gyfer gwasanaethwyr"
-
-#: ../../security/level.pm:1
-#, c-format
-msgid "Security level"
-msgstr "Lefel diogelwch"
+"Mae rhai cyfyngiadau, ac mae rhagor o wiriadau awtomatig yn cael eu rhedeg "
+"bob nos"
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose the desired security level"
-msgstr "Dewiswch lefel diogelwch"
+msgid "please choose the date to restore"
+msgstr "dewiswch y data i'w adfer"
-#: ../../security/level.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DrakSec Basic Options"
-msgstr "Dewisiadau Sylfaenol DrakSec"
+msgid "Switching from ext2 to ext3"
+msgstr "Newid o ext2 i ext3"
-#: ../../security/level.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Wedi ei seilio ar y lefel flaenorol, ond mae'r system yn hollol gaeëdig ac "
-"mae nodweddion diogelwch ar eu huchaf."
+msgid "LPRng"
+msgstr "LPRng"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"Gyda'r lefel diogelwch hwn, mae defnydd y system fel gwasanaethwr yn "
-"bosibl.\n"
-"Mae diogelwch yn ddigon uchel i ddefnyddio'r system fel gwasanaethwr sy'n "
-"derbyn\n"
-"cysylltiad gan amryw o gleientiaid. Sylwer: os maei cleient yn unig yw eich "
-"peiriant ar y Rhyngrwyd, yna mae'n well i chi ddewis lefel is."
+msgid "Netherlands Antilles"
+msgstr "Netherlands Antilles"
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Mae rhai cyfyngiadau, ac mae rhagor o wiriadau awtomatig yn cael eu rhedeg "
-"bob nos"
+msgid "Browse to new restore repository."
+msgstr "Pori i'r ystorfa newydd adferwyd"
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
msgstr ""
-"Dyma'r safon sy'n cael ei argymell ar gyfer diogelwch cyfrifiadur fydd yn "
-"cael ei gysylltu Ăą'r Rhyngrwyd fel cleient."
+"\n"
+" Croeso i'r Dewin Gosod Argraffydd\n"
+"\n"
+"Mae'r dewin yn caniatĂĄu i chi osod argraffyddion lleol neu bell i'w "
+"defnyddio o'r peiriant hwn a hefyd gan argraffyddion eraill ar eich "
+"rhwydwaith.\n"
+"\n"
+"Bydd yn gofyn am yr holl wybodaeth angenrheidiol i osod yr argraffydd a bydd "
+"yn rhoi mynediad i'r holl yrwyr argraffyddion sydd ar gael, dewisiadau "
+"gyrwyr a mathau o gysylltiadau argraffyddion."
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Mae'r cyfrinair wedi ei alluogi, ond ni argymhellir ei ddefnyddio fel "
-"cyfrifiadur rhwydwaith."
+msgid "and %d unknown printers"
+msgstr "a %d argraffydd anhysbys"
-#: ../../security/level.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
msgstr ""
-"Rhaid defnyddio'r lefel hwn gyda gofal. Mae'n gwneud eich system yn haws ei\n"
-"ddefnyddio ond mae'n sensitif iawn: rhaid peidio defnyddio'r peiriant i'w\n"
-"gysylltu ag eraill nag i'r Rhyngrwyd. Does dim cysylltiad drwy gyfrinair."
+"Mae gan brosesyddion Pentium cynnar wall yn eu prosesydd pwynt arnofio nad "
+"yw'n ymgyrraedd Ăą'r cywirdeb angenrheidiol wrth berfformio Floating point "
+"DIVision (FDIV)"
-#: ../../security/level.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Paranoid"
-msgstr "Paranoia"
+msgid "No ISDN PCI card found. Please select one on the next screen."
+msgstr "Heb ganfod cerdyn PCI ISDN. Dewiswch un o'r sgrĂźn nesaf."
-#: ../../security/level.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Higher"
-msgstr "Uwch"
+msgid "GB"
+msgstr "GB"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "High"
-msgstr "Uchel"
+msgid "Please give a user name"
+msgstr "Rhowch enw defnyddiwr"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Poor"
-msgstr "Gwael"
+msgid "Enable CD Boot?"
+msgstr "Galluogi cychwyn o CD?"
-#: ../../security/level.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Welcome To Crackers"
-msgstr "Croeso i Crackers"
+msgid " enter `void' for void entry"
+msgstr "rhowch'gwag' am gofnod gwag"
-#: ../../standalone/XFdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Ail fewn gofnodwch i %s i wireddu'r newidiadau"
+msgid "on Hard Drive"
+msgstr "ar Ddisg Caled"
-#: ../../standalone/XFdrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Allgofnodwch ac yna defnyddiwch Ctrl Alt-BackSpace"
+msgid "Winmodem connection"
+msgstr "Cysylltiad Winmodem l"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgid ""
+"\n"
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
msgstr ""
-"Mae /etc/hosts.allow and /etc/hosts.deny wedi eu ffurfweddu - dim newid"
+"\n"
+"Llongyfarchiadau, mae eich argraffydd wedi ei osod a'i ffurfweddu!\n"
+"\n"
+"Os ydych am ychwanegu, tynnu neu ailenwi argraffydd, neu os ydych am newid y "
+"gosodiadau dewis rhagosodedig (mewnflwch papur, ansawdd y printiad,...0, "
+"dewiswch \"Argraffydd\" yn adran \"Caledwedd\" Canolfan Rheoli Mandrake."
-#: ../../standalone/drakTermServ:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "Mae angen creu /etc/dhcpd.conf yn gyntaf"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Set the password history length to prevent password reuse."
+msgstr ""
+"Ymresymiadau: (arg)\n"
+"\n"
+"Gosod hyd hanes cyfrinair i rwysstro ailddefnyddio'r cyfrinair."
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "Aeth rhywbeth o'i le! - ydy mkisofs wedi ei osod?"
+msgid "Now, you can run xawtv (under X Window!) !\n"
+msgstr "Nawr mae modd i chi redeg Xawtv (o dan XWindows)!\n"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr "%s yw'r delwedd ISO etherboot"
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr "Dim digon o le cyfnewid i gyflawni'r gosodiad, ychwanegwch rhagor"
-#: ../../standalone/drakTermServ:1
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No floppy drive available!"
-msgstr "Does dim gyrrwr disg meddal ar gael!"
+msgid "%s on %s"
+msgstr "%s ar %s"
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Floppy can be removed now"
-msgstr "Mae modd tynnu'r disg meddal nawr"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
+"Mae GNU/Linux yn rheoli amser drwy GMT (Greenwich Mean Time)\n"
+"a'i drosi i amser lleol yn ĂŽl y parth amser rydych wedi ei ddewis.\n"
+"Mae'n bosib dad-ddewis hyn drwy ddad-ddewis \"Cloc caledwedd wedi ei\n"
+"osod i GMT\" fel bod y cloc caledwedd yr un a chloc y system yr un peth.\n"
+"Mae hyn yn ddefnyddiol pan fo'r peiriant yn westai i system arall megis\n"
+"Windows.\n"
+"\n"
+"Bydd y dewis \"Cydamseriad amser awtomatig\" yn rheoli'r cloc yn awtomatig\n"
+"drwy gysylltu Ăą gwasanaethwr amser ar y Rhyngrwyd. Yn y rhestr sy'n cael ei\n"
+"gynnig dewiswch yr agosaf atoch. Rhaid i'ch cyswllt Ăą'r we fod yn gweithio\n"
+"i hyn ddigwydd. Bydd yn gosod ar eich peiriant wasanaethwr amser fydd\n"
+"o ddewis yn medru cael ei ddefnyddio gan beiriannau eraill ar eich "
+"rhwydwaith."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Couldn't access the floppy!"
-msgstr "Maethu cael mynediad i'r disg meddal!"
+msgid "Which is your timezone?"
+msgstr "Pa un yw eich parth amser?"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please insert floppy disk:"
-msgstr "Mewnosodwch ddisg meddal:"
+msgid "Guinea"
+msgstr "Guinea"
-#: ../../standalone/drakTermServ:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Write Config"
-msgstr "Ysgrifenu ffurfweddu"
+msgid "The system is now connected to the Internet."
+msgstr "Mae'r system wedi cysylltu Ăą'r Rhyngrwyd."
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr "Pwll Cyfeiriad IP dynameg"
+msgid "South Georgia and the South Sandwich Islands"
+msgstr "South Georgia and the South Sandwich Islands"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-"Tynnwyd y rhanfwyaf o'r gwerthoedd\n"
-"hyn o'ch system ar waith.\n"
-"Medrwch eu newid yn ĂŽl y galw."
+msgid "Japan (broadcast)"
+msgstr "Siapan (darlledu)"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "Ffurfweddiad Gwasanaethwr dhcpd"
+msgid "Mozambique"
+msgstr "Mozambique"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "IP Range End:"
-msgstr "Diwedd Amrediad IP:"
+msgid "Icon"
+msgstr "Eicon"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "IP Range Start:"
-msgstr "Cychwyn Amrediad IP:"
+msgid "Please choose what you want to backup"
+msgstr "Dewiswch beth rydych am ei gadw wrth gefn"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Name Servers:"
-msgstr "Enwi Gwasanaethwr:"
+msgid "256 colors (8 bits)"
+msgstr "256 lliw (8 did)"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "Domain Name:"
-msgstr "Enw Parth:"
+msgid "Read-write"
+msgstr "Darllen-ysgrifennu"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Broadcast Address:"
-msgstr "Cyfeiriad Darlledu:"
+msgid "Size: %s\n"
+msgstr "Maint: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Subnet Mask:"
-msgstr "Masg Isnet"
+msgid "Hostname: "
+msgstr "Enw gwesteiwr:"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Routers:"
-msgstr "Llwybryddion:"
+msgid "Chunk size %s\n"
+msgstr "Maint darn %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Netmask:"
-msgstr "Netmask:"
+msgid "Build the future of Linux!"
+msgstr "Adeiladu dyfodol Linux!"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Subnet:"
-msgstr "Isnet:"
+msgid "Local Printer"
+msgstr "Argraffydd Lleol"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
msgstr ""
-"Mae angen cychwyn y Rheolwr Dangosydd i'r newid ddigwydd.\n"
-"(ailgychwyn gwasanaeth dm - yn y consol)"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "dhcpd Config..."
-msgstr "Ffurfweddu dhcpd..."
+" Hawlfraint (C) 2001-2002 MandrakeSoft gan DUPONT Sebastien <dupont_s"
+"\\@epita.fr>"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Delete Client"
-msgstr "Diddymu Cleient"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "<-- Edit Client"
-msgstr "<-- Golygu Cleient"
+msgid "ADSL connection"
+msgstr "Cysylltiad ADSL"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add Client -->"
-msgstr "Ychwanegu Cleient -->"
+msgid "No configuration, please click Wizard or Advanced.\n"
+msgstr "Dim ffurfweddiad, cliciwch Dewin neu Uwch.\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Allow Thin Clients"
-msgstr "CaniatĂĄu Cleientiaid Tenau"
+msgid "Error!"
+msgstr "Gwall!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Thin Client"
-msgstr "Cleient Tenau"
+msgid "cable connection detected"
+msgstr "canfyddwyd cysylltiad cebl"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No net boot images created!"
-msgstr "Heb greu delweddau cychwyn y rhwyd!"
+msgid "Permission denied transferring %s to %s"
+msgstr "Gwrthodwyd caniatĂąd wrth drosglwyddo %s i %s"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "type: %s"
-msgstr "math: %s"
+msgid "/_Report Bug"
+msgstr "/_Adrodd ar Wallau"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "<-- Del User"
-msgstr "<-- Dileu Defndyddiwr"
+msgid "Resize"
+msgstr "Newid maint"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add User -->"
-msgstr "Pob Defnyddiwr -->"
+msgid "Dominica"
+msgstr "Dominica"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
-msgstr ""
-"Mae !!! yn dangos bod y cyfrinair yng nghronfa ddata'r system yn\n"
-"wahanol i'r un yng ngronfa ddata'r Gwasanaethwr Terfynell.\n"
-"I fewngofnodi i'r Gwas.Terfynell dileu/ail ychwnaegu'r defnyddiwr."
+msgid "Please enter the device name to use for backup"
+msgstr "Rhowch enw dyfais i'w ddefnyddio ar gyfer cadw wrth gefn"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Delete All NBIs"
-msgstr "Dileu Pob NBI"
+msgid "Resolution: %s\n"
+msgstr "Cydraniad: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "<-- Delete"
-msgstr "<-- Dileu"
+msgid "matching"
+msgstr "cydweddu"
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
#, c-format
-msgid "This will take a few minutes."
-msgstr "Bydd hyn yn cymryd rhai munudau"
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
+msgstr ""
+"Methu cael mynediad i fodiwlau'r cnewyllyn sy'n cyfateb i'ch cnewyllyn chi "
+"(mae ffeil %s ar goll), mae hyn yn golygu, fel arfer, nad yw eich disg "
+"cychwyn yn cydweddu gyda'r cyfrwng Gosod (crëwch ddisg cychwyn meddal newydd)"
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
-msgid "Build All Kernels -->"
-msgstr "Adeiladu pob cnewyllyn -->"
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"Dewiswch y porth cywir. Mae porth \"COM1\" o dan MS Windows yn cael ei alw "
+"yn\n"
+"\"ttyS0\" yn GNU/Linux, e.e."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "No NIC selected!"
-msgstr "Heb ddewis NIC!"
+msgid "The following packages are going to be removed"
+msgstr "Bydd y pecynnau canlynol yn cael eu tynnu"
-#: ../../standalone/drakTermServ:1
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
#, c-format
-msgid "Build Single NIC -->"
-msgstr "Adeiladau NIC unigol -->"
+msgid "Connect to the Internet"
+msgstr "Cysylltu Ăą'r We"
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "No kernel selected!"
-msgstr "Heb ddeiwis cnewyllyn"
+msgid "Use existing partitions"
+msgstr "Defnyddiwch y rhaniadau cyfredol"
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Build Whole Kernel -->"
-msgstr "Adeiladu'r cnewyllyn gyfan -->"
+msgid "Canadian (Quebec)"
+msgstr "Canada (Quebec)"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Boot ISO"
-msgstr "Cychwyn yr ISO"
+msgid "Mouse device: %s\n"
+msgstr "Dyfais llygoden: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Boot Floppy"
-msgstr "Disg Meddal Cychwyn"
+msgid "Reselect correct fonts"
+msgstr "Ailddewis y ffontiau cywir"
-#: ../../standalone/drakTermServ:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
+"Options Description:\n"
"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
-"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
"\n"
msgstr ""
-"Trosolwg drakTermServ\n"
-"\t\t\t \n"
-" - Crea Delwedd Cychwynydd Galluogi Etherboot:\n"
-" \t\tI gychwyn y cnewyllyn drwy etherboot, rhaid creu delwedd "
-"cnewyllyn/initrdrd arbennig.\n"
-" \t\tmae tmkinitrd-net yn gwneud llawer o'r gwaith ac mae drak "
-"termServ yn rhyngwyneb graffigol iddo\n"
-" \t\ti gynorthwyo rheoli/addasuto help manage/customize these "
-"images.\n"
-"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
+"disgrifiad o'r dewisiadau:\n"
"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Byddwch ofalus wrth ddefnyddio cadw wrth gefn ftp, oherwydd\n"
+"dim ond ffeiliau wrth gefn sydd wedi eu hadeiladu sy'n cael eu\n"
+"hanfon at y gwasanaethwr.\n"
+"Felly, rhaid i chi adeiladu eich cadw wrth gefn ar eich disg caled\n"
+"cyn ei anfon i'r gwasanaethwr.\n"
"\n"
-#: ../../standalone/drakTermServ:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"Options\n"
"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
-"\n"
-"\n"
-" Diolch:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+"Yn y diwedd bydd gofyn i chi ddewis os ydych am weld rhyngwyneb graffig\n"
+"wrth gychwyn y cyfrifiadur. Sylwch y bydd y cwestiwn hwn yn cael ei ofyn\n"
+"hyd yn oed os nad ydych yn dewis profi'r ffurfweddiad. Yn amlwg, byddwch\n"
+"am ateb \"Na\" os yw eich peiriant i weithredu fel gwasanaethwr, neu os\n"
+"nad oeddech yn llwyddiannus yn cael eich dangosydd i ffurfweddu'n gywir.."
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
-msgstr ""
-"\n"
-" Hawlfraint (C) 2002 MandrakeSoft\n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
+msgid "We are now going to configure the %s connection."
+msgstr "Rydym am ffurfweddu cysylltiad %s"
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Add/Del Clients"
-msgstr "Ychwanegu/Dileu Cleientiaid"
+msgid "MandrakeExpert Corporate"
+msgstr "MandrakeExpert Corfforaethol"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Add/Del Users"
-msgstr "Ychwanegu/Diddymu Defnyddwyr"
+msgid ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
+msgstr ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" cydraniad XFdrake"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Write protection"
+msgstr "Awto ganfod argraffydd"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "You've not selected any font"
+msgstr "methu cnafod unrhyw ffontiau.\n"
+
+#: ../../steps.pm:1
#, c-format
-msgid "Net Boot Images"
-msgstr "Delweddau Cychwyn y Rhwyd"
+msgid "Language"
+msgstr "Iaith"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "Etherboot Floppy/ISO"
+msgid "Printer model selection"
+msgstr "Dewis model yr argraffydd"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Stop Server"
-msgstr "Atal y Gwasanaethwr"
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
+msgstr ""
+"Wedi newid math raniad %s, bydd yr holl ddata ar y rhaniad yn cael ei golli"
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
#, c-format
-msgid "Start Server"
-msgstr "Cychwyn y Gwasanaethwr"
+msgid "%d seconds"
+msgstr "%d eiliad"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Disable Server"
-msgstr "Analluogi'r Gwasanaethwr"
+msgid "Insert a blank floppy in drive %s"
+msgstr "Rhowch ddisg meddal yng ngyrrwr %s"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Enable Server"
-msgstr "Galluogi'r Gwasanaethwr"
+msgid "A valid URI must be entered!"
+msgstr "Rhaid cynnig URI dilys!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "Ffurfweddiad Gwasanaethwr Terfynell Mandrake"
+msgid "Found \"%s\" interface do you want to use it ?"
+msgstr "Wedi canfod rhyngwyneb \"%s\", hoffech chi ei ddefnyddio?"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Remove the last item"
-msgstr "Tynnu'r eitem olaf"
+msgid "Re-configure interface and DHCP server"
+msgstr "Ail ffurfweddi rhag wyneb a gwasanaethwr DHCP"
-#: ../../standalone/drakautoinst:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Add an item"
-msgstr "Ychwanegu eitem"
+msgid "Sound configuration"
+msgstr "Furfweddiad sain"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Auto Install"
-msgstr "Awto Gosod"
+msgid "Photo test page"
+msgstr "Tudalen prawf llun"
-#: ../../standalone/drakautoinst:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Mae'r disg meddal wedi ei gynhyrchu'n llwyddiannus. \n"
-"Medrwch ail chwarae eich gosodiad."
+msgid "Custom disk partitioning"
+msgstr "Rhannu disg unigol"
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congratulations!"
-msgstr "Llongyfarchiadau!"
+msgid "Enter Printer Name and Comments"
+msgstr "Rhowch Enw'r Argraffydd a Sylw"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"The following printers\n"
"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
+"Mae argraffyddion canlynol\n"
"\n"
-"Croeso\n"
-"\n"
-"Mae paramedrau'r awto osod i'w cael yn yr adran ar y chwith"
+"%s%s\n"
+"wedi eu cysylltu'n uniongyrchol Ăą'ch system"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Creating auto install floppy"
-msgstr "Creu disg meddal awto gosod"
+msgid "type: %s"
+msgstr "math: %s"
-#: ../../standalone/drakautoinst:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "manual"
-msgstr "llaw"
+msgid "Slovakian (QWERTY)"
+msgstr "Slovacaidd (QWERTY)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/draksound:1
#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Dewiswch ar gyfer pob cam a fydd yn ail chwarae fel eich gosodiad, neu a "
-"fydd gyda llaw"
+msgid "No Sound Card detected!"
+msgstr "Heb ganfod Cerdyn Sain!"
-#: ../../standalone/drakautoinst:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "FFurfweddiad Camau Awtomatig"
+msgid "Mouse Port"
+msgstr "Porth Llygoden"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "replay"
-msgstr "ail chwarae"
+msgid ""
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
+msgstr ""
+"Mae angen cychwyn y Rheolwr Dangosydd i'r newid ddigwydd.\n"
+"(ailgychwyn gwasanaeth dm - yn y consol)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Ftp Server"
+msgstr "Gwasanaethwr Ftp"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+"Arguments: (arg)\n"
"\n"
-"Do you want to continue?"
+"Enable/Disable msec hourly security check."
msgstr ""
-"Rydych ar fin ffurfweddu disg meddal Gosod Awtomatig. Mae'r nodwedd hwn "
-"braidd yn beryglus a dylid ei ddefnyddio gyda gofal.\n"
-"\n"
-"Gyda'r hodwedd hwn, bydd modd ailchwarau'r gosodiad ar y cyfrifiadur, gan "
-"eich holi'n rhyngweithiol ar gyfer rhai cammau, er mwyn newid eu "
-"gwerthoedd.\n"
+"Ymresymiadau: (arg)\n"
"\n"
-"Ydych chi eisiau parhau?\n"
-"?"
+"Galluogi/Analluogi gwiriad diogelwch msec bob awr."
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "Ffurfweddwr Awto-Osod"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "%s fonts conversion"
+msgstr "trosi ffontiau pfm"
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Methu canfod ffeil delwedd angenrheidiol '%s'."
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the type of bus on which the mouse is connected"
+msgstr "Math o fws mae eich llygoden wedi cysylltu iddi"
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
#, c-format
-msgid "Error!"
-msgstr "Gwall!"
+msgid "Uganda"
+msgstr "Uganda"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (size)\n"
"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
+"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
+"Ymresymiad: (size)\n"
"\n"
-"Anawsterau Adfer Ffeiliau wrth gefn\n"
-"\n"
-"Yn ystod yr adfer bydd Drakbackup yn gwirio eich holl\n"
-"ffeiliau wrth gefn cyn eu hadfer.\n"
-"Cyn adfer, bydd Drakbackup yn tynnu'r cyfeiriadur\n"
-"gwreiddiol, a byddwch yn colli eich holl ddata. Mae'n\n"
-"bwysig eich bod yn ofalus a pheidio newid y ffeiliau\n"
-"data wrth gefn gyda llaw.\n"
+"Gosod maint hanes gorchymyn cragen. Gwerth -1 yn golygu diderfyn."
-#: ../../standalone/drakbackup:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"options description:\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
"\n"
-msgstr ""
-"disgrifiad o'r dewisiadau:\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
"\n"
-"Byddwch ofalus wrth ddefnyddio cadw wrth gefn ftp, oherwydd\n"
-"dim ond ffeiliau wrth gefn sydd wedi eu hadeiladu sy'n cael eu\n"
-"hanfon at y gwasanaethwr.\n"
-"Felly, rhaid i chi adeiladu eich cadw wrth gefn ar eich disg caled\n"
-"cyn ei anfon i'r gwasanaethwr.\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
"\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"Description:\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
+"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
msgstr ""
-"Disgrifiad:\n"
+"I grynhoi, bydd DrakX yn cyflwyno crynodeb o'r wybodaeth amrywiol\n"
+"sydd ganddo am eich system. Yn ddibynnol ar eich caledwedd, mae'n bosib\n"
+"bod gennych rywfaint o'r nodweddion canlynol. Mae pob cofnod yn cynnwys\n"
+"eitem ffurfweddadwy, a chrynodeb o'r ffurfweddiad presennol. Cliciwch ar y\n"
+"botwm \"Ffurfweddu\" perthnasol i'w newid.\n"
"\n"
-" Mae Drakbackup yn cael ei ddefnyddio i cadw\n"
-" eich ffeiliau system wrth gefn.\n"
-" Yn ystod y ffurfweddiad medrwch ddewis:\n"
-"\t- Ffeiliau system,\n"
-"\t-Ffeiliau defnyddwyr,\n"
-"\t-Ffeiliau eraill.\n"
-"\tneu Eich holl system...ac Arall (megis Rhaniadau Windows)\n"
+" *\"Bysellfwrdd\": gwirio ffurfweddiad map y bysellfwrdd a'i newid os oes "
+"angen.\n"
"\n"
-" Mae Drackbackup yn caniatĂĄu i chi ddefnyddio:\n"
-"\t- Disg Caled.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (gyda awto gychwyn, achub ac awto osod.).\n"
-"\t- FTP.\n"
-"\t-Rsync.\n"
-"\t- Webdav.\n"
-"\t- TĂąp.\n"
+" *\"Gwlad\": gwirio'r dewis iaith. Os nad ydych yn y wlad hon, cliciwch y "
+"botwm\n"
+"\"Ffurfweddu\" a dewis un arall. Os nad yw eich gwlad ar y rhestr gyntaf "
+"i'w\n"
+"dangos, cliciwch y botwm \"Rhagor\" am y rhestr gyflawn o wledydd.\n"
"\n"
-" Mae Drakbackup yn caniatĂĄu i chi adfer eich system i\n"
-" gyfeiriadur o ddewis y defnyddiwr.\n"
+" *\"Parth Amser\": Mae DrakX yn dyfalu eich parth amser yn ĂŽl y wlad rydych\n"
+"wedi ei dewis. Mae modd clicio ar y botwm\"Ffurfweddu\" i'w gywiro.\n"
"\n"
-" Yn rhagosodedig bydd ffeiliau wrth gefn yn cael eu cadw yn eich\n"
-" /var/lib/drakbackup directory\n"
+" *\"Llygoden\": gwirio ffurfweddiad y llygoden bresennol a chlicio ar y "
+"botwm\n"
+"i'w newid os oes angen.\n"
"\n"
-" Ffeil ffurfweddiad:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
+" \"Argraffydd\": bydd clicio ar y botwm \"Ffurfweddu\" yn agor y dewin\n"
+"ffurfweddu argraffydd. Darllenwch y pennawd yn y \"Starter Guide\" ar\n"
+"sut i osod argraffydd newydd. Mae'r rhyngwyneb yn debyg i'r un ar gyfer\n"
+"ei osod yn y man cyntaf.\n"
"\n"
+" *\"Cerdyn sain\": os oes cerdyn sain wedi ei ganfod ar eich system bydd\n"
+"yn cael ei ddangos yma. Os ydych yn sylwi nad y cerdyn sain sy'n cael ei\n"
+"ddangos yw'r un sydd ar eich system, yna cliciwch y botwm a dewis\n"
+"gyrrwr arall.\n"
"\n"
-"Camau wrth adfer:\n"
-" \n"
-" Yn ystod yr adfer bydd Drakbackup yn tynnu\n"
-" eich cyfeiriadur gwreiddiol a gwirio nad yw'r holl \n"
-" ffeiliau wrth gefn wedi eu llygru. Argymhellir i chi \n"
-" gadw wrth gefn cyn adfer.\n"
+" *\"Rhyngwyneb Graffigol\": fel rheol bydd DrakX yn gosod eich rhyngwyneb\n"
+"i gydraniad \"800x600\" neu \"1024x768\". Os nad yw hyn yn addas ar\n"
+"eich cyfer cliciwch y botwm \"Ffurfweddu\" i'w newid.\n"
+"\n"
+" *\"Cerdyn Teledu\": os oes cerdyn teledu wedi ei ganfod ar eich system\n"
+"bydd yn cael ei ddangos yma. Os oes gennych gerdyn ac nid yw wedi cael\n"
+"ei ganfod, cliciwch \"Ffurfweddu\" i geisio ei ffurfweddu Ăą llaw.\n"
+"\n"
+" *\"Cerdyn ISDN\": os oes cerdyn ISDN wedi ei ganfod ar eich system bydd\n"
+"yn cael ei ddangos yma. Mae modd clicio ar \"Ffurfweddu\" i newid y\n"
+"paramedrau sy'n gysylltiedig Ăą'r cerdyn.\n"
+"\n"
+" *\"Rhwydwaith\": os ydych am ffurfweddu eich mynediad i'r Rhyngrwyd neu\n"
+"eich rhwydwaith lleol.\n"
+"\n"
+" *\"Lefel Diogelwch\": mae modd ail ddiffinio'r lefel diogelwch osodwyd yn\n"
+"flaenorol ().\n"
"\n"
+" *\"Mur Cadarn\": mae'n syniad da gosod mur cadarn i'ch amddiffyn rhag\n"
+"ymyriadau os ydych yn bwriadu cysylltu eich cyfrifiadur Ăą'r Rhyngrwyd.\n"
+"Darllennwch y bennod perthnasol yn y \"Starter Guide\" am fanylion\n"
+"gosodiadau mur cadarn.\n"
"\n"
+" *\"Cychwynnydd\": os hoffech newid ffurfweddiad eich cychwynnydd\n"
+"cliciwch y botwm honno. Ar gyfer defnyddwyr profiadol.\n"
+"\n"
+" *\"Gwasanaethau\": yma bydd modd i chi wneud man newidiadau i'r\n"
+"gwasanaethau sy'n cael eu rhedeg ar eich cyfrifiadur. Os ydych yn\n"
+" bwriadu defnyddio'r cyfrifiadur fel gwasanaethwr mae'n syniad da\n"
+"darllen y gosodiadau'n fanwl."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Comoros"
+msgstr "Comoros"
+
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+"\n"
+"\n"
+"\n"
+"We are now going to configure the %s connection.\n"
+"\n"
+"\n"
+"Press OK to continue."
msgstr ""
-" yn diweddaru 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft."
-"com>"
+"\n"
+"\n"
+"\n"
+"Rydym yn awr yn mynd i ffurfweddu cysylltiad %s.\n"
+"\n"
+"\n"
+"Pwyswch Iawn i barhau."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Yaboot mode"
+msgstr "Modd Yaboot"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
+msgstr "UDA (cabl)"
+
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
-" Hawlfraint (C) 2001-2002 MandrakeSoft gan DUPONT Sebastien <dupont_s"
-"\\@epita.fr>"
+"Methu ailgychwyn LiLo!\n"
+"Cychwyn \"lilo\" fel gwraidd ar y linell orchymyn i gwblhau gosod thema "
+"LiLo'n llawn."
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Llygoden 3 Botwm Generig"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Select another media to restore from"
+msgstr "Dewis cyfrwng arall i adfer ohono"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Software Manager"
+msgstr "Rheolwr Meddalwedd"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"restore description:\n"
+"Restore Description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
@@ -14473,17 +13826,19 @@ msgid ""
"\n"
" - Incremental Backups:\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
msgstr ""
"disgrifad o adfer:\n"
@@ -14508,5049 +13863,5732 @@ msgstr ""
"\\n\n"
"\n"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-"disgrifiad o'r dewisiadau:\n"
-"\n"
-"- Ffeiliau system Cadw wrth Gefn\n"
-" \n"
-"\tMae'r dewis hwn yn caniatĂĄu i chi gadw wrth gefn eich\n"
-"\tcyfeiriadur /etc, sy'n cynnwys eich ffeiliau ffurfweddiad.\n"
-"\tByddwch ofalus wrth ei adfer i beidio trosysgrifo:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-"- Ffeiliau Defnyddiwr Cadw wrth Gefn\n"
-"\n"
-"\tMae'r dewis hwn yn caniatĂĄu i chi ddewis pob defnyddiwr\n"
-"\trydych am gadw wrth gefn ar eu cyfer.\n"
-"\tI ddiogelu lle ar ddisg, argymhellir nad ydych yn cadw storfa'r\n"
-"\t porwr.\n"
-" \n"
-"- Cadw Ffeiliau Eraill wrth Gefn\n"
-"\n"
-"\tMae'r dewis hwn yn caniatĂĄu i chi ychwanegu mwy\n"
-"\to ddata i'w gadw. Gyda'r cadw arall wrth gefn nid\n"
-"\tyw'n bosibl ar hyn o bryd i ddewis cadw wrth gefn\n"
-"\tcynyddol.\t\t\n"
-"\n"
-"Cadw wrth Gefn Cynyddol:\n"
-"\n"
-"\tCadw wrth Gefn Cynyddol yw'r dewis mwyaf pwerus.\n"
-"\tMae'r dewis hwn yn caniatĂĄu i chi gadw eich data wrth\n"
-"\tgefn y tro cyntaf ac yna dim ond yr hyn sydd wedi newid.\n"
-"\tYna bydd modd i chi, yn ystod y cam o adfer, adfer eich\n"
-"\tdata o ddyddiad penodol.\n"
-"\tOs nad ydych wedi dewis hwn, bydd yr holl hen ffeiliau\n"
-"\twrth gefn yn cael eu dileu cyn pob cadw wrth gefn. \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr "\n"
+msgid "Re-submit"
+msgstr "Ail-gyflwyno"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-"disgrifiad o'r dewisiadau:\n"
-"\n"
-"Yma mae Drakbackup yn caniatĂĄu i chi newid:\n"
-"\n"
-" - Y modd cywasgu:\n"
-" \n"
-" Os wnewch chi glicio cywasgiad bzip2, byddwch yn \n"
-" cywasgu eich data'n well na gzip (tua 2-10%%).\n"
-" Nid yw'r dewis wedi ei nodi drwy ragosodiad gan fod\n"
-" angen mwy o amser ar y modd cywasgu hwn (tua 1000%% yn fwy).\n"
-"\n"
-"- Y modd diweddaru:\n"
-"\n"
-" Bydd y dewis hwn yn diweddaru eich caw wrth gefn, ond\n"
-" nid yw'r dewis hwn wir yn ddefnyddiol gan fo angen dadgywasgu\n"
-" eich cadw wrth gefn cyn bo modd i chi ei ddiweddaru.\n"
-" \n"
-"- Y modd .backupignore\n"
-" Fel gyda cvs, bydd Drakbackup yn anwybyddu pob cyfeiriad\n"
-" yn ffeiliau .backupignore ym mhob cyfeiriadur.\n"
-" ar wahĂąn i: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
+msgid "CD in place - continue."
+msgstr "CD yn ei le - ewch ymlaen"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Drakbackup"
-msgstr "Drakbackup"
+msgid "KB"
+msgstr "KB"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restore"
-msgstr "Adfer"
+msgid "Network & Internet"
+msgstr "Rhwydwaith a'r Rhyngrwyd"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup Now"
-msgstr "Cadw wrth Gefn Nawr"
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Lithuenaidd \"ffonetig\" QWERTY"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Advanced Configuration"
-msgstr "Ffurfweddiad Uwch"
+msgid "Net Boot Images"
+msgstr "Delweddau Cychwyn y Rhwyd"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Wizard Configuration"
-msgstr "Ffurfweddiad y Dewin"
+msgid "Sharing of local scanners"
+msgstr "Rhannu sganwyr lleol"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "View Backup Configuration."
-msgstr "Edrych ar Ffurfweddiad Cadw wrth Gefn"
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr "Methodd ymholiad Plug'nPlay. Dewiswch y dangosydd cywir"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Backup Now from configuration file"
-msgstr "Cadwch wrth Gefn eich ffeiliau ffurfweddu"
+msgid "Services and deamons"
+msgstr "Gwasanaethau a daemonau"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Drakbackup Configuration"
-msgstr "Ffurfweddiad Drakbackup"
+msgid "Remote host name missing!"
+msgstr "Mae enw'r gwesteiwr pell ar goll!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Total Progress"
-msgstr "Cyfanswm Cynydd"
+msgid "with /usr"
+msgstr "gyda /usr"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sending files..."
-msgstr "Anfon ffeiliau..."
+msgid "Network"
+msgstr "Rhwydwaith"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "files sending by FTP"
-msgstr "anfon ffeil drwy FTP"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgstr ""
+"Awtoganfod argraffyddion sy'n gysylltiedig Ăą pheiriannau'n rhedeg Microsoft "
+"Windows"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup other files"
-msgstr "Cadw'r ffeiliau eraill wrth gefn"
+msgid "This password is too simple"
+msgstr "Mae'r cyfrinair yn rhy syml"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup user files"
-msgstr "Ffeiliau Defnyddiwr Cadw wrth Gefn"
+msgid "Slovakian (QWERTZ)"
+msgstr "Slofacaidd (QWERTZ)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "Backup system files"
-msgstr "Ffeiliau System Cadw wrth Gefn"
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
+"Dyw newid a chreu mewn ieithoedd gwahanol megis Perl, Python, C and C++ "
+"erioed wedi bod mor hawdd diolch i GNU gcc 3 neu'r amgylcheddau datblygiadol "
+"Cod Agored gorau."
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Under Devel ... please wait."
-msgstr "O dan ddatblygiad...arhoswch."
+msgid "Truly minimal install (especially no urpmi)"
+msgstr "Gosodiad bychan iawn (yn arbennig dim urpmi)"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+" Transfer \n"
+"Now"
msgstr ""
-"Ni chanfyddwyd y ffeil ffurfweddu \n"
-"cliciwch Dewin neu Uwch."
+"Trosglwyddo \n"
+"Nawr"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please select data to backup..."
-msgstr "Dewiswch y data i'w gadw wrth gefn..."
+msgid "Use daemon"
+msgstr "Defnyddiwch ddaemon"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
#, c-format
-msgid "Please select media for backup..."
-msgstr "Dewiswch y cyfrwng ar gyfer cadw wrth gefn..."
+msgid "Authentication"
+msgstr "Dilysu"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please select data to restore..."
-msgstr "Dewiswch y data i'w adfer..."
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Ychwanegwchyr argraffydd hwn i Star Office/OpenOffice.org/GIMP"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Mae'r pecynnau canlynol angen eu gosod:\n"
+msgid "Additional CUPS servers: "
+msgstr "Gasanaethwyr CUPS ychwanegol:"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
-"Gwall wrth anfon ffeil drwy FTP.\n"
-" Cywirwch eich ffurfweddiad FTP."
+"Dewiswch un o'r argraffyddion sydd wedi eu awtoganfod o'r rhestr neu rhowch "
+"yr enw gwesteiwr neu IP a'r rhif porth dewisol (9100 yw'r rhagosodedig) i'r "
+"meysydd mewnbwn."
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount %s?"
+msgstr "Lle'r ydych am osod %s?"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Restore Via Network"
+msgstr "Adfer drwy'r Rhwydwaith"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Algeria"
+msgstr "Algeria"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd-size"
+msgstr "Maint intrd"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
-"Gwall wrth ddefnyddio sendmail\n"
-" chafodd eich adroddiad e-bost mo'i anfon\n"
-" Ffurfweddwch eich sendmail"
+"Mewn achos lle mae gwasanaethwyr eraill i'w cael i'ch cerdyn, gyda\n"
+"neu heb gyflymydd 3D, mae cynnig i chi ddewis y gwasanaethwr gorau\n"
+"ar eich cyfer."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Next"
-msgstr "Nesaf"
+msgid "\tBackups use tar and gzip\n"
+msgstr "\tBydd Cadw wrth Gefn yn defnyddio tar a gzip\n"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Previous"
-msgstr "Cynt"
+msgid "2 MB"
+msgstr "2 MB"
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Save"
-msgstr "Gorffen"
+msgid ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
+"[DEWIS]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build Backup"
-msgstr "Adeiladu Cadw wrth Gefn"
+msgid "Setting Default Printer..."
+msgstr "Gosod yr Argraffydd Rhagosodedig"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Restore Progress"
-msgstr "Adfer Cynnydd"
+msgid "Interface %s (using module %s)"
+msgstr "Rhyngwyneb %s (gan ddefnyddio modiwl %s)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Restore From Catalog"
-msgstr "Adfer o'r Catalog"
+msgid "Name: %s\n"
+msgstr "Enw: %s\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Browse to new restore repository."
-msgstr "Pori i'r ystorfa newydd adferwyd"
+msgid "Generating preview ..."
+msgstr "Cynhyrchu rhagolwg..."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "CD in place - continue."
-msgstr "CD yn ei le - ewch ymlaen"
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
+msgstr ""
+"Dylai Frqu gael rhagosodiad k, M neu G (ee \"2.46G\" am donfedd 2.46 GHz ), "
+"neu ychwanegu '0' (sero)."
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Custom Restore"
-msgstr "Adfer Dewisol"
+msgid "serial"
+msgstr "cyfresol"
-#: ../../standalone/drakbackup:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Restore all backups"
-msgstr "Adfer pob cadw wrth gefn"
+msgid "DVD-ROM"
+msgstr "DVD-ROM"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Failed..."
-msgstr "Methodd Adfer..."
+msgid "Georgian (\"Latin\" layout)"
+msgstr "Georgaidd (gosodiad \"Lladinaidd\")"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Files Restored..."
-msgstr "Adferwyd ffeiliau..."
+msgid "Get the best items with Mandrake Linux Strategic partners"
+msgstr "Estynnwch yr eitemau gorau gan bartneriaid strategol Mandrake Linux"
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Path or Module required"
-msgstr "Llwybr neu Fodiwl angenrheidiol"
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
+msgstr ""
+"Medrwch ddarparu ddewisiadau i fodiwl %s.\n"
+"Sylwer: wrth greu unrhyw gyfeiriad bydd angen defnyddio rhagddodiad 0x, e.e. "
+"'0x123'"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Hostname required"
-msgstr "Mae angen enw gwesteiwr"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
+msgstr ""
+"Mae Mandrake Linux 9.1 yn cynnig Canolfan Rheoli Mandrake, offeryn pwerus i "
+"addasu eich cyfrifiadur i'ch defnydd personol chi. Gallwch addasu elfennau "
+"megis lefelau diogelwch, offer ymylol (sgrĂźn, llygoden, bysellfwrdd...), "
+"cysylltiad Ăą'r Rhyngrwyd a llawer mwy!"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Username required"
-msgstr "Mae angen enw defnyddiwr"
+msgid "Kenya"
+msgstr "Kenya"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Password required"
-msgstr "Mae angen cyfrinair"
+msgid "Use ``Unmount'' first"
+msgstr "Defnyddiwch \"Dad-osod\" yn gyntaf"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Host Path or Module"
-msgstr "Llwybr Gwesteiwr neu Fodwil "
+msgid "Installing mtools packages..."
+msgstr "Gosod pecynnau mtools..."
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Host Name"
-msgstr "Enw Gwesteiwr"
+msgid "You must specify a root partition"
+msgstr "Rhaid pennu rhaniad gwraidd"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr "Adfer drwy Protocol Rhwydwaith: %s"
+msgid "first step creation"
+msgstr "creu'r cam cyntaf"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Via Network"
-msgstr "Adfer drwy'r Rhwydwaith"
+msgid "Both Shift keys simultaneously"
+msgstr "Y ddwy fysell Shift gyda'i gilydd"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr "Nid yr label tĂąp cywir. TĂąp wedi ei labelu %s."
+msgid "Select a scanner model"
+msgstr "Dewiswch model sganiwr"
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-"Rhowch y tĂąp gyda label cynnwys%s\n"
-"yn yr gyrrwr tĂąp %s"
+msgid "LPRng - LPR New Generation"
+msgstr "LPRng - LPR New Generation"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore From Tape"
-msgstr "Adfer o DĂąp"
+msgid "Drakbackup Configuration"
+msgstr "Ffurfweddiad Drakbackup"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr "Nid yr label CD cywir. Disg wedi ei labelu %s."
+msgid "Save as.."
+msgstr "Cadw fel..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
msgstr ""
-"Rhowch yr CD gyda label cynnwys%s\n"
-"yn yr gyrrwr CD o dan bwynt gosod /mnt/cdrom"
+"Nid yw'r rhag wyneb hwn wedi ei ffurfweddu eto.\n"
+"Cychwynnwch y dewin ffurfweddi yn y brif ffenestr."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore From CD"
-msgstr "Adfer o'r CD"
+msgid "Korea (North)"
+msgstr "Corea (Gogledd)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup files not found at %s."
-msgstr "Heb ganfod y ffeiliau wrth gefn yn %s."
+msgid "Autologin"
+msgstr "Awtomewngofnodi"
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Change\n"
-"Restore Path"
-msgstr ""
-"Newid\n"
-"Llwybr Adfer"
+msgid "System configuration"
+msgstr "Ffurfweddu'r system"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Domain Admin Password"
+msgstr "Cyfrinair Gweinyddol y Parth"
+
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Files"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
msgstr ""
-"Adfer y Dewis\n"
-"Ffeiliau"
+"Gwnewch y cyfrifiadur yn addas i'ch anghenion diolch i'r 11 rhyngwyneb "
+"defnyddiwr Mandrake Linux y mae modd eu newid yn helaeth: KDE 3.1, Gnome "
+"2.2, WindowMaker, ..."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Configuring printer ..."
+msgstr "Ffurfweddu argraffydd ..."
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
-"Adfer Cofnod\n"
-"Catalog Ddewiswyd"
+"I siugrhau cywirdeb data'r rhaniad ar ĂŽl ailfeintiol'r rhaniad(au),bydd \n"
+"gwiriadau'r system ffeiliau'n cael eu gwneud wrth i chi ail gychwyn Windows "
+"(TM)"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Remove user directories before restore."
-msgstr "Tynnu cyfeiriaduron defnyddiwr cyn adfer."
+msgid "MB"
+msgstr "MB"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-"Gwnewch cadw wrth gefn newydd cyn adfer ( ar gyfer cadw wrth gefn cynyddol "
-"yn unig )"
+msgid "if set to yes, run some checks against the rpm database."
+msgstr "os wedi ei osod i iawn, gwirio yn erbyn y gronfa ddata rpm."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "select path to restore (instead of /)"
-msgstr "dewis llwybr arall i adfer ( yn lle / )"
+msgid "Virgin Islands (British)"
+msgstr "Virgin Islands (British)"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore Other"
-msgstr "Adfer Arall"
+msgid "Bermuda"
+msgstr "Bermuda"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Restore Users"
-msgstr "Adfer Defnyddwyr"
+msgid "click here if you are sure."
+msgstr "cliciwch yma os ydych yn siwr."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore system"
-msgstr "Adfer y system"
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
+msgstr ""
+"Ni chanfyddwyd y ffeil ffurfweddu \n"
+"cliciwch Dewin neu Uwch."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"Dyma'r rhaniadau Linux sydd wedi canfod ar eich disg caled.\n"
+"Gallwch gadw'r dewisiadau sydd wedi eu gwneud gan y dewin, mae'n nhw'n iawn\n"
+"ar gyfer y rhan fwyaf o osodiadau. Os ydych am wneud newidiadau, rhaid i chi "
+"ol eiaf\n"
+"ddiffinio rhaniad gwraidd (\"/\"). Peidiwch dewis rhaniad sy'n rhy fach neu "
+"fyddwch\n"
+"yn methu llwytho digon o feddalwedd. Os hoffech gadw eich data ar raniad "
+"arall,\n"
+"bydd angen i chi greu rhaniad ar gyfer \"/home\"( ond dim ond os oes mwy nag "
+"un\n"
+"rhaniad Linux ar gael)\n"
+"Mae pob rhaniad yn cael ei restri fel hyn: \"Enw\", \"Maint\".\n"
+"\n"
+"Mae \"Enw\" yn cael ei drefnu: \"math o ddisg caled\", rhif y disg caled\",\n"
+"\"rhif rhaniad\" (e.e, \"hda1\").\n"
+"\n"
+"\"Math o ddisg caled\" yw \"hdos mai disg caled IDE sydd gennych a\n"
+"\"sd\" os mai SCSI yw'r disg caled.\n"
+"\n"
+"Mae \"Rhif Disg Caled\" yn llythyren ar ĂŽl \"hd\" neu \"sd\". Ar gyfer\n"
+"disg caled IDE mae:\n"
+"\n"
+" * \"a\" yn golygu \"prif ddisg caled ar y rheolwr IDE cyntaf\",\n"
+"\n"
+" * \"b\" yn golygu \"disg caled gwas ar y rheolwr IDE cyntaf\",\n"
+"\n"
+" * \"c\" yn golygu \"prif ddisg caled ar yr ail reolwr IDE\",\n"
+"\n"
+" * \"d\" yn golygu \"disg caled gwas ar yr ail reolwr IDE\".\n"
+"\n"
+"Gyda disgiau caled SCSI, mae \"a\" yn golygu \"ID SCSI isaf \", a \"b\" yn "
+"golygu\n"
+"\"ID SCSI ail isaf\", ag ati."
+
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Other Media"
-msgstr "Cyfrwng Arall"
+msgid "Remove"
+msgstr "Tynnu"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select another media to restore from"
-msgstr "Dewis cyfrwng arall i adfer ohono"
+msgid "Lesotho"
+msgstr "Lesotho"
-#: ../../standalone/drakbackup:1
+#: ../../ugtk2.pm:1
#, c-format
-msgid "Please enter the directory where backups are stored"
-msgstr "Rhowch y cyfeiriadur lle mae'r ffeiliau wrth gefn yn cael eu cadw"
+msgid "utopia 25"
+msgstr "utopia 25"
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Restore from Hard Disk."
-msgstr "Adfer o'r Ddisg Caled."
+msgid "Pipe job into a command"
+msgstr "Peipio'r gwaith i orchymyn"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Use quota for backup files."
-msgstr "Defnyddiwch y cwota ar gyfer ffeiliau wrth gefn"
+msgid "new dynamic device name generated by core kernel devfs"
+msgstr "enw dyfais deinamig yn cael ei gynhyrchu gan incore kernel devfs"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Rhowch y maint mwyaf\n"
-"i'w ganiatĂĄu ar gyfer Drakbackup"
+msgid "Yes"
+msgstr "Iawn"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the directory to save:"
-msgstr "Rhowch y cyfeiriadur i gadw iddo:"
+msgid "Cote d'Ivoire"
+msgstr "Cote d'Ivoire"
-#: ../../standalone/drakbackup:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Use Hard Disk to backup"
-msgstr "Defnyddiwch y Ddisg Caled ar gyfer cadw wrth gefn"
+msgid "Which protocol do you want to use?"
+msgstr "Pa brotocol ydych chi eisiau ei ddefnyddio?"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "please choose the date to restore"
-msgstr "dewiswch y data i'w adfer"
+msgid "Restore Progress"
+msgstr "Adfer Cynnydd"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Backup the system files before:"
-msgstr "Cadw'r ffeiliau system wrth gefn cyn:"
+msgid "Estonia"
+msgstr "Estonia"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Rhestr defnyddwyr i'w adfer ( dim ond y diweddaraf yn ĂŽl y defnyddwyr, sy'n "
-"bwysig )"
+msgid "Choose the host on which the local scanners should be made available:"
+msgstr "Dewis y gwesteiwr ddylai'r sganiwr lleol fod ar gael iddynt:"
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "OK to restore the other files."
-msgstr "Iawn i adfer ffeiliau eraill"
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
+msgstr ""
+"Mae gennych dwll yn nhabl eich rhaniad ond nid wyf yn medru ei ddefnyddio\n"
+"Yr unig ateb yw i symud eich rhaniadau cynradd fel bo'r twll nesaf at y "
+"rhaniadau estynedig "
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " Restore Configuration "
-msgstr " Adfer y Furfweddiad"
+msgid "Channel"
+msgstr "Sianel"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid " Successfuly Restored on %s "
-msgstr " Ei adfer yn Llwyddiannus ar %s "
+msgid "Add"
+msgstr "Ychwanegu"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid " All of your selected data have been "
-msgstr " Mae eich dewis data wedi ei "
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "Nid oes Rhannu Cysylltiad Ăą'r Rhyngrwyd wedi eu ffurfweddu o'r blaen."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup files are corrupted"
-msgstr "Mae'r ffeiliau wrth gefn wedi eu llygru"
+msgid " Error while sending mail. \n"
+msgstr " Gwall wrth anfon e-bost. \n"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Dad-diciwch hwn neu ei dynnu'r tro nesaf."
+msgid "Keyboard"
+msgstr "Bysellfwrdd"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"List of data corrupted:\n"
-"\n"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-"Rhestr o ddata llwgr:\n"
-"\n"
+"Rhowch yr CD gyda label cynnwys%s\n"
+"yn yr gyrrwr CD o dan bwynt gosod /mnt/cdrom"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"List of data to restore:\n"
-"\n"
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
msgstr ""
-"Rhestr o ddata i'w adfer:\n"
-"\n"
+"Dylai'r raddfa gael rhagosodiad K, M neu G (e.e.\"11M\" am 11M), neu "
+"ychwanegi '0' (sero)."
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Dim ffurfweddiad, cliciwch Dewin neu Uwch.\n"
+msgid "Choose the connection you want to configure"
+msgstr "Dewiiwch y math o gysylltiad rydych am ei ffurfweddu"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "\t-Network by webdav.\n"
-msgstr "\t-Rhwydwaith drwy webday.\n"
+msgid "Please wait, setting security level..."
+msgstr "Arhoswch, gosod lefle diogelwch..."
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t-Rhwydwaith drwy rsync.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
+msgstr "Mandrake Linux 9.1 yw'r platfform datblygu gorau"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Rhwydwaith drwy SSH.\n"
+msgid "Configuring network device %s"
+msgstr "Ffurfweddu dyfais rhwydwaith %s"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Rhwydwaith drwy FTP.\n"
+msgid "activated"
+msgstr "gweithredu"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "\t-Tape \n"
-msgstr "\t-TĂąp \n"
+msgid "Please choose which network interface will be used for the dhcp server."
+msgstr ""
+"Dewiswch pa rhyngwyneb rhwydwaith i'w ddefnyddio ar gyfer y gwasanaethwr "
+"dhcp."
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
+msgid "Finding packages to upgrade..."
+msgstr "Canfod pecynnau i'w uwchraddio"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t-Disg Caled.\n"
+msgid "Mount point: "
+msgstr "Pwynt gosod:"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
-msgstr ""
-"\n"
-"- Daemon (%s) i gynnwys :\n"
+msgid "parse all fonts"
+msgstr "pob ffont"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tBydd Cadw wrth Gefn yn defnyddio tar a gzip\n"
+msgid "With X"
+msgstr "Gyda X"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\t Bydd Cadw wrth gefn yn defnyddio tar a bzip2\n"
+msgid "Multi-head configuration"
+msgstr "Ffurfweddiad amlben"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "\tDo not include System Files\n"
-msgstr "\tPeidiwch cynnwys Ffeiliau System\n"
+msgid "No browser available! Please install one"
+msgstr "Dim porwr ar gael! Gosodawch un"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
"\n"
-"- Options:\n"
+"%s"
msgstr ""
+"Cadw'r newid?\n"
+"Y ffurfweddiad presenol yw:\n"
"\n"
-"-Dewisiadau:\n"
+"%s"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t enw defnyddiwr:%s\n"
-"\t\t ar lwybr: %s \n"
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "Does dim modd defnyddio ReiserFS ar gyfer rhaniadau llai na 32MB"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"- Save via %s on host: %s\n"
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
-"\n"
-"- Cadw drwy %s ar westeiwr: %s\n"
+"Mae'r protocol rwho'n caniatĂĄu i ddefnyddwyr pell gael rhestr o'r \n"
+"holl ddefnyddwyr sydd wedi mewngofnodi ar beiriant sy'n rhedeg \n"
+"daemon rwho (yn debyg i fysedd)."
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "\t\tErase=%s"
-msgstr "\t\tDileu=%s"
+msgid "Domain name"
+msgstr "Enw parth"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-"\n"
-"- Cadw i dĂąp ar ddyfais: %s"
+msgid "Sharing of local printers"
+msgstr "Rhannu argraffyddion lleol"
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
#, c-format
-msgid " (multi-session)"
-msgstr "(aml-sesiwn)"
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgstr "http://www.mandrakelinux.com/en/91errata.php3"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on device: %s"
-msgstr "ar ddyfais: %s"
+msgid "Available printers"
+msgstr "Argraffyddion ar gael"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "RW"
-msgstr "RW"
+msgid "Empty"
+msgstr "Gwag"
-#: ../../standalone/drakbackup:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
-"- Burn to CD"
-msgstr ""
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
"\n"
-"-Llosgi i CD"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
"\n"
-"- Dileu ffeiliau tar y disg caled wedi'r cadw wrth gefn.\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
"\n"
-"Cadw ar Ddisg caled ar lwybr: %s\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+"Monitor\n"
"\n"
-"- Other Files:\n"
-msgstr ""
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
"\n"
-"- Ffeiliau Eraill: \n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- User Files:\n"
+"\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
+"X (sef X System) yw calon rhyngwyneb graffigol GNU/Linux a'r hyn mae'r\n"
+"holl amgylcheddau graffigol (KDE, Gnome, AterStep, WindowMaker, etc)\n"
+"sy'n dod gyda Mandrake Linux yn dibynnu arno.\n"
"\n"
-"- Ffeiliau Defnyddiwr:\n"
+"Byddwch yn derbyn rhestr o baramedrau gwahanol i'w newid i gael\n"
+"y dangosiad graffigol gorau: Cerdyn Graffig\n"
+"\n"
+" Mae'r gosodwr fel rheol yn canfod ac yn ffurfweddu'n awtomatig\n"
+"y cerdyn graffig sydd ar eich cyfrifiadur. Os nad yw hyn yn wir,\n"
+"dewiswch eich cerdyn.\n"
+"\n"
+" Mewn achos lle mae gwasanaethwyr eraill i'w cael i'ch cerdyn, gyda\n"
+"neu heb gyflymydd 3D, mae cynnig i chi ddewis y gwasanaethwr gorau\n"
+"ar eich cyfer.\n"
+"\n"
+"\n"
+"Dangosydd\n"
+"\n"
+" Mae'r gosodwr fel rheol yn canfod ac yn ffurfweddu'n awtomatig\n"
+"y dangosydd sy'n gysylltiedig Ăą'ch cyfrifiadur. Os nad yw hyn yn wir,\n"
+"dewiswch eich dangosydd.\n"
+"\n"
+"Cydraniad\n"
+"\n"
+" Cewch ddewis yma gydraniad a dyfnder lliw rhwng y rhai sydd ar gael\n"
+"ar gyfer eich caledwedd. Dewiswch yr un sydd orau ar eich cyfer (bydd\n"
+"modd newid hynny wedi'r gosod) Mae enghraifft o ffurfweddiad i'w weld\n"
+"ar y dangosydd.\n"
+"\n"
+"Prawf\n"
+"\n"
+" bydd y system yn ceisio agor sgrĂźn graffigol yn unol Ăą'r cydraniad "
+"dewisol.\n"
+"Os ydych yn gweld y neges yn ystod y prawf ac ateb \"Iawn\", yna bydd\n"
+"DrakX yn symud ymlaen i'r cam nesaf. Os nad ydych yn gweld y neges nesaf\n"
+"mae'n golygu fod rhan o'r drefn awtoganfod yn anghywir a bydd y prawf\n"
+"yn dod iben ar Ăąl 12 eiliad, gan ddod a chi nĂŽl i'r ddewislen. Newidiwch y\n"
+"gosodiadau nes i chi gael y sgrĂźn i edrych yn iawn.\n"
+"Dewisiadau\n"
+"\n"
+" Yma cewch ddewis p'un ai i drefnu i'ch cyfrifiadur newid yn awtomatig i\n"
+"rhyngwyneb graffigol wrth gychwyn. Yn amlwg byddwch angen ticio \"Iawn\"\n"
+"os yw eich peiriant i weithredu fel gwasanaethwr, neu os na fuoch yn\n"
+"llwyddiannus yn ffurfweddu'r dangosydd."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "text width"
+msgstr "lled testun"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount device %s?"
+msgstr "Lle'r ydych am osod dyfais %s?"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The default lease (in seconds)"
+msgstr "Les rhagosodedig (mewn eiliadau)"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Interface \"%s\""
+msgstr "Rhyngwyneb \"%s\""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "With basic documentation (recommended!)"
+msgstr "Gyda dogfennaethelfennol (argymhellir!)"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "1 button"
+msgstr "1 botwm"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"- System Files:\n"
+"There are %d unknown printers directly connected to your system"
msgstr ""
"\n"
-"- Ffeiliau System: \n"
+"Mae yna %d argraffydd anhysbys wedi eu cysylltu'n uniongyrchol Ăą'ch system"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
+#, c-format
+msgid "Test"
+msgstr "Prawf"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"Backup Sources: \n"
+"Allow/Forbid direct root login."
msgstr ""
+"Ymredymiadau: (arg)\n"
"\n"
-"Ffynhonell Cadw wrth Gefn:\n"
+"GaniatĂĄu/Gwrthod mewngofnodi gwraidd uniongyrchol."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select user manually"
-msgstr "Dewis defnyddwyr gyda llaw"
+msgid "Korea"
+msgstr "Corea"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Backup Users"
-msgstr "Defnyddwyr Cadw wrth Gwfn"
+msgid "Your choice? (default `%s'%s) "
+msgstr "Eich dewis? (rhagosodedig `%s'%s) "
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Backup system"
-msgstr "System cadw wrth gefn"
+msgid "Raw printer"
+msgstr "Argraffydd bras"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "Dewiswch beth rydych am ei gadw wrth gefn"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "official vendor name of the cpu"
+msgstr "Enw swyddogol gwerthwr y cpu"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "on Tape Device"
-msgstr "ar Ddyfais TĂąp"
+msgid "Vendor"
+msgstr "Gwerthwr"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "on CDROM"
-msgstr "ar CDROM"
+msgid "Interface %s"
+msgstr "Rhagwyneb %s"
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "across Network"
-msgstr "ar draws Rhwydwaith"
+msgid "Configure mouse"
+msgstr "Ffurfweddu llygoden"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "on Hard Drive"
-msgstr "ar Ddisg Caled"
+msgid "Choose the mount points"
+msgstr "Dewiswch y pwyntiau gosod"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Please choose where you want to backup"
-msgstr "Dewiswch i le rydych am gadw ffeiliau wrth gefn"
+msgid "OK"
+msgstr "Iawn"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "More Options"
-msgstr "Dewisiadau Eraill"
+msgid "Yugoslavian (latin)"
+msgstr "Iwgoslafaidd (lladin)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "When"
-msgstr "Pryd"
+msgid "Installing"
+msgstr "Gosod"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Where"
-msgstr "Lle"
+msgid "Launch userdrake"
+msgstr "Cychwyn userdrake"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "What"
-msgstr "Beth"
+msgid "Is this an install or an upgrade?"
+msgstr "Gosod neu ddiweddaru?"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr "Dileu ffeiliau tar y Disg Caled wedi cadw cyfrwng arall wrth gefn."
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "ISDN card"
+msgstr "Cerdyn ISDN mewnol"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Send mail report after each backup to:"
-msgstr "Anfonwch adroddiad e-bost wedi pob cadw wrth gefn i :"
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
+msgstr ""
+"Dewch i adnabod y gymuned Cod Agored a dewch yn aelod. Dysgwch, addysgwch a "
+"chynorthwywch eraill drwy ymuno yn y grwpiau trafod niferus sydd i'w cael yn "
+"ein tudalennau gwe \"Cymuned\""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
"\n"
-"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-"Gwnewch yn siwr bod daemon cron yn cael ei gynnwys yn eich gwasanaethau. \n"
+"Llongyfarchiadau, mae ffurfweddiad y rhwydwaith a'r Rhyngrwyd wedi gorffen\n"
+"Bydd y ffurfweddiad yn cael ei osod ar eich system\n"
"\n"
-"Sylwer bod yr holl gyfrwn \"gwe\" yn defnyddio'r ddisg caled."
#: ../../standalone/drakbackup:1
#, c-format
+msgid "\t-Hard drive.\n"
+msgstr "\t-Disg Caled.\n"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Please choose the\n"
-"media for backup."
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
+"\n"
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
-"Dewiswch y cyfrwng ar\n"
-"gyfer cadw wrth gefn..."
+"Mae'r cam hwn yn cael ei weithredu os oes hen raniad GNU/Linux wedi\n"
+"ei ganfod ar y cyfrifiadur.\n"
+"\n"
+"Bydd DrakX angen gwybod a ydych am osod o'r newydd neu uwchraddio\n"
+"system Mandrake Linux presennol.\n"
+"\n"
+" *\"Gosod\" Ar y cyfan, mae hwn yn tynnu'r hen system gyfan oddi ar eich\n"
+"cyfrifiadur. Os ydych am newid rhaniadau eich disgiau caled, neu newid y\n"
+"system ffeil, dylech ddewis hwn. Er hynny, yn ddibynnol ar eich trefn\n"
+"rhannu, mae modd atal peth o'ch data rhag cael ei ysgrifennu drosto gan\n"
+"y gosodiad newydd.\n"
+" *\"Uwchraddio\": mae'r dosbarth gosod hwn yn caniatĂĄu i chi ddiweddaru'r\n"
+"pecynnau sydd wedi eu gosod ar eich system Mandrake Linux. Bydd eich\n"
+"rhaniadau presenol a'ch data personol yn cael eu cadw. Bydd y rhan fwyaf\n"
+"o'r camau ffurfweddu ar gael fel gyda'r gosod arferol.\n"
+"\n"
+"Dylai defnyddio \"Uwchraddio\" weithio'n iawn ar systemau Mandrake Linux\n"
+"sy'n rhedeg systemau \"8.1\" neu'n ddiweddarach. Nid yw uwchraddio\n"
+"fersiynau cyn Mandrake Linux \"8.1\" yn cael ei gymeradwyo."
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
+#, c-format
+msgid "Printer on remote CUPS server"
+msgstr "Argraffydd ar wasanaethwr CUPS pell"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Dewiswch faint o amser\n"
-"fydd rhwng pob cadw wrth gefn"
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgstr "Methwyd Ăą thynnu argraffydd \"%s\" o Star Office/OpenOffice.org/GIMP."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Use daemon"
-msgstr "Defnyddiwch ddaemon"
+msgid "delete"
+msgstr "dileu"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "monthly"
-msgstr "bob mis"
+msgid "here if no."
+msgstr "yma os nad."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "weekly"
-msgstr "bob wythnos"
+msgid "DHCP host name"
+msgstr "Enw gwesteiwr DHCP"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "daily"
-msgstr "bob dydd"
+msgid "The maximum lease (in seconds)"
+msgstr "Les mewyaf (mewn eiliadau)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "hourly"
-msgstr "bob awr"
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "Dewiswch ba borth cyfresol mae eich llygoden wedi cysylltu iddi"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "HardDrive / NFS"
-msgstr "Disg Caled / NFS"
+msgid "Did it work properly?"
+msgstr "A weithiodd hwnnw'n iawn?"
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
#, c-format
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
+msgid "Poor"
+msgstr "Gwael"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please enter the directory to save to:"
-msgstr "Rhowch y cyfeiriadur i gadw iddo:"
+msgid "The DHCP start range"
+msgstr "Amrediad cychwyn DHCP"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr "Gwiriwch os ydych am dynnu eich tĂąp ar ĂŽl y cadw wrth gefn."
+msgid "Grenada"
+msgstr "Grenada"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr "Gwiriwch os ydych am ddileu eich tĂąp cyn y cadw wrth gefn."
+msgid "Unsafe"
+msgstr "Anniogel"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please check if you want to use the non-rewinding device."
+msgid ", %s sectors"
+msgstr ", %s sector"
+
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "No"
+msgstr "Na"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
msgstr ""
-"Gwiriwch os ydych am ddefnyddio'r dyfais nad yw'n mynd nĂŽl i'e ddechrau."
+"A yw eich argraffydd yn ddyfais amlbwrpas gan HP neu Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 gyda sganiwr, Sony IJP-V100), HP "
+"PhotoSmart neu HP LaserJet 2200?"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the device name to use for backup"
-msgstr "Rhowch enw dyfais i'w ddefnyddio ar gyfer cadw wrth gefn"
+msgid "Guadeloupe"
+msgstr "Guadeloupe"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Use tape to backup"
-msgstr "Defnyddiwch dĂąp i gadw wrth gefn"
+msgid "could not find any font.\n"
+msgstr "methu cnafod unrhyw ffontiau.\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "No CD device defined!"
-msgstr "Heb ddiffinio dyfais CD!"
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "Ydych chi eisiau i'r Backspace ddychwelyd Dileu yny consol?"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Rhowch enw dyfais eich Ysgrifennwr CD\n"
-"ex: 0,1,0"
+msgid "Vertical refresh rate"
+msgstr "Graddfa adfywio fertigol"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
#, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "Gwiriwch os ydych yn defnyddio dyfais DVDRAM"
+msgid "Entering step `%s'\n"
+msgstr "Cychwyn cam '%s\"\n"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "Gwiriwch os ydych yn defnyddio dyfais DVDR"
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " Erase Now "
-msgstr "Dileu Nawr"
+msgid "Removing %s ..."
+msgstr "Tynnu %s..."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "Gwiriwch os ydych am ddileu eich cyfrwng RW(Sesiwn 1af)"
+msgid "Niger"
+msgstr "Niger"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "Gwiriwch os ydych yn defnyddio cyfrwng CDRW"
+msgid "No printer"
+msgstr "Nid oes argraffydd"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Please check for multisession CD"
-msgstr "Gwiriwch os ydych yn defnyddio CD amlsesiwn"
+msgid "alert configuration"
+msgstr "ffurfweddiad rhybudd"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "Dewiswch maint eich gofod CD/DVD"
+msgid "NetWare Printer Options"
+msgstr "Dewisiadau Argraffydd NetWare"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
-msgstr ""
-"Dewiswch eich dyfais CD/DVD\n"
-"(Gwasgwch Enter i drosglwyddo'r gosodiadau i feysydd eraill.\n"
-"Nid yw'r maes hwn yn angenrheidiol, dim ond offeryn i lanw'r ffurflen.)"
+msgid "%s BootSplash (%s) preview"
+msgstr "%s Rhagolwg Croeso Cychwyn (%s)"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Use CD/DVDROM to backup"
-msgstr "Defnyddiwch yr CD/DVDROM i gadw wrth gefn"
+msgid "General"
+msgstr "Cyffredinol"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Need hostname, username and password!"
-msgstr "Angen enw gwesteiwr, enw defnyddiwr a chyfrinair"
+msgid "Printing system: "
+msgstr "System argraffu."
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Remember this password"
-msgstr "Cofiwch y cyfrinair"
+msgid "Add a user"
+msgstr "Ychwanegu defnyddiwr"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please enter your password"
-msgstr "Rhowch eich cyfrinair"
+msgid "Network configuration (%d adapters)"
+msgstr "Ffurfweddiad y rhwydwaith (%d addasydd)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "Please enter your login"
-msgstr "Rhowch eich mewngofnod"
+msgid "Mandatory package %s is missing"
+msgstr "Mae pecyn gorfodol %s ar goll"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
-msgstr ""
-"Rhowch y cyfeiriadur(neu fodiwl) i osod y cadw\n"
-"wrth gefn ar y gwesteiwr hwn."
+msgid "Philippines"
+msgstr "Philippines"
-#: ../../standalone/drakbackup:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
#, c-format
-msgid "Please enter the host name or IP."
-msgstr "Rhowch enw'r gwesteiwr neu'r IP"
+msgid "Ok"
+msgstr "Iawn"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
-msgstr ""
-"Allweddi eraill (nid drakbackup)\n"
-"yn eu lle yn barod"
+msgid "Print Queue Name"
+msgstr "Enw Rhes Argraffu"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "Ydych chi eisiau defnyddio aboot?"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "Belarusaidd"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-" Transfer \n"
-"Now"
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
msgstr ""
-"Trosglwyddo \n"
-"Nawr"
+"Mae PDQ yn cynnal argraffyddion lleol, LDP pell, a Socket/TCP, yn unig.\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Move files to the new partition"
+msgstr "Symud ffeiliau i'r rhaniad newydd"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
msgstr ""
-"Creu/Trosglwyddo\n"
-"allweddi wrth gefn ar gyfer SSH"
+"Ychwanegwch y gwasanaethwyr CUPS yr argraffwyr rydych am eu defnyddio. Bydd "
+"angen gwneud hyn dim ond os nad yw'r gwasanaethwyr yn darlledu eu gwybodaeth "
+"argraffu i'r rhwydwaith leol."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use Expect for SSH"
-msgstr "Defnyddiwch Expect ar gyfer SSH"
+msgid "Restore From Catalog"
+msgstr "Adfer o'r Catalog"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Net Method:"
-msgstr "Dull Rhwyd:"
+msgid "Pitcairn"
+msgstr "Pitcairn"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use network connection to backup"
-msgstr "Defnyddiwch cysylltiad rhwydwaith i gadw wrth gefn"
+msgid "IDE"
+msgstr "IDE"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Users"
-msgstr "Defnyddwyr"
+msgid "group :"
+msgstr "grwp:"
-#: ../../standalone/drakbackup:1
+#: ../../fs.pm:1
#, c-format
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
+msgid "mounting partition %s in directory %s failed"
+msgstr "methodd gosod rhaniad %s yng nghyfeiriadur %s"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr "Defnyddio Cadw wrth Gefn Cynyddol (peidio disodli hen gadw wrth gefn)"
+msgid "Lilo screen"
+msgstr "SgrĂźn Lilo"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid "Remove Selected"
-msgstr "Tynnu'r Dewis"
+msgid "LILO with graphical menu"
+msgstr "Lilo gyda dewislen graffigol"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Do not include the browser cache"
-msgstr "Peidio cynnwys storfa'r porwr"
+msgid "Estimating"
+msgstr "Amcangyfrif"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "Gwiriwch pob defnyddiwr rydych am eu cynnwys yn eich cadw wrth gefn."
+msgid "You can't unselect this package. It is already installed"
+msgstr "Does dim mod dad-ddewis y pecyn, mae wedi ei osod yn barod"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr ", argraffydd \"%s\" ar wasanaethwr SMB/Windows \"%s\""
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Go on anyway?"
+msgstr "Mynd yn ein blaen beth bynnag?"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Looking for available packages and rebuilding rpm database..."
msgstr ""
-"Gyda'e dewis hwn medrwch adfer unrhyw fersiwn\n"
-"o'ch cyfeiriadur /etc."
+"Chwilio am y pecynnau sydd ar gael ac yn ailadeiladu cronfa ddata rpm..."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Peidio cynnwys ffeiliau hanfodol (passwd, group, fstab)"
+msgid "Does not appear to be recordable media!"
+msgstr "Nid yw'n ymddangos fel cyfrwng cofnodi."
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Use incremental backup (do not replace old backups)"
-msgstr "Cadw wrth gefn cynyddol (peidio disodli hen ffeiliau wrth gefn)"
+msgid "Specify options"
+msgstr "Enwi dewisiadau"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Cadw wrth gefn ffeiliau System. ( cyfeiriadur /etc )"
+msgid "Vanuatu"
+msgstr "Vanuatu"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Mae'r dewisiadau hyn yn medru cadw wrth gefn ac adfer pob ffeil yn eich "
-"cyfeiriadur /etc.\n"
+msgid "Either the server name or the server's IP must be given!"
+msgstr "Rhaid rhoi un ai enw'r gwasanaethwr neu IP'r gwasanaethwr!"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
"\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
msgstr ""
+"Mae disg cychwyn yn darparu ffordd o gychwyn eich system Linux heb ddibynnu\n"
+"ar lwythwr cychwyn arferol. Mae hyn yn ddefnyddiol os ydych am osod SILO ar\n"
+"eich system, neu mae system weithredu arall wedi tynny SILO, neu nad yw "
+"SILO'n\n"
+"gweithio gyda eich ffurfweddiad caledwedd chi. Mae modd defnyddio disg "
+"cychwyn\n"
+" unigol hefyd gyda delwedd achub Mandrake, gan ei gwneud yn llawer haws "
+"adfer o\n"
+" fethiannau systemig sylweddol\n"
"\n"
-"Gwiriwch pob dewis sydd angen arnoch.\n"
+"Os hoffech greu disg cychwyn ar gyfer eich system, rhowch ddisg meddal yn y "
+"gyrrwr\n"
+" cyntaf a chliciwch \"Iawn\"."
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Dewiswch y ffeiliau neu gyfeiriaduron a chliciwch 'Ychwanegu'"
+msgid "You can't use an encrypted file system for mount point %s"
+msgstr "Nid oes modd defnyddio Cyfrol Resymegol LVM ar gyfer pwynt gosod %s"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "File Selection"
-msgstr "Dewis ffeiliau"
+msgid "Norfolk Island"
+msgstr "Norfolk Island"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Can't create catalog!"
-msgstr "Methu creu catalog!"
+msgid "Theme installation failed!"
+msgstr "Methodd gosod y thema!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid " Error while sending mail. \n"
-msgstr " Gwall wrth anfon e-bost. \n"
+msgid "Nothing to do"
+msgstr "Dim i'w wneud"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
-"\n"
-"Gweithgaredd Drakbackup drwy dĂąp:\n"
-"\n"
+msgid "Use for loopback"
+msgstr "Defnyddiwch ar gyfer cylchol"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
-"\n"
-"Gweithgaredd Drakbackup drwy CD:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
+msgstr "Offeryn Adross Gwall Mandrake"
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
-"\n"
-"Gweithgaredd Drakbackup drwy %s:\n"
-"\n"
+msgid "use pppoe"
+msgstr "defnyddiwch pppoe"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving files to the new partition"
+msgstr "Symud ffeiliau i'r rhaniad newydd"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s gyda cyflymu caledwedd 3D ARBROFOL"
+
+#: ../../help.pm:1 ../../interactive.pm:1
+#, c-format
+msgid "Advanced"
+msgstr "Uwch"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transfer"
+msgstr "Trosglwyddo"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak (Swedaidd)"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-" Anhawster cysylltiad FTP: Nid oedd yn bosibl anfon eich ffeiliau wrth gefn "
-"drwy FTP.\n"
+msgid "More Options"
+msgstr "Dewisiadau Eraill"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Afghanistan"
+msgstr "Afghanistan"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Delete Hard Drive tar files after backup to other media."
+msgstr "Dileu ffeiliau tar y Disg Caled wedi cadw cyfrwng arall wrth gefn."
+
+#: ../../services.pm:1
+#, c-format
msgid ""
-"file list sent by FTP: %s\n"
-" "
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
msgstr ""
-"rhestr ffeil yrrwyd gan FTP: %s\n"
-" "
+"Mae cron yn rhaglen safonnol yn UNIX sy'n rhedeg rhaglenni sydd wedi eu \n"
+"pennu gan y defnyddiwr ar adegau penodol. Mae vixie cron yn ychwanegu \n"
+"nifer o ychwanegiadau i'r UNIX cron sylfaenol, yn cynnwys gwell diogelwch \n"
+"a dewisiadau ffurfweddu mwy pwerus."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "No changes to backup!"
-msgstr "Dim newid i'r ffeil wrth gefn"
+msgid "Burundi"
+msgstr "Burundi"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Ffeiliau cadw wrth gefn y Disg Caled"
+msgid "Add Client -->"
+msgstr "Ychwanegu Cleient -->"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Backup Other files..."
-msgstr "Cadw wrth gefn ffeiliau eraill..."
+msgid "Read carefully!"
+msgstr "Darllenwch yn ofalus!"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "Cynnydd Disg Caled wrth Gefn..."
+msgid "RW"
+msgstr "RW"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Backup User files..."
-msgstr "Ffeiliau Defnyddiwr Cadw wrth Gefn..."
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
+msgstr "Rhowch eich safon teledu a gwlad"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Backup system files..."
-msgstr "Ffeiliau system wrth gefn"
+msgid "Port"
+msgstr "Porth"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "No tape in %s!"
-msgstr "Dim tĂąp yn %s!"
+msgid "No (experts only)"
+msgstr "Na (arbennigwyr yn unig)"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Permission problem accessing CD."
-msgstr "Anhawsterau caniatĂąd wrth gael mynediad i'r CD."
+msgid "No kernel selected!"
+msgstr "Heb ddeiwis cnewyllyn"
-#: ../../standalone/drakbackup:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "This may take a moment to erase the media."
-msgstr "Bydd yn cymryd ychydig o amser i ddileu'r cyfrwng."
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Gwasgwch Enter i gychwyn y system weithredu, 'g' i olygu'r"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Not erasable media!"
-msgstr "Nid cyfrwng dileuadwy!"
+msgid "Set-GID"
+msgstr "Set-GID"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr "Nid yw'n ymddangos fel cyfrwng cofnodi."
+msgid "The encryption keys do not match"
+msgstr "Nid yw'r allweddi amgryptio'n cydfynd"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No CDR/DVDR in drive!"
-msgstr "Dim CDR/DVDR yn y gyrrwr!"
+msgid "Right \"Windows\" key"
+msgstr "Bysell \"Windows\" de"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "WebDAV transfer failed!"
-msgstr "Method trosglwyddiad WebDaAV!"
+msgid "CDROM / DVDROM"
+msgstr "CDROM / DVDROM"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "WebDAV remote site already in sync!"
-msgstr "Mae safle pell WebDAV eisioes wedi cydamseru!"
+msgid "if set to yes, check empty password in /etc/shadow."
+msgstr "os wedi ei osod i iawn, gwirio cyfrinair gwag y /etc/shadow."
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Total progess"
-msgstr "Cyfanswm y cynnydd"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
+msgstr ""
+"Cyn parhau dylech ddarllen amodau'r drwydded yn ofalus. Mae'n ymwneud\n"
+"Ăą holl ddosbarthiad Mandrake Linux. Os ydych yn cytuno Ăą'r holl amodau,\n"
+"cliciwch blwch \"Derbyn\". \n"
+"Os nad, ddiffoddwch eich cyfrifiadur."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
+"Here is a list of the available printing options for the current printer:\n"
"\n"
-"ssh -i %s %s\\@%s\n"
+msgstr ""
+"Dyma restr o'r dewisiadau argraffu sydd ar gael ar gyfer yr argraffydd "
+"presennol:\n"
"\n"
-"without being prompted for a password."
+
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolutions"
+msgstr "Cydraniadau"
+
+#: ../../network/drakfirewall.pm:1
+#, c-format
+msgid ""
+"drakfirewall configurator\n"
+"\n"
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
msgstr ""
-"Roedd y trosglwyddiad yn llwyddiannus\n"
-"Efallai'r hoffechi wirio eich bod yn medru mewngofnodi i'r gwasanaether "
-"gyda:\n"
+"ffurfweddiadur drakfirewall\n"
"\n"
-"ssh -i %s %s\\@%s\n"
-"heb dderbyn cais am gyfrinair"
+"Mae hwn yn ffurfweddu mur gwarchod personol ar gyfer y peiriant \n"
+"Mandrake Linux hwn. Am fur gwarchod pwrpasol pwerus, \n"
+"edrychwch ddosbarthiad arbennigol MandrakeSecurity Firewall."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "%s not responding"
-msgstr "Nid yw %s yn ymateb"
+msgid ""
+"Please enter your username, password and domain name to access this host."
+msgstr ""
+"Rhowch eich enw defnyddiwr, cyfrinair ac enw parth i gael mynediad i'r "
+"gwesteiwr."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Can't find %s on %s"
-msgstr "Methu canfod %s ar %s"
+msgid "Remove selected host"
+msgstr "Tynnu'r gwesteiwr"
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr "Gwrthodwyd caniatĂąd wrth drosglwyddo %s i %s"
+msgid "Network configuration"
+msgstr "Ffurfweddiad y rhwydwaith"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Bad password on %s"
-msgstr "Cyfrinair gwallus yn %s"
+msgid "No sharing"
+msgstr "Peidio rhannu"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr "Dim cais am gyfrinair ar %s ym mhorth %s"
+msgid "Move selected rule down one level"
+msgstr "Symud y rheol i lawr un lefel"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "ERROR: Cannot spawn %s."
-msgstr "GWALL; methu taenu %s."
+msgid "TB"
+msgstr "TB"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr "Bydd hyn yn cymryd amser i gynhyrchu'r allweddi"
+msgid "Please check if you are using a DVDR device"
+msgstr "Gwiriwch os ydych yn defnyddio dyfais DVDR"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
-"%s exists, delete?\n"
-"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
+msgid "FATAL"
+msgstr "TERFYNNOL"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
"\n"
-" DrakBackup Report Details\n"
-"\n"
+"The network address is %s using a netmask of %s.\n"
"\n"
msgstr ""
-"\n"
-" Manylion Adroddiad DrakBackup \n"
-"\n"
+"Mae'r gwasanaethwr DHCP yn caniatĂĄu i gyfrifiaduron eraill gychwyn drwy "
+"ddefnyddio PXE ar ystod\n"
+"penodol o gyfeiriadau\n"
+"Y cyfeiriad rhwydwaith yw %s gan ddefnyddio netmask o %s\n"
"\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Delete"
+msgstr "Dileu"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"Allow/Forbid reboot by the console user."
msgstr ""
+"Ymredymiadau: (arg)\n"
"\n"
-" Adroddiad Daemon DrakBackup \n"
-"\n"
-"\n"
+"GaniatĂĄu/Gwrthod ailgychwyn cyfrifiadur gan ddefnyddiwr y consol."
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
msgstr ""
-"\n"
-" Adroddiad DrakBackup \n"
-"\n"
+"Hoffwn osod eich cyfrifiadur i gychwyn X yn awtomatig ar ĂŽl cychwyn\n"
+"Hoffech chi i XFree ddechrau wedi i chi ail-gychwyn?"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "INFO"
-msgstr "GWYBODAETH"
+msgid "Build the disk"
+msgstr "Adeiladu'r ddisg"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "FATAL"
-msgstr "TERFYNNOL"
+msgid "Disconnect %s"
+msgstr "Dadgysylltu %s"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "WARNING"
-msgstr "RHYBUDD"
+msgid "Status:"
+msgstr "Statws"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Cron not available yet as non-root"
-msgstr "Nid yw cron ar gael et ar gyfer di-wraidd"
+msgid "HTTP proxy"
+msgstr "Dirprwy HTTP"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Mae gosod %s wedi methu. Digwyddodd y gwall canlynol:"
+msgid "SSH Server"
+msgstr "Gwasanaethwr SSH"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No, I don't want autologin"
-msgstr "Na, tydw i ddim eisiau awto-mewngofnodi"
+msgid "\t-Network by rsync.\n"
+msgstr "\t-Rhwydwaith drwy rsync.\n"
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Iawn, rwyf eisiau awto-mewngofnodi gyda (defnyddiwr, bwrdd gwaith)"
+msgid "European protocol"
+msgstr "Protocol Ewropeaidd"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "Cychwyn yr amgylchedd graffigol wrth gychwyn eich system"
+msgid ", printer \"%s\" on server \"%s\""
+msgstr ", argraffydd \"%s\" ar wasanaethwr \"%s\""
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
#, c-format
-msgid "System mode"
-msgstr "Modd system"
+msgid "Error"
+msgstr "Gwall"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Bootsplash"
-msgstr "Croeso Cychwyn"
+msgid "allow \"su\""
+msgstr "caniatĂĄu \"su\""
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Lilo screen"
-msgstr "SgrĂźn Lilo"
+msgid "Australia"
+msgstr "Awstralia"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
-"\n"
-"Dewis thema ar\n"
-"gyfer lilo a bootsplash,\n"
-"mae modd eu dewis\n"
-"ar wahĂąn"
+msgid "please wait during ttmkfdir..."
+msgstr "arhoswch yn ystod ttmkfdir..."
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Themes"
-msgstr "ThemĂąu"
+msgid "Configure only card \"%s\"%s"
+msgstr "Ffurfweddu cerdyn \"%s\" %s yn unig"
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Splash selection"
-msgstr "Dewis sgrĂźn croeso"
+msgid "Level"
+msgstr "Lefel"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Rydych yn defnyddio %s fel rheolwr cychwyn.\n"
-"Cliciwch Ffurfweddu i gychwyn dewin gosod"
+msgid "Change the printing system"
+msgstr "Newidiwch y system argraffu"
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr "ThemĂąu LiLo a Croeso Cychwyn wedi eu gosod yn llwyddiannus"
+msgid ""
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
+msgstr ""
+"Mae eich system yn cynnal ffurfweddiad amlben.\n"
+"Beth hoffech ei wneud?"
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
#, c-format
-msgid "Theme installation failed!"
-msgstr "Methodd gosod y thema!"
+msgid "Configure services"
+msgstr "Ffurfweddu gwasanaethau"
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Notice"
-msgstr "Nodyn"
+msgid "Broadcast Address:"
+msgstr "Cyfeiriad Darlledu:"
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Relaunch 'lilo'"
-msgstr "Ail gychwyh 'lilo'"
+msgid "mount failed: "
+msgstr "maethodd y gosodiad"
-#: ../../standalone/drakboot:1
-#, c-format
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
msgstr ""
-"Methu ailgychwyn LiLo!\n"
-"Cychwyn \"lilo\" fel gwraidd ar y linell orchymyn i gwblhau gosod thema "
-"LiLo'n llawn."
+"Mae angen i'r cnewyllyn GNU/Linux gyflawni cyfrif cylch wrth gychwyn i "
+"gychwyn y cyfrif amser. Mae'r canlyniad yn cael ei gadw fel bogomips fel "
+"ffordd o \"feincnod\" y cpu."
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
-msgstr "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+msgid "Image"
+msgstr "Delwedd"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr "Methu cychwyn mkinitrd -f /boot/initrd-%s.img %s."
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"Wedi methu ag ychwanegu argraffydd \"%s\" i Star Office/OpenOffice.org/GIMP."
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
+#, c-format
+msgid "Remote Administration"
+msgstr "Gweinyddu Pell"
+
+#: ../../modules.pm:1
#, c-format
msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
msgstr ""
-"Methu ysgrifennu /etc/sysconfig/bootsplash.\\\\\n"
-"Heb ganfod y ffeil"
+"Nid oes cefnodgaeth PCIMA yn bodoli bellach ar gyfer cnewyllyn 2.2. "
+"Defnyddiwch cnewyllyn 2.4"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Write %s"
-msgstr "Ysgrifennu %s"
+msgid "Selected All"
+msgstr "Dewis Popeth"
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr "Methu ysgrifennu /etc/sysconfig/bootsplash."
+msgid "CUPS - Common Unix Printing System"
+msgstr "CUPS - Common Unix Printing System"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Lilo message not found"
-msgstr "Heb ganfod neges lilo"
+msgid "Webmin Service"
+msgstr "Gwasanaethau Webmin"
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Copy %s to %s"
-msgstr "CopĂŻo %s i %s"
+msgid "device"
+msgstr "dyfais"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Backup %s to %s.old"
-msgstr "Cadw %s i %s.old wrth gefn"
+msgid "All"
+msgstr "Popeth"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create new theme"
-msgstr "Creu thema newydd"
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "Pa system argraffu(sbwlydd) ydych chi am ei ddefnyddio?"
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"Dangos thema\n"
-"yn y consol"
+msgid "Greece"
+msgstr "Groeg"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Install themes"
-msgstr "Gosod themĂąu"
+msgid "An error occurred"
+msgstr "Digwyddodd gwall"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Lilo/grub mode"
-msgstr "Modd Lilo/grub"
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
+msgstr ""
+"Rhaid i'r pecyn gael ei uwchraddio\n"
+"Ydych chi'n siwr eich bod am ei ddad-ddewis?"
-#: ../../standalone/drakboot:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Yaboot mode"
-msgstr "Modd Yaboot"
+msgid "Tamil (Typewriter-layout)"
+msgstr "Tamil (cynllun teipiadur)"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
+msgid "manual"
+msgstr "llaw"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/File/_Quit"
-msgstr "/Ffeil/_Gadael"
+msgid "Printer manufacturer, model, driver"
+msgstr "Gwneuthurwr yr argraffydd, model, gyrrwr"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "/_File"
-msgstr "/_Ffeil"
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"Does dim cyfrwng neu mae wedi ei amddiffyn rhag ysgrifennu i'r dyfais %s.\n"
+"Rhowch un i mewn.."
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Style Configuration"
-msgstr "Ffurfweddu'r Math o Gychwyn"
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
+msgstr ""
+"Mae cyfarwyddiadur %s eisoes yn cynnwys peth data\n"
+"(%s)"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "No browser available! Please install one"
-msgstr "Dim porwr ar gael! Gosodawch un"
+msgid "Printer on NetWare server"
+msgstr "Argraffydd ar wasanaethwr NetWare"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "connecting to Bugzilla wizard ..."
-msgstr "cysylltwyd Ăą dewin Bugzilla..."
+msgid "Give the ram size in MB"
+msgstr "Rhowch maint RAM mewn MB"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Package not installed"
-msgstr "Pecyn heb ei osod"
+msgid "Real name"
+msgstr "Enw cywir"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Not installed"
-msgstr "Heb ei osod"
+msgid "done"
+msgstr "gorffen"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Standalone Tools"
-msgstr "Offer Unigol"
+msgid "Please uncheck or remove it on next time."
+msgstr "Dad-diciwch hwn neu ei dynnu'r tro nesaf."
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Report"
-msgstr "Adroddiad"
+msgid "Higher"
+msgstr "Uwch"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the partitions you want to format"
+msgstr "Dewiswch y rhaniadau rydych am eu fformatio"
+
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
+"Nid oes Cerdyn Teledu wedi ei ganfod ar eich peiriant. Gwiriwch fod Cerdyn "
+"Fideo/Teledu sy'n cael ei gynnal gan Linux wedi ei osod yn gywir.\n"
"\n"
"\n"
-"I gyflwyno adroddiad gwall, cliciwch ar y botwm adroddiad.\n"
-"Bydd hyn yn agor ffenestr porwr gwe yn https://drakbug.mandrakesoft.com\n"
-" lle welwch ffurflen i'w llenwi. Bydd yr wybodaeth rhowch arno'n cael ei\n"
-"drosglwyddo i'r gwasanaethwr\n"
+"Cewch ymweld Ăą'n cronfa ddata caledwedd yn:\n"
+"\n"
"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Release: "
-msgstr "Ryddhad"
+msgid "Can't find %s on %s"
+msgstr "Methu canfod %s ar %s"
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Kernel:"
-msgstr "Kernel:"
+msgid "Japanese 106 keys"
+msgstr "Siapaëaidd 106 bysell"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Package: "
-msgstr "Pecynnau"
+msgid "This will take a few minutes."
+msgstr "Bydd hyn yn cymryd rhai munudau"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Application:"
-msgstr "Rhaglen"
+msgid "Burkina Faso"
+msgstr "Burkina Faso"
-#: ../../standalone/drakbug:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Configuration Wizards"
-msgstr "Dewin Ffurfweddu"
+msgid "Use scanners on remote computers"
+msgstr "Defnyddio sganer ar gyfrifiaduron pell"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
+msgid "Delete selected rule"
+msgstr "Dileu'r rheol hwn"
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Windows Migration tool"
-msgstr "Offeryn Trosglwyddo o Windows"
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Mynediad at argraffydd ar wasanaethwr CUPS pell"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
+msgid "Insert a floppy in %s"
+msgstr "Rhowch ddisg meddal yn %s"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Software Manager"
-msgstr "Rheolwr Meddalwedd"
+msgid "Maldives"
+msgstr "Maldives"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Remote Control"
-msgstr "Rheoli o Bell"
+msgid "compact"
+msgstr "cryno"
-#: ../../standalone/drakbug:1
+#: ../../common.pm:1
#, c-format
-msgid "Msec"
-msgstr "Msec"
+msgid "1 minute"
+msgstr "1 munud"
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
+msgid "on channel %d id %d\n"
+msgstr "ar sianel %d id %d\n"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Mandrake Online"
-msgstr "Mandrake Online"
+msgid ", multi-function device"
+msgstr ",dyfais amlbwrpas"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
+msgid "Laos"
+msgstr "Laos"
-#: ../../standalone/drakbug:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Synchronization tool"
-msgstr "Offeryn Cydamseru"
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr "Nid oes rhaniadau FAT i newid eu maint (neu nad oes digon o le ar ĂŽl)"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "First Time Wizard"
-msgstr "Dewin Tro Cyntaf"
+msgid "Up"
+msgstr "I fyny"
-#: ../../standalone/drakbug:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mandrake Control Center"
-msgstr "Canolfan Rheoli Mandrake"
+msgid "Firewall"
+msgstr "Mur Cadarn"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Mandrake Bug Report Tool"
-msgstr "Offeryn Adross Gwall Mandrake"
+msgid "Area:"
+msgstr "Ardal:"
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Parameters"
-msgstr "Paramedrau"
+msgid "(E)IDE/ATA controllers"
+msgstr "Rheolyddion (E)IDE/ATA"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Configuration"
-msgstr "Ffurfweddu Cysylltiad Ăą'r Rhyngrwyd"
+msgid "Printer Server"
+msgstr "Gwasanaethwr Argraffydd"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "DHCP Client"
-msgstr "Cleient DHCP"
+msgid "Disconnection from the Internet complete."
+msgstr "Datgysylltwyd yn llwyr o'r Rhyngrwyd."
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ethernet Card"
-msgstr "Cerdyn Ethernet"
+msgid "Custom configuration"
+msgstr "Ffurfweddiad addasu"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Gateway"
-msgstr "Mynedfa"
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
+"Dangoswch lle bydd y delwedd gosod ar gael.\n"
+"\n"
+"Os nad oes gennych gyfeiriadur yn barod, copiwch gynnwys y CD neu'r DVD.\n"
+"\n"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connection type: "
-msgstr "Math o gyswllt:"
+msgid "Saint Pierre and Miquelon"
+msgstr "Saint Pierre a Miquelon"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Profile: "
-msgstr "Proffil:"
+msgid ""
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
+msgstr ""
+"\n"
+"Anawsterau Adfer Ffeiliau wrth gefn\n"
+"\n"
+"Yn ystod yr adfer bydd Drakbackup yn gwirio eich holl\n"
+"ffeiliau wrth gefn cyn eu hadfer.\n"
+"Cyn adfer, bydd Drakbackup yn tynnu'r cyfeiriadur\n"
+"gwreiddiol, a byddwch yn colli eich holl ddata. Mae'n\n"
+"bwysig eich bod yn ofalus a pheidio newid y ffeiliau\n"
+"data wrth gefn gyda llaw.\n"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Internet connection configuration"
-msgstr "Ffurfweddiad cysylltiad Ăą'r Rhyngrwyd"
+msgid "saving Bootsplash theme..."
+msgstr "cadw thema Croeso cychwyn..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Nid oes gennych cysylltiad Ăą'r Rhyngrwyd.\n"
-"Crëwch un drwy glicio ar 'Ffurfweddu'"
+msgid "Portugal"
+msgstr "Portiwgal"
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Nid yw'r rhag wyneb hwn wedi ei ffurfweddu eto.\n"
-"Cychwynnwch y dewin ffurfweddi yn y brif ffenestr."
+msgid "Do you have another one?"
+msgstr "Oes gennych un arall?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "activate now"
-msgstr "cychwyn nawr"
+msgid ", printing to %s"
+msgstr ", argraffu i %s"
-#: ../../standalone/drakconnect:1
+#: ../../network/network.pm:1
#, c-format
-msgid "deactivate now"
-msgstr "dad weithredu nawr"
+msgid "Assign host name from DHCP address"
+msgstr "Rhowch enw'r gwesteiwr o'r cyfeiriad DHCP"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DHCP client"
-msgstr "Cleient DHCP"
+msgid "Toggle to normal mode"
+msgstr "Arbennigwr > Cyffredinol"
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Started on boot"
-msgstr "Cychwyn y peiriant"
+msgid "Generic"
+msgstr "Generig"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Protocol"
-msgstr "Protocol Cychwyn"
+msgid "Cylinder %d to %d\n"
+msgstr "Silindr %d i silindr %d\n"
#: ../../standalone/drakconnect:1
#, c-format
-msgid "Adapter %s: %s"
-msgstr "Addasydd %s: %s"
+msgid "New profile..."
+msgstr "Proffil newydd..."
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LAN Configuration"
-msgstr "Ffurfweddiad Rhwydwaith Lleol (LAN)"
+msgid "Which disk do you want to move it to?"
+msgstr "Pa ddisg hoffech chi symud iddo?"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "LAN configuration"
-msgstr "Ffurfweddiad y Rhwydwaith Lleol"
+msgid "Display logo on Console"
+msgstr "Darddangos logo yn y Consol"
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Nid oes gennych unrhyw rhagwynebau wedi\n"
-"eu ffurfweddio. Ffurfweddwch nhw'n gyntaf\n"
-"drwy glicio ar 'Ffurfweddu'"
+msgid "Windows Domain"
+msgstr "Parth Windows"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Connect..."
-msgstr "Cysylltu..."
+msgid "Interface %s (on network %s)"
+msgstr "Rhyngwyneb %s (ar rwydwaith %s)"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Disconnect..."
-msgstr "Dadgysylltu..."
+msgid "INFO"
+msgstr "GWYBODAETH"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not connected"
-msgstr "Heb gysylltu"
+msgid "Wallis and Futuna"
+msgstr "Wallis a Futuna"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Connected"
-msgstr "Wedi cysylltu"
+msgid "Need to create /etc/dhcpd.conf first!"
+msgstr "Mae angen creu /etc/dhcpd.conf yn gyntaf"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Rhybudd, mae cysylltiad arall gyda'r rhyngrwyd wedi ei ganfod, efallai'n "
-"defnyddio eich rhwydwaith."
+msgid "Is FPU present"
+msgstr "Yw'r FPU yn bresennol"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Interface:"
-msgstr "Rhyngwyneb:"
+msgid "There are no scanners found which are available on your system.\n"
+msgstr "Does unrhyw sganiwr wedi ei ganfod ar gael ar eich cyfrifiadur.\n"
-#: ../../standalone/drakconnect:1
+#: ../../services.pm:1
#, c-format
-msgid "Gateway:"
-msgstr "Mynedfa:"
+msgid ""
+"No additional information\n"
+"about this service, sorry."
+msgstr "Dim gwybodaeth ychwanegol am y gwasanaeth hwn."
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Apply"
-msgstr "Gosod"
+msgid "Build Single NIC -->"
+msgstr "Adeiladau NIC unigol -->"
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Click here to launch the wizard ->"
-msgstr "Cliciwch yma i gychwyn y dewin ->"
+msgid "Is this correct?"
+msgstr "Ydi hyn yn gywir?"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Wizard..."
-msgstr "Dewin..."
+msgid "Marshall Islands"
+msgstr "Marshall Islands"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Status:"
-msgstr "Statws"
+msgid "Windows (FAT32)"
+msgstr "Windows (FAT32)"
-#: ../../standalone/drakconnect:1
+#: ../../steps.pm:1
#, c-format
-msgid "Type:"
-msgstr "Math: "
+msgid "Root password"
+msgstr "Cyfrinair gwraidd"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Internet access"
-msgstr "Mynediad i'r Rhyngrwyd"
+msgid "Build All Kernels -->"
+msgstr "Adeiladu pob cnewyllyn -->"
-#: ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Hostname: "
-msgstr "Enw gwesteiwr:"
+msgid "if set to yes, report unowned files."
+msgstr "os wedi ei osod i iawn, adrodd ar ffeiliau heb berchennog."
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Ffurfweddu'r Rhwydwaith Lleol..."
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"Nid oes gennych raniad cyfnewid\n"
+"\n"
+"Parhau beth bynnag?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "State"
-msgstr "Stad"
+msgid "Server IP missing!"
+msgstr "IP'r gwasanaethwr ar goll!"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Driver"
-msgstr "Gyrrwr"
+msgid "Suriname"
+msgstr "Suriname"
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "Protocol"
-msgstr "Protocol"
+msgid "Enable ACPI"
+msgstr "Galluogi ACPI"
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "Interface"
-msgstr "Rhyngwyneb"
+msgid "Graphical Environment"
+msgstr "Amgylchedd Graffig"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configure Internet Access..."
-msgstr "Ffurfweddu Mynediad i'r We..."
+msgid "Gibraltar"
+msgstr "Gibraltar"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Wait please"
-msgstr "Arhoswch"
+msgid "on Tape Device"
+msgstr "ar Ddyfais TĂąp"
-#: ../../standalone/drakconnect:1
+#: ../../network/modem.pm:1
#, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Enw'r proffil i'w greu ( mae'r proffil newydd yn cael ei greu fel copi o'r "
-"un cyfredol):"
+msgid "Do nothing"
+msgstr "Gwneud dim"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "New profile..."
-msgstr "Proffil newydd..."
+msgid "Delete Client"
+msgstr "Diddymu Cleient"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Profile to delete:"
-msgstr "Proffil i'w ddileu:"
+msgid "Filesystem type: "
+msgstr "Math o system ffeilio"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Del profile..."
-msgstr "Proffl dileu"
+msgid "Starting network..."
+msgstr "Cychwyn y rhwydwaith..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Ffurfweddiad y rhwydwaith (%d addasydd)"
+msgid "Vietnam"
+msgstr "Fietnam"
-#: ../../standalone/drakedm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
-"Mae'r Rheolwr Arddangos X11 yn caniatĂĄu i chi fewngofnodi\n"
-"i'ch system yn raffigol gyda'r X Windows System yn rhedeg. Mae'n cynnal\n"
-"rhedeg amryw o sesiynau X ar eich cyfrifiadur ar yr un pryd."
+msgid "/_Fields description"
+msgstr "/_Disgrifiad meysydd"
-#: ../../standalone/drakedm:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "Choosing a display manager"
-msgstr "Dewis rheowr arddangos"
+msgid "Optimize your security by using Mandrake Linux"
+msgstr "Y diogelwch mwyaf"
-#: ../../standalone/drakfloppy:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
-msgstr ""
-"Methu cau mkbootdisk yn iawn: \n"
-" %s \n"
-" %s"
+msgid "Help"
+msgstr "Cymorth"
-#: ../../standalone/drakfloppy:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Unable to fork: %s"
-msgstr "Methu fforchio: %s"
+msgid "Your personal phone number"
+msgstr "Eich rhif ffĂŽn personol"
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Which size do you want to keep for Windows on"
+msgstr "Pa faint o le ydych am ei gadw ar gyfer Windows ar"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
msgstr ""
-"Does dim cyfrwng neu mae wedi ei amddiffyn rhag ysgrifennu i'r dyfais %s.\n"
-"Rhowch un i mewn.."
+"Mae tudalen(nau) prawf wedi eu hanfon at yr argraffydd.\n"
+"Gall gymryd amser cyn i'r argraffydd gychwyn.\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "Gwnewch yn siwr fod y deunydd ar gael ar gyfer y ddyfais %s"
+msgid "Username required"
+msgstr "Mae angen enw defnyddiwr"
-#: ../../standalone/drakfloppy:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
+msgstr ""
+"Fel arfer mae DrakX yn dewis y bysellfwrdd cywir ar eich cyfer ( gan "
+"ddibynnu pa\n"
+" iaith rydych wedi ei ddewis) ac ni fyddwch yn gweld y cam hwn. Er hynny,\n"
+"efallai nad oes gennych fysellfwrdd sy'n cyfateb yn union i'ch iaith: e.e., "
+"os ydych\n"
+"yn Americanwr sy'n siarad Cymraeg, efallai eich bod am gadw eich "
+"bysellfwrdd\n"
+"Americanaidd. Neu os ydych yn siarad Cymraeg ac yn byw yn Hong Kong mae'r\n"
+" un sefyllfa'n codi. Yn y ddwy achos bydd angen i chi fynd yn ĂŽl i'r cam yma "
+"yn y\n"
+" gosodiad a dewis y bysellfwrdd perthnasol o'r rhestr.\n"
+"\n"
+"Cliciwch ar fotwm \"Rhagor\" i dderbyn y rhestr lawn o fysellfyrddau sy'n "
+"cael eu\n"
+" cynnal.\n"
+" \n"
+"Os fyddwch yn dewis cynllun bysellfwrdd wedi ei seilio ar wyddor an-"
+"Lladinaidd, \n"
+"bydd y deialog nesaf yn caniatĂĄu i chi ddewis rwymiad allwedd fydd yn newid "
+"y\n"
+"bysellfwrdd rhwng cynlluniau Lladin ac an-Lladin."
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build the disk"
-msgstr "Adeiladu'r ddisg"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "Dewisiadau Argraffydd SMB (Windows 9x/NT)"
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Output"
-msgstr "Allbwn"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
+"Ymredymiadau: (arg)\n"
+"\n"
+"GaniatĂĄu/Gwrthod negeseuon gwall IPv4 ffug."
#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Remove a module"
-msgstr "Tynnu modiwl"
+msgid "mkinitrd optional arguments"
+msgstr "ymresymiad dewisol mkinitrd"
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Add a module"
-msgstr "Ychwanegu modiwl"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
+"Syrffio'r We gyda Gwe-lywiwr Mozilla neu Konqueror, darllen eich e-bost "
+"gydag Evolution neu Kmail, creu eich dogfennau gydag OpenOffice.org"
-#: ../../standalone/drakfloppy:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "omit scsi modules"
-msgstr "peidio cynnwys modiwlau scsi"
+msgid "Protocol for the rest of the world"
+msgstr "Protocol ar gyfer gweddill y byd"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "if needed"
-msgstr "os oes angen"
+msgid "Print test pages"
+msgstr "Argraffu tudalennau prawf"
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "omit raid modules"
-msgstr "peidio cynnwys modiwlau raid"
+msgid "64 MB or more"
+msgstr "16 MB neu fwy"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "force"
-msgstr "grym"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
+"Dewiswch y tudalennau prawf rydych am eu hargraffu\n"
+"Sylwer: gall y dudalen brawf llun camera gymryd cryn dipyn o amser cyn cael "
+"ei argraffu ac ar argraffydd laser heb lawer o gof mae'n bosibl na ddaw o "
+"gwbl. Yn y rhan fwyaf o achosion, mae'r prawf tudalen safonol yn ddigonol."
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "mkinitrd optional arguments"
-msgstr "ymresymiad dewisol mkinitrd"
+msgid "Please select the device where your %s is attached"
+msgstr "Dewiswch y ddyfais lle mae %s wedi ei gysylltu"
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Expert Area"
-msgstr "Maes Uwch"
+msgid "Not formatted\n"
+msgstr "Heb ei fformatio\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "kernel version"
-msgstr "fersiwn cnewyllyn"
+msgid "Periodic Checks"
+msgstr "Gwirydd Cyfnodol"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "default"
-msgstr "rhagosodedig"
+msgid "PXE Server Configuration"
+msgstr "Ffurfweddiad Gwasanaethwr PXE"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "General"
-msgstr "Cyffredinol"
+msgid "Backup the system files before:"
+msgstr "Cadw'r ffeiliau system wrth gefn cyn:"
-#: ../../standalone/drakfloppy:1
+#: ../../security/level.pm:1
#, c-format
-msgid "boot disk creation"
-msgstr "creu disg cychwyn"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"Dyma'r safon sy'n cael ei argymell ar gyfer diogelwch cyfrifiadur fydd yn "
+"cael ei gysylltu Ăą'r Rhyngrwyd fel cleient."
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "First floppy drive"
+msgstr "Gyrrwr disg meddal cyntaf"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Size"
-msgstr "Maint"
+msgid "/File/_Quit"
+msgstr "/Ffeil/_Gadael"
-#: ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Module name"
-msgstr "Enw'r modiwl"
+msgid "Dvorak"
+msgstr "Dvorak"
-#: ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Post Uninstall"
-msgstr "Wedi'r dad osod"
+msgid "Choose the new size"
+msgstr "Dewiswch y maint newydd"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Remove fonts on your system"
-msgstr "Tynnu ffontiau oddi ar eich system!"
+msgid "Media class"
+msgstr "Dosbarth y cyfrwng"
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Initial tests"
-msgstr "Prawf Init"
+msgid "The %s is not known by this version of Scannerdrake."
+msgstr "Nid yw %s yn hysbys gan y fersiwn hwn o Scannerdrake."
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Post Install"
-msgstr "Wedi'r Gosod"
+msgid "Faroe Islands"
+msgstr "Ynysoedd Faroe"
#: ../../standalone/drakfont:1
#, c-format
-msgid "Install & convert Fonts"
-msgstr "Gosod a throsi ffontiau"
+msgid "Restart XFS"
+msgstr "Ail gychwyn XFS"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Copy fonts on your system"
-msgstr "CopĂŻo'r ffontiau ar eich system!"
+msgid "Add host/network"
+msgstr "Ychwanegu gwesteiwr/rhwydwaith"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Remove List"
-msgstr "Rhestr Tynnu"
+msgid ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
+msgstr ""
+"os wedi ei osod i iawn, gwirio am gyfrinair gwag, neu un arall ddyllai fod "
+"yn /etc/shadow neu eraill gyda enw 0."
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Selected All"
-msgstr "Dewis Popeth"
+msgid "Please enter the directory to save to:"
+msgstr "Rhowch y cyfeiriadur i gadw iddo:"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Unselected All"
-msgstr "Dad ddewis Popeth"
+msgid "Model name"
+msgstr "Enw'r model"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "here if no."
-msgstr "yma os nad."
+msgid "Albania"
+msgstr "Albania"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "click here if you are sure."
-msgstr "cliciwch yma os ydych yn siwr."
+msgid "No CDR/DVDR in drive!"
+msgstr "Dim CDR/DVDR yn y gyrrwr!"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Install List"
-msgstr "Gosod Rhestr"
+msgid "British Indian Ocean Territory"
+msgstr "British Indian Ocean Territory"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Dewiswch ffeil neu gyfeiriadur y ffont a chlicio 'Ychwanegu'"
+msgid "Normal Mode"
+msgstr "Modd Arferol"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
+"Please be sure that the cron daemon is included in your services. \n"
"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-"Cyn gosod unrhyw ffontiau, gwnewch yn siwr bod gennych yr hawl i'w defnyddio "
-"a'u gosod ar eich system.\n"
+"Gwnewch yn siwr bod daemon cron yn cael ei gynnwys yn eich gwasanaethau. \n"
"\n"
-"- Medrwch osod y ffontiau yn y dull arferol. Mewn achosion prin, gall "
-"ffontiau ffug rewi eich Gwasanaethwr X."
+"Sylwer bod yr holl gyfrwn \"gwe\" yn defnyddio'r ddisg caled."
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generic Printers"
-msgstr "Argraffyddion Generig"
+msgid "Printer connection type"
+msgstr "Math o gyswllt argraffydd"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Abiword"
-msgstr "Abiword"
+msgid "No network adapter on your system!"
+msgstr "Nid oes addasydd rhwydwaith ar eich system!"
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
+msgid "Network %s"
+msgstr "Rhwydwaith %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
+msgid "Malayalam"
+msgstr "Malayalam"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Dewiswch y rhaglenni fydd yn cynnal ffontiau:"
+msgid "Option %s out of range!"
+msgstr "Dewis %s allan o amrediad!"
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
-"\n"
-" Hawlfraint (C) 2001-2002 MandrakeSoft \n"
-"\tDUPONT Sebastien sdupont(fersiwn wreiddiol)\n"
-" CHAUMETTE Damien<dchaumette\\@mandrakesoft.com\n"
-"\n"
-"Mae'r rhaglen hon yn feddalwedd rhydd; medrwch ei ailddosbarthu\n"
-"a/neu ei newid o dan amodau Trwydded Gyhoeddus Gyffredinol GNU\n"
-"fel sydd wedi ei gyhoeddi gan y Free Software Foundation; un ai fersiwn\n"
-"2 neu (yn ĂŽl eich dewis) unrhyw fersiwn diweddarach.\n"
-"\n"
-" Mae'r rhaglen yn cael ei ddosbarthu yn y gobaith y bydd yn ddefnyddiol,\n"
-" ond HEB UNRHYW WARANT; heb hyd yn oed awgrym o warant o\n"
-" FASNACHEIDDRWYDD nag ADDASRWYDD AR GYFER PWRPAS\n"
-" PENODOL. Gweler Trwydded Gyhoeddus Gyffredinol GNU am fwy o\n"
-" wybodaeth.\n"
-"\n"
-" Dylech fod wedi derbyn copi o Drwydded Gyhoeddus Gyffredinol GNU\n"
-" gyda'r rhaglen; os nad, ysgrifennwch at:\n"
-" Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,\n"
-"MA 02111-1307, USA\n"
-" Diolch:\n"
-" - pfm2afm: \n"
-"\t gan Ken Borgendale:\n"
-"\t Trosi ffeil .pfm Windows i .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t bganJames Macnicol: \n"
-"\t type1inst cynhyrchu files fonts.dir fonts.scale a Fontmap.\n"
-" - ttf2pt1: \n"
-"\t gan Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Trosi ffeiliau ffont i ffontiau afm pfb\n"
-"\n"
-"\n"
+msgid "Connect %s"
+msgstr "Cysylltu %s"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "About"
-msgstr "Ynghylch"
+msgid "Restarting CUPS..."
+msgstr "Ail gychwynCUPS"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Font List"
-msgstr "Rhestr Ffontiau"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "Argraffu/Sganio/Cardiau Llun ar \"%s\""
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Advanced Options"
-msgstr "Dewisiadau Uwch"
+msgid "Duplicate mount point %s"
+msgstr "Pwynt gosod dyblyg %s"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Uninstall Fonts"
-msgstr "Dad osod Ffontiau"
+msgid "if set to yes, run chkrootkit checks."
+msgstr "os wedi ei osod i iawn, gwirio gyda chkrootkit."
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Get Windows Fonts"
-msgstr "Estyn Ffontiau Windows"
+msgid "Connection Configuration"
+msgstr "Ffurfweddiad y Cysylltiad"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Import Fonts"
-msgstr "Mewnforio Ffontiau"
+msgid "Unknown|Generic"
+msgstr "Anhysbys|Generig"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
+msgstr ""
+"Ar yr adeg pan fyddwch yn gosod Mandrake Linux, mae'n debygol y bydd\n"
+"rhai pecynnau wedi eu diweddaru ers y rhyddhad cychwynnol. Bydd rhai \n"
+"gwallau wedi eu cywiro a materion diogelwch wedi eu datrys. I ganiatĂĄu\n"
+"i chi fanteisio ar hyn mae cynnig i chi eu llwytho i lawr o'r rhyngrwyd.\n"
+"Dewiswch \"Iawn\" os oes gennych gyswllt gweithredol Ăą'r rhyngrwyd,\n"
+"neu \"Na\"os ydych am osod pecynnau mwy diweddar rhywbryd eto.\n"
+"\n"
+"Bydd dewis \"Iawn\" yn dangos rhestr o leoedd o le mae modd derbyn\n"
+"diweddariadau. Dewiswch yr un agosaf atoch. Yna, bydd coeden dewis\n"
+"pecynnau yn ymddangos: Wedi i chi benderfynu ar eich dewis, cliciwch\n"
+"\"Gosod\" i estyn a gosod y pecynnau hynny neu \"Diddymu\" i beidio."
+
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "done"
-msgstr "gorffen"
+msgid "Quit"
+msgstr "Gadael"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "xfs restart"
-msgstr "ail gychwyn xfs"
+msgid "Myanmar"
+msgstr "Myanmar"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Suppress Fonts Files"
-msgstr "Llethu ffeiliau Ffontiau"
+msgid "Auto allocate"
+msgstr "Awto ddynodi"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restart XFS"
-msgstr "Ail gychwyn XFS"
+msgid "Check bad blocks?"
+msgstr "Gwirio blociau gwallus?"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Suppress Temporary Files"
-msgstr "Llethu Ffeiliau Dros dro"
+msgid "Other MultiMedia devices"
+msgstr "Dyfeisiau AmlGyfrwng eraill"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "type1inst building"
-msgstr "adeiladu math 1inst"
+msgid "No remote machines"
+msgstr "Dim cyfrifiaduron pell"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "pfm fonts conversion"
-msgstr "trosi ffontiau pfm"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"Croeso i'r Dewin Gosod Argraffydd\n"
+"\n"
+"Bydd y dewin yn eich cynorthwyo i osod argraffydd(ion) sydd wedi eu cysylltu "
+"Ăą'r cyfrifiadur hwn,\n"
+"\n"
+"Os oes gennych argraffydd(ion) yn gysylltiedig Ăą'r peiriant, cysylltwch nhw "
+"Ăą'r peiriant a'u troi nhw mlaen fel bod modd awtoganfod.\n"
+"\n"
+"Cliciwch \"Nesaf\" pan ydych yn barod, a \"Diddymu\" os nad ydych am osod "
+"eich argraffydd(ion) ar hyn o bryd."
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "ttf fonts conversion"
-msgstr "trosi ffontiau ttf "
+msgid "Authentication NIS"
+msgstr "Dilysu LDAP"
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Ghostscript referencing"
-msgstr "cyfeirio Ghostscript"
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr ""
+"Dewis Nid yw 'cyfyngu dewisiadau llinell orchymyn' o werth heb gyfrinair"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Fonts conversion"
-msgstr "Trosiad ffontiau"
+msgid "Internet Connection Sharing currently enabled"
+msgstr "Mae Rhannu Cysylltiad Ăą'r Rhyngrwyd wedi ei alluogi"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "True Type install done"
-msgstr "Wedi gosod True Type"
+msgid "Card IO_0"
+msgstr "IO_O y cerdyn"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "arhoswch yn ystod ttmkfdir..."
+msgid "United Arab Emirates"
+msgstr "United Arab Emirates"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "True Type fonts installation"
-msgstr "Gosod ffontiau True Type"
+msgid "Card IO_1"
+msgstr "IO_1 y cerdyn"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Fonts copy"
-msgstr "CopĂŻo ffontiau"
+msgid "Thailand"
+msgstr "Gwlad Thail"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Search for fonts in installed list"
-msgstr "Chwilio am ffontiau yn y rhestr gosod"
+msgid "Routers:"
+msgstr "Llwybryddion:"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "could not find any font.\n"
-msgstr "methu cnafod unrhyw ffontiau.\n"
+msgid "Kazakhstan"
+msgstr "Kazakhstan"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Reselect correct fonts"
-msgstr "Ailddewis y ffontiau cywir"
+msgid "Display all available remote CUPS printers"
+msgstr "Arddangos pob argraffydd CUPS pell sydd ar gael"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_newt.pm:1
#, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr "methu canfod unrhyw ffont yn eich rhaniad gosodedig"
+msgid "Mandrake Linux Installation %s"
+msgstr "Gosodiad %s Mandraks Linux"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "no fonts found"
-msgstr "heb ganfod ffontiau"
+msgid "Thai keyboard"
+msgstr "Bysellfwrdd Thai"
-#: ../../standalone/drakfont:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "parse all fonts"
-msgstr "pob ffont"
+msgid "Dialup options"
+msgstr "Dewisiadau cyswllt ffĂŽn"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unselect fonts installed"
-msgstr "Tynnu ffontiau wedi eu gosod"
+msgid "Bouvet Island"
+msgstr "Bouvet Island"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Search installed fonts"
-msgstr "Chwilio am ffontiau wedi eu gosod"
+msgid "If no port is given, 631 will be taken as default."
+msgstr ""
+"Os nad oes porth yn cael ei gynnig, bydd 631 yn cael ei gymryd fel y "
+"rhagosodedig."
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
+"Change your Cd-Rom!\n"
"\n"
-"Click on Configure to launch the setup wizard."
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
-"Croeso i'r Gwasanaeth Rhannu Cysylltiad Ăą'r Rhyngrwyd\n"
-"\n"
-"%s\n"
+"Newidiwch eich CD-ROM\n"
"\n"
-"Cliciwch Ffurfweddu i gychwyn y dewin gosod."
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "Ffurfweddiad Rhannu Cysylltiad Ăą'r Rhyngrwyd"
+"Rhowch yr CD-ROM sydd wedi ei labeli \"%s\" yn eich gyrrwr a chlicio Iawn\n"
+"Os nad yw gennych, cliciwch Dileu i osgoi gosod o'r CD-ROM hwn."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Nid oes Rhannu Cysylltiad Ăą'r Rhyngrwyd wedi eu ffurfweddu o'r blaen."
+msgid "Polish"
+msgstr "Pwylaidd"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Mae'r gosodiad wedi ei gyflawnu, mae wedi ei allluogi ar hyn o bryd."
+msgid "Mandrake Online"
+msgstr "Mandrake Online"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Mae'r gosodiad wedi ei gyflawnu, mae wedi ei anallluogi ar hyn o bryd."
+msgid "\t-Network by webdav.\n"
+msgstr "\t-Rhwydwaith drwy webday.\n"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
msgstr ""
-"Mae popeth wedi ei ffurfweddu\n"
-"Gallwch rannu cysylltiad Ăą'r Rhyngrwyd gyda chyfrifiaduron eraill ar eich "
-"Rhwydwaith Lleol gan ddefnyddio ffurfweddiad rhwydwaith awtomatig (DHCP)."
+"Nid oes addasydd rhwydwaith ethernet wedi ei ganfod ar eich system. Rhedwch "
+"yr offeryn ffurfweddu caledwedd."
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Problems installing package %s"
-msgstr "Anhawster wrth osod pecyn %s"
+msgid "Netmask"
+msgstr "Netmask"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Ffurfweddio sgriptiau, gosod meddalwedd, cychwyn gwasanaethwyr..."
+msgid "No hard drives found"
+msgstr "Heb ganfod gyrwyr caled"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring..."
-msgstr "Ffurfweddu..."
+msgid "Logitech CC Series"
+msgstr "Logitech CC Series"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Canfuwyd gwrthdaro posib yng nghyfeiriad LAN ffurfweddiad presennol %s!\n"
+msgid "2 buttons"
+msgstr "2 fotwm"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Nid yw'r Rhwydwaith Leol yn terfynnu gyda '.0', tynnu allan."
+msgid "What kind is your ISDN connection?"
+msgstr "Pa fath o gysylltiad IDSN?"
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "Ail ffurfweddi rhag wyneb a gwasanaethwr DHCP"
+msgid "Label"
+msgstr "Label"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr "Les mewyaf (mewn eiliadau)"
+msgid "Save on floppy"
+msgstr "Cadw ar ddisg meddal"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The default lease (in seconds)"
-msgstr "Les rhagosodedig (mewn eiliadau)"
+msgid "Printer auto-detection"
+msgstr "Awto ganfod argraffydd"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The DHCP end range"
-msgstr "Amrediad terfyn DHCP"
+msgid "Which of the following is your ISDN card?"
+msgstr "Pa un o'r canlynol yw eich cerdyn IDSN?"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
-msgid "The DHCP start range"
-msgstr "Amrediad cychwyn DHCP"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
+msgstr ""
+"Mae NFS yn brotocol poblogaidd ar gyfer rhannu ffeiliau ar draws "
+"rhwydweithiau TCP/IP.\n"
+"Mae'r gwasanaeth yn darparu ffwythiannaeth gwasanaethwr NFS, sy;n cael ei "
+"ffurfweddu\n"
+"drwy'r ffeil /etc/exports."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The internal domain name"
-msgstr "Enw'r parth mewnol"
+msgid "Msec"
+msgstr "Msec"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "The DNS Server IP"
-msgstr "Y Gwasanaethwr DHCP IP"
+msgid ""
+"=> Notice, a label changed:\n"
+"%s"
+msgstr ""
+"=>Hysbysiad, mae label wedi newid:\n"
+"%s"
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "Gwasanaethwr DHCP IP (Hwn)"
+msgid "Number of capture buffers:"
+msgstr "Nifer o fyffers cipio:"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
+msgid "Your choice? (0/1, default `%s') "
+msgstr "Eich dewis? (0/1, rhagosodedig %s)"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"DHCP Server Configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
"\n"
-msgstr ""
-"Ffurfweddiad Gwasanaethwr DHCP\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
"\n"
-"Mae modd dewis dewisiadau gwahanol ar gyfer ffurfweddiad DHCP.\n"
-"Os nad ydych yn gwybod ystyr y dewis, gadewch lonydd iddo.\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
"\n"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Local Network adress"
-msgstr "Cyfeiriad y Rhwydwaith Lleol "
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
msgstr ""
-"Medraf gadw eich ffurfweddiad cyfredol a chymryd eich bod eisoes wedi gosod "
-"gwasanaethwr DHCP. Os felly, dilyswch fy mod wedi darllen y rhwydwaith "
-"dosbarth C rydych yn ei ddefnyddio fel eich rhwydwaith lleol, yn gywir. Ni "
-"fyddaf yn ei newid na chyffwrdd Ăą ffurfweddiad eich gwasanaethwr DHCP.\n"
+"Rhaid i bob rhaniad sydd newydd eu henwi gael eu fformatio ar gyfer eu\n"
+"defnyddio (mae fformatio'n golygu creu system ffeilio)\n"
"\n"
-"Y cofnod DNS rhagosodedig yw'r enw gwasanaethwr storio sydd wedi ei "
-"ffurfweddu yn y mur cadarn. Mae modd i chi ei newid am eich IP DNS ISP, e."
-"e. \n"
+"Efallai y byddwch eisiau ailfformatio rhai rhaniadau presennol i ddileu "
+"data\n"
+"sydd arnynt. Os ydych am wneud hynny, dewiswch y rhaniadau hynny hefyd.\n"
"\n"
-"Neu, medraf ail ffurfweddu eich rhag wyneb ac (ail)ffurfweddi gwasanaethwr "
-"DHCP ar eich cyfer.\n"
+"Sylwch nad oes angen ailfformatio'r holl raniadau sy'n bodoli eisoes. "
+"Rhaid \n"
+"ailfformatio'r rhaniadau sy'n cynnwys y system weithredu [megis \"/\",\"usr"
+"\"\n"
+"neu \"/var\") ond nid oes rhaid i chi ail fformatio rhaniadau sy'n cynnwys\n"
+"data rydych am ei gadw (e.e. \"/home\").\n"
+"\n"
+"Byddwch ofalus wrth ddewis rhaniadau. Ar ĂŽl fformatio bydd yr holl ddata ar\n"
+"y rhaniadau'n cael eu dileu ac ni fydd modd ei adfer.\n"
+"\n"
+"Cliciwch \"Nesaf ->\" pan ydych yn barod i fformatio rhaniadau.\n"
+"\n"
+"Cliciwch \"<- Cynt\" os ydych am ddewis rhaniad arall ar gyfer eich "
+"gosodiad\n"
+"Mandrake Linux newydd\n"
+"\n"
+"Cliciwch \"Uwch\" os ydych am ddewis rhaniadau i'w gwirio am flociau\n"
+"gwallus ar y ddisg."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "French"
+msgstr "Ffrengig"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTY)"
+msgstr "Tsiec (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
+#, c-format
+msgid "Hardware probing in progress"
+msgstr "Canfod caledwedd ar waith"
#: ../../standalone/drakgw:1
#, c-format
+msgid "Net Device"
+msgstr "Dyfais Rhyngrwyd"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Summary"
+msgstr "Crynodeb"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
-"Ffurfweddiad presennol '%s':\n"
-"\n"
-"Rhwydwaith: %s\n"
-"Cyfeiriad IP: %s\n"
-"Priodweddau IP: %s\n"
-"Gyrrwr: %s"
+" (Pyrth paralel: /dev/lp0, /dev/lp1, ..., yn cyfateb i LPT1:, LPT2:, ..., "
+"argraffydd USB cyntaf: /dev/usb/lp0, ail argraffydd USB : /dev/usb/lp1, ...)."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Current interface configuration"
-msgstr "Ffurfweddiad rhyngwyneb cyfredol"
+msgid "Next"
+msgstr "Nesaf"
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Show current interface configuration"
-msgstr "Dangoswch y ffurfweddiad rhag wyneb cyfredol"
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "Nid oes modd gosod y cychwynnydd ar raniad %s\n"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "No (experts only)"
-msgstr "Na (arbennigwyr yn unig)"
+msgid "CHAP"
+msgstr "CHAP"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Automatic reconfiguration"
-msgstr "Ail ffurfweddiad awtomatig"
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp/zeroconf)"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
"\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
"\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
-"Rhybudd, mae'r addaswr rhwydwaith (%s) wedi ei ffurfweddu eisoes.\n"
"\n"
-"Ydych chi eisiau ail ffurfweddiad awtomatig?\n"
+"Croeso\n"
"\n"
-"Medrwch ei wneud gyda llaw ond mae'n rhaid i chi wybod beth ydych yn ei "
-"wneud."
+"Mae paramedrau'r awto osod i'w cael yn yr adran ar y chwith"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface already configured"
-msgstr "Mae rhag wyneb y rhwydwaith wedi ei ffurfwedu eisoes"
+msgid "Puerto Rico"
+msgstr "Puerto Rico"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""
-"Dewiswch ba addasyddion rhwydwaith fydd yn cael eu cysylltu Ăą'ch Rhwydwaith "
-"Lleol."
+"i weithio'n iawn mae angen 'ImageMagick' i gwblhau'r ffurfweddiad.\n"
+"Cliciwch \"Iawn\" i osod 'Image Magick' neu \"Diddymu\" i orffen"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "Lithuenaidd \"rhes rhif\" QWERTY"
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
-"%s\n"
"\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
msgstr ""
-"Dim ond un addasydd rhwydwaith wedi ei ffurfweddu sydd ar eich system\n"
+"Bydd y pecynnau canlynol yn cael eu tynnu ganiatĂĄu diweddaru eich system: %"
+"s\n"
"\n"
-"%s\n"
"\n"
-"Rwyf ar fin gosod eich Rhwydwaith Lleol gyda'r addasydd hwnnw.."
+"Ydych chi am dynnu'r pecynnau hyn?\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface"
-msgstr "Rhyngwyneb rhwydwaith"
+msgid "Anguilla"
+msgstr "Anguilla"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Nid oes addasydd rhwydwaith ethernet wedi ei ganfod ar eich system. Rhedwch "
-"yr offeryn ffurfweddu caledwedd."
+msgid "NIS Domain"
+msgstr "Parth NIS"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No network adapter on your system!"
-msgstr "Nid oes addasydd rhwydwaith ar eich system!"
+msgid ""
+"\n"
+"- User Files:\n"
+msgstr ""
+"\n"
+"- Ffeiliau Defnyddiwr:\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s"
-msgstr "Rhagwyneb %s"
+msgid "Antarctica"
+msgstr "Antarctica"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Rhyngwyneb %s (gan ddefnyddio modiwl %s)"
+msgid "Mount options"
+msgstr "Dewisiadau gosod"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Net Device"
-msgstr "Dyfais Rhyngrwyd"
+msgid "Jamaica"
+msgstr "Jamaica"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
-"Rhowch enw'r rhyngwyneb sy'n cysylltu Ăą'r rhyngrwyd.\n"
-"\n"
-"Enghreifftiau:\n"
-"\t\tppp+ cysylltiad modem neu DSL, \n"
-"\t\teth0, neu eth1 fam gysylltiad cebl, \n"
-"\t\tippp+ am gysylltiad idsn.\n"
+"Dynodi dyfeisiau bras i ddyfeisiau bloc (megis dig caled rhaniadau), \n"
+"ar gyfer defnydd rhaglenni megis Oracle neu chwaraewyr DVD."
-#: ../../standalone/drakgw:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
msgstr ""
-"Rydych ar fin ffurfweddu eich cyfrifiadur i rannu ei gysylltiad Rhyngrwyd\n"
-"Gyda'r nodwedd hwn bydd cyfrifiaduron eraill ar eich rhwydwaith lleol yn "
-"medru rhannu cyswllt rhyngrwyd y cyfrifiadur hwn.\n"
-"\n"
-"Gwnewch yn siwr eich bod wedi ffurfweddu eich mynediad Rhwydwaith/Rhyngrwyd "
-"gyda drakconnect cyn mynd ymhellach.\n"
+"Ymresymiadau: (arg, alert=1)\n"
"\n"
-"Sylwer: bydd angen Addasydd Rhwydwaith un-pwrpas i greu Rhwydwaith Lleol "
-"(LAN)."
+"Galluogi/Analluogi amddiffyn spwffio datrys enw. Os yw\n"
+"\\fIalert\\fP yn wir, adrodd i syslog."
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Rhannu Cysylltiad Ăą'r Rhyngrwyd"
+msgid "Please wait, preparing installation..."
+msgstr "Arhoswch, paratoi i osod"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Mae Rhannu Cysylltiad Ăą'r Rhyngrwyd wedi ei alluogi."
+msgid "Czech (QWERTZ)"
+msgstr "Tsiec (QWERTY)"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Enabling servers..."
-msgstr "Galluogi gwasanaethwyr..."
+msgid "Track network card id (useful for laptops)"
+msgstr "Dilynnwch cyfernod cerdyn rhwydwaith (defnyddiol ar gyfer gliniadur)"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "dismiss"
-msgstr "gwrthod"
+msgid "The port number should be an integer!"
+msgstr "Dylai rhif porth fod yn gyfanrif!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "reconfigure"
-msgstr "ailffurfweddu"
+msgid "You must choose an image file first!"
+msgstr "Rhaid dewis ffeil delwedd yn gyntaf!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "enable"
-msgstr "galluogi"
+msgid "Restore from Hard Disk."
+msgstr "Adfer o'r Ddisg Caled."
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Mae gosodiad rhannu cysylltiad a'r Rhyngrwyd wedi ei gyflawni. \n"
-"Mae wedi ei analluogi. \n"
-"\n"
-"Beth hoffech ei wneud?"
+msgid "Add to LVM"
+msgstr "Ychwanegu i LVM"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Mae Rhannu Cysylltiad a'r Rhyngrwyd wedi ei analluogi"
+msgid "DNS server"
+msgstr "Gwasanaethwr DNS"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Mae Rhannu Cysylltiad Ăą'r Rhyngrwyd wedi ei analluogi."
+msgid "Trinidad and Tobago"
+msgstr "Trinidad a Tobago"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disabling servers..."
-msgstr "Analluogi gwasanaethwyr..."
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr "Nid yw LPD na LPRng yn cynnal argraffyddion IPP.\n"
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "disable"
-msgstr "dymunol"
+msgid "simple"
+msgstr "syml"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Mae gosodiad Rhannu Cysylltiad a'r Rhyngrwyd wedi ei gyflawni. \n"
-"Mae wedi ei alluogi. \n"
-"\n"
-"Beth hoffech ei wneud?"
+msgid "Clear all"
+msgstr "Clirio i gyd"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Mae Rhannu Cysylltiad Ăą'r Rhyngrwyd wedi ei alluogi"
+msgid "No test pages"
+msgstr "Dim tudalennau prawf"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
-msgstr "Mae'n ddrwg gennym dim ond cnewyllyn 2.4 sy'n cael ei gynnal."
+msgid "Adapter %s: %s"
+msgstr "Addasydd %s: %s"
-#: ../../standalone/drakhelp:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
+msgid "Falkland Islands (Malvinas)"
+msgstr "Falkland Islands (Malvinas)"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Unknown model"
+msgstr "Model anhysbys"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check files/directories writable by everybody."
msgstr ""
-"Does dim porwr ar eich cyfrifiadur. Rhaid gosod un os ydych am archwilio'r "
-"system gymorth."
+"os wedi ei osod i iawn, gwirio ffeiliau/cyfeiriaduron ysgrifenadwy gan bawb."
-#: ../../standalone/drakperm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "authentication"
+msgstr "Dilysu"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Path"
-msgstr "Llwybr"
+msgid "Backup Now"
+msgstr "Cadw wrth Gefn Nawr"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "group :"
-msgstr "grwp:"
+msgid "/_File"
+msgstr "/_Ffeil"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "user :"
-msgstr "defnyddiwr :"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Tynnu'r argraffydd o Star Office/OpenOffice.org/GIMP."
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
#, c-format
-msgid "Path selection"
-msgstr "Dewis llwybr"
+msgid ""
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
+msgstr ""
+"Cychwyn hidlydd pecynnau ar gyfer cnewyllyn cyfres Linux 2.2 \n"
+"i greu mur gwarchod i amddiffyn eich peiriant rhag ymosodiadau \n"
+"o'r rhwydwaith."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "when checked, owner and group won't be changed"
-msgstr "wedi ei dicio, nid fydd y perchennog a'r grwp yn cael ei newid"
+msgid "Tamil (ISCII-layout)"
+msgstr "Tamil (cynllun TSCII)"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use group id for execution"
-msgstr "Defnyddio enw grwp i weithredu"
+msgid "Mayotte"
+msgstr "Mayotte"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use owner id for execution"
-msgstr "Defnyddio enw perchennog i weithredu"
+msgid "Creating auto install floppy..."
+msgstr "Creu disg meddal awto gosod"
-#: ../../standalone/drakperm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
-"Defnydd cyfeiriadur:\n"
-" dim ond perchennog y cyfeiriadur neu ffeil yn y cyfeiriadur hwn fydd yn "
-"cael ei ddileu."
+msgid "Searching for scanners ..."
+msgstr "Chwilio am sganiwyr..."
-#: ../../standalone/drakperm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Set-GID"
-msgstr "Set-GID"
+msgid "Partitioning"
+msgstr "Creu Rhanniadau"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Set-UID"
-msgstr "Set-UID"
+msgid "Russia"
+msgstr "Rwsia"
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "sticky-bit"
-msgstr "sticky-bit"
+msgid "ethernet card(s) detected"
+msgstr "cerdyn ethernet wedi ei ganfod"
-#: ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Property"
-msgstr "Eiddo"
+msgid "Syslog"
+msgstr "Syslog"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Permissions"
-msgstr "Caniatadau"
+msgid "Can't create catalog!"
+msgstr "Methu creu catalog!"
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Current user"
-msgstr "Derbyn presennol"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
+msgstr ""
+"Cwblhewch eich gosodiad diogelwch gyda'r feddalwedd hawdd ei defnyddio sy'n "
+"cynnwys darnau o safon uchel megis mur cadarn, gwasanaethwr a chleient "
+"rwydwaith preifat rhithiol (VPN), system canfod ymyrraeth a rheolwr traffig."
-#: ../../standalone/drakperm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "browse"
-msgstr "pori"
+msgid "Not enough free space for auto-allocating"
+msgstr "Nid oes digon o le ar gyfer awtoddynodi"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Edit current rule"
-msgstr "Golygu'r rheol bresennol"
+msgid "Set root password"
+msgstr "Gosod cyfrinair gwraidd"
-#: ../../standalone/drakperm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "edit"
-msgstr "golygu"
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
+msgstr ""
+"Nid oes gyrrwr rhydd ar gyfer eich cerdyn sain (%s) ond mae yrrwr perchnogol "
+"yn \"%s\" ."
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Delete selected rule"
-msgstr "Dileu'r rheol hwn"
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr ""
+"Ar ĂŽl newid maint rhaniad %s, bydd yr holl ddata ar y rhaniad yma yn cael ei "
+"golli"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "delete"
-msgstr "dileu"
+msgid "Internet connection configuration"
+msgstr "Ffurfweddiad cysylltiad Ăą'r Rhyngrwyd"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Add a new rule at the end"
-msgstr "Ychwanegu rheol newydd ar y diwedd"
+msgid "Scanning for TV channels"
+msgstr "Sganio am Sianel Teledu"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "add a rule"
-msgstr "ychwanegu rheol"
+msgid "Kernel:"
+msgstr "Kernel:"
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Move selected rule down one level"
-msgstr "Symud y rheol i lawr un lefel"
+msgid "/_About..."
+msgstr "/_Ynghylch..."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Down"
-msgstr "I lawr"
+msgid "Bengali"
+msgstr "Bengali"
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Move selected rule up one level"
-msgstr "Symud y rheol i fyny un lefel"
+msgid "Preference: "
+msgstr "Dewis"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Up"
-msgstr "I fyny"
+msgid "Wizard..."
+msgstr "Dewin..."
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "select perm file to see/edit"
-msgstr "dewis ffeil perm i weld/golygu"
+msgid "Services: %d activated for %d registered"
+msgstr "Gwasanaethau: %d wedi eu cychwyn ar gyfer %d wedi eu cofrestri"
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-"Mae Drakperm yn cael ei ddefnyddio i weld ffeiliau i'w defnyddio i drwsio "
-"caniatad, perchnogion, a grwpiau drwy msec.\n"
-"Mae modd i chi olygu eich rheolau eich hunfydd yn ysgrifennu droe y rheolau "
-"rhagosodedig."
+msgid "Create a bootdisk"
+msgstr "Creu disg cychwyn"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "permissions"
-msgstr "caniatadau"
+msgid "Solomon Islands"
+msgstr "Solomon Islands"
-#: ../../standalone/drakperm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "group"
-msgstr "grwp"
+msgid "(module %s)"
+msgstr "(modiwl %s)"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "user"
-msgstr "defnyddiwr"
+msgid "Workgroup"
+msgstr "Grwp gwaith"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "path"
-msgstr "llwybr"
+msgid "Printer host name or IP"
+msgstr "Enw'r gwesteiwr neu IP yr argraffydd"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Lleoliad ffeil auto_install.cfg"
+msgid "Host Path or Module"
+msgstr "Llwybr Gwesteiwr neu Fodwil "
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
+msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr ""
-"Dangoswch lle mae'r ffeil auto_install.cfg wedi ei leoli,\n"
-"\n"
-"Gadael yn wag os ydych am greu modd gosod yn awtomatig.\n"
-"\n"
+"Dylai enw'r argraffydd gynnwys llythrennau, rhifau a'r tanlinellu, yn unig"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
-"Heb ganfod delwedd CD neu DVD, copiwch y rhaglen osod a'r ffeiliau rpm."
+msgid "Show current interface configuration"
+msgstr "Dangoswch y ffurfweddiad rhag wyneb cyfredol"
-#: ../../standalone/drakpxe:1
+#: ../../help.pm:1
#, c-format
-msgid "No image found"
-msgstr "Heb ganfod delwedd"
+msgid "Development"
+msgstr "Datblygiad"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Installation image directory"
-msgstr "Cyfeiriadur delwedd gosod"
+msgid "Done"
+msgstr "Gorffen"
-#: ../../standalone/drakpxe:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
-"Dangoswch lle bydd y delwedd gosod ar gael.\n"
-"\n"
-"Os nad oes gennych gyfeiriadur yn barod, copiwch gynnwys y CD neu'r DVD.\n"
-"\n"
+msgid "Web Server"
+msgstr "Gwasanaethwr Gwe"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The DHCP end ip"
-msgstr "Enw terfyn DHCP"
+msgid "\tDo not include System Files\n"
+msgstr "\tPeidiwch cynnwys Ffeiliau System\n"
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "The DHCP start ip"
-msgstr "Enw cychwyn DHCP"
+msgid "Chile"
+msgstr "Chile"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
+msgstr ""
+"Mae'r gyrwyr argraffydd inkjet sydd wedi eu darparu gan Lexmark yn cynnal "
+"argraffyddion lleol, yn unig. Cysylltwch eich argraffydd i borth lleol neu "
+"ffurfweddwch ef i'r peiriant mae'n gysylltiedig ag ef."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
"\n"
+"Do not use \"scannerdrake\" for this device!"
msgstr ""
-"Mae'r gwasanaethwr DHCP yn caniatĂĄu i gyfrifiaduron eraill gychwyn drwy "
-"ddefnyddio PXE ar ystod\n"
-"penodol o gyfeiriadau\n"
-"Y cyfeiriad rhwydwaith yw %s gan ddefnyddio netmask o %s\n"
+"Mae eich dyfais aml bwrpas HP wedi cael ei ffurfweddu'n awtomatig i fedru "
+"sganio. Mae modd i chi sganio gyda \"scanimage\" (\"scanimage -d hp:%s\" i "
+"bennu pa un os oes gennych fwy nag un) o'r llinell orchymyn neu gyda rhag "
+"wynebau graffigol \"xscanimage\" neu \"xsane\". Os ydych yn defnyddio GIMP, "
+"medrwch sganio hefyd, drwy ddewis y man priodol yn y ddewislen \"Ffeil\"/"
+"\"Cipio\". Galwch hefyd \"man scanimage\" ar y linell orchymyn i dderbyn mwy "
+"o wybodaeth.\n"
"\n"
+"Peidiwch defnyddio \"scannerdrake\" ar gyfer y ddyfais hon."
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
#, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Rhyngwyneb %s (ar rwydwaith %s)"
+msgid "(already added %s)"
+msgstr "(wedi ychwanegu %s yn barod)"
-#: ../../standalone/drakpxe:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr ""
-"Dewiswch pa rhyngwyneb rhwydwaith i'w ddefnyddio ar gyfer y gwasanaethwr "
-"dhcp."
+msgid ", using command %s"
+msgstr ", defnyddio gorchymyn %s"
-#: ../../standalone/drakpxe:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Rydych ar fin ffurfweddu eich cyfrifiadur i gwasanaethwr PXE fel "
-"gwasanaethwr DHCP a gwasanaethwr\n"
-"TFTP i adeiladu gwasanaethwr gosod.\n"
-"Gyda'r nodwedd hwn bydd cyfrifiaduron eraill ar eich rhwydwaith lleol yn "
-"medru rhannu cyswllt rhyngrwyd y cyfrifiadur hwn.\n"
-"\n"
-"Gwnewch yn siwr eich bod wedi ffurfweddu eich mynediad Rhwydwaith/Rhyngrwyd "
-"gyda drakconnect cyn mynd ymhellach.\n"
-"\n"
-"Sylwer: bydd angen Addasydd Rhwydwaith un-pwrpas i greu Rhwydwaith Lleol "
-"(LAN)."
+msgid "Alt and Shift keys simultaneously"
+msgstr "Bysellau Alt a Shift gyda'i gilydd"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Installation Server Configuration"
-msgstr "Ffurfweddiad Gwasanaethwr Gosod"
+msgid "Flags"
+msgstr "Baneri"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "PXE Server Configuration"
-msgstr "Ffurfweddiad Gwasanaethwr PXE"
+msgid "Add/Del Users"
+msgstr "Ychwanegu/Diddymu Defnyddwyr"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please wait, setting security options..."
-msgstr "Arhoswch, gosod dewisiadau diogelwch..."
+msgid "Host/network IP address missing."
+msgstr "Cyfeiriad y gwestriwr/rhwydwaith ar goll."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please wait, setting security level..."
-msgstr "Arhoswch, gosod lefle diogelwch..."
+msgid "weekly"
+msgstr "bob wythnos"
-#: ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Periodic Checks"
-msgstr "Gwirydd Cyfnodol"
+msgid "Settings"
+msgstr "Gosodiadau"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "System Options"
-msgstr "Dewisiadau System"
+msgid "The entered host/network IP is not correct.\n"
+msgstr "Nid yw IP'r gwesteiwr/rhwydwaith yn gywir.\n"
-#: ../../standalone/draksec:1
+#: ../../any.pm:1
#, c-format
-msgid "Network Options"
-msgstr "Dewisiadau Rhwydwaith"
+msgid "Here is the full list of available countries"
+msgstr "Dyma restr lawn o'r gwledydd sydd ar gael"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Alternative test page (A4)"
+msgstr "Prawf tudalen arall (A4)"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
-"Mae modd gosod y dewisiadau canlynol i addasu\n"
-"diogelwch eich system. Os oes arnoch esboniadau, cliciwch ar cymorth.\n"
+"Os yw'r holl CDau sydd yn y rhestr gennych, cliciwch Iawn.\n"
+"Os nad oes gennych un ohonynt, Cliciwch Diddymu.\n"
+"Os mae dim ond rhai CDau sydd ar goll, yna cliciwch Iawn."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Security Administrator:"
-msgstr "Gweinyddwr Diogelwch:"
+msgid "Wait please"
+msgstr "Arhoswch"
-#: ../../standalone/draksec:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Security Alerts:"
-msgstr "Rhybuddion Diogelwch:"
+msgid "PAP"
+msgstr "PAP"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Security Level:"
-msgstr "Lefel diogelwch:"
+msgid "Backup user files"
+msgstr "Ffeiliau Defnyddiwr Cadw wrth Gefn"
-#: ../../standalone/draksec:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "(default value: %s)"
-msgstr "(gwerth rhagosodedig: %s)"
+msgid "New"
+msgstr "Newydd"
-#: ../../standalone/draksec:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-" to the Internet as a client.\n"
-"\n"
-"High: There are already some restrictions, and more automatic checks "
-"are run every night.\n"
-"\n"
-"Higher: The security is now high enough to use the system as a server "
-"which can accept\n"
-" connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-" should choose a lower level.\n"
-"\n"
-"Paranoid: This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-" features are at their maximum\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
"\n"
-"Security Administrator:\n"
-" If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-" email)"
-msgstr ""
-"Safonol: Dyma'r safon diogelwch sy'n cael ei argymell ar gyfer cyfrifiadur "
-"i'w ddefnyddio\n"
-" i gysylltu Ăą'r Rhyngrwyd fel cleient.\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
"\n"
-"Uchel: Mae rhai cyfyngiadau eisoes, ac mae gwiriadau'n cael eu rhedeg "
-"bob nos.\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
"\n"
-"Uchaf: Mae diogelwch yn ddigon uchel i ddefnyddio'r system fel "
-"gwasanaethwr sy'n medru\n"
-" derbyn cysylltiadau o nifer o gleientiau. Os mai eich "
-"peiriant yw'r unig gleient ar y\n"
-" Rhyngrwyd, dylech ddewis lefel is.\n"
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
"\n"
-"Paranoia: Mae'n debyg i'r lefel cynt ond mae'r system wedi ei gau'n llwyr a "
-"nodweddion diogelwch\n"
-" ar eu heithaf.\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
"\n"
-"Gweinyddwr Diogelwch:\n"
-" Os yw'r dewis 'Rhybuddion Diogelwch' wedi ei ddewis, bydd "
-"rhybuddion diogelwch yn cael eu\t anfon i'r defnyddiwr hwn (enw "
-"defnyddiwr neu e-bost)"
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
"\n"
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
+msgstr ""
+"Mae hwn yn fan pwysig ynghylch diogelwch eich system GNU/Linux; rhaid\n"
+"rhoi cyfrinair \"root\".\"root\" yw gweinyddwr y system a'r unig un sydd Ăą'r "
+"hawl\n"
+"i wneud diweddariadau, ychwanegu defnyddwyr, newid ffurfweddiad cyffredinol\n"
+"y system, ac yn y blaen. Yn fyr mae \"root\" yn medru gwneud popeth! Dyna\n"
+"pam mae'n rhaid dewis cyfrinair sy'n anodd ei ddyfalu - bydd DrakX yn dweud\n"
+" wrthych os yw'n rhy hawdd. Fel y gwelwch, mae modd peidio gorfod cynnig\n"
+" cyfrinair, ond rydym yn argymell yn erbyn hyn, hyd yn oed am un rheswm:\n"
+" peidiwch Ăą meddwl bod eich systemau gweithredu eraill yn ddiogel rhag\n"
+" camgymeriadau, gan eich bod wedi cychwyn o GNU/Linux. Gan fod \"root\" yn\n"
+" medru goresgyn unrhyw gyfyngiadau a dileu data'n anfwriadol ar bob "
+"rhaniad,\n"
+" drwy fynd at y rhaniadau'n ddi-hid, yna mae'n bwysig ei gwneud hi'n anodd "
+"bod\n"
+" yn \"root\".n\n"
"\n"
+"Dylai'r cyfrinair fod yn gyfuniad o rifau a llythrennau ac o leiaf 8 nod o "
+"hyd.\n"
+" Peidiwch ysgrifennu'r cyfrinair ar bapur - bydd yn ei gwneud hi'n rhy "
+"hawdd\n"
+" gwanhau'r system.\n"
"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
-msgstr ""
+"Er hynny, peidiwch Ăą gwneud y cyfrinair yn rhy hir neu gymhleth am fod rhaid "
+"i\n"
+"chi fedri ei gofio heb ormod o drafferth.\n"
"\n"
+"Ni fydd y cyfrinair yn cael ei ddangos ar y sgrin wrth i chi ei deipio. "
+"Felly bydd\n"
+" rhaid i chi deipio'r cyfrinair ddwywaith i leihau'r siawns o deipio gwall. "
+"Os ydych\n"
+"yn digwydd gwneud yr un gwall teipio ddwywaith, bydd rhaid defnyddio'r "
+"cyfrinair\n"
+" \"anghywir\" i gychwyn y tro cyntaf.\n"
"\n"
+"Os hoffech i fynediad i'r cyfrifiadur gael ei reoli gan wasanaethwr dilysu, "
+"cliciwch\n"
+"y botwm \"Uwch\".\n"
+"Os yw eich rhwydwaith yn defnyddio protocol gwasanaethau dilysu LDAP, NIS\n"
+"neu PDC Windows Domain, dewiswch un addas fel \"dilysu\",\n"
+"Os nad ydych yn gwybod, gofynnwch i'ch gweinyddwr rhwydwaith\n"
"\n"
-"Nodyn: os oes gennych gerdyn sain ISA PnP, bydd rhaid i chi ddefnyddio "
-"rhaglen sndconfig. Teipiwch \"sndconfig\" mewn consol."
+"Os ydych yn cael anhawsterau atgoffa cyfrineiriau, gallwch ddewis\n"
+"\"Dim cyfineiriau\", os na fydd eich cyfrifiadur yn cael cyswllt Ăą'r we ac "
+"rydych\n"
+"yn ymddiried yn y defnyddiwr."
-#: ../../standalone/draksound:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"If you do not know what to choose, stay with the default option."
msgstr ""
-"Nid oes Cerdyn Sain wedi ei ganfod ar eich peiriant. Gwriwch fod Cerdyn Sain "
-"sy'n cael ei gynnal gan Linux wedi ei osod yn gywir.\n"
-"\n"
-"\n"
-"Cewch ymweld Ăą'n cronfa ddata caledwedd yn:\n"
-"\n"
+"Yma mae angen dewis lefel diogelwch ar gyfer y peiriant. Fel rheol,\n"
+"y mwyaf agored yw'r peiriant, y mwyaf pwysig yw'r data yr uchaf\n"
+"ddylai'r lefel diogelwch fod neu fod gan y peiriant gysylltiad uniongyrchol\n"
+"gyda'r rhyngrwyd. Er hynny, mae diogelwch yn dod ar draul\n"
+"hwylustod. \n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid "No Sound Card detected!"
-msgstr "Heb ganfod Cerdyn Sain!"
+"Os nad ydych yn siwr beth i'w ddewis, dewiswch y rhagosodedig."
-#: ../../standalone/draksplash:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "%s BootSplash (%s) preview"
-msgstr "%s Rhagolwg Croeso Cychwyn (%s)"
+msgid "Load from floppy"
+msgstr "Llwytho o o ddisg meddal"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generating preview ..."
-msgstr "Cynhyrchu rhagolwg..."
+msgid "The following printer was auto-detected. "
+msgstr "Mae'r argraffydd canlynol wedi ei awtoganfod"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "You must choose an image file first!"
-msgstr "Rhaid dewis ffeil delwedd yn gyntaf!"
+msgid "Boot Floppy"
+msgstr "Disg Meddal Cychwyn"
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "ProgressBar color selection"
-msgstr "Dewis lliw ProgressBar"
+msgid "Norwegian"
+msgstr "Norwyaidd"
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
-msgstr "Does gan y thema ddim croeso cychwyn yn %s !"
+msgid "Searching for new scanners ..."
+msgstr "Chwilio am sganiwr newydd..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "saving Bootsplash theme..."
-msgstr "cadw thema Croeso cychwyn..."
+msgid "Apache World Wide Web Server"
+msgstr "Gwasanaethwr Gwe Fyd Eang Apache"
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "choose image file"
-msgstr "dewis ffeil delwedd"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "stepping of the cpu (sub model (generation) number)"
+msgstr "Graddiad y cpu (cynhyrchu rhif is-fodel)"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "choose image"
-msgstr "dewis ymyl"
+msgid "select path to restore (instead of /)"
+msgstr "dewis llwybr arall i adfer ( yn lle / )"
#: ../../standalone/draksplash:1
#, c-format
msgid "Configure bootsplash picture"
msgstr "Ffurfweddu llun croeso cychwyn"
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "Make kernel message quiet by default"
-msgstr "Gwneud neges y cnewyllyn yn dawel drwy ragosodiad"
-
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Display logo on Console"
-msgstr "Darddangos logo yn y Consol"
+msgid "China"
+msgstr "Tsieina"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose color"
-msgstr "dewis lliw"
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr ""
+"(Gwnewch yn siwr bod eich argraffyddion wedi eu cysylltu a'u troi mlaen).\n"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Save theme"
-msgstr "cadw thema"
+msgid "Georgia"
+msgstr "Georgia"
-#: ../../standalone/draksplash:1
+#: ../../standalone/printerdrake:1
#, c-format
-msgid "Preview"
-msgstr "rhagolwg"
+msgid "Reading data of installed printers..."
+msgstr "Darllen data am argraffyddion gosodedig..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "the color of the progress bar"
-msgstr "lliw'r bar cynnydd"
+msgid " Erase Now "
+msgstr "Dileu Nawr"
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "the height of the progress bar"
-msgstr "uchder y bar cynnydd"
+msgid "server"
+msgstr "Gwasanaethwr"
-#: ../../standalone/draksplash:1
+#: ../../install_any.pm:1
#, c-format
-msgid "the width of the progress bar"
-msgstr "lled y bar cynnydd"
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "Rhowch ddisg meddal wedi ei fformatio i FAT yng ngyrrwr %s"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-"bar cynnydd cydfesuryn y\n"
-"yn ei gornel uchaf chwith"
+msgid "yes means the processor has an arithmetic coprocessor"
+msgstr "mae iawn yn golygu fod gan y cydbrosesydd rhifyddegol"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-"bar cynnydd cydfesuryn x\n"
-"yn ei gornel uchaf chwith"
+msgid "Please Wait... Applying the configuration"
+msgstr "Arhoswch...Gosod y ffurfweddiad"
-#: ../../standalone/draksplash:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "text box height"
-msgstr "uchder blwch testun"
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Croeso i GRUB, y dewiswr systemau gweithredu!"
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "text width"
-msgstr "lled testun"
+msgid "Grub"
+msgstr "Grub"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"blwch testun cydfesuryn y\n"
-"mewn rhif nodau"
+msgid "SCSI controllers"
+msgstr "Rheolyddion SCSI"
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"blwch testun cydfesuryn x\n"
-"mewn rhif nodau"
+msgid " on LPD server \"%s\", printer \"%s\""
+msgstr "ar wasanaethwr LPD \"%s\", argraffydd \"%s\""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
#, c-format
-msgid "Browse"
-msgstr "Pori"
+msgid "Choosing a display manager"
+msgstr "Dewis rheowr arddangos"
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Theme name"
-msgstr "Enw Thema"
+msgid "Zeroconf Host name"
+msgstr "Enw Gwesteiwr Zeroconf"
-#: ../../standalone/draksplash:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "final resolution"
-msgstr "cydraniad terfynnol"
+msgid "IP address should be in format 1.2.3.4"
+msgstr "dylai cyfeiriad IP fod mewn fformat 1.2.3.4"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "first step creation"
-msgstr "creu'r cam cyntaf"
+msgid "Ecuador"
+msgstr "Ecuador"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
-"i weithio'n iawn mae angen 'ImageMagick' i gwblhau'r ffurfweddiad.\n"
-"Cliciwch \"Iawn\" i osod 'Image Magick' neu \"Diddymu\" i orffen"
+msgid "Add an item"
+msgstr "Ychwanegu eitem"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-"Nid oes Cerdyn Teledu wedi ei ganfod ar eich peiriant. Gwiriwch fod Cerdyn "
-"Fideo/Teledu sy'n cael ei gynnal gan Linux wedi ei osod yn gywir.\n"
-"\n"
-"\n"
-"Cewch ymweld Ăą'n cronfa ddata caledwedd yn:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+msgid "The printers on this machine are available to other computers"
+msgstr "Mae' argraffyddion y cyfrifiadur hwn ar gael ar gyfer rhai eraill"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "No TV Card detected!"
-msgstr "Heb ganfod Cerdyn Teledu!"
+msgid "I can't find needed image file `%s'."
+msgstr "Methu canfod ffeil delwedd angenrheidiol '%s'."
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "Nawr mae modd i chi redeg Xawtv (o dan XWindows)!\n"
+msgid "No sound card detected. Try \"harddrake\" after installation"
+msgstr "Heb ganfod cerdyn sain. Ceisiwch \"harddrake\" wedi'r gosodiad"
-#: ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Have a nice day!"
-msgstr "Diwrnod da i chi!"
+msgid ""
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
+msgstr ""
+"Porth annilys wedi ei gynnig: %s.\n"
+"Y fformat cywir yw \"port/tcp\" neu \"port/udp\", \n"
+"lle mae porth rhwng 1 a 65535."
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "XawTV isn't installed!"
-msgstr "Nid yw XawTV wedi ei osod!"
+msgid "Shell"
+msgstr "Cragen"
-#: ../../standalone/drakxtv:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Digwyddodd gwall wrth sganio am sianelu teledu"
+msgid "PCI"
+msgstr "PCI"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Scanning for TV channels"
-msgstr "Sganio am Sianel Teledu"
+msgid "Sao Tome and Principe"
+msgstr "Sao Tome a Principe"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Scanning for TV channels in progress ..."
-msgstr "Wrthi'n sganio am sianeli Teledu ..."
+msgid "Can't login using username %s (bad password?)"
+msgstr ""
+"Methu mewngofnodi gan ddefnyddio enw defnyddiwr %s (cyfrinair anghywir?)"
-#: ../../standalone/drakxtv:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Area:"
-msgstr "Ardal:"
+msgid "Azerbaidjani (latin)"
+msgstr "Azerbaidjan (lladin)"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "TV norm:"
-msgstr "Safon Teledu:"
+msgid "Package not installed"
+msgstr "Pecyn heb ei osod"
-#: ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr "Rhowch eich safon teledu a gwlad"
+msgid "Become a MandrakeExpert"
+msgstr "Dewch yn MandrakeExpert"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Australian Optus cable TV"
-msgstr "Teledu Cebl Opus Awstralia"
+msgid "American Samoa"
+msgstr "American Samoa"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Newzealand"
-msgstr "Zeland Newydd"
+msgid "Protocol"
+msgstr "Protocol"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "France [SECAM]"
-msgstr "Ffrainc(SECAM)"
+msgid "Copy fonts on your system"
+msgstr "CopĂŻo'r ffontiau ar eich system!"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "East Europe"
-msgstr "Dwyrain Ewrop"
+msgid "Harddrake help"
+msgstr "Cymoerh Harddrake"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "West Europe"
-msgstr "Gorllewin Ewrop"
+msgid "Bogomips"
+msgstr "Bogomips"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "China (broadcast)"
-msgstr "Tseina (darlledu)"
+msgid "Mandrake Terminal Server Configuration"
+msgstr "Ffurfweddiad Gwasanaethwr Terfynell Mandrake"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Japan (cable)"
-msgstr "Siapan (cable)"
+msgid ""
+"\n"
+" DrakBackup Report Details\n"
+"\n"
+"\n"
+msgstr ""
+"\n"
+" Manylion Adroddiad DrakBackup \n"
+"\n"
+"\n"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Japan (broadcast)"
-msgstr "Siapan (darlledu)"
+msgid "Restore all backups"
+msgstr "Adfer pob cadw wrth gefn"
-#: ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Canada (cable)"
-msgstr "Canada (cabl)"
+msgid "if set to yes, check open ports."
+msgstr "os wedi ei osod i iawn, gwirio pyrth agored."
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "USA (cable-hrc)"
-msgstr "UDA (cable-hrc)"
+msgid "This may take a moment to erase the media."
+msgstr "Bydd yn cymryd ychydig o amser i ddileu'r cyfrwng."
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "USA (cable)"
-msgstr "UDA (cabl)"
+msgid "You can't select/unselect this package"
+msgstr "Does dim modd i chi ddewis/dad-ddewis y pecyn"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "USA (broadcast)"
-msgstr "UDA (darlledu)"
+msgid "Warning"
+msgstr "Rhybudd"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"XawTV isn't installed!\n"
"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
+"- Other Files:\n"
msgstr ""
-"Nid yw XawTV wedi ei osod!\n"
-"\n"
-"\n"
-"Os oes gennych gerdyn teledu ond nid yw DrakX wedi ei ganfod (dim modiwl "
-"bttv ar saa7134\n"
-"yn \"/etc/modules\") na xawtv wedi ei osod, anfonwch canlyniad\n"
-"\"lspcidrake -v -f\" i \"install\\@mandrakesoft.com\"\n"
-"gyda phwnc \"undetected TV card\".\n"
"\n"
-"\n"
-"Mae modd ei osod wrth deipio \"urpmi xawtv\" fel gwraidd mewn consol."
+"- Ffeiliau Eraill: \n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "primary"
-msgstr "cynradd"
+msgid "Remote host name"
+msgstr "Enw gwesteiwr pell"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "secondary"
-msgstr "eilradd"
+msgid "deactivate now"
+msgstr "dad weithredu nawr"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
-msgstr "Cliciwch ar ddyfais yn y goeden chwith i gael at ei wybodaeth"
+msgid "access to X programs"
+msgstr "mynediad i raglenni X"
-#: ../../standalone/harddrake2:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Unknown"
-msgstr "Anhysbys"
+msgid "Computing the size of the Windows partition"
+msgstr "Cyfrifo maint rhaniad Windows"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "unknown"
-msgstr "anhysbys"
+msgid "Italy"
+msgstr "Yr Eidal"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Running \"%s\" ..."
-msgstr "Rhedeg \"%s\"..."
+msgid "Name of printer"
+msgstr "Enw'r argraffydd"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Run config tool"
-msgstr "Rhedeg offeryn ffurfweddu"
+msgid "disable"
+msgstr "dymunol"
-#: ../../standalone/harddrake2:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "Configure module"
-msgstr "Modd ffurfweddu"
+msgid "error unmounting %s: %s"
+msgstr "gwall dadosod %s: %s"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Information"
-msgstr "Gwybodaeth"
+msgid "Do it!"
+msgstr "Gwna!!"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Detected hardware"
-msgstr "Caledwedd canfyddwyd"
+msgid "Cayman Islands"
+msgstr "Cayman Islands"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Harddrake2 version "
-msgstr "Harddrake2 fersiwn "
+msgid "%s not responding"
+msgstr "Nid yw %s yn ymateb"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detection in progress"
-msgstr "Canfod ar waith"
+msgid "Select model manually"
+msgstr "Dewiswch y model gyda llaw"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Author:"
-msgstr "Awdur"
+msgid "Format"
+msgstr "Fformatio"
-#: ../../standalone/harddrake2:1
+#: ../../network/adsl.pm:1
#, c-format
msgid ""
-"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
msgstr ""
-"Dyma HardDrake, offeryn ffurfweddu caledwedd Mandrake.\n"
-"Fersiwn:"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "About Harddrake"
-msgstr "Ynghylch Harddrake"
+"Y ffordd mwyaf cyffredin i gysylltu Ăą adsl yw pppoe\n"
+"Mae rhai cysylltiadau'n defnyddio pptp, a rhai dhcp.\n"
+"Os nad ydych yn gwybod pa un, dewiswch 'pppoe'."
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "/_About..."
-msgstr "/_Ynghylch..."
+msgid "Various"
+msgstr "Amrywiol"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "/_Report Bug"
-msgstr "/_Adrodd ar Wallau"
+msgid "Zip"
+msgstr "Zip"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"\n"
+"\n"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
msgstr ""
-"Unwaith i chi ddewis dyfais, medrwch weld esboniad mewn meysydd yn y ffrĂąm "
-"dde [\"Gwybodaeth\"]"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Select a device !"
-msgstr "Dewis dyfais!"
+"\n"
+"\n"
+"Nid oedd Printerdrake yn medru adnabod eich argraffydd %s. Dewiswch yr un "
+"cywir o'r rhestr."
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Description of the fields:\n"
"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
msgstr ""
-"Disgrifiad y meysydd:\n"
"\n"
+"Nodwch yr argraffydd rydych am ei drosglwddo a chliciwch\n"
+"\"Trosglwyddo\"."
-#: ../../standalone/harddrake2:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Harddrake help"
-msgstr "Cymoerh Harddrake"
+msgid "PDQ"
+msgstr "PDQ"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "/_Fields description"
-msgstr "/_Disgrifiad meysydd"
+msgid "Albanian"
+msgstr "Albaniaidd"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "/_Help"
-msgstr "/_Cymorth"
+msgid "Lithuania"
+msgstr "Lithuania"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "/_Quit"
-msgstr "/_Gadael"
+msgid "Compact"
+msgstr "Cryno"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "/Awtoganfod_gyrrwr jazz"
+msgid "Detected model: %s %s"
+msgstr "Canfyddwyd model %s %s"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "/Autodetect _modems"
-msgstr "/Awtoganfod_modem"
+msgid "MandrakeSoft has selected the best software for you"
+msgstr "Mae Mandrake Linux wedi dewis y feddalwedd orau ar eich cyfer"
#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid ""
+"This is HardDrake, a Mandrake hardware configuration tool.\n"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
+msgstr ""
+"Dyma HardDrake, offeryn ffurfweddu caledwedd Mandrake.\n"
+"Fersiwn:"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "/Autodetect _printers"
-msgstr "/Awtoganfod_argraffydd"
+msgid "Local files"
+msgstr "Ffeiliau lleol"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "/_Options"
-msgstr "/_Dewisiadau"
+msgid "maybe"
+msgstr "efallai"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "the vendor name of the processor"
-msgstr "enw gwerthwr y prosesydd"
+msgid "Panama"
+msgstr "Panama"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "the vendor name of the device"
-msgstr "enw gwerthwr y ddyfais"
+msgid ""
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
+msgstr ""
+"Mae'n edrych fel bod gan eich cerdyn graffig gyswlltTV-OUT.\n"
+"Mae modd ei ffurfweddu i weithio drwy byffer ffrĂąm.\n"
+"\n"
+"Rhaid cysylltu eich cerdyn graffig Ăą'ch teledu cyn cychwyn eich "
+"cyfrifiadur.\n"
+"Dewiswch \"TVout\" yn y cychwynnydd\n"
+"\n"
+"Ydy'r nodwedd hon gennych?"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "Math o fws mae eich llygoden wedi cysylltu iddi"
+msgid "Monitor"
+msgstr "Monitor"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
-msgstr "Graddiad y cpu (cynhyrchu rhif is-fodel)"
+msgid ""
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
+"Rydych ar fin gosod y modd i argraffu i gyfrif Windows gyda chyfrinair. "
+"Oherwydd gwall ym mhensaernĂŻaeth meddalwedd cleient Samba mae'r cyfrinair yn "
+"cael ei osod mewn testun plaen ar y llinell orchymyn y cleient Samba sy'n "
+"cael ei ddefnyddio i anfon gwaith argraffu i'r gwasanaethwr Windows. Felly "
+"mae'n bosibl i bob defnyddiwr ar y peiriant i arddangos y cyfrinair ar y "
+"sgrĂźn drwy'r gorchymyn \"ps auxwww\".\n"
+"\n"
+"Rydym yn argymell eich bod yn defnyddio un o'r dulliau gwahanol hyn ( yn yr "
+"holl achosion hyn, rhaid i chi wneud yn siwr mae dim ond peiriannau o'ch "
+"rhwydwaith lleol chi sydd Ăą mynediad i'ch gwasanaethwr Windows, e.e. drwy "
+"gyfrwng mur cadarn).\n"
+"\n"
+"Defnyddio cyfrif heb gyfrinair ar eich gwasanaethwr Windows, defnyddio "
+"cyfrif \"Ymwelydd\" neu gyfrif arbennig ar gyfer argraffu. Peidiwch tynnu "
+"eich amddiffyniad cyfrinair o gyfrif personol na'r cyfrif gweinyddwr.\n"
+"\n"
+"Gosod eich gwasanaethwr Windows i wneud yr argraffydd ar gael o dan brotocol "
+"LPD. Yna gosod argraffu o'r peiriant hwn gyda chyswllt \"%s\" yn "
+"Printerdrake.\n"
+"\n"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Model stepping"
-msgstr "Stepio model"
+msgid "65 thousand colors (16 bits)"
+msgstr "65 mil o liwiau (16 did)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "the number of the processor"
-msgstr "rhif y prosesydd"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
+msgstr ""
+"\n"
+"Cadw ar Ddisg caled ar lwybr: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Processor ID"
-msgstr "Dynodiad Prosesydd"
+msgid "Size: %d KB\n"
+msgstr "Maint: %d KB\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "network printer port"
-msgstr "porth argraffydd rhwydwaith"
+msgid "Remove fonts on your system"
+msgstr "Tynnu ffontiau oddi ar eich system!"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "the name of the CPU"
-msgstr "enw'r prosesydd"
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
+msgstr ""
+"Rhybudd, mae'r addaswr rhwydwaith (%s) wedi ei ffurfweddu eisoes.\n"
+"\n"
+"Ydych chi eisiau ail ffurfweddiad awtomatig?\n"
+"\n"
+"Medrwch ei wneud gyda llaw ond mae'n rhaid i chi wybod beth ydych yn ei "
+"wneud."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Name"
-msgstr "Enw"
+msgid "Graphical interface at startup"
+msgstr "Rhyngwyneb graffigol wrth gychwyn"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "the number of buttons the mouse has"
-msgstr "nifer y botymau sydd gan y llygoden"
+msgid "Please enter the directory to save:"
+msgstr "Rhowch y cyfeiriadur i gadw iddo:"
#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "format of floppies supported by the drive"
+msgstr "Fformatio disgiau meddal derbyniol i'r gyrrwr"
+
+#: ../../raid.pm:1
#, c-format
-msgid "Number of buttons"
-msgstr "Nifer o fotymau"
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "Dim digon o raniadau ar gyfer RAID lefel %d\n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Official vendor name of the cpu"
-msgstr "Enw swyddogol gwerthwr y cpu"
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
+msgstr ""
+"Mae'r argraffyddion canlynol wedi eu ffurfweddi. Cliciwch ar un i newid ei "
+"osodiadau; ei wneud yn argraffydd rhagosodedig; i edrych am wybodaeth amdano."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Model name"
-msgstr "Enw'r model"
+msgid "Connected"
+msgstr "Wedi cysylltu"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
-msgstr "Cynnyrch y cpu (ee 8 am Pentiumlll,...]"
+msgid "USB printer \\#%s"
+msgstr "Argraffydd USB \\#\"%s"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Model"
-msgstr "Model"
+msgid "Macedonian"
+msgstr "Macedonaidd"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "hard disk model"
-msgstr "Model disg caled"
+msgid "Bridges and system controllers"
+msgstr "Rheolyddion pontydd a syatem"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "class of hardware device"
-msgstr "dosbarth y dyfais caledwedd"
+msgid "/File/_Save"
+msgstr "/Ffeil/_Cawd"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Media class"
-msgstr "Dosbarth y cyfrwng"
+msgid "Mali"
+msgstr "Mali"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Sub generation of the cpu"
-msgstr "Is gynnyrch y cpu"
+msgid "No details"
+msgstr "Dim manylion"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Level"
-msgstr "Lefel"
+msgid "very nice"
+msgstr "hyfryd iawn"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Format of floppies supported by the drive"
-msgstr "Fformatio disgiau meddal derbyniol i'r gyrrwr"
+msgid "Preview"
+msgstr "rhagolwg"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Floppy format"
-msgstr "Fformatio disg meddal"
+msgid "Remote Control"
+msgstr "Rheoli o Bell"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
-msgstr ""
-"Nid yw rhai prosesyddion i486DX-100 cynnar yn medru dychwelyd i'w cyflwr "
-"gweithredu a'r oĂŽ defnyddio \"halt\""
+msgid "Please select media for backup..."
+msgstr "Dewiswch y cyfrwng ar gyfer cadw wrth gefn..."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Halt bug"
-msgstr "Gwall halt"
+msgid "XFree86 server: %s\n"
+msgstr "Gwasanaethwr XFree86: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
-"Roedd rhai Pentium cynnar yn wallus ac yn rhewi wrth ddadgodio F00F bytecode"
+msgid "Allow Thin Clients"
+msgstr "CaniatĂĄu Cleientiaid Tenau"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "F00f bug"
-msgstr "Gwall F00f"
+msgid "Georgian (\"Russian\" layout)"
+msgstr "Georgaidd (gosodiad \"Rwsiaidd\")"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
-"mae iawn yn golygu fod gan y cydbrosesydd fector eithriad yn gysylltiaedig"
+msgid "/_Options"
+msgstr "/_Dewisiadau"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr "P'un ai oes gan yr FPU fector irq"
+msgid "Your printer model"
+msgstr "Model eich argraffydd"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr "mae iawn yn golygu fod gan y cydbrosesydd rhifyddegol"
+msgid ""
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
+msgstr ""
+"\n"
+"\n"
+"(RHYBUDD! Rydych yn defnyddio XFS ar gyfer eich rhaniad gwraidd,\n"
+"bydd creu disg cychwyn ar ddisg meddal 1.44Mb'n debygol o fethu,\n"
+"oherwydd mae XFS yn gofyn am yrrwr mawr iawn)."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Is FPU present"
-msgstr "Yw'r FPU yn bresennol"
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
+msgstr ""
+"\n"
+"- Dileu ffeiliau tar y disg caled wedi'r cadw wrth gefn.\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
+"No CD or DVD image found, please copy the installation program and rpm files."
msgstr ""
-"Mae gan brosesyddion Pentium cynnar wall yn eu prosesydd pwynt arnofio nad "
-"yw'n ymgyrraedd Ăą'r cywirdeb angenrheidiol wrth berfformio Floating point "
-"DIVision (FDIV)"
+"Heb ganfod delwedd CD neu DVD, copiwch y rhaglen osod a'r ffeiliau rpm."
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Fdiv bug"
-msgstr "Gwall Fdiv"
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "Offeryn ffurfweddiad amlbwrpas Mandrake"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr "Baneri cpu'n cael eu dangos gan y cnewyllyn"
+msgid "Save"
+msgstr "Gorffen"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Flags"
-msgstr "Baneri"
+msgid "The %s is unsupported"
+msgstr "Nid yw %s yn cael ei gynnal"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr "y modiwl o'r cnewyllyn GNU/Linux sy'n trin y ddyfais honno"
+msgid "Load the drivers for your usb devices."
+msgstr "Llwytho'r gyrrwyr ar gyfer eich dyfeisiau usb."
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Module"
-msgstr "Modiwl"
+msgid "Disk"
+msgstr "Disg"
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr "enw dyfais deinamig yn cael ei gynhyrchu gan incore kernel devfs"
+msgid "Enter a printer device URI"
+msgstr "Rhowch URI dyfais argraffydd"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "New devfs device"
-msgstr "Dyfais devfs newydd"
+msgid ""
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
+msgstr ""
+"Mae llwyddiant MandrakeSoft yn seiliedig ar egwyddor Meddalwedd Rhydd. Mae "
+"eich system weithredu newydd yn ganlyniad gwaith cydweithredol ar ran y "
+"Gymuned Linux byd-eang"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "old static device name used in dev package"
-msgstr "hen enw dyfais sefydlog yn cael ei ddefnyddio mewn pecyn dev"
+msgid "Israel"
+msgstr "Israel"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Old device file"
-msgstr "Hen ffeil dyfais"
+msgid "French Guiana"
+msgstr "French Guiana"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "This field describes the device"
-msgstr "Mae'r maes yn disgrifio'r ddyfais"
+msgid "default:LTR"
+msgstr "default:LTR"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
-msgstr "Amledd y cpu mewn MHz (y nifer o gyfarwyddiadau'r eiliad)"
+msgid "add a rule"
+msgstr "ychwanegu rheol"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Frequency (MHz)"
-msgstr "Amledd (MHz)"
+msgid "A command line must be entered!"
+msgstr "Rhaid rhoi llinell gorchymyn!"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
-msgstr "Lefel gwybodaeth i'w gael drwy gyfarwyddid cpuid"
+msgid "Select user manually"
+msgstr "Dewis defnyddwyr gyda llaw"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Cpuid level"
-msgstr "Lefel cpuid"
+msgid "Transfer printer configuration"
+msgstr "Trosglwyddo ffurfweddiad yr argraffydd"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
-msgstr "Teulu'r cpu (ee 6 am ddosbarth i686)"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "Ydych chi am alluogi argraffu ar yr argraffyddion enwwi'r uchod?\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Cpuid family"
-msgstr "Teulu cpuid"
+msgid ""
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
+msgstr ""
+"I hyn weithio gyda 2WK PDC, bydd angen i chi gael y gweinyddwr i redeg C:"
+"\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add ac "
+"ailgychwyn y gwasanaethwr.Bydd angen hefyd yr enw defnyddiwr/cyfrinair "
+"Gweinyddiaeth Parth i uno'r peiriant Ăą'r parth Windows(NM).\n"
+"Os nad yw'r rhwydwaith wedi ei alluogi eto, bydd DrakX yn ceisio ymuno Ăą'r "
+"parth ar ol y cam o gychwyn y rhwydwaith.\n"
+"Os bydd y cam hwn yn methu am ryw reswm ac nid yw dilysiad yn gweithio, "
+"rhedwch 'smbpasswd -j DOMAIN -U USER%%PASSWORD' gan ddefnyddio eich Parth "
+"Windows(NM), a'ch Enw Defnyddiwr Gweinyddol/Cyfrinair ar ĂŽl cychwyn eich "
+"system.\n"
+"Bydd y gorchymyn 'wbinfo -t' yn gwirio a yw eich cyfrinachau dilysu'n addas."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr "A oes gan y cpu y Cyrix 6x86 Coma bug"
+msgid "%s (Port %s)"
+msgstr "%s(Porth %s)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Coma bug"
-msgstr "Coma bug"
+msgid "Use network connection to backup"
+msgstr "Defnyddiwch cysylltiad rhwydwaith i gadw wrth gefn"
-#: ../../standalone/harddrake2:1
+#: ../../security/help.pm:1
#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr "nodweddion arbennig y gyrrwr (llosgi neu gynnal DVD)"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
+msgstr ""
+"Ymresymniadau: (arg)\n"
+"\n"
+"Galluogi/Analluogi sulogin(8 mewn defnydd defnyddiwr unigol."
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
+"Mae'n amser penderfynu pa raglenni rydych am eu gosod ar eich\n"
+"system. Mae yna filoedd o becynnau ar gael ar gyfer Mandrake Linux, ond\n"
+"does dim disgwyl i chi wybod amdanyn nhw i gyd.\n"
+"\n"
+"Mae pecynnau wedi eu trefnu i grwpiau yn dibynnu ar ddefnydd penodol\n"
+"eich peiriant. Mae gan Mandrake Linux bedair gosodiad rhagosodedig. Mae\n"
+"modd meddwl amdanynt fel blychau ar gyfer pecynnau amrywiol, fel mae modd\n"
+"i \"Fan Gwaith\" fod a rhaglenni o \"Datblygu\" wedi eu gosod.\n"
+"\n"
+"Mae'r pecynnau wedi eu didoli yn grwpiau sy'n cyfateb i ddefnydd penodol\n"
+"ar eich peiriant. Mae'r grwpiau wedi eu rhannu yn bedair adran:\n"
+"\n"
+" * \"Man Gwaith\": os ydych yn bwriadu defnyddio eich peiriant fel man\n"
+"gwaith yna dewiswch un o'r grwpiau cyfatebol.\n"
+"\n"
+" * \"Datblygu\": os yw'r peiriant yn cael ei ddefnyddio i raglenni, "
+"dewiswch\n"
+" y grwpiau perthnasol\n"
+"\n"
+" * \"Gwasanaethwr\": os ydych am i'r peiriant gael ei ddefnyddio fel\n"
+"gwasanaethwr bydd modd i chi ddewis y gwasanaethau cyffredin rydych am\n"
+"eu cael ar eich peiriant.\n"
+"\n"
+" * \"Amgylchedd Graffigol\": dyma'r lle i ddewis eich amgylchedd graffigol.\n"
+"Rhaid dewis o leiaf un er mwyn cael man gwaith graffigol!\n"
+"\n"
+"Bydd symud cyrchwr y llygoden dros enw grwp yn amlygu esboniad byr am y\n"
+"grwp hwnnw. Os ydych wedi dad-ddewis pob grwp wrth wneud gosodiad\n"
+"arferol ac nid uwchraddiad), bydd dialog yn ymddangos a chynnig\n"
+"dewisiadau amrywiol ar gyfer y gosodiad lleiaf\n"
+"\n"
+" * \"Gyda X\" Gosod y nifer lleiaf o becynnau i gael penbwrdd graffigol\n"
+"i weithio.\n"
+"\n"
+" * \"Gyda dogfennaeth elfennol\" Gosod y system sylfaenol yn ogystal\n"
+"a gwasanaethau elfennol a'u dogfennau. Mae'r gosodiad hwn yn addas\n"
+"ar gyfer gosod gwasanaethwr.\n"
+"\n"
+" * \"Gosodiad bychan iawn\" Gosod y lleiafswm posibl i greu system Linux\n"
+"llinell orchymyn weithredol. Tua 65MB o faint.\n"
+"\n"
+"Mae clicio blwch \"Dewis pecynnau unigol\". yn ddefnyddiol os ydych\n"
+"yn gyfarwydd gyda'r pecynnau sy'n cael eu cynnig neu os ydych eisiau\n"
+"rheolaeth lwyr dros yr hyn sy'n cael ei osod\n"
+"\n"
+"Os ydych wedi cychwyn y gosodiad ym modd \"Diweddaru\", bydd modd i\n"
+" chi ddad-ddewis pob grwp er mwyn osgoi gosod unrhyw becyn newydd.\n"
+"Mae hyn yn ddefnyddiol ar gyfer trwsio neu ddiweddaru system sy'n bod "
+"eisoes.\n"
+"\n"
+" "
+
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Drive capacity"
-msgstr "Maint y gyrrwr"
+msgid "Accept user"
+msgstr "Derbyn defnyddiwr"
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, c-format
-msgid "Size of the (second level) cpu cache"
-msgstr "Maint storfa cpu (ail lefel)"
+msgid "Server"
+msgstr "Gwasanaethwr"
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Cache size"
-msgstr "Maint storfa"
+msgid "Bad choice, try again\n"
+msgstr "Dewis gwael, ceisiwch eto\n"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
-msgstr ""
-"- dyfeisiau pci: dyma slot PCI, dyfais a gwaith y cerdyn\n"
-"- dyfeisiau ide: mae'r ddyfais un ai yn was neu feistr\n"
-"- dyfeisiau scsi: dynodiad dyfeisiau scsi a'r bws scsi"
+msgid "Heard and McDonald Islands"
+msgstr "Heard and McDonald Islands"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Location on the bus"
-msgstr "Lleoliad ar y bws"
+msgid "No alternative driver"
+msgstr "Dim gyrwyr eraill"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Toggle to expert mode"
+msgstr "Cyffredinol > Arbennigwr"
+
+#: ../../printer/cups.pm:1
+#, c-format
+msgid "(on this machine)"
+msgstr "(ar y peiriant hwn)"
+
+#: ../../network/network.pm:1
+#, c-format
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "Dylai cyfeiriad Porth fod mewn fformat 1.2.3.4"
+
+#: ../../network/modem.pm:1
#, c-format
msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+"\"%s\" based winmodem detected, do you want to install needed software ?"
msgstr ""
-"- dyfeisiau PCI ac USB : dyma restr gwerthwyr, dyfais, iswerthwyr ac "
-"isddyfais PCI/USB"
+"Wedi canfod winmodem \"%s\" , hoffech chi osod y feddalwedd angenrheidiol?"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bus identification"
-msgstr "Dynodiad bws"
+msgid "Looking at packages already installed..."
+msgstr "Edrych arbecynnau wedieu gosod yn barod"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+msgid "Use Differential Backups"
msgstr ""
-"Mae angen i'r cnewyllyn GNU/Linux gyflawni cyfrif cylch wrth gychwyn i "
-"gychwyn y cyfrif amser. Mae'r canlyniad yn cael ei gadw fel bogomips fel "
-"ffordd o \"feincnod\" y cpu."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Bogomips"
-msgstr "Bogomips"
+msgid "Driver"
+msgstr "Gyrrwr"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "Sianel EIDE/SCSI"
+msgid ""
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
+msgstr "Bydd Linuxconf yn trefnu ar adegau i gyflawnu amrywiol"
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Channel"
-msgstr "Sianel"
+msgid "Printer on remote lpd server"
+msgstr "Argraffydd ar wasanaethwr lpd pell"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
msgstr ""
-"dyma'r bws corfforol i'r ddyfais gael ei gysylltu iddo(e.e. PCI, USB,...)"
+"Cyn gosod unrhyw ffontiau, gwnewch yn siwr bod gennych yr hawl i'w defnyddio "
+"a'u gosod ar eich system.\n"
+"\n"
+"- Medrwch osod y ffontiau yn y dull arferol. Mewn achosion prin, gall "
+"ffontiau ffug rewi eich Gwasanaethwr X."
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
+msgstr ""
+"Yaboot yw'r cychwynnydd ar gyfer caledwedd NewWorld MacIntosh. Mae'n\n"
+"medru cychwyn GNU/Linux, MacOS neu MacOSX os ydynt ar eich peiriant.\n"
+"Fel rheol, mae'r systemau gweithredu hyn yn cael eu canfod yn gywir a'u\n"
+"gosod. Os nad yw hyn yn digwydd, mae modd i chi ychwanegu eu cofnod\n"
+"gyda llaw ar y sgrĂźn hwn. Byddwch ofalus i ddewis y paramedrau cywir.\n"
+"\n"
+"Prif ddewisiadau Yaboot yw:\n"
+"\n"
+" * Cychwyn Neges: neges testun syml sy'n cael ei ddangos cyn yr anogwr\n"
+" cychwyn\n"
+"\n"
+" * Cychwyn y Ddyfais: yn dangos lle rydych am osod yr wybodaeth\n"
+"angenrheidiol i gychwyn GNU/Linux. Yn gyffredinol, byddwch wedi creu\n"
+"rhaniad ymlwythwr yn gynt, i ddal yr wybodaeth.\n"
+"\n"
+" * Oediad Open Firmware: yn wahanol i LILO, mae yna ddau oediad ar gael\n"
+"gyda yaboot. Mae'r cyntaf yn cael ei fesur mewn eiliadau a dyma pryd hyn\n"
+"mae modd dewis rhwng CD, cychwyn OF, MacOS neu Linux\n"
+"\n"
+" * Oediad Cychwyn y Cnewyllyn: mae'r oediad yn debyg i oediad cychwynLILO. "
+"Wedi dewis Linux, bydd oediad o 0.1 eiliad cyn bod eich cnewyllyn\n"
+"rhagosodedig yn cael ei ddewis.\n"
+"\n"
+" * Galluogi Cychwyn o'r CD?: mae dewis hwn yn caniatĂĄu i chi ddewis \"C\"\n"
+"am CD ar anogwr y cychwyn cyntaf.\n"
+"\n"
+" * Galluogi Cychwyn OF?: mae dewis hwn yn caniatĂĄu i chi ddewis |\"N\"\n"
+"am Open Firmware ar anogwr y cychwyn cyntaf.\n"
+"\n"
+" * System Weithredu Rhagosodedig: mae modd dewis pa system weithredu\n"
+"fydd yn cychwyn drwy ragosodiad pan ddaw'r Open Firmware i ben."
+
+#: ../../mouse.pm:1
#, c-format
-msgid "Bus"
-msgstr "Bws"
+msgid "No mouse"
+msgstr "Dim llygoden"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "rhestr o yrrwr eraill ar gyfer eich cerdyn sain"
+msgid "Germany"
+msgstr "Yr Almaen"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Alternative drivers"
-msgstr "Gyrrwyr eraill"
+msgid "Austria"
+msgstr "Awstria"
-#: ../../standalone/keyboarddrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Ydych chi eisiau i'r Backspace ddychwelyd Dileu yny consol?"
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr "Rhedwch \"sndconfig\" wedi'r gosodiad i ffurfweddu'ch cerdyn sain"
-#: ../../standalone/keyboarddrake:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Dewiswch gynllun allweddell"
+msgid "Collapse Tree"
+msgstr "Cau'r goeden"
-#: ../../standalone/livedrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Methu cychwyn diweddariad byw!!! \n"
+msgid "Auto Install Configurator"
+msgstr "Ffurfweddwr Awto-Osod"
-#: ../../standalone/livedrake:1
+#: ../../steps.pm:1
+#, c-format
+msgid "Configure networking"
+msgstr "Ffurfweddu rhwydwaith"
+
+#: ../../any.pm:1
#, c-format
+msgid "Where do you want to install the bootloader?"
+msgstr "Lle rydych chi eisiau gosod y cychwynnydd?"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
msgstr ""
-"Rhowch y CD Gosod yn eich gyrwr a chlicio Iawn ar ĂŽl gorffen\n"
-"Os nad yw gennych, cliciwch Dileu i osgoi diweddaru."
+"Dewiswch eich dewis iaith ar gyfer y gosod a'r defnydd o'r system yn\n"
+"effeithio iaith y ddogfennaeth, y gosodwr a'r system yn gyffredinol.\n"
+"Dewiswch eich ardal ac yna eich iaith.\n"
+"\n"
+"Bydd clicio ar y botwm \"Uwch\" yn caniatĂĄu i chi ddewis ieithoedd eraill\n"
+"i'w gosod ar eich peiriant gwaith. Bydd dewis ieithoedd eraill yn gosod\n"
+"ffeiliau penodol sy'n cynnwys dogfennaeth a rhaglenni yn yr ieithoedd\n"
+" hynny. Er enghraifft, os ydych yn westeiwr ar gyfer defnyddwyr o Sbaen,\n"
+" dewiswch \"Gymraeg\" fel y brif iaith yng ngolwg coeden ac yn yr Uwch\n"
+" cliciwch ar y seren lwyd sy'n cyfateb i \"Sbaeneg\". \n"
+"\n"
+"Sylwer bod modd gosod mwy nag un iaith. Mae modd i chi ddewis mwy\n"
+"nag un, neu hyd yn oed eu gosod i gyd, drwy ddewis y blwch \"Pob iaith\".\n"
+"Mae dewis cefnogaeth i bob iaith yn golygu gosod cyfieithiadau, ffontiau, \n"
+"gwiryddion sillafu, ag ati, ar gyfer yr iaith honno.Yn ychwanegol mae dewis\n"
+"\"Defnyddio Unicode\" yn gorfodi'r system i ddefnyddio unicode (UTF-8).\n"
+"Sylwer mai nodwedd arbrofol yw hon . Os ydych yn dewis ieithoedd\n"
+"gwahanol sy'n defnyddio amgodiad gwahanol bydd y cefnogaeth i utf-8\n"
+"yn cael ei osod, beth bynnag.\n"
+"\n"
+"I newid rhwng yr ieithoedd amrywiol sydd ar y system medrwch gychwyn\n"
+"y gorchymyn \"/usr/sbin/localedrake\" fel \"gwraidd\" i newid yr iaith\n"
+"sy'n cael ei ddefnyddio gan y system gyfan. Bydd rhedeg y gorchymyn fel\n"
+"defnyddiwr cyffredin yn gweithio dim ond ar gyfer yr unigolyn hwnnw."
-#: ../../standalone/livedrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Change Cd-Rom"
-msgstr "Newid CD-Rom"
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr "Nid yw %s yn cael ei gynnal gan y fersiwn hwn o Mandrake Linux"
-#: ../../standalone/localedrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-"Mae'r newid wedi ei gyflawni, ond i fod yn effeithiol mae'n rhaid i chi "
-"allgofnodi"
+msgid "DHCP client"
+msgstr "Cleient DHCP"
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Save as.."
-msgstr "Cadw fel..."
+msgid "Restoring from file %s failed: %s"
+msgstr "Methodd adfer o ffeil %s: %s"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please enter your email address below "
-msgstr "Rhowch eich cyfeiriad e-bost islaw"
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Llygoden Logitech (cyfresol, hen fath C7)"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "alert configuration"
-msgstr "ffurfweddiad rhybudd"
+msgid "Are you sure that you want to set up printing on this machine?\n"
+msgstr "Ydych chi'n siwr eich bod am osod argraffu ar y peiriant hwn?\n"
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Byddwch yn derbyn rhybudd os yw'r llwyth yn uwch na'r gwerth hwn"
+msgid "New devfs device"
+msgstr "Dyfais devfs newydd"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "load setting"
-msgstr "gosodiad llwyth"
+msgid "ERROR: Cannot spawn %s."
+msgstr "GWALL; methu taenu %s."
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr "Byddwch yn derbyn rhybudd os na fydd un o'r gwasanaethu hyn yn rhedeg"
+msgid "Boot Style Configuration"
+msgstr "Ffurfweddu'r Math o Gychwyn"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Automatic time synchronization"
+msgstr "Cydweddi amser awtomatig (defnyddio NTP)"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "service setting"
-msgstr "gosodiad gwasanaeth"
+msgid "Backup files not found at %s."
+msgstr "Heb ganfod y ffeiliau wrth gefn yn %s."
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Xinetd Service"
-msgstr "Gwasanaeth Xinetd"
+msgid "Thank you for choosing Mandrake Linux 9.1"
+msgstr "Diolch am ddewis Mandrake Linux 9.1"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Webmin Service"
-msgstr "Gwasanaethau Webmin"
+msgid "Armenian (phonetic)"
+msgstr "Armenaidd (ffonetig)"
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "SSH Server"
-msgstr "Gwasanaethwr SSH"
+msgid "Card model:"
+msgstr "Model cerdyn:"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Samba Server"
-msgstr "Gwasanaethwr Samba"
+msgid "Thin Client"
+msgstr "Cleient Tenau"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Postfix Mail Server"
-msgstr "Gwasanaethwr E-bost Postfix"
+msgid "Start Server"
+msgstr "Cychwyn y Gwasanaethwr"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ftp Server"
-msgstr "Gwasanaethwr Ftp"
+msgid "Turkmenistan"
+msgstr "Turkmenistan"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Domain Name Resolver"
-msgstr "Datrysydd Enw Parth"
+msgid "All remote machines"
+msgstr "Pob cyfrifiadur pell"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "Gwasanaethwr Gwe Fyd Eang Apache"
+msgid "Install themes"
+msgstr "Gosod themĂąu"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
msgstr ""
-"Croeso i'r gwasanaeth ffurfweddu e-bost\n"
-"\n"
-"Yma bydd modd i chi osod y system rhybuddio.\n"
-
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "Mail alert configuration"
-msgstr "Ffurfweddiad rhybudd e-bost"
+" yn diweddaru 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft."
+"com>"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "Mail alert"
-msgstr "Rhybudd e-bost"
+msgid "Espanol"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "arhoswch, dosbarthu ffeil: %s"
+msgid "Preparing installation"
+msgstr "Paratoi'r gosodiad"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Content of the file"
-msgstr "Cynnwys y ffeil"
+msgid "Edit selected host/network"
+msgstr "Golygu'r gwesteiwr/rhwydwaith"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Calendar"
-msgstr "Calendr"
+msgid "Add User -->"
+msgstr "Pob Defnyddiwr -->"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose file"
-msgstr "Dewis ffeil"
+msgid "Nauru"
+msgstr "Nauru"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "but not matching"
-msgstr "ond heb fod yn cydweddu"
+msgid "True Type fonts installation"
+msgstr "Gosod ffontiau True Type"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "matching"
-msgstr "cydweddu"
+msgid "Auto-detect printers connected directly to the local network"
+msgstr ""
+"Awtoganfod argraffyddion sy'n gysylltiedig yn uniongyrchol Ăą'r rhwydwaith "
+"lleol"
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Settings"
-msgstr "Gosodiadau"
+msgid "LAN configuration"
+msgstr "Ffurfweddiad y Rhwydwaith Lleol"
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "A tool to monitor your logs"
-msgstr "Offeryn i fonitro eich cofnodion"
+msgid "hard disk model"
+msgstr "Model disg caled"
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "search"
-msgstr "chwilio"
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "Does dim modd defnyddio Cyfrol Resymegol LVM ar gyfer pwynt gosod %s"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Mandrake Tools Explanation"
-msgstr "Esboniadau Offer Mandrake"
+msgid "Get Windows Fonts"
+msgstr "Estyn Ffontiau Windows"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Syslog"
-msgstr "Syslog"
+msgid "Mouse Systems"
+msgstr "Systemau Llygoden"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Messages"
-msgstr "Negeseuon"
+msgid "Iranian"
+msgstr "Iranaidd"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "User"
-msgstr "Defnyddiwr"
+msgid "Croatia"
+msgstr "Croatia"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "/Help/_About..."
-msgstr "/Cymorth/_Ynghylch..."
+msgid "Gateway:"
+msgstr "Mynedfa:"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Options/Test"
-msgstr "/Dewisiadau/Test"
+msgid "Add server"
+msgstr "Ychwanegu gwasanaethwr"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/File/-"
-msgstr "/Ffeil/-"
+msgid "Remote printer name"
+msgstr "Enw'r argraffydd pell"
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "/File/Save _As"
-msgstr "/Ffeil/Cawd _fel"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together in order to highly reduce hacking risks."
+msgstr ""
+"Mae gan Mandrake Linux offer wedi eu cynllunio i greu'r fersiwn mwyaf diogel "
+"o Linux erioed: Draksec, system o offer rheoli diogelwch, a mur cadarn iawn "
+"wedi eu cyplysu i leihau'r posibilrwydd o hacio."
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "<control>S"
-msgstr "<control>S"
+msgid "Device: "
+msgstr "Dyfais: "
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, c-format
-msgid "/File/_Save"
-msgstr "/Ffeil/_Cawd"
+msgid "Printerdrake"
+msgstr "Printerdrake"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "<control>O"
-msgstr "<control>O"
+msgid "License agreement"
+msgstr "Cytundeb trwyddedu"
-#: ../../standalone/logdrake:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "/File/_Open"
-msgstr "/Ffeil/_Agor"
+msgid "System Options"
+msgstr "Dewisiadau System"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "<control>N"
-msgstr "<control>N"
+msgid "Please enter the directory where backups are stored"
+msgstr "Rhowch y cyfeiriadur lle mae'r ffeiliau wrth gefn yn cael eu cadw"
-#: ../../standalone/logdrake:1
+#: ../../security/level.pm:1
#, c-format
-msgid "/File/_New"
-msgstr "/Ffeil/_Newydd"
+msgid "Please choose the desired security level"
+msgstr "Dewiswch lefel diogelwch"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Show only for the selected day"
-msgstr "Dangos ar y diwrnod penodol yn unig"
+msgid "This host is already in the list, it cannot be added again.\n"
+msgstr "Mae'r gwesteiwr ar y rhestr yn barod, does dim modd ei ychwanegu.\n"
-#: ../../standalone/mousedrake:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Emulate third button?"
-msgstr "Efelychu'r trydydd botwm?"
+msgid ", USB printer"
+msgstr "argraffydd USB"
-#: ../../standalone/mousedrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Please choose your mouse type."
-msgstr "Dewiswch math eich llygoden"
+msgid "Choose the applications that will support the fonts:"
+msgstr "Dewiswch y rhaglenni fydd yn cynnal ffontiau:"
-#: ../../standalone/net_monitor:1
+#: ../../steps.pm:1
#, c-format
-msgid "Connect %s"
-msgstr "Cysylltu %s"
+msgid "Configure X"
+msgstr "Ffurfweddu X"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Disconnect %s"
-msgstr "Dadgysylltu %s"
+msgid "Turkish (traditional \"F\" model)"
+msgstr "Twrcaidd (model traddodiadol \"F\")"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Rhybudd, mae cysylltiad arall gyda'r rhyngrwyd wedi ei ganfod, efallai'n "
-"defnyddio eich rhwydwaith."
+msgid "Congratulations!"
+msgstr "Llongyfarchiadau!"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "received"
-msgstr "derbyniwyd"
+msgid "Use owner id for execution"
+msgstr "Defnyddio enw perchennog i weithredu"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "transmitted"
-msgstr "darlledwyd"
+msgid "Down"
+msgstr "I lawr"
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "received: "
-msgstr "derbyniwyd:"
+msgid "Raw printer (No driver)"
+msgstr "Argraffydd crai (dim gyrrwr)"
-#: ../../standalone/net_monitor:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "sent: "
-msgstr "anfonwyd: "
+msgid "Install rpm"
+msgstr "Gosod rpm"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Local measure"
-msgstr "Mesur lleol"
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
+msgstr ""
+"I argraffu ffeil o'r linell orchymyn (ffenestr derfynnell) mae modd "
+"defnyddio un ai'r gorchymyn \"%s <file>\" neu offeryn argraffu graffigol: "
+"\"xpp <file>\" neu \"kprinter <file>\". Mae'r offeryn graffigol yn caniatĂĄu "
+"chi ddefnyddio'r argraffydd ac i newid gosodiadau dewis yn hawdd.\n"
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "average"
-msgstr "cyfartaledd"
+msgid "Time remaining "
+msgstr "Amser yn weddill"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Color configuration"
-msgstr "Ffurfweddiad lliw"
+msgid "UK keyboard"
+msgstr "Bysellfwrdd DG"
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
-"Methodd y cysylltiad.\n"
-"Gwiriwch eich ffurfweddiad yng Nghanolfan Rheoli Mandrake."
+msgid "Unmount"
+msgstr "Dad-osod"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Connection complete."
-msgstr "Cysylltiad wedi ei gwblhau"
+msgid "Uninstall Fonts"
+msgstr "Dad osod Ffontiau"
-#: ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Disconnection from the Internet complete."
-msgstr "Datgysylltwyd yn llwyr o'r Rhyngrwyd."
+msgid "Microsoft Explorer"
+msgstr "Microsoft Explorer"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Disconnection from the Internet failed."
-msgstr "Methodd datgysylltu o'r Rhyngrwyd."
+msgid "German (no dead keys)"
+msgstr "Almaenaidd (dim bysellau marw)"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Connecting to the Internet "
-msgstr "Cysylltu Ăą'r Rhyngrwyd"
+msgid "Transferring %s..."
+msgstr "Trosglwyddo %s..."
-#: ../../standalone/net_monitor:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Disconnecting from the Internet "
-msgstr "Datgysylltu o'r Rhyngrwyd"
+msgid "32 thousand colors (15 bits)"
+msgstr "32 mil o liwiau (15 did)"
-#: ../../standalone/net_monitor:1
+#: ../../any.pm:1
#, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Arhoswch, profi eich cysylltiad..."
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
+msgstr ""
+"Medrwch allforio gan ddefnyddio NFS neu Samba. Pa un hoffech chi ei "
+"ddefnyddio?"
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Logs"
-msgstr "Cofnodion"
+msgid "Reboot"
+msgstr "Ailgychwyn"
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connection Time: "
-msgstr "Amser Cysylltiad:"
+msgid "Gambia"
+msgstr "Gambia"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Receiving Speed:"
-msgstr "Derbyn Cyflymder"
+msgid "Mandrake Control Center"
+msgstr "Canolfan Rheoli Mandrake"
-#: ../../standalone/net_monitor:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Sending Speed:"
-msgstr "Cyflymder Anfon:"
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
+msgstr ""
+"Medrwch roi amrywiol byrth.\n"
+"Eng. dilys: 139/tcp 139/udp.\n"
+"Am wybodaeth ewch i /etc/services."
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid "Statistics"
-msgstr "Ystadegau"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
+msgstr ""
+"Dangosydd\n"
+"\n"
+" Mae'r gosodwr fel rheol yn canfod ac yn ffurfweddu'n awtomatig\n"
+"y dangosydd sy'n gysylltiedig Ăą'ch cyfrifiadur. Os nad yw hyn yn wir,\n"
+"dewiswch eich dangosydd."
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Profile "
-msgstr "Proffil"
+msgid "\t-Tape \n"
+msgstr "\t-TĂąp \n"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakhelp:1
#, c-format
-msgid "Network Monitoring"
-msgstr "Monitro'r Rhwydwaith"
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
+msgstr ""
+"Does dim porwr ar eich cyfrifiadur. Rhaid gosod un os ydych am archwilio'r "
+"system gymorth."
-#: ../../standalone/printerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Reading data of installed printers..."
-msgstr "Darllen data am argraffyddion gosodedig..."
+msgid "Remember this password"
+msgstr "Cofiwch y cyfrinair"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Name/IP address of host:"
-msgstr "Enw/cyfeiriad IP gwesteiwr"
+msgid "Internet Connection Sharing is now enabled."
+msgstr "Mae Rhannu Cysylltiad Ăą'r Rhyngrwyd wedi ei alluogi."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr "Mae'r gwesteiwr ar y rhestr yn barod, does dim modd ei ychwanegu.\n"
+msgid "\t-Network by SSH.\n"
+msgstr "\t-Rhwydwaith drwy SSH.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Scannerdrake"
-msgstr "Scannerdrake"
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
+msgstr ""
+"Os cafodd yr argraffydd ei awtoganfod, dewiswch ef o'r rhestr ac ychwanegu "
+"enw defnyddiwr, cyfrinair a/neu grwp gwaith yn ĂŽl yr angen."
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Rhowch enw'r gwesteiwr neu'r cyfeiriad IP.\n"
+msgid "Use the free space on the Windows partition"
+msgstr "Defnyddiwch y lle gwag ar raniad Windows"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
-msgstr "Dewis y gwesteiwr ddylai'r sganiwr lleol fod ar gael iddynt:"
+msgid "%s found on %s, configure it automatically?"
+msgstr "Wedi canfod %s ar %s, ei ffurfweddi'n awtomatig?"
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Sharing of local scanners"
-msgstr "Rhannu sganwyr lleol"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
+msgstr ""
+"Ymresymiadau: arg)\n"
+"\n"
+"Defnyddio cyfrinair i wirio defnyddiwr."
-#: ../../standalone/scannerdrake:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "This machine"
-msgstr "Y peiriant hwn"
+msgid "XFree86 driver: %s\n"
+msgstr "Gyrrwr XFree86: %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove selected host"
-msgstr "Tynnu'r gwesteiwr"
+msgid "This host/network is already in the list, it cannot be added again.\n"
+msgstr ""
+"Mae'r gwesteiwr/rhwydwaith ar y rhestr yn barod, does dim modd ei "
+"ychwanegu.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Edit selected host"
-msgstr "Golygu'r gwesteiwr"
+msgid ""
+"\n"
+" DrakBackup Report \n"
+"\n"
+msgstr ""
+"\n"
+" Adroddiad DrakBackup \n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add host"
-msgstr "Ychwanegu gwesteiwr"
+msgid "Choose the packages you want to install"
+msgstr "Dewiswch y pecynnau hoffech chi eu gosod"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr "Dyma'r cyfrifiaduron ddylai'r sganwyr fod ar gael:"
+msgid "Papua New Guinea"
+msgstr "Papua New Guinea"
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Usage of remote scanners"
-msgstr "Defnyddiwch o sganwyr pell"
+msgid "Serbian (cyrillic)"
+msgstr "Serbaidd (cyrilig)"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "All remote machines"
-msgstr "Pob cyfrifiadur pell"
+msgid "Make kernel message quiet by default"
+msgstr "Gwneud neges y cnewyllyn yn dawel drwy ragosodiad"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
msgstr ""
-"Dyma'r cyfrifiaduron a rhwydweithiau ddylai'r sganiwr lleol fod ar gael:"
+"Ydych chi am osod argraffydd (\"%s\")\n"
+"fel yr argraffydd rhagosodedig?"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Use the scanners on hosts: "
-msgstr "Defnyddio sganwyr ar westeiwyr:"
+msgid "The DHCP end range"
+msgstr "Amrediad terfyn DHCP"
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Use scanners on remote computers"
-msgstr "Defnyddio sganer ar gyfrifiaduron pell"
+msgid "Creating bootdisk..."
+msgstr "Creu disg cychwyn"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Rhannu sganwyr i westeiwyr:"
+msgid "Wait please, testing your connection..."
+msgstr "Arhoswch, profi eich cysylltiad..."
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr "Mae' sganwyr y cyfrifiadur hwn ar gael ar gyfer rhai eraill"
+msgid "Bringing down the network"
+msgstr "Cau'r rhwydwaith"
-#: ../../standalone/scannerdrake:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
-"Medrwch benderfynu a ddylai sganwyr ar gyfrifiadur pell fod ar gael ar gyfer "
-"y cyfrifiadur hwn."
+msgid "Login ID"
+msgstr "Dynodiad Mewngofnodi"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
msgstr ""
-"Yma medrwch benderfynu a ddylai'r sganwyr sy'n gysylltiedig Ăą'r cyfrifiadur "
-"hwn fod ar gael i gyfrifiaduron pell a pha rai."
+"Mae NFS yn brotocol poblogaidd ar gyfer rhannu ffeiliau \n"
+"ar draws rhwydweithiau TCP/IP. Mae'r gwasanaeth hwn \n"
+"yn darparu'r gallu i gloi ffeiliau NFS."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Re-generating list of configured scanners ..."
-msgstr "Ailgynhyrchu rhestr o sganwyr wedi eu ffurfweddu..."
+msgid "DHCP Client"
+msgstr "Cleient DHCP"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Searching for new scanners ..."
-msgstr "Chwilio am sganiwr newydd..."
+msgid "dismiss"
+msgstr "gwrthod"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for configured scanners ..."
-msgstr "Chwilio am sganiwr wedi ei ffurfweddu..."
+msgid "Printing/Scanning on \"%s\""
+msgstr "Argraffu/Sganio ar \"%s\""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Scanner sharing"
-msgstr "Rhannu sganiwr"
+msgid "omit raid modules"
+msgstr "peidio cynnwys modiwlau raid"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
-msgid "Add a scanner manually"
-msgstr "Ychwanegu sganiwr gyda llaw"
+msgid ""
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
+msgstr ""
+"Mae lpd yn ddaemon argraffu sy'n angenrheidiol i lpr weithio\n"
+"Mae'n wasanaethwr sy'n cyflafareddu gwaith argraffu i\n"
+"argraffydd (ion)."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Search for new scanners"
-msgstr "Chwilio am sganwyr newydd"
+msgid "Internet Connection Configuration"
+msgstr "Ffurfweddu Cysylltiad Ăą'r Rhyngrwyd"
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr "Does unrhyw sganiwr wedi ei ganfod ar gael ar eich cyfrifiadur.\n"
+msgid "comma separated numbers"
+msgstr "rhifau gwahanwyd gan gollnod"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
msgstr ""
-"Mae'r argraffydd canlynol\n"
-"\n"
-"%s\n"
-"ar gael ar eich system.\n"
+"Unwaith i chi ddewis dyfais, medrwch weld esboniad mewn meysydd yn y ffrĂąm "
+"dde [\"Gwybodaeth\"]"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule up one level"
+msgstr "Symud y rheol i fyny un lefel"
#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"The following scanners\n"
+"The following scanner\n"
"\n"
"%s\n"
-"are available on your system.\n"
+"is available on your system.\n"
msgstr ""
-"Mae argraffyddion canlynol\n"
+"Mae'r argraffydd canlynol\n"
"\n"
"%s\n"
"ar gael ar eich system.\n"
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"Mae eich %s wedi ei ffurfweddu.\n"
-"Medrwch ddefnyddio \"XSane\" i sganio dogfennau o'r ddewislen rhaglenni Aml-"
-"gyfrwng/Graffigau."
-
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "choose device"
-msgstr "dewis dyfais"
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "Ydych chi wir eisiau tynnu argraffydd \"%s\""
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr "Dewiswch y ddyfais lle mae %s wedi ei gysylltu"
+msgid "I can't find any room for installing"
+msgstr "Methu canfod lle ar gyfer gosod"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for scanners ..."
-msgstr "Chwilio am sganiwyr..."
+msgid "Default printer"
+msgstr "Argraffydd rhagosodedig"
-#: ../../standalone/scannerdrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Auto-detect available ports"
-msgstr "Awtoganfod pyrth ar gael"
+msgid ""
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
+msgstr ""
+"Rydych wedi ffurfweddu nifer o ffyrdd i gysylltu Ăą'r Rhyngrwyd.\n"
+"Dewiswch ba un rydych am ei ddefnyddio.\n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr "(Sylwer: Nid oes modd awtoganfod pyrth paralel)"
+msgid "Modify RAID"
+msgstr "Newid RAID"
-#: ../../standalone/scannerdrake:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
msgstr ""
-"Rhaid i %s gael ei ffurfweddu gan printerdrake.\n"
-"Medrwch gychwyn printerdrake o adran Galedwedd Canolfan Rheoli Mandrake"
+"Rwyf wedi canfod cerdyn IDSN, ond nid wyf yn gwybod pa fath. Dewiswch un "
+"cerdyn PCI ar y sgrĂźn nesaf."
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "The %s is unsupported"
-msgstr "Nid yw %s yn cael ei gynnal"
+msgid "Add user"
+msgstr "Ychwanegu defnyddiwr"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr "Nid yw %s yn hysbys gan y fersiwn hwn o Scannerdrake."
+msgid "RAID-disks %s\n"
+msgstr "Disg RAID %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
-msgstr "Nid yw %s yn cael ei gynnal gan y fersiwn hwn o Mandrake Linux"
+msgid "Liberia"
+msgstr "Liberia"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Port: %s"
-msgstr "Porth: %s"
+msgid ""
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
+msgstr ""
+"Rhowch enw'r rhyngwyneb sy'n cysylltu Ăą'r rhyngrwyd.\n"
+"\n"
+"Enghreifftiau:\n"
+"\t\tppp+ cysylltiad modem neu DSL, \n"
+"\t\teth0, neu eth1 fam gysylltiad cebl, \n"
+"\t\tippp+ am gysylltiad idsn.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid ", "
-msgstr ", "
+msgid "Choose your keyboard"
+msgstr "Dewis eich bysellfwrdd"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Detected model: %s"
-msgstr "Canfyddwyd model: %s"
+msgid "Format partitions"
+msgstr "Fformatio rhaniadau"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " ("
-msgstr " ("
+msgid "Automatic correction of CUPS configuration"
+msgstr "Cywiro cyswllt CUPS yn awtomatig"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Select a scanner model"
-msgstr "Dewiswch model sganiwr"
+msgid "Running \"%s\" ..."
+msgstr "Rhedeg \"%s\"..."
-#: ../../standalone/scannerdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr ""
-"Nid yw %s yng nghronfa ddata sganwyr. Hoffech chi ei ffurfweddu Ăą llaw?"
+msgid "enable radio support"
+msgstr "galluogi cynnal radio"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "Wedi canfod %s ar %s, ei ffurfweddi'n awtomatig?"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Hardware probing in progress"
-msgstr "Canfod caledwedd ar waith"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices were added:\n"
-msgstr "Cafodd rhai dyfeisiau eu hychwanegu:\n"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "Cafodd rhai dyfeisiau yn nosbarth caledwedd\"%s\" eu tynnu:\n"
+msgid "Scanner sharing to hosts: "
+msgstr "Rhannu sganwyr i westeiwyr:"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
-msgstr ""
-"Mae llwyddiant MandrakeSoft yn seiliedig ar egwyddor Meddalwedd Rhydd. Mae "
-"eich system weithredu newydd yn ganlyniad gwaith cydweithredol ar ran y "
-"Gymuned Linux byd-eang"
+msgid "Loopback file name: %s"
+msgstr "Enw ffeil cylch-ĂŽl: %s"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Welcome to the Open Source world."
-msgstr "Croeso i fyd Cod Agored"
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "Dewiswch yr argraffydd i drin y gwaith argraffu."
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr "Diolch am ddewis Mandrake Linux 9.1"
+msgid "Do not transfer printers"
+msgstr "Peidio trosglwyddo argraffydd"
-#: ../../share/advertising/02-community.pl:1
-#, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
-msgstr ""
-"Dewch i adnabod y gymuned Cod Agored a dewch yn aelod. Dysgwch, addysgwch a "
-"chynorthwywch eraill drwy ymuno yn y grwpiau trafod niferus sydd i'w cael yn "
-"ein tudalennau gwe \"Cymuned\""
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Delay before booting the default image"
+msgstr "Oedi cyn cychwyn y ddelwedd rhagosodedig"
-#: ../../share/advertising/02-community.pl:1
-#, c-format
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+" DUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
msgstr ""
-"Hoffech chi wybod mwy am y gymuned Cod Agored? Ymunwch Ăą byd Meddalwedd "
-"Rhydd!"
-
-#: ../../share/advertising/02-community.pl:1
-#, c-format
-msgid "Build the future of Linux!"
-msgstr "Adeiladu dyfodol Linux!"
+"\n"
+" Hawlfraint (C) 2001-2002 MandrakeSoft \n"
+"\tDUPONT Sebastien sdupont(fersiwn wreiddiol)\n"
+" CHAUMETTE Damien<dchaumette\\@mandrakesoft.com\n"
+"\n"
+"Mae'r rhaglen hon yn feddalwedd rhydd; medrwch ei ailddosbarthu\n"
+"a/neu ei newid o dan amodau Trwydded Gyhoeddus Gyffredinol GNU\n"
+"fel sydd wedi ei gyhoeddi gan y Free Software Foundation; un ai fersiwn\n"
+"2 neu (yn ĂŽl eich dewis) unrhyw fersiwn diweddarach.\n"
+"\n"
+" Mae'r rhaglen yn cael ei ddosbarthu yn y gobaith y bydd yn ddefnyddiol,\n"
+" ond HEB UNRHYW WARANT; heb hyd yn oed awgrym o warant o\n"
+" FASNACHEIDDRWYDD nag ADDASRWYDD AR GYFER PWRPAS\n"
+" PENODOL. Gweler Trwydded Gyhoeddus Gyffredinol GNU am fwy o\n"
+" wybodaeth.\n"
+"\n"
+" Dylech fod wedi derbyn copi o Drwydded Gyhoeddus Gyffredinol GNU\n"
+" gyda'r rhaglen; os nad, ysgrifennwch at:\n"
+" Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,\n"
+"MA 02111-1307, USA\n"
+" Diolch:\n"
+" - pfm2afm: \n"
+"\t gan Ken Borgendale:\n"
+"\t Trosi ffeil .pfm Windows i .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t bganJames Macnicol: \n"
+"\t type1inst cynhyrchu files fonts.dir fonts.scale a Fontmap.\n"
+" - ttf2pt1: \n"
+"\t gan Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Trosi ffeiliau ffont i ffontiau afm pfb\n"
+"\n"
+"\n"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
-msgstr ""
-"Mae Mandrake Linux 9.1 yn caniatĂĄu i chi ddefnyddio'r feddalwedd ddiweddaraf "
-"i chwarae ffeiliau cerddoriaeth a sain, golygu a threfnu eich delweddau, "
-"lluniau a fideo."
+msgid "Please check for multisession CD"
+msgstr "Gwiriwch os ydych yn defnyddio CD amlsesiwn"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
-msgstr ""
-"Syrffio'r We gyda Gwe-lywiwr Mozilla neu Konqueror, darllen eich e-bost "
-"gydag Evolution neu Kmail, creu eich dogfennau gydag OpenOffice.org"
+msgid "user"
+msgstr "defnyddiwr"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr "Mae Mandrake Linux wedi dewis y feddalwedd orau ar eich cyfer"
+msgid "Use Hard Disk to backup"
+msgstr "Defnyddiwch y Ddisg Caled ar gyfer cadw wrth gefn"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
-"Mae Mandrake Linux 9.1 yn cynnig Canolfan Rheoli Mandrake, offeryn pwerus i "
-"addasu eich cyfrifiadur i'ch defnydd personol chi. Gallwch addasu elfennau "
-"megis lefelau diogelwch, offer ymylol (sgrĂźn, llygoden, bysellfwrdd...), "
-"cysylltiad Ăą'r Rhyngrwyd a llawer mwy!"
+msgid "Configure"
+msgstr "Ffurfweddu"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "Offeryn ffurfweddiad amlbwrpas Mandrake"
+msgid "Scannerdrake"
+msgstr "Scannerdrake"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"Gwnewch y cyfrifiadur yn addas i'ch anghenion diolch i'r 11 rhyngwyneb "
-"defnyddiwr Mandrake Linux y mae modd eu newid yn helaeth: KDE 3.1, Gnome "
-"2.2, WindowMaker, ..."
+"Rhybudd, mae cysylltiad arall gyda'r rhyngrwyd wedi ei ganfod, efallai'n "
+"defnyddio eich rhwydwaith."
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A customizable environment"
-msgstr "Mae modd addasu eich byd..."
+msgid "Backup Users"
+msgstr "Defnyddwyr Cadw wrth Gwfn"
-#: ../../share/advertising/06-development.pl:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
msgstr ""
-"Dyw newid a chreu mewn ieithoedd gwahanol megis Perl, Python, C and C++ "
-"erioed wedi bod mor hawdd diolch i GNU gcc 3 neu'r amgylcheddau datblygiadol "
-"Cod Agored gorau."
-
-#: ../../share/advertising/06-development.pl:1
-#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr "Mandrake Linux 9.1 yw'r platfform datblygu gorau"
+"Rhowch eich enw gwesteiwr.\n"
+"Dylai eich enw gwesteiwr fod yn enw gwesteiwr llawn gymwys.\n"
+"megis \"fymlwch.fynesg.fyngho.com\".\n"
+"Medrwch hefyd gynnig eich cyfeiriad IP os oes gennych un"
-#: ../../share/advertising/07-server.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
-msgstr ""
-"Trowch eich peiriant i fod yn wasanaethwr pwerus gydag ychydig gliciau ar "
-"eich llygoden: gwasanaethwyr gwe, e-bost, mur gwarchod, llwybrydd, "
-"gwasanaethwr ffeil ac argraffu..."
+msgid "Select Printer Spooler"
+msgstr "Dewiswch Sbwlydd Argraffydd"
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Turn your computer into a reliable server"
-msgstr "Trowch eich peiriant i fod yn wasanaethwr dibynadwy"
+msgid "Create new theme"
+msgstr "Creu thema newydd"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
-msgstr ""
-"Mae amrediad eang o ddarpariaeth Linux, yn ogystal Ăą chynigion arbennig ar "
-"gynnyrch a 'difyrrwch', ar gael ar-lein yn ein e-siop"
+msgid "Mandrake Tools Explanation"
+msgstr "Esboniadau Offer Mandrake"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "The official MandrakeSoft Store"
-msgstr "Y siop MandrakeSoft swyddogol"
+msgid "No image found"
+msgstr "Heb ganfod delwedd"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
msgstr ""
-"Cewch well perfformiad eich cyfrifiadur gyda chymorth dewis o gwmniau sy'n "
-"cynnig atebion proffesiynnol sy'n cydweddu Ăą Mandrake Linux "
+"Methodd rhai pecynnau pwysig a chael eu gosod yn gywir.\n"
+"Un ai mae eich gyrrwr CD-ROM neu eich CD-ROM yn wallus.\n"
+"Gwiriwch y CD-ROM ar gyfrifiadur wedi ei osod gan ddefnyddio \"rpm -qpl "
+"Mandrake/RPMS/*.rpm\"\n"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
-msgstr "Estynnwch yr eitemau gorau gan bartneriaid strategol Mandrake Linux"
+msgid "Detected model: %s"
+msgstr "Canfyddwyd model: %s"
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakedm:1
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
-"Mae gan Mandrake Linux offer wedi eu cynllunio i greu'r fersiwn mwyaf diogel "
-"o Linux erioed: Draksec, system o offer rheoli diogelwch, a mur cadarn iawn "
-"wedi eu cyplysu i leihau'r posibilrwydd o hacio."
+"Mae'r Rheolwr Arddangos X11 yn caniatĂĄu i chi fewngofnodi\n"
+"i'ch system yn raffigol gyda'r X Windows System yn rhedeg. Mae'n cynnal\n"
+"rhedeg amryw o sesiynau X ar eich cyfrifiadur ar yr un pryd."
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Optimize your security by using Mandrake Linux"
-msgstr "Y diogelwch mwyaf"
+msgid "if set to yes, run the daily security checks."
+msgstr "os wedi ei osod i iawn, rhedeg y gwiriadau diogelwch dyddiol."
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr "Mae'r cynnyrch ar gael ar safle gwe MandrakeStore"
+msgid "Azerbaijan"
+msgstr "Azerbaijan"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
-msgstr ""
-"Cwblhewch eich gosodiad diogelwch gyda'r feddalwedd hawdd ei defnyddio sy'n "
-"cynnwys darnau o safon uchel megis mur cadarn, gwasanaethwr a chleient "
-"rwydwaith preifat rhithiol (VPN), system canfod ymyrraeth a rheolwr traffig."
+msgid "No tape in %s!"
+msgstr "Dim tĂąp yn %s!"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr "Gwnewch eich rhwydwaith yn ddiogel gyda'r Multi Network Firewall"
+msgid "Dvorak (US)"
+msgstr "Dvorak (UDA)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""
-"Ymunwch Ăą'r timau cefnogi MandrakeSoft a'r Linux Community ar-lein i rannu "
-"eich gwybodaeth ac i helpu eraill drwy ddod yn Arbenigwr cydnabyddedig ar y "
-"safle cefnogaeth dechnegol."
+"dyma'r bws corfforol i'r ddyfais gael ei gysylltu iddo(e.e. PCI, USB,...)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr ""
-"Dewch o hyd i ateb eich anhawsterau drwy blatfform cefnogaeth ar-lein "
-"MandrakeSoft."
+msgid "How is the printer connected?"
+msgstr "Sut mae'r argraffydd wedi ei gysylltu?"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Become a MandrakeExpert"
-msgstr "Dewch yn MandrakeExpert"
+msgid "Security level"
+msgstr "Lefel diogelwch"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr ""
-"Bydd pob digwyddiad yn cael ei archwilio gan arbenigwr technegol "
-"MandrakeSoft cymwysedig"
+msgid "final resolution"
+msgstr "cydraniad terfynnol"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr "Platfform arlein i ymateb i anghenion cefnogaeth penodol cwmni"
+msgid "Services"
+msgstr "Gwasanaethau"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "MandrakeExpert Corfforaethol"
+msgid "4 MB"
+msgstr "4 MB"
#: ../../share/compssUsers:999
msgid "Office Workstation"
@@ -19565,10 +19603,6 @@ msgstr ""
"gnumeric), darllennydd pdf, ag ati"
#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Man Gwaith"
-
-#: ../../share/compssUsers:999
msgid "Game station"
msgstr "Man chwarae"
@@ -19641,10 +19675,6 @@ msgstr ""
"o offer"
#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Amgylchedd Graffig"
-
-#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Man Gwaith Gnome"
@@ -19665,10 +19695,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm, ag ati"
#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Datblygiad"
-
-#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "Llyfrgelloedd datblygiadol C a C++, rhaglenni a ffeiliau cynnwys"
@@ -19738,29 +19764,92 @@ msgstr ""
"Gwasanaethwr NFS, gwasanaethwr SMB, gwasanaethwr dirprwyol, gwasanaethwr ssh"
#: ../../share/compssUsers:999
-msgid "Audio station"
-msgstr "Gorfsaf Sain"
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr "Casgliad o offer i ddarllen ac anfon e-bost a newyddion ac i bori'r We"
-#: ../../share/compssUsers:999
-msgid "Sound playing/editing programs"
-msgstr "Chwarae sain/rhaglenni golygu"
+#~ msgid "Internet connection & configuration"
+#~ msgstr "Cysylltiad Ăą'r rhyngrwyd a'i ffurfweddiad "
-#: ../../share/compssUsers:999
-msgid "Video station"
-msgstr "Gorsaf fideo"
+#~ msgid "Configure the connection"
+#~ msgstr "Ffurfweddu'r gysylltiad"
-#: ../../share/compssUsers:999
-msgid "Video playing programs"
-msgstr "Rhaglenni fideo"
+#~ msgid "Disconnect"
+#~ msgstr "Dadgysylltu"
-#: ../../share/compssUsers:999
-msgid "Graphic station"
-msgstr "Gorsaf graffeg"
+#~ msgid "Connect"
+#~ msgstr "Cysylltu"
-#: ../../share/compssUsers:999
-msgid "Graphics programs"
-msgstr "Rhaglenni graffeg"
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Medrwch ailffurfweddu eich cysylltiad"
-#: ../../share/compssUsers:999
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr "Casgliad o offer i ddarllen ac anfon e-bost a newyddion ac i bori'r We"
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Medrwch gysylltu Ăą'r Rhyngrwyd neu ailffurfweddu eich cyswllt"
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "Nid ydych wedi eich cysylltu Ăą'r Rhyngrwyd."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can disconnect or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Medrwch ddatgysylltu neu ailffurfweddu eich cyswllt"
+
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "Rydych wedi eich cysylltu Ăą'r Rhyngrwyd."
+
+#~ msgid "files sending by FTP"
+#~ msgstr "anfon ffeil drwy FTP"
+
+#~ msgid "Use incremental backup (do not replace old backups)"
+#~ msgstr "Cadw wrth gefn cynyddol (peidio disodli hen ffeiliau wrth gefn)"
+
+#~ msgid "Relaunch 'lilo'"
+#~ msgstr "Ail gychwyh 'lilo'"
+
+#~ msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+#~ msgstr "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+
+#~ msgid "Write %s"
+#~ msgstr "Ysgrifennu %s"
+
+#~ msgid "Copy %s to %s"
+#~ msgstr "CopĂŻo %s i %s"
+
+#~ msgid "Backup %s to %s.old"
+#~ msgstr "Cadw %s i %s.old wrth gefn"
+
+#~ msgid "ttf fonts conversion"
+#~ msgstr "trosi ffontiau ttf "
+
+#~ msgid "Fonts conversion"
+#~ msgstr "Trosiad ffontiau"
+
+#~ msgid "Author:"
+#~ msgstr "Awdur"
+
+#~ msgid "Audio station"
+#~ msgstr "Gorfsaf Sain"
+
+#~ msgid "Sound playing/editing programs"
+#~ msgstr "Chwarae sain/rhaglenni golygu"
+
+#~ msgid "Video station"
+#~ msgstr "Gorsaf fideo"
+
+#~ msgid "Video playing programs"
+#~ msgstr "Rhaglenni fideo"
+
+#~ msgid "Graphic station"
+#~ msgstr "Gorsaf graffeg"
+
+#~ msgid "Graphics programs"
+#~ msgstr "Rhaglenni graffeg"
diff --git a/perl-install/share/po/da.po b/perl-install/share/po/da.po
index adb712328..8048b716a 100644
--- a/perl-install/share/po/da.po
+++ b/perl-install/share/po/da.po
@@ -1,978 +1,1898 @@
+# translation of da.po to Danish
# danish DrakX
-# Copyright (C) 2000 Free Software Foundation, Inc.
-# Keld Simonsen <keld@dkuug.dk>, 2000-2003.
+# Copyright (C) 2000,2003 Free Software Foundation, Inc.
# Troels Liebe Bentsen <tlb@iname.com> 2000.
#
# Reviewed: keld@dkuug.dk 2001-08-22
+# Keld Simonsen <keld@dkuug.dk>, 2000-2003.
#
msgid ""
msgstr ""
-"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
-"PO-Revision-Date: 2003-03-31 00:29+0200\n"
+"Project-Id-Version: da\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
+"PO-Revision-Date: 2003-05-15 03:58+0200\n"
"Last-Translator: Keld Simonsen <keld@dkuug.dk>\n"
"Language-Team: Danish <dansk@klid.dk>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=ISO-8859-1\n"
"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.0.1\n"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Scanning partitions to find mount points"
+msgstr "Skanner partitioner for at finde monteringspunkter"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of suid root files."
+msgstr "hvis sat til ja, sć tjek tilfűjelser og fjernelser af suid root-filer."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t\tErase=%s"
+msgstr "\t\tErase=%s"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "network printer port"
+msgstr "port for netværksprinter"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Please insert floppy disk:"
+msgstr "Indsæt diskette:"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "PCMCIA"
+msgstr "PCMCIA"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
+"The backup partition table has not the same size\n"
+"Still continue?"
msgstr ""
-"Deling per bruger bruger gruppen 'fileshare'. \n"
-"Du kan bruge userdrake til at tilfűje en bruger til denne gruppe."
+"Kopien af partitionstabellen har ikke samme stűrrelse\n"
+"Fortsæt alligevel?"
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Cancel"
-msgstr "Annullér"
+msgid "Which username"
+msgstr "Hvilket brugernavn"
#: ../../any.pm:1
#, c-format
-msgid "Launch userdrake"
-msgstr "Start userdrake"
+msgid "Which type of entry do you want to add?"
+msgstr "Hvilken type űnsker du at tilfűje"
-#: ../../any.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Restore partition table"
+msgstr "Genskaber partitionstabel"
+
+#: ../../printer/cups.pm:1
+#, c-format
+msgid "On CUPS server \"%s\""
+msgstr "Pć CUPS-server '%s'"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Post-install configuration"
+msgstr "Konfiguration efter installation"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``%s'' instead"
+msgstr "Benyt ``%s'' i stedet"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Type"
+msgstr "Type"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
"\n"
-"\"Custom\" permit a per-user granularity.\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
msgstr ""
-"Űnsker du at tillade brugere at eksportere nogle kataloger i deres "
-"hjemmekatalog?\n"
-"Tilladelse af dette vil sætte brugere i stand til simpelthen at klikke pć "
-"'Fildeling' i konqueror og nautilus.\n"
+"\n"
+"Printere konfigureret med PPD-filerne, som producenten har lavet, eller med "
+"CUPS egne drivere kan heller ikke overflyttes."
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Krævet pakke %s mangler"
+msgid "Sri Lanka"
+msgstr "Sri Lanka"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
-msgstr "Du kan eksportere med NFS eller Samba. Hvilken vil du bruge"
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr ""
+"De fűlgende printere\n"
+"\n"
+"%s%s\n"
+"er direkte tilsluttet til dit system"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Pakken %s skal være installeret. Űnsker du at installere den?"
+msgid "Central African Republic"
+msgstr "Centralafrikanske Republik"
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Custom"
-msgstr "Tilpasset"
+msgid "Gateway device"
+msgstr "Gateway enhed"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Allow all users"
-msgstr "Tillad alle brugere"
+msgid "Net Method:"
+msgstr "Netmetode:"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "No sharing"
-msgstr "Ingen fildeling"
+msgid "Ethernetcard"
+msgstr "Ethernet-kort"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "More"
-msgstr "Mere"
+msgid "Parameters"
+msgstr "Parametre"
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Here is the full list of available countries"
-msgstr "Her er den komplette liste over tilgængelige lande"
+msgid "Auto-detect"
+msgstr "Automatisk detektion"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please choose your country."
-msgstr "Vælg dit land."
+msgid "Interface:"
+msgstr "Grænseflade:"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid " / Region"
-msgstr " / Region"
+msgid "Select installation class"
+msgstr "Vælg installations-metode"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Country"
-msgstr "Land"
+msgid "on CDROM"
+msgstr "pć cd-rom"
-#: ../../any.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "All languages"
-msgstr "Alle sprog"
+msgid ""
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
+msgstr ""
+"Det lader ikke til at dit system har forbindelse til Internettet.\n"
+"Prűv at omkonfigurere din forbindelse."
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use Unicode by default"
-msgstr "Brug ISO 10646 som standard"
+msgid ""
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
+msgstr ""
+"Forbind din printer til en Linux-server og lad dine Windows-maskiner "
+"tilslutte sig til den som klienter.\n"
+"\n"
+"Űnsker du virkelig at fortsætte med at opsætte din printer som du gűr nu?"
-#: ../../any.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Belarus"
+msgstr "Hviderusland"
+
+#: ../../partition_table.pm:1
+#, c-format
+msgid "Error writing to file %s"
+msgstr "Fejl ved skrivning til fil %s"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
msgstr ""
-"Du kan vælge andre sprog der vil være tilgængelige efter installationen"
+"apmd bruges til at overvćge batteristatus og skrive log til syslog.\n"
+"Den kan ogsć bruges til at lukke maskinen nćr batteriet er pć lav."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose a language to use."
-msgstr "Vælg det sprog, der skal bruges."
+msgid "Use tape to backup"
+msgstr "brug bćnd til sikkerhedskopieringen"
-#: ../../any.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Choose the window manager to run:"
-msgstr "Vælg den vindueshćndtering du űnsker at benytte:"
+msgid "The following packages are going to be installed"
+msgstr "De fűlgende pakker vil blive installeret"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the default user:"
-msgstr "Vælg den forvalgte bruger:"
+msgid "CUPS configuration"
+msgstr "CUPS-konfiguration"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to use this feature?"
-msgstr "Űnsker du at bruge denne facilitet?"
+msgid "Hong Kong"
+msgstr "Hong Kong"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "I can set up your computer to automatically log on one user."
+msgid "Not enough free space to allocate new partitions"
+msgstr "Ikke nok fri plads til at tildele nye partitioner"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving"
+msgstr "Flytter"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
msgstr ""
-"Jeg kan sætte din maskine op til automatisk at logge en bestemt bruger pć."
+"\n"
+"Drakbackup aktiviteter via %s:\n"
+"\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Autologin"
-msgstr "Autologin"
+msgid "("
+msgstr "("
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Icon"
-msgstr "Ikon"
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgstr ""
+"Velkommen til Netværkskonfigurations-vejlederen\n"
+"\n"
+"Vi skal til at konfigurere din internet- eller netværksforbindelse.\n"
+"Hvis du ikke űnsker at bruge autodetektering, sć fravælg afkrydsningsboksen\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "Shell"
-msgstr "Skal"
+msgid ")"
+msgstr ")"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Password (again)"
-msgstr "Adgangskode (igen)"
+msgid "Lebanon"
+msgstr "Libanon"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Password"
-msgstr "Adgangskode"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "User name"
-msgstr "Brugernavn"
+msgid "Stop"
+msgstr "Stop"
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Real name"
-msgstr "Rigtige navn"
+msgid "Edit selected host"
+msgstr "Redigér valgte vært"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Accept user"
-msgstr "Acceptér bruger"
+msgid "No CD device defined!"
+msgstr "Ingen cd-enhed defineret!"
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Done"
-msgstr "Færdig"
+msgid "Bulgarian (phonetic)"
+msgstr "Bulgarsk (fonetisk)"
+
+#: ../../standalone/drakpxe:1
+#, c-format
+msgid "The DHCP start ip"
+msgstr "Begyndelses-ip pć DHCP"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "256 kB"
+msgstr "256 kb"
#: ../../any.pm:1
#, c-format
+msgid "Bootloader main options"
+msgstr "Systemopstarterens hovedindstillinger"
+
+#: ../../standalone.pm:1
+#, c-format
msgid ""
-"Enter a user\n"
-"%s"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
msgstr ""
-"Indtast en bruger\n"
-"%s"
+"[--manual] [--device=enhed] [--update-sane=sane_kilde_kat] [--update-"
+"usbtable] [--dynamic=enhed]"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Add user"
-msgstr "Tilfűj bruger"
+msgid "Tape"
+msgstr "Bćnd"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This user name has already been added"
-msgstr "Dette brugernavn eksisterer allerede"
+msgid "Scanning network..."
+msgstr "Skanner netværk ..."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The user name is too long"
-msgstr "Dette brugernavn er for langt"
+msgid ""
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
+msgstr ""
+"Med denne valgmulighed vil du være i stand til at kunne genskabe\n"
+"enhver version af dit /etc katalog."
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Brugernavnet mć kun indeholde smć bogstaver, tal, `-' og `_'"
+msgid "Malaysia"
+msgstr "Malaysia"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please give a user name"
-msgstr "Indtast et brugernavn"
+msgid "Swiss (French layout)"
+msgstr "Schweizisk (Fransk layout)"
-#: ../../any.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "This password is too simple"
-msgstr "Adgangskoden er for simpel"
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "mkraid fejlede (mćske mangler raidtools?)"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Webcam"
+msgstr "Webcam"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "size of the (second level) cpu cache"
+msgstr "Stűrrelse pć (andet niveau) cpu-mellemlagret"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Soundcard"
+msgstr "Lydkort"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
+msgstr ""
+"For at udskrive en fil fra kommandolinjen (terminalvinduet) brug da "
+"kommandoen '%s <fil>'.\n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please try again"
-msgstr "Prűv igen"
+msgid "Level %s\n"
+msgstr "Niveau %s\n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The passwords do not match"
-msgstr "Adgangskoderne stemmer ikke overens"
+msgid "Luxembourg"
+msgstr "Luxemburg"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "(already added %s)"
-msgstr "(har allerede tilfűjet %s)"
+msgid ""
+"\n"
+" DrakBackup Daemon Report\n"
+"\n"
+"\n"
+msgstr ""
+"\n"
+" DrakBackup Dæmon-Rapport\n"
+"\n"
+"\n"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to compilation tools"
-msgstr "adgang til oversættelsesværktűjer"
+msgid "Iran"
+msgstr "Iran"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "access to network tools"
-msgstr "adgang til netværksværktűjer"
+msgid "Bus"
+msgstr "Bus"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to administrative files"
-msgstr "adgang til administrative filer"
+msgid "Iraq"
+msgstr "Irak"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "allow \"su\""
-msgstr "tillad \"su\""
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr "Mulig LAN-adresse konflikt fundet i konfigurationen til %s!\n"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "access to rpm tools"
-msgstr "adgang til rpm-værktűjer"
+msgid "Configuring..."
+msgstr "Konfigurerer..."
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "access to X programs"
-msgstr "adgang til X-programmer"
+msgid "The setup has already been done, and it's currently enabled."
+msgstr "Indstilling er allerede gjort. og er for nærværende aktiv."
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
msgstr ""
-"Her er fűlgende typer indgange.\n"
-"Du kan tilfűje flere eller ændre de eksisterende."
+"For de fleste moderne tv-kort vil bttv-modulet fra GNU/Linux-kernen blot "
+"automatisk finde de rette parametre.\n"
+"Hvis dit kort ikke findes korrekt, kan du gennemtvinge den rette tuner og "
+"korttyper her. Bare vælg dit tv-korts parametre om nűdvendigt"
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Other OS (windows...)"
-msgstr "Andet styresystem (Windows...)"
+msgid "Password (again)"
+msgstr "Adgangskode (igen)"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Andet styresystem (MacOS...)"
+msgid "Search installed fonts"
+msgstr "Sűg efter installerede skrifttyper"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Andet styresystem (SunOS...)"
+msgid "Venezuela"
+msgstr "Venezuela"
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Linux"
-msgstr "Linux"
+msgid "IP address"
+msgstr "IP-adresse"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Hvilken type űnsker du at tilfűje"
+msgid "Choose the sizes"
+msgstr "Vælg stűrrelserne"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This label is already used"
-msgstr "Denne mærkat er allerede brugt"
+msgid ""
+"List of data corrupted:\n"
+"\n"
+msgstr ""
+"Liste over data der er űdelagt:\n"
+"\n"
-#: ../../any.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "You must specify a root partition"
-msgstr "Du skal angive en root-partition"
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
+msgstr ""
+"Dit modem ier ikke understűttet af systemet.\n"
+"Tag og kig pć http://www.linmodems.org"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You must specify a kernel image"
-msgstr "Du skal angive en kerne-fil"
+msgid "Choose another partition"
+msgstr "Vælg en ny partition"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Empty label not allowed"
-msgstr "Tom mærkat er ikke tilladt"
+msgid "Current user"
+msgstr "Aktuelle bruger"
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Default"
-msgstr "Forvalgt"
+msgid "Username"
+msgstr "Brugernavn"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "NoVideo"
-msgstr "Ingen video"
+msgid "Left \"Windows\" key"
+msgstr "Venstre Windows-tast"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Initrd-size"
-msgstr "Initrd-stűrrelse"
+msgid "dhcpd Server Configuration"
+msgstr "Konfiguration af dhcp-server"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Append"
-msgstr "Vedhæft"
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
+msgstr ""
+"Brugt til katalog:\n"
+" kun ejeren af kataloget eller filen i dette katalog kan slette den"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Label"
-msgstr "Mærkat"
+msgid "Guyana"
+msgstr "Guyana"
-#: ../../any.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Unsafe"
-msgstr "Usikker"
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr " pć Novell-server \"%s\", printer \"%s\""
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Table"
-msgstr "Tabel"
+msgid "Remove a module"
+msgstr "Fjern et modul"
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Root"
-msgstr "Rod"
+msgid "Password"
+msgstr "Adgangskode"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Read-write"
-msgstr "Læs-skriv"
+msgid ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
+msgstr ""
+"Argumenter: (max, inaktiv=-1)\n"
+"\n"
+"Sæt adgangskodeforældelse til \\fImax\\fP dage og forsinkelse med ændring "
+"til til \\fIinaktiv\\fP."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid "Advanced Configuration"
+msgstr "Avanceret konfiguration"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Video mode"
-msgstr "Videoindstilling"
+msgid "Scanning on your HP multi-function device"
+msgstr "Skanning pć din HP-multifunktionsenhed"
#: ../../any.pm:1
#, c-format
-msgid "Image"
-msgstr "Billede"
+msgid "Root"
+msgstr "Rod"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Default OS?"
-msgstr "Forvalgt styresystem?"
+msgid "Choose an existing RAID to add to"
+msgstr "Vælg en eksisterende RAID som skal udvides"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Enable OF Boot?"
-msgstr "Skal det være muligt at starte fra OF?"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "Tyrkisk (moderne \"Q\" model)"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Enable CD Boot?"
-msgstr "Skal det være muligt at starte fra CD?"
+msgid "Lilo message not found"
+msgstr "Lilo-besked ikke fundet"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Ventetid fűr kerneopstart"
+msgid ""
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
+msgstr ""
+"Automatisk regenerering af kernehoved i /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Open Firmware Delay"
-msgstr "Ćben firmwareforsinkelse"
+msgid "if needed"
+msgstr "hvis nűdvendigt"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Boot device"
-msgstr "Opstartsenhed"
+msgid "Restore Failed..."
+msgstr "Genskabelse mislykkedes..."
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Init Message"
-msgstr "Init-besked"
+msgid "/Autodetect _jazz drives"
+msgstr "/Autodetektér _jazz-drev"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bootloader to use"
-msgstr "Systemopstarter der skal bruges"
+msgid ""
+"Description:\n"
+"\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
+"\n"
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
+"\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
+"\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
+"\n"
+"\n"
+msgstr ""
+"Beskrivelse:\n"
+"\n"
+" Drakbackup bruges til at lave sikkehedskopier af dit system.\n"
+" I konfigurationen kan du vælge: \n"
+"\t- Systemfiler, \n"
+"\t- Brugeres filer, \n"
+"\t- Andre filer.\n"
+"\teller Hele dit system ... eller Andet (sćsom Windows partitioner)\n"
+"\n"
+" Drakbackup lader dig tage sikkerhedskopier af dit system pć:\n"
+"\t- Ddisk.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (med autoboot, redning og autoinstallering.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Bćnd.\n"
+"\n"
+" Drakbackup lader dig genskabe dit system pć\n"
+" et katalog valgt af brugeren.\n"
+"\n"
+" Som standard vil alle sikkerhedskopier blive lagret i dit\n"
+" /var/lib/drakbackup katalog\n"
+"\n"
+" Konfigurationsfil:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Genskabelsestrin:\n"
+" \n"
+" I genskabelsestrinnet vil Drakbackup fjerne dit nuværende katalog \n"
+" og kontrollere at alle dine backupfiler ikke er űdelagte. Det \n"
+" anbefales at du laver en sidste sikkerhedskopiering fűr genskabelse.\n"
+" \n"
+"\n"
-#: ../../any.pm:1
+# Mangler
+#: ../../install_messages.pm:1
#, c-format
-msgid "Bootloader main options"
-msgstr "Systemopstarterens hovedindstillinger"
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
+msgstr ""
+"Introduktion\n"
+"\n"
+"Operativsystemet og de forskellige komponenter tilgængelige i Mandrake Linux "
+"distributionen vil herefter blive kaldt \"programmelprodukter\". "
+"Programmelprodukterne inkluderer, men er ikke begrænset til: samlingen af "
+"værktűjer, metoder, regler og dokumentation relateret til operativsystemet "
+"og de forskellige komponenter i Mandrake Linux-distributionen.\n"
+"\n"
+"\n"
+"1. Licensaftale\n"
+"\n"
+"Læs venligst dette dokument omhyggeligt. Dette dokument er en licensaftale "
+"mellem dig og MandrakeSoft S.A., som gælder til disse programmelprodukter. "
+"Ved at installere, kopiere eller bruge disse programmelprodukter accepterer "
+"du udtrykkeligt og fuldt ud denne licensaftale med dens betingelser og "
+"regler. Hvis du er uenig i nogensomhelst del af denne licens, mister du "
+"retten til at installere, kopiere eller bruge disse programmelprodukter. "
+"Hvilket som helst forsűg pć at installere, kopiere eller bruge disse "
+"programmelprodukter pć en mćde som ikke er i overensstemmelse med "
+"betingelserne og reglerne i denne licens er ulovlig og vil betyde at du "
+"mister dine rettighedder under denne licens. Hvis dette sker, skal du med "
+"det samme űdelægge alle kopier af disse programmelprodukter.\n"
+"\n"
+"\n"
+"2. Begrænset garanti\n"
+"\n"
+"Programmelprodukterne og tilhűrende dokumenter leveres \"som de er\", uden "
+"nogen form for garanti, i den udstrækning lov tillader. MandrakeSoft S.A. "
+"vil under ingen omstændigheder undtagen hvad lov foreskriver være ansvarlig "
+"for specielle, tilfældige, direkte eller indirekte tab af nogen art "
+"(inkluderende uden begrænsninger, skader ved tab af forretning, "
+"forstyrrelser af forretning, finansielle tab, advokatbistand, erstatninger "
+"som resultat af en retssag eller nogen anden form for fűlgetab) opstćet "
+"under brugen eller mangel pć samme af disse programmelprodukter, selv hvis "
+"MandrakeSoft S.A. er blevet gjort opmærksom pć muligheden for eller "
+"indtræffelsen af sćdanne skader.\n"
+"\n"
+"BEGRÆNSET ANSVAR MED HENSYN TIL REGLER OM BESIDDELSE ELLER BRUG AF FORBUDT "
+"PROGRAMMEL I VISSE LANDE\n"
+"\n"
+"I den udstrækning som loven tillader vil MandrakeSoft S.A. eller deres "
+"distributűrer under ingen omstændigheder være ansvarlig for specielle, "
+"tilfældige, direkte eller indirekte tab af nogen art (inklusive uden "
+"begrænsninger skader ved tab af forretning, forstyrrelser af forretning, "
+"finansielle tab, advokatbistand, erstatninger som resultat af en retssag "
+"eller nogen anden form for tab) opstćet ved besiddelse eller brug af "
+"programmelkomponenter eller opstćet ved hentning af programmelkomponenter "
+"fra et af Mandrake Linux webstederne som er forbudt eller begrænset i visse "
+"lande ved lokal lov. Dette begrænsede ansvar gælder, men er ikke begrænset "
+"til, de stærke krypteringskomponenter inkluderet i programmelprodukterne.\n"
+"\n"
+"\n"
+"3. GPL-licensen og relaterede licenser\n"
+"\n"
+"Dette programmel bestćr af komponenter lavet af forskellige personer eller "
+"enheder. De fleste af disse komponenter bliver reguleret efter vilkćrene og "
+"aftalerne i GNU General Public License, herefter kaldet \"GPL\", eller "
+"lignende licenser. De fleste af disse licenser tillader dig at bruge, "
+"kopiere, tilpasse eller redistribuere komponenterne, de dækker. Læs venligst "
+"vilkćrene og betingelserne i licensaftalen for hver komponent omhyggeligt "
+"fűr du bruger det. Alle spűrgsmćl angćende en komponent bedes adresseret til "
+"komponentens forfatter og ikke til MandrakeSoft. Programmerne udviklet af "
+"MandrakeSoft S.A. bliver reguleret efter GPL-licensen. Dokumentationen "
+"skrevet af MandrakeSoft S.A. bliver reguleret efter en specifik licens. "
+"Referér venligst til dokumentationen for yderligere detaljer.\n"
+"\n"
+"\n"
+"4. Intellektuelle rettigheder\n"
+"\n"
+"Alle rettigheder til komponenterne i programmelproduktet tilhűrer deres "
+"respektive forfattere, og er beskyttet af intellektuelle rettigheds- og "
+"ophavsretslove, gældende for programmel. MandrakeSoft S.A. forbeholder sine "
+"rettigheder til at ændre eller tilpasse programmelprodukterne, helt eller "
+"delvist, med alle midler og til alle formćl. \"Mandrake\", \"Mandrake Linux"
+"\" samt de tilhűrende logoer er varemærker for MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Styrende love\n"
+"\n"
+"Hvis dele af denne aftale bliver kendt ugyldig, ulovlig eller ubrugelig ved "
+"en domstolsafgűrelse, vil disse dele blive ekskluderet fra denne kontrakt. "
+"Du vil forblive bundet af de andre gældende dele af aftalen. Vilkćrene og "
+"aftalerne i denne licens er reguleret under fransk lov. Alle uenigheder "
+"vedrűrende vilkćrene i denne licens vil fortrinsvist blive lűst udenfor "
+"domstolene. Som en sidste udvej vil uenighederne blive hćndteret ved den "
+"rette domstol i Paris, Frankrig. Ved spűrgsmćl omkring dette dokument, "
+"kontakt venligst MandrakeSoft S.A. \n"
-#: ../../any.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
+"the progress bar x coordinate\n"
+"of its upper left corner"
msgstr ""
-"Indstillingen ``Begræns kommandolinie-indstillinger'' er intet værd uden\n"
-"en adgangskode"
+"x-koordinatet for forlűbsindikatorens\n"
+"űvre venstre hjűrne"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Give the ram size in MB"
-msgstr "Angiv RAM-stűrrelse i Mb"
+msgid "Current interface configuration"
+msgstr "Aktuelle grænsesnitskonfiguration"
-#: ../../any.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Enable multiple profiles"
-msgstr "Aktivér multiprofiler"
+msgid "LPD - Line Printer Daemon"
+msgstr "LPD - Line Printer Dæmon"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Præcis RAM-mængde, hvis pćkrævet (fandt %d Mb)"
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
+msgstr ""
+"\n"
+"Hvis du har et ISA kort burde værdiene i næste billede være rigtige.\n"
+"\n"
+"Hvis du har et PCMCIA kort skal du vide irq og io for kortet.\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Rens /tmp ved hver systemopstart"
+msgid "Do not print any test page"
+msgstr "Udskriv ikke nogen testsider"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Create a bootdisk"
-msgstr "Opret opstartsdiskette"
+msgid "Gurmukhi"
+msgstr "Gurmukhi"
#: ../../any.pm:1
#, c-format
-msgid "restrict"
-msgstr "begræns"
+msgid "Force No APIC"
+msgstr "Gennemtving ingen ACPI"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restrict command line options"
-msgstr "Begræns kommandolinie-indstillinger"
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr ""
+"Denne adgangskode er for nemt at gætte (det skal mindst være pć %d tegn)"
-#: ../../any.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Force No APIC"
-msgstr "Gennemtving ingen ACPI"
+msgid "[keyboard]"
+msgstr "[tastatur]"
-#: ../../any.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Enable ACPI"
-msgstr "Aktivér ACPI"
+msgid "FTP proxy"
+msgstr "FTP-proxy"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Delay before booting default image"
-msgstr "Ventetid fűr opstart af forvalgt styresystem"
+msgid "Install List"
+msgstr "Installationsliste"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "compact"
-msgstr "kompakt"
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr ""
+"Ændr\n"
+"Genskabelsessti"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Compact"
-msgstr "Kompakt"
+msgid "Show only for the selected day"
+msgstr "Vis kun for den valgte dag"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Bootloader installation"
-msgstr "Systemopstarterens installation"
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
+"\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
+"\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
+"drakTermServ-oversigt\n"
+"\t\t\t \n"
+" - Lav Etherboot-aktiverede opstartsaftryksfiler:\n"
+" \t\tFor at starte med en kerne via etherboot skal en speciel kerne/"
+"initrd-aftryksfil oprettes.\n"
+" \t\tmkinitrd-net laver meget af dette arbejde og drakTermServ er "
+"bare en grafisk grænseflade\n"
+" \t\tfor at hjælpe til med at hćndtere/ændre pć disse aftryksfiler.\n"
+"\n"
+" - Vedligeholdelse af /etc/dhcpd.conf:\n"
+" \t\tFor at starte klientene over netværk behűver hver klient en "
+"indgang i dhcpd.conf, som udleverer en IP-adresse\n"
+" \t\tog netværksopstart-aftryksfiler til maskinen. drakTermServ "
+"hjælper til med at lave/fjerne disse indgange.\n"
+"\t\t\t\n"
+" \t\t(PCI-kort kan undlade aftryksfilen - etherboot vil efterspűrge "
+"den rigtige aftryksfil. Du bűr\n"
+" \t\togsć bemærke at nćr etherboot ser efter aftryksfilerne forventer "
+"den navne som\n"
+" \t\tboot-3c59x.nbi, fremfor boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tEt typisk dhcpd.conf-afsnit for at understűtte disklűse klienter "
+"ser sćdan ud:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tMens du kan bruge en pűl af IP-adresser, fremfor at opsætte en "
+"specifik opsætningsindgang for\n"
+"\t\t\ten klientmaskine, vil brug af faste adresser lette\n"
+"brugen\n"
+"\t\t\taf klientspecifikke konfigurationsfiler som ClusterNFS tilbyder.\n"
+"\t\t\t\n"
+"\t\t\tBemærk: \"#type\"-indgangen er kun brugt af drakTermServ. Klienter "
+"kan enten være \"tynde\"\n"
+"\t\t\teller 'tykke'. Tynde klienter kűrer stűrsteparten af programmellet "
+"via xdmcp, mens tykke klienter kűrer stűrsteparten\n"
+"af programmellet pć klientmaskinen. En speciel inttab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ bliver\n"
+"\t\t\tskrevet for tynde klienter. Systemkonfigurationsfilerne xdm-config, "
+"kdmrc, og gdm.conf bliver ændrede\n"
+"\t\t\thvis tynde klienter bliver brugt, for at aktivere xdmcp. Idet der er "
+"sikkerhedsproblematik omkring brugen af xdmcp,\n"
+"\t\t\tsć bliver hosts.deny og hosts.allow ændret for at begrænse adgangen "
+"til det lokale subnet.\n"
+"\t\t\t\n"
+"\t\t\tBemærk: Du skal stoppe/starte serveren efter at have tilfűjet eller "
+"ændret klienter.\n"
+"\t\t\t\n"
+" - Vedligeholdelse af /etc/exports:\n"
+" \t\tClusternfs lader dig eksportere rod-filsystemet til disklűse "
+"klienter, drakTermServ\n"
+" \t\topsætter de rigtige indgange for at tillade anonym adgang til "
+"rod-filsystemet fra\n"
+" \t\tdisklűse klienter.\n"
+"\n"
+" \t\tEn typisk eksporterings-indgang for clusternfs er:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASKE(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tHvor SUBNET/MASKE bliver defineret for dit netværk.\n"
+" \t\t\n"
+" - Vedligeholdelse af /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor at brugere skal kunne logge ind pć systemet fra en disklűs "
+"klient, sć mć deres indgang i\n"
+" \t\t/etc/shadow kopieres ind i /etc/shadow\\$\\$CLIENTS\\$\\$. "
+"drakTermServ hjælper til\n"
+" \t\tved at tilfűje og slette brugere fra denne fil.\n"
+"\n"
+" - Per klient /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tVia clusternfs kan hver disklűs klient have deres egen unikke "
+"konfigurationsfil\n"
+" \t\tpć rod-filsystemet pć serveren. I fremtiden vil drakTermServ "
+"kunne hjælpe til med at lave disse\n"
+" \t\tfiler.\n"
+"\n"
+" - Per klient systemkonfigurationsfiler:\n"
+" \t\tVia clusternfs kan hver disklűs klient have deres egne unikke "
+"konfigurationsfiler\n"
+" \t\tpć rod-filesystemet pć serveren. I fremtiden vil drakTermServ "
+"kunne hjælpe til med at oprette disse filer\n"
+" \t\tsom feks. /etc/modules.conf, /etc/sysconfig/mouse, /etc/"
+"sysconfig/keyboard pć per klient\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ vil konfigurere denne fil til at virke sammen med "
+"aftryksfilerne som bliver oprettet af\n"
+" \t\tmkinitrd-net, og indgangene i /etc/dhcpd.conf, for at udlevere "
+"netværks-opstartsaftryksfilerne til hver \n"
+" \t\tdisklűs klient.\n"
+"\n"
+" \t\tEn typisk tftp-konfigurationsfil ser sćdan ud:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tÆndringen her fra den normale installation er ændringen af "
+"disable-flaget til\n"
+" \t\t'no' og ændring af filstien til /var/lib/tftpboot, hvor mkinitrd-"
+"net\n"
+" \t\tplacere sine aftryksfiler.\n"
+"\n"
+" - Opret etherboot-disketter/CD'er:\n"
+" \t\tDe disklűse klientmaskiner behűver enten ROM aftryksfiler pć "
+"netværkskortet, en opstartsdiskette\n"
+" \t\teller en CD for at initiere opstartssekvensen. drakTermServ vil "
+"hjælpe til med generere disse aftryksfiler,\n"
+" \t\tbaseret pć netværkskortet i klientmaskinen.\n"
+" \t\t\n"
+" \t\tEt basiseksempel pć oprettelse af en opstartsdiskette for 3Com "
+"3c509 manuelt:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "First sector of boot partition"
-msgstr "Fűrste sektor af opstartspartition"
+msgid "512 kB"
+msgstr "512 kb"
-#: ../../any.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Fűrste sektor pć disken (MBR)"
+msgid "Logs"
+msgstr "Logger"
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Hvor vil du placere opstartsprogrammet?"
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr "(Bemærk: Parallelle porte kan ikke auto-detekteres)"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "LILO/grub Installation"
-msgstr "LILO/grub-installering"
+msgid "<control>N"
+msgstr "<control>N"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "SILO Installation"
-msgstr "SILO-installering"
+msgid "What kind of card do you have?"
+msgstr "Hvad slags kort har du?"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Skip"
-msgstr "Spring over"
+msgid "<control>O"
+msgstr "<control>O"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
-msgid "On Floppy"
-msgstr "Pć diskette"
+msgid "Security"
+msgstr "Sikkerhed"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "First sector of the root partition"
-msgstr "Fűrste sektor af rodpartitionen"
+msgid ""
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
+msgstr ""
+"Du kan ogsć bruge den grafiske grænseflade 'xpdq' til at sætte "
+"valgmuligheder og behandle udskriftsopgaver.\n"
+"Hvis du bruger KDE som skrivebordsmiljű, har du en 'panik-knap', en ikon pć "
+"skrivebordet, benævnt med 'STOP printer!', som stopper alle udskriftsopgaver "
+"űjeblikkeligt nćr du klikker pć den. Dette er fx nyttigt hvis papiret "
+"krűller sammen.\n"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#, c-format
+msgid "<control>Q"
+msgstr "<control>Q"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Unknown"
+msgstr "Ukendt"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr "Denne server er allerede pć listen, og kan ikke blive tilfűjet igen.\n"
+
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#, c-format
+msgid "Network Configuration"
+msgstr "Konfigurér netværk"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>S"
+msgstr "<control>S"
+
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
msgstr ""
-"Du besluttede at installere opstartsindlæseren pć en partition.\n"
-"Dette indikerer at du allerede har en opstartsindlæser pć disken som du "
-"starter op fra (fx System Commander).\n"
-"\n"
-"Hvilket drev starter du op fra?"
+"Protokol for resten af verden \n"
+" ingen D-kanal (lejet linje)"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Creating bootdisk..."
-msgstr "Opretter opstartsdiskette..."
+msgid "Option %s must be a number!"
+msgstr "Valg %s skal være et tal!"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Indsæt en diskette i %s"
+msgid "Notice"
+msgstr "Bemærk"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Vælg det diskette-drev, du vil benytte til at lave boot-disketten"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
+msgstr ""
+"Argumenter: (arg)\n"
+"\n"
+" Aktivér/deaktivér daglig sikkerhedskontrol."
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Second floppy drive"
-msgstr "Andet diskette-drev"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
+"Argumenter: (arg)\n"
+"\n"
+"Aktivér/deaktivér 'crontab' og 'at' for brugere. Put tilladte brugere i /etc/"
+"cron.allow og /etc/at.allow\n"
+"(se man at(1) og crontab(1))."
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "First floppy drive"
-msgstr "Fűrste diskette-drev"
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr ""
+"Du har ikke konfigureret X. Er du sikker pć at du virkelig űnsker dette?"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "Der er desværre ikke noget tilgængeligt diskette-drev"
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
+"Konfigurationen af printeren vil ske helt automatisk. Hvis din printer ikke "
+"blev fundet korrekt eller hvis du foretrækker en tilpasset "
+"printerkonfiguration, sć slć 'Manuel konfiguration' til."
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "What type of partitioning?"
+msgstr "Hvilken slags partitionering?"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
+"file list sent by FTP: %s\n"
+" "
msgstr ""
-"En tilpasset opstartsdiskette lader dig opstarte Linux systemet uden at være "
-"afhængig af den normale opstarter. Det kan være nyttigt, hvis du ikke vil "
-"installere LILO (eller grub) pć dit system - eller hvis et andet "
-"operativsystem fjerner LILO, eller hvis LILO ikke virker med din hardware. "
-"En tilpasset opstartsdiskette kan ogsć bruges sammen med Mandrakes `rescue "
-"image', hvilket gűr det meget nemmere at reparere systemet i tilfælde af "
-"systemnedbrud. \n"
-"Vil du lave en opstartsdiskette til dit system?\n"
-"%s"
+"filliste sendt via FTP: %s\n"
+" "
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
+msgid "Interface"
+msgstr "Grænseflade"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
+"Options Description:\n"
"\n"
+" - Backup System Files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Backup User Files: \n"
+"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
+"\n"
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane. To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
msgstr ""
+"beskrivelse af valgmuligheder:\n"
+"\n"
+" - Lav sikkerhedskopi af systemfiler:\n"
+" \n"
+"\tDenne mulighed lader dig sikkerhedskopiere dit /etc katalog,\n"
+"\tsom indeholder alle konfigurationsfiler. Vær \n"
+"\tforsigtig pć genskabelsestrinnet med ikke at overskrive:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Lav sikkerhedskopi af brugerfiler: \n"
+"\n"
+"\tDenne mulighed lader dig vælge alle de brugere som du vil lave\n"
+"\tsikkerhedskopier for.\n"
+"\tFor at spare pć diskplads anbefales du ikke medtager netlæseres\n"
+"\tcache.\n"
+"\n"
+" - Lav sikkerhedskopi af andre filer: \n"
+"\n"
+"\tDenne mulighed lader dig tilfűje mere data som skal gemmes.\n"
+"\tMed denne sikkerhedskopieringsmćde er det ikke muligt i űjeblikket \n"
+"\tat vælge inkrementalbackup.\t\t\n"
+" \n"
+" - Inkrementalbackupper:\n"
+"\n"
+"\tInkrementalbackup er den stærkeste valgmulighed for \n"
+"\tsikkerhedskopiering. Denne mulighed lader dig sikkerhedskopiere \n"
+"\talle dine data den fűrste gang, og derefter kun de ændrede data.\n"
+"\tSć vil du i genskabelsestrinnet kunne genskabe dine data fra en \n"
+"\tangivet dato.\n"
+"\tHvis du ikke har valgt denne mulighed vil alle gamle\n"
+"\tsikkerhedskopier blive slettet fűr hver sikkerhedskopiering. \n"
"\n"
"\n"
-"(ADVARSEL! Du bruger XFS til din root-partition,\n"
-"oprettelse af en opstartsdiskette pć en 1.44 Mb diskette vil formentlig\n"
-"mislykkes, fordi XFS kræver en meget stor driver)."
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
msgstr ""
-"En tilpasset opstartsdiskette lader dig starte Linux systemet op uden at "
-"være afhængig af den normale opstarter. Det kan være nyttigt, hvis du ikke "
-"vil installere SILO pć dit system - eller hvis et andet operativsystem "
-"fjerner SILO, eller hvis SILO ikke virker med dit maskinel. En tilpasset "
-"opstartsdiskette kan ogsć bruges sammen med Mandrakes `rescue image', "
-"hvilket gűr det meget nemmere at reparere systemet i tilfælde af "
-"systemnedbrud.\n"
+"Argumenter: (arg, udtryk='*.*', dev='tty12')\n"
"\n"
-"Hvis du űnsker at lave en opstartsdiskette til dit system, indsæt en "
-"diskette i dit fűrste diskettedrev og tryk 'Ok'."
+"Aktivér/deaktivér syslog-rapporter til konsol 12. \\fIudtryk\\fP er\n"
+"udtrykket der beskriver hvad der skal logges (se syslog.conf(5) for flere "
+"detaljer) og\n"
+"'dev' enheden som loggen skal rapporteres pć."
-#: ../../bootloader.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Du kan ikke installere opstartsindlæseren pć en %s-partition\n"
+msgid "comma separated strings"
+msgstr "kommaseparerede strenge"
-#: ../../bootloader.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "not enough room in /boot"
-msgstr "Ikke nok plads i /boot"
+msgid "These are the machines from which the scanners should be used:"
+msgstr "Dette er maskinerne fra hvilke skannerne skal bruges:"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Den fremhævede mulighed vil blive startet automatisk om %d sekunder."
+msgid "Messages"
+msgstr "Beskeder"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "kommandoerne fűr opstart, eller 'c' for en kommandolinie."
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr "Ukendt|CPH06X (bt878) [mange leverandűrer]"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Tryk 'enter' for at starte det valgte OS, 'e' for at redigere"
+msgid "POP and IMAP Server"
+msgstr "POP- og IMAP-server"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Brug tasterne %c og %c til at vælge mellem mulighederne."
+msgid "Mexico"
+msgstr "Mexico"
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the suggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Velkommen til GRUB styresystemsvælgeren!"
+msgid "Model stepping"
+msgstr "Modelserie"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Rwanda"
+msgstr "Rwanda"
-#: ../../bootloader.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Grub"
-msgstr "Grub"
+msgid "Do you have any %s interfaces?"
+msgstr "Har du nogen %s grænsesnit?"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with text menu"
-msgstr "LILO med tekstmenu"
+msgid "Switzerland"
+msgstr "Schweiz"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO med grafisk menu"
+msgid "Brunei Darussalam"
+msgstr "Brunei"
-#: ../../bootloader.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Remote lpd Printer Options"
+msgstr "Parametre til ekstern lpd"
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
"\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
msgstr ""
-"Velkommen til %s styresystems-vælgeren!\n"
+"GNU/Linux er et flerbrugersystem, det vil sige at hver bruger kan have sine "
+"egne præferencer, sine egne filer og sć videre. Du kan læse "
+"startvejledningen for at lære mere om flerbrugersystemer.\n"
+"I modsætning til root, som er administratoren, vil brugerne som du tilfűjer "
+"her ikke have lov til at ændre nogetsomhelst undtagen deres egne filer og "
+"deres egne opsætninger, hvilket beskytter systemet mod utilsigtede eller "
+"ondartede ændringer som pćvirker hele systemet. Du skal oprette i det "
+"mindste én almindelig bruger til dig selv - dette er den konto som du bűr "
+"bruge til almindelig dagligt brug. Selvom det er meget nemt at logge ind som "
+"root for at gűre alt, kan det ogsć være meget farligt!\n"
+"En meget simpel fejltagelse kan betyde at dit system ikke virker mere. Hvis "
+"du laver en alvorlig fejltagelse som almindelig bruger, vil det værste der "
+"kan ske at du vil tabe nogen information, men det vil ikke pćvirke hele "
+"systemet.\n"
"\n"
-"Vælg et styresystem i den ovenstćende liste eller\n"
-"vent %d sekunder for at starte standard.\n"
+"Det fűrste felt spűrger efter dit rigtige navn. Dette er naturligvis ikke "
+"krævet -du kan faktisk skrive hvad du lyster. DrakX vil bruge det fűrste ord "
+"du indtastede i feltet og kopiere det til '%s'-feltet, hvilket er navnet, "
+"som denne bruger skal indtaste for at logge ind pć systemet. Hvis du űnsker "
+"det kan du overskrive det forvalgte of ændre brugernavnet. Det næste trin er "
+"at indtaste en adgangskode. Fra et sikkerhedsmæssigt synspunkt er "
+"adgangskoden for en ikke-priviligeret (normal) bruger er ikke sć vigtigt som "
+"det for Root, men det er ingen grund til at negligere det alligevel, ved at "
+"lade det være blankt eller at gűre det for nemt - nćr det kommer til stykket "
+"er dine egne filer der er i fare.\n"
+"\n"
+"Nćr du har klikket pć '%s', kan du tilfűje andre brugere. Tilfűj en bruger "
+"for hver af dine venner: fx din far og din sűster. Nćr du har tilfűjet alle "
+"de brugere du űnsker, vælg da '%s ->'.\n"
"\n"
+"Klik pć '%s'-knappen lader dig ændre standard-skál for denne bruger\n"
+"(bash er standard). \n"
+"\n"
+"Nćr du er færdig med at tilfűje brugere, vil du blive spurgt om at vælge en "
+"bruger som automatisk kan logge ind pć systemet nćr maskinen startes op. "
+"Hvis du er interesseret i denne facilitet (og ikke kærer dig synderligt om "
+"lokal sikkerhed), sć vælg den űnskede bruger og vindueshćndtering og klik '%"
+"s ->'.\n"
+"Hvis du ikke er interesseret i denne facilitet, sć afmarkér boksen med '%s'"
-#: ../../common.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "consolehelper missing"
-msgstr "konsolhjælper mangler"
+msgid "Configure Internet Access..."
+msgstr "Konfigurér Internetadgang..."
-#: ../../common.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "kdesu missing"
-msgstr "kdesu mangler"
+msgid "Norway"
+msgstr "Norge"
-#: ../../common.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Űjebliksbilleder vil være tilgængelige efter installation i %s"
+msgid "Danish"
+msgstr "Dansk"
-#: ../../common.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "Kan ikke lave űjebliksbilleder fűr partitionering"
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
+msgstr ""
+"Aktiverer automatisk numlock-tast i konsol og XFree ved\n"
+"opstart."
-#: ../../common.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "%d seconds"
-msgstr "%d sekunder"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+"Indtast IP konfigurationen for denne maskine. Hvert felt skal udfyldes\n"
+"med en IP adresse i `dotted-decimal' notation (for eksempel 1.2.3.4)."
-#: ../../common.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "1 minute"
-msgstr "1 minut"
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
+msgstr ""
+"Mandrake Linux installationen er fordelt pć flere cdrom-er. DrakX véd om en "
+"valgt pakke ligger pć en anden cdrom, sć den vil udskyde den aktuelle cd og "
+"bede dig om at isætte den rigtige, om nűdvendigt."
-#: ../../common.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "%d minutes"
-msgstr "%d minutter"
+msgid "Processors"
+msgstr "Processorer"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "TB"
-msgstr "Tb"
+msgid "Bulgaria"
+msgstr "Bulgarien"
-#: ../../common.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "GB"
-msgstr "Gb"
+msgid "No NIC selected!"
+msgstr "Ingen NIC valgt!"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "MB"
-msgstr "Mb"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr "Svalbard og Jan Mayen űerne"
-#: ../../common.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "KB"
-msgstr "Kb"
+msgid ""
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
+msgstr ""
+"Problemer indtraf under konfigurationen.\n"
+"Afprűv din forbindelse med net_monitor eller mcc. Hvis din forbindelse ikke "
+"virker, kan du prűve at genstarte konfigurationen."
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "United States"
-msgstr "U.S.A."
+msgid "partition %s is now known as %s"
+msgstr "partition %s er nu kendt som %s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Austria"
-msgstr "Űstrig"
+msgid "Backup Other files..."
+msgstr "Sikkerhedskopiér andre filer..."
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Italy"
-msgstr "Italien"
+msgid "SMB server IP"
+msgstr "SMB-serverens IP"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Netherlands"
-msgstr "Holland"
+msgid "Congo (Kinshasa)"
+msgstr "Congo (Kinshasa)"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sweden"
-msgstr "Sverige"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "Partitionstabellen for disk %s vil nu blive skrevet pć disken!"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Norway"
-msgstr "Norge"
+msgid "Installing HPOJ package..."
+msgstr "Installerer HPOJ-pakke..."
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Greece"
-msgstr "Grækenland"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr ""
+"En tilpasset opstartsdiskette lader dig opstarte Linux systemet uden at være "
+"afhængig af den normale opstarter. Det kan være nyttigt, hvis du ikke vil "
+"installere LILO (eller grub) pć dit system - eller hvis et andet "
+"operativsystem fjerner LILO, eller hvis LILO ikke virker med din hardware. "
+"En tilpasset opstartsdiskette kan ogsć bruges sammen med Mandrakes `rescue "
+"image', hvilket gűr det meget nemmere at reparere systemet i tilfælde af "
+"systemnedbrud. \n"
+"Vil du lave en opstartsdiskette til dit system?\n"
+"%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Germany"
-msgstr "Tyskland"
+msgid ", USB printer \\#%s"
+msgstr ", USB printer \\#%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Czech Republic"
-msgstr "Tjekkiet"
+msgid "Latvian"
+msgstr "Lettisk"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belgium"
-msgstr "Belgien"
+msgid "monthly"
+msgstr "mćnedligt"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "France"
-msgstr "Frankrig"
+msgid "Module name"
+msgstr "Modulnavn"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Costa Rica"
-msgstr "Costa Rica"
+msgid "Start at boot"
+msgstr "Start ved opstart"
-#: ../../fsedit.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental Backups"
+msgstr "Brug inkrementalbackup (overskriv ikke gamle sikkerhedskopier)"
+
+#: ../../any.pm:1
#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Fejl ved ćbning af %s for skrivning: %s"
+msgid "First sector of drive (MBR)"
+msgstr "Fűrste sektor pć disken (MBR)"
-#: ../../fsedit.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Nothing to do"
-msgstr "Ingenting at lave"
+msgid "Joystick"
+msgstr "Joystick"
-#: ../../fsedit.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Ikke nok fri plads til at tildele nye partitioner automatisk"
+msgid "El Salvador"
+msgstr "El Salvador"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Du kan ikke bruge et krypteret filsystem for monteringspunkt %s"
+msgid "Use Unicode by default"
+msgstr "Brug ISO 10646 som standard"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-"Du skal have et rigtigt filsystem (ext2/ext3, reiserfs, xfs eller jfs) til "
-"dette monteringspunkt\n"
+msgid "the module of the GNU/Linux kernel that handles the device"
+msgstr "modulet i GNU/Linux-kernen som hćndterer denne enhed"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Dette katalog bűr ligge pć rod-filsystemet"
+msgid "Trying to rescue partition table"
+msgstr "Forsűger at redde partitionstabellen"
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Du kan ikke bruge et LVM logisk delarkiv for monteringspunkt %s"
+msgid "Option %s must be an integer number!"
+msgstr "Valg %s skal være et helt tal!"
-#: ../../fsedit.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
+"Entries you'll have to fill:\n"
+"%s"
msgstr ""
-"Du har valgt en programmeret RAID-partition som rod (/).\n"
-"Ingen systemopstarter kan hćndtere dette uden en /boot partition.\n"
-"Vær sikker pć at tilfűje en /boot partition"
+"Indgange som du skal udfylde:\n"
+"%s"
-#: ../../fsedit.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Der findes allerede en partition med monterings-sti %s\n"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "Kan ikke starte levende opgradering!!!\n"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "Monteringspunkter bűr kun indeholde bogstaver og tal"
+msgid "Name: "
+msgstr "Navn: "
-#: ../../fsedit.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Monteringsstier skal begynde med /"
+msgid "16 million colors (24 bits)"
+msgstr "16 millioner (24 bit)"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Du kan ikke bruge ReiserFS pć partitioner mindre end 32Mb"
+msgid "Allow all users"
+msgstr "Tillad alle brugere"
-#: ../../fsedit.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Du kan ikke bruge JFS pć partitioner mindre end 16Mb"
+msgid "The official MandrakeSoft Store"
+msgstr "Den officielle MandrakeSoft-butik"
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Resizing"
+msgstr "Ændrer stűrrelsen"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Cable connection"
+msgstr "Kabelforbindelse"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "User"
+msgstr "Bruger"
#: ../../fsedit.pm:1
#, c-format
@@ -991,1288 +1911,252 @@ msgstr ""
"\n"
"Er du indforstćet med at űdelægge alle partitionerne?\n"
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Error"
-msgstr "Fejl"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr "Lav ny sikkerhedskopi fűr genskabning (kun for inkrementalbackupper)."
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "server"
-msgstr "server"
+msgid "Printer on parallel port \\#%s"
+msgstr "Printer pć parallel port \\#%s"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "with /usr"
-msgstr "med /usr"
+msgid "Name"
+msgstr "Navn"
-#: ../../fsedit.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "simple"
-msgstr "simpel"
+msgid "mkraid failed"
+msgstr "mkraid fejlede"
-#: ../../fs.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Enabling swap partition %s"
-msgstr "Formaterer swap-partition %s"
+msgid "Button 3 Emulation"
+msgstr "Emulering af knap 3"
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "error unmounting %s: %s"
-msgstr "fejl ved afmontering af %s: %s"
+msgid "Sending files..."
+msgstr "Sender filer..."
-#: ../../fs.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "montering af partition %s i katalog %s mislykkedes"
+msgid "Israeli (Phonetic)"
+msgstr "Israelsk (Fonetisk)"
-#: ../../fs.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mounting partition %s"
-msgstr "Monterer partition %s"
+msgid "access to rpm tools"
+msgstr "adgang til rpm-værktűjer"
-#: ../../fs.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Checking %s"
-msgstr "Tjekker %s"
+msgid "edit"
+msgstr "redigér"
-#: ../../fs.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Formatting partition %s"
-msgstr "Formaterer partition %s"
+msgid "You must choose/enter a printer/device!"
+msgstr "Du skal vælge eller indtaste en printer/enhed!"
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Opretter og formaterer fil %s"
+msgid "Permission problem accessing CD."
+msgstr "Problem med rettigheder ved adgang til CD."
-#: ../../fs.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Ved ikke hvordan man formaterer %s som type %s"
+msgid "Phone number"
+msgstr "Telefonnummer"
-#: ../../fs.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatering af %s mislykkedes"
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr "Drivprogrammet %s for lydkortet er ikke listet"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Klik pć 'Næste ->' hvis du űnsker at slette alle data og partitioner der "
-"ligger pć dette diskdrev. Vær omhyggelig, efter klik pć 'Næste ->' vil du "
-"ikke være i stand til at redde nogen data eller partitioner, der ligger pć "
-"dette diskdrev, inklusive alle Windows data.\n"
-"Klik pć '<- Forrige' for at stoppe denne handling uden at tabe nogen data og "
-"partitioner der er tilstede pć dette diskdrev."
+msgid "Printer name, description, location"
+msgstr "Printernavn, beskrivelse, sted"
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Vælg det diskdrev som du vil slette for at installere din nye Mandrake Linux "
-"partition. Vær forsigtig, alle data som er pć der, vil gć tabt og vil ikke "
-"kunne genskabes!"
+msgid "USA (broadcast)"
+msgstr "USA (broadcast)"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
+"Please choose the\n"
+"media for backup."
msgstr ""
-"Som en opsummering vil DrakX give dig en oversigt over forskellig "
-"information\n"
-"som den har om dit system. Afhængig af installeret maskinel kan du have\n"
-"et eller flere af de fűlgende punkter. Hvert punkt bestćr af en overskrift\n"
-"fulgt af en kort opsummering af den nuværende konfiguration. Klik pć\n"
-"den tilsvarende \"Konfigurér\" knap for at ændre pć opsætningen.\n"
-"\n"
-" * \"Tastatur\": Tjek at din tastaturopsætning er korrekt og ændr om "
-"nűdvendigt.\n"
-"\n"
-" * \"Land\": Tjek at du har valgt korrekt land. Hvis du ikke er i dette "
-"land,\n"
-"sć klik pć \"Konfigurér\"-knappen og vælg et andet land. Hvis dit land dit "
-"ikke er i\n"
-"listen, sć klik pć \"Mere\"-knappen for at fć en fuldstændig liste.\n"
-"\n"
-" ' \"Tidszone\": DrakX bestemmer din tidszone ud fra hvilket land du har "
-"valgt.\n"
-"Du kan klikke pć \"Konfigurér\" her, hvis dette ikke er korrekt.\n"
-"\n"
-" * \"Mus\" :Tjek museopsætningen og klik pć knappen for at ændre om "
-"nűdvendigt.\n"
-"\n"
-" * \"Printer\": Ved at klikke pć \"Konfigurér\"-knappen ćbnes "
-"printeropsætnings-\n"
-"hjælperen. Konsultér det tilhűrende kapitel i opstartsguiden for mere\n"
-"information om hvordan en printer kan sættes op. Grænsefladen som er vist\n"
-"dér ligner det som benyttes under installationen.\n"
-"\n"
-" * 'Lydkort': Hvis et lydkort er blevet fundet pć dit system, vil det blive "
-"vist hér. Hvis du bemærker at det viste lydkort ikke er det som faktisk er "
-"til stede pć systemet, kan du klikke pć knappen og vælge en anden driver.\n"
-" * \"Grafisk grænseflade\": DrakX vil opsætte din grafiske grænseflade i "
-"oplűsning\n"
-"800x600 eller 1024x768. Hvis det ikke passer til dine behov, sć klik pć "
-"\"Konfigurér\"-\n"
-"knappen for at ændre pć opsætningen.\n"
-"\n"
-" * \"TV-kort\": Hvis et TV-kort er fundet i din maskine, er det vist her. "
-"Hvis du har\n"
-"et TV-kort som ikke er fundet, sć klik \"Konfigurér\" for at sætte det op "
-"manuelt.\n"
-"\n"
-" * \"ISDN-kort\": Hvis der er fundet et ISDN-kort, vil det vises her. Du kan "
-"klikke pć\n"
-"\"Konfigurér\" for at ændre pć parameterne til kortet.\n"
-"\n"
-" * \"Netværk\": Vælg dette for at ændre pć internetforbindelsen eller den "
-"lokale\n"
-"netværksopsætning.\n"
-"\n"
-" * \"Sikkerhedsniveau\": Du kan her ændre pć sikkerhedsniveauet som er "
-"defineret tidligere.\n"
-"\n"
-" * \"Brandmur\": Hvis du skal koble din maskine direkte til internet, er det "
-"en god idé\n"
-"at beskytte sig mod angreb med en brandmur. Opstartsguiden har mere om\n"
-"dette.\n"
-"\n"
-" * \"Opstartsindlæser\": Hvis du vil ændre pć konfigurationen for "
-"opstartsindlæseren,\n"
-"sć klik pć denne knap. Dette bűr forbeholdes avancerede brugere.\n"
-"\n"
-" * \"Tjenester\": Her kan du bestemme hvilke tjenester som skal startes pć "
-"din\n"
-"maskine. Hvis du skal bruge maskinen som server er det en god idé at "
-"kontrollere dette."
+"Vælg mediet for\n"
+"sikkerhedskopiering."
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
-msgstr ""
-"'Lydkort': Hvis et lydkort er blevet fundet pć dit system, vil det blive "
-"vist her. Hvis du bemærker at det viste lydkort ikke er det som faktisk er "
-"til stede pć systemet, kan du klikke pć knappen og vælge en anden driver."
+msgid "Use Xinerama extension"
+msgstr "Brug Xinerama-udvidelse"
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot er en systemopstarter til NewWorld MacIntosh-maskinel. Den kan starte "
-"enten GNU/Linux, MacOS eller MacOSX, hvis de er til stede pć din maskine. "
-"Sædvanligvis vil disse andre styresystemer blive korrekt opdaget og "
-"installeret. Hvis dette ikke skulle være tilfældet kan du her tilfűje en "
-"indgang i hćnden. Vær omhyggelig med at vælge de korrekte parametre.\n"
-"\n"
-"Yaboots hovedvalg er:\n"
-"\n"
-" * Init-besked: En enkel tekstbesked som vises fűr valg af opstart.\n"
-"\n"
-" * Opstartsenhed: Angiver hvor du űnsker at placere informationen som er "
-"nűdvendig for at starte GNU/Linux. Du vil generelt have indstillet en "
-"bootstrap-partition tidligere til at have denne information.\n"
-"\n"
-" * Open firmwareforsinkelse: Til forskel fra LILO er der to forsinkelser "
-"mulige med yaboot. Den fűrste forsinkelse bliver mćlt i sekunder og du kan "
-"ved det punkt vælge mellem CD, OF-opstart, MacOS eller Linux.\n"
-"\n"
-" * Ventetid fűr kerneopstart: Denne er lig LILO-opstartsforsinkelsen. Efter "
-"at have valgt Linux vil du have denne ventetid gange 0,1 sekunder fűr din "
-"forvalgte kernebeskrivelse bliver valgt.\n"
-"\n"
-" * Aktivér CD-opstart?: Hvis du vælger dette valg vil du kunne trykke 'C' "
-"for CD ved det fűrste opstartsvalg.\n"
-"\n"
-" * Aktiver OF-opstart?: Hvis du vælger dette valg vil du kunne trykke 'N' "
-"for 'Open Firmware' ved det fűrste opstartsvalg.\n"
-"\n"
-" * Forvalgt styresystem: Du kan vælge hvilket forvalgt styresystem der skal "
-"startes nćr Open Firmwareforsinkelsen er udlűbet."
+msgid "Loopback"
+msgstr "Loopback"
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
msgstr ""
-"Du kan tilfűje flere valgmuligheder i Yaboot, til andre styresystemer, andre "
-"kerner, eller til nűd-opstart.\n"
-"\n"
-"For andre styresystemer bestćr indgangen blot af et navn og rodpartitionen\n"
-"\n"
-"Der er for Linux nogen fć valgmuligheder:\n"
-"\n"
-" * Label: dette er simpelthen navnet som du skal indtaste til ledeteksten "
-"fra Yaboot for at vælge denne opstartsmulighed.\n"
-"\n"
-" * Image: Dette vil være navnet pć den kerne der skal opstartes. Typisk "
-"vmlinux eller en variation pć vmlinux med en endelse.\n"
-"\n"
-" * Root: root enheden eller \"/\" for din Linux installation.\n"
-"\n"
-" * Append: pć Apple udstyr bruges kerne-append muligheden ofte til at hjælpe "
-"med initialisering af billedudstyr, eller til at aktivere emulering af "
-"museknapper for de manglende knap-2 og knap-3 pć musen pć en typisk Apple "
-"mus. Det fűlgende er nogle eksempler:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: denne mulighed kan bruges enten til at indlæse de fűrste moduler, "
-"fűr opstartsenheden er tilgængelig, eller til at indlæse en ramdisk ved "
-"opstart i en nűdsituation.\n"
-"\n"
-" * Initrd-size: den almindelige stűrrelse pć en ramdisk er generelt 4.096 "
-"kbyte. Hvis du har brug for at udlægge en stor ramdisk kan denne mulighed "
-"bruges til at angive en ramdisk stűrre end standarden.\n"
-"\n"
-" * Read-write: normalt bliver rod-partitionen fűrst monteret skrivebeskyttet "
-"for at muliggűre et filsystemstjek fűr systemet gćr i luften. Du kan "
-"tilsidesætte denne standard med denne valgmulighed.\n"
-"\n"
-" * NoVideo: skulle Apple-billedudstyret vise sig at være specielt "
-"problemfyldt kan du vælge denne mulighed for at starte op i 'novideo'-"
-"tilstand, med indbygget rammebufferunderstűttelse.\n"
-"\n"
-" * Default: vælger denne indgang som værende det normale Linux valg, som "
-"vælges ved at trykke RETUR ved yaboots ledetekst. Denne indgang vil ogsć "
-"blive fremhævet med en '*', hvis du trykker Tab for at se opstartsvalgene."
+"Kan ikke lukke mkbootdisk ordentligt: \n"
+" %s \n"
+" %s"
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"DrakX vil fűrst finde alle IDE-enheder der er tilstede pć din maskine. Den "
-"vil ogsć lede efter en eller flere PCI SCSI-kort pć dit system. Hvis et SCSI-"
-"kort findes, vil DrakX automatisk installere en driver til det.\n"
-"\n"
-"Da maskineleftersűgningen ikke er idiotsikker, kan DrakX fejle i at finde "
-"dine diskdrev. I sć fald mć du angive dit maskinel manuelt.\n"
-"\n"
-"Hvis du mćtte angive dit PCI SCSI-kort manuelt, vil DrakX spűrge om du vil "
-"specificere nogle indstillingsmuligheder for den. Du bűr lade DrakX spűrge "
-"udstyret om opsætning af kortspecifikke indstillinger, som er nűdvendige for "
-"at initialisere kortet. De fleste gange vil DrakX finde ud af dette uden "
-"problemer.\n"
-"\n"
-"Hvis DrakX ikke kan fć oplysninger om indstillinger ud af udstyret, som skal "
-"bruges til opsætningen, skal du angive opsætningsinformation til driveren. "
+msgid "West Europe"
+msgstr "Vesteuropa"
-#: ../../help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
msgstr ""
-"Nu er det tid til at vælge et udskrivningssystem for din maskine. Andre "
-"styresystemer tilbyder mćske ét, men Mandrake tilbyder to.\n"
-"\n"
-"Printersystemerne er hver især bedst til en bestemt konfigurationstype.\n"
-"\n"
-" * 'pdq' - som betyder 'print, don't queue' (udskriv, kű ej), er valget, "
-"hvis du har en direkte forbindelse til din printer, og du űnsker at kunne "
-"klare printproblemer med det samme, og du ikke har nogen printere via "
-"netværk. ('pdq' vil kun behandle meget simple netværkstilfælde, og er lidt "
-"slűvt pć netværk.) Vælg 'pdq' hvis dette er din fűrste erfaring med GNU/"
-"Linux.\n"
-"\n"
-" * 'CUPS' - 'Common Unix Printing System' (Fælles printersystem for Unix) er "
-"fremragende til at udskrive pć din lokale printer, og ogsć pć den, der stćr "
-"pć den anden side af jordkloden. Det er nemt at konfigurere, og kan virke "
-"som en server eller klient for det bedagede 'lpd'-printsystem, sć det er "
-"kompatibelt med de tidligere systemer, som stadig kan have brug for "
-"udskriftstjenester. Det er ganske stærkt, men den basale opsætning er næsten "
-"lige sć nem som for 'pdq'. Hvis du har brug for at dette efterligner en "
-"'lpd'-server, skal du aktivere 'cups-lpd'-dæmonen. CUPS har grafiske "
-"grænseflader for udskrivning og valg af printermuligheder, og for "
-"administration af printeren.\n"
+"[VALGMULIGHEDER] [PROGRAM-NAVN]\n"
"\n"
-"Du kan ændre dit valg senere ved at kűre PrinterDrake fra Mandrakes "
-"Kontrolcenter, og klikke pć ekspert-knappen."
+"VALGMULIGHEDER:\n"
+" --help - udskriv denne hjælpebesked.\n"
+" --report - program bær være én af Mandrakes værktűjer\n"
+" --incident - program bær være én af Mandrakes værktűjer"
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
-msgstr ""
-"LILO og grub er opstartsindlæsere for GNU/Linux. Normalt er dette trin\n"
-"helt automatisk. DrakX vil analysere opstartssektoren pć disken og\n"
-"handle ud fra det som findes der.\n"
-"\n"
-" * Hvis en opstartssektor for Windows bliver fundet, vil den erstatte denne "
-"med\n"
-"en grub- eller LILO-opstartsektor. Pć denne mćde kan du indlæse enten\n"
-"GNU/Linux eller et andet operativsystem.\n"
-"\n"
-" * Hvis en opstartsektor for grub eller LILO bliver fundet, vil den blive "
-"erstattet\n"
-"med en ny.\n"
-"\n"
-"Hvis det ikke er mulig at afgűre dette automatisk, vil DrakX spűrge dig "
-"hvor\n"
-"opstartsindlæseren skal installeres.\n"
-"\n"
-"\"Opstartsenhed\": I de fleste tilfælde vil du ikke űnske at ændre pć\n"
-"standardvalget (\"Fűrste sektor af harddisk (MBR)\"), men hvis du "
-"foretrækker\n"
-"det, kan opstartsindlæseren installeres pć en anden disk, eller til og med\n"
-"pć en diskette (\"Pć diskette\"). "
+msgid "Harddrake2 version %s"
+msgstr "Harddrake2 version %s"
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-"Efter du har konfigureret de generelle parametre for opstartsindlæseren, vil "
-"listen med opstartsmuligheder, som vil være tilgængeligt ved opstarten, "
-"blive vist.\n"
-"\n"
-"Hvis der er andre operativsystemer installeret pć din maskine, vil de "
-"automatisk blive tilfűjet til opstartsmenuen. Du kan finjustere de "
-"eksisterende muligheder ved at klikke 'Tilfűj' for at oprette en ny indgang; "
-"vælg en indgang og klik pć 'Ændr' eller 'Fjern' for at ændre eller fjerne "
-"den. 'O.k.' bekræfter dine ændringer.\n"
-"\n"
-"Mćske vil du ikke űnske at givea dgang til disse andre operativsystemer til "
-"nogensomhelst, som har adgang til konsollen og genstarter maskinen. Du kan "
-"slette de tilsvarende indgange til operativsystemerne for at fjerne dem fra "
-"opstartsindlæserens menu, men du vil sć have brug for en opstartsdiskette "
-"for at kunne starte disse andre operativsystemer op!"
+msgid "Copying %s"
+msgstr "Kopierer %s"
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
-msgstr ""
-"Denne dialog giver dig mulighed for at finindstille din opstartsindlæser:\n"
-"\n"
-" * 'Opstartsindlæser der bruges': der er tre muligheder for din "
-"opstartsindlæser:\n"
-"\n"
-" * 'GRUB': hvis du foretrækker GRUB (tekstmenu).\n"
-"\n"
-" * 'LILO med tekstmenu': hvis du foretrækker LILO med tekstgrænseflade.\n"
-"\n"
-" * 'LILO med grafisk menu': hvis du foretrækker LILO med "
-"grafikgrænseflade.\n"
-"\n"
-" * 'Opstartsenhed': I de fleste tilfælde vil det ikke være nűdvendigt at "
-"ændre standard (/dev/hda), men hvis du foretrækker det, kan "
-"opstartsindlæseren installeres pć det andet diskdrev (/dev/hdb), eller endda "
-"pć en diskette (/dev/fd0).\n"
-"\n"
-" * 'Forsinkelse fűr opstart af standardsystem': Efter opstart eller genstart "
-"af maskinen er dette den tid der gives til brugeren pć konsollen til at "
-"vælge en anden opstartsindgang end den forvalgte.\n"
-"\n"
-"Vær opmærksom pć at hvis du vælger ikke at installere en opstartsindlæser "
-"(ved at vælge 'Overspring'), skal du være sikker pć at du har en anden mćde "
-"at starte dit Mandrake Linux-system op pć! Vær sikker pć hvad du gűr hvis du "
-"ændrer nogen af tilvalgene her!\n"
-"\n"
-"Et klik pć 'Avanceret'-knappen i denne dialog vil tilbyde avancerede "
-"muligheder beregnet til ekspertbrugeren."
+msgid "Choose color"
+msgstr "vælg farve"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
-msgstr ""
-"Dette er den vanskeligste beslutning omkring sikkerheden af dit GNU/Linux- "
-"system: Du skal indtaste din root-adgangskode. Root er systemadministratoren "
-"og er den eneste der har lov til at lave opdateringer, tilfűje brugere, "
-"ændre i den overordnede systemkonfiguration og sć videre. Kort sagt, root "
-"kan gűre alt! Derfor skal du vælge en adgangskode der er svær at gætte - "
-"DrakX vil fortælle dig hvis adgangskoden du valgte er for nem. Som víst er "
-"du ikke tvunget til at indtaste en adgangskode, men vi advarer dig pć det "
-"kraftigste mod dette. GNU/Linux er lige sć udsat for behandlingsfejl som "
-"andre operativsystemer. Da root kan overvinde alle forhindringer og "
-"uforvarende slette alle data pć partitioner ved sorglűst at behandle "
-"partitionerne selv, er det vigtigt at det er vanskeligt at blive root.\n"
-"\n"
-"Adgangskoden bűr være en blanding af bogstaver og tal og mindst 8 tegn "
-"langt. Skriv aldrig en adgangskode ned for root - det gűr det for nemt at "
-"bryde ind i et system.\n"
-"\n"
-"Gűr dog ikke adgangskoden for lang eller kompliceret da du skal være i stand "
-"til at huske den uden for stort besvær!\n"
-"\n"
-"Adgangskoden vil ikke blive vist pć skærmen nćr du indtaster den. Du skal "
-"derfor indtaste adgangskoden to gange, for at begrænse risikoen for "
-"tastefejl. Hvis du kommer til at lave den samme tastefejl to gange, vil "
-"denne 'ukorrekte' adgangskode være krævet den fűrste gang du forbinder dig "
-"til systemet.\n"
-"\n"
-"Hvis du űnsker at adgang til denne maskine skal være styret af en "
-"autenticerings-server, sć klik pć Avanceret-knappen.\n"
-"\n"
-"Hvis dit netværk bruger LDAP, NIS eller PDC Windows domæne-"
-"autentificeringstjenester, vælg da den rigtige som 'autentificering'. Hvis "
-"du ikke véd hvilken der skal bruges, sć spűrg din systemadministrator.\n"
-"\n"
-"Hvis du har problemer med at huske adgangskoder, sć kan du vælge 'Ingen "
-"adgangskoder' hvis din maskine ikke vil være forbundet til Internettet, og "
-"du stoler pć alle som kan fć adgang til maskinen. "
+msgid "Dominican Republic"
+msgstr "Dominikanske Republik"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Vælg den rigtige port. For eksempel er navnet for COM1-porten under MS "
-"Windows 'ttyS0' under GNU/Linux."
+msgid "Swaziland"
+msgstr "Swaziland"
-#: ../../help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
-msgstr ""
-"Normalt har DrakX ingen problemer med at finde ud af hvor mange knapper du "
-"har pć din mus. Den antager at du har en to-knapsmus og vil lave en "
-"opsætning hvor den tredje knap emuleres. Den tredje knap for en to-knaps mus "
-"emuleres ved at trykke pć den venstre og hűjre museknap samtidigt. DrakX vil "
-"automatisk vide om din mus bruger et PS/2 eller et USB-grænsesnit.\n"
-"\n"
-"Hvis du űnsker en anden type mus, vælg da den rigtige type mus fra den viste "
-"liste.\n"
-"\n"
-"Hvis du vælger en mus forskellig fra den forvalgte, vil du blive præsenteret "
-"for en skærm for museafprűvning. Brug knapperne og hjulet for at efterprűve, "
-"om indstillerne er korrekte, og at musen virker korrekt. Hvis musen ikke "
-"virker korrekt, tryk da pć mellemrumstangenten eller vognretur for at "
-"annullere testen og gć tilbage til listen med valg.\n"
-"\n"
-"Mus med hjul findes til tider ikke automatisk., sć du vil behűve at vælge "
-"din mus fra en liste. Forsikr dig om at du vælger den der passer til porten "
-"som din mus er tilsluttet. Efter valg af en mus og tryknin pć 'Næste ->'-"
-"knappen vises et billede med en mus pć skærmen. Rul med musehjulet for at "
-"forsikre dig om at det aktiveres korrekt. Nćr du har set at musehjulet pć "
-"skærmen bevæger sig som du ruller med musehjulet, sć afprűv museknapperne og "
-"tjek at musemarkűren flytter sig nćr du flytter pć musen."
+msgid "Set-UID"
+msgstr "Set-UID"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
-msgstr ""
-"Dit valg af foretrukkent sprog vil pćvirke sproget for dokumentationen, "
-"installeringen og systemet generelt. Vælg fűrst den verdensdel du befinder "
-"dig i, og sć det sprog, du taler.\n"
-"\n"
-"Hvis du klikker pć Avanceret-knappen kan du vælge andre sprog, der "
-"installeres pć maskinen, og derved installeres de sprogspecifikke filer for "
-"systemdokumentation og programmer. Hvis du for eksempel beværter folk fra "
-"Spanien pć din maskine, vælg da engelsk som standardsproget i træ-visningen, "
-"og 'Espańol' i den avancerede afdeling.\n"
-"\n"
-"Bemærk at du ikke er begrænset til at vælge et enkelt yderligere sprog. Du "
-"kan vælge flere sprog, eller endog installere dem alle ved at markere 'Alle "
-"sprog'-boksen. Valg af understűttelse for et sprog betyder at oversættelser, "
-"skrifttyper, stavekontrol mv for dette sprog bliver installeret. Ydermere "
-"vil 'Brug ISO 10646 som standard'-boksen gűre at systemet tvinges til at "
-"bruge ISO 10646 (UTF-8). Bemærk dog at dette er en eksperimentel facilitet. "
-"Hvis du vælger forskellige sprog der kræver forskellige kodninger, vil ISO "
-"10646-understűttelse blive installeret under alle omstændigheder.\n"
-"\n"
-"For at skifte mellem de forskellige sprog installeret pć systemet kan du "
-"starte programmet '/usr/sbin/localedrake' som 'root' for at ændre det sprog "
-"der bruges af hele systemet. Kűrsel af dette program som almindelig bruger "
-"vil kun ændre sprogindstillingerne for denne bruger."
+msgid "Please check if you are using CDRW media"
+msgstr "Markér om du bruger et CDRW-medie"
#: ../../help.pm:1
#, c-format
msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
msgstr ""
-"Afhængigt af det foretrukne sprog du har valgt vil DrakX automatisk vælge en "
-"bestemt type tastatur. Men du har mćske ikke et tastatur som svarer "
-"nűjagtigt til dit sprog: for eksempel hvis du er en engelsktalende svejtser, "
-"vil du mćske stadig űnske at dit tastatur skal være et svejtsisk tastatur. "
-"Eller hvis du taler engelsk men bor i Québec, er du mćske i samme "
-"situation, hvor dit modersmćl og tastatur ikke passer sammen. I begge "
-"tilfælde giver dette installationstrin mulighed for at vælge et passende "
-"tastatur fra listen.\n"
-"\n"
-"Klik pć 'mere'-tasten for at blive præsenteret for den fulde \n"
-"liste af understűttede tastaturer.\n"
-"\n"
-"Hvis du vælger en tastaturudlægning baseret pć et ikke-latinsk alfabet, vil "
-"den næste dialog give dig mulighed for at vælge den tastekombination, der "
-"vil skifte mellem den latinske og den ikke-latinske udlægning."
+"Vælg det diskdrev som du vil slette for at installere din nye Mandrake Linux "
+"partition. Vær forsigtig, alle data som er pć denne partition vil gć tabt og "
+"vil ikke kunne genskabes!"
-#: ../../help.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
-"Dette trin bliver kun aktiveret hvis der bliver fundet en eksisterende\n"
-"GNU/Linux partition pć din maskine.\n"
-"\n"
-"DrakX skal vide om du vil udfűre en ny installation eller en opgradering\n"
-"af et eksisterende Mandrake Linux-system.\n"
-"\n"
-" * \"Installér\": Dette vil stort sét slette hele det gamle system. Hvis du\n"
-"űnsker at ændre hvordan diskene bliver partitioneret, eller ændre pć\n"
-"filsystemene, bűr du vælge dette. Afhængigt af hvordan du partitionerer kan\n"
-"nogen af de gamle data eventuelt beholdes. \n"
-"\n"
-" * \"Opgradér\": Denne installationsklasse lader dig opgradere pakkene som\n"
-"er installeret pć dit nuværende Mandrake Linux-system. Dine nuværende\n"
-"partitioner og brugerdata bliver ikke berűrt. De fleste andre "
-"konfigurationstrin\n"
-"forbliver tilgængelige, i lighed med en standardinstallation.\n"
-"\n"
-"\"Opgradér\"-valget bűr fungere pć Mandrake Linux-systemer som kűrer\n"
-"version 8.1 eller nyere. Opgradering af versioner tidligere end 8.1 er ikke\n"
-"anbefalet. "
+msgid " on parallel port \\#%s"
+msgstr " pć parallelport \\#%s"
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
-"'Land': Tjek det aktuelle valg af land. Hvis du ikke er i dette land, sć "
-"klik pć 'Konfigurér'-knappen og vælg et andet. Hvis dit land ikke er pć den "
-"fűrste liste der vistes, sć klik pć 'Mere'-knappen for at fć den komplette "
-"liste over lande."
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "Brug tasterne %c og %c til at vælge mellem mulighederne."
-#: ../../help.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Mere end én Microsoft Windows partition er blevet genkendt pć dit diskdrev. "
-"Vælg den som du űnsker at ændre stűrrelse pć for at kunne installere dit nye "
-"Mandrake Linux operativsystem.\n"
-"\n"
-"Hver partition er listet som fűlger: 'Linux navn', 'Windows navn', "
-"'Kapacitet'.\n"
-"\n"
-"'Linux navn' er kodet som fűlger: 'drevtype', 'drevnummer', "
-"'partitionsnummer' (for eksempel '/hda1').\n"
-"\n"
-"'drevtype' er 'hd' hvis dit diskdrev er et IDE drev, og 'sd' hvis det er et "
-"SCSI drev.\n"
-"\n"
-"'drevnummer' er altid et bogstav efter 'hd' eller 'sd'. For IDE drev:\n"
-"\n"
-" * 'a' betyder 'hoved-drev pć den primære IDE controller',\n"
-"\n"
-" * 'b' betyder 'slave-drev pć den primære IDE controller',\n"
-"\n"
-" * 'c' betyder 'hoved-drev pć den sækundære IDE controller',\n"
-"\n"
-" * 'd' betyder 'slave-drev pć den sækundære IDE controller'.\n"
-"\n"
-"For SCSI drev betyder 'a' det 'fűrste drev', 'b' betyder det 'andet drev', "
-"osv.\n"
-"\n"
-"'Windows navn' er det bogstav som dit drev har under Windows (den fűrste\n"
-"disk eller partition kaldes 'C:')."
+msgid "Generic 2 Button Mouse"
+msgstr "Standard 2-knaps mus"
-#: ../../help.pm:1
+#: ../../lvm.pm:1
#, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Nu skal du vælge hvor Mandrake Linux skal installeres. Hvis partitionerne "
-"allerede er lavet, enten fra en tidligere installation af GNU/Linux eller "
-"fra et andet partitioneringsværktűj), kan du bruge dem. Ellers skal disk-"
-"partitionerne laves fűrst.\n"
-"\n"
-"For at lave partitioner skal du fűrst vælge en harddisk. Du kan vælge disken "
-"der skal partitioneres ved at trykke pć \"hda\" for den fűrste IDE disk, "
-"\"hdb\" for den anden eller \"sda\" for den fűrste SCSI disk og sć videre.\n"
-"\n"
-"For at partitionere den valgte disk kan du bruge disse muligheder:\n"
-"\n"
-" * 'Slet alt': Dette valg sletter alle partitioner pć den valgte disk.\n"
-"\n"
-" * 'Allokér automatisk': dette valg tillader dig automatisk at lave Ext3 og "
-"swappartitioner pć den fri plads pć din disk.\n"
-"\n"
-"* 'Mere': giver adgang til flere faciliteter:\n"
-"\n"
-" * 'Gem partitionstabel': Gemmer din partitionstabel pć en diskette. "
-"Nyttigt ved senere redning af partitionstabellen, om nűdvendigt. Det "
-"anbefales meget at du bruger dette trin.\n"
-"\n"
-" * 'Genskab partitionstabel': lader dig genskabe en tidligere gemt "
-"partitionstabel fra diskette.\n"
-"\n"
-" * 'Red partitionstabel': hvis din partitionstabel er beskadiget, kan du "
-"prűve at redde den med denne mulighed. Vær forsigtig og husk at det ikke "
-"altid virker.\n"
-" * 'Genindlæs partitionstabel': forkaster alle ændringer og genindlæser "
-"partitionstabellen som oprindeligt lć pć disken\n"
-"\n"
-" * 'Automatisk montering af flytbart medie': fravalg af denne mulighed "
-"vil tvinge brugere til at manuelt montere og afmontere media sćsom disketter "
-"og cdrommer\n"
-"\n"
-" * 'Vejleder': Hvis du űnsker at bruge vejlederen til at partitionere din "
-"disk, kan du bruge denne mulighed. Dette anbefales, hvis du ikke har den "
-"store forstćelse om partitionering\n"
-"\n"
-" * 'Fortryd': Du kan bruge denne mulighed for at annullere dine ændringer\n"
-"\n"
-" * 'Skift mellem normal og ekspert-version': giver mulighed for flere "
-"handlinger med partitioner (type, valgmuligheder, format) og giver mere "
-"information om diskdrevet\n"
-"\n"
-" * 'Færdig': nćr du er færdig med partitionering af din disk, dette vil "
-"skrive ændringerne tilbage pć disken.\n"
-"\n"
-"Ved definering af en partitionsstűrrelse kan du finjustere denne ved at "
-"bruge piletasterne pć tastaturet.\n"
-"\n"
-"Bemærk: du kan nć enhver valgmulighed ved brug af tastaturet: navigér gennem "
-"partitionerne med Tab og op- og ned-pilene.\n"
-"\n"
-"Nćr en partition er valgt kan du bruge:\n"
-"\n"
-" * Ctrl-c for at lave en ny partition (Nćr en tom partition er valgt)\n"
-"\n"
-" * Ctrl-d for at slette en partition\n"
-"\n"
-" * Ctrl-m for at sætte et monteringssti\n"
-"\n"
-"For at fć information om de forskellige tilgængelige filsystemstyper kan du "
-"læse kapitlet ext2fs i 'Referencemanualen'.\n"
-"\n"
-"Hvis du er i gang med at installere pć en PPC-maskine skal du lave en lille "
-"HFS-'bootstrap'-partition pć mindst 1MB til Yaboot-systemstarteren. Hvis du "
-"vælger at lave partitionen en smule stűrre, f.eks. 50MB kan den være nyttig "
-"til at gemme en ekstra kerne og ramdisk-billede for nűdsituationer ved "
-"opstart."
+msgid "Remove the logical volumes first\n"
+msgstr "Fjern de logiske delarkiver fűrst\n"
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Nu vil DrakX give dig mulighed for at vælge det űnskede sikkerhedsniveau for "
-"maskinen. Hovedreglen er at sikkerhedsniveauet bűr sættes hűjere, hvis "
-"maskinen skal indeholde vigtige data, eller hvis makinen vil være direkte "
-"offentligt pć Internettet. Men et hűjere sikkerhedsniveau vindes normalt pć "
-"bekostning af letheden af anvendelsen.\n"
-"\n"
-"Hvis du ikke véd hvad du skal vælge, sć behold den foreslćede mulighed."
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "Den fremhævede mulighed vil blive startet automatisk om %d sekunder."
-#: ../../help.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
msgstr ""
-"Pć det tidspunkt hvor du installerer Mandrake Linux er det sandsynligt at "
-"nogen af pakkerne er blevet opdaterede siden den oprindelige udgivelse. Fejl "
-"er mćske blevet rettet, og sikkerhedsproblemer mćske lűst. Det er nu muligt "
-"for dig at hente disse ned fra internettet for at disse opdateringer kan "
-"komme dig til gode. Vælg 'Ja' hvis du har en fungerende internet- "
-"forbindelse eller 'Nej' hvis du foretrækker at installere opdaterede pakker "
-"senere.\n"
-"\n"
-"Valg af 'Ja' viser en liste af steder hvorfra opdateringer kan hentes. Vælg "
-"en der er nær ved dig. Sć vil et træ med pakkevalg fremkomme: gennemse "
-"valget og tryk 'Installér' for at modtage og installere den valgte pakke "
-"eller 'Annullér'for at afbryde."
+"Kan ikke skrive /etc/sysconfig/bootsplash\n"
+"Fil ikke fundet."
-#: ../../help.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet access"
+msgstr "Internetadgang"
+
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Enhver partition der netop er blevet defineret, skal formateres til brug "
-"(formatering betyder oprettelse af et filsystem).\n"
-"\n"
-"Nu kan du ogsć űnske at omformatere nogle allerede eksisterende partitioner "
-"for at slette de data som de indeholder. Hvis du űnsker dette, sć markér "
-"ogsć de partitioner som du űnsker at formatere.\n"
-"\n"
-"Bemærk at det ikke er nűdvendigt at omformatere alle allerede eksisterende "
-"partitioner. Det er nűdvendigt at omformatere de partitioner, der indeholder "
-"operativsystemet (sćsom '/', '/usr' og '/var', men du er ikke nűdt til at "
-"omformatere partitioner som du űnsker at beholde (typisk /home).\n"
-"\n"
-"Vær forsigtig med valg af partitioner; efter formatering vil alle data være "
-"slettede pć de valgte partitioner, og du vil ikke kunne redde nogetsomhelst "
-"af det.\n"
-"\n"
-"Klik pć 'Næste ->' nćr du er klar til at formatere partitioner.\n"
-"\n"
-"Klik pć '<- Forrige' hvis du űnsker at vælge andre partitioner til at "
-"installere dit nye Mandrake Linux operativsystem.\n"
-"\n"
-"Klik pć 'Avanceret' for at vælge partitioner som du űnsker at tjekke for "
-"dćrlige blokke."
+"y coordinate of text box\n"
+"in number of characters"
+msgstr "antal tegn i tekstrudens y-led"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
msgstr ""
-"Værsgo'. Installationen en nu færdig og dit GNU/Linux-system er nu klar til "
-"brug. Klik bare 'Næste ->' for at genstarte systemet. Den fűrste ting, som "
-"du burde se, efter din maskine har lavet sine test af maskinel, er "
-"opstartsmenuen, som giver dig valg af det operativsystem der skal startes.\n"
-"\n"
-"'Avanceret'-knappen viser to ekstra knapper for at:\n"
-"\n"
-" * 'generere en auto-installeringsdiskette': for at oprette en "
-"installerings- diskette, som automatisk vil udfűre en hel installation uden "
-"hjælp fra en operatűr, magen til den installation du lige har konfigureret.\n"
-"\n"
-" Bemærk at to forskellige muligheder er tilstede efter klik pć knappen:\n"
-"\n"
-" * 'Genafspil': Dette er en delvist automatiseret installering. "
-"Partitioneringstrinnet er den eneste interaktive procedure.\n"
-"\n"
-" * 'Automatisk': Fuldautomatisk installering: harddisken bliver "
-"fuldstændig genoverskrevet, alle data forsvinder.\n"
-"\n"
-" Denne facilitet er meget nyttig ved installering af et antal lignende "
-"maskiner. Se afsnittet om autoinstallering pć vores websted for yderligere "
-"oplysninger.\n"
-"\n"
-" * 'Gem pakkevalg'(*): Gemmer en liste med pakkevalget. For at bruge dette "
-"pakkevalg i en anden installation kan disketten indsættes i drevet og "
-"installeringen kan startes. Brug [F1]-tasten pć opstartsskærmen og indtast "
-">>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) Du skal have en diskette formateret til FAT (denne oprettes i GNU/Linux "
-"ved at skive \"mformat a:\")"
+"For at fć en liste af tilgængelige muligheder for den aktuelle printer kan "
+"du klikke pć knappen 'Liste med printermuligheder'."
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Enabling servers..."
+msgstr "Aktiverer servere..."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing test page(s)..."
+msgstr "Udskriver testsider..."
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "There is already a partition with mount point %s\n"
+msgstr "Der findes allerede en partition med monterings-sti %s\n"
#: ../../help.pm:1
#, c-format
@@ -2293,51 +2177,49 @@ msgid ""
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
msgstr ""
"Nu skal du vælge hvor pć din harddisk du vil installere dit Mandrake Linux-"
"operativsystem. Hvis disken er tom eller et eksisterende operativsystem "
@@ -2354,326 +2236,179 @@ msgstr ""
"\n"
"Afhængig af din disks konfiguration er flere muligheder tilstede:\n"
"\n"
-" * 'Brug fri plads': Denne mulighed vil udfűre en automatisk opdeling af den "
-"ledige diskplads. Hvis du bruger denne mulighed vil du ikke blive spurgt om "
-"mere.\n"
-"\n"
-" * 'Brug eksisterende partition': vejlederen har fundet en eller flere "
-"eksisterende Linux-partitioner pć din harddisk. Hvis du vil bruge dem, sć "
-"vælg denne mulighed. Du vil sć blive spurgt om monteringspunkter tilknyttet "
-"hver af partitionerne. De gamle monteringspunkter er forvalgt og i de fleste "
-"tilfælde er det en god idé at beholde dem.\n"
-"\n"
-" * 'Brug den fri plads pć Windows-partitionen': hvis Microsoft Windows er "
-"installeret pć din disk og bruger al pladsen, bliver du nűdt til at lave fri "
-"plads til Linux-data. For at gűre det kan du slette dine Microsoft Windows "
-"partitioner og data (se \"Slet hele disken\") eller ændre stűrrelsen pć din "
-"Microsoft Windows-FAT-partition. Stűrrelsesændringen kan fortages uden tab "
-"af data, hvis du i forvejen har defragmenteret Windows-partitionen. Denne "
-"lűsning er anbefalet hvis du vil bruge bćde Mandrake Linux og Microsoft "
-"Windows pć samme maskine.\n"
+" * '%s': Denne mulighed vil udfűre en automatisk opdeling af den ledige "
+"diskplads. Hvis du bruger denne mulighed vil du ikke blive spurgt om mere.\n"
+"\n"
+" * '%s': vejlederen har fundet en eller flere eksisterende Linux-partitioner "
+"pć din harddisk. Hvis du vil bruge dem, sć vælg denne mulighed. Du vil sć "
+"blive spurgt om monteringspunkter tilknyttet hver af partitionerne. De gamle "
+"monteringspunkter er forvalgt og i de fleste tilfælde er det en god idé at "
+"beholde dem.\n"
+"\n"
+" * '%s': hvis Microsoft Windows er installeret pć din disk og bruger al "
+"pladsen, bliver du nűdt til at lave fri plads til Linux-data. For at gűre "
+"det kan du slette dine Microsoft Windows partitioner og data (se \"Slet hele "
+"disken\") eller ændre stűrrelsen pć din Microsoft Windows-FAT-partition. "
+"Stűrrelsesændringen kan fortages uden tab af data, hvis du i forvejen har "
+"defragmenteret Windows-partitionen. Denne lűsning er anbefalet hvis du vil "
+"bruge bćde Mandrake Linux og Microsoft Windows pć samme maskine.\n"
"\n"
" Fűr du vælger denne lűsning, bűr du forstć at stűrrelsen pć din Microsoft "
"Windows partition vil blive mindre end da du startede. Du vil have mindre "
"fri plads under Microsoft Windows til at gemme dine data eller installere "
"nyt programmel.\n"
"\n"
-" * 'Slet hele disken': hvis du vil slette alle data pć alle partitioner pć "
-"denne disk og erstatte dem med dit nye Mandrake Linux-system, kan du vælge "
-"denne mulighed. Vær forsigtig med denne lűsning, du vil ikke være i stand "
-"til at fortryde dine ændringer efter at du har sagt ja.\n"
+" * '%s': hvis du vil slette alle data pć alle partitioner pć denne disk og "
+"erstatte dem med dit nye Mandrake Linux-system, kan du vælge denne mulighed. "
+"Vær forsigtig med denne lűsning, du vil ikke være i stand til at fortryde "
+"dine ændringer efter at du har sagt ja.\n"
"\n"
" !! Hvis du bruger denne mulighed vil alle eksisterende data pć din disk "
"gć tabt. !!\n"
"\n"
-" * 'Fjern Windows': dette vil simpelthen slette alt pć disken og begynde fra "
-"en frisk, og partitionere fra ny. Alle data pć din disk vil gć tabt.\n"
+" * '%s': dette vil simpelthen slette alt pć disken og begynde fra en frisk, "
+"og partitionere fra ny. Alle data pć din disk vil gć tabt.\n"
"\n"
" !! Hvis du bruger denne mulighed vil alle eksisterende data pć din disk "
"gć tabt. !!\n"
"\n"
-" * 'Tilret diskpartitioner': vælg denne mulighed hvis du vil partitionere "
-"disken i hćnden. Vær forsigtig - det er en stærk , men ogsć farlig mulighed. "
-"og du kan meget nemt komme til at slette alle dine data. Derfor er denne "
-"mulighed kun anbefalet hvis du har lavet noget lignende fűr. For at fć viden "
-"om brugen af DiskDrake-programmet kan du se i afsnittet 'Administrér dine "
-"partitioner' i 'Startervejledningen'."
+" * '%s': vælg denne mulighed hvis du vil partitionere disken i hćnden. Vær "
+"forsigtig - det er en stærk , men ogsć farlig mulighed. og du kan meget nemt "
+"komme til at slette alle dine data. Derfor er denne mulighed kun anbefalet "
+"hvis du har lavet noget lignende fűr. For at fć viden om brugen af DiskDrake-"
+"programmet kan du se i afsnittet 'Administrér dine partitioner' i "
+"'Startervejledningen'."
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Til sidst vil du blive spurgt om du űnsker at se den grafiske grænseflade "
-"ved opstart. Bemærk at du vil blive spurgt om dette selvom du har valgt ikke "
-"at afprűve konfigurationen. Selvfűlgelig vil du űnske at svare Nej, hvis din "
-"maskine skal bruges som server, eller hvis ikke lykkedes dig at fć skærmen "
-"konfigureret."
+msgid "Ukraine"
+msgstr "Ukraine"
-#: ../../help.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
-"I tilfælde af at forskellige drivere er tilgængelige til dit kort, med eller "
-"uden 3D-accelleration, bliver du foreslćet at vælge den server der bedst "
-"opfylder dine behov."
+msgid "Application:"
+msgstr "Applikation:"
-#: ../../help.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
-msgstr ""
-"Oplűsning\n"
-"\n"
-" Du kan hér vælge oplűsninger og farvedybder ud af de tilgængelige "
-"muligheder for dit udstyr. Vælg dem som bedst opfylder dine behov (du vil "
-"dog kunne ændre dette efter installationen). Et eksempel pć den valgte "
-"konfiguration vil blive vist pć skærmen."
+msgid "External ISDN modem"
+msgstr "Eksternt ISDN modem"
-#: ../../help.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
-msgstr ""
-"Skærm\n"
-"\n"
-" Installationsprogrammet kan normalt automatisk finde ud af at konfigurere "
-"skærmen tilsluttet din maskine. Hvis dette ikke er tilfældet kan du i denne "
-"liste vælge den skærm du faktisk har."
+msgid "if set to yes, report check result by mail."
+msgstr "hvis sat til ja, sć rapportér kontrolresultat per epost."
-#: ../../help.pm:1
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Your choice? (default %s) "
+msgstr "Dit valg? (standard %s) "
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
+msgstr "Problemlűsning"
+
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid " / Region"
+msgstr " / Region"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
+"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
-"Test\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
"\n"
-"Options\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
-" You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
-"X (for X Window System) er hjertet af GNU/Linux' grafiske grænseflade som "
-"alle de grafiske miljűer (KDE, GNOME, AfterStep, WindowMaker, mv.) der "
-"kommer sammen med Mandrake Linux afhænger af.\n"
-"\n"
-"Du vil blive vist en liste med forskellige parametre der kan ændres for at "
-"fć den bedst mulige grafiske fremvisning:\n"
-"\n"
-"Grafikkort\n"
-"\n"
-" Installationsprogrammet kan normalt automatisk finde ud af at konfigurere "
-"grafikkortet installeret pć din maskine. Hvis dette ikke er tilfældet kan du "
-"i denne liste vælge det kort du faktisk har.\n"
-" I tilfælde af at forskellige drivere er tilgængelige til dit kort, med "
-"eller uden 3D-accelleration, bliver du foreslćet at vælge den server der "
-"bedst opfylder dine behov.\n"
-"\n"
-"\n"
-"Skærm\n"
-"\n"
-" Installationsprogrammet kan normalt automatisk finde ud af at konfigurere "
-"skærmen tilsluttet din maskine. Hvis dette ikke er tilfældet kan du i denne "
-"liste vælge den skærm du faktisk har.\n"
-"\n"
-"\n"
-"Oplűsning\n"
-"\n"
-" Du kan hér vælge oplűsninger og farvedybder ud af de tilgængelige "
-"muligheder for dit udstyr. Vælg dem som bedst opfylder dine behov (du vil "
-"dog kunne ændre dette efter installationen). Et eksempel pć den valgte "
-"konfiguration vil blive vist pć skærmen.\n"
-"\n"
-"\n"
-"Test\n"
+"Den klassiske metode for at fejlsűge lydopsætningten er at kűre fűlgende\n"
+"kommandoer:\n"
"\n"
-" Systemet vil prűve at ćbne en grafisk skærm i den űnskede oplűsning. Hvis "
-"du kan se beskeden under afprűvningen og svarer 'Ja', sć vil DrakX gć videre "
-"til næste trin. Hvis du ikke kan se beskeden, betyder det at en del af den "
-"automatisk fundne konfiguration var forkert og testen vil automatisk slutte "
-"efter 12 sekunder, og bringe dig tilbage til menuen. Ændr indstillingerne "
-"til du fćr en korrekt grafisk fremvisning.\n"
+"- \"lspcidrake -v | fgrep AUDIO\" vil vise hvilken driver lydkortet bruger \n"
+"som standard\n"
+"- \"grep sound-slot /etc/modules.conf\" vil vise hvilken driver som er i "
+"brug\n"
"\n"
+"- \"/sbin/lsmod\" lader dig se om denne driver er indlæst\n"
"\n"
+"- \"/sbin/chkconfig --list sound\" og \"/sbin/chkconfig --list alsa\" vil\n"
+"vise om disse tjenester er sat op til at startes.\n"
"\n"
-"Valgmuligheder\n"
+"- \"aumix -q\" vil vise om lyden er slukket ned eller ikke\n"
"\n"
-" Du kan hér vælge om du űnsker at din maskine automatisk skal skifte til "
-"en grafisk grænseflade ved opstart. Selvfűlgelig vil du űnske at svare Nej, "
-"hvis din maskine skal bruges som server, eller hvis ikke lykkedes dig at fć "
-"skærmen konfigureret. You can here choose whether you want to have your "
-"machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
+"- \"/sbin/fuser -v /dev/dsp\" vil vise hvilke programmer som bruger "
+"lydkortet\n"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
msgstr ""
-" Installationsprogrammet kan normalt automatisk finde ud af at konfigurere "
-"grafikkortet installeret pć din maskine. Hvis dette ikke er tilfældet kan du "
-"i denne liste vælge det kort du faktisk har.\n"
-" I tilfælde af at forskellige drivere er tilgængelige til dit kort, med "
-"eller uden 3D-accelleration, bliver du foreslćet at vælge den server der "
-"bedst opfylder dine behov."
+"Testsider er blevet sendt til printeren.\n"
+"Dette kan tage lidt tid fűr printeren starter.\n"
+"Udskrivningsstatus:\n"
+"%s\n"
+"\n"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
-msgstr ""
-"GNU/Linux hćndterer tiden i GMT (Greenwich Mean Time) og oversætter den til "
-"lokal tid ifűlge den tidszone du har valgt. Hvis uret pć bundkortet er sat "
-"til lokal tid, kan du deaktivere dette ved at fravælge 'Maskinens ur sat til "
-"GMT', hvilket vil lade GNU/Linux vide at systemuret og maskinens ur er i "
-"samme tidszone. Dette er nyttigt nćr maskinen ogsć bruges til andre "
-"operativsystemer som Windows.\n"
-"\n"
-"Muligheden 'Automatisk tidssynkronisering' vil automatisk tilpasse uret ved "
-"at forbinde til en ekstern tidsserver pć internettet. For at denne facilitet "
-"kan virke, skal du have en fungerende internetforbindelse. Det er bedst at "
-"vælge en tidsserver med en placering nær ved dig. Denne mulighed installerer "
-"faktisk en tidsserver som kan bruges af andre maskiner pć dit lokalnetværk."
+msgid "daily"
+msgstr "dagligt"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Denne dialog bruges til at vælge hvilke tjenester du űnsker skal startes ved "
-"opstart af maskinen.\n"
-"\n"
-"DrakX vil præsentere alle de tjenester, som er med i den aktuelle "
-"installation. Gennemse hver enkelt omhyggeligt og vælg dem fra som ikke "
-"altid er nűdvendige pć opstartstidspunktet.\n"
-"\n"
-"En kort forklarende tekst om en tjeneste bliver vist nćr den vælges. Hvis du "
-"ikke er sikker pć om en tjeneste er nyttig eller ej, er det dog sikrere at "
-"bruge den foreslćede opfűrsel.\n"
-"\n"
-"Vær specielt varsom pć dette trin hvis du planlægger at bruge maskinen som "
-"server: du vil formentlig űnske ikke at starte nogensomhelst tjeneste op som "
-"du ikke har brug for. Husk at adskillige tjenester kan være farlige hvis de "
-"er aktiveret pć en server. Vælg som hovedregel kun de tjenester som du "
-"virkelig behűver."
+msgid "and one unknown printer"
+msgstr "og en ukendt printer"
-#: ../../help.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
-"'Printer': Et klik pć 'Konfigurér'-knappen vil ćbne vejlederen for "
-"printerkonfigurering. Kig i det tilhűrende kapitel i 'Startvejledningen' for "
-"mere information om hvordan man opsætter en ny printer. Grænsefladen\n"
-"præsenteret der ligner den som bruges pć installationstidspunktet."
+msgid "Ireland"
+msgstr "Irland"
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "kernel version"
+msgstr "kerne-version"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid " Restore Configuration "
+msgstr " Genskab konfiguration "
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Is this the correct setting?"
+msgstr "Er dette den korrekte indstilling?"
#: ../../help.pm:1
#, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
@@ -2689,13 +2424,12 @@ msgid ""
msgstr ""
"Du vil nu kunne opsætte din internet- eller netværksopkobling. Hvis du "
"űnsker at forbinde din maskine til internettet eller til et lokalnetværk sć "
-"klik pć 'Næste'.\n"
+"klik pć '%s'.\n"
"\n"
"Mandrake Linux vil prűve at automatisk finde netværksenheder og modemer. "
-"Hvis denne sűgning mislykkes sć fjern markeringen i boksen 'Brug automatisk "
-"detektion' næste gang. Du kan ogsć vælge at ikke konfigurere netværket, "
-"eller gűre det senere; i sć tilfælde vil klik pć 'Annullér'-knappen fűre dig "
-"til næste trin.\n"
+"Hvis denne sűgning mislykkes sć fjern markeringen i boksen '%s' næste gang. "
+"Du kan ogsć vælge at ikke konfigurere netværket, eller gűre det senere; i sć "
+"tilfælde vil klik pć '%s'-knappen fűre dig til næste trin.\n"
"\n"
"Ved konfigurering af dit netværk er mulighederne for forbindelser: "
"almindeligt modem, ISDN-modem, ADSL-forbindelse, kabel-modem, og endelig en "
@@ -2710,4581 +2444,4338 @@ msgstr ""
"installeret og sć bruge programmet beskrevet dér til at konfigurere din "
"forbindelse."
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
-"Hvis du fortalte installeringen at du űnskede at vælge individuelle pakker, "
-"vil den vise et træ med alle pakker opdelt i grupper og undergrupper. Under "
-"gennembladring af træet kan du udvælge hele grupper, undergrupper eller "
-"individuelle pakker.\n"
-"\n"
-"Hver gang du udvælger en pakke i træet vil en beskrivelse fremkomme til "
-"hűjre for at lade dig vide formćlet med pakken. \n"
-"\n"
-"!! Nćr en server-pakke er blevet valgt, enten fordi du specielt valgte den "
-"individuelle pakke, eller fordi den var en del af en gruppe af pakker, vil "
-"du blive spurgt om at bekræfte atdu virkelig űnsker at installere disse "
-"servere. Som standard under Linux Mandrake bliver installerede servere "
-"startet op ved opstart af maskinen. Selvom de er sikre og ikke har nogen "
-"kendte problemer pć udgivelsestidspunktet for distributionen, er det absolut "
-"muligt at sikkerhedshuller opdages efter at denne version af Mandrake Linux "
-"blev færdiggjort. Hvis du ikke véd hvad en bestemt tjeneste vil gűre eller "
-"hvorfor den skal installeres, sć klik Nej her. Et klik med Ja her vil "
-"installere de nævnte servere og de vil som standard blive startet automatisk "
-"under opstarten!!\n"
-"\n"
-"Automatiske afhængigheder-valget deaktiverer advarselsdialogen, som vises "
-"hver gang installeringsprogrammet automatisk vælger en pakke for at lűse et "
-"afhængighedsproblem Nogen pakker har relationer mellem hinanden sć "
-"installation af en pakke kræver at nogen andre programmer allerede er "
-"installeret. Installationsprogrammet kan beregne hvilke pakker der er krævet "
-"for at tilfredsstille en afhængighed for at kunne færdiggűre en installation "
-"problemfrit.\n"
-"\n"
-"Det klejne disketteikon i bunden af listen muliggűr indlæsning af en "
-"pakkeliste udvalgt ved en tidligere installation. Dette er nyttigt hvis du "
-"har et antal maskiner som du űnsker at konfigurere pć samme mćde. Klik pć "
-"denne ikon vil bede dig om at indsætte en diskette tidligere frembragt ved "
-"slutningen pć en anden installation. Se rćd nr to i det sidste trin for "
-"hvordan en sćdan diskette kan laves."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Det er nu tid til at angive hvilke pakker du vil installere pć dit system. "
-"Der er tusindvis af pakker til dit Mandrake Linux system, og for at gűre det "
-"nemmere at hćndtere dem er pakker blevet placeret i grupper af lignende "
-"programmer.\n"
-"\n"
-"Pakkerne er ordnet i grupper svarende til en bestemt anvendelse af din "
-"maskine. Mandrake Linux har 4 foruddefinerede installationer tilgængelige. "
-"Du kan tænke pć installationsklasserne som beholdere for forskellige pakker. "
-"Du kan vælge og vrage programmer fra de forskellige beholdere, sć en "
-"installation af 'Arbejdsstation' kan ogsć have programmer fra "
-"udviklingsbeholderen installeret.\n"
-"\n"
-" * 'Arbejdsstation': Hvis din maskine skal bruges som en arbejdsstation, "
-"vælg da en eller flere af programmerne der er i arbejdsstationsbeholderen.\n"
-"\n"
-" * 'Udvikling': hvis du vil bruge maskinen til programmering vælg da de "
-"rigtige pakker fra beholderen.\n"
-"\n"
-" * 'Server': hvis det er planen at maskinen skal være en server, sć vælg de "
-"mere almindelige tjenester, som du űnsker at installere pć maskinen.\n"
-"\n"
-" * 'Grafisk miljű': her skal du vælge foretrukne grafiske miljű. Vælg mindst "
-"ét, hvis du űnsker at have en grafisk grænseflade tilgængelig.\n"
-"\n"
-"Ved flytning af musen over et gruppenavn vises en kort forklarende tekst om "
-"denne gruppe. Hvis du ikke vælger nogen grupper ved installation (i "
-"modsætning til en opgradering), vil en dialog komme frem som foreslćr dig "
-"forskellige former for minimal installation: \n"
-"\n"
-" * 'Med X' installerer de færrest mulige antal pakker for at fć en "
-"fungerende grafisk arbejdsstation.\n"
-"\n"
-" * 'Med basal dokumentation' installerer det basale system plus basale "
-"nytteprogrammer og tilhűrende dokumentation. Denne installation er passende "
-"til at sætte en server op.\n"
-"\n"
-" * 'Mindst mulige installering' vil installere det absolut mindst mulige "
-"antal pakker nűdvendigt for at fć et virkende Linux-system. Med denne "
-"installation fćs kun en grænseflade med kommandolinjer. Den totale stűrrelse "
-"af denne installation er 65 megabyte.\n"
-"\n"
-"Du kan afkrydse boksen 'Individuelt pakkevalg', hvilket er nyttigt, hvis du "
-"kender de tilbudte pakker godt, eller hvis du űnsker at have fuld kontrol "
-"over hvad der skal installeres.\n"
-"\n"
-"Hvis du har startet installationen i 'Opdatering'-tilstand, kan du fravælge "
-"alle grupper for at undgć at installere nogen nye pakker. Dette er nyttigt "
-"ved reparation eller opdatering af det eksisterende system."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
-msgstr ""
-"Mandrake Linux installationen er fordelt pć flere cdrom-er. DrakX véd om en "
-"valgt pakke ligger pć en anden cdrom, sć den vil udskyde den aktuelle cd og "
-"bede dig om at isætte den rigtige, om nűdvendigt."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Her er listet de eksisterende Linux-partitioner genkendt pć din disk. Du kan "
-"beholde valgene gjort af vejlederen, de er velegnede til almindelig brug. "
-"Hvis du ændrer disse valg skal du i det mindste definere en rod-partition "
-"'/'. Lad være med at vælge en for lille partition, ellers vil du ikke kunne "
-"installere nok programmel. Hvis du űnsker at lagre data pć en separat "
-"partition, skal du ogsć vælge en '/home' (kun muligt hvis du har mere end én "
-"Linux-partition). \n"
-"Hver partition er listet som fűlger: 'Navn', 'Kapacitet'.\n"
-"\n"
-"'Navn' er kodet som fűlger: 'drevtype', 'drevnummer', "
-"'partitionsnummer' (for eksempel '/hda1').\n"
-"\n"
-"'drevtype' er 'hd' hvis dit diskdrev er et IDE drev, og 'sd' hvis det er et "
-"SCSI drev.\n"
-"\n"
-"'drevnummer' er altid et bogstav efter 'hd' eller 'sd'. For IDE drev:\n"
-"\n"
-" * 'a' betyder 'hoved-drev pć den primære IDE controller',\n"
-"\n"
-" * 'b' betyder 'slave-drev pć den primære IDE controller',\n"
-"\n"
-" * 'c' betyder 'hoved-drev pć den sækundære IDE controller',\n"
-"\n"
-" * 'd' betyder 'slave-drev pć den sækundære IDE controller'.\n"
-"\n"
-"For SCSI drev betyder 'a' det 'fűrste drev', 'b' betyder det 'andet drev', "
-"osv."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
-msgstr ""
-"GNU/Linux er et flerbrugersystem, det vil sige at hver bruger kan have sine "
-"egne præferencer, sine egne filer og sć videre. Du kan læse "
-"startvejledningen for at lære mere om flerbrugersystemer.\n"
-"I modsætning til root, som er administratoren, vil brugerne som du tilfűjer "
-"her ikke have lov til at ændre nogetsomhelst undtagen deres egne filer og "
-"deres egen opsætning, hvilket beskytter systemet mod utilsigtede eller "
-"ondartede ændringer som pćvirker hele systemet. Du skal oprette i det "
-"mindste én almindelig bruger til dig selv - dette er den konto som du bűr "
-"bruge til almindelig dagligt brug. Selvom det er meget nemt at logge ind som "
-"root for at gűre alt, kan det ogsć være meget farligt!\n"
-"En fejltagelse kan betyde at dit system ikke vil virke mere. Hvis du laver "
-"en alvorlig fejltagelse som almindelig bruger, vil det værste der kan ske at "
-"du vil tabe nogen information, men det vil ikke pćvirke hele systemet.\n"
-"\n"
-"Det fűrste felt spűrger efter dit rigtige navn. Dette er naturligvis ikke "
-"krævet -du kan faktisk skrive hvad du lyster. DrakX vil bruge det fűrste ord "
-"du indtastede i boksen og kopiere det til brugernavns-feltet, hvilket er "
-"navnet, som denne bruger skal indtaste for at logge ind pć systemet. Hvis du "
-"űnsker det kan du overskrive det forvalgte of ændre brugernavnet. Det næste "
-"trin er at indtaste en adgangskode. Fra et sikkerhedsmæssigt synspunkt er "
-"adgangskoden for en ikke-priviligeret (normal) bruger er ikke sć vigtigt som "
-"det for Root, men det er ingen grund til at negligere det alligevel, ved at "
-"lade det være blankt eller at gűre det for nemt - nćr det kommer til stykket "
-"er dine egne filer der er i fare.\n"
-"\n"
-"Nćr du har klikket pć 'Acceptér bruger', kan du tilfűje andre brugere. "
-"Tilfűj en bruger for hver af dine venner: fx din far og din sűster. Nćr du "
-"har tilfűjet alle de brugere du űnsker, vælg da 'Næste ->'.\n"
-"\n"
-"Klik pć Avanceret-knappen lader dig ændre standard-skál for denne bruger\n"
-"(bash er standard). \n"
-"\n"
-"Nćr du er færdig med at tilfűje alle brugere, vil du blive spurgt om at "
-"vælge en bruger som automatisk kan logge ind pć systemet nćr maskinen "
-"startes op. Hvis du er interesseret i denne facilitet (og ikke kærer dig "
-"synderligt om lokal sikkerhed), sć vælg den űnskede bruger og "
-"vindueshćndtering og klik 'Næste ->'.\n"
-"Hvis du ikke er interesseret i denne facilitet, sć afmarkér boksen med "
-"'Űnsker du at bruge denne facilitet?'"
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
-msgstr ""
-"Fűr du gćr videre bűr du læse betingelserne i licensen omhyggeligt. Den "
-"omfatter hele Mandrake Linux distributionen. Hvis du er enig i alle "
-"betingelserne i den, sć klik pć 'Acceptér'-knappen. Hvis ikke, sć kan du "
-"bare slukke for maskinen."
-
-#: ../../install2.pm:1
-#, c-format
-msgid "You must also format %s"
-msgstr "Du skal ogsć formatere %s"
-
-#: ../../install2.pm:1
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Kunne ikke fć adgang til kernemoduler svarende til din kerne (fil %s "
-"mangler), dette betyder normalt at din opstartsdiskette ikke stemmer overens "
-"med installationsmediet (lav en nyere opstartsdiskette)"
-
-#: ../../install_any.pm:1
-#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Der er opstćet en fejl - der kunne ikke findes nogen gyldige enheder, hvor "
-"der kan oprettes nye filsystemer. Undersűg din maskine for at finde ćrsagen "
-"til problemet"
-
-#: ../../install_any.pm:1 ../../partition_table.pm:1
-#, c-format
-msgid "Error reading file %s"
-msgstr "Fejl ved læsning af filen %s"
-
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"For at bruge dette gemte pakkevalg, start installationen op med``linux "
-"defcfg=floppy''"
+msgid "Wizard Configuration"
+msgstr "Konfiguration med vejleder"
-#: ../../install_any.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "Denne diskette er ikke formatteret til FAT"
+msgid "Autoprobe"
+msgstr "Automatisk sondering"
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Indsæt en tom diskette i diskette-drev %s"
+msgid "Backup system files..."
+msgstr "Sikkerhedskopiér systemfiler..."
#: ../../install_any.pm:1
#, c-format
msgid "Can't use broadcast with no NIS domain"
msgstr "Kan ikke bruge rundkastning uden noget NIS-domæne"
-#: ../../install_any.pm:1
-#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-"De fűlgende pakker vil blive fjernet for at kunne opdatere systemet: %s\n"
-"\n"
-"\n"
-"Űnsker du virkelig at fjerne disse pakker?\n"
-
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No"
-msgstr "Nej"
+msgid "Removing printer \"%s\"..."
+msgstr "Fjerner printer \"%s\"..."
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Yes"
-msgstr "Ja"
+msgid "drakfloppy"
+msgstr "drakfloppy"
-#: ../../install_any.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
+"Please indicate where the auto_install.cfg file is located.\n"
"\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
-"Do you really want to install these servers?\n"
msgstr ""
-"Du har valgt fűlgende servere: %s\n"
-"\n"
-"\n"
-"Disse servere er aktiveret som standard. De har ingen kendte "
-"sikkerhedsproblemer, men nogen nye kan blive fundet. I sć tilfælde skal du "
-"opgradere sć snart som mulig.\n"
+"Angiv venligst hvor auto_install.cfg-filen er placeret.\n"
"\n"
+"Lad den være blank hvis du ikke űnsker at opsætte en automatisk "
+"installationstilstand.\n"
"\n"
-"Űnsker du virkelig at installere disse servere?\n"
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System configuration"
-msgstr "Systemkonfiguration"
-
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System installation"
-msgstr "System-installering"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Bringing down the network"
-msgstr "Lukker netværket ned"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "information level that can be obtained through the cpuid instruction"
+msgstr "Informationsniveau som kan opnćs via cpuid-instruktionen"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Bringing up the network"
-msgstr "Bringer netværket op"
+msgid "Peru"
+msgstr "Peru"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partitionering mislykkedes: %s"
+msgid " on device: %s"
+msgstr " pć enhed: %s"
#: ../../install_interactive.pm:1
#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX partitionerings-vejlederen fandt de fűlgende lűsninger:"
+msgid "Remove Windows(TM)"
+msgstr "Fjern Windows(TM)"
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "I can't find any room for installing"
-msgstr "Kan ikke finde plads til installering"
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr ""
+"Starter X-font serveren (dette er obligatorisk for at XFree skal kűre)."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
msgstr ""
-"Du kan nu partitionere %s.\n"
-"Nćr du er færdig, sć husk at gemme med 'w'"
+"De fleste af disse værdier blev fundet\n"
+"fra dit kűrende system.\n"
+"Du kan ændre dem efter behov."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Use fdisk"
-msgstr "Brug fdisk"
+msgid "Select the font file or directory and click on 'Add'"
+msgstr "Vælg skrifttypefilen eller -kataloget oh klik pć 'Tilfűj'"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Custom disk partitioning"
-msgstr "Brugerdefineret disk-opdeling"
+msgid "Madagascar"
+msgstr "Madagaskar"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Alle eksisterende partitioner og deres data vil gć tabt pć drev %s"
+msgid "Urpmi"
+msgstr "Urpmi"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Du har mere end et diskdrev, hvilken űnsker du at installere Linux pć?"
+msgid "Cron not available yet as non-root"
+msgstr "Cron er ikke tilgængelig endnu som ikke-root"
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Erase entire disk"
-msgstr "Slet hele disken"
+msgid "System"
+msgstr "System"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Fjern Windows(TM)"
+msgid "Do you want to use this feature?"
+msgstr "Űnsker du at bruge denne facilitet?"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr ""
-"Der er ingen FAT-partitioner at ændre stűrrelse pć (eller ikke nok plads "
-"tilbage)"
+msgid "Arabic"
+msgstr "Arabisk"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"\n"
+"- Options:\n"
msgstr ""
-"For at sikre dataintegritet efter ændring af stűrrelse pć partitioner \n"
-"vil filsystemtjek blive kűrt ved din næste opstart af Windows(TM)"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT stűrrelsesændring mislykkedes: %s"
+"\n"
+"- Muligheder:\n"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Resizing Windows partition"
-msgstr "Udregner Windows-filsystemets grænser"
+msgid "Password required"
+msgstr "Adgangskode krævet"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Resizing"
-msgstr "Ændrer stűrrelsen"
+msgid "%d minutes"
+msgstr "%d minutter"
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "partition %s"
-msgstr "partition %s"
+msgid "Graphics card: %s"
+msgstr "Grafikkort: %s"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Hvilken stűrrelse űnsker du at at beholde Windows pć?"
+msgid "WebDAV transfer failed!"
+msgstr "WebDAV overfűrsel mislykkedes!"
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ADVARSEL!\n"
-"\n"
-"DrakX vil nu ændre stűrrelsen pć din Windows-partition. Udvis forsigtighed: "
-"denne operation er farlig. Hvis du ikke allerede har gjort det, bűr du fűrst "
-"gć ud af denne installation, kűre scandisk under Windows (og eventuelt "
-"defrag) og sć genstarte installationen. Du bűr ogsć tage en sikkerhedskopi "
-"af dine data. Tryk pć Ok, hvis du er helt sikker."
+msgid "XFree configuration"
+msgstr "XFree konfiguration"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
-msgstr "Din Windows partition er for fragmenteret, kűr 'defrag' fűrst"
+msgid "Choose action"
+msgstr "Vælg handling"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Beregner stűrrelsen pć Windows-partitionen"
+msgid "French Polynesia"
+msgstr "Fransk Polynesien"
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
msgstr ""
-"Programmet til at ændre stűrrelse pć FAT kan ikke behandle din partition, \n"
-"den fűlgende fejl opstod: %s"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Hvilken partition űnsker du at ændre stűrrelse pć?"
+"Normalt har DrakX ingen problemer med at finde ud af hvor mange knapper du "
+"har pć din mus. Den antager at du har en to-knapsmus og vil lave en "
+"opsætning hvor den tredje knap emuleres. Den tredje knap for en to-knaps mus "
+"emuleres ved at trykke pć den venstre og hűjre museknap samtidigt. DrakX vil "
+"automatisk vide om din mus bruger et PS/2 eller et USB-grænsesnit.\n"
+"\n"
+"Hvis du űnsker en anden type mus, vælg da den rigtige type mus fra den viste "
+"liste.\n"
+"\n"
+"Hvis du vælger en mus forskellig fra den forvalgte, vil du blive præsenteret "
+"for en skærm for museafprűvning. Brug knapperne og hjulet for at efterprűve, "
+"om indstillerne er korrekte, og at musen virker korrekt. Hvis musen ikke "
+"virker korrekt, tryk da pć mellemrumstangenten eller vognretur for at "
+"annullere testen og gć tilbage til listen med valg.\n"
+"\n"
+"Mus med hjul findes til tider ikke automatisk., sć du vil behűve at vælge "
+"din mus fra en liste. Forsikr dig om at du vælger den der passer til porten "
+"som din mus er tilsluttet. Efter valg af en mus og tryknin pć '%s'-knappen "
+"vises et billede med en mus pć skærmen. Rul med musehjulet for at forsikre "
+"dig om at det aktiveres korrekt. Nćr du har set at musehjulet pć skærmen "
+"bevæger sig som du ruller med musehjulet, sć afprűv museknapperne og tjek at "
+"musemarkűren flytter sig nćr du flytter pć musen."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Brug den frie plads pć Windows-partitionen"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "Stűtter OKI 4w og kompatible winprintere."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"Der er ingen FAT-partitioner at bruge som loopback (eller ikke nok plads "
-"tilbage)"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr "Start ALSA (Advanced Linux Sound Architecture) lydsystemet"
-#: ../../install_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Swap-partitions stűrrelse i Mb: "
+msgid "Installing driver for %s card %s"
+msgstr "Installerer driver for %s kort %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Root partition size in MB: "
-msgstr "Rod-partitions stűrrelse i Mb: "
+msgid ""
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
+msgstr ""
+"Du har overfűrt din tidligere standard-printer '%s', skal den ogsć være "
+"standard-printer under det nye printersystem %s?"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Choose the sizes"
-msgstr "Vælg stűrrelserne"
+msgid "Enable Server"
+msgstr "Aktivér server"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Hvilken partition vil du benytte som Linux4Win?"
+msgid "Ukrainian"
+msgstr "Ukrainsk"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Brug Windows partitionen til Loopback"
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
+msgstr ""
+"Netværksadgangen kűrte ikke og kunne ikke startes. Tjek din konfiguration og "
+"dit udstyr. Prűv derefter at konfigurere din eksterne printer igen."
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "There is no existing partition to use"
-msgstr "Der er ingen eksisterende partition der kan bruges"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "Indsæt opstartsdisketten i diskette-drevet %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use existing partitions"
-msgstr "Brug eksisterende partition"
+msgid "Local network(s)"
+msgstr "Lokalnetværk"
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Ikke nok fri plads til at tildele nye partitioner"
+msgid "Remove Windows"
+msgstr "Fjern Windows"
-#: ../../install_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Use free space"
-msgstr "Brug fri plads"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr ""
+"Din %s er blevet konfigureret.\n"
+"Du kan nu skanne dokumenter med 'XSane' fra Multimedie/grafik i "
+"programmenuen."
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Du skal have en FAT-partition monteret under /boot/efi"
+msgid "Firewire controllers"
+msgstr "Firewire-kontrolkort"
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"You don't have a swap partition.\n"
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
"\n"
-"Continue anyway?"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
msgstr ""
-"Du har ingen Swap partition\n"
+"Efter du har konfigureret de generelle parametre for opstartsindlæseren, vil "
+"listen med opstartsmuligheder, som vil være tilgængeligt ved opstarten, "
+"blive vist.\n"
"\n"
-"Fortsæt alligevel?"
+"Hvis der er andre operativsystemer installeret pć din maskine, vil de "
+"automatisk blive tilfűjet til opstartsmenuen. Du kan finjustere de "
+"eksisterende muligheder ved at klikke '%s' for at oprette en ny indgang; "
+"vælg en indgang og klik pć '%s' eller '%s' for at ændre eller fjerne den. '%"
+"s' bekræfter dine ændringer.\n"
+"\n"
+"Mćske vil du ikke űnske at givea dgang til disse andre operativsystemer til "
+"nogensomhelst, som har adgang til konsollen og genstarter maskinen. Du kan "
+"slette de tilsvarende indgange til operativsystemerne for at fjerne dem fra "
+"opstartsindlæserens menu, men du vil sć have brug for en opstartsdiskette "
+"for at kunne starte disse andre operativsystemer op!"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Du skal have en rod partition. For at fć dette, lav en ny partition (eller "
-"vælg en eksisterende).\n"
-"Vælg sć kommandoen \"Monterings-sti\" og sæt den til `/'"
+msgid "System mode"
+msgstr "Systemtilstand"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
msgstr ""
-"Noget maskinel pć din maskine skal bruge ''proprietære'' drivere for at "
-"virke.\n"
-"Du kan finde information om dem hos: %s"
+"For at skrive til en NetWare printer skal du angive navnet pć NetWare "
+"printerserveren (bemærk at dette navn kan være forskelligt fra TCP/IP-"
+"navnet!) sćvel som kűnavnet for den printer du vil benytte samt om "
+"nűdvendigt et brugernavn og en adgangskode."
-#: ../../install_messages.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Tillykke, installationen er færdig.\n"
-"Fjern boot-mediet og tryk retur for at genstarte.\n"
-"\n"
-"\n"
-"For information om rettelser til denne udgivelse af Mandrake Linux, se "
-"Errata pć:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information om konfigurering af dit system kan du finde i kapitlet om efter-"
-"installation i den Officielle Mandrake Linux Brugervejledning."
+msgid "Netmask:"
+msgstr "Netmaske:"
-#: ../../install_messages.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr "http://www.mandrakelinux.com/en/91errata.php3"
+msgid "Append"
+msgstr "Vedhæft"
-#: ../../install_messages.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr ""
+"Opfrisk printerliste (for at vise alle tilgængelige eksterne CUPS-printere)"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
msgstr ""
+"Nćr denne valgmulighed er valgt, vil CUPS hver gang den starter forsikre sig "
+"om at\n"
"\n"
-"Advarsel\n"
-"\n"
-"Læs venligst betingelserne nedenfor omhyggeligt. Hvis du ikke er enig i alt "
-"der stćr, mć du ikke installere indholdet af CD-en. Tryk pć 'Nægt' for at "
-"fortsætte installationen uden disse cdrommer.\n"
-"\n"
+"- hvis LPD/LPRng er installeret, vil /etc/printcap ikke overskrives af CUPS\n"
"\n"
-"Visse komponenter pć den næste CD er ikke omfattet af GPL-licensen eller "
-"andre lignende licenser. Hver enkelt komponent er derfor omfattet af de "
-"betingelser der er beskrevet i dets egen licens. Læs derfor venligst "
-"betingelserne omhyggeligt og fűlg de opstillede betingelser nćr du bruger og/"
-"eller videredistribuerer komponenterne. Sćdanne licenser forhindrer normalt "
-"kopiering (sikkerhedskopiering undtaget), videredistribuering, at folk "
-"skiller programmet ad, eller ændrer i komponenterne. Ethvert brud pć "
-"licensen vil űjeblikkeligt fratage dig rettighederne beskrevet i den "
-"specifikke licens. Medmindre licensen giver dig lov hertil, vil det normalt "
-"ikke være tilladt at installere programmet pć mere end én maskine, eller "
-"bruge det pć et netværk. Hvis du er i tvivl, sć kontakt venligst producenten "
-"af komponenten direkte. Overdragelse til tredjemand eller kopiering af "
-"sćdanne komponenter inklusive dokumentationen er normalt forbudt.\n"
+"- hvis /etc/cups/cupsd.conf mangler, vil den blive oprettet\n"
"\n"
+"- nćr printerinformation rundsendes, vil den ikke indeholde \"localhost\" "
+"som servernavn.\n"
"\n"
-"Alle rettigheder til komponenterne pć CD-en tilhűrer deres respektive "
-"skabere og er beskyttet af Lov om Ophavsret.\n"
+"Hvis nogen af disse ting giver dig problemer, sć fjern denne valgmulighed, "
+"men da mć du selv sűrge for at disse punkter bliver overholdt."
-# Mangler
-#: ../../install_messages.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
-"5. Governing Laws \n"
+"It also provides a much higher API than OSS.\n"
"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
msgstr ""
-"Introduktion\n"
-"\n"
-"Operativsystemet og de forskellige komponenter tilgængelige i Mandrake Linux "
-"distributionen vil herefter blive kaldt \"programmelprodukter\". "
-"Programmelprodukterne inkluderer, men er ikke begrænset til: samlingen af "
-"værktűjer, metoder, regler og dokumentation relateret til operativsystemet "
-"og de forskellige komponenter i Mandrake Linux-distributionen.\n"
-"\n"
-"\n"
-"1. Licensaftale\n"
-"\n"
-"Læs venligst dette dokument omhyggeligt. Dette dokument er en licensaftale "
-"mellem dig og MandrakeSoft S.A., som gælder til disse programmelprodukter. "
-"Ved at installere, kopiere eller bruge disse programmelprodukter accepterer "
-"du udtrykkeligt og fuldt ud denne licensaftale med dens betingelser og "
-"regler. Hvis du er uenig i nogensomhelst del af denne licens, mister du "
-"retten til at installere, kopiere eller bruge disse programmelprodukter. "
-"Hvilket som helst forsűg pć at installere, kopiere eller bruge disse "
-"programmelprodukter pć en mćde som ikke er i overensstemmelse med "
-"betingelserne og reglerne i denne licens er ulovlig og vil betyde at du "
-"mister dine rettighedder under denne licens. Hvis dette sker, skal du med "
-"det samme űdelægge alle kopier af disse programmelprodukter.\n"
-"\n"
-"\n"
-"2. Begrænset garanti\n"
-"\n"
-"Programmelprodukterne og tilhűrende dokumenter leveres \"som de er\", uden "
-"nogen form for garanti, i den udstrækning lov tillader. MandrakeSoft S.A. "
-"vil under ingen omstændigheder undtagen hvad lov foreskriver være ansvarlig "
-"for specielle, tilfældige, direkte eller indirekte tab af nogen art "
-"(inkluderende uden begrænsninger, skader ved tab af forretning, "
-"forstyrrelser af forretning, finansielle tab, advokatbistand, erstatninger "
-"som resultat af en retssag eller nogen anden form for fűlgetab) opstćet "
-"under brugen eller mangel pć samme af disse programmelprodukter, selv hvis "
-"MandrakeSoft S.A. er blevet gjort opmærksom pć muligheden for eller "
-"indtræffelsen af sćdanne skader.\n"
-"\n"
-"BEGRÆNSET ANSVAR MED HENSYN TIL REGLER OM BESIDDELSE ELLER BRUG AF FORBUDT "
-"PROGRAMMEL I VISSE LANDE\n"
-"\n"
-"I den udstrækning som loven tillader vil MandrakeSoft S.A. eller deres "
-"distributűrer under ingen omstændigheder være ansvarlig for specielle, "
-"tilfældige, direkte eller indirekte tab af nogen art (inklusive uden "
-"begrænsninger skader ved tab af forretning, forstyrrelser af forretning, "
-"finansielle tab, advokatbistand, erstatninger som resultat af en retssag "
-"eller nogen anden form for tab) opstćet ved besiddelse eller brug af "
-"programmelkomponenter eller opstćet ved hentning af programmelkomponenter "
-"fra et af Mandrake Linux webstederne som er forbudt eller begrænset i visse "
-"lande ved lokal lov. Dette begrænsede ansvar gælder, men er ikke begrænset "
-"til, de stærke krypteringskomponenter inkluderet i programmelprodukterne.\n"
-"\n"
-"\n"
-"3. GPL-licensen og relaterede licenser\n"
-"\n"
-"Dette programmel bestćr af komponenter lavet af forskellige personer eller "
-"enheder. De fleste af disse komponenter bliver reguleret efter vilkćrene og "
-"aftalerne i GNU General Public License, herefter kaldet \"GPL\", eller "
-"lignende licenser. De fleste af disse licenser tillader dig at bruge, "
-"kopiere, tilpasse eller redistribuere komponenterne, de dækker. Læs venligst "
-"vilkćrene og betingelserne i licensaftalen for hver komponent omhyggeligt "
-"fűr du bruger det. Alle spűrgsmćl angćende en komponent bedes adresseret til "
-"komponentens forfatter og ikke til MandrakeSoft. Programmerne udviklet af "
-"MandrakeSoft S.A. bliver reguleret efter GPL-licensen. Dokumentationen "
-"skrevet af MandrakeSoft S.A. bliver reguleret efter en specifik licens. "
-"Referér venligst til dokumentationen for yderligere detaljer.\n"
-"\n"
-"\n"
-"4. Intellektuelle rettigheder\n"
-"\n"
-"Alle rettigheder til komponenterne i programmelproduktet tilhűrer deres "
-"respektive forfattere, og er beskyttet af intellektuelle rettigheds- og "
-"ophavsretslove, gældende for programmel. MandrakeSoft S.A. forbeholder sine "
-"rettigheder til at ændre eller tilpasse programmelprodukterne, helt eller "
-"delvist, med alle midler og til alle formćl. \"Mandrake\", \"Mandrake Linux"
-"\" samt de tilhűrende logoer er varemærker for MandrakeSoft S.A. \n"
+"OSS (Open Sound System) var den fűrste lyd-API. Det er den fűrste OS-"
+"uafhængige lyd-API (Den er tilgængelig pć de fleste Unix-systemer) men den "
+"er en meget basal og begrænset API.\n"
+"Ydermere genopfandt alle OSS-drivere hjulet.\n"
"\n"
+"ALSA (Advanced Linux Sound Architecture) er en modulær arkitektur som\n"
+"understűtter en ganske stor mængde ISA-, USB- og PCI-kort.\n"
"\n"
-"5. Styrende love\n"
+"Den tilbyder ogsć en meget hűjere API end OSS.\n"
"\n"
-"Hvis dele af denne aftale bliver kendt ugyldig, ulovlig eller ubrugelig ved "
-"en domstolsafgűrelse, vil disse dele blive ekskluderet fra denne kontrakt. "
-"Du vil forblive bundet af de andre gældende dele af aftalen. Vilkćrene og "
-"aftalerne i denne licens er reguleret under fransk lov. Alle uenigheder "
-"vedrűrende vilkćrene i denne licens vil fortrinsvist blive lűst udenfor "
-"domstolene. Som en sidste udvej vil uenighederne blive hćndteret ved den "
-"rette domstol i Paris, Frankrig. Ved spűrgsmćl omkring dette dokument, "
-"kontakt venligst MandrakeSoft S.A. \n"
-
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Gćr til trin `%s'\n"
-
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Help"
-msgstr "Hjælp"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "not configured"
-msgstr "ikke konfigureret"
-
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
-#, c-format
-msgid "Configure"
-msgstr "Konfigurér"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Go on anyway?"
-msgstr "Fortsæt alligevel?"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "Der opstod en fejl ved installeringen af pakkerne:"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Der opstod en fejl ved sorteringen af pakkerne:"
+"For at bruge ALSA kan man enten bruge:\n"
+"- den gamle OSS-kompatibilitetes-api\n"
+"- den nye ALSA API som tilbyder mange forbedrede faciliteter men som kræver "
+"brug af ALSA-biblioteket.\n"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Change your Cd-Rom!\n"
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
+"You may prefer to replay the installation.\n"
msgstr ""
-"Skift din cdrom!\n"
+"Autoinstallation kan ske fuldautomatisk hvis űnsket. I sć tilfælde vil den "
+"overtage hele harddisken!! (dette er beregnet til at installere pć en anden "
+"maskine).\n"
"\n"
-"Indsæt cdrom'en med navnet \"%s\" i dit cdrom-drev og tryk pć Ok, nćr det "
-"gjort\n"
-"Hvis du ikke har den sć tryk pć Annullér, sć undgćs installation fra denne cd"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Refuse"
-msgstr "Nægt"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Accept"
-msgstr "Acceptér"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Installing package %s"
-msgstr "Installerer pakke %s"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "%d packages"
-msgstr "%d pakker"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "No details"
-msgstr "Ingen detaljer"
+"Du foretrækker mćske at afspille installationen igen\n"
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Details"
-msgstr "Detaljer"
+msgid "Network printer \"%s\", port %s"
+msgstr "Netværksprinter '%s', port %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Vent venligst, forbereder installationen"
+msgid ""
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
+msgstr "Vælg hvilken netværksadapter som skal forbindes til dit lokalnet."
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Time remaining "
-msgstr "Resterende tid "
+msgid "OK to restore the other files."
+msgstr "O.k. at genskabe de andre filer."
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Estimating"
-msgstr "Beregnes"
+msgid "Please choose your keyboard layout."
+msgstr "Vælg dit tastaturlayout."
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Installing"
-msgstr "Installerer"
+msgid "Printer Device URI"
+msgstr "Printer-enheds URI"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Vælg pakker som skal installeres"
+msgid "Not erasable media!"
+msgstr "Ikke sletbart medie!"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Minimal install"
-msgstr "Minimal installation"
+msgid "Terminal-based"
+msgstr "Terminal-baseret"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Updating package selection"
-msgstr "Opdaterer pakkevalg"
+msgid "Installing a printing system in the %s security level"
+msgstr "Installerer et printersystem pć sikkerhedsniveauet %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Load/Save on floppy"
-msgstr "Indlæs/gem pć diskette"
+msgid "The user name is too long"
+msgstr "Dette brugernavn er for langt"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "<- Previous"
-msgstr "<- Forrige"
+msgid "Other OS (windows...)"
+msgstr "Andet styresystem (Windows...)"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Install"
-msgstr "Installér"
+msgid "WebDAV remote site already in sync!"
+msgstr "WebDAV eksternt netsted allerede synkroniseret!"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Show automatically selected packages"
-msgstr "Vis automatisk valgte pakker"
+msgid "Reading printer database..."
+msgstr "Læser database over printere ..."
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Du kan ikke fravælge denne pakke. Den skal opgraderes"
+msgid "Generate auto install floppy"
+msgstr "Laver autoinstallations-diskette"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
msgstr ""
-"Denne pakke skal opgraderes\n"
-"Er du sikker pć at du vil fravælge den?"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "Du kan ikke fravælge denne pakke. Den er allerede installeret"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Dette er en nűdvendig pakke, den kan ikke vælges fra"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't select/unselect this package"
-msgstr "Du kan ikke vælge/fravælge denne pakke"
+"\t\t brugernavn: %s\n"
+"\t\t pć sti: %s \n"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The following packages are going to be removed"
-msgstr "De fűlgende pakker vil blive afinstalleret"
+msgid "Somalia"
+msgstr "Somalia"
-#: ../../install_steps_gtk.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "The following packages are going to be installed"
-msgstr "De fűlgende pakker vil blive installeret"
+msgid "No open source driver"
+msgstr "Ingen open source driverrutine"
-#: ../../install_steps_gtk.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"You can't select this package as there is not enough space left to install it"
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
msgstr ""
-"Du kan ikke vælge denne pakke, da der ikke er nok plads tilbage til at "
-"installere den"
+"Baseret pć det foregćende niveau, men systemet er nu helt lukket.\n"
+"Sikkerhedsfaciliteterne er nu pć deres hűjeste niveau."
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Importance: %s\n"
-msgstr "Vigtighed: %s\n"
+msgid "Nicaragua"
+msgstr "Nicaragua"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Size: %d KB\n"
-msgstr "Stűrrelse: %d KB\n"
+msgid "New Caledonia"
+msgstr "Ny Caledonien"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Version: %s\n"
-msgstr "Version: %s\n"
+msgid "European protocol (EDSS1)"
+msgstr "Protokol for Europa (EDSS1)"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Name: %s\n"
-msgstr "Navn: %s\n"
+msgid "Video mode"
+msgstr "Videoindstilling"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bad package"
-msgstr "Dćrlig pakke"
+msgid "Please enter your email address below "
+msgstr "Indtast din adgangskode for epost nedenfor"
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other"
-msgstr "Andet"
+msgid "Oman"
+msgstr "Oman"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Total stűrrelse: %d / %d Mb"
+msgid "Network Monitoring"
+msgstr "Overvćgning af netværk"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Next ->"
-msgstr "Næste ->"
+msgid "SunOS"
+msgstr "SunOS"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Individual package selection"
-msgstr "Individuelt pakkevalg"
+msgid "New size in MB: "
+msgstr "Ny stűrrelse i Mb: "
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Package Group Selection"
-msgstr "Valg af pakkegrupper"
+msgid "Partition table type: %s\n"
+msgstr "Partitionstabel-type: %s\n"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Dit system har kun fć resurser. Du kan fć problemer med at installere\n"
-"Mandrake Linux. Hvis dette sker, kan du prűve en tekst-baseret installation "
-"i stedet\n"
-"Dette gűres ved at trykke 'F1' ved opstart fra cdrommen, og sć skrive 'text'."
+msgid "Authentication Windows Domain"
+msgstr "Autentifikations Windowsdomæne"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Save packages selection"
-msgstr "Gem pakke-valg"
+msgid "US keyboard"
+msgstr "Amerikansk"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Automated"
-msgstr "Automatisk"
+msgid "Buttons emulation"
+msgstr "Emulering af knapper"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Replay"
-msgstr "Afspil igen"
+msgid ", network printer \"%s\", port %s"
+msgstr ", netværksprinter \"%s\", port %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
"\n"
-"You may prefer to replay the installation.\n"
+"Drakbackup activities via tape:\n"
+"\n"
msgstr ""
-"Autoinstallation kan ske fuldautomatisk hvis űnsket. I sć tilfælde vil den "
-"overtage hele harddisken!! (dette er beregnet til at installere pć en anden "
-"maskine).\n"
"\n"
-"Du foretrækker mćske at afspille installationen igen\n"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Generate auto install floppy"
-msgstr "Laver autoinstallations-diskette"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Reboot"
-msgstr "Genstart"
+"Drakbackup aktiviteter via bćnd:\n"
+"\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Some steps are not completed.\n"
"\n"
-"Do you really want to quit now?"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
msgstr ""
-"Nogen dele af installationen er ikke færdig\n"
"\n"
-"Er du sikker pć du űnsker du at lukke nu?"
+"FTP forbindelsesproblem: Det var ikke muligt at sende dine backupfiler via "
+"FTP.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Creating auto install floppy..."
-msgstr "Laver autoinstallations-diskette"
+msgid "Sending Speed:"
+msgstr "Sendehastighed:"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Indsæt en tom diskette i drev %s"
+msgid "Halt bug"
+msgstr "Halt-fejl"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Du behűver mćske at ændre din Ćben Firmware opstartsenhed for at slć "
-"systemstarteren til. Hvis du ikke ser systemstarter-beskeden ved genstart, "
-"sć hold Command-Option-O-F nede og indtast:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Skriv sć: shut-down\n"
-"Ved næste opstart burde du se systemstarteren."
+msgid "Mail alert configuration"
+msgstr "Konfiguration af postpćmindelse"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Installation af opstarter mislykkedes. Den fűlgende fejl opstod:"
+msgid "Tokelau"
+msgstr "Tokelau"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Installing bootloader"
-msgstr "Installerer systemopstarter"
+msgid "Bosnian"
+msgstr "Bosnisk"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Fejl ved installation af aboot, \n"
-"forsűg at gennemtvinge installation selv om dette kan űdelægge den fűrste "
-"partition?"
+msgid "Release: "
+msgstr "Udgave: "
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Do you want to use aboot?"
-msgstr "Űnsker du at bruge aboot?"
+msgid "Connection speed"
+msgstr "Opkoblingshastighed"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
msgstr ""
-"Det virker som om du har en OldWorld eller ukendt maskine, yaboot "
-"opstartsindlæseren vil ikke virke for dig. Installationen vil fortsætte, men "
-"du skal bruge BootX eller en anden mćde til at starte din maskine."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Preparing bootloader..."
-msgstr "Forbereder opstarter..."
+"Indtast din CD-brænders enhedsnavn\n"
+" fx: 0,1,0"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Domain Admin Password"
-msgstr "Adgangskode for domæneadministrator"
+msgid "Namibia"
+msgstr "Namibia"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Domain Admin User Name"
-msgstr "Brugernavn for domæneadministrator"
+msgid "Database Server"
+msgstr "Databaseserver"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Windows Domain"
-msgstr "Windows Domain"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr ""
+"specielle kapaciteter for driveren (brændemulighed eller DVD-understűttelse)"
-#: ../../install_steps_interactive.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Authentication Windows Domain"
-msgstr "Autentifikations Windowsdomæne"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "Kan ikke tilfűje en partition til _formatéret_ RAID md%d"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"For at dette kan virke pć en W2K PDC skal du nok have administratoren til at "
-"kűre: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add og genstarte serveren.\n"
-"Du skal ogsć have et brugernavn og en adgangskode for at maskinen kan "
-"tilsluttes Windows(TM)-domænet.\n"
-"Hvis netværket ikke er aktiveret vil Drakx prűve at slutte til domænet efter "
-"trinnet med opsætning af netværk.\n"
-"Skulle denne opsætning fejle af nogen ćrsag, og domæneautentifikation ikke "
-"virke, sć kűr 'smbpasswd -j DOMAIN -U USER%%PASSWORD' med dit Windows(tm) "
-"domæne og administrators brugernavn/adgangskode, efter genstart af "
-"systemet.\n"
-"Kommandoen 'wbinfo -t' vil afprűve om dine hemmelige autentifikationsdata er "
-"i orden."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Server"
-msgstr "NIS-server"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Domain"
-msgstr "NIS-domæne"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Authentication NIS"
-msgstr "Autentificering NIS"
+"Dit kort kan have 3D acceleration understűttelse, men kun med XFree %s.\n"
+"VIGTIGT: Dette er eksperimentelt og kan fć din maskine til at lćse eller gć "
+"ned.\n"
+"Dit kort er understűttet af XFree %s som kan have bedre understűttelse i 2D."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "NIS"
-msgstr "NIS"
+msgid "Please wait, setting security options..."
+msgstr "Vent venligst, sætter sikkerhedstilvalg..."
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "LDAP Server"
-msgstr "LDAP-server"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr "Ukendt|CPH05X (bt878) [mange leverandűrer]"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "LDAP Base dn"
-msgstr "LDAP grundlæggende dn"
+msgid "Launch the graphical environment when your system starts"
+msgstr "Start X-vinduessystemet efter opstart"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Authentication LDAP"
-msgstr "Autentificering LDAP"
+msgid "hourly"
+msgstr "timeligt"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LDAP"
-msgstr "LDAP"
+msgid " Successfuly Restored on %s "
+msgstr " genskabt uden fejl pć %s "
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Local files"
-msgstr "Lokale filer"
+msgid "Making printer port available for CUPS..."
+msgstr "Gűr printerport tilgængelig for CUPS..."
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Authentication"
-msgstr "Identifikation"
+msgid "Antigua and Barbuda"
+msgstr "Antigua og Barbuda"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
+msgid ""
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""
-"Denne adgangskode er for nemt at gætte (det skal mindst være pć %d tegn)"
+"!!! Indikere at adgangskoden i systemets database er forskelligt fra\n"
+" den i TerminalServer-databasen.\n"
+"Slet/tilfűj brugeren igen il TerminalServeren for at muliggűre logind."
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No password"
-msgstr "Ingen adgangskode"
+msgid "Spanish"
+msgstr "Spansk"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Set root password"
-msgstr "Sæt root-adgangskode"
+msgid "Start"
+msgstr "Start"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
msgstr ""
-"Du har ikke konfigureret X. Er du sikker pć at du virkelig űnsker dette?"
-
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Tjenester: %d aktiverede for %d registrerede"
+"Argumenter: (arg)\n"
+"\n"
+"Aktivér/deaktivér ćbenhedstjek pć ethernetkort."
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Services"
-msgstr "Tjenester"
+msgid "Configuring applications..."
+msgstr "Konfigurerer programmer..."
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "System"
-msgstr "System"
+msgid "Normal modem connection"
+msgstr "Normal modemforbindelse"
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "%s on %s"
-msgstr "%s pć %s"
+msgid "File Selection"
+msgstr "Valg af filer"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Bootloader"
-msgstr "Systemopstarter"
+msgid ""
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+" tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+" standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
+msgstr ""
+"Hvilken ISDN-konfigurering foretrækker du?\n"
+"\n"
+"* Den gamle konfiguration bruger isdn4net. Det har stærke\n"
+" værktűjer, men det er vanskeligt at konfigurere for en nybegynder,\n"
+" og er ikke standardbaseret.\n"
+"\n"
+"' Det nye konfigurationsværktűj er enklere at forstć,\n"
+" mere standardiseret, men med færre værktűjer.\n"
+"\n"
+"Vi anbefaler den nye konfiguration.\n"
+"\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
-msgid "Boot"
-msgstr "Opstart"
+msgid "CUPS"
+msgstr "CUPS"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "disabled"
-msgstr "deaktiveret"
+msgid "Run config tool"
+msgstr "Kűr konfigurationsværktűj"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "activated"
-msgstr "aktiveret"
+msgid "Bootloader installation"
+msgstr "Systemopstarterens installation"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Firewall"
-msgstr "Brandmur"
+msgid "Root partition size in MB: "
+msgstr "Rod-partitions stűrrelse i Mb: "
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Security"
-msgstr "Sikkerhed"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "Dette er en nűdvendig pakke, den kan ikke vælges fra"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Security Level"
-msgstr "Sikkerhedsniveau"
+msgid "Etherboot ISO image is %s"
+msgstr "Etherboot ISO-aftryk er %s"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Network"
-msgstr "Netværk"
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"named (BIND) er en domæne-navneserver (DNS) der bruges til opslag af IP-"
+"adresser for værtsnavne."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Network & Internet"
-msgstr "Netværk og Internet"
+msgid "Disconnect..."
+msgstr "Afbrud..."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Graphical interface"
-msgstr "Grafisk grænseflade"
+msgid "Saint Lucia"
+msgstr "Sankt Lucia"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Hardware"
-msgstr "Udstyr"
+msgid "Report"
+msgstr "Rapport"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "TV card"
-msgstr "TV-kort"
+msgid "Palau"
+msgstr "Palau"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "Intet lydkort genkendt. Prűv at kűre \"harddrake\" efter installation"
+msgid "level"
+msgstr "niveau"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr "Kűr \"sndconfig\" efter installation for at konfigurere dit lydkort"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
+msgstr ""
+"Alle hændelser fűlges op af en teknisk kvalificeret MandrakeSoft-ekspert."
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "Har du et ISA-lydkort?"
+msgid "Package Group Selection"
+msgstr "Valg af pakkegrupper"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sound card"
-msgstr "Lydkort"
+msgid "Restore Via Network Protocol: %s"
+msgstr "Genskab via netværksprotokol: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Remote CUPS server"
-msgstr "Ekstern CUPS server"
+msgid "You can configure each parameter of the module here."
+msgstr "Du kan konfigurere hver parameter for modulet her."
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "No printer"
-msgstr "Ingen printer"
+msgid "Choose the resolution and the color depth"
+msgstr "Vælg oplűsning og farvedybde"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Printer"
-msgstr "Printer"
+msgid "Emulate third button?"
+msgstr "Emulering af tredje knap?"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mouse"
-msgstr "Mus"
+msgid ""
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
+msgstr ""
+"Du kan ikke oprette en ny partition\n"
+"(fordi du er oppe pć det maksimale antal primære partitioner)\n"
+"Fjern fűrst en primær partition og opret en udvidet partition."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Timezone"
-msgstr "Tidszone"
+msgid "Mount"
+msgstr "Montér"
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Keyboard"
-msgstr "Tastatur"
+msgid "Creating auto install floppy"
+msgstr "Laver autoinstallations-diskette"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Summary"
-msgstr "Oversigt"
+msgid "Install updates"
+msgstr "Installér opdateringer"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "NTP Server"
-msgstr "NTP-server"
+msgid "text box height"
+msgstr "hűjde pć tekstrude"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatisk tidssynkronisering (ved hjælp af NTP)"
+msgid "State"
+msgstr "Status"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Maskin-ur sat til GMT"
+msgid "Be sure a media is present for the device %s"
+msgstr "Forsikr dig at der er et medie tilstede i enheden %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which is your timezone?"
-msgstr "Hvad er din tidszone?"
+msgid "Enable multiple profiles"
+msgstr "Aktivér multiprofiler"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Would you like to try again?"
-msgstr "Vil du gerne prűve igen?"
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
+msgstr ""
+"Disse valgmuligheder kan sikkerhedskopiere og genskabe alle filer i dit /etc "
+"katalog.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Kan ikke kontakte spejl: %s"
+msgid "Local printer"
+msgstr "Lokal printer"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Kontakter spejlet for at hente listen af tilgængelige pakker"
+msgid "Files Restored..."
+msgstr "Filer genskabte..."
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Vælg det spejl hvorfra pakkerne skal hentes"
+msgid "Package selection"
+msgstr "Valg af pakker"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr ""
-"Kontakter Mandrake Linux netsted for at hente listen over tilgængelige spejle"
+msgid "Mauritania"
+msgstr "Mauretanien"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
"\n"
-"Do you want to install the updates ?"
msgstr ""
-"Du har nu mulighed for at hente opdaterede pakker som er blevet opdateret\n"
-"efter distributionen blev gjort tilgængelig.\n"
+"Jeg kan beholde din aktuelle konfiguration og antage at du allerede har sat "
+"en DHCP-server op; i sć tilfælde kontrollér da gerne at jeg har læst det "
+"netværk du bruger til dit lokalnet korrekt; jeg vil ikke genkonfigurere det "
+"og jeg vil ikke rűre ved din konfiguration af DHCP-serveren.\n"
"\n"
-"Du vil fć sikkerhedsrettelser eller fejlrettelser, men du skal have en\n"
-"internet-opkobling for at fortsætte.\n"
+"Den normale DNS-indgang er den cahcendde navneserver konfigureret pć "
+"bransmuren. Du kan eksempelvis erstatte denne med din ISPs DNS-adresse.\n"
+"\n"
+"Ellers kan jeg genkonfigurere dit grænsesnit og genkonfigurere en DHCP-"
+"server for dig.\n"
"\n"
-"Űnsker du at installere opdateringerne?"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Indsæt Opdater moduler-disketten i drev %s"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Indsæt opstartsdisketten i diskette-drevet %s"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Post-install configuration"
-msgstr "Konfiguration efter installation"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Installing package %s\n"
-"%d%%"
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
msgstr ""
-"Installerer pakke %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Preparing installation"
-msgstr "Forbereder installationen"
+"Ingen lokal printer fundet! For at installere en printer i hćnden skal du "
+"indtaste et enhedsnavn/filnavn i inddatalinjen (parallelporte: /dev/lp0, /"
+"dev/lp1 ..., svarende til LPT1:, LPT2: ..., fűrste USB-printer: /dev/usb/"
+"lp0, 2. USB-printer: /dev/usb/lp1 ...)."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cdrom med etikette '%s'"
+msgid "All primary partitions are used"
+msgstr "Alle primære partitioner er brugt"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
msgstr ""
-"Hvis du har alle cd'erne i listen nedenunder, klik Ok.\n"
-"Hvis du ikke har nogen af disse cd'er, klik Annullér.\n"
-"Hvis kun nogen cd'er mangler, fravælg dem, og klik sć Ok."
-
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
-#, c-format
-msgid "All"
-msgstr "Alt"
+"Derefter anbefaler vi at du genstarter dit X-miljű for\n"
+"at undgć problemer med det ændrede værtsnavn"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Virkelig minimal installation (specielt ingen urpmi)"
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr "automatisk opdagelse og konfigurering af maskinel ved opstart."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Med basal dokumentation (anbefalet!)"
+msgid "Installation Server Configuration"
+msgstr "Konfiguration af installations-server"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "With X"
-msgstr "Med X"
+msgid "Configuring IDE"
+msgstr "Konfigurerer IDE"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Du har ikke valgt nogen gruppe af pakker.\n"
-"Vælg den minimale installation du űnsker"
+msgid "Network functionality not configured"
+msgstr "Netværksfunktionalitet ikke konfigureret"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Type of install"
-msgstr "Installationstype"
+msgid "Configure module"
+msgstr "Konfigurér modul"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Selected size is larger than available space"
-msgstr "Valgt stűrrelse er stűrre end tilgængelig plads"
+msgid "Cocos (Keeling) Islands"
+msgstr "Kokosűerne"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "Indsæt en diskette med pakkevalget"
+msgid "Disconnecting from the Internet "
+msgstr "Afbryd forbindelse til Internettet "
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Loading from floppy"
-msgstr "Indlæser fra diskette"
+msgid "You'll need to reboot before the modification can take place"
+msgstr "Du skal genstarte maskinen for at aktivere ændringerne"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Package selection"
-msgstr "Valg af pakker"
+msgid "Provider phone number"
+msgstr "Udbyders telefonnummer"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Save on floppy"
-msgstr "Gem pć diskette"
+msgid "Host %s"
+msgstr "Vært %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Load from floppy"
-msgstr "Indlæs fra diskette"
+msgid "Armenia"
+msgstr "Armenien"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Vælg indlæs eller gem pakkevalg pć diskette.\n"
-"Formatet er det samme som for auto_install-genererede disketter."
+msgid "Fiji"
+msgstr "Fiji"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
msgstr ""
-"Dit system har ikke nok plads tilbage til en installation eller opgradering "
-"(%d > %d)"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Looking for available packages..."
-msgstr "Leder efter tilgængelige pakker"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Leder efter pakker som skal opgraderes"
+"Argumenter: (længde, antalcifre=0, antalstore=0)\n"
+"\n"
+"Sæt mindste længde for adgangskoder, mindste antal cifre og mindste antal "
+"store bogstaver "
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Looking at packages already installed..."
-msgstr "Leder efter pakker der allerede er installeret..."
+msgid "Second floppy drive"
+msgstr "Andet diskette-drev"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "Leder efter tilgængelige pakker og genopbygger rpm-database..."
+msgid "About Harddrake"
+msgstr "Om Harddrake"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "Ikke nok swap-plads til at gennemfűre installationen, tilfűj mere"
+msgid "Drive capacity"
+msgstr "Kapacitet for drevet"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
msgstr ""
-"Kontrol af filsystem %s mislykkedes. Űnsker du at reparere fejlene (bemærk, "
-"du kan miste data)"
+"Indsæt en diskette i diskettedrevet\n"
+"Alle data pć disketten vil blive slettet"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Check bad blocks?"
-msgstr "Led efter beskadigede blokke?"
+msgid "Size: %s"
+msgstr "Stűrrelse: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Vælg partitioner der skal formateres"
+msgid "Control and Shift keys simultaneously"
+msgstr "Kontrol- og skiftetaster samtidigt"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Du skal genstarte for at aktivere ændringerne i partitionstabellen"
+msgid "secondary"
+msgstr "sekundær"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Det er ikke plads for 1 MB bootstrap! Installationen vil fortsætte, men for "
-"at starte dit system op, skal du lave en bootstrap partition i DiskDrake"
+msgid "View Backup Configuration."
+msgstr "Se konfiguration af sikkerhedskopiering."
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the mount points"
-msgstr "Vælg monterings-stierne"
+msgid "if set to yes, report check result to syslog."
+msgstr "hvis sat til ja, sć rapportér kontrolresultat til syslog."
-#: ../../install_steps_interactive.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Skanner partitioner for at finde monteringspunkter"
+msgid "No password"
+msgstr "Ingen adgangskode"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No partition available"
-msgstr "ingen ledige partitioner"
+msgid "Nigeria"
+msgstr "Nigeria"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Configuring IDE"
-msgstr "Konfigurerer IDE"
+msgid "There is no existing partition to use"
+msgstr "Der er ingen eksisterende partition der kan bruges"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "IDE"
-msgstr "IDE"
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
+msgstr ""
+"De fűlgende skannere\n"
+"\n"
+"%s\n"
+"er tilgængelige pć dit system.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "Konfigurerer PCMCIA kort..."
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
+msgstr ""
+"For at skrive til en TCP eller sokkel-printer skal du angive værtsnavnet "
+"eller IP-adressen pć printeren, og eventuelt portnummer (standard er 9100). "
+"Pć HP JetDirect-servere er portnummeret normalt 9100, pć andre servere "
+"varierer det. Tjek manualen for dit udstyr."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid "Hard drive information"
+msgstr "Drev-information"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Button 3 Emulation"
-msgstr "Emulering af knap 3"
+msgid "Russian"
+msgstr "Russisk"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Button 2 Emulation"
-msgstr "Emulering af knap 2"
+msgid "Jordan"
+msgstr "Jordan"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Buttons emulation"
-msgstr "Emulering af knapper"
+msgid "Hide files"
+msgstr "Skjul filer"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Vælg hvilken seriel port din mus er forbundet til."
+msgid "Auto-detect printers connected to this machine"
+msgstr "Auto-opdagelse af printere tilsluttet denne maskine"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Mouse Port"
-msgstr "Muse-port"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgstr ""
+"XawTV er ikke installeret!\n"
+"\n"
+"\n"
+"Hvis du har et tv-kort, men DrakX hverken har fundet det (intet bttv\n"
+"eller saa7134 modul i \"/etc/modules\") eller installeret xawtv, sć indsend "
+"venligst\n"
+"resultaterne af \"lspcidrake -v -f\" til \"install\\@mandrakesoft.com\"\n"
+"med emnet \"undetected TV card\".\n"
+"\n"
+"\n"
+"Du kan installere det ved at indtaste \"urpmi xawtv\" som root, pć en "
+"kommandolinje."
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Please choose your type of mouse."
-msgstr "Vælg muse-type."
+msgid "Sorry, no floppy drive available"
+msgstr "Der er desværre ikke noget tilgængeligt diskette-drev"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Encryption key for %s"
-msgstr "Krypteringsnűgle for %s"
+msgid "Bolivia"
+msgstr "Bolivia"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Upgrade %s"
-msgstr "Opgradér %s"
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
+"Opsæt din Windows-server til at gűre printeren tilgængelig under IPP-"
+"protokollen, og opsæt udskrift fra denne maskine med '%s'-opkoblingstypen i "
+"Printerdrake.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Er dette en nyinstallation eller en opgradering?"
+msgid "Bad package"
+msgstr "Dćrlig pakke"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Install/Upgrade"
-msgstr "Installér/Opgradér"
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
+"Lav din maskine om til en stærk server med bare nogen fć klik med musen: "
+"Webserver, post, brandmur, ruter, fil- og print-server, ..."
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "Her er den komplette liste over tilgængelige tastaturer"
+msgid "DrakSec Basic Options"
+msgstr "Basale valgmuligheder for DrakSec"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Vælg dit tastaturlayout."
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program. Just type \"sndconfig\" in a console."
+msgstr ""
+"\n"
+"\n"
+"\n"
+"Bemærk: Hvis du har et ISA PnP lydkort skal du bruge programmet sndconfig. "
+"Du skal blot indtaste \"sndconfig\" i et konsol-program."
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Quit"
-msgstr "Afslut"
+msgid "Romania"
+msgstr "Rumænien"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "License agreement"
-msgstr "Licensaftale"
+msgid "choose device"
+msgstr "vælg enhed"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "An error occurred"
-msgstr "Der er opstćet en fejl"
+msgid "Canada"
+msgstr "Canada"
-#: ../../install_steps_newt.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> mellem elementer | <Space> vælger | <F12> næste skærm "
+msgid "Remove from LVM"
+msgstr "Fjern fra LVM"
-#: ../../install_steps_newt.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Installation %s"
+msgid "Timezone"
+msgstr "Tidszone"
-#: ../../install_steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No floppy drive available"
-msgstr "Intet tilgængeligt diskettedrev"
+msgid "German"
+msgstr "Tysk"
-#: ../../install_steps.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Welcome to %s"
-msgstr "Velkommen til %s"
+msgid "Next ->"
+msgstr "Næste ->"
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
msgstr ""
-"Nogle vigtige pakker blev ikke installeret rigtigt.\n"
-"Enten er dit cdrom-drev eller din cdrom fejlbehæftet.\n"
-"Tjek cdrom'en pć en færdiginstalleret maskine ved brug af \"rpm -qpl "
-"Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm:1
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duplikér monterings-sti %s"
+"Aktivering af dette vil muliggűre udskrift at rene tekstfiler pć japansk. "
+"Brug kun denne funktion hvis du virkelig űnsker at udskrive tekst pć "
+"japansk, hvis det er aktiveret kan du ikke længere udskrive bogstaver med "
+"accenter i latinske skrifttyper, og du vil ikke kunne tilpasse margenerne, "
+"tegnstűrrelse mv. Denne indstilling vedrűrer kun printere defineret pć denne "
+"maskine. Hvis du űnsker at udskrive japansk tekst pć en printer der er sat "
+"op pć en ekstern maskine, skal du aktivere denne funktion pć denne eksterne "
+"maskine."
-#: ../../install_steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
msgstr ""
-"Der opstod en fejl, men jeg ved ikke hvordan den kan hćndteres pć en\n"
-"pæn mćde.\n"
-"Fortsæt pć eget ansvar!"
+"\n"
+"Denne partition er nok\n"
+"en driver-partition. Du skal\n"
+"nok bare lade den være.\n"
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please wait"
-msgstr "Vent venligst"
+msgid "Guinea-Bissau"
+msgstr "Guinea-Bissau"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Ok"
-msgstr "O.k."
+msgid "Horizontal refresh rate"
+msgstr "Vandret opdateringsfrekvens"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Finish"
-msgstr "Afslut"
+msgid ""
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
+msgstr ""
+"Kan ikke fjerne monteringssti, da denne partition bliver brugt til "
+"loopback.\n"
+"Fjern loopback fűrst"
-#: ../../interactive.pm:1 ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Basic"
-msgstr "Basal"
+msgid ""
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
+msgstr ""
+"Netværksopsætningen lavet under installationen kan ikke startes nu. Tjek om "
+"netværket bliver tilgængeligt efter opstart af dit system, og ret "
+"konfigurationen med Mandrake Kontrolcenter, afsnittet 'Netværk og internet'/ "
+"'Forbindelse', og konfigurér derefter printeren ogsć med Mandrake "
+"Kontrolcenter, afsnittet om 'Maskinel'/'Printer'"
-#: ../../interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Advanced"
-msgstr "Avanceret"
+msgid "USB controllers"
+msgstr "USB-kontrolkort"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Remove"
-msgstr "Fjern"
+msgid "What norm is your TV using?"
+msgstr "Hvilken standard bruger dit tv?"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Modify"
-msgstr "Ændr"
+msgid "Type:"
+msgstr "Type:"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Add"
-msgstr "Tilfűj"
+msgid "Share name"
+msgstr "Dele-navn"
-#: ../../interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Choose a file"
-msgstr "Vælg en fil"
+msgid "enable"
+msgstr "aktivér"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
msgstr ""
-"Her kan du vælge tasten eller tastekombinationen som \n"
-"lader dig skifte mellem forskellige tastaturlayouter\n"
-"(dvs latinsk eller ikke-latinsk)."
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "Hűjre Windows-tast"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Left \"Windows\" key"
-msgstr "Venstre Windows-tast"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "\"Menu\" key"
-msgstr "'Menu'-tast"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt og Shift-taster samtidigt"
+"Kontakter Mandrake Linux netsted for at hente listen over tilgængelige spejle"
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl- og alt-taster samtidigt"
+msgid ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
+msgstr ""
+"Et problem opstod ved genstart af netværket: \n"
+"\n"
+"%s"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "CapsLock key"
-msgstr "CapsLock-tast"
+msgid "Remove the loopback file?"
+msgstr "Fjern loopback-filen?"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Kontrol- og skiftetaster samtidigt"
+msgid "Selected size is larger than available space"
+msgstr "Valgt stűrrelse er stűrre end tilgængelig plads"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "Begge taster samtidigt"
+msgid "NCP server name missing!"
+msgstr "NCP-servernavn mangler!"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Right Alt key"
-msgstr "Hűjre alt-tast"
+msgid "Please choose your country."
+msgstr "Vælg dit land."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslavisk (latinsk)"
+msgid "Hard Disk Backup files..."
+msgstr "Sikkerhedskopifiler for disk..."
#: ../../keyboard.pm:1
#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamesisk \"talrække\" QWERTY"
+msgid "Laotian"
+msgstr "Laotisk"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "US keyboard (international)"
-msgstr "Amerikansk (internaltionalt)"
+msgid "Samoa"
+msgstr "Samoa"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "US keyboard"
-msgstr "Amerikansk"
+msgid ""
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
+msgstr ""
+"rstat protokollen tillader brugere pć et netværk at hente systeminformation "
+"fra enhver maskine pć dette netværk."
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "UK keyboard"
-msgstr "Britisk"
+msgid "Re-generating list of configured scanners ..."
+msgstr "Regenererer liste af konfigurerede skannere ..."
-#: ../../keyboard.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Ukrainian"
-msgstr "Ukrainsk"
+msgid "Scanner"
+msgstr "Skanner"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Tyrkisk (moderne \"Q\" model)"
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr ""
+"Advarsel: afprűvning af dette grafikkort kan fć din maskine til at fryse"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Tyrkisk (traditionel \"F\" model)"
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr "Brugernavnet mć kun indeholde smć bogstaver, tal, `-' og `_'"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Tajik keyboard"
-msgstr "Tajik tastatur"
+msgid "Menudrake"
+msgstr "Menudrake"
-#: ../../keyboard.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Thai keyboard"
-msgstr "Thailandsk"
+msgid "Welcome To Crackers"
+msgstr "Velkommen til Crackere"
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "Tamil (skrivemaskine-layout)"
+msgid "Module options:"
+msgstr "Modulindstillinger:"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr "Tamil (ISCII-layout)"
+msgid "Secure your networks with the Multi Network Firewall"
+msgstr "Gűr dine netværk sikre med multinetværksbrandmur (MNF)"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Serbian (cyrillic)"
-msgstr "Serbisk (kyrillisk)"
+msgid "Go on without configuring the network"
+msgstr "Fortsæt med konfigurering af netværk"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakisk (QWERTY)"
+msgid "Abort"
+msgstr "Afbryd"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakisk (QWERTZ)"
+msgid "No password prompt on %s at port %s"
+msgstr "Ingen forespűrgsel om adgangskode pć %s ved port %s"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Slovenian"
-msgstr "Slovensk"
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "Markér om du vil bruge den ikke-tilbagespolende enhed."
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Swedish"
-msgstr "Svensk"
+msgid "Usage of remote scanners"
+msgstr "Brug skannere"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Russian (Yawerty)"
-msgstr "Russisk (Yawerty)"
+msgid "\t-CDROM.\n"
+msgstr "\t-cdrom.\n"
-#: ../../keyboard.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Russian"
-msgstr "Russisk"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
+msgstr "Din Windows partition er for fragmenteret, kűr 'defrag' fűrst"
#: ../../keyboard.pm:1
#, c-format
-msgid "Romanian (qwerty)"
-msgstr "Russisk (qwerty)"
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak (norsk)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Romanian (qwertz)"
-msgstr "Russisk (qwertz)"
+msgid "Hard Disk Backup Progress..."
+msgstr "Fremdrift for sikkerhedskopiering af disk..."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Canadian (Quebec)"
-msgstr "Canadisk (Québec)"
+msgid "Unable to fork: %s"
+msgstr "Kan ikke fork(): %s"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Portuguese"
-msgstr "Portugisisk"
+msgid "Type: "
+msgstr "Type: "
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Polsk (polsk layout)"
+msgid "<-- Edit Client"
+msgstr "<-- Redigér klient"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Polsk (polsk layout)"
+msgid "no fonts found"
+msgstr "kunne ikke finde nogen skrifttyper"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Norwegian"
-msgstr "Norsk"
+msgid "Mouse"
+msgstr "Mus"
-#: ../../keyboard.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Dutch"
-msgstr "Hollandsk"
+msgid "not enough room in /boot"
+msgstr "Ikke nok plads i /boot"
-#: ../../keyboard.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Maltese (US)"
-msgstr "Maltesisk (US)"
+msgid "Choosing an arbitratry driver"
+msgstr "Vælger en vilkćrlig driver"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Maltese (UK)"
-msgstr "Maltesisk (UK)"
+msgid "Host name"
+msgstr "Værtsnavn"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Mongolsk (kyrillisk)"
+msgid "Liechtenstein"
+msgstr "Liechtenstein"
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Myanmar (Burmese)"
-msgstr "Myanmar (Burmesisk)"
+msgid "the color of the progress bar"
+msgstr "farven pć forlűbslinjen"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Macedonian"
-msgstr "Makedonisk"
+msgid "Suppress Fonts Files"
+msgstr "Undertryk skrifttypefiler"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Malayalam"
-msgstr "Malayalam"
+msgid "Add to RAID"
+msgstr "Tilfűj til RAID"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Latvian"
-msgstr "Lettisk"
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
+"Du kan tilfűje flere valgmuligheder i Yaboot, til andre styresystemer, andre "
+"kerner, eller til nűd-opstart.\n"
+"\n"
+"For andre styresystemer bestćr indgangen blot af et navn og rodpartitionen\n"
+"\n"
+"Der er for Linux nogen fć valgmuligheder:\n"
+"\n"
+" * Label: dette er simpelthen navnet som du skal indtaste til ledeteksten "
+"fra Yaboot for at vælge denne opstartsmulighed.\n"
+"\n"
+" * Image: Dette er navnet pć den kerne der skal opstartes. Typisk vmlinux "
+"eller en variation pć vmlinux med en endelse.\n"
+"\n"
+" * Root: root enheden eller \"/\" for din Linux installation.\n"
+"\n"
+" * Append: pć Apple udstyr bruges kerne-append muligheden ofte til at hjælpe "
+"med initialisering af billedudstyr, eller til at aktivere emulering af "
+"museknapper for de manglende knap-2 og knap-3 pć musen pć en typisk Apple "
+"mus. Det fűlgende er nogle eksempler:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: denne mulighed kan bruges enten til at indlæse de fűrste moduler, "
+"fűr opstartsenheden er tilgængelig, eller til at indlæse en ramdisk ved "
+"opstart i en nűdsituation.\n"
+"\n"
+" * Initrd-size: den almindelige stűrrelse pć en ramdisk er generelt 4.096 "
+"kbyte. Hvis du har brug for at udlægge en stor ramdisk kan denne mulighed "
+"bruges til at angive en ramdisk stűrre end standarden.\n"
+"\n"
+" * Read-write: normalt bliver rod-partitionen fűrst monteret skrivebeskyttet "
+"for at muliggűre et filsystemstjek fűr systemet gćr i luften. Du kan "
+"tilsidesætte denne standard med denne valgmulighed.\n"
+"\n"
+" * NoVideo: skulle Apple-billedudstyret vise sig at være specielt "
+"problemfyldt kan du vælge denne mulighed for at starte op i 'novideo'-"
+"tilstand, med indbygget rammebufferunderstűttelse.\n"
+"\n"
+" * Default: vælger denne indgang som værende det normale Linux valg, som "
+"vælges ved at trykke RETUR ved yaboots ledetekst. Denne indgang vil ogsć "
+"blive fremhævet med en '*', hvis du trykker Tab for at se opstartsvalgene."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litauisk \"fonetisk\" QWERTY"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"Printeren \"%s\" blev tilfűjet til Star Office/OpenOffice.org/GIMP.org."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litauisk \"talrække\" QWERTY"
+msgid "No floppy drive available!"
+msgstr "Intet tilgængeligt diskettedrev!"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litauisk AZERTY (ny)"
+msgid ""
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
+msgstr ""
+"Hvilke muligheder der er for den aktuelle printer kan du enten læse pć "
+"listen vist nedenfor, eller klikke pć knappen 'Liste med printermuligheder'.%"
+"s%s%s\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litauisk AZERTY (gammel)"
+msgid "Continue anyway?"
+msgstr "Fortsæt alligevel?"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Laotian"
-msgstr "Laotisk"
+msgid ""
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
+msgstr ""
+"Hvis din printer ikke er listet, sć vælg en kompatibel (se printermanual) "
+"eller en lignende printer."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Latin American"
-msgstr "Latinamerikansk"
+msgid "Printer"
+msgstr "Printer"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Korean keyboard"
-msgstr "Koreansk tastatur"
+msgid "Saudi Arabia"
+msgstr "Saudi-Arabien"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Japanese 106 keys"
-msgstr "Japansk 106 taster"
+msgid "Internet"
+msgstr "Internet"
-#: ../../keyboard.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Inuktitut"
-msgstr "Inuktitut"
+msgid "Some devices were added:\n"
+msgstr "Nogen enheder blev tilfűjet:\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Italian"
-msgstr "Italiensk"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "Opbygning: %s cylindre, %s hoveder, %s sektorer\n"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Icelandic"
-msgstr "Islandsk"
+msgid "Printing on the printer \"%s\""
+msgstr "Udskriver pć printeren '%s'"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Iranian"
-msgstr "Iransk"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr ""
+"/etc/hosts.allow og /etc/hosts.deny allerede konfigureret - ikke ændret"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "Israelsk (Fonetisk)"
+msgid "Restore From Tape"
+msgstr "Genskab fra bćnd"
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Israeli"
-msgstr "Israelsk"
+msgid "Choose the profile to configure"
+msgstr "Vælg profilen der skal konfigureres"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Croatian"
-msgstr "Kroatisk"
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
+msgstr ""
+"\n"
+"\n"
+"Indtast et Zeroconf-værtsnavn uden noget punktum hvis du ikke űnsker at "
+"bruge det forvalgte værtsnavn."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hungarian"
-msgstr "Ungarsk"
+msgid "Backup Now from configuration file"
+msgstr "Lav sikkerhedskopi nu ud fra konfigurationsfil"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Gurmukhi"
-msgstr "Gurmukhi"
+msgid "Mount points should contain only alphanumerical characters"
+msgstr "Monteringspunkter bűr kun indeholde bogstaver og tal"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Gujarati"
-msgstr "Gujarati"
+msgid "Restarting printing system..."
+msgstr "Genstarter printsystemet ..."
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Greek"
-msgstr "Græsk"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
+msgstr ""
+"Argumenter: (navn)\n"
+"\n"
+"Tilfűj navn som en undtagelse for hćndteringen af adgangskodeforældelse af "
+"msec."
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgisk (Latin layout)"
+msgid "See hardware info"
+msgstr "Se info for maskinel"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgisk (russisk layout)"
+msgid "First sector of boot partition"
+msgstr "Fűrste sektor af opstartspartition"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "French"
-msgstr "Fransk"
+msgid "Printer manufacturer, model"
+msgstr "Printerproducent, model"
-#: ../../keyboard.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Finnish"
-msgstr "Finsk"
+msgid "PDQ - Print, Don't Queue"
+msgstr "PDQ - Print, Don't Queue"
-#: ../../keyboard.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Spanish"
-msgstr "Spansk"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
+msgstr ""
+"[OPTIONS]...\n"
+"Mandrake TerminalServer konfigureringsprogram\n"
+"--enable : aktivér MTS\n"
+"--disable : deaktivér MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : tilfűj en eksisterende systembruger til MTS (kræver "
+"brugernavn)\n"
+"--deluser : slet en eksisterende systembruger fa MTS (kræver "
+"brugernavn)\n"
+"--addclient : tilfűj en klientmaskine til MTS (kræver MAC-adresse, IP, "
+"nbi aftryksnavn)\n"
+"--delclient : tilfűj en klientmaskine til MTS (kræver MAC-adresse, IP, "
+"nbi aftryksnavn)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Estonian"
-msgstr "Estisk"
+msgid "Subnet Mask:"
+msgstr "Undernetmaske:"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (svensk)"
+msgid "LiLo and Bootsplash themes installation successfull"
+msgstr "Problemfri installation af temaer for LiLo- og opstartsskærm"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (norsk)"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"De to kritiske parametre er den lodrette frekvens, som angiver hvor mange "
+"gange (per sekund) hele skærmbilledet bliver genopfrisket, og (vigtigst af "
+"alt) den vandrette frekvens, som angiver antallet af vandrette linier der "
+"kan tegnes pć skærmen hvert sekund.\n"
+"\n"
+"Det er MEGET VIGTIGT at du ikke angiver en skærmtype med "
+"opdateringsfrekvenser, der er stűrre end din skærms formćen: du risikerer at "
+"űdelægge din skærm.\n"
+"Hvis du er i tvivl, bűr du vælge en opsætning, som du med SIKKERHED ved\n"
+"at din skærm kan klare."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
+msgid "Modify"
+msgstr "Ændr"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Danish"
-msgstr "Dansk"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
+"\n"
+"'%s'- og '%s'-kommandoerne tillader ogsć ændring af indstillingsmulighederne "
+"for et bestemt udskriftsjob. Tilfűj blot de űnskede indstillinger til "
+"kommandolinjen, fx '%s <fil>'.\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Devanagari"
-msgstr "Devanagari"
+msgid "Need hostname, username and password!"
+msgstr "Behűver værtsnavn, brugernavn og adgangskode!"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "German (no dead keys)"
-msgstr "Tysk (ingen dűde taster)"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
+"WebDAV er en protokol som lader dig montere en webserver katalog lokalt\n"
+"og behandle det som et lokalt filsystem (givet at webserveren er "
+"konfigureret\n"
+"som en WebDAV-server). Hvis du űnsker at tilfűje WebDAV-monteringspunkter,\n"
+"sć vælg \"Ny\"."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "German"
-msgstr "Tysk"
+msgid "HardDrake"
+msgstr "HardDrake"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Czech (QWERTY)"
-msgstr "Tjekkisk (QWERTY)"
+msgid "new"
+msgstr "ny"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Czech (QWERTZ)"
-msgstr "Tjekkisk (QWERTZ)"
+msgid "Would you like to try again?"
+msgstr "Vil du gerne prűve igen?"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Swiss (French layout)"
-msgstr "Schweizisk (Fransk layout)"
+msgid "Wizard"
+msgstr "Vejleder"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Swiss (German layout)"
-msgstr "Schweizisk (Tysk layout)"
+msgid "Edit selected server"
+msgstr "Redigér valgte server"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belarusian"
-msgstr "Hviderussisk"
+msgid "Please choose where you want to backup"
+msgstr "Vælg hvor du űnsker at sikkerhedskopiere"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bosnian"
-msgstr "Bosnisk"
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr "Du skal genstarte for at aktivere ændringerne i partitionstabellen"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasiliansk (ABNT-2)"
+msgid "Do not include the browser cache"
+msgstr "Medtag ikke cache for netlæser"
-#: ../../keyboard.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Bulgarian (BDS)"
-msgstr "Bulgarsk (BDS)"
+msgid "Please, choose your keyboard layout."
+msgstr "Vælg tastaturlayout."
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "Bulgarsk (fonetisk)"
+msgid "Standard"
+msgstr "Standard"
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Bengali"
-msgstr "Bengali"
+msgid "Please choose your mouse type."
+msgstr "Vælg muse-type."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Belgian"
-msgstr "Belgisk"
+msgid "Connect..."
+msgstr "Tilslut..."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidiansk (latin)"
+msgid "Failed to configure printer \"%s\"!"
+msgstr "Kunne ikke konfigurere printer '%s'!"
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Arabic"
-msgstr "Arabisk"
+msgid "not configured"
+msgstr "ikke konfigureret"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Armenian (phonetic)"
-msgstr "Armensk (fonetisk)"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Armenian (typewriter)"
-msgstr "Armensk (skrivemaskine)"
+msgid "About"
+msgstr "Om"
-#: ../../keyboard.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Armenian (old)"
-msgstr "Armensk (gammel)"
+msgid "Proxies configuration"
+msgstr "Konfiguration af mellemvært (proxy)"
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Albanian"
-msgstr "Albansk"
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Polish"
-msgstr "Polsk"
+msgid "Start: sector %s\n"
+msgstr "Start: sektor %s\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Dvorak"
-msgstr "Dvorak"
+msgid "Network interface already configured"
+msgstr "Netværksgrænsesnit allerede konfigureret"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Zimbabwe"
-msgstr "Zimbabwe"
+msgid "Couldn't access the floppy!"
+msgstr "Kunne ikke fć adgang til disketten!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Zambia"
-msgstr "Zambia"
+msgid "connecting to Bugzilla wizard ..."
+msgstr "Opkobler til vejleder for Bugzilla"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "South Africa"
-msgstr "Sydafrika"
+msgid "Mail Server"
+msgstr "Postserver"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Serbia"
-msgstr "Serbien"
+msgid "Please click on a partition"
+msgstr "Klik pć en partition"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Mayotte"
-msgstr "Mayotte"
+msgid "Linux"
+msgstr "Linux"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Yemen"
-msgstr "Yemen"
+msgid "Have a nice day!"
+msgstr "Hav det godt!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Samoa"
-msgstr "Samoa"
+msgid "across Network"
+msgstr "over netværk"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Wallis and Futuna"
-msgstr "Wallis og Futuna"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Vanuatu"
-msgstr "Vanuatu"
+msgid "Upgrade %s"
+msgstr "Opgradér %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Vietnam"
-msgstr "Vietnam"
+msgid "Select Printer Connection"
+msgstr "Vælg printer-forbindelse"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Jomfruűerne (USA)"
+msgid "Scanning for TV channels in progress ..."
+msgstr "Skanning for tv-kanaler i gang..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Virgin Islands (British)"
-msgstr "Jomfruűerne (britiske)"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
+"Fejl ved sending af fil via FTP.\n"
+" Ret venligst din FTP-konfiguration."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Venezuela"
-msgstr "Venezuela"
+msgid "IP Range Start:"
+msgstr "Start pć IP-omrćde:"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "Sankt Vincent og Grenadinerne"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"Internet superserver-dæmonen (kaldet inetd) starter forskellige internet-"
+"tjenester efter behov. Den er ansvarlig for at starte tjenester som telnet, "
+"ftp, rsh og rlogin. Hvis inetd deaktiveres, deaktiveres alle de tjenester, "
+"den er ansvarlig for."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Vatican"
-msgstr "Vatikansk"
+msgid "the height of the progress bar"
+msgstr "hűjden pć forlűbslinjen"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Uzbekistan"
-msgstr "Uzbekistan"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
+"\n"
+"- Gem via %s pć vært: %s\n"
-#: ../../lang.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Uruguay"
-msgstr "Uruguay"
+msgid "Argentina"
+msgstr "Argentina"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "Fjerne, mindre űer, USA"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
+msgstr ""
+"Argumenter: (arg)\n"
+"\n"
+" Acceptér/afvis rundkastet icmp echo."
-#: ../../lang.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Uganda"
-msgstr "Uganda"
+msgid "Domain Name Server"
+msgstr "Server for domænenavne (DNS)"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Ukraine"
-msgstr "Ukraine"
+msgid "Security Level:"
+msgstr "Sikkerhedsniveau:"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Tanzania"
-msgstr "Tanzania"
+msgid "Mount points must begin with a leading /"
+msgstr "Monteringsstier skal begynde med /"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Taiwan"
-msgstr "Taiwan"
+msgid "Postfix Mail Server"
+msgstr "Postfix postserver"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Tuvalu"
-msgstr "Tuvalu"
+msgid "Quit without saving"
+msgstr "Afslut uden at gemme"
#: ../../lang.pm:1
#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Trinidad og Tobago"
+msgid "Yemen"
+msgstr "Yemen"
-#: ../../lang.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Turkey"
-msgstr "Tyrkiet"
+msgid "This product is available on the MandrakeStore Web site."
+msgstr "Produktet findes tilgængeligt pć MandrakeStores netsted."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Tonga"
-msgstr "Tonga"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr ""
+"Indtast den maksimale stűrrelse\n"
+" tilladt for Drakbackup"
-#: ../../lang.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Tunisia"
-msgstr "Tunesien"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr "=> Der er mange ting at vælge imellem (%s).\n"
-#: ../../lang.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Turkmenistan"
-msgstr "Turkmenistan"
+msgid "Hard drive detection"
+msgstr "Harddisk bestemmelse"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "East Timor"
-msgstr "Űsttimor"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
+"Du har ikke valgt nogen gruppe af pakker.\n"
+"Vælg den minimale installation du űnsker"
-#: ../../lang.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Tokelau"
-msgstr "Tokelau"
+msgid "Please enter the WebDAV server URL"
+msgstr "Indtast LRL for WebDAV-serveren"
#: ../../lang.pm:1
#, c-format
msgid "Tajikistan"
msgstr "Tadzjikistan"
-#: ../../lang.pm:1
-#, c-format
-msgid "Thailand"
-msgstr "Thailand"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Togo"
-msgstr "Togo"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "French Southern Territories"
-msgstr "Franske sydlige territorier"
-
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Chad"
-msgstr "Tchad"
+msgid "Accept"
+msgstr "Acceptér"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "Turks- og Caicosűerne"
+msgid "Description"
+msgstr "Beskrivelse"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Swaziland"
-msgstr "Swaziland"
+msgid "Error opening %s for writing: %s"
+msgstr "Fejl ved ćbning af %s for skrivning: %s"
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Syria"
-msgstr "Syrien"
+msgid "Mouse type: %s\n"
+msgstr "Muse-type: %s\n"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "El Salvador"
-msgstr "El Salvador"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr ""
+"Dit kort kan have 3D hardware accelerations-understűttelse med XFree %s."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sao Tome and Principe"
-msgstr "Săo Tomé og Príncipe"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "Vælg cd/dvd-mediastűrrelse"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Suriname"
-msgstr "Surinam"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
+msgstr ""
+"Argumenter: (arg)\n"
+"\n"
+" Aktiverer 'su' kun fra medlemmer af wheel-gruppen, eller tillad 'su' fra "
+"enhver bruger."
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Somalia"
-msgstr "Somalia"
+msgid "Expert Area"
+msgstr "Ekspertomrćde"
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Senegal"
-msgstr "Senegal"
+msgid "Choose a monitor"
+msgstr "Vælg en skærmtype"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "San Marino"
-msgstr "San Marino"
+msgid "Empty label not allowed"
+msgstr "Tom mærkat er ikke tilladt"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Sierra Leone"
-msgstr "Sierra Leone"
+msgid "Maltese (UK)"
+msgstr "Maltesisk (UK)"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Slovakia"
-msgstr "Slovakiet"
+msgid "I can't add any more partition"
+msgstr "Kan ikke tilfűje flere partitioner"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Svalbard og Jan Mayen űerne"
+msgid "Size in MB: "
+msgstr "Stűrrelse i Mb: "
-#: ../../lang.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Slovenia"
-msgstr "Slovenien"
+msgid "Remote printer"
+msgstr "Ekstern printer"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Saint Helena"
-msgstr "Sankt Helena"
+msgid "Please choose a language to use."
+msgstr "Vælg det sprog, der skal bruges."
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Singapore"
-msgstr "Singapore"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
+"ADVARSEL: Denne enhed er tidligere blevet konfigureret til at lave "
+"forbindelse til Internettet.\n"
+"Ved kun at trykke pć OK beholder du den nuværende konfiguration.\n"
+"Ændringer i felterne nedenunder vil overskrive denne konfiguration."
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Sudan"
-msgstr "Sudan"
+msgid "I can set up your computer to automatically log on one user."
+msgstr ""
+"Jeg kan sætte din maskine op til automatisk at logge en bestemt bruger pć."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Seychelles"
-msgstr "Seychellerne"
+msgid "Floppy format"
+msgstr "Disketteformat"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Solomon Islands"
-msgstr "Salomonűerne"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Saudi Arabia"
-msgstr "Saudi-Arabien"
+msgid "Generic Printers"
+msgstr "Generelle printere"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Rwanda"
-msgstr "Rwanda"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
+msgstr ""
+"Angiv hvilken printer som udskriftsopgaverne skal gć til eller indtast et "
+"enhedsnavn/filnavn pć inddatalinjen"
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Russia"
-msgstr "Rusland"
+msgid "The scanners on this machine are available to other computers"
+msgstr "Skannerne pć denne maskine er tilgængelige for andre maskiner"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Romania"
-msgstr "Rumænien"
+msgid "First sector of the root partition"
+msgstr "Fűrste sektor af rodpartitionen"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Reunion"
-msgstr "Réunion"
+msgid "Alternative drivers"
+msgstr "Alternative drivprogrammer"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Qatar"
-msgstr "Qatar"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
+"\n"
+"Markér alle muligheder som du behűver.\n"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Palau"
-msgstr "Palau"
+msgid "Initrd"
+msgstr "Initrd"
#: ../../lang.pm:1
#, c-format
-msgid "Paraguay"
-msgstr "Paraguay"
+msgid "Cape Verde"
+msgstr "Kap Verde"
-#: ../../lang.pm:1
-#, c-format
-msgid "Portugal"
-msgstr "Portugal"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr "Om denne processor har Cyrix 6x86 Coma-fejlen eller ej"
-#: ../../lang.pm:1
-#, c-format
-msgid "Palestine"
-msgstr "Palæstina"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr ""
+"Tidlige pentiummer var fejlbehæftede og frűs vwd afkodning af bytekoden F00F"
#: ../../lang.pm:1
#, c-format
-msgid "Puerto Rico"
-msgstr "Puerto Rico"
+msgid "Guam"
+msgstr "Guam"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pitcairn"
-msgstr "Pitcairn"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
+msgstr ""
+"Angiv hvilken port din printer er forbundet til eller indtast et enhedsnavn/"
+"filnavn pć inddatalinjen"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "Sankt Pierre og Miquelon"
+msgid "/Options/Test"
+msgstr "/Indstillinger/Test"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Poland"
-msgstr "Polen"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+"Dette niveau skal bruges med omtanke. Det gűr dit system nemmere at bruge, "
+"men er meget sćrbart: det mć ikke bruges til en maskine der er i et netværk "
+"eller har forbindelse til Internettet. Der er ikke nogen kontrol af "
+"adgangskoder."
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Pakistan"
-msgstr "Pakistan"
+msgid "Mounting partition %s"
+msgstr "Monterer partition %s"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Philippines"
-msgstr "Filippinerne"
+msgid "User name"
+msgstr "Brugernavn"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Papua New Guinea"
-msgstr "Papua Ny Guinea"
+msgid "New configuration (isdn-light)"
+msgstr "Ny konfiguration (isdn-light)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "French Polynesia"
-msgstr "Fransk Polynesien"
+msgid "Userdrake"
+msgstr "Userdrake"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Peru"
-msgstr "Peru"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "Hvilken partition vil du benytte som Linux4Win?"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Panama"
-msgstr "Panama"
+msgid "Backup system"
+msgstr "Lav sikkerhedskopi af system"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Oman"
-msgstr "Oman"
+msgid "Test pages"
+msgstr "Testsider"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "New Zealand"
-msgstr "New Zealand"
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
+"Liste over data som skal genskabes:\n"
+"\n"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Niue"
-msgstr "Niue"
+msgid "Checking %s"
+msgstr "Tjekker %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Nauru"
-msgstr "Nauru"
+msgid "TCP/Socket Printer Options"
+msgstr "TCP/Sokkel-printer-parametre"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Nepal"
-msgstr "Nepal"
+msgid "Card mem (DMA)"
+msgstr "Kort mem (DMA)"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Nicaragua"
-msgstr "Nicaragua"
+msgid "France"
+msgstr "Frankrig"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Nigeria"
-msgstr "Nigeria"
+msgid "browse"
+msgstr "bladr"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Norfolk Island"
-msgstr "Norfolk Űen"
+msgid "Checking installed software..."
+msgstr "Tjekker installeret programmel..."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Niger"
-msgstr "Niger"
+msgid "Remote printer name missing!"
+msgstr "Det eksterne værtsnavn mangler!"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New Caledonia"
-msgstr "Ny Caledonien"
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "Vil du aktivere udskrift pć printerne i det lokale netværk?\n"
#: ../../lang.pm:1
#, c-format
-msgid "Namibia"
-msgstr "Namibia"
+msgid "Turkey"
+msgstr "Tyrkiet"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Mozambique"
-msgstr "Mocambique"
+msgid "Alcatel speedtouch usb"
+msgstr "Alcatel speedtouch usb"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Malaysia"
-msgstr "Malaysia"
+msgid "Number of buttons"
+msgstr "Antal knapper"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Mexico"
-msgstr "Mexico"
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Vietnamesisk \"talrække\" QWERTY"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Malawi"
-msgstr "Malawi"
+msgid "Module"
+msgstr "Modul"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Maldives"
-msgstr "Maldiverne"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
+msgstr ""
+"Desuden kan kűer lavet med dette program eller \"foomatic -configure\" ikke "
+"overflyttes."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mauritius"
-msgstr "Mauritius"
+msgid "Hardware"
+msgstr "Udstyr"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Malta"
-msgstr "Malta"
+msgid "Ctrl and Alt keys simultaneously"
+msgstr "Ctrl- og alt-taster samtidigt"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Montserrat"
-msgstr "Montserrat"
+msgid "United States"
+msgstr "U.S.A."
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mauritania"
-msgstr "Mauretanien"
+msgid "Default OS?"
+msgstr "Forvalgt styresystem?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Martinique"
-msgstr "Martinique"
+msgid "Swiss (German layout)"
+msgstr "Schweizisk (Tysk layout)"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Northern Mariana Islands"
-msgstr "Nordmarianerne"
+msgid "Configure all heads independently"
+msgstr "Konfigurér alle skærme uafhængigt"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mongolia"
-msgstr "Mongoliet"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr ""
+"Vælg den printer du űnsker at opsætte. Konfigurationen af printeren vil ske "
+"fuldstændigt automatisk. Hvis din printer ikke blev fundet korrekt eller "
+"hvis du foretrækker en tilpasset printerkonfiguration, sć slć 'Manuel "
+"konfiguration' til."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Myanmar"
-msgstr "Myanmar"
+msgid "NTP Server"
+msgstr "NTP-server"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Mali"
-msgstr "Mali"
+msgid "Load/Save on floppy"
+msgstr "Indlæs/gem pć diskette"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Macedonia"
-msgstr "Makedonien"
+msgid "This theme does not yet have a bootsplash in %s !"
+msgstr "Dette tema har endnu ikke nogen startskærm i %s!"
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Marshall Islands"
-msgstr "Marshallűerne"
+msgid "nice"
+msgstr "rart"
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Madagascar"
-msgstr "Madagaskar"
+msgid "Leaving in %d seconds"
+msgstr "Forsvinder om %d sekunder"
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Moldova"
-msgstr "Moldova"
+msgid "Please choose which serial port your modem is connected to."
+msgstr "Angiv hvilken seriel port dit modem er forbundet til."
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Monaco"
-msgstr "Monaco"
+msgid "Country"
+msgstr "Land"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Morocco"
-msgstr "Marokko"
+msgid "Property"
+msgstr "Egenskab"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Libya"
-msgstr "Libyen"
+msgid "Ghostscript"
+msgstr "Ghostscript"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Latvia"
-msgstr "Letland"
+msgid "LAN Configuration"
+msgstr "LAN konfiguration"
#: ../../lang.pm:1
#, c-format
-msgid "Luxembourg"
-msgstr "Luxemburg"
+msgid "Ghana"
+msgstr "Ghana"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lithuania"
-msgstr "Litauen"
+msgid "Path or Module required"
+msgstr "Sti eller modul krævet"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Lesotho"
-msgstr "Lesotho"
+msgid "Advanced Options"
+msgstr "Avancerede muligheder"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Liberia"
-msgstr "Liberia"
+msgid "Coma bug"
+msgstr "Coma-fejl"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Sri Lanka"
-msgstr "Sri Lanka"
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
+"Nu skal du vælge hvor Mandrake Linux skal installeres. Hvis partitionerne "
+"allerede er lavet, enten fra en tidligere installation af GNU/Linux eller "
+"med et andet partitioneringsværktűj), kan du bruge dem. Ellers skal disk-"
+"partitionerne laves fűrst.\n"
+"\n"
+"For at lave partitioner skal du fűrst vælge en harddisk. Du kan vælge disken "
+"der skal partitioneres ved at trykke pć \"hda\" for den fűrste IDE disk, "
+"\"hdb\" for den anden eller \"sda\" for den fűrste SCSI disk og sć videre.\n"
+"\n"
+"For at partitionere den valgte disk kan du bruge disse muligheder:\n"
+"\n"
+" * '%s': Dette valg sletter alle partitioner pć den valgte disk.\n"
+"\n"
+" * '%s': dette valg tillader dig automatisk at lave Ext3 og swappartitioner "
+"pć den fri plads pć din disk.\n"
+"\n"
+"* '%s': giver adgang til flere faciliteter:\n"
+"\n"
+" * '%s': Gemmer din partitionstabel pć en diskette. Nyttigt ved senere "
+"redning af partitionstabellen, om nűdvendigt. Det anbefales meget at du "
+"bruger dette trin.\n"
+"\n"
+" * '%s': lader dig genskabe en tidligere gemt partitionstabel fra "
+"diskette.\n"
+"\n"
+" * '%s': hvis din partitionstabel er beskadiget, kan du prűve at redde "
+"den med denne mulighed. Vær forsigtig og husk at det ikke altid virker.\n"
+"\n"
+" * '%s': forkaster alle ændringer og genindlæser partitionstabellen som "
+"oprindeligt lć pć disken\n"
+"\n"
+" * '%s': fravalg af denne mulighed vil tvinge brugere til at manuelt "
+"montere og afmontere media sćsom disketter og cdrommer\n"
+"\n"
+" * '%s': Hvis du űnsker at bruge vejlederen til at partitionere din disk, "
+"kan du bruge denne mulighed. Dette anbefales, hvis du ikke har den store "
+"forstćelse om partitionering\n"
+"\n"
+" * '%s': Du kan bruge denne mulighed for at annullere dine ændringer\n"
+"\n"
+" * '%s': giver mulighed for flere handlinger med partitioner (type, "
+"valgmuligheder, format) og giver mere information om diskdrevet\n"
+"\n"
+" * '%s': nćr du er færdig med partitionering af din disk, dette vil skrive "
+"ændringerne tilbage pć disken.\n"
+"\n"
+"Ved definering af en partitionsstűrrelse kan du finjustere denne ved at "
+"bruge piletasterne pć tastaturet.\n"
+"\n"
+"Bemærk: du kan nć enhver valgmulighed ved brug af tastaturet: navigér gennem "
+"partitionerne med Tab og op- og ned-pilene.\n"
+"\n"
+"Nćr en partition er valgt kan du bruge:\n"
+"\n"
+" * Ctrl-c for at lave en ny partition (Nćr en tom partition er valgt)\n"
+"\n"
+" * Ctrl-d for at slette en partition\n"
+"\n"
+" * Ctrl-m for at sætte et monteringssti\n"
+"\n"
+"For at fć information om de forskellige tilgængelige filsystemstyper kan du "
+"læse kapitlet ext2fs i 'Referencemanualen'.\n"
+"\n"
+"Hvis du er i gang med at installere pć en PPC-maskine skal du lave en lille "
+"HFS-'bootstrap'-partition pć mindst 1MB til Yaboot-systemstarteren. Hvis du "
+"vælger at lave partitionen en smule stűrre, f.eks. 50MB kan den være nyttig "
+"til at gemme en ekstra kerne og ramdisk-billede for nűdsituationer ved "
+"opstart."
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Liechtenstein"
-msgstr "Liechtenstein"
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
+" Installationsprogrammet vil normalt automatisk finde ud af at konfigurere "
+"grafikkortet installeret pć din maskine. Hvis dette ikke er tilfældet kan du "
+"fra denne liste vælge det kort du faktisk har installeret.\n"
+" I tilfælde af at forskellige drivere er tilgængelige til dit kort, med "
+"eller uden 3D-accelleration, bliver du spurgt om at vælge den server der "
+"bedst opfylder dine behov."
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Saint Lucia"
-msgstr "Sankt Lucia"
+msgid "There was an error installing packages:"
+msgstr "Der opstod en fejl ved installeringen af pakkerne:"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lebanon"
-msgstr "Libanon"
+msgid "Lexmark inkjet configuration"
+msgstr "Lexmark inkjet konfiguration"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Laos"
-msgstr "Lagos"
+msgid "Undo"
+msgstr "Fortryd"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Kazakhstan"
-msgstr "Kazakhstan"
+msgid "Save partition table"
+msgstr "Gem partitionstabel"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Cayman Islands"
-msgstr "Caymanűerne"
+msgid "Finnish"
+msgstr "Finsk"
#: ../../lang.pm:1
#, c-format
-msgid "Kuwait"
-msgstr "Kuwait"
+msgid "Macedonia"
+msgstr "Makedonien"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Korea"
-msgstr "Korea"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
+"Deling per bruger bruger gruppen 'fileshare'. \n"
+"Du kan bruge userdrake til at tilfűje en bruger til denne gruppe."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Korea (North)"
-msgstr "Korea (Nord)"
+msgid "Slovenian"
+msgstr "Slovensk"
#: ../../lang.pm:1
#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "Saint Kitts og Nevis"
+msgid "Libya"
+msgstr "Libyen"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Comoros"
-msgstr "Comorerne"
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr "Konfigurerer skript, installerer programmel, starter servere..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Kiribati"
-msgstr "Kiribati"
+msgid ""
+"\n"
+"- Burn to CD"
+msgstr ""
+"\n"
+"- Brænd pć CD"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Cambodia"
-msgstr "Cambodja"
+msgid "Table"
+msgstr "Tabel"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Kyrgyzstan"
-msgstr "Kirgisistan"
+msgid "I don't know how to format %s in type %s"
+msgstr "Ved ikke hvordan man formaterer %s som type %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Kenya"
-msgstr "Kenya"
+msgid "Model"
+msgstr "Model"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Japan"
-msgstr "Japan"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
+msgstr ""
+"Argumenter: (arg)\n"
+"\n"
+"Aktivér/deaktivér libsafe hvis libsafe findes pć systemet."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Jordan"
-msgstr "Jordan"
+msgid "Stop Server"
+msgstr "Stop server"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Jamaica"
-msgstr "Jamaica"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
+msgstr ""
+"\n"
+"Vælg et tema for\n"
+"Lilo og opstartskærmen,\n"
+"du kan vælge\n"
+"dem separat"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Iceland"
-msgstr "Island"
+msgid "Modem"
+msgstr "Modem"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Iran"
-msgstr "Iran"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
+msgstr ""
+"Argumenter: (arg, listen_tcp=None)\n"
+"\n"
+"Tillad/forbyd X-forbindelser. Fűrste argangiver hvad der gűres\n"
+"pć klientsiden: ALL (alle forbindelser er tilladt), LOCAL (kun\n"
+"lokale forbidelser) og NONE (ingen forbindelser)."
#: ../../lang.pm:1
#, c-format
-msgid "Iraq"
-msgstr "Irak"
+msgid "Tuvalu"
+msgstr "Tuvalu"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "British Indian Ocean Territory"
+msgid "Use auto detection"
+msgstr "Brug automatisk detektion"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "India"
-msgstr "Indien"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr ""
+"GPM tilfűjer muse-support til tekst-baserede Linux applikationer sćsom "
+"Midnight Commander. Den tillader muse-baseret kopiér-og-sætind operationer "
+"pć konsollen og inkluderer support for pop-op-menuer i konsollen."
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Israel"
-msgstr "Israel"
+msgid "Started on boot"
+msgstr "Startede med opstart"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Ireland"
-msgstr "Irland"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
+msgstr ""
+"Slut dig til MandrakeSofts supporthold og Linux-samfundet pć nettet for at "
+"dele din viden og hjælpe andre ved at blive en anerkendt Ekspert pć det "
+"tekniske supportnetsted:"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Indonesia"
-msgstr "Indonesien"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
+msgstr ""
+"De fűlgende tilvalg kan sættes for at tilpasse din\n"
+"systemsikkerhed. Hvis du har brug for forklaringer kan du kigge pć "
+"Hjælpetipsene.\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hungary"
-msgstr "Ungarn"
+msgid "Automatically find available printers on remote machines"
+msgstr "Find tilgængelige printere pć eksterne maskiner automatisk"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Haiti"
-msgstr "Haiti"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
+"\n"
+"- Gem pć bćnd pć enhed: %s"
#: ../../lang.pm:1
#, c-format
-msgid "Croatia"
-msgstr "Kroatien"
+msgid "East Timor"
+msgstr "Űsttimor"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Honduras"
-msgstr "Honduras"
+msgid "Del profile..."
+msgstr "Slet profil..."
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Heard- og McDonald-űerne"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr ""
+"Argumenter: (arg)\n"
+"\n"
+"Tillad/forbyd listen af brugere pć systemet pć skærmhćndteringer (kdm og "
+"gdm)."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hong Kong"
-msgstr "Hong Kong"
+msgid "Installing Foomatic..."
+msgstr "Installerer Foomatic..."
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "China"
-msgstr "Kina"
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "Log ud og tryk herefter pć Ctrl-Alt-Bak"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Guyana"
-msgstr "Guyana"
+msgid "detected"
+msgstr "Detekteret"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Guinea-Bissau"
-msgstr "Guinea-Bissau"
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr "Netværket skal være genstartet. Űnsker du at genstarte det?"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Guam"
-msgstr "Guam"
+msgid "Package: "
+msgstr "Pakke: "
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Guatemala"
-msgstr "Guatemala"
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr "Kan ikke skrive /etc/sysconfig/bootsplash."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "Syd-Georgia og Syd-Sandwich-űerne"
+msgid "SECURITY WARNING!"
+msgstr "SIKKERHEDSADVARSEL!"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Equatorial Guinea"
-msgstr "Ækvatorialguinea"
+msgid "StarOffice"
+msgstr "StarOffice"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Guadeloupe"
-msgstr "Guadeloupe"
+msgid "No, I don't want autologin"
+msgstr "Nej, jeg űnsker ikke automatisk login"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Guinea"
-msgstr "Guinea"
+msgid "Windows Migration tool"
+msgstr "Migrationsværktűj for MS Windows"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Gambia"
-msgstr "Gambia"
+msgid "All languages"
+msgstr "Alle sprog"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Greenland"
-msgstr "Grűnland"
+msgid "Removing %s"
+msgstr "Fjerner %s"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Gibraltar"
-msgstr "Gibraltar"
+msgid "Testing your connection..."
+msgstr "Tester din forbindelse..."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Ghana"
-msgstr "Ghana"
+msgid "Cache size"
+msgstr "Stűrrelse pć cachen"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "French Guiana"
-msgstr "Fransk Guinea"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
+msgstr ""
+"Kontrol af adgangskode er nu aktiveret, men brug som netværksmaskine er "
+"stadig ikke anbefalet."
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Georgia"
-msgstr "Georgien"
+msgid "Start sector: "
+msgstr "Startsektor: "
#: ../../lang.pm:1
#, c-format
-msgid "Grenada"
-msgstr "Grenada"
+msgid "Congo (Brazzaville)"
+msgstr "Congo (Brazzaville)"
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "United Kingdom"
-msgstr "Storbritannien"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr "Pakken %s skal være installeret. Űnsker du at installere den?"
#: ../../lang.pm:1
#, c-format
-msgid "Gabon"
-msgstr "Gabon"
+msgid "Seychelles"
+msgstr "Seychellerne"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Faroe Islands"
-msgstr "Færűerne"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
+msgstr ""
+"Printerdrake har sammenlignet modelnavnet fra den automatiske genkendelse af "
+"printeren med modellerne listet i dens printerdatabase for at finde den "
+"bedste match. Dette valg kan være forkert, især nćr din printer slet ikke er "
+"listet i databasen. Sć tjek om valget er korrekt og klik \"Modellen er "
+"korrekt\" hvis den er, og hvis ikke sć klik \"Vælg model manuelt\" sć du kan "
+"udvælge din printermodel manuelt pć den næste skærm.\n"
+"\n"
+"Som din printer har Printerdrake fundet:\n"
+"\n"
+"%s"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Micronesia"
-msgstr "Mikronesien"
+msgid "Bad password on %s"
+msgstr "Dćrlig adgangskode pć %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Falklandsűerne (Malvinas)"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
+msgstr ""
+"\n"
+"Der findes en ukendt printer direkte tilsluttet til dit system"
#: ../../lang.pm:1
#, c-format
-msgid "Fiji"
-msgstr "Fiji"
+msgid "Zambia"
+msgstr "Zambia"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Finland"
-msgstr "Finland"
+msgid "Security Administrator (login or email)"
+msgstr "Sikkerhedsadministrator (brugernavne eller e-post)"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Ethiopia"
-msgstr "Etiopien"
+msgid "Sorry, we support only 2.4 kernels."
+msgstr "Desværre, vi understűtter kun 2.4-kerner."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Spain"
-msgstr "Spanien"
+msgid "Romanian (qwerty)"
+msgstr "Russisk (qwerty)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Eritrea"
-msgstr "Eritrea"
+msgid "Under Devel ... please wait."
+msgstr "Under udvikling ... vent venligst:-)"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Western Sahara"
-msgstr "Vestlig Sahara"
+msgid "Czech Republic"
+msgstr "Tjekkiet"
#: ../../lang.pm:1
#, c-format
msgid "Egypt"
msgstr "Egypten"
-#: ../../lang.pm:1
-#, c-format
-msgid "Estonia"
-msgstr "Estland"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Ecuador"
-msgstr "Ecuador"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Algeria"
-msgstr "Algeriet"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Dominican Republic"
-msgstr "Dominikanske Republik"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Dominica"
-msgstr "Dominica"
-
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Denmark"
-msgstr "Danmark"
+msgid "Old configuration (isdn4net)"
+msgstr "Gammel konfiguration (isdn4net)"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Djibouti"
-msgstr "Djibouti"
+msgid "Sound card"
+msgstr "Lydkort"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Cyprus"
-msgstr "Cypern"
+msgid "Import Fonts"
+msgstr "Import af skrifttyper"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Christmas Island"
-msgstr "Juleűerne"
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+"Du har én stor MicroSoft Windows partition.\n"
+"Jeg foreslćr at du fűrst ændrer stűrrelsen pć partitionen\n"
+"(klik pć den, og klik herefter pć \"Stűrrelsesændring\")"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Cape Verde"
-msgstr "Kap Verde"
+msgid "Suppress Temporary Files"
+msgstr "Undertryk midlertidige filer"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cuba"
-msgstr "Cuba"
+msgid "Change partition type"
+msgstr "Skift partitionstype"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Colombia"
-msgstr "Columbia"
+msgid ""
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
+"Oplűsning\n"
+"\n"
+" Hér kan du vælge oplűsninger og farvedybder ud af de tilgængelige "
+"muligheder for dit udstyr. Vælg dem som bedst opfylder dine behov (du vil "
+"dog kunne ændre dette efter installationen). Et eksempel pć den valgte "
+"konfiguration vil blive vist pć skærmen."
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Cameroon"
-msgstr "Cameroun"
+msgid "Network Options"
+msgstr "Netværkstilvalg"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Chile"
-msgstr "Chile"
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
+"Visningstema\n"
+"under konsol"
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Cook Islands"
-msgstr "Cooks űer"
+msgid "Statistics"
+msgstr "Statistik"
-#: ../../lang.pm:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Cote d'Ivoire"
-msgstr "Elfenbenskysten"
+msgid "(on %s)"
+msgstr "(pć %s)"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Switzerland"
-msgstr "Schweiz"
+msgid "MM Series"
+msgstr "MM Serien"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Congo (Brazzaville)"
-msgstr "Congo (Brazzaville)"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr ""
+"Et bibliotek som beskytter mod angreb via bufferoverlűb og formatstrenge."
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Central African Republic"
-msgstr "Centralafrikanske Republik"
+msgid "average"
+msgstr "gennemsnit"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congo (Kinshasa)"
-msgstr "Congo (Kinshasa)"
+msgid "New printer name"
+msgstr "Nyt printernavn"
#: ../../lang.pm:1
#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Kokosűerne"
+msgid "Equatorial Guinea"
+msgstr "Ækvatorialguinea"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Canada"
-msgstr "Canada"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
+"Argumenter: (arg)\n"
+"\n"
+"Tillad/forbyd autologind."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belize"
-msgstr "Belize"
+msgid "Build Backup"
+msgstr "Opbyg sikkerhedskopien"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Belarus"
-msgstr "Hviderusland"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
+"For at udskrive en fil fra kommandolinjen (terminalvinduet) brug da "
+"kommandoen '%s <fil>' eller '%s <fil>'.\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Botswana"
-msgstr "Botswana"
+msgid "Currently, no alternative possibility is available"
+msgstr "Der er for nærværende ingen alternative muligheder"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Bouvet Island"
-msgstr "Bouvet-űen"
+msgid "Romanian (qwertz)"
+msgstr "Russisk (qwertz)"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Bhutan"
-msgstr "Bhutan"
+msgid "Write Config"
+msgstr "Udskriv konfiguration"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Bahamas"
-msgstr "Bahamas"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+"Routed dæmonen giver mulighed for automatisk IP rutetabel opdatering via RIP "
+"protokollen. RIP kan bruges til smć netværk, men nćr det kommer til mere "
+"komplekse netværk er der behov for en mere kompleks protokol."
#: ../../lang.pm:1
#, c-format
-msgid "Brazil"
-msgstr "Brasilien"
+msgid "Kiribati"
+msgstr "Kiribati"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Bolivia"
-msgstr "Bolivia"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
+msgstr ""
+"Argumenter: (arg)\n"
+"\n"
+"Tillad/forbyd ekstern root-logind."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Brunei Darussalam"
-msgstr "Brunei"
+msgid "Browse"
+msgstr "Bladr"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Bermuda"
-msgstr "Bermuda"
+msgid "CDROM"
+msgstr "cd-rom"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Benin"
-msgstr "Benin"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "Űnsker du at forsűge at skabe forbindelse til Internettet nu?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Burundi"
-msgstr "Burundi"
+msgid "Belgian"
+msgstr "Belgisk"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bahrain"
-msgstr "Bahrain"
+msgid "Do you have an ISA sound card?"
+msgstr "Har du et ISA-lydkort?"
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Bulgaria"
-msgstr "Bulgarien"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
+msgstr ""
+"Der blev ikke fundet nogen ethernet netværksadapter pć dit system.\n"
+"Kan ikke sætte denne forbindelsetype op."
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Burkina Faso"
-msgstr "Burkina Faso"
+msgid "Windows"
+msgstr "Windows"
-#: ../../lang.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Bangladesh"
-msgstr "Bangladesh"
+msgid "Can't make screenshots before partitioning"
+msgstr "Kan ikke lave űjebliksbilleder fűr partitionering"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Barbados"
-msgstr "Barbados"
+msgid "Host Name"
+msgstr "Værtsnavn"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Bosnien-Hercegovina"
+msgid "/File/Save _As"
+msgstr "/Fil/Gem _som"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Azerbaijan"
-msgstr "Aserbajdsjan"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr ""
+"For at fć adgang til eksterne CUPS-servere i dit lokale netværk behűver du "
+"bare at aktivere \"Find automatisk tilgængelige printere pć eksterne maskiner"
+"\"-valget: CUPS-serverene informerer din maskine automatisk om printerne. "
+"Alle printerne som for űjeblikket er kendt af din maskine er listet i "
+"\"Fjern-printere\" sektionen i hovedvinduet til Printerdrake. Hvis din CUPS-"
+"server ikke er i dit lokale netværk, mć du indtaste CUPS-servernes IP-"
+"adresser og evt. portnummeret for at fć printer-information fra serverne."
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Aruba"
-msgstr "Aruba"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr "%s findes ikke skannerdatabasen, skal den konfigureres manuelt?"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "Australia"
-msgstr "Australien"
+msgid "Delay before booting default image"
+msgstr "Ventetid fűr opstart af forvalgt styresystem"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "American Samoa"
-msgstr "Amerikansk Samoa"
+msgid "Restrict command line options"
+msgstr "Begræns kommandolinie-indstillinger"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Argentina"
-msgstr "Argentina"
+msgid "East Europe"
+msgstr "Űsteuropa"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Antarctica"
-msgstr "Antarktis"
+msgid "Use free space"
+msgstr "Brug fri plads"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Angola"
-msgstr "Angola"
+msgid "use dhcp"
+msgstr "brug dhcp"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Netherlands Antilles"
-msgstr "Hollandske Antiller"
+msgid "Mail alert"
+msgstr "Post-pćmindelse"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Armenia"
-msgstr "Armenien"
+msgid "Internet configuration"
+msgstr "Internet-konfiguration"
#: ../../lang.pm:1
#, c-format
-msgid "Albania"
-msgstr "Albanien"
+msgid "Uzbekistan"
+msgstr "Uzbekistan"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Anguilla"
-msgstr "Anguilla"
+msgid "Detected %s"
+msgstr "Fandt %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Antigua og Barbuda"
+msgid "/Autodetect _printers"
+msgstr "/Auto-detektér printere"
-#: ../../lang.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "United Arab Emirates"
-msgstr "Forenede Arabiske Emirater"
+msgid "Finish"
+msgstr "Afslut"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Andorra"
-msgstr "Andorra"
+msgid "Show automatically selected packages"
+msgstr "Vis automatisk valgte pakker"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Afghanistan"
-msgstr "Afghanistan"
+msgid "CPU flags reported by the kernel"
+msgstr "CPU flag rapporteret af kernen"
#: ../../lang.pm:1
#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
-
-#: ../../loopback.pm:1
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Cirkulære monteringer %s\n"
-
-#: ../../lvm.pm:1
-#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Fjern de logiske delarkiver fűrst\n"
-
-#: ../../modules.pm:1
-#, c-format
-msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"PCMCIA-understűttelse eksisterer ikke længere for 2.2-kerner. Brug en 2.4-"
-"kerne."
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "FLYT PĆ HJULET!"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "To activate the mouse,"
-msgstr "For at aktivere musen,"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "Please test the mouse"
-msgstr "Test musen"
+msgid "Togo"
+msgstr "Togo"
-#: ../../mouse.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "No mouse"
-msgstr "Ingen mus"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr "Noget gik galt! - er mkisofs installeret?"
-#: ../../mouse.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "none"
-msgstr "ingenting"
+msgid "16 MB"
+msgstr "16 Mb"
-#: ../../mouse.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "3 buttons"
-msgstr "3 knapper"
+msgid "Please try again"
+msgstr "Prűv igen"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "2 buttons"
-msgstr "2 knapper"
+msgid "The model is correct"
+msgstr "Modellen er korrekt"
-#: ../../mouse.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "1 button"
-msgstr "1 knap"
+msgid "FAT resizing failed: %s"
+msgstr "FAT stűrrelsesændring mislykkedes: %s"
-#: ../../mouse.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "busmouse"
-msgstr "Busmus"
+msgid "Individual package selection"
+msgstr "Individuelt pakkevalg"
-#: ../../mouse.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking-mus"
+msgid "This partition is not resizeable"
+msgstr "Stűrrelsen pć denne partition kan ikke ændres"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech mus (seriel, gammel C7 type)"
+msgid "Location"
+msgstr "Placering"
-#: ../../mouse.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid "USA (cable-hrc)"
+msgstr "USA (kabel-hrc)"
-#: ../../mouse.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "MM Series"
-msgstr "MM Serien"
+msgid "Journalised FS"
+msgstr "Journaliserende FS"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid "Guatemala"
+msgstr "Guatemala"
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "This machine"
+msgstr "Denne maskine"
-#: ../../mouse.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Serien (seriel)"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "DOS-drevbogstav: %s (bare et gæt)\n"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select the files or directories and click on 'OK'"
+msgstr "Vælg filerne eller katalogerne og klik pć 'Tilfűj'"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid "Bahrain"
+msgstr "Bahrain"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "omit scsi modules"
+msgstr "undgć scsi-moduler"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Standard 3-knaps mus"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr "Processorens familie (fx 6 for i686-klasse)"
-#: ../../mouse.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Standard 2-knaps mus"
+msgid ""
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
+msgstr ""
+"Da du er i gang med en netværksinstallation er dit netværk allerede "
+"konfigureret.\n"
+"Klik OK for at beholde din konfiguration, eller annullér for at "
+"omkonfigurere din Internet- og netværksforbindelse.\n"
-#: ../../mouse.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "serial"
-msgstr "seriel"
+msgid "Keyboard layout: %s\n"
+msgstr "Tastatur-type: %s\n"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
+"Her kan du vælge om printerne sluttet til denne maskine skal være "
+"tilgængelige fra eksterne maskiner, og fra hvilke eksterne maskiner."
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Wheel"
-msgstr "Hjul"
+msgid "Maltese (US)"
+msgstr "Maltesisk (US)"
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Generic"
-msgstr "Standard"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"Monterer og afmonterer alle netværks filsystemer (NFS), SMB (LanManager/"
+"Windows) og NCP (NetWare) monterings-stier"
-#: ../../mouse.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid "Tvcard"
+msgstr "TV-kort"
-#: ../../mouse.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+msgid "Toggle between normal/expert mode"
+msgstr "Skift mellem normal og ekspert-tilstand"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Standard PS2 mus med hjul"
+msgid "Size"
+msgstr "Stűrrelse"
-#: ../../mouse.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+msgid "GRUB"
+msgstr "GRUB"
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Standard"
-msgstr "Standard"
+msgid "Greenland"
+msgstr "Grűnland"
#: ../../mouse.pm:1
#, c-format
-msgid "Sun - Mouse"
-msgstr "Sun-mus"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Skift mellem flad og gruppesorteret"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Collapse Tree"
-msgstr "Sammenfold træ"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Expand Tree"
-msgstr "Udvid træ"
-
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Info"
-msgstr "Info"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Is this correct?"
-msgstr "Er dette korrekt?"
-
-#: ../../my_gtk.pm:1
-#, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Fejl ved skrivning til fil %s"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Bad backup file"
-msgstr "Fejl i sikkerhedskopien"
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
-#: ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Genskabning fra fil %s mislykkedes: %s"
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr "Ikke korrekt bćndetiket. Bćndet har etiket %s."
-#: ../../partition_table.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"Du har plads tilovers i din partitionstabel, men jeg kan ikke udnytte den.\n"
-"Den eneste lűsning er at flytte dine primære partitioner, sćledes at\n"
-"\"hullet\" bliver placeret ved siden af de udvidede partitioner."
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Udvidet partition ikke understűttet pć denne platform"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "mount failed: "
-msgstr "montering mislykkedes: "
-
-#: ../../pkgs.pm:1
-#, c-format
-msgid "maybe"
-msgstr "mćske"
+"Indstilling af deling af internetforbindelse er allerede gjort.\n"
+"Deling er aktiveret.\n"
+"\n"
+"Hvad űnsker du at gűre?"
-#: ../../pkgs.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "nice"
-msgstr "rart"
+msgid "Delete All NBIs"
+msgstr "Slet alle NBI'er"
-#: ../../pkgs.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "very nice"
-msgstr "meget rart"
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
+msgstr ""
+"Denne dialog giver dig mulighed for at finindstille din opstartsindlæser:\n"
+"\n"
+" * '%s': der er tre muligheder for din opstartsindlæser:\n"
+"\n"
+" * '%s': hvis du foretrækker GRUB (tekstmenu).\n"
+"\n"
+" * '%s': hvis du foretrækker LILO med tekstgrænseflade.\n"
+"\n"
+" * '%s': hvis du foretrækker LILO med grafikgrænseflade.\n"
+"\n"
+" * '%s': I de fleste tilfælde vil det ikke være nűdvendigt at ændre standard "
+"('%s'), men hvis du foretrækker det, kan opstartsindlæseren installeres pć "
+"det andet diskdrev ('%s'), eller endda pć en diskette ('%s').\n"
+"\n"
+" * '%s': Efter opstart eller genstart af maskinen er dette den tid der gives "
+"til brugeren pć konsollen til at vælge en anden opstartsindgang end den "
+"forvalgte.\n"
+"\n"
+"Vær opmærksom pć at hvis du vælger ikke at installere en opstartsindlæser "
+"(ved at vælge '%s'), skal du være sikker pć at du har en anden mćde at "
+"starte dit Mandrake Linux-system op pć! Vær sikker pć hvad du gűr hvis du "
+"ændrer nogen af tilvalgene her!\n"
+"\n"
+"Et klik pć '%s'-knappen i denne dialog vil tilbyde avancerede muligheder "
+"beregnet til ekspertbrugeren."
-#: ../../pkgs.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "important"
-msgstr "vigtigt"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
+msgstr ""
+"hvis sat, sć send postrapporter til denne postadresse, ellers send dem til "
+"root."
-#: ../../pkgs.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "must have"
-msgstr "skal have"
+msgid "Which configuration of XFree do you want to have?"
+msgstr "Hvilken konfiguration af XFree űnsker du?"
-#: ../../raid.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ikke nok partitioner til at benytte RAID level %d\n"
+msgid "More"
+msgstr "Mere"
-#: ../../raid.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "mkraid failed"
-msgstr "mkraid fejlede"
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+"Med dette sikkerhedsniveau kan brug som server komme pć tale.\n"
+"Sikkerheden er nu hűj nok til at systemet kan bruges som server som tillader "
+"forbindelser fra mange klienter. Bemærk: hvis din maskine kun er en klient "
+"pć internettet bűr du hellere vælge et lavere niveau."
-#: ../../raid.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid fejlede (mćske mangler raidtools?)"
+msgid "Account Password"
+msgstr "Adgangskode for konto"
-#: ../../raid.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Kan ikke tilfűje en partition til _formatéret_ RAID md%d"
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
+msgstr ""
+"Du besluttede at installere opstartsindlæseren pć en partition.\n"
+"Dette indikerer at du allerede har en opstartsindlæser pć disken som du "
+"starter op fra (fx System Commander).\n"
+"\n"
+"Hvilket drev starter du op fra?"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Stop"
-msgstr "Stop"
+msgid "Tajik keyboard"
+msgstr "Tajik tastatur"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Start"
-msgstr "Start"
+msgid ""
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
+msgstr ""
+"Du kan kopiere printerkonfigurationen du har sat op for kűserveren %s til %"
+"s, din nuværende kűserver. Al konfigurationsdata (printernavn, beskrivelse, "
+"opkoblingstype og standardindstillinger) bliver overtaget, men ikke "
+"opgaver.\n"
+"Ikke alle kűer kan overfűres pć grund af:\n"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "On boot"
-msgstr "Ved opstart"
+msgid "Font List"
+msgstr "Liste over skrifttyper"
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"No additional information\n"
-"about this service, sorry."
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
msgstr ""
-"Beklager, der er ingen ekstra\n"
-"information om denne tjeneste."
+"Du behűver mćske at ændre din Ćben Firmware opstartsenhed for at slć "
+"systemstarteren til. Hvis du ikke ser systemstarter-beskeden ved genstart, "
+"sć hold Command-Option-O-F nede og indtast:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Skriv sć: shut-down\n"
+"Ved næste opstart burde du se systemstarteren."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Services and deamons"
-msgstr "Tjenester og dæmoner"
+msgid ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
+msgstr ""
+"Det virker som om du har en OldWorld eller ukendt maskine, yaboot "
+"opstartsindlæseren vil ikke virke for dig. Installationen vil fortsætte, men "
+"du skal bruge BootX eller en anden mćde til at starte din maskine."
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "stopped"
-msgstr "stoppet"
+msgid "Select file"
+msgstr "Vælg fil"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "running"
-msgstr "kűrer"
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
+msgstr ""
+"Vælg netværket eller værten pć hvilken de lokale printere skal gűres "
+"tilgængelige: "
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Vælg hvilke tjenester der skal startes automatisk ved opstart"
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr ""
+"Disse kommandoer kan du ogsć bruge fra 'udskrivningskommando'-feltet i "
+"udskriftsdialogerne i mange programmer, men lad være med at angive filnavnet "
+"her, fordi filen der skal udskrives leveres af programmet.\n"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Database Server"
-msgstr "Databaseserver"
+msgid "Japan"
+msgstr "Japan"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote Administration"
-msgstr "Ekstern administration"
+msgid "Print option list"
+msgstr "Liste med printermuligheder"
-#: ../../services.pm:1
+#: ../../standalone/localedrake:1
#, c-format
-msgid "File sharing"
-msgstr "Fildeling"
+msgid "The change is done, but to be effective you must logout"
+msgstr "Ændringen er fortaget, men for at være effektiv skal du logge ud"
-#: ../../services.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Internet"
-msgstr "Internet"
+msgid "Search servers"
+msgstr "Sűg efter servere"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printing"
-msgstr "Printning"
+msgid "NCP queue name missing!"
+msgstr "NCP-kűnavn mangler!"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgid ""
+"Warning, another internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"Starter X-font serveren (dette er obligatorisk for at XFree skal kűre)."
+"Advarsel, en anden internetforbindelse er blevet fundet, der mćske bruger "
+"dit netværk"
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Indlæs driverne for dine usb-enheder."
+msgid "Cd-Rom labeled \"%s\""
+msgstr "Cdrom med etikette '%s'"
#: ../../services.pm:1
#, c-format
msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
msgstr ""
-"Syslog er en facilitet som mange dæmoner bruger til log beskeder\n"
-"Det er en god idé altid at kűre syslog"
-
-#: ../../services.pm:1
-#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Start lydsystemet pć din maskine"
+"Gemmer og henter systemets entropipűl for en hűjre kvalitet\n"
+"ved generering af tilfældige tal."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
msgstr ""
-"rwho protokollen tillader eksterne brugere at hente en liste over alle "
-"brugere der er logget ind pć en maskine, der kűrer rwho dæmonen (minder om "
-"finger)."
+"Kontrol af filsystem %s mislykkedes. Űnsker du at reparere fejlene (bemærk, "
+"du kan miste data)"
-#: ../../services.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers protokollen tillader brugere pć et netværk a identificere\n"
-"hvem der er logget pć andre maskiner"
+msgid "Turn your computer into a reliable server"
+msgstr "Gűr din maskine til en pćlidelig server"
-#: ../../services.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokollen tillader brugere pć et netværk at hente systeminformation "
-"fra enhver maskine pć dette netværk."
+msgid " (driver %s)"
+msgstr " (drivprogram %s)"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
+"Loopback file(s):\n"
+" %s\n"
msgstr ""
-"Routed dæmonen giver mulighed for automatisk IP rutetabel opdatering via RIP "
-"protokollen. RIP kan bruges til smć netværk, men nćr det kommer til mere "
-"komplekse netværk er der behov for en mere kompleks protokol."
+"Loopback-fil(er):\n"
+" %s\n"
-#: ../../services.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
-msgstr ""
-"Tilordn rć enheder til blokenheder (som harddisk-\n"
-"partitioner) til brug af applikationer som Oracle eller DVD-afspillere"
+msgid "I don't know"
+msgstr "Det ved jeg ikke"
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Gemmer og henter systemets entropipűl for en hűjre kvalitet\n"
-"ved generering af tilfældige tal."
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr ", TCP/IP vært \"%s\", port %s"
-#: ../../services.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
msgstr ""
-"Postfix er en transport-agent for post, som bruges af programmer der flytter "
-"post fra en maskine til en anden."
+"Du er ved at konfigurere en automatisk installationsdiskette. Denne mulighed "
+"er lidt farlig, og mć bruges med forsigtighed.\n"
+"\n"
+"Med denne mulighed vil du igen kunne kűre installationen du gennemfűrte pć "
+"denne maskine, med muligheden for at selv kunne ændre pć nogen af "
+"indstillingerne.\n"
+"\n"
+"For maksimal sikkerhed vil partitioneringen og formateringen aldrig blive "
+"gennemfűrt automatisk, uanset hvad du valgte under installationen.\n"
+"\n"
+"Űnsker du at fortsætte?"
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
msgstr ""
-"Portmapper hćndterer RPC tilslutninger, som bliver brugt af protokoller som "
-"NFS og NIS. Portmap serveren skal kűre pć maskiner som bruger protokoller "
-"der udnytter RPC mekanismen"
+"\n"
+"\n"
+"Dit kort bruger i űjeblikket %s\"%s\"-driveren (normal driver for dit kort "
+"er \"%s\")"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA understűttelse er normalt til at understűtte ting som ethernet og "
-"modemer pć bærbare. Den vil ikke blive startet medmindre den er "
-"konfigureret, sć det er sikkert at have den installeret pć maskiner der ikke "
-"har behov for den."
+msgid "Post Uninstall"
+msgstr "Efterbehandling for afinstallering"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Stűtter OKI 4w og kompatible winprintere."
+msgid " ("
+msgstr " ("
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Aktiverer automatisk numlock-tast i konsol og XFree ved\n"
-"opstart."
+msgid "Cpuid level"
+msgstr "CPUid-niveau"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS er en populær protokol til fildeling over TCP/IP\n"
-"netværk. Denne service giver NFS fillćsnings funktionalitet"
+msgid "Mongolian (cyrillic)"
+msgstr "Mongolsk (kyrillisk)"
-#: ../../services.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS er en populær protokol til fildeling over TCP/IP netværk.\n"
-"Denne tjeneste giver NFS-serverfunktionalitet, som konfigureres gennem /etc/"
-"exports filen"
+msgid "Add a module"
+msgstr "Tilfűj et modul"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktiverer/deaktiverer alle netværks-kort som er konfigureret\n"
-"til at starte ved opstart"
+msgid "Profile to delete:"
+msgstr "Profil der skal slettes:"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Monterer og afmonterer alle netværks filsystemer (NFS), SMB (LanManager/"
-"Windows) og NCP (NetWare) monterings-stier"
+msgid "Local measure"
+msgstr "Lokal mćling"
-#: ../../services.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) er en domæne-navneserver (DNS) der bruges til opslag af IP-"
-"adresser for værtsnavne."
+msgid "busmouse"
+msgstr "Busmus"
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtuel Server, brugt til at bygge en server med hűj ydelse og\n"
-"tilgængelighed."
+msgid "Account Login (user name)"
+msgstr "Konto-login (brugernavn)"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd er printer-dæmonen som er nűdvendig for at lpr virker.\n"
-"Den er basalt en server der hćndterer udskrifts-opgaver."
+msgid "Fdiv bug"
+msgstr "Fdiv-fejl"
-#: ../../services.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
msgstr ""
-"Linuxconf vil nogen gange arrangere udfűrelse af forskellige opgaver ved "
-"opstart for at vedligeholde systemkonfigurationen."
+"konfigurering med drakfirewall\n"
+"\n"
+"Forsikr dig om at du har konfigureret din internetforbindelse med "
+"drakconnect fűr du gćr videre."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "automatisk opdagelse og konfigurering af maskinel ved opstart."
+msgid "Benin"
+msgstr "Benin"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatisk regenerering af kernehoved i /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
+msgid "Uruguay"
+msgstr "Uruguay"
-#: ../../services.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Denne pakke indlæser den valgte tastatur-tabel, som valgt i /etc/sysconfig/"
-"keyboard. Dette kan vælges i kbdconfig programmet. Dette bűr være slćet til "
-"pć de fleste maskiner."
+msgid "Path selection"
+msgstr "Valg af sti"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Start pakkefiltrering for Linux kerne 2.2 serien for at opsætte en brandmur "
-"til at beskytte din maskine mod netværksangreb."
+msgid "Name/IP address of host:"
+msgstr "Navn eller IP-adresse pć vært:"
-#: ../../services.pm:1
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Monitor: %s\n"
+msgstr "Skærm: %s\n"
+
+#: ../../partition_table/raw.pm:1
#, c-format
msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
msgstr ""
-"Internet superserver-dæmonen (kaldet inetd) starter forskellige internet-"
-"tjenester efter behov. Den er ansvarlig for at starte tjenester som telnet, "
-"ftp, rsh og rlogin. Hvis inetd deaktiveres, deaktiveres alle de tjenester, "
-"den er ansvarlig for."
+"Noget slemt sker pć dit drev. \n"
+"En test for at tjekke integriteten af data er mislykkedes. \n"
+"Dette betyder at alt pć disken vil ende som tilfældige beskadigede data."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr "Apache er en webserver. Den bruges til at betjene HTML-filer og CGI."
+msgid "Printer host name or IP missing!"
+msgstr "Værtsnavn eller IP-adresse pć printer mangler!"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake kűrer en sűgning efter maskinel, og kan konfigurere nyt/ændret "
-"maskinel."
+msgid "Please check all users that you want to include in your backup."
+msgstr "Markér alle brugere som du vil have med i din sikkerhedskopi."
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
msgstr ""
-"GPM tilfűjer muse-support til tekst-baserede Linux applikationer sćsom "
-"Midnight Commander. Den tillader muse-baseret kopiér-og-sætind operationer "
-"pć konsollen og inkluderer support for pop-op-menuer i konsollen."
+"Denne %s skal være konfigureret af printerdrake.\n"
+"Du kan starte printerdrake fra Mandrake Kontrolcenter i Udstyr-afsnittet."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron er et standard UNIX program der kűrer bruger-specifikke programmer pć "
-"planlagte tidspunkter. Vixie cron tilfűjer en del forbedringer til den "
-"basale UNIX cron, inklusive bedre sikkerhed og stærkere "
-"konfigurationsmuligheder."
+msgid "Bangladesh"
+msgstr "Bangladesh"
-#: ../../services.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Kűrer planlagte kommandoer med 'at' kommandoen pć tiden specificeret da 'at' "
-"blev kűrt, og kűrer batch kommandoer nćr den gennemsnitlige systembelastning "
-"er lav nok"
+msgid "Japan (cable)"
+msgstr "Japan (kabel)"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
-"apmd bruges til at overvćge batteristatus og skrive log til syslog.\n"
-"Den kan ogsć bruges til at lukke maskinen nćr batteriet er pć lav."
-
-#: ../../services.pm:1
-#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron en periodisk kommando planlægger"
+"\n"
+"Velkommen til guiden for printerinstallation\n"
+"\n"
+"Denne guide lader dig installere printere sluttet til denne maskine, direkte "
+"til netværket eller til en ekstern Windows-maskine.\n"
+"\n"
+"Hvis du har printere sluttet til denne maskine, sć tilslut og tænd dem nu sć "
+"de kan identificeres automatisk. Netværksprinterne og Windows-maskinerne "
+"skal ogsć være tilsluttede og tændte.\n"
+"\n"
+"Bemærk at det tager længere tid at identificere netværksprintere end at "
+"identificere lokalt tilsluttede printere. Sć deaktivér autoidentifikation af "
+"netværksprintere og/eller printere sluttede til Windows-maskiner hvis du "
+"ikke har brug for dette.\n"
+"\n"
+"Klik pć \"Næste\" hvis du er klar og pć \"Annullér\" hvis du ikke vil "
+"installere printere nu."
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Start ALSA (Advanced Linux Sound Architecture) lydsystemet"
+msgid "Initial tests"
+msgstr "Begyndelsestester"
-#: ../../standalone.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Installing packages..."
-msgstr "Installerer pakker..."
+msgid "Continue"
+msgstr "Fortsæt"
-#: ../../standalone.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-msgstr ""
-"\n"
-"Brug: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+msgid "Custom Restore"
+msgstr "Tilpasset genskabelse"
-#: ../../standalone.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
msgstr ""
-" [everything]\n"
-" XFdrake [--noauto] skærm\n"
-" XFdrake oplűsning"
+"'%s': Hvis et lydkort er blevet fundet pć dit system, vil det blive vist "
+"her. Hvis du bemærker at det viste lydkort ikke er det som faktisk er til "
+"stede pć systemet, kan du klikke pć knappen og vælge en anden driver."
-#: ../../standalone.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
-"[--manual] [--device=enhed] [--update-sane=sane_kilde_kat] [--update-"
-"usbtable] [--dynamic=enhed]"
+msgid "Script-based"
+msgstr "Skript-baseret"
-#: ../../standalone.pm:1
+#: ../../install_any.pm:1 ../../partition_table.pm:1
#, c-format
-msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
-msgstr ""
-"[OPTION]...\n"
-" --no-confirmation spűrg ikke det fűrste bekræftelsesspűrgsmćl i "
-"MandrakeUpdate-tilstand\n"
-" --no-verify-rpm efterprűv ikke pakke-signaturer\n"
-" --changelog-first vís changelog fűr filliste i beskrivelsesvinduet\n"
-" --merge-all-rpmnew foreslć at flette alle .rpmnew/.rpmsave filer fundet"
+msgid "Error reading file %s"
+msgstr "Fejl ved læsning af filen %s"
-#: ../../standalone.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "PLL setting:"
+msgstr "PLL-opsætning:"
-#: ../../standalone.pm:1
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
-msgstr ""
-"[VALGMULIGHEDER]\n"
-"Program til netværks- & Internet forbindelse og overvćgning\n"
-"\n"
-"--defaultintf grænseflade : vís denne grænseflade som standard\n"
-"--connect : kobl op til internettet hvis ikke allerede opkoblet\n"
-"--disconnect : kobl fra internettet hvis allerede opkoblet\n"
-"--force : brugt med (dis)connect : gennemtving (dis)connect.\n"
-"--status : returnerer 1 hvis opkoblet, ellers 0; afslut derefter.\n"
-"--quiet : vær ikke interaktiv. Bruges med (dis)connect."
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "Du skal have en FAT-partition monteret under /boot/efi"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr "[--file=minfil] [--word=mitord] [--explain=regudtryk] [--alert]"
+msgid " on "
+msgstr " pć "
-#: ../../standalone.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "[keyboard]"
-msgstr "[tastatur]"
+msgid "The URL must begin with http:// or https://"
+msgstr "URL'en skal begynde med http:// eller https://"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
msgstr ""
-"[OPTIONS]...\n"
-"Mandrake TerminalServer konfigureringsprogram\n"
-"--enable : aktivér MTS\n"
-"--disable : deaktivér MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : tilfűj en eksisterende systembruger til MTS (kræver "
-"brugernavn)\n"
-"--deluser : slet en eksisterende systembruger fa MTS (kræver "
-"brugernavn)\n"
-"--addclient : tilfűj en klientmaskine til MTS (kræver MAC-adresse, IP, "
-"nbi aftryksnavn)\n"
-"--delclient : tilfűj en klientmaskine til MTS (kræver MAC-adresse, IP, "
-"nbi aftryksnavn)"
+"Du kan direkte opgive URI til printeren. URIen skal være i henhold til enten "
+"CUPS- eller Foomatic-standarden. Bemærk at ikke alle typer URIer "
+"understűttes af alle kű-behandlere."
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
-msgstr ""
-"Skrifttype-import og "
-"overvćgningsapplikation \n"
-"--windows_import : importér fra alle tilgængelige windowspartitioner.\n"
-"--xls_fonts : vis alle skrifttyper som allerede eksisterer fra xls\n"
-"--strong : stærk verifikation af skrifttyper.\n"
-"--install : installér alle skrifttyper og kataloger.\n"
-"--uninstall : afinstallér alle skrifttyper og kataloger.\n"
-"--replace : erstat skrifttyper som eksisterer fra fűr\n"
-"--application : 0 ingen applikation.\n"
-" : 1 alle tilgængelige understűttede applikationer.\n"
-" : applikationsnavn, som \"so\" for staroffice \n"
-" : og gs for ghostscript."
+msgid "Other OS (SunOS...)"
+msgstr "Andet styresystem (SunOS...)"
-#: ../../standalone.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
-msgstr ""
-"[VALGMULIGHEDER] [PROGRAM-NAVN]\n"
-"\n"
-"VALGMULIGHEDER:\n"
-" --help - udskriv denne hjælpebesked.\n"
-" --report - program bær være én af Mandrakes værktűjer\n"
-" --incident - program bær være én af Mandrakes værktűjer"
+msgid "Install/Upgrade"
+msgstr "Installér/Opgradér"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "%d packages"
+msgstr "%d pakker"
#: ../../standalone.pm:1
#, c-format
@@ -7314,4865 +6805,5293 @@ msgstr ""
"--help : vís denne besked.\n"
"--version : vís versionsnummer.\n"
-#: ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Domain Authentication Required"
+msgstr "Domænegodkendelse pćkrævet"
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
msgstr ""
-"Dette program er gratis programmel; du kan redistribuere det og/eller ændre\n"
-"det i henhold til betingelserne i GNU General Public License, som publiceret "
-"af\n"
-"Free Software Foundation; enten version 2, eller enhver senere udgave\n"
-"af licensen.\n"
"\n"
-"Dette program er udgivet i hćb om at det vil være anvendeligt, men\n"
-"UDEN NOGEN FORM FOR GARANTI; heller ikke garanti om\n"
-"SALGBARHED eller EGNETHED TIL ET BESTEMT FORMĆL. Se GNU\n"
-"General Public License for flere detaljer.\n"
"\n"
-"Du skulle have modtaget en kopi af GNU General Public License\n"
-"sammen med dette program; hvis ikke, skriv til Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,\n"
-"USA.\n"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Exit install"
-msgstr "Afslut installation"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Install updates"
-msgstr "Installér opdateringer"
+" Tak til:\n"
+"\t- LTSP-projektet http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
-#: ../../steps.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Configure services"
-msgstr "Konfigurér tjenester"
+msgid "Costa Rica"
+msgstr "Costa Rica"
-#: ../../steps.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Configure X"
-msgstr "Konfigurér X"
+msgid "Use libsafe for servers"
+msgstr "Brug libsafe for servere"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Install bootloader"
-msgstr "Installér systemopstarter"
+msgid "Icelandic"
+msgstr "Islandsk"
-#: ../../steps.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Configure networking"
-msgstr "Konfigurér netværk"
+msgid ""
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
+"\n"
+"Brug: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
-#: ../../steps.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Add a user"
-msgstr "Tilfűj bruger"
+msgid "Please relog into %s to activate the changes"
+msgstr "Log ind i %s igen for at aktivere ændringerne"
-#: ../../steps.pm:1
+#: ../../my_gtk.pm:1
#, c-format
-msgid "Root password"
-msgstr "Adgangskode for root"
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-#: ../../steps.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Install system"
-msgstr "Installér system"
+msgid "Lilo/grub mode"
+msgstr "Lilo/grub modus"
-#: ../../steps.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Choose packages to install"
-msgstr "Vælg pakker til installation"
+msgid "Output"
+msgstr "Uddata"
-#: ../../steps.pm:1
+#: ../../loopback.pm:1
#, c-format
-msgid "Format partitions"
-msgstr "Formatér partitioner"
+msgid "Circular mounts %s\n"
+msgstr "Cirkulære monteringer %s\n"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Partitioning"
-msgstr "Opdeling af disk"
+msgid "Martinique"
+msgstr "Martinique"
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose your keyboard"
-msgstr "Vælg tastatur"
+msgid "HardDrive / NFS"
+msgstr "Diskdrev / NFS"
-#: ../../steps.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Select installation class"
-msgstr "Vælg installations-metode"
+msgid "a number"
+msgstr "et tal"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Hard drive detection"
-msgstr "Harddisk bestemmelse"
+msgid "Swedish"
+msgstr "Svensk"
-#: ../../steps.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Configure mouse"
-msgstr "Konfigurér mus"
+msgid "Which %s driver should I try?"
+msgstr "Hvilken %s driver skal jeg prűve?"
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "License"
-msgstr "Licens"
+msgid ""
+"You will receive an alert if one of the selected services is no longer "
+"running"
+msgstr ""
+"Du vil modtage en advarsel hvis en af de valgte tjenester ikke længere kűrer"
-#: ../../steps.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Language"
-msgstr "Vælg sprog"
+msgid "Filesystem types:"
+msgstr "Filsystems-typer:"
-#: ../../ugtk2.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "utopia 25"
-msgstr "utopia 25"
+msgid ", multi-function device on HP JetDirect"
+msgstr ", multi-funktions-enhed pć HP JetDirect"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "OK"
-msgstr "O.k."
+msgid "Northern Mariana Islands"
+msgstr "Nordmarianerne"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "logdrake"
-msgstr "logdrake"
+msgid "none"
+msgstr "ingenting"
-#: ../../ugtk.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgid "user :"
+msgstr "bruger:"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installations-skærmdriver)"
+msgid "Please enter your password"
+msgstr "Indtast din adgangskode"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Dit kort kan have 3D acceleration understűttelse, men kun med XFree %s,\n"
-"VIGTIGT: Dette er eksperimentelt og kan fć din maskine til at lćse eller gć "
-"ned."
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s med EKSPERMENTAL 3d hardware acceleration"
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
msgstr ""
-"Dit kort kan have 3D hardware accelerations-understűttelse med XFree %s."
+"Navnet pć profilen der skal oprettes (den nye profil oprettes som en \n"
+"kopi af den nuværende) :"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s med 3D hardware acceleration"
+msgid "Floppy"
+msgstr "Diskette"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Dit kort kan have 3D acceleration understűttelse, men kun med XFree %s.\n"
-"VIGTIGT: Dette er eksperimentelt og kan fć din maskine til at lćse eller gć "
-"ned.\n"
-"Dit kort er understűttet af XFree %s som kan have bedre understűttelse i 2D."
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "Markér om du vil slette dit CDRW-medie (1. session"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Dit kort kan have 3D acceleration, men kun med XFree %s.\n"
-"Dit kort er understűttet af XFree %s som kan have bedre understűttelse i 2D."
+msgid "Ghostscript referencing"
+msgstr "Ghostscript referencer"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
+msgid "Bootloader"
+msgstr "Systemopstarter"
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Konfigurér kun kort \"%s\"%s"
+msgid "Move"
+msgstr "Flyt"
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Use Xinerama extension"
-msgstr "Brug Xinerama-udvidelse"
+msgid "Bootloader to use"
+msgstr "Systemopstarter der skal bruges"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configure all heads independently"
-msgstr "Konfigurér alle skærme uafhængigt"
+msgid "SMB server host"
+msgstr "SMB-servervært"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Hvilken konfiguration af XFree űnsker du?"
+msgid "Name Servers:"
+msgstr "Navne-servere:"
-#: ../../Xconfig/card.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "XFree configuration"
-msgstr "XFree konfiguration"
+msgid ""
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
+msgstr ""
+"\n"
+"Advarsel\n"
+"\n"
+"Læs venligst betingelserne nedenfor omhyggeligt. Hvis du ikke er enig i alt "
+"der stćr, mć du ikke installere indholdet af CD-en. Tryk pć 'Nægt' for at "
+"fortsætte installationen uden disse cdrommer.\n"
+"\n"
+"\n"
+"Visse komponenter pć den næste CD er ikke omfattet af GPL-licensen eller "
+"andre lignende licenser. Hver enkelt komponent er derfor omfattet af de "
+"betingelser der er beskrevet i dets egen licens. Læs derfor venligst "
+"betingelserne omhyggeligt og fűlg de opstillede betingelser nćr du bruger og/"
+"eller videredistribuerer komponenterne. Sćdanne licenser forhindrer normalt "
+"kopiering (sikkerhedskopiering undtaget), videredistribuering, at folk "
+"skiller programmet ad, eller ændrer i komponenterne. Ethvert brud pć "
+"licensen vil űjeblikkeligt fratage dig rettighederne beskrevet i den "
+"specifikke licens. Medmindre licensen giver dig lov hertil, vil det normalt "
+"ikke være tilladt at installere programmet pć mere end én maskine, eller "
+"bruge det pć et netværk. Hvis du er i tvivl, sć kontakt venligst producenten "
+"af komponenten direkte. Overdragelse til tredjemand eller kopiering af "
+"sćdanne komponenter inklusive dokumentationen er normalt forbudt.\n"
+"\n"
+"\n"
+"Alle rettigheder til komponenterne pć CD-en tilhűrer deres respektive "
+"skabere og er beskyttet af Lov om Ophavsret.\n"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Vælg hukommelsesmængde for dit grafikkort"
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Fjern denne printer fra Star Office/OpenOffice.org/GIMP.org"
-#: ../../Xconfig/card.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
msgstr ""
-"Dit system understűtter konfiguration af flere skærme\n"
-"Hvad vil du gűre?"
+"Linux Virtuel Server, brugt til at bygge en server med hűj ydelse og\n"
+"tilgængelighed."
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Multi-head configuration"
-msgstr "Flerskærms-konfiguration"
+msgid "4 billion colors (32 bits)"
+msgstr "4 milliarder farver (32 bit)"
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose an X server"
-msgstr "Vælg en X-server"
+msgid "Micronesia"
+msgstr "Mikronesien"
-#: ../../Xconfig/card.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "X server"
-msgstr "X-server"
+msgid "License"
+msgstr "Licens"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "64 MB or more"
-msgstr "64 Mb eller mere"
+msgid "This may take a moment to generate the keys."
+msgstr "Det kan tage lidt tid at generere nűglerne."
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "32 MB"
-msgstr "32 Mb"
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgstr ""
+"Automatisk identifikation af printere (Lokal, TCP/Socket og SMB-printere)"
-#: ../../Xconfig/card.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "16 MB"
-msgstr "16 Mb"
+msgid "Sagem (using pppoa) usb"
+msgstr "Sagem (der bruger pppoa) usb"
-#: ../../Xconfig/card.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "8 MB"
-msgstr "8 Mb"
+msgid ""
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
+msgstr ""
+"Der er opstćet en fejl - der kunne ikke findes nogen gyldige enheder, hvor "
+"der kan oprettes nye filsystemer. Undersűg din maskine for at finde ćrsagen "
+"til problemet"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "4 MB"
-msgstr "4 Mb"
+msgid "Starting the printing system at boot time"
+msgstr "Starter printsystemet ved opstart"
-#: ../../Xconfig/card.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "2 MB"
-msgstr "2 Mb"
+msgid "Do you want to start the connection at boot?"
+msgstr "Űnsker du at starte din forbindelse ved opstart?"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "1 MB"
-msgstr "1 Mb"
+msgid "Processor ID"
+msgstr "Processor-ID"
-#: ../../Xconfig/card.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "512 kB"
-msgstr "512 kb"
+msgid "Sound trouble shooting"
+msgstr "Problemlűsning omkring lyd"
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "256 kB"
-msgstr "256 kb"
+msgid "Polish (qwerty layout)"
+msgstr "Polsk (polsk layout)"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "activate now"
+msgstr "aktivér nu"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
"\n"
-"%s"
+"Drakbackup activities via CD:\n"
+"\n"
msgstr ""
-"Behold ændringer?\n"
-"Nuværende konfiguration er:\n"
"\n"
-"%s"
+"Drakbackup aktiviteter via CD:\n"
+"\n"
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Options"
-msgstr "Valg"
+msgid ""
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
+msgstr ""
+"Du er ved at installere printsystemet %s pć et system kűrende pć "
+"sikkerhedsniveau %s.\n"
+"\n"
+"Dette printsystem kűrer som en dæmon (baggrundsproces) som venter pć "
+"printeropgaver og behandler dem. Denne dæmon er ogsć tilgængelig for "
+"eksterne maskiner via netværket, og derfor er det et muligt angrebspunkt. "
+"Derfor bliver kun nogle fć udvalgte dæmoner startet op som standard i dette "
+"sikkerhedsniveau.\n"
+"\n"
+"Űnsker du virkelig at konfigurere udskrivning pć denne maskine?"
-#: ../../Xconfig/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Test"
-msgstr "Afprűv"
+msgid "Host \"%s\", port %s"
+msgstr "Vært \"%s\", port %s"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Resolution"
-msgstr "Oplűsning"
+msgid "This partition can't be used for loopback"
+msgstr "Denne partition kan ikke bruges til loopback"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Monitor"
-msgstr "Skærm"
+msgid "File already exists. Use it?"
+msgstr "Filen findes allerede. Skal den bruges?"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Graphic Card"
-msgstr "Grafikkort"
+msgid "received: "
+msgstr "modtaget: "
-#: ../../Xconfig/monitor.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Vertical refresh rate"
-msgstr "Lodret opdateringsfrekvens"
+msgid "Right Alt key"
+msgstr "Hűjre alt-tast"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Vandret opdateringsfrekvens"
+msgid "the list of alternative drivers for this sound card"
+msgstr "listen af alternative drivprogrammer for dette lydkort"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"De to kritiske parametre er den lodrette frekvens, som angiver hvor mange "
-"gange (per sekund) hele skærmbilledet bliver genopfrisket, og (vigtigst af "
-"alt) den vandrette frekvens, som angiver antallet af vandrette linier der "
-"kan tegnes pć skærmen hvert sekund.\n"
-"\n"
-"Det er MEGET VIGTIGT at du ikke angiver en skærmtype med "
-"opdateringsfrekvenser, der er stűrre end din skærms formćen: du risikerer at "
-"űdelægge din skærm.\n"
-"Hvis du er i tvivl, bűr du vælge en opsætning, som du med SIKKERHED ved\n"
-"at din skærm kan klare."
+msgid "Gateway"
+msgstr "Gateway"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr ""
-"Undersűgning for Plug'n Play mislykkedes. Vælg venligst den rigtige skærm"
+msgid "Scanner sharing"
+msgstr "Skannerdeling"
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Vendor"
-msgstr "Producent"
+msgid "Tonga"
+msgstr "Tonga"
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Plug'n Play"
-msgstr "Plug'n Play"
+msgid "Tunisia"
+msgstr "Tunesien"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose a monitor"
-msgstr "Vælg en skærmtype"
+msgid "Profile: "
+msgstr "Profil: "
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Graphics card: %s"
-msgstr "Grafikkort: %s"
+msgid ""
+"Click on a device in the left tree in order to display its information here."
+msgstr "Klik pć en enhed i det venstre træ for at vise dets oplysninger hér."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Vælg oplűsning og farvedybde"
+msgid "XawTV isn't installed!"
+msgstr "XawTV er ikke installeret!"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Resolutions"
-msgstr "Oplűsninger"
+msgid ""
+"Create/Transfer\n"
+"backup keys for SSH"
+msgstr ""
+"Opret/overfűr\n"
+"sikkerhedskopieringsnűgler for SSH"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 milliarder farver (32 bit)"
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr "Medtag ikke kritiske filer (passwd, group, fstab)"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 millioner (24 bit)"
+msgid "old static device name used in dev package"
+msgstr "gammel statisk enhedsnavn brugt i dev-pakke"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tusinde farver (16 bit)"
+msgid "This label is already used"
+msgstr "Denne mærkat er allerede brugt"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tusinde farver (15 bit)"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"Velkommen til guiden for printerinstallation\n"
+"\n"
+"Denne guide lader dig installere printere sluttet til denne maskine eller "
+"direkte til netværket.\n"
+"\n"
+"Hvis du har printere sluttet til denne maskine, sć tilslut og tænd dem nu sć "
+"de kan identificeres automatisk. Netværksprinterne skal ogsć være "
+"tilsluttede og tændte.\n"
+"\n"
+"Bemærk at det tager længere tid at identificere netværksprintere end at "
+"identificere lokalt tilsluttede printere. Sć deaktivér autoidentifikation af "
+"netværksprintere hvis du ikke har brug for dette.\n"
+"\n"
+"Klik pć \"Næste\" hvis du er klar og pć \"Annullér\" hvis du ikke vil "
+"installere printere nu."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 farver (8 bit)"
+msgid "After formatting partition %s, all data on this partition will be lost"
+msgstr ""
+"Efter formatering af partitionen %s vil alle data pć denne partition gć tabt"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Is this the correct setting?"
-msgstr "Er dette den korrekte indstilling?"
+msgid "Connection Time: "
+msgstr "Tilslutningstid: "
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Forsvinder om %d sekunder"
+msgid "select perm file to see/edit"
+msgstr "vælg perm-fil at se eller redigere"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/livedrake:1
#, c-format
msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
-msgstr ""
-"En fejl indtraf:\n"
-"%s\n"
-"Prűv at ændre nogen parametre"
-
-#: ../../Xconfig/test.pm:1
-#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
-"Advarsel: afprűvning af dette grafikkort kan fć din maskine til at fryse"
+"Indsæt installations-cdrom'en i dit cdrom-drev og tryk pć Ok, nćr det gjort\n"
+"Hvis du ikke har den - tryk pć Annullér, sć undgćs levende opgradering"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Űnsker du at afprűve konfigurationen?"
+msgid "Use group id for execution"
+msgstr "Brug gruppe-id ved udfűrelsen"
-#: ../../Xconfig/test.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Test of the configuration"
-msgstr "Test konfigurationen"
+msgid "Choose the default user:"
+msgstr "Vælg den forvalgte bruger:"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "What norm is your TV using?"
-msgstr "Hvilken standard bruger dit tv?"
+msgid "Gabon"
+msgstr "Gabon"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
-"Do you have this feature?"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
msgstr ""
-"Grafikkortet ser ud til at have en TV-UD-forbindelse.\n"
-"Den kan konfigureres sć den fungerer med billedbuffer\n"
"\n"
-"Til dette skal du tilslutte grafikkortet til tv'et inden du starter "
-"maskinen.\n"
-"Vælg dernæst indgangen \"TVout\" i starthćntereren.\n"
-"\n"
-"Har du denne funktion?"
+"Eksterne CUPS-servere behűves ikke at blive konfigureret her: \n"
+"disse printere vil automatisk blive fundet."
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
msgstr ""
-"Jeg kan sætte din maskine op til automatisk at starte X ved\n"
-"opstart. Űnsker du at starte X hver gang du genstarter?"
-
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "Start X ved systemstart"
+"Du kan vælge andre sprog der vil være tilgængelige efter installationen"
-#: ../../Xconfig/various.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 driver: %s\n"
+msgid "Domain"
+msgstr "Domæne"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86-server: %s\n"
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "Præcis RAM-mængde, hvis pćkrævet (fandt %d Mb)"
-#: ../../Xconfig/various.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Resolution: %s\n"
-msgstr "Oplűsninger %s\n"
+msgid ""
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
+"\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
+"\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
+msgstr ""
+"LILO og grub er opstartsindlæsere for GNU/Linux. Normalt er dette trin\n"
+"helt automatisk. DrakX vil analysere opstartssektoren pć disken og\n"
+"handle ud fra det som findes der.\n"
+"\n"
+" * Hvis en opstartssektor for Windows bliver fundet, vil den erstatte denne "
+"med\n"
+"en grub- eller LILO-opstartsektor. Pć denne mćde kan du indlæse enten\n"
+"GNU/Linux eller et andet operativsystem.\n"
+"\n"
+" * Hvis en opstartsektor for grub eller LILO bliver fundet, vil den blive "
+"erstattet\n"
+"med en ny.\n"
+"\n"
+"Hvis det ikke er mulig at afgűre dette automatisk, vil DrakX spűrge dig "
+"hvor\n"
+"opstartsindlæseren skal installeres."
-#: ../../Xconfig/various.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Color depth: %s\n"
-msgstr "Farvedybde: %s\n"
+msgid "Provider dns 2 (optional)"
+msgstr "Udbyder DNS 2 (valgfri)"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Grafik-hukommelse: %s kb\n"
+msgid "Boot device"
+msgstr "Opstartsenhed"
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Grafikkort: %s\n"
+msgid "Which partition do you want to resize?"
+msgstr "Hvilken partition űnsker du at ændre stűrrelse pć?"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Skærms lodrette frekvens: %s\n"
+msgid "United States Minor Outlying Islands"
+msgstr "Fjerne, mindre űer, USA"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Skærms vandrette frekvens: %s\n"
+msgid "A tool to monitor your logs"
+msgstr "Et værktűj til at overvćge dine logfiler"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor: %s\n"
-msgstr "Skærm: %s\n"
+msgid "Djibouti"
+msgstr "Djibouti"
-#: ../../Xconfig/various.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Muse-enhed: %s\n"
+msgid "detected on port %s"
+msgstr "Detekteret pć port %s"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Muse-type: %s\n"
+msgid "LPD"
+msgstr "LPD"
#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tastatur-type: %s\n"
+msgid "Graphics card: %s\n"
+msgstr "Grafikkort: %s\n"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Options: %s"
-msgstr "Valg: %s"
+msgid "Yaboot"
+msgstr "Yaboot"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mount point: "
-msgstr "Monteringssti: "
+msgid "Please check if you are using a DVDRAM device"
+msgstr "Markér om du bruger en DVDRAM-enhed"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Server: "
-msgstr "Server: "
+msgid "Splash selection"
+msgstr "Valg af opstartsskærm"
-#: ../../diskdrake/dav.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "URL'en skal begynde med http:// eller https://"
+msgid "Extended partition not supported on this platform"
+msgstr "Udvidet partition ikke understűttet pć denne platform"
-#: ../../diskdrake/dav.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Indtast LRL for WebDAV-serveren"
+msgid "ISDN Configuration"
+msgstr "ISDN konfiguration"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mount point"
-msgstr "Monteringssti"
+msgid "high"
+msgstr "hűj"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Server"
-msgstr "Server"
+msgid "Internet Connection Sharing"
+msgstr "Deling af internetforbindelse"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Mount"
-msgstr "Montér"
+msgid "Choose file"
+msgstr "Vælg fil"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Unmount"
-msgstr "Afmontér"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
+msgstr ""
+"Advarsel! En eksisterende brandmurkonfiguration er blevet fundet. Du skal "
+"muligvis lave manuelle rettelser efter installationen."
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New"
-msgstr "Ny"
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "Udskriver/Adgang til fotokort pć '%s'"
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
msgstr ""
-"WebDAV er en protokol som lader dig montere en webserver katalog lokalt\n"
-"og behandle det som et lokalt filsystem (givet at webserveren er "
-"konfigureret\n"
-"som en WebDAV-server). Hvis du űnsker at tilfűje WebDAV-monteringspunkter,\n"
-"sć vælg \"Ny\"."
+"Vil du aktivere udskrift pć printerne som nævnes ovenfor eller pć printerne "
+"i det lokale netværk?\n"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Benyt ``%s'' i stedet"
+msgid "Printer default settings"
+msgstr "Standardindstillinger for printer"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Type"
-msgstr "Type"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Standard PS2 mus med hjul"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Benyt ``Afmontér'' fűrst"
+msgid "Removing old printer \"%s\"..."
+msgstr "Fjerner gammel printer \"%s\"..."
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Delete"
-msgstr "Slet"
+msgid "Select a device !"
+msgstr "Vælg en enhed!"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create"
-msgstr "Opret"
+msgid "Remove selected server"
+msgstr "Fjern valgte server"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Filesystem types:"
-msgstr "Filsystems-typer:"
+msgid "French Southern Territories"
+msgstr "Franske sydlige territorier"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Empty"
-msgstr "Tom"
+msgid "the vendor name of the processor"
+msgstr "navnet pć producenten af processoren"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Windows"
-msgstr "Windows"
+msgid "All data on this partition should be backed-up"
+msgstr "Det bűr laves en backup af alle data pć denne partition"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "Installing package %s"
+msgstr "Installerer pakke %s"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "Checking device and configuring HPOJ..."
+msgstr "Tjekker enhed og konfigurerer HPOJ..."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Swap"
-msgstr "Swap"
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
+msgstr ""
+"For at du kan fć flere partitioner, skal du slette én, sć der kan oprettes "
+"en udvidet partition"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Journalised FS"
-msgstr "Journaliserende FS"
+msgid ""
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
+msgstr ""
+"Din printer blev konfigureret automatisk til at give dig adgang til fotokort-"
+"drevene fra din PC. Nu kan du fć adgang til dine fotokort med det grafiske "
+"program 'MtoolsFM' (Menu: 'Programmer' -> 'Filværktűjer' -> 'Mtools "
+"Filadministration') eller kommandolinjeværktűjet 'mtools' (indtast 'man "
+"mtools' pć kommandolinjen for mere information). Du finder kortets filsystem "
+"under drevbogstavet 'p:', eller fűlgende drevbogstaver hvis du har mere end "
+"én HP-printer med fotokortdrev. I 'MtoolsFM' kan du skifte mellem "
+"drevbogstaver med feltet i de űverste hűjre hjűrner af fillisterne."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Ext2"
-msgstr "Ext2"
+msgid "Choose packages to install"
+msgstr "Vælg pakker til installation"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No hard drives found"
-msgstr "Ingen diskdrev fundet"
+msgid ""
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
+msgstr ""
+"\n"
+" Nogle fejl under sendmail kommer fra \n"
+" en dćrlig konfiguration af postfix. For at lűse dette skal du\n"
+" sætte myhostname eller mydomain i /etc/postfix/main.cf\n"
+"\n"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Please click on a partition"
-msgstr "Klik pć en partition"
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr "Alle eksisterende partitioner og deres data vil gć tabt pć drev %s"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
msgstr ""
-"Du har én stor MicroSoft Windows partition.\n"
-"Jeg foreslćr at du fűrst ændrer stűrrelsen pć partitionen\n"
-"(klik pć den, og klik herefter pć \"Stűrrelsesændring\")"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Choose action"
-msgstr "Vælg handling"
+"Dit system har ikke nok plads tilbage til en installation eller opgradering "
+"(%d > %d)"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Wizard"
-msgstr "Vejleder"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
+msgstr ""
+"Alle printere behűver et navn (f.eks. 'printer').\n"
+"Beskrivelsen og lokaliseringsfelterne behűver ikke \n"
+"udfyldes. De er kommentarer til brugerne."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
msgstr ""
-"Hvis du planlægger at bruge Yaboot, skal du huske at efterlade fri plads pć\n"
-"begyndelsen af disken (2048 sektorer skulle være nok)"
+"'%s': Et klik pć '%s'-knappen vil ćbne vejlederen for printerkonfigurering. "
+"Kig i det tilhűrende kapitel i 'Startvejledningen' for mere information om "
+"hvordan man opsætter en ny printer. Grænsefladen\n"
+"præsenteret der ligner den som bruges pć installationstidspunktet."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Lav gerne en sikkerhedkopi af dine data fűrst"
+msgid "Bhutan"
+msgstr "Bhutan"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Read carefully!"
-msgstr "Læs omhyggeligt!"
+msgid "Network interface"
+msgstr "Netværksgrænsesnit"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Encryption key (again)"
-msgstr "Krypteringsnűgle (igen)"
+msgid "Reading printer data..."
+msgstr "Læser printerdata ..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Encryption key"
-msgstr "Krypteringsnűgle"
+msgid "Korean keyboard"
+msgstr "Koreansk tastatur"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "The encryption keys do not match"
-msgstr "Krypteringsnűglerne stemmer ikke overens"
+msgid "Not connected"
+msgstr "Ikke tilsluttet"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
+msgid "Greek"
+msgstr "Græsk"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
msgstr ""
-"Denne krypteringsnűgle er for nem at gætte (skal mindst være pć %d tegn)"
+"Argumenter: (arg)\n"
+"\n"
+"Hvis \\fIarg\\fP = ALL tillades /etc/issue og /etc/issue.net at eksistere. "
+"Hvis \\fIarg\\fP = NONE er ingen problemer tilladt \n"
+"ellers er kun /etc/issue tilladt."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "Vælg din krypteringsnűgle for filsystemet"
+msgid "Saint Kitts and Nevis"
+msgstr "Saint Kitts og Nevis"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Filesystem encryption key"
-msgstr "Krypteringsnűgle for filsystem"
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
+msgstr ""
+"Overfűrsel klar.\n"
+"Du vil mćske kontrollere at du kan logge ind pć serveren med:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"uden at blive spurgt om en adgangskode."
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Type: "
-msgstr "Type: "
+msgid "Enable OF Boot?"
+msgstr "Skal det være muligt at starte fra OF?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "on channel %d id %d\n"
-msgstr "pć kanal %d id %d\n"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "Du kan ikke bruge JFS pć partitioner mindre end 16Mb"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partitionstabel-type: %s\n"
+msgid "Monitor VertRefresh: %s\n"
+msgstr "Skærms lodrette frekvens: %s\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diske %s\n"
+msgid "path"
+msgstr "sti"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Info: "
-msgstr "Info: "
+msgid "Mount point"
+msgstr "Monteringssti"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Opbygning: %s cylindre, %s hoveder, %s sektorer\n"
+msgid ""
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
+msgstr ""
+"En fejl indtraf:\n"
+"%s\n"
+"Prűv at ændre nogen parametre"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Size: %s\n"
-msgstr "Stűrrelse: %s\n"
+msgid "Restore system"
+msgstr "Genskab system"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Read-only"
-msgstr "Skrivebeskyttet"
+msgid ""
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
+msgstr ""
+"Dette er maskinerne pć hvilke de lokalt forbundne skannere skal gűres "
+"tilgængelige:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Device: "
-msgstr "Enhed: "
+msgid "The DHCP end ip"
+msgstr "Stutnings-ip pć DHCP"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Denne specielle Bootstrap-\n"
-"partition er for at\n"
-"dual-boote dit system.\n"
+msgid "Another one"
+msgstr "En anden"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Drakbackup"
+msgstr "Drakbackup"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Colombia"
+msgstr "Columbia"
+
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
+"Current configuration of `%s':\n"
"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
msgstr ""
+"Nuværende konfiguration af `%s':\n"
"\n"
-"Denne partition er nok\n"
-"en driver-partition. Du skal\n"
-"nok bare lade den være.\n"
+"Netværk: %s\n"
+"IP-adresse: %s\n"
+"IP-attribut: %s\n"
+"Driver: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback-filnavn: %s"
+msgid "Plug'n Play"
+msgstr "Plug'n Play"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diske %s\n"
+msgid "Reunion"
+msgstr "Réunion"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Chunk size %s\n"
-msgstr "Enhedsstűrrelse %s\n"
+msgid "Details"
+msgstr "Detaljer"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Level %s\n"
-msgstr "Niveau %s\n"
+msgid "For security reasons, it will be disconnected now."
+msgstr "Af sikkerhedsgrunde vil det blive afbrudt nu."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partition som opstartes som standard\n"
-" (gælder kun MS-DOS-opstart, ikke LILO)\n"
+msgid "Synchronization tool"
+msgstr "Synkroniseringsværktűj"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr ""
-"Loopback-fil(er):\n"
-" %s\n"
+msgid "Checking your system..."
+msgstr "Tjekker dit system..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+msgid "Print"
+msgstr "Udskriv"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mounted\n"
-msgstr "Monteret\n"
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
+"Indsæt bćndet med volumeetiket %s\n"
+" i bćndenheden %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not formatted\n"
-msgstr "Ikke formateret\n"
+msgid "Mongolia"
+msgstr "Mongoliet"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Formatted\n"
-msgstr "Formateret\n"
+msgid "Mounted\n"
+msgstr "Monteret\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cylinder %d til %d\n"
+msgid "Graphical Interface"
+msgstr "Grafisk grænseflade"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektorer"
+msgid "Restore Users"
+msgstr "Genskab brugere"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Size: %s"
-msgstr "Stűrrelse: %s"
+msgid "Encryption key for %s"
+msgstr "Krypteringsnűgle for %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Start: sector %s\n"
-msgstr "Start: sektor %s\n"
+msgid ""
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
+msgstr ""
+"Portmapper hćndterer RPC tilslutninger, som bliver brugt af protokoller som "
+"NFS og NIS. Portmap serveren skal kűre pć maskiner som bruger protokoller "
+"der udnytter RPC mekanismen"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Name: "
-msgstr "Navn: "
+msgid "Detected hardware"
+msgstr "Fundet maskinel"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS-drevbogstav: %s (bare et gæt)\n"
+msgid "Mauritius"
+msgstr "Mauritius"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "partition %s is now known as %s"
-msgstr "partition %s er nu kendt som %s"
+msgid "Myanmar (Burmese)"
+msgstr "Myanmar (Burmesisk)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Removing %s"
-msgstr "Fjerner %s"
+msgid "Enabling swap partition %s"
+msgstr "Formaterer swap-partition %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Copying %s"
-msgstr "Kopierer %s"
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgstr ""
+"Der er ingen FAT-partitioner at bruge som loopback (eller ikke nok plads "
+"tilbage)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Moving files to the new partition"
-msgstr "Flytter filer til den nye partition"
+msgid "Armenian (old)"
+msgstr "Armensk (gammel)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
msgstr ""
-"Katalog %s indeholder allerede nogen data\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Hide files"
-msgstr "Skjul filer"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Move files to the new partition"
-msgstr "Flyt filer til den nye partition"
+"En printer med navnet \"%s\" eksisterer allerede pć %s. \n"
+"Klik \"Overfűr\" for at overskrive.\n"
+"Du kan ogsć give et nyt printernavn, eller overspringe denne printer."
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Efter formatering af partitionen %s vil alle data pć denne partition gć tabt"
+msgid ""
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
+msgstr "Find lűsningerne pć dine problemer via MandrakeSofts online-support."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Du skal genstarte maskinen for at aktivere ændringerne"
+msgid ", host \"%s\", port %s"
+msgstr ", vært \"%s\", port %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Partitionstabellen for disk %s vil nu blive skrevet pć disken!"
+msgid "Monaco"
+msgstr "Monaco"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "Pakken %s kræves. Űnsker du at installere den?"
+msgid "%s formatting of %s failed"
+msgstr "%s formatering af %s mislykkedes"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "What type of partitioning?"
-msgstr "Hvilken slags partitionering?"
+msgid "Partitioning failed: %s"
+msgstr "Partitionering mislykkedes: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Vær forsigtig: denne operation er farlig."
+msgid "Canada (cable)"
+msgstr "Canada (kabel)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "chunk size"
-msgstr "enhedsstűrrelse"
+msgid "Upgrade"
+msgstr "Opgradér"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "level"
-msgstr "niveau"
+msgid "Workstation"
+msgstr "Arbejdsstation"
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "device"
-msgstr "enhed"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"Installerer pakke %s\n"
+"%d%%"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Various"
-msgstr "Diverse"
+msgid "Kyrgyzstan"
+msgstr "Kirgisistan"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Mount options"
-msgstr "Modulindstillinger"
+msgid "With basic documentation"
+msgstr "Med basal dokumentation"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "File already exists. Use it?"
-msgstr "Filen findes allerede. Skal den bruges?"
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anacron en periodisk kommando planlægger"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "Filen er allerede brugt af en anden loopback, vælg en anden fil"
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"Du skal have en rod partition. For at fć dette, lav en ny partition (eller "
+"vælg en eksisterende).\n"
+"Vælg sć kommandoen \"Monterings-sti\" og sæt den til `/'"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Give a file name"
-msgstr "Giv et filnavn"
+msgid "Proxy should be http://..."
+msgstr "Proxy skal være http://..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Filesystem type: "
-msgstr "Filsystemstype: "
+msgid "South Africa"
+msgstr "Sydafrika"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Size in MB: "
-msgstr "Stűrrelse i Mb: "
+msgid "Western Sahara"
+msgstr "Vestlig Sahara"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Loopback file name: "
-msgstr "Loopback-filnavn: "
+msgid "Etherboot Floppy/ISO"
+msgstr "Etherboot diskette/ISO"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Loopback"
-msgstr "Loopback"
+msgid "Modify printer configuration"
+msgstr "Ændr printerkonfiguration"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "Denne partition kan ikke bruges til loopback"
+msgid "Choose a partition"
+msgstr "Vælg en partition"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "LVM name?"
-msgstr "LVM-navn?"
+msgid "Edit current rule"
+msgstr "Redigér aktuelle regel"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "new"
-msgstr "ny"
+msgid "%s"
+msgstr "%s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Vælg en eksisterende LVM som skal udvides"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
+msgstr ""
+"Argumenter: (arg)\n"
+"\n"
+"Aktivér/deaktivér logning af IPv4 mærkelige pakker."
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Vælg en eksisterende RAID som skal udvides"
+msgid "Please test the mouse"
+msgstr "Test musen"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Moving partition..."
-msgstr "Flytter partition..."
+msgid "Other Media"
+msgstr "Andet medie"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Moving"
-msgstr "Flytter"
+msgid "Backup system files"
+msgstr "Lav sikkerhedskopi af systemfiler"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "Hvilken sektor űnsker du at flytte den til?"
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Sector"
msgstr "Sektor"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "Hvilken disk űnsker du at flytte den til?"
+msgid "Qatar"
+msgstr "Qatar"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Move"
-msgstr "Flyt"
+msgid "LDAP Base dn"
+msgstr "LDAP grundlæggende dn"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "New size in MB: "
-msgstr "Ny stűrrelse i Mb: "
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr ""
+"Du kan ikke vælge denne pakke, da der ikke er nok plads tilbage til at "
+"installere den"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Choose the new size"
-msgstr "Vælg den nye stűrrelse"
+msgid "generate auto-install floppy"
+msgstr "lav autoinstallations-diskette"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Resize"
-msgstr "Stűrrelsesændring"
+msgid "Dialing mode"
+msgstr "Opringningsmćde"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Efter ændring af stűrrelsen af partition %s vil alle data pć denne partition "
-"gć tabt"
+msgid "File sharing"
+msgstr "Fildeling"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Det bűr laves en backup af alle data pć denne partition"
+msgid "Clean /tmp at each boot"
+msgstr "Rens /tmp ved hver systemopstart"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This partition is not resizeable"
-msgstr "Stűrrelsen pć denne partition kan ikke ændres"
+msgid "Malawi"
+msgstr "Malawi"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Udregner FAT-filsystemets grænser"
+msgid "Please choose your type of mouse."
+msgstr "Vælg muse-type."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "Hvor űnsker du at montere %s?"
+msgid "class of hardware device"
+msgstr "Klasse af maskinenhed"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
msgstr ""
-"Kan ikke fjerne monteringssti, da denne partition bliver brugt til "
-"loopback.\n"
-"Fjern loopback fűrst"
+"Dette er maskinerne og netværkerne pć hvilke de lokalt forbundne printere "
+"skal gűres tilgængelige:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Hvor űnsker du at montere partitionen %s?"
+msgid "United Kingdom"
+msgstr "Storbritannien"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "Hvor űnsker du at montere loopback-filen %s?"
+msgid "running"
+msgstr "kűrer"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "Skifter fra ext2 til ext3"
+msgid "default"
+msgstr "standard"
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which filesystem do you want?"
-msgstr "Hvilket filsystem űnsker du at bruge?"
+msgid "Indonesia"
+msgstr "Indonesien"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Change partition type"
-msgstr "Skift partitionstype"
+msgid "France [SECAM]"
+msgstr "Frankrig [SECAM]"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "restrict"
+msgstr "begræns"
+
+#: ../../pkgs.pm:1
+#, c-format
+msgid "must have"
+msgstr "skal have"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
msgstr ""
-"Efter type-ændring af partition %s vil alle data pć denne partition gć tabt"
+"CUPS understűtter ikke printere pć Novellservere eller printere som sender "
+"dataene ind i en frit-formet kommando.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remove the loopback file?"
-msgstr "Fjern loopback-filen?"
+msgid "Senegal"
+msgstr "Senegal"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Command line"
+msgstr "Kommandolinje"
+
+#: ../../share/advertising/08-store.pl:1
#, c-format
msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
msgstr ""
-"Du kan ikke oprette en ny partition\n"
-"(fordi du er oppe pć det maksimale antal primære partitioner)\n"
-"Fjern fűrst en primær partition og opret en udvidet partition."
+"Vores komplette udvalg af Linux-lűsninger, sć vel som specialtilbud pć "
+"produkter og andre godbidder, er tilgængelige via nettet i vores e-butik:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Preference: "
-msgstr "Præference: "
+msgid "access to administrative files"
+msgstr "adgang til administrative filer"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Start sector: "
-msgstr "Startsektor: "
+msgid ""
+"Error during sendmail.\n"
+" Your report mail was not sent.\n"
+" Please configure sendmail"
+msgstr ""
+"Fejl ved sendmail.\n"
+" Din rapport blev ikke sendt.\n"
+" Konfigurér venligst sendmail"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Create a new partition"
-msgstr "Opret en ny partition"
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ", multi-funktions-enhed pć parallel port \\#%s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Use for loopback"
-msgstr "Loopback anvendelse"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
+msgstr ""
+"Argumenter: (værdi)\n"
+"\n"
+"Sæt skallens tidsudlűb. En værdi pć nul betyder intet tidsudlűb."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Modify RAID"
-msgstr "Ændr RAID"
+msgid "Montserrat"
+msgstr "Montserrat"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Remove from LVM"
-msgstr "Fjern fra LVM"
+msgid "Automatic dependencies"
+msgstr "Automatiske afhængigheder"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Remove from RAID"
-msgstr "Fjern fra RAID"
+msgid "Swap"
+msgstr "Swap"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Add to LVM"
-msgstr "Tilfűj til LVM"
+msgid "Connecting to the Internet "
+msgstr "Forbindelse til Internettet "
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add to RAID"
-msgstr "Tilfűj til RAID"
+msgid "Restore Other"
+msgstr "Genskab andet"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Format"
-msgstr "Formatér"
+msgid "TV card"
+msgstr "TV-kort"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Detailed information"
-msgstr "Detaljeret information"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "Printer pć SMB/Windows 95/98/NT server"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Trying to rescue partition table"
-msgstr "Forsűger at redde partitionstabellen"
+msgid ", "
+msgstr ", "
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
msgstr ""
-"Indsæt en diskette i diskettedrevet\n"
-"Alle data pć disketten vil blive slettet"
-
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Warning"
-msgstr "Advarsel"
+"Argumenter: (umask)\n"
+"\n"
+"Sæt umask for root."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select file"
-msgstr "Vælg fil"
+msgid "Remove selected host/network"
+msgstr "Fjern valgte vært/netværk"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
msgstr ""
-"Kopien af partitionstabellen har ikke samme stűrrelse\n"
-"Fortsæt alligevel?"
+"Postfix er en transport-agent for post, som bruges af programmer der flytter "
+"post fra en maskine til en anden."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Removable media automounting"
-msgstr "Automontering af flytbare medier"
+msgid "Disconnection from the Internet failed."
+msgstr "Nedkopling fra Internet mislykkedes."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Reload partition table"
-msgstr "Genindlæs partitionstabel"
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
+msgstr ""
+"Her kan du vælge tasten eller tastekombinationen som \n"
+"lader dig skifte mellem forskellige tastaturlayouter\n"
+"(dvs latinsk eller ikke-latinsk)."
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Rescue partition table"
-msgstr "Redder partitionstabel"
+msgid "Network Hotplugging"
+msgstr "Hotplugging af netværk"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Restore partition table"
-msgstr "Genskaber partitionstabel"
+msgid "if set to yes, reports check result to tty."
+msgstr "hvis sat til ja, sć rapportér kontrolresultat pć tty-en."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Save partition table"
-msgstr "Gem partitionstabel"
+msgid "Restore From CD"
+msgstr "Genskab fra cd"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-"For at du kan fć flere partitioner, skal du slette én, sć der kan oprettes "
-"en udvidet partition"
+"Du er ved at konfigurere din maskine til at dele sin internetforbindelse.\n"
+"Med denne mulighed vil andre maskiner pć dit lokale netværk kunne bruge "
+"internetforbindelsen pć denne maskine.\n"
+"\n"
+"Forsikr dig om at du har konfigureret din internetforbindelse med "
+"drakconnect fűr du gćr videre.\n"
+"\n"
+"Bemærk: du skal bruge en dediceret netværksadapter, for at lave et lokalt "
+"netværk (LAN)."
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "I can't add any more partition"
-msgstr "Kan ikke tilfűje flere partitioner"
+msgid ""
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr ""
+"Vælg hvilken netværksadapter du űnsker at bruge til at lave forbindelse til "
+"Internettet med."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "All primary partitions are used"
-msgstr "Alle primære partitioner er brugt"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr "Adgang til fotohukommelseskort pć din HP-multifunktionsenhed"
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Hard drive information"
-msgstr "Drev-information"
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
+"Forűg din maskines ydelse med hjælp fra et et udvalg af firmaer som tilbyder "
+"professionelle lűsninger kompatible med Mandrake Linux. "
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Auto allocate"
-msgstr "Allokér automatisk"
+msgid "Internet Connection Sharing is now disabled."
+msgstr "Deling af internetforbindelse er nu slćet fra"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Clear all"
-msgstr "Slet alt"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr "hvis sat til ja, sć efterprűv tjeksummer pć suid/sgid-filer."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Űnsker du at gemme /etc/fstab-ændringerne?"
+msgid "Latin American"
+msgstr "Latinamerikansk"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Afslut uden at skrive partitionstabellen?"
+msgid "Japanese text printing mode"
+msgstr "Printertilstand for japansk tekst"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Quit without saving"
-msgstr "Afslut uden at gemme"
+msgid "Old device file"
+msgstr "Gammel enhedsfil"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Continue anyway?"
-msgstr "Fortsæt alligevel?"
+msgid "Info: "
+msgstr "Info: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Toggle to expert mode"
-msgstr "Normal -> Ekspert"
+msgid "Button `%s': %s"
+msgstr "Knap '%s': %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Toggle to normal mode"
-msgstr "Ekspert -> Normal"
+msgid "Please wait"
+msgstr "Vent venligst"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Undo"
-msgstr "Fortryd"
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Exit"
-msgstr "Afslut"
+msgid "None"
+msgstr "Ingen"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose a partition"
-msgstr "Vælg en partition"
+msgid "The entered IP is not correct.\n"
+msgstr "Den indtastede IP er ikke korrekt.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose another partition"
-msgstr "Vælg en ny partition"
+msgid "Ethernet Card"
+msgstr "Ethernet-kort"
-#: ../../diskdrake/removable.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Change type"
-msgstr "Skift type"
+msgid "Info"
+msgstr "Info"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Search servers"
-msgstr "Sűg efter servere"
+msgid "Install"
+msgstr "Installér"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Domain"
-msgstr "Domæne"
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr ""
+"Klik pć '%s ->' hvis du űnsker at slette alle data og partitioner der ligger "
+"pć dette diskdrev. Vær omhyggelig, efter klik pć '%s ->' vil du ikke være i "
+"stand til at redde nogen data eller partitioner, der ligger pć dette "
+"diskdrev, inklusive alle Windows data.\n"
+"Klik pć '<- %s' for at stoppe denne handling uden at tabe nogen data og "
+"partitioner der er tilstede pć dette diskdrev."
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Username"
-msgstr "Brugernavn"
+msgid "Exit install"
+msgstr "Afslut installation"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Please enter your username, password and domain name to access this host."
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
msgstr ""
-"Indtast venligst dit brugernavn, din adgangskode og dit domænenavn for at fć "
-"adgang til denne vært."
+"Alt er blevet konfigureret.\n"
+"Du kan nu dele din internetforbindelse med andre maskiner pć dit lokale "
+"netværk, ved at bruge DHCP."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Domain Authentication Required"
-msgstr "Domænegodkendelse pćkrævet"
+msgid "Remote CUPS server"
+msgstr "Ekstern CUPS server"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Another one"
-msgstr "En anden"
+msgid "Sun - Mouse"
+msgstr "Sun-mus"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Which username"
-msgstr "Hvilket brugernavn"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
+msgstr ""
+"Der er kun én konfigureret netværksadapter i dit system:\n"
+"\n"
+"%s\n"
+"\n"
+"Jeg skal til at sætte dit lokalnet pć med den adapter."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Can't login using username %s (bad password?)"
-msgstr "Kan ikke logge ind med brugernavn %s (forkert adgangskode?)"
+msgid "Minimal install"
+msgstr "Minimal installation"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "cpu # "
-msgstr "cpu-nummer "
+msgid "Ethiopia"
+msgstr "Etiopien"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "SMBus controllers"
-msgstr "SMBus-kontrollers"
+msgid "Devanagari"
+msgstr "Devanagari"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "USB controllers"
-msgstr "USB-kontrolkort"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr ""
+"- pci-enheder: dette giver PCI slottet, enheden og funktionen for dette "
+"kort\n"
+"- eide-enheder: enheden er enten en slave- eller mester-enhed\n"
+"- scsi-enheder: scsi-bussen og scsi enheds-id'er"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "SCSI controllers"
-msgstr "SCSI-kontrolkort"
+msgid "Total size: %d / %d MB"
+msgstr "Total stűrrelse: %d / %d Mb"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Firewire controllers"
-msgstr "Firewire-kontrolkort"
+msgid "disabled"
+msgstr "deaktiveret"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "(E)IDE/ATA kontrolkort"
+msgid "Search for new scanners"
+msgstr "Sűg efter nye skannere..."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Joystick"
-msgstr "Joystick"
+msgid "Disabling servers..."
+msgstr "Slćr servere fra..."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Scanner"
-msgstr "Skanner"
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr ""
+"Vælg tidsinterval mellem\n"
+"hver sikkerhedskopiering"
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Unknown/Others"
-msgstr "Ukendt|andre"
+msgid "Installation of %s failed. The following error occured:"
+msgstr "Installationen af %s mislykkedes. Fűlgende fejl opstod:"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Bridges and system controllers"
-msgstr "Broer og system-kontrolkort"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr "Kan ikke opstarte mkinitrd -f /boot/initrd-%s.img %s."
-#: ../../harddrake/data.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Modem"
-msgstr "Modem"
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
+msgstr ""
+"Du har valgt fűlgende servere: %s\n"
+"\n"
+"\n"
+"Disse servere er aktiveret som standard. De har ingen kendte "
+"sikkerhedsproblemer, men nogen nye kan blive fundet. I sć tilfælde skal du "
+"opgradere sć snart som mulig.\n"
+"\n"
+"\n"
+"Űnsker du virkelig at installere disse servere?\n"
-#: ../../harddrake/data.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Ethernetcard"
-msgstr "Ethernet-kort"
+msgid "Network printer (TCP/Socket)"
+msgstr "Netværksprinter (TCP/sokkel)"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Processors"
-msgstr "Processorer"
+msgid "Backup User files..."
+msgstr "Sikkerhedskopiér brugerfiler..."
-#: ../../harddrake/data.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Webcam"
-msgstr "Webcam"
+msgid "Install system"
+msgstr "Installér system"
-#: ../../harddrake/data.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Soundcard"
-msgstr "Lydkorl"
+msgid "First DNS Server (optional)"
+msgstr "Fűrste DNS-server (valgfri)"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Other MultiMedia devices"
-msgstr "Andre multimedie-enheder"
+msgid ""
+"Alternatively, you can specify a device name/file name in the input line"
+msgstr "Alternaltivt kan duangive et enhedsnavn/filnavn pć inddatalinjen"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Tvcard"
-msgstr "TV-kort"
+msgid "dhcpd Config..."
+msgstr "Konfigurér dhcpd..."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Videocard"
-msgstr "Videokort"
+msgid "The setup has already been done, but it's currently disabled."
+msgstr "Indstilling er allerede gjort. men er de-aktiveret for nærværende."
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Tape"
-msgstr "Bćnd"
+msgid "LILO/grub Installation"
+msgstr "LILO/grub-installering"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
+msgid "Israeli"
+msgstr "Israelsk"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "CD/DVD burners"
-msgstr "CD/DVD-brændere"
+msgid "load setting"
+msgstr "indlæs opsætning"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "CDROM"
-msgstr "cd-rom"
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "Printer \"%s\" pć server \"%s\""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Disk"
-msgstr "Disk"
+msgid "Floppy can be removed now"
+msgstr "Diskette kan fjernes nu"
-#: ../../harddrake/data.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Zip"
-msgstr "Zip"
+msgid "Truly minimal install"
+msgstr "Virkeligt minimale installation"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Floppy"
-msgstr "Diskette"
+msgid "Denmark"
+msgstr "Danmark"
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Let me pick any driver"
-msgstr "Lad mig vælge hvilkensomhelst driver"
+msgid "Moving partition..."
+msgstr "Flytter partition..."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Driver:"
-msgstr "Drivprogram:"
+msgid "(This) DHCP Server IP"
+msgstr "(Denne) DHCP-servers IP-adresse"
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
-"Hvis du virkelig mener du véd hvilken driver der er den rette til dit kort "
-"kan du vælge én fra listen ovenfor.\n"
-"\n"
-"Den aktuelle driver for dit %s-lydkort er \"%s\" "
+msgid "Test of the configuration"
+msgstr "Test konfigurationen"
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr "Vælger en vilkćrlig driver"
+msgid "Installing %s ..."
+msgstr "Installerer %s..."
-#: ../../harddrake/sound.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
msgstr ""
-"Den klassiske metode for at fejlsűge lydopsætningten er at kűre fűlgende\n"
-"kommandoer:\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" vil vise hvilken driver lydkortet bruger \n"
-"som standard\n"
-"- \"grep sound-slot /etc/modules.conf\" vil vise hvilken driver som er i "
-"brug\n"
-"\n"
-"- \"/sbin/lsmod\" lader dig se om denne driver er indlæst\n"
+"Hvis du fortalte installeringen at du űnskede at vælge individuelle pakker, "
+"vil den vise et træ med alle pakker opdelt i grupper og undergrupper. Under "
+"gennembladring af træet kan du udvælge hele grupper, undergrupper eller "
+"individuelle pakker.\n"
"\n"
-"- \"/sbin/chkconfig --list sound\" og \"/sbin/chkconfig --list alsa\" vil\n"
-"vise om disse tjenester er sat op til at startes.\n"
+"Hver gang du udvælger en pakke i træet vil en beskrivelse fremkomme til "
+"hűjre for at lade dig vide formćlet med pakken. \n"
"\n"
-"- \"aumix -q\" vil vise om lyden er slukket ned eller ikke\n"
+"!! Nćr en server-pakke er blevet valgt, enten fordi du specielt valgte den "
+"individuelle pakke, eller fordi den var en del af en gruppe af pakker, vil "
+"du blive spurgt om at bekræfte atdu virkelig űnsker at installere disse "
+"servere. Som standard under Linux Mandrake bliver installerede servere "
+"startet op ved opstart af maskinen. Selvom de er sikre og ikke har nogen "
+"kendte problemer pć udgivelsestidspunktet for distributionen, er det absolut "
+"muligt at sikkerhedshuller blev opdaget efter at denne version af Mandrake "
+"Linux blev færdiggjort. Hvis du ikke véd hvad en bestemt tjeneste vil gűre "
+"eller hvorfor den skal installeres, sć klik '%s' her. Et klik med '%s' her "
+"vil installere de nævnte servere og de vil som standard blive startet "
+"automatisk under opstarten!!\n"
+"\n"
+"'%s'-valget deaktiverer advarselsdialogen, som vises hver gang "
+"installeringsprogrammet automatisk vælger en pakke for at lűse et "
+"afhængighedsproblem Nogen pakker har relationer mellem hinanden sć "
+"installation af en pakke kræver at nogen andre programmer skal være "
+"installeret. Installationsprogrammet kan beregne hvilke pakker der er krævet "
+"for at tilfredsstille en afhængighed for at kunne færdiggűre en installation "
+"problemfrit.\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" vil vise hvilke programmer som bruger "
-"lydkortet\n"
-
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Sound trouble shooting"
-msgstr "Problemlűsning omkring lyd"
+"Det klejne disketteikon i bunden af listen muliggűr indlæsning af en "
+"pakkeliste udvalgt ved en tidligere installation. Dette er nyttigt hvis du "
+"har et antal maskiner som du űnsker at konfigurere pć samme mćde. Klik pć "
+"denne ikon vil bede dig om at indsætte en diskette tidligere frembragt ved "
+"slutningen pć en anden installation. Se rćd nr to i det sidste trin for "
+"hvordan en sćdan diskette kan laves."
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "Drivprogrammet %s for lydkortet er ikke listet"
+msgid "Choose your filesystem encryption key"
+msgstr "Vælg din krypteringsnűgle for filsystemet"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unkown driver"
-msgstr "Ukendt drivprogram"
+msgid ""
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
+msgstr ""
+"Vælg cd/dvd-enhed.\n"
+"(Tryk Enter for at overfűre indstillinger til andre felter.\n"
+"Dette felt behűves ikke, det er kun et værktűj for at udfylde formularen.)"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "Der findes intet kendt drivprogram for lydkortet (%s)"
+msgid "Andorra"
+msgstr "Andorra"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No known driver"
-msgstr "Ingen kendt driverrutine"
+msgid "Sierra Leone"
+msgstr "Sierra Leone"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-"Der findes ingen fri driver for lydkortet (%s) men der er en leverandűrejet "
-"driver pć '%s'"
+msgid "Botswana"
+msgstr "Botswana"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "No open source driver"
-msgstr "Ingen open source driverrutine"
+msgid "(default value: %s)"
+msgstr "(Forvalgt: %s)"
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Vent venligst... Sætter konfigurationen i anvendelse"
+msgid "Alternative test page (Letter)"
+msgstr "Alternativ testside (letter)"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"The old \"%s\" driver is blacklisted.\n"
+"DHCP Server Configuration.\n"
"\n"
-"It has been reported to oops the kernel on unloading.\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-"Den gamle \"%s\"-driver er sortlistet.\n"
+"Konfiguration af DHCP-server.\n"
"\n"
-"Den er blevet rapporteret at lave fejl i kernen ved afslutningen.\n"
+"Her kan du vælge forskellige muligheder for konfigurationen af DHCP-"
+"serveren.\n"
+"Hvis du ikke kender betydningen af en valgmulighed, sć lad den blot være som "
+"den er.\n"
"\n"
-"Den nye \"%s\"-driver vil fűrst blive brugt ved næste systemopstart."
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Trouble shooting"
-msgstr "Problemlűsning"
+msgid "Choose an X server"
+msgstr "Vælg en X-server"
-#: ../../harddrake/sound.pm:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Swap partition size in MB: "
+msgstr "Swap-partitions stűrrelse i Mb: "
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
+"Other (not drakbackup)\n"
+"keys in place already"
msgstr ""
-"OSS (Open Sound System) var den fűrste lyd-API. Det er den fűrste OS-"
-"uafhængige lyd-API (Den er tilgængelig pć de fleste Unix-systemer) men den "
-"er en meget basal og begrænset API.\n"
-"Ydermere genopfandt alle OSS-drivere hjulet.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) er en modulær arkitektur som\n"
-"understűtter en ganske stor mængde ISA-, USB- og PCI-kort.\n"
-"\n"
-"Den tilbyder ogsć en meget hűjere API end OSS.\n"
-"\n"
-"For at bruge ALSA kan man enten bruge:\n"
-"- den gamle OSS-kompatibilitetes-api\n"
-"- den nye ALSA API som tilbyder mange forbedrede faciliteter men som kræver "
-"brug af ALSA-biblioteket.\n"
+"Andet (ikke drakbackup)\n"
+"nűglerne findes allerede"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "No changes to backup!"
+msgstr "Ingen ændringer til sikkerhedskopi!"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Formatted\n"
+msgstr "Formateret\n"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Type of install"
+msgstr "Installationstype"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "Printer '%s' pć SMB/Windows server '%s'"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
+"- Daemon (%s) include:\n"
msgstr ""
"\n"
-"\n"
-"Dit kort bruger i űjeblikket %s\"%s\"-driveren (normal driver for dit kort "
-"er \"%s\")"
+"- Dæmon (%s) indeholder:\n"
-#: ../../harddrake/sound.pm:1
+#: ../../modules/parameters.pm:1
+#, c-format
+msgid "%d comma separated numbers"
+msgstr "%d kommaseparerede tal"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
msgstr ""
-"Her kan du vælge et alternativ drivprogram (enten OSS eller ALSA) for "
-"lydkortet (%s)"
+"rusers protokollen tillader brugere pć et netværk a identificere\n"
+"hvem der er logget pć andre maskiner"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Sound configuration"
-msgstr "Lyd-konfiguration"
+msgid "Automatic Steps Configuration"
+msgstr "Konfiguration af automatiske skridt"
-#: ../../harddrake/sound.pm:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
msgstr ""
-"Der findes intet kendt alternativt OSS/ALSA-drivprogram for lydkortet (%s) "
-"som i űjeblikket bruger '%s'"
+"Űnsker du at vide mere om Ćben Kildetekst-samfundet? Vær med i det frie "
+"programmels verden"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No alternative driver"
-msgstr "Intet alternativ drivprogram"
+msgid "Barbados"
+msgstr "Barbados"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "enable radio support"
-msgstr "aktivér radio-understűttelse"
+msgid "Please select data to backup..."
+msgstr "Vælg data for sikkerhedskopi..."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Radio support:"
-msgstr "Radio-understűttelse:"
+msgid ""
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
+msgstr ""
+"Tilslutning mislykkedes.\n"
+"Kontrollér konfigurationen i Mandrakes kontrolcentral."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "PLL setting:"
-msgstr "PLL-opsætning:"
+msgid "received"
+msgstr "modtaget"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr "Antal fangningsbuffere for mmap-fangning"
+msgid "/File/_New"
+msgstr "/Fil/_Ny"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Number of capture buffers:"
-msgstr "Antal fangningsbuffere:"
+msgid "The DNS Server IP"
+msgstr "DHCP-serverens IP-adresse"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Tuner type:"
-msgstr "Tuner-type:"
+msgid "IP Range End:"
+msgstr "Slut pć IP-omrćde:"
-#: ../../harddrake/v4l.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Card model:"
-msgstr "Kortmodel:"
+msgid "High"
+msgstr "Hűj"
-#: ../../harddrake/v4l.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
-"For de fleste moderne tv-kort vil bttv-modulet fra GNU/Linux-kernen blot "
-"automatisk finde de rette parametre.\n"
-"Hvis dit kort ikke findes korrekt, kan du gennemtvinge den rette tuner og "
-"korttyper her. Bare vælg dit tv-korts parametre om nűdvendigt"
+msgid "NoVideo"
+msgstr "Ingen video"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "this field describes the device"
+msgstr "Dette felt beskriver enheden"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Unknown|Generic"
-msgstr "Ukendt|generisk"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Tilfűjer printer til Star Office/OpenOffice.org/GIMP.org"
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "Ukendt|CPH06X (bt878) [mange leverandűrer]"
+msgid "Local Printers"
+msgstr "Lokale printere"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "Ukendt|CPH05X (bt878) [mange leverandűrer]"
+msgid "Installation image directory"
+msgstr "Katalog for installationsaftryk"
-#: ../../harddrake/v4l.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Auto-detect"
-msgstr "Automatisk detektion"
+msgid "NIS Server"
+msgstr "NIS-server"
-#: ../../interactive/newt.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Do"
-msgstr "Lav"
+msgid "Port: %s"
+msgstr "Vært: %s"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Dit valg? (standard %s) "
+msgid "Spain"
+msgstr "Spanien"
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Dćrligt valg, prűv igen\n"
+msgid "This user name has already been added"
+msgstr "Dette brugernavn eksisterer allerede"
-#: ../../interactive/stdio.pm:1
+#: ../../interactive.pm:1
#, c-format
-msgid "Re-submit"
-msgstr "Indsend igen"
+msgid "Choose a file"
+msgstr "Vælg en fil"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Bemærk, en etikette ændredes:\n"
-"%s"
+msgid "Apply"
+msgstr "Anvend"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Vælg det fűrste tal i 10-omrćdet som du űnsker at redigere,\n"
-"Eller tryk retur for at fortsætte.\n"
-"Dit valg? "
+msgid "Auto-detect available ports"
+msgstr "Auto-detektér tilgængelige porte"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Der er mange ting at vælge imellem (%s).\n"
+msgid "Internet Connection Sharing currently disabled"
+msgstr "Deling af internetforbindelse er slćet fra"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Dit valg? (standard '%s'%s) "
+msgid "San Marino"
+msgstr "San Marino"
-#: ../../interactive/stdio.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid " enter `void' for void entry"
-msgstr " indtast 'void' for tom indgang"
+msgid "Belgium"
+msgstr "Belgien"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to click on this button?"
-msgstr "Űnsker du at klikke pć denne knap?"
+msgid "Kuwait"
+msgstr "Kuwait"
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Button `%s': %s"
-msgstr "Knap '%s': %s"
+msgid "Choose the window manager to run:"
+msgstr "Vælg den vindueshćndtering du űnsker at benytte:"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "sub generation of the cpu"
+msgstr "Undergeneration af cpu'en"
+
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Dit valg? (0/1, standard '%s') "
+msgid "First Time Wizard"
+msgstr "Fűrstegangshjælper"
-#: ../../interactive/stdio.pm:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Entries you'll have to fill:\n"
-"%s"
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
msgstr ""
-"Indgange som du skal udfylde:\n"
-"%s"
+"Der opstod en fejl, men jeg ved ikke hvordan den kan hćndteres pć en\n"
+"pæn mćde.\n"
+"Fortsæt pć eget ansvar!"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Indlæsning af modul %s mislykkedes.\n"
-"Űnsker du at prűve igen med andre parametre?"
+msgid "please wait, parsing file: %s"
+msgstr "vent venligst, fortolker filen: %s"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Specify options"
-msgstr "Specificér parametre"
+msgid "Taiwan"
+msgstr "Taiwan"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Autoprobe"
-msgstr "Automatisk sondering"
+msgid "Pakistan"
+msgstr "Pakistan"
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
msgstr ""
-"I nogen tilfælde behűver %s driveren at have ekstra information for at "
-"virke\n"
-"ordentligt, selv om den normalt virker fint uden. Űnsker du at angive "
-"ekstra\n"
-"parametre for den eller tillade driveren at sondere din maskine for\n"
-"den information den behűver? Af og til vil sondering stoppe maskinen, men "
-"burde\n"
-"ikke forćrsage nogen skader."
+"For at kunne udskrive pć din Lexmark inkjet fra denne konfigurering skal du "
+"bruge inkjet printerdriverne leveret af Lexmark (http://www.lexmark.com/). "
+"Klik pć 'Drivers'-knappen. Vælg sć din model og derefter 'Linux' som "
+"operativsystem. Driverne kommer som RPM-pakker eller skal-skripter med "
+"interaktiv grafisk installation. Du behűver ikke lave denne konfiguration "
+"via de grafiske grænseflader. Annullér direkte efter licensaftalen. Udskriv "
+"derefter justeringssider for skrivehovedet med 'lexmarkmaintain', og justér "
+"opsætningen af justeringen af hovedet med dette program."
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Hvilken %s driver skal jeg prűve?"
+msgid "Permissions"
+msgstr "Rettigheder"
-#: ../../modules/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Module options:"
-msgstr "Modulindstillinger:"
+msgid "Provider name (ex provider.net)"
+msgstr "Navn pć udbyder (f.eks. udbyder.net)"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Du kan nu sætte parametre til modulet %s.\n"
-"Parametrene er i formatet ``navn=værdi navn2=værdi2 ...''.\n"
-"F.eks., ``io=0x300 irq=7''"
+msgid "Version: %s\n"
+msgstr "Version: %s\n"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
-"Du kan nu angive parametre til modul %s.\n"
-"Bemærk at alle adresser bűr indtastes med foranstillet 0x, fx '0x123'"
+"Dit system har kun fć resurser. Du kan fć problemer med at installere\n"
+"Mandrake Linux. Hvis dette sker, kan du prűve en tekst-baseret installation "
+"i stedet\n"
+"Dette gűres ved at trykke 'F1' ved opstart fra cdrommen, og sć skrive 'text'."
-#: ../../modules/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
+msgid "Use the Windows partition for loopback"
+msgstr "Brug Windows partitionen til Loopback"
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Installerer driver for %s kort %s"
+msgid "Armenian (typewriter)"
+msgstr "Armensk (skrivemaskine)"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "See hardware info"
-msgstr "Se info for maskinel"
+msgid "Connection type: "
+msgstr "Type af forbindelse"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Har du nogen %s grænsesnit?"
+msgid "Graphical interface"
+msgstr "Grafisk grænseflade"
-#: ../../modules/interactive.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Do you have another one?"
-msgstr "Har du én til?"
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s med 3D hardware acceleration"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Fandt %s %s grænsesnit"
+msgid "India"
+msgstr "Indien"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "Du kan konfigurere hver parameter for modulet her."
+msgid "Chad"
+msgstr "Tchad"
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "comma separated strings"
-msgstr "kommaseparerede strenge"
+msgid "Slovakia"
+msgstr "Slovakiet"
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "comma separated numbers"
-msgstr "kommaseparerede tal"
+msgid "Singapore"
+msgstr "Singapore"
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "%d comma separated strings"
-msgstr "%d kommaseparerede strenge"
+msgid "Cambodia"
+msgstr "Cambodja"
-#: ../../modules/parameters.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d kommaseparerede tal"
+msgid "Monitor HorizSync: %s\n"
+msgstr "Skærms vandrette frekvens: %s\n"
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "a number"
-msgstr "et tal"
+msgid "Path"
+msgstr "Sti"
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
msgstr ""
-"Du behűver alcatel mikrokoden.\n"
-"Hjemhent den fra\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"og kopiér filen mgmt.o i /usr/share/speedtouch"
+"Her kan du angive en vilkćrlig kommandolinje som jobbet skal kanaliseres ind "
+"i i stedet for at blive sendt direkte til en printer."
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
msgstr ""
-"Den mest almindelige mćde at forbinde med ADSL er pppoe.\n"
-"Nogen forbindelser bruger pptp, og nogle fć bruger DHCP.\n"
-"Hvis du ikke ved noget, vælg 'brug pppoe'"
+"Printsystemet (%s) vil ikke blive startet automatisk, nćr maskinen startes "
+"op.\n"
+"Det er muligt at den automatiske opstart blev slćet fra ved ændring til et "
+"hűjere sikkerhedsniveau, fordi printsystemet er et muligt angrebspunkt.\n"
+"\n"
+"Űnsker du at have den automatiske opstart af printsystemet slćet til igen?"
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Connect to the Internet"
-msgstr "Lav forbindelse til Internettet"
+msgid ""
+"Printer %s\n"
+"What do you want to modify on this printer?"
+msgstr ""
+"Printer %s\n"
+"Hvad űnsker du at forandre pć, pć denne printer?"
-#: ../../network/adsl.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Sagem (using pppoa) usb"
-msgstr "Sagem (der bruger pppoa) usb"
+msgid "Add host"
+msgstr "Tilfűj vært"
-#: ../../network/adsl.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
+msgid ""
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
+"\n"
+"The current driver for your \"%s\" sound card is \"%s\" "
+msgstr ""
+"Hvis du virkelig mener du véd hvilken driver der er den rette til dit kort "
+"kan du vælge én fra listen ovenfor.\n"
+"\n"
+"Den aktuelle driver for dit %s-lydkort er \"%s\" "
-#: ../../network/adsl.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "use dhcp"
-msgstr "brug dhcp"
+msgid ""
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
+"\n"
+"\"Custom\" permit a per-user granularity.\n"
+msgstr ""
+"Űnsker du at tillade brugere at eksportere nogle kataloger i deres "
+"hjemmekatalog?\n"
+"Tilladelse af dette vil sætte brugere i stand til simpelthen at klikke pć "
+"'Fildeling' i konqueror og nautilus.\n"
-#: ../../network/adsl.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "use pptp"
-msgstr "brug pptp"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
+msgstr ""
+"Vælg indlæs eller gem pakkevalg pć diskette.\n"
+"Formatet er det samme som for auto_install-genererede disketter."
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "use pppoe"
-msgstr "brug pppoe"
+msgid "China (broadcast)"
+msgstr "Kina (broadcast)"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Other ports"
-msgstr "Andre porte"
+msgid "Use quota for backup files."
+msgstr "Brug kvoter for sikkerhedskopieringsfiler"
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Everything (no firewall)"
-msgstr "Alt (ingen brandmur)"
+msgid "Configuring printer \"%s\"..."
+msgstr "Konfigurerer printer '%s'..."
-#: ../../network/drakfirewall.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
-msgstr ""
-"Ugyldig port angivet: %s.\n"
-"Det korrekte format er \"port/tcp\" eller \"port/udp\", \n"
-"hvor port er mellem 1 og 65535."
+msgid "Internet connection"
+msgstr "Internet opkobling"
-#: ../../network/drakfirewall.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
msgstr ""
-"Du kan angive diverse porte. \n"
-"Gyldige eksempler er: 139/tcp 139/udp.\n"
-"Se /etc/services for information."
+"Indlæsning af modul %s mislykkedes.\n"
+"Űnsker du at prűve igen med andre parametre?"
-#: ../../network/drakfirewall.pm:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr "Hvilke tjenester vil du tillade at Internettet kan koble op med?"
+msgid "Welcome to the Open Source world."
+msgstr "Velkommen til en verden med ćben kildetekst"
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-"konfigurering med drakfirewall\n"
-"\n"
-"Forsikr dig om at du har konfigureret din internetforbindelse med "
-"drakconnect fűr du gćr videre."
+msgid "Bosnia and Herzegovina"
+msgstr "Bosnien-Hercegovina"
-#: ../../network/drakfirewall.pm:1
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
msgstr ""
-"drakfirewall-konfigurator\n"
-"\n"
-"Dette konfigurerer en personlig brandmur for denne Mandrake Linux-maskine.\n"
-"For en stærk dedikeret brandmurs-lűsning se venligst den specialiserede "
-"MandrakeSecurity Firewall-distribution."
+"Du skal have et rigtigt filsystem (ext2/ext3, reiserfs, xfs eller jfs) til "
+"dette monteringspunkt\n"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "No network card"
-msgstr "Intet netkort"
+msgid "You must enter a host name or an IP address.\n"
+msgstr "Du skal indtaste et værtsnavn eller en IP-adresse.\n"
-#: ../../network/drakfirewall.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "POP and IMAP Server"
-msgstr "POP- og IMAP-server"
+msgid "Netherlands"
+msgstr "Holland"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "Sender filer..."
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Mail Server"
-msgstr "Postserver"
+msgid "Internal ISDN card"
+msgstr "Internt ISDN-kort"
-#: ../../network/drakfirewall.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Domain Name Server"
-msgstr "Server for domænenavne (DNS)"
+msgid ""
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
+msgstr ""
+"Der findes intet kendt alternativt OSS/ALSA-drivprogram for lydkortet (%s) "
+"som i űjeblikket bruger '%s'"
-#: ../../network/drakfirewall.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Web Server"
-msgstr "Webserver"
+msgid "Title"
+msgstr "Titel"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr "Zeroconf værtsnavn mć ikke indeholde et ."
+msgid "Install & convert Fonts"
+msgstr "Installér og konvertér skrifttyper"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Host name"
-msgstr "Værtsnavn"
+msgid "WARNING"
+msgstr "ADVARSEL"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Zeroconf Host name"
-msgstr "Zeroconf-værtsnavn"
+msgid "Installing bootloader"
+msgstr "Installerer systemopstarter"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
-msgstr ""
-"\n"
-"\n"
-"Indtast et Zeroconf-værtsnavn uden noget punktum hvis du ikke űnsker at "
-"bruge det forvalgte værtsnavn."
+msgid "replay"
+msgstr "afspil igen"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Configuring network"
-msgstr "Konfigurerer netværk"
+msgid "detected %s"
+msgstr "Detekteret %s"
-#: ../../network/ethernet.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
-msgstr ""
-"Vælg hvilken netværksadapter du űnsker at bruge til at lave forbindelse til "
-"Internettet med."
+msgid "Virgin Islands (U.S.)"
+msgstr "Jomfruűerne (USA)"
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Choose the network interface"
-msgstr "Vælg netværksgrænsesnit"
+msgid "Bad backup file"
+msgstr "Fejl i sikkerhedskopien"
-#: ../../network/ethernet.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"Der blev ikke fundet nogen ethernet netværksadapter pć dit system.\n"
-"Kan ikke sætte denne forbindelsetype op."
+"Indstilling af deling af internetforbindelse er allerede gjort.\n"
+"Den er de-aktiveret for nærværende\n"
+"Hvad űnsker du at gűre?"
-#: ../../network/ethernet.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
+msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""
-"Hvilken DHCP klient űnsker du at bruge?\n"
-"Standard er dhcp-client"
+"Indtast IP-adresse og port pć værten, hvis printere du űnsker at bruge."
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Ingen ISDN PCI-kort fundet. Vælg ét i næste skærmbillede."
+msgid "Pipe into command"
+msgstr "kanalisér ind i kommando"
-#: ../../network/isdn.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
msgstr ""
-"Jeg har opdaget et ISDN PCI-kort, men jeg ved ikke hvilken type. Vælg et PCI-"
-"kort i næste skærmbillede."
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Hvilket af de fűlgende er dit ISDN-kort?"
+"Noget maskinel pć din maskine skal bruge ''proprietære'' drivere for at "
+"virke.\n"
+"Du kan finde information om dem hos: %s"
-#: ../../network/isdn.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "ISDN Configuration"
-msgstr "ISDN konfiguration"
+msgid "Detecting devices..."
+msgstr "Detekterer enheder..."
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Abort"
-msgstr "Afbryd"
+msgid "Click here to launch the wizard ->"
+msgstr "Klik her for at starte vejlederen ->"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Continue"
-msgstr "Fortsæt"
+msgid "Haiti"
+msgstr "Haiti"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
+"Description of the fields:\n"
"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
msgstr ""
+"Beskrivelse af felterne:\n"
"\n"
-"Hvis du har et ISA kort burde værdiene i næste billede være rigtige.\n"
-"\n"
-"Hvis du har et PCMCIA kort skal du vide irq og io for kortet.\n"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "I don't know"
-msgstr "Det ved jeg ikke"
-
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "PCI"
-msgstr "PCI"
+msgid "the name of the CPU"
+msgstr "navnet pć CPU'en"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "Refreshing printer data..."
+msgstr "Opfrisker printerdata ..."
-#: ../../network/isdn.pm:1
+#: ../../install2.pm:1
#, c-format
-msgid "What kind of card do you have?"
-msgstr "Hvad slags kort har du?"
+msgid "You must also format %s"
+msgstr "Du skal ogsć formatere %s"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr "Fandt \"%s\" grænsesnit, űnsker du at bruge det?"
+msgid "Be careful: this operation is dangerous."
+msgstr "Vær forsigtig: denne operation er farlig."
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Hvilken protokol űnsker du at bruge?"
+msgid "Insert a floppy containing package selection"
+msgstr "Indsæt en diskette med pakkevalget"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Protokol for resten af verden"
+msgid "Server: "
+msgstr "Server: "
-#: ../../network/isdn.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-"Protokol for resten af verden \n"
-" ingen D-kanal (lejet linje)"
+msgid "Security Alerts:"
+msgstr "Sikkerhedspćmindelser:"
-#: ../../network/isdn.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "European protocol"
-msgstr "Europæisk protokol"
+msgid "Sweden"
+msgstr "Sverige"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Protokol for Europa (EDSS1)"
+msgid "Use Expect for SSH"
+msgstr "Brug Expect for SSH"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
-msgstr ""
-"Vælg din udbyder.\n"
-" Hvis de ikke er i listen, vælg Ikke listet"
+msgid "Poland"
+msgstr "Polen"
-#: ../../network/isdn.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "External ISDN modem"
-msgstr "Eksternt ISDN modem"
+msgid "Importance: %s\n"
+msgstr "Vigtighed: %s\n"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Internal ISDN card"
-msgstr "Internt ISDN-kort"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr "Markér om du vil udskyde dit bćnd fűr sikkerhedskopi laves"
-#: ../../network/isdn.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "Hvad slags type er din ISDN-forbindelse?"
+msgid "Other ports"
+msgstr "Andre porte"
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Network Configuration Wizard"
-msgstr "Konfigurér netværk"
+msgid "number of capture buffers for mmap'ed capture"
+msgstr "Antal fangningsbuffere for mmap-fangning"
-#: ../../network/isdn.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "Gammel konfiguration (isdn4net)"
+msgid "SMBus controllers"
+msgstr "SMBus-kontrollers"
-#: ../../network/isdn.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "New configuration (isdn-light)"
-msgstr "Ny konfiguration (isdn-light)"
+msgid "Connection timeout (in sec)"
+msgstr "Opkoblingens tidsudlűb (i sekunder)"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
msgstr ""
-"Hvilken ISDN-konfigurering foretrækker du?\n"
-"\n"
-"* Den gamle konfiguration bruger isdn4net. Det har stærke\n"
-" værktűjer, men det er vanskeligt at konfigurere for en nybegynder,\n"
-" og er ikke standardbaseret.\n"
-"\n"
-"' Det nye konfigurationsværktűj er enklere at forstć,\n"
-" mere standardiseret, men med færre værktűjer.\n"
-"\n"
-"Vi anbefaler den nye konfiguration.\n"
-"\n"
+"Nogen af de tidlige i486DX-100-chip kan ikke altid returnere til kűrende "
+"tilstand efter 'halt'-instruktionen er brugt"
-#: ../../network/modem.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do nothing"
-msgstr "Gűr ingenting"
+msgid "Croatian"
+msgstr "Kroatisk"
-#: ../../network/modem.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Install rpm"
-msgstr "Installér rpm"
+msgid "Use existing partition"
+msgstr "Brug eksisterende partition"
-#: ../../network/modem.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
-msgstr ""
-"\"%s\" baseret winmodem opdaget, űnsker du at installere krævet programmel?"
+msgid "Unable to contact mirror %s"
+msgstr "Kan ikke kontakte spejl: %s"
-#: ../../network/modem.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Title"
-msgstr "Titel"
+msgid "/Help/_About..."
+msgstr "/Hjælp/_Om..."
-#: ../../network/modem.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
-msgstr ""
-"Dit modem ier ikke understűttet af systemet.\n"
-"Tag og kig pć http://www.linmodems.org"
+msgid "Remove user directories before restore."
+msgstr "Fjern brugerkataloger fűr genskabning."
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Anden DNS-server (valgfri)"
+msgid ""
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
+msgstr ""
+"Du er ved at konfigurere en ekstern printer. Dette kræver en virkende "
+"netværksadgang, men dit netværk er endnu ikke konfigureret. Hvis du vil "
+"fortsætte uden en netværkskonfiguration, vil du ikke kunne bruge printeren "
+"som du konfigurerer nu. Hvordan űnsker du at fortsætte?"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Fűrste DNS-server (valgfri)"
+msgid "CUPS printer configuration"
+msgstr "Konfiguration af CUPS-printere"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Domain name"
-msgstr "Domænenavn"
+msgid "could not find any font in your mounted partitions"
+msgstr "Kunne ikke finde nogen skrifttyper i dine monterede partitioner"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "CHAP"
-msgstr "CHAP"
+msgid "F00f bug"
+msgstr "F00f-fejl"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Script-based"
-msgstr "Skript-baseret"
+msgid "XFree %s"
+msgstr "XFree %s"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Terminal-based"
-msgstr "Terminal-baseret"
+msgid ""
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
+msgstr ""
+"Hvilken DHCP klient űnsker du at bruge?\n"
+"Standard er dhcp-client"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid "Domain Name:"
+msgstr "Domænenavn:"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "Login ID"
-msgstr "Brugernavn"
+msgid "On Floppy"
+msgstr "Pć diskette"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Phone number"
-msgstr "Telefonnummer"
+msgid "Restore"
+msgstr "Genskab"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Connection name"
-msgstr "Navn pć forbindelsen"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
+msgstr ""
+"hvis sat til ja, sć tjek om netværksgrænsesnittene er fuldstændigt ćbne."
-#: ../../network/modem.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Dialup options"
-msgstr "Opkaldsindstillinger"
+msgid "Looking for available packages..."
+msgstr "Leder efter tilgængelige pakker"
-#: ../../network/modem.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Angiv hvilken seriel port dit modem er forbundet til."
+msgid "Init Message"
+msgstr "Init-besked"
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Network Configuration"
-msgstr "Konfigurér netværk"
+msgid "Rescue partition table"
+msgstr "Redder partitionstabel"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
-msgstr ""
-"Problemer indtraf under konfigurationen.\n"
-"Afprűv din forbindelse med net_monitor eller mcc. Hvis din forbindelse ikke "
-"virker, kan du prűve at genstarte konfigurationen."
+msgid "Connection complete."
+msgstr "Opkobling fuldfűrt."
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Derefter anbefaler vi at du genstarter dit X-miljű for\n"
-"at undgć problemer med det ændrede værtsnavn"
+msgid "Cyprus"
+msgstr "Cypern"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Tillykke, netværks- og internetkonfigurationen er færdig.\n"
-"Konfigurationen vil nu blive anvendt pć dit system.\n"
-"\n"
+msgid "Remove from RAID"
+msgstr "Fjern fra RAID"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
+msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr ""
-"Et problem opstod ved genstart af netværket: \n"
-"\n"
-"%s"
+"Denne krypteringsnűgle er for nem at gætte (skal mindst være pć %d tegn)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr "Netværket skal være genstartet. Űnsker du at genstarte det?"
+msgid "Configuration Wizards"
+msgstr "Vejledere til konfiguration"
#: ../../network/netconnect.pm:1
#, c-format
-msgid "Network configuration"
-msgstr "Netværks konfiguration"
+msgid "ISDN connection"
+msgstr "ISDN-forbindelse"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Űnsker du at starte din forbindelse ved opstart?"
+msgid "primary"
+msgstr "primær"
-#: ../../network/netconnect.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Internet connection"
-msgstr "Internet opkobling"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr " pć Windows-server \"%s\", deling \"%s\""
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
+"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
"\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
msgstr ""
-"Du har konfigureret flere mćder at koble dig mod internet pć.\n"
-"Venligst vælg den du űnsker at bruger.\n"
+"Denne dialog bruges til at vælge hvilke tjenester du űnsker skal startes ved "
+"opstart af maskinen.\n"
+"\n"
+"DrakX vil præsentere alle de tjenester, som er med i den aktuelle "
+"installation. Gennemse hver enkelt omhyggeligt og vælg dem fra som ikke er "
+"nűdvendige pć opstartstidspunktet.\n"
"\n"
+"En kort forklarende tekst om en tjeneste bliver vist nćr den vælges. Hvis du "
+"ikke er sikker pć om en tjeneste er nyttig eller ej, er det dog sikrere at "
+"bruge den foreslćede opfűrsel.\n"
+"\n"
+"Vær specielt varsom pć dette trin hvis du planlægger at bruge maskinen som "
+"server: du vil formentlig űnske ikke at starte nogensomhelst tjeneste op som "
+"du ikke har brug for. Husk at adskillige tjenester kan være farlige hvis de "
+"er aktiveret pć en server. Vælg som hovedregel kun de tjenester som du "
+"virkelig behűver."
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Vælg den opkobling, du űnsker at konfigurere"
+msgid "Skip"
+msgstr "Spring over"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "ethernet card(s) detected"
-msgstr "ethernet-kort detekteret"
+msgid "Niue"
+msgstr "Niue"
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "LAN connection"
-msgstr "Lokalnet-konfiguration"
+msgid ""
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
+msgstr ""
+"Aktiverer/deaktiverer alle netværks-kort som er konfigureret\n"
+"til at starte ved opstart"
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "cable connection detected"
-msgstr "Kabelopkobling detekteret"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid ""
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
+msgstr ""
+"CPU-frekvensen i MHz (Megahertz, hvilket som en fűrste tilnærmelse kan groft "
+"regnes som antal instruktioner cpu'en kan udfűre per sekund)"
-#: ../../network/netconnect.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Cable connection"
-msgstr "Kabelforbindelse"
+msgid "important"
+msgstr "vigtigt"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "detected"
-msgstr "Detekteret"
+msgid "Total Progress"
+msgstr "Total fremdrift"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "ADSL connection"
-msgstr "ADSL opkobling"
+msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
+"\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
+"\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
+"\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
+msgstr ""
+"DrakX vil fűrst finde alle IDE-enheder der er tilstede pć din maskine. Den "
+"vil ogsć lede efter en eller flere PCI SCSI-kort pć dit system. Hvis et SCSI-"
+"kort findes, vil DrakX automatisk installere en driver til det.\n"
+"\n"
+"Da maskineleftersűgningen ikke er idiotsikker, kan DrakX fejle i at finde "
+"dine diskdrev. I sć fald mć du angive dit maskinel manuelt.\n"
+"\n"
+"Hvis du mćtte angive dit PCI SCSI-kort manuelt, vil DrakX spűrge om du vil "
+"specificere nogle indstillingsmuligheder for den. Du bűr lade DrakX spűrge "
+"udstyret om opsætning af kortspecifikke indstillinger, som er nűdvendige for "
+"at initialisere kortet. De fleste gange vil DrakX finde ud af dette uden "
+"problemer.\n"
+"\n"
+"Hvis DrakX ikke kan fć oplysninger om indstillinger ud af udstyret, som skal "
+"bruges til opsætningen, skal du angive opsætningsinformation til driveren. "
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "detected %s"
-msgstr "Detekteret %s"
+msgid "Users"
+msgstr "Brugere"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "ISDN connection"
-msgstr "ISDN-forbindelse"
+msgid "Aruba"
+msgstr "Aruba"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Winmodem connection"
-msgstr "Winmodem-forbindelse"
+msgid "Preparing bootloader..."
+msgstr "Forbereder opstarter..."
-#: ../../network/netconnect.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "detected on port %s"
-msgstr "Detekteret pć port %s"
+msgid "Gateway (e.g. %s)"
+msgstr "Gateway (fx %s)"
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Normal modem connection"
-msgstr "Normal modemforbindelse"
+msgid "The passwords do not match"
+msgstr "Adgangskoderne stemmer ikke overens"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detecting devices..."
-msgstr "Detekterer enheder..."
+msgid "Examples for correct IPs:\n"
+msgstr "Eksempler pć korrekte IP'er:\n"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Expert Mode"
-msgstr "Eksperttilstand"
+msgid "Frequency (MHz)"
+msgstr "Frekvens (MHz)"
-#: ../../network/netconnect.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Use auto detection"
-msgstr "Brug automatisk detektion"
+msgid ""
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
+msgstr ""
+"For at bruge dette gemte pakkevalg, start installationen op med``linux "
+"defcfg=floppy''"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Choose the profile to configure"
-msgstr "Vælg profilen der skal konfigureres"
+msgid "the number of the processor"
+msgstr "nummeret pć processoren"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Velkommen til Netværkskonfigurations-vejlederen\n"
-"\n"
-"Vi skal til at konfigurere din internet- eller netværksforbindelse.\n"
-"Hvis du ikke űnsker at bruge autodetektering, sć fravælg afkrydsningsboksen\n"
+msgid "Hardware clock set to GMT"
+msgstr "Maskin-ur sat til GMT"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Da du er i gang med en netværksinstallation er dit netværk allerede "
-"konfigureret.\n"
-"Klik OK for at beholde din konfiguration, eller annullér for at "
-"omkonfigurere din Internet- og netværksforbindelse.\n"
+msgid "Give a file name"
+msgstr "Giv et filnavn"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Vi skal nu konfigurere opkoblingen '%s'.\n"
-"\n"
-"\n"
-"Tryk OK for at begynde."
+msgid "Please choose the port that your printer is connected to."
+msgstr "Angiv hvilken port din printer er forbundet til."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Vi skal nu konfigurere opkoblingen '%s'."
+msgid "Change Cd-Rom"
+msgstr "Skift cdrom"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet connection & configuration"
-msgstr "Internetforbindelse & -konfiguration"
+msgid "Paraguay"
+msgstr "Paraguay"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
+msgstr "Brug inkrementalbackup (overskriv ikke gamle sikkerhedskopier)"
+
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Configure the connection"
-msgstr "Konfigurér forbindelsen"
+msgid "There's no known driver for your sound card (%s)"
+msgstr "Der findes intet kendt drivprogram for lydkortet (%s)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Disconnect"
-msgstr "Afbryd"
+msgid "force"
+msgstr "tving"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Connect"
-msgstr "Tilslut"
+msgid "Exit"
+msgstr "Afslut"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\n"
-"You can reconfigure your connection."
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
msgstr ""
-"\n"
-"Du kan genkonfigurere din forbindelse"
+"Bemærk: Afhængig af printermodel og udskriftssystem vil op til %d MB "
+"yderligere programmel blive installeret."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
msgstr ""
-"\n"
-"Du kan lave forbindelse til Internettet eller omkonfigurere din forbindelse."
+"Du har ingen konfigurerede grænsesnit.\n"
+"Konfigurér disse fűrst ved at klikke pć 'Konfigurér'"
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "Du er ikke forbundet til Internettet nu."
+msgid "Estonian"
+msgstr "Estisk"
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Du kan lukke forbindelsen til Internettet eller genkonfigurere din "
-"forbindelse."
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
+msgstr "Apache er en webserver. Den bruges til at betjene HTML-filer og CGI."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "You are currently connected to the Internet."
-msgstr "Du har forbindelse til Internettet nu."
+msgid "Add/Del Clients"
+msgstr "Tilfűj/slet klienter"
-#: ../../network/network.pm:1
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "Url burde begynde med 'ftp:' eller 'http:'"
+msgid "Choose the network interface"
+msgstr "Vælg netværksgrænsesnit"
-#: ../../network/network.pm:1
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Proxy should be http://..."
-msgstr "Proxy skal være http://..."
+msgid "Unknown Model"
+msgstr "Ukendt model"
-#: ../../network/network.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "FTP proxy"
-msgstr "FTP-proxy"
+msgid "CD/DVD burners"
+msgstr "CD/DVD-brændere"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "HTTP proxy"
-msgstr "HTTP-proxy"
+msgid ""
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"Partition som opstartes som standard\n"
+" (gælder kun MS-DOS-opstart, ikke LILO)\n"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Proxies configuration"
-msgstr "Konfiguration af mellemvært (proxy)"
+msgid "choose image"
+msgstr "vælg billede"
-#: ../../network/network.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "Gateway-adresse skal have formatet 1.2.3.4"
+msgid "Firewalling configuration detected!"
+msgstr "Brandmurkonfiguration fundet!"
-#: ../../network/network.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "Adresse pć DNS-server skal have formatet 1.2.3.4"
+msgid "Connection name"
+msgstr "Navn pć forbindelsen"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Gateway device"
-msgstr "Gateway enhed"
+msgid ""
+"x coordinate of text box\n"
+"in number of characters"
+msgstr "antal tegn i tekstrudens x-led"
-#: ../../network/network.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (fx %s)"
+msgid "Updating package selection"
+msgstr "Opdaterer pakkevalg"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DNS server"
-msgstr "DNS-server"
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "Hvor űnsker du at montere loopback-filen %s?"
-#: ../../network/network.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
msgstr ""
-"Indtast domænenavn, værtsnavn og IP adressen for evt. ekstra navne-servere.\n"
-"Dit værtsnavn skal være et fuldt kvalificeret værtsnavn inklusive domæne,\n"
-"f.eks. minpc.mitfirma.dk. Hvis du ikke har nogen ekstra navne-servere,\n"
-"sć lad navne-server-felterne være blanke."
+"Disketten er blevet genereret.\n"
+"Du kan nu gennemfűre installationen igen."
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
-"Hastighed bűr have endelsen k, M or G (for eksempel, \"11M\" for 11M), eller "
-"tilfűj nok '0'."
+msgid "the number of buttons the mouse has"
+msgstr "antal knapper som musen har"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
msgstr ""
-"Frek bűr have endelsen k, M or G (for eksempel, \"2.46G\" for 2.46 GHz "
-"frekvens), eller tilfűj nok '0'."
-
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresse bűr have formatet 1.2.3.4"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Start at boot"
-msgstr "Start ved opstart"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Tildel værtsnavn fra DHCP-adresse"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Network Hotplugging"
-msgstr "Hotplugging af netværk"
+"Indtast kataloget (eller modulet) hvori\n"
+" sikkerhedskopien skal lægges pć denne maskine."
-#: ../../network/network.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "Fűlg id for netværkskort (nyttigt for bærbare)"
+msgid "Replay"
+msgstr "Afspil igen"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "DHCP host name"
-msgstr "DHCP-værtsnavn"
+msgid "Backup other files"
+msgstr "Lav sikkerhedskopi af andre filer"
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Netmask"
-msgstr "Netmaske"
+msgid "No floppy drive available"
+msgstr "Intet tilgængeligt diskettedrev"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "IP address"
-msgstr "IP-adresse"
+msgid "Backup files are corrupted"
+msgstr "Sikkerhedskopifiler er űdelagte"
-#: ../../network/network.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp/zeroconf)"
+msgid "TV norm:"
+msgstr "Tv-standard:"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Automatic IP"
-msgstr "Automatisk IP"
+msgid "Cpuid family"
+msgstr "Cpuid-familie"
-#: ../../network/network.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid " (driver %s)"
-msgstr " (drivprogram %s)"
+msgid "32 MB"
+msgstr "32 Mb"
-#: ../../network/network.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfigurerer netværksenheden %s"
+msgid "Lithuanian AZERTY (new)"
+msgstr "Litauisk AZERTY (ny)"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
msgstr ""
-"Indtast IP konfigurationen for denne maskine. Hvert felt skal udfyldes\n"
-"med en IP adresse i `dotted-decimal' notation (for eksempel 1.2.3.4)."
+"ja betyder at den aritmetiske koprocessor har tilknyttet en undtagelsesvektor"
-#: ../../network/network.pm:1
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
msgstr ""
-"ADVARSEL: Denne enhed er tidligere blevet konfigureret til at lave "
-"forbindelse til Internettet.\n"
-"Ved kun at trykke pć OK beholder du den nuværende konfiguration.\n"
-"Ændringer i felterne nedenunder vil overskrive denne konfiguration."
+"Du har valgt en programmeret RAID-partition som rod (/).\n"
+"Ingen systemopstarter kan hćndtere dette uden en /boot partition.\n"
+"Vær sikker pć at tilfűje en /boot partition"
-#: ../../network/shorewall.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
-msgstr ""
-"Advarsel! En eksisterende brandmurkonfiguration er blevet fundet. Du skal "
-"muligvis lave manuelle rettelser efter installationen."
+msgid "Previous"
+msgstr "Forrige"
-#: ../../network/shorewall.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Brandmurkonfiguration fundet!"
+msgid "Other OS (MacOS...)"
+msgstr "Andet styresystem (MacOS...)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Account Password"
-msgstr "Adgangskode for konto"
+msgid "To activate the mouse,"
+msgstr "For at aktivere musen,"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Account Login (user name)"
-msgstr "Konto-login (brugernavn)"
+msgid "Bringing up the network"
+msgstr "Bringer netværket op"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../common.pm:1
#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Opkoblingens tidsudlűb (i sekunder)"
+msgid "Screenshots will be available after install in %s"
+msgstr "Űjebliksbilleder vil være tilgængelige efter installation i %s"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "Connection speed"
-msgstr "Opkoblingshastighed"
+msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
+msgstr ""
+"Mere end én Microsoft Windows partition er blevet genkendt pć dit diskdrev. "
+"Vælg den som du űnsker at ændre stűrrelse pć for at kunne installere dit nye "
+"Mandrake Linux operativsystem.\n"
+"\n"
+"Hver partition er listet som fűlger: 'Linux navn', 'Windows navn', "
+"'Kapacitet'.\n"
+"\n"
+"'Linux navn' er kodet som fűlger: 'drevtype', 'drevnummer', "
+"'partitionsnummer' (for eksempel '/hda1').\n"
+"\n"
+"'drevtype' er 'hd' hvis dit diskdrev er et IDE drev, og 'sd' hvis det er et "
+"SCSI drev.\n"
+"\n"
+"'drevnummer' er altid et bogstav efter 'hd' eller 'sd'. For IDE drev:\n"
+"\n"
+" * 'a' betyder 'hoved-drev pć den primære IDE controller',\n"
+"\n"
+" * 'b' betyder 'slave-drev pć den primære IDE controller',\n"
+"\n"
+" * 'c' betyder 'hoved-drev pć den sækundære IDE controller',\n"
+"\n"
+" * 'd' betyder 'slave-drev pć den sækundære IDE controller'.\n"
+"\n"
+"For SCSI drev betyder 'a' det 'fűrste drev', 'b' betyder det 'andet drev', "
+"osv.\n"
+"\n"
+"'Windows navn' er det bogstav som dit drev har under Windows (den fűrste\n"
+"disk eller partition kaldes 'C:')."
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Dialing mode"
-msgstr "Opringningsmćde"
+msgid "Tanzania"
+msgstr "Tanzania"
-#: ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Choose your country"
-msgstr "Vælg dit land"
+msgid "Computing FAT filesystem bounds"
+msgstr "Udregner FAT-filsystemets grænser"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "Udbyder DNS 2 (valgfri)"
+msgid ""
+"\n"
+"Backup Sources: \n"
+msgstr ""
+"\n"
+"Kilder for sikkerhedskopi: \n"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "Udbyder DNS 1 (valgfri)"
+msgid "Content of the file"
+msgstr "Indhold af filen"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Provider phone number"
-msgstr "Udbyders telefonnummer"
+msgid "Authentication LDAP"
+msgstr "Autentificering LDAP"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Navn pć udbyder (f.eks. udbyder.net)"
+msgid "Let me pick any driver"
+msgstr "Lad mig vælge hvilkensomhelst driver"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Your personal phone number"
-msgstr "Dit personlige telefonnummer"
+msgid "Profile "
+msgstr "Profil "
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Card IO_1"
-msgstr "Kort IO_1"
+msgid "transmitted"
+msgstr "transmitteret"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Card IO_0"
-msgstr "Kort IO_0"
+msgid "Palestine"
+msgstr "Palæstina"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Card IO"
-msgstr "Kort IO"
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Card mem (DMA)"
-msgstr "Kort mem (DMA)"
+msgid "%d comma separated strings"
+msgstr "%d kommaseparerede strenge"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Card IRQ"
-msgstr "Kort IRQ"
+msgid "Here is the full list of keyboards available"
+msgstr "Her er den komplette liste over tilgængelige tastaturer"
-#: ../../network/tools.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Please fill or check the field below"
-msgstr "Udfyld eller markér feltet nedenunder"
+msgid "Theme name"
+msgstr "Tema-navn"
-#: ../../network/tools.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Connection Configuration"
-msgstr "Forbindelses-konfiguration"
+msgid "/_Help"
+msgstr "/_Hjælp"
-#: ../../network/tools.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
msgstr ""
-"Det lader ikke til at dit system har forbindelse til Internettet.\n"
-"Prűv at omkonfigurere din forbindelse."
+"Hær kan du vælge om skannere koblede til denne maskine skal gűres "
+"tilgængelige for eksterne maskiner og i sć fald pć hvilke eksterne maskiner."
-#: ../../network/tools.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Af sikkerhedsgrunde vil det blive afbrudt nu."
+msgid "the width of the progress bar"
+msgstr "bredden pć forlűbslinjen"
-#: ../../network/tools.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Systemet er nu forbundet til Internettet."
+msgid "Cook Islands"
+msgstr "Cooks űer"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../fs.pm:1
#, c-format
-msgid "Testing your connection..."
-msgstr "Tester din forbindelse..."
+msgid "Formatting partition %s"
+msgstr "Formaterer partition %s"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Űnsker du at forsűge at skabe forbindelse til Internettet nu?"
+msgid "Hostname required"
+msgstr "Værtsnavn krævet"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Internet configuration"
-msgstr "Internet-konfiguration"
+msgid "Unselect fonts installed"
+msgstr "Fravælg installerede skrifttyper"
-#: ../../partition_table/raw.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
-msgstr ""
-"Noget slemt sker pć dit drev. \n"
-"En test for at tjekke integriteten af data er mislykkedes. \n"
-"Dette betyder at alt pć disken vil ende som tilfældige beskadigede data."
+msgid "Cancel"
+msgstr "Annullér"
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid " (Default)"
-msgstr " (Forvalgt)"
+msgid "Searching for configured scanners ..."
+msgstr "Sűger efter konfigurerede skannere ..."
-#: ../../printer/cups.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Pć CUPS-server '%s'"
+msgid "Wheel"
+msgstr "Hjul"
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Remote Printers"
-msgstr "Eksterne printere"
+msgid "Videocard"
+msgstr "Videokort"
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "CUPS"
-msgstr "CUPS"
+msgid "\tBackups use tar and bzip2\n"
+msgstr "\tSikkerhedskopiering bruger tar og bzip2\n"
-#: ../../printer/cups.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "(on this machine)"
-msgstr "(pć denne maskine)"
+msgid "Remove Selected"
+msgstr "Fjern valgte"
-#: ../../printer/cups.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "(on %s)"
-msgstr "(pć %s)"
+msgid "/Autodetect _modems"
+msgstr "/Auto-detektér modemmer"
-#: ../../printer/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
+msgid "Remove printer"
+msgstr "Fjern printer"
-#: ../../printer/data.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "LPRng"
-msgstr "LPRng"
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
+msgstr ""
+"ADVARSEL!\n"
+"\n"
+"DrakX vil nu ændre stűrrelsen pć din Windows-partition. Udvis forsigtighed: "
+"denne operation er farlig. Hvis du ikke allerede har gjort det, bűr du fűrst "
+"gć ud af denne installation, kűre scandisk under Windows (og eventuelt "
+"defrag) og sć genstarte installationen. Du bűr ogsć tage en sikkerhedskopi "
+"af dine data. Tryk pć Ok, hvis du er helt sikker."
-#: ../../printer/data.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
+msgid "Which services would you like to allow the Internet to connect to?"
+msgstr "Hvilke tjenester vil du tillade at Internettet kan koble op med?"
-#: ../../printer/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "LPD"
-msgstr "LPD"
+msgid ""
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
+msgstr ""
+"Velkommen til programmet for postkonfigurering.\n"
+"\n"
+"Her vil du kunne opsætte pćmindelsessystemet\n"
-#: ../../printer/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Dæmon"
+msgid "Other"
+msgstr "Andet"
-#: ../../printer/data.pm:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
-msgid "PDQ"
-msgstr "PDQ"
+msgid "Default"
+msgstr "Forvalgt"
-#: ../../printer/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
+msgid "Button 2 Emulation"
+msgstr "Emulering af knap 2"
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Unknown Model"
-msgstr "Ukendt model"
+msgid "type1inst building"
+msgstr "opbyg type1inst"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Unknown model"
-msgstr "Ukendt model"
+msgid "Abiword"
+msgstr "Abiword"
-#: ../../printer/main.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "%s (Port %s)"
-msgstr "%s (port %s)"
+msgid "choose image file"
+msgstr "vælg billedfil"
-#: ../../printer/main.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Host %s"
-msgstr "Vært %s"
+msgid "X server"
+msgstr "X-server"
-#: ../../printer/main.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Network %s"
-msgstr "Netværk %s"
+msgid "Domain Admin User Name"
+msgstr "Brugernavn for domæneadministrator"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Interface \"%s\""
-msgstr "Grænseflade '%s'"
+msgid "There was an error while scanning for TV channels"
+msgstr "Der opstod en fejl ved skanningen efter tv-kanaler"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Local network(s)"
-msgstr "Lokalnetværk"
+msgid "US keyboard (international)"
+msgstr "Amerikansk (internaltionalt)"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Raw printer (No driver)"
-msgstr "Rć printer (ingen driver)"
+msgid "Not installed"
+msgstr "Ikke installeret"
-#: ../../printer/main.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ", using command %s"
-msgstr ", med kommando %s"
+msgid "LAN connection"
+msgstr "Lokalnet-konfiguration"
-#: ../../printer/main.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr " pć Novell-server \"%s\", printer \"%s\""
+msgid "/File/-"
+msgstr "/Fil/-"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr " pć Windows-server \"%s\", deling \"%s\""
+msgid "Italian"
+msgstr "Italiensk"
-#: ../../printer/main.pm:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP vært \"%s\", port %s"
+msgid "Basic"
+msgstr "Basal"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr " pć LPD-server \"%s\", printer \"%s\""
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
+msgstr ""
+"\n"
+"Ophavsret © 2002 MandrakeSoft\n"
+"Stew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ", printing to %s"
-msgstr ", skriver til %s"
+msgid "Honduras"
+msgstr "Honduras"
-#: ../../printer/main.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ", multi-function device"
-msgstr ", multi-funktions-enhed"
+msgid "pdq"
+msgstr "pdq"
-#: ../../printer/main.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", multi-funktions-enhed pć HP JetDirect"
+msgid "Card IO"
+msgstr "Kort IO"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ", multi-function device on USB"
-msgstr ", multi-funktions-enhed pć USB"
+msgid "when checked, owner and group won't be changed"
+msgstr "ved kontrol vil ejer og gruppe ikke blive ændret"
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", multi-function device on parallel port \\#%s"
-msgstr ", multi-funktions-enhed pć parallel port \\#%s"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
+msgstr ""
+"\n"
+"Denne specielle Bootstrap-\n"
+"partition er for at\n"
+"dual-boote dit system.\n"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ", USB printer"
-msgstr ", USB printer"
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
+msgstr ""
+"Vælg for hvert skridt om det skal være som under installationen, eller "
+"manuelt"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ", USB printer \\#%s"
-msgstr ", USB printer \\#%s"
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
+msgstr ""
+"Du kan ogsć her bestemme om skannere pć eksterne maskiner skal gűres "
+"tilgængelige pć denne maskine"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid " on parallel port \\#%s"
-msgstr " pć parallelport \\#%s"
+msgid "\t-Network by FTP.\n"
+msgstr "\t-Netværk via FTP.\n"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Local Printers"
-msgstr "Lokale printere"
+msgid "Russian (Yawerty)"
+msgstr "Russisk (Yawerty)"
-#: ../../printer/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pipe job into a command"
-msgstr "kanalisér opgave ind i kommando"
+msgid "You must enter a device or file name!"
+msgstr "Du skal indtaste en enhed eller et filnavn!"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Enter a printer device URI"
-msgstr "Indtast en printerenheds-URI"
+msgid "/_Quit"
+msgstr "/_Afslut"
-#: ../../printer/main.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Printer on NetWare server"
-msgstr "Printer pć en NetWare server"
+msgid ""
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
+msgstr ""
+"Du behűver alcatel mikrokoden.\n"
+"Hjemhent den fra\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"og kopiér filen mgmt.o i /usr/share/speedtouch"
-#: ../../printer/main.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Printer pć SMB/Windows 95/98/NT server"
+msgid "Graphics memory: %s kB\n"
+msgstr "Grafik-hukommelse: %s kb\n"
-#: ../../printer/main.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Netværksprinter (TCP/sokkel)"
+msgid ""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+msgstr ""
+"Dette program er gratis programmel; du kan redistribuere det og/eller ændre\n"
+"det i henhold til betingelserne i GNU General Public License, som publiceret "
+"af\n"
+"Free Software Foundation; enten version 2, eller enhver senere udgave\n"
+"af licensen.\n"
+"\n"
+"Dette program er udgivet i hćb om at det vil være anvendeligt, men\n"
+"UDEN NOGEN FORM FOR GARANTI; heller ikke garanti om\n"
+"SALGBARHED eller EGNETHED TIL ET BESTEMT FORMĆL. Se GNU\n"
+"General Public License for flere detaljer.\n"
+"\n"
+"Du skulle have modtaget en kopi af GNU General Public License\n"
+"sammen med dette program; hvis ikke, skriv til Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,\n"
+"USA.\n"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Printer on remote lpd server"
-msgstr "Printer pć ekstern lpd server"
+msgid "access to compilation tools"
+msgstr "adgang til oversættelsesværktűjer"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Printer pć ekstern CUPS server"
+msgid "Please select data to restore..."
+msgstr "Udvælg de data du vil genskabe..."
-#: ../../printer/main.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Remote printer"
-msgstr "Ekstern printer"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
+msgstr ""
+"Hvis du planlægger at bruge Yaboot, skal du huske at efterlade fri plads pć\n"
+"begyndelsen af disken (2048 sektorer skulle være nok)"
-#: ../../printer/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Local printer"
-msgstr "Lokal printer"
+msgid "Standard test page"
+msgstr "Standard testside"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configuring applications..."
-msgstr "Konfigurerer programmer..."
+msgid "Create"
+msgstr "Opret"
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
+msgid "What"
+msgstr "Hvad"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Fjerner printer \"%s\"..."
+msgid "There was an error ordering packages:"
+msgstr "Der opstod en fejl ved sorteringen af pakkerne:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Űnsker du virkelig at fjerne printeren \"%s\"?"
+msgid "Bulgarian (BDS)"
+msgstr "Bulgarsk (BDS)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Remove printer"
-msgstr "Fjern printer"
+msgid "Disable Server"
+msgstr "Deaktivér server"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Learn how to use this printer"
-msgstr "Lær hvordan denne printer bruges"
+msgid "Filesystem encryption key"
+msgstr "Krypteringsnűgle for filsystem"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Print test pages"
-msgstr "Udskriver testsider"
+msgid "Gujarati"
+msgstr "Gujarati"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
msgstr ""
-"Kunne ikke fjerne printeren \"%s\" fra Star Office/OpenOffice.org/GIMP.org."
+"Vælg det fűrste tal i 10-omrćdet som du űnsker at redigere,\n"
+"Eller tryk retur for at fortsætte.\n"
+"Dit valg? "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
-msgstr "Printeren \"%s\" blev fjernet fra Star Office/OpenOffice.org/GIMP.org."
+msgid "Save theme"
+msgstr "gem temaer"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Fjerner printer fra Star Office/OpenOffice.org/GIMP.org"
+msgid "group"
+msgstr "gruppe"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Fjern denne printer fra Star Office/OpenOffice.org/GIMP.org"
+msgid "Brazil"
+msgstr "Brasilien"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-"Kunne ikke tilfűje printeren \"%s\" til Star Office/OpenOffice.org/GIMP.org."
+msgid "Auto Install"
+msgstr "Autoinstallation"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-"Printeren \"%s\" blev tilfűjet til Star Office/OpenOffice.org/GIMP.org."
+msgid "Network Configuration Wizard"
+msgstr "Konfigurér netværk"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Tilfűjer printer til Star Office/OpenOffice.org/GIMP.org"
+msgid "Removable media automounting"
+msgstr "Automontering af flytbare medier"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Tilfűj denne printer til Star Office/OpenOffice.org/GIMP.org"
+msgid "Printing"
+msgstr "Printning"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Printeren '%s' er nu sat som standard-printer."
+msgid "Unkown driver"
+msgstr "Ukendt drivprogram"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Default printer"
-msgstr "Standard printer"
+msgid ""
+"There are no printers found which are directly connected to your machine"
+msgstr ""
+"Der blev ikke fundet nogen printere som er direkte tilsluttede til din "
+"maskine"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Set this printer as the default"
-msgstr "Sæt printeren som standard-printer"
+msgid "Create a new partition"
+msgstr "Opret en ny partition"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Printer options"
-msgstr "Printer-muligheder"
+msgid "Driver:"
+msgstr "Drivprogram:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Printer manufacturer, model"
-msgstr "Printerproducent, model"
+msgid "unknown"
+msgstr "ukendt"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "Printerproducent, model, driver"
+msgid "Use fdisk"
+msgstr "Brug fdisk"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Fjerner gammel printer \"%s\"..."
+msgid "MOVE YOUR WHEEL!"
+msgstr "FLYT PĆ HJULET!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Printer name, description, location"
-msgstr "Printernavn, beskrivelse, sted"
+msgid "sent: "
+msgstr "sendt: "
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Printer connection type"
-msgstr "Printeropkoblingstype"
+msgid "Automatic IP"
+msgstr "Automatisk IP"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Raw printer"
-msgstr "Rć printer"
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+" Note that two different options are available after clicking the button:\n"
+"\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
+msgstr ""
+"Værsgo'. Installationen en nu færdig og dit GNU/Linux-system er nu klar til "
+"brug. Klik bare '%s' for at genstarte systemet. Den fűrste ting, som du "
+"burde se, efter din maskine har lavet sine test af maskinel, er "
+"opstartsmenuen, som giver dig valg af det operativsystem der skal startes.\n"
+"\n"
+"'%s'-knappen viser to ekstra knapper for at:\n"
+"\n"
+" * '%s': for at oprette en installerings- diskette, som automatisk vil "
+"udfűre en hel installation uden hjælp fra en operatűr, magen til den "
+"installation du lige har konfigureret.\n"
+"\n"
+" Bemærk at to forskellige muligheder er tilstede efter klik pć knappen:\n"
+"\n"
+" * '%s': Dette er en delvist automatiseret installering. "
+"Partitioneringstrinnet er den eneste interaktive procedure.\n"
+"\n"
+" * '%s': Fuldautomatisk installering: harddisken bliver fuldstændig "
+"genoverskrevet, alle data forsvinder.\n"
+"\n"
+" Denne facilitet er meget nyttig ved installering af et antal lignende "
+"maskiner. Se afsnittet om autoinstallering pć vores websted for yderligere "
+"oplysninger.\n"
+"\n"
+" * '%s'(*): Gemmer en liste med pakkevalget. For at bruge dette pakkevalg i "
+"en anden installation kan disketten indsættes i drevet og installeringen kan "
+"startes. Brug [F1]-tasten pć opstartsskærmen og indtast >>linux defcfg="
+"\"floppy\"<<.\n"
+"\n"
+"(*) Du skal have en diskette formateret til FAT (denne oprettes i GNU/Linux "
+"ved at skive \"mformat a:\")"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Do it!"
-msgstr "Gűr det!"
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking-mus"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Close"
-msgstr "Luk"
+msgid "Configuration of a remote printer"
+msgstr "Konfiguration af en ekstern printer"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Printer %s\n"
-"Hvad űnsker du at forandre pć, pć denne printer?"
+msgid "Moldova"
+msgstr "Moldova"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Modify printer configuration"
-msgstr "Ændr printerkonfiguration"
+msgid "Please check if you want to erase your tape before the backup."
+msgstr "Markér om du vil slette dit bćnd fűr sikkerhedskopi laves"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Add a new printer"
-msgstr "Tilfűj en ny printer"
+msgid "An online platform to respond to enterprise support needs."
+msgstr "En platform pć nettet som tilgodesér firmaers specifikke supportbehov"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Normal Mode"
-msgstr "Normal udgave"
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "Url burde begynde med 'ftp:' eller 'http:'"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Change the printing system"
-msgstr "Ændr printsystemet"
+msgid "Add a new rule at the end"
+msgstr "Tilfűj en ny regel i slutningen"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "CUPS configuration"
-msgstr "CUPS-konfiguration"
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
+msgstr ""
+"Du kan ogsć bestemme her om dine printere pć eksterne maskiner bűr være "
+"automatisk tilgængelige pć denne maskine."
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgid ""
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
msgstr ""
-"Opfrisk printerliste (for at vise alle tilgængelige eksterne CUPS-printere)"
+"Du kan nu sætte parametre til modulet %s.\n"
+"Parametrene er i formatet ``navn=værdi navn2=værdi2 ...''.\n"
+"F.eks., ``io=0x300 irq=7''"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr "Vís alle tilgængelige eksterne CUPS-printere"
+msgid "Quit without writing the partition table?"
+msgstr "Afslut uden at skrive partitionstabellen?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"De fűlgende printere er konfigureret. Dobbeltklik pć en printer for at ændre "
-"dens indstillinger, for at gűre den til standard-printer, eller for at se "
-"information om den."
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Printing system: "
-msgstr "Printsystem: "
+msgid "Installing packages..."
+msgstr "Installerer pakker..."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Checking installed software..."
-msgstr "Tjekker installeret programmel..."
+msgid "Dutch"
+msgstr "Hollandsk"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Installing Foomatic..."
-msgstr "Installerer Foomatic..."
+msgid "The following packages need to be installed:\n"
+msgstr "De fűlgende pakker behűver at blive installeret\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "Kunne ikke konfigurere printer '%s'!"
+msgid "Angola"
+msgstr "Angola"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Konfigurerer printer '%s'..."
+msgid "service setting"
+msgstr "opsætning af tjenester"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Reading printer data..."
-msgstr "Læser printerdata ..."
+msgid "Custom"
+msgstr "Tilpasset"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Hvilket printersystem (spooler) űnsker du at bruge?"
+msgid "File is already used by another loopback, choose another one"
+msgstr "Filen er allerede brugt af en anden loopback, vælg en anden fil"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Select Printer Spooler"
-msgstr "Vælg printerkű-behandler"
+msgid "Read-only"
+msgstr "Skrivebeskyttet"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Setting Default Printer..."
-msgstr "Sætter standard printer..."
+msgid "Latvia"
+msgstr "Letland"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Installing %s ..."
-msgstr "Installerer %s..."
+msgid "No known driver"
+msgstr "Ingen kendt driverrutine"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Removing %s ..."
-msgstr "Fjerner %s ..."
+msgid "1 MB"
+msgstr "1 Mb"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
msgstr ""
-"Printsystemet (%s) vil ikke blive startet automatisk, nćr maskinen startes "
-"op.\n"
-"Det er muligt at den automatiske opstart blev slćet fra ved ændring til et "
-"hűjere sikkerhedsniveau, fordi printsystemet er et muligt angrebspunkt.\n"
-"\n"
-"Űnsker du at have den automatiske opstart af printsystemet slćet til igen?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Starter printsystemet ved opstart"
+"Hvis det ikke er den du űnsker at opsætte sć indtast et enhedsnavn/filnavn "
+"pć inddatalinjen"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksound:1
#, c-format
msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
"\n"
-"Do you really want to configure printing on this machine?"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-"Du er ved at installere printsystemet %s pć et system kűrende pć "
-"sikkerhedsniveau %s.\n"
+"Intet lydkort blev genkendt pć din maskine. Tjek venligst at et lydkort der "
+"understűttes af Linux er korrekt isat.\n"
"\n"
-"Dette printsystem kűrer som en dæmon (baggrundsproces) som venter pć "
-"printeropgaver og behandler dem. Denne dæmon er ogsć tilgængelig for "
-"eksterne maskiner via netværket, og derfor er det et muligt angrebspunkt. "
-"Derfor bliver kun nogle fć udvalgte dæmoner startet op som standard i dette "
-"sikkerhedsniveau.\n"
"\n"
-"Űnsker du virkelig at konfigurere udskrivning pć denne maskine?"
+"Du kan besűge vores database over udstyr pć:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Installerer et printersystem pć sikkerhedsniveauet %s"
+msgid "Configure Local Area Network..."
+msgstr "Konfigurér lokalnetværk..."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "paranoid"
-msgstr "paranoid"
+msgid "Launch the sound system on your machine"
+msgstr "Start lydsystemet pć din maskine"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "high"
-msgstr "hűj"
+msgid "Preparing printer database..."
+msgstr "Forbereder printerdatabase: ..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Restarting printing system..."
-msgstr "Genstarter printsystemet ..."
+msgid "Information"
+msgstr "Informationer"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Configuration of a remote printer"
-msgstr "Konfiguration af en ekstern printer"
+msgid "No network card"
+msgstr "Intet netkort"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Netværksadgangen kűrte ikke og kunne ikke startes. Tjek din konfiguration og "
-"dit udstyr. Prűv derefter at konfigurere din eksterne printer igen."
+msgid "Which filesystem do you want?"
+msgstr "Hvilket filsystem űnsker du at bruge?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"Netværksopsætningen lavet under installationen kan ikke startes nu. Tjek om "
-"netværket bliver tilgængeligt efter opstart af dit system, og ret "
-"konfigurationen med Mandrake Kontrolcenter, afsnittet 'Netværk og internet'/ "
-"'Forbindelse', og konfigurér derefter printeren ogsć med Mandrake "
-"Kontrolcenter, afsnittet om 'Maskinel'/'Printer'"
+msgid "3 buttons"
+msgstr "3 knapper"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configure the network now"
-msgstr "Konfigurér netværket nu"
+msgid "Detailed information"
+msgstr "Detaljeret information"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Go on without configuring the network"
-msgstr "Fortsæt med konfigurering af netværk"
+msgid "Malta"
+msgstr "Malta"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
+"Printer default settings\n"
+"\n"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
msgstr ""
-"Du er ved at konfigurere en ekstern printer. Dette kræver en virkende "
-"netværksadgang, men dit netværk er endnu ikke konfigureret. Hvis du vil "
-"fortsætte uden en netværkskonfiguration, vil du ikke kunne bruge printeren "
-"som du konfigurerer nu. Hvordan űnsker du at fortsætte?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Network functionality not configured"
-msgstr "Netværksfunktionalitet ikke konfigureret"
+"Standardprinterens indstillinger\n"
+"\n"
+"Du bűr tjekke at sidestűrrelsen og blæktypen/udskriftstilstanden (hvis til "
+"stede) og ogsć konfigurationen af laserprinterudstyr (hukommelse, duplex-"
+"enhed, ekstra bakker) er sat rigtigt. Bemærk at en meget god "
+"udskriftskvalitet kan gűre udskriften betydeligt langsommere."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Starting network..."
-msgstr "Starter netværk ..."
+msgid "This floppy is not FAT formatted"
+msgstr "Denne diskette er ikke formatteret til FAT"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Refreshing printer data..."
-msgstr "Opfrisker printerdata ..."
+msgid "Configuring network"
+msgstr "Konfigurerer netværk"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Du har overfűrt din tidligere standard-printer '%s', skal den ogsć være "
-"standard-printer under det nye printersystem %s?"
+msgid "Graphic Card"
+msgstr "Grafikkort"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Transfer printer configuration"
-msgstr "Overfűr printerkonfiguration"
+msgid "Resizing Windows partition"
+msgstr "Udregner Windows-filsystemets grænser"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Transferring %s..."
-msgstr "Overfűrer %s ..."
+msgid "Provider dns 1 (optional)"
+msgstr "Udbyder DNS 1 (valgfri)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "New printer name"
-msgstr "Nyt printernavn"
+msgid "Cameroon"
+msgstr "Cameroun"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
msgstr ""
-"Printeren \"%s\" eksisterer allerede,\n"
-"űnsker du virkelig at overskrive dens konfiguration?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Navn pć printer bűr kun indeholde bogstaver, tal og understregen _"
+"Du kan nu partitionere %s.\n"
+"Nćr du er færdig, sć husk at gemme med 'w'"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Transfer"
-msgstr "Overfűr"
+msgid "Close"
+msgstr "Luk"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
msgstr ""
-"En printer med navnet \"%s\" eksisterer allerede pć %s. \n"
-"Klik \"Overfűr\" for at overskrive.\n"
-"Du kan ogsć give et nyt printernavn, eller overspringe denne printer."
+"'%s': Tjek det aktuelle valg af land. Hvis du ikke er i dette land, sć klik "
+"pć '%s'-knappen og vælg et andet. Hvis dit land ikke er pć den fűrste liste "
+"der vistes, sć klik pć '%s'-knappen for at fć den komplette liste over lande."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Do not transfer printers"
-msgstr "Overfűr ikke printere"
+msgid "Calendar"
+msgstr "Kalender"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
+"Restore Selected\n"
+"Catalog Entry"
msgstr ""
-"\n"
-"Vælg printerene som du vil overflytte og klik\n"
-"\"Overfűr\"."
+"Genskab valgt\n"
+"katalogpost"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
msgstr ""
-"\n"
-"Printere konfigureret med PPD-filerne, som producenten har lavet, eller med "
-"CUPS egne drivere kan heller ikke overflyttes."
+"For at bruge en ekstern printer, skal du opgive værtsnavnet\n"
+"for printerserveren og navnet pć printeren pć denne server."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Desuden kan kűer lavet med dette program eller \"foomatic -configure\" ikke "
-"overflyttes."
+msgid "Iceland"
+msgstr "Island"
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD og LPRng understűtter ikke IPP printere.\n"
+msgid "consolehelper missing"
+msgstr "konsolhjælper mangler"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ understűtter kun lokale printere, eksterne LPD printere, og Sokkel/TCP "
-"printere.\n"
+msgid "stopped"
+msgstr "stoppet"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS understűtter ikke printere pć Novellservere eller printere som sender "
-"dataene ind i en frit-formet kommando.\n"
+msgid "Whether the FPU has an irq vector"
+msgstr "Om FPU-en har en irq-vektor"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Du kan kopiere printerkonfigurationen du har sat op for kűserveren %s til %"
-"s, din nuværende kűserver. Al konfigurationsdata (printernavn, beskrivelse, "
-"opkoblingstype og standardindstillinger) bliver overtaget, men ikke "
-"opgaver.\n"
-"Ikke alle kűer kan overfűres pć grund af:\n"
+msgid "Ext2"
+msgstr "Ext2"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-"Din printer blev konfigureret automatisk til at give dig adgang til fotokort-"
-"drevene fra din PC. Nu kan du fć adgang til dine fotokort med det grafiske "
-"program 'MtoolsFM' (Menu: 'Programmer' -> 'Filværktűjer' -> 'Mtools "
-"Filadministration') eller kommandolinjeværktűjet 'mtools' (indtast 'man "
-"mtools' pć kommandolinjen for mere information). Du finder kortets filsystem "
-"under drevbogstavet 'p:', eller fűlgende drevbogstaver hvis du har mere end "
-"én HP-printer med fotokortdrev. I 'MtoolsFM' kan du skifte mellem "
-"drevbogstaver med feltet i de űverste hűjre hjűrner af fillisterne."
+msgid "Expand Tree"
+msgstr "Udvid træ"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
+"The old \"%s\" driver is blacklisted.\n"
"\n"
-"Do not use \"scannerdrake\" for this device!"
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-"Din multifunktionsenhed blev konfigureret automatisk til at kunne skanne. Nu "
-"kan du skanne med 'scanimage' ('scanimage -d hp:%s' for at angive skanneren "
-"hvis du har mere end én) fra kommandolinjen eller med de grafiske "
-"grænseflader 'xscanimage' eller 'xsane'. Hvis du bruger GIMP kan du ogsć "
-"skanne ved at vælge det rigtige punkt i menuen 'Filer/Hent'. Brug ogsć 'man "
-"scanimage' pć kommandolinjen for at fć mere information\n"
+"Den gamle \"%s\"-driver er sortlistet.\n"
"\n"
-"Brug ikke \"scannerdrake\" pć denne enhed!"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printing test page(s)..."
-msgstr "Udskriver testsider..."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Print option list"
-msgstr "Liste med printermuligheder"
+"Den er blevet rapporteret at lave fejl i kernen ved afslutningen.\n"
+"\n"
+"Den nye \"%s\"-driver vil fűrst blive brugt ved næste systemopstart."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Udskriver pć printeren '%s'"
+msgid "Expert Mode"
+msgstr "Eksperttilstand"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Udskriver/Adgang til fotokort pć '%s'"
+msgid "Printer options"
+msgstr "Printer-muligheder"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Udskriver/Skanner pć '%s'"
+msgid "Local Network adress"
+msgstr "Adresse pć lokalnetværk"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Udskriver/Skanner/Fotokort pć '%s'"
+msgid "Backup your System files. (/etc directory)"
+msgstr "Lav sikkerhedkopi af dine systemfiler. (/etc kataloget)"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
+"\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
"\n"
+"Do you want to install the updates ?"
msgstr ""
-"Hvilke muligheder der er for den aktuelle printer kan du enten læse pć "
-"listen vist nedenfor, eller klikke pć knappen 'Liste med printermuligheder'.%"
-"s%s%s\n"
+"Du har nu mulighed for at hente opdaterede pakker som er blevet opdateret\n"
+"efter distributionen blev gjort tilgængelig.\n"
+"\n"
+"Du vil fć sikkerhedsrettelser eller fejlrettelser, men du skal have en\n"
+"internet-opkobling for at fortsætte.\n"
+"\n"
+"Űnsker du at installere opdateringerne?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Samba Server"
+msgstr "Samba-server"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg, alert=1)\n"
"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
+"Enable/Disable IP spoofing protection."
msgstr ""
+"Argumenter: (arg, alert=1)\n"
"\n"
-"'%s'- og '%s'-kommandoerne tillader ogsć ændring af indstillingsmulighederne "
-"for et bestemt udskriftsjob. Tilfűj blot de űnskede indstillinger til "
-"kommandolinjen, fx '%s <fil>'.\n"
+"Aktivér/deaktivér beskyttlse mod IP-spoofing."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Du kan ogsć bruge den grafiske grænseflade 'xpdq' til at sætte "
-"valgmuligheder og behandle udskriftsopgaver.\n"
-"Hvis du bruger KDE som skrivebordsmiljű, har du en 'panik-knap', en ikon pć "
-"skrivebordet, benævnt med 'STOP printer!', som stopper alle udskriftsopgaver "
-"űjeblikkeligt nćr du klikker pć den. Dette er fx nyttigt hvis papiret "
-"krűller sammen.\n"
+msgid "Australian Optus cable TV"
+msgstr "Australsk Optus kabel-tv"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
msgstr ""
-"Denne kommando kan du ogsć bruge fra 'udskrivningskommando'-feltet i "
-"udskriftsdialogerne i mange programmer, men lad være med at angive filnavnet "
-"her, fordi filen der skal udskrives leveres af programmet.\n"
+" <Tab>/<Alt-Tab> mellem elementer | <Space> vælger | <F12> næste skærm "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"For at udskrive en fil fra kommandolinjen (terminalvinduet) brug da "
-"kommandoen '%s <fil>' eller '%s <fil>'.\n"
+msgid "Subnet:"
+msgstr "Undernet:"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"For at fć en liste af tilgængelige muligheder for den aktuelle printer kan "
-"du klikke pć knappen 'Liste med printermuligheder'."
+msgid "Zimbabwe"
+msgstr "Zimbabwe"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"'%s'-kommandoen tillader ogsć ændring af indstillingsmulighederne for et "
-"bestemt udskriftsjob. Tilfűj blot de űnskede indstillinger til "
-"kommandolinjen, fx '%s <fil>\". "
+msgid "Please enter the host name or IP."
+msgstr "Indtast værtsnavn eller IP."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"For at udskrive en fil fra kommandolinjen (terminalvinduet) brug da "
-"kommandoen '%s <fil>'.\n"
+msgid "When"
+msgstr "Hvornćr"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Second DNS Server (optional)"
+msgstr "Anden DNS-server (valgfri)"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Finland"
+msgstr "Finland"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Here is a list of the available printing options for the current printer:\n"
+"Arguments: (arg)\n"
"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
msgstr ""
-"Her er en liste over tilgængelige printmuligheder for den aktuelle printer:\n"
+"Argumenter: (arg)\n"
"\n"
+"Autorisér alle tjenester kontrolleret af tcp_wrappers (se hosts.deny(5)) "
+"hvis \\fIarg\\fP = ALL. Kun de lokale\n"
+"hvis \\fIarg\\fP = LOCAL og ingen hvis \\fIarg\\fP = NONE. For at autorisere "
+"de tjenester du behűver, brug /etc/hosts.allow\n"
+"(se hosts.allow(5))."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Disse kommandoer kan du ogsć bruge fra 'udskrivningskommando'-feltet i "
-"udskriftsdialogerne i mange programmer, men lad være med at angive filnavnet "
-"her, fordi filen der skal udskrives leveres af programmet.\n"
+msgid "Color depth: %s\n"
+msgstr "Farvedybde: %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"For at skrive en fil fra kommandolinjen (terminalvinduet) kan du enten bruge "
-"programmet '%s <fil>' eller et grafisk printerværktűj: 'xpp <fil>' eller "
-"'kprinter <fil>'. De grafiske værktűjer lader dig vælge printeren og ændre "
-"indstillingerne pć en nem mćde.\n"
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "Du kan ikke fravælge denne pakke. Den skal opgraderes"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Did it work properly?"
-msgstr "Fungerer det korrekt?"
+msgid "Loading from floppy"
+msgstr "Indlæser fra diskette"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
-"Testsider er sendt til printeren.\n"
-"Det kan tage lidt tid fűr printeren starter.\n"
+"Drakperm bruges til at se filer i brug for at rette tilladelser, ejere og "
+"grupper via msec.\n"
+"Du kan ogsć redigere dine egne regler som vil tilsidesætte standard-reglerne."
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testsider er blevet sendt til printeren.\n"
-"Dette kan tage lidt tid fűr printeren starter.\n"
-"Udskrivningsstatus:\n"
-"%s\n"
-"\n"
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do not print any test page"
-msgstr "Udskriv ikke nogen testsider"
+msgid "Slovenia"
+msgstr "Slovenien"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Photo test page"
-msgstr "Fototestside"
+msgid ""
+"Enter a user\n"
+"%s"
+msgstr ""
+"Indtast en bruger\n"
+"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Alternative test page (A4)"
-msgstr "Alternativ testside (A4)"
+msgid ""
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
+msgstr ""
+"- PCI- og USB-enheder: dette viser producenten, enheden, underproducent og "
+"underenhed PCI/USB id'er"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "Alternativ testside (letter)"
+msgid "ProgressBar color selection"
+msgstr "Valg af farve for forlűbslinje"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Standard test page"
-msgstr "Standard testside"
+msgid ""
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
+msgstr ""
+"Her er fűlgende typer indgange.\n"
+"Du kan tilfűje flere eller ændre de eksisterende."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Print"
-msgstr "Udskriv"
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "No test pages"
-msgstr "Ingen testsider"
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
msgstr ""
-"Vælg testsiderne du űnsker at udskrive.\n"
-"Bemærk: fototestsiden kan tage ret lang tid at skrive ud, og pć "
-"laserprintere med for lidt hukommelse vil den mćske ikke skrives ud i det "
-"hele taget. Som regel vil det være nok at udskrive standard-testsiden."
+"Kűrer planlagte kommandoer med 'at' kommandoen pć tiden specificeret da 'at' "
+"blev kűrt, og kűrer batch kommandoer nćr den gennemsnitlige systembelastning "
+"er lav nok"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Test pages"
-msgstr "Testsider"
+msgid "Radio support:"
+msgstr "Radio-understűttelse:"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Űnsker du fremover at bruge printeren \"%s\"\n"
-"som standard?"
+msgid "Installing SANE packages..."
+msgstr "Installerer SANE-pakker..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Option %s out of range!"
-msgstr "Valg %s er udenfor omrćde!"
+msgid "boot disk creation"
+msgstr "fremstilling af opstartsdiskette"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Option %s must be a number!"
-msgstr "Valg %s skal være et tal!"
+msgid "LDAP"
+msgstr "LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Valg %s skal være et helt tal!"
+msgid "SILO"
+msgstr "SILO"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
#, c-format
-msgid "Printer default settings"
-msgstr "Standardindstillinger for printer"
+msgid "Change type"
+msgstr "Skift type"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "SILO Installation"
+msgstr "SILO-installering"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use CD/DVDROM to backup"
+msgstr "Brug CD/DVDROM til sikkerhedskopiering"
+
+#: ../../install_messages.pm:1
#, c-format
msgid ""
-"Printer default settings\n"
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
-"Standardprinterens indstillinger\n"
+"Tillykke, installationen er færdig.\n"
+"Fjern boot-mediet og tryk retur for at genstarte.\n"
"\n"
-"Du bűr tjekke at sidestűrrelsen og blæktypen/udskriftstilstanden (hvis til "
-"stede) og ogsć konfigurationen af laserprinterudstyr (hukommelse, duplex-"
-"enhed, ekstra bakker) er sat rigtigt. Bemærk at en meget god "
-"udskriftskvalitet kan gűre udskriften betydeligt langsommere."
+"\n"
+"For information om rettelser til denne udgivelse af Mandrake Linux, se "
+"Errata pć:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information om konfigurering af dit system kan du finde i kapitlet om efter-"
+"installation i den Officielle Mandrake Linux Brugervejledning."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr "Oplægning af firmware for HP LaserJet 1000"
+msgid "paranoid"
+msgstr "paranoid"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Send mail report after each backup to:"
+msgstr "Send epost-rapport efter hver sikkerhedskopiering til:"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+"This command you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications. But here do not supply the file name "
+"because the file to print is provided by the application.\n"
msgstr ""
-"For at kunne udskrive pć din Lexmark inkjet fra denne konfigurering skal du "
-"bruge inkjet printerdriverne leveret af Lexmark (http://www.lexmark.com/). "
-"Klik pć 'Drivers'-knappen. Vælg sć din model og derefter 'Linux' som "
-"operativsystem. Driverne kommer som RPM-pakker eller skal-skripter med "
-"interaktiv grafisk installation. Du behűver ikke lave denne konfiguration "
-"via de grafiske grænseflader. Annullér direkte efter licensaftalen. Udskriv "
-"derefter justeringssider for skrivehovedet med 'lexmarkmaintain', og justér "
-"opsætningen af justeringen af hovedet med dette program."
+"Denne kommando kan du ogsć bruge fra 'udskrivningskommando'-feltet i "
+"udskriftsdialogerne i mange programmer, men lad være med at angive filnavnet "
+"her, fordi filen der skal udskrives leveres af programmet.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark inkjet konfiguration"
+msgid "Resolution"
+msgstr "Oplűsning"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
msgstr ""
-"Printerdriverne til inkjet som leveres af Lexmark understűtter kun lokale "
-"printere, ikke printere pć eksterne maskiner eller printserverbokse. Forbind "
-"din printer til en lokal port eller konfigurér den pć den maskine, den er "
-"forbundet til."
+"For at skrive til en SMB printer skal du angive værtsnavnet pć SMB maskinen "
+"(bemærk at dette navn kan være forskelligt fra TCP/IP-navnet!) og muligvis "
+"IP-adressen pć printerserveren, sć vel som delenavnet for printeren du vil "
+"bruge samt nűdvendig information om brugernavn, adgangskode og arbejdsgruppe."
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse icmp echo."
msgstr ""
-"Du konfigurerer en OKI laser-winprinter. Disse printere bruger en meget "
-"speciel kommunikationsprotokol og derfor virker de kun nćr de er forbundet "
-"til den fűrste parallelle port. Nćr din printer er forbundet til en anden "
-"port eller til en printserverboks, sć forbind printeren til den fűrste "
-"parallelle port fűr du udskriver en prűveside. Ellers vil printeren ikke "
-"virke. Din opsætning af forbindelsestype vil blive ignoreret af driveren."
+"Argumenter: (arg)\n"
+"\n"
+" Acceptér/afvis icmp echo."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "OKI winprinter configuration"
-msgstr "OKI konfiguration af winprinter"
+msgid "reconfigure"
+msgstr "genkonfigurér"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
-"Hvis din printer ikke er listet, sć vælg en kompatibel (se printermanual) "
-"eller en lignende printer."
+"Dit kort kan have 3D acceleration understűttelse, men kun med XFree %s,\n"
+"VIGTIGT: Dette er eksperimentelt og kan fć din maskine til at lćse eller gć "
+"ned."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
-"\n"
-"\n"
-"Tjek venligst om Printerdrake udfűrte \n"
-"autodetekteringen af din printermodel\n"
-"korrekt. Find den korrekte model i listen\n"
-"nćr en forkert model, eller 'Rć printer' er fremhævet."
+msgid "Xinetd Service"
+msgstr "Xinetd-tjeneste"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which printer model do you have?"
-msgstr "Hvilken printermodel har du?"
+msgid "access to network tools"
+msgstr "adgang til netværksværktűjer"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer model selection"
-msgstr "Valg af printermodel"
+msgid "Firmware-Upload for HP LaserJet 1000"
+msgstr "Oplægning af firmware for HP LaserJet 1000"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Reading printer database..."
-msgstr "Læser database over printere ..."
+msgid ""
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
+msgstr ""
+"Mandrake Linux 9.1 giver dig mulighed for at bruge det allernyeste "
+"programmel til at afspille musik, redigere og organisere dine billeder eller "
+"foto, og se videoer."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select model manually"
-msgstr "Vælg model manuelt"
+msgid "Here is a list of all auto-detected printers. "
+msgstr "Her er en liste med alle autodetekterede printere. "
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The model is correct"
-msgstr "Modellen er korrekt"
+msgid ""
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
+msgstr ""
+"Fejl ved installation af aboot, \n"
+"forsűg at gennemtvinge installation selv om dette kan űdelægge den fűrste "
+"partition?"
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
+"Options Description:\n"
"\n"
-"For your printer Printerdrake has found:\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
-"%s"
msgstr ""
-"Printerdrake har sammenlignet modelnavnet fra den automatiske genkendelse af "
-"printeren med modellerne listet i dens printerdatabase for at finde den "
-"bedste match. Dette valg kan være forkert, især nćr din printer slet ikke er "
-"listet i databasen. Sć tjek om valget er korrekt og klik \"Modellen er "
-"korrekt\" hvis den er, og hvis ikke sć klik \"Vælg model manuelt\" sć du kan "
-"udvælge din printermodel manuelt pć den næste skærm.\n"
+"beskrivelse af valgmuligheder:\n"
"\n"
-"Som din printer har Printerdrake fundet:\n"
+" Pć dette trin vil Drakbackup lade dig ændre:\n"
+"\n"
+" - Komprimeringsmćden:\n"
+" \n"
+" Hvis du markerer bzip2-komprimering, vil du komprimere\n"
+" dine data bedre end gzip (omkring 2-10 %%).\n"
+" Denne valgmulighed er ikke markeret som standard fordi\n"
+" denne komprimeringsmćde kræver mere tid (omkring 1000%% mere).\n"
+" \n"
+" - Opdateringsmćden:\n"
+"\n"
+" Denne valgmulighed vil opdatere din backup, men denne\n"
+" valgmulighed er ikke rigtigt nyttig fordi du skal\n"
+" dekomprimere din backup fűr du kan opdatere den.\n"
+" \n"
+" - Mćden for .backupignore:\n"
+"\n"
+" som med cvs vil Drakbackup ignorere alle referencer\n"
+" indeholdt i .backupignore-filer i hvert katalog.\n"
+" fx: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
-"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Your printer model"
-msgstr "Din printermodel"
+msgid ""
+"Restore Selected\n"
+"Files"
+msgstr ""
+"Genskab valgte\n"
+"filer"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Preparing printer database..."
-msgstr "Forbereder printerdatabase: ..."
+msgid ""
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
+msgstr ""
+"%s-eksisterer, skal den fjernes?\n"
+"\n"
+"Advarsel: Hvis du allerede har lavet denne proces skal du nok\n"
+" fjerne indgangen fra authorized_keys pć serveren."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Location"
-msgstr "Placering"
+msgid "Please fill or check the field below"
+msgstr "Udfyld eller markér feltet nedenunder"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Description"
-msgstr "Beskrivelse"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "Űnsker du at gemme /etc/fstab-ændringerne?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Name of printer"
-msgstr "Navn pć printer"
+msgid "Boot Protocol"
+msgstr "Opstartsprotokol"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Alle printere behűver et navn (f.eks. 'printer').\n"
-"Beskrivelsen og lokaliseringsfelterne behűver ikke \n"
-"udfyldes. De er kommentarer til brugerne."
+msgid "LVM-disks %s\n"
+msgstr "LVM-diske %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr "Indtast printernavn og kommentarer"
+msgid "The package %s is needed. Install it?"
+msgstr "Pakken %s kræves. Űnsker du at installere den?"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr "Gűr printerport tilgængelig for CUPS..."
+msgid "On boot"
+msgstr "Ved opstart"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Checking device and configuring HPOJ..."
-msgstr "Tjekker enhed og konfigurerer HPOJ..."
+msgid "Bus identification"
+msgstr "Bus-identifikation"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr "Adgang til fotohukommelseskort pć din HP-multifunktionsenhed"
+msgid "Please make a backup of your data first"
+msgstr "Lav gerne en sikkerhedkopi af dine data fűrst"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr "Skanning pć din HP-multifunktionsenhed"
+msgid "Vatican"
+msgstr "Vatikansk"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Installing mtools packages..."
-msgstr "Installerer mtools-pakker..."
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr "Du har mere end et diskdrev, hvilken űnsker du at installere Linux pć?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Installing SANE packages..."
-msgstr "Installerer SANE-pakker..."
+msgid "Boot ISO"
+msgstr "Start fra ISO"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installing HPOJ package..."
-msgstr "Installerer HPOJ-pakke..."
+msgid "Eritrea"
+msgstr "Eritrea"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
-"Er din printer en multi-funktionenhed fra HP eller Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 med skanner, Sony IJP-V100), en HP "
-"PhotoSmart eller en HP LaserJet 2200?"
+msgid "Remove List"
+msgstr "Fjern liste"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
-msgid "A command line must be entered!"
-msgstr "En kommandolinje skal opgives!"
+msgid "A customizable environment"
+msgstr "Et miljű der kan tilpasses"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Command line"
-msgstr "Kommandolinje"
+msgid "Inuktitut"
+msgstr "Inuktitut"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
-"Her kan du angive en vilkćrlig kommandolinje som jobbet skal kanaliseres ind "
-"i i stedet for at blive sendt direkte til en printer."
+msgid "Morocco"
+msgstr "Marokko"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pipe into command"
-msgstr "kanalisér ind i kommando"
+msgid "Which printer model do you have?"
+msgstr "Hvilken printermodel har du?"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detected model: %s %s"
-msgstr "Fandt model: %s %s"
+msgid "Add a new printer"
+msgstr "Tilfűj en ny printer"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A valid URI must be entered!"
-msgstr "En korrekt URI skal opgives!"
+msgid " All of your selected data have been "
+msgstr " Alle dine valgte data er blevet "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Printer Device URI"
-msgstr "Printer-enheds URI"
+msgid "<-- Delete"
+msgstr "<-- Slet"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Du kan direkte opgive URI til printeren. URIen skal være i henhold til enten "
-"CUPS- eller Foomatic-standarden. Bemærk at ikke alle typer URIer "
-"understűttes af alle kű-behandlere."
+msgid "Nepal"
+msgstr "Nepal"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Port"
-msgstr "Port"
+msgid "cpu # "
+msgstr "cpu-nummer "
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printer host name or IP"
-msgstr "Værtsnavn eller IP-adresse pć printer mangler!"
+msgid "chunk size"
+msgstr "enhedsstűrrelse"
-#: ../../printer/printerdrake.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "The port number should be an integer!"
-msgstr "Port-nummeret bűr være et heltal!"
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "kommandoerne fűr opstart, eller 'c' for en kommandolinie."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Værtsnavn eller IP-adresse pć printer mangler!"
+msgid "Problems installing package %s"
+msgstr "Problemer med installation af %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"For at skrive til en TCP eller sokkel-printer skal du angive værtsnavnet "
-"eller IP-adressen pć printeren, og eventuelt portnummer (standard er 9100). "
-"Pć HP JetDirect-servere er portnummeret normalt 9100, pć andre servere "
-"varierer det. Tjek manualen for dit udstyr."
+msgid "You will receive an alert if the load is higher than this value"
+msgstr "Du vil modtage en advarsel hvis belastningen er hűjere end denne værdi"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
msgstr ""
-"Vælg en af de fundne printere fra listen eller angiv værtsnavnet eller IP-"
-"adressen og eventuelt portnummer (standard er 9100) i indtastningsfelterne."
+"\n"
+"\n"
+"For at indsende en fejlrapport klik da pć rapport-knappen.\n"
+"Dette vil ćbne et vindue i en netlæser pć https://drakbug.mandrakesoft.com\n"
+" hvor du vil finde en formular der kan udfyldes. Informationen vist ovenfor "
+"vil blive overfűrt til den server\n"
+"\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/Sokkel-printer-parametre"
+msgid "Add a scanner manually"
+msgstr "Hćndpluk skanner"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Host \"%s\", port %s"
-msgstr "Vært \"%s\", port %s"
+msgid "Reload partition table"
+msgstr "Genindlæs partitionstabel"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", vært \"%s\", port %s"
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr "Ja, jeg űnsker automatisk login med denne (bruger, skrivebord)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Scanning network..."
-msgstr "Skanner netværk ..."
+msgid "Search for fonts in installed list"
+msgstr "Sűg efter skrifttyper i installeret liste"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Printer auto-detection"
-msgstr "Auto-opdagelse af printere"
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr "Lokalnetværket endte ikke med `.0', stćr af."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "NCP queue name missing!"
-msgstr "NCP-kűnavn mangler!"
+msgid "Boot"
+msgstr "Opstart"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "NCP server name missing!"
-msgstr "NCP-servernavn mangler!"
+msgid "Tuner type:"
+msgstr "Tuner-type:"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Print Queue Name"
-msgstr "Printerkű-navn"
+msgid ""
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
+msgstr ""
+"Nu er det tid til at vælge et udskrivningssystem for din maskine. Andre "
+"styresystemer tilbyder mćske ét, men Mandrake tilbyder to.Printersystemerne "
+"er hver især bedst til en bestemt konfigurationstype.\n"
+"\n"
+" * '%s' - som betyder 'print, don't queue' (udskriv, kű ej), er valget, hvis "
+"du har en direkte forbindelse til din printer, og du űnsker at kunne klare "
+"printproblemer med det samme, og du ikke har nogen printere via netværk. ('%"
+"s' vil kun behandle meget simple netværkstilfælde, og er lidt slűvt pć "
+"netværk.) Vælg 'pdq' hvis dette er din fűrste erfaring med GNU/Linux.\n"
+"\n"
+" * '%s' - 'Common Unix Printing System' (Fælles printersystem for Unix) er "
+"fremragende til at udskrive pć din lokale printer, og ogsć pć den, der stćr "
+"pć den anden side af jordkloden. Det er nemt at konfigurere, og kan virke "
+"som en server eller klient for det bedagede 'lpd'-printsystem, sć det er "
+"kompatibelt med de tidligere systemer, som stadig kan have brug for "
+"udskriftstjenester. Det er ganske stærkt, men den basale opsætning er næsten "
+"lige sć nem som for '%s'. Hvis du har brug for at dette efterligner en 'lpd'-"
+"server, skal du aktivere 'cups-lpd'-dæmonen. CUPS har grafiske grænseflader "
+"for udskrivning og valg af printermuligheder, og for administration af "
+"printeren.\n"
+"\n"
+"Du kan ændre dit valg senere ved at kűre PrinterDrake fra Mandrakes "
+"Kontrolcenter, og klikke pć ekspert-knappen."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Printer Server"
-msgstr "Printer-server"
+msgid "\"Menu\" key"
+msgstr "'Menu'-tast"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
msgstr ""
-"For at skrive til en NetWare printer skal du angive navnet pć NetWare "
-"printerserveren (bemærk at dette navn kan være forskelligt fra TCP/IP-"
-"navnet!) sćvel som kűnavnet for den printer du vil benytte samt om "
-"nűdvendigt et brugernavn og en adgangskode."
+"\n"
+"\n"
+"Tjek venligst om Printerdrake udfűrte \n"
+"autodetekteringen af din printermodel\n"
+"korrekt. Find den korrekte model i listen\n"
+"nćr en forkert model, eller 'Rć printer' er fremhævet."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "NetWare Printer Options"
-msgstr "NetWare printer-parametre"
+msgid "Security Administrator:"
+msgstr "Sikkerhedsadministrator:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
+msgid "Please enter your login"
+msgstr "Indtast dit brugernavn"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check permissions of files in the users' home."
msgstr ""
-"Forbind din printer til en Linux-server og lad dine Windows-maskiner "
-"tilslutte sig til den som klienter.\n"
-"\n"
-"Űnsker du virkelig at fortsætte med at opsætte din printer som du gűr nu?"
+"hvis sat til ja, sć tjek rettigheder pć filer i brugernes hjemmekataloger."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
msgstr ""
-"Opsæt din Windows-server til at gűre printeren tilgængelig under IPP-"
-"protokollen, og opsæt udskrift fra denne maskine med '%s'-opkoblingstypen i "
-"Printerdrake.\n"
+"Du har ingen internet-opkobling.\n"
+"Opret én fűrst ved at klikke pć 'Konfigurér'"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Fonts copy"
+msgstr "Kopi af skrifttyper"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Automated"
+msgstr "Automatisk"
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Do you want to test the configuration?"
+msgstr "Űnsker du at afprűve konfigurationen?"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
+msgstr "Printeren \"%s\" blev fjernet fra Star Office/OpenOffice.org/GIMP.org."
+
+#: ../../standalone/draksec:1
+#, c-format
+msgid ""
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+" to the Internet as a client.\n"
"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
+"High: There are already some restrictions, and more automatic checks "
+"are run every night.\n"
"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
+"Higher: The security is now high enough to use the system as a server "
+"which can accept\n"
+" connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+" should choose a lower level.\n"
"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
+"Paranoid: This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+" features are at their maximum\n"
"\n"
+"Security Administrator:\n"
+" If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+" email)"
msgstr ""
-"Du er ved at opsætte udskrivning til en Windows-konto med adgangskode. "
-"Grundet en fejl i arkitekturen af Sambas klientprogrammel bliver "
-"adgangskoden lagt i klar tekst i Samba-klientens kommandolinje, som bruges "
-"til at sende printjobbet til Windows-serveren. Sć det er muligt for enhver "
-"bruger pć denne maskine at vise adgangskoden pć skærmen ved at angive "
-"kommandoer som 'ps auxwww'.\n"
+"Standard: Dette er den normale sikkerhed anbefalet for en maskine der vil "
+"blive brugt til at \n"
+" kűre pć internettet som en klient.\n"
"\n"
-"Vi anbefaler at bruge en af de fűlgende alternativer (i alle tilfælde skal "
-"du forsikre dig om at kun maskiner fra dit lokalnetværk har adgang til din "
-"Windows-server, for eksempel ved hjælp af en brandmur):\n"
+"Hűj: Her er en del restriktioner, og flere automatiske kontroller vil "
+"blive kűrt hver nat.\n"
"\n"
-"Brug en konto uden adgangskode pć din Windows-server, sćsom 'GUEST'-kontoen "
-"eller en speciel konto som kun anvendes til udskrift. Fjern ikke "
-"adgangskodebeskyttelsen fra en personlig konto eller en administrator-"
-"konto.\n"
+"Hűjere: Sikkerheden er nu hűj nok til at bruge systemet som en server som "
+"kan tage imod forbindelser fra mange klienter. Hvis din "
+"maskine kun er en klient pć internettet, bűr du\n"
+"\t vælge et lavere niveau.\n"
"\n"
-"Opsæt din Windows-server sć printeren er tilgængelig under LPD-protokollen. "
-"Opsæt dernæst udskrift fra denne maskine med '%s'-opkoblingstypen i "
-"Printerdrake.\n"
+"Paranoid: Dette er svarende til det foregćende niveau, men systemet er helt "
+"lukket og\n"
+" sikkerhedsfaciliteter er pć deres hűjeste\n"
+"\n"
+"Sikkerhedsadministrator:\n"
+" Hvis 'Sikkerhedspćmindelser' valgmuligheden er sat, vil "
+"sikkerhedpćmindelser blive sendt til denne bruger (brugernavn eller "
+"epostadresse)"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "SECURITY WARNING!"
-msgstr "SIKKERHEDSADVARSEL!"
+msgid "Save packages selection"
+msgstr "Gem pakke-valg"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Samba share name missing!"
-msgstr "Samba-delenavn mangler!"
+msgid "Remove the last item"
+msgstr "Fjern det sidste element"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Enten servernavnet eller serverens IP skal angives!"
+msgid "User list to restore (only the most recent date per user is important)"
+msgstr "Brugerliste at genskabe (kun den nyeste dato per bruger er vigtig)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detected"
-msgstr "Auto-detekteret"
+msgid "No net boot images created!"
+msgstr "Ingen opstartsbilleder oprettet!"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Workgroup"
-msgstr "Arbejdsgruppe"
+msgid "use pptp"
+msgstr "brug pptp"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Share name"
-msgstr "Dele-navn"
+msgid "Choose which services should be automatically started at boot time"
+msgstr "Vælg hvilke tjenester der skal startes automatisk ved opstart"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SMB server IP"
-msgstr "SMB-serverens IP"
+msgid "Learn how to use this printer"
+msgstr "Lær hvordan denne printer bruges"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SMB server host"
-msgstr "SMB-servervært"
+msgid "Configure the network now"
+msgstr "Konfigurér netværket nu"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
-" Hvis den űnskede printer blev fundet, sć vælg den fra listen og tilfűj "
-"dernæst brugernavn, adgangskode og/eller arbejdsgruppe om nűdvendigt."
+msgid "Choose a mirror from which to get the packages"
+msgstr "Vælg det spejl hvorfra pakkerne skal hentes"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
msgstr ""
-"For at skrive til en SMB printer skal du angive værtsnavnet pć SMB maskinen "
-"(bemærk at dette navn kan være forskelligt fra TCP/IP-navnet!) og muligvis "
-"IP-adressen pć printerserveren, sć vel som delenavnet for printeren du vil "
-"bruge samt nűdvendig information om brugernavn, adgangskode og arbejdsgruppe."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT)-printer indstillinger"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Printer \"%s\" pć server \"%s\""
+"Programmet til at ændre stűrrelse pć FAT kan ikke behandle din partition, \n"
+"den fűlgende fejl opstod: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", printer \"%s\" pć server \"%s\""
+msgid "Which sector do you want to move it to?"
+msgstr "Hvilken sektor űnsker du at flytte den til?"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Remote printer name missing!"
-msgstr "Det eksterne værtsnavn mangler!"
+msgid "Do you want to click on this button?"
+msgstr "Űnsker du at klikke pć denne knap?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remote host name missing!"
-msgstr "Eksternt værtsnavn mangler"
+msgid "Bahamas"
+msgstr "Bahamas"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote printer name"
-msgstr "Eksternt printernavn"
+msgid "Manual configuration"
+msgstr "Manuel konfiguration"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Remote host name"
-msgstr "Eksternt værtsnavn"
+msgid "search"
+msgstr "sűg"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
msgstr ""
-"For at bruge en ekstern printer, skal du opgive værtsnavnet\n"
-"for printerserveren og navnet pć printeren pć denne server."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Parametre til ekstern lpd"
+"Denne pakke indlæser den valgte tastatur-tabel, som valgt i /etc/sysconfig/"
+"keyboard. Dette kan vælges i kbdconfig programmet. Dette bűr være slćet til "
+"pć de fleste maskiner."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Manual configuration"
-msgstr "Manuel konfiguration"
+msgid "Xpmac (installation display driver)"
+msgstr "Xpmac (installations-skærmdriver)"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Du skal vælge eller indtaste en printer/enhed!"
+msgid "Zeroconf host name must not contain a ."
+msgstr "Zeroconf værtsnavn mć ikke indeholde et ."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
msgstr ""
-"(parallelporte: /dev/lp0, /dev/lp1 ..., svarende til LPT1:, LPT2: ..., "
-"fűrste USB-printer: /dev/usb/lp0, 2. USB-printer: /dev/usb/lp1 ...)."
+"Syslog er en facilitet som mange dæmoner bruger til log beskeder\n"
+"Det er en god idé altid at kűre syslog"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Angiv hvilken port din printer er forbundet til."
+msgid "Unknown/Others"
+msgstr "Ukendt|andre"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Angiv hvilken port din printer er forbundet til eller indtast et enhedsnavn/"
-"filnavn pć inddatalinjen"
+msgid "No TV Card detected!"
+msgstr "Intet tv-kort genkendt!"
+
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Options"
+msgstr "Valg"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Angiv hvilken printer som udskriftsopgaverne skal gć til."
+msgid "The printer \"%s\" is set as the default printer now."
+msgstr "Printeren '%s' er nu sat som standard-printer."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
msgstr ""
-"Vælg den printer du űnsker at opsætte. Konfigurationen af printeren vil ske "
-"fuldstændigt automatisk. Hvis din printer ikke blev fundet korrekt eller "
-"hvis du foretrækker en tilpasset printerkonfiguration, sć slć 'Manuel "
-"konfiguration' til."
+"Du konfigurerer en OKI laser-winprinter. Disse printere bruger en meget "
+"speciel kommunikationsprotokol og derfor virker de kun nćr de er forbundet "
+"til den fűrste parallelle port. Nćr din printer er forbundet til en anden "
+"port eller til en printserverboks, sć forbind printeren til den fűrste "
+"parallelle port fűr du udskriver en prűveside. Ellers vil printeren ikke "
+"virke. Din opsætning af forbindelsestype vil blive ignoreret af driveren."
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr "Her er en liste med alle autodetekterede printere. "
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgstr "Processorens generation ( fx 8 for PentiumIII,...)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr "Der er for nærværende ingen alternative muligheder"
+msgid "Auto-detected"
+msgstr "Auto-detekteret"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-"Konfigurationen af printeren vil ske helt automatisk. Hvis din printer ikke "
-"blev fundet korrekt eller hvis du foretrækker en tilpasset "
-"printerkonfiguration, sć slć 'Manuel konfiguration' til."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "The following printer was auto-detected. "
-msgstr "De fűlgende printere blev fundet automatisk:"
+"Du er ved at konfigurere din maskine til at installere en PXE-server som en "
+"DHCP-server og en TFTP-server for at bygge en installationsserver.\n"
+"Med denne mulighed vil andre maskiner pć dit lokale netværk kunne "
+"installeres ved brug af denne maskine.\n"
+"\n"
+"Forsikr dig om at du har konfigureret din internetforbindelse med "
+"drakconnect fűr du gćr videre.\n"
+"\n"
+"Bemærk: du skal bruge en dediceret netværksadapter, for at lave et lokalt "
+"netværk (LAN)."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
-"Angiv hvilken printer som udskriftsopgaverne skal gć til eller indtast et "
-"enhedsnavn/filnavn pć inddatalinjen"
+"Det er ikke plads for 1 MB bootstrap! Installationen vil fortsætte, men for "
+"at starte dit system op, skal du lave en bootstrap partition i DiskDrake"
#: ../../printer/printerdrake.pm:1
#, c-format
@@ -12183,1094 +12102,785 @@ msgstr ""
"Angiv hvilken printer dine udskriftsopgaver skal gć til, eller indtast et "
"enhedsnavn/filnavn pć inddatalinjen"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr "Alternaltivt kan duangive et enhedsnavn/filnavn pć inddatalinjen"
+msgid "Refuse"
+msgstr "Nægt"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "HFS"
+msgstr "HFS"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
msgstr ""
-"Hvis det ikke er den du űnsker at opsætte sć indtast et enhedsnavn/filnavn "
-"pć inddatalinjen"
+"HardDrake kűrer en sűgning efter maskinel, og kan konfigurere nyt/ændret "
+"maskinel."
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, c-format
-msgid "Available printers"
-msgstr "Tilgængelige printer"
+msgid "Remote Printers"
+msgstr "Eksterne printere"
-#: ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "No printer found!"
-msgstr "Ingen printer fundet!"
+msgid "Creating and formatting file %s"
+msgstr "Opretter og formaterer fil %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "You must enter a device or file name!"
-msgstr "Du skal indtaste en enhed eller et filnavn!"
+msgid "if set to yes, check additions/removals of sgid files."
+msgstr "hvis sat til ja, sć tjek tilfűjelser og fjernelser af sgid-filer."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
-"Ingen lokal printer fundet! For at installere en printer i hćnden skal du "
-"indtaste et enhedsnavn/filnavn i inddatalinjen (parallelporte: /dev/lp0, /"
-"dev/lp1 ..., svarende til LPT1:, LPT2: ..., fűrste USB-printer: /dev/usb/"
-"lp0, 2. USB-printer: /dev/usb/lp1 ...)."
+"HP LaserJet 1000 skal have lagt sin firmware op efter at være blevet tændt. "
+"Hjemhent pakken med Windows-drivere fra HP's websted (firmwaren fra "
+"printerens CD virker ikke) og hiv firmware-filen ud af den ved at "
+"dekomprimere den selvudpakkende .exe-fil med 'unzip'-programmet og lede "
+"efter filen 'sihp1000.img'. Kopiér denne fil til kataloget '/etc/printer'. "
+"Dér vil den blive fundet af det automatiske oplæggerskript og lagt op hver "
+"gang printeren er sluttet til og tændt.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Local Printer"
-msgstr "Lokal printer"
+msgid "Choose an existing LVM to add to"
+msgstr "Vælg en eksisterende LVM som skal udvides"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "USB printer \\#%s"
-msgstr "USB-printer \\/#%s"
+msgid "xfs restart"
+msgstr "genstart af xfs"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "Printer pć parallel port \\#%s"
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
+"Printeren \"%s\" eksisterer allerede,\n"
+"űnsker du virkelig at overskrive dens konfiguration?"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Printer '%s' pć SMB/Windows server '%s'"
+msgid "No partition available"
+msgstr "ingen ledige partitioner"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Netværksprinter '%s', port %s"
+msgid "Use the scanners on hosts: "
+msgstr "Brug skannerne pć fűlgende værtsmaskiner:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Detected %s"
-msgstr "Fandt %s"
+msgid "Unselected All"
+msgstr "Fravalgte alt"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ", printer \"%s\" pć SMB/Windows-server \"%s\""
+msgid "Domain Name Resolver"
+msgstr "Lűser for domænenavn"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", netværksprinter \"%s\", port %s"
+msgid "Encryption key (again)"
+msgstr "Krypteringsnűgle (igen)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Tillykke, din printer er nu installeret og konfigureret!\n"
-"\n"
-"Du kan udskrive med 'Udskriv'-kommandoen i dit program (normalt i 'Filer'-"
-"menuen).\n"
-"\n"
-"Hvis du űnsker at tilfűje, fjerne eller omdűbe en printer, eller hvis du "
-"űnsker at ændre pć standard-indstillingerne (papirbakke, printkvalitet ...), "
-"sć vælg 'Printer' i 'Udstyr'-afsnittet i Mandrake Kontrolcentret."
+msgid "Samba share name missing!"
+msgstr "Samba-delenavn mangler!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr ""
-"Auto-opdagelse af printere tilsluttet maskiner der kűre Microsoft Windows"
+msgid "True Type install done"
+msgstr "Installation af True Type færdig"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr "Auto-opdagelse af printere tilsluttet direkte til det lokale netværk"
+msgid "Detection in progress"
+msgstr "Sűgning udfűres"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Auto-opdagelse af printere tilsluttet denne maskine"
+msgid "Build Whole Kernel -->"
+msgstr "Opbyg hele kernen -->"
+
+#: ../../install_steps.pm:1
+#, c-format
+msgid "Welcome to %s"
+msgstr "Velkommen til %s"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "Indsæt Opdater moduler-disketten i drev %s"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Bootsplash"
+msgstr "Opstartsskærm"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"The following printer\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"%s%s\n"
+"is directly connected to your system"
msgstr ""
+"Den fűlgende printer\n"
"\n"
-"Velkommen til guiden for printerinstallation\n"
-"\n"
-"Denne guide lader dig installere printere sluttet til denne maskine.\n"
-"\n"
-"Hvis du har printere sluttet til denne maskine, sć tilslut og tænd dem nu sć "
-"de kan identificeres automatisk.\n"
-"\n"
-"Klik pć \"Næste\" hvis du er klar og pć \"Annullér\" hvis du ikke vil "
-"installere printere nu."
+"%s%s\n"
+"er direkte tilsluttet til dit system"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Velkommen til guiden for printerinstallation\n"
-"\n"
-"Denne guide lader dig installere printere sluttet til denne maskine eller "
-"direkte til netværket.\n"
-"\n"
-"Hvis du har printere sluttet til denne maskine, sć tilslut og tænd dem nu sć "
-"de kan identificeres automatisk. Netværksprinterne skal ogsć være "
-"tilsluttede og tændte.\n"
-"\n"
-"Bemærk at det tager længere tid at identificere netværksprintere end at "
-"identificere lokalt tilsluttede printere. Sć deaktivér autoidentifikation af "
-"netværksprintere hvis du ikke har brug for dette.\n"
-"\n"
-"Klik pć \"Næste\" hvis du er klar og pć \"Annullér\" hvis du ikke vil "
-"installere printere nu."
+msgid "Printer sharing on hosts/networks: "
+msgstr "Printerdeling pć vært eller netværk:"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
"\n"
-"Velkommen til guiden for printerinstallation\n"
-"\n"
-"Denne guide lader dig installere printere sluttet til denne maskine, direkte "
-"til netværket eller til en ekstern Windows-maskine.\n"
-"\n"
-"Hvis du har printere sluttet til denne maskine, sć tilslut og tænd dem nu sć "
-"de kan identificeres automatisk. Netværksprinterne og Windows-maskinerne "
-"skal ogsć være tilsluttede og tændte.\n"
-"\n"
-"Bemærk at det tager længere tid at identificere netværksprintere end at "
-"identificere lokalt tilsluttede printere. Sć deaktivér autoidentifikation af "
-"netværksprintere og/eller printere sluttede til Windows-maskiner hvis du "
-"ikke har brug for dette.\n"
-"\n"
-"Klik pć \"Næste\" hvis du er klar og pć \"Annullér\" hvis du ikke vil "
-"installere printere nu."
+"'%s'-kommandoen tillader ogsć ændring af indstillingsmulighederne for et "
+"bestemt udskriftsjob. Tilfűj blot de űnskede indstillinger til "
+"kommandolinjen, fx '%s <fil>\". "
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
-"\n"
-"Velkommen til vejlederen for printeropsætning\n"
-"\n"
-"Denne vejleder lader dig installere lokale eller eksterne printere som skal "
-"bruges fra denne maskine, og ogsć fra andre maskiner i netværket.\n"
-"\n"
-"Den spűrger dig om alle nűdvendige oplysninger til at opsætte printere og "
-"giver dig adgang til alle tilgængelige printerdrivere, drivermuligheder og "
-"opkoblingstyper for printere."
+"I nogen tilfælde behűver %s driveren at have ekstra information for at "
+"virke\n"
+"ordentligt, selv om den normalt virker fint uden. Űnsker du at angive "
+"ekstra\n"
+"parametre for den eller tillade driveren at sondere din maskine for\n"
+"den information den behűver? Af og til vil sondering stoppe maskinen, men "
+"burde\n"
+"ikke forćrsage nogen skader."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Not the correct CD label. Disk is labelled %s."
+msgstr "Ikke korrekt cd-etiket. Cd'en har etiket %s."
+
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
"\n"
+"%s\n"
"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
+"Click on Configure to launch the setup wizard."
msgstr ""
+"Velkommen til værktűjet til deling af internetforbindelse!\n"
+"%s\n"
"\n"
-"\n"
-"Printerdrake kunne ikke finde ud af hvilken model din printer %s er. Vælg "
-"venligst den korrekte model fra listen."
+"Klik pć Konfigurér for at starte programmet til at dele din "
+"internetforbindelse!"
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid ")"
-msgstr ")"
+msgid "Cuba"
+msgstr "Cuba"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on "
-msgstr " pć "
+msgid "Searching for new printers..."
+msgstr "Sűger efter nye printere..."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "("
-msgstr "("
+msgid "Belize"
+msgstr "Belize"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configuring printer ..."
-msgstr "Konfigurerer printer ..."
+msgid " (multi-session)"
+msgstr " (multi-session)"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Searching for new printers..."
-msgstr "Sűger efter nye printere..."
+msgid "Kernel Boot Timeout"
+msgstr "Ventetid fűr kerneopstart"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"Bemærk: Afhængig af printermodel og udskriftssystem vil op til %d MB "
-"yderligere programmel blive installeret."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr "Er du sikker pć at du vil opsætte udskrift pć denne maskine?\n"
+"Dit kort kan have 3D acceleration, men kun med XFree %s.\n"
+"Dit kort er understűttet af XFree %s som kan have bedre understűttelse i 2D."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Vil du aktivere udskrift pć printerne som nævnes ovenfor?\n"
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "DrakX partitionerings-vejlederen fandt de fűlgende lűsninger:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "Vil du aktivere udskrift pć printerne i det lokale netværk?\n"
+msgid "Hungarian"
+msgstr "Ungarsk"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
msgstr ""
-"Vil du aktivere udskrift pć printerne som nævnes ovenfor eller pć printerne "
-"i det lokale netværk?\n"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr " (Forsikr dig om at alle dine printere er tilsluttede og tændte).\n"
+"Vælg din udbyder.\n"
+" Hvis de ikke er i listen, vælg Ikke listet"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr ""
-"Der blev ikke fundet nogen printere som er direkte tilsluttede til din "
-"maskine"
+msgid "Automatic time synchronization (using NTP)"
+msgstr "Automatisk tidssynkronisering (ved hjælp af NTP)"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-"\n"
-"Der findes %d ukendte printere direkte tilsluttet til dit system"
+msgid "8 MB"
+msgstr "8 Mb"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"Der findes en ukendt printer direkte tilsluttet til dit system"
+msgid "LDAP Server"
+msgstr "LDAP-server"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
msgstr ""
-"Den fűlgende printer\n"
-"\n"
-"%s%s\n"
-"er direkte tilsluttet til dit system"
+"PCMCIA understűttelse er normalt til at understűtte ting som ethernet og "
+"modemer pć bærbare. Den vil ikke blive startet medmindre den er "
+"konfigureret, sć det er sikkert at have den installeret pć maskiner der ikke "
+"har behov for den."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"De fűlgende printere\n"
-"\n"
-"%s%s\n"
-"er direkte tilsluttet til dit system"
+msgid "Choose your country"
+msgstr "Vælg dit land"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The following printers\n"
"\n"
-"%s%s\n"
-"are directly connected to your system"
+"- System Files:\n"
msgstr ""
-"De fűlgende printere\n"
"\n"
-"%s%s\n"
-"er direkte tilsluttet til dit system"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "and %d unknown printers"
-msgstr "og %d ukendte printere"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "and one unknown printer"
-msgstr "og en ukendt printer"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Checking your system..."
-msgstr "Tjekker dit system..."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Restarting CUPS..."
-msgstr "Genstarter CUPS..."
+"- Systemfiler:\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr "Denne server er allerede pć listen, og kan ikke blive tilfűjet igen.\n"
+msgid "Standalone Tools"
+msgstr "Fritstćende værktűjer"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr "Eksempler pć korrekte IP'er:\n"
+msgid "Where"
+msgstr "Hvor"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Den indtastede IP er ikke korrekt.\n"
+msgid "but not matching"
+msgstr "Men ikke samstemmende"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Server IP missing!"
-msgstr "Server-IP mangler!"
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
+msgstr ""
+"Her kan du vælge et alternativ drivprogram (enten OSS eller ALSA) for "
+"lydkortet (%s)"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr "Hvis ingen port er angivet, vil port 631 blive brugt som standard."
+msgid "Configuring PCMCIA cards..."
+msgstr "Konfigurerer PCMCIA kort..."
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr ""
-"Indtast IP-adresse og port pć værten, hvis printere du űnsker at bruge."
+msgid "kdesu missing"
+msgstr "kdesu mangler"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Tilgćr printere pć eksterne CUPS-servere"
+msgid "Encryption key"
+msgstr "Krypteringsnűgle"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Remove selected server"
-msgstr "Fjern valgte server"
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Edit selected server"
-msgstr "Redigér valgte server"
+msgid "Christmas Island"
+msgstr "Juleűerne"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add server"
-msgstr "Tilfűj server"
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr "Installation af opstarter mislykkedes. Den fűlgende fejl opstod:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
-"Tilfűj hér de CUPS-servere hvis prontere du űnsker at bruge. Du behűver kun "
-"gűre dette, hvis serverne ikke rundkaster deres printerinformation pć "
-"lokalnetværket."
+msgid "EIDE/SCSI channel"
+msgstr "EIDE/SCSI-kanal"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "IP address of host/network:"
-msgstr "IP-adresse pć vært eller netværk:"
+msgid "Set this printer as the default"
+msgstr "Sæt printeren som standard-printer"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
-"Denne vært eller dette netværk er allerede pć listen, og kan ikke blive "
-"tilfűjet igen.\n"
+msgid "partition %s"
+msgstr "partition %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr "Den indtastede vært/netværk er ikke korrekt.\n"
+msgid "Paranoid"
+msgstr "Paranoid"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Host/network IP address missing."
-msgstr "IP-adresse pć vært eller netværk mangler."
+msgid "NIS"
+msgstr "NIS"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr ""
-"Vælg netværket eller værten pć hvilken de lokale printere skal gűres "
-"tilgængelige: "
+msgid "<-- Del User"
+msgstr "<-- Slet bruger"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Sharing of local printers"
-msgstr "Deling af lokale printere"
+msgid "Location on the bus"
+msgstr "Plads pć bussen"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove selected host/network"
-msgstr "Fjern valgte vært/netværk"
+msgid "No printer found!"
+msgstr "Ingen printer fundet!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Edit selected host/network"
-msgstr "Redigér valgte vært/netværk"
+msgid "the vendor name of the device"
+msgstr "navnet pć producenten af enheden"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Add host/network"
-msgstr "Tilfűj vært/netværk"
+msgid "Erase entire disk"
+msgstr "Slet hele disken"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
-"Dette er maskinerne og netværkerne pć hvilke de lokalt forbundne printere "
-"skal gűres tilgængelige:"
+msgid " (Default)"
+msgstr " (Forvalgt)"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
msgstr ""
-"Nćr denne valgmulighed er valgt, vil CUPS hver gang den starter forsikre sig "
-"om at\n"
-"\n"
-"- hvis LPD/LPRng er installeret, vil /etc/printcap ikke overskrives af CUPS\n"
-"\n"
-"- hvis /etc/cups/cupsd.conf mangler, vil den blive oprettet\n"
-"\n"
-"- nćr printerinformation rundsendes, vil den ikke indeholde \"localhost\" "
-"som servernavn.\n"
+"Argumenter: ()\n"
"\n"
-"Hvis nogen af disse ting giver dig problemer, sć fjern denne valgmulighed, "
-"men da mć du selv sűrge for at disse punkter bliver overholdt."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "Automatisk rettelse af CUPS-konfiguration"
+"Hvis SERVER_LEVEL (eller SECURE_LEVEL hvis fraværende) er stűrre end 3\n"
+"i /etc/security/msec/security.conf, oprettes symlænken /etc/security/msec/"
+"server\n"
+"til at pege til /etc/security/msec/server.<SERVER_LEVEL>. /etc/security/msec/"
+"server\n"
+"bruges af 'chkconfig --add' til at bestemme om en tjeneste skal tilfűjes "
+"hvis den er til stede i filen under installationen af pakker."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-"Aktivering af dette vil muliggűre udskrift at rene tekstfiler pć japansk. "
-"Brug kun denne funktion hvis du virkelig űnsker at udskrive tekst pć "
-"japansk, hvis det er aktiveret kan du ikke længere udskrive bogstaver med "
-"accenter i latinske skrifttyper, og du vil ikke kunne tilpasse margenerne, "
-"tegnstűrrelse mv. Denne indstilling vedrűrer kun printere defineret pć denne "
-"maskine. Hvis du űnsker at udskrive japansk tekst pć en printer der er sat "
-"op pć en ekstern maskine, skal du aktivere denne funktion pć denne eksterne "
-"maskine."
+msgid "Automatic reconfiguration"
+msgstr "Automatisk rekonfiguration"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Japanese text printing mode"
-msgstr "Printertilstand for japansk tekst"
+msgid "Receiving Speed:"
+msgstr "Modtagelseshastighed:"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
-"For at fć adgang til eksterne CUPS-servere i dit lokale netværk behűver du "
-"bare at aktivere \"Find automatisk tilgængelige printere pć eksterne maskiner"
-"\"-valget: CUPS-serverene informerer din maskine automatisk om printerne. "
-"Alle printerne som for űjeblikket er kendt af din maskine er listet i "
-"\"Fjern-printere\" sektionen i hovedvinduet til Printerdrake. Hvis din CUPS-"
-"server ikke er i dit lokale netværk, mć du indtaste CUPS-servernes IP-"
-"adresser og evt. portnummeret for at fć printer-information fra serverne."
+msgid "Turks and Caicos Islands"
+msgstr "Turks- og Caicosűerne"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "None"
-msgstr "Ingen"
+msgid "permissions"
+msgstr "rettigheder"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Additional CUPS servers: "
-msgstr "Yderligere CUPS-servere: "
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
-#, c-format
-msgid "No remote machines"
-msgstr "Ingen ekstern maskine"
+msgid "<- Previous"
+msgstr "<- Forrige"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Custom configuration"
-msgstr "Tilrettet konfiguration"
+msgid "Internet Connection Sharing configuration"
+msgstr "Konfiguration af deling af internetforbindelse"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Printerdeling pć vært eller netværk:"
+msgid "Toggle between flat and group sorted"
+msgstr "Skift mellem flad og gruppesorteret"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr "Find tilgængelige printere pć eksterne maskiner automatisk"
+msgid "Themes"
+msgstr "Temaer"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr "Printerne pć denne maskine er tilgængelige for andre maskiner"
+msgid "Options: %s"
+msgstr "Valg: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
-"Du kan ogsć bestemme her om dine printere pć eksterne maskiner bűr være "
-"automatisk tilgængelige pć denne maskine."
+"Du bruger for űjeblikket % som opstartshćndterer.\n"
+"Klik pć Konfigurér for at starte opsætnings-vejlederen."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
-msgstr ""
-"Her kan du vælge om printerne sluttet til denne maskine skal være "
-"tilgængelige fra eksterne maskiner, og fra hvilke eksterne maskiner."
+msgid "OKI winprinter configuration"
+msgstr "OKI konfiguration af winprinter"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "CUPS printer configuration"
-msgstr "Konfiguration af CUPS-printere"
+msgid "Saint Helena"
+msgstr "Sankt Helena"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
-msgstr ""
-"Automatisk identifikation af printere (Lokal, TCP/Socket og SMB-printere)"
+msgid "Security Level"
+msgstr "Sikkerhedsniveau"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
+"Some steps are not completed.\n"
"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
msgstr ""
+"Nogen dele af installationen er ikke færdig\n"
"\n"
-"Eksterne CUPS-servere behűves ikke at blive konfigureret her: \n"
-"disse printere vil automatisk blive fundet."
+"Er du sikker pć du űnsker du at lukke nu?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "How is the printer connected?"
-msgstr "Hvordan er printeren tilsluttet?"
+msgid "Sudan"
+msgstr "Sudan"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Select Printer Connection"
-msgstr "Vælg printer-forbindelse"
+msgid "Polish (qwertz layout)"
+msgstr "Polsk (polsk layout)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
-"HP LaserJet 1000 skal have lagt sin firmware op efter at være blevet tændt. "
-"Hjemhent pakken med Windows-drivere fra HP's websted (firmwaren fra "
-"printerens CD virker ikke) og hiv firmware-filen ud af den ved at "
-"dekomprimere den selvudpakkende .exe-fil med 'unzip'-programmet og lede "
-"efter filen 'sihp1000.img'. Kopiér denne fil til kataloget '/etc/printer'. "
-"Dér vil den blive fundet af det automatiske oplæggerskript og lagt op hver "
-"gang printeren er sluttet til og tændt.\n"
+msgid "Syria"
+msgstr "Syrien"
-#: ../../security/help.pm:1
+# NOTE: this message will be displayed at boot time; that is
+# only the ascii charset will be available on most machines
+# so use only 7bit for this message (and do transliteration or
+# leave it in English, as it is the best for your language)
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
#, c-format
msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the user umask."
-msgstr ""
-"Argumenter: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
"\n"
-"Sæt brugerens umask."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (val)\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
"\n"
-"Set the shell timeout. A value of zero means no timeout."
msgstr ""
-"Argumenter: (værdi)\n"
-"\n"
-"Sæt skallens tidsudlűb. En værdi pć nul betyder intet tidsudlűb."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (size)\n"
+"Velkommen til %s styresystems-vælgeren!\n"
"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-"Argumenter: (stűrrelse)\n"
+"Vælg et styresystem i den ovenstćende liste eller\n"
+"vent %d sekunder for at starte standard.\n"
"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr "hvis sat til ja, sć tjek tilfűjelser og fjernelser af sgid-filer."
+msgid "Portuguese"
+msgstr "Portugisisk"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check open ports."
-msgstr "hvis sat til ja, sć tjek ćbne porte."
+msgid "Loopback file name: "
+msgstr "Loopback-filnavn: "
-#: ../../security/help.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
-"hvis sat, sć send postrapporter til denne postadresse, ellers send dem til "
-"root."
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "Adresse pć DNS-server skal have formatet 1.2.3.4"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr "hvis sat til ja, sć rapportér kontrolresultat per epost."
+msgid "Serbia"
+msgstr "Serbien"
-#: ../../security/help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr "hvis sat til ja, sć kontrollér filer og kataloger skrivbare for alle."
+msgid "Newzealand"
+msgstr "New Zealand"
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr "hvis sat til ja, sć rapportér kontrolresultat pć tty-en."
+msgid "This directory should remain within the root filesystem"
+msgstr "Dette katalog bűr ligge pć rod-filsystemet"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr "hvis sat til ja, sć kűr nogle tjek pć rpm-databasen."
+msgid "CapsLock key"
+msgstr "CapsLock-tast"
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
-"hvis sat til ja, sć tjek om netværksgrænsesnittene er fuldstændigt ćbne."
+msgid "Install bootloader"
+msgstr "Installér systemopstarter"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr "hvis sat til ja, sć kűr chkrootkit-kontroller."
+msgid "Select the memory size of your graphics card"
+msgstr "Vælg hukommelsesmængde for dit grafikkort"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
-"hvis sat til ja, sć tjek rettigheder pć filer i brugernes hjemmekataloger."
+"[VALGMULIGHEDER]\n"
+"Program til netværks- & Internet forbindelse og overvćgning\n"
+"\n"
+"--defaultintf grænseflade : vís denne grænseflade som standard\n"
+"--connect : kobl op til internettet hvis ikke allerede opkoblet\n"
+"--disconnect : kobl fra internettet hvis allerede opkoblet\n"
+"--force : brugt med (dis)connect : gennemtving (dis)connect.\n"
+"--status : returnerer 1 hvis opkoblet, ellers 0; afslut derefter.\n"
+"--quiet : vær ikke interaktiv. Bruges med (dis)connect."
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr "hvis sat til ja, sć tjek tilfűjelser og fjernelser af suid root-filer."
+msgid "Dynamic IP Address Pool:"
+msgstr "Adresse-rum for ynamisk IP"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr "hvis sat til ja, sć rapportér kontrolresultat til syslog."
+msgid "LVM name?"
+msgstr "LVM-navn?"
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
-msgstr ""
-"hvis sat til ja, sć tjek for tomme adgangskoder, for ingen adgangskode i /"
-"etc/shadow eller for andre brugere end root med id = 0."
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
+msgstr "Nogen enheder i maskinelklassen '%s' blev fjernet:\n"
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr "hvis sat til ja, sć kűr de daglige sikkerhedskontroller."
+msgid "Found %s %s interfaces"
+msgstr "Fandt %s %s grænsesnit"
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr "hvis sat til ja, sć efterprűv tjeksummer pć suid/sgid-filer."
+msgid "sticky-bit"
+msgstr "sticky-bit"
-#: ../../security/help.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr "hvis sat til ja, sć tjek for tomme adgangskoder i /etc/shadow."
+msgid "Post Install"
+msgstr "Efterbehandling for installering"
-#: ../../security/help.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "if set to yes, report unowned files."
-msgstr "hvis sat til ja, sć rapportér filer der ikke er ejede af nogen."
+msgid "The internal domain name"
+msgstr "Det interne domænenavn"
-#: ../../security/help.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the root umask."
-msgstr ""
-"Argumenter: (umask)\n"
-"\n"
-"Sæt umask for root."
+msgid "Card IRQ"
+msgstr "Kort IRQ"
#: ../../security/help.pm:1
#, c-format
msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
+"Arguments: (umask)\n"
"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+"Set the user umask."
msgstr ""
-"Argumenter: (længde, antalcifre=0, antalstore=0)\n"
+"Argumenter: (umask)\n"
"\n"
-"Sæt mindste længde for adgangskoder, mindste antal cifre og mindste antal "
-"store bogstaver "
+"Sæt brugerens umask."
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-"Sæt længden pć adgangskodehistorik for at forhindre genbrug af adgangskoder."
+msgid "logdrake"
+msgstr "logdrake"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
-"Argumenter: (max, inaktiv=-1)\n"
-"\n"
-"Sæt adgangskodeforældelse til \\fImax\\fP dage og forsinkelse med ændring "
-"til til \\fIinaktiv\\fP."
+"Skrifttype-import og "
+"overvćgningsapplikation \n"
+"--windows_import : importér fra alle tilgængelige windowspartitioner.\n"
+"--xls_fonts : vis alle skrifttyper som allerede eksisterer fra xls\n"
+"--strong : stærk verifikation af skrifttyper.\n"
+"--install : installér alle skrifttyper og kataloger.\n"
+"--uninstall : afinstallér alle skrifttyper og kataloger.\n"
+"--replace : erstat skrifttyper som eksisterer fra fűr\n"
+"--application : 0 ingen applikation.\n"
+" : 1 alle tilgængelige understűttede applikationer.\n"
+" : applikationsnavn, som \"so\" for staroffice \n"
+" : og gs for ghostscript."
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
-"Argumenter: (navn)\n"
-"\n"
-"Tilfűj navn som en undtagelse for hćndteringen af adgangskodeforældelse af "
-"msec."
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-" Aktivér/deaktivér sulogin(8) pć enkeltbrugerniveau."
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "Vælg det diskette-drev, du vil benytte til at lave boot-disketten"
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-" Aktivér/deaktivér daglig sikkerhedskontrol."
+msgid "LILO with text menu"
+msgstr "LILO med tekstmenu"
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-"Aktivér/deaktivér ćbenhedstjek pć ethernetkort."
+msgid "Everything (no firewall)"
+msgstr "Alt (ingen brandmur)"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-"Brug adgangskode til at autentificere brugere."
+msgid "You must specify a kernel image"
+msgstr "Du skal angive en kerne-fil"
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-" Aktiverer 'su' kun fra medlemmer af wheel-gruppen, eller tillad 'su' fra "
-"enhver bruger."
+msgid ", multi-function device on USB"
+msgstr ", multi-funktions-enhed pć USB"
-#: ../../security/help.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-"Aktivér/deaktivér msec timevise sikkerhedskontrol."
+msgid "Do"
+msgstr "Lav"
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-"Aktivér/deaktivér logning af IPv4 mærkelige pakker."
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "Kontakter spejlet for at hente listen af tilgængelige pakker"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-"Aktivér/deaktivér libsafe hvis libsafe findes pć systemet."
+msgid "Lithuanian AZERTY (old)"
+msgstr "Litauisk AZERTY (gammel)"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
-msgstr ""
-"Argumenter: (arg, alert=1)\n"
-"\n"
-"Aktivér/deaktivér beskyttlse mod IP-spoofing."
+msgid "Brazilian (ABNT-2)"
+msgstr "Brasiliansk (ABNT-2)"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
-msgstr ""
-"Argumenter: (arg, alert=1)\n"
-"\n"
-"Aktivér/deaktivér beskyttelse mod spoofning af navneopslag. Hvis\n"
-"\\fIalert\\fP er sand rapporteres ogsć til syslog."
+msgid "IP address of host/network:"
+msgstr "IP-adresse pć vært eller netværk:"
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
-"Argumenter: (arg, udtryk='*.*', dev='tty12')\n"
-"\n"
-"Aktivér/deaktivér syslog-rapporter til konsol 12. \\fIudtryk\\fP er\n"
-"udtrykket der beskriver hvad der skal logges (se syslog.conf(5) for flere "
-"detaljer) og\n"
-"'dev' enheden som loggen skal rapporteres pć."
+"y-koordinatet for forlűbsindikatorens\n"
+"űvre venstre hjűrne"
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-"Aktivér/deaktivér 'crontab' og 'at' for brugere. Put tilladte brugere i /etc/"
-"cron.allow og /etc/at.allow\n"
-"(se man at(1) og crontab(1))."
+msgid "System installation"
+msgstr "System-installering"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
-msgstr ""
-"Argumenter: ()\n"
-"\n"
-"Hvis SERVER_LEVEL (eller SECURE_LEVEL hvis fraværende) er stűrre end 3\n"
-"i /etc/security/msec/security.conf, oprettes symlænken /etc/security/msec/"
-"server\n"
-"til at pege til /etc/security/msec/server.<SERVER_LEVEL>. /etc/security/msec/"
-"server\n"
-"bruges af 'chkconfig --add' til at bestemme om en tjeneste skal tilfűjes "
-"hvis den er til stede i filen under installationen af pakker."
+msgid "Saint Vincent and the Grenadines"
+msgstr "Sankt Vincent og Grenadinerne"
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-"Autorisér alle tjenester kontrolleret af tcp_wrappers (se hosts.deny(5)) "
-"hvis \\fIarg\\fP = ALL. Kun de lokale\n"
-"hvis \\fIarg\\fP = LOCAL og ingen hvis \\fIarg\\fP = NONE. For at autorisere "
-"de tjenester du behűver, brug /etc/hosts.allow\n"
-"(se hosts.allow(5))."
+msgid "/File/_Open"
+msgstr "/Fil/_Ćbn"
#: ../../security/help.pm:1
#, c-format
@@ -13285,1082 +12895,816 @@ msgstr ""
"Argumentet angiver om klienter er autoriseret til at koble op til X-serveren "
"pć tcp-port 6000 eller ej."
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
-msgstr ""
-"Argumenter: (arg, listen_tcp=None)\n"
-"\n"
-"Tillad/forbyd X-forbindelser. Fűrste argangiver hvad der gűres\n"
-"pć klientsiden: ALL (alle forbindelser er tilladt), LOCAL (kun\n"
-"lokale forbidelser) og NONE (ingen forbindelser)."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-"Tillad/forbyd listen af brugere pć systemet pć skærmhćndteringer (kdm og "
-"gdm)."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-"Tillad/forbyd direkte root-logind."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-"Tillad/forbyd ekstern root-logind."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-"Tillad/forbyd genstart via konsolbruger."
-
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-"Hvis \\fIarg\\fP = ALL tillades /etc/issue og /etc/issue.net at eksistere. "
-"Hvis \\fIarg\\fP = NONE er ingen problemer tilladt \n"
-"ellers er kun /etc/issue tilladt."
+msgid "Location of auto_install.cfg file"
+msgstr "Placering af auto_installations .cfg-fil"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-"Tillad/forbyd autologind."
+msgid "Open Firmware Delay"
+msgstr "Ćben firmwareforsinkelse"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-" Acceptér/afvis icmp echo."
+msgid "Hungary"
+msgstr "Ungarn"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse broadcasted icmp echo."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-" Acceptér/afvis rundkastet icmp echo."
+msgid "Total progess"
+msgstr "Total fremdrift"
-#: ../../security/help.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Accept/Refuse bogus IPv4 error messages."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-"Acceptér/afvis falske IPv4-fejlmeddelelser."
+msgid "Color configuration"
+msgstr "Farve-konfiguration"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "Sikkerhedsadministrator (brugernavne eller e-post)"
+msgid "New Zealand"
+msgstr "New Zealand"
#: ../../security/level.pm:1
#, c-format
msgid ""
-"A library which defends against buffer overflow and format string attacks."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
msgstr ""
-"Et bibliotek som beskytter mod angreb via bufferoverlűb og formatstrenge."
-
-#: ../../security/level.pm:1
-#, c-format
-msgid "Use libsafe for servers"
-msgstr "Brug libsafe for servere"
-
-#: ../../security/level.pm:1
-#, c-format
-msgid "Security level"
-msgstr "Sikkerhedsniveau"
+"Der er allerede nogle begrænsninger, og flere automatiske kontroller bliver "
+"kűrt hver nat."
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose the desired security level"
-msgstr "Vælg det űnskede sikkerhedniveau"
+msgid "please choose the date to restore"
+msgstr "Vælg dato for genskabning"
-#: ../../security/level.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DrakSec Basic Options"
-msgstr "Basale valgmuligheder for DrakSec"
+msgid "Switching from ext2 to ext3"
+msgstr "Skifter fra ext2 til ext3"
-#: ../../security/level.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Baseret pć det foregćende niveau, men systemet er nu helt lukket.\n"
-"Sikkerhedsfaciliteterne er nu pć deres hűjeste niveau."
+msgid "LPRng"
+msgstr "LPRng"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"Med dette sikkerhedsniveau kan brug som server komme pć tale.\n"
-"Sikkerheden er nu hűj nok til at systemet kan bruges som server som tillader "
-"forbindelser fra mange klienter. Bemærk: hvis din maskine kun er en klient "
-"pć internettet bűr du hellere vælge et lavere niveau."
+msgid "Netherlands Antilles"
+msgstr "Hollandske Antiller"
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Der er allerede nogle begrænsninger, og flere automatiske kontroller bliver "
-"kűrt hver nat."
+msgid "Browse to new restore repository."
+msgstr "Bladr til nyt genskabelseslager."
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
msgstr ""
-"Dette er standard sikkerheds-anbefalingen for en maskine\n"
-" med forbindelse til Internettet som klient. "
+"\n"
+"Velkommen til vejlederen for printeropsætning\n"
+"\n"
+"Denne vejleder lader dig installere lokale eller eksterne printere som skal "
+"bruges fra denne maskine, og ogsć fra andre maskiner i netværket.\n"
+"\n"
+"Den spűrger dig om alle nűdvendige oplysninger til at opsætte printere og "
+"giver dig adgang til alle tilgængelige printerdrivere, drivermuligheder og "
+"opkoblingstyper for printere."
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Kontrol af adgangskode er nu aktiveret, men brug som netværksmaskine er "
-"stadig ikke anbefalet."
+msgid "and %d unknown printers"
+msgstr "og %d ukendte printere"
-#: ../../security/level.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
msgstr ""
-"Dette niveau skal bruges med omtanke. Det gűr dit system nemmere at bruge, "
-"men er meget sćrbart: det mć ikke bruges til en maskine der er i et netværk "
-"eller har forbindelse til Internettet. Der er ikke nogen kontrol af "
-"adgangskoder."
+"Tidlige Intel Pentium chips har en bug i deres flydendetalsprocessor, "
+"hvilket gűr at de ikke kan lave den krævede precision nćr de udfűrer en "
+"flydendetalsdivision (FDIV)"
-#: ../../security/level.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Paranoid"
-msgstr "Paranoid"
+msgid "No ISDN PCI card found. Please select one on the next screen."
+msgstr "Ingen ISDN PCI-kort fundet. Vælg ét i næste skærmbillede."
-#: ../../security/level.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Higher"
-msgstr "Hűjere"
+msgid "GB"
+msgstr "Gb"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "High"
-msgstr "Hűj"
+msgid "Please give a user name"
+msgstr "Indtast et brugernavn"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Poor"
-msgstr "Ringe"
+msgid "Enable CD Boot?"
+msgstr "Skal det være muligt at starte fra CD?"
-#: ../../security/level.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Welcome To Crackers"
-msgstr "Velkommen til Crackere"
+msgid " enter `void' for void entry"
+msgstr " indtast 'void' for tom indgang"
-#: ../../standalone/XFdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Log ind i %s igen for at aktivere ændringerne"
+msgid "on Hard Drive"
+msgstr "pć diskdrev"
-#: ../../standalone/XFdrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Log ud og tryk herefter pć Ctrl-Alt-Bak"
+msgid "Winmodem connection"
+msgstr "Winmodem-forbindelse"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgid ""
+"\n"
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
msgstr ""
-"/etc/hosts.allow og /etc/hosts.deny allerede konfigureret - ikke ændret"
+"\n"
+"Tillykke, din printer er nu installeret og konfigureret!\n"
+"\n"
+"Du kan udskrive med 'Udskriv'-kommandoen i dit program (normalt i 'Filer'-"
+"menuen).\n"
+"\n"
+"Hvis du űnsker at tilfűje, fjerne eller omdűbe en printer, eller hvis du "
+"űnsker at ændre pć standard-indstillingerne (papirbakke, printkvalitet ...), "
+"sć vælg 'Printer' i 'Udstyr'-afsnittet i Mandrake Kontrolcentret."
-#: ../../standalone/drakTermServ:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "Skal oprette /etc/dhcpd.conf fűrst!"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Set the password history length to prevent password reuse."
+msgstr ""
+"Argumenter: (arg)\n"
+"\n"
+"Sæt længden pć adgangskodehistorik for at forhindre genbrug af adgangskoder."
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "Noget gik galt! - er mkisofs installeret?"
+msgid "Now, you can run xawtv (under X Window!) !\n"
+msgstr "Nu kan du kűre xawtv (under X Window!)!\n"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr "Etherboot ISO-aftryk er %s"
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr "Ikke nok swap-plads til at gennemfűre installationen, tilfűj mere"
-#: ../../standalone/drakTermServ:1
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No floppy drive available!"
-msgstr "Intet tilgængeligt diskettedrev!"
+msgid "%s on %s"
+msgstr "%s pć %s"
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
-msgid "Floppy can be removed now"
-msgstr "Diskette kan fjernes nu"
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
+"GNU/Linux hćndterer tiden i GMT (Greenwich Mean Time) og oversætter den til "
+"lokal tid ifűlge den tidszone du har valgt. Hvis uret pć bundkortet er sat "
+"til lokal tid, kan du deaktivere dette ved at fravælge '%s', hvilket vil "
+"lade GNU/Linux vide at systemuret og maskinens ur er i samme tidszone. Dette "
+"er nyttigt nćr maskinen ogsć bruges til andre operativsystemer som Windows.\n"
+"\n"
+"Muligheden '%s' vil automatisk tilpasse uret ved at forbinde til en ekstern "
+"tidsserver pć internettet. For at denne facilitet kan virke, skal du have en "
+"fungerende internetforbindelse. Det er bedst at vælge en tidsserver med en "
+"placering nær ved dig. Denne mulighed installerer faktisk en tidsserver som "
+"ogsć kan bruges af andre maskiner pć dit lokalnetværk."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Couldn't access the floppy!"
-msgstr "Kunne ikke fć adgang til disketten!"
+msgid "Which is your timezone?"
+msgstr "Hvad er din tidszone?"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please insert floppy disk:"
-msgstr "Indsæt diskette:"
+msgid "Guinea"
+msgstr "Guinea"
-#: ../../standalone/drakTermServ:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Write Config"
-msgstr "Udskriv konfiguration"
+msgid "The system is now connected to the Internet."
+msgstr "Systemet er nu forbundet til Internettet."
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr "Adresse-rum for ynamisk IP"
+msgid "South Georgia and the South Sandwich Islands"
+msgstr "Syd-Georgia og Syd-Sandwich-űerne"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-"De fleste af disse værdier blev fundet\n"
-"fra dit kűrende system.\n"
-"Du kan ændre dem efter behov."
+msgid "Japan (broadcast)"
+msgstr "Japan (broadcast)"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "Konfiguration af dhcp-server"
+msgid "Mozambique"
+msgstr "Mocambique"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "IP Range End:"
-msgstr "Slut pć IP-omrćde:"
+msgid "Icon"
+msgstr "Ikon"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "IP Range Start:"
-msgstr "Start pć IP-omrćde:"
+msgid "Please choose what you want to backup"
+msgstr "Vælg hvad du vil sikkerhedkopiere"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Name Servers:"
-msgstr "Navne-servere:"
+msgid "256 colors (8 bits)"
+msgstr "256 farver (8 bit)"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "Domain Name:"
-msgstr "Domænenavn:"
+msgid "Read-write"
+msgstr "Læs-skriv"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Broadcast Address:"
-msgstr "Rundkastningsadresse:"
+msgid "Size: %s\n"
+msgstr "Stűrrelse: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Subnet Mask:"
-msgstr "Undernetmaske:"
+msgid "Hostname: "
+msgstr "Værtsnavn: "
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Routers:"
-msgstr "Rutere:"
+msgid "Chunk size %s\n"
+msgstr "Enhedsstűrrelse %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Netmask:"
-msgstr "Netmaske:"
+msgid "Build the future of Linux!"
+msgstr "Byg fremtiden for Linux!"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Subnet:"
-msgstr "Undernet:"
+msgid "Local Printer"
+msgstr "Lokal printer"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
msgstr ""
-"Skal genstarte Display Manager for at de fulde ændringer kan tage effekt. \n"
-"(service dm restart - fra konsollen)"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "dhcpd Config..."
-msgstr "Konfigurér dhcpd..."
+" Copyright (C) 2001-2002 MandrakeSoft ved DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Delete Client"
-msgstr "Slet klient"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgstr "[--file=minfil] [--word=mitord] [--explain=regudtryk] [--alert]"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "<-- Edit Client"
-msgstr "<-- Redigér klient"
+msgid "ADSL connection"
+msgstr "ADSL opkobling"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add Client -->"
-msgstr "Tilfűj klient -->"
+msgid "No configuration, please click Wizard or Advanced.\n"
+msgstr "Ingen konfiguration, klik pć Vejleder eller Avanceret.\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Allow Thin Clients"
-msgstr "Tillad tynde klienter"
+msgid "Error!"
+msgstr "Fejl!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Thin Client"
-msgstr "Tynd klient"
+msgid "cable connection detected"
+msgstr "Kabelopkobling detekteret"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No net boot images created!"
-msgstr "Ingen opstartsbilleder oprettet!"
+msgid "Permission denied transferring %s to %s"
+msgstr "Adgang nægtet ved overfűrsel af %s til %s"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "type: %s"
-msgstr "type: %s"
+msgid "/_Report Bug"
+msgstr "/_Rapportér fejl"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "<-- Del User"
-msgstr "<-- Slet bruger"
+msgid "Resize"
+msgstr "Stűrrelsesændring"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add User -->"
-msgstr "Tilfűj bruger -->"
+msgid "Dominica"
+msgstr "Dominica"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
-msgstr ""
-"!!! Indikere at adgangskoden i systemets database er forskelligt fra\n"
-" den i TerminalServer-databasen.\n"
-"Slet/tilfűj brugeren igen il TerminalServeren for at muliggűre logind."
+msgid "Please enter the device name to use for backup"
+msgstr "Indtast endhedsnavnet der skal bruges til sikkerhedskopiering"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Delete All NBIs"
-msgstr "Slet alle NBI'er"
+msgid "Resolution: %s\n"
+msgstr "Oplűsninger %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "<-- Delete"
-msgstr "<-- Slet"
+msgid "matching"
+msgstr "Samstemmende:"
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
#, c-format
-msgid "This will take a few minutes."
-msgstr "Dette vil tage nogle fć minutter."
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
+msgstr ""
+"Kunne ikke fć adgang til kernemoduler svarende til din kerne (fil %s "
+"mangler), dette betyder normalt at din opstartsdiskette ikke stemmer overens "
+"med installationsmediet (lav en nyere opstartsdiskette)"
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
-msgid "Build All Kernels -->"
-msgstr "Byg alle kerner -->"
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"Vælg den rigtige port. For eksempel er navnet for COM1-porten under MS "
+"Windows 'ttyS0' under GNU/Linux."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "No NIC selected!"
-msgstr "Ingen NIC valgt!"
+msgid "The following packages are going to be removed"
+msgstr "De fűlgende pakker vil blive afinstalleret"
-#: ../../standalone/drakTermServ:1
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
#, c-format
-msgid "Build Single NIC -->"
-msgstr "Byg enkel NIC -->"
+msgid "Connect to the Internet"
+msgstr "Lav forbindelse til Internettet"
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "No kernel selected!"
-msgstr "Ingen kerne valgt!"
+msgid "Use existing partitions"
+msgstr "Brug eksisterende partition"
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Build Whole Kernel -->"
-msgstr "Opbyg hele kernen -->"
+msgid "Canadian (Quebec)"
+msgstr "Canadisk (Québec)"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Boot ISO"
-msgstr "Start fra ISO"
+msgid "Mouse device: %s\n"
+msgstr "Muse-enhed: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Boot Floppy"
-msgstr "Start fra diskette"
+msgid "Reselect correct fonts"
+msgstr "Genvælg korrekte skrifttyper"
-#: ../../standalone/drakTermServ:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
-"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
+"Options Description:\n"
"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
"\n"
msgstr ""
-"drakTermServ-oversigt\n"
-"\t\t\t \n"
-" - Lav Etherboot-aktiverede opstartsaftryksfiler:\n"
-" \t\tFor at starte med en kerne via etherboot skal en speciel kerne/"
-"initrd-aftryksfil oprettes.\n"
-" \t\tmkinitrd-net laver meget af dette arbejde og drakTermServ er "
-"bare en grafisk grænseflade\n"
-" \t\tfor at hjælpe til med at hćndtere/ændre pć disse aftryksfiler.\n"
-"\n"
-" - Vedligeholdelse af /etc/dhcpd.conf:\n"
-" \t\tFor at starte klientene over netværk behűver hver klient en "
-"indgang i dhcpd.conf, som udleverer en IP-adresse\n"
-" \t\tog netværksopstart-aftryksfiler til maskinen. drakTermServ "
-"hjælper til med at lave/fjerne disse indgange.\n"
-"\t\t\t\n"
-" \t\t(PCI-kort kan undlade aftryksfilen - etherboot vil efterspűrge "
-"den rigtige aftryksfil. Du bűr\n"
-" \t\togsć bemærke at nćr etherboot ser efter aftryksfilerne forventer "
-"den navne som\n"
-" \t\tboot-3c59x.nbi, fremfor boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tEt typisk dhcpd.conf-afsnit for at understűtte disklűse klienter "
-"ser sćdan ud:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tMens du kan bruge en pűl af IP-adresser, fremfor at opsætte en "
-"specifik opsætningsindgang for\n"
-"\t\t\ten klientmaskine, vil brug af faste adresser lette\n"
-"brugen\n"
-"\t\t\taf klientspecifikke konfigurationsfiler som ClusterNFS tilbyder.\n"
-"\t\t\t\n"
-"\t\t\tBemærk: \"#type\"-indgangen er kun brugt af drakTermServ. Klienter "
-"kan enten være \"tynde\"\n"
-"\t\t\teller 'tykke'. Tynde klienter kűrer stűrsteparten af programmellet "
-"via xdmcp, mens tykke klienter kűrer stűrsteparten\n"
-"af programmellet pć klientmaskinen. En speciel inttab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ bliver\n"
-"\t\t\tskrevet for tynde klienter. Systemkonfigurationsfilerne xdm-config, "
-"kdmrc, og gdm.conf bliver ændrede\n"
-"\t\t\thvis tynde klienter bliver brugt, for at aktivere xdmcp. Idet der er "
-"sikkerhedsproblematik omkring brugen af xdmcp,\n"
-"\t\t\tsć bliver hosts.deny og hosts.allow ændret for at begrænse adgangen "
-"til det lokale subnet.\n"
-"\t\t\t\n"
-"\t\t\tBemærk: Du skal stoppe/starte serveren efter at have tilfűjet eller "
-"ændret klienter.\n"
-"\t\t\t\n"
-" - Vedligeholdelse af /etc/exports:\n"
-" \t\tClusternfs lader dig eksportere rod-filsystemet til disklűse "
-"klienter, drakTermServ\n"
-" \t\topsætter de rigtige indgange for at tillade anonym adgang til "
-"rod-filsystemet fra\n"
-" \t\tdisklűse klienter.\n"
-"\n"
-" \t\tEn typisk eksporterings-indgang for clusternfs er:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASKE(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tHvor SUBNET/MASKE bliver defineret for dit netværk.\n"
-" \t\t\n"
-" - Vedligeholdelse af /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor at brugere skal kunne logge ind pć systemet fra en disklűs "
-"klient, sć mć deres indgang i\n"
-" \t\t/etc/shadow kopieres ind i /etc/shadow\\$\\$CLIENTS\\$\\$. "
-"drakTermServ hjælper til\n"
-" \t\tved at tilfűje og slette brugere fra denne fil.\n"
-"\n"
-" - Per klient /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tVia clusternfs kan hver disklűs klient have deres egen unikke "
-"konfigurationsfil\n"
-" \t\tpć rod-filsystemet pć serveren. I fremtiden vil drakTermServ "
-"kunne hjælpe til med at lave disse\n"
-" \t\tfiler.\n"
-"\n"
-" - Per klient systemkonfigurationsfiler:\n"
-" \t\tVia clusternfs kan hver disklűs klient have deres egne unikke "
-"konfigurationsfiler\n"
-" \t\tpć rod-filesystemet pć serveren. I fremtiden vil drakTermServ "
-"kunne hjælpe til med at oprette disse filer\n"
-" \t\tsom feks. /etc/modules.conf, /etc/sysconfig/mouse, /etc/"
-"sysconfig/keyboard pć per klient\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ vil konfigurere denne fil til at virke sammen med "
-"aftryksfilerne som bliver oprettet af\n"
-" \t\tmkinitrd-net, og indgangene i /etc/dhcpd.conf, for at udlevere "
-"netværks-opstartsaftryksfilerne til hver \n"
-" \t\tdisklűs klient.\n"
-"\n"
-" \t\tEn typisk tftp-konfigurationsfil ser sćdan ud:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tÆndringen her fra den normale installation er ændringen af "
-"disable-flaget til\n"
-" \t\t'no' og ændring af filstien til /var/lib/tftpboot, hvor mkinitrd-"
-"net\n"
-" \t\tplacere sine aftryksfiler.\n"
+"beskrivelse af valgmuligheder:\n"
"\n"
-" - Opret etherboot-disketter/CD'er:\n"
-" \t\tDe disklűse klientmaskiner behűver enten ROM aftryksfiler pć "
-"netværkskortet, en opstartsdiskette\n"
-" \t\teller en CD for at initiere opstartssekvensen. drakTermServ vil "
-"hjælpe til med generere disse aftryksfiler,\n"
-" \t\tbaseret pć netværkskortet i klientmaskinen.\n"
-" \t\t\n"
-" \t\tEt basiseksempel pć oprettelse af en opstartsdiskette for 3Com "
-"3c509 manuelt:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Vær forsigtig nćr du bruger ftp-backup, fordi kun \n"
+"sikkerhedskopier som er opbygget allerede bliver sendt til serveren.\n"
+"Sć for űjeblikket skal du bygge sikkerhedskopien pć din disk \n"
+"fűr den sendes til ftp-serveren.\n"
"\n"
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"Options\n"
"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
+"Til sidst valgmulighederne\n"
"\n"
-"\n"
-" Tak til:\n"
-"\t- LTSP-projektet http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+"Hér kan du vælge om du űnsker automatisk at skifte til en grafisk "
+"grænseflade ved opstart. Selvfűlgelig vil du űnske at svare '%s', hvis din "
+"maskine skal bruges som server, eller hvis ikke lykkedes dig at fć skærmen "
+"konfigureret."
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
-msgstr ""
-"\n"
-"Ophavsret © 2002 MandrakeSoft\n"
-"Stew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
+msgid "We are now going to configure the %s connection."
+msgstr "Vi skal nu konfigurere opkoblingen '%s'."
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Add/Del Clients"
-msgstr "Tilfűj/slet klienter"
+msgid "MandrakeExpert Corporate"
+msgstr "MandrakeExpert for firmaer"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Add/Del Users"
-msgstr "Tilfűj/slet brugere"
+msgid ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
+msgstr ""
+" [everything]\n"
+" XFdrake [--noauto] skærm\n"
+" XFdrake oplűsning"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Write protection"
+msgstr "Auto-opdagelse af printere"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "You've not selected any font"
+msgstr "Kunne ikke finde nogen skrifttyper.\n"
+
+#: ../../steps.pm:1
#, c-format
-msgid "Net Boot Images"
-msgstr "Opstartsbilleder for netopstart"
+msgid "Language"
+msgstr "Vælg sprog"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "Etherboot diskette/ISO"
+msgid "Printer model selection"
+msgstr "Valg af printermodel"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Stop Server"
-msgstr "Stop server"
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
+msgstr ""
+"Efter type-ændring af partition %s vil alle data pć denne partition gć tabt"
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
#, c-format
-msgid "Start Server"
-msgstr "Start server"
+msgid "%d seconds"
+msgstr "%d sekunder"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Disable Server"
-msgstr "Deaktivér server"
+msgid "Insert a blank floppy in drive %s"
+msgstr "Indsæt en tom diskette i drev %s"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Enable Server"
-msgstr "Aktivér server"
+msgid "A valid URI must be entered!"
+msgstr "En korrekt URI skal opgives!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "Konfiguration af Mandrake Terminalserver"
+msgid "Found \"%s\" interface do you want to use it ?"
+msgstr "Fandt \"%s\" grænsesnit, űnsker du at bruge det?"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Remove the last item"
-msgstr "Fjern det sidste element"
+msgid "Re-configure interface and DHCP server"
+msgstr "Rekonfigurér grænsesnit og DHCP-server"
-#: ../../standalone/drakautoinst:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Add an item"
-msgstr "Tilfűj et element"
+msgid "Sound configuration"
+msgstr "Lyd-konfiguration"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Auto Install"
-msgstr "Autoinstallation"
+msgid "Photo test page"
+msgstr "Fototestside"
-#: ../../standalone/drakautoinst:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Disketten er blevet genereret.\n"
-"Du kan nu gennemfűre installationen igen."
+msgid "Custom disk partitioning"
+msgstr "Brugerdefineret disk-opdeling"
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congratulations!"
-msgstr "Tillykke!"
+msgid "Enter Printer Name and Comments"
+msgstr "Indtast printernavn og kommentarer"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"The following printers\n"
"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
+"De fűlgende printere\n"
"\n"
-"Velkommen.\n"
-"\n"
-"Parametrene for autokonfigurationen kan ses i afsnittene til venstre"
+"%s%s\n"
+"er direkte tilsluttet til dit system"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Creating auto install floppy"
-msgstr "Laver autoinstallations-diskette"
+msgid "type: %s"
+msgstr "type: %s"
-#: ../../standalone/drakautoinst:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "manual"
-msgstr "manuel"
+msgid "Slovakian (QWERTY)"
+msgstr "Slovakisk (QWERTY)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/draksound:1
#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Vælg for hvert skridt om det skal være som under installationen, eller "
-"manuelt"
+msgid "No Sound Card detected!"
+msgstr "Intet lydkort genkendt!"
-#: ../../standalone/drakautoinst:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Konfiguration af automatiske skridt"
+msgid "Mouse Port"
+msgstr "Muse-port"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "replay"
-msgstr "afspil igen"
+msgid ""
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
+msgstr ""
+"Skal genstarte Display Manager for at de fulde ændringer kan tage effekt. \n"
+"(service dm restart - fra konsollen)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Ftp Server"
+msgstr "FTP-server"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+"Arguments: (arg)\n"
"\n"
-"Do you want to continue?"
+"Enable/Disable msec hourly security check."
msgstr ""
-"Du er ved at konfigurere en automatisk installationsdiskette. Denne mulighed "
-"er lidt farlig, og mć bruges med forsigtighed.\n"
-"\n"
-"Med denne mulighed vil du igen kunne kűre installationen du gennemfűrte pć "
-"denne maskine, med muligheden for at selv kunne ændre pć nogen af "
-"indstillingerne.\n"
-"\n"
-"For maksimal sikkerhed vil partitioneringen og formateringen aldrig blive "
-"gennemfűrt automatisk, uanset hvad du valgte under installationen.\n"
+"Argumenter: (arg)\n"
"\n"
-"Űnsker du at fortsætte?"
+"Aktivér/deaktivér msec timevise sikkerhedskontrol."
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "Autoinstallationskonfigurering"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "%s fonts conversion"
+msgstr "Konvertering af pfm-skrifttyper"
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Jeg kan ikke finde filen '%s' som jeg behűver."
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the type of bus on which the mouse is connected"
+msgstr "Bustypen som musen er forbundet til"
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
#, c-format
-msgid "Error!"
-msgstr "Fejl!"
+msgid "Uganda"
+msgstr "Uganda"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (size)\n"
"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
+"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
+"Argumenter: (stűrrelse)\n"
"\n"
-"Problemer med genskabelse af sikkerhedskopier:\n"
-"\n"
-"I genskabelsestrinnet vil Drakbackup kontrollere alle dine\n"
-"backupfiler fűr genskabelse af dem.\n"
-"Fűr genskabelsen vil Drakbackup fjerne \n"
-"dit nuværende katalog, og alle dine data vil gć tabt.\n"
-"Det er vigtigt at være forsigtig og ikke ændre sikkerhedskopieringens\n"
-"datafiler i hćnden.\n"
+"Set shell commands history size. A value of -1 means unlimited."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"options description:\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
"\n"
-msgstr ""
-"beskrivelse af valgmuligheder:\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
"\n"
-"Vær forsigtig nćr du bruger ftp-backup, fordi kun \n"
-"sikkerhedskopier som er opbygget allerede bliver sendt til serveren.\n"
-"Sć for űjeblikket skal du bygge sikkerhedskopien pć din disk \n"
-"fűr den sendes til ftp-serveren.\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
"\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"Description:\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
+"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
+"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
msgstr ""
-"Beskrivelse:\n"
+"Som en opsummering vil DrakX give dig en oversigt over information\n"
+"som den har om dit system. Afhængig af installeret maskinel kan du have\n"
+"et eller flere af de fűlgende punkter. Hvert punkt bestćr af en overskrift\n"
+"fulgt af en kort opsummering af den nuværende konfiguration. Klik pć\n"
+"den tilsvarende \"%s\"-knap for at ændre pć opsætningen.\n"
"\n"
-" Drakbackup bruges til at lave sikkehedskopier af dit system.\n"
-" I konfigurationen kan du vælge: \n"
-"\t- Systemfiler, \n"
-"\t- Brugeres filer, \n"
-"\t- Andre filer.\n"
-"\teller Hele dit system ... eller Andet (sćsom Windows partitioner)\n"
+" * \"%s\": Tjek at din tastaturopsætning er korrekt og ændr om nűdvendigt.\n"
"\n"
-" Drakbackup lader dig tage sikkerhedskopier af dit system pć:\n"
-"\t- Ddisk.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (med autoboot, redning og autoinstallering.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Bćnd.\n"
+" * \"%s\": Tjek at du har valgt korrekt land. Hvis du ikke er i dette land,\n"
+"sć klik pć \"%s\"-knappen og vælg et andet land. Hvis dit land ikke er i\n"
+"listen, sć klik pć \"%s\"-knappen for at fć en fuldstændig liste.\n"
"\n"
-" Drakbackup lader dig genskabe dit system pć\n"
-" et katalog valgt af brugeren.\n"
+" ' \"%s\": DrakX bestemmer din tidszone ud fra hvilket land du har valgt.\n"
+"Du kan klikke pć \"%s\" her, hvis dette ikke er korrekt.\n"
"\n"
-" Som standard vil alle sikkerhedskopier blive lagret i dit\n"
-" /var/lib/drakbackup katalog\n"
+" * \"%s\" :Tjek museopsætningen og klik pć knappen for at ændre om "
+"nűdvendigt.\n"
"\n"
-" Konfigurationsfil:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+" * \"%s\": Ved at klikke pć \"%s\"-knappen ćbnes printeropsætnings-\n"
+"hjælperen. Konsultér det tilhűrende kapitel i opstartsguiden for mere\n"
+"information om hvordan en printer kan sættes op. Grænsefladen som er vist\n"
+"dér ligner den som benyttes under installationen.\n"
"\n"
-"Genskabelsestrin:\n"
-" \n"
-" I genskabelsestrinnet vil Drakbackup fjerne dit nuværende katalog \n"
-" og kontrollere at alle dine backupfiler ikke er űdelagte. Det \n"
-" anbefales at du laver en sidste sikkerhedskopiering fűr genskabelse.\n"
-" \n"
+" * '%s': Hvis et lydkort er blevet fundet pć dit system, vil det blive vist "
+"hér. Hvis du bemærker at det viste lydkort ikke er det som faktisk er til "
+"stede pć systemet, kan du klikke pć knappen og vælge en anden driver.\n"
+"\n"
+" * \"%s\": DrakX vil opsætte din grafiske grænseflade i oplűsning\n"
+"800x600 eller 1024x768. Hvis det ikke passer til dine behov, sć klik pć \"%s"
+"\"-\n"
+"knappen for at ændre pć opsætningen.\n"
+"\n"
+" * \"%s\": Hvis et TV-kort er fundet i din maskine, er det vist her. Hvis du "
+"har\n"
+"et TV-kort som ikke er fundet, sć klik \"%s\" for at sætte det op manuelt.\n"
+"\n"
+" * \"%s\": Hvis der er fundet et ISDN-kort, vil det vises her. Du kan klikke "
+"pć\n"
+"\"%s\" for at ændre pć parameterne til kortet.\n"
+"\n"
+" * \"%s\": Vælg dette for at ændre pć internetforbindelsen eller den lokale\n"
+"netværksopsætning.\n"
+"\n"
+" * \"%s\": Du kan her ændre pć sikkerhedsniveauet som er defineret "
+"tidligere.\n"
+"\n"
+" * \"%s\": Hvis du skal koble din maskine direkte til internet, er det en "
+"god idé\n"
+"at beskytte sig mod angreb med en brandmur. Begyndervejledningen har mere "
+"om\n"
+"dette.\n"
+"\n"
+" * \"%s\": Hvis du vil ændre pć konfigurationen for opstartsindlæseren,\n"
+"sć klik pć denne knap. Dette bűr forbeholdes avancerede brugere.\n"
"\n"
+" * \"%s\": Her kan du bestemme hvilke tjenester som skal startes pć din\n"
+"maskine. Hvis du skal bruge maskinen som server er det en god idé at "
+"kontrollere dette."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Comoros"
+msgstr "Comorerne"
+
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+"\n"
+"\n"
+"\n"
+"We are now going to configure the %s connection.\n"
+"\n"
+"\n"
+"Press OK to continue."
msgstr ""
-" opdateringer 2002 MandrakeSoft ved Stew Benedict <sbenedict\\@mandrakesoft."
-"com>"
+"\n"
+"\n"
+"\n"
+"Vi skal nu konfigurere opkoblingen '%s'.\n"
+"\n"
+"\n"
+"Tryk OK for at begynde."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Yaboot mode"
+msgstr "Yaboot modus"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
+msgstr "USA (kabel)"
+
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
-" Copyright (C) 2001-2002 MandrakeSoft ved DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Kan ikke genstarte LiLo!\n"
+"Start \"lilo\" som root pć kommandolinjen for at færdiggűre installationen "
+"af Lilo-tema."
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Standard 3-knaps mus"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Select another media to restore from"
+msgstr "Vælg et andet medie at genskabe fra"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Software Manager"
+msgstr "Programmeladministration"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"restore description:\n"
+"Restore Description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
@@ -14372,17 +13716,19 @@ msgid ""
"\n"
" - Incremental Backups:\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
msgstr ""
"beskrivelse af genskabelse:\n"
@@ -14407,4661 +13753,5355 @@ msgstr ""
"\n"
"\n"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-"beskrivelse af valgmuligheder:\n"
-"\n"
-" - Lav sikkerhedskopi af systemfiler:\n"
-" \n"
-"\tDenne mulighed lader dig sikkerhedskopiere dit /etc katalog,\n"
-"\tsom indeholder alle konfigurationsfiler. Vær \n"
-"\tforsigtig pć genskabelsestrinnet med ikke at overskrive:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Lav sikkerhedskopi af brugerfiler: \n"
-"\n"
-"\tDenne mulighed lader dig vælge alle de brugere som du vil lave\n"
-"\tsikkerhedskopier for.\n"
-"\tFor at spare pć diskplads anbefales du ikke medtager netlæseres\n"
-"\tcache.\n"
-"\n"
-" - Lav sikkerhedskopi af andre filer: \n"
-"\n"
-"\tDenne mulighed lader dig tilfűje mere data som skal gemmes.\n"
-"\tMed denne sikkerhedskopieringsmćde er det ikke muligt i űjeblikket \n"
-"\tat vælge inkrementalbackup.\t\t\n"
-" \n"
-" - Inkrementalbackupper:\n"
-"\n"
-"\tInkrementalbackup er den stærkeste valgmulighed for \n"
-"\tsikkerhedskopiering. Denne mulighed lader dig sikkerhedskopiere \n"
-"\talle dine data den fűrste gang, og derefter kun de ændrede data.\n"
-"\tSć vil du i genskabelsestrinnet kunne genskabe dine data fra en \n"
-"\tangivet dato.\n"
-"\tHvis du ikke har valgt denne mulighed vil alle gamle\n"
-"\tsikkerhedskopier blive slettet fűr hver sikkerhedskopiering. \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Nogle fejl under sendmail kommer fra \n"
-" en dćrlig konfiguration af postfix. For at lűse dette skal du\n"
-" sætte myhostname eller mydomain i /etc/postfix/main.cf\n"
-"\n"
+msgid "Re-submit"
+msgstr "Indsend igen"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-"beskrivelse af valgmuligheder:\n"
-"\n"
-" Pć dette trin vil Drakbackup lade dig ændre:\n"
-"\n"
-" - Komprimeringsmćden:\n"
-" \n"
-" Hvis du markerer bzip2-komprimering, vil du komprimere\n"
-" dine data bedre end gzip (omkring 2-10 %%).\n"
-" Denne valgmulighed er ikke markeret som standard fordi\n"
-" denne komprimeringsmćde kræver mere tid (omkring 1000%% mere).\n"
-" \n"
-" - Opdateringsmćden:\n"
-"\n"
-" Denne valgmulighed vil opdatere din backup, men denne\n"
-" valgmulighed er ikke rigtigt nyttig fordi du skal\n"
-" dekomprimere din backup fűr du kan opdatere den.\n"
-" \n"
-" - Mćden for .backupignore:\n"
-"\n"
-" som med cvs vil Drakbackup ignorere alle referencer\n"
-" indeholdt i .backupignore-filer i hvert katalog.\n"
-" fx: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
+msgid "CD in place - continue."
+msgstr "Cd'en er pć plads - fortsæt."
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Drakbackup"
-msgstr "Drakbackup"
+msgid "KB"
+msgstr "Kb"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restore"
-msgstr "Genskab"
+msgid "Network & Internet"
+msgstr "Netværk og Internet"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup Now"
-msgstr "Lav sikkerhedskopiering nu"
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Litauisk \"fonetisk\" QWERTY"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Advanced Configuration"
-msgstr "Avanceret konfiguration"
+msgid "Net Boot Images"
+msgstr "Opstartsbilleder for netopstart"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Wizard Configuration"
-msgstr "Konfiguration med vejleder"
+msgid "Sharing of local scanners"
+msgstr "Deling af lokale skannere"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "View Backup Configuration."
-msgstr "Se konfiguration af sikkerhedskopiering."
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr ""
+"Undersűgning for Plug'n Play mislykkedes. Vælg venligst den rigtige skærm"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Backup Now from configuration file"
-msgstr "Lav sikkerhedskopi nu ud fra konfigurationsfil"
+msgid "Services and deamons"
+msgstr "Tjenester og dæmoner"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Drakbackup Configuration"
-msgstr "Drakbackup konfiguration"
+msgid "Remote host name missing!"
+msgstr "Eksternt værtsnavn mangler"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Total Progress"
-msgstr "Total fremdrift"
+msgid "with /usr"
+msgstr "med /usr"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sending files..."
-msgstr "Sender filer..."
+msgid "Network"
+msgstr "Netværk"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "files sending by FTP"
-msgstr "Filer sendes via FTP"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgstr ""
+"Auto-opdagelse af printere tilsluttet maskiner der kűre Microsoft Windows"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup other files"
-msgstr "Lav sikkerhedskopi af andre filer"
+msgid "This password is too simple"
+msgstr "Adgangskoden er for simpel"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup user files"
-msgstr "Lav sikkerhedskopi af brugerfiler"
+msgid "Slovakian (QWERTZ)"
+msgstr "Slovakisk (QWERTZ)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "Backup system files"
-msgstr "Lav sikkerhedskopi af systemfiler"
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
+"At ændre og oprette i forskellige sprog som Perl, Python, C og C++ har "
+"aldrig fűr været sć nemt, takket være GNU gcc 3 og de bedste "
+"udviklingsmiljűer baseret pć ćben kildekode."
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Under Devel ... please wait."
-msgstr "Under udvikling ... vent venligst:-)"
+msgid "Truly minimal install (especially no urpmi)"
+msgstr "Virkelig minimal installation (specielt ingen urpmi)"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+" Transfer \n"
+"Now"
msgstr ""
-"ingen konfigurationsfil fundet \n"
-"klik pć Vejleder eller Avanceret."
+" Overfűr \n"
+"Nu"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please select data to backup..."
-msgstr "Vælg data for sikkerhedskopi..."
+msgid "Use daemon"
+msgstr "Brug dæmon"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
#, c-format
-msgid "Please select media for backup..."
-msgstr "Vælg medie for sikkerhedskopi..."
+msgid "Authentication"
+msgstr "Identifikation"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please select data to restore..."
-msgstr "Udvælg de data du vil genskabe..."
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Tilfűj denne printer til Star Office/OpenOffice.org/GIMP.org"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "De fűlgende pakker behűver at blive installeret\n"
+msgid "Additional CUPS servers: "
+msgstr "Yderligere CUPS-servere: "
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
-"Fejl ved sending af fil via FTP.\n"
-" Ret venligst din FTP-konfiguration."
+"Vælg en af de fundne printere fra listen eller angiv værtsnavnet eller IP-"
+"adressen og eventuelt portnummer (standard er 9100) i indtastningsfelterne."
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount %s?"
+msgstr "Hvor űnsker du at montere %s?"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Restore Via Network"
+msgstr "Genskab via netværk"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Algeria"
+msgstr "Algeriet"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd-size"
+msgstr "Initrd-stűrrelse"
+
+#: ../../help.pm:1
+#, c-format
msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
-"Fejl ved sendmail.\n"
-" Din rapport blev ikke sendt.\n"
-" Konfigurér venligst sendmail"
+"I tilfælde af at forskellige servere er tilgængelige til dit kort, med eller "
+"uden 3D-accelleration, bliver du foreslćet at vælge den server der bedst "
+"opfylder dine behov."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Next"
-msgstr "Næste"
+msgid "\tBackups use tar and gzip\n"
+msgstr "\tSikkerhedskopiering bruger tar og gzip\n"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Previous"
-msgstr "Forrige"
+msgid "2 MB"
+msgstr "2 Mb"
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Save"
-msgstr "Gem"
+msgid ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
+"[OPTION]...\n"
+" --no-confirmation spűrg ikke det fűrste bekræftelsesspűrgsmćl i "
+"MandrakeUpdate-tilstand\n"
+" --no-verify-rpm efterprűv ikke pakke-signaturer\n"
+" --changelog-first vís changelog fűr filliste i beskrivelsesvinduet\n"
+" --merge-all-rpmnew foreslć at flette alle .rpmnew/.rpmsave filer fundet"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build Backup"
-msgstr "Opbyg sikkerhedskopien"
+msgid "Setting Default Printer..."
+msgstr "Sætter standard printer..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Restore Progress"
-msgstr "Fremskridt for genskabelse"
+msgid "Interface %s (using module %s)"
+msgstr "Grænseflade %s (benytter modul %s)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Restore From Catalog"
-msgstr "Genskab fra katalog"
+msgid "Name: %s\n"
+msgstr "Navn: %s\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Browse to new restore repository."
-msgstr "Bladr til nyt genskabelseslager."
+msgid "Generating preview ..."
+msgstr "Genererer smugkig ..."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "CD in place - continue."
-msgstr "Cd'en er pć plads - fortsæt."
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
+msgstr ""
+"Frek bűr have endelsen k, M or G (for eksempel, \"2.46G\" for 2.46 GHz "
+"frekvens), eller tilfűj nok '0'."
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Custom Restore"
-msgstr "Tilpasset genskabelse"
+msgid "serial"
+msgstr "seriel"
-#: ../../standalone/drakbackup:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Restore all backups"
-msgstr "Genskab alle sikkerhedskopier"
+msgid "DVD-ROM"
+msgstr "DVD-ROM"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Failed..."
-msgstr "Genskabelse mislykkedes..."
+msgid "Georgian (\"Latin\" layout)"
+msgstr "Georgisk (Latin layout)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Files Restored..."
-msgstr "Filer genskabte..."
+msgid "Get the best items with Mandrake Linux Strategic partners"
+msgstr "Fć fat i de bedste sager fra Mandrake Linux strategiske partnere"
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Path or Module required"
-msgstr "Sti eller modul krævet"
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
+msgstr ""
+"Du kan nu angive parametre til modul %s.\n"
+"Bemærk at alle adresser bűr indtastes med foranstillet 0x, fx '0x123'"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Hostname required"
-msgstr "Værtsnavn krævet"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
+msgstr ""
+"Mandrake Linux 9.1 indeholder Mandrake Kontrolcenter, et stærkt værktűj til "
+"at tilpasse din maskine fullstændigt til den brug du har behov for. "
+"Konfigurér og tilpas elementer som sikkerhedsniveau, tilbehűr (skærm, mus, "
+"tastatur), internetforbindelse og meget mere!"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Username required"
-msgstr "Brugernavn krævet"
+msgid "Kenya"
+msgstr "Kenya"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Password required"
-msgstr "Adgangskode krævet"
+msgid "Use ``Unmount'' first"
+msgstr "Benyt ``Afmontér'' fűrst"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Host Path or Module"
-msgstr "Stil til vært eller modul"
+msgid "Installing mtools packages..."
+msgstr "Installerer mtools-pakker..."
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Host Name"
-msgstr "Værtsnavn"
+msgid "You must specify a root partition"
+msgstr "Du skal angive en root-partition"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr "Genskab via netværksprotokol: %s"
+msgid "first step creation"
+msgstr "opretter fűrste trin"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Via Network"
-msgstr "Genskab via netværk"
+msgid "Both Shift keys simultaneously"
+msgstr "Begge taster samtidigt"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr "Ikke korrekt bćndetiket. Bćndet har etiket %s."
+msgid "Select a scanner model"
+msgstr "Vælg en skannermodel"
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-"Indsæt bćndet med volumeetiket %s\n"
-" i bćndenheden %s"
+msgid "LPRng - LPR New Generation"
+msgstr "LPRng - LPR New Generation"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore From Tape"
-msgstr "Genskab fra bćnd"
+msgid "Drakbackup Configuration"
+msgstr "Drakbackup konfiguration"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr "Ikke korrekt cd-etiket. Cd'en har etiket %s."
+msgid "Save as.."
+msgstr "Gem som..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
msgstr ""
-"Indsæt cd'en med volumetiket %s\n"
-" i cd-enheden monteret pć /mnt/cdrom"
+"Dette grænsesnit er ikke blevet konfigureret endnu.\n"
+"Start konfigurationsvejlederen i hovedvinduet"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore From CD"
-msgstr "Genskab fra cd"
+msgid "Korea (North)"
+msgstr "Korea (Nord)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup files not found at %s."
-msgstr "Sikkerhedskopier fandtes ikke pć %s."
+msgid "Autologin"
+msgstr "Autologin"
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Change\n"
-"Restore Path"
-msgstr ""
-"Ændr\n"
-"Genskabelsessti"
+msgid "System configuration"
+msgstr "Systemkonfiguration"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Domain Admin Password"
+msgstr "Adgangskode for domæneadministrator"
+
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Files"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
msgstr ""
-"Genskab valgte\n"
-"filer"
+"Perfekt tilpasning af din maskine takket være de 11 Mandrake Linux-"
+"brugergrænseflader hvor alt kan tilpasses: KDE 3.1, Gnome 2.2, Window "
+"Maker..."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Configuring printer ..."
+msgstr "Konfigurerer printer ..."
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
-"Genskab valgt\n"
-"katalogpost"
+"For at sikre dataintegritet efter ændring af stűrrelse pć partitioner \n"
+"vil filsystemtjek blive kűrt ved din næste opstart af Windows(TM)"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Remove user directories before restore."
-msgstr "Fjern brugerkataloger fűr genskabning."
+msgid "MB"
+msgstr "Mb"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Lav ny sikkerhedskopi fűr genskabning (kun for inkrementalbackupper)."
+msgid "if set to yes, run some checks against the rpm database."
+msgstr "hvis sat til ja, sć kűr nogle tjek pć rpm-databasen."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "select path to restore (instead of /)"
-msgstr "vælg sti at genskabe (i stedet for /)"
+msgid "Virgin Islands (British)"
+msgstr "Jomfruűerne (britiske)"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore Other"
-msgstr "Genskab andet"
+msgid "Bermuda"
+msgstr "Bermuda"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Restore Users"
-msgstr "Genskab brugere"
+msgid "click here if you are sure."
+msgstr "Klik her hvis du er sikker."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore system"
-msgstr "Genskab system"
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
+msgstr ""
+"ingen konfigurationsfil fundet \n"
+"klik pć Vejleder eller Avanceret."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
-msgid "Other Media"
-msgstr "Andet medie"
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"Her er listet de eksisterende Linux-partitioner genkendt pć din disk. Du kan "
+"beholde valgene gjort af vejlederen, de er velegnede til almindelig brug. "
+"Hvis du ændrer disse valg skal du i det mindste definere en rod-partition "
+"'/'. Lad være med at vælge en for lille partition, ellers vil du ikke kunne "
+"installere nok programmel. Hvis du űnsker at lagre data pć en separat "
+"partition, skal du ogsć vælge en '/home' (kun muligt hvis du har mere end én "
+"Linux-partition). \n"
+"Hver partition er listet som fűlger: 'Navn', 'Kapacitet'.\n"
+"\n"
+"'Navn' er kodet som fűlger: 'drevtype', 'drevnummer', "
+"'partitionsnummer' (for eksempel '/hda1').\n"
+"\n"
+"'drevtype' er 'hd' hvis dit diskdrev er et IDE drev, og 'sd' hvis det er et "
+"SCSI drev.\n"
+"\n"
+"'drevnummer' er altid et bogstav efter 'hd' eller 'sd'. For IDE drev:\n"
+"\n"
+" * 'a' betyder 'hoved-drev pć den primære IDE controller',\n"
+"\n"
+" * 'b' betyder 'slave-drev pć den primære IDE controller',\n"
+"\n"
+" * 'c' betyder 'hoved-drev pć den sækundære IDE controller',\n"
+"\n"
+" * 'd' betyder 'slave-drev pć den sækundære IDE controller'.\n"
+"\n"
+"For SCSI drev betyder 'a' det 'fűrste drev', 'b' betyder det 'andet drev', "
+"osv."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Select another media to restore from"
-msgstr "Vælg et andet medie at genskabe fra"
+msgid "Remove"
+msgstr "Fjern"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the directory where backups are stored"
-msgstr "Indtast kataloget hvor sikkerhedskopier gemmes"
+msgid "Lesotho"
+msgstr "Lesotho"
-#: ../../standalone/drakbackup:1
+#: ../../ugtk2.pm:1
#, c-format
-msgid "Restore from Hard Disk."
-msgstr "Genskab fra disk."
+msgid "utopia 25"
+msgstr "utopia 25"
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Use quota for backup files."
-msgstr "Brug kvoter for sikkerhedskopieringsfiler"
+msgid "Pipe job into a command"
+msgstr "kanalisér opgave ind i kommando"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Indtast den maksimale stűrrelse\n"
-" tilladt for Drakbackup"
+msgid "new dynamic device name generated by core kernel devfs"
+msgstr "Nyt dynamisk enhedsnavn genereret af den kűrende kernes devfs"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Please enter the directory to save:"
-msgstr "Indtast kataloget der skal gemmes:"
+msgid "Yes"
+msgstr "Ja"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use Hard Disk to backup"
-msgstr "Brug disk til sikkerhedskopiering"
+msgid "Cote d'Ivoire"
+msgstr "Elfenbenskysten"
-#: ../../standalone/drakbackup:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "please choose the date to restore"
-msgstr "Vælg dato for genskabning"
+msgid "Which protocol do you want to use?"
+msgstr "Hvilken protokol űnsker du at bruge?"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup the system files before:"
-msgstr "Lav sikkerhedskopi af systemfiler fűr:"
+msgid "Restore Progress"
+msgstr "Fremskridt for genskabelse"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr "Brugerliste at genskabe (kun den nyeste dato per bruger er vigtig)"
+msgid "Estonia"
+msgstr "Estland"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "OK to restore the other files."
-msgstr "O.k. at genskabe de andre filer."
+msgid "Choose the host on which the local scanners should be made available:"
+msgstr "Vælg værten pć hvilken de lokale skannere skal gűres tilgængelige: "
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
#, c-format
-msgid " Restore Configuration "
-msgstr " Genskab konfiguration "
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
+msgstr ""
+"Du har plads tilovers i din partitionstabel, men jeg kan ikke udnytte den.\n"
+"Den eneste lűsning er at flytte dine primære partitioner, sćledes at\n"
+"\"hullet\" bliver placeret ved siden af de udvidede partitioner."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " Successfuly Restored on %s "
-msgstr " genskabt uden fejl pć %s "
+msgid "Channel"
+msgstr "Kanal"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid " All of your selected data have been "
-msgstr " Alle dine valgte data er blevet "
+msgid "Add"
+msgstr "Tilfűj"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Backup files are corrupted"
-msgstr "Sikkerhedskopifiler er űdelagte"
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "Deling af Internetforbindelse har aldrig været konfigureret."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Afmarkér eller fjern det gerne næste gang."
+msgid " Error while sending mail. \n"
+msgstr " Fejl ved afsendelse af post. \n"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
+#, c-format
+msgid "Keyboard"
+msgstr "Tastatur"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"List of data corrupted:\n"
-"\n"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-"Liste over data der er űdelagt:\n"
-"\n"
+"Indsæt cd'en med volumetiket %s\n"
+" i cd-enheden monteret pć /mnt/cdrom"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"List of data to restore:\n"
-"\n"
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
msgstr ""
-"Liste over data som skal genskabes:\n"
-"\n"
+"Hastighed bűr have endelsen k, M or G (for eksempel, \"11M\" for 11M), eller "
+"tilfűj nok '0'."
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Ingen konfiguration, klik pć Vejleder eller Avanceret.\n"
+msgid "Choose the connection you want to configure"
+msgstr "Vælg den opkobling, du űnsker at konfigurere"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "\t-Network by webdav.\n"
-msgstr "\t-Netværk via webdav.\n"
+msgid "Please wait, setting security level..."
+msgstr "Vent venligst, sætter sikkerhedsniveau..."
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t-Netværk via rsync.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
+msgstr "Mandrake Linux 9.1 er den ultimative udviklingsplatform."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Netværk via SSH.\n"
+msgid "Configuring network device %s"
+msgstr "Konfigurerer netværksenheden %s"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Netværk via FTP.\n"
+msgid "activated"
+msgstr "aktiveret"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "\t-Tape \n"
-msgstr "\t-Tape \n"
+msgid "Please choose which network interface will be used for the dhcp server."
+msgstr "Vælg hvilken netværksgrænseflade som skal bruges til dhcp-serveren."
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-CDROM.\n"
-msgstr "\t-cdrom.\n"
+msgid "Finding packages to upgrade..."
+msgstr "Leder efter pakker som skal opgraderes"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t-Diskdrev.\n"
+msgid "Mount point: "
+msgstr "Monteringssti: "
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
-msgstr ""
-"\n"
-"- Dæmon (%s) indeholder:\n"
+msgid "parse all fonts"
+msgstr "fortolk alle skrifttyper"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tSikkerhedskopiering bruger tar og gzip\n"
+msgid "With X"
+msgstr "Med X"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tSikkerhedskopiering bruger tar og bzip2\n"
+msgid "Multi-head configuration"
+msgstr "Flerskærms-konfiguration"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "\tDo not include System Files\n"
-msgstr "\tMedtag ikke systemfiler\n"
+msgid "No browser available! Please install one"
+msgstr "Ingen netlæser til stede! Installér venligst én"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
"\n"
-"- Options:\n"
+"%s"
msgstr ""
+"Behold ændringer?\n"
+"Nuværende konfiguration er:\n"
"\n"
-"- Muligheder:\n"
+"%s"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t brugernavn: %s\n"
-"\t\t pć sti: %s \n"
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "Du kan ikke bruge ReiserFS pć partitioner mindre end 32Mb"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"- Save via %s on host: %s\n"
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
-"\n"
-"- Gem via %s pć vært: %s\n"
+"rwho protokollen tillader eksterne brugere at hente en liste over alle "
+"brugere der er logget ind pć en maskine, der kűrer rwho dæmonen (minder om "
+"finger)."
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "\t\tErase=%s"
-msgstr "\t\tErase=%s"
+msgid "Domain name"
+msgstr "Domænenavn"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-"\n"
-"- Gem pć bćnd pć enhed: %s"
+msgid "Sharing of local printers"
+msgstr "Deling af lokale printere"
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
#, c-format
-msgid " (multi-session)"
-msgstr " (multi-session)"
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgstr "http://www.mandrakelinux.com/en/91errata.php3"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on device: %s"
-msgstr " pć enhed: %s"
+msgid "Available printers"
+msgstr "Tilgængelige printer"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "RW"
-msgstr "RW"
+msgid "Empty"
+msgstr "Tom"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
-"- Burn to CD"
-msgstr ""
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
"\n"
-"- Brænd pć CD"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
"\n"
-"- Slet tar-filer pć disken efter sikkerhedskopiering.\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
"\n"
-"- Gem til diskdrev pć stien: %s\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+"Monitor\n"
"\n"
-"- Other Files:\n"
-msgstr ""
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
"\n"
-"- Andre filer:\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- User Files:\n"
+"\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
+"X (for X Window System) er hjertet af GNU/Linux' grafiske grænseflade som "
+"alle de grafiske miljűer (KDE, GNOME, AfterStep, WindowMaker, mv.) der "
+"kommer sammen med Mandrake Linux afhænger af.\n"
"\n"
-"- Brugerfiler:\n"
+"Du vil blive vist en liste med forskellige parametre der kan ændres for at "
+"fć den bedst mulige grafiske fremvisning:\n"
+"\n"
+"Grafikkort\n"
+"\n"
+" Installationsprogrammet vil normalt automatisk finde ud af at konfigurere "
+"grafikkortet installeret pć din maskine. Hvis dette ikke er tilfældet kan du "
+"fra denne liste vælge det kort du faktisk har installeret.\n"
+" I tilfælde af at forskellige drivere er tilgængelige til dit kort, med "
+"eller uden 3D-accelleration, bliver du spurgt om at vælge den server der "
+"bedst opfylder dine behov.\n"
+"\n"
+"\n"
+"Skærm\n"
+"\n"
+" Installationsprogrammet vil normalt automatisk finde ud af at konfigurere "
+"skærmen tilsluttet din maskine. Hvis dette ikke er den rigtige, kan du fra "
+"denne liste vælge den skærm du faktisk har tilsluttet din maskine.\n"
+"\n"
+"\n"
+"Oplűsning\n"
+"\n"
+" Du kan vælge oplűsninger og farvedybder fra de tilgængelige muligheder "
+"for dit udstyr. Vælg dem som bedst opfylder dine behov (du vil dog kunne "
+"ændre dette efter installationen). Et eksempel pć den valgte konfiguration "
+"vil blive vist pć skærmen.\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" Systemet vil prűve at ćbne en grafisk skærm i den űnskede oplűsning. Hvis "
+"du kan se beskeden under afprűvningen og svarer '%s', sć vil DrakX gć videre "
+"til næste trin. Hvis du ikke kan se beskeden, betyder det at en del af den "
+"automatisk fundne konfiguration var forkert og testen vil automatisk slutte "
+"efter 12 sekunder, og bringe dig tilbage til menuen. Ændr indstillingerne "
+"til du fćr en korrekt grafisk fremvisning.\n"
+"\n"
+"\n"
+"\n"
+"Valgmuligheder\n"
+"\n"
+" Du kan hér vælge om du űnsker at din maskine automatisk skal skifte til "
+"en grafisk grænseflade ved opstart. Selvfűlgelig vil du űnske at svare Nej, "
+"hvis din maskine skal bruges som server, eller hvis ikke lykkedes dig at fć "
+"skærmen konfigureret. You can here choose whether you want to have your "
+"machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "text width"
+msgstr "tekstbredde"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount device %s?"
+msgstr "Hvor űnsker du at montere partitionen %s?"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The default lease (in seconds)"
+msgstr "Normal udlejningsperiode (i sekunder)"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Interface \"%s\""
+msgstr "Grænseflade '%s'"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "With basic documentation (recommended!)"
+msgstr "Med basal dokumentation (anbefalet!)"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "1 button"
+msgstr "1 knap"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"- System Files:\n"
+"There are %d unknown printers directly connected to your system"
msgstr ""
"\n"
-"- Systemfiler:\n"
+"Der findes %d ukendte printere direkte tilsluttet til dit system"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
+#, c-format
+msgid "Test"
+msgstr "Afprűv"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"Backup Sources: \n"
+"Allow/Forbid direct root login."
msgstr ""
+"Argumenter: (arg)\n"
"\n"
-"Kilder for sikkerhedskopi: \n"
+"Tillad/forbyd direkte root-logind."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select user manually"
-msgstr "Hćndpluk bruger"
+msgid "Korea"
+msgstr "Korea"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Backup Users"
-msgstr "Lav sikkerhedskopi af brugere"
+msgid "Your choice? (default `%s'%s) "
+msgstr "Dit valg? (standard '%s'%s) "
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Backup system"
-msgstr "Lav sikkerhedskopi af system"
+msgid "Raw printer"
+msgstr "Rć printer"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "Vælg hvad du vil sikkerhedkopiere"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "official vendor name of the cpu"
+msgstr "Officielt producentnavn pć processoren"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "on Tape Device"
-msgstr "pć bćndenhed"
+msgid "Vendor"
+msgstr "Producent"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "on CDROM"
-msgstr "pć cd-rom"
+msgid "Interface %s"
+msgstr "Grænseflade %s"
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "across Network"
-msgstr "over netværk"
+msgid "Configure mouse"
+msgstr "Konfigurér mus"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "on Hard Drive"
-msgstr "pć diskdrev"
+msgid "Choose the mount points"
+msgstr "Vælg monterings-stierne"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Please choose where you want to backup"
-msgstr "Vælg hvor du űnsker at sikkerhedskopiere"
+msgid "OK"
+msgstr "O.k."
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "More Options"
-msgstr "Flere muligheder"
+msgid "Yugoslavian (latin)"
+msgstr "Jugoslavisk (latinsk)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "When"
-msgstr "Hvornćr"
+msgid "Installing"
+msgstr "Installerer"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Where"
-msgstr "Hvor"
+msgid "Launch userdrake"
+msgstr "Start userdrake"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "What"
-msgstr "Hvad"
+msgid "Is this an install or an upgrade?"
+msgstr "Er dette en nyinstallation eller en opgradering?"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr "Slet tar-filer pć disken efter sikkerhedskopiering til andet medie."
+msgid "ISDN card"
+msgstr "ISDN-kort"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Send mail report after each backup to:"
-msgstr "Send epost-rapport efter hver sikkerhedskopiering til:"
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
+msgstr ""
+"For at dele din viden og hjælpe med at bygge Linux-værktűjer kan du være med "
+"i diskussionsfora som du finder pć vores 'Samfunds'-netsider."
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
"\n"
-"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-"Forsikr dig gerne om at cron-dæmonen er med i dine tjenester.\n"
-"Bemærk at alle 'net'-medier ogsć bruger disken for nærværende."
+"Tillykke, netværks- og internetkonfigurationen er færdig.\n"
+"Konfigurationen vil nu blive anvendt pć dit system.\n"
+"\n"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Vælg mediet for\n"
-"sikkerhedskopiering."
+msgid "\t-Hard drive.\n"
+msgstr "\t-Diskdrev.\n"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Please choose the time \n"
-"interval between each backup"
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
+"\n"
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
-"Vælg tidsinterval mellem\n"
-"hver sikkerhedskopiering"
+"Dette trin bliver kun aktiveret hvis der bliver fundet en eksisterende\n"
+"GNU/Linux partition pć din maskine.\n"
+"\n"
+"DrakX skal vide om du vil udfűre en ny installation eller en opgradering\n"
+"af et eksisterende Mandrake Linux-system.\n"
+"\n"
+" * \"%s\": Dette vil stort sét slette hele det gamle system. Hvis du\n"
+"űnsker at ændre hvordan diskene bliver partitioneret, eller ændre pć\n"
+"filsystemene, bűr du vælge dette. Afhængigt af hvordan du partitionerer kan\n"
+"nogen af de gamle data eventuelt beholdes. \n"
+"\n"
+" * \"%s\": Denne installationsklasse lader dig opgradere pakkene som\n"
+"er installeret pć dit nuværende Mandrake Linux-system. Dine nuværende\n"
+"partitioner og brugerdata bliver ikke berűrt. De fleste andre "
+"konfigurationstrin\n"
+"forbliver tilgængelige, i lighed med en standardinstallation.\n"
+"\n"
+"\"Opgradér\"-valget bűr fungere pć Mandrake Linux-systemer som kűrer\n"
+"version 8.1 eller nyere. Opgradering af versioner tidligere end 8.1 er ikke\n"
+"anbefalet. "
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Use daemon"
-msgstr "Brug dæmon"
+msgid "Printer on remote CUPS server"
+msgstr "Printer pć ekstern CUPS server"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "monthly"
-msgstr "mćnedligt"
+msgid ""
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"Kunne ikke fjerne printeren \"%s\" fra Star Office/OpenOffice.org/GIMP.org."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "weekly"
-msgstr "ugentligt"
+msgid "delete"
+msgstr "slet"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "daily"
-msgstr "dagligt"
+msgid "here if no."
+msgstr "Her hvis ikke."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "hourly"
-msgstr "timeligt"
+msgid "DHCP host name"
+msgstr "DHCP-værtsnavn"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "HardDrive / NFS"
-msgstr "Diskdrev / NFS"
+msgid "The maximum lease (in seconds)"
+msgstr "Stűrste udlejningsperiode (i sekunder)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "Vælg hvilken seriel port din mus er forbundet til."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please enter the directory to save to:"
-msgstr "Indtast kataloget hvortil der skal gemmes:"
+msgid "Did it work properly?"
+msgstr "Fungerer det korrekt?"
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr "Markér om du vil udskyde dit bćnd fűr sikkerhedskopi laves"
+msgid "Poor"
+msgstr "Ringe"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr "Markér om du vil slette dit bćnd fűr sikkerhedskopi laves"
+msgid "The DHCP start range"
+msgstr "Begyndelsen pć DHCP-omrćdet"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "Markér om du vil bruge den ikke-tilbagespolende enhed."
+msgid "Grenada"
+msgstr "Grenada"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Please enter the device name to use for backup"
-msgstr "Indtast endhedsnavnet der skal bruges til sikkerhedskopiering"
+msgid "Unsafe"
+msgstr "Usikker"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Use tape to backup"
-msgstr "brug bćnd til sikkerhedskopieringen"
+msgid ", %s sectors"
+msgstr ", %s sektorer"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "No CD device defined!"
-msgstr "Ingen cd-enhed defineret!"
+msgid "No"
+msgstr "Nej"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
msgstr ""
-"Indtast din CD-brænders enhedsnavn\n"
-" fx: 0,1,0"
+"Er din printer en multi-funktionenhed fra HP eller Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 med skanner, Sony IJP-V100), en HP "
+"PhotoSmart eller en HP LaserJet 2200?"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "Markér om du bruger en DVDRAM-enhed"
+msgid "Guadeloupe"
+msgstr "Guadeloupe"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "Markér om du bruger en CDRW-enhed"
+msgid "could not find any font.\n"
+msgstr "Kunne ikke finde nogen skrifttyper.\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid " Erase Now "
-msgstr " Slet nu "
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "Vil du have at Bak-tasten giver Delete i konsollen?"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "Markér om du vil slette dit CDRW-medie (1. session"
+msgid "Vertical refresh rate"
+msgstr "Lodret opdateringsfrekvens"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
#, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "Markér om du bruger et CDRW-medie"
+msgid "Entering step `%s'\n"
+msgstr "Gćr til trin `%s'\n"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please check for multisession CD"
-msgstr "Markér om du bruger en multisessions-cd"
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "Vælg cd/dvd-mediastűrrelse"
+msgid "Removing %s ..."
+msgstr "Fjerner %s ..."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
-msgstr ""
-"Vælg cd/dvd-enhed.\n"
-"(Tryk Enter for at overfűre indstillinger til andre felter.\n"
-"Dette felt behűves ikke, det er kun et værktűj for at udfylde formularen.)"
+msgid "Niger"
+msgstr "Niger"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use CD/DVDROM to backup"
-msgstr "Brug CD/DVDROM til sikkerhedskopiering"
+msgid "No printer"
+msgstr "Ingen printer"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Need hostname, username and password!"
-msgstr "Behűver værtsnavn, brugernavn og adgangskode!"
+msgid "alert configuration"
+msgstr "advarsels-konfiguration"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remember this password"
-msgstr "Husk denne adgangskode"
+msgid "NetWare Printer Options"
+msgstr "NetWare printer-parametre"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Please enter your password"
-msgstr "Indtast din adgangskode"
+msgid "%s BootSplash (%s) preview"
+msgstr "%s smugkig af opstartsskærm (%s)"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Please enter your login"
-msgstr "Indtast dit brugernavn"
+msgid "General"
+msgstr "Generelt"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
-msgstr ""
-"Indtast kataloget (eller modulet) hvori\n"
-" sikkerhedskopien skal lægges pć denne maskine."
+msgid "Printing system: "
+msgstr "Printsystem: "
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please enter the host name or IP."
-msgstr "Indtast værtsnavn eller IP."
+msgid "Add a user"
+msgstr "Tilfűj bruger"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
-msgstr ""
-"Andet (ikke drakbackup)\n"
-"nűglerne findes allerede"
+msgid "Network configuration (%d adapters)"
+msgstr "Netværkskonfiguration (%d adaptorer)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#, c-format
+msgid "Mandatory package %s is missing"
+msgstr "Krævet pakke %s mangler"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Philippines"
+msgstr "Filippinerne"
+
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#, c-format
+msgid "Ok"
+msgstr "O.k."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Print Queue Name"
+msgstr "Printerkű-navn"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "Űnsker du at bruge aboot?"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "Hviderussisk"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-" Transfer \n"
-"Now"
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
msgstr ""
-" Overfűr \n"
-"Nu"
+"PDQ understűtter kun lokale printere, eksterne LPD printere, og Sokkel/TCP "
+"printere.\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Move files to the new partition"
+msgstr "Flyt filer til den nye partition"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
msgstr ""
-"Opret/overfűr\n"
-"sikkerhedskopieringsnűgler for SSH"
+"Tilfűj hér de CUPS-servere hvis prontere du űnsker at bruge. Du behűver kun "
+"gűre dette, hvis serverne ikke rundkaster deres printerinformation pć "
+"lokalnetværket."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use Expect for SSH"
-msgstr "Brug Expect for SSH"
+msgid "Restore From Catalog"
+msgstr "Genskab fra katalog"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Net Method:"
-msgstr "Netmetode:"
+msgid "Pitcairn"
+msgstr "Pitcairn"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use network connection to backup"
-msgstr "Brug netværksforbindelse til sikkerhedskopiering"
+msgid "IDE"
+msgstr "IDE"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Users"
-msgstr "Brugere"
+msgid "group :"
+msgstr "gruppe:"
-#: ../../standalone/drakbackup:1
+#: ../../fs.pm:1
#, c-format
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
+msgid "mounting partition %s in directory %s failed"
+msgstr "montering af partition %s i katalog %s mislykkedes"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr "Brug inkrementalbackup (overskriv ikke gamle sikkerhedskopier)"
+msgid "Lilo screen"
+msgstr "Lilo-skærm"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid "Remove Selected"
-msgstr "Fjern valgte"
+msgid "LILO with graphical menu"
+msgstr "LILO med grafisk menu"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Do not include the browser cache"
-msgstr "Medtag ikke cache for netlæser"
+msgid "Estimating"
+msgstr "Beregnes"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "Markér alle brugere som du vil have med i din sikkerhedskopi."
+msgid "You can't unselect this package. It is already installed"
+msgstr "Du kan ikke fravælge denne pakke. Den er allerede installeret"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Med denne valgmulighed vil du være i stand til at kunne genskabe\n"
-"enhver version af dit /etc katalog."
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr ", printer \"%s\" pć SMB/Windows-server \"%s\""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Medtag ikke kritiske filer (passwd, group, fstab)"
+msgid "Go on anyway?"
+msgstr "Fortsæt alligevel?"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use incremental backup (do not replace old backups)"
-msgstr "Brug inkrementalbackup (overskriv ikke gamle sikkerhedskopier)"
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "Leder efter tilgængelige pakker og genopbygger rpm-database..."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Lav sikkerhedkopi af dine systemfiler. (/etc kataloget)"
+msgid "Does not appear to be recordable media!"
+msgstr "Ser ikke ud til at være et skrivbart medie!"
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Disse valgmuligheder kan sikkerhedskopiere og genskabe alle filer i dit /etc "
-"katalog.\n"
+msgid "Specify options"
+msgstr "Specificér parametre"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Vanuatu"
+msgstr "Vanuatu"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Either the server name or the server's IP must be given!"
+msgstr "Enten servernavnet eller serverens IP skal angives!"
+
+#: ../../any.pm:1
#, c-format
msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
"\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
msgstr ""
+"En tilpasset opstartsdiskette lader dig starte Linux systemet op uden at "
+"være afhængig af den normale opstarter. Det kan være nyttigt, hvis du ikke "
+"vil installere SILO pć dit system - eller hvis et andet operativsystem "
+"fjerner SILO, eller hvis SILO ikke virker med dit maskinel. En tilpasset "
+"opstartsdiskette kan ogsć bruges sammen med Mandrakes `rescue image', "
+"hvilket gűr det meget nemmere at reparere systemet i tilfælde af "
+"systemnedbrud.\n"
"\n"
-"Markér alle muligheder som du behűver.\n"
+"Hvis du űnsker at lave en opstartsdiskette til dit system, indsæt en "
+"diskette i dit fűrste diskettedrev og tryk 'Ok'."
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Vælg filerne eller katalogerne og klik pć 'Tilfűj'"
+msgid "You can't use an encrypted file system for mount point %s"
+msgstr "Du kan ikke bruge et krypteret filsystem for monteringspunkt %s"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "File Selection"
-msgstr "Valg af filer"
+msgid "Norfolk Island"
+msgstr "Norfolk Űen"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Can't create catalog!"
-msgstr "Kan ikke oprette katalog!"
+msgid "Theme installation failed!"
+msgstr "Installation af tema mislykkedes"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid " Error while sending mail. \n"
-msgstr " Fejl ved afsendelse af post. \n"
+msgid "Nothing to do"
+msgstr "Ingenting at lave"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
-"\n"
-"Drakbackup aktiviteter via bćnd:\n"
-"\n"
+msgid "Use for loopback"
+msgstr "Loopback anvendelse"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
-"\n"
-"Drakbackup aktiviteter via CD:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
+msgstr "Mandrake værktűj til fejlrapportering"
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
-"\n"
-"Drakbackup aktiviteter via %s:\n"
-"\n"
+msgid "use pppoe"
+msgstr "brug pppoe"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving files to the new partition"
+msgstr "Flytter filer til den nye partition"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s med EKSPERMENTAL 3d hardware acceleration"
+
+#: ../../help.pm:1 ../../interactive.pm:1
+#, c-format
+msgid "Advanced"
+msgstr "Avanceret"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transfer"
+msgstr "Overfűr"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak (svensk)"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"FTP forbindelsesproblem: Det var ikke muligt at sende dine backupfiler via "
-"FTP.\n"
+msgid "More Options"
+msgstr "Flere muligheder"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Afghanistan"
+msgstr "Afghanistan"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Delete Hard Drive tar files after backup to other media."
+msgstr "Slet tar-filer pć disken efter sikkerhedskopiering til andet medie."
+
+#: ../../services.pm:1
+#, c-format
msgid ""
-"file list sent by FTP: %s\n"
-" "
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
msgstr ""
-"filliste sendt via FTP: %s\n"
-" "
+"cron er et standard UNIX program der kűrer bruger-specifikke programmer pć "
+"planlagte tidspunkter. Vixie cron tilfűjer en del forbedringer til den "
+"basale UNIX cron, inklusive bedre sikkerhed og stærkere "
+"konfigurationsmuligheder."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "No changes to backup!"
-msgstr "Ingen ændringer til sikkerhedskopi!"
+msgid "Burundi"
+msgstr "Burundi"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Sikkerhedskopifiler for disk..."
+msgid "Add Client -->"
+msgstr "Tilfűj klient -->"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Backup Other files..."
-msgstr "Sikkerhedskopiér andre filer..."
+msgid "Read carefully!"
+msgstr "Læs omhyggeligt!"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "Fremdrift for sikkerhedskopiering af disk..."
+msgid "RW"
+msgstr "RW"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Backup User files..."
-msgstr "Sikkerhedskopiér brugerfiler..."
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
+msgstr "Indtast din tv-standard og land"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Backup system files..."
-msgstr "Sikkerhedskopiér systemfiler..."
+msgid "Port"
+msgstr "Port"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "No tape in %s!"
-msgstr "Intet bćnd i %s."
+msgid "No (experts only)"
+msgstr "Nej (kun eksperter)"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Permission problem accessing CD."
-msgstr "Problem med rettigheder ved adgang til CD."
+msgid "No kernel selected!"
+msgstr "Ingen kerne valgt!"
-#: ../../standalone/drakbackup:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "This may take a moment to erase the media."
-msgstr "Det kan tage lidt tid at slette mediet."
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Tryk 'enter' for at starte det valgte OS, 'e' for at redigere"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Not erasable media!"
-msgstr "Ikke sletbart medie!"
+msgid "Set-GID"
+msgstr "Set-GID"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr "Ser ikke ud til at være et skrivbart medie!"
+msgid "The encryption keys do not match"
+msgstr "Krypteringsnűglerne stemmer ikke overens"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No CDR/DVDR in drive!"
-msgstr "Ingen CDR/DVDR i drevet!"
+msgid "Right \"Windows\" key"
+msgstr "Hűjre Windows-tast"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "WebDAV transfer failed!"
-msgstr "WebDAV overfűrsel mislykkedes!"
+msgid "CDROM / DVDROM"
+msgstr "CDROM / DVDROM"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "WebDAV remote site already in sync!"
-msgstr "WebDAV eksternt netsted allerede synkroniseret!"
+msgid "if set to yes, check empty password in /etc/shadow."
+msgstr "hvis sat til ja, sć tjek for tomme adgangskoder i /etc/shadow."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
-msgid "Total progess"
-msgstr "Total fremdrift"
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
+msgstr ""
+"Fűr du gćr videre bűr du læse betingelserne i licensen omhyggeligt. Den "
+"omfatter hele Mandrake Linux distributionen. Hvis du er enig i alle "
+"betingelserne i den, sć klik pć '%s'-knappen. Hvis ikke, sć kan du bare "
+"slukke for maskinen."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
+"Here is a list of the available printing options for the current printer:\n"
"\n"
-"without being prompted for a password."
msgstr ""
-"Overfűrsel klar.\n"
-"Du vil mćske kontrollere at du kan logge ind pć serveren med:\n"
+"Her er en liste over tilgængelige printmuligheder for den aktuelle printer:\n"
"\n"
-"ssh -i %s %s\\@%s\n"
+
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolutions"
+msgstr "Oplűsninger"
+
+#: ../../network/drakfirewall.pm:1
+#, c-format
+msgid ""
+"drakfirewall configurator\n"
"\n"
-"uden at blive spurgt om en adgangskode."
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
+msgstr ""
+"drakfirewall-konfigurator\n"
+"\n"
+"Dette konfigurerer en personlig brandmur for denne Mandrake Linux-maskine.\n"
+"For en stærk dedikeret brandmurs-lűsning se venligst den specialiserede "
+"MandrakeSecurity Firewall-distribution."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "%s not responding"
-msgstr "%s svarer ikke"
+msgid ""
+"Please enter your username, password and domain name to access this host."
+msgstr ""
+"Indtast venligst dit brugernavn, din adgangskode og dit domænenavn for at fć "
+"adgang til denne vært."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Can't find %s on %s"
-msgstr "Kan ikke finde %s pć %s"
+msgid "Remove selected host"
+msgstr "Fjern valgte vært"
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr "Adgang nægtet ved overfűrsel af %s til %s"
+msgid "Network configuration"
+msgstr "Netværks konfiguration"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Bad password on %s"
-msgstr "Dćrlig adgangskode pć %s"
+msgid "No sharing"
+msgstr "Ingen fildeling"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr "Ingen forespűrgsel om adgangskode pć %s ved port %s"
+msgid "Move selected rule down one level"
+msgstr "Flyt valgte regel et niveau ned"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "ERROR: Cannot spawn %s."
-msgstr "Fejl: Kan ikke starte %s."
+msgid "TB"
+msgstr "Tb"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr "Det kan tage lidt tid at generere nűglerne."
+msgid "Please check if you are using a DVDR device"
+msgstr "Markér om du bruger en CDRW-enhed"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
-"%s-eksisterer, skal den fjernes?\n"
-"\n"
-"Advarsel: Hvis du allerede har lavet denne proces skal du nok\n"
-" fjerne indgangen fra authorized_keys pć serveren."
+msgid "FATAL"
+msgstr "FATAL"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
"\n"
-" DrakBackup Report Details\n"
-"\n"
+"The network address is %s using a netmask of %s.\n"
"\n"
msgstr ""
+"DHCP-serveren vil muliggűre at andre maskiner kan starte op med PXE ved brug "
+"af det opgivne adresseomrćde.\n"
"\n"
-" DrakBackup Rapportdetaljer\n"
-"\n"
+"Netværksadressen er %s med en netmaske pć %s.\n"
"\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Delete"
+msgstr "Slet"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"Allow/Forbid reboot by the console user."
msgstr ""
+"Argumenter: (arg)\n"
"\n"
-" DrakBackup Dæmon-Rapport\n"
-"\n"
-"\n"
+"Tillad/forbyd genstart via konsolbruger."
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
msgstr ""
-"\n"
-" DrakBackup Rapport \n"
-"\n"
+"Jeg kan sætte din maskine op til automatisk at starte X ved\n"
+"opstart. Űnsker du at starte X hver gang du genstarter?"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "INFO"
-msgstr "INFORMATION"
+msgid "Build the disk"
+msgstr "Opbyg disken"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "FATAL"
-msgstr "FATAL"
+msgid "Disconnect %s"
+msgstr "Frakobl %s"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "WARNING"
-msgstr "ADVARSEL"
+msgid "Status:"
+msgstr "Status:"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Cron not available yet as non-root"
-msgstr "Cron er ikke tilgængelig endnu som ikke-root"
+msgid "HTTP proxy"
+msgstr "HTTP-proxy"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Installationen af %s mislykkedes. Fűlgende fejl opstod:"
+msgid "SSH Server"
+msgstr "SSH-server"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No, I don't want autologin"
-msgstr "Nej, jeg űnsker ikke automatisk login"
+msgid "\t-Network by rsync.\n"
+msgstr "\t-Netværk via rsync.\n"
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ja, jeg űnsker automatisk login med denne (bruger, skrivebord)"
+msgid "European protocol"
+msgstr "Europæisk protokol"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "Start X-vinduessystemet efter opstart"
+msgid ", printer \"%s\" on server \"%s\""
+msgstr ", printer \"%s\" pć server \"%s\""
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
#, c-format
-msgid "System mode"
-msgstr "Systemtilstand"
+msgid "Error"
+msgstr "Fejl"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Bootsplash"
-msgstr "Opstartsskærm"
+msgid "allow \"su\""
+msgstr "tillad \"su\""
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Lilo screen"
-msgstr "Lilo-skærm"
+msgid "Australia"
+msgstr "Australien"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
-"\n"
-"Vælg et tema for\n"
-"Lilo og opstartskærmen,\n"
-"du kan vælge\n"
-"dem separat"
+msgid "please wait during ttmkfdir..."
+msgstr "Vent venligst pć ttmkfdir..."
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Themes"
-msgstr "Temaer"
+msgid "Configure only card \"%s\"%s"
+msgstr "Konfigurér kun kort \"%s\"%s"
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Splash selection"
-msgstr "Valg af opstartsskærm"
+msgid "Level"
+msgstr "Niveau"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Du bruger for űjeblikket % som opstartshćndterer.\n"
-"Klik pć Konfigurér for at starte opsætnings-vejlederen."
+msgid "Change the printing system"
+msgstr "Ændr printsystemet"
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr "Problemfri installation af temaer for LiLo- og opstartsskærm"
+msgid ""
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
+msgstr ""
+"Dit system understűtter konfiguration af flere skærme\n"
+"Hvad vil du gűre?"
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
#, c-format
-msgid "Theme installation failed!"
-msgstr "Installation af tema mislykkedes"
+msgid "Configure services"
+msgstr "Konfigurér tjenester"
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Notice"
-msgstr "Bemærk"
+msgid "Broadcast Address:"
+msgstr "Rundkastningsadresse:"
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Relaunch 'lilo'"
-msgstr "Genstart 'lilo'"
+msgid "mount failed: "
+msgstr "montering mislykkedes: "
-#: ../../standalone/drakboot:1
-#, c-format
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
msgstr ""
-"Kan ikke genstarte LiLo!\n"
-"Start \"lilo\" som root pć kommandolinjen for at færdiggűre installationen "
-"af Lilo-tema."
+"GNU/Linux-kernen skal kűre en bergningslűkke ved opstaten for at "
+"initialisere en tidstæller. Dets resultat lagres som bogomips som en mćde at "
+"mćle hastigheden pć cpu'en."
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
-msgstr "Lav initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+msgid "Image"
+msgstr "Billede"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr "Kan ikke opstarte mkinitrd -f /boot/initrd-%s.img %s."
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"Kunne ikke tilfűje printeren \"%s\" til Star Office/OpenOffice.org/GIMP.org."
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
+#, c-format
+msgid "Remote Administration"
+msgstr "Ekstern administration"
+
+#: ../../modules.pm:1
#, c-format
msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
msgstr ""
-"Kan ikke skrive /etc/sysconfig/bootsplash\n"
-"Fil ikke fundet."
+"PCMCIA-understűttelse eksisterer ikke længere for 2.2-kerner. Brug en 2.4-"
+"kerne."
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Write %s"
-msgstr "Skriv %s"
+msgid "Selected All"
+msgstr "Valgte alt"
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr "Kan ikke skrive /etc/sysconfig/bootsplash."
+msgid "CUPS - Common Unix Printing System"
+msgstr "CUPS - Common Unix Printing System"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Lilo message not found"
-msgstr "Lilo-besked ikke fundet"
+msgid "Webmin Service"
+msgstr "Webmin-tjeneste"
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Copy %s to %s"
-msgstr "Kopiér %s til %s"
+msgid "device"
+msgstr "enhed"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Backup %s to %s.old"
-msgstr "Sikkerhedskopiér %s til %s.old"
+msgid "All"
+msgstr "Alt"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create new theme"
-msgstr "Opret nyt tema"
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "Hvilket printersystem (spooler) űnsker du at bruge?"
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"Visningstema\n"
-"under konsol"
+msgid "Greece"
+msgstr "Grækenland"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Install themes"
-msgstr "Installér temaer"
+msgid "An error occurred"
+msgstr "Der er opstćet en fejl"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub modus"
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
+msgstr ""
+"Denne pakke skal opgraderes\n"
+"Er du sikker pć at du vil fravælge den?"
-#: ../../standalone/drakboot:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Yaboot mode"
-msgstr "Yaboot modus"
+msgid "Tamil (Typewriter-layout)"
+msgstr "Tamil (skrivemaskine-layout)"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
+msgid "manual"
+msgstr "manuel"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/File/_Quit"
-msgstr "/Fil/_Afslut"
+msgid "Printer manufacturer, model, driver"
+msgstr "Printerproducent, model, driver"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "/_File"
-msgstr "/_Fil"
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"Der er ikke noget media, eller det er skrivebeskyttet, i enhed %s.\n"
+"Indsæt venligst noget."
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Style Configuration"
-msgstr "Konfiguration af opstartsudseende"
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
+msgstr ""
+"Katalog %s indeholder allerede nogen data\n"
+"(%s)"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "No browser available! Please install one"
-msgstr "Ingen netlæser til stede! Installér venligst én"
+msgid "Printer on NetWare server"
+msgstr "Printer pć en NetWare server"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "connecting to Bugzilla wizard ..."
-msgstr "Opkobler til vejleder for Bugzilla"
+msgid "Give the ram size in MB"
+msgstr "Angiv RAM-stűrrelse i Mb"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Package not installed"
-msgstr "Pakke ikke installeret"
+msgid "Real name"
+msgstr "Rigtige navn"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Not installed"
-msgstr "Ikke installeret"
+msgid "done"
+msgstr "færdig"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Standalone Tools"
-msgstr "Fritstćende værktűjer"
+msgid "Please uncheck or remove it on next time."
+msgstr "Afmarkér eller fjern det gerne næste gang."
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Report"
-msgstr "Rapport"
+msgid "Higher"
+msgstr "Hűjere"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the partitions you want to format"
+msgstr "Vælg partitioner der skal formateres"
+
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
+"\n"
"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
+"Intet tv-kort blev genkendt pć din maskine. Tjek venligst at et video/tv-"
+"kort der understűttes af Linux er korrekt isat.\n"
"\n"
"\n"
-"For at indsende en fejlrapport klik da pć rapport-knappen.\n"
-"Dette vil ćbne et vindue i en netlæser pć https://drakbug.mandrakesoft.com\n"
-" hvor du vil finde en formular der kan udfyldes. Informationen vist ovenfor "
-"vil blive overfűrt til den server\n"
+"Du kan besűge vores database over udstyr pć:\n"
+"\n"
"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Release: "
-msgstr "Udgave: "
+msgid "Can't find %s on %s"
+msgstr "Kan ikke finde %s pć %s"
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Kernel:"
-msgstr "Kerne:"
+msgid "Japanese 106 keys"
+msgstr "Japansk 106 taster"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Package: "
-msgstr "Pakke: "
+msgid "This will take a few minutes."
+msgstr "Dette vil tage nogle fć minutter."
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Application:"
-msgstr "Applikation:"
+msgid "Burkina Faso"
+msgstr "Burkina Faso"
-#: ../../standalone/drakbug:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Configuration Wizards"
-msgstr "Vejledere til konfiguration"
+msgid "Use scanners on remote computers"
+msgstr "Brug skannere pć eksterne maskiner"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
+msgid "Delete selected rule"
+msgstr "Slet valgte regel"
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Windows Migration tool"
-msgstr "Migrationsværktűj for MS Windows"
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Tilgćr printere pć eksterne CUPS-servere"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
+msgid "Insert a floppy in %s"
+msgstr "Indsæt en diskette i %s"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Software Manager"
-msgstr "Programmeladministration"
+msgid "Maldives"
+msgstr "Maldiverne"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Remote Control"
-msgstr "Ekstern kontrol"
+msgid "compact"
+msgstr "kompakt"
-#: ../../standalone/drakbug:1
+#: ../../common.pm:1
#, c-format
-msgid "Msec"
-msgstr "Msek"
+msgid "1 minute"
+msgstr "1 minut"
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
+msgid "on channel %d id %d\n"
+msgstr "pć kanal %d id %d\n"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Mandrake Online"
-msgstr "Mandrake Online"
+msgid ", multi-function device"
+msgstr ", multi-funktions-enhed"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
+msgid "Laos"
+msgstr "Lagos"
-#: ../../standalone/drakbug:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Synchronization tool"
-msgstr "Synkroniseringsværktűj"
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr ""
+"Der er ingen FAT-partitioner at ændre stűrrelse pć (eller ikke nok plads "
+"tilbage)"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "First Time Wizard"
-msgstr "Fűrstegangshjælper"
+msgid "Up"
+msgstr "Op"
-#: ../../standalone/drakbug:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mandrake Control Center"
-msgstr "Mandrake Kontrolcenter"
+msgid "Firewall"
+msgstr "Brandmur"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Mandrake Bug Report Tool"
-msgstr "Mandrake værktűj til fejlrapportering"
+msgid "Area:"
+msgstr "Omrćde:"
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Parameters"
-msgstr "Parametre"
+msgid "(E)IDE/ATA controllers"
+msgstr "(E)IDE/ATA kontrolkort"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Configuration"
-msgstr "Konfiguration af Internetforbindelse"
+msgid "Printer Server"
+msgstr "Printer-server"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "DHCP Client"
-msgstr "DHCP-Klient"
+msgid "Disconnection from the Internet complete."
+msgstr "Nedkopling fra Internet klar."
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ethernet Card"
-msgstr "Ethernet-kort"
+msgid "Custom configuration"
+msgstr "Tilrettet konfiguration"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Gateway"
-msgstr "Gateway"
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
+"Angiv venligst hvor installationsaftrykket vil være tilgængeligt.\n"
+"\n"
+"Hvis du ikke har et eksisterende katalog, sć kopiér venligst indholdet af "
+"CD'en eller DVD'en.\n"
+"\n"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connection type: "
-msgstr "Type af forbindelse"
+msgid "Saint Pierre and Miquelon"
+msgstr "Sankt Pierre og Miquelon"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Profile: "
-msgstr "Profil: "
+msgid ""
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
+msgstr ""
+"\n"
+"Problemer med genskabelse af sikkerhedskopier:\n"
+"\n"
+"I genskabelsestrinnet vil Drakbackup kontrollere alle dine\n"
+"backupfiler fűr genskabelse af dem.\n"
+"Fűr genskabelsen vil Drakbackup fjerne \n"
+"dit nuværende katalog, og alle dine data vil gć tabt.\n"
+"Det er vigtigt at være forsigtig og ikke ændre sikkerhedskopieringens\n"
+"datafiler i hćnden.\n"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Internet connection configuration"
-msgstr "Konfiguration af Internetforbindelse"
+msgid "saving Bootsplash theme..."
+msgstr "gemmer startskærmstema..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Du har ingen internet-opkobling.\n"
-"Opret én fűrst ved at klikke pć 'Konfigurér'"
+msgid "Portugal"
+msgstr "Portugal"
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Dette grænsesnit er ikke blevet konfigureret endnu.\n"
-"Start konfigurationsvejlederen i hovedvinduet"
+msgid "Do you have another one?"
+msgstr "Har du én til?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "activate now"
-msgstr "aktivér nu"
+msgid ", printing to %s"
+msgstr ", skriver til %s"
-#: ../../standalone/drakconnect:1
+#: ../../network/network.pm:1
#, c-format
-msgid "deactivate now"
-msgstr "deaktivér nu"
+msgid "Assign host name from DHCP address"
+msgstr "Tildel værtsnavn fra DHCP-adresse"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DHCP client"
-msgstr "DHCP-klient"
+msgid "Toggle to normal mode"
+msgstr "Ekspert -> Normal"
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Started on boot"
-msgstr "Startede med opstart"
+msgid "Generic"
+msgstr "Standard"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Protocol"
-msgstr "Opstartsprotokol"
+msgid "Cylinder %d to %d\n"
+msgstr "Cylinder %d til %d\n"
#: ../../standalone/drakconnect:1
#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
+msgid "New profile..."
+msgstr "Ny profil..."
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LAN Configuration"
-msgstr "LAN konfiguration"
+msgid "Which disk do you want to move it to?"
+msgstr "Hvilken disk űnsker du at flytte den til?"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "LAN configuration"
-msgstr "LAN konfiguration"
+msgid "Display logo on Console"
+msgstr "Vis logo pć konsol"
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Du har ingen konfigurerede grænsesnit.\n"
-"Konfigurér disse fűrst ved at klikke pć 'Konfigurér'"
+msgid "Windows Domain"
+msgstr "Windows Domain"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Connect..."
-msgstr "Tilslut..."
+msgid "Interface %s (on network %s)"
+msgstr "Grænseflade %s (pć netværk %s)"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Disconnect..."
-msgstr "Afbrud..."
+msgid "INFO"
+msgstr "INFORMATION"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not connected"
-msgstr "Ikke tilsluttet"
+msgid "Wallis and Futuna"
+msgstr "Wallis og Futuna"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Connected"
-msgstr "Tilsluttet"
+msgid "Need to create /etc/dhcpd.conf first!"
+msgstr "Skal oprette /etc/dhcpd.conf fűrst!"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Is FPU present"
+msgstr "Er FPU tilstede"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "There are no scanners found which are available on your system.\n"
+msgstr ""
+"Der blev ikke fundet nogen skannere som er tilgængelige pć dit system.\n"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
+"No additional information\n"
+"about this service, sorry."
msgstr ""
-"Advarsel, en anden internetforbindelse er blevet fundet, der mćske bruger "
-"dit netværk"
+"Beklager, der er ingen ekstra\n"
+"information om denne tjeneste."
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Interface:"
-msgstr "Grænseflade:"
+msgid "Build Single NIC -->"
+msgstr "Byg enkel NIC -->"
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Gateway:"
-msgstr "Gateway:"
+msgid "Is this correct?"
+msgstr "Er dette korrekt?"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Apply"
-msgstr "Anvend"
+msgid "Marshall Islands"
+msgstr "Marshallűerne"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Click here to launch the wizard ->"
-msgstr "Klik her for at starte vejlederen ->"
+msgid "Windows (FAT32)"
+msgstr "Windows (FAT32)"
-#: ../../standalone/drakconnect:1
+#: ../../steps.pm:1
#, c-format
-msgid "Wizard..."
-msgstr "Vejleder..."
+msgid "Root password"
+msgstr "Adgangskode for root"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Status:"
-msgstr "Status:"
+msgid "Build All Kernels -->"
+msgstr "Byg alle kerner -->"
-#: ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Type:"
-msgstr "Type:"
+msgid "if set to yes, report unowned files."
+msgstr "hvis sat til ja, sć rapportér filer der ikke er ejede af nogen."
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Internet access"
-msgstr "Internetadgang"
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"Du har ingen Swap partition\n"
+"\n"
+"Fortsæt alligevel?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hostname: "
-msgstr "Værtsnavn: "
+msgid "Server IP missing!"
+msgstr "Server-IP mangler!"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Konfigurér lokalnetværk..."
+msgid "Suriname"
+msgstr "Surinam"
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "State"
-msgstr "Status"
+msgid "Enable ACPI"
+msgstr "Aktivér ACPI"
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "Driver"
-msgstr "Drivprogram"
+msgid "Graphical Environment"
+msgstr "Grafisk miljű"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Protocol"
-msgstr "Protokol"
+msgid "Gibraltar"
+msgstr "Gibraltar"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Interface"
-msgstr "Grænseflade"
+msgid "on Tape Device"
+msgstr "pć bćndenhed"
-#: ../../standalone/drakconnect:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Configure Internet Access..."
-msgstr "Konfigurér Internetadgang..."
+msgid "Do nothing"
+msgstr "Gűr ingenting"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Wait please"
-msgstr "Vent venligst"
+msgid "Delete Client"
+msgstr "Slet klient"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Navnet pć profilen der skal oprettes (den nye profil oprettes som en \n"
-"kopi af den nuværende) :"
+msgid "Filesystem type: "
+msgstr "Filsystemstype: "
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New profile..."
-msgstr "Ny profil..."
+msgid "Starting network..."
+msgstr "Starter netværk ..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Profile to delete:"
-msgstr "Profil der skal slettes:"
+msgid "Vietnam"
+msgstr "Vietnam"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Del profile..."
-msgstr "Slet profil..."
+msgid "/_Fields description"
+msgstr "/_Feltbeskrivelse"
-#: ../../standalone/drakconnect:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Netværkskonfiguration (%d adaptorer)"
+msgid "Optimize your security by using Mandrake Linux"
+msgstr "Optimér din sikkerhed ved at bruge Mandrake Linux"
-#: ../../standalone/drakedm:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
-"X11 skærmhćndtering giver dig mulighed for grafisk indlogning pć dit system "
-"med X Windowssystemet kűrende, og understűtter flere forskellige X-sessioner "
-"pć din lokale maskine samtidigt."
+msgid "Help"
+msgstr "Hjælp"
-#: ../../standalone/drakedm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Choosing a display manager"
-msgstr "Vælger en fremvisningshćndtering"
+msgid "Your personal phone number"
+msgstr "Dit personlige telefonnummer"
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Which size do you want to keep for Windows on"
+msgstr "Hvilken stűrrelse űnsker du at at beholde Windows pć?"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
msgstr ""
-"Kan ikke lukke mkbootdisk ordentligt: \n"
-" %s \n"
-" %s"
+"Testsider er sendt til printeren.\n"
+"Det kan tage lidt tid fűr printeren starter.\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unable to fork: %s"
-msgstr "Kan ikke fork(): %s"
+msgid "Username required"
+msgstr "Brugernavn krævet"
-#: ../../standalone/drakfloppy:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
msgstr ""
-"Der er ikke noget media, eller det er skrivebeskyttet, i enhed %s.\n"
-"Indsæt venligst noget."
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "Forsikr dig at der er et medie tilstede i enheden %s"
+"Afhængigt af det foretrukne sprog du har valgt vil DrakX automatisk vælge en "
+"bestemt type tastatur. Men du har mćske ikke et tastatur som svarer "
+"nűjagtigt til dit sprog: for eksempel hvis du er en engelsktalende svejtser, "
+"vil du mćske stadig űnske at dit tastatur skal være et svejtsisk tastatur. "
+"Eller hvis du taler engelsk men bor i Québec, er du mćske i samme "
+"situation, hvor dit modersmćl og tastatur ikke passer sammen. I begge "
+"tilfælde giver dette installationstrin mulighed for at vælge et passende "
+"tastatur fra listen.\n"
+"\n"
+"Klik pć '%s'-tasten for at blive præsenteret for den fulde \n"
+"liste af understűttede tastaturer.\n"
+"\n"
+"Hvis du vælger en tastaturudlægning baseret pć et ikke-latinsk alfabet, vil "
+"den næste dialog give dig mulighed for at vælge den tastekombination, der "
+"vil skifte mellem den latinske og den ikke-latinske udlægning."
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build the disk"
-msgstr "Opbyg disken"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "SMB (Windows 9x/NT)-printer indstillinger"
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Output"
-msgstr "Uddata"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
+"Argumenter: (arg)\n"
+"\n"
+"Acceptér/afvis falske IPv4-fejlmeddelelser."
#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Remove a module"
-msgstr "Fjern et modul"
+msgid "mkinitrd optional arguments"
+msgstr "mkinitrd valgfrie argumenter"
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Add a module"
-msgstr "Tilfűj et modul"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
+"Surf pć nettet med Mozilla eller Konqueror, læs din post med Evolution eller "
+"Kmail, lav dine dokumenter med OpenOffice.org."
-#: ../../standalone/drakfloppy:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "omit scsi modules"
-msgstr "undgć scsi-moduler"
+msgid "Protocol for the rest of the world"
+msgstr "Protokol for resten af verden"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "if needed"
-msgstr "hvis nűdvendigt"
+msgid "Print test pages"
+msgstr "Udskriver testsider"
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "omit raid modules"
-msgstr "undgć raid-moduler"
+msgid "64 MB or more"
+msgstr "64 Mb eller mere"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "force"
-msgstr "tving"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
+"Vælg testsiderne du űnsker at udskrive.\n"
+"Bemærk: fototestsiden kan tage ret lang tid at skrive ud, og pć "
+"laserprintere med for lidt hukommelse vil den mćske ikke skrives ud i det "
+"hele taget. Som regel vil det være nok at udskrive standard-testsiden."
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "mkinitrd optional arguments"
-msgstr "mkinitrd valgfrie argumenter"
+msgid "Please select the device where your %s is attached"
+msgstr "Vælg venligst enheden hvor din %s er isat"
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Expert Area"
-msgstr "Ekspertomrćde"
+msgid "Not formatted\n"
+msgstr "Ikke formateret\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "kernel version"
-msgstr "kerne-version"
+msgid "Periodic Checks"
+msgstr "Periodiske kontroller"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "default"
-msgstr "standard"
+msgid "PXE Server Configuration"
+msgstr "Konfiguration af PXE-server"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "General"
-msgstr "Generelt"
+msgid "Backup the system files before:"
+msgstr "Lav sikkerhedskopi af systemfiler fűr:"
-#: ../../standalone/drakfloppy:1
+#: ../../security/level.pm:1
#, c-format
-msgid "boot disk creation"
-msgstr "fremstilling af opstartsdiskette"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"Dette er standard sikkerheds-anbefalingen for en maskine\n"
+" med forbindelse til Internettet som klient. "
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "First floppy drive"
+msgstr "Fűrste diskette-drev"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Size"
-msgstr "Stűrrelse"
+msgid "/File/_Quit"
+msgstr "/Fil/_Afslut"
-#: ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Module name"
-msgstr "Modulnavn"
+msgid "Dvorak"
+msgstr "Dvorak"
-#: ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Post Uninstall"
-msgstr "Efterbehandling for afinstallering"
+msgid "Choose the new size"
+msgstr "Vælg den nye stűrrelse"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Remove fonts on your system"
-msgstr "Fjern skrifttyper pć dit system"
+msgid "Media class"
+msgstr "Medieklasse"
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Initial tests"
-msgstr "Begyndelsestester"
+msgid "The %s is not known by this version of Scannerdrake."
+msgstr "%s kendes ikke af denne version af Scannerdrake."
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Post Install"
-msgstr "Efterbehandling for installering"
+msgid "Faroe Islands"
+msgstr "Færűerne"
#: ../../standalone/drakfont:1
#, c-format
-msgid "Install & convert Fonts"
-msgstr "Installér og konvertér skrifttyper"
+msgid "Restart XFS"
+msgstr "Genstart XFS"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Copy fonts on your system"
-msgstr "Kopiér skrifttyper pć dit system"
+msgid "Add host/network"
+msgstr "Tilfűj vært/netværk"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Remove List"
-msgstr "Fjern liste"
+msgid ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
+msgstr ""
+"hvis sat til ja, sć tjek for tomme adgangskoder, for ingen adgangskode i /"
+"etc/shadow eller for andre brugere end root med id = 0."
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Selected All"
-msgstr "Valgte alt"
+msgid "Please enter the directory to save to:"
+msgstr "Indtast kataloget hvortil der skal gemmes:"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Unselected All"
-msgstr "Fravalgte alt"
+msgid "Model name"
+msgstr "Modelnavn"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "here if no."
-msgstr "Her hvis ikke."
+msgid "Albania"
+msgstr "Albanien"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "click here if you are sure."
-msgstr "Klik her hvis du er sikker."
+msgid "No CDR/DVDR in drive!"
+msgstr "Ingen CDR/DVDR i drevet!"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Install List"
-msgstr "Installationsliste"
+msgid "British Indian Ocean Territory"
+msgstr "British Indian Ocean Territory"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Vælg skrifttypefilen eller -kataloget oh klik pć 'Tilfűj'"
+msgid "Normal Mode"
+msgstr "Normal udgave"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
+"Please be sure that the cron daemon is included in your services. \n"
"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-"Fűr du installerer nogen skrifttyper bűr du være sikker pć at du har lov til "
-"at bruge og installere dem pć dit system. \n"
-"\n"
-"-Du kan installere skrifttyperne pć normal mćde. I sjældne tilfælde kan "
-"fejlbehæftede skrifttyper fć din X-server til at hænge."
+"Forsikr dig gerne om at cron-dæmonen er med i dine tjenester.\n"
+"Bemærk at alle 'net'-medier ogsć bruger disken for nærværende."
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generic Printers"
-msgstr "Generelle printere"
+msgid "Printer connection type"
+msgstr "Printeropkoblingstype"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Abiword"
-msgstr "Abiword"
+msgid "No network adapter on your system!"
+msgstr "Ikke nogen netværksadapter i dit system!"
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
+msgid "Network %s"
+msgstr "Netværk %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
+msgid "Malayalam"
+msgstr "Malayalam"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Vælg de programpakker som vil understűtte skrifttyperne:"
+msgid "Option %s out of range!"
+msgstr "Valg %s er udenfor omrćde!"
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
-"\n"
-" Copyright © 2001-2002 ved MandrakeSoft \n"
-"\tDUPONT Sebastien (oprindelige version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" Dette program er frit programmel; du kan redistribuere det og/eller ændre\n"
-" det i henhold til betingelserne i GNU General Public License, som "
-"publiceret af\n"
-" Free Software Foundation; enten version 2, eller enhver senere udgave\n"
-" af licensen.\n"
-"\n"
-" Dette program er udgivet i hćb om at det vil være anvendeligt, men\n"
-" UDEN NOGEN FORM FOR GARANTI; heller ikke garanti om\n"
-" SALGBARHED eller EGNETHED TIL ET BESTEMT FORMĆL. Se GNU\n"
-" General Public License for flere detaljer.\n"
-"\n"
-" Du skulle have modtaget en kopi af GNU General Public License\n"
-" sammen med dette program; hvis ikke, skriv til Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Tak til:\n"
-" - pfm2afm: \n"
-"\t af Ken Borgendale:\n"
-"\t Konvertér en Windows .pfm-fil til en .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t af James Macnicol: \n"
-"\t type1inst genererer filerne fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t af Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Konvertér ttf-skrifttypefiler til afm- og pfb-skrifttyper\n"
+msgid "Connect %s"
+msgstr "Tilslut %s"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "About"
-msgstr "Om"
+msgid "Restarting CUPS..."
+msgstr "Genstarter CUPS..."
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Font List"
-msgstr "Liste over skrifttyper"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "Udskriver/Skanner/Fotokort pć '%s'"
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Advanced Options"
-msgstr "Avancerede muligheder"
+msgid "Duplicate mount point %s"
+msgstr "Duplikér monterings-sti %s"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Uninstall Fonts"
-msgstr "Afinstallér skrifttyper"
+msgid "if set to yes, run chkrootkit checks."
+msgstr "hvis sat til ja, sć kűr chkrootkit-kontroller."
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Get Windows Fonts"
-msgstr "Hent skrifttyper fra Windows"
+msgid "Connection Configuration"
+msgstr "Forbindelses-konfiguration"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Import Fonts"
-msgstr "Import af skrifttyper"
+msgid "Unknown|Generic"
+msgstr "Ukendt|generisk"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1
#, c-format
-msgid "done"
-msgstr "færdig"
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
+msgstr ""
+"Pć det tidspunkt hvor du installerer Mandrake Linux er det sandsynligt at "
+"nogen af pakkerne er blevet opdaterede siden den oprindelige udgivelse. Fejl "
+"er mćske blevet rettet, og sikkerhedsproblemer mćske lűst. Det er nu muligt "
+"for dig at hente disse ned fra internettet for at disse opdateringer kan "
+"komme dig til gode. Vælg '%s' hvis du har en fungerende internet- "
+"forbindelse eller '%s' hvis du foretrækker at installere opdaterede pakker "
+"senere.\n"
+"\n"
+"Valg af '%s' viser en liste af steder hvorfra opdateringer kan hentes. Du "
+"bűr vælge en der er nær ved dig. Sć vil et træ med pakkevalg fremkomme: "
+"gennemse valget og tryk '%s' for at modtage og installere den valgte pakke "
+"eller '%s' for at afbryde."
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "xfs restart"
-msgstr "genstart af xfs"
+msgid "Quit"
+msgstr "Afslut"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Suppress Fonts Files"
-msgstr "Undertryk skrifttypefiler"
+msgid "Myanmar"
+msgstr "Myanmar"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Restart XFS"
-msgstr "Genstart XFS"
+msgid "Auto allocate"
+msgstr "Allokér automatisk"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Suppress Temporary Files"
-msgstr "Undertryk midlertidige filer"
+msgid "Check bad blocks?"
+msgstr "Led efter beskadigede blokke?"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "type1inst building"
-msgstr "opbyg type1inst"
+msgid "Other MultiMedia devices"
+msgstr "Andre multimedie-enheder"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "pfm fonts conversion"
-msgstr "Konvertering af pfm-skrifttyper"
+msgid "No remote machines"
+msgstr "Ingen ekstern maskine"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "ttf fonts conversion"
-msgstr "Konvertering af ttf-skrifttyper"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"Velkommen til guiden for printerinstallation\n"
+"\n"
+"Denne guide lader dig installere printere sluttet til denne maskine.\n"
+"\n"
+"Hvis du har printere sluttet til denne maskine, sć tilslut og tænd dem nu sć "
+"de kan identificeres automatisk.\n"
+"\n"
+"Klik pć \"Næste\" hvis du er klar og pć \"Annullér\" hvis du ikke vil "
+"installere printere nu."
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Ghostscript referencing"
-msgstr "Ghostscript referencer"
+msgid "Authentication NIS"
+msgstr "Autentificering NIS"
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Fonts conversion"
-msgstr "Konvertering af skrifttyper"
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr ""
+"Indstillingen ``Begræns kommandolinie-indstillinger'' er intet værd uden\n"
+"en adgangskode"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "True Type install done"
-msgstr "Installation af True Type færdig"
+msgid "Internet Connection Sharing currently enabled"
+msgstr "Deling af internetforbindelse er slćet til"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "Vent venligst pć ttmkfdir..."
+msgid "Card IO_0"
+msgstr "Kort IO_0"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "True Type fonts installation"
-msgstr "Installation af True Type-skrifttyper"
+msgid "United Arab Emirates"
+msgstr "Forenede Arabiske Emirater"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Fonts copy"
-msgstr "Kopi af skrifttyper"
+msgid "Card IO_1"
+msgstr "Kort IO_1"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Search for fonts in installed list"
-msgstr "Sűg efter skrifttyper i installeret liste"
+msgid "Thailand"
+msgstr "Thailand"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "could not find any font.\n"
-msgstr "Kunne ikke finde nogen skrifttyper.\n"
+msgid "Routers:"
+msgstr "Rutere:"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Reselect correct fonts"
-msgstr "Genvælg korrekte skrifttyper"
+msgid "Kazakhstan"
+msgstr "Kazakhstan"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr "Kunne ikke finde nogen skrifttyper i dine monterede partitioner"
+msgid "Display all available remote CUPS printers"
+msgstr "Vís alle tilgængelige eksterne CUPS-printere"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_newt.pm:1
#, c-format
-msgid "no fonts found"
-msgstr "kunne ikke finde nogen skrifttyper"
+msgid "Mandrake Linux Installation %s"
+msgstr "Mandrake Linux Installation %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "parse all fonts"
-msgstr "fortolk alle skrifttyper"
+msgid "Thai keyboard"
+msgstr "Thailandsk"
-#: ../../standalone/drakfont:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Unselect fonts installed"
-msgstr "Fravælg installerede skrifttyper"
+msgid "Dialup options"
+msgstr "Opkaldsindstillinger"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Search installed fonts"
-msgstr "Sűg efter installerede skrifttyper"
+msgid "Bouvet Island"
+msgstr "Bouvet-űen"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "If no port is given, 631 will be taken as default."
+msgstr "Hvis ingen port er angivet, vil port 631 blive brugt som standard."
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
+"Change your Cd-Rom!\n"
"\n"
-"Click on Configure to launch the setup wizard."
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
-"Velkommen til værktűjet til deling af internetforbindelse!\n"
-"%s\n"
+"Skift din cdrom!\n"
"\n"
-"Klik pć Konfigurér for at starte programmet til at dele din "
-"internetforbindelse!"
+"Indsæt cdrom'en med navnet \"%s\" i dit cdrom-drev og tryk pć Ok, nćr det "
+"gjort\n"
+"Hvis du ikke har den sć tryk pć Annullér, sć undgćs installation fra denne cd"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "Konfiguration af deling af internetforbindelse"
+msgid "Polish"
+msgstr "Polsk"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Deling af Internetforbindelse har aldrig været konfigureret."
+msgid "Mandrake Online"
+msgstr "Mandrake Online"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Indstilling er allerede gjort. og er for nærværende aktiv."
+msgid "\t-Network by webdav.\n"
+msgstr "\t-Netværk via webdav.\n"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Indstilling er allerede gjort. men er de-aktiveret for nærværende."
+msgid ""
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
+msgstr ""
+"Ingen ethernet netværksadapter er blevet fundet pć dit system. Kűr venligst "
+"værktűjet til maskinel konfiguration."
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Alt er blevet konfigureret.\n"
-"Du kan nu dele din internetforbindelse med andre maskiner pć dit lokale "
-"netværk, ved at bruge DHCP."
+msgid "Netmask"
+msgstr "Netmaske"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemer med installation af %s"
+msgid "No hard drives found"
+msgstr "Ingen diskdrev fundet"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Konfigurerer skript, installerer programmel, starter servere..."
+msgid "Logitech CC Series"
+msgstr "Logitech CC Serien (seriel)"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring..."
-msgstr "Konfigurerer..."
+msgid "2 buttons"
+msgstr "2 knapper"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Mulig LAN-adresse konflikt fundet i konfigurationen til %s!\n"
+msgid "What kind is your ISDN connection?"
+msgstr "Hvad slags type er din ISDN-forbindelse?"
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Lokalnetværket endte ikke med `.0', stćr af."
+msgid "Label"
+msgstr "Mærkat"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "Rekonfigurér grænsesnit og DHCP-server"
+msgid "Save on floppy"
+msgstr "Gem pć diskette"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr "Stűrste udlejningsperiode (i sekunder)"
+msgid "Printer auto-detection"
+msgstr "Auto-opdagelse af printere"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The default lease (in seconds)"
-msgstr "Normal udlejningsperiode (i sekunder)"
+msgid "Which of the following is your ISDN card?"
+msgstr "Hvilket af de fűlgende er dit ISDN-kort?"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
-msgid "The DHCP end range"
-msgstr "Stutningen pć DHCP-omrćdet"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
+msgstr ""
+"NFS er en populær protokol til fildeling over TCP/IP netværk.\n"
+"Denne tjeneste giver NFS-serverfunktionalitet, som konfigureres gennem /etc/"
+"exports filen"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The DHCP start range"
-msgstr "Begyndelsen pć DHCP-omrćdet"
+msgid "Msec"
+msgstr "Msek"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "The internal domain name"
-msgstr "Det interne domænenavn"
+msgid ""
+"=> Notice, a label changed:\n"
+"%s"
+msgstr ""
+"=> Bemærk, en etikette ændredes:\n"
+"%s"
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "The DNS Server IP"
-msgstr "DHCP-serverens IP-adresse"
+msgid "Number of capture buffers:"
+msgstr "Antal fangningsbuffere:"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "(Denne) DHCP-servers IP-adresse"
+msgid "Your choice? (0/1, default `%s') "
+msgstr "Dit valg? (0/1, standard '%s') "
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"DHCP Server Configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
"\n"
-msgstr ""
-"Konfiguration af DHCP-server.\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
"\n"
-"Her kan du vælge forskellige muligheder for konfigurationen af DHCP-"
-"serveren.\n"
-"Hvis du ikke kender betydningen af en valgmulighed, sć lad den blot være som "
-"den er.\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
"\n"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Local Network adress"
-msgstr "Adresse pć lokalnetværk"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
msgstr ""
-"Jeg kan beholde din aktuelle konfiguration og antage at du allerede har sat "
-"en DHCP-server op; i sć tilfælde kontrollér da gerne at jeg har læst det "
-"netværk du bruger til dit lokalnet korrekt; jeg vil ikke genkonfigurere det "
-"og jeg vil ikke rűre ved din konfiguration af DHCP-serveren.\n"
+"Enhver partition der netop er blevet defineret, skal formateres til brug "
+"(formatering betyder oprettelse af et filsystem).\n"
"\n"
-"Den normale DNS-indgang er den cahcendde navneserver konfigureret pć "
-"bransmuren. Du kan eksempelvis erstatte denne med din ISPs DNS-adresse.\n"
+"Nu kan du ogsć űnske at omformatere nogle allerede eksisterende partitioner "
+"for at slette de data som de indeholder. Hvis du űnsker dette, sć markér "
+"ogsć de partitioner som du űnsker at formatere.\n"
"\n"
-"Ellers kan jeg genkonfigurere dit grænsesnit og genkonfigurere en DHCP-"
-"server for dig.\n"
+"Bemærk at det ikke er nűdvendigt at omformatere alle allerede eksisterende "
+"partitioner. Det er nűdvendigt at omformatere de partitioner, der indeholder "
+"operativsystemet (sćsom '/', '/usr' og '/var', men du er ikke nűdt til at "
+"omformatere partitioner som du űnsker at beholde (typisk /home).\n"
+"\n"
+"Vær forsigtig med valg af partitioner; efter formatering vil alle data være "
+"slettede pć de valgte partitioner, og du vil ikke kunne redde nogetsomhelst "
+"af det.\n"
+"\n"
+"Klik pć '%s' nćr du er klar til at formatere partitioner.\n"
+"\n"
+"Klik pć '%s' hvis du űnsker at vælge andre partitioner til at installere dit "
+"nye Mandrake Linux operativsystem.\n"
"\n"
+"Klik pć '%s' for at vælge partitioner som du űnsker at tjekke for dćrlige "
+"blokke."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "French"
+msgstr "Fransk"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTY)"
+msgstr "Tjekkisk (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
+#, c-format
+msgid "Hardware probing in progress"
+msgstr "Sűgning efter udstyr udfűres"
#: ../../standalone/drakgw:1
#, c-format
+msgid "Net Device"
+msgstr "Net-enhed"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Summary"
+msgstr "Oversigt"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
-"Nuværende konfiguration af `%s':\n"
-"\n"
-"Netværk: %s\n"
-"IP-adresse: %s\n"
-"IP-attribut: %s\n"
-"Driver: %s"
+"(parallelporte: /dev/lp0, /dev/lp1 ..., svarende til LPT1:, LPT2: ..., "
+"fűrste USB-printer: /dev/usb/lp0, 2. USB-printer: /dev/usb/lp1 ...)."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Current interface configuration"
-msgstr "Aktuelle grænsesnitskonfiguration"
+msgid "Next"
+msgstr "Næste"
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Show current interface configuration"
-msgstr "Vis aktuelle grænsesnitskonfiguration"
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "Du kan ikke installere opstartsindlæseren pć en %s-partition\n"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "No (experts only)"
-msgstr "Nej (kun eksperter)"
+msgid "CHAP"
+msgstr "CHAP"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Automatic reconfiguration"
-msgstr "Automatisk rekonfiguration"
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp/zeroconf)"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
"\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
"\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
-"Advarsel, netværkskortet (%s) er allerede konfigureret.\n"
"\n"
-"Űnsker du en automatisk re-konfiguration?\n"
+"Velkommen.\n"
"\n"
-"Du kan gűre det i hćnden, men du skal vide hvad du gűr."
+"Parametrene for autokonfigurationen kan ses i afsnittene til venstre"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface already configured"
-msgstr "Netværksgrænsesnit allerede konfigureret"
+msgid "Puerto Rico"
+msgstr "Puerto Rico"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Vælg hvilken netværksadapter som skal forbindes til dit lokalnet."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgstr ""
+"pakken ImageMagick kræves for at det skal fungere korrekt. Klik pć 'O.k.' "
+"for at installere 'ImageMagick' eller 'Annullér' for at afslutte"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "Litauisk \"talrække\" QWERTY"
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
-"%s\n"
"\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
msgstr ""
-"Der er kun én konfigureret netværksadapter i dit system:\n"
+"De fűlgende pakker vil blive fjernet for at kunne opdatere systemet: %s\n"
"\n"
-"%s\n"
"\n"
-"Jeg skal til at sætte dit lokalnet pć med den adapter."
+"Űnsker du virkelig at fjerne disse pakker?\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface"
-msgstr "Netværksgrænsesnit"
+msgid "Anguilla"
+msgstr "Anguilla"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Ingen ethernet netværksadapter er blevet fundet pć dit system. Kűr venligst "
-"værktűjet til maskinel konfiguration."
+msgid "NIS Domain"
+msgstr "NIS-domæne"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No network adapter on your system!"
-msgstr "Ikke nogen netværksadapter i dit system!"
+msgid ""
+"\n"
+"- User Files:\n"
+msgstr ""
+"\n"
+"- Brugerfiler:\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s"
-msgstr "Grænseflade %s"
+msgid "Antarctica"
+msgstr "Antarktis"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Grænseflade %s (benytter modul %s)"
+msgid "Mount options"
+msgstr "Modulindstillinger"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Net Device"
-msgstr "Net-enhed"
+msgid "Jamaica"
+msgstr "Jamaica"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
-"Indtast venligst navnet pć grænsefladen som er koblet pć internettet.\n"
-"\n"
-"Eksempler:\n"
-"\t\tppp+ for modem- eller DSL-opkoblinger, \n"
-"\t\teth0 eller eth1 for kabelopkobling eller ADSL-opkobling via "
-"lokalnetværk, \n"
-"\t\tippp+ for isdn-opkobling.\n"
+"Tilordn rć enheder til blokenheder (som harddisk-\n"
+"partitioner) til brug af applikationer som Oracle eller DVD-afspillere"
-#: ../../standalone/drakgw:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
msgstr ""
-"Du er ved at konfigurere din maskine til at dele sin internetforbindelse.\n"
-"Med denne mulighed vil andre maskiner pć dit lokale netværk kunne bruge "
-"internetforbindelsen pć denne maskine.\n"
-"\n"
-"Forsikr dig om at du har konfigureret din internetforbindelse med "
-"drakconnect fűr du gćr videre.\n"
+"Argumenter: (arg, alert=1)\n"
"\n"
-"Bemærk: du skal bruge en dediceret netværksadapter, for at lave et lokalt "
-"netværk (LAN)."
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Deling af internetforbindelse"
+"Aktivér/deaktivér beskyttelse mod spoofning af navneopslag. Hvis\n"
+"\\fIalert\\fP er sand rapporteres ogsć til syslog."
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Deling af internetforbindelse er nu slćet til"
+msgid "Please wait, preparing installation..."
+msgstr "Vent venligst, forbereder installationen"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Enabling servers..."
-msgstr "Aktiverer servere..."
+msgid "Czech (QWERTZ)"
+msgstr "Tjekkisk (QWERTZ)"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "dismiss"
-msgstr "forkast"
+msgid "Track network card id (useful for laptops)"
+msgstr "Fűlg id for netværkskort (nyttigt for bærbare)"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "reconfigure"
-msgstr "genkonfigurér"
+msgid "The port number should be an integer!"
+msgstr "Port-nummeret bűr være et heltal!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "enable"
-msgstr "aktivér"
+msgid "You must choose an image file first!"
+msgstr "Du skal vælge en biledfil fűrst!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Indstilling af deling af internetforbindelse er allerede gjort.\n"
-"Den er de-aktiveret for nærværende\n"
-"Hvad űnsker du at gűre?"
+msgid "Restore from Hard Disk."
+msgstr "Genskab fra disk."
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Deling af internetforbindelse er slćet fra"
+msgid "Add to LVM"
+msgstr "Tilfűj til LVM"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Deling af internetforbindelse er nu slćet fra"
+msgid "DNS server"
+msgstr "DNS-server"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Disabling servers..."
-msgstr "Slćr servere fra..."
+msgid "Trinidad and Tobago"
+msgstr "Trinidad og Tobago"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "disable"
-msgstr "deaktivér"
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr "LPD og LPRng understűtter ikke IPP printere.\n"
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Indstilling af deling af internetforbindelse er allerede gjort.\n"
-"Deling er aktiveret.\n"
-"\n"
-"Hvad űnsker du at gűre?"
+msgid "simple"
+msgstr "simpel"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Deling af internetforbindelse er slćet til"
+msgid "Clear all"
+msgstr "Slet alt"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
-msgstr "Desværre, vi understűtter kun 2.4-kerner."
+msgid "No test pages"
+msgstr "Ingen testsider"
-#: ../../standalone/drakhelp:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
-msgstr ""
-"Ingen weblæser er installeret pć dit system. Installér venligst én hvis du "
-"űnsker at bladre i hjælpesystemet."
+msgid "Adapter %s: %s"
+msgstr "Adapter %s: %s"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Path"
-msgstr "Sti"
+msgid "Falkland Islands (Malvinas)"
+msgstr "Falklandsűerne (Malvinas)"
-#: ../../standalone/drakperm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "group :"
-msgstr "gruppe:"
+msgid "Unknown model"
+msgstr "Ukendt model"
-#: ../../standalone/drakperm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "user :"
-msgstr "bruger:"
+msgid "if set to yes, check files/directories writable by everybody."
+msgstr "hvis sat til ja, sć kontrollér filer og kataloger skrivbare for alle."
-#: ../../standalone/drakperm:1
+#: ../../help.pm:1
#, c-format
-msgid "Path selection"
-msgstr "Valg af sti"
+msgid "authentication"
+msgstr "autentifikation"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "when checked, owner and group won't be changed"
-msgstr "ved kontrol vil ejer og gruppe ikke blive ændret"
+msgid "Backup Now"
+msgstr "Lav sikkerhedskopiering nu"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Use group id for execution"
-msgstr "Brug gruppe-id ved udfűrelsen"
+msgid "/_File"
+msgstr "/_Fil"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use owner id for execution"
-msgstr "Brug ejers id ved udfűrelsen"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Fjerner printer fra Star Office/OpenOffice.org/GIMP.org"
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
msgstr ""
-"Brugt til katalog:\n"
-" kun ejeren af kataloget eller filen i dette katalog kan slette den"
+"Start pakkefiltrering for Linux kerne 2.2 serien for at opsætte en brandmur "
+"til at beskytte din maskine mod netværksangreb."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Set-GID"
-msgstr "Set-GID"
+msgid "Tamil (ISCII-layout)"
+msgstr "Tamil (ISCII-layout)"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Set-UID"
-msgstr "Set-UID"
+msgid "Mayotte"
+msgstr "Mayotte"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "sticky-bit"
-msgstr "sticky-bit"
+msgid "Creating auto install floppy..."
+msgstr "Laver autoinstallations-diskette"
-#: ../../standalone/drakperm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Property"
-msgstr "Egenskab"
+msgid "Searching for scanners ..."
+msgstr "Sűger efter skannere ..."
-#: ../../standalone/drakperm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Permissions"
-msgstr "Rettigheder"
+msgid "Partitioning"
+msgstr "Opdeling af disk"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Current user"
-msgstr "Aktuelle bruger"
+msgid "Russia"
+msgstr "Rusland"
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "browse"
-msgstr "bladr"
+msgid "ethernet card(s) detected"
+msgstr "ethernet-kort detekteret"
-#: ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Edit current rule"
-msgstr "Redigér aktuelle regel"
+msgid "Syslog"
+msgstr "System"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "edit"
-msgstr "redigér"
+msgid "Can't create catalog!"
+msgstr "Kan ikke oprette katalog!"
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Delete selected rule"
-msgstr "Slet valgte regel"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
+msgstr ""
+"Fuldfűr din sikkerhedsopsætning med dette meget brugervenlige programmel som "
+"kombinerer hűjydelseskomponenter som brandmur, en server og klient for "
+"virtuelle private netværk (VPN), et indbrudsopdagelsessystem og en "
+"trafikadministrator."
-#: ../../standalone/drakperm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "delete"
-msgstr "slet"
+msgid "Not enough free space for auto-allocating"
+msgstr "Ikke nok fri plads til at tildele nye partitioner automatisk"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add a new rule at the end"
-msgstr "Tilfűj en ny regel i slutningen"
+msgid "Set root password"
+msgstr "Sæt root-adgangskode"
-#: ../../standalone/drakperm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "add a rule"
-msgstr "Tilfűj en regel"
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
+msgstr ""
+"Der findes ingen fri driver for lydkortet (%s) men der er en leverandűrejet "
+"driver pć '%s'"
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Move selected rule down one level"
-msgstr "Flyt valgte regel et niveau ned"
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr ""
+"Efter ændring af stűrrelsen af partition %s vil alle data pć denne partition "
+"gć tabt"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Down"
-msgstr "Ned"
+msgid "Internet connection configuration"
+msgstr "Konfiguration af Internetforbindelse"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Move selected rule up one level"
-msgstr "Flyt valgte regel et niveau op"
+msgid "Scanning for TV channels"
+msgstr "Skanner for tv-kanaler"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Up"
-msgstr "Op"
+msgid "Kernel:"
+msgstr "Kerne:"
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "select perm file to see/edit"
-msgstr "vælg perm-fil at se eller redigere"
+msgid "/_About..."
+msgstr "/_Om..."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-"Drakperm bruges til at se filer i brug for at rette tilladelser, ejere og "
-"grupper via msec.\n"
-"Du kan ogsć redigere dine egne regler som vil tilsidesætte standard-reglerne."
+msgid "Bengali"
+msgstr "Bengali"
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "permissions"
-msgstr "rettigheder"
+msgid "Preference: "
+msgstr "Præference: "
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "group"
-msgstr "gruppe"
+msgid "Wizard..."
+msgstr "Vejleder..."
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "user"
-msgstr "bruger"
+msgid "Services: %d activated for %d registered"
+msgstr "Tjenester: %d aktiverede for %d registrerede"
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1
#, c-format
-msgid "path"
-msgstr "sti"
+msgid "Create a bootdisk"
+msgstr "Opret opstartsdiskette"
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Placering af auto_installations .cfg-fil"
+msgid "Solomon Islands"
+msgstr "Salomonűerne"
-#: ../../standalone/drakpxe:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
-"Angiv venligst hvor auto_install.cfg-filen er placeret.\n"
-"\n"
-"Lad den være blank hvis du ikke űnsker at opsætte en automatisk "
-"installationstilstand.\n"
-"\n"
+msgid "(module %s)"
+msgstr "(modul %s)"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
-"Intet CD- eller DVD-aftryk fundet, kopiér venligst installationsprogrammet "
-"og rpm-filerne."
+msgid "Workgroup"
+msgstr "Arbejdsgruppe"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No image found"
-msgstr "Intet aftryk fundet!"
+msgid "Printer host name or IP"
+msgstr "Værtsnavn eller IP-adresse pć printer mangler!"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Installation image directory"
-msgstr "Katalog for installationsaftryk"
+msgid "Host Path or Module"
+msgstr "Stil til vært eller modul"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
-"Angiv venligst hvor installationsaftrykket vil være tilgængeligt.\n"
-"\n"
-"Hvis du ikke har et eksisterende katalog, sć kopiér venligst indholdet af "
-"CD'en eller DVD'en.\n"
-"\n"
+msgid "Name of printer should contain only letters, numbers and the underscore"
+msgstr "Navn pć printer bűr kun indeholde bogstaver, tal og understregen _"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "The DHCP end ip"
-msgstr "Stutnings-ip pć DHCP"
+msgid "Show current interface configuration"
+msgstr "Vis aktuelle grænsesnitskonfiguration"
-#: ../../standalone/drakpxe:1
+#: ../../help.pm:1
#, c-format
-msgid "The DHCP start ip"
-msgstr "Begyndelses-ip pć DHCP"
+msgid "Development"
+msgstr "Udvikling"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
-msgstr ""
-"DHCP-serveren vil muliggűre at andre maskiner kan starte op med PXE ved brug "
-"af det opgivne adresseomrćde.\n"
-"\n"
-"Netværksadressen er %s med en netmaske pć %s.\n"
-"\n"
+msgid "Done"
+msgstr "Færdig"
-#: ../../standalone/drakpxe:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Grænseflade %s (pć netværk %s)"
+msgid "Web Server"
+msgstr "Webserver"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr "Vælg hvilken netværksgrænseflade som skal bruges til dhcp-serveren."
+msgid "\tDo not include System Files\n"
+msgstr "\tMedtag ikke systemfiler\n"
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Chile"
+msgstr "Chile"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
msgstr ""
-"Du er ved at konfigurere din maskine til at installere en PXE-server som en "
-"DHCP-server og en TFTP-server for at bygge en installationsserver.\n"
-"Med denne mulighed vil andre maskiner pć dit lokale netværk kunne "
-"installeres ved brug af denne maskine.\n"
+"Printerdriverne til inkjet som leveres af Lexmark understűtter kun lokale "
+"printere, ikke printere pć eksterne maskiner eller printserverbokse. Forbind "
+"din printer til en lokal port eller konfigurér den pć den maskine, den er "
+"forbundet til."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
"\n"
-"Forsikr dig om at du har konfigureret din internetforbindelse med "
-"drakconnect fűr du gćr videre.\n"
+"Do not use \"scannerdrake\" for this device!"
+msgstr ""
+"Din multifunktionsenhed blev konfigureret automatisk til at kunne skanne. Nu "
+"kan du skanne med 'scanimage' ('scanimage -d hp:%s' for at angive skanneren "
+"hvis du har mere end én) fra kommandolinjen eller med de grafiske "
+"grænseflader 'xscanimage' eller 'xsane'. Hvis du bruger GIMP kan du ogsć "
+"skanne ved at vælge det rigtige punkt i menuen 'Filer/Hent'. Brug ogsć 'man "
+"scanimage' pć kommandolinjen for at fć mere information\n"
"\n"
-"Bemærk: du skal bruge en dediceret netværksadapter, for at lave et lokalt "
-"netværk (LAN)."
+"Brug ikke \"scannerdrake\" pć denne enhed!"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
#, c-format
-msgid "Installation Server Configuration"
-msgstr "Konfiguration af installations-server"
+msgid "(already added %s)"
+msgstr "(har allerede tilfűjet %s)"
-#: ../../standalone/drakpxe:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "PXE Server Configuration"
-msgstr "Konfiguration af PXE-server"
+msgid ", using command %s"
+msgstr ", med kommando %s"
-#: ../../standalone/draksec:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please wait, setting security options..."
-msgstr "Vent venligst, sætter sikkerhedstilvalg..."
+msgid "Alt and Shift keys simultaneously"
+msgstr "Alt og Shift-taster samtidigt"
-#: ../../standalone/draksec:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Please wait, setting security level..."
-msgstr "Vent venligst, sætter sikkerhedsniveau..."
+msgid "Flags"
+msgstr "Flag"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Periodic Checks"
-msgstr "Periodiske kontroller"
+msgid "Add/Del Users"
+msgstr "Tilfűj/slet brugere"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "System Options"
-msgstr "Systemtilvalg"
+msgid "Host/network IP address missing."
+msgstr "IP-adresse pć vært eller netværk mangler."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Network Options"
-msgstr "Netværkstilvalg"
+msgid "weekly"
+msgstr "ugentligt"
-#: ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Settings"
+msgstr "Indstillinger"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The entered host/network IP is not correct.\n"
+msgstr "Den indtastede vært/netværk er ikke korrekt.\n"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Here is the full list of available countries"
+msgstr "Her er den komplette liste over tilgængelige lande"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Alternative test page (A4)"
+msgstr "Alternativ testside (A4)"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
-"De fűlgende tilvalg kan sættes for at tilpasse din\n"
-"systemsikkerhed. Hvis du har brug for forklaringer kan du kigge pć "
-"Hjælpetipsene.\n"
+"Hvis du har alle cd'erne i listen nedenunder, klik Ok.\n"
+"Hvis du ikke har nogen af disse cd'er, klik Annullér.\n"
+"Hvis kun nogen cd'er mangler, fravælg dem, og klik sć Ok."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Security Administrator:"
-msgstr "Sikkerhedsadministrator:"
+msgid "Wait please"
+msgstr "Vent venligst"
-#: ../../standalone/draksec:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Security Alerts:"
-msgstr "Sikkerhedspćmindelser:"
+msgid "PAP"
+msgstr "PAP"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Security Level:"
-msgstr "Sikkerhedsniveau:"
+msgid "Backup user files"
+msgstr "Lav sikkerhedskopi af brugerfiler"
-#: ../../standalone/draksec:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "(default value: %s)"
-msgstr "(Forvalgt: %s)"
+msgid "New"
+msgstr "Ny"
-#: ../../standalone/draksec:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-" to the Internet as a client.\n"
-"\n"
-"High: There are already some restrictions, and more automatic checks "
-"are run every night.\n"
-"\n"
-"Higher: The security is now high enough to use the system as a server "
-"which can accept\n"
-" connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-" should choose a lower level.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
"\n"
-"Paranoid: This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-" features are at their maximum\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
"\n"
-"Security Administrator:\n"
-" If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-" email)"
-msgstr ""
-"Standard: Dette er den normale sikkerhed anbefalet for en maskine der vil "
-"blive brugt til at \n"
-" kűre pć internettet som en klient.\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
"\n"
-"Hűj: Her er en del restriktioner, og flere automatiske kontroller vil "
-"blive kűrt hver nat.\n"
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
"\n"
-"Hűjere: Sikkerheden er nu hűj nok til at bruge systemet som en server som "
-"kan tage imod forbindelser fra mange klienter. Hvis din "
-"maskine kun er en klient pć internettet, bűr du\n"
-"\t vælge et lavere niveau.\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
"\n"
-"Paranoid: Dette er svarende til det foregćende niveau, men systemet er helt "
-"lukket og\n"
-" sikkerhedsfaciliteter er pć deres hűjeste\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
"\n"
-"Sikkerhedsadministrator:\n"
-" Hvis 'Sikkerhedspćmindelser' valgmuligheden er sat, vil "
-"sikkerhedpćmindelser blive sendt til denne bruger (brugernavn eller "
-"epostadresse)"
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
+msgstr ""
+"Dette er den vanskeligste beslutning omkring sikkerheden af dit GNU/Linux- "
+"system: Du skal indtaste din root-adgangskode. Root er systemadministratoren "
+"og er den eneste bruger, der har lov til at lave opdateringer, tilfűje "
+"brugere, ændre i den overordnede systemkonfiguration og sć videre. Kort "
+"sagt, root kan gűre alt! Derfor skal du vælge en adgangskode der er svær at "
+"gætte - DrakX vil fortælle dig hvis adgangskoden du valgte er for nem. Som "
+"víst er du ikke tvunget til at indtaste en adgangskode, men vi advarer dig "
+"pć det kraftigste mod dette. GNU/Linux er lige sć udsat for behandlingsfejl "
+"som andre operativsystemer. Da root kan overvinde alle forhindringer og "
+"uforvarende slette alle data pć partitioner ved sorglűst at behandle "
+"partitionerne selv, er det vigtigt at det er vanskeligt at blive root.\n"
"\n"
+"Adgangskoden bűr være en blanding af bogstaver og tal og mindst 8 tegn "
+"langt. Skriv aldrig en adgangskode ned for root - det gűr det alt for nemt "
+"at bryde ind i et system.\n"
"\n"
+"Gűr dog ikke adgangskoden for lang eller kompliceret da du skal være i stand "
+"til at huske den uden for stort besvær!\n"
"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
-msgstr ""
+"Adgangskoden vil ikke blive vist pć skærmen nćr du indtaster den. Du skal "
+"derfor indtaste adgangskoden to gange, for at begrænse risikoen for "
+"tastefejl. Hvis du kommer til at lave den samme tastefejl to gange, vil "
+"denne 'ukorrekte' adgangskode være den du skal bruge fűrste gang du "
+"forbinder dig til systemet.\n"
"\n"
+"Hvis du űnsker at adgang til denne maskine skal være styret af en "
+"autenticerings-server, sć klik pć '%s'-knappen.\n"
"\n"
+"Hvis dit netværk bruger LDAP, NIS eller PDC Windows domæne-"
+"autentificeringstjenester, vælg da den rigtige som '%s'. Hvis du ikke véd "
+"hvilken der skal bruges, sć bűr du spűrge din systemadministrator.\n"
"\n"
-"Bemærk: Hvis du har et ISA PnP lydkort skal du bruge programmet sndconfig. "
-"Du skal blot indtaste \"sndconfig\" i et konsol-program."
+"Hvis du har problemer med at huske adgangskoder, sć kan du vælge '%s' hvis "
+"din maskine ikke vil være forbundet til Internettet, og du stoler pć alle "
+"som kan fć adgang til maskinen. "
-#: ../../standalone/draksound:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"If you do not know what to choose, stay with the default option."
msgstr ""
-"Intet lydkort blev genkendt pć din maskine. Tjek venligst at et lydkort der "
-"understűttes af Linux er korrekt isat.\n"
-"\n"
-"\n"
-"Du kan besűge vores database over udstyr pć:\n"
-"\n"
+"Nu vil DrakX give dig mulighed for at vælge det űnskede sikkerhedsniveau for "
+"maskinen. Hovedreglen er at sikkerhedsniveauet bűr sættes hűjere, hvis "
+"maskinen skal indeholde vigtige data, eller hvis makinen vil være direkte "
+"offentligt pć Internettet. Men et hűjere sikkerhedsniveau vindes normalt pć "
+"bekostning af letheden af anvendelsen.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid "No Sound Card detected!"
-msgstr "Intet lydkort genkendt!"
+"Hvis du ikke véd hvad du skal vælge, sć behold den foreslćede mulighed."
-#: ../../standalone/draksplash:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "%s BootSplash (%s) preview"
-msgstr "%s smugkig af opstartsskærm (%s)"
+msgid "Load from floppy"
+msgstr "Indlæs fra diskette"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generating preview ..."
-msgstr "Genererer smugkig ..."
+msgid "The following printer was auto-detected. "
+msgstr "De fűlgende printere blev fundet automatisk:"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "You must choose an image file first!"
-msgstr "Du skal vælge en biledfil fűrst!"
+msgid "Boot Floppy"
+msgstr "Start fra diskette"
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "ProgressBar color selection"
-msgstr "Valg af farve for forlűbslinje"
+msgid "Norwegian"
+msgstr "Norsk"
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
-msgstr "Dette tema har endnu ikke nogen startskærm i %s!"
+msgid "Searching for new scanners ..."
+msgstr "Sűger efter nye skannere..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "saving Bootsplash theme..."
-msgstr "gemmer startskærmstema..."
+msgid "Apache World Wide Web Server"
+msgstr "Apache World Wide Web Server"
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "choose image file"
-msgstr "vælg billedfil"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "stepping of the cpu (sub model (generation) number)"
+msgstr "Serie af processoren (undermodel- (generations) nummer)"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "choose image"
-msgstr "vælg billede"
+msgid "select path to restore (instead of /)"
+msgstr "vælg sti at genskabe (i stedet for /)"
#: ../../standalone/draksplash:1
#, c-format
msgid "Configure bootsplash picture"
msgstr "Konfigurér startskærmsbilled"
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "Make kernel message quiet by default"
-msgstr "Skjul kernens beskeder som standard"
-
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Display logo on Console"
-msgstr "Vis logo pć konsol"
+msgid "China"
+msgstr "Kina"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose color"
-msgstr "vælg farve"
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr " (Forsikr dig om at alle dine printere er tilsluttede og tændte).\n"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Save theme"
-msgstr "gem temaer"
+msgid "Georgia"
+msgstr "Georgien"
-#: ../../standalone/draksplash:1
+#: ../../standalone/printerdrake:1
#, c-format
-msgid "Preview"
-msgstr "smugkig"
+msgid "Reading data of installed printers..."
+msgstr "Læser data for nye printere..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "the color of the progress bar"
-msgstr "farven pć forlűbslinjen"
+msgid " Erase Now "
+msgstr " Slet nu "
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "the height of the progress bar"
-msgstr "hűjden pć forlűbslinjen"
+msgid "server"
+msgstr "server"
-#: ../../standalone/draksplash:1
+#: ../../install_any.pm:1
#, c-format
-msgid "the width of the progress bar"
-msgstr "bredden pć forlűbslinjen"
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "Indsæt en tom diskette i diskette-drev %s"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-"y-koordinatet for forlűbsindikatorens\n"
-"űvre venstre hjűrne"
+msgid "yes means the processor has an arithmetic coprocessor"
+msgstr "ja betyder at processoren har en aritmetisk koprocessor"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-"x-koordinatet for forlűbsindikatorens\n"
-"űvre venstre hjűrne"
+msgid "Please Wait... Applying the configuration"
+msgstr "Vent venligst... Sætter konfigurationen i anvendelse"
-#: ../../standalone/draksplash:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the suggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "text box height"
-msgstr "hűjde pć tekstrude"
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Velkommen til GRUB styresystemsvælgeren!"
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "text width"
-msgstr "tekstbredde"
+msgid "Grub"
+msgstr "Grub"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr "antal tegn i tekstrudens y-led"
+msgid "SCSI controllers"
+msgstr "SCSI-kontrolkort"
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
-msgstr "antal tegn i tekstrudens x-led"
+msgid " on LPD server \"%s\", printer \"%s\""
+msgstr " pć LPD-server \"%s\", printer \"%s\""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
#, c-format
-msgid "Browse"
-msgstr "Bladr"
+msgid "Choosing a display manager"
+msgstr "Vælger en fremvisningshćndtering"
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Theme name"
-msgstr "Tema-navn"
+msgid "Zeroconf Host name"
+msgstr "Zeroconf-værtsnavn"
-#: ../../standalone/draksplash:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "final resolution"
-msgstr "endelig oplűsning"
+msgid "IP address should be in format 1.2.3.4"
+msgstr "IP adresse bűr have formatet 1.2.3.4"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "first step creation"
-msgstr "opretter fűrste trin"
+msgid "Ecuador"
+msgstr "Ecuador"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
-"pakken ImageMagick kræves for at det skal fungere korrekt. Klik pć 'O.k.' "
-"for at installere 'ImageMagick' eller 'Annullér' for at afslutte"
+msgid "Add an item"
+msgstr "Tilfűj et element"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-"Intet tv-kort blev genkendt pć din maskine. Tjek venligst at et video/tv-"
-"kort der understűttes af Linux er korrekt isat.\n"
-"\n"
-"\n"
-"Du kan besűge vores database over udstyr pć:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+msgid "The printers on this machine are available to other computers"
+msgstr "Printerne pć denne maskine er tilgængelige for andre maskiner"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "No TV Card detected!"
-msgstr "Intet tv-kort genkendt!"
+msgid "I can't find needed image file `%s'."
+msgstr "Jeg kan ikke finde filen '%s' som jeg behűver."
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "Nu kan du kűre xawtv (under X Window!)!\n"
+msgid "No sound card detected. Try \"harddrake\" after installation"
+msgstr "Intet lydkort genkendt. Prűv at kűre \"harddrake\" efter installation"
-#: ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Have a nice day!"
-msgstr "Hav det godt!"
+msgid ""
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
+msgstr ""
+"Ugyldig port angivet: %s.\n"
+"Det korrekte format er \"port/tcp\" eller \"port/udp\", \n"
+"hvor port er mellem 1 og 65535."
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "XawTV isn't installed!"
-msgstr "XawTV er ikke installeret!"
+msgid "Shell"
+msgstr "Skal"
-#: ../../standalone/drakxtv:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Der opstod en fejl ved skanningen efter tv-kanaler"
+msgid "PCI"
+msgstr "PCI"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Scanning for TV channels"
-msgstr "Skanner for tv-kanaler"
+msgid "Sao Tome and Principe"
+msgstr "Săo Tomé og Príncipe"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Scanning for TV channels in progress ..."
-msgstr "Skanning for tv-kanaler i gang..."
+msgid "Can't login using username %s (bad password?)"
+msgstr "Kan ikke logge ind med brugernavn %s (forkert adgangskode?)"
-#: ../../standalone/drakxtv:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Area:"
-msgstr "Omrćde:"
+msgid "Azerbaidjani (latin)"
+msgstr "Azerbaidiansk (latin)"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "TV norm:"
-msgstr "Tv-standard:"
+msgid "Package not installed"
+msgstr "Pakke ikke installeret"
-#: ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr "Indtast din tv-standard og land"
+msgid "Become a MandrakeExpert"
+msgstr "Bliv en MandrakeEkspert"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Australian Optus cable TV"
-msgstr "Australsk Optus kabel-tv"
+msgid "American Samoa"
+msgstr "Amerikansk Samoa"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Newzealand"
-msgstr "New Zealand"
+msgid "Protocol"
+msgstr "Protokol"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "France [SECAM]"
-msgstr "Frankrig [SECAM]"
+msgid "Copy fonts on your system"
+msgstr "Kopiér skrifttyper pć dit system"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "East Europe"
-msgstr "Űsteuropa"
+msgid "Harddrake help"
+msgstr "Harddrake hjælp"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "West Europe"
-msgstr "Vesteuropa"
+msgid "Bogomips"
+msgstr "Bogomips"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "China (broadcast)"
-msgstr "Kina (broadcast)"
+msgid "Mandrake Terminal Server Configuration"
+msgstr "Konfiguration af Mandrake Terminalserver"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Japan (cable)"
-msgstr "Japan (kabel)"
+msgid ""
+"\n"
+" DrakBackup Report Details\n"
+"\n"
+"\n"
+msgstr ""
+"\n"
+" DrakBackup Rapportdetaljer\n"
+"\n"
+"\n"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Japan (broadcast)"
-msgstr "Japan (broadcast)"
+msgid "Restore all backups"
+msgstr "Genskab alle sikkerhedskopier"
-#: ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Canada (cable)"
-msgstr "Canada (kabel)"
+msgid "if set to yes, check open ports."
+msgstr "hvis sat til ja, sć tjek ćbne porte."
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "USA (cable-hrc)"
-msgstr "USA (kabel-hrc)"
+msgid "This may take a moment to erase the media."
+msgstr "Det kan tage lidt tid at slette mediet."
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "USA (cable)"
-msgstr "USA (kabel)"
+msgid "You can't select/unselect this package"
+msgstr "Du kan ikke vælge/fravælge denne pakke"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "USA (broadcast)"
-msgstr "USA (broadcast)"
+msgid "Warning"
+msgstr "Advarsel"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"XawTV isn't installed!\n"
"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
+"- Other Files:\n"
msgstr ""
-"XawTV er ikke installeret!\n"
-"\n"
-"\n"
-"Hvis du har et tv-kort, men DrakX hverken har fundet det (intet bttv\n"
-"eller saa7134 modul i \"/etc/modules\") eller installeret xawtv, sć indsend "
-"venligst\n"
-"resultaterne af \"lspcidrake -v -f\" til \"install\\@mandrakesoft.com\"\n"
-"med emnet \"undetected TV card\".\n"
"\n"
-"\n"
-"Du kan installere det ved at indtaste \"urpmi xawtv\" som root, pć en "
-"kommandolinje."
+"- Andre filer:\n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "primary"
-msgstr "primær"
+msgid "Remote host name"
+msgstr "Eksternt værtsnavn"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "secondary"
-msgstr "sekundær"
+msgid "deactivate now"
+msgstr "deaktivér nu"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
-msgstr "Klik pć en enhed i det venstre træ for at vise dets oplysninger hér."
+msgid "access to X programs"
+msgstr "adgang til X-programmer"
-#: ../../standalone/harddrake2:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Unknown"
-msgstr "Ukendt"
+msgid "Computing the size of the Windows partition"
+msgstr "Beregner stűrrelsen pć Windows-partitionen"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "unknown"
-msgstr "ukendt"
+msgid "Italy"
+msgstr "Italien"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Running \"%s\" ..."
-msgstr "Kűrer \"%s\" ..."
+msgid "Name of printer"
+msgstr "Navn pć printer"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Run config tool"
-msgstr "Kűr konfigurationsværktűj"
+msgid "disable"
+msgstr "deaktivér"
-#: ../../standalone/harddrake2:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "Configure module"
-msgstr "Konfigurér modul"
+msgid "error unmounting %s: %s"
+msgstr "fejl ved afmontering af %s: %s"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Information"
-msgstr "Informationer"
+msgid "Do it!"
+msgstr "Gűr det!"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Detected hardware"
-msgstr "Fundet maskinel"
+msgid "Cayman Islands"
+msgstr "Caymanűerne"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Harddrake2 version "
-msgstr "Harddrake2 version "
+msgid "%s not responding"
+msgstr "%s svarer ikke"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detection in progress"
-msgstr "Sűgning udfűres"
+msgid "Select model manually"
+msgstr "Vælg model manuelt"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Author:"
-msgstr "Forfatter:"
+msgid "Format"
+msgstr "Formatér"
-#: ../../standalone/harddrake2:1
+#: ../../network/adsl.pm:1
#, c-format
msgid ""
-"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
msgstr ""
-"Dette er HardDrake, et Mandrake-værktűj for konfigurering af maskinel.\n"
-"Version:"
+"Den mest almindelige mćde at forbinde med ADSL er pppoe.\n"
+"Nogen forbindelser bruger pptp, og nogle fć bruger DHCP.\n"
+"Hvis du ikke ved noget, vælg 'brug pppoe'"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "About Harddrake"
-msgstr "Om Harddrake"
+msgid "Various"
+msgstr "Diverse"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "/_About..."
-msgstr "/_Om..."
+msgid "Zip"
+msgstr "Zip"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/_Report Bug"
-msgstr "/_Rapportér fejl"
+msgid ""
+"\n"
+"\n"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
+msgstr ""
+"\n"
+"\n"
+"Printerdrake kunne ikke finde ud af hvilken model din printer %s er. Vælg "
+"venligst den korrekte model fra listen."
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
msgstr ""
-"Nćr du har valgt en enhed kan du se enhedsinformationen pć felter som vises "
-"i den hűjre ramme (\"Information\")"
+"\n"
+"Vælg printerene som du vil overflytte og klik\n"
+"\"Overfűr\"."
-#: ../../standalone/harddrake2:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Select a device !"
-msgstr "Vælg en enhed!"
+msgid "PDQ"
+msgstr "PDQ"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Albanian"
+msgstr "Albansk"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Lithuania"
+msgstr "Litauen"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Compact"
+msgstr "Kompakt"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Detected model: %s %s"
+msgstr "Fandt model: %s %s"
+
+#: ../../share/advertising/03-software.pl:1
+#, c-format
+msgid "MandrakeSoft has selected the best software for you"
+msgstr "MandrakeSoft har udvalgt det bedste programmel til dig"
#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Description of the fields:\n"
+"This is HardDrake, a Mandrake hardware configuration tool.\n"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
"\n"
msgstr ""
-"Beskrivelse af felterne:\n"
+"Dette er HardDrake, et Mandrake-værktűj for konfigurering af maskinel.\n"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
"\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Harddrake help"
-msgstr "Harddrake hjælp"
+msgid "Local files"
+msgstr "Lokale filer"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "/_Fields description"
-msgstr "/_Feltbeskrivelse"
+msgid "maybe"
+msgstr "mćske"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "/_Help"
-msgstr "/_Hjælp"
+msgid "Panama"
+msgstr "Panama"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "/_Quit"
-msgstr "/_Afslut"
+msgid ""
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
+msgstr ""
+"Grafikkortet ser ud til at have en TV-UD-forbindelse.\n"
+"Den kan konfigureres sć den fungerer med billedbuffer\n"
+"\n"
+"Til dette skal du tilslutte grafikkortet til tv'et inden du starter "
+"maskinen.\n"
+"Vælg dernæst indgangen \"TVout\" i starthćntereren.\n"
+"\n"
+"Har du denne funktion?"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "/Autodetektér _jazz-drev"
+msgid "Monitor"
+msgstr "Skærm"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Autodetect _modems"
-msgstr "/Auto-detektér modemmer"
+msgid ""
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
+"Du er ved at opsætte udskrivning til en Windows-konto med adgangskode. "
+"Grundet en fejl i arkitekturen af Sambas klientprogrammel bliver "
+"adgangskoden lagt i klar tekst i Samba-klientens kommandolinje, som bruges "
+"til at sende printjobbet til Windows-serveren. Sć det er muligt for enhver "
+"bruger pć denne maskine at vise adgangskoden pć skærmen ved at angive "
+"kommandoer som 'ps auxwww'.\n"
+"\n"
+"Vi anbefaler at bruge en af de fűlgende alternativer (i alle tilfælde skal "
+"du forsikre dig om at kun maskiner fra dit lokalnetværk har adgang til din "
+"Windows-server, for eksempel ved hjælp af en brandmur):\n"
+"\n"
+"Brug en konto uden adgangskode pć din Windows-server, sćsom 'GUEST'-kontoen "
+"eller en speciel konto som kun anvendes til udskrift. Fjern ikke "
+"adgangskodebeskyttelsen fra en personlig konto eller en administrator-"
+"konto.\n"
+"\n"
+"Opsæt din Windows-server sć printeren er tilgængelig under LPD-protokollen. "
+"Opsæt dernæst udskrift fra denne maskine med '%s'-opkoblingstypen i "
+"Printerdrake.\n"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "/Autodetect _printers"
-msgstr "/Auto-detektér printere"
+msgid "65 thousand colors (16 bits)"
+msgstr "65 tusinde farver (16 bit)"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/_Options"
-msgstr "/_Indstillinger"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
+msgstr ""
+"\n"
+"- Gem til diskdrev pć stien: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "the vendor name of the processor"
-msgstr "navnet pć producenten af processoren"
+msgid "Size: %d KB\n"
+msgstr "Stűrrelse: %d KB\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "the vendor name of the device"
-msgstr "navnet pć producenten af enheden"
+msgid "Remove fonts on your system"
+msgstr "Fjern skrifttyper pć dit system"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "Bustypen som musen er forbundet til"
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
+msgstr ""
+"Advarsel, netværkskortet (%s) er allerede konfigureret.\n"
+"\n"
+"Űnsker du en automatisk re-konfiguration?\n"
+"\n"
+"Du kan gűre det i hćnden, men du skal vide hvad du gűr."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
-msgstr "Serie af processoren (undermodel- (generations) nummer)"
+msgid "Graphical interface at startup"
+msgstr "Start X ved systemstart"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Model stepping"
-msgstr "Modelserie"
+msgid "Please enter the directory to save:"
+msgstr "Indtast kataloget der skal gemmes:"
#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "format of floppies supported by the drive"
+msgstr "Disketteformater som drevet accepterer"
+
+#: ../../raid.pm:1
#, c-format
-msgid "the number of the processor"
-msgstr "nummeret pć processoren"
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "Ikke nok partitioner til at benytte RAID level %d\n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Processor ID"
-msgstr "Processor-ID"
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
+msgstr ""
+"De fűlgende printere er konfigureret. Dobbeltklik pć en printer for at ændre "
+"dens indstillinger, for at gűre den til standard-printer, eller for at se "
+"information om den."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "network printer port"
-msgstr "port for netværksprinter"
+msgid "Connected"
+msgstr "Tilsluttet"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "the name of the CPU"
-msgstr "navnet pć CPU'en"
+msgid "USB printer \\#%s"
+msgstr "USB-printer \\/#%s"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Name"
-msgstr "Navn"
+msgid "Macedonian"
+msgstr "Makedonisk"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "the number of buttons the mouse has"
-msgstr "antal knapper som musen har"
+msgid "Bridges and system controllers"
+msgstr "Broer og system-kontrolkort"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Number of buttons"
-msgstr "Antal knapper"
+msgid "/File/_Save"
+msgstr "/Fil/_Gem"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Official vendor name of the cpu"
-msgstr "Officielt producentnavn pć processoren"
+msgid "Mali"
+msgstr "Mali"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Model name"
-msgstr "Modelnavn"
+msgid "No details"
+msgstr "Ingen detaljer"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
-msgstr "Processorens generation ( fx 8 for PentiumIII,...)"
+msgid "very nice"
+msgstr "meget rart"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Model"
-msgstr "Model"
+msgid "Preview"
+msgstr "smugkig"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "hard disk model"
-msgstr "Disk-model"
+msgid "Remote Control"
+msgstr "Ekstern kontrol"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "class of hardware device"
-msgstr "Klasse af maskinenhed"
+msgid "Please select media for backup..."
+msgstr "Vælg medie for sikkerhedskopi..."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Media class"
-msgstr "Medieklasse"
+msgid "XFree86 server: %s\n"
+msgstr "XFree86-server: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Sub generation of the cpu"
-msgstr "Undergeneration af cpu'en"
+msgid "Allow Thin Clients"
+msgstr "Tillad tynde klienter"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Level"
-msgstr "Niveau"
+msgid "Georgian (\"Russian\" layout)"
+msgstr "Georgisk (russisk layout)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Format of floppies supported by the drive"
-msgstr "Disketteformater som drevet accepterer"
+msgid "/_Options"
+msgstr "/_Indstillinger"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Floppy format"
-msgstr "Disketteformat"
+msgid "Your printer model"
+msgstr "Din printermodel"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
msgstr ""
-"Nogen af de tidlige i486DX-100-chip kan ikke altid returnere til kűrende "
-"tilstand efter 'halt'-instruktionen er brugt"
+"\n"
+"\n"
+"(ADVARSEL! Du bruger XFS til din root-partition,\n"
+"oprettelse af en opstartsdiskette pć en 1.44 Mb diskette vil formentlig\n"
+"mislykkes, fordi XFS kræver en meget stor driver)."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Halt bug"
-msgstr "Halt-fejl"
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
+msgstr ""
+"\n"
+"- Slet tar-filer pć disken efter sikkerhedskopiering.\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
msgstr ""
-"Tidlige pentiummer var fejlbehæftede og frűs vwd afkodning af bytekoden F00F"
+"Intet CD- eller DVD-aftryk fundet, kopiér venligst installationsprogrammet "
+"og rpm-filerne."
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "F00f bug"
-msgstr "F00f-fejl"
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "Mandrakes multifunktions konfigurationsværktűj"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
-"ja betyder at den aritmetiske koprocessor har tilknyttet en undtagelsesvektor"
+msgid "Save"
+msgstr "Gem"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr "Om FPU-en har en irq-vektor"
+msgid "The %s is unsupported"
+msgstr "Denne %s er ikke understűttet"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr "ja betyder at processoren har en aritmetisk koprocessor"
+msgid "Load the drivers for your usb devices."
+msgstr "Indlæs driverne for dine usb-enheder."
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Is FPU present"
-msgstr "Er FPU tilstede"
+msgid "Disk"
+msgstr "Disk"
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Enter a printer device URI"
+msgstr "Indtast en printerenheds-URI"
+
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
msgstr ""
-"Tidlige Intel Pentium chips har en bug i deres flydendetalsprocessor, "
-"hvilket gűr at de ikke kan lave den krævede precision nćr de udfűrer en "
-"flydendetalsdivision (FDIV)"
+"MandrakeSofts succes er baseret pć princippet om frit programmel. Dit nye "
+"operativsystem er resultatet af et samarbejde i det verdensomspændende Linux-"
+"samfund"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Fdiv bug"
-msgstr "Fdiv-fejl"
+msgid "Israel"
+msgstr "Israel"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr "CPU flag rapporteret af kernen"
+msgid "French Guiana"
+msgstr "Fransk Guinea"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Flags"
-msgstr "Flag"
+msgid "default:LTR"
+msgstr "default:LTR"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr "modulet i GNU/Linux-kernen som hćndterer denne enhed"
+msgid "add a rule"
+msgstr "Tilfűj en regel"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Module"
-msgstr "Modul"
+msgid "A command line must be entered!"
+msgstr "En kommandolinje skal opgives!"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr "Nyt dynamisk enhedsnavn genereret af den kűrende kernes devfs"
+msgid "Select user manually"
+msgstr "Hćndpluk bruger"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New devfs device"
-msgstr "Ny devfs-enhed"
+msgid "Transfer printer configuration"
+msgstr "Overfűr printerkonfiguration"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "old static device name used in dev package"
-msgstr "gammel statisk enhedsnavn brugt i dev-pakke"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "Vil du aktivere udskrift pć printerne som nævnes ovenfor?\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Old device file"
-msgstr "Gammel enhedsfil"
+msgid ""
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
+msgstr ""
+"For at dette kan virke pć en W2K PDC skal du nok have administratoren til at "
+"kűre: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add og genstarte serveren.\n"
+"Du skal ogsć have et brugernavn og en adgangskode for at maskinen kan "
+"tilsluttes Windows(TM)-domænet.\n"
+"Hvis netværket ikke er aktiveret vil Drakx prűve at slutte til domænet efter "
+"trinnet med opsætning af netværk.\n"
+"Skulle denne opsætning fejle af nogen ćrsag, og domæneautentifikation ikke "
+"virke, sć kűr 'smbpasswd -j DOMAIN -U USER%%PASSWORD' med dit Windows(tm) "
+"domæne og administrators brugernavn/adgangskode, efter genstart af "
+"systemet.\n"
+"Kommandoen 'wbinfo -t' vil afprűve om dine hemmelige autentifikationsdata er "
+"i orden."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "This field describes the device"
-msgstr "Dette felt beskriver enheden"
+msgid "%s (Port %s)"
+msgstr "%s (port %s)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use network connection to backup"
+msgstr "Brug netværksforbindelse til sikkerhedskopiering"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
msgstr ""
-"CPU-frekvensen i MHz (Megahertz, hvilket som en fűrste tilnærmelse kan groft "
-"regnes som antal instruktioner cpu'en kan udfűre per sekund)"
+"Argumenter: (arg)\n"
+"\n"
+" Aktivér/deaktivér sulogin(8) pć enkeltbrugerniveau."
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, c-format
-msgid "Frequency (MHz)"
-msgstr "Frekvens (MHz)"
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
+"Det er nu tid til at angive hvilke pakker du vil installere pć dit system. "
+"Der er tusindvis af pakker til dit Mandrake Linux system, og for at gűre det "
+"nemmere at hćndtere dem er pakker blevet placeret i grupper af lignende "
+"programmer.\n"
+"\n"
+"Pakkerne er ordnet i grupper svarende til en bestemt anvendelse af din "
+"maskine. Mandrake Linux har 4 foruddefinerede installationer tilgængelige. "
+"Du kan tænke pć installationsklasserne som beholdere for forskellige pakker. "
+"Du kan vælge og vrage programmer fra de forskellige grupper, sć en "
+"installation af 'Arbejdsstation' kan ogsć have programmer fra "
+"udviklingsgruppen installeret.\n"
+"\n"
+" * '%s': Hvis din maskine skal bruges som en arbejdsstation, vælg da en "
+"eller flere af programmerne der er i arbejdsstationsgruppen.\n"
+"\n"
+" * '%s': hvis du vil bruge maskinen til programmering vælg da de relevante "
+"pakker fra denne gruppe.\n"
+"\n"
+" * '%s': hvis det er planen at maskinen skal være en server, sć vælg de mere "
+"almindelige tjenester, som du űnsker at installere pć maskinen.\n"
+"\n"
+" * '%s': her skal du vælge foretrukne grafiske miljű. Vælg mindst ét, hvis "
+"du űnsker at have en grafisk grænseflade tilgængelig.\n"
+"\n"
+"Ved flytning af musen over et gruppenavn vises en kort forklarende tekst om "
+"denne gruppe. Hvis du ikke vælger nogen grupper ved installation (i "
+"modsætning til en opgradering), vil en dialog komme frem som foreslćr dig "
+"forskellige former for minimal installation: \n"
+"\n"
+" * '%s' installerer de færrest mulige antal pakker for at fć en fungerende "
+"grafisk arbejdsstation.\n"
+"\n"
+" * '%s' installerer det basale system plus basale nytteprogrammer og "
+"tilhűrende dokumentation. Denne installation er passende til at sætte en "
+"server op.\n"
+"\n"
+" * '%s' vil installere det absolut mindst mulige antal pakker nűdvendigt for "
+"at fć et virkende Linux-system. Med denne installation fćs kun en "
+"grænseflade med kommandolinjer. Den totale stűrrelse af denne installation "
+"er omkring 65 megabyte.\n"
+"\n"
+"Du kan afkrydse boksen '%s', hvilket er nyttigt, hvis du kender de tilbudte "
+"pakker godt, eller hvis du űnsker at have fuld kontrol over hvad der skal "
+"installeres.\n"
+"\n"
+"Hvis du har startet installationen i '%s'-tilstand, kan du fravælge alle "
+"grupper for at undgć at installere nogen nye pakker. Dette er nyttigt ved "
+"reparation eller opdatering af det eksisterende system."
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
-msgstr "Informationsniveau som kan opnćs via cpuid-instruktionen"
+msgid "Accept user"
+msgstr "Acceptér bruger"
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, c-format
-msgid "Cpuid level"
-msgstr "CPUid-niveau"
+msgid "Server"
+msgstr "Server"
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
-msgstr "Processorens familie (fx 6 for i686-klasse)"
+msgid "Bad choice, try again\n"
+msgstr "Dćrligt valg, prűv igen\n"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Cpuid family"
-msgstr "Cpuid-familie"
+msgid "Heard and McDonald Islands"
+msgstr "Heard- og McDonald-űerne"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr "Om denne processor har Cyrix 6x86 Coma-fejlen eller ej"
+msgid "No alternative driver"
+msgstr "Intet alternativ drivprogram"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Coma bug"
-msgstr "Coma-fejl"
+msgid "Toggle to expert mode"
+msgstr "Normal -> Ekspert"
-#: ../../standalone/harddrake2:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
-"specielle kapaciteter for driveren (brændemulighed eller DVD-understűttelse)"
+msgid "(on this machine)"
+msgstr "(pć denne maskine)"
-#: ../../standalone/harddrake2:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Drive capacity"
-msgstr "Kapacitet for drevet"
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "Gateway-adresse skal have formatet 1.2.3.4"
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Size of the (second level) cpu cache"
-msgstr "Stűrrelse pć (andet niveau) cpu-mellemlagret"
+msgid ""
+"\"%s\" based winmodem detected, do you want to install needed software ?"
+msgstr ""
+"\"%s\" baseret winmodem opdaget, űnsker du at installere krævet programmel?"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Cache size"
-msgstr "Stűrrelse pć cachen"
+msgid "Looking at packages already installed..."
+msgstr "Leder efter pakker der allerede er installeret..."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+msgid "Use Differential Backups"
msgstr ""
-"- pci-enheder: dette giver PCI slottet, enheden og funktionen for dette "
-"kort\n"
-"- eide-enheder: enheden er enten en slave- eller mester-enhed\n"
-"- scsi-enheder: scsi-bussen og scsi enheds-id'er"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Location on the bus"
-msgstr "Plads pć bussen"
+msgid "Driver"
+msgstr "Drivprogram"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
msgstr ""
-"- PCI- og USB-enheder: dette viser producenten, enheden, underproducent og "
-"underenhed PCI/USB id'er"
+"Linuxconf vil nogen gange arrangere udfűrelse af forskellige opgaver ved "
+"opstart for at vedligeholde systemkonfigurationen."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Bus identification"
-msgstr "Bus-identifikation"
+msgid "Printer on remote lpd server"
+msgstr "Printer pć ekstern lpd server"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
msgstr ""
-"GNU/Linux-kernen skal kűre en bergningslűkke ved opstaten for at "
-"initialisere en tidstæller. Dets resultat lagres som bogomips som en mćde at "
-"mćle hastigheden pć cpu'en."
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Bogomips"
-msgstr "Bogomips"
+"Fűr du installerer nogen skrifttyper bűr du være sikker pć at du har lov til "
+"at bruge og installere dem pć dit system. \n"
+"\n"
+"-Du kan installere skrifttyperne pć normal mćde. I sjældne tilfælde kan "
+"fejlbehæftede skrifttyper fć din X-server til at hænge."
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "EIDE/SCSI-kanal"
+msgid ""
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
+msgstr ""
+"Yaboot er en systemopstarter til NewWorld MacIntosh-maskinel. Den kan starte "
+"enten GNU/Linux, MacOS eller MacOSX, hvis de er til stede pć din maskine. "
+"Sædvanligvis vil disse andre styresystemer blive korrekt opdaget og "
+"installeret. Hvis dette ikke skulle være tilfældet kan du her tilfűje en "
+"indgang i hćnden. Vær omhyggelig med at vælge de korrekte parametre.\n"
+"\n"
+"Yaboots hovedvalg er:\n"
+"\n"
+" * Init-besked: En enkel tekstbesked som vises fűr valg af opstart.\n"
+"\n"
+" * Opstartsenhed: Angiver hvor du űnsker at placere informationen som er "
+"nűdvendig for at starte GNU/Linux. Du vil generelt have indstillet en "
+"bootstrap-partition tidligere til at have denne information.\n"
+"\n"
+" * Open firmwareforsinkelse: Til forskel fra LILO er der to forsinkelser "
+"mulige med yaboot. Den fűrste forsinkelse bliver mćlt i sekunder og du kan "
+"ved det punkt vælge mellem CD, OF-opstart, MacOS eller Linux.\n"
+"\n"
+" * Ventetid fűr kerneopstart: Denne er lig LILO-opstartsforsinkelsen. Efter "
+"at have valgt Linux vil du have denne ventetid gange 0,1 sekunder fűr din "
+"forvalgte kernebeskrivelse bliver valgt.\n"
+"\n"
+" * Aktivér CD-opstart?: Hvis du vælger dette valg vil du kunne trykke 'C' "
+"for CD ved det fűrste opstartsvalg.\n"
+"\n"
+" * Aktiver OF-opstart?: Hvis du vælger dette valg vil du kunne trykke 'N' "
+"for 'Open Firmware' ved det fűrste opstartsvalg.\n"
+"\n"
+" * Forvalgt styresystem: Du kan vælge hvilket forvalgt styresystem der skal "
+"startes nćr Open Firmwareforsinkelsen er udlűbet."
-#: ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Channel"
-msgstr "Kanal"
+msgid "No mouse"
+msgstr "Ingen mus"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-msgstr "dette er den fysiske bus som enheden er tilsuttet (fx PCI, USB, ...)"
+msgid "Germany"
+msgstr "Tyskland"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Bus"
-msgstr "Bus"
+msgid "Austria"
+msgstr "Űstrig"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "listen af alternative drivprogrammer for dette lydkort"
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr "Kűr \"sndconfig\" efter installation for at konfigurere dit lydkort"
-#: ../../standalone/harddrake2:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Alternative drivers"
-msgstr "Alternative drivprogrammer"
+msgid "Collapse Tree"
+msgstr "Sammenfold træ"
-#: ../../standalone/keyboarddrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Vil du have at Bak-tasten giver Delete i konsollen?"
+msgid "Auto Install Configurator"
+msgstr "Autoinstallationskonfigurering"
-#: ../../standalone/keyboarddrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Vælg tastaturlayout."
+msgid "Configure networking"
+msgstr "Konfigurér netværk"
-#: ../../standalone/livedrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Kan ikke starte levende opgradering!!!\n"
+msgid "Where do you want to install the bootloader?"
+msgstr "Hvor vil du placere opstartsprogrammet?"
-#: ../../standalone/livedrake:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
msgstr ""
-"Indsæt installations-cdrom'en i dit cdrom-drev og tryk pć Ok, nćr det gjort\n"
-"Hvis du ikke har den - tryk pć Annullér, sć undgćs levende opgradering"
+"Dit valg af foretrukkent sprog vil pćvirke sproget for dokumentationen, "
+"installeringen og systemet generelt. Vælg fűrst den verdensdel du befinder "
+"dig i, og sć det sprog, du taler.\n"
+"\n"
+"Hvis du klikker pć '%s'-knappen kan du vælge andre sprog, der installeres "
+"pć maskinen, og derved installeres de sprogspecifikke filer for "
+"systemdokumentation og programmer. Hvis du for eksempel beværter folk fra "
+"Spanien pć din maskine, vælg da engelsk som standardsproget i træ-visningen, "
+"og '%s' i den avancerede afdeling.\n"
+"\n"
+"Bemærk at du ikke er begrænset til at vælge et enkelt yderligere sprog. Du "
+"kan vælge flere sprog, eller endog installere dem alle ved at markere '%s'-"
+"boksen. Valg af understűttelse for et sprog betyder at oversættelser, "
+"skrifttyper, stavekontrol mv for dette sprog bliver installeret. Ydermere "
+"vil '%s'-boksen gűre at systemet tvinges til at bruge ISO 10646 (UTF-8). "
+"Bemærk dog at dette er en eksperimentel facilitet. Hvis du vælger "
+"forskellige sprog der kræver forskellige kodninger, vil ISO 10646-"
+"understűttelse blive installeret under alle omstændigheder.\n"
+"\n"
+"For at skifte mellem de forskellige sprog installeret pć systemet kan du "
+"starte programmet '/usr/sbin/localedrake' som 'root' for at ændre det sprog "
+"der bruges af hele systemet. Kűrsel af dette program som almindelig bruger "
+"vil kun ændre sprogindstillingerne for denne bruger."
-#: ../../standalone/livedrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Change Cd-Rom"
-msgstr "Skift cdrom"
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr "%s understűttes ikke af denne version af Mandrake Linux."
-#: ../../standalone/localedrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr "Ændringen er fortaget, men for at være effektiv skal du logge ud"
+msgid "DHCP client"
+msgstr "DHCP-klient"
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Save as.."
-msgstr "Gem som..."
+msgid "Restoring from file %s failed: %s"
+msgstr "Genskabning fra fil %s mislykkedes: %s"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please enter your email address below "
-msgstr "Indtast din adgangskode for epost nedenfor"
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech mus (seriel, gammel C7 type)"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "alert configuration"
-msgstr "advarsels-konfiguration"
+msgid "Are you sure that you want to set up printing on this machine?\n"
+msgstr "Er du sikker pć at du vil opsætte udskrift pć denne maskine?\n"
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Du vil modtage en advarsel hvis belastningen er hűjere end denne værdi"
+msgid "New devfs device"
+msgstr "Ny devfs-enhed"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "load setting"
-msgstr "indlæs opsætning"
+msgid "ERROR: Cannot spawn %s."
+msgstr "Fejl: Kan ikke starte %s."
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr ""
-"Du vil modtage en advarsel hvis en af de valgte tjenester ikke længere kűrer"
+msgid "Boot Style Configuration"
+msgstr "Konfiguration af opstartsudseende"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "service setting"
-msgstr "opsætning af tjenester"
+msgid "Automatic time synchronization"
+msgstr "Automatisk tidssynkronisering"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Xinetd Service"
-msgstr "Xinetd-tjeneste"
+msgid "Backup files not found at %s."
+msgstr "Sikkerhedskopier fandtes ikke pć %s."
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Webmin Service"
-msgstr "Webmin-tjeneste"
+msgid "Thank you for choosing Mandrake Linux 9.1"
+msgstr "Tak fordi du valgte Mandrake Linux 9.1"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "SSH Server"
-msgstr "SSH-server"
+msgid "Armenian (phonetic)"
+msgstr "Armensk (fonetisk)"
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Samba Server"
-msgstr "Samba-server"
+msgid "Card model:"
+msgstr "Kortmodel:"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Postfix Mail Server"
-msgstr "Postfix postserver"
+msgid "Thin Client"
+msgstr "Tynd klient"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Ftp Server"
-msgstr "FTP-server"
+msgid "Start Server"
+msgstr "Start server"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Domain Name Resolver"
-msgstr "Lűser for domænenavn"
+msgid "Turkmenistan"
+msgstr "Turkmenistan"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "Apache World Wide Web Server"
+msgid "All remote machines"
+msgstr "Alle eksterne maskiner"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Velkommen til programmet for postkonfigurering.\n"
-"\n"
-"Her vil du kunne opsætte pćmindelsessystemet\n"
+msgid "Install themes"
+msgstr "Installér temaer"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mail alert configuration"
-msgstr "Konfiguration af postpćmindelse"
+msgid ""
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+msgstr ""
+" opdateringer 2002 MandrakeSoft ved Stew Benedict <sbenedict\\@mandrakesoft."
+"com>"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "Mail alert"
-msgstr "Post-pćmindelse"
+msgid "Espanol"
+msgstr "Spansk"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "vent venligst, fortolker filen: %s"
+msgid "Preparing installation"
+msgstr "Forbereder installationen"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Content of the file"
-msgstr "Indhold af filen"
+msgid "Edit selected host/network"
+msgstr "Redigér valgte vært/netværk"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Calendar"
-msgstr "Kalender"
+msgid "Add User -->"
+msgstr "Tilfűj bruger -->"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose file"
-msgstr "Vælg fil"
+msgid "Nauru"
+msgstr "Nauru"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "but not matching"
-msgstr "Men ikke samstemmende"
+msgid "True Type fonts installation"
+msgstr "Installation af True Type-skrifttyper"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "matching"
-msgstr "Samstemmende:"
+msgid "Auto-detect printers connected directly to the local network"
+msgstr "Auto-opdagelse af printere tilsluttet direkte til det lokale netværk"
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Settings"
-msgstr "Indstillinger"
+msgid "LAN configuration"
+msgstr "LAN konfiguration"
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "A tool to monitor your logs"
-msgstr "Et værktűj til at overvćge dine logfiler"
+msgid "hard disk model"
+msgstr "Disk-model"
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "search"
-msgstr "sűg"
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "Du kan ikke bruge et LVM logisk delarkiv for monteringspunkt %s"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Mandrake Tools Explanation"
-msgstr "Forklaringer til Mandrake-værktűjer"
+msgid "Get Windows Fonts"
+msgstr "Hent skrifttyper fra Windows"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Syslog"
-msgstr "System"
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Messages"
-msgstr "Beskeder"
+msgid "Iranian"
+msgstr "Iransk"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "User"
-msgstr "Bruger"
+msgid "Croatia"
+msgstr "Kroatien"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "/Help/_About..."
-msgstr "/Hjælp/_Om..."
+msgid "Gateway:"
+msgstr "Gateway:"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Options/Test"
-msgstr "/Indstillinger/Test"
+msgid "Add server"
+msgstr "Tilfűj server"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/File/-"
-msgstr "/Fil/-"
+msgid "Remote printer name"
+msgstr "Eksternt printernavn"
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "/File/Save _As"
-msgstr "/Fil/Gem _som"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together in order to highly reduce hacking risks."
+msgstr ""
+"MandrakeSoft har designet eksklusive værktűjer for at lave den mest sikre "
+"Linux-version nogensinde: Draksec, et systemsikkerheds-hćndteringsværktűj, "
+"og en stærk brandmur bevirker tilsammen at indbrudsrisikoen reduceres "
+"betragteligt."
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "<control>S"
-msgstr "<control>S"
+msgid "Device: "
+msgstr "Enhed: "
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, c-format
-msgid "/File/_Save"
-msgstr "/Fil/_Gem"
+msgid "Printerdrake"
+msgstr "Printerdrake"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "<control>O"
-msgstr "<control>O"
+msgid "License agreement"
+msgstr "Licensaftale"
-#: ../../standalone/logdrake:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "/File/_Open"
-msgstr "/Fil/_Ćbn"
+msgid "System Options"
+msgstr "Systemtilvalg"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "<control>N"
-msgstr "<control>N"
+msgid "Please enter the directory where backups are stored"
+msgstr "Indtast kataloget hvor sikkerhedskopier gemmes"
-#: ../../standalone/logdrake:1
+#: ../../security/level.pm:1
#, c-format
-msgid "/File/_New"
-msgstr "/Fil/_Ny"
+msgid "Please choose the desired security level"
+msgstr "Vælg det űnskede sikkerhedniveau"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Show only for the selected day"
-msgstr "Vis kun for den valgte dag"
+msgid "This host is already in the list, it cannot be added again.\n"
+msgstr "Denne vært er allerede pć listen, og kan ikke blive tilfűjet igen.\n"
-#: ../../standalone/mousedrake:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Emulate third button?"
-msgstr "Emulering af tredje knap?"
+msgid ", USB printer"
+msgstr ", USB printer"
-#: ../../standalone/mousedrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Please choose your mouse type."
-msgstr "Vælg muse-type."
+msgid "Choose the applications that will support the fonts:"
+msgstr "Vælg de programpakker som vil understűtte skrifttyperne:"
-#: ../../standalone/net_monitor:1
+#: ../../steps.pm:1
#, c-format
-msgid "Connect %s"
-msgstr "Tilslut %s"
+msgid "Configure X"
+msgstr "Konfigurér X"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Disconnect %s"
-msgstr "Frakobl %s"
+msgid "Turkish (traditional \"F\" model)"
+msgstr "Tyrkisk (traditionel \"F\" model)"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Advarsel, en anden internetforbindelse er blevet fundet, der mćske bruger "
-"dit netværk"
+msgid "Congratulations!"
+msgstr "Tillykke!"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "received"
-msgstr "modtaget"
+msgid "Use owner id for execution"
+msgstr "Brug ejers id ved udfűrelsen"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "transmitted"
-msgstr "transmitteret"
+msgid "Down"
+msgstr "Ned"
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "received: "
-msgstr "modtaget: "
+msgid "Raw printer (No driver)"
+msgstr "Rć printer (ingen driver)"
-#: ../../standalone/net_monitor:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "sent: "
-msgstr "sendt: "
+msgid "Install rpm"
+msgstr "Installér rpm"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Local measure"
-msgstr "Lokal mćling"
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
+msgstr ""
+"For at skrive en fil fra kommandolinjen (terminalvinduet) kan du enten bruge "
+"programmet '%s <fil>' eller et grafisk printerværktűj: 'xpp <fil>' eller "
+"'kprinter <fil>'. De grafiske værktűjer lader dig vælge printeren og ændre "
+"indstillingerne pć en nem mćde.\n"
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "average"
-msgstr "gennemsnit"
+msgid "Time remaining "
+msgstr "Resterende tid "
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Color configuration"
-msgstr "Farve-konfiguration"
+msgid "UK keyboard"
+msgstr "Britisk"
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
-"Tilslutning mislykkedes.\n"
-"Kontrollér konfigurationen i Mandrakes kontrolcentral."
+msgid "Unmount"
+msgstr "Afmontér"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Connection complete."
-msgstr "Opkobling fuldfűrt."
+msgid "Uninstall Fonts"
+msgstr "Afinstallér skrifttyper"
-#: ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Disconnection from the Internet complete."
-msgstr "Nedkopling fra Internet klar."
+msgid "Microsoft Explorer"
+msgstr "Microsoft Explorer"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Disconnection from the Internet failed."
-msgstr "Nedkopling fra Internet mislykkedes."
+msgid "German (no dead keys)"
+msgstr "Tysk (ingen dűde taster)"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Connecting to the Internet "
-msgstr "Forbindelse til Internettet "
+msgid "Transferring %s..."
+msgstr "Overfűrer %s ..."
-#: ../../standalone/net_monitor:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Disconnecting from the Internet "
-msgstr "Afbryd forbindelse til Internettet "
+msgid "32 thousand colors (15 bits)"
+msgstr "32 tusinde farver (15 bit)"
-#: ../../standalone/net_monitor:1
+#: ../../any.pm:1
#, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Tester din forbindelse, vent venligst..."
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
+msgstr "Du kan eksportere med NFS eller Samba. Hvilken vil du bruge"
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Logs"
-msgstr "Logger"
+msgid "Reboot"
+msgstr "Genstart"
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connection Time: "
-msgstr "Tilslutningstid: "
+msgid "Gambia"
+msgstr "Gambia"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Receiving Speed:"
-msgstr "Modtagelseshastighed:"
+msgid "Mandrake Control Center"
+msgstr "Mandrake Kontrolcenter"
-#: ../../standalone/net_monitor:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Sending Speed:"
-msgstr "Sendehastighed:"
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
+msgstr ""
+"Du kan angive diverse porte. \n"
+"Gyldige eksempler er: 139/tcp 139/udp.\n"
+"Se /etc/services for information."
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1
#, c-format
-msgid "Statistics"
-msgstr "Statistik"
+msgid ""
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
+msgstr ""
+"Skærm\n"
+"\n"
+" Installationsprogrammet vil normalt automatisk finde ud af at konfigurere "
+"skærmen tilsluttet din maskine. Hvis dette ikke er den rigtige, kan du i "
+"denne liste vælge den skærm du faktisk har tilsluttet din maskine."
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Profile "
-msgstr "Profil "
+msgid "\t-Tape \n"
+msgstr "\t-Tape \n"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakhelp:1
#, c-format
-msgid "Network Monitoring"
-msgstr "Overvćgning af netværk"
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
+msgstr ""
+"Ingen weblæser er installeret pć dit system. Installér venligst én hvis du "
+"űnsker at bladre i hjælpesystemet."
-#: ../../standalone/printerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Reading data of installed printers..."
-msgstr "Læser data for nye printere..."
+msgid "Remember this password"
+msgstr "Husk denne adgangskode"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Name/IP address of host:"
-msgstr "Navn eller IP-adresse pć vært:"
+msgid "Internet Connection Sharing is now enabled."
+msgstr "Deling af internetforbindelse er nu slćet til"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr "Denne vært er allerede pć listen, og kan ikke blive tilfűjet igen.\n"
+msgid "\t-Network by SSH.\n"
+msgstr "\t-Netværk via SSH.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Scannerdrake"
-msgstr "Skannerdrake"
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
+msgstr ""
+" Hvis den űnskede printer blev fundet, sć vælg den fra listen og tilfűj "
+"dernæst brugernavn, adgangskode og/eller arbejdsgruppe om nűdvendigt."
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Du skal indtaste et værtsnavn eller en IP-adresse.\n"
+msgid "Use the free space on the Windows partition"
+msgstr "Brug den frie plads pć Windows-partitionen"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
-msgstr "Vælg værten pć hvilken de lokale skannere skal gűres tilgængelige: "
+msgid "%s found on %s, configure it automatically?"
+msgstr "%s fundet pć %s, skal det konfigureres automatisk?"
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Sharing of local scanners"
-msgstr "Deling af lokale skannere"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
+msgstr ""
+"Argumenter: (arg)\n"
+"\n"
+"Brug adgangskode til at autentificere brugere."
-#: ../../standalone/scannerdrake:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "This machine"
-msgstr "Denne maskine"
+msgid "XFree86 driver: %s\n"
+msgstr "XFree86 driver: %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove selected host"
-msgstr "Fjern valgte vært"
+msgid "This host/network is already in the list, it cannot be added again.\n"
+msgstr ""
+"Denne vært eller dette netværk er allerede pć listen, og kan ikke blive "
+"tilfűjet igen.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Edit selected host"
-msgstr "Redigér valgte vært"
+msgid ""
+"\n"
+" DrakBackup Report \n"
+"\n"
+msgstr ""
+"\n"
+" DrakBackup Rapport \n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add host"
-msgstr "Tilfűj vært"
+msgid "Choose the packages you want to install"
+msgstr "Vælg pakker som skal installeres"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr "Dette er maskinerne fra hvilke skannerne skal bruges:"
+msgid "Papua New Guinea"
+msgstr "Papua Ny Guinea"
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Usage of remote scanners"
-msgstr "Brug skannere"
+msgid "Serbian (cyrillic)"
+msgstr "Serbisk (kyrillisk)"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "All remote machines"
-msgstr "Alle eksterne maskiner"
+msgid "Make kernel message quiet by default"
+msgstr "Skjul kernens beskeder som standard"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
msgstr ""
-"Dette er maskinerne pć hvilke de lokalt forbundne skannere skal gűres "
-"tilgængelige:"
+"Űnsker du fremover at bruge printeren \"%s\"\n"
+"som standard?"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Use the scanners on hosts: "
-msgstr "Brug skannerne pć fűlgende værtsmaskiner:"
+msgid "The DHCP end range"
+msgstr "Stutningen pć DHCP-omrćdet"
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Use scanners on remote computers"
-msgstr "Brug skannere pć eksterne maskiner"
+msgid "Creating bootdisk..."
+msgstr "Opretter opstartsdiskette..."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Skannerdeling til værter: "
+msgid "Wait please, testing your connection..."
+msgstr "Tester din forbindelse, vent venligst..."
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr "Skannerne pć denne maskine er tilgængelige for andre maskiner"
+msgid "Bringing down the network"
+msgstr "Lukker netværket ned"
-#: ../../standalone/scannerdrake:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
-"Du kan ogsć her bestemme om skannere pć eksterne maskiner skal gűres "
-"tilgængelige pć denne maskine"
+msgid "Login ID"
+msgstr "Brugernavn"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
msgstr ""
-"Hær kan du vælge om skannere koblede til denne maskine skal gűres "
-"tilgængelige for eksterne maskiner og i sć fald pć hvilke eksterne maskiner."
+"NFS er en populær protokol til fildeling over TCP/IP\n"
+"netværk. Denne service giver NFS fillćsnings funktionalitet"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Re-generating list of configured scanners ..."
-msgstr "Regenererer liste af konfigurerede skannere ..."
+msgid "DHCP Client"
+msgstr "DHCP-Klient"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Searching for new scanners ..."
-msgstr "Sűger efter nye skannere..."
+msgid "dismiss"
+msgstr "forkast"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for configured scanners ..."
-msgstr "Sűger efter konfigurerede skannere ..."
+msgid "Printing/Scanning on \"%s\""
+msgstr "Udskriver/Skanner pć '%s'"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Scanner sharing"
-msgstr "Skannerdeling"
+msgid "omit raid modules"
+msgstr "undgć raid-moduler"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
-msgid "Add a scanner manually"
-msgstr "Hćndpluk skanner"
+msgid ""
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
+msgstr ""
+"lpd er printer-dæmonen som er nűdvendig for at lpr virker.\n"
+"Den er basalt en server der hćndterer udskrifts-opgaver."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Search for new scanners"
-msgstr "Sűg efter nye skannere..."
+msgid "Internet Connection Configuration"
+msgstr "Konfiguration af Internetforbindelse"
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "There are no scanners found which are available on your system.\n"
+msgid "comma separated numbers"
+msgstr "kommaseparerede tal"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid ""
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
msgstr ""
-"Der blev ikke fundet nogen skannere som er tilgængelige pć dit system.\n"
+"Nćr du har valgt en enhed kan du se enhedsinformationen pć felter som vises "
+"i den hűjre ramme (\"Information\")"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule up one level"
+msgstr "Flyt valgte regel et niveau op"
#: ../../standalone/scannerdrake:1
#, c-format
@@ -19076,370 +19116,345 @@ msgstr ""
"%s\n"
"er tilgængelig pć dit system.\n"
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr ""
-"De fűlgende skannere\n"
-"\n"
-"%s\n"
-"er tilgængelige pć dit system.\n"
-
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"Din %s er blevet konfigureret.\n"
-"Du kan nu skanne dokumenter med 'XSane' fra Multimedie/grafik i "
-"programmenuen."
-
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "choose device"
-msgstr "vælg enhed"
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "Űnsker du virkelig at fjerne printeren \"%s\"?"
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr "Vælg venligst enheden hvor din %s er isat"
+msgid "I can't find any room for installing"
+msgstr "Kan ikke finde plads til installering"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for scanners ..."
-msgstr "Sűger efter skannere ..."
+msgid "Default printer"
+msgstr "Standard printer"
-#: ../../standalone/scannerdrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Auto-detect available ports"
-msgstr "Auto-detektér tilgængelige porte"
+msgid ""
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
+msgstr ""
+"Du har konfigureret flere mćder at koble dig mod internet pć.\n"
+"Venligst vælg den du űnsker at bruger.\n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr "(Bemærk: Parallelle porte kan ikke auto-detekteres)"
+msgid "Modify RAID"
+msgstr "Ændr RAID"
-#: ../../standalone/scannerdrake:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
msgstr ""
-"Denne %s skal være konfigureret af printerdrake.\n"
-"Du kan starte printerdrake fra Mandrake Kontrolcenter i Udstyr-afsnittet."
+"Jeg har opdaget et ISDN PCI-kort, men jeg ved ikke hvilken type. Vælg et PCI-"
+"kort i næste skærmbillede."
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "The %s is unsupported"
-msgstr "Denne %s er ikke understűttet"
+msgid "Add user"
+msgstr "Tilfűj bruger"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr "%s kendes ikke af denne version af Scannerdrake."
+msgid "RAID-disks %s\n"
+msgstr "RAID-diske %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
-msgstr "%s understűttes ikke af denne version af Mandrake Linux."
+msgid "Liberia"
+msgstr "Liberia"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Port: %s"
-msgstr "Vært: %s"
+msgid ""
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
+msgstr ""
+"Indtast venligst navnet pć grænsefladen som er koblet pć internettet.\n"
+"\n"
+"Eksempler:\n"
+"\t\tppp+ for modem- eller DSL-opkoblinger, \n"
+"\t\teth0 eller eth1 for kabelopkobling eller ADSL-opkobling via "
+"lokalnetværk, \n"
+"\t\tippp+ for isdn-opkobling.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid ", "
-msgstr ", "
+msgid "Choose your keyboard"
+msgstr "Vælg tastatur"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Detected model: %s"
-msgstr "Fandt model: %s"
+msgid "Format partitions"
+msgstr "Formatér partitioner"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " ("
-msgstr " ("
+msgid "Automatic correction of CUPS configuration"
+msgstr "Automatisk rettelse af CUPS-konfiguration"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Select a scanner model"
-msgstr "Vælg en skannermodel"
+msgid "Running \"%s\" ..."
+msgstr "Kűrer \"%s\" ..."
-#: ../../standalone/scannerdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr "%s findes ikke skannerdatabasen, skal den konfigureres manuelt?"
+msgid "enable radio support"
+msgstr "aktivér radio-understűttelse"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "%s fundet pć %s, skal det konfigureres automatisk?"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Hardware probing in progress"
-msgstr "Sűgning efter udstyr udfűres"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices were added:\n"
-msgstr "Nogen enheder blev tilfűjet:\n"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "Nogen enheder i maskinelklassen '%s' blev fjernet:\n"
+msgid "Scanner sharing to hosts: "
+msgstr "Skannerdeling til værter: "
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
-msgstr ""
-"MandrakeSofts succes er baseret pć princippet om frit programmel. Dit nye "
-"operativsystem er resultatet af et samarbejde i det verdensomspændende Linux-"
-"samfund"
+msgid "Loopback file name: %s"
+msgstr "Loopback-filnavn: %s"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Welcome to the Open Source world."
-msgstr "Velkommen til en verden med ćben kildetekst"
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "Angiv hvilken printer som udskriftsopgaverne skal gć til."
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr "Tak fordi du valgte Mandrake Linux 9.1"
+msgid "Do not transfer printers"
+msgstr "Overfűr ikke printere"
-#: ../../share/advertising/02-community.pl:1
+#: ../../help.pm:1
#, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
-msgstr ""
-"For at dele din viden og hjælpe med at bygge Linux-værktűjer kan du være med "
-"i diskussionsfora som du finder pć vores 'Samfunds'-netsider."
+msgid "Delay before booting the default image"
+msgstr "Ventetid fűr opstart af forvalgt styresystem"
-#: ../../share/advertising/02-community.pl:1
-#, c-format
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+" DUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
msgstr ""
-"Űnsker du at vide mere om Ćben Kildetekst-samfundet? Vær med i det frie "
-"programmels verden"
-
-#: ../../share/advertising/02-community.pl:1
-#, c-format
-msgid "Build the future of Linux!"
-msgstr "Byg fremtiden for Linux!"
+"\n"
+" Copyright © 2001-2002 ved MandrakeSoft \n"
+"\tDUPONT Sebastien (oprindelige version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" Dette program er frit programmel; du kan redistribuere det og/eller ændre\n"
+" det i henhold til betingelserne i GNU General Public License, som "
+"publiceret af\n"
+" Free Software Foundation; enten version 2, eller enhver senere udgave\n"
+" af licensen.\n"
+"\n"
+" Dette program er udgivet i hćb om at det vil være anvendeligt, men\n"
+" UDEN NOGEN FORM FOR GARANTI; heller ikke garanti om\n"
+" SALGBARHED eller EGNETHED TIL ET BESTEMT FORMĆL. Se GNU\n"
+" General Public License for flere detaljer.\n"
+"\n"
+" Du skulle have modtaget en kopi af GNU General Public License\n"
+" sammen med dette program; hvis ikke, skriv til Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Tak til:\n"
+" - pfm2afm: \n"
+"\t af Ken Borgendale:\n"
+"\t Konvertér en Windows .pfm-fil til en .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t af James Macnicol: \n"
+"\t type1inst genererer filerne fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t af Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Konvertér ttf-skrifttypefiler til afm- og pfb-skrifttyper\n"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
-msgstr ""
-"Mandrake Linux 9.1 giver dig mulighed for at bruge det allernyeste "
-"programmel til at afspille musik, redigere og organisere dine billeder eller "
-"foto, og se videoer."
+msgid "Please check for multisession CD"
+msgstr "Markér om du bruger en multisessions-cd"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
-msgstr ""
-"Surf pć nettet med Mozilla eller Konqueror, læs din post med Evolution eller "
-"Kmail, lav dine dokumenter med OpenOffice.org."
+msgid "user"
+msgstr "bruger"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr "MandrakeSoft har udvalgt det bedste programmel til dig"
+msgid "Use Hard Disk to backup"
+msgstr "Brug disk til sikkerhedskopiering"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
-"Mandrake Linux 9.1 indeholder Mandrake Kontrolcenter, et stærkt værktűj til "
-"at tilpasse din maskine fullstændigt til den brug du har behov for. "
-"Konfigurér og tilpas elementer som sikkerhedsniveau, tilbehűr (skærm, mus, "
-"tastatur), internetforbindelse og meget mere!"
+msgid "Configure"
+msgstr "Konfigurér"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "Mandrakes multifunktions konfigurationsværktűj"
+msgid "Scannerdrake"
+msgstr "Skannerdrake"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"Perfekt tilpasning af din maskine takket være de 11 Mandrake Linux-"
-"brugergrænseflader hvor alt kan tilpasses: KDE 3.1, Gnome 2.2, Window "
-"Maker..."
+"Advarsel, en anden internetforbindelse er blevet fundet, der mćske bruger "
+"dit netværk"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A customizable environment"
-msgstr "Et miljű der kan tilpasses"
+msgid "Backup Users"
+msgstr "Lav sikkerhedskopi af brugere"
-#: ../../share/advertising/06-development.pl:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
msgstr ""
-"At ændre og oprette i forskellige sprog som Perl, Python, C og C++ har "
-"aldrig fűr været sć nemt, takket være GNU gcc 3 og de bedste "
-"udviklingsmiljűer baseret pć ćben kildekode."
-
-#: ../../share/advertising/06-development.pl:1
-#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr "Mandrake Linux 9.1 er den ultimative udviklingsplatform."
+"Indtast domænenavn, værtsnavn og IP adressen for evt. ekstra navne-servere.\n"
+"Dit værtsnavn skal være et fuldt kvalificeret værtsnavn inklusive domæne,\n"
+"f.eks. minpc.mitfirma.dk. Hvis du ikke har nogen ekstra navne-servere,\n"
+"sć lad navne-server-felterne være blanke."
-#: ../../share/advertising/07-server.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
-msgstr ""
-"Lav din maskine om til en stærk server med bare nogen fć klik med musen: "
-"Webserver, post, brandmur, ruter, fil- og print-server, ..."
+msgid "Select Printer Spooler"
+msgstr "Vælg printerkű-behandler"
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Turn your computer into a reliable server"
-msgstr "Gűr din maskine til en pćlidelig server"
+msgid "Create new theme"
+msgstr "Opret nyt tema"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
-msgstr ""
-"Vores komplette udvalg af Linux-lűsninger, sć vel som specialtilbud pć "
-"produkter og andre godbidder, er tilgængelige via nettet i vores e-butik:"
+msgid "Mandrake Tools Explanation"
+msgstr "Forklaringer til Mandrake-værktűjer"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "The official MandrakeSoft Store"
-msgstr "Den officielle MandrakeSoft-butik"
+msgid "No image found"
+msgstr "Intet aftryk fundet!"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
msgstr ""
-"Forűg din maskines ydelse med hjælp fra et et udvalg af firmaer som tilbyder "
-"professionelle lűsninger kompatible med Mandrake Linux. "
+"Nogle vigtige pakker blev ikke installeret rigtigt.\n"
+"Enten er dit cdrom-drev eller din cdrom fejlbehæftet.\n"
+"Tjek cdrom'en pć en færdiginstalleret maskine ved brug af \"rpm -qpl "
+"Mandrake/RPMS/*.rpm\"\n"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
-msgstr "Fć fat i de bedste sager fra Mandrake Linux strategiske partnere"
+msgid "Detected model: %s"
+msgstr "Fandt model: %s"
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakedm:1
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
-"MandrakeSoft har designet eksklusive værktűjer for at lave den mest sikre "
-"Linux-version nogensinde: Draksec, et systemsikkerheds-hćndteringsværktűj, "
-"og en stærk brandmur bevirker tilsammen at indbrudsrisikoen reduceres "
-"betragteligt."
+"X11 skærmhćndtering giver dig mulighed for grafisk indlogning pć dit system "
+"med X Windowssystemet kűrende, og understűtter flere forskellige X-sessioner "
+"pć din lokale maskine samtidigt."
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Optimize your security by using Mandrake Linux"
-msgstr "Optimér din sikkerhed ved at bruge Mandrake Linux"
+msgid "if set to yes, run the daily security checks."
+msgstr "hvis sat til ja, sć kűr de daglige sikkerhedskontroller."
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr "Produktet findes tilgængeligt pć MandrakeStores netsted."
+msgid "Azerbaijan"
+msgstr "Aserbajdsjan"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
-msgstr ""
-"Fuldfűr din sikkerhedsopsætning med dette meget brugervenlige programmel som "
-"kombinerer hűjydelseskomponenter som brandmur, en server og klient for "
-"virtuelle private netværk (VPN), et indbrudsopdagelsessystem og en "
-"trafikadministrator."
+msgid "No tape in %s!"
+msgstr "Intet bćnd i %s."
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr "Gűr dine netværk sikre med multinetværksbrandmur (MNF)"
+msgid "Dvorak (US)"
+msgstr "Dvorak (US)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
-msgstr ""
-"Slut dig til MandrakeSofts supporthold og Linux-samfundet pć nettet for at "
-"dele din viden og hjælpe andre ved at blive en anerkendt Ekspert pć det "
-"tekniske supportnetsted:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+msgstr "dette er den fysiske bus som enheden er tilsuttet (fx PCI, USB, ...)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr "Find lűsningerne pć dine problemer via MandrakeSofts online-support."
+msgid "How is the printer connected?"
+msgstr "Hvordan er printeren tilsluttet?"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Become a MandrakeExpert"
-msgstr "Bliv en MandrakeEkspert"
+msgid "Security level"
+msgstr "Sikkerhedsniveau"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr ""
-"Alle hændelser fűlges op af en teknisk kvalificeret MandrakeSoft-ekspert."
+msgid "final resolution"
+msgstr "endelig oplűsning"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr "En platform pć nettet som tilgodesér firmaers specifikke supportbehov"
+msgid "Services"
+msgstr "Tjenester"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "MandrakeExpert for firmaer"
+msgid "4 MB"
+msgstr "4 Mb"
#: ../../share/compssUsers:999
msgid "Office Workstation"
@@ -19454,10 +19469,6 @@ msgstr ""
"gnumeric), pdf-visere, o.lign."
#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Arbejdsstation"
-
-#: ../../share/compssUsers:999
msgid "Game station"
msgstr "Spillemaskine"
@@ -19530,10 +19541,6 @@ msgstr ""
"supplerende værktűjer."
#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafisk miljű"
-
-#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Gnome-arbejdsstation"
@@ -19552,10 +19559,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Udvikling"
-
-#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "C og C++ udviklingsbiblioteker, programmer, og include-filer."
@@ -19624,34 +19627,99 @@ msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr "NFS-vært, SMB-vært, mellemvært (proxy), SSH-vært"
#: ../../share/compssUsers:999
-msgid "Audio station"
-msgstr "Lyd-station"
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr ""
+"Værktűjssæt til at læse samt sende post og nyheder, og til at browse pć "
+"nettet"
-#: ../../share/compssUsers:999
-msgid "Sound playing/editing programs"
-msgstr "Lyd-afspillere og -redigeringsværktűjer"
+#~ msgid "Internet connection & configuration"
+#~ msgstr "Internetforbindelse & -konfiguration"
-#: ../../share/compssUsers:999
-msgid "Video station"
-msgstr "Video-maskine"
+#~ msgid "Configure the connection"
+#~ msgstr "Konfigurér forbindelsen"
-#: ../../share/compssUsers:999
-msgid "Video playing programs"
-msgstr "Video-afspilningsprogrammer"
+#~ msgid "Disconnect"
+#~ msgstr "Afbryd"
-#: ../../share/compssUsers:999
-msgid "Graphic station"
-msgstr "Grafisk maskine"
+#~ msgid "Connect"
+#~ msgstr "Tilslut"
-#: ../../share/compssUsers:999
-msgid "Graphics programs"
-msgstr "Grafiske programmer"
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Du kan genkonfigurere din forbindelse"
-#: ../../share/compssUsers:999
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr ""
-"Værktűjssæt til at læse samt sende post og nyheder, og til at browse pć "
-"nettet"
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Du kan lave forbindelse til Internettet eller omkonfigurere din "
+#~ "forbindelse."
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "Du er ikke forbundet til Internettet nu."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can disconnect or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Du kan lukke forbindelsen til Internettet eller genkonfigurere din "
+#~ "forbindelse."
+
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "Du har forbindelse til Internettet nu."
+
+#~ msgid "files sending by FTP"
+#~ msgstr "Filer sendes via FTP"
+
+#~ msgid "Use incremental backup (do not replace old backups)"
+#~ msgstr "Brug inkrementalbackup (overskriv ikke gamle sikkerhedskopier)"
+
+#~ msgid "Relaunch 'lilo'"
+#~ msgstr "Genstart 'lilo'"
+
+#~ msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+#~ msgstr "Lav initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+
+#~ msgid "Write %s"
+#~ msgstr "Skriv %s"
+
+#~ msgid "Copy %s to %s"
+#~ msgstr "Kopiér %s til %s"
+
+#~ msgid "Backup %s to %s.old"
+#~ msgstr "Sikkerhedskopiér %s til %s.old"
+
+#~ msgid "ttf fonts conversion"
+#~ msgstr "Konvertering af ttf-skrifttyper"
+
+#~ msgid "Fonts conversion"
+#~ msgstr "Konvertering af skrifttyper"
+
+#~ msgid "Author:"
+#~ msgstr "Forfatter:"
+
+#~ msgid "Audio station"
+#~ msgstr "Lyd-station"
+
+#~ msgid "Sound playing/editing programs"
+#~ msgstr "Lyd-afspillere og -redigeringsværktűjer"
+
+#~ msgid "Video station"
+#~ msgstr "Video-maskine"
+
+#~ msgid "Video playing programs"
+#~ msgstr "Video-afspilningsprogrammer"
+
+#~ msgid "Graphic station"
+#~ msgstr "Grafisk maskine"
+
+#~ msgid "Graphics programs"
+#~ msgstr "Grafiske programmer"
#~ msgid "Printer sharing"
#~ msgstr "Printerdeling"
@@ -19700,9 +19768,6 @@ msgstr ""
#~ msgid "GDI Laser Printer using the Zenographics ZJ-Stream Format"
#~ msgstr "GDI Laserprinter med Zenographics ZJ-Stream-Format"
-#~ msgid "%s"
-#~ msgstr "%s"
-
#~ msgid "Office"
#~ msgstr "Kontor"
diff --git a/perl-install/share/po/de.po b/perl-install/share/po/de.po
index 3158ea61a..9a3012f2c 100644
--- a/perl-install/share/po/de.po
+++ b/perl-install/share/po/de.po
@@ -6,7 +6,7 @@
msgid ""
msgstr ""
"Project-Id-Version: MandrakeInstaller\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
"PO-Revision-Date: 2003-02-22 14:28+0100\n"
"Last-Translator: Stefan Siegel <siegel@mandrakesoft.com>\n"
"Language-Team: German <cooker-i18n@linux-mandrake.com>\n"
@@ -14,3700 +14,639 @@ msgstr ""
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
-msgstr ""
-"Das Teilen zwischen Benutzern verwendet die Gruppe „fileshare“.\n"
-"Sie können UserDrake verwenden, um Benutzerkennzeichen in diese Gruppe "
-"aufzunehmen."
-
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid "Cancel"
-msgstr " Abbruch "
-
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Launch userdrake"
-msgstr "Userdrake starten"
+msgid "Scanning partitions to find mount points"
+msgstr "Durchsuchen der Partitionen, um die EinhÀngpunkte zu finden."
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
+msgid "if set to yes, check additions/removals of suid root files."
msgstr ""
-"Wollen Sie Benutzern erlaubern, Verzeichnisse freizugeben?\n"
-"Wenn Sie das erlauben, können die Anwender Verzeichnisse in Konqueror oder "
-"Nautilus im KontextmenĂŒ der entsprechenden Verzeichnisses freigeben.\n"
-"\n"
-"Mit „Benutzerdefiniert“ können Sie eine Einstellung pro Kennzeichen "
-"vornehmen.\n"
-
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Das zwingend benötigte Paket „%s“ fehlt."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
+msgid "\t\tErase=%s"
msgstr ""
-"Sie können die Dateien mittels Samba oder NFS anbieten. Welche Variante "
-"wollen Sie?"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Das Paket %s muss installiert sein. Soll ich es installieren?"
-
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Custom"
-msgstr "Benutzerdefiniert"
+msgid "network printer port"
+msgstr "Port des Netzwerkdruckers"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Allow all users"
-msgstr "Allen Benutzern erlauben"
+msgid "Please insert floppy disk:"
+msgstr "Bitte legen Sie eine Diskette ein:"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No sharing"
-msgstr "Kein Teilen"
+msgid "PCMCIA"
+msgstr "PCMCIA"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "More"
-msgstr "Mehr"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Here is the full list of available countries"
-msgstr "Hier die komplette Liste aller Staaten"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Please choose your country."
-msgstr "Bitte wÀhlen Sie Ihren Staat."
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid " / Region"
-msgstr "RĂ©union"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Country"
-msgstr "Staat"
-
-#: ../../any.pm:1
-#, c-format
-msgid "All languages"
-msgstr "Alle Sprachen"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Use Unicode by default"
-msgstr "Verwende standardmĂ€ĂŸig Unicode"
-
-#: ../../any.pm:1
-#, c-format
msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr ""
-"Sie können andere Sprachen auswÀhlen, die nach der Installation zur "
-"VerfĂŒgung stehen."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Please choose a language to use."
-msgstr "Bitte wÀhlen Sie die zu verwendende Sprache."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Choose the window manager to run:"
-msgstr "WĂ€hlen Sie den Window-Manager, den Sie verwenden wollen:"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Choose the default user:"
-msgstr "WĂ€hlen Sie den Standard-Nutzer:"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Do you want to use this feature?"
-msgstr "Möchten Sie diese Möglichkeit nutzen?"
-
-#: ../../any.pm:1
-#, c-format
-msgid "I can set up your computer to automatically log on one user."
+"The backup partition table has not the same size\n"
+"Still continue?"
msgstr ""
-"Ich kann Ihren Computer so einrichten, dass ein Benutzer automatisch "
-"angemeldet wird."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Icon"
-msgstr "Symbol"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Password (again)"
-msgstr "Passwort (erneut)"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Password"
-msgstr "Passwort"
+"Die gesicherte Partitionstabelle hat nicht dieselbe GrĂ¶ĂŸe\n"
+"Soll trotzdem fortgefahren werden?"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "User name"
+msgid "Which username"
msgstr "Benutzerkennzeichen"
#: ../../any.pm:1
#, c-format
-msgid "Real name"
-msgstr "Benutzername"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Accept user"
-msgstr "Benutzer akzeptieren"
-
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
-#, c-format
-msgid "Done"
-msgstr "Fertig"
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Benutzerkennzeichen einrichten\n"
-"%s"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Add user"
-msgstr "Benutzer hinzufĂŒgen"
-
-#: ../../any.pm:1
-#, c-format
-msgid "This user name has already been added"
-msgstr "Dieses Benutzerkennzeichen existiert bereits"
-
-#: ../../any.pm:1
-#, c-format
-msgid "The user name is too long"
-msgstr "Dieses Benutzerkennzeichen ist zu lang"
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Das Benutzerkennzeichen sollte nur aus Kleinbuchstaben, Ziffern, \n"
-"„-“ und „_“ bestehen"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Please give a user name"
-msgstr "Bitte geben Sie ein Benutzerkennzeichen an"
-
-#: ../../any.pm:1
-#, c-format
-msgid "This password is too simple"
-msgstr "Dieses Passwort ist zu einfach"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Please try again"
-msgstr "Bitte versuchen Sie es erneut"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "The passwords do not match"
-msgstr "Die Passwörter stimmen nicht ĂŒberein"
-
-#: ../../any.pm:1
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s wurde bereits hinzugefĂŒgt)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to compilation tools"
-msgstr "Zugriff auf Compiler"
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to network tools"
-msgstr "Zugriff auf Netzwerk-Werkzeuge"
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to administrative files"
-msgstr "Zugriff auf Verwaltungsdateien"
-
-#: ../../any.pm:1
-#, c-format
-msgid "allow \"su\""
-msgstr "„su“ erlauben"
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to rpm tools"
-msgstr "Zugriff auf RPM-Werkzeuge"
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to X programs"
-msgstr "Zugriff auf X-Programme"
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
-msgstr ""
-"Hier sind die verschiedenen EintrÀge.\n"
-"Sie können weitere hinzufĂŒgen oder existierende Ă€ndern."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Other OS (windows...)"
-msgstr "Anderes Betriebssystem (Windows ...)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Anderes Betriebssystem (MacOS ...)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Anderes Betriebssystem (SunOS ...)"
-
-#: ../../any.pm:1 ../../standalone/drakbackup:1
-#, c-format
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm:1
-#, c-format
msgid "Which type of entry do you want to add?"
msgstr "Welche Art Eintrag wollen Sie hinzufĂŒgen?"
-#: ../../any.pm:1
-#, c-format
-msgid "This label is already used"
-msgstr "Dieser Eintrag existiert bereits"
-
-#: ../../any.pm:1
-#, c-format
-msgid "You must specify a root partition"
-msgstr "Sie mĂŒssen die Verzeichnisbaumwurzel festlegen"
-
-#: ../../any.pm:1
-#, c-format
-msgid "You must specify a kernel image"
-msgstr "Sie MĂŒssen ein Kern-Abbild angeben"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Empty label not allowed"
-msgstr "Leere EintrÀge sind nicht erlaubt"
-
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Default"
-msgstr "Standard"
-
-#: ../../any.pm:1
-#, c-format
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Initrd-size"
-msgstr "GrĂ¶ĂŸe der Init-RamDisk"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Append"
-msgstr "Übergeben"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Label"
-msgstr "Identifikator"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Unsafe"
-msgstr "Unsicher"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Table"
-msgstr "Tabelle"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Root"
-msgstr "Verzeichnisbaumwurzel"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Read-write"
-msgstr "Schreiben/Lesen"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Initrd"
-msgstr "Init-RamDisk"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Video mode"
-msgstr "Video Modus"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Image"
-msgstr "Kern"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Default OS?"
-msgstr "Standard BS"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Enable OF Boot?"
-msgstr "Open Firmware Start erlauben"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Enable CD Boot?"
-msgstr "BS-Start von CD erlauben"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "BS-Startverzögerung fĂŒr den Kern"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Open Firmware Delay"
-msgstr "Open Firmware Verzögerung"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Boot device"
-msgstr "Boot GerÀt"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Init Message"
-msgstr "Init Nachricht"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Bootloader to use"
-msgstr "Zu verwendender Betriebssystemstarter"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Bootloader main options"
-msgstr "Haupt-Optionen des Betriebssystemstarters"
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Die Option „Gebrauch der Kommandozeilen-Parameter einschrĂ€nken“ ist ohne \n"
-"Angabe eines Passworts wirkungslos"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Give the ram size in MB"
-msgstr "Geben Sie die RAM GrĂ¶ĂŸe in MB an"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Enable multiple profiles"
-msgstr "Mehrere Profile einschalten"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Geben Sie, falls nötig, die genaue RAM GrĂ¶ĂŸe an (%d MB gefunden)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Die Partition /tmp bei jedem Systemstart sÀubern"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Create a bootdisk"
-msgstr "Startdiskette erstellen"
-
-#: ../../any.pm:1
-#, c-format
-msgid "restrict"
-msgstr "EinschrÀnken"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Restrict command line options"
-msgstr "Gebrauch der Kommandozeilen-Parameter einschrÀnken"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Force No APIC"
-msgstr "No ACPI erzwingen"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Enable ACPI"
-msgstr "ACPI aktivieren"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Delay before booting default image"
-msgstr "Wartezeit vorm Starten des Standard Betriebssystems"
-
-#: ../../any.pm:1
-#, c-format
-msgid "compact"
-msgstr "Kompakt"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Compact"
-msgstr "Kompakt"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Bootloader installation"
-msgstr "Installation des Betriebssystemstarters"
-
-#: ../../any.pm:1
-#, c-format
-msgid "First sector of boot partition"
-msgstr "Erster Sektor der Boot-Partition"
-
-#: ../../any.pm:1
-#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Erster Sektor der Platte (MBR)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Wo soll der Betriebssystemstarter installiert werden?"
-
-#: ../../any.pm:1
-#, c-format
-msgid "LILO/grub Installation"
-msgstr "LILO/Grub Installation"
-
-#: ../../any.pm:1
-#, c-format
-msgid "SILO Installation"
-msgstr "SILO Installation"
-
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Skip"
-msgstr "Überspringen"
-
-#: ../../any.pm:1
-#, c-format
-msgid "On Floppy"
-msgstr "Auf Diskette"
-
-#: ../../any.pm:1
-#, c-format
-msgid "First sector of the root partition"
-msgstr "Erster Sektor der Verzeichnisbaumwurzel"
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Sie haben sich entschieden, Ihren Betriebssystemstarter auf einer Partition "
-"zu starten.\n"
-"Das impliziert, dass Sie einen anderen Betriebssystemstarter im Master-Boot-"
-"Record haben (etwa System Commander).\n"
-"\n"
-"Von welchem Verzeichnis wollen Sie starten?"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Creating bootdisk..."
-msgstr "Startdiskette wird erstellt..."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr ""
-"Legen Sie eine Diskette, die keine relevanten Daten mehr enthĂ€lt in „%s“ ein."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"WĂ€hlen Sie das Laufwerk, in dem Sie die Start-Diskette erstellen wollen"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Second floppy drive"
-msgstr "zweite Disketten-Laufwerk"
+msgid "Restore partition table"
+msgstr "Partitionstabelle wiederherstellen"
-#: ../../any.pm:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "First floppy drive"
-msgstr "erste Disketten-Laufwerk"
+msgid "On CUPS server \"%s\""
+msgstr "Auf CUPS-Server „%s“"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "Ich kann kein Laufwerk finden"
+msgid "Post-install configuration"
+msgstr "Einstellungen fĂŒr nach der Installation"
-#: ../../any.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Mit einer individuellen Startdiskette können Sie Ihr LINUX-System starten, \n"
-"ohne auf den normalen Betriebssystemstarter angewiesen zu sein. Dies ist "
-"nĂŒtzlich, wenn \n"
-"Sie weder LILO noch Grub auf Ihrem System installieren möchten, wenn ein \n"
-"anderes Betriebssystem Ihren Betriebssystemstarter entfernt hat oder Ihre "
-"Hardware-Konfiguration die Verwendung eines Betriebssystemstarters nicht "
-"korrekt \n"
-"verarbeitet. Eine individuelle Startdiskette kann auch mit der Linux \n"
-"Mandrake Rettungsdiskette verwendet werden, wodurch das System nach \n"
-"schwerwiegenden Fehlern viel einfacher wiederhergestellt werden kann.\n"
-"\n"
-"Möchten Sie jetzt eine Startdiskette fĂŒr Ihr System erstellen?\n"
-"%s"
+msgid "Use ``%s'' instead"
+msgstr "Verwenden Sie stattdessen „%s“"
-#: ../../any.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(WARNUNG! Sie verwenden XFS fĂŒr Ihre Verzeichnisbaumwurzel.\n"
-"Das Erstellen einer Startdiskette auf einem 1,44 MB Medium \n"
-"schlĂ€ sicher fehl, da XFS einen sehr großen Treiber benötigt)."
+msgid "Type"
+msgstr "Typ"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
msgstr ""
-"Mit einer individuellen Startdiskette können Sie Ihr LINUX-System starten, \n"
-"ohne auf einen Betriebssystemstarter angewiesen zu sein. Dies ist "
-"nĂŒtzlich, \n"
-"wenn Sie SILO nicht auf Ihrem System installieren möchten, wenn ein \n"
-"anderes Betriebssystem SILO entfernt hat oder Ihre Hardware-Konfiguration \n"
-"die Verwendung eines BS-Starters nicht korrekt verarbeitet. \n"
-"Eine individuelle Startdiskette kann auch in Verbindung mit der \n"
-"Mandrake Linux Rettungsdiskette verwendet werden, wodurch das System \n"
-"nach schwerwiegenden Fehlern viel einfacher wiederhergestellt werden \n"
-"kann.\n"
"\n"
-"Falls Sie eine Startdiskette erstellen wollen, legen Sie eine Diskette \n"
-"ohne relevante Daten in ihr erstes Laufwerk und drĂŒcken Sie „OK“."
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr ""
-"Sie können den Betriebssystemstarter\n"
-"nicht auf einer %s Partition installieren!\n"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "not enough room in /boot"
-msgstr "Sie haben nicht genug Platz in „/boot“"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "In %d Sekunden wird das gew„hlte BS automatisch gestartet."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "Kommando vorher editieren, mit <c> erhalten Sie eine Kommandozeile."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Zum Starten des BS drcken Sie <Return>. Mit <e> k”nnen Sie das"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Verwenden Sie die Tasten %c und %c um ein Betriebssystem zu w„hlen."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Willkommen zum Betriebssystem-Starter GRUB!"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "LILO with text menu"
-msgstr "LILO mit TextmenĂŒ"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO mit grafischem MenĂŒ"
+"Drucker, die mit den PPD-Dateien ihrer Hersteller oder CUPS-spezifischen "
+"Treibern eingerichtet wurden, können nicht ĂŒbertragen werden."
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Sri Lanka"
+msgstr "Sri Lanka"
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"The following printer\n"
"\n"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
-"Willkommen zum Betriebssystem-Starter %s\n"
-"\n"
-"Markieren Sie in obiger Liste ein Betriebssystem\n"
-"oder warten Sie %d Sekunden, dann starte ich Ihr Standard-System.\n"
+"Die folgenden Drucker\n"
"\n"
+"%s%s\n"
+"sind direkt an Ihr System angeschlossen"
-#: ../../common.pm:1
-#, c-format
-msgid "consolehelper missing"
-msgstr "Das Programm „consolehelper“ wurde nicht gefunden."
-
-#: ../../common.pm:1
-#, c-format
-msgid "kdesu missing"
-msgstr "Ich kann „kdesu“ nicht finden!"
-
-#: ../../common.pm:1
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Die Bildschirm-SchnappschĂŒsse liegen nach der Installation unter „%s“"
-
-#: ../../common.pm:1
-#, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr ""
-"Vor der Partitionierung kann ich keine Bildschirm-SchnappschĂŒsse machen."
-
-#: ../../common.pm:1
-#, c-format
-msgid "%d seconds"
-msgstr "%d Sekunden"
-
-#: ../../common.pm:1
-#, c-format
-msgid "1 minute"
-msgstr "1 Minute"
-
-#: ../../common.pm:1
-#, c-format
-msgid "%d minutes"
-msgstr "%d Minuten"
-
-#: ../../common.pm:1
-#, c-format
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm:1
-#, c-format
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm:1
-#, c-format
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm:1
-#, c-format
-msgid "KB"
-msgstr "KB"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "United States"
-msgstr "Vereinigte Staaten von Amerika"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Austria"
-msgstr "Östereich"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "Italy"
-msgstr "Italien"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "Netherlands"
-msgstr "Holland"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Sweden"
-msgstr "Schweden"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Norway"
-msgstr "Norwegen"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Greece"
-msgstr "Griechenland"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Germany"
-msgstr "Deutschland"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Czech Republic"
-msgstr "Tschechische Republik"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "Belgium"
-msgstr "Belgien"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "France"
-msgstr "Frankreich"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Fehler beim Öffnen von %s zum Schreiben: %s"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "Nothing to do"
-msgstr "Nichts zu tun."
-
-# ../../diskdrak1
-#: ../../fsedit.pm:1
-#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Nicht genug freier Platz, damit ich selbst Partition anlegen kann."
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-"Sie können kein verschlĂŒsseltes Medium fĂŒr den EinhĂ€ngpunkt %s verwenden."
-
-#: ../../fsedit.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-"Sie benötigen ein echtes GNU/Linux Dateisystem (Ext2/Ext3, ReiserFS, XFS "
-"oder JFS) fĂŒr diesen EinhĂ€ngpunkt.\n"
+msgid "Central African Republic"
+msgstr "Zentralafrikanische Republik"
-#: ../../fsedit.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Dieses Verzeichnis muss in der Verzeichnisbaumwurzel bleiben"
+msgid "Gateway device"
+msgstr "Gateway GerÀt"
-#: ../../fsedit.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
+msgid "Net Method:"
msgstr ""
-"Sie können kein logisches LVM Medium fĂŒr den EinhĂ€ngpunkt %s verwenden."
-#: ../../fsedit.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"Sie haben eine Software-RAID-Partition als Verzeichnisbaumwurzel "
-"ausgewÀhlt. \n"
-"Zur Zeit kann kein Betriebssystemstarter damit ohne Verwendung einer \n"
-"„/boot“-Partition arbeiten. Stellen Sie sicher, dass Sie eine solche \n"
-"Partition erstellen."
+msgid "Ethernetcard"
+msgstr "Netzwerkkarten"
-#: ../../fsedit.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Es gibt bereits eine Partition, mit dem EinhÀngpunkt %s\n"
+msgid "Parameters"
+msgstr "Parameter"
-#: ../../fsedit.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr ""
-"EinhÀngpunkte sollten nur Buchstaben, Ziffern und den Unterstrich unterhalten"
+msgid "Auto-detect"
+msgstr "Autoerkennung"
-#: ../../fsedit.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "EinhĂ€ngpunkte mĂŒssen mit einem / beginnen."
+msgid "Interface:"
+msgstr "Schnittstelle:"
-#: ../../fsedit.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-"Sie können ReiserFS nicht fĂŒr Partitionen verwenden, die kleiner als 32MB "
-"sind!"
+msgid "Select installation class"
+msgstr "Installationsart auswÀhlen"
-#: ../../fsedit.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
+msgid "on CDROM"
msgstr ""
-"Sie können JFS nicht fĂŒr Partitionen verwenden, die kleiner als 16MB sind!"
-#: ../../fsedit.pm:1
+#: ../../network/tools.pm:1
#, c-format
msgid ""
-"I can't read the partition table of device %s, it's too corrupted for me :(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Ich kann die Partitionstabelle von „%s“ nicht verstehen. Sie scheint \n"
-"fehlerhaft zu sein :-(\n"
-"Ich kann fortfahren, indem ich die fehlerhaften Partitionen lösche \n"
-"(dabei gehen ALLE darauf vorhandenen DATEN VERLOREN!). Alternativ können \n"
-"Sie mir jedoch auch verbieten, die Partitionstabelle zu verÀndern.\n"
-"(Folgender Fehler trat auf: „%s“).\n"
-"\n"
-"Sind Sie einverstanden, dass ich die problematischen Partitionen lösche?\n"
-
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
-#, c-format
-msgid "Error"
-msgstr "Fehler"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "server"
-msgstr "Server"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "with /usr"
-msgstr "mit „/usr“"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "simple"
-msgstr "Einfach"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "Enabling swap partition %s"
-msgstr "Swap Partition „%s“ aktivieren"
-
-#: ../../fs.pm:1 ../../partition_table.pm:1
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "Fehler beim AushÀngen von %s: %s"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "Das EinhÀngen der Partition %s in das Verzeichnis %s schlug fehl."
-
-#: ../../fs.pm:1
-#, c-format
-msgid "Mounting partition %s"
-msgstr "Partition „%s“ einhĂ€ngen"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "Checking %s"
-msgstr "Kontrolliere von %s"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatiere Partition „%s“"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Erzeugen und formatieren der Datei %s"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "I don't know how to format %s in type %s"
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
msgstr ""
-"Ich bin nicht in der Lage, %s mit einem Dateisystem vom Typ %s zu "
-"formatieren."
-
-#: ../../fs.pm:1
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatieren von %s schlug Fehl"
+"Das System scheint nicht mit dem Internet verbunden zu sein.\n"
+"Versuchen Sie noch einmal Ihre Verbindung konfigurieren."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"BetĂ€tigen Sie die SchaltflĂ€che „Weiter ->“, wenn Sie alle Partitionen und\n"
-"die darauf befindlichen Daten löschen wollen. Bedenken Sie, dass Sie nach\n"
-"betÀtigen der SchaltflÀche auch an die möglicherweise noch vorhandenen\n"
-"Windows-Daten nicht mehr gelangen werden!\n"
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
"\n"
-"WĂ€hlen Sie „<- ZurĂŒck“, um die Aktion ohne Datenverlust abzubrechen."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
+"Do you really want to continue setting up this printer as you are doing now?"
msgstr ""
-"Bitte wÀhlen Sie die Festplatte, die Sie löschen wollen, um Ihr neues\n"
-"Mandrake Linux zu installieren. Bedenken Sie dabei, dass alle Daten auf\n"
-"dieser Platte nach diesem Schritt unwiederbringlich verloren sind!"
+"Verbinden Sie Ihren Drucker mit einem Linux-Server und lassen Sie Ihre(n) "
+"Windows-Rechner als Client auf ihn zugreifen.\n"
+" \n"
+"Möchten Sie Ihren Drucker wirklich so einrichten, wie Sie es jetzt tun?"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
-msgstr ""
-"Nun bekommen Sie eine Zusammenfassung verschiedener Informationen Ihres\n"
-"Systems. Je nach vorhandener Hardware sehen Sie hier (oder eben nicht) die\n"
-"folgende EintrÀge. Jeder Eintrag besteht aus einem konfigurierbaren GerÀt\n"
-"gefolgt vom dessen aktuellen Zustand. Durch betÀtigen der SchaltflÀche\n"
-"„Konfigurieren“ können Sie diesen Ă€ndern.\n"
-"\n"
-" * „Tastatur“: Kontrollieren Sie die aktuelle Tastaturvorgabe und wĂ€hlen\n"
-"Sie die SchaltflÀche, falls Sie die Vorgabe Àndern wollen.\n"
-"\n"
-" * „Staat“: „Staat“: Kontrollieren Sie, ob die Auswahl des Staates, in dem\n"
-"Sie sich befinden korrekt ist. Falls nicht, betÀtigen Sie bitte die\n"
-"SchaltflĂ€che „Konfigurieren“ und wĂ€hlen Sie den richtigen. Ist Ihr Staat\n"
-"nicht in der Liste, die Sie gezeigt bekommen, können Sie ĂŒber die\n"
-"SchaltflĂ€che „Mehr“ eine vollstĂ€ndigere Liste erzwingen.\n"
-"\n"
-" * „Zeitzone“: „DrakX“ versucht die Zeitzone anhand des gewĂ€hlten Staates\n"
-"zu setzen. Sollte diese Auswahl nicht korrekt sein (manche Staaten etwa\n"
-"ĂŒberspannen mehrere Zeitzonen) können Sie durch betĂ€tige der SchaltflĂ€che\n"
-"„Konfigurieren“ Ihre lokale Zeitzone setzen.\n"
-"\n"
-" * „Maus“: Kontrollieren Sie die konfigurierte Maus und betĂ€tigen Sie,\n"
-"falls notwendig, die SchaltflÀche.\n"
-"\n"
-" * „Drucker“: Durch Anwahl der SchaltflĂ€che „Konfigurieren“ startet den\n"
-"Druckerassistenten. Weitere Informationen zu diesem Assistenten erhalten\n"
-"Sie im Drucker-Kapitel des „Starter Handbuch“. Das dort vorgestellte\n"
-"Programm entspricht dem wÀhrend der Installation angebotenen.\n"
-"\n"
-" * „Soundkarte“: Falls eine Soundkarte in Ihrem Rechner gefunden wurde,\n"
-"wird sie hier angezeigt. Sollte die von DrakX getroffene Auswahl nicht\n"
-"korrekt sein, betÀtigen Sie einfach die SchaltflÀche, um sie zu\n"
-"korrigieren.\n"
-"\n"
-" * „Grafikumgebung“: DrakX richtet Ihre Grafikumgebung normalerweise in der\n"
-"Auflösung „800×600“ bzw. „1024×768“ ein. Sollte Ihnen das nicht zusagen,\n"
-"können Sie es durch betĂ€tigen der SchaltflĂ€che „Konfigurieren“ Ă€ndern.\n"
-"\n"
-" * „TV-Karte“: Falls eine TV-Karte in Ihrem Rechner gefunden wurde, wird\n"
-"sie hier angezeigt. Falls Sie eine TV-Karte besitzen, die hier nicht\n"
-"richtig erkannt wurde, können Sie versuchen, diese manuell einzurichten.\n"
-"BetĂ€tigen Sie einfach die SchaltflĂ€che „Konfigurieren“.\n"
-"\n"
-" * „ISDN Karte“: Falls eine ISDN Karte in Ihrem Rechner gefunden wurde,\n"
-"wird sie hier angezeigt. Durch Anwahl der SchaltflÀche\n"
-"„Konfigurieren“können Sie die Parameter Ă€ndern.\n"
-"\n"
-" * „Netzwerk“: Falls Sie Ihren Internetzugang oder Ihr lokales Netzwerk nun\n"
-"einrichten wollen, können Sie das hier tun.\n"
-"\n"
-" * „Sicherheitsebene“: Dieser Eintrag ermöglicht es Ihnen, die\n"
-"Sicherheitsebene Ihres Systems zu Ă€ndern, die Sie in einem frĂŒheren\n"
-"Installationsschritt () gewÀhlt haben.\n"
-"\n"
-" * „Firewall“: Falls Sie Ihren Rechner mit dem Internet verbinden wollen,\n"
-"ist es sinnvoll sich vor ungebetenen Eindringlingen durch einrichten einer\n"
-"Firewall zu schĂŒtzen. Lesen Sie das entsprechende Kapitel im „Starter\n"
-"Handbuch“, wenn Sie weitere Informationen benötigen.\n"
-"\n"
-" * „Betriebssystemstarter“: Falls Sie die Konfiguration Ihres\n"
-"Betriebssystemstarters Àndern wollen, wÀhlen Sie diese SchaltflÀche. Es sei\n"
-"angemerkt, dass dieser Punkt sich an fortgeschrittenere Nutzer richtet.\n"
-"\n"
-" * „Dienste“: Sie können hier die Dienste wĂ€hlen, die ab dem Start von\n"
-"Mandrake Linux zur VerfĂŒgung gestellt werden sollen. Wollen Sie den Rechner\n"
-"als Server verwenden, sollten Sie unbedingt einen Blick auf diese Liste\n"
-"werfen."
+msgid "Belarus"
+msgstr "Weißrussland"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
-msgstr ""
-"„Soundkarte“: Falls eine Soundkarte in Ihrem Rechner gefunden wurde, wird\n"
-"sie hier angezeigt. Sollte die von DrakX getroffene Auswahl nicht korrekt\n"
-"sein, betÀtigen Sie einfach die SchaltflÀche, um sie zu korrigieren."
+msgid "Error writing to file %s"
+msgstr "Fehler beim Schreiben in Datei %s"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
msgstr ""
-"Yaboot ist ein BS-Starter fĂŒr NewWorld MacIntosh Rechner. Er kann sowohl\n"
-"GNU/Linux als auch MacOS oder MacOS X starten, falls diese auf Ihrem\n"
-"Rechner installiert sind. Normalerweise werden diese Betriebssysteme alle\n"
-"automatisch gefunden und eingebunden. Sollte dies nicht der Fall sein,\n"
-"können Sie diese hier manuell hinzufĂŒgen. Stellen Sie jedoch sicher, die\n"
-"richtigen Parameter zu verwenden.\n"
-"\n"
-"Die Hauptparameter von yaboot sind:\n"
-"\n"
-" * „Init Nachricht“: Ein Text, der vor der Eingabeaufforderung angezeigt\n"
-"wird.\n"
-"\n"
-" * „Boot GerĂ€t“: Hiermit wird angegeben, wohin die Informationen zum\n"
-"Starten Ihres GNU/Linux Systems geschrieben werden sollen.\n"
-"\n"
-" * „Open Firmware Verzögerung“: Im Gegensatz zu LILO, stehen mit yaboot\n"
-"zwei Verzögerungen zur VerfĂŒgung. Die erste Verzögerung wird in Sekunden\n"
-"angegeben und dient zur Auswahl zwischen CD, OF Boot, MacOS oder Linux.\n"
-"\n"
-" * „BS-Startverzögerung fĂŒr den Kern“: Diese Verzögerung entspricht der\n"
-"LILO Start-Verzögerung. Sie haben nach der Auswahl von GNU/Linux diese\n"
-"Verzögerung (in 0,1 Sekunden Schritten) Zeit, bis der Standardkern geladen\n"
-"wird.\n"
-"\n"
-" * „BS-Start von CD erlauben“: Markieren dieses Punkts erlaubt es Ihnen an\n"
-"der ersten Eingabeaufforderung [C] fĂŒr den Start von CD zu wĂ€hlen.\n"
-"\n"
-" * „Open Firmware Start erlauben“: Markieren dieses Punkts erlaubt es Ihnen\n"
-"an der ersten Eingabeaufforderung [N] fĂŒr den Open Firmware Start zu\n"
-"wÀhlen.\n"
-"\n"
-" * „Standard BS“: Hiermit stellen Sie ein, welches Betriebssystem nach\n"
-"Ablauf der Open Firmware Verzögerung automatisch gestartet werden soll."
+"Der APM-Dienst (apmd) wird von Laptops verwendet, um den Ladestatus \n"
+"der Batterie durch den Syslog-Dienst erfassen zu lassen. Mit seiner \n"
+"Hilfe kann man den Rechner auch rechtzeitig herunterfahren lassen, \n"
+"bevor die Batterien leer sind."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
-msgstr ""
-"Sie können weitere yaboot EintrĂ€ge angeben, etwa fĂŒr andere\n"
-"Betriebssysteme, alternative Kerne oder ein Rettungssystem.\n"
-"\n"
-"FĂŒr ein anderes BS können Sie nur einen Namen und die Start-Partition\n"
-"angeben.\n"
-"\n"
-"FĂŒr Linux gibt es einige Parameter:\n"
-"\n"
-" * „Identifikator“: Es handelt sich um den Namen, den Sie an der yaboot\n"
-"Eingabeaufforderung angeben mĂŒssen, um diese Alternative zu wĂ€hlen.\n"
-"\n"
-" * „Kern“: Der Name des BS-Kerns, den sie starten wollen. Normalerweise\n"
-"handelt es sich um „vmlinuz“ oder eine Variante von „vmlinuz“ mit einer\n"
-"Versionsnummer.\n"
-"\n"
-" * „Verzeichnisbaumwurzel“: Die Verzeichnisbaumwurzel „/“ Ihrer Linux\n"
-"Installation.\n"
-"\n"
-" * „Übergeben“: Auf Apple Hardware, wird die Übergabemöglichkeit weiterer\n"
-"Kernparameter hÀufig verwendet, um die Grafikausgabe richtig zu\n"
-"konfigurieren oder die Tastaturemulation der Mausknöpfe einzuschalten, da\n"
-"klassische Apple-MĂ€use von Hause aus mit 2 fehlenden Maustasten\n"
-"ausgeliefert werden. Hier einige Beispiele:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * „Init-RamDisk“: Dieser Parameter kann entweder verwendet werden, um beim\n"
-"Betriebssystemstart bereits zusĂ€tzliche Kern-Module zur VerfĂŒgung zu haben,\n"
-"ohne dass das Start-GerĂ€t zur VerfĂŒgung steht oder um ein RamDisk Abbild\n"
-"fĂŒr den BS-Start in NotfĂ€llen zur VerfĂŒgung zu haben.\n"
-"\n"
-" * „GrĂ¶ĂŸe der Init-RamDisk“: StandardmĂ€ĂŸig ist eine RamDisk 4096 Bytes\n"
-"groß. Sollten Sie eine grĂ¶ĂŸere RamDisk benötigen, können Sie das mit diesem\n"
-"Parameter einstellen.\n"
-"\n"
-" * „Schreiben/Lesen“: Normalerweise wird die Verzeichnisbaumwurzel zuerst\n"
-"im Nur-Lese-Modus eingehĂ€ngt, um eine Dateisystem-Verifikation durchfĂŒhren\n"
-"zu können, bevor das Betriebssystem seinen Dienst aufnimmt. Diesen Umstand\n"
-"können Sie hier abstellen.\n"
-"\n"
-" * „NoVideo“: Sollte sich die Apple Grafik-Hardware als extrem\n"
-"problematisch erweisen, können Sie diesen Parameter verwenden um im sog.\n"
-"„novideo“-Modus, also im FrameBuffer-Modus zu starten.\n"
-"\n"
-" * „Standard“: WĂ€hlt diesen Eintrag als Standard Linux-Kern, den Sie durch\n"
-"DrĂŒcken von Enter an der yaboot Eingabeaufforderung gestartet bekommen.\n"
-"Wenn Sie die [Tab]-Taste an der Eingabeaufforderung drĂŒcken, erhalten Sie\n"
-"eine Liste der verfĂŒgbaren Alternativen. Der Standardeintrag wird mit einem\n"
-"Stern „*“ markiert."
+msgid "Use tape to backup"
+msgstr "Auf Bandlaufwerk sichern"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"„DrakX“ versucht nun alle IDE Festplatten Ihres Systems zu finden. Unter\n"
-"Anderem sucht „DrakX“ auch nach PCI-SCSI-Karten, die es kennt, um sie\n"
-"automatisch mit dem richtigen Treiber einzubinden.\n"
-"\n"
-"Falls „DrakX“ nicht weiß, welcher Treiber funktioniert, werden Sie gebeten,\n"
-"„DrakX“ zu helfen.\n"
-"\n"
-"Falls „DrakX“ nicht in der Lage ist, die Parameter selbst zu finden, die\n"
-"dem Modul zu ĂŒbergeben sind, mĂŒssen Sie diese angeben.\n"
-"\n"
-"Sie können die benötigten Informationen etwa unter Windows (sofern das auf\n"
-"Ihren Rechner installiert ist) finden, aus den HandbĂŒchern, die sie mit dem\n"
-"Adapter erhalten haben oder von den Web-Seiten des Hardware-Anbieters\n"
-"(sofern Sie einen WWW-Zugang haben)."
+msgid "The following packages are going to be installed"
+msgstr "Die folgenden Pakete werden installiert werden"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
-"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
-msgstr ""
-"Hier können Sie das Drucksystem fĂŒr Ihren Rechner wĂ€hlen. Andere\n"
-"Betriebssysteme bieten Ihnen nur eines, bei Mandrake Linux können Sie\n"
-"zwischen zwei verschiedenen wÀhlen.\n"
-"\n"
-" * „pdq“ - Es steht fĂŒr „print, don't queue“ (engl. fĂŒr „Drucken ohne\n"
-"Warteschlange“). Falls Sie einen Drucker haben, der direkt an Ihrem Rechner\n"
-"hÀngt und Sie keine Netzwerkdrucker verwenden wollen, ist dies das\n"
-"Drucksystem Ihrer Wahl. Es kann zwar auch mit Netzwerkdruckern umgehen, ist\n"
-"dabei aber extrem langsam. WĂ€hlen Sie „pdq“, wenn Sie ein GNU/Linux Neuling\n"
-"sind.\n"
-"\n"
-" * „CUPS“ - Mit dem „Common Unix Printing System“ (engl. fĂŒr „Allgemeines\n"
-"Unix-Drucksystem“) können Sie ebenso gut um auf Ihrem direkt\n"
-"angeschlossenen Drucker drucken, wie auf einem Drucker, der an einem Server\n"
-"auf der anderen Seite der Welt hÀngt. Es ist einfach zu bedienen und kann\n"
-"sowohl als Server als auch als Klient fĂŒr das alte „lpd“-Drucksystem\n"
-"verwendet werden - Es ist somit rĂŒckwĂ€rtskompatibel. Es ist sehr mĂ€chtig,\n"
-"in seiner Grundeinstellung verhĂ€lt es sich jedoch genau wie „pdq“. Wenn Sie\n"
-"einen „lpd“ Server benötigen, mĂŒssen Sie einfach nur den „cups-lpd“ DĂ€mon\n"
-"starten. CUPS bietet grafische Konfigurations- und DruckmenĂŒs.\n"
-"\n"
-"Sie können diese Wahl spÀter immer wieder Àndern, indem Sie PrinterDrake im\n"
-"Mandrake-Kontrollzentrum starten und dort die SchaltflĂ€che „Expertenmodus“\n"
-"betÀtigen."
+msgid "CUPS configuration"
+msgstr "CUPS Konfiguration"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
-msgstr ""
-"LILO und grub sind Betriebssystemstarter fĂŒr GNU/Linux. Diese\n"
-"Installationsphase lÀuft in den meisten FÀllen völlig automatisch ab. DrakX\n"
-"analysiert den Bootsektor und ergreift dann die passenden Maßnahmen:\n"
-"\n"
-" * Findet DrakX einen Windows-Bootsektor, ersetzt es ihn durch einen grub-\n"
-"oder LILO-Bootsektor. Sie erhalten dadurch die Möglichkeit, beim\n"
-"Systemstart zwischen Windows (bzw. anderen Betriebssystemen, sofern\n"
-"vorhanden) und GNU/Linux auszuwÀhlen;\n"
-"\n"
-" * Findet DrakX einen Linux-Bootsektor vor, ersetzt es ihn durch einen\n"
-"neuen;\n"
-"\n"
-"Falls DrakX nicht weiß, wo der Betriebssystemstarter installiert werden\n"
-"soll, wird es Sie um Ihre Meinung bitten.\n"
-"\n"
-"„Boot GerĂ€t“: Normalerweise werden Sie die Voreinstellung nicht Ă€ndern\n"
-"(„Erster Sektor der Platte (MBR)“), Sie können Ihn jedoch auch auf der\n"
-"zweiten Festplatte („/dev/hdb“), oder etwa auf einer Diskette („Auf\n"
-"Diskette“)."
+msgid "Hong Kong"
+msgstr "Hong Kong"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-"Nachdem Sie die allgemeinen BS-Starter Parameter eingestellt haben,\n"
-"bekommen Sie die Liste möglicher Betriebssystemalternativen fĂŒr das\n"
-"StartmenĂŒ gezeigt.\n"
-"\n"
-"Sollte sich auf Ihrem Rechner bereits ein anderes Betriebssystem befinden,\n"
-"so wird dieses - sofern es erkannt wird - automatisch zu dem StartmenĂŒ\n"
-"hinzugefĂŒgt. Hier können Sie noch einige Feineinstellungen fĂŒr die\n"
-"bestehenden Optionen vornehmen. Markieren Sie einen bestehenden Eintrag und\n"
-"betĂ€tigen Sie die SchaltflĂ€che „Ändern“, um ihn anzupassen oder zu löschen;\n"
-"„HinzufĂŒgen“ erzeugt einen neuen Eintrag und „Fertig“ bringt Sie zum\n"
-"nÀchsten Installationsschritt.\n"
-"\n"
-"Möglicherweise wollen Sie auch nicht, dass andere Anwender Zugriff auf die\n"
-"ĂŒbrigen installierten Betriebssysteme bekommen. In diesem Fall können Sie\n"
-"die jeweiligen EintrĂ€ge entfernen, Sie mĂŒssen jedoch selbst fĂŒr\n"
-"Startdisketten sorgen, um diese Systeme erreichen zu können!"
+msgid "Not enough free space to allocate new partitions"
+msgstr "Nicht genug freier Platz, um die neue Partition anlegen zu können."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
-msgstr ""
-"DrakX bietet Ihnen einen Dialog mit verschiedenen Auswahlmöglichkeiten.\n"
-"\n"
-" * „Zu verwendender Betriebssystemstarter“: Hier erhalten Sie drei\n"
-"Alternativen:\n"
-"\n"
-" * „GRUB“: Falls Sie grub (TextmenĂŒ) bevorzugen.\n"
-"\n"
-" * „LILO mit TextmenĂŒâ€œ: Falls Sie LILO mit TextmenĂŒ als Ihren Favoriten\n"
-"ansehen.\n"
-"\n"
-" * „LILO mit grafischem MenĂŒâ€œ: Falls Sie LILO mit seiner grafischen\n"
-"OberflÀche bevorzugen.\n"
-"\n"
-" * „Boot GerĂ€t“: Normalerweise mĂŒssen Sie hier nichts Ă€ndern („/dev/hda“),\n"
-"Sie könnten jedoch den Starter auch auf der zweiten Platte installieren,\n"
-"(„/dev/hdb“) oder sogar auf einer Diskette („/dev/fd0“).\n"
-"\n"
-" * „Wartezeit vorm Starten des Standard Betriebssystems“: Wenn Sie Ihren\n"
-"Rechner neu starten erhalten Sie im MenĂŒ der zur VerfĂŒgung stehenden BSe\n"
-"eine gewisse Zeit um auszuwÀhlen, was Sie starten möchten. Sollten Sie\n"
-"wÀhrend dieser Zeit keine Wahl getroffen haben, wird Ihr Standard-BS\n"
-"gestartet.\n"
-"\n"
-"!! Machen Sie sich klar, dass Sie sich selbst darum kĂŒmmern mĂŒssen,\n"
-"irgendwie Ihr Mandrake Linux-System zu starten, wenn Sie hier keinen\n"
-"Betriebssystemstarter installieren (durch Auswahl von „Überspringen“).\n"
-"Stellen Sie auch sicher, dass Sie wissen was Sie tun, wenn Sie hier\n"
-"Einstellungen verÀndern ... !!\n"
-"\n"
-"Durch wĂ€hlen der SchaltflĂ€che „Fortgeschritten“ erhalten Sie etliche\n"
-"Optionen, die dem fortgeschrittenen Anwender vorbehalten bleiben."
+msgid "Moving"
+msgstr "wechsele"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
-msgstr ""
-"Sie können nun das »root« Passwort fĂŒr Ihr Mandrake Linux System eingeben.\n"
-"Das Passwort muss zweimal eingegeben werden, um sicher zu stellen, dass Sie\n"
-"es korrekt eingegeben haben.\n"
-"\n"
-"»root« ist das Benutzerkennzeichen des Systemadministrators. Er ist der\n"
-"einzige der berechtigt ist, neue Software zu installieren, Systemdateien zu\n"
-"Àndern oder neue Benutzerkennzeichen anzulegen. Kurz gesagt: »root« darf\n"
-"alles! WÀhlen Sie deshalb das Passwort sehr sorgfÀltig aus! Unberechtigter\n"
-"Zugang zu diesem Kennzeichen ist extrem gefĂ€hrlich fĂŒr die IntegritĂ€t Ihres\n"
-"Systems und der darauf enthaltenen Daten. Daher mĂŒssen Sie auch ein\n"
-"Passwort auswĂ€hlen, was nicht leicht zu erraten ist; „DrakX“ teilt Ihnen\n"
-"mit, wenn das Passwort zu einfach ist. Sie sehen, dass es auch möglich ist,\n"
-"kein Passwort zu vergeben. Wir raten Ihnen jedoch dringend davon ab!\n"
-"Glauben Sie nicht, dass nur, weil Sie GNU/Linux geladen haben, Ihre anderen\n"
-"Betriebssysteme vor Fehlern sicher sind. »root« hat keine BeschrÀnkungen.\n"
-"Er könnte beispielsweise unbeabsichtigt erweise alle Daten auf allen\n"
-"Partitionen löschen, weil er unvorsichtigerweise auf die Partitionen selber\n"
-"zugegriffen hat!\n"
-"\n"
-"Das Passwort sollte eine Mischung aus alphanumerischen Zeichen sein und\n"
-"mindestens 8 Zeichen lang. Es sollte niemals irgendwo aufgeschrieben\n"
-"werden.\n"
-"\n"
-"Machen Sie das Passwort aber nicht zu lang oder zu kompliziert: Sie sollten\n"
-"es sich ohne großen Aufwand merken können.\n"
-"\n"
-"Sie mĂŒssen das Passwort zweimal eingeben - ein Tippfehler beim ersten\n"
-"Versuch könnte sonst zu einem Problem werden, da Sie anschließend das\n"
-"„falsche“ Passwort bei der Verbindung mit dem System eingeben mĂŒssten.\n"
-"\n"
-"Wenn Sie wollen, dass der Zugang zu diesem Rechner ĂŒber einen\n"
-"Authentifizierungsserver verwaltet wird, betÀtigen Sie die SchaltflÀche\n"
-"„Fortgeschritten“.\n"
-"\n"
-"Falls in Ihrem Netzwerk LDAP, NIS oder PDC zur Authentifizierung verwendet\n"
-"wird, wĂ€hlen Sie bitte den entsprechenden MenĂŒpunkt. Falls Sie nicht\n"
-"wissen, welches Protokoll Sie verwenden, fragen Sie Ihren\n"
-"Netzwerkadministrator.\n"
+"Drakbackup activities via %s:\n"
"\n"
-"Wenn Sie Probleme haben, sich Passwörter zu merken, können Sie die Option\n"
-"„Kein Passwort“ wĂ€hlen. Dennoch mĂŒssen wir Ihnen von dieser Möglichkeit\n"
-"abraten. Besonders wenn Sie mit Ihrem Rechner stÀndig oder auch nur\n"
-"zeitweise mit dem Internet verbunden sind."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
-"WĂ€hlen Sie bitte den richtigen Anschluss. So ist etwa der unter Windows\n"
-"„COM1“ genannte Anschluss in GNU/Linux unter „ttyS0“ erreichbar."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
-msgstr ""
-"„DrakX“ versucht normalerweise die Anzahl Tasten Ihrer Maus zu erkennen.\n"
-"Sollte das nicht möglich sein, so behandelt es Ihre Maus als\n"
-"Zwei-Tasten-Maus und emuliert die mittlere Taste. Es erkennt ĂŒblicherweise\n"
-"korrekt, ob es sich um eine serielle, eine PS/2- oder um eine USB-Maus\n"
-"handelt.\n"
-"\n"
-"Sollte dies nicht Ihren Vorstellungen entsprechen: WĂ€hlen Sie einfach Ihren\n"
-"Maustyp aus der Liste, die Ihnen angezeigt wird.\n"
-"\n"
-"Sollten Sie einen anderen Maustyp gewÀhlt haben, als DrakX Ihnen vorschlug,\n"
-"können Sie die FunktionstĂŒchtigkeit Ihrer Maus im angezeigten Dialog\n"
-"ĂŒberprĂŒfen. Verwenden Sie auch die Knöpfe und gegebenenfalls das Mausrad,\n"
-"um sicherzustellen, dass die festgelegten Einstellungen funktionieren.\n"
-"Falls nicht, drĂŒcken Sie die [Leertaste] oder die Eingabetaste, um zurĂŒck\n"
-"zum AuswahlmenĂŒ zu gelangen und suchen Sie einen anderen Treiber aus.\n"
-"\n"
-"Es kommt vor, dass MĂ€use mit RĂ€dern nicht korrekt erkannt werden. WĂ€hlen\n"
-"Sie in diesem Fall die richtige Maus aus der vorgegebenen Liste. Stellen\n"
-"Sie sicher, dass Sie auch den Anschluss richtig angegeben haben. Nach\n"
-"betĂ€tigen der SchaltflĂ€che „Weiter->“, wird Ihnen ein Bild der gewĂ€hlten\n"
-"Maus gezeigt. Bewegen Sie RĂ€der und Tasten, um sicherzustellen, dass die\n"
-"Maus richtig erkannt wurde."
+msgid "("
+msgstr "("
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
+"Welcome to The Network Configuration Wizard.\n"
"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
msgstr ""
-"WĂ€hlen Sie Ihre bevorzugte Sprache fĂŒr den Installationsvorgang und\n"
-"Systemlaufzeit. WĂ€hlen Sie zuerst die Region, in der Sie sich befinden,\n"
-"anschließend die Sprache, die Sie sprechen.\n"
-"\n"
-"Durch BetĂ€tigen der SchaltflĂ€che „Fortgeschritten“ erhalten Sie die\n"
-"Möglichkeit, weitere Sprachen auf Ihrem Rechner zu installieren, um diese\n"
-"spÀter verwenden zu können. Wollen Sie etwa Spaniern muttersprachlichen\n"
-"Zugang zu Ihrem System erlauben, wÀhlen Sie Deutsch als Hauptsprache in der\n"
-"Liste und im Fortgeschrittenen-Bereich „Spanisch“.\n"
-"\n"
-"Sie sind nicht auf eine weitere Sprache begrenzt. Sie können so viele\n"
-"auswĂ€hlen, wie Sie wollen, ja sogar alle, indem Sie die SchaltflĂ€che „Alle\n"
-"Sprachen“ verwenden. Das AuswĂ€hlen einer Sprache beeinflusst die\n"
-"installierten Übersetzungen der Programme, Schriften,\n"
-"Rechtschreibkorrekturen, etc. Durch Auswahl des MenĂŒpunkts „Verwende\n"
-"standardmĂ€ĂŸig Unicode“ wird das System als Standardkodierung UTF-8\n"
-"Verwenden. Es sei angemerkt, dass diese FunktionalitÀt momentan noch als\n"
-"experimentell eingestuft ist. Sollten Sie jedoch verschiedene Sprachen\n"
-"auswĂ€hlen, die unterschiedliche Kodierungen notwendig machen wĂŒrden, wird\n"
-"die Unicode-UnterstĂŒtzung auf jeden Fall installiert.\n"
+"Willkommen zum Netzwerk Konfigurationsassistent.\n"
"\n"
-"Um die Spracheinstellungen des ganzen Systems zwischen verschiedenen\n"
-"Sprachen umzuschalten, starten Sie einfach „/usr/sbin/localedrake“ unter\n"
-"dem privilegierten Kennzeichen „root“. Wollen Sie die Einstellungen nur fĂŒr\n"
-"ein Kennzeichen Àndern starten Sie den selben Befehl mit eben diesem\n"
-"Kennzeichen."
+"Ich versuche nun Ihre Internet-/Netzwerk-Verbindung zu konfigurieren.\n"
+"Falls Sie keine Autodetektion wĂŒnschen, entfernen Sie bitte die Markierung.\n"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
-"„DrakX“ sucht aufgrund Ihrer Sprachauswahl das fĂŒr Sie passende\n"
-"Tastaturlayout aus. Möglicherweise haben Sie jedoch eine Tastatur, die\n"
-"nicht dieser Einstellung entspricht: wenn Sie beispielsweise in der Schweiz\n"
-"eine deutsche Tastatur verwenden wollen oder wenn Sie in Québec (dem\n"
-"französischsprachigen Teil Kanadas) eine französischsprachige Tastatur\n"
-"besitzen. WĂ€hlen Sie einfach ein passendes Layout aus der Liste.\n"
-"\n"
-"Sollten Sie eine andere als die zur gewÀhlten Sprache gehörende Tastatur\n"
-"verwenden wollen, wĂ€hlen Sie die SchaltflĂ€che „Mehr“. Sie erhalten dann\n"
-"eine Liste aller unterstĂŒtzten Tastaturen.\n"
-"\n"
-"Sollten Sie sich fĂŒr ein Tastaturlayout einer nicht lateinischen Sprache\n"
-"entschieden haben, werden Sie im nÀchsten Schritt gefragt, mit welcher\n"
-"Tastenkombination Sie zwischen dem von Ihnen gewÀhlten und dem lateinischen\n"
-"Layout umschalten wollen."
+msgid ")"
+msgstr ")"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
-"Dieser Schritt wird nur aufgerufen, wenn mindestens eine GNU/Linux\n"
-"Partition auf Ihren Festplatten gefunden wird.\n"
-"\n"
-"DrakX fragt Sie nun nach der gewĂŒnschten Installationsart. Sie haben die\n"
-"Wahl zwischen einer Aktualisierung einer bereits vorhandenen Mandrake\n"
-"Linux-Version oder einer kompletten Neuinstallation:\n"
-"\n"
-" * „Installieren“: Entfernt komplett Ă€ltere Versionen von Mandrake Linux,\n"
-"die noch installiert sind - um genau zu sein, können Sie je nach aktuellem\n"
-"Inhalt Ihrer Platte auch einige Àltere Linux- oder anderweitige Partitionen\n"
-"unangetastet behalten.\n"
-"\n"
-" * „Aktualisieren“: Mit dieser Variante können Sie eine existierende\n"
-"Mandrake Linux Version aktualisieren. Die Partitionstabellen sowie die\n"
-"persönlichen Verzeichnisse der Anwender bleiben erhalten. Alle anderen\n"
-"Installationsschritte werden wie bei einer Installation ausgefĂŒhrt.\n"
-"\n"
-"Aktualisierungen von Mandrake Linux „8.1“ oder neueren Systemen sollten\n"
-"problemlos funktionieren. Ältere Versionen von Mandrake Linux sollten Sie\n"
-"nicht zu aktualisieren versuchen."
+msgid "Lebanon"
+msgstr "Libanon"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
-"„Staat“: „Staat“: Kontrollieren Sie, ob die Auswahl des Staates, in dem Sie\n"
-"sich befinden korrekt ist. Falls nicht, betÀtigen Sie bitte die\n"
-"SchaltflĂ€che „Konfigurieren“ und wĂ€hlen Sie den richtigen. Ist Ihr Staat\n"
-"nicht in der Liste, die Sie gezeigt bekommen, können Sie ĂŒber die\n"
-"SchaltflĂ€che „Mehr“ eine vollstĂ€ndigere Liste erzwingen."
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Es wurde mehr als eine Windows-Partition gefunden. WĂ€hlen Sie bitte, welche\n"
-"Sie verkleinern wollen, um Platz fĂŒr Ihr neues Mandrake Linux zu schaffen.\n"
-"\n"
-"Die Partitionen werden folgendermaßen aufgelistet: „Linux-Name“,\n"
-"„Windows-Name“, „KapazitĂ€t“.\n"
-"\n"
-"„Linux-Name“ hat folgende Struktur: „Festplattentyp“, „Festplattennummer“,\n"
-"„Partitionsnummer“ (etwa „hda1“).\n"
-"\n"
-"„Festplattentyp“ ist „hd“, falls Ihre Platte eine IDE/ATAPI-Platte ist, und\n"
-"„sd“, wenn es sich um eine SCSI-Platte handelt.\n"
-"\n"
-"„Festplattennummer“ ist immer der Buchstabe hinter dem Festplattentyp. Bei\n"
-"IDE-Platten bedeutet:\n"
-"\n"
-" * „a“ bedeutet „Master-Platte am primĂ€ren IDE-Controller“;\n"
-"\n"
-" * „b“ bedeutet „Slave-Platte am primĂ€ren IDE-Controller“;\n"
-"\n"
-" * „c“ bedeutet „Master-Platte am sekundĂ€ren IDE-Controller“;\n"
-"\n"
-" * „d“ bedeutet „Slave-Platte am sekundĂ€ren IDE-Controller“;\n"
-"\n"
-"Bei SCSI-Platten steht „a“ fĂŒr „niedrigste SCSI-ID“, „b“ fĂŒr\n"
-"„zweitniedrigste SCSI-ID“, etc.\n"
-"\n"
-"„Windows-Name“ ist der Buchstabe, den die Partition unter Windows erhalten\n"
-"wĂŒrde (die erste Partition der ersten Platte heißt „C:“)."
+msgid "Stop"
+msgstr "Stopp"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Sie mĂŒssen nun entscheiden, auf welche(n) Partition(en) Ihr neues Mandrake\n"
-"Linux System installiert werden soll. Falls bereits Partitionen existieren\n"
-"(etwa von einer frĂŒheren Installation von GNU/Linux oder durch das Erzeugen\n"
-"mit einem anderen Partitionierungswerkzeug), können Sie diese verwenden.\n"
-"Anderenfalls mĂŒssen Sie Partitionen definieren.\n"
-"\n"
-"Um Partitionen zu erzeugen mĂŒssen Sie erst eine Festplatte wĂ€hlen. Sie\n"
-"können die Platte wĂ€hlen in dem Sie „hda“ fĂŒr die erste IDE-Platte wĂ€hlen,\n"
-"„sda“ fĂŒr die erste SCSI-Platte, usw.\n"
-"\n"
-"Um die gewÀhlte Platte zu partitionieren stehen folgende Möglichkeiten zur\n"
-"VerfĂŒgung:\n"
-"\n"
-" * „Alles löschen“: BetĂ€tigen dieser SchaltflĂ€che löscht alle Partitionen\n"
-"auf der markierten Festplatte.\n"
-"\n"
-" * „Automatisches Erstellen“: Dieser Punkt aktiviert die automatische ext3-\n"
-"und Swap-Partitionen-Erstellung im ungenutzten Bereich Ihrer Festplatte.\n"
-"\n"
-"„Mehr“: bietet Zugriff auf weitere Möglichkeiten:\n"
-"\n"
-" * „Partitionstabelle schreiben“: Falls Sie Ihre aktuelle Partitionstabelle\n"
-"auf Diskette speichern wollen, falls Sie sie spÀter wiederherstellen\n"
-"wollen, können Sie das mit Hilfe dieser SchaltflÀche tun.\n"
-"\n"
-" * „Partitionstabelle wiederherstellen“: Mit dieser SchaltflĂ€che können Sie\n"
-"eine vorher auf Diskette gesicherte Partitionstabelle wieder herstellen.\n"
-"\n"
-" * „Partitionstabelle retten“: Sollte Ihre Partitionstabelle zerstört\n"
-"worden sein, können Sie versuchen, mit dieser SchaltflÀche eine\n"
-"Restaurierung vorzunehmen. Seien Sie vorsichtig! es ist nicht\n"
-"unwahrscheinlich, dass dieser Versuch fehl schlÀgt.\n"
-"\n"
-" * „Partitionstabelle neu laden“: Alle Änderungen verwerfen und mit der\n"
-"ursprĂŒnglichen Partitionstabelle neu beginnen.\n"
-"\n"
-" * „Wechselmedien automatisch EinhĂ€ngen“: Entfernen dieser Markierung fĂŒhrt\n"
-"dazu, dass die Anwender hinterher die Wechselmedien manuell ein- und\n"
-"aushĂ€ngen mĂŒssen.\n"
-"\n"
-" * „Assistent“: Falls Sie keine Ahnung haben wie Sie die Festplatte\n"
-"partitionieren sollen, wĂ€hlen Sie diese SchaltflĂ€che. Sie ĂŒberlassen damit\n"
-"die gesamte Arbeit unserem Assistenten, der mittels „Abra Kadabra“(TM) Ihre\n"
-"Platte partitioniert.\n"
-"\n"
-" * „RĂŒckgĂ€ngig“: Mit dieser SchaltflĂ€che können Sie alle Einstellungen\n"
-"rĂŒckgĂ€ngig machen.\n"
-"\n"
-" * „In den Experten-/ Normal-Modus wechseln“: Anbieten bzw. Maskieren von\n"
-"Zusatzmöglichkeiten.\n"
-"\n"
-" * „Fertig“: Nachdem Sie das Partitionieren Ihrer Festplatte beendet haben,\n"
-"aktivieren Sie diese SchaltflĂ€che, um Ihre Änderungen zu speichern.\n"
-"\n"
-"Wenn Sie die GrĂ¶ĂŸe einer Partition festlegen wollen, können Sie die\n"
-"Feineinstellungen mit den Rechts- / Links-Pfeiltasten Ihrer Tastatur\n"
-"vornehmen.\n"
-"\n"
-"Information: Sie können alle Einstellungen per Tastatur vornehmen. Mittels\n"
-"[Tab] und den Hoch-/Runter Pfeiltasten bewegen.\n"
-"\n"
-"Wenn eine Partition ausgewÀhlt ist, können Sie mittels:\n"
-"\n"
-" * Ctrl-C - eine neue Partition erstellen (wenn Sie auf einer leeren\n"
-"Partition sind)\n"
-"\n"
-" * Ctrl-D - die Partition löschen\n"
-"\n"
-" * Ctrl-M - dem EinhÀngpunkt festlegen.\n"
-"\n"
-"Um mehr Informationen ĂŒber die verschiedenen Dateisystemtypen zu erhalten,\n"
-"lesen Sie bitte das Kapitel ext2FS in der „Referenz“.\n"
-"\n"
-"Falls Sie die Installation auf einem PPC-Rechner vornehmen, sollten Sie\n"
-"eine mindestens 1MB, große HFS Start-Partition fĂŒr den\n"
-"Betriebssystemstarter yaboot erstellen. Wenn Sie diese Partition etwas\n"
-"grĂ¶ĂŸer dimensionieren, etwa 50MB, haben Sie einen geeigneten Platz, um\n"
-"einen Rettungskern samt RamDisk abzulegen, um in NotfÀllen starten zu\n"
-"können."
+msgid "Edit selected host"
+msgstr "Änderung des markierten Rechners"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Nun ist es an der Zeit, die gewĂŒnschte Sicherheitsebene fĂŒr Ihr System\n"
-"festzulegen. Als Faustregel sollte hier dienen: Je zugÀnglicher die\n"
-"Maschine ist und je kritischer die auf ihr gesicherten Daten sind, desto\n"
-"höher sollte die Sicherheitsebene sein. Andererseits geht die gewonnene\n"
-"Sicherheit zulasten der Benutzerfreundlichkeit und Einfachheit, mit der\n"
-"gewisse Befehle/AblĂ€ufe durchgefĂŒhrt werden können.\n"
-"\n"
-"Sollten Sie sich an dieser Stelle nicht sicher sein, so behalten Sie die\n"
-"Standardeinstellung bei."
+msgid "No CD device defined!"
+msgstr "Kein CD-GerÀt angegeben!"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"Es ist sehr wahrscheinlich, dass zum Zeitpunkt Ihrer Mandrake Linux\n"
-"Installation bereits einige Pakete aktualisiert wurden, etwa da noch Fehler\n"
-"entdeckt und beseitigt wurden oder da in Paketen SicherheitslĂŒcken entdeckt\n"
-"wurden, fĂŒr die bereits Lösungen existieren. Um von diesen aktualisierten\n"
-"Paketen Gebrauch zu machen, wird Ihnen nun angeboten, diese aus dem\n"
-"Internet nachzuladen. BetĂ€tigen Sie die SchaltflĂ€che „Ja“, wenn Sie einen\n"
-"Internetzugang haben, um die Pakete zu installieren, andernfalls betÀtigen\n"
-"Sie die SchaltflĂ€che „Nein“. Sie können diese Pakete natĂŒrlich auch\n"
-"jederzeit nach der Installation noch installieren.\n"
-"\n"
-"BetĂ€tigen der SchaltflĂ€che „Ja“ zeigt Ihnen eine Liste von Servern, von\n"
-"denen Sie die Aktualisierungen herunterladen können. WÀhlen Sie einen in\n"
-"Ihrer NĂ€he. Sie erhalten dann einen Paketauswahldialog: Kontrollieren Sie\n"
-"die Auswahl und bestĂ€tigen Sie diese durch BetĂ€tigen von „Installieren“.\n"
-"Die Pakete werden nun angefordert und installiert. Sollten Sie das nicht\n"
-"wĂŒnschen, betĂ€tigen Sie einfach die SchaltflĂ€che „Abbruch“."
+msgid "Bulgarian (phonetic)"
+msgstr "Bulgarien (Phonetisch)"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
+msgid "The DHCP start ip"
msgstr ""
-"Alle Partitionen, die gerade neu erzeugt wurden, mĂŒssen formatiert werden\n"
-"(d.h. es muss ein Dateisystem auf der Partition erstellt werden), bevor sie\n"
-"verwendet werden können.\n"
-"\n"
-"Sie erhalten hier auch die Möglichkeit bereits existierende Partitionen neu\n"
-"zu formatieren, um die darauf vorhandenen Daten zu löschen. Markieren Sie\n"
-"diese einfach ebenfalls in der Liste.\n"
-"\n"
-"Es sei angemerkt, dass nicht alle Partitionen neu formatiert werden mĂŒssen.\n"
-"Sie sollten normalerweise nur die Partitionen neu formatieren, die\n"
-"Systemdateien, jedoch keine Privatdaten enthalten (etwa „/“, „/usr“ oder\n"
-"„/var“). Partitionen wie etwa „/home“ sollten Sie normalerweise nicht neu\n"
-"formatieren.\n"
-"\n"
-"Seien Sie sorgfÀltig bei der Auswahl der Partitionen. Nach dem Formatieren\n"
-"sind alle zuvor darauf existierenden Daten unwiederbringlich verloren.\n"
-"\n"
-"Wenn Sie alle Einstellungen vorgenommen haben, betÀtigen Sie die\n"
-"SchaltflĂ€che „Weiter ->“, um mit dem Formatieren der Partitionen zu\n"
-"beginnen.\n"
-"\n"
-"BetĂ€tigen Sie „<- ZurĂŒck“, wenn Sie eine andere Partition fĂŒr Ihr neues\n"
-"Mandrake Linux vorgesehen haben.\n"
-"\n"
-"BetĂ€tigen Sie die SchaltflĂ€che „Fortgeschritten“, falls Sie Partitionen auf\n"
-"defekte Blöcke untersuchen wollen."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Nun ist es soweit, die Installation ist abgeschlossen und Ihr neues\n"
-"Betriebssystem sollte einsatzbereit sein. Bei einem Neustart können Sie\n"
-"zwischen den auf Ihrer Platte installierten Betriebssystemen auswÀhlen.\n"
-"Klicken Sie nur noch auf „OK“ und das System wird neu gestartet.\n"
-"\n"
-"Die SchaltflĂ€che „Fortgeschritten“ liefert zwei weitere SchaltflĂ€chen:\n"
-"\n"
-" * „Erstellen einer Auto-Installationsdiskette“: Hiermit können Sie eine\n"
-"Installationsdiskette erstellen, mit deren Hilfe Sie eine identische\n"
-"automatische Installation ohne Interaktion eines Administrators\n"
-"durchzufĂŒhren können.\n"
-"\n"
-" Es gibt zwei verschiedene Alternativen, nachdem Sie diese SchaltflÀche\n"
-"aktiviert haben:\n"
-"\n"
-" * „Erneut abspielen“: Diese Installation ist nur teilweise automatisch,\n"
-"da der Partitionierungsschritt (aber nur dieser!) immer noch interaktiv\n"
-"vonstatten geht.\n"
-"\n"
-" * „Automatisiert“: Vollautomatische Installation: Die Festplatte wird\n"
-"vollstÀndig reorganisiert. Alle darauf vorhandenen Daten gehen verloren!\n"
-"\n"
-" Diese Funktion ist besonders nĂŒtzlich, wenn man eine Menge von\n"
-"identischer Rechner einrichten will. Weitere Informationen erhalten Sie\n"
-"auch auf der Seite Auto install\n"
-"\n"
-" * „Paketauswahl speichern“:(*) Sie speichern damit die Paketauswahl, die\n"
-"Sie vorher getroffen haben. Wenn Sie spÀter eine erneute Installation\n"
-"vornehmen wollen, legen Sie einfach die Diskette ins Laufwerk und starten\n"
-"Sie die Installation mittels [F1] an der ersten Eingabeaufforderung. Geben\n"
-"Sie dann »linux defcfg=\"floppy\"« ein.\n"
-"\n"
-"(*) Sie benötigen eine FAT formatierte Diskette (Mittels „mformat a:“\n"
-"können Sie unter GNU/Linux eine solche erstellen)."
+msgid "256 kB"
+msgstr "256 KB"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"At this point, you need to decide where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space you will\n"
-"have to partition the drive. Basically, partitioning a hard drive consists\n"
-"of logically dividing it to create the space needed to install your new\n"
-"Mandrake Linux system.\n"
-"\n"
-"Because the process of partitioning a hard drive is usually irreversible\n"
-"and can lead to lost data if there is an existing operating system already\n"
-"installed on the drive, partitioning can be intimidating and stressful if\n"
-"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
-"simplifies this process. Before continuing with this step, read through the\n"
-"rest of this section and above all, take your time.\n"
-"\n"
-"Depending on your hard drive configuration, several options are available:\n"
-"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
-"\n"
-" Before choosing this option, please understand that after this\n"
-"procedure, the size of your Microsoft Windows partition will be smaller\n"
-"then when you started. You will have less free space under Microsoft\n"
-"Windows to store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
-"\n"
-" !! If you choose this option, all data on your disk will be deleted. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
-msgstr ""
-"Sie mĂŒssen nun entscheiden, wo auf Ihrer/n Festplatte(n) Ihr Mandrake Linux\n"
-"System installiert werden soll. Sofern alles leer ist bzw. ein\n"
-"Betriebssystem alles belegt, mĂŒssen die Platte(n) neu partitioniert werden.\n"
-"Prinzipiell besteht das Partitionieren der Platte(n) darin, den\n"
-"Plattenplatz so aufzuteilen, dass Ihr Mandrake Linux darauf installiert\n"
-"werden kann.\n"
-"\n"
-"Da dieser Schritt normalerweise irreversibel ist, kann das Partitionieren\n"
-"fĂŒr unerfahrene Anwender unangenehm und stressig sein. Dieser Assistent\n"
-"kann Ihnen diesen Schritt abnehmen. Lesen Sie dennoch vor Beginn im\n"
-"Handbuch die entsprechenden Passagen und lassen Sie sich Zeit mit der\n"
-"Entscheidung.\n"
-"\n"
-"AbhÀngig vom aktuellen Zustand Ihrer Platte(n) haben Sie verschiedene\n"
-"Alternativen:\n"
-"\n"
-" * „Freien Platz verwenden“: Dies fĂŒhrt einfach dazu, dass Ihre leere(n)\n"
-"Festplatte(n) automatisch partitioniert werden; Sie mĂŒssen sich also um\n"
-"nichts weiter kĂŒmmern.(*)\n"
-"\n"
-" * „Verwende existierende“: Der Assistent hat eine oder mehrere\n"
-"existierende Linux Partitionen auf Ihrer Platte gefunden. WĂ€hlen Sie diese\n"
-"SchaltflÀche, falls Sie sie behalten wollen. Sie werden dann gebeten, die\n"
-"EinhÀngpunkte der Partitionen anzugeben. Als Vorgabe erhalten Sie die\n"
-"EinhÀngpunkte der gefundenen Distribution, normalerweise ist es nicht nötig\n"
-"diese zu Àndern.\n"
-"\n"
-" * „Freien Platz der Windows Partition verwenden“: Falls der gesamte\n"
-"Plattenplatz aktuell fĂŒr Microsoft Windows(TM) verschwendet ist, mĂŒssen Sie\n"
-"fĂŒr GNU/Linux Platz schaffen. Um dies zu erreichen, können Sie entweder\n"
-"Ihre Microsoft Windows(TM) Partition(en) samt Daten löschen (siehe\n"
-"„Komplette Platte löschen“) oder Ihre Windows Partition verkleinern.\n"
-"Letzteres geht ohne Datenverlust. Sie sollten diese Variante wÀhlen, falls\n"
-"Sie beide Betriebssysteme (Windows und Mandrake Linux) nebeneinander nutzen\n"
-"wollen.\n"
-"\n"
-" Bevor Sie sich fĂŒr diese Variante entscheiden, sei hier noch einmal\n"
-"betont, dass das bedeutet, Sie haben weniger Platz fĂŒr Windows als\n"
-"momentan.\n"
-"\n"
-" * „Komplette Platte löschen“: Falls Sie alle Daten Ihrer Platte verlieren,\n"
-"und sie durch Ihr neues Mandrake Linux System ersetzen wollen, wÀhlen Sie\n"
-"diese SchaltflĂ€che. Beachten Sie, dass dieser Schritt nicht rĂŒckgĂ€ngig\n"
-"gemacht werden kann.\n"
-"\n"
-" !! Wenn Sie diese Variante wÀhlen, werden alle Ihre Daten auf der Platte\n"
-"gelöscht! !!\n"
-"\n"
-" * „Windows(TM) löschen“: Bei dieser Variante werden alle Windows\n"
-"Partitionen gelöscht und die Platte(n) komplett neu partitioniert.\n"
-"\n"
-" !! Wenn Sie diese Variante wÀhlen, werden alle Ihre Daten auf der Platte\n"
-"gelöscht! !!\n"
-"\n"
-" * „Benutzerdefinierte Partitionierung“: Wenn Sie Ihre Festplatte selber\n"
-"von Hand partitionieren wollen, dann können Sie diese Option wÀhlen. Seien\n"
-"Sie bitte sehr sorgfÀltig, wenn Sie diese Lösung wÀhlen, da Sie zwar alle\n"
-"möglichen Einstellungen vornehmen, aber gleichzeitig auch sehr leicht Daten\n"
-"verlieren können. Diese Option ist nur geeignet, wenn Sie wissen, was Sie\n"
-"tun. Um zu erfahren, wie Sie DiskDrake verwenden können, lesen Sie bitte\n"
-"das Kapitel „Ihre Partitionen verwalten“ im „Starter Handbuch“\n"
-"\n"
-"(*) In Deutschland ist es quasi unmöglich, Komplettrechner mit leeren\n"
-"Festplatten zu erhalten, da laut Gesetz nur Rechner mit BS verkauft werden\n"
-"dĂŒrfen. Diese Regelung stammt noch aus der Zeit, als Politiker nur\n"
-"proprietÀre kommerzielle BSe kannten und sich nicht vorstellen konnten,\n"
-"dass es freie und sogar kostenlose Alternativen gibt. Jeder KĂ€ufer eines\n"
-"Komplettrechners ohne BS wurde quasi mit einem Raubkopierer von Produkten\n"
-"aus Redmond gleichgesetzt."
+msgid "Bootloader main options"
+msgstr "Haupt-Optionen des Betriebssystemstarters"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
msgstr ""
-"Options\n"
-"\n"
-" Sie können direkt bei Betriebssystemstart die grafische Umgebung\n"
-"aktivieren. Durch betĂ€tigen der SchaltflĂ€che „Nein“ wird in eine reine\n"
-"Textumgebung gestartet. Das ist sinnvoll fĂŒr Server oder wenn Sie bei dem\n"
-"Versuch die grafische Umgebung zu konfigurieren erfolglos waren. WĂ€hlen Sie\n"
-"„Ja“, um die grafische Umgebung vorzufinden."
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
-"Falls fĂŒr Ihre Karte verschiedene Server zur VerfĂŒgung stehen, etwa mit und\n"
-"ohne 3D-Beschleunigung, werden Sie gebeten, den zu wÀhlen, der Ihren\n"
-"BedĂŒrfnissen am besten entspricht."
+msgid "Tape"
+msgstr "Bandlaufwerke"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
-msgstr ""
-"Auflösung\n"
-"\n"
-" Sie können hier Auflösung und Farbtiefe fĂŒr Ihre Hardware wĂ€hlen.\n"
-"Entscheiden Sie sich, welche Variante Ihren WĂŒnschen am ehesten entspricht\n"
-"(Sie können diese Angaben natĂŒrlich nach der Installation noch Ă€ndern). Sie\n"
-"können sich einen Eindruck anhand des abgebildeten Monitors bilden."
+msgid "Scanning network..."
+msgstr "Netzwerk durchsuchen ..."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
msgstr ""
-"Monitor\n"
-"\n"
-" DrakX erkennt normalerweise automatisch Ihren Monitor. Sollten dabei\n"
-"Probleme auftreten, können Sie in der hier aufgefĂŒhrten Liste Ihr Modell\n"
-"auswÀhlen."
+"Mit dieser Option sind Sie in der Lage, jede Version Ihres \n"
+"„/etc“ Verzeichnisses wiederherzustellen."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
-"\n"
-"\n"
-"Test\n"
-"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
-"\n"
-"\n"
-"\n"
-"Options\n"
-"\n"
-" You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
-msgstr ""
-"X (das X Window System) ist das Herz der grafischen BenutzeroberflÀche von\n"
-"GNU/Linux. Es bildet die Grundlage fĂŒr die Vielzahl grafischer\n"
-"Benutzerumgebungen, die Mandrake Linux Ihnen anbietet (wie etwa KDE, GNOME,\n"
-"AfterStep oder WindowMaker). Auch hier wird „DrakX“ die Konfiguration\n"
-"soweit wie möglich selbststÀndig vollziehen.\n"
-"\n"
-"Sie erhalten eine Liste möglicher Parameter, mit deren Hilfe Sie die\n"
-"Grafikausgabe Àndern können:\n"
-"\n"
-"Grafikkarte\n"
-"\n"
-" DrakX erkennt normalerweise automatisch Ihre Grafikkarte und richtet sie\n"
-"entsprechend ein. Sollten dabei Probleme auftreten, können Sie in der hier\n"
-"aufgefĂŒhrten Liste Ihr Modell auswĂ€hlen.\n"
-"\n"
-" Falls fĂŒr Ihre Karte verschiedene Server zur VerfĂŒgung stehen, etwa mit\n"
-"und ohne 3D-Beschleunigung, werden Sie gebeten, den zu wÀhlen, der Ihren\n"
-"BedĂŒrfnissen am besten entspricht.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" DrakX erkennt normalerweise automatisch Ihren Monitor. Sollten dabei\n"
-"Probleme auftreten, können Sie in der hier aufgefĂŒhrten Liste Ihr Modell\n"
-"auswÀhlen.\n"
-"\n"
-"\n"
-"\n"
-"Auflösung\n"
-"\n"
-" Sie können hier Auflösung und Farbtiefe fĂŒr Ihre Hardware wĂ€hlen.\n"
-"Entscheiden Sie sich, welche Variante Ihren WĂŒnschen am ehesten entspricht\n"
-"(Sie können diese Angaben natĂŒrlich nach der Installation noch Ă€ndern). Sie\n"
-"können sich einen Eindruck anhand des abgebildeten Monitors bilden.\n"
-"\n"
-"\n"
-"\n"
-"Test\n"
-"\n"
-" DrakX versucht eine Testbild mit denen von Ihnen gewĂŒnschten\n"
-"Einstellungen zu öffnen. Falls Sie wÀhrend des Tests einen Dialog sehen, in\n"
-"dem Sie gefragt werden, ob sie die getroffenen Einstellungen behalten\n"
-"wollen, antworten Sie mit „Ja“, damit DrakX mit dem nĂ€chsten\n"
-"Installationsschritt fortfÀhrt. Sollten Sie die Nachricht nicht sehen,\n"
-"bedeutet das, dass eine oder mehrere getroffene Einstellungen nicht korrekt\n"
-"sind. Nach 12 Sekunden sollten Sie wieder das InstallationsmenĂŒ sehen. Sie\n"
-"können nun die Einstellungen Àndern, bis Sie das Testbild sehen.\n"
-"\n"
-"\n"
-"\n"
-"Options\n"
-"\n"
-" Sie können direkt bei Betriebssystemstart die grafische Umgebung\n"
-"aktivieren. Durch betĂ€tigen der SchaltflĂ€che „Nein“ wird in eine reine\n"
-"Textumgebung gestartet. Das ist sinnvoll fĂŒr Server oder wenn Sie bei dem\n"
-"Versuch die grafische Umgebung zu konfigurieren erfolglos waren. WĂ€hlen Sie\n"
-"„Ja“, um die grafische Umgebung vorzufinden."
+msgid "Malaysia"
+msgstr "Malaysia"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
-"Grafikkarte\n"
-"\n"
-" DrakX erkennt normalerweise automatisch Ihre Grafikkarte und richtet sie\n"
-"entsprechend ein. Sollten dabei Probleme auftreten, können Sie in der hier\n"
-"aufgefĂŒhrten Liste Ihr Modell auswĂ€hlen.\n"
-"\n"
-" Falls fĂŒr Ihre Karte verschiedene Server zur VerfĂŒgung stehen, etwa mit\n"
-"und ohne 3D-Beschleunigung, werden Sie gebeten, den zu wÀhlen, der Ihren\n"
-"BedĂŒrfnissen am besten entspricht."
+msgid "Swiss (French layout)"
+msgstr "Schweiz (französisches Layout)"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
-msgstr ""
-"GNU/Linux arbeitet mit GMT (Greenwich Mean Time) und ĂŒbersetzt diese anhand\n"
-"der Zeitzone in Ihre lokale Zeit.\n"
-"\n"
-"Da Microsoft Windows(TM) nicht sinnvoll mit GMT umgehen kann, mĂŒssen Sie\n"
-"„Nein“ wĂ€hlen, falls Sie auch ein Betriebssystem aus dem Hause Microsoft\n"
-"auf Ihrem Rechner „beherbergen“.\n"
-"\n"
-"Die Verwendung der Option „Automatische Zeit-Synchronisation“ reguliert\n"
-"Ihre Uhr, indem sie Verbindung mit einem Zeitserver im Internet aufnimmt.\n"
-"WĂ€hlen Sie aus der Liste einen Server in Ihrer NĂ€he. Damit die funktioniert\n"
-"benötigen Sie eine stÀndige Internetverbindung."
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "mkraid schlug Fehl (Möglicherweise fehlen die RAID-Tools)"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Als nÀchstes können Sie die Dienste auswÀhlen, die wÀhrend des\n"
-"Betriebssystemstarts aktiviert werden sollen.\n"
-"\n"
-"Hier werden alle Dienste, die nach der aktuellen Installation zum BS-Start\n"
-"zur VerfĂŒgung stehen, angezeigt. Lesen Sie diese Liste sorgfĂ€ltig durch und\n"
-"markieren Sie nur die Dienste, die Sie immer ab dem BS-Start zur VerfĂŒgung\n"
-"haben wollen.\n"
-"\n"
-"Wenn Sie einen Dienst anwÀhlen, erhalten Sie eine kurze ErklÀrung dazu.\n"
-"Wenn Sie nicht sicher sind, ob ein Dienst bzw. Server sinnvoll ist oder\n"
-"nicht, verÀndern Sie am Besten die voreingestellten Markierungen nicht.\n"
-"\n"
-"!! Sollten Sie Ihren Rechner als Server verwenden wollen, so mĂŒssen Sie an\n"
-"dieser Stelle besonders vorsichtig sein: wÀhlen Sie alle Dienste ab, die\n"
-"Sie nicht benötigen. Denken Sie daran, dass etliche Dienste eine\n"
-"potentielle Einbruchstelle in das System von außen darstellen, wenn diese\n"
-"im Serverbetrieb laufen. Also, nur die Dienste einschalten, die Sie\n"
-"wirklich brauchen! !!"
+msgid "Webcam"
+msgstr "Webcams"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
-"„Drucker“: Durch Anwahl der SchaltflĂ€che „Konfigurieren“ startet den\n"
-"Druckerassistenten. Weitere Informationen zu diesem Assistenten erhalten\n"
-"Sie im Drucker-Kapitel des „Starter Handbuch“. Das dort vorgestellte\n"
-"Programm entspricht dem wÀhrend der Installation angebotenen."
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "size of the (second level) cpu cache"
+msgstr "GrĂ¶ĂŸe des Prozessor-Caches (Second Level)."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
-"\n"
-"When configuring your network, the available connections options are:\n"
-"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
-"simple LAN connection (Ethernet).\n"
-"\n"
-"We will not detail each configuration option - just make sure that you have\n"
-"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
-"from your Internet Service Provider or system administrator.\n"
-"\n"
-"You can consult the ``Starter Guide'' chapter about Internet connections\n"
-"for details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection."
-msgstr ""
-"Wenn Sie Ihren Computer mit dem Internet oder mit einem lokalen Netzwerk\n"
-"verbinden wollen, dann betĂ€tigen Sie die SchaltflĂ€che „Weiter ->“. Bitte\n"
-"schalten Sie jedoch zuvor, falls nötig, die dafĂŒr benötigten GerĂ€te ein,\n"
-"damit „DrakX“ sie automatisch erkennen kann. Sollte die automatische\n"
-"Erkennung nicht korrekt erfolgen, können Sie es erneut versuchen, nachdem\n"
-"Sie die Markierung der Option „Autoerkennung benutzen“ entfernt haben.\n"
-"BetĂ€tigung der SchaltflĂ€che „Abbruch“ bringt Sie weiter zum nĂ€chsten\n"
-"Installationsschritt ohne Ihr Netzwerk einzurichten.\n"
-"\n"
-"Zur Auswahl stehen folgende Verbindungsarten: Herkömmliches Modem, ISDN\n"
-"Modem, ADSL Verbindung, Kabelmodem oder eine einfache LAN Verbindung\n"
-"(Ethernet).\n"
-"\n"
-"Wir wollen hier nicht weiter ins Detail gehen, nur soviel: Stellen Sie\n"
-"sicher, dass Sie die nötigen Parameter von Ihrem Internet Provider oder\n"
-"Systemadministrator erhalten haben.\n"
-"\n"
-"Weitere Einzelheiten, die hier bereits hilfreich sein können, erhalten Sie\n"
-"im „Starter Handbuch“. Falls Sie unsicher sind, warten Sie ab, bis die\n"
-"Installation beendet ist und verwenden Sie danach das beschriebene\n"
-"Programm, um Ihre Verbindung einzurichten."
+msgid "Soundcard"
+msgstr "Soundkarten"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
msgstr ""
-"Schlussendlich erhalten Sie (falls Sie sich fĂŒr „Individuelle Paketauswahl“\n"
-"entschieden haben) eine Baumliste aller Pakete die zu den von Ihnen\n"
-"gewĂŒnschten Gruppen gehören. Diese Pakete sind nach Gruppen und\n"
-"Untergruppen klassifiziert. Beim Durchstöbern des Baums, können Sie\n"
-"Gruppen, Untergruppen oder einzelne Pakete markieren oder deren Markierung\n"
-"entfernen.\n"
-"\n"
-"Sobald Sie ein Paket auswÀhlen, erscheint rechts eine kurze Beschreibung.\n"
-"Sobald Sie die Auswahl abgeschlossen haben, bestÀtigen Sie das durch\n"
-"DrĂŒcken der SchaltflĂ€che „Installation“. Nun beginnt die eigentliche\n"
-"Installation. Falls Sie eine Vielzahl von Paketen installieren wollen,\n"
-"können Sie nun getrost einen Kaffee trinken gehen.\n"
-"\n"
-"!! Es kommt vor, dass Server- und Dienst-Pakete angewÀhlt wurden - entweder\n"
-"absichtlich, oder als Paket einer ganzen Gruppe; sollte das der Fall sein,\n"
-"werden Sie nun gefragt, ob Sie diese wirklich installiert haben wollen.\n"
-"Unter Mandrake Linux werden installierte Server und Dienste automatisch\n"
-"beim Betriebssystemstart gestartet. Selbst wenn zum Zeitpunkt, als die\n"
-"Distribution zusammengestellt wurde, keine SicherheitslĂŒcken oder Fehler in\n"
-"diesen Paketen bekannt waren, ist natĂŒrlich nicht auszuschließen, dass\n"
-"spÀter solche Fehler gefunden werden. Sollten Sie also nicht wissen, wovon\n"
-"hier die Rede ist, wĂ€hlen Sie sicherheitshalber lieber „Nein“. Falls Sie\n"
-"mit „Ja“ antworten, werden die Dienste und Server installiert und stehen\n"
-"Ihnen nach der Installation standardmĂ€ĂŸig zur VerfĂŒgung. !!\n"
-"\n"
-"Die Option „Automatische AbhĂ€ngigkeiten“ unterdrĂŒckt nur die Warnungen, die\n"
-"erscheinen, wenn das Installationsprogramm Pakete automatisch markiert, um\n"
-"PaketabhÀngigkeiten aufzulösen, wenn Sie ein Paket auswÀhlen.\n"
-"\n"
-"Das kleine Diskettensymbol am unteren Rand der Liste ermöglicht es Ihnen,\n"
-"die wÀhrend einer vorangegangenen Installation gespeicherte Paketauswahl\n"
-"erneut zu verwenden. Durch BetÀtigen der SchaltflÀche öffnen Sie einen\n"
-"Dialog, der Sie auffordert, die Diskette einzulegen, die die Auswahl der\n"
-"frĂŒheren Installation enthĂ€lt. Um zu erfahren, wie Sie diese Diskette\n"
-"erstellen, lesen Sie bitte den zweiten Tipp des vorangegangenen\n"
-"Installationsschrittes."
+"Verwenden Sie den Befehl „%s <Datei>“, um die Datei <Datei> in der "
+"Kommandozeile auszudrucken.\n"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Nun ist es Zeit sich zu entscheiden, welche Programme Sie auf Ihrem Rechner\n"
-"installieren wollen. Es gibt tausende von Paketen fĂŒr Mandrake Linux, und\n"
-"Sie mĂŒssen sie nicht alle auswendig kennen.\n"
-"\n"
-"Die Pakete sind nach ihrer Verwendung in Gruppen eingeteilt. Diese Gruppen\n"
-"wiederum enthalten vier Abschnitte:\n"
-"\n"
-" * „Arbeitsplatzrechner“: Falls Ihr Rechner als Arbeitsplatzrechner\n"
-"verwendet werden soll, markieren Sie eine oder mehrere Gruppen.\n"
-"\n"
-" * „Entwicklungsplattform“: Falls Sie mit Ihrem Rechner programmieren\n"
-"wollen, sollten Sie diese Gruppe markieren.\n"
-"\n"
-" * „Server“: Wenn Ihre Maschine ein Server werden soll, können Sie hier die\n"
-"wichtigsten Dienste auswÀhlen, die auf Ihren Rechner installiert werden\n"
-"sollen.\n"
-"\n"
-" * „Grafische OberflĂ€che“: WĂ€hlen Sie hier Ihre bevorzugte grafische\n"
-"ArbeitsoberflÀche. Wenn Sie eine grafische OberflÀche verwenden wollen, so\n"
-"mĂŒssen Sie hier zumindest eine Gruppe auswĂ€hlen.\n"
-"\n"
-"Wenn Sie die Maus ĂŒber eine Gruppe bewegen, erhalten Sie einen kurzen\n"
-"erklĂ€renden Text ĂŒber die Gruppe. Falls Sie bei einer Installation alle\n"
-"Markierungen entfernen, erscheint ein Dialog, in dem Sie zwischen\n"
-"verschiedenen Minimalinstallationen wÀhlen können:\n"
-"\n"
-" * „Mit X“ Installiert eine rudimentĂ€re grafische OberflĂ€che;\n"
-"\n"
-" * „Mit minimaler Dokumentation“ Installiert das Basissystem zuzĂŒglich\n"
-"grundlegender Werkzeuge inklusive deren Dokumentation. Dies ist die\n"
-"sinnvollste Wahl fĂŒr eine Serverinstallation.\n"
-"\n"
-" * „Extrem minimale Installation“ Sie erhalten eine komplett „nackte“ 65MB\n"
-"große GNU/Linux-Distribution (speziell auch ohne urpmi!). Es versteht sich\n"
-"von selbst, dass das nur eine Kommandozeileninstallation sein kann.\n"
-"\n"
-"Wenn Sie die SchaltflĂ€che „Fortgeschritten“ anwĂ€hlen, erhalten Sie die\n"
-"Möglichkeit, eine „Individuelle Paketauswahl“ durchzufĂŒhren. Das macht nur\n"
-"Sinn, wenn Sie die Pakete genau kennen oder wenn Sie volle Kontrolle\n"
-"darĂŒber haben wollen, was installiert werden soll.\n"
-"\n"
-"Haben Sie die Installation als „Aktualisierung“ gestartet, können Sie die\n"
-"Markierungen aller Gruppen entfernen, um die Installation neuer Pakete zu\n"
-"vermeiden. Hierdurch werden nur bereits installierte Pakete aktualisiert\n"
-"oder repariert."
+msgid "Level %s\n"
+msgstr "Level %s\n"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
-msgstr ""
-"Da die Mandrake Linux-Distribution stetig wÀchst, wurde sie in mehrere\n"
-"CD-ROMs unterteilt. Es kann daher vorkommen, dass „DrakX“ Pakete von\n"
-"anderen, als der Installations-CD-ROM installieren will. In diesem Fall\n"
-"wird es die aktuelle CD-ROM auswerfen und nach einer anderen fragen."
+msgid "Luxembourg"
+msgstr "Luxemburg"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+" DrakBackup Daemon Report\n"
"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
msgstr ""
-"Sie erhalten die Liste, der auf Ihren Festplatten gefundenen GNU/Linux\n"
-"Partitionen. Sie können die Auswahl des Assistenten beibehalten - sie\n"
-"sollte normalerweise Ihren BedĂŒrfnissen entsprechen. Falls Sie es vorziehen\n"
-"die EinhÀngpunkte selbst zu definieren, denken Sie bitte daran, dass Sie\n"
-"zumindest eine Verzeichnisbaumwurzel („/“) benötigen. WĂ€hlen Sie die\n"
-"Partitionen nicht zu klein, da Sie sonst nicht genĂŒgend Programme\n"
-"installieren können. Wenn Sie Ihre persönlichen Daten auf einer eigenen\n"
-"Partition halten wollen, legen Sie sich eine Partition namens „/home“ an.\n"
-"\n"
-"Die Partitionen werden folgendermaßen aufgelistet: „Name“, „KapazitĂ€t“.\n"
-"\n"
-"„Name“ hat folgende Struktur: „Festplattentyp“, „Festplattennummer“,\n"
-"„Partitionsnummer“ (etwa „hda1“).\n"
-"\n"
-"„Festplattentyp“ ist „hd“, falls Ihre Platte eine IDE/ATAPI-Platte ist, und\n"
-"„sd“, wenn es sich um eine SCSI-Platte handelt.\n"
"\n"
-"„Festplattennummer“ ist immer der Buchstabe hinter dem Festplattentyp. Bei\n"
-"IDE-Platten bedeutet:\n"
-"\n"
-" * „a“ bedeutet „Master-Platte am primĂ€ren IDE-Controller“;\n"
-"\n"
-" * „b“ bedeutet „Slave-Platte am primĂ€ren IDE-Controller“;\n"
-"\n"
-" * „c“ bedeutet „Master-Platte am sekundĂ€ren IDE-Controller“;\n"
-"\n"
-" * „d“ bedeutet „Slave-Platte am sekundĂ€ren IDE-Controller“;\n"
+" DrakBackup DĂ€mon Report\n"
"\n"
-"Bei SCSI-Platten steht „a“ fĂŒr „niedrigste SCSI-ID“, „b“ fĂŒr\n"
-"„zweitniedrigste SCSI-ID“, etc."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
-msgstr ""
-"GNU/Linux ist ein Mehrbenutzer-System, das bedeutet konkret jedes\n"
-"Benutzerkennzeichen hat eigene PrÀferenzen (Grafische Umgebung,\n"
-"Programmeinstellungen, etc.), sowie ein eigenes Heim-Verzeichnis, in dem\n"
-"diese Einstellungen gespeichert werden. Falls Sie mehr wissen wollen,\n"
-"können Sie im „Starter Handbuch“ nachsehen. Sie können mehrere normale\n"
-"Benutzerkonten einrichten, im Gegensatz zum „privilegierten“ Kennzeichen:\n"
-"»root«, das einmalig ist. Im Gegensatz zu »root« können diese normalen\n"
-"Benutzer jedoch nur ihre eigenen Dateien und Konfigurationen verÀndern. Sie\n"
-"können sogar mehrere Benutzerkennzeichen pro Person einrichten, denen Sie\n"
-"Zugang zu Ihrem GNU/Linux-System gewÀhren wollen. Erstellen Sie sich ein\n"
-"eigenes Benutzerkennzeichen, auch wenn Sie der einzige Anwender sind, der\n"
-"diesen Rechner nutzt. Sie sollten nicht stÀndig mit dem privilegierten\n"
-"Kennzeichen arbeiten! Das ist ein hohes Sicherheitsrisiko! Wenn Sie einen\n"
-"schweren Fehler als einfacher Benutzer machen, dann können Sie maximal\n"
-"Daten verlieren, jedoch nicht Ihr gesamtes System unbrauchbar machen.\n"
-"\n"
-"Zuerst geben Sie bitte einen normalen Namen an. Das muss nicht\n"
-"notwendigerweise Ihr richtiger Name sein. „DrakX“ wird das erste Wort, das\n"
-"Sie eingegeben haben, in das Feld „Benutzerkennzeichen“ eintragen. Dies ist\n"
-"der Name, den Sie zum Anmelden fĂŒr dieses Kennzeichen benötigen. NatĂŒrlich\n"
-"können Sie ihn hier nach Belieben verÀndern. Dann geben Sie Ihrem Konto ein\n"
-"Passwort. FĂŒr ein Benutzerkennzeichen ist dieses zwar nicht von so\n"
-"herausragender Bedeutung wie das fĂŒr »root«, doch Sie sollten trotzdem\n"
-"etwas Sorgfalt walten lassen. Immerhin sind es Ihre Daten ...\n"
-"\n"
-"Klicken Sie auf „Benutzer akzeptieren“, um das Kennzeichen zu erstellen.\n"
-"Anschließend können Sie direkt weitere Benutzer hinzufĂŒgen. Wenn Sie alle\n"
-"Kennzeichen erstellt haben, klicken Sie auf „Weiter ->“.\n"
-"\n"
-"Durch Anwahl der SchaltflĂ€che „Fortgeschritten“ haben Sie auch die\n"
-"Möglichkeit, die Standard-Shell dieses Benutzers Àndern (normalerweise ist\n"
-"dies die „Bash“).\n"
-"\n"
-"Wenn Sie alle Kennzeichen erstellt haben, die Sie nutzen wollen, wird Ihnen\n"
-"die Möglichkeit eröffnet, ein Kennzeichen automatisch beim\n"
-"Betriebssystemstart angemeldet zu bekommen. Falls Sie sich fĂŒr diese\n"
-"FunktionalitÀt entscheiden (und wenig Wert auf Sicherheit legen) wÀhlen Sie\n"
-"einfach die gewĂŒnschte Arbeitsumgebung und das Kennzeichen aus. BestĂ€tigen\n"
-"Sie Ihre Auswahl durch betĂ€tigen der SchaltflĂ€che „Weiter ->“. Andernfalls\n"
-"löschen Sie einfach die Markierung des Punktes „Möchten Sie diese\n"
-"Möglichkeit nutzen?“."
+msgid "Iran"
+msgstr "Iran"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
-msgstr ""
-"Lesen Sie bitte aufmerksam die Lizenz, bevor Sie fortfahren. Sie umfasst\n"
-"die gesamte Mandrake Linux Distribution. Sollten Sie nicht in allen Punkten\n"
-"zustimmen, betĂ€tigen Sie bitte die SchaltflĂ€che „ZurĂŒckweisen“, um die\n"
-"Installation abzubrechen. Um mit der Installation fortzufahren, betÀtigen\n"
-"Sie die SchaltflĂ€che „Akzeptieren“."
+msgid "Bus"
+msgstr "Bus"
-#: ../../install2.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You must also format %s"
-msgstr "Sie mĂŒssen auch %s formatieren."
+msgid "Iraq"
+msgstr "Irak"
-#: ../../install2.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
+msgid "Potential LAN address conflict found in current config of %s!\n"
msgstr ""
-"Ich kann die Kernmodule, die zu diesem Kern passen, nicht finden (Datei %s "
-"fehlt). Das bedeutet normalerweise das Ihre Startdiskette nicht mit dem "
-"Installationsmedium ĂŒbereinstimmt (Bitte erstellen Sie eine neue "
-"Startdiskette). "
+"Es liegt ein möglicher LAN-Adressen Konflikt in der Konfiguration\n"
+"von %s vor!\n"
-#: ../../install_any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Ein Fehler ist aufgetreten - es wurden keine gĂŒltigen GerĂ€te gefunden, auf "
-"denen neue Dateisysteme erstellt werden können. Bitte ĂŒberprĂŒfen Sie Ihre "
-"Hardware(-Konfiguration) auf mögliche Fehler und falsche Einstellungen."
+msgid "Configuring..."
+msgstr "Konfigurieren ..."
-#: ../../install_any.pm:1 ../../partition_table.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Error reading file %s"
-msgstr "Fehler beim Lesen der Datei %s"
+msgid "The setup has already been done, and it's currently enabled."
+msgstr "Die Einstellungen wurden bereits vorgenommen und sind aktiv."
-#: ../../install_any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
msgstr ""
-"Um diese gespeicherte Paketauswahl zu verwenden, starten Sie die \n"
-"Installation bitte mit: „boot defcfg=floppy“"
-
-#: ../../install_any.pm:1
-#, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "Diese Diskette ist nich FAT formatiert"
+"FĂŒr die meisten modernen TV-Karten erkennt das bttv-Modul des Linux Kerns "
+"automatisch die richtigen Parameter.\n"
+"Falls Ihre Karte falsch erkannt wird, können Sie Tuner- und Kartentyp hier "
+"eintellen. Geben Sie einfach die benötigten Parameter an."
-#: ../../install_any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Legen Sie eine leere, FAT formatierte Diskette in Laufwerk %s ein."
+msgid "Password (again)"
+msgstr "Passwort (erneut)"
-#: ../../install_any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
-"Ich kann kein Broadcast machen,\n"
-"da keine NIS DomÀne angegeben wurde"
+msgid "Search installed fonts"
+msgstr "Suche installierte Schriften"
-#: ../../install_any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-"Folgende Pakete werden entfernt, um das Aktualisieren Ihres Rechners zu "
-"ermöglichen: %s\n"
-"\n"
-"\n"
-"Wollen Sie diese Pakete wirklich entfernen?\n"
+msgid "Venezuela"
+msgstr "Venezuela"
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "No"
-msgstr "Nein"
+msgid "IP address"
+msgstr "IP Adresse"
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Yes"
-msgstr "Ja"
+msgid "Choose the sizes"
+msgstr "WĂ€hlen Sie die GrĂ¶ĂŸen"
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
+"List of data corrupted:\n"
"\n"
-"Do you really want to install these servers?\n"
msgstr ""
-"Sie haben die folgenden Server ausgewÀhlt: %s\n"
-"\n"
-"\n"
-"Diese Server werden standardmĂ€ĂŸig aktiviert. Sie haben keine bekannten\n"
-"Sicherheitsprobleme, jedoch könnten einige neue entdeckt werden. Stellen\n"
-"Sie deshalb sicher, dass Sie diese Pakete so zeitig wie möglich "
-"aktualisieren.\n"
-"\n"
+"Liste der beschÀdigten Daten:\n"
"\n"
-"Wollen Sie diese Server wirklich installieren?\n"
-
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System configuration"
-msgstr "Systemkonfiguration"
-
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System installation"
-msgstr "Installation"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Bringing down the network"
-msgstr "Netzwerkverbindung trennen"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Bringing up the network"
-msgstr "Netzwerkverbindung herstellen"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Das Partitionieren schlug Fehl: %s"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Der DrakX Partitionierungsassistent fand folgende Lösung:"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "I can't find any room for installing"
-msgstr "Ich finde nicht genug Platz fĂŒr die Installation."
-#: ../../install_interactive.pm:1
+#: ../../network/modem.pm:1
#, c-format
msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
msgstr ""
-"Sie können nun %s partitionieren.\n"
-"Vergessen Sie nicht die Einstellungen mittels ,w` zu speichern, \n"
-"sobald Sie fertig sind."
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use fdisk"
-msgstr "Fdisk verwenden"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Custom disk partitioning"
-msgstr "Benutzerdefinierte Partitionierung"
+"Ihr Modem wird nicht durch das System unterstĂŒtzt.\n"
+"Schauen Sie unter http://www.linmodems.org"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"SÄMTLICHE existierende Partitionen samt der derauf befindlichen Daten \n"
-"auf Laufwerk %s gehen dabei verloren"
+msgid "Choose another partition"
+msgstr "WĂ€hlen Sie eine andere Partition"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Sie haben mehr als eine Festplatte.\n"
-"Auf welche soll GNU/Linux installiert werden?"
+msgid "Current user"
+msgstr "Aktueller Benutzer"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Erase entire disk"
-msgstr "Komplette Platte löschen"
+msgid "Username"
+msgstr "Benutzerkennzeichen"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Windows(TM) löschen"
+msgid "Left \"Windows\" key"
+msgstr "Linke „Windows“-Taste"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr ""
-"Sie haben keine FAT Partition, deren GrĂ¶ĂŸe ich anpassen kann\n"
-"(möglicherweise haben Sie auch einfach nur nichtmehr genĂŒgend\n"
-"freien Speicher)."
+msgid "dhcpd Server Configuration"
+msgstr "dhcpd Server Konfiguration"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
msgstr ""
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT GrĂ¶ĂŸenanpassung schlug Fehl: %s"
-
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Resizing Windows partition"
-msgstr "Errechne die Grenzen des Windows Dateisystems"
+msgid "Guyana"
+msgstr "Guyana"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Resizing"
-msgstr "Neuberechnen der GrĂ¶ĂŸe"
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr "auf dem Novell-Server „%s“, Drucker „%s“"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "partition %s"
-msgstr "Partition %s"
+msgid "Remove a module"
+msgstr "Modul entfernen"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Wieviel Platz benötigen sie noch fĂŒr Windows auf"
+msgid "Password"
+msgstr "Passwort"
-#: ../../install_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"WARNUNG!\n"
+"Arguments: (max, inactive=-1)\n"
"\n"
-"DrakX wird nun die GrĂ¶ĂŸe Ihrer Windows Partition verĂ€ndern.\n"
-"Seien Sie Vorsichtig: Diese Aktion ist gefÀhrlich. Falls Sie es noch\n"
-"nicht getan haben, sollten Sie nun die Installation abbrechen, um\n"
-"scandisk (sowie möglicherweise defrag) unter Windows auf die Partition \n"
-"anzuwenden. Anschließend können Sie die Installation erneut starten.\n"
-"Sie sollten natĂŒrlich generell Sicherheitskopien Ihrer Daten angelegt\n"
-"haben. Falls dies der Fall ist, können Sie mit OK fortfahren."
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
-msgstr ""
-"Ihre Windows-Partition ist zu sehr fragmentiert.\n"
-"Starten Sie bitte erst „defrag“ unter Windows."
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Berechnung der GrĂ¶ĂŸe der Windows Partition"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Das Werkzeug zum VerĂ€ndern der FAT PartitionsgrĂ¶ĂŸe kann mit der \n"
-"Partition nicht arbeiten. Folgender Fehler trat auf:\n"
-"%s"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Bei welcher Partition wollen Sie die GrĂ¶ĂŸe Ă€ndern?"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Den freien Platz der Windows Partition verwenden"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
msgstr ""
-"Sie haben keine FAT Partition, die ich als Loopback verwenden kann\n"
-"(möglicherweise haben Sie auch einfach nur nichtmehr genĂŒgend\n"
-"freien Speicher)."
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Swap partition size in MB: "
-msgstr "GrĂ¶ĂŸe der Auslagerungspartition in MB: "
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Root partition size in MB: "
-msgstr "GrĂ¶ĂŸe der Verzeichnisbaumwurzel-Partition in MB: "
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Choose the sizes"
-msgstr "WĂ€hlen Sie die GrĂ¶ĂŸen"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Auf welche Partition wollen Sie Linux4Win installieren?"
-
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Auf der Windows Partition Loopbacks anlegen"
+msgid "Advanced Configuration"
+msgstr "Expertenkonfiguration"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "There is no existing partition to use"
-msgstr "Es gibt keine existierende Partition, die ich verwenden kann."
+msgid "Scanning on your HP multi-function device"
+msgstr "Scannen auf Ihrem HP MultifunktionsgerÀt"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Use existing partitions"
-msgstr "Verwende existierende Partition(en)"
+msgid "Root"
+msgstr "Verzeichnisbaumwurzel"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nicht genug freier Platz, um die neue Partition anlegen zu können."
+msgid "Choose an existing RAID to add to"
+msgstr "WĂ€hlen Sie einen vorhandenen RAID"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Use free space"
-msgstr "Freien Platz verwenden"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "TĂŒrkei (modernes „Q“ Modell)"
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Sie mĂŒssen eine FAT Partition in „/boot/efi“ eingehĂ€ngt haben."
+msgid "Lilo message not found"
+msgstr "Ich kann die LILO Nachricht nicht finden."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"You don't have a swap partition.\n"
-"\n"
-"Continue anyway?"
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
msgstr ""
-"Sie haben keine Auslagerungspartition\n"
-"\n"
-"Wollen Sie trotzdem fortfahren?"
+"Automatische Neuerstellung der Kern-Header in /boot fĂŒr\n"
+"/usr/include/linux/{autoconf,version}.h"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Sie brauchen eine Verzeichnisbaumwurzel.\n"
-"Erzeugen Sie eine Partition (oder klicken Sie auf eine existierende).\n"
-"WĂ€hlen Sie „EinhĂ€ngpunkt“ und setzen Sie ihn auf „/“"
+msgid "if needed"
+msgstr " falls Nötig "
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Einige Hardware Komponenten Ihres Rechners benötigen „proprietĂ€re“\n"
-"Treiber. Weitere Infos hierzu finden Sie unter: %s"
+msgid "Restore Failed..."
+msgstr "Wiederherstellen fehlgeschlagen..."
-#: ../../install_messages.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Herzlichen GlĂŒckwunsch, die Installation ist abgeschlossen.\n"
-"Entfernen Sie die Startmedien (CD-ROMs / Disketten) und drĂŒcken Sie die "
-"Eingabetaste zum Neustart Ihres Rechners.\n"
-"\n"
-"FĂŒr Informationen zu Sicherheitsaktualisierungen dieser Version von Mandrake "
-"Linux informieren Sie sich bitte unter \n"
-"\n"
-"%s\n"
-"\n"
-"Wie Sie Ihr System warten können, erfahren Sie im Kapitel „Nach der "
-"Installation“ im offiziellen Benutzerhandbuch von Mandrake Linux."
-
-#: ../../install_messages.pm:1
-#, fuzzy, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr "http://www.mandrakelinux.com/en/90errata.php3"
+msgid "/Autodetect _jazz drives"
+msgstr "/_Jazz-Laufwerke automatisch erkennen"
-#: ../../install_messages.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
+"Description:\n"
"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
"\n"
-"Achtung\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
"\n"
-"Bitte lesen Sie die nachfolgenden AusfĂŒhrungen sorgfĂ€ltig. Wenn Sie mit\n"
-"irgendeinem Teil nicht einverstanden sind, dĂŒrfen Sie nicht den Inhalt\n"
-"der folgenden CDs installieren. Klicken Sie auf „ZurĂŒckweisen“, um die\n"
-"Installation ohne Verwendung dieser CDs fortzusetzen.\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
"\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
"\n"
-"Einige Komponenten auf den nachfolgenden CDs unterliegen nicht der GPL\n"
-"oder Àhnlichen Lizenzabkommen. Jede dieser Komponenten unterliegt dann\n"
-"den Bedingungen ihrer eigenen spezifischen Lizenz.\n"
-"Bitte lesen Sie diese Lizenzen sorgfÀltig und nur wenn Sie mit ihnen\n"
-"einverstanden sind, dĂŒrfen Sie die entsprechenden Produkte entsprechend\n"
-"ihrer Lizenz benutzen und weitergeben.\n"
-"Solche Lizenzen verbieten im allgemeinen das Transferieren, Duplizieren\n"
-"(außer fĂŒr Sicherheitskopien), Weitergeben, Decompilieren, Disassamblen\n"
-"oder VerÀndern der Komponente.\n"
-"Jeder Bruch des Lizenzabkommens beendet sofort die Ihnen im Rahmen der\n"
-"Lizenz eingerÀumten Rechte. Wenn die jeweilige Lizenz Ihnen nicht\n"
-"entsprechende Rechte einrĂ€umt, dĂŒrfen Sie die Programme nicht auf mehr\n"
-"als einem System installieren oder zur Benutzung in einem Netzwerk\n"
-"einrichten. Im Zweifelsfall kontaktieren Sie bitte den Vertreiber oder\n"
-"Herausgeber der jeweiligen Komponente.\n"
-"Transfer an Dritte oder Kopieren solcher Komponenten inklusive ihrer\n"
-"Dokumentation ist normalerweise verboten.\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
"\n"
"\n"
-"Alle Rechte an den Komponenten der nachfolgenden CDs liegen bei den\n"
-"jeweiligen Autoren und sind durch die Urheberrechtsgesetze fĂŒr\n"
-"Softwareprodukte geschĂŒtzt.\n"
+msgstr ""
#: ../../install_messages.pm:1
#, c-format
@@ -4049,7840 +988,9882 @@ msgstr ""
"litige. Pour toute question relative au présent document, veuillez \n"
"contacter MandrakeSoft S.A.\n"
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Beginn von Schritt „%s“\n"
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Help"
-msgstr "Hilfe"
+msgid "Current interface configuration"
+msgstr "Aktuelle Schnittstellenkonfiguration"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "not configured"
-msgstr "Nicht eingerichtet"
+msgid "LPD - Line Printer Daemon"
+msgstr "LPD - Line Printer Daemon"
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Configure"
-msgstr "Konfigurieren"
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
+msgstr ""
+"\n"
+"Falls Sie eine ISA-Karte besitzen, sollten die Einstellungen auf dem "
+"nÀchsten Schirm korrekt sein.\n"
+"\n"
+"Falls Sie eine PCMCIA-Karte besitzen, mĂŒssen Sie IRQ und E/A-Bereich Ihrer "
+"Karte kennen.\n"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Go on anyway?"
-msgstr "Wollen Sie trotzdem fortfahren?"
+msgid "Do not print any test page"
+msgstr "Keine Testseite(n) drucken"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "There was an error installing packages:"
-msgstr "Bei der Installation der Pakete trat ein Fehler auf:"
+msgid "Gurmukhi"
+msgstr "Indien (Gurmukhi)"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Bei der Anforderung folgender Pakete trat ein Fehler auf:"
+msgid "Force No APIC"
+msgstr "No ACPI erzwingen"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
+msgid "This password is too short (it must be at least %d characters long)"
msgstr ""
-"Bitte wechseln Sie die CD!\n"
-"\n"
-"Bitte legen Sie die CD-ROM „%s“ in Ihr Laufwerk,\n"
-"dann drĂŒcken Sie OK.\n"
-"Falls Sie sie nicht vorliegen haben, drĂŒcken Sie Abbruch."
+"Dieses Passwort ist zu einfach (es muss mindestens %d Zeichen lang sein)!"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Refuse"
-msgstr "ZurĂŒckweisen"
+msgid "[keyboard]"
+msgstr "[Tastatur]"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Accept"
-msgstr "Akzeptieren"
+msgid "FTP proxy"
+msgstr "FTP Proxy"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Installing package %s"
-msgstr "Installation des Pakets %s"
+msgid "Install List"
+msgstr "Liste installieren"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "%d packages"
-msgstr "%d Pakete"
-
-#: ../../install_steps_gtk.pm:1
-#, fuzzy, c-format
-msgid "No details"
-msgstr "Details"
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr ""
+"Ändern\n"
+"Pfad wiederherstellen"
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Details"
-msgstr "Details"
+msgid "Show only for the selected day"
+msgstr "Nur fĂŒr diesen Tag zeigen"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Bitte warten, bereite Installation vor"
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
+"\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
+"\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Time remaining "
-msgstr "Verbleibende Zeit "
+msgid "512 kB"
+msgstr "512 KB"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Estimating"
-msgstr "SchÀtzung"
+msgid "Logs"
+msgstr "Logs"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Installing"
-msgstr "Installation wird durchgefĂŒhrt"
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr "(Anmerkung: Parallelports können nicht automatisch erkannt werden)"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Zu installierende Pakete auswÀhlen"
+msgid "<control>N"
+msgstr "<control>N"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Minimal install"
-msgstr "Minimal-Installation"
+msgid "What kind of card do you have?"
+msgstr "Welchen Kartentyp verwenden Sie?"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Updating package selection"
-msgstr "Erneuere Paket Auswahl"
+msgid "<control>O"
+msgstr "<control>O"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
-msgid "Load/Save on floppy"
-msgstr "Laden von/Speichern auf Diskette"
+msgid "Security"
+msgstr "Sicherheit"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "<- Previous"
-msgstr "<- ZurĂŒck"
+msgid ""
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
+msgstr ""
+"Sie können auch das Grafikwerkzeug „xpdq“ zum setzen der Optionen und "
+"Verwalten der Druckjobs verwenden.\n"
+"Falls Sie KDE als ArbeitsoberflÀche nutzen, haben Sie eine Panik-Abschaltung "
+"in Forma des ArbeitsflĂ€chensymbols „STOP Printer!“, dass sofort alle "
+"DruckauftrÀge anhÀ, wenn Sie es betÀgen. Das kann beispielsweise dann "
+"hilfreich sein, wenn Sie einen Papierstau in Ihrem Drucker haben.\n"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Install"
-msgstr "Installation"
+msgid "<control>Q"
+msgstr "<control>Q"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Show automatically selected packages"
-msgstr "Anzeige automatisch markierter Pakete"
+msgid "Unknown"
+msgstr "Unbekannt"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You can't unselect this package. It must be upgraded"
+msgid "This server is already in the list, it cannot be added again.\n"
msgstr ""
-"Sie können dieses Paket nicht aus der Auswahl entfernen. \n"
-"Es muss aktualisiert werden!"
+"Der Rechner ist bereits in der Liste, er kann nicht erneut hinzugefĂŒgt "
+"werden.\n"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#, c-format
+msgid "Network Configuration"
+msgstr "Netzwerk konfigurieren"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>S"
+msgstr "<control>S"
+
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
msgstr ""
-"Dieses Paket muss aktualisiert werden.\n"
-"Sind Sie sicher, dass Sie es aus der Auswahl entfernen wollen?"
+"Protokoll fĂŒr den Rest der Welt \n"
+"ohne D-Kanal (Leased Lines)"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You can't unselect this package. It is already installed"
+msgid "Option %s must be a number!"
+msgstr "Der Parameter %s muss eine Zahl sein!"
+
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#, c-format
+msgid "Notice"
+msgstr "Anmerkung"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
msgstr ""
-"Sie können dieses Paket nicht aus der Auswahl entfernen. \n"
-"Es ist bereits installiert!"
-#: ../../install_steps_gtk.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Dieses Paket ist existenziell, sie können es nicht deselektieren"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "You can't select/unselect this package"
-msgstr "Sie können dieses Paket nicht auswÀhlen/es aus der Auswahl entfernen."
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr "Sie haben Ihre grafische Umgebung nicht konfiguriert. Sind Sie sicher?"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The following packages are going to be removed"
-msgstr "Die folgenden Pakete werden entfernt"
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
+"Die Einrichtung des Druckers wird vollautomatisch erfolgen. Sollte Ihr "
+"Drucker nicht richtig erkannt worden sein oder wollen Sie die Einrichtung "
+"selbst vornehmen, wĂ€hlen Sie „Manuelle Konfiguration“."
-#: ../../install_steps_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The following packages are going to be installed"
-msgstr "Die folgenden Pakete werden installiert werden"
+msgid "What type of partitioning?"
+msgstr "Welcher Partitionstyp?"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You can't select this package as there is not enough space left to install it"
+"file list sent by FTP: %s\n"
+" "
msgstr ""
-"Sie können dieses Paket nicht auswÀhlen, da Sie nicht genug Plattenplatz "
-"haben."
+"Dateiliste gesendet per FTP: %s\n"
+" "
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Importance: %s\n"
-msgstr "Wichtigkeit: %s\n"
+msgid "Interface"
+msgstr "Schnittstelle"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Options Description:\n"
+"\n"
+" - Backup System Files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Backup User Files: \n"
+"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
+"\n"
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane. To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
+"\n"
+msgstr ""
+"Parameter:\n"
+"\n"
+" - Systemdateien sichern:\n"
+" \n"
+"\tDiese Option erlaub es Ihnen Ihr „/etc“ Verzeichnis\n"
+"\tmit den darin enthaltenen Konfigurationsdateien zu\n"
+"\tsichern. Seien Sie vorsichtig, damit Sie wÀhrend der\n"
+"\tWiederherstellung folgende Dateien nicht ĂŒberschreiben:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Benutzerdateien sichern:\n"
+"\n"
+"\tDiese Option erlaubt es Ihnen die Benutzerkenn-\n"
+"\tzeichen zu wÀhlen, deren Daten gesichert werden\n"
+"\tsollen.\n"
+"\tEs ist sinnvoll, die Browser-Caches vom Sichern\n"
+"\tauszunehmen, um Sicherungsplatz zu sparen.\n"
+"\n"
+" - Andere Dateien sichern:\n"
+"\n"
+"\tMit dieser Option können Sie weitere Dateienn\n"
+"\tzum Sichern vorsehen. Sollten Sie diese Version\n"
+"\tverwenden, können Sie momentan keine inkre-\n"
+"\tmentellen Aktualisierungen vornehmen.\n"
+"\n"
+" - Inkrementelle Archivierung:\n"
+"\n"
+"\tInkrementelle Archivierung ist die mÀchtigste\n"
+"\tder vorhandenen Optionen. Sie erlaubt es\n"
+"\tIhnen beim ersten Aufruf eine komplette\n"
+"\tSicherungskopie Ihres Systems zu erstellen und\n"
+"\tanschließnd nur noch Änderungen zu speichern.\n"
+"\tSomit sind Sie in der Lage, wÀhrend des Wieder-\n"
+"\therstellens, den Datenbestand eines bestimmten\n"
+"\tZeitpunkts zu erzeugen.\n"
+"\tSollten sie diese Alernative nicht gewÀhlt haben,\n"
+"\twerden die alten Sicherungen vor dem Ertellen\n"
+"\teiner neuen Sicherungskopie gelöscht.\n"
+"\n"
+"\n"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "Size: %d KB\n"
-msgstr "GrĂ¶ĂŸe: %d KB\n"
+msgid ""
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
+"\n"
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Version: %s\n"
-msgstr "Version: %s\n"
+msgid "comma separated strings"
+msgstr "durch Kommas getrennte Textfelder"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Name: %s\n"
-msgstr "Name: %s\n"
+msgid "These are the machines from which the scanners should be used:"
+msgstr "Das sind die Rechner, fĂŒr die der Scanner zugĂ€nglich sein soll:"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bad package"
-msgstr "UngĂŒltiges Paket"
+msgid "Messages"
+msgstr "Nachrichten"
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Other"
-msgstr "Andere"
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr "Unbekannt|CPH06X (bt878) [Zahlreiche Hersteller]"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "GesamtgrĂ¶ĂŸe: %d / %d MB"
+msgid "POP and IMAP Server"
+msgstr "POP und IMAP Server"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Next ->"
-msgstr "Weiter ->"
+msgid "Mexico"
+msgstr "Mexiko"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Individual package selection"
-msgstr "Individuelle Paketauswahl"
+msgid "Model stepping"
+msgstr "Modell-Staffelung"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Package Group Selection"
-msgstr "Auswahl der Paketgruppen"
+msgid "Rwanda"
+msgstr "Ruanda"
-#: ../../install_steps_gtk.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Ihr Rechner hat nicht genug Ressourcen. Vermutlich werden bei der \n"
-"Installation Probleme auftreten. In diesem Fall sollten Sie eine \n"
-"Text-Installation versuchen. DrĂŒcken Sie dafĂŒr <F1> wĂ€hrend dem \n"
-"Installationsstart und geben Sie „text“ an der Eingabeaufforderung \n"
-"ein."
+msgid "Do you have any %s interfaces?"
+msgstr "VerfĂŒgen Sie ĂŒber %s Schnittstellen?"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Save packages selection"
-msgstr "Paketauswahl speichern"
+msgid "Switzerland"
+msgstr "Schweiz"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Automated"
-msgstr "Automatisiert"
+msgid "Brunei Darussalam"
+msgstr "Brunei "
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Replay"
-msgstr "Erneut abspielen"
+msgid "Remote lpd Printer Options"
+msgstr "Optionen fĂŒr Netzwerk-Druckerspooler"
-#: ../../install_steps_interactive.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
"\n"
-"You may prefer to replay the installation.\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
msgstr ""
-"Die automatische Installation kann, falls Sie wollen,\n"
-"vollautomatisch erfolgen. In diesem Fall wird die\n"
-"Festplatte vollstÀndig durch DrakX rekonfiguriert\n"
-"(diese Möglichkeit ist fĂŒr die Replikation auf anderen\n"
-"Rechnern gedacht).\n"
+"GNU/Linux ist ein Mehrbenutzer-System, das bedeutet konkret jedes\n"
+"Benutzerkennzeichen hat eigene PrÀferenzen (Grafische Umgebung,\n"
+"Programmeinstellungen, etc.), sowie ein eigenes Heim-Verzeichnis, in dem\n"
+"diese Einstellungen gespeichert werden. Falls Sie mehr wissen wollen,\n"
+"können Sie im „Starter Handbuch“ nachsehen. Sie können mehrere normale\n"
+"Benutzerkonten einrichten, im Gegensatz zum „privilegierten“ Kennzeichen:\n"
+"»root«, das einmalig ist. Im Gegensatz zu »root« können diese normalen\n"
+"Benutzer jedoch nur ihre eigenen Dateien und Konfigurationen verÀndern. Sie\n"
+"können sogar mehrere Benutzerkennzeichen pro Person einrichten, denen Sie\n"
+"Zugang zu Ihrem GNU/Linux-System gewÀhren wollen. Erstellen Sie sich ein\n"
+"eigenes Benutzerkennzeichen, auch wenn Sie der einzige Anwender sind, der\n"
+"diesen Rechner nutzt. Sie sollten nicht stÀndig mit dem privilegierten\n"
+"Kennzeichen arbeiten! Das ist ein hohes Sicherheitsrisiko! Wenn Sie einen\n"
+"schweren Fehler als einfacher Benutzer machen, dann können Sie maximal\n"
+"Daten verlieren, jedoch nicht Ihr gesamtes System unbrauchbar machen.\n"
"\n"
-"Vermutlich werden Sie es vorziehen, erneut eine normale\n"
-"Installation durchzufĂŒhren.\n"
+"Zuerst geben Sie bitte einen normalen Namen an. Das muss nicht\n"
+"notwendigerweise Ihr richtiger Name sein. „DrakX“ wird das erste Wort, das\n"
+"Sie eingegeben haben, in das Feld „%s“ eintragen. Dies ist der Name, den\n"
+"Sie zum Anmelden fĂŒr dieses Kennzeichen benötigen. NatĂŒrlich können Sie ihn\n"
+"hier nach Belieben verĂ€ndern. Dann geben Sie Ihrem Konto ein Passwort. FĂŒr\n"
+"ein Benutzerkennzeichen ist dieses zwar nicht von so herausragender\n"
+"Bedeutung wie das fĂŒr »root«, doch Sie sollten trotzdem etwas Sorgfalt\n"
+"walten lassen. Immerhin sind es Ihre Daten ...\n"
+"\n"
+"Klicken Sie auf „%s“, um das Kennzeichen zu erstellen. Anschließend können\n"
+"Sie direkt weitere Benutzer hinzufĂŒgen. Wenn Sie alle Kennzeichen erstellt\n"
+"haben, klicken Sie auf „%s“.\n"
+"\n"
+"Durch Anwahl der SchaltflĂ€che „%s“ haben Sie auch die Möglichkeit, die\n"
+"Standard-Shell dieses Benutzers Ă€ndern (normalerweise ist dies die „Bash“).\n"
+"\n"
+"Wenn Sie alle Kennzeichen erstellt haben, die Sie nutzen wollen, wird Ihnen\n"
+"die Möglichkeit eröffnet, ein Kennzeichen automatisch beim\n"
+"Betriebssystemstart angemeldet zu bekommen. Falls Sie sich fĂŒr diese\n"
+"FunktionalitÀt entscheiden (und wenig Wert auf Sicherheit legen) wÀhlen Sie\n"
+"einfach die gewĂŒnschte Arbeitsumgebung und das Kennzeichen aus. BestĂ€tigen\n"
+"Sie Ihre Auswahl durch betĂ€tigen der SchaltflĂ€che „%s“. Andernfalls löschen\n"
+"Sie einfach die Markierung des Punktes „%s“."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Generate auto install floppy"
-msgstr "Erstellen einer Auto-Installationsdiskette"
+msgid "Configure Internet Access..."
+msgstr "Internet-Zugang konfigurieren"
-#: ../../install_steps_interactive.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Reboot"
-msgstr "Systemneustart"
+msgid "Norway"
+msgstr "Norwegen"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Einige Schritte sind noch nicht komplett.\n"
-"\n"
-"Wollen Sie DrakX wirklich beenden?"
+msgid "Danish"
+msgstr "DĂ€nemark"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Creating auto install floppy..."
-msgstr "Erstellen einer Auto-Installationsdiskette"
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
+msgstr ""
+"Schaltet beim Betriebssystemstart automatisch die „Num“-Taste fĂŒr \n"
+"die virtuellen Konsolen und XFree ein."
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Legen Sie eine leere Diskette in das %s ein."
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+"Bitte geben Sie die IP Parameter dieser Maschine ein.\n"
+"Jeder Eintrag muss als dezimale IP-Adresse in Punktschreibweise \n"
+"angegeben werden (etwa „192.168.1.42“)."
-#: ../../install_steps_interactive.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
msgstr ""
-"Sie mĂŒssen Ihr Open Firmware StartgerĂ€t anpassen, dass es den \n"
-"BS-Starter erkennt. Falls Sie beim Neustart nicht die \n"
-"Eingabeaufforderung des BS-Starters sehen, drĂŒcken Sie \n"
-"Strg-Option-O-F und geben Sie folgendes ein:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-"Tippen Sie dann: shut-down\n"
-"Beim darauffolgenden Neustart sollte Sie die Eingabeaufforderung sehen."
+"Da die Mandrake Linux-Distribution stetig wÀchst, wurde sie in mehrere\n"
+"CD-ROMs unterteilt. Es kann daher vorkommen, dass „DrakX“ Pakete von\n"
+"anderen, als der Installations-CD-ROM installieren will. In diesem Fall\n"
+"wird es die aktuelle CD-ROM auswerfen und nach einer anderen fragen."
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"Die Installation des BS-Starters schlug Fehl. Folgender Fehler trat auf:"
+msgid "Processors"
+msgstr "Prozessoren"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installing bootloader"
-msgstr "Betriebssystemstarter installieren"
+msgid "Bulgaria"
+msgstr "Bulgarien"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Fehler bei der Installation von aboot. Soll ich die Installation \n"
-"mit Gewalt versuchen, auch wenn dies die Zerstörung der ersten \n"
-"Partition verursachen kann?"
+msgid "No NIC selected!"
+msgstr "Keine Netzwerkkarte ausgewÀhlt!"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to use aboot?"
-msgstr "Möchten Sie „aboot“ verwenden?"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr "Svalbard and Jan Mayen Islands (Norwegen)"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
msgstr ""
-"Sie scheinen einen „OldWorld“ oder unbekannten\n"
-"Rechner zu verwenden. Der Betriebssystemstarter\n"
-"„yaboot“ wird daher leider nicht funktionieren.\n"
-"Die Installation wird fortgesetzt, sie werden jedoch \n"
-"„BootX“ verwenden mĂŒssen um LINUX auf Ihrem Rechner\n"
-"zu starten."
+"WĂ€hrend der Konfiguration traten Fehler auf.\n"
+"Kontrollieren Sie Ihre Verbindung mit „net_monitor“ oder dem Mandrake "
+"Kontrollzentrum. Falls die Verbindung nicht funktioniert, sollten Sie erneut "
+"die Konfguration starten."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Preparing bootloader..."
-msgstr "Betriebssystemstarter vorbereiten..."
+msgid "partition %s is now known as %s"
+msgstr "Die Partition %s heißt nun %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Domain Admin Password"
-msgstr "Paswort des Administrators"
+msgid "Backup Other files..."
+msgstr "Andere Dateien sichern ..."
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Domain Admin User Name"
-msgstr "Name des DomÀnenadministrators"
+msgid "SMB server IP"
+msgstr "SMB-Server-IP"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Windows Domain"
-msgstr "Windows DomÀne"
+msgid "Congo (Kinshasa)"
+msgstr "Kongo (Kinshasa)"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Authentication Windows Domain"
-msgstr "Windows DomÀnenauthentifizierung"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "Die Partitionstabelle der Platte „%s“ wird gespeichert!"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Installing HPOJ package..."
+msgstr "Installiere HPOJ Paket..."
+
+#: ../../any.pm:1
#, c-format
msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
msgstr ""
-"Damit dies mit einem Windows 2000-DomÀnen-Controller funktioniert, muss der "
-"Administrator folgendes AusfĂŒhren: „C:\\>net localgroup \"Pre-Windows 2000 "
-"Compatible Access\" everyone /add“. Anschließend muss der Server neu "
-"gestartet werden.\n"
-"Damit Sie Ihren Mandrake Linux Rechner zur Windows(TM) DomĂ€ne hinzufĂŒgen "
-"können, benötigen Sie noch Kennzeichen und Passwort eines "
-"DomÀnenadministrators.\n"
-"Sollte das Netzwerk noch nicht aktiv sein, wird DrakX nach der "
-"Netzwerkkonfiguration versuchen, sich in die DomÀne zu integrieren.\n"
-"Sollte dies schief gehen, und die DomÀnenauthentifizierung funktioniert "
-"nicht, verwenden Sie nach der Instalation von Mandrake Linux folgenden "
-"Befehl: „smbpasswd -j DOMÄNE -U KENNZEICEN%%PASSWORT“, wobei „DOMÄNE“ die "
-"Windows(TM) DomĂ€ne ist, „KENNZEICHEN“ und „PASSWORT“ das Kennzeichen und das "
-"Passwort des DomÀnenadministrators.\n"
-"Mit „wbinfo -t“ können Sie anschließend testetn, ob die Anmeldung "
-"erfolgreich war."
+"Mit einer individuellen Startdiskette können Sie Ihr LINUX-System starten, \n"
+"ohne auf den normalen Betriebssystemstarter angewiesen zu sein. Dies ist "
+"nĂŒtzlich, wenn \n"
+"Sie weder LILO noch Grub auf Ihrem System installieren möchten, wenn ein \n"
+"anderes Betriebssystem Ihren Betriebssystemstarter entfernt hat oder Ihre "
+"Hardware-Konfiguration die Verwendung eines Betriebssystemstarters nicht "
+"korrekt \n"
+"verarbeitet. Eine individuelle Startdiskette kann auch mit der Linux \n"
+"Mandrake Rettungsdiskette verwendet werden, wodurch das System nach \n"
+"schwerwiegenden Fehlern viel einfacher wiederhergestellt werden kann.\n"
+"\n"
+"Möchten Sie jetzt eine Startdiskette fĂŒr Ihr System erstellen?\n"
+"%s"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "NIS Server"
-msgstr "NIS Server"
+msgid ", USB printer \\#%s"
+msgstr ", USB-Drucker \\#%s"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "NIS Domain"
-msgstr "NIS Domain"
+msgid "Latvian"
+msgstr "Lettland"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Authentication NIS"
-msgstr "NIS Authentifizierung"
+msgid "monthly"
+msgstr "monatlich"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "NIS"
-msgstr "NIS"
+msgid "Module name"
+msgstr " Modulname "
-#: ../../install_steps_interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "LDAP Server"
-msgstr "LDAP Server"
+msgid "Start at boot"
+msgstr "Beim BS-Start aktivieren"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental Backups"
+msgstr "Inkrementelle Archivierung (alte Archive nicht ersetzen)"
+
+#: ../../any.pm:1
#, c-format
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
+msgid "First sector of drive (MBR)"
+msgstr "Erster Sektor der Platte (MBR)"
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Authentication LDAP"
-msgstr "LDAP Authentifizierung"
+msgid "Joystick"
+msgstr "Joystick"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LDAP"
-msgstr "LDAP"
+msgid "El Salvador"
+msgstr "El Salvador"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Local files"
-msgstr "Lokale Dateien"
+msgid "Use Unicode by default"
+msgstr "Verwende standardmĂ€ĂŸig Unicode"
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Authentication"
-msgstr "Authentifizierung"
+msgid "the module of the GNU/Linux kernel that handles the device"
+msgstr "Das Linux Kernmodul, das UnterstĂŒtzung fĂŒr dieses GerĂ€t bereitstellt"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr ""
-"Dieses Passwort ist zu einfach (es muss mindestens %d Zeichen lang sein)!"
+msgid "Trying to rescue partition table"
+msgstr "Ich Versuche, die Partitionstabelle zu retten"
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No password"
-msgstr "Kein Passwort"
+msgid "Option %s must be an integer number!"
+msgstr "Der Parameter %s muss eine Zahl sein!"
-#: ../../install_steps_interactive.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Set root password"
-msgstr "Root-Passwort setzen"
+msgid ""
+"Entries you'll have to fill:\n"
+"%s"
+msgstr ""
+"Angaben, die Sie machen mĂŒssen:\n"
+"%s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr "Sie haben Ihre grafische Umgebung nicht konfiguriert. Sind Sie sicher?"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "Ich bin nicht in der Lage, eine Live Aktualisierung durchzufĂŒhren!!!\n"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Dienste: %d aktiviert von %d registrierten."
+msgid "Name: "
+msgstr "Name: "
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Services"
-msgstr "Dienste"
+msgid "16 million colors (24 bits)"
+msgstr "16 Millionen Farben (24 Bit)"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "System"
-msgstr "System"
+msgid "Allow all users"
+msgstr "Allen Benutzern erlauben"
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "%s on %s"
-msgstr "%s (Port %s)"
+#: ../../share/advertising/08-store.pl:1
+#, c-format
+msgid "The official MandrakeSoft Store"
+msgstr "Der offizille MandrakeSoft Laden"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Bootloader"
-msgstr "Betriebssystemstarter"
+msgid "Resizing"
+msgstr "Neuberechnen der GrĂ¶ĂŸe"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Boot"
-msgstr "BS-Start"
+msgid "Cable connection"
+msgstr "Kabel Verbindung"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "disabled"
-msgstr "deaktiviert"
+msgid "User"
+msgstr "Benutzer"
-#: ../../install_steps_interactive.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "activated"
-msgstr "aktiviert"
+msgid ""
+"I can't read the partition table of device %s, it's too corrupted for me :(\n"
+"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
+"The other solution is to not allow DrakX to modify the partition table.\n"
+"(the error is %s)\n"
+"\n"
+"Do you agree to loose all the partitions?\n"
+msgstr ""
+"Ich kann die Partitionstabelle von „%s“ nicht verstehen. Sie scheint \n"
+"fehlerhaft zu sein :-(\n"
+"Ich kann fortfahren, indem ich die fehlerhaften Partitionen lösche \n"
+"(dabei gehen ALLE darauf vorhandenen DATEN VERLOREN!). Alternativ können \n"
+"Sie mir jedoch auch verbieten, die Partitionstabelle zu verÀndern.\n"
+"(Folgender Fehler trat auf: „%s“).\n"
+"\n"
+"Sind Sie einverstanden, dass ich die problematischen Partitionen lösche?\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Firewall"
-msgstr "Firewall"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr ""
+"Erstelle Sicherung vor dem Wiederherstellen (nur fĂŒr inkrementelle "
+"Sicherungen)."
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Security"
-msgstr "Sicherheit"
+msgid "Printer on parallel port \\#%s"
+msgstr "Drucker an Parallelport \\#%s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Security Level"
-msgstr "Sicherheitsebene"
+msgid "Name"
+msgstr "Name"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../raid.pm:1
#, c-format
-msgid "Network"
-msgstr "Netzwerk"
+msgid "mkraid failed"
+msgstr "mkraid schlug Fehl"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Network & Internet"
-msgstr "Netzwerk & Internet"
+msgid "Button 3 Emulation"
+msgstr "Emulation der 3. Taste"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Graphical interface"
-msgstr "Grafikumgebung"
+msgid "Sending files..."
+msgstr "Dateien ĂŒbertragen ..."
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Hardware"
-msgstr "Hardware"
+msgid "Israeli (Phonetic)"
+msgstr "Israel (Phonetisch)"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "TV card"
-msgstr "TV-Karte"
+msgid "access to rpm tools"
+msgstr "Zugriff auf RPM-Werkzeuge"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
+msgid "edit"
msgstr ""
-"Es wurde keine Soundkarte gefunden. Versuchen Sie „harddrake“ nach der "
-"Installation."
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgid "You must choose/enter a printer/device!"
+msgstr "Sie mĂŒssen einen Drucker wĂ€hlen/ein GerĂ€t eingeben!"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Permission problem accessing CD."
msgstr ""
-"Starten Sie „sndconfig“ nach der Installation, um Ihre Soundkarte "
-"einzurichten."
-#: ../../install_steps_interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "VerfĂŒgen Sie ĂŒber eine ISA soundkarte?"
+msgid "Phone number"
+msgstr "Telefonnummer"
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Sound card"
-msgstr "Soundkarte"
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr "Fehler: Es gibt keinen bekannten Treiber fĂŒr Ihre Soundkarte (%s)"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote CUPS server"
-msgstr "CUPS-Server im Netzwerkbetrieb"
+msgid "Printer name, description, location"
+msgstr "Druckername, Beschreibung, Standort"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "No printer"
-msgstr "Kein Drucker"
+msgid "USA (broadcast)"
+msgstr "USA (terrestrisch)"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printer"
-msgstr "Drucker"
+msgid ""
+"Please choose the\n"
+"media for backup."
+msgstr ""
+"Bitte wÀhlen Sie ein\n"
+"Sicherungsmedium."
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Mouse"
-msgstr "Maus"
+msgid "Use Xinerama extension"
+msgstr "Xinerama Erweiterung verwenden"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Timezone"
-msgstr "Zeitzone"
+msgid "Loopback"
+msgstr "Loopback"
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Keyboard"
-msgstr "Tastatur"
+msgid ""
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
+msgstr ""
+"Ich kann „mkbootdisk“ nicht richtig beenden: \n"
+" %s \n"
+" %s"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Summary"
-msgstr "Zusammenfassung"
+msgid "West Europe"
+msgstr "Westeuropa"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "NTP Server"
-msgstr "NTP Server"
+msgid ""
+"[OPTIONS] [PROGRAM_NAME]\n"
+"\n"
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
+msgstr ""
+"[OPTIONEN] [PROGRAMMNAME]\n"
+"\n"
+"OPTIONEN:\n"
+" --help - Asgabe dieses Hilfetextes.\n"
+" --report - Name eines Mandrake Programms.\n"
+" --incident - Name eines Mandrake Programms."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatische Zeit-Synchronisation (durch NTP)"
+msgid "Harddrake2 version %s"
+msgstr "HardDrake Version %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Hardware Uhr liefert GMT"
+msgid "Copying %s"
+msgstr "Kopiere: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Which is your timezone?"
-msgstr "WĂ€hlen Sie Ihre Zeitzone"
+msgid "Choose color"
+msgstr "Farbe einstellen"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Would you like to try again?"
-msgstr "Möchten Sie einen Drucker konfigurieren?"
+#: ../../lang.pm:1
+#, c-format
+msgid "Dominican Republic"
+msgstr "Dominikanische Republik"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Ich kann nicht forken: %s"
+#: ../../lang.pm:1
+#, c-format
+msgid "Swaziland"
+msgstr "Swaziland"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
+msgid "Set-UID"
msgstr ""
-"Verbindung mit dem Mirror aufbauen, um eine Liste verfĂŒgbarer Pakete zu "
-"erhalten."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Bitte wÀhlen Sie einen Mirror, von dem Sie die Pakete holen wollen."
+msgid "Please check if you are using CDRW media"
+msgstr "Kontrollieren Sie, ob Sie ein CDRW-Medium verwenden."
-#: ../../install_steps_interactive.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
msgstr ""
-"Verbindung mit dem Mandrake Linux Web-Server aufbauen, um eine Liste\n"
-"verfĂŒgbarer Pakete zu erhalten."
+"Bitte wÀhlen Sie die Festplatte, die Sie löschen wollen, um Ihr neues\n"
+"Mandrake Linux zu installieren. Bedenken Sie dabei, dass alle Daten auf\n"
+"dieser Platte nach diesem Schritt unwiederbringlich verloren sind!"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Sie haben nun die Möglichkeit Pakete zu installieren, die seit Erscheinen\n"
-"der Distribution aktualisiert wurden. Es handelt sich um \n"
-"Sicherheitsaktualisierungen und Fehlerkorrekturen.\n"
-"\n"
-"Allerdings benötigen Sie dafĂŒr eine funktionierende Internertverbindung.\n"
-"\n"
-"Möchten Sie die Aktualisierungen vornehmen?"
+msgid " on parallel port \\#%s"
+msgstr " an Parallelport \\#%s"
-#: ../../install_steps_interactive.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr ""
-"Bitte legen Sie die Diskette der zu aktualisiernden Module in Laufwerk %s "
-"ein."
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "Verwenden Sie die Tasten %c und %c um ein Betriebssystem zu w„hlen."
-#: ../../install_steps_interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Bitte legen Sie die Startdiskette in Laufwerk %s ein."
+msgid "Generic 2 Button Mouse"
+msgstr "Generische 2 Tasten Maus"
-#: ../../install_steps_interactive.pm:1
+#: ../../lvm.pm:1
#, c-format
-msgid "Post-install configuration"
-msgstr "Einstellungen fĂŒr nach der Installation"
+msgid "Remove the logical volumes first\n"
+msgstr "Entfernen Sie erst die Logischen Medien\n"
-#: ../../install_steps_interactive.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Installiere Paket %s\n"
-"%d%%"
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "In %d Sekunden wird das gew„hlte BS automatisch gestartet."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Preparing installation"
-msgstr "Installation vorbereiten"
+msgid ""
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
+msgstr "Ich kann „/etc/sysconfig/bootsplash“ nicht anlegen."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM „%s“"
+msgid "Internet access"
+msgstr "Internetzugang"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
+"y coordinate of text box\n"
+"in number of characters"
msgstr ""
-"Falls Sie alle aufgefĂŒhrten CDs haben, wĂ€hlen Sie „OK“, \n"
-"falls Sie keine der aufgefĂŒhrten CDs haben, wĂ€hlen Sie „Abbruch“,\n"
-"falls nur einige der aufgefĂŒhrten CDs fehlen, entfernen Sie die \n"
-"entsprechende Markierung und wĂ€hlen Sie dann „OK“."
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "All"
-msgstr "Alle"
+msgid ""
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
+msgstr ""
+"Um eine Liste der Drucker-Parameter Ihres Druckers zu erhalten, betÀtigen "
+"Sie bitte die SchaltflĂ€che „Liste der Drucker-Optionen“."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Extrem minimale Installation (ohne „urpmi“)"
+msgid "Enabling servers..."
+msgstr "Server aktivieren ..."
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Mit minimaler Dokumentation (Empfohlen)"
+msgid "Printing test page(s)..."
+msgstr "Druck der Testseite(n) ..."
-#: ../../install_steps_interactive.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "With X"
-msgstr "Mit X"
+msgid "There is already a partition with mount point %s\n"
+msgstr "Es gibt bereits eine Partition, mit dem EinhÀngpunkt %s\n"
-#: ../../install_steps_interactive.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
+"At this point, you need to decide where you want to install the Mandrake\n"
+"Linux operating system on your hard drive. If your hard drive is empty or\n"
+"if an existing operating system is using all the available space you will\n"
+"have to partition the drive. Basically, partitioning a hard drive consists\n"
+"of logically dividing it to create the space needed to install your new\n"
+"Mandrake Linux system.\n"
+"\n"
+"Because the process of partitioning a hard drive is usually irreversible\n"
+"and can lead to lost data if there is an existing operating system already\n"
+"installed on the drive, partitioning can be intimidating and stressful if\n"
+"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
+"simplifies this process. Before continuing with this step, read through the\n"
+"rest of this section and above all, take your time.\n"
+"\n"
+"Depending on your hard drive configuration, several options are available:\n"
+"\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
+"\n"
+" Before choosing this option, please understand that after this\n"
+"procedure, the size of your Microsoft Windows partition will be smaller\n"
+"then when you started. You will have less free space under Microsoft\n"
+"Windows to store your data or to install new software.\n"
+"\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
+"\n"
+" !! If you choose this option, all data on your disk will be deleted. !!\n"
+"\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
+"\n"
+" !! If you choose this option, all data on your disk will be lost. !!\n"
+"\n"
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
msgstr ""
-"Sie haben keine Paketgruppe ausgewÀhlt\n"
-"Bitte wĂ€hlen Sie die minimale Installation, die Sie wĂŒnschen."
+"Sie mĂŒssen nun entscheiden, wo auf Ihrer/n Festplatte(n) Ihr Mandrake Linux\n"
+"System installiert werden soll. Sofern alles leer ist bzw. ein\n"
+"Betriebssystem alles belegt, mĂŒssen die Platte(n) neu partitioniert werden.\n"
+"Prinzipiell besteht das Partitionieren der Platte(n) darin, den\n"
+"Plattenplatz so aufzuteilen, dass Ihr Mandrake Linux darauf installiert\n"
+"werden kann.\n"
+"\n"
+"Da dieser Schritt normalerweise irreversibel ist, kann das Partitionieren\n"
+"fĂŒr unerfahrene Anwender unangenehm und stressig sein. Dieser Assistent\n"
+"kann Ihnen diesen Schritt abnehmen. Lesen Sie dennoch vor Beginn im\n"
+"Handbuch die entsprechenden Passagen und lassen Sie sich Zeit mit der\n"
+"Entscheidung.\n"
+"\n"
+"AbhÀngig vom aktuellen Zustand Ihrer Platte(n) haben Sie verschiedene\n"
+"Alternativen:\n"
+"\n"
+" * „%s“: Dies fĂŒhrt einfach dazu, dass Ihre leere(n) Festplatte(n)\n"
+"automatisch partitioniert werden; Sie mĂŒssen sich also um nichts weiter\n"
+"kĂŒmmern.(*)\n"
+"\n"
+" * „%s“: Der Assistent hat eine oder mehrere existierende Linux Partitionen\n"
+"auf Ihrer Platte gefunden. WÀhlen Sie diese SchaltflÀche, falls Sie sie\n"
+"behalten wollen. Sie werden dann gebeten, die EinhÀngpunkte der Partitionen\n"
+"anzugeben. Als Vorgabe erhalten Sie die EinhÀngpunkte der gefundenen\n"
+"Distribution, normalerweise ist es nicht nötig diese zu Àndern.\n"
+"\n"
+" * „%s“: Falls der gesamte Plattenplatz aktuell fĂŒr Microsoft Windows(TM)\n"
+"verschwendet ist, mĂŒssen Sie fĂŒr GNU/Linux Platz schaffen. Um dies zu\n"
+"erreichen, können Sie entweder Ihre Microsoft Windows(TM) Partition(en)\n"
+"samt Daten löschen (siehe „Komplette Platte löschen“) oder Ihre Windows\n"
+"Partition verkleinern. Letzteres geht ohne Datenverlust. Sie sollten diese\n"
+"Variante wÀhlen, falls Sie beide Betriebssysteme (Windows und Mandrake\n"
+"Linux) nebeneinander nutzen wollen.\n"
+"\n"
+" Bevor Sie sich fĂŒr diese Variante entscheiden, sei hier noch einmal\n"
+"betont, dass das bedeutet, Sie haben weniger Platz fĂŒr Windows als\n"
+"momentan.\n"
+"\n"
+" * „%s“: Falls Sie alle Daten Ihrer Platte verlieren, und sie durch Ihr\n"
+"neues Mandrake Linux System ersetzen wollen, wÀhlen Sie diese SchaltflÀche.\n"
+"Beachten Sie, dass dieser Schritt nicht rĂŒckgĂ€ngig gemacht werden kann.\n"
+"\n"
+" !! Wenn Sie diese Variante wÀhlen, werden alle Ihre Daten auf der Platte\n"
+"gelöscht! !!\n"
+"\n"
+" * „%s“: Bei dieser Variante werden alle Windows Partitionen gelöscht und\n"
+"die Platte(n) komplett neu partitioniert.\n"
+"\n"
+" !! Wenn Sie diese Variante wÀhlen, werden alle Ihre Daten auf der Platte\n"
+"gelöscht! !!\n"
+"\n"
+" * „%s“: Wenn Sie Ihre Festplatte selber von Hand partitionieren wollen,\n"
+"dann können Sie diese Option wÀhlen. Seien Sie bitte sehr sorgfÀltig, wenn\n"
+"Sie diese Lösung wÀhlen, da Sie zwar alle möglichen Einstellungen\n"
+"vornehmen, aber gleichzeitig auch sehr leicht Daten verlieren können. Diese\n"
+"Option ist nur geeignet, wenn Sie wissen, was Sie tun. Um zu erfahren, wie\n"
+"Sie DiskDrake verwenden können, lesen Sie bitte das Kapitel „Ihre\n"
+"Partitionen verwalten“ im „Starter Handbuch“\n"
+"\n"
+"(*) In Deutschland ist es quasi unmöglich, Komplettrechner mit leeren\n"
+"Festplatten zu erhalten, da laut Gesetz nur Rechner mit BS verkauft werden\n"
+"dĂŒrfen. Diese Regelung stammt noch aus der Zeit, als Politiker nur\n"
+"proprietÀre kommerzielle BSe kannten und sich nicht vorstellen konnten,\n"
+"dass es freie und sogar kostenlose Alternativen gibt. Jeder KĂ€ufer eines\n"
+"Komplettrechners ohne BS wurde quasi mit einem Raubkopierer von Produkten\n"
+"aus Redmond gleichgesetzt."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Type of install"
-msgstr "Installationsklasse"
+msgid "Ukraine"
+msgstr "Ukraine"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Selected size is larger than available space"
-msgstr "GewĂŒnschte GrĂ¶ĂŸe ĂŒbersteigt den verfĂŒgbaren Platz"
+msgid "Application:"
+msgstr "Anwendung:"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Insert a floppy containing package selection"
-msgstr ""
-"Legen Sie eine Diskette ein, auf der Ihre Paketauswahl gespeichert ist."
+msgid "External ISDN modem"
+msgstr "Externes ISDN Modem"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Loading from floppy"
-msgstr "Laden von Diskette ..."
+msgid "if set to yes, report check result by mail."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Package selection"
-msgstr "Auswahl der Pakete"
+msgid "Your choice? (default %s) "
+msgstr "Ihre Wahl? (Standard ‚%s‘) "
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Save on floppy"
-msgstr "Auf Diskette speichern"
+msgid "Trouble shooting"
+msgstr "Fehlerbehandlung"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Load from floppy"
-msgstr "Von Diskette laden"
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid " / Region"
+msgstr "RĂ©union"
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
+"The classic bug sound tester is to run the following commands:\n"
+"\n"
+"\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
+"\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
+"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
+"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
+"\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"\n"
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
-"Bitte wÀhlen Sie, ob die Paketauswahl von Diskette geladen \n"
-"oder darauf gespeichert werden soll. Es handelt sich um das \n"
-"selbe Format, wie die unter „auto_install“ erzeugten Disketten."
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
+"\n"
msgstr ""
-"Es steht auf Ihrem System nicht genĂŒgend Speicherplatz fĂŒr die \n"
-"Installation bzw. Aktualisierung zur VerfĂŒgung (%d > %d)."
+"Die Testseite(n) wurden an den Drucker gesandt.\n"
+"Es kann einen Augenblick dauern, bevor der Drucker seine Arbeit aufnimmt.\n"
+"Druckstatus:\n"
+"%s\n"
+"\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Looking for available packages..."
-msgstr "Suche nach vorhandenen Paketen..."
+msgid "daily"
+msgstr "tÀglich"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Finden der zu aktualisierenden Pakete ..."
+msgid "and one unknown printer"
+msgstr "und ein unbekannter Drucker"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Looking at packages already installed..."
-msgstr "Suche nach bereits installierten Paketen ..."
+msgid "Ireland"
+msgstr "Irland"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "Suche nach vorhandenen Paketen und aktualisieren der RPM-Datenbank ..."
+msgid "kernel version"
+msgstr "Kernversion"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr ""
-"Der Swap-Bereich ist zu klein, um die Installation zu ermöglichen! \n"
-"Bitte vergrĂ¶ĂŸern Sie den Bereich."
+msgid " Restore Configuration "
+msgstr " Konfiguration wiederherstellen "
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Is this the correct setting?"
+msgstr "Ist dies die richtige Einstellung?"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
+"You will now set up your Internet/network connection. If you wish to\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
+"\n"
+"When configuring your network, the available connections options are:\n"
+"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
+"simple LAN connection (Ethernet).\n"
+"\n"
+"We will not detail each configuration option - just make sure that you have\n"
+"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
+"from your Internet Service Provider or system administrator.\n"
+"\n"
+"You can consult the ``Starter Guide'' chapter about Internet connections\n"
+"for details about the configuration, or simply wait until your system is\n"
+"installed and use the program described there to configure your connection."
msgstr ""
-"Es traten Fehler beim Kontrollieren des Dateisystems %s auf. Wollen Sie, "
-"dass ich versuche sie zu beheben? (Achtung: das kann zu Datenverlust fĂŒhren)"
+"Wenn Sie Ihren Computer mit dem Internet oder mit einem lokalen Netzwerk\n"
+"verbinden wollen, dann betĂ€tigen Sie die SchaltflĂ€che „%s“. Bitte schalten\n"
+"Sie jedoch zuvor, falls nötig, die dafĂŒr benötigten GerĂ€te ein, damit\n"
+"„DrakX“ sie automatisch erkennen kann. Sollte die automatische Erkennung\n"
+"nicht korrekt erfolgen, können Sie es erneut versuchen, nachdem Sie die\n"
+"Markierung der Option „%s“ entfernt haben. BetĂ€tigung der SchaltflĂ€che „%s“\n"
+"bringt Sie weiter zum nÀchsten Installationsschritt ohne Ihr Netzwerk\n"
+"einzurichten.\n"
+"\n"
+"Zur Auswahl stehen folgende Verbindungsarten: Herkömmliches Modem, ISDN\n"
+"Modem, ADSL Verbindung, Kabelmodem oder eine einfache LAN Verbindung\n"
+"(Ethernet).\n"
+"\n"
+"Wir wollen hier nicht weiter ins Detail gehen, nur soviel: Stellen Sie\n"
+"sicher, dass Sie die nötigen Parameter von Ihrem Internet Provider oder\n"
+"Systemadministrator erhalten haben.\n"
+"\n"
+"Weitere Einzelheiten, die hier bereits hilfreich sein können, erhalten Sie\n"
+"im „Starter Handbuch“. Falls Sie unsicher sind, warten Sie ab, bis die\n"
+"Installation beendet ist und verwenden Sie danach das beschriebene\n"
+"Programm, um Ihre Verbindung einzurichten."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Check bad blocks?"
-msgstr "Soll ich nach defekten Blöcken suchen?"
+msgid "Wizard Configuration"
+msgstr "AssistentengestĂŒtzte Konfiguration"
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Zu formatierende Partitionen auswÀhlen"
+msgid "Autoprobe"
+msgstr "Automatische Erkennung"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Sie mĂŒssen Ihren Rechner neu starten, um die Änderungen \n"
-"der Partitionstabelle wirksam werden zu lassen."
+msgid "Backup system files..."
+msgstr "Systemdateien sichern ..."
-#: ../../install_steps_interactive.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+msgid "Can't use broadcast with no NIS domain"
msgstr ""
-"Sie haben keinen Platz fĂŒr die 1 MB große Start-Partition vorgesehen! Die "
-"Installation wird fortgesetzt, Sie mĂŒssen jedoch eine Start-Partition mit "
-"DiskDrake erstellen."
+"Ich kann kein Broadcast machen,\n"
+"da keine NIS DomÀne angegeben wurde"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the mount points"
-msgstr "WÀhlen Sie die EinhÀngpunkte"
+msgid "Removing printer \"%s\"..."
+msgstr "Drucker „%s“ entfernen ..."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Durchsuchen der Partitionen, um die EinhÀngpunkte zu finden."
+msgid "drakfloppy"
+msgstr "DrakFloppy"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "No partition available"
-msgstr "Keine Partition verfĂŒgbar"
+msgid ""
+"Please indicate where the auto_install.cfg file is located.\n"
+"\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
+"\n"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "information level that can be obtained through the cpuid instruction"
+msgstr "Iformationsebene, die durch den Befehl CPUID erhalten werden kann."
+
+#: ../../lang.pm:1
#, c-format
-msgid "Configuring IDE"
-msgstr "IDE konfigurieren"
+msgid "Peru"
+msgstr "Peru"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "IDE"
-msgstr "IDE"
+msgid " on device: %s"
+msgstr " an GerÀt: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "PCMCIA Karten konfigurieren ..."
+msgid "Remove Windows(TM)"
+msgstr "Windows(TM) löschen"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr ""
+"Dieser Dienst startet den X-Font-Server. Er ist notwendig, \n"
+"damit XFree gestartet werden kann!"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Button 3 Emulation"
-msgstr "Emulation der 3. Taste"
+msgid ""
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Button 2 Emulation"
-msgstr "Emulation der 2. Taste"
+msgid "Select the font file or directory and click on 'Add'"
+msgstr ""
+"WÀhlen Sie eine Schriftdatei bzw. ein Verzeichnis und betÀtigen Sie "
+"„HinzufĂŒgen“"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Buttons emulation"
-msgstr "Tastenemulation"
+msgid "Madagascar"
+msgstr "Madagaskar"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Bitte wÀhlen Sie den seriellen Anschluss, an dem Ihre Maus hÀngt."
+msgid "Urpmi"
+msgstr "Urpmi"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mouse Port"
-msgstr "Maus Port"
+msgid "Cron not available yet as non-root"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose your type of mouse."
-msgstr "Bitte wÀhlen Sie Ihren Maustyp."
+msgid "System"
+msgstr "System"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Encryption key for %s"
-msgstr "SchlĂŒssel"
+#: ../../any.pm:1 ../../help.pm:1
+#, c-format
+msgid "Do you want to use this feature?"
+msgstr "Möchten Sie diese Möglichkeit nutzen?"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Upgrade %s"
-msgstr "Aktualisiere %s"
+msgid "Arabic"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Handelt es sich um eine Installation oder eine Aktualisierung?"
+msgid ""
+"\n"
+"- Options:\n"
+msgstr ""
+"\n"
+"- Optionen:\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Install/Upgrade"
-msgstr "Installation/Aktualisierung"
+msgid "Password required"
+msgstr "Passwort nötig"
-#: ../../install_steps_interactive.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "Hier die Liste aller Tastaturen"
+msgid "%d minutes"
+msgstr "%d Minuten"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Bitte wÀhlen Sie Ihren Tastaturtyp."
+msgid "Graphics card: %s"
+msgstr "Grafikkarte: %s"
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Quit"
-msgstr "Verlassen"
+msgid "WebDAV transfer failed!"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "License agreement"
-msgstr "Lizenz"
+msgid "XFree configuration"
+msgstr "XFree konfigurieren"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "An error occurred"
-msgstr "Es ist ein Fehler aufgetreten"
+msgid "Choose action"
+msgstr "WĂ€hlen Sie ein Aktion aus"
-#: ../../install_steps_newt.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "French Polynesia"
+msgstr "Französisch Polinesien"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
msgstr ""
-" <Tab>/<Alt-Tab> nÀchstes Element | <Leertaste> auswÀhlen | <F12> weiter "
+"„DrakX“ versucht normalerweise die Anzahl Tasten Ihrer Maus zu erkennen.\n"
+"Sollte das nicht möglich sein, so behandelt es Ihre Maus als\n"
+"Zwei-Tasten-Maus und emuliert die mittlere Taste. Es erkennt ĂŒblicherweise\n"
+"korrekt, ob es sich um eine serielle, eine PS/2- oder um eine USB-Maus\n"
+"handelt.\n"
+"\n"
+"Sollte dies nicht Ihren Vorstellungen entsprechen: WĂ€hlen Sie einfach Ihren\n"
+"Maustyp aus der Liste, die Ihnen angezeigt wird.\n"
+"\n"
+"Sollten Sie einen anderen Maustyp gewÀhlt haben, als DrakX Ihnen vorschlug,\n"
+"können Sie die FunktionstĂŒchtigkeit Ihrer Maus im angezeigten Dialog\n"
+"ĂŒberprĂŒfen. Verwenden Sie auch die Knöpfe und gegebenenfalls das Mausrad,\n"
+"um sicherzustellen, dass die festgelegten Einstellungen funktionieren.\n"
+"Falls nicht, drĂŒcken Sie die [Leertaste] oder die Eingabetaste, um zurĂŒck\n"
+"zum AuswahlmenĂŒ zu gelangen und suchen Sie einen anderen Treiber aus.\n"
+"\n"
+"Es kommt vor, dass MĂ€use mit RĂ€dern nicht korrekt erkannt werden. WĂ€hlen\n"
+"Sie in diesem Fall die richtige Maus aus der vorgegebenen Liste. Stellen\n"
+"Sie sicher, dass Sie auch den Anschluss richtig angegeben haben. Nach\n"
+"betĂ€tigen der SchaltflĂ€che „%s“, wird Ihnen ein Bild der gewĂ€hlten Maus\n"
+"gezeigt. Bewegen Sie RĂ€der und Tasten, um sicherzustellen, dass die Maus\n"
+"richtig erkannt wurde."
-#: ../../install_steps_newt.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Installation %s"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "UnterstĂŒtzung fĂŒr den OKI 4w und kompatible WinDrucker."
-#: ../../install_steps.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "No floppy drive available"
-msgstr "Kein Disketten-Laufwerk verfĂŒgbar"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr "Startet das ALSA (Advanced Linux Sound Architecture) Sound System"
-#: ../../install_steps.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Welcome to %s"
-msgstr "Willkommen auf %s"
+msgid "Installing driver for %s card %s"
+msgstr "Installation des Treibers fĂŒr die Karte %s %s"
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
msgstr ""
-"Einige wichtige Pakete wurden nicht richtig installiert. \n"
-"Entweder ist Ihr CD-ROM-Laufwerk oder Ihre CD-ROM defekt. \n"
-"Testen Sie die CD-ROM auf einem Linux-Rechner mittels „rpm -qpl \n"
-"Mandrake/rpms/*.rpm“\n"
+"Sie haben Ihren alten Standarddrucker („%s“) ĂŒbertragen, soll es auch Ihr "
+"Standarddrucker unter dem neuen Drucksystem „%s“ werden?"
-#: ../../install_steps.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Den EinhÀngpunkt %s kopieren"
+msgid "Enable Server"
+msgstr "Server aktivieren"
-#: ../../install_steps.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Ukrainian"
+msgstr "Ukraine"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
msgstr ""
-"Es trat ein Fehler auf. Ich weiß jedoch nicht, wie ich damit sinnvoll \n"
-"umgehen soll. Sie können fortfahren, jedoch auf eigenes Risiko!"
+"Es wurde kein aktives Netzwerk gefunden und es konnte auch keine "
+"Netzwerkverbindung hergestellt werden. Kontrollieren Sie bitte Ihre Hardware "
+"und Ihre Softwareeinstellngen. Versuchen Sie anschließend erneut den "
+"entfernten Drucker einzurichten."
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Please wait"
-msgstr "Bitte warten"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "Bitte legen Sie die Startdiskette in Laufwerk %s ein."
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ok"
-msgstr "OK"
+msgid "Local network(s)"
+msgstr "Lokale Netzwerke"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
+msgstr "Windows(TM) löschen"
+
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Finish"
-msgstr "Assistent beenden"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr ""
-#: ../../interactive.pm:1 ../../standalone/draksec:1
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Firewire controllers"
+msgstr "USB-Controller"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
+"\n"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
+msgstr ""
+"Nachdem Sie die allgemeinen BS-Starter Parameter eingestellt haben,\n"
+"bekommen Sie die Liste möglicher Betriebssystemalternativen fĂŒr das\n"
+"StartmenĂŒ gezeigt.\n"
+"\n"
+"Sollte sich auf Ihrem Rechner bereits ein anderes Betriebssystem befinden,\n"
+"so wird dieses - sofern es erkannt wird - automatisch zu dem StartmenĂŒ\n"
+"hinzugefĂŒgt. Hier können Sie noch einige Feineinstellungen fĂŒr die\n"
+"bestehenden Optionen vornehmen. Markieren Sie einen bestehenden Eintrag und\n"
+"betĂ€tigen Sie die SchaltflĂ€che „%s“, um ihn anzupassen oder zu löschen;\n"
+"„%s“ erzeugt einen neuen Eintrag und „%s“ bringt Sie zum nĂ€chsten\n"
+"Installationsschritt.\n"
+"\n"
+"Möglicherweise wollen Sie auch nicht, dass andere Anwender Zugriff auf die\n"
+"ĂŒbrigen installierten Betriebssysteme bekommen. In diesem Fall können Sie\n"
+"die jeweiligen EintrĂ€ge entfernen, Sie mĂŒssen jedoch selbst fĂŒr\n"
+"Startdisketten sorgen, um diese Systeme erreichen zu können!"
+
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Basic"
-msgstr "Einfach"
+msgid "System mode"
+msgstr "System-Modus"
-#: ../../interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Advanced"
-msgstr "Fortgeschritten"
+msgid ""
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
+msgstr ""
+"Um auf einem NetWare-Drucker zu drucken sind folgende Angaben erforderlich: "
+"Name des NetWare-Drucker-Servers (entspricht nicht immer dem TCP/IP-"
+"Rechnernamen des Computers), Name der Drucker-Warteschlange, sowie falls "
+"notwendig, den entsprechenden Benutzernamen samt Passwort."
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Remove"
-msgstr "Entfernen"
+msgid "Netmask:"
+msgstr "Netzmaske:"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Modify"
-msgstr "Ändern"
+msgid "Append"
+msgstr "Übergeben"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Add"
-msgstr "HinzufĂŒgen"
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr "Aktualisiere Druckerliste (um alle entfernten CUPS-Drucker anzuzeigen)"
-#: ../../interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose a file"
-msgstr "WĂ€hlen Sie eine Datei"
+msgid ""
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
+"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
+"\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
+"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
+"\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
+"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
+"\n"
+"It also provides a much higher API than OSS.\n"
+"\n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
msgstr ""
-"Hier können Sie die Taste, bzw Tastenkombination wÀhlen, \n"
-"mit der Sie zwischen verschiedenen Tastaturbelegugen \n"
-"umschalten können, etwa zwischen deutschem und US-Layout."
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Right \"Windows\" key"
-msgstr "Rechte „Windows“-Taste"
+msgid ""
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
+"\n"
+"You may prefer to replay the installation.\n"
+msgstr ""
+"Die automatische Installation kann, falls Sie wollen,\n"
+"vollautomatisch erfolgen. In diesem Fall wird die\n"
+"Festplatte vollstÀndig durch DrakX rekonfiguriert\n"
+"(diese Möglichkeit ist fĂŒr die Replikation auf anderen\n"
+"Rechnern gedacht).\n"
+"\n"
+"Vermutlich werden Sie es vorziehen, erneut eine normale\n"
+"Installation durchzufĂŒhren.\n"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Left \"Windows\" key"
-msgstr "Linke „Windows“-Taste"
+msgid "Network printer \"%s\", port %s"
+msgstr "Netzwerkdrucker „%s“, Port %s"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "\"Menu\" key"
-msgstr "MenĂŒtaste"
+msgid ""
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
+msgstr ""
+"Bitte wÀhlen Sie die Netzwerkkarte, die mit Ihrem lokalen Netzwerk \n"
+"verbunden ist."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt und Umschalttaste gleichzeitig"
+msgid "OK to restore the other files."
+msgstr "OK, die ĂŒbrigen Dateien zu aktualisieren."
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Strg und Alt gleichzeitig"
+msgid "Please choose your keyboard layout."
+msgstr "Bitte wÀhlen Sie Ihren Tastaturtyp."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "CapsLock key"
-msgstr "CapsLock Taste"
+msgid "Printer Device URI"
+msgstr "Druckeranschluss URI"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Strg und Umschalttaste gleichzeititg"
+msgid "Not erasable media!"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "Beide Umschalttasten gleichzeitig"
+msgid "Terminal-based"
+msgstr "Terminal-basiert"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Right Alt key"
-msgstr "AltGr-Taste"
+msgid "Installing a printing system in the %s security level"
+msgstr "Installation eines Drucksystems in Sicherheitsebene %s"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslawien (Lateinisches Layout)"
+msgid "The user name is too long"
+msgstr "Dieses Benutzerkennzeichen ist zu lang"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnam QWERTY („number row“)"
+msgid "Other OS (windows...)"
+msgstr "Anderes Betriebssystem (Windows ...)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "US keyboard (international)"
-msgstr "Vereinigte Staaten von Amerika (international)"
+msgid "WebDAV remote site already in sync!"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "US keyboard"
-msgstr "Vereinigte Staaten von Amerika"
+msgid "Reading printer database..."
+msgstr "Lesen der Drucker-Datenbank ..."
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "UK keyboard"
-msgstr "Großbritannien"
+msgid "Generate auto install floppy"
+msgstr "Erstellen einer Auto-Installationsdiskette"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Ukrainian"
-msgstr "Ukraine"
+msgid ""
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
+msgstr ""
+"\t\t Benutzer: %s\n"
+"\t\t Pfad: %s \n"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "TĂŒrkei (modernes „Q“ Modell)"
+msgid "Somalia"
+msgstr "Somalia"
-#: ../../keyboard.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "TĂŒrkei (traditionelles „F“ Modell)"
+msgid "No open source driver"
+msgstr "Kein OpenSource Treiber"
-#: ../../keyboard.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Tajik keyboard"
-msgstr "Tadschikistan"
+msgid ""
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
+msgstr ""
+"Diese Ebene bietet die selbe FunktionalitÀt, wie die vorherige. Jedoch ist \n"
+"das System nun komplett geschlossen. Es ist die höchste Sicherheitsebene."
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Thai keyboard"
-msgstr "ThailÀndisch"
+msgid "Nicaragua"
+msgstr "Nicaragua"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "Tamilisch (Schreibmaschine)"
+msgid "New Caledonia"
+msgstr "Neukaledonien"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr "Tamilisch (TSCII Layout)"
+msgid "European protocol (EDSS1)"
+msgstr "EuropÀisches Protokoll (EDSS1)"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Serbian (cyrillic)"
-msgstr "Serbien (Kyrillisches Layout)"
+msgid "Video mode"
+msgstr "Video Modus"
-#: ../../keyboard.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Slowakei (QWERTY)"
+msgid "Please enter your email address below "
+msgstr "Bitte geben Sie Ihre E-Mail-Adresse ein"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Slowakei (QWERTZ)"
+msgid "Oman"
+msgstr "Oman"
-#: ../../keyboard.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Slovenian"
-msgstr "Slowenien"
+msgid "Network Monitoring"
+msgstr "NetzwerkĂŒberwachung"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Swedish"
-msgstr "Schweden"
+msgid "SunOS"
+msgstr "SunOS"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Russian (Yawerty)"
-msgstr "Russland (YaWERTY)"
+msgid "New size in MB: "
+msgstr "Neue GrĂ¶ĂŸe in MB:"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Russian"
-msgstr "Russland"
+msgid "Partition table type: %s\n"
+msgstr "Partitionstabellen Typ: %s\n"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Romanian (qwerty)"
-msgstr "RumÀnien (QWERTY)"
+msgid "Authentication Windows Domain"
+msgstr "Windows DomÀnenauthentifizierung"
#: ../../keyboard.pm:1
#, c-format
-msgid "Romanian (qwertz)"
-msgstr "RumÀnien (QWERTZ)"
+msgid "US keyboard"
+msgstr "Vereinigte Staaten von Amerika"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Canadian (Quebec)"
-msgstr "Kanada (Québec)"
+msgid "Buttons emulation"
+msgstr "Tastenemulation"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Portuguese"
-msgstr "Portugal"
+msgid ", network printer \"%s\", port %s"
+msgstr ", Netzwerkdrucker „%s“, Port %s"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Polen (QWERTZ Layout)"
+msgid ""
+"\n"
+"Drakbackup activities via tape:\n"
+"\n"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Polen (QWERTY Layout)"
+msgid ""
+"\n"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
+msgstr ""
+"\n"
+" FTP Verbindungsproblem: Es war nicht möglich, Ihre Dateien per FTP zu "
+"ĂŒbertragen.\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Norwegian"
-msgstr "Norwegen"
+msgid "Sending Speed:"
+msgstr "Sendegeschwindigkeit: "
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Dutch"
-msgstr "Niederlande"
+msgid "Halt bug"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Maltese (US)"
-msgstr "Malta (USA)"
+msgid "Mail alert configuration"
+msgstr "Mail Benachrichtigungskonfiguration"
-#: ../../keyboard.pm:1
+# drakfw:278 (Neuse
+#: ../../lang.pm:1
#, c-format
-msgid "Maltese (UK)"
-msgstr "Malta (GB)"
+msgid "Tokelau"
+msgstr "Tokelau (Neuseeland)"
#: ../../keyboard.pm:1
#, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Mongolei (Kyrillisches Layout)"
+msgid "Bosnian"
+msgstr "Bosnien"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Myanmar (Burmese)"
-msgstr "Myanmar (Burmesien)"
+msgid "Release: "
+msgstr "Ausgabe:"
-#: ../../keyboard.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Macedonian"
-msgstr "Mazedonien"
+msgid "Connection speed"
+msgstr "Verbindungsgeschwindigkeit"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Malayalam"
-msgstr "Malayalam"
+msgid ""
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
+msgstr ""
+"Bitte geben Sie den GerÀtenamen \n"
+"Ihres Brenners an, etwa „0,1,0“."
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Latvian"
-msgstr "Lettland"
+msgid "Namibia"
+msgstr "Namibia"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litauen (QWERTY - Phonetisch)"
+msgid "Database Server"
+msgstr "Datenbankserver"
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litauen (QWERTY - „number row“)"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litauen (AZERTY - neu)"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "Ich kann keine Partition zu dem _formatierten_ RAID md%d hinzufĂŒgen"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litauen (AZERTY - alt)"
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
+msgstr ""
+"Ihre Karte kann 3D-hardwarebeschleunigt werden, allerdings nur mit \n"
+"XFree %s. BEM: DIESE FUNKTION IST NOCH IM EXPERIMENTIERSTADIUM UND KANN \n"
+"ZUM STEHENBLEIBEN IHRES RECHNERS FÜHREN. Ihre Karte wird auch von \n"
+"XFree %s unterstĂŒtzt, wodurch Sie bessere 2D-UnterstĂŒtzung erhalten \n"
+"können."
-#: ../../keyboard.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Laotian"
-msgstr "Laos"
+msgid "Please wait, setting security options..."
+msgstr "Bitte warten, Sicherheitsoptionen werden eingestellt..."
-#: ../../keyboard.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Latin American"
-msgstr "Lateinamerika"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr "Unbekannt|CPH05X (bt878) [Zahlreiche Hersteller]"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Korean keyboard"
-msgstr "Korea"
+msgid "Launch the graphical environment when your system starts"
+msgstr "X-Window nach dem Hochfahren automatisch starten "
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Japanese 106 keys"
-msgstr "Japan (106 Tasten)"
+msgid "hourly"
+msgstr "stĂŒndlich"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Inuktitut"
-msgstr "Grönland (Inuktitut)"
+msgid " Successfuly Restored on %s "
+msgstr " erfolgreich auf %s wiederhergestellt "
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Italian"
-msgstr "Italien"
+msgid "Making printer port available for CUPS..."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Icelandic"
-msgstr "Island"
+msgid "Antigua and Barbuda"
+msgstr "Antigua und Barbuda"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Iranian"
-msgstr "Iran"
+msgid ""
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
+msgstr ""
#: ../../keyboard.pm:1
#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "Israel (Phonetisch)"
+msgid "Spanish"
+msgstr "Spanien"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Israeli"
-msgstr "Israel"
+msgid "Start"
+msgstr "Start"
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Croatian"
-msgstr "Kroatien"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hungarian"
-msgstr "Ungarn"
+msgid "Configuring applications..."
+msgstr "Anwendungen konfigurieren ..."
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Gurmukhi"
-msgstr "Indien (Gurmukhi)"
+msgid "Normal modem connection"
+msgstr "Normale Modem Verbindung"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "Gujarati"
-msgstr "Indien (Gujarati)"
+msgid "File Selection"
+msgstr "Dateiauswahl"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Greek"
-msgstr "Griechenland"
+msgid ""
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+" tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+" standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
+msgstr ""
+"Welche ISDN Konfiguration wollen Sie durchfĂŒhren?\n"
+"\n"
+"* Die alte Konfiguration verwendet „isdn4net“. Sie \n"
+" enthÀllt mÀchtigere Werkzeuge, ist jedoch komplizierter \n"
+" einzurichten und nicht voll standardkonform.\n"
+"\n"
+"* Die neue Konfiguration mit „isdn-light“ ist \n"
+" verstÀndlicher und standardkonformer, sie enthÀllt \n"
+" jedoch weniger Werkzeuge.\n"
+"\n"
+"Wir empfehlen die „isdn-light“ Variante.\n"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgien (Lateinisches Layout)"
+msgid "CUPS"
+msgstr "CUPS"
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgien (Kyrillisches Layout)"
+msgid "Run config tool"
+msgstr "Konfigurationswerkzeug starten"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "French"
-msgstr "Frankreich"
+msgid "Bootloader installation"
+msgstr "Installation des Betriebssystemstarters"
-#: ../../keyboard.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Finnish"
-msgstr "Finnland"
+msgid "Root partition size in MB: "
+msgstr "GrĂ¶ĂŸe der Verzeichnisbaumwurzel-Partition in MB: "
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Spanish"
-msgstr "Spanien"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "Dieses Paket ist existenziell, sie können es nicht deselektieren"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Estonian"
-msgstr "Estland"
+msgid "Etherboot ISO image is %s"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Schweden)"
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"Der Dienst named (BIND) stellt ihnen einen Server zur VerfĂŒgung, \n"
+"mit dessen Hilfe Rechnernamen in IP-Adressen umgesetzt werden. \n"
+"Ein solcher Dienst wird „Domain Name Server“ (DNS) genannt. \n"
+"Falls Sie nur einen Rechner besitzen, mit dem Sie per Modem/ISDN ins \n"
+"Netz gehen, benötigen Sie diesen Dienst nicht."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norwegen)"
+msgid "Disconnect..."
+msgstr "Trenne Verbindung ..."
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak (USA)"
+msgid "Saint Lucia"
+msgstr "St. Lucia"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Danish"
-msgstr "DĂ€nemark"
+msgid "Report"
+msgstr "Report"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Devanagari"
-msgstr "Devanagari"
+msgid "Palau"
+msgstr "Palau"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "German (no dead keys)"
-msgstr "Deutschland (ohne Akzenttasten)"
+msgid "level"
+msgstr "Level"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "German"
-msgstr "Deutschland"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
+msgstr ""
+"Alle VorfÀlle werden werden von einem einzelnen qualifizierten MandrakeSoft "
+"Experten bearbeitet."
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Czech (QWERTY)"
-msgstr "Tschechien (QWERTY)"
+msgid "Package Group Selection"
+msgstr "Auswahl der Paketgruppen"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Czech (QWERTZ)"
-msgstr "Tschechien (QWERTZ)"
+msgid "Restore Via Network Protocol: %s"
+msgstr "Wiederherstellen mit Netzwerkprotokoll: %s"
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Swiss (French layout)"
-msgstr "Schweiz (französisches Layout)"
+msgid "You can configure each parameter of the module here."
+msgstr "Sie können alle Modulparamerter hier einstellen."
-#: ../../keyboard.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Swiss (German layout)"
-msgstr "Schweiz (deutsches Layout)"
+msgid "Choose the resolution and the color depth"
+msgstr "WÀhlen Sie bitte Auflösung und Farbtiefe"
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Belarusian"
-msgstr "Weißrussland"
+msgid "Emulate third button?"
+msgstr "Die dritte Maustaste emulieren?"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Bosnian"
-msgstr "Bosnien"
+msgid ""
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
+msgstr ""
+"Sie können keine weiteren Partitionen anlegen (da Sie die maximale \n"
+"Anzahl primÀrer Partitionen erstellt haben). Bitte löschen Sie \n"
+"eine primÀre Partioion und legen Sie stattdessen eine erweiterte \n"
+"Partition an."
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasilien (ABNT-2)"
+msgid "Mount"
+msgstr "EinhÀngen"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Bulgarian (BDS)"
-msgstr "Bulgarien (BDS)"
+msgid "Creating auto install floppy"
+msgstr "Erstellen einer Auto-Installationsdiskette"
-#: ../../keyboard.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "Bulgarien (Phonetisch)"
+msgid "Install updates"
+msgstr "Aktualisierungen installieren"
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Bengali"
-msgstr "Bangladesh"
+msgid "text box height"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Belgian"
-msgstr "Belgien"
+msgid "State"
+msgstr "Status"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "Aserbeidschan (Lateinisches Layout)"
+msgid "Be sure a media is present for the device %s"
+msgstr "Stellen Sie sicher, dass ein Medium in Laufwerk %s liegt."
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Arabic"
+msgid "Enable multiple profiles"
+msgstr "Mehrere Profile einschalten"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
msgstr ""
+"Diese Optionen kön alle Ihre Dateien im Verzeichnis „/etc“ sichern und "
+"wiederherstellen\n"
-#: ../../keyboard.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Armenian (phonetic)"
-msgstr "Armenien (Phonetisch)"
+msgid "Local printer"
+msgstr "Lokaler Drucker"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Armenian (typewriter)"
-msgstr "Armenien (Schreibmaschine)"
+msgid "Files Restored..."
+msgstr "Dateien wiederhergestellt..."
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Armenian (old)"
-msgstr "Armenien (alt)"
+msgid "Package selection"
+msgstr "Auswahl der Pakete"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Albanian"
-msgstr "Albanien"
+msgid "Mauritania"
+msgstr "Mauretanien"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Polish"
-msgstr "Polen"
+msgid ""
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
+"\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
+"\n"
+msgstr ""
+"Ich kann Ihre aktuelle Konfiguration beibehalten und annehmen, dass Sie "
+"bereits einen DHCP-Server eingerichtet haben. Stellen Sie in diesem Fall "
+"sicher, dass ich Ihr Klasse-C Netzwerk korrekt erkannt habe. Ich werde es "
+"weder neukonfigurieren, noch Ihre DHCP-Konfiguration Àndern.\n"
+"\n"
+"Ihr standardmĂ€ĂŸiger DNS Eintrag ist der Caching Nameserver Ihrer Firewall. "
+"Sie können diesen etwa durch den DNS Server Ihres Internetanbieters "
+"ersetzen.\n"
+"\n"
+"Ich kann jedoch auch Ihre Schnittstelle neu konfigurieren und einen DHCP-"
+"Server fĂŒr Sie aufsetzen.\n"
+"\n"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Dvorak"
-msgstr "Dvorak"
+msgid ""
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
+msgstr ""
+"Es wurde kein lokaler Drucker erkannt! Um ihn manuell hinzuzufĂŒgen geben Sie "
+"einfach einen GerÀte- oder Dateinamen in der Eingabezeile an (Parallele "
+"AnschlĂŒsse: /dev/lp0, /dev/lp1, ..., Ă€quivalent zu LPT1:, LPT2:, ...; Erster "
+"USB Drucker: /dev/usb/lp0, zweier USB Drucker: /dev/usb/lp1, ...)."
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Zimbabwe"
-msgstr "Simbabwe"
+msgid "All primary partitions are used"
+msgstr "Alle PrimÀrpartitionen sind in Gebrauch"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Zambia"
-msgstr "Sambia"
+msgid ""
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
+msgstr ""
+"Es ist sehr empfehlenswert, im Anschluss Ihre X-OberflÀche\n"
+"neu zu starten, um Probleme, die durch die Änderung des\n"
+"Rechnernamens hervorgerufen werden, zu vermeiden."
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../services.pm:1
#, c-format
-msgid "South Africa"
-msgstr "SĂŒdafrika"
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr ""
+"Automatische Erkennung und Konfiguration neuer Hardware wÀhrend des \n"
+"Betriebssystemstarts."
-#: ../../lang.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Serbia"
-msgstr "Serbien"
+msgid "Installation Server Configuration"
+msgstr "Konfiguration des Installations-Servers"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mayotte"
-msgstr "Mayotte (Frankreich)"
+msgid "Configuring IDE"
+msgstr "IDE konfigurieren"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Yemen"
-msgstr "Yemen"
+msgid "Network functionality not configured"
+msgstr "Ihr Netzwerk ist nicht konfiguriert"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Samoa"
-msgstr "Samoa"
+msgid "Configure module"
+msgstr "Modul konfigurieren"
#: ../../lang.pm:1
#, c-format
-msgid "Wallis and Futuna"
-msgstr "Wallis und Futuna"
+msgid "Cocos (Keeling) Islands"
+msgstr "Cocos (Keeling) Inseln"
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Vanuatu"
-msgstr "Vanuatu"
+msgid "Disconnecting from the Internet "
+msgstr "Vom Internet trennen"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Vietnam"
-msgstr "Vietnam"
+msgid "You'll need to reboot before the modification can take place"
+msgstr ""
+"Sie mĂŒssen Ihren Rechner neu starten, damit die VerĂ€nderungen wirksam werden"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Jungfern-Inseln (U.S.)"
+msgid "Provider phone number"
+msgstr "Telefonnummer des Providers"
-#: ../../lang.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Virgin Islands (British)"
-msgstr "Jungferninseln (britisch)"
+msgid "Host %s"
+msgstr "Rechner %s"
#: ../../lang.pm:1
#, c-format
-msgid "Venezuela"
-msgstr "Venezuela"
+msgid "Armenia"
+msgstr "Armenien"
#: ../../lang.pm:1
#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "St. Vincent und die Grenadinen"
+msgid "Fiji"
+msgstr "Fidschi"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Vatican"
-msgstr "Vatikan"
+msgid ""
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Uzbekistan"
-msgstr "Usbekistan"
+msgid "Second floppy drive"
+msgstr "zweite Disketten-Laufwerk"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Uruguay"
-msgstr "Uruguay"
+msgid "About Harddrake"
+msgstr "Über HardDrake"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "United States Minor Outlying Islands"
+msgid "Drive capacity"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Uganda"
-msgstr "Uganda"
+msgid ""
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
+msgstr ""
+"Legen Sie eine Diskette in das Laufwerk\n"
+"Alle Daten auf dieser Diskette werden gelöscht!"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Ukraine"
-msgstr "Ukraine"
+msgid "Size: %s"
+msgstr "GrĂ¶ĂŸe: %s"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Tanzania"
-msgstr "Tansania"
+msgid "Control and Shift keys simultaneously"
+msgstr "Strg und Umschalttaste gleichzeititg"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Taiwan"
-msgstr "Taiwan"
+msgid "secondary"
+msgstr "SekundÀr"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Tuvalu"
-msgstr "Tuvalu"
+msgid "View Backup Configuration."
+msgstr "Sicherungskonfiguration anzeiegen"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Trinidad und Tobago"
+msgid "if set to yes, report check result to syslog."
+msgstr ""
-#: ../../lang.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Turkey"
-msgstr "TĂŒrkei"
+msgid "No password"
+msgstr "Kein Passwort"
#: ../../lang.pm:1
#, c-format
-msgid "Tonga"
-msgstr "Tonga"
+msgid "Nigeria"
+msgstr "Nigeria"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Tunisia"
-msgstr "Tunesien"
+msgid "There is no existing partition to use"
+msgstr "Es gibt keine existierende Partition, die ich verwenden kann."
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Turkmenistan"
-msgstr "Turkmenistan"
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
+msgstr ""
+"Die folgenden Scanner\n"
+"\n"
+"%s\n"
+"sind direkt an Ihr System angeschlossen.\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "East Timor"
-msgstr "Ost Timor"
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
+msgstr ""
+"Um einen TCP- oder Socket-Drucker verwenden zu können, mĂŒssen Sie auf alle "
+"FÀlle dessen Rechnernamen, bzw. IP-Adresse - möglicherweise auch den Port - "
+"angeben. Bei HP JetDirect Servern ist dies normalerweise die Port-Adresse "
+"9100, bei anderen Servern kann es eine andere sein. Schauen Sie im "
+"Zweifelsfall in die Unterlagen des Herstellers."
-# drakfw:278 (Neuse
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Tokelau"
-msgstr "Tokelau (Neuseeland)"
+msgid "Hard drive information"
+msgstr "Festplatten-Informationen"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Tajikistan"
-msgstr "Tadschikistan"
+msgid "Russian"
+msgstr "Russland"
#: ../../lang.pm:1
#, c-format
-msgid "Thailand"
-msgstr "Thailand"
+msgid "Jordan"
+msgstr "Jordanien"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Togo"
-msgstr "Togo"
+msgid "Hide files"
+msgstr "Dateien verstecken"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "French Southern Territories"
-msgstr "French Southern Territories"
+msgid "Auto-detect printers connected to this machine"
+msgstr "Selbsterkennung von direkt am Rechner angeschlossenen Druckern"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Chad"
-msgstr "Tschad"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "Turks und Caicos Inseln"
+msgid "Sorry, no floppy drive available"
+msgstr "Ich kann kein Laufwerk finden"
#: ../../lang.pm:1
#, c-format
-msgid "Swaziland"
-msgstr "Swaziland"
+msgid "Bolivia"
+msgstr "Bolivien"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Syria"
-msgstr "Syrien"
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
+"Richten Sie Ihren Windows-Server so ein, dass Ihr Drucker ĂŒber das IPP-"
+"Protokoll erreichbar ist und konfigurieren sie ihn auf dieser Maschine mit "
+"dem Verbindungstyp „%s“ in Printerdrake.\n"
+"\n"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "El Salvador"
-msgstr "El Salvador"
+msgid "Bad package"
+msgstr "UngĂŒltiges Paket"
-#: ../../lang.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Sao Tome and Principe"
-msgstr "Sao Tome und Principe"
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
+"Verwandeln Sie Ihren Rechner mit ein paar Mausklicks in einen "
+"leistungsfÀhigen Server: Web, E-Mail, Firewall, Router, Datei- und "
+"Druckserver, ..."
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Suriname"
-msgstr "Surinam"
+msgid "DrakSec Basic Options"
+msgstr "DrakSec Grundeinstellungen"
-#: ../../lang.pm:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Somalia"
-msgstr "Somalia"
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program. Just type \"sndconfig\" in a console."
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Senegal"
-msgstr "Senegal"
+msgid "Romania"
+msgstr "RumÀnien"
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "San Marino"
-msgstr "San Marino"
+msgid "choose device"
+msgstr "GerÀt wÀhlen"
#: ../../lang.pm:1
#, c-format
-msgid "Sierra Leone"
-msgstr "Sierra Leone"
+msgid "Canada"
+msgstr "Kanada"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Slovakia"
-msgstr "Slowakei"
+msgid "Remove from LVM"
+msgstr "Löschen aus dem LVM"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Svalbard and Jan Mayen Islands (Norwegen)"
+msgid "Timezone"
+msgstr "Zeitzone"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Slovenia"
-msgstr "Slowenien"
+msgid "German"
+msgstr "Deutschland"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Saint Helena"
-msgstr "Sankt Helena"
+msgid "Next ->"
+msgstr "Weiter ->"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Singapore"
-msgstr "Singapur"
+msgid ""
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sudan"
-msgstr "Sudan"
+msgid ""
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
+msgstr ""
+"\n"
+"Es handelt sich mit großer\n"
+"Wahrscheinlichkeit um eine\n"
+"Treiber-Partition. Sie sollten\n"
+"sie daher besser unverÀndert\n"
+"lassen.\n"
#: ../../lang.pm:1
#, c-format
-msgid "Seychelles"
-msgstr "Seychellen"
+msgid "Guinea-Bissau"
+msgstr "Guinea-Bissau"
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Solomon Islands"
-msgstr "Solomon-Inseln"
+msgid "Horizontal refresh rate"
+msgstr "Horizontale Wiederholfrequenz"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Saudi Arabia"
-msgstr "Saudi Arabien"
+msgid ""
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
+msgstr ""
+"Ich kann diesen EinhĂ€ngpunkt nicht zurĂŒcksetzen, da diese Partition als \n"
+"Loopback verwendet wird. Bitte entfernen Sie erst diesen Loopback."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Rwanda"
-msgstr "Ruanda"
+msgid ""
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
+msgstr ""
+"Das von Ihnen wÀhrend der Installation eingerichtete Netzwerk kann jetzt "
+"nicht gestartet werden. Testen Sie bitte, ob es nach einem Neustart zur "
+"VerfĂŒgung steht. Falls nicht, berichtigen Sie die Einstellungen im Mandrake "
+"Kontrollzentrum unter „Netzwerk & Internet/Verbindung“. Versuchen Sie "
+"anschließend erneut den Drucker mittels „Hardware/Drucker“im Kontrollzentrum "
+"einzurichten."
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Russia"
-msgstr "Russland"
+msgid "USB controllers"
+msgstr "USB-Controller"
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Romania"
-msgstr "RumÀnien"
+msgid "What norm is your TV using?"
+msgstr "Um welche Fernsehnorm handelt es sich?"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Reunion"
-msgstr "RĂ©union"
+msgid "Type:"
+msgstr "Typ:"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Qatar"
-msgstr "Quatar"
+msgid "Share name"
+msgstr "Freigabename"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Palau"
-msgstr "Palau"
+msgid "enable"
+msgstr "aktivieren"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Paraguay"
-msgstr "Paraguay"
+msgid ""
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
+msgstr ""
+"Verbindung mit dem Mandrake Linux Web-Server aufbauen, um eine Liste\n"
+"verfĂŒgbarer Pakete zu erhalten."
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Portugal"
-msgstr "Portugal"
+msgid ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
+msgstr ""
+"Beim Neustart des Netzwerks trat ein Fehler auf: \n"
+"\n"
+"%s"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Palestine"
-msgstr "PalÀstina"
+msgid "Remove the loopback file?"
+msgstr "Die Loopback-Datei entfernen?"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Puerto Rico"
-msgstr "Puerto Rico"
+msgid "Selected size is larger than available space"
+msgstr "GewĂŒnschte GrĂ¶ĂŸe ĂŒbersteigt den verfĂŒgbaren Platz"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pitcairn"
-msgstr "Pitcairn"
+msgid "NCP server name missing!"
+msgstr "Der NCP Servername fehlt!"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "St. Pierre und Miquelon"
+msgid "Please choose your country."
+msgstr "Bitte wÀhlen Sie Ihren Staat."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Poland"
-msgstr "Polen"
+msgid "Hard Disk Backup files..."
+msgstr "Backup-Dateien auf der Festplatte ..."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Pakistan"
-msgstr "Pakistan"
+msgid "Laotian"
+msgstr "Laos"
#: ../../lang.pm:1
#, c-format
-msgid "Philippines"
-msgstr "Philippinen"
+msgid "Samoa"
+msgstr "Samoa"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Papua New Guinea"
-msgstr "Papua-Neuguinea"
+msgid ""
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
+msgstr ""
+"Der Dienst rstat ermöglicht es Anwendern anderer Rechner des \n"
+"Netzwerks Preformance-Daten dieses Rechners zu erhalten."
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "French Polynesia"
-msgstr "Französisch Polinesien"
+msgid "Re-generating list of configured scanners ..."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Peru"
-msgstr "Peru"
+msgid "Scanner"
+msgstr "Scanner"
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Panama"
-msgstr "Panama"
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr "Warnung: Testen dieser Grafikkarte kann Ihren Rechner anhalten"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Oman"
-msgstr "Oman"
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr ""
+"Das Benutzerkennzeichen sollte nur aus Kleinbuchstaben, Ziffern, \n"
+"„-“ und „_“ bestehen"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "New Zealand"
-msgstr "Neuseeland"
+msgid "Menudrake"
+msgstr "Menudrake"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Niue"
-msgstr "Niue"
+msgid "Welcome To Crackers"
+msgstr "Cracker-Spielplatz"
-#: ../../lang.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Nauru"
-msgstr "Nauru"
+msgid "Module options:"
+msgstr "Modul-Optionen:"
-#: ../../lang.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Nepal"
-msgstr "Nepal"
+msgid "Secure your networks with the Multi Network Firewall"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Nicaragua"
-msgstr "Nicaragua"
+msgid "Go on without configuring the network"
+msgstr "Weiter ohne Netzwerkkonfiguration"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Nigeria"
-msgstr "Nigeria"
+msgid "Abort"
+msgstr "Abbruch"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Norfolk Island"
-msgstr "Norfolkinsel"
+msgid "No password prompt on %s at port %s"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Niger"
-msgstr "Niger"
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "Geben Sie an, ob sie das nicht-zurĂŒckspulende GerĂ€t verwenden wollen."
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "New Caledonia"
-msgstr "Neukaledonien"
+msgid "Usage of remote scanners"
+msgstr "Scanner an anderen Rechnern nutzen"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Namibia"
-msgstr "Namibia"
+msgid "\t-CDROM.\n"
+msgstr "\t- CD-ROM.\n"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Mozambique"
-msgstr "Mosambik"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
+msgstr ""
+"Ihre Windows-Partition ist zu sehr fragmentiert.\n"
+"Starten Sie bitte erst „defrag“ unter Windows."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Malaysia"
-msgstr "Malaysia"
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak (Norwegen)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mexico"
-msgstr "Mexiko"
+msgid "Hard Disk Backup Progress..."
+msgstr "Festplattenbackup in Bearbeitung ..."
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Malawi"
-msgstr "Malawi"
+msgid "Unable to fork: %s"
+msgstr "Ich kann nicht forken: %s"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Maldives"
-msgstr "Malediven"
+msgid "Type: "
+msgstr "Typ:"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Mauritius"
-msgstr "Mauritius"
+msgid "<-- Edit Client"
+msgstr "<-- Client bearbeiten"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Malta"
-msgstr "Malta"
+msgid "no fonts found"
+msgstr "Keine Schriften gefunden"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Montserrat"
-msgstr "Montserrat"
+msgid "Mouse"
+msgstr "Maus"
-#: ../../lang.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Mauritania"
-msgstr "Mauretanien"
+msgid "not enough room in /boot"
+msgstr "Sie haben nicht genug Platz in „/boot“"
-#: ../../lang.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Martinique"
-msgstr "Martinique"
+msgid "Choosing an arbitratry driver"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Northern Mariana Islands"
-msgstr "Nördliche Mariannen-Inseln"
+msgid "Host name"
+msgstr "Rechnername"
#: ../../lang.pm:1
#, c-format
-msgid "Mongolia"
-msgstr "Mongolei"
+msgid "Liechtenstein"
+msgstr "Liechtenstein"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Myanmar"
-msgstr "Burma"
+msgid "the color of the progress bar"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Mali"
-msgstr "Mali"
+msgid "Suppress Fonts Files"
+msgstr "Schriftdateien löschen"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Macedonia"
-msgstr "Mazedonien"
+msgid "Add to RAID"
+msgstr "Zum RAID hinzufĂŒgen"
-#: ../../lang.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
+"Sie können weitere yaboot EintrĂ€ge angeben, etwa fĂŒr andere\n"
+"Betriebssysteme, alternative Kerne oder ein Rettungssystem.\n"
+"\n"
+"FĂŒr ein anderes BS können Sie nur einen Namen und die Start-Partition\n"
+"angeben.\n"
+"\n"
+"FĂŒr Linux gibt es einige Parameter:\n"
+"\n"
+" * „%s“: Es handelt sich um den Namen, den Sie an der yaboot\n"
+"Eingabeaufforderung angeben mĂŒssen, um diese Alternative zu wĂ€hlen.\n"
+"\n"
+" * „%s“: Der Name des BS-Kerns, den sie starten wollen. Normalerweise\n"
+"handelt es sich um „vmlinuz“ oder eine Variante von „vmlinuz“ mit einer\n"
+"Versionsnummer.\n"
+"\n"
+" * „%s“: Die Verzeichnisbaumwurzel „/“ Ihrer Linux Installation.\n"
+"\n"
+" * „%s“: Auf Apple Hardware, wird die Übergabemöglichkeit weiterer\n"
+"Kernparameter hÀufig verwendet, um die Grafikausgabe richtig zu\n"
+"konfigurieren oder die Tastaturemulation der Mausknöpfe einzuschalten, da\n"
+"klassische Apple-MĂ€use von Hause aus mit 2 fehlenden Maustasten\n"
+"ausgeliefert werden. Hier einige Beispiele:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * „%s“: Dieser Parameter kann entweder verwendet werden, um beim\n"
+"Betriebssystemstart bereits zusĂ€tzliche Kern-Module zur VerfĂŒgung zu haben,\n"
+"ohne dass das Start-GerĂ€t zur VerfĂŒgung steht oder um ein RamDisk Abbild\n"
+"fĂŒr den BS-Start in NotfĂ€llen zur VerfĂŒgung zu haben.\n"
+"\n"
+" * „%s“: StandardmĂ€ĂŸig ist eine RamDisk 4096 Bytes groß. Sollten Sie eine\n"
+"grĂ¶ĂŸere RamDisk benötigen, können Sie das mit diesem Parameter einstellen.\n"
+"\n"
+" * „%s“: Normalerweise wird die Verzeichnisbaumwurzel zuerst im\n"
+"Nur-Lese-Modus eingehĂ€ngt, um eine Dateisystem-Verifikation durchfĂŒhren zu\n"
+"können, bevor das Betriebssystem seinen Dienst aufnimmt. Diesen Umstand\n"
+"können Sie hier abstellen.\n"
+"\n"
+" * „%s“: Sollte sich die Apple Grafik-Hardware als extrem problematisch\n"
+"erweisen, können Sie diesen Parameter verwenden um im sog. „novideo“-Modus,\n"
+"also im FrameBuffer-Modus zu starten.\n"
+"\n"
+" * „%s“: WĂ€hlt diesen Eintrag als Standard Linux-Kern, den Sie durch\n"
+"DrĂŒcken von Enter an der yaboot Eingabeaufforderung gestartet bekommen.\n"
+"Wenn Sie die [Tab]-Taste an der Eingabeaufforderung drĂŒcken, erhalten Sie\n"
+"eine Liste der verfĂŒgbaren Alternativen. Der Standardeintrag wird mit einem\n"
+"Stern „*“ markiert."
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Marshall Islands"
-msgstr "Marshall Inseln"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"Der Drucker „%s“ wurde erfogrich zu StarOffice/OpenOffice.org/GIMP "
+"hinzugefĂŒgt."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Madagascar"
-msgstr "Madagaskar"
+msgid "No floppy drive available!"
+msgstr "Kein Disketten-Laufwerk verfĂŒgbar!"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
+msgstr ""
+"Um alle existierenden Optionen des Druckers zu erfahren, lesen Sie entweder "
+"die unten angegebene Liste oder betĂ€tigen Sie die SchaltflĂ€che „Liste der "
+"Drucker-Optionen“. %s%s\n"
+"\n"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Moldova"
-msgstr "Moldawien"
+msgid "Continue anyway?"
+msgstr "Wollen Sie trotzdem fortfahren?"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Monaco"
-msgstr "Monaco"
+msgid ""
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
+msgstr ""
+"Falls Ihr Drucker nicht aufgefĂŒhrt ist wĂ€hlen Sie bitte ein kompatibles bzw "
+"Ă€hnliches Modell (FĂŒr Einzelheiten schauen Sie bitte in Ihr Druckerhandbuch)."
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Morocco"
-msgstr "Marokko"
+msgid "Printer"
+msgstr "Drucker"
#: ../../lang.pm:1
#, c-format
-msgid "Libya"
-msgstr "Lybien"
+msgid "Saudi Arabia"
+msgstr "Saudi Arabien"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Latvia"
-msgstr "Litauen"
+msgid "Internet"
+msgstr "Internet"
-#: ../../lang.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Luxembourg"
-msgstr "Luxemburg"
+msgid "Some devices were added:\n"
+msgstr "Einige GerĂ€te wurden hinzugefĂŒgt:\n"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Lithuania"
-msgstr "Litauen"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "Geometrie: %s Zylinder, %s Köpfe, %s Sektoren\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lesotho"
-msgstr "Lesotho"
+msgid "Printing on the printer \"%s\""
+msgstr "Drucken auf Drucker „%s“"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Liberia"
-msgstr "Liberia"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sri Lanka"
-msgstr "Sri Lanka"
+msgid "Restore From Tape"
+msgstr "Von Band wiederherstellen"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Liechtenstein"
-msgstr "Liechtenstein"
+msgid "Choose the profile to configure"
+msgstr "WĂ€hlen Sie das Profil, dass eingestellt werden soll"
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Saint Lucia"
-msgstr "St. Lucia"
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lebanon"
-msgstr "Libanon"
+msgid "Backup Now from configuration file"
+msgstr "Jetzt Sicherung anhand der Konfigurationsdatei erstellen."
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Laos"
-msgstr "Laos"
+msgid "Mount points should contain only alphanumerical characters"
+msgstr ""
+"EinhÀngpunkte sollten nur Buchstaben, Ziffern und den Unterstrich unterhalten"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Kazakhstan"
-msgstr "Kasachstan"
+msgid "Restarting printing system..."
+msgstr "Drucksystem neu starten ..."
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Cayman Islands"
-msgstr "Cayman-Inseln"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Kuwait"
-msgstr "Kuwait"
+msgid "See hardware info"
+msgstr "Hardware Informationen anzeigen"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Korea"
-msgstr "Korea"
+msgid "First sector of boot partition"
+msgstr "Erster Sektor der Boot-Partition"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Korea (North)"
+msgid "Printer manufacturer, model"
+msgstr "Druckerproduzent, Modell"
+
+#: ../../printer/data.pm:1
+#, c-format
+msgid "PDQ - Print, Don't Queue"
+msgstr "PDQ - Print, Don't Queue"
+
+#: ../../standalone.pm:1
+#, c-format
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
msgstr ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : MTS einschalten\n"
+"--disable : MTS ausschalten\n"
+"--start : MTS starten\n"
+"--stop : MTS anhalten\n"
+"--adduser : einen existierenden Systemnutzer zu MTS hinzufĂŒgen "
+"(benötigt Nutzernamen)\n"
+"--deluser : einen existierenden Systemnutzer von MTS löschen "
+"(benötigt Nutzernamen)\n"
+"--addclient : einen Client zu MTS hinzufĂŒgen (benötigt MAC Adresse, IP, "
+"NBI Image Name)\n"
+"--delclient : einen Client von MTS löschen (benötigt MAC Adresse, IP, "
+"NBI Image Name)"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "St. Kitts und Nevis"
+msgid "Subnet Mask:"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Comoros"
-msgstr "Komoren"
+msgid "LiLo and Bootsplash themes installation successfull"
+msgstr "Installation des LILO- und Start-Themas erfolgreich."
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Kiribati"
-msgstr "Kiribati"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"Die beiden kritischen Parameter sind die vertikale Wiederholfrequenz\n"
+"(wie oft der gesamte Bildschirm neu angezeigt wird) und insbesondere die\n"
+"horizontale Synchronisationsfrequenz (wie oft Scanlinien angezeigt werden).\n"
+"Es ist SEHR WICHTIG, dass Sie keinen Monitortyp mit einer falschen \n"
+"Synchronisationsrate auswÀhlen, da Sie sonst Ihren Monitor beschÀdigen \n"
+"könnten. Im Zweifelsfall wÀhlen Sie bitte eine konservativere \n"
+"Einstellung."
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Cambodia"
-msgstr "Kambodscha"
+msgid "Modify"
+msgstr "Ändern"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Kyrgyzstan"
-msgstr "Kirgisistan"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
+"\n"
+"Die Befehle „%s“ und „%s“ erlauben es Ihnen ebenfals die Optionen eines "
+"spezeiellen Druckjobs zu konfigurieren. FĂŒgen Sie einfach die gewĂŒnschten "
+"Einstellungen in der Kommandozeile ein, etwa „%s <Datei>“.\n"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Kenya"
-msgstr "Kenia"
+msgid "Need hostname, username and password!"
+msgstr "Brauche Rechnername, Nutzername und Passwort!"
-#: ../../lang.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Japan"
-msgstr "Japan"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
+"WebDAV ist ein Protokoll, dass es Ihnen erlaubt, Webserver-Verzeichnisse\n"
+"einzuhÀngen, sodass Sie diese wie bei lokalen Dateisystemen verwenden\n"
+"können (sofern der Webserver als WebDAV-Server eingerichtet wurde). \n"
+"Falls Sie EinhĂ€ngpunkte fĂŒr WebDAV hinzufĂŒgen wollen, wĂ€hlen Sie\n"
+"„Neu“."
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Jordan"
-msgstr "Jordanien"
+msgid "HardDrake"
+msgstr "HardDrake"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Jamaica"
-msgstr "Jamaika"
+msgid "new"
+msgstr "Neu"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Would you like to try again?"
+msgstr "Möchten Sie einen Drucker konfigurieren?"
+
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Iceland"
-msgstr "Island"
+msgid "Wizard"
+msgstr "Assistent"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Iran"
-msgstr "Iran"
+msgid "Edit selected server"
+msgstr "Änderung des markierten Servers"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Iraq"
-msgstr "Irak"
+msgid "Please choose where you want to backup"
+msgstr "Bitte wÀhlen Sie wohin Sie die Sicherungskopien machen wollen."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "Britisches Territorium im Indischen Ozean"
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr ""
+"Sie mĂŒssen Ihren Rechner neu starten, um die Änderungen \n"
+"der Partitionstabelle wirksam werden zu lassen."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "India"
-msgstr "Indien"
+msgid "Do not include the browser cache"
+msgstr "Die Browser-Caches nicht archivieren."
-#: ../../lang.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Israel"
-msgstr "Israel"
+msgid "Please, choose your keyboard layout."
+msgstr "Bitte wÀhlen Sie Ihren Tastaturtyp."
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
-msgid "Ireland"
-msgstr "Irland"
+msgid "Standard"
+msgstr "Standard"
-#: ../../lang.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Indonesia"
-msgstr "Indonesien"
+msgid "Please choose your mouse type."
+msgstr "Bitte wÀhlen Sie Ihren Maustyp."
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Hungary"
-msgstr "Ungarn"
+msgid "Connect..."
+msgstr "Verbinden ..."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Haiti"
-msgstr "Haiti"
+msgid "Failed to configure printer \"%s\"!"
+msgstr "Konnte Drucker \"%s\" nicht konfigurieren!"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Croatia"
-msgstr "Kroatien"
+msgid "not configured"
+msgstr "Nicht eingerichtet"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Honduras"
-msgstr "Honduras"
+msgid "ISA / PCMCIA"
+msgstr "ISA/PCMCIA"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Heard Island und McDonald Island"
+msgid "About"
+msgstr "Über"
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Hong Kong"
-msgstr "Hong Kong"
+msgid "Proxies configuration"
+msgstr "Proxies einstellen"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "China"
-msgstr "China"
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Guyana"
-msgstr "Guyana"
+msgid "Start: sector %s\n"
+msgstr "Anfang: Sektor %s\n"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Guinea-Bissau"
-msgstr "Guinea-Bissau"
+msgid "Network interface already configured"
+msgstr "Ihr Netzwerk ist bereits konfiguriert"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Guam"
-msgstr "Guam"
+msgid "Couldn't access the floppy!"
+msgstr "Kein Diskettenzugriff möglich!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Guatemala"
-msgstr "Guatemala"
+msgid "connecting to Bugzilla wizard ..."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "South Georgia und die South Sandwich Islands"
+msgid "Mail Server"
+msgstr "E-Mailserver"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Equatorial Guinea"
-msgstr "Äquatorial-Guinea"
+msgid "Please click on a partition"
+msgstr "Bitte klicken Sie auf eine Partition"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Guadeloupe"
-msgstr "Gouadeloupe"
+msgid "Linux"
+msgstr "Linux"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Guinea"
-msgstr "Guinea"
+msgid "Have a nice day!"
+msgstr "Bis bald!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Gambia"
-msgstr "Gambia"
+msgid "across Network"
+msgstr "ĂŒber Netzwerk"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Greenland"
-msgstr "Grönland"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Gibraltar"
-msgstr "Gibraltar"
+msgid "Upgrade %s"
+msgstr "Aktualisiere %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ghana"
-msgstr "Ghana"
+msgid "Select Printer Connection"
+msgstr "WĂ€hlen Sie die Drucker-Anbindung"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "French Guiana"
-msgstr "Französisch Guiana"
+msgid "Scanning for TV channels in progress ..."
+msgstr "Sendersuche ..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Georgia"
-msgstr "Georgien"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
+"Fehler bei der Üertragung via FTP.\n"
+" Bitte korrigieren Sie Ihre FTP-Konfiguration."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Grenada"
-msgstr "Grenada"
+msgid "IP Range Start:"
+msgstr ""
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "United Kingdom"
-msgstr "Großbritannien"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"Der Internet Superserver-Dienst (inetd) startet je nach Bedarf \n"
+"etliche andere Internet-Dienste, so etwa telnet, ftp, rsh oder \n"
+"rlogin. Dies jedoch nur, wenn die entsprechenden Dienste in der \n"
+"Datei „/etc/inetd.conf“ freigeschaltet sind. \n"
+"Schalten Sie diesen Dienst ab, können Sie keine der von inetd \n"
+"verwalteten Dienste mehr zugreifen."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Gabon"
-msgstr "Gabun"
+msgid "the height of the progress bar"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Faroe Islands"
-msgstr "Faröische Inseln"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
+"\n"
+"- via %s auf Rechner %s sichern\n"
-#: ../../lang.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Micronesia"
-msgstr "Mikronesien"
+msgid "Argentina"
+msgstr "Argentinien"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Falkland Inseln"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Fiji"
-msgstr "Fidschi"
+msgid "Domain Name Server"
+msgstr "DomÀnen-Namenserver (DNS)"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Finland"
-msgstr "Finnland"
+msgid "Security Level:"
+msgstr "Sicherheitsebene:"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Ethiopia"
-msgstr "Äthiopien"
+msgid "Mount points must begin with a leading /"
+msgstr "EinhĂ€ngpunkte mĂŒssen mit einem / beginnen."
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Spain"
-msgstr "Spanien"
+msgid "Postfix Mail Server"
+msgstr "Postfix E-Mail-Server"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Eritrea"
-msgstr "Eritrea"
+msgid "Quit without saving"
+msgstr "Beenden ohne speichern"
#: ../../lang.pm:1
#, c-format
-msgid "Western Sahara"
-msgstr "Westsahara"
+msgid "Yemen"
+msgstr "Yemen"
-#: ../../lang.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Egypt"
-msgstr "Ägypten"
+msgid "This product is available on the MandrakeStore Web site."
+msgstr "Sie erhalten das Produkt in unserem WebShop: MadrakeStore."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Estonia"
-msgstr "Estland"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr ""
+"Bitte geben Sie die MaximalgrĂ¶ĂŸe \n"
+"fĂŒr DrakBackup an."
-#: ../../lang.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Ecuador"
-msgstr "Ecuador"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr "=> Es gibt zahlreiche Auswahlmöglichkeiten (%s).\n"
-#: ../../lang.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Algeria"
-msgstr "Algerien"
+msgid "Hard drive detection"
+msgstr "Festplatten suchen"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Dominican Republic"
-msgstr "Dominikanische Republik"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
+"Sie haben keine Paketgruppe ausgewÀhlt\n"
+"Bitte wĂ€hlen Sie die minimale Installation, die Sie wĂŒnschen."
-#: ../../lang.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Dominica"
-msgstr "Dominikanische Republik"
+msgid "Please enter the WebDAV server URL"
+msgstr "Bitte geben Sie die WebDAV-Server URL an"
#: ../../lang.pm:1
#, c-format
-msgid "Denmark"
-msgstr "DĂ€nemark"
+msgid "Tajikistan"
+msgstr "Tadschikistan"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Djibouti"
-msgstr "Djibouti"
+msgid "Accept"
+msgstr "Akzeptieren"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Cyprus"
-msgstr "Zypern"
+msgid "Description"
+msgstr "Beschreibung"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Christmas Island"
-msgstr "Osterinsel"
+msgid "Error opening %s for writing: %s"
+msgstr "Fehler beim Öffnen von %s zum Schreiben: %s"
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Cape Verde"
-msgstr "Kap Verde"
+msgid "Mouse type: %s\n"
+msgstr "Maustyp: %s\n"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Cuba"
-msgstr "Kuba"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr "Ihre Grafikkarte kann mit XFree %s 3D-hardwarebeschleunigt werden."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Colombia"
-msgstr "Kolumbien"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "Bitte wĂ€hlen Sie die GrĂ¶ĂŸe des CD/DVD Mediums (MByte)"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Cameroon"
-msgstr "Kamerun"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Chile"
-msgstr "Chile"
+msgid "Expert Area"
+msgstr "Experten Bereich"
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Cook Islands"
-msgstr "Cook-Inseln"
+msgid "Choose a monitor"
+msgstr "WĂ€hlen Sie Ihren Monitor"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Cote d'Ivoire"
-msgstr "ElfenbeinkĂŒste"
+msgid "Empty label not allowed"
+msgstr "Leere EintrÀge sind nicht erlaubt"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Switzerland"
-msgstr "Schweiz"
+msgid "Maltese (UK)"
+msgstr "Malta (GB)"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Congo (Brazzaville)"
-msgstr "Kongo (Brazzaville)"
+msgid "I can't add any more partition"
+msgstr "Ich kann keinen weiteren Partitionen hinzufĂŒgen"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Central African Republic"
-msgstr "Zentralafrikanische Republik"
+msgid "Size in MB: "
+msgstr "GrĂ¶ĂŸe in MB:"
-#: ../../lang.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Congo (Kinshasa)"
-msgstr "Kongo (Kinshasa)"
+msgid "Remote printer"
+msgstr "Entfernter Drucker"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Cocos (Keeling) Inseln"
+msgid "Please choose a language to use."
+msgstr "Bitte wÀhlen Sie die zu verwendende Sprache."
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Canada"
-msgstr "Kanada"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
+"WARNUNG: Dieses GerÀt wurde bereits zum Herstellen einer Internetverbindung "
+"konfiguriert.\n"
+"DrĂŒcken Sie einfach „OK“, um die Einstellungen zu behalten.\n"
+"Fall Sie Felder verĂ€ndern, wird die Konfiguration ĂŒberschrieben."
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Belize"
-msgstr "Belize"
+msgid "I can set up your computer to automatically log on one user."
+msgstr ""
+"Ich kann Ihren Computer so einrichten, dass ein Benutzer automatisch "
+"angemeldet wird."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Belarus"
-msgstr "Weißrussland"
+msgid "Floppy format"
+msgstr "Diskettenformat"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Botswana"
-msgstr "Botswana"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Bouvet Island"
-msgstr "Bouvet-Insel"
+msgid "Generic Printers"
+msgstr "Generische Drucker"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Bhutan"
-msgstr "Butan"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
+msgstr ""
+"Bitte wÀhlen Sie den Drucker, an den die DruckauftrÀge gehen sollen oder "
+"geben Sie einen GerÀte- oder Dateinamen in der Eingabezeile an."
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "The scanners on this machine are available to other computers"
+msgstr "Die Drucker dieses Rechners sind fĂŒr andere Rechner nutzbar"
+
+#: ../../any.pm:1
#, c-format
-msgid "Bahamas"
-msgstr "Bahamas"
+msgid "First sector of the root partition"
+msgstr "Erster Sektor der Verzeichnisbaumwurzel"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Brazil"
-msgstr "Brasilien"
+msgid "Alternative drivers"
+msgstr "Alternative Treiber"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bolivia"
-msgstr "Bolivien"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
+"\n"
+"Bitte wÀhlen Sie alle benötigten Parameter.\n"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Brunei Darussalam"
-msgstr "Brunei "
+msgid "Initrd"
+msgstr "Init-RamDisk"
#: ../../lang.pm:1
#, c-format
-msgid "Bermuda"
-msgstr "Bermuda"
+msgid "Cape Verde"
+msgstr "Kap Verde"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr "Angabe, ob der Prozessor den Cyrix 6x86 Coma-Fehler aufweist."
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Benin"
-msgstr "Benin"
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Burundi"
-msgstr "Burundi"
+msgid "Guam"
+msgstr "Guam"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Bahrain"
-msgstr "Bahrain"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
+msgstr ""
+"Bitte wÀhlen Sie den Anschluss, an dem der Drucker hÀngt oder geben Sie "
+"einen GerÀte- oder Dateinamen in der Eingabezeile an."
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bulgaria"
-msgstr "Bulgarien"
+msgid "/Options/Test"
+msgstr "/Optionen/Test"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Burkina Faso"
-msgstr "Burkina Faso"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+"Diese Ebene ist mit Vorsicht zu verwenden. Zwar macht sie Ihr System \n"
+"einfacher handhabbar, aber auch leichter angreifbar: In dieser Form darf \n"
+"der Rechner nicht als Netzwerkrechner (LAN oder Modem) verwendet werden, \n"
+"da Angreifer mangels Passwort an Ihre Daten gelangen können!"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Bangladesh"
-msgstr "Bangladesch"
+msgid "Mounting partition %s"
+msgstr "Partition „%s“ einhĂ€ngen"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Barbados"
-msgstr "Barbados"
+msgid "User name"
+msgstr "Benutzerkennzeichen"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Bosnien-Herzegovina"
+msgid "New configuration (isdn-light)"
+msgstr "Neue Konfiguration (isdn-light)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Azerbaijan"
-msgstr "Aserbaidschan"
+msgid "Userdrake"
+msgstr "Userdrake"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Aruba"
-msgstr "Aruba"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "Auf welche Partition wollen Sie Linux4Win installieren?"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Australia"
-msgstr "Australien"
+msgid "Backup system"
+msgstr "System sichern"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "American Samoa"
-msgstr "Samoa"
+msgid "Test pages"
+msgstr "Testseiten"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Argentina"
-msgstr "Argentinien"
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
+"Liste der wiederherzustellenden Daten:\n"
+"\n"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Antarctica"
-msgstr "Antarktis"
+msgid "Checking %s"
+msgstr "Kontrolliere von %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Angola"
-msgstr "Angola"
+msgid "TCP/Socket Printer Options"
+msgstr "Optionen fĂŒr TCP/Socket-Drucker"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Netherlands Antilles"
-msgstr "NiederlÀndische Antillen"
+msgid "Card mem (DMA)"
+msgstr "Karten Mem (DMA)"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Armenia"
-msgstr "Armenien"
+msgid "France"
+msgstr "Frankreich"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Albania"
-msgstr "Albanien"
+msgid "browse"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Anguilla"
-msgstr "Anguilla"
+msgid "Checking installed software..."
+msgstr "Suche nach installierter Software"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Antigua und Barbuda"
+msgid "Remote printer name missing!"
+msgstr "Der Name des entfernten Druckers fehlt!"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "United Arab Emirates"
-msgstr "Vereinigte arabische Emirate"
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "Wollen Sie Drucker im lokalen Netzwerk zum Drucken konfigurieren?\n"
#: ../../lang.pm:1
#, c-format
-msgid "Andorra"
-msgstr "Andorra"
+msgid "Turkey"
+msgstr "TĂŒrkei"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Afghanistan"
-msgstr "Afghanistan"
+msgid "Alcatel speedtouch usb"
+msgstr "Alcatel speedtouch USB"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
+msgid "Number of buttons"
+msgstr "Anzahl Tasten"
-#: ../../loopback.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Schleife bei den EinhÀngpunkten %s\n"
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Vietnam QWERTY („number row“)"
-#: ../../lvm.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Entfernen Sie erst die Logischen Medien\n"
+msgid "Module"
+msgstr "Modul"
-#: ../../modules.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
msgstr ""
-"Die PCMCIA-UnterstĂŒtzung fĂŒr 2.2er Kerne wurde eingestellt. Verwenden Sie "
-"bitte einen 2.4er Kern."
+"Warteschlangen, die nicht mit diesem Programm oder „foomatic-configure“ "
+"ertellt wurden, können nicht ĂŒbertragen werden."
-#: ../../mouse.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "BEWEGEN SIE IHR MAUS-RAD!"
+msgid "Hardware"
+msgstr "Hardware"
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "To activate the mouse,"
-msgstr "Um Ihre Maus zu aktivieren:"
+msgid "Ctrl and Alt keys simultaneously"
+msgstr "Strg und Alt gleichzeitig"
-#: ../../mouse.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Please test the mouse"
-msgstr "Bitte testen Sie Ihre Maus"
+msgid "United States"
+msgstr "Vereinigte Staaten von Amerika"
-#: ../../mouse.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "No mouse"
-msgstr "Keine Maus"
+msgid "Default OS?"
+msgstr "Standard BS"
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "none"
-msgstr "keine"
+msgid "Swiss (German layout)"
+msgstr "Schweiz (deutsches Layout)"
-#: ../../mouse.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "3 buttons"
-msgstr "3 Tasten"
+msgid "Configure all heads independently"
+msgstr "Alle Karten getrennt konfigurieren"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "2 buttons"
-msgstr "2 Tasten"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr ""
+"Bitte wÀhlen Sie den Drucker, den Sie einrichten wollen. Die Einrichtung "
+"wird voll-automatisch erfolgen. Sollte Ihr Drucker nicht richtig erkannt "
+"worden sein oder wollen Sie die Einrichtung selbst vornehmen, wÀhlen Sie "
+"„Manuelle Konfiguration“."
-#: ../../mouse.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "1 button"
-msgstr "1 Taste"
+msgid "NTP Server"
+msgstr "NTP Server"
-#: ../../mouse.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "busmouse"
-msgstr "Bus-Maus"
+msgid "Load/Save on floppy"
+msgstr "Laden von/Speichern auf Diskette"
-#: ../../mouse.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Maus"
+msgid "This theme does not yet have a bootsplash in %s !"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Maus (Seriell, alter C7 Typ)"
+msgid "nice"
+msgstr "angenehm"
-#: ../../mouse.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid "Leaving in %d seconds"
+msgstr "Abbruch in %d Sekunden"
-#: ../../mouse.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "MM Series"
-msgstr "MM Serie"
+msgid "Please choose which serial port your modem is connected to."
+msgstr "Bitte wÀhlen Sie den seriellen Anschluss, an dem Ihr Modem hÀngt."
-#: ../../mouse.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMaus"
+msgid "Country"
+msgstr "Staat"
-#: ../../mouse.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MausMan+/FirstMaus+"
+msgid "Property"
+msgstr "Eigenschaft"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Serie"
+msgid "Ghostscript"
+msgstr "Ghostscript"
-#: ../../mouse.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+msgid "LAN Configuration"
+msgstr "LAN Konfiguration"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MausMan/FirstMaus"
+msgid "Ghana"
+msgstr "Ghana"
-#: ../../mouse.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMaus"
+msgid "Path or Module required"
+msgstr "Pfad oder Modul benötigt"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Generische 3 Tasten Maus"
+msgid "Advanced Options"
+msgstr "Erweiterte Einstellungen"
-#: ../../mouse.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Generische 2 Tasten Maus"
+msgid "Coma bug"
+msgstr "Coma-Fehler"
-#: ../../mouse.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "serial"
-msgstr "Seriell"
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
+"Sie mĂŒssen nun entscheiden, auf welche(n) Partition(en) Ihr neues Mandrake\n"
+"Linux System installiert werden soll. Falls bereits Partitionen existieren\n"
+"(etwa von einer frĂŒheren Installation von GNU/Linux oder durch das Erzeugen\n"
+"mit einem anderen Partitionierungswerkzeug), können Sie diese verwenden.\n"
+"Anderenfalls mĂŒssen Sie Partitionen definieren.\n"
+"\n"
+"Um Partitionen zu erzeugen mĂŒssen Sie erst eine Festplatte wĂ€hlen. Sie\n"
+"können die Platte wĂ€hlen in dem Sie „hda“ fĂŒr die erste IDE-Platte wĂ€hlen,\n"
+"„sda“ fĂŒr die erste SCSI-Platte, usw.\n"
+"\n"
+"Um die gewÀhlte Platte zu partitionieren stehen folgende Möglichkeiten zur\n"
+"VerfĂŒgung:\n"
+"\n"
+" * „%s“: BetĂ€tigen dieser SchaltflĂ€che löscht alle Partitionen auf der\n"
+"markierten Festplatte.\n"
+"\n"
+" * „%s“: Dieser Punkt aktiviert die automatische ext3- und\n"
+"Swap-Partitionen-Erstellung im ungenutzten Bereich Ihrer Festplatte.\n"
+"\n"
+"„%s“: bietet Zugriff auf weitere Möglichkeiten:\n"
+"\n"
+" * „%s“: Falls Sie Ihre aktuelle Partitionstabelle auf Diskette speichern\n"
+"wollen, falls Sie sie spÀter wiederherstellen wollen, können Sie das mit\n"
+"Hilfe dieser SchaltflÀche tun.\n"
+"\n"
+" * „%s“: Mit dieser SchaltflĂ€che können Sie eine vorher auf Diskette\n"
+"gesicherte Partitionstabelle wieder herstellen.\n"
+"\n"
+" * „%s“: Sollte Ihre Partitionstabelle zerstört worden sein, können Sie\n"
+"versuchen, mit dieser SchaltflÀche eine Restaurierung vorzunehmen. Seien\n"
+"Sie vorsichtig! es ist nicht unwahrscheinlich, dass dieser Versuch fehl\n"
+"schlÀgt.\n"
+"\n"
+" * „%s“: Alle Änderungen verwerfen und mit der ursprĂŒnglichen\n"
+"Partitionstabelle neu beginnen.\n"
+"\n"
+" * „%s“: Entfernen dieser Markierung fĂŒhrt dazu, dass die Anwender\n"
+"hinterher die Wechselmedien manuell ein- und aushĂ€ngen mĂŒssen.\n"
+"\n"
+" * „%s“: Falls Sie keine Ahnung haben wie Sie die Festplatte partitionieren\n"
+"sollen, wĂ€hlen Sie diese SchaltflĂ€che. Sie ĂŒberlassen damit die gesamte\n"
+"Arbeit unserem Assistenten, der mittels „Abra Kadabra“(TM) Ihre Platte\n"
+"partitioniert.\n"
+"\n"
+" * „%s“: Mit dieser SchaltflĂ€che können Sie alle Einstellungen rĂŒckgĂ€ngig\n"
+"machen.\n"
+"\n"
+" * „%s“: Anbieten bzw. Maskieren von Zusatzmöglichkeiten.\n"
+"\n"
+" * „%s“: Nachdem Sie das Partitionieren Ihrer Festplatte beendet haben,\n"
+"aktivieren Sie diese SchaltflĂ€che, um Ihre Änderungen zu speichern.\n"
+"\n"
+"Wenn Sie die GrĂ¶ĂŸe einer Partition festlegen wollen, können Sie die\n"
+"Feineinstellungen mit den Rechts- / Links-Pfeiltasten Ihrer Tastatur\n"
+"vornehmen.\n"
+"\n"
+"Information: Sie können alle Einstellungen per Tastatur vornehmen. Mittels\n"
+"[Tab] und den Hoch-/Runter Pfeiltasten bewegen.\n"
+"\n"
+"Wenn eine Partition ausgewÀhlt ist, können Sie mittels:\n"
+"\n"
+" * Ctrl-C - eine neue Partition erstellen (wenn Sie auf einer leeren\n"
+"Partition sind)\n"
+"\n"
+" * Ctrl-D - die Partition löschen\n"
+"\n"
+" * Ctrl-M - dem EinhÀngpunkt festlegen.\n"
+"\n"
+"Um mehr Informationen ĂŒber die verschiedenen Dateisystemtypen zu erhalten,\n"
+"lesen Sie bitte das Kapitel ext2FS in der „Referenz“.\n"
+"\n"
+"Falls Sie die Installation auf einem PPC-Rechner vornehmen, sollten Sie\n"
+"eine mindestens 1MB, große HFS Start-Partition fĂŒr den\n"
+"Betriebssystemstarter yaboot erstellen. Wenn Sie diese Partition etwas\n"
+"grĂ¶ĂŸer dimensionieren, etwa 50MB, haben Sie einen geeigneten Platz, um\n"
+"einen Rettungskern samt RamDisk abzulegen, um in NotfÀllen starten zu\n"
+"können."
-#: ../../mouse.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
+"Grafikkarte\n"
+"\n"
+" DrakX erkennt normalerweise automatisch Ihre Grafikkarte und richtet sie\n"
+"entsprechend ein. Sollten dabei Probleme auftreten, können Sie in der hier\n"
+"aufgefĂŒhrten Liste Ihr Modell auswĂ€hlen.\n"
+"\n"
+" Falls fĂŒr Ihre Karte verschiedene Server zur VerfĂŒgung stehen, etwa mit\n"
+"und ohne 3D-Beschleunigung, werden Sie gebeten, den zu wÀhlen, der Ihren\n"
+"BedĂŒrfnissen am besten entspricht."
-#: ../../mouse.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Wheel"
-msgstr "Rad"
+msgid "There was an error installing packages:"
+msgstr "Bei der Installation der Pakete trat ein Fehler auf:"
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generic"
-msgstr "Generisch"
+msgid "Lexmark inkjet configuration"
+msgstr "Lexmark Tintenstrahl-Konfiguration"
-#: ../../mouse.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid "Undo"
+msgstr "RĂŒckgĂ€ngig"
-#: ../../mouse.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+msgid "Save partition table"
+msgstr "Partitionstabelle schreiben"
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Generische PS2 Rad-Maus"
+msgid "Finnish"
+msgstr "Finnland"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MausMan/FirstMaus (Seriell)"
+msgid "Macedonia"
+msgstr "Mazedonien"
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Standard"
-msgstr "Standard"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
+"Das Teilen zwischen Benutzern verwendet die Gruppe „fileshare“.\n"
+"Sie können UserDrake verwenden, um Benutzerkennzeichen in diese Gruppe "
+"aufzunehmen."
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - Maus"
+msgid "Slovenian"
+msgstr "Slowenien"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Umschalten zwischen unsortiert und gruppiert"
+msgid "Libya"
+msgstr "Lybien"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Collapse Tree"
-msgstr "Baum verkleinern"
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr "Skripte konfigurieren, Software installieren, Dienste starten ..."
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Expand Tree"
-msgstr "Baum erweitern"
+msgid ""
+"\n"
+"- Burn to CD"
+msgstr ""
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Info"
-msgstr "Info"
+msgid "Table"
+msgstr "Tabelle"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Is this correct?"
-msgstr "Ist dies richtig?"
+msgid "I don't know how to format %s in type %s"
+msgstr ""
+"Ich bin nicht in der Lage, %s mit einem Dateisystem vom Typ %s zu "
+"formatieren."
-#: ../../my_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgid "Model"
+msgstr "Modell"
-#: ../../partition_table.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Error writing to file %s"
-msgstr "Fehler beim Schreiben in Datei %s"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
+msgstr ""
-#: ../../partition_table.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Bad backup file"
-msgstr "Fehlerhafte Backup-Datei"
+msgid "Stop Server"
+msgstr "Server stoppen"
-#: ../../partition_table.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Restaurieren aus der Datei %s schlug Fehl: %s"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
+msgstr ""
+"\n"
+"WĂ€hlen Sie sich\n"
+"das Aussehen von\n"
+"LILO und dem\n"
+"Startschirm.\n"
+"Sie können\n"
+"unterschiedliche\n"
+"Varianten wÀhlen."
-#: ../../partition_table.pm:1
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Modem"
+msgstr "Modems"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
msgstr ""
-"Sie haben einen unbenutzten Bereich in Ihrer Partitionstabelle, \n"
-"den ich nicht ansprechen kann. Die einzige Lösung ist, dass Sie \n"
-"Ihre primÀren Partitionen so verschieben, dass der Bereich direkt \n"
-"neben der erweiterten Partition zu liegen kommt."
-#: ../../partition_table.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Diese Rechnerarchitektur kennt keine erweiterten Partitionen"
+msgid "Tuvalu"
+msgstr "Tuvalu"
-#: ../../partition_table.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "mount failed: "
-msgstr "Fehler beim EinhÀngen: "
+msgid "Use auto detection"
+msgstr "Autoerkennung benutzen"
-#: ../../pkgs.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "maybe"
-msgstr "eventuell"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr ""
+"Der GPM-Dienst stellt Ihnen MausunterstĂŒtzung auf Text-Konsolen zur \n"
+"VerfĂŒgung. Sie erhalten damit die Möglichkeit Ausschneiden und \n"
+"EinfĂŒgen von Text wie unter X zu verwenden. In einigen Applikationen \n"
+"können Sie auch Pop-Up-MenĂŒs damit bedienen."
-#: ../../pkgs.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "nice"
-msgstr "angenehm"
+msgid "Started on boot"
+msgstr "Beim Hochfahren gestartet"
-#: ../../pkgs.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "very nice"
-msgstr "sehr angenehm"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
+msgstr ""
-#: ../../pkgs.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "important"
-msgstr "wichtig"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
+msgstr ""
-#: ../../pkgs.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "must have"
-msgstr "unbedingt notwendig"
+msgid "Automatically find available printers on remote machines"
+msgstr "Automatische Suche nutzbarer Drucker auf anderen Rechnern"
-#: ../../raid.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nicht genĂŒgend Partitionen fĂŒr RAID Level %d\n"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
+"\n"
+"- Auf Band an GerÀt %s sichern"
-#: ../../raid.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "mkraid failed"
-msgstr "mkraid schlug Fehl"
+msgid "East Timor"
+msgstr "Ost Timor"
-#: ../../raid.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid schlug Fehl (Möglicherweise fehlen die RAID-Tools)"
+msgid "Del profile..."
+msgstr "Profil löschen..."
-#: ../../raid.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Ich kann keine Partition zu dem _formatierten_ RAID md%d hinzufĂŒgen"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr ""
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Stop"
-msgstr "Stopp"
+msgid "Installing Foomatic..."
+msgstr "Installieren des Pakets Foomatic ..."
-#: ../../services.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Start"
-msgstr "Start"
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "Bitte loggen Sie sich aus, und drĂŒcken Sie Ctrl-Alt-RĂŒcktaste"
-#: ../../services.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "On boot"
-msgstr "Bei BS-Start"
+msgid "detected"
+msgstr "gefunden"
-#: ../../services.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Es existieren leider keine\n"
-"weiteren Informationen zu\n"
-"diesem Dienst."
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr "Das Netzwerk muss neu gestartet werden. Soll ich es neu starten?"
-#: ../../services.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Services and deamons"
-msgstr "Dienste und DĂ€monen"
+msgid "Package: "
+msgstr "Paket:"
-#: ../../services.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "stopped"
-msgstr "gestoppt"
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr "Ich kann „/etc/sysconfig/bootsplash“ nicht anlegen."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "running"
-msgstr "aktiv"
+msgid "SECURITY WARNING!"
+msgstr "SICHERHEITSWARNUNG!"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"WĂ€hlen Sie, welche Dienste\n"
-"automatisch beim Systemstart\n"
-"aktiviert werden sollen"
+msgid "StarOffice"
+msgstr "StarOffice"
-#: ../../services.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Database Server"
-msgstr "Datenbankserver"
+msgid "No, I don't want autologin"
+msgstr "Nein ich will kein Autologin"
-#: ../../services.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Remote Administration"
-msgstr "Fernwartung"
+msgid "Windows Migration tool"
+msgstr "Windows Migrationswerkzeug"
-#: ../../services.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "File sharing"
-msgstr "Gemeinsamer Dateizugriff"
+msgid "All languages"
+msgstr "Alle Sprachen"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Internet"
-msgstr "Internet"
+msgid "Removing %s"
+msgstr "Entferne: %s"
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Printing"
-msgstr "Drucken"
+msgid "Testing your connection..."
+msgstr "Ich teste gerade Ihre Verbindung..."
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgid "Cache size"
+msgstr "CachegrĂ¶ĂŸe"
+
+#: ../../security/level.pm:1
+#, c-format
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
msgstr ""
-"Dieser Dienst startet den X-Font-Server. Er ist notwendig, \n"
-"damit XFree gestartet werden kann!"
+"Passwortabfragen sind nun eingeschaltet, aber die Verwendung als \n"
+"Netzwerkrechner kann hier nicht empfohlen werden."
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "LĂ€dt die Treiber fĂŒr Ihre USB-GerĂ€te."
+msgid "Start sector: "
+msgstr "Anfangssektor: "
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
-msgstr ""
-"Mittels Syslog versuchen zahlreiche Dienste Verlaufsprotokolle \n"
-"in vorgesehene Dateien zu sichern. Es ist sinnvoll Syslog immer \n"
-"aktiviert zu haben."
+msgid "Congo (Brazzaville)"
+msgstr "Kongo (Brazzaville)"
-#: ../../services.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Starten des Sound-Systems Ihres Rechners"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr "Das Paket %s muss installiert sein. Soll ich es installieren?"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Der Dienst rwho erlaubt es Benutzern entfernter Rechner eine Liste\n"
-"momentan angemeldeter Benutzerkennzeichen ĂŒbermittelt zu bekommen \n"
-"(Ă€hnlich wie finger)."
+msgid "Seychelles"
+msgstr "Seychellen"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
msgstr ""
-"Der Dienst rusers ermöglicht es Anwendern anderer Rechner \n"
-"herauszubekommen, welche Benutzerkennzeichen auf diesem Rechner \n"
-"gerade angemeldet sind."
+"PrinterDrake hat den Modellnamen der Selbsterkennung mit den Modellen in der "
+"Datenbank verglichen, um den besten Treiber zu finden. Die Auswahl kann "
+"jedoch falsch sein, etwa wenn Ihr Drucker nicht in der Datenbank vorhanden "
+"ist. Kontrollieren Sie, ob die Wahl korrekt ist und wÀhlen Sie die "
+"SchaltflĂ€che „Das Modell ist richtig“, wenn der Treiber Ihren WĂŒn "
+"entspricht, andernfalls betĂ€gen Sie „Modell auswĂ€hlen“, um die Auswahl "
+"selbst vorzunehmen.\n"
+"\n"
+"Folgender Drucker wurde gefunden:\n"
+"\n"
+"%s"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Der Dienst rstat ermöglicht es Anwendern anderer Rechner des \n"
-"Netzwerks Preformance-Daten dieses Rechners zu erhalten."
+msgid "Bad password on %s"
+msgstr "Schlechtes Passwort auf %s"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
+"\n"
+"There is one unknown printer directly connected to your system"
msgstr ""
-"Der Dienst routed ermöglicht ein automatisches Aktualisieren der \n"
-"IP-Routing-Tabellen mittels RIP Protokoll. Zwar wird RIP in kleinen \n"
-"Netzwerken verwendet, jedoch wird fĂŒr komplexere Netzwerke ein \n"
-"anderer Dienst benötigt."
+"\n"
+"Ich konnte einen unbekannten Drucker direkt an Ihrem Rechner finden."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
-msgstr ""
-"Weist Roh-GerÀten ein blockorientiertes GerÀt (etwa eine\n"
-"Festplattenpartition) zu. Dies wird fĂŒr Anwendungen wie\n"
-"etwa ORACLE Datenbankem oder DVD Spielern benötigt"
+msgid "Zambia"
+msgstr "Sambia"
-#: ../../services.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Dieser Dienst speichert beim Herunterfahren des Rechners den Zustand \n"
-"des Zufallszahlengenerators, um ihn beim nÀchsten Systemstart \n"
-"wieder zu restaurieren. Die QualitÀt erzeugter Zufallszahlen \n"
-"wird dadurch verbessert."
+msgid "Security Administrator (login or email)"
+msgstr "Sicherheitsadministrator (Kennzeichen oder E-Mail)"
-#: ../../services.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
+msgid "Sorry, we support only 2.4 kernels."
msgstr ""
-"Postfix ist ein E-Mail Transport-Dienst. Mit seiner Hilfe werden \n"
-"E-Mails zwischen verschiedenen Rechnern weitergeleitet."
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Mittels portmapper werden RPC-Verbindungen verwaltet, die etwa von \n"
-"den Protokollen NFS und NIS verwendet werden. Auf Rechnern, die \n"
-"solche Server (RPC-basierte) beherbergen, muss dieser Dienst \n"
-"aktiviert sein."
+msgid "Romanian (qwerty)"
+msgstr "RumÀnien (QWERTY)"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA wird normalerweise in Laptops verwendet, um Ethernet-Karten \n"
-"oder Modems verwenden zu können. Dieser Dienst wird nur gestartet, \n"
-"wenn Sie ihn vorher konfiguriert haben. Daher schadet es nicht, \n"
-"wenn Sie ihn auf Rechnern aktivieren, auf denen er nutzlos ist."
+msgid "Under Devel ... please wait."
+msgstr "In Entwicklung, haben Sie noch etwas Geduld ..."
-#: ../../services.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "UnterstĂŒtzung fĂŒr den OKI 4w und kompatible WinDrucker."
+msgid "Czech Republic"
+msgstr "Tschechische Republik"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Schaltet beim Betriebssystemstart automatisch die „Num“-Taste fĂŒr \n"
-"die virtuellen Konsolen und XFree ein."
+msgid "Egypt"
+msgstr "Ägypten"
-#: ../../services.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS ist ein gelÀufiges Protokoll in TCP/IP Netzwerken um Dateien \n"
-"durch verschiedene Rechner gemeinsam nutzen zu können. \n"
-"Der Dienst nfslock stellt Ihnen hierfĂŒr Locking-Mechanismen zur \n"
-"VerfĂŒgung, damit eine Datei nicht durch mehrere Personen \n"
-"gleichzeitig verÀndert werden kann."
+msgid "Old configuration (isdn4net)"
+msgstr "Alte Konfiguration (isdn4net)"
-#: ../../services.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS ist ein gelÀufiges Protokoll in TCP/IP Netzwerken um Dateien \n"
-"durch verschiedene Rechner gemeinsam nutzen zu können. \n"
-"Dieser Dienst stellt Ihnen einen solchen Server zur VerfĂŒgung. \n"
-"Konfiguriert wird er in der Datei „/etc/exports“."
+msgid "Sound card"
+msgstr "Soundkarte"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Dieser Dienst aktiviert NetzwerkgerÀte (etwa Netzwerkkarten), die \n"
-"so konfiguriert wurden, dass sie ab dem Systemstart zur VerfĂŒgung \n"
-"stehen sollen."
+msgid "Import Fonts"
+msgstr "Schriften einbinden"
-#: ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
msgstr ""
-"Dieser Dienst ist verantwortlich dafĂŒr, dass alle Netzwerk-Dateisysteme \n"
-"(NFS) bei Systemstart eingehÀngt werden, etwa SMB (Lan Manager/Windows) \n"
-"und NCP (NetWare)."
+"Sie haben nur eine große FAT Partition \n"
+"(diese enthÀlt hÀufig nur Microsoft DOS/Windows).\n"
+"Ich rate Ihnen, diese Partition erst zu verkleinern\n"
+"(WĂ€hlen Sie sie an und drĂŒcken Sie dann „GrĂ¶ĂŸe verĂ€ndern“)"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"Der Dienst named (BIND) stellt ihnen einen Server zur VerfĂŒgung, \n"
-"mit dessen Hilfe Rechnernamen in IP-Adressen umgesetzt werden. \n"
-"Ein solcher Dienst wird „Domain Name Server“ (DNS) genannt. \n"
-"Falls Sie nur einen Rechner besitzen, mit dem Sie per Modem/ISDN ins \n"
-"Netz gehen, benötigen Sie diesen Dienst nicht."
+msgid "Suppress Temporary Files"
+msgstr "TemporÀre Dateien löschen"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Der Linux Virtual Server kann verwendet werden, um um ein \n"
-"hochperformanten HochverfĂŒgbarkeitsserver aufzusetzen."
+msgid "Change partition type"
+msgstr "Partitionstyp Àndern"
-#: ../../services.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
msgstr ""
-"Der Dienst LPD ist der Drucker-Server Ihres Rechners. Wenn Sie \n"
-"diesen Dienst abschalten werden DruckauftrÀge nicht mehr abgearbeitet.\n"
-"Hauptaufgabe von LPD ist es, DruckauftrÀge an den jeweiligen \n"
-"zustÀndigen Drucker (dieser kann auch einen anderen Rechner hÀngen) \n"
-"zu senden."
+"Auflösung\n"
+"\n"
+" Sie können hier Auflösung und Farbtiefe fĂŒr Ihre Hardware wĂ€hlen.\n"
+"Entscheiden Sie sich, welche Variante Ihren WĂŒnschen am ehesten entspricht\n"
+"(Sie können diese Angaben natĂŒrlich nach der Installation noch Ă€ndern). Sie\n"
+"können sich einen Eindruck anhand des abgebildeten Monitors bilden."
-#: ../../services.pm:1
+#: ../../standalone/draksec:1
+#, c-format
+msgid "Network Options"
+msgstr "Netzwerkoptionen"
+
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
+"Display theme\n"
+"under console"
msgstr ""
-"Linuxconf versucht beim Betriebssystemstart einige Verwaltungsaufgaben \n"
-"auszufĂŒhren."
+"Bildschirm-Thema\n"
+"fĂŒr die Konsole"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-"Automatische Erkennung und Konfiguration neuer Hardware wÀhrend des \n"
-"Betriebssystemstarts."
+msgid "Statistics"
+msgstr "Statistiken"
-#: ../../services.pm:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatische Neuerstellung der Kern-Header in /boot fĂŒr\n"
-"/usr/include/linux/{autoconf,version}.h"
+msgid "(on %s)"
+msgstr "(an %s)"
-#: ../../services.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Dieser Dienst lÀdt die Tastaturbelegung, die in der Datei \n"
-"„/etc/sysconfig/keyboard“ angegeben ist. Mittels „kbdconfig“ \n"
-"können Sie diese Einstellung Àndern. Schalten Sie diesen Dienst ab, \n"
-"mĂŒssen Sie ab dem nĂ€chsten Systemstart mit der amerikanischen \n"
-"Tastatur vorlieb nehmen."
+msgid "MM Series"
+msgstr "MM Serie"
-#: ../../services.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Startet Paketfilterung fĂŒr Linux 2.2er Kerne, um Ihren Rechner \n"
-"durch eine Firewall vor Angriffen aus dem Netz zu schĂŒtzen."
+"A library which defends against buffer overflow and format string attacks."
+msgstr "Eine Bibliothek, die gegen sog. „buffer overflow“-Angriffe schĂŒtzt."
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Der Internet Superserver-Dienst (inetd) startet je nach Bedarf \n"
-"etliche andere Internet-Dienste, so etwa telnet, ftp, rsh oder \n"
-"rlogin. Dies jedoch nur, wenn die entsprechenden Dienste in der \n"
-"Datei „/etc/inetd.conf“ freigeschaltet sind. \n"
-"Schalten Sie diesen Dienst ab, können Sie keine der von inetd \n"
-"verwalteten Dienste mehr zugreifen."
+msgid "average"
+msgstr "Durchschnitt"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache ist ein World-Wide-Web-Server. Mit seiner Hilfe können Sie \n"
-"HTML-Dateien ĂŒber HTTP publizieren. Der Server ist CGI-fĂ€hig."
+msgid "New printer name"
+msgstr "Neuer Druckername"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake fĂŒhrt Hardwaretests durch, und konfiguriert (falls nötig) \n"
-"neue/geÀnderte Hardware."
+msgid "Equatorial Guinea"
+msgstr "Äquatorial-Guinea"
-#: ../../services.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
msgstr ""
-"Der GPM-Dienst stellt Ihnen MausunterstĂŒtzung auf Text-Konsolen zur \n"
-"VerfĂŒgung. Sie erhalten damit die Möglichkeit Ausschneiden und \n"
-"EinfĂŒgen von Text wie unter X zu verwenden. In einigen Applikationen \n"
-"können Sie auch Pop-Up-MenĂŒs damit bedienen."
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Der Befehl cron wird unter UNIX/Linux dazu verwendet, Benutzerprogramme \n"
-"zu vordefinierten regelmĂ€ĂŸigen Zeiten abzuarbeiten. \n"
-"Der Dienst vixie cron erweitert dieses Konzept um weitere Funktionen, etwa \n"
-"ein verbessertes Sicherheitskonzept und einfachere Konfiguration."
+msgid "Build Backup"
+msgstr "Sicherung erstellen"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
msgstr ""
-"Dieser Dienst startet Applikationen der at-Warteschlange wenn der \n"
-"dafĂŒr vorgesehene Zeitpunkt erreicht ist. LĂ€sst die Systemauslastung \n"
-"es zu, werden sog. Batch-Anwendungen gestartet."
+"Verwenden Sie einen der Befehle „%s <Datei>“ oder „%s <Datei>“, um die Datei "
+"<Datei> in der Kommandozeile auszudrucken.\n"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+msgid "Currently, no alternative possibility is available"
msgstr ""
-"Der APM-Dienst (apmd) wird von Laptops verwendet, um den Ladestatus \n"
-"der Batterie durch den Syslog-Dienst erfassen zu lassen. Mit seiner \n"
-"Hilfe kann man den Rechner auch rechtzeitig herunterfahren lassen, \n"
-"bevor die Batterien leer sind."
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr ""
-"Mit dem Dienst anacron können cron-Prozesse auch zu anderen als den \n"
-"vorgegebenen Zeiten gestartet werden. Dies ist vor Allem dann \n"
-"sinnvoll, wenn Ihr Rechner nicht rund um die Uhr lÀuft, da sonst \n"
-"Prozesse, die etwa zwischen Mitternacht und 6:00 Uhr gestartet \n"
-"werden sollten, nie ausgefĂŒhrt wĂŒrden."
+msgid "Romanian (qwertz)"
+msgstr "RumÀnien (QWERTZ)"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Write Config"
+msgstr "Konfiguration speichern"
#: ../../services.pm:1
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Startet das ALSA (Advanced Linux Sound Architecture) Sound System"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+"Der Dienst routed ermöglicht ein automatisches Aktualisieren der \n"
+"IP-Routing-Tabellen mittels RIP Protokoll. Zwar wird RIP in kleinen \n"
+"Netzwerken verwendet, jedoch wird fĂŒr komplexere Netzwerke ein \n"
+"anderer Dienst benötigt."
-#: ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installing packages..."
-msgstr "Pakete Installieren ..."
+msgid "Kiribati"
+msgstr "Kiribati"
-#: ../../standalone.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+"Allow/Forbid remote root login."
msgstr ""
-"\n"
-"Verwendung: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-#: ../../standalone.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
+msgid "Browse"
msgstr ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
-#: ../../standalone.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+msgid "CDROM"
+msgstr "CD-ROMs"
-#: ../../standalone.pm:1
+#: ../../network/tools.pm:1
+#, c-format
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "Möchten Sie jetzt versuchen eine Internetverbindung aufzubauen?"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belgian"
+msgstr "Belgien"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you have an ISA sound card?"
+msgstr "VerfĂŒgen Sie ĂŒber eine ISA soundkarte?"
+
+#: ../../network/ethernet.pm:1
#, c-format
msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
msgstr ""
-"[OPTION]...\n"
-" --no-confirmation keine Fragen im MandrakeUpdate Modus stellen\n"
-" --no-verify-rpm Paketsignaturen nicht ĂŒberprĂŒfen\n"
-" --changelog-first Änderungsprotokoll vor Dateiliste anzeigen\n"
-" --merge-all-rpmnew Zusammenlegen aller .rpmnew/.rpmsave Dateien "
-"vorschlagen"
+"Ich habe keine Ethernet-Netzwerkkarte finden können, daher kanndieser "
+"Verbindungstyp nicht konfiguriert werden."
-#: ../../standalone.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "Windows"
+msgstr "Windows"
-#: ../../standalone.pm:1
+#: ../../common.pm:1
#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
+msgid "Can't make screenshots before partitioning"
msgstr ""
-"[OPTIONS]\n"
-"Anwendung zur Verbindung und Überwachung von Netzwerk und Internet\n"
-"\n"
-"--defaultintf interface : zeige diese Schnittstelle als Voreinstellung\n"
-"--connect : verbinde mit dem Internet wenn nicht schon verbunden\n"
-"--disconnect : trenne vom Internet wenn verbunden\n"
-"--force : bei (dis)connect : erzwinge Verbinden/Trennen.\n"
-"--status : gibt 1 zurĂŒck wenn verbunden sonst 0, beendet sich danach.\n"
-"--quiet : nicht interaktiv. benutzt mit (dis)connect."
+"Vor der Partitionierung kann ich keine Bildschirm-SchnappschĂŒsse machen."
-#: ../../standalone.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr "[--file=datei] [--word=word] [--explain=ausdruck] [--alert]"
+msgid "Host Name"
+msgstr "Rechnername"
-#: ../../standalone.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "[keyboard]"
-msgstr "[Tastatur]"
+msgid "/File/Save _As"
+msgstr "/Datei/Speichern _unter ..."
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
msgstr ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : MTS einschalten\n"
-"--disable : MTS ausschalten\n"
-"--start : MTS starten\n"
-"--stop : MTS anhalten\n"
-"--adduser : einen existierenden Systemnutzer zu MTS hinzufĂŒgen "
-"(benötigt Nutzernamen)\n"
-"--deluser : einen existierenden Systemnutzer von MTS löschen "
-"(benötigt Nutzernamen)\n"
-"--addclient : einen Client zu MTS hinzufĂŒgen (benötigt MAC Adresse, IP, "
-"NBI Image Name)\n"
-"--delclient : einen Client von MTS löschen (benötigt MAC Adresse, IP, "
-"NBI Image Name)"
-#: ../../standalone.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
+msgid "%s is not in the scanner database, configure it manually?"
msgstr ""
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
-msgstr ""
-"[OPTIONEN] [PROGRAMMNAME]\n"
-"\n"
-"OPTIONEN:\n"
-" --help - Asgabe dieses Hilfetextes.\n"
-" --report - Name eines Mandrake Programms.\n"
-" --incident - Name eines Mandrake Programms."
+msgid "Delay before booting default image"
+msgstr "Wartezeit vorm Starten des Standard Betriebssystems"
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default : save default directories.\n"
-"--debug : show all debug messages.\n"
-"--show-conf : list of files or directories to backup.\n"
-"--config-info : explain configuration file options (for non-X "
-"users).\n"
-"--daemon : use daemon configuration. \n"
-"--help : show this message.\n"
-"--version : show version number.\n"
-msgstr ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Archivierungs- und Restaurierungs-Programm\n"
-"\n"
-"--default - Speichern der Standardverzeichnisse.\n"
-"--debug - Ausgabe aller Debug-Informationen.\n"
-"--show-conf - Liste der zu archivierenden Dateien/Verzeichnisse.\n"
-"--config-info - ErklĂ€rung der Konfigurationsdatei-Parameter (fĂŒr nicht-X "
-"Anwender).\n"
-"--daemon - Verwende die Dienst-Konfiguration. \n"
-"--help - Asgabe dieses Hilfetextes.\n"
-"--version - Ausgabe der Versionsnummer.\n"
+msgid "Restrict command line options"
+msgstr "Gebrauch der Kommandozeilen-Parameter einschrÀnken"
-#: ../../standalone.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
-"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
-"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-msgstr ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
-"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
-"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+msgid "East Europe"
+msgstr "Osteuropa"
-#: ../../steps.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Exit install"
-msgstr "Installation beenden"
+msgid "Use free space"
+msgstr "Freien Platz verwenden"
-#: ../../steps.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Install updates"
-msgstr "Aktualisierungen installieren"
+msgid "use dhcp"
+msgstr "DHCP verwenden"
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Configure services"
-msgstr "Dienste konfigurieren"
+msgid "Mail alert"
+msgstr "E-Mail Benachrichtigung"
-#: ../../steps.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Configure X"
-msgstr "X konfigurieren"
+msgid "Internet configuration"
+msgstr "Internet Konfiguration"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Install bootloader"
-msgstr "BS-Starter installieren"
+msgid "Uzbekistan"
+msgstr "Usbekistan"
-#: ../../steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configure networking"
-msgstr "Netzwerk konfigurieren"
+msgid "Detected %s"
+msgstr "%s gefunden"
-#: ../../steps.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Add a user"
-msgstr "Benutzer hinzufĂŒgen"
+msgid "/Autodetect _printers"
+msgstr "/_Drucker automatisch erkennen"
-#: ../../steps.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "Root password"
-msgstr "Root Passwort"
+msgid "Finish"
+msgstr "Assistent beenden"
-#: ../../steps.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Install system"
-msgstr "System installieren"
+msgid "Show automatically selected packages"
+msgstr "Anzeige automatisch markierter Pakete"
-#: ../../steps.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Choose packages to install"
-msgstr "Zu installierende Pakete"
+msgid "CPU flags reported by the kernel"
+msgstr ""
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Format partitions"
-msgstr "Partitionen formatieren"
+msgid "Togo"
+msgstr "Togo"
-#: ../../steps.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Partitioning"
-msgstr "Partitionierung"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr "Es trat ein Fehler auf! Ist „mkisofs“ installiert?"
-#: ../../steps.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Choose your keyboard"
-msgstr "Tastatur auswÀhlen"
+msgid "16 MB"
+msgstr "16 MB"
-#: ../../steps.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Select installation class"
-msgstr "Installationsart auswÀhlen"
+msgid "Please try again"
+msgstr "Bitte versuchen Sie es erneut"
-#: ../../steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hard drive detection"
-msgstr "Festplatten suchen"
+msgid "The model is correct"
+msgstr "Das Modell ist richtig"
-#: ../../steps.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Configure mouse"
-msgstr "Maus konfigurieren"
+msgid "FAT resizing failed: %s"
+msgstr "FAT GrĂ¶ĂŸenanpassung schlug Fehl: %s"
-#: ../../steps.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "License"
-msgstr "Lizenz"
+msgid "Individual package selection"
+msgstr "Individuelle Paketauswahl"
-#: ../../steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Language"
-msgstr "Sprache auswÀhlen"
+msgid "This partition is not resizeable"
+msgstr "Die GrĂ¶ĂŸe dieser Partition kann ich nicht Ă€ndern"
-#: ../../ugtk2.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "utopia 25"
-msgstr "utopia 25"
+msgid "Location"
+msgstr "Standort"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "OK"
-msgstr " Ok "
+msgid "USA (cable-hrc)"
+msgstr "USA (Kabel-hrc)"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "logdrake"
-msgstr "LogDrake"
+msgid "Journalised FS"
+msgstr "Journalisierendes FS"
-#: ../../ugtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgid "Guatemala"
+msgstr "Guatemala"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (Installationsbildschirmtreiber)"
+msgid "This machine"
+msgstr "Dieser Rechner"
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "DOS Laufwerksbuchstabe: %s (vermutlich?)\n"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select the files or directories and click on 'OK'"
msgstr ""
-"Ihre Karte kann 3D-hardwarebeschleunigt werden, allerdings nur mit \n"
-"XFree %s. BEMERKUNG: DIESE FUNKTION IST NOCH IM EXPERIMENTIERSTADIUM \n"
-"UND KANN ZUM STEHENBLEIBEN IHRES RECHNERS FÜHREN."
+"WÀhlen Sie die Dateien oder Verzeichnisse und betÀtigen Sie die SchaltflÀche "
+"„HinzufĂŒgen“"
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s mit EXPERIMENTELLER 3D-Hardwarebeschleunigung"
+msgid "Bahrain"
+msgstr "Bahrain"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Ihre Grafikkarte kann mit XFree %s 3D-hardwarebeschleunigt werden."
+msgid "omit scsi modules"
+msgstr " SCSI Module weglassen "
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s mit 3D-Hardwarebeschleunigung"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr "CPU-Familie (6 steht etwa fĂŒr i686)."
-#: ../../Xconfig/card.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
msgstr ""
-"Ihre Karte kann 3D-hardwarebeschleunigt werden, allerdings nur mit \n"
-"XFree %s. BEM: DIESE FUNKTION IST NOCH IM EXPERIMENTIERSTADIUM UND KANN \n"
-"ZUM STEHENBLEIBEN IHRES RECHNERS FÜHREN. Ihre Karte wird auch von \n"
-"XFree %s unterstĂŒtzt, wodurch Sie bessere 2D-UnterstĂŒtzung erhalten \n"
-"können."
+"Da Sie eine Netzwerkinstallation durchfĂŒhren, ist Ihr Netzwerk bereits\n"
+"konfiguriert. WĂ€hlen Sie „OK“, um diese Einstellung beizubehalten oder\n"
+"„Abbruch“, um Ihre Internet- und Netzwerk-Konfiguration neu zu\n"
+"konfigurieren.\n"
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Keyboard layout: %s\n"
+msgstr "Tastaturtyp: %s\n"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
msgstr ""
-"Ihre Grafikkarte kann 3D-hardwarebeschleunigt werden, allerdings nur mit \n"
-"XFree %s. Ihre Karte wird auch von XFree %s unterstĂŒtzt, wodurch Sie \n"
-"bessere 2D-UnterstĂŒtzung erhalten können."
+"Hier können Sie einstellen, ob die Drucker, die an diesem Rechner hÀngen, "
+"fĂŒr andere Rechner nutzbar sein sollen und falls ja, fĂŒr welche."
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
+msgid "Maltese (US)"
+msgstr "Malta (USA)"
-#: ../../Xconfig/card.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Nur Karte „%s“ (%s) konfigurieren"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"Dieser Dienst ist verantwortlich dafĂŒr, dass alle Netzwerk-Dateisysteme \n"
+"(NFS) bei Systemstart eingehÀngt werden, etwa SMB (Lan Manager/Windows) \n"
+"und NCP (NetWare)."
-#: ../../Xconfig/card.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Use Xinerama extension"
-msgstr "Xinerama Erweiterung verwenden"
+msgid "Tvcard"
+msgstr "TV-Karten"
-#: ../../Xconfig/card.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Toggle between normal/expert mode"
+msgstr "In den Normal-Modus wechseln"
+
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Configure all heads independently"
-msgstr "Alle Karten getrennt konfigurieren"
+msgid "Size"
+msgstr " GrĂ¶ĂŸe "
-#: ../../Xconfig/card.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "GRUB"
+msgstr "GB"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Welche XFree-Konfiguration wollen Sie verwenden?"
+msgid "Greenland"
+msgstr "Grönland"
-#: ../../Xconfig/card.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "XFree configuration"
-msgstr "XFree konfigurieren"
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MausMan+/FirstMaus+"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "WĂ€hlen Sie die SpeichergrĂ¶ĂŸe Ihrer Grafikkarte"
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"Ihr System unterstĂŒtzt die gleichzeitige Verwendung mehrerer Monitore.\n"
-"Was wollen Sie?"
+"Es wurde bereits eine geteilte Internet-Verbindung aufgesetzt.\n"
+"Momentan ist sie aktiviert.\n"
+"\n"
+"Was wollen Sie tun?"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Multi-head configuration"
-msgstr "Mehrmonitor-Einstellung"
+msgid "Delete All NBIs"
+msgstr "Alle NBIs löschen"
-#: ../../Xconfig/card.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Choose an X server"
-msgstr "WĂ€hlen Sie einen X Server"
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
+msgstr ""
+"DrakX bietet Ihnen einen Dialog mit verschiedenen Auswahlmöglichkeiten.\n"
+"\n"
+" * „%s“: Hier erhalten Sie drei Alternativen:\n"
+"\n"
+" * „%s“: Falls Sie grub (TextmenĂŒ) bevorzugen.\n"
+"\n"
+" * „%s“: Falls Sie LILO mit TextmenĂŒ als Ihren Favoriten ansehen.\n"
+"\n"
+" * „%s“: Falls Sie LILO mit seiner grafischen OberflĂ€che bevorzugen.\n"
+"\n"
+" * „%s“: Normalerweise mĂŒssen Sie hier nichts Ă€ndern („%s“), Sie könnten\n"
+"jedoch den Starter auch auf der zweiten Platte installieren, („%s“) oder\n"
+"sogar auf einer Diskette („%s“).\n"
+"\n"
+" * „%s“: Wenn Sie Ihren Rechner neu starten erhalten Sie im MenĂŒ der zur\n"
+"VerfĂŒgung stehenden BSe eine gewisse Zeit um auszuwĂ€hlen, was Sie starten\n"
+"möchten. Sollten Sie wÀhrend dieser Zeit keine Wahl getroffen haben, wird\n"
+"Ihr Standard-BS gestartet.\n"
+"\n"
+"!! Machen Sie sich klar, dass Sie sich selbst darum kĂŒmmern mĂŒssen,\n"
+"irgendwie Ihr Mandrake Linux-System zu starten, wenn Sie hier keinen\n"
+"Betriebssystemstarter installieren (durch Auswahl von „%s“). Stellen Sie\n"
+"auch sicher, dass Sie wissen was Sie tun, wenn Sie hier Einstellungen\n"
+"verÀndern ... !!\n"
+"\n"
+"Durch wĂ€hlen der SchaltflĂ€che „%s“ erhalten Sie etliche Optionen, die dem\n"
+"fortgeschrittenen Anwender vorbehalten bleiben."
-#: ../../Xconfig/card.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "X server"
-msgstr "X Server"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
+msgstr ""
+"Wenn ausgefĂŒllt, wird E-Mail an diese Adresse geschickt, sonst an „root“."
#: ../../Xconfig/card.pm:1
#, c-format
-msgid "64 MB or more"
-msgstr "64 MB oder mehr"
+msgid "Which configuration of XFree do you want to have?"
+msgstr "Welche XFree-Konfiguration wollen Sie verwenden?"
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "32 MB"
-msgstr "32 MB"
+msgid "More"
+msgstr "Mehr"
-#: ../../Xconfig/card.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "16 MB"
-msgstr "16 MB"
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+"Mit dieser Sicherheitsebene wird es möglich, das System als einen \n"
+"Server zu verwenden.\n"
+"Die Sicherheit ist nun ausreichend hoch, um das System als Server \n"
+"einzusetzen, der einer Vielzahl von Klienten einen Verbindungsaufbau \n"
+"erlaubt. Es sei hier angemerkt, dass Ihr Rechner, wenn Sie nur als \n"
+"Klient ins Internet gehen, besser eine niedrigere Sicherhetsebene \n"
+"verwenden sollte."
-#: ../../Xconfig/card.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "8 MB"
-msgstr "8 MB"
+msgid "Account Password"
+msgstr "Passwort"
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "4 MB"
-msgstr "4 MB"
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
+msgstr ""
+"Sie haben sich entschieden, Ihren Betriebssystemstarter auf einer Partition "
+"zu starten.\n"
+"Das impliziert, dass Sie einen anderen Betriebssystemstarter im Master-Boot-"
+"Record haben (etwa System Commander).\n"
+"\n"
+"Von welchem Verzeichnis wollen Sie starten?"
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "2 MB"
-msgstr "2 MB"
+msgid "Tajik keyboard"
+msgstr "Tadschikistan"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "1 MB"
-msgstr "1 MB"
+msgid ""
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
+msgstr ""
+"Sie können die Druckerkonfiguration, die Sie fĂŒr den Spooler „%s“ "
+"vorgenommen haben fĂŒr „%s“, ihren aktuellen Spooler, verwenden. Alle Daten "
+"(Name, Beschreibung, Standort, Verbindungsart und standard "
+"Optionseinstellungen) werden ĂŒbernommen, Druckjobs in der alten "
+"Warteschlange gehen jedoch verloren.\n"
+"Nicht alle Warteschlangen können ĂŒbernommen werden:\n"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "512 kB"
-msgstr "512 KB"
+msgid "Font List"
+msgstr "Font-Liste"
-#: ../../Xconfig/card.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "256 kB"
-msgstr "256 KB"
+msgid ""
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
+msgstr ""
+"Sie mĂŒssen Ihr Open Firmware StartgerĂ€t anpassen, dass es den \n"
+"BS-Starter erkennt. Falls Sie beim Neustart nicht die \n"
+"Eingabeaufforderung des BS-Starters sehen, drĂŒcken Sie \n"
+"Strg-Option-O-F und geben Sie folgendes ein:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+"Tippen Sie dann: shut-down\n"
+"Beim darauffolgenden Neustart sollte Sie die Eingabeaufforderung sehen."
-#: ../../Xconfig/main.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
msgstr ""
-"Die Änderungen beibehalten?\n"
-"Momentan wÀre dies:\n"
-"\n"
-"%s"
+"Sie scheinen einen „OldWorld“ oder unbekannten\n"
+"Rechner zu verwenden. Der Betriebssystemstarter\n"
+"„yaboot“ wird daher leider nicht funktionieren.\n"
+"Die Installation wird fortgesetzt, sie werden jedoch \n"
+"„BootX“ verwenden mĂŒssen um LINUX auf Ihrem Rechner\n"
+"zu starten."
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Options"
-msgstr "Optionen"
+msgid "Select file"
+msgstr "Datei auswÀhlen"
-#: ../../Xconfig/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Test"
-msgstr "Test"
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
+msgstr ""
+"WĂ€hlen Sie Netzwerke bzw. Rechner, denen lokale Drucker bekannt gemacht "
+"werden sollen:"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Resolution"
-msgstr "Auflösung"
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr ""
+"Sie können diese Befehle auch in der „Druck-Kommando“-Zeile des Druckdialogs "
+"zahlreicher Anwendungen angeben, lassen Sie jedoch den Dateinamen weg, da "
+"die zu druckende Datei von der Anwendung geliefert wird.\n"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor"
-msgstr "Monitor"
+msgid "Japan"
+msgstr "Japan"
-#: ../../Xconfig/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Graphic Card"
-msgstr "Grafikkarte"
+msgid "Print option list"
+msgstr "Liste der Drucker-Optionen"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/localedrake:1
#, c-format
-msgid "Vertical refresh rate"
-msgstr "Vertikale Wiederholfrequenz"
+msgid "The change is done, but to be effective you must logout"
+msgstr ""
+"Die Einstellungen wurden vorgenommen, werden jedoch erst nach einer "
+"Neuanmeldung wirksam"
-#: ../../Xconfig/monitor.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Horizontale Wiederholfrequenz"
+msgid "Search servers"
+msgstr "Server suchen"
-#: ../../Xconfig/monitor.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "NCP queue name missing!"
+msgstr "Der NCP Warteschlangen-Name fehlt!"
+
+#: ../../standalone/net_monitor:1
#, c-format
msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
+"Warning, another internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"Die beiden kritischen Parameter sind die vertikale Wiederholfrequenz\n"
-"(wie oft der gesamte Bildschirm neu angezeigt wird) und insbesondere die\n"
-"horizontale Synchronisationsfrequenz (wie oft Scanlinien angezeigt werden).\n"
-"Es ist SEHR WICHTIG, dass Sie keinen Monitortyp mit einer falschen \n"
-"Synchronisationsrate auswÀhlen, da Sie sonst Ihren Monitor beschÀdigen \n"
-"könnten. Im Zweifelsfall wÀhlen Sie bitte eine konservativere \n"
-"Einstellung."
+"WARNUNG: Es wurde bereits eine Internetverbindung gefunden. Vielleicht nutzt "
+"diese ihr Netzwerk."
-#: ../../Xconfig/monitor.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr "Das Plug'n'Play testen schlug fehl. Bitte wÀhlen Sie einen Monitor."
+msgid "Cd-Rom labeled \"%s\""
+msgstr "CD-ROM „%s“"
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "Vendor"
-msgstr "Hersteller"
+msgid ""
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
+msgstr ""
+"Dieser Dienst speichert beim Herunterfahren des Rechners den Zustand \n"
+"des Zufallszahlengenerators, um ihn beim nÀchsten Systemstart \n"
+"wieder zu restaurieren. Die QualitÀt erzeugter Zufallszahlen \n"
+"wird dadurch verbessert."
-#: ../../Xconfig/monitor.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Plug'n Play"
-msgstr "Plug'n'Play"
+msgid ""
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
+msgstr ""
+"Es traten Fehler beim Kontrollieren des Dateisystems %s auf. Wollen Sie, "
+"dass ich versuche sie zu beheben? (Achtung: das kann zu Datenverlust fĂŒhren)"
-#: ../../Xconfig/monitor.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Choose a monitor"
-msgstr "WĂ€hlen Sie Ihren Monitor"
+msgid "Turn your computer into a reliable server"
+msgstr "Verwandeln Sie Ihren Rechner in einen zuverlÀssigen Server."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Graphics card: %s"
-msgstr "Grafikkarte: %s"
+msgid " (driver %s)"
+msgstr " (Treiber %s)"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "WÀhlen Sie bitte Auflösung und Farbtiefe"
+msgid ""
+"Loopback file(s):\n"
+" %s\n"
+msgstr ""
+"Loopback Datei(en):\n"
+" %s\n"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Resolutions"
-msgstr "Auflösungen"
+msgid "I don't know"
+msgstr "Keine Ahnung"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 Milliarden Farben (32 Bit)"
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr ", TCP/IP Drucker „%s“, Port %s"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 Millionen Farben (24 Bit)"
+msgid ""
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
+msgstr ""
+"Sie sind dabei, eine Auto-Installationsdiskette zu erstellen. Diese\n"
+"Möglichkeit ist gefÀhrlich und sollte mit Vorsicht verwendet werden!\n"
+"\n"
+"Sie können mit diesem Werkzeug die Installation, die Sie auf Ihrem\n"
+"Rechner erneut durchspielen, wobei Sie an einigen Stellen interaktiv\n"
+"Einfluss nehmen zu können.\n"
+"\n"
+"Aus SicherheitsgrĂŒnden wird die Partitionierung und Formatierung nie\n"
+"automatisch durchgefĂŒhrt.\n"
+"\n"
+"Wollen Sie fortfahren?"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65.000 Farben (16 Bit)"
+msgid ""
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
+msgstr ""
+"\n"
+"\n"
+"Ihre Karte verwendet momentan den %s „%s“ Treiber (Voreinstellung fĂŒr Ihre "
+"Karte ist „%s“)"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32.000 Farben (15 Bit)"
+msgid "Post Uninstall"
+msgstr "Nach dem Entfernen"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 Farben (8 Bit)"
+msgid " ("
+msgstr " ("
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Is this the correct setting?"
-msgstr "Ist dies die richtige Einstellung?"
+msgid "Cpuid level"
+msgstr "CPUID Ebene"
-#: ../../Xconfig/test.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Abbruch in %d Sekunden"
+msgid "Mongolian (cyrillic)"
+msgstr "Mongolei (Kyrillisches Layout)"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
-msgstr ""
-"Es trat ein Fehler auf:\n"
-"%s\n"
-"Versuchen Sie, einen Parameter zu Àndern."
+msgid "Add a module"
+msgstr "Modul hinzufĂŒgen"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Warnung: Testen dieser Grafikkarte kann Ihren Rechner anhalten"
+msgid "Profile to delete:"
+msgstr "Zu löschendes Profil: "
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Möchten Sie die vorgenommenen Einstellungen prĂŒfen?"
+msgid "Local measure"
+msgstr "Lokale Messung"
-#: ../../Xconfig/test.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Test of the configuration"
-msgstr "PrĂŒfen der Einstellungen"
+msgid "busmouse"
+msgstr "Bus-Maus"
-#: ../../Xconfig/various.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "What norm is your TV using?"
-msgstr "Um welche Fernsehnorm handelt es sich?"
+msgid "Account Login (user name)"
+msgstr "Kennzeichen (Login)"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Fdiv bug"
+msgstr ""
+
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
+"drakfirewall configurator\n"
"\n"
-"Do you have this feature?"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
msgstr ""
-"Ihre Grafikkarte scheint einen TV-Ausgang zu haben, der mittels Frame-Buffer "
-"angesprochen werden kann.\n"
-"\n"
-"Wenn Sie das wĂŒnschen, schließen Sie bitte Ihren Fernseher an die "
-"Grafikkarte an, bevor Sie den Rechner neu starten.\n"
-"WĂ€hlen Sie „TV-Ausgang“ im Betriebssystemstarter.\n"
+"DrakFirewall Konfigurierer\n"
"\n"
-"Haben Sie einen solchen Ausgang und wollen Sie ihn verwenden?"
+"Stellen Sie sicher, dass Sie Ihre Netzwerk-/Internetverbindung\n"
+"mit DrakConnect eingerichtet haben, bevor Sie fortfahren."
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
-msgstr ""
-"Ich kann GNU/Linux so einrichten, dass bei jedem Systemstart\n"
-"automatisch die grafische OberflÀche (= der X Server) aktiviert wird.\n"
-"Wollen Sie, dass X nach jedem Neustart direkt zur VerfĂŒgung steht?"
+msgid "Benin"
+msgstr "Benin"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Graphical interface at startup"
-msgstr "X zur Startzeit"
+msgid "Uruguay"
+msgstr "Uruguay"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 Treiber: %s\n"
+msgid "Path selection"
+msgstr "Pfad-Auswahl"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 Server: %s\n"
+msgid "Name/IP address of host:"
+msgstr "Name/IP-Adresse des Rechners:"
#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Resolution: %s\n"
-msgstr "Auflösung: %s\n"
+msgid "Monitor: %s\n"
+msgstr "Monitor: %s\n"
-#: ../../Xconfig/various.pm:1
+#: ../../partition_table/raw.pm:1
#, c-format
-msgid "Color depth: %s\n"
-msgstr "Farbtiefe: %s\n"
+msgid ""
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
+msgstr ""
+"Mit Ihrer Platte stimmt etwas nicht!\n"
+"Der vorgenommene IntegritÀtstest schlug Fehl.\n"
+"Das bedeutet, dass jeder Schreibvorgang auf der Platte zu zufÀlligen oder "
+"beschĂ€digten Daten fĂŒhren wird."
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Grafikkartenspeicher: %s KB\n"
+msgid "Printer host name or IP missing!"
+msgstr "Der Rechnername, bzw die IP-Adresse des Druckers fehlt!"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Grafikkarte: %s\n"
+msgid "Please check all users that you want to include in your backup."
+msgstr ""
+"Bitte wÀhlen Sie alle Kennzeichen, deren Dateinen mitgesichert werden sollen."
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitor Vert. Frequenz: %s\n"
+msgid ""
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
+msgstr ""
+"Der Scanner „%s“ Scanner muss von PrinterDrake konfiguriert werden.\n"
+"Sie können PrinterDrake im Mandrake-Kontrollzentrum im Hardware-Bereich "
+"starten."
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitor Horiz. Frequenz: %s\n"
+msgid "Bangladesh"
+msgstr "Bangladesch"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
+msgid "Japan (cable)"
+msgstr "Japan (Kabel)"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Mausschnittstelle: %s\n"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"Willkommen zum Druckerassistenten\n"
+"\n"
+"Dieser Assistent möchte Ihnen helfen, Ihre(n) lokalen und Netzwerkdrucker "
+"sowie Drucker an Windowsrechnern im lokalen Netz zu konfigurieren.\n"
+"\n"
+"Falls Sie Drucker haben, die direkt mit dem Rechner verbunden sind, stellen "
+"Sie sicher, dass diese richtig angeschlossen und eingeschaltet sind. Ebenso "
+"mĂŒssen die Netzwerkdrucker bzw. Windows-Rechner eingeschaltet sein.\n"
+"\n"
+"Es sei angemerkt, dass sie Erkennung von Netzwerkdruckern etwas lÀnger "
+"dauert, als das Finden von Druckern, die direkt an Ihrem Rechner hÀngen. Sie "
+"sollten daher diesen Punkt ausschalten, sofern Sie nur direkt am Rechner "
+"hÀngende Drucker verwenden wollen.\n"
+"\n"
+"BetĂ€tigen Sie die SchaltflĂ€che „Weiter“, wenn Sie soweit sind, bzw. "
+"„Abbruch“, wenn Sie keine Drucker konfigurieren wollen."
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Maustyp: %s\n"
+msgid "Initial tests"
+msgstr "Vortests"
-#: ../../Xconfig/various.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tastaturtyp: %s\n"
+msgid "Continue"
+msgstr "Fortfahren"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Options: %s"
-msgstr "Optionen: %s"
+msgid "Custom Restore"
+msgstr "BenutzergefĂŒhrte Wiederherstellung"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Mount point: "
-msgstr "EinhÀngpunkt: "
+msgid ""
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
+msgstr ""
+"„%s“: Falls eine Soundkarte in Ihrem Rechner gefunden wurde, wird sie hier\n"
+"angezeigt. Sollte die von DrakX getroffene Auswahl nicht korrekt sein,\n"
+"betÀtigen Sie einfach die SchaltflÀche, um sie zu korrigieren."
-#: ../../diskdrake/dav.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Server: "
-msgstr "Server: "
+msgid "Script-based"
+msgstr "Skript-basiert"
-#: ../../diskdrake/dav.pm:1
+#: ../../install_any.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "Die URL muss mit „http://“ oder „https://“ beginnen!"
+msgid "Error reading file %s"
+msgstr "Fehler beim Lesen der Datei %s"
-#: ../../diskdrake/dav.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Bitte geben Sie die WebDAV-Server URL an"
+msgid "PLL setting:"
+msgstr "PLL-Einstellung:"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
#, c-format
-msgid "Mount point"
-msgstr "EinhÀngpunkt"
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "Sie mĂŒssen eine FAT Partition in „/boot/efi“ eingehĂ€ngt haben."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid " on "
+msgstr " auf "
#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Server"
-msgstr "Server"
+msgid "The URL must begin with http:// or https://"
+msgstr "Die URL muss mit „http://“ oder „https://“ beginnen!"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mount"
-msgstr "EinhÀngen"
+msgid ""
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
+msgstr ""
+"Sie können hier direkt die URI eines Druckers angeben. Die URI muss den CUPS "
+"bzw. den Foomatic Spezifikationen genĂŒgen. Es sei hier noch angemerkt, dass "
+"nicht alle URI-Typen von allen Drucksystemem unterstĂŒtzt werden."
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Unmount"
-msgstr "AushÀngen"
+msgid "Other OS (SunOS...)"
+msgstr "Anderes Betriebssystem (SunOS ...)"
-#: ../../diskdrake/dav.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "New"
-msgstr "Neu"
+msgid "Install/Upgrade"
+msgstr "Installation/Aktualisierung"
-#: ../../diskdrake/dav.pm:1
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "%d packages"
+msgstr "%d Pakete"
+
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
+"Backup and Restore application\n"
+"\n"
+"--default : save default directories.\n"
+"--debug : show all debug messages.\n"
+"--show-conf : list of files or directories to backup.\n"
+"--config-info : explain configuration file options (for non-X "
+"users).\n"
+"--daemon : use daemon configuration. \n"
+"--help : show this message.\n"
+"--version : show version number.\n"
msgstr ""
-"WebDAV ist ein Protokoll, dass es Ihnen erlaubt, Webserver-Verzeichnisse\n"
-"einzuhÀngen, sodass Sie diese wie bei lokalen Dateisystemen verwenden\n"
-"können (sofern der Webserver als WebDAV-Server eingerichtet wurde). \n"
-"Falls Sie EinhĂ€ngpunkte fĂŒr WebDAV hinzufĂŒgen wollen, wĂ€hlen Sie\n"
-"„Neu“."
+"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
+"Archivierungs- und Restaurierungs-Programm\n"
+"\n"
+"--default - Speichern der Standardverzeichnisse.\n"
+"--debug - Ausgabe aller Debug-Informationen.\n"
+"--show-conf - Liste der zu archivierenden Dateien/Verzeichnisse.\n"
+"--config-info - ErklĂ€rung der Konfigurationsdatei-Parameter (fĂŒr nicht-X "
+"Anwender).\n"
+"--daemon - Verwende die Dienst-Konfiguration. \n"
+"--help - Asgabe dieses Hilfetextes.\n"
+"--version - Ausgabe der Versionsnummer.\n"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Verwenden Sie stattdessen „%s“"
+msgid "Domain Authentication Required"
+msgstr "DomÀnen-Authentifizierung nötig"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Type"
-msgstr "Typ"
+msgid ""
+"\n"
+"\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Verwenden Sie erst „umount“"
+msgid "Costa Rica"
+msgstr "Costa Rica"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Delete"
-msgstr "Löschen"
+msgid "Use libsafe for servers"
+msgstr "„libsafe“ bei Servern verwenden"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Create"
-msgstr "Erzeugen"
+msgid "Icelandic"
+msgstr "Island"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Filesystem types:"
-msgstr "Dateisystemtypen:"
+msgid ""
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
+"\n"
+"Verwendung: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Empty"
-msgstr "Leer"
+msgid "Please relog into %s to activate the changes"
+msgstr ""
+"Bitte loggen Sie sich erneut in %s ein, \n"
+"um die Änderungen wirksam werden zu lassen."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../my_gtk.pm:1
#, c-format
-msgid "Windows"
-msgstr "Windows"
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "Lilo/grub mode"
+msgstr "LILO/GRUB Modus"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "Output"
+msgstr "Ausgabe"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../loopback.pm:1
#, c-format
-msgid "Swap"
-msgstr "Auslagerung"
+msgid "Circular mounts %s\n"
+msgstr "Schleife bei den EinhÀngpunkten %s\n"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Journalised FS"
-msgstr "Journalisierendes FS"
+msgid "Martinique"
+msgstr "Martinique"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Ext2"
-msgstr "Ext2"
+msgid "HardDrive / NFS"
+msgstr "Festplatte/NFS"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "No hard drives found"
-msgstr "Keine Festplatten gefunden"
+msgid "a number"
+msgstr "eine Nummer"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please click on a partition"
-msgstr "Bitte klicken Sie auf eine Partition"
+msgid "Swedish"
+msgstr "Schweden"
-#: ../../diskdrake/hd_gtk.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "Which %s driver should I try?"
+msgstr "Welchen %s-Treiber soll ich versuchen?"
+
+#: ../../standalone/logdrake:1
#, c-format
msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+"You will receive an alert if one of the selected services is no longer "
+"running"
msgstr ""
-"Sie haben nur eine große FAT Partition \n"
-"(diese enthÀlt hÀufig nur Microsoft DOS/Windows).\n"
-"Ich rate Ihnen, diese Partition erst zu verkleinern\n"
-"(WĂ€hlen Sie sie an und drĂŒcken Sie dann „GrĂ¶ĂŸe verĂ€ndern“)"
+"Sie werden benachrichtigt, falls einer der gewÀhlten Dienste nicht mehr lÀuft"
#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Choose action"
-msgstr "WĂ€hlen Sie ein Aktion aus"
+msgid "Filesystem types:"
+msgstr "Dateisystemtypen:"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Wizard"
-msgstr "Assistent"
+msgid ", multi-function device on HP JetDirect"
+msgstr ", MultifunktionsgerÀt am HP JedDirect"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Wenn Sie aboot verwenden wollen, mĂŒssen Sie ausreichend Platz am Anfang \n"
-"der Platte lassen (2048 Sektoren reichen aus)."
+msgid "Northern Mariana Islands"
+msgstr "Nördliche Mariannen-Inseln"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Bitte machen Sie erst eine Sicherheitskopie Ihrer Daten!"
+msgid "none"
+msgstr "keine"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Read carefully!"
-msgstr "Lesen Sie bitte aufmerksam!"
+msgid "user :"
+msgstr "Benutzer :"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Encryption key (again)"
-msgstr "SchlĂŒssel (erneut)"
+msgid "Please enter your password"
+msgstr "Bitte geben Sie Ihr Passwort ein"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Encryption key"
-msgstr "SchlĂŒssel"
+msgid ""
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
+msgstr "Name des neuen Profils (es wird als Kopie des aktuellen erstellt):"
-#: ../../diskdrake/interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "The encryption keys do not match"
-msgstr "Die Passwörter stimmen nicht ĂŒberein"
+msgid "Floppy"
+msgstr "Diskettenlaufwerke"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Dieses Passwort ist zu einfach (es muss mindestens %d Zeichen lang sein)!"
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "Geben Sie an, ob sie Ihr RW-Medium löschen wollen (erste Sitzung)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "WĂ€hlen Sie Ihren Dateisystem-SchlĂŒssel (Passwort)"
+msgid "Ghostscript referencing"
+msgstr "Ghostscriptreferenz"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Filesystem encryption key"
-msgstr "Dateisystem-SchlĂŒssel"
+msgid "Bootloader"
+msgstr "Betriebssystemstarter"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Type: "
-msgstr "Typ:"
+msgid "Move"
+msgstr "Bewegen"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "on channel %d id %d\n"
-msgstr "auf Kanal %d ID %d\n"
+msgid "Bootloader to use"
+msgstr "Zu verwendender Betriebssystemstarter"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partitionstabellen Typ: %s\n"
+msgid "SMB server host"
+msgstr "SMB-Server"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM Platten %s\n"
+msgid "Name Servers:"
+msgstr "DNS-Server:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "Info: "
-msgstr "Info: "
+msgid ""
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
+msgstr ""
+"\n"
+"Achtung\n"
+"\n"
+"Bitte lesen Sie die nachfolgenden AusfĂŒhrungen sorgfĂ€ltig. Wenn Sie mit\n"
+"irgendeinem Teil nicht einverstanden sind, dĂŒrfen Sie nicht den Inhalt\n"
+"der folgenden CDs installieren. Klicken Sie auf „ZurĂŒckweisen“, um die\n"
+"Installation ohne Verwendung dieser CDs fortzusetzen.\n"
+"\n"
+"\n"
+"Einige Komponenten auf den nachfolgenden CDs unterliegen nicht der GPL\n"
+"oder Àhnlichen Lizenzabkommen. Jede dieser Komponenten unterliegt dann\n"
+"den Bedingungen ihrer eigenen spezifischen Lizenz.\n"
+"Bitte lesen Sie diese Lizenzen sorgfÀltig und nur wenn Sie mit ihnen\n"
+"einverstanden sind, dĂŒrfen Sie die entsprechenden Produkte entsprechend\n"
+"ihrer Lizenz benutzen und weitergeben.\n"
+"Solche Lizenzen verbieten im allgemeinen das Transferieren, Duplizieren\n"
+"(außer fĂŒr Sicherheitskopien), Weitergeben, Decompilieren, Disassamblen\n"
+"oder VerÀndern der Komponente.\n"
+"Jeder Bruch des Lizenzabkommens beendet sofort die Ihnen im Rahmen der\n"
+"Lizenz eingerÀumten Rechte. Wenn die jeweilige Lizenz Ihnen nicht\n"
+"entsprechende Rechte einrĂ€umt, dĂŒrfen Sie die Programme nicht auf mehr\n"
+"als einem System installieren oder zur Benutzung in einem Netzwerk\n"
+"einrichten. Im Zweifelsfall kontaktieren Sie bitte den Vertreiber oder\n"
+"Herausgeber der jeweiligen Komponente.\n"
+"Transfer an Dritte oder Kopieren solcher Komponenten inklusive ihrer\n"
+"Dokumentation ist normalerweise verboten.\n"
+"\n"
+"\n"
+"Alle Rechte an den Komponenten der nachfolgenden CDs liegen bei den\n"
+"jeweiligen Autoren und sind durch die Urheberrechtsgesetze fĂŒr\n"
+"Softwareprodukte geschĂŒtzt.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrie: %s Zylinder, %s Köpfe, %s Sektoren\n"
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Diesen Drucker fĂŒr StarOffice/OpenOffice.org/GIMP entfernen"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Size: %s\n"
-msgstr "GrĂ¶ĂŸe: %s\n"
+msgid ""
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
+msgstr ""
+"Der Linux Virtual Server kann verwendet werden, um um ein \n"
+"hochperformanten HochverfĂŒgbarkeitsserver aufzusetzen."
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Read-only"
-msgstr "Nur lesbar"
+msgid "4 billion colors (32 bits)"
+msgstr "4 Milliarden Farben (32 Bit)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Device: "
-msgstr "GerÀt: "
+msgid "Micronesia"
+msgstr "Mikronesien"
-#: ../../diskdrake/interactive.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
+msgid "License"
+msgstr "Lizenz"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "This may take a moment to generate the keys."
msgstr ""
-"\n"
-"Diese spezielle Start-Partition\n"
-"ist fĂŒr die Verwendung mehrerer\n"
-"Betriebssysteme auf dem selben\n"
-"Rechner.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgstr "Autoerkennung von Druckern (Lokal, TCP/Socket und SMB Drucker)"
+
+#: ../../network/adsl.pm:1
+#, c-format
+msgid "Sagem (using pppoa) usb"
msgstr ""
-"\n"
-"Es handelt sich mit großer\n"
-"Wahrscheinlichkeit um eine\n"
-"Treiber-Partition. Sie sollten\n"
-"sie daher besser unverÀndert\n"
-"lassen.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Loopback file name: %s"
-msgstr "Dateiname des Loopbacks: %s"
+msgid ""
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
+msgstr ""
+"Ein Fehler ist aufgetreten - es wurden keine gĂŒltigen GerĂ€te gefunden, auf "
+"denen neue Dateisysteme erstellt werden können. Bitte ĂŒberprĂŒfen Sie Ihre "
+"Hardware(-Konfiguration) auf mögliche Fehler und falsche Einstellungen."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID Platten %s\n"
+msgid "Starting the printing system at boot time"
+msgstr "Drucksystem beim BS-Start aktivieren"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Chunk size %s\n"
-msgstr "BlockgrĂ¶ĂŸe %s\n"
+msgid "Do you want to start the connection at boot?"
+msgstr "Möchten Sie die Verbindung bei Betriebssystemstart herstellen?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Level %s\n"
-msgstr "Level %s\n"
+msgid "Processor ID"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
+msgid "Sound trouble shooting"
msgstr ""
-"Partition wird standardmĂ€ĂŸig geladen\n"
-" (fĂŒr MS-DOS Boot, nicht jedoch fĂŒr LILO)\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Polish (qwerty layout)"
+msgstr "Polen (QWERTY Layout)"
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "activate now"
+msgstr "Jetzt aktivieren"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Loopback file(s):\n"
-" %s\n"
+"\n"
+"Drakbackup activities via CD:\n"
+"\n"
msgstr ""
-"Loopback Datei(en):\n"
-" %s\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+msgid ""
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
+msgstr ""
+"Sie sind dabei das Drucksystem %s auf einem Rechner mit Sicherheitsebene %s "
+"zu installieren.\n"
+"\n"
+"Dieses Drucksystem lÀuft als DÀmon (Hintergrundprozess), der auf "
+"DruckauftrĂ€ge wartet, um sie abzuarbeiten. Da der DĂ€mon auch fĂŒr andere "
+"Rechner Ihres Netzwerks erreichbar ist,schaffen Sie damit einen möglichen "
+"Angriffspunkt. Aus SicherheitsgrĂŒnden werden in dieser Sicherheitsebene "
+"standardmĂ€ĂŸig nur einige ausgewĂ€hlte DĂ€mons gestartet.\n"
+"\n"
+"Wollen Sie wirklich dieses Drucksystem auf diesem Rechner installieren?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mounted\n"
-msgstr "EingehÀngt\n"
+msgid "Host \"%s\", port %s"
+msgstr "Rechner „%s“, Port %s"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Not formatted\n"
-msgstr "Nicht formatiert\n"
+msgid "This partition can't be used for loopback"
+msgstr "Diese Partition kann nicht als Loopback verwendet werden"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Formatted\n"
-msgstr "Formatiert\n"
+msgid "File already exists. Use it?"
+msgstr ""
+"Es existiert bereits eine Datei mit diesem Namen. Soll ich sie verwenden?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Zylinder %d bis %d\n"
+msgid "received: "
+msgstr "Enpfangen: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ", %s sectors"
-msgstr ", %s Sektoren"
+msgid "Right Alt key"
+msgstr "AltGr-Taste"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Size: %s"
-msgstr "GrĂ¶ĂŸe: %s"
+msgid "the list of alternative drivers for this sound card"
+msgstr "Liste alternativer Soundtreiber fĂŒr diese Soundkarte."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Start: sector %s\n"
-msgstr "Anfang: Sektor %s\n"
+msgid "Gateway"
+msgstr "Gateway"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Name: "
-msgstr "Name: "
+msgid "Scanner sharing"
+msgstr "Gemeinsamer Scannerzugriff"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS Laufwerksbuchstabe: %s (vermutlich?)\n"
+msgid "Tonga"
+msgstr "Tonga"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "partition %s is now known as %s"
-msgstr "Die Partition %s heißt nun %s"
+msgid "Tunisia"
+msgstr "Tunesien"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Removing %s"
-msgstr "Entferne: %s"
+msgid "Profile: "
+msgstr "Profil: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Copying %s"
-msgstr "Kopiere: %s"
+msgid ""
+"Click on a device in the left tree in order to display its information here."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Moving files to the new partition"
-msgstr "Dateien auf die neue Partition verschieben."
+msgid "XawTV isn't installed!"
+msgstr "XawTV ist nicht installiert!"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+"Create/Transfer\n"
+"backup keys for SSH"
msgstr ""
-"Das Verzeichnis „%s“ enthĂ€lt bereits Daten\n"
-"(%s)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hide files"
-msgstr "Dateien verstecken"
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr "Keine kritischen Dateien (passwd, group, fstab)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Move files to the new partition"
-msgstr "Dateien auf die neue Partition verschieben."
+msgid "old static device name used in dev package"
+msgstr "Alter statischer Name im „dev“ Paket"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
+msgid "This label is already used"
+msgstr "Dieser Eintrag existiert bereits"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
-"Nach Formatieren der Partition %s, werden sÀmtliche Daten darauf gelöscht"
+"\n"
+"Willkommen zum Druckerassistenten\n"
+"\n"
+"Dieser Assistent möchte Ihnen helfen, Ihre(n) lokalen und Netzwerkdrucker zu "
+"konfigurieren.\n"
+"\n"
+"Falls Sie Drucker haben, die direkt mit dem Rechner verbunden sind, stellen "
+"Sie sicher, dass diese richtig angeschlossen und eingeschaltet sind. Ebenso "
+"mĂŒssen die Netzwerkdrucker eingeschaltet und mit dem Netz verbunden sein.\n"
+"\n"
+"Es sei angemerkt, dass sie Erkennung von Netzwerkdruckern etwas lÀnger "
+"dauert, als das Finden von Druckern, die direkt an Ihrem Rechner hÀngen. Sie "
+"sollten daher diesen Punkt ausschalten, sofern Sie nur direkt am Rechner "
+"hÀngende Drucker verwenden wollen.\n"
+"\n"
+"BetĂ€tigen Sie die SchaltflĂ€che „Weiter“, wenn Sie soweit sind, bzw. "
+"„Abbruch“, wenn Sie keine Drucker konfigurieren wollen."
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You'll need to reboot before the modification can take place"
+msgid "After formatting partition %s, all data on this partition will be lost"
msgstr ""
-"Sie mĂŒssen Ihren Rechner neu starten, damit die VerĂ€nderungen wirksam werden"
+"Nach Formatieren der Partition %s, werden sÀmtliche Daten darauf gelöscht"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Die Partitionstabelle der Platte „%s“ wird gespeichert!"
+msgid "Connection Time: "
+msgstr "Verbindungszeit: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "Das Paket %s wird benötigt. Soll ich es installieren?"
+msgid "select perm file to see/edit"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "What type of partitioning?"
-msgstr "Welcher Partitionstyp?"
+msgid ""
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
+msgstr ""
+"Bitte legen Sie die Installations-CD-ROM in Ihr Laufwerk und drĂŒcken \n"
+"Sie dann „OK“. Falls Sie sie nicht vorliegen haben, drĂŒcken Sie \n"
+"„Abbruch“."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Vorsicht: Diese Aktion ist gefÀhrlich."
+msgid "Use group id for execution"
+msgstr "Gruppen-ID zur AusfĂŒhrung benutzen"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "chunk size"
-msgstr "BlockgrĂ¶ĂŸe"
+msgid "Choose the default user:"
+msgstr "WĂ€hlen Sie den Standard-Nutzer:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "level"
-msgstr "Level"
+msgid "Gabon"
+msgstr "Gabun"
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "device"
-msgstr "GerÀt"
+msgid ""
+"\n"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
+msgstr ""
+"\n"
+"Drucker an entfernten CUPS-Servern mĂŒssen hier nicht konfiguriert werden; "
+"diese Drucker werden automatisch erkannt."
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Various"
-msgstr "Verschiedene"
+msgid ""
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
+msgstr ""
+"Sie können andere Sprachen auswÀhlen, die nach der Installation zur "
+"VerfĂŒgung stehen."
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Mount options"
-msgstr "EinhÀng-Optionen"
+msgid "Domain"
+msgstr "DomÀne"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "File already exists. Use it?"
-msgstr ""
-"Es existiert bereits eine Datei mit diesem Namen. Soll ich sie verwenden?"
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "Geben Sie, falls nötig, die genaue RAM GrĂ¶ĂŸe an (%d MB gefunden)"
-#: ../../diskdrake/interactive.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "File is already used by another loopback, choose another one"
+msgid ""
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
+"\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
+"\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
msgstr ""
-"Diese Datei wird bereits von einer anderen Loopback-VerknĂŒpfung verwendet, "
-"wÀhlen Sie eine andere Datei."
+"LILO und grub sind Betriebssystemstarter fĂŒr GNU/Linux. Diese\n"
+"Installationsphase lÀuft in den meisten FÀllen völlig automatisch ab. DrakX\n"
+"analysiert den Bootsektor und ergreift dann die passenden Maßnahmen:\n"
+"\n"
+" * Findet DrakX einen Windows-Bootsektor, ersetzt es ihn durch einen grub-\n"
+"oder LILO-Bootsektor. Sie erhalten dadurch die Möglichkeit, beim\n"
+"Systemstart zwischen Windows (bzw. anderen Betriebssystemen, sofern\n"
+"vorhanden) und GNU/Linux auszuwÀhlen;\n"
+"\n"
+" * Findet DrakX einen Linux-Bootsektor vor, ersetzt es ihn durch einen\n"
+"neuen;\n"
+"\n"
+"Falls DrakX nicht weiß, wo der Betriebssystemstarter installiert werden\n"
+"soll, wird es Sie um Ihre Meinung bitten."
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Give a file name"
-msgstr "Dateinamen angeben"
+msgid "Provider dns 2 (optional)"
+msgstr "Zweiter DNS des Providers (optional)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Filesystem type: "
-msgstr "Dateisystemtyp: "
+msgid "Boot device"
+msgstr "Boot GerÀt"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Size in MB: "
-msgstr "GrĂ¶ĂŸe in MB:"
+msgid "Which partition do you want to resize?"
+msgstr "Bei welcher Partition wollen Sie die GrĂ¶ĂŸe Ă€ndern?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Loopback file name: "
-msgstr "Name der Loopback-Datei: "
+msgid "United States Minor Outlying Islands"
+msgstr "United States Minor Outlying Islands"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Loopback"
-msgstr "Loopback"
+msgid "A tool to monitor your logs"
+msgstr "Ihre LogbĂŒcher betrachen"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "Diese Partition kann nicht als Loopback verwendet werden"
+msgid "Djibouti"
+msgstr "Djibouti"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "LVM name?"
-msgstr "LVM Name?"
+msgid "detected on port %s"
+msgstr "an Prot %s gefunden"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "new"
-msgstr "Neu"
+msgid "LPD"
+msgstr "LPD"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "WĂ€hlen Sie einen vorhandenen LVM"
+msgid "Graphics card: %s\n"
+msgstr "Grafikkarte: %s\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "WĂ€hlen Sie einen vorhandenen RAID"
+msgid "Yaboot"
+msgstr "Yaboot"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Moving partition..."
-msgstr "Bewege Partition..."
+msgid "Please check if you are using a DVDRAM device"
+msgstr "Geben Sie an, ob sie ein DVDRAM-GerÀt verwenden"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Moving"
-msgstr "wechsele"
+msgid "Splash selection"
+msgstr "Startschirmauswahl"
-#: ../../diskdrake/interactive.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "Zu welchem Sektor wollen Sie wechseln?"
+msgid "Extended partition not supported on this platform"
+msgstr "Diese Rechnerarchitektur kennt keine erweiterten Partitionen"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Sector"
-msgstr "Sektor"
+msgid "ISDN Configuration"
+msgstr "ISDN Konfiguration"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "Zu welcher Platte wollen Sie wechseln?"
+msgid "high"
+msgstr "Hoch"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Move"
-msgstr "Bewegen"
+msgid "Internet Connection Sharing"
+msgstr "Teilen der Internet-Verbindung"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "New size in MB: "
-msgstr "Neue GrĂ¶ĂŸe in MB:"
+msgid "Choose file"
+msgstr "Dateien wÀhlen"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Choose the new size"
-msgstr "WĂ€hlen Sie die neue GrĂ¶ĂŸe"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
+msgstr ""
+"WARNUNG: Ich habe eine eine Firewall-Konfiguration gefunden. \n"
+"Möglicherweise mĂŒssen Sie nach der Installation einige Einstellungen \n"
+"von Hand vornehmen."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Resize"
-msgstr "GrĂ¶ĂŸe verĂ€ndern"
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "Drucken/Fotokartenzugriff mit „%s“"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
+msgid ""
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
msgstr ""
-"Durch VerĂ€nderung der PartitionsgrĂ¶ĂŸe von %s, gehen sĂ€mtliche Daten darauf "
-"verloren"
+"Wollen Sie oben aufgefĂŒhrte Drucker oder Drucker im lokalen Netzwerk zum "
+"Drucken konfigurieren?\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer default settings"
+msgstr "Auswahl des Druckertyps"
+
+#: ../../mouse.pm:1
#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Sie sollten ein Backup sÀmtlicher Daten dieser Partition erstellen"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Generische PS2 Rad-Maus"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This partition is not resizeable"
-msgstr "Die GrĂ¶ĂŸe dieser Partition kann ich nicht Ă€ndern"
+msgid "Removing old printer \"%s\"..."
+msgstr "Alten Drucker „%s“ entfernen ..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Errechne die Grenzen des FAT Dateisystems"
+msgid "Select a device !"
+msgstr "WÀhlen Sie ein GerÀt!"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "Wo wollen Sie „%s“ einhĂ€ngen?"
+msgid "Remove selected server"
+msgstr "Löschen des markierten Servers"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Ich kann diesen EinhĂ€ngpunkt nicht zurĂŒcksetzen, da diese Partition als \n"
-"Loopback verwendet wird. Bitte entfernen Sie erst diesen Loopback."
+msgid "French Southern Territories"
+msgstr "French Southern Territories"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Wo wollen Sie das GerÀt %s einhÀngen?"
+msgid "the vendor name of the processor"
+msgstr "Herstellername des Prozessors"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "Wo wollen Sie die Loopback-Datei %s einhÀngen?"
+msgid "All data on this partition should be backed-up"
+msgstr "Sie sollten ein Backup sÀmtlicher Daten dieser Partition erstellen"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "Konvertiere ext2 zu ext3"
+msgid "Installing package %s"
+msgstr "Installation des Pakets %s"
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Which filesystem do you want?"
-msgstr "Welches Dateisystem wollen Sie verwenden?"
+msgid "Checking device and configuring HPOJ..."
+msgstr ""
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Change partition type"
-msgstr "Partitionstyp Àndern"
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
+msgstr ""
+"Um mehr Partitionen einrichten zu können, mĂŒssen Sie zunĂ€chst eine Partition "
+"löschen und anschließend eine erweiterte Partition erzeugen"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
msgstr ""
-"Nach Änderung des Partitionstyps von %s, werden sĂ€mtliche Daten darauf "
-"gelöscht"
+"Ihr Drucker wurde automatisch so konfiguriert, dass Sie von Ihrem Rechner "
+"auf die Foto-Speicherkartenlaufwerke zugreifen können. Sie können jetzt "
+"entweder mit dem grafischen Programm MToolsFM (Menu: \"Programme\" -> "
+"\"Dateiwerkzeuge\" -> \"MTools File Manager\") oder auf der Kommandozeile "
+"mit den mtools (FĂŒr mehr Information geben Sie \"man mtools\" auf der "
+"Kommandozeile ein) auf die eingelegte Karte zugreifen. Sie finden das "
+"Dateisystem der Karte unter dem Laufwerksbuchstaben \"p:\" oder, wenn Sie "
+"mehr als einen HP-Drucker mit Foto-Speicherkartenlaufwerken haben, unter den "
+"nachfolgenden Buchstaben. In MToolsFM können Sie zwischen den "
+"Laufwerksbuchstaben mit dem Feld ĂŒber der oberen rechten Ecke der Dateiliste "
+"umschalten."
-#: ../../diskdrake/interactive.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Remove the loopback file?"
-msgstr "Die Loopback-Datei entfernen?"
+msgid "Choose packages to install"
+msgstr "Zu installierende Pakete"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
msgstr ""
-"Sie können keine weiteren Partitionen anlegen (da Sie die maximale \n"
-"Anzahl primÀrer Partitionen erstellt haben). Bitte löschen Sie \n"
-"eine primÀre Partioion und legen Sie stattdessen eine erweiterte \n"
-"Partition an."
+"\n"
+" Einige der Sendmail-Fehler beruhen auf einer\n"
+" fehlerhaften PostFix Konfiguration. Um sie zu\n"
+" beheben mĂŒssen Sie „myhostname“ oder „mydomain“\n"
+" in „/etc/postfix/main.cf“ korrigieren.\n"
+"\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Preference: "
-msgstr "Einstellung: "
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr ""
+"SÄMTLICHE existierende Partitionen samt der derauf befindlichen Daten \n"
+"auf Laufwerk %s gehen dabei verloren"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Start sector: "
-msgstr "Anfangssektor: "
+msgid ""
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
+msgstr ""
+"Es steht auf Ihrem System nicht genĂŒgend Speicherplatz fĂŒr die \n"
+"Installation bzw. Aktualisierung zur VerfĂŒgung (%d > %d)."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create a new partition"
-msgstr "Erzeuge eine neue Partition"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
+msgstr ""
+"Jeder Drucker benötigt einen Namen (etwa „Drucker“).\n"
+"Beschreibung und Standort mĂŒssen nicht ausgefĂŒllt werden.\n"
+"Sie dienen nur als Kommentare fĂŒr den Anwender."
-#: ../../diskdrake/interactive.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Use for loopback"
-msgstr "Als Loopback verwenden"
+msgid ""
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
+msgstr ""
+"„%s“: Durch Anwahl der SchaltflĂ€che „%s“ startet den Druckerassistenten.\n"
+"Weitere Informationen zu diesem Assistenten erhalten Sie im Drucker-Kapitel\n"
+"des „Starter Handbuch“. Das dort vorgestellte Programm entspricht dem\n"
+"wÀhrend der Installation angebotenen."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Modify RAID"
-msgstr "RAID modifizieren"
+msgid "Bhutan"
+msgstr "Butan"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Remove from LVM"
-msgstr "Löschen aus dem LVM"
+msgid "Network interface"
+msgstr "Netzwerkkarte"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove from RAID"
-msgstr "Löschen aus dem RAID"
+msgid "Reading printer data..."
+msgstr "Lesen der Treiber-Datenbank ..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Add to LVM"
-msgstr "Zum LVM hinzufĂŒgen"
+msgid "Korean keyboard"
+msgstr "Korea"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Add to RAID"
-msgstr "Zum RAID hinzufĂŒgen"
+msgid "Not connected"
+msgstr "Nicht Verbunden"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Format"
-msgstr "Formatieren"
+msgid "Greek"
+msgstr "Griechenland"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Detailed information"
-msgstr "AusfĂŒhrliche Informationen"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Trying to rescue partition table"
-msgstr "Ich Versuche, die Partitionstabelle zu retten"
+msgid "Saint Kitts and Nevis"
+msgstr "St. Kitts und Nevis"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
msgstr ""
-"Legen Sie eine Diskette in das Laufwerk\n"
-"Alle Daten auf dieser Diskette werden gelöscht!"
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Warning"
-msgstr "Warnung"
+msgid "Enable OF Boot?"
+msgstr "Open Firmware Start erlauben"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Select file"
-msgstr "Datei auswÀhlen"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr ""
+"Sie können JFS nicht fĂŒr Partitionen verwenden, die kleiner als 16MB sind!"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Monitor VertRefresh: %s\n"
+msgstr "Monitor Vert. Frequenz: %s\n"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "path"
+msgstr ""
+
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Mount point"
+msgstr "EinhÀngpunkt"
+
+#: ../../Xconfig/test.pm:1
#, c-format
msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
msgstr ""
-"Die gesicherte Partitionstabelle hat nicht dieselbe GrĂ¶ĂŸe\n"
-"Soll trotzdem fortgefahren werden?"
+"Es trat ein Fehler auf:\n"
+"%s\n"
+"Versuchen Sie, einen Parameter zu Àndern."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Removable media automounting"
-msgstr "Wechselmedien automatisch EinhÀngen"
+msgid "Restore system"
+msgstr "System wiederherstellen"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid ""
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
+msgstr ""
+"Das sind die Rechner und Netzwerke, fĂŒr die die lokalen Drucker zugĂ€nglich "
+"sein sollen:"
+
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Reload partition table"
-msgstr "Partitionstabelle neu laden"
+msgid "The DHCP end ip"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Rescue partition table"
-msgstr "Partitionstabelle retten"
+msgid "Another one"
+msgstr "Anderer"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore partition table"
-msgstr "Partitionstabelle wiederherstellen"
+msgid "Drakbackup"
+msgstr "DrakBackup"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Save partition table"
-msgstr "Partitionstabelle schreiben"
+msgid "Colombia"
+msgstr "Kolumbien"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
+"Current configuration of `%s':\n"
+"\n"
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
msgstr ""
-"Um mehr Partitionen einrichten zu können, mĂŒssen Sie zunĂ€chst eine Partition "
-"löschen und anschließend eine erweiterte Partition erzeugen"
+"Aktuelle Konfiguration von „%s“:\n"
+"\n"
+"Netzwerk: %s\n"
+"IP-Adresse: %s\n"
+"IP-Eigenschaften: %s\n"
+"Treiber: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "I can't add any more partition"
-msgstr "Ich kann keinen weiteren Partitionen hinzufĂŒgen"
+msgid "Plug'n Play"
+msgstr "Plug'n'Play"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "All primary partitions are used"
-msgstr "Alle PrimÀrpartitionen sind in Gebrauch"
+msgid "Reunion"
+msgstr "RĂ©union"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Hard drive information"
-msgstr "Festplatten-Informationen"
+msgid "Details"
+msgstr "Details"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Auto allocate"
-msgstr "Automatisches Erstellen"
+msgid "For security reasons, it will be disconnected now."
+msgstr "Aus SicherheitsgrĂŒnden wird die Verbindung nun unterbrochen."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Clear all"
-msgstr "Alles löschen"
+msgid "Synchronization tool"
+msgstr "Synchronisationsprogramm"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Möchten Sie die vorgenommenen Änderungen in „/etc/fstab“ speichern?"
+msgid "Checking your system..."
+msgstr "Untersuchung Ihres Rechners ..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Beenden ohne die Partitionstabelle zu speichern?"
+msgid "Print"
+msgstr "Drucken"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Quit without saving"
-msgstr "Beenden ohne speichern"
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Continue anyway?"
-msgstr "Wollen Sie trotzdem fortfahren?"
+msgid "Mongolia"
+msgstr "Mongolei"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Toggle to expert mode"
-msgstr "In den Experten-Modus wechseln"
+msgid "Mounted\n"
+msgstr "EingehÀngt\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Graphical Interface"
+msgstr "Grafikumgebung"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Toggle to normal mode"
-msgstr "In den Normal-Modus wechseln"
+msgid "Restore Users"
+msgstr "Benutzerkennzeichen wiederherstellen"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Encryption key for %s"
+msgstr "SchlĂŒssel"
+
+#: ../../services.pm:1
#, c-format
-msgid "Undo"
-msgstr "RĂŒckgĂ€ngig"
+msgid ""
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
+msgstr ""
+"Mittels portmapper werden RPC-Verbindungen verwaltet, die etwa von \n"
+"den Protokollen NFS und NIS verwendet werden. Auf Rechnern, die \n"
+"solche Server (RPC-basierte) beherbergen, muss dieser Dienst \n"
+"aktiviert sein."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Exit"
-msgstr "Verlassen"
+msgid "Detected hardware"
+msgstr "Gefundene Hardware"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose a partition"
-msgstr "WĂ€hlen Sie eine Partition"
+msgid "Mauritius"
+msgstr "Mauritius"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Choose another partition"
-msgstr "WĂ€hlen Sie eine andere Partition"
+msgid "Myanmar (Burmese)"
+msgstr "Myanmar (Burmesien)"
-#: ../../diskdrake/removable.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Change type"
-msgstr "Typ Àndern"
+msgid "Enabling swap partition %s"
+msgstr "Swap Partition „%s“ aktivieren"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Search servers"
-msgstr "Server suchen"
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgstr ""
+"Sie haben keine FAT Partition, die ich als Loopback verwenden kann\n"
+"(möglicherweise haben Sie auch einfach nur nichtmehr genĂŒgend\n"
+"freien Speicher)."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Domain"
-msgstr "DomÀne"
+msgid "Armenian (old)"
+msgstr "Armenien (alt)"
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Username"
-msgstr "Benutzerkennzeichen"
+msgid ""
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
+msgstr ""
+"Es existiert bereits ein Drucker mit Namen „%s“ unter %s.\n"
+"Durch betĂ€tigen der SchaltfĂ€che „Übertragen“ können Sie ihn\n"
+"ĂŒberschreiben. Sie können dem Drucker auch einen neuen \n"
+"Namen geben oder ihn einfach ĂŒberspringen."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
msgid ""
-"Please enter your username, password and domain name to access this host."
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
msgstr ""
-"Bitte geben Sie Benutzerkennzeichen, Passwort und DomÀne des Rechners an."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Domain Authentication Required"
-msgstr "DomÀnen-Authentifizierung nötig"
+msgid ", host \"%s\", port %s"
+msgstr ", Rechner „%s“, Port %s"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Another one"
-msgstr "Anderer"
+msgid "Monaco"
+msgstr "Monaco"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Which username"
-msgstr "Benutzerkennzeichen"
+msgid "%s formatting of %s failed"
+msgstr "%s formatieren von %s schlug Fehl"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Can't login using username %s (bad password?)"
-msgstr "Ich kann mich unter „%s“ nicht anmelden! Stimmt das Passwort?"
+msgid "Partitioning failed: %s"
+msgstr "Das Partitionieren schlug Fehl: %s"
-#: ../../harddrake/data.pm:1
+# ../../standalone/drakxtv_.c:37ç
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "cpu # "
-msgstr "CPU #"
+msgid "Canada (cable)"
+msgstr "Kanada (Kabel)"
-#: ../../harddrake/data.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "SMBus controllers"
-msgstr "SMBus-Controller"
+msgid "Upgrade"
+msgstr "Aktualisierung"
-#: ../../harddrake/data.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "USB controllers"
-msgstr "USB-Controller"
+msgid "Workstation"
+msgstr "Arbeitsplatzrechner"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "SCSI controllers"
-msgstr "SCSI-Controller"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"Installiere Paket %s\n"
+"%d%%"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Kyrgyzstan"
+msgstr "Kirgisistan"
+
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Firewire controllers"
-msgstr "USB-Controller"
+msgid "With basic documentation"
+msgstr "Mit minimaler Dokumentation (Empfohlen)"
-#: ../../harddrake/data.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "(E)IDE/ATA-Controller"
+msgid "Anacron is a periodic command scheduler."
+msgstr ""
+"Mit dem Dienst anacron können cron-Prozesse auch zu anderen als den \n"
+"vorgegebenen Zeiten gestartet werden. Dies ist vor Allem dann \n"
+"sinnvoll, wenn Ihr Rechner nicht rund um die Uhr lÀuft, da sonst \n"
+"Prozesse, die etwa zwischen Mitternacht und 6:00 Uhr gestartet \n"
+"werden sollten, nie ausgefĂŒhrt wĂŒrden."
-#: ../../harddrake/data.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Joystick"
-msgstr "Joystick"
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"Sie brauchen eine Verzeichnisbaumwurzel.\n"
+"Erzeugen Sie eine Partition (oder klicken Sie auf eine existierende).\n"
+"WĂ€hlen Sie „EinhĂ€ngpunkt“ und setzen Sie ihn auf „/“"
-#: ../../harddrake/data.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Scanner"
-msgstr "Scanner"
+msgid "Proxy should be http://..."
+msgstr "Proxy muss „http://...“ sein"
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Unknown/Others"
-msgstr "Unbekannt/Andere"
+msgid "South Africa"
+msgstr "SĂŒdafrika"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Bridges and system controllers"
-msgstr ""
+msgid "Western Sahara"
+msgstr "Westsahara"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Modem"
-msgstr "Modems"
+msgid "Etherboot Floppy/ISO"
+msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ethernetcard"
-msgstr "Netzwerkkarten"
+msgid "Modify printer configuration"
+msgstr "Drucker-Konfiguration Àndern"
-#: ../../harddrake/data.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Processors"
-msgstr "Prozessoren"
+msgid "Choose a partition"
+msgstr "WĂ€hlen Sie eine Partition"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Webcam"
-msgstr "Webcams"
+msgid "Edit current rule"
+msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Soundcard"
-msgstr "Soundkarten"
+msgid "%s"
+msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Other MultiMedia devices"
-msgstr "Andere Multimedia GerÀte"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
+msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Tvcard"
-msgstr "TV-Karten"
+msgid "Please test the mouse"
+msgstr "Bitte testen Sie Ihre Maus"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Videocard"
-msgstr "Videokarten"
+msgid "Other Media"
+msgstr "Anderes Medium"
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Tape"
-msgstr "Bandlaufwerke"
+msgid "Backup system files"
+msgstr "Systemdateien sichern"
-#: ../../harddrake/data.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
+msgid "Logitech MouseMan+"
+msgstr "Logitech MausMan/FirstMaus (Seriell)"
-#: ../../harddrake/data.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "CD/DVD burners"
-msgstr "CD/DVD-Brenner"
+msgid "Sector"
+msgstr "Sektor"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "CDROM"
-msgstr "CD-ROMs"
+msgid "Qatar"
+msgstr "Quatar"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Disk"
-msgstr "Festplatten"
+msgid "LDAP Base dn"
+msgstr "LDAP Base dn"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Zip"
-msgstr "ZIPs"
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr ""
+"Sie können dieses Paket nicht auswÀhlen, da Sie nicht genug Plattenplatz "
+"haben."
-#: ../../harddrake/data.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "generate auto-install floppy"
+msgstr "Erstellen einer Auto-Installationsdiskette"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Floppy"
-msgstr "Diskettenlaufwerke"
+msgid "Dialing mode"
+msgstr "Wahlmodus"
-#: ../../harddrake/sound.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Let me pick any driver"
-msgstr ""
+msgid "File sharing"
+msgstr "Gemeinsamer Dateizugriff"
-#: ../../harddrake/sound.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Driver:"
-msgstr "Treiber:"
+msgid "Clean /tmp at each boot"
+msgstr "Die Partition /tmp bei jedem Systemstart sÀubern"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
+msgid "Malawi"
+msgstr "Malawi"
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr ""
+msgid "Please choose your type of mouse."
+msgstr "Bitte wÀhlen Sie Ihren Maustyp."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
-msgstr ""
+msgid "class of hardware device"
+msgstr "Hardwareklasse"
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sound trouble shooting"
+msgid ""
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
msgstr ""
+"Das sind die Rechner und Netzwerke, fĂŒr die die lokalen Drucker zugĂ€nglich "
+"sein sollen:"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "Fehler: Es gibt keinen bekannten Treiber fĂŒr Ihre Soundkarte (%s)"
+msgid "United Kingdom"
+msgstr "Großbritannien"
-#: ../../harddrake/sound.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Unkown driver"
-msgstr "Unbekannter Treiber"
+msgid "running"
+msgstr "aktiv"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "Es gibt keinen bekannten Treiber fĂŒr Ihre Soundkarte (%s)"
+msgid "default"
+msgstr " Standard "
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No known driver"
-msgstr "Kein bekannter Treiber"
+msgid "Indonesia"
+msgstr "Indonesien"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-"Es existiert kein freier Treiber fĂŒr Ihre Soundkarte (%s), aber es gibt "
-"einen proprietÀren Treiber unter \"%s\"."
+msgid "France [SECAM]"
+msgstr "Frankreich (SECAM)"
-#: ../../harddrake/sound.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "No open source driver"
-msgstr "Kein OpenSource Treiber"
+msgid "restrict"
+msgstr "EinschrÀnken"
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Einen Moment ... ich richte die Konfiguration ein"
+msgid "must have"
+msgstr "unbedingt notwendig"
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
msgstr ""
+"CUPS unterstĂŒtzt keine Druker an Novel Servern oder Drucker, die ihre Daten "
+"in ein frei gewÀhltes Kommando senden.\n"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Trouble shooting"
-msgstr "Fehlerbehandlung"
+msgid "Senegal"
+msgstr "Senegal"
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
-msgstr ""
+msgid "Command line"
+msgstr "Kommandozeile"
-#: ../../harddrake/sound.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
msgstr ""
-"\n"
-"\n"
-"Ihre Karte verwendet momentan den %s „%s“ Treiber (Voreinstellung fĂŒr Ihre "
-"Karte ist „%s“)"
+"Unser komplettes Angebot an Linux-Lösungen, sowie Sonderangebote und "
+"Fanartikel sind in unseremm e-Store erhÀltlich:"
-#: ../../harddrake/sound.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "access to administrative files"
+msgstr "Zugriff auf Verwaltungsdateien"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
+"Error during sendmail.\n"
+" Your report mail was not sent.\n"
+" Please configure sendmail"
msgstr ""
-"Hier können Sie einen alternativen Treiber (entweder OSS odr ALSA) fĂŒr Ihre "
-"Soundkarte (%s) auswÀhlen"
+"Sendmail Fehler\n"
+" Ihre Bericht-Mail konnte nicht versandt werden.\n"
+" Bitte richten Sie Sendmail ein."
-#: ../../harddrake/sound.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Sound configuration"
-msgstr "Sound Konfiguration"
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ", MultifunktionsgerÀt am Parallelport \\#%s"
-#: ../../harddrake/sound.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
msgstr ""
-"Es existiert kein alternativer OSS/ALSA Treiber fĂŒr Ihre Soundkarte (%s), "
-"die momentan „%s“ verwendet."
+"Argumente: (val)\n"
+"\n"
+"Setzen des Shell-Timeouts. „0“ steht hier fĂŒr ohne Timeout."
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No alternative driver"
-msgstr "Kein alternativer Treiber"
+msgid "Montserrat"
+msgstr "Montserrat"
-#: ../../harddrake/v4l.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "enable radio support"
-msgstr "Radiobetrieb aktivieren"
+msgid "Automatic dependencies"
+msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Radio support:"
-msgstr "Radiobetrieb:"
+msgid "Swap"
+msgstr "Auslagerung"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "PLL setting:"
-msgstr "PLL-Einstellung:"
+msgid "Connecting to the Internet "
+msgstr "Mit dem Internet verbinden"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr "Anzahl der Puffer fĂŒr MMAP Aufnahmen"
+msgid "Restore Other"
+msgstr "Sonstiges wiederherstellen"
-#: ../../harddrake/v4l.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Number of capture buffers:"
-msgstr "Anzahl der Aufnahmepuffer:"
+msgid "TV card"
+msgstr "TV-Karte"
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Tuner type:"
-msgstr "Tunertyp:"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "Drucker an SMB/Windows 9x/ME/NT"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Card model:"
-msgstr "Kartentyp:"
+msgid ", "
+msgstr ", "
-#: ../../harddrake/v4l.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
msgstr ""
-"FĂŒr die meisten modernen TV-Karten erkennt das bttv-Modul des Linux Kerns "
-"automatisch die richtigen Parameter.\n"
-"Falls Ihre Karte falsch erkannt wird, können Sie Tuner- und Kartentyp hier "
-"eintellen. Geben Sie einfach die benötigten Parameter an."
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Unknown|Generic"
-msgstr "Unbekannt|Generisch"
+msgid "Remove selected host/network"
+msgstr "Löschen der markierte Rechner/Netzwerke"
-#: ../../harddrake/v4l.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "Unbekannt|CPH06X (bt878) [Zahlreiche Hersteller]"
+msgid ""
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
+msgstr ""
+"Postfix ist ein E-Mail Transport-Dienst. Mit seiner Hilfe werden \n"
+"E-Mails zwischen verschiedenen Rechnern weitergeleitet."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "Unbekannt|CPH05X (bt878) [Zahlreiche Hersteller]"
+msgid "Disconnection from the Internet failed."
+msgstr "Die Verbindungstrennung schlug fehl!"
-#: ../../harddrake/v4l.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Auto-detect"
-msgstr "Autoerkennung"
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
+msgstr ""
+"Hier können Sie die Taste, bzw Tastenkombination wÀhlen, \n"
+"mit der Sie zwischen verschiedenen Tastaturbelegugen \n"
+"umschalten können, etwa zwischen deutschem und US-Layout."
-#: ../../interactive/newt.pm:1
-#, c-format
-msgid "Do"
-msgstr "Los"
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Network Hotplugging"
+msgstr "Netzwerk hotplugfÀhig"
-#: ../../interactive/stdio.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Ihre Wahl? (Standard ‚%s‘) "
+msgid "if set to yes, reports check result to tty."
+msgstr ""
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Schlechte Wahl, bitte versuchen Sie es noch einmal\n"
+msgid "Restore From CD"
+msgstr "Von CD wiederherstellen"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Re-submit"
-msgstr "Erneut verschicken"
+msgid ""
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
+msgstr ""
+"Sie sind dabei, Ihren Rechner zu konfigurieren, dass er die eingerichtete \n"
+"Internetverbindung mit einem lokalem Netzwerk teilt.\n"
+"\n"
+"Stellen Sie sicher, dass Sie Ihre Netzwerk-/Internetverbindung\n"
+"mit DrakConnect eingerichtet haben, bevor Sie fortfahren.\n"
+"Anmerkung: Sie benötigen eine Netzwerkkarte, mit deren Hilfe Sie ein \n"
+"lokales Netz (LAN) aufsetzen können."
-#: ../../interactive/stdio.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
msgid ""
-"=> Notice, a label changed:\n"
-"%s"
+"Please choose which network adapter you want to use to connect to Internet."
msgstr ""
-"=> Anmerkung: Ein Eintrag wurde geÀndert:\n"
-"%s"
+"Bitte wĂ€hlen Sie, ĂŒber welches NetzwerkgerĂ€t Sie die \n"
+"Internetverbindung herstellen wollen."
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Photo memory card access on your HP multi-function device"
+msgstr ""
+
+#: ../../share/advertising/09-mdksecure.pl:1
+#, fuzzy, c-format
msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
msgstr ""
-"Bitte wÀhlen Sie die Nummer aus dem Bereich, die Sie bearbeiten wollen,\n"
-"oder betÀgen Sie die Eingabetaste um fort zu fahren.Ihre Wahl? "
+"MandrakeSoft arbeitet mit einer Reihe von Firmen zusammen, die "
+"professionelle Linux-Lösungen anbieten, die Mandrake-kompatibel sind. Sie "
+"finden eine Liste im MandrakeStore."
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Es gibt zahlreiche Auswahlmöglichkeiten (%s).\n"
+msgid "Internet Connection Sharing is now disabled."
+msgstr "Teilen der Internet-Verbindung ist nun abgeschaltet."
-#: ../../interactive/stdio.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Ihre Wahl? (Standard „%s“ %s) "
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr ""
-#: ../../interactive/stdio.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid " enter `void' for void entry"
-msgstr "Geben Sie „void“ fĂŒen Leeren Eintrag an"
+msgid "Latin American"
+msgstr "Lateinamerika"
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Japanese text printing mode"
+msgstr "Drucksystem Àndern"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Do you want to click on this button?"
-msgstr "Möchten Sie diese SchaltflÀche betÀtigen?"
+msgid "Old device file"
+msgstr "Alte GerÀtedatei"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Info: "
+msgstr "Info: "
#: ../../interactive/stdio.pm:1
#, c-format
msgid "Button `%s': %s"
msgstr "SchaltflĂ€che „%s“: %s"
-#: ../../interactive/stdio.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Ihre Wahl? (0/1, Standard ‚%s‘) "
+msgid "Please wait"
+msgstr "Bitte warten"
-#: ../../interactive/stdio.pm:1
+#: ../../mouse.pm:1
+#, c-format
+msgid "Genius NetMouse"
+msgstr "Genius NetMaus"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "None"
+msgstr "Keine"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The entered IP is not correct.\n"
+msgstr "Die eingegebene IP ist nicht korrekt.\n"
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Ethernet Card"
+msgstr "Netzwerkkarte"
+
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
+#, c-format
+msgid "Info"
+msgstr "Info"
+
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
+msgid "Install"
+msgstr "Installation"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Entries you'll have to fill:\n"
-"%s"
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
msgstr ""
-"Angaben, die Sie machen mĂŒssen:\n"
-"%s"
+"BetĂ€tigen Sie die SchaltflĂ€che „%s“, wenn Sie alle Partitionen und die\n"
+"darauf befindlichen Daten löschen wollen. Bedenken Sie, dass Sie nach\n"
+"betÀtigen der SchaltflÀche auch an die möglicherweise noch vorhandenen\n"
+"Windows-Daten nicht mehr gelangen werden!\n"
+"\n"
+"WĂ€hlen Sie „%s“, um die Aktion ohne Datenverlust abzubrechen."
-#: ../../modules/interactive.pm:1
+#: ../../steps.pm:1
+#, c-format
+msgid "Exit install"
+msgstr "Installation beenden"
+
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
msgstr ""
-"Laden von Modul %s schlug Fehl.\n"
-"Wollen Sie es erneut mit anderen Parametern versuchen?"
+"Es wurde alles eingerichtet.\n"
+"Sie können Ihre Internetverbindung nun anderen Rechnern in Ihrem \n"
+"lokalen Netz mittels automatischer Netzwerk-Konfiguration (DHCP) \n"
+"teilen."
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Specify options"
-msgstr "Optionen angeben"
+msgid "Remote CUPS server"
+msgstr "CUPS-Server im Netzwerkbetrieb"
-#: ../../modules/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Autoprobe"
-msgstr "Automatische Erkennung"
+msgid "Sun - Mouse"
+msgstr "Sun - Maus"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
msgstr ""
-"In einigen FĂ€llen benötigt der „%s“ Treiber zusĂ€tzliche Informationen,\n"
-"um korrekt zu funktionieren, meistens sollte er jedoch auch ohne \n"
-"funktionieren. Wollen Sie solche Informationen angeben oder es dem Treiber "
-"ĂŒberlassen, nach geeigneten Parametern zu suchen? (Das Austesten durch den "
-"Treiber kann in seltenen FĂ€llen zum „HĂ€ngenbleiben“ des Rechners fĂŒhren, was "
-"jedoch keine HardwareschÀden nach sich ziehen sollte)"
+"Sie haben nur eine konfiguriertes NetzwerkgerÀt an Ihrem Rechner:\n"
+"\n"
+"%s\n"
+"\n"
+"Ich setze ihr lokales Netz damit auf."
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Welchen %s-Treiber soll ich versuchen?"
+msgid "Minimal install"
+msgstr "Minimal-Installation"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Module options:"
-msgstr "Modul-Optionen:"
+msgid "Ethiopia"
+msgstr "Äthiopien"
-#: ../../modules/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Sie mĂŒssen nun die Optionen fĂŒr Modul %s angeben.\n"
-"Optionen haben die Form „name=wert name2=wert2“.\n"
-"Beispielsweise: „io=0x300 irq=7“"
+msgid "Devanagari"
+msgstr "Devanagari"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
msgstr ""
-"Sie können nun die Optionen fĂŒr Modul %s angeben.\n"
-"Denken Sie daran, dass Adressen mit „0x“ beginnen mĂŒssen, etwa „0x300“"
-
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "(module %s)"
-msgstr "(Modul %s)"
+"- PCI GerÀte: PCI-Slot, GerÀt und GerÀtetyp\n"
+"- EIDE GerÀte: Master- oder Slave-GerÀt\n"
+"- SCSI GerÀte: Der SCSI-Bus und die GerÀte-ID"
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Installation des Treibers fĂŒr die Karte %s %s"
+msgid "Total size: %d / %d MB"
+msgstr "GesamtgrĂ¶ĂŸe: %d / %d MB"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "See hardware info"
-msgstr "Hardware Informationen anzeigen"
+msgid "disabled"
+msgstr "deaktiviert"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "VerfĂŒgen Sie ĂŒber %s Schnittstellen?"
+msgid "Search for new scanners"
+msgstr "Suche nach neuen Scanern"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Do you have another one?"
-msgstr "VerfĂŒgen Sie ĂŒber weitere?"
+msgid "Disabling servers..."
+msgstr "Server deaktivieren ..."
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Schnittstelle(n) %s %s gefunden"
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr ""
+"Bitte wÀhlen Sie das Zeitintervall \n"
+"zwischen zwei Sicherungen."
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "Sie können alle Modulparamerter hier einstellen."
+msgid "Installation of %s failed. The following error occured:"
+msgstr "Die Installation von %s schlug Fehl. Folgender Fehler trat auf:"
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "comma separated strings"
-msgstr "durch Kommas getrennte Textfelder"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr "Ich kann „mkinitrd -f /boot/initrd-%s.img %s“ nicht ausfĂŒhren."
-#: ../../modules/parameters.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "comma separated numbers"
-msgstr "durch Kommas getrennte Nummern"
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
+msgstr ""
+"Sie haben die folgenden Server ausgewÀhlt: %s\n"
+"\n"
+"\n"
+"Diese Server werden standardmĂ€ĂŸig aktiviert. Sie haben keine bekannten\n"
+"Sicherheitsprobleme, jedoch könnten einige neue entdeckt werden. Stellen\n"
+"Sie deshalb sicher, dass Sie diese Pakete so zeitig wie möglich "
+"aktualisieren.\n"
+"\n"
+"\n"
+"Wollen Sie diese Server wirklich installieren?\n"
-#: ../../modules/parameters.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "%d comma separated strings"
-msgstr "%d durch Kommas getrennte Textfelder"
+msgid "Network printer (TCP/Socket)"
+msgstr "Netzwerkdrucker (TCP/Socket)"
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d durch Kommas getrennte Nummern"
+msgid "Backup User files..."
+msgstr "Benutzerdateien sichern ..."
-#: ../../modules/parameters.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "a number"
-msgstr "eine Nummer"
+msgid "Install system"
+msgstr "System installieren"
-#: ../../network/adsl.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
-msgstr ""
+msgid "First DNS Server (optional)"
+msgstr "Erster DNS Server (optional)"
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
+"Alternatively, you can specify a device name/file name in the input line"
msgstr ""
-"Der gebrÀuchlichste Weg mit ADSL eine Verbindung aufzubauen ist pppoe.\n"
-"Einige Verbindungen benutzen jedoch pptp, andere dhcp.\n"
-"Wenn Sie nicht wissen was Sie brauchen, wĂ€hlen Sie „pppoe verwenden“"
+"Alternativ können Sie einen GerÀte- oder Dateinamen in der Eingabezeile "
+"angeben"
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Connect to the Internet"
-msgstr "Internetverbindung"
+msgid "dhcpd Config..."
+msgstr "DHCP Konfigurieren ..."
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Sagem (using pppoa) usb"
+msgid "The setup has already been done, but it's currently disabled."
msgstr ""
+"Die Einstellungen wurden bereits vorgenommen, sie sind nur nicht aktiviert."
-#: ../../network/adsl.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch USB"
+msgid "LILO/grub Installation"
+msgstr "LILO/Grub Installation"
-#: ../../network/adsl.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "use dhcp"
-msgstr "DHCP verwenden"
+msgid "Israeli"
+msgstr "Israel"
-#: ../../network/adsl.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "use pptp"
-msgstr "PPTP verwenden"
+msgid "load setting"
+msgstr "Einstellungen laden"
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "use pppoe"
-msgstr "PPPOE verwenden"
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "Drucker „%s“, auf Server „%s“"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Other ports"
-msgstr "Andere Ports"
+msgid "Floppy can be removed now"
+msgstr "Sie können die Diskette nun entfernen"
-#: ../../network/drakfirewall.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Truly minimal install"
+msgstr "Minimal-Installation"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Everything (no firewall)"
-msgstr "Alles (Keine Firewall)"
+msgid "Denmark"
+msgstr "DĂ€nemark"
-#: ../../network/drakfirewall.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
-msgstr ""
-"Angabe eines ungĂŒltigen Ports: „%s“.\n"
-"Das Format lautet: „port/tcp“ oder „port/udp“, \n"
-"wobei Port eine Zahl zwischen 1 und 65535."
+msgid "Moving partition..."
+msgstr "Bewege Partition..."
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
-msgstr ""
-"Sie können verschiedene Ports angeben. \n"
-"Korrekte Beispiele sind: 139/tcp 139/udp.\n"
-"FĂŒr weitere Informationen schauen Sie in „/etc/services“."
+msgid "(This) DHCP Server IP"
+msgstr "(Diese) DHCP-Server IP"
-#: ../../network/drakfirewall.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr "Auf welche Dienste daf aus dem Internet zugegeriffenwerden?"
+msgid "Test of the configuration"
+msgstr "PrĂŒfen der Einstellungen"
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Installing %s ..."
+msgstr "Installiere %s ..."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"drakfirewall configurator\n"
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
+"\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
+"\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
+"\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
msgstr ""
-"DrakFirewall Konfigurierer\n"
+"Schlussendlich erhalten Sie (falls Sie sich fĂŒr „%s“ entschieden haben)\n"
+"eine Baumliste aller Pakete die zu den von Ihnen gewĂŒnschten Gruppen\n"
+"gehören. Diese Pakete sind nach Gruppen und Untergruppen klassifiziert.\n"
+"Beim Durchstöbern des Baums, können Sie Gruppen, Untergruppen oder einzelne\n"
+"Pakete markieren oder deren Markierung entfernen.\n"
"\n"
-"Stellen Sie sicher, dass Sie Ihre Netzwerk-/Internetverbindung\n"
-"mit DrakConnect eingerichtet haben, bevor Sie fortfahren."
+"Sobald Sie ein Paket auswÀhlen, erscheint rechts eine kurze Beschreibung.\n"
+"Sobald Sie die Auswahl abgeschlossen haben, bestÀtigen Sie das durch\n"
+"DrĂŒcken der SchaltflĂ€che „%s“. Nun beginnt die eigentliche Installation.\n"
+"Falls Sie eine Vielzahl von Paketen installieren wollen, können Sie nun\n"
+"getrost einen Kaffee trinken gehen.\n"
+"\n"
+"!! Es kommt vor, dass Server- und Dienst-Pakete angewÀhlt wurden - entweder\n"
+"absichtlich, oder als Paket einer ganzen Gruppe; sollte das der Fall sein,\n"
+"werden Sie nun gefragt, ob Sie diese wirklich installiert haben wollen.\n"
+"Unter Mandrake Linux werden installierte Server und Dienste automatisch\n"
+"beim Betriebssystemstart gestartet. Selbst wenn zum Zeitpunkt, als die\n"
+"Distribution zusammengestellt wurde, keine SicherheitslĂŒcken oder Fehler in\n"
+"diesen Paketen bekannt waren, ist natĂŒrlich nicht auszuschließen, dass\n"
+"spÀter solche Fehler gefunden werden. Sollten Sie also nicht wissen, wovon\n"
+"hier die Rede ist, wĂ€hlen Sie sicherheitshalber lieber „%s“. Falls Sie mit\n"
+"„%s“ antworten, werden die Dienste und Server installiert und stehen Ihnen\n"
+"nach der Installation standardmĂ€ĂŸig zur VerfĂŒgung. !!\n"
+"\n"
+"Die Option „%s“ unterdrĂŒckt nur die Warnungen, die erscheinen, wenn das\n"
+"Installationsprogramm Pakete automatisch markiert, um PaketabhÀngigkeiten\n"
+"aufzulösen, wenn Sie ein Paket auswÀhlen.\n"
+"\n"
+"Das kleine Diskettensymbol am unteren Rand der Liste ermöglicht es Ihnen,\n"
+"die wÀhrend einer vorangegangenen Installation gespeicherte Paketauswahl\n"
+"erneut zu verwenden. Durch BetÀtigen der SchaltflÀche öffnen Sie einen\n"
+"Dialog, der Sie auffordert, die Diskette einzulegen, die die Auswahl der\n"
+"frĂŒheren Installation enthĂ€lt. Um zu erfahren, wie Sie diese Diskette\n"
+"erstellen, lesen Sie bitte den zweiten Tipp des vorangegangenen\n"
+"Installationsschrittes."
-#: ../../network/drakfirewall.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Choose your filesystem encryption key"
+msgstr "WĂ€hlen Sie Ihren Dateisystem-SchlĂŒssel (Passwort)"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
msgstr ""
-"DrakFirewall Konfigurierer\n"
-"\n"
-"Hiermit konfigurieren Sie eine persönliche Firewall fĂŒr diesen\n"
-"Mandrake Linux Rechner. Sollten Sie an einer speziellen ausgereiften\n"
-"Firewall-Lösung interessiert sein, schauen Sie sich nach der speziell\n"
-"dafĂŒr entwickelten MandrakeSecurity Firewall Distribution um."
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No network card"
-msgstr "Keine Netzwerkkarte"
+msgid "Andorra"
+msgstr "Andorra"
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "POP and IMAP Server"
-msgstr "POP und IMAP Server"
+msgid "Sierra Leone"
+msgstr "Sierra Leone"
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mail Server"
-msgstr "E-Mailserver"
+msgid "Botswana"
+msgstr "Botswana"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Domain Name Server"
-msgstr "DomÀnen-Namenserver (DNS)"
+msgid "(default value: %s)"
+msgstr " (Voreinstellung: %s)"
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Web Server"
-msgstr "Webserver"
+msgid "Alternative test page (Letter)"
+msgstr "Alternative Testseite (US-Format - „Letter“)"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Zeroconf host name must not contain a ."
+msgid ""
+"DHCP Server Configuration.\n"
+"\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
+"\n"
msgstr ""
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Host name"
-msgstr "Rechnername"
+msgid "Choose an X server"
+msgstr "WĂ€hlen Sie einen X Server"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Zeroconf Host name"
-msgstr "Zeroconf Rechnername"
+msgid "Swap partition size in MB: "
+msgstr "GrĂ¶ĂŸe der Auslagerungspartition in MB: "
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"\n"
-"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
+"Other (not drakbackup)\n"
+"keys in place already"
msgstr ""
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configuring network"
-msgstr "Netzwerk konfigurieren"
+msgid "No changes to backup!"
+msgstr "Keine Änderungen zu sichern!"
-#: ../../network/ethernet.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Formatted\n"
+msgstr "Formatiert\n"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Type of install"
+msgstr "Installationsklasse"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "Drucker „%s“ am SMB/Windows Server „%s“"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
+"\n"
+"- Daemon (%s) include:\n"
msgstr ""
-"Bitte wĂ€hlen Sie, ĂŒber welches NetzwerkgerĂ€t Sie die \n"
-"Internetverbindung herstellen wollen."
+"\n"
+"- DÀmon (%s) enthÀlt:\n"
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Choose the network interface"
-msgstr "WĂ€hlen Sie die Netzwerkkarte"
+msgid "%d comma separated numbers"
+msgstr "%d durch Kommas getrennte Nummern"
-#: ../../network/ethernet.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
msgstr ""
-"Ich habe keine Ethernet-Netzwerkkarte finden können, daher kanndieser "
-"Verbindungstyp nicht konfiguriert werden."
+"Der Dienst rusers ermöglicht es Anwendern anderer Rechner \n"
+"herauszubekommen, welche Benutzerkennzeichen auf diesem Rechner \n"
+"gerade angemeldet sind."
-#: ../../network/ethernet.pm:1
+#: ../../standalone/drakautoinst:1
+#, c-format
+msgid "Automatic Steps Configuration"
+msgstr "Automatische Konfiguration der Schritte"
+
+#: ../../share/advertising/02-community.pl:1
#, c-format
msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
msgstr ""
-"Welchen DHCP Klienten wollen Sie verwenden?\n"
-"Voreingestellt ist „dhcp-client“"
+"Wollen Sie mehr ĂŒber die Open Source Gemeinde wissen? Betreten Sie die Welt "
+"der Freien Software!"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Ich konnte keine PCI ISDN-Karte finden.\n"
-"Bitte wĂ€hlen Sie im nĂ€chsten MenĂŒ eine aus."
+msgid "Barbados"
+msgstr "Barbados"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please select data to backup..."
+msgstr "Bitte wÀhlen Sie die zu sichernden Daten..."
+
+#: ../../standalone/net_monitor:1
#, c-format
msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
msgstr ""
-"Ich habe eine PCI ISDN-Karte gefunden, \n"
-"kenne sie jedoch nicht. Bitte helfen Sie mir,\n"
-"indem Sie im nĂ€chsten MenĂŒ eine auswĂ€hlen."
-#: ../../network/isdn.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Welche der folgenden ist Ihre ISDN-Karte?"
+msgid "received"
+msgstr "Empfangen"
-#: ../../network/isdn.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "ISDN Configuration"
-msgstr "ISDN Konfiguration"
+msgid "/File/_New"
+msgstr "/Datei/_Neu"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Abort"
-msgstr "Abbruch"
+msgid "The DNS Server IP"
+msgstr "Die IP des DNS-Servers"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Continue"
-msgstr "Fortfahren"
+msgid "IP Range End:"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
-"\n"
-"Falls Sie eine ISA-Karte besitzen, sollten die Einstellungen auf dem "
-"nÀchsten Schirm korrekt sein.\n"
-"\n"
-"Falls Sie eine PCMCIA-Karte besitzen, mĂŒssen Sie IRQ und E/A-Bereich Ihrer "
-"Karte kennen.\n"
+msgid "High"
+msgstr "Hoch"
-#: ../../network/isdn.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "I don't know"
-msgstr "Keine Ahnung"
+msgid "NoVideo"
+msgstr "NoVideo"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "this field describes the device"
+msgstr "Dieses Feld beschreibt das GerÀt"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "PCI"
-msgstr "PCI"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Drucker fĂŒr StarOffice/OpenOffice.org/GIMP hinzufĂŒgen"
-#: ../../network/isdn.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA/PCMCIA"
+msgid "Local Printers"
+msgstr "Lokale Drucker"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "What kind of card do you have?"
-msgstr "Welchen Kartentyp verwenden Sie?"
+msgid "Installation image directory"
+msgstr "Verzeichnis des Installationsabbildes"
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr "Schnittstelle \"%s\" gefunden. Wollen Sie sie verwenden?"
+msgid "NIS Server"
+msgstr "NIS Server"
-#: ../../network/isdn.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Welches Protokoll wollen Sie verwenden?"
+msgid "Port: %s"
+msgstr "Port: %s"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Protokoll fĂŒr den Rest der Welt"
+msgid "Spain"
+msgstr "Spanien"
-#: ../../network/isdn.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-"Protokoll fĂŒr den Rest der Welt \n"
-"ohne D-Kanal (Leased Lines)"
+msgid "This user name has already been added"
+msgstr "Dieses Benutzerkennzeichen existiert bereits"
-#: ../../network/isdn.pm:1
+#: ../../interactive.pm:1
#, c-format
-msgid "European protocol"
-msgstr "EuropÀisches Protokoll"
+msgid "Choose a file"
+msgstr "WĂ€hlen Sie eine Datei"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "EuropÀisches Protokoll (EDSS1)"
+msgid "Apply"
+msgstr "Anwenden"
-#: ../../network/isdn.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Auto-detect available ports"
+msgstr "/Drucker automatisch erkennen"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
-msgstr ""
-"WĂ€hlen Sie Ihren Netzanbieter.\n"
-"Sollte er nicht aufgefĂŒhrt sein, wĂ€hlen Sie „Nicht aufgefĂŒhrt“"
+msgid "Internet Connection Sharing currently disabled"
+msgstr "Teilen der Internet-Verbindung momentan abgeschaltet."
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "External ISDN modem"
-msgstr "Externes ISDN Modem"
+msgid "San Marino"
+msgstr "San Marino"
-#: ../../network/isdn.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Internal ISDN card"
-msgstr "Interne ISDN Karte"
+msgid "Belgium"
+msgstr "Belgien"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "Um welchen Typ ISDN-Verbindung handelt es sich?"
+msgid "Kuwait"
+msgstr "Kuwait"
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Network Configuration Wizard"
-msgstr "Netzwerk Konfigurationsassistent"
+msgid "Choose the window manager to run:"
+msgstr "WĂ€hlen Sie den Window-Manager, den Sie verwenden wollen:"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "Alte Konfiguration (isdn4net)"
+msgid "sub generation of the cpu"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "New configuration (isdn-light)"
-msgstr "Neue Konfiguration (isdn-light)"
+msgid "First Time Wizard"
+msgstr "First Time Assistent"
-#: ../../network/isdn.pm:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
msgstr ""
-"Welche ISDN Konfiguration wollen Sie durchfĂŒhren?\n"
-"\n"
-"* Die alte Konfiguration verwendet „isdn4net“. Sie \n"
-" enthÀllt mÀchtigere Werkzeuge, ist jedoch komplizierter \n"
-" einzurichten und nicht voll standardkonform.\n"
-"\n"
-"* Die neue Konfiguration mit „isdn-light“ ist \n"
-" verstÀndlicher und standardkonformer, sie enthÀllt \n"
-" jedoch weniger Werkzeuge.\n"
-"\n"
-"Wir empfehlen die „isdn-light“ Variante.\n"
+"Es trat ein Fehler auf. Ich weiß jedoch nicht, wie ich damit sinnvoll \n"
+"umgehen soll. Sie können fortfahren, jedoch auf eigenes Risiko!"
-#: ../../network/modem.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Do nothing"
-msgstr "Tu nichts"
+msgid "please wait, parsing file: %s"
+msgstr "Einen Moment, ich durchsuche: %s"
-#: ../../network/modem.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Install rpm"
-msgstr "Installiere RPM"
+msgid "Taiwan"
+msgstr "Taiwan"
-#: ../../network/modem.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Pakistan"
+msgstr "Pakistan"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
msgstr ""
+"Um mit Ihrem Lexmark-Tintenstrahldrucker drucken zu können, benötigen Sie "
+"die Treiber, die von Lexmark bereitgestellt werden (http://www.lexmark."
+"com/). Klicken Sie auf den „Drivers“-Link. WĂ€hlen Sie dann das Druckermodell "
+"und geben Sie „Linux“ als Betriebssystem an. Sie erhalten die Treiber als "
+"RPM-Paket oder als Shellskript mit interaktiver grafischer Installation. Sie "
+"mĂŒssen die Einrichtung nicht mit dem Lexmark-Klicktool vornehmen. Sie können "
+"direkt nach der Lizenz auf „Abbruch“ drĂŒcken. Drucken Sie dann die Druckkopf-"
+"Justierungsseiten mit „lexmarkmaintain“ und justieren Sie damit den "
+"Druckkopf."
-#: ../../network/modem.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Title"
-msgstr "Titel"
+msgid "Permissions"
+msgstr "Berechtigungen"
-#: ../../network/modem.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Provider name (ex provider.net)"
+msgstr "Name des Providers (z.B. provider.net) "
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Version: %s\n"
+msgstr "Version: %s\n"
+
+#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
-"Ihr Modem wird nicht durch das System unterstĂŒtzt.\n"
-"Schauen Sie unter http://www.linmodems.org"
+"Ihr Rechner hat nicht genug Ressourcen. Vermutlich werden bei der \n"
+"Installation Probleme auftreten. In diesem Fall sollten Sie eine \n"
+"Text-Installation versuchen. DrĂŒcken Sie dafĂŒr <F1> wĂ€hrend dem \n"
+"Installationsstart und geben Sie „text“ an der Eingabeaufforderung \n"
+"ein."
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Zweiter DNS Server (optional)"
+msgid "Use the Windows partition for loopback"
+msgstr "Auf der Windows Partition Loopbacks anlegen"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Erster DNS Server (optional)"
+msgid "Armenian (typewriter)"
+msgstr "Armenien (Schreibmaschine)"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Domain name"
-msgstr "Name der DomÀne"
+msgid "Connection type: "
+msgstr "Verbindungstyp: "
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "CHAP"
-msgstr "CHAP"
+msgid "Graphical interface"
+msgstr "Grafikumgebung"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Script-based"
-msgstr "Skript-basiert"
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s mit 3D-Hardwarebeschleunigung"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Terminal-based"
-msgstr "Terminal-basiert"
+msgid "India"
+msgstr "Indien"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid "Chad"
+msgstr "Tschad"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Login ID"
-msgstr "Login ID"
+msgid "Slovakia"
+msgstr "Slowakei"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Phone number"
-msgstr "Telefonnummer"
+msgid "Singapore"
+msgstr "Singapur"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connection name"
-msgstr "Name der Verbindung"
+msgid "Cambodia"
+msgstr "Kambodscha"
-#: ../../network/modem.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Dialup options"
-msgstr "Einwahl Parameter"
+msgid "Monitor HorizSync: %s\n"
+msgstr "Monitor Horiz. Frequenz: %s\n"
-#: ../../network/modem.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Bitte wÀhlen Sie den seriellen Anschluss, an dem Ihr Modem hÀngt."
+msgid "Path"
+msgstr ""
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Network Configuration"
-msgstr "Netzwerk konfigurieren"
+msgid ""
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
msgstr ""
-"WĂ€hrend der Konfiguration traten Fehler auf.\n"
-"Kontrollieren Sie Ihre Verbindung mit „net_monitor“ oder dem Mandrake "
-"Kontrollzentrum. Falls die Verbindung nicht funktioniert, sollten Sie erneut "
-"die Konfguration starten."
+"Das Drucksystem (%s) wird nicht automatisch beim Betriebssystemstart "
+"aktiviert.\n"
+"Es ist möglich, dass der Start durch den Wechsel in eine höhere "
+"Sicherheitsebene deaktiviert wurde, da das Drucksystem einen potentienllen "
+"Angriffspunkt darstellt.\n"
+"\n"
+"Wollen sie den automatischen Start des Drucksystems wieder herstellen?"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
+"Printer %s\n"
+"What do you want to modify on this printer?"
msgstr ""
-"Es ist sehr empfehlenswert, im Anschluss Ihre X-OberflÀche\n"
-"neu zu starten, um Probleme, die durch die Änderung des\n"
-"Rechnernamens hervorgerufen werden, zu vermeiden."
+"Drucker %s\n"
+"Was wollen Sie an diesem Drucker Àndern?"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Add host"
+msgstr "HinzufĂŒgen eines Rechners"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
"\n"
+"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
-"Herzlichen GlĂŒckwunsch, die Netzwerk-/Internet-Einrichtung ist beendet.\n"
-"\n"
-"Die Konfiguration wird nun in Ihr System integriert.\n"
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"A problem occured while restarting the network: \n"
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
"\n"
-"%s"
+"\"Custom\" permit a per-user granularity.\n"
msgstr ""
-"Beim Neustart des Netzwerks trat ein Fehler auf: \n"
+"Wollen Sie Benutzern erlaubern, Verzeichnisse freizugeben?\n"
+"Wenn Sie das erlauben, können die Anwender Verzeichnisse in Konqueror oder "
+"Nautilus im KontextmenĂŒ der entsprechenden Verzeichnisses freigeben.\n"
"\n"
-"%s"
+"Mit „Benutzerdefiniert“ können Sie eine Einstellung pro Kennzeichen "
+"vornehmen.\n"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr "Das Netzwerk muss neu gestartet werden. Soll ich es neu starten?"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
+msgstr ""
+"Bitte wÀhlen Sie, ob die Paketauswahl von Diskette geladen \n"
+"oder darauf gespeichert werden soll. Es handelt sich um das \n"
+"selbe Format, wie die unter „auto_install“ erzeugten Disketten."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Network configuration"
-msgstr "Netzwerk Konfiguration"
+msgid "China (broadcast)"
+msgstr "China (terrestrisch)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Möchten Sie die Verbindung bei Betriebssystemstart herstellen?"
+msgid "Use quota for backup files."
+msgstr "Quota fĂŒr Backup-Datei verwenden."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Configuring printer \"%s\"..."
+msgstr "Drucker „%s“ konfigurieren ..."
#: ../../network/netconnect.pm:1
#, c-format
msgid "Internet connection"
msgstr "Internet-Verbindung"
-#: ../../network/netconnect.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
msgstr ""
-"Sie haben verschiedene Varianten eingerichtet, sich mit dem\n"
-"Internet zu verbinden. Bitte wÀhlen Sie, welche Verbindungsart\n"
-"ich versuchen soll.\n"
-"\n"
+"Laden von Modul %s schlug Fehl.\n"
+"Wollen Sie es erneut mit anderen Parametern versuchen?"
-#: ../../network/netconnect.pm:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "WĂ€hlen Sie die Verbindung, die Sie konfigurieren wollen"
+msgid "Welcome to the Open Source world."
+msgstr "Willkommen in der Open Source Welt."
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "ethernet card(s) detected"
-msgstr "Netzwerkkarte(n) gefunden"
+msgid "Bosnia and Herzegovina"
+msgstr "Bosnien-Herzegovina"
-#: ../../network/netconnect.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "LAN connection"
-msgstr "LAN Verbindung"
+msgid ""
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
+msgstr ""
+"Sie benötigen ein echtes GNU/Linux Dateisystem (Ext2/Ext3, ReiserFS, XFS "
+"oder JFS) fĂŒr diesen EinhĂ€ngpunkt.\n"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "cable connection detected"
-msgstr "Kabel Verbindung gefunden"
+msgid "You must enter a host name or an IP address.\n"
+msgstr "Sie mĂŒssen einen Rechnernamen oder eine IP eingeben.\n"
-#: ../../network/netconnect.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Cable connection"
-msgstr "Kabel Verbindung"
+msgid "Netherlands"
+msgstr "Holland"
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "detected"
-msgstr "gefunden"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "Dateien ĂŒbertragen ..."
-#: ../../network/netconnect.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "ADSL connection"
-msgstr "ADSL Verbindung"
+msgid "Internal ISDN card"
+msgstr "Interne ISDN Karte"
-#: ../../network/netconnect.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "detected %s"
-msgstr "%s gefunden"
+msgid ""
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
+msgstr ""
+"Es existiert kein alternativer OSS/ALSA Treiber fĂŒr Ihre Soundkarte (%s), "
+"die momentan „%s“ verwendet."
-#: ../../network/netconnect.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "ISDN connection"
-msgstr "ISDN Verbindung"
+msgid "Title"
+msgstr "Titel"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Winmodem connection"
-msgstr "Winmodem Verbindung"
+msgid "Install & convert Fonts"
+msgstr "Installiere und konvertiere Fonts"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "detected on port %s"
-msgstr "an Prot %s gefunden"
+msgid "WARNING"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Normal modem connection"
-msgstr "Normale Modem Verbindung"
+msgid "Installing bootloader"
+msgstr "Betriebssystemstarter installieren"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Detecting devices..."
-msgstr "GerÀteerkennung..."
+msgid "replay"
+msgstr "wiederholen"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Expert Mode"
-msgstr "Expertenmodus"
+msgid "detected %s"
+msgstr "%s gefunden"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use auto detection"
-msgstr "Autoerkennung benutzen"
+msgid "Virgin Islands (U.S.)"
+msgstr "Jungfern-Inseln (U.S.)"
-#: ../../network/netconnect.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Choose the profile to configure"
-msgstr "WĂ€hlen Sie das Profil, dass eingestellt werden soll"
+msgid "Bad backup file"
+msgstr "Fehlerhafte Backup-Datei"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Welcome to The Network Configuration Wizard.\n"
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
+"What would you like to do?"
msgstr ""
-"Willkommen zum Netzwerk Konfigurationsassistent.\n"
+"Die Einrichtung einer gemeinsamen Internet-Verbindung wurde bereits "
+"durchgefĂŒhrt.\n"
+"Momentan ist sie deaktiviert.\n"
"\n"
-"Ich versuche nun Ihre Internet-/Netzwerk-Verbindung zu konfigurieren.\n"
-"Falls Sie keine Autodetektion wĂŒnschen, entfernen Sie bitte die Markierung.\n"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Da Sie eine Netzwerkinstallation durchfĂŒhren, ist Ihr Netzwerk bereits\n"
-"konfiguriert. WĂ€hlen Sie „OK“, um diese Einstellung beizubehalten oder\n"
-"„Abbruch“, um Ihre Internet- und Netzwerk-Konfiguration neu zu\n"
-"konfigurieren.\n"
+"Was wollen Sie tun?"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
+msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""
-"\n"
-"\n"
-"\n"
-"Wir werden nun die Verbindung „%s“ konfigurieren.\n"
-"\n"
-"\n"
-"WĂ€hlen Sie „OK“, um fortzufahren."
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Wir werden nun die Verbindung „%s“ konfigurieren."
+msgid "Pipe into command"
+msgstr "An ein Kommando weiterleiten"
-#: ../../network/netconnect.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Internet connection & configuration"
-msgstr "Internetverbindung und -einrichtung"
+msgid ""
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
+msgstr ""
+"Einige Hardware Komponenten Ihres Rechners benötigen „proprietĂ€re“\n"
+"Treiber. Weitere Infos hierzu finden Sie unter: %s"
-#: ../../network/netconnect.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configure the connection"
-msgstr "Die Verbindung konfigurieren"
+msgid "Detecting devices..."
+msgstr "GerÀteerkennung..."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Disconnect"
-msgstr "Verbindung trennen"
+msgid "Click here to launch the wizard ->"
+msgstr "Hier starten Sie den Assistenten ->"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connect"
-msgstr "Verbinden"
+msgid "Haiti"
+msgstr "Haiti"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
+"Description of the fields:\n"
"\n"
-"You can reconfigure your connection."
msgstr ""
+"Beschreibung der Felder:\n"
"\n"
-"Sie können Ihre Internetverbindung neu konfigurieren"
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Sie können eine Internetverbindung aufbauen oder die Verbindung neu "
-"konfigurieren"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the name of the CPU"
+msgstr "Herstellername des GerÀts"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "Sie sind momentan nicht mit dem Internet verbunden."
+msgid "Refreshing printer data..."
+msgstr "Aktualisieren der Druckerdaten ..."
-#: ../../network/netconnect.pm:1
+#: ../../install2.pm:1
#, c-format
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Sie können die Verbindung trennen oder sie neu konfigurieren."
+msgid "You must also format %s"
+msgstr "Sie mĂŒssen auch %s formatieren."
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You are currently connected to the Internet."
-msgstr "Sie sind momentan mit dem Internet verbunden."
+msgid "Be careful: this operation is dangerous."
+msgstr "Vorsicht: Diese Aktion ist gefÀhrlich."
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "Die URL muss mit „http://“ oder „ftp://“ beginnen"
+msgid "Insert a floppy containing package selection"
+msgstr ""
+"Legen Sie eine Diskette ein, auf der Ihre Paketauswahl gespeichert ist."
-#: ../../network/network.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Proxy should be http://..."
-msgstr "Proxy muss „http://...“ sein"
+msgid "Server: "
+msgstr "Server: "
-#: ../../network/network.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "FTP proxy"
-msgstr "FTP Proxy"
+msgid "Security Alerts:"
+msgstr "Sicherheitswarnungen:"
-#: ../../network/network.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "HTTP proxy"
-msgstr "HTTP Proxy"
+msgid "Sweden"
+msgstr "Schweden"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Proxies configuration"
-msgstr "Proxies einstellen"
+msgid "Use Expect for SSH"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "Die IP Adresse des Gateways sollte etwa die Form „192.168.1.42“ haben!"
+msgid "Poland"
+msgstr "Polen"
-#: ../../network/network.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr ""
-"Die IP Adresse des DNS-Servers sollte etwa die Form „192.168.1.42“ haben!"
+msgid "Importance: %s\n"
+msgstr "Wichtigkeit: %s\n"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Gateway device"
-msgstr "Gateway GerÀt"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr "Geben Sie an, ob sie Ihr Band nach dem Backup auswerfen wollen."
-#: ../../network/network.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (etwa %s)"
+msgid "Other ports"
+msgstr "Andere Ports"
-#: ../../network/network.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "DNS server"
-msgstr "DNS-Server"
+msgid "number of capture buffers for mmap'ed capture"
+msgstr "Anzahl der Puffer fĂŒr MMAP Aufnahmen"
-#: ../../network/network.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
-msgstr ""
-"Bitte geben Sie ihren Rechnernamen an.\n"
-"Ihr Rechnername sollte auch die Domain beinhalten,\n"
-"etwa „meinrechner.meineabteilung.meinefirma.de“.\n"
-"Falls Sie ein Gateway verwenden, sollten Sie auch dessen IP-Adresse angeben."
+msgid "SMBus controllers"
+msgstr "SMBus-Controller"
-#: ../../network/network.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
-"Die Rate sollte entweder eine Mengengeneinheit aus ‚k‘, ‚M‘ und ‚G‘ nutzen "
-"(etwa „11M“ fĂŒr 11M) oder die entsprechende Anzahl Nullen angehĂ€ngt werden."
+msgid "Connection timeout (in sec)"
+msgstr "VerbindungsTimeout (in Sec)"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
msgstr ""
-"Die Frequenz sollte entweder eine Mengengeneinheit aus ‚k‘, ‚M‘ und ‚G‘ "
-"nutzen (etwa „2.46G“ fĂŒr 2,46GHz) oder die entsprechende Anzahl Nullen "
-"angehÀngt werden."
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Die IP Adresse sollte etwa die Form „192.168.1.42“ haben!"
-
-#: ../../network/network.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Start at boot"
-msgstr "Beim BS-Start aktivieren"
+msgid "Croatian"
+msgstr "Kroatien"
-#: ../../network/network.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Sie mĂŒssen einen Rechnernamen oder eine IP eingeben.\n"
+msgid "Use existing partition"
+msgstr "Verwende existierende Partition(en)"
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Network Hotplugging"
-msgstr "Netzwerk hotplugfÀhig"
+msgid "Unable to contact mirror %s"
+msgstr "Ich kann nicht forken: %s"
-#: ../../network/network.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "Netzwerkkarten-ID ĂŒberwachen (sinnvoll fĂŒr Laptops)"
-
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "DHCP host name"
-msgstr "Rechnername"
+msgid "/Help/_About..."
+msgstr "/Hilfe/_Über ..."
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Netmask"
-msgstr "Netzmaske"
+msgid "Remove user directories before restore."
+msgstr "Benutzerkennzeichen vor dem Wiederherstellen entfernen."
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "IP address"
-msgstr "IP Adresse"
+msgid ""
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
+msgstr ""
+"Sie wollen einen entfernten Drucker einrichten. Sie benötigen dafĂŒr ein "
+"funktionerendes Netzwerk, aber Ihr Netzwerk ist noch nicht eingerichtet. "
+"Sollten Sie dennoch fortfahren, ohne Ihr Netzwerk einzurichten, ist der "
+"Drucker hinterher nicht zu verwenden. Wie wollen Sie fortfahren?"
-#: ../../network/network.pm:1
-#, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(BOOTP/DHCP/ZEROCONF)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "CUPS printer configuration"
+msgstr "Konfiguration des gemeinsamen Zugriffes auf CUPS-Drucker"
-#: ../../network/network.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Automatic IP"
-msgstr "Automatische IP-Adressen Zuweisung"
+msgid "could not find any font in your mounted partitions"
+msgstr "Ich konnte keine Schriften in Ihren eingehÀngten Partitionen finden"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " (driver %s)"
-msgstr " (Treiber %s)"
+msgid "F00f bug"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfigurieren der Netzwerkkarte %s"
+msgid "XFree %s"
+msgstr "XFree %s"
-#: ../../network/network.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
msgstr ""
-"Bitte geben Sie die IP Parameter dieser Maschine ein.\n"
-"Jeder Eintrag muss als dezimale IP-Adresse in Punktschreibweise \n"
-"angegeben werden (etwa „192.168.1.42“)."
+"Welchen DHCP Klienten wollen Sie verwenden?\n"
+"Voreingestellt ist „dhcp-client“"
-#: ../../network/network.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"WARNUNG: Dieses GerÀt wurde bereits zum Herstellen einer Internetverbindung "
-"konfiguriert.\n"
-"DrĂŒcken Sie einfach „OK“, um die Einstellungen zu behalten.\n"
-"Fall Sie Felder verĂ€ndern, wird die Konfiguration ĂŒberschrieben."
+msgid "Domain Name:"
+msgstr "Name der DomÀne:"
-#: ../../network/shorewall.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
-msgstr ""
-"WARNUNG: Ich habe eine eine Firewall-Konfiguration gefunden. \n"
-"Möglicherweise mĂŒssen Sie nach der Installation einige Einstellungen \n"
-"von Hand vornehmen."
+msgid "On Floppy"
+msgstr "Auf Diskette"
-#: ../../network/shorewall.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Ich habe eine Firewall-Konfiguration gefunden!"
+msgid "Restore"
+msgstr "Wiederherstellen"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Account Password"
-msgstr "Passwort"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Account Login (user name)"
-msgstr "Kennzeichen (Login)"
+msgid "Looking for available packages..."
+msgstr "Suche nach vorhandenen Paketen..."
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "VerbindungsTimeout (in Sec)"
+msgid "Init Message"
+msgstr "Init Nachricht"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Connection speed"
-msgstr "Verbindungsgeschwindigkeit"
+msgid "Rescue partition table"
+msgstr "Partitionstabelle retten"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Dialing mode"
-msgstr "Wahlmodus"
+msgid "Connection complete."
+msgstr "Verbindung fertiggestellt."
-#: ../../network/tools.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose your country"
-msgstr "Land auswÀhlen"
+msgid "Cyprus"
+msgstr "Zypern"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "Zweiter DNS des Providers (optional)"
+msgid "Remove from RAID"
+msgstr "Löschen aus dem RAID"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "Erster DNS des Providers (optional)"
+msgid "This encryption key is too simple (must be at least %d characters long)"
+msgstr ""
+"Dieses Passwort ist zu einfach (es muss mindestens %d Zeichen lang sein)!"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Provider phone number"
-msgstr "Telefonnummer des Providers"
+msgid "Configuration Wizards"
+msgstr "Konfigurationsassistenten"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Name des Providers (z.B. provider.net) "
+msgid "ISDN connection"
+msgstr "ISDN Verbindung"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Your personal phone number"
-msgstr "Ihre eigene Telefonnummer"
+msgid "primary"
+msgstr "PrimÀr"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Card IO_1"
-msgstr "Karten IO_1"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr "auf SMB/Windows-Server „%s“, Freigabe „%s“"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Card IO_0"
-msgstr "Karten IO_0"
+msgid ""
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
+"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
+"\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
+msgstr ""
+"Als nÀchstes können Sie die Dienste auswÀhlen, die wÀhrend des\n"
+"Betriebssystemstarts aktiviert werden sollen.\n"
+"\n"
+"Hier werden alle Dienste, die nach der aktuellen Installation zum BS-Start\n"
+"zur VerfĂŒgung stehen, angezeigt. Lesen Sie diese Liste sorgfĂ€ltig durch und\n"
+"markieren Sie nur die Dienste, die Sie immer ab dem BS-Start zur VerfĂŒgung\n"
+"haben wollen.\n"
+"\n"
+"Wenn Sie einen Dienst anwÀhlen, erhalten Sie eine kurze ErklÀrung dazu.\n"
+"Wenn Sie nicht sicher sind, ob ein Dienst bzw. Server sinnvoll ist oder\n"
+"nicht, verÀndern Sie am Besten die voreingestellten Markierungen nicht.\n"
+"\n"
+"!! Sollten Sie Ihren Rechner als Server verwenden wollen, so mĂŒssen Sie an\n"
+"dieser Stelle besonders vorsichtig sein: wÀhlen Sie alle Dienste ab, die\n"
+"Sie nicht benötigen. Denken Sie daran, dass etliche Dienste eine\n"
+"potentielle Einbruchstelle in das System von außen darstellen, wenn diese\n"
+"im Serverbetrieb laufen. Also, nur die Dienste einschalten, die Sie\n"
+"wirklich brauchen! !!"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Card IO"
-msgstr "Karten E/A"
+msgid "Skip"
+msgstr "Überspringen"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Card mem (DMA)"
-msgstr "Karten Mem (DMA)"
+msgid "Niue"
+msgstr "Niue"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../services.pm:1
#, c-format
-msgid "Card IRQ"
-msgstr "Karten IRQ"
+msgid ""
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
+msgstr ""
+"Dieser Dienst aktiviert NetzwerkgerÀte (etwa Netzwerkkarten), die \n"
+"so konfiguriert wurden, dass sie ab dem Systemstart zur VerfĂŒgung \n"
+"stehen sollen."
-#: ../../network/tools.pm:1
-#, c-format
-msgid "Please fill or check the field below"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid ""
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
msgstr ""
-"Bitte fĂŒllen Sie die folgen Felder aus \n"
-"bzw. makieren Sie die korrekten Angaben"
+"Die CPU-Frequenz in MHz (Megaherz), sie gibt eine erste NĂ€herung fĂŒr die "
+"anzahl Befehle, die der Prozessor pro Sekunde ausfĂŒhren kann."
-#: ../../network/tools.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Connection Configuration"
-msgstr "Verbindungskonfiguration"
+msgid "important"
+msgstr "wichtig"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Total Progress"
+msgstr "Fortschritt"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
+"\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
+"\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
+"\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
msgstr ""
-"Das System scheint nicht mit dem Internet verbunden zu sein.\n"
-"Versuchen Sie noch einmal Ihre Verbindung konfigurieren."
+"„DrakX“ versucht nun alle IDE Festplatten Ihres Systems zu finden. Unter\n"
+"Anderem sucht „DrakX“ auch nach PCI-SCSI-Karten, die es kennt, um sie\n"
+"automatisch mit dem richtigen Treiber einzubinden.\n"
+"\n"
+"Falls „DrakX“ nicht weiß, welcher Treiber funktioniert, werden Sie gebeten,\n"
+"„DrakX“ zu helfen.\n"
+"\n"
+"Falls „DrakX“ nicht in der Lage ist, die Parameter selbst zu finden, die\n"
+"dem Modul zu ĂŒbergeben sind, mĂŒssen Sie diese angeben.\n"
+"\n"
+"Sie können die benötigten Informationen etwa unter Windows (sofern das auf\n"
+"Ihren Rechner installiert ist) finden, aus den HandbĂŒchern, die sie mit dem\n"
+"Adapter erhalten haben oder von den Web-Seiten des Hardware-Anbieters\n"
+"(sofern Sie einen WWW-Zugang haben)."
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Aus SicherheitsgrĂŒnden wird die Verbindung nun unterbrochen."
+msgid "Users"
+msgstr "Benutzer"
-#: ../../network/tools.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Das System ist jetzt mit dem Internet verbunden."
+msgid "Aruba"
+msgstr "Aruba"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Testing your connection..."
-msgstr "Ich teste gerade Ihre Verbindung..."
+msgid "Preparing bootloader..."
+msgstr "Betriebssystemstarter vorbereiten..."
-#: ../../network/tools.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Möchten Sie jetzt versuchen eine Internetverbindung aufzubauen?"
+msgid "Gateway (e.g. %s)"
+msgstr "Gateway (etwa %s)"
-#: ../../network/tools.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Internet configuration"
-msgstr "Internet Konfiguration"
+msgid "The passwords do not match"
+msgstr "Die Passwörter stimmen nicht ĂŒberein"
-#: ../../partition_table/raw.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Examples for correct IPs:\n"
+msgstr "Beispiele fĂŒr korrekte IPs:\n"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Frequency (MHz)"
+msgstr "Frequenz (MHz)"
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
msgstr ""
-"Mit Ihrer Platte stimmt etwas nicht!\n"
-"Der vorgenommene IntegritÀtstest schlug Fehl.\n"
-"Das bedeutet, dass jeder Schreibvorgang auf der Platte zu zufÀlligen oder "
-"beschĂ€digten Daten fĂŒhren wird."
+"Um diese gespeicherte Paketauswahl zu verwenden, starten Sie die \n"
+"Installation bitte mit: „boot defcfg=floppy“"
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " (Default)"
-msgstr " (Standard)"
+msgid "the number of the processor"
+msgstr "die Nummer des Prozessors"
-#: ../../printer/cups.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Auf CUPS-Server „%s“"
+msgid "Hardware clock set to GMT"
+msgstr "Hardware Uhr liefert GMT"
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Remote Printers"
-msgstr "Netzwerkdrucker"
+msgid "Give a file name"
+msgstr "Dateinamen angeben"
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "CUPS"
-msgstr "CUPS"
+msgid "Please choose the port that your printer is connected to."
+msgstr "Bitte wÀhlen Sie den Anschluss, an dem Ihr Drucker hÀngt."
-#: ../../printer/cups.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "(on this machine)"
-msgstr "(an diesem Rechner)"
+msgid "Change Cd-Rom"
+msgstr "CD-ROM wechseln"
-#: ../../printer/cups.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "(on %s)"
-msgstr "(an %s)"
+msgid "Paraguay"
+msgstr "Paraguay"
-#: ../../printer/data.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
+msgstr "Inkrementelle Archivierung (alte Archive nicht ersetzen)"
+
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
+msgid "There's no known driver for your sound card (%s)"
+msgstr "Es gibt keinen bekannten Treiber fĂŒr Ihre Soundkarte (%s)"
-#: ../../printer/data.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "LPRng"
-msgstr "LPRng"
+msgid "force"
+msgstr " mit Gewalt "
-#: ../../printer/data.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
+msgid "Exit"
+msgstr "Verlassen"
-#: ../../printer/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "LPD"
-msgstr "LPD"
+msgid ""
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
+msgstr ""
+"ANMERKUNG: Je nach Drucker und Drucksystem werden bis zu %d MB zusÀtzlicher "
+"Software auf Ihrem Rechner installiert."
-#: ../../printer/data.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
+msgid ""
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
+msgstr ""
+"Sie haben noch keine Schnittstelle eingerichtet.\n"
+"Sie können dies tun, indem Sie die SchaltflÀche \n"
+"„Konfigurieren“ betĂ€tigen."
-#: ../../printer/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "PDQ"
-msgstr "PDQ"
+msgid "Estonian"
+msgstr "Estland"
-#: ../../printer/data.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
+msgid ""
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
+msgstr ""
+"Apache ist ein World-Wide-Web-Server. Mit seiner Hilfe können Sie \n"
+"HTML-Dateien ĂŒber HTTP publizieren. Der Server ist CGI-fĂ€hig."
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Add/Del Clients"
+msgstr "Clients hinzufĂŒgen/löschen"
+
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
+#, c-format
+msgid "Choose the network interface"
+msgstr "WĂ€hlen Sie die Netzwerkkarte"
#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Unknown Model"
msgstr "Unbekanntes Modell"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Unknown model"
-msgstr "Unbekanntes Modell"
+msgid "CD/DVD burners"
+msgstr "CD/DVD-Brenner"
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "%s (Port %s)"
-msgstr "%s (Port %s)"
+msgid ""
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"Partition wird standardmĂ€ĂŸig geladen\n"
+" (fĂŒr MS-DOS Boot, nicht jedoch fĂŒr LILO)\n"
-#: ../../printer/main.pm:1
-#, c-format
-msgid "Host %s"
-msgstr "Rechner %s"
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "choose image"
+msgstr "Abbild-Datei auswÀhlen"
-#: ../../printer/main.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Network %s"
-msgstr "Netzwerk %s"
+msgid "Firewalling configuration detected!"
+msgstr "Ich habe eine Firewall-Konfiguration gefunden!"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Interface \"%s\""
-msgstr "Schnittstelle: „%s“"
+msgid "Connection name"
+msgstr "Name der Verbindung"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Local network(s)"
-msgstr "Lokale Netzwerke"
+msgid ""
+"x coordinate of text box\n"
+"in number of characters"
+msgstr ""
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Raw printer (No driver)"
-msgstr "Rohdaten-Drucker (kein Treiber)"
+msgid "Updating package selection"
+msgstr "Erneuere Paket Auswahl"
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", using command %s"
-msgstr ", mittels Kommando „%s“"
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "Wo wollen Sie die Loopback-Datei %s einhÀngen?"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr "auf dem Novell-Server „%s“, Drucker „%s“"
+msgid ""
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
+msgstr ""
+"Die Diskette wurde erfolgreich erstellt.\n"
+"Sie können die Installation nun automatisch durchfĂŒhren."
-#: ../../printer/main.pm:1
-#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr "auf SMB/Windows-Server „%s“, Freigabe „%s“"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the number of buttons the mouse has"
+msgstr "die Nummer des Prozessors"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP Drucker „%s“, Port %s"
+msgid ""
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
+msgstr ""
+"Bitte geben Sie das Verzeichnis (oder Modul) an,\n"
+" in dem die Archive auf diesem Rechner erstellt werden sollen."
-#: ../../printer/main.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr "auf LDP-Server „%s“, Drucker „%s“"
+msgid "Replay"
+msgstr "Erneut abspielen"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ", printing to %s"
-msgstr ", drucken auf %s"
+msgid "Backup other files"
+msgstr "Andere Dateien sichern"
-#: ../../printer/main.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid ", multi-function device"
-msgstr ", MultifunktionsgerÀt"
+msgid "No floppy drive available"
+msgstr "Kein Disketten-Laufwerk verfĂŒgbar"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", MultifunktionsgerÀt am HP JedDirect"
+msgid "Backup files are corrupted"
+msgstr "Die Sicherungen sind beschÀdigt."
-#: ../../printer/main.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ", multi-function device on USB"
-msgstr ", USB MultifunktionsgerÀt"
+msgid "TV norm:"
+msgstr "Fernsehnorm:"
-#: ../../printer/main.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ", multi-function device on parallel port \\#%s"
-msgstr ", MultifunktionsgerÀt am Parallelport \\#%s"
+msgid "Cpuid family"
+msgstr "CPUID Familie"
-#: ../../printer/main.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ", USB printer"
-msgstr ", USB-Drucker"
+msgid "32 MB"
+msgstr "32 MB"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ", USB printer \\#%s"
-msgstr ", USB-Drucker \\#%s"
+msgid "Lithuanian AZERTY (new)"
+msgstr "Litauen (AZERTY - neu)"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " on parallel port \\#%s"
-msgstr " an Parallelport \\#%s"
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgstr ""
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Local Printers"
-msgstr "Lokale Drucker"
+msgid ""
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
+msgstr ""
+"Sie haben eine Software-RAID-Partition als Verzeichnisbaumwurzel "
+"ausgewÀhlt. \n"
+"Zur Zeit kann kein Betriebssystemstarter damit ohne Verwendung einer \n"
+"„/boot“-Partition arbeiten. Stellen Sie sicher, dass Sie eine solche \n"
+"Partition erstellen."
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Pipe job into a command"
-msgstr "Den Auftrag an ein Kommando weiterleiten"
+msgid "Previous"
+msgstr "<- ZurĂŒck"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Enter a printer device URI"
-msgstr "Druckeranschluss URI"
+msgid "Other OS (MacOS...)"
+msgstr "Anderes Betriebssystem (MacOS ...)"
-#: ../../printer/main.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Printer on NetWare server"
-msgstr "Drucker an NetWare Server"
+msgid "To activate the mouse,"
+msgstr "Um Ihre Maus zu aktivieren:"
-#: ../../printer/main.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Drucker an SMB/Windows 9x/ME/NT"
+msgid "Bringing up the network"
+msgstr "Netzwerkverbindung herstellen"
-#: ../../printer/main.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Netzwerkdrucker (TCP/Socket)"
+msgid "Screenshots will be available after install in %s"
+msgstr "Die Bildschirm-SchnappschĂŒsse liegen nach der Installation unter „%s“"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Printer on remote lpd server"
-msgstr "Drucker an LPD-Server im Netzwerk"
+msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
+msgstr ""
+"Es wurde mehr als eine Windows-Partition gefunden. WĂ€hlen Sie bitte, welche\n"
+"Sie verkleinern wollen, um Platz fĂŒr Ihr neues Mandrake Linux zu schaffen.\n"
+"\n"
+"Die Partitionen werden folgendermaßen aufgelistet: „Linux-Name“,\n"
+"„Windows-Name“, „KapazitĂ€t“.\n"
+"\n"
+"„Linux-Name“ hat folgende Struktur: „Festplattentyp“, „Festplattennummer“,\n"
+"„Partitionsnummer“ (etwa „hda1“).\n"
+"\n"
+"„Festplattentyp“ ist „hd“, falls Ihre Platte eine IDE/ATAPI-Platte ist, und\n"
+"„sd“, wenn es sich um eine SCSI-Platte handelt.\n"
+"\n"
+"„Festplattennummer“ ist immer der Buchstabe hinter dem Festplattentyp. Bei\n"
+"IDE-Platten bedeutet:\n"
+"\n"
+" * „a“ bedeutet „Master-Platte am primĂ€ren IDE-Controller“;\n"
+"\n"
+" * „b“ bedeutet „Slave-Platte am primĂ€ren IDE-Controller“;\n"
+"\n"
+" * „c“ bedeutet „Master-Platte am sekundĂ€ren IDE-Controller“;\n"
+"\n"
+" * „d“ bedeutet „Slave-Platte am sekundĂ€ren IDE-Controller“;\n"
+"\n"
+"Bei SCSI-Platten steht „a“ fĂŒr „niedrigste SCSI-ID“, „b“ fĂŒr\n"
+"„zweitniedrigste SCSI-ID“, etc.\n"
+"\n"
+"„Windows-Name“ ist der Buchstabe, den die Partition unter Windows erhalten\n"
+"wĂŒrde (die erste Partition der ersten Platte heißt „C:“)."
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Drucker an CUPS-Server auf der Gegenseite"
+msgid "Tanzania"
+msgstr "Tansania"
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Remote printer"
-msgstr "Entfernter Drucker"
+msgid "Computing FAT filesystem bounds"
+msgstr "Errechne die Grenzen des FAT Dateisystems"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Local printer"
-msgstr "Lokaler Drucker"
+msgid ""
+"\n"
+"Backup Sources: \n"
+msgstr ""
+"\n"
+"Sicherungsquellen: \n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Configuring applications..."
-msgstr "Anwendungen konfigurieren ..."
+msgid "Content of the file"
+msgstr "Inhalt der LogbĂŒcher"
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printerdrake"
-msgstr "PrinterDrake"
+msgid "Authentication LDAP"
+msgstr "LDAP Authentifizierung"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Drucker „%s“ entfernen ..."
+msgid "Let me pick any driver"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Möchten Sie den Drucker „%s“ wirklich entfernen?"
+msgid "Profile "
+msgstr "Profil "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Remove printer"
-msgstr "Drucker entfernen"
+msgid "transmitted"
+msgstr "Gesendet"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Learn how to use this printer"
-msgstr "Wie dieser Drucker genutzt werden kann"
+msgid "Palestine"
+msgstr "PalÀstina"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Print test pages"
-msgstr "Testseite(n) drucken"
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
-msgstr "Fehler beim Entfernen von „%s“ fĂŒr StarOffice/OpenOffice.org/GIMP."
+msgid "%d comma separated strings"
+msgstr "%d durch Kommas getrennte Textfelder"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
-msgstr ""
-"Der Drucker „%s“ wurde erfogrich fĂŒr StarOffice/OpenOffice.org/GIMP entfernt."
+msgid "Here is the full list of keyboards available"
+msgstr "Hier die Liste aller Tastaturen"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Drucker fĂŒr StarOffice/OpenOffice.org/GIMP entfernen"
+msgid "Theme name"
+msgstr "Themenname"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Diesen Drucker fĂŒr StarOffice/OpenOffice.org/GIMP entfernen"
+msgid "/_Help"
+msgstr "/_Hilfe"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr "Fehler beim HinzufĂŒgen von „%s“ fĂŒr StarOffice/OpenOffice.org/GIMP."
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid ""
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
+"Hier können Sie einstellen, ob die Drucker, die an diesem Rechner hÀngen, "
+"fĂŒr andere Rechner nutzbar sein sollen und falls ja, fĂŒr welche."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgid "the width of the progress bar"
msgstr ""
-"Der Drucker „%s“ wurde erfogrich zu StarOffice/OpenOffice.org/GIMP "
-"hinzugefĂŒgt."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Drucker fĂŒr StarOffice/OpenOffice.org/GIMP hinzufĂŒgen"
+msgid "Cook Islands"
+msgstr "Cook-Inseln"
-#: ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Diesen Drucker fĂŒr StarOffice/OpenOffice.org/GIMP hinzufĂŒgen"
+msgid "Formatting partition %s"
+msgstr "Formatiere Partition „%s“"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Der Drucker „%s“ ist jetzt Ihr Standarddrucker“"
+msgid "Hostname required"
+msgstr "Rechnername nötig"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Default printer"
-msgstr "Standarddrucker"
+msgid "Unselect fonts installed"
+msgstr "Auswahl installierter Schriften zurĂŒcksetzen"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Set this printer as the default"
-msgstr "Als Standarddrucker verwenden"
+msgid "Cancel"
+msgstr " Abbruch "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Printer options"
-msgstr "Drucker-Optionen"
+msgid "Searching for configured scanners ..."
+msgstr "Suche nach eingerichteten Scannern ..."
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Printer manufacturer, model"
-msgstr "Druckerproduzent, Modell"
+msgid "Wheel"
+msgstr "Rad"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "Druckerproduzent, Modell, Treiber"
+msgid "Videocard"
+msgstr "Videokarten"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Alten Drucker „%s“ entfernen ..."
+msgid "\tBackups use tar and bzip2\n"
+msgstr "\tSicherungen verwenden „tar“ und „bzip2“\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "Printer name, description, location"
-msgstr "Druckername, Beschreibung, Standort"
+msgid "Remove Selected"
+msgstr "Markierte entfernen"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Printer connection type"
-msgstr "Art der Druckeranbindung"
+msgid "/Autodetect _modems"
+msgstr "/_Modems automatisch erkennen"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Raw printer"
-msgstr "Rohdaten-Drucker"
+msgid "Remove printer"
+msgstr "Drucker entfernen"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Do it!"
-msgstr "AusfĂŒhren!"
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
+msgstr ""
+"WARNUNG!\n"
+"\n"
+"DrakX wird nun die GrĂ¶ĂŸe Ihrer Windows Partition verĂ€ndern.\n"
+"Seien Sie Vorsichtig: Diese Aktion ist gefÀhrlich. Falls Sie es noch\n"
+"nicht getan haben, sollten Sie nun die Installation abbrechen, um\n"
+"scandisk (sowie möglicherweise defrag) unter Windows auf die Partition \n"
+"anzuwenden. Anschließend können Sie die Installation erneut starten.\n"
+"Sie sollten natĂŒrlich generell Sicherheitskopien Ihrer Daten angelegt\n"
+"haben. Falls dies der Fall ist, können Sie mit OK fortfahren."
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Close"
-msgstr "Schließen"
+msgid "Which services would you like to allow the Internet to connect to?"
+msgstr "Auf welche Dienste daf aus dem Internet zugegeriffenwerden?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
msgstr ""
-"Drucker %s\n"
-"Was wollen Sie an diesem Drucker Àndern?"
+"Herzlich willkommen zum E-Mail Benachrichtigungsassistenten.\n"
+"\n"
+"Hier können Sie Ihr Benachrichtigungssystem einrichten.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Modify printer configuration"
-msgstr "Drucker-Konfiguration Àndern"
+msgid "Other"
+msgstr "Andere"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
-msgid "Add a new printer"
-msgstr "Drucker hinzufĂŒgen"
+msgid "Default"
+msgstr "Standard"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Normal Mode"
-msgstr "Normaler Modus"
+msgid "Button 2 Emulation"
+msgstr "Emulation der 2. Taste"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Change the printing system"
-msgstr "Drucksystem Àndern"
+msgid "type1inst building"
+msgstr "Erzeuge „type1inst“"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "CUPS configuration"
-msgstr "CUPS Konfiguration"
+msgid "Abiword"
+msgstr "Abiword"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr "Aktualisiere Druckerliste (um alle entfernten CUPS-Drucker anzuzeigen)"
+msgid "choose image file"
+msgstr "Abbild-Datei auswÀhlen"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr "Anzeigen aller entfernten CUPS-Drucker"
+msgid "X server"
+msgstr "X Server"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Die folgenden Drucker sind bereits eingerichtet. FĂŒhren Sie einen "
-"Doppelklick auf einem aus, um ihn zu Àndern, als Standarddrucker zu "
-"verwenden oder Informtionen ĂŒber ihn zu erhalten."
+msgid "Domain Admin User Name"
+msgstr "Name des DomÀnenadministrators"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Printing system: "
-msgstr "Drucksystem: "
+msgid "There was an error while scanning for TV channels"
+msgstr "Bei der Suche der TV-KanÀle trat ein Fehler auf"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Checking installed software..."
-msgstr "Suche nach installierter Software"
+msgid "US keyboard (international)"
+msgstr "Vereinigte Staaten von Amerika (international)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Installing Foomatic..."
-msgstr "Installieren des Pakets Foomatic ..."
+msgid "Not installed"
+msgstr "Nicht installiert"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "Konnte Drucker \"%s\" nicht konfigurieren!"
+msgid "LAN connection"
+msgstr "LAN Verbindung"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Drucker „%s“ konfigurieren ..."
+msgid "/File/-"
+msgstr "/Datei/-"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Reading printer data..."
-msgstr "Lesen der Treiber-Datenbank ..."
+msgid "Italian"
+msgstr "Italien"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Welches Drucksystem (Spooler) wollen Sie verwenden?"
+msgid "Basic"
+msgstr "Einfach"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Select Printer Spooler"
-msgstr "WĂ€hlen Sie das Drucksystem"
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Setting Default Printer..."
-msgstr "Standarddrucker wÀhlen ..."
+msgid "Honduras"
+msgstr "Honduras"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Installing %s ..."
-msgstr "Installiere %s ..."
+msgid "pdq"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Removing %s ..."
-msgstr "Entferne %s ..."
+msgid "Card IO"
+msgstr "Karten E/A"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
+msgid "when checked, owner and group won't be changed"
msgstr ""
-"Das Drucksystem (%s) wird nicht automatisch beim Betriebssystemstart "
-"aktiviert.\n"
-"Es ist möglich, dass der Start durch den Wechsel in eine höhere "
-"Sicherheitsebene deaktiviert wurde, da das Drucksystem einen potentienllen "
-"Angriffspunkt darstellt.\n"
-"\n"
-"Wollen sie den automatischen Start des Drucksystems wieder herstellen?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Drucksystem beim BS-Start aktivieren"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
msgstr ""
-"Sie sind dabei das Drucksystem %s auf einem Rechner mit Sicherheitsebene %s "
-"zu installieren.\n"
"\n"
-"Dieses Drucksystem lÀuft als DÀmon (Hintergrundprozess), der auf "
-"DruckauftrĂ€ge wartet, um sie abzuarbeiten. Da der DĂ€mon auch fĂŒr andere "
-"Rechner Ihres Netzwerks erreichbar ist,schaffen Sie damit einen möglichen "
-"Angriffspunkt. Aus SicherheitsgrĂŒnden werden in dieser Sicherheitsebene "
-"standardmĂ€ĂŸig nur einige ausgewĂ€hlte DĂ€mons gestartet.\n"
-"\n"
-"Wollen Sie wirklich dieses Drucksystem auf diesem Rechner installieren?"
+"Diese spezielle Start-Partition\n"
+"ist fĂŒr die Verwendung mehrerer\n"
+"Betriebssysteme auf dem selben\n"
+"Rechner.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Installation eines Drucksystems in Sicherheitsebene %s"
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
+msgstr ""
+"Bitte wĂ€hlen Sie fĂŒr jeden Schritt, ob er wie bei Ihrer Installation "
+"vorgenommen werden soll, oder ob Sie ihn manuell durchfĂŒhren wollen."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
+msgstr ""
+"Sie können hier entscheiden, ob Drucker von anderen Rechnern automatisch auf "
+"diesem Rechner zur VerfĂŒgung gestellt werden sollen."
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "paranoid"
-msgstr "Paranoid"
+msgid "\t-Network by FTP.\n"
+msgstr "\t- Netzwerk per FTP.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "high"
-msgstr "Hoch"
+msgid "Russian (Yawerty)"
+msgstr "Russland (YaWERTY)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Restarting printing system..."
-msgstr "Drucksystem neu starten ..."
+msgid "You must enter a device or file name!"
+msgstr "Sie mĂŒssen einen GerĂ€te- oder Dateinamen eingeben!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Configuration of a remote printer"
-msgstr "Konfiguration eines entfernten Druckers"
+msgid "/_Quit"
+msgstr "/_Beenden"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
msgstr ""
-"Es wurde kein aktives Netzwerk gefunden und es konnte auch keine "
-"Netzwerkverbindung hergestellt werden. Kontrollieren Sie bitte Ihre Hardware "
-"und Ihre Softwareeinstellngen. Versuchen Sie anschließend erneut den "
-"entfernten Drucker einzurichten."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Graphics memory: %s kB\n"
+msgstr "Grafikkartenspeicher: %s KB\n"
+
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
msgstr ""
-"Das von Ihnen wÀhrend der Installation eingerichtete Netzwerk kann jetzt "
-"nicht gestartet werden. Testen Sie bitte, ob es nach einem Neustart zur "
-"VerfĂŒgung steht. Falls nicht, berichtigen Sie die Einstellungen im Mandrake "
-"Kontrollzentrum unter „Netzwerk & Internet/Verbindung“. Versuchen Sie "
-"anschließend erneut den Drucker mittels „Hardware/Drucker“im Kontrollzentrum "
-"einzurichten."
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Configure the network now"
-msgstr "Netzwerk jetzt konfigurieren"
+msgid "access to compilation tools"
+msgstr "Zugriff auf Compiler"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Go on without configuring the network"
-msgstr "Weiter ohne Netzwerkkonfiguration"
+msgid "Please select data to restore..."
+msgstr "Bitte wÀhlen Sie die wiederherzustellenden Daten..."
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
msgstr ""
-"Sie wollen einen entfernten Drucker einrichten. Sie benötigen dafĂŒr ein "
-"funktionerendes Netzwerk, aber Ihr Netzwerk ist noch nicht eingerichtet. "
-"Sollten Sie dennoch fortfahren, ohne Ihr Netzwerk einzurichten, ist der "
-"Drucker hinterher nicht zu verwenden. Wie wollen Sie fortfahren?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Network functionality not configured"
-msgstr "Ihr Netzwerk ist nicht konfiguriert"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Starting network..."
-msgstr "Netzwerk starten ..."
+"Wenn Sie aboot verwenden wollen, mĂŒssen Sie ausreichend Platz am Anfang \n"
+"der Platte lassen (2048 Sektoren reichen aus)."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Refreshing printer data..."
-msgstr "Aktualisieren der Druckerdaten ..."
+msgid "Standard test page"
+msgstr "Standard-Testseite"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Sie haben Ihren alten Standarddrucker („%s“) ĂŒbertragen, soll es auch Ihr "
-"Standarddrucker unter dem neuen Drucksystem „%s“ werden?"
+msgid "Create"
+msgstr "Erzeugen"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Transfer printer configuration"
-msgstr "Drucker-Einstellung transferieren"
+msgid "What"
+msgstr "Was"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Transferring %s..."
-msgstr "Übertragen von „%s“ ..."
+msgid "There was an error ordering packages:"
+msgstr "Bei der Anforderung folgender Pakete trat ein Fehler auf:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "New printer name"
-msgstr "Neuer Druckername"
+msgid "Bulgarian (BDS)"
+msgstr "Bulgarien (BDS)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Der Drucker „%s“ existiert bereits. Wollen Sie ihn wirklich \n"
-"ersetzen?"
+msgid "Disable Server"
+msgstr "Server deaktivieren"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Druckernamen sollten nur Buchstaben, Ziffern und den Unterstrich unterhalten"
+msgid "Filesystem encryption key"
+msgstr "Dateisystem-SchlĂŒssel"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Transfer"
-msgstr "Übertragen"
+msgid "Gujarati"
+msgstr "Indien (Gujarati)"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
msgstr ""
-"Es existiert bereits ein Drucker mit Namen „%s“ unter %s.\n"
-"Durch betĂ€tigen der SchaltfĂ€che „Übertragen“ können Sie ihn\n"
-"ĂŒberschreiben. Sie können dem Drucker auch einen neuen \n"
-"Namen geben oder ihn einfach ĂŒberspringen."
+"Bitte wÀhlen Sie die Nummer aus dem Bereich, die Sie bearbeiten wollen,\n"
+"oder betÀgen Sie die Eingabetaste um fort zu fahren.Ihre Wahl? "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Do not transfer printers"
-msgstr "Druckerdaten nicht ĂŒbertragen"
+msgid "Save theme"
+msgstr "Thema abspeichern"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Markieren Sie die Druckerwarteschlangen, die sie ĂŒbertragen wollen und "
-"betĂ€tigen Sie die SchaltflĂ€che „Übertragen“."
+msgid "group"
+msgstr "Gruppe"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Drucker, die mit den PPD-Dateien ihrer Hersteller oder CUPS-spezifischen "
-"Treibern eingerichtet wurden, können nicht ĂŒbertragen werden."
+msgid "Brazil"
+msgstr "Brasilien"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Warteschlangen, die nicht mit diesem Programm oder „foomatic-configure“ "
-"ertellt wurden, können nicht ĂŒbertragen werden."
+msgid "Auto Install"
+msgstr "Auto-Installation"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD und LPRng unterstĂŒkeine IPP Drucker.\n"
+msgid "Network Configuration Wizard"
+msgstr "Netzwerk Konfigurationsassistent"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ unterstĂŒtzt nur lokale Drucker, entfernte LPD Drucker und Socket/TCP "
-"Drucker.\n"
+msgid "Removable media automounting"
+msgstr "Wechselmedien automatisch EinhÀngen"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS unterstĂŒtzt keine Druker an Novel Servern oder Drucker, die ihre Daten "
-"in ein frei gewÀhltes Kommando senden.\n"
+msgid "Printing"
+msgstr "Drucken"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Sie können die Druckerkonfiguration, die Sie fĂŒr den Spooler „%s“ "
-"vorgenommen haben fĂŒr „%s“, ihren aktuellen Spooler, verwenden. Alle Daten "
-"(Name, Beschreibung, Standort, Verbindungsart und standard "
-"Optionseinstellungen) werden ĂŒbernommen, Druckjobs in der alten "
-"Warteschlange gehen jedoch verloren.\n"
-"Nicht alle Warteschlangen können ĂŒbernommen werden:\n"
+msgid "Unkown driver"
+msgstr "Unbekannter Treiber"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-"Ihr Drucker wurde automatisch so konfiguriert, dass Sie von Ihrem Rechner "
-"auf die Foto-Speicherkartenlaufwerke zugreifen können. Sie können jetzt "
-"entweder mit dem grafischen Programm MToolsFM (Menu: \"Programme\" -> "
-"\"Dateiwerkzeuge\" -> \"MTools File Manager\") oder auf der Kommandozeile "
-"mit den mtools (FĂŒr mehr Information geben Sie \"man mtools\" auf der "
-"Kommandozeile ein) auf die eingelegte Karte zugreifen. Sie finden das "
-"Dateisystem der Karte unter dem Laufwerksbuchstaben \"p:\" oder, wenn Sie "
-"mehr als einen HP-Drucker mit Foto-Speicherkartenlaufwerken haben, unter den "
-"nachfolgenden Buchstaben. In MToolsFM können Sie zwischen den "
-"Laufwerksbuchstaben mit dem Feld ĂŒber der oberen rechten Ecke der Dateiliste "
-"umschalten."
+"There are no printers found which are directly connected to your machine"
+msgstr "Ich konnte keine Drucker direkt an Ihrem Rechner finden."
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Ihr MultifunktionsgerÀt wurde automatisch auch zum Scannen eingerichtet. Sie "
-"können nun mit dem Befehl „scanimage“ („scanimage -d hp:%s“ um den Scanner "
-"auszuwÀhlen, falls Sie mehrere angeschlossen haben), eingegeben in der "
-"Kommandozeile, scannen. Wenn Sie eine grafisches Werkzeug verwenden wollen: "
-"„xscanimage“ bzw. „xsane“. Sie können auch den GIMP verwenden. WĂ€hlen Sie "
-"einfach im MenĂŒ „Datei/Holen“ den entsprechenden Eintrag. Sie können sich "
-"auch mittels „man scanimage“ bzw „man sane-hp“ in der Kommandozeile weitere "
-"Informationen ausgeben lassen.\n"
-"\n"
-"Verwenden Sie fĂŒr dieses GerĂ€t nicht „ScannerDrake“!"
+msgid "Create a new partition"
+msgstr "Erzeuge eine neue Partition"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Printing test page(s)..."
-msgstr "Druck der Testseite(n) ..."
+msgid "Driver:"
+msgstr "Treiber:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Print option list"
-msgstr "Liste der Drucker-Optionen"
+msgid "unknown"
+msgstr "Unbekannt"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Drucken auf Drucker „%s“"
+msgid "Use fdisk"
+msgstr "Fdisk verwenden"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Drucken/Fotokartenzugriff mit „%s“"
+msgid "MOVE YOUR WHEEL!"
+msgstr "BEWEGEN SIE IHR MAUS-RAD!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Drucken/Scannen mit „%s“"
+msgid "sent: "
+msgstr "Gesendet: "
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Drucken/Scannen/Fotokarten mit „%s“"
+msgid "Automatic IP"
+msgstr "Automatische IP-Adressen Zuweisung"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
+#, c-format
msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
"\n"
-msgstr ""
-"Um alle existierenden Optionen des Druckers zu erfahren, lesen Sie entweder "
-"die unten angegebene Liste oder betĂ€tigen Sie die SchaltflĂ€che „Liste der "
-"Drucker-Optionen“. %s%s\n"
+"The \"%s\" button shows two more buttons to:\n"
"\n"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
+" Note that two different options are available after clicking the button:\n"
+"\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
msgstr ""
+"Nun ist es soweit, die Installation ist abgeschlossen und Ihr neues\n"
+"Betriebssystem sollte einsatzbereit sein. Bei einem Neustart können Sie\n"
+"zwischen den auf Ihrer Platte installierten Betriebssystemen auswÀhlen.\n"
+"Klicken Sie nur noch auf „%s“ und das System wird neu gestartet.\n"
"\n"
-"Die Befehle „%s“ und „%s“ erlauben es Ihnen ebenfals die Optionen eines "
-"spezeiellen Druckjobs zu konfigurieren. FĂŒgen Sie einfach die gewĂŒnschten "
-"Einstellungen in der Kommandozeile ein, etwa „%s <Datei>“.\n"
+"Die SchaltflĂ€che „%s“ liefert zwei weitere SchaltflĂ€chen:\n"
+"\n"
+" * „%s“: Hiermit können Sie eine Installationsdiskette erstellen, mit deren\n"
+"Hilfe Sie eine identische automatische Installation ohne Interaktion eines\n"
+"Administrators durchzufĂŒhren können.\n"
+"\n"
+" Es gibt zwei verschiedene Alternativen, nachdem Sie diese SchaltflÀche\n"
+"aktiviert haben:\n"
+"\n"
+" * „%s“: Diese Installation ist nur teilweise automatisch, da der\n"
+"Partitionierungsschritt (aber nur dieser!) immer noch interaktiv vonstatten\n"
+"geht.\n"
+"\n"
+" * „%s“: Vollautomatische Installation: Die Festplatte wird vollstĂ€ndig\n"
+"reorganisiert. Alle darauf vorhandenen Daten gehen verloren!\n"
+"\n"
+" Diese Funktion ist besonders nĂŒtzlich, wenn man eine Menge von\n"
+"identischer Rechner einrichten will. Weitere Informationen erhalten Sie\n"
+"auch auf der Seite Auto install\n"
+"\n"
+" * „%s“:(*) Sie speichern damit die Paketauswahl, die Sie vorher getroffen\n"
+"haben. Wenn Sie spÀter eine erneute Installation vornehmen wollen, legen\n"
+"Sie einfach die Diskette ins Laufwerk und starten Sie die Installation\n"
+"mittels [F1] an der ersten Eingabeaufforderung. Geben Sie dann »linux\n"
+"defcfg=\"floppy\"« ein.\n"
+"\n"
+"(*) Sie benötigen eine FAT formatierte Diskette (Mittels „mformat a:“\n"
+"können Sie unter GNU/Linux eine solche erstellen)."
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Sie können auch das Grafikwerkzeug „xpdq“ zum setzen der Optionen und "
-"Verwalten der Druckjobs verwenden.\n"
-"Falls Sie KDE als ArbeitsoberflÀche nutzen, haben Sie eine Panik-Abschaltung "
-"in Forma des ArbeitsflĂ€chensymbols „STOP Printer!“, dass sofort alle "
-"DruckauftrÀge anhÀ, wenn Sie es betÀgen. Das kann beispielsweise dann "
-"hilfreich sein, wenn Sie einen Papierstau in Ihrem Drucker haben.\n"
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Maus"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Sie können diesen Befehl auch im „Druckkommando“-Feld vieler Programme "
-"angeben. Tragen Sie bitte keinen Dateinamen ein, da dieser vom Programm "
-"ergÀnzt wird.\n"
+msgid "Configuration of a remote printer"
+msgstr "Konfiguration eines entfernten Druckers"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Verwenden Sie einen der Befehle „%s <Datei>“ oder „%s <Datei>“, um die Datei "
-"<Datei> in der Kommandozeile auszudrucken.\n"
+msgid "Moldova"
+msgstr "Moldawien"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Um eine Liste der Drucker-Parameter Ihres Druckers zu erhalten, betÀtigen "
-"Sie bitte die SchaltflĂ€che „Liste der Drucker-Optionen“."
+msgid "Please check if you want to erase your tape before the backup."
+msgstr "Geben Sie an, ob sie Ihr Band vor dem Backup löschen wollen."
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
+msgid "An online platform to respond to enterprise support needs."
msgstr ""
-"\n"
-"Der Befehl „%s“ erlaubt es Ihnen auch zahlreiche Einstellungen fĂŒr einen "
-"bestimmten Druckauftrag zu Ă€ndern. Geben Sie die gewĂŒnschten Angaben einfach "
-"in der Kommandozeile mit an, etwa: „%s <Datei>“. "
+"Eine Online-Plattform, die speziell auf die BedĂŒrfnisse von Firmenkunden "
+"zugeschnitten wurde."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Verwenden Sie den Befehl „%s <Datei>“, um die Datei <Datei> in der "
-"Kommandozeile auszudrucken.\n"
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "Die URL muss mit „http://“ oder „ftp://“ beginnen"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Hier die Liste vorhandener Drucker-Parameter des aktuellen Druckers:\n"
-"\n"
+msgid "Add a new rule at the end"
+msgstr "Neue Regel am Ende hinzufĂŒgen"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
msgstr ""
-"Sie können diese Befehle auch in der „Druck-Kommando“-Zeile des Druckdialogs "
-"zahlreicher Anwendungen angeben, lassen Sie jedoch den Dateinamen weg, da "
-"die zu druckende Datei von der Anwendung geliefert wird.\n"
+"Sie können hier entscheiden, ob Drucker von anderen Rechnern automatisch auf "
+"diesem Rechner zur VerfĂŒgung gestellt werden sollen."
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
msgstr ""
-"Sie können sowohl den Befehl „%s <datei>“ verwenden, wenn Sie in einer "
-"Konsole die Datei „<datei>“ drucken wollen, als auch ein grafisches "
-"Hilfsprogramm verwenden: „xpp <datei>“ oder „kprinter <datei>“. Die "
-"grafischen Hilfsprogramme erlauben Ihnen auf einfache Weise den richtigen "
-"Drucker zu wÀhlen und die notwendigen Druckerparameter anzugeben.\n"
+"Sie mĂŒssen nun die Optionen fĂŒr Modul %s angeben.\n"
+"Optionen haben die Form „name=wert name2=wert2“.\n"
+"Beispielsweise: „io=0x300 irq=7“"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Did it work properly?"
-msgstr "War der Ausdruck korrekt?"
+msgid "Quit without writing the partition table?"
+msgstr "Beenden ohne die Partitionstabelle zu speichern?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Die Testseite(n) wurden an den Drucker gesandt.\n"
-"Es kann einen Augenblick dauern, bevor der Drucker seine Arbeit aufnimmt.\n"
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Die Testseite(n) wurden an den Drucker gesandt.\n"
-"Es kann einen Augenblick dauern, bevor der Drucker seine Arbeit aufnimmt.\n"
-"Druckstatus:\n"
-"%s\n"
-"\n"
+msgid "Installing packages..."
+msgstr "Pakete Installieren ..."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do not print any test page"
-msgstr "Keine Testseite(n) drucken"
+msgid "Dutch"
+msgstr "Niederlande"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Photo test page"
-msgstr "Foto-Testseite"
+msgid "The following packages need to be installed:\n"
+msgstr "Die folgenden Pakete mĂŒssen installiert werden:\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Alternative test page (A4)"
-msgstr "Alternative Testseite (A4)"
+msgid "Angola"
+msgstr "Angola"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "Alternative Testseite (US-Format - „Letter“)"
+msgid "service setting"
+msgstr "Dienste einstellen"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Standard test page"
-msgstr "Standard-Testseite"
+msgid "Custom"
+msgstr "Benutzerdefiniert"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Print"
-msgstr "Drucken"
+msgid "File is already used by another loopback, choose another one"
+msgstr ""
+"Diese Datei wird bereits von einer anderen Loopback-VerknĂŒpfung verwendet, "
+"wÀhlen Sie eine andere Datei."
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No test pages"
-msgstr "Keine Testseiten"
+msgid "Read-only"
+msgstr "Nur lesbar"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Latvia"
+msgstr "Litauen"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "No known driver"
+msgstr "Kein bekannter Treiber"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "1 MB"
+msgstr "1 MB"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
msgstr ""
-"Bitte wÀhlen Sie, welche Testseiten Sie drucken wollen.\n"
+"Falls das nicht der Drucker ist, den Sie einrichten wollen, geben Sie einen "
+"GerÀte- oder Dateinamen in der Eingabezeile an."
+
+#: ../../standalone/draksound:1
+#, c-format
+msgid ""
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
"\n"
-"Bemerkung: Der Druck der Foto-Testseite dauert hÀufig extrem lange. Bei "
-"Laserdruckern mit wenig Speicher kann es auch vorkommen, dass sie gar nicht "
-"gedruckt wird. Normalerweise sollte es ausreichen, die Standard-Testseiten "
-"auszudrucken."
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Test pages"
-msgstr "Testseiten"
+msgid "Configure Local Area Network..."
+msgstr "Netzwerk konfigurieren"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Möchten Sie diesen Drucker („%s“)\n"
-"als Standarddrucker verwenden?"
+msgid "Launch the sound system on your machine"
+msgstr "Starten des Sound-Systems Ihres Rechners"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Option %s out of range!"
-msgstr "Der Parameter %s ist yu groß oder zu klein!"
+msgid "Preparing printer database..."
+msgstr "Vorbereiten der Drucker-Datenbank ..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Option %s must be a number!"
-msgstr "Der Parameter %s muss eine Zahl sein!"
+msgid "Information"
+msgstr "Informationen"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Der Parameter %s muss eine Zahl sein!"
+msgid "No network card"
+msgstr "Keine Netzwerkkarte"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer default settings"
-msgstr "Auswahl des Druckertyps"
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#, c-format
+msgid "Which filesystem do you want?"
+msgstr "Welches Dateisystem wollen Sie verwenden?"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "3 buttons"
+msgstr "3 Tasten"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Detailed information"
+msgstr "AusfĂŒhrliche Informationen"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Malta"
+msgstr "Malta"
#: ../../printer/printerdrake.pm:1
#, c-format
@@ -11901,506 +10882,421 @@ msgstr ""
"richtig eingestellt sind. Es sei auch angemerkt, dass hÀufig mit steigender "
"DruckqualitÀt die Druckgeschwindigkeit sinkt."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr ""
+msgid "This floppy is not FAT formatted"
+msgstr "Diese Diskette ist nich FAT formatiert"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
-msgstr ""
-"Um mit Ihrem Lexmark-Tintenstrahldrucker drucken zu können, benötigen Sie "
-"die Treiber, die von Lexmark bereitgestellt werden (http://www.lexmark."
-"com/). Klicken Sie auf den „Drivers“-Link. WĂ€hlen Sie dann das Druckermodell "
-"und geben Sie „Linux“ als Betriebssystem an. Sie erhalten die Treiber als "
-"RPM-Paket oder als Shellskript mit interaktiver grafischer Installation. Sie "
-"mĂŒssen die Einrichtung nicht mit dem Lexmark-Klicktool vornehmen. Sie können "
-"direkt nach der Lizenz auf „Abbruch“ drĂŒcken. Drucken Sie dann die Druckkopf-"
-"Justierungsseiten mit „lexmarkmaintain“ und justieren Sie damit den "
-"Druckkopf."
+msgid "Configuring network"
+msgstr "Netzwerk konfigurieren"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark Tintenstrahl-Konfiguration"
+msgid "Graphic Card"
+msgstr "Grafikkarte"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Resizing Windows partition"
+msgstr "Errechne die Grenzen des Windows Dateisystems"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Provider dns 1 (optional)"
+msgstr "Erster DNS des Providers (optional)"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Cameroon"
+msgstr "Kamerun"
+
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
msgstr ""
-"Der Lexmark Tintenstrahl-Druckertriber unterstĂŒtzt nur lokale Drucker, keine "
-"Drucker auf entfernten Rechnern oder an Printserver-Boxen. Bitte schließen "
-"Sie den Druker direkt an Ihren Rechner oder richten Sie ihn auf dem Rechner "
-"ein, an den er angeschlossen ist."
+"Sie können nun %s partitionieren.\n"
+"Vergessen Sie nicht die Einstellungen mittels ,w` zu speichern, \n"
+"sobald Sie fertig sind."
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
#, c-format
+msgid "Close"
+msgstr "Schließen"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
msgstr ""
-"Sie versuchen, eine OKI Win-Laserdrucker einzurichten. Da diese Drucker ein "
-"sehr eigenwilliges Protokol verwenden, funktionieren sie nur, wenn sie am "
-"ersten Parallelport angeschlossen sind. Sollte Ihr Druker an einer anderen "
-"Schnittstelle oder an einer Printserver-Box hĂ€ngen, schließen Sie ihn bitte "
-"an den ersten Parallelport, bevor Sie versuchen eine Testseite zu drucken ..."
+"„%s“: „%s“: Kontrollieren Sie, ob die Auswahl des Staates, in dem Sie sich\n"
+"befinden korrekt ist. Falls nicht, betÀtigen Sie bitte die SchaltflÀche\n"
+"„%s“ und wĂ€hlen Sie den richtigen. Ist Ihr Staat nicht in der Liste, die\n"
+"Sie gezeigt bekommen, können Sie ĂŒber die SchaltflĂ€che „%s“ eine\n"
+"vollstÀndigere Liste erzwingen."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "OKI winprinter configuration"
-msgstr "OKI Win-Drucker Konfiguration"
+msgid "Calendar"
+msgstr "Kalender"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
+"Restore Selected\n"
+"Catalog Entry"
msgstr ""
-"Falls Ihr Drucker nicht aufgefĂŒhrt ist wĂ€hlen Sie bitte ein kompatibles bzw "
-"Ă€hnliches Modell (FĂŒr Einzelheiten schauen Sie bitte in Ihr Druckerhandbuch)."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
msgstr ""
-"\n"
-"\n"
-"Kontrollieren Sie bitte, ob PrinterDrake Ihern Drucker korrekt erkannt hat. "
-"Falls die Markierung auf einem falschen GerĂ€t oder auf „Rohdaten-Drucker“ "
-"steht, suchen Sie bitte selbst Ihren Drucker in der Liste."
+"Um einen LPD-Drucker im Netzwerk zu verwenden, mĂŒssen Sie den Rechnernamen "
+"des Drucker-Servers sowie den Druckernamen auf diesem Server angeben, an den "
+"die AuftrĂ€ge ĂŒbertragen werden sollen."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which printer model do you have?"
-msgstr "Über welchen Druckertyp verfĂŒgen Sie?"
+msgid "Iceland"
+msgstr "Island"
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Printer model selection"
-msgstr "Auswahl des Druckertyps"
+msgid "consolehelper missing"
+msgstr "Das Programm „consolehelper“ wurde nicht gefunden."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Reading printer database..."
-msgstr "Lesen der Drucker-Datenbank ..."
+msgid "stopped"
+msgstr "gestoppt"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Select model manually"
-msgstr "Modell auswÀhlen"
+msgid "Whether the FPU has an irq vector"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "The model is correct"
-msgstr "Das Modell ist richtig"
+msgid "Ext2"
+msgstr "Ext2"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#, c-format
+msgid "Expand Tree"
+msgstr "Baum erweitern"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
+"The old \"%s\" driver is blacklisted.\n"
"\n"
-"For your printer Printerdrake has found:\n"
+"It has been reported to oops the kernel on unloading.\n"
"\n"
-"%s"
+"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-"PrinterDrake hat den Modellnamen der Selbsterkennung mit den Modellen in der "
-"Datenbank verglichen, um den besten Treiber zu finden. Die Auswahl kann "
-"jedoch falsch sein, etwa wenn Ihr Drucker nicht in der Datenbank vorhanden "
-"ist. Kontrollieren Sie, ob die Wahl korrekt ist und wÀhlen Sie die "
-"SchaltflĂ€che „Das Modell ist richtig“, wenn der Treiber Ihren WĂŒn "
-"entspricht, andernfalls betĂ€gen Sie „Modell auswĂ€hlen“, um die Auswahl "
-"selbst vorzunehmen.\n"
-"\n"
-"Folgender Drucker wurde gefunden:\n"
-"\n"
-"%s"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Your printer model"
-msgstr "Ihr Druckermodell"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Preparing printer database..."
-msgstr "Vorbereiten der Drucker-Datenbank ..."
+msgid "Expert Mode"
+msgstr "Expertenmodus"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Location"
-msgstr "Standort"
+msgid "Printer options"
+msgstr "Drucker-Optionen"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Description"
-msgstr "Beschreibung"
+msgid "Local Network adress"
+msgstr "Lokale Netzwerkadresse"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Name of printer"
-msgstr "Druckername"
+msgid "Backup your System files. (/etc directory)"
+msgstr "Sichern Ihrer Systemdateien (Verzeicnis /etc)."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
+"\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
+"\n"
+"Do you want to install the updates ?"
msgstr ""
-"Jeder Drucker benötigt einen Namen (etwa „Drucker“).\n"
-"Beschreibung und Standort mĂŒssen nicht ausgefĂŒllt werden.\n"
-"Sie dienen nur als Kommentare fĂŒr den Anwender."
+"Sie haben nun die Möglichkeit Pakete zu installieren, die seit Erscheinen\n"
+"der Distribution aktualisiert wurden. Es handelt sich um \n"
+"Sicherheitsaktualisierungen und Fehlerkorrekturen.\n"
+"\n"
+"Allerdings benötigen Sie dafĂŒr eine funktionierende Internertverbindung.\n"
+"\n"
+"Möchten Sie die Aktualisierungen vornehmen?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr ""
+msgid "Samba Server"
+msgstr "Samba Server"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Making printer port available for CUPS..."
+msgid ""
+"Arguments: (arg, alert=1)\n"
+"\n"
+"Enable/Disable IP spoofing protection."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Checking device and configuring HPOJ..."
+msgid "Australian Optus cable TV"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
#, c-format
-msgid "Photo memory card access on your HP multi-function device"
+msgid ""
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
msgstr ""
+" <Tab>/<Alt-Tab> nÀchstes Element | <Leertaste> auswÀhlen | <F12> weiter "
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr "Scannen auf Ihrem HP MultifunktionsgerÀt"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Installing mtools packages..."
-msgstr "Installiere mtools Pakete..."
+msgid "Subnet:"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installing SANE packages..."
-msgstr "Installiere SANE Pakete..."
+msgid "Zimbabwe"
+msgstr "Simbabwe"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Installing HPOJ package..."
-msgstr "Installiere HPOJ Paket..."
+msgid "Please enter the host name or IP."
+msgstr "Rechnernamen oder IP eingeben."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
+msgid "When"
+msgstr "Wann"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "A command line must be entered!"
-msgstr "Eine Kommandozeile muss eigegeben werden!"
+msgid "Second DNS Server (optional)"
+msgstr "Zweiter DNS Server (optional)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Command line"
-msgstr "Kommandozeile"
+msgid "Finland"
+msgstr "Finnland"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
+"Arguments: (arg)\n"
+"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Pipe into command"
-msgstr "An ein Kommando weiterleiten"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Detected model: %s %s"
-msgstr "Gefundendenes Modell: %s %s"
+msgid "Color depth: %s\n"
+msgstr "Farbtiefe: %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "A valid URI must be entered!"
-msgstr "Sie mĂŒssen eine gĂŒltige URI eingeben!"
+msgid "You can't unselect this package. It must be upgraded"
+msgstr ""
+"Sie können dieses Paket nicht aus der Auswahl entfernen. \n"
+"Es muss aktualisiert werden!"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer Device URI"
-msgstr "Druckeranschluss URI"
+msgid "Loading from floppy"
+msgstr "Laden von Diskette ..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
-"Sie können hier direkt die URI eines Druckers angeben. Die URI muss den CUPS "
-"bzw. den Foomatic Spezifikationen genĂŒgen. Es sei hier noch angemerkt, dass "
-"nicht alle URI-Typen von allen Drucksystemem unterstĂŒtzt werden."
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Port"
-msgstr "Port"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer host name or IP"
-msgstr "Rechnername/IP des Druckers"
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
#, c-format
-msgid "The port number should be an integer!"
-msgstr "Die Port Nummer muss eine ganze Zahl sein!"
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Der Rechnername, bzw die IP-Adresse des Druckers fehlt!"
+msgid "Slovenia"
+msgstr "Slowenien"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
+"Enter a user\n"
+"%s"
msgstr ""
-"Um einen TCP- oder Socket-Drucker verwenden zu können, mĂŒssen Sie auf alle "
-"FÀlle dessen Rechnernamen, bzw. IP-Adresse - möglicherweise auch den Port - "
-"angeben. Bei HP JetDirect Servern ist dies normalerweise die Port-Adresse "
-"9100, bei anderen Servern kann es eine andere sein. Schauen Sie im "
-"Zweifelsfall in die Unterlagen des Herstellers."
+"Benutzerkennzeichen einrichten\n"
+"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
msgstr ""
-"WĂ€hlen Sie einen der automatisch erkanneten Drucker aus der Liste oder geben "
-"Sie den Hostnamen oder die IP-Adresse und optional die Portnummer (wenn Port "
-"nicht angegeben, wird 9100 verwendet) ein."
+"- PCI und USB GerÀte: Eine Auflistung der IDs der Hersteller, GerÀte, "
+"Subhersteller und SubgerÀte von PCI / USB GerÀten."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "Optionen fĂŒr TCP/Socket-Drucker"
+msgid "ProgressBar color selection"
+msgstr "Farbauswahl fĂŒr den Fortschrittsbalken"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Host \"%s\", port %s"
-msgstr "Rechner „%s“, Port %s"
+msgid ""
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
+msgstr ""
+"Hier sind die verschiedenen EintrÀge.\n"
+"Sie können weitere hinzufĂŒgen oder existierende Ă€ndern."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", Rechner „%s“, Port %s"
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Scanning network..."
-msgstr "Netzwerk durchsuchen ..."
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Printer auto-detection"
-msgstr "Selbsterkennung von Druckern"
+msgid ""
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
+msgstr ""
+"Dieser Dienst startet Applikationen der at-Warteschlange wenn der \n"
+"dafĂŒr vorgesehene Zeitpunkt erreicht ist. LĂ€sst die Systemauslastung \n"
+"es zu, werden sog. Batch-Anwendungen gestartet."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "NCP queue name missing!"
-msgstr "Der NCP Warteschlangen-Name fehlt!"
+msgid "Radio support:"
+msgstr "Radiobetrieb:"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "NCP server name missing!"
-msgstr "Der NCP Servername fehlt!"
+msgid "Installing SANE packages..."
+msgstr "Installiere SANE Pakete..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Print Queue Name"
-msgstr "Name der Druckerwarteschlange"
+msgid "boot disk creation"
+msgstr "Boot-Disketten Erstellung"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer Server"
-msgstr "Drucker-Server"
+msgid "LDAP"
+msgstr "LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Um auf einem NetWare-Drucker zu drucken sind folgende Angaben erforderlich: "
-"Name des NetWare-Drucker-Servers (entspricht nicht immer dem TCP/IP-"
-"Rechnernamen des Computers), Name der Drucker-Warteschlange, sowie falls "
-"notwendig, den entsprechenden Benutzernamen samt Passwort."
+msgid "SILO"
+msgstr "SILO"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
#, c-format
-msgid "NetWare Printer Options"
-msgstr "Optionen fĂŒr NetWare-Drucker"
+msgid "Change type"
+msgstr "Typ Àndern"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"Verbinden Sie Ihren Drucker mit einem Linux-Server und lassen Sie Ihre(n) "
-"Windows-Rechner als Client auf ihn zugreifen.\n"
-" \n"
-"Möchten Sie Ihren Drucker wirklich so einrichten, wie Sie es jetzt tun?"
+msgid "SILO Installation"
+msgstr "SILO Installation"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Richten Sie Ihren Windows-Server so ein, dass Ihr Drucker ĂŒber das IPP-"
-"Protokoll erreichbar ist und konfigurieren sie ihn auf dieser Maschine mit "
-"dem Verbindungstyp „%s“ in Printerdrake.\n"
-"\n"
+msgid "Use CD/DVDROM to backup"
+msgstr "Sicherungskopie auf CD/DVDROM"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_messages.pm:1
#, c-format
msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
"\n"
-msgstr ""
-"Sie sind dabei, einen Drucker einzurichten, der ĂŒber ein Windows-"
-"Benutzerkonto mit Passwort druckt. Aufgrund eines Fehlers in der Architektur "
-"der Samba-Client-Software wird das Passwort im Klartext in die Kommandozeile "
-"der Samba-Komponente eingefĂŒgt, welche die zu druckenden Daten auf den "
-"Windows-Server ĂŒbertrĂ€gt. So ist es fĂŒr jeden Benutzer möglich, das Passwort "
-"auf dem Bildschirm anzuzeigen, indem er Kommandos wie zum Beispiel „ps "
-"auxwww“ ausfĂŒhrt.\n"
+"%s\n"
"\n"
-"Wir empfehlen von einer der folgenden Alternativen Gebrauch zu machen (in "
-"allen FĂ€llen muss sichergestellt werden dass nur Maschinen des lokalen "
-"Netzwerks auf den Windows-Server zugreifen können, zum Beispiel mit Hilfe "
-"einer Firewall):\n"
"\n"
-"Drucken Sie ĂŒber ein Benutzerkonto ohne Passwort auf Ihrem Windows-Server, "
-"zum Beispiel ĂŒber das „GUEST“-Benutzerkonto oder ĂŒber ein speziell zum "
-"Drucken eingerichtetes Benutzerkonto. Entfernen Sie nicht den Passwortschutz "
-"von einem persönlichen Benutzerkonto oder vom Administratorkonto.\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
+msgstr ""
+"Herzlichen GlĂŒckwunsch, die Installation ist abgeschlossen.\n"
+"Entfernen Sie die Startmedien (CD-ROMs / Disketten) und drĂŒcken Sie die "
+"Eingabetaste zum Neustart Ihres Rechners.\n"
"\n"
-"Richten Sie Ihren Windows-Server so ein, dass der Drucker unter dem LPD-"
-"Protokoll erreichbar ist. Dann richten sie den Drucker auf dieser Maschine "
-"mit dem Verbindungstyp „%s“ ein.\n"
+"FĂŒr Informationen zu Sicherheitsaktualisierungen dieser Version von Mandrake "
+"Linux informieren Sie sich bitte unter \n"
"\n"
+"%s\n"
+"\n"
+"Wie Sie Ihr System warten können, erfahren Sie im Kapitel „Nach der "
+"Installation“ im offiziellen Benutzerhandbuch von Mandrake Linux."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SECURITY WARNING!"
-msgstr "SICHERHEITSWARNUNG!"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Samba share name missing!"
-msgstr "Der Name der Samba-Freigabe fehlt!"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Sie mĂŒssen entweder Den Servernamen oder seine IP-Adresse angeben!"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Auto-detected"
-msgstr "Selbst gefunden"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Workgroup"
-msgstr "Arbeitsgruppe"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Share name"
-msgstr "Freigabename"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB server IP"
-msgstr "SMB-Server-IP"
+msgid "paranoid"
+msgstr "Paranoid"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "SMB server host"
-msgstr "SMB-Server"
+msgid "Send mail report after each backup to:"
+msgstr "E-Mail Bericht nach jedem Sicherungsvorgang an: "
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
+"This command you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications. But here do not supply the file name "
+"because the file to print is provided by the application.\n"
msgstr ""
-"Falls der gewĂŒnschte Drucker bereits gefunden wurde, wĂ€hlen Sie ihn einfach "
-"aus der Liste unten aus und geben Sie - falls notwendig - Name, Passwort und/"
-"oder DomÀne an."
+"Sie können diesen Befehl auch im „Druckkommando“-Feld vieler Programme "
+"angeben. Tragen Sie bitte keinen Dateinamen ein, da dieser vom Programm "
+"ergÀnzt wird.\n"
+
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolution"
+msgstr "Auflösung"
#: ../../printer/printerdrake.pm:1
#, c-format
@@ -12416,1094 +11312,1093 @@ msgstr ""
"fĂŒr den Drucker, auf den Sie zugreifen möchten, sowie entsprechender "
"Benutzername, Passwort und Arbeitsgruppe."
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) Drucker-Parameter"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Drucker „%s“, auf Server „%s“"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse icmp echo."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", Drucker „%s“, auf Server „%s“"
+msgid "reconfigure"
+msgstr "neu konfigurieren"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Remote printer name missing!"
-msgstr "Der Name des entfernten Druckers fehlt!"
+msgid ""
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+msgstr ""
+"Ihre Karte kann 3D-hardwarebeschleunigt werden, allerdings nur mit \n"
+"XFree %s. BEMERKUNG: DIESE FUNKTION IST NOCH IM EXPERIMENTIERSTADIUM \n"
+"UND KANN ZUM STEHENBLEIBEN IHRES RECHNERS FÜHREN."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Remote host name missing!"
-msgstr "Der Name des entfernten Rechners fehlt!"
+msgid "Xinetd Service"
+msgstr "xinetd"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Remote printer name"
-msgstr "Name des entfernten Druckers"
+msgid "access to network tools"
+msgstr "Zugriff auf Netzwerk-Werkzeuge"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote host name"
-msgstr "Name des entfernten Rechners"
+msgid "Firmware-Upload for HP LaserJet 1000"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
msgstr ""
-"Um einen LPD-Drucker im Netzwerk zu verwenden, mĂŒssen Sie den Rechnernamen "
-"des Drucker-Servers sowie den Druckernamen auf diesem Server angeben, an den "
-"die AuftrĂ€ge ĂŒbertragen werden sollen."
+"Mandrake Linux 9.1 reizt Ihren Multimediarechner voll aus! Verwenden Sie die "
+"neuste Software, um Audiodateien abzuspielen, Ihre Fotos und Bilder zu "
+"bearbeiten sowie Videos abzuspielen ..."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Optionen fĂŒr Netzwerk-Druckerspooler"
+msgid "Here is a list of all auto-detected printers. "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Manual configuration"
-msgstr "Manuelle Konfiguration"
+msgid ""
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
+msgstr ""
+"Fehler bei der Installation von aboot. Soll ich die Installation \n"
+"mit Gewalt versuchen, auch wenn dies die Zerstörung der ersten \n"
+"Partition verursachen kann?"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Sie mĂŒssen einen Drucker wĂ€hlen/ein GerĂ€t eingeben!"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Options Description:\n"
+"\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
+"\n"
+msgstr ""
+"Parameter:\n"
+"\n"
+" In diesem Schritt erlaubt Ihnen DrakBackup folgende Änderungen:\n"
+"\n"
+" - Kompressionsmodus:\n"
+" \n"
+" Mit der „bzip2“ Kompression, werden Ihre Daten\n"
+" besser als mit „gzip“ komprimiert (ca. 2-10 %%).\n"
+" StandardmĂ€ĂŸig ist dier Modus deaktiviert, da er\n"
+" mehr Zeit benötigt (bis zu 1.000%%).\n"
+" \n"
+" - Aktualisierungsmodus:\n"
+"\n"
+" Mit dieser Option können Sie Ihre Sicherungskopie\n"
+" aktuialisieren. Das ist momentan nicht sehr sinnvoll,\n"
+" da Sie Ihre Kopie auspacken mĂŒssen, um sie \n"
+" aktualisieren zu können.\n"
+" \n"
+" - Der „.backupignore“-Modus:\n"
+"\n"
+" Wie bei dem Programm „cvs“, wird DrakBackup alle\n"
+" Dateien/Ordner, die in der Datei „.backupignore“\n"
+" des aktuellen Verzeichnisses aufgefĂŒhrt sind,\n"
+" von der Sicherung ausschließen.\n"
+" Beispiel:\n"
+" > cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" \n"
+"\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+"Restore Selected\n"
+"Files"
msgstr ""
-" (Parallele AnschlĂŒsse: /dev/lp0, /dev/lp1, ..., Ă€quivalent zu LPT1:, "
-"LPT2:, ..., Erster USB Drucker: /dev/usb/lp0, zweiter USB Drucker: /dev/usb/"
-"lp1, ...)."
+"Markierte Dateien\n"
+"wiederherstellen"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Bitte wÀhlen Sie den Anschluss, an dem Ihr Drucker hÀngt."
+msgid ""
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
+msgid "Please fill or check the field below"
msgstr ""
-"Bitte wÀhlen Sie den Anschluss, an dem der Drucker hÀngt oder geben Sie "
-"einen GerÀte- oder Dateinamen in der Eingabezeile an."
+"Bitte fĂŒllen Sie die folgen Felder aus \n"
+"bzw. makieren Sie die korrekten Angaben"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Bitte wÀhlen Sie den Drucker, an den die DruckauftrÀge gehen sollen."
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "Möchten Sie die vorgenommenen Änderungen in „/etc/fstab“ speichern?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
-msgstr ""
-"Bitte wÀhlen Sie den Drucker, den Sie einrichten wollen. Die Einrichtung "
-"wird voll-automatisch erfolgen. Sollte Ihr Drucker nicht richtig erkannt "
-"worden sein oder wollen Sie die Einrichtung selbst vornehmen, wÀhlen Sie "
-"„Manuelle Konfiguration“."
+msgid "Boot Protocol"
+msgstr "Boot-Protokoll"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr ""
+msgid "LVM-disks %s\n"
+msgstr "LVM Platten %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr ""
+msgid "The package %s is needed. Install it?"
+msgstr "Das Paket %s wird benötigt. Soll ich es installieren?"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Die Einrichtung des Druckers wird vollautomatisch erfolgen. Sollte Ihr "
-"Drucker nicht richtig erkannt worden sein oder wollen Sie die Einrichtung "
-"selbst vornehmen, wĂ€hlen Sie „Manuelle Konfiguration“."
+msgid "On boot"
+msgstr "Bei BS-Start"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "The following printer was auto-detected. "
-msgstr "Der folgenden Drucker wurde automatisch erkannt."
+msgid "Bus identification"
+msgstr "Bus"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
-msgstr ""
-"Bitte wÀhlen Sie den Drucker, an den die DruckauftrÀge gehen sollen oder "
-"geben Sie einen GerÀte- oder Dateinamen in der Eingabezeile an."
+msgid "Please make a backup of your data first"
+msgstr "Bitte machen Sie erst eine Sicherheitskopie Ihrer Daten!"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please choose the printer you want to set up or enter a device name/file "
-"name in the input line"
-msgstr ""
-"Bitte wÀhlen Sie den Drucker den sie einrichten wollen oder geben Sie einen "
-"GerÀte- oder Dateinamen in der Eingabezeile an."
+msgid "Vatican"
+msgstr "Vatikan"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
+msgid "You have more than one hard drive, which one do you install linux on?"
msgstr ""
-"Alternativ können Sie einen GerÀte- oder Dateinamen in der Eingabezeile "
-"angeben"
+"Sie haben mehr als eine Festplatte.\n"
+"Auf welche soll GNU/Linux installiert werden?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+msgid "Boot ISO"
+msgstr "Boot ISO"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Eritrea"
+msgstr "Eritrea"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Remove List"
+msgstr "Liste entfernen"
+
+#: ../../share/advertising/05-desktop.pl:1
+#, c-format
+msgid "A customizable environment"
msgstr ""
-"Falls das nicht der Drucker ist, den Sie einrichten wollen, geben Sie einen "
-"GerÀte- oder Dateinamen in der Eingabezeile an."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Available printers"
-msgstr "Vorhandene Drucker"
+msgid "Inuktitut"
+msgstr "Grönland (Inuktitut)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No printer found!"
-msgstr "Kein Drucker erkannt!"
+msgid "Morocco"
+msgstr "Marokko"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You must enter a device or file name!"
-msgstr "Sie mĂŒssen einen GerĂ€te- oder Dateinamen eingeben!"
+msgid "Which printer model do you have?"
+msgstr "Über welchen Druckertyp verfĂŒgen Sie?"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Es wurde kein lokaler Drucker erkannt! Um ihn manuell hinzuzufĂŒgen geben Sie "
-"einfach einen GerÀte- oder Dateinamen in der Eingabezeile an (Parallele "
-"AnschlĂŒsse: /dev/lp0, /dev/lp1, ..., Ă€quivalent zu LPT1:, LPT2:, ...; Erster "
-"USB Drucker: /dev/usb/lp0, zweier USB Drucker: /dev/usb/lp1, ...)."
+msgid "Add a new printer"
+msgstr "Drucker hinzufĂŒgen"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Local Printer"
-msgstr "Lokaler Drucker"
+msgid " All of your selected data have been "
+msgstr " Alle Ihre gewÀhlten Daten wurden "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "USB printer \\#%s"
-msgstr "USB-Drucker \\#%s"
+msgid "<-- Delete"
+msgstr "<-- Löschen"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "Drucker an Parallelport \\#%s"
+msgid "Nepal"
+msgstr "Nepal"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Drucker „%s“ am SMB/Windows Server „%s“"
+msgid "cpu # "
+msgstr "CPU #"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Netzwerkdrucker „%s“, Port %s"
+msgid "chunk size"
+msgstr "BlockgrĂ¶ĂŸe"
-#: ../../printer/printerdrake.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "Detected %s"
-msgstr "%s gefunden"
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "Kommando vorher editieren, mit <c> erhalten Sie eine Kommandozeile."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ", Drucker „%s“ an SMB/Windows Server „%s“"
+msgid "Problems installing package %s"
+msgstr "Probleme beim Installieren von Paket %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", Netzwerkdrucker „%s“, Port %s"
+msgid "You will receive an alert if the load is higher than this value"
+msgstr "Sie erhalten eine Nachricht, wen die Load ĂŒber diesen Wert steigt"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
msgid ""
"\n"
-"Congratulations, your printer is now installed and configured!\n"
"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
msgstr ""
-"\n"
-"Herzlichen GlĂŒckwunsch, Ihr Drucker ist nun installiert und eingerichtet!\n"
-"\n"
-"Sie können nun mit dem „Drucken“ Befehl Ihrer Anwendungen (meistens im "
-"„Datei“-MenĂŒ zu finden) drucken.\n"
-"\n"
-"Falls Sie einen Drucker hinzufĂŒgen, entfernen oder umbenennen wollen,\n"
-"oder wenn Sie die Standardeinstellungen wie Papierschacht oder \n"
-"DruckqualitĂ€t) anpassen wollen, wĂ€hlen Sie „Drucker“ im „Hardware“\n"
-"Bereich des Mandrake Kontrollzentrums."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr "Selbsterkennung von Druckern, die an Windows Rechnern hÀngen"
+msgid "Add a scanner manually"
+msgstr "Scanner manuell hinzufĂŒgen"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr "Selbsterkennung von Druckern, die im lokalen Netzwerk hÀngen"
+msgid "Reload partition table"
+msgstr "Partitionstabelle neu laden"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Selbsterkennung von direkt am Rechner angeschlossenen Druckern"
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr "Ja ich will Autologin mit diesem Kennzeichen und dieser OberflÀche"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Willkommen zum Druckerassistenten\n"
-"\n"
-"Dieser Assistent möchte Ihnen helfen, Ihre(n) lokalen Drucker zu "
-"konfigurieren.\n"
-"\n"
-"Falls Sie Drucker haben, die direkt mit dem Rechner verbunden sind, stellen "
-"Sie sicher, dass diese richtig angeschlossen und eingeschaltet sind.\n"
-"\n"
-"BetĂ€tigen Sie die SchaltflĂ€che „Weiter“, wenn Sie soweit sind, bzw. "
-"„Abbruch“, wenn Sie keine Drucker konfigurieren wollen."
+msgid "Search for fonts in installed list"
+msgstr "Suche installierter Schriften"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Willkommen zum Druckerassistenten\n"
-"\n"
-"Dieser Assistent möchte Ihnen helfen, Ihre(n) lokalen und Netzwerkdrucker zu "
-"konfigurieren.\n"
-"\n"
-"Falls Sie Drucker haben, die direkt mit dem Rechner verbunden sind, stellen "
-"Sie sicher, dass diese richtig angeschlossen und eingeschaltet sind. Ebenso "
-"mĂŒssen die Netzwerkdrucker eingeschaltet und mit dem Netz verbunden sein.\n"
-"\n"
-"Es sei angemerkt, dass sie Erkennung von Netzwerkdruckern etwas lÀnger "
-"dauert, als das Finden von Druckern, die direkt an Ihrem Rechner hÀngen. Sie "
-"sollten daher diesen Punkt ausschalten, sofern Sie nur direkt am Rechner "
-"hÀngende Drucker verwenden wollen.\n"
-"\n"
-"BetĂ€tigen Sie die SchaltflĂ€che „Weiter“, wenn Sie soweit sind, bzw. "
-"„Abbruch“, wenn Sie keine Drucker konfigurieren wollen."
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr "Das lokale Netzwerk endet nicht auf „.0“ - bereinige."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Boot"
+msgstr "BS-Start"
+
+#: ../../harddrake/v4l.pm:1
#, c-format
+msgid "Tuner type:"
+msgstr "Tunertyp:"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
msgstr ""
+"Hier können Sie das Drucksystem fĂŒr Ihren Rechner wĂ€hlen. Andere\n"
+"Betriebssysteme bieten Ihnen nur eines, bei Mandrake Linux können Sie\n"
+"zwischen zwei verschiedenen wÀhlen.\n"
"\n"
-"Willkommen zum Druckerassistenten\n"
-"\n"
-"Dieser Assistent möchte Ihnen helfen, Ihre(n) lokalen und Netzwerkdrucker "
-"sowie Drucker an Windowsrechnern im lokalen Netz zu konfigurieren.\n"
-"\n"
-"Falls Sie Drucker haben, die direkt mit dem Rechner verbunden sind, stellen "
-"Sie sicher, dass diese richtig angeschlossen und eingeschaltet sind. Ebenso "
-"mĂŒssen die Netzwerkdrucker bzw. Windows-Rechner eingeschaltet sein.\n"
+" * „%s“ - Es steht fĂŒr „print, don't queue“ (engl. fĂŒr „Drucken ohne\n"
+"Warteschlange“). Falls Sie einen Drucker haben, der direkt an Ihrem Rechner\n"
+"hÀngt und Sie keine Netzwerkdrucker verwenden wollen, ist dies das\n"
+"Drucksystem Ihrer Wahl. Es kann zwar auch mit Netzwerkdruckern umgehen, ist\n"
+"dabei aber extrem langsam. WĂ€hlen Sie „pdq“, wenn Sie ein GNU/Linux Neuling\n"
+"sind.\n"
"\n"
-"Es sei angemerkt, dass sie Erkennung von Netzwerkdruckern etwas lÀnger "
-"dauert, als das Finden von Druckern, die direkt an Ihrem Rechner hÀngen. Sie "
-"sollten daher diesen Punkt ausschalten, sofern Sie nur direkt am Rechner "
-"hÀngende Drucker verwenden wollen.\n"
+" * „%s“ - Mit dem „Common Unix Printing System“ (engl. fĂŒr „Allgemeines\n"
+"Unix-Drucksystem“) können Sie ebenso gut um auf Ihrem direkt\n"
+"angeschlossenen Drucker drucken, wie auf einem Drucker, der an einem Server\n"
+"auf der anderen Seite der Welt hÀngt. Es ist einfach zu bedienen und kann\n"
+"sowohl als Server als auch als Klient fĂŒr das alte „lpd“-Drucksystem\n"
+"verwendet werden - Es ist somit rĂŒckwĂ€rtskompatibel. Es ist sehr mĂ€chtig,\n"
+"in seiner Grundeinstellung verhĂ€lt es sich jedoch genau wie „pdq“. Wenn Sie\n"
+"einen „lpd“ Server benötigen, mĂŒssen Sie einfach nur den „cups-lpd“ DĂ€mon\n"
+"starten. CUPS bietet grafische Konfigurations- und DruckmenĂŒs.\n"
"\n"
-"BetĂ€tigen Sie die SchaltflĂ€che „Weiter“, wenn Sie soweit sind, bzw. "
-"„Abbruch“, wenn Sie keine Drucker konfigurieren wollen."
+"Sie können diese Wahl spÀter immer wieder Àndern, indem Sie PrinterDrake im\n"
+"Mandrake-Kontrollzentrum starten und dort die SchaltflĂ€che „%s“ betĂ€tigen."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "\"Menu\" key"
+msgstr "MenĂŒtaste"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
msgstr ""
"\n"
-"Willkommen zum Druckereinrichtungsassistenten\n"
"\n"
-"Dieser Assistent hilft Ihnen lokale oder Netzwerkdrucker so einzurichten, "
-"dass dieser Rechner bzw. andere in Ihrem Netzwerk darauf drucken können.\n"
-"\n"
-"Sie werden nur nach den nötigen Informationen ĂŒber den Drucker gefragt, um "
-"Ihnen dann Zugriff auf Treiber, Druckoptionen und Anschlussart zu erhalten."
+"Kontrollieren Sie bitte, ob PrinterDrake Ihern Drucker korrekt erkannt hat. "
+"Falls die Markierung auf einem falschen GerĂ€t oder auf „Rohdaten-Drucker“ "
+"steht, suchen Sie bitte selbst Ihren Drucker in der Liste."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
-msgstr ""
+msgid "Security Administrator:"
+msgstr "Sicherheitsadministrator (Kennzeichen oder E-Mail):"
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ")"
-msgstr ")"
+msgid "Please enter your login"
+msgstr "Bitte geben Sie Ihr Benutzerkennzeichen ein"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid " on "
-msgstr " auf "
+msgid "if set to yes, check permissions of files in the users' home."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "("
-msgstr "("
+msgid ""
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
+msgstr ""
+"Sie haben noch keine Internetverbindung eingerichtet.\n"
+"Sie können dies tun, indem Sie die SchaltflÀche \n"
+"„Konfigurieren“ betĂ€tigen."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Configuring printer ..."
-msgstr "Drucker konfigurieren ..."
+msgid "Fonts copy"
+msgstr "Kopiere Schriften"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Searching for new printers..."
-msgstr "Suche nach neuen Druckern..."
+msgid "Automated"
+msgstr "Automatisiert"
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Do you want to test the configuration?"
+msgstr "Möchten Sie die vorgenommenen Einstellungen prĂŒfen?"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
msgstr ""
-"ANMERKUNG: Je nach Drucker und Drucksystem werden bis zu %d MB zusÀtzlicher "
-"Software auf Ihrem Rechner installiert."
+"Der Drucker „%s“ wurde erfogrich fĂŒr StarOffice/OpenOffice.org/GIMP entfernt."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr "Sind Sie sicher, dass Sie mit diesem Rechner drucken wollen?\n"
+msgid ""
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+" to the Internet as a client.\n"
+"\n"
+"High: There are already some restrictions, and more automatic checks "
+"are run every night.\n"
+"\n"
+"Higher: The security is now high enough to use the system as a server "
+"which can accept\n"
+" connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+" should choose a lower level.\n"
+"\n"
+"Paranoid: This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+" features are at their maximum\n"
+"\n"
+"Security Administrator:\n"
+" If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+" email)"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Wollen Sie oben aufgefĂŒhrte Drucker zum Drucken konfigurieren?\n"
+msgid "Save packages selection"
+msgstr "Paketauswahl speichern"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "Wollen Sie Drucker im lokalen Netzwerk zum Drucken konfigurieren?\n"
+msgid "Remove the last item"
+msgstr "Letzten Eintrag entfernen?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+msgid "User list to restore (only the most recent date per user is important)"
msgstr ""
-"Wollen Sie oben aufgefĂŒhrte Drucker oder Drucker im lokalen Netzwerk zum "
-"Drucken konfigurieren?\n"
+"Liste wiederherzustellender Kennzeichen (letztes Datum per Kennzeichen ist "
+"wichtig)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
+msgid "No net boot images created!"
msgstr ""
-"(Stellen Sie bitte sicher, dass alle Drucker angeschlossen und angeschaltet "
-"sind).\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr "Ich konnte keine Drucker direkt an Ihrem Rechner finden."
+msgid "use pptp"
+msgstr "PPTP verwenden"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
+msgid "Choose which services should be automatically started at boot time"
msgstr ""
-"\n"
-"Ich konnte %d unbekannte Drucker direkt an Ihrem Rechner finden."
+"WĂ€hlen Sie, welche Dienste\n"
+"automatisch beim Systemstart\n"
+"aktiviert werden sollen"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"Ich konnte einen unbekannten Drucker direkt an Ihrem Rechner finden."
+msgid "Learn how to use this printer"
+msgstr "Wie dieser Drucker genutzt werden kann"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr ""
-"Der folgende Drucker\n"
-"\n"
-"%s%s\n"
-"ist direkt an Ihr System angeschlossen"
+msgid "Configure the network now"
+msgstr "Netzwerk jetzt konfigurieren"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"Die folgenden Drucker\n"
-"\n"
-"%s%s\n"
-"sind direkt an Ihr System angeschlossen"
+msgid "Choose a mirror from which to get the packages"
+msgstr "Bitte wÀhlen Sie einen Mirror, von dem Sie die Pakete holen wollen."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
msgstr ""
-"Die folgenden Drucker\n"
-"\n"
-"%s%s\n"
-"sind direkt an Ihr System angeschlossen."
+"Das Werkzeug zum VerĂ€ndern der FAT PartitionsgrĂ¶ĂŸe kann mit der \n"
+"Partition nicht arbeiten. Folgender Fehler trat auf:\n"
+"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "and %d unknown printers"
-msgstr "und %d unbekannte Drucker"
+msgid "Which sector do you want to move it to?"
+msgstr "Zu welchem Sektor wollen Sie wechseln?"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "and one unknown printer"
-msgstr "und ein unbekannter Drucker"
+msgid "Do you want to click on this button?"
+msgstr "Möchten Sie diese SchaltflÀche betÀtigen?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Checking your system..."
-msgstr "Untersuchung Ihres Rechners ..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Restarting CUPS..."
-msgstr "Neustart des X-FontServers"
+msgid "Bahamas"
+msgstr "Bahamas"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr ""
-"Der Rechner ist bereits in der Liste, er kann nicht erneut hinzugefĂŒgt "
-"werden.\n"
+msgid "Manual configuration"
+msgstr "Manuelle Konfiguration"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr "Beispiele fĂŒr korrekte IPs:\n"
+msgid "search"
+msgstr "Suche starten"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Die eingegebene IP ist nicht korrekt.\n"
+msgid ""
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
+msgstr ""
+"Dieser Dienst lÀdt die Tastaturbelegung, die in der Datei \n"
+"„/etc/sysconfig/keyboard“ angegeben ist. Mittels „kbdconfig“ \n"
+"können Sie diese Einstellung Àndern. Schalten Sie diesen Dienst ab, \n"
+"mĂŒssen Sie ab dem nĂ€chsten Systemstart mit der amerikanischen \n"
+"Tastatur vorlieb nehmen."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Server IP missing!"
-msgstr "Die Server-IP fehlt!"
+msgid "Xpmac (installation display driver)"
+msgstr "Xpmac (Installationsbildschirmtreiber)"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "If no port is given, 631 will be taken as default."
+msgid "Zeroconf host name must not contain a ."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
+msgid ""
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
msgstr ""
+"Mittels Syslog versuchen zahlreiche Dienste Verlaufsprotokolle \n"
+"in vorgesehene Dateien zu sichern. Es ist sinnvoll Syslog immer \n"
+"aktiviert zu haben."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Drucker an CUPS-Server auf der Gegenseite"
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Unknown/Others"
+msgstr "Unbekannt/Andere"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Remove selected server"
-msgstr "Löschen des markierten Servers"
+msgid "No TV Card detected!"
+msgstr "Keine TV-Karte gefunden!"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Edit selected server"
-msgstr "Änderung des markierten Servers"
+msgid "Options"
+msgstr "Optionen"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Add server"
-msgstr "Server hinzufĂŒgen"
+msgid "The printer \"%s\" is set as the default printer now."
+msgstr "Der Drucker „%s“ ist jetzt Ihr Standarddrucker“"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
msgstr ""
+"Sie versuchen, eine OKI Win-Laserdrucker einzurichten. Da diese Drucker ein "
+"sehr eigenwilliges Protokol verwenden, funktionieren sie nur, wenn sie am "
+"ersten Parallelport angeschlossen sind. Sollte Ihr Druker an einer anderen "
+"Schnittstelle oder an einer Printserver-Box hĂ€ngen, schließen Sie ihn bitte "
+"an den ersten Parallelport, bevor Sie versuchen eine Testseite zu drucken ..."
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "IP address of host/network:"
-msgstr "IP-Adresse des Rechners/Netzwerks:"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgstr "CPU-Familie (6 steht etwa fĂŒr i686)."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
-"IP-Adresse bzw. Netzwerk sind bereits in der Liste, \n"
-"Sie können sie nicht erneut hinzufĂŒgen.\n"
+msgid "Auto-detected"
+msgstr "Selbst gefunden"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr "Die eingegebene Rechner/Netzwerk Information ist nicht korrekt.\n"
+msgid ""
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
+msgstr ""
+"Sie sind dabei, auf Ihrem Rechner einen PXE-Server als DHCP-Server sowie "
+"einen TFTP-Server einzurichten. Damit ermöglichen Sie es anderen Rechnern "
+"Ihres Netzwerks eine Installation von diesem Rechner aus vorzunehmen.\n"
+"\n"
+"Stellen Sie sicher, dass Sie Ihre Netzwerk-/Internetverbindung mit "
+"DrakConnect eingerichtet haben, bevor Sie fortfahren.\n"
+"Anmerkung: Sie benötigen eine Netzwerkkarte, mit deren Hilfe Sie ein lokales "
+"Netz (LAN) aufsetzen können."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Host/network IP address missing."
+msgid ""
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
+"Sie haben keinen Platz fĂŒr die 1 MB große Start-Partition vorgesehen! Die "
+"Installation wird fortgesetzt, Sie mĂŒssen jedoch eine Start-Partition mit "
+"DiskDrake erstellen."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
+"Please choose the printer you want to set up or enter a device name/file "
+"name in the input line"
msgstr ""
-"WĂ€hlen Sie Netzwerke bzw. Rechner, denen lokale Drucker bekannt gemacht "
-"werden sollen:"
+"Bitte wÀhlen Sie den Drucker den sie einrichten wollen oder geben Sie einen "
+"GerÀte- oder Dateinamen in der Eingabezeile an."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Sharing of local printers"
-msgstr "Gemeinsamer Zugriff auf lokale Drucker"
+msgid "Refuse"
+msgstr "ZurĂŒckweisen"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Remove selected host/network"
-msgstr "Löschen der markierte Rechner/Netzwerke"
+msgid "HFS"
+msgstr "HFS"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Edit selected host/network"
-msgstr "Änderung der markierten Rechner/Netzwerke"
+msgid ""
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
+msgstr ""
+"HardDrake fĂŒhrt Hardwaretests durch, und konfiguriert (falls nötig) \n"
+"neue/geÀnderte Hardware."
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, c-format
-msgid "Add host/network"
-msgstr "HinzufĂŒgen eines Rechners/Netzwerks"
+msgid "Remote Printers"
+msgstr "Netzwerkdrucker"
-#: ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
+msgid "Creating and formatting file %s"
+msgstr "Erzeugen und formatieren der Datei %s"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of sgid files."
msgstr ""
-"Das sind die Rechner und Netzwerke, fĂŒr die die lokalen Drucker zugĂ€nglich "
-"sein sollen:"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
-"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "Automatische Korrektur der CUPS Konfiguration"
+msgid "Choose an existing LVM to add to"
+msgstr "WĂ€hlen Sie einen vorhandenen LVM"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "xfs restart"
+msgstr "xfs Neustart"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
msgstr ""
+"Der Drucker „%s“ existiert bereits. Wollen Sie ihn wirklich \n"
+"ersetzen?"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Japanese text printing mode"
-msgstr "Drucksystem Àndern"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No partition available"
+msgstr "Keine Partition verfĂŒgbar"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
+msgid "Use the scanners on hosts: "
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "None"
-msgstr "Keine"
+msgid "Unselected All"
+msgstr "Markierung löschen"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Additional CUPS servers: "
-msgstr "Weitere CUPS-Server: "
+msgid "Domain Name Resolver"
+msgstr "DNS"
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No remote machines"
-msgstr "Keine entfernten Maschinen"
+msgid "Encryption key (again)"
+msgstr "SchlĂŒssel (erneut)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Custom configuration"
-msgstr "Angepasste Konfiguration"
+msgid "Samba share name missing!"
+msgstr "Der Name der Samba-Freigabe fehlt!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Gemeinsamer Druckerzugriff auf Rechnern/Netzwerken:"
+msgid "True Type install done"
+msgstr "TrueType Installation beendet"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr "Automatische Suche nutzbarer Drucker auf anderen Rechnern"
+msgid "Detection in progress"
+msgstr "Erkennung lÀuft"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr "Die Drucker dieses Rechners sind fĂŒr andere Rechner nutzbar"
+msgid "Build Whole Kernel -->"
+msgstr "Ganzen Kern erstellen -->"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
-"Sie können hier entscheiden, ob Drucker von anderen Rechnern automatisch auf "
-"diesem Rechner zur VerfĂŒgung gestellt werden sollen."
+msgid "Welcome to %s"
+msgstr "Willkommen auf %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+msgid "Please insert the Update Modules floppy in drive %s"
msgstr ""
-"Hier können Sie einstellen, ob die Drucker, die an diesem Rechner hÀngen, "
-"fĂŒr andere Rechner nutzbar sein sollen und falls ja, fĂŒr welche."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "CUPS printer configuration"
-msgstr "Konfiguration des gemeinsamen Zugriffes auf CUPS-Drucker"
+"Bitte legen Sie die Diskette der zu aktualisiernden Module in Laufwerk %s "
+"ein."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
-msgstr "Autoerkennung von Druckern (Lokal, TCP/Socket und SMB Drucker)"
+msgid "Bootsplash"
+msgstr "Startschirm"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"The following printer\n"
"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"%s%s\n"
+"is directly connected to your system"
msgstr ""
+"Der folgende Drucker\n"
"\n"
-"Drucker an entfernten CUPS-Servern mĂŒssen hier nicht konfiguriert werden; "
-"diese Drucker werden automatisch erkannt."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "How is the printer connected?"
-msgstr "Wie ist der Drucker mit Ihrem Rechner verbunden?"
+"%s%s\n"
+"ist direkt an Ihr System angeschlossen"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select Printer Connection"
-msgstr "WĂ€hlen Sie die Drucker-Anbindung"
+msgid "Printer sharing on hosts/networks: "
+msgstr "Gemeinsamer Druckerzugriff auf Rechnern/Netzwerken:"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
+"\n"
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
+"\n"
+"Der Befehl „%s“ erlaubt es Ihnen auch zahlreiche Einstellungen fĂŒr einen "
+"bestimmten Druckauftrag zu Ă€ndern. Geben Sie die gewĂŒnschten Angaben einfach "
+"in der Kommandozeile mit an, etwa: „%s <Datei>“. "
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the user umask."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
-"Argumente: (umask)\n"
-"\n"
-"Setzen der Benutzerzugriffsmaske."
+"In einigen FĂ€llen benötigt der „%s“ Treiber zusĂ€tzliche Informationen,\n"
+"um korrekt zu funktionieren, meistens sollte er jedoch auch ohne \n"
+"funktionieren. Wollen Sie solche Informationen angeben oder es dem Treiber "
+"ĂŒberlassen, nach geeigneten Parametern zu suchen? (Das Austesten durch den "
+"Treiber kann in seltenen FĂ€llen zum „HĂ€ngenbleiben“ des Rechners fĂŒhren, was "
+"jedoch keine HardwareschÀden nach sich ziehen sollte)"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (val)\n"
-"\n"
-"Set the shell timeout. A value of zero means no timeout."
+msgid "Not the correct CD label. Disk is labelled %s."
msgstr ""
-"Argumente: (val)\n"
-"\n"
-"Setzen des Shell-Timeouts. „0“ steht hier fĂŒr ohne Timeout."
-#: ../../security/help.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Arguments: (size)\n"
+"Welcome to the Internet Connection Sharing utility!\n"
"\n"
-"Set shell commands history size. A value of -1 means unlimited."
+"%s\n"
+"\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
-"Argumente: (size)\n"
+"Willkommen zu DrakGW -\n"
+"das Werkzeug zum Teilen Ihrer Internetverbindung\n"
"\n"
-"Setzen der GrĂ¶ĂŸe des Kommandozeilenarchivs. Der Wert „-1“ steht fĂŒr "
-"unbegrenzt."
+"%s\n"
+"\n"
+"WĂ€hlen Sie „Konfigurieren“ wenn Sie den Assistenten starten wollen."
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr ""
+msgid "Cuba"
+msgstr "Kuba"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "if set to yes, check open ports."
-msgstr "Auf „Ja“ gestellt, werden offene Ports kontrolliert."
+msgid "Searching for new printers..."
+msgstr "Suche nach neuen Druckern..."
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
-"Wenn ausgefĂŒllt, wird E-Mail an diese Adresse geschickt, sonst an „root“."
+msgid "Belize"
+msgstr "Belize"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "if set to yes, report check result by mail."
+msgid " (multi-session)"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
+msgid "Kernel Boot Timeout"
+msgstr "BS-Startverzögerung fĂŒr den Kern"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if set to yes, reports check result to tty."
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
+"Ihre Grafikkarte kann 3D-hardwarebeschleunigt werden, allerdings nur mit \n"
+"XFree %s. Ihre Karte wird auch von XFree %s unterstĂŒtzt, wodurch Sie \n"
+"bessere 2D-UnterstĂŒtzung erhalten können."
-#: ../../security/help.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr ""
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "Der DrakX Partitionierungsassistent fand folgende Lösung:"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
+msgid "Hungarian"
+msgstr "Ungarn"
-#: ../../security/help.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "if set to yes, run chkrootkit checks."
+msgid ""
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
msgstr ""
+"WĂ€hlen Sie Ihren Netzanbieter.\n"
+"Sollte er nicht aufgefĂŒhrt sein, wĂ€hlen Sie „Nicht aufgefĂŒhrt“"
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
-msgstr ""
+msgid "Automatic time synchronization (using NTP)"
+msgstr "Automatische Zeit-Synchronisation (durch NTP)"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr ""
+msgid "8 MB"
+msgstr "8 MB"
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr ""
+msgid "LDAP Server"
+msgstr "LDAP Server"
-#: ../../security/help.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
msgstr ""
+"PCMCIA wird normalerweise in Laptops verwendet, um Ethernet-Karten \n"
+"oder Modems verwenden zu können. Dieser Dienst wird nur gestartet, \n"
+"wenn Sie ihn vorher konfiguriert haben. Daher schadet es nicht, \n"
+"wenn Sie ihn auf Rechnern aktivieren, auf denen er nutzlos ist."
-#: ../../security/help.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr ""
+msgid "Choose your country"
+msgstr "Land auswÀhlen"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
+msgid ""
+"\n"
+"- System Files:\n"
msgstr ""
+"\n"
+"- Systemdateien:\n"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr ""
+msgid "Standalone Tools"
+msgstr "EingenstÀndige Werkzeuge"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "if set to yes, report unowned files."
-msgstr ""
+msgid "Where"
+msgstr "Wo"
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the root umask."
-msgstr ""
+msgid "but not matching"
+msgstr "keine Übereinstimmung mit"
-#: ../../security/help.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
-"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
msgstr ""
+"Hier können Sie einen alternativen Treiber (entweder OSS odr ALSA) fĂŒr Ihre "
+"Soundkarte (%s) auswÀhlen"
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
-msgstr ""
+msgid "Configuring PCMCIA cards..."
+msgstr "PCMCIA Karten konfigurieren ..."
-#: ../../security/help.pm:1
+#: ../../common.pm:1
#, c-format
-msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
-msgstr ""
+msgid "kdesu missing"
+msgstr "Ich kann „kdesu“ nicht finden!"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
+msgid "Encryption key"
+msgstr "SchlĂŒssel"
-#: ../../security/help.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMaus"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
-msgstr ""
+msgid "Christmas Island"
+msgstr "Osterinsel"
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
+msgid "Installation of bootloader failed. The following error occured:"
msgstr ""
+"Die Installation des BS-Starters schlug Fehl. Folgender Fehler trat auf:"
-#: ../../security/help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
-msgstr ""
+msgid "EIDE/SCSI channel"
+msgstr "EIDE/SCSI Kanal"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
+msgid "Set this printer as the default"
+msgstr "Als Standarddrucker verwenden"
-#: ../../security/help.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
-msgstr ""
+msgid "partition %s"
+msgstr "Partition %s"
-#: ../../security/help.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
+msgid "Paranoid"
+msgstr "Paranoid"
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
+msgid "NIS"
+msgstr "NIS"
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
-msgstr ""
+msgid "<-- Del User"
+msgstr "<-- Benutzer löschen"
-#: ../../security/help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
-msgstr ""
+msgid "Location on the bus"
+msgstr "Standort auf den Bus"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
-msgstr ""
+msgid "No printer found!"
+msgstr "Kein Drucker erkannt!"
-#: ../../security/help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
-msgstr ""
+msgid "the vendor name of the device"
+msgstr "Herstellername des GerÀts"
+
+#: ../../help.pm:1 ../../install_interactive.pm:1
+#, c-format
+msgid "Erase entire disk"
+msgstr "Komplette Platte löschen"
+
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid " (Default)"
+msgstr " (Standard)"
#: ../../security/help.pm:1
#, c-format
@@ -13520,813 +12415,774 @@ msgid ""
"during the installation of packages."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
-msgstr ""
+msgid "Automatic reconfiguration"
+msgstr "Automatische Rekonfiguration"
-#: ../../security/help.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"The argument specifies if clients are authorized to connect\n"
-"to the X server on the tcp port 6000 or not."
-msgstr ""
+msgid "Receiving Speed:"
+msgstr "Enpfangsgeschwindigkeit: "
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
-msgstr ""
+msgid "Turks and Caicos Islands"
+msgstr "Turks und Caicos Inseln"
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
+msgid "permissions"
+msgstr "Berechtigungen"
-#: ../../security/help.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
+msgid "<- Previous"
+msgstr "<- ZurĂŒck"
-#: ../../security/help.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-msgstr ""
+msgid "Internet Connection Sharing configuration"
+msgstr "Teilen der Internetverbindung - Konfiguration"
-#: ../../security/help.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
+msgid "Toggle between flat and group sorted"
+msgstr "Umschalten zwischen unsortiert und gruppiert"
-#: ../../security/help.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
+msgid "Themes"
+msgstr "Themen"
-#: ../../security/help.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
-msgstr ""
+msgid "Options: %s"
+msgstr "Optionen: %s"
-#: ../../security/help.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
+"Sie verwenden momentan „%s“ als Betriebssystemstarter.\n"
+"WĂ€hlen Sie „Konfigurieren“, wenn Sie den Assistenten starten wollen."
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse broadcasted icmp echo."
-msgstr ""
+msgid "OKI winprinter configuration"
+msgstr "OKI Win-Drucker Konfiguration"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Accept/Refuse bogus IPv4 error messages."
-msgstr ""
+msgid "Saint Helena"
+msgstr "Sankt Helena"
-#: ../../security/level.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "Sicherheitsadministrator (Kennzeichen oder E-Mail)"
+msgid "Security Level"
+msgstr "Sicherheitsebene"
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr "Eine Bibliothek, die gegen sog. „buffer overflow“-Angriffe schĂŒtzt."
-
-#: ../../security/level.pm:1
-#, c-format
-msgid "Use libsafe for servers"
-msgstr "„libsafe“ bei Servern verwenden"
-
-#: ../../security/level.pm:1
-#, c-format
-msgid "Security level"
-msgstr "Sicherheitsebene"
+"Some steps are not completed.\n"
+"\n"
+"Do you really want to quit now?"
+msgstr ""
+"Einige Schritte sind noch nicht komplett.\n"
+"\n"
+"Wollen Sie DrakX wirklich beenden?"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please choose the desired security level"
-msgstr "WĂ€hlen Sie Ihre Sicherheitsebene"
+msgid "Sudan"
+msgstr "Sudan"
-#: ../../security/level.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "DrakSec Basic Options"
-msgstr "DrakSec Grundeinstellungen"
+msgid "Polish (qwertz layout)"
+msgstr "Polen (QWERTZ Layout)"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Diese Ebene bietet die selbe FunktionalitÀt, wie die vorherige. Jedoch ist \n"
-"das System nun komplett geschlossen. Es ist die höchste Sicherheitsebene."
+msgid "Syria"
+msgstr "Syrien"
-#: ../../security/level.pm:1
+# NOTE: this message will be displayed at boot time; that is
+# only the ascii charset will be available on most machines
+# so use only 7bit for this message (and do transliteration or
+# leave it in English, as it is the best for your language)
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
#, c-format
msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
+"Welcome to %s the operating system chooser!\n"
+"\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
+"\n"
msgstr ""
-"Mit dieser Sicherheitsebene wird es möglich, das System als einen \n"
-"Server zu verwenden.\n"
-"Die Sicherheit ist nun ausreichend hoch, um das System als Server \n"
-"einzusetzen, der einer Vielzahl von Klienten einen Verbindungsaufbau \n"
-"erlaubt. Es sei hier angemerkt, dass Ihr Rechner, wenn Sie nur als \n"
-"Klient ins Internet gehen, besser eine niedrigere Sicherhetsebene \n"
-"verwenden sollte."
+"Willkommen zum Betriebssystem-Starter %s\n"
+"\n"
+"Markieren Sie in obiger Liste ein Betriebssystem\n"
+"oder warten Sie %d Sekunden, dann starte ich Ihr Standard-System.\n"
+"\n"
-#: ../../security/level.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Es gibt bereits mehr Restriktionen und jede Nacht werden automatische "
-"Sicherheitstests durchgefĂŒhrt."
+msgid "Portuguese"
+msgstr "Portugal"
-#: ../../security/level.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Das ist die Standard-Sicherheitsebene fĂŒr Rechner, mit Internetzugang \n"
-"als Klient."
+msgid "Loopback file name: "
+msgstr "Name der Loopback-Datei: "
-#: ../../security/level.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
+msgid "DNS server address should be in format 1.2.3.4"
msgstr ""
-"Passwortabfragen sind nun eingeschaltet, aber die Verwendung als \n"
-"Netzwerkrechner kann hier nicht empfohlen werden."
+"Die IP Adresse des DNS-Servers sollte etwa die Form „192.168.1.42“ haben!"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Diese Ebene ist mit Vorsicht zu verwenden. Zwar macht sie Ihr System \n"
-"einfacher handhabbar, aber auch leichter angreifbar: In dieser Form darf \n"
-"der Rechner nicht als Netzwerkrechner (LAN oder Modem) verwendet werden, \n"
-"da Angreifer mangels Passwort an Ihre Daten gelangen können!"
+msgid "Serbia"
+msgstr "Serbien"
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Paranoid"
-msgstr "Paranoid"
+msgid "Newzealand"
+msgstr "Neuseeland"
-#: ../../security/level.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Higher"
-msgstr "Höher"
+msgid "This directory should remain within the root filesystem"
+msgstr "Dieses Verzeichnis muss in der Verzeichnisbaumwurzel bleiben"
-#: ../../security/level.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "High"
-msgstr "Hoch"
+msgid "CapsLock key"
+msgstr "CapsLock Taste"
-#: ../../security/level.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Poor"
-msgstr "Schwach"
+msgid "Install bootloader"
+msgstr "BS-Starter installieren"
-#: ../../security/level.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Welcome To Crackers"
-msgstr "Cracker-Spielplatz"
+msgid "Select the memory size of your graphics card"
+msgstr "WĂ€hlen Sie die SpeichergrĂ¶ĂŸe Ihrer Grafikkarte"
-#: ../../standalone/XFdrake:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Please relog into %s to activate the changes"
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
-"Bitte loggen Sie sich erneut in %s ein, \n"
-"um die Änderungen wirksam werden zu lassen."
-
-#: ../../standalone/XFdrake:1
-#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Bitte loggen Sie sich aus, und drĂŒcken Sie Ctrl-Alt-RĂŒcktaste"
+"[OPTIONS]\n"
+"Anwendung zur Verbindung und Überwachung von Netzwerk und Internet\n"
+"\n"
+"--defaultintf interface : zeige diese Schnittstelle als Voreinstellung\n"
+"--connect : verbinde mit dem Internet wenn nicht schon verbunden\n"
+"--disconnect : trenne vom Internet wenn verbunden\n"
+"--force : bei (dis)connect : erzwinge Verbinden/Trennen.\n"
+"--status : gibt 1 zurĂŒck wenn verbunden sonst 0, beendet sich danach.\n"
+"--quiet : nicht interaktiv. benutzt mit (dis)connect."
#: ../../standalone/drakTermServ:1
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgid "Dynamic IP Address Pool:"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "„/etc/dhcpd.conf“ muss erst angelegt werden!"
+msgid "LVM name?"
+msgstr "LVM Name?"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "Es trat ein Fehler auf! Ist „mkisofs“ installiert?"
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
+msgstr "Einige GerÀte in der Klasse %s wurden entfernt:\n"
-#: ../../standalone/drakTermServ:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr ""
+msgid "Found %s %s interfaces"
+msgstr "Schnittstelle(n) %s %s gefunden"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "No floppy drive available!"
-msgstr "Kein Disketten-Laufwerk verfĂŒgbar!"
+msgid "sticky-bit"
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Floppy can be removed now"
-msgstr "Sie können die Diskette nun entfernen"
+msgid "Post Install"
+msgstr "Nach der Installation"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Couldn't access the floppy!"
-msgstr "Kein Diskettenzugriff möglich!"
+msgid "The internal domain name"
+msgstr "Der interne DomÀnen-Name"
-#: ../../standalone/drakTermServ:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Please insert floppy disk:"
-msgstr "Bitte legen Sie eine Diskette ein:"
+msgid "Card IRQ"
+msgstr "Karten IRQ"
-#: ../../standalone/drakTermServ:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Write Config"
-msgstr "Konfiguration speichern"
+msgid ""
+"Arguments: (umask)\n"
+"\n"
+"Set the user umask."
+msgstr ""
+"Argumente: (umask)\n"
+"\n"
+"Setzen der Benutzerzugriffsmaske."
-#: ../../standalone/drakTermServ:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
#, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr ""
+msgid "logdrake"
+msgstr "LogDrake"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "dhcpd Server Konfiguration"
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "IP Range End:"
+msgid "Choose the floppy drive you want to use to make the bootdisk"
msgstr ""
+"WĂ€hlen Sie das Laufwerk, in dem Sie die Start-Diskette erstellen wollen"
-#: ../../standalone/drakTermServ:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid "IP Range Start:"
-msgstr ""
+msgid "LILO with text menu"
+msgstr "LILO mit TextmenĂŒ"
-#: ../../standalone/drakTermServ:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Name Servers:"
-msgstr "DNS-Server:"
+msgid "Everything (no firewall)"
+msgstr "Alles (Keine Firewall)"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "Domain Name:"
-msgstr "Name der DomÀne:"
+msgid "You must specify a kernel image"
+msgstr "Sie MĂŒssen ein Kern-Abbild angeben"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Broadcast Address:"
-msgstr ""
+msgid ", multi-function device on USB"
+msgstr ", USB MultifunktionsgerÀt"
-#: ../../standalone/drakTermServ:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "Subnet Mask:"
-msgstr ""
+msgid "Do"
+msgstr "Los"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Routers:"
+msgid "Contacting the mirror to get the list of available packages..."
msgstr ""
+"Verbindung mit dem Mirror aufbauen, um eine Liste verfĂŒgbarer Pakete zu "
+"erhalten."
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Netmask:"
-msgstr "Netzmaske:"
+msgid "Lithuanian AZERTY (old)"
+msgstr "Litauen (AZERTY - alt)"
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Subnet:"
-msgstr ""
+msgid "Brazilian (ABNT-2)"
+msgstr "Brasilien (ABNT-2)"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "IP address of host/network:"
+msgstr "IP-Adresse des Rechners/Netzwerks:"
+
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid "dhcpd Config..."
-msgstr "DHCP Konfigurieren ..."
+msgid "System installation"
+msgstr "Installation"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Delete Client"
-msgstr "Client löschen"
+msgid "Saint Vincent and the Grenadines"
+msgstr "St. Vincent und die Grenadinen"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "<-- Edit Client"
-msgstr "<-- Client bearbeiten"
+msgid "/File/_Open"
+msgstr "/Datei/_Öffnen"
-#: ../../standalone/drakTermServ:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Add Client -->"
-msgstr "Klient hinzufĂŒgen -->"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"The argument specifies if clients are authorized to connect\n"
+"to the X server on the tcp port 6000 or not."
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Allow Thin Clients"
-msgstr "Erlaube Thin Clients"
+msgid "Location of auto_install.cfg file"
+msgstr "Ort der auto_install.cfg Datei"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "Thin Client"
-msgstr "Thin Client"
+msgid "Open Firmware Delay"
+msgstr "Open Firmware Verzögerung"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "No net boot images created!"
-msgstr ""
+msgid "Hungary"
+msgstr "Ungarn"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "type: %s"
-msgstr "Typ: %s"
+msgid "Total progess"
+msgstr "Fortschritt"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "<-- Del User"
-msgstr "<-- Benutzer löschen"
+msgid "Color configuration"
+msgstr "Farbkonfiguration"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add User -->"
-msgstr "Benutzer hinzufĂŒgen -->"
+msgid "New Zealand"
+msgstr "Neuseeland"
-#: ../../standalone/drakTermServ:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
msgstr ""
+"Es gibt bereits mehr Restriktionen und jede Nacht werden automatische "
+"Sicherheitstests durchgefĂŒhrt."
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Delete All NBIs"
-msgstr "Alle NBIs löschen"
+msgid "please choose the date to restore"
+msgstr "Bitte wÀhlen Sie, welches Datum wiederhergestellt werden soll."
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "<-- Delete"
-msgstr "<-- Löschen"
+msgid "Switching from ext2 to ext3"
+msgstr "Konvertiere ext2 zu ext3"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "This will take a few minutes."
-msgstr "Das dauert einige Minuten"
+msgid "LPRng"
+msgstr "LPRng"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Build All Kernels -->"
-msgstr "Alle Kerne erstellen -->"
+msgid "Netherlands Antilles"
+msgstr "NiederlÀndische Antillen"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No NIC selected!"
-msgstr "Keine Netzwerkkarte ausgewÀhlt!"
+msgid "Browse to new restore repository."
+msgstr "Zum neuen Wiederherstellungsverzeichnis wechseln"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build Single NIC -->"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
msgstr ""
+"\n"
+"Willkommen zum Druckereinrichtungsassistenten\n"
+"\n"
+"Dieser Assistent hilft Ihnen lokale oder Netzwerkdrucker so einzurichten, "
+"dass dieser Rechner bzw. andere in Ihrem Netzwerk darauf drucken können.\n"
+"\n"
+"Sie werden nur nach den nötigen Informationen ĂŒber den Drucker gefragt, um "
+"Ihnen dann Zugriff auf Treiber, Druckoptionen und Anschlussart zu erhalten."
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No kernel selected!"
-msgstr "Kein Kern ausgewÀhlt!"
+msgid "and %d unknown printers"
+msgstr "und %d unbekannte Drucker"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Build Whole Kernel -->"
-msgstr "Ganzen Kern erstellen -->"
+msgid ""
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Boot ISO"
-msgstr "Boot ISO"
+msgid "No ISDN PCI card found. Please select one on the next screen."
+msgstr ""
+"Ich konnte keine PCI ISDN-Karte finden.\n"
+"Bitte wĂ€hlen Sie im nĂ€chsten MenĂŒ eine aus."
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
#, c-format
-msgid "Boot Floppy"
-msgstr "Bootdiskette"
+msgid "GB"
+msgstr "GB"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
+#, c-format
+msgid "Please give a user name"
+msgstr "Bitte geben Sie ein Benutzerkennzeichen an"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Enable CD Boot?"
+msgstr "BS-Start von CD erlauben"
+
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid " enter `void' for void entry"
+msgstr "Geben Sie „void“ fĂŒen Leeren Eintrag an"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "on Hard Drive"
+msgstr "auf Festplatte"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Winmodem connection"
+msgstr "Winmodem Verbindung"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
-"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
+"Congratulations, your printer is now installed and configured!\n"
"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
+msgstr ""
"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
+"Herzlichen GlĂŒckwunsch, Ihr Drucker ist nun installiert und eingerichtet!\n"
"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Sie können nun mit dem „Drucken“ Befehl Ihrer Anwendungen (meistens im "
+"„Datei“-MenĂŒ zu finden) drucken.\n"
"\n"
-msgstr ""
+"Falls Sie einen Drucker hinzufĂŒgen, entfernen oder umbenennen wollen,\n"
+"oder wenn Sie die Standardeinstellungen wie Papierschacht oder \n"
+"DruckqualitĂ€t) anpassen wollen, wĂ€hlen Sie „Drucker“ im „Hardware“\n"
+"Bereich des Mandrake Kontrollzentrums."
-#: ../../standalone/drakTermServ:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+"Set the password history length to prevent password reuse."
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "Now, you can run xawtv (under X Window!) !\n"
+msgstr "Sie können nun (unter X-Windows) „xawtv“ starten.\n"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr ""
+"Der Swap-Bereich ist zu klein, um die Installation zu ermöglichen! \n"
+"Bitte vergrĂ¶ĂŸern Sie den Bereich."
+
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "%s on %s"
+msgstr "%s (Port %s)"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
msgstr ""
+"GNU/Linux arbeitet mit GMT (Greenwich Mean Time) und ĂŒbersetzt diese anhand\n"
+"der Zeitzone in Ihre lokale Zeit.\n"
+"\n"
+"Da Microsoft Windows(TM) nicht sinnvoll mit GMT umgehen kann, mĂŒssen Sie\n"
+"„Nein“ wĂ€hlen, falls Sie auch ein Betriebssystem aus dem Hause Microsoft\n"
+"auf Ihrem Rechner „beherbergen“.\n"
+"\n"
+"Die Verwendung der Option „%s“ reguliert Ihre Uhr, indem sie Verbindung mit\n"
+"einem Zeitserver im Internet aufnimmt. WĂ€hlen Sie aus der Liste einen\n"
+"Server in Ihrer NÀhe. Damit die funktioniert benötigen Sie eine stÀndige\n"
+"Internetverbindung."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add/Del Clients"
-msgstr "Clients hinzufĂŒgen/löschen"
+msgid "Which is your timezone?"
+msgstr "WĂ€hlen Sie Ihre Zeitzone"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add/Del Users"
-msgstr "Benutzer hinzufĂŒgen/löschen"
+msgid "Guinea"
+msgstr "Guinea"
-#: ../../standalone/drakTermServ:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Net Boot Images"
-msgstr ""
+msgid "The system is now connected to the Internet."
+msgstr "Das System ist jetzt mit dem Internet verbunden."
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr ""
+msgid "South Georgia and the South Sandwich Islands"
+msgstr "South Georgia und die South Sandwich Islands"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Stop Server"
-msgstr "Server stoppen"
+msgid "Japan (broadcast)"
+msgstr "Japan (terrestrisch)"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Start Server"
-msgstr "Server starten"
+msgid "Mozambique"
+msgstr "Mosambik"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "Disable Server"
-msgstr "Server deaktivieren"
+msgid "Icon"
+msgstr "Symbol"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Enable Server"
-msgstr "Server aktivieren"
+msgid "Please choose what you want to backup"
+msgstr "Bitte wÀhlen Sie, was Sie sichern wollen"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "Mandrake Terminal Server Konfiguration"
+msgid "256 colors (8 bits)"
+msgstr "256 Farben (8 Bit)"
-#: ../../standalone/drakautoinst:1
+#: ../../any.pm:1
#, c-format
-msgid "Remove the last item"
-msgstr "Letzten Eintrag entfernen?"
+msgid "Read-write"
+msgstr "Schreiben/Lesen"
-#: ../../standalone/drakautoinst:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Add an item"
-msgstr "Eintrag hinzufĂŒgen"
+msgid "Size: %s\n"
+msgstr "GrĂ¶ĂŸe: %s\n"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Auto Install"
-msgstr "Auto-Installation"
+msgid "Hostname: "
+msgstr "Rechnername: "
-#: ../../standalone/drakautoinst:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
+msgid "Chunk size %s\n"
+msgstr "BlockgrĂ¶ĂŸe %s\n"
+
+#: ../../share/advertising/02-community.pl:1
+#, c-format
+msgid "Build the future of Linux!"
msgstr ""
-"Die Diskette wurde erfolgreich erstellt.\n"
-"Sie können die Installation nun automatisch durchfĂŒhren."
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congratulations!"
-msgstr "Gratuliere!"
+msgid "Local Printer"
+msgstr "Lokaler Drucker"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
msgstr ""
-"\n"
-"Willkommen.\n"
-"\n"
-"Die Parameter der Autoinstallation sind in den Abschnitten rechts verfĂŒgbar."
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Creating auto install floppy"
-msgstr "Erstellen einer Auto-Installationsdiskette"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgstr "[--file=datei] [--word=word] [--explain=ausdruck] [--alert]"
-#: ../../standalone/drakautoinst:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "manual"
-msgstr ""
+msgid "ADSL connection"
+msgstr "ADSL Verbindung"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
+msgid "No configuration, please click Wizard or Advanced.\n"
msgstr ""
-"Bitte wĂ€hlen Sie fĂŒr jeden Schritt, ob er wie bei Ihrer Installation "
-"vorgenommen werden soll, oder ob Sie ihn manuell durchfĂŒhren wollen."
+"Keine Konfiguration. WĂ€hlen Sie dein Assistenten oder Fortgeschritten.\n"
#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Automatische Konfiguration der Schritte"
+msgid "Error!"
+msgstr "Fehler!"
-#: ../../standalone/drakautoinst:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "replay"
-msgstr "wiederholen"
+msgid "cable connection detected"
+msgstr "Kabel Verbindung gefunden"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
+msgid "Permission denied transferring %s to %s"
msgstr ""
-"Sie sind dabei, eine Auto-Installationsdiskette zu erstellen. Diese\n"
-"Möglichkeit ist gefÀhrlich und sollte mit Vorsicht verwendet werden!\n"
-"\n"
-"Sie können mit diesem Werkzeug die Installation, die Sie auf Ihrem\n"
-"Rechner erneut durchspielen, wobei Sie an einigen Stellen interaktiv\n"
-"Einfluss nehmen zu können.\n"
-"\n"
-"Aus SicherheitsgrĂŒnden wird die Partitionierung und Formatierung nie\n"
-"automatisch durchgefĂŒhrt.\n"
-"\n"
-"Wollen Sie fortfahren?"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Auto Install Configurator"
-msgstr "Auto-Installationskonfigurator"
+msgid "/_Report Bug"
+msgstr "/_Fehler Melden"
-#: ../../standalone/drakautoinst:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Ich kann die benötigte Abbild-Datei „%s“ nicht finden."
+msgid "Resize"
+msgstr "GrĂ¶ĂŸe verĂ€ndern"
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
#, c-format
-msgid "Error!"
-msgstr "Fehler!"
+msgid "Dominica"
+msgstr "Dominikanische Republik"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Please enter the device name to use for backup"
+msgstr "Bitte geben Sie den GerĂ€tenamen fĂŒr Archivierung an."
+
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Resolution: %s\n"
+msgstr "Auflösung: %s\n"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "matching"
+msgstr "Übereinstimmung mit"
+
+#: ../../install2.pm:1
+#, c-format
msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
msgstr ""
-"\n"
-"Wiederherstellungsprobleme:\n"
-"\n"
-"DrakBackup wird bei der Wiederherstellung alle Dateien \n"
-"kontrollieren, bevor sie wiederhergestellt werden.\n"
-"Da vor der Wiederherstellung alle Dateien im \n"
-"Zielverzeichnis von DrakBackup gelöscht werden, \n"
-"gehen alle darin entghaltenen Daten verloren! \n"
-"Seien Sie daher vorsichtig und Àndern Sie die Sicherungskopien \n"
-"nicht manuell.\n"
+"Ich kann die Kernmodule, die zu diesem Kern passen, nicht finden (Datei %s "
+"fehlt). Das bedeutet normalerweise das Ihre Startdiskette nicht mit dem "
+"Installationsmedium ĂŒbereinstimmt (Bitte erstellen Sie eine neue "
+"Startdiskette). "
-#: ../../standalone/drakbackup:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"WĂ€hlen Sie bitte den richtigen Anschluss. So ist etwa der unter Windows\n"
+"„COM1“ genannte Anschluss in GNU/Linux unter „ttyS0“ erreichbar."
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "The following packages are going to be removed"
+msgstr "Die folgenden Pakete werden entfernt"
+
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#, c-format
+msgid "Connect to the Internet"
+msgstr "Internetverbindung"
+
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Use existing partitions"
+msgstr "Verwende existierende Partition(en)"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Canadian (Quebec)"
+msgstr "Kanada (Québec)"
+
+#: ../../Xconfig/various.pm:1
#, c-format
+msgid "Mouse device: %s\n"
+msgstr "Mausschnittstelle: %s\n"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Reselect correct fonts"
+msgstr "Neuwahl korrekter Schriften"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"options description:\n"
+"Options Description:\n"
"\n"
"Please be careful when you are using ftp backup, because only \n"
"backups that are already built are sent to the server.\n"
@@ -14342,171 +13198,418 @@ msgstr ""
"Rechner erstellt werden.\n"
"\n"
-#: ../../standalone/drakbackup:1
-#, c-format
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
+"Options\n"
"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
+msgstr ""
+"Options\n"
"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
+" Sie können direkt bei Betriebssystemstart die grafische Umgebung\n"
+"aktivieren. Durch betĂ€tigen der SchaltflĂ€che „%s“ wird in eine reine\n"
+"Textumgebung gestartet. Das ist sinnvoll fĂŒr Server oder wenn Sie bei dem\n"
+"Versuch die grafische Umgebung zu konfigurieren erfolglos waren. WĂ€hlen Sie\n"
+"„%s“, um die grafische Umgebung vorzufinden."
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "We are now going to configure the %s connection."
+msgstr "Wir werden nun die Verbindung „%s“ konfigurieren."
+
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#, c-format
+msgid "MandrakeExpert Corporate"
+msgstr "MandrakeExpert Corporate"
+
+#: ../../standalone.pm:1
+#, c-format
+msgid ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
+msgstr ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Write protection"
+msgstr "Selbsterkennung von Druckern"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "You've not selected any font"
+msgstr "Konnte keine Schriften finden.\n"
+
+#: ../../steps.pm:1
+#, c-format
+msgid "Language"
+msgstr "Sprache auswÀhlen"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer model selection"
+msgstr "Auswahl des Druckertyps"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
+msgstr ""
+"Nach Änderung des Partitionstyps von %s, werden sĂ€mtliche Daten darauf "
+"gelöscht"
+
+#: ../../common.pm:1
+#, c-format
+msgid "%d seconds"
+msgstr "%d Sekunden"
+
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#, c-format
+msgid "Insert a blank floppy in drive %s"
+msgstr "Legen Sie eine leere Diskette in das %s ein."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "A valid URI must be entered!"
+msgstr "Sie mĂŒssen eine gĂŒltige URI eingeben!"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "Found \"%s\" interface do you want to use it ?"
+msgstr "Schnittstelle \"%s\" gefunden. Wollen Sie sie verwenden?"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Re-configure interface and DHCP server"
+msgstr "Neu konfigurieren des GerÀts und des DHCP-Servers"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Sound configuration"
+msgstr "Sound Konfiguration"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Photo test page"
+msgstr "Foto-Testseite"
+
+#: ../../help.pm:1 ../../install_interactive.pm:1
+#, c-format
+msgid "Custom disk partitioning"
+msgstr "Benutzerdefinierte Partitionierung"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Enter Printer Name and Comments"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"The following printers\n"
"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr ""
+"Die folgenden Drucker\n"
"\n"
+"%s%s\n"
+"sind direkt an Ihr System angeschlossen."
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "type: %s"
+msgstr "Typ: %s"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovakian (QWERTY)"
+msgstr "Slowakei (QWERTY)"
+
+#: ../../standalone/draksound:1
+#, c-format
+msgid "No Sound Card detected!"
+msgstr "Keine Soundkarte erkannt!"
+
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#, c-format
+msgid "Mouse Port"
+msgstr "Maus Port"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Ftp Server"
+msgstr "FTP Server"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable msec hourly security check."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "%s fonts conversion"
+msgstr "pfm-Schriftkonvertierung"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the type of bus on which the mouse is connected"
+msgstr "Der Typ des Busses, an dem die Maus angeschlossen ist."
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Uganda"
+msgstr "Uganda"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Arguments: (size)\n"
+"\n"
+"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Argumente: (size)\n"
+"\n"
+"Setzen der GrĂ¶ĂŸe des Kommandozeilenarchivs. Der Wert „-1“ steht fĂŒr "
+"unbegrenzt."
-#: ../../standalone/drakbackup:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used, because with incremental \n"
-"backups it is necessary to restore one by one each older backup.\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
"\n"
-"So if you don't want to restore a user please unselect all their\n"
-"check boxes.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
"\n"
-"Otherwise, you are able to select only one of these.\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
"\n"
-" - Incremental Backups:\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
+"\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
+"\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
"\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
"\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
"\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
+"\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
+"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
+"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
+"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
msgstr ""
-"Parameter:\n"
+"Nun bekommen Sie eine Zusammenfassung verschiedener Informationen Ihres\n"
+"Systems. Je nach vorhandener Hardware sehen Sie hier (oder eben nicht) die\n"
+"folgende EintrÀge. Jeder Eintrag besteht aus einem konfigurierbaren GerÀt\n"
+"gefolgt vom dessen aktuellen Zustand. Durch betĂ€tigen der SchaltflĂ€che „%s“\n"
+"können Sie diesen Àndern.\n"
"\n"
-" - Systemdateien sichern:\n"
-" \n"
-"\tDiese Option erlaub es Ihnen Ihr „/etc“ Verzeichnis\n"
-"\tmit den darin enthaltenen Konfigurationsdateien zu\n"
-"\tsichern. Seien Sie vorsichtig, damit Sie wÀhrend der\n"
-"\tWiederherstellung folgende Dateien nicht ĂŒberschreiben:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
+" * „%s“: Kontrollieren Sie die aktuelle Tastaturvorgabe und wĂ€hlen Sie die\n"
+"SchaltflÀche, falls Sie die Vorgabe Àndern wollen.\n"
"\n"
-" - Benutzerdateien sichern:\n"
+" * „%s“: „%s“: Kontrollieren Sie, ob die Auswahl des Staates, in dem Sie\n"
+"sich befinden korrekt ist. Falls nicht, betÀtigen Sie bitte die\n"
+"SchaltflĂ€che „%s“ und wĂ€hlen Sie den richtigen. Ist Ihr Staat nicht in der\n"
+"Liste, die Sie gezeigt bekommen, können Sie ĂŒber die SchaltflĂ€che „%s“ eine\n"
+"vollstÀndigere Liste erzwingen.\n"
"\n"
-"\tDiese Option erlaubt es Ihnen die Benutzerkenn-\n"
-"\tzeichen zu wÀhlen, deren Daten gesichert werden\n"
-"\tsollen.\n"
-"\tEs ist sinnvoll, die Browser-Caches vom Sichern\n"
-"\tauszunehmen, um Sicherungsplatz zu sparen.\n"
+" * „%s“: „DrakX“ versucht die Zeitzone anhand des gewĂ€hlten Staates zu\n"
+"setzen. Sollte diese Auswahl nicht korrekt sein (manche Staaten etwa\n"
+"ĂŒberspannen mehrere Zeitzonen) können Sie durch betĂ€tige der SchaltflĂ€che\n"
+"„%s“ Ihre lokale Zeitzone setzen.\n"
"\n"
-" - Andere Dateien sichern:\n"
+" * „%s“: Kontrollieren Sie die konfigurierte Maus und betĂ€tigen Sie, falls\n"
+"notwendig, die SchaltflÀche.\n"
"\n"
-"\tMit dieser Option können Sie weitere Dateienn\n"
-"\tzum Sichern vorsehen. Sollten Sie diese Version\n"
-"\tverwenden, können Sie momentan keine inkre-\n"
-"\tmentellen Aktualisierungen vornehmen.\n"
+" * „%s“: Durch Anwahl der SchaltflĂ€che „%s“ startet den Druckerassistenten.\n"
+"Weitere Informationen zu diesem Assistenten erhalten Sie im Drucker-Kapitel\n"
+"des „Starter Handbuch“. Das dort vorgestellte Programm entspricht dem\n"
+"wÀhrend der Installation angebotenen.\n"
"\n"
-" - Inkrementelle Archivierung:\n"
+" * „%s“: Falls eine Soundkarte in Ihrem Rechner gefunden wurde, wird sie\n"
+"hier angezeigt. Sollte die von DrakX getroffene Auswahl nicht korrekt sein,\n"
+"betÀtigen Sie einfach die SchaltflÀche, um sie zu korrigieren.\n"
"\n"
-"\tInkrementelle Archivierung ist die mÀchtigste\n"
-"\tder vorhandenen Optionen. Sie erlaubt es\n"
-"\tIhnen beim ersten Aufruf eine komplette\n"
-"\tSicherungskopie Ihres Systems zu erstellen und\n"
-"\tanschließnd nur noch Änderungen zu speichern.\n"
-"\tSomit sind Sie in der Lage, wÀhrend des Wieder-\n"
-"\therstellens, den Datenbestand eines bestimmten\n"
-"\tZeitpunkts zu erzeugen.\n"
-"\tSollten sie diese Alernative nicht gewÀhlt haben,\n"
-"\twerden die alten Sicherungen vor dem Ertellen\n"
-"\teiner neuen Sicherungskopie gelöscht.\n"
+" * „%s“: DrakX richtet Ihre Grafikumgebung normalerweise in der Auflösung\n"
+"„800×600“ bzw. „1024×768“ ein. Sollte Ihnen das nicht zusagen, können Sie\n"
+"es durch betĂ€tigen der SchaltflĂ€che „%s“ Ă€ndern.\n"
"\n"
+" * „%s“: Falls eine TV-Karte in Ihrem Rechner gefunden wurde, wird sie hier\n"
+"angezeigt. Falls Sie eine TV-Karte besitzen, die hier nicht richtig erkannt\n"
+"wurde, können Sie versuchen, diese manuell einzurichten. BetÀtigen Sie\n"
+"einfach die SchaltflĂ€che „%s“.\n"
"\n"
+" * „%s“: Falls eine ISDN Karte in Ihrem Rechner gefunden wurde, wird sie\n"
+"hier angezeigt. Durch Anwahl der SchaltflĂ€che „%s“können Sie die Parameter\n"
+"Ă€ndern.\n"
+"\n"
+" * „%s“: Falls Sie Ihren Internetzugang oder Ihr lokales Netzwerk nun\n"
+"einrichten wollen, können Sie das hier tun.\n"
+"\n"
+" * „%s“: Dieser Eintrag ermöglicht es Ihnen, die Sicherheitsebene Ihres\n"
+"Systems zu Ă€ndern, die Sie in einem frĂŒheren Installationsschritt ()\n"
+"gewÀhlt haben.\n"
+"\n"
+" * „%s“: Falls Sie Ihren Rechner mit dem Internet verbinden wollen, ist es\n"
+"sinnvoll sich vor ungebetenen Eindringlingen durch einrichten einer\n"
+"Firewall zu schĂŒtzen. Lesen Sie das entsprechende Kapitel im „Starter\n"
+"Handbuch“, wenn Sie weitere Informationen benötigen.\n"
+"\n"
+" * „%s“: Falls Sie die Konfiguration Ihres Betriebssystemstarters Ă€ndern\n"
+"wollen, wÀhlen Sie diese SchaltflÀche. Es sei angemerkt, dass dieser Punkt\n"
+"sich an fortgeschrittenere Nutzer richtet.\n"
+"\n"
+" * „%s“: Sie können hier die Dienste wĂ€hlen, die ab dem Start von Mandrake\n"
+"Linux zur VerfĂŒgung gestellt werden sollen. Wollen Sie den Rechner als\n"
+"Server verwenden, sollten Sie unbedingt einen Blick auf diese Liste werfen."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Comoros"
+msgstr "Komoren"
+
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"options description:\n"
"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
"\n"
-" - Backup User files: \n"
"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
+"We are now going to configure the %s connection.\n"
+"\n"
+"\n"
+"Press OK to continue."
+msgstr ""
+"\n"
+"\n"
+"\n"
+"Wir werden nun die Verbindung „%s“ konfigurieren.\n"
"\n"
-" - Backup Other files: \n"
"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
+"WĂ€hlen Sie „OK“, um fortzufahren."
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Yaboot mode"
+msgstr "Yaboot Modus"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
+msgstr "USA (Kabel)"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid ""
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+msgstr ""
+"Ich kann LILO nicht ausfĂŒhren!FĂŒhren Sie bitte mit dem privilegierten "
+"Benutzerkennzeichen „lilo“ in einer Konsole aus, um die Themen-Installation "
+"zu beenden."
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Generische 3 Tasten Maus"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Select another media to restore from"
+msgstr "WĂ€hlen Sie ein anderes Medium von dem Sie wiederherstellen wollen."
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Software Manager"
+msgstr "Software-Verwaltung"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Restore Description:\n"
" \n"
+"Only the most recent date will be used, because with incremental \n"
+"backups it is necessary to restore one by one each older backup.\n"
+"\n"
+"So if you don't want to restore a user please unselect all their\n"
+"check boxes.\n"
+"\n"
+"Otherwise, you are able to select only one of these.\n"
+"\n"
" - Incremental Backups:\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
msgstr ""
"Parameter:\n"
@@ -14552,4798 +13655,5704 @@ msgstr ""
"\n"
"\n"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Einige der Sendmail-Fehler beruhen auf einer\n"
-" fehlerhaften PostFix Konfiguration. Um sie zu\n"
-" beheben mĂŒssen Sie „myhostname“ oder „mydomain“\n"
-" in „/etc/postfix/main.cf“ korrigieren.\n"
-"\n"
+msgid "Re-submit"
+msgstr "Erneut verschicken"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-"Parameter:\n"
-"\n"
-" In diesem Schritt erlaubt Ihnen DrakBackup folgende Änderungen:\n"
-"\n"
-" - Kompressionsmodus:\n"
-" \n"
-" Mit der „bzip2“ Kompression, werden Ihre Daten\n"
-" besser als mit „gzip“ komprimiert (ca. 2-10 %%).\n"
-" StandardmĂ€ĂŸig ist dier Modus deaktiviert, da er\n"
-" mehr Zeit benötigt (bis zu 1.000%%).\n"
-" \n"
-" - Aktualisierungsmodus:\n"
-"\n"
-" Mit dieser Option können Sie Ihre Sicherungskopie\n"
-" aktuialisieren. Das ist momentan nicht sehr sinnvoll,\n"
-" da Sie Ihre Kopie auspacken mĂŒssen, um sie \n"
-" aktualisieren zu können.\n"
-" \n"
-" - Der „.backupignore“-Modus:\n"
-"\n"
-" Wie bei dem Programm „cvs“, wird DrakBackup alle\n"
-" Dateien/Ordner, die in der Datei „.backupignore“\n"
-" des aktuellen Verzeichnisses aufgefĂŒhrt sind,\n"
-" von der Sicherung ausschließen.\n"
-" Beispiel:\n"
-" > cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" \n"
-"\n"
+msgid "CD in place - continue."
+msgstr "Aktuelle CD - fortfahren."
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Drakbackup"
-msgstr "DrakBackup"
+msgid "KB"
+msgstr "KB"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restore"
-msgstr "Wiederherstellen"
+msgid "Network & Internet"
+msgstr "Netzwerk & Internet"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup Now"
-msgstr "Jetzt sichern"
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Litauen (QWERTY - Phonetisch)"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Advanced Configuration"
-msgstr "Expertenkonfiguration"
+msgid "Net Boot Images"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Wizard Configuration"
-msgstr "AssistentengestĂŒtzte Konfiguration"
+msgid "Sharing of local scanners"
+msgstr "Gemeinsamer Zugriff auf lokale Scanner"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "View Backup Configuration."
-msgstr "Sicherungskonfiguration anzeiegen"
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr "Das Plug'n'Play testen schlug fehl. Bitte wÀhlen Sie einen Monitor."
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Backup Now from configuration file"
-msgstr "Jetzt Sicherung anhand der Konfigurationsdatei erstellen."
+msgid "Services and deamons"
+msgstr "Dienste und DĂ€monen"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Drakbackup Configuration"
-msgstr "DrakBackup Konfiguration"
+msgid "Remote host name missing!"
+msgstr "Der Name des entfernten Rechners fehlt!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Total Progress"
-msgstr "Fortschritt"
+msgid "with /usr"
+msgstr "mit „/usr“"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sending files..."
-msgstr "Dateien ĂŒbertragen ..."
+msgid "Network"
+msgstr "Netzwerk"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "files sending by FTP"
-msgstr "DatenĂŒagung via FTP"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgstr "Selbsterkennung von Druckern, die an Windows Rechnern hÀngen"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup other files"
-msgstr "Andere Dateien sichern"
+msgid "This password is too simple"
+msgstr "Dieses Passwort ist zu einfach"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup user files"
-msgstr "Benutzerdateien sichern"
+msgid "Slovakian (QWERTZ)"
+msgstr "Slowakei (QWERTZ)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "Backup system files"
-msgstr "Systemdateien sichern"
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Under Devel ... please wait."
-msgstr "In Entwicklung, haben Sie noch etwas Geduld ..."
+msgid "Truly minimal install (especially no urpmi)"
+msgstr "Extrem minimale Installation (ohne „urpmi“)"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+" Transfer \n"
+"Now"
msgstr ""
-"Keine Konfigurationsdatei gefunde.\n"
-"Bitte wĂ€hlen Sie den „Assistenten“ oder „Erweitert“."
+" Übertragung \n"
+"Jetzt"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please select data to backup..."
-msgstr "Bitte wÀhlen Sie die zu sichernden Daten..."
+msgid "Use daemon"
+msgstr "DĂ€mon verwenden"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
#, c-format
-msgid "Please select media for backup..."
-msgstr "Bitte wÀhlen Sie ein Sicherungsmedium..."
+msgid "Authentication"
+msgstr "Authentifizierung"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please select data to restore..."
-msgstr "Bitte wÀhlen Sie die wiederherzustellenden Daten..."
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Diesen Drucker fĂŒr StarOffice/OpenOffice.org/GIMP hinzufĂŒgen"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Die folgenden Pakete mĂŒssen installiert werden:\n"
+msgid "Additional CUPS servers: "
+msgstr "Weitere CUPS-Server: "
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
-"Fehler bei der Üertragung via FTP.\n"
-" Bitte korrigieren Sie Ihre FTP-Konfiguration."
+"WĂ€hlen Sie einen der automatisch erkanneten Drucker aus der Liste oder geben "
+"Sie den Hostnamen oder die IP-Adresse und optional die Portnummer (wenn Port "
+"nicht angegeben, wird 9100 verwendet) ein."
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount %s?"
+msgstr "Wo wollen Sie „%s“ einhĂ€ngen?"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Restore Via Network"
+msgstr "Über Netzwerk wiederherstellen"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Algeria"
+msgstr "Algerien"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd-size"
+msgstr "GrĂ¶ĂŸe der Init-RamDisk"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
+#, c-format
msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
-"Sendmail Fehler\n"
-" Ihre Bericht-Mail konnte nicht versandt werden.\n"
-" Bitte richten Sie Sendmail ein."
+"Falls fĂŒr Ihre Karte verschiedene Server zur VerfĂŒgung stehen, etwa mit und\n"
+"ohne 3D-Beschleunigung, werden Sie gebeten, den zu wÀhlen, der Ihren\n"
+"BedĂŒrfnissen am besten entspricht."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Next"
-msgstr "Weiter"
+msgid "\tBackups use tar and gzip\n"
+msgstr "\tSicherungen verwenden „tar“ und „gzip“\n"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Previous"
-msgstr "<- ZurĂŒck"
+msgid "2 MB"
+msgstr "2 MB"
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Save"
-msgstr "Speichern"
+msgid ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
+"[OPTION]...\n"
+" --no-confirmation keine Fragen im MandrakeUpdate Modus stellen\n"
+" --no-verify-rpm Paketsignaturen nicht ĂŒberprĂŒfen\n"
+" --changelog-first Änderungsprotokoll vor Dateiliste anzeigen\n"
+" --merge-all-rpmnew Zusammenlegen aller .rpmnew/.rpmsave Dateien "
+"vorschlagen"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build Backup"
-msgstr "Sicherung erstellen"
+msgid "Setting Default Printer..."
+msgstr "Standarddrucker wÀhlen ..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Restore Progress"
-msgstr "Wiederherstellungs-Fortschritt"
+msgid "Interface %s (using module %s)"
+msgstr "Schnittstelle %s (verwendet Modul %s)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Restore From Catalog"
-msgstr "Wiederherstellen aus Katalog"
+msgid "Name: %s\n"
+msgstr "Name: %s\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Browse to new restore repository."
-msgstr "Zum neuen Wiederherstellungsverzeichnis wechseln"
+msgid "Generating preview ..."
+msgstr "Vorschau erzeugen ..."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "CD in place - continue."
-msgstr "Aktuelle CD - fortfahren."
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
+msgstr ""
+"Die Frequenz sollte entweder eine Mengengeneinheit aus ‚k‘, ‚M‘ und ‚G‘ "
+"nutzen (etwa „2.46G“ fĂŒr 2,46GHz) oder die entsprechende Anzahl Nullen "
+"angehÀngt werden."
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Custom Restore"
-msgstr "BenutzergefĂŒhrte Wiederherstellung"
+msgid "serial"
+msgstr "Seriell"
-#: ../../standalone/drakbackup:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Restore all backups"
-msgstr "Alle Sicherungen wiederherstellen"
+msgid "DVD-ROM"
+msgstr "DVD-ROM"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Failed..."
-msgstr "Wiederherstellen fehlgeschlagen..."
+msgid "Georgian (\"Latin\" layout)"
+msgstr "Georgien (Lateinisches Layout)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Files Restored..."
-msgstr "Dateien wiederhergestellt..."
+msgid "Get the best items with Mandrake Linux Strategic partners"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Path or Module required"
-msgstr "Pfad oder Modul benötigt"
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
+msgstr ""
+"Sie können nun die Optionen fĂŒr Modul %s angeben.\n"
+"Denken Sie daran, dass Adressen mit „0x“ beginnen mĂŒssen, etwa „0x300“"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Hostname required"
-msgstr "Rechnername nötig"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Username required"
-msgstr "Benutzerkennzeichen nötig"
+msgid "Kenya"
+msgstr "Kenia"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Password required"
-msgstr "Passwort nötig"
+msgid "Use ``Unmount'' first"
+msgstr "Verwenden Sie erst „umount“"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Host Path or Module"
-msgstr ""
+msgid "Installing mtools packages..."
+msgstr "Installiere mtools Pakete..."
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Host Name"
-msgstr "Rechnername"
+msgid "You must specify a root partition"
+msgstr "Sie mĂŒssen die Verzeichnisbaumwurzel festlegen"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr "Wiederherstellen mit Netzwerkprotokoll: %s"
+msgid "first step creation"
+msgstr "Erter Schritt Erstellung"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Via Network"
-msgstr "Über Netzwerk wiederherstellen"
+msgid "Both Shift keys simultaneously"
+msgstr "Beide Umschalttasten gleichzeitig"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr ""
+msgid "Select a scanner model"
+msgstr "WĂ€hlen Sie einen Scanner"
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
+msgid "LPRng - LPR New Generation"
+msgstr "LPRng - LPR New Generation"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore From Tape"
-msgstr "Von Band wiederherstellen"
+msgid "Drakbackup Configuration"
+msgstr "DrakBackup Konfiguration"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr ""
+msgid "Save as.."
+msgstr "Speichern unter..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
msgstr ""
+"Diese Schnittstelle wurde noch nicht eingerichtet.\n"
+"Starten Sie den Konfigurationsassistenten im Hauptfenster."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore From CD"
-msgstr "Von CD wiederherstellen"
+msgid "Korea (North)"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup files not found at %s."
-msgstr "Backup-Dateien nicht unter %s gefunden."
+msgid "Autologin"
+msgstr "Autologin"
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Change\n"
-"Restore Path"
-msgstr ""
-"Ändern\n"
-"Pfad wiederherstellen"
+msgid "System configuration"
+msgstr "Systemkonfiguration"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
+msgid "Domain Admin Password"
+msgstr "Paswort des Administrators"
+
+#: ../../share/advertising/05-desktop.pl:1
+#, fuzzy, c-format
msgid ""
-"Restore Selected\n"
-"Files"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
msgstr ""
-"Markierte Dateien\n"
-"wiederherstellen"
+"Mandrake Linux 9.1 bietet 11 Arbeitsumgebungen, die Sie nach Ihren WĂŒnschen "
+"gestalten können, darunter: KDE 3, Gnome 2 und WindowMaker"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Configuring printer ..."
+msgstr "Drucker konfigurieren ..."
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Remove user directories before restore."
-msgstr "Benutzerkennzeichen vor dem Wiederherstellen entfernen."
+msgid "MB"
+msgstr "MB"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
+msgid "if set to yes, run some checks against the rpm database."
msgstr ""
-"Erstelle Sicherung vor dem Wiederherstellen (nur fĂŒr inkrementelle "
-"Sicherungen)."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "select path to restore (instead of /)"
-msgstr "Pfad zum Wiederherstellen auswÀhlen (anstatt /)"
+msgid "Virgin Islands (British)"
+msgstr "Jungferninseln (britisch)"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore Other"
-msgstr "Sonstiges wiederherstellen"
+msgid "Bermuda"
+msgstr "Bermuda"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Restore Users"
-msgstr "Benutzerkennzeichen wiederherstellen"
+msgid "click here if you are sure."
+msgstr "Klicken Sie hier, wenn Sie sicher sind."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore system"
-msgstr "System wiederherstellen"
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
+msgstr ""
+"Keine Konfigurationsdatei gefunde.\n"
+"Bitte wĂ€hlen Sie den „Assistenten“ oder „Erweitert“."
-#: ../../standalone/drakbackup:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Other Media"
-msgstr "Anderes Medium"
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"Sie erhalten die Liste, der auf Ihren Festplatten gefundenen GNU/Linux\n"
+"Partitionen. Sie können die Auswahl des Assistenten beibehalten - sie\n"
+"sollte normalerweise Ihren BedĂŒrfnissen entsprechen. Falls Sie es vorziehen\n"
+"die EinhÀngpunkte selbst zu definieren, denken Sie bitte daran, dass Sie\n"
+"zumindest eine Verzeichnisbaumwurzel („/“) benötigen. WĂ€hlen Sie die\n"
+"Partitionen nicht zu klein, da Sie sonst nicht genĂŒgend Programme\n"
+"installieren können. Wenn Sie Ihre persönlichen Daten auf einer eigenen\n"
+"Partition halten wollen, legen Sie sich eine Partition namens „/home“ an.\n"
+"\n"
+"Die Partitionen werden folgendermaßen aufgelistet: „Name“, „KapazitĂ€t“.\n"
+"\n"
+"„Name“ hat folgende Struktur: „Festplattentyp“, „Festplattennummer“,\n"
+"„Partitionsnummer“ (etwa „hda1“).\n"
+"\n"
+"„Festplattentyp“ ist „hd“, falls Ihre Platte eine IDE/ATAPI-Platte ist, und\n"
+"„sd“, wenn es sich um eine SCSI-Platte handelt.\n"
+"\n"
+"„Festplattennummer“ ist immer der Buchstabe hinter dem Festplattentyp. Bei\n"
+"IDE-Platten bedeutet:\n"
+"\n"
+" * „a“ bedeutet „Master-Platte am primĂ€ren IDE-Controller“;\n"
+"\n"
+" * „b“ bedeutet „Slave-Platte am primĂ€ren IDE-Controller“;\n"
+"\n"
+" * „c“ bedeutet „Master-Platte am sekundĂ€ren IDE-Controller“;\n"
+"\n"
+" * „d“ bedeutet „Slave-Platte am sekundĂ€ren IDE-Controller“;\n"
+"\n"
+"Bei SCSI-Platten steht „a“ fĂŒr „niedrigste SCSI-ID“, „b“ fĂŒr\n"
+"„zweitniedrigste SCSI-ID“, etc."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Select another media to restore from"
-msgstr "WĂ€hlen Sie ein anderes Medium von dem Sie wiederherstellen wollen."
+msgid "Remove"
+msgstr "Entfernen"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the directory where backups are stored"
-msgstr "Bitte geben Sie das Verzeichnis an, in dem die Sicherungskopien liegen"
+msgid "Lesotho"
+msgstr "Lesotho"
-#: ../../standalone/drakbackup:1
+#: ../../ugtk2.pm:1
#, c-format
-msgid "Restore from Hard Disk."
-msgstr "Von Festplatte wiederherstellen"
+msgid "utopia 25"
+msgstr "utopia 25"
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Use quota for backup files."
-msgstr "Quota fĂŒr Backup-Datei verwenden."
+msgid "Pipe job into a command"
+msgstr "Den Auftrag an ein Kommando weiterleiten"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Bitte geben Sie die MaximalgrĂ¶ĂŸe \n"
-"fĂŒr DrakBackup an."
+msgid "new dynamic device name generated by core kernel devfs"
+msgstr "Neuer vom DevFS des Kerns vergebener dynamischer GerÀtename"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Please enter the directory to save:"
-msgstr "Bitte geben Sie das Archivverzeichnis an:"
+msgid "Yes"
+msgstr "Ja"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use Hard Disk to backup"
-msgstr "Auf Festpaltte sichern"
+msgid "Cote d'Ivoire"
+msgstr "ElfenbeinkĂŒste"
-#: ../../standalone/drakbackup:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "please choose the date to restore"
-msgstr "Bitte wÀhlen Sie, welches Datum wiederhergestellt werden soll."
+msgid "Which protocol do you want to use?"
+msgstr "Welches Protokoll wollen Sie verwenden?"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup the system files before:"
-msgstr "Systemdateien sichern vor:"
+msgid "Restore Progress"
+msgstr "Wiederherstellungs-Fortschritt"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
+msgid "Estonia"
+msgstr "Estland"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Choose the host on which the local scanners should be made available:"
msgstr ""
-"Liste wiederherzustellender Kennzeichen (letztes Datum per Kennzeichen ist "
-"wichtig)"
+"WĂ€hlen Sie den Rechner, dem der lokale Scanner bekannt gemacht werden sollen:"
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "OK to restore the other files."
-msgstr "OK, die ĂŒbrigen Dateien zu aktualisieren."
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
+msgstr ""
+"Sie haben einen unbenutzten Bereich in Ihrer Partitionstabelle, \n"
+"den ich nicht ansprechen kann. Die einzige Lösung ist, dass Sie \n"
+"Ihre primÀren Partitionen so verschieben, dass der Bereich direkt \n"
+"neben der erweiterten Partition zu liegen kommt."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " Restore Configuration "
-msgstr " Konfiguration wiederherstellen "
+msgid "Channel"
+msgstr "Kanal"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid " Successfuly Restored on %s "
-msgstr " erfolgreich auf %s wiederhergestellt "
+msgid "Add"
+msgstr "HinzufĂŒgen"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid " All of your selected data have been "
-msgstr " Alle Ihre gewÀhlten Daten wurden "
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "Teilen der Internetverbindung wurde noch nicht konfiguriert."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup files are corrupted"
-msgstr "Die Sicherungen sind beschÀdigt."
+msgid " Error while sending mail. \n"
+msgstr " Fehler beim Verschicken der E-Mail. \n"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr ""
-"Bitte entfernen Sie die Markierung oder löschen Sie sie das nÀchste Mal."
+msgid "Keyboard"
+msgstr "Tastatur"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"List of data corrupted:\n"
-"\n"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-"Liste der beschÀdigten Daten:\n"
-"\n"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"List of data to restore:\n"
-"\n"
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
msgstr ""
-"Liste der wiederherzustellenden Daten:\n"
-"\n"
+"Die Rate sollte entweder eine Mengengeneinheit aus ‚k‘, ‚M‘ und ‚G‘ nutzen "
+"(etwa „11M“ fĂŒr 11M) oder die entsprechende Anzahl Nullen angehĂ€ngt werden."
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-"Keine Konfiguration. WĂ€hlen Sie dein Assistenten oder Fortgeschritten.\n"
+msgid "Choose the connection you want to configure"
+msgstr "WĂ€hlen Sie die Verbindung, die Sie konfigurieren wollen"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "\t-Network by webdav.\n"
-msgstr "\t- Netzwerk per webdav.\n"
+msgid "Please wait, setting security level..."
+msgstr "Bitte warten, Sicherheitsebene wird eingestellt..."
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t- Netzwerk per rsync.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
+msgstr "Mandrake Linux 9.1 ist die ultimative Entwicklungsplattform."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\t- Netzwerk per SSH.\n"
+msgid "Configuring network device %s"
+msgstr "Konfigurieren der Netzwerkkarte %s"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\t- Netzwerk per FTP.\n"
+msgid "activated"
+msgstr "aktiviert"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "\t-Tape \n"
+msgid "Please choose which network interface will be used for the dhcp server."
msgstr ""
+"Bitte wĂ€hlen Sie, welches NetzwerkgerĂ€t fĂŒr den DHCP-Server verwendet wird."
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-CDROM.\n"
-msgstr "\t- CD-ROM.\n"
+msgid "Finding packages to upgrade..."
+msgstr "Finden der zu aktualisierenden Pakete ..."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t- Festplatte.\n"
+msgid "Mount point: "
+msgstr "EinhÀngpunkt: "
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
-msgstr ""
-"\n"
-"- DÀmon (%s) enthÀlt:\n"
+msgid "parse all fonts"
+msgstr "Alle Schriften analysieren"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tSicherungen verwenden „tar“ und „gzip“\n"
+msgid "With X"
+msgstr "Mit X"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tSicherungen verwenden „tar“ und „bzip2“\n"
+msgid "Multi-head configuration"
+msgstr "Mehrmonitor-Einstellung"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "\tDo not include System Files\n"
-msgstr "\tKeine Systemdateien\n"
+msgid "No browser available! Please install one"
+msgstr "Kein Browser installiert! Bitte installieren Sie einen."
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
"\n"
-"- Options:\n"
+"%s"
msgstr ""
+"Die Änderungen beibehalten?\n"
+"Momentan wÀre dies:\n"
"\n"
-"- Optionen:\n"
+"%s"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
msgstr ""
-"\t\t Benutzer: %s\n"
-"\t\t Pfad: %s \n"
+"Sie können ReiserFS nicht fĂŒr Partitionen verwenden, die kleiner als 32MB "
+"sind!"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"- Save via %s on host: %s\n"
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
-"\n"
-"- via %s auf Rechner %s sichern\n"
+"Der Dienst rwho erlaubt es Benutzern entfernter Rechner eine Liste\n"
+"momentan angemeldeter Benutzerkennzeichen ĂŒbermittelt zu bekommen \n"
+"(Ă€hnlich wie finger)."
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "\t\tErase=%s"
-msgstr ""
+msgid "Domain name"
+msgstr "Name der DomÀne"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Sharing of local printers"
+msgstr "Gemeinsamer Zugriff auf lokale Drucker"
+
+#: ../../install_messages.pm:1
+#, fuzzy, c-format
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgstr "http://www.mandrakelinux.com/en/90errata.php3"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Available printers"
+msgstr "Vorhandene Drucker"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Empty"
+msgstr "Leer"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
-"- Save to Tape on device: %s"
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
+"\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
+"\n"
+"\n"
+"\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
+"X (das X Window System) ist das Herz der grafischen BenutzeroberflÀche von\n"
+"GNU/Linux. Es bildet die Grundlage fĂŒr die Vielzahl grafischer\n"
+"Benutzerumgebungen, die Mandrake Linux Ihnen anbietet (wie etwa KDE, GNOME,\n"
+"AfterStep oder WindowMaker). Auch hier wird „DrakX“ die Konfiguration\n"
+"soweit wie möglich selbststÀndig vollziehen.\n"
"\n"
-"- Auf Band an GerÀt %s sichern"
+"Sie erhalten eine Liste möglicher Parameter, mit deren Hilfe Sie die\n"
+"Grafikausgabe Àndern können:\n"
+"\n"
+"Grafikkarte\n"
+"\n"
+" DrakX erkennt normalerweise automatisch Ihre Grafikkarte und richtet sie\n"
+"entsprechend ein. Sollten dabei Probleme auftreten, können Sie in der hier\n"
+"aufgefĂŒhrten Liste Ihr Modell auswĂ€hlen.\n"
+"\n"
+" Falls fĂŒr Ihre Karte verschiedene Server zur VerfĂŒgung stehen, etwa mit\n"
+"und ohne 3D-Beschleunigung, werden Sie gebeten, den zu wÀhlen, der Ihren\n"
+"BedĂŒrfnissen am besten entspricht.\n"
+"\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+" DrakX erkennt normalerweise automatisch Ihren Monitor. Sollten dabei\n"
+"Probleme auftreten, können Sie in der hier aufgefĂŒhrten Liste Ihr Modell\n"
+"auswÀhlen.\n"
+"\n"
+"\n"
+"\n"
+"Auflösung\n"
+"\n"
+" Sie können hier Auflösung und Farbtiefe fĂŒr Ihre Hardware wĂ€hlen.\n"
+"Entscheiden Sie sich, welche Variante Ihren WĂŒnschen am ehesten entspricht\n"
+"(Sie können diese Angaben natĂŒrlich nach der Installation noch Ă€ndern). Sie\n"
+"können sich einen Eindruck anhand des abgebildeten Monitors bilden.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" DrakX versucht eine Testbild mit denen von Ihnen gewĂŒnschten\n"
+"Einstellungen zu öffnen. Falls Sie wÀhrend des Tests einen Dialog sehen, in\n"
+"dem Sie gefragt werden, ob sie die getroffenen Einstellungen behalten\n"
+"wollen, antworten Sie mit „%s“, damit DrakX mit dem nĂ€chsten\n"
+"Installationsschritt fortfÀhrt. Sollten Sie die Nachricht nicht sehen,\n"
+"bedeutet das, dass eine oder mehrere getroffene Einstellungen nicht korrekt\n"
+"sind. Nach 12 Sekunden sollten Sie wieder das InstallationsmenĂŒ sehen. Sie\n"
+"können nun die Einstellungen Àndern, bis Sie das Testbild sehen.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Sie können direkt bei Betriebssystemstart die grafische Umgebung\n"
+"aktivieren. Durch betĂ€tigen der SchaltflĂ€che „%s“ wird in eine reine\n"
+"Textumgebung gestartet. Das ist sinnvoll fĂŒr Server oder wenn Sie bei dem\n"
+"Versuch die grafische Umgebung zu konfigurieren erfolglos waren. WĂ€hlen Sie\n"
+"„%s“, um die grafische Umgebung vorzufinden."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid " (multi-session)"
+msgid "text width"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid " on device: %s"
-msgstr " an GerÀt: %s"
+msgid "Where do you want to mount device %s?"
+msgstr "Wo wollen Sie das GerÀt %s einhÀngen?"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "RW"
-msgstr ""
+msgid "The default lease (in seconds)"
+msgstr "Standard-IP-Verleihdauer (in Sekunden)"
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"- Burn to CD"
-msgstr ""
+msgid "Interface \"%s\""
+msgstr "Schnittstelle: „%s“"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
+msgid "With basic documentation (recommended!)"
+msgstr "Mit minimaler Dokumentation (Empfohlen)"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
-"\n"
-"- Auf Festplatte sichern unter: %s\n"
+msgid "1 button"
+msgstr "1 Taste"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"- Other Files:\n"
+"There are %d unknown printers directly connected to your system"
msgstr ""
"\n"
-"- Sonstige Dateien:\n"
+"Ich konnte %d unbekannte Drucker direkt an Ihrem Rechner finden."
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Benutzerdateien:\n"
+msgid "Test"
+msgstr "Test"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"- System Files:\n"
+"Allow/Forbid direct root login."
msgstr ""
-"\n"
-"- Systemdateien:\n"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Sicherungsquellen: \n"
+msgid "Korea"
+msgstr "Korea"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Select user manually"
-msgstr "Benutzerkennzeichen auswÀhlen"
+msgid "Your choice? (default `%s'%s) "
+msgstr "Ihre Wahl? (Standard „%s“ %s) "
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Backup Users"
-msgstr "Benutzerkennzeichen sichern"
+msgid "Raw printer"
+msgstr "Rohdaten-Drucker"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Backup system"
-msgstr "System sichern"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "official vendor name of the cpu"
+msgstr "Offizieller Herstellername der CPU"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Please choose what you want to backup"
-msgstr "Bitte wÀhlen Sie, was Sie sichern wollen"
+msgid "Vendor"
+msgstr "Hersteller"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "on Tape Device"
-msgstr ""
+msgid "Interface %s"
+msgstr "Schnittstelle: %s"
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "on CDROM"
-msgstr ""
+msgid "Configure mouse"
+msgstr "Maus konfigurieren"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "across Network"
-msgstr "ĂŒber Netzwerk"
+msgid "Choose the mount points"
+msgstr "WÀhlen Sie die EinhÀngpunkte"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "on Hard Drive"
-msgstr "auf Festplatte"
+msgid "OK"
+msgstr " Ok "
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please choose where you want to backup"
-msgstr "Bitte wÀhlen Sie wohin Sie die Sicherungskopien machen wollen."
+msgid "Yugoslavian (latin)"
+msgstr "Jugoslawien (Lateinisches Layout)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "More Options"
-msgstr "Mehr Parameter"
+msgid "Installing"
+msgstr "Installation wird durchgefĂŒhrt"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "When"
-msgstr "Wann"
+msgid "Launch userdrake"
+msgstr "Userdrake starten"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Where"
-msgstr "Wo"
+msgid "Is this an install or an upgrade?"
+msgstr "Handelt es sich um eine Installation oder eine Aktualisierung?"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "ISDN card"
+msgstr "Interne ISDN Karte"
+
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "What"
-msgstr "Was"
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
+msgstr ""
+"Beteiligen Sie sich an den Diskussionsforen, die Sie auf unseren „Community“-"
+"Seiten finden, um Ihre wissen mit Anderen zu teilen."
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
+msgid ""
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
+"\n"
msgstr ""
+"Herzlichen GlĂŒckwunsch, die Netzwerk-/Internet-Einrichtung ist beendet.\n"
+"\n"
+"Die Konfiguration wird nun in Ihr System integriert.\n"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Send mail report after each backup to:"
-msgstr "E-Mail Bericht nach jedem Sicherungsvorgang an: "
+msgid "\t-Hard drive.\n"
+msgstr "\t- Festplatte.\n"
-#: ../../standalone/drakbackup:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
"\n"
-"Note that currently all 'net' medias also use the hard drive."
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
-"Stellen Sie sicher, dass der Cron-DĂ€mon als Dienst aktiviert ist.\n"
+"Dieser Schritt wird nur aufgerufen, wenn mindestens eine GNU/Linux\n"
+"Partition auf Ihren Festplatten gefunden wird.\n"
"\n"
-"Beachten Sie, dass zur Zeit alle \"Netzmedien\" auch die Festplatte "
-"verwenden."
+"DrakX fragt Sie nun nach der gewĂŒnschten Installationsart. Sie haben die\n"
+"Wahl zwischen einer Aktualisierung einer bereits vorhandenen Mandrake\n"
+"Linux-Version oder einer kompletten Neuinstallation:\n"
+"\n"
+" * „%s“: Entfernt komplett Ă€ltere Versionen von Mandrake Linux, die noch\n"
+"installiert sind - um genau zu sein, können Sie je nach aktuellem Inhalt\n"
+"Ihrer Platte auch einige Àltere Linux- oder anderweitige Partitionen\n"
+"unangetastet behalten.\n"
+"\n"
+" * „%s“: Mit dieser Variante können Sie eine existierende Mandrake Linux\n"
+"Version aktualisieren. Die Partitionstabellen sowie die persönlichen\n"
+"Verzeichnisse der Anwender bleiben erhalten. Alle anderen\n"
+"Installationsschritte werden wie bei einer Installation ausgefĂŒhrt.\n"
+"\n"
+"Aktualisierungen von Mandrake Linux „8.1“ oder neueren Systemen sollten\n"
+"problemlos funktionieren. Ältere Versionen von Mandrake Linux sollten Sie\n"
+"nicht zu aktualisieren versuchen."
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Bitte wÀhlen Sie ein\n"
-"Sicherungsmedium."
+msgid "Printer on remote CUPS server"
+msgstr "Drucker an CUPS-Server auf der Gegenseite"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Bitte wÀhlen Sie das Zeitintervall \n"
-"zwischen zwei Sicherungen."
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgstr "Fehler beim Entfernen von „%s“ fĂŒr StarOffice/OpenOffice.org/GIMP."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Use daemon"
-msgstr "DĂ€mon verwenden"
+msgid "delete"
+msgstr "löschen"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "monthly"
-msgstr "monatlich"
+msgid "here if no."
+msgstr "Hier, falls nicht."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "DHCP host name"
+msgstr "Rechnername"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid "weekly"
-msgstr "wöchendlich"
+msgid "The maximum lease (in seconds)"
+msgstr "Maximale IP-Verleihdauer (in Sekunden)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "daily"
-msgstr "tÀglich"
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "Bitte wÀhlen Sie den seriellen Anschluss, an dem Ihre Maus hÀngt."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "hourly"
-msgstr "stĂŒndlich"
+msgid "Did it work properly?"
+msgstr "War der Ausdruck korrekt?"
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
#, c-format
-msgid "HardDrive / NFS"
-msgstr "Festplatte/NFS"
+msgid "Poor"
+msgstr "Schwach"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "CDROM / DVDROM"
+msgid "The DHCP start range"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the directory to save to:"
-msgstr "Bitte geben Sie das Archivverzeichnis an:"
+msgid "Grenada"
+msgstr "Grenada"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr "Geben Sie an, ob sie Ihr Band nach dem Backup auswerfen wollen."
+msgid "Unsafe"
+msgstr "Unsicher"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr "Geben Sie an, ob sie Ihr Band vor dem Backup löschen wollen."
+msgid ", %s sectors"
+msgstr ", %s Sektoren"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "Geben Sie an, ob sie das nicht-zurĂŒckspulende GerĂ€t verwenden wollen."
+msgid "No"
+msgstr "Nein"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please enter the device name to use for backup"
-msgstr "Bitte geben Sie den GerĂ€tenamen fĂŒr Archivierung an."
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use tape to backup"
-msgstr "Auf Bandlaufwerk sichern"
+msgid "Guadeloupe"
+msgstr "Gouadeloupe"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "No CD device defined!"
-msgstr "Kein CD-GerÀt angegeben!"
+msgid "could not find any font.\n"
+msgstr "Konnte keine Schriften finden.\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Bitte geben Sie den GerÀtenamen \n"
-"Ihres Brenners an, etwa „0,1,0“."
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "Wollen Sie, dass die RĂŒcktaste auf den Konsolen Entfernen sendet?"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "Geben Sie an, ob sie ein DVDRAM-GerÀt verwenden"
+msgid "Vertical refresh rate"
+msgstr "Vertikale Wiederholfrequenz"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
#, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "Geben Sie an, ob sie ein DVDR-GerÀt verwenden"
+msgid "Entering step `%s'\n"
+msgstr "Beginn von Schritt „%s“\n"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid " Erase Now "
-msgstr " Jetzt löschen"
+msgid "Logitech MouseMan"
+msgstr "Logitech MausMan/FirstMaus"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "Geben Sie an, ob sie Ihr RW-Medium löschen wollen (erste Sitzung)"
+msgid "Removing %s ..."
+msgstr "Entferne %s ..."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "Kontrollieren Sie, ob Sie ein CDRW-Medium verwenden."
+msgid "Niger"
+msgstr "Niger"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Please check for multisession CD"
-msgstr "fĂŒr Multisession-CD markieren"
+msgid "No printer"
+msgstr "Kein Drucker"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "Bitte wĂ€hlen Sie die GrĂ¶ĂŸe des CD/DVD Mediums (MByte)"
+msgid "alert configuration"
+msgstr "Benachrichtigungskonfiguration"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
-msgstr ""
+msgid "NetWare Printer Options"
+msgstr "Optionen fĂŒr NetWare-Drucker"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Use CD/DVDROM to backup"
-msgstr "Sicherungskopie auf CD/DVDROM"
+msgid "%s BootSplash (%s) preview"
+msgstr "%s BootSplash (%s) Vorschau"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Need hostname, username and password!"
-msgstr "Brauche Rechnername, Nutzername und Passwort!"
+msgid "General"
+msgstr "Allgemein"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remember this password"
-msgstr "Passwort behalten"
+msgid "Printing system: "
+msgstr "Drucksystem: "
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please enter your password"
-msgstr "Bitte geben Sie Ihr Passwort ein"
+msgid "Add a user"
+msgstr "Benutzer hinzufĂŒgen"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please enter your login"
-msgstr "Bitte geben Sie Ihr Benutzerkennzeichen ein"
+msgid "Network configuration (%d adapters)"
+msgstr "Netzwerk Konfiguration (%d Karten)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
-msgstr ""
-"Bitte geben Sie das Verzeichnis (oder Modul) an,\n"
-" in dem die Archive auf diesem Rechner erstellt werden sollen."
+msgid "Mandatory package %s is missing"
+msgstr "Das zwingend benötigte Paket „%s“ fehlt."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the host name or IP."
-msgstr "Rechnernamen oder IP eingeben."
+msgid "Philippines"
+msgstr "Philippinen"
-#: ../../standalone/drakbackup:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
#, c-format
-msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
-msgstr ""
+msgid "Ok"
+msgstr "OK"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-" Transfer \n"
-"Now"
-msgstr ""
-" Übertragung \n"
-"Jetzt"
+msgid "Print Queue Name"
+msgstr "Name der Druckerwarteschlange"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "Möchten Sie „aboot“ verwenden?"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "Weißrussland"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
msgstr ""
+"PDQ unterstĂŒtzt nur lokale Drucker, entfernte LPD Drucker und Socket/TCP "
+"Drucker.\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Use Expect for SSH"
-msgstr ""
+msgid "Move files to the new partition"
+msgstr "Dateien auf die neue Partition verschieben."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Net Method:"
+msgid ""
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use network connection to backup"
-msgstr "Netzwerkverbindung zur Datensicherung verwenden"
+msgid "Restore From Catalog"
+msgstr "Wiederherstellen aus Katalog"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Users"
-msgstr "Benutzer"
+msgid "Pitcairn"
+msgstr "Pitcairn"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
+msgid "IDE"
+msgstr "IDE"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr "Inkrementelle Archivierung (alte Archive nicht ersetzen)"
+msgid "group :"
+msgstr "Gruppe :"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../fs.pm:1
#, c-format
-msgid "Remove Selected"
-msgstr "Markierte entfernen"
+msgid "mounting partition %s in directory %s failed"
+msgstr "Das EinhÀngen der Partition %s in das Verzeichnis %s schlug fehl."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Do not include the browser cache"
-msgstr "Die Browser-Caches nicht archivieren."
+msgid "Lilo screen"
+msgstr "LILO-MenĂŒ"
-#: ../../standalone/drakbackup:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr ""
-"Bitte wÀhlen Sie alle Kennzeichen, deren Dateinen mitgesichert werden sollen."
+msgid "LILO with graphical menu"
+msgstr "LILO mit grafischem MenĂŒ"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
+msgid "Estimating"
+msgstr "SchÀtzung"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "You can't unselect this package. It is already installed"
msgstr ""
-"Mit dieser Option sind Sie in der Lage, jede Version Ihres \n"
-"„/etc“ Verzeichnisses wiederherzustellen."
+"Sie können dieses Paket nicht aus der Auswahl entfernen. \n"
+"Es ist bereits installiert!"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Keine kritischen Dateien (passwd, group, fstab)"
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr ", Drucker „%s“ an SMB/Windows Server „%s“"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use incremental backup (do not replace old backups)"
-msgstr "Inkrementelles Backup (alte Backups nicht ĂŒberschreiben)"
+msgid "Go on anyway?"
+msgstr "Wollen Sie trotzdem fortfahren?"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Sichern Ihrer Systemdateien (Verzeicnis /etc)."
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "Suche nach vorhandenen Paketen und aktualisieren der RPM-Datenbank ..."
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
+msgid "Does not appear to be recordable media!"
msgstr ""
-"Diese Optionen kön alle Ihre Dateien im Verzeichnis „/etc“ sichern und "
-"wiederherstellen\n"
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "Specify options"
+msgstr "Optionen angeben"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Vanuatu"
+msgstr "Vanuatu"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Either the server name or the server's IP must be given!"
+msgstr "Sie mĂŒssen entweder Den Servernamen oder seine IP-Adresse angeben!"
+
+#: ../../any.pm:1
#, c-format
msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
"\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
msgstr ""
+"Mit einer individuellen Startdiskette können Sie Ihr LINUX-System starten, \n"
+"ohne auf einen Betriebssystemstarter angewiesen zu sein. Dies ist "
+"nĂŒtzlich, \n"
+"wenn Sie SILO nicht auf Ihrem System installieren möchten, wenn ein \n"
+"anderes Betriebssystem SILO entfernt hat oder Ihre Hardware-Konfiguration \n"
+"die Verwendung eines BS-Starters nicht korrekt verarbeitet. \n"
+"Eine individuelle Startdiskette kann auch in Verbindung mit der \n"
+"Mandrake Linux Rettungsdiskette verwendet werden, wodurch das System \n"
+"nach schwerwiegenden Fehlern viel einfacher wiederhergestellt werden \n"
+"kann.\n"
"\n"
-"Bitte wÀhlen Sie alle benötigten Parameter.\n"
+"Falls Sie eine Startdiskette erstellen wollen, legen Sie eine Diskette \n"
+"ohne relevante Daten in ihr erstes Laufwerk und drĂŒcken Sie „OK“."
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Select the files or directories and click on 'Add'"
+msgid "You can't use an encrypted file system for mount point %s"
msgstr ""
-"WÀhlen Sie die Dateien oder Verzeichnisse und betÀtigen Sie die SchaltflÀche "
-"„HinzufĂŒgen“"
+"Sie können kein verschlĂŒsseltes Medium fĂŒr den EinhĂ€ngpunkt %s verwenden."
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "File Selection"
-msgstr "Dateiauswahl"
+msgid "Norfolk Island"
+msgstr "Norfolkinsel"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Can't create catalog!"
-msgstr ""
+msgid "Theme installation failed!"
+msgstr "Die Installation des Themas schlug fehl!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid " Error while sending mail. \n"
-msgstr " Fehler beim Verschicken der E-Mail. \n"
+msgid "Nothing to do"
+msgstr "Nichts zu tun."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
+msgid "Use for loopback"
+msgstr "Als Loopback verwenden"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
+msgid "Mandrake Bug Report Tool"
+msgstr "Mandrake BugReport Werkzeug"
+
+#: ../../network/adsl.pm:1
+#, c-format
+msgid "use pppoe"
+msgstr "PPPOE verwenden"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving files to the new partition"
+msgstr "Dateien auf die neue Partition verschieben."
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s mit EXPERIMENTELLER 3D-Hardwarebeschleunigung"
+
+#: ../../help.pm:1 ../../interactive.pm:1
+#, c-format
+msgid "Advanced"
+msgstr "Fortgeschritten"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transfer"
+msgstr "Übertragen"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak (Schweden)"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
+msgid "More Options"
+msgstr "Mehr Parameter"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Afghanistan"
+msgstr "Afghanistan"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
+msgid "Delete Hard Drive tar files after backup to other media."
msgstr ""
-"\n"
-" FTP Verbindungsproblem: Es war nicht möglich, Ihre Dateien per FTP zu "
-"ĂŒbertragen.\n"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"file list sent by FTP: %s\n"
-" "
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
msgstr ""
-"Dateiliste gesendet per FTP: %s\n"
-" "
+"Der Befehl cron wird unter UNIX/Linux dazu verwendet, Benutzerprogramme \n"
+"zu vordefinierten regelmĂ€ĂŸigen Zeiten abzuarbeiten. \n"
+"Der Dienst vixie cron erweitert dieses Konzept um weitere Funktionen, etwa \n"
+"ein verbessertes Sicherheitskonzept und einfachere Konfiguration."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "No changes to backup!"
-msgstr "Keine Änderungen zu sichern!"
+msgid "Burundi"
+msgstr "Burundi"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Backup-Dateien auf der Festplatte ..."
+msgid "Add Client -->"
+msgstr "Klient hinzufĂŒgen -->"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Backup Other files..."
-msgstr "Andere Dateien sichern ..."
+msgid "Read carefully!"
+msgstr "Lesen Sie bitte aufmerksam!"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "Festplattenbackup in Bearbeitung ..."
+msgid "RW"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Backup User files..."
-msgstr "Benutzerdateien sichern ..."
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
+msgstr "Bitte geben Sie Ihre Fernsehnorm und Region ein"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Backup system files..."
-msgstr "Systemdateien sichern ..."
+msgid "Port"
+msgstr "Port"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "No tape in %s!"
+msgid "No (experts only)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Permission problem accessing CD."
-msgstr ""
+msgid "No kernel selected!"
+msgstr "Kein Kern ausgewÀhlt!"
-#: ../../standalone/drakbackup:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "This may take a moment to erase the media."
-msgstr ""
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Zum Starten des BS drcken Sie <Return>. Mit <e> k”nnen Sie das"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Not erasable media!"
+msgid "Set-GID"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr ""
+msgid "The encryption keys do not match"
+msgstr "Die Passwörter stimmen nicht ĂŒberein"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Right \"Windows\" key"
+msgstr "Rechte „Windows“-Taste"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "No CDR/DVDR in drive!"
+msgid "CDROM / DVDROM"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "WebDAV transfer failed!"
+msgid "if set to yes, check empty password in /etc/shadow."
msgstr ""
-#: ../../standalone/drakbackup:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
+msgstr ""
+"Lesen Sie bitte aufmerksam die Lizenz, bevor Sie fortfahren. Sie umfasst\n"
+"die gesamte Mandrake Linux Distribution. Sollten Sie nicht in allen Punkten\n"
+"zustimmen, betĂ€tigen Sie bitte die SchaltflĂ€che „%s“, um die Installation\n"
+"abzubrechen. Um mit der Installation fortzufahren, betÀtigen Sie die\n"
+"SchaltflĂ€che „%s“."
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "WebDAV remote site already in sync!"
+msgid ""
+"Here is a list of the available printing options for the current printer:\n"
+"\n"
msgstr ""
+"Hier die Liste vorhandener Drucker-Parameter des aktuellen Druckers:\n"
+"\n"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Total progess"
-msgstr "Fortschritt"
+msgid "Resolutions"
+msgstr "Auflösungen"
-#: ../../standalone/drakbackup:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
+"drakfirewall configurator\n"
"\n"
-"without being prompted for a password."
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
msgstr ""
+"DrakFirewall Konfigurierer\n"
+"\n"
+"Hiermit konfigurieren Sie eine persönliche Firewall fĂŒr diesen\n"
+"Mandrake Linux Rechner. Sollten Sie an einer speziellen ausgereiften\n"
+"Firewall-Lösung interessiert sein, schauen Sie sich nach der speziell\n"
+"dafĂŒr entwickelten MandrakeSecurity Firewall Distribution um."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "%s not responding"
+msgid ""
+"Please enter your username, password and domain name to access this host."
msgstr ""
+"Bitte geben Sie Benutzerkennzeichen, Passwort und DomÀne des Rechners an."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Can't find %s on %s"
-msgstr ""
+msgid "Remove selected host"
+msgstr "Löschen des markierten Rechners"
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr ""
+msgid "Network configuration"
+msgstr "Netzwerk Konfiguration"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Bad password on %s"
-msgstr "Schlechtes Passwort auf %s"
+msgid "No sharing"
+msgstr "Kein Teilen"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "No password prompt on %s at port %s"
+msgid "Move selected rule down one level"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "ERROR: Cannot spawn %s."
-msgstr ""
+msgid "TB"
+msgstr "TB"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr ""
+msgid "Please check if you are using a DVDR device"
+msgstr "Geben Sie an, ob sie ein DVDR-GerÀt verwenden"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
+msgid "FATAL"
+msgstr "FATAL"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
"\n"
-" DrakBackup Report Details\n"
-"\n"
+"The network address is %s using a netmask of %s.\n"
"\n"
msgstr ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Delete"
+msgstr "Löschen"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"Allow/Forbid reboot by the console user."
msgstr ""
-"\n"
-" DrakBackup DĂ€mon Report\n"
-"\n"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
msgstr ""
-"\n"
-" DrakBackup Report \n"
-"\n"
+"Ich kann GNU/Linux so einrichten, dass bei jedem Systemstart\n"
+"automatisch die grafische OberflÀche (= der X Server) aktiviert wird.\n"
+"Wollen Sie, dass X nach jedem Neustart direkt zur VerfĂŒgung steht?"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "INFO"
-msgstr "INFO"
+msgid "Build the disk"
+msgstr " Diskette erstellen "
-#: ../../standalone/drakbackup:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "FATAL"
-msgstr "FATAL"
+msgid "Disconnect %s"
+msgstr "Trenne %s"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "WARNING"
-msgstr ""
+msgid "Status:"
+msgstr "Status:"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Cron not available yet as non-root"
-msgstr ""
+msgid "HTTP proxy"
+msgstr "HTTP Proxy"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Die Installation von %s schlug Fehl. Folgender Fehler trat auf:"
+msgid "SSH Server"
+msgstr "SSH Server"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No, I don't want autologin"
-msgstr "Nein ich will kein Autologin"
+msgid "\t-Network by rsync.\n"
+msgstr "\t- Netzwerk per rsync.\n"
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ja ich will Autologin mit diesem Kennzeichen und dieser OberflÀche"
+msgid "European protocol"
+msgstr "EuropÀisches Protokoll"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "X-Window nach dem Hochfahren automatisch starten "
+msgid ", printer \"%s\" on server \"%s\""
+msgstr ", Drucker „%s“, auf Server „%s“"
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
#, c-format
-msgid "System mode"
-msgstr "System-Modus"
+msgid "Error"
+msgstr "Fehler"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Bootsplash"
-msgstr "Startschirm"
+msgid "allow \"su\""
+msgstr "„su“ erlauben"
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Lilo screen"
-msgstr "LILO-MenĂŒ"
+msgid "Australia"
+msgstr "Australien"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
-"\n"
-"WĂ€hlen Sie sich\n"
-"das Aussehen von\n"
-"LILO und dem\n"
-"Startschirm.\n"
-"Sie können\n"
-"unterschiedliche\n"
-"Varianten wÀhlen."
+msgid "please wait during ttmkfdir..."
+msgstr "Bitte warten Sie ttmkfdir arbeitet ..."
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Themes"
-msgstr "Themen"
+msgid "Configure only card \"%s\"%s"
+msgstr "Nur Karte „%s“ (%s) konfigurieren"
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Splash selection"
-msgstr "Startschirmauswahl"
+msgid "Level"
+msgstr "Ebene"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Sie verwenden momentan „%s“ als Betriebssystemstarter.\n"
-"WĂ€hlen Sie „Konfigurieren“, wenn Sie den Assistenten starten wollen."
+msgid "Change the printing system"
+msgstr "Drucksystem Àndern"
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr "Installation des LILO- und Start-Themas erfolgreich."
+msgid ""
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
+msgstr ""
+"Ihr System unterstĂŒtzt die gleichzeitige Verwendung mehrerer Monitore.\n"
+"Was wollen Sie?"
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
#, c-format
-msgid "Theme installation failed!"
-msgstr "Die Installation des Themas schlug fehl!"
+msgid "Configure services"
+msgstr "Dienste konfigurieren"
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Notice"
-msgstr "Anmerkung"
+msgid "Broadcast Address:"
+msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Relaunch 'lilo'"
-msgstr "LILO ausfĂŒhren"
+msgid "mount failed: "
+msgstr "Fehler beim EinhÀngen: "
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
msgstr ""
-"Ich kann LILO nicht ausfĂŒhren!FĂŒhren Sie bitte mit dem privilegierten "
-"Benutzerkennzeichen „lilo“ in einer Konsole aus, um die Themen-Installation "
-"zu beenden."
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
-msgstr "Erstellen der RamDisk: „mkinitrd -f /boot/initrd-%s.img %s“."
+msgid "Image"
+msgstr "Kern"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr "Ich kann „mkinitrd -f /boot/initrd-%s.img %s“ nicht ausfĂŒhren."
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
+msgstr "Fehler beim HinzufĂŒgen von „%s“ fĂŒr StarOffice/OpenOffice.org/GIMP."
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
+#, c-format
+msgid "Remote Administration"
+msgstr "Fernwartung"
+
+#: ../../modules.pm:1
#, c-format
msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
-msgstr "Ich kann „/etc/sysconfig/bootsplash“ nicht anlegen."
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+msgstr ""
+"Die PCMCIA-UnterstĂŒtzung fĂŒr 2.2er Kerne wurde eingestellt. Verwenden Sie "
+"bitte einen 2.4er Kern."
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Write %s"
-msgstr "Schreiben von %s"
+msgid "Selected All"
+msgstr "Alle auswÀhlen"
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr "Ich kann „/etc/sysconfig/bootsplash“ nicht anlegen."
+msgid "CUPS - Common Unix Printing System"
+msgstr "CUPS - Common Unix Printing System"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Lilo message not found"
-msgstr "Ich kann die LILO Nachricht nicht finden."
+msgid "Webmin Service"
+msgstr "Webmin"
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Copy %s to %s"
-msgstr "Kopiere „%s“ nach „%s“"
+msgid "device"
+msgstr "GerÀt"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Backup %s to %s.old"
-msgstr "Anlegen einer Sicherheitskopie von „%s“ unter „%s.old“."
+msgid "All"
+msgstr "Alle"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create new theme"
-msgstr "Ein neues Thema erzeugen"
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "Welches Drucksystem (Spooler) wollen Sie verwenden?"
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"Bildschirm-Thema\n"
-"fĂŒr die Konsole"
+msgid "Greece"
+msgstr "Griechenland"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Install themes"
-msgstr "Themen installieren"
+msgid "An error occurred"
+msgstr "Es ist ein Fehler aufgetreten"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Lilo/grub mode"
-msgstr "LILO/GRUB Modus"
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
+msgstr ""
+"Dieses Paket muss aktualisiert werden.\n"
+"Sind Sie sicher, dass Sie es aus der Auswahl entfernen wollen?"
-#: ../../standalone/drakboot:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Yaboot mode"
-msgstr "Yaboot Modus"
+msgid "Tamil (Typewriter-layout)"
+msgstr "Tamilisch (Schreibmaschine)"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
+msgid "manual"
+msgstr ""
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/File/_Quit"
-msgstr "/Datei/B_eenden"
+msgid "Printer manufacturer, model, driver"
+msgstr "Druckerproduzent, Modell, Treiber"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "/_File"
-msgstr "/_Datei"
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"In Laufwerk %s liegt kein Medum oder es ist schreibgeschĂŒtzt.\n"
+"Bitte legen Sie eins ein."
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Style Configuration"
-msgstr "Konfiguration der Boot-Einstellungen"
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
+msgstr ""
+"Das Verzeichnis „%s“ enthĂ€lt bereits Daten\n"
+"(%s)"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "No browser available! Please install one"
-msgstr "Kein Browser installiert! Bitte installieren Sie einen."
+msgid "Printer on NetWare server"
+msgstr "Drucker an NetWare Server"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "connecting to Bugzilla wizard ..."
-msgstr ""
+msgid "Give the ram size in MB"
+msgstr "Geben Sie die RAM GrĂ¶ĂŸe in MB an"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Package not installed"
-msgstr "Paket nicht installiert"
+msgid "Real name"
+msgstr "Benutzername"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Not installed"
-msgstr "Nicht installiert"
+msgid "done"
+msgstr "Fertig"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Standalone Tools"
-msgstr "EingenstÀndige Werkzeuge"
+msgid "Please uncheck or remove it on next time."
+msgstr ""
+"Bitte entfernen Sie die Markierung oder löschen Sie sie das nÀchste Mal."
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Report"
-msgstr "Report"
+msgid "Higher"
+msgstr "Höher"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the partitions you want to format"
+msgstr "Zu formatierende Partitionen auswÀhlen"
+
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
+"\n"
"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Release: "
-msgstr "Ausgabe:"
+msgid "Can't find %s on %s"
+msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Kernel:"
-msgstr ""
+msgid "Japanese 106 keys"
+msgstr "Japan (106 Tasten)"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Package: "
-msgstr "Paket:"
+msgid "This will take a few minutes."
+msgstr "Das dauert einige Minuten"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Application:"
-msgstr "Anwendung:"
+msgid "Burkina Faso"
+msgstr "Burkina Faso"
-#: ../../standalone/drakbug:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Configuration Wizards"
-msgstr "Konfigurationsassistenten"
+msgid "Use scanners on remote computers"
+msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
+msgid "Delete selected rule"
+msgstr "Markierte Regel entfernen"
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Drucker an CUPS-Server auf der Gegenseite"
+
+#: ../../any.pm:1
#, c-format
-msgid "Windows Migration tool"
-msgstr "Windows Migrationswerkzeug"
+msgid "Insert a floppy in %s"
+msgstr ""
+"Legen Sie eine Diskette, die keine relevanten Daten mehr enthĂ€lt in „%s“ ein."
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
+msgid "Maldives"
+msgstr "Malediven"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Software Manager"
-msgstr "Software-Verwaltung"
+msgid "compact"
+msgstr "Kompakt"
-#: ../../standalone/drakbug:1
+#: ../../common.pm:1
#, c-format
-msgid "Remote Control"
-msgstr "Fernsteuerung"
+msgid "1 minute"
+msgstr "1 Minute"
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Msec"
-msgstr "Msec"
+msgid "on channel %d id %d\n"
+msgstr "auf Kanal %d ID %d\n"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
+msgid ", multi-function device"
+msgstr ", MultifunktionsgerÀt"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mandrake Online"
-msgstr "Mandrake Online"
+msgid "Laos"
+msgstr "Laos"
-#: ../../standalone/drakbug:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr ""
+"Sie haben keine FAT Partition, deren GrĂ¶ĂŸe ich anpassen kann\n"
+"(möglicherweise haben Sie auch einfach nur nichtmehr genĂŒgend\n"
+"freien Speicher)."
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Synchronization tool"
-msgstr "Synchronisationsprogramm"
+msgid "Up"
+msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "First Time Wizard"
-msgstr "First Time Assistent"
+msgid "Firewall"
+msgstr "Firewall"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Mandrake Control Center"
-msgstr "Mandrake Kontrollzentrum"
+msgid "Area:"
+msgstr "Region:"
-#: ../../standalone/drakbug:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Mandrake Bug Report Tool"
-msgstr "Mandrake BugReport Werkzeug"
+msgid "(E)IDE/ATA controllers"
+msgstr "(E)IDE/ATA-Controller"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Parameters"
-msgstr "Parameter"
+msgid "Printer Server"
+msgstr "Drucker-Server"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Internet Connection Configuration"
-msgstr "Konfiguration der Internetverbindung"
+msgid "Disconnection from the Internet complete."
+msgstr "Verbindungstrennung erfolgt."
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "DHCP Client"
-msgstr "DHCP-Klient"
+msgid "Custom configuration"
+msgstr "Angepasste Konfiguration"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Ethernet Card"
-msgstr "Netzwerkkarte"
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Gateway"
-msgstr "Gateway"
+msgid "Saint Pierre and Miquelon"
+msgstr "St. Pierre und Miquelon"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Connection type: "
-msgstr "Verbindungstyp: "
+msgid ""
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
+msgstr ""
+"\n"
+"Wiederherstellungsprobleme:\n"
+"\n"
+"DrakBackup wird bei der Wiederherstellung alle Dateien \n"
+"kontrollieren, bevor sie wiederhergestellt werden.\n"
+"Da vor der Wiederherstellung alle Dateien im \n"
+"Zielverzeichnis von DrakBackup gelöscht werden, \n"
+"gehen alle darin entghaltenen Daten verloren! \n"
+"Seien Sie daher vorsichtig und Àndern Sie die Sicherungskopien \n"
+"nicht manuell.\n"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Profile: "
-msgstr "Profil: "
+msgid "saving Bootsplash theme..."
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet connection configuration"
-msgstr "Konfiguration der Internetverbindung"
+msgid "Portugal"
+msgstr "Portugal"
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Sie haben noch keine Internetverbindung eingerichtet.\n"
-"Sie können dies tun, indem Sie die SchaltflÀche \n"
-"„Konfigurieren“ betĂ€tigen."
+msgid "Do you have another one?"
+msgstr "VerfĂŒgen Sie ĂŒber weitere?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Diese Schnittstelle wurde noch nicht eingerichtet.\n"
-"Starten Sie den Konfigurationsassistenten im Hauptfenster."
+msgid ", printing to %s"
+msgstr ", drucken auf %s"
-#: ../../standalone/drakconnect:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Assign host name from DHCP address"
+msgstr "Sie mĂŒssen einen Rechnernamen oder eine IP eingeben.\n"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "activate now"
-msgstr "Jetzt aktivieren"
+msgid "Toggle to normal mode"
+msgstr "In den Normal-Modus wechseln"
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "deactivate now"
-msgstr "Jetzt deaktivieren"
+msgid "Generic"
+msgstr "Generisch"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DHCP client"
-msgstr "DHCP Klient"
+msgid "Cylinder %d to %d\n"
+msgstr "Zylinder %d bis %d\n"
#: ../../standalone/drakconnect:1
#, c-format
-msgid "Started on boot"
-msgstr "Beim Hochfahren gestartet"
+msgid "New profile..."
+msgstr "Neues Profil..."
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Protocol"
-msgstr "Boot-Protokoll"
+msgid "Which disk do you want to move it to?"
+msgstr "Zu welcher Platte wollen Sie wechseln?"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
+msgid "Display logo on Console"
+msgstr "Logo auf Konsole anzeigen"
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "LAN Configuration"
-msgstr "LAN Konfiguration"
+msgid "Windows Domain"
+msgstr "Windows DomÀne"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "LAN configuration"
-msgstr "LAN Konfiguration"
+msgid "Interface %s (on network %s)"
+msgstr "Schnittstelle %s (an Netzwerk %s)"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Sie haben noch keine Schnittstelle eingerichtet.\n"
-"Sie können dies tun, indem Sie die SchaltflÀche \n"
-"„Konfigurieren“ betĂ€tigen."
+msgid "INFO"
+msgstr "INFO"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connect..."
-msgstr "Verbinden ..."
+msgid "Wallis and Futuna"
+msgstr "Wallis und Futuna"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Disconnect..."
-msgstr "Trenne Verbindung ..."
+msgid "Need to create /etc/dhcpd.conf first!"
+msgstr "„/etc/dhcpd.conf“ muss erst angelegt werden!"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Not connected"
-msgstr "Nicht Verbunden"
+msgid "Is FPU present"
+msgstr ""
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Connected"
-msgstr "Verbunden"
+msgid "There are no scanners found which are available on your system.\n"
+msgstr "Ich konnte keine Scanner direkt an Ihrem Rechner finden.\n"
-#: ../../standalone/drakconnect:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
+"No additional information\n"
+"about this service, sorry."
msgstr ""
-"WARNUNG: Es wurde bereits eine Internetverbindung gefunden. Vielleicht nutzt "
-"diese ihr Netzwerk."
+"Es existieren leider keine\n"
+"weiteren Informationen zu\n"
+"diesem Dienst."
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Interface:"
-msgstr "Schnittstelle:"
+msgid "Build Single NIC -->"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Gateway:"
-msgstr "Gateway:"
+msgid "Is this correct?"
+msgstr "Ist dies richtig?"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Apply"
-msgstr "Anwenden"
+msgid "Marshall Islands"
+msgstr "Marshall Inseln"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Click here to launch the wizard ->"
-msgstr "Hier starten Sie den Assistenten ->"
+msgid "Windows (FAT32)"
+msgstr "Windows (FAT32)"
-#: ../../standalone/drakconnect:1
+#: ../../steps.pm:1
#, c-format
-msgid "Wizard..."
-msgstr "Assistent..."
+msgid "Root password"
+msgstr "Root Passwort"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Status:"
-msgstr "Status:"
+msgid "Build All Kernels -->"
+msgstr "Alle Kerne erstellen -->"
-#: ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Type:"
-msgstr "Typ:"
+msgid "if set to yes, report unowned files."
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Internet access"
-msgstr "Internetzugang"
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"Sie haben keine Auslagerungspartition\n"
+"\n"
+"Wollen Sie trotzdem fortfahren?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hostname: "
-msgstr "Rechnername: "
+msgid "Server IP missing!"
+msgstr "Die Server-IP fehlt!"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Netzwerk konfigurieren"
+msgid "Suriname"
+msgstr "Surinam"
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "State"
-msgstr "Status"
+msgid "Enable ACPI"
+msgstr "ACPI aktivieren"
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "Driver"
-msgstr "Treiber"
+msgid "Graphical Environment"
+msgstr "Grafische ArbeitsoberflÀche"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Protocol"
-msgstr "Protokoll"
+msgid "Gibraltar"
+msgstr "Gibraltar"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Interface"
-msgstr "Schnittstelle"
+msgid "on Tape Device"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Configure Internet Access..."
-msgstr "Internet-Zugang konfigurieren"
+msgid "Do nothing"
+msgstr "Tu nichts"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Wait please"
-msgstr "Bitte Warten"
+msgid "Delete Client"
+msgstr "Client löschen"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr "Name des neuen Profils (es wird als Kopie des aktuellen erstellt):"
+msgid "Filesystem type: "
+msgstr "Dateisystemtyp: "
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New profile..."
-msgstr "Neues Profil..."
+msgid "Starting network..."
+msgstr "Netzwerk starten ..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Profile to delete:"
-msgstr "Zu löschendes Profil: "
+msgid "Vietnam"
+msgstr "Vietnam"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Del profile..."
-msgstr "Profil löschen..."
+msgid "/_Fields description"
+msgstr "/_Felderbeschreibung"
-#: ../../standalone/drakconnect:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Netzwerk Konfiguration (%d Karten)"
+msgid "Optimize your security by using Mandrake Linux"
+msgstr "Optimieren Sie Ihre Sicherheit"
-#: ../../standalone/drakedm:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
+msgid "Help"
+msgstr "Hilfe"
-#: ../../standalone/drakedm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Choosing a display manager"
-msgstr ""
+msgid "Your personal phone number"
+msgstr "Ihre eigene Telefonnummer"
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Which size do you want to keep for Windows on"
+msgstr "Wieviel Platz benötigen sie noch fĂŒr Windows auf"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
msgstr ""
-"Ich kann „mkbootdisk“ nicht richtig beenden: \n"
-" %s \n"
-" %s"
+"Die Testseite(n) wurden an den Drucker gesandt.\n"
+"Es kann einen Augenblick dauern, bevor der Drucker seine Arbeit aufnimmt.\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unable to fork: %s"
-msgstr "Ich kann nicht forken: %s"
+msgid "Username required"
+msgstr "Benutzerkennzeichen nötig"
-#: ../../standalone/drakfloppy:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
msgstr ""
-"In Laufwerk %s liegt kein Medum oder es ist schreibgeschĂŒtzt.\n"
-"Bitte legen Sie eins ein."
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "Stellen Sie sicher, dass ein Medium in Laufwerk %s liegt."
+"„DrakX“ sucht aufgrund Ihrer Sprachauswahl das fĂŒr Sie passende\n"
+"Tastaturlayout aus. Möglicherweise haben Sie jedoch eine Tastatur, die\n"
+"nicht dieser Einstellung entspricht: wenn Sie beispielsweise in der Schweiz\n"
+"eine deutsche Tastatur verwenden wollen oder wenn Sie in Québec (dem\n"
+"französischsprachigen Teil Kanadas) eine französischsprachige Tastatur\n"
+"besitzen. WĂ€hlen Sie einfach ein passendes Layout aus der Liste.\n"
+"\n"
+"Sollten Sie eine andere als die zur gewÀhlten Sprache gehörende Tastatur\n"
+"verwenden wollen, wĂ€hlen Sie die SchaltflĂ€che „%s“. Sie erhalten dann eine\n"
+"Liste aller unterstĂŒtzten Tastaturen.\n"
+"\n"
+"Sollten Sie sich fĂŒr ein Tastaturlayout einer nicht lateinischen Sprache\n"
+"entschieden haben, werden Sie im nÀchsten Schritt gefragt, mit welcher\n"
+"Tastenkombination Sie zwischen dem von Ihnen gewÀhlten und dem lateinischen\n"
+"Layout umschalten wollen."
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build the disk"
-msgstr " Diskette erstellen "
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "SMB (Windows 9x/NT) Drucker-Parameter"
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Output"
-msgstr "Ausgabe"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Remove a module"
-msgstr "Modul entfernen"
+msgid "mkinitrd optional arguments"
+msgstr "Optionale Parameter fĂŒr „mkinitrd“"
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Add a module"
-msgstr "Modul hinzufĂŒgen"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "omit scsi modules"
-msgstr " SCSI Module weglassen "
+msgid "Protocol for the rest of the world"
+msgstr "Protokoll fĂŒr den Rest der Welt"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "if needed"
-msgstr " falls Nötig "
+msgid "Print test pages"
+msgstr "Testseite(n) drucken"
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "omit raid modules"
-msgstr " RAID-Module weglassen "
+msgid "64 MB or more"
+msgstr "64 MB oder mehr"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "force"
-msgstr " mit Gewalt "
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
+"Bitte wÀhlen Sie, welche Testseiten Sie drucken wollen.\n"
+"\n"
+"Bemerkung: Der Druck der Foto-Testseite dauert hÀufig extrem lange. Bei "
+"Laserdruckern mit wenig Speicher kann es auch vorkommen, dass sie gar nicht "
+"gedruckt wird. Normalerweise sollte es ausreichen, die Standard-Testseiten "
+"auszudrucken."
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "mkinitrd optional arguments"
-msgstr "Optionale Parameter fĂŒr „mkinitrd“"
+msgid "Please select the device where your %s is attached"
+msgstr "Bitte wĂ€hlen Sie den GerĂ€tenamen, an dem Ihr „%s“ hĂ€ngt."
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Expert Area"
-msgstr "Experten Bereich"
+msgid "Not formatted\n"
+msgstr "Nicht formatiert\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "kernel version"
-msgstr "Kernversion"
+msgid "Periodic Checks"
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "default"
-msgstr " Standard "
+msgid "PXE Server Configuration"
+msgstr "Konfiguration des PXE-Servers"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "General"
-msgstr "Allgemein"
+msgid "Backup the system files before:"
+msgstr "Systemdateien sichern vor:"
-#: ../../standalone/drakfloppy:1
+#: ../../security/level.pm:1
#, c-format
-msgid "boot disk creation"
-msgstr "Boot-Disketten Erstellung"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"Das ist die Standard-Sicherheitsebene fĂŒr Rechner, mit Internetzugang \n"
+"als Klient."
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
#, c-format
-msgid "drakfloppy"
-msgstr "DrakFloppy"
+msgid "First floppy drive"
+msgstr "erste Disketten-Laufwerk"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Size"
-msgstr " GrĂ¶ĂŸe "
+msgid "/File/_Quit"
+msgstr "/Datei/B_eenden"
-#: ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Module name"
-msgstr " Modulname "
+msgid "Dvorak"
+msgstr "Dvorak"
-#: ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Post Uninstall"
-msgstr "Nach dem Entfernen"
+msgid "Choose the new size"
+msgstr "WĂ€hlen Sie die neue GrĂ¶ĂŸe"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Remove fonts on your system"
-msgstr "Entfernen von Schriftarten auf Ihrem Rechner"
+msgid "Media class"
+msgstr "Medienklasse"
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Initial tests"
-msgstr "Vortests"
+msgid "The %s is not known by this version of Scannerdrake."
+msgstr "Der %s wird nicht von dieser Version von ScannerDrake unterstĂŒzt."
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Post Install"
-msgstr "Nach der Installation"
+msgid "Faroe Islands"
+msgstr "Faröische Inseln"
#: ../../standalone/drakfont:1
#, c-format
-msgid "Install & convert Fonts"
-msgstr "Installiere und konvertiere Fonts"
+msgid "Restart XFS"
+msgstr "Neustart des X-FontServers"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Copy fonts on your system"
-msgstr "Schriften auf Ihren Rechner kopieren"
+msgid "Add host/network"
+msgstr "HinzufĂŒgen eines Rechners/Netzwerks"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Remove List"
-msgstr "Liste entfernen"
+msgid ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Selected All"
-msgstr "Alle auswÀhlen"
+msgid "Please enter the directory to save to:"
+msgstr "Bitte geben Sie das Archivverzeichnis an:"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Unselected All"
-msgstr "Markierung löschen"
+msgid "Model name"
+msgstr "Modellname"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "here if no."
-msgstr "Hier, falls nicht."
+msgid "Albania"
+msgstr "Albanien"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "click here if you are sure."
-msgstr "Klicken Sie hier, wenn Sie sicher sind."
+msgid "No CDR/DVDR in drive!"
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Install List"
-msgstr "Liste installieren"
+msgid "British Indian Ocean Territory"
+msgstr "Britisches Territorium im Indischen Ozean"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-"WÀhlen Sie eine Schriftdatei bzw. ein Verzeichnis und betÀtigen Sie "
-"„HinzufĂŒgen“"
+msgid "Normal Mode"
+msgstr "Normaler Modus"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
+"Please be sure that the cron daemon is included in your services. \n"
"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-"Stellen Sie sicher, das Sie das Recht haben, die Schriften die Sie \n"
-"in Ihr System einbinden wollen, zu verwenden.\n"
+"Stellen Sie sicher, dass der Cron-DĂ€mon als Dienst aktiviert ist.\n"
"\n"
-"- Sie können die Schriften auf normalem Weg einbinden. In seltenen FÀllen \n"
-"können defekte Schriften den X-Server lahmlegen."
+"Beachten Sie, dass zur Zeit alle \"Netzmedien\" auch die Festplatte "
+"verwenden."
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generic Printers"
-msgstr "Generische Drucker"
+msgid "Printer connection type"
+msgstr "Art der Druckeranbindung"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Abiword"
-msgstr "Abiword"
+msgid "No network adapter on your system!"
+msgstr "Sie haben keine Netzwerkkarte!"
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
+msgid "Network %s"
+msgstr "Netzwerk %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
+msgid "Malayalam"
+msgstr "Malayalam"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "WĂ€hlen Sie die Programme, die die Schriften verwenden sollen:"
+msgid "Option %s out of range!"
+msgstr "Der Parameter %s ist yu groß oder zu klein!"
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "Connect %s"
+msgstr "Verbinde %s"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
+msgid "Restarting CUPS..."
+msgstr "Neustart des X-FontServers"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "About"
-msgstr "Über"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "Drucken/Scannen/Fotokarten mit „%s“"
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Font List"
-msgstr "Font-Liste"
+msgid "Duplicate mount point %s"
+msgstr "Den EinhÀngpunkt %s kopieren"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Advanced Options"
-msgstr "Erweiterte Einstellungen"
+msgid "if set to yes, run chkrootkit checks."
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Uninstall Fonts"
-msgstr "Schiften deinstallieren"
+msgid "Connection Configuration"
+msgstr "Verbindungskonfiguration"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Get Windows Fonts"
-msgstr "Windows-Schriften verwenden"
+msgid "Unknown|Generic"
+msgstr "Unbekannt|Generisch"
-#: ../../standalone/drakfont:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Import Fonts"
-msgstr "Schriften einbinden"
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
+msgstr ""
+"Es ist sehr wahrscheinlich, dass zum Zeitpunkt Ihrer Mandrake Linux\n"
+"Installation bereits einige Pakete aktualisiert wurden, etwa da noch Fehler\n"
+"entdeckt und beseitigt wurden oder da in Paketen SicherheitslĂŒcken entdeckt\n"
+"wurden, fĂŒr die bereits Lösungen existieren. Um von diesen aktualisierten\n"
+"Paketen Gebrauch zu machen, wird Ihnen nun angeboten, diese aus dem\n"
+"Internet nachzuladen. BetĂ€tigen Sie die SchaltflĂ€che „%s“, wenn Sie einen\n"
+"Internetzugang haben, um die Pakete zu installieren, andernfalls betÀtigen\n"
+"Sie die SchaltflĂ€che „%s“. Sie können diese Pakete natĂŒrlich auch jederzeit\n"
+"nach der Installation noch installieren.\n"
+"\n"
+"BetĂ€tigen der SchaltflĂ€che „%s“ zeigt Ihnen eine Liste von Servern, von\n"
+"denen Sie die Aktualisierungen herunterladen können. WÀhlen Sie einen in\n"
+"Ihrer NĂ€he. Sie erhalten dann einen Paketauswahldialog: Kontrollieren Sie\n"
+"die Auswahl und bestĂ€tigen Sie diese durch BetĂ€tigen von „%s“. Die Pakete\n"
+"werden nun angefordert und installiert. Sollten Sie das nicht wĂŒnschen,\n"
+"betĂ€tigen Sie einfach die SchaltflĂ€che „%s“."
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "done"
-msgstr "Fertig"
+msgid "Quit"
+msgstr "Verlassen"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "xfs restart"
-msgstr "xfs Neustart"
+msgid "Myanmar"
+msgstr "Burma"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Suppress Fonts Files"
-msgstr "Schriftdateien löschen"
+msgid "Auto allocate"
+msgstr "Automatisches Erstellen"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restart XFS"
-msgstr "Neustart des X-FontServers"
+msgid "Check bad blocks?"
+msgstr "Soll ich nach defekten Blöcken suchen?"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Suppress Temporary Files"
-msgstr "TemporÀre Dateien löschen"
+msgid "Other MultiMedia devices"
+msgstr "Andere Multimedia GerÀte"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "type1inst building"
-msgstr "Erzeuge „type1inst“"
+msgid "No remote machines"
+msgstr "Keine entfernten Maschinen"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "pfm fonts conversion"
-msgstr "pfm-Schriftkonvertierung"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"Willkommen zum Druckerassistenten\n"
+"\n"
+"Dieser Assistent möchte Ihnen helfen, Ihre(n) lokalen Drucker zu "
+"konfigurieren.\n"
+"\n"
+"Falls Sie Drucker haben, die direkt mit dem Rechner verbunden sind, stellen "
+"Sie sicher, dass diese richtig angeschlossen und eingeschaltet sind.\n"
+"\n"
+"BetĂ€tigen Sie die SchaltflĂ€che „Weiter“, wenn Sie soweit sind, bzw. "
+"„Abbruch“, wenn Sie keine Drucker konfigurieren wollen."
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "ttf fonts conversion"
-msgstr "ttf-Schriftkonvertierung"
+msgid "Authentication NIS"
+msgstr "NIS Authentifizierung"
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Ghostscript referencing"
-msgstr "Ghostscriptreferenz"
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr ""
+"Die Option „Gebrauch der Kommandozeilen-Parameter einschrĂ€nken“ ist ohne \n"
+"Angabe eines Passworts wirkungslos"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Fonts conversion"
-msgstr "Konvertieren der Schriften"
+msgid "Internet Connection Sharing currently enabled"
+msgstr "Teilen der Internetverbindung momentan eingeschaltet."
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "True Type install done"
-msgstr "TrueType Installation beendet"
+msgid "Card IO_0"
+msgstr "Karten IO_0"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "Bitte warten Sie ttmkfdir arbeitet ..."
+msgid "United Arab Emirates"
+msgstr "Vereinigte arabische Emirate"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "True Type fonts installation"
-msgstr "Installation von TrueType Schriften"
+msgid "Card IO_1"
+msgstr "Karten IO_1"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Fonts copy"
-msgstr "Kopiere Schriften"
+msgid "Thailand"
+msgstr "Thailand"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Search for fonts in installed list"
-msgstr "Suche installierter Schriften"
+msgid "Routers:"
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "could not find any font.\n"
-msgstr "Konnte keine Schriften finden.\n"
+msgid "Kazakhstan"
+msgstr "Kasachstan"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Reselect correct fonts"
-msgstr "Neuwahl korrekter Schriften"
+msgid "Display all available remote CUPS printers"
+msgstr "Anzeigen aller entfernten CUPS-Drucker"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_newt.pm:1
#, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr "Ich konnte keine Schriften in Ihren eingehÀngten Partitionen finden"
+msgid "Mandrake Linux Installation %s"
+msgstr "Mandrake Linux Installation %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "no fonts found"
-msgstr "Keine Schriften gefunden"
+msgid "Thai keyboard"
+msgstr "ThailÀndisch"
-#: ../../standalone/drakfont:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "parse all fonts"
-msgstr "Alle Schriften analysieren"
+msgid "Dialup options"
+msgstr "Einwahl Parameter"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unselect fonts installed"
-msgstr "Auswahl installierter Schriften zurĂŒcksetzen"
+msgid "Bouvet Island"
+msgstr "Bouvet-Insel"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Search installed fonts"
-msgstr "Suche installierte Schriften"
+msgid "If no port is given, 631 will be taken as default."
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
+"Change your Cd-Rom!\n"
"\n"
-"Click on Configure to launch the setup wizard."
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
-"Willkommen zu DrakGW -\n"
-"das Werkzeug zum Teilen Ihrer Internetverbindung\n"
-"\n"
-"%s\n"
+"Bitte wechseln Sie die CD!\n"
"\n"
-"WĂ€hlen Sie „Konfigurieren“ wenn Sie den Assistenten starten wollen."
+"Bitte legen Sie die CD-ROM „%s“ in Ihr Laufwerk,\n"
+"dann drĂŒcken Sie OK.\n"
+"Falls Sie sie nicht vorliegen haben, drĂŒcken Sie Abbruch."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "Teilen der Internetverbindung - Konfiguration"
+msgid "Polish"
+msgstr "Polen"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Teilen der Internetverbindung wurde noch nicht konfiguriert."
+msgid "Mandrake Online"
+msgstr "Mandrake Online"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Die Einstellungen wurden bereits vorgenommen und sind aktiv."
+msgid "\t-Network by webdav.\n"
+msgstr "\t- Netzwerk per webdav.\n"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "The setup has already been done, but it's currently disabled."
+msgid ""
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
msgstr ""
-"Die Einstellungen wurden bereits vorgenommen, sie sind nur nicht aktiviert."
+"Ihr Rechner hat keine konfigurierte Netzwerkkarte. Bitte verwenden Sie erst "
+"HardDrake, bevor Sie weiter machen."
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Es wurde alles eingerichtet.\n"
-"Sie können Ihre Internetverbindung nun anderen Rechnern in Ihrem \n"
-"lokalen Netz mittels automatischer Netzwerk-Konfiguration (DHCP) \n"
-"teilen."
+msgid "Netmask"
+msgstr "Netzmaske"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Problems installing package %s"
-msgstr "Probleme beim Installieren von Paket %s"
+msgid "No hard drives found"
+msgstr "Keine Festplatten gefunden"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Skripte konfigurieren, Software installieren, Dienste starten ..."
+msgid "Logitech CC Series"
+msgstr "Logitech CC Serie"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring..."
-msgstr "Konfigurieren ..."
+msgid "2 buttons"
+msgstr "2 Tasten"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Es liegt ein möglicher LAN-Adressen Konflikt in der Konfiguration\n"
-"von %s vor!\n"
+msgid "What kind is your ISDN connection?"
+msgstr "Um welchen Typ ISDN-Verbindung handelt es sich?"
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Das lokale Netzwerk endet nicht auf „.0“ - bereinige."
+msgid "Label"
+msgstr "Identifikator"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "Neu konfigurieren des GerÀts und des DHCP-Servers"
+msgid "Save on floppy"
+msgstr "Auf Diskette speichern"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr "Maximale IP-Verleihdauer (in Sekunden)"
+msgid "Printer auto-detection"
+msgstr "Selbsterkennung von Druckern"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The default lease (in seconds)"
-msgstr "Standard-IP-Verleihdauer (in Sekunden)"
+msgid "Which of the following is your ISDN card?"
+msgstr "Welche der folgenden ist Ihre ISDN-Karte?"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
-msgid "The DHCP end range"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
msgstr ""
+"NFS ist ein gelÀufiges Protokoll in TCP/IP Netzwerken um Dateien \n"
+"durch verschiedene Rechner gemeinsam nutzen zu können. \n"
+"Dieser Dienst stellt Ihnen einen solchen Server zur VerfĂŒgung. \n"
+"Konfiguriert wird er in der Datei „/etc/exports“."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The DHCP start range"
-msgstr ""
+msgid "Msec"
+msgstr "Msec"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "The internal domain name"
-msgstr "Der interne DomÀnen-Name"
+msgid ""
+"=> Notice, a label changed:\n"
+"%s"
+msgstr ""
+"=> Anmerkung: Ein Eintrag wurde geÀndert:\n"
+"%s"
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "The DNS Server IP"
-msgstr "Die IP des DNS-Servers"
+msgid "Number of capture buffers:"
+msgstr "Anzahl der Aufnahmepuffer:"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "(Diese) DHCP-Server IP"
+msgid "Your choice? (0/1, default `%s') "
+msgstr "Ihre Wahl? (0/1, Standard ‚%s‘) "
-#: ../../standalone/drakgw:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"DHCP Server Configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
"\n"
-msgstr ""
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Local Network adress"
-msgstr "Lokale Netzwerkadresse"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
"\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
+"\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
msgstr ""
-"Ich kann Ihre aktuelle Konfiguration beibehalten und annehmen, dass Sie "
-"bereits einen DHCP-Server eingerichtet haben. Stellen Sie in diesem Fall "
-"sicher, dass ich Ihr Klasse-C Netzwerk korrekt erkannt habe. Ich werde es "
-"weder neukonfigurieren, noch Ihre DHCP-Konfiguration Àndern.\n"
+"Alle Partitionen, die gerade neu erzeugt wurden, mĂŒssen formatiert werden\n"
+"(d.h. es muss ein Dateisystem auf der Partition erstellt werden), bevor sie\n"
+"verwendet werden können.\n"
"\n"
-"Ihr standardmĂ€ĂŸiger DNS Eintrag ist der Caching Nameserver Ihrer Firewall. "
-"Sie können diesen etwa durch den DNS Server Ihres Internetanbieters "
-"ersetzen.\n"
+"Sie erhalten hier auch die Möglichkeit bereits existierende Partitionen neu\n"
+"zu formatieren, um die darauf vorhandenen Daten zu löschen. Markieren Sie\n"
+"diese einfach ebenfalls in der Liste.\n"
"\n"
-"Ich kann jedoch auch Ihre Schnittstelle neu konfigurieren und einen DHCP-"
-"Server fĂŒr Sie aufsetzen.\n"
+"Es sei angemerkt, dass nicht alle Partitionen neu formatiert werden mĂŒssen.\n"
+"Sie sollten normalerweise nur die Partitionen neu formatieren, die\n"
+"Systemdateien, jedoch keine Privatdaten enthalten (etwa „/“, „/usr“ oder\n"
+"„/var“). Partitionen wie etwa „/home“ sollten Sie normalerweise nicht neu\n"
+"formatieren.\n"
+"\n"
+"Seien Sie sorgfÀltig bei der Auswahl der Partitionen. Nach dem Formatieren\n"
+"sind alle zuvor darauf existierenden Daten unwiederbringlich verloren.\n"
+"\n"
+"Wenn Sie alle Einstellungen vorgenommen haben, betÀtigen Sie die\n"
+"SchaltflĂ€che „%s“, um mit dem Formatieren der Partitionen zu beginnen.\n"
"\n"
+"BetĂ€tigen Sie „%s“, wenn Sie eine andere Partition fĂŒr Ihr neues Mandrake\n"
+"Linux vorgesehen haben.\n"
+"\n"
+"BetĂ€tigen Sie die SchaltflĂ€che „%s“, falls Sie Partitionen auf defekte\n"
+"Blöcke untersuchen wollen."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "French"
+msgstr "Frankreich"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTY)"
+msgstr "Tschechien (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
+#, c-format
+msgid "Hardware probing in progress"
+msgstr "Hardwareerkennung lÀuft"
#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Net Device"
+msgstr "xinetd"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Summary"
+msgstr "Zusammenfassung"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
-"Aktuelle Konfiguration von „%s“:\n"
-"\n"
-"Netzwerk: %s\n"
-"IP-Adresse: %s\n"
-"IP-Eigenschaften: %s\n"
-"Treiber: %s"
+" (Parallele AnschlĂŒsse: /dev/lp0, /dev/lp1, ..., Ă€quivalent zu LPT1:, "
+"LPT2:, ..., Erster USB Drucker: /dev/usb/lp0, zweiter USB Drucker: /dev/usb/"
+"lp1, ...)."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Current interface configuration"
-msgstr "Aktuelle Schnittstellenkonfiguration"
+msgid "Next"
+msgstr "Weiter"
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Show current interface configuration"
-msgstr "Aktuelle Schnittstellenkonfiguration anzeigen"
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr ""
+"Sie können den Betriebssystemstarter\n"
+"nicht auf einer %s Partition installieren!\n"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "No (experts only)"
-msgstr ""
+msgid "CHAP"
+msgstr "CHAP"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Automatic reconfiguration"
-msgstr "Automatische Rekonfiguration"
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(BOOTP/DHCP/ZEROCONF)"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
"\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
"\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
-"Warnung, das NetzwerkgerĂ€t „%s“ ist bereits konfiguriert.\n"
"\n"
-"Wollen Sie eine automatische Neukonfiguration?\n"
+"Willkommen.\n"
"\n"
-"Sie können auch eine manuelle Einrichtung vornehmen - dafĂŒr sollten Sie "
-"jedoch wissen, wie das funktioniert."
+"Die Parameter der Autoinstallation sind in den Abschnitten rechts verfĂŒgbar."
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface already configured"
-msgstr "Ihr Netzwerk ist bereits konfiguriert"
+msgid "Puerto Rico"
+msgstr "Puerto Rico"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""
-"Bitte wÀhlen Sie die Netzwerkkarte, die mit Ihrem lokalen Netzwerk \n"
-"verbunden ist."
+"Das Paket ‚ImageMagick‘ wird zur Beendigung der Konfiguration benötigt.\n"
+"WĂ€hlen Sie „Ok“, um ‚ImageMagick‘ zu installieren oder „Abbruch“ zum Beenden."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "Litauen (QWERTY - „number row“)"
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
-"%s\n"
"\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
msgstr ""
-"Sie haben nur eine konfiguriertes NetzwerkgerÀt an Ihrem Rechner:\n"
+"Folgende Pakete werden entfernt, um das Aktualisieren Ihres Rechners zu "
+"ermöglichen: %s\n"
"\n"
-"%s\n"
"\n"
-"Ich setze ihr lokales Netz damit auf."
+"Wollen Sie diese Pakete wirklich entfernen?\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface"
-msgstr "Netzwerkkarte"
+msgid "Anguilla"
+msgstr "Anguilla"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "NIS Domain"
+msgstr "NIS Domain"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
+"\n"
+"- User Files:\n"
msgstr ""
-"Ihr Rechner hat keine konfigurierte Netzwerkkarte. Bitte verwenden Sie erst "
-"HardDrake, bevor Sie weiter machen."
+"\n"
+"- Benutzerdateien:\n"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "No network adapter on your system!"
-msgstr "Sie haben keine Netzwerkkarte!"
+msgid "Antarctica"
+msgstr "Antarktis"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Interface %s"
-msgstr "Schnittstelle: %s"
+msgid "Mount options"
+msgstr "EinhÀng-Optionen"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Schnittstelle %s (verwendet Modul %s)"
-
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Net Device"
-msgstr "xinetd"
+msgid "Jamaica"
+msgstr "Jamaika"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
+"Weist Roh-GerÀten ein blockorientiertes GerÀt (etwa eine\n"
+"Festplattenpartition) zu. Dies wird fĂŒr Anwendungen wie\n"
+"etwa ORACLE Datenbankem oder DVD Spielern benötigt"
-#: ../../standalone/drakgw:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
msgstr ""
-"Sie sind dabei, Ihren Rechner zu konfigurieren, dass er die eingerichtete \n"
-"Internetverbindung mit einem lokalem Netzwerk teilt.\n"
-"\n"
-"Stellen Sie sicher, dass Sie Ihre Netzwerk-/Internetverbindung\n"
-"mit DrakConnect eingerichtet haben, bevor Sie fortfahren.\n"
-"Anmerkung: Sie benötigen eine Netzwerkkarte, mit deren Hilfe Sie ein \n"
-"lokales Netz (LAN) aufsetzen können."
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Teilen der Internet-Verbindung"
+msgid "Please wait, preparing installation..."
+msgstr "Bitte warten, bereite Installation vor"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Teilen der Internetverbindung ist nun eingeschaltet."
+msgid "Czech (QWERTZ)"
+msgstr "Tschechien (QWERTZ)"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Enabling servers..."
-msgstr "Server aktivieren ..."
+msgid "Track network card id (useful for laptops)"
+msgstr "Netzwerkkarten-ID ĂŒberwachen (sinnvoll fĂŒr Laptops)"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "dismiss"
-msgstr "Verwerfen"
+msgid "The port number should be an integer!"
+msgstr "Die Port Nummer muss eine ganze Zahl sein!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "reconfigure"
-msgstr "neu konfigurieren"
+msgid "You must choose an image file first!"
+msgstr "Sie mĂŒssen zuerst eine Abbild-Datei auswĂ€hlen!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "enable"
-msgstr "aktivieren"
+msgid "Restore from Hard Disk."
+msgstr "Von Festplatte wiederherstellen"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Die Einrichtung einer gemeinsamen Internet-Verbindung wurde bereits "
-"durchgefĂŒhrt.\n"
-"Momentan ist sie deaktiviert.\n"
-"\n"
-"Was wollen Sie tun?"
+msgid "Add to LVM"
+msgstr "Zum LVM hinzufĂŒgen"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Teilen der Internet-Verbindung momentan abgeschaltet."
+msgid "DNS server"
+msgstr "DNS-Server"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Teilen der Internet-Verbindung ist nun abgeschaltet."
+msgid "Trinidad and Tobago"
+msgstr "Trinidad und Tobago"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disabling servers..."
-msgstr "Server deaktivieren ..."
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr "LPD und LPRng unterstĂŒkeine IPP Drucker.\n"
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "disable"
-msgstr "deaktivieren"
+msgid "simple"
+msgstr "Einfach"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Es wurde bereits eine geteilte Internet-Verbindung aufgesetzt.\n"
-"Momentan ist sie aktiviert.\n"
-"\n"
-"Was wollen Sie tun?"
+msgid "Clear all"
+msgstr "Alles löschen"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Teilen der Internetverbindung momentan eingeschaltet."
+msgid "No test pages"
+msgstr "Keine Testseiten"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
-msgstr ""
+msgid "Adapter %s: %s"
+msgstr "Adapter %s: %s"
-#: ../../standalone/drakhelp:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
-msgstr ""
+msgid "Falkland Islands (Malvinas)"
+msgstr "Falkland Inseln"
-#: ../../standalone/drakperm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Path"
+msgid "Unknown model"
+msgstr "Unbekanntes Modell"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check files/directories writable by everybody."
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "authentication"
+msgstr "Authentifizierung"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "group :"
-msgstr "Gruppe :"
+msgid "Backup Now"
+msgstr "Jetzt sichern"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "user :"
-msgstr "Benutzer :"
+msgid "/_File"
+msgstr "/_Datei"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Path selection"
-msgstr "Pfad-Auswahl"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Drucker fĂŒr StarOffice/OpenOffice.org/GIMP entfernen"
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
#, c-format
-msgid "when checked, owner and group won't be changed"
+msgid ""
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
msgstr ""
+"Startet Paketfilterung fĂŒr Linux 2.2er Kerne, um Ihren Rechner \n"
+"durch eine Firewall vor Angriffen aus dem Netz zu schĂŒtzen."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Use group id for execution"
-msgstr "Gruppen-ID zur AusfĂŒhrung benutzen"
+msgid "Tamil (ISCII-layout)"
+msgstr "Tamilisch (TSCII Layout)"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use owner id for execution"
-msgstr "EigentĂŒmer-ID zur AusfĂŒhrung benutzen"
+msgid "Mayotte"
+msgstr "Mayotte (Frankreich)"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
+msgid "Creating auto install floppy..."
+msgstr "Erstellen einer Auto-Installationsdiskette"
-#: ../../standalone/drakperm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Set-GID"
-msgstr ""
+msgid "Searching for scanners ..."
+msgstr "Suche nach neuen Scannern ..."
-#: ../../standalone/drakperm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Set-UID"
-msgstr ""
+msgid "Partitioning"
+msgstr "Partitionierung"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "sticky-bit"
-msgstr ""
+msgid "Russia"
+msgstr "Russland"
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Property"
-msgstr "Eigenschaft"
+msgid "ethernet card(s) detected"
+msgstr "Netzwerkkarte(n) gefunden"
-#: ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Permissions"
-msgstr "Berechtigungen"
+msgid "Syslog"
+msgstr "SysLog"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Current user"
-msgstr "Aktueller Benutzer"
+msgid "Can't create catalog!"
+msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "browse"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
msgstr ""
-#: ../../standalone/drakperm:1
+# ../../diskdrak1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Edit current rule"
-msgstr ""
+msgid "Not enough free space for auto-allocating"
+msgstr "Nicht genug freier Platz, damit ich selbst Partition anlegen kann."
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "edit"
-msgstr ""
+msgid "Set root password"
+msgstr "Root-Passwort setzen"
-#: ../../standalone/drakperm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Delete selected rule"
-msgstr "Markierte Regel entfernen"
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
+msgstr ""
+"Es existiert kein freier Treiber fĂŒr Ihre Soundkarte (%s), aber es gibt "
+"einen proprietÀren Treiber unter \"%s\"."
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "delete"
-msgstr "löschen"
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr ""
+"Durch VerĂ€nderung der PartitionsgrĂ¶ĂŸe von %s, gehen sĂ€mtliche Daten darauf "
+"verloren"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Add a new rule at the end"
-msgstr "Neue Regel am Ende hinzufĂŒgen"
+msgid "Internet connection configuration"
+msgstr "Konfiguration der Internetverbindung"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "add a rule"
-msgstr "eine Regel hinzufĂŒgen"
+msgid "Scanning for TV channels"
+msgstr "Sendersuche..."
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Move selected rule down one level"
+msgid "Kernel:"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Down"
-msgstr "Runter"
+msgid "/_About..."
+msgstr "/_Über ..."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Move selected rule up one level"
-msgstr "Markierte Regel eine Ebene höher verschieben"
+msgid "Bengali"
+msgstr "Bangladesh"
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Up"
-msgstr ""
+msgid "Preference: "
+msgstr "Einstellung: "
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "select perm file to see/edit"
-msgstr ""
+msgid "Wizard..."
+msgstr "Assistent..."
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
+msgid "Services: %d activated for %d registered"
+msgstr "Dienste: %d aktiviert von %d registrierten."
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1
#, c-format
-msgid "permissions"
-msgstr "Berechtigungen"
+msgid "Create a bootdisk"
+msgstr "Startdiskette erstellen"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "group"
-msgstr "Gruppe"
+msgid "Solomon Islands"
+msgstr "Solomon-Inseln"
-#: ../../standalone/drakperm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "user"
-msgstr "Benutzer"
+msgid "(module %s)"
+msgstr "(Modul %s)"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "path"
-msgstr ""
+msgid "Workgroup"
+msgstr "Arbeitsgruppe"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Ort der auto_install.cfg Datei"
+msgid "Printer host name or IP"
+msgstr "Rechnername/IP des Druckers"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
+msgid "Host Path or Module"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
+msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr ""
+"Druckernamen sollten nur Buchstaben, Ziffern und den Unterstrich unterhalten"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "No image found"
-msgstr "Kein Abbild gefunden"
+msgid "Show current interface configuration"
+msgstr "Aktuelle Schnittstellenkonfiguration anzeigen"
-#: ../../standalone/drakpxe:1
+#: ../../help.pm:1
#, c-format
-msgid "Installation image directory"
-msgstr "Verzeichnis des Installationsabbildes"
+msgid "Development"
+msgstr "Entwicklungsplattform"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
+msgid "Done"
+msgstr "Fertig"
-#: ../../standalone/drakpxe:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "The DHCP end ip"
-msgstr ""
+msgid "Web Server"
+msgstr "Webserver"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The DHCP start ip"
+msgid "\tDo not include System Files\n"
+msgstr "\tKeine Systemdateien\n"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Chile"
+msgstr "Chile"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
msgstr ""
+"Der Lexmark Tintenstrahl-Druckertriber unterstĂŒtzt nur lokale Drucker, keine "
+"Drucker auf entfernten Rechnern oder an Printserver-Boxen. Bitte schließen "
+"Sie den Druker direkt an Ihren Rechner oder richten Sie ihn auf dem Rechner "
+"ein, an den er angeschlossen ist."
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
"\n"
+"Do not use \"scannerdrake\" for this device!"
msgstr ""
+"Ihr MultifunktionsgerÀt wurde automatisch auch zum Scannen eingerichtet. Sie "
+"können nun mit dem Befehl „scanimage“ („scanimage -d hp:%s“ um den Scanner "
+"auszuwÀhlen, falls Sie mehrere angeschlossen haben), eingegeben in der "
+"Kommandozeile, scannen. Wenn Sie eine grafisches Werkzeug verwenden wollen: "
+"„xscanimage“ bzw. „xsane“. Sie können auch den GIMP verwenden. WĂ€hlen Sie "
+"einfach im MenĂŒ „Datei/Holen“ den entsprechenden Eintrag. Sie können sich "
+"auch mittels „man scanimage“ bzw „man sane-hp“ in der Kommandozeile weitere "
+"Informationen ausgeben lassen.\n"
+"\n"
+"Verwenden Sie fĂŒr dieses GerĂ€t nicht „ScannerDrake“!"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
#, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Schnittstelle %s (an Netzwerk %s)"
+msgid "(already added %s)"
+msgstr "(%s wurde bereits hinzugefĂŒgt)"
-#: ../../standalone/drakpxe:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr ""
-"Bitte wĂ€hlen Sie, welches NetzwerkgerĂ€t fĂŒr den DHCP-Server verwendet wird."
+msgid ", using command %s"
+msgstr ", mittels Kommando „%s“"
-#: ../../standalone/drakpxe:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+msgid "Alt and Shift keys simultaneously"
+msgstr "Alt und Umschalttaste gleichzeitig"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Flags"
msgstr ""
-"Sie sind dabei, auf Ihrem Rechner einen PXE-Server als DHCP-Server sowie "
-"einen TFTP-Server einzurichten. Damit ermöglichen Sie es anderen Rechnern "
-"Ihres Netzwerks eine Installation von diesem Rechner aus vorzunehmen.\n"
-"\n"
-"Stellen Sie sicher, dass Sie Ihre Netzwerk-/Internetverbindung mit "
-"DrakConnect eingerichtet haben, bevor Sie fortfahren.\n"
-"Anmerkung: Sie benötigen eine Netzwerkkarte, mit deren Hilfe Sie ein lokales "
-"Netz (LAN) aufsetzen können."
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Installation Server Configuration"
-msgstr "Konfiguration des Installations-Servers"
+msgid "Add/Del Users"
+msgstr "Benutzer hinzufĂŒgen/löschen"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "PXE Server Configuration"
-msgstr "Konfiguration des PXE-Servers"
+msgid "Host/network IP address missing."
+msgstr ""
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please wait, setting security options..."
-msgstr "Bitte warten, Sicherheitsoptionen werden eingestellt..."
+msgid "weekly"
+msgstr "wöchendlich"
-#: ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Please wait, setting security level..."
-msgstr "Bitte warten, Sicherheitsebene wird eingestellt..."
+msgid "Settings"
+msgstr "Einstellungen"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Periodic Checks"
-msgstr ""
+msgid "The entered host/network IP is not correct.\n"
+msgstr "Die eingegebene Rechner/Netzwerk Information ist nicht korrekt.\n"
-#: ../../standalone/draksec:1
+#: ../../any.pm:1
#, c-format
-msgid "System Options"
-msgstr "Systemoptionen"
+msgid "Here is the full list of available countries"
+msgstr "Hier die komplette Liste aller Staaten"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Network Options"
-msgstr "Netzwerkoptionen"
+msgid "Alternative test page (A4)"
+msgstr "Alternative Testseite (A4)"
-#: ../../standalone/draksec:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
+"Falls Sie alle aufgefĂŒhrten CDs haben, wĂ€hlen Sie „OK“, \n"
+"falls Sie keine der aufgefĂŒhrten CDs haben, wĂ€hlen Sie „Abbruch“,\n"
+"falls nur einige der aufgefĂŒhrten CDs fehlen, entfernen Sie die \n"
+"entsprechende Markierung und wĂ€hlen Sie dann „OK“."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Security Administrator:"
-msgstr "Sicherheitsadministrator (Kennzeichen oder E-Mail):"
+msgid "Wait please"
+msgstr "Bitte Warten"
-#: ../../standalone/draksec:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Security Alerts:"
-msgstr "Sicherheitswarnungen:"
+msgid "PAP"
+msgstr "PAP"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Security Level:"
-msgstr "Sicherheitsebene:"
+msgid "Backup user files"
+msgstr "Benutzerdateien sichern"
-#: ../../standalone/draksec:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "(default value: %s)"
-msgstr " (Voreinstellung: %s)"
+msgid "New"
+msgstr "Neu"
-#: ../../standalone/draksec:1
-#, c-format
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-" to the Internet as a client.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
"\n"
-"High: There are already some restrictions, and more automatic checks "
-"are run every night.\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
"\n"
-"Higher: The security is now high enough to use the system as a server "
-"which can accept\n"
-" connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-" should choose a lower level.\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
"\n"
-"Paranoid: This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-" features are at their maximum\n"
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
"\n"
-"Security Administrator:\n"
-" If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-" email)"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
+"\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
+"\n"
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"Sie können nun das »root« Passwort fĂŒr Ihr Mandrake Linux System eingeben.\n"
+"Das Passwort muss zweimal eingegeben werden, um sicher zu stellen, dass Sie\n"
+"es korrekt eingegeben haben.\n"
"\n"
+"»root« ist das Benutzerkennzeichen des Systemadministrators. Er ist der\n"
+"einzige der berechtigt ist, neue Software zu installieren, Systemdateien zu\n"
+"Àndern oder neue Benutzerkennzeichen anzulegen. Kurz gesagt: »root« darf\n"
+"alles! WÀhlen Sie deshalb das Passwort sehr sorgfÀltig aus! Unberechtigter\n"
+"Zugang zu diesem Kennzeichen ist extrem gefĂ€hrlich fĂŒr die IntegritĂ€t Ihres\n"
+"Systems und der darauf enthaltenen Daten. Daher mĂŒssen Sie auch ein\n"
+"Passwort auswĂ€hlen, was nicht leicht zu erraten ist; „DrakX“ teilt Ihnen\n"
+"mit, wenn das Passwort zu einfach ist. Sie sehen, dass es auch möglich ist,\n"
+"kein Passwort zu vergeben. Wir raten Ihnen jedoch dringend davon ab!\n"
+"Glauben Sie nicht, dass nur, weil Sie GNU/Linux geladen haben, Ihre anderen\n"
+"Betriebssysteme vor Fehlern sicher sind. »root« hat keine BeschrÀnkungen.\n"
+"Er könnte beispielsweise unbeabsichtigt erweise alle Daten auf allen\n"
+"Partitionen löschen, weil er unvorsichtigerweise auf die Partitionen selber\n"
+"zugegriffen hat!\n"
"\n"
+"Das Passwort sollte eine Mischung aus alphanumerischen Zeichen sein und\n"
+"mindestens 8 Zeichen lang. Es sollte niemals irgendwo aufgeschrieben\n"
+"werden.\n"
"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
-msgstr ""
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
+"Machen Sie das Passwort aber nicht zu lang oder zu kompliziert: Sie sollten\n"
+"es sich ohne großen Aufwand merken können.\n"
"\n"
+"Sie mĂŒssen das Passwort zweimal eingeben - ein Tippfehler beim ersten\n"
+"Versuch könnte sonst zu einem Problem werden, da Sie anschließend das\n"
+"„falsche“ Passwort bei der Verbindung mit dem System eingeben mĂŒssten.\n"
"\n"
-"You can visit our hardware database at:\n"
+"Wenn Sie wollen, dass der Zugang zu diesem Rechner ĂŒber einen\n"
+"Authentifizierungsserver verwaltet wird, betÀtigen Sie die SchaltflÀche\n"
+"„%s“.\n"
"\n"
+"Falls in Ihrem Netzwerk LDAP, NIS oder PDC zur Authentifizierung verwendet\n"
+"wird, wĂ€hlen Sie bitte den entsprechenden MenĂŒpunkt. Falls Sie nicht\n"
+"wissen, welches Protokoll Sie verwenden, fragen Sie Ihren\n"
+"Netzwerkadministrator.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"Wenn Sie Probleme haben, sich Passwörter zu merken, können Sie die Option\n"
+"„%s“ wĂ€hlen. Dennoch mĂŒssen wir Ihnen von dieser Möglichkeit abraten.\n"
+"Besonders wenn Sie mit Ihrem Rechner stÀndig oder auch nur zeitweise mit\n"
+"dem Internet verbunden sind."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
+"\n"
+"If you do not know what to choose, stay with the default option."
msgstr ""
+"Nun ist es an der Zeit, die gewĂŒnschte Sicherheitsebene fĂŒr Ihr System\n"
+"festzulegen. Als Faustregel sollte hier dienen: Je zugÀnglicher die\n"
+"Maschine ist und je kritischer die auf ihr gesicherten Daten sind, desto\n"
+"höher sollte die Sicherheitsebene sein. Andererseits geht die gewonnene\n"
+"Sicherheit zulasten der Benutzerfreundlichkeit und Einfachheit, mit der\n"
+"gewisse Befehle/AblĂ€ufe durchgefĂŒhrt werden können.\n"
+"\n"
+"Sollten Sie sich an dieser Stelle nicht sicher sein, so behalten Sie die\n"
+"Standardeinstellung bei."
-#: ../../standalone/draksound:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No Sound Card detected!"
-msgstr "Keine Soundkarte erkannt!"
+msgid "Load from floppy"
+msgstr "Von Diskette laden"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "%s BootSplash (%s) preview"
-msgstr "%s BootSplash (%s) Vorschau"
+msgid "The following printer was auto-detected. "
+msgstr "Der folgenden Drucker wurde automatisch erkannt."
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Generating preview ..."
-msgstr "Vorschau erzeugen ..."
+msgid "Boot Floppy"
+msgstr "Bootdiskette"
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You must choose an image file first!"
-msgstr "Sie mĂŒssen zuerst eine Abbild-Datei auswĂ€hlen!"
+msgid "Norwegian"
+msgstr "Norwegen"
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "ProgressBar color selection"
-msgstr "Farbauswahl fĂŒr den Fortschrittsbalken"
+msgid "Searching for new scanners ..."
+msgstr "Suche nach neuen Scannern ..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
-msgstr ""
+msgid "Apache World Wide Web Server"
+msgstr "Apache Web-Server"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "saving Bootsplash theme..."
+msgid "stepping of the cpu (sub model (generation) number)"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "choose image file"
-msgstr "Abbild-Datei auswÀhlen"
-
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "choose image"
-msgstr "Abbild-Datei auswÀhlen"
+msgid "select path to restore (instead of /)"
+msgstr "Pfad zum Wiederherstellen auswÀhlen (anstatt /)"
#: ../../standalone/draksplash:1
#, c-format
msgid "Configure bootsplash picture"
msgstr "Bootsplash-Bild konfigurieren"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Make kernel message quiet by default"
+msgid "China"
+msgstr "China"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid " (Make sure that all your printers are connected and turned on).\n"
msgstr ""
+"(Stellen Sie bitte sicher, dass alle Drucker angeschlossen und angeschaltet "
+"sind).\n"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Display logo on Console"
-msgstr "Logo auf Konsole anzeigen"
+msgid "Georgia"
+msgstr "Georgien"
-#: ../../standalone/draksplash:1
+#: ../../standalone/printerdrake:1
#, c-format
-msgid "Choose color"
-msgstr "Farbe einstellen"
+msgid "Reading data of installed printers..."
+msgstr "Lese Daten installierter Drucker ..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Save theme"
-msgstr "Thema abspeichern"
+msgid " Erase Now "
+msgstr " Jetzt löschen"
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Preview"
-msgstr "Vorschau"
+msgid "server"
+msgstr "Server"
-#: ../../standalone/draksplash:1
+#: ../../install_any.pm:1
#, c-format
-msgid "the color of the progress bar"
-msgstr ""
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "Legen Sie eine leere, FAT formatierte Diskette in Laufwerk %s ein."
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "the height of the progress bar"
+msgid "yes means the processor has an arithmetic coprocessor"
msgstr ""
+"Ja bedeutet, dass der Prozessor einen arithmetischen Koprozessor besitzt."
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "the width of the progress bar"
-msgstr ""
+msgid "Please Wait... Applying the configuration"
+msgstr "Einen Moment ... ich richte die Konfiguration ein"
-#: ../../standalone/draksplash:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Willkommen zum Betriebssystem-Starter GRUB!"
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
+msgid "Grub"
+msgstr "Grub"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "text box height"
-msgstr ""
+msgid "SCSI controllers"
+msgstr "SCSI-Controller"
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "text width"
-msgstr ""
+msgid " on LPD server \"%s\", printer \"%s\""
+msgstr "auf LDP-Server „%s“, Drucker „%s“"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
+msgid "Choosing a display manager"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
-msgstr ""
+msgid "Zeroconf Host name"
+msgstr "Zeroconf Rechnername"
-#: ../../standalone/draksplash:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Browse"
-msgstr ""
+msgid "IP address should be in format 1.2.3.4"
+msgstr "Die IP Adresse sollte etwa die Form „192.168.1.42“ haben!"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Theme name"
-msgstr "Themenname"
+msgid "Ecuador"
+msgstr "Ecuador"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "final resolution"
-msgstr "endgĂŒltige Auflösung"
+msgid "Add an item"
+msgstr "Eintrag hinzufĂŒgen"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "first step creation"
-msgstr "Erter Schritt Erstellung"
+msgid "The printers on this machine are available to other computers"
+msgstr "Die Drucker dieses Rechners sind fĂŒr andere Rechner nutzbar"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgid "I can't find needed image file `%s'."
+msgstr "Ich kann die benötigte Abbild-Datei „%s“ nicht finden."
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr ""
-"Das Paket ‚ImageMagick‘ wird zur Beendigung der Konfiguration benötigt.\n"
-"WĂ€hlen Sie „Ok“, um ‚ImageMagick‘ zu installieren oder „Abbruch“ zum Beenden."
+"Es wurde keine Soundkarte gefunden. Versuchen Sie „harddrake“ nach der "
+"Installation."
-#: ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
msgstr ""
+"Angabe eines ungĂŒltigen Ports: „%s“.\n"
+"Das Format lautet: „port/tcp“ oder „port/udp“, \n"
+"wobei Port eine Zahl zwischen 1 und 65535."
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "No TV Card detected!"
-msgstr "Keine TV-Karte gefunden!"
+msgid "Shell"
+msgstr "Shell"
-#: ../../standalone/drakxtv:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "Sie können nun (unter X-Windows) „xawtv“ starten.\n"
+msgid "PCI"
+msgstr "PCI"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Have a nice day!"
-msgstr "Bis bald!"
+msgid "Sao Tome and Principe"
+msgstr "Sao Tome und Principe"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "XawTV isn't installed!"
-msgstr "XawTV ist nicht installiert!"
+msgid "Can't login using username %s (bad password?)"
+msgstr "Ich kann mich unter „%s“ nicht anmelden! Stimmt das Passwort?"
-#: ../../standalone/drakxtv:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Bei der Suche der TV-KanÀle trat ein Fehler auf"
+msgid "Azerbaidjani (latin)"
+msgstr "Aserbeidschan (Lateinisches Layout)"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Scanning for TV channels"
-msgstr "Sendersuche..."
+msgid "Package not installed"
+msgstr "Paket nicht installiert"
-#: ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Scanning for TV channels in progress ..."
-msgstr "Sendersuche ..."
+msgid "Become a MandrakeExpert"
+msgstr "Werden Sie ein „MandrakeExpert“"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Area:"
-msgstr "Region:"
+msgid "American Samoa"
+msgstr "Samoa"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "TV norm:"
-msgstr "Fernsehnorm:"
+msgid "Protocol"
+msgstr "Protokoll"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Copy fonts on your system"
+msgstr "Schriften auf Ihren Rechner kopieren"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Harddrake help"
+msgstr "HardDrake Hilfe"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Bogomips"
+msgstr "Bogomips"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Mandrake Terminal Server Configuration"
+msgstr "Mandrake Terminal Server Konfiguration"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr "Bitte geben Sie Ihre Fernsehnorm und Region ein"
+"\n"
+" DrakBackup Report Details\n"
+"\n"
+"\n"
+msgstr ""
+"\n"
+" DrakBackup Report Details\n"
+"\n"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Australian Optus cable TV"
+msgid "Restore all backups"
+msgstr "Alle Sicherungen wiederherstellen"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check open ports."
+msgstr "Auf „Ja“ gestellt, werden offene Ports kontrolliert."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "This may take a moment to erase the media."
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Newzealand"
-msgstr "Neuseeland"
+msgid "You can't select/unselect this package"
+msgstr "Sie können dieses Paket nicht auswÀhlen/es aus der Auswahl entfernen."
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "France [SECAM]"
-msgstr "Frankreich (SECAM)"
+msgid "Warning"
+msgstr "Warnung"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "East Europe"
-msgstr "Osteuropa"
+msgid ""
+"\n"
+"- Other Files:\n"
+msgstr ""
+"\n"
+"- Sonstige Dateien:\n"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "West Europe"
-msgstr "Westeuropa"
+msgid "Remote host name"
+msgstr "Name des entfernten Rechners"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "China (broadcast)"
-msgstr "China (terrestrisch)"
+msgid "deactivate now"
+msgstr "Jetzt deaktivieren"
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "Japan (cable)"
-msgstr "Japan (Kabel)"
+msgid "access to X programs"
+msgstr "Zugriff auf X-Programme"
-#: ../../standalone/drakxtv:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Japan (broadcast)"
-msgstr "Japan (terrestrisch)"
+msgid "Computing the size of the Windows partition"
+msgstr "Berechnung der GrĂ¶ĂŸe der Windows Partition"
-# ../../standalone/drakxtv_.c:37ç
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#: ../../standalone/drakxtv:1
#, c-format
-msgid "Canada (cable)"
-msgstr "Kanada (Kabel)"
+msgid "Italy"
+msgstr "Italien"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "USA (cable-hrc)"
-msgstr "USA (Kabel-hrc)"
+msgid "Name of printer"
+msgstr "Druckername"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "USA (cable)"
-msgstr "USA (Kabel)"
+msgid "disable"
+msgstr "deaktivieren"
-#: ../../standalone/drakxtv:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "USA (broadcast)"
-msgstr "USA (terrestrisch)"
+msgid "error unmounting %s: %s"
+msgstr "Fehler beim AushÀngen von %s: %s"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"XawTV isn't installed!\n"
-"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgid "Do it!"
+msgstr "AusfĂŒhren!"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Cayman Islands"
+msgstr "Cayman-Inseln"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "%s not responding"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "primary"
-msgstr "PrimÀr"
+msgid "Select model manually"
+msgstr "Modell auswÀhlen"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "secondary"
-msgstr "SekundÀr"
+msgid "Format"
+msgstr "Formatieren"
-#: ../../standalone/harddrake2:1
+#: ../../network/adsl.pm:1
#, c-format
msgid ""
-"Click on a device in the left tree in order to display its information here."
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
msgstr ""
+"Der gebrÀuchlichste Weg mit ADSL eine Verbindung aufzubauen ist pppoe.\n"
+"Einige Verbindungen benutzen jedoch pptp, andere dhcp.\n"
+"Wenn Sie nicht wissen was Sie brauchen, wĂ€hlen Sie „pppoe verwenden“"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Unknown"
-msgstr "Unbekannt"
+msgid "Various"
+msgstr "Verschiedene"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "unknown"
-msgstr "Unbekannt"
+msgid "Zip"
+msgstr "ZIPs"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Running \"%s\" ..."
-msgstr "„%s“ ausfĂŒhren ..."
+msgid ""
+"\n"
+"\n"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Run config tool"
-msgstr "Konfigurationswerkzeug starten"
+msgid ""
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
+msgstr ""
+"\n"
+"Markieren Sie die Druckerwarteschlangen, die sie ĂŒbertragen wollen und "
+"betĂ€tigen Sie die SchaltflĂ€che „Übertragen“."
-#: ../../standalone/harddrake2:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Configure module"
-msgstr "Modul konfigurieren"
+msgid "PDQ"
+msgstr "PDQ"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Information"
-msgstr "Informationen"
+msgid "Albanian"
+msgstr "Albanien"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Detected hardware"
-msgstr "Gefundene Hardware"
+msgid "Lithuania"
+msgstr "Litauen"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "Harddrake2 version "
-msgstr "HardDrake Version "
+msgid "Compact"
+msgstr "Kompakt"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detection in progress"
-msgstr "Erkennung lÀuft"
+msgid "Detected model: %s %s"
+msgstr "Gefundendenes Modell: %s %s"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Author:"
-msgstr "Autor:"
+msgid "MandrakeSoft has selected the best software for you"
+msgstr ""
#: ../../standalone/harddrake2:1
-#, c-format
+#, fuzzy, c-format
msgid ""
"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
msgstr ""
"HardDrake - das Mandrake Linux Hardware-Konfigurationswerkzeug.\n"
"Version:"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "About Harddrake"
-msgstr "Über HardDrake"
+msgid "Local files"
+msgstr "Lokale Dateien"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "/_About..."
-msgstr "/_Über ..."
+msgid "maybe"
+msgstr "eventuell"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "/_Report Bug"
-msgstr "/_Fehler Melden"
+msgid "Panama"
+msgstr "Panama"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
msgstr ""
+"Ihre Grafikkarte scheint einen TV-Ausgang zu haben, der mittels Frame-Buffer "
+"angesprochen werden kann.\n"
+"\n"
+"Wenn Sie das wĂŒnschen, schließen Sie bitte Ihren Fernseher an die "
+"Grafikkarte an, bevor Sie den Rechner neu starten.\n"
+"WĂ€hlen Sie „TV-Ausgang“ im Betriebssystemstarter.\n"
+"\n"
+"Haben Sie einen solchen Ausgang und wollen Sie ihn verwenden?"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Select a device !"
-msgstr "WÀhlen Sie ein GerÀt!"
+msgid "Monitor"
+msgstr "Monitor"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Description of the fields:\n"
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
"\n"
msgstr ""
-"Beschreibung der Felder:\n"
+"Sie sind dabei, einen Drucker einzurichten, der ĂŒber ein Windows-"
+"Benutzerkonto mit Passwort druckt. Aufgrund eines Fehlers in der Architektur "
+"der Samba-Client-Software wird das Passwort im Klartext in die Kommandozeile "
+"der Samba-Komponente eingefĂŒgt, welche die zu druckenden Daten auf den "
+"Windows-Server ĂŒbertrĂ€gt. So ist es fĂŒr jeden Benutzer möglich, das Passwort "
+"auf dem Bildschirm anzuzeigen, indem er Kommandos wie zum Beispiel „ps "
+"auxwww“ ausfĂŒhrt.\n"
+"\n"
+"Wir empfehlen von einer der folgenden Alternativen Gebrauch zu machen (in "
+"allen FĂ€llen muss sichergestellt werden dass nur Maschinen des lokalen "
+"Netzwerks auf den Windows-Server zugreifen können, zum Beispiel mit Hilfe "
+"einer Firewall):\n"
+"\n"
+"Drucken Sie ĂŒber ein Benutzerkonto ohne Passwort auf Ihrem Windows-Server, "
+"zum Beispiel ĂŒber das „GUEST“-Benutzerkonto oder ĂŒber ein speziell zum "
+"Drucken eingerichtetes Benutzerkonto. Entfernen Sie nicht den Passwortschutz "
+"von einem persönlichen Benutzerkonto oder vom Administratorkonto.\n"
+"\n"
+"Richten Sie Ihren Windows-Server so ein, dass der Drucker unter dem LPD-"
+"Protokoll erreichbar ist. Dann richten sie den Drucker auf dieser Maschine "
+"mit dem Verbindungstyp „%s“ ein.\n"
"\n"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Harddrake help"
-msgstr "HardDrake Hilfe"
-
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "/_Fields description"
-msgstr "/_Felderbeschreibung"
+msgid "65 thousand colors (16 bits)"
+msgstr "65.000 Farben (16 Bit)"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/_Help"
-msgstr "/_Hilfe"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
+msgstr ""
+"\n"
+"- Auf Festplatte sichern unter: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "/_Quit"
-msgstr "/_Beenden"
+msgid "Size: %d KB\n"
+msgstr "GrĂ¶ĂŸe: %d KB\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "/_Jazz-Laufwerke automatisch erkennen"
+msgid "Remove fonts on your system"
+msgstr "Entfernen von Schriftarten auf Ihrem Rechner"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "/Autodetect _modems"
-msgstr "/_Modems automatisch erkennen"
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
+msgstr ""
+"Warnung, das NetzwerkgerĂ€t „%s“ ist bereits konfiguriert.\n"
+"\n"
+"Wollen Sie eine automatische Neukonfiguration?\n"
+"\n"
+"Sie können auch eine manuelle Einrichtung vornehmen - dafĂŒr sollten Sie "
+"jedoch wissen, wie das funktioniert."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "/Autodetect _printers"
-msgstr "/_Drucker automatisch erkennen"
+msgid "Graphical interface at startup"
+msgstr "X zur Startzeit"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/_Options"
-msgstr "/_Optionen"
+msgid "Please enter the directory to save:"
+msgstr "Bitte geben Sie das Archivverzeichnis an:"
#: ../../standalone/harddrake2:1
#, c-format
-msgid "the vendor name of the processor"
-msgstr "Herstellername des Prozessors"
+msgid "format of floppies supported by the drive"
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../raid.pm:1
#, c-format
-msgid "the vendor name of the device"
-msgstr "Herstellername des GerÀts"
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "Nicht genĂŒgend Partitionen fĂŒr RAID Level %d\n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "Der Typ des Busses, an dem die Maus angeschlossen ist."
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
+msgstr ""
+"Die folgenden Drucker sind bereits eingerichtet. FĂŒhren Sie einen "
+"Doppelklick auf einem aus, um ihn zu Àndern, als Standarddrucker zu "
+"verwenden oder Informtionen ĂŒber ihn zu erhalten."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
-msgstr ""
+msgid "Connected"
+msgstr "Verbunden"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Model stepping"
-msgstr "Modell-Staffelung"
+msgid "USB printer \\#%s"
+msgstr "USB-Drucker \\#%s"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "the number of the processor"
-msgstr "die Nummer des Prozessors"
+msgid "Macedonian"
+msgstr "Mazedonien"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Processor ID"
+msgid "Bridges and system controllers"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "network printer port"
-msgstr "Port des Netzwerkdruckers"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "the name of the CPU"
-msgstr "Herstellername des GerÀts"
+msgid "/File/_Save"
+msgstr "/Datei/_Speichern"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Name"
-msgstr "Name"
+msgid "Mali"
+msgstr "Mali"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, fuzzy, c-format
-msgid "the number of buttons the mouse has"
-msgstr "die Nummer des Prozessors"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Number of buttons"
-msgstr "Anzahl Tasten"
+msgid "No details"
+msgstr "Details"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Official vendor name of the cpu"
-msgstr "Offizieller Herstellername der CPU"
+msgid "very nice"
+msgstr "sehr angenehm"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Model name"
-msgstr "Modellname"
+msgid "Preview"
+msgstr "Vorschau"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
-msgstr ""
+msgid "Remote Control"
+msgstr "Fernsteuerung"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Model"
-msgstr "Modell"
+msgid "Please select media for backup..."
+msgstr "Bitte wÀhlen Sie ein Sicherungsmedium..."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "hard disk model"
-msgstr "Festplattenmodell"
+msgid "XFree86 server: %s\n"
+msgstr "XFree86 Server: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "class of hardware device"
-msgstr "Hardwareklasse"
+msgid "Allow Thin Clients"
+msgstr "Erlaube Thin Clients"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Media class"
-msgstr "Medienklasse"
+msgid "Georgian (\"Russian\" layout)"
+msgstr "Georgien (Kyrillisches Layout)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Sub generation of the cpu"
-msgstr ""
+msgid "/_Options"
+msgstr "/_Optionen"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Level"
-msgstr "Ebene"
+msgid "Your printer model"
+msgstr "Ihr Druckermodell"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "Format of floppies supported by the drive"
+msgid ""
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
msgstr ""
+"\n"
+"\n"
+"(WARNUNG! Sie verwenden XFS fĂŒr Ihre Verzeichnisbaumwurzel.\n"
+"Das Erstellen einer Startdiskette auf einem 1,44 MB Medium \n"
+"schlĂ€ sicher fehl, da XFS einen sehr großen Treiber benötigt)."
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Floppy format"
-msgstr "Diskettenformat"
-
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"\n"
+"- Delete hard drive tar files after backup.\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Halt bug"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
+#: ../../share/advertising/04-configuration.pl:1
+#, fuzzy, c-format
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "Mandrake Terminal Server Konfiguration"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "F00f bug"
-msgstr ""
+msgid "Save"
+msgstr "Speichern"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
+msgid "The %s is unsupported"
+msgstr "Der Scanner „%s“ wird nicht unterstĂŒtzt"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr ""
+msgid "Load the drivers for your usb devices."
+msgstr "LĂ€dt die Treiber fĂŒr Ihre USB-GerĂ€te."
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr ""
-"Ja bedeutet, dass der Prozessor einen arithmetischen Koprozessor besitzt."
+msgid "Disk"
+msgstr "Festplatten"
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Is FPU present"
-msgstr ""
+msgid "Enter a printer device URI"
+msgstr "Druckeranschluss URI"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Fdiv bug"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "CPU flags reported by the kernel"
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
msgstr ""
+"Der Erfolg von MandrakeSoft basiert auf dem Prinzip freier Software. Ihr "
+"neues Betriebssystem ist das Ergebnis einer weltweiten Zusammenarbeit der "
+"GNU/Linux-Gemeinde."
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Flags"
-msgstr ""
+msgid "Israel"
+msgstr "Israel"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr "Das Linux Kernmodul, das UnterstĂŒtzung fĂŒr dieses GerĂ€t bereitstellt"
+msgid "French Guiana"
+msgstr "Französisch Guiana"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Module"
-msgstr "Modul"
+msgid "default:LTR"
+msgstr "default:LTR"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr "Neuer vom DevFS des Kerns vergebener dynamischer GerÀtename"
+msgid "add a rule"
+msgstr "eine Regel hinzufĂŒgen"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New devfs device"
-msgstr "Neues DevFS GerÀt"
+msgid "A command line must be entered!"
+msgstr "Eine Kommandozeile muss eigegeben werden!"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "old static device name used in dev package"
-msgstr "Alter statischer Name im „dev“ Paket"
+msgid "Select user manually"
+msgstr "Benutzerkennzeichen auswÀhlen"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Old device file"
-msgstr "Alte GerÀtedatei"
+msgid "Transfer printer configuration"
+msgstr "Drucker-Einstellung transferieren"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This field describes the device"
-msgstr "Dieses Feld beschreibt das GerÀt"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "Wollen Sie oben aufgefĂŒhrte Drucker zum Drucken konfigurieren?\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
msgstr ""
-"Die CPU-Frequenz in MHz (Megaherz), sie gibt eine erste NĂ€herung fĂŒr die "
-"anzahl Befehle, die der Prozessor pro Sekunde ausfĂŒhren kann."
+"Damit dies mit einem Windows 2000-DomÀnen-Controller funktioniert, muss der "
+"Administrator folgendes AusfĂŒhren: „C:\\>net localgroup \"Pre-Windows 2000 "
+"Compatible Access\" everyone /add“. Anschließend muss der Server neu "
+"gestartet werden.\n"
+"Damit Sie Ihren Mandrake Linux Rechner zur Windows(TM) DomĂ€ne hinzufĂŒgen "
+"können, benötigen Sie noch Kennzeichen und Passwort eines "
+"DomÀnenadministrators.\n"
+"Sollte das Netzwerk noch nicht aktiv sein, wird DrakX nach der "
+"Netzwerkkonfiguration versuchen, sich in die DomÀne zu integrieren.\n"
+"Sollte dies schief gehen, und die DomÀnenauthentifizierung funktioniert "
+"nicht, verwenden Sie nach der Instalation von Mandrake Linux folgenden "
+"Befehl: „smbpasswd -j DOMÄNE -U KENNZEICEN%%PASSWORT“, wobei „DOMÄNE“ die "
+"Windows(TM) DomĂ€ne ist, „KENNZEICHEN“ und „PASSWORT“ das Kennzeichen und das "
+"Passwort des DomÀnenadministrators.\n"
+"Mit „wbinfo -t“ können Sie anschließend testetn, ob die Anmeldung "
+"erfolgreich war."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Frequency (MHz)"
-msgstr "Frequenz (MHz)"
+msgid "%s (Port %s)"
+msgstr "%s (Port %s)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
-msgstr "Iformationsebene, die durch den Befehl CPUID erhalten werden kann."
+msgid "Use network connection to backup"
+msgstr "Netzwerkverbindung zur Datensicherung verwenden"
-#: ../../standalone/harddrake2:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Cpuid level"
-msgstr "CPUID Ebene"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
+msgstr ""
-#: ../../standalone/harddrake2:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
+"Nun ist es Zeit sich zu entscheiden, welche Programme Sie auf Ihrem Rechner\n"
+"installieren wollen. Es gibt tausende von Paketen fĂŒr Mandrake Linux, und\n"
+"Sie mĂŒssen sie nicht alle auswendig kennen.\n"
+"\n"
+"Die Pakete sind nach ihrer Verwendung in Gruppen eingeteilt. Diese Gruppen\n"
+"wiederum enthalten vier Abschnitte:\n"
+"\n"
+" * „%s“: Falls Ihr Rechner als Arbeitsplatzrechner verwendet werden soll,\n"
+"markieren Sie eine oder mehrere Gruppen.\n"
+"\n"
+" * „%s“: Falls Sie mit Ihrem Rechner programmieren wollen, sollten Sie\n"
+"diese Gruppe markieren.\n"
+"\n"
+" * „%s“: Wenn Ihre Maschine ein Server werden soll, können Sie hier die\n"
+"wichtigsten Dienste auswÀhlen, die auf Ihren Rechner installiert werden\n"
+"sollen.\n"
+"\n"
+" * „%s“: WĂ€hlen Sie hier Ihre bevorzugte grafische ArbeitsoberflĂ€che. Wenn\n"
+"Sie eine grafische OberflĂ€che verwenden wollen, so mĂŒssen Sie hier\n"
+"zumindest eine Gruppe auswÀhlen.\n"
+"\n"
+"Wenn Sie die Maus ĂŒber eine Gruppe bewegen, erhalten Sie einen kurzen\n"
+"erklĂ€renden Text ĂŒber die Gruppe. Falls Sie bei einer Installation alle\n"
+"Markierungen entfernen, erscheint ein Dialog, in dem Sie zwischen\n"
+"verschiedenen Minimalinstallationen wÀhlen können:\n"
+"\n"
+" * „%s“ Installiert eine rudimentĂ€re grafische OberflĂ€che;\n"
+"\n"
+" * „%s“ Installiert das Basissystem zuzĂŒglich grundlegender Werkzeuge\n"
+"inklusive deren Dokumentation. Dies ist die sinnvollste Wahl fĂŒr eine\n"
+"Serverinstallation.\n"
+"\n"
+" * „%s“ Sie erhalten eine komplett „nackte“ 65MB große\n"
+"GNU/Linux-Distribution (speziell auch ohne urpmi!). Es versteht sich von\n"
+"selbst, dass das nur eine Kommandozeileninstallation sein kann.\n"
+"\n"
+"Wenn Sie die SchaltflĂ€che „%s“ anwĂ€hlen, erhalten Sie die Möglichkeit, eine\n"
+"„%s“ durchzufĂŒhren. Das macht nur Sinn, wenn Sie die Pakete genau kennen\n"
+"oder wenn Sie volle Kontrolle darĂŒber haben wollen, was installiert werden\n"
+"soll.\n"
+"\n"
+"Haben Sie die Installation als „%s“ gestartet, können Sie die Markierungen\n"
+"aller Gruppen entfernen, um die Installation neuer Pakete zu vermeiden.\n"
+"Hierdurch werden nur bereits installierte Pakete aktualisiert oder\n"
+"repariert."
+
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
-msgstr "CPU-Familie (6 steht etwa fĂŒr i686)."
+msgid "Accept user"
+msgstr "Benutzer akzeptieren"
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, c-format
-msgid "Cpuid family"
-msgstr "CPUID Familie"
+msgid "Server"
+msgstr "Server"
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr "Angabe, ob der Prozessor den Cyrix 6x86 Coma-Fehler aufweist."
+msgid "Bad choice, try again\n"
+msgstr "Schlechte Wahl, bitte versuchen Sie es noch einmal\n"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Coma bug"
-msgstr "Coma-Fehler"
+msgid "Heard and McDonald Islands"
+msgstr "Heard Island und McDonald Island"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
+msgid "No alternative driver"
+msgstr "Kein alternativer Treiber"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Drive capacity"
-msgstr ""
+msgid "Toggle to expert mode"
+msgstr "In den Experten-Modus wechseln"
-#: ../../standalone/harddrake2:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Size of the (second level) cpu cache"
-msgstr "GrĂ¶ĂŸe des Prozessor-Caches (Second Level)."
+msgid "(on this machine)"
+msgstr "(an diesem Rechner)"
-#: ../../standalone/harddrake2:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Cache size"
-msgstr "CachegrĂ¶ĂŸe"
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "Die IP Adresse des Gateways sollte etwa die Form „192.168.1.42“ haben!"
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
#, c-format
msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+"\"%s\" based winmodem detected, do you want to install needed software ?"
msgstr ""
-"- PCI GerÀte: PCI-Slot, GerÀt und GerÀtetyp\n"
-"- EIDE GerÀte: Master- oder Slave-GerÀt\n"
-"- SCSI GerÀte: Der SCSI-Bus und die GerÀte-ID"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Location on the bus"
-msgstr "Standort auf den Bus"
+msgid "Looking at packages already installed..."
+msgstr "Suche nach bereits installierten Paketen ..."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+msgid "Use Differential Backups"
msgstr ""
-"- PCI und USB GerÀte: Eine Auflistung der IDs der Hersteller, GerÀte, "
-"Subhersteller und SubgerÀte von PCI / USB GerÀten."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Bus identification"
-msgstr "Bus"
+msgid "Driver"
+msgstr "Treiber"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
msgstr ""
+"Linuxconf versucht beim Betriebssystemstart einige Verwaltungsaufgaben \n"
+"auszufĂŒhren."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Bogomips"
-msgstr "Bogomips"
+msgid "Printer on remote lpd server"
+msgstr "Drucker an LPD-Server im Netzwerk"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "EIDE/SCSI Kanal"
+msgid ""
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
+msgstr ""
+"Stellen Sie sicher, das Sie das Recht haben, die Schriften die Sie \n"
+"in Ihr System einbinden wollen, zu verwenden.\n"
+"\n"
+"- Sie können die Schriften auf normalem Weg einbinden. In seltenen FÀllen \n"
+"können defekte Schriften den X-Server lahmlegen."
-#: ../../standalone/harddrake2:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
+msgstr ""
+"Yaboot ist ein BS-Starter fĂŒr NewWorld MacIntosh Rechner. Er kann sowohl\n"
+"GNU/Linux als auch MacOS oder MacOS X starten, falls diese auf Ihrem\n"
+"Rechner installiert sind. Normalerweise werden diese Betriebssysteme alle\n"
+"automatisch gefunden und eingebunden. Sollte dies nicht der Fall sein,\n"
+"können Sie diese hier manuell hinzufĂŒgen. Stellen Sie jedoch sicher, die\n"
+"richtigen Parameter zu verwenden.\n"
+"\n"
+"Die Hauptparameter von yaboot sind:\n"
+"\n"
+" * „%s“: Ein Text, der vor der Eingabeaufforderung angezeigt wird.\n"
+"\n"
+" * „%s“: Hiermit wird angegeben, wohin die Informationen zum Starten Ihres\n"
+"GNU/Linux Systems geschrieben werden sollen.\n"
+"\n"
+" * „%s“: Im Gegensatz zu LILO, stehen mit yaboot zwei Verzögerungen zur\n"
+"VerfĂŒgung. Die erste Verzögerung wird in Sekunden angegeben und dient zur\n"
+"Auswahl zwischen CD, OF Boot, MacOS oder Linux.\n"
+"\n"
+" * „%s“: Diese Verzögerung entspricht der LILO Start-Verzögerung. Sie haben\n"
+"nach der Auswahl von GNU/Linux diese Verzögerung (in 0,1 Sekunden\n"
+"Schritten) Zeit, bis der Standardkern geladen wird.\n"
+"\n"
+" * „%s“: Markieren dieses Punkts erlaubt es Ihnen an der ersten\n"
+"Eingabeaufforderung [C] fĂŒr den Start von CD zu wĂ€hlen.\n"
+"\n"
+" * „%s“: Markieren dieses Punkts erlaubt es Ihnen an der ersten\n"
+"Eingabeaufforderung [N] fĂŒr den Open Firmware Start zu wĂ€hlen.\n"
+"\n"
+" * „%s“: Hiermit stellen Sie ein, welches Betriebssystem nach Ablauf der\n"
+"Open Firmware Verzögerung automatisch gestartet werden soll."
+
+#: ../../mouse.pm:1
#, c-format
-msgid "Channel"
-msgstr "Kanal"
+msgid "No mouse"
+msgstr "Keine Maus"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-msgstr ""
-"Der physikalische Bus, an dem sich das GerÀt befindet (etwa: PCI, USB, ...)"
+msgid "Germany"
+msgstr "Deutschland"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Bus"
-msgstr "Bus"
+msgid "Austria"
+msgstr "Östereich"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "Liste alternativer Soundtreiber fĂŒr diese Soundkarte."
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr ""
+"Starten Sie „sndconfig“ nach der Installation, um Ihre Soundkarte "
+"einzurichten."
-#: ../../standalone/harddrake2:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Alternative drivers"
-msgstr "Alternative Treiber"
+msgid "Collapse Tree"
+msgstr "Baum verkleinern"
-#: ../../standalone/keyboarddrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Wollen Sie, dass die RĂŒcktaste auf den Konsolen Entfernen sendet?"
+msgid "Auto Install Configurator"
+msgstr "Auto-Installationskonfigurator"
-#: ../../standalone/keyboarddrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Bitte wÀhlen Sie Ihren Tastaturtyp."
+msgid "Configure networking"
+msgstr "Netzwerk konfigurieren"
-#: ../../standalone/livedrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Ich bin nicht in der Lage, eine Live Aktualisierung durchzufĂŒhren!!!\n"
+msgid "Where do you want to install the bootloader?"
+msgstr "Wo soll der Betriebssystemstarter installiert werden?"
-#: ../../standalone/livedrake:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
msgstr ""
-"Bitte legen Sie die Installations-CD-ROM in Ihr Laufwerk und drĂŒcken \n"
-"Sie dann „OK“. Falls Sie sie nicht vorliegen haben, drĂŒcken Sie \n"
-"„Abbruch“."
+"WĂ€hlen Sie Ihre bevorzugte Sprache fĂŒr den Installationsvorgang und\n"
+"Systemlaufzeit. WĂ€hlen Sie zuerst die Region, in der Sie sich befinden,\n"
+"anschließend die Sprache, die Sie sprechen.\n"
+"\n"
+"Durch BetĂ€tigen der SchaltflĂ€che „%s“ erhalten Sie die Möglichkeit, weitere\n"
+"Sprachen auf Ihrem Rechner zu installieren, um diese spÀter verwenden zu\n"
+"können. Wollen Sie etwa Spaniern muttersprachlichen Zugang zu Ihrem System\n"
+"erlauben, wÀhlen Sie Deutsch als Hauptsprache in der Liste und im\n"
+"Fortgeschrittenen-Bereich „%s“.\n"
+"\n"
+"Sie sind nicht auf eine weitere Sprache begrenzt. Sie können so viele\n"
+"auswĂ€hlen, wie Sie wollen, ja sogar alle, indem Sie die SchaltflĂ€che „%s“\n"
+"verwenden. Das AuswÀhlen einer Sprache beeinflusst die installierten\n"
+"Übersetzungen der Programme, Schriften, Rechtschreibkorrekturen, etc. Durch\n"
+"Auswahl des MenĂŒpunkts „%s“ wird das System als Standardkodierung UTF-8\n"
+"Verwenden. Es sei angemerkt, dass diese FunktionalitÀt momentan noch als\n"
+"experimentell eingestuft ist. Sollten Sie jedoch verschiedene Sprachen\n"
+"auswĂ€hlen, die unterschiedliche Kodierungen notwendig machen wĂŒrden, wird\n"
+"die Unicode-UnterstĂŒtzung auf jeden Fall installiert.\n"
+"\n"
+"Um die Spracheinstellungen des ganzen Systems zwischen verschiedenen\n"
+"Sprachen umzuschalten, starten Sie einfach „/usr/sbin/localedrake“ unter\n"
+"dem privilegierten Kennzeichen „root“. Wollen Sie die Einstellungen nur fĂŒr\n"
+"ein Kennzeichen Àndern starten Sie den selben Befehl mit eben diesem\n"
+"Kennzeichen."
-#: ../../standalone/livedrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Change Cd-Rom"
-msgstr "CD-ROM wechseln"
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr "Der %s wird nicht von dieser Version von Madrake Linux unterstĂŒzt."
-#: ../../standalone/localedrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-"Die Einstellungen wurden vorgenommen, werden jedoch erst nach einer "
-"Neuanmeldung wirksam"
+msgid "DHCP client"
+msgstr "DHCP Klient"
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Save as.."
-msgstr "Speichern unter..."
+msgid "Restoring from file %s failed: %s"
+msgstr "Restaurieren aus der Datei %s schlug Fehl: %s"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please enter your email address below "
-msgstr "Bitte geben Sie Ihre E-Mail-Adresse ein"
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech Maus (Seriell, alter C7 Typ)"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "alert configuration"
-msgstr "Benachrichtigungskonfiguration"
+msgid "Are you sure that you want to set up printing on this machine?\n"
+msgstr "Sind Sie sicher, dass Sie mit diesem Rechner drucken wollen?\n"
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Sie erhalten eine Nachricht, wen die Load ĂŒber diesen Wert steigt"
+msgid "New devfs device"
+msgstr "Neues DevFS GerÀt"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "load setting"
-msgstr "Einstellungen laden"
+msgid "ERROR: Cannot spawn %s."
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr ""
-"Sie werden benachrichtigt, falls einer der gewÀhlten Dienste nicht mehr lÀuft"
+msgid "Boot Style Configuration"
+msgstr "Konfiguration der Boot-Einstellungen"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Automatic time synchronization"
+msgstr "Automatische Zeit-Synchronisation (durch NTP)"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "service setting"
-msgstr "Dienste einstellen"
+msgid "Backup files not found at %s."
+msgstr "Backup-Dateien nicht unter %s gefunden."
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Xinetd Service"
-msgstr "xinetd"
+msgid "Thank you for choosing Mandrake Linux 9.1"
+msgstr "Danke, dass Sie sich fĂŒr Mandrake Linux 9.1 entschieden haben"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Webmin Service"
-msgstr "Webmin"
+msgid "Armenian (phonetic)"
+msgstr "Armenien (Phonetisch)"
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "SSH Server"
-msgstr "SSH Server"
+msgid "Card model:"
+msgstr "Kartentyp:"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Samba Server"
-msgstr "Samba Server"
+msgid "Thin Client"
+msgstr "Thin Client"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Postfix Mail Server"
-msgstr "Postfix E-Mail-Server"
+msgid "Start Server"
+msgstr "Server starten"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ftp Server"
-msgstr "FTP Server"
+msgid "Turkmenistan"
+msgstr "Turkmenistan"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Domain Name Resolver"
-msgstr "DNS"
+msgid "All remote machines"
+msgstr "Alle entfernten Maschinen"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "Apache Web-Server"
+msgid "Install themes"
+msgstr "Themen installieren"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
msgstr ""
-"Herzlich willkommen zum E-Mail Benachrichtigungsassistenten.\n"
-"\n"
-"Hier können Sie Ihr Benachrichtigungssystem einrichten.\n"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "Mail alert configuration"
-msgstr "Mail Benachrichtigungskonfiguration"
+msgid "Espanol"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mail alert"
-msgstr "E-Mail Benachrichtigung"
+msgid "Preparing installation"
+msgstr "Installation vorbereiten"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "Einen Moment, ich durchsuche: %s"
+msgid "Edit selected host/network"
+msgstr "Änderung der markierten Rechner/Netzwerke"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Content of the file"
-msgstr "Inhalt der LogbĂŒcher"
+msgid "Add User -->"
+msgstr "Benutzer hinzufĂŒgen -->"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Calendar"
-msgstr "Kalender"
+msgid "Nauru"
+msgstr "Nauru"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Choose file"
-msgstr "Dateien wÀhlen"
+msgid "True Type fonts installation"
+msgstr "Installation von TrueType Schriften"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "but not matching"
-msgstr "keine Übereinstimmung mit"
+msgid "Auto-detect printers connected directly to the local network"
+msgstr "Selbsterkennung von Druckern, die im lokalen Netzwerk hÀngen"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "matching"
-msgstr "Übereinstimmung mit"
+msgid "LAN configuration"
+msgstr "LAN Konfiguration"
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Settings"
-msgstr "Einstellungen"
+msgid "hard disk model"
+msgstr "Festplattenmodell"
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "A tool to monitor your logs"
-msgstr "Ihre LogbĂŒcher betrachen"
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr ""
+"Sie können kein logisches LVM Medium fĂŒr den EinhĂ€ngpunkt %s verwenden."
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "search"
-msgstr "Suche starten"
+msgid "Get Windows Fonts"
+msgstr "Windows-Schriften verwenden"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Mandrake Tools Explanation"
-msgstr "ErklÀrung der Mandrake Programme"
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Syslog"
-msgstr "SysLog"
+msgid "Iranian"
+msgstr "Iran"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Messages"
-msgstr "Nachrichten"
+msgid "Croatia"
+msgstr "Kroatien"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "User"
-msgstr "Benutzer"
+msgid "Gateway:"
+msgstr "Gateway:"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Help/_About..."
-msgstr "/Hilfe/_Über ..."
+msgid "Add server"
+msgstr "Server hinzufĂŒgen"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Options/Test"
-msgstr "/Optionen/Test"
+msgid "Remote printer name"
+msgstr "Name des entfernten Druckers"
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "/File/-"
-msgstr "/Datei/-"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together in order to highly reduce hacking risks."
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "/File/Save _As"
-msgstr "/Datei/Speichern _unter ..."
+msgid "Device: "
+msgstr "GerÀt: "
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, c-format
-msgid "<control>S"
-msgstr "<control>S"
+msgid "Printerdrake"
+msgstr "PrinterDrake"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "/File/_Save"
-msgstr "/Datei/_Speichern"
+msgid "License agreement"
+msgstr "Lizenz"
-#: ../../standalone/logdrake:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "<control>O"
-msgstr "<control>O"
+msgid "System Options"
+msgstr "Systemoptionen"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/File/_Open"
-msgstr "/Datei/_Öffnen"
+msgid "Please enter the directory where backups are stored"
+msgstr "Bitte geben Sie das Verzeichnis an, in dem die Sicherungskopien liegen"
-#: ../../standalone/logdrake:1
+#: ../../security/level.pm:1
#, c-format
-msgid "<control>N"
-msgstr "<control>N"
+msgid "Please choose the desired security level"
+msgstr "WĂ€hlen Sie Ihre Sicherheitsebene"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "/File/_New"
-msgstr "/Datei/_Neu"
+msgid "This host is already in the list, it cannot be added again.\n"
+msgstr ""
+"Der Rechner ist bereits in der Liste, er kann nicht erneut hinzugefĂŒgt "
+"werden.\n"
-#: ../../standalone/logdrake:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Show only for the selected day"
-msgstr "Nur fĂŒr diesen Tag zeigen"
+msgid ", USB printer"
+msgstr ", USB-Drucker"
-#: ../../standalone/mousedrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Emulate third button?"
-msgstr "Die dritte Maustaste emulieren?"
+msgid "Choose the applications that will support the fonts:"
+msgstr "WĂ€hlen Sie die Programme, die die Schriften verwenden sollen:"
-#: ../../standalone/mousedrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please choose your mouse type."
-msgstr "Bitte wÀhlen Sie Ihren Maustyp."
+msgid "Configure X"
+msgstr "X konfigurieren"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Connect %s"
-msgstr "Verbinde %s"
+msgid "Turkish (traditional \"F\" model)"
+msgstr "TĂŒrkei (traditionelles „F“ Modell)"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Disconnect %s"
-msgstr "Trenne %s"
+msgid "Congratulations!"
+msgstr "Gratuliere!"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"WARNUNG: Es wurde bereits eine Internetverbindung gefunden. Vielleicht nutzt "
-"diese ihr Netzwerk."
+msgid "Use owner id for execution"
+msgstr "EigentĂŒmer-ID zur AusfĂŒhrung benutzen"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "received"
-msgstr "Empfangen"
+msgid "Down"
+msgstr "Runter"
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "transmitted"
-msgstr "Gesendet"
+msgid "Raw printer (No driver)"
+msgstr "Rohdaten-Drucker (kein Treiber)"
-#: ../../standalone/net_monitor:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "received: "
-msgstr "Enpfangen: "
+msgid "Install rpm"
+msgstr "Installiere RPM"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "sent: "
-msgstr "Gesendet: "
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
+msgstr ""
+"Sie können sowohl den Befehl „%s <datei>“ verwenden, wenn Sie in einer "
+"Konsole die Datei „<datei>“ drucken wollen, als auch ein grafisches "
+"Hilfsprogramm verwenden: „xpp <datei>“ oder „kprinter <datei>“. Die "
+"grafischen Hilfsprogramme erlauben Ihnen auf einfache Weise den richtigen "
+"Drucker zu wÀhlen und die notwendigen Druckerparameter anzugeben.\n"
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Local measure"
-msgstr "Lokale Messung"
+msgid "Time remaining "
+msgstr "Verbleibende Zeit "
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "average"
-msgstr "Durchschnitt"
+msgid "UK keyboard"
+msgstr "Großbritannien"
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Color configuration"
-msgstr "Farbkonfiguration"
+msgid "Unmount"
+msgstr "AushÀngen"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
+msgid "Uninstall Fonts"
+msgstr "Schiften deinstallieren"
-#: ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Connection complete."
-msgstr "Verbindung fertiggestellt."
+msgid "Microsoft Explorer"
+msgstr "Microsoft Explorer"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Disconnection from the Internet complete."
-msgstr "Verbindungstrennung erfolgt."
+msgid "German (no dead keys)"
+msgstr "Deutschland (ohne Akzenttasten)"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disconnection from the Internet failed."
-msgstr "Die Verbindungstrennung schlug fehl!"
+msgid "Transferring %s..."
+msgstr "Übertragen von „%s“ ..."
-#: ../../standalone/net_monitor:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Connecting to the Internet "
-msgstr "Mit dem Internet verbinden"
+msgid "32 thousand colors (15 bits)"
+msgstr "32.000 Farben (15 Bit)"
-#: ../../standalone/net_monitor:1
+#: ../../any.pm:1
#, c-format
-msgid "Disconnecting from the Internet "
-msgstr "Vom Internet trennen"
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
+msgstr ""
+"Sie können die Dateien mittels Samba oder NFS anbieten. Welche Variante "
+"wollen Sie?"
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Bitte warten, Test Ihrer Verbindung..."
+msgid "Reboot"
+msgstr "Systemneustart"
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logs"
-msgstr "Logs"
+msgid "Gambia"
+msgstr "Gambia"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Connection Time: "
-msgstr "Verbindungszeit: "
+msgid "Mandrake Control Center"
+msgstr "Mandrake Kontrollzentrum"
-#: ../../standalone/net_monitor:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Receiving Speed:"
-msgstr "Enpfangsgeschwindigkeit: "
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
+msgstr ""
+"Sie können verschiedene Ports angeben. \n"
+"Korrekte Beispiele sind: 139/tcp 139/udp.\n"
+"FĂŒr weitere Informationen schauen Sie in „/etc/services“."
-#: ../../standalone/net_monitor:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Sending Speed:"
-msgstr "Sendegeschwindigkeit: "
+msgid ""
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
+msgstr ""
+"Monitor\n"
+"\n"
+" DrakX erkennt normalerweise automatisch Ihren Monitor. Sollten dabei\n"
+"Probleme auftreten, können Sie in der hier aufgefĂŒhrten Liste Ihr Modell\n"
+"auswÀhlen."
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Statistics"
-msgstr "Statistiken"
+msgid "\t-Tape \n"
+msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakhelp:1
#, c-format
-msgid "Profile "
-msgstr "Profil "
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
+msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Network Monitoring"
-msgstr "NetzwerkĂŒberwachung"
+msgid "Remember this password"
+msgstr "Passwort behalten"
-#: ../../standalone/printerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Reading data of installed printers..."
-msgstr "Lese Daten installierter Drucker ..."
+msgid "Internet Connection Sharing is now enabled."
+msgstr "Teilen der Internetverbindung ist nun eingeschaltet."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Name/IP address of host:"
-msgstr "Name/IP-Adresse des Rechners:"
+msgid "\t-Network by SSH.\n"
+msgstr "\t- Netzwerk per SSH.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
msgstr ""
-"Der Rechner ist bereits in der Liste, er kann nicht erneut hinzugefĂŒgt "
-"werden.\n"
+"Falls der gewĂŒnschte Drucker bereits gefunden wurde, wĂ€hlen Sie ihn einfach "
+"aus der Liste unten aus und geben Sie - falls notwendig - Name, Passwort und/"
+"oder DomÀne an."
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Scannerdrake"
-msgstr "ScannerDrake"
+msgid "Use the free space on the Windows partition"
+msgstr "Den freien Platz der Windows Partition verwenden"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Sie mĂŒssen einen Rechnernamen oder eine IP eingeben.\n"
+msgid "%s found on %s, configure it automatically?"
+msgstr "%s an %s gefunden. Wolen Sie eine automatische Einrichtung?"
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
msgstr ""
-"WĂ€hlen Sie den Rechner, dem der lokale Scanner bekannt gemacht werden sollen:"
-#: ../../standalone/scannerdrake:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Sharing of local scanners"
-msgstr "Gemeinsamer Zugriff auf lokale Scanner"
+msgid "XFree86 driver: %s\n"
+msgstr "XFree86 Treiber: %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This machine"
-msgstr "Dieser Rechner"
+msgid "This host/network is already in the list, it cannot be added again.\n"
+msgstr ""
+"IP-Adresse bzw. Netzwerk sind bereits in der Liste, \n"
+"Sie können sie nicht erneut hinzufĂŒgen.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Remove selected host"
-msgstr "Löschen des markierten Rechners"
+msgid ""
+"\n"
+" DrakBackup Report \n"
+"\n"
+msgstr ""
+"\n"
+" DrakBackup Report \n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Edit selected host"
-msgstr "Änderung des markierten Rechners"
+msgid "Choose the packages you want to install"
+msgstr "Zu installierende Pakete auswÀhlen"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add host"
-msgstr "HinzufĂŒgen eines Rechners"
+msgid "Papua New Guinea"
+msgstr "Papua-Neuguinea"
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr "Das sind die Rechner, fĂŒr die der Scanner zugĂ€nglich sein soll:"
+msgid "Serbian (cyrillic)"
+msgstr "Serbien (Kyrillisches Layout)"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Usage of remote scanners"
-msgstr "Scanner an anderen Rechnern nutzen"
+msgid "Make kernel message quiet by default"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "All remote machines"
-msgstr "Alle entfernten Maschinen"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
msgstr ""
-"Das sind die Rechner und Netzwerke, fĂŒr die die lokalen Drucker zugĂ€nglich "
-"sein sollen:"
+"Möchten Sie diesen Drucker („%s“)\n"
+"als Standarddrucker verwenden?"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Use the scanners on hosts: "
+msgid "The DHCP end range"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Use scanners on remote computers"
-msgstr ""
+msgid "Creating bootdisk..."
+msgstr "Startdiskette wird erstellt..."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Scanner mit folgenden Rechnern teilen:"
+msgid "Wait please, testing your connection..."
+msgstr "Bitte warten, Test Ihrer Verbindung..."
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr "Die Drucker dieses Rechners sind fĂŒr andere Rechner nutzbar"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Bringing down the network"
+msgstr "Netzwerkverbindung trennen"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
-"Sie können hier entscheiden, ob Drucker von anderen Rechnern automatisch auf "
-"diesem Rechner zur VerfĂŒgung gestellt werden sollen."
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Login ID"
+msgstr "Login ID"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
+#: ../../services.pm:1
+#, c-format
msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
msgstr ""
-"Hier können Sie einstellen, ob die Drucker, die an diesem Rechner hÀngen, "
-"fĂŒr andere Rechner nutzbar sein sollen und falls ja, fĂŒr welche."
+"NFS ist ein gelÀufiges Protokoll in TCP/IP Netzwerken um Dateien \n"
+"durch verschiedene Rechner gemeinsam nutzen zu können. \n"
+"Der Dienst nfslock stellt Ihnen hierfĂŒr Locking-Mechanismen zur \n"
+"VerfĂŒgung, damit eine Datei nicht durch mehrere Personen \n"
+"gleichzeitig verÀndert werden kann."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Re-generating list of configured scanners ..."
-msgstr ""
+msgid "DHCP Client"
+msgstr "DHCP-Klient"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Searching for new scanners ..."
-msgstr "Suche nach neuen Scannern ..."
+msgid "dismiss"
+msgstr "Verwerfen"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for configured scanners ..."
-msgstr "Suche nach eingerichteten Scannern ..."
+msgid "Printing/Scanning on \"%s\""
+msgstr "Drucken/Scannen mit „%s“"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Scanner sharing"
-msgstr "Gemeinsamer Scannerzugriff"
+msgid "omit raid modules"
+msgstr " RAID-Module weglassen "
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
-msgid "Add a scanner manually"
-msgstr "Scanner manuell hinzufĂŒgen"
+msgid ""
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
+msgstr ""
+"Der Dienst LPD ist der Drucker-Server Ihres Rechners. Wenn Sie \n"
+"diesen Dienst abschalten werden DruckauftrÀge nicht mehr abgearbeitet.\n"
+"Hauptaufgabe von LPD ist es, DruckauftrÀge an den jeweiligen \n"
+"zustÀndigen Drucker (dieser kann auch einen anderen Rechner hÀngen) \n"
+"zu senden."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Search for new scanners"
-msgstr "Suche nach neuen Scanern"
+msgid "Internet Connection Configuration"
+msgstr "Konfiguration der Internetverbindung"
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr "Ich konnte keine Scanner direkt an Ihrem Rechner finden.\n"
+msgid "comma separated numbers"
+msgstr "durch Kommas getrennte Nummern"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
msgstr ""
-"Der folgende Scanner\n"
-"\n"
-"%s\n"
-"ist direkt an Ihr System angeschlossen.\n"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule up one level"
+msgstr "Markierte Regel eine Ebene höher verschieben"
#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"The following scanners\n"
+"The following scanner\n"
"\n"
"%s\n"
-"are available on your system.\n"
+"is available on your system.\n"
msgstr ""
-"Die folgenden Scanner\n"
+"Der folgende Scanner\n"
"\n"
"%s\n"
-"sind direkt an Ihr System angeschlossen.\n"
+"ist direkt an Ihr System angeschlossen.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "Möchten Sie den Drucker „%s“ wirklich entfernen?"
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "choose device"
-msgstr "GerÀt wÀhlen"
+msgid "I can't find any room for installing"
+msgstr "Ich finde nicht genug Platz fĂŒr die Installation."
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr "Bitte wĂ€hlen Sie den GerĂ€tenamen, an dem Ihr „%s“ hĂ€ngt."
+msgid "Default printer"
+msgstr "Standarddrucker"
-#: ../../standalone/scannerdrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Searching for scanners ..."
-msgstr "Suche nach neuen Scannern ..."
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Auto-detect available ports"
-msgstr "/Drucker automatisch erkennen"
+msgid ""
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
+msgstr ""
+"Sie haben verschiedene Varianten eingerichtet, sich mit dem\n"
+"Internet zu verbinden. Bitte wÀhlen Sie, welche Verbindungsart\n"
+"ich versuchen soll.\n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr "(Anmerkung: Parallelports können nicht automatisch erkannt werden)"
+msgid "Modify RAID"
+msgstr "RAID modifizieren"
-#: ../../standalone/scannerdrake:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
msgstr ""
-"Der Scanner „%s“ Scanner muss von PrinterDrake konfiguriert werden.\n"
-"Sie können PrinterDrake im Mandrake-Kontrollzentrum im Hardware-Bereich "
-"starten."
+"Ich habe eine PCI ISDN-Karte gefunden, \n"
+"kenne sie jedoch nicht. Bitte helfen Sie mir,\n"
+"indem Sie im nĂ€chsten MenĂŒ eine auswĂ€hlen."
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "The %s is unsupported"
-msgstr "Der Scanner „%s“ wird nicht unterstĂŒtzt"
+msgid "Add user"
+msgstr "Benutzer hinzufĂŒgen"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr "Der %s wird nicht von dieser Version von ScannerDrake unterstĂŒzt."
+msgid "RAID-disks %s\n"
+msgstr "RAID Platten %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
-msgstr "Der %s wird nicht von dieser Version von Madrake Linux unterstĂŒzt."
+msgid "Liberia"
+msgstr "Liberia"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Port: %s"
-msgstr "Port: %s"
+msgid ""
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid ", "
-msgstr ", "
+msgid "Choose your keyboard"
+msgstr "Tastatur auswÀhlen"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Detected model: %s"
-msgstr "Gefundendenes Modell: %s"
+msgid "Format partitions"
+msgstr "Partitionen formatieren"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " ("
-msgstr " ("
+msgid "Automatic correction of CUPS configuration"
+msgstr "Automatische Korrektur der CUPS Konfiguration"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Select a scanner model"
-msgstr "WĂ€hlen Sie einen Scanner"
+msgid "Running \"%s\" ..."
+msgstr "„%s“ ausfĂŒhren ..."
-#: ../../standalone/scannerdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr ""
+msgid "enable radio support"
+msgstr "Radiobetrieb aktivieren"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "%s an %s gefunden. Wolen Sie eine automatische Einrichtung?"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Hardware probing in progress"
-msgstr "Hardwareerkennung lÀuft"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices were added:\n"
-msgstr "Einige GerĂ€te wurden hinzugefĂŒgt:\n"
+msgid "Scanner sharing to hosts: "
+msgstr "Scanner mit folgenden Rechnern teilen:"
-#: ../../standalone/service_harddrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "Einige GerÀte in der Klasse %s wurden entfernt:\n"
+msgid "Loopback file name: %s"
+msgstr "Dateiname des Loopbacks: %s"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
-msgstr ""
-"Der Erfolg von MandrakeSoft basiert auf dem Prinzip freier Software. Ihr "
-"neues Betriebssystem ist das Ergebnis einer weltweiten Zusammenarbeit der "
-"GNU/Linux-Gemeinde."
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "Bitte wÀhlen Sie den Drucker, an den die DruckauftrÀge gehen sollen."
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Welcome to the Open Source world."
-msgstr "Willkommen in der Open Source Welt."
+msgid "Do not transfer printers"
+msgstr "Druckerdaten nicht ĂŒbertragen"
-#: ../../share/advertising/01-thanks.pl:1
-#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr "Danke, dass Sie sich fĂŒr Mandrake Linux 9.1 entschieden haben"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Delay before booting the default image"
+msgstr "Wartezeit vorm Starten des Standard Betriebssystems"
-#: ../../share/advertising/02-community.pl:1
-#, c-format
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+" DUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
msgstr ""
-"Beteiligen Sie sich an den Diskussionsforen, die Sie auf unseren „Community“-"
-"Seiten finden, um Ihre wissen mit Anderen zu teilen."
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-#: ../../share/advertising/02-community.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
-msgstr ""
-"Wollen Sie mehr ĂŒber die Open Source Gemeinde wissen? Betreten Sie die Welt "
-"der Freien Software!"
+msgid "Please check for multisession CD"
+msgstr "fĂŒr Multisession-CD markieren"
-#: ../../share/advertising/02-community.pl:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Build the future of Linux!"
-msgstr ""
+msgid "user"
+msgstr "Benutzer"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
-msgstr ""
-"Mandrake Linux 9.1 reizt Ihren Multimediarechner voll aus! Verwenden Sie die "
-"neuste Software, um Audiodateien abzuspielen, Ihre Fotos und Bilder zu "
-"bearbeiten sowie Videos abzuspielen ..."
+msgid "Use Hard Disk to backup"
+msgstr "Auf Festpaltte sichern"
-#: ../../share/advertising/03-software.pl:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
-msgstr ""
+msgid "Configure"
+msgstr "Konfigurieren"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr ""
+msgid "Scannerdrake"
+msgstr "ScannerDrake"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
-
-#: ../../share/advertising/04-configuration.pl:1
-#, fuzzy, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "Mandrake Terminal Server Konfiguration"
-
-#: ../../share/advertising/05-desktop.pl:1
-#, fuzzy, c-format
-msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"Mandrake Linux 9.1 bietet 11 Arbeitsumgebungen, die Sie nach Ihren WĂŒnschen "
-"gestalten können, darunter: KDE 3, Gnome 2 und WindowMaker"
+"WARNUNG: Es wurde bereits eine Internetverbindung gefunden. Vielleicht nutzt "
+"diese ihr Netzwerk."
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A customizable environment"
-msgstr ""
+msgid "Backup Users"
+msgstr "Benutzerkennzeichen sichern"
-#: ../../share/advertising/06-development.pl:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
msgstr ""
+"Bitte geben Sie ihren Rechnernamen an.\n"
+"Ihr Rechnername sollte auch die Domain beinhalten,\n"
+"etwa „meinrechner.meineabteilung.meinefirma.de“.\n"
+"Falls Sie ein Gateway verwenden, sollten Sie auch dessen IP-Adresse angeben."
-#: ../../share/advertising/06-development.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr "Mandrake Linux 9.1 ist die ultimative Entwicklungsplattform."
+msgid "Select Printer Spooler"
+msgstr "WĂ€hlen Sie das Drucksystem"
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
-msgstr ""
-"Verwandeln Sie Ihren Rechner mit ein paar Mausklicks in einen "
-"leistungsfÀhigen Server: Web, E-Mail, Firewall, Router, Datei- und "
-"Druckserver, ..."
+msgid "Create new theme"
+msgstr "Ein neues Thema erzeugen"
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Turn your computer into a reliable server"
-msgstr "Verwandeln Sie Ihren Rechner in einen zuverlÀssigen Server."
+msgid "Mandrake Tools Explanation"
+msgstr "ErklÀrung der Mandrake Programme"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
-msgstr ""
-"Unser komplettes Angebot an Linux-Lösungen, sowie Sonderangebote und "
-"Fanartikel sind in unseremm e-Store erhÀltlich:"
+msgid "No image found"
+msgstr "Kein Abbild gefunden"
-#: ../../share/advertising/08-store.pl:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "The official MandrakeSoft Store"
-msgstr "Der offizille MandrakeSoft Laden"
-
-#: ../../share/advertising/09-mdksecure.pl:1
-#, fuzzy, c-format
msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
msgstr ""
-"MandrakeSoft arbeitet mit einer Reihe von Firmen zusammen, die "
-"professionelle Linux-Lösungen anbieten, die Mandrake-kompatibel sind. Sie "
-"finden eine Liste im MandrakeStore."
+"Einige wichtige Pakete wurden nicht richtig installiert. \n"
+"Entweder ist Ihr CD-ROM-Laufwerk oder Ihre CD-ROM defekt. \n"
+"Testen Sie die CD-ROM auf einem Linux-Rechner mittels „rpm -qpl \n"
+"Mandrake/rpms/*.rpm“\n"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
-msgstr ""
+msgid "Detected model: %s"
+msgstr "Gefundendenes Modell: %s"
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakedm:1
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Optimize your security by using Mandrake Linux"
-msgstr "Optimieren Sie Ihre Sicherheit"
+msgid "if set to yes, run the daily security checks."
+msgstr ""
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr "Sie erhalten das Produkt in unserem WebShop: MadrakeStore."
+msgid "Azerbaijan"
+msgstr "Aserbaidschan"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
+msgid "No tape in %s!"
msgstr ""
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr ""
+msgid "Dvorak (US)"
+msgstr "Dvorak (USA)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""
+"Der physikalische Bus, an dem sich das GerÀt befindet (etwa: PCI, USB, ...)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr ""
+msgid "How is the printer connected?"
+msgstr "Wie ist der Drucker mit Ihrem Rechner verbunden?"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Become a MandrakeExpert"
-msgstr "Werden Sie ein „MandrakeExpert“"
+msgid "Security level"
+msgstr "Sicherheitsebene"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr ""
-"Alle VorfÀlle werden werden von einem einzelnen qualifizierten MandrakeSoft "
-"Experten bearbeitet."
+msgid "final resolution"
+msgstr "endgĂŒltige Auflösung"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr ""
-"Eine Online-Plattform, die speziell auf die BedĂŒrfnisse von Firmenkunden "
-"zugeschnitten wurde."
+msgid "Services"
+msgstr "Dienste"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "MandrakeExpert Corporate"
+msgid "4 MB"
+msgstr "4 MB"
#: ../../share/compssUsers:999
msgid "Office Workstation"
@@ -19358,10 +19367,6 @@ msgstr ""
"(KSpread, Gnumeric), PDF-Betrachter, usw."
#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Arbeitsplatzrechner"
-
-#: ../../share/compssUsers:999
msgid "Game station"
msgstr "Spiel-Station"
@@ -19436,10 +19441,6 @@ msgstr ""
"zugehöriger Programme"
#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafische ArbeitsoberflÀche"
-
-#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Gnome-Arbeitsplatz"
@@ -19459,10 +19460,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm, usw."
#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Entwicklungsplattform"
-
-#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "C und C++ Entwicklung: Bibliotheken, Programme und Include-Dateien"
@@ -19534,847 +19531,74 @@ msgstr "NFS-Server, SMB-Server, Proxy-Server, SSH-Server"
#: ../../share/compssUsers:999
#, fuzzy
-msgid "Audio station"
-msgstr "Multimediarechner"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Sound playing/editing programs"
-msgstr "Sound- und Video-Abspieler/Editoren"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Video station"
-msgstr "Spiel-Station"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Video playing programs"
-msgstr "Sound- und Video-Abspieler/Editoren"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Graphic station"
-msgstr "Spiel-Station"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Graphics programs"
-msgstr "Bildverarbeitungsprogramme wie der GIMP"
-
-#: ../../share/compssUsers:999
-#, fuzzy
msgid "Set of tools to read and send mail and news and to browse the Web"
msgstr ""
"Programme zum E-Mail bzw. News lesen und senden (pine, mutt, tin, ...)sowie "
"zum durchstöbern des WWW"
-#~ msgid "Printer sharing"
-#~ msgstr "Gemeinsamer Druckerzugriff"
-
-#~ msgid ""
-#~ "Your printer belongs to the group of GDI laser printers (winprinters) "
-#~ "sold by different manufacturers which uses the Zenographics ZJ-stream "
-#~ "raster format for the data sent to the printer. The driver for these "
-#~ "printers is still in a very early development stage and so it will "
-#~ "perhaps not always work properly. Especially it is possible that the "
-#~ "printer only works when you choose the A4 paper size.\n"
-#~ "\n"
-#~ "Some of these printers, as the HP LaserJet 1000, for which this driver "
-#~ "was originally created, need their firmware to be uploaded to them after "
-#~ "they are turned on. In the case of the HP LaserJet 1000 you have to "
-#~ "search the printer's Windows driver CD or your Windows partition for the "
-#~ "file \"sihp1000.img\" and upload the file to the printer with one of the "
-#~ "following commands:\n"
-#~ "\n"
-#~ " lpr -o raw sihp1000.img\n"
-#~ " cat sihp1000.img > /dev/usb/lp0\n"
-#~ "\n"
-#~ "The first command can be given by any normal user, the second must be "
-#~ "given as root. After having done so you can print normally.\n"
-#~ msgstr ""
-#~ "Ihr Drucker gehört zu der Gruppe von GDI-Laserdruckern (winprinters), "
-#~ "welche das Zenographics-ZJ-Stream-Rasterformat fĂŒr die zum Drucker zu "
-#~ "ĂŒbertragenden Daten erwarten. Der Treiber fĂŒr dieses Format ist noch in "
-#~ "einem frĂŒhen Entwicklungsstadium und daher wird er wahrscheinlich nicht "
-#~ "immer perfekt funktionieren. Insbesondere ist es möglich, dass der "
-#~ "Drucker nur funktioniert, wenn Sie A4 als Papierformat wÀhlen.\n"
-#~ "\n"
-#~ "Bei einige dieser Drucker, wie zum Beispiel der HP LaserJet 1000, fĂŒr den "
-#~ "dieser Treiber ursprĂŒnglich entwickelt wurde, muss die Firmware nach "
-#~ "jedem Einschalten in den Drucker geladen werden. Im Falle des HP "
-#~ "LaserJet 1000 mĂŒssen Sie die mit dem Drucker mitgelieferte Windows-"
-#~ "Treiber-CD oder Ihre Windows-Partition nach der Datei sihp1000.img "
-#~ "durchsuchen und diese mit einem der folgenden Kommandos in den Drucker "
-#~ "laden:\n"
-#~ "\n"
-#~ " lpr -o raw sihp1000.img\n"
-#~ " cat sihp1000.img > /dev/usb/lp0\n"
-#~ "\n"
-#~ "Das erste Kommando kann von jedem Benutzer gegeben werden, das Zweite "
-#~ "muss als root gegeben werden. Danach können Sie dann ganz normal "
-#~ "drucken.\n"
-
-#~ msgid "GDI Laser Printer using the Zenographics ZJ-Stream Format"
-#~ msgstr "GDI-Laserdrucker, der das Zenographics-ZJ-Stream-Format benutzt"
-
-#~ msgid "Office"
-#~ msgstr "Office"
-
-#~ msgid "Set of tools for mail, news, web, file transfer, and chat"
-#~ msgstr "Programme fĂŒr Mail, News, WWW, FTP und Chat"
-
-#~ msgid "Games"
-#~ msgstr "Spiele"
-
-#~ msgid "Multimedia - Graphics"
-#~ msgstr "Multimedia / Grafik"
-
-#~ msgid "Multimedia - Sound"
-#~ msgstr "Multimedia / Sound"
-
-#~ msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-#~ msgstr "Audio Programme: MP3- und Midi-Abspieler, Mixer, usw."
-
-#~ msgid "Multimedia - Video"
-#~ msgstr "Multimedia / Video"
-
-#~ msgid "Video players and editors"
-#~ msgstr "Videoabspieler und Editoren"
-
-#~ msgid "Multimedia - CD Burning"
-#~ msgstr "Multimedia / CD-Brenner"
-
-#~ msgid "Tools to create and burn CD's"
-#~ msgstr "Werkzeuge zur Erstellung und zum Brennen von CDs"
-
-#~ msgid "More Graphical Desktops (Gnome, IceWM)"
-#~ msgstr "Weitere ArbeitsoberflÀchen (GNOME, IceWM)"
-
-#~ msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-#~ msgstr "GNOME, IceWM, Window Maker, Enlightenment, Fvwm, usw."
-
-#~ msgid "Personal Information Management"
-#~ msgstr "Persönliches Informationsmanagement"
-
-#~ msgid "Tools for your Palm Pilot or your Visor"
-#~ msgstr "Werkzeuge fĂŒr Ihren Palm Pilot oder Ihren Visor"
-
-#~ msgid "Personal Finance"
-#~ msgstr "Finanzverwaltung"
-
-#~ msgid "Programs to manage your finances, such as gnucash"
-#~ msgstr "Finanzverwaltungsprogramme, etwa Gnucash"
-
-#~ msgid "no network card found"
-#~ msgstr "Keine Netzwerkkarte gefunden"
-
-#~ msgid ""
-#~ "Mandrake Linux 9.1 has selected the best software for you. Surf the Web "
-#~ "and view animations with Mozilla and Konqueror, or read your mail and "
-#~ "handle your personal information with Evolution and Kmail"
-#~ msgstr ""
-#~ "Mandrake Linux 9.1 stellt Ihnen die beste Softwareauswahl bereit, um auf "
-#~ "alles, was das Internet bietet, zugreifen zu können. Surfen Sie im Web "
-#~ "mit Mozilla oder Konqueror, bearbeiten Sie E-Mails und verwalten Sie "
-#~ "persönliche Informationen mit Evolution, KMail oder zahlreichen anderen "
-#~ "Programmen."
-
-#~ msgid "Get the most from the Internet"
-#~ msgstr "Nutzen Sie das Internet nach Ihren WĂŒnschen"
-
-#~ msgid "Push multimedia to its limits!"
-#~ msgstr "Gehen Sie bis an die Grenzen Ihrer multimedialen Möglichkeiten"
+#~ msgid "Internet connection & configuration"
+#~ msgstr "Internetverbindung und -einrichtung"
-#~ msgid "Discover the most up-to-date graphical and multimedia tools!"
-#~ msgstr "Entdecken Sie die atuellsten Grafik- und Multimedia-Programme!"
-
-#~ msgid ""
-#~ "Mandrake Linux 9.1 provides the best Open Source games - arcade, action, "
-#~ "strategy, ..."
-#~ msgstr ""
-#~ "Mandrake Linux 9.1 bietet die besten Open Source Spiele der Bereiche: "
-#~ "Arcade, Karten, Action, Strategie, ..."
+#~ msgid "Configure the connection"
+#~ msgstr "Die Verbindung konfigurieren"
-#~ msgid ""
-#~ "Mandrake Linux 9.1 provides a powerful tool to fully customize and "
-#~ "configure your machine"
-#~ msgstr ""
-#~ "Das Mandrake Linux Kontrollzentrum ist der zentrale Ort, an dem Sie Ihr "
-#~ "System nach Ihren WĂŒnschen anpassen können."
-
-#~ msgid "User interfaces"
-#~ msgstr "Arbeitsumgebungen"
-
-#~ msgid ""
-#~ "Use the full power of the GNU gcc 3 compiler as well as the best Open "
-#~ "Source development environments"
-#~ msgstr ""
-#~ "Mandrake Linux 9.1 ist die ultimative Entwicklungsplattform. Nutzen Sie "
-#~ "die volle Power des GNU C Compilers sowie der besten Open Source "
-#~ "Entwicklungsumgebungen."
+#~ msgid "Disconnect"
+#~ msgstr "Verbindung trennen"
-#~ msgid "Development simplified"
-#~ msgstr "Softwareentwicklung leicht gemacht"
+#~ msgid "Connect"
+#~ msgstr "Verbinden"
#~ msgid ""
-#~ "This firewall product includes network features that allow you to fulfill "
-#~ "all your security needs"
-#~ msgstr ""
-#~ "Dieses Firewall-Produkt enthÀlt die Netzwerkkomponenten, um all Ihren "
-#~ "SicherheitsansprĂŒchen gerecht werden zu können."
-
-#~ msgid ""
-#~ "The MandrakeSecurity range includes the Multi Network Firewall product (M."
-#~ "N.F.)"
-#~ msgstr ""
-#~ "Die MandrakeSecurity Palette bietet unter Anderem die „Multi Network "
-#~ "Firewall“ (M.N.F.)"
-
-#~ msgid "Strategic partners"
-#~ msgstr "Strategische Partner"
-
-#~ msgid ""
-#~ "Whether you choose to teach yourself online or via our network of "
-#~ "training partners, the Linux-Campus catalogue prepares you for the "
-#~ "acknowledged LPI certification program (worldwide professional technical "
-#~ "certification)"
-#~ msgstr ""
-#~ "Ob Sie sich online fortbilden wollen, oder mit Hilfe unseres Netzes an "
-#~ "Trainingspartnern, der Linux-Campus Katalog bereitet Sie auf die "
-#~ "anerkannte LPI zerifizierung vor."
-
-#~ msgid "Certify yourself on Linux"
-#~ msgstr "Zertifizueren Sie sich selbst in Sachen Linux"
-
-#~ msgid ""
-#~ "The training program has been created to respond to the needs of both end "
-#~ "users and experts (Network and System administrators)"
-#~ msgstr ""
-#~ "Das Trainingsprogramm wurde fĂŒr die BedĂŒrfnisse sowohl von Endanwendern, "
-#~ "als auch von Experten (Netzwerk- und Systemadministratoren)"
-
-#~ msgid "Discover MandrakeSoft's training catalogue Linux-Campus"
-#~ msgstr "Entdecken Sie MandrakeSofts Training-Katalog: Linux-Campus"
-
-#~ msgid "Discover MandrakeClub and Mandrake Corporate Club"
-#~ msgstr "Entdecken Sie den MandrakeClub und den Mandrake Corporate Club"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#, fuzzy
-#~ msgid ""
-#~ "As a review, DrakX will present a summary of various information it has\n"
-#~ "about your system. Depending on your installed hardware, you may have "
-#~ "some\n"
-#~ "or all of the following entries:\n"
-#~ "\n"
-#~ " * \"Mouse\": check the current mouse configuration and click on the "
-#~ "button\n"
-#~ "to change it if necessary.\n"
-#~ "\n"
-#~ " * \"Keyboard\": check the current keyboard map configuration and click "
-#~ "on\n"
-#~ "the button to change that if necessary.\n"
-#~ "\n"
-#~ " * \"Country\": check the current country selection. If you are not in "
-#~ "this\n"
-#~ "country, click on the button and choose another one.\n"
-#~ "\n"
-#~ " * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-#~ "primary language you have chosen. But here, just as in your choice of a\n"
-#~ "keyboard, you may not be in a country to which the chosen language\n"
-#~ "corresponds. You may need to click on the \"Timezone\" button to\n"
-#~ "configure the clock for the correct timezone.\n"
-#~ "\n"
-#~ " * \"Printer\": clicking on the \"No Printer\" button will open the "
-#~ "printer\n"
-#~ "configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-#~ "Guide'' for more information on how to setup a new printer. The "
-#~ "interface\n"
-#~ "presented there is similar to the one used during installation.\n"
#~ "\n"
-#~ " * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-#~ "click that button. This should be reserved to advanced users.\n"
-#~ "\n"
-#~ " * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-#~ "interface in \"800x600\" resolution. If that does not suits you, click "
-#~ "on\n"
-#~ "the button to reconfigure your graphical interface.\n"
-#~ "\n"
-#~ " * \"Network\": If you want to configure your Internet or local network\n"
-#~ "access now, you can by clicking on this button.\n"
-#~ "\n"
-#~ " * \"Sound card\": if a sound card is detected on your system, it is\n"
-#~ "displayed here. If you notice the sound card displayed is not the one "
-#~ "that\n"
-#~ "is actually present on your system, you can click on the button and "
-#~ "choose\n"
-#~ "another driver.\n"
-#~ "\n"
-#~ " * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-#~ "here. If you have a TV card and it is not detected, click on the button "
-#~ "to\n"
-#~ "try to configure it manually.\n"
-#~ "\n"
-#~ " * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-#~ "displayed here. You can click on the button to change the parameters\n"
-#~ "associated with the card."
+#~ "You can reconfigure your connection."
#~ msgstr ""
-#~ "Hier bekommen Sie verschiedene Parameter Ihres Systems angezeigt. Je "
-#~ "nach\n"
-#~ "vorhandener Hardware sehen Sie hier (oder eben nicht) folgende EintrÀge:\n"
-#~ "\n"
-#~ " * „Maus“: Kontrollieren Sie die Mauskonfiguration und drĂŒcken Sie den "
-#~ "Knopf,\n"
-#~ "um sie, wenn nötig, zu Àndern;\n"
#~ "\n"
-#~ " * „Tastatur“: Kontrollieren Sie die aktuelle Tastaturkonfiguration "
-#~ "drĂŒcken Sie\n"
-#~ "den Knopf, um sie, wenn nötig, zu Àndern;\n"
-#~ "\n"
-#~ " * „Zeitzone“: DrakX versucht die Zeitzone anhand der gewĂ€hlten Sprache\n"
-#~ "zu erraten. Aber hier, genau wie bei der Tastatur, ist es jedoch möglich, "
-#~ "dass\n"
-#~ "Sie sich nicht in dem Land befinden, zu dem die vorgegebene Sprache "
-#~ "erahnen\n"
-#~ "gehört. In diesem Fall sollten Sie den Knopf drĂŒcken, um die Uhr "
-#~ "entsprechend\n"
-#~ "Ihrer lokalen Zeitzone zu setzen.\n"
-#~ "\n"
-#~ " * „Drucker“: Durch Anwahl der SchaltflĂ€che „Kein Drucker“ starten Sie "
-#~ "den\n"
-#~ "Druckerassistenten. FĂŒr mehr Informationen, wie man einen neuen Drucker\n"
-#~ "einrichtet, schlagen Sie im dazugehörige Kapitel aus dem „Starter Guide“\n"
-#~ "nach. Die dort prÀsentierte Schnittstelle Àhnelt der, die wÀhrend der "
-#~ "Installation\n"
-#~ "verwendet wird; \n"
-#~ " * „Soundkarte“: Falls eine Soundkarte in Ihrem Rechner gefunden wurde,\n"
-#~ "wird sie hier angezeigt.\n"
-#~ "\n"
-#~ " * „TV-Karte“: Falls eine TV-Karte in Ihrem Rechner gefunden wurde, wird\n"
-#~ "sie hier angezeigt.\n"
-#~ "\n"
-#~ " * „ISDN Karte“: Falls eine ISDN Karte in Ihrem Rechner gefunden wurde,\n"
-#~ "wird sie hier angezeigt. Durch Anwahl der SchaltflÀche können Sie die\n"
-#~ "Parameter Àndern."
+#~ "Sie können Ihre Internetverbindung neu konfigurieren"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#, fuzzy
#~ msgid ""
-#~ "LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-#~ "automated. DrakX will analyze the disk boot sector and act according to\n"
-#~ "what it finds there:\n"
-#~ "\n"
-#~ " * if a Windows boot sector is found, it will replace it with a grub/"
-#~ "LILO\n"
-#~ "boot sector. This way you will be able to load either GNU/Linux or "
-#~ "another\n"
-#~ "OS.\n"
-#~ "\n"
-#~ " * if a grub or LILO boot sector is found, it will replace it with a new\n"
-#~ "one.\n"
-#~ "\n"
-#~ "If it cannot make a determination, DrakX will ask you where to place the\n"
-#~ "bootloader.\n"
-#~ "\n"
-#~ "\"Boot device\": in most cases, you will not change the default (\"First\n"
-#~ "sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-#~ "installed on the second hard drive (\"/dev/hdb\"), or even on a floppy "
-#~ "disk\n"
-#~ "(\"On Floppy\").\n"
-#~ "\n"
-#~ "Checking \"Create a boot disk\" allows you to have a rescue boot media\n"
-#~ "handy.\n"
-#~ "\n"
-#~ "The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it "
-#~ "by\n"
-#~ "booting the CD-ROM, pressing the >> F1<< key at boot and typing "
-#~ ">>rescue<<\n"
-#~ "at the prompt. If your computer cannot boot from the CD-ROM, there are "
-#~ "at\n"
-#~ "least two situations where having a boot floppy is critical:\n"
#~ "\n"
-#~ " * when installing the bootloader, DrakX will rewrite the boot sector "
-#~ "(MBR)\n"
-#~ "of your main disk (unless you are using another boot manager), to allow "
-#~ "you\n"
-#~ "to start up with either Windows or GNU/Linux (assuming you have Windows "
-#~ "on\n"
-#~ "your system). If at some point you need to reinstall Windows, the "
-#~ "Microsoft\n"
-#~ "install process will rewrite the boot sector and remove your ability to\n"
-#~ "start GNU/Linux!\n"
-#~ "\n"
-#~ " * if a problem arises and you cannot start GNU/Linux from the hard "
-#~ "disk,\n"
-#~ "this floppy will be the only means of starting up GNU/Linux. It contains "
-#~ "a\n"
-#~ "fair number of system tools for restoring a system that has crashed due "
-#~ "to\n"
-#~ "a power failure, an unfortunate typing error, a forgotten root password, "
-#~ "or\n"
-#~ "any other reason.\n"
-#~ "\n"
-#~ "If you say \"Yes\", you will be asked to insert a disk in the drive. The\n"
-#~ "floppy disk must be blank or have non-critical data on it - DrakX will\n"
-#~ "format the floppy and will rewrite the whole disk."
+#~ "You can connect to the Internet or reconfigure your connection."
#~ msgstr ""
-#~ "Die Mandrake Linux CD-ROM hat einen eingebauten Rettungsmo­dus. Sie\n"
-#~ "erreichen ihn durch Starten von CD-ROM, und DrĂŒcken von »F1« bei\n"
-#~ "Bootbeginn. Geben Sie dann »rescue« an der Eingabeaufforderung ein. "
-#~ "Falls\n"
-#~ "Ihr Rechner nicht von CD-ROM starten kann, sollten Sie diesen Punkt\n"
-#~ "unbedingt aus zwei GrĂŒnden abarbeiten:\n"
-#~ "\n"
-#~ " * Wenn DrakX den Betriebssystemstarter installiert, schreibt es den\n"
-#~ "Boot-Sektor (MBR) Ihrer primĂ€ren Festplatte neu (außer Sie wollen einen\n"
-#~ "anderen Betriebssystemstarter verwenden), damit Sie die verschiedenen,\n"
-#~ "vorhandenen Betriebssysteme starten können (etwa Windows und GNU/Linux).\n"
-#~ "Sollten Sie etwa Windows neu installieren, wird dieses - ohne Sie zu "
-#~ "fragen\n"
-#~ "- Ihren Boot-Sektor ĂŒberschreiben. Somit werden Sie Ihr GNU/Linux nicht\n"
-#~ "mehr starten können! Mit einer Startdiskette können Sie Ihr\n"
-#~ "GNU/Linux-System dann trotzdem hochfahren und diese Änderungen "
-#~ "rĂŒckgĂ€ngig\n"
-#~ "machen.\n"
#~ "\n"
-#~ " * Sollten Ihnen andere schwerwiegende Systemfehler das Starten von\n"
-#~ "GNU/Linux von der Festplatte unmöglich machen, ist diese Startdiskette "
-#~ "so\n"
-#~ "ziemlich die einzige Möglichkeit, auf Ihr System zuzugreifen. Zudem "
-#~ "enthÀlt\n"
-#~ "sie eine Anzahl von Systemprogrammen, die Ihnen bei der Behebung von\n"
-#~ "Systemfehlern (nach einem Stromausfall, einen unglĂŒcklichen Tippfehler "
-#~ "in\n"
-#~ "einem Passwort, etc.) helfen werden.\n"
-#~ "\n"
-#~ "Wenn Sie diesen Schritt anwĂ€hlen, wird „DrakX“ Sie bitten, eine Diskette "
-#~ "in\n"
-#~ "ein Laufwerk zu legen. Die Diskette sollte natĂŒrlich leer sein "
-#~ "(zumindest\n"
-#~ "keine relevanten Daten enthalten). Sie muss nicht formatiert sein, "
-#~ "„DrakX“\n"
-#~ "kĂŒmmert sich um alles."
+#~ "Sie können eine Internetverbindung aufbauen oder die Verbindung neu "
+#~ "konfigurieren"
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "Sie sind momentan nicht mit dem Internet verbunden."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#, fuzzy
#~ msgid ""
-#~ "Checking \"Create a boot disk\" allows you to have a rescue boot media\n"
-#~ "handy.\n"
-#~ "\n"
-#~ "The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it "
-#~ "by\n"
-#~ "booting the CD-ROM, pressing the >> F1<< key at boot and typing "
-#~ ">>rescue<<\n"
-#~ "at the prompt. If your computer cannot boot from the CD-ROM, there are "
-#~ "at\n"
-#~ "least two situations where having a boot floppy is critical:\n"
#~ "\n"
-#~ " * when installing the bootloader, DrakX will rewrite the boot sector "
-#~ "(MBR)\n"
-#~ "of your main disk (unless you are using another boot manager), to allow "
-#~ "you\n"
-#~ "to start up with either Windows or GNU/Linux (assuming you have Windows "
-#~ "on\n"
-#~ "your system). If at some point you need to reinstall Windows, the "
-#~ "Microsoft\n"
-#~ "install process will rewrite the boot sector and remove your ability to\n"
-#~ "start GNU/Linux!\n"
-#~ "\n"
-#~ " * if a problem arises and you cannot start GNU/Linux from the hard "
-#~ "disk,\n"
-#~ "this floppy will be the only means of starting up GNU/Linux. It contains "
-#~ "a\n"
-#~ "fair number of system tools for restoring a system that has crashed due "
-#~ "to\n"
-#~ "a power failure, an unfortunate typing error, a forgotten root password, "
-#~ "or\n"
-#~ "any other reason.\n"
-#~ "\n"
-#~ "If you say \"Yes\", you will be asked to insert a disk in the drive. The\n"
-#~ "floppy disk must be blank or have non-critical data on it - DrakX will\n"
-#~ "format the floppy and will rewrite the whole disk."
+#~ "You can disconnect or reconfigure your connection."
#~ msgstr ""
-#~ "Die Mandrake Linux CD-ROM hat einen eingebauten Rettungsmo­dus. Sie\n"
-#~ "erreichen ihn durch Starten von CD-ROM, und DrĂŒcken von »F1« bei\n"
-#~ "Bootbeginn. Geben Sie dann »rescue« an der Eingabeaufforderung ein. "
-#~ "Falls\n"
-#~ "Ihr Rechner nicht von CD-ROM starten kann, sollten Sie diesen Punkt\n"
-#~ "unbedingt aus zwei GrĂŒnden abarbeiten:\n"
-#~ "\n"
-#~ " * Wenn DrakX den Betriebssystemstarter installiert, schreibt es den\n"
-#~ "Boot-Sektor (MBR) Ihrer primĂ€ren Festplatte neu (außer Sie wollen einen\n"
-#~ "anderen Betriebssystemstarter verwenden), damit Sie die verschiedenen,\n"
-#~ "vorhandenen Betriebssysteme starten können (etwa Windows und GNU/Linux).\n"
-#~ "Sollten Sie etwa Windows neu installieren, wird dieses - ohne Sie zu "
-#~ "fragen\n"
-#~ "- Ihren Boot-Sektor ĂŒberschreiben. Somit werden Sie Ihr GNU/Linux nicht\n"
-#~ "mehr starten können! Mit einer Startdiskette können Sie Ihr\n"
-#~ "GNU/Linux-System dann trotzdem hochfahren und diese Änderungen "
-#~ "rĂŒckgĂ€ngig\n"
-#~ "machen.\n"
#~ "\n"
-#~ " * Sollten Ihnen andere schwerwiegende Systemfehler das Starten von\n"
-#~ "GNU/Linux von der Festplatte unmöglich machen, ist diese Startdiskette "
-#~ "so\n"
-#~ "ziemlich die einzige Möglichkeit, auf Ihr System zuzugreifen. Zudem "
-#~ "enthÀlt\n"
-#~ "sie eine Anzahl von Systemprogrammen, die Ihnen bei der Behebung von\n"
-#~ "Systemfehlern (nach einem Stromausfall, einen unglĂŒcklichen Tippfehler "
-#~ "in\n"
-#~ "einem Passwort, etc.) helfen werden.\n"
-#~ "\n"
-#~ "Wenn Sie diesen Schritt anwĂ€hlen, wird „DrakX“ Sie bitten, eine Diskette "
-#~ "in\n"
-#~ "ein Laufwerk zu legen. Die Diskette sollte natĂŒrlich leer sein "
-#~ "(zumindest\n"
-#~ "keine relevanten Daten enthalten). Sie muss nicht formatiert sein, "
-#~ "„DrakX“\n"
-#~ "kĂŒmmert sich um alles."
-
-#~ msgid ""
-#~ "The following printers are configured. Double-click on a printer to "
-#~ "change its settings; to make it the default printer; to view information "
-#~ "about it; or to make a printer on a remote CUPS server available for Star "
-#~ "Office/OpenOffice.org/GIMP."
-#~ msgstr ""
-#~ "Die folgenden Drucker sind bereits eingerichtet. FĂŒhren Sie einen "
-#~ "Doppelklick auf einem aus, um ihn zu Àndern, als Standarddrucker zu "
-#~ "verwenden, Informtionen ĂŒber ihn zu erhalten oder einen entfernten CUPS-"
-#~ "Drucker fĂŒr Star Office/OpenOffice.org/GIMP zugĂ€nglich zu machen."
-
-#~ msgid ""
-#~ "Please enter your host name if you know it.\n"
-#~ "Some DHCP servers require the hostname to work.\n"
-#~ "Your host name should be a fully-qualified host name,\n"
-#~ "such as ``mybox.mylab.myco.com''."
-#~ msgstr ""
-#~ "Bitte geben Sie ihren Rechnernamen an.\n"
-#~ "Einige DHCP-Server benötigen ihn, um korrekt zu arbeiten.\n"
-#~ "Ihr Rechnername sollte auch die Domain beinhalten,\n"
-#~ "etwa „meinrechner.meineabteilung.meinefirma.de“."
-
-#~ msgid "DrakFloppy Error: %s"
-#~ msgstr "DrakFloppy Fehler: %s"
-
-#~ msgid "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"
-#~ msgstr "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"
-
-#~ msgid "Launch Aurora at boot time"
-#~ msgstr "Aurora beim Hochfahren starten"
-
-#~ msgid "Traditional Gtk+ Monitor"
-#~ msgstr "Herkömmlicher Gtk+ Stil"
-
-#~ msgid "Traditional Monitor"
-#~ msgstr "Herkömmlicher Stil"
-
-#~ msgid "NewStyle Monitor"
-#~ msgstr "Neuer Stil"
-
-#~ msgid "NewStyle Categorizing Monitor"
-#~ msgstr "Neuer kategorisierter Monitor"
-
-#~ msgid "Secure Connection"
-#~ msgstr "Sichere Verbindung"
-
-#~ msgid "FTP Connection"
-#~ msgstr "FTP Verbindung"
-
-#~ msgid "Mail/Groupware/News"
-#~ msgstr "Server, Mail/Groupware/News"
-
-#~ msgid "Postfix mail server, Inn news server"
-#~ msgstr ""
-#~ "Postfix E-Mail-Server und\n"
-#~ "Inn Diskussionsforen-Server"
-
-#~ msgid "/Options"
-#~ msgstr "/Optionen"
-
-#~ msgid "/Autodetect jazz drives"
-#~ msgstr "/Jazz-Laufwerke automatisch erkennen"
-
-#~ msgid "/Autodetect modems"
-#~ msgstr "/Modems automatisch erkennen"
-
-#~ msgid "/Autodetect printers"
-#~ msgstr "/Drucker automatisch erkennen"
-
-#~ msgid ""
-#~ "The partition you've selected to add as root (/) is physically located "
-#~ "beyond\n"
-#~ "the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-#~ "If you plan to use the LILO boot manager, be careful to add a /boot "
-#~ "partition"
-#~ msgstr ""
-#~ "Die Partition, die Sie als Verzeichnisbaumwurzel (/) ausgewÀhlt haben, "
-#~ "ist physikalisch hinter dem 1024ten Zylinder Ihrer Festplatte gelegen und "
-#~ "Sie haben keine „/boot“ Partition eingerichtet. Falls Sie den LILO "
-#~ "Betriebssystemstarter einsetzen wollen, vergessen Sie bitte nicht, eine „/"
-#~ "boot“ Partition anzulegen!"
-
-#~ msgid ""
-#~ "Sorry I won't accept to create /boot so far onto the drive (on a cylinder "
-#~ "> 1024).\n"
-#~ "Either you use LILO and it won't work, or you don't use LILO and you "
-#~ "don't need /boot"
-#~ msgstr ""
-#~ "Es tut mir Leid, aber ich weigere mich, eine „/boot“ Partition \n"
-#~ "hinter dem Zylinder 1024 anzulegen.\n"
-#~ "Entweder verwenden Sie LILO und es wird nicht funktionieren, oder Sie "
-#~ "verwenden \n"
-#~ "LILO nicht, dann benötigen Sie keine „/boot“ Partition."
-
-#~ msgid "Upgrade"
-#~ msgstr "Aktualisierung"
+#~ "Sie können die Verbindung trennen oder sie neu konfigurieren."
-#~ msgid "192.168.100.0/255.255.255.0\n"
-#~ msgstr "192.168.100.0/255.255.255.0\n"
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "Sie sind momentan mit dem Internet verbunden."
-#~ msgid "192.168.100.0/24\n"
-#~ msgstr "192.168.100.0/24\n"
+#~ msgid "files sending by FTP"
+#~ msgstr "DatenĂŒagung via FTP"
-#~ msgid "10.1.*\n"
-#~ msgstr "10.1.*\n"
+#~ msgid "Use incremental backup (do not replace old backups)"
+#~ msgstr "Inkrementelles Backup (alte Backups nicht ĂŒberschreiben)"
-#~ msgid "10.0.0.*\n"
-#~ msgstr "10.0.0.*\n"
+#~ msgid "Relaunch 'lilo'"
+#~ msgstr "LILO ausfĂŒhren"
-#~ msgid "192.168.100.194\n"
-#~ msgstr "192.168.100.194\n"
+#~ msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+#~ msgstr "Erstellen der RamDisk: „mkinitrd -f /boot/initrd-%s.img %s“."
-#~ msgid "Do you want to configure another printer?"
-#~ msgstr "Möchten Sie einen weiteren Drucker einrichten?"
+#~ msgid "Write %s"
+#~ msgstr "Schreiben von %s"
-#~ msgid "Know how to use this printer"
-#~ msgstr "Wie dieser Drucker genutzt werden kann"
+#~ msgid "Copy %s to %s"
+#~ msgstr "Kopiere „%s“ nach „%s“"
-#~ msgid "Preparing Printerdrake..."
-#~ msgstr "PrinterDrake vorbereiten ..."
+#~ msgid "Backup %s to %s.old"
+#~ msgstr "Anlegen einer Sicherheitskopie von „%s“ unter „%s.old“."
-#~ msgid "Reading printer data ..."
-#~ msgstr "Lesen der Druckertreiber-Datenbank ..."
+#~ msgid "ttf fonts conversion"
+#~ msgstr "ttf-Schriftkonvertierung"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#~ msgid ""
-#~ "You must indicate where you wish to place the information required to "
-#~ "boot\n"
-#~ "GNU/Linux.\n"
-#~ "\n"
-#~ "Unless you know exactly what you are doing, choose \"First sector of "
-#~ "drive\n"
-#~ "(MBR)\"."
-#~ msgstr ""
-#~ "\"Sie mĂŒssen nun entscheiden, wo die Informationen zum Starten Ihrer\n"
-#~ "GNU/Linux Distribution erstellt werden sollen.\n"
-#~ "\n"
-#~ "Sofern Sie nicht genau wissen, was sie machen sollen, wĂ€hlen Sie „Erster\n"
-#~ "Sektor der Platte (MBR)“."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#~ msgid ""
-#~ "DrakX now needs to know if you want to perform a default (\"Recommended"
-#~ "\")\n"
-#~ "installation or if you want to have greater control (\"Expert\") over "
-#~ "your\n"
-#~ "installation. You can also choose to do a new installation or upgrade "
-#~ "your\n"
-#~ "existing Mandrake Linux system:\n"
-#~ "\n"
-#~ " * \"Install\": completely wipes out the old system. However, depending "
-#~ "on\n"
-#~ "what is currently installed on your machine, you may be able to keep "
-#~ "some\n"
-#~ "old partitions (Linux or otherwise) unchanged;\n"
-#~ "\n"
-#~ " * \"Upgrade\": this installation class allows to simply update the\n"
-#~ "packages currently installed on your Mandrake Linux system. It keeps "
-#~ "your\n"
-#~ "hard drives' current partitions as well as user configurations. All "
-#~ "other\n"
-#~ "configuration steps remain available, similar to a normal installation;\n"
-#~ "\n"
-#~ " * \"Upgrade Packages Only\": this new installation class allows you to\n"
-#~ "upgrade an existing Mandrake Linux system while keeping all system\n"
-#~ "configurations unchanged. Adding new packages to the current "
-#~ "installation\n"
-#~ "is also possible.\n"
-#~ "\n"
-#~ "Upgrades should work fine on Mandrake Linux systems using version \"8.1"
-#~ "\"\n"
-#~ "or later.\n"
-#~ "\n"
-#~ "Depending on your GNU/Linux knowledge, select one of the following "
-#~ "choices:\n"
-#~ "\n"
-#~ " * Recommended: choose this if you have never installed a GNU/Linux\n"
-#~ "operating system. The installation will be very easy and you will only "
-#~ "be\n"
-#~ "asked a few questions;\n"
-#~ "\n"
-#~ " * Expert: if you have a good GNU/Linux understanding, you may wish to\n"
-#~ "perform a highly customized installation. Some of the decisions you will\n"
-#~ "have to make may be difficult if you do not have good GNU/Linux "
-#~ "knowledge,\n"
-#~ "so it is not recommended that those without a fair amount of experience\n"
-#~ "select this installation class."
-#~ msgstr ""
-#~ "„DrakX“ fragt Sie nun nach der gewĂŒnschten Installationsart. Sie haben "
-#~ "die\n"
-#~ "Wahl zwischen einer Standardinstallation („Empfehlenswert“) und einer\n"
-#~ "Variante, in der Sie mehr Einfluss ausĂŒben können („Experte“). Sie "
-#~ "mĂŒssen\n"
-#~ "sich nun auch entscheiden, ob Sie eine Installation oder eine\n"
-#~ "Aktualisierung einer bereits vorhandenen Mandrake Linux-Version "
-#~ "vornehmen\n"
-#~ "wollen. Es ist möglich, die Installation ĂŒber ein existierendes BS zu\n"
-#~ "installieren und dieses damit zu entfernen. Sie können auch eine\n"
-#~ "Aktualisierung vornehmen, um eine existierende Installation zu "
-#~ "reparieren.\n"
-#~ "WĂ€hlen Sie:\n"
-#~ "\n"
-#~ " * „Installieren“: Entfernt komplett Ă€ltere Versionen von Mandrake "
-#~ "Linux,\n"
-#~ "die noch installiert sind - um genau zu sein können Sie je nach "
-#~ "aktuellem\n"
-#~ "Inhalt Ihrer Platte auch einige Àltere Linux- oder anderweitige "
-#~ "Partitionen\n"
-#~ "unangetastet behalten.\n"
-#~ "\n"
-#~ " * „Aktualisieren“: Mit dieser Variante können Sie eine existierende\n"
-#~ "Mandrake Linux Version aktualisieren. Die Partitionstabellen sowie die\n"
-#~ "persönlichen Verzeichnisse der Anwender bleiben erhalten. Alle anderen\n"
-#~ "Installationsschritte werden wie bei einer Installation ausgefĂŒhrt.\n"
-#~ "\n"
-#~ " * „Nur Pakete aktualisieren“: In dieser Variante werden alle Schritte "
-#~ "der\n"
-#~ "Installation, bis auf die Auswahl der zu installierenden Pakete,\n"
-#~ "ĂŒbersprungen.\n"
-#~ "\n"
-#~ "Aktualisierungen von Mandrake Linux „8.1“ oder aktuelleren Systemen "
-#~ "sollten\n"
-#~ "problemlos funktionieren.\n"
-#~ "\n"
-#~ "Je nachdem, wie viel Erfahrung Sie mit GNU/Linux haben, können Sie sich "
-#~ "fĂŒr\n"
-#~ "eine der folgenden Installations- oder Aktualisierungsarten fĂŒr Ihr\n"
-#~ "Mandrake Linux System entscheiden:\n"
-#~ "\n"
-#~ " * Empfehlenswert: Falls Sie noch nie ein GNU/Linux Betriebssystem\n"
-#~ "installiert haben. Die Installation wird sehr einfach sein und es werden\n"
-#~ "Ihnen nur sehr wenige Fragen gestellt werden.\n"
-#~ "\n"
-#~ " * Experte: Wenn Sie den Umgang mit GNU/Linux „im Schlaf“ beherrschen "
-#~ "und\n"
-#~ "hochgranulare Wahlmöglichkeiten wĂŒnschen, ist dies Ihre\n"
-#~ "Installationsmethode. Wie bei der benutzerdefinierten Installation "
-#~ "können\n"
-#~ "Sie die hauptsĂ€chliche Verwendung festlegen: „Arbeitsplatzrechner“,\n"
-#~ "„Entwicklungsplattform“ oder „Server“. Seien Sie sehr vorsichtig, wenn "
-#~ "Sie\n"
-#~ "sich fĂŒr diese Installationsklasse entscheiden. Die Antworten auf einige\n"
-#~ "Fragen können sehr schwierig sein und Auswirkungen auf Sicherheit und\n"
-#~ "StabilitÀt Ihrer Distribution haben. WÀhlen Sie diese "
-#~ "Installationsklasse\n"
-#~ "also wirklich nur wenn Sie wissen, was Sie tun!\n"
-#~ "\n"
-#~ "Dieses Handbuch wird sich auf die Installationsart „Experte“ "
-#~ "konzentrieren.\n"
-#~ "Sollten Sie sich stattdessen fĂŒr die Klasse „Empfehlenswert“ "
-#~ "entscheiden,\n"
-#~ "ĂŒberlesen Sie bitte einfach die Abschnitte, die fĂŒr Sie nicht zutreffen."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#~ msgid "Please be patient. This operation can take several minutes."
-#~ msgstr ""
-#~ "Haben Sie bitte etwas Geduld. Diese Aktion kann einige Minuten dauern."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#~ msgid ""
-#~ "Your new Mandrake Linux operating system is currently being installed.\n"
-#~ "Depending on the number of packages you will be installing and the speed "
-#~ "of\n"
-#~ "your computer, this operation could take from a few minutes to a\n"
-#~ "significant amount of time.\n"
-#~ "\n"
-#~ "Please be patient."
-#~ msgstr ""
-#~ "Ihr neues Mandrake Linux System wird nun installiert. AbhÀngig von der\n"
-#~ "Anzahl Pakete und der Geschwindigkeit Ihres Rechners kann dies zwischen\n"
-#~ "einigen Minuten und mehreren Stunden dauern.\n"
-#~ "\n"
-#~ "Haben Sie noch etwas Gerduld."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#~ msgid ""
-#~ "X (for X Window System) is the heart of the GNU/Linux graphical "
-#~ "interface\n"
-#~ "on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-#~ "WindowMaker, etc.) bundled with Mandrake Linux rely.\n"
-#~ "\n"
-#~ "You will be presented the list of available resolutions and color depth\n"
-#~ "available for your hardware. Choose the one that best suit your needs "
-#~ "(you\n"
-#~ "will be able to change that after installation though). When you are\n"
-#~ "satisfied with the sample shown in the monitor, click \"OK\". A window "
-#~ "will\n"
-#~ "then appear and ask you if you can see it.\n"
-#~ "\n"
-#~ "If you are doing an \"Expert\" installation, you will enter the X\n"
-#~ "configuration wizard. See the corresponding section of the manual for "
-#~ "more\n"
-#~ "information about this wizard.\n"
-#~ "\n"
-#~ "If you can see the message during the test, and answer \"Yes\", then "
-#~ "DrakX\n"
-#~ "will proceed to the next step. If you cannot see the message, it simply\n"
-#~ "means that the configuration was wrong and the test will automatically "
-#~ "end\n"
-#~ "after 10 seconds, restoring the screen. Refer then to the video\n"
-#~ "configuration section of the user guide for more information on how to\n"
-#~ "configure your display."
-#~ msgstr ""
-#~ "X (das X Window System) ist das Herz der grafischen BenutzeroberflÀche "
-#~ "von\n"
-#~ "GNU/Linux. Es bildet die Grundlage fĂŒr die Vielzahl grafischer\n"
-#~ "Benutzerumgebungen, die Mandrake Linux Ihnen anbietet (wie etwa KDE, "
-#~ "GNOME,\n"
-#~ "AfterStep oder WindowMaker). Auch hier wird „DrakX“ die Konfiguration\n"
-#~ "soweit wie möglich selbststÀndig vollziehen.\n"
-#~ "\n"
-#~ "Sollten Sie nicht gerade sehr alte, sehr neue oder exotische "
-#~ "Grafikhardware\n"
-#~ "einsetzen, wird „DrakX“ die Konfiguration erfolgreich durchfĂŒhren und\n"
-#~ "anschließend die grafische OberflĂ€che mit der bestmöglichen Auflösung\n"
-#~ "starten! Es erscheint ein Testfenster und Sie werden anschließend "
-#~ "gefragt,\n"
-#~ "ob die Anzeige einwandfrei war.\n"
-#~ "\n"
-#~ "Falls Sie eine „Experte“n-Installation vornehmen, werden Sie in den\n"
-#~ "folgenden Schritten von dem „DrakX“-Konfigurationsassistenten begleitet.\n"
-#~ "\n"
-#~ "Falls das Bild korrekt dargestellt wird, wÀhlen Sie bitte die "
-#~ "SchaltflÀche\n"
-#~ "„Ja“ an, „DrakX“ wird dann mit dem nĂ€chsten Schritt der Installation\n"
-#~ "fortfahren. Sollte der Schirm aus irgendwelchen GrĂŒnden nicht lesbar "
-#~ "sein,\n"
-#~ "mĂŒssen Sie nur 10 Sekunden warten. Anschließend sollte wieder das\n"
-#~ "KonfigurationsmenĂŒ erscheinen."
-
-#~ msgid "Switching between ALSA and OSS help"
-#~ msgstr "Hilfe zum Wechsel zwischen ALSA und OSS"
-
-#~ msgid "Detecting devices ..."
-#~ msgstr "GerÀteerkennung..."
-
-#~ msgid "Test ports"
-#~ msgstr "Test der AnschlĂŒsse"
+#~ msgid "Fonts conversion"
+#~ msgstr "Konvertieren der Schriften"
diff --git a/perl-install/share/po/el.po b/perl-install/share/po/el.po
index edcb98ebb..8fab6ea14 100644
--- a/perl-install/share/po/el.po
+++ b/perl-install/share/po/el.po
@@ -7,7 +7,7 @@
msgid ""
msgstr ""
"Project-Id-Version: DrakX-el\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
"PO-Revision-Date: 2003-06-14 23:44+0300\n"
"Last-Translator: Íßêïò Íęêôáńçò (Nick Niktaris) <niktarin@yahoo.com>\n"
"Language-Team: Greek <nls@tux.hellug.gr>\n"
@@ -16,1938 +16,1130 @@ msgstr ""
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.0.1\n"
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
-msgstr ""
-"Ôï êïéíüśńçóôï áíÜ śńȚóôç êÜíćé śńȚóç ôçò ïìÜäáò \"fileshare\". \n"
-"Ìđïńćßôć íá ôçí đńïóèĘóćôć óôïí êÜèć śńȚóôç óć áőôȚ ôçí ïìÜäá ìć ôï "
-"userdrake."
-
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Cancel"
-msgstr "¶êőńï"
+msgid "Scanning partitions to find mount points"
+msgstr "ÁíÜëőóç êáôáôìȚóćùí ăéá đńïóäéïńéóìü óçìćßùí óęíäćóçò."
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Launch userdrake"
-msgstr "Ćêêßíçóç userdrake"
+msgid "if set to yes, check additions/removals of suid root files."
+msgstr "áí ïńéóôćß íáé, Ęëćăśïò ăéá đńïèĘóćéò/áöáéńĘóćéò áńśćßùí suid root."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"ÈĘëćôć íá ćđéôńĘűćôć óôïőò śńȚóôćò íá Ęśïőí êïéíüśńçóôïőò êáôáëüăïőò;\n"
-"Áí íáé ôüôć ïé śńȚóôćò èá ìđïńïęí áđëÜ íá êÜíïőí êëéê óôï \"Êïéíüśńçóôï\" "
-"óôïí konqueror êáé ôï nautilus.\n"
-"\n"
-"Ôï \"ĐńïóáńìïóìĘíï\" ćđéôńĘđćé ôçí áíÜ śńȚóôç ńęèìéóç.\n"
+msgid "\t\tErase=%s"
+msgstr "\t\tÓâȚóéìï=%s"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "žíá áđáńáßôçôï áńśćßï (ôï %s ) äćí őđÜńśćé"
+msgid "network printer port"
+msgstr "èęńá ćêôőđùôȚ äéêôęïő"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
-msgstr ""
-"Ìđïńćßôć íá ăßíćé ćîáăùăȚ ìć ôçí śńȚóç NFS Ț Samba. Đáńáêáëț ćđéëĘîôć đïßï "
-"èĘëćôć."
+msgid "Please insert floppy disk:"
+msgstr "Đáńáêáëț ćéóÜăćôć äéóêĘôá Ćêêßíçóçò:"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Ôï đáêĘôï %s đńĘđćé íá áíáâáèìéóôćß. ÈĘëćôć íá ôï ćăêáôáóôȚóćôć;"
+msgid "PCMCIA"
+msgstr "PCMCIA"
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Custom"
-msgstr "ĐńïóáńìïóìĘíï"
+msgid ""
+"The backup partition table has not the same size\n"
+"Still continue?"
+msgstr ""
+"Ï ćöćäńéêüò đßíáêáò êáôáôìȚóćùí Ęśćé äéáöïńćôéêü ìĘăćèïò\n"
+"Íá óőíćśßóù;"
-#: ../../any.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Allow all users"
-msgstr "ĆđéôńĘđćôáé ăéá üëïőò ôïőò śńȚóôćò"
+msgid "Which username"
+msgstr "Đïßï üíïìá śńȚóôç"
#: ../../any.pm:1
#, c-format
-msgid "No sharing"
-msgstr "Śùńßò êïéíȚ śńȚóç"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "More"
-msgstr "¶ëëá"
+msgid "Which type of entry do you want to add?"
+msgstr "Ôé ôęđïő ćđéëïăȚ èĘëćôć íá đńïóèĘóćôć;"
-#: ../../any.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Here is the full list of available countries"
-msgstr "ÁőôȚ ćßíáé ç đëȚńçò ëßóôá ôùí äéáèĘóéìùí śùńțí"
+msgid "Restore partition table"
+msgstr "ĆđáíáöïńÜ đßíáêá êáôáôìȚóćùí"
-#: ../../any.pm:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Please choose your country."
-msgstr "Đáńáêáëț ćđéëĘîôć ôçí śțńá óáò."
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid " / Region"
-msgstr "Ńćïőíéüí"
+msgid "On CUPS server \"%s\""
+msgstr "Óôïí ćîőđçńćôçôȚ CUPS \"%s\""
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Country"
-msgstr "Śțńá"
+msgid "Post-install configuration"
+msgstr "Ńőèìßóćéò ìćôÜ ôçí ćăêáôÜóôáóç"
-#: ../../any.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "All languages"
-msgstr "Œëćò ïé ăëțóóćò"
+msgid "Use ``%s'' instead"
+msgstr "ŚńçóéìïđïéȚóôć ``%s'' óôç èĘóç ôïő"
-#: ../../any.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Use Unicode by default"
-msgstr "ĐńïćđéëćăìĘíç ç śńȚóç Unicode"
+msgid "Type"
+msgstr "Ôęđïò"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
+"\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
msgstr ""
-"Ôï Mandrake Linux őđïóôçńßæćé đïëëáđëĘò ăëțóóćò.ĆđéëĘîôć \n"
-"ôéò Üëëćò ăëțóóćò đïő èá ćßíáé äéáèĘóéìćò ìćôÜ ôï đĘńáò ôçò \n"
-"ćăêáôÜóôáóçò êáé ôçí ćđáíćêêßíçóç ôïő óőóôȚìáôüò óáò."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Please choose a language to use."
-msgstr "Đáńáêáëț ćđéëĘîôć ôç ăëțóóá."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Choose the window manager to run:"
-msgstr "ĆđéëĘîôć ôïí äéáśćéńéóôȚ đáńáèęńùí đïő èĘëćôć íá śńçóéìïđïéȚóćôć:"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Choose the default user:"
-msgstr "ĆđéëĘîôć ôïí đńïćđéëćăìĘíï śńȚóôç:"
+"\n"
+"Ćđßóçò ćêôőđùôĘò đïő Ęśïőí ńőèìéóôćß ìć áńśćßá PPD đïő đáńĘśïíôáé áđü ôïőò "
+"êáôáóêćőáóôĘò ôïőò Ț ìć ôïđéêïęò ïäçăïęò CUPS äćí ìđïńïęí íá ìćôáöćńèïęí."
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to use this feature?"
-msgstr "ÈĘëćôć íá śńçóéìïđïéȚóćôć áőôȚ ôç ëćéôïőńăßá;"
+msgid "Sri Lanka"
+msgstr "Óńé ËÜíêá"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "I can set up your computer to automatically log on one user."
+msgid ""
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
-"Ìđïńț íá ńőèìßóù ôï óęóôçìÜ óáò Ęôóé țóôć íá óőíäĘćé áőôüìáôá Ęíáí śńȚóôç."
+"Ï đáńáêÜôù ćêôőđùôȚò\n"
+"\n"
+"%s%s\n"
+"ćßíáé Üìćóá óőíäćìĘíïé óôï óęóôçìÜ óáò"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Autologin"
-msgstr "Áőôüìáôç óęíäćóç"
+msgid "Central African Republic"
+msgstr "Äçìïêńáôßá ÊćíôńéêȚò ÁöńéêȚò"
-#: ../../any.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Icon"
-msgstr "Ćéêïíßäéï"
+msgid "Gateway device"
+msgstr "ÓőóêćőȚ đęëçò"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Shell"
-msgstr "Öëïéüò (shell)"
+msgid "Net Method:"
+msgstr "ÌĘèïäïò äéêôęïő:"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Password (again)"
-msgstr "Êùäéêüò Đńüóâáóçò (îáíÜ)"
+msgid "Ethernetcard"
+msgstr "ÊÜńôá Äéêôęïő Ethernet"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
#: ../../standalone/drakconnect:1
#, c-format
-msgid "Password"
-msgstr "Êùäéêüò Đńüóâáóçò"
+msgid "Parameters"
+msgstr "ĐáńÜìćôńïé"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "User name"
-msgstr "Œíïìá śńȚóôç"
+msgid "Auto-detect"
+msgstr "Áőôüìáôç áíßśíćőóç"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Real name"
-msgstr "Đńáăìáôéêü üíïìá"
+msgid "Interface:"
+msgstr "ÄéćđáöȚ:"
-#: ../../any.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Accept user"
-msgstr "ÁđïäïśȚ śńȚóôç"
+msgid "Select installation class"
+msgstr "ĆđéëĘîôć ćăêáôÜóôáóç"
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Done"
-msgstr "Ïëïêëçńțèçêć"
+msgid "on CDROM"
+msgstr "óôï CDROM"
-#: ../../any.pm:1
+#: ../../network/tools.pm:1
#, c-format
msgid ""
-"Enter a user\n"
-"%s"
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
msgstr ""
-"ĆéóÜăćôć śńȚóôç\n"
-"%s"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Add user"
-msgstr "ĐńïóèȚêç śńȚóôç"
-
-#: ../../any.pm:1
-#, c-format
-msgid "This user name has already been added"
-msgstr "Áőôü ôï üíïìá śńȚóôç őđÜńśćé Țäç"
-
-#: ../../any.pm:1
-#, c-format
-msgid "The user name is too long"
-msgstr "Áőôü ôï üíïìá śńȚóôç ćßíáé đïëę ìáêńę"
+"Ôï óęóôçìá öáßíćôáé íá ìçí ćßíáé óőíäćìĘíï óôï Äéáäßêôőï\n"
+"ĐńïóđáèȚóôć íá îáíáńőèìßóćôć ôç óęíäćóȚ óáò."
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Ôï êùäéêü üíïìá ìđïńćß íá đćńéĘśćé ìüíï đćæÜ ăńÜììáôá, áńéèìïęò, `-' êáé `_'"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Please give a user name"
-msgstr "Đáńáêáëț ćéóÜăćôć üíïìá śńȚóôç"
-
-#: ../../any.pm:1
-#, c-format
-msgid "This password is too simple"
-msgstr "Ï êùäéêüò đńüóâáóçò ćßíáé đïëę áđëüò"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Please try again"
-msgstr "Đáńáêáëț đńïóđáèȚóôć îáíÜ"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "The passwords do not match"
-msgstr "Ïé êùäéêïß đńüóâáóçò ćßíáé áíüìïéïé"
-
-#: ../../any.pm:1
-#, c-format
-msgid "(already added %s)"
-msgstr "(ôï %s Ęśćé Țäç đńïóôćèćß)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to compilation tools"
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
msgstr ""
+"ÓőíäĘóôć ôïí ćêôőđùôȚ óáò óć Ęíáí ćîőđçńćôçôȚ Linux êáé óőíäĘóôć óć áőôüí ôá "
+"ìçśáíȚìáôá Windows óáí đćëÜôćò\n"
+"\n"
+"ÈĘëćôć đńáăìáôéêÜ íá óőíćśßóćôć ôéò ńőèìßóćéò ôïő ćêôőđùôȚ óáò đïő êÜíćôć;"
-#: ../../any.pm:1
-#, c-format
-msgid "access to network tools"
-msgstr "đńüóâáóç óć ćńăáëćßá äéêôęïő"
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to administrative files"
-msgstr "đńüóâáóç óć äéáśćéńéóôéêÜ áńśćßá"
-
-#: ../../any.pm:1
-#, c-format
-msgid "allow \"su\""
-msgstr "äőíáôüôçôá \"su\""
-
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to rpm tools"
-msgstr "đńüóâáóç óć ćńăáëćßá rpm"
+msgid "Belarus"
+msgstr "Ëćőêïńùóßá"
-#: ../../any.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "access to X programs"
-msgstr "đńüóâáóç óć đńïăńÜììáôá Ś"
+msgid "Error writing to file %s"
+msgstr "ÓöÜëìá ćăăńáöȚò óôï áńśćßï %s"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
msgstr ""
-"ŐđÜńśïőí ïé áêüëïőèćò ćđéëïăĘò.\n"
-"Ìđïńćßôć íá đńïóèĘóćôć êé Üëëćò Ț íá áëëÜîćôć ôéò őđÜńśïőóćò."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Other OS (windows...)"
-msgstr "¶ëëï ëćéôïőńăéêü (windows...)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "¶ëëï ëćéôïőńăéêü (MacOS...)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "¶ëëï ëćéôïőńăéêü (SunOS...)"
-
-#: ../../any.pm:1 ../../standalone/drakbackup:1
-#, c-format
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Ôé ôęđïő ćđéëïăȚ èĘëćôć íá đńïóèĘóćôć;"
-
-#: ../../any.pm:1
-#, c-format
-msgid "This label is already used"
-msgstr "ÁőôȚ ç ćôéêĘôá śńçóéìïđïéćßôáé Țäç"
-
-#: ../../any.pm:1
-#, c-format
-msgid "You must specify a root partition"
-msgstr "ĐńĘđćé íá ïńßóćôć ìéá êáôÜôìçóç root"
-
-#: ../../any.pm:1
-#, c-format
-msgid "You must specify a kernel image"
-msgstr "ĐńĘđćé íá ïńßóćôć ìéá ćéêüíá đőńȚíá"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Empty label not allowed"
-msgstr "Äćí ćđéôńĘđćôáé Üäćéá ćôéêĘôá"
-
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Default"
-msgstr "ĐńïćđéëćăìĘíï"
-
-#: ../../any.pm:1
-#, c-format
-msgid "NoVideo"
-msgstr "ŚùńßòVideo"
+"Ôï apmd đáńáêïëïőèćß êáé êáôáăńÜöćé ôçí êáôÜóôáóç ôçò ìđáôáńßáò.\n"
+"Ìđïńćß ćđßóçò íá śńçóéìïđïéçèćß ăéá ôï áőôüìáôï êëćßóéìï ôïő óőóôȚìáôïò óć \n"
+"đćńßđôùóç śáìçëȚò öüńôéóçò ôçò ìđáôáńßáò."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Initrd-size"
-msgstr "ìĘăćèïò Initrd"
+msgid "Use tape to backup"
+msgstr "ŚńȚóç ôáéíßáò ăéá ôá áńśćßá áóöáëćßáò"
-#: ../../any.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Append"
-msgstr "ĐńïóÜńôçóç"
+msgid "The following packages are going to be installed"
+msgstr "Èá ćăêáôáóôáèïęí ôá đáńáêÜôù đáêĘôá"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Label"
-msgstr "ĆôéêĘôá"
+msgid "CUPS configuration"
+msgstr "Ńęèìéóç CUPS"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unsafe"
-msgstr "ÁíáóöáëĘò"
+msgid "Hong Kong"
+msgstr "Śïíăê Êïíăê"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Table"
-msgstr "Đßíáêáò"
+msgid "Not enough free space to allocate new partitions"
+msgstr "Äćí őđÜńśćé áńêćôüò ćëćęèćńïò śțńïò ăéá äçìéïőńăßá íĘùí êáôáôìȚóćùí"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Root"
-msgstr "Root"
+msgid "Moving"
+msgstr "Ìćôáêßíçóç óć ćîĘëéîç"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Read-write"
-msgstr "Read-write"
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
+msgstr ""
+"\n"
+"Äńáóôçńéüôçôćò Drakbackup ìĘóù %s:\n"
+"\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid "("
+msgstr "("
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Video mode"
-msgstr "ÁíÜëőóç ïèüíçò"
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgstr ""
+"Êáëțò Țëèáôć óôïí Ïäçăü Ńęèìéóçò Äéêôęïő\n"
+"\n"
+"Ćßìáóôć Ęôïéìïé íá ńőèìßóïőìć ôç óęíäćóȚ óáò óôï äéáäßêôőï/äßêôőï.\n"
+"Áí äćí èĘëćôć íá śńçóéìïđïéȚóćôć ôçí áőôüìáôç áíßśíćőóç, áđïćđéëĘîôć ôï "
+"êïőôÜêé.\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "Image"
-msgstr "Ćéêüíá"
+msgid ")"
+msgstr ")"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Default OS?"
-msgstr "Ćî ïńéóìïę ëćéôïőńăéêü;"
+msgid "Lebanon"
+msgstr "Ëßâáíïò"
-#: ../../any.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Enable OF Boot?"
-msgstr "Ćíćńăïđïßçóç OF ćêêßíçóçò;"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Enable CD Boot?"
-msgstr "Ćíćńăïđïßçóç ćêêßíçóçò áđü CD;"
+msgid "Stop"
+msgstr "Ôćńìáôéóìüò"
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "ÔĘëïò Śńüíïő Ćêêßíçóçò ĐőńȚíá"
+msgid "Edit selected host"
+msgstr "Ćđćîćńăáóßá ćđéëćăìĘíïő őđïëïăéóôȚ"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Open Firmware Delay"
-msgstr "¶íïéăìá ÊáèőóôĘńçóçò Firmware"
+msgid "No CD device defined!"
+msgstr "Äćí êáèïńßóôçêć óőóêćőȚ CD"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Boot device"
-msgstr "ÓőóêćőȚ ćêêßíçóçò"
+msgid "Bulgarian (phonetic)"
+msgstr "Âïőëăáńéêü (öùíçôéêü)"
-#: ../../any.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Init Message"
-msgstr "ÌȚíőìá Init"
+msgid "The DHCP start ip"
+msgstr "Ç IP ćêêßíçóçò ôïő DHCP"
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Bootloader to use"
-msgstr "ŚńȚóç đńïăńÜììáôïò ćêêßíçóçò"
+msgid "256 kB"
+msgstr "256 kB"
#: ../../any.pm:1
#, c-format
msgid "Bootloader main options"
msgstr "ÂáóéêĘò ćđéëïăĘò đńïăńÜììáôïò ćêêßíçóçò"
-#: ../../any.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
msgstr ""
-"Ç ćđéëïăȚ ``Áđáăüńćőóç ćđéëïățí ăńáììȚò ćíôïëȚò'' ćßíáé Üśńçóôç śùńßò êùäéêü "
-"đńüóâáóçò"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Give the ram size in MB"
-msgstr "ĆéóÜăćôć ìĘăćèïò ìíȚìçò óć MB"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Enable multiple profiles"
-msgstr "Ćíćńăïđïßçóç đïëëáđëțí đńïößë"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "ÁêńéâȚò đïóüôçôáò ìíȚìçò áí śńćéÜæćôáé (ćíôïđßóôçêáí %d MB)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Êáèáńéóìüò /tmp óć êÜèć ćêêßíçóç"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Create a bootdisk"
-msgstr "ÄéóêĘôá ćêêßíçóçò"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "restrict"
-msgstr "áđáăüńćőóç"
+msgid "Tape"
+msgstr "Ôáéíßá"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Restrict command line options"
-msgstr "Áđáăüńćőóç ćđéëïățí ăńáììȚò ćíôïëȚò"
+msgid "Scanning network..."
+msgstr "ÁíáæȚôçóç óôï äßêôőï..."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Force No APIC"
+msgid ""
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
msgstr ""
+"Ìć áőôȚ ôçí ćđéëïăȚ èá ìđïńćßôć íá ćđáíáöĘńćôć ïđïéáäȚđïôć\n"
+"Ęêäïóç ôïő êáôáëüăïő /etc."
-#: ../../any.pm:1
-#, c-format
-msgid "Enable ACPI"
-msgstr "Ćíćńăïđïßçóç ACPI"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Delay before booting default image"
-msgstr "ÊáèőóôĘńçóç đńéí ôçí ćêêßíçóç"
-
-#: ../../any.pm:1
-#, c-format
-msgid "compact"
-msgstr "óőìđáăȚò"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Compact"
-msgstr "ÓőìđáăȚò"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Bootloader installation"
-msgstr "Đńüăńáììá ćêêßíçóçò"
-
-#: ../../any.pm:1
-#, c-format
-msgid "First sector of boot partition"
-msgstr "Đńțôïò ôïìĘáò ôçò êáôÜôìçóçò ćêêßíçóçò"
-
-#: ../../any.pm:1
-#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Đńțôïò ôïìĘáò ôïő äßóêïő (MBR)"
-
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Đïę èĘëćôć íá ćăêáôáóôȚóćôć ôï đńüăńáììá ćêêßíçóçò;"
+msgid "Malaysia"
+msgstr "Ìáëáéóßá"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "LILO/grub Installation"
-msgstr "ĆăêáôÜóôáóç LILO/grub"
+msgid "Swiss (French layout)"
+msgstr "Ćëâćôéêü (ĂáëëéêȚ äéÜôáîç)"
-#: ../../any.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "SILO Installation"
-msgstr "ĆăêáôÜóôáóç SILO"
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "áđïôőśßá mkraid (ìȚđùò áđïőóéÜæïőí ôá raidtools;)"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Skip"
-msgstr "ĐáńÜëćéűç"
+msgid "Webcam"
+msgstr ""
-#: ../../any.pm:1
-#, c-format
-msgid "On Floppy"
-msgstr "Óôçí ÄéóêĘôá"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "size of the (second level) cpu cache"
+msgstr "ÌĘăćèïò ôçò (äćőôĘńïő ćđéđĘäïő) cpu cache"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "First sector of the root partition"
-msgstr "Đńțôïò ôïìĘáò ôçò êáôÜôìçóçò ćêêßíçóçò"
+msgid "Soundcard"
+msgstr "ÊÜńôá Țśïő"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
msgstr ""
-"ĆđéëĘîáôć íá ćăêáôáóôȚóćôć ôï đńüăńáììá ćêêßíçóçò óć ìéá êáôÜôìçóç.\n"
-"Ćííïćßôć üôé Ęśćôć Țäç ćăêáôÜóôáóç Ęíá Üëëï đńüăńáììá ćêêßíçóçò óôïí óêëçńü "
-"óáò äßóêï (đ.ś. System Commander).\n"
-"\n"
-"Áđü đïéüí äßóêï îćêéíÜôć;"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Creating bootdisk..."
-msgstr "Äçìéïőńăßá äßóêïő ćêêßíçóçò..."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "ĆéóÜăćôć äéóêĘôá óôïí ïäçăü %s"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "ĆđéëĘîôć ïäçăü äéóêĘôáò ăéá äçìéïőńăßá äéóêĘôáò ćêêßíçóçò"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Second floppy drive"
-msgstr "Äćęôćńïò ïäçăüò äéóêĘôáò"
-
-#: ../../any.pm:1
-#, c-format
-msgid "First floppy drive"
-msgstr "Đńțôïò ïäçăüò äéóêĘôáò"
+"Ăéá íá ćêôőđțóćôć áđü ôç ăńáììȚ ćíôïëțí (đáńÜèőńï ôćńìáôéêïę) êÜíôć śńȚóç "
+"ôçò ćíôïëȚò \"%s <áńśćßï>\".\n"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "ËőđÜìáé, äćí őđÜńśćé äéáèĘóéìïò ïäçăüò äéóêĘôáò"
+msgid "Level %s\n"
+msgstr "Ćđßđćäï %s\n"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Ìéá đńïóáńìïóìĘíç äéóêĘôá ćêêßíçóçò óáò äßíćé ôçí äőíáôüôçôá íá ćêêéíȚóćôć\n"
-"ôï óęóôçìÜ óáò śùńßò ôçí śńȚóç ôïő đńïăńÜììáôïò ćêêßíçóçò. Áőôü ćßíáé "
-"śńȚóéìï ćÜí äćí èĘëćôć\n"
-"íá ćăêáôáóôȚóćôć ôï LILO (Ț ôï grub), ćÜí êÜđïéï Üëëï ëćéôïőńăéêü "
-"êáôáóôńĘűćé ôï LILO\n"
-"Ț ćÜí ïé ńőèìßóćéò óáò äćí ćđéôńĘđïőí ôç śńȚóç LILO. ÁőôȚ ç äéóêĘôá ìđïńćß\n"
-"ćđßóçò íá śńçóéìïđïéçèćß óć óőíäőáóìü ìć ôçí äéóêĘôá äéÜóùóçò ôïő Mandrake,\n"
-"êÜíïíôáò ćőêïëüôćńç ôçí ćđáíáöïńÜ ôïő óőóôȚìáôïò ìćôÜ áđü óïâáńȚ âëÜâç.\n"
-"ÈĘëćôć íá äçìéïőńăȚóćôć äéóêĘôá ćêêßíçóçò;\n"
-"%s"
+msgid "Luxembourg"
+msgstr "Ëïőîćìâïęńăï"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
+" DrakBackup Daemon Report\n"
"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
"\n"
+msgstr ""
"\n"
-"(ĐńïóïśȚ!:ÊÜíćôć śńȚóç ôïő XFS óôçí êáôÜôìçóç root\n"
-"ç äçìéïőńăßá äéóêĘôá ćêêßíçóçò ìćăĘèïőò 1.44 Mb ìÜëëïí èá áđïôęśćé,\n"
-"ćđćéäȚ ôï XFS śńćéÜæćôáé đïëę ìćăÜëïőò ïäçăïęò.)"
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
+" Äáßìïíáò áíáöïńÜò DrakBackup \n"
"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Ìéá đńïóáńìïóìĘíç äéóêĘôá ćêêßíçóçò óáò äßíćé ôçí äőíáôüôçôá íá ćêêéíȚóćôć\n"
-"ôï óęóôçìÜ óáò śùńßò ôçí śńȚóç ôïő đńïăńÜììáôïò ćêêßíçóçò. Áőôü ćßíáé "
-"śńȚóéìï ćÜí äćí èĘëćôć\n"
-"íá ćăêáôáóôȚóćôć ôï SILO , Ț ćÜí êÜđïéï Üëëï ëćéôïőńăéêü êáôáóôńĘűćé ôï "
-"SILOȚ ćÜí ïé \n"
-"ńőèìßóćéò óáò äćí ćđéôńĘđïőí ôç śńȚóç SILO. ÁőôȚ ç äéóêĘôá ìđïńćß ćđßóçò íá "
-"śńçóéìïđïéçèćß óć\n"
-" óőíäőáóìü ìć ôçí äéóêĘôá äéÜóùóçò ôïő Mandrake, êÜíïíôáò ćőêïëüôćńç ôçí "
-"ćđáíáöïńÜ ôïő óőóôȚìáôïò ìćôÜ áđü óïâáńȚ âëÜâç.\n"
"\n"
-"Áí èĘëćôć íá äçìéïőńăȚóćôć ìéá ôĘôïéá äéóêĘôá ćéóÜăćôć ìéá êćíȚ äéóêĘôá óôïí "
-"ïäçăü\n"
-"äéóêĘôáò êáé đáôȚóôć \"ĆíôÜîćé\"."
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Äćí ìđïńćßôć íá ćăêáôáóôȚóćôć ôï đńüăńáììá ćêêßíçóçò óć êáôÜôìçóç %s\n"
+msgid "Iran"
+msgstr "ÉńÜí"
-#: ../../bootloader.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "not enough room in /boot"
-msgstr "äćí őđÜńśćé áńêćôüò śțńïò óôï /boot"
+msgid "Bus"
+msgstr "Bus"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "The highlighted entry will be booted automatically in %d seconds."
+msgid "Iraq"
+msgstr "ÉńÜê"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "commands before booting, or 'c' for a command-line."
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr "ĐéèáíȚ äéđëȚò äéćęèőíóçò LAN óôçí ôńĘśïőóá ńęèìéóç ôïő %s!\n"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Press enter to boot the selected OS, 'e' to edit the"
+msgid "Configuring..."
+msgstr "Ńęèìéóç..."
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use the %c and %c keys for selecting which entry is highlighted."
+msgid "The setup has already been done, and it's currently enabled."
+msgstr "Ç ńęèìéóç Ęśćé Țäç ăßíćé, êáé áőôȚ ôç óôéăìȚ ćßíáé ćíćńăïđïéçìĘíç."
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welcome to GRUB the operating system chooser!"
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid ""
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
+msgstr ""
+"Linux\n"
+" ìćôÜ âßáò."
-#: ../../bootloader.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Password (again)"
+msgstr "Êùäéêüò Đńüóâáóçò (îáíÜ)"
-#: ../../bootloader.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Grub"
-msgstr "Grub"
+msgid "Search installed fonts"
+msgstr "ÁíáæȚôçóç ćăêáôćóôçìĘíùí ăńáììáôïóćéńțí"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with text menu"
-msgstr "LILO ìć ìćíïę êćéìĘíïő"
+msgid "Venezuela"
+msgstr "ÂćíćæïőĘëá"
-#: ../../bootloader.pm:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO ìć ăńáöéêü ìćíïę"
+msgid "IP address"
+msgstr "Äéćęèőíóç IP"
-#: ../../bootloader.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Choose the sizes"
+msgstr "ĆđéëĘîôć ôá ìćăĘèç"
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"List of data corrupted:\n"
"\n"
msgstr ""
-"KALOS HRTHATE STON EPILOGEA LEITOURGIKOU SYSTHMATOS %s!\n"
-"\n"
-"EPILEXTE LEITORGIKO SYSTHMA APO TON PARAPANO KATALOGO \n"
-"H PERIMENETE %d DEUTEROLEPTA GIA THN AYTOMATH EPILOGH.\n"
+"Ëßóôá ôùí êáôćóôńáììĘíùí äćäïìĘíùí:\n"
"\n"
-#: ../../common.pm:1
-#, c-format
-msgid "consolehelper missing"
-msgstr "ôï consolehelper ëćßđćé"
-
-#: ../../common.pm:1
-#, c-format
-msgid "kdesu missing"
-msgstr "ôï kdesu ëćßđćé"
-
-#: ../../common.pm:1
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Ôá óôéăìéüôőđá èá ćßíáé äéáèĘóéìá ìćôÜ ôçí ćăêáôÜóôáóçò óôï %s"
-
-#: ../../common.pm:1
-#, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "Áäęíáôç ç ëȚűç óôéăìéïôęđùí đńéí áđü ôçí äçìéïőńăßá êáôáôìȚóćùí"
-
-#: ../../common.pm:1
-#, c-format
-msgid "%d seconds"
-msgstr "%d äćőôćńüëćđôá"
-
-#: ../../common.pm:1
-#, c-format
-msgid "1 minute"
-msgstr "1 ëćđôü"
-
-#: ../../common.pm:1
-#, c-format
-msgid "%d minutes"
-msgstr "%d ëćđôÜ"
-
-#: ../../common.pm:1
-#, c-format
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm:1
-#, c-format
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm:1
-#, c-format
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm:1
-#, c-format
-msgid "KB"
-msgstr "KB"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "United States"
-msgstr "Ç.Đ.Á."
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Austria"
-msgstr "Áőóôńßá"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "Italy"
-msgstr "Éôáëßá"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "Netherlands"
-msgstr "Ïëëáíäßá"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Sweden"
-msgstr "Óïőçäßá"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Norway"
-msgstr "Íïńâçăßá"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Greece"
-msgstr "ĆëëÜäá"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Germany"
-msgstr "Ăćńìáíßá"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Czech Republic"
-msgstr "ÔóĘśéêç Äçìïêńáôßá"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "Belgium"
-msgstr "ÂĘëăéï"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "France"
-msgstr "Ăáëëßá"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Costa Rica"
-msgstr "Êüóôá Ńßêá"
-
-#: ../../fsedit.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "ÓöÜëìá êáôÜ ôï Üíïéăìá ôïő %s ăéá ćăăńáöȚ: %s"
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
+msgstr ""
+"Ôï ìüíôćì óáò äćí őđïóôçńßæćôáé áđü ôï óęóôçìá.\n"
+"Ńßîôć ìéá ìáôéÜ óôï http://www.linmodems.org"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Nothing to do"
-msgstr "Êáìßá ćíĘńăćéá đńïò ćêôĘëćóç"
+msgid "Choose another partition"
+msgstr "ĆđéëĘîôć Üëëç êáôÜôìçóç"
-#: ../../fsedit.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr ""
-"Äćí őđÜńśćé áńêćôüò ćëćęèćńïò śțńïò ăéá ôçí áőôüìáôç äçìéïőńăßá íĘùí "
-"êáôáôìȚóćùí"
+msgid "Current user"
+msgstr "ÔńĘśïí śńȚóôç"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-"Äćí ìđïńćßôć íá śńçóéìïđïéȚóćôć êńőđôïăńáöçìĘíï óęóôçìá áńśćßùí ăéá "
-"đńïóÜńôçóç %s"
+msgid "Username"
+msgstr "Œíïìá śńȚóôç"
-#: ../../fsedit.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-"ŚńćéÜæćóôć Ęíá đńáăìáôéêü óęóôçìá áńśćßùí (ext2/ext3, reiserfs, xfs, or jfs) "
-"ăéá áőôü ôï óçìćßï óęíäćóçò\n"
+msgid "Left \"Windows\" key"
+msgstr "Áńéóôćńü đëȚêôńï \"Windows\""
-#: ../../fsedit.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr ""
-"Áőôüò ï êáôÜëïăïò đńĘđćé íá đáńáìćßíćé óôï ńéæéêü óęóôçìá áńśćßùí (root)"
+msgid "dhcpd Server Configuration"
+msgstr "Ńőèìßóćéò ĆîőđçńćôçôȚ dhcpd"
-#: ../../fsedit.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Äćí ìđïńćßôć íá śńçóéìïđïéȚóćôć ìéá êáôÜôìçóç LVM ăéá đńïóÜńôçóç %s"
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
msgstr ""
-"\n"
-" Œśé\n"
-#: ../../fsedit.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "ŐđÜńśćé Țäç êáôÜôìçóç ìć óçìćßï óęíäćóçò %s\n"
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr ""
-"Ôï üíïìá ôïő ćêôőđùôȚ đńĘđćé íá đćńéĘśćé ìüíï ăńÜììáôá, áńéèìïęò êáé ôïí "
-"śáńáêôȚńá underscore"
+msgid "Guyana"
+msgstr "ĂïőéÜíá"
-#: ../../fsedit.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Ôï óçìćßï óęíäćóçò đńĘđćé íá îćêéíÜćé ìć /"
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr "óôïí ćîőđçńćôçôȚ Novell \"%s\", óôïí ćêôőđùôȚ \"%s\""
-#: ../../fsedit.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-"Äćí ìđïńćßôć íá śńçóéìïđïéȚóćôć ôï ReiserFS ăéá êáôáôìȚóćéò ìéêńüôćńćò áđü "
-"32MB"
+msgid "Remove a module"
+msgstr "ÁđïìÜêńőíóç áńèńțìáôïò"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr ""
-"Äćí ìđïńćßôć íá śńçóéìïđïéȚóćôć ôï JFS ăéá êáôáôìȚóćéò ìéêńüôćńćò áđü 16MB"
+msgid "Password"
+msgstr "Êùäéêüò Đńüóâáóçò"
-#: ../../fsedit.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"I can't read the partition table of device %s, it's too corrupted for me :(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
+"Arguments: (max, inactive=-1)\n"
"\n"
-"Do you agree to loose all the partitions?\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
msgstr ""
-"Äćí ìđïńț íá äéáâÜóù ôïí đßíáêá êáôáôìȚóćùí ôçò óőóêćőȚò %s,, ćßíáé đïëę\n"
-"êáôćóôńáììĘíïò :( Èá đńïóđáèȚóù íá óőíćśßóù áöáéńțíôáò ôéò ëáíèáóìĘíćò \n"
-"êáôáôìȚóćéò (ÏËÁ ÔÁ ÄĆÄÏÌĆÍÁ èá śáèïęí!). Ç Üëëç ćđéëïăȚ óáò ćßíáé íá\n"
-"ìçí ćđéôńĘűćôć óôï DrakX íá áăăßîćé ôïí đßíáêá êáôáôìȚóćùí. \n"
-"Ôï óöÜëìá ćßíáé: %s\n"
-"\n"
-"Óőìöùíćßôć íá äéáăńáöïęí üëćò ïé êáôáôìȚóćéò;\n"
-
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
-#, c-format
-msgid "Error"
-msgstr "ÓöÜëìá"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "server"
-msgstr "ćîőđçńćôçôȚò"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "with /usr"
-msgstr "ìć /usr"
-#: ../../fsedit.pm:1
-#, c-format
-msgid "simple"
-msgstr "áđëü"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "Enabling swap partition %s"
-msgstr "Ćíćńăïđïßçóç êáôÜôìçóçò swap %s"
-
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "error unmounting %s: %s"
-msgstr "óöÜëìá êáôÜ ôçí áđïóęíäćóç ôïő %s: %s"
+msgid "Advanced Configuration"
+msgstr "ĐńïśùńçìĘíćò Ńőèìßóćéò"
-#: ../../fs.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "ç óęíäćóç ôçò êáôÜôìçóçò %s óôïí êáôÜëïăï %s áđĘôőść"
+msgid "Scanning on your HP multi-function device"
+msgstr "ÓÜńùóç óôç đïëőśńçóôéêȚ óőóêćőȚ HP đïő äéáèĘôćôć"
-#: ../../fs.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mounting partition %s"
-msgstr "ĐńïóÜńôçóç êáôÜôìçóçò %s"
+msgid "Root"
+msgstr "Root"
-#: ../../fs.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Checking %s"
-msgstr "žëćăśïò %s"
+msgid "Choose an existing RAID to add to"
+msgstr "ĆđéëĘîôć Ęíá őđÜńśïí RAID óôï ïđïßï èá ăßíćé ç đńïóèȚêç"
-#: ../../fs.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Formatting partition %s"
-msgstr "Ìïńöïđïßçóç êáôÜôìçóçò %s"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "Ôïőńêéêü (ìïíôĘńíï \"Q\" ìïíôĘëï)"
-#: ../../fs.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Äçìéïőńăßá êáé ìïńöïđïßçóç áńśćßïő %s"
+msgid "Lilo message not found"
+msgstr "Äćí âńĘèçêć ôï ìȚíőìá lilo"
-#: ../../fs.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "äćí îĘńù đțò íá ìïńöïđïéȚóù ôï %s óć ôęđï %s"
+msgid ""
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
+msgstr ""
+"Áőôüìáôç đáńáăùăȚ ôçò ćđéêćöáëßäáò ôïő đőńȚíá óôï /boot ăéá ôï\n"
+"/usr/include/linux/{autoconf,version}.h"
-#: ../../fs.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s ìïńöïđïßçóç ôïő %s áđĘôőść"
+msgid "if needed"
+msgstr "áí śńćéÜæćôáé"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"ÊÜíôć êëéê óôï \"Ćđüìćíï ->\" ćÜí èĘëćôć íá äéáăńÜűćôć üëá ôá äćäïìĘíá\n"
-"ôéò êáôáôìȚóćéò đïő âńßóêïíôáé óôïí óêëçńü óáò äßóêï. ĐńïóïśȚ ìćôÜ\n"
-"đïő èá êëéê óôï \"Ćđüìćíï ->\"äćí èá ìđïńćßôć íá áíáêôȚóćôć ôá äćäïìĘíá\n"
-"êáé ôéò êáôáôìȚóćéò đïő âńßóêïíôáé óôïí äßóêï ìáæß êáé ôá Windows\n"
-" Ćđüìćíï\n"
-"\n"
-"ÊÜíôć êëéê óôï \"<- Đńïçăïęìćíï\" ăéá íá ôćńìáôßóćôć ôç ëćéôïőńăßá áőôȚ\n"
-"śùńßò íá śÜóćôć ôá äćäïìĘíá êáé ôéò êáôáôìȚóćéò óáò óôï äßóêï."
+msgid "Restore Failed..."
+msgstr "Ç ĆđáíáöïńÜ ÁđĘôőść..."
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"ĆđéëĘîôć ôïí äßóêï đïő èĘëćôć íá äéáăńÜűćôć ăéá íá ćăêáôáóôȚóćôć \n"
-"ôçí íĘá êáôÜôìçóç Mandrake Linux. ĐŃÏÓÏŚÇ: Œëá ôá äćäïìĘíá èá äéáăńáöïęí\n"
-"êáé èá ćßíáé áäęíáôç ç ćđáíáöïńÜ ôïőò!"
+msgid "/Autodetect _jazz drives"
+msgstr "/Ćíôïđéóìüò _ïäçățí jazz"
-#: ../../help.pm:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
+"Description:\n"
"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
-msgstr ""
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
msgstr ""
-"áíéśíćęèçêć\n"
-"\n"
-"\n"
-"."
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
+"ĐćńéăńáöȚ\n"
"\n"
-"Yaboot's main options are:\n"
+" Drakbackup\n"
"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
+" Óęóôçìá\n"
+" ŚńȚóôćò\n"
+" ¶ëëï\n"
+" Œëá ¶ëëï ÔïìĘáò Windows \n"
"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
+" Drakbackup\n"
"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
+" CDROM\n"
"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot\n"
-" Linux\n"
-" áíéśíćęèçêć\n"
"\n"
"\n"
"\n"
-" Yaboot\n"
-"\n"
-" áđëü\n"
+" Drakbackup\n"
+" śńȚóôçò\n"
"\n"
-" Root\n"
-" Linux\n"
+" ćî' ïńéóìïę\n"
"\n"
"\n"
+" Ńęèìéóç\n"
"\n"
"\n"
-" Linux\n"
+" ĆđáíáöïńÜ\n"
"\n"
-" Root\n"
-" Linux\n"
-" ćî' ïńéóìïę\n"
"\n"
-" Root\n"
"\n"
"\n"
-" Root\n"
"\n"
"\n"
-" ĐńïćđéëćăìĘíï ćî' ïńéóìïę\n"
-"."
-#: ../../help.pm:1
+#: ../../install_messages.pm:1
#, fuzzy, c-format
msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
+"Introduction\n"
"\n"
-"For Linux, there are a few possible options:\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
+"1. License Agreement\n"
"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
+"2. Limited Warranty\n"
"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
+"3. The GPL License and Related Licenses\n"
"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
-msgstr ""
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
"\n"
"\n"
+"4. Intellectual Property Rights\n"
"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
"\n"
"\n"
+"5. Governing Laws \n"
"\n"
-" Linux\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
+msgstr ""
"\n"
-" ĆôéêĘôá\n"
"\n"
+" Linux\n"
"\n"
-" Ćéêüíá\n"
"\n"
+" Linux\n"
"\n"
-" Root óőóêćőȚ Linux\n"
"\n"
+" ¶äćéá\n"
"\n"
-" ćíćńăïđïßçóç\n"
"\n"
"\n"
"\n"
+" ¶äćéá\n"
+" ¶äćéá\n"
"\n"
"\n"
+" ¶äćéá\n"
+" ¶äćéá ¶äćéá\n"
"\n"
"\n"
"\n"
-" Initrd\n"
-" óőóêćőȚ\n"
"\n"
"\n"
-" Initrd ćî' ïńéóìïę\n"
"\n"
-" ćî' ïńéóìïę\n"
"\n"
"\n"
"\n"
-" ćî' ïńéóìïę\n"
"\n"
-" ŚùńßòVideo\n"
"\n"
"\n"
"\n"
-" ĐńïćđéëćăìĘíï ćî' ïńéóìïę Linux\n"
"\n"
-"."
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"IDE\n"
-" PCI\n"
"\n"
"\n"
"\n"
-" PCI Íáé\n"
-" Œśé\n"
"\n"
-" áíéśíćęèçêć\n"
-" Ćđüìćíï Ćđüìćíï\n"
+" Linux\n"
"\n"
"\n"
-" PCI\n"
"\n"
"\n"
+" ¶äćéá\n"
"\n"
"\n"
+" ĂćíéêÜ\n"
"\n"
"\n"
"\n"
-"."
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
+" ¶äćéá Ôćêìçńßùóç\n"
"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
-msgstr ""
-"¶ëëï\n"
-" Linux\n"
"\n"
"\n"
+" Èęńá\n"
"\n"
+" Œëá\n"
"\n"
"\n"
-" áđëü\n"
"\n"
" Linux\n"
"\n"
-" CUPS Ćêôęđùóç Óęóôçìá\n"
-"\n"
-" áđëü ćîőđçńćôçôȚò\n"
"\n"
"\n"
-" ćîőđçńćôçôȚò\n"
-" CUPS\n"
"\n"
"\n"
"\n"
"\n"
-" ćêôćëćßôáé\n"
-"."
+" ¶äćéá Ăáëëßá\n"
+" Œëá\n"
+" Ăáëëßá\n"
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
+"the progress bar x coordinate\n"
+"of its upper left corner"
msgstr ""
+"óőíôćôáăìĘíç y ôçò ăńáììȚò đńïüäïő\n"
+"áđü ôçí ćđÜíù áńéóôćńȚ ăùíßá"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" ĐńïóèȚêç íĘï\n"
-" Ôńïđïđïßçóç Ëßóôá Áöáßńćóçò ĆíôÜîćé\n"
-"\n"
-"\n"
-"\n"
-" ÄéáăńáöȚ\n"
-"\n"
-"\n"
-"!"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Current interface configuration"
+msgstr "Ńęèìéóç ôńĘśïőóáò äéćđáöȚò"
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../printer/data.pm:1
+#, c-format
+msgid "LPD - Line Printer Daemon"
+msgstr "LPD - Line Printer Daemon"
+
+#: ../../network/isdn.pm:1
+#, c-format
msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
msgstr ""
"\n"
+"ĆÜí Ęśćôć ISA êÜńôá, ïé ôéìĘò óôçí ćđüìćíç ïèüíç èá đńĘđćé íá ćßíáé óùóôĘò.\n"
"\n"
-" ŚńȚóç đńïăńÜììáôïò ćêêßíçóçò\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Root óőóêćőȚ ćî' ïńéóìïę\n"
-"\n"
-"\n"
-"\n"
-" ćî' ïńéóìïę\n"
-" śńȚóôçò\n"
-" ćî' ïńéóìïę\n"
-"\n"
-"\n"
-" ĐáńÜëćéűç Linux\n"
-"\n"
-"\n"
-" Ăéá ĐńïśùńçìĘíïőò\n"
-" śńȚóôçò."
+"ĆÜí Ęśćôć PCMCIA êÜńôá, đńĘđćé íá îĘńćôć ôï irq êáé ôï io ôçò êÜńôáò óáò.\n"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
-msgstr ""
+msgid "Do not print any test page"
+msgstr "Śùńßò ćêôęđùóç äïêéìáóôéêȚò óćëßäáò"
-#: ../../help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Đáńáêáëț ćđéëĘîôć ôçí êáôÜëëçëç èęńá. Ăéá đáńÜäćéăìá,\n"
-"ç\"COM1\" óôá Windows ïíïìÜæćôáé \"ttyS0\" óôï GNU/Linux."
+msgid "Gurmukhi"
+msgstr "Ăêïőńìïęêé"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
+#: ../../any.pm:1
+#, c-format
+msgid "Force No APIC"
msgstr ""
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" óćéńéáêü\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" ćî' ïńéóìïę\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Ìć ńïäÜêé áíéśíćęèçêć\n"
-"\n"
-"\n"
-" Ćđüìćíï\n"
-" ćíćńăïđïßçóç ôțńá\n"
-"\n"
-"\n"
-"."
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "This password is too short (it must be at least %d characters long)"
msgstr ""
-"\n"
-"\n"
-"\n"
-"\n"
-" Ăéá ĐńïśùńçìĘíïőò\n"
-"\n"
-"\n"
-" Éóđáíßá\n"
-" ćî' ïńéóìïę Ăéá ĐńïśùńçìĘíïőò\n"
-"\n"
-"\n"
-"\n"
-" Ćđüìćíï\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" śńȚóôçò\n"
-" śńȚóôçò."
+"Áőôüò ï êùäéêüò đńüóâáóçò ćßíáé đïëę áđëüò (đńĘđćé íá Ęśćé ôïőëÜśéóôïí %d "
+"śáńáêôȚńćò)"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
-"ćî' ïńéóìïę\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" ¶ëëá\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"."
+#: ../../standalone.pm:1
+#, c-format
+msgid "[keyboard]"
+msgstr "[đëçêôńïëüăéï]"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
-"ćíćńăïđïßçóç ôțńá Linux\n"
-"\n"
-"\n"
-" íĘï\n"
-" Linux\n"
-"\n"
-" ĆăêáôÜóôáóç\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" ÁíáâÜèìéóç\n"
-" Linux\n"
-" śńȚóôçò\n"
-"\n"
-"\n"
-" ÁíáâÜèìéóç Linux\n"
-" ćêôćëćßôáé ÁíáâÜèìéóç\n"
-" Linux."
+#: ../../network/network.pm:1
+#, c-format
+msgid "FTP proxy"
+msgstr "FTP proxy"
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Install List"
+msgstr "Ëßóôá ĆăêáôÜóôáóçò"
+
+#: ../../standalone/drakbackup:1
+#, c-format
msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
+"Change\n"
+"Restore Path"
msgstr ""
-"\"Śțńá\": ćëĘăîôć ôçí ćđéëïăȚ śțńáò. Áí äćí ćßóôć óć áőôȚ ôç śțńá,\n"
-"êÜíôć êëéê óôï đëȚêôńï êáé ćđéëĘîôć ìéá Üëëç."
+"ÁëëáăȚ\n"
+"ÈĘóç ĆđáíáöïńÜò"
-#: ../../help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
+msgid "Show only for the selected day"
+msgstr "ĆìöÜíéóç ìüíï ăéá ôçí ćđéëćăìĘíç çìĘńá"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
msgstr ""
-"Đćńéóóüôćńćò ôùí ìßá êáôáôìȚóćéò Windows âńĘèçêáí óôïí äßóêï óáò. Đáńáêáëț \n"
-"ćđéëĘîôć đïéá èĘëćôć íá óőńńéêíțóćôć ăéá íá ćăêáôáóôȚóćôć ôï Mandrake "
-"Linux.\n"
-"\n"
-"ÊÜèć êáôÜôìçóç áíáöĘńćôáé ùò: \"Œíïìá Linux\", \"Œíïìá Windows\"\n"
-"\"Śùńçôéêüôçôá\".\n"
-"\n"
-"Ôï üíïìá Linux óçìáßíćé ôá ćîȚò: \"Ôęđïò äßóêïő\",\"áńéèìüò äßóêïő\",\n"
-"\"áńéèìüò êáôÜôìçóçò ăéá đáńÜäćéăìá, \"hda1\").\n"
-"\n"
-"Ï \"Ôęđïò äßóêïő\" ćßíáé \"hd\" ćÜí đńüêćéôáé ăéá äßóêï IDE êáé \"sd\" \n"
-"ăéá SCSI äßóêï.\n"
-"\n"
-"Ï \" áńéèìüò äßóêïő\"ćßíáé đÜíôá Ęíá ăńÜììá ìćôÜ ôï \"hd\" Ț \"sd\". Ăéá\n"
-"ôïőò IDE äßóêïőò: \n"
"\n"
-" * \"a\" ćßíáé ï \"master äßóêïò óôïí đńțôï ćëćăêôȚ IDE\",\n"
"\n"
-" * \"b\" ćßíáé ï \"slave äßóêïò óôïí đńțôï ćëćăêôȚ IDE\",\n"
+" Äçìéïőńăßá Root\n"
"\n"
-" * \"c\" ćßíáé ï \"master äßóêïò óôïí äćęôćńï ćëćăêôȚ IDE\",\n"
"\n"
-" * \"d\" ćßíáé ï \"slave äßóêïò óôïí äćęôćńï ćëćăêôȚ IDE\".\n"
"\n"
-"Ăéá äßóêïőò SCSI, \"a\" ćßíáé ï đńțôïò äßóêïò, \"b\" ćßíáé ï äćęôćńïò "
-"äßóêïò\n"
-" êëđ...\n"
"\n"
-"Ôï \"Œíïìá Windows\" ćßíáé ôï ăńÜììá ôçò êáôÜôìçóçò üđùò öáßíćôáé áđü ôá\n"
-"Windows (ï đńțôïò äßóêïò Ț êáôÜôìçóç ëĘăćôáé \"C:\")."
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
-"To partition the selected hard drive, you can use these options:\n"
"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
+" PCI\n"
"\n"
-"\"More\": gives access to additional features:\n"
"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
"\n"
-"When a partition is selected, you can use:\n"
"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
"\n"
-" * Ctrl-d to delete a partition\n"
"\n"
-" * Ctrl-m to set the mount point\n"
"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
+" ćîőđçńćôçôȚò\n"
"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
+" Óęóôçìá\n"
+" ćíćńăïđïßçóç\n"
"\n"
-" Linux\n"
-" Linux\n"
"\n"
+" ćîőđçńćôçôȚò\n"
"\n"
"\n"
"\n"
-" IDE\n"
"\n"
"\n"
"\n"
@@ -1958,472 +1150,248 @@ msgstr ""
"\n"
"\n"
"\n"
-" ¶ëëá\n"
"\n"
-" ÁđïèȚêćőóç\n"
"\n"
"\n"
"\n"
-" ĆđáíáöïńÜ\n"
"\n"
"\n"
"\n"
+" ćîőđçńćôçôȚò\n"
"\n"
"\n"
"\n"
"\n"
+" ćîőđçńćôçôȚò\n"
"\n"
"\n"
-" ìćôÜ âßáò\n"
"\n"
"\n"
"\n"
-" Ïäçăüò\n"
"\n"
"\n"
"\n"
-" Áíáßńćóç\n"
-"\n"
"\n"
"\n"
"\n"
"\n"
-" Ïëïêëçńțèçêć\n"
+" áđćíćńăïđïßçóç\n"
"\n"
"\n"
-" Đüôć\n"
"\n"
+" śńȚóôçò\n"
+" ćîőđçńćôçôȚò\n"
+" ćîőđçńćôçôȚò\n"
"\n"
"\n"
-" Ïëïêëçńțèçêć\n"
-"\n"
-" Đüôć\n"
+" ćî' ïńéóìïę áđćíćńăïđïßçóç\n"
+" èĘóç\n"
"\n"
-" íĘï\n"
"\n"
-" ÄéáăńáöȚ\n"
+" Äçìéïőńăßá\n"
"\n"
"\n"
"\n"
"\n"
"\n"
"\n"
-" HFS\n"
"\n"
"\n"
"\n"
-"."
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "512 kB"
+msgstr "512 kB"
+
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "Logs"
+msgstr "Çìćńïëüăéá"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "(Note: Parallel ports cannot be auto-detected)"
msgstr ""
-"ćđßđćäï\n"
-" ćđßđćäï\n"
-"\n"
-" Äéáäßêôőï ćđßđćäï\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" ćî' ïńéóìïę."
+"(Óçìćßùóç: Óôéò đáńÜëëçëćò èęńćò äćí ìđïńćß íá ăßíćé áőôüìáôïò ćíôïđéóìüò)"
-#: ../../help.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>N"
+msgstr "<control>N"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "What kind of card do you have?"
+msgstr "Ôé ćßäïőò êÜńôáò Ęśćôć;"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>O"
+msgstr "<control>O"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Security"
+msgstr "ÁóöÜëćéá"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
msgstr ""
-"Linux\n"
-"\n"
-"\n"
-" Äéáäßêôőï\n"
-" Íáé Äéáäßêôőï Œśé\n"
-"\n"
-"\n"
-" Íáé\n"
"\n"
-" ĆăêáôÜóôáóç\n"
-" ¶êőńï."
+" ĆêôőđùôȚò"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#, c-format
+msgid "<control>Q"
+msgstr "<control>Q"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Unknown"
+msgstr "¶ăíùóôï"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "This server is already in the list, it cannot be added again.\n"
msgstr ""
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Ćđüìćíï\n"
-"\n"
-" Đńïçăïęìćíï\n"
-" íĘï Linux\n"
-"\n"
-" Ăéá ĐńïśùńçìĘíïőò\n"
-"."
+"O ćîőđçńćôçôȚò ćßíáé Țäç óôç ëßóôá, äćí ìđïńćßôć íá ôïí đńïóèĘóćôć îáíÜ.\n"
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#, c-format
+msgid "Network Configuration"
+msgstr "Ńőèìßóćéò äéêôęïő"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>S"
+msgstr "<control>S"
+
+#: ../../network/isdn.pm:1
+#, c-format
msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
msgstr ""
-"Linux\n"
-" Ćđüìćíï\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Ăéá ĐńïśùńçìĘíïőò\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Ćđáíáöüńôùóç\n"
-"\n"
-"\n"
-" Áőôüìáôï\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" ÁđïèȚêćőóç\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Linux\n"
+"Đńùôüêïëëï őđüëïéđïő êüóìïő\n"
+" śùńßò D-Channel (ìéóèùìĘíćò ăńáììĘò)"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s must be a number!"
+msgstr "Ç ćđéëïăȚ %s đńĘđćé íá ćßíáé áńéèìüò!"
+
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#, c-format
+msgid "Notice"
+msgstr "Óçìćßùóç"
+
+#: ../../security/help.pm:1
#, fuzzy, c-format
msgid ""
-"At this point, you need to decide where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space you will\n"
-"have to partition the drive. Basically, partitioning a hard drive consists\n"
-"of logically dividing it to create the space needed to install your new\n"
-"Mandrake Linux system.\n"
-"\n"
-"Because the process of partitioning a hard drive is usually irreversible\n"
-"and can lead to lost data if there is an existing operating system already\n"
-"installed on the drive, partitioning can be intimidating and stressful if\n"
-"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
-"simplifies this process. Before continuing with this step, read through the\n"
-"rest of this section and above all, take your time.\n"
-"\n"
-"Depending on your hard drive configuration, several options are available:\n"
-"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
-"\n"
-" Before choosing this option, please understand that after this\n"
-"procedure, the size of your Microsoft Windows partition will be smaller\n"
-"then when you started. You will have less free space under Microsoft\n"
-"Windows to store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
-"\n"
-" !! If you choose this option, all data on your disk will be deleted. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
+"Arguments: (arg)\n"
"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+" Activate/Disable daily security check."
msgstr ""
"\n"
-" Linux\n"
-"\n"
-"\n"
-" íĘï\n"
-" Linux\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" śńȚóôçò\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" áíéśíćęèçêć\n"
-" Linux\n"
-"\n"
-" ćî' ïńéóìïę\n"
-"\n"
-"\n"
-" ÔïìĘáò Windows ÔïìĘáò Windows \n"
-"\n"
-" Linux ÄéáăńáöȚ\n"
-" ÔïìĘáò Windows \n"
-" ÔïìĘáò Windows ÁëëáăȚ ìćăĘèïőò\n"
-"\n"
-" ÔïìĘáò Windows \n"
-"\n"
-" Linux ÔïìĘáò Windows \n"
-"\n"
-"\n"
-" ÔïìĘáò Windows \n"
-"\n"
-" ÔïìĘáò Windows íĘï\n"
-"\n"
-" ÄéáăńáöȚ\n"
-" íĘï Linux\n"
-"\n"
-"\n"
"\n"
-"\n"
-"\n"
-" Ëßóôá Áöáßńćóçò ÔïìĘáò Windows \n"
-" Œëá\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" ĐńïóáńìïóìĘíï\n"
-"\n"
-"\n"
-" Ïëïêëçńțèçêć\n"
-"\n"
-"\n"
-"."
+" êáèçìćńéíÜ."
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../security/help.pm:1
+#, c-format
msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"\n"
+"Arguments: (arg)\n"
"\n"
-" Œśé\n"
-" ćîőđçńćôçôȚò\n"
-"."
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
msgstr ""
-"\n"
-" ćîőđçńćôçôȚò\n"
-"."
-#: ../../help.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr "Äćí Ęśćôć ńőèìßóćé ôï Ś. Ćßóôć âĘâáéïé üôé èĘëćôć íá ôï êÜíćôć;"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
-msgstr ""
-"ÁíÜëőóç\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"."
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr "áíéśíćęèçêć."
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "What type of partitioning?"
+msgstr "Ôé ôęđïò êáôÜôìçóçò;"
+
+#: ../../standalone/drakbackup:1
+#, c-format
msgid ""
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
+"file list sent by FTP: %s\n"
+" "
msgstr ""
-"Ïèüíç\n"
-"\n"
-"\n"
-"\n"
-"."
+"áđïóôïëȚ ëßóôáò áńśćßùí ìĘóù FTP: %s\n"
+" "
-#: ../../help.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Interface"
+msgstr "ÄéćđáöȚ"
+
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
+"Options Description:\n"
"\n"
+" - Backup System Files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
"\n"
+" - Backup User Files: \n"
"\n"
-"Test\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+" - Backup Other Files: \n"
"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane. To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
-"Options\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
-" You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
msgstr ""
-"Óęóôçìá Linux\n"
-"\n"
-" Linux\n"
-"\n"
-"\n"
"\n"
"\n"
"\n"
@@ -2431,32 +1399,25 @@ msgstr ""
"\n"
"\n"
"\n"
-" ćîőđçńćôçôȚò\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Ïèüíç\n"
-"\n"
"\n"
+" ÏìÜäá ćńăáóßáò:\n"
"\n"
"\n"
+" ŚńȚóôçò\n"
"\n"
"\n"
"\n"
-" ÁíÜëőóç\n"
"\n"
"\n"
"\n"
+" ¶ëëï\n"
"\n"
"\n"
"\n"
"\n"
"\n"
-" ÄïêéìȚ\n"
"\n"
"\n"
-" Íáé\n"
"\n"
"\n"
"\n"
@@ -2464,445 +1425,125 @@ msgstr ""
"\n"
"\n"
"\n"
-" ĆđéëïăĘò\n"
"\n"
"\n"
"\n"
-" Œśé ćîőđçńćôçôȚò\n"
-"."
-#: ../../help.pm:1
+#: ../../security/help.pm:1
#, fuzzy, c-format
msgid ""
-"Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
msgstr ""
"\n"
"\n"
"\n"
"\n"
-"\n"
-"\n"
-"\n"
-" ćîőđçńćôçôȚò\n"
-"."
+" óőóêćőȚ."
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
+#: ../../modules/parameters.pm:1
+#, c-format
+msgid "comma separated strings"
msgstr ""
-"Linux\n"
-"\n"
-"\n"
-" HardDrake Linux\n"
-"\n"
-" ÔïìĘáò Windows \n"
-"\n"
-"\n"
-" ćîőđçńćôçôȚò Äéáäßêôőï\n"
-" Äéáäßêôőï\n"
-" ćîőđçńćôçôȚò\n"
-" ćîőđçńćôçôȚò."
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "These are the machines from which the scanners should be used:"
msgstr ""
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" ćî' ïńéóìïę\n"
-"\n"
-"\n"
-" ćîőđçńćôçôȚò\n"
-"\n"
-" ćîőđçńćôçôȚò\n"
-"!"
+"ÁőôÜ ćßíáé ôá ìçśáíȚìáôá áđü üđïő ïé óáńùôĘò èá đńĘđćé íá śńçóéìïđïéçèïęí:"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
-"ĆêôőđùôȚò Œśé ĆêôőđùôȚò\n"
-"\n"
-" íĘï\n"
-"."
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Messages"
+msgstr "Ìçíęìáôá"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
-"\n"
-"When configuring your network, the available connections options are:\n"
-"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
-"simple LAN connection (Ethernet).\n"
-"\n"
-"We will not detail each configuration option - just make sure that you have\n"
-"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
-"from your Internet Service Provider or system administrator.\n"
-"\n"
-"You can consult the ``Starter Guide'' chapter about Internet connections\n"
-"for details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection."
-msgstr ""
-"Äéáäßêôőï\n"
-" Äéáäßêôőï Ćđüìćíï\n"
-" Linux\n"
-"\n"
-"\n"
-" ¶êőńï\n"
-"\n"
-" Đüôć\n"
-"\n"
-" áđëü\n"
-"\n"
-"\n"
-" ćî' ïńéóìïę\n"
-" Äéáäßêôőï\n"
-"\n"
-" Äéáäßêôőï\n"
-"\n"
-"."
+#: ../../harddrake/v4l.pm:1
+#, c-format
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr "¶ăíùóôï|CPH06X (bt878) [đïëëïß êáôáóêćőáóôĘò]"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" ćîőđçńćôçôȚò\n"
-" ÏìÜäá ćńăáóßáò:\n"
-"\n"
-" ćî' ïńéóìïę Linux\n"
-"\n"
-"\n"
-" Linux\n"
-"\n"
-" Œśé Íáé\n"
-"\n"
-" ćî' ïńéóìïę\n"
-"\n"
-" áđćíćńăïđïßçóç\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"."
+#: ../../network/drakfirewall.pm:1
+#, c-format
+msgid "POP and IMAP Server"
+msgstr "ĆîőđçńćôçôȚò POP êáé IMAP"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"\n"
-" Linux\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Linux\n"
-"\n"
-"\n"
-" Óôáèìüò Ćńăáóßáò\n"
-" ÁíÜđôőîç\n"
-"\n"
-" Óôáèìüò Ćńăáóßáò\n"
-"\n"
-"\n"
-"\n"
-" ÁíÜđôőîç\n"
-"\n"
-"\n"
-" ĆîőđçńćôçôȚò ćîőđçńćôçôȚò\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Ìćôáêßíçóç óć ćîĘëéîç ÏìÜäá ćńăáóßáò:\n"
-" ÏìÜäá ćńăáóßáò:\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" ćîőđçńćôçôȚò\n"
-"\n"
-"\n"
-" Linux\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" ÁíáâÜèìéóç\n"
-" íĘï\n"
-"."
+#: ../../lang.pm:1
+#, c-format
+msgid "Mexico"
+msgstr "Ìćîéêü"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
-msgstr ""
-"Ç ćăêáôÜóôáóç ôïő Mandrake Linux ćßíáé ìïéńáóìĘíï óć áńêćôÜ CD-ROM. Ôï \n"
-"DrakX îĘńćé áí Ęíá ćđéëćăìĘíï đáêĘôï őđÜńśćé óć Üëëï CD-ROM, èá ćîÜăćé ôï \n"
-"ôńĘśïí CD êáé èá æçôȚóćé íá ćéóÜăćôć Ęíá Üëëï üôáí áőôü èá śńćéáóôćß."
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Model stepping"
+msgstr "ÌïíôĘëï âçìáôéóìïę"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Linux áíéśíćęèçêć\n"
-"\n"
-"\n"
-" Ïëïêëçńțèçêć\n"
-"\n"
-"\n"
-" Linux\n"
-"\n"
-" Œíïìá\n"
-"\n"
-" Œíïìá\n"
-"\n"
-"\n"
-" IDE\n"
-"\n"
-"\n"
-" IDE\n"
-"\n"
-"\n"
-" đńùôćęïőóá IDE\n"
-"\n"
-" đńùôćęïőóá IDE\n"
-"\n"
-" äćőôćńćęïőóá IDE\n"
-"\n"
-" äćőôćńćęïőóá IDE\n"
-"\n"
-"\n"
-"."
+#: ../../lang.pm:1
+#, c-format
+msgid "Rwanda"
+msgstr "ŃïőÜíôá"
+
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "Do you have any %s interfaces?"
+msgstr "žśćôć êÜđïéïí đńïóáńìïăĘá %s;"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Switzerland"
+msgstr "Ćëâćôßá"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Brunei Darussalam"
+msgstr "ÌđńïőíĘé ÍôáńïőóáëÜì"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Remote lpd Printer Options"
+msgstr "ĆđéëïăĘò áđïìáêńőóìĘíïő lpd ćêôőđùôȚ"
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
"system administrator, the users you add at this point will not be\n"
"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
"that can automatically log into the system when the computer boots up. If\n"
"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
msgstr ""
"Linux śńȚóôçò śńȚóôçò\n"
"\n"
@@ -2942,634 +1583,708 @@ msgstr ""
" Ïëïêëçńțèçêć\n"
"."
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
-msgstr ""
-"\n"
-" Linux\n"
-" ÁđïäïśȚ\n"
-"."
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Configure Internet Access..."
+msgstr "Ńęèìéóç Đńüóâáóçò óôï Äéáäßêôőï..."
-#: ../../install2.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "You must also format %s"
-msgstr "ĐńĘđćé ćđßóçò íá ìïńöïđïéȚóćôć ôï %s"
+msgid "Norway"
+msgstr "Íïńâçăßá"
-#: ../../install2.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Áäőíáìßá đńüóâáóçò ôùí áńèńùìÜôùí đïő áíôéóôïéśïęí óôïí đőńȚíá óáò (ôï "
-"áńśćßï %s ëćßđćé), ăćíéêÜ áőôü óçìáßíćé üôé ç äéóêĘôá ćêêßíçóçò äćí ćßíáé óć "
-"óőăśńïíéóìü ìć ôï ÌĘóï ćăêáôÜóôáóçò ( đáńáêáëț äçìéïőńăȚóôć ìéá íĘá äéóêĘôá "
-"ćêêßíçóçò)"
+msgid "Danish"
+msgstr "Äáíéêü"
-#: ../../install_any.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
msgstr ""
-"ĐńïêëȚèçêć óöÜëìá - äćí âńĘèçêáí óőóêćőĘò óôéò ïđïßćò íá ćßíáé äőíáôȚ ç "
-"äçìéïőńăßá íĘùí óőóôçìÜôùí áńśćßùí. Đáńáêáëț ćëĘăîôć ôï őëéêü óáò ăéá ôçí "
-"áéôßá áőôïę ôïő đńïâëȚìáôïò"
+"Áőôüìáôç ćíćńăïđïßçóç ôïő numlock đëȚêôńïő óôçí êïíóüëá\n"
+"êáé ôï XFree êáôÜ ôçí ćêêßíçóç ôïő óőóôȚìáôïò."
-#: ../../install_any.pm:1 ../../partition_table.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Error reading file %s"
-msgstr "ÓöÜëìá êáôÜ ôçí áíÜăíùóç ôïő áńśćßïő %s"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+"Đáńáêáëț ćéóÜăćôć ôéò IP ńőèìßóćéò ăéá áőôü ôï óęóôçìá.\n"
+"ÊÜèć óôïéśćßï đńĘđćé íá ćéóáśèćß ùò IP äéćęèőíóç ìć áńéèìïęò\n"
+"śùńéóìĘíïőò ìć ôćëćßćò (đáńÜäćéăìá: 1.2.3.4)."
-#: ../../install_any.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
msgstr ""
-"Ăéá íá śńçóéìïđïéȚóćôć áőôȚí ôçí áđïèçêćőìĘíç ćđéëïăȚ đáêĘôùí, îćêéíȚóôć ôçí "
-"ćăêáôÜóôáóç ìć ``linux defcfg=floppy''"
+"Ç ćăêáôÜóôáóç ôïő Mandrake Linux ćßíáé ìïéńáóìĘíï óć áńêćôÜ CD-ROM. Ôï \n"
+"DrakX îĘńćé áí Ęíá ćđéëćăìĘíï đáêĘôï őđÜńśćé óć Üëëï CD-ROM, èá ćîÜăćé ôï \n"
+"ôńĘśïí CD êáé èá æçôȚóćé íá ćéóÜăćôć Ęíá Üëëï üôáí áőôü èá śńćéáóôćß."
-#: ../../install_any.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "ÁőôȚ ç äéóêĘôá äćí Ęśćé ìïńöïđïßçóç FAT"
+msgid "Processors"
+msgstr "ĆđćîćńăáóôĘò"
-#: ../../install_any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "ĆéóÜăćôć ìéá ìïńöïđïéçìĘíç äéóêĘôá FAT óôïí ïäçăü %s"
+msgid "Bulgaria"
+msgstr "Âïőëăáńßá"
-#: ../../install_any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Äćí ìđïńț íá śńçóéìïđïéȚóù broadcast śùńßò ôïìĘá NIS"
+msgid "No NIC selected!"
+msgstr "Äć ćđéëĘśôçêć NIC!"
-#: ../../install_any.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Svalbard and Jan Mayen Islands"
+msgstr "ÍȚóïé ÓâÜëìđáńíô êáé Ăéáí ÌÜăéćí"
+
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
msgstr ""
-"Ôá đáńáêÜôù đáêĘôá èá áöáéńćèïęí ăéá íá áíáâáèìéóôćß ôï óęóôçìÜ óáò: %s\n"
-"\n"
-"\n"
-"ÈĘëćôć đńáăìáôéêÜ íá áöáéńĘóôć áőôÜ ôá đáêĘôá;\n"
+"ĐńïâëȚìáôá êáôÜ ôç ńęèìéóç.\n"
+"ÄïêéìÜóôć ôç óęíäćóç ìć ôï net_monitor Ț ôï mcc. Áí äćí ëćéôïőńăȚóćé ç "
+"óęíäćóç, ôüôć èá đńĘđćé íá ćêêéíȚóćôć îáíÜ ôç ńęèìéóç."
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No"
-msgstr "Œśé"
+msgid "partition %s is now known as %s"
+msgstr "Ç êáôÜôìçóç %s ćßíáé ôțńá ăíùóôȚ ùò %s "
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Yes"
-msgstr "Íáé"
+msgid "Backup Other files..."
+msgstr "Áíôßăńáöï Áóöáëćßáò ¶ëëùí áńśćßùí..."
-#: ../../install_any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
+msgid "SMB server IP"
+msgstr "IP äéćęèőíóç SMB ćîőđçńćôçôȚ"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Congo (Kinshasa)"
msgstr ""
-"žśćôć ćđéëĘîćé ôïőò đáńáêÜôù äéáêïìéóôĘò(ç): %s\n"
-"\n"
-"\n"
-"Áőôïß ïé äéáêïìéóôĘò ćßíáé ćî ïńéóìïę ćíćńăćß. Äćí Ęśïőí êÜđïéï ăíùóôü "
-"đńüâëçìá\n"
-"áóöÜëćéáò, áëëÜ ìđïńïęí íá âńćèïęí íĘá. Óć áőôȚ ôçí đćńßđôùóç âćâáéùèćßôć "
-"üôé\n"
-"Ęśćôć ćăêáôáóôȚóćé ôçí ôćëćőôáßá Ęêäïóç ôï óőíôïìüôćńï.\n"
-"\n"
-"\n"
-"Ćßóôć âĘâáéïé ăéá ôçí ćăêáôÜóôáóç áőôțí ôùí äéáêïìéóôțí;\n"
-#: ../../install_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "System configuration"
-msgstr "Ńęèìéóç óőóôȚìáôïò"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "Ï đßíáêáò êáôáôìȚóćùí ôïő äßóêïő %s èá áđïèçêćőôćß óôïí äßóêï!"
-#: ../../install_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "System installation"
-msgstr "ĆăêáôÜóôáóç"
+msgid "Installing HPOJ package..."
+msgstr "ĆăêáôÜóôáóç đáêĘôïő HPOJ..."
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Bringing down the network"
-msgstr "ÄéáêïđȚ ëćéôïőńăßáò äéêôęïő"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr ""
+"Ìéá đńïóáńìïóìĘíç äéóêĘôá ćêêßíçóçò óáò äßíćé ôçí äőíáôüôçôá íá ćêêéíȚóćôć\n"
+"ôï óęóôçìÜ óáò śùńßò ôçí śńȚóç ôïő đńïăńÜììáôïò ćêêßíçóçò. Áőôü ćßíáé "
+"śńȚóéìï ćÜí äćí èĘëćôć\n"
+"íá ćăêáôáóôȚóćôć ôï LILO (Ț ôï grub), ćÜí êÜđïéï Üëëï ëćéôïőńăéêü "
+"êáôáóôńĘűćé ôï LILO\n"
+"Ț ćÜí ïé ńőèìßóćéò óáò äćí ćđéôńĘđïőí ôç śńȚóç LILO. ÁőôȚ ç äéóêĘôá ìđïńćß\n"
+"ćđßóçò íá śńçóéìïđïéçèćß óć óőíäőáóìü ìć ôçí äéóêĘôá äéÜóùóçò ôïő Mandrake,\n"
+"êÜíïíôáò ćőêïëüôćńç ôçí ćđáíáöïńÜ ôïő óőóôȚìáôïò ìćôÜ áđü óïâáńȚ âëÜâç.\n"
+"ÈĘëćôć íá äçìéïőńăȚóćôć äéóêĘôá ćêêßíçóçò;\n"
+"%s"
-#: ../../install_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Bringing up the network"
-msgstr "Ćêêßíçóç äéêôęïő"
+msgid ", USB printer \\#%s"
+msgstr ", ćêôőđùôȚò USB \\#%s"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Ç êáôÜôìçóç áđĘôőść: %s"
+msgid "Latvian"
+msgstr "Ëćôïíéêü"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Ï Ïäçăüò ÊáôÜôìçóçò DrakX âńȚêć ôéò đáńáêÜôù ëęóćéò:"
+msgid "monthly"
+msgstr "ìçíéáßá"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "I can't find any room for installing"
-msgstr "Äćí ìđïńț íá âńù áńêćôü śțńï ăéá ćăêáôÜóôáóç"
+msgid "Module name"
+msgstr "Œíïìá áńèńțìáôïò"
-#: ../../install_interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+msgid "Start at boot"
+msgstr "Óôçí ćêêßíçóç óőóôȚìáôïò"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use Incremental Backups"
msgstr ""
-"Ìđïńćßôć ôțńá íá êáôáôìȚóćôć ôïí äßóêï %s\n"
-"Œôáí ôćëćéțóćôć, ìçí îćśÜóćôć íá áđïèçêćęóćôć đáôțíôáò `w'"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Use fdisk"
-msgstr "ŚńȚóç fdisk"
+msgid "First sector of drive (MBR)"
+msgstr "Đńțôïò ôïìĘáò ôïő äßóêïő (MBR)"
-#: ../../install_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Custom disk partitioning"
-msgstr "ĐńïóáńìïóìĘíćò êáôáôìȚóćéò äßóêïő"
+msgid "Joystick"
+msgstr "Joystick"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"Œëćò ïé őđÜńśïőóćò êáôáôìȚóćéò êáé ôá äćäïìĘíá ôïőò óôïí äßóêï %s èá śáèïęí"
+msgid "El Salvador"
+msgstr "Ćë Óáëâáäüń"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"žśćôć đćńéóóüôćńïőò áđü Ęíáí äßóêïőò, óć đïéüí èĘëćôć íá ćăêáôáóôȚóćôć ôï "
-"Linux;"
+msgid "Use Unicode by default"
+msgstr "ĐńïćđéëćăìĘíç ç śńȚóç Unicode"
-#: ../../install_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Erase entire disk"
-msgstr "ÄéáăńáöȚ ïëüêëçńïő ôïő äßóêïő"
+msgid "the module of the GNU/Linux kernel that handles the device"
+msgstr "ôï Üńèńùìá ôïő đőńȚíá GNU/Linux đïő śćéńßæćôáé ôçí óőóêćőȚ"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Áöáßńćóç Windows(TM)"
+msgid "Trying to rescue partition table"
+msgstr "ĐńïóđÜèćéá äéÜóùóçò đßíáêá êáôáôìȚóćùí"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr ""
-"Äćí őđÜńśćé êáôÜìôçóç FAT ăéá áëëáăȚ ìćăĘèïőò (Ț äćí őđÜńśćé áńêćôüò śțńïò)"
+msgid "Option %s must be an integer number!"
+msgstr "Ç ćđéëïăȚ %s đńĘđćé íá ćßíáé áêĘńáéïò áńéèìüò!"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"Entries you'll have to fill:\n"
+"%s"
msgstr ""
+"Đćäßá đïő èá đńĘđćé íá óőìđëçńțóćôć:\n"
+"%s"
-#: ../../install_interactive.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "ÁëëáăȚ ìćăĘèïőò FAT áđĘôőść: %s"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "Äćí ìđïńț íá îćêéíȚóù ôï live upgrade!!!\n"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Resizing Windows partition"
-msgstr "Ăßíćôáé áëëáăȚ ôéò êáôÜôìçóçò ôùí Windows"
+msgid "Name: "
+msgstr "Œíïìá: "
+
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "16 million colors (24 bits)"
+msgstr "16 ćêáôïììęńéá śńțìáôá (24 bits)"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Allow all users"
+msgstr "ĆđéôńĘđćôáé ăéá üëïőò ôïőò śńȚóôćò"
+
+#: ../../share/advertising/08-store.pl:1
+#, c-format
+msgid "The official MandrakeSoft Store"
+msgstr "Ôï ćđßóçìï êáôÜóôçìá ôçò MandrakeSoft"
#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Resizing"
msgstr "ÁëëáăȚ ìćăĘèïőò"
-#: ../../install_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "partition %s"
-msgstr "êáôÜôìçóç %s"
+msgid "Cable connection"
+msgstr "ÊáëùäéáêȚ óęíäćóç"
-#: ../../install_interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Ôé śțńï èĘëćôć íá êńáôȚóćôć ăéá ôá windows óôï"
+msgid "User"
+msgstr "ŚńȚóôçò"
-#: ../../install_interactive.pm:1
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"WARNING!\n"
+"I can't read the partition table of device %s, it's too corrupted for me :(\n"
+"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
+"The other solution is to not allow DrakX to modify the partition table.\n"
+"(the error is %s)\n"
"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
+"Do you agree to loose all the partitions?\n"
msgstr ""
-"ĐŃÏÓÏŚÇ!\n"
+"Äćí ìđïńț íá äéáâÜóù ôïí đßíáêá êáôáôìȚóćùí ôçò óőóêćőȚò %s,, ćßíáé đïëę\n"
+"êáôćóôńáììĘíïò :( Èá đńïóđáèȚóù íá óőíćśßóù áöáéńțíôáò ôéò ëáíèáóìĘíćò \n"
+"êáôáôìȚóćéò (ÏËÁ ÔÁ ÄĆÄÏÌĆÍÁ èá śáèïęí!). Ç Üëëç ćđéëïăȚ óáò ćßíáé íá\n"
+"ìçí ćđéôńĘűćôć óôï DrakX íá áăăßîćé ôïí đßíáêá êáôáôìȚóćùí. \n"
+"Ôï óöÜëìá ćßíáé: %s\n"
"\n"
-"Ôï DrakX đńĘđćé ôțńá íá áëëÜîćé ôï ìĘăćèïò ôçò êáôÜôìçóçò ôùí Windows.\n"
-"Ç äéáäéêáóßá áőôȚ ćìđćńéĘśćé êéíäęíïőò. ĆÜí äćí ôï Ęśćôć êÜíćé Țäç,\n"
-"âăćßôć áđü ôçí ćăêáôÜóôáóç ćëĘăîćôć ôçí êáôÜôìçóç ìć ôï \n"
-"scandisk ìĘóá áđü ôá Windows êáé êáôÜ đćńßđôùóç ôçí áđïêáôáêćńìÜôéóç \n"
-"(defragment). ÌćôÜ îćêéíȚóôć îáíÜ ôçí ćăêáôÜóôáóç.\n"
-"ÌćôÜ èá đńĘđćé íá êńáôȚóćôć áíôßăńáöï áóöáëćßáò ôùí äćäïìĘíùí óáò.\n"
-"ĆÜí ćßóôć óßăïőńïé, đáôȚóôć ĆíôÜîćé."
+"Óőìöùíćßôć íá äéáăńáöïęí üëćò ïé êáôáôìȚóćéò;\n"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr "Ïëïêëçńțèçêć íĘï"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer on parallel port \\#%s"
+msgstr "ĆêôőđùôȚò óôçí đáńÜëëçëç èȚńá \\#%s"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Name"
+msgstr "Œíïìá"
+
+#: ../../raid.pm:1
+#, c-format
+msgid "mkraid failed"
+msgstr "áđïôőśßá mkraid"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Button 3 Emulation"
+msgstr "Đńïóïìïßùóç 3 Êïőìđéțí"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Sending files..."
+msgstr "ÁđïóôïëȚ áńśćßùí..."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Israeli (Phonetic)"
+msgstr "ÉóńáȚë (öùíçôéêü)"
+
+#: ../../any.pm:1
+#, c-format
+msgid "access to rpm tools"
+msgstr "đńüóâáóç óć ćńăáëćßá rpm"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "edit"
+msgstr "ćđćîćńăáóßá"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "You must choose/enter a printer/device!"
+msgstr "ĐńĘđćé íá ćđéëĘîôć/ïńßóćôć ìéá óőóêćőȚ/ćêôőđùôȚ!"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Permission problem accessing CD."
+msgstr "Đńüâëçìá äéêáéùìÜôùí óôçí đńüóâáóç ôïő CD."
+
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Phone number"
+msgstr "Áńéèìüò ôçëćöțíïő"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr "ÓöÜëìá: Ï ïäçăüò \"%s\" ôçò êÜńôáò Țśïő óáò äćí őđÜńśćé óôç ëßóôá"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer name, description, location"
+msgstr "Œíïìá ćêôőđùôȚ, đćńéăńáöȚ, èĘóç"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (broadcast)"
+msgstr "USA (ćíáĘńéá)"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
+"Please choose the\n"
+"media for backup."
msgstr ""
-"Ç êáôÜôìçóç ôùí Windows ćßíáé đïëę êáôáêćńìáôéóìĘíç, đáńáêáëț ôńĘîôć đńțôá "
-"ôï ``defrag'' ìĘóá áđü ôá Windows êáé îćêéíȚóôć îáíÜ ôçí ćăêáôÜóôáóç ôïő "
-"Mandrake Linux "
+"Đáńáêáëț ćđéëĘîôć ôï \n"
+"ìĘóï ăéá ôá áíôßăńáöá \n"
+"áóöáëćßáò"
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Őđïëïăßæćôáé ôï ìĘăćèïò ôçò êáôÜôìçóçò ôùí Windows"
+msgid "Use Xinerama extension"
+msgstr "ŚńȚóç ćđĘêôáóçò Xinerama"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Loopback"
+msgstr "Loopback"
+
+#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
msgstr ""
-"Äćí ìđïńț íá áëëÜîù ìĘăćèïò óôçí êáôÜôìçóç FAT, \n"
-"đńïêëȚèçêć ôï đáńáêÜôù ëÜèïò: %s"
+"Áäőíáìßá óùóôïę ôćńìáôéóìïę ôïő mkbootdisk: \n"
+" %s \n"
+" %s"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Óć ôé ôęđï êáôÜôìçóçò èĘëćôć íá áëëÜîćôć ìĘăćèïò;"
+msgid "West Europe"
+msgstr "ÄőôéêȚ Ćőńțđç"
-#: ../../install_interactive.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "ŚńȚóç ôïő ćëćęèćńïő śțńïő óôçí êáôÜôìçóç ôùí Windows"
+msgid ""
+"[OPTIONS] [PROGRAM_NAME]\n"
+"\n"
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"Äćí őđÜńśćé êáôÜôìçóç FAT ăéá śńȚóç ùò loopback (Ț äćí őđÜńśćé áńêćôüò śțńïò)"
+msgid "Harddrake2 version %s"
+msgstr "žêäïóç Harddrake2 %s"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Swap partition size in MB: "
-msgstr "ÌĘăćèïò êáôÜôìçóçò swap óć MB"
+msgid "Copying %s"
+msgstr "ÁíôéăńáöȚ %s"
-#: ../../install_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Root partition size in MB: "
-msgstr "ÌĘăćèïò âáóéêȚò êáôÜôìçóçò óőóôȚìáôïò óć MB:"
+msgid "Choose color"
+msgstr "ĆđéëĘîôć śńțìá"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose the sizes"
-msgstr "ĆđéëĘîôć ôá ìćăĘèç"
+msgid "Dominican Republic"
+msgstr "ÄïìéíéêáíȚ Äçìïêńáôßá"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Đïéá êáôÜôìçóç èĘëćôć íá śńçóéìïđïéȚóćôć ăéá ôï Linux4Win;"
+msgid "Swaziland"
+msgstr "ÓïőáæéëÜíäç"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "ŚńȚóç êáôÜôìçóçò Windows ăéá loopback"
+msgid "Set-UID"
+msgstr "Ïńéóìüò UID"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "There is no existing partition to use"
-msgstr "Äćí őđÜńśïőí êáôáôìȚóćéò đńïò śńȚóç"
+msgid "Please check if you are using CDRW media"
+msgstr "Đáńáêáëț ïńßóôć áí êÜíćôć śńȚóç óőóêćőȚò CDRW"
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
+msgstr ""
+"ĆđéëĘîôć ôïí äßóêï đïő èĘëćôć íá äéáăńÜűćôć ăéá íá ćăêáôáóôȚóćôć \n"
+"ôçí íĘá êáôÜôìçóç Mandrake Linux. ĐŃÏÓÏŚÇ: Œëá ôá äćäïìĘíá èá äéáăńáöïęí\n"
+"êáé èá ćßíáé áäęíáôç ç ćđáíáöïńÜ ôïőò!"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use existing partitions"
-msgstr "ŚńȚóç őđáńśïőóțí êáôáôìȚóćùí"
+msgid " on parallel port \\#%s"
+msgstr " óôç đáńÜëëçëç èȚńá \\#%s"
-#: ../../install_interactive.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Äćí őđÜńśćé áńêćôüò ćëćęèćńïò śțńïò ăéá äçìéïőńăßá íĘùí êáôáôìȚóćùí"
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "Use the %c and %c keys for selecting which entry is highlighted."
-#: ../../install_interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Use free space"
-msgstr "ŚńȚóç ćëćęèćńïő śțńïő"
+msgid "Generic 2 Button Mouse"
+msgstr "Ăćíéêïę ôęđïő ìć 2 đëȚêôńá"
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../lvm.pm:1
#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "ĐńĘđćé íá Ęśćôć ìéá êáôÜôìçóç FAT mounted óôï /boot/efi"
+msgid "Remove the logical volumes first\n"
+msgstr "ÁöáéńĘóôć đńțôá ôéò ëïăéêĘò ìïíÜäćò\n"
-#: ../../install_interactive.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"You don't have a swap partition.\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Äćí Ęśćôć ïńßóćé êáôÜôìçóç swap\n"
-"\n"
-"Íá óőíćśßóù;"
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "The highlighted entry will be booted automatically in %d seconds."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
msgstr ""
-"ĐńĘđćé íá Ęśćôć ìéá âáóéêȚ êáôÜôìçóç.\n"
-"ÄçìéïőńăȚóôć Ț ćđéëĘîôć ìéá êáôÜôìçóç.\n"
-"ÌćôÜ ïńßóôć ùò óçìćßï óęíäćóçò ôï `/'"
+"Áäőíáìßá ćăăńáöȚò /etc/sysconfig/bootsplash\n"
+"Ôï áńśćßï äćí âńĘèçêć."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet access"
+msgstr "Đńüóâáóç óôï Äéáäßêôőï"
+
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
+"y coordinate of text box\n"
+"in number of characters"
msgstr ""
-"žíá ìĘńïò ôïő őëéêïę óáò śńćéÜæćôáé ``éäéüêôçôïőò'' ïäçăïęò ăéá íá "
-"ëćéôïőńăȚóćé.\n"
-"Ìđïńćßôć íá âńćßôć óśćôéêĘò đëçńïöïńßćò óôï: %s"
+"óőíôćôáăìĘíç y ôïő đëáéóßïő êćéìĘíïő\n"
+"óć áńéèìü śáńáêôȚńùí"
-#: ../../install_messages.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
msgstr ""
-"ÓőăśáńçôȚńéá, ç ćăêáôÜóôáóç ïëïêëçńțèçêć.\n"
-"ÁöáéńĘóôć ôçí äéóêĘôá Ț ôï CD ćêêßíçóçò êáé đáôȚóôć return ăéá "
-"ćđáíćêêßíçóç.\n"
-"\n"
-"\n"
-"Ăéá đëçńïöïńßćò óśćôéêÜ ìć äéïńèțóćéò áőôȚò ôçò Ęêäïóçò ôïő Mandrake Linux,\n"
-"óőìâïőëćőôćßôć ôçí óćëßäá: \n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Đëçńïöïńßćò óśćôéêÜ ìć ôéò ńőèìßóćéò ôïő óőóôȚìáôüò óáò őđÜńśïőí óôï "
-"óśćôéêü\n"
-"êćöÜëáéï ôïő ćđßóçìïő ïäçăïę śńȚóçò ôïő Mandrake Linux."
+"Ăéá ìéá ëßóôá ìć ôéò äéáèĘóéìćò ćíôïëĘò ăéá ôïí ôńĘśïí ćêôőđùôȚ êÜíôć êëéê "
+"óôï đëȚêôńï \"Ćêôęđùóç ëßóôáò ćíôïëțí\"."
-#: ../../install_messages.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr "http://www.mandrakelinux.com/en/91errata.php3"
+msgid "Enabling servers..."
+msgstr "Ćíćńăïđïßçóç ćîőđçńćôçôțí..."
-#: ../../install_messages.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing test page(s)..."
+msgstr "Ćêôęđùóç äïêéìáóôéêțí óćëßäùí..."
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "There is already a partition with mount point %s\n"
+msgstr "ŐđÜńśćé Țäç êáôÜôìçóç ìć óçìćßï óęíäćóçò %s\n"
+
+#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
+"At this point, you need to decide where you want to install the Mandrake\n"
+"Linux operating system on your hard drive. If your hard drive is empty or\n"
+"if an existing operating system is using all the available space you will\n"
+"have to partition the drive. Basically, partitioning a hard drive consists\n"
+"of logically dividing it to create the space needed to install your new\n"
+"Mandrake Linux system.\n"
"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
+"Because the process of partitioning a hard drive is usually irreversible\n"
+"and can lead to lost data if there is an existing operating system already\n"
+"installed on the drive, partitioning can be intimidating and stressful if\n"
+"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
+"simplifies this process. Before continuing with this step, read through the\n"
+"rest of this section and above all, take your time.\n"
"\n"
+"Depending on your hard drive configuration, several options are available:\n"
"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
"\n"
-" ĐńïóïśȚ\n"
+" Before choosing this option, please understand that after this\n"
+"procedure, the size of your Microsoft Windows partition will be smaller\n"
+"then when you started. You will have less free space under Microsoft\n"
+"Windows to store your data or to install new software.\n"
"\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
"\n"
-" ¶ńíçóç\n"
+" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
+" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
+msgstr ""
"\n"
-" ¶äćéá\n"
+" Linux\n"
"\n"
"\n"
+" íĘï\n"
+" Linux\n"
"\n"
"\n"
"\n"
"\n"
+" śńȚóôçò\n"
"\n"
"\n"
"\n"
"\n"
"\n"
-" ÌćôáöïńÜ\n"
"\n"
"\n"
"\n"
-" Œëá\n"
"\n"
-
-#: ../../install_messages.pm:1
-#, fuzzy, c-format
-msgid ""
-"Introduction\n"
+" áíéśíćęèçêć\n"
+" Linux\n"
"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
+" ćî' ïńéóìïę\n"
"\n"
"\n"
-"1. License Agreement\n"
+" ÔïìĘáò Windows ÔïìĘáò Windows \n"
"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
+" Linux ÄéáăńáöȚ\n"
+" ÔïìĘáò Windows \n"
+" ÔïìĘáò Windows ÁëëáăȚ ìćăĘèïőò\n"
"\n"
+" ÔïìĘáò Windows \n"
"\n"
-"2. Limited Warranty\n"
+" Linux ÔïìĘáò Windows \n"
"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
+" ÔïìĘáò Windows \n"
"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
+" ÔïìĘáò Windows íĘï\n"
"\n"
+" ÄéáăńáöȚ\n"
+" íĘï Linux\n"
"\n"
-"3. The GPL License and Related Licenses\n"
"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
"\n"
"\n"
-"4. Intellectual Property Rights\n"
"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
+" Ëßóôá Áöáßńćóçò ÔïìĘáò Windows \n"
+" Œëá\n"
"\n"
"\n"
-"5. Governing Laws \n"
"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-msgstr ""
"\n"
+" ĐńïóáńìïóìĘíï\n"
"\n"
-" Linux\n"
"\n"
+" Ïëïêëçńțèçêć\n"
"\n"
-" Linux\n"
"\n"
+"."
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Ukraine"
+msgstr "Ïőêńáíßá"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Application:"
+msgstr "ĆöáńìïăȚ:"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "External ISDN modem"
+msgstr "Ćîùôćńéêü ISDN modem"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, report check result by mail."
+msgstr "áí ïńéóôćß íáé, áđïôĘëćóìá áíáöïńÜò ćëĘăśïő ìĘóù ôáśőäńïìćßïő."
+
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Your choice? (default %s) "
+msgstr "Ç ćđéëïăȚ óáò; (ćî ïńéóìïę %s)"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
+msgstr "Ćđßëőóç đńïâëçìÜôùí"
+
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid " / Region"
+msgstr "Ńćïőíéüí"
+
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid ""
+"The classic bug sound tester is to run the following commands:\n"
"\n"
-" ¶äćéá\n"
"\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
"\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
"\n"
-" ¶äćéá\n"
-" ¶äćéá\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
"\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
-" ¶äćéá\n"
-" ¶äćéá ¶äćéá\n"
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+msgstr ""
"\n"
"\n"
"\n"
"\n"
+" ćî' ïńéóìïę\n"
"\n"
"\n"
"\n"
"\n"
+" ćíćńăïđïßçóç\n"
"\n"
"\n"
"\n"
@@ -3578,319 +2293,512 @@ msgstr ""
"\n"
"\n"
"\n"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
"\n"
+msgstr ""
+"Ìßá Ț đćńéóóüôćńćò äïêéìáóôéêĘò óćëßäćò óôÜëèçêáí óôïí ćêôőđùôȚ.\n"
+"Ìđïńćß íá đćńÜóćé êÜđïéïò śńüíïò ìĘśńé ç ćêôęđùóç íá îćêéíȚóćé.\n"
+"ÊáôÜóôáóç ćêôęđùóçò:\n"
+"%s\n"
"\n"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "daily"
+msgstr "êáèçìćńéíÜ"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "and one unknown printer"
+msgstr "êáé Ęíáò Üăíùóôïò ćêôőđùôȚò"
+
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#, c-format
+msgid "Ireland"
+msgstr "Éńëáíäßá"
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "kernel version"
+msgstr "Ęêäïóç đőńȚíá"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid " Restore Configuration "
+msgstr " Ńőèìßóćéò ĆđáíáöïńÜò "
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Is this the correct setting?"
+msgstr "Ćßíáé óùóôȚ ç ńęèìéóç;"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"You will now set up your Internet/network connection. If you wish to\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
"\n"
+"When configuring your network, the available connections options are:\n"
+"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
+"simple LAN connection (Ethernet).\n"
"\n"
+"We will not detail each configuration option - just make sure that you have\n"
+"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
+"from your Internet Service Provider or system administrator.\n"
"\n"
+"You can consult the ``Starter Guide'' chapter about Internet connections\n"
+"for details about the configuration, or simply wait until your system is\n"
+"installed and use the program described there to configure your connection."
+msgstr ""
+"Äéáäßêôőï\n"
+" Äéáäßêôőï Ćđüìćíï\n"
" Linux\n"
"\n"
"\n"
+" ¶êőńï\n"
"\n"
+" Đüôć\n"
"\n"
-" ¶äćéá\n"
-"\n"
-"\n"
-" ĂćíéêÜ\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" ¶äćéá Ôćêìçńßùóç\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Èęńá\n"
-"\n"
-" Œëá\n"
-"\n"
-"\n"
-"\n"
-" Linux\n"
-"\n"
-"\n"
-"\n"
+" áđëü\n"
"\n"
"\n"
+" ćî' ïńéóìïę\n"
+" Äéáäßêôőï\n"
"\n"
+" Äéáäßêôőï\n"
"\n"
-" ¶äćéá Ăáëëßá\n"
-" Œëá\n"
-" Ăáëëßá\n"
-
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "ÂȚìá `%s'\n"
+"."
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Help"
-msgstr "ÂïȚèćéá"
+msgid "Wizard Configuration"
+msgstr "Ńőèìßóćéò Ïäçăïę"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "not configured"
-msgstr "äćí ńőèìßóôçêć"
+msgid "Autoprobe"
+msgstr "Áőôüìáôç ćîĘôáóç"
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configure"
-msgstr "Ńęèìéóç"
+msgid "Backup system files..."
+msgstr "Áíôßăńáöï Áóöáëćßáò óőóôȚìáôïò áńśćßùí..."
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Go on anyway?"
-msgstr "Íá óőíćśßóù;"
+msgid "Can't use broadcast with no NIS domain"
+msgstr "Äćí ìđïńț íá śńçóéìïđïéȚóù broadcast śùńßò ôïìĘá NIS"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "There was an error installing packages:"
-msgstr "ĐńïêëȚèçêć óöÜëìá êáôÜ ôçí ćăêáôÜóôáóç ôùí đáêĘôùí:"
+msgid "Removing printer \"%s\"..."
+msgstr "Ăßíćôáé áöáßńćóç ôïő ćêôőđùôȚ \"%s\"..."
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "There was an error ordering packages:"
-msgstr "ĐńïêëȚèçêć óöÜëìá êáôÜ ôçí ôáîéíüìçóç ôùí đáêĘôùí:"
+msgid "drakfloppy"
+msgstr "drakfloppy"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"Change your Cd-Rom!\n"
+"Please indicate where the auto_install.cfg file is located.\n"
+"\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
-"ÁëëáăȚ Cd-Rom!\n"
+"Đáńáêáëț äçëțóôć ôç èĘóç ôïő áńśćßïő auto_install.cfg file is located.\n"
+"\n"
+"ÁöȚóôć ôï êćíü áí äćí èĘëćôć íá êÜíćôć śńȚóç ôçò áőôüìáôçò ćăêáôÜóôáóçò.\n"
"\n"
-"Đáńáêáëț ćéóÜăćôć ôï Cd-Rom ìć üíïìá \"%s\" óôïí ïäçăü óáò êáé đáôȚóôć "
-"ĆíôÜîćé.\n"
-"ĆÜí äćí ôï Ęśćôć, đáôȚóôć Áêęńùóç ăéá áđïöőăȚ ćăêáôÜóôáóçò áđü áőôü ôï CdRom."
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Refuse"
-msgstr "¶ńíçóç"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "information level that can be obtained through the cpuid instruction"
+msgstr "Ćđßđćäï đëçńïöïńéțí đïő ìđïńïęí íá âńćèïęí ìĘóù ôùí ćíôïëțí cpuid"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
#, c-format
-msgid "Accept"
-msgstr "ÁđïäïśȚ"
+msgid "Peru"
+msgstr "Đćńïę"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Installing package %s"
-msgstr "ĆăêáôÜóôáóç đáêĘôïő %s"
+msgid " on device: %s"
+msgstr "Óôç ÓőóêćőȚ : %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "%d packages"
-msgstr "%d đáêĘôá"
+msgid "Remove Windows(TM)"
+msgstr "Áöáßńćóç Windows(TM)"
-#: ../../install_steps_gtk.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "No details"
-msgstr "Śùńßò ëćđôïìĘńćéćò"
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr ""
+"ÎćêéíÜćé ôçí őđçńćóßá ćîőđçńćôçôȚ ăńáììáôïóćéńțí X (áőôü ćßíáé áđáńáßôçôï "
+"ăéá íá ćêôćëćóôćß ôï XFree)."
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Details"
-msgstr "ËćđôïìĘńćéćò"
+msgid ""
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
+msgstr ""
+"Ïé đćńéóóüôćńćò ôéìĘò Ęśïőí ćîáśèćß \n"
+"áđü ôï óęóôçìÜ óáò\n"
+"ÁëëÜîôć ôéò áí śńćéÜæćôáé."
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Đáńáêáëț đćńéìĘíćôć, đńïćôïéìáóßá ćăêáôÜóôáóçò..."
+msgid "Select the font file or directory and click on 'Add'"
+msgstr ""
+"ĆđéëĘîôć ôï áńśćßï ăńáììáôïóćéńĘò Ț ôïí êáôÜëïăï êáé êÜíôć êëéê óôï "
+"'ĐńïóèȚêç'"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Time remaining "
-msgstr "ĆíáđïìĘíùí śńüíïò "
+msgid "Madagascar"
+msgstr "ÌáäáăáóêÜńç"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Estimating"
-msgstr "Ćêôßìçóç"
+msgid "Urpmi"
+msgstr "Urpmi"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Installing"
-msgstr "ĆăêáôÜóôáóç"
+msgid "Cron not available yet as non-root"
+msgstr "Ôï cron äćí ćßíáé áêüìá äéáèĘóéìç óôïőò ìç-root"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose the packages you want to install"
-msgstr "ĆđéëĘîôć ôá đáêĘôá đïő èĘëćôć íá ćăêáôáóôȚóćôć"
+msgid "System"
+msgstr "Óęóôçìá"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Minimal install"
-msgstr "ĆëÜśéóôç ĆăêáôÜóôáóç"
+msgid "Do you want to use this feature?"
+msgstr "ÈĘëćôć íá śńçóéìïđïéȚóćôć áőôȚ ôç ëćéôïőńăßá;"
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Updating package selection"
-msgstr "ÁíáíĘùóç ćđéëćăìĘíùí đáêĘôùí"
+msgid "Arabic"
+msgstr "Áńáâéêü"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Load/Save on floppy"
-msgstr "Öüńôùóç/ÁđïèȚêćőóç óć äéóêĘôá"
+msgid ""
+"\n"
+"- Options:\n"
+msgstr ""
+"\n"
+"- ĆđéëïăĘò:\n"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "<- Previous"
-msgstr "<- Đńïçăïęìćíï"
+msgid "Password required"
+msgstr "Áđáéôćßôáé êùäéêüò đńüóâáóçò"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Install"
-msgstr "ĆăêáôÜóôáóç"
+msgid "%d minutes"
+msgstr "%d ëćđôÜ"
-#: ../../install_steps_gtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Show automatically selected packages"
-msgstr "Áőôüìáôç đńïâïëȚ ćđéëćăìĘíùí đáêĘôùí"
+msgid "Graphics card: %s"
+msgstr "ÊÜńôá ăńáöéêțí: %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Äćí ìđïńćßôć íá áđïćđéëĘîćôć áőôü ôï đáêĘôï. ĐńĘđćé íá áíáâáèìéóôćß"
+msgid "WebDAV transfer failed!"
+msgstr "Ç ìćôáöïńÜ WebDAV áđĘôőść!"
-#: ../../install_steps_gtk.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Áőôü ôï đáêĘôï đńĘđćé íá áíáâáèìéóôćß\n"
-"Ćßóôć óßăïőńïò üôé èĘëćôć íá ôï áđïćđéëĘîćôć;"
+msgid "XFree configuration"
+msgstr "Ńőèìßóćéò XFree"
-#: ../../install_steps_gtk.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "Äćí ìđïńćßôć íá áđïćđéëĘîćôć áőôü ôï đáêĘôï. Ćßíáé Țäç ćăêáôćóôçìĘíï"
+msgid "Choose action"
+msgstr "ĆđéëĘîôć đńÜîç"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Áőôü ćßíáé áđáéôïęìćíï đáêĘôï, äćí ìđïńćß íá áđïćđéëćăćß"
+msgid "French Polynesia"
+msgstr "ĂáëëéêȚ Đïëőíçóßá"
-#: ../../install_steps_gtk.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
+msgstr ""
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" óćéńéáêü\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" ćî' ïńéóìïę\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" Ìć ńïäÜêé áíéśíćęèçêć\n"
+"\n"
+"\n"
+" Ćđüìćíï\n"
+" ćíćńăïđïßçóç ôțńá\n"
+"\n"
+"\n"
+"."
+
+#: ../../services.pm:1
#, c-format
-msgid "You can't select/unselect this package"
-msgstr "Äćí ìđïńćßôć íá ćđéëĘîćôć/áđïćđéëĘîćôć áőôü ôï đáêĘôï"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "ŐđïóôȚńéîç ôùí OKI 4w êáé óőìâáôțí winprinters."
-#: ../../install_steps_gtk.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "The following packages are going to be removed"
-msgstr "Èá áöáéńćèïęí ôá đáńáêÜôù đáêĘôá "
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr "Ćêêßíçóç ôïő ALSA (Advanced Linux Sound Architecture) óőóôȚìáôïò Țśïő"
-#: ../../install_steps_gtk.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "The following packages are going to be installed"
-msgstr "Èá ćăêáôáóôáèïęí ôá đáńáêÜôù đáêĘôá"
+msgid "Installing driver for %s card %s"
+msgstr "ĆăêáôÜóôáóç ïäçăïę ăéá %s êÜńôá %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You can't select this package as there is not enough space left to install it"
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
msgstr ""
-"Äćí ìđïńćßôć íá ćđéëĘîćôć áőôü ôï đáêĘôï äéüôé äćí őđÜńśćé áńêćôüò śțńïò"
+"'žśćôć ìćôáöĘńćé ôïí đńțçí đńïćđéëćăìĘíï ćêôőđùôȚò óáò (\"%s\"), Íá ćßíáé ï "
+"đńïćđéëćăìĘíïò ćêôőđùôȚò êáé óôï íĘï íĘï óęóôçìá ćêôęđùóçò %s;"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Importance: %s\n"
-msgstr "Óđïőäáéüôçôá: %s\n"
+msgid "Enable Server"
+msgstr "Ćíćńăïđïßçóç ĆîőđçńćôçôȚ"
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Size: %d KB\n"
-msgstr "ÌĘăćèïò: %d KB\n"
+msgid "Ukrainian"
+msgstr "Ïőêńáíéêü"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Version: %s\n"
-msgstr "žêäïóç: %s\n"
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
+msgstr ""
+"Ç đńüóâáóç äéêôęïő äćí ćêôćëćßôï êáé äćí ìđüńćóć íá ćêêéíçèćß. Đáńáêáëț "
+"ćëĘăîôć ôçí ńęèìéóç ôïő őëéêïę óáò. ÌćôÜ đńïóđáèȚóôć íá ńőèìßóćôć ôïí "
+"áđïìáêńőóìĘíï ćêôőđùôȚ óáò."
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Name: %s\n"
-msgstr "Œíïìá: %s\n"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "Đáńáêáëț ćéóÜăćôć ôç äéóêĘôá Ćêêßíçóçò óôïí ïäçăü %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Bad package"
-msgstr "ËÜèïò đáêĘôï"
+msgid "Local network(s)"
+msgstr "Ôïđéêü Äßêôőï(á)"
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
-#, c-format
-msgid "Other"
-msgstr "¶ëëï"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
+msgstr "Áöáßńćóç Windows(TM)"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Óőíïëéêü ìĘăćèïò: %d / %d MB"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr ""
+"Ôï %s óáò Ęśćé ńőèìéóôćß. \n"
+"Ìđïńćßôć ôțńá íá óáńțóćôć Ęăăńáöá ìć ôï \"XSane\" áđü ôï ĐïëőìĘóá/ĂńáöéêÜ "
+"áđü ìćíïę ćöáńìïățí."
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Next ->"
-msgstr "Ćđüìćíï -»"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Firewire controllers"
+msgstr "ĆëćăêôĘò USB"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Individual package selection"
-msgstr "ĆđéëïăȚ îćśùńéóôțí đáêĘôùí"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
+"\n"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
+msgstr ""
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" ĐńïóèȚêç íĘï\n"
+" Ôńïđïđïßçóç Ëßóôá Áöáßńćóçò ĆíôÜîćé\n"
+"\n"
+"\n"
+"\n"
+" ÄéáăńáöȚ\n"
+"\n"
+"\n"
+"!"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Package Group Selection"
-msgstr "ĆđéëïăȚ ÏìÜäùí ĐáêĘôùí"
+msgid "System mode"
+msgstr "ÊáôÜóôáóç óőóôȚìáôïò"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
msgstr ""
-"Ôï óęóôçìÜ óáò äćí Ęśćé áńêćôïęò đüńïőò. Ìđïńćß íá áíôéìćôùđßóćôć "
-"đńïâëȚìáôá\n"
-"óôçí ćăêáôÜóôáóç ôïő Mandrake Linux. ĆÜí óőìâćß áőôü, ìđïńćßôć íá äïêéìÜóćôć "
-"ćăêáôÜóôáóç êćéìĘíïő.\n"
-"ĐáôȚóôć F1 êáôÜ ôçí ćêêßíçóç áđü CDROM, ìćôÜ ăńÜűôć `text'."
+"Ăéá íá ćêôőđțóćôć óć Ęíáí ćêôőđùôȚ NetWare, đńĘđćé íá äțóćôć ôï üíïìá ôïő "
+"ćîőđçńćôçôȚ ćêôőđțóćùí NetWare (Óçìćßùóç! Ìđïńćß íá ćßíáé äéáöïńćôéêü áđü ôï "
+"äéêôőáêü üíïìá TCP/IP!), ôï üíïìá ôïő ćêôőđùôȚ óôïí ïđïßï ćđéèőìćßôć "
+"đńüóâáóç, êáèțò êáé\n"
+"ïđïéáäȚđïôć áđáńáßôçôç đëçńïöïńßá đćńß śńȚóôç êáé êùäéêïę đńüóâáóçò."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Save packages selection"
-msgstr "ÁđïèȚêćőóç ćđéëïăȚò đáêĘôùí"
+msgid "Netmask:"
+msgstr "ÌÜóêá äéêôęïő:"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Automated"
-msgstr "Áőôüìáôï"
+msgid "Append"
+msgstr "ĐńïóÜńôçóç"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Replay"
-msgstr "Ćđáíáöüńôùóç"
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr ""
+"ÁíáíĘùóç ëßóôáò ćêôőđùôțí ( ăéá íá ćìöáíßóćé üëïőò ôïőò äéáèĘóéìïőò "
+"áđïìáêńőóìĘíïőò ćêôőđùôĘò)"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
+"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
+"\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
+"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
+"\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
+msgstr ""
+"Đüôć CUPS\n"
+"\n"
+" LPD LPRng CUPS\n"
+"\n"
+"\n"
+"\n"
+" ćîőđçńćôçôȚò\n"
+"\n"
+"."
+
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid ""
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
+"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
+"\n"
+"It also provides a much higher API than OSS.\n"
+"\n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
+msgstr ""
+"Óęóôçìá\n"
+" Ôé\n"
+"\n"
+" Ăéá ĐńïśùńçìĘíïőò Linux\n"
+" PCI\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" íĘï"
#: ../../install_steps_interactive.pm:1
#, c-format
@@ -3907,3289 +2815,3869 @@ msgstr ""
"\n"
"Ìđïńćß íá đńïôéìÜôć íá ćđáíáëÜâćôć ôçí ćăêáôÜóôáóç.\n"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Generate auto install floppy"
-msgstr "Äçìéïőńăßá äéóêĘôáò áőôüìáôçò ćăêáôÜóôáóçò"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Reboot"
-msgstr "Ćđáíćêêßíçóç"
+msgid "Network printer \"%s\", port %s"
+msgstr "ĆêôőđùôȚò äéêôęïő \"%s\", èęńá %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
msgstr ""
-"ÌćńéêÜ âȚìáôá äćí ïëïêëçńțèçêáí.\n"
-"\n"
-"ÈĘëćôć óßăïőńá íá ćăêáôáëćßűćôć ôțńá;"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Creating auto install floppy..."
-msgstr "Äçìéïőńăßá äéóêĘôáò áőôüìáôçò ćăêáôÜóôáóçò..."
+"Đáńáêáëț ćđéëĘîôć ôé đńïóáńìïăĘáò äéêôęïő èá óőíäćèćß óôï ôïđéêü óáò äßêôőï."
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "ĆéóÜăćôć Üäćéá äéóêĘôá óôïí ïäçăü %s"
+msgid "OK to restore the other files."
+msgstr "ĆíôÜîćé ăéá ôçí ćđáíáöïńÜ ôùí Üëëùí áńśćßùí."
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Ìđïńćß íá śńćéáóôćß íá áëëÜîćôć ôçí Open Firmware boot-óőóêćőȚ țóôć íá\n"
-" ćíćńăïđïéȚóćôć ôï đńüăńáììá ćêêßíçóçò. Áí óôçí ćđáíćêêßíçóç äćí äćßôć ôçí "
-"đńïôńïđȚ ôïő đńüăńáììá ćêêßíçóçò,\n"
-"đáôȚóôć ôï Command-Option-O-F êáôÜ ôçí ćđáíćêêßíçóç êáé ćéóÜăćôć:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" ÌćôÜ ăńÜűôć: shut-down\n"
-"Óôçí ćđüìćíç ćêêßíçóç èá đńĘđćé íá äćßôć ôçí đńïôńïđȚ ôïő đńïăńÜììáôïò "
-"ćêêßíçóçò ."
+msgid "Please choose your keyboard layout."
+msgstr "Đáńáêáëț ćđéëĘîôć ôçí äéÜôáîç đëçêôńïëïăßïő."
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"Ç ćăêáôÜóôáóç ôïő đńïăńÜììáôïò ćêêßíçóçò áđĘôőść. ĐńïêëȚèçêć ôï áêüëïőèï "
-"óöÜëìá:"
+msgid "Printer Device URI"
+msgstr "ÓőóêćőȚ ćêôőđùôȚ URI"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Installing bootloader"
-msgstr "Đńüăńáììá ćêêßíçóçò"
+msgid "Not erasable media!"
+msgstr "Ôï ìĘóï äćí ìđïńćß íá óâçóôćß!"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"ÓöÜëìá êáôÜ ôçí ćăêáôÜóôáóç ôïő aboot, \n"
-"đńïóđÜèćéá âćâéáóìĘíçò ćăêáôÜóôáóçò, áêüìá êáé áí áőôü Ęśćé óáí áđïôĘëćóìá "
-"ôçí êáôáóôńïöȚ ôçò đńțôçò êáôÜôìçóçò;"
+msgid "Terminal-based"
+msgstr "ŚńȚóç ôćńìáôéêïę"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do you want to use aboot?"
-msgstr "ÈĘëćôć íá śńçóéìïđïéȚóćôć ôï aboot;"
+msgid "Installing a printing system in the %s security level"
+msgstr "ĆăêáôÜóôáóç óőóôȚìáôïò ćêôęđùóçò óôï ćđßđćäï áóöÜëćéáò %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
-msgstr ""
-"Öáßíćôáé đùò Ęśćôć Ęíá Áńśáßï Ț ¶ăíùóôï\n"
-"ìçśÜíçìá, ï yaboot bootloader äćí èá äïőëĘűćé ăéá óáò.\n"
-"Ç ćăêáôÜóôáóç èá óőíćśéóôćß, áëëÜ\n"
-"èá śńćéáóôćß íá śńçóéìïđïéȚóćôć ôï BootX ăéá íá îćêéíȚóćôć ôï ìçśÜíçìÜ óáò"
+msgid "The user name is too long"
+msgstr "Áőôü ôï üíïìá śńȚóôç ćßíáé đïëę ìáêńę"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Preparing bootloader..."
-msgstr "Đńïćôïéìáóßá đńïăńÜììáôïò ćêêßíçóçò..."
+msgid "Other OS (windows...)"
+msgstr "¶ëëï ëćéôïőńăéêü (windows...)"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Domain Admin Password"
-msgstr "Êùäéêüò Đńüóâáóçò ÄéáśćéńéóôȚ ÔïìĘá"
+msgid "WebDAV remote site already in sync!"
+msgstr "Ôï áđïìáêńőóìĘíï WebDAV ćßíáé Țäç óć óőăśńïíéóìü!"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Domain Admin User Name"
-msgstr "Œíïìá ŚńȚóôç ÄéáśćéńéóôȚ ÔïìĘá"
+msgid "Reading printer database..."
+msgstr "ÁíÜăíùóç âÜóçò äćäïìĘíùí ćêôőđùôțí..."
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Windows Domain"
-msgstr "ÔïìĘáò Windows "
+msgid "Generate auto install floppy"
+msgstr "Äçìéïőńăßá äéóêĘôáò áőôüìáôçò ćăêáôÜóôáóçò"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Authentication Windows Domain"
-msgstr "Đéóôïđïßçóç ÔïìĘá Windows"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
msgstr ""
-"ÔïìĘáò Windows ćîőđçńćôçôȚò\n"
-" ÔïìĘáò ÔïìĘáò Windows \n"
-"\n"
-" ÔïìĘáò Windows ÔïìĘáò Œíïìá śńȚóôç Êùäéêüò Đńüóâáóçò\n"
-"."
+"\t\t üíïìá śńȚóôç: %s\n"
+"\t\t óôç èĘóç: %s \n"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "NIS Server"
-msgstr "ĆîőđçńćôçôȚò NIS"
+msgid "Somalia"
+msgstr "Óïìáëßá"
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "NIS Domain"
-msgstr "ÔïìĘáò NIS"
+msgid "No open source driver"
+msgstr "ÊáíĘíáò ïäçăüò áíïéśôïę êțäéêá"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Authentication NIS"
-msgstr "Đéóôïđïßçóç NIS"
+msgid ""
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
+msgstr ""
+"Ç áóöÜëćéá ćßíáé ßäéá ôïő đńïçăïęìćíïő ćđéđĘäïő, ìć ôï óęóôçìá ôćëćßùò "
+"êëćéóôü. Ç áóöÜëćéá ćßíáé óôï ìĘăéóôï äőíáôü."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "NIS"
-msgstr "NIS"
+msgid "Nicaragua"
+msgstr "ÍéêáńÜăïőá"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LDAP Server"
-msgstr "ĆîőđçńćôçôȚò LDAP"
+msgid "New Caledonia"
+msgstr "ÍĘá Êáëçäïíßá"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
+msgid "European protocol (EDSS1)"
+msgstr "Ćőńùđáúêü Đńùôüêïëëï (EDSS1)"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Authentication LDAP"
-msgstr "Đéóôïđïßçóç LDAP"
+msgid "Video mode"
+msgstr "ÁíÜëőóç ïèüíçò"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "LDAP"
-msgstr "LDAP"
+msgid "Please enter your email address below "
+msgstr "Đáńáêáëț ćéóÜăćôć ôçí çëćêôńïíéêȚ óáò äéćęèőíóç"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Local files"
-msgstr "ÔïđéêÜ áńśćßá"
+msgid "Oman"
+msgstr "ÏìÜí"
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Authentication"
-msgstr "Đéóôïđïßçóç"
+msgid "Network Monitoring"
+msgstr "Đáńáêïëïęèçóç Äéêôęïő"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr ""
-"Áőôüò ï êùäéêüò đńüóâáóçò ćßíáé đïëę áđëüò (đńĘđćé íá Ęśćé ôïőëÜśéóôïí %d "
-"śáńáêôȚńćò)"
+msgid "SunOS"
+msgstr "SunOS"
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No password"
-msgstr "Śùńßò êùäéêü đńüóâáóçò"
+msgid "New size in MB: "
+msgstr "ÍĘï ìĘăćèïò óć MB:"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Set root password"
-msgstr "Êùäéêüò đńüóâáóçò root"
+msgid "Partition table type: %s\n"
+msgstr "Ôęđïò đßíáêá êáôáôìȚóćùí: %s\n"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr "Äćí Ęśćôć ńőèìßóćé ôï Ś. Ćßóôć âĘâáéïé üôé èĘëćôć íá ôï êÜíćôć;"
-
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Őđçńćóßćò: %d ćíćńăïđïéçìĘíćò ăéá %d ćăăćăńáììĘíćò"
-
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#, c-format
-msgid "Services"
-msgstr "Őđçńćóßćò"
+msgid "Authentication Windows Domain"
+msgstr "Đéóôïđïßçóç ÔïìĘá Windows"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "System"
-msgstr "Óęóôçìá"
+msgid "US keyboard"
+msgstr "Ç.Đ.Á. (US)"
-#. -PO: example: lilo-graphic on /dev/hda1
#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "%s on %s"
-msgstr "%s (Èęńá %s)"
+#, c-format
+msgid "Buttons emulation"
+msgstr "Đńïóïìïßùóç Êïőìđéțí"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Bootloader"
-msgstr "ĐńïăńÜììáôïò ćêêßíçóçò"
+msgid ", network printer \"%s\", port %s"
+msgstr ", ćêôőđùôȚò äéêôęïő \"%s\", èęńá %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Boot"
-msgstr "Ćêêßíçóç"
+msgid ""
+"\n"
+"Drakbackup activities via tape:\n"
+"\n"
+msgstr ""
+"\n"
+"Äńáóôçńéüôçôćò Drakbackup ìĘóù ôáéíßáò:\n"
+"\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "disabled"
-msgstr "áđćíćńăïđïéçìĘíï"
+msgid ""
+"\n"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
+msgstr ""
+"\n"
+" ÓöÜëìá óôç óęíäćóç FTP . Äćí Țôáí äőíáôȚ ç áđïóôïëȚ ôùí áíôéăńÜöùí "
+"áóöáëćßáò ìĘóù FTP.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "activated"
-msgstr "ćíćńăïđïéçìĘíï"
+msgid "Sending Speed:"
+msgstr "Ôáśęôçôá ÁđïóôïëȚò:"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Firewall"
-msgstr "Ôïßśïò Đńïóôáóßáò"
+msgid "Halt bug"
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Security"
-msgstr "ÁóöÜëćéá"
+msgid "Mail alert configuration"
+msgstr "Ńęèìéóç ćéäïđïßçóçò Ôáśőäńïìćßïő"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Security Level"
-msgstr "Ćđßđćäï Áóöáëćßáò"
+msgid "Tokelau"
+msgstr "ÔïêćëÜïő"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Network"
-msgstr "Äßêôőï"
+msgid "Bosnian"
+msgstr "Âïóíßáò"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Network & Internet"
-msgstr "Äßêôőï & Äéáäßêôőï"
+msgid "Release: "
+msgstr "žêäïóç:"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Graphical interface"
-msgstr "Ăńáöéêü đćńéâÜëëïí"
+msgid "Connection speed"
+msgstr "Ôáśęôçôá óęíäćóçò"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hardware"
-msgstr "Őëéêü"
+msgid ""
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
+msgstr ""
+"Đáńáêáëț ćéóÜăćôć ôï üíïìá ôçò óőóêćőȚò ćăăńáöȚò CD\n"
+"đ.ś. : 0,1,0"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "TV card"
-msgstr "ÊÜńôá TV"
+msgid "Namibia"
+msgstr "Íáìßìđéá"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"Äćí âńĘèçêć êÜńôá Țśïő. ÄïêéìÜóôć ôï \"harddrake\" ìćôÜ ôçí ćăêáôÜóôáóç"
+msgid "Database Server"
+msgstr "ĆîőđçńćôçôȚò ÂÜóçò ÄćäïìĘíùí"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgid "special capacities of the driver (burning ability and or DVD support)"
msgstr ""
-"ĆêôćëĘóôć \"sndconfig\" ìćôÜ ôçí ćăêáôÜóôáóç ăéá ôçí ńęèìéóç ôçò êÜńôáò"
-#: ../../install_steps_interactive.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "žśćôć êÜńôá Țśïő ISA;"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "Äćí ìđïńț íá đńïóèĘóù êáôÜôìçóç óôï _ìïńöïđïéçìĘíï_ RAID md%d"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Sound card"
-msgstr "ÊÜńôá Țśïő"
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
+msgstr ""
+"Ç êÜńôá ăńáöéêțí óáò őđïóôçńßæćé ćđéôÜśőíóç ôńéóäéÜóôáôùí ăńáöéêțí ìüíï ìć "
+"ôá XFree %s.\n"
+"ĐŃÏÓÏŚÇ: ĐĆÉŃÁÌÁÔÉÊÇ ŐĐÏÓÔÇŃÉÎÇ - ÌĐÏŃĆÉ ÍÁ ĐÁĂÙÓĆÉ ÔÏÍ ŐĐÏËÏĂÉÓÔÇ ÓÁÓ!\n"
+"Ç êÜńôá óáò őđïóôçńßæćôáé áđü ôá XFree %s ôá ïđïßá ìđïńćß íá äßíïőí êáëęôćńç "
+"őđïóôȚńéîç ăéá äéäéÜóôáôá ăńáöéêÜ"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Remote CUPS server"
-msgstr "ÁđïìáêńőóìĘíïò ćîőđçńćôçôȚò CUPS"
+msgid "Please wait, setting security options..."
+msgstr "Đáńáêáëț đćńéìĘíćôć, ïńßæïíôáé ïé ćđéëïăĘò áóöáëćßáò..."
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "No printer"
-msgstr "ÊáíĘíáò ćêôőđùôȚò"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr "¶ăíùóôï|CPH05X (bt878) [đïëëïß êáôáóêćőáóôĘò]"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Printer"
-msgstr "ĆêôőđùôȚò"
+msgid "Launch the graphical environment when your system starts"
+msgstr "Ëćéôïőńăßá ăńáöéêïę đćńéâÜëëïíôïò êáôÜ ôçí ćêêßíçóç ôïő óőóôȚìáôïò"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mouse"
-msgstr "Đïíôßêé"
+msgid "hourly"
+msgstr "ùńéáßá"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Timezone"
-msgstr "ÙńïëïăéáêȚ Æțíç"
+msgid " Successfuly Restored on %s "
+msgstr " Áíáêôçèćß ìć ćđéôőśßá óôï %s "
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Keyboard"
-msgstr "Đëçêôńïëüăéï"
+msgid "Making printer port available for CUPS..."
+msgstr "Ăßíïíôáé äéáèĘóéìćò ïé èęńćò óôï CUPS..."
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Summary"
-msgstr "Đćńßëçűç"
+msgid "Antigua and Barbuda"
+msgstr "Áíôßăêïőá êáé Ìđáńìđïęíôá"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NTP Server"
-msgstr "ĆîőđçńćôçôȚò NTP"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid ""
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
+msgstr ""
+"\n"
+" ĆîőđçńćôçôȚò\n"
+" ÄéáăńáöȚ śńȚóôçò ĆîőđçńćôçôȚò ćíćńăïđïßçóç."
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Áőôüìáôïò óőăśńïíéóìüò țńáò (śńȚóç NTP)"
+msgid "Spanish"
+msgstr "Éóđáíéêü"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Ôï ńïëüé ôïő őđïëïăéóôȚ óáò ćßíáé ńőèìéóìĘíï óć GMT (țńá Ăêńßíïőéôò)"
+msgid "Start"
+msgstr "Ćêêßíçóç"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Which is your timezone?"
-msgstr "Đïéá ćßíáé ç æțíç țńáò;"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Would you like to try again?"
-msgstr "Èá èĘëáôć íá ńőèìßóćôć Ęíáí ćêôőđùôȚ;"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Áäőíáìßá fork: %s"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Óęíäćóç ìć ôïí ôüđï ăéá ôçí ëȚűç ôùí äéáèĘóéìùí đáêĘôùí..."
+msgid "Configuring applications..."
+msgstr "Ńęèìéóç ćöáńìïățí..."
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "ĆđéëĘîôć ôüđï áđü ôïí ïđïßï èá ăßíćé ç ëȚűç đáêĘôùí"
+msgid "Normal modem connection"
+msgstr "ÁđëȚ óęíäćóç ìć ìüíôćì"
-# fuzzy
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr ""
-"Óęíäćóç ìć ôçí ôïđïèćóßá ôçò Mandrake Linux ăéá ëȚűç ôùí äéáèĘóéìùí ôüđùí "
-"ëȚűçò..."
+msgid "File Selection"
+msgstr "ĆđéëïăȚ Áńśćßïő"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
+"Which ISDN configuration do you prefer?\n"
"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+" tools, but is tricky to configure, and not standard.\n"
"\n"
-"Do you want to install the updates ?"
+"* The New configuration is easier to understand, more\n"
+" standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
msgstr ""
-"Ôțńá Ęśćôć ôç äőíáôüôçôá íá ćăêáôáóôȚóćôć đáêĘôá áíáâÜèìéóçò. ÁőôÜ ôá\n"
-"đáêĘôá Ęśïőí áíáâáèìéóôćß ìćôÜ ôçí Ęêäïóç ôçò äéáíïìȚò. Ìđïńćß íá đćńéĘśïőí\n"
-"äéïńèțóćéò óöáëìÜôùí Ț áíáâáèìßóćéò áóöÜëćéáò.\n"
+"Đïéá ISDN ńęèìéóç đńïôéìÜôć;\n"
"\n"
-"Ăéá íá êÜíćôć ëȚűç áőôțí ôùí đáêĘôùí đńĘđćé íá Ęśćôć ìéá óęíäćóç óôï "
-"Äéáäßêôőï\n"
-"đïő íá ëćéôïőńăćß.\n"
+"* Ç đáëéÜ ńęèìéóç śńçóéìïđïéćß ôï isdn4net. ĐćńéĘśćé śńȚóéìá ćńăáëćßá,\n"
+" áëëÜ ćßíáé ëßăï äęóêïëï ăéá Ęíáí áńśÜńéï íá ńőèìéóôćß êáé üśé óôćńćüôőđï.\n"
+"\n"
+"* Ç ÍĘá ńęèìéóç ćßíáé ćőêïëüôćńç óôçí êáôáíüçóç, đćńéóóüôćńï óôćńćüôőđç,\n"
+" áëëÜ ìć ëéăüôćńá ćńăáëćßá.\n"
+"\n"
+"Đńïôćßíïőìć ôçí ćëáöńéÜ ńęèìéóç.\n"
"\n"
-"ÈĘëćôć íá ćăêáôáóôȚóćôć ôéò áíáâáèìßóćéò ;"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Đáńáêáëț ćéóÜăćôć ôç äéóêĘôá ÁíáâÜèìéóçò ÁńèńùìÜôùí óôïí ïäçăü %s"
+msgid "CUPS"
+msgstr "CUPS"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Đáńáêáëț ćéóÜăćôć ôç äéóêĘôá Ćêêßíçóçò óôïí ïäçăü %s"
+msgid "Run config tool"
+msgstr "ĆêôĘëćóç ćńăáëćßï ńęèìéóçò"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Post-install configuration"
-msgstr "Ńőèìßóćéò ìćôÜ ôçí ćăêáôÜóôáóç"
+msgid "Bootloader installation"
+msgstr "Đńüăńáììá ćêêßíçóçò"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"ĆăêáôÜóôáóç đáêĘôïő %s\n"
-"%d%%"
+msgid "Root partition size in MB: "
+msgstr "ÌĘăćèïò âáóéêȚò êáôÜôìçóçò óőóôȚìáôïò óć MB:"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Preparing installation"
-msgstr "Đńïćôïéìáóßá ćăêáôÜóôáóçò"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "Áőôü ćßíáé áđáéôïęìćíï đáêĘôï, äćí ìđïńćß íá áđïćđéëćăćß"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom ïíüìáôé \"%s\""
+msgid "Etherboot ISO image is %s"
+msgstr "Ç ćéêüíá Etherboot ISO ćßíáé ç %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
msgstr ""
-"ĆÜí Ęśćôć üëá ôá đáńáêÜôù CDs, đáôȚóôć ĆíôÜîćé.\n"
-"ĆÜí äćí Ęśćôć êáíĘíá áđü ôá đáńáêÜôù CDs, đáôȚóôć Áêęńùóç.\n"
-"ĆÜí äćí Ęśćôć êÜđïéá áđü áőôÜ, áđïćđéëĘîôć ôá êáé đáôȚóôć ĆíôÜîćé."
-
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
-#, c-format
-msgid "All"
-msgstr "Œëá"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "ĐńáăìáôéêÜ ćëÜśéóôç ćăêáôÜóôáóç (ćéäéêÜ śùńßò urpmi)"
+"Ï named (BIND) ćßíáé Ęíáò ĆîőđçńćôçôȚò Ïíüìáôïò ÔïìĘá (DNS) đïő "
+"śńçóéìïđïéćßôáé\n"
+"ăéá íá ìćôáôńĘđćé ïíüìáôá óć äéćőèęíóćéò IP."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Ìć ôçí âáóéêȚ ôćêìçńßùóç (óőíéóôÜôáé!)"
+msgid "Disconnect..."
+msgstr "Áđïóęíäćóç..."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "With X"
-msgstr "Ìć Ś"
+msgid "Saint Lucia"
+msgstr "¶ăéïò ËïőêÜò"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Äćí Ęśćôć ćđéëĘîćé ïìÜäá đáêĘôùí.\n"
-"Đáńáêáëț ćđéëĘîôć ôçí ćëÜśéóôç ćăêáôÜóôáóç đïő èĘëćôć:"
+msgid "Report"
+msgstr "ÁíáöïńÜ"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Type of install"
-msgstr "Ôęđïò ćăêáôÜóôáóçò"
+msgid "Palau"
+msgstr "ĐáëÜïő"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Selected size is larger than available space"
-msgstr "Ôï ćđéëćăìĘíï ìĘăćèïò ćßíáé ìćăáëęôćńï áđü ôï äéáèĘóéìï śțńï"
+msgid "level"
+msgstr "ćđßđćäï"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "ĆéóÜăćôć äéóêĘôá đïő đćńéĘśćé ôçí ćđéëïăȚ đáêĘôùí"
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#, fuzzy, c-format
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
+msgstr "Œëá."
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Loading from floppy"
-msgstr "Öïńôțíćôáé áđü äéóêĘôá"
+msgid "Package Group Selection"
+msgstr "ĆđéëïăȚ ÏìÜäùí ĐáêĘôùí"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Package selection"
-msgstr "ĆđéëïăȚ đáêĘôùí"
+msgid "Restore Via Network Protocol: %s"
+msgstr "ĆđáíáöïńÜ ÌĘóù Đńùôüêïëëï Äéêôęïő: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Save on floppy"
-msgstr "ÁđïèȚêćőóç óć äéóêĘôá"
+msgid "You can configure each parameter of the module here."
+msgstr "Ćäț ìđïńćßôć íá ńőèìßóćôć ôéò đáńáìĘôńïőò ôïő áńèńțìáôïò."
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Load from floppy"
-msgstr "Öüńôùóç áđü äéóêĘôá"
+msgid "Choose the resolution and the color depth"
+msgstr "ĆđéëĘîôć áíÜëőóç êáé âÜèïò śńțìáôïò"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Đáńáêáëț ćđéëĘîôć ôç öüńôùóç Ț áđïèȚêćőóç ôùí ćđéëïăȚò đáêĘôùí óôç äéóêĘôá.\n"
-"Ç ìïńöïđïßçóç ćßíáé ç ßäéá ìć ôéò äéóêĘôćò áőôüìáôçò ćăêáôÜóôáóçò."
+msgid "Emulate third button?"
+msgstr "Ćîïìïßùóç ôńßôïő đëȚêôńïő;"
-#: ../../install_steps_interactive.pm:1
-#, c-format
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
msgstr ""
-"Äćí ćđĘìćéíć áńêćôüò śțńïò óôï óęóôçìÜ óáò ăéá ćăêáôÜóôáóç Ț áíáâÜèìéóç (%d "
-"> %d)"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Looking for available packages..."
-msgstr "ŰÜśíù ăéá äéáèĘóéìá đáêĘôá..."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "ÁíáæȚôçóç đáêĘôùí đńïò áíáâÜèìéóç..."
+"íĘï\n"
+" đńùôćęïőóá\n"
+" đńùôćęïőóá."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Looking at packages already installed..."
-msgstr "ŰÜśíù ăéá Țäç ćăêáôćóôçìĘíá đáêĘôá..."
+msgid "Mount"
+msgstr "Óęíäćóç"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "ŰÜśíù ăéá äéáèĘóéìá đáêĘôá êáé äçìéïőńăț îáíÜ ôç âÜóç äćäïìĘíùí rpm..."
+msgid "Creating auto install floppy"
+msgstr "Äçìéïőńăßá äéóêĘôáò áőôüìáôçò ćăêáôÜóôáóçò"
-#: ../../install_steps_interactive.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr ""
-"Äćí őđÜńśćé áńêćôüò śțńïò swap ăéá ôçí ïëïêëȚńùóç ôçò ćăêáôÜóôáóçò, đáńáêáëț "
-"đńïóèĘóôć"
+msgid "Install updates"
+msgstr "Áíáâáèìßóćéò"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
-msgstr ""
-"ÁđĘôőść ï Ęëćăśïò ôïő óőóôȚìáôïò áńśćßùí %s. ÈĘëćôć íá ćđéóêćőÜóćôć ôá "
-"óöÜëìáôá; (đńïóïśȚ, ìđïńćß íá śÜóćôć äćäïìĘíá)"
+msgid "text box height"
+msgstr "ęűïò đëáéóßïő êćéìĘíïő"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Check bad blocks?"
-msgstr "žëćăśïò ăéá śáëáóìĘíá ôìȚìáôá;"
+msgid "State"
+msgstr "ÊáôÜóôáóç:"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "ĆđéëĘîôć êáôáôìȚóćéò đńïò ìïńöïđïßçóç"
+msgid "Be sure a media is present for the device %s"
+msgstr "Óéăïőńćőôćßôć đùò Ęíá ìĘóï ćßíáé đáńüí ăéá ôç óőóêćőȚ %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Áđáéôćßôáé ćđáíćêêßíçóç ăéá íá ćíćńăïđïéçèïęí ïé áëëáăĘò óôïí đßíáêá "
-"êáôáôìȚóćùí"
+msgid "Enable multiple profiles"
+msgstr "Ćíćńăïđïßçóç đïëëáđëțí đńïößë"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+"These options can backup and restore all files in your /etc directory.\n"
msgstr ""
-"Äćí őđÜńśćé ćëćęèćńïò śțńïò ăéá 1MB bootstrap! Ç ćăêáôÜóôáóç èá óőíćśéóôćß, "
-"áëëÜ ăéá íá îćêéíȚóćôć ôï óęóôçìÜ óáò, èá śńćéáóôćß íá äçìéïőńăȚóćôć ìéá "
-"êáôÜôìçóç bootstrap ìć ôï DiskDrake"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Choose the mount points"
-msgstr "ĆđéëĘîôć óçìćßá óęíäćóçò"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "ÁíÜëőóç êáôáôìȚóćùí ăéá đńïóäéïńéóìü óçìćßùí óęíäćóçò."
+"ÁőôĘò ïé ćđéëïăĘò ìđïńïęí íá đÜńïőí áíôßăńáöá áóöáëćßáò êáé íá ćđáíáöĘńïőí "
+"ôï /etc\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "No partition available"
-msgstr "äćí őđÜńśïőí äéáèĘóéìćò êáôáôìȚóćéò"
+msgid "Local printer"
+msgstr "Ôïđéêüò ćêôőđùôȚò"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configuring IDE"
-msgstr "Ńęèìéóç IDE"
+msgid "Files Restored..."
+msgstr ""
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "IDE"
-msgstr "IDE"
+msgid "Package selection"
+msgstr "ĆđéëïăȚ đáêĘôùí"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "Ńęèìéóç êáńôțí PCMCIA ..."
+msgid "Mauritania"
+msgstr "Ìáőńéôáíßá"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid ""
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
+"\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
+"\n"
+msgstr ""
+"Ìđïńț íá êńáôȚóù ôéò ôńĘśïőóćò ńőèìßóćéò êáé íá őđïèĘóù üôé Țäç Ęśćé "
+"ńőèìéóôćß ï ćîőđçńćôçôȚò DHCP, đáńáêáëț ćëĘăîôć ćÜí Ęśù äéáâÜóćé óùóôÜ ôï "
+"Äßêôőï đïő śńçóéìïđïéćßôć ăéá ôï ôïđéêü óáò äßêôőï, äćí èá đćéńÜîùïęôć èá "
+"áëëÜîù ôéò ńőèìßóćéò ôïő ćîőđçńćôçôȚ DHCP.\n"
+"\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Button 3 Emulation"
-msgstr "Đńïóïìïßùóç 3 Êïőìđéțí"
+msgid ""
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
+msgstr ""
+"Äćí âńĘèçêáí ôïđéêïß ćêôőđùôĘò! Ăéá íá ńőèìßóćôć ìüíïé óáò Ęíáí ćêôőđùôȚ "
+"äțóôć ôï üíïìá ćêôőđùôȚ/üíïìá áńśćßïő óôç ăńáììȚ ćéóáăùăȚò (ĐáńÜëëçëćò "
+"èęńćò: /dev/lp0, /dev/lp1, ..., áíôßóôïéśćò ôùí LPT1:, LPT2:, ..., 1ïò "
+"ćêôőđùôȚò USB: /dev/usb/lp0, 2ïò USB ćêôőđùôȚò: /dev/usb/lp1, ...)."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Button 2 Emulation"
-msgstr "Đńïóïìïßùóç 2 Êïőìđéțí"
+msgid "All primary partitions are used"
+msgstr "Œëćò ïé đńùôćęïőóćò êáôáôìȚóćéò ćßíáé óć śńȚóç"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Buttons emulation"
-msgstr "Đńïóïìïßùóç Êïőìđéțí"
+msgid ""
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
+msgstr ""
+"Áöïę ăßíćé áőôü, đńïôćßíïőìć íá ćđáíćêêéíȚóćôć ôï Ś đćńéâÜëëïí ăéá íá "
+"áđïöęăćôć ôá đńïâëȚìáôá áëëáăȚò äéêôőáêïę ïíüìáôïò."
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../services.pm:1
#, c-format
-msgid "Please choose which serial port your mouse is connected to."
+msgid "Automatic detection and configuration of hardware at boot."
msgstr ""
-"Đáńáêáëț ćđéëĘîôć óćéńéáêȚ èęńá óôçí ïđïßá ćßíáé óőíäćäćìĘíï ôï đïíôßêé óáò."
+"Áőôüìáôç áíßśíćőóç êáé ńęèìéóç óőóêćőțí êáôÜ ôçí ćêêßíçóç ôïő óőóôȚìáôïò."
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Mouse Port"
-msgstr "Èęńá đïíôéêéïę"
+msgid "Installation Server Configuration"
+msgstr "ĆăêáôÜóôáóç Ńőèìßóćùí ÄéáêïìéóôȚ"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Please choose your type of mouse."
-msgstr "Đáńáêáëț ćđéëĘîôć ôęđï đïíôéêéïę."
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Encryption key for %s"
-msgstr "Êëćéäß êńőđôïăńÜöçóçò"
+msgid "Configuring IDE"
+msgstr "Ńęèìéóç IDE"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Upgrade %s"
-msgstr "ÁíáâÜèìéóç %s"
+msgid "Network functionality not configured"
+msgstr "Ç ëćéôïőńăéêüôçôá ôïő äéêôęïő äćí ńőèìßóôçêć"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Đńüêćéôáé ăéá ćăêáôÜóôáóç Ț ăéá áíáâÜèìéóç;"
+msgid "Configure module"
+msgstr "Ńęèìéóç áńèńțìáôïò"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Install/Upgrade"
-msgstr "ĆăêáôÜóôáóç/ÁíáâÜèìéóç"
+msgid "Cocos (Keeling) Islands"
+msgstr "ÍȚóïé Êüêïò (ÊȚëéíăê)"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "ÁőôȚ ćßíáé ç đëȚńçò ëßóôá ôùí äéáèĘóéìùí đëçêôńïëïăßùí"
+msgid "Disconnecting from the Internet "
+msgstr "Áđïóęíäćóç áđü ôï Äéáäßêôőï"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Đáńáêáëț ćđéëĘîôć ôçí äéÜôáîç đëçêôńïëïăßïő."
+msgid "You'll need to reboot before the modification can take place"
+msgstr "Áđáéôćßôáé ćđáíćêêßíçóç ăéá íá ćöáńìïóôïęí ïé áëëáăĘò"
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Quit"
-msgstr "žîïäïò"
+msgid "Provider phone number"
+msgstr "Áńéèìüò ôçëćöțíïő đáńïśĘá"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Host %s"
+msgstr "Œíïìá óőóôȚìáôïò"
+
+#: ../../lang.pm:1
#, c-format
-msgid "License agreement"
-msgstr "¶äćéá śńȚóçò"
+msgid "Armenia"
+msgstr "Áńìćíßá"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "An error occurred"
-msgstr "ĐńïêëȚèçêć óöÜëìá"
+msgid "Fiji"
+msgstr "Ößôæé"
-#: ../../install_steps_newt.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
msgstr ""
-" <Tab>/<Alt-Tab> ÁëëáăȚ đćäßïő | <Space> ćđéëïăȚ | <F12> ćđüìćíç ïèüíç"
-
-#: ../../install_steps_newt.pm:1
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "ĆăêáôÜóôáóç Mandrake Linux %s"
-#: ../../install_steps.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "No floppy drive available"
-msgstr "Äćí őđÜńśćé äéáèĘóéìïò ïäçăüò äéóêĘôáò"
+msgid "Second floppy drive"
+msgstr "Äćęôćńïò ïäçăüò äéóêĘôáò"
-#: ../../install_steps.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Welcome to %s"
-msgstr "Êáëțò ïńßóáôć óôï %s"
+msgid "About Harddrake"
+msgstr "ÓśćôéêÜ ìć ôï Harddrake"
-#: ../../install_steps.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+msgid "Drive capacity"
msgstr ""
-"ÌćńéêÜ óçìáíôéêÜ đáêĘôá äćí ćăêáôáóôÜèçêáí óùóôÜ.\n"
-"Ï ïäçăüò CD-ROM Ț ôï CD-ROM ćßíáé ćëáôôùìáôéêü.\n"
-"ĆëĘăîôć ôï CD-ROM óć Ęíá Üëëï óęóôçìá śńçóéìïđïéțíôáò ôçí ćíôïëȚ \"rpm -qpl "
-"Mandrake/RPMS/*.rpm\"\n"
-#: ../../install_steps.pm:1
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Äéđëü óçìćßï óęíäćóçò %s"
-
-#: ../../install_steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
msgstr ""
-"ĐńïêëȚèçêć Ęíá óöÜëìá đïő äćí îĘńù đțò íá ôï śćéńéóôț.\n"
-"Óőíćśßóôć ìć äéêȚ óáò ćőèęíç."
-
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Please wait"
-msgstr "Đáńáêáëț đćńéìĘíćôć"
+"ĆéóÜăćôć ìéá äéóêĘôá óôïí ïäçăü äéóêĘôáò\n"
+"Œëá ôá äćäïìĘíá óć áőôȚ ôç äéóêĘôá èá śáèïęí"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Ok"
-msgstr "ĆíôÜîćé"
+msgid "Size: %s"
+msgstr "ÌĘăćèïò: %s"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Finish"
-msgstr "ÔĘëïò"
+msgid "Control and Shift keys simultaneously"
+msgstr "Ôáőôüśńïíá ôá đëȚêôńá Control êáé Shift"
-#: ../../interactive.pm:1 ../../standalone/draksec:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Basic"
-msgstr "ÂáóéêȚ"
+msgid "secondary"
+msgstr "äćőôćńćęïőóá"
-#: ../../interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Advanced"
-msgstr "Ăéá ĐńïśùńçìĘíïőò"
+msgid "View Backup Configuration."
+msgstr "ĐńïâïëȚ Ńőèìßóćùí ÁíôéăńÜöùí Áóöáëćßáò"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Remove"
-msgstr "Áöáßńćóçò"
+msgid "if set to yes, report check result to syslog."
+msgstr "áí ïńéóôćß íáé, áđïôĘëćóìá áíáöïńÜò ćëĘăśïő óôï syslog."
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Modify"
-msgstr "Ôńïđïđïßçóç"
+msgid "No password"
+msgstr "Śùńßò êùäéêü đńüóâáóçò"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add"
-msgstr "ĐńïóèȚêç"
+msgid "Nigeria"
+msgstr "Íéăçńßá"
-#: ../../interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Choose a file"
-msgstr "ĆđéëĘîôć Ęíá áńśćßï"
+msgid "There is no existing partition to use"
+msgstr "Äćí őđÜńśïőí êáôáôìȚóćéò đńïò śńȚóç"
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
msgstr ""
-"Ćäț ìđïńćßôć íá ćđéëĘîćôć ôï đëȚêôńï Ț ôïí óőíäőáóìü\n"
-"đëȚêôńùí ćíáëëáăȚò ôùí äéáôÜîćùí đëçêôńïëïăßùí\n"
-"(đ.ś. ÁăăëéêȚ Ț ĆëëçíéêȚ)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "Äćîéü đëȚêôńï \"Windows\""
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Left \"Windows\" key"
-msgstr "Áńéóôćńü đëȚêôńï \"Windows\""
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "\"Menu\" key"
-msgstr "ĐëȚêôńï \"Ìćíïę\""
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Ôáőôüśńïíá ôá đëȚêôńá Alt êáé Shift"
+"Ïé đáńáêÜôù óáńùôĘò\n"
+"\n"
+"%s\n"
+"ćßíáé äéáèĘóéìïé óôï óęóôçìÜ óáò\n"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ôáőôüśńïíá ôá đëȚêôńá Ctrl êáé Alt"
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
+msgstr ""
+"Ăéá íá ćêôőđțóćôć óć Ęíáí ćêôőđùôȚ socket Ț TCP , đńĘđćé íá äțóćôć ôï \n"
+"äéêôőáêü üíïìá ôïő ćêôőđùôȚ êáé đńïáéńćôéêÜ ôïí áńéèìü èęńáò ( ćî ïńéóìïę "
+"9100). Óôïőò ćîőđçńćôçôĘò HP JetDirect Ț èęńá óőíȚèùò ćßíáé 9100, óć Üëëïőò "
+"ćîőđçńćôçôĘò đïéêßëç. Äćßôć ôï ćăśćéńßäéï śńȚóçò ôïő őëéêïę óáò."
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "CapsLock key"
-msgstr "ĐëȚêôńï Capslock"
+msgid "Hard drive information"
+msgstr "Đëçńïöïńßćò óêëçńïę äßóêïő"
#: ../../keyboard.pm:1
#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Ôáőôüśńïíá ôá đëȚêôńá Control êáé Shift"
+msgid "Russian"
+msgstr "Ńùóéêü"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "Ôáőôüśńïíá ôá äęï đëȚêôńá Shift"
+msgid "Jordan"
+msgstr "Éïńäáíßá"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Right Alt key"
-msgstr "Äćîéü đëȚêôńï Alt"
+msgid "Hide files"
+msgstr "Áđüêńőűç áńśćßùí"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Yugoslavian (latin)"
-msgstr "Ăéïőăêïóëáâéêü (ëáôéíéêü)"
+msgid "Auto-detect printers connected to this machine"
+msgstr "Áőôüìáôç áíßśíćőóç ćêôőđùôțí óőíäćìĘíïé óć áőôü ôï ìçśÜíçìá"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "ÂéćôíÜì \"numeric row\" QWERTY"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgstr ""
+"Ôï XawTV äćí ćßíáé ćăêáôćóôçìĘíï!\n"
+"\n"
+"\n"
+"Áí Ęśćôć êÜńôá Ôçëćüńáóçò áëëÜ ôï DrakX äćí ôçí âńȚêć (śùńßò bttv\n"
+"module óôï \"/etc/modules\") êáé äćí ćăêáôĘóôçóć ïęôć ôï xawtv, đáńáêáëț\n"
+"óôćßëôć ôá áđïôĘëćóìá ôïő \"lspcidrake -v -f\" óôï \"install\\@mandrakesoft."
+"com\"\n"
+"ìć èĘìá \"undetected TV card\".\n"
+"\n"
+"\n"
+"Ìđïńćßôć íá ćăêáôáóôȚóćôć ôï xawtv ìć ôçí ćíôïëȚ \"urpmi xawtv\" óáí\n"
+"root, áđü ôçí êïíóüëá."
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "US keyboard (international)"
-msgstr "US äéćèíĘò"
+msgid "Sorry, no floppy drive available"
+msgstr "ËőđÜìáé, äćí őđÜńśćé äéáèĘóéìïò ïäçăüò äéóêĘôáò"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "US keyboard"
-msgstr "Ç.Đ.Á. (US)"
+msgid "Bolivia"
+msgstr "Âïëéâßá"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "UK keyboard"
-msgstr "ÌćăÜëç Âńćôáíßá (UK)"
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
+"Ńőèìßóôć ôïí ćîőđçńćôçôȚ Windows țóôć íá ćßíáé äéáèĘóéìïò ï ćêôőđùôȚò óôï "
+"đńùôüêïëëï IPP êáé ńőèìßóôć ôéò ćêôőđțóćéò áđü áőôü ôï ìçśÜíçìá ìć ôïí ôęđï "
+"óęíäćóçò \"%s\" óôï Printerdrake.\n"
+"\n"
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Ukrainian"
-msgstr "Ïőêńáíéêü"
+msgid "Bad package"
+msgstr "ËÜèïò đáêĘôï"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Ôïőńêéêü (ìïíôĘńíï \"Q\" ìïíôĘëï)"
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
+"Ìćôáìïńöțóôć ôï ìçśÜíçìÜ óáò óć Ęíáí äőíáôü äéáêïìéóôȚ Linux ìć ìćńéêÜ êëéê "
+"ôïőđïíôéêéïę óáò: ÄéáêïìéóôȚò Éóôïę, ôáśőäńïìćßïő, äńïìïëïăçôȚò, "
+"ćîőđçńćôçôȚò áńśćßùí êáé ćêôőđùôțí, ..."
-#: ../../keyboard.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Ôïőńêéêü (đáńáäïóéáêü \"F\" ìïíôĘëï)"
+msgid "DrakSec Basic Options"
+msgstr "ÂáóéêĘò ĆđéëïăĘò DrakSec"
-#: ../../keyboard.pm:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Tajik keyboard"
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program. Just type \"sndconfig\" in a console."
msgstr ""
+"\n"
+"\n"
+"\n"
+"Óçìćßùóç: Áí Ęśćôć êÜńôá Țśïő ISA PnP, èá đńĘđćé íá ćêôćëĘóćôć ôï đńüăńáììá "
+"sndconfig. ÁđëÜ ăńÜűôć \"sndconfig\" óć ìéá êïíóüëá."
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Thai keyboard"
-msgstr "ÔáúëáíäĘæéêï"
+msgid "Romania"
+msgstr "Ńïőìáíßá"
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "Ôáìéëéêü (äéÜôáîç ăńáöïìçśáíȚ)"
+msgid "choose device"
+msgstr "ĆđéëĘîôć óőóêćőȚ"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr "Ôáìéëéêü (äéÜôáîç ISCII)"
+msgid "Canada"
+msgstr "ÊáíáäÜò"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Serbian (cyrillic)"
-msgstr "ÓĘńâéêï (êőńéëëéêü)"
+msgid "Remove from LVM"
+msgstr "Áöáßńćóç áđü ôï LVM"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Óëïâáêßáò (QWERTY)"
+msgid "Timezone"
+msgstr "ÙńïëïăéáêȚ Æțíç"
#: ../../keyboard.pm:1
#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Óëïâáêßáò (QWERTZ)"
+msgid "German"
+msgstr "Ăćńìáíéêü"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Slovenian"
-msgstr "Óëïâćíßáò"
+msgid "Next ->"
+msgstr "Ćđüìćíï -»"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Swedish"
-msgstr "Óïőçäéêü"
+msgid ""
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
+msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Russian (Yawerty)"
-msgstr "Ńùóéêü (Yawerty)"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
+msgstr ""
+"\n"
+"\n"
+" Ïäçăüò\n"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Russian"
-msgstr "Ńùóéêü"
+msgid "Guinea-Bissau"
+msgstr "ĂïőúíĘá-ÌđéóÜïő"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Romanian (qwerty)"
-msgstr "Ńïőìáíéêü (qwerty)"
+msgid "Horizontal refresh rate"
+msgstr "Óőśíüôçôá ïńéæüíôéáò áíáíĘùóçò"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Romanian (qwertz)"
-msgstr "Ńïőìáíéêü (qwertz)"
+msgid ""
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
+msgstr ""
+"Äćí ìđïńț íá áöáéńĘóù ôï óçìćßï óęíäćóçò êáèțò áőôȚ ç êáôÜôìçóç "
+"śńçóéìïđïéćßôáé\n"
+"ăéá loopback. ÁöáéńĘóôć đńțôá ôï loopback"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Canadian (Quebec)"
-msgstr "Êáíáäéêü (ÊćìđĘê)"
+msgid ""
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
+msgstr ""
+"Ç ńęèìéóç äéêôęïő đïő Ęăéíć êáôÜ ôç äéÜńêćéá ôçò ćăêáôÜóôáóçò äćí Țôáí "
+"äőíáôüí íá ćêêéíçèćß. Đáńáêáëț ćëĘăîôć ćÜí ôï äßêôőï ćßíáé đńïóâÜóéìï ìćôÜ "
+"ôçí ćêêßíçóç êáé äéïńèțóôć ôéò ńőèìßóćéò ìć ôçí śńȚóç ôïő ÊĘíôńïő ĆëĘăśïő "
+"ôçò Mandrake, óôï ôìȚìá \"Äßêôőï & Äéáäßêôőï\" / \"Óęíäćóç\" êáé ìćôÜ "
+"ńőèìßóôć ôïí ćêôőđùôȚ ćđßóçò ìć ôï ÊĘíôńï ĆëĘăśïő Mandrake óôï ôìȚìá \"Őëéêü"
+"\"/\"ĆêôőđùôȚò\""
-#: ../../keyboard.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Portuguese"
-msgstr "Đïńôïăáëéêü"
+msgid "USB controllers"
+msgstr "ĆëćăêôĘò USB"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Đïëùíéêü (äéÜôáîç qwertz)"
+msgid "What norm is your TV using?"
+msgstr "Đïéï óęóôçìá śńçóéìïđïéćß ç ôçëćüńáóç óáò;"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Đïëùíéêü (äéÜôáîç qwerty)"
+msgid "Type:"
+msgstr "Ôęđïò:"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Norwegian"
-msgstr "Íïńâçăéêü"
+msgid "Share name"
+msgstr "Œíïìá đüńïő:"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Dutch"
-msgstr "Ïëëáíäéêü"
+msgid "enable"
+msgstr "ćíćńăïđïßçóç"
-#: ../../keyboard.pm:1
+# fuzzy
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Maltese (US)"
+msgid ""
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
msgstr ""
+"Óęíäćóç ìć ôçí ôïđïèćóßá ôçò Mandrake Linux ăéá ëȚűç ôùí äéáèĘóéìùí ôüđùí "
+"ëȚűçò..."
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Maltese (UK)"
+msgid ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
msgstr ""
+"žíá đńüâëçìá ćìöáíßóôçêć êáôÜ ôçí ćđáíćêêßíçóç ôïő äéêôęïő: \n"
+"\n"
+"%s"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Ìïăăïëéêü (ÊőńéëëéêȚ)"
-
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Myanmar (Burmese)"
-msgstr "ÌéáíìÜń"
-
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Macedonian"
-msgstr "Ìáêćäïíéêü Đ.Ă Ä."
+msgid "Remove the loopback file?"
+msgstr "Íá áöáéńćèćß ôï áńśćßï loopback;"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Malayalam"
-msgstr "Ìáëáăéáëáìéêü"
+msgid "Selected size is larger than available space"
+msgstr "Ôï ćđéëćăìĘíï ìĘăćèïò ćßíáé ìćăáëęôćńï áđü ôï äéáèĘóéìï śțńï"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Latvian"
-msgstr "Ëćôïíéêü"
+msgid "NCP server name missing!"
+msgstr "Ôï üíïìá ôïő ćîőđçńćôçôȚ NCP ëćßđćé!"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Ëéèïőáíéêü \"öùíçôéêü\" QWERTY"
+msgid "Please choose your country."
+msgstr "Đáńáêáëț ćđéëĘîôć ôçí śțńá óáò."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Ëéèïőáíéêü \"number row\" QWERTY"
+msgid "Hard Disk Backup files..."
+msgstr "Áíôßăńáöá Áóöáëćßáò Óêëçńïę Äßóêïő"
#: ../../keyboard.pm:1
#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Ëéèïőáíéêü AZERTY (íĘï)"
+msgid "Laotian"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Ëéèïőáíéêü AZERTY (đáëéü)"
+msgid "Samoa"
+msgstr "Óáìüá"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Laotian"
+msgid ""
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
msgstr ""
+"Ôï đńùôüêïëëï rstat ćđéôńĘđćé óôïőò śńȚóôćò ćíüò äéêôęïő ôçí\n"
+"óőëëïăȚ ìćôńȚóćùí ćđéäüóćùí ăéá ïđïéïäȚđïôć óęóôçìá óć áőôü \n"
+"ôï äßêôőï."
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Latin American"
-msgstr "ËáôéíéêȚò ÁìćńéêȚò"
+msgid "Re-generating list of configured scanners ..."
+msgstr "Ćđáíáäçìéïőńăßá ëßóôáò ìć ôïőò ńőèìéóìĘíïőò óáńùôĘò ..."
-#: ../../keyboard.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Korean keyboard"
-msgstr "ÊïńćÜôéêï Đëçêôńïëüăéï"
+msgid "Scanner"
+msgstr "ÓáńùôȚò"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Japanese 106 keys"
-msgstr "Éáđùíéêü 106 đëȚêôńùí"
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr ""
+"ĐńïóïśȚ: Ç äïêéìȚ óć áőôȚ ôçí êÜńôá ăńáöéêțí ìđïńćß íá đáățóćé ôïí "
+"őđïëïăéóôȚ óáò"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Inuktitut"
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr ""
+"Ôï êùäéêü üíïìá ìđïńćß íá đćńéĘśćé ìüíï đćæÜ ăńÜììáôá, áńéèìïęò, `-' êáé `_'"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Italian"
-msgstr "Éôáëéêü"
+msgid "Menudrake"
+msgstr "Menudrake"
-#: ../../keyboard.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Icelandic"
-msgstr "Éóëáíäéêü"
+msgid "Welcome To Crackers"
+msgstr "Êáëțò ïńßóáôć óôïőò Crackers"
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Iranian"
-msgstr "Éńáíéêü"
+msgid "Module options:"
+msgstr "ĆđéëïăĘò áńèńțìáôïò:"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "ÉóńáȚë (öùíçôéêü)"
+msgid "Secure your networks with the Multi Network Firewall"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Israeli"
-msgstr "ÉóńáȚë"
+msgid "Go on without configuring the network"
+msgstr "ÓőíĘśéóç śùńßò ôçí ńęèìéóç ôïő äéêôęïő"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Croatian"
-msgstr "Êńïáôéêü"
+msgid "Abort"
+msgstr "Áêęńùóç"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hungarian"
-msgstr "Ïőăăńéêü"
+msgid "No password prompt on %s at port %s"
+msgstr "Śùńßò ćńțôçóç êùäéêïę óôï %s óôç èęńá %s"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Gurmukhi"
-msgstr "Ăêïőńìïęêé"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "óőóêćőȚ."
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Gujarati"
-msgstr "Ăêïőôæáńáôéêü"
+msgid "Usage of remote scanners"
+msgstr "ŚńȚóç ôùí áđïìáêńőóìĘíùí óáńùôțí"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Greek"
-msgstr "Ćëëçíéêü"
+msgid "\t-CDROM.\n"
+msgstr "\t-CDROM.\n"
-#: ../../keyboard.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Ăćùńăßá (\"ËáôéíéêȚ\" äéÜôáîç)"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
+msgstr ""
+"Ç êáôÜôìçóç ôùí Windows ćßíáé đïëę êáôáêćńìáôéóìĘíç, đáńáêáëț ôńĘîôć đńțôá "
+"ôï ``defrag'' ìĘóá áđü ôá Windows êáé îćêéíȚóôć îáíÜ ôçí ćăêáôÜóôáóç ôïő "
+"Mandrake Linux "
#: ../../keyboard.pm:1
#, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Ăćùńăßá (\"Ńțóéêç\" äéÜôáîç)"
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak (Íïńâçăéêü)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "French"
-msgstr "Ăáëëéêü"
+msgid "Hard Disk Backup Progress..."
+msgstr "Äéáäéêáóßá ÁíôéăńÜöùí áóöáëćßáò óôïí Óêëçńü Äßóêï..."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Finnish"
-msgstr "Öéíëáíäéêü"
+msgid "Unable to fork: %s"
+msgstr "Áäőíáìßá fork: %s"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Spanish"
-msgstr "Éóđáíéêü"
+msgid "Type: "
+msgstr "Ôęđïò: "
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Estonian"
-msgstr "Ćóèïíéêü"
+msgid "<-- Edit Client"
+msgstr "<-- Ćđćîćńăáóßá ĐćëÜôç"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Óïőçäéêü)"
+msgid "no fonts found"
+msgstr "äćí âńĘèçêáí ăńáììáôïóćéńĘò"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Íïńâçăéêü)"
+msgid "Mouse"
+msgstr "Đïíôßêé"
-#: ../../keyboard.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak (ÇĐÁ)"
+msgid "not enough room in /boot"
+msgstr "äćí őđÜńśćé áńêćôüò śțńïò óôï /boot"
-#: ../../keyboard.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Danish"
-msgstr "Äáíéêü"
+msgid "Choosing an arbitratry driver"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Devanagari"
-msgstr "Äćâáíáăáńéêü"
+msgid "Host name"
+msgstr "Œíïìá óőóôȚìáôïò"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "German (no dead keys)"
-msgstr "Ăćńìáíéêü (śùńßò íćêńÜ đëȚêôńá)"
+msgid "Liechtenstein"
+msgstr "ËéśôćíóôÜéí"
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "German"
-msgstr "Ăćńìáíéêü"
+msgid "the color of the progress bar"
+msgstr "Ôï śńțìá ôçò ăńáììȚò đńïüäïő"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Czech (QWERTY)"
-msgstr "ÔóĘśéêï (QWERTY)"
+msgid "Suppress Fonts Files"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Czech (QWERTZ)"
-msgstr "ÔóĘśéêï (QWERTZ)"
+msgid "Add to RAID"
+msgstr "ĐńïóèȚêç óôï RAID"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Swiss (French layout)"
-msgstr "Ćëâćôéêü (ĂáëëéêȚ äéÜôáîç)"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" Linux\n"
+"\n"
+" ĆôéêĘôá\n"
+"\n"
+"\n"
+" Ćéêüíá\n"
+"\n"
+"\n"
+" Root óőóêćőȚ Linux\n"
+"\n"
+"\n"
+" ćíćńăïđïßçóç\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" Initrd\n"
+" óőóêćőȚ\n"
+"\n"
+"\n"
+" Initrd ćî' ïńéóìïę\n"
+"\n"
+" ćî' ïńéóìïę\n"
+"\n"
+"\n"
+"\n"
+" ćî' ïńéóìïę\n"
+"\n"
+" ŚùńßòVideo\n"
+"\n"
+"\n"
+"\n"
+" ĐńïćđéëćăìĘíï ćî' ïńéóìïę Linux\n"
+"\n"
+"."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Swiss (German layout)"
-msgstr "Ćëâćôéêü (ĂćńìáíéêȚ äéÜôáîç)"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"Ï ćêôőđùôȚò \"%s\" đńïóôĘèçêć ìć ćđéôőśßá óôï Star Office/OpenOffice.org/GIMP"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Belarusian"
-msgstr "Ëćőêïńùóßáò"
+msgid "No floppy drive available!"
+msgstr "Äćí őđÜńśćé äéáèĘóéìïò ïäçăüò äéóêĘôáò!"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Bosnian"
-msgstr "Âïóíßáò"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
+msgstr ""
+"Ăéá íá ìÜèćôć đćńéóóüôćńá ăéá ôéò äéáèĘóéìćò ćíôïëĘò ăéá ôïí ôńĘśïí ćêôőđùôȚ "
+"äéáâÜóôć ôçí ëßóôá đïő öáßíćôć đáńáêÜôù Ț êÜíôć êëéê óôï \"Ćêôęđùóç ëßóôáò "
+"ćđéëïățí\"%s%s\n"
+"\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "ÂńáæéëéÜíéêï (ABNT-2)"
+msgid "Continue anyway?"
+msgstr "Íá óőíćśßóù;"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Bulgarian (BDS)"
-msgstr "Âïőëăáńéêü (BDS)"
+msgid ""
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
+msgstr ""
+"Ï ćêôőđùôȚò óáò äćí őđÜńśćé óôç ëßóôá, đáńáêáëț äéáëĘîôć Ęíáí óőìâáôü Ț Ęíáí "
+"đáńüìïéï ćêôőđùôȚ."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "Âïőëăáńéêü (öùíçôéêü)"
+msgid "Printer"
+msgstr "ĆêôőđùôȚò"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Bengali"
-msgstr "Âćăăáëéêü"
+msgid "Saudi Arabia"
+msgstr "ÓáïőäéêȚ Áńáâßá"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Belgian"
-msgstr "Âćëăéêü"
+msgid "Internet"
+msgstr "Äéáäßêôőï"
-#: ../../keyboard.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "ÁæćńìđáúôæÜí (Ëáôéíéêü)"
+msgid "Some devices were added:\n"
+msgstr "ÏńéóìĘíćò óőóêćőĘò đńïóôĘèçêáí:\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Arabic"
-msgstr "Áńáâéêü"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "Ăćùìćôńßá: %s êęëéíäńïé, %s êćöáëĘò, %s ôïìćßò\n"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Armenian (phonetic)"
-msgstr "Áńìćíéêü (öùíçôéêü)"
+msgid "Printing on the printer \"%s\""
+msgstr "Ćêôęđùóç óôïí ćêôőđùôȚ \"%s\""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Armenian (typewriter)"
-msgstr "Áńìćíéêü (ăńáöïìçśáíȚ)"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr ""
+"ôï /etc/hosts.allow êáé /etc/hosts.deny Ęśïőí Țäç ńőèìéóôćß - äćí "
+"ìćôáôńÜđçêáí"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Armenian (old)"
-msgstr "Áńìćíéêü (đáëéü)"
+msgid "Restore From Tape"
+msgstr "ĆđáíáöïńÜ Áđü Ôáéíßá"
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Albanian"
-msgstr "Áëâáíéêü"
+msgid "Choose the profile to configure"
+msgstr "ĆđéëĘîôć ôï đńïößë ăéá ńęèìéóç"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Polish"
-msgstr "Đïëùíéêü"
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
+msgstr ""
+"\n"
+"\n"
+"\n"
+" ćî' ïńéóìïę."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Dvorak"
-msgstr "Dvorak"
+msgid "Backup Now from configuration file"
+msgstr "Äçìéïőńăßá ÁíôéăńÜöùí Áóöáëćßáò áđü ôï áńśćßï ńőèìßóćùí"
-#: ../../lang.pm:1
-#, c-format
-msgid "Zimbabwe"
-msgstr "ÆéìđÜìđïőć"
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
+msgid "Mount points should contain only alphanumerical characters"
+msgstr ""
+"Ôï üíïìá ôïő ćêôőđùôȚ đńĘđćé íá đćńéĘśćé ìüíï ăńÜììáôá, áńéèìïęò êáé ôïí "
+"śáńáêôȚńá underscore"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Zambia"
-msgstr "ÆÜìđéá"
+msgid "Restarting printing system..."
+msgstr "Ćđáíćêêßíçóç ôïő óőóôȚìáôïò ćêôęđùóçò..."
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
-#, c-format
-msgid "South Africa"
-msgstr "Íüôéïò ÁöńéêȚ"
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
+msgstr ""
+"\n"
+"\n"
+" ĐńïóèȚêç."
-#: ../../lang.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Serbia"
-msgstr "Óćńâßá"
+msgid "See hardware info"
+msgstr "ĐńïâïëȚ đëçńïöïńéțí őëéêïę"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mayotte"
-msgstr "Ìáăéüô"
+msgid "First sector of boot partition"
+msgstr "Đńțôïò ôïìĘáò ôçò êáôÜôìçóçò ćêêßíçóçò"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Yemen"
-msgstr "ŐćìĘíç"
+msgid "Printer manufacturer, model"
+msgstr "ÊáôáóêćőáóôȚ ćêôőđùôȚ, ìïíôĘëï"
-#: ../../lang.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Samoa"
-msgstr "Óáìüá"
+msgid "PDQ - Print, Don't Queue"
+msgstr "PDQ - Print, Don't Queue"
-#: ../../lang.pm:1
-#, c-format
-msgid "Wallis and Futuna"
-msgstr "ÍȚóïé ĂïőÜëéò êáé Öïőôïęíá"
+#: ../../standalone.pm:1
+#, fuzzy, c-format
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
+msgstr ""
+"\n"
+" ĆîőđçńćôçôȚò\n"
+" ćíćńăïđïßçóç ćíćńăïđïßçóç\n"
+" áđćíćńăïđïßçóç áđćíćńăïđïßçóç\n"
+"\n"
+"\n"
+" śńȚóôçò\n"
+" ÄéáăńáöȚ śńȚóôçò\n"
+"\n"
+" ÄéáăńáöȚ"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Vanuatu"
-msgstr "ÂáíïőÜôïő"
+msgid "Subnet Mask:"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Vietnam"
-msgstr "ÂéćôíÜì"
+msgid "LiLo and Bootsplash themes installation successfull"
+msgstr "ĆđéôőśȚò ćăêáôÜóôáóç èćìÜôùí LiLo êáé Bootsplash"
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "ĐáńèĘíïé ÍȚóïé(ÁìćńéêáíéêĘò)"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"Ïé äęï êńßóéìćò đáńÜìćôńïé ćßíáé ç óőśíüôçôá êáôáêüńőöçò áíáíĘùóçò ćßíáé ç\n"
+"óőśíüôçôá ìć ôçí ïđïßá áíáíćțíćôáé ïëüêëçńç ç ïèüíç, êáèțò êáé ç óőśíüôçôá\n"
+"ïńéæüíôéáò áíáíĘùóçò, ç ïđïßá ćßíáé ç óőśíüôçôá ìć ôçí ïđïßá áíáíćțíïíôáé\n"
+"ïé ïńéæüíôéćò ăńáììĘò.\n"
+"\n"
+"Ćßíáé ĐÏËŐ ÓÇÌÁÍÔÉÊÏ íá ìçí ćđéëĘîćôć ôęđï ïèüíçò ôïő ïđïßïő ïé óőśíüôçôćò\n"
+"áíáíĘùóçò ćßíáé ćêôüò ôùí ïńßùí ôçò ïèüíçò óáò: őđÜńśćé êßíäőíïò "
+"êáôáóôńïöȚò\n"
+"ôçò ïèüíçò óáò. Áí äćí ćßóôć óßăïőńïé, êÜíôć ìéá óőíôçńçôéêȚ ćđéëïăȚ."
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Virgin Islands (British)"
-msgstr "ĐáńèĘíïé ÍȚóïé(ÂńćôáíéêĘò)"
+msgid "Modify"
+msgstr "Ôńïđïđïßçóç"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Venezuela"
-msgstr "ÂćíćæïőĘëá"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
+"\n"
+" Ćđßóçò ïé ćíôïëĘò \"%s\" êáé \"%s\" óáò ćđéôńĘđïőí íá ïńßóćôć ôéò ńőèìßóćéò "
+"ćđéëïățí ăéá ìéá óőăêćêńéìĘíç ćńăáóßá ćêôęđùóçò. ÁđëÜ đńïóèĘóôć ôéò "
+"ćđéèőìçôĘò ńőèìßóćéò áđü ôçí ăńáììȚ ćíôïëțí, đ.ś. \"%s <áńśćßï>\".\n"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "¶ăéïò ÂéêĘíôéïò êáé Ăńćíáíôßíćò"
+msgid "Need hostname, username and password!"
+msgstr "ŚńćéÜæćôáé ôï äéêôőáêü üíïìá, üíïìá śńȚóôç êáé êùäéêü đńüóâáóçò!"
-#: ../../lang.pm:1
+#: ../../diskdrake/dav.pm:1
#, fuzzy, c-format
-msgid "Vatican"
-msgstr "Ëćôïíéêü"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
+"ćîőđçńćôçôȚò\n"
+" ćîőđçńćôçôȚò\n"
+" ćîőđçńćôçôȚò\n"
+" ÍĘï."
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Uzbekistan"
-msgstr "ÏőæìđćêéóôÜí"
+msgid "HardDrake"
+msgstr "HardDrake"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Uruguay"
-msgstr "ÏőńïőăïőÜç"
+msgid "new"
+msgstr "íĘï"
-#: ../../lang.pm:1
-#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "ÌéêńÜ áđïìïíùìĘíá íçóéÜ ÇíùìĘíùí Đïëéôćéțí"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Would you like to try again?"
+msgstr "Èá èĘëáôć íá ńőèìßóćôć Ęíáí ćêôőđùôȚ;"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Uganda"
-msgstr "ÏőăêÜíôá"
+msgid "Wizard"
+msgstr "Ïäçăüò"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ukraine"
-msgstr "Ïőêńáíßá"
+msgid "Edit selected server"
+msgstr "Ćđćîćńăáóßá ćđéëćăìĘíïő ćîőđçńćôçôȚ"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Tanzania"
-msgstr "Ôáíæáíßá"
+msgid "Please choose where you want to backup"
+msgstr "Đáńáêáëț ćđéëĘîôć ôçí èĘóç ôùí áíôéăńÜöùí áóöáëćßáò"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Taiwan"
-msgstr "ÔáúâÜí"
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr ""
+"Áđáéôćßôáé ćđáíćêêßíçóç ăéá íá ćíćńăïđïéçèïęí ïé áëëáăĘò óôïí đßíáêá "
+"êáôáôìȚóćùí"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Tuvalu"
-msgstr "Ôïőâáëïę"
+msgid "Do not include the browser cache"
+msgstr "Śùńßò ôçí cache ôïő đćńéçăçôȚ"
-#: ../../lang.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Trinidad and Tobago"
-msgstr "ÔńéíéíôÜíô êáé ÔïìđÜăêï"
+msgid "Please, choose your keyboard layout."
+msgstr "Đáńáêáëț ćđéëĘîôć ôçí äéÜôáîç ôïő đëçêôńïëïăßïő."
-#: ../../lang.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
-msgid "Turkey"
-msgstr "Ôïőńêßá"
+msgid "Standard"
+msgstr "Ôőđéêü"
-#: ../../lang.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Tonga"
-msgstr "Ôüăêá"
+msgid "Please choose your mouse type."
+msgstr "Đáńáêáëț ćđéëĘîôć ôęđï đïíôéêéïę."
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Tunisia"
-msgstr "Ôőíçóßá"
+msgid "Connect..."
+msgstr "Óęíäćóç..."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Turkmenistan"
-msgstr "ÔïőńêìćíéóôÜí"
+msgid "Failed to configure printer \"%s\"!"
+msgstr "ÁđĘôőść ç ńęèìéóç ôïő ćêôőđùôȚ \"%s\"!"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "East Timor"
-msgstr "Áíáôïëéêü Ôéìüń"
+msgid "not configured"
+msgstr "äćí ńőèìßóôçêć"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Tokelau"
-msgstr "ÔïêćëÜïő"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Tajikistan"
-msgstr "ÔáôæéêéóôÜí"
+msgid "About"
+msgstr "Đćńß"
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Thailand"
-msgstr "ÔáúëÜíäç"
+msgid "Proxies configuration"
+msgstr "Ńőèìßóćéò proxies"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Togo"
-msgstr "Ôüăêï"
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "French Southern Territories"
-msgstr "ĂáëëéêĘò Íüôéćò ĐćńéïśĘò"
+msgid "Start: sector %s\n"
+msgstr "ÁńśȚ: ôïìĘáò %s\n"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Chad"
-msgstr "Ôóáíô"
+msgid "Network interface already configured"
+msgstr "Ç äéćđáöȚ Äéêôęïő Ęśćé Țäç ńőèìéóôćß"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "ÍȚóïé Ôïęńêò êáé ÊáÀêïò"
+msgid "Couldn't access the floppy!"
+msgstr "Äćí ćßíáé äőíáôȚ ç đńüóâáóç óôç äéóêĘôá!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Swaziland"
-msgstr "ÓïőáæéëÜíäç"
+msgid "connecting to Bugzilla wizard ..."
+msgstr "óęíäćóç óôïí ïäçăü Bugzilla ..."
-#: ../../lang.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Syria"
-msgstr "Óőńßá"
+msgid "Mail Server"
+msgstr "ĆîőđçńćôçôȚò Ôáśőäńïìćßïő"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "El Salvador"
-msgstr "Ćë Óáëâáäüń"
+msgid "Please click on a partition"
+msgstr "Đáńáêáëț êÜíôć êëéê óć ìéá êáôÜôìçóç"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Sao Tome and Principe"
-msgstr "ÓÜï Ôüìć êáé Đńßíôóéđć"
+msgid "Linux"
+msgstr "Linux"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Suriname"
-msgstr "ÓïőńéíÜì"
+msgid "Have a nice day!"
+msgstr "ÊáëȚ óáò ìĘńá!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Somalia"
-msgstr "Óïìáëßá"
+msgid "across Network"
+msgstr "óôï Äßêôőï"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Senegal"
-msgstr "ÓćíćăÜëç"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "San Marino"
-msgstr "¶ăéïò Ìáńßíïò"
+msgid "Upgrade %s"
+msgstr "ÁíáâÜèìéóç %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sierra Leone"
-msgstr "ÓéĘńńá Ëćüíć"
+msgid "Select Printer Connection"
+msgstr "Ôńüđïò óęíäćóçò ćêôőđùôȚ"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Slovakia"
-msgstr "Óëïâáêßá"
+msgid "Scanning for TV channels in progress ..."
+msgstr "Ăßíćôáé áíáæȚôçóç óôáèìțí ôçëćüńáóçò ..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "ÍȚóïé ÓâÜëìđáńíô êáé Ăéáí ÌÜăéćí"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
+"ÓöÜëìá êáôÜ ôçí áđïóôïëȚ áńśćßïő ìĘóù FTP.\n"
+"Đáńáêáëț äéïńèțóôć ôç ńęèìéóç ôïő FTP."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Slovenia"
-msgstr "Óëïâćíßá"
+msgid "IP Range Start:"
+msgstr "Œńéï Ćêêßíçóçò ÉŃ:"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Saint Helena"
-msgstr "ÍȚóïò Áăßáò ĆëĘíçò"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"Ç őđçńćóßá őđćńćîőđçńćôçôȚ Äéáäéêôęïő (inetd) îćêéíÜćé ìéá đïéêéëßá\n"
+"Üëëùí őđçńćóéțí äéáäéêôęïő üđïôć śńćéÜæïíôáé. Ćßíáé őđćęèőíç ăéá ôçí \n"
+"ćêêßíçóç đïëëțí őđçńćóéțí, üđùò telnet, ftp, rsh êáé rlogin. Ç "
+"áđćíćńăïđïßçóç\n"
+"áőôȚò ôçò őđçńćóßáò áđćíćńăïđïéçèćß ćđßóçò êáé ôéò őđçńćóßćò ăéá ôéò ïđïßćò\n"
+"ćßíáé őđćęèőíç."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Singapore"
-msgstr "Óéăăáđïęńç"
+msgid "the height of the progress bar"
+msgstr "ôï ęűïò ôçò ăńáììȚò đńïüäïő"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sudan"
-msgstr "ÓïőäÜí"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
+"\n"
+" ÁđïèȚêćőóç ìĘóù %s óôïí őđïëïăéóôȚ: %s\n"
-#: ../../lang.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Seychelles"
-msgstr "ÓćûśĘëëćò"
+msgid "Argentina"
+msgstr "ÁńăćíôéíȚ"
-#: ../../lang.pm:1
-#, c-format
-msgid "Solomon Islands"
-msgstr "ÍȚóïé Óïëïìțíôïò"
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
+msgstr ""
+"\n"
+"\n"
+" ÁđïäïśȚ ¶ńíçóç."
-#: ../../lang.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Saudi Arabia"
-msgstr "ÓáïőäéêȚ Áńáâßá"
+msgid "Domain Name Server"
+msgstr "ĆîőđçńćôçôȚò Œíïìá ÔïìĘá"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Rwanda"
-msgstr "ŃïőÜíôá"
+msgid "Security Level:"
+msgstr "Ćđßđćäï áóöáëćßáò:"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Russia"
-msgstr "Ńùóßá"
+msgid "Mount points must begin with a leading /"
+msgstr "Ôï óçìćßï óęíäćóçò đńĘđćé íá îćêéíÜćé ìć /"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Romania"
-msgstr "Ńïőìáíßá"
+msgid "Postfix Mail Server"
+msgstr "ĆîőđçńćôçôȚò Ôáśőäńïìćßïő Postfix"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Reunion"
-msgstr "Ńćïőíéüí"
+msgid "Quit without saving"
+msgstr "žîïäïò śùńßò áđïèȚêćőóç"
#: ../../lang.pm:1
#, c-format
-msgid "Qatar"
-msgstr "ÊáôÜń"
+msgid "Yemen"
+msgstr "ŐćìĘíç"
-#: ../../lang.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Palau"
-msgstr "ĐáëÜïő"
+msgid "This product is available on the MandrakeStore Web site."
+msgstr "Áőôü ôï đńïúüí ćßíáé äéáèĘóéìï óôçí éóôïóćëßäá ôïő MandrakeStore"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Paraguay"
-msgstr "ĐáńáăïőÜç"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr ""
+"Đáńáêáëț ćđéëĘîôć ôï ìĘăéóôï ìĘăćèïò\n"
+"đïő ćđéôńĘđćôáé óôï Drakbackup"
-#: ../../lang.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Portugal"
-msgstr "Đïńôïăáëßá"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Palestine"
-msgstr "ÔìȚìá Splash"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr "=> ŐđÜńśïőí đïëëÜ đńÜăìáôá áđü ôá ïđïßá ìđïńćßôć íá ćđéëĘîćôć (%s).\n"
-#: ../../lang.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Puerto Rico"
-msgstr "ĐïőĘńôï Ńßêï"
+msgid "Hard drive detection"
+msgstr "Ćíôïđéóìüò äßóêïő"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Pitcairn"
-msgstr "ÍȚóïé Đßôêáéńí"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
+"Äćí Ęśćôć ćđéëĘîćé ïìÜäá đáêĘôùí.\n"
+"Đáńáêáëț ćđéëĘîôć ôçí ćëÜśéóôç ćăêáôÜóôáóç đïő èĘëćôć:"
-#: ../../lang.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "Óáéíô Đéćń êáé Ìéêćëüí"
+msgid "Please enter the WebDAV server URL"
+msgstr "Đáńáêáëț ćéóÜăćôć ôçí äéćęèőíóç ôïő ćîőđçńćôçôȚ WebDAV"
#: ../../lang.pm:1
#, c-format
-msgid "Poland"
-msgstr "Đïëùíßá"
+msgid "Tajikistan"
+msgstr "ÔáôæéêéóôÜí"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Pakistan"
-msgstr "ĐáêéóôÜí"
+msgid "Accept"
+msgstr "ÁđïäïśȚ"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Philippines"
-msgstr "Öéëéđđßíćò"
+msgid "Description"
+msgstr "ĐćńéăńáöȚ"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Papua New Guinea"
-msgstr "Đáđïęá-ÍĘá ĂïőúíĘá"
+msgid "Error opening %s for writing: %s"
+msgstr "ÓöÜëìá êáôÜ ôï Üíïéăìá ôïő %s ăéá ćăăńáöȚ: %s"
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "French Polynesia"
-msgstr "ĂáëëéêȚ Đïëőíçóßá"
+msgid "Mouse type: %s\n"
+msgstr "Ôęđïò đïíôéêéïę: %s\n"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Peru"
-msgstr "Đćńïę"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr ""
+"Ç êÜńôá ăńáöéêțí óáò őđïóôçńßæćé ćđéôÜśőíóç ôńéóäéÜóôáôùí ăńáöéêțí óôá XFree "
+"%s."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Panama"
-msgstr "ĐáíáìÜò"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "Đáńáêáëț ïńßóôć ôïí śțńï ôïő CD/DVD "
-#: ../../lang.pm:1
-#, c-format
-msgid "Oman"
-msgstr "ÏìÜí"
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
+msgstr ""
+"\n"
+"\n"
+" ÏìÜäá ćńăáóßáò: śńȚóôçò."
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "New Zealand"
-msgstr "ÍĘá Æçëáíäßá"
+msgid "Expert Area"
+msgstr "ĐćńéïśȚ ĐńïśùńçìĘíùí"
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Niue"
-msgstr "Íßïőć"
+msgid "Choose a monitor"
+msgstr "ĆđéëĘîôć ïèüíç"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Nauru"
-msgstr "Íáïęńïő"
+msgid "Empty label not allowed"
+msgstr "Äćí ćđéôńĘđćôáé Üäćéá ćôéêĘôá"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Nepal"
-msgstr "ÍćđÜë"
+msgid "Maltese (UK)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Nicaragua"
-msgstr "ÍéêáńÜăïőá"
+msgid "I can't add any more partition"
+msgstr "Äćí ìđïńț íá đńïóèĘóù êáôáôìȚóćéò"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Nigeria"
-msgstr "Íéăçńßá"
+msgid "Size in MB: "
+msgstr "ÌĘăćèïò óć MB"
-#: ../../lang.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Norfolk Island"
-msgstr "ÍȚóïé Íüńöïëê"
+msgid "Remote printer"
+msgstr "ÁđïìáêńőóìĘíïò ćêôőđùôȚò"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Niger"
-msgstr "Íßăçńáò"
+msgid "Please choose a language to use."
+msgstr "Đáńáêáëț ćđéëĘîôć ôç ăëțóóá."
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "New Caledonia"
-msgstr "ÍĘá Êáëçäïíßá"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
+"ĐŃÏÓÏŚÇ: ÁőôȚ ç óőóêćőȚ ćßíáé Țäç ńőèìéóìĘíç ăéá íá óőíäĘćôáé ìć ôï "
+"Äéáäßêôőï.\n"
+"ÁđëÜ đáôȚóôć OK ăéá íá êńáôȚóćôć ôéò őđÜńśïőóćò ńőèìßóćéò.\n"
+"ÁëëÜæïíôáò ôá đáńáêÜôù đćäßá èá áëëÜîćôć ôçí őđÜńśïőóá ńęèìéóç."
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Namibia"
-msgstr "Íáìßìđéá"
+msgid "I can set up your computer to automatically log on one user."
+msgstr ""
+"Ìđïńț íá ńőèìßóù ôï óęóôçìÜ óáò Ęôóé țóôć íá óőíäĘćé áőôüìáôá Ęíáí śńȚóôç."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Mozambique"
-msgstr "Ìïæáìâßêç"
+msgid "Floppy format"
+msgstr "ÖïńìÜ ÄéóêĘôáò"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Malaysia"
-msgstr "Ìáëáéóßá"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Mexico"
-msgstr "Ìćîéêü"
+msgid "Generic Printers"
+msgstr "Ăćíéêïß ĆêôőđùôĘò"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Malawi"
-msgstr "ÌáëÜïőé"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
+msgstr ""
+"Đáńáêáëț ćđéëĘîôć ôïí ćêôőđùôȚ óôïí ïđïßï èá áđïóôĘëëïíôáé ïé ćńăáóßćò "
+"ćêôęđùóçò Ț äțóôć ôï üíïìá óőóêćőȚò/áńśćßïő óôç ăńáììȚ ćéóáăùăȚò"
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Maldives"
-msgstr "Ìáëäßâćò"
+msgid "The scanners on this machine are available to other computers"
+msgstr ""
+"Ïé óáńùôĘò áőôïę ôïő ìçśáíȚìáôïò ćßíáé äéáèĘóéìïé óć Üëëïőò őđïëïăéóôĘò"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mauritius"
-msgstr "Ìáőńßêéïò"
+msgid "First sector of the root partition"
+msgstr "Đńțôïò ôïìĘáò ôçò êáôÜôìçóçò ćêêßíçóçò"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Malta"
-msgstr "ÌÜëôá"
+msgid "Alternative drivers"
+msgstr "Ćíáëëáêôéêïß ïäçăïß"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Montserrat"
-msgstr "ÌïíóćńÜô"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
+"\n"
+"Đáńáêáëț ćđéëĘîôć üëćò ôéò ćđéëïăĘò đïő śńćéÜæćóôć.\n"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mauritania"
-msgstr "Ìáőńéôáíßá"
+msgid "Initrd"
+msgstr "Initrd"
#: ../../lang.pm:1
#, c-format
-msgid "Martinique"
-msgstr "Ìáńôéíßêá"
+msgid "Cape Verde"
+msgstr "ĐńÜóéíï ÁêńùôȚńéï"
-#: ../../lang.pm:1
-#, c-format
-msgid "Northern Mariana Islands"
-msgstr "ÍȚóïé Âïńćßùí ÌáńéÜííùí"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr "Áí áőôȚ ç óőóêćőȚ Ęśćé ôï óöÜëìá Cyrix 6x86 Coma"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Mongolia"
-msgstr "Ìïăăïëßá"
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Myanmar"
-msgstr "ÌéáíìÜń"
+msgid "Guam"
+msgstr "ĂêïőÜì"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mali"
-msgstr "ÌÜëé"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
+msgstr ""
+"Đáńáêáëț ćđéëĘîôć ôç èęńá üđïő ćßíáé óőíäćäćìĘíïò ï ćêôőđùôȚ óáò Ț ćéóÜăćôć "
+"Ęíá üíïìá óőóêćőȚò/áńśćßïő óôç ăńáììȚ ćéóáăùăȚò"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Macedonia"
-msgstr "Đńțçí ĂéïőăêïóëáâéêȚ Äçìïêńáôßá ôçò Ìáêćäïíßáò"
+msgid "/Options/Test"
+msgstr "/ĆđéëïăĘò/Ôćóô"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Marshall Islands"
-msgstr "ÍȚóïé ÌÜńóáë"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+"Áőôü ôï ćđßđćäï đńĘđćé íá śńçóéìïđïéçèćß ìć đńïóïśȚ. ÊÜíćé ôï óęóôçìÜ óáò\n"
+"đéï ćęśńçóôï, áëëÜ đïëę ćőáßóèçôï. Äćí đńĘđćé íá śńçóéìïđïéçèćß óć óęóôçìá\n"
+"óőíäćäćìĘíï óôï Äéáäßêôőï Ț LAN. Äćí őđÜńśïőí êùäéêïß đńüóâáóçò."
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Madagascar"
-msgstr "ÌáäáăáóêÜńç"
+msgid "Mounting partition %s"
+msgstr "ĐńïóÜńôçóç êáôÜôìçóçò %s"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Moldova"
-msgstr "Ìïëäáâßá"
+msgid "User name"
+msgstr "Œíïìá śńȚóôç"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Monaco"
-msgstr "Ìïíáêü"
+msgid "New configuration (isdn-light)"
+msgstr "ÍĘá ńęèìéóç (isdn-light)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Morocco"
-msgstr "Ìáńüêï"
+msgid "Userdrake"
+msgstr "Userdrake"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Libya"
-msgstr "Ëéâęç"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "Đïéá êáôÜôìçóç èĘëćôć íá śńçóéìïđïéȚóćôć ăéá ôï Linux4Win;"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Latvia"
-msgstr "Ëćôôïíßá"
+msgid "Backup system"
+msgstr "Áíôßăńáöï Áóöáëćßáò ÓőóôȚìáôïò"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Luxembourg"
-msgstr "Ëïőîćìâïęńăï"
+msgid "Test pages"
+msgstr "ÄïêéìáóôéêĘò óćëßäćò"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lithuania"
-msgstr "Ëéèïőáíßá"
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
+"Ëßóôá ôùí äćäïìĘíùí đńïò ćđáíáöïńÜ:\n"
+"\n"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Lesotho"
-msgstr "Ëćóüôï"
+msgid "Checking %s"
+msgstr "žëćăśïò %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Liberia"
-msgstr "Ëéâćńßá"
+msgid "TCP/Socket Printer Options"
+msgstr "ĆđéëïăĘò ćêôőđùôȚ TCP/Socket"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Sri Lanka"
-msgstr "Óńé ËÜíêá"
+msgid "Card mem (DMA)"
+msgstr "DMA êÜńôáò"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Liechtenstein"
-msgstr "ËéśôćíóôÜéí"
+msgid "France"
+msgstr "Ăáëëßá"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Saint Lucia"
-msgstr "¶ăéïò ËïőêÜò"
+msgid "browse"
+msgstr "áíáæȚôçóç"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lebanon"
-msgstr "Ëßâáíïò"
+msgid "Checking installed software..."
+msgstr "'žëćăśïò ćăêáôćóôçìĘíùí đńïăńáììÜôùí..."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Laos"
-msgstr "ËÜïò"
+msgid "Remote printer name missing!"
+msgstr "Ôï áđïìáêńőóìĘíï üíïìá ćêôőđùôȚ ëćßđćé!"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Kazakhstan"
-msgstr "ÊáæáêóôÜí"
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr ""
+"ÈĘëćôć íá ćíćńăïđïéȚóćôć ôçí ćêôęđùóç óć ćêôőđùôĘò óôï ôïđéêü óáò äßêôőï;\n"
#: ../../lang.pm:1
#, c-format
-msgid "Cayman Islands"
-msgstr "ÍȚóïé ÊĘőìáí"
+msgid "Turkey"
+msgstr "Ôïőńêßá"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Kuwait"
-msgstr "ÊïőâĘéô"
+msgid "Alcatel speedtouch usb"
+msgstr "Alcatel speedtouch usb"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Korea"
-msgstr "ÊïńĘá"
+msgid "Number of buttons"
+msgstr "Áńéèìüò đëȚêôńùí"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Korea (North)"
-msgstr "ÊïńĘá (Âüńćéá)"
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "ÂéćôíÜì \"numeric row\" QWERTY"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "Óáéíô Êéôò êáé ÍĘâéò"
+msgid "Module"
+msgstr "¶ńèńùìá"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Comoros"
-msgstr "Êïìüńćò"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
+msgstr ""
+"Ćđßóçò ćńăáóßćò đïő äćí äçìéïőńăȚèçêáí ìć áőôü ôï đńüăńáììá Ț ôï \"foomatic-"
+"configure\" äćí ìđïńïęí íá ìćôáöćńèïęí."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Kiribati"
-msgstr "ÊéńéìđÜôé"
+msgid "Hardware"
+msgstr "Őëéêü"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Cambodia"
-msgstr "Êáìđüôæç"
+msgid "Ctrl and Alt keys simultaneously"
+msgstr "Ôáőôüśńïíá ôá đëȚêôńá Ctrl êáé Alt"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Kyrgyzstan"
-msgstr "ÊéńăéóôÜí"
+msgid "United States"
+msgstr "Ç.Đ.Á."
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Kenya"
-msgstr "ÊĘíőá"
+msgid "Default OS?"
+msgstr "Ćî ïńéóìïę ëćéôïőńăéêü;"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Japan"
-msgstr "Éáđùíßá"
+msgid "Swiss (German layout)"
+msgstr "Ćëâćôéêü (ĂćńìáíéêȚ äéÜôáîç)"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Jordan"
-msgstr "Éïńäáíßá"
+msgid "Configure all heads independently"
+msgstr "Ńęèìéóç üëùí ôùí êćöáëțí áíćîÜńôçôá"
-#: ../../lang.pm:1
-#, c-format
-msgid "Jamaica"
-msgstr "ÔæáìÜéêá"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr "áíéśíćęèçêć."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Iceland"
-msgstr "Éóëáíäßá"
+msgid "NTP Server"
+msgstr "ĆîőđçńćôçôȚò NTP"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Iran"
-msgstr "ÉńÜí"
+msgid "Load/Save on floppy"
+msgstr "Öüńôùóç/ÁđïèȚêćőóç óć äéóêĘôá"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Iraq"
-msgstr "ÉńÜê"
+msgid "This theme does not yet have a bootsplash in %s !"
+msgstr "Áőôü ôï èĘìá äćí Ęśćé áêüìá êÜđïéï bootsplash óôï %s !"
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "ÂńćôáíéêÜ ĆäÜöç Éíäéêïę Ùêćáíïę"
+msgid "nice"
+msgstr "êáëü"
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "India"
-msgstr "Éíäßá"
+msgid "Leaving in %d seconds"
+msgstr "žîïäïò óć %d äćőôćńüëćđôá"
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Israel"
-msgstr "ÉóńáȚë"
+msgid "Please choose which serial port your modem is connected to."
+msgstr "Óć đïéá óćéńéáêȚ đüńôá ćßíáé óőíäćäćìĘíï ôï ìüíôćì óáò;"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Ireland"
-msgstr "Éńëáíäßá"
+msgid "Country"
+msgstr "Śțńá"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Indonesia"
-msgstr "Éíäïíçóßá"
+msgid "Property"
+msgstr "Éäéüôçôá"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Hungary"
-msgstr "Ïőăăáńßá"
+msgid "Ghostscript"
+msgstr "Ghostscript"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Haiti"
-msgstr "ÁúôȚ"
+msgid "LAN Configuration"
+msgstr "Ńęèìéóç LÁÍ"
#: ../../lang.pm:1
#, c-format
-msgid "Croatia"
-msgstr "Êńïáôßá"
+msgid "Ghana"
+msgstr "ĂêÜíá"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Honduras"
-msgstr "Ïíäïęńá"
+msgid "Path or Module required"
+msgstr "Ç ÈĘóç Ț ôï ¶ńèńùìá áđáéôćßôáé"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Íçóß Śćńíô êáé ÍȚóïé ÌáêÍôüíáëíô"
+msgid "Advanced Options"
+msgstr "ĐńïśùńçìĘíćò ĆđéëïăĘò"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Hong Kong"
-msgstr "Śïíăê Êïíăê"
+msgid "Coma bug"
+msgstr "ÓöÜëìá Coma"
-#: ../../lang.pm:1
-#, c-format
-msgid "China"
-msgstr "Êßíá"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
+"\n"
+" Linux\n"
+" Linux\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" IDE\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" ¶ëëá\n"
+"\n"
+" ÁđïèȚêćőóç\n"
+"\n"
+"\n"
+"\n"
+" ĆđáíáöïńÜ\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" ìćôÜ âßáò\n"
+"\n"
+"\n"
+"\n"
+" Ïäçăüò\n"
+"\n"
+"\n"
+"\n"
+" Áíáßńćóç\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" Ïëïêëçńțèçêć\n"
+"\n"
+"\n"
+" Đüôć\n"
+"\n"
+"\n"
+"\n"
+" Ïëïêëçńțèçêć\n"
+"\n"
+" Đüôć\n"
+"\n"
+" íĘï\n"
+"\n"
+" ÄéáăńáöȚ\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" HFS\n"
+"\n"
+"\n"
+"\n"
+"."
-#: ../../lang.pm:1
-#, c-format
-msgid "Guyana"
-msgstr "ĂïőéÜíá"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" ćîőđçńćôçôȚò\n"
+"."
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Guinea-Bissau"
-msgstr "ĂïőúíĘá-ÌđéóÜïő"
+msgid "There was an error installing packages:"
+msgstr "ĐńïêëȚèçêć óöÜëìá êáôÜ ôçí ćăêáôÜóôáóç ôùí đáêĘôùí:"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Guam"
-msgstr "ĂêïőÜì"
+msgid "Lexmark inkjet configuration"
+msgstr "Ńőèìßóćéò ćêôőđùôȚ ìćëÜíçò Lexmark"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Guatemala"
-msgstr "ĂïőáôćìÜëá"
+msgid "Undo"
+msgstr "Áíáßńćóç"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "Íüôéá Ăćùńăßá êáé Íüôéá ÍçóéÜ ÓÜíôïőéôò"
+msgid "Save partition table"
+msgstr "ÁđïèȚêćőóç đßíáêá êáôáôìȚóćùí"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Equatorial Guinea"
-msgstr "ÉóçìćńéíȚ ĂïőúíĘá"
+msgid "Finnish"
+msgstr "Öéíëáíäéêü"
#: ../../lang.pm:1
#, c-format
-msgid "Guadeloupe"
-msgstr "Ăïőáäćëïęđç"
+msgid "Macedonia"
+msgstr "Đńțçí ĂéïőăêïóëáâéêȚ Äçìïêńáôßá ôçò Ìáêćäïíßáò"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Guinea"
-msgstr "ĂïőéíĘá"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
+"Ôï êïéíüśńçóôï áíÜ śńȚóôç êÜíćé śńȚóç ôçò ïìÜäáò \"fileshare\". \n"
+"Ìđïńćßôć íá ôçí đńïóèĘóćôć óôïí êÜèć śńȚóôç óć áőôȚ ôçí ïìÜäá ìć ôï "
+"userdrake."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Gambia"
-msgstr "ĂêÜìđéá"
+msgid "Slovenian"
+msgstr "Óëïâćíßáò"
#: ../../lang.pm:1
#, c-format
-msgid "Greenland"
-msgstr "Ăńïéëáíäßá"
+msgid "Libya"
+msgstr "Ëéâęç"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Gibraltar"
-msgstr "ĂéâńáëôÜń"
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr "Ńęèìéóç, ćăêáôÜóôáóç ëïăéóìéêïę, ćêêßíçóç ćîőđçńćôçôțí..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Ghana"
-msgstr "ĂêÜíá"
+msgid ""
+"\n"
+"- Burn to CD"
+msgstr ""
+"\n"
+"- ĆăăńáöȚ óć CD"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "French Guiana"
-msgstr "ĂáëëéêȚ ĂïőéÜíá"
+msgid "Table"
+msgstr "Đßíáêáò"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Georgia"
-msgstr "Ăćùńăßá"
+msgid "I don't know how to format %s in type %s"
+msgstr "äćí îĘńù đțò íá ìïńöïđïéȚóù ôï %s óć ôęđï %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Grenada"
-msgstr "ĂńćíÜäá"
+msgid "Model"
+msgstr "ÌïíôĘëï"
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "United Kingdom"
-msgstr "ÇíùìĘíï Âáóßëćéï"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Gabon"
-msgstr "Ăêáìđüí"
+msgid "Stop Server"
+msgstr "Ôćńìáôéóìüò ĆîőđçńćôçôȚ"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Faroe Islands"
-msgstr "ÍȚóïé Öćńüćò"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
+msgstr ""
+"\n"
+"ĆđéëĘîôć ôï èĘìá \n"
+"ăéá ôï lilo êáé ôï\n"
+"bootsplash, ìđïńćßôć\n"
+"íá ôá ćđéëĘîćôć êáé\n"
+"îćśùńéóôÜ"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Micronesia"
-msgstr "Ìéêńïíçóßá"
+msgid "Modem"
+msgstr "Ìüíôćì"
-#: ../../lang.pm:1
-#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "ÍȚóïé Öțêëáíô (Ìáëâßíćò)"
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
+msgstr ""
+"\n"
+"\n"
+" Ïëïêëçńțèçêć\n"
+"\n"
+"."
#: ../../lang.pm:1
#, c-format
-msgid "Fiji"
-msgstr "Ößôæé"
+msgid "Tuvalu"
+msgstr "Ôïőâáëïę"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "Finland"
-msgstr "Öéíëáíäßá"
+msgid "Use auto detection"
+msgstr "ŚńȚóç áőôüìáôçò áíßśíćőóçò"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Ethiopia"
-msgstr "Áéèéïđßá"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr ""
+"Ôï GPM đńïóèĘôćé őđïóôȚńéîç đïíôéêéïę óć ćöáńìïăĘò âáóéóìĘíćò óć êïíóüëá\n"
+"êćéìĘíïő êáé ćđéôńĘđćé ëćéôïőńăßćò áđïêïđȚò êáé ćđéêüëëçóçò ìć śńȚóç \n"
+"đïíôéêéïę óôçí êïíóüëá, êáèțò êáé őđïóôȚńéîç áíáäőïìĘíùí ìćíïę."
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Spain"
-msgstr "Éóđáíßá"
+msgid "Started on boot"
+msgstr "Îćêßíçóáí óôçí ćêêßíçóç"
-#: ../../lang.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
+#, fuzzy, c-format
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
+msgstr "Linux:"
+
+#: ../../standalone/draksec:1
#, c-format
-msgid "Eritrea"
-msgstr "Ćńőèńáßá"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
+msgstr ""
+"Ïé đáńáêÜôù ćđéëïăĘò áóöáëćßáò ìđïńïęí íá ćđéëćăïęí\n"
+"ăéá ôçí đńïóáńìïăȚ ôçò áóöÜëćéáò. Ăéá ćđćîçăȚóćéò äćßôć ôçí âïȚèćéá.\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Western Sahara"
-msgstr "ÄőôéêȚ ÓáśÜńá"
+msgid "Automatically find available printers on remote machines"
+msgstr "Âńćßôć áőôüìáôá äéáèĘóéìïőò ćêôőđùôĘò óć áđïìáêńőóìĘíá ìçśáíȚìáôá"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Egypt"
-msgstr "Áßăőđôïò"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
+"\n"
+" ÁđïèȚêćőóç óć Ôáéíßá óôç óőóêćőȚ: %s"
#: ../../lang.pm:1
#, c-format
-msgid "Estonia"
-msgstr "Ćóèïíßá"
+msgid "East Timor"
+msgstr "Áíáôïëéêü Ôéìüń"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Ecuador"
-msgstr "Éóçìćńéíüò"
+msgid "Del profile..."
+msgstr "ÄéáăńáöȚ đńïößë..."
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Algeria"
-msgstr "Áëăćńßá"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Dominican Republic"
-msgstr "ÄïìéíéêáíȚ Äçìïêńáôßá"
+msgid "Installing Foomatic..."
+msgstr "ĆăêáôÜóôáóç Foomatic..."
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Dominica"
-msgstr "Íôïìßíéêá"
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "Đáńáêáëț áđïóőíäćèćßôć êáé ìćôÜ đáôȚóôć Ctrl-Alt-BackSpace"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Denmark"
-msgstr "Äáíßá"
+msgid "detected"
+msgstr "áíéśíćęèçêć"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Djibouti"
-msgstr "Ôæéìđïőôß"
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr "Ôï äßêôőï đńĘđćé íá ćđáíćêêéíçèćß, ÈĘëćôć íá ôï ćđáíćêêéíȚóćôć ;"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Cyprus"
-msgstr "Êęđńïò"
+msgid "Package: "
+msgstr "ĐáêĘôï:"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Christmas Island"
-msgstr "ÍȚóïé ŚńéóôïőăĘííùí"
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr "Áäőíáìßá ćăăńáöȚò ôïő /etc/sysconfig/bootsplash."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Cape Verde"
-msgstr "ĐńÜóéíï ÁêńùôȚńéï"
+msgid "SECURITY WARNING!"
+msgstr "ĐŃÏĆÉÄÏĐÏÉÇÓÇ ÁÓÖÁËĆÉÁÓ!"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Cuba"
-msgstr "Êïęâá"
+msgid "StarOffice"
+msgstr "StarOffice"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Colombia"
-msgstr "Êïëïìâßá"
+msgid "No, I don't want autologin"
+msgstr "Œśé, äćí ćđéèőìț áőôüìáôç đńïóđĘëáóç"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Cameroon"
-msgstr "Êáìćńïęí"
+msgid "Windows Migration tool"
+msgstr "Ćńăáëćßï ÌćôÜâáóçò Windows "
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Chile"
-msgstr "ŚéëȚ"
+msgid "All languages"
+msgstr "Œëćò ïé ăëțóóćò"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cook Islands"
-msgstr "ÍȚóïé Êïőê"
+msgid "Removing %s"
+msgstr "Áöáßńćóç %s"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Cote d'Ivoire"
-msgstr "ÁêôȚ Ćëćöáíôïóôïę"
+msgid "Testing your connection..."
+msgstr "ÄïêéìȚ óęíäćóçò... "
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Switzerland"
-msgstr "Ćëâćôßá"
+msgid "Cache size"
+msgstr "ìĘăćèïò Cache"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Congo (Brazzaville)"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
msgstr ""
+"Ôțńá őđÜńśïőí êùäéêïß đńüóâáóçò, áëëÜ ç śńȚóç ôïő óőóôȚìáôïò óć äßêôőï áêüìá "
+"äćí óőíßóôáôáé."
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Central African Republic"
-msgstr "Äçìïêńáôßá ÊćíôńéêȚò ÁöńéêȚò"
+msgid "Start sector: "
+msgstr "Áńśéêüò ôïìĘáò: "
#: ../../lang.pm:1
#, c-format
-msgid "Congo (Kinshasa)"
+msgid "Congo (Brazzaville)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "ÍȚóïé Êüêïò (ÊȚëéíăê)"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr "Ôï đáêĘôï %s đńĘđćé íá áíáâáèìéóôćß. ÈĘëćôć íá ôï ćăêáôáóôȚóćôć;"
#: ../../lang.pm:1
#, c-format
-msgid "Canada"
-msgstr "ÊáíáäÜò"
+msgid "Seychelles"
+msgstr "ÓćûśĘëëćò"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Belize"
-msgstr "Ìđćëßæ"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
+msgstr ""
+"Ôï Printerdrake óőíĘêńéíć ôï üíïìá ôïő ìïíôĘëïő áđü ôïí áőôüìáôï ćíôïđéóìü "
+"ìć ôç ëßóôá ôùí ìïíôĘëùí áđü ôçí âÜóç äćäïìĘíùí ćêôőđùôțí ăéá íá ôçí "
+"êáëęôćńç ćđéëïăȚ. ÁőôȚ ç ćđéëïăȚ ìđïńćß íá ćßíáé ëÜèïò, ćéäéêÜ ćÜí ï "
+"ćêôőđùôȚò óáò äćí ćßíáé êáôáśùńçìĘíïò óôçí âÜóç äćäïìĘíùí. Äćßôć ëïéđüí áí ç "
+"ćđéëïăȚ ôïő ćêôőđùôȚ ćßíáé óùóôȚ êáé êÜíôć êëéê óôï \"Ôï ìïíôĘëï ćßíáé óùóôü"
+"\" ćÜí üśé êÜíôć êëéê óôï \"ĆđéëĘîôć ôï ìïíôĘëï śćéńïêßíçôá\" ăéá íá "
+"ćđéëĘîćôć śćéńïêßíçôá ôï ìïíôĘëï áđü ôçí ćđüìćíç ïèüíç\n"
+"Ăéá ôïí ćêôőđùôȚ óáò ôï Printerdrake âńȚêć:\n"
+"\n"
+"%s"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belarus"
-msgstr "Ëćőêïńùóßá"
+msgid "Bad password on %s"
+msgstr "ĆóöáëìĘíïò êùäéêüò óôï %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Botswana"
-msgstr "ÌđïôóïőÜíá"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
+msgstr ""
+"\n"
+"žíáò Üăíùóôïò ćêôőđùôȚò ćßíáé óőíäćìĘíïò áđćőèćßáò óôï óęóôçìÜ óáò"
#: ../../lang.pm:1
#, c-format
-msgid "Bouvet Island"
-msgstr "ÍȚóïò ÌđïőâĘ"
+msgid "Zambia"
+msgstr "ÆÜìđéá"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Bhutan"
-msgstr "ÌđïőôÜí"
+msgid "Security Administrator (login or email)"
+msgstr "ÄéáśćéńéóôȚò Áóöáëćßáò (đńïóđĘëáóç Ț ôáśőäńïìćßï)"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Bahamas"
-msgstr "ÌđáśÜìćò"
+msgid "Sorry, we support only 2.4 kernels."
+msgstr "ËőđÜìáé, őđïóôçńßæïíôáé ìüíï ïé đőńȚíćò 2.4"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Brazil"
-msgstr "Âńáæéëßá"
+msgid "Romanian (qwerty)"
+msgstr "Ńïőìáíéêü (qwerty)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bolivia"
-msgstr "Âïëéâßá"
+msgid "Under Devel ... please wait."
+msgstr "Őđü ÁíÜđôőîç ... đáńáêáëț đćńéìĘíćôć."
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Brunei Darussalam"
-msgstr "ÌđńïőíĘé ÍôáńïőóáëÜì"
+msgid "Czech Republic"
+msgstr "ÔóĘśéêç Äçìïêńáôßá"
#: ../../lang.pm:1
#, c-format
-msgid "Bermuda"
-msgstr "Âćńìïęäćò"
+msgid "Egypt"
+msgstr "Áßăőđôïò"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Benin"
-msgstr "Ìđćíßí"
+msgid "Old configuration (isdn4net)"
+msgstr "ĐáëéÜ ńęèìéóç (isdn4net)"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Burundi"
-msgstr "Ìđïőńïęíôé"
+msgid "Sound card"
+msgstr "ÊÜńôá Țśïő"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Bahrain"
-msgstr "ÌđáśńĘéí"
+msgid "Import Fonts"
+msgstr "ĆéóáăùăȚ Ăńáììáôïóćéńțí"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Bulgaria"
-msgstr "Âïőëăáńßá"
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+"žśćôć ìéá ìćăÜëç êáôÜôìçóç ôùí MicroSoft Windows \n"
+"Đńïôćßíù đńțôá íá áëëÜîćôć ôï ìĘăćèüò ôçò\n"
+"(ÊÜíôć êëéê ćđÜíù ôçò êáé ćđéëĘîôć \"ÁëëáăȚ ÌćăĘèïőò\")"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Burkina Faso"
-msgstr "Ìđïőńêßíá ÖÜóï"
+msgid "Suppress Temporary Files"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Bangladesh"
-msgstr "ÌđáíăêëáíôĘò"
+msgid "Change partition type"
+msgstr "ÁëëáăȚ ôęđïő êáôÜôìçóçò"
-#: ../../lang.pm:1
-#, c-format
-msgid "Barbados"
-msgstr "ÌđáńìđÜíôïò"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
+"ÁíÜëőóç\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"."
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Âïóíßá-Ćńæćăïâßíç"
+msgid "Network Options"
+msgstr "ĆđéëïăĘò Äéêôęïő"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Azerbaijan"
-msgstr "ÁæćńìđáúôæÜí"
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
+"ĆìöÜíéóç èĘìáôïò\n"
+"óôçí êïíóüëá"
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Aruba"
-msgstr "Áńïęìđá"
+msgid "Statistics"
+msgstr "ÓôáôéóôéêÜ"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Australia"
-msgstr "Áőóôńáëßá"
+msgid "(on %s)"
+msgstr "(óôïí %s)"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "American Samoa"
-msgstr "ÁìćńéêáíéêȚ Óáìüá"
+msgid "MM Series"
+msgstr "MM Series"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Argentina"
-msgstr "ÁńăćíôéíȚ"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Antarctica"
-msgstr "ÁíôáńêôéêȚ"
+msgid "average"
+msgstr "ìĘóïò üńïò"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Angola"
-msgstr "Áăêüëá"
+msgid "New printer name"
+msgstr "ÊáíĘíá üíïìá ćêôőđùôȚ"
#: ../../lang.pm:1
#, c-format
-msgid "Netherlands Antilles"
-msgstr "ÏëëáíäéêĘò Áíôßëëćò"
+msgid "Equatorial Guinea"
+msgstr "ÉóçìćńéíȚ ĂïőúíĘá"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Armenia"
-msgstr "Áńìćíßá"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Albania"
-msgstr "Áëâáíßá"
+msgid "Build Backup"
+msgstr "Äçìéïőńăßá áíôéăńÜöùí áóöáëćßáò"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Anguilla"
-msgstr "Áăêßëá"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
+"Ăéá íá ćêôőđțóćôć áđü ôç ăńáììȚ ćíôïëțí (đáńÜèőńï ôćńìáôéêïę) êÜíôć śńȚóç "
+"ôçò ćíôïëȚò \"%s <áńśćßï>\" Ț \"%s<áńśćßï>\".\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Áíôßăêïőá êáé Ìđáńìđïęíôá"
+msgid "Currently, no alternative possibility is available"
+msgstr "Đńïò ôï đáńüí äćí őđÜńśćé Üëëç ćíáëëáêôéêȚ"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "United Arab Emirates"
-msgstr "ÇíùìĘíá ÁńáâéêÜ ĆìéńÜôá"
+msgid "Romanian (qwertz)"
+msgstr "Ńïőìáíéêü (qwertz)"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Andorra"
-msgstr "Áíäüńá"
+msgid "Write Config"
+msgstr "ĆăăńáöȚ Ńęèìéóçò"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Afghanistan"
-msgstr "ÁöăáíéóôÜí"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+"Ç őđçńćóßá routed ćđéôńĘđćé ôçí áőôüìáôç ćíçìĘńùóç ôïő đßíáêá äńïìïëüăçóçò \n"
+"IP ìĘóù ôïő đńùôïêüëëïő RIP. Đáń' üëï đïő ôï RIP ćßíáé ćőńĘùò äéáäćäïìĘíï "
+"óć \n"
+"ìéêńÜ äßêôőá, ìćăáëęôćńá äßêôőá áđáéôïęí đćńéđëïêüôćńá đńùôüêïëëá."
#: ../../lang.pm:1
#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
-
-#: ../../loopback.pm:1
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "ÊőêëéêĘò óőíäĘóćéò %s\n"
-
-#: ../../lvm.pm:1
-#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "ÁöáéńĘóôć đńțôá ôéò ëïăéêĘò ìïíÜäćò\n"
+msgid "Kiribati"
+msgstr "ÊéńéìđÜôé"
-#: ../../modules.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
msgstr ""
-"Äćí őđÜńśćé đëĘïí őđïóôȚńéîç PCMCIA ăéá ôïőò đőńȚíćò 2.2. ÊÜíôć śńȚóç ôïő "
-"đőńȚíá 2.4."
-#: ../../mouse.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "ÊÉÍÇÓÔĆ ÔÏ ŃÏÄÁÊÉ!"
+msgid "Browse"
+msgstr "ÁíáæȚôçóç"
-#: ../../mouse.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "To activate the mouse,"
-msgstr "Ăéá ćíćńăïđïßçóç đïíôéêéïę"
+msgid "CDROM"
+msgstr "CDROM"
-#: ../../mouse.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Please test the mouse"
-msgstr "Đáńáêáëț äïêéìÜóôć ôï đïíôßêé"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "ÈĘëćôć íá äïêéìÜóćôć íá óőíäćèćßôć óôï Äéáäßêôőï ôțńá;"
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No mouse"
-msgstr "Śùńßò đïíôßêé"
+msgid "Belgian"
+msgstr "Âćëăéêü"
-#: ../../mouse.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "none"
-msgstr "êáíĘíá"
+msgid "Do you have an ISA sound card?"
+msgstr "žśćôć êÜńôá Țśïő ISA;"
-#: ../../mouse.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "3 buttons"
-msgstr "Ôńéțí đëȚêôńùí"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
+msgstr ""
+"Äćí âńĘèçêć đńïóáńìïăĘáò äéêôęïő Ethernet óôï óęóôçìÜ óáò.\n"
+"Äćí ìđïńț íá ńőèìßóù áőôïę ôïő ôęđïő ôç óęíäćóç."
-#: ../../mouse.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "2 buttons"
-msgstr "Äęï đëȚêôńùí"
+msgid "Windows"
+msgstr "Windows "
-#: ../../mouse.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "1 button"
-msgstr "1 đëȚêôńïő"
+msgid "Can't make screenshots before partitioning"
+msgstr "Áäęíáôç ç ëȚűç óôéăìéïôęđùí đńéí áđü ôçí äçìéïőńăßá êáôáôìȚóćùí"
-#: ../../mouse.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "busmouse"
-msgstr "busmouse"
+msgid "Host Name"
+msgstr "Œíïìá ÓőóôȚìáôïò"
-#: ../../mouse.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid "/File/Save _As"
+msgstr "/Áńśćßï/ÁđïèȚêćőóç _Ùò"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (óćéńéáêü, đáëéüò C7 ôęđïò)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr "CUPS CUPS Œëá Printerdrake CUPS ćîőđçńćôçôȚò ćîőđçńćôçôȚò."
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr ""
+"ôï %s äćí ćßíáé óôç âÜóç äćäïìĘíùí ôùí óáńùôțí, íá ńőèìéóôćß śćéńïêßíçôá;"
-#: ../../mouse.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "MM Series"
-msgstr "MM Series"
+msgid "Delay before booting default image"
+msgstr "ÊáèőóôĘńçóç đńéí ôçí ćêêßíçóç"
-#: ../../mouse.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid "Restrict command line options"
+msgstr "Áđáăüńćőóç ćđéëïățí ăńáììȚò ćíôïëȚò"
-#: ../../mouse.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "East Europe"
+msgstr "ÁíáôïëéêȚ Ćőńțđç"
-#: ../../mouse.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+msgid "Use free space"
+msgstr "ŚńȚóç ćëćęèćńïő śțńïő"
-#: ../../mouse.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid "use dhcp"
+msgstr "śńȚóç dhcp"
-#: ../../mouse.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "Mail alert"
+msgstr "Ćéäïđïßçóç Ôáśőäńïìćßïő"
-#: ../../mouse.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Ăćíéêïę ôęđïő ìć 3 đëȚêôńá"
+msgid "Internet configuration"
+msgstr "Ńőèìßóćéò Äéáäéêôęïő"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Ăćíéêïę ôęđïő ìć 2 đëȚêôńá"
+msgid "Uzbekistan"
+msgstr "ÏőæìđćêéóôÜí"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "serial"
-msgstr "óćéńéáêü"
+msgid "Detected %s"
+msgstr "ÂńĘèçêć ï %s"
-#: ../../mouse.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
+msgid "/Autodetect _printers"
+msgstr "/Ćíôïđéóìüò _ćêôőđùôțí"
-#: ../../mouse.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "Wheel"
-msgstr "Ìć ńïäÜêé"
+msgid "Finish"
+msgstr "ÔĘëïò"
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Generic"
-msgstr "ĂćíéêȚ"
+msgid "Show automatically selected packages"
+msgstr "Áőôüìáôç đńïâïëȚ ćđéëćăìĘíùí đáêĘôùí"
-#: ../../mouse.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid "CPU flags reported by the kernel"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+msgid "Togo"
+msgstr "Ôüăêï"
-#: ../../mouse.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Ăćíéêïę ôęđïő đïíôßêé PS2 ìć ńïäÜêé"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr "ÊÜôé äćí đȚăć êáëÜ! Ćßíáé ôï mkisofs ćăêáôćóôçìĘíï;"
-#: ../../mouse.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+msgid "16 MB"
+msgstr "16 MB"
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Standard"
-msgstr "Ôőđéêü"
+msgid "Please try again"
+msgstr "Đáńáêáëț đńïóđáèȚóôć îáíÜ"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - Mouse"
+msgid "The model is correct"
+msgstr "Ôï ìïíôĘëï ćßíáé óùóôü"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "ĆíáëëáăȚ ìćôáîę ćđßđćäçò êáé ïìáäéêȚò ôáîéíüìçóçò"
+msgid "FAT resizing failed: %s"
+msgstr "ÁëëáăȚ ìćăĘèïőò FAT áđĘôőść: %s"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Collapse Tree"
-msgstr "Óęìđôőîç äĘíôńïő"
+msgid "Individual package selection"
+msgstr "ĆđéëïăȚ îćśùńéóôțí đáêĘôùí"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Expand Tree"
-msgstr "ÁíÜđôőîç äĘíôńïő"
+msgid "This partition is not resizeable"
+msgstr "ÁőôȚ ç êáôÜôìçóç äćí ìđïńćß í' áëëÜîćé ìĘăćèïò."
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Info"
-msgstr "Đëçńïöïńßćò"
+msgid "Location"
+msgstr "Ôïđïèćóßá"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Is this correct?"
-msgstr "Óùóôü;"
+msgid "USA (cable-hrc)"
+msgstr ""
-#: ../../my_gtk.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgid "Journalised FS"
+msgstr "Journalised FS"
-#: ../../partition_table.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Error writing to file %s"
-msgstr "ÓöÜëìá ćăăńáöȚò óôï áńśćßï %s"
+msgid "Guatemala"
+msgstr "ĂïőáôćìÜëá"
-#: ../../partition_table.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Bad backup file"
-msgstr "ÊáôćóôńáììĘíï ćöćäńéêü áńśćßï"
+msgid "This machine"
+msgstr "Áőôü ôï ìçśÜíçìá"
-#: ../../partition_table.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Ç ćđáíáöïńÜ áđü ôï áńśćßï %s áđĘôőść: %s"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "Đéèáíü DOS ăńÜììá äßóêïő: %s \n"
-#: ../../partition_table.pm:1
-#, c-format
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select the files or directories and click on 'OK'"
msgstr ""
-"ŐđÜńśćé Ęíá êćíü óôïí đßíáêá êáôáôìȚóćùí ìá äćí ìđïńț íá ôï śńçóéìïđïéȚóù.\n"
-"Ç ìïíáäéêȚ ëęóç ćßíáé íá ìćôáêéíȚóćôć ôéò đńùôćęïőóćò êáôáôìȚóćéò óáò Ęôóé "
-"țóôć ôï êćíü íá âńćèćß äßđëá óôçí ćêôćôáìĘíç êáôÜôìçóç"
+"Đáńáêáëț ćđéëĘîôć ôá áńśćßá Ț ôïőò êáôáëüăïőò êáé êÜíôć êëéê óôï 'đńïóèȚêç'"
-#: ../../partition_table.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Ç ćêôćôáìĘíç êáôÜôìçóç äćí őđïóôçńßæćôáé óć áőôüí ôïí ôęđï óőóôȚìáôïò"
+msgid "Bahrain"
+msgstr "ÌđáśńĘéí"
-#: ../../partition_table.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "mount failed: "
-msgstr "óęíäćóç áđĘôőść: "
+msgid "omit scsi modules"
+msgstr "đáńÜëćéűç ôùí áńèńùìÜôùí scsi"
-#: ../../pkgs.pm:1
-#, c-format
-msgid "maybe"
-msgstr "ßóùò"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr "ÏéêïăĘíćéá ôïő ćđćîćńăáóôȚ (đ.ś. 6 ăéá êëÜóç i686)"
-#: ../../pkgs.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "nice"
-msgstr "êáëü"
+msgid ""
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
+msgstr ""
+"ĆđćéäȚ êÜíćôć ìéá äéêôőáêȚ ćăêáôÜóôáóç, ôï äßêôőï ćßíáé Țäç ńőèìéóìĘíï.\n"
+"ÊÜíôć êëéê óôï ĆíôÜîćé ăéá íá äéáôçńȚóćôć ôéò ńőèìßóćéò óáò, Ț Üêőńï ăéá íá "
+"îáíáńőèìßóćôć ôç óęíäćóç óôï Äéáäßêôőï.\n"
-#: ../../pkgs.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "very nice"
-msgstr "đïëę êáëü"
+msgid "Keyboard layout: %s\n"
+msgstr "ÄéÜôáîç đëçêôńïëïăßïő: %s\n"
-#: ../../pkgs.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "important"
-msgstr "óçìáíôéêü"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
+"Ćäț ìđïńćßôć íá ćđéëĘîćôć áí ïé óőíäćìĘíïé ćêôőđùôĘò áőôïę ôï ìçśáíȚìáôïò èá "
+"ćßíáé đńïóâÜóéìïé áđü áđïìáêńőóìĘíá ìçśáíȚìáôá êáé áđü đïéá."
-#: ../../pkgs.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "must have"
-msgstr "đńĘđćé íá őđÜńśćé"
+msgid "Maltese (US)"
+msgstr ""
-#: ../../raid.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Äćí őđÜńśïőí áńêćôĘò êáôáôìȚóćéò ăéá RAID ćđéđĘäïő %d\n"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"ÓőíäĘćé êáé áđïóőíäĘćé üëá ôá äéêôőáêÜ óőóôȚìáôá áńśćßùí (NFS), SMB (Lan\n"
+"Manager/Windows), êáé NCP (NetWare) "
-#: ../../raid.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "mkraid failed"
-msgstr "áđïôőśßá mkraid"
+msgid "Tvcard"
+msgstr "ÊÜńôá TV"
-#: ../../raid.pm:1
-#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "áđïôőśßá mkraid (ìȚđùò áđïőóéÜæïőí ôá raidtools;)"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Toggle between normal/expert mode"
+msgstr "ÁëëáăȚ óć êáíïíéêü ôńüđï ëćéôïőńăßáò"
-#: ../../raid.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Äćí ìđïńț íá đńïóèĘóù êáôÜôìçóç óôï _ìïńöïđïéçìĘíï_ RAID md%d"
+msgid "Size"
+msgstr "ÌĘăćèïò"
-#: ../../services.pm:1
-#, c-format
-msgid "Stop"
-msgstr "Ôćńìáôéóìüò"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "GRUB"
+msgstr "GB"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Start"
-msgstr "Ćêêßíçóç"
+msgid "Greenland"
+msgstr "Ăńïéëáíäßá"
-#: ../../services.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "On boot"
-msgstr "Óôçí ćêêßíçóç"
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"No additional information\n"
-"about this service, sorry."
+msgid "Not the correct tape label. Tape is labelled %s."
msgstr ""
-"Śùńßò ćđéđëĘïí đëçńïöïńßćò\n"
-"ăéá áőôȚ ôçí őđçńćóßá."
-#: ../../services.pm:1
-#, c-format
-msgid "Services and deamons"
-msgstr "Őđçńćóßćò êáé äáßìïíćò"
-
-#: ../../services.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "stopped"
-msgstr "äćí ćêôćëćßôáé"
+msgid ""
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
+msgstr ""
+"Ç ńęèìéóç ôçò êïéíȚò óęíäćóçò ôïő Äéáäéêôęïő Ęśćé Țäç ăßíćé.\n"
+"ÁőôȚ ôç óôéăìȚ ćßíáé ćíćńăȚ.\n"
+"\n"
+"Ôé èĘëćôć íá êÜíćôć;"
-#: ../../services.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "running"
-msgstr "ćêôćëćßôáé"
+msgid "Delete All NBIs"
+msgstr "ÄéáăńáöȚ Œëùí ôùí NBIs"
-#: ../../services.pm:1
-#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "ĆđéëĘîôć ôéò őđçńćóßćò đïő èá îćêéíïęí áőôüìáôá êáôÜ ôçí ćêêßíçóç"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
+msgstr ""
+"\n"
+"\n"
+" ŚńȚóç đńïăńÜììáôïò ćêêßíçóçò\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" Root óőóêćőȚ ćî' ïńéóìïę\n"
+"\n"
+"\n"
+"\n"
+" ćî' ïńéóìïę\n"
+" śńȚóôçò\n"
+" ćî' ïńéóìïę\n"
+"\n"
+"\n"
+" ĐáńÜëćéűç Linux\n"
+"\n"
+"\n"
+" Ăéá ĐńïśùńçìĘíïőò\n"
+" śńȚóôçò."
-#: ../../services.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Database Server"
-msgstr "ĆîőđçńćôçôȚò ÂÜóçò ÄćäïìĘíùí"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
+msgstr ""
+"áí íáé, áđïóôïëȚ ôçò áíáöïńÜò ôáśőäńïìćßïő óć áőôȚí ôçí äéćęèőíóç Ț áëëéțò "
+"óôïí root."
-#: ../../services.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Remote Administration"
-msgstr "ÁđïìáêńőóìĘíç äéáśćßńéóç"
+msgid "Which configuration of XFree do you want to have?"
+msgstr "Ôé ńęèìéóç XFree èĘëćôć íá Ęśćôć;"
-#: ../../services.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "File sharing"
-msgstr "Êïéíüśńçóôá áńśćßá"
+msgid "More"
+msgstr "¶ëëá"
-#: ../../services.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Internet"
-msgstr "Äéáäßêôőï"
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+"Ìć áőôü ôï ćđßđćäï áóöáëćßáò ćßíáé äőíáôȚ ç śńȚóç ôïő óőóôȚìáôïò óôï ùò "
+"ćîőđçńćôçôȚ.\n"
+"Ç áóöÜëćéá ćßíáé áńêćôÜ őűçëȚ țóôć íá äĘśćôáé ôáőôüśńïíćò óőíäĘóćéò áđü "
+"đïëëïęò đćëÜôćò.\n"
+"Óçì: Áí ôï ìçśÜíçìá ćßíáé ìüíï ăéá ôçí śńȚóç ùò đćëÜôç óôï Äéáäßêôőï ôüôć "
+"êáëęôćńá íá ćđéëĘîćôć śáìçëüôćńï ćđßđćäï áóöÜëćéáò"
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Printing"
-msgstr "Ćêôęđùóç"
+msgid "Account Password"
+msgstr "Êùäéêüò Đńüóâáóçò"
-#: ../../services.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
msgstr ""
-"ÎćêéíÜćé ôçí őđçńćóßá ćîőđçńćôçôȚ ăńáììáôïóćéńțí X (áőôü ćßíáé áđáńáßôçôï "
-"ăéá íá ćêôćëćóôćß ôï XFree)."
+"ĆđéëĘîáôć íá ćăêáôáóôȚóćôć ôï đńüăńáììá ćêêßíçóçò óć ìéá êáôÜôìçóç.\n"
+"Ćííïćßôć üôé Ęśćôć Țäç ćăêáôÜóôáóç Ęíá Üëëï đńüăńáììá ćêêßíçóçò óôïí óêëçńü "
+"óáò äßóêï (đ.ś. System Commander).\n"
+"\n"
+"Áđü đïéüí äßóêï îćêéíÜôć;"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Öüńôùóç ôùí ïäçățí ăéá ôéò usb óőóêćőĘò óáò."
+msgid "Tajik keyboard"
+msgstr ""
-#: ../../services.pm:1
-#, c-format
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
-msgstr ""
-"Ôï Syslog ćßíáé ç őđçńćóßá đïő śńçóéìïđïéïęí đïëëĘò Üëëćò őđçńćóßćò \n"
-"ăéá íá êÜíïőí ćăăńáöĘò óôá áńśćßá đáńáêïëïęèçóçò óőóôȚìáôïò (log files)\n"
-"Óőíßóôáôáé ç óőíćśȚò ëćéôïőńăßá áőôȚò ôçò őđçńćóßáò."
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
+msgstr "Ïëïêëçńțèçêć Œëá ćî' ïńéóìïę\n"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Ćêêßíçóç ôïő óőóôȚìáôïò Țśïő óôï ìçśÜíçìÜ óáò"
+msgid "Font List"
+msgstr "Ëßóôá Ăńáììáôïóćéńțí"
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
msgstr ""
-"Ôï đńùôüêïëëï rwho ćđéôńĘđćé óć áđïìáêńőóìĘíïőò śńȚóôćò íá äïőí Ęíáí \n"
-"êáôÜëïăï ôùí śńçóôțí ôïő óőóôȚìáôïò (đáńüìïéï ìć ôï finger)."
+"Ìđïńćß íá śńćéáóôćß íá áëëÜîćôć ôçí Open Firmware boot-óőóêćőȚ țóôć íá\n"
+" ćíćńăïđïéȚóćôć ôï đńüăńáììá ćêêßíçóçò. Áí óôçí ćđáíćêêßíçóç äćí äćßôć ôçí "
+"đńïôńïđȚ ôïő đńüăńáììá ćêêßíçóçò,\n"
+"đáôȚóôć ôï Command-Option-O-F êáôÜ ôçí ćđáíćêêßíçóç êáé ćéóÜăćôć:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" ÌćôÜ ăńÜűôć: shut-down\n"
+"Óôçí ćđüìćíç ćêêßíçóç èá đńĘđćé íá äćßôć ôçí đńïôńïđȚ ôïő đńïăńÜììáôïò "
+"ćêêßíçóçò ."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
msgstr ""
-"Ôï đńùôüêïëëï rusers ćđéôńĘđćé óôïőò śńȚóôćò ćíüò äéêôęïő íá \n"
-"đńïóäéïńßóïőí ôïőò óőíäćäćìĘíïőò śńȚóôćò Üëëùí óőóôçìÜôùí."
+"Öáßíćôáé đùò Ęśćôć Ęíá Áńśáßï Ț ¶ăíùóôï\n"
+"ìçśÜíçìá, ï yaboot bootloader äćí èá äïőëĘűćé ăéá óáò.\n"
+"Ç ćăêáôÜóôáóç èá óőíćśéóôćß, áëëÜ\n"
+"èá śńćéáóôćß íá śńçóéìïđïéȚóćôć ôï BootX ăéá íá îćêéíȚóćôć ôï ìçśÜíçìÜ óáò"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Ôï đńùôüêïëëï rstat ćđéôńĘđćé óôïőò śńȚóôćò ćíüò äéêôęïő ôçí\n"
-"óőëëïăȚ ìćôńȚóćùí ćđéäüóćùí ăéá ïđïéïäȚđïôć óęóôçìá óć áőôü \n"
-"ôï äßêôőï."
+msgid "Select file"
+msgstr "ĆđéëĘîôć áńśćßï"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
+"Choose the network or host on which the local printers should be made "
+"available:"
msgstr ""
-"Ç őđçńćóßá routed ćđéôńĘđćé ôçí áőôüìáôç ćíçìĘńùóç ôïő đßíáêá äńïìïëüăçóçò \n"
-"IP ìĘóù ôïő đńùôïêüëëïő RIP. Đáń' üëï đïő ôï RIP ćßíáé ćőńĘùò äéáäćäïìĘíï "
-"óć \n"
-"ìéêńÜ äßêôőá, ìćăáëęôćńá äßêôőá áđáéôïęí đćńéđëïêüôćńá đńùôüêïëëá."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
msgstr ""
-"Ïńéóìüò raw óőóêćőțí ùò block óőóêćőțí (üđùò êáôáôìȚóćéò óêëçńțí\n"
-"äßóêùí), ăéá ôç śńȚóç ôïőò áđü ćöáńìïăĘò üđùò ç Oracle Ț óőóêćőĘò DVD"
+"Ôéò ćíôïëĘò áőôĘò ìđïńćßôć ćđßóçò íá ôéò śńçóéìïđïéȚóćôć óôï đćäßï \"ĆíôïëȚ "
+"ćêôőđțóćùí\" ôùí äéáëüăùí ćêôőđțóćùí óć đïëëĘò ćöáńìïăĘò, áëëÜ ìçí đáńĘśćôć "
+"ôï üíïìá áńśćßïő ćäț ćđćéäȚ ôï áńśćßï đńïò ćêôęđùóç ôï đáńĘśćé ç ćöáńìïăȚ.\n"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Áđïèçêćęćé êáé ćđáíáöĘńćé ôçí đçăȚ ćíôńïđßáò ôïő óőóôȚìáôïò ăéá \n"
-"ôçí äçìéïőńăßá êáëęôćńçò đïéüôçôáò ôőśáßùí áńéèìțí."
+msgid "Japan"
+msgstr "Éáđùíßá"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Ôï postfix ćßíáé Ęíá đńüăńáììá ìćôáöïńÜò áëëçëïăńáößáò, ôï \n"
-"đńüăńáììá đïő öńïíôßæćé ăéá ôçí ìćôáöïńÜ áëëçëïăńáößáò áđü ôï \n"
-"Ęíá óęóôçìá óôï Üëëï."
+msgid "Print option list"
+msgstr "Ćêôęđùóç ëßóôá ćđéëïățí"
-#: ../../services.pm:1
+#: ../../standalone/localedrake:1
#, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Ï portmapper äéáśćéńßæćôáé óőíäĘóćéò RPC, ïé ïđïßćò śńçóéìïđïéïęíôáé\n"
-"áđü đńùôüêïëëá üđùò ôï NFS êáé ôï NIS. ĐńĘđćé íá ćßíáé ćíćńăïđïéçìĘíï óć \n"
-"óőóôȚìáôá đïő äńïőí ùò ćîőđçńćôçôĘò ôĘôïéùí đńùôïêüëëùí."
+msgid "The change is done, but to be effective you must logout"
+msgstr "Ç áëëáăȚ Ęăéíć, áëëÜ ăéá íá éóśęóćé èá đńĘđćé íá ăßíćé áđïóęíäćóç"
-#: ../../services.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Ç őđïóôȚńéîç PCMCIA đńïóöĘńćé őđïóôȚńéîç ăéá êÜńôćò äéêôęïő, ìüíôćì êëđ \n"
-"óőíȚèùò óć óőóôȚìáôá laptop. Äćí èá ćêêéíȚóćé ćêôüò áí áőôü æçôçèćß áđü "
-"ôïí \n"
-"śńȚóôç, ïđüôć ćßíáé áóöáëĘò íá ćăêáôáóôáèćß óć óőóôȚìáôá đïő äćí ôï "
-"śńćéÜæïíôáé."
+msgid "Search servers"
+msgstr "ÁíáæȚôçóç äéáêïìéóôțí"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "ŐđïóôȚńéîç ôùí OKI 4w êáé óőìâáôțí winprinters."
+msgid "NCP queue name missing!"
+msgstr "Ôï üíïìá ôçò NCP ïőńÜò ëćßđćé!"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
+"Warning, another internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"Áőôüìáôç ćíćńăïđïßçóç ôïő numlock đëȚêôńïő óôçí êïíóüëá\n"
-"êáé ôï XFree êáôÜ ôçí ćêêßíçóç ôïő óőóôȚìáôïò."
+"ĐńïóïśȚ áíéśíćęèçêć ìéá Üëëç óęíäćóç óôï äéáäßêôőï, đïő ßóùò śńçóéìïđïéćß ôï "
+"äßêôőü óáò"
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"Ôï NFS ćßíáé Ęíá äçìïöéëĘò đńùôüêïëëï ăéá ôïí äéáìïéńáóìü áńśćßùí óć \n"
-"äßêôőá TCP/IP. ÁőôȚ ç őđçńćóßá đńïóöĘńćé ëćéôïőńăßćò êëćéäțìáôïò áńśćßùí."
+msgid "Cd-Rom labeled \"%s\""
+msgstr "Cd-Rom ïíüìáôé \"%s\""
#: ../../services.pm:1
#, c-format
msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
msgstr ""
-"Ôï NFS ćßíáé Ęíá äçìïöéëĘò đńùôüêïëëï ăéá ôïí äéáìïéńáóìü áńśćßùí óć \n"
-"äßêôőá TCP/IP. ÁőôȚ ç őđçńćóßá đńïóöĘńćé ëćéôïőńăßćò ćîőđçńćôçôȚ, ï \n"
-"ïđïßïò ńőèìßæćôáé áđü ôï áńśćßï /etc/exports."
+"Áđïèçêćęćé êáé ćđáíáöĘńćé ôçí đçăȚ ćíôńïđßáò ôïő óőóôȚìáôïò ăéá \n"
+"ôçí äçìéïőńăßá êáëęôćńçò đïéüôçôáò ôőśáßùí áńéèìțí."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
msgstr ""
-"Ćíćńăïđïéćß/áđćíćńăïđïéćß üëá ôá őđïóőóôȚìáôá äéêôęïő đïő Ęśïőí \n"
-"ńőèìéóôćß íá îćêéíïęí êáôÜ ôçí ćêêßíçóç."
+"ÁđĘôőść ï Ęëćăśïò ôïő óőóôȚìáôïò áńśćßùí %s. ÈĘëćôć íá ćđéóêćőÜóćôć ôá "
+"óöÜëìáôá; (đńïóïśȚ, ìđïńćß íá śÜóćôć äćäïìĘíá)"
-#: ../../services.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"ÓőíäĘćé êáé áđïóőíäĘćé üëá ôá äéêôőáêÜ óőóôȚìáôá áńśćßùí (NFS), SMB (Lan\n"
-"Manager/Windows), êáé NCP (NetWare) "
+msgid "Turn your computer into a reliable server"
+msgstr "ÌćôáôńĘűôć ôï ìçśÜíçìÜ óáò óć Ęíáí áîéüđéóôï äéáêïìéóôȚ"
-#: ../../services.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"Ï named (BIND) ćßíáé Ęíáò ĆîőđçńćôçôȚò Ïíüìáôïò ÔïìĘá (DNS) đïő "
-"śńçóéìïđïéćßôáé\n"
-"ăéá íá ìćôáôńĘđćé ïíüìáôá óć äéćőèęíóćéò IP."
+msgid " (driver %s)"
+msgstr " (ïäçăüò %s)"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
+"Loopback file(s):\n"
+" %s\n"
msgstr ""
-"Linux Virtual Server, śńçóéìïđïéćßôáé ăéá íá äçìéïőńăȚóćé Ęíáí őűçëȚò\n"
-"áđüäïóçò êáé äéáèćóéìüôçôáò ćîőđçńćôçôȚ."
+"Áńśćßï (á) loopback:\n"
+" %s\n"
-#: ../../services.pm:1
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "I don't know"
+msgstr "Äćí îĘńù"
+
+#: ../../printer/main.pm:1
#, c-format
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr ", TCP/IP host \"%s\", èęńá %s"
+
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
msgstr ""
-"Ôï lpd ćßíáé ç őđçńćóßá ćêôőđțóćùí đïő áđáéôćßôáé ăéá íá ëćéôïőńăćß \n"
-"ç ćíôïëȚ lpd. Ćßíáé âáóéêÜ Ęíáò ćîőđçńćôçôȚò đïő đńïùèćß ôá áńśćßá \n"
-"óôïőò ćêôőđùôĘò."
+"ĆăêáôÜóôáóç\n"
+"\n"
+" Ćđáíáöüńôùóç\n"
+"\n"
+"\n"
+"\n"
+" Ïëïêëçńțèçêć?"
-#: ../../services.pm:1
-#, c-format
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
msgstr ""
-"Ôï Linuxconf êáìéÜ öïńÜ êÜíćé äéÜöïńćò ćńăáóßćò\n"
-"êáôÜ ôçí ćêêßíçóç ôïő óőóôȚìáôïò ăéá íá äéáôçńȚóćé ôç ńęèìéóç ôïő óőóôȚìáôïò."
+"\n"
+"\n"
+" ćî' ïńéóìïę"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
+msgid "Post Uninstall"
msgstr ""
-"Áőôüìáôç áíßśíćőóç êáé ńęèìéóç óőóêćőțí êáôÜ ôçí ćêêßíçóç ôïő óőóôȚìáôïò."
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Áőôüìáôç đáńáăùăȚ ôçò ćđéêćöáëßäáò ôïő đőńȚíá óôï /boot ăéá ôï\n"
-"/usr/include/linux/{autoconf,version}.h"
+msgid " ("
+msgstr " ("
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Áőôü ôï đáêĘôï öïńôțíćé ôçí ćđéëćăìĘíç äéÜôáîç đëçêôńïëïăßïő đïő Ęśćé \n"
-"ćđéëćăćß óôï /etc/sysconfig/keyboard. Áőôü ìđïńćß íá ńőèìéóôćß ìć ôçí \n"
-"śńȚóç ôïő ćńăáëćßïő kbdconfig. ĐńĘđćé óśćäüí đÜíôá íá ćßíáé ćíćńăïđïéçìĘíï."
+msgid "Cpuid level"
+msgstr "Ćđßđćäï Cpuid"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Ćêêßíçóç đáêĘôïő ößëôńïő ăéá ôïí đőńȚíá Linux ôçò óćéńÜò 2.2, ăéá ôçí "
-"ńęèìéóç\n"
-"ćíüò Ôïßśïőò Đńïóôáóßáò đïő èá đńïóôáôćęćé ôï ìçśÜíçìÜ óáò áđü äéêôőáêĘò "
-"ćđéèĘóćéò."
+msgid "Mongolian (cyrillic)"
+msgstr "Ìïăăïëéêü (ÊőńéëëéêȚ)"
-#: ../../services.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Ç őđçńćóßá őđćńćîőđçńćôçôȚ Äéáäéêôęïő (inetd) îćêéíÜćé ìéá đïéêéëßá\n"
-"Üëëùí őđçńćóéțí äéáäéêôęïő üđïôć śńćéÜæïíôáé. Ćßíáé őđćęèőíç ăéá ôçí \n"
-"ćêêßíçóç đïëëțí őđçńćóéțí, üđùò telnet, ftp, rsh êáé rlogin. Ç "
-"áđćíćńăïđïßçóç\n"
-"áőôȚò ôçò őđçńćóßáò áđćíćńăïđïéçèćß ćđßóçò êáé ôéò őđçńćóßćò ăéá ôéò ïđïßćò\n"
-"ćßíáé őđćęèőíç."
+msgid "Add a module"
+msgstr "ĐńïóèȚêç áńèńțìáôïò"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Ï Apache ćßíáé Ęíáò ćîőđçńćôçôȚò WWW. Ìđïńćß íá ćîőđçńćôȚóćé áńśćßá\n"
-"HTML êáé CGI."
+msgid "Profile to delete:"
+msgstr "Đńïößë ăéá äéáăńáöȚ:"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"Ôï HardDrake ôńĘśćé ìéá áíßśíćőóç őëéêïę êáé đńïáéńćôéêÜ ńőèìßæćé\n"
-"ôï íĘï/áëëáăìĘíï őëéêü."
+msgid "Local measure"
+msgstr "ÔïđéêȚ ìĘôńçóç"
-#: ../../services.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"Ôï GPM đńïóèĘôćé őđïóôȚńéîç đïíôéêéïę óć ćöáńìïăĘò âáóéóìĘíćò óć êïíóüëá\n"
-"êćéìĘíïő êáé ćđéôńĘđćé ëćéôïőńăßćò áđïêïđȚò êáé ćđéêüëëçóçò ìć śńȚóç \n"
-"đïíôéêéïę óôçí êïíóüëá, êáèțò êáé őđïóôȚńéîç áíáäőïìĘíùí ìćíïę."
+msgid "busmouse"
+msgstr "busmouse"
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Ôï cron ćßíáé ìéá âáóéêȚ őđçńćóßá UNIX đïő ôńĘśćé ćíôïëĘò êáèïńéóìĘíćò áđü \n"
-"ôïí śńȚóôç óć ôáêôÜ śńïíéêÜ äéáóôȚìáôá. Ôï vixie cron đńïóèĘôćé Ęíáí "
-"áńéèìü \n"
-"ćđéđëĘïí äőíáôïôȚôùí đïő đćńéëáìâÜíïőí êáëęôćńç áóöÜëćéá êáé đéï éóśőńĘò "
-"ńőèìßóćéò."
+msgid "Account Login (user name)"
+msgstr "Ëïăáńéáóìüò Óęíäćóçò (üíïìá śńȚóôç)"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Ćêôćëćß ćíôïëĘò đńïăńáììáôéóìĘíćò áđü ôçí ćíôïëȚ at êáé äĘóìćò ćíôïëțí\n"
-"üôáí ï öüńôïò ôïő óőóôȚìáôïò ćßíáé áńêćôÜ śáìçëüò."
+msgid "Fdiv bug"
+msgstr "ÓöÜëìá Fdiv"
-#: ../../services.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
msgstr ""
-"Ôï apmd đáńáêïëïőèćß êáé êáôáăńÜöćé ôçí êáôÜóôáóç ôçò ìđáôáńßáò.\n"
-"Ìđïńćß ćđßóçò íá śńçóéìïđïéçèćß ăéá ôï áőôüìáôï êëćßóéìï ôïő óőóôȚìáôïò óć \n"
-"đćńßđôùóç śáìçëȚò öüńôéóçò ôçò ìđáôáńßáò."
+"ŃőèìéóôȚò drakfirewall\n"
+"\n"
+"Âćâáéùèćßôć üôé Ęśćôć ńőèìßóćé ôï Äßêôőï/Đńüóâáóç Äéáäéêôęïő ìć ôç śńȚóç ôïő "
+"drakconnect đńéí đńïśùńȚóćôć."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron, Ęíá đńüăńáììá đćńéïäéêȚò ćêôĘëćóçò ćíôïëțí."
+msgid "Benin"
+msgstr "Ìđćíßí"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Ćêêßíçóç ôïő ALSA (Advanced Linux Sound Architecture) óőóôȚìáôïò Țśïő"
+msgid "Uruguay"
+msgstr "ÏőńïőăïőÜç"
-#: ../../standalone.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Installing packages..."
-msgstr "ĆăêáôÜóôáóç đáêĘôùí..."
+msgid "Path selection"
+msgstr "ĆđéëïăȚ ÈĘóçò"
-#: ../../standalone.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-msgstr ""
-"\n"
-"ŚńȚóç: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+msgid "Name/IP address of host:"
+msgstr "Œíïìá/IP äéćęèőíóç ôïő őđïëïăéóôȚ:"
-#: ../../standalone.pm:1
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Monitor: %s\n"
+msgstr "Ïèüíç: %s\n"
+
+#: ../../partition_table/raw.pm:1
#, c-format
msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
msgstr ""
+"ÊÜôé êáêü óőìâáßíćé óôï äßóêï óáò. \n"
+"žíá ôćóô ćëĘăśïő ôçò áêćńáéüôçôáò ôùí äćäïìĘíùí áđĘôőść. \n"
+"Áőôü óçìáßíćé đùò ç ïđïéáäȚđïôć ćăăńáöȚ óôï äßóêï èá êáôáëȚîćé óáí ôőśáßá "
+"óêïőđßäéá."
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+msgid "Printer host name or IP missing!"
+msgstr "Ôï äéêôőáêü üíïìá ôïő ćêôőđùôȚ Ț ôï IP ëćßđćé!"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please check all users that you want to include in your backup."
msgstr ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+"Đáńáêáëț ćđéëĘîôć üóïőò śńȚóôćò èĘëćôć íá őđÜńśïőí óôá áíôßăńáöá áóöáëćßáò"
-#: ../../standalone.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
msgstr ""
+"Ôï %s đńĘđćé íá ńőèìéóôćß áđü ôï printerdrake.\n"
+"Ìđïńćßôć íá ćêêéíȚóćôć ôï printerdrake áđü ôï ÊĘíôńï ĆëĘăśïő Mandrake áđü ôï "
+"ôìȚìá Őëéêü."
-#: ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "Bangladesh"
+msgstr "ÌđáíăêëáíôĘò"
-#: ../../standalone.pm:1
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "Japan (cable)"
+msgstr "Éáđùíßá (ÊáëùäéáêȚ)"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
"\n"
-" Äßêôőï Äéáäßêôőï\n"
+" ĆêôőđùôȚò Ïäçăüò\n"
"\n"
-" ćî' ïńéóìïę\n"
+" ÔïìĘáò Windows \n"
"\n"
+" áíéśíćęèçêć ÔïìĘáò Windows \n"
"\n"
-" ìćôÜ âßáò ìćôÜ âßáò\n"
+" ÔïìĘáò Windows \n"
"\n"
-"."
+" Ćđüìćíï ¶êőńï."
-#: ../../standalone.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgid "Initial tests"
+msgstr "ÁńśéêÜ ôćóô"
-#: ../../standalone.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "[keyboard]"
-msgstr "[đëçêôńïëüăéï]"
+msgid "Continue"
+msgstr "ÓőíĘśćéá"
-#: ../../standalone.pm:1
-#, fuzzy, c-format
-msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
-msgstr ""
-"\n"
-" ĆîőđçńćôçôȚò\n"
-" ćíćńăïđïßçóç ćíćńăïđïßçóç\n"
-" áđćíćńăïđïßçóç áđćíćńăïđïßçóç\n"
-"\n"
-"\n"
-" śńȚóôçò\n"
-" ÄéáăńáöȚ śńȚóôçò\n"
-"\n"
-" ÄéáăńáöȚ"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Custom Restore"
+msgstr "ĐńïóáńìïóìĘíç ĆđáíáöïńÜ"
-#: ../../standalone.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
msgstr ""
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" êáíĘíá\n"
+"áíéśíćęèçêć\n"
"\n"
"\n"
"."
-#: ../../standalone.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Script-based"
+msgstr "ŚńȚóç script"
+
+#: ../../install_any.pm:1 ../../partition_table.pm:1
+#, c-format
+msgid "Error reading file %s"
+msgstr "ÓöÜëìá êáôÜ ôçí áíÜăíùóç ôïő áńśćßïő %s"
+
+#: ../../harddrake/v4l.pm:1
+#, c-format
+msgid "PLL setting:"
+msgstr "Ńőèìßóćéò PLL:"
+
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#, c-format
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "ĐńĘđćé íá Ęśćôć ìéá êáôÜôìçóç FAT mounted óôï /boot/efi"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid " on "
+msgstr " óôï "
+
+#: ../../diskdrake/dav.pm:1
+#, c-format
+msgid "The URL must begin with http:// or https://"
+msgstr "Ç äéćęèőíóç đńĘđćé íá îćêéíÜ ìć http:// Ț https://"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
msgstr ""
+"Ìđïńćßôć íá ïńßóćôć êáôćőèćßáí ôï URI ăéá ôçí đńüóâáóç óôïí ćêôőđùôȚ. Ôï URI "
+"đńĘđćé íá ôçńćß ćßôć ôéò CUPS ćßôć ôéò Foomatic đńïäéáăńáöĘò. Œśé đùò äćí "
+"őđïóôçńßæïíôáé üëïé ïé URI ôęđïé áđü üëá ôá spoolers."
+
+#: ../../any.pm:1
+#, c-format
+msgid "Other OS (SunOS...)"
+msgstr "¶ëëï ëćéôïőńăéêü (SunOS...)"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Install/Upgrade"
+msgstr "ĆăêáôÜóôáóç/ÁíáâÜèìéóç"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "%d packages"
+msgstr "%d đáêĘôá"
#: ../../standalone.pm:1
#, fuzzy, c-format
@@ -7216,1673 +6704,1928 @@ msgstr ""
"\n"
"\n"
-#: ../../standalone.pm:1
-#, fuzzy, c-format
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Domain Authentication Required"
+msgstr "Áđáéôćßôáé Đéóôïđïßçóç ÔïìĘá"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
-"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
-"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-msgstr ""
-"\n"
-" ĂćíéêÜ ¶äćéá\n"
-"\n"
-"\n"
"\n"
"\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
"\n"
+msgstr ""
"\n"
-" ĂćíéêÜ ¶äćéá\n"
"\n"
-" ëçöèĘíôá ĂćíéêÜ ¶äćéá\n"
+" Ćőśáńéóôïęìć:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
"\n"
-#: ../../steps.pm:1
-#, c-format
-msgid "Exit install"
-msgstr "žîïäïò"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Install updates"
-msgstr "Áíáâáèìßóćéò"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Configure services"
-msgstr "Ńęèìéóç őđçńćóéțí"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Configure X"
-msgstr "Ńęèìéóç Ś"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Install bootloader"
-msgstr "Đńüăńáììá ćêêßíçóçò"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Configure networking"
-msgstr "Ńęèìéóç äéêôęïő"
-
-#: ../../steps.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Add a user"
-msgstr "ĐńïóèȚêç śńȚóôç"
+msgid "Costa Rica"
+msgstr "Êüóôá Ńßêá"
-#: ../../steps.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Root password"
-msgstr "Êùäéêüò Root"
+msgid "Use libsafe for servers"
+msgstr "ŚńȚóç libsafe ăéá äéáêïìéóôĘò"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Install system"
-msgstr "ĆăêáôÜóôáóç óőóôȚìáôïò"
+msgid "Icelandic"
+msgstr "Éóëáíäéêü"
-#: ../../steps.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Choose packages to install"
-msgstr "ĆđéëïăȚ đáêĘôùí"
+msgid ""
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
+"\n"
+"ŚńȚóç: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
-#: ../../steps.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Format partitions"
-msgstr "Ìïńöïđ. êáôáôìȚó."
+msgid "Please relog into %s to activate the changes"
+msgstr "Đáńáêáëț ćđáíáóőíäćèćßôć ùò %s ăéá ćíćńăïđïßçóç ôùí áëëáățí"
-#: ../../steps.pm:1
+#: ../../my_gtk.pm:1
#, c-format
-msgid "Partitioning"
-msgstr "Êáôáìćńéóìüò"
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-#: ../../steps.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Choose your keyboard"
-msgstr "ĆđéëĘîôć đëçêôńïëüăéï"
+msgid "Lilo/grub mode"
+msgstr "Ëćéôïőńăßá Lilo/grub"
-#: ../../steps.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Select installation class"
-msgstr "ĆđéëĘîôć ćăêáôÜóôáóç"
+msgid "Output"
+msgstr "žîïäïò"
-#: ../../steps.pm:1
+#: ../../loopback.pm:1
#, c-format
-msgid "Hard drive detection"
-msgstr "Ćíôïđéóìüò äßóêïő"
+msgid "Circular mounts %s\n"
+msgstr "ÊőêëéêĘò óőíäĘóćéò %s\n"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configure mouse"
-msgstr "Ńęèìéóç đïíôéêéïę"
+msgid "Martinique"
+msgstr "Ìáńôéíßêá"
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "License"
-msgstr "¶äćéá ŚńȚóçò"
+msgid "HardDrive / NFS"
+msgstr "Óêëçńüò Äßóêïò / NFS"
-#: ../../steps.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Language"
-msgstr "ĆđéëĘîôć ăëțóóá"
+msgid "a number"
+msgstr "Ęíáò áńéèìüò"
-#: ../../ugtk2.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "utopia 25"
-msgstr "utopia 25"
+msgid "Swedish"
+msgstr "Óïőçäéêü"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "OK"
-msgstr "ĆíôÜîćé"
+msgid "Which %s driver should I try?"
+msgstr "Đïéüí ïäçăü %s íá äïêéìÜóù;"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "logdrake"
-msgstr "logdrake"
+msgid ""
+"You will receive an alert if one of the selected services is no longer "
+"running"
+msgstr ""
+"Èá ëÜâćôć ìéá ćéäïđïßçóç ćÜí ìéá áđü ôéò ćđéëćăìĘíćò őđçńćóßćò đÜűćé íá "
+"ćêôćëćßôáé"
-#: ../../ugtk.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgid "Filesystem types:"
+msgstr "Ôęđïé óőóôȚìáôïò áńśćßùí:"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (ïäçăüò đńïâïëȚò ćăêáôÜóôáóçò)"
+msgid ", multi-function device on HP JetDirect"
+msgstr ", đïëőśńçóôéêȚ óőóêćőȚ óôï HP JetDirect"
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Ç êÜńôá ăńáöéêțí óáò őđïóôçńßæćé ćđéôÜśőíóç ôńéóäéÜóôáôùí ăńáöéêțí óôá XFree "
-"%s,\n"
-"ĐŃÏÓÏŚÇ: ĐĆÉŃÁÌÁÔÉÊÇ ŐĐÏÓÔÇŃÉÎÇ - ÌĐÏŃĆÉ ÍÁ ĐÁĂÙÓĆÉ ÔÏÍ ŐĐÏËÏĂÉÓÔÇ ÓÁÓ."
+msgid "Northern Mariana Islands"
+msgstr "ÍȚóïé Âïńćßùí ÌáńéÜííùí"
-#: ../../Xconfig/card.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s ìć ĐĆÉŃÁÌÁÔÉÊÇ ćđéôÜśőíóç ôńéóäéÜóôáôùí ăńáöéêțí"
+msgid "none"
+msgstr "êáíĘíá"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"Ç êÜńôá ăńáöéêțí óáò őđïóôçńßæćé ćđéôÜśőíóç ôńéóäéÜóôáôùí ăńáöéêțí óôá XFree "
-"%s."
+msgid "user :"
+msgstr "śńȚóôçò :"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s ìć ćđéôÜśőíóç ôńéóäéÜóôáôùí ăńáöéêțí"
+msgid "Please enter your password"
+msgstr "Đáńáêáëț ćéóÜăćôć ôïí êùäéêü đńüóâáóçò"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
msgstr ""
-"Ç êÜńôá ăńáöéêțí óáò őđïóôçńßæćé ćđéôÜśőíóç ôńéóäéÜóôáôùí ăńáöéêțí ìüíï ìć "
-"ôá XFree %s.\n"
-"ĐŃÏÓÏŚÇ: ĐĆÉŃÁÌÁÔÉÊÇ ŐĐÏÓÔÇŃÉÎÇ - ÌĐÏŃĆÉ ÍÁ ĐÁĂÙÓĆÉ ÔÏÍ ŐĐÏËÏĂÉÓÔÇ ÓÁÓ!\n"
-"Ç êÜńôá óáò őđïóôçńßæćôáé áđü ôá XFree %s ôá ïđïßá ìđïńćß íá äßíïőí êáëęôćńç "
-"őđïóôȚńéîç ăéá äéäéÜóôáôá ăńáöéêÜ"
+"Œíïìá ăéá ôï đńïößë đïő èá äçìéïőńăçèćß (ôï íĘï đńïößë äçìéïőńăćßôáé óáí "
+"áíôßăńáöï ôïő őđÜńśïíôïò):"
-#: ../../Xconfig/card.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Ç êÜńôá ăńáöéêțí óáò őđïóôçńßæćé ćđéôÜśőíóç ôńéóäéÜóôáôùí ăńáöéêțí ìüíï ìć "
-"ôá XFree %s.\n"
-"Ç êÜńôá óáò őđïóôçńßæćôáé áđü ôá XFree %s ôá ïđïßá ìđïńćß íá äßíïőí êáëęôćńç "
-"őđïóôȚńéîç ăéá äéäéÜóôáôá ăńáöéêÜ."
+msgid "Floppy"
+msgstr "ÄéóêĘôá"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "RW"
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Ńęèìéóç ìüíï ôçò êÜńôáò \"%s\" %s"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Ghostscript referencing"
+msgstr "Ghostscript"
-#: ../../Xconfig/card.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use Xinerama extension"
-msgstr "ŚńȚóç ćđĘêôáóçò Xinerama"
+msgid "Bootloader"
+msgstr "ĐńïăńÜììáôïò ćêêßíçóçò"
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configure all heads independently"
-msgstr "Ńęèìéóç üëùí ôùí êćöáëțí áíćîÜńôçôá"
+msgid "Move"
+msgstr "Ìćôáêßíçóç"
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Ôé ńęèìéóç XFree èĘëćôć íá Ęśćôć;"
+msgid "Bootloader to use"
+msgstr "ŚńȚóç đńïăńÜììáôïò ćêêßíçóçò"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "XFree configuration"
-msgstr "Ńőèìßóćéò XFree"
+msgid "SMB server host"
+msgstr "Äéêôőáêü üíïìá SMB ćîőđçńćôçôȚ"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "ĆđéëĘîôć ôï ìĘăćèïò ìíȚìçò ôçò êÜńôáò ăńáöéêțí"
+msgid "Name Servers:"
+msgstr "Œíïìá Ćîőđçńćôçôțí:"
-#: ../../Xconfig/card.pm:1
+#: ../../install_messages.pm:1
#, fuzzy, c-format
msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
msgstr ""
"\n"
-" Ôé?"
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Multi-head configuration"
-msgstr "Ńęèìéóç đïëëțí êćöáëțí"
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Choose an X server"
-msgstr "ĆđéëĘîôć ôïí ćîőđçńćôçôȚ Ś"
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "X server"
-msgstr "ćîőđçńćôçôȚò X"
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "64 MB or more"
-msgstr "64 MB Ț đćńéóóüôćńá"
+" ĐńïóïśȚ\n"
+"\n"
+"\n"
+" ¶ńíçóç\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" ¶äćéá\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" ÌćôáöïńÜ\n"
+"\n"
+"\n"
+"\n"
+" Œëá\n"
+"\n"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "32 MB"
-msgstr "32 MB"
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Áöáßńćóç áőôïę ôïő ćêôőđùôȚ áđü ôï Star Office/OpenOffice.org/GIMP"
-#: ../../Xconfig/card.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "16 MB"
-msgstr "16 MB"
+msgid ""
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
+msgstr ""
+"Linux Virtual Server, śńçóéìïđïéćßôáé ăéá íá äçìéïőńăȚóćé Ęíáí őűçëȚò\n"
+"áđüäïóçò êáé äéáèćóéìüôçôáò ćîőđçńćôçôȚ."
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "8 MB"
-msgstr "8 MB"
+msgid "4 billion colors (32 bits)"
+msgstr "4 äéóćêáôïììęńéá śńțìáôá (32 bits)"
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "4 MB"
-msgstr "4 MB"
+msgid "Micronesia"
+msgstr "Ìéêńïíçóßá"
-#: ../../Xconfig/card.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "2 MB"
-msgstr "2 MB"
+msgid "License"
+msgstr "¶äćéá ŚńȚóçò"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "1 MB"
-msgstr "1 MB"
+msgid "This may take a moment to generate the keys."
+msgstr ""
+"Ìđïńćß íá śńćéáóôïęí ìćńéêÜ ëćđôÜ ăéá ôç äçìéïőńăßá ôùí êëćéäéțí:To ../../"
+"standalone/drakbackup:1"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "512 kB"
-msgstr "512 kB"
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgstr "Áőôüìáôç áíßśíćőóç ćêôőđùôĘò (Ôïđéêïß, TCP/Socket, êáé ćêôőđùôĘò SMB)"
-#: ../../Xconfig/card.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "256 kB"
-msgstr "256 kB"
+msgid "Sagem (using pppoa) usb"
+msgstr "Sagem (ìć śńȚóç ôïő pppoa) usb"
-#: ../../Xconfig/main.pm:1
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
-"ÄéáôȚńçóç őđáńśüíôùí ńőèìßóćùí;\n"
-"Ïé ôńĘśïőóćò ńőèìßóćéò ćßíáé:\n"
-"\n"
-"%s"
-
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Options"
-msgstr "ĆđéëïăĘò"
+"ĐńïêëȚèçêć óöÜëìá - äćí âńĘèçêáí óőóêćőĘò óôéò ïđïßćò íá ćßíáé äőíáôȚ ç "
+"äçìéïőńăßá íĘùí óőóôçìÜôùí áńśćßùí. Đáńáêáëț ćëĘăîôć ôï őëéêü óáò ăéá ôçí "
+"áéôßá áőôïę ôïő đńïâëȚìáôïò"
-#: ../../Xconfig/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Test"
-msgstr "ÄïêéìȚ"
+msgid "Starting the printing system at boot time"
+msgstr "Ćêêßíçóç ôïő óőóôȚìáôïò ćêôęđùóçò êáôÜ ôçí ćêêßíçóç"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Resolution"
-msgstr "ÁíÜëőóç"
+msgid "Do you want to start the connection at boot?"
+msgstr "ÈĘëćôć íá óőíäĘćóôć êáôÜ ôçí ćêêßíçóç;"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Monitor"
-msgstr "Ïèüíç"
+msgid "Processor ID"
+msgstr "Ôáőôüôçôá ćđćîćńăáóôȚ"
-#: ../../Xconfig/main.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Graphic Card"
-msgstr "ÊÜńôá Ăńáöéêțí"
+msgid "Sound trouble shooting"
+msgstr "Ćđßëőóç đńïâëçìÜôùí čśïő"
-#: ../../Xconfig/monitor.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Vertical refresh rate"
-msgstr "Óőśíüôçôá êáôáêüńőöçò áíáíĘùóçò"
+msgid "Polish (qwerty layout)"
+msgstr "Đïëùíéêü (äéÜôáîç qwerty)"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Óőśíüôçôá ïńéæüíôéáò áíáíĘùóçò"
+msgid "activate now"
+msgstr "ćíćńăïđïßçóç ôțńá"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
+"Drakbackup activities via CD:\n"
+"\n"
msgstr ""
-"Ïé äęï êńßóéìćò đáńÜìćôńïé ćßíáé ç óőśíüôçôá êáôáêüńőöçò áíáíĘùóçò ćßíáé ç\n"
-"óőśíüôçôá ìć ôçí ïđïßá áíáíćțíćôáé ïëüêëçńç ç ïèüíç, êáèțò êáé ç óőśíüôçôá\n"
-"ïńéæüíôéáò áíáíĘùóçò, ç ïđïßá ćßíáé ç óőśíüôçôá ìć ôçí ïđïßá áíáíćțíïíôáé\n"
-"ïé ïńéæüíôéćò ăńáììĘò.\n"
"\n"
-"Ćßíáé ĐÏËŐ ÓÇÌÁÍÔÉÊÏ íá ìçí ćđéëĘîćôć ôęđï ïèüíçò ôïő ïđïßïő ïé óőśíüôçôćò\n"
-"áíáíĘùóçò ćßíáé ćêôüò ôùí ïńßùí ôçò ïèüíçò óáò: őđÜńśćé êßíäőíïò "
-"êáôáóôńïöȚò\n"
-"ôçò ïèüíçò óáò. Áí äćí ćßóôć óßăïőńïé, êÜíôć ìéá óőíôçńçôéêȚ ćđéëïăȚ."
+"Äńáóôçńéüôçôćò Drakbackup ìĘóù CD:\n"
+"\n"
-#: ../../Xconfig/monitor.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgid ""
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
msgstr ""
+"Đńüêćéôáé íá ćăêáôáóôȚóćôć ôï óęóôçìá ćêôęđùóçò %s óć Ęíá óęóôçìá đïő Ęśćé "
+"ćđßđćäï áóöáëćßáò %s\n"
+"\n"
+"Áőôü ôï óęóôçìá ćêôęđùóçò ćêôćëćß Ęíáí äáßìïíá (äéćńăáóßá óôï öüíôï) đïő "
+"đćńéìĘíćé ôéò ćńăáóßćò ćêôęđùóçò êáé ôéò äéáśćéńßæćôáé. Áőôüò ï äáßìïíáò "
+"ćßíáé ćđßóçò đńïóâÜóéìïò áđü Ęíá áđïìáêńőóìĘíï ìçśÜíçìá áđü ôï äßêôőï êáé "
+"ćđßóçò ćßíáé Ęíá ćí äőíÜìćé óçìćßï ćđßèćóçò. Ăéá áőôü Ęíáò đćńéïńéóìĘíïò "
+"áńéèìüò äáéìüíùí îćêéíÜ ćî ïńéóìïę óć áőôü ôï ćđßđćäï áóöáëćßáò.\n"
+"\n"
+"Ćßóôć âĘâáéïé üôé èĘëćôć íá ńőèìßóćôć ôçí ćêôęđùóç óć áőôü ôï ìçśÜíçìá;"
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Vendor"
-msgstr "ÊáôáóêćőáóôȚò"
+msgid "Host \"%s\", port %s"
+msgstr "Host \"%s\", èęńá %s"
-#: ../../Xconfig/monitor.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Plug'n Play"
-msgstr "¶ìćóçò ôïđïèĘôçóçò êáé ëćéôïőńăßáò"
+msgid "This partition can't be used for loopback"
+msgstr "ÁőôȚ ç êáôÜôìçóç äćí ìđïńćß íá śńçóéìïđïéçèćß ăéá loopback"
-#: ../../Xconfig/monitor.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Choose a monitor"
-msgstr "ĆđéëĘîôć ïèüíç"
+msgid "File already exists. Use it?"
+msgstr "Ôï áńśćßï őđÜńśćé Țäç. Íá ôï śńçóéìïđïéȚóù;"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Graphics card: %s"
-msgstr "ÊÜńôá ăńáöéêțí: %s"
+msgid "received: "
+msgstr "ëçöèĘíôá:"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "ĆđéëĘîôć áíÜëőóç êáé âÜèïò śńțìáôïò"
+msgid "Right Alt key"
+msgstr "Äćîéü đëȚêôńï Alt"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Resolutions"
-msgstr "Áíáëęóćéò"
+msgid "the list of alternative drivers for this sound card"
+msgstr "ç ëßóôá ìć ćíáëëáêôéêïęò ïäçăïęò ăéá ôçí êÜńôá Țśïő óáò"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 äéóćêáôïììęńéá śńțìáôá (32 bits)"
+msgid "Gateway"
+msgstr "Đęëç äéêôęïő"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 ćêáôïììęńéá śńțìáôá (24 bits)"
+msgid "Scanner sharing"
+msgstr "ÊïéíȚ śńȚóç óáńùôțí"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 śéëéÜäćò śńțìáôá (16 bits)"
+msgid "Tonga"
+msgstr "Ôüăêá"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 śéëéÜäćò śńțìáôá (15 bits)"
+msgid "Tunisia"
+msgstr "Ôőíçóßá"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 śńțìáôá (8 bits)"
+msgid "Profile: "
+msgstr "Đńïößë: "
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Is this the correct setting?"
-msgstr "Ćßíáé óùóôȚ ç ńęèìéóç;"
+msgid ""
+"Click on a device in the left tree in order to display its information here."
+msgstr ""
+"ÊÜíôć êëéê óć ìéá óőóêćőȚ óôï áńéóôćńü ôìȚìá ăéá íá äćßôć ćäț ôéò "
+"đëçńïöïńßćò."
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Leaving in %d seconds"
-msgstr "žîïäïò óć %d äćőôćńüëćđôá"
+msgid "XawTV isn't installed!"
+msgstr "Ôï XawTV ćăêáôáóôÜèçêć!"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
-msgstr ""
-"ĐáńïőóéÜóôçêćĘíá óöÜëìá:\n"
-"%s\n"
-"ÄïêéìÜóôć íá áëëÜîćôć ìćńéêĘò đáńáìĘôńïőò"
-
-#: ../../Xconfig/test.pm:1
-#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
+"Create/Transfer\n"
+"backup keys for SSH"
msgstr ""
-"ĐńïóïśȚ: Ç äïêéìȚ óć áőôȚ ôçí êÜńôá ăńáöéêțí ìđïńćß íá đáățóćé ôïí "
-"őđïëïăéóôȚ óáò"
+"Äçìéïőńăßá/ÌćôáöïńÜ\n"
+"áíôéăńÜöùí áóöáëćßáò ôùí êëćéäéțí SSH"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "ÈĘëćôć íá äïêéìÜóćôć ôéò ńőèìßóćéò;"
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr "Śùńßò ôá êńßóéìá áńśćßá ( êùäéêïß, ïìÜäćò, fstab)"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Test of the configuration"
-msgstr "ÄïêéìȚ ńőèìßóćùí"
+msgid "old static device name used in dev package"
+msgstr "đáëáéÜ óôáôéêȚ üíïìá óőóêćőȚò ôïő đáêĘôïő dev"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "What norm is your TV using?"
-msgstr "Đïéï óęóôçìá śńçóéìïđïéćß ç ôçëćüńáóç óáò;"
+msgid "This label is already used"
+msgstr "ÁőôȚ ç ćôéêĘôá śńçóéìïđïéćßôáé Țäç"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
+"Welcome to the Printer Setup Wizard\n"
"\n"
-"Do you have this feature?"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
"\n"
+" ĆêôőđùôȚò Ïäçăüò\n"
"\n"
"\n"
"\n"
+" áíéśíćęèçêć\n"
"\n"
"\n"
-" Ïëïêëçńțèçêć?"
+"\n"
+" Ćđüìćíï ¶êőńï."
-#: ../../Xconfig/various.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
+msgid "After formatting partition %s, all data on this partition will be lost"
msgstr ""
-"Ìđïńț íá ńőèìßóù ôï óęóôçìÜ óáò Ęôóé țóôć íá îćêéíÜćé áőôüìáôá óć\n"
-"ăńáöéêü đćńéâÜëëïí (XFree).\n"
-"Ćđéèőìćßôć ôçí áőôüìáôç ćêêßíçóç ăńáöéêïę đćńéâÜëëïíôïò;"
+"ÌćôÜ ôçí ìïńöïđïßçóç ôçò êáôÜôìçóçò %s, üëá ôá äćäïìĘíá óć áőôȚí ôçí "
+"êáôÜôìçóç èá śáèïęí"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Graphical interface at startup"
-msgstr "Ăńáöéêü đćńéâÜëëïí óôçí ćêêßíçóç"
+msgid "Connection Time: "
+msgstr "żńá Óęíäćóçò: "
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Ïäçăüò XFree86: %s\n"
+msgid "select perm file to see/edit"
+msgstr "ćđéëĘîôć ôï áńśćßï perm ăéá íá ôï äćßôć/ćđćîćńăáóôćßôć"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "ĆîőđçńćôçôȚò XFree86: %s\n"
+msgid ""
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
+msgstr ""
+"Đáńáêáëț ćéóÜăćôć ôï CD ćăêáôÜóôáóçò óôïí ïäçăü óáò êáé đáôȚóôć ĆíôÜîćé .\n"
+"ĆÜí äćí ôï Ęśćôć, đáôȚóôć Áêęńùóç ăéá ôçí áđïöőăȚ äéêôőáêȚò áíáâÜèìéóçò."
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Resolution: %s\n"
-msgstr "ÁíÜëőóç: %s\n"
+msgid "Use group id for execution"
+msgstr "ŚńȚóç id ïìÜäáò ăéá ćêôĘëćóç"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Color depth: %s\n"
-msgstr "ÂÜèïò śńțìáôïò: %s\n"
+msgid "Choose the default user:"
+msgstr "ĆđéëĘîôć ôïí đńïćđéëćăìĘíï śńȚóôç:"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "ÌíȚìç êÜńôáò ăńáöéêțí: %s kB\n"
+msgid "Gabon"
+msgstr "Ăêáìđüí"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Graphics card: %s\n"
-msgstr "ÊÜńôá ăńáöéêțí: %s\n"
+msgid ""
+"\n"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
+msgstr ""
+"\n"
+"ĆêôőđùôĘò đïő ćßíáé óőíäćìĘíïé óć áđïìáêńőóìĘíïőò ćîőđçńćôçôĘò CUPS äćí "
+"śńćéÜæćôáé íá ńőèìéóôïęí ćäț, èá áíéśíćőèïęí áőôüìáôá."
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Óőśíüôçôá êáôáêüńőöçò áíáíĘùóçò: %s\n"
+msgid ""
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
+msgstr ""
+"Ôï Mandrake Linux őđïóôçńßæćé đïëëáđëĘò ăëțóóćò.ĆđéëĘîôć \n"
+"ôéò Üëëćò ăëțóóćò đïő èá ćßíáé äéáèĘóéìćò ìćôÜ ôï đĘńáò ôçò \n"
+"ćăêáôÜóôáóçò êáé ôçí ćđáíćêêßíçóç ôïő óőóôȚìáôüò óáò."
-#: ../../Xconfig/various.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Óőśíüôçôá ïńéæüíôéáò áíáíĘùóçò: %s\n"
+msgid "Domain"
+msgstr "ÔïìĘáò"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Monitor: %s\n"
-msgstr "Ïèüíç: %s\n"
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "ÁêńéâȚò đïóüôçôáò ìíȚìçò áí śńćéÜæćôáé (ćíôïđßóôçêáí %d MB)"
-#: ../../Xconfig/various.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Mouse device: %s\n"
-msgstr "ÓőóêćőȚ đïíôéêéïę: %s\n"
+msgid ""
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
+"\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
+"\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
+msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Ôęđïò đïíôéêéïę: %s\n"
+msgid "Provider dns 2 (optional)"
+msgstr "dns 2 ĐáńïśĘá (đńïáéńćôéêü)"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "ÄéÜôáîç đëçêôńïëïăßïő: %s\n"
+msgid "Boot device"
+msgstr "ÓőóêćőȚ ćêêßíçóçò"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Options: %s"
-msgstr "ĆđéëïăĘò: %s"
+msgid "Which partition do you want to resize?"
+msgstr "Óć ôé ôęđï êáôÜôìçóçò èĘëćôć íá áëëÜîćôć ìĘăćèïò;"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mount point: "
-msgstr "Óçìćßï óęíäćóçò: "
+msgid "United States Minor Outlying Islands"
+msgstr "ÌéêńÜ áđïìïíùìĘíá íçóéÜ ÇíùìĘíùí Đïëéôćéțí"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Server: "
-msgstr "ĆîőđçńćôçôȚò:"
+msgid "A tool to monitor your logs"
+msgstr "žíá ćńăáëćßï ăéá íá âëĘđćôć ôá log óáò"
-#: ../../diskdrake/dav.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "Ç äéćęèőíóç đńĘđćé íá îćêéíÜ ìć http:// Ț https://"
+msgid "Djibouti"
+msgstr "Ôæéìđïőôß"
-#: ../../diskdrake/dav.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Đáńáêáëț ćéóÜăćôć ôçí äéćęèőíóç ôïő ćîőđçńćôçôȚ WebDAV"
+msgid "detected on port %s"
+msgstr "áíéśíćęèçêć óôçí đüńôá %s"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Mount point"
-msgstr "Óçìćßï óęíäćóçò"
+msgid "LPD"
+msgstr "LPD"
-#: ../../diskdrake/dav.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Server"
-msgstr "ĆîőđçńćôçôȚò"
+msgid "Graphics card: %s\n"
+msgstr "ÊÜńôá ăńáöéêțí: %s\n"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Mount"
-msgstr "Óęíäćóç"
+msgid "Yaboot"
+msgstr "Yaboot"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unmount"
-msgstr "Áđïóęíäćóç"
+msgid "Please check if you are using a DVDRAM device"
+msgstr "Đáńáêáëț ïńßóôć áí êÜíćôć śńȚóç óőóêćőȚò DVDRAM"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "New"
-msgstr "ÍĘï"
-
-#: ../../diskdrake/dav.pm:1
-#, fuzzy, c-format
-msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
-msgstr ""
-"ćîőđçńćôçôȚò\n"
-" ćîőđçńćôçôȚò\n"
-" ćîőđçńćôçôȚò\n"
-" ÍĘï."
+msgid "Splash selection"
+msgstr "ÔìȚìá Splash"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Use ``%s'' instead"
-msgstr "ŚńçóéìïđïéȚóôć ``%s'' óôç èĘóç ôïő"
+msgid "Extended partition not supported on this platform"
+msgstr "Ç ćêôćôáìĘíç êáôÜôìçóç äćí őđïóôçńßæćôáé óć áőôüí ôïí ôęđï óőóôȚìáôïò"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Type"
-msgstr "Ôęđïò"
+msgid "ISDN Configuration"
+msgstr "Ńőèìßóćéò ISDN"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "ÊÜíôć đńțôá ``Áđïóęíäćóç''"
+msgid "high"
+msgstr "Őűçëü"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Delete"
-msgstr "ÄéáăńáöȚ"
+msgid "Internet Connection Sharing"
+msgstr "ÊïéíȚ Óęíäćóç Äéáäéêôęïő"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Create"
-msgstr "Äçìéïőńăßá"
+msgid "Choose file"
+msgstr "ĆđéëĘîôć Ęíá áńśćßï"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Filesystem types:"
-msgstr "Ôęđïé óőóôȚìáôïò áńśćßùí:"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
+msgstr ""
+"ĐńïóïśȚ! Áíéśíćęèçêć ìéá Țäç őđÜńśïőóá ńęèìéóç Ôïßśïőò Đńïóôáóßáò. șóùò "
+"śńćéáóôïęí ïńéóìĘíćò śćéńïêßíçôćò ńőèìßóćéò ìćôÜ ôçí ćăêáôÜóôáóç."
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Empty"
-msgstr "¶äćéï"
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "Ćêôęđùóç/Đńüóâáóç ÊÜńôáò Öùôïăńáöéțí óôï \"%s\""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Windows"
-msgstr "Windows "
+msgid ""
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
+msgstr ""
+"ÈĘëćôć íá ćíćńăïđïéȚóćôć ôçí ćêôęđùóç óôïőò đáńáđÜíù ćêôőđùôĘò Ț óć êÜđïéïí "
+"Üëëïí óôï ôïđéêü óáò äßêôőï;\n"
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "HFS"
-msgstr "HFS"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer default settings"
+msgstr "ĆđéëïăȚ ìïíôĘëïő ćêôőđùôȚ"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Ăćíéêïę ôęđïő đïíôßêé PS2 ìć ńïäÜêé"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Swap"
-msgstr "Swap"
+msgid "Removing old printer \"%s\"..."
+msgstr "Áöáßńćóç đáëáéïę ćêôőđùôȚ \"%s\"..."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Journalised FS"
-msgstr "Journalised FS"
+msgid "Select a device !"
+msgstr "ĆđéëĘîôć ìéá óőóêćőȚ !"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ext2"
-msgstr "Ext2"
+msgid "Remove selected server"
+msgstr "Áöáßńćóç ćđéëćăìĘíïő ćîőđçńćôçôȚ"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No hard drives found"
-msgstr "Äćí âńĘèçêáí äßóêïé!"
+msgid "French Southern Territories"
+msgstr "ĂáëëéêĘò Íüôéćò ĐćńéïśĘò"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Please click on a partition"
-msgstr "Đáńáêáëț êÜíôć êëéê óć ìéá êáôÜôìçóç"
+msgid "the vendor name of the processor"
+msgstr "ôï üíïìá êáôáóêćőáóôȚ ôïő ćđćîćńăáóôȚ"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+msgid "All data on this partition should be backed-up"
msgstr ""
-"žśćôć ìéá ìćăÜëç êáôÜôìçóç ôùí MicroSoft Windows \n"
-"Đńïôćßíù đńțôá íá áëëÜîćôć ôï ìĘăćèüò ôçò\n"
-"(ÊÜíôć êëéê ćđÜíù ôçò êáé ćđéëĘîôć \"ÁëëáăȚ ÌćăĘèïőò\")"
+"ĐńĘđćé íá ăßíćé áíôßăńáöï áóöáëćßáò üëùí ôùí äćäïìĘíùí óć áőôȚ ôçí êáôÜôìçóç"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Choose action"
-msgstr "ĆđéëĘîôć đńÜîç"
+msgid "Installing package %s"
+msgstr "ĆăêáôÜóôáóç đáêĘôïő %s"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Wizard"
-msgstr "Ïäçăüò"
+msgid "Checking device and configuring HPOJ..."
+msgstr "žëćăśïò êáé ńęèìéóç ôçò óőóêćőȚ HPOJ..."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
msgstr ""
-"ĆÜí óêïđćęćôć íá śńçóéìïđïéȚóćôć ôï aboot, đńïóĘîôć íá áöȚóćôć ćëćęèćńï śțńï "
-"(2048 ôïìćßò ćßíáé áńêćôïß)\n"
-"óôçí áńśȚ ôïő äßóêïő"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Đáńáêáëț êÜíôć đńțôá Ęíá áíôßăńáöï áóöáëćßáò ôùí äćäïìĘíùí óáò"
-
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Read carefully!"
-msgstr "ÄéáâÜóôć đńïóćêôéêÜ!"
+"Ăéá íá đńïóèĘóćôć êáôáôìȚóćéò, đáńáêáëț äéáăńÜűôć ìßá Ęôóé țóôć íá ćßíáé "
+"äőíáôȚ ç đńïóèȚêç ćêôćôáìĘíçò êáôÜôìçóçò"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Encryption key (again)"
-msgstr "Êëćéäß êńőđôïăńÜöçóçò (îáíÜ)"
+msgid ""
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
+msgstr ""
+"Ï ćêôőđùôȚò ńőèìßóôçêć áőôüìáôá ăéá đńüóâáóç óôéò êÜńôćò áđïèȚêćőóçò "
+"öùôïăńáöéțí ôïő áđü ôïí őđïëïăéóôȚ óáò. Ìđïńćßôć íá Ęśćôć đńüóâáóç óć áőôĘò "
+"śńçóéìïđïéțíôáò ôï ăńáöéêü đńüăńáììá \"MtoolsFM\" (Ìćíïę: \"ĆöáńìïăĘò\" -> "
+"\"Ćńăáëćßá Áńśćßùí\" -> \"MTools File Manager\") Ț ôçí ćíôïëȚ \"mtools"
+"\" (ăéá đćńéóóüôćńćò đëçńïöïńßćò đëçêôńïëïăȚóôć \"man mtools\" óôç ăńáììȚ "
+"ćíôïëțí). Èá âńćßôć ôéò öùôïăńáößćò óáò óôïí äßóêï \"p:\", Ț óć äßóêïőò ìć "
+"ôá ćđüìćíá ăńÜììáôá áí Ęśćôć đćńéóóüôćńïőò áđü Ęíáí ćêôőđùôĘò HP ìć êÜńôćò "
+"áđïèȚêćőóçò öùôïăńáöéțí. Óć áőôȚí ôçí đćńßđôùóç, óôï đńüăńáììá \"MtoolsFM\" "
+"ìđïńćßôć íá ćđéëĘîćôć ìćôáîę ôùí äéáèĘóéìùí ăńáììÜôùí äßóêïő ìć ôï đćäßï "
+"óôçí Üíù äćîéÜ ăùíßá ôïő êáôáëüăïő áńśćßùí."
-#: ../../diskdrake/interactive.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Encryption key"
-msgstr "Êëćéäß êńőđôïăńÜöçóçò"
+msgid "Choose packages to install"
+msgstr "ĆđéëïăȚ đáêĘôùí"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The encryption keys do not match"
-msgstr "Ôá êëćéäéÜ êńőđôïăńÜöçóçò ćßíáé áíüìïéá"
+msgid ""
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
+msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr ""
-"Áőôüò ï êùäéêüò đńüóâáóçò ćßíáé đïëę áđëüò (đńĘđćé íá Ęśćé ôïőëÜśéóôïí %d "
-"śáńáêôȚńćò)"
+"Œëćò ïé őđÜńśïőóćò êáôáôìȚóćéò êáé ôá äćäïìĘíá ôïőò óôïí äßóêï %s èá śáèïęí"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "ĆđéëĘîôć ôï êëćéäß êńőđôïăńÜöçóçò ôïő óőóôȚìáôïò áńśćßùí"
+msgid ""
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
+msgstr ""
+"Äćí ćđĘìćéíć áńêćôüò śțńïò óôï óęóôçìÜ óáò ăéá ćăêáôÜóôáóç Ț áíáâÜèìéóç (%d "
+"> %d)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Filesystem encryption key"
-msgstr "Êëćéäß êńőđôïăńÜöçóçò óőóôȚìáôïò áńśćßùí"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
+msgstr ""
+"ÊÜèć ćêôőđùôȚò śńćéÜæćôáé Ęíá üíïìá (đ.ś. \"ćêôőđùôȚò\").Ôá đćäßá ĐćńéăńáöȚ "
+"êáé Ôïđïèćóßá äćí śńćéÜæćôáé íá óőìđëçńùèïęí. Ćßíáé áđëÜ óśüëéá ăéá ôïőò "
+"śńȚóôćò."
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Type: "
-msgstr "Ôęđïò: "
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
+msgstr ""
+"ĆêôőđùôȚò Œśé ĆêôőđùôȚò\n"
+"\n"
+" íĘï\n"
+"."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "on channel %d id %d\n"
-msgstr "óôï êáíÜëé %d id %d\n"
+msgid "Bhutan"
+msgstr "ÌđïőôÜí"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Ôęđïò đßíáêá êáôáôìȚóćùí: %s\n"
+msgid "Network interface"
+msgstr "ÓőóêćőȚ äéêôęïő"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Äßóêïé LVM %s\n"
+msgid "Reading printer data..."
+msgstr "ÁíÜăíùóç äćäïìĘíùí ćêôőđùôȚ..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Info: "
-msgstr "Đëçńïöïńßćò: "
+msgid "Korean keyboard"
+msgstr "ÊïńćÜôéêï Đëçêôńïëüăéï"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Ăćùìćôńßá: %s êęëéíäńïé, %s êćöáëĘò, %s ôïìćßò\n"
+msgid "Not connected"
+msgstr "Äć óőíäĘèçêć"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Size: %s\n"
-msgstr "ÌĘăćèïò: %s\n"
+msgid "Greek"
+msgstr "Ćëëçíéêü"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Read-only"
-msgstr "Ìüíï ăéá áíÜăíùóç"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Device: "
-msgstr "ÓőóêćőȚ: "
+msgid "Saint Kitts and Nevis"
+msgstr "Óáéíô Êéôò êáé ÍĘâéò"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"ÁőôȚ ćßíáé ćéäéêȚ Bootstrap\n"
-"êáôÜôìçóç ăéá\n"
-"dual-booting ôï óęóôçìÜ óáò.\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid ""
+"ssh -i %s %s\\@%s\n"
"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"without being prompted for a password."
msgstr ""
+"ĆđéôőśȚò ìćôáöïńÜ\n"
+"șóùò íá śńćéáóôćß íá ćđáëçèćęóćôć üôé ìđïńćßôć íá đńïóđćëÜóćôć ôïí "
+"äéáêïìéóôȚ ìć:\n"
"\n"
+"ssh -i %s %s\\@%s\n"
"\n"
-" Ïäçăüò\n"
+"śùńßò íá æçôçèćß êùäéêüò đńüóâáóçò."
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Loopback file name: %s"
-msgstr "Œíïìá áńśćßïő loopback: %s"
+msgid "Enable OF Boot?"
+msgstr "Ćíćńăïđïßçóç OF ćêêßíçóçò;"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Äßóêïé RAID %s\n"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr ""
+"Äćí ìđïńćßôć íá śńçóéìïđïéȚóćôć ôï JFS ăéá êáôáôìȚóćéò ìéêńüôćńćò áđü 16MB"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Chunk size %s\n"
-msgstr "ÌĘăćèïò chunk %s\n"
+msgid "Monitor VertRefresh: %s\n"
+msgstr "Óőśíüôçôá êáôáêüńőöçò áíáíĘùóçò: %s\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Level %s\n"
-msgstr "Ćđßđćäï %s\n"
+msgid "path"
+msgstr "èĘóç"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Mount point"
+msgstr "Óçìćßï óęíäćóçò"
+
+#: ../../Xconfig/test.pm:1
#, c-format
msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
msgstr ""
-"ÊáôÜôìçóç ćêêßíçóçò ćî ïńéóìïę\n"
-" (áđü MS-DOS, üśé áđü lilo)\n"
+"ĐáńïőóéÜóôçêćĘíá óöÜëìá:\n"
+"%s\n"
+"ÄïêéìÜóôć íá áëëÜîćôć ìćńéêĘò đáńáìĘôńïőò"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Restore system"
+msgstr "ĆđáíáöïńÜ óőóôȚìáôïò"
+
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"Loopback file(s):\n"
-" %s\n"
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
msgstr ""
-"Áńśćßï (á) loopback:\n"
-" %s\n"
+"ÁőôÜ ćßíáé ôá ìçśáíȚìáôá üđïő ïé ôïđéêÜ óőíäćìĘíïé óáńùôĘò(çò) đńĘđćé íá "
+"ćßíáé äéáèĘóéìïé:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+msgid "The DHCP end ip"
+msgstr "Ç ôćëćőôáßá ip ôïő DHCP"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Mounted\n"
-msgstr "ÓőíäćäćìĘíïò\n"
+msgid "Another one"
+msgstr "Êáé Üëëï"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Not formatted\n"
-msgstr "Áìïńöïđïßçôïò\n"
+msgid "Drakbackup"
+msgstr "Drakbackup"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Formatted\n"
-msgstr "ÌïńöïđïéçìĘíïò\n"
+msgid "Colombia"
+msgstr "Êïëïìâßá"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Êęëéíäńïò áđü %d Ęùò %d\n"
+msgid ""
+"Current configuration of `%s':\n"
+"\n"
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
+msgstr ""
+"ÔńĘśïőóćò ńőèìßóćéò ôïő %s':\n"
+"\n"
+"Äßêôőï: %s\n"
+"Äéćęèőíóç IP : %s\n"
+"IP attribution: %s\n"
+"Ïäçăüò: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid ", %s sectors"
-msgstr ", %s ôïìćßò"
+msgid "Plug'n Play"
+msgstr "¶ìćóçò ôïđïèĘôçóçò êáé ëćéôïőńăßáò"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Size: %s"
-msgstr "ÌĘăćèïò: %s"
+msgid "Reunion"
+msgstr "Ńćïőíéüí"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Start: sector %s\n"
-msgstr "ÁńśȚ: ôïìĘáò %s\n"
+msgid "Details"
+msgstr "ËćđôïìĘńćéćò"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Name: "
-msgstr "Œíïìá: "
+msgid "For security reasons, it will be disconnected now."
+msgstr "Ăéá ëüăïőò áóöáëćßáò, èá áđïóőíäćèćßôć ôțńá."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Đéèáíü DOS ăńÜììá äßóêïő: %s \n"
+msgid "Synchronization tool"
+msgstr "Ćńăáëćßï Óőăśńïíéóìïę"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "partition %s is now known as %s"
-msgstr "Ç êáôÜôìçóç %s ćßíáé ôțńá ăíùóôȚ ùò %s "
+msgid "Checking your system..."
+msgstr "žëćăśïò ôïő óőóôȚìáôïò óáò..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Removing %s"
-msgstr "Áöáßńćóç %s"
+msgid "Print"
+msgstr "Ćêôęđùóç"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
+"\n"
+" óőóêćőȚ"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Copying %s"
-msgstr "ÁíôéăńáöȚ %s"
+msgid "Mongolia"
+msgstr "Ìïăăïëßá"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Moving files to the new partition"
-msgstr "Ìćôáêßíçóç áńśćßùí óôçí íĘá êáôÜôìçóç"
+msgid "Mounted\n"
+msgstr "ÓőíäćäćìĘíïò\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Graphical Interface"
+msgstr "Ăńáöéêü đćńéâÜëëïí"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Restore Users"
+msgstr "ĆđáíáöïńÜ Śńçóôțí"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Encryption key for %s"
+msgstr "Êëćéäß êńőđôïăńÜöçóçò"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
-"Ï êáôÜëïăïò %s đćńéĘśćé Țäç äćäïìĘíá\n"
-"(%s)"
+"Ï portmapper äéáśćéńßæćôáé óőíäĘóćéò RPC, ïé ïđïßćò śńçóéìïđïéïęíôáé\n"
+"áđü đńùôüêïëëá üđùò ôï NFS êáé ôï NIS. ĐńĘđćé íá ćßíáé ćíćńăïđïéçìĘíï óć \n"
+"óőóôȚìáôá đïő äńïőí ùò ćîőđçńćôçôĘò ôĘôïéùí đńùôïêüëëùí."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Hide files"
-msgstr "Áđüêńőűç áńśćßùí"
+msgid "Detected hardware"
+msgstr "Őëéêü đïő áíéśíćęèçêć"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Move files to the new partition"
-msgstr "Ìćôáêßíçóç áńśćßùí óôçí íĘá êáôÜôìçóç"
+msgid "Mauritius"
+msgstr "Ìáőńßêéïò"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Myanmar (Burmese)"
+msgstr "ÌéáíìÜń"
+
+#: ../../fs.pm:1
#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
+msgid "Enabling swap partition %s"
+msgstr "Ćíćńăïđïßçóç êáôÜôìçóçò swap %s"
+
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
msgstr ""
-"ÌćôÜ ôçí ìïńöïđïßçóç ôçò êáôÜôìçóçò %s, üëá ôá äćäïìĘíá óć áőôȚí ôçí "
-"êáôÜôìçóç èá śáèïęí"
+"Äćí őđÜńśćé êáôÜôìçóç FAT ăéá śńȚóç ùò loopback (Ț äćí őđÜńśćé áńêćôüò śțńïò)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Áđáéôćßôáé ćđáíćêêßíçóç ăéá íá ćöáńìïóôïęí ïé áëëáăĘò"
+msgid "Armenian (old)"
+msgstr "Áńìćíéêü (đáëéü)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Ï đßíáêáò êáôáôìȚóćùí ôïő äßóêïő %s èá áđïèçêćőôćß óôïí äßóêï!"
+msgid ""
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
+msgstr ""
+"žíáò ćêôőđùôȚò ìć ôï üíïìá \"%s\" őđÜńśćé Țäç óôï %s\n"
+"ÊÜíôć êëéê óôï \"ÌćôáöïńÜ\" ăéá íá ôïí ćđéêáëęűćôć.\n"
+"Ćđßóçò ìđïńćßôć íá ôïő äțóćôć Ęíá íĘï üíïìá Ț íá ôïí đáńáâëĘűćôć ."
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
+#, fuzzy, c-format
+msgid ""
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
+msgstr "Ćęńćóç"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "Ôï đáêĘôï %s ćßíáé áđáńáßôçôï. Íá ćăêáôáóôáèćß;"
+msgid ", host \"%s\", port %s"
+msgstr ", host \"%s\",èęńá %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "What type of partitioning?"
-msgstr "Ôé ôęđïò êáôÜôìçóçò;"
+msgid "Monaco"
+msgstr "Ìïíáêü"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "ĐńïóïśȚ: ÁőôȚ ç äéáäéêáóßá ćßíáé ćđéêßíäőíç."
+msgid "%s formatting of %s failed"
+msgstr "%s ìïńöïđïßçóç ôïő %s áđĘôőść"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "chunk size"
-msgstr "ìĘăćèïò chunk"
+msgid "Partitioning failed: %s"
+msgstr "Ç êáôÜôìçóç áđĘôőść: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "level"
-msgstr "ćđßđćäï"
+msgid "Canada (cable)"
+msgstr "Êáíáäéêü (ÊáëùäéáêȚ)"
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#: ../../help.pm:1
#, c-format
-msgid "device"
-msgstr "óőóêćőȚ"
+msgid "Upgrade"
+msgstr "ÁíáâÜèìéóç"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Various"
-msgstr "ÄéÜöïńá"
+msgid "Workstation"
+msgstr "Óôáèìüò Ćńăáóßáò"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mount options"
-msgstr "ĆđéëïăĘò óęíäćóçò"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"ĆăêáôÜóôáóç đáêĘôïő %s\n"
+"%d%%"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "File already exists. Use it?"
-msgstr "Ôï áńśćßï őđÜńśćé Țäç. Íá ôï śńçóéìïđïéȚóù;"
+msgid "Kyrgyzstan"
+msgstr "ÊéńăéóôÜí"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "With basic documentation"
+msgstr "Ìć ôçí âáóéêȚ ôćêìçńßùóç (óőíéóôÜôáé!)"
+
+#: ../../services.pm:1
#, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "Ôï áńśćßï śńçóéìïđïéćßôáé Țäç áđü Üëëï loopback, ćđéëĘîôć Ęíá Üëëï"
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anacron, Ęíá đńüăńáììá đćńéïäéêȚò ćêôĘëćóçò ćíôïëțí."
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Give a file name"
-msgstr "Äțóôć Ęíá üíïìá áńśćßïő"
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"ĐńĘđćé íá Ęśćôć ìéá âáóéêȚ êáôÜôìçóç.\n"
+"ÄçìéïőńăȚóôć Ț ćđéëĘîôć ìéá êáôÜôìçóç.\n"
+"ÌćôÜ ïńßóôć ùò óçìćßï óęíäćóçò ôï `/'"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Filesystem type: "
-msgstr "Ôęđïò óőóôȚìáôïò áńśćßùí: "
+msgid "Proxy should be http://..."
+msgstr "Ï proxy đńĘđćé íá ćßíáé http://..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Size in MB: "
-msgstr "ÌĘăćèïò óć MB"
+msgid "South Africa"
+msgstr "Íüôéïò ÁöńéêȚ"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Loopback file name: "
-msgstr "Œíïìá áńśćßïő loopback: "
+msgid "Western Sahara"
+msgstr "ÄőôéêȚ ÓáśÜńá"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Loopback"
-msgstr "Loopback"
+msgid "Etherboot Floppy/ISO"
+msgstr "Etherboot Floppy/ISO"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "ÁőôȚ ç êáôÜôìçóç äćí ìđïńćß íá śńçóéìïđïéçèćß ăéá loopback"
+msgid "Modify printer configuration"
+msgstr "ÁëëáăȚ ńőèìßóćùí ćêôőđùôȚ"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LVM name?"
-msgstr "üíïìá LVM;"
+msgid "Choose a partition"
+msgstr "ĆđéëĘîôć êáôÜôìçóç"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "new"
-msgstr "íĘï"
+msgid "Edit current rule"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "ĆđéëĘîôć Ęíá őđÜńśïí LVM óôï ïđïßï èá ăßíćé ç đńïóèȚêç"
+msgid "%s"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "ĆđéëĘîôć Ęíá őđÜńśïí RAID óôï ïđïßï èá ăßíćé ç đńïóèȚêç"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Moving partition..."
-msgstr "Ìćôáêßíçóç êáôÜôìçóçò óć ćîĘëéîç..."
+msgid "Please test the mouse"
+msgstr "Đáńáêáëț äïêéìÜóôć ôï đïíôßêé"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Moving"
-msgstr "Ìćôáêßíçóç óć ćîĘëéîç"
+msgid "Other Media"
+msgstr "¶ëëá ÌĘóá"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "Óć đïéüí ôïìĘá èĘëćôć íá ìćôáêéíçèćßôć;"
+msgid "Backup system files"
+msgstr "Áíôßăńáöá áóöáëćßáò ôïő óőóôȚìáôïò áńśćßùí"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Sector"
msgstr "ÔïìĘáò"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "Óć đïéüí äßóêï èĘëćôć íá ìćôáêéíçèćßôć;"
+msgid "Qatar"
+msgstr "ÊáôÜń"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Move"
-msgstr "Ìćôáêßíçóç"
+msgid "LDAP Base dn"
+msgstr "LDAP Base dn"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "New size in MB: "
-msgstr "ÍĘï ìĘăćèïò óć MB:"
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr ""
+"Äćí ìđïńćßôć íá ćđéëĘîćôć áőôü ôï đáêĘôï äéüôé äćí őđÜńśćé áńêćôüò śțńïò"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Choose the new size"
-msgstr "ĆđéëĘîôć ôï íĘï ìĘăćèïò"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "generate auto-install floppy"
+msgstr "Äçìéïőńăßá äéóêĘôáò áőôüìáôçò ćăêáôÜóôáóçò"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Resize"
-msgstr "ÁëëáăȚ ìćăĘèïőò"
+msgid "Dialing mode"
+msgstr "Ôńüđïò êëȚóçò"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"ÌćôÜ ôçí áëëáăȚ ìćăĘèïőò óôçí êáôÜôìçóç %s, üëá ôá äćäïìĘíá óć áőôȚí ôçí "
-"êáôÜôìçóç èá śáèïęí"
+msgid "File sharing"
+msgstr "Êïéíüśńçóôá áńśćßá"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr ""
-"ĐńĘđćé íá ăßíćé áíôßăńáöï áóöáëćßáò üëùí ôùí äćäïìĘíùí óć áőôȚ ôçí êáôÜôìçóç"
+msgid "Clean /tmp at each boot"
+msgstr "Êáèáńéóìüò /tmp óć êÜèć ćêêßíçóç"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This partition is not resizeable"
-msgstr "ÁőôȚ ç êáôÜôìçóç äćí ìđïńćß í' áëëÜîćé ìĘăćèïò."
+msgid "Malawi"
+msgstr "ÌáëÜïőé"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Őđïëïăéóìüò FAT filesystem bounds"
+msgid "Please choose your type of mouse."
+msgstr "Đáńáêáëț ćđéëĘîôć ôęđï đïíôéêéïę."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "Đïę èĘëćôć íá óőíäĘóćôć ôï %s;"
+msgid "class of hardware device"
+msgstr "êëÜóç ôçò óőóêćőȚò "
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
msgstr ""
-"Äćí ìđïńț íá áöáéńĘóù ôï óçìćßï óęíäćóçò êáèțò áőôȚ ç êáôÜôìçóç "
-"śńçóéìïđïéćßôáé\n"
-"ăéá loopback. ÁöáéńĘóôć đńțôá ôï loopback"
+"ÁőôÜ ćßíáé ôá ìçśáíȚìáôá üđïő ïé ôïđéêÜ óőíäćìĘíïé ćêôőđùôĘò(çò) đńĘđćé íá "
+"ćßíáé äéáèĘóéìïé:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Đïę èĘëćôć íá óőíäĘóćôć ôçí óőóêćőȚ %s;"
+msgid "United Kingdom"
+msgstr "ÇíùìĘíï Âáóßëćéï"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "Đïę èĘëćôć íá óőíäĘóćôć ôï áńśćßï loopback %s;"
+msgid "running"
+msgstr "ćêôćëćßôáé"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "ÁëëáăȚ áđü ext2 óć ext3"
+msgid "default"
+msgstr "ćî' ïńéóìïę"
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which filesystem do you want?"
-msgstr "Đïéï óęóôçìá áńśćßùí đńïôéìÜôć;"
+msgid "Indonesia"
+msgstr "Éíäïíçóßá"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Change partition type"
-msgstr "ÁëëáăȚ ôęđïő êáôÜôìçóçò"
+msgid "France [SECAM]"
+msgstr "Ăáëëßá [SECAM]"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "restrict"
+msgstr "áđáăüńćőóç"
+
+#: ../../pkgs.pm:1
+#, c-format
+msgid "must have"
+msgstr "đńĘđćé íá őđÜńśćé"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
msgstr ""
-"ÌćôÜ ôçí áëëáăȚ ôęđïő óôçí êáôÜôìçóç %s, üëá ôá äćäïìĘíá óć áőôȚí ôçí "
-"êáôÜôìçóç èá śáèïęí"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remove the loopback file?"
-msgstr "Íá áöáéńćèćß ôï áńśćßï loopback;"
+msgid "Senegal"
+msgstr "ÓćíćăÜëç"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Command line"
+msgstr "ĂńáììȚ ćíôïëțí"
+
+#: ../../share/advertising/08-store.pl:1
#, fuzzy, c-format
msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
-msgstr ""
-"íĘï\n"
-" đńùôćęïőóá\n"
-" đńùôćęïőóá."
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
+msgstr "Linux:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Preference: "
-msgstr "Đńïôßìçóç: "
+msgid "access to administrative files"
+msgstr "đńüóâáóç óć äéáśćéńéóôéêÜ áńśćßá"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Start sector: "
-msgstr "Áńśéêüò ôïìĘáò: "
+msgid ""
+"Error during sendmail.\n"
+" Your report mail was not sent.\n"
+" Please configure sendmail"
+msgstr ""
+"ÓöÜëìá óôï sendmail\n"
+" Ç áíáöïńÜ äćí óôÜëèçêć\n"
+" đáńáêáëț ńőèìßóôć ôï sendmail"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Create a new partition"
-msgstr "Äçìéïőńăßá íĘáò êáôÜôìçóçò"
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ", đïëőśńçóôéêȚ óőóêćőȚ óôçí đáńÜëëçëç èȚńá \\#%s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Use for loopback"
-msgstr "ŚńȚóç ăéá loopback"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Modify RAID"
-msgstr "Ôńïđïđïßçóç RAID"
+msgid "Montserrat"
+msgstr "ÌïíóćńÜô"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Remove from LVM"
-msgstr "Áöáßńćóç áđü ôï LVM"
+msgid "Automatic dependencies"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Remove from RAID"
-msgstr "Áöáßńćóç áđü ôï RAID"
+msgid "Swap"
+msgstr "Swap"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Add to LVM"
-msgstr "ĐńïóèȚêç óôï LVM"
+msgid "Connecting to the Internet "
+msgstr "Óęíäćóç óôï Äéáäßêôőï"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add to RAID"
-msgstr "ĐńïóèȚêç óôï RAID"
+msgid "Restore Other"
+msgstr "ĆđáíáöïńÜ ¶ëëùí"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Format"
-msgstr "Ìïńöïđïßçóç"
+msgid "TV card"
+msgstr "ÊÜńôá TV"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Detailed information"
-msgstr "Ëćđôïìćńćßò đëçńïöïńßćò"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "ĆêôőđùôȚò óć ćîőđçńćôçôȚ SMB/Windows 95/98/NT"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Trying to rescue partition table"
-msgstr "ĐńïóđÜèćéá äéÜóùóçò đßíáêá êáôáôìȚóćùí"
+msgid ", "
+msgstr ", "
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
msgstr ""
-"ĆéóÜăćôć ìéá äéóêĘôá óôïí ïäçăü äéóêĘôáò\n"
-"Œëá ôá äćäïìĘíá óć áőôȚ ôç äéóêĘôá èá śáèïęí"
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Warning"
-msgstr "ĐńïóïśȚ"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select file"
-msgstr "ĆđéëĘîôć áńśćßï"
+msgid "Remove selected host/network"
+msgstr "Áöáßńćóç ćđéëćăìĘíïő őđïëïăéóôȚ/äßêôőï"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
msgstr ""
-"Ï ćöćäńéêüò đßíáêáò êáôáôìȚóćùí Ęśćé äéáöïńćôéêü ìĘăćèïò\n"
-"Íá óőíćśßóù;"
+"Ôï postfix ćßíáé Ęíá đńüăńáììá ìćôáöïńÜò áëëçëïăńáößáò, ôï \n"
+"đńüăńáììá đïő öńïíôßæćé ăéá ôçí ìćôáöïńÜ áëëçëïăńáößáò áđü ôï \n"
+"Ęíá óęóôçìá óôï Üëëï."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Removable media automounting"
-msgstr "Áőôüìáôç óęíäćóç áđïóđțìćíùí ìïíÜäùí"
+msgid "Disconnection from the Internet failed."
+msgstr "Ç áđïóęíäćóç áđü ôï äéáäßêôőï áđĘôőść."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Reload partition table"
-msgstr "ÁíáíĘùóç đßíáêá êáôáôìȚóćùí"
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
+msgstr ""
+"Ćäț ìđïńćßôć íá ćđéëĘîćôć ôï đëȚêôńï Ț ôïí óőíäőáóìü\n"
+"đëȚêôńùí ćíáëëáăȚò ôùí äéáôÜîćùí đëçêôńïëïăßùí\n"
+"(đ.ś. ÁăăëéêȚ Ț ĆëëçíéêȚ)"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Rescue partition table"
-msgstr "Đßíáêáò êáôáôìȚóćùí äéÜóùóçò"
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Network Hotplugging"
+msgstr "Ńőèìßóćéò äéêôęïő"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Restore partition table"
-msgstr "ĆđáíáöïńÜ đßíáêá êáôáôìȚóćùí"
+msgid "if set to yes, reports check result to tty."
+msgstr "áí ïńéóôćß íáé, áđïôĘëćóìá áíáöïńÜò ćëĘăśïő óôï tty"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Save partition table"
-msgstr "ÁđïèȚêćőóç đßíáêá êáôáôìȚóćùí"
+msgid "Restore From CD"
+msgstr "ĆđáíáöïńÜ áđü CD"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-"Ăéá íá đńïóèĘóćôć êáôáôìȚóćéò, đáńáêáëț äéáăńÜűôć ìßá Ęôóé țóôć íá ćßíáé "
-"äőíáôȚ ç đńïóèȚêç ćêôćôáìĘíçò êáôÜôìçóçò"
+"Đńüêćéôáé íá ńőèìßóćôć ôïí őđïëïăéóôȚ óáò ăéá íá ìïéńÜæćôáé ôçí óęíäćóȚ ôïő "
+"óôï Äéáäßêôőï.\n"
+"Ìć áőôȚ ôç äőíáôüôçôá Üëëïé őđïëïăéóôĘò óôï ôïđéêü óáò äßêôőï èá ìđïńïęí "
+"íáêÜíïőí śńȚóç ôçò óęíäćóçò áőôïę ôïő őđïëïăéóôȚ óôï Äéáäßêôőï.\n"
+" \n"
+"Âćâáéùèćßôć üôé Ęśćôć ńőèìßóćé ôï Äßêôőï/Đńüóâáóç Äéáäéêôęïő ìć ôç śńȚóç ôïő "
+"drakconnect đńéí đńïśùńȚóćôć.\n"
+"\n"
+"Óçì. Èá đńĘđćé íá Ęśćôć ìéá êÜńôá äéêôęïő ăéá íá ńőèìßóćôć ôï Ôïđéêü óáò "
+"Äßêôőï (LAN)."
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "I can't add any more partition"
-msgstr "Äćí ìđïńț íá đńïóèĘóù êáôáôìȚóćéò"
+msgid ""
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr ""
+"Đáńáêáëț ćđéëĘîôć đïéá óőóêćőȚ äéêôęïő èĘëćôć íá śńçóéìïđïéȚóćôć ăéá ôçí "
+"óęíäćóç óôï Äéáäßêôőï"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "All primary partitions are used"
-msgstr "Œëćò ïé đńùôćęïőóćò êáôáôìȚóćéò ćßíáé óć śńȚóç"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Hard drive information"
-msgstr "Đëçńïöïńßćò óêëçńïę äßóêïő"
+#: ../../share/advertising/09-mdksecure.pl:1
+#, fuzzy, c-format
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr "Linux"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Auto allocate"
-msgstr "Áőôüìáôç êáôáíïìȚ"
+msgid "Internet Connection Sharing is now disabled."
+msgstr "Ç ÊïéíȚ Óęíäćóç Äéáäéêôęïő ôțńá áđćíćńăïđïéȚèçêć."
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Clear all"
-msgstr "Êáèáńéóìüò üëùí"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr "áí ïńéóôćß íáé, ćđáëȚèćőóç checksum ăéá ôá áńśćßá suid/sgid."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "ÈĘëćôć íá áđïèçêćęóćôć ôéò áëëáăĘò ôïő /etc/fstab"
+msgid "Latin American"
+msgstr "ËáôéíéêȚò ÁìćńéêȚò"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "žîïäïò śùńßò áđïèȚêćőóç ôïő đßíáêá êáôáôìȚóćùí;"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Japanese text printing mode"
+msgstr "ÁëëáăȚ óőóôȚìáôïò ćêôęđùóçò"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Quit without saving"
-msgstr "žîïäïò śùńßò áđïèȚêćőóç"
+msgid "Old device file"
+msgstr "Đáëáéü áńśćßï óőóêćőȚò"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Continue anyway?"
-msgstr "Íá óőíćśßóù;"
+msgid "Info: "
+msgstr "Đëçńïöïńßćò: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Toggle to expert mode"
-msgstr "ÁëëáăȚ óć đńïśùńçìĘíï ôńüđï ëćéôïőńăßáò"
+msgid "Button `%s': %s"
+msgstr "ĐëȚêôńï `%s': %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Toggle to normal mode"
-msgstr "ÁëëáăȚ óć êáíïíéêü ôńüđï ëćéôïőńăßáò"
+msgid "Please wait"
+msgstr "Đáńáêáëț đćńéìĘíćôć"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Undo"
-msgstr "Áíáßńćóç"
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Exit"
-msgstr "žîïäïò"
+msgid "None"
+msgstr "ÊáíĘíáò"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose a partition"
-msgstr "ĆđéëĘîôć êáôÜôìçóç"
+msgid "The entered IP is not correct.\n"
+msgstr "Ç äéćęèőíóç IP đïő ćéóÜăáôć äćí ćßíáé óùóôȚ.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose another partition"
-msgstr "ĆđéëĘîôć Üëëç êáôÜôìçóç"
+msgid "Ethernet Card"
+msgstr "ÊÜńôá Ethernet"
-#: ../../diskdrake/removable.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Change type"
-msgstr "ÁëëáăȚ ôęđïő"
+msgid "Info"
+msgstr "Đëçńïöïńßćò"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Search servers"
-msgstr "ÁíáæȚôçóç äéáêïìéóôțí"
+msgid "Install"
+msgstr "ĆăêáôÜóôáóç"
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Domain"
-msgstr "ÔïìĘáò"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr ""
+"ÊÜíôć êëéê óôï \"Ćđüìćíï ->\" ćÜí èĘëćôć íá äéáăńÜűćôć üëá ôá äćäïìĘíá\n"
+"ôéò êáôáôìȚóćéò đïő âńßóêïíôáé óôïí óêëçńü óáò äßóêï. ĐńïóïśȚ ìćôÜ\n"
+"đïő èá êëéê óôï \"Ćđüìćíï ->\"äćí èá ìđïńćßôć íá áíáêôȚóćôć ôá äćäïìĘíá\n"
+"êáé ôéò êáôáôìȚóćéò đïő âńßóêïíôáé óôïí äßóêï ìáæß êáé ôá Windows\n"
+" Ćđüìćíï\n"
+"\n"
+"ÊÜíôć êëéê óôï \"<- Đńïçăïęìćíï\" ăéá íá ôćńìáôßóćôć ôç ëćéôïőńăßá áőôȚ\n"
+"śùńßò íá śÜóćôć ôá äćäïìĘíá êáé ôéò êáôáôìȚóćéò óáò óôï äßóêï."
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Username"
-msgstr "Œíïìá śńȚóôç"
+msgid "Exit install"
+msgstr "žîïäïò"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Please enter your username, password and domain name to access this host."
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
msgstr ""
-"Đáńáêáëț ćéóÜăćôć ôï üíïìá śńȚóôç ôïí êùäéêü đńüóâáóçò êáé ôï üíïìá ôïìĘá "
-"ăéá ôç óęíäćóç óôïí host."
+"Œëá Ęśïőí ńőèìéóôćß.\n"
+"Ìđïńćßôć ôțńá íá ìïéńÜæćóôć ôç óęíäćóȚ óáò óôï Äéáäßêôőï ìć Üëëïőò "
+"őđïëïăéóôĘò óôï ôïđéêü óáò äßêôőï, ìć ôçí śńȚóç áőôüìáôçò ńęèìéóçò äéêôęïő "
+"(DHCP)."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Domain Authentication Required"
-msgstr "Áđáéôćßôáé Đéóôïđïßçóç ÔïìĘá"
+msgid "Remote CUPS server"
+msgstr "ÁđïìáêńőóìĘíïò ćîőđçńćôçôȚò CUPS"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Another one"
-msgstr "Êáé Üëëï"
+msgid "Sun - Mouse"
+msgstr "Sun - Mouse"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Which username"
-msgstr "Đïßï üíïìá śńȚóôç"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
+msgstr ""
+"ŐđÜńśćé ìüíï Ęíáò ńőèìéóìĘíïò đńïóáńìïăĘáò äéêôęïő óôï óęóôçìÜ óáò:\n"
+"\n"
+"%s\n"
+"\n"
+"Èá ńőèìéóôćß ôï Ôïđéêü óáò Äßêôőï ìć áőôüí ôïí đńïóáńìïăĘá."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Can't login using username %s (bad password?)"
-msgstr "Áäőíáìßá đńïóđĘëáóçò ìć ôï üíïìá śńȚóôç %s (ëÜèïò êùäéêüò)"
+msgid "Minimal install"
+msgstr "ĆëÜśéóôç ĆăêáôÜóôáóç"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "cpu # "
-msgstr "ćđćîćńăáóôȚò # "
+msgid "Ethiopia"
+msgstr "Áéèéïđßá"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "SMBus controllers"
-msgstr "ĆëćăêôĘò SMBus"
+msgid "Devanagari"
+msgstr "Äćâáíáăáńéêü"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "USB controllers"
-msgstr "ĆëćăêôĘò USB"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr ""
+"- óőóêćőĘò pci: äßíćé ôç èęńá PCI, ôç óőóêćőȚ êáé ëćéôïőńăßá áőôȚò ôçò "
+"êÜńôáò\n"
+"- óőóêćőĘò eide: ç óőóêćőȚ ćßíáé óőóêćőȚ slave Ț master\n"
+"- óőóêćőĘò scsi: ï äßáőëïò scsi êáé ôá śáńáêôçńéóôéêÜ ôçò óőóêćőȚò scsi"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "SCSI controllers"
-msgstr "ćëćăêôĘò SCSI"
-
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Firewire controllers"
-msgstr "ĆëćăêôĘò USB"
+msgid "Total size: %d / %d MB"
+msgstr "Óőíïëéêü ìĘăćèïò: %d / %d MB"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "ćëćăêôĘò (E)IDE/ATA"
+msgid "disabled"
+msgstr "áđćíćńăïđïéçìĘíï"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Joystick"
-msgstr "Joystick"
+msgid "Search for new scanners"
+msgstr "ÁíáæȚôçóç ăéá íĘïőò óáńùôĘò"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Scanner"
-msgstr "ÓáńùôȚò"
+msgid "Disabling servers..."
+msgstr "Áđćíćńăïđïßçóç ćîőđçńćôçôțí..."
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unknown/Others"
-msgstr "¶ăíùóôï/¶ëëï"
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr ""
+"Đáńáêáëț ćđéëĘîôć ôï \n"
+"äéÜóôçìá ìćôáîę ôïő êÜèć\n"
+"áíôßăńáöïő áóöáëćßáò"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Bridges and system controllers"
-msgstr ""
+msgid "Installation of %s failed. The following error occured:"
+msgstr "Ç ćăêáôÜóôáóç ôïő %s áđĘôőść. ĐńïêëȚèçêć ôï áêüëïőèï óöÜëìá:"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Modem"
-msgstr "Ìüíôćì"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr "Áäőíáìßá ćêêßíçóçò mkinitrd -f /boot/initrd-%s.img %s."
-#: ../../harddrake/data.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Ethernetcard"
-msgstr "ÊÜńôá Äéêôęïő Ethernet"
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
+msgstr ""
+"žśćôć ćđéëĘîćé ôïőò đáńáêÜôù äéáêïìéóôĘò(ç): %s\n"
+"\n"
+"\n"
+"Áőôïß ïé äéáêïìéóôĘò ćßíáé ćî ïńéóìïę ćíćńăćß. Äćí Ęśïőí êÜđïéï ăíùóôü "
+"đńüâëçìá\n"
+"áóöÜëćéáò, áëëÜ ìđïńïęí íá âńćèïęí íĘá. Óć áőôȚ ôçí đćńßđôùóç âćâáéùèćßôć "
+"üôé\n"
+"Ęśćôć ćăêáôáóôȚóćé ôçí ôćëćőôáßá Ęêäïóç ôï óőíôïìüôćńï.\n"
+"\n"
+"\n"
+"Ćßóôć âĘâáéïé ăéá ôçí ćăêáôÜóôáóç áőôțí ôùí äéáêïìéóôțí;\n"
-#: ../../harddrake/data.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Processors"
-msgstr "ĆđćîćńăáóôĘò"
+msgid "Network printer (TCP/Socket)"
+msgstr "ĆêôőđùôȚò äéêôęïő (TCP/Socket)"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Webcam"
-msgstr ""
+msgid "Backup User files..."
+msgstr "Áíôßăńáöï Áóöáëćßáò ôùí áńśćßùí Śńçóôțí..."
-#: ../../harddrake/data.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Soundcard"
-msgstr "ÊÜńôá Țśïő"
+msgid "Install system"
+msgstr "ĆăêáôÜóôáóç óőóôȚìáôïò"
-#: ../../harddrake/data.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Other MultiMedia devices"
-msgstr "¶ëëá óőóêćőĘò ĐïëőìĘóùí"
+msgid "First DNS Server (optional)"
+msgstr "Đńțôïò ćîőđçńćôçôȚò DNS (đńïáéńćôéêü)"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Tvcard"
-msgstr "ÊÜńôá TV"
+msgid ""
+"Alternatively, you can specify a device name/file name in the input line"
+msgstr ""
+"ĆíáëëáêôéêÜ, ìđïńćßôć íá ćéóÜăćôć Ęíá üíïìá óőóêćőȚò/áńśćßïő óôç ăńáììȚ "
+"ćéóáăùăȚò"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Videocard"
-msgstr "ÊÜńôá ïèüíçò"
+msgid "dhcpd Config..."
+msgstr "Ńęèìéóç dhcpd..."
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Tape"
-msgstr "Ôáéíßá"
+msgid "The setup has already been done, but it's currently disabled."
+msgstr "Ç ńęèìéóç Ęśćé Țäç ăßíćé, áëëÜ áőôȚ ôç óôéăìȚ ćßíáé áđćíćńăïđïéçìĘíç."
-#: ../../harddrake/data.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
+msgid "LILO/grub Installation"
+msgstr "ĆăêáôÜóôáóç LILO/grub"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "CD/DVD burners"
-msgstr "ÓőóêćőĘò ćăăńáöȚò CD/DVD"
+msgid "Israeli"
+msgstr "ÉóńáȚë"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "CDROM"
-msgstr "CDROM"
+msgid "load setting"
+msgstr "Öüńôùóç ńőèìßóćùí"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disk"
-msgstr "Äßóêïò"
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "ĆêôőđùôȚò \"%s\"óôïí ćîőđçńćôçôȚ \"%s\""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Zip"
-msgstr "Zip"
+msgid "Floppy can be removed now"
+msgstr "Ôțńá ìđïńćßôć íá áöáéńĘóôć ôç äéóêĘôá"
-#: ../../harddrake/data.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Truly minimal install"
+msgstr "ĆëÜśéóôç ĆăêáôÜóôáóç"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Floppy"
-msgstr "ÄéóêĘôá"
+msgid "Denmark"
+msgstr "Äáíßá"
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Let me pick any driver"
-msgstr "Èá äéáëĘîù ćăț ïäçăü"
+msgid "Moving partition..."
+msgstr "Ìćôáêßíçóç êáôÜôìçóçò óć ćîĘëéîç..."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Driver:"
-msgstr "Ïäçăüò:"
+msgid "(This) DHCP Server IP"
+msgstr "(ÁőôȚ ôç) IP ôïő ćîőđçńćôçôȚ DHCP"
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
+msgid "Test of the configuration"
+msgstr "ÄïêéìȚ ńőèìßóćùí"
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr ""
+msgid "Installing %s ..."
+msgstr "ĆăêáôÜóôáóç %s ..."
-#: ../../harddrake/sound.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
-"The classic bug sound tester is to run the following commands:\n"
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
+"\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
+"\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
+"\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
+"\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
+msgstr ""
"\n"
"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
-msgstr ""
"\n"
+" ćîőđçńćôçôȚò\n"
+" ÏìÜäá ćńăáóßáò:\n"
+"\n"
+" ćî' ïńéóìïę Linux\n"
"\n"
"\n"
+" Linux\n"
+"\n"
+" Œśé Íáé\n"
"\n"
" ćî' ïńéóìïę\n"
"\n"
+" áđćíćńăïđïßçóç\n"
"\n"
"\n"
"\n"
-" ćíćńăïđïßçóç\n"
"\n"
"\n"
"\n"
@@ -8891,3141 +8634,3302 @@ msgstr ""
"\n"
"\n"
"\n"
+"."
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Sound trouble shooting"
-msgstr "Ćđßëőóç đńïâëçìÜôùí čśïő"
-
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "ÓöÜëìá: Ï ïäçăüò \"%s\" ôçò êÜńôáò Țśïő óáò äćí őđÜńśćé óôç ëßóôá"
-
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Unkown driver"
-msgstr "¶ăíùóôïò ïäçăüò"
-
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "Äćí őđÜńśćé êÜđïéïò ăíùóôüò ïäçăüò ăéá ôçí êÜńôá Țśïő óáò (%s)"
-
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No known driver"
-msgstr "ÊáíĘíáò ăíùóôüò ïäçăüò"
+msgid "Choose your filesystem encryption key"
+msgstr "ĆđéëĘîôć ôï êëćéäß êńőđôïăńÜöçóçò ôïő óőóôȚìáôïò áńśćßùí"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
msgstr ""
-"Äćí őđÜńśćé ăíùóôüò ćíáëëáêôéêüò ïäçăüò OSS/ALSA ăéá ôçí êÜńôá Țśïő óáò (%s)"
+"óőóêćőȚ\n"
+"\n"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No open source driver"
-msgstr "ÊáíĘíáò ïäçăüò áíïéśôïę êțäéêá"
+msgid "Andorra"
+msgstr "Áíäüńá"
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Đáńáêáëț đćńéìĘíćôć... ĆöáńìïăȚ ńőèìßóćùí"
+msgid "Sierra Leone"
+msgstr "ÓéĘńńá Ëćüíć"
-#: ../../harddrake/sound.pm:1
-#, fuzzy, c-format
-msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"\n"
-" íĘï."
+#: ../../lang.pm:1
+#, c-format
+msgid "Botswana"
+msgstr "ÌđïôóïőÜíá"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Trouble shooting"
-msgstr "Ćđßëőóç đńïâëçìÜôùí"
+msgid "(default value: %s)"
+msgstr "(ĐńïćđéëćăìĘíç ôéìȚ: %s)"
-#: ../../harddrake/sound.pm:1
-#, fuzzy, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
-msgstr ""
-"Óęóôçìá\n"
-" Ôé\n"
-"\n"
-" Ăéá ĐńïśùńçìĘíïőò Linux\n"
-" PCI\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" íĘï"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Alternative test page (Letter)"
+msgstr "ĆíáëëáêôéêȚ äïêéìáóôéêȚ óćëßäá (Letter)"
-#: ../../harddrake/sound.pm:1
-#, fuzzy, c-format
+#: ../../standalone/drakgw:1
+#, c-format
msgid ""
+"DHCP Server Configuration.\n"
"\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
msgstr ""
+"Ńęèìéóç ĆîőđçńćôçôȚ DHCP\n"
"\n"
+"Ćäț ìđïńćßôć ćđéëĘîćôć ôéò äéÜöïńćò ćđéëïăĘò óôç ńęèìéóç ôïő ćîőđçńćôçôȚ "
+"DHCP\n"
+"Áí äćí îĘńćôć ôé óçìáßíćé áőôü, áđëÜ áöȚóôć ôï ùò Ęśćé\n"
"\n"
-" ćî' ïńéóìïę"
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr ""
-"Ćäț ìđïńćßôć íá ćđéëĘîćôć Ęíáí ćíáëëáêôéêü ïäçăü (OSS Ț ALSA) ăéá ôçí êÜńôá "
-"Țśïő óáò (%s)"
+msgid "Choose an X server"
+msgstr "ĆđéëĘîôć ôïí ćîőđçńćôçôȚ Ś"
-#: ../../harddrake/sound.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Sound configuration"
-msgstr "Ńęèìéóç Țśïő"
+msgid "Swap partition size in MB: "
+msgstr "ÌĘăćèïò êáôÜôìçóçò swap óć MB"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
-msgstr ""
-"Äćí őđÜńśćé ăíùóôüò ćíáëëáêôéêüò ïäçăüò OSS/ALSA ăéá ôçí êÜńôá Țśïő óáò (%s)"
+"Other (not drakbackup)\n"
+"keys in place already"
+msgstr "¶ëëï\n"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No alternative driver"
-msgstr "ÊáíĘíáò ćíáëëáêôéêüò ïäçăüò"
+msgid "No changes to backup!"
+msgstr "Äćí őđÜńśïőí áëëáăĘò ăéá íá ăßíïőí áíôßăńáöá áóöáëćßáò!"
-#: ../../harddrake/v4l.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "enable radio support"
-msgstr "ćíćńăïđïßçóç ńáäéïöțíïő"
+msgid "Formatted\n"
+msgstr "ÌïńöïđïéçìĘíïò\n"
-#: ../../harddrake/v4l.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Radio support:"
-msgstr "ŐđïóôȚńéîç ńáäéïöțíïő:"
+msgid "Type of install"
+msgstr "Ôęđïò ćăêáôÜóôáóçò"
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "PLL setting:"
-msgstr "Ńőèìßóćéò PLL:"
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "ĆêôőđùôȚò \"%s\" óć ćîőđçńćôçôȚ SMB/Windows \"%s\""
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "number of capture buffers for mmap'ed capture"
+msgid ""
+"\n"
+"- Daemon (%s) include:\n"
msgstr ""
+"\n"
+"- Äáßìïíáò (%s) ìáæß ìć :\n"
-#: ../../harddrake/v4l.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Number of capture buffers:"
-msgstr ""
+msgid "%d comma separated numbers"
+msgstr "%d áńéèìïß śùńéóìĘíïé ìć êüììá"
-#: ../../harddrake/v4l.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Tuner type:"
+msgid ""
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
msgstr ""
+"Ôï đńùôüêïëëï rusers ćđéôńĘđćé óôïőò śńȚóôćò ćíüò äéêôęïő íá \n"
+"đńïóäéïńßóïőí ôïőò óőíäćäćìĘíïőò śńȚóôćò Üëëùí óőóôçìÜôùí."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Card model:"
-msgstr "ÌïíôĘëï êÜńôáò:"
+msgid "Automatic Steps Configuration"
+msgstr "Ńęèìéóç Áőôüìáôùí ÂçìÜôùí"
-#: ../../harddrake/v4l.pm:1
+#: ../../share/advertising/02-community.pl:1
#, fuzzy, c-format
msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
-"Linux\n"
-" ìćôÜ âßáò."
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Unknown|Generic"
-msgstr "¶ăíùóôï|Ăćíéêü"
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "¶ăíùóôï|CPH06X (bt878) [đïëëïß êáôáóêćőáóôĘò]"
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "¶ăíùóôï|CPH05X (bt878) [đïëëïß êáôáóêćőáóôĘò]"
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Auto-detect"
-msgstr "Áőôüìáôç áíßśíćőóç"
-
-#: ../../interactive/newt.pm:1
-#, c-format
-msgid "Do"
-msgstr "ÊÜíôï"
-
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Ç ćđéëïăȚ óáò; (ćî ïńéóìïę %s)"
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
+msgstr "ÈĘëćôć íá ìÜèćôć đćńéóóüôćńá ăéá ôçí êïéíüôçôá Áíïéśôïę Êțäéêá;"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Bad choice, try again\n"
-msgstr "ÊáêȚ ćđéëïăȚ, îáíáäïêéìÜóôć\n"
+msgid "Barbados"
+msgstr "ÌđáńìđÜíôïò"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Re-submit"
-msgstr "ĆéóÜăćôć îáíÜ"
+msgid "Please select data to backup..."
+msgstr "Đáńáêáëț ćđéëĘîôć ôá áńśćßá đïő èá ăßíïőí áíôßăńáöá áóöáëćßáò"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Óçì.:ìéá ćôéêĘôá Üëëáîć:\n"
-"%s"
-
-#: ../../interactive/stdio.pm:1
-#, fuzzy, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
msgstr ""
-"ćđćîćńăáóßá\n"
-"\n"
-" "
+"Ç óęíäćóç áđĘôőść.\n"
+"Ćđáëçèćęóôć ôéò ńőèìßóćéò óáò óôï ÊĘíôńï ĆëĘăśïő Mandrake."
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> ŐđÜńśïőí đïëëÜ đńÜăìáôá áđü ôá ïđïßá ìđïńćßôć íá ćđéëĘîćôć (%s).\n"
+msgid "received"
+msgstr "ëçöèĘíôá"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Ç ćđéëïăȚ óáò; (ćî ïńéóìïę `%s'%s) "
+msgid "/File/_New"
+msgstr "/Áńśćßï/_ÍĘï"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid " enter `void' for void entry"
-msgstr "ćéóÜăćôć ôçí ëĘîç `void' ăéá êćíȚ ćéóáăùăȚ"
+msgid "The DNS Server IP"
+msgstr "Ç IP ôïő ćîőđçńćôçôȚ DNS"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Do you want to click on this button?"
-msgstr "ÈĘëćôć íá êÜíćôć êëéê óć áőôü ôï êïőìđß;"
+msgid "IP Range End:"
+msgstr "Œńéï Ôćńìáôéóìïę IP:"
-#: ../../interactive/stdio.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Button `%s': %s"
-msgstr "ĐëȚêôńï `%s': %s"
+msgid "High"
+msgstr "Őűçëü"
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Ç ćđéëïăȚ óáò; (0/1, ćî ïńéóìïę %s)"
+msgid "NoVideo"
+msgstr "ŚùńßòVideo"
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Đćäßá đïő èá đńĘđćé íá óőìđëçńțóćôć:\n"
-"%s"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "this field describes the device"
+msgstr "Áőôü đćäßï đćńéăńáöȚ ôç óőóêćőȚ"
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Ç öüńôùóç ôïő áńèńțìáôïò %s áđĘôőść.\n"
-"ÈĘëćôć íá äïêéìÜóćôć îáíÜ ìć äéáöïńćôéêĘò đáńáìĘôńïőò;"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Ăßíćôáé đńïóèȚêç ôïő ćêôőđùôȚ óôï Star Office/OpenOffice.org/GIMP"
-#: ../../modules/interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Specify options"
-msgstr "Đńïóäéïńéóìüò đáńáìĘôńùí"
+msgid "Local Printers"
+msgstr "Ôïđéêïß ćêôőđùôĘò"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Autoprobe"
-msgstr "Áőôüìáôç ćîĘôáóç"
+msgid "Installation image directory"
+msgstr "ĆăêáôÜóôáóç êáôáëüăïő ćéêüíáò"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Óć ìćńéêĘò đćńéđôțóćéò, ï ïäçăüò %s śńćéÜæćôáé ćđéđëĘïí đáńáìĘôńïőò ăéá\n"
-"íá ëćéôïőńăȚóćé óùóôÜ, đáń' üëï đïő óőíȚèùò ëćéôïőńăćß êáé śùńßò áőôĘò.\n"
-"Èá èĘëáôć íá äțóćôć ćđéđëĘïí ćđéëïăĘò Ț íá áöȚóćôć ôïí ïäçăü íá ćîćôÜóćé\n"
-"ôï őëéêü óáò ăéá ôéò đáńáìĘôńïőò đïő śńćéÜæćôáé; Ç ćîĘôáóç áőôȚ ßóùò\n"
-"đńïêáëĘóćé đÜăùìá ôïő óőóôȚìáôïò, áëëÜ äćí èá đńïêáëĘóćé âëÜâç."
+msgid "NIS Server"
+msgstr "ĆîőđçńćôçôȚò NIS"
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Đïéüí ïäçăü %s íá äïêéìÜóù;"
+msgid "Port: %s"
+msgstr "Èęńá: %s"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Module options:"
-msgstr "ĆđéëïăĘò áńèńțìáôïò:"
+msgid "Spain"
+msgstr "Éóđáíßá"
-#: ../../modules/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Ìđïńćßôć ôțńá íá äțóćôć ôéò đáńáìĘôńïőò ăéá ôï Üńèńùìá %s.\n"
-"Ïé đáńÜìćôńïé Ęśïőí ôçí ìïńöȚ ``üíïìá=ôéìȚ üíïìá2=ôéìȚ2 ...''.\n"
-"Ăéá đáńÜäćéăìá, ``io=0x300 irq=7''"
+msgid "This user name has already been added"
+msgstr "Áőôü ôï üíïìá śńȚóôç őđÜńśćé Țäç"
-#: ../../modules/interactive.pm:1
+#: ../../interactive.pm:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Ìđïńćßôć ôțńá íá äțóćôć ôéò đáńáìĘôńïőò ăéá ôï Üńèńùìá %s.\n"
-"Óçìćéțóôć üôé êÜèć äéćęèőíóç đńĘđćé íá ćéóÜăćôáé ìć ôï đńüèćìá 0x üđùò "
-"'0x123'"
+msgid "Choose a file"
+msgstr "ĆđéëĘîôć Ęíá áńśćßï"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "(module %s)"
-msgstr "(Üńèńùìá %s)"
+msgid "Apply"
+msgstr "ĆöáńìïăȚ"
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "ĆăêáôÜóôáóç ïäçăïę ăéá %s êÜńôá %s"
+msgid "Auto-detect available ports"
+msgstr "ÄéáèĘóéìćò èęńćò áőôüìáôïő ćíôïđéóìïę"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "See hardware info"
-msgstr "ĐńïâïëȚ đëçńïöïńéțí őëéêïę"
+msgid "Internet Connection Sharing currently disabled"
+msgstr "ÊïéíȚ Óęíäćóç Äéáäéêôęïő áđćíćńăïđïéçìĘíç"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "žśćôć êÜđïéïí đńïóáńìïăĘá %s;"
+msgid "San Marino"
+msgstr "¶ăéïò Ìáńßíïò"
-#: ../../modules/interactive.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Do you have another one?"
-msgstr "žśćôć Üëëïí;"
+msgid "Belgium"
+msgstr "ÂĘëăéï"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Found %s %s interfaces"
-msgstr "ÂńĘèçêáí %s %s đńïóáńìïăćßò"
+msgid "Kuwait"
+msgstr "ÊïőâĘéô"
-#: ../../modules/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "Ćäț ìđïńćßôć íá ńőèìßóćôć ôéò đáńáìĘôńïőò ôïő áńèńțìáôïò."
+msgid "Choose the window manager to run:"
+msgstr "ĆđéëĘîôć ôïí äéáśćéńéóôȚ đáńáèęńùí đïő èĘëćôć íá śńçóéìïđïéȚóćôć:"
-#: ../../modules/parameters.pm:1
-#, c-format
-msgid "comma separated strings"
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "sub generation of the cpu"
+msgstr "Sub"
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "comma separated numbers"
-msgstr "áńéèìïß śùńéóìĘíïé ìć êüììá"
+msgid "First Time Wizard"
+msgstr "Ïäçăüò Đńțôçò ÖïńÜò"
-#: ../../modules/parameters.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "%d comma separated strings"
+msgid ""
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
msgstr ""
+"ĐńïêëȚèçêć Ęíá óöÜëìá đïő äćí îĘńù đțò íá ôï śćéńéóôț.\n"
+"Óőíćśßóôć ìć äéêȚ óáò ćőèęíç."
-#: ../../modules/parameters.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d áńéèìïß śùńéóìĘíïé ìć êüììá"
+msgid "please wait, parsing file: %s"
+msgstr "đáńáêáëț đćńéìĘíćôć, ćđćîćńăáóßá áńśćßïő: %s"
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "a number"
-msgstr "Ęíáò áńéèìüò"
+msgid "Taiwan"
+msgstr "ÔáúâÜí"
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
-msgstr ""
+msgid "Pakistan"
+msgstr "ĐáêéóôÜí"
-#: ../../network/adsl.pm:1
-#, c-format
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Ï đéï êïéíüò ôńüđïò óęíäćóçò adsl ćßíáé pppoe.\n"
-"ÏńéóìĘíćò óőíäĘóćéò śńçóéìïđïéïęí pptp, êÜđïéćò ëßăćò dhcp.\n"
-"ĆÜí äćí îĘńćôć, ćđéëĘîôć 'śńȚóç pppoe'"
-
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
-#, c-format
-msgid "Connect to the Internet"
-msgstr "Óęíäćóç óôï Äéáäßêôőï"
-
-#: ../../network/adsl.pm:1
-#, c-format
-msgid "Sagem (using pppoa) usb"
-msgstr "Sagem (ìć śńȚóç ôïő pppoa) usb"
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
+msgstr "http://www.lexmark. Linux ¶êőńï."
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
+msgid "Permissions"
+msgstr "Äéêáéțìáôá"
-#: ../../network/adsl.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "use dhcp"
-msgstr "śńȚóç dhcp"
+msgid "Provider name (ex provider.net)"
+msgstr "Œíïìá đáńïśĘá (đ.ś. provider.net)"
-#: ../../network/adsl.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "use pptp"
-msgstr "śńȚóç pptp"
+msgid "Version: %s\n"
+msgstr "žêäïóç: %s\n"
-#: ../../network/adsl.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "use pppoe"
-msgstr "śńȚóç pppoe"
+msgid ""
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
+msgstr ""
+"Ôï óęóôçìÜ óáò äćí Ęśćé áńêćôïęò đüńïőò. Ìđïńćß íá áíôéìćôùđßóćôć "
+"đńïâëȚìáôá\n"
+"óôçí ćăêáôÜóôáóç ôïő Mandrake Linux. ĆÜí óőìâćß áőôü, ìđïńćßôć íá äïêéìÜóćôć "
+"ćăêáôÜóôáóç êćéìĘíïő.\n"
+"ĐáôȚóôć F1 êáôÜ ôçí ćêêßíçóç áđü CDROM, ìćôÜ ăńÜűôć `text'."
-#: ../../network/drakfirewall.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Other ports"
-msgstr "¶ëëćò èęńćò"
+msgid "Use the Windows partition for loopback"
+msgstr "ŚńȚóç êáôÜôìçóçò Windows ăéá loopback"
-#: ../../network/drakfirewall.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Everything (no firewall)"
-msgstr "Œëćò (śùńßò ôïßśïò đńïóôáóßáò)"
+msgid "Armenian (typewriter)"
+msgstr "Áńìćíéêü (ăńáöïìçśáíȚ)"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
-msgstr ""
-"Äüèçêć Üêőńç èȚńá: %s.\n"
-"Ôï óùóôü öïńìÜ ćßíáé \"èęńá/tcp\" Ț \"èęńá/udp\", \n"
-"üđïő èȚńá ćßíáé ćßíáé áńéèìüò ìćôáîę 1 êáé 65535."
+msgid "Connection type: "
+msgstr "Ôęđïò óęíäćóçò: "
-#: ../../network/drakfirewall.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
-msgstr ""
-"Ìđïńćßôć íá ćéóÜăćôć äéÜöïńćò èȚńćò.\n"
-"žăêőńá đáńáäćßăìáôá ćßíáé: 139/tcp 139/udp.\n"
-"Äćßôć ôï /etc/services ăéá đëçńïöïńßćò."
+msgid "Graphical interface"
+msgstr "Ăńáöéêü đćńéâÜëëïí"
-#: ../../network/drakfirewall.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr "Đïéćò őđçńćóßćò èĘëćôć íá ćđéôńĘđïíôáé íá óőíäĘïíôáé óôï Äéáäßêôőï;"
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s ìć ćđéôÜśőíóç ôńéóäéÜóôáôùí ăńáöéêțí"
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-"ŃőèìéóôȚò drakfirewall\n"
-"\n"
-"Âćâáéùèćßôć üôé Ęśćôć ńőèìßóćé ôï Äßêôőï/Đńüóâáóç Äéáäéêôęïő ìć ôç śńȚóç ôïő "
-"drakconnect đńéí đńïśùńȚóćôć."
+msgid "India"
+msgstr "Éíäßá"
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"ńęèìéóç tinyfirewall\n"
-"\n"
-"Áőôü ńőèìßæćé ôï đńïóùđéêü óáò firewall ăéá áőôü ôï ìçśÜíçìá Mandrake "
-"Linux.\n"
-"Ăéá ìéá éóśőńȚ áöïóéùìĘíç ëęóç firewall, đáńáêáëț êïéôÜîôć óôçí\n"
-"ćéäéêćőìĘíç MandrakeSecurity Firewall äéáíïìȚ."
+msgid "Chad"
+msgstr "Ôóáíô"
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No network card"
-msgstr "äćí âńĘèçêć êÜńôá äéêôęïő"
+msgid "Slovakia"
+msgstr "Óëïâáêßá"
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "POP and IMAP Server"
-msgstr "ĆîőđçńćôçôȚò POP êáé IMAP"
+msgid "Singapore"
+msgstr "Óéăăáđïęńç"
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mail Server"
-msgstr "ĆîőđçńćôçôȚò Ôáśőäńïìćßïő"
+msgid "Cambodia"
+msgstr "Êáìđüôæç"
-#: ../../network/drakfirewall.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Domain Name Server"
-msgstr "ĆîőđçńćôçôȚò Œíïìá ÔïìĘá"
+msgid "Monitor HorizSync: %s\n"
+msgstr "Óőśíüôçôá ïńéæüíôéáò áíáíĘùóçò: %s\n"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Web Server"
-msgstr "ĆîőđçńćôçôȚò Éóôïóćëßäùí"
+msgid "Path"
+msgstr "ÈĘóç"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Zeroconf host name must not contain a ."
+msgid ""
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
msgstr ""
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
-msgid "Host name"
-msgstr "Œíïìá óőóôȚìáôïò"
-
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Zeroconf Host name"
-msgstr "Äéêôőáêü Œíïìá Zeroconf"
-
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, fuzzy, c-format
msgid ""
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
msgstr ""
+"Ôï óęóôçìá ćêôęđùóçò (%s) äćí èá îćêéíÜ áőôüìáôá êáôÜ ôçí ćêêßíçóç ôïő "
+"ìçśáíȚìáôïò\n"
"\n"
+"ŐđÜńśćé ç đéèáíüôçôá íá Ęśćé áđćíćńăïđïéçèćß ç áőôüìáôç ćêêßíçóç ìć ôçí "
+"áëëáăȚ óć őűçëüôćńï ćđßđćäï áóöáëćßáò, ćđćéäȚ ôï óęóôçìá ćêôęđùóçò ćßíáé Ęíá "
+"ćí äőíÜìćé óçìćßï ćđßèćóçò\n"
"\n"
-"\n"
-" ćî' ïńéóìïę."
-
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
-msgid "Configuring network"
-msgstr "Ńęèìéóç äéêôęïő"
+"ÈĘëćôć íá îáíáćíćńăïđïéçèćß ç áőôüìáôç ćêêßíçóç ôïő óőóôȚìáôïò ćêôęđùóçò;"
-#: ../../network/ethernet.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
+"Printer %s\n"
+"What do you want to modify on this printer?"
msgstr ""
-"Đáńáêáëț ćđéëĘîôć đïéá óőóêćőȚ äéêôęïő èĘëćôć íá śńçóéìïđïéȚóćôć ăéá ôçí "
-"óęíäćóç óôï Äéáäßêôőï"
+"ĆêôőđùôȚò %s\n"
+"Ôé èĘëćôć íá áëëÜîćôć óć áőôüí ôïí ćêôőđùôȚ;"
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Choose the network interface"
-msgstr "ĆđéëĘîôć óőóêćőȚ äéêôęïő"
+msgid "Add host"
+msgstr "ĐńïóèȚêç őđïëïăéóôȚ"
-#: ../../network/ethernet.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
+"\n"
+"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
-"Äćí âńĘèçêć đńïóáńìïăĘáò äéêôęïő Ethernet óôï óęóôçìÜ óáò.\n"
-"Äćí ìđïńț íá ńőèìßóù áőôïę ôïő ôęđïő ôç óęíäćóç."
-#: ../../network/ethernet.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
+"\n"
+"\"Custom\" permit a per-user granularity.\n"
msgstr ""
-"Đïéüí đćëÜôç dhcp èĘëćôć íá śńçóéìïđïéȚóćôć;\n"
-"Ç đńïćđéëïăȚ ćßíáé dhcp-client"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Äćí âńĘèçêć êÜńôá ISDN. Đáńáêáëț ćđéëĘîôć ìéá áđü ôçí đáńáêÜôù ïèüíç."
+"ÈĘëćôć íá ćđéôńĘűćôć óôïőò śńȚóôćò íá Ęśïőí êïéíüśńçóôïőò êáôáëüăïőò;\n"
+"Áí íáé ôüôć ïé śńȚóôćò èá ìđïńïęí áđëÜ íá êÜíïőí êëéê óôï \"Êïéíüśńçóôï\" "
+"óôïí konqueror êáé ôï nautilus.\n"
+"\n"
+"Ôï \"ĐńïóáńìïóìĘíï\" ćđéôńĘđćé ôçí áíÜ śńȚóôç ńęèìéóç.\n"
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
msgstr ""
-"Ćíôüđéóá ìéá ISDN êÜńôá, áëëÜ äćí îĘńù ôïí ôęđï ôçò. Đáńáêáëț ćđéëĘîôć ìéá "
-"êÜńôá PCI áđü ôçí đáńáêÜôù ïèüíç."
+"Đáńáêáëț ćđéëĘîôć ôç öüńôùóç Ț áđïèȚêćőóç ôùí ćđéëïăȚò đáêĘôùí óôç äéóêĘôá.\n"
+"Ç ìïńöïđïßçóç ćßíáé ç ßäéá ìć ôéò äéóêĘôćò áőôüìáôçò ćăêáôÜóôáóçò."
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Đïéá áđü ôéò đáńáêÜôù êÜńôćò ISDN ćßíáé ç äéêéÜ óáò;"
+msgid "China (broadcast)"
+msgstr "Êßíá (ćíáĘńéá)"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "ISDN Configuration"
-msgstr "Ńőèìßóćéò ISDN"
+msgid "Use quota for backup files."
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Abort"
-msgstr "Áêęńùóç"
+msgid "Configuring printer \"%s\"..."
+msgstr "Ńęèìéóç ćêôőđùôȚ \"%s\"..."
-#: ../../network/isdn.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Continue"
-msgstr "ÓőíĘśćéá"
+msgid "Internet connection"
+msgstr "Óęíäćóç Äéáäéêôęïő"
-#: ../../network/isdn.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
msgstr ""
-"\n"
-"ĆÜí Ęśćôć ISA êÜńôá, ïé ôéìĘò óôçí ćđüìćíç ïèüíç èá đńĘđćé íá ćßíáé óùóôĘò.\n"
-"\n"
-"ĆÜí Ęśćôć PCMCIA êÜńôá, đńĘđćé íá îĘńćôć ôï irq êáé ôï io ôçò êÜńôáò óáò.\n"
+"Ç öüńôùóç ôïő áńèńțìáôïò %s áđĘôőść.\n"
+"ÈĘëćôć íá äïêéìÜóćôć îáíÜ ìć äéáöïńćôéêĘò đáńáìĘôńïőò;"
-#: ../../network/isdn.pm:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "I don't know"
-msgstr "Äćí îĘńù"
+msgid "Welcome to the Open Source world."
+msgstr "Êáëțò ïńßóáôć óôïí êüóìï ôïő Áíïéśôïę Êțäéêá"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "PCI"
-msgstr "PCI"
+msgid "Bosnia and Herzegovina"
+msgstr "Âïóíßá-Ćńæćăïâßíç"
-#: ../../network/isdn.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid ""
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
+msgstr ""
+"ŚńćéÜæćóôć Ęíá đńáăìáôéêü óęóôçìá áńśćßùí (ext2/ext3, reiserfs, xfs, or jfs) "
+"ăéá áőôü ôï óçìćßï óęíäćóçò\n"
-#: ../../network/isdn.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "What kind of card do you have?"
-msgstr "Ôé ćßäïőò êÜńôáò Ęśćôć;"
+msgid "You must enter a host name or an IP address.\n"
+msgstr "ĐńĘđćé íá ïńßóôć ôïí äéêôőáêü üíïìá Ț ôçí IP äéćęèőíóç.\n"
-#: ../../network/isdn.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr "ÂńĘèçêć ìéá äéćđáöȚ \"%s\" èĘëćôć íá ôç śńçóéìïđïéȚóćôć ;"
+msgid "Netherlands"
+msgstr "Ïëëáíäßá"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Đïéï đńùôüêïëëï èĘëćôć íá śńçóéìïđïéȚóćôć;"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "ÁđïóôïëȚ áńśćßùí..."
#: ../../network/isdn.pm:1
#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Đńùôüêïëëï őđüëïéđïő êüóìïő"
+msgid "Internal ISDN card"
+msgstr "ĆóùôćńéêȚ êÜńôá ISDN"
-#: ../../network/isdn.pm:1
-#, c-format
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
msgstr ""
-"Đńùôüêïëëï őđüëïéđïő êüóìïő\n"
-" śùńßò D-Channel (ìéóèùìĘíćò ăńáììĘò)"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "European protocol"
-msgstr "Ćőńùđáúêü đńùôüêïëëï"
+"Äćí őđÜńśćé ăíùóôüò ćíáëëáêôéêüò ïäçăüò OSS/ALSA ăéá ôçí êÜńôá Țśïő óáò (%s)"
-#: ../../network/isdn.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Ćőńùđáúêü Đńùôüêïëëï (EDSS1)"
+msgid "Title"
+msgstr "Ôßôëïò"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
-msgstr ""
-"ĆđéëĘîôć ôïí đáńïśĘá óáò\n"
-" ĆÜí äćí ćßíáé óôïí êáôÜëïăï, ćđéëĘîôć Unlisted"
+msgid "Install & convert Fonts"
+msgstr "ĆăêáôÜóôáóç & ìćôáôńïđȚ Ăńáììáôïóćéńțí"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "External ISDN modem"
-msgstr "Ćîùôćńéêü ISDN modem"
+msgid "WARNING"
+msgstr "ĐŃÏÓÏŚÇ"
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Internal ISDN card"
-msgstr "ĆóùôćńéêȚ êÜńôá ISDN"
+msgid "Installing bootloader"
+msgstr "Đńüăńáììá ćêêßíçóçò"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "Ôé ćßäïőò ćßíáé ç ISDN óęíäćóȚ óáò;"
+msgid "replay"
+msgstr "ćđáíÜëçűç"
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Network Configuration Wizard"
-msgstr "Ïäçăüò Ńęèìéóçò Äéêôęïő"
+msgid "detected %s"
+msgstr "áíéśíćęèçêć ôï %s"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "ĐáëéÜ ńęèìéóç (isdn4net)"
+msgid "Virgin Islands (U.S.)"
+msgstr "ĐáńèĘíïé ÍȚóïé(ÁìćńéêáíéêĘò)"
-#: ../../network/isdn.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "New configuration (isdn-light)"
-msgstr "ÍĘá ńęèìéóç (isdn-light)"
+msgid "Bad backup file"
+msgstr "ÊáôćóôńáììĘíï ćöćäńéêü áńśćßï"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
"\n"
-"We recommand the light configuration.\n"
+"What would you like to do?"
msgstr ""
-"Đïéá ISDN ńęèìéóç đńïôéìÜôć;\n"
-"\n"
-"* Ç đáëéÜ ńęèìéóç śńçóéìïđïéćß ôï isdn4net. ĐćńéĘśćé śńȚóéìá ćńăáëćßá,\n"
-" áëëÜ ćßíáé ëßăï äęóêïëï ăéá Ęíáí áńśÜńéï íá ńőèìéóôćß êáé üśé óôćńćüôőđï.\n"
-"\n"
-"* Ç ÍĘá ńęèìéóç ćßíáé ćőêïëüôćńç óôçí êáôáíüçóç, đćńéóóüôćńï óôćńćüôőđç,\n"
-" áëëÜ ìć ëéăüôćńá ćńăáëćßá.\n"
-"\n"
-"Đńïôćßíïőìć ôçí ćëáöńéÜ ńęèìéóç.\n"
+"Ç ńęèìéóç ôçò êïéíȚò śńȚóçò äéáäéêôęïő Ęśćé Țäç ăßíćé.\n"
+"Ćßíáé áđćíćńăïđïéçìĘíç.\n"
"\n"
+"Ôé èĘëćôć íá êÜíćôć:"
-#: ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do nothing"
-msgstr "Ìçí êÜíćéò ôßđïôá"
+msgid "Enter IP address and port of the host whose printers you want to use."
+msgstr ""
-#: ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Install rpm"
-msgstr "ĆăêáôÜóôáóç rpm"
+msgid "Pipe into command"
+msgstr "ÄéáóùëȚíùóç ćńăáóßáò óć ćíôïëȚ"
-#: ../../network/modem.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
msgstr ""
-"âńĘèçêć Ęíá \"%s\" winmodem, èĘëćôć íá ćăêáôáóôȚóćôć ôï áđáńáßôçôï "
-"ëïăéóìéêü ;"
+"žíá ìĘńïò ôïő őëéêïę óáò śńćéÜæćôáé ``éäéüêôçôïőò'' ïäçăïęò ăéá íá "
+"ëćéôïőńăȚóćé.\n"
+"Ìđïńćßôć íá âńćßôć óśćôéêĘò đëçńïöïńßćò óôï: %s"
-#: ../../network/modem.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Title"
-msgstr "Ôßôëïò"
+msgid "Detecting devices..."
+msgstr "Ćíôïđéóìüò óőóêćőțí..."
-#: ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Click here to launch the wizard ->"
+msgstr "ÊÜíôć êëéê ćäț ăéá íá îćêéíȚóćé ï ïäçăüò ->"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Haiti"
+msgstr "ÁúôȚ"
+
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
+"Description of the fields:\n"
+"\n"
msgstr ""
-"Ôï ìüíôćì óáò äćí őđïóôçńßæćôáé áđü ôï óęóôçìá.\n"
-"Ńßîôć ìéá ìáôéÜ óôï http://www.linmodems.org"
+"ĐćńéăńáöȚ ôùí đćäßùí:\n"
+"\n"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Äćęôćńïò ćîőđçńćôçôȚò DNS (đńïáéńćôéêü)"
+msgid "the name of the CPU"
+msgstr "ôï üíïìá êáôáóêćőáóôȚ ôïő ćđćîćńăáóôȚ"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Đńțôïò ćîőđçńćôçôȚò DNS (đńïáéńćôéêü)"
+msgid "Refreshing printer data..."
+msgstr "ÁíáíĘùóç äćäïìĘíùí ćêôőđùôȚ..."
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../install2.pm:1
#, c-format
-msgid "Domain name"
-msgstr "Œíïìá ÔïìĘá"
+msgid "You must also format %s"
+msgstr "ĐńĘđćé ćđßóçò íá ìïńöïđïéȚóćôć ôï %s"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "CHAP"
-msgstr "CHAP"
+msgid "Be careful: this operation is dangerous."
+msgstr "ĐńïóïśȚ: ÁőôȚ ç äéáäéêáóßá ćßíáé ćđéêßíäőíç."
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Script-based"
-msgstr "ŚńȚóç script"
+msgid "Insert a floppy containing package selection"
+msgstr "ĆéóÜăćôć äéóêĘôá đïő đćńéĘśćé ôçí ćđéëïăȚ đáêĘôùí"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Terminal-based"
-msgstr "ŚńȚóç ôćńìáôéêïę"
+msgid "Server: "
+msgstr "ĆîőđçńćôçôȚò:"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid "Security Alerts:"
+msgstr "ĆéäïđïéȚóćéò Áóöáëćßáò:"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Login ID"
-msgstr "'Œíïìá ŚńȚóôç"
+msgid "Sweden"
+msgstr "Óïőçäßá"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Phone number"
-msgstr "Áńéèìüò ôçëćöțíïő"
+msgid "Use Expect for SSH"
+msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connection name"
-msgstr "Œíïìá óęíäćóçò"
+msgid "Poland"
+msgstr "Đïëùíßá"
-#: ../../network/modem.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Dialup options"
-msgstr "ĆđéëïăĘò Óęíäćóçò"
+msgid "Importance: %s\n"
+msgstr "Óđïőäáéüôçôá: %s\n"
-#: ../../network/modem.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Óć đïéá óćéńéáêȚ đüńôá ćßíáé óőíäćäćìĘíï ôï ìüíôćì óáò;"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr ""
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Network Configuration"
-msgstr "Ńőèìßóćéò äéêôęïő"
+msgid "Other ports"
+msgstr "¶ëëćò èęńćò"
-#: ../../network/netconnect.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
+msgid "number of capture buffers for mmap'ed capture"
msgstr ""
-"ĐńïâëȚìáôá êáôÜ ôç ńęèìéóç.\n"
-"ÄïêéìÜóôć ôç óęíäćóç ìć ôï net_monitor Ț ôï mcc. Áí äćí ëćéôïőńăȚóćé ç "
-"óęíäćóç, ôüôć èá đńĘđćé íá ćêêéíȚóćôć îáíÜ ôç ńęèìéóç."
-#: ../../network/netconnect.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Áöïę ăßíćé áőôü, đńïôćßíïőìć íá ćđáíćêêéíȚóćôć ôï Ś đćńéâÜëëïí ăéá íá "
-"áđïöęăćôć ôá đńïâëȚìáôá áëëáăȚò äéêôőáêïę ïíüìáôïò."
+msgid "SMBus controllers"
+msgstr "ĆëćăêôĘò SMBus"
-#: ../../network/netconnect.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"ÓőăśáńçôȚńéá, ç ńęèìéóç äéêôęïő êáé äéáäéêôęïő ôćëćßùóć.\n"
-"Ïé ńőèìßóćéò èá ćöáńìïóôïęí ôțńá óôï óęóôçìÜ óáò.\n"
-"\n"
+msgid "Connection timeout (in sec)"
+msgstr "Śńüíïò ćêôüò óęíäćóçò (óć äćęôćńá)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
msgstr ""
-"žíá đńüâëçìá ćìöáíßóôçêć êáôÜ ôçí ćđáíćêêßíçóç ôïő äéêôęïő: \n"
-"\n"
-"%s"
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr "Ôï äßêôőï đńĘđćé íá ćđáíćêêéíçèćß, ÈĘëćôć íá ôï ćđáíćêêéíȚóćôć ;"
+msgid "Croatian"
+msgstr "Êńïáôéêü"
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Network configuration"
-msgstr "Ńőèìßóćéò äéêôęïő"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Use existing partition"
+msgstr "ŚńȚóç őđáńśïőóțí êáôáôìȚóćùí"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Unable to contact mirror %s"
+msgstr "Áäőíáìßá fork: %s"
+
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "ÈĘëćôć íá óőíäĘćóôć êáôÜ ôçí ćêêßíçóç;"
+msgid "/Help/_About..."
+msgstr "/ÂïȚèćéá/_ÓśćôéêÜ ìć..."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Internet connection"
-msgstr "Óęíäćóç Äéáäéêôęïő"
+msgid "Remove user directories before restore."
+msgstr "Áöáßńćóç êáôáëüăùí śńçóôțí đńéí áđü ôçí ćđáíáöïńÜ."
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
msgstr ""
-"žśćôć ńőèìßóćé đïëëïęò ôńüđïőò ăéá íá óőíäĘćóôć óôï Äéáäßêôőï.\n"
-"ĆđéëĘîôć áőôüí đïő èĘëćôć íá śńçóéìïđïéȚóćôć.\n"
-"\n"
+"Èá ńőèìßóćôć Ęíáí áđïìáêńőóìĘíï ćêôőđùôȚ. Áőôü áđáéôćß Ęíá đńïóâÜóéìï "
+"äßêôőï, áëëÜ ôï äßêôőï äćí Ęśćé ńőèìéóôćß áêüìá. Áí óőíćśßóćôć śùńßò íá "
+"ńőèìßóćôć ôï äßêôőï äćí èá ìđïńĘóćôć íá êÜíćôć śńȚóç ôïő ćêôőđùôȚ đïő "
+"ńőèìßæćôć. Ôé èĘëćôć íá êÜíćôć;"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "CUPS printer configuration"
+msgstr "Ńőèìßóćéò êïéíȚò śńȚóçò ćêôőđùôțí CUPS"
+
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "ĆđéëĘîôć ôç óęíäćóç đïő èĘëćôć íá ńőèìßóćôć"
+msgid "could not find any font in your mounted partitions"
+msgstr "äćí âńĘèçêáí ăńáììáôïóćéńĘò óôéò đńïóáńôçìĘíćò êáôáôìȚóćéò"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "ethernet card(s) detected"
-msgstr "áíéśíćęèçêáí êÜńôá(ćò) ethernet"
+msgid "F00f bug"
+msgstr "ÓöÜëìá F00f"
-#: ../../network/netconnect.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "LAN connection"
-msgstr "Óęíäćóç LAN"
+msgid "XFree %s"
+msgstr "XFree %s"
-#: ../../network/netconnect.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "cable connection detected"
-msgstr "áíéśíćęèçêć êáëùäéáêȚ óęíäćóç"
+msgid ""
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
+msgstr ""
+"Đïéüí đćëÜôç dhcp èĘëćôć íá śńçóéìïđïéȚóćôć;\n"
+"Ç đńïćđéëïăȚ ćßíáé dhcp-client"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Cable connection"
-msgstr "ÊáëùäéáêȚ óęíäćóç"
+msgid "Domain Name:"
+msgstr "Œíïìá ÔïìĘá:"
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "detected"
-msgstr "áíéśíćęèçêć"
+msgid "On Floppy"
+msgstr "Óôçí ÄéóêĘôá"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "ADSL connection"
-msgstr "Óęíäćóç ADSL"
+msgid "Restore"
+msgstr "ĆđáíáöïńÜ"
-#: ../../network/netconnect.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "detected %s"
-msgstr "áíéśíćęèçêć ôï %s"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
+msgstr ""
+"áí ïńéóôćß íáé, Ęëćăśïò ôùí óőóêćőțí äéêôęïő ăéá áäéÜêńéôç êáôÜóôáóç "
+"ëćéôïőńăßáò."
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "ISDN connection"
-msgstr "Óęíäćóç ISDN"
+msgid "Looking for available packages..."
+msgstr "ŰÜśíù ăéá äéáèĘóéìá đáêĘôá..."
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Winmodem connection"
-msgstr "Óęíäćóç Winmodem"
+msgid "Init Message"
+msgstr "ÌȚíőìá Init"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "detected on port %s"
-msgstr "áíéśíćęèçêć óôçí đüńôá %s"
+msgid "Rescue partition table"
+msgstr "Đßíáêáò êáôáôìȚóćùí äéÜóùóçò"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Normal modem connection"
-msgstr "ÁđëȚ óęíäćóç ìć ìüíôćì"
+msgid "Connection complete."
+msgstr "Ç óęíäćóç Ęăéíć."
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Detecting devices..."
-msgstr "Ćíôïđéóìüò óőóêćőțí..."
+msgid "Cyprus"
+msgstr "Êęđńïò"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Expert Mode"
-msgstr "Ăéá ĐńïśùńçìĘíïőò"
+msgid "Remove from RAID"
+msgstr "Áöáßńćóç áđü ôï RAID"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Use auto detection"
-msgstr "ŚńȚóç áőôüìáôçò áíßśíćőóçò"
+msgid "This encryption key is too simple (must be at least %d characters long)"
+msgstr ""
+"Áőôüò ï êùäéêüò đńüóâáóçò ćßíáé đïëę áđëüò (đńĘđćé íá Ęśćé ôïőëÜśéóôïí %d "
+"śáńáêôȚńćò)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Choose the profile to configure"
-msgstr "ĆđéëĘîôć ôï đńïößë ăéá ńęèìéóç"
+msgid "Configuration Wizards"
+msgstr "Ïäçăïß Ńęèìéóçò"
#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Êáëțò Țëèáôć óôïí Ïäçăü Ńęèìéóçò Äéêôęïő\n"
-"\n"
-"Ćßìáóôć Ęôïéìïé íá ńőèìßóïőìć ôç óęíäćóȚ óáò óôï äéáäßêôőï/äßêôőï.\n"
-"Áí äćí èĘëćôć íá śńçóéìïđïéȚóćôć ôçí áőôüìáôç áíßśíćőóç, áđïćđéëĘîôć ôï "
-"êïőôÜêé.\n"
+msgid "ISDN connection"
+msgstr "Óęíäćóç ISDN"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"ĆđćéäȚ êÜíćôć ìéá äéêôőáêȚ ćăêáôÜóôáóç, ôï äßêôőï ćßíáé Țäç ńőèìéóìĘíï.\n"
-"ÊÜíôć êëéê óôï ĆíôÜîćé ăéá íá äéáôçńȚóćôć ôéò ńőèìßóćéò óáò, Ț Üêőńï ăéá íá "
-"îáíáńőèìßóćôć ôç óęíäćóç óôï Äéáäßêôőï.\n"
+msgid "primary"
+msgstr "đńùôćęïőóá"
-#: ../../network/netconnect.pm:1
+#: ../../printer/main.pm:1
#, c-format
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr "óôïí ćîőđçńćôçôȚ SMB/Windows \"%s\", êïéíüśńçóôï \"%s\""
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
"\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
"\n"
-"We are now going to configure the %s connection.\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
+msgstr ""
"\n"
"\n"
-"Press OK to continue."
-msgstr ""
"\n"
"\n"
"\n"
-"Ôțńá èá ńőèìßóïőìć ôçí %s óęíäćóç.\n"
"\n"
"\n"
-"ĐáôȚóôć ôï OK ăéá íá îćêéíȚóćôć"
+"\n"
+" ćî' ïńéóìïę\n"
+"\n"
+"\n"
+" ćîőđçńćôçôȚò\n"
+"\n"
+" ćîőđçńćôçôȚò\n"
+"!"
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Ôțńá èá ńőèìßóïőìć ôçí %s óęíäćóç."
+msgid "Skip"
+msgstr "ĐáńÜëćéűç"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet connection & configuration"
-msgstr "Óęíäćóç êáé ńęèìéóç Äéáäéêôęïő"
+msgid "Niue"
+msgstr "Íßïőć"
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Configure the connection"
-msgstr "Ńęèìéóç ôçò óęíäćóçò"
+msgid ""
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
+msgstr ""
+"Ćíćńăïđïéćß/áđćíćńăïđïéćß üëá ôá őđïóőóôȚìáôá äéêôęïő đïő Ęśïőí \n"
+"ńőèìéóôćß íá îćêéíïęí êáôÜ ôçí ćêêßíçóç."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Disconnect"
-msgstr "Áđïóęíäćóç"
+msgid ""
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Connect"
-msgstr "Óęíäćóç"
+msgid "important"
+msgstr "óçìáíôéêü"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
+msgid "Total Progress"
+msgstr "ÓőíïëéêȚ Đńüïäïò"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
"\n"
-"You can reconfigure your connection."
-msgstr ""
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
-"Ìđïńćßôć íá ćđáíáńőèìßóćôć ôç óęíäćóȚ óáò."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid ""
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
"\n"
-"You can connect to the Internet or reconfigure your connection."
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
msgstr ""
+"IDE\n"
+" PCI\n"
+"\n"
+"\n"
+"\n"
+" PCI Íáé\n"
+" Œśé\n"
+"\n"
+" áíéśíćęèçêć\n"
+" Ćđüìćíï Ćđüìćíï\n"
+"\n"
"\n"
-"Ìđïńćßôć íá óőíäćèćßôć óôï Äéáäßêôőï Ț íá ćđáíáńőèìßóćôć ôç óęíäćóȚ óáò."
+" PCI\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "ÁőôȚ ôç óôéăìȚ äćí ćßóôć óőíäćäćìĘíïé óôï Äéáäßêôőï."
+msgid "Users"
+msgstr "ŚńȚóôćò"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Ìđïńćßôć íá áđïóőíäćèćßôć Ț íá ćđáíáńőèìßóćôć ôç óęíäćóȚ óáò."
+msgid "Aruba"
+msgstr "Áńïęìđá"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "You are currently connected to the Internet."
-msgstr "ÁőôȚ ôç óôéăìȚ ćßóôć óőíäćäćìĘíïé óôï Äéáäßêôőï."
+msgid "Preparing bootloader..."
+msgstr "Đńïćôïéìáóßá đńïăńÜììáôïò ćêêßíçóçò..."
#: ../../network/network.pm:1
#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "Ôï URL đńĘđćé íá îćêéíÜ ìć 'http:' Ț 'ftp:'"
+msgid "Gateway (e.g. %s)"
+msgstr "Đęëç (đ.ś. %s)"
-#: ../../network/network.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Proxy should be http://..."
-msgstr "Ï proxy đńĘđćé íá ćßíáé http://..."
+msgid "The passwords do not match"
+msgstr "Ïé êùäéêïß đńüóâáóçò ćßíáé áíüìïéïé"
-#: ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "FTP proxy"
-msgstr "FTP proxy"
+msgid "Examples for correct IPs:\n"
+msgstr "Đáńáäćßăìáôá óùóôțí IP:\n"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
+msgid "Frequency (MHz)"
+msgstr "Óőśíüôçôá (MHz)"
-#: ../../network/network.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Proxies configuration"
-msgstr "Ńőèìßóćéò proxies"
+msgid ""
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
+msgstr ""
+"Ăéá íá śńçóéìïđïéȚóćôć áőôȚí ôçí áđïèçêćőìĘíç ćđéëïăȚ đáêĘôùí, îćêéíȚóôć ôçí "
+"ćăêáôÜóôáóç ìć ``linux defcfg=floppy''"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "Ç IP äéćęèőíóç ôçò đęëçò đńĘđćé íá ćßíáé ôçò ìïńöȚò 1.2.3.4"
+msgid "the number of the processor"
+msgstr "Ï áńéèìüò ôïő ćđćîćńăáóôȚ"
-#: ../../network/network.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "Ç IP äéćęèőíóç DNS đńĘđćé íá ćßíáé ôçò ìïńöȚò 1.2.3.4"
+msgid "Hardware clock set to GMT"
+msgstr "Ôï ńïëüé ôïő őđïëïăéóôȚ óáò ćßíáé ńőèìéóìĘíï óć GMT (țńá Ăêńßíïőéôò)"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Gateway device"
-msgstr "ÓőóêćőȚ đęëçò"
+msgid "Give a file name"
+msgstr "Äțóôć Ęíá üíïìá áńśćßïő"
-#: ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Đęëç (đ.ś. %s)"
+msgid "Please choose the port that your printer is connected to."
+msgstr "ĆđéëĘîôć óć đïßá èȚńá ćßíáé óőíäćäćìĘíïò ï ćêôőđùôȚò óáò."
-#: ../../network/network.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "DNS server"
-msgstr "ĆîőđçńćôçôȚò DNS"
+msgid "Change Cd-Rom"
+msgstr "ÁëëáăȚ Cd-Rom"
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
-msgstr ""
-"Đáńáêáëț ćéóÜăćôć ôï üíïìá ôïő óőóôȚìáôïò.\n"
-"Ôï üíïìá áőôü đńĘđćé íá ćßíáé Ęíá đëȚńćò üíïìá óőóôȚìáôïò,\n"
-"üđùò đ.ś. ``mybox.mylab.myco.com''.\n"
-"Ìđïńćßôć ćđßóçò íá ćéóÜăćôć êáé ôçí äéćęèőíóç IP ôçò đęëçò äéêôęïő"
+msgid "Paraguay"
+msgstr "ĐáńáăïőÜç"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
msgstr ""
-#: ../../network/network.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
-msgstr ""
+msgid "There's no known driver for your sound card (%s)"
+msgstr "Äćí őđÜńśćé êÜđïéïò ăíùóôüò ïäçăüò ăéá ôçí êÜńôá Țśïő óáò (%s)"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Ç IP äéćęèőíóç đńĘđćé íá ćßíáé óć ìïńöȚ 1.2.3.4"
+msgid "force"
+msgstr "ìćôÜ âßáò"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Start at boot"
-msgstr "Óôçí ćêêßíçóç óőóôȚìáôïò"
-
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Assign host name from DHCP address"
-msgstr "ĐńĘđćé íá ïńßóôć ôïí äéêôőáêü üíïìá Ț ôçí IP äéćęèőíóç.\n"
-
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Network Hotplugging"
-msgstr "Ńőèìßóćéò äéêôęïő"
+msgid "Exit"
+msgstr "žîïäïò"
-#: ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Track network card id (useful for laptops)"
+msgid ""
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
msgstr ""
-"ÁíáæȚôçóç ôáőôüôçôáò ôçò êÜńôáò äéêôęïő (śńȚóéìï ăéá öïńçôïęò őđïëïăéóôĘò)"
-
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "DHCP host name"
-msgstr "Œíïìá óőóôȚìáôïò"
+"Óçì.: ÁíÜëïăá ìć ôï ìïíôĘëï ôïő ćêôőđùôȚ êáé ôï óęóôçìá ćêôęđùóçò èá "
+"ćăêáôáóôáèćß ćđéđëĘïí ìĘśńé êáé %d MB ëïăéóìéêü"
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Netmask"
-msgstr "ÌÜóêá äéêôęïő"
+msgid ""
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
+msgstr ""
+"Äćí Ęśćôć êÜđïéá ńőèìéóìĘíç äéćđáöȚ.\n"
+"Ńőèìßóôć ôçí êÜíïíôáò êëéê óôï 'Ńęèìéóç'"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "IP address"
-msgstr "Äéćęèőíóç IP"
+msgid "Estonian"
+msgstr "Ćóèïíéêü"
-#: ../../network/network.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp/zeroconf)"
+msgid ""
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
+msgstr ""
+"Ï Apache ćßíáé Ęíáò ćîőđçńćôçôȚò WWW. Ìđïńćß íá ćîőđçńćôȚóćé áńśćßá\n"
+"HTML êáé CGI."
-#: ../../network/network.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Automatic IP"
-msgstr "Áőôüìáôï IP"
+msgid "Add/Del Clients"
+msgstr "ĐńïóèȚêç/Áöáßńćóç Đćëáôțí"
-#: ../../network/network.pm:1
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid " (driver %s)"
-msgstr " (ïäçăüò %s)"
+msgid "Choose the network interface"
+msgstr "ĆđéëĘîôć óőóêćőȚ äéêôęïő"
-#: ../../network/network.pm:1
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configuring network device %s"
-msgstr "Ńęèìéóç óőóêćőȚò äéêôęïő %s"
+msgid "Unknown Model"
+msgstr "¶ăíùóôï ÌïíôĘëï"
-#: ../../network/network.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Đáńáêáëț ćéóÜăćôć ôéò IP ńőèìßóćéò ăéá áőôü ôï óęóôçìá.\n"
-"ÊÜèć óôïéśćßï đńĘđćé íá ćéóáśèćß ùò IP äéćęèőíóç ìć áńéèìïęò\n"
-"śùńéóìĘíïőò ìć ôćëćßćò (đáńÜäćéăìá: 1.2.3.4)."
+msgid "CD/DVD burners"
+msgstr "ÓőóêćőĘò ćăăńáöȚò CD/DVD"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
msgstr ""
-"ĐŃÏÓÏŚÇ: ÁőôȚ ç óőóêćőȚ ćßíáé Țäç ńőèìéóìĘíç ăéá íá óőíäĘćôáé ìć ôï "
-"Äéáäßêôőï.\n"
-"ÁđëÜ đáôȚóôć OK ăéá íá êńáôȚóćôć ôéò őđÜńśïőóćò ńőèìßóćéò.\n"
-"ÁëëÜæïíôáò ôá đáńáêÜôù đćäßá èá áëëÜîćôć ôçí őđÜńśïőóá ńęèìéóç."
+"ÊáôÜôìçóç ćêêßíçóçò ćî ïńéóìïę\n"
+" (áđü MS-DOS, üśé áđü lilo)\n"
-#: ../../network/shorewall.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
-msgstr ""
-"ĐńïóïśȚ! Áíéśíćęèçêć ìéá Țäç őđÜńśïőóá ńęèìéóç Ôïßśïőò Đńïóôáóßáò. șóùò "
-"śńćéáóôïęí ïńéóìĘíćò śćéńïêßíçôćò ńőèìßóćéò ìćôÜ ôçí ćăêáôÜóôáóç."
+msgid "choose image"
+msgstr "ćđéëĘîôć ćéêüíá"
#: ../../network/shorewall.pm:1
#, c-format
msgid "Firewalling configuration detected!"
msgstr "Áíéśíćęèçêć ńęèìéóç ôïő Ôïßśïőò Đńïóôáóßáò!"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Account Password"
-msgstr "Êùäéêüò Đńüóâáóçò"
-
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Account Login (user name)"
-msgstr "Ëïăáńéáóìüò Óęíäćóçò (üíïìá śńȚóôç)"
-
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Śńüíïò ćêôüò óęíäćóçò (óć äćęôćńá)"
+msgid "Connection name"
+msgstr "Œíïìá óęíäćóçò"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Connection speed"
-msgstr "Ôáśęôçôá óęíäćóçò"
+msgid ""
+"x coordinate of text box\n"
+"in number of characters"
+msgstr ""
+"óőíôćôáăìĘíç x ôïő đëáéóßïő êćéìĘíïő\n"
+"óć áńéèìü śáńáêôȚńùí"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Dialing mode"
-msgstr "Ôńüđïò êëȚóçò"
+msgid "Updating package selection"
+msgstr "ÁíáíĘùóç ćđéëćăìĘíùí đáêĘôùí"
-#: ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Choose your country"
-msgstr "ĆđéëĘîôć śțńá"
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "Đïę èĘëćôć íá óőíäĘóćôć ôï áńśćßï loopback %s;"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "dns 2 ĐáńïśĘá (đńïáéńćôéêü)"
+msgid ""
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
+msgstr ""
+"Ç äéóêĘôá äçìéïőńăȚèçêć ìć ćđéôőśßá.\n"
+"Ìđïńćßôć ôțńá íá ćđáíáëÜâćôć ôçí ćăêáôÜóôáóç."
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "dns 1 ĐáńïśĘá (đńïáéńćôéêü)"
+msgid "the number of buttons the mouse has"
+msgstr "Ï áńéèìüò ôùí đëȚêôńùí ôïő đïíôéêéïę"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Provider phone number"
-msgstr "Áńéèìüò ôçëćöțíïő đáńïśĘá"
+msgid ""
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Œíïìá đáńïśĘá (đ.ś. provider.net)"
+msgid "Replay"
+msgstr "Ćđáíáöüńôùóç"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Your personal phone number"
-msgstr "Đńïóùđéêüò áńéèìüò ôçëćöțíïő"
+msgid "Backup other files"
+msgstr "Áíôßăńáöá áóöáëćßáò Üëëùí áńśćßùí"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Card IO_1"
-msgstr "IO_1 êÜńôáò"
+msgid "No floppy drive available"
+msgstr "Äćí őđÜńśćé äéáèĘóéìïò ïäçăüò äéóêĘôáò"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Card IO_0"
-msgstr "IO_0 êÜńôáò"
+msgid "Backup files are corrupted"
+msgstr "Ôá áíôßăńáöá áóöáëćßáò ćßíáé êáôćóôńáììĘíá"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Card IO"
-msgstr "IO êÜńôáò"
+msgid "TV norm:"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Card mem (DMA)"
-msgstr "DMA êÜńôáò"
+msgid "Cpuid family"
+msgstr "ÏéêïăĘíćéá Cpuid"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Card IRQ"
-msgstr "IRQ êÜńôáò"
+msgid "32 MB"
+msgstr "32 MB"
-#: ../../network/tools.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please fill or check the field below"
-msgstr "Đáńáêáëț ćëĘăîôć Ț óőìđëçńțóôć ôï đáńáêÜôù đćäßï"
+msgid "Lithuanian AZERTY (new)"
+msgstr "Ëéèïőáíéêü AZERTY (íĘï)"
-#: ../../network/tools.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Connection Configuration"
-msgstr "Ńőèìßóćéò óęíäćóçò"
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgstr ""
-#: ../../network/tools.pm:1
-#, c-format
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
msgstr ""
-"Ôï óęóôçìá öáßíćôáé íá ìçí ćßíáé óőíäćìĘíï óôï Äéáäßêôőï\n"
-"ĐńïóđáèȚóôć íá îáíáńőèìßóćôć ôç óęíäćóȚ óáò."
+"\n"
+" Œśé\n"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Ăéá ëüăïőò áóöáëćßáò, èá áđïóőíäćèćßôć ôțńá."
+msgid "Previous"
+msgstr "Đńïçăïęìćíï"
-#: ../../network/tools.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Ôï óęóôçìá ćßíáé ôțńá óőíäćìĘíï óôï Äéáäßêôőï."
+msgid "Other OS (MacOS...)"
+msgstr "¶ëëï ëćéôïőńăéêü (MacOS...)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Testing your connection..."
-msgstr "ÄïêéìȚ óęíäćóçò... "
+msgid "To activate the mouse,"
+msgstr "Ăéá ćíćńăïđïßçóç đïíôéêéïę"
-#: ../../network/tools.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "ÈĘëćôć íá äïêéìÜóćôć íá óőíäćèćßôć óôï Äéáäßêôőï ôțńá;"
+msgid "Bringing up the network"
+msgstr "Ćêêßíçóç äéêôęïő"
-#: ../../network/tools.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Internet configuration"
-msgstr "Ńőèìßóćéò Äéáäéêôęïő"
+msgid "Screenshots will be available after install in %s"
+msgstr "Ôá óôéăìéüôőđá èá ćßíáé äéáèĘóéìá ìćôÜ ôçí ćăêáôÜóôáóçò óôï %s"
-#: ../../partition_table/raw.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
msgstr ""
-"ÊÜôé êáêü óőìâáßíćé óôï äßóêï óáò. \n"
-"žíá ôćóô ćëĘăśïő ôçò áêćńáéüôçôáò ôùí äćäïìĘíùí áđĘôőść. \n"
-"Áőôü óçìáßíćé đùò ç ïđïéáäȚđïôć ćăăńáöȚ óôï äßóêï èá êáôáëȚîćé óáí ôőśáßá "
-"óêïőđßäéá."
+"Đćńéóóüôćńćò ôùí ìßá êáôáôìȚóćéò Windows âńĘèçêáí óôïí äßóêï óáò. Đáńáêáëț \n"
+"ćđéëĘîôć đïéá èĘëćôć íá óőńńéêíțóćôć ăéá íá ćăêáôáóôȚóćôć ôï Mandrake "
+"Linux.\n"
+"\n"
+"ÊÜèć êáôÜôìçóç áíáöĘńćôáé ùò: \"Œíïìá Linux\", \"Œíïìá Windows\"\n"
+"\"Śùńçôéêüôçôá\".\n"
+"\n"
+"Ôï üíïìá Linux óçìáßíćé ôá ćîȚò: \"Ôęđïò äßóêïő\",\"áńéèìüò äßóêïő\",\n"
+"\"áńéèìüò êáôÜôìçóçò ăéá đáńÜäćéăìá, \"hda1\").\n"
+"\n"
+"Ï \"Ôęđïò äßóêïő\" ćßíáé \"hd\" ćÜí đńüêćéôáé ăéá äßóêï IDE êáé \"sd\" \n"
+"ăéá SCSI äßóêï.\n"
+"\n"
+"Ï \" áńéèìüò äßóêïő\"ćßíáé đÜíôá Ęíá ăńÜììá ìćôÜ ôï \"hd\" Ț \"sd\". Ăéá\n"
+"ôïőò IDE äßóêïőò: \n"
+"\n"
+" * \"a\" ćßíáé ï \"master äßóêïò óôïí đńțôï ćëćăêôȚ IDE\",\n"
+"\n"
+" * \"b\" ćßíáé ï \"slave äßóêïò óôïí đńțôï ćëćăêôȚ IDE\",\n"
+"\n"
+" * \"c\" ćßíáé ï \"master äßóêïò óôïí äćęôćńï ćëćăêôȚ IDE\",\n"
+"\n"
+" * \"d\" ćßíáé ï \"slave äßóêïò óôïí äćęôćńï ćëćăêôȚ IDE\".\n"
+"\n"
+"Ăéá äßóêïőò SCSI, \"a\" ćßíáé ï đńțôïò äßóêïò, \"b\" ćßíáé ï äćęôćńïò "
+"äßóêïò\n"
+" êëđ...\n"
+"\n"
+"Ôï \"Œíïìá Windows\" ćßíáé ôï ăńÜììá ôçò êáôÜôìçóçò üđùò öáßíćôáé áđü ôá\n"
+"Windows (ï đńțôïò äßóêïò Ț êáôÜôìçóç ëĘăćôáé \"C:\")."
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid " (Default)"
-msgstr " (ĐńïćđéëćăìĘíïò)"
+msgid "Tanzania"
+msgstr "Ôáíæáíßá"
-#: ../../printer/cups.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Óôïí ćîőđçńćôçôȚ CUPS \"%s\""
+msgid "Computing FAT filesystem bounds"
+msgstr "Őđïëïăéóìüò FAT filesystem bounds"
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Remote Printers"
-msgstr "ÁđïìáêńőóìĘíïé ćêôőđùôĘò"
+msgid ""
+"\n"
+"Backup Sources: \n"
+msgstr ""
+"\n"
+"- ĐçăĘò ÁíôéăńÜöùí Áóöáëćßáò:\n"
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "CUPS"
-msgstr "CUPS"
+msgid "Content of the file"
+msgstr "Đćńéćśüìćíï ôïő áńśćßïő"
-#: ../../printer/cups.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "(on this machine)"
-msgstr "(óć áőôü ôï ìçśÜíçìá)"
+msgid "Authentication LDAP"
+msgstr "Đéóôïđïßçóç LDAP"
-#: ../../printer/cups.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "(on %s)"
-msgstr "(óôïí %s)"
+msgid "Let me pick any driver"
+msgstr "Èá äéáëĘîù ćăț ïäçăü"
-#: ../../printer/data.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
+msgid "Profile "
+msgstr "Đńïößë "
-#: ../../printer/data.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "LPRng"
-msgstr "LPRng"
+msgid "transmitted"
+msgstr "áđćóôáëìĘíá"
-#: ../../printer/data.pm:1
-#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Palestine"
+msgstr "ÔìȚìá Splash"
-#: ../../printer/data.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LPD"
-msgstr "LPD"
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
-#: ../../printer/data.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
+msgid "%d comma separated strings"
+msgstr ""
-#: ../../printer/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "PDQ"
-msgstr "PDQ"
+msgid "Here is the full list of keyboards available"
+msgstr "ÁőôȚ ćßíáé ç đëȚńçò ëßóôá ôùí äéáèĘóéìùí đëçêôńïëïăßùí"
-#: ../../printer/data.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
+msgid "Theme name"
+msgstr "Œíïìá èĘìáôïò"
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Unknown Model"
-msgstr "¶ăíùóôï ÌïíôĘëï"
+msgid "/_Help"
+msgstr "/_ÂïȚèćéá"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Unknown model"
-msgstr "¶ăíùóôï ìïíôĘëï"
+msgid ""
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
+"Ćäț ìđïńćßôć íá ćđéëĘîćôć áí ïé óőíäćìĘíïé óáńùôĘò áőôïę ôï ìçśáíȚìáôïò èá "
+"ćßíáé đńïóâÜóéìïé áđü áđïìáêńőóìĘíá ìçśáíȚìáôá êáé áđü đïéá."
-#: ../../printer/main.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "%s (Port %s)"
-msgstr "%s (Èęńá %s)"
+msgid "the width of the progress bar"
+msgstr "ôï đëÜôïò ôçò ăńáììȚò đńïüäïő"
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Host %s"
-msgstr "Œíïìá óőóôȚìáôïò"
+#: ../../lang.pm:1
+#, c-format
+msgid "Cook Islands"
+msgstr "ÍȚóïé Êïőê"
-#: ../../printer/main.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Network %s"
-msgstr "Äßêôőï %s"
+msgid "Formatting partition %s"
+msgstr "Ìïńöïđïßçóç êáôÜôìçóçò %s"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Interface \"%s\""
-msgstr "ÄéćđáöȚ \"%s\""
+msgid "Hostname required"
+msgstr "áđáéôćßôáé ôï äéêôőáêü üíïìá"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Local network(s)"
-msgstr "Ôïđéêü Äßêôőï(á)"
+msgid "Unselect fonts installed"
+msgstr "Ïé áđïćđéëćăìĘíćò ăńáììáôïóćéńĘò ćăêáôáóôÜèçêáí"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Raw printer (No driver)"
-msgstr "ÁêáôĘńăáóôïò ćêôőđùôȚò (Śùńßò ïäçăü)"
+msgid "Cancel"
+msgstr "¶êőńï"
-#: ../../printer/main.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ", using command %s"
-msgstr ", ìć ôçí ćíôïëȚ %s"
+msgid "Searching for configured scanners ..."
+msgstr "Ăßíćôáé áíáæȚôçóç ăéá ńőèìéóìĘíïőò óáńùôĘò ..."
-#: ../../printer/main.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr "óôïí ćîőđçńćôçôȚ Novell \"%s\", óôïí ćêôőđùôȚ \"%s\""
+msgid "Wheel"
+msgstr "Ìć ńïäÜêé"
-#: ../../printer/main.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr "óôïí ćîőđçńćôçôȚ SMB/Windows \"%s\", êïéíüśńçóôï \"%s\""
+msgid "Videocard"
+msgstr "ÊÜńôá ïèüíçò"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP host \"%s\", èęńá %s"
+msgid "\tBackups use tar and bzip2\n"
+msgstr "\tÁíôßăńáöá Áóöáëćßáò ùò tar êáé bzip2\n"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr "óôïí ćîőđçńćôçôȚ LPD \"%s\", óôïí ćêôőđùôȚ \"%s\""
+msgid "Remove Selected"
+msgstr "Áöáßńćóç ĆđéëćăìĘíùí"
-#: ../../printer/main.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ", printing to %s"
-msgstr ", ćêôęđùóç óôï %s"
+msgid "/Autodetect _modems"
+msgstr "/Ćíôïđéóìüò _ìüíôćì"
-#: ../../printer/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ", multi-function device"
-msgstr ", đïëőśńçóôéêȚ óőóêćőȚ"
+msgid "Remove printer"
+msgstr "Áöáßńćóç ćêôőđùôȚ"
-#: ../../printer/main.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", đïëőśńçóôéêȚ óőóêćőȚ óôï HP JetDirect"
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
+msgstr ""
+"ĐŃÏÓÏŚÇ!\n"
+"\n"
+"Ôï DrakX đńĘđćé ôțńá íá áëëÜîćé ôï ìĘăćèïò ôçò êáôÜôìçóçò ôùí Windows.\n"
+"Ç äéáäéêáóßá áőôȚ ćìđćńéĘśćé êéíäęíïőò. ĆÜí äćí ôï Ęśćôć êÜíćé Țäç,\n"
+"âăćßôć áđü ôçí ćăêáôÜóôáóç ćëĘăîćôć ôçí êáôÜôìçóç ìć ôï \n"
+"scandisk ìĘóá áđü ôá Windows êáé êáôÜ đćńßđôùóç ôçí áđïêáôáêćńìÜôéóç \n"
+"(defragment). ÌćôÜ îćêéíȚóôć îáíÜ ôçí ćăêáôÜóôáóç.\n"
+"ÌćôÜ èá đńĘđćé íá êńáôȚóćôć áíôßăńáöï áóöáëćßáò ôùí äćäïìĘíùí óáò.\n"
+"ĆÜí ćßóôć óßăïőńïé, đáôȚóôć ĆíôÜîćé."
-#: ../../printer/main.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ", multi-function device on USB"
-msgstr ", đïëőśńçóôéêȚ óőóêćőȚ óôçí USB"
+msgid "Which services would you like to allow the Internet to connect to?"
+msgstr "Đïéćò őđçńćóßćò èĘëćôć íá ćđéôńĘđïíôáé íá óőíäĘïíôáé óôï Äéáäßêôőï;"
-#: ../../printer/main.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ", multi-function device on parallel port \\#%s"
-msgstr ", đïëőśńçóôéêȚ óőóêćőȚ óôçí đáńÜëëçëç èȚńá \\#%s"
+msgid ""
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
+msgstr ""
+"Êáëțò ïńßóáôć óôï ćńăáëćßï ńęèìéóçò ôáśőäńïìćßïő.\n"
+"\n"
+"Ćäț, èá ìđïńĘóćôć íá ńőèìßóćôć ôï óęóôçìá ćéäïđïßçóçò\n"
-#: ../../printer/main.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid ", USB printer"
-msgstr ", ćêôőđùôȚò USB"
+msgid "Other"
+msgstr "¶ëëï"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
-msgid ", USB printer \\#%s"
-msgstr ", ćêôőđùôȚò USB \\#%s"
+msgid "Default"
+msgstr "ĐńïćđéëćăìĘíï"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid " on parallel port \\#%s"
-msgstr " óôç đáńÜëëçëç èȚńá \\#%s"
+msgid "Button 2 Emulation"
+msgstr "Đńïóïìïßùóç 2 Êïőìđéțí"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Local Printers"
-msgstr "Ôïđéêïß ćêôőđùôĘò"
+msgid "type1inst building"
+msgstr "äçìéïőńăßá type1inst"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Pipe job into a command"
-msgstr "ÄéáóùëȚíùóç ćńăáóßáò óć ćíôïëȚ"
+msgid "Abiword"
+msgstr "Abiword"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Enter a printer device URI"
-msgstr "ĆéóÜăćôć óőóêćőȚ ćêôőđùôȚ URI"
+msgid "choose image file"
+msgstr "ĆđéëĘîôć ìéá ćéêüíá"
-#: ../../printer/main.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Printer on NetWare server"
-msgstr "ĆêôőđùôȚ óć ćîőđçńćôçôȚ NetWare"
+msgid "X server"
+msgstr "ćîőđçńćôçôȚò X"
-#: ../../printer/main.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "ĆêôőđùôȚò óć ćîőđçńćôçôȚ SMB/Windows 95/98/NT"
+msgid "Domain Admin User Name"
+msgstr "Œíïìá ŚńȚóôç ÄéáśćéńéóôȚ ÔïìĘá"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "ĆêôőđùôȚò äéêôęïő (TCP/Socket)"
+msgid "There was an error while scanning for TV channels"
+msgstr "ĐńïêëȚèçêć óöÜëìá êáôÜ ôçí áíáæȚôçóç óôáèìțí ôçëćüńáóçò"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Printer on remote lpd server"
-msgstr "ÁđïìáêńőóìĘíïò ćêôőđùôȚò óć ćîőđçńćôçôȚ lpd"
+msgid "US keyboard (international)"
+msgstr "US äéćèíĘò"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "ÁđïìáêńőóìĘíïò ćêôőđùôȚò óć ćîőđçńćôçôȚ CUPS"
+msgid "Not installed"
+msgstr "Ìç ćăêáôćóôçìĘíï"
-#: ../../printer/main.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Remote printer"
-msgstr "ÁđïìáêńőóìĘíïò ćêôőđùôȚò"
+msgid "LAN connection"
+msgstr "Óęíäćóç LAN"
-#: ../../printer/main.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Local printer"
-msgstr "Ôïđéêüò ćêôőđùôȚò"
+msgid "/File/-"
+msgstr "/Áńśćßï/-"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configuring applications..."
-msgstr "Ńęèìéóç ćöáńìïățí..."
+msgid "Italian"
+msgstr "Éôáëéêü"
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
+msgid "Basic"
+msgstr "ÂáóéêȚ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Ăßíćôáé áöáßńćóç ôïő ćêôőđùôȚ \"%s\"..."
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
+msgstr ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Ćßóôć âĘâáéïé ăéá ôçí áöáßńćóç ôïő ćêôőđùôȚ \"%s\";"
+msgid "Honduras"
+msgstr "Ïíäïęńá"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Remove printer"
-msgstr "Áöáßńćóç ćêôőđùôȚ"
+msgid "pdq"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Learn how to use this printer"
-msgstr "ÌÜèćôć đùò íá śćéńéóèćßôć áőôüí ôïí ćêôőđùôȚ"
+msgid "Card IO"
+msgstr "IO êÜńôáò"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Print test pages"
-msgstr "Ćêôęđùóç äïêéìáóôéêțí óćëßäùí"
+msgid "when checked, owner and group won't be changed"
+msgstr "üôáí ćđéëćăćß, ï éäéïêôȚôçò êáé ïìÜäá äćí èá áëëÜîïőí"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
msgstr ""
-"ÁđĘôőść ç áöáßńćóç ôïő ćêôőđùôȚ \"%s\" áđü ôï Star Office/OpenOffice.org/GIMP"
+"\n"
+"ÁőôȚ ćßíáé ćéäéêȚ Bootstrap\n"
+"êáôÜôìçóç ăéá\n"
+"dual-booting ôï óęóôçìÜ óáò.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
msgstr ""
-"Ï ćêôőđùôȚò \"%s\" áöáéńĘèçêć ìć ćđéôőśßá áđü ôï Star Office/OpenOffice.org/"
-"GIMP"
+"Đáńáêáëț êáèïńßóôć ćÜí ăéá êÜèć âȚìá èá ăßíćé ćđáíÜëçűç ôçò ćăêáôÜóôáóçò, Ț "
+"ćÜí ăßíćé śćéńïêßíçôá"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Ăßíćôáé áöáßńćóç ôïő ćêôőđùôȚ áđü ôï Star Office/OpenOffice.org/GIMP"
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
+msgstr ""
+"Ćđßóçò ćäț ìđïńćßôć íá ïńßóćôć áí óáńùôĘò đïő âńßóêïíôáé óć áđïìáêńőóìĘíá "
+"ìçśáíȚìáôá èá ćßíáé äéáèĘóéìá óć áőôü ôï ìçśÜíçìá."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Áöáßńćóç áőôïę ôïő ćêôőđùôȚ áđü ôï Star Office/OpenOffice.org/GIMP"
+msgid "\t-Network by FTP.\n"
+msgstr "\t-Äßêôőï ìĘóù FTP.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-"ÁđĘôőść ç đńïóèȚêç ôïő ćêôőđùôȚ \"%s\" óôï Star Office/OpenOffice.org/GIMP"
+msgid "Russian (Yawerty)"
+msgstr "Ńùóéêü (Yawerty)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-"Ï ćêôőđùôȚò \"%s\" đńïóôĘèçêć ìć ćđéôőśßá óôï Star Office/OpenOffice.org/GIMP"
+msgid "You must enter a device or file name!"
+msgstr "ĐńĘđćé íá ïńßóćôć ìéá óőóêćőȚ Ț Ęíá üíïìá áńśćßïő!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Ăßíćôáé đńïóèȚêç ôïő ćêôőđùôȚ óôï Star Office/OpenOffice.org/GIMP"
+msgid "/_Quit"
+msgstr "/_žîïäïò"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr "ĐńïóèȚêç áőôïę ôïő ćêôőđùôȚ óôï Star Office/OpenOffice.org/GIMP"
+msgid ""
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Ï ćêôőđùôȚò \"%s\" ćßíáé đëĘïí ï đńïćđéëćăìĘíïò ćêôőđùôȚò."
+msgid "Graphics memory: %s kB\n"
+msgstr "ÌíȚìç êÜńôáò ăńáöéêțí: %s kB\n"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Default printer"
-msgstr "ĐńïćđéëćăìĘíïò ćêôőđùôȚò"
+#: ../../standalone.pm:1
+#, fuzzy, c-format
+msgid ""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+msgstr ""
+"\n"
+" ĂćíéêÜ ¶äćéá\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" ĂćíéêÜ ¶äćéá\n"
+"\n"
+" ëçöèĘíôá ĂćíéêÜ ¶äćéá\n"
+"\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Set this printer as the default"
-msgstr "Ïńéóìüò áőôïę ôïő ćêôőđùôȚ ùò đńïćđéëćăìĘíïő"
+msgid "access to compilation tools"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printer options"
-msgstr "ĆđéëïăĘò ćêôőđùôȚ"
+msgid "Please select data to restore..."
+msgstr "Đáńáêáëț ćđéëĘîôć ôá äćäïìĘíá đńïò ćđáíáöïńÜ..."
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Printer manufacturer, model"
-msgstr "ÊáôáóêćőáóôȚ ćêôőđùôȚ, ìïíôĘëï"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
+msgstr ""
+"ĆÜí óêïđćęćôć íá śńçóéìïđïéȚóćôć ôï aboot, đńïóĘîôć íá áöȚóćôć ćëćęèćńï śțńï "
+"(2048 ôïìćßò ćßíáé áńêćôïß)\n"
+"óôçí áńśȚ ôïő äßóêïő"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "ÊáôáóêćőáóôȚ ćêôőđùôȚ, ìïíôĘëï, ïäçăü"
+msgid "Standard test page"
+msgstr "ÔőđéêȚ äïêéìáóôéêȚ óćëßäá"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Áöáßńćóç đáëáéïę ćêôőđùôȚ \"%s\"..."
+msgid "Create"
+msgstr "Äçìéïőńăßá"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printer name, description, location"
-msgstr "Œíïìá ćêôőđùôȚ, đćńéăńáöȚ, èĘóç"
+msgid "What"
+msgstr "Ôé"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer connection type"
-msgstr "Ôęđï óęíäćóç ćêôőđùôȚ"
+msgid "There was an error ordering packages:"
+msgstr "ĐńïêëȚèçêć óöÜëìá êáôÜ ôçí ôáîéíüìçóç ôùí đáêĘôùí:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Raw printer"
-msgstr "ÁêáôĘńăáóôïò ćêôőđùôȚò"
+msgid "Bulgarian (BDS)"
+msgstr "Âïőëăáńéêü (BDS)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Do it!"
-msgstr "Êáí' ôï!"
+msgid "Disable Server"
+msgstr "Áđćíćńăïđïßçóç ĆîőđçńćôçôȚ"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Close"
-msgstr "Êëćßóéìï"
+msgid "Filesystem encryption key"
+msgstr "Êëćéäß êńőđôïăńÜöçóçò óőóôȚìáôïò áńśćßùí"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
+msgid "Gujarati"
+msgstr "Ăêïőôæáńáôéêü"
+
+#: ../../interactive/stdio.pm:1
+#, fuzzy, c-format
msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
msgstr ""
-"ĆêôőđùôȚò %s\n"
-"Ôé èĘëćôć íá áëëÜîćôć óć áőôüí ôïí ćêôőđùôȚ;"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Modify printer configuration"
-msgstr "ÁëëáăȚ ńőèìßóćùí ćêôőđùôȚ"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Add a new printer"
-msgstr "ĐńïóèȚêç íĘïő ćêôőđùôȚ"
+"ćđćîćńăáóßá\n"
+"\n"
+" "
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Normal Mode"
-msgstr "ÊáíïíéêȚ ÊáôÜóôáóç"
+msgid "Save theme"
+msgstr "AđïèȚêćőóç èĘìáôïò"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Change the printing system"
-msgstr "ÁëëáăȚ óőóôȚìáôïò ćêôęđùóçò"
+msgid "group"
+msgstr "oìÜäá"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "CUPS configuration"
-msgstr "Ńęèìéóç CUPS"
+msgid "Brazil"
+msgstr "Âńáæéëßá"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"ÁíáíĘùóç ëßóôáò ćêôőđùôțí ( ăéá íá ćìöáíßóćé üëïőò ôïőò äéáèĘóéìïőò "
-"áđïìáêńőóìĘíïőò ćêôőđùôĘò)"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Display all available remote CUPS printers"
-msgstr ""
-"ÁíáíĘùóç ëßóôáò ćêôőđùôțí ( ăéá íá ćìöáíßóćé üëïőò ôïőò äéáèĘóéìïőò "
-"áđïìáêńőóìĘíïőò ćêôőđùôĘò)"
+msgid "Auto Install"
+msgstr "Áőôüìáôç ćăêáôÜóôáóç"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Oé đáńáêÜôù ćêôőđùôĘò Ęśïőí ńőèìéóôćß. ÊÜíôć äéđëü êëéê óć Ęíáí ćêôőđùôȚ ăéá "
-"íá áëëÜîćôć ôéò ńőèìßóćéò ôïő, íá ôïí ïńßóćôć ùò đńïćđéëćăìĘíï Ț ăéá íá "
-"đńïâÜëćôć đëçńïöïńßćò ăéá áőôüí."
+msgid "Network Configuration Wizard"
+msgstr "Ïäçăüò Ńęèìéóçò Äéêôęïő"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printing system: "
-msgstr "Óęóôçìá ćêôęđùóçò: "
+msgid "Removable media automounting"
+msgstr "Áőôüìáôç óęíäćóç áđïóđțìćíùí ìïíÜäùí"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Checking installed software..."
-msgstr "'žëćăśïò ćăêáôćóôçìĘíùí đńïăńáììÜôùí..."
+msgid "Printing"
+msgstr "Ćêôęđùóç"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Installing Foomatic..."
-msgstr "ĆăêáôÜóôáóç Foomatic..."
+msgid "Unkown driver"
+msgstr "¶ăíùóôïò ïäçăüò"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "ÁđĘôőść ç ńęèìéóç ôïő ćêôőđùôȚ \"%s\"!"
+msgid ""
+"There are no printers found which are directly connected to your machine"
+msgstr "Äćí âńĘèçêáí ćêôőđùôĘò đïő íá ćßíáé óőíäćìĘíïé óôïí őđïëïăéóôȚ óáò"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Ńęèìéóç ćêôőđùôȚ \"%s\"..."
+msgid "Create a new partition"
+msgstr "Äçìéïőńăßá íĘáò êáôÜôìçóçò"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Reading printer data..."
-msgstr "ÁíÜăíùóç äćäïìĘíùí ćêôőđùôȚ..."
+msgid "Driver:"
+msgstr "Ïäçăüò:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Đïéï óęóôçìá ćêôęđùóçò èĘëćôć íá śńçóéìïđïéȚóćôć;"
+msgid "unknown"
+msgstr "¶ăíùóôï"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Select Printer Spooler"
-msgstr "ĆđéëïăȚ Spooler ĆêôőđùôȚ"
+msgid "Use fdisk"
+msgstr "ŚńȚóç fdisk"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Setting Default Printer..."
-msgstr "Ïńéóìüò ĐńïćđéëćăìĘíïő ĆêôőđùôȚ..."
+msgid "MOVE YOUR WHEEL!"
+msgstr "ÊÉÍÇÓÔĆ ÔÏ ŃÏÄÁÊÉ!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Installing %s ..."
-msgstr "ĆăêáôÜóôáóç %s ..."
+msgid "sent: "
+msgstr "áđïóôïëȚ: "
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Removing %s ..."
-msgstr "Áöáéńćßôáé ï %s..."
+msgid "Automatic IP"
+msgstr "Áőôüìáôï IP"
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
+"The \"%s\" button shows two more buttons to:\n"
"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Ôï óęóôçìá ćêôęđùóçò (%s) äćí èá îćêéíÜ áőôüìáôá êáôÜ ôçí ćêêßíçóç ôïő "
-"ìçśáíȚìáôïò\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
"\n"
-"ŐđÜńśćé ç đéèáíüôçôá íá Ęśćé áđćíćńăïđïéçèćß ç áőôüìáôç ćêêßíçóç ìć ôçí "
-"áëëáăȚ óć őűçëüôćńï ćđßđćäï áóöáëćßáò, ćđćéäȚ ôï óęóôçìá ćêôęđùóçò ćßíáé Ęíá "
-"ćí äőíÜìćé óçìćßï ćđßèćóçò\n"
+" Note that two different options are available after clicking the button:\n"
"\n"
-"ÈĘëćôć íá îáíáćíćńăïđïéçèćß ç áőôüìáôç ćêêßíçóç ôïő óőóôȚìáôïò ćêôęđùóçò;"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Ćêêßíçóç ôïő óőóôȚìáôïò ćêôęđùóçò êáôÜ ôçí ćêêßíçóç"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
"\n"
-"Do you really want to configure printing on this machine?"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
msgstr ""
-"Đńüêćéôáé íá ćăêáôáóôȚóćôć ôï óęóôçìá ćêôęđùóçò %s óć Ęíá óęóôçìá đïő Ęśćé "
-"ćđßđćäï áóöáëćßáò %s\n"
+"Linux\n"
+" Ćđüìćíï\n"
"\n"
-"Áőôü ôï óęóôçìá ćêôęđùóçò ćêôćëćß Ęíáí äáßìïíá (äéćńăáóßá óôï öüíôï) đïő "
-"đćńéìĘíćé ôéò ćńăáóßćò ćêôęđùóçò êáé ôéò äéáśćéńßæćôáé. Áőôüò ï äáßìïíáò "
-"ćßíáé ćđßóçò đńïóâÜóéìïò áđü Ęíá áđïìáêńőóìĘíï ìçśÜíçìá áđü ôï äßêôőï êáé "
-"ćđßóçò ćßíáé Ęíá ćí äőíÜìćé óçìćßï ćđßèćóçò. Ăéá áőôü Ęíáò đćńéïńéóìĘíïò "
-"áńéèìüò äáéìüíùí îćêéíÜ ćî ïńéóìïę óć áőôü ôï ćđßđćäï áóöáëćßáò.\n"
"\n"
-"Ćßóôć âĘâáéïé üôé èĘëćôć íá ńőèìßóćôć ôçí ćêôęđùóç óć áőôü ôï ìçśÜíçìá;"
+"\n"
+"\n"
+" Ăéá ĐńïśùńçìĘíïőò\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" Ćđáíáöüńôùóç\n"
+"\n"
+"\n"
+" Áőôüìáôï\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" ÁđïèȚêćőóç\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" Linux\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "ĆăêáôÜóôáóç óőóôȚìáôïò ćêôęđùóçò óôï ćđßđćäï áóöÜëćéáò %s"
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "paranoid"
-msgstr "Đáńáíïúêü"
+msgid "Configuration of a remote printer"
+msgstr "Ńęèìéóç áđïìáêńőóìĘíïő ćêôőđùôȚ"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "high"
-msgstr "Őűçëü"
+msgid "Moldova"
+msgstr "Ìïëäáâßá"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restarting printing system..."
-msgstr "Ćđáíćêêßíçóç ôïő óőóôȚìáôïò ćêôęđùóçò..."
+msgid "Please check if you want to erase your tape before the backup."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Configuration of a remote printer"
-msgstr "Ńęèìéóç áđïìáêńőóìĘíïő ćêôőđùôȚ"
+msgid "An online platform to respond to enterprise support needs."
+msgstr ""
+
+#: ../../network/network.pm:1
+#, c-format
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "Ôï URL đńĘđćé íá îćêéíÜ ìć 'http:' Ț 'ftp:'"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Add a new rule at the end"
+msgstr "ĐńïóèȚêç íĘïő êáíüíá óôï ôĘëïò"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
msgstr ""
-"Ç đńüóâáóç äéêôęïő äćí ćêôćëćßôï êáé äćí ìđüńćóć íá ćêêéíçèćß. Đáńáêáëț "
-"ćëĘăîôć ôçí ńęèìéóç ôïő őëéêïę óáò. ÌćôÜ đńïóđáèȚóôć íá ńőèìßóćôć ôïí "
-"áđïìáêńőóìĘíï ćêôőđùôȚ óáò."
+"Ćđßóçò ćäț ìđïńćßôć íá ïńßóćôć áí ïé ćêôőđùôĘò đïő âńßóêïíôáé óć "
+"áđïìáêńőóìĘíá ìçśáíȚìáôá èá ćßíáé áőôüìáôá äéáèĘóéìïé êáé óć áőôü ôï "
+"ìçśÜíçìá."
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
msgstr ""
-"Ç ńęèìéóç äéêôęïő đïő Ęăéíć êáôÜ ôç äéÜńêćéá ôçò ćăêáôÜóôáóçò äćí Țôáí "
-"äőíáôüí íá ćêêéíçèćß. Đáńáêáëț ćëĘăîôć ćÜí ôï äßêôőï ćßíáé đńïóâÜóéìï ìćôÜ "
-"ôçí ćêêßíçóç êáé äéïńèțóôć ôéò ńőèìßóćéò ìć ôçí śńȚóç ôïő ÊĘíôńïő ĆëĘăśïő "
-"ôçò Mandrake, óôï ôìȚìá \"Äßêôőï & Äéáäßêôőï\" / \"Óęíäćóç\" êáé ìćôÜ "
-"ńőèìßóôć ôïí ćêôőđùôȚ ćđßóçò ìć ôï ÊĘíôńï ĆëĘăśïő Mandrake óôï ôìȚìá \"Őëéêü"
-"\"/\"ĆêôőđùôȚò\""
+"Ìđïńćßôć ôțńá íá äțóćôć ôéò đáńáìĘôńïőò ăéá ôï Üńèńùìá %s.\n"
+"Ïé đáńÜìćôńïé Ęśïőí ôçí ìïńöȚ ``üíïìá=ôéìȚ üíïìá2=ôéìȚ2 ...''.\n"
+"Ăéá đáńÜäćéăìá, ``io=0x300 irq=7''"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configure the network now"
-msgstr "Ńęèìéóç äéêôęïő ôțńá"
+msgid "Quit without writing the partition table?"
+msgstr "žîïäïò śùńßò áđïèȚêćőóç ôïő đßíáêá êáôáôìȚóćùí;"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Go on without configuring the network"
-msgstr "ÓőíĘśéóç śùńßò ôçí ńęèìéóç ôïő äéêôęïő"
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Èá ńőèìßóćôć Ęíáí áđïìáêńőóìĘíï ćêôőđùôȚ. Áőôü áđáéôćß Ęíá đńïóâÜóéìï "
-"äßêôőï, áëëÜ ôï äßêôőï äćí Ęśćé ńőèìéóôćß áêüìá. Áí óőíćśßóćôć śùńßò íá "
-"ńőèìßóćôć ôï äßêôőï äćí èá ìđïńĘóćôć íá êÜíćôć śńȚóç ôïő ćêôőđùôȚ đïő "
-"ńőèìßæćôć. Ôé èĘëćôć íá êÜíćôć;"
+msgid "Installing packages..."
+msgstr "ĆăêáôÜóôáóç đáêĘôùí..."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Network functionality not configured"
-msgstr "Ç ëćéôïőńăéêüôçôá ôïő äéêôęïő äćí ńőèìßóôçêć"
+msgid "Dutch"
+msgstr "Ïëëáíäéêü"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Starting network..."
-msgstr "Ćêêßíçóç äéêôęïő..."
+msgid "The following packages need to be installed:\n"
+msgstr "Ôá đáńáêÜôù đáêĘôá đńĘđćé íá ćăêáôáóôáèïęí:\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Refreshing printer data..."
-msgstr "ÁíáíĘùóç äćäïìĘíùí ćêôőđùôȚ..."
+msgid "Angola"
+msgstr "Áăêüëá"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"'žśćôć ìćôáöĘńćé ôïí đńțçí đńïćđéëćăìĘíï ćêôőđùôȚò óáò (\"%s\"), Íá ćßíáé ï "
-"đńïćđéëćăìĘíïò ćêôőđùôȚò êáé óôï íĘï íĘï óęóôçìá ćêôęđùóçò %s;"
+msgid "service setting"
+msgstr "Ńőèìßóćéò őđçńćóßáò"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Transfer printer configuration"
-msgstr "ÌćôáöïńÜ ńőèìßóćùí ćêôőđùôȚ"
+msgid "Custom"
+msgstr "ĐńïóáńìïóìĘíï"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Transferring %s..."
-msgstr "ÌćôáöĘńćôáé ï %s..."
+msgid "File is already used by another loopback, choose another one"
+msgstr "Ôï áńśćßï śńçóéìïđïéćßôáé Țäç áđü Üëëï loopback, ćđéëĘîôć Ęíá Üëëï"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "New printer name"
-msgstr "ÊáíĘíá üíïìá ćêôőđùôȚ"
+msgid "Read-only"
+msgstr "Ìüíï ăéá áíÜăíùóç"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Ï ćêôőđùôȚò \"%s\" őđÜńśćé Țäç,\n"
-"Ćßóôć âĘâáéïé ăéá ôçí ćđéêÜëőűç ôùí ńőèìßóćùí;"
+msgid "Latvia"
+msgstr "Ëćôôïíßá"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Ôï üíïìá ôïő ćêôőđùôȚ đńĘđćé íá đćńéĘśćé ìüíï ăńÜììáôá, áńéèìïęò êáé ôïí "
-"śáńáêôȚńá underscore"
+msgid "No known driver"
+msgstr "ÊáíĘíáò ăíùóôüò ïäçăüò"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Transfer"
-msgstr "ÌćôáöïńÜ"
+msgid "1 MB"
+msgstr "1 MB"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
msgstr ""
-"žíáò ćêôőđùôȚò ìć ôï üíïìá \"%s\" őđÜńśćé Țäç óôï %s\n"
-"ÊÜíôć êëéê óôï \"ÌćôáöïńÜ\" ăéá íá ôïí ćđéêáëęűćôć.\n"
-"Ćđßóçò ìđïńćßôć íá ôïő äțóćôć Ęíá íĘï üíïìá Ț íá ôïí đáńáâëĘűćôć ."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Do not transfer printers"
-msgstr "Śùńßò ìćôáöïńÜ ćêôőđùôțí"
+"Áí äćí ćßíáé áőôüò đïő èĘëćôć íá ńőèìßóćôć, ćéóÜăćôć ôï üíïìá óőóêćőȚò/üíïìá "
+"áńśćßïő óôç ăńáììȚ ćéóáăùăȚò"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksound:1
#, c-format
msgid ""
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
"\n"
-"ĆđéëĘîôć ôïőò ćêôőđùôĘò đïő èĘëćôć íá ìćôáöĘńćôć êáé êÜíôć\n"
-"êëéê óôï \"ÌćôáöïńÜ\"."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
+"You can visit our hardware database at:\n"
"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
+"Äćí âńĘèçêć óőóêćőȚ ÊÜńôáò 'čśïő óôï ìçśÜíçìÜ óáò. Đáńáêáëț âćâáéùèćßôć üôé "
+"ç őđïóôçńéæüìćíç ÊÜńôá čśïő óáò ćßíáé óùóôÜ ôïđïèćôçìĘíç.\n"
"\n"
-"Ćđßóçò ćêôőđùôĘò đïő Ęśïőí ńőèìéóôćß ìć áńśćßá PPD đïő đáńĘśïíôáé áđü ôïőò "
-"êáôáóêćőáóôĘò ôïőò Ț ìć ôïđéêïęò ïäçăïęò CUPS äćí ìđïńïęí íá ìćôáöćńèïęí."
+"\n"
+"Ìđïńćßôć íá ćđéóêćöôćßôć ôç âÜóç äćäïìĘíùí őëéêïę óôï:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Ćđßóçò ćńăáóßćò đïő äćí äçìéïőńăȚèçêáí ìć áőôü ôï đńüăńáììá Ț ôï \"foomatic-"
-"configure\" äćí ìđïńïęí íá ìćôáöćńèïęí."
+msgid "Configure Local Area Network..."
+msgstr "Ńęèìéóç ôïđéêïę äéêôęïő..."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "Ôï LPD êáé ôï LPRng äćí őđïóôçńßæïőí ćêôőđùôĘò IPP.\n"
+msgid "Launch the sound system on your machine"
+msgstr "Ćêêßíçóç ôïő óőóôȚìáôïò Țśïő óôï ìçśÜíçìÜ óáò"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"Ôï PDQ őđïóôçńßæćé ìüíï ôïđéêïęò ćêôőđùôĘò, ÁđïìáêńőóìĘíïò ćêôőđùôĘò LPD êáé "
-"ćêôőđùôĘò Sockete/TCP.\n"
+msgid "Preparing printer database..."
+msgstr "ÁíÜăíùóç âÜóçò äćäïìĘíùí ćêôőđùôțí..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
+msgid "Information"
+msgstr "Đëçńïöïńßćò"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr "Ïëïêëçńțèçêć Œëá ćî' ïńéóìïę\n"
+#: ../../network/drakfirewall.pm:1
+#, c-format
+msgid "No network card"
+msgstr "äćí âńĘèçêć êÜńôá äéêôęïő"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-"Ï ćêôőđùôȚò ńőèìßóôçêć áőôüìáôá ăéá đńüóâáóç óôéò êÜńôćò áđïèȚêćőóçò "
-"öùôïăńáöéțí ôïő áđü ôïí őđïëïăéóôȚ óáò. Ìđïńćßôć íá Ęśćôć đńüóâáóç óć áőôĘò "
-"śńçóéìïđïéțíôáò ôï ăńáöéêü đńüăńáììá \"MtoolsFM\" (Ìćíïę: \"ĆöáńìïăĘò\" -> "
-"\"Ćńăáëćßá Áńśćßùí\" -> \"MTools File Manager\") Ț ôçí ćíôïëȚ \"mtools"
-"\" (ăéá đćńéóóüôćńćò đëçńïöïńßćò đëçêôńïëïăȚóôć \"man mtools\" óôç ăńáììȚ "
-"ćíôïëțí). Èá âńćßôć ôéò öùôïăńáößćò óáò óôïí äßóêï \"p:\", Ț óć äßóêïőò ìć "
-"ôá ćđüìćíá ăńÜììáôá áí Ęśćôć đćńéóóüôćńïőò áđü Ęíáí ćêôőđùôĘò HP ìć êÜńôćò "
-"áđïèȚêćőóçò öùôïăńáöéțí. Óć áőôȚí ôçí đćńßđôùóç, óôï đńüăńáììá \"MtoolsFM\" "
-"ìđïńćßôć íá ćđéëĘîćôć ìćôáîę ôùí äéáèĘóéìùí ăńáììÜôùí äßóêïő ìć ôï đćäßï "
-"óôçí Üíù äćîéÜ ăùíßá ôïő êáôáëüăïő áńśćßùí."
+msgid "Which filesystem do you want?"
+msgstr "Đïéï óęóôçìá áńśćßùí đńïôéìÜôć;"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "3 buttons"
+msgstr "Ôńéțí đëȚêôńùí"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Detailed information"
+msgstr "Ëćđôïìćńćßò đëçńïöïńßćò"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Malta"
+msgstr "ÌÜëôá"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
+"Printer default settings\n"
"\n"
-"Do not use \"scannerdrake\" for this device!"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
msgstr ""
-"óőóêćőȚ\n"
+"ĆêôőđùôȚò ćî' ïńéóìïę\n"
"\n"
-" Ïëïêëçńțèçêć óőóêćőȚ!"
+" Őűçëü."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Printing test page(s)..."
-msgstr "Ćêôęđùóç äïêéìáóôéêțí óćëßäùí..."
+msgid "This floppy is not FAT formatted"
+msgstr "ÁőôȚ ç äéóêĘôá äćí Ęśćé ìïńöïđïßçóç FAT"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Print option list"
-msgstr "Ćêôęđùóç ëßóôá ćđéëïățí"
+msgid "Configuring network"
+msgstr "Ńęèìéóç äéêôęïő"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Ćêôęđùóç óôïí ćêôőđùôȚ \"%s\""
+msgid "Graphic Card"
+msgstr "ÊÜńôá Ăńáöéêțí"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Ćêôęđùóç/Đńüóâáóç ÊÜńôáò Öùôïăńáöéțí óôï \"%s\""
+msgid "Resizing Windows partition"
+msgstr "Ăßíćôáé áëëáăȚ ôéò êáôÜôìçóçò ôùí Windows"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Ćêôęđùóç/ÓÜńùóç óôï \"%s\""
+msgid "Provider dns 1 (optional)"
+msgstr "dns 1 ĐáńïśĘá (đńïáéńćôéêü)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Ćêôęđùóç/ÓÜńùóç/ÊÜńôćò Öùôïăńáöéțí óôï\"%s\""
+msgid "Cameroon"
+msgstr "Êáìćńïęí"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../install_interactive.pm:1
+#, c-format
msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
msgstr ""
-"Ăéá íá ìÜèćôć đćńéóóüôćńá ăéá ôéò äéáèĘóéìćò ćíôïëĘò ăéá ôïí ôńĘśïí ćêôőđùôȚ "
-"äéáâÜóôć ôçí ëßóôá đïő öáßíćôć đáńáêÜôù Ț êÜíôć êëéê óôï \"Ćêôęđùóç ëßóôáò "
-"ćđéëïățí\"%s%s\n"
-"\n"
+"Ìđïńćßôć ôțńá íá êáôáôìȚóćôć ôïí äßóêï %s\n"
+"Œôáí ôćëćéțóćôć, ìçí îćśÜóćôć íá áđïèçêćęóćôć đáôțíôáò `w'"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-" Ćđßóçò ïé ćíôïëĘò \"%s\" êáé \"%s\" óáò ćđéôńĘđïőí íá ïńßóćôć ôéò ńőèìßóćéò "
-"ćđéëïățí ăéá ìéá óőăêćêńéìĘíç ćńăáóßá ćêôęđùóçò. ÁđëÜ đńïóèĘóôć ôéò "
-"ćđéèőìçôĘò ńőèìßóćéò áđü ôçí ăńáììȚ ćíôïëțí, đ.ś. \"%s <áńśćßï>\".\n"
+msgid "Close"
+msgstr "Êëćßóéìï"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
msgstr ""
-"\n"
-" ĆêôőđùôȚò"
+"\"Śțńá\": ćëĘăîôć ôçí ćđéëïăȚ śțńáò. Áí äćí ćßóôć óć áőôȚ ôç śțńá,\n"
+"êÜíôć êëéê óôï đëȚêôńï êáé ćđéëĘîôć ìéá Üëëç."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Calendar"
+msgstr "Çìćńïëüăéï"
+
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr "Ćêôęđùóç"
+"Restore Selected\n"
+"Catalog Entry"
+msgstr "ĆđáíáöïńÜ\n"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
msgstr ""
-"Ăéá íá ćêôőđțóćôć áđü ôç ăńáììȚ ćíôïëțí (đáńÜèőńï ôćńìáôéêïę) êÜíôć śńȚóç "
-"ôçò ćíôïëȚò \"%s <áńśćßï>\" Ț \"%s<áńśćßï>\".\n"
+"Ăéá íá śńçóéìïđïéȚóćôć Ęíáí áđïìáêńőóìĘíï ćêôęđùóç đńĘđćé íá äțóćôć ôï "
+"äéêôőáêü üíïìá ôïő ćîőđçńćôçôȚ ćêôőđțóćùí, êáèțò êáé ôï üíïìá ôïő ćêôőđùôȚ "
+"óć áőôüí ôïí ćîőđçńćôçôȚ."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
+msgid "Iceland"
+msgstr "Éóëáíäßá"
+
+#: ../../common.pm:1
+#, c-format
+msgid "consolehelper missing"
+msgstr "ôï consolehelper ëćßđćé"
+
+#: ../../services.pm:1
+#, c-format
+msgid "stopped"
+msgstr "äćí ćêôćëćßôáé"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Whether the FPU has an irq vector"
msgstr ""
-"Ăéá ìéá ëßóôá ìć ôéò äéáèĘóéìćò ćíôïëĘò ăéá ôïí ôńĘśïí ćêôőđùôȚ êÜíôć êëéê "
-"óôï đëȚêôńï \"Ćêôęđùóç ëßóôáò ćíôïëțí\"."
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
+msgid "Ext2"
+msgstr "Ext2"
+
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#, c-format
+msgid "Expand Tree"
+msgstr "ÁíÜđôőîç äĘíôńïő"
+
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
msgid ""
+"The old \"%s\" driver is blacklisted.\n"
"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
"\n"
-"Ç ćíôïëȚ \"%s\" ćđßóçò óáò ćđéôńĘđćé íá ôńïđïđïéȚóćôć ôéò ńőèìßóćéò ćđéëïățí "
-"ăéá ìéá óőăêćêńéìĘíç ćńăáóßá ćêôęđùóçò. ÁđëÜ đńïóèĘóćôć ôéò ćđéèőìçôĘò "
-"ńőèìßóćéò óôçí ăńáììȚ ćíôïëțí, đ.ś. \"%s<áńśćßï>\"."
+"\n"
+"\n"
+"\n"
+" íĘï."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Ăéá íá ćêôőđțóćôć áđü ôç ăńáììȚ ćíôïëțí (đáńÜèőńï ôćńìáôéêïę) êÜíôć śńȚóç "
-"ôçò ćíôïëȚò \"%s <áńśćßï>\".\n"
+msgid "Expert Mode"
+msgstr "Ăéá ĐńïśùńçìĘíïőò"
#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Printer options"
+msgstr "ĆđéëïăĘò ćêôőđùôȚ"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Local Network adress"
+msgstr "ÔïđéêȚ äéćęèőíóç äéêôęïő"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Backup your System files. (/etc directory)"
+msgstr "Áíôßăńáöï áóöáëćßáò ôùí áńśćßùí ÓőóôȚìáôïò (êáôÜëïăïò /etc )"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
msgid ""
-"Here is a list of the available printing options for the current printer:\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
"\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
+"\n"
+"Do you want to install the updates ?"
msgstr ""
-"ÁőôȚ ćßíáé ìéá ëßóôá ìć ôéò äéáèĘóéìćò ćđéëïăĘò ćêôęđùóçò ăéá ôïí ôńĘśïí "
-"ćêôőđùôȚ:\n"
+"Ôțńá Ęśćôć ôç äőíáôüôçôá íá ćăêáôáóôȚóćôć đáêĘôá áíáâÜèìéóçò. ÁőôÜ ôá\n"
+"đáêĘôá Ęśïőí áíáâáèìéóôćß ìćôÜ ôçí Ęêäïóç ôçò äéáíïìȚò. Ìđïńćß íá đćńéĘśïőí\n"
+"äéïńèțóćéò óöáëìÜôùí Ț áíáâáèìßóćéò áóöÜëćéáò.\n"
+"\n"
+"Ăéá íá êÜíćôć ëȚűç áőôțí ôùí đáêĘôùí đńĘđćé íá Ęśćôć ìéá óęíäćóç óôï "
+"Äéáäßêôőï\n"
+"đïő íá ëćéôïőńăćß.\n"
"\n"
+"ÈĘëćôć íá ćăêáôáóôȚóćôć ôéò áíáâáèìßóćéò ;"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Ôéò ćíôïëĘò áőôĘò ìđïńćßôć ćđßóçò íá ôéò śńçóéìïđïéȚóćôć óôï đćäßï \"ĆíôïëȚ "
-"ćêôőđțóćùí\" ôùí äéáëüăùí ćêôőđțóćùí óć đïëëĘò ćöáńìïăĘò, áëëÜ ìçí đáńĘśćôć "
-"ôï üíïìá áńśćßïő ćäț ćđćéäȚ ôï áńśćßï đńïò ćêôęđùóç ôï đáńĘśćé ç ćöáńìïăȚ.\n"
+msgid "Samba Server"
+msgstr "ĆîőđçńćôçôȚò Samba"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
+"Arguments: (arg, alert=1)\n"
+"\n"
+"Enable/Disable IP spoofing protection."
msgstr ""
-"Ăéá íá ćêôőđțóćôć áđü ôç ăńáììȚ ćíôïëțí (đáńÜèőńï ôćńìáôéêïę) ìđïńćßôć íá "
-"êÜíćôć śńȚóç ôçò ćíôïëȚò \"%s <áńśćßï>\" Ț ìđïńćßôć íá êÜíćôć śńȚóç ăńáöéêïę "
-"ćńăáëćßï ćêôęđùóçò: \"xpp <áńśćßï>\" Ț \" kprinter <áńśćßï>\". Ôï ăńáöéêü "
-"ćńăáëćßï óáò ćđéôńĘđćé íá áëëÜîćôć ćęêïëá ôéò ńőèìßóćéò ćđéëïățí.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Did it work properly?"
-msgstr "Ëćéôïęńăçóć óùóôÜ;"
+msgid "Australian Optus cable TV"
+msgstr "ÊáëùäéáêȚ ôçëćüńáóç Optus ôçò Áőóôńáëßáò"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
msgstr ""
-"Ìßá Ț đćńéóóüôćńćò äïêéìáóôéêĘò óćëßäćò óôÜëèçêáí óôïí ćêôőđùôȚ.\n"
-"Ìđïńćß íá đćńÜóćé êÜđïéïò śńüíïò ìĘśńé ç ćêôęđùóç íá îćêéíȚóćé.\n"
+" <Tab>/<Alt-Tab> ÁëëáăȚ đćäßïő | <Space> ćđéëïăȚ | <F12> ćđüìćíç ïèüíç"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
+msgid "Subnet:"
+msgstr ""
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Zimbabwe"
+msgstr "ÆéìđÜìđïőć"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please enter the host name or IP."
+msgstr "Đáńáêáëț ïńßóôć ôïí äéêôőáêü üíïìá Ț ôçí IP"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "When"
+msgstr "Đüôć"
+
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Second DNS Server (optional)"
+msgstr "Äćęôćńïò ćîőđçńćôçôȚò DNS (đńïáéńćôéêü)"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Finland"
+msgstr "Öéíëáíäßá"
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
+"Arguments: (arg)\n"
"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
msgstr ""
-"Ìßá Ț đćńéóóüôćńćò äïêéìáóôéêĘò óćëßäćò óôÜëèçêáí óôïí ćêôőđùôȚ.\n"
-"Ìđïńćß íá đćńÜóćé êÜđïéïò śńüíïò ìĘśńé ç ćêôęđùóç íá îćêéíȚóćé.\n"
-"ÊáôÜóôáóç ćêôęđùóçò:\n"
-"%s\n"
"\n"
+"\n"
+"\n"
+" êáíĘíá\n"
+"."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Do not print any test page"
-msgstr "Śùńßò ćêôęđùóç äïêéìáóôéêȚò óćëßäáò"
+msgid "Color depth: %s\n"
+msgstr "ÂÜèïò śńțìáôïò: %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Photo test page"
-msgstr "ÄïêéìáóôéêȚ óćëßäá öùôïăńáößáò"
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "Äćí ìđïńćßôć íá áđïćđéëĘîćôć áőôü ôï đáêĘôï. ĐńĘđćé íá áíáâáèìéóôćß"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Alternative test page (A4)"
-msgstr "ĆíáëëáêôéêȚ äïêéìáóôéêȚ óćëßäá (A4)"
+msgid "Loading from floppy"
+msgstr "Öïńôțíćôáé áđü äéóêĘôá"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "ĆíáëëáêôéêȚ äïêéìáóôéêȚ óćëßäá (Letter)"
+msgid ""
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
+msgstr ""
+"Ôï Drakperm śńçóéìïđïéćßôáé ăéá íá äćßôć ôá áńśćßá đïő śńćéÜæćóôć ăéá íá "
+"öôéÜîćôć äéêáéțìáôá, éäéïêôȚôćò êáé ïìÜäćò ìć ôï msec.\n"
+"Ćđßóçò ìđïńćßôć íá ćđćîćńăáóôćßôć ôïőò äéêïęò óáò êáíüíćò đïő èá "
+"áíôéêáôáóôȚóïőí ôïőò đńïćđéëćăìĘíïőò êáíüíćò."
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
#, c-format
-msgid "Standard test page"
-msgstr "ÔőđéêȚ äïêéìáóôéêȚ óćëßäá"
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Print"
-msgstr "Ćêôęđùóç"
+msgid "Slovenia"
+msgstr "Óëïâćíßá"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "No test pages"
-msgstr "Śùńßò äïêéìáóôéêĘò óćëßäćò"
+msgid ""
+"Enter a user\n"
+"%s"
+msgstr ""
+"ĆéóÜăćôć śńȚóôç\n"
+"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid ""
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
+msgstr "PCI óőóêćőȚ PCI"
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "ProgressBar color selection"
+msgstr "ĆđéëïăȚ śńțìáôïò ăńáììȚò đńïüäïő"
+
+#: ../../any.pm:1
#, c-format
msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
msgstr ""
-"Đáńáêáëț ćđéëĘîôć ôéò äïêéìáóôéêĘò óćëßäćò đïő èá ćêôőđùèïęí.\n"
-"Óçì.: Ç äïêéìáóôéêȚ óćëßäá öùôïăńáößáò ìđïńćß íá äéáńêĘóćé áńêćôü śńüíï ăéá "
-"íá ćêôőđùèćß êáé óć ćêôőđùôĘò laser ìć ìéêńȚ ìíȚìç ìđïńćß êáé íá ìçí "
-"ćêôőđùèćß. Óôéò đćńéóóüôćńćò đćńéđôțóćéò ç ćêôęđùóç ôéò ôőđéêȚò äïêéìáóôéêȚò "
-"óćëßäáò áńêćß."
+"ŐđÜńśïőí ïé áêüëïőèćò ćđéëïăĘò.\n"
+"Ìđïńćßôć íá đńïóèĘóćôć êé Üëëćò Ț íá áëëÜîćôć ôéò őđÜńśïőóćò."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Test pages"
-msgstr "ÄïêéìáóôéêĘò óćëßäćò"
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
+#, c-format
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
msgstr ""
-"ÈĘëćôć íá ïńßóćôć áőôüí ôïí ćêôőđùôȚ (\"%s\")\n"
-"óáí ôïí đńïćđéëćăìĘíï ćêôőđùôȚ;"
+"Ćêôćëćß ćíôïëĘò đńïăńáììáôéóìĘíćò áđü ôçí ćíôïëȚ at êáé äĘóìćò ćíôïëțí\n"
+"üôáí ï öüńôïò ôïő óőóôȚìáôïò ćßíáé áńêćôÜ śáìçëüò."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Option %s out of range!"
-msgstr "ĆđéëïăȚ %s ćêôüò ïńßïő!"
+msgid "Radio support:"
+msgstr "ŐđïóôȚńéîç ńáäéïöțíïő:"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Option %s must be a number!"
-msgstr "Ç ćđéëïăȚ %s đńĘđćé íá ćßíáé áńéèìüò!"
+msgid "Installing SANE packages..."
+msgstr "ĆăêáôÜóôáóç đáêĘôïő SANE..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Ç ćđéëïăȚ %s đńĘđćé íá ćßíáé áêĘńáéïò áńéèìüò!"
+msgid "boot disk creation"
+msgstr "äçìéïőńăßá äéóêĘôáò ćêêßíçóçò"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer default settings"
-msgstr "ĆđéëïăȚ ìïíôĘëïő ćêôőđùôȚ"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "LDAP"
+msgstr "LDAP"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"ĆêôőđùôȚò ćî' ïńéóìïę\n"
-"\n"
-" Őűçëü."
+#: ../../bootloader.pm:1
+#, c-format
+msgid "SILO"
+msgstr "SILO"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr ""
+msgid "Change type"
+msgstr "ÁëëáăȚ ôęđïő"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
-msgstr "http://www.lexmark. Linux ¶êőńï."
+#: ../../any.pm:1
+#, c-format
+msgid "SILO Installation"
+msgstr "ĆăêáôÜóôáóç SILO"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Ńőèìßóćéò ćêôőđùôȚ ìćëÜíçò Lexmark"
+msgid "Use CD/DVDROM to backup"
+msgstr "ŚńȚóç CD/DVDROM ăéá ôá áńśćßá áóöáëćßáò"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_messages.pm:1
#, c-format
msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
+"\n"
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
-"Ïé ïäçăïß ôùí ćêôőđùôțí ìćëÜíçò đïő đáńĘśïíôáé áđü ôç Lexmark őđïóôçńßæïőí "
-"ìüíï ôïđéêïęò ćêôőđùôĘò, äćí őđïóôçńßæïőí ćêôőđùôĘò óć áđïìáêńőóìĘíïőò "
-"őđïëïăéóôĘò Ț ćîőđçńćôçôĘò ćêôőđțóćùí. Đáńáêáëț óőíäĘóôć ôïí ćêôőđùôȚ óáò óć "
-"ìéá ôïđéêȚ èęńá Ț ńőèìßóôć ôïí óôï ìçśÜíçìá đïő ćßíáé óőíäćäćìĘíïò."
+"ÓőăśáńçôȚńéá, ç ćăêáôÜóôáóç ïëïêëçńțèçêć.\n"
+"ÁöáéńĘóôć ôçí äéóêĘôá Ț ôï CD ćêêßíçóçò êáé đáôȚóôć return ăéá "
+"ćđáíćêêßíçóç.\n"
+"\n"
+"\n"
+"Ăéá đëçńïöïńßćò óśćôéêÜ ìć äéïńèțóćéò áőôȚò ôçò Ęêäïóçò ôïő Mandrake Linux,\n"
+"óőìâïőëćőôćßôć ôçí óćëßäá: \n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Đëçńïöïńßćò óśćôéêÜ ìć ôéò ńőèìßóćéò ôïő óőóôȚìáôüò óáò őđÜńśïőí óôï "
+"óśćôéêü\n"
+"êćöÜëáéï ôïő ćđßóçìïő ïäçăïę śńȚóçò ôïő Mandrake Linux."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+msgid "paranoid"
+msgstr "Đáńáíïúêü"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Send mail report after each backup to:"
msgstr ""
-"Ńőèìßæćôć Ęíáí ćêôőđùôȚ laser OKI winprinter. Áőôïß ïé ćêôőđùôĘò\n"
-"êÜíïőí śńȚóç ćíüò đïëę ćéäéêïę đńùôïêüëëïő ćđéêïéíùíßáò êáé ăé' áőôü "
-"ëćéôïőńăïęí ìüíï áí ćßíáé óőíäćìĘíïé óôçí đńțôç đáńÜëëçëç èęńá. Áí ćßíáé "
-"óőíäćìĘíïò óć Üëëç èęńá Ț óć Ęíáí ćîőđçńćôçôȚ ćêôőđțóćùí đáńáêáëț óôçí đńțôç "
-"đáńÜëëçëç đńéí ćêôőđțóćôć ôçí đńțôç äïêéìáóôéêȚ óćëßäá. ÄéáöïńćôéêÜ ï "
-"ćêôőđùôȚò äćí èá ëćéôïőńăȚóćé. Ç ńőèìßóćéò ôïő ôęđïő óęíäćóçò èá áăíïçèïęí "
-"áđü ôïí ïäçăü."
+"ÁđïóôïëȚ çëćêôńïíéêïę ìçíęìáôïò ìćôÜ áđü êÜèć ëȚűç áíôéăńÜöùí áóöáëćßáò óôï:"
#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"This command you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications. But here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr "Ćêôęđùóç"
+
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "OKI winprinter configuration"
-msgstr "Ńőèìßóćéò OKI winprinter"
+msgid "Resolution"
+msgstr "ÁíÜëőóç"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
msgstr ""
-"Ï ćêôőđùôȚò óáò äćí őđÜńśćé óôç ëßóôá, đáńáêáëț äéáëĘîôć Ęíáí óőìâáôü Ț Ęíáí "
-"đáńüìïéï ćêôőđùôȚ."
+"Ăéá íá ćêôőđțóćôć óć Ęíáí SMB ćêôőđùôȚ, đńĘđćé íá äțóćôć ôï äéêôőáêü üíïìá "
+"SMB (Óçìćßùóç! Ìđïńćß íá ćßíáé äéáöïńćôéêü áđü ôï äéêôőáêü üíïìá TCP/IP!) "
+"êáé ßóùò ôçí äéćęèőíóç IP ôïő ćîőđçńćôçôȚ ćêôőđțóćùí, ôï üíïìá ôïő ćêôőđùôȚ "
+"óôïí ïđïßï ćđéèőìćßôć đńüóâáóç, êáèțò êáé ïđïéáäȚđïôć áđáńáßôçôç đëçńïöïńßá "
+"đćńß êùäéêïę śńȚóôç, êùäéêïę đńüóâáóçò êáé ôïìĘá Ț ïìÜäáò ćńăáóßáò."
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, fuzzy, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
+" Accept/Refuse icmp echo."
msgstr ""
"\n"
"\n"
-" Printerdrake."
+" ÁđïäïśȚ ¶ńíçóç."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Which printer model do you have?"
-msgstr "Ôé ìïíôĘëï ćêôőđùôȚ Ęśćôć;"
+msgid "reconfigure"
+msgstr "ćđáíáńęèìéóç"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Printer model selection"
-msgstr "ĆđéëïăȚ ìïíôĘëïő ćêôőđùôȚ"
+msgid ""
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+msgstr ""
+"Ç êÜńôá ăńáöéêțí óáò őđïóôçńßæćé ćđéôÜśőíóç ôńéóäéÜóôáôùí ăńáöéêțí óôá XFree "
+"%s,\n"
+"ĐŃÏÓÏŚÇ: ĐĆÉŃÁÌÁÔÉÊÇ ŐĐÏÓÔÇŃÉÎÇ - ÌĐÏŃĆÉ ÍÁ ĐÁĂÙÓĆÉ ÔÏÍ ŐĐÏËÏĂÉÓÔÇ ÓÁÓ."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Reading printer database..."
-msgstr "ÁíÜăíùóç âÜóçò äćäïìĘíùí ćêôőđùôțí..."
+msgid "Xinetd Service"
+msgstr "Őđçńćóßá Xinetd"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Select model manually"
-msgstr "ĆđéëĘîôć ôï ìïíôĘëï śćéńïêßíçôá"
+msgid "access to network tools"
+msgstr "đńüóâáóç óć ćńăáëćßá äéêôęïő"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The model is correct"
-msgstr "Ôï ìïíôĘëï ćßíáé óùóôü"
+msgid "Firmware-Upload for HP LaserJet 1000"
+msgstr ""
+
+#: ../../share/advertising/03-software.pl:1
+#, fuzzy, c-format
+msgid ""
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
+msgstr "Linux ćđćîćńăáóßá"
#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Here is a list of all auto-detected printers. "
+msgstr "Ïńßóôć ç ëßóôá ôùí ćêôőđùôțí đïő áíéśíćęôçêáí áőôüìáôá."
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
+msgstr ""
+"ÓöÜëìá êáôÜ ôçí ćăêáôÜóôáóç ôïő aboot, \n"
+"đńïóđÜèćéá âćâéáóìĘíçò ćăêáôÜóôáóçò, áêüìá êáé áí áőôü Ęśćé óáí áđïôĘëćóìá "
+"ôçí êáôáóôńïöȚ ôçò đńțôçò êáôÜôìçóçò;"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Options Description:\n"
"\n"
-"For your printer Printerdrake has found:\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
-"%s"
msgstr ""
-"Ôï Printerdrake óőíĘêńéíć ôï üíïìá ôïő ìïíôĘëïő áđü ôïí áőôüìáôï ćíôïđéóìü "
-"ìć ôç ëßóôá ôùí ìïíôĘëùí áđü ôçí âÜóç äćäïìĘíùí ćêôőđùôțí ăéá íá ôçí "
-"êáëęôćńç ćđéëïăȚ. ÁőôȚ ç ćđéëïăȚ ìđïńćß íá ćßíáé ëÜèïò, ćéäéêÜ ćÜí ï "
-"ćêôőđùôȚò óáò äćí ćßíáé êáôáśùńçìĘíïò óôçí âÜóç äćäïìĘíùí. Äćßôć ëïéđüí áí ç "
-"ćđéëïăȚ ôïő ćêôőđùôȚ ćßíáé óùóôȚ êáé êÜíôć êëéê óôï \"Ôï ìïíôĘëï ćßíáé óùóôü"
-"\" ćÜí üśé êÜíôć êëéê óôï \"ĆđéëĘîôć ôï ìïíôĘëï śćéńïêßíçôá\" ăéá íá "
-"ćđéëĘîćôć śćéńïêßíçôá ôï ìïíôĘëï áđü ôçí ćđüìćíç ïèüíç\n"
-"Ăéá ôïí ćêôőđùôȚ óáò ôï Printerdrake âńȚêć:\n"
"\n"
-"%s"
+"\n"
+" Drakbackup\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" ćî' ïńéóìïę\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" Drakbackup\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Your printer model"
-msgstr "Ôï ìïíôĘëï ćêôőđùôȚ óáò"
+msgid ""
+"Restore Selected\n"
+"Files"
+msgstr ""
+"ĆđáíáöïńÜ ĆđéëćăìĘíùí\n"
+"Áńśćßùí"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Preparing printer database..."
-msgstr "ÁíÜăíùóç âÜóçò äćäïìĘíùí ćêôőđùôțí..."
+msgid ""
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Location"
-msgstr "Ôïđïèćóßá"
+msgid "Please fill or check the field below"
+msgstr "Đáńáêáëț ćëĘăîôć Ț óőìđëçńțóôć ôï đáńáêÜôù đćäßï"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Description"
-msgstr "ĐćńéăńáöȚ"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "ÈĘëćôć íá áđïèçêćęóćôć ôéò áëëáăĘò ôïő /etc/fstab"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Name of printer"
-msgstr "Œíïìá ćêôőđùôȚ"
+msgid "Boot Protocol"
+msgstr "Đńùôüêïëëï Ćêêßíçóçò"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"ÊÜèć ćêôőđùôȚò śńćéÜæćôáé Ęíá üíïìá (đ.ś. \"ćêôőđùôȚò\").Ôá đćäßá ĐćńéăńáöȚ "
-"êáé Ôïđïèćóßá äćí śńćéÜæćôáé íá óőìđëçńùèïęí. Ćßíáé áđëÜ óśüëéá ăéá ôïőò "
-"śńȚóôćò."
+msgid "LVM-disks %s\n"
+msgstr "Äßóêïé LVM %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr "ĆéóÜăćôć Œíïìá ĆêôőđùôȚ êáé Óśüëéá"
+msgid "The package %s is needed. Install it?"
+msgstr "Ôï đáêĘôï %s ćßíáé áđáńáßôçôï. Íá ćăêáôáóôáèćß;"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr "Ăßíïíôáé äéáèĘóéìćò ïé èęńćò óôï CUPS..."
+msgid "On boot"
+msgstr "Óôçí ćêêßíçóç"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Checking device and configuring HPOJ..."
-msgstr "žëćăśïò êáé ńęèìéóç ôçò óőóêćőȚ HPOJ..."
+msgid "Bus identification"
+msgstr "Áíáăíùńéóôéêü èęńáò"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Photo memory card access on your HP multi-function device"
+msgid "Please make a backup of your data first"
+msgstr "Đáńáêáëț êÜíôć đńțôá Ęíá áíôßăńáöï áóöáëćßáò ôùí äćäïìĘíùí óáò"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Vatican"
+msgstr "Ëćôïíéêü"
+
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "You have more than one hard drive, which one do you install linux on?"
msgstr ""
+"žśćôć đćńéóóüôćńïőò áđü Ęíáí äßóêïőò, óć đïéüí èĘëćôć íá ćăêáôáóôȚóćôć ôï "
+"Linux;"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr "ÓÜńùóç óôç đïëőśńçóôéêȚ óőóêćőȚ HP đïő äéáèĘôćôć"
+msgid "Boot ISO"
+msgstr "Ćêêßíçóç ISO"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installing mtools packages..."
-msgstr "ĆăêáôÜóôáóç đáêĘôïő mtools..."
+msgid "Eritrea"
+msgstr "Ćńőèńáßá"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Installing SANE packages..."
-msgstr "ĆăêáôÜóôáóç đáêĘôïő SANE..."
+msgid "Remove List"
+msgstr "Ëßóôá Áöáßńćóçò"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
-msgid "Installing HPOJ package..."
-msgstr "ĆăêáôÜóôáóç đáêĘôïő HPOJ..."
+msgid "A customizable environment"
+msgstr "žíá đńïóáńìïæüìćíï đćńéâÜëëïí"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
+msgid "Inuktitut"
msgstr ""
-"Ćßíáé ï ćêôőđùôȚò óáò ìéá đïëőśńçóôéêȚ óőóêćőȚ áđü ôçí HP Ț ôçí Sony "
-"(OfficeJet, PSC, LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-"
-"V100), an HP PhotoSmart or an HP LaserJet 2200;"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "A command line must be entered!"
-msgstr "žíá óùóôü URI đńĘđćé íá ćéóáśèćß!"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Command line"
-msgstr "ĂńáììȚ ćíôïëțí"
+msgid "Morocco"
+msgstr "Ìáńüêï"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
+msgid "Which printer model do you have?"
+msgstr "Ôé ìïíôĘëï ćêôőđùôȚ Ęśćôć;"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pipe into command"
-msgstr "ÄéáóùëȚíùóç ćńăáóßáò óć ćíôïëȚ"
+msgid "Add a new printer"
+msgstr "ĐńïóèȚêç íĘïő ćêôőđùôȚ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Detected model: %s %s"
-msgstr "ÂńĘèçêć ôï ìïíôĘëï: %s %s"
+msgid " All of your selected data have been "
+msgstr " Œëá ôá ćđéëćăìĘíá äćäïìĘíá Ęśïőí "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "A valid URI must be entered!"
-msgstr "žíá óùóôü URI đńĘđćé íá ćéóáśèćß!"
+msgid "<-- Delete"
+msgstr "<-- ÄéáăńáöȚ"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer Device URI"
-msgstr "ÓőóêćőȚ ćêôőđùôȚ URI"
+msgid "Nepal"
+msgstr "ÍćđÜë"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Ìđïńćßôć íá ïńßóćôć êáôćőèćßáí ôï URI ăéá ôçí đńüóâáóç óôïí ćêôőđùôȚ. Ôï URI "
-"đńĘđćé íá ôçńćß ćßôć ôéò CUPS ćßôć ôéò Foomatic đńïäéáăńáöĘò. Œśé đùò äćí "
-"őđïóôçńßæïíôáé üëïé ïé URI ôęđïé áđü üëá ôá spoolers."
+msgid "cpu # "
+msgstr "ćđćîćńăáóôȚò # "
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Port"
-msgstr "Èęńá"
+msgid "chunk size"
+msgstr "ìĘăćèïò chunk"
-#: ../../printer/printerdrake.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "Printer host name or IP"
-msgstr "Äéêôőáêü üíïìá ćêôőđùôȚ Ț IP"
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "commands before booting, or 'c' for a command-line."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "The port number should be an integer!"
-msgstr "Ï áńéèìüò èęńáò đńĘđćé íá ćßíáé áêĘńáéïò áńéèìüò!"
+msgid "Problems installing package %s"
+msgstr "Đńüâëçìá êáôÜ ôçí ćăêáôÜóôáóç ôïő đáêĘôïő %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Ôï äéêôőáêü üíïìá ôïő ćêôőđùôȚ Ț ôï IP ëćßđćé!"
+msgid "You will receive an alert if the load is higher than this value"
+msgstr ""
+"Èá ëÜâćôć ìéá ćéäïđïßçóç ćÜí ôï öïńôßï ćßíáé ìćăáëęôćńï áđü áőôȚ ôçí ôéìȚ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
msgstr ""
-"Ăéá íá ćêôőđțóćôć óć Ęíáí ćêôőđùôȚ socket Ț TCP , đńĘđćé íá äțóćôć ôï \n"
-"äéêôőáêü üíïìá ôïő ćêôőđùôȚ êáé đńïáéńćôéêÜ ôïí áńéèìü èęńáò ( ćî ïńéóìïę "
-"9100). Óôïőò ćîőđçńćôçôĘò HP JetDirect Ț èęńá óőíȚèùò ćßíáé 9100, óć Üëëïőò "
-"ćîőđçńćôçôĘò đïéêßëç. Äćßôć ôï ćăśćéńßäéï śńȚóçò ôïő őëéêïę óáò."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
-msgstr "áíéśíćęèçêć ćî' ïńéóìïę."
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Add a scanner manually"
+msgstr "ĐńïóèȚêç óáńùôȚ śćéńïêßíçôá"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "ĆđéëïăĘò ćêôőđùôȚ TCP/Socket"
+msgid "Reload partition table"
+msgstr "ÁíáíĘùóç đßíáêá êáôáôìȚóćùí"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Host \"%s\", port %s"
-msgstr "Host \"%s\", èęńá %s"
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr "Íáé, ćđéèőìț áőôüìáôç đńïóđĘëáóç ìć (śńȚóôçò, đćńéâÜëëïí)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", host \"%s\",èęńá %s"
+msgid "Search for fonts in installed list"
+msgstr "ÁíáæȚôçóç ăńáììáôïóćéńțí óôçí ëßóôá ćăêáôÜóôáóçò"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Scanning network..."
-msgstr "ÁíáæȚôçóç óôï äßêôőï..."
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr "Ôï Ôïđéêü Äßêôőï äćí ôćëćéțíćé ìć `.0', ôćńìáôéóìüò."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer auto-detection"
-msgstr "Áőôüìáôç áíßśíćőóç ćêôőđùôțí"
+msgid "Boot"
+msgstr "Ćêêßíçóç"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "NCP queue name missing!"
-msgstr "Ôï üíïìá ôçò NCP ïőńÜò ëćßđćé!"
+msgid "Tuner type:"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
+msgstr ""
+"¶ëëï\n"
+" Linux\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" áđëü\n"
+"\n"
+" Linux\n"
+"\n"
+" CUPS Ćêôęđùóç Óęóôçìá\n"
+"\n"
+" áđëü ćîőđçńćôçôȚò\n"
+"\n"
+"\n"
+" ćîőđçńćôçôȚò\n"
+" CUPS\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" ćêôćëćßôáé\n"
+"."
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "NCP server name missing!"
-msgstr "Ôï üíïìá ôïő ćîőđçńćôçôȚ NCP ëćßđćé!"
+msgid "\"Menu\" key"
+msgstr "ĐëȚêôńï \"Ìćíïę\""
#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
+msgstr ""
+"\n"
+"\n"
+" Printerdrake."
+
+#: ../../standalone/draksec:1
#, c-format
-msgid "Print Queue Name"
-msgstr "Œíïìá ÏőńÜò ĆêôőđùôȚ"
+msgid "Security Administrator:"
+msgstr "ÄéáśćéńéóôȚò Áóöáëćßáò:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printer Server"
-msgstr "ĆîőđçńćôçôȚò Ćêôőđțóćùí"
+msgid "Please enter your login"
+msgstr "Đáńáêáëț ćéóÜăćôć ôï üíïìá śńȚóôç"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check permissions of files in the users' home."
+msgstr ""
+"áí ïńéóôćß íáé, Ęëćăśïò äéêáéùìÜôùí ôùí áńśćßùí óôïí áńśéêü êáôÜëïăï śńȚóôç."
+
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
msgstr ""
-"Ăéá íá ćêôőđțóćôć óć Ęíáí ćêôőđùôȚ NetWare, đńĘđćé íá äțóćôć ôï üíïìá ôïő "
-"ćîőđçńćôçôȚ ćêôőđțóćùí NetWare (Óçìćßùóç! Ìđïńćß íá ćßíáé äéáöïńćôéêü áđü ôï "
-"äéêôőáêü üíïìá TCP/IP!), ôï üíïìá ôïő ćêôőđùôȚ óôïí ïđïßï ćđéèőìćßôć "
-"đńüóâáóç, êáèțò êáé\n"
-"ïđïéáäȚđïôć áđáńáßôçôç đëçńïöïńßá đćńß śńȚóôç êáé êùäéêïę đńüóâáóçò."
+"Äćí Ęśćôć óęíäćóç ìć ôï äéáäßêôőï.\n"
+"ÄçìéïőńăȚóôć ìßá êÜíïíôáò êëéê óôï 'Ńęèìéóç'"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "NetWare Printer Options"
-msgstr "ĆđéëïăĘò ĆêôőđùôȚ NetWare"
+msgid "Fonts copy"
+msgstr "ÁíôéăńáöȚ Ăńáììáôïóćéńțí"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"ÓőíäĘóôć ôïí ćêôőđùôȚ óáò óć Ęíáí ćîőđçńćôçôȚ Linux êáé óőíäĘóôć óć áőôüí ôá "
-"ìçśáíȚìáôá Windows óáí đćëÜôćò\n"
-"\n"
-"ÈĘëćôć đńáăìáôéêÜ íá óőíćśßóćôć ôéò ńőèìßóćéò ôïő ćêôőđùôȚ óáò đïő êÜíćôć;"
+msgid "Automated"
+msgstr "Áőôüìáôï"
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Do you want to test the configuration?"
+msgstr "ÈĘëćôć íá äïêéìÜóćôć ôéò ńőèìßóćéò;"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
msgstr ""
-"Ńőèìßóôć ôïí ćîőđçńćôçôȚ Windows țóôć íá ćßíáé äéáèĘóéìïò ï ćêôőđùôȚò óôï "
-"đńùôüêïëëï IPP êáé ńőèìßóôć ôéò ćêôőđțóćéò áđü áőôü ôï ìçśÜíçìá ìć ôïí ôęđï "
-"óęíäćóçò \"%s\" óôï Printerdrake.\n"
-"\n"
+"Ï ćêôőđùôȚò \"%s\" áöáéńĘèçêć ìć ćđéôőśßá áđü ôï Star Office/OpenOffice.org/"
+"GIMP"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../standalone/draksec:1
+#, c-format
msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+" to the Internet as a client.\n"
"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
+"High: There are already some restrictions, and more automatic checks "
+"are run every night.\n"
"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
+"Higher: The security is now high enough to use the system as a server "
+"which can accept\n"
+" connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+" should choose a lower level.\n"
"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
+"Paranoid: This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+" features are at their maximum\n"
"\n"
+"Security Administrator:\n"
+" If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+" email)"
msgstr ""
-"ÔïìĘáò Windows ÔïìĘáò Windows ćîőđçńćôçôȚò śńȚóôçò\n"
+"Ôőđéêü: ÁőôȚ ćßíáé ç ôőđéêȚ áóöÜëćéá đïő óőíéóôÜôáé óć ăéá őđïëïăéóôȚ đïő èá "
+"óőíäĘćôáé óôï Äéáäßêôőï ùò đćëÜôçò.\n"
"\n"
-" ÔïìĘáò Windows ćîőđçńćôçôȚò\n"
+" Őűçëü: ŐđÜńśïőí êÜđïéïé đćńéïńéóìïß, êáé ćêôćëïęíôáé đćńéóóüôćńćò "
+"áőôüìáôïé Ęëćăśïé êÜèć âńÜäő.\n"
"\n"
-" ÔïìĘáò Windows ćîőđçńćôçôȚò Ïëïêëçńțèçêć\n"
+"Őűçëüôćńï: Ç áóöÜëćéá ćßíáé áńêćôÜ őűçëȚ ăéá íá êÜíćôć ôï óęóôçìá "
+"ćîőđçńćôçôȚò đïő ìđïńćß íá äćśôćß\n"
+" óőíäĘóćéò áđü đïëëïęò đćëÜôćò. Áí ôï ìçśÜíçìá ćßíáé ìüíï "
+"đćëÜôçò óôï Äéáäßêôőï, ćđéëĘîôć\n"
+" ôï śáìçëüôćńï ćđßđćäï\n"
"\n"
-" ÔïìĘáò Windows ćîőđçńćôçôȚò LPD Printerdrake\n"
+" Đáńáíïúêü ćđßđćäï: Œìïéï ìć ôï đáńáđÜíù ćđßđćäï, áëëÜ ìć ôï óęóôçìá ćíôćëțò "
+"êëćéóôü êáé ìć ôéò ćđéëïăĘò\n"
+" áóöáëćßáò óôï ìĘăéóôï\n"
+"\n"
+"ÄéáśćéńéóôȚò Áóöáëćßáò:\n"
+" Áí Ęśćé ćđéëćăćß ôï 'ĆéäïđïéȚóćéò Áóöáëćßáò' ôüôć èá "
+"áđïóôĘëëïíôáé ćéäïđïéȚóćéò áóöáëćßáò óôïí śńȚóôç (üíïìá śńȚóôç\n"
+" Ț çëćêôńïíéêü ìȚíőìá)"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "SECURITY WARNING!"
-msgstr "ĐŃÏĆÉÄÏĐÏÉÇÓÇ ÁÓÖÁËĆÉÁÓ!"
+msgid "Save packages selection"
+msgstr "ÁđïèȚêćőóç ćđéëïăȚò đáêĘôùí"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Samba share name missing!"
-msgstr "Ôï üíïìá ăéá ôï Samba ëćßđćé!"
+msgid "Remove the last item"
+msgstr "Áöáßńćóç ôïő ôćëćőôáßïő óôïéśćßïő"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Ćßôć ôï üíïìá ôïő ćîőđçńćôçôȚ Ț ç IP ôïő đńĘđćé íá äïèïęí!"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "User list to restore (only the most recent date per user is important)"
+msgstr "śńȚóôçò"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detected"
-msgstr "Ćíôïđßóôçêáí áőôüìáôá"
+msgid "No net boot images created!"
+msgstr "Äćí äçìéïőńăȚèçêáí ćéêüíćò ćêêßíçóçò äéêôęïő!"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Workgroup"
-msgstr "ÏìÜäá ćńăáóßáò:"
+msgid "use pptp"
+msgstr "śńȚóç pptp"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Share name"
-msgstr "Œíïìá đüńïő:"
+msgid "Choose which services should be automatically started at boot time"
+msgstr "ĆđéëĘîôć ôéò őđçńćóßćò đïő èá îćêéíïęí áőôüìáôá êáôÜ ôçí ćêêßíçóç"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SMB server IP"
-msgstr "IP äéćęèőíóç SMB ćîőđçńćôçôȚ"
+msgid "Learn how to use this printer"
+msgstr "ÌÜèćôć đùò íá śćéńéóèćßôć áőôüí ôïí ćêôőđùôȚ"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SMB server host"
-msgstr "Äéêôőáêü üíïìá SMB ćîőđçńćôçôȚ"
+msgid "Configure the network now"
+msgstr "Ńęèìéóç äéêôęïő ôțńá"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr "áíéśíćęèçêć śńȚóôçò."
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose a mirror from which to get the packages"
+msgstr "ĆđéëĘîôć ôüđï áđü ôïí ïđïßï èá ăßíćé ç ëȚűç đáêĘôùí"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
msgstr ""
-"Ăéá íá ćêôőđțóćôć óć Ęíáí SMB ćêôőđùôȚ, đńĘđćé íá äțóćôć ôï äéêôőáêü üíïìá "
-"SMB (Óçìćßùóç! Ìđïńćß íá ćßíáé äéáöïńćôéêü áđü ôï äéêôőáêü üíïìá TCP/IP!) "
-"êáé ßóùò ôçí äéćęèőíóç IP ôïő ćîőđçńćôçôȚ ćêôőđțóćùí, ôï üíïìá ôïő ćêôőđùôȚ "
-"óôïí ïđïßï ćđéèőìćßôć đńüóâáóç, êáèțò êáé ïđïéáäȚđïôć áđáńáßôçôç đëçńïöïńßá "
-"đćńß êùäéêïę śńȚóôç, êùäéêïę đńüóâáóçò êáé ôïìĘá Ț ïìÜäáò ćńăáóßáò."
+"Äćí ìđïńț íá áëëÜîù ìĘăćèïò óôçí êáôÜôìçóç FAT, \n"
+"đńïêëȚèçêć ôï đáńáêÜôù ëÜèïò: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "ĆđéëïăĘò ćêôőđùôȚ SMB (Windows 9x/NT)"
+msgid "Which sector do you want to move it to?"
+msgstr "Óć đïéüí ôïìĘá èĘëćôć íá ìćôáêéíçèćßôć;"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "ĆêôőđùôȚò \"%s\"óôïí ćîőđçńćôçôȚ \"%s\""
+msgid "Do you want to click on this button?"
+msgstr "ÈĘëćôć íá êÜíćôć êëéê óć áőôü ôï êïőìđß;"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", ćêôőđùôȚò \"%s\"óôïí ćîőđçńćôçôȚ \"%s\""
+msgid "Bahamas"
+msgstr "ÌđáśÜìćò"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote printer name missing!"
-msgstr "Ôï áđïìáêńőóìĘíï üíïìá ćêôőđùôȚ ëćßđćé!"
+msgid "Manual configuration"
+msgstr "Śćéńïêßíçôç ńęèìéóç"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Remote host name missing!"
-msgstr "Ôï áđïìáêńőóìĘíï äéêôőáêü üíïìá ëćßđćé!"
+msgid "search"
+msgstr "áíáæȚôçóç"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Remote printer name"
-msgstr "ÁđïìáêńőóìĘíïò üíïìá ćêôőđùôȚ"
+msgid ""
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
+msgstr ""
+"Áőôü ôï đáêĘôï öïńôțíćé ôçí ćđéëćăìĘíç äéÜôáîç đëçêôńïëïăßïő đïő Ęśćé \n"
+"ćđéëćăćß óôï /etc/sysconfig/keyboard. Áőôü ìđïńćß íá ńőèìéóôćß ìć ôçí \n"
+"śńȚóç ôïő ćńăáëćßïő kbdconfig. ĐńĘđćé óśćäüí đÜíôá íá ćßíáé ćíćńăïđïéçìĘíï."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Remote host name"
-msgstr "ÁđïìáêńőóìĘíï äéêôőáêü üíïìá"
+msgid "Xpmac (installation display driver)"
+msgstr "Xpmac (ïäçăüò đńïâïëȚò ćăêáôÜóôáóçò)"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+msgid "Zeroconf host name must not contain a ."
msgstr ""
-"Ăéá íá śńçóéìïđïéȚóćôć Ęíáí áđïìáêńőóìĘíï ćêôęđùóç đńĘđćé íá äțóćôć ôï "
-"äéêôőáêü üíïìá ôïő ćîőđçńćôçôȚ ćêôőđțóćùí, êáèțò êáé ôï üíïìá ôïő ćêôőđùôȚ "
-"óć áőôüí ôïí ćîőđçńćôçôȚ."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "ĆđéëïăĘò áđïìáêńőóìĘíïő lpd ćêôőđùôȚ"
+msgid ""
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
+msgstr ""
+"Ôï Syslog ćßíáé ç őđçńćóßá đïő śńçóéìïđïéïęí đïëëĘò Üëëćò őđçńćóßćò \n"
+"ăéá íá êÜíïőí ćăăńáöĘò óôá áńśćßá đáńáêïëïęèçóçò óőóôȚìáôïò (log files)\n"
+"Óőíßóôáôáé ç óőíćśȚò ëćéôïőńăßá áőôȚò ôçò őđçńćóßáò."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Manual configuration"
-msgstr "Śćéńïêßíçôç ńęèìéóç"
+msgid "Unknown/Others"
+msgstr "¶ăíùóôï/¶ëëï"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "ĐńĘđćé íá ćđéëĘîôć/ïńßóćôć ìéá óőóêćőȚ/ćêôőđùôȚ!"
+msgid "No TV Card detected!"
+msgstr "Äćí âńĘèçêć êÜńôá ôçëćüńáóçò!"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-"(ĐáńÜëëçëćò èęńćò: /dev/lp0, /dev/lp1, ..., áíôßóôïéśćò ôùí LPT1:, "
-"LPT2:, ..., 1ïò ćêôőđùôȚò USB: /dev/usb/lp0, 2ïò USB ćêôőđùôȚò: /dev/usb/"
-"lp1, ...)."
+msgid "Options"
+msgstr "ĆđéëïăĘò"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "ĆđéëĘîôć óć đïßá èȚńá ćßíáé óőíäćäćìĘíïò ï ćêôőđùôȚò óáò."
+msgid "The printer \"%s\" is set as the default printer now."
+msgstr "Ï ćêôőđùôȚò \"%s\" ćßíáé đëĘïí ï đńïćđéëćăìĘíïò ćêôőđùôȚò."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Đáńáêáëț ćđéëĘîôć ôç èęńá üđïő ćßíáé óőíäćäćìĘíïò ï ćêôőđùôȚ óáò Ț ćéóÜăćôć "
-"Ęíá üíïìá óőóêćőȚò/áńśćßïő óôç ăńáììȚ ćéóáăùăȚò"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Please choose the printer to which the print jobs should go."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
msgstr ""
-"Đáńáêáëț ćđéëĘîôć ôïí ćêôőđùôȚ óôïí ïđïßï èá áđïóôĘëëïíôáé ïé ćńăáóßćò "
-"ćêôęđùóçò."
+"Ńőèìßæćôć Ęíáí ćêôőđùôȚ laser OKI winprinter. Áőôïß ïé ćêôőđùôĘò\n"
+"êÜíïőí śńȚóç ćíüò đïëę ćéäéêïę đńùôïêüëëïő ćđéêïéíùíßáò êáé ăé' áőôü "
+"ëćéôïőńăïęí ìüíï áí ćßíáé óőíäćìĘíïé óôçí đńțôç đáńÜëëçëç èęńá. Áí ćßíáé "
+"óőíäćìĘíïò óć Üëëç èęńá Ț óć Ęíáí ćîőđçńćôçôȚ ćêôőđțóćùí đáńáêáëț óôçí đńțôç "
+"đáńÜëëçëç đńéí ćêôőđțóćôć ôçí đńțôç äïêéìáóôéêȚ óćëßäá. ÄéáöïńćôéêÜ ï "
+"ćêôőđùôȚò äćí èá ëćéôïőńăȚóćé. Ç ńőèìßóćéò ôïő ôęđïő óęíäćóçò èá áăíïçèïęí "
+"áđü ôïí ïäçăü."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
-msgstr "áíéśíćęèçêć."
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgstr "ĂćíéÜ ôïő ćđćîćńăáóôȚ (đ.ś. 8 ăéá PentiumIII, ...)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr "Ïńßóôć ç ëßóôá ôùí ćêôőđùôțí đïő áíéśíćęôçêáí áőôüìáôá."
+msgid "Auto-detected"
+msgstr "Ćíôïđßóôçêáí áőôüìáôá"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr "Đńïò ôï đáńüí äćí őđÜńśćé Üëëç ćíáëëáêôéêȚ"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
-msgstr "áíéśíćęèçêć."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "The following printer was auto-detected. "
-msgstr "Ïé đáńáêÜôù ćêôőđùôĘò âńĘèçêáí áőôüìáôá."
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
+msgstr ""
+"Đńüêćéôáé íá ńőèìßóôć ôïí őđïëïăéóôȚ óáò ăéá ôçí ćăêáôÜóôáóç ôï äéáêïìéóôȚ "
+"PXE ùò ćîőđçńćôçôȚ DHCP \n"
+"êáé äéáêïìéóôȚ TFTP ùò äéáêïìéóôȚ ćăêáôáóôÜóćùí.\n"
+"Ìć áőôȚ ôçí ćđéëïăȚ, Üëëïé őđïëïăéóôĘò óôï ôïđéêü óáò äßêôőï èá ìđïńïęí íá "
+"ćăêáôáóôáèïęí ìć ôç śńȚóç áőôïę ôïő őđïëïăéóôȚ.\n"
+"\n"
+"Âćâáéùèćßôć üôé Ęśćôć ńőèìßóćé ôçí đńüóâáóç óôï Äßêôőï/Äéáäßêôőï ìć ôç śńȚóç "
+"ôïő drakconnect đńéí đńïśùńȚóćôć.\n"
+"\n"
+"Óçì. Èá đńĘđćé íá Ęśćôć ìéá êÜńôá äéêôęïő ăéá íá ńőèìßóćôć ôï Ôïđéêü óáò "
+"Äßêôőï (LAN)."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
-"Đáńáêáëț ćđéëĘîôć ôïí ćêôőđùôȚ óôïí ïđïßï èá áđïóôĘëëïíôáé ïé ćńăáóßćò "
-"ćêôęđùóçò Ț äțóôć ôï üíïìá óőóêćőȚò/áńśćßïő óôç ăńáììȚ ćéóáăùăȚò"
+"Äćí őđÜńśćé ćëćęèćńïò śțńïò ăéá 1MB bootstrap! Ç ćăêáôÜóôáóç èá óőíćśéóôćß, "
+"áëëÜ ăéá íá îćêéíȚóćôć ôï óęóôçìÜ óáò, èá śńćéáóôćß íá äçìéïőńăȚóćôć ìéá "
+"êáôÜôìçóç bootstrap ìć ôï DiskDrake"
#: ../../printer/printerdrake.pm:1
#, c-format
@@ -12036,1178 +11940,822 @@ msgstr ""
"Đáńáêáëț ćđéëĘîôć ôïí ćêôőđùôȚ đïő èĘëćôć íá ńőèìßóćôć Ț ćéóÜăćôć Ęíá üíïìá "
"óőóêćőȚò/áńśćßïő óôç ăńáììȚ ćéóáăùăȚò"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr ""
-"ĆíáëëáêôéêÜ, ìđïńćßôć íá ćéóÜăćôć Ęíá üíïìá óőóêćőȚò/áńśćßïő óôç ăńáììȚ "
-"ćéóáăùăȚò"
+msgid "Refuse"
+msgstr "¶ńíçóç"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "HFS"
+msgstr "HFS"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
msgstr ""
-"Áí äćí ćßíáé áőôüò đïő èĘëćôć íá ńőèìßóćôć, ćéóÜăćôć ôï üíïìá óőóêćőȚò/üíïìá "
-"áńśćßïő óôç ăńáììȚ ćéóáăùăȚò"
+"Ôï HardDrake ôńĘśćé ìéá áíßśíćőóç őëéêïę êáé đńïáéńćôéêÜ ńőèìßæćé\n"
+"ôï íĘï/áëëáăìĘíï őëéêü."
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, c-format
-msgid "Available printers"
-msgstr "ÄéáèĘóéìïé ćêôőđùôȚò"
+msgid "Remote Printers"
+msgstr "ÁđïìáêńőóìĘíïé ćêôőđùôĘò"
-#: ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "No printer found!"
-msgstr "Äćí âńĘèçêć ćêôőđùôȚò!"
+msgid "Creating and formatting file %s"
+msgstr "Äçìéïőńăßá êáé ìïńöïđïßçóç áńśćßïő %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "You must enter a device or file name!"
-msgstr "ĐńĘđćé íá ïńßóćôć ìéá óőóêćőȚ Ț Ęíá üíïìá áńśćßïő!"
+msgid "if set to yes, check additions/removals of sgid files."
+msgstr "áí ïńéóôćß íáé, Ęëćăśïò ăéá đńïóèȚêç/áöáßńćóç áńśćßùí sgid."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
-"Äćí âńĘèçêáí ôïđéêïß ćêôőđùôĘò! Ăéá íá ńőèìßóćôć ìüíïé óáò Ęíáí ćêôőđùôȚ "
-"äțóôć ôï üíïìá ćêôőđùôȚ/üíïìá áńśćßïő óôç ăńáììȚ ćéóáăùăȚò (ĐáńÜëëçëćò "
-"èęńćò: /dev/lp0, /dev/lp1, ..., áíôßóôïéśćò ôùí LPT1:, LPT2:, ..., 1ïò "
-"ćêôőđùôȚò USB: /dev/usb/lp0, 2ïò USB ćêôőđùôȚò: /dev/usb/lp1, ...)."
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Local Printer"
-msgstr "Ôïđéêüò ĆêôőđùôȚò"
+msgid "Choose an existing LVM to add to"
+msgstr "ĆđéëĘîôć Ęíá őđÜńśïí LVM óôï ïđïßï èá ăßíćé ç đńïóèȚêç"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "USB printer \\#%s"
-msgstr "ćêôőđùôȚò USB \\#%s"
+msgid "xfs restart"
+msgstr "ćđáíćêêßíçóç xfs"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "ĆêôőđùôȚò óôçí đáńÜëëçëç èȚńá \\#%s"
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
+"Ï ćêôőđùôȚò \"%s\" őđÜńśćé Țäç,\n"
+"Ćßóôć âĘâáéïé ăéá ôçí ćđéêÜëőűç ôùí ńőèìßóćùí;"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "ĆêôőđùôȚò \"%s\" óć ćîőđçńćôçôȚ SMB/Windows \"%s\""
+msgid "No partition available"
+msgstr "äćí őđÜńśïőí äéáèĘóéìćò êáôáôìȚóćéò"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "ĆêôőđùôȚò äéêôęïő \"%s\", èęńá %s"
+msgid "Use the scanners on hosts: "
+msgstr "ŚńȚóç ôùí óáńùôțí óôïőò őđïëïăéóôĘò:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Detected %s"
-msgstr "ÂńĘèçêć ï %s"
+msgid "Unselected All"
+msgstr "ÁđïćđéëïăȚ Œëùí"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "ĆêôőđùôȚò \"%s\" óć ćîőđçńćôçôȚ SMB/Windows \"%s\""
+msgid "Domain Name Resolver"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", ćêôőđùôȚò äéêôęïő \"%s\", èęńá %s"
+msgid "Encryption key (again)"
+msgstr "Êëćéäß êńőđôïăńÜöçóçò (îáíÜ)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"ÓőăśáńçôȚńéá, ï ćêôőđùôȚò óáò ćăêáôáóôÜèçêć êáé ńőèìßóôçêć!\n"
-"\n"
-"Ìđïńćßôć ôțńá íá ćêôőđțóćôć ìć ôçí ćíôïëȚ \"Ćêôęđùóç\" ôçò ćöáńìïăȚò óáò "
-"(óőíȚèùò êÜôù áđü ôï ìćíïę \"Áńśćßï\").\n"
-"\n"
-"Áí èĘëćôć íá đńïóèĘóćôć, íá áöáéńĘóćôć Ț íá ìćôïíïìÜóćôć ôïí ćêôőđùôȚ óáò Ț "
-"áí èĘëćôć íá áëëÜîćôć ôéò đńïćđéëćăìĘíćò ńőèìßóćéò óáò (èĘóç ôïő śáńôéïę, "
-"đïéüôçôá ćêôęđùóçò) ćđéëĘîôć \"ĆêôőđùôȚò\" óôï ôìȚìá \"Őëéêü\"ôïő ÊĘíôńïő "
-"ĆëĘăśïő Mandrake."
+msgid "Samba share name missing!"
+msgstr "Ôï üíïìá ăéá ôï Samba ëćßđćé!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr ""
-"Áőôüìáôç áíßśíćőóç ćêôőđùôțí óőíäćìĘíïé óć ìçśáíȚìáôá đïő Ęśïőí Microsoft "
-"Windows"
+msgid "True Type install done"
+msgstr "Ç ćăêáôÜóôáóçò True Type ïëïêëçńțèçêć"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr "Áőôüìáôç áíßśíćőóç ćêôőđùôțí óőíäćìĘíïé óôï ôïđéêü óáò äßêôőï"
+msgid "Detection in progress"
+msgstr "Áíßśíćőóç óć ćîĘëéîç"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Áőôüìáôç áíßśíćőóç ćêôőđùôțí óőíäćìĘíïé óć áőôü ôï ìçśÜíçìá"
+msgid "Build Whole Kernel -->"
+msgstr "Äçìéïőńăßá Ïëüêëçńïő ĐőńȚíá -->"
+
+#: ../../install_steps.pm:1
+#, c-format
+msgid "Welcome to %s"
+msgstr "Êáëțò ïńßóáôć óôï %s"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "Đáńáêáëț ćéóÜăćôć ôç äéóêĘôá ÁíáâÜèìéóçò ÁńèńùìÜôùí óôïí ïäçăü %s"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Bootsplash"
+msgstr "Bootsplash"
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#, c-format
msgid ""
+"The following printer\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"%s%s\n"
+"is directly connected to your system"
msgstr ""
+"Ï đáńáêÜôù ćêôőđùôȚò\n"
"\n"
-" ĆêôőđùôȚò Ïäçăüò\n"
-"\n"
-"\n"
-"\n"
-" áíéśíćęèçêć\n"
-"\n"
-" Ćđüìćíï ¶êőńï."
+"%s%s\n"
+"ćßíáé Üìćóá óőíäćìĘíïò óôï óęóôçìÜ óáò"
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-" ĆêôőđùôȚò Ïäçăüò\n"
-"\n"
-"\n"
-"\n"
-" áíéśíćęèçêć\n"
-"\n"
-"\n"
-"\n"
-" Ćđüìćíï ¶êőńï."
+#, c-format
+msgid "Printer sharing on hosts/networks: "
+msgstr "Êïéíüśńçóôïé ćêôőđùôĘò óôïőò őđïëïăéóôĘò/äßêôőá: "
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#, c-format
msgid ""
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
"\n"
-" ĆêôőđùôȚò Ïäçăüò\n"
-"\n"
-" ÔïìĘáò Windows \n"
-"\n"
-" áíéśíćęèçêć ÔïìĘáò Windows \n"
-"\n"
-" ÔïìĘáò Windows \n"
-"\n"
-" Ćđüìćíï ¶êőńï."
+"Ç ćíôïëȚ \"%s\" ćđßóçò óáò ćđéôńĘđćé íá ôńïđïđïéȚóćôć ôéò ńőèìßóćéò ćđéëïățí "
+"ăéá ìéá óőăêćêńéìĘíç ćńăáóßá ćêôęđùóçò. ÁđëÜ đńïóèĘóćôć ôéò ćđéèőìçôĘò "
+"ńőèìßóćéò óôçí ăńáììȚ ćíôïëțí, đ.ś. \"%s<áńśćßï>\"."
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
-"\n"
-"Êáëțò ïńßóáôć óôïí Ïäçăü Ńęèìéóçò ĆêôőđùôȚ\n"
-"\n"
-"Ï ïäçăüò áőôüò óáò âïçèÜćé óôçí ćăêáôÜóôáóç ôïđéêțí Ț áđïìáêńőóìĘíùí "
-"ćêôőđùôțí đïő èá śńçóéìïđïéçèïęí óć áőôü êáé óć Üëëá ìçśáíȚìáôá óôï äßêôőï\n"
-"\n"
-"Óáò æçôÜ üëćò ôéò áđáńáßôçôćò đëçńïöïńßćò ăéá íá ńőèìßóćôć ôïőò ćêôőđùôĘò "
-"êáé íá áđïêôȚóćôć đńüóâáóç óć üëïőò ôïőò äéáèĘóéìïőò ïäçăïęò ćêôőđùôțí, "
-"ćđéëïăĘò ôùí ïäçățí êáé ôïőò ôęđïőò óőíäĘóćùí."
+"Óć ìćńéêĘò đćńéđôțóćéò, ï ïäçăüò %s śńćéÜæćôáé ćđéđëĘïí đáńáìĘôńïőò ăéá\n"
+"íá ëćéôïőńăȚóćé óùóôÜ, đáń' üëï đïő óőíȚèùò ëćéôïőńăćß êáé śùńßò áőôĘò.\n"
+"Èá èĘëáôć íá äțóćôć ćđéđëĘïí ćđéëïăĘò Ț íá áöȚóćôć ôïí ïäçăü íá ćîćôÜóćé\n"
+"ôï őëéêü óáò ăéá ôéò đáńáìĘôńïőò đïő śńćéÜæćôáé; Ç ćîĘôáóç áőôȚ ßóùò\n"
+"đńïêáëĘóćé đÜăùìá ôïő óőóôȚìáôïò, áëëÜ äćí èá đńïêáëĘóćé âëÜâç."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Not the correct CD label. Disk is labelled %s."
+msgstr ""
+
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
"\n"
+"%s\n"
"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
+"Click on Configure to launch the setup wizard."
msgstr ""
+"Êáëțò ïńßóáôć óôï ćńăáëćßï ńęèìéóçò ôçò ÊïéíȚò Óęíäćóçò ôïő Äéáäéêôęïő!\n"
"\n"
+"%s\n"
"\n"
-"Ôï Printerdrake äćí ìđüńćóć íá êáèïńßóćé ôï ìïíôĘëï ôïő ćêôőđùôȚ %s. "
-"Đáńáêáëț ćđéëĘîôć ôï óùóôü ìïíôĘëï áđü ôç ëßóôá."
+"ÊÜíôć êëéê óôï Ńęèìéóç ăéá íá îćêéíȚóćôć ôïí ïäçăü ćăêáôÜóôáóçò."
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid ")"
-msgstr ")"
+msgid "Cuba"
+msgstr "Êïęâá"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on "
-msgstr " óôï "
+msgid "Searching for new printers..."
+msgstr "ÁíáæȚôçóç ăéá íĘïőò ćêôőđùôĘò..."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "("
-msgstr "("
+msgid "Belize"
+msgstr "Ìđćëßæ"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configuring printer ..."
-msgstr "Ńőèìßæćôáé ï ćêôőđùôȚò ..."
+msgid " (multi-session)"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Searching for new printers..."
-msgstr "ÁíáæȚôçóç ăéá íĘïőò ćêôőđùôĘò..."
+msgid "Kernel Boot Timeout"
+msgstr "ÔĘëïò Śńüíïő Ćêêßíçóçò ĐőńȚíá"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
-msgstr ""
-"Óçì.: ÁíÜëïăá ìć ôï ìïíôĘëï ôïő ćêôőđùôȚ êáé ôï óęóôçìá ćêôęđùóçò èá "
-"ćăêáôáóôáèćß ćđéđëĘïí ìĘśńé êáé %d MB ëïăéóìéêü"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"Ćßóôć âĘâáéïé üôé èĘëćôć íá ńőèìßóćôć ôçí ćêôęđùóç óć áőôü ôï ìçśÜíçìá;\n"
+"Ç êÜńôá ăńáöéêțí óáò őđïóôçńßæćé ćđéôÜśőíóç ôńéóäéÜóôáôùí ăńáöéêțí ìüíï ìć "
+"ôá XFree %s.\n"
+"Ç êÜńôá óáò őđïóôçńßæćôáé áđü ôá XFree %s ôá ïđïßá ìđïńćß íá äßíïőí êáëęôćńç "
+"őđïóôȚńéîç ăéá äéäéÜóôáôá ăńáöéêÜ."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "ÈĘëćôć íá ćíćńăïđïéȚóćôć ôçí ćêôęđùóç óôïőò đáńáđÜíù ćêôőđùôĘò ;\n"
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "Ï Ïäçăüò ÊáôÜôìçóçò DrakX âńȚêć ôéò đáńáêÜôù ëęóćéò:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr ""
-"ÈĘëćôć íá ćíćńăïđïéȚóćôć ôçí ćêôęđùóç óć ćêôőđùôĘò óôï ôïđéêü óáò äßêôőï;\n"
+msgid "Hungarian"
+msgstr "Ïőăăńéêü"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
-msgstr ""
-"ÈĘëćôć íá ćíćńăïđïéȚóćôć ôçí ćêôęđùóç óôïőò đáńáđÜíù ćêôőđùôĘò Ț óć êÜđïéïí "
-"Üëëïí óôï ôïđéêü óáò äßêôőï;\n"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
msgstr ""
-" (Âćâáéùèćßôć üôé üëïé ïé ćêôőđùôĘò óáò ćßíáé óőíäćìĘíïé êáé óć "
-"ëćéôïőńăßá).\n"
+"ĆđéëĘîôć ôïí đáńïśĘá óáò\n"
+" ĆÜí äćí ćßíáé óôïí êáôÜëïăï, ćđéëĘîôć Unlisted"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr "Äćí âńĘèçêáí ćêôőđùôĘò đïő íá ćßíáé óőíäćìĘíïé óôïí őđïëïăéóôȚ óáò"
+msgid "Automatic time synchronization (using NTP)"
+msgstr "Áőôüìáôïò óőăśńïíéóìüò țńáò (śńȚóç NTP)"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-"\n"
-"Ćßíáé %d ćêôőđùôĘò óőíäćìĘíïé áđćőèćßáò óôï óęóôçìÜ óáò"
+msgid "8 MB"
+msgstr "8 MB"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"žíáò Üăíùóôïò ćêôőđùôȚò ćßíáé óőíäćìĘíïò áđćőèćßáò óôï óęóôçìÜ óáò"
+msgid "LDAP Server"
+msgstr "ĆîőđçńćôçôȚò LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
msgstr ""
-"Ï đáńáêÜôù ćêôőđùôȚò\n"
-"\n"
-"%s%s\n"
-"ćßíáé Üìćóá óőíäćìĘíïò óôï óęóôçìÜ óáò"
+"Ç őđïóôȚńéîç PCMCIA đńïóöĘńćé őđïóôȚńéîç ăéá êÜńôćò äéêôęïő, ìüíôćì êëđ \n"
+"óőíȚèùò óć óőóôȚìáôá laptop. Äćí èá ćêêéíȚóćé ćêôüò áí áőôü æçôçèćß áđü "
+"ôïí \n"
+"śńȚóôç, ïđüôć ćßíáé áóöáëĘò íá ćăêáôáóôáèćß óć óőóôȚìáôá đïő äćí ôï "
+"śńćéÜæïíôáé."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"Ï đáńáêÜôù ćêôőđùôȚò\n"
-"\n"
-"%s%s\n"
-"ćßíáé Üìćóá óőíäćìĘíïé óôï óęóôçìÜ óáò"
+msgid "Choose your country"
+msgstr "ĆđéëĘîôć śțńá"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The following printers\n"
"\n"
-"%s%s\n"
-"are directly connected to your system"
+"- System Files:\n"
msgstr ""
-"Ïé đáńáêÜôù ćêôőđùôĘò\n"
"\n"
-"%s%s\n"
-"ćßíáé Üìćóá óőíäćìĘíïé óôï óęóôçìÜ óáò"
+"- Áńśćßá ÓőóôȚìáôïò:\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "and %d unknown printers"
-msgstr "êáé %d Üăíùóôïé ćêôőđùôĘò"
+msgid "Standalone Tools"
+msgstr "ÎćśùńéóôÜ Ćńăáëćßá"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "and one unknown printer"
-msgstr "êáé Ęíáò Üăíùóôïò ćêôőđùôȚò"
+msgid "Where"
+msgstr "Đïő"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Checking your system..."
-msgstr "žëćăśïò ôïő óőóôȚìáôïò óáò..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Restarting CUPS..."
-msgstr "Ćđáíćêêßíçóç XFS"
+msgid "but not matching"
+msgstr "áëëÜ äćí ôáéńéÜæćé"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
msgstr ""
-"O ćîőđçńćôçôȚò ćßíáé Țäç óôç ëßóôá, äćí ìđïńćßôć íá ôïí đńïóèĘóćôć îáíÜ.\n"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr "Đáńáäćßăìáôá óùóôțí IP:\n"
+"Ćäț ìđïńćßôć íá ćđéëĘîćôć Ęíáí ćíáëëáêôéêü ïäçăü (OSS Ț ALSA) ăéá ôçí êÜńôá "
+"Țśïő óáò (%s)"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Ç äéćęèőíóç IP đïő ćéóÜăáôć äćí ćßíáé óùóôȚ.\n"
+msgid "Configuring PCMCIA cards..."
+msgstr "Ńęèìéóç êáńôțí PCMCIA ..."
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Server IP missing!"
-msgstr "Ëćßđćé ç IP ôïő ćîőđçńćôçôȚ!"
+msgid "kdesu missing"
+msgstr "ôï kdesu ëćßđćé"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr ""
+msgid "Encryption key"
+msgstr "Êëćéäß êńőđôïăńÜöçóçò"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "CUPS"
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remove selected server"
-msgstr "Áöáßńćóç ćđéëćăìĘíïő ćîőđçńćôçôȚ"
+msgid "Christmas Island"
+msgstr "ÍȚóïé ŚńéóôïőăĘííùí"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Edit selected server"
-msgstr "Ćđćîćńăáóßá ćđéëćăìĘíïő ćîőđçńćôçôȚ"
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr ""
+"Ç ćăêáôÜóôáóç ôïő đńïăńÜììáôïò ćêêßíçóçò áđĘôőść. ĐńïêëȚèçêć ôï áêüëïőèï "
+"óöÜëìá:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Add server"
-msgstr "ĐńïóèȚêç ćîőđçńćôçôȚ"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr "ĐńïóèȚêç CUPS."
+msgid "EIDE/SCSI channel"
+msgstr "ÊáíÜëé EIDE/SCSI"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "IP address of host/network:"
-msgstr "Äéćęèőíóç IP ôïő őđïëïăéóôȚ/äéêôęïő:"
+msgid "Set this printer as the default"
+msgstr "Ïńéóìüò áőôïę ôïő ćêôőđùôȚ ùò đńïćđéëćăìĘíïő"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
-"Áőôüò ï őđïëïăéóôȚò/äßêôőï ćßíáé Țäç óôç ëßóôá, äćí ìđïńćß íá đńïóôćèćß "
-"îáíÜ.\n"
+msgid "partition %s"
+msgstr "êáôÜôìçóç %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr ""
+msgid "Paranoid"
+msgstr "Đáńáíïúêü"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Host/network IP address missing."
-msgstr "Ëćßđćé ç äéćęèőíóç ôïő ŐđïëïăéóôȚ/Äéêôęïő."
+msgid "NIS"
+msgstr "NIS"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr ""
+msgid "<-- Del User"
+msgstr "<-- ÄéáăńáöȚ ŚńȚóôç"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Sharing of local printers"
-msgstr "ÊïéíȚ śńȚóç ôïđéêțí ćêôőđùôțí"
+msgid "Location on the bus"
+msgstr "ÈĘóç ôïő äéáęëïő"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove selected host/network"
-msgstr "Áöáßńćóç ćđéëćăìĘíïő őđïëïăéóôȚ/äßêôőï"
+msgid "No printer found!"
+msgstr "Äćí âńĘèçêć ćêôőđùôȚò!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Edit selected host/network"
-msgstr "Ćđćîćńăáóßá ćđéëćăìĘíïő őđïëïăéóôȚ/äßêôőï"
+msgid "the vendor name of the device"
+msgstr "ôï üíïìá êáôáóêćőáóôȚ ôçò óőóêćőȚò"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Add host/network"
-msgstr "ĐńïóèȚêç őđïëïăéóôȚ/äßêôőï"
+msgid "Erase entire disk"
+msgstr "ÄéáăńáöȚ ïëüêëçńïő ôïő äßóêïő"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
-"ÁőôÜ ćßíáé ôá ìçśáíȚìáôá üđïő ïé ôïđéêÜ óőíäćìĘíïé ćêôőđùôĘò(çò) đńĘđćé íá "
-"ćßíáé äéáèĘóéìïé:"
+msgid " (Default)"
+msgstr " (ĐńïćđéëćăìĘíïò)"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, fuzzy, c-format
msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
msgstr ""
-"Đüôć CUPS\n"
-"\n"
-" LPD LPRng CUPS\n"
"\n"
"\n"
"\n"
" ćîőđçńćôçôȚò\n"
+" ćîőđçńćôçôȚò<SERVER_LEVEL> ćîőđçńćôçôȚò\n"
"\n"
"."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "Áőôüìáôç äéüńèùóç ôçò ńęèìéóçò CUPS"
+msgid "Automatic reconfiguration"
+msgstr "Áőôüìáôç ćđáíáńęèìéóçò"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Japanese text printing mode"
-msgstr "ÁëëáăȚ óőóôȚìáôïò ćêôęđùóçò"
+msgid "Receiving Speed:"
+msgstr "Ôáśęôçôá ËȚűçò:"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr "CUPS CUPS Œëá Printerdrake CUPS ćîőđçńćôçôȚò ćîőđçńćôçôȚò."
+#: ../../lang.pm:1
+#, c-format
+msgid "Turks and Caicos Islands"
+msgstr "ÍȚóïé Ôïęńêò êáé ÊáÀêïò"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "None"
-msgstr "ÊáíĘíáò"
+msgid "permissions"
+msgstr "äéêáéțìáôá"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Additional CUPS servers: "
-msgstr "Đńüóèćôïé ćîőđçńćôçôĘò CUPS: "
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "No remote machines"
-msgstr "(óć áőôü ôï ìçśÜíçìá)"
+msgid "<- Previous"
+msgstr "<- Đńïçăïęìćíï"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Custom configuration"
-msgstr "ĐńïóáńìïóìĘíç Ńęèìéóç"
+msgid "Internet Connection Sharing configuration"
+msgstr "Ńęèìéóç ÊïéíȚò óęíäćóçò Äéáäéêôęïő"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Êïéíüśńçóôïé ćêôőđùôĘò óôïőò őđïëïăéóôĘò/äßêôőá: "
+msgid "Toggle between flat and group sorted"
+msgstr "ĆíáëëáăȚ ìćôáîę ćđßđćäçò êáé ïìáäéêȚò ôáîéíüìçóçò"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr "Âńćßôć áőôüìáôá äéáèĘóéìïőò ćêôőđùôĘò óć áđïìáêńőóìĘíá ìçśáíȚìáôá"
+msgid "Themes"
+msgstr "ÈĘìáôá"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr ""
-"Ïé ćêôőđùôĘò óć áőôü ôï ìçśÜíçìá ćßíáé äéáèĘóéìïé óć Üëëïőò őđïëïăéóôĘò"
+msgid "Options: %s"
+msgstr "ĆđéëïăĘò: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
-"Ćđßóçò ćäț ìđïńćßôć íá ïńßóćôć áí ïé ćêôőđùôĘò đïő âńßóêïíôáé óć "
-"áđïìáêńőóìĘíá ìçśáíȚìáôá èá ćßíáé áőôüìáôá äéáèĘóéìïé êáé óć áőôü ôï "
-"ìçśÜíçìá."
+"Śńçóéìïđïéćßôć ôïí %s ùò đńüăńáììá ćêêßíçóçò.\n"
+"ÊÜíôć êëéê óôï Ńęèìéóç ăéá íá îćêéíȚóćôć ôïí ïäçăü ćăêáôÜóôáóçò."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
-msgstr ""
-"Ćäț ìđïńćßôć íá ćđéëĘîćôć áí ïé óőíäćìĘíïé ćêôőđùôĘò áőôïę ôï ìçśáíȚìáôïò èá "
-"ćßíáé đńïóâÜóéìïé áđü áđïìáêńőóìĘíá ìçśáíȚìáôá êáé áđü đïéá."
+msgid "OKI winprinter configuration"
+msgstr "Ńőèìßóćéò OKI winprinter"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "CUPS printer configuration"
-msgstr "Ńőèìßóćéò êïéíȚò śńȚóçò ćêôőđùôțí CUPS"
+#: ../../lang.pm:1
+#, c-format
+msgid "Saint Helena"
+msgstr "ÍȚóïò Áăßáò ĆëĘíçò"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
-msgstr "Áőôüìáôç áíßśíćőóç ćêôőđùôĘò (Ôïđéêïß, TCP/Socket, êáé ćêôőđùôĘò SMB)"
+msgid "Security Level"
+msgstr "Ćđßđćäï Áóöáëćßáò"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
+"Some steps are not completed.\n"
"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
msgstr ""
+"ÌćńéêÜ âȚìáôá äćí ïëïêëçńțèçêáí.\n"
"\n"
-"ĆêôőđùôĘò đïő ćßíáé óőíäćìĘíïé óć áđïìáêńőóìĘíïőò ćîőđçńćôçôĘò CUPS äćí "
-"śńćéÜæćôáé íá ńőèìéóôïęí ćäț, èá áíéśíćőèïęí áőôüìáôá."
+"ÈĘëćôć óßăïőńá íá ćăêáôáëćßűćôć ôțńá;"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "How is the printer connected?"
-msgstr "Đțò ćßíáé óőíäćäćìĘíïò ï ćêôőđùôȚò óáò;"
+msgid "Sudan"
+msgstr "ÓïőäÜí"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Select Printer Connection"
-msgstr "Ôńüđïò óęíäćóçò ćêôőđùôȚ"
+msgid "Polish (qwertz layout)"
+msgstr "Đïëùíéêü (äéÜôáîç qwertz)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
-
-#: ../../security/help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the user umask."
-msgstr ""
-"\n"
-"\n"
-" śńȚóôçò."
+msgid "Syria"
+msgstr "Óőńßá"
-#: ../../security/help.pm:1
+# NOTE: this message will be displayed at boot time; that is
+# only the ascii charset will be available on most machines
+# so use only 7bit for this message (and do transliteration or
+# leave it in English, as it is the best for your language)
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
#, c-format
msgid ""
-"Arguments: (val)\n"
+"Welcome to %s the operating system chooser!\n"
"\n"
-"Set the shell timeout. A value of zero means no timeout."
-msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (size)\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
"\n"
-"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
+"KALOS HRTHATE STON EPILOGEA LEITOURGIKOU SYSTHMATOS %s!\n"
+"\n"
+"EPILEXTE LEITORGIKO SYSTHMA APO TON PARAPANO KATALOGO \n"
+"H PERIMENETE %d DEUTEROLEPTA GIA THN AYTOMATH EPILOGH.\n"
+"\n"
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr "áí ïńéóôćß íáé, Ęëćăśïò ăéá đńïóèȚêç/áöáßńćóç áńśćßùí sgid."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, check open ports."
-msgstr "áí ïńéóôćß íáé, Ęëćăśïò ăéá áíïéśôĘò èęńćò."
-
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
-"áí íáé, áđïóôïëȚ ôçò áíáöïńÜò ôáśőäńïìćßïő óć áőôȚí ôçí äéćęèőíóç Ț áëëéțò "
-"óôïí root."
+msgid "Portuguese"
+msgstr "Đïńôïăáëéêü"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr "áí ïńéóôćß íáé, áđïôĘëćóìá áíáöïńÜò ćëĘăśïő ìĘóù ôáśőäńïìćßïő."
+msgid "Loopback file name: "
+msgstr "Œíïìá áńśćßïő loopback: "
-#: ../../security/help.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr "áí ïńéóôćß íáé, Ęëćăśïò ôùí áńśćßùí/êáôáëüăùí ăéá ćăăńáöȚ áđü üëïőò."
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "Ç IP äéćęèőíóç DNS đńĘđćé íá ćßíáé ôçò ìïńöȚò 1.2.3.4"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr "áí ïńéóôćß íáé, áđïôĘëćóìá áíáöïńÜò ćëĘăśïő óôï tty"
+msgid "Serbia"
+msgstr "Óćńâßá"
-#: ../../security/help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr "áí ïńéóôćß íáé, Ęëćăśïò ôçò âÜóçò äćäïìĘíùí rpm."
+msgid "Newzealand"
+msgstr "ÍĘá Æçëáíäßá"
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
+msgid "This directory should remain within the root filesystem"
msgstr ""
-"áí ïńéóôćß íáé, Ęëćăśïò ôùí óőóêćőțí äéêôęïő ăéá áäéÜêńéôç êáôÜóôáóç "
-"ëćéôïőńăßáò."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr "áí ïńéóôćß íáé, ćêôĘëćóç ćëĘăśùí chkrootkit"
+"Áőôüò ï êáôÜëïăïò đńĘđćé íá đáńáìćßíćé óôï ńéæéêü óęóôçìá áńśćßùí (root)"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
-msgstr ""
-"áí ïńéóôćß íáé, Ęëćăśïò äéêáéùìÜôùí ôùí áńśćßùí óôïí áńśéêü êáôÜëïăï śńȚóôç."
+msgid "CapsLock key"
+msgstr "ĐëȚêôńï Capslock"
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr "áí ïńéóôćß íáé, Ęëćăśïò ăéá đńïèĘóćéò/áöáéńĘóćéò áńśćßùí suid root."
+msgid "Install bootloader"
+msgstr "Đńüăńáììá ćêêßíçóçò"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr "áí ïńéóôćß íáé, áđïôĘëćóìá áíáöïńÜò ćëĘăśïő óôï syslog."
+msgid "Select the memory size of your graphics card"
+msgstr "ĆđéëĘîôć ôï ìĘăćèïò ìíȚìçò ôçò êÜńôáò ăńáöéêțí"
-#: ../../security/help.pm:1
-#, c-format
+#: ../../standalone.pm:1
+#, fuzzy, c-format
msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
-"áí ïńéóôćß íáé, Ęëćăśïò ăéá êćíïęò êùäéêïęò đńüóâáóçò, ăéá êáíĘíáí êùäéêü "
-"đńüóâáóçò óôï /etc/shadow êáé ăéá śńȚóôćò ìć id 0 ćêôüò áđü ôïí root."
+"\n"
+" Äßêôőï Äéáäßêôőï\n"
+"\n"
+" ćî' ïńéóìïę\n"
+"\n"
+"\n"
+" ìćôÜ âßáò ìćôÜ âßáò\n"
+"\n"
+"."
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr "áí ïńéóôćß íáé, ćêôĘëćóç ćëĘăśùí áóöáëćßáò êáèçìćńéíÜ."
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Dynamic IP Address Pool:"
+msgstr "Äéćęèőíóç:"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr "áí ïńéóôćß íáé, ćđáëȚèćőóç checksum ăéá ôá áńśćßá suid/sgid."
+msgid "LVM name?"
+msgstr "üíïìá LVM;"
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr "áí ïńéóôćß íáé, Ęëćăśïò êćíțí êùäéêțí đńüóâáóçò óôï /etc/shadow."
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
+msgstr "ÏńéóìĘíćò óőóêćőĘò óôï ôìȚìá őëéêïę \"%s\" áöáéńĘèçêáí:\n"
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "if set to yes, report unowned files."
-msgstr "áí ïńéóôćß íáé, áíáöïńÜ Üăíùóôùí áńśćßùí."
+msgid "Found %s %s interfaces"
+msgstr "ÂńĘèçêáí %s %s đńïóáńìïăćßò"
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the root umask."
+msgid "sticky-bit"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
-"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+msgid "Post Install"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
-msgstr ""
+msgid "The internal domain name"
+msgstr "Ôï ćóùôćńéêü üíïìá ôïìĘá"
-#: ../../security/help.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
-msgstr ""
+msgid "Card IRQ"
+msgstr "IRQ êÜńôáò"
#: ../../security/help.pm:1
#, fuzzy, c-format
msgid ""
-"Arguments: (name)\n"
+"Arguments: (umask)\n"
"\n"
-"Add the name as an exception to the handling of password aging by msec."
+"Set the user umask."
msgstr ""
"\n"
"\n"
-" ĐńïóèȚêç."
+" śńȚóôçò."
-#: ../../security/help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
-"\n"
-"\n"
-" śńȚóôçò ćđßđćäï."
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
+#, c-format
+msgid "logdrake"
+msgstr "logdrake"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, fuzzy, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
"\n"
"\n"
-" êáèçìćńéíÜ."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
-msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
"\n"
-"Use password to authenticate users."
-msgstr ""
-
-#: ../../security/help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Arguments: (arg)\n"
"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
"\n"
"\n"
-" ÏìÜäá ćńăáóßáò: śńȚóôçò."
-
-#: ../../security/help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Arguments: (arg)\n"
"\n"
-"Enable/Disable msec hourly security check."
-msgstr ""
+" êáíĘíá\n"
"\n"
"\n"
-" ùńéáßá."
+"."
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "ĆđéëĘîôć ïäçăü äéóêĘôáò ăéá äçìéïőńăßá äéóêĘôáò ćêêßíçóçò"
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
-msgstr ""
+msgid "LILO with text menu"
+msgstr "LILO ìć ìćíïę êćéìĘíïő"
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
-msgstr ""
-
-#: ../../security/help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"\n"
-" óőóêćőȚ."
+msgid "Everything (no firewall)"
+msgstr "Œëćò (śùńßò ôïßśïò đńïóôáóßáò)"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
-msgstr ""
-
-#: ../../security/help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
-msgstr ""
-"\n"
-"\n"
-"\n"
-" ćîőđçńćôçôȚò\n"
-" ćîőđçńćôçôȚò<SERVER_LEVEL> ćîőđçńćôçôȚò\n"
-"\n"
-"."
+msgid "You must specify a kernel image"
+msgstr "ĐńĘđćé íá ïńßóćôć ìéá ćéêüíá đőńȚíá"
-#: ../../security/help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
-msgstr ""
-"\n"
-"\n"
-"\n"
-" êáíĘíá\n"
-"."
+#: ../../printer/main.pm:1
+#, c-format
+msgid ", multi-function device on USB"
+msgstr ", đïëőśńçóôéêȚ óőóêćőȚ óôçí USB"
-#: ../../security/help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"The argument specifies if clients are authorized to connect\n"
-"to the X server on the tcp port 6000 or not."
-msgstr ""
-"\n"
-"\n"
-"\n"
-" ćîőđçńćôçôȚò."
+#: ../../interactive/newt.pm:1
+#, c-format
+msgid "Do"
+msgstr "ÊÜíôï"
-#: ../../security/help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
-msgstr ""
-"\n"
-"\n"
-" Ïëïêëçńțèçêć\n"
-"\n"
-"."
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "Óęíäćóç ìć ôïí ôüđï ăéá ôçí ëȚűç ôùí äéáèĘóéìùí đáêĘôùí..."
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
+msgid "Lithuanian AZERTY (old)"
+msgstr "Ëéèïőáíéêü AZERTY (đáëéü)"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
+msgid "Brazilian (ABNT-2)"
+msgstr "ÂńáæéëéÜíéêï (ABNT-2)"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-msgstr ""
+msgid "IP address of host/network:"
+msgstr "Äéćęèőíóç IP ôïő őđïëïăéóôȚ/äéêôęïő:"
-#: ../../security/help.pm:1
-#, fuzzy, c-format
+#: ../../standalone/draksplash:1
+#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
-"\n"
-"\n"
-" śńȚóôçò."
+"óőíôćôáăìĘíç y ôçò ăńáììȚò đńïüäïő\n"
+"áđü ôçí ćđÜíù áńéóôćńȚ ăùíßá"
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
+msgid "System installation"
+msgstr "ĆăêáôÜóôáóç"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
-msgstr ""
+msgid "Saint Vincent and the Grenadines"
+msgstr "¶ăéïò ÂéêĘíôéïò êáé Ăńćíáíôßíćò"
-#: ../../security/help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
-msgstr ""
-"\n"
-"\n"
-" ÁđïäïśȚ ¶ńíçóç."
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "/File/_Open"
+msgstr "/Áńśćßï/¶_íïéăìá"
#: ../../security/help.pm:1
#, fuzzy, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
-" Accept/Refuse broadcasted icmp echo."
+"The argument specifies if clients are authorized to connect\n"
+"to the X server on the tcp port 6000 or not."
msgstr ""
"\n"
"\n"
-" ÁđïäïśȚ ¶ńíçóç."
-
-#: ../../security/help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Arguments: (arg)\n"
"\n"
-"Accept/Refuse bogus IPv4 error messages."
-msgstr ""
-"\n"
-"\n"
-" ÁđïäïśȚ ¶ńíçóç."
-
-#: ../../security/level.pm:1
-#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "ÄéáśćéńéóôȚò Áóöáëćßáò (đńïóđĘëáóç Ț ôáśőäńïìćßï)"
-
-#: ../../security/level.pm:1
-#, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
+" ćîőđçńćôçôȚò."
-#: ../../security/level.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Use libsafe for servers"
-msgstr "ŚńȚóç libsafe ăéá äéáêïìéóôĘò"
+msgid "Location of auto_install.cfg file"
+msgstr "ÈĘóç ôïő áńśćßïő auto_install.cfg"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Security level"
-msgstr "Ćđßđćäï áóöáëćßáò"
+msgid "Open Firmware Delay"
+msgstr "¶íïéăìá ÊáèőóôĘńçóçò Firmware"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please choose the desired security level"
-msgstr "ĆđéëĘîôć ôï ćđéèőìçôü ćđßđćäï áóöáëćßáò"
+msgid "Hungary"
+msgstr "Ïőăăáńßá"
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "DrakSec Basic Options"
-msgstr "ÂáóéêĘò ĆđéëïăĘò DrakSec"
+msgid "Total progess"
+msgstr "ÓőíïëéêȚ đńüïäïò"
-#: ../../security/level.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Ç áóöÜëćéá ćßíáé ßäéá ôïő đńïçăïęìćíïő ćđéđĘäïő, ìć ôï óęóôçìá ôćëćßùò "
-"êëćéóôü. Ç áóöÜëćéá ćßíáé óôï ìĘăéóôï äőíáôü."
+msgid "Color configuration"
+msgstr "Ńęèìéóç śńùìÜôùí"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"Ìć áőôü ôï ćđßđćäï áóöáëćßáò ćßíáé äőíáôȚ ç śńȚóç ôïő óőóôȚìáôïò óôï ùò "
-"ćîőđçńćôçôȚ.\n"
-"Ç áóöÜëćéá ćßíáé áńêćôÜ őűçëȚ țóôć íá äĘśćôáé ôáőôüśńïíćò óőíäĘóćéò áđü "
-"đïëëïęò đćëÜôćò.\n"
-"Óçì: Áí ôï ìçśÜíçìá ćßíáé ìüíï ăéá ôçí śńȚóç ùò đćëÜôç óôï Äéáäßêôőï ôüôć "
-"êáëęôćńá íá ćđéëĘîćôć śáìçëüôćńï ćđßđćäï áóöÜëćéáò"
+msgid "New Zealand"
+msgstr "ÍĘá Æçëáíäßá"
#: ../../security/level.pm:1
#, c-format
@@ -13218,858 +12766,713 @@ msgstr ""
"ŐđÜńśïőí Țäç êÜđïéïé đćńéïńéóìïß, êáé đćńéóóüôćńïé Ęëćăśïé ćêôćëïęíôáé êÜèć "
"âńÜäő."
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Áőôü ćßíáé ôï óőíçèéóìĘíï ćđßđćäï áóöáëćßáò ăéá Ęíá óęóôçìá đïő èá óőíäćèćß "
-"ùò đćëÜôçò óôï Äéáäßêôőï."
+msgid "please choose the date to restore"
+msgstr "Đáńáêáëț ćđéëĘîôć ôçí çìćńïìçíßá ćđáíáöïńÜò"
-#: ../../security/level.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Switching from ext2 to ext3"
+msgstr "ÁëëáăȚ áđü ext2 óć ext3"
+
+#: ../../printer/data.pm:1
+#, c-format
+msgid "LPRng"
+msgstr "LPRng"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Netherlands Antilles"
+msgstr "ÏëëáíäéêĘò Áíôßëëćò"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Browse to new restore repository."
+msgstr "áíáæȚôçóç íĘï."
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
msgstr ""
-"Ôțńá őđÜńśïőí êùäéêïß đńüóâáóçò, áëëÜ ç śńȚóç ôïő óőóôȚìáôïò óć äßêôőï áêüìá "
-"äćí óőíßóôáôáé."
+"\n"
+"Êáëțò ïńßóáôć óôïí Ïäçăü Ńęèìéóçò ĆêôőđùôȚ\n"
+"\n"
+"Ï ïäçăüò áőôüò óáò âïçèÜćé óôçí ćăêáôÜóôáóç ôïđéêțí Ț áđïìáêńőóìĘíùí "
+"ćêôőđùôțí đïő èá śńçóéìïđïéçèïęí óć áőôü êáé óć Üëëá ìçśáíȚìáôá óôï äßêôőï\n"
+"\n"
+"Óáò æçôÜ üëćò ôéò áđáńáßôçôćò đëçńïöïńßćò ăéá íá ńőèìßóćôć ôïőò ćêôőđùôĘò "
+"êáé íá áđïêôȚóćôć đńüóâáóç óć üëïőò ôïőò äéáèĘóéìïőò ïäçăïęò ćêôőđùôțí, "
+"ćđéëïăĘò ôùí ïäçățí êáé ôïőò ôęđïőò óőíäĘóćùí."
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "and %d unknown printers"
+msgstr "êáé %d Üăíùóôïé ćêôőđùôĘò"
+
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
msgstr ""
-"Áőôü ôï ćđßđćäï đńĘđćé íá śńçóéìïđïéçèćß ìć đńïóïśȚ. ÊÜíćé ôï óęóôçìÜ óáò\n"
-"đéï ćęśńçóôï, áëëÜ đïëę ćőáßóèçôï. Äćí đńĘđćé íá śńçóéìïđïéçèćß óć óęóôçìá\n"
-"óőíäćäćìĘíï óôï Äéáäßêôőï Ț LAN. Äćí őđÜńśïőí êùäéêïß đńüóâáóçò."
-#: ../../security/level.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Paranoid"
-msgstr "Đáńáíïúêü"
+msgid "No ISDN PCI card found. Please select one on the next screen."
+msgstr "Äćí âńĘèçêć êÜńôá ISDN. Đáńáêáëț ćđéëĘîôć ìéá áđü ôçí đáńáêÜôù ïèüíç."
-#: ../../security/level.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Higher"
-msgstr "Őűçëüôćńï"
+msgid "GB"
+msgstr "GB"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "High"
-msgstr "Őűçëü"
+msgid "Please give a user name"
+msgstr "Đáńáêáëț ćéóÜăćôć üíïìá śńȚóôç"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Poor"
-msgstr "Öôùśü"
+msgid "Enable CD Boot?"
+msgstr "Ćíćńăïđïßçóç ćêêßíçóçò áđü CD;"
-#: ../../security/level.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Welcome To Crackers"
-msgstr "Êáëțò ïńßóáôć óôïőò Crackers"
+msgid " enter `void' for void entry"
+msgstr "ćéóÜăćôć ôçí ëĘîç `void' ăéá êćíȚ ćéóáăùăȚ"
-#: ../../standalone/XFdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Đáńáêáëț ćđáíáóőíäćèćßôć ùò %s ăéá ćíćńăïđïßçóç ôùí áëëáățí"
+msgid "on Hard Drive"
+msgstr "óôïí Óêëçńü Äßóêï"
-#: ../../standalone/XFdrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Đáńáêáëț áđïóőíäćèćßôć êáé ìćôÜ đáôȚóôć Ctrl-Alt-BackSpace"
+msgid "Winmodem connection"
+msgstr "Óęíäćóç Winmodem"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgid ""
+"\n"
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
msgstr ""
-"ôï /etc/hosts.allow êáé /etc/hosts.deny Ęśïőí Țäç ńőèìéóôćß - äćí "
-"ìćôáôńÜđçêáí"
+"\n"
+"ÓőăśáńçôȚńéá, ï ćêôőđùôȚò óáò ćăêáôáóôÜèçêć êáé ńőèìßóôçêć!\n"
+"\n"
+"Ìđïńćßôć ôțńá íá ćêôőđțóćôć ìć ôçí ćíôïëȚ \"Ćêôęđùóç\" ôçò ćöáńìïăȚò óáò "
+"(óőíȚèùò êÜôù áđü ôï ìćíïę \"Áńśćßï\").\n"
+"\n"
+"Áí èĘëćôć íá đńïóèĘóćôć, íá áöáéńĘóćôć Ț íá ìćôïíïìÜóćôć ôïí ćêôőđùôȚ óáò Ț "
+"áí èĘëćôć íá áëëÜîćôć ôéò đńïćđéëćăìĘíćò ńőèìßóćéò óáò (èĘóç ôïő śáńôéïę, "
+"đïéüôçôá ćêôęđùóçò) ćđéëĘîôć \"ĆêôőđùôȚò\" óôï ôìȚìá \"Őëéêü\"ôïő ÊĘíôńïő "
+"ĆëĘăśïő Mandrake."
-#: ../../standalone/drakTermServ:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "ĐńĘđćé íá äçìéïőńăȚóù đńțôá ôï /etc/dhcpd.conf!"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Set the password history length to prevent password reuse."
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "ÊÜôé äćí đȚăć êáëÜ! Ćßíáé ôï mkisofs ćăêáôćóôçìĘíï;"
+msgid "Now, you can run xawtv (under X Window!) !\n"
+msgstr "Ôțńá ìđïńćßôć íá ćêôćëĘóćôć ôï xawtv (ìĘóá áđü ôá Ś Window!) !\n"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr "Ç ćéêüíá Etherboot ISO ćßíáé ç %s"
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr ""
+"Äćí őđÜńśćé áńêćôüò śțńïò swap ăéá ôçí ïëïêëȚńùóç ôçò ćăêáôÜóôáóçò, đáńáêáëț "
+"đńïóèĘóôć"
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "No floppy drive available!"
-msgstr "Äćí őđÜńśćé äéáèĘóéìïò ïäçăüò äéóêĘôáò!"
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "%s on %s"
+msgstr "%s (Èęńá %s)"
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Floppy can be removed now"
-msgstr "Ôțńá ìđïńćßôć íá áöáéńĘóôć ôç äéóêĘôá"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
+"Linux\n"
+"\n"
+"\n"
+" HardDrake Linux\n"
+"\n"
+" ÔïìĘáò Windows \n"
+"\n"
+"\n"
+" ćîőđçńćôçôȚò Äéáäßêôőï\n"
+" Äéáäßêôőï\n"
+" ćîőđçńćôçôȚò\n"
+" ćîőđçńćôçôȚò."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Couldn't access the floppy!"
-msgstr "Äćí ćßíáé äőíáôȚ ç đńüóâáóç óôç äéóêĘôá!"
+msgid "Which is your timezone?"
+msgstr "Đïéá ćßíáé ç æțíç țńáò;"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please insert floppy disk:"
-msgstr "Đáńáêáëț ćéóÜăćôć äéóêĘôá Ćêêßíçóçò:"
+msgid "Guinea"
+msgstr "ĂïőéíĘá"
-#: ../../standalone/drakTermServ:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Write Config"
-msgstr "ĆăăńáöȚ Ńęèìéóçò"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr "Äéćęèőíóç:"
+msgid "The system is now connected to the Internet."
+msgstr "Ôï óęóôçìá ćßíáé ôțńá óőíäćìĘíï óôï Äéáäßêôőï."
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-"Ïé đćńéóóüôćńćò ôéìĘò Ęśïőí ćîáśèćß \n"
-"áđü ôï óęóôçìÜ óáò\n"
-"ÁëëÜîôć ôéò áí śńćéÜæćôáé."
+msgid "South Georgia and the South Sandwich Islands"
+msgstr "Íüôéá Ăćùńăßá êáé Íüôéá ÍçóéÜ ÓÜíôïőéôò"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "Ńőèìßóćéò ĆîőđçńćôçôȚ dhcpd"
+msgid "Japan (broadcast)"
+msgstr "Éáđùíßá (ćíáĘńéá)"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "IP Range End:"
-msgstr "Œńéï Ôćńìáôéóìïę IP:"
+msgid "Mozambique"
+msgstr "Ìïæáìâßêç"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "IP Range Start:"
-msgstr "Œńéï Ćêêßíçóçò ÉŃ:"
+msgid "Icon"
+msgstr "Ćéêïíßäéï"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Name Servers:"
-msgstr "Œíïìá Ćîőđçńćôçôțí:"
+msgid "Please choose what you want to backup"
+msgstr "Đáńáêáëț ćđéëĘîôć ôé èĘëćôć íá đÜńćôć óć áíôßăńáöá áóöáëćßáò"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Domain Name:"
-msgstr "Œíïìá ÔïìĘá:"
+msgid "256 colors (8 bits)"
+msgstr "256 śńțìáôá (8 bits)"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "Broadcast Address:"
-msgstr "Äéćęèőíóç ÌćôÜäïóçò:"
+msgid "Read-write"
+msgstr "Read-write"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Subnet Mask:"
-msgstr ""
+msgid "Size: %s\n"
+msgstr "ÌĘăćèïò: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Routers:"
-msgstr "ÄńïìïëïăçôĘò:"
+msgid "Hostname: "
+msgstr "Œíïìá óőóôȚìáôïò: "
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Netmask:"
-msgstr "ÌÜóêá äéêôęïő:"
+msgid "Chunk size %s\n"
+msgstr "ÌĘăćèïò chunk %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Subnet:"
+msgid "Build the future of Linux!"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Local Printer"
+msgstr "Ôïđéêüò ĆêôőđùôȚò"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
msgstr ""
-"ĐńĘđćé íá ćêêéíçèćß îáíÜ ï ÄéáśćéńéóôȚò ĐńïâïëȚò ăéá íá éóśęóïőí üëćò ïé "
-"áëëáăĘò. \n"
-"(áđü ôçí êïíóüëá - service dm restart)"
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "dhcpd Config..."
-msgstr "Ńęèìéóç dhcpd..."
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Delete Client"
-msgstr "ÄéáăńáöȚ ĐćëÜôç"
+msgid "ADSL connection"
+msgstr "Óęíäćóç ADSL"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "<-- Edit Client"
-msgstr "<-- Ćđćîćńăáóßá ĐćëÜôç"
+msgid "No configuration, please click Wizard or Advanced.\n"
+msgstr "Êáìßá ńęèìéóç, êÜíôć êëéê óôïí Ïäçăü Ț óôï ĐńïśùńçìĘíá.\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Add Client -->"
-msgstr "ĐńïóèȚêç ĐćëÜôç -->"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Allow Thin Clients"
-msgstr "ĐńïóèȚêç/Áöáßńćóç Đćëáôțí"
+msgid "Error!"
+msgstr "ÓöÜëìá!"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Thin Client"
-msgstr "ĐćëÜôçò DHCP"
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "cable connection detected"
+msgstr "áíéśíćęèçêć êáëùäéáêȚ óęíäćóç"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No net boot images created!"
-msgstr "Äćí äçìéïőńăȚèçêáí ćéêüíćò ćêêßíçóçò äéêôęïő!"
+msgid "Permission denied transferring %s to %s"
+msgstr "¶ńíçóç đńüóâáóçò êáôÜ ôç ìćôáöïńÜ ôïő %s óôï %s"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "type: %s"
-msgstr "ôęđïò: %s"
+msgid "/_Report Bug"
+msgstr "/_ÁíáöïńÜ Bug"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "<-- Del User"
-msgstr "<-- ÄéáăńáöȚ ŚńȚóôç"
+msgid "Resize"
+msgstr "ÁëëáăȚ ìćăĘèïőò"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add User -->"
-msgstr "ĐńïóèȚêç śńȚóôç -->"
+msgid "Dominica"
+msgstr "Íôïìßíéêá"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please enter the device name to use for backup"
msgstr ""
-"\n"
-" ĆîőđçńćôçôȚò\n"
-" ÄéáăńáöȚ śńȚóôçò ĆîőđçńćôçôȚò ćíćńăïđïßçóç."
+"Đáńáêáëț ćéóÜăćôáé ôï üíïìá óőóêćőȚò ăéá ôç śńȚóç ôùí áíôéăńÜöùí áóöáëćßáò"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Delete All NBIs"
-msgstr "ÄéáăńáöȚ Œëùí ôùí NBIs"
+msgid "Resolution: %s\n"
+msgstr "ÁíÜëőóç: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "<-- Delete"
-msgstr "<-- ÄéáăńáöȚ"
+msgid "matching"
+msgstr "ôáéńéÜæćé"
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
#, c-format
-msgid "This will take a few minutes."
-msgstr "Áőôü èá äéáńêĘóćé ìćńéêÜ ëćđôÜ."
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
+msgstr ""
+"Áäőíáìßá đńüóâáóçò ôùí áńèńùìÜôùí đïő áíôéóôïéśïęí óôïí đőńȚíá óáò (ôï "
+"áńśćßï %s ëćßđćé), ăćíéêÜ áőôü óçìáßíćé üôé ç äéóêĘôá ćêêßíçóçò äćí ćßíáé óć "
+"óőăśńïíéóìü ìć ôï ÌĘóï ćăêáôÜóôáóçò ( đáńáêáëț äçìéïőńăȚóôć ìéá íĘá äéóêĘôá "
+"ćêêßíçóçò)"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Build All Kernels -->"
-msgstr "Œëá"
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"Đáńáêáëț ćđéëĘîôć ôçí êáôÜëëçëç èęńá. Ăéá đáńÜäćéăìá,\n"
+"ç\"COM1\" óôá Windows ïíïìÜæćôáé \"ttyS0\" óôï GNU/Linux."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "No NIC selected!"
-msgstr "Äć ćđéëĘśôçêć NIC!"
+msgid "The following packages are going to be removed"
+msgstr "Èá áöáéńćèïęí ôá đáńáêÜôù đáêĘôá "
-#: ../../standalone/drakTermServ:1
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
#, c-format
-msgid "Build Single NIC -->"
-msgstr "Äçìéïőńăßá Ìïíïę NIC -->"
+msgid "Connect to the Internet"
+msgstr "Óęíäćóç óôï Äéáäßêôőï"
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "No kernel selected!"
-msgstr "Äćí ćđéëĘśôçêć đőńȚíáò!"
+msgid "Use existing partitions"
+msgstr "ŚńȚóç őđáńśïőóțí êáôáôìȚóćùí"
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Build Whole Kernel -->"
-msgstr "Äçìéïőńăßá Ïëüêëçńïő ĐőńȚíá -->"
+msgid "Canadian (Quebec)"
+msgstr "Êáíáäéêü (ÊćìđĘê)"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Boot ISO"
-msgstr "Ćêêßíçóç ISO"
+msgid "Mouse device: %s\n"
+msgstr "ÓőóêćőȚ đïíôéêéïę: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Boot Floppy"
-msgstr "ÄéóêĘôá Ćêêßíçóçò"
+msgid "Reselect correct fonts"
+msgstr "ÎáíáćđéëĘîôć ôéò óùóôĘò ăńáììáôïóćéńĘò"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
+"Options Description:\n"
"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
-"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
"\n"
msgstr ""
"\n"
"\n"
-" Äçìéïőńăßá Root\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" PCI\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
"\n"
" ćîőđçńćôçôȚò\n"
"\n"
-" Óęóôçìá\n"
-" ćíćńăïđïßçóç\n"
-"\n"
-"\n"
-" ćîőđçńćôçôȚò\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" ćîőđçńćôçôȚò\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" ćîőđçńćôçôȚò\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" áđćíćńăïđïßçóç\n"
-"\n"
-"\n"
-"\n"
-" śńȚóôçò\n"
-" ćîőđçńćôçôȚò\n"
" ćîőđçńćôçôȚò\n"
-"\n"
-"\n"
-" ćî' ïńéóìïę áđćíćńăïđïßçóç\n"
-" èĘóç\n"
-"\n"
-"\n"
-" Äçìéïőńăßá\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-#: ../../standalone/drakTermServ:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"Options\n"
"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
"\n"
"\n"
-" Ćőśáńéóôïęìć:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+" Œśé\n"
+" ćîőđçńćôçôȚò\n"
+"."
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
-msgstr ""
-"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
+msgid "We are now going to configure the %s connection."
+msgstr "Ôțńá èá ńőèìßóïőìć ôçí %s óęíäćóç."
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Add/Del Clients"
-msgstr "ĐńïóèȚêç/Áöáßńćóç Đćëáôțí"
+msgid "MandrakeExpert Corporate"
+msgstr "MandrakeExpert Corporate"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Add/Del Users"
-msgstr "ĐńïóèȚêç/Áöáßńćóç Śńçóôțí"
+msgid ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Write protection"
+msgstr "Áőôüìáôç áíßśíćőóç ćêôőđùôțí"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "You've not selected any font"
+msgstr "äćí âńĘèçêć êáìßá ăńáììáôïóćéńÜ\n"
+
+#: ../../steps.pm:1
#, c-format
-msgid "Net Boot Images"
-msgstr "Ćéêüíćò Net Boot"
+msgid "Language"
+msgstr "ĆđéëĘîôć ăëțóóá"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "Etherboot Floppy/ISO"
+msgid "Printer model selection"
+msgstr "ĆđéëïăȚ ìïíôĘëïő ćêôőđùôȚ"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Stop Server"
-msgstr "Ôćńìáôéóìüò ĆîőđçńćôçôȚ"
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
+msgstr ""
+"ÌćôÜ ôçí áëëáăȚ ôęđïő óôçí êáôÜôìçóç %s, üëá ôá äćäïìĘíá óć áőôȚí ôçí "
+"êáôÜôìçóç èá śáèïęí"
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
#, c-format
-msgid "Start Server"
-msgstr "Ćêêßíçóç ĆîőđçńćôçôȚò"
+msgid "%d seconds"
+msgstr "%d äćőôćńüëćđôá"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Disable Server"
-msgstr "Áđćíćńăïđïßçóç ĆîőđçńćôçôȚ"
+msgid "Insert a blank floppy in drive %s"
+msgstr "ĆéóÜăćôć Üäćéá äéóêĘôá óôïí ïäçăü %s"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Enable Server"
-msgstr "Ćíćńăïđïßçóç ĆîőđçńćôçôȚ"
+msgid "A valid URI must be entered!"
+msgstr "žíá óùóôü URI đńĘđćé íá ćéóáśèćß!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "Ńęèìéóç ôïő ÄéáêïìéóôȚ Ôćńìáôéêïę Mandrake"
+msgid "Found \"%s\" interface do you want to use it ?"
+msgstr "ÂńĘèçêć ìéá äéćđáöȚ \"%s\" èĘëćôć íá ôç śńçóéìïđïéȚóćôć ;"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Remove the last item"
-msgstr "Áöáßńćóç ôïő ôćëćőôáßïő óôïéśćßïő"
+msgid "Re-configure interface and DHCP server"
+msgstr "Ćđáíáńęèìéóç äéćđáöȚò êáé ôïő ćîőđçńćôçôȚ DHCP"
-#: ../../standalone/drakautoinst:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Add an item"
-msgstr "ĐńïóèȚêç óôïéśćßïő"
+msgid "Sound configuration"
+msgstr "Ńęèìéóç Țśïő"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Auto Install"
-msgstr "Áőôüìáôç ćăêáôÜóôáóç"
+msgid "Photo test page"
+msgstr "ÄïêéìáóôéêȚ óćëßäá öùôïăńáößáò"
-#: ../../standalone/drakautoinst:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Ç äéóêĘôá äçìéïőńăȚèçêć ìć ćđéôőśßá.\n"
-"Ìđïńćßôć ôțńá íá ćđáíáëÜâćôć ôçí ćăêáôÜóôáóç."
+msgid "Custom disk partitioning"
+msgstr "ĐńïóáńìïóìĘíćò êáôáôìȚóćéò äßóêïő"
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congratulations!"
-msgstr "ÓőăśáńçôȚńéá!"
+msgid "Enter Printer Name and Comments"
+msgstr "ĆéóÜăćôć Œíïìá ĆêôőđùôȚ êáé Óśüëéá"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"The following printers\n"
"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
+"Ïé đáńáêÜôù ćêôőđùôĘò\n"
"\n"
-" Êáëțò Ïńßóáôć\n"
-"\n"
-"Ïé đáńÜìćôńïé ăéá ôçí áőôüìáôç ćăêáôÜóôáóç őđÜńśïőí óôá ôìȚìáôá áńéóôćńÜ"
+"%s%s\n"
+"ćßíáé Üìćóá óőíäćìĘíïé óôï óęóôçìÜ óáò"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Creating auto install floppy"
-msgstr "Äçìéïőńăßá äéóêĘôáò áőôüìáôçò ćăêáôÜóôáóçò"
+msgid "type: %s"
+msgstr "ôęđïò: %s"
-#: ../../standalone/drakautoinst:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "manual"
-msgstr "śćéńïêßíçôá"
+msgid "Slovakian (QWERTY)"
+msgstr "Óëïâáêßáò (QWERTY)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/draksound:1
#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Đáńáêáëț êáèïńßóôć ćÜí ăéá êÜèć âȚìá èá ăßíćé ćđáíÜëçűç ôçò ćăêáôÜóôáóçò, Ț "
-"ćÜí ăßíćé śćéńïêßíçôá"
+msgid "No Sound Card detected!"
+msgstr "Äćí âńĘèçêć ÊÜńôá čśïő!"
-#: ../../standalone/drakautoinst:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Ńęèìéóç Áőôüìáôùí ÂçìÜôùí"
+msgid "Mouse Port"
+msgstr "Èęńá đïíôéêéïę"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "replay"
-msgstr "ćđáíÜëçűç"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
msgstr ""
-"ĆăêáôÜóôáóç\n"
-"\n"
-" Ćđáíáöüńôùóç\n"
-"\n"
-"\n"
-"\n"
-" Ïëïêëçńțèçêć?"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "Ńőèìßóćéò áőôüìáôçò ćăêáôÜóôáóçò"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Äćí ìđïńț íá âńù ôï áđáńáßôçôï áńśćßï ćéêüíáò `%s'."
+"ĐńĘđćé íá ćêêéíçèćß îáíÜ ï ÄéáśćéńéóôȚò ĐńïâïëȚò ăéá íá éóśęóïőí üëćò ïé "
+"áëëáăĘò. \n"
+"(áđü ôçí êïíóüëá - service dm restart)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Error!"
-msgstr "ÓöÜëìá!"
+msgid "Ftp Server"
+msgstr "ÄéáêïìéóôȚò Ftp"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, fuzzy, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
+"Enable/Disable msec hourly security check."
msgstr ""
"\n"
-" ĆđáíáöïńÜ\n"
"\n"
-" Drakbackup\n"
-"\n"
-" Drakbackup\n"
-"\n"
-" óçìáíôéêü\n"
+" ùńéáßá."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "%s fonts conversion"
+msgstr "ìćôáôńïđȚ ăńáììáôïóćéńțí pfm"
+
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
+msgid "the type of bus on which the mouse is connected"
+msgstr "Ï ôęđïò ôçò èęńá óôçí ïđïßá ćßíáé óőíäćäćìĘíï ôï đïíôßêé óáò."
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Uganda"
+msgstr "ÏőăêÜíôá"
+
+#: ../../security/help.pm:1
+#, c-format
msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+"Arguments: (size)\n"
"\n"
+"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
-"\n"
-"\n"
-"\n"
-" ćîőđçńćôçôȚò\n"
-"\n"
-" ćîőđçńćôçôȚò\n"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#: ../../help.pm:1
+#, c-format
msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
"\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
"\n"
-msgstr ""
-"ĐćńéăńáöȚ\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
"\n"
-" Drakbackup\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
"\n"
-" Óęóôçìá\n"
-" ŚńȚóôćò\n"
-" ¶ëëï\n"
-" Œëá ¶ëëï ÔïìĘáò Windows \n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
"\n"
-" Drakbackup\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
"\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
"\n"
-" CDROM\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
"\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
"\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
"\n"
-" Drakbackup\n"
-" śńȚóôçò\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
"\n"
-" ćî' ïńéóìïę\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
+msgstr ""
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Comoros"
+msgstr "Êïìüńćò"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid ""
"\n"
"\n"
-" Ńęèìéóç\n"
"\n"
+"We are now going to configure the %s connection.\n"
"\n"
-" ĆđáíáöïńÜ\n"
"\n"
+"Press OK to continue."
+msgstr ""
"\n"
"\n"
"\n"
+"Ôțńá èá ńőèìßóïőìć ôçí %s óęíäćóç.\n"
"\n"
"\n"
+"ĐáôȚóôć ôï OK ăéá íá îćêéíȚóćôć"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Yaboot mode"
+msgstr "Ëćéôïőńăßá Yaboot"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
+msgstr "USA (êáëùäéáêȚ)"
+
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
-"áíáâáèìßóćéò 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft."
-"com>"
+"Áäőíáìßá ćđáíćêêßíçóçò ôïő LiLo!\n"
+"ĆêôćëĘóôć \"lilo\" ùò root óôçí ăńáììȚ ćíôïëțí ăéá íá ïëïêëçńùèćß ç "
+"ćăêáôÜóôáóç ôïő èĘìáôïò LiLo"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Ăćíéêïę ôęđïő ìć 3 đëȚêôńá"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
-msgstr ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+msgid "Select another media to restore from"
+msgstr "ĆđéëĘîôć Üëëï ìĘóï ăéá ôçí áíÜêôçóç"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Software Manager"
+msgstr "ÄéáśćéńéóôȚò Ëïăéóìéêïę"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
-"restore description:\n"
+"Restore Description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
@@ -14081,82 +13484,19 @@ msgid ""
"\n"
" - Incremental Backups:\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" śńȚóôçò\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
+" - Differential Backups:\n"
" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
msgstr ""
"\n"
@@ -14164,20 +13504,7 @@ msgstr ""
"\n"
"\n"
"\n"
-"\n"
-"\n"
-"\n"
-" ÏìÜäá ćńăáóßáò:\n"
-"\n"
-"\n"
-" ŚńȚóôçò\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" ¶ëëï\n"
+" śńȚóôçò\n"
"\n"
"\n"
"\n"
@@ -14196,4904 +13523,5649 @@ msgstr ""
"\n"
"\n"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
+msgid "Re-submit"
+msgstr "ĆéóÜăćôć îáíÜ"
#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-" Drakbackup\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" ćî' ïńéóìïę\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Drakbackup\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
+#, c-format
+msgid "CD in place - continue."
+msgstr "Ôï CD ćßíáé óôç èĘóç ôïő - óőíĘśćéá"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Drakbackup"
-msgstr "Drakbackup"
+msgid "KB"
+msgstr "KB"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restore"
-msgstr "ĆđáíáöïńÜ"
+msgid "Network & Internet"
+msgstr "Äßêôőï & Äéáäßêôőï"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup Now"
-msgstr "Áíôßăńáöá áóöáëćßáò Ôțńá"
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Ëéèïőáíéêü \"öùíçôéêü\" QWERTY"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Advanced Configuration"
-msgstr "ĐńïśùńçìĘíćò Ńőèìßóćéò"
+msgid "Net Boot Images"
+msgstr "Ćéêüíćò Net Boot"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Wizard Configuration"
-msgstr "Ńőèìßóćéò Ïäçăïę"
+msgid "Sharing of local scanners"
+msgstr "ÊïéíȚ śńȚóç ôïđéêțí óáńùôțí"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "View Backup Configuration."
-msgstr "ĐńïâïëȚ Ńőèìßóćùí ÁíôéăńÜöùí Áóöáëćßáò"
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Backup Now from configuration file"
-msgstr "Äçìéïőńăßá ÁíôéăńÜöùí Áóöáëćßáò áđü ôï áńśćßï ńőèìßóćùí"
+msgid "Services and deamons"
+msgstr "Őđçńćóßćò êáé äáßìïíćò"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Drakbackup Configuration"
-msgstr "Ńőèìßóćéò Drakbackup"
+msgid "Remote host name missing!"
+msgstr "Ôï áđïìáêńőóìĘíï äéêôőáêü üíïìá ëćßđćé!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Total Progress"
-msgstr "ÓőíïëéêȚ Đńüïäïò"
+msgid "with /usr"
+msgstr "ìć /usr"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sending files..."
-msgstr "ÁđïóôïëȚ áńśćßùí..."
+msgid "Network"
+msgstr "Äßêôőï"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "files sending by FTP"
-msgstr "áđïóôïëȚ áńśćßùí ìĘóù FTP"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgstr ""
+"Áőôüìáôç áíßśíćőóç ćêôőđùôțí óőíäćìĘíïé óć ìçśáíȚìáôá đïő Ęśïőí Microsoft "
+"Windows"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup other files"
-msgstr "Áíôßăńáöá áóöáëćßáò Üëëùí áńśćßùí"
+msgid "This password is too simple"
+msgstr "Ï êùäéêüò đńüóâáóçò ćßíáé đïëę áđëüò"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup user files"
-msgstr "Áíôßăńáöá áóöáëćßáò áńśćßùí śńçóôțí"
+msgid "Slovakian (QWERTZ)"
+msgstr "Óëïâáêßáò (QWERTZ)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "Backup system files"
-msgstr "Áíôßăńáöá áóöáëćßáò ôïő óőóôȚìáôïò áńśćßùí"
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Under Devel ... please wait."
-msgstr "Őđü ÁíÜđôőîç ... đáńáêáëț đćńéìĘíćôć."
+msgid "Truly minimal install (especially no urpmi)"
+msgstr "ĐńáăìáôéêÜ ćëÜśéóôç ćăêáôÜóôáóç (ćéäéêÜ śùńßò urpmi)"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+" Transfer \n"
+"Now"
msgstr ""
-"Äćí âńĘèçêć ńęèìéóç\n"
-"đáńáêáëț êÜíôć êëéê óôï Ïäçăü Ț óôï ĐńïśùńçìĘíï."
+" ÌćôáöïńÜ \n"
+"Ôțńá"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please select data to backup..."
-msgstr "Đáńáêáëț ćđéëĘîôć ôá áńśćßá đïő èá ăßíïőí áíôßăńáöá áóöáëćßáò"
+msgid "Use daemon"
+msgstr "ŚńȚóç äáßìïíá"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
#, c-format
-msgid "Please select media for backup..."
-msgstr "Đáńáêáëț ćđéëĘîôć ôï ìĘóï ăéá ôá áíôßăńáöá áóöáëćßáò..."
+msgid "Authentication"
+msgstr "Đéóôïđïßçóç"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please select data to restore..."
-msgstr "Đáńáêáëț ćđéëĘîôć ôá äćäïìĘíá đńïò ćđáíáöïńÜ..."
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgstr "ĐńïóèȚêç áőôïę ôïő ćêôőđùôȚ óôï Star Office/OpenOffice.org/GIMP"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Ôá đáńáêÜôù đáêĘôá đńĘđćé íá ćăêáôáóôáèïęí:\n"
+msgid "Additional CUPS servers: "
+msgstr "Đńüóèćôïé ćîőđçńćôçôĘò CUPS: "
-#: ../../standalone/drakbackup:1
-#, c-format
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"ÓöÜëìá êáôÜ ôçí áđïóôïëȚ áńśćßïő ìĘóù FTP.\n"
-"Đáńáêáëț äéïńèțóôć ôç ńęèìéóç ôïő FTP."
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
+msgstr "áíéśíćęèçêć ćî' ïńéóìïę."
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount %s?"
+msgstr "Đïę èĘëćôć íá óőíäĘóćôć ôï %s;"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Restore Via Network"
+msgstr "ĆđáíáöïńÜ ìĘóù äéêôęïő"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Algeria"
+msgstr "Áëăćńßá"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd-size"
+msgstr "ìĘăćèïò Initrd"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
-"ÓöÜëìá óôï sendmail\n"
-" Ç áíáöïńÜ äćí óôÜëèçêć\n"
-" đáńáêáëț ńőèìßóôć ôï sendmail"
+"\n"
+" ćîőđçńćôçôȚò\n"
+"."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Next"
-msgstr "Ćđüìćíï"
+msgid "\tBackups use tar and gzip\n"
+msgstr "\tÁíôßăńáöá Áóöáëćßáò ùò tar êáé gzip\n"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Previous"
-msgstr "Đńïçăïęìćíï"
+msgid "2 MB"
+msgstr "2 MB"
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Save"
-msgstr "ÁđïèȚêćőóç"
+msgid ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build Backup"
-msgstr "Äçìéïőńăßá áíôéăńÜöùí áóöáëćßáò"
+msgid "Setting Default Printer..."
+msgstr "Ïńéóìüò ĐńïćđéëćăìĘíïő ĆêôőđùôȚ..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Restore Progress"
-msgstr "Đńüïäïò ÁíÜêôçóçò"
+msgid "Interface %s (using module %s)"
+msgstr "ÄéćđáöȚ %s (śńȚóç áńèńțìáôïò %s)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Restore From Catalog"
-msgstr "ĆđáíáöïńÜ áđü ÊáôÜëïăï"
+msgid "Name: %s\n"
+msgstr "Œíïìá: %s\n"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Browse to new restore repository."
-msgstr "áíáæȚôçóç íĘï."
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "Generating preview ..."
+msgstr "Äçìéïőńăßá đńïćđéóêüđçóçò ..."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "CD in place - continue."
-msgstr "Ôï CD ćßíáé óôç èĘóç ôïő - óőíĘśćéá"
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Custom Restore"
-msgstr "ĐńïóáńìïóìĘíç ĆđáíáöïńÜ"
+msgid "serial"
+msgstr "óćéńéáêü"
-#: ../../standalone/drakbackup:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Restore all backups"
-msgstr "ĆđáíáöïńÜ üëùí ôùí áíôéăńÜöùí áóöáëćßáò"
+msgid "DVD-ROM"
+msgstr "DVD-ROM"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Failed..."
-msgstr "Ç ĆđáíáöïńÜ ÁđĘôőść..."
+msgid "Georgian (\"Latin\" layout)"
+msgstr "Ăćùńăßá (\"ËáôéíéêȚ\" äéÜôáîç)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Files Restored..."
+msgid "Get the best items with Mandrake Linux Strategic partners"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Path or Module required"
-msgstr "Ç ÈĘóç Ț ôï ¶ńèńùìá áđáéôćßôáé"
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
+msgstr ""
+"Ìđïńćßôć ôțńá íá äțóćôć ôéò đáńáìĘôńïőò ăéá ôï Üńèńùìá %s.\n"
+"Óçìćéțóôć üôé êÜèć äéćęèőíóç đńĘđćé íá ćéóÜăćôáé ìć ôï đńüèćìá 0x üđùò "
+"'0x123'"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Hostname required"
-msgstr "áđáéôćßôáé ôï äéêôőáêü üíïìá"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Username required"
-msgstr "Áđáéôćßôáé üíïìá śńȚóôç"
+msgid "Kenya"
+msgstr "ÊĘíőá"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Password required"
-msgstr "Áđáéôćßôáé êùäéêüò đńüóâáóçò"
+msgid "Use ``Unmount'' first"
+msgstr "ÊÜíôć đńțôá ``Áđïóęíäćóç''"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Host Path or Module"
-msgstr "Óęóôçìá"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Installing mtools packages..."
+msgstr "ĆăêáôÜóôáóç đáêĘôïő mtools..."
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Host Name"
-msgstr "Œíïìá ÓőóôȚìáôïò"
+msgid "You must specify a root partition"
+msgstr "ĐńĘđćé íá ïńßóćôć ìéá êáôÜôìçóç root"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr "ĆđáíáöïńÜ ÌĘóù Đńùôüêïëëï Äéêôęïő: %s"
+msgid "first step creation"
+msgstr "đńțôï âȚìá äçìéïőńăßáò"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Via Network"
-msgstr "ĆđáíáöïńÜ ìĘóù äéêôęïő"
+msgid "Both Shift keys simultaneously"
+msgstr "Ôáőôüśńïíá ôá äęï đëȚêôńá Shift"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr ""
+msgid "Select a scanner model"
+msgstr "ĆđéëĘîôć Ęíá ìïíôĘëï óáńùôȚ"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-"\n"
-" óőóêćőȚ"
+#: ../../printer/data.pm:1
+#, c-format
+msgid "LPRng - LPR New Generation"
+msgstr "LPRng - LPR New Generation"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore From Tape"
-msgstr "ĆđáíáöïńÜ Áđü Ôáéíßá"
+msgid "Drakbackup Configuration"
+msgstr "Ńőèìßóćéò Drakbackup"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr ""
+msgid "Save as.."
+msgstr "ÁđïèȚêćőóç Ùò.."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
msgstr ""
+"Ç äéćđáöȚ äćí Ęśćé ńőèìéóôȚ áêüìá. \n"
+"ĆêôćëĘóôć ôïí ïäçăü ńęèìéóçò óôçí êőńßùò ïèüíç"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore From CD"
-msgstr "ĆđáíáöïńÜ áđü CD"
+msgid "Korea (North)"
+msgstr "ÊïńĘá (Âüńćéá)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup files not found at %s."
-msgstr "Ôá áíôßăńáöá áóöáëćßáò äćí âńĘèçêáí óôï %s."
+msgid "Autologin"
+msgstr "Áőôüìáôç óęíäćóç"
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Change\n"
-"Restore Path"
-msgstr ""
-"ÁëëáăȚ\n"
-"ÈĘóç ĆđáíáöïńÜò"
+msgid "System configuration"
+msgstr "Ńęèìéóç óőóôȚìáôïò"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
+msgid "Domain Admin Password"
+msgstr "Êùäéêüò Đńüóâáóçò ÄéáśćéńéóôȚ ÔïìĘá"
+
+#: ../../share/advertising/05-desktop.pl:1
+#, fuzzy, c-format
msgid ""
-"Restore Selected\n"
-"Files"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
msgstr ""
-"ĆđáíáöïńÜ ĆđéëćăìĘíùí\n"
-"Áńśćßùí"
+"Ôï Mandrake Linux 9.1 óáò đáńĘśćé 11 äéáöïńćôéêÜ ăńáöéêÜ đćńéâÜëëïíôá đïő "
+"ìđïńïęí íá ìćôáôńáđïęí đëȚńùò: KDE 3, Gnome 2, WindowMaker, ..."
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Configuring printer ..."
+msgstr "Ńőèìßæćôáé ï ćêôőđùôȚò ..."
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
msgid ""
-"Restore Selected\n"
-"Catalog Entry"
-msgstr "ĆđáíáöïńÜ\n"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Remove user directories before restore."
-msgstr "Áöáßńćóç êáôáëüăùí śńçóôțí đńéí áđü ôçí ćđáíáöïńÜ."
+msgid "MB"
+msgstr "MB"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Ïëïêëçńțèçêć íĘï"
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, run some checks against the rpm database."
+msgstr "áí ïńéóôćß íáé, Ęëćăśïò ôçò âÜóçò äćäïìĘíùí rpm."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "select path to restore (instead of /)"
-msgstr "ćđéëĘîôć ôç èĘóç ćđáíáöïńÜò (áíôß ôïő /)"
+msgid "Virgin Islands (British)"
+msgstr "ĐáńèĘíïé ÍȚóïé(ÂńćôáíéêĘò)"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore Other"
-msgstr "ĆđáíáöïńÜ ¶ëëùí"
+msgid "Bermuda"
+msgstr "Âćńìïęäćò"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Restore Users"
-msgstr "ĆđáíáöïńÜ Śńçóôțí"
+msgid "click here if you are sure."
+msgstr "êÜíôć êëéê ćäț áí ćßóôć âĘâáéïé"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore system"
-msgstr "ĆđáíáöïńÜ óőóôȚìáôïò"
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
+msgstr ""
+"Äćí âńĘèçêć ńęèìéóç\n"
+"đáńáêáëț êÜíôć êëéê óôï Ïäçăü Ț óôï ĐńïśùńçìĘíï."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"Linux áíéśíćęèçêć\n"
+"\n"
+"\n"
+" Ïëïêëçńțèçêć\n"
+"\n"
+"\n"
+" Linux\n"
+"\n"
+" Œíïìá\n"
+"\n"
+" Œíïìá\n"
+"\n"
+"\n"
+" IDE\n"
+"\n"
+"\n"
+" IDE\n"
+"\n"
+"\n"
+" đńùôćęïőóá IDE\n"
+"\n"
+" đńùôćęïőóá IDE\n"
+"\n"
+" äćőôćńćęïőóá IDE\n"
+"\n"
+" äćőôćńćęïőóá IDE\n"
+"\n"
+"\n"
+"."
+
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Other Media"
-msgstr "¶ëëá ÌĘóá"
+msgid "Remove"
+msgstr "Áöáßńćóçò"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select another media to restore from"
-msgstr "ĆđéëĘîôć Üëëï ìĘóï ăéá ôçí áíÜêôçóç"
+msgid "Lesotho"
+msgstr "Ëćóüôï"
-#: ../../standalone/drakbackup:1
+#: ../../ugtk2.pm:1
#, c-format
-msgid "Please enter the directory where backups are stored"
-msgstr "Đáńáêáëț ćéóÜăćôć ôïí êáôÜëïăï đïő âńßóêïíôáé ôá áíôßăńáöá áóöáëćßáò"
+msgid "utopia 25"
+msgstr "utopia 25"
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Restore from Hard Disk."
-msgstr "ĆđáíáöïńÜ áđü ôïí óêëçńü äßóêï."
+msgid "Pipe job into a command"
+msgstr "ÄéáóùëȚíùóç ćńăáóßáò óć ćíôïëȚ"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Use quota for backup files."
-msgstr ""
+msgid "new dynamic device name generated by core kernel devfs"
+msgstr "äçìéïőńăȚèçêć íĘá äőíáìéêȚ óőóêćőȚ áđü ôïí êćíôńéêü đőńȚíá devfs"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Đáńáêáëț ćđéëĘîôć ôï ìĘăéóôï ìĘăćèïò\n"
-"đïő ćđéôńĘđćôáé óôï Drakbackup"
+msgid "Yes"
+msgstr "Íáé"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the directory to save:"
-msgstr "Đáńáêáëț ïńßóôć ôïí êáôÜëïăï áđïèȚêćőóçò: "
+msgid "Cote d'Ivoire"
+msgstr "ÁêôȚ Ćëćöáíôïóôïę"
-#: ../../standalone/drakbackup:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Use Hard Disk to backup"
-msgstr "ŚńȚóç óêëçńïę äßóêïő ăéá ôá áíôßăńáöá áóöáëćßáò"
+msgid "Which protocol do you want to use?"
+msgstr "Đïéï đńùôüêïëëï èĘëćôć íá śńçóéìïđïéȚóćôć;"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "please choose the date to restore"
-msgstr "Đáńáêáëț ćđéëĘîôć ôçí çìćńïìçíßá ćđáíáöïńÜò"
+msgid "Restore Progress"
+msgstr "Đńüïäïò ÁíÜêôçóçò"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Backup the system files before:"
-msgstr "Áíôßăńáöá áóöáëćßáò áńśćßùí óőóôȚìáôïò đńéí áđü:"
+msgid "Estonia"
+msgstr "Ćóèïíßá"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr "śńȚóôçò"
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Choose the host on which the local scanners should be made available:"
+msgstr ""
+"ĆđéëĘîôć ôïí őđïëïăéóôȚ ôïő ïđïßïő ïé ôïđéêïß óáńùôĘò èá ăßíïőí äéáèĘóéìïé:"
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "OK to restore the other files."
-msgstr "ĆíôÜîćé ăéá ôçí ćđáíáöïńÜ ôùí Üëëùí áńśćßùí."
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
+msgstr ""
+"ŐđÜńśćé Ęíá êćíü óôïí đßíáêá êáôáôìȚóćùí ìá äćí ìđïńț íá ôï śńçóéìïđïéȚóù.\n"
+"Ç ìïíáäéêȚ ëęóç ćßíáé íá ìćôáêéíȚóćôć ôéò đńùôćęïőóćò êáôáôìȚóćéò óáò Ęôóé "
+"țóôć ôï êćíü íá âńćèćß äßđëá óôçí ćêôćôáìĘíç êáôÜôìçóç"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " Restore Configuration "
-msgstr " Ńőèìßóćéò ĆđáíáöïńÜò "
+msgid "Channel"
+msgstr "ÊáíÜëé"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid " Successfuly Restored on %s "
-msgstr " Áíáêôçèćß ìć ćđéôőśßá óôï %s "
+msgid "Add"
+msgstr "ĐńïóèȚêç"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid " All of your selected data have been "
-msgstr " Œëá ôá ćđéëćăìĘíá äćäïìĘíá Ęśïőí "
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "Ç ÊïéíȚ Óęíäćóç Äéáäéêôęïő äćí Ęśćé ńőèìéóôćß đïôĘ."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup files are corrupted"
-msgstr "Ôá áíôßăńáöá áóöáëćßáò ćßíáé êáôćóôńáììĘíá"
+msgid " Error while sending mail. \n"
+msgstr "ÓöÜëìá êáôÜ ôçí áđïóôïëȚ ìçíęìáôïò. \n"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Đáńáêáëț áöáéńĘóôć ôï ôçí ćđüìćíç öïńÜ."
+msgid "Keyboard"
+msgstr "Đëçêôńïëüăéï"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"List of data corrupted:\n"
-"\n"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-"Ëßóôá ôùí êáôćóôńáììĘíùí äćäïìĘíùí:\n"
-"\n"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"List of data to restore:\n"
-"\n"
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
msgstr ""
-"Ëßóôá ôùí äćäïìĘíùí đńïò ćđáíáöïńÜ:\n"
-"\n"
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Êáìßá ńęèìéóç, êÜíôć êëéê óôïí Ïäçăü Ț óôï ĐńïśùńçìĘíá.\n"
+msgid "Choose the connection you want to configure"
+msgstr "ĆđéëĘîôć ôç óęíäćóç đïő èĘëćôć íá ńőèìßóćôć"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "\t-Network by webdav.\n"
-msgstr "\t-Äßêôőï ìĘóù webdav.\n"
+msgid "Please wait, setting security level..."
+msgstr "Đáńáêáëț đćńéìĘíćôć, ńőèìßæćôáé ôï ćđßđćäï áóöáëćßáò..."
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t-Äßêôőï ìĘóù rsync.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
+msgstr "Ôï Mandrake Linux 9.1 ćßíáé ç őđĘńôáôç đëáôöüńìá áíÜđôőîçò"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Äßêôőï ìĘóù SSH.\n"
+msgid "Configuring network device %s"
+msgstr "Ńęèìéóç óőóêćőȚò äéêôęïő %s"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Äßêôőï ìĘóù FTP.\n"
+msgid "activated"
+msgstr "ćíćńăïđïéçìĘíï"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "\t-Tape \n"
-msgstr "\t-Ôáéíßá \n"
+msgid "Please choose which network interface will be used for the dhcp server."
+msgstr ""
+"Đáńáêáëț ćđéëĘîôć đïéá äéćđáöȚ äéêôęïő èá śńçóéìïđïéȚóćôć ăéá ôïí "
+"ćîőđçńćôçôȚ dhcp."
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
+msgid "Finding packages to upgrade..."
+msgstr "ÁíáæȚôçóç đáêĘôùí đńïò áíáâÜèìéóç..."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t-Óêëçńüò Äßóêïò.\n"
+msgid "Mount point: "
+msgstr "Óçìćßï óęíäćóçò: "
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
-msgstr ""
-"\n"
-"- Äáßìïíáò (%s) ìáæß ìć :\n"
+msgid "parse all fonts"
+msgstr "áíÜëőóç üëùí ôùí ăńáììáôïóćéńțí"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tÁíôßăńáöá Áóöáëćßáò ùò tar êáé gzip\n"
+msgid "With X"
+msgstr "Ìć Ś"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tÁíôßăńáöá Áóöáëćßáò ùò tar êáé bzip2\n"
+msgid "Multi-head configuration"
+msgstr "Ńęèìéóç đïëëțí êćöáëțí"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "\tDo not include System Files\n"
-msgstr "\tŚùńßò ôï Áńśćßï ÓőóôȚìáôïò\n"
+msgid "No browser available! Please install one"
+msgstr "Äćí âńĘèçêć đćńéçăçôȚò! Đáńáêáëț ćăêáôáóôȚóôć ôïí"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
"\n"
-"- Options:\n"
+"%s"
msgstr ""
+"ÄéáôȚńçóç őđáńśüíôùí ńőèìßóćùí;\n"
+"Ïé ôńĘśïőóćò ńőèìßóćéò ćßíáé:\n"
"\n"
-"- ĆđéëïăĘò:\n"
+"%s"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
msgstr ""
-"\t\t üíïìá śńȚóôç: %s\n"
-"\t\t óôç èĘóç: %s \n"
+"Äćí ìđïńćßôć íá śńçóéìïđïéȚóćôć ôï ReiserFS ăéá êáôáôìȚóćéò ìéêńüôćńćò áđü "
+"32MB"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"- Save via %s on host: %s\n"
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
-"\n"
-" ÁđïèȚêćőóç ìĘóù %s óôïí őđïëïăéóôȚ: %s\n"
+"Ôï đńùôüêïëëï rwho ćđéôńĘđćé óć áđïìáêńőóìĘíïőò śńȚóôćò íá äïőí Ęíáí \n"
+"êáôÜëïăï ôùí śńçóôțí ôïő óőóôȚìáôïò (đáńüìïéï ìć ôï finger)."
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "\t\tErase=%s"
-msgstr "\t\tÓâȚóéìï=%s"
+msgid "Domain name"
+msgstr "Œíïìá ÔïìĘá"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-"\n"
-" ÁđïèȚêćőóç óć Ôáéíßá óôç óőóêćőȚ: %s"
+msgid "Sharing of local printers"
+msgstr "ÊïéíȚ śńȚóç ôïđéêțí ćêôőđùôțí"
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
#, c-format
-msgid " (multi-session)"
-msgstr ""
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgstr "http://www.mandrakelinux.com/en/91errata.php3"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on device: %s"
-msgstr "Óôç ÓőóêćőȚ : %s"
+msgid "Available printers"
+msgstr "ÄéáèĘóéìïé ćêôőđùôȚò"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "RW"
-msgstr "RW"
+msgid "Empty"
+msgstr "¶äćéï"
-#: ../../standalone/drakbackup:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
-"- Burn to CD"
-msgstr ""
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
"\n"
-"- ĆăăńáöȚ óć CD"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
"\n"
-"- ÄéáăńáöȚ áńśćßùí tar áđü ôïí äßóêï ìćôÜ ôï áíôßăńáöï áóöáëćßáò.\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
"\n"
-"- ÁđïèȚêćőóç óôïí óêëçńü äßóêï óôçí èĘóç: %s\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+"Monitor\n"
"\n"
-"- Other Files:\n"
-msgstr ""
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
"\n"
-"- ¶ëëá Áńśćßá:\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- User Files:\n"
+"\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
+"Óęóôçìá Linux\n"
"\n"
-"- Áńśćßá Śńçóôțí:\n"
+" Linux\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" ćîőđçńćôçôȚò\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" Ïèüíç\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" ÁíÜëőóç\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" ÄïêéìȚ\n"
+"\n"
+"\n"
+" Íáé\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" ĆđéëïăĘò\n"
+"\n"
+"\n"
+"\n"
+" Œśé ćîőđçńćôçôȚò\n"
+"."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "text width"
+msgstr "đëÜôïò êćéìĘíïő"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount device %s?"
+msgstr "Đïę èĘëćôć íá óőíäĘóćôć ôçí óőóêćőȚ %s;"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The default lease (in seconds)"
+msgstr "Ç đńïêáèïńéóìĘíç ìßóèùóç (óć äćőôćńüëćđôá)"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Interface \"%s\""
+msgstr "ÄéćđáöȚ \"%s\""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "With basic documentation (recommended!)"
+msgstr "Ìć ôçí âáóéêȚ ôćêìçńßùóç (óőíéóôÜôáé!)"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "1 button"
+msgstr "1 đëȚêôńïő"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"- System Files:\n"
+"There are %d unknown printers directly connected to your system"
msgstr ""
"\n"
-"- Áńśćßá ÓőóôȚìáôïò:\n"
+"Ćßíáé %d ćêôőđùôĘò óőíäćìĘíïé áđćőèćßáò óôï óęóôçìÜ óáò"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
+#, c-format
+msgid "Test"
+msgstr "ÄïêéìȚ"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"Backup Sources: \n"
+"Allow/Forbid direct root login."
msgstr ""
-"\n"
-"- ĐçăĘò ÁíôéăńÜöùí Áóöáëćßáò:\n"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select user manually"
-msgstr "ĆđéëïăȚ śńȚóôç śćéńïêßíçôá"
+msgid "Korea"
+msgstr "ÊïńĘá"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Backup Users"
-msgstr "Áíôßăńáöï Áóöáëćßáò Śńçóôțí"
+msgid "Your choice? (default `%s'%s) "
+msgstr "Ç ćđéëïăȚ óáò; (ćî ïńéóìïę `%s'%s) "
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Backup system"
-msgstr "Áíôßăńáöï Áóöáëćßáò ÓőóôȚìáôïò"
+msgid "Raw printer"
+msgstr "ÁêáôĘńăáóôïò ćêôőđùôȚò"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "Đáńáêáëț ćđéëĘîôć ôé èĘëćôć íá đÜńćôć óć áíôßăńáöá áóöáëćßáò"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "official vendor name of the cpu"
+msgstr "Ôï ćđßóçìï üíïìá êáôáóêćőáóôȚ ôïő ćđćîćńăáóôȚ"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "on Tape Device"
-msgstr "óôç ÓőóêćőȚ Ôáéíßáò"
+msgid "Vendor"
+msgstr "ÊáôáóêćőáóôȚò"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "on CDROM"
-msgstr "óôï CDROM"
+msgid "Interface %s"
+msgstr "ÄéćđáöȚ %s"
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "across Network"
-msgstr "óôï Äßêôőï"
+msgid "Configure mouse"
+msgstr "Ńęèìéóç đïíôéêéïę"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "on Hard Drive"
-msgstr "óôïí Óêëçńü Äßóêï"
+msgid "Choose the mount points"
+msgstr "ĆđéëĘîôć óçìćßá óęíäćóçò"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Please choose where you want to backup"
-msgstr "Đáńáêáëț ćđéëĘîôć ôçí èĘóç ôùí áíôéăńÜöùí áóöáëćßáò"
+msgid "OK"
+msgstr "ĆíôÜîćé"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "More Options"
-msgstr "Đćńéóóüôćńćò ĆđéëïăĘò"
+msgid "Yugoslavian (latin)"
+msgstr "Ăéïőăêïóëáâéêü (ëáôéíéêü)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "When"
-msgstr "Đüôć"
+msgid "Installing"
+msgstr "ĆăêáôÜóôáóç"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Where"
-msgstr "Đïő"
+msgid "Launch userdrake"
+msgstr "Ćêêßíçóç userdrake"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "What"
-msgstr "Ôé"
+msgid "Is this an install or an upgrade?"
+msgstr "Đńüêćéôáé ăéá ćăêáôÜóôáóç Ț ăéá áíáâÜèìéóç;"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr "ÄéáăńáöȚ ôùí áńśćßùí tar áđü ôï äßóêï ìćôÜ ôç ìćôáöïńÜ óć Üëëï ìĘóï."
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "ISDN card"
+msgstr "ĆóùôćńéêȚ êÜńôá ISDN"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
+#, fuzzy, c-format
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
+msgstr "Linux"
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Send mail report after each backup to:"
+msgid ""
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
+"\n"
msgstr ""
-"ÁđïóôïëȚ çëćêôńïíéêïę ìçíęìáôïò ìćôÜ áđü êÜèć ëȚűç áíôéăńÜöùí áóöáëćßáò óôï:"
+"ÓőăśáńçôȚńéá, ç ńęèìéóç äéêôęïő êáé äéáäéêôęïő ôćëćßùóć.\n"
+"Ïé ńőèìßóćéò èá ćöáńìïóôïęí ôțńá óôï óęóôçìÜ óáò.\n"
+"\n"
#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t-Hard drive.\n"
+msgstr "\t-Óêëçńüò Äßóêïò.\n"
+
+#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
"\n"
-"Note that currently all 'net' medias also use the hard drive."
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
+"ćíćńăïđïßçóç ôțńá Linux\n"
"\n"
"\n"
-" Óçìćßùóç."
+" íĘï\n"
+" Linux\n"
+"\n"
+" ĆăêáôÜóôáóç\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" ÁíáâÜèìéóç\n"
+" Linux\n"
+" śńȚóôçò\n"
+"\n"
+"\n"
+" ÁíáâÜèìéóç Linux\n"
+" ćêôćëćßôáé ÁíáâÜèìéóç\n"
+" Linux."
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Đáńáêáëț ćđéëĘîôć ôï \n"
-"ìĘóï ăéá ôá áíôßăńáöá \n"
-"áóöáëćßáò"
+msgid "Printer on remote CUPS server"
+msgstr "ÁđïìáêńőóìĘíïò ćêôőđùôȚò óć ćîőđçńćôçôȚ CUPS"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the time \n"
-"interval between each backup"
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
msgstr ""
-"Đáńáêáëț ćđéëĘîôć ôï \n"
-"äéÜóôçìá ìćôáîę ôïő êÜèć\n"
-"áíôßăńáöïő áóöáëćßáò"
+"ÁđĘôőść ç áöáßńćóç ôïő ćêôőđùôȚ \"%s\" áđü ôï Star Office/OpenOffice.org/GIMP"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Use daemon"
-msgstr "ŚńȚóç äáßìïíá"
+msgid "delete"
+msgstr "äéáăńáöȚ"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "monthly"
-msgstr "ìçíéáßá"
+msgid "here if no."
+msgstr "ćäț áí üśé."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "DHCP host name"
+msgstr "Œíïìá óőóôȚìáôïò"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid "weekly"
-msgstr "ćâäïìáäéáßá"
+msgid "The maximum lease (in seconds)"
+msgstr "Ç ìĘăéóôç ìßóèùóç (óć äćőôćńüëćđôá)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "daily"
-msgstr "êáèçìćńéíÜ"
+msgid "Please choose which serial port your mouse is connected to."
+msgstr ""
+"Đáńáêáëț ćđéëĘîôć óćéńéáêȚ èęńá óôçí ïđïßá ćßíáé óőíäćäćìĘíï ôï đïíôßêé óáò."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "hourly"
-msgstr "ùńéáßá"
+msgid "Did it work properly?"
+msgstr "Ëćéôïęńăçóć óùóôÜ;"
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
#, c-format
-msgid "HardDrive / NFS"
-msgstr "Óêëçńüò Äßóêïò / NFS"
+msgid "Poor"
+msgstr "Öôùśü"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
+msgid "The DHCP start range"
+msgstr "To üńéï ćêêßíçóçò DHCP"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the directory to save to:"
-msgstr "Đáńáêáëț ïńßóôć ôïí êáôÜëïăï áđïèȚêćőóçò: "
+msgid "Grenada"
+msgstr "ĂńćíÜäá"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr ""
+msgid "Unsafe"
+msgstr "ÁíáóöáëĘò"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr ""
+msgid ", %s sectors"
+msgstr ", %s ôïìćßò"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "óőóêćőȚ."
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "No"
+msgstr "Œśé"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please enter the device name to use for backup"
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
msgstr ""
-"Đáńáêáëț ćéóÜăćôáé ôï üíïìá óőóêćőȚò ăéá ôç śńȚóç ôùí áíôéăńÜöùí áóöáëćßáò"
+"Ćßíáé ï ćêôőđùôȚò óáò ìéá đïëőśńçóôéêȚ óőóêćőȚ áđü ôçí HP Ț ôçí Sony "
+"(OfficeJet, PSC, LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-"
+"V100), an HP PhotoSmart or an HP LaserJet 2200;"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use tape to backup"
-msgstr "ŚńȚóç ôáéíßáò ăéá ôá áńśćßá áóöáëćßáò"
+msgid "Guadeloupe"
+msgstr "Ăïőáäćëïęđç"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "No CD device defined!"
-msgstr "Äćí êáèïńßóôçêć óőóêćőȚ CD"
+msgid "could not find any font.\n"
+msgstr "äćí âńĘèçêć êáìßá ăńáììáôïóćéńÜ\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Đáńáêáëț ćéóÜăćôć ôï üíïìá ôçò óőóêćőȚò ćăăńáöȚò CD\n"
-"đ.ś. : 0,1,0"
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "ÈĘëćôć ôï BackSpace íá ćđéóôńĘöćé Delete óôçí êïíóüëá;"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "Đáńáêáëț ïńßóôć áí êÜíćôć śńȚóç óőóêćőȚò DVDRAM"
+msgid "Vertical refresh rate"
+msgstr "Óőśíüôçôá êáôáêüńőöçò áíáíĘùóçò"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
#, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "Đáńáêáëț ïńßóôć áí êÜíćôć śńȚóç óőóêćőȚò DVDR"
+msgid "Entering step `%s'\n"
+msgstr "ÂȚìá `%s'\n"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid " Erase Now "
-msgstr "ÓâȚóéìï Ôțńá "
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "RW"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Removing %s ..."
+msgstr "Áöáéńćßôáé ï %s..."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "Đáńáêáëț ïńßóôć áí êÜíćôć śńȚóç óőóêćőȚò CDRW"
+msgid "Niger"
+msgstr "Íßăçńáò"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Please check for multisession CD"
-msgstr ""
+msgid "No printer"
+msgstr "ÊáíĘíáò ćêôőđùôȚò"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "Đáńáêáëț ïńßóôć ôïí śțńï ôïő CD/DVD "
+msgid "alert configuration"
+msgstr "Ńęèìéóç ćéäïđïéȚóćùí"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
-msgstr ""
-"óőóêćőȚ\n"
-"\n"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "NetWare Printer Options"
+msgstr "ĆđéëïăĘò ĆêôőđùôȚ NetWare"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Use CD/DVDROM to backup"
-msgstr "ŚńȚóç CD/DVDROM ăéá ôá áńśćßá áóöáëćßáò"
+msgid "%s BootSplash (%s) preview"
+msgstr "%s Đńïćđéóêüđçóç (%s)Bootsplash"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Need hostname, username and password!"
-msgstr "ŚńćéÜæćôáé ôï äéêôőáêü üíïìá, üíïìá śńȚóôç êáé êùäéêü đńüóâáóçò!"
+msgid "General"
+msgstr "ĂćíéêÜ"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remember this password"
-msgstr "Áđïìíçìüíćőóç ôïő êùäéêïę đńüóâáóçò"
+msgid "Printing system: "
+msgstr "Óęóôçìá ćêôęđùóçò: "
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please enter your password"
-msgstr "Đáńáêáëț ćéóÜăćôć ôïí êùäéêü đńüóâáóçò"
+msgid "Add a user"
+msgstr "ĐńïóèȚêç śńȚóôç"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please enter your login"
-msgstr "Đáńáêáëț ćéóÜăćôć ôï üíïìá śńȚóôç"
+msgid "Network configuration (%d adapters)"
+msgstr "Ńęèìéóç äéêôęïő (%d đńïóáńìïăćßò)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#, c-format
+msgid "Mandatory package %s is missing"
+msgstr "žíá áđáńáßôçôï áńśćßï (ôï %s ) äćí őđÜńśćé"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Philippines"
+msgstr "Öéëéđđßíćò"
+
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#, c-format
+msgid "Ok"
+msgstr "ĆíôÜîćé"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Print Queue Name"
+msgstr "Œíïìá ÏőńÜò ĆêôőđùôȚ"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "ÈĘëćôć íá śńçóéìïđïéȚóćôć ôï aboot;"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "Ëćőêïńùóßáò"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
msgstr ""
+"Ôï PDQ őđïóôçńßæćé ìüíï ôïđéêïęò ćêôőđùôĘò, ÁđïìáêńőóìĘíïò ćêôőđùôĘò LPD êáé "
+"ćêôőđùôĘò Sockete/TCP.\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please enter the host name or IP."
-msgstr "Đáńáêáëț ïńßóôć ôïí äéêôőáêü üíïìá Ț ôçí IP"
+msgid "Move files to the new partition"
+msgstr "Ìćôáêßíçóç áńśćßùí óôçí íĘá êáôÜôìçóç"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
-msgstr "¶ëëï\n"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
+msgstr "ĐńïóèȚêç CUPS."
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-" Transfer \n"
-"Now"
-msgstr ""
-" ÌćôáöïńÜ \n"
-"Ôțńá"
+msgid "Restore From Catalog"
+msgstr "ĆđáíáöïńÜ áđü ÊáôÜëïăï"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
-msgstr ""
-"Äçìéïőńăßá/ÌćôáöïńÜ\n"
-"áíôéăńÜöùí áóöáëćßáò ôùí êëćéäéțí SSH"
+msgid "Pitcairn"
+msgstr "ÍȚóïé Đßôêáéńí"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use Expect for SSH"
-msgstr ""
+msgid "IDE"
+msgstr "IDE"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Net Method:"
-msgstr "ÌĘèïäïò äéêôęïő:"
+msgid "group :"
+msgstr "ïìÜäá :"
-#: ../../standalone/drakbackup:1
+#: ../../fs.pm:1
#, c-format
-msgid "Use network connection to backup"
-msgstr "ŚńȚóç óęíäćóç äéêôęïő ăéá ôá áńśćßá áóöáëćßáò"
+msgid "mounting partition %s in directory %s failed"
+msgstr "ç óęíäćóç ôçò êáôÜôìçóçò %s óôïí êáôÜëïăï %s áđĘôőść"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Users"
-msgstr "ŚńȚóôćò"
+msgid "Lilo screen"
+msgstr "Ïèüíç Lilo"
-#: ../../standalone/drakbackup:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
+msgid "LILO with graphical menu"
+msgstr "LILO ìć ăńáöéêü ìćíïę"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr ""
+msgid "Estimating"
+msgstr "Ćêôßìçóç"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Remove Selected"
-msgstr "Áöáßńćóç ĆđéëćăìĘíùí"
+msgid "You can't unselect this package. It is already installed"
+msgstr "Äćí ìđïńćßôć íá áđïćđéëĘîćôć áőôü ôï đáêĘôï. Ćßíáé Țäç ćăêáôćóôçìĘíï"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do not include the browser cache"
-msgstr "Śùńßò ôçí cache ôïő đćńéçăçôȚ"
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "ĆêôőđùôȚò \"%s\" óć ćîőđçńćôçôȚ SMB/Windows \"%s\""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr ""
-"Đáńáêáëț ćđéëĘîôć üóïőò śńȚóôćò èĘëćôć íá őđÜńśïőí óôá áíôßăńáöá áóöáëćßáò"
+msgid "Go on anyway?"
+msgstr "Íá óőíćśßóù;"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Ìć áőôȚ ôçí ćđéëïăȚ èá ìđïńćßôć íá ćđáíáöĘńćôć ïđïéáäȚđïôć\n"
-"Ęêäïóç ôïő êáôáëüăïő /etc."
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "ŰÜśíù ăéá äéáèĘóéìá đáêĘôá êáé äçìéïőńăț îáíÜ ôç âÜóç äćäïìĘíùí rpm..."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Śùńßò ôá êńßóéìá áńśćßá ( êùäéêïß, ïìÜäćò, fstab)"
+msgid "Does not appear to be recordable media!"
+msgstr "Öáßíćôáé íá ìçí ćßíáé ćăăńÜűéìï ìĘóï!"
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Use incremental backup (do not replace old backups)"
-msgstr ""
+msgid "Specify options"
+msgstr "Đńïóäéïńéóìüò đáńáìĘôńùí"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Áíôßăńáöï áóöáëćßáò ôùí áńśćßùí ÓőóôȚìáôïò (êáôÜëïăïò /etc )"
+msgid "Vanuatu"
+msgstr "ÂáíïőÜôïő"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"ÁőôĘò ïé ćđéëïăĘò ìđïńïęí íá đÜńïőí áíôßăńáöá áóöáëćßáò êáé íá ćđáíáöĘńïőí "
-"ôï /etc\n"
+msgid "Either the server name or the server's IP must be given!"
+msgstr "Ćßôć ôï üíïìá ôïő ćîőđçńćôçôȚ Ț ç IP ôïő đńĘđćé íá äïèïęí!"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
"\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
msgstr ""
+"Ìéá đńïóáńìïóìĘíç äéóêĘôá ćêêßíçóçò óáò äßíćé ôçí äőíáôüôçôá íá ćêêéíȚóćôć\n"
+"ôï óęóôçìÜ óáò śùńßò ôçí śńȚóç ôïő đńïăńÜììáôïò ćêêßíçóçò. Áőôü ćßíáé "
+"śńȚóéìï ćÜí äćí èĘëćôć\n"
+"íá ćăêáôáóôȚóćôć ôï SILO , Ț ćÜí êÜđïéï Üëëï ëćéôïőńăéêü êáôáóôńĘűćé ôï "
+"SILOȚ ćÜí ïé \n"
+"ńőèìßóćéò óáò äćí ćđéôńĘđïőí ôç śńȚóç SILO. ÁőôȚ ç äéóêĘôá ìđïńćß ćđßóçò íá "
+"śńçóéìïđïéçèćß óć\n"
+" óőíäőáóìü ìć ôçí äéóêĘôá äéÜóùóçò ôïő Mandrake, êÜíïíôáò ćőêïëüôćńç ôçí "
+"ćđáíáöïńÜ ôïő óőóôȚìáôïò ìćôÜ áđü óïâáńȚ âëÜâç.\n"
"\n"
-"Đáńáêáëț ćđéëĘîôć üëćò ôéò ćđéëïăĘò đïő śńćéÜæćóôć.\n"
+"Áí èĘëćôć íá äçìéïőńăȚóćôć ìéá ôĘôïéá äéóêĘôá ćéóÜăćôć ìéá êćíȚ äéóêĘôá óôïí "
+"ïäçăü\n"
+"äéóêĘôáò êáé đáôȚóôć \"ĆíôÜîćé\"."
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Select the files or directories and click on 'Add'"
+msgid "You can't use an encrypted file system for mount point %s"
msgstr ""
-"Đáńáêáëț ćđéëĘîôć ôá áńśćßá Ț ôïőò êáôáëüăïőò êáé êÜíôć êëéê óôï 'đńïóèȚêç'"
+"Äćí ìđïńćßôć íá śńçóéìïđïéȚóćôć êńőđôïăńáöçìĘíï óęóôçìá áńśćßùí ăéá "
+"đńïóÜńôçóç %s"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "File Selection"
-msgstr "ĆđéëïăȚ Áńśćßïő"
+msgid "Norfolk Island"
+msgstr "ÍȚóïé Íüńöïëê"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Can't create catalog!"
-msgstr "Áäęíáôç ç äçìéïőńăßá êáôáëüăïő!"
+msgid "Theme installation failed!"
+msgstr "Ç ćăêáôÜóôáóç èĘìáôïò áđĘôőść!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid " Error while sending mail. \n"
-msgstr "ÓöÜëìá êáôÜ ôçí áđïóôïëȚ ìçíęìáôïò. \n"
+msgid "Nothing to do"
+msgstr "Êáìßá ćíĘńăćéá đńïò ćêôĘëćóç"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
-"\n"
-"Äńáóôçńéüôçôćò Drakbackup ìĘóù ôáéíßáò:\n"
-"\n"
+msgid "Use for loopback"
+msgstr "ŚńȚóç ăéá loopback"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
-"\n"
-"Äńáóôçńéüôçôćò Drakbackup ìĘóù CD:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
+msgstr "Ćńăáëćßï ÁíáöïńÜò ÓöáëìÜôùí Mandrake"
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
-"\n"
-"Äńáóôçńéüôçôćò Drakbackup ìĘóù %s:\n"
-"\n"
+msgid "use pppoe"
+msgstr "śńȚóç pppoe"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-" ÓöÜëìá óôç óęíäćóç FTP . Äćí Țôáí äőíáôȚ ç áđïóôïëȚ ôùí áíôéăńÜöùí "
-"áóöáëćßáò ìĘóù FTP.\n"
+msgid "Moving files to the new partition"
+msgstr "Ìćôáêßíçóç áńśćßùí óôçí íĘá êáôÜôìçóç"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"file list sent by FTP: %s\n"
-" "
-msgstr ""
-"áđïóôïëȚ ëßóôáò áńśćßùí ìĘóù FTP: %s\n"
-" "
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s ìć ĐĆÉŃÁÌÁÔÉÊÇ ćđéôÜśőíóç ôńéóäéÜóôáôùí ăńáöéêțí"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1
#, c-format
-msgid "No changes to backup!"
-msgstr "Äćí őđÜńśïőí áëëáăĘò ăéá íá ăßíïőí áíôßăńáöá áóöáëćßáò!"
+msgid "Advanced"
+msgstr "Ăéá ĐńïśùńçìĘíïőò"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Áíôßăńáöá Áóöáëćßáò Óêëçńïę Äßóêïő"
+msgid "Transfer"
+msgstr "ÌćôáöïńÜ"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup Other files..."
-msgstr "Áíôßăńáöï Áóöáëćßáò ¶ëëùí áńśćßùí..."
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak (Óïőçäéêü)"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "Äéáäéêáóßá ÁíôéăńÜöùí áóöáëćßáò óôïí Óêëçńü Äßóêï..."
+msgid "More Options"
+msgstr "Đćńéóóüôćńćò ĆđéëïăĘò"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Backup User files..."
-msgstr "Áíôßăńáöï Áóöáëćßáò ôùí áńśćßùí Śńçóôțí..."
+msgid "Afghanistan"
+msgstr "ÁöăáíéóôÜí"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup system files..."
-msgstr "Áíôßăńáöï Áóöáëćßáò óőóôȚìáôïò áńśćßùí..."
+msgid "Delete Hard Drive tar files after backup to other media."
+msgstr "ÄéáăńáöȚ ôùí áńśćßùí tar áđü ôï äßóêï ìćôÜ ôç ìćôáöïńÜ óć Üëëï ìĘóï."
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "No tape in %s!"
-msgstr "ÊáìéÜ ôáéíßá óôï %s!"
+msgid ""
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
+msgstr ""
+"Ôï cron ćßíáé ìéá âáóéêȚ őđçńćóßá UNIX đïő ôńĘśćé ćíôïëĘò êáèïńéóìĘíćò áđü \n"
+"ôïí śńȚóôç óć ôáêôÜ śńïíéêÜ äéáóôȚìáôá. Ôï vixie cron đńïóèĘôćé Ęíáí "
+"áńéèìü \n"
+"ćđéđëĘïí äőíáôïôȚôùí đïő đćńéëáìâÜíïőí êáëęôćńç áóöÜëćéá êáé đéï éóśőńĘò "
+"ńőèìßóćéò."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Permission problem accessing CD."
-msgstr "Đńüâëçìá äéêáéùìÜôùí óôçí đńüóâáóç ôïő CD."
+msgid "Burundi"
+msgstr "Ìđïőńïęíôé"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "This may take a moment to erase the media."
-msgstr "șóùò śńćéáóôïęí ìćńéêÜ ëćđôÜ ăéá íá óâçóôćß ôï ìĘóï."
+msgid "Add Client -->"
+msgstr "ĐńïóèȚêç ĐćëÜôç -->"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Not erasable media!"
-msgstr "Ôï ìĘóï äćí ìđïńćß íá óâçóôćß!"
+msgid "Read carefully!"
+msgstr "ÄéáâÜóôć đńïóćêôéêÜ!"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr "Öáßíćôáé íá ìçí ćßíáé ćăăńÜűéìï ìĘóï!"
+msgid "RW"
+msgstr "RW"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "No CDR/DVDR in drive!"
-msgstr "Äćí őđÜńśćé CDR/DVDR óôïí ïäçăü!"
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "WebDAV transfer failed!"
-msgstr "Ç ìćôáöïńÜ WebDAV áđĘôőść!"
+msgid "Port"
+msgstr "Èęńá"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "WebDAV remote site already in sync!"
-msgstr "Ôï áđïìáêńőóìĘíï WebDAV ćßíáé Țäç óć óőăśńïíéóìü!"
+msgid "No (experts only)"
+msgstr "Œśé (ìüíï ăéá ćéäéêïęò)"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Total progess"
-msgstr "ÓőíïëéêȚ đńüïäïò"
+msgid "No kernel selected!"
+msgstr "Äćí ćđéëĘśôçêć đőńȚíáò!"
+
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
+#, c-format
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Press enter to boot the selected OS, 'e' to edit the"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Set-GID"
+msgstr "Ïńéóìüò GID"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "The encryption keys do not match"
+msgstr "Ôá êëćéäéÜ êńőđôïăńÜöçóçò ćßíáé áíüìïéá"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Right \"Windows\" key"
+msgstr "Äćîéü đëȚêôńï \"Windows\""
#: ../../standalone/drakbackup:1
#, c-format
+msgid "CDROM / DVDROM"
+msgstr "CDROM / DVDROM"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check empty password in /etc/shadow."
+msgstr "áí ïńéóôćß íáé, Ęëćăśïò êćíțí êùäéêțí đńüóâáóçò óôï /etc/shadow."
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
+msgstr ""
"\n"
-"ssh -i %s %s\\@%s\n"
+" Linux\n"
+" ÁđïäïśȚ\n"
+"."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Here is a list of the available printing options for the current printer:\n"
"\n"
-"without being prompted for a password."
msgstr ""
-"ĆđéôőśȚò ìćôáöïńÜ\n"
-"șóùò íá śńćéáóôćß íá ćđáëçèćęóćôć üôé ìđïńćßôć íá đńïóđćëÜóćôć ôïí "
-"äéáêïìéóôȚ ìć:\n"
+"ÁőôȚ ćßíáé ìéá ëßóôá ìć ôéò äéáèĘóéìćò ćđéëïăĘò ćêôęđùóçò ăéá ôïí ôńĘśïí "
+"ćêôőđùôȚ:\n"
"\n"
-"ssh -i %s %s\\@%s\n"
+
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolutions"
+msgstr "Áíáëęóćéò"
+
+#: ../../network/drakfirewall.pm:1
+#, c-format
+msgid ""
+"drakfirewall configurator\n"
"\n"
-"śùńßò íá æçôçèćß êùäéêüò đńüóâáóçò."
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
+msgstr ""
+"ńęèìéóç tinyfirewall\n"
+"\n"
+"Áőôü ńőèìßæćé ôï đńïóùđéêü óáò firewall ăéá áőôü ôï ìçśÜíçìá Mandrake "
+"Linux.\n"
+"Ăéá ìéá éóśőńȚ áöïóéùìĘíç ëęóç firewall, đáńáêáëț êïéôÜîôć óôçí\n"
+"ćéäéêćőìĘíç MandrakeSecurity Firewall äéáíïìȚ."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "%s not responding"
-msgstr "ôï %s äćí áíôáđïêńßíćôáé"
+msgid ""
+"Please enter your username, password and domain name to access this host."
+msgstr ""
+"Đáńáêáëț ćéóÜăćôć ôï üíïìá śńȚóôç ôïí êùäéêü đńüóâáóçò êáé ôï üíïìá ôïìĘá "
+"ăéá ôç óęíäćóç óôïí host."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Can't find %s on %s"
-msgstr "Äćí âńĘèçêć ôï %s óôï %s"
+msgid "Remove selected host"
+msgstr "Áöáßńćóç ćđéëćăìĘíïő őđïëïăéóôȚ"
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr "¶ńíçóç đńüóâáóçò êáôÜ ôç ìćôáöïńÜ ôïő %s óôï %s"
+msgid "Network configuration"
+msgstr "Ńőèìßóćéò äéêôęïő"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Bad password on %s"
-msgstr "ĆóöáëìĘíïò êùäéêüò óôï %s"
+msgid "No sharing"
+msgstr "Śùńßò êïéíȚ śńȚóç"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr "Śùńßò ćńțôçóç êùäéêïę óôï %s óôç èęńá %s"
+msgid "Move selected rule down one level"
+msgstr "Ìćôáêßíçóç ôïő ćđéëćăìĘíïő êáíüíá Ęíá ćđßđćäï êÜôù"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "ERROR: Cannot spawn %s."
-msgstr ""
+msgid "TB"
+msgstr "TB"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr ""
-"Ìđïńćß íá śńćéáóôïęí ìćńéêÜ ëćđôÜ ăéá ôç äçìéïőńăßá ôùí êëćéäéțí:To ../../"
-"standalone/drakbackup:1"
+msgid "Please check if you are using a DVDR device"
+msgstr "Đáńáêáëț ïńßóôć áí êÜíćôć śńȚóç óőóêćőȚò DVDR"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
+msgid "FATAL"
+msgstr "ÌÏÉŃÁÉÏ"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
"\n"
-" DrakBackup Report Details\n"
-"\n"
+"The network address is %s using a netmask of %s.\n"
"\n"
msgstr ""
+"Ï ćîőđçńćôçôȚò DHCP èá ćđéôńĘđćé Üëëïőò őđïëïăéóôĘò íá îćêéíïęí ìć ôç śńȚóç "
+"ôïő PXE ìć ìéá äïèćßóá äéćęèőíóç\n"
"\n"
-" DrakBackup ËćđôïìĘńćéćò ÁíáöïńÜò\n"
-"\n"
+"Ç äéćęèőíóç äéêôęïő ćßíáé %s ìć śńȚóç ìÜóêá äéêôęïő%s.\n"
"\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
+msgid "Delete"
+msgstr "ÄéáăńáöȚ"
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"Allow/Forbid reboot by the console user."
msgstr ""
"\n"
-" Äáßìïíáò áíáöïńÜò DrakBackup \n"
-"\n"
"\n"
+" śńȚóôçò."
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
msgstr ""
-"\n"
-" ÁíáöïńÜ DrakBackup \n"
-"\n"
+"Ìđïńț íá ńőèìßóù ôï óęóôçìÜ óáò Ęôóé țóôć íá îćêéíÜćé áőôüìáôá óć\n"
+"ăńáöéêü đćńéâÜëëïí (XFree).\n"
+"Ćđéèőìćßôć ôçí áőôüìáôç ćêêßíçóç ăńáöéêïę đćńéâÜëëïíôïò;"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "INFO"
-msgstr "ĐËÇŃÏÖÏŃÉĆÓ"
+msgid "Build the disk"
+msgstr "Äçìéïőńăßá äéóêĘôáò"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "FATAL"
-msgstr "ÌÏÉŃÁÉÏ"
+msgid "Disconnect %s"
+msgstr "Áđïóęíäćóç %s"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "WARNING"
-msgstr "ĐŃÏÓÏŚÇ"
+msgid "Status:"
+msgstr "ÊáôÜóôáóç:"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Cron not available yet as non-root"
-msgstr "Ôï cron äćí ćßíáé áêüìá äéáèĘóéìç óôïőò ìç-root"
+msgid "HTTP proxy"
+msgstr "HTTP proxy"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Ç ćăêáôÜóôáóç ôïő %s áđĘôőść. ĐńïêëȚèçêć ôï áêüëïőèï óöÜëìá:"
+msgid "SSH Server"
+msgstr "ĆîőđçńćôçôȚò SSH"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No, I don't want autologin"
-msgstr "Œśé, äćí ćđéèőìț áőôüìáôç đńïóđĘëáóç"
+msgid "\t-Network by rsync.\n"
+msgstr "\t-Äßêôőï ìĘóù rsync.\n"
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Íáé, ćđéèőìț áőôüìáôç đńïóđĘëáóç ìć (śńȚóôçò, đćńéâÜëëïí)"
+msgid "European protocol"
+msgstr "Ćőńùđáúêü đńùôüêïëëï"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "Ëćéôïőńăßá ăńáöéêïę đćńéâÜëëïíôïò êáôÜ ôçí ćêêßíçóç ôïő óőóôȚìáôïò"
+msgid ", printer \"%s\" on server \"%s\""
+msgstr ", ćêôőđùôȚò \"%s\"óôïí ćîőđçńćôçôȚ \"%s\""
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
#, c-format
-msgid "System mode"
-msgstr "ÊáôÜóôáóç óőóôȚìáôïò"
+msgid "Error"
+msgstr "ÓöÜëìá"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Bootsplash"
-msgstr "Bootsplash"
+msgid "allow \"su\""
+msgstr "äőíáôüôçôá \"su\""
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Lilo screen"
-msgstr "Ïèüíç Lilo"
+msgid "Australia"
+msgstr "Áőóôńáëßá"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
-"\n"
-"ĆđéëĘîôć ôï èĘìá \n"
-"ăéá ôï lilo êáé ôï\n"
-"bootsplash, ìđïńćßôć\n"
-"íá ôá ćđéëĘîćôć êáé\n"
-"îćśùńéóôÜ"
+msgid "please wait during ttmkfdir..."
+msgstr "đáńáêáëț đćńéìĘíćôć êáôÜ ôï ttmkfdir..."
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Themes"
-msgstr "ÈĘìáôá"
+msgid "Configure only card \"%s\"%s"
+msgstr "Ńęèìéóç ìüíï ôçò êÜńôáò \"%s\" %s"
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Splash selection"
-msgstr "ÔìȚìá Splash"
+msgid "Level"
+msgstr "Ćđßđćäï"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Change the printing system"
+msgstr "ÁëëáăȚ óőóôȚìáôïò ćêôęđùóçò"
+
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
msgstr ""
-"Śńçóéìïđïéćßôć ôïí %s ùò đńüăńáììá ćêêßíçóçò.\n"
-"ÊÜíôć êëéê óôï Ńęèìéóç ăéá íá îćêéíȚóćôć ôïí ïäçăü ćăêáôÜóôáóçò."
-
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr "ĆđéôőśȚò ćăêáôÜóôáóç èćìÜôùí LiLo êáé Bootsplash"
+"\n"
+" Ôé?"
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
#, c-format
-msgid "Theme installation failed!"
-msgstr "Ç ćăêáôÜóôáóç èĘìáôïò áđĘôőść!"
+msgid "Configure services"
+msgstr "Ńęèìéóç őđçńćóéțí"
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Notice"
-msgstr "Óçìćßùóç"
+msgid "Broadcast Address:"
+msgstr "Äéćęèőíóç ÌćôÜäïóçò:"
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Relaunch 'lilo'"
-msgstr "Ćđáíćêêßíçóç 'lilo'"
+msgid "mount failed: "
+msgstr "óęíäćóç áđĘôőść: "
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
msgstr ""
-"Áäőíáìßá ćđáíćêêßíçóçò ôïő LiLo!\n"
-"ĆêôćëĘóôć \"lilo\" ùò root óôçí ăńáììȚ ćíôïëțí ăéá íá ïëïêëçńùèćß ç "
-"ćăêáôÜóôáóç ôïő èĘìáôïò LiLo"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
+#, c-format
+msgid "Image"
+msgstr "Ćéêüíá"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
-msgstr "Äçìéïőńăßá initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"ÁđĘôőść ç đńïóèȚêç ôïő ćêôőđùôȚ \"%s\" óôï Star Office/OpenOffice.org/GIMP"
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr "Áäőíáìßá ćêêßíçóçò mkinitrd -f /boot/initrd-%s.img %s."
+msgid "Remote Administration"
+msgstr "ÁđïìáêńőóìĘíç äéáśćßńéóç"
-#: ../../standalone/drakboot:1
+#: ../../modules.pm:1
#, c-format
msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
msgstr ""
-"Áäőíáìßá ćăăńáöȚò /etc/sysconfig/bootsplash\n"
-"Ôï áńśćßï äćí âńĘèçêć."
+"Äćí őđÜńśćé đëĘïí őđïóôȚńéîç PCMCIA ăéá ôïőò đőńȚíćò 2.2. ÊÜíôć śńȚóç ôïő "
+"đőńȚíá 2.4."
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Write %s"
-msgstr "ĆăăńáöȚ %s"
+msgid "Selected All"
+msgstr "ĆđéëïăȚ Œëùí"
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr "Áäőíáìßá ćăăńáöȚò ôïő /etc/sysconfig/bootsplash."
+msgid "CUPS - Common Unix Printing System"
+msgstr "CUPS - Common Unix Printing System"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Lilo message not found"
-msgstr "Äćí âńĘèçêć ôï ìȚíőìá lilo"
+msgid "Webmin Service"
+msgstr "Őđçńćóßá Webmin"
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Copy %s to %s"
-msgstr "ÁíôéăńáöȚ %s óć %s"
+msgid "device"
+msgstr "óőóêćőȚ"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Backup %s to %s.old"
-msgstr "Áíôßăńáöï Áóöáëćßáò ôïő %s óć %s.old"
+msgid "All"
+msgstr "Œëá"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create new theme"
-msgstr "Äçìéïőńăßá íĘïő èĘìáôïò"
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "Đïéï óęóôçìá ćêôęđùóçò èĘëćôć íá śńçóéìïđïéȚóćôć;"
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"ĆìöÜíéóç èĘìáôïò\n"
-"óôçí êïíóüëá"
+msgid "Greece"
+msgstr "ĆëëÜäá"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Install themes"
-msgstr "ĆăêáôÜóôáóç èćìÜôùí"
+msgid "An error occurred"
+msgstr "ĐńïêëȚèçêć óöÜëìá"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Lilo/grub mode"
-msgstr "Ëćéôïőńăßá Lilo/grub"
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
+msgstr ""
+"Áőôü ôï đáêĘôï đńĘđćé íá áíáâáèìéóôćß\n"
+"Ćßóôć óßăïőńïò üôé èĘëćôć íá ôï áđïćđéëĘîćôć;"
-#: ../../standalone/drakboot:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Yaboot mode"
-msgstr "Ëćéôïőńăßá Yaboot"
+msgid "Tamil (Typewriter-layout)"
+msgstr "Ôáìéëéêü (äéÜôáîç ăńáöïìçśáíȚ)"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
+msgid "manual"
+msgstr "śćéńïêßíçôá"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/File/_Quit"
-msgstr "/Áńśćßï/ž_îïäïò"
+msgid "Printer manufacturer, model, driver"
+msgstr "ÊáôáóêćőáóôȚ ćêôőđùôȚ, ìïíôĘëï, ïäçăü"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "/_File"
-msgstr "/_Áńśćßï"
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"Äćí őđÜńśćé ìĘóï Ț őđÜńśćé đńïóôáóßá ćăăńáöȚò ăéá ôç óőóêćőȚ %s.\n"
+"Đáńáêáëț ćéóÜăćôć Ęíá."
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Style Configuration"
-msgstr "Ńęèìéóç Ôęđïő Ćêêßíçóçò"
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
+msgstr ""
+"Ï êáôÜëïăïò %s đćńéĘśćé Țäç äćäïìĘíá\n"
+"(%s)"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "No browser available! Please install one"
-msgstr "Äćí âńĘèçêć đćńéçăçôȚò! Đáńáêáëț ćăêáôáóôȚóôć ôïí"
+msgid "Printer on NetWare server"
+msgstr "ĆêôőđùôȚ óć ćîőđçńćôçôȚ NetWare"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "connecting to Bugzilla wizard ..."
-msgstr "óęíäćóç óôïí ïäçăü Bugzilla ..."
+msgid "Give the ram size in MB"
+msgstr "ĆéóÜăćôć ìĘăćèïò ìíȚìçò óć MB"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Package not installed"
-msgstr "Ôï đáêĘôï äćí ćßíáé ćăêáôćóôçìĘíï"
+msgid "Real name"
+msgstr "Đńáăìáôéêü üíïìá"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Not installed"
-msgstr "Ìç ćăêáôćóôçìĘíï"
+msgid "done"
+msgstr "Ïëïêëçńțèçêć"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Standalone Tools"
-msgstr "ÎćśùńéóôÜ Ćńăáëćßá"
+msgid "Please uncheck or remove it on next time."
+msgstr "Đáńáêáëț áöáéńĘóôć ôï ôçí ćđüìćíç öïńÜ."
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Report"
-msgstr "ÁíáöïńÜ"
+msgid "Higher"
+msgstr "Őűçëüôćńï"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the partitions you want to format"
+msgstr "ĆđéëĘîôć êáôáôìȚóćéò đńïò ìïńöïđïßçóç"
+
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
+"\n"
"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
+"Äćí âńĘèçêć êÜńôá ôçëćüńáóçò óôï ìçśÜíçìÜ óáò.Đáńáêáëț âćâáéùèćßôć üôé ìéá "
+"őđïóôçńéæüìćíç êÜńôá óôï Linux ćßíáé óőíäćìĘíç.\n"
+"\n"
+"\n"
+"Ìđïńćßôć íá ćđéóêćöôćßôć ôçí âÜóç äćäïìĘíùí óôï: \n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Release: "
-msgstr "žêäïóç:"
+msgid "Can't find %s on %s"
+msgstr "Äćí âńĘèçêć ôï %s óôï %s"
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Kernel:"
-msgstr "ĐőńȚíáò:"
+msgid "Japanese 106 keys"
+msgstr "Éáđùíéêü 106 đëȚêôńùí"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Package: "
-msgstr "ĐáêĘôï:"
+msgid "This will take a few minutes."
+msgstr "Áőôü èá äéáńêĘóćé ìćńéêÜ ëćđôÜ."
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Application:"
-msgstr "ĆöáńìïăȚ:"
+msgid "Burkina Faso"
+msgstr "Ìđïőńêßíá ÖÜóï"
-#: ../../standalone/drakbug:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Configuration Wizards"
-msgstr "Ïäçăïß Ńęèìéóçò"
+msgid "Use scanners on remote computers"
+msgstr "ŚńȚóç óáńùôțí óć áđïìáêńőóìĘíïőò őđïëïăéóôĘò"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
+msgid "Delete selected rule"
+msgstr "ÄéáăńáöȚ ćđéëćăìĘíïő êáíüíá"
-#: ../../standalone/drakbug:1
-#, c-format
-msgid "Windows Migration tool"
-msgstr "Ćńăáëćßï ÌćôÜâáóçò Windows "
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Accessing printers on remote CUPS servers"
+msgstr "CUPS"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
+msgid "Insert a floppy in %s"
+msgstr "ĆéóÜăćôć äéóêĘôá óôïí ïäçăü %s"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Software Manager"
-msgstr "ÄéáśćéńéóôȚò Ëïăéóìéêïę"
+msgid "Maldives"
+msgstr "Ìáëäßâćò"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Remote Control"
-msgstr "ÁđïìáêńőóìĘíïò žëćăśïò"
+msgid "compact"
+msgstr "óőìđáăȚò"
-#: ../../standalone/drakbug:1
+#: ../../common.pm:1
#, c-format
-msgid "Msec"
-msgstr "Msec"
+msgid "1 minute"
+msgstr "1 ëćđôü"
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
+msgid "on channel %d id %d\n"
+msgstr "óôï êáíÜëé %d id %d\n"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Mandrake Online"
-msgstr "Mandrake Online"
+msgid ", multi-function device"
+msgstr ", đïëőśńçóôéêȚ óőóêćőȚ"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
+msgid "Laos"
+msgstr "ËÜïò"
-#: ../../standalone/drakbug:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Synchronization tool"
-msgstr "Ćńăáëćßï Óőăśńïíéóìïę"
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr ""
+"Äćí őđÜńśćé êáôÜìôçóç FAT ăéá áëëáăȚ ìćăĘèïőò (Ț äćí őđÜńśćé áńêćôüò śțńïò)"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "First Time Wizard"
-msgstr "Ïäçăüò Đńțôçò ÖïńÜò"
+msgid "Up"
+msgstr "ĐÜíù"
-#: ../../standalone/drakbug:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mandrake Control Center"
-msgstr "ÊĘíôńï ĆëĘăśïő Mandrake"
+msgid "Firewall"
+msgstr "Ôïßśïò Đńïóôáóßáò"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Mandrake Bug Report Tool"
-msgstr "Ćńăáëćßï ÁíáöïńÜò ÓöáëìÜôùí Mandrake"
+msgid "Area:"
+msgstr "ĐćńéïśȚ:"
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Parameters"
-msgstr "ĐáńÜìćôńïé"
+msgid "(E)IDE/ATA controllers"
+msgstr "ćëćăêôĘò (E)IDE/ATA"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Configuration"
-msgstr "Ńęèìéóç Óęíäćóçò Äéáäéêôęïő"
+msgid "Printer Server"
+msgstr "ĆîőđçńćôçôȚò Ćêôőđțóćùí"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "DHCP Client"
-msgstr "ĐćëÜôçò DHCP"
+msgid "Disconnection from the Internet complete."
+msgstr "Ç áđïóęíäćóç áđü ôï Äéáäßêôőï ïëïêëçńțèçêć."
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ethernet Card"
-msgstr "ÊÜńôá Ethernet"
+msgid "Custom configuration"
+msgstr "ĐńïóáńìïóìĘíç Ńęèìéóç"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Gateway"
-msgstr "Đęëç äéêôęïő"
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
+"Đáńáêáëț äçëțóôć ôç èĘóç đïő èá ćßíáé đńïóâÜóéìç ç ćéêüíáò ćăêáôÜóôáóçò.\n"
+"\n"
+"Áí äćí Ęśćôć Ęíáí őđÜńśïí êáôÜëïăï, đáńáêáëț áíôéăńÜűćôć ôá đćńéćśüìćíá ôïő "
+"CD or DVD.\n"
+"\n"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connection type: "
-msgstr "Ôęđïò óęíäćóçò: "
+msgid "Saint Pierre and Miquelon"
+msgstr "Óáéíô Đéćń êáé Ìéêćëüí"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
+msgstr ""
+"\n"
+" ĆđáíáöïńÜ\n"
+"\n"
+" Drakbackup\n"
+"\n"
+" Drakbackup\n"
+"\n"
+" óçìáíôéêü\n"
+
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Profile: "
-msgstr "Đńïößë: "
+msgid "saving Bootsplash theme..."
+msgstr "áđïèȚêćőóç èĘìáôïò Bootsplash ..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet connection configuration"
-msgstr "Ńęèìéóç óęíäćóçò Äéáäéêôęïő"
+msgid "Portugal"
+msgstr "Đïńôïăáëßá"
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Äćí Ęśćôć óęíäćóç ìć ôï äéáäßêôőï.\n"
-"ÄçìéïőńăȚóôć ìßá êÜíïíôáò êëéê óôï 'Ńęèìéóç'"
+msgid "Do you have another one?"
+msgstr "žśćôć Üëëïí;"
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Ç äéćđáöȚ äćí Ęśćé ńőèìéóôȚ áêüìá. \n"
-"ĆêôćëĘóôć ôïí ïäçăü ńęèìéóçò óôçí êőńßùò ïèüíç"
+msgid ", printing to %s"
+msgstr ", ćêôęđùóç óôï %s"
-#: ../../standalone/drakconnect:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Assign host name from DHCP address"
+msgstr "ĐńĘđćé íá ïńßóôć ôïí äéêôőáêü üíïìá Ț ôçí IP äéćęèőíóç.\n"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "activate now"
-msgstr "ćíćńăïđïßçóç ôțńá"
+msgid "Toggle to normal mode"
+msgstr "ÁëëáăȚ óć êáíïíéêü ôńüđï ëćéôïőńăßáò"
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "deactivate now"
-msgstr "áđćíćńăïđïßçóç ôțńá"
+msgid "Generic"
+msgstr "ĂćíéêȚ"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DHCP client"
-msgstr "đćëÜôçò DHCP"
+msgid "Cylinder %d to %d\n"
+msgstr "Êęëéíäńïò áđü %d Ęùò %d\n"
#: ../../standalone/drakconnect:1
#, c-format
-msgid "Started on boot"
-msgstr "Îćêßíçóáí óôçí ćêêßíçóç"
+msgid "New profile..."
+msgstr "ÍĘï đńïößë..."
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Protocol"
-msgstr "Đńùôüêïëëï Ćêêßíçóçò"
+msgid "Which disk do you want to move it to?"
+msgstr "Óć đïéüí äßóêï èĘëćôć íá ìćôáêéíçèćßôć;"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Adapter %s: %s"
-msgstr "ĐńïóáńìïăĘáò %s: %s"
+msgid "Display logo on Console"
+msgstr "ĆìöÜíéóç ëïăüôőđïő óôçí Êïíóüëá"
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "LAN Configuration"
-msgstr "Ńęèìéóç LÁÍ"
+msgid "Windows Domain"
+msgstr "ÔïìĘáò Windows "
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "LAN configuration"
-msgstr "Ńęèìéóç LAN"
+msgid "Interface %s (on network %s)"
+msgstr "ÄéćđáöȚ %s (óôï äßêôőï %s)"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Äćí Ęśćôć êÜđïéá ńőèìéóìĘíç äéćđáöȚ.\n"
-"Ńőèìßóôć ôçí êÜíïíôáò êëéê óôï 'Ńęèìéóç'"
+msgid "INFO"
+msgstr "ĐËÇŃÏÖÏŃÉĆÓ"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connect..."
-msgstr "Óęíäćóç..."
+msgid "Wallis and Futuna"
+msgstr "ÍȚóïé ĂïőÜëéò êáé Öïőôïęíá"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Disconnect..."
-msgstr "Áđïóęíäćóç..."
+msgid "Need to create /etc/dhcpd.conf first!"
+msgstr "ĐńĘđćé íá äçìéïőńăȚóù đńțôá ôï /etc/dhcpd.conf!"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Not connected"
-msgstr "Äć óőíäĘèçêć"
+msgid "Is FPU present"
+msgstr "Ôï FPU ćßíáé đáńüí"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Connected"
-msgstr "ÓőíäĘèçêć"
+msgid "There are no scanners found which are available on your system.\n"
+msgstr "Äćí âńĘèçêáí óáńùôĘò đïő íá ćßíáé äéáèĘóéìïé óôï óęóôçìÜ óáò.\n"
-#: ../../standalone/drakconnect:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
+"No additional information\n"
+"about this service, sorry."
msgstr ""
-"Đńïćéäïđïßçóç, ćíôïđßóôçêć ìéá Üëëç óęíäćóç Äéáäéêôęïő đïő ßóùò śńçóéìïđïéćß "
-"ôï äßêôőü óáò"
+"Śùńßò ćđéđëĘïí đëçńïöïńßćò\n"
+"ăéá áőôȚ ôçí őđçńćóßá."
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Interface:"
-msgstr "ÄéćđáöȚ:"
+msgid "Build Single NIC -->"
+msgstr "Äçìéïőńăßá Ìïíïę NIC -->"
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Gateway:"
-msgstr "Đęëç äéêôęïő:"
+msgid "Is this correct?"
+msgstr "Óùóôü;"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Apply"
-msgstr "ĆöáńìïăȚ"
+msgid "Marshall Islands"
+msgstr "ÍȚóïé ÌÜńóáë"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Click here to launch the wizard ->"
-msgstr "ÊÜíôć êëéê ćäț ăéá íá îćêéíȚóćé ï ïäçăüò ->"
+msgid "Windows (FAT32)"
+msgstr "Windows (FAT32)"
-#: ../../standalone/drakconnect:1
+#: ../../steps.pm:1
#, c-format
-msgid "Wizard..."
-msgstr "Ïäçăüò..."
+msgid "Root password"
+msgstr "Êùäéêüò Root"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Build All Kernels -->"
+msgstr "Œëá"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "Status:"
-msgstr "ÊáôÜóôáóç:"
+msgid "if set to yes, report unowned files."
+msgstr "áí ïńéóôćß íáé, áíáöïńÜ Üăíùóôùí áńśćßùí."
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Type:"
-msgstr "Ôęđïò:"
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"Äćí Ęśćôć ïńßóćé êáôÜôìçóç swap\n"
+"\n"
+"Íá óőíćśßóù;"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet access"
-msgstr "Đńüóâáóç óôï Äéáäßêôőï"
+msgid "Server IP missing!"
+msgstr "Ëćßđćé ç IP ôïő ćîőđçńćôçôȚ!"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Hostname: "
-msgstr "Œíïìá óőóôȚìáôïò: "
+msgid "Suriname"
+msgstr "ÓïőńéíÜì"
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Ńęèìéóç ôïđéêïę äéêôęïő..."
+msgid "Enable ACPI"
+msgstr "Ćíćńăïđïßçóç ACPI"
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "State"
-msgstr "ÊáôÜóôáóç:"
+msgid "Graphical Environment"
+msgstr "Ăńáöéêü ĐćńéâÜëëïí"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Driver"
-msgstr "Ïäçăüò"
+msgid "Gibraltar"
+msgstr "ĂéâńáëôÜń"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Protocol"
-msgstr "Đńùôüêïëëï"
+msgid "on Tape Device"
+msgstr "óôç ÓőóêćőȚ Ôáéíßáò"
-#: ../../standalone/drakconnect:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Interface"
-msgstr "ÄéćđáöȚ"
+msgid "Do nothing"
+msgstr "Ìçí êÜíćéò ôßđïôá"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Configure Internet Access..."
-msgstr "Ńęèìéóç Đńüóâáóçò óôï Äéáäßêôőï..."
+msgid "Delete Client"
+msgstr "ÄéáăńáöȚ ĐćëÜôç"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Wait please"
-msgstr "Đáńáêáëț đćńéìĘíćôć"
+msgid "Filesystem type: "
+msgstr "Ôęđïò óőóôȚìáôïò áńśćßùí: "
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Œíïìá ăéá ôï đńïößë đïő èá äçìéïőńăçèćß (ôï íĘï đńïößë äçìéïőńăćßôáé óáí "
-"áíôßăńáöï ôïő őđÜńśïíôïò):"
+msgid "Starting network..."
+msgstr "Ćêêßíçóç äéêôęïő..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "New profile..."
-msgstr "ÍĘï đńïößë..."
+msgid "Vietnam"
+msgstr "ÂéćôíÜì"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Profile to delete:"
-msgstr "Đńïößë ăéá äéáăńáöȚ:"
+msgid "/_Fields description"
+msgstr "/_ĐćńéăńáöȚ Đćäßùí"
-#: ../../standalone/drakconnect:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "Del profile..."
-msgstr "ÄéáăńáöȚ đńïößë..."
+msgid "Optimize your security by using Mandrake Linux"
+msgstr "ÂćëôéóôïđïéȚóôć ôçí áóöÜëćéÜ óáò"
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Ńęèìéóç äéêôęïő (%d đńïóáńìïăćßò)"
+msgid "Help"
+msgstr "ÂïȚèćéá"
-#: ../../standalone/drakedm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
-"Ï ÄéáśćéńéóôȚò ĐńïâïëȚò X11 óáò ćđéôńĘđćé íá óőíäćèćßôć\n"
-"ìć ăńáöéêü ôńüđï óôï óęóôçìÜ óáò ìć ôï Óęóôçìá Đáńáèęńïő Ś íá őđïóôçńßæćé\n"
-"ôáőôüśńïíćò äéáöïńćôéêĘò óőíćäńßćò Ś óôï ìçśÜíçìÜ óáò."
+msgid "Your personal phone number"
+msgstr "Đńïóùđéêüò áńéèìüò ôçëćöțíïő"
-#: ../../standalone/drakedm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Choosing a display manager"
-msgstr "ĆđéëĘăïíôáò Ęíáí äéáśćéńéóôȚ đńïâïëȚò"
+msgid "Which size do you want to keep for Windows on"
+msgstr "Ôé śțńï èĘëćôć íá êńáôȚóćôć ăéá ôá windows óôï"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
msgstr ""
-"Áäőíáìßá óùóôïę ôćńìáôéóìïę ôïő mkbootdisk: \n"
-" %s \n"
-" %s"
+"Ìßá Ț đćńéóóüôćńćò äïêéìáóôéêĘò óćëßäćò óôÜëèçêáí óôïí ćêôőđùôȚ.\n"
+"Ìđïńćß íá đćńÜóćé êÜđïéïò śńüíïò ìĘśńé ç ćêôęđùóç íá îćêéíȚóćé.\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unable to fork: %s"
-msgstr "Áäőíáìßá fork: %s"
+msgid "Username required"
+msgstr "Áđáéôćßôáé üíïìá śńȚóôç"
-#: ../../standalone/drakfloppy:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
+msgstr ""
+"ćî' ïńéóìïę\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" ¶ëëá\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"."
+
+#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "ĆđéëïăĘò ćêôőđùôȚ SMB (Windows 9x/NT)"
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
msgstr ""
-"Äćí őđÜńśćé ìĘóï Ț őđÜńśćé đńïóôáóßá ćăăńáöȚò ăéá ôç óőóêćőȚ %s.\n"
-"Đáńáêáëț ćéóÜăćôć Ęíá."
+"\n"
+"\n"
+" ÁđïäïśȚ ¶ńíçóç."
#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "Óéăïőńćőôćßôć đùò Ęíá ìĘóï ćßíáé đáńüí ăéá ôç óőóêćőȚ %s"
+msgid "mkinitrd optional arguments"
+msgstr "đńïáéńćôéêĘò ćđéëïăĘò ôïő mkinitrd"
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Build the disk"
-msgstr "Äçìéïőńăßá äéóêĘôáò"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Output"
-msgstr "žîïäïò"
+msgid "Protocol for the rest of the world"
+msgstr "Đńùôüêïëëï őđüëïéđïő êüóìïő"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove a module"
-msgstr "ÁđïìÜêńőíóç áńèńțìáôïò"
+msgid "Print test pages"
+msgstr "Ćêôęđùóç äïêéìáóôéêțí óćëßäùí"
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Add a module"
-msgstr "ĐńïóèȚêç áńèńțìáôïò"
+msgid "64 MB or more"
+msgstr "64 MB Ț đćńéóóüôćńá"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "omit scsi modules"
-msgstr "đáńÜëćéűç ôùí áńèńùìÜôùí scsi"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
+"Đáńáêáëț ćđéëĘîôć ôéò äïêéìáóôéêĘò óćëßäćò đïő èá ćêôőđùèïęí.\n"
+"Óçì.: Ç äïêéìáóôéêȚ óćëßäá öùôïăńáößáò ìđïńćß íá äéáńêĘóćé áńêćôü śńüíï ăéá "
+"íá ćêôőđùèćß êáé óć ćêôőđùôĘò laser ìć ìéêńȚ ìíȚìç ìđïńćß êáé íá ìçí "
+"ćêôőđùèćß. Óôéò đćńéóóüôćńćò đćńéđôțóćéò ç ćêôęđùóç ôéò ôőđéêȚò äïêéìáóôéêȚò "
+"óćëßäáò áńêćß."
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "if needed"
-msgstr "áí śńćéÜæćôáé"
+msgid "Please select the device where your %s is attached"
+msgstr "Đáńáêáëț ćđéëĘîôć ôçí óőóêćőȚ óôçí ïđïßá ćßíáé óőíäćìĘíï ôï %s"
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "omit raid modules"
-msgstr "đáńÜëćéűç ôùí áńèńùìÜôùí raid"
+msgid "Not formatted\n"
+msgstr "Áìïńöïđïßçôïò\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "force"
-msgstr "ìćôÜ âßáò"
+msgid "Periodic Checks"
+msgstr "Đćńéïäéêïß žëćăśïé"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "mkinitrd optional arguments"
-msgstr "đńïáéńćôéêĘò ćđéëïăĘò ôïő mkinitrd"
+msgid "PXE Server Configuration"
+msgstr "Ńőèìßóćéò ÄéáêïìéóôȚ PXE"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Expert Area"
-msgstr "ĐćńéïśȚ ĐńïśùńçìĘíùí"
+msgid "Backup the system files before:"
+msgstr "Áíôßăńáöá áóöáëćßáò áńśćßùí óőóôȚìáôïò đńéí áđü:"
-#: ../../standalone/drakfloppy:1
+#: ../../security/level.pm:1
#, c-format
-msgid "kernel version"
-msgstr "Ęêäïóç đőńȚíá"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"Áőôü ćßíáé ôï óőíçèéóìĘíï ćđßđćäï áóöáëćßáò ăéá Ęíá óęóôçìá đïő èá óőíäćèćß "
+"ùò đćëÜôçò óôï Äéáäßêôőï."
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
#, c-format
-msgid "default"
-msgstr "ćî' ïńéóìïę"
+msgid "First floppy drive"
+msgstr "Đńțôïò ïäçăüò äéóêĘôáò"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "General"
-msgstr "ĂćíéêÜ"
+msgid "/File/_Quit"
+msgstr "/Áńśćßï/ž_îïäïò"
-#: ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "boot disk creation"
-msgstr "äçìéïőńăßá äéóêĘôáò ćêêßíçóçò"
+msgid "Dvorak"
+msgstr "Dvorak"
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "Choose the new size"
+msgstr "ĆđéëĘîôć ôï íĘï ìĘăćèïò"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Size"
-msgstr "ÌĘăćèïò"
+msgid "Media class"
+msgstr "ÊëÜóç ÌĘóïő"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Module name"
-msgstr "Œíïìá áńèńțìáôïò"
+msgid "The %s is not known by this version of Scannerdrake."
+msgstr "Ôï %s äćí ćßíáé ăíùóôü áđü áőôȚ ôçí Ęêäïóç ôïő Scannerdrake."
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Post Uninstall"
-msgstr ""
+msgid "Faroe Islands"
+msgstr "ÍȚóïé Öćńüćò"
#: ../../standalone/drakfont:1
#, c-format
-msgid "Remove fonts on your system"
-msgstr "Áöáßńćóç ăńáììáôïóćéńțí áđü ôï óęóôçìÜ óáò"
+msgid "Restart XFS"
+msgstr "Ćđáíćêêßíçóç XFS"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Initial tests"
-msgstr "ÁńśéêÜ ôćóô"
+msgid "Add host/network"
+msgstr "ĐńïóèȚêç őđïëïăéóôȚ/äßêôőï"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Post Install"
+msgid ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
msgstr ""
+"áí ïńéóôćß íáé, Ęëćăśïò ăéá êćíïęò êùäéêïęò đńüóâáóçò, ăéá êáíĘíáí êùäéêü "
+"đńüóâáóçò óôï /etc/shadow êáé ăéá śńȚóôćò ìć id 0 ćêôüò áđü ôïí root."
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Install & convert Fonts"
-msgstr "ĆăêáôÜóôáóç & ìćôáôńïđȚ Ăńáììáôïóćéńțí"
+msgid "Please enter the directory to save to:"
+msgstr "Đáńáêáëț ïńßóôć ôïí êáôÜëïăï áđïèȚêćőóçò: "
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Copy fonts on your system"
-msgstr "ÁíôéăńáöȚ ăńáììáôïóćéńțí óôï óęóôçìÜ óáò"
+msgid "Model name"
+msgstr "Œíïìá ìïíôĘëïő"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remove List"
-msgstr "Ëßóôá Áöáßńćóçò"
+msgid "Albania"
+msgstr "Áëâáíßá"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Selected All"
-msgstr "ĆđéëïăȚ Œëùí"
+msgid "No CDR/DVDR in drive!"
+msgstr "Äćí őđÜńśćé CDR/DVDR óôïí ïäçăü!"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unselected All"
-msgstr "ÁđïćđéëïăȚ Œëùí"
+msgid "British Indian Ocean Territory"
+msgstr "ÂńćôáíéêÜ ĆäÜöç Éíäéêïę Ùêćáíïę"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "here if no."
-msgstr "ćäț áí üśé."
+msgid "Normal Mode"
+msgstr "ÊáíïíéêȚ ÊáôÜóôáóç"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Please be sure that the cron daemon is included in your services. \n"
+"\n"
+"Note that currently all 'net' medias also use the hard drive."
+msgstr ""
+"\n"
+"\n"
+" Óçìćßùóç."
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "click here if you are sure."
-msgstr "êÜíôć êëéê ćäț áí ćßóôć âĘâáéïé"
+msgid "Printer connection type"
+msgstr "Ôęđï óęíäćóç ćêôőđùôȚ"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Install List"
-msgstr "Ëßóôá ĆăêáôÜóôáóçò"
+msgid "No network adapter on your system!"
+msgstr "Äćí âńĘèçêć đńïóáńìïăĘáò äéêôęïő óôï óęóôçìÜ óáò!"
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-"ĆđéëĘîôć ôï áńśćßï ăńáììáôïóćéńĘò Ț ôïí êáôÜëïăï êáé êÜíôć êëéê óôï "
-"'ĐńïóèȚêç'"
+msgid "Network %s"
+msgstr "Äßêôőï %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-msgstr ""
-"Đńéí ćăêáôáóôȚóćôć ôéò ăńáììáôïóćéńĘò, âćâáéùèćßôć üôé Ęśćôć ôï äéêáßùìá íá "
-"êÜíćôć śńȚóç áőôțí ôùí ăńáììáôïóćéńțí êáèțò êáé íá ôéò ćăêáôáóôȚóćôć óôïí "
-"őđïëïăéóôȚ óáò\n"
-"\n"
-"-Ìđïńćßôć íá ćăêáôáóôȚóćôć ôéò ăńáììáôïóćéńĘò êáíïíéêÜ. Óć óđÜíéćò "
-"đćńéđôțóćéò, ćéêïíéêĘò ăńáììáôïóćéńĘò ìđïńïęí íá đáățóïőí ôïí ćîőđçńćôçôȚ Ś."
+msgid "Malayalam"
+msgstr "Ìáëáăéáëáìéêü"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generic Printers"
-msgstr "Ăćíéêïß ĆêôőđùôĘò"
+msgid "Option %s out of range!"
+msgstr "ĆđéëïăȚ %s ćêôüò ïńßïő!"
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Abiword"
-msgstr "Abiword"
+msgid "Connect %s"
+msgstr "Óęíäćóç %s"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Restarting CUPS..."
+msgstr "Ćđáíćêêßíçóç XFS"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "Ćêôęđùóç/ÓÜńùóç/ÊÜńôćò Öùôïăńáöéțí óôï\"%s\""
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
+msgid "Duplicate mount point %s"
+msgstr "Äéđëü óçìćßï óęíäćóçò %s"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "ĆđéëĘîôć ôéò ćöáńìïăĘò đïő èá őđïóôçńßæïőí ôéò ăńáììáôïóćéńĘò :"
+msgid "if set to yes, run chkrootkit checks."
+msgstr "áí ïńéóôćß íáé, ćêôĘëćóç ćëĘăśùí chkrootkit"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
+#, c-format
+msgid "Connection Configuration"
+msgstr "Ńőèìßóćéò óęíäćóçò"
+
+#: ../../harddrake/v4l.pm:1
+#, c-format
+msgid "Unknown|Generic"
+msgstr "¶ăíùóôï|Ăćíéêü"
+
+#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
msgstr ""
+"Linux\n"
"\n"
"\n"
-"\n"
-"<dchaumette\\@mandrakesoft.com>\n"
-"\n"
-"\n"
-" ĂćíéêÜ ¶äćéá\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" ĂćíéêÜ ¶äćéá\n"
-"\n"
-" ëçöèĘíôá ĂćíéêÜ ¶äćéá\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" ÔïìĘáò Windows \n"
-"\n"
-"\n"
+" Äéáäßêôőï\n"
+" Íáé Äéáäßêôőï Œśé\n"
"\n"
"\n"
+" Íáé\n"
"\n"
+" ĆăêáôÜóôáóç\n"
+" ¶êőńï."
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "About"
-msgstr "Đćńß"
-
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "Font List"
-msgstr "Ëßóôá Ăńáììáôïóćéńțí"
-
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Advanced Options"
-msgstr "ĐńïśùńçìĘíćò ĆđéëïăĘò"
+msgid "Quit"
+msgstr "žîïäïò"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Uninstall Fonts"
-msgstr "ÁđćăêáôÜóôáóç Ăńáììáôïóćéńțí"
+msgid "Myanmar"
+msgstr "ÌéáíìÜń"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Get Windows Fonts"
-msgstr "ËȚűç Ăńáììáôïóćéńțí Windows "
+msgid "Auto allocate"
+msgstr "Áőôüìáôç êáôáíïìȚ"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Import Fonts"
-msgstr "ĆéóáăùăȚ Ăńáììáôïóćéńțí"
+msgid "Check bad blocks?"
+msgstr "žëćăśïò ăéá śáëáóìĘíá ôìȚìáôá;"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "done"
-msgstr "Ïëïêëçńțèçêć"
+msgid "Other MultiMedia devices"
+msgstr "¶ëëá óőóêćőĘò ĐïëőìĘóùí"
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "xfs restart"
-msgstr "ćđáíćêêßíçóç xfs"
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "No remote machines"
+msgstr "(óć áőôü ôï ìçśÜíçìá)"
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "Suppress Fonts Files"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
+"\n"
+" ĆêôőđùôȚò Ïäçăüò\n"
+"\n"
+"\n"
+"\n"
+" áíéśíćęèçêć\n"
+"\n"
+" Ćđüìćíï ¶êőńï."
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restart XFS"
-msgstr "Ćđáíćêêßíçóç XFS"
+msgid "Authentication NIS"
+msgstr "Đéóôïđïßçóç NIS"
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Suppress Temporary Files"
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
+"Ç ćđéëïăȚ ``Áđáăüńćőóç ćđéëïățí ăńáììȚò ćíôïëȚò'' ćßíáé Üśńçóôç śùńßò êùäéêü "
+"đńüóâáóçò"
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "type1inst building"
-msgstr "äçìéïőńăßá type1inst"
-
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "pfm fonts conversion"
-msgstr "ìćôáôńïđȚ ăńáììáôïóćéńțí pfm"
-
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "ttf fonts conversion"
-msgstr "ìćôáôńïđȚ ăńáììáôïóćéńțí ttf"
-
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Ghostscript referencing"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Fonts conversion"
-msgstr "ÌćôáôńïđȚ Ăńáììáôïóćéńțí"
+msgid "Internet Connection Sharing currently enabled"
+msgstr "ÊïéíȚ Óęíäćóç Äéáäéêôęïő ćíćńăïđïéçìĘíç"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "True Type install done"
-msgstr "Ç ćăêáôÜóôáóçò True Type ïëïêëçńțèçêć"
+msgid "Card IO_0"
+msgstr "IO_0 êÜńôáò"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "đáńáêáëț đćńéìĘíćôć êáôÜ ôï ttmkfdir..."
+msgid "United Arab Emirates"
+msgstr "ÇíùìĘíá ÁńáâéêÜ ĆìéńÜôá"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "True Type fonts installation"
-msgstr "ĆăêáôÜóôáóç ăńáììáôïóćéńțí True Type"
+msgid "Card IO_1"
+msgstr "IO_1 êÜńôáò"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Fonts copy"
-msgstr "ÁíôéăńáöȚ Ăńáììáôïóćéńțí"
+msgid "Thailand"
+msgstr "ÔáúëÜíäç"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Search for fonts in installed list"
-msgstr "ÁíáæȚôçóç ăńáììáôïóćéńțí óôçí ëßóôá ćăêáôÜóôáóçò"
+msgid "Routers:"
+msgstr "ÄńïìïëïăçôĘò:"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "could not find any font.\n"
-msgstr "äćí âńĘèçêć êáìßá ăńáììáôïóćéńÜ\n"
+msgid "Kazakhstan"
+msgstr "ÊáæáêóôÜí"
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "Reselect correct fonts"
-msgstr "ÎáíáćđéëĘîôć ôéò óùóôĘò ăńáììáôïóćéńĘò"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Display all available remote CUPS printers"
+msgstr ""
+"ÁíáíĘùóç ëßóôáò ćêôőđùôțí ( ăéá íá ćìöáíßóćé üëïőò ôïőò äéáèĘóéìïőò "
+"áđïìáêńőóìĘíïőò ćêôőđùôĘò)"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_newt.pm:1
#, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr "äćí âńĘèçêáí ăńáììáôïóćéńĘò óôéò đńïóáńôçìĘíćò êáôáôìȚóćéò"
+msgid "Mandrake Linux Installation %s"
+msgstr "ĆăêáôÜóôáóç Mandrake Linux %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "no fonts found"
-msgstr "äćí âńĘèçêáí ăńáììáôïóćéńĘò"
+msgid "Thai keyboard"
+msgstr "ÔáúëáíäĘæéêï"
-#: ../../standalone/drakfont:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "parse all fonts"
-msgstr "áíÜëőóç üëùí ôùí ăńáììáôïóćéńțí"
+msgid "Dialup options"
+msgstr "ĆđéëïăĘò Óęíäćóçò"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unselect fonts installed"
-msgstr "Ïé áđïćđéëćăìĘíćò ăńáììáôïóćéńĘò ćăêáôáóôÜèçêáí"
+msgid "Bouvet Island"
+msgstr "ÍȚóïò ÌđïőâĘ"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Search installed fonts"
-msgstr "ÁíáæȚôçóç ćăêáôćóôçìĘíùí ăńáììáôïóćéńțí"
+msgid "If no port is given, 631 will be taken as default."
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
+"Change your Cd-Rom!\n"
"\n"
-"Click on Configure to launch the setup wizard."
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
-"Êáëțò ïńßóáôć óôï ćńăáëćßï ńęèìéóçò ôçò ÊïéíȚò Óęíäćóçò ôïő Äéáäéêôęïő!\n"
-"\n"
-"%s\n"
+"ÁëëáăȚ Cd-Rom!\n"
"\n"
-"ÊÜíôć êëéê óôï Ńęèìéóç ăéá íá îćêéíȚóćôć ôïí ïäçăü ćăêáôÜóôáóçò."
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "Ńęèìéóç ÊïéíȚò óęíäćóçò Äéáäéêôęïő"
+"Đáńáêáëț ćéóÜăćôć ôï Cd-Rom ìć üíïìá \"%s\" óôïí ïäçăü óáò êáé đáôȚóôć "
+"ĆíôÜîćé.\n"
+"ĆÜí äćí ôï Ęśćôć, đáôȚóôć Áêęńùóç ăéá áđïöőăȚ ćăêáôÜóôáóçò áđü áőôü ôï CdRom."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Ç ÊïéíȚ Óęíäćóç Äéáäéêôęïő äćí Ęśćé ńőèìéóôćß đïôĘ."
+msgid "Polish"
+msgstr "Đïëùíéêü"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Ç ńęèìéóç Ęśćé Țäç ăßíćé, êáé áőôȚ ôç óôéăìȚ ćßíáé ćíćńăïđïéçìĘíç."
+msgid "Mandrake Online"
+msgstr "Mandrake Online"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Ç ńęèìéóç Ęśćé Țäç ăßíćé, áëëÜ áőôȚ ôç óôéăìȚ ćßíáé áđćíćńăïđïéçìĘíç."
+msgid "\t-Network by webdav.\n"
+msgstr "\t-Äßêôőï ìĘóù webdav.\n"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
msgstr ""
-"Œëá Ęśïőí ńőèìéóôćß.\n"
-"Ìđïńćßôć ôțńá íá ìïéńÜæćóôć ôç óęíäćóȚ óáò óôï Äéáäßêôőï ìć Üëëïőò "
-"őđïëïăéóôĘò óôï ôïđéêü óáò äßêôőï, ìć ôçí śńȚóç áőôüìáôçò ńęèìéóçò äéêôęïő "
-"(DHCP)."
-
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Đńüâëçìá êáôÜ ôçí ćăêáôÜóôáóç ôïő đáêĘôïő %s"
+"Äćí âńĘèçêć đńïóáńìïăĘáò äéêôęïő Ethernet óôï óęóôçìÜ óáò. Đáńáêáëț "
+"śńçóéìïđïéćßóôć ôï đńüăńáììá ńęèìéóçò őëéêïę."
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakgw:1
#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Ńęèìéóç, ćăêáôÜóôáóç ëïăéóìéêïę, ćêêßíçóç ćîőđçńćôçôțí..."
+msgid "Netmask"
+msgstr "ÌÜóêá äéêôęïő"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Configuring..."
-msgstr "Ńęèìéóç..."
+msgid "No hard drives found"
+msgstr "Äćí âńĘèçêáí äßóêïé!"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "ĐéèáíȚ äéđëȚò äéćęèőíóçò LAN óôçí ôńĘśïőóá ńęèìéóç ôïő %s!\n"
+msgid "Logitech CC Series"
+msgstr "Logitech CC Series"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Ôï Ôïđéêü Äßêôőï äćí ôćëćéțíćé ìć `.0', ôćńìáôéóìüò."
+msgid "2 buttons"
+msgstr "Äęï đëȚêôńùí"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "Ćđáíáńęèìéóç äéćđáöȚò êáé ôïő ćîőđçńćôçôȚ DHCP"
+msgid "What kind is your ISDN connection?"
+msgstr "Ôé ćßäïőò ćßíáé ç ISDN óęíäćóȚ óáò;"
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr "Ç ìĘăéóôç ìßóèùóç (óć äćőôćńüëćđôá)"
+msgid "Label"
+msgstr "ĆôéêĘôá"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The default lease (in seconds)"
-msgstr "Ç đńïêáèïńéóìĘíç ìßóèùóç (óć äćőôćńüëćđôá)"
+msgid "Save on floppy"
+msgstr "ÁđïèȚêćőóç óć äéóêĘôá"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The DHCP end range"
-msgstr "To üńéï ôćńìáôéóìïę DHCP"
+msgid "Printer auto-detection"
+msgstr "Áőôüìáôç áíßśíćőóç ćêôőđùôțí"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The DHCP start range"
-msgstr "To üńéï ćêêßíçóçò DHCP"
+msgid "Which of the following is your ISDN card?"
+msgstr "Đïéá áđü ôéò đáńáêÜôù êÜńôćò ISDN ćßíáé ç äéêéÜ óáò;"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
-msgid "The internal domain name"
-msgstr "Ôï ćóùôćńéêü üíïìá ôïìĘá"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
+msgstr ""
+"Ôï NFS ćßíáé Ęíá äçìïöéëĘò đńùôüêïëëï ăéá ôïí äéáìïéńáóìü áńśćßùí óć \n"
+"äßêôőá TCP/IP. ÁőôȚ ç őđçńćóßá đńïóöĘńćé ëćéôïőńăßćò ćîőđçńćôçôȚ, ï \n"
+"ïđïßïò ńőèìßæćôáé áđü ôï áńśćßï /etc/exports."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The DNS Server IP"
-msgstr "Ç IP ôïő ćîőđçńćôçôȚ DNS"
+msgid "Msec"
+msgstr "Msec"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "(ÁőôȚ ôç) IP ôïő ćîőđçńćôçôȚ DHCP"
+msgid ""
+"=> Notice, a label changed:\n"
+"%s"
+msgstr ""
+"=> Óçì.:ìéá ćôéêĘôá Üëëáîć:\n"
+"%s"
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid ""
-"DHCP Server Configuration.\n"
-"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
-"\n"
+msgid "Number of capture buffers:"
msgstr ""
-"Ńęèìéóç ĆîőđçńćôçôȚ DHCP\n"
-"\n"
-"Ćäț ìđïńćßôć ćđéëĘîćôć ôéò äéÜöïńćò ćđéëïăĘò óôç ńęèìéóç ôïő ćîőđçńćôçôȚ "
-"DHCP\n"
-"Áí äćí îĘńćôć ôé óçìáßíćé áőôü, áđëÜ áöȚóôć ôï ùò Ęśćé\n"
-"\n"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Local Network adress"
-msgstr "ÔïđéêȚ äéćęèőíóç äéêôęïő"
+msgid "Your choice? (0/1, default `%s') "
+msgstr "Ç ćđéëïăȚ óáò; (0/1, ćî ïńéóìïę %s)"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
+"\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
+"\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
+"\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
"\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
msgstr ""
-"Ìđïńț íá êńáôȚóù ôéò ôńĘśïőóćò ńőèìßóćéò êáé íá őđïèĘóù üôé Țäç Ęśćé "
-"ńőèìéóôćß ï ćîőđçńćôçôȚò DHCP, đáńáêáëț ćëĘăîôć ćÜí Ęśù äéáâÜóćé óùóôÜ ôï "
-"Äßêôőï đïő śńçóéìïđïéćßôć ăéá ôï ôïđéêü óáò äßêôőï, äćí èá đćéńÜîùïęôć èá "
-"áëëÜîù ôéò ńőèìßóćéò ôïő ćîőđçńćôçôȚ DHCP.\n"
"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" Ćđüìćíï\n"
+"\n"
+" Đńïçăïęìćíï\n"
+" íĘï Linux\n"
+"\n"
+" Ăéá ĐńïśùńçìĘíïőò\n"
+"."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "French"
+msgstr "Ăáëëéêü"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTY)"
+msgstr "ÔóĘśéêï (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
+#, c-format
+msgid "Hardware probing in progress"
+msgstr "Áíßśíćőóç őëéêïę óć ćîĘëéîç"
#: ../../standalone/drakgw:1
#, c-format
+msgid "Net Device"
+msgstr "ÓőóêćőȚ Äéêôęïő"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Summary"
+msgstr "Đćńßëçűç"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
-"ÔńĘśïőóćò ńőèìßóćéò ôïő %s':\n"
-"\n"
-"Äßêôőï: %s\n"
-"Äéćęèőíóç IP : %s\n"
-"IP attribution: %s\n"
-"Ïäçăüò: %s"
+"(ĐáńÜëëçëćò èęńćò: /dev/lp0, /dev/lp1, ..., áíôßóôïéśćò ôùí LPT1:, "
+"LPT2:, ..., 1ïò ćêôőđùôȚò USB: /dev/usb/lp0, 2ïò USB ćêôőđùôȚò: /dev/usb/"
+"lp1, ...)."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Current interface configuration"
-msgstr "Ńęèìéóç ôńĘśïőóáò äéćđáöȚò"
+msgid "Next"
+msgstr "Ćđüìćíï"
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Show current interface configuration"
-msgstr "ĐńïâïëȚ ôçò ôńĘśïőóáò ńęèìéóçò äéćđáöȚ"
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "Äćí ìđïńćßôć íá ćăêáôáóôȚóćôć ôï đńüăńáììá ćêêßíçóçò óć êáôÜôìçóç %s\n"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "No (experts only)"
-msgstr "Œśé (ìüíï ăéá ćéäéêïęò)"
+msgid "CHAP"
+msgstr "CHAP"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Automatic reconfiguration"
-msgstr "Áőôüìáôç ćđáíáńęèìéóçò"
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp/zeroconf)"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
"\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
"\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
-"Đńïćéäïđïßçóç, ï đńïóáńìïăĘáò äéêôęïő (%s) Ęśćé Țäç ńęèìéóç\n"
"\n"
-"ÈĘëćôć íá îáíáńőèìéóôćß áőôüìáôá ;\n"
+" Êáëțò Ïńßóáôć\n"
"\n"
-"Ìđïńćßôć íá ôï êÜíćôć êáé ìüíïé óáò áëëÜ đńĘđćé íá îĘńćôć ôé êÜíćôć."
+"Ïé đáńÜìćôńïé ăéá ôçí áőôüìáôç ćăêáôÜóôáóç őđÜńśïőí óôá ôìȚìáôá áńéóôćńÜ"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface already configured"
-msgstr "Ç äéćđáöȚ Äéêôęïő Ęśćé Țäç ńőèìéóôćß"
+msgid "Puerto Rico"
+msgstr "ĐïőĘńôï Ńßêï"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""
-"Đáńáêáëț ćđéëĘîôć ôé đńïóáńìïăĘáò äéêôęïő èá óőíäćèćß óôï ôïđéêü óáò äßêôőï."
+"ôï đáêĘôï 'ImageMagick' ćßíáé áđáńáßôçôï ăéá ôçí ïëïêëȚńùóç ôçò ńęèìéóçò.\n"
+"ÊÜíôć êëéê óôï \"ĆíôÜîćé\" ăéá íá ćăêáôáóôȚóćôć ôï Ț \"¶êőńï\" ăéá Ęîïäï"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "Ëéèïőáíéêü \"number row\" QWERTY"
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
-"%s\n"
"\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
msgstr ""
-"ŐđÜńśćé ìüíï Ęíáò ńőèìéóìĘíïò đńïóáńìïăĘáò äéêôęïő óôï óęóôçìÜ óáò:\n"
+"Ôá đáńáêÜôù đáêĘôá èá áöáéńćèïęí ăéá íá áíáâáèìéóôćß ôï óęóôçìÜ óáò: %s\n"
"\n"
-"%s\n"
"\n"
-"Èá ńőèìéóôćß ôï Ôïđéêü óáò Äßêôőï ìć áőôüí ôïí đńïóáńìïăĘá."
+"ÈĘëćôć đńáăìáôéêÜ íá áöáéńĘóôć áőôÜ ôá đáêĘôá;\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface"
-msgstr "ÓőóêćőȚ äéêôęïő"
+msgid "Anguilla"
+msgstr "Áăêßëá"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Äćí âńĘèçêć đńïóáńìïăĘáò äéêôęïő Ethernet óôï óęóôçìÜ óáò. Đáńáêáëț "
-"śńçóéìïđïéćßóôć ôï đńüăńáììá ńęèìéóçò őëéêïę."
+msgid "NIS Domain"
+msgstr "ÔïìĘáò NIS"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No network adapter on your system!"
-msgstr "Äćí âńĘèçêć đńïóáńìïăĘáò äéêôęïő óôï óęóôçìÜ óáò!"
+msgid ""
+"\n"
+"- User Files:\n"
+msgstr ""
+"\n"
+"- Áńśćßá Śńçóôțí:\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s"
-msgstr "ÄéćđáöȚ %s"
+msgid "Antarctica"
+msgstr "ÁíôáńêôéêȚ"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "ÄéćđáöȚ %s (śńȚóç áńèńțìáôïò %s)"
+msgid "Mount options"
+msgstr "ĆđéëïăĘò óęíäćóçò"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Net Device"
-msgstr "ÓőóêćőȚ Äéêôęïő"
+msgid "Jamaica"
+msgstr "ÔæáìÜéêá"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
+"Ïńéóìüò raw óőóêćőțí ùò block óőóêćőțí (üđùò êáôáôìȚóćéò óêëçńțí\n"
+"äßóêùí), ăéá ôç śńȚóç ôïőò áđü ćöáńìïăĘò üđùò ç Oracle Ț óőóêćőĘò DVD"
-#: ../../standalone/drakgw:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
msgstr ""
-"Đńüêćéôáé íá ńőèìßóćôć ôïí őđïëïăéóôȚ óáò ăéá íá ìïéńÜæćôáé ôçí óęíäćóȚ ôïő "
-"óôï Äéáäßêôőï.\n"
-"Ìć áőôȚ ôç äőíáôüôçôá Üëëïé őđïëïăéóôĘò óôï ôïđéêü óáò äßêôőï èá ìđïńïęí "
-"íáêÜíïőí śńȚóç ôçò óęíäćóçò áőôïę ôïő őđïëïăéóôȚ óôï Äéáäßêôőï.\n"
-" \n"
-"Âćâáéùèćßôć üôé Ęśćôć ńőèìßóćé ôï Äßêôőï/Đńüóâáóç Äéáäéêôęïő ìć ôç śńȚóç ôïő "
-"drakconnect đńéí đńïśùńȚóćôć.\n"
-"\n"
-"Óçì. Èá đńĘđćé íá Ęśćôć ìéá êÜńôá äéêôęïő ăéá íá ńőèìßóćôć ôï Ôïđéêü óáò "
-"Äßêôőï (LAN)."
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Internet Connection Sharing"
-msgstr "ÊïéíȚ Óęíäćóç Äéáäéêôęïő"
+msgid "Please wait, preparing installation..."
+msgstr "Đáńáêáëț đćńéìĘíćôć, đńïćôïéìáóßá ćăêáôÜóôáóçò..."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Ç ÊïéíȚ Óęíäćóç óôï Äéáäßêôőï ôțńá ćíćńăïđïéȚèçêć."
+msgid "Czech (QWERTZ)"
+msgstr "ÔóĘśéêï (QWERTZ)"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Enabling servers..."
-msgstr "Ćíćńăïđïßçóç ćîőđçńćôçôțí..."
+msgid "Track network card id (useful for laptops)"
+msgstr ""
+"ÁíáæȚôçóç ôáőôüôçôáò ôçò êÜńôáò äéêôęïő (śńȚóéìï ăéá öïńçôïęò őđïëïăéóôĘò)"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "dismiss"
-msgstr "Üêőńï"
+msgid "The port number should be an integer!"
+msgstr "Ï áńéèìüò èęńáò đńĘđćé íá ćßíáé áêĘńáéïò áńéèìüò!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "reconfigure"
-msgstr "ćđáíáńęèìéóç"
+msgid "You must choose an image file first!"
+msgstr "ĐńĘđćé íá ćđéëĘîôć đńțôá ìéá ćéêüíá!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "enable"
-msgstr "ćíćńăïđïßçóç"
+msgid "Restore from Hard Disk."
+msgstr "ĆđáíáöïńÜ áđü ôïí óêëçńü äßóêï."
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Ç ńęèìéóç ôçò êïéíȚò śńȚóçò äéáäéêôęïő Ęśćé Țäç ăßíćé.\n"
-"Ćßíáé áđćíćńăïđïéçìĘíç.\n"
-"\n"
-"Ôé èĘëćôć íá êÜíćôć:"
+msgid "Add to LVM"
+msgstr "ĐńïóèȚêç óôï LVM"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "ÊïéíȚ Óęíäćóç Äéáäéêôęïő áđćíćńăïđïéçìĘíç"
+msgid "DNS server"
+msgstr "ĆîőđçńćôçôȚò DNS"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Ç ÊïéíȚ Óęíäćóç Äéáäéêôęïő ôțńá áđćíćńăïđïéȚèçêć."
+msgid "Trinidad and Tobago"
+msgstr "ÔńéíéíôÜíô êáé ÔïìđÜăêï"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disabling servers..."
-msgstr "Áđćíćńăïđïßçóç ćîőđçńćôçôțí..."
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr "Ôï LPD êáé ôï LPRng äćí őđïóôçńßæïőí ćêôőđùôĘò IPP.\n"
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "disable"
-msgstr "áđćíćńăïđïßçóç"
+msgid "simple"
+msgstr "áđëü"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Ç ńęèìéóç ôçò êïéíȚò óęíäćóçò ôïő Äéáäéêôęïő Ęśćé Țäç ăßíćé.\n"
-"ÁőôȚ ôç óôéăìȚ ćßíáé ćíćńăȚ.\n"
-"\n"
-"Ôé èĘëćôć íá êÜíćôć;"
+msgid "Clear all"
+msgstr "Êáèáńéóìüò üëùí"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "ÊïéíȚ Óęíäćóç Äéáäéêôęïő ćíćńăïđïéçìĘíç"
+msgid "No test pages"
+msgstr "Śùńßò äïêéìáóôéêĘò óćëßäćò"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
-msgstr "ËőđÜìáé, őđïóôçńßæïíôáé ìüíï ïé đőńȚíćò 2.4"
+msgid "Adapter %s: %s"
+msgstr "ĐńïóáńìïăĘáò %s: %s"
-#: ../../standalone/drakhelp:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
-msgstr ""
-"Äćí âńĘèçêć đćńéçăçôȚò óôï óęóôçìÜ óáò, Đáńáêáëț ćăêáôáóôȚóôć Ęíáí áí èĘëćôć "
-"íá đćńéçăçèćßôć óôï óęóôçìá âïȚèćéáò"
+msgid "Falkland Islands (Malvinas)"
+msgstr "ÍȚóïé Öțêëáíô (Ìáëâßíćò)"
-#: ../../standalone/drakperm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Path"
-msgstr "ÈĘóç"
+msgid "Unknown model"
+msgstr "¶ăíùóôï ìïíôĘëï"
-#: ../../standalone/drakperm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "group :"
-msgstr "ïìÜäá :"
+msgid "if set to yes, check files/directories writable by everybody."
+msgstr "áí ïńéóôćß íáé, Ęëćăśïò ôùí áńśćßùí/êáôáëüăùí ăéá ćăăńáöȚ áđü üëïőò."
-#: ../../standalone/drakperm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "authentication"
+msgstr "Đéóôïđïßçóç"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "user :"
-msgstr "śńȚóôçò :"
+msgid "Backup Now"
+msgstr "Áíôßăńáöá áóöáëćßáò Ôțńá"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Path selection"
-msgstr "ĆđéëïăȚ ÈĘóçò"
+msgid "/_File"
+msgstr "/_Áńśćßï"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "when checked, owner and group won't be changed"
-msgstr "üôáí ćđéëćăćß, ï éäéïêôȚôçò êáé ïìÜäá äćí èá áëëÜîïőí"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Ăßíćôáé áöáßńćóç ôïő ćêôőđùôȚ áđü ôï Star Office/OpenOffice.org/GIMP"
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
#, c-format
-msgid "Use group id for execution"
-msgstr "ŚńȚóç id ïìÜäáò ăéá ćêôĘëćóç"
+msgid ""
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
+msgstr ""
+"Ćêêßíçóç đáêĘôïő ößëôńïő ăéá ôïí đőńȚíá Linux ôçò óćéńÜò 2.2, ăéá ôçí "
+"ńęèìéóç\n"
+"ćíüò Ôïßśïőò Đńïóôáóßáò đïő èá đńïóôáôćęćé ôï ìçśÜíçìÜ óáò áđü äéêôőáêĘò "
+"ćđéèĘóćéò."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Use owner id for execution"
-msgstr "ŚńȚóç id êáôüśïő ăéá ćêôĘëćóç"
+msgid "Tamil (ISCII-layout)"
+msgstr "Ôáìéëéêü (äéÜôáîç ISCII)"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
+msgid "Mayotte"
+msgstr "Ìáăéüô"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Set-GID"
-msgstr "Ïńéóìüò GID"
+msgid "Creating auto install floppy..."
+msgstr "Äçìéïőńăßá äéóêĘôáò áőôüìáôçò ćăêáôÜóôáóçò..."
-#: ../../standalone/drakperm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Set-UID"
-msgstr "Ïńéóìüò UID"
+msgid "Searching for scanners ..."
+msgstr "Ăßíćôáé áíáæȚôçóç ăéá óáńùôĘò ..."
-#: ../../standalone/drakperm:1
+#: ../../steps.pm:1
#, c-format
-msgid "sticky-bit"
-msgstr ""
+msgid "Partitioning"
+msgstr "Êáôáìćńéóìüò"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Property"
-msgstr "Éäéüôçôá"
+msgid "Russia"
+msgstr "Ńùóßá"
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Permissions"
-msgstr "Äéêáéțìáôá"
+msgid "ethernet card(s) detected"
+msgstr "áíéśíćęèçêáí êÜńôá(ćò) ethernet"
-#: ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Current user"
-msgstr "ÔńĘśïí śńȚóôç"
+msgid "Syslog"
+msgstr "Syslog"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "browse"
-msgstr "áíáæȚôçóç"
+msgid "Can't create catalog!"
+msgstr "Áäęíáôç ç äçìéïőńăßá êáôáëüăïő!"
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Edit current rule"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "edit"
-msgstr "ćđćîćńăáóßá"
+msgid "Not enough free space for auto-allocating"
+msgstr ""
+"Äćí őđÜńśćé áńêćôüò ćëćęèćńïò śțńïò ăéá ôçí áőôüìáôç äçìéïőńăßá íĘùí "
+"êáôáôìȚóćùí"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Delete selected rule"
-msgstr "ÄéáăńáöȚ ćđéëćăìĘíïő êáíüíá"
+msgid "Set root password"
+msgstr "Êùäéêüò đńüóâáóçò root"
-#: ../../standalone/drakperm:1
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
+msgstr ""
+"Äćí őđÜńśćé ăíùóôüò ćíáëëáêôéêüò ïäçăüò OSS/ALSA ăéá ôçí êÜńôá Țśïő óáò (%s)"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "delete"
-msgstr "äéáăńáöȚ"
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr ""
+"ÌćôÜ ôçí áëëáăȚ ìćăĘèïőò óôçí êáôÜôìçóç %s, üëá ôá äćäïìĘíá óć áőôȚí ôçí "
+"êáôÜôìçóç èá śáèïęí"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Add a new rule at the end"
-msgstr "ĐńïóèȚêç íĘïő êáíüíá óôï ôĘëïò"
+msgid "Internet connection configuration"
+msgstr "Ńęèìéóç óęíäćóçò Äéáäéêôęïő"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "add a rule"
-msgstr "ĐńïóèȚêç ćíüò êáíüíá"
+msgid "Scanning for TV channels"
+msgstr "ÁíáæȚôçóç óôáèìțí ôçëćüńáóçò"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Move selected rule down one level"
-msgstr "Ìćôáêßíçóç ôïő ćđéëćăìĘíïő êáíüíá Ęíá ćđßđćäï êÜôù"
+msgid "Kernel:"
+msgstr "ĐőńȚíáò:"
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Down"
-msgstr "ÊÜôù"
+msgid "/_About..."
+msgstr "/_ÓśćôéêÜ ìć..."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Move selected rule up one level"
-msgstr "Ìćôáêßíçóç ôïő ćđéëćăìĘíïő êáíüíá Ęíá ćđßđćäï đÜíù"
+msgid "Bengali"
+msgstr "Âćăăáëéêü"
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Up"
-msgstr "ĐÜíù"
+msgid "Preference: "
+msgstr "Đńïôßìçóç: "
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "select perm file to see/edit"
-msgstr "ćđéëĘîôć ôï áńśćßï perm ăéá íá ôï äćßôć/ćđćîćńăáóôćßôć"
+msgid "Wizard..."
+msgstr "Ïäçăüò..."
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-"Ôï Drakperm śńçóéìïđïéćßôáé ăéá íá äćßôć ôá áńśćßá đïő śńćéÜæćóôć ăéá íá "
-"öôéÜîćôć äéêáéțìáôá, éäéïêôȚôćò êáé ïìÜäćò ìć ôï msec.\n"
-"Ćđßóçò ìđïńćßôć íá ćđćîćńăáóôćßôć ôïőò äéêïęò óáò êáíüíćò đïő èá "
-"áíôéêáôáóôȚóïőí ôïőò đńïćđéëćăìĘíïőò êáíüíćò."
+msgid "Services: %d activated for %d registered"
+msgstr "Őđçńćóßćò: %d ćíćńăïđïéçìĘíćò ăéá %d ćăăćăńáììĘíćò"
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1
#, c-format
-msgid "permissions"
-msgstr "äéêáéțìáôá"
+msgid "Create a bootdisk"
+msgstr "ÄéóêĘôá ćêêßíçóçò"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "group"
-msgstr "oìÜäá"
+msgid "Solomon Islands"
+msgstr "ÍȚóïé Óïëïìțíôïò"
-#: ../../standalone/drakperm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "user"
-msgstr "śńȚóôçò"
+msgid "(module %s)"
+msgstr "(Üńèńùìá %s)"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "path"
-msgstr "èĘóç"
+msgid "Workgroup"
+msgstr "ÏìÜäá ćńăáóßáò:"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "ÈĘóç ôïő áńśćßïő auto_install.cfg"
+msgid "Printer host name or IP"
+msgstr "Äéêôőáêü üíïìá ćêôőđùôȚ Ț IP"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Host Path or Module"
+msgstr "Óęóôçìá"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
+msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr ""
-"Đáńáêáëț äçëțóôć ôç èĘóç ôïő áńśćßïő auto_install.cfg file is located.\n"
-"\n"
-"ÁöȚóôć ôï êćíü áí äćí èĘëćôć íá êÜíćôć śńȚóç ôçò áőôüìáôçò ćăêáôÜóôáóçò.\n"
-"\n"
+"Ôï üíïìá ôïő ćêôőđùôȚ đńĘđćé íá đćńéĘśćé ìüíï ăńÜììáôá, áńéèìïęò êáé ôïí "
+"śáńáêôȚńá underscore"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
-"Äćí âńĘèçêáí ćéêüíćò CD Ț DVD, đáńáêáëț áíôéăńÜűôć ôï đńüăńáììá ćăêáôÜóôáóçò "
-"êáé ôá áńśćßá rpm."
+msgid "Show current interface configuration"
+msgstr "ĐńïâïëȚ ôçò ôńĘśïőóáò ńęèìéóçò äéćđáöȚ"
-#: ../../standalone/drakpxe:1
+#: ../../help.pm:1
#, c-format
-msgid "No image found"
-msgstr "Äćí âńĘèçêć ćéêüíá"
+msgid "Development"
+msgstr "ÁíÜđôőîç"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Installation image directory"
-msgstr "ĆăêáôÜóôáóç êáôáëüăïő ćéêüíáò"
+msgid "Done"
+msgstr "Ïëïêëçńțèçêć"
-#: ../../standalone/drakpxe:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
-"Đáńáêáëț äçëțóôć ôç èĘóç đïő èá ćßíáé đńïóâÜóéìç ç ćéêüíáò ćăêáôÜóôáóçò.\n"
-"\n"
-"Áí äćí Ęśćôć Ęíáí őđÜńśïí êáôÜëïăï, đáńáêáëț áíôéăńÜűćôć ôá đćńéćśüìćíá ôïő "
-"CD or DVD.\n"
-"\n"
+msgid "Web Server"
+msgstr "ĆîőđçńćôçôȚò Éóôïóćëßäùí"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The DHCP end ip"
-msgstr "Ç ôćëćőôáßá ip ôïő DHCP"
+msgid "\tDo not include System Files\n"
+msgstr "\tŚùńßò ôï Áńśćßï ÓőóôȚìáôïò\n"
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "The DHCP start ip"
-msgstr "Ç IP ćêêßíçóçò ôïő DHCP"
+msgid "Chile"
+msgstr "ŚéëȚ"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
msgstr ""
-"Ï ćîőđçńćôçôȚò DHCP èá ćđéôńĘđćé Üëëïőò őđïëïăéóôĘò íá îćêéíïęí ìć ôç śńȚóç "
-"ôïő PXE ìć ìéá äïèćßóá äéćęèőíóç\n"
+"Ïé ïäçăïß ôùí ćêôőđùôțí ìćëÜíçò đïő đáńĘśïíôáé áđü ôç Lexmark őđïóôçńßæïőí "
+"ìüíï ôïđéêïęò ćêôőđùôĘò, äćí őđïóôçńßæïőí ćêôőđùôĘò óć áđïìáêńőóìĘíïőò "
+"őđïëïăéóôĘò Ț ćîőđçńćôçôĘò ćêôőđțóćùí. Đáńáêáëț óőíäĘóôć ôïí ćêôőđùôȚ óáò óć "
+"ìéá ôïđéêȚ èęńá Ț ńőèìßóôć ôïí óôï ìçśÜíçìá đïő ćßíáé óőíäćäćìĘíïò."
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
"\n"
-"Ç äéćęèőíóç äéêôęïő ćßíáé %s ìć śńȚóç ìÜóêá äéêôęïő%s.\n"
+"Do not use \"scannerdrake\" for this device!"
+msgstr ""
+"óőóêćőȚ\n"
"\n"
+" Ïëïêëçńțèçêć óőóêćőȚ!"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
#, c-format
-msgid "Interface %s (on network %s)"
-msgstr "ÄéćđáöȚ %s (óôï äßêôőï %s)"
+msgid "(already added %s)"
+msgstr "(ôï %s Ęśćé Țäç đńïóôćèćß)"
-#: ../../standalone/drakpxe:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr ""
-"Đáńáêáëț ćđéëĘîôć đïéá äéćđáöȚ äéêôęïő èá śńçóéìïđïéȚóćôć ăéá ôïí "
-"ćîőđçńćôçôȚ dhcp."
+msgid ", using command %s"
+msgstr ", ìć ôçí ćíôïëȚ %s"
-#: ../../standalone/drakpxe:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+msgid "Alt and Shift keys simultaneously"
+msgstr "Ôáőôüśńïíá ôá đëȚêôńá Alt êáé Shift"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Flags"
msgstr ""
-"Đńüêćéôáé íá ńőèìßóôć ôïí őđïëïăéóôȚ óáò ăéá ôçí ćăêáôÜóôáóç ôï äéáêïìéóôȚ "
-"PXE ùò ćîőđçńćôçôȚ DHCP \n"
-"êáé äéáêïìéóôȚ TFTP ùò äéáêïìéóôȚ ćăêáôáóôÜóćùí.\n"
-"Ìć áőôȚ ôçí ćđéëïăȚ, Üëëïé őđïëïăéóôĘò óôï ôïđéêü óáò äßêôőï èá ìđïńïęí íá "
-"ćăêáôáóôáèïęí ìć ôç śńȚóç áőôïę ôïő őđïëïăéóôȚ.\n"
-"\n"
-"Âćâáéùèćßôć üôé Ęśćôć ńőèìßóćé ôçí đńüóâáóç óôï Äßêôőï/Äéáäßêôőï ìć ôç śńȚóç "
-"ôïő drakconnect đńéí đńïśùńȚóćôć.\n"
-"\n"
-"Óçì. Èá đńĘđćé íá Ęśćôć ìéá êÜńôá äéêôęïő ăéá íá ńőèìßóćôć ôï Ôïđéêü óáò "
-"Äßêôőï (LAN)."
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Installation Server Configuration"
-msgstr "ĆăêáôÜóôáóç Ńőèìßóćùí ÄéáêïìéóôȚ"
+msgid "Add/Del Users"
+msgstr "ĐńïóèȚêç/Áöáßńćóç Śńçóôțí"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "PXE Server Configuration"
-msgstr "Ńőèìßóćéò ÄéáêïìéóôȚ PXE"
+msgid "Host/network IP address missing."
+msgstr "Ëćßđćé ç äéćęèőíóç ôïő ŐđïëïăéóôȚ/Äéêôęïő."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please wait, setting security options..."
-msgstr "Đáńáêáëț đćńéìĘíćôć, ïńßæïíôáé ïé ćđéëïăĘò áóöáëćßáò..."
+msgid "weekly"
+msgstr "ćâäïìáäéáßá"
-#: ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Please wait, setting security level..."
-msgstr "Đáńáêáëț đćńéìĘíćôć, ńőèìßæćôáé ôï ćđßđćäï áóöáëćßáò..."
+msgid "Settings"
+msgstr "Ńőèìßóćéò"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Periodic Checks"
-msgstr "Đćńéïäéêïß žëćăśïé"
+msgid "The entered host/network IP is not correct.\n"
+msgstr ""
-#: ../../standalone/draksec:1
+#: ../../any.pm:1
#, c-format
-msgid "System Options"
-msgstr "ĆđéëïăĘò ÓőóôȚìáôïò"
+msgid "Here is the full list of available countries"
+msgstr "ÁőôȚ ćßíáé ç đëȚńçò ëßóôá ôùí äéáèĘóéìùí śùńțí"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Network Options"
-msgstr "ĆđéëïăĘò Äéêôęïő"
+msgid "Alternative test page (A4)"
+msgstr "ĆíáëëáêôéêȚ äïêéìáóôéêȚ óćëßäá (A4)"
-#: ../../standalone/draksec:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
-"Ïé đáńáêÜôù ćđéëïăĘò áóöáëćßáò ìđïńïęí íá ćđéëćăïęí\n"
-"ăéá ôçí đńïóáńìïăȚ ôçò áóöÜëćéáò. Ăéá ćđćîçăȚóćéò äćßôć ôçí âïȚèćéá.\n"
+"ĆÜí Ęśćôć üëá ôá đáńáêÜôù CDs, đáôȚóôć ĆíôÜîćé.\n"
+"ĆÜí äćí Ęśćôć êáíĘíá áđü ôá đáńáêÜôù CDs, đáôȚóôć Áêęńùóç.\n"
+"ĆÜí äćí Ęśćôć êÜđïéá áđü áőôÜ, áđïćđéëĘîôć ôá êáé đáôȚóôć ĆíôÜîćé."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Security Administrator:"
-msgstr "ÄéáśćéńéóôȚò Áóöáëćßáò:"
+msgid "Wait please"
+msgstr "Đáńáêáëț đćńéìĘíćôć"
-#: ../../standalone/draksec:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Security Alerts:"
-msgstr "ĆéäïđïéȚóćéò Áóöáëćßáò:"
+msgid "PAP"
+msgstr "PAP"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Security Level:"
-msgstr "Ćđßđćäï áóöáëćßáò:"
+msgid "Backup user files"
+msgstr "Áíôßăńáöá áóöáëćßáò áńśćßùí śńçóôțí"
-#: ../../standalone/draksec:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "(default value: %s)"
-msgstr "(ĐńïćđéëćăìĘíç ôéìȚ: %s)"
+msgid "New"
+msgstr "ÍĘï"
-#: ../../standalone/draksec:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-" to the Internet as a client.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
"\n"
-"High: There are already some restrictions, and more automatic checks "
-"are run every night.\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
"\n"
-"Higher: The security is now high enough to use the system as a server "
-"which can accept\n"
-" connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-" should choose a lower level.\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
"\n"
-"Paranoid: This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-" features are at their maximum\n"
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
"\n"
-"Security Administrator:\n"
-" If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-" email)"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
+"\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
+"\n"
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""
-"Ôőđéêü: ÁőôȚ ćßíáé ç ôőđéêȚ áóöÜëćéá đïő óőíéóôÜôáé óć ăéá őđïëïăéóôȚ đïő èá "
-"óőíäĘćôáé óôï Äéáäßêôőï ùò đćëÜôçò.\n"
+"Linux\n"
+" Root\n"
"\n"
-" Őűçëü: ŐđÜńśïőí êÜđïéïé đćńéïńéóìïß, êáé ćêôćëïęíôáé đćńéóóüôćńćò "
-"áőôüìáôïé Ęëćăśïé êÜèć âńÜäő.\n"
"\n"
-"Őűçëüôćńï: Ç áóöÜëćéá ćßíáé áńêćôÜ őűçëȚ ăéá íá êÜíćôć ôï óęóôçìá "
-"ćîőđçńćôçôȚò đïő ìđïńćß íá äćśôćß\n"
-" óőíäĘóćéò áđü đïëëïęò đćëÜôćò. Áí ôï ìçśÜíçìá ćßíáé ìüíï "
-"đćëÜôçò óôï Äéáäßêôőï, ćđéëĘîôć\n"
-" ôï śáìçëüôćńï ćđßđćäï\n"
"\n"
-" Đáńáíïúêü ćđßđćäï: Œìïéï ìć ôï đáńáđÜíù ćđßđćäï, áëëÜ ìć ôï óęóôçìá ćíôćëțò "
-"êëćéóôü êáé ìć ôéò ćđéëïăĘò\n"
-" áóöáëćßáò óôï ìĘăéóôï\n"
"\n"
-"ÄéáśćéńéóôȚò Áóöáëćßáò:\n"
-" Áí Ęśćé ćđéëćăćß ôï 'ĆéäïđïéȚóćéò Áóöáëćßáò' ôüôć èá "
-"áđïóôĘëëïíôáé ćéäïđïéȚóćéò áóöáëćßáò óôïí śńȚóôç (üíïìá śńȚóôç\n"
-" Ț çëćêôńïíéêü ìȚíőìá)"
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
"\n"
+" Linux\n"
"\n"
"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
-msgstr ""
+" óçìáíôéêü\n"
"\n"
"\n"
"\n"
-"Óçìćßùóç: Áí Ęśćôć êÜńôá Țśïő ISA PnP, èá đńĘđćé íá ćêôćëĘóćôć ôï đńüăńáììá "
-"sndconfig. ÁđëÜ ăńÜűôć \"sndconfig\" óć ìéá êïíóüëá."
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
"\n"
"\n"
-"You can visit our hardware database at:\n"
"\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-"Äćí âńĘèçêć óőóêćőȚ ÊÜńôáò 'čśïő óôï ìçśÜíçìÜ óáò. Đáńáêáëț âćâáéùèćßôć üôé "
-"ç őđïóôçńéæüìćíç ÊÜńôá čśïő óáò ćßíáé óùóôÜ ôïđïèćôçìĘíç.\n"
"\n"
"\n"
-"Ìđïńćßôć íá ćđéóêćöôćßôć ôç âÜóç äćäïìĘíùí őëéêïę óôï:\n"
"\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"\n"
+"\n"
+"\n"
+" ćîőđçńćôçôȚò Ăéá ĐńïśùńçìĘíïőò\n"
+"\n"
+" LDAP NIS ÔïìĘáò Windows ÔïìĘáò\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" Œśé Äéáäßêôőï\n"
+"."
-#: ../../standalone/draksound:1
-#, c-format
-msgid "No Sound Card detected!"
-msgstr "Äćí âńĘèçêć ÊÜńôá čśïő!"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
+"\n"
+"If you do not know what to choose, stay with the default option."
+msgstr ""
+"ćđßđćäï\n"
+" ćđßđćäï\n"
+"\n"
+" Äéáäßêôőï ćđßđćäï\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" ćî' ïńéóìïę."
-#: ../../standalone/draksplash:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "%s BootSplash (%s) preview"
-msgstr "%s Đńïćđéóêüđçóç (%s)Bootsplash"
+msgid "Load from floppy"
+msgstr "Öüńôùóç áđü äéóêĘôá"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generating preview ..."
-msgstr "Äçìéïőńăßá đńïćđéóêüđçóçò ..."
+msgid "The following printer was auto-detected. "
+msgstr "Ïé đáńáêÜôù ćêôőđùôĘò âńĘèçêáí áőôüìáôá."
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "You must choose an image file first!"
-msgstr "ĐńĘđćé íá ćđéëĘîôć đńțôá ìéá ćéêüíá!"
+msgid "Boot Floppy"
+msgstr "ÄéóêĘôá Ćêêßíçóçò"
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "ProgressBar color selection"
-msgstr "ĆđéëïăȚ śńțìáôïò ăńáììȚò đńïüäïő"
+msgid "Norwegian"
+msgstr "Íïńâçăéêü"
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
-msgstr "Áőôü ôï èĘìá äćí Ęśćé áêüìá êÜđïéï bootsplash óôï %s !"
+msgid "Searching for new scanners ..."
+msgstr "Ăßíćôáé áíáæȚôçóç ăéá íĘïőò óáńùôĘò ..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "saving Bootsplash theme..."
-msgstr "áđïèȚêćőóç èĘìáôïò Bootsplash ..."
+msgid "Apache World Wide Web Server"
+msgstr "ĆîőđçńćôçôȚò Apache World Wide Web"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "choose image file"
-msgstr "ĆđéëĘîôć ìéá ćéêüíá"
+msgid "stepping of the cpu (sub model (generation) number)"
+msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "choose image"
-msgstr "ćđéëĘîôć ćéêüíá"
+msgid "select path to restore (instead of /)"
+msgstr "ćđéëĘîôć ôç èĘóç ćđáíáöïńÜò (áíôß ôïő /)"
#: ../../standalone/draksplash:1
#, c-format
msgid "Configure bootsplash picture"
msgstr "Ńęèìéóç ćéêüíáò bootsplash"
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "Make kernel message quiet by default"
-msgstr ""
-
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Display logo on Console"
-msgstr "ĆìöÜíéóç ëïăüôőđïő óôçí Êïíóüëá"
+msgid "China"
+msgstr "Êßíá"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose color"
-msgstr "ĆđéëĘîôć śńțìá"
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr ""
+" (Âćâáéùèćßôć üôé üëïé ïé ćêôőđùôĘò óáò ćßíáé óőíäćìĘíïé êáé óć "
+"ëćéôïőńăßá).\n"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Save theme"
-msgstr "AđïèȚêćőóç èĘìáôïò"
+msgid "Georgia"
+msgstr "Ăćùńăßá"
-#: ../../standalone/draksplash:1
+#: ../../standalone/printerdrake:1
#, c-format
-msgid "Preview"
-msgstr "Đńïćđéóêüđçóç"
+msgid "Reading data of installed printers..."
+msgstr "ÁíÜăíùóç äćäïìĘíùí ôùí ćăêáôćóôçìĘíùí ćêôőđùôțí..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "the color of the progress bar"
-msgstr "Ôï śńțìá ôçò ăńáììȚò đńïüäïő"
+msgid " Erase Now "
+msgstr "ÓâȚóéìï Ôțńá "
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "the height of the progress bar"
-msgstr "ôï ęűïò ôçò ăńáììȚò đńïüäïő"
+msgid "server"
+msgstr "ćîőđçńćôçôȚò"
-#: ../../standalone/draksplash:1
+#: ../../install_any.pm:1
#, c-format
-msgid "the width of the progress bar"
-msgstr "ôï đëÜôïò ôçò ăńáììȚò đńïüäïő"
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "ĆéóÜăćôć ìéá ìïńöïđïéçìĘíç äéóêĘôá FAT óôïí ïäçăü %s"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
+msgid "yes means the processor has an arithmetic coprocessor"
msgstr ""
-"óőíôćôáăìĘíç y ôçò ăńáììȚò đńïüäïő\n"
-"áđü ôçí ćđÜíù áńéóôćńȚ ăùíßá"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-"óőíôćôáăìĘíç y ôçò ăńáììȚò đńïüäïő\n"
-"áđü ôçí ćđÜíù áńéóôćńȚ ăùíßá"
+msgid "Please Wait... Applying the configuration"
+msgstr "Đáńáêáëț đćńéìĘíćôć... ĆöáńìïăȚ ńőèìßóćùí"
-#: ../../standalone/draksplash:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "text box height"
-msgstr "ęűïò đëáéóßïő êćéìĘíïő"
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Welcome to GRUB the operating system chooser!"
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "text width"
-msgstr "đëÜôïò êćéìĘíïő"
+msgid "Grub"
+msgstr "Grub"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"óőíôćôáăìĘíç y ôïő đëáéóßïő êćéìĘíïő\n"
-"óć áńéèìü śáńáêôȚńùí"
+msgid "SCSI controllers"
+msgstr "ćëćăêôĘò SCSI"
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"óőíôćôáăìĘíç x ôïő đëáéóßïő êćéìĘíïő\n"
-"óć áńéèìü śáńáêôȚńùí"
+msgid " on LPD server \"%s\", printer \"%s\""
+msgstr "óôïí ćîőđçńćôçôȚ LPD \"%s\", óôïí ćêôőđùôȚ \"%s\""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
#, c-format
-msgid "Browse"
-msgstr "ÁíáæȚôçóç"
+msgid "Choosing a display manager"
+msgstr "ĆđéëĘăïíôáò Ęíáí äéáśćéńéóôȚ đńïâïëȚò"
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Theme name"
-msgstr "Œíïìá èĘìáôïò"
+msgid "Zeroconf Host name"
+msgstr "Äéêôőáêü Œíïìá Zeroconf"
-#: ../../standalone/draksplash:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "final resolution"
-msgstr "ôćëéêȚ áíÜëőóç"
+msgid "IP address should be in format 1.2.3.4"
+msgstr "Ç IP äéćęèőíóç đńĘđćé íá ćßíáé óć ìïńöȚ 1.2.3.4"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "first step creation"
-msgstr "đńțôï âȚìá äçìéïőńăßáò"
+msgid "Ecuador"
+msgstr "Éóçìćńéíüò"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
-"ôï đáêĘôï 'ImageMagick' ćßíáé áđáńáßôçôï ăéá ôçí ïëïêëȚńùóç ôçò ńęèìéóçò.\n"
-"ÊÜíôć êëéê óôï \"ĆíôÜîćé\" ăéá íá ćăêáôáóôȚóćôć ôï Ț \"¶êőńï\" ăéá Ęîïäï"
+msgid "Add an item"
+msgstr "ĐńïóèȚêç óôïéśćßïő"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+msgid "The printers on this machine are available to other computers"
msgstr ""
-"Äćí âńĘèçêć êÜńôá ôçëćüńáóçò óôï ìçśÜíçìÜ óáò.Đáńáêáëț âćâáéùèćßôć üôé ìéá "
-"őđïóôçńéæüìćíç êÜńôá óôï Linux ćßíáé óőíäćìĘíç.\n"
-"\n"
-"\n"
-"Ìđïńćßôć íá ćđéóêćöôćßôć ôçí âÜóç äćäïìĘíùí óôï: \n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"Ïé ćêôőđùôĘò óć áőôü ôï ìçśÜíçìá ćßíáé äéáèĘóéìïé óć Üëëïőò őđïëïăéóôĘò"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "No TV Card detected!"
-msgstr "Äćí âńĘèçêć êÜńôá ôçëćüńáóçò!"
+msgid "I can't find needed image file `%s'."
+msgstr "Äćí ìđïńț íá âńù ôï áđáńáßôçôï áńśćßï ćéêüíáò `%s'."
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "Ôțńá ìđïńćßôć íá ćêôćëĘóćôć ôï xawtv (ìĘóá áđü ôá Ś Window!) !\n"
+msgid "No sound card detected. Try \"harddrake\" after installation"
+msgstr ""
+"Äćí âńĘèçêć êÜńôá Țśïő. ÄïêéìÜóôć ôï \"harddrake\" ìćôÜ ôçí ćăêáôÜóôáóç"
-#: ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Have a nice day!"
-msgstr "ÊáëȚ óáò ìĘńá!"
+msgid ""
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
+msgstr ""
+"Äüèçêć Üêőńç èȚńá: %s.\n"
+"Ôï óùóôü öïńìÜ ćßíáé \"èęńá/tcp\" Ț \"èęńá/udp\", \n"
+"üđïő èȚńá ćßíáé ćßíáé áńéèìüò ìćôáîę 1 êáé 65535."
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "XawTV isn't installed!"
-msgstr "Ôï XawTV ćăêáôáóôÜèçêć!"
+msgid "Shell"
+msgstr "Öëïéüò (shell)"
-#: ../../standalone/drakxtv:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "ĐńïêëȚèçêć óöÜëìá êáôÜ ôçí áíáæȚôçóç óôáèìțí ôçëćüńáóçò"
+msgid "PCI"
+msgstr "PCI"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Scanning for TV channels"
-msgstr "ÁíáæȚôçóç óôáèìțí ôçëćüńáóçò"
+msgid "Sao Tome and Principe"
+msgstr "ÓÜï Ôüìć êáé Đńßíôóéđć"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Scanning for TV channels in progress ..."
-msgstr "Ăßíćôáé áíáæȚôçóç óôáèìțí ôçëćüńáóçò ..."
+msgid "Can't login using username %s (bad password?)"
+msgstr "Áäőíáìßá đńïóđĘëáóçò ìć ôï üíïìá śńȚóôç %s (ëÜèïò êùäéêüò)"
-#: ../../standalone/drakxtv:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Area:"
-msgstr "ĐćńéïśȚ:"
+msgid "Azerbaidjani (latin)"
+msgstr "ÁæćńìđáúôæÜí (Ëáôéíéêü)"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "TV norm:"
-msgstr ""
+msgid "Package not installed"
+msgstr "Ôï đáêĘôï äćí ćßíáé ćăêáôćóôçìĘíï"
-#: ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
+msgid "Become a MandrakeExpert"
+msgstr "Ăßíćôć MandrakeExpert"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Australian Optus cable TV"
-msgstr "ÊáëùäéáêȚ ôçëćüńáóç Optus ôçò Áőóôńáëßáò"
+msgid "American Samoa"
+msgstr "ÁìćńéêáíéêȚ Óáìüá"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Newzealand"
-msgstr "ÍĘá Æçëáíäßá"
+msgid "Protocol"
+msgstr "Đńùôüêïëëï"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "France [SECAM]"
-msgstr "Ăáëëßá [SECAM]"
+msgid "Copy fonts on your system"
+msgstr "ÁíôéăńáöȚ ăńáììáôïóćéńțí óôï óęóôçìÜ óáò"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "East Europe"
-msgstr "ÁíáôïëéêȚ Ćőńțđç"
+msgid "Harddrake help"
+msgstr "ÂïȚèćéá Harddrake"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "West Europe"
-msgstr "ÄőôéêȚ Ćőńțđç"
+msgid "Bogomips"
+msgstr "Bogomips"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "China (broadcast)"
-msgstr "Êßíá (ćíáĘńéá)"
+msgid "Mandrake Terminal Server Configuration"
+msgstr "Ńęèìéóç ôïő ÄéáêïìéóôȚ Ôćńìáôéêïę Mandrake"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Japan (cable)"
-msgstr "Éáđùíßá (ÊáëùäéáêȚ)"
+msgid ""
+"\n"
+" DrakBackup Report Details\n"
+"\n"
+"\n"
+msgstr ""
+"\n"
+" DrakBackup ËćđôïìĘńćéćò ÁíáöïńÜò\n"
+"\n"
+"\n"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Japan (broadcast)"
-msgstr "Éáđùíßá (ćíáĘńéá)"
+msgid "Restore all backups"
+msgstr "ĆđáíáöïńÜ üëùí ôùí áíôéăńÜöùí áóöáëćßáò"
-#: ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Canada (cable)"
-msgstr "Êáíáäéêü (ÊáëùäéáêȚ)"
+msgid "if set to yes, check open ports."
+msgstr "áí ïńéóôćß íáé, Ęëćăśïò ăéá áíïéśôĘò èęńćò."
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "USA (cable-hrc)"
-msgstr ""
+msgid "This may take a moment to erase the media."
+msgstr "șóùò śńćéáóôïęí ìćńéêÜ ëćđôÜ ăéá íá óâçóôćß ôï ìĘóï."
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "USA (cable)"
-msgstr "USA (êáëùäéáêȚ)"
+msgid "You can't select/unselect this package"
+msgstr "Äćí ìđïńćßôć íá ćđéëĘîćôć/áđïćđéëĘîćôć áőôü ôï đáêĘôï"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "USA (broadcast)"
-msgstr "USA (ćíáĘńéá)"
+msgid "Warning"
+msgstr "ĐńïóïśȚ"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"XawTV isn't installed!\n"
-"\n"
"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
+"- Other Files:\n"
msgstr ""
-"Ôï XawTV äćí ćßíáé ćăêáôćóôçìĘíï!\n"
-"\n"
-"\n"
-"Áí Ęśćôć êÜńôá Ôçëćüńáóçò áëëÜ ôï DrakX äćí ôçí âńȚêć (śùńßò bttv\n"
-"module óôï \"/etc/modules\") êáé äćí ćăêáôĘóôçóć ïęôć ôï xawtv, đáńáêáëț\n"
-"óôćßëôć ôá áđïôĘëćóìá ôïő \"lspcidrake -v -f\" óôï \"install\\@mandrakesoft."
-"com\"\n"
-"ìć èĘìá \"undetected TV card\".\n"
-"\n"
"\n"
-"Ìđïńćßôć íá ćăêáôáóôȚóćôć ôï xawtv ìć ôçí ćíôïëȚ \"urpmi xawtv\" óáí\n"
-"root, áđü ôçí êïíóüëá."
+"- ¶ëëá Áńśćßá:\n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "primary"
-msgstr "đńùôćęïőóá"
+msgid "Remote host name"
+msgstr "ÁđïìáêńőóìĘíï äéêôőáêü üíïìá"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "secondary"
-msgstr "äćőôćńćęïőóá"
+msgid "deactivate now"
+msgstr "áđćíćńăïđïßçóç ôțńá"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
-msgstr ""
-"ÊÜíôć êëéê óć ìéá óőóêćőȚ óôï áńéóôćńü ôìȚìá ăéá íá äćßôć ćäț ôéò "
-"đëçńïöïńßćò."
+msgid "access to X programs"
+msgstr "đńüóâáóç óć đńïăńÜììáôá Ś"
-#: ../../standalone/harddrake2:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Unknown"
-msgstr "¶ăíùóôï"
+msgid "Computing the size of the Windows partition"
+msgstr "Őđïëïăßæćôáé ôï ìĘăćèïò ôçò êáôÜôìçóçò ôùí Windows"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "unknown"
-msgstr "¶ăíùóôï"
+msgid "Italy"
+msgstr "Éôáëßá"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Running \"%s\" ..."
-msgstr "ĆêôĘëćóç ôïő \"%s\"..."
+msgid "Name of printer"
+msgstr "Œíïìá ćêôőđùôȚ"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Run config tool"
-msgstr "ĆêôĘëćóç ćńăáëćßï ńęèìéóçò"
+msgid "disable"
+msgstr "áđćíćńăïđïßçóç"
-#: ../../standalone/harddrake2:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "Configure module"
-msgstr "Ńęèìéóç áńèńțìáôïò"
+msgid "error unmounting %s: %s"
+msgstr "óöÜëìá êáôÜ ôçí áđïóęíäćóç ôïő %s: %s"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Information"
-msgstr "Đëçńïöïńßćò"
+msgid "Do it!"
+msgstr "Êáí' ôï!"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Detected hardware"
-msgstr "Őëéêü đïő áíéśíćęèçêć"
+msgid "Cayman Islands"
+msgstr "ÍȚóïé ÊĘőìáí"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Harddrake2 version "
-msgstr "žêäïóç Harddrake2 "
+msgid "%s not responding"
+msgstr "ôï %s äćí áíôáđïêńßíćôáé"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detection in progress"
-msgstr "Áíßśíćőóç óć ćîĘëéîç"
+msgid "Select model manually"
+msgstr "ĆđéëĘîôć ôï ìïíôĘëï śćéńïêßíçôá"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Author:"
-msgstr "Äçìéïőńăüò:"
+msgid "Format"
+msgstr "Ìïńöïđïßçóç"
-#: ../../standalone/harddrake2:1
+#: ../../network/adsl.pm:1
#, c-format
msgid ""
-"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
msgstr ""
-"Áőôü ćßíáé ôï HardDrake, Ęíá ćńăáëćßï ńęèìéóçò ôçò Mandrake\n"
-"žêäïóç:"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "About Harddrake"
-msgstr "ÓśćôéêÜ ìć ôï Harddrake"
+"Ï đéï êïéíüò ôńüđïò óęíäćóçò adsl ćßíáé pppoe.\n"
+"ÏńéóìĘíćò óőíäĘóćéò śńçóéìïđïéïęí pptp, êÜđïéćò ëßăćò dhcp.\n"
+"ĆÜí äćí îĘńćôć, ćđéëĘîôć 'śńȚóç pppoe'"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "/_About..."
-msgstr "/_ÓśćôéêÜ ìć..."
+msgid "Various"
+msgstr "ÄéÜöïńá"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "/_Report Bug"
-msgstr "/_ÁíáöïńÜ Bug"
+msgid "Zip"
+msgstr "Zip"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"\n"
+"\n"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
msgstr ""
-"Ìüëéò ćđéëĘîćôć ìéá óőóêćőȚ, èá ìđïńćßôć íá äćßôć ôéò đëçńïöïńßćò óć đćäßá "
-"đïő ćìöáíßæïíôáé óôï äćîß ôìȚìá ìć üíïìá(\"Đëçńïöïńßćò\")"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Select a device !"
-msgstr "ĆđéëĘîôć ìéá óőóêćőȚ !"
+"\n"
+"\n"
+"Ôï Printerdrake äćí ìđüńćóć íá êáèïńßóćé ôï ìïíôĘëï ôïő ćêôőđùôȚ %s. "
+"Đáńáêáëț ćđéëĘîôć ôï óùóôü ìïíôĘëï áđü ôç ëßóôá."
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Description of the fields:\n"
"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
msgstr ""
-"ĐćńéăńáöȚ ôùí đćäßùí:\n"
"\n"
+"ĆđéëĘîôć ôïőò ćêôőđùôĘò đïő èĘëćôć íá ìćôáöĘńćôć êáé êÜíôć\n"
+"êëéê óôï \"ÌćôáöïńÜ\"."
-#: ../../standalone/harddrake2:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Harddrake help"
-msgstr "ÂïȚèćéá Harddrake"
+msgid "PDQ"
+msgstr "PDQ"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "/_Fields description"
-msgstr "/_ĐćńéăńáöȚ Đćäßùí"
+msgid "Albanian"
+msgstr "Áëâáíéêü"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "/_Help"
-msgstr "/_ÂïȚèćéá"
+msgid "Lithuania"
+msgstr "Ëéèïőáíßá"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "/_Quit"
-msgstr "/_žîïäïò"
+msgid "Compact"
+msgstr "ÓőìđáăȚò"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "/Ćíôïđéóìüò _ïäçățí jazz"
+msgid "Detected model: %s %s"
+msgstr "ÂńĘèçêć ôï ìïíôĘëï: %s %s"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "/Autodetect _modems"
-msgstr "/Ćíôïđéóìüò _ìüíôćì"
+msgid "MandrakeSoft has selected the best software for you"
+msgstr ""
#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid ""
+"This is HardDrake, a Mandrake hardware configuration tool.\n"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
+msgstr ""
+"Áőôü ćßíáé ôï HardDrake, Ęíá ćńăáëćßï ńęèìéóçò ôçò Mandrake\n"
+"žêäïóç:"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "/Autodetect _printers"
-msgstr "/Ćíôïđéóìüò _ćêôőđùôțí"
+msgid "Local files"
+msgstr "ÔïđéêÜ áńśćßá"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "/_Options"
-msgstr "/_ĆđéëïăĘò"
+msgid "maybe"
+msgstr "ßóùò"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "the vendor name of the processor"
-msgstr "ôï üíïìá êáôáóêćőáóôȚ ôïő ćđćîćńăáóôȚ"
+msgid "Panama"
+msgstr "ĐáíáìÜò"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
+#, fuzzy, c-format
+msgid ""
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
+msgstr ""
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" Ïëïêëçńțèçêć?"
+
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "the vendor name of the device"
-msgstr "ôï üíïìá êáôáóêćőáóôȚ ôçò óőóêćőȚò"
+msgid "Monitor"
+msgstr "Ïèüíç"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
+"ÔïìĘáò Windows ÔïìĘáò Windows ćîőđçńćôçôȚò śńȚóôçò\n"
+"\n"
+" ÔïìĘáò Windows ćîőđçńćôçôȚò\n"
+"\n"
+" ÔïìĘáò Windows ćîőđçńćôçôȚò Ïëïêëçńțèçêć\n"
+"\n"
+" ÔïìĘáò Windows ćîőđçńćôçôȚò LPD Printerdrake\n"
+
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "Ï ôęđïò ôçò èęńá óôçí ïđïßá ćßíáé óőíäćäćìĘíï ôï đïíôßêé óáò."
+msgid "65 thousand colors (16 bits)"
+msgstr "65 śéëéÜäćò śńțìáôá (16 bits)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
msgstr ""
+"\n"
+"- ÁđïèȚêćőóç óôïí óêëçńü äßóêï óôçí èĘóç: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Model stepping"
-msgstr "ÌïíôĘëï âçìáôéóìïę"
+msgid "Size: %d KB\n"
+msgstr "ÌĘăćèïò: %d KB\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "the number of the processor"
-msgstr "Ï áńéèìüò ôïő ćđćîćńăáóôȚ"
+msgid "Remove fonts on your system"
+msgstr "Áöáßńćóç ăńáììáôïóćéńțí áđü ôï óęóôçìÜ óáò"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Processor ID"
-msgstr "Ôáőôüôçôá ćđćîćńăáóôȚ"
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
+msgstr ""
+"Đńïćéäïđïßçóç, ï đńïóáńìïăĘáò äéêôęïő (%s) Ęśćé Țäç ńęèìéóç\n"
+"\n"
+"ÈĘëćôć íá îáíáńőèìéóôćß áőôüìáôá ;\n"
+"\n"
+"Ìđïńćßôć íá ôï êÜíćôć êáé ìüíïé óáò áëëÜ đńĘđćé íá îĘńćôć ôé êÜíćôć."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "network printer port"
-msgstr "èęńá ćêôőđùôȚ äéêôęïő"
+msgid "Graphical interface at startup"
+msgstr "Ăńáöéêü đćńéâÜëëïí óôçí ćêêßíçóç"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "the name of the CPU"
-msgstr "ôï üíïìá êáôáóêćőáóôȚ ôïő ćđćîćńăáóôȚ"
+msgid "Please enter the directory to save:"
+msgstr "Đáńáêáëț ïńßóôć ôïí êáôÜëïăï áđïèȚêćőóçò: "
#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Name"
-msgstr "Œíïìá"
+#, fuzzy, c-format
+msgid "format of floppies supported by the drive"
+msgstr "ÖïńìÜ ăéá äéóêĘôćò đïő ìđïńćß íá äćśôćß ï ïäçăüò"
-#: ../../standalone/harddrake2:1
+#: ../../raid.pm:1
#, c-format
-msgid "the number of buttons the mouse has"
-msgstr "Ï áńéèìüò ôùí đëȚêôńùí ôïő đïíôéêéïę"
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "Äćí őđÜńśïőí áńêćôĘò êáôáôìȚóćéò ăéá RAID ćđéđĘäïő %d\n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Number of buttons"
-msgstr "Áńéèìüò đëȚêôńùí"
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
+msgstr ""
+"Oé đáńáêÜôù ćêôőđùôĘò Ęśïőí ńőèìéóôćß. ÊÜíôć äéđëü êëéê óć Ęíáí ćêôőđùôȚ ăéá "
+"íá áëëÜîćôć ôéò ńőèìßóćéò ôïő, íá ôïí ïńßóćôć ùò đńïćđéëćăìĘíï Ț ăéá íá "
+"đńïâÜëćôć đëçńïöïńßćò ăéá áőôüí."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Official vendor name of the cpu"
-msgstr "Ôï ćđßóçìï üíïìá êáôáóêćőáóôȚ ôïő ćđćîćńăáóôȚ"
+msgid "Connected"
+msgstr "ÓőíäĘèçêć"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Model name"
-msgstr "Œíïìá ìïíôĘëïő"
+msgid "USB printer \\#%s"
+msgstr "ćêôőđùôȚò USB \\#%s"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
-msgstr "ĂćíéÜ ôïő ćđćîćńăáóôȚ (đ.ś. 8 ăéá PentiumIII, ...)"
+msgid "Macedonian"
+msgstr "Ìáêćäïíéêü Đ.Ă Ä."
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Model"
-msgstr "ÌïíôĘëï"
+msgid "Bridges and system controllers"
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "hard disk model"
-msgstr "ìïíôĘëï óêëçńïę äßóêïő"
+msgid "/File/_Save"
+msgstr "Áńśćßï/Áđï_èȚêćőóç"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "class of hardware device"
-msgstr "êëÜóç ôçò óőóêćőȚò "
+msgid "Mali"
+msgstr "ÌÜëé"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Media class"
-msgstr "ÊëÜóç ÌĘóïő"
+msgid "No details"
+msgstr "Śùńßò ëćđôïìĘńćéćò"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Sub generation of the cpu"
-msgstr "Sub"
+#: ../../pkgs.pm:1
+#, c-format
+msgid "very nice"
+msgstr "đïëę êáëü"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Level"
-msgstr "Ćđßđćäï"
+msgid "Preview"
+msgstr "Đńïćđéóêüđçóç"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Format of floppies supported by the drive"
-msgstr ""
+msgid "Remote Control"
+msgstr "ÁđïìáêńőóìĘíïò žëćăśïò"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Floppy format"
-msgstr "ÖïńìÜ ÄéóêĘôáò"
+msgid "Please select media for backup..."
+msgstr "Đáńáêáëț ćđéëĘîôć ôï ìĘóï ăéá ôá áíôßăńáöá áóöáëćßáò..."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
-msgstr ""
+msgid "XFree86 server: %s\n"
+msgstr "ĆîőđçńćôçôȚò XFree86: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Allow Thin Clients"
+msgstr "ĐńïóèȚêç/Áöáßńćóç Đćëáôțí"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "Halt bug"
-msgstr ""
+msgid "Georgian (\"Russian\" layout)"
+msgstr "Ăćùńăßá (\"Ńțóéêç\" äéÜôáîç)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
+msgid "/_Options"
+msgstr "/_ĆđéëïăĘò"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "F00f bug"
-msgstr "ÓöÜëìá F00f"
+msgid "Your printer model"
+msgstr "Ôï ìïíôĘëï ćêôőđùôȚ óáò"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgid ""
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
msgstr ""
+"\n"
+"\n"
+"(ĐńïóïśȚ!:ÊÜíćôć śńȚóç ôïő XFS óôçí êáôÜôìçóç root\n"
+"ç äçìéïőńăßá äéóêĘôá ćêêßíçóçò ìćăĘèïőò 1.44 Mb ìÜëëïí èá áđïôęśćé,\n"
+"ćđćéäȚ ôï XFS śńćéÜæćôáé đïëę ìćăÜëïőò ïäçăïęò.)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Whether the FPU has an irq vector"
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
msgstr ""
+"\n"
+"- ÄéáăńáöȚ áńśćßùí tar áđü ôïí äßóêï ìćôÜ ôï áíôßăńáöï áóöáëćßáò.\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
msgstr ""
+"Äćí âńĘèçêáí ćéêüíćò CD Ț DVD, đáńáêáëț áíôéăńÜűôć ôï đńüăńáììá ćăêáôÜóôáóçò "
+"êáé ôá áńśćßá rpm."
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Is FPU present"
-msgstr "Ôï FPU ćßíáé đáńüí"
+#: ../../share/advertising/04-configuration.pl:1
+#, fuzzy, c-format
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "Ńęèìéóç ôïő ÄéáêïìéóôȚ Ôćńìáôéêïę Mandrake"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
-msgstr ""
+msgid "Save"
+msgstr "ÁđïèȚêćőóç"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Fdiv bug"
-msgstr "ÓöÜëìá Fdiv"
+msgid "The %s is unsupported"
+msgstr "Ôï %s äćí őđïóôçńßæćôáé"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr ""
+msgid "Load the drivers for your usb devices."
+msgstr "Öüńôùóç ôùí ïäçățí ăéá ôéò usb óőóêćőĘò óáò."
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Flags"
-msgstr ""
+msgid "Disk"
+msgstr "Äßóêïò"
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr "ôï Üńèńùìá ôïő đőńȚíá GNU/Linux đïő śćéńßæćôáé ôçí óőóêćőȚ"
+msgid "Enter a printer device URI"
+msgstr "ĆéóÜăćôć óőóêćőȚ ćêôőđùôȚ URI"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/01-thanks.pl:1
+#, fuzzy, c-format
+msgid ""
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
+msgstr "íĘï Linux"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Module"
-msgstr "¶ńèńùìá"
+msgid "Israel"
+msgstr "ÉóńáȚë"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr "äçìéïőńăȚèçêć íĘá äőíáìéêȚ óőóêćőȚ áđü ôïí êćíôńéêü đőńȚíá devfs"
+msgid "French Guiana"
+msgstr "ĂáëëéêȚ ĂïőéÜíá"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "New devfs device"
-msgstr "ÍĘá óőóêćőȚ devfs"
+msgid "default:LTR"
+msgstr "default:LTR"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "old static device name used in dev package"
-msgstr "đáëáéÜ óôáôéêȚ üíïìá óőóêćőȚò ôïő đáêĘôïő dev"
+msgid "add a rule"
+msgstr "ĐńïóèȚêç ćíüò êáíüíá"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "A command line must be entered!"
+msgstr "žíá óùóôü URI đńĘđćé íá ćéóáśèćß!"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Old device file"
-msgstr "Đáëáéü áńśćßï óőóêćőȚò"
+msgid "Select user manually"
+msgstr "ĆđéëïăȚ śńȚóôç śćéńïêßíçôá"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This field describes the device"
-msgstr "Áőôü đćäßï đćńéăńáöȚ ôç óőóêćőȚ"
+msgid "Transfer printer configuration"
+msgstr "ÌćôáöïńÜ ńőèìßóćùí ćêôőđùôȚ"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "ÈĘëćôć íá ćíćńăïđïéȚóćôć ôçí ćêôęđùóç óôïőò đáńáđÜíù ćêôőđùôĘò ;\n"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
msgstr ""
+"ÔïìĘáò Windows ćîőđçńćôçôȚò\n"
+" ÔïìĘáò ÔïìĘáò Windows \n"
+"\n"
+" ÔïìĘáò Windows ÔïìĘáò Œíïìá śńȚóôç Êùäéêüò Đńüóâáóçò\n"
+"."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Frequency (MHz)"
-msgstr "Óőśíüôçôá (MHz)"
+msgid "%s (Port %s)"
+msgstr "%s (Èęńá %s)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
-msgstr "Ćđßđćäï đëçńïöïńéțí đïő ìđïńïęí íá âńćèïęí ìĘóù ôùí ćíôïëțí cpuid"
+msgid "Use network connection to backup"
+msgstr "ŚńȚóç óęíäćóç äéêôęïő ăéá ôá áńśćßá áóöáëćßáò"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Cpuid level"
-msgstr "Ćđßđćäï Cpuid"
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
+msgstr ""
+"\n"
+"\n"
+" śńȚóôçò ćđßđćäï."
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
+"\n"
+" Linux\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" Linux\n"
+"\n"
+"\n"
+" Óôáèìüò Ćńăáóßáò\n"
+" ÁíÜđôőîç\n"
+"\n"
+" Óôáèìüò Ćńăáóßáò\n"
+"\n"
+"\n"
+"\n"
+" ÁíÜđôőîç\n"
+"\n"
+"\n"
+" ĆîőđçńćôçôȚò ćîőđçńćôçôȚò\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" Ìćôáêßíçóç óć ćîĘëéîç ÏìÜäá ćńăáóßáò:\n"
+" ÏìÜäá ćńăáóßáò:\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" ćîőđçńćôçôȚò\n"
+"\n"
+"\n"
+" Linux\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" ÁíáâÜèìéóç\n"
+" íĘï\n"
+"."
+
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
-msgstr "ÏéêïăĘíćéá ôïő ćđćîćńăáóôȚ (đ.ś. 6 ăéá êëÜóç i686)"
+msgid "Accept user"
+msgstr "ÁđïäïśȚ śńȚóôç"
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, c-format
-msgid "Cpuid family"
-msgstr "ÏéêïăĘíćéá Cpuid"
+msgid "Server"
+msgstr "ĆîőđçńćôçôȚò"
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr "Áí áőôȚ ç óőóêćőȚ Ęśćé ôï óöÜëìá Cyrix 6x86 Coma"
+msgid "Bad choice, try again\n"
+msgstr "ÊáêȚ ćđéëïăȚ, îáíáäïêéìÜóôć\n"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Coma bug"
-msgstr "ÓöÜëìá Coma"
+msgid "Heard and McDonald Islands"
+msgstr "Íçóß Śćńíô êáé ÍȚóïé ÌáêÍôüíáëíô"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
+msgid "No alternative driver"
+msgstr "ÊáíĘíáò ćíáëëáêôéêüò ïäçăüò"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Drive capacity"
-msgstr ""
+msgid "Toggle to expert mode"
+msgstr "ÁëëáăȚ óć đńïśùńçìĘíï ôńüđï ëćéôïőńăßáò"
-#: ../../standalone/harddrake2:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Size of the (second level) cpu cache"
-msgstr "ÌĘăćèïò ôçò (äćőôĘńïő ćđéđĘäïő) cpu cache"
+msgid "(on this machine)"
+msgstr "(óć áőôü ôï ìçśÜíçìá)"
-#: ../../standalone/harddrake2:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Cache size"
-msgstr "ìĘăćèïò Cache"
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "Ç IP äéćęèőíóç ôçò đęëçò đńĘđćé íá ćßíáé ôçò ìïńöȚò 1.2.3.4"
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
#, c-format
msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+"\"%s\" based winmodem detected, do you want to install needed software ?"
msgstr ""
-"- óőóêćőĘò pci: äßíćé ôç èęńá PCI, ôç óőóêćőȚ êáé ëćéôïőńăßá áőôȚò ôçò "
-"êÜńôáò\n"
-"- óőóêćőĘò eide: ç óőóêćőȚ ćßíáé óőóêćőȚ slave Ț master\n"
-"- óőóêćőĘò scsi: ï äßáőëïò scsi êáé ôá śáńáêôçńéóôéêÜ ôçò óőóêćőȚò scsi"
+"âńĘèçêć Ęíá \"%s\" winmodem, èĘëćôć íá ćăêáôáóôȚóćôć ôï áđáńáßôçôï "
+"ëïăéóìéêü ;"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Location on the bus"
-msgstr "ÈĘóç ôïő äéáęëïő"
+msgid "Looking at packages already installed..."
+msgstr "ŰÜśíù ăéá Țäç ćăêáôćóôçìĘíá đáêĘôá..."
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
-msgstr "PCI óőóêćőȚ PCI"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use Differential Backups"
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Bus identification"
-msgstr "Áíáăíùńéóôéêü èęńáò"
+msgid "Driver"
+msgstr "Ïäçăüò"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
msgstr ""
+"Ôï Linuxconf êáìéÜ öïńÜ êÜíćé äéÜöïńćò ćńăáóßćò\n"
+"êáôÜ ôçí ćêêßíçóç ôïő óőóôȚìáôïò ăéá íá äéáôçńȚóćé ôç ńęèìéóç ôïő óőóôȚìáôïò."
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Bogomips"
-msgstr "Bogomips"
-
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "ÊáíÜëé EIDE/SCSI"
+msgid "Printer on remote lpd server"
+msgstr "ÁđïìáêńőóìĘíïò ćêôőđùôȚò óć ćîőđçńćôçôȚ lpd"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Channel"
-msgstr "ÊáíÜëé"
+msgid ""
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
+msgstr ""
+"Đńéí ćăêáôáóôȚóćôć ôéò ăńáììáôïóćéńĘò, âćâáéùèćßôć üôé Ęśćôć ôï äéêáßùìá íá "
+"êÜíćôć śńȚóç áőôțí ôùí ăńáììáôïóćéńțí êáèțò êáé íá ôéò ćăêáôáóôȚóćôć óôïí "
+"őđïëïăéóôȚ óáò\n"
+"\n"
+"-Ìđïńćßôć íá ćăêáôáóôȚóćôć ôéò ăńáììáôïóćéńĘò êáíïíéêÜ. Óć óđÜíéćò "
+"đćńéđôțóćéò, ćéêïíéêĘò ăńáììáôïóćéńĘò ìđïńïęí íá đáățóïőí ôïí ćîőđçńćôçôȚ Ś."
-#: ../../standalone/harddrake2:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
msgstr ""
-"áőôȚ ćßíáé ç öőóéêȚ èĘóç óôçí ïđïßá ćßíáé óőíäćìĘíç ç óőóêćőȚ (đ.ś.PCI, "
-"USB, ...)"
+"Yaboot\n"
+" Linux\n"
+" áíéśíćęèçêć\n"
+"\n"
+"\n"
+"\n"
+" Yaboot\n"
+"\n"
+" áđëü\n"
+"\n"
+" Root\n"
+" Linux\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" Linux\n"
+"\n"
+" Root\n"
+" Linux\n"
+" ćî' ïńéóìïę\n"
+"\n"
+" Root\n"
+"\n"
+"\n"
+" Root\n"
+"\n"
+"\n"
+" ĐńïćđéëćăìĘíï ćî' ïńéóìïę\n"
+"."
-#: ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Bus"
-msgstr "Bus"
+msgid "No mouse"
+msgstr "Śùńßò đïíôßêé"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "ç ëßóôá ìć ćíáëëáêôéêïęò ïäçăïęò ăéá ôçí êÜńôá Țśïő óáò"
+msgid "Germany"
+msgstr "Ăćńìáíßá"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Alternative drivers"
-msgstr "Ćíáëëáêôéêïß ïäçăïß"
+msgid "Austria"
+msgstr "Áőóôńßá"
-#: ../../standalone/keyboarddrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "ÈĘëćôć ôï BackSpace íá ćđéóôńĘöćé Delete óôçí êïíóüëá;"
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr ""
+"ĆêôćëĘóôć \"sndconfig\" ìćôÜ ôçí ćăêáôÜóôáóç ăéá ôçí ńęèìéóç ôçò êÜńôáò"
-#: ../../standalone/keyboarddrake:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Đáńáêáëț ćđéëĘîôć ôçí äéÜôáîç ôïő đëçêôńïëïăßïő."
+msgid "Collapse Tree"
+msgstr "Óęìđôőîç äĘíôńïő"
-#: ../../standalone/livedrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Äćí ìđïńț íá îćêéíȚóù ôï live upgrade!!!\n"
+msgid "Auto Install Configurator"
+msgstr "Ńőèìßóćéò áőôüìáôçò ćăêáôÜóôáóçò"
-#: ../../standalone/livedrake:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Đáńáêáëț ćéóÜăćôć ôï CD ćăêáôÜóôáóçò óôïí ïäçăü óáò êáé đáôȚóôć ĆíôÜîćé .\n"
-"ĆÜí äćí ôï Ęśćôć, đáôȚóôć Áêęńùóç ăéá ôçí áđïöőăȚ äéêôőáêȚò áíáâÜèìéóçò."
+msgid "Configure networking"
+msgstr "Ńęèìéóç äéêôęïő"
-#: ../../standalone/livedrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Change Cd-Rom"
-msgstr "ÁëëáăȚ Cd-Rom"
+msgid "Where do you want to install the bootloader?"
+msgstr "Đïę èĘëćôć íá ćăêáôáóôȚóćôć ôï đńüăńáììá ćêêßíçóçò;"
-#: ../../standalone/localedrake:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
+msgstr ""
+"\n"
+"\n"
+"\n"
+"\n"
+" Ăéá ĐńïśùńçìĘíïőò\n"
+"\n"
+"\n"
+" Éóđáíßá\n"
+" ćî' ïńéóìïę Ăéá ĐńïśùńçìĘíïőò\n"
+"\n"
+"\n"
+"\n"
+" Ćđüìćíï\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" śńȚóôçò\n"
+" śńȚóôçò."
+
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr "Ç áëëáăȚ Ęăéíć, áëëÜ ăéá íá éóśęóćé èá đńĘđćé íá ăßíćé áđïóęíäćóç"
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr "Ôï %s äćí őđïóôçńßæćôáé áđü áőôȚ ôçí Ęêäïóç ôïő Mandrake Linux."
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Save as.."
-msgstr "ÁđïèȚêćőóç Ùò.."
+msgid "DHCP client"
+msgstr "đćëÜôçò DHCP"
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Please enter your email address below "
-msgstr "Đáńáêáëț ćéóÜăćôć ôçí çëćêôńïíéêȚ óáò äéćęèőíóç"
+msgid "Restoring from file %s failed: %s"
+msgstr "Ç ćđáíáöïńÜ áđü ôï áńśćßï %s áđĘôőść: %s"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "alert configuration"
-msgstr "Ńęèìéóç ćéäïđïéȚóćùí"
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech Mouse (óćéńéáêü, đáëéüò C7 ôęđïò)"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
+msgid "Are you sure that you want to set up printing on this machine?\n"
msgstr ""
-"Èá ëÜâćôć ìéá ćéäïđïßçóç ćÜí ôï öïńôßï ćßíáé ìćăáëęôćńï áđü áőôȚ ôçí ôéìȚ"
+"Ćßóôć âĘâáéïé üôé èĘëćôć íá ńőèìßóćôć ôçí ćêôęđùóç óć áőôü ôï ìçśÜíçìá;\n"
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "load setting"
-msgstr "Öüńôùóç ńőèìßóćùí"
+msgid "New devfs device"
+msgstr "ÍĘá óőóêćőȚ devfs"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
+msgid "ERROR: Cannot spawn %s."
msgstr ""
-"Èá ëÜâćôć ìéá ćéäïđïßçóç ćÜí ìéá áđü ôéò ćđéëćăìĘíćò őđçńćóßćò đÜűćé íá "
-"ćêôćëćßôáé"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "service setting"
-msgstr "Ńőèìßóćéò őđçńćóßáò"
+msgid "Boot Style Configuration"
+msgstr "Ńęèìéóç Ôęđïő Ćêêßíçóçò"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Automatic time synchronization"
+msgstr "Áőôüìáôïò óőăśńïíéóìüò țńáò (śńȚóç NTP)"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Xinetd Service"
-msgstr "Őđçńćóßá Xinetd"
+msgid "Backup files not found at %s."
+msgstr "Ôá áíôßăńáöá áóöáëćßáò äćí âńĘèçêáí óôï %s."
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Webmin Service"
-msgstr "Őđçńćóßá Webmin"
+msgid "Thank you for choosing Mandrake Linux 9.1"
+msgstr "Óáò ćőśáńéóôïęìć đïő ćđéëĘîáôć ôï Mandrake Linux 9.1"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "SSH Server"
-msgstr "ĆîőđçńćôçôȚò SSH"
+msgid "Armenian (phonetic)"
+msgstr "Áńìćíéêü (öùíçôéêü)"
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Samba Server"
-msgstr "ĆîőđçńćôçôȚò Samba"
+msgid "Card model:"
+msgstr "ÌïíôĘëï êÜńôáò:"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Thin Client"
+msgstr "ĐćëÜôçò DHCP"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Postfix Mail Server"
-msgstr "ĆîőđçńćôçôȚò Ôáśőäńïìćßïő Postfix"
+msgid "Start Server"
+msgstr "Ćêêßíçóç ĆîőđçńćôçôȚò"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ftp Server"
-msgstr "ÄéáêïìéóôȚò Ftp"
+msgid "Turkmenistan"
+msgstr "ÔïőńêìćíéóôÜí"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Domain Name Resolver"
-msgstr ""
+msgid "All remote machines"
+msgstr "Œëá ôá áđïìáêńőóìĘíá ìçśáíȚìáôá"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "ĆîőđçńćôçôȚò Apache World Wide Web"
+msgid "Install themes"
+msgstr "ĆăêáôÜóôáóç èćìÜôùí"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
msgstr ""
-"Êáëțò ïńßóáôć óôï ćńăáëćßï ńęèìéóçò ôáśőäńïìćßïő.\n"
-"\n"
-"Ćäț, èá ìđïńĘóćôć íá ńőèìßóćôć ôï óęóôçìá ćéäïđïßçóçò\n"
+"áíáâáèìßóćéò 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft."
+"com>"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "Mail alert configuration"
-msgstr "Ńęèìéóç ćéäïđïßçóçò Ôáśőäńïìćßïő"
+msgid "Espanol"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mail alert"
-msgstr "Ćéäïđïßçóç Ôáśőäńïìćßïő"
+msgid "Preparing installation"
+msgstr "Đńïćôïéìáóßá ćăêáôÜóôáóçò"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "đáńáêáëț đćńéìĘíćôć, ćđćîćńăáóßá áńśćßïő: %s"
+msgid "Edit selected host/network"
+msgstr "Ćđćîćńăáóßá ćđéëćăìĘíïő őđïëïăéóôȚ/äßêôőï"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Content of the file"
-msgstr "Đćńéćśüìćíï ôïő áńśćßïő"
+msgid "Add User -->"
+msgstr "ĐńïóèȚêç śńȚóôç -->"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Calendar"
-msgstr "Çìćńïëüăéï"
+msgid "Nauru"
+msgstr "Íáïęńïő"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Choose file"
-msgstr "ĆđéëĘîôć Ęíá áńśćßï"
+msgid "True Type fonts installation"
+msgstr "ĆăêáôÜóôáóç ăńáììáôïóćéńțí True Type"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "but not matching"
-msgstr "áëëÜ äćí ôáéńéÜæćé"
+msgid "Auto-detect printers connected directly to the local network"
+msgstr "Áőôüìáôç áíßśíćőóç ćêôőđùôțí óőíäćìĘíïé óôï ôïđéêü óáò äßêôőï"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "matching"
-msgstr "ôáéńéÜæćé"
+msgid "LAN configuration"
+msgstr "Ńęèìéóç LAN"
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Settings"
-msgstr "Ńőèìßóćéò"
+msgid "hard disk model"
+msgstr "ìïíôĘëï óêëçńïę äßóêïő"
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "A tool to monitor your logs"
-msgstr "žíá ćńăáëćßï ăéá íá âëĘđćôć ôá log óáò"
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "Äćí ìđïńćßôć íá śńçóéìïđïéȚóćôć ìéá êáôÜôìçóç LVM ăéá đńïóÜńôçóç %s"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "search"
-msgstr "áíáæȚôçóç"
+msgid "Get Windows Fonts"
+msgstr "ËȚűç Ăńáììáôïóćéńțí Windows "
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Mandrake Tools Explanation"
-msgstr "ĆđćîȚăçóç Ćńăáëćßùí ôçò Mandrake"
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Syslog"
-msgstr "Syslog"
+msgid "Iranian"
+msgstr "Éńáíéêü"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Messages"
-msgstr "Ìçíęìáôá"
+msgid "Croatia"
+msgstr "Êńïáôßá"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "User"
-msgstr "ŚńȚóôçò"
+msgid "Gateway:"
+msgstr "Đęëç äéêôęïő:"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Help/_About..."
-msgstr "/ÂïȚèćéá/_ÓśćôéêÜ ìć..."
+msgid "Add server"
+msgstr "ĐńïóèȚêç ćîőđçńćôçôȚ"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Options/Test"
-msgstr "/ĆđéëïăĘò/Ôćóô"
+msgid "Remote printer name"
+msgstr "ÁđïìáêńőóìĘíïò üíïìá ćêôőđùôȚ"
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "/File/-"
-msgstr "/Áńśćßï/-"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together in order to highly reduce hacking risks."
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "/File/Save _As"
-msgstr "/Áńśćßï/ÁđïèȚêćőóç _Ùò"
+msgid "Device: "
+msgstr "ÓőóêćőȚ: "
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, c-format
-msgid "<control>S"
-msgstr "<control>S"
+msgid "Printerdrake"
+msgstr "Printerdrake"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "/File/_Save"
-msgstr "Áńśćßï/Áđï_èȚêćőóç"
+msgid "License agreement"
+msgstr "¶äćéá śńȚóçò"
-#: ../../standalone/logdrake:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "<control>O"
-msgstr "<control>O"
+msgid "System Options"
+msgstr "ĆđéëïăĘò ÓőóôȚìáôïò"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/File/_Open"
-msgstr "/Áńśćßï/¶_íïéăìá"
+msgid "Please enter the directory where backups are stored"
+msgstr "Đáńáêáëț ćéóÜăćôć ôïí êáôÜëïăï đïő âńßóêïíôáé ôá áíôßăńáöá áóöáëćßáò"
-#: ../../standalone/logdrake:1
+#: ../../security/level.pm:1
#, c-format
-msgid "<control>N"
-msgstr "<control>N"
+msgid "Please choose the desired security level"
+msgstr "ĆđéëĘîôć ôï ćđéèőìçôü ćđßđćäï áóöáëćßáò"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "/File/_New"
-msgstr "/Áńśćßï/_ÍĘï"
+msgid "This host is already in the list, it cannot be added again.\n"
+msgstr ""
+"Ï őđïëïăéóôȚò ćßíáß Țäç óôç ëßóôá, äćí ìđïńćßôć íá ôïí đńïóèĘóćôć îáíÜ.\n"
-#: ../../standalone/logdrake:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Show only for the selected day"
-msgstr "ĆìöÜíéóç ìüíï ăéá ôçí ćđéëćăìĘíç çìĘńá"
+msgid ", USB printer"
+msgstr ", ćêôőđùôȚò USB"
-#: ../../standalone/mousedrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Emulate third button?"
-msgstr "Ćîïìïßùóç ôńßôïő đëȚêôńïő;"
+msgid "Choose the applications that will support the fonts:"
+msgstr "ĆđéëĘîôć ôéò ćöáńìïăĘò đïő èá őđïóôçńßæïőí ôéò ăńáììáôïóćéńĘò :"
-#: ../../standalone/mousedrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please choose your mouse type."
-msgstr "Đáńáêáëț ćđéëĘîôć ôęđï đïíôéêéïę."
+msgid "Configure X"
+msgstr "Ńęèìéóç Ś"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Connect %s"
-msgstr "Óęíäćóç %s"
+msgid "Turkish (traditional \"F\" model)"
+msgstr "Ôïőńêéêü (đáńáäïóéáêü \"F\" ìïíôĘëï)"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Disconnect %s"
-msgstr "Áđïóęíäćóç %s"
+msgid "Congratulations!"
+msgstr "ÓőăśáńçôȚńéá!"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"ĐńïóïśȚ áíéśíćęèçêć ìéá Üëëç óęíäćóç óôï äéáäßêôőï, đïő ßóùò śńçóéìïđïéćß ôï "
-"äßêôőü óáò"
+msgid "Use owner id for execution"
+msgstr "ŚńȚóç id êáôüśïő ăéá ćêôĘëćóç"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "received"
-msgstr "ëçöèĘíôá"
+msgid "Down"
+msgstr "ÊÜôù"
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "transmitted"
-msgstr "áđćóôáëìĘíá"
+msgid "Raw printer (No driver)"
+msgstr "ÁêáôĘńăáóôïò ćêôőđùôȚò (Śùńßò ïäçăü)"
-#: ../../standalone/net_monitor:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "received: "
-msgstr "ëçöèĘíôá:"
+msgid "Install rpm"
+msgstr "ĆăêáôÜóôáóç rpm"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "sent: "
-msgstr "áđïóôïëȚ: "
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
+msgstr ""
+"Ăéá íá ćêôőđțóćôć áđü ôç ăńáììȚ ćíôïëțí (đáńÜèőńï ôćńìáôéêïę) ìđïńćßôć íá "
+"êÜíćôć śńȚóç ôçò ćíôïëȚò \"%s <áńśćßï>\" Ț ìđïńćßôć íá êÜíćôć śńȚóç ăńáöéêïę "
+"ćńăáëćßï ćêôęđùóçò: \"xpp <áńśćßï>\" Ț \" kprinter <áńśćßï>\". Ôï ăńáöéêü "
+"ćńăáëćßï óáò ćđéôńĘđćé íá áëëÜîćôć ćęêïëá ôéò ńőèìßóćéò ćđéëïățí.\n"
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Local measure"
-msgstr "ÔïđéêȚ ìĘôńçóç"
+msgid "Time remaining "
+msgstr "ĆíáđïìĘíùí śńüíïò "
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "average"
-msgstr "ìĘóïò üńïò"
+msgid "UK keyboard"
+msgstr "ÌćăÜëç Âńćôáíßá (UK)"
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Color configuration"
-msgstr "Ńęèìéóç śńùìÜôùí"
+msgid "Unmount"
+msgstr "Áđïóęíäćóç"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
-"Ç óęíäćóç áđĘôőść.\n"
-"Ćđáëçèćęóôć ôéò ńőèìßóćéò óáò óôï ÊĘíôńï ĆëĘăśïő Mandrake."
+msgid "Uninstall Fonts"
+msgstr "ÁđćăêáôÜóôáóç Ăńáììáôïóćéńțí"
-#: ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Connection complete."
-msgstr "Ç óęíäćóç Ęăéíć."
+msgid "Microsoft Explorer"
+msgstr "Microsoft Explorer"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Disconnection from the Internet complete."
-msgstr "Ç áđïóęíäćóç áđü ôï Äéáäßêôőï ïëïêëçńțèçêć."
+msgid "German (no dead keys)"
+msgstr "Ăćńìáíéêü (śùńßò íćêńÜ đëȚêôńá)"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disconnection from the Internet failed."
-msgstr "Ç áđïóęíäćóç áđü ôï äéáäßêôőï áđĘôőść."
+msgid "Transferring %s..."
+msgstr "ÌćôáöĘńćôáé ï %s..."
-#: ../../standalone/net_monitor:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Connecting to the Internet "
-msgstr "Óęíäćóç óôï Äéáäßêôőï"
+msgid "32 thousand colors (15 bits)"
+msgstr "32 śéëéÜäćò śńțìáôá (15 bits)"
-#: ../../standalone/net_monitor:1
+#: ../../any.pm:1
#, c-format
-msgid "Disconnecting from the Internet "
-msgstr "Áđïóęíäćóç áđü ôï Äéáäßêôőï"
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
+msgstr ""
+"Ìđïńćßôć íá ăßíćé ćîáăùăȚ ìć ôçí śńȚóç NFS Ț Samba. Đáńáêáëț ćđéëĘîôć đïßï "
+"èĘëćôć."
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Đáńáêáëț đćńéìĘíćôć, äïêéìÜæćôáé ç óęíäćóç..."
+msgid "Reboot"
+msgstr "Ćđáíćêêßíçóç"
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logs"
-msgstr "Çìćńïëüăéá"
+msgid "Gambia"
+msgstr "ĂêÜìđéá"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Connection Time: "
-msgstr "żńá Óęíäćóçò: "
+msgid "Mandrake Control Center"
+msgstr "ÊĘíôńï ĆëĘăśïő Mandrake"
-#: ../../standalone/net_monitor:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Receiving Speed:"
-msgstr "Ôáśęôçôá ËȚűçò:"
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
+msgstr ""
+"Ìđïńćßôć íá ćéóÜăćôć äéÜöïńćò èȚńćò.\n"
+"žăêőńá đáńáäćßăìáôá ćßíáé: 139/tcp 139/udp.\n"
+"Äćßôć ôï /etc/services ăéá đëçńïöïńßćò."
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid "Sending Speed:"
-msgstr "Ôáśęôçôá ÁđïóôïëȚò:"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
+msgstr ""
+"Ïèüíç\n"
+"\n"
+"\n"
+"\n"
+"."
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Statistics"
-msgstr "ÓôáôéóôéêÜ"
+msgid "\t-Tape \n"
+msgstr "\t-Ôáéíßá \n"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakhelp:1
#, c-format
-msgid "Profile "
-msgstr "Đńïößë "
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
+msgstr ""
+"Äćí âńĘèçêć đćńéçăçôȚò óôï óęóôçìÜ óáò, Đáńáêáëț ćăêáôáóôȚóôć Ęíáí áí èĘëćôć "
+"íá đćńéçăçèćßôć óôï óęóôçìá âïȚèćéáò"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Network Monitoring"
-msgstr "Đáńáêïëïęèçóç Äéêôęïő"
+msgid "Remember this password"
+msgstr "Áđïìíçìüíćőóç ôïő êùäéêïę đńüóâáóçò"
-#: ../../standalone/printerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Reading data of installed printers..."
-msgstr "ÁíÜăíùóç äćäïìĘíùí ôùí ćăêáôćóôçìĘíùí ćêôőđùôțí..."
+msgid "Internet Connection Sharing is now enabled."
+msgstr "Ç ÊïéíȚ Óęíäćóç óôï Äéáäßêôőï ôțńá ćíćńăïđïéȚèçêć."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Name/IP address of host:"
-msgstr "Œíïìá/IP äéćęèőíóç ôïő őđïëïăéóôȚ:"
+msgid "\t-Network by SSH.\n"
+msgstr "\t-Äßêôőï ìĘóù SSH.\n"
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr ""
-"Ï őđïëïăéóôȚò ćßíáß Țäç óôç ëßóôá, äćí ìđïńćßôć íá ôïí đńïóèĘóćôć îáíÜ.\n"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
+msgstr "áíéśíćęèçêć śńȚóôçò."
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Scannerdrake"
-msgstr "Scannerdrake"
+msgid "Use the free space on the Windows partition"
+msgstr "ŚńȚóç ôïő ćëćęèćńïő śțńïő óôçí êáôÜôìçóç ôùí Windows"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "ĐńĘđćé íá ïńßóôć ôïí äéêôőáêü üíïìá Ț ôçí IP äéćęèőíóç.\n"
+msgid "%s found on %s, configure it automatically?"
+msgstr "Ôï %s âńĘèçêć óôï %s,íá ńőèìéóôćß áőôüìáôá;"
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
msgstr ""
-"ĆđéëĘîôć ôïí őđïëïăéóôȚ ôïő ïđïßïő ïé ôïđéêïß óáńùôĘò èá ăßíïőí äéáèĘóéìïé:"
-
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid "Sharing of local scanners"
-msgstr "ÊïéíȚ śńȚóç ôïđéêțí óáńùôțí"
-#: ../../standalone/scannerdrake:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "This machine"
-msgstr "Áőôü ôï ìçśÜíçìá"
+msgid "XFree86 driver: %s\n"
+msgstr "Ïäçăüò XFree86: %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove selected host"
-msgstr "Áöáßńćóç ćđéëćăìĘíïő őđïëïăéóôȚ"
+msgid "This host/network is already in the list, it cannot be added again.\n"
+msgstr ""
+"Áőôüò ï őđïëïăéóôȚò/äßêôőï ćßíáé Țäç óôç ëßóôá, äćí ìđïńćß íá đńïóôćèćß "
+"îáíÜ.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Edit selected host"
-msgstr "Ćđćîćńăáóßá ćđéëćăìĘíïő őđïëïăéóôȚ"
+msgid ""
+"\n"
+" DrakBackup Report \n"
+"\n"
+msgstr ""
+"\n"
+" ÁíáöïńÜ DrakBackup \n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add host"
-msgstr "ĐńïóèȚêç őđïëïăéóôȚ"
+msgid "Choose the packages you want to install"
+msgstr "ĆđéëĘîôć ôá đáêĘôá đïő èĘëćôć íá ćăêáôáóôȚóćôć"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr ""
-"ÁőôÜ ćßíáé ôá ìçśáíȚìáôá áđü üđïő ïé óáńùôĘò èá đńĘđćé íá śńçóéìïđïéçèïęí:"
+msgid "Papua New Guinea"
+msgstr "Đáđïęá-ÍĘá ĂïőúíĘá"
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Usage of remote scanners"
-msgstr "ŚńȚóç ôùí áđïìáêńőóìĘíùí óáńùôțí"
+msgid "Serbian (cyrillic)"
+msgstr "ÓĘńâéêï (êőńéëëéêü)"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "All remote machines"
-msgstr "Œëá ôá áđïìáêńőóìĘíá ìçśáíȚìáôá"
+msgid "Make kernel message quiet by default"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
msgstr ""
-"ÁőôÜ ćßíáé ôá ìçśáíȚìáôá üđïő ïé ôïđéêÜ óőíäćìĘíïé óáńùôĘò(çò) đńĘđćé íá "
-"ćßíáé äéáèĘóéìïé:"
+"ÈĘëćôć íá ïńßóćôć áőôüí ôïí ćêôőđùôȚ (\"%s\")\n"
+"óáí ôïí đńïćđéëćăìĘíï ćêôőđùôȚ;"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Use the scanners on hosts: "
-msgstr "ŚńȚóç ôùí óáńùôțí óôïőò őđïëïăéóôĘò:"
+msgid "The DHCP end range"
+msgstr "To üńéï ôćńìáôéóìïę DHCP"
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Use scanners on remote computers"
-msgstr "ŚńȚóç óáńùôțí óć áđïìáêńőóìĘíïőò őđïëïăéóôĘò"
+msgid "Creating bootdisk..."
+msgstr "Äçìéïőńăßá äßóêïő ćêêßíçóçò..."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Êïéíüśńçóôïé óáńùôĘò óôïőò őđïëïăéóôĘò: "
+msgid "Wait please, testing your connection..."
+msgstr "Đáńáêáëț đćńéìĘíćôć, äïêéìÜæćôáé ç óęíäćóç..."
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr ""
-"Ïé óáńùôĘò áőôïę ôïő ìçśáíȚìáôïò ćßíáé äéáèĘóéìïé óć Üëëïőò őđïëïăéóôĘò"
+msgid "Bringing down the network"
+msgstr "ÄéáêïđȚ ëćéôïőńăßáò äéêôęïő"
-#: ../../standalone/scannerdrake:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
-"Ćđßóçò ćäț ìđïńćßôć íá ïńßóćôć áí óáńùôĘò đïő âńßóêïíôáé óć áđïìáêńőóìĘíá "
-"ìçśáíȚìáôá èá ćßíáé äéáèĘóéìá óć áőôü ôï ìçśÜíçìá."
+msgid "Login ID"
+msgstr "'Œíïìá ŚńȚóôç"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
msgstr ""
-"Ćäț ìđïńćßôć íá ćđéëĘîćôć áí ïé óőíäćìĘíïé óáńùôĘò áőôïę ôï ìçśáíȚìáôïò èá "
-"ćßíáé đńïóâÜóéìïé áđü áđïìáêńőóìĘíá ìçśáíȚìáôá êáé áđü đïéá."
+"Ôï NFS ćßíáé Ęíá äçìïöéëĘò đńùôüêïëëï ăéá ôïí äéáìïéńáóìü áńśćßùí óć \n"
+"äßêôőá TCP/IP. ÁőôȚ ç őđçńćóßá đńïóöĘńćé ëćéôïőńăßćò êëćéäțìáôïò áńśćßùí."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Re-generating list of configured scanners ..."
-msgstr "Ćđáíáäçìéïőńăßá ëßóôáò ìć ôïőò ńőèìéóìĘíïőò óáńùôĘò ..."
+msgid "DHCP Client"
+msgstr "ĐćëÜôçò DHCP"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Searching for new scanners ..."
-msgstr "Ăßíćôáé áíáæȚôçóç ăéá íĘïőò óáńùôĘò ..."
+msgid "dismiss"
+msgstr "Üêőńï"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for configured scanners ..."
-msgstr "Ăßíćôáé áíáæȚôçóç ăéá ńőèìéóìĘíïőò óáńùôĘò ..."
+msgid "Printing/Scanning on \"%s\""
+msgstr "Ćêôęđùóç/ÓÜńùóç óôï \"%s\""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Scanner sharing"
-msgstr "ÊïéíȚ śńȚóç óáńùôțí"
+msgid "omit raid modules"
+msgstr "đáńÜëćéűç ôùí áńèńùìÜôùí raid"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
-msgid "Add a scanner manually"
-msgstr "ĐńïóèȚêç óáńùôȚ śćéńïêßíçôá"
+msgid ""
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
+msgstr ""
+"Ôï lpd ćßíáé ç őđçńćóßá ćêôőđțóćùí đïő áđáéôćßôáé ăéá íá ëćéôïőńăćß \n"
+"ç ćíôïëȚ lpd. Ćßíáé âáóéêÜ Ęíáò ćîőđçńćôçôȚò đïő đńïùèćß ôá áńśćßá \n"
+"óôïőò ćêôőđùôĘò."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Search for new scanners"
-msgstr "ÁíáæȚôçóç ăéá íĘïőò óáńùôĘò"
+msgid "Internet Connection Configuration"
+msgstr "Ńęèìéóç Óęíäćóçò Äéáäéêôęïő"
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr "Äćí âńĘèçêáí óáńùôĘò đïő íá ćßíáé äéáèĘóéìïé óôï óęóôçìÜ óáò.\n"
+msgid "comma separated numbers"
+msgstr "áńéèìïß śùńéóìĘíïé ìć êüììá"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
msgstr ""
-"Ï đáńáêÜôù óáńùôȚò\n"
-"\n"
-"%s\n"
-"ćßíáé äéáèĘóéìïò óôï óęóôçìÜ óáò\n"
+"Ìüëéò ćđéëĘîćôć ìéá óőóêćőȚ, èá ìđïńćßôć íá äćßôć ôéò đëçńïöïńßćò óć đćäßá "
+"đïő ćìöáíßæïíôáé óôï äćîß ôìȚìá ìć üíïìá(\"Đëçńïöïńßćò\")"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule up one level"
+msgstr "Ìćôáêßíçóç ôïő ćđéëćăìĘíïő êáíüíá Ęíá ćđßđćäï đÜíù"
#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"The following scanners\n"
+"The following scanner\n"
"\n"
"%s\n"
-"are available on your system.\n"
+"is available on your system.\n"
msgstr ""
-"Ïé đáńáêÜôù óáńùôĘò\n"
+"Ï đáńáêÜôù óáńùôȚò\n"
"\n"
"%s\n"
-"ćßíáé äéáèĘóéìïé óôï óęóôçìÜ óáò\n"
-
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"Ôï %s óáò Ęśćé ńőèìéóôćß. \n"
-"Ìđïńćßôć ôțńá íá óáńțóćôć Ęăăńáöá ìć ôï \"XSane\" áđü ôï ĐïëőìĘóá/ĂńáöéêÜ "
-"áđü ìćíïę ćöáńìïățí."
+"ćßíáé äéáèĘóéìïò óôï óęóôçìÜ óáò\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "choose device"
-msgstr "ĆđéëĘîôć óőóêćőȚ"
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "Ćßóôć âĘâáéïé ăéá ôçí áöáßńćóç ôïő ćêôőđùôȚ \"%s\";"
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr "Đáńáêáëț ćđéëĘîôć ôçí óőóêćőȚ óôçí ïđïßá ćßíáé óőíäćìĘíï ôï %s"
+msgid "I can't find any room for installing"
+msgstr "Äćí ìđïńț íá âńù áńêćôü śțńï ăéá ćăêáôÜóôáóç"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for scanners ..."
-msgstr "Ăßíćôáé áíáæȚôçóç ăéá óáńùôĘò ..."
+msgid "Default printer"
+msgstr "ĐńïćđéëćăìĘíïò ćêôőđùôȚò"
-#: ../../standalone/scannerdrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Auto-detect available ports"
-msgstr "ÄéáèĘóéìćò èęńćò áőôüìáôïő ćíôïđéóìïę"
+msgid ""
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
+msgstr ""
+"žśćôć ńőèìßóćé đïëëïęò ôńüđïőò ăéá íá óőíäĘćóôć óôï Äéáäßêôőï.\n"
+"ĆđéëĘîôć áőôüí đïő èĘëćôć íá śńçóéìïđïéȚóćôć.\n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr ""
-"(Óçìćßùóç: Óôéò đáńÜëëçëćò èęńćò äćí ìđïńćß íá ăßíćé áőôüìáôïò ćíôïđéóìüò)"
+msgid "Modify RAID"
+msgstr "Ôńïđïđïßçóç RAID"
-#: ../../standalone/scannerdrake:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
msgstr ""
-"Ôï %s đńĘđćé íá ńőèìéóôćß áđü ôï printerdrake.\n"
-"Ìđïńćßôć íá ćêêéíȚóćôć ôï printerdrake áđü ôï ÊĘíôńï ĆëĘăśïő Mandrake áđü ôï "
-"ôìȚìá Őëéêü."
+"Ćíôüđéóá ìéá ISDN êÜńôá, áëëÜ äćí îĘńù ôïí ôęđï ôçò. Đáńáêáëț ćđéëĘîôć ìéá "
+"êÜńôá PCI áđü ôçí đáńáêÜôù ïèüíç."
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "The %s is unsupported"
-msgstr "Ôï %s äćí őđïóôçńßæćôáé"
+msgid "Add user"
+msgstr "ĐńïóèȚêç śńȚóôç"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr "Ôï %s äćí ćßíáé ăíùóôü áđü áőôȚ ôçí Ęêäïóç ôïő Scannerdrake."
+msgid "RAID-disks %s\n"
+msgstr "Äßóêïé RAID %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
-msgstr "Ôï %s äćí őđïóôçńßæćôáé áđü áőôȚ ôçí Ęêäïóç ôïő Mandrake Linux."
+msgid "Liberia"
+msgstr "Ëéâćńßá"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Port: %s"
-msgstr "Èęńá: %s"
+msgid ""
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid ", "
-msgstr ", "
+msgid "Choose your keyboard"
+msgstr "ĆđéëĘîôć đëçêôńïëüăéï"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Detected model: %s"
-msgstr "ÂńĘèçêć ôï ìïíôĘëï: %s"
+msgid "Format partitions"
+msgstr "Ìïńöïđ. êáôáôìȚó."
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " ("
-msgstr " ("
+msgid "Automatic correction of CUPS configuration"
+msgstr "Áőôüìáôç äéüńèùóç ôçò ńęèìéóçò CUPS"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Select a scanner model"
-msgstr "ĆđéëĘîôć Ęíá ìïíôĘëï óáńùôȚ"
+msgid "Running \"%s\" ..."
+msgstr "ĆêôĘëćóç ôïő \"%s\"..."
-#: ../../standalone/scannerdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr ""
-"ôï %s äćí ćßíáé óôç âÜóç äćäïìĘíùí ôùí óáńùôțí, íá ńőèìéóôćß śćéńïêßíçôá;"
+msgid "enable radio support"
+msgstr "ćíćńăïđïßçóç ńáäéïöțíïő"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "Ôï %s âńĘèçêć óôï %s,íá ńőèìéóôćß áőôüìáôá;"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Hardware probing in progress"
-msgstr "Áíßśíćőóç őëéêïę óć ćîĘëéîç"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices were added:\n"
-msgstr "ÏńéóìĘíćò óőóêćőĘò đńïóôĘèçêáí:\n"
+msgid "Scanner sharing to hosts: "
+msgstr "Êïéíüśńçóôïé óáńùôĘò óôïőò őđïëïăéóôĘò: "
-#: ../../standalone/service_harddrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "ÏńéóìĘíćò óőóêćőĘò óôï ôìȚìá őëéêïę \"%s\" áöáéńĘèçêáí:\n"
-
-#: ../../share/advertising/01-thanks.pl:1
-#, fuzzy, c-format
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
-msgstr "íĘï Linux"
+msgid "Loopback file name: %s"
+msgstr "Œíïìá áńśćßïő loopback: %s"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Welcome to the Open Source world."
-msgstr "Êáëțò ïńßóáôć óôïí êüóìï ôïő Áíïéśôïę Êțäéêá"
+msgid "Please choose the printer to which the print jobs should go."
+msgstr ""
+"Đáńáêáëț ćđéëĘîôć ôïí ćêôőđùôȚ óôïí ïđïßï èá áđïóôĘëëïíôáé ïé ćńăáóßćò "
+"ćêôęđùóçò."
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr "Óáò ćőśáńéóôïęìć đïő ćđéëĘîáôć ôï Mandrake Linux 9.1"
+msgid "Do not transfer printers"
+msgstr "Śùńßò ìćôáöïńÜ ćêôőđùôțí"
-#: ../../share/advertising/02-community.pl:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
-msgstr "Linux"
+msgid "Delay before booting the default image"
+msgstr "ÊáèőóôĘńçóç đńéí ôçí ćêêßíçóç"
-#: ../../share/advertising/02-community.pl:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
-msgstr "ÈĘëćôć íá ìÜèćôć đćńéóóüôćńá ăéá ôçí êïéíüôçôá Áíïéśôïę Êțäéêá;"
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+" DUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
+msgstr ""
+"\n"
+"\n"
+"\n"
+"<dchaumette\\@mandrakesoft.com>\n"
+"\n"
+"\n"
+" ĂćíéêÜ ¶äćéá\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" ĂćíéêÜ ¶äćéá\n"
+"\n"
+" ëçöèĘíôá ĂćíéêÜ ¶äćéá\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" ÔïìĘáò Windows \n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
-#: ../../share/advertising/02-community.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Build the future of Linux!"
+msgid "Please check for multisession CD"
msgstr ""
-#: ../../share/advertising/03-software.pl:1
-#, fuzzy, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
-msgstr "Linux ćđćîćńăáóßá"
-
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
-msgstr ""
+msgid "user"
+msgstr "śńȚóôçò"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr ""
+msgid "Use Hard Disk to backup"
+msgstr "ŚńȚóç óêëçńïę äßóêïő ăéá ôá áíôßăńáöá áóöáëćßáò"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
+msgid "Configure"
+msgstr "Ńęèìéóç"
-#: ../../share/advertising/04-configuration.pl:1
-#, fuzzy, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "Ńęèìéóç ôïő ÄéáêïìéóôȚ Ôćńìáôéêïę Mandrake"
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Scannerdrake"
+msgstr "Scannerdrake"
-#: ../../share/advertising/05-desktop.pl:1
-#, fuzzy, c-format
+#: ../../standalone/drakconnect:1
+#, c-format
msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"Ôï Mandrake Linux 9.1 óáò đáńĘśćé 11 äéáöïńćôéêÜ ăńáöéêÜ đćńéâÜëëïíôá đïő "
-"ìđïńïęí íá ìćôáôńáđïęí đëȚńùò: KDE 3, Gnome 2, WindowMaker, ..."
+"Đńïćéäïđïßçóç, ćíôïđßóôçêć ìéá Üëëç óęíäćóç Äéáäéêôęïő đïő ßóùò śńçóéìïđïéćß "
+"ôï äßêôőü óáò"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A customizable environment"
-msgstr "žíá đńïóáńìïæüìćíï đćńéâÜëëïí"
+msgid "Backup Users"
+msgstr "Áíôßăńáöï Áóöáëćßáò Śńçóôțí"
-#: ../../share/advertising/06-development.pl:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
msgstr ""
+"Đáńáêáëț ćéóÜăćôć ôï üíïìá ôïő óőóôȚìáôïò.\n"
+"Ôï üíïìá áőôü đńĘđćé íá ćßíáé Ęíá đëȚńćò üíïìá óőóôȚìáôïò,\n"
+"üđùò đ.ś. ``mybox.mylab.myco.com''.\n"
+"Ìđïńćßôć ćđßóçò íá ćéóÜăćôć êáé ôçí äéćęèőíóç IP ôçò đęëçò äéêôęïő"
-#: ../../share/advertising/06-development.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr "Ôï Mandrake Linux 9.1 ćßíáé ç őđĘńôáôç đëáôöüńìá áíÜđôőîçò"
+msgid "Select Printer Spooler"
+msgstr "ĆđéëïăȚ Spooler ĆêôőđùôȚ"
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
-msgstr ""
-"Ìćôáìïńöțóôć ôï ìçśÜíçìÜ óáò óć Ęíáí äőíáôü äéáêïìéóôȚ Linux ìć ìćńéêÜ êëéê "
-"ôïőđïíôéêéïę óáò: ÄéáêïìéóôȚò Éóôïę, ôáśőäńïìćßïő, äńïìïëïăçôȚò, "
-"ćîőđçńćôçôȚò áńśćßùí êáé ćêôőđùôțí, ..."
+msgid "Create new theme"
+msgstr "Äçìéïőńăßá íĘïő èĘìáôïò"
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Turn your computer into a reliable server"
-msgstr "ÌćôáôńĘűôć ôï ìçśÜíçìÜ óáò óć Ęíáí áîéüđéóôï äéáêïìéóôȚ"
-
-#: ../../share/advertising/08-store.pl:1
-#, fuzzy, c-format
-msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
-msgstr "Linux:"
+msgid "Mandrake Tools Explanation"
+msgstr "ĆđćîȚăçóç Ćńăáëćßùí ôçò Mandrake"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "The official MandrakeSoft Store"
-msgstr "Ôï ćđßóçìï êáôÜóôçìá ôçò MandrakeSoft"
+msgid "No image found"
+msgstr "Äćí âńĘèçêć ćéêüíá"
-#: ../../share/advertising/09-mdksecure.pl:1
-#, fuzzy, c-format
+#: ../../install_steps.pm:1
+#, c-format
msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
-msgstr "Linux"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
+msgstr ""
+"ÌćńéêÜ óçìáíôéêÜ đáêĘôá äćí ćăêáôáóôÜèçêáí óùóôÜ.\n"
+"Ï ïäçăüò CD-ROM Ț ôï CD-ROM ćßíáé ćëáôôùìáôéêü.\n"
+"ĆëĘăîôć ôï CD-ROM óć Ęíá Üëëï óęóôçìá śńçóéìïđïéțíôáò ôçí ćíôïëȚ \"rpm -qpl "
+"Mandrake/RPMS/*.rpm\"\n"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
-msgstr ""
+msgid "Detected model: %s"
+msgstr "ÂńĘèçêć ôï ìïíôĘëï: %s"
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakedm:1
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
+"Ï ÄéáśćéńéóôȚò ĐńïâïëȚò X11 óáò ćđéôńĘđćé íá óőíäćèćßôć\n"
+"ìć ăńáöéêü ôńüđï óôï óęóôçìÜ óáò ìć ôï Óęóôçìá Đáńáèęńïő Ś íá őđïóôçńßæćé\n"
+"ôáőôüśńïíćò äéáöïńćôéêĘò óőíćäńßćò Ś óôï ìçśÜíçìÜ óáò."
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Optimize your security by using Mandrake Linux"
-msgstr "ÂćëôéóôïđïéȚóôć ôçí áóöÜëćéÜ óáò"
+msgid "if set to yes, run the daily security checks."
+msgstr "áí ïńéóôćß íáé, ćêôĘëćóç ćëĘăśùí áóöáëćßáò êáèçìćńéíÜ."
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr "Áőôü ôï đńïúüí ćßíáé äéáèĘóéìï óôçí éóôïóćëßäá ôïő MandrakeStore"
+msgid "Azerbaijan"
+msgstr "ÁæćńìđáúôæÜí"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
-msgstr ""
+msgid "No tape in %s!"
+msgstr "ÊáìéÜ ôáéíßá óôï %s!"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr ""
+msgid "Dvorak (US)"
+msgstr "Dvorak (ÇĐÁ)"
-#: ../../share/advertising/12-mdkexpert.pl:1
-#, fuzzy, c-format
+#: ../../standalone/harddrake2:1
+#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
-msgstr "Linux:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+msgstr ""
+"áőôȚ ćßíáé ç öőóéêȚ èĘóç óôçí ïđïßá ćßíáé óőíäćìĘíç ç óőóêćőȚ (đ.ś.PCI, "
+"USB, ...)"
-#: ../../share/advertising/12-mdkexpert.pl:1
-#, fuzzy, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr "Ćęńćóç"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "How is the printer connected?"
+msgstr "Đțò ćßíáé óőíäćäćìĘíïò ï ćêôőđùôȚò óáò;"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Become a MandrakeExpert"
-msgstr "Ăßíćôć MandrakeExpert"
+msgid "Security level"
+msgstr "Ćđßđćäï áóöáëćßáò"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
-#, fuzzy, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr "Œëá."
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "final resolution"
+msgstr "ôćëéêȚ áíÜëőóç"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr ""
+msgid "Services"
+msgstr "Őđçńćóßćò"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "MandrakeExpert Corporate"
+msgid "4 MB"
+msgstr "4 MB"
#: ../../share/compssUsers:999
msgid "Office Workstation"
@@ -19108,10 +19180,6 @@ msgstr ""
"(kspread, gnumeric), áńśćßá pdf êëđ"
#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Óôáèìüò Ćńăáóßáò"
-
-#: ../../share/compssUsers:999
msgid "Game station"
msgstr "Óôáèìüò đáéśíéäéțí"
@@ -19182,10 +19250,6 @@ msgid ""
msgstr "Ôï đćńéâÜëëïí ăńáöćßïő KDE ìć ìéá óőëëïăȚ óőíïäćőôéêțí ćńăáëćßùí"
#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Ăńáöéêü ĐćńéâÜëëïí"
-
-#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Óôáèìüò Ćńăáóßáò Gnome"
@@ -19204,10 +19268,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm, êëđ"
#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "ÁíÜđôőîç"
-
-#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "ÂéâëéïèȚêćò áíÜđôőîçò C êáé C++, đńïăńÜììáôá êáé Üëëá áńśćßá"
@@ -19277,34 +19337,94 @@ msgstr ""
"ćîőđçńćôçôȚò NFS, ćîőđçńćôçôȚò SMB, ćîőđçńćôçôȚò Proxy, ćîőđçńćôçôȚò ssh"
#: ../../share/compssUsers:999
-msgid "Audio station"
-msgstr "Óôáèìüò čśïő"
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr ""
+"Óćô ćńăáëćßùí ăéá ôçí áđïóôïëȚ êáé ëȚűç áëëçëïăńáößáò, ćéäȚóćùí êáé "
+"đćńéȚăçóç óôï Äéáäßêôőï"
-#: ../../share/compssUsers:999
-msgid "Sound playing/editing programs"
-msgstr "ĐńïăńÜììáôá áíáđáńáăùăȚò/äéáśćßńéóçò Țśïő"
+#~ msgid "Internet connection & configuration"
+#~ msgstr "Óęíäćóç êáé ńęèìéóç Äéáäéêôęïő"
-#: ../../share/compssUsers:999
-msgid "Video station"
-msgstr "Óôáèìüò âßíôćï"
+#~ msgid "Configure the connection"
+#~ msgstr "Ńęèìéóç ôçò óęíäćóçò"
-#: ../../share/compssUsers:999
-msgid "Video playing programs"
-msgstr "ĐńïăńÜììáôá áíáđáńáăùăȚò âßíôćï"
+#~ msgid "Disconnect"
+#~ msgstr "Áđïóęíäćóç"
-#: ../../share/compssUsers:999
-msgid "Graphic station"
-msgstr "Óôáèìüò ăńáöéêțí"
+#~ msgid "Connect"
+#~ msgstr "Óęíäćóç"
-#: ../../share/compssUsers:999
-msgid "Graphics programs"
-msgstr "ĐńïăńÜììáôá ăńáöéêțí"
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Ìđïńćßôć íá ćđáíáńőèìßóćôć ôç óęíäćóȚ óáò."
-#: ../../share/compssUsers:999
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr ""
-"Óćô ćńăáëćßùí ăéá ôçí áđïóôïëȚ êáé ëȚűç áëëçëïăńáößáò, ćéäȚóćùí êáé "
-"đćńéȚăçóç óôï Äéáäßêôőï"
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Ìđïńćßôć íá óőíäćèćßôć óôï Äéáäßêôőï Ț íá ćđáíáńőèìßóćôć ôç óęíäćóȚ óáò."
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "ÁőôȚ ôç óôéăìȚ äćí ćßóôć óőíäćäćìĘíïé óôï Äéáäßêôőï."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can disconnect or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Ìđïńćßôć íá áđïóőíäćèćßôć Ț íá ćđáíáńőèìßóćôć ôç óęíäćóȚ óáò."
+
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "ÁőôȚ ôç óôéăìȚ ćßóôć óőíäćäćìĘíïé óôï Äéáäßêôőï."
+
+#~ msgid "files sending by FTP"
+#~ msgstr "áđïóôïëȚ áńśćßùí ìĘóù FTP"
+
+#~ msgid "Relaunch 'lilo'"
+#~ msgstr "Ćđáíćêêßíçóç 'lilo'"
+
+#~ msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+#~ msgstr "Äçìéïőńăßá initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+
+#~ msgid "Write %s"
+#~ msgstr "ĆăăńáöȚ %s"
+
+#~ msgid "Copy %s to %s"
+#~ msgstr "ÁíôéăńáöȚ %s óć %s"
+
+#~ msgid "Backup %s to %s.old"
+#~ msgstr "Áíôßăńáöï Áóöáëćßáò ôïő %s óć %s.old"
+
+#~ msgid "ttf fonts conversion"
+#~ msgstr "ìćôáôńïđȚ ăńáììáôïóćéńțí ttf"
+
+#~ msgid "Fonts conversion"
+#~ msgstr "ÌćôáôńïđȚ Ăńáììáôïóćéńțí"
+
+#~ msgid "Author:"
+#~ msgstr "Äçìéïőńăüò:"
+
+#~ msgid "Audio station"
+#~ msgstr "Óôáèìüò čśïő"
+
+#~ msgid "Sound playing/editing programs"
+#~ msgstr "ĐńïăńÜììáôá áíáđáńáăùăȚò/äéáśćßńéóçò Țśïő"
+
+#~ msgid "Video station"
+#~ msgstr "Óôáèìüò âßíôćï"
+
+#~ msgid "Video playing programs"
+#~ msgstr "ĐńïăńÜììáôá áíáđáńáăùăȚò âßíôćï"
+
+#~ msgid "Graphic station"
+#~ msgstr "Óôáèìüò ăńáöéêțí"
+
+#~ msgid "Graphics programs"
+#~ msgstr "ĐńïăńÜììáôá ăńáöéêțí"
#~ msgid "Printer sharing"
#~ msgstr "ÊïéíȚ śńȚóç ćêôőđùôțí"
@@ -19420,12 +19540,10 @@ msgstr ""
#~ "button\n"
#~ "to change it if necessary.\n"
#~ "\n"
-#~ " * \"Keyboard\": check the current keyboard map configuration and click "
-#~ "on\n"
+#~ " * \"%s\": check the current keyboard map configuration and click on\n"
#~ "the button to change that if necessary.\n"
#~ "\n"
-#~ " * \"Country\": check the current country selection. If you are not in "
-#~ "this\n"
+#~ " * \"%s\": check the current country selection. If you are not in this\n"
#~ "country, click on the button and choose another one.\n"
#~ "\n"
#~ " * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
@@ -19532,8 +19650,7 @@ msgstr ""
#~ "your machine. If you're not sure, you can check the list of hardware\n"
#~ "detected in your machine by selecting \"See hardware info \" and "
#~ "clicking\n"
-#~ "the \"Next ->\". Examine the list of hardware and then click on the "
-#~ "\"Next\n"
+#~ "the \"%s\". Examine the list of hardware and then click on the \"Next\n"
#~ "->\" button to return to the SCSI interface question.\n"
#~ "\n"
#~ "If you had to manually specify your PCI SCSI adapter, DrakX will ask if "
@@ -19589,8 +19706,7 @@ msgstr ""
#~ "your\n"
#~ "first experience with GNU/Linux.\n"
#~ "\n"
-#~ " * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice "
-#~ "for\n"
+#~ " * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
#~ "printing to your local printer or to one halfway around the planet. It "
#~ "is\n"
#~ "simple to configure and can act as a server or a client for the ancient\n"
@@ -19599,7 +19715,7 @@ msgstr ""
#~ "setup\n"
#~ "is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, "
#~ "make\n"
-#~ "sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
+#~ "sure to turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
#~ "front-ends for printing or choosing printer options and for managing the\n"
#~ "printer.\n"
#~ "\n"
@@ -19740,97 +19856,11 @@ msgstr ""
#, fuzzy
#~ msgid ""
-#~ "This is the most crucial decision point for the security of your GNU/"
-#~ "Linux\n"
-#~ "system: you have to enter the \"root\" password. \"Root\" is the system\n"
-#~ "administrator and is the only one authorized to make updates, add users,\n"
-#~ "change the overall system configuration, and so on. In short, \"root\" "
-#~ "can\n"
-#~ "do everything! That is why you must choose a password that is difficult "
-#~ "to\n"
-#~ "guess - DrakX will tell you if the password that you chose too easy. As "
-#~ "you\n"
-#~ "can see, you are not forced to enter a password, but we strongly advise "
-#~ "you\n"
-#~ "against. GNU/Linux is as prone to operator error as any other operating\n"
-#~ "system. Since \"root\" can overcome all limitations and unintentionally\n"
-#~ "erase all data on partitions by carelessly accessing the partitions\n"
-#~ "themselves, it is important that it be difficult to become \"root\".\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. Never write down the \"root\" password -- it makes it "
-#~ "too\n"
-#~ "easy to compromise a system.\n"
-#~ "\n"
-#~ "One caveat -- do not make the password too long or complicated because "
-#~ "you\n"
-#~ "must be able to remember it!\n"
-#~ "\n"
-#~ "The password will not be displayed on screen as you type it in. To "
-#~ "reduce\n"
-#~ "the chance of a blind typing error you will need to enter the password\n"
-#~ "twice. If you do happen to make the same typing error twice, this\n"
-#~ "``incorrect'' password will have to be used the first time you connect.\n"
-#~ "\n"
-#~ "If you wish access to this computer to be controlled by an "
-#~ "authentication\n"
-#~ "server, clisk the \"Advanced\" button.\n"
-#~ "\n"
-#~ "If your network uses either LDAP, NIS, or PDC Windows Domain "
-#~ "authentication\n"
-#~ "services, select the appropriate one as \"authentication\". If you do "
-#~ "not\n"
-#~ "know which to use, ask your network administrator.\n"
-#~ "\n"
-#~ "If you happen to have problems with reminding passwords, you can choose "
-#~ "to\n"
-#~ "have \"No password\", if your computer won't be connected to the "
-#~ "Internet,\n"
-#~ "and if you trust anybody having access to it."
-#~ msgstr ""
-#~ "Linux\n"
-#~ " Root\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ " Linux\n"
-#~ "\n"
-#~ "\n"
-#~ " óçìáíôéêü\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ " ćîőđçńćôçôȚò Ăéá ĐńïśùńçìĘíïőò\n"
-#~ "\n"
-#~ " LDAP NIS ÔïìĘáò Windows ÔïìĘáò\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ " Œśé Äéáäßêôőï\n"
-#~ "."
-
-#, fuzzy
-#~ msgid ""
#~ "Your choice of preferred language will affect the language of the\n"
#~ "documentation, the installer and the system in general. Select first the\n"
#~ "region you are located in, and then the language you speak.\n"
#~ "\n"
-#~ "Clicking on the \"Advanced\" button will allow you to select other\n"
+#~ "Clicking on the \"%s\" button will allow you to select other\n"
#~ "languages to be installed on your workstation, thereby installing the\n"
#~ "language-specific files for system documentation and applications. For\n"
#~ "example, if you will host users from Spain on your machine, select "
@@ -19840,7 +19870,7 @@ msgstr ""
#~ "\n"
#~ "Note that you're not limited to choosing a single additional language. "
#~ "Once\n"
-#~ "you have selected additional locales, click the \"Next ->\" button to\n"
+#~ "you have selected additional locales, click the \"%s\" button to\n"
#~ "continue.\n"
#~ "\n"
#~ "To switch between the various languages installed on the system, you can\n"
@@ -19870,7 +19900,7 @@ msgstr ""
#~ " śńȚóôçò."
#~ msgid ""
-#~ "\"Country\": check the current country selection. If you are not in this\n"
+#~ "\"%s\": check the current country selection. If you are not in this\n"
#~ "country, click on the button and choose another one."
#~ msgstr ""
#~ "\"Śțńá\": ćëĘăîôć ôçí ćđéëïăȚ śțńáò. Áí äćí ćßóôć óć áőôȚ ôç śțńá,\n"
@@ -19932,14 +19962,13 @@ msgstr ""
#, fuzzy
#~ msgid ""
#~ "There you are. Installation is now complete and your GNU/Linux system is\n"
-#~ "ready to use. Just click \"Next ->\" to reboot the system. The first "
-#~ "thing\n"
+#~ "ready to use. Just click \"%s\" to reboot the system. The first thing\n"
#~ "you should see after your computer has finished doing its hardware tests "
#~ "is\n"
#~ "the bootloader menu, giving you the choice of which operating system to\n"
#~ "start.\n"
#~ "\n"
-#~ "The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
+#~ "The \"%s\" button (in Expert mode only) shows two more buttons to:\n"
#~ "\n"
#~ " * \"generate auto-install floppy\": to create an installation floppy "
#~ "disk\n"
@@ -20571,18 +20600,12 @@ msgstr ""
#~ msgid "/Autodetect printers"
#~ msgstr "/Ćíôïđéóìüò ćêôőđùôțí"
-#~ msgid "Format of floppies the drive accept"
-#~ msgstr "ÖïńìÜ ăéá äéóêĘôćò đïő ìđïńćß íá äćśôćß ï ïäçăüò"
-
#~ msgid "Mail/Groupware/News"
#~ msgstr "Ôáśőäńïìćßï/Groupware/ĆéäȚóćéò"
#~ msgid "Postfix mail server, Inn news server"
#~ msgstr "ĆîőđçńćôçôȚò ôáśőäńïìćßïő Postfix, ćîőđçńćôçôȚò ćéäȚóćùí Inn"
-#~ msgid "Upgrade"
-#~ msgstr "ÁíáâÜèìéóç"
-
#~ msgid "Do you want to configure another printer?"
#~ msgstr "ÈĘëćôć íá ńőèìßóćôć êáé Üëëïí ćêôőđùôȚ;"
diff --git a/perl-install/share/po/eo.po b/perl-install/share/po/eo.po
index b65cd89ea..454e15fd0 100644
--- a/perl-install/share/po/eo.po
+++ b/perl-install/share/po/eo.po
@@ -5,7 +5,7 @@
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
"PO-Revision-Date: 2003-03-12 18:31-0400\n"
"Last-Translator: Vilhelmo Lutermano <vlutermano@free.fr>\n"
"Language-Team: esperanto <eo@li.org>\n"
@@ -14,950 +14,1498 @@ msgstr ""
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 0.9.6\n"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
+msgid "Scanning partitions to find mount points"
+msgstr "Leganta subdiskojn por trovi kroĉpunktojn"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of suid root files."
msgstr ""
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Cancel"
-msgstr "Nuligu"
+msgid "\t\tErase=%s"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "network printer port"
+msgstr "Reta Printilo (TCP/ingo)"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Please insert floppy disk:"
+msgstr "EnƝovu disketon en drajvo %s"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Launch userdrake"
-msgstr "Lanĉu userdrake"
+msgid "PCMCIA"
+msgstr "PCMCIA"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
+"The backup partition table has not the same size\n"
+"Still continue?"
msgstr ""
-"Ĉu vi Ɲatus permesi al uzuloj kundividi iujn el siaj dosierujoj?\n"
-"Permesi tion ebligos al uzuloj simple klaki sur \"Share\" respektive "
-"\"Kundividu\"\n"
-"en Konkeranto kaj nautilus.\n"
-"\n"
-"\"Custum\" ebligas per-uzulan.\n"
+"La rezerva subdisktabelo ne estas la sama grandeco\n"
+"Ĉu daƭras tamen?"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
+msgid "Which username"
+msgstr "Kiu salutnomo"
#: ../../any.pm:1
#, c-format
-msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
-msgstr ""
-"Vi povas eksporti uzante NFS aƭ Samba. Bonvole elektu kiun vi Ɲatus uzi."
+msgid "Which type of entry do you want to add?"
+msgstr "Kiun specon de enskribo vi deziras aldoni"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Ĉi tiu pakaÄ”o %s devas esti instalita. Ĉu vi deziras instali ĝin?"
+msgid "Restore partition table"
+msgstr "RestaĆ­ru subdiskotabelon"
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Custom"
-msgstr "Akomodata"
+msgid "On CUPS server \"%s\""
+msgstr "Ĉe CUPS-servilo \"%s\""
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Allow all users"
-msgstr "Permesu ĉiujn uzulojn"
+msgid "Post-install configuration"
+msgstr "Post-instala konfigurado"
-#: ../../any.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "No sharing"
-msgstr "Ne kundivido"
+msgid "Use ``%s'' instead"
+msgstr "Uzu ``%s'' anstataĆ­e"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "More"
-msgstr "Plu"
+msgid "Type"
+msgstr "Tipo"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Here is the full list of available countries"
-msgstr "Jen la kompleta listo de atingeblaj landoj"
+msgid ""
+"\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please choose your country."
-msgstr "Bonvole elektu vian landon."
+msgid "Sri Lanka"
+msgstr "Sri Lanko"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid " / Region"
-msgstr "Reunio"
+msgid ""
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr "Via komputilo ne havas retadaptilon!"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Country"
-msgstr "Lando"
+msgid "Central African Republic"
+msgstr "Centrafrika Respubliko"
-#: ../../any.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "All languages"
-msgstr "Ĉiuj lingvoj"
+msgid "Gateway device"
+msgstr "Prokura kluzaparato"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use Unicode by default"
-msgstr "Uzu Unikodon defaĆ­lte"
+msgid "Net Method:"
+msgstr ""
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr ""
-"Vi povas elektu aliajn lingvojn kiujn estos uzeblaj malantaĆ­ la instalado"
+msgid "Ethernetcard"
+msgstr "Ethernet-karto"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please choose a language to use."
-msgstr "Bonvole elektu lingvon por uzi."
+msgid "Parameters"
+msgstr ""
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Choose the window manager to run:"
-msgstr "Elektu la fenestro-administrilon por lanĉi:"
+msgid "Auto-detect"
+msgstr "Memdetekta"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Interface:"
+msgstr "Interreto"
+
+#: ../../steps.pm:1
#, c-format
-msgid "Choose the default user:"
-msgstr "Elektu la defaĆ­ltan uzulon:"
+msgid "Select installation class"
+msgstr "Elektu instalklason"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Do you want to use this feature?"
-msgstr "Ĉu vi deziras uzi tiun funkcion?"
+msgid "on CDROM"
+msgstr ""
-#: ../../any.pm:1
+#: ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid ""
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
+msgstr "Konektu al la Interreto / Konfiguru lokan Reton"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr "Mi povas konfiguri vian komputilon por aĆ­tomate enirigi unu uzulon"
+msgid ""
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Autologin"
-msgstr "AĆ­tomata-enregistrado"
+msgid "Belarus"
+msgstr "Belarusio"
-#: ../../any.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Icon"
-msgstr "Piktogramo"
+msgid "Error writing to file %s"
+msgstr "Eraro skribante al dosiero %s"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Shell"
-msgstr "Ɯelo"
+msgid ""
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
+msgstr ""
+"apmd estas uzata por monitori la bateriostaton kaj registri ĝin en la\n"
+"sistemlogdosiero (syslog). Vi ankaƭ povas uzi ĝin por halti la komputilon\n"
+"kiam la baterioƝargo estas malgranda."
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use tape to backup"
+msgstr "Malbona rezerva dosiero"
+
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Password (again)"
-msgstr "Pasvorto (denove)"
+msgid "The following packages are going to be installed"
+msgstr "La sekvaj pakaĔoj estos instalataj"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "CUPS configuration"
+msgstr "LAN KonfiguraĔo"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Password"
-msgstr "Pasvorto"
+msgid "Hong Kong"
+msgstr "Hongkongo"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "User name"
-msgstr "Salutnomo"
+msgid "Not enough free space to allocate new partitions"
+msgstr "Mankas sufiĉan da libera spaco por disponigi novajn subdiskojn"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Real name"
-msgstr "Vera nomo"
+msgid "Moving"
+msgstr "Movante"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Accept user"
-msgstr "Akceptu uzanto"
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
+msgstr ""
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Done"
-msgstr "Finata"
+msgid "("
+msgstr ""
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Enter a user\n"
-"%s"
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
msgstr ""
-"Enigu uzanton\n"
-"%s"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "Add user"
-msgstr "Aldonu uzanto"
+msgid ")"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This user name has already been added"
-msgstr "Ĉi tiu salutnomo estas jam aldonita"
+msgid "Lebanon"
+msgstr "Libano"
-#: ../../any.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "The user name is too long"
-msgstr "Ĉi tiu salutnomo estas tro longa"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Salutnomo devas enhavi nur minusklojn, ciferojn, `-' kaj `_'"
+msgid "Stop"
+msgstr "Haltu"
-#: ../../any.pm:1
-#, c-format
-msgid "Please give a user name"
-msgstr "Bonvole donu salutnomon"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Edit selected host"
+msgstr "Malinstalu printvicon"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "No CD device defined!"
+msgstr "Elektu dosieron"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "This password is too simple"
-msgstr "Ĉi tiu pasvorto estas tro simpla"
+msgid "Bulgarian (phonetic)"
+msgstr "Bulgara (fonetika)"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Please try again"
-msgstr "Bonvole provu denove"
+msgid "The DHCP start ip"
+msgstr ""
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "The passwords do not match"
-msgstr "La pasvortoj ne egalas"
+msgid "256 kB"
+msgstr "256 KB"
#: ../../any.pm:1
#, c-format
-msgid "(already added %s)"
-msgstr "(jam aldonis %s)"
+msgid "Bootloader main options"
+msgstr "StartƝargilo ĉefaj opcioj"
-#: ../../any.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "access to compilation tools"
-msgstr "aliro al kompililoj"
+msgid ""
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
+msgstr ""
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "access to network tools"
-msgstr "aliro al retiloj"
+msgid "Tape"
+msgstr "Bendo"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Scanning network..."
+msgstr "Startas vian konektaĔon..."
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "access to administrative files"
-msgstr "aliro al administraj dosieroj"
+msgid ""
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "allow \"su\""
-msgstr "permesu \"su\""
+msgid "Malaysia"
+msgstr "Malajzio"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "access to rpm tools"
-msgstr "aliro al rpm-iloj"
+msgid "Swiss (French layout)"
+msgstr "Svisa (franca aranĝo)"
-#: ../../any.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "access to X programs"
-msgstr "aliro al X-programoj"
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "mkraid malsukcesis (eble raidtools mankas)"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Webcam"
+msgstr "Webcam"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "size of the (second level) cpu cache"
+msgstr ""
+
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Soundcard"
+msgstr "Sonkarto"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
msgstr ""
-"Jen la diversaj enskriboj.\n"
-"Vi povas aldoni pli aƭ Ɲanĝi la ekzistantajn."
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Other OS (windows...)"
-msgstr "Alia Mastruma Sistemo (Vindozo...)"
+msgid "Level %s\n"
+msgstr "Nivelo %s\n"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Alia Mastruma Sistemo (MacOS...)"
+msgid "Luxembourg"
+msgstr "Luksemburgo"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Alia Mastruma Sistemo (SunOS...)"
+msgid ""
+"\n"
+" DrakBackup Daemon Report\n"
+"\n"
+"\n"
+msgstr ""
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Linux"
-msgstr "Linukso"
+msgid "Iran"
+msgstr "Irano"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Kiun specon de enskribo vi deziras aldoni"
+msgid "Bus"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This label is already used"
-msgstr "Ĉi tiu etikedo estas jam uzata"
+msgid "Iraq"
+msgstr "Irako"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "You must specify a root partition"
-msgstr "Vi devas difini radikan (root) subdiskon"
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr "Ebla konflikto pri Loka-Reta adreso trovata en nuna konfiguro de %s!\n"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "You must specify a kernel image"
-msgstr "Vi devas decidi pri kerno-bildo"
+msgid "Configuring..."
+msgstr "Mi konfiguras..."
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The setup has already been done, and it's currently enabled."
+msgstr ""
+"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"
+
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Empty label not allowed"
-msgstr "Malplena etikedo ne estas permesata"
+msgid ""
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
+msgstr ""
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Default"
-msgstr "DefaĆ­lta"
+msgid "Password (again)"
+msgstr "Pasvorto (denove)"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "NoVideo"
+msgid "Search installed fonts"
msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Initrd-size"
-msgstr "Initrd-grandeco"
+msgid "Venezuela"
+msgstr "Venezuelo"
-#: ../../any.pm:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Append"
-msgstr "Alfiksu"
+msgid "IP address"
+msgstr "IP-adreso"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Label"
-msgstr "Etikedo"
+msgid "Choose the sizes"
+msgstr "Elektu la grandecojn"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unsafe"
-msgstr "Danĝera"
+msgid ""
+"List of data corrupted:\n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Table"
-msgstr "Tabelo"
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
+msgstr ""
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Root"
-msgstr "Radiko"
+msgid "Choose another partition"
+msgstr "Elektu alian subdiskon"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Current user"
+msgstr "Akceptu uzanto"
+
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Read-write"
-msgstr "Lega-skriba"
+msgid "Username"
+msgstr "Uzulnomo"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid "Left \"Windows\" key"
+msgstr "Maldekstra \"Vindozo\"-klavo"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "dhcpd Server Configuration"
+msgstr "LAN KonfiguraĔo"
+
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Video mode"
-msgstr "Grafika reĝimo"
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Image"
-msgstr "Kerna bildo"
+msgid "Guyana"
+msgstr "Gujano"
-#: ../../any.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Default OS?"
-msgstr "DefaĆ­lta Mastruma Sistemo?"
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Enable OF Boot?"
-msgstr "Ĉu ebligi OF Boot?"
+msgid "Remove a module"
+msgstr "Forprenu modulon"
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Enable CD Boot?"
-msgstr "Ĉu ebligi CD Boot?"
+msgid "Password"
+msgstr "Pasvorto"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Kernel Boot Timeout"
+msgid ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Advanced Configuration"
+msgstr "LAN KonfiguraĔo"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Open Firmware Delay"
+msgid "Scanning on your HP multi-function device"
msgstr ""
#: ../../any.pm:1
#, c-format
-msgid "Boot device"
-msgstr "Starta aparato"
+msgid "Root"
+msgstr "Radiko"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Init Message"
-msgstr ""
+msgid "Choose an existing RAID to add to"
+msgstr "Elektu ekzistantan RAID por aldoni"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Bootloader to use"
-msgstr "StartƝargilo por uzi"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "Turka (moderna \"Q\" modelo)"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Bootloader main options"
-msgstr "StartƝargilo ĉefaj opcioj"
+msgid "Lilo message not found"
+msgstr ""
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Opcio ``Limigu komandliniajn opciojn'' ne estas utila sen pasvorto"
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
+msgstr ""
+"Auxtomata regenerado de kernokapoj en /boot por\n"
+"/usr/include/linux/{autoconf, version}.h"
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Give the ram size in MB"
-msgstr "Donu kvanton de memoro en MB"
+msgid "if needed"
+msgstr "se bezonata"
-#: ../../any.pm:1
-#, c-format
-msgid "Enable multiple profiles"
-msgstr "Ebligu multoblajn profilojn"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore Failed..."
+msgstr "RestaĆ­ru de dosiero"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _jazz drives"
+msgstr "Malproksima printilo"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Preciza kvanto de memoro se bezonata (trovis %d MB)"
+msgid ""
+"Description:\n"
+"\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
+"\n"
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
+"\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
+"\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
+"\n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../install_messages.pm:1
+#, fuzzy, c-format
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
+msgstr ""
+"Enkonduko\n"
+"\n"
+"La mastrum-sistemo kaj la diversaj komponantoj atingeblaj en la Mandrako- "
+"Linuks-eldono\n"
+"estu en la sekvo nomataj la \"softvarproduktoj\". La softvarproduktoj "
+"inkluzivigas la tutaĔon de programoj, metodoj, reguloj kaj dokumentado "
+"koncerne la mastruman sistemon,\n"
+"kaj la diversajnf komponantojn de la Mandrako-Linuks-eldono, sed\n"
+"ne estas limigitaj al ili.\n"
+"\n"
+"\n"
+"1. Licenckonsento \n"
+"Bonvole legu tiun ĉi dokumenton zorge. Tiu ĉi dokumento estas licenckonsento "
+"inter vi kaj\n"
+"MandrakeSoft S.A. kiu aplikiĝas al la softvarproduktoj.\n"
+"Per instalado, duobligado aĆ­ uzado de la softvarproduktoj en ajna maniero, "
+"vi eksplicite\n"
+"akceptas kaj plene konsentas agi konforme al la teksto kaj kondiĉoj de tiu "
+"ĉi licenco.\n"
+"Se vi malsamopinias kun iu ajn parto de la licenco, vi ne rajtas instali, "
+"duobligi aĆ­ uzi\n"
+"la softvarproduktojn.\n"
+"Iu ajn provo instali, duobligi aĆ­ uzi la softvarproduktojn en maniero kiu ne "
+"kongruas kun la teksto kaj kondiĉoj de tiu ĉi licenco estas\n"
+
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Purigu /tmp dum ĉiuj startadoj"
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Current interface configuration"
+msgstr "Interreta Konfigurado"
+
+#: ../../printer/data.pm:1
#, c-format
-msgid "Create a bootdisk"
-msgstr "Kreu praƝargdisketon"
+msgid "LPD - Line Printer Daemon"
+msgstr ""
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "restrict"
-msgstr "limigu"
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
+msgstr ""
+"\n"
+"Se via havas ISA-an karton, la valoro sur la sekvanta ekrano devus esti "
+"ĝusta.\n"
+"\n"
+"Se vi havas PCMCIA-an karton, vi bezonas scii la IRQ-o kaj I/O (Eneligo)\n"
+"por via karto.\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Do not print any test page"
+msgstr "Printas provpaĝo(j)n..."
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restrict command line options"
-msgstr "Limigu komandliniajn opciojn"
+msgid "Gurmukhi"
+msgstr "gumurka"
#: ../../any.pm:1
#, c-format
msgid "Force No APIC"
msgstr "Devigu No APIC"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Enable ACPI"
-msgstr "Ebligu ACPI"
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr ""
+"Ĉi tiu pasvorto ests tro simpla (ĝi devas esti almenaƭ %d signoj longa)"
-#: ../../any.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Delay before booting default image"
-msgstr "Prokrastoperiodo antaĆ­ starti defaĆ­ltan sistemon"
+msgid "[keyboard]"
+msgstr "[klavaro]"
-#: ../../any.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "compact"
-msgstr "kompakta"
+msgid "FTP proxy"
+msgstr "FTP prokura servilo"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Install List"
+msgstr "Instalu sistemon"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr "RestaĆ­ru de dosiero"
+
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Show only for the selected day"
+msgstr "Montru nur por ĉi tiu tago"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Compact"
-msgstr "Kompakta"
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
+"\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
+"\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Bootloader installation"
-msgstr "StartƝargila instalado"
+msgid "512 kB"
+msgstr "512 KB"
-#: ../../any.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "First sector of boot partition"
-msgstr "Unua sektoro de starta subdisko"
+msgid "Logs"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Unu sektoro de drajvo (ĈefStartRikordo)"
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Kie vi deziras instali la startƝargilon?"
+msgid "<control>N"
+msgstr "<stir>N"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "LILO/grub Installation"
-msgstr "LILO/grub Instalado"
+msgid "What kind of card do you have?"
+msgstr "Kiun specon de karto vi havas?"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "SILO Installation"
-msgstr "SILO Instalado"
+msgid "<control>O"
+msgstr "<control>O"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
-msgid "Skip"
-msgstr "Ellasu"
+msgid "Security"
+msgstr "Sekureco"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "On Floppy"
-msgstr "Sur disketo"
+msgid ""
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "First sector of the root partition"
-msgstr "Unua sektoro de radika subdisko"
+msgid "<control>Q"
+msgstr "<control>Q"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Unknown"
+msgstr "Genera"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr ""
+
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#, c-format
+msgid "Network Configuration"
+msgstr "Reta KonfiguraĔo"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>S"
+msgstr "<control>S"
+
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
msgstr ""
-"Vi decidis instali la startilon en subdiskon.\n"
-"Tio implicas ke vi jam havas startilon sur la fiskdisko kiun vi startigas "
-"(ekz-e: System Commander).\n"
-"\n"
-"En kiu drajvo vi startigas?"
+"Protokolo por la cetera mondo \n"
+"Neniom da D-Kanelo (lukontraktataj lineoj)"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Creating bootdisk..."
-msgstr "Kreas startdisketon"
+msgid "Option %s must be a number!"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "Notice"
+msgstr "agrabla(j)"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "Insert a floppy in %s"
-msgstr "EnƝovu disketon en %s"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
+msgstr ""
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Elektu la disketdrajvo vi deziras uzi por krei la startdisketon"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Second floppy drive"
-msgstr "Dua disketa drajvo"
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr "Vi ne konfiguris X-on. Ĉu vi certas vere voli tion?"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "First floppy drive"
-msgstr "Unua disketa drajvo"
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "BedaĆ­rinde, neniu disketdrajvo havebla"
+msgid "What type of partitioning?"
+msgstr "Kiun specon de subdiskado?"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
+"file list sent by FTP: %s\n"
+" "
msgstr ""
-"Akomodita startdisketo provizas manieron de starti via Linuksa sistemo\n"
-"sendepende de la normala startƝargilo. Ĉi tiu estas utila se vi ne deziras\n"
-"instali LILO (aĆ­ grub) sur via sistemo, aĆ­ alia mastruma sistemo forigas "
-"LILO,\n"
-"aĆ­ LILO ne funkcias kun via komputilo. Akomodita startdisketo ankaĆ­ povas\n"
-"esti uzata kun la Mandrejka savdisko, kiu plifaciligas resaniĝi de severaj\n"
-"sistemaj paneoj. Ĉu vi deziras krei startdisketo por via sistemo?\n"
-"%s"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Interface"
+msgstr "Interfaco"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
+"Options Description:\n"
"\n"
+" - Backup System Files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
+" - Backup User Files: \n"
"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
"\n"
-"(AVERTO! Vi uzas XFS por via root-subdisko,\n"
-"krei startdisketon sur 1,44-mb-disketo verƝajne fiaskos,\n"
-"ĉar XFS bezonas tre grandan pelilon)."
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane. To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
msgstr ""
-"Akomodita startdisketo provizas manieron de starti via Linuksa sistemo\n"
-"sendepende de la normala startƝargilo. Ĉi tiu estas utila se vi ne deziras\n"
-"instali SILO sur via sistemo, aĆ­ alia mastruma sistemo forigas SILO,\n"
-"aƭ SILO ne funkcias kun via aparato-konfiguraĔo. Akomodita startdisketo "
-"ankaĆ­\n"
-"povas esti uzata kun la Mandrejka savdisko, kiu plifaciligas resaniĝi de\n"
-"severaj sistemaj paneoj.\n"
-"\n"
-"Se vi deziras krei startdisketon por via sistemo, enƝovu disketon en la\n"
-"unua drajvo kaj klaku \"JES\"."
-#: ../../bootloader.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Vi ne povas instali la startƝargilon en %s-subdiskon\n"
+msgid "comma separated strings"
+msgstr "eroj disigitaj per komo"
-#: ../../bootloader.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "not enough room in /boot"
-msgstr "mankas sufiĉe da spaco en /boot"
+msgid "These are the machines from which the scanners should be used:"
+msgstr ""
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Messages"
+msgstr "mesaĝoj"
+
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "La emfazata enskribo startos auxtomate post %d sekundoj."
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr ""
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "ordonoj antaux startado, aux 'c' por uzi komandan linion."
+msgid "POP and IMAP Server"
+msgstr "Serviloj POP kaj IMAP"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-"Premu la enenklavon por starti la elektatan mastruman sistemon, 'e' por\n"
-"redakti la"
+msgid "Mexico"
+msgstr "Meksikio"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model stepping"
+msgstr "Formatas"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Uzu la %c kaj %c klavoj por elekti kiun enskribon estas emfazata."
+msgid "Rwanda"
+msgstr "Ruando"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Bonvenon al GRUB la elektilo por mastrumaj sistemoj!"
+msgid "Do you have any %s interfaces?"
+msgstr "Ĉu vi havas iun %s interfacon?"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Switzerland"
+msgstr "Svislando"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Grub"
-msgstr ""
+msgid "Brunei Darussalam"
+msgstr "Brunejo Darusalamo"
-#: ../../bootloader.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "LILO with text menu"
-msgstr ""
+msgid "Remote lpd Printer Options"
+msgstr "Malproksimaj lpd Printilaj Opcioj"
-#: ../../bootloader.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "LILO with graphical menu"
+msgid ""
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
+"\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
msgstr ""
-#: ../../bootloader.pm:1
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Configure Internet Access..."
+msgstr "Konfiguru servojn"
+
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "SILO"
-msgstr ""
+msgid "Norway"
+msgstr "Norvegio"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Danish"
+msgstr "Dana"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
msgstr ""
-"Bonvenon al %s, la mastruma sistema elektilo!\n"
-"\n"
-"Elektu mastruman sistemon de la supra listo aux\n"
-"atendu dum %d sekundoj por defauxlta starto.\n"
-"\n"
-#: ../../common.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "consolehelper missing"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
msgstr ""
+"Bonvole enigu la IP-an konfigurñjon por ĉi tiu komputilo.\n"
+"Ĉiu ero devus esti enigata kiel IP-adreson en punktita-decimala notacio\n"
+"(ekzemple, 1.2.3.4)."
-#: ../../common.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "kdesu missing"
-msgstr "kdesu mankas"
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
+msgstr ""
-#: ../../common.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Ekranfotoj haveblos post instalado en %s"
+msgid "Processors"
+msgstr "Procesiloj"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "Mi ne povas fari ekranfotojn antaĆ­ ol fari subdiskojn"
+msgid "Bulgaria"
+msgstr "Bulgario"
-#: ../../common.pm:1
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekundoj"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "No NIC selected!"
+msgstr "Ne konektita"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "1 minute"
-msgstr "1 minuto"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr "Spicbergo kaj Jan-Majen-Insuloj"
-#: ../../common.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "%d minutes"
-msgstr "%d minutoj"
+msgid ""
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
+msgstr ""
-#: ../../common.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "TB"
-msgstr "TB"
+msgid "partition %s is now known as %s"
+msgstr "subdisko %s estas nun konata kiel %s"
-#: ../../common.pm:1
-#, c-format
-msgid "GB"
-msgstr "GB"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup Other files..."
+msgstr "Malbona rezerva dosiero"
-#: ../../common.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "MB"
-msgstr "MB"
+msgid "SMB server IP"
+msgstr "IP de SMB servilo"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "KB"
-msgstr "KB"
+msgid "Congo (Kinshasa)"
+msgstr "Kongo (KinƝaso)"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "United States"
-msgstr "Usono"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "La subdisktabelo de drajvo %s estos skribata al disko!"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Austria"
-msgstr "AĆ­strio"
+msgid "Installing HPOJ package..."
+msgstr "Instalanta pakaĔon HPOJ..."
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "Italy"
-msgstr "Italio"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr ""
+"Akomodita startdisketo provizas manieron de starti via Linuksa sistemo\n"
+"sendepende de la normala startƝargilo. Ĉi tiu estas utila se vi ne deziras\n"
+"instali LILO (aĆ­ grub) sur via sistemo, aĆ­ alia mastruma sistemo forigas "
+"LILO,\n"
+"aĆ­ LILO ne funkcias kun via komputilo. Akomodita startdisketo ankaĆ­ povas\n"
+"esti uzata kun la Mandrejka savdisko, kiu plifaciligas resaniĝi de severaj\n"
+"sistemaj paneoj. Ĉu vi deziras krei startdisketo por via sistemo?\n"
+"%s"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Netherlands"
-msgstr "Nederlando"
+msgid ", USB printer \\#%s"
+msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Sweden"
-msgstr "Svedio"
+msgid "Latvian"
+msgstr "Latva"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Norway"
-msgstr "Norvegio"
+msgid "monthly"
+msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Greece"
-msgstr "Grekio"
+msgid "Module name"
+msgstr "Modulonomo"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Germany"
-msgstr "Germanio"
+msgid "Start at boot"
+msgstr "Startu ĉe starto"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Czech Republic"
-msgstr "la ĈeĄa Respubliko"
+msgid "Use Incremental Backups"
+msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Belgium"
-msgstr "Belgio"
+msgid "First sector of drive (MBR)"
+msgstr "Unu sektoro de drajvo (ĈefStartRikordo)"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "France"
-msgstr "Francio"
+msgid "Joystick"
+msgstr "Ludbastono"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Costa Rica"
-msgstr "Kostariko"
+msgid "El Salvador"
+msgstr "Salvadoro"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Eraro dum malfermado de %s por skribi: %s"
+msgid "Use Unicode by default"
+msgstr "Uzu Unikodon defaĆ­lte"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Nothing to do"
+msgid "the module of the GNU/Linux kernel that handles the device"
msgstr ""
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Ne sufiĉe da libera spaco por aƭtomate disponigi novajn subdiskojn"
+msgid "Trying to rescue partition table"
+msgstr "Provas savi subdisktabelon"
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Vi ne povas uzi kriptan dosiersistemon por surmetingo %s"
+msgid "Option %s must be an integer number!"
+msgstr ""
-#: ../../fsedit.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
+"Entries you'll have to fill:\n"
+"%s"
msgstr ""
-"Vi bezonas veran dosiersistemon (ext2, reiserfs, xfs aĆ­ jfs) por tiu "
-"surmetingo\n"
-#: ../../fsedit.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Ĉi tiu dosierujo devus resti interne de la radika dosierosistemo (/)"
+msgid "Unable to start live upgrade !!!\n"
+msgstr ""
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Vi ne povas uzi LVM-logikan subdiskon por kroĉpunkto %s"
+msgid "Name: "
+msgstr "Nomo: "
-#: ../../fsedit.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"Vi elektis softvaran RAID-an subdiskon por la radika dosiersistemo (/).\n"
-"Neniu startƝargilo povas trakti tion sen /boot subdisko.\n"
-"Bonvole zorgu aldoni /boot subdiskon."
+msgid "16 million colors (24 bits)"
+msgstr "16 milionoj koloroj (24 bitoj)"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Jam estas subdisko kun surmetingo ĉe %s\n"
+msgid "Allow all users"
+msgstr "Permesu ĉiujn uzulojn"
-#: ../../fsedit.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "Surmetingoj devas enteni nur alfanumerajn signojn"
+msgid "The official MandrakeSoft Store"
+msgstr ""
-#: ../../fsedit.pm:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Surmetingoj devas komenci kun antaĆ­a /"
+msgid "Resizing"
+msgstr "Regrandecigas"
-#: ../../fsedit.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Vi ne povas uzi ReiserFS por subdisko pli malgranda ol 32MB"
+msgid "Cable connection"
+msgstr "Kabla konekto"
-#: ../../fsedit.pm:1
-#, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Vi ne povas uzi JFS por subdisko pli malgranda ol 16MB"
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "User"
+msgstr "Salutnomo"
#: ../../fsedit.pm:1
#, c-format
@@ -977,827 +1525,243 @@ msgstr ""
"\n"
"Ĉu vi konsentas perdi ĉiujn subdiskojn?\n"
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Error"
-msgstr "Eraro"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr ""
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "server"
-msgstr "servilo"
+msgid "Printer on parallel port \\#%s"
+msgstr "Presilo sur paralela pordo \\#%s"
-#: ../../fsedit.pm:1
-#, c-format
-msgid "with /usr"
-msgstr "kun /usr"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Name"
+msgstr "Nomo: "
-#: ../../fsedit.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "simple"
-msgstr "simpla"
+msgid "mkraid failed"
+msgstr "mkraid malsukcesis"
-#: ../../fs.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Enabling swap partition %s"
-msgstr "Ebligas swap-subdiskon %s"
+msgid "Button 3 Emulation"
+msgstr ""
-#: ../../fs.pm:1 ../../partition_table.pm:1
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "eraro dum malmunti %s: %s"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files..."
+msgstr "Konservu en dosiero"
-#: ../../fs.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
+msgid "Israeli (Phonetic)"
+msgstr "Israela (fonetika)"
-#: ../../fs.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mounting partition %s"
-msgstr "Enkroĉas subdiskon %s"
+msgid "access to rpm tools"
+msgstr "aliro al rpm-iloj"
-#: ../../fs.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Checking %s"
-msgstr "Kontrolanta %s"
+msgid "edit"
+msgstr ""
-#: ../../fs.pm:1
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatas subdiskon %s"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "You must choose/enter a printer/device!"
+msgstr "Printila Aparato URI"
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Kreas kaj formatas dosieron %s"
+msgid "Permission problem accessing CD."
+msgstr ""
-#: ../../fs.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "ne scias kiel formati %s kiel speco %s"
+msgid "Phone number"
+msgstr "Telefonnumero"
-#: ../../fs.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatado de %s malsukcesis"
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr "Eraro: La \"%s\"-pelilo por via sonkarto ne estas listigita"
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer name, description, location"
+msgstr "Printilan Konekton"
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
+msgid "USA (broadcast)"
msgstr ""
-#: ../../help.pm:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
-msgstr ""
+"Please choose the\n"
+"media for backup."
+msgstr "Bonvole, elektu lingvon por uzi."
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
-msgstr ""
+msgid "Use Xinerama extension"
+msgstr "Uzu Xinerama extension"
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
+msgid "Loopback"
+msgstr "Retrokonektado"
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
msgstr ""
+"Ne povis ĝuste fermi mkbootdisk-on: \n"
+" %s \n"
+" %s"
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"DrakX unue detektos iujn IDE-aparatojn en via komputilo. Ĝi ankaƭ\n"
-"serĉas unu aƭ plurajn PCI-SCSI-kartojn en via sistemo. Se SCSI-karto\n"
-"estas trovita, DrakX aĆ­tomate instalos la taĆ­gan pelilon.\n"
-"\n"
-"Ĉar detektado de aparataro ne estas absolute senerara, DrakX povas\n"
-"malsukcesi detektante viajn fiksdiskojn. Se tiel, vi devos mem mane entajpi\n"
-"vian aparataron.\n"
-"\n"
-"Se vi devis mane entajpi vian PCI-SCSI-adaptilon, DrakX demandos ĉu vi\n"
-"deziras konfiguri opciojn por ĝi. Prefere permesu al DrakX provi la "
-"aparatojn\n"
-"por la kartospecifaj opcioj kiuj estas bezonataj por inici la adaptilon. "
-"Plej ofte,\n"
-"DrakX trairos tiun paƝon sen ajna problemo.\n"
-"\n"
-"Se DrakX ne kapablas provi kiujn parametrojn la opcioj aĆ­tomate devas doni "
-"al la\n"
-"aparatoj, vi devos mane konfiguri la pelilon."
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "West Europe"
+msgstr "EĆ­ropo"
-#: ../../help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
msgstr ""
-"Nun estas tempo por elekti pressistemon por via komputilo. Aliaj mastrum-"
-"sistemoj\n"
-"proponas al vi unu, sed Linuks-Mandrako proponas du. Ĉiu el la pressistemoj\n"
-"plej taĆ­gas por aparta tipo de konfigurado.\n"
-"\n"
-" * \"pdq\" -- kio estas akronimo por \"print, don't queue\" (presu, ne "
-"vicigu), elektindas\n"
-"se vi havas rektan konekton kun via presilo, vi Ɲatus eskapi el problemoj "
-"kun\n"
-"aliaj presiloj, kaj vi ne havas retajn presilojn. (\"pdq\"\n"
-"pritraktos nur tre simplajn retokazojn kaj estas iom malrapida se\n"
-"uzata kun retoj.) Konsilindas uzi \"pdq\" se tio ĉi estas via\n"
-"unua sperto kun GNU/Linukso.\n"
-"\n"
-" * \"CUPS\" - \"Common Unix Printing System\", estas bonega elekto por\n"
-"presigi vian lokan presilon aƭ iun ie tra la planedo. Ĝi estas\n"
-"facile konfigurebla kaj povas agi kiel servilo aĆ­ kiel kliento por la "
-"antaĆ­a\n"
-"\"lpd \" pressistemo, kaj estas kongrua kun pli malnovaj mastrum-sistemoj\n"
-"kiuj eble ankoraĆ­ bezonas presservojn. Kvankam tre potenca, la baza "
-"konfigurado\n"
-"estas preskaĆ­ same simpla kiel \"pdq\". Se vi bezonas imiti \"lpd\"-"
-"servilon,\n"
-"certiĝu ke vi aktivigis la \"cups-lpd\"-demonon. \"CUPS\" enhavas grafikajn\n"
-"'front-ends' por presi aĆ­ por elekti presil-opciojn kaj por mastrumi\n"
-"la presilon.\n"
+"[OPCIOJ] [PROGRAM_NOMO]\n"
"\n"
-"Se vi faras vian elekton nun, kaj poste trovas ke vi ne Ɲatas vian "
-"pressistemon,\n"
-"vi povas Ɲanĝi ĝin rulante PrinterDrake ekde la Mandraka KontrolCentro kaj\n"
-"alklaki la eksperto-butonon."
+"OPCIOJ:\n"
+" --help - montru tiun help-mesaĝon.\n"
+" --report - programo estu iu de mandrake tools\n"
+" --incident - programo estu iu de mandrake tools"
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Harddrake2 version %s"
+msgstr "Detektado de fiksdisko(j)"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
-msgstr ""
-"LILO kaj grub estas GNU/Linuksaj startigiloj. Normale, tiu paƝo estas "
-"komplete\n"
-"aĆ­tomata. DrakX analizos la startsektoron de la disko kaj agas laĆ­ tio\n"
-"kion ĝi trovas tie:\n"
-"\n"
-" * se ĝi trovas vindozan startsektoron, ĝi anstataƭigos tiun per grub/LILO-"
-"a startsektoro.\n"
-"Tiel vi povos Ɲargi aƭ GNU/Linukson aƭ alian mastrumsistemon.\n"
-"\n"
-" * se ĝi trovas grub- aƭ LILO-startsektoron, ĝi anstataƭigos tiun per "
-"nova.\n"
-"\n"
-" * se ĝi ne povas determini, DrakX demandos vin kien ĝi metu la\n"
-"startigilon.\n"
-"\n"
-"\"Boot device\": En plej multaj okazoj, vi ne Ɲanĝu la defaƭltan (\"Unua\n"
-"sektoro de la disko (MBR)\"), sed se vi preferas, la startigilo povas esti\n"
-"instalata sur la dua fiksdisko (\"/dev/hdb\"), aƭ eĉ sur disketo\n"
-"(\"Sur disketo\")."
+msgid "Copying %s"
+msgstr "Kopianta %s"
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "Choose color"
+msgstr "Elektu ekranon"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-"Post kiam vi konfiguris la ĝeneralajn startigil-parametrojn, afiƝiĝos la "
-"isto de\n"
-"startopcioj kiuj haveblas ĉe starto.\n"
-"\n"
-"Se estas en via maƝino aliaj mastrum-sistemoj, ili estas aƭtomate aldonitaj\n"
-"al la startmenuo. Vi povas fajnigi la ekzistantajn opciojn\n"
-"klikante al \"Aldonu\" por krei novan kampon, elektante opcion kaj\n"
-"klikante sur \"Modifi\" aƭ \"Forigi\" por modifi aƭ forigi ĝin. \"Jes\" "
-"validigas\n"
-"viajn Ɲanĝojn.\n"
-"\n"
-"Vi eble ne deziras doni aliron al tiuj aliaj mastrum-sistemoj por iu ajn "
-"kiu\n"
-"iras al la konzolo kaj restartigas la maƝinon. Vi povas forigi la "
-"tiurilatajn\n"
-"enskribojn por forigi ilin de la startila menuo, sed tiam vi bezonos "
-"startdisketon por\n"
-"startigi tiujn aliajn mastrumsistemojn!"
+msgid "Dominican Republic"
+msgstr "Domingo"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
-msgstr ""
+msgid "Swaziland"
+msgstr "Svazilando"
-#: ../../help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
+msgid "Set-UID"
msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you are using CDRW media"
+msgstr "Bonvolu klaki sur subdiskon"
+
#: ../../help.pm:1
#, c-format
msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
msgstr ""
-"Bonvolu elekti la ĝustan pordon. Ekzemple, la \"COM1\"-a\n"
-"pordo sub MS Vindozo estas nomata \"ttyS0\" sub GNU/Linukso."
-#: ../../help.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
+msgid " on parallel port \\#%s"
msgstr ""
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
-msgstr ""
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "Uzu la %c kaj %c klavoj por elekti kiun enskribon estas emfazata."
-#: ../../help.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
+msgid "Generic 2 Button Mouse"
+msgstr "Nespecifa 2 Butona Muso"
-#: ../../help.pm:1
+#: ../../lvm.pm:1
#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
+msgid "Remove the logical volumes first\n"
+msgstr "Forigu la logikajn spacojn unue\n"
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "La emfazata enskribo startos auxtomate post %d sekundoj."
-#: ../../help.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Internet access"
+msgstr "Interreto"
+
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
+"y coordinate of text box\n"
+"in number of characters"
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
+msgid "Enabling servers..."
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
+msgid "Printing test page(s)..."
+msgstr "Printas provpaĝo(j)n..."
-#: ../../help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
+msgid "There is already a partition with mount point %s\n"
+msgstr "Jam estas subdisko kun surmetingo ĉe %s\n"
#: ../../help.pm:1
#, c-format
@@ -1818,234 +1782,165 @@ msgid ""
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
msgstr ""
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
+msgid "Ukraine"
+msgstr "Ukrajno"
-#: ../../help.pm:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Application:"
+msgstr "AĆ­tentikigado"
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
+msgid "External ISDN modem"
+msgstr "Eksterna ISDN-modemo"
-#: ../../help.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
+msgid "if set to yes, report check result by mail."
msgstr ""
-#: ../../help.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
+msgid "Your choice? (default %s) "
+msgstr "Via elektaĔo? (defaƭlo estas %s) "
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
msgstr ""
-#: ../../help.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid " / Region"
+msgstr "Reunio"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
+"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
-"Test\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
"\n"
-"Options\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
-" You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
-#: ../../help.pm:1
-#, c-format
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
msgstr ""
+"Provpaĝo(j)n estis sendataj al la printila demono.\n"
+"Ĉi tiu eble postulas iom da tempo antaƭ ol la printilo komencas.\n"
+"Printada stato:\n"
+"%s\n"
+"\n"
+"Ĉu ĝi ĝuste funkcias?"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
+msgid "daily"
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "and one unknown printer"
+msgstr "Neniu printilo"
+
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Tiu ĉi dialogo uzeblas por elekti kiujn servojn vi deziras startigi kiam vi "
-"startigas\n"
-"vian komputilon.\n"
-"DrakX listigos ĉiujn servojn atingeblajn en la nuna instalaÄ”o.\n"
-"Kontrolu ĉiujn zorge kaj malelektu tiujn kiuj ne estas ĉiam bezonataj\n"
-"dum la starto.\n"
-"Kiam via muso estas supre de ero, malgranda balono\n"
-"ekaperas por helpi vin. Ĝi priskribas la rolon de la servo.\n"
-"Tamen, se vi ne certas ĉu iu servo utilas aƭ ne, prefere lasu la defaƭltan "
-"sintenon.\n"
-"\n"
-"!!Zorgegu en ĉi tiu paƝo se vi intencas uzi vian komputilon kiel servilo:\n"
-"ne startu servojn kiujn vi ne bezonas. Memoru ke certaj servoj povas esti\n"
-"danĝeraj se ili estas aktivigitaj en servilo. Ĝenerale,\n"
-"elektu nur tiujn servojn kiujn vi vere bezonas.\n"
-"!!"
+msgid "Ireland"
+msgstr "Irlando"
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
+msgid "kernel version"
+msgstr "Kerna versio"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid " Restore Configuration "
+msgstr "Reta KonfiguraĔo"
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Is this the correct setting?"
+msgstr "Ĉu tiu ĉi konfigurado ĝustas?"
#: ../../help.pm:1
#, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
@@ -2060,5947 +1955,6098 @@ msgid ""
"installed and use the program described there to configure your connection."
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Wizard Configuration"
+msgstr "LAN KonfiguraĔo"
+
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
+msgid "Autoprobe"
+msgstr "AĆ­tomate esploru"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
+msgid "Backup system files..."
msgstr ""
-#: ../../help.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
+msgid "Can't use broadcast with no NIS domain"
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Removing printer \"%s\"..."
+msgstr "Foriganta presilon \"%s\"..."
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "drakfloppy"
+msgstr "drakfloppy"
+
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"Please indicate where the auto_install.cfg file is located.\n"
"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
+msgid "information level that can be obtained through the cpuid instruction"
msgstr ""
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
-msgstr ""
+msgid "Peru"
+msgstr "Peruo"
-#: ../../install2.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid " on device: %s"
+msgstr "Musaparato: %s\n"
+
+#: ../../install_interactive.pm:1
#, c-format
-msgid "You must also format %s"
-msgstr ""
+msgid "Remove Windows(TM)"
+msgstr "Forigu Vindozon"
-#: ../../install2.pm:1
+#: ../../services.pm:1
+#, c-format
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr "Startigas la X tiparan servilon (tio estas ... ."
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
msgstr ""
-#: ../../install_any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
+msgid "Select the font file or directory and click on 'Add'"
msgstr ""
-"Eraro okazis - neniuj validaj aparatoj estis trovata sur kiuj vi povas krei "
-"novajn dosiersistemojn. Bonvolu kontroli vian ekipaÄ”on por la kaĆ­zo de ĉi "
-"tiu problemo."
-#: ../../install_any.pm:1 ../../partition_table.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Error reading file %s"
-msgstr "Eraro legante dosiero %s"
+msgid "Madagascar"
+msgstr "Madagaskaro"
-#: ../../install_any.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
+msgid "Urpmi"
msgstr ""
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This floppy is not FAT formatted"
+msgid "Cron not available yet as non-root"
msgstr ""
-#: ../../install_any.pm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "EnƝovu FAT-formatitan disketon en drajvo %s"
+msgid "System"
+msgstr "Sistemo"
-#: ../../install_any.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
+msgid "Do you want to use this feature?"
+msgstr "Ĉu vi deziras uzi tiun funkcion?"
-#: ../../install_any.pm:1
+#: ../../keyboard.pm:1
#, c-format
+msgid "Arabic"
+msgstr "araba"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
+"- Options:\n"
+msgstr "Opcioj"
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Password required"
+msgstr "Pasvorto"
+
+#: ../../common.pm:1
#, c-format
-msgid "No"
-msgstr "Ne"
+msgid "%d minutes"
+msgstr "%d minutoj"
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Yes"
-msgstr "Jes"
+msgid "Graphics card: %s"
+msgstr "Grafika karto: %s"
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
+msgid "WebDAV transfer failed!"
msgstr ""
-#: ../../install_gtk.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "System configuration"
-msgstr "Sistem-konfigurado"
+msgid "XFree configuration"
+msgstr "XFree Konfigurado"
-#: ../../install_gtk.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "System installation"
-msgstr "Sistem-nstalado"
+msgid "Choose action"
+msgstr "Elektu agon"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Bringing down the network"
-msgstr "Haltas de la reto"
+msgid "French Polynesia"
+msgstr "Franca Polinezio"
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Bringing up the network"
-msgstr "Startado de la reto"
+msgid ""
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Dispartigado malsukcesis: %s"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "Subteno de OKI 4w kaj kongruaj winpresiloj."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "La Dispartigsorĉilo de DrakX trovis ĉi tiujn solvojn:"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr ""
+"Lanĉu la ALSA (Advanced Linux Sound Architecture - Avancita Linuksa Son-"
+"Arkitekturo)-sonsistemon"
-#: ../../install_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "I can't find any room for installing"
-msgstr "Mi ne trovas spacon por instali"
+msgid "Installing driver for %s card %s"
+msgstr "Instalas pelilon por %s karto %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
msgstr ""
-"Nun vi povas dispartigi %s.\n"
-"Kiam vi finiĝos, ne forgesu savi kun `w'."
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use fdisk"
-msgstr "Uzu fdisk"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Enable Server"
+msgstr "Datumbazoj"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Custom disk partitioning"
-msgstr "subdiskigo"
+msgid "Ukrainian"
+msgstr "Ukrajna"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
msgstr ""
-"Ĉiuj ekzistantaj subdiskoj kaj iliaj datenoj estos perdata sur drajvo %s"
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Vi havas pli ol unu fiksdisko, sur kiu vi deziras instali Linukson?"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "EnƝovu la uzitan startigan disketon en drajvo %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Erase entire disk"
-msgstr "ForviƝu la tutan diskon"
+msgid "Local network(s)"
+msgstr "Loka(j) reto(j)"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Remove Windows(TM)"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
msgstr "Forigu Vindozon"
-#: ../../install_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
msgstr ""
-"Ne ekzistas FAT-a subdisko por regrandecigi\n"
-"(aƭ ne estas sufiĉe da spaco)"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
+msgid "Firewire controllers"
+msgstr "Firewire-kontroliloj"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
+"\n"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
msgstr ""
+"Post kiam vi konfiguris la ĝeneralajn startigil-parametrojn, afiƝiĝos la "
+"isto de\n"
+"startopcioj kiuj haveblas ĉe starto.\n"
+"\n"
+"Se estas en via maƝino aliaj mastrum-sistemoj, ili estas aƭtomate aldonitaj\n"
+"al la startmenuo. Vi povas fajnigi la ekzistantajn opciojn\n"
+"klikante al \"Aldonu\" por krei novan kampon, elektante opcion kaj\n"
+"klikante sur \"Modifi\" aƭ \"Forigi\" por modifi aƭ forigi ĝin. \"Jes\" "
+"validigas\n"
+"viajn Ɲanĝojn.\n"
+"\n"
+"Vi eble ne deziras doni aliron al tiuj aliaj mastrum-sistemoj por iu ajn "
+"kiu\n"
+"iras al la konzolo kaj restartigas la maƝinon. Vi povas forigi la "
+"tiurilatajn\n"
+"enskribojn por forigi ilin de la startila menuo, sed tiam vi bezonos "
+"startdisketon por\n"
+"startigi tiujn aliajn mastrumsistemojn!"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Regrandeciĝo de FAT malsukcesis: %s"
+msgid "System mode"
+msgstr "Sistema modalo"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Resizing Windows partition"
-msgstr "Kalkulas Vindozajn dosiersistemajn limojn"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
+msgstr ""
+"Por print al NetWare printilo, vi devas provizi la NetWare printservilan\n"
+"nomon (Notu! Ĝi eble estas malsama de ĝia TCP/IP nomo!) aldone al la\n"
+"printvican nomon por la printilo vi deziras atingi kaj iun ajn taĆ­gan\n"
+"salutnomon kaj pasvorton."
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Resizing"
-msgstr "Regrandecigas"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Netmask:"
+msgstr "Retmasko"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "partition %s"
-msgstr "subdisko: %s"
+msgid "Append"
+msgstr "Alfiksu"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Kiun grandecon vi deziras teni por Vindozo?"
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"WARNING!\n"
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
+"\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
+"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
+"\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
msgstr ""
-"AVERTO!\n"
+
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid ""
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
-"DrakX nun regrandecigos vian Vindozan subdiskon. Zorgu:\n"
-"ĉi tiu operacio estas danĝera. Se vi ne jam faris ĝin,\n"
-"vi prefere antaĆ­e eliru el la instalado, uzu\n"
-"\"scandisk\" sub Vindozo (kaj laƭvole rulu \"defrag\"), kaj sekve relanĉu "
-"la\n"
-"instaladon. Vi prefere faru ankaĆ­ rezervan kopion de via datenoj.\n"
-"Kiam vi estos certa, klaku \"Jeso\"."
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
+"\n"
+"It also provides a much higher API than OSS.\n"
+"\n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
+msgstr ""
+"OSS (Open Sound System - Libera Sonsistemo) estis la nuna son-API. Ĝi estas "
+"son-API "
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
+"\n"
+"You may prefer to replay the installation.\n"
msgstr ""
-"Via Vindoza subdisko estas tro fragmentigata, bonvole uzu ``defrag'' antaĆ­e"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Kalkulante la liberan spacon sur la Vindoza subdisko"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Network printer \"%s\", port %s"
+msgstr "Reta Printilo (TCP/ingo)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
msgstr ""
-"La regrandecigilo por la FAT (Dosiero-Atingo-Tablo) ne povas trakti\n"
-"vian subdiskon, la sekvanta eraro okazis: %s"
+"Bonvole elektu kiun retadaptilon estos konektata al via Loka Reto (LAN)."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Kiun subdiskon vi deziras regrandecigi?"
+msgid "OK to restore the other files."
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Uzu la liberan spacon sur la Vindoza subdisko"
+msgid "Please choose your keyboard layout."
+msgstr "Bonvole elektu vian klavar-aranĝon."
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"Ne ekzistas FAT-a subdiskoj por regrandecigi\n"
-"aƭ uzi kiel retrokonektaj subdiskoj (aƭ ne estas sufiĉa da spaco)spaco)"
+msgid "Printer Device URI"
+msgstr "Printila Aparato URI"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Swap partition size in MB: "
-msgstr "InterƝanĝa subdiska grandeco en MB: "
+msgid "Not erasable media!"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Root partition size in MB: "
-msgstr "Radikosubdiska grandeco en MB: "
+msgid "Terminal-based"
+msgstr "Finaparato-bazata"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the sizes"
-msgstr "Elektu la grandecojn"
+msgid "Installing a printing system in the %s security level"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Kiun subdiskon vi deziras uzi por Linux4Win?"
+msgid "The user name is too long"
+msgstr "Ĉi tiu salutnomo estas tro longa"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Uzu la Vindoza subdiskon por retrokonektado"
+msgid "Other OS (windows...)"
+msgstr "Alia Mastruma Sistemo (Vindozo...)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "There is no existing partition to use"
-msgstr "Ne ekzistas subdiskojn por uzi"
+msgid "WebDAV remote site already in sync!"
+msgstr ""
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use existing partitions"
-msgstr "Uzu ekzistantajn subdiskojn"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Reading printer database..."
+msgstr "Legas datumbason de CUPS peliloj..."
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Mankas sufiĉan da libera spaco por disponigi novajn subdiskojn"
+msgid "Generate auto install floppy"
+msgstr "Kreu aĆ­toinstalan disketon"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use free space"
-msgstr "Uzu liberan spacon"
+msgid ""
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
+msgstr ""
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Vi devas havi FAT-subdiskon en /boot/efi"
+msgid "Somalia"
+msgstr "Somalujo"
-#: ../../install_interactive.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
+msgid "No open source driver"
+msgstr "Nenia liberfonta pelilo"
+
+#: ../../security/level.pm:1
+#, fuzzy, c-format
msgid ""
-"You don't have a swap partition.\n"
-"\n"
-"Continue anyway?"
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
msgstr ""
-"Vi ne havas interƝanĝan subdiskon\n"
-"\n"
-"Ĉu vi deziras daƭri tamen?"
+"Ni uzas aspektojn de la kvara nivelo, sed nun la komputilo estas tute\n"
+"malfermita. Sekurecaj aspektoj estas ĉe iliaj maksimumoj."
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Vi devas havi radikan subdiskon.\n"
-"Por ĉi tiu, kreu subdiskon (aƭ klaku estantan).\n"
-"Sekve elektu la agon \"Surmetingo\" kaj faru ĝin '/'"
+msgid "Nicaragua"
+msgstr "Nikaragvo"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Iuj aparatoj sur via komputilo bezonas \"proprietajn\" pelilojn por "
-"funkcii.\n"
-"Vi povas trovi iun informon pri ili ĉe: %s"
+msgid "New Caledonia"
+msgstr "Nov-Kaledonio"
-#: ../../install_messages.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
+msgid "European protocol (EDSS1)"
+msgstr "EĆ­ropa protokolo (EDSS1)"
-#: ../../install_messages.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr ""
+msgid "Video mode"
+msgstr "Grafika reĝimo"
-#: ../../install_messages.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Please enter your email address below "
+msgstr "Bonvole provu denove"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Averto\n"
-"Bonvolu zorge legi la suban tekston. Se vi malsamopinias kun iu\n"
-"parto, vi ne rajtas instali la venontan KD-enhavon. Premu 'Rifuzas'\n"
-"por daĆ­rigi la instaladon sen uzi tiun KD-enhavon.\n"
-"\n"
-"\n"
-"Iuj komponantoj entenataj en la venonta KD ne estas regataj\n"
-"de la GPL-licenco aƭ similaj interkonsentoj. Ĉiu tia komponanto estas\n"
-"tiam regata de la teksto kaj kondiĉoj de ĝia propra specifa licenco.\n"
-"Bonvolu zorge legi tiajn specifajn licencojn kaj agi laĆ­ ili antaĆ­\n"
-"ol uzi aĆ­ redisdoni la nomitajn komponantojn.\n"
-"Tiaj licencoj ĝenerale malhelpas transdonon, duobligon\n"
-"(escepte por savkopioj), redistribuadon, 'reverse engineering',\n"
-"malmuntadon, malkompiladon aĆ­ modifadon de la komponento.\n"
-"Ĉia rompo de la konsento tuj ĉesigos viajn rajtojn sub\n"
-"la respektiva licenco. Escepte se la specifa licenco donas al vi tiajn\n"
-"rajtojn, vi kutime ne povas instali la programojn sur pli ol unu\n"
-"sistemo, aƭ adapti ĝin por uzi ĝin en reto. En duba kazo bonvole kontaktu\n"
-"rekte la disdoninton aĆ­ la eldoninton de la komponanto.\n"
-"Transdonado al triaj partoj aĆ­ kopiado de tiaj komponantoj inkluzive de la \n"
-"dokumentaĔo normale estas malpermesita.\n"
-"\n"
-"\n"
-"Ĉiuj rajtoj pri la komponantoj de la venonta KD apartenas al ties\n"
-"respektivaj aĆ­toroj kaj estas protektataj de leĝoj pri intelekta propraÄ”o "
-"kaj\n"
-"kopirajto aplikeblaj al softvaraj programoj.\n"
+msgid "Oman"
+msgstr "Omano"
-#: ../../install_messages.pm:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-msgstr ""
-"Enkonduko\n"
-"\n"
-"La mastrum-sistemo kaj la diversaj komponantoj atingeblaj en la Mandrako- "
-"Linuks-eldono\n"
-"estu en la sekvo nomataj la \"softvarproduktoj\". La softvarproduktoj "
-"inkluzivigas la tutaĔon de programoj, metodoj, reguloj kaj dokumentado "
-"koncerne la mastruman sistemon,\n"
-"kaj la diversajnf komponantojn de la Mandrako-Linuks-eldono, sed\n"
-"ne estas limigitaj al ili.\n"
-"\n"
-"\n"
-"1. Licenckonsento \n"
-"Bonvole legu tiun ĉi dokumenton zorge. Tiu ĉi dokumento estas licenckonsento "
-"inter vi kaj\n"
-"MandrakeSoft S.A. kiu aplikiĝas al la softvarproduktoj.\n"
-"Per instalado, duobligado aĆ­ uzado de la softvarproduktoj en ajna maniero, "
-"vi eksplicite\n"
-"akceptas kaj plene konsentas agi konforme al la teksto kaj kondiĉoj de tiu "
-"ĉi licenco.\n"
-"Se vi malsamopinias kun iu ajn parto de la licenco, vi ne rajtas instali, "
-"duobligi aĆ­ uzi\n"
-"la softvarproduktojn.\n"
-"Iu ajn provo instali, duobligi aĆ­ uzi la softvarproduktojn en maniero kiu ne "
-"kongruas kun la teksto kaj kondiĉoj de tiu ĉi licenco estas\n"
+msgid "Network Monitoring"
+msgstr "Reta KonfiguraĔo"
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Eniras paƝon `%s'\n"
+msgid "SunOS"
+msgstr "SunOS"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Help"
-msgstr "Helpo"
+msgid "New size in MB: "
+msgstr "Nova grandeco en MB: "
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "not configured"
-msgstr "ne konfigurita"
+msgid "Partition table type: %s\n"
+msgstr "Subdiskotabelospeco: %s\n"
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Configure"
-msgstr "Konfiguru"
+msgid "Authentication Windows Domain"
+msgstr "AĆ­tentikigado Vondoza Domajno"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Go on anyway?"
-msgstr "Ĉu vi deziras daƭri tamen?"
+msgid "US keyboard"
+msgstr "Usona klavaro"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "There was an error installing packages:"
-msgstr "Estis eraro dum instalado de pakaĔoj:"
+msgid "Buttons emulation"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Estis eraro ordigi pakaĔojn:"
+msgid ", network printer \"%s\", port %s"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Change your Cd-Rom!\n"
"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Ɯanĝu vian KDROM!\n"
+"Drakbackup activities via tape:\n"
"\n"
-"Bonvole, enƝovu la KDROM-on etikedatan \"%s\" en via drajvo kaj klaku \"Jes"
-"\"\n"
-"kiam vi finos.\n"
-"Se vi ne havas ĝin, klaku \"Nuligu\" por eviti la instaladon de ĉi tiu KDROM."
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Refuse"
-msgstr "Malakceptu"
+msgid ""
+"\n"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Accept"
-msgstr "Akceptu"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Sending Speed:"
+msgstr "Konservu en dosiero"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Installing package %s"
-msgstr "Instalanta pakaĔo %s"
+msgid "Halt bug"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Mail alert configuration"
+msgstr "KonfiguraĔon"
+
+#: ../../lang.pm:1
#, c-format
-msgid "%d packages"
-msgstr "%d pakaĔoj"
+msgid "Tokelau"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No details"
-msgstr "Neniaj detaloj"
+msgid "Bosnian"
+msgstr "Bosna"
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Release: "
+msgstr "Bonvole atendu"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Details"
-msgstr "Detaloj"
+msgid "Connection speed"
+msgstr "Rapido de konekto"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Bonvole atenduj, mi preparas instaladon..."
+msgid ""
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Time remaining "
-msgstr "Tempo restanta "
+msgid "Namibia"
+msgstr "Namibio"
-#: ../../install_steps_gtk.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Estimating"
-msgstr "Taksas"
+msgid "Database Server"
+msgstr "Datumbaz-servilo"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Installing"
-msgstr "Instalanta"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Elektu la pakaĔojn kiuj vi deziras instali"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "Ne povas aldoni subdiskon al _formatita_ RAID md%d"
-#: ../../install_steps_gtk.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Minimal install"
-msgstr "Minimuma instalado"
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
+msgstr ""
+"Via karto povas havi 3D aparatan akceladon, sed nur kun XFree %s.\n"
+"NOTU KE ĈI TIO ESTAS EKSPERIMENTA SUBTENO KAJ EBLE SVENIGOS VIAN "
+"KOMPUTILON.\n"
+"XFree %s subtenas vian karton kiu eble havas pli bonan subtenon en 2D."
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Please wait, setting security options..."
+msgstr "Preparas instaladon"
+
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Updating package selection"
-msgstr "Ĝisdatigo de pakaÄ”-elekto"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Load/Save on floppy"
-msgstr "Ɯargu/Konservu sur disketo"
+msgid "Launch the graphical environment when your system starts"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "<- Previous"
-msgstr "<- AntaĆ­a"
+msgid "hourly"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Install"
-msgstr "Instalu"
+msgid " Successfuly Restored on %s "
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Show automatically selected packages"
-msgstr "Montru aƭtomate elektitajn pakaĔojn"
+msgid "Making printer port available for CUPS..."
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Vi ne povas malelekti ĉi tiun pakaÄ”on. Ĝi devus esti promociata."
+msgid "Antigua and Barbuda"
+msgstr "Antigvo-Barbudo"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""
-"Ĉi tiu pakaĔo devus esti promociata.\n"
-"Ĉu vi certas ke vi deziras malelekti ĝin?"
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "Vi ne povas malelekti ĉi tiun pakaÄ”on. Ĝi estas jam instalita."
+msgid "Spanish"
+msgstr "Hispana"
-#: ../../install_steps_gtk.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Ĉi tiu estas deviga pakaÄ”o, vi ne povas malelekti ĝin"
+msgid "Start"
+msgstr "Startu"
-#: ../../install_steps_gtk.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "You can't select/unselect this package"
-msgstr "Vi ne povas elektu/malelektu ĉi tiun pakaÄ”on"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
+msgstr ""
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "The following packages are going to be removed"
-msgstr "La sekvaj pakaĔoj estos malinstalataj"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Configuring applications..."
+msgstr "Konfiguru Printilon"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "The following packages are going to be installed"
-msgstr "La sekvaj pakaĔoj estos instalataj"
+msgid "Normal modem connection"
+msgstr "Normala modemo-konekto"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "File Selection"
+msgstr "Elektado de PakaĔoj"
+
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"You can't select this package as there is not enough space left to install it"
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+" tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+" standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
msgstr ""
-"Vi ne povas elekti ĉi tiun pakaÄ”on ĉar ne estas sufiĉe da spaco por instali\n"
-"ĝin."
-#: ../../install_steps_gtk.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
-msgid "Importance: %s\n"
-msgstr "Graveco: %s\n"
+msgid "CUPS"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Size: %d KB\n"
-msgstr "Grandeco: %d KB\n"
+msgid "Run config tool"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Version: %s\n"
-msgstr "Versio: %s\n"
+msgid "Bootloader installation"
+msgstr "StartƝargila instalado"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Name: %s\n"
-msgstr "Nomo: %s\n"
+msgid "Root partition size in MB: "
+msgstr "Radikosubdiska grandeco en MB: "
#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Bad package"
-msgstr "Malbona pakaĔo"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "Ĉi tiu estas deviga pakaÄ”o, vi ne povas malelekti ĝin"
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Other"
-msgstr "Alia"
+msgid "Etherboot ISO image is %s"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Tuta grandeco: %d / %d MB"
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"named (BIND) estas Domajna NomServilo (DNS) kiun vi uzas por trovi\n"
+"poƝtejojn de IP adresoj."
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Next ->"
-msgstr "Sekvanta ->"
+msgid "Disconnect..."
+msgstr "Malkonektu..."
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Individual package selection"
-msgstr "Elektado de individuaj pakaĔoj"
+msgid "Saint Lucia"
+msgstr "Sent-Lucio"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Report"
+msgstr "porto"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Package Group Selection"
-msgstr "Elektado de PakaĔaj Grupoj"
+msgid "Palau"
+msgstr "PalaĆ­o"
-#: ../../install_steps_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Via sistemo havas malmulte da risurcoj. Eble vi havos problemojn pri\n"
-"instali Linuks-Mandrejkon. Se tio okazos, vi povos anstataĆ­ provi tekstan\n"
-"instaladon. Por ĉi tio, premu `F1' kiam vi startas de KDROM, kaj sekve\n"
-"tajpu `text'."
+msgid "level"
+msgstr "nivelo"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Save packages selection"
-msgstr "Konservu la pakaÄ”-elekton"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Automated"
-msgstr "AĆ­tomata"
+msgid "Package Group Selection"
+msgstr "Elektado de PakaĔaj Grupoj"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Replay"
-msgstr "Reludu"
+msgid "Restore Via Network Protocol: %s"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
+msgid "You can configure each parameter of the module here."
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Generate auto install floppy"
-msgstr "Kreu aĆ­toinstalan disketon"
+msgid "Choose the resolution and the color depth"
+msgstr "Elektu distingivon kaj kolorprofundon"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Reboot"
-msgstr "Restarto"
+msgid "Emulate third button?"
+msgstr "Ĉu vi deziras emuli trian musbutonon?"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
msgstr ""
-"Kelkaj paƝoj ne finiĝis.\n"
-"\n"
-"Ĉu vi vere volas ĉesi nun?"
+"Vi ne povas krei novan subdiskon\n"
+"(ĉar vi atingis la maksimuman nombron da primaraj subdiskoj).\n"
+"Unue forigu primaran subdiskon kaj kreu etenditan subdiskon."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Creating auto install floppy..."
+msgid "Mount"
+msgstr "Muntu"
+
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Creating auto install floppy"
msgstr "Kreas aĆ­toinstalan disketon"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../steps.pm:1
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "EnƝovu malplenan disketon en drajvo %s"
+msgid "Install updates"
+msgstr "Instalu ĝisdatigojn"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
+msgid "text box height"
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Instalado de startƝargilo malsukcesis. La sekvanta eraro okazis:"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Installing bootloader"
-msgstr "Instalas start-Ɲargilon"
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "State"
+msgstr "Stato:"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Eraro daĆ­re mi instalis \"aboot\",\n"
-"Ĉu mi devus provi perforte instali eĉ se tio detruas la unuan subdiskon?"
+msgid "Be sure a media is present for the device %s"
+msgstr "Kontrolu ke medio estas en la aparato %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Do you want to use aboot?"
-msgstr "Ĉu vi deziras uzi aboot-on?"
+msgid "Enable multiple profiles"
+msgstr "Ebligu multoblajn profilojn"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+"These options can backup and restore all files in your /etc directory.\n"
msgstr ""
-"Ɯajne vi havas malnovegan aƭ nekonatan maƝinon,\n"
-"la yaboot-startilo ne funkcios por vi.\n"
-"La instalado daĆ­rigos, sed vi devos\n"
-"uzi BootX aƭ alian rimedon por startigi vian maƝinon"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Preparing bootloader..."
-msgstr "Preparas startƝargilon"
+msgid "Local printer"
+msgstr "Loka printilo"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Domain Admin Password"
+msgid "Files Restored..."
msgstr ""
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Domain Admin User Name"
-msgstr "Uzulnomo de la Domajna administranto"
+msgid "Package selection"
+msgstr "Elektado de PakaĔoj"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Windows Domain"
-msgstr "Vindozo Domajno"
+msgid "Mauritania"
+msgstr "MaĆ­rlando"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Authentication Windows Domain"
-msgstr "AĆ­tentikigado Vondoza Domajno"
+msgid ""
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
+"\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
+"\n"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "NIS Server"
-msgstr "NIS Servilo"
+msgid "All primary partitions are used"
+msgstr "Ĉiuj el la subdiskoj estas uzata"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "NIS Domain"
-msgstr "NIS Domajno"
+msgid ""
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Authentication NIS"
-msgstr "AĆ­tentikiga NIS"
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr "Auxtomata detektado kaj konfigurado de aparataro dum starto."
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS"
-msgstr "NIS"
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Installation Server Configuration"
+msgstr "LAN KonfiguraĔo"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "LDAP Server"
-msgstr "LDAP Servilo"
+msgid "Configuring IDE"
+msgstr "Konfiguras IDE"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "LDAP Base dn"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Network functionality not configured"
+msgstr "Ekrano ne estas konfigurata"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Authentication LDAP"
-msgstr "AĆ­tentikiga LDAP"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Configure module"
+msgstr "Konfiguru muson"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LDAP"
-msgstr "LDAP"
+msgid "Cocos (Keeling) Islands"
+msgstr "Kokos-Insuloj (Keeling)"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Local files"
-msgstr "Lokaj dosieroj"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnecting from the Internet "
+msgstr "Konektu al la Interreto"
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Authentication"
-msgstr "AĆ­tentikigado"
+msgid "You'll need to reboot before the modification can take place"
+msgstr "Vi bezonos restarti antaƭ ol la Ɲanĝo povas efektiviĝi"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr ""
-"Ĉi tiu pasvorto ests tro simpla (ĝi devas esti almenaƭ %d signoj longa)"
+msgid "Provider phone number"
+msgstr "Telefonnumero de interretprovizanto"
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "No password"
-msgstr "Neniu pasvorto"
+msgid "Host %s"
+msgstr "Gastiganto %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Set root password"
-msgstr "Difinu pasvorton de root"
+msgid "Armenia"
+msgstr "Armenio"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr "Vi ne konfiguris X-on. Ĉu vi certas vere voli tion?"
+msgid "Fiji"
+msgstr "Fiĝio"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Services: %d activated for %d registered"
+msgid ""
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Services"
-msgstr "Servoj"
+msgid "Second floppy drive"
+msgstr "Dua disketa drajvo"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "System"
-msgstr "Sistemo"
+msgid "About Harddrake"
+msgstr ""
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "%s on %s"
-msgstr "%s sur %s"
+msgid "Drive capacity"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Bootloader"
-msgstr "StartƝargilo"
+msgid ""
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
+msgstr ""
+"EnƝovu disketon en drajvo\n"
+"Ĉiuj datenoj sur tiu disketo estos perdata"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot"
-msgstr "Starto"
+msgid "Size: %s"
+msgstr "Grandeco: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "disabled"
-msgstr "malebligita"
+msgid "Control and Shift keys simultaneously"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "activated"
-msgstr "aktiva"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "secondary"
+msgstr "%d sekundoj"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "View Backup Configuration."
+msgstr "Reta KonfiguraĔo"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "Firewall"
+msgid "if set to yes, report check result to syslog."
msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Security"
-msgstr "Sekureco"
+msgid "No password"
+msgstr "Neniu pasvorto"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Security Level"
-msgstr "sekurnivelo"
+msgid "Nigeria"
+msgstr "Niĝerio"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Network"
-msgstr "Reto"
+msgid "There is no existing partition to use"
+msgstr "Ne ekzistas subdiskojn por uzi"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Network & Internet"
-msgstr "Reto kaj Interreto"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
+msgstr "Via komputilo ne havas retadaptilon!"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Graphical interface"
-msgstr "Grafika interfaco"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
+msgstr ""
+"Por printi al inga printilo, vi bezonas provizi la\n"
+"poƝtejon de la printilo kaj opcie la pordnumeron."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Hardware"
-msgstr "Aparataro"
+msgid "Hard drive information"
+msgstr "Informoj pri fiksdisko(j)"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "TV card"
-msgstr "TV-karto"
+msgid "Russian"
+msgstr "Rusa"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "Ne detektis sonkarto. Provu \"harddrake\" post instalado"
+msgid "Jordan"
+msgstr "Jordanio"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr "Rulu \"sndconfig\" post instalado por konfiguri vian sonkarton"
+msgid "Hide files"
+msgstr "KaƝu dosierojn"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "Ĉu vi havas ISA-sonkarton?"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Auto-detect printers connected to this machine"
+msgstr "Malproksima printilo"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Sound card"
-msgstr "Sonkarto"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Remote CUPS server"
-msgstr "Malproksima CUPS-a servilo"
+msgid "Sorry, no floppy drive available"
+msgstr "BedaĆ­rinde, neniu disketdrajvo havebla"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No printer"
-msgstr "Neniu printilo"
+msgid "Bolivia"
+msgstr "Bolivio"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer"
-msgstr "Printilo"
-
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#, c-format
-msgid "Mouse"
-msgstr "Muso"
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Timezone"
-msgstr "Horzono"
+msgid "Bad package"
+msgstr "Malbona pakaĔo"
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Keyboard"
-msgstr "Klavaro"
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
-#, c-format
-msgid "Summary"
-msgstr "Resumo"
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid "DrakSec Basic Options"
+msgstr "Opcioj"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "NTP Server"
-msgstr "NTP Servilo"
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program. Just type \"sndconfig\" in a console."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Auxtomata hor-sinkronizado (uzante NTP) "
+msgid "Romania"
+msgstr "Rumanujo"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Aparata horloĝo estas ĝustigita laƭ GMT"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "choose device"
+msgstr "Starta aparato"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which is your timezone?"
-msgstr "kio estas vian horzonon?"
+msgid "Canada"
+msgstr "Kanado"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Would you like to try again?"
-msgstr "Ĉu vi Ɲatus reprovi?"
+msgid "Remove from LVM"
+msgstr "Forigu de LVM (Redundanca Aro de Malmultekostaj Diskoj)"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Ne povis kontakti spegulon %s"
+msgid "Timezone"
+msgstr "Horzono"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Kontaktu la spegulon por havigi la liston de havebla pakaĔoj"
+msgid "German"
+msgstr "Germana"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Elektu spegulon de kiu havigi la pakaĔojn"
+msgid "Next ->"
+msgstr "Sekvanta ->"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
msgstr ""
-"Mi kontaktas la Linuks-Mandrakan retpaĝon por havigi la liston de "
-"disponeblaj speguloj..."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
"\n"
-"Do you want to install the updates ?"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
msgstr ""
-"Vi havas nun la eblecon deƝuti ĝisdatigitajn pakaÄ”ojn. Tiuj pakaÄ”oj\n"
-"estas ĝisdatigitaj post eldonado de tiu ĉi eldono. Ili povas\n"
-"enteni sekureco- aĆ­ eraro-riparojn.\n"
"\n"
-"Por deƝuti tiujn pakaÄ”ojn, vi bezonas funkciantan Interret-\n"
-"konekton.\n"
-"\n"
-"Ĉu vi deziras instali tiujn ĝisdatigojn?"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr ""
-"EnƝovu la disketon kun ĝisdatigaj moduloj (Update Modules) en drajvo %s"
+"Povas esti, ke tiu ĉi subdisko estas\n"
+"pelila subdisko. Prefere\n"
+"lasu ĝin sola.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "EnƝovu la uzitan startigan disketon en drajvo %s"
+msgid "Guinea-Bissau"
+msgstr "Gvineo-BisaĆ­o"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Post-install configuration"
-msgstr "Post-instala konfigurado"
+msgid "Horizontal refresh rate"
+msgstr "Horizontala sinkronrapido (horizontal sync rate)"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Installing package %s\n"
-"%d%%"
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
msgstr ""
-"Instalas pakaĔo %s\n"
-"%d%%"
+"Ne povas malfiksi surmetingon ĉar ĉi tiu subdisko estas uzata por\n"
+"retrokonektado. Unue forigu la retrokonektadon."
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Preparing installation"
-msgstr "Preparas instaladon"
+msgid ""
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "KDROM etikedata \"%s\""
+msgid "USB controllers"
+msgstr "USB-kontroliloj"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Se vi havas ĉiujn de la KDROM-oj en la listo sube, klaku \"Jes\".\n"
-"Se vi havas neniujn de ĉi tiuj KDROM-oj, klaku \"Nuligu\".\n"
-"Se vi mankas nur iujn de la KDROM-oj, malelektu ilin, kaj poste klaku \"Jes"
-"\"."
+msgid "What norm is your TV using?"
+msgstr "Kiun normon uzas via TV?"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "All"
-msgstr "Ĉiuj"
+msgid "Type:"
+msgstr "Speco:"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Vere minimuma instalado (precipe ne urpmi)"
+msgid "Share name"
+msgstr "Opuza nomo"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Kun baza dokumentaĔo (rekomendita!)"
+msgid "enable"
+msgstr "ebligu"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "With X"
-msgstr "Kun X"
+msgid ""
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
+msgstr ""
+"Mi kontaktas la Linuks-Mandrakan retpaĝon por havigi la liston de "
+"disponeblaj speguloj..."
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
msgstr ""
-"Vi ne elektis pakaĔgrupon.\n"
-"Bonvole elektu la minimuman instaladon kiun vi deziras:"
+"Problemo okazis dum restarto de la reto: \n"
+"\n"
+"%s"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Type of install"
-msgstr "Instaltipo"
+msgid "Remove the loopback file?"
+msgstr "Ĉu forigu la retrokonektan dosieron?"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Selected size is larger than available space"
msgstr "Elektita grandeco estas pli ampleksa ol disponebla spaco"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "EnƝovu disketon kun pakaÄ”-selekto en drajvo"
+msgid "NCP server name missing!"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Loading from floppy"
-msgstr "Ɯargas de disketo"
+msgid "Please choose your country."
+msgstr "Bonvole elektu vian landon."
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Package selection"
-msgstr "Elektado de PakaĔoj"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Hard Disk Backup files..."
+msgstr "Malbona rezerva dosiero"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Save on floppy"
-msgstr "Konservu sur disketo"
+msgid "Laotian"
+msgstr "Laosa"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Load from floppy"
-msgstr "Ɯargu de disketo"
+msgid "Samoa"
+msgstr "Samoo"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
msgstr ""
-"Bonvole elektu Ɲargu aĆ­ konservu pakaÄ”-elekton sur disketo.\n"
-"La formato estas la sama kiel disketoj generitaj per auto_install."
+"La rstat protokolo permesas al uzuloj sur reto ekstrakti metrikojn\n"
+"pri la rapideco de iu ajn komputilo sur tiu reto."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+msgid "Re-generating list of configured scanners ..."
msgstr ""
-"Via komputilo ne havas sufiĉe da spaco por instalado aƭ promocio (%d > %d)."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Looking for available packages..."
-msgstr "Serĉas haveblajn pakaÄ”ojn"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Trovadas pakaĔojn por promocii"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Looking at packages already installed..."
-msgstr "Rigardante jam instalitajn pakaĔojn..."
-
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "Serĉas haveblajn pakaÄ”ojn kaj refaras la rpm-datenbazon..."
+msgid "Scanner"
+msgstr "skanilo"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "Nesufiĉa interƝanĝospaco por plenumi instalado, bonvolu aldoni iom"
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr "Averto: provado de ĉi tiu grafika-karto eble svenigos vian komputilon"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
-msgstr ""
-"Mi malsukcesis kontroli la dosiersistemon %s. Ĉu vi deziras ripari la "
-"erarojn? (atentu, vi povas perdi datenojn)"
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr "Salutnomo devas enhavi nur minusklojn, ciferojn, `-' kaj `_'"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Check bad blocks?"
-msgstr "Ĉu kontrolas malbonajn blokojn?"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Menudrake"
+msgstr "Spertulo"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Elektu la subdiskoj kiuj vi deziras formati"
+msgid "Welcome To Crackers"
+msgstr "Bonvenon Al Rompistoj"
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Vi bezonas restarti por la Ɲanĝoj al la subdisktabelo efektivigi"
+msgid "Module options:"
+msgstr "Modulaj opcioj:"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+msgid "Secure your networks with the Multi Network Firewall"
msgstr ""
-"Ne libera spaco por 1mb-startparto! La instalado daurigos, sed por startigi "
-"vian sistemon, vi devos krei la startpartan subdiskon en DiskDrake"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Choose the mount points"
-msgstr "Elektu surmetingojn"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Leganta subdiskojn por trovi kroĉpunktojn"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Go on without configuring the network"
+msgstr "Konfiguras reto"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "No partition available"
-msgstr "neniuj haveblaj subdiskoj"
+msgid "Abort"
+msgstr "Ĉesigu"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configuring IDE"
-msgstr "Konfiguras IDE"
+msgid "No password prompt on %s at port %s"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "IDE"
-msgstr "IDE"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "Bonvole, elektu la pakaĔojn kiujn vi deziras instali."
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "Konfiguras PCMCIA kartojn..."
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Usage of remote scanners"
+msgstr "Uzu liberan spacon"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid "\t-CDROM.\n"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Button 3 Emulation"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
msgstr ""
+"Via Vindoza subdisko estas tro fragmentigata, bonvole uzu ``defrag'' antaĆ­e"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Button 2 Emulation"
-msgstr ""
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak-a (Norvega)"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Buttons emulation"
+msgid "Hard Disk Backup Progress..."
msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Bonvole, elektu al kiu seria pordo estas via muso konektata."
+msgid "Unable to fork: %s"
+msgstr "Ne povis forki: %s"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mouse Port"
-msgstr "Muspordo"
+msgid "Type: "
+msgstr "Speco: "
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Please choose your type of mouse."
-msgstr "Bonvole elektu la specon de via muso."
+msgid "<-- Edit Client"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Encryption key for %s"
-msgstr "La pasvortoj ne egalas"
+msgid "no fonts found"
+msgstr "neniu retkarto trovita"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Upgrade %s"
-msgstr "Ĝisdatigu %s"
+msgid "Mouse"
+msgstr "Muso"
-#: ../../install_steps_interactive.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Ĉu tiu ĉi estas instalado aƭ ĝisdatigo?"
+msgid "not enough room in /boot"
+msgstr "mankas sufiĉe da spaco en /boot"
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Install/Upgrade"
-msgstr "Instalado/Ĝisdatigo"
+msgid "Choosing an arbitratry driver"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "Jen la kompleta listo de haveblaj klavaroj"
+msgid "Host name"
+msgstr "PoƝtejo"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Bonvole elektu vian klavar-aranĝon."
+msgid "Liechtenstein"
+msgstr "LiÄ„tenƝtejno"
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Quit"
-msgstr "Ĉesu"
+msgid "the color of the progress bar"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "License agreement"
-msgstr "Licenca kontrakto"
+msgid "Suppress Fonts Files"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "An error occurred"
-msgstr "Eraro okazis"
+msgid "Add to RAID"
+msgstr "Aldonu al RAID (Redundanca Aro de Malmultekostaj Diskoj)"
-#: ../../install_steps_newt.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
-msgstr " <Tabo>/<Alt-Tabo> inter eroj | <Spaco> elektas | <F12> sekva ekrano "
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
-#: ../../install_steps_newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Linuks-Mandrejka Instalado %s"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr ""
-#: ../../install_steps.pm:1
-#, c-format
-msgid "No floppy drive available"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "No floppy drive available!"
msgstr "Neniu disketilo havebla"
-#: ../../install_steps.pm:1
-#, c-format
-msgid "Welcome to %s"
-msgstr "Bonvenon al %s"
-
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
msgstr ""
-"Iuj gravaj pakaĔoj ne estis taƭge instalata.\n"
-"AĆ­ via KDROM drajvo aĆ­ via KDROM disko estas difektita.\n"
-"Kontrolu la KDROM sur instalata komputilo per\n"
-"\"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-#: ../../install_steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duobla surmetingo %s"
+msgid "Continue anyway?"
+msgstr "Ĉu mi devus daƭri malgraƭe?"
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
msgstr ""
-"Eraro okazis, sed mi ne scias kiel trakti ĝin bone.\n"
-"DaĆ­ri je via propra risko."
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please wait"
-msgstr "Bonvole atendu"
+msgid "Printer"
+msgstr "Printilo"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ok"
-msgstr "Jeso"
+msgid "Saudi Arabia"
+msgstr "SaĆ­da Arabujo"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Finish"
-msgstr "Finu"
+msgid "Internet"
+msgstr "Interreto"
-#: ../../interactive.pm:1 ../../standalone/draksec:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Basic"
-msgstr "Baza"
+msgid "Some devices were added:\n"
+msgstr ""
-#: ../../interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Advanced"
-msgstr "Progresinta"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "Geometrio: %s cilindroj, %s kapoj, %s sektoroj\n"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove"
-msgstr "Forigu"
+msgid "Printing on the printer \"%s\""
+msgstr "Presanta per presilo \"%s\""
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Modify"
-msgstr "Ɯanĝu"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr ""
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
-#, c-format
-msgid "Add"
-msgstr "Aldonu"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore From Tape"
+msgstr "Sava subdiskotabelo"
-#: ../../interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Choose a file"
-msgstr "Elektu dosieron"
+msgid "Choose the profile to configure"
+msgstr "Elektu la konfigurendan profilon"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
msgstr ""
-"Ĉi tie vi povas elekti la klavon aƭ klavkombinon kiu\n"
-"ebligos al vi Ɲalti inter la diversaj klavaroj\n"
-"(ekz-e latinaj kaj ne-latinaj)"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "Dekstra \"Vindozo\"-klavo"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup Now from configuration file"
+msgstr "Reta KonfiguraĔo"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Left \"Windows\" key"
-msgstr "Maldekstra \"Vindozo\"-klavo"
+msgid "Mount points should contain only alphanumerical characters"
+msgstr "Surmetingoj devas enteni nur alfanumerajn signojn"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "\"Menu\" key"
-msgstr "\"Menuo\"-klavo"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Restarting printing system..."
+msgstr "Kiun printsistemo vi deziras uzi?"
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Alt and Shift keys simultaneously"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
+msgid "See hardware info"
+msgstr "Vidu hardvaran informon"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "CapsLock key"
-msgstr ""
+msgid "First sector of boot partition"
+msgstr "Unua sektoro de starta subdisko"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Control and Shift keys simultaneously"
+msgid "Printer manufacturer, model"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Both Shift keys simultaneously"
+msgid "PDQ - Print, Don't Queue"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Right Alt key"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
msgstr ""
+"[OPCIOJ]...\n"
+"Konfigurilo de Mandrak-Terminal-Servilo\n"
+"--enable : ebligu MTS\n"
+"--disable : malebligu MTS\n"
+"--start : startigu MTS\n"
+"--stop : haltigu MTS\n"
+"--adduser : aldonu ekzistantan sistem-uzulon al MTS (postulas "
+"uzulnomon)\n"
+"--deluser : forigu ekzistantan sistem-uzulon de MTS (postulas "
+"uzulnomon)\n"
+"--addclient : aldonu kliento-maƝinon al MTS (postulas MAC-adreson, IP, "
+"nbi image-nomon)\n"
+"--delclient : forigu kliento-maƝinon de MTS (postulas MAC-adreson, IP, "
+"nbi image nomon)"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslava (latina)"
-
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vjetnama \"numero-vica\" QWERTY-a"
+msgid "Subnet Mask:"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "US keyboard (international)"
-msgstr "Usona klavaro (internacia)"
+msgid "LiLo and Bootsplash themes installation successfull"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "US keyboard"
-msgstr "Usona klavaro"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"La du gravegaj parametroj estas la vertikala refreƝigrapido (vertical\n"
+"refresh rate) kiu estas la rapido por refreƝigi la tutan ekranon, kaj\n"
+"plej grave la horizontala sinkronrapido (horizontal sync rate), kiu estas\n"
+"la rapido por montri skanliniojn.\n"
+"\n"
+"Ĝi estas TRE GRAVA ke vi ne elektas specon de ekrano kiu havas\n"
+"sinkronamplekson kiu estas preter la kapabloj de via ekrano: vi eble\n"
+"difektus vian ekranon. Se vi dubas, elektu zorgeman opcion."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "UK keyboard"
-msgstr "Unuiĝinta Regna klavaro"
+msgid "Modify"
+msgstr "Ɯanĝu"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ukrainian"
-msgstr "Ukrajna"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turka (moderna \"Q\" modelo)"
+msgid "Need hostname, username and password!"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turka (tradicia \"F\" modelo)"
-
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Tajik keyboard"
-msgstr "Taja klavaro"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
+"WebDAV estas protokolo kiu ebligas al vi kroĉi interretservilan dosierujon\n"
+"loke, kaj trakti ĝin kvazaƭ lokan dosiersistemon (kondiĉe ke la retservilo "
+"estu\n"
+"konfigurita kiel WebDAV-servilo). Se vi deziras aldoni WebDAF-kroĉpunktojn,\n"
+"elektu \"New\"."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Thai keyboard"
-msgstr "Taja klavaro"
+msgid "HardDrake"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "Tamila (skribmaƝina)"
+msgid "new"
+msgstr "nova"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr "Tamila (ISCII)"
+msgid "Would you like to try again?"
+msgstr "Ĉu vi Ɲatus reprovi?"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Serbian (cyrillic)"
-msgstr "Serba (cirila)"
+msgid "Wizard"
+msgstr "Sorĉisto"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Slovaka (QWERTY)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Edit selected server"
+msgstr "Malinstalu printvicon"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovaka (QWERTZ)"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please choose where you want to backup"
+msgstr "Bonvole, elektu la pakaĔojn kiujn vi deziras instali."
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Slovenian"
-msgstr "Slovena"
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr "Vi bezonas restarti por la Ɲanĝoj al la subdisktabelo efektivigi"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Swedish"
-msgstr "Sveda"
+msgid "Do not include the browser cache"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Russian (Yawerty)"
-msgstr "Rusa (Yawerty-a)"
+msgid "Please, choose your keyboard layout."
+msgstr "Bonvole, elektu vian klavaran aranĝon."
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
-msgid "Russian"
-msgstr "Rusa"
+msgid "Standard"
+msgstr "LaĆ­norma"
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Romanian (qwerty)"
-msgstr "Rumana (qwerty-a)"
+msgid "Please choose your mouse type."
+msgstr "Bonvole, elektu la specon de via muso."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Romanian (qwertz)"
-msgstr "Rumana (qwertz-a)"
+msgid "Connect..."
+msgstr "Konektu..."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Canadian (Quebec)"
-msgstr "Kanada (Kebeka)"
+msgid "Failed to configure printer \"%s\"!"
+msgstr "Malsukcesis konfiguri la printilon \"%s\"!"
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Portuguese"
-msgstr "Portugala"
+msgid "not configured"
+msgstr "ne konfigurita"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Pola (qwertz aranĝo)"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Pola (qwerty aranĝo)"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "About"
+msgstr "Ĉesigu"
-#: ../../keyboard.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Norwegian"
-msgstr "Norvega"
+msgid "Proxies configuration"
+msgstr "Konfigurado de prokuraj serviloj"
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Dutch"
-msgstr "Nederlanda"
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Maltese (US)"
-msgstr "Malta (US)"
+msgid "Start: sector %s\n"
+msgstr "Komenco: sektoro %s\n"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Maltese (UK)"
-msgstr "Malta (UK)"
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Network interface already configured"
+msgstr "Ekrano ne estas konfigurata"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Mongola (cirila)"
+msgid "Couldn't access the floppy!"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Myanmar (Burmese)"
-msgstr "Mianmara (burma)"
+msgid "connecting to Bugzilla wizard ..."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Macedonian"
-msgstr "Macedona"
+msgid "Mail Server"
+msgstr "RetpoƝt-servilo"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Malayalam"
-msgstr "Malajalama"
+msgid "Please click on a partition"
+msgstr "Bonvolu klaki sur subdiskon"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Latvian"
-msgstr "Latva"
+msgid "Linux"
+msgstr "Linukso"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litova \"fonetika\" QWERTY-a"
+msgid "Have a nice day!"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litova \"numero-vica\" QWERTY-a"
+msgid "across Network"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litova AZERTY-a (nova)"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litova AZERTY-a (malnova)"
+msgid "Upgrade %s"
+msgstr "Ĝisdatigu %s"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Laotian"
-msgstr "Laosa"
+msgid "Select Printer Connection"
+msgstr "Elektu Printilan Konekton"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Latin American"
-msgstr "Latinamerika"
+msgid "Scanning for TV channels in progress ..."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Korean keyboard"
-msgstr "Korea klavaro"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Japanese 106 keys"
-msgstr "Japana 106 klavoj"
+msgid "IP Range Start:"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Inuktitut"
-msgstr "inuita"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"La interreta superservila demono (kutime nomata inetd) lanĉas sortimenton\n"
+"da aliaj interretaj servoj laƭbezone. Ĝi respondas por la lanĉo de multaj\n"
+"servoj, inkluzive de telnet, ftp, rsh, kaj rlogin. Se vi malƝaltas inetd,\n"
+"ve malƝaltas ĉiujn el la servoj por kiuj ĝi respondas."
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Italian"
-msgstr "Itala"
+msgid "the height of the progress bar"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Icelandic"
-msgstr "Islanda"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Iranian"
-msgstr "Irana"
+msgid "Argentina"
+msgstr "Argentino"
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "Israela (fonetika)"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Israeli"
-msgstr "Israela"
+msgid "Domain Name Server"
+msgstr "Domajn-nom-servilo"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Croatian"
-msgstr "Kroata"
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Security Level:"
+msgstr "Elektas sekurnivelon"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Hungarian"
-msgstr "Hungara"
+msgid "Mount points must begin with a leading /"
+msgstr "Surmetingoj devas komenci kun antaĆ­a /"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Gurmukhi"
-msgstr "gumurka"
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Postfix Mail Server"
+msgstr "Datumbazoj"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Gujarati"
-msgstr "gujarata"
+msgid "Quit without saving"
+msgstr "Ĉu eliru sen konservi"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Greek"
-msgstr "Greka"
+msgid "Yemen"
+msgstr "Jemeno"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Kartvela (\"Latina\" aranĝo)"
+msgid "This product is available on the MandrakeStore Web site."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Kartvela (\"Rusa\" aranĝo)"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "French"
-msgstr "Franca"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Finnish"
-msgstr "Finna"
+msgid "Hard drive detection"
+msgstr "Detektado de fiksdisko(j)"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Spanish"
-msgstr "Hispana"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
+"Vi ne elektis pakaĔgrupon.\n"
+"Bonvole elektu la minimuman instaladon kiun vi deziras:"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Estonian"
-msgstr "Estona"
+msgid "Please enter the WebDAV server URL"
+msgstr "Bonvole entajpu la servilan URL de la WebDAV"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak-a (Sveda)"
+msgid "Tajikistan"
+msgstr "Taĝikistano"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak-a (Norvega)"
+msgid "Accept"
+msgstr "Akceptu"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak-a (US)"
+msgid "Description"
+msgstr "Priskribo"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Danish"
-msgstr "Dana"
+msgid "Error opening %s for writing: %s"
+msgstr "Eraro dum malfermado de %s por skribi: %s"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Devanagari"
-msgstr "devanagara"
+msgid "Mouse type: %s\n"
+msgstr "Speco de muso: %s\n"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "German (no dead keys)"
-msgstr "Germana (neniom da mortaj klavoj)"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr "Vi povas havi 3D aparatan akceladan subtenon kun XFree %s."
-#: ../../keyboard.pm:1
-#, c-format
-msgid "German"
-msgstr "Germana"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "Bonvole, elektu vian klavaran aranĝon."
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Czech (QWERTY)"
-msgstr "ĈeĄa (QWERTY)"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Czech (QWERTZ)"
-msgstr "ĈeĄa (QWERTZ)"
+msgid "Expert Area"
+msgstr "Spertulejo"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Swiss (French layout)"
-msgstr "Svisa (franca aranĝo)"
+msgid "Choose a monitor"
+msgstr "Elektu ekranon"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Swiss (German layout)"
-msgstr "Svisa (germana aranĝo)"
+msgid "Empty label not allowed"
+msgstr "Malplena etikedo ne estas permesata"
#: ../../keyboard.pm:1
#, c-format
-msgid "Belarusian"
-msgstr "Belarusa"
+msgid "Maltese (UK)"
+msgstr "Malta (UK)"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Bosnian"
-msgstr "Bosna"
+msgid "I can't add any more partition"
+msgstr "Mi ne povas aldoni plu da subdiskoj"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazila (ABNT-2)"
+msgid "Size in MB: "
+msgstr "Grandeco en MB: "
-#: ../../keyboard.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Bulgarian (BDS)"
-msgstr "Bulgara (BDS)"
+msgid "Remote printer"
+msgstr "Malproksima printilo"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "Bulgara (fonetika)"
+msgid "Please choose a language to use."
+msgstr "Bonvole elektu lingvon por uzi."
-#: ../../keyboard.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Bengali"
-msgstr "bengala"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
+"AVERTO: Ĉi tiu aparato estis antaƭe konfigurita por konekti al la "
+"Interreto.\n"
+"Simple akceptu konservi la konfiguron de ĉi tiu aparato.\n"
+"Se vi modifos la subajn kampojn, vi Ɲanĝos ĉi tiun konfiguron."
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Belgian"
-msgstr "Belga"
+msgid "I can set up your computer to automatically log on one user."
+msgstr "Mi povas konfiguri vian komputilon por aĆ­tomate enirigi unu uzulon"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbajĝana (latina)"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Floppy format"
+msgstr "Formatu"
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Arabic"
-msgstr "araba"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
+msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Armenian (phonetic)"
-msgstr "Armena (fonetika)"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Generic Printers"
+msgstr "Printilo"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Armenian (typewriter)"
-msgstr "Armena (skribmaƝina)"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Armenian (old)"
-msgstr "Armena (malnova)"
+msgid "The scanners on this machine are available to other computers"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Albanian"
-msgstr "Albana"
+msgid "First sector of the root partition"
+msgstr "Unua sektoro de radika subdisko"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Polish"
-msgstr "Pola"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Alternative drivers"
+msgstr "Printas provpaĝo(j)n..."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Dvorak"
-msgstr "Dvorak-a"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Zimbabwe"
-msgstr "Zimbabvo"
+msgid "Initrd"
+msgstr "Initrd"
#: ../../lang.pm:1
#, c-format
-msgid "Zambia"
-msgstr "Zambio"
+msgid "Cape Verde"
+msgstr "Kabo-Verdo"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "South Africa"
-msgstr "Sud-Afriko"
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Serbia"
-msgstr "serba"
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Mayotte"
-msgstr "majota"
+msgid "Guam"
+msgstr "Gvamo"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Yemen"
-msgstr "Jemeno"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Samoa"
-msgstr "Samoo"
+msgid "/Options/Test"
+msgstr "/Opcioj/Provu"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Wallis and Futuna"
-msgstr "valis-kaj-futuna"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+"vi devus uzi ĉi tiun nivelon zorge. Ĝi faras vian komputilon pli facila\n"
+"por uzi, sed delikatega: vi devus neniam uzi ĝi surrete.\n"
+"Ĝi ne havas pasvortojn."
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Vanuatu"
-msgstr "Vanuatuo"
+msgid "Mounting partition %s"
+msgstr "Enkroĉas subdiskon %s"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Vietnam"
-msgstr "Vjetnamio"
+msgid "User name"
+msgstr "Salutnomo"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Insuloj Virgaj (Usonaj)"
+msgid "New configuration (isdn-light)"
+msgstr "Nova konfiguraĔo (isdn-light)"
-#: ../../lang.pm:1
-#, c-format
-msgid "Virgin Islands (British)"
-msgstr "Insuloj Virgaj (Britaj)"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Userdrake"
+msgstr "Printilo"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Venezuela"
-msgstr "Venezuelo"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "Kiun subdiskon vi deziras uzi por Linux4Win?"
-#: ../../lang.pm:1
-#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "Sent-Vincento kaj la Grenadinoj"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup system"
+msgstr "Dosiersistemo konfiguro"
-#: ../../lang.pm:1
-#, c-format
-msgid "Vatican"
-msgstr "Vatikano"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Test pages"
+msgstr "Provu pordojn"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Uzbekistan"
-msgstr "Uzbekistano"
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Uruguay"
-msgstr "Urugvajo"
+msgid "Checking %s"
+msgstr "Kontrolanta %s"
-#: ../../lang.pm:1
-#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "usonaj malgrandaj eksteraj insuloj"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "TCP/Socket Printer Options"
+msgstr "Ing-Printilaj Opcioj"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Uganda"
-msgstr "Ugando"
+msgid "Card mem (DMA)"
+msgstr "Memoro de Karto (DMA)"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Ukraine"
-msgstr "Ukrajno"
+msgid "France"
+msgstr "Francio"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Tanzania"
+msgid "browse"
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Taiwan"
-msgstr "Tajvano"
+msgid "Checking installed software..."
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Tuvalu"
-msgstr "Tuvalo"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remote printer name missing!"
+msgstr "Malproksima poƝtejo"
-#: ../../lang.pm:1
-#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Trinidado kaj Tobago"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "Ĉu vi deziras provi printado?"
#: ../../lang.pm:1
#, c-format
msgid "Turkey"
msgstr "Turkujo"
-#: ../../lang.pm:1
-#, c-format
-msgid "Tonga"
-msgstr "Tongo"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Tunisia"
-msgstr "Tunizio"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Turkmenistan"
-msgstr "Turkmenistano"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "East Timor"
-msgstr "Orienta Timoro"
-
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Tokelau"
+msgid "Alcatel speedtouch usb"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Tajikistan"
-msgstr "Taĝikistano"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Thailand"
-msgstr "Tajlando"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Togo"
-msgstr "Togo"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Number of buttons"
+msgstr "2 butonoj"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "French Southern Territories"
-msgstr "francaj sudaj teritorioj"
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Vjetnama \"numero-vica\" QWERTY-a"
-#: ../../lang.pm:1
-#, c-format
-msgid "Chad"
-msgstr "Ĉado"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Module"
+msgstr "Muso"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Turks and Caicos Islands"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Swaziland"
-msgstr "Svazilando"
+msgid "Hardware"
+msgstr "Aparataro"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Syria"
-msgstr "Sirio"
+msgid "Ctrl and Alt keys simultaneously"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "El Salvador"
-msgstr "Salvadoro"
+msgid "United States"
+msgstr "Usono"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Sao Tome and Principe"
-msgstr "Sao-Tomeo kaj Principeo"
+msgid "Default OS?"
+msgstr "DefaĆ­lta Mastruma Sistemo?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Suriname"
-msgstr "Surinamo"
+msgid "Swiss (German layout)"
+msgstr "Svisa (germana aranĝo)"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Somalia"
-msgstr "Somalujo"
+msgid "Configure all heads independently"
+msgstr "Konfiguru ĉiujn kapojn sendepende"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Senegal"
-msgstr "Senegalio"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "San Marino"
-msgstr "San-Marino"
+msgid "NTP Server"
+msgstr "NTP Servilo"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Sierra Leone"
-msgstr "Siera-Leono"
+msgid "Load/Save on floppy"
+msgstr "Ɯargu/Konservu sur disketo"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Slovakia"
-msgstr "Slovakujo"
+msgid "This theme does not yet have a bootsplash in %s !"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Spicbergo kaj Jan-Majen-Insuloj"
+msgid "nice"
+msgstr "agrabla(j)"
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Slovenia"
-msgstr "Slovenujo"
+msgid "Leaving in %d seconds"
+msgstr "Eliras post %d sekundoj"
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Saint Helena"
-msgstr "Sankt-Heleno"
+msgid "Please choose which serial port your modem is connected to."
+msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Singapore"
-msgstr "Singapuro"
+msgid "Country"
+msgstr "Lando"
-#: ../../lang.pm:1
-#, c-format
-msgid "Sudan"
-msgstr "Sudano"
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Property"
+msgstr "Pordo"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Seychelles"
-msgstr "SejƝeloj"
+msgid "Ghostscript"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Solomon Islands"
-msgstr "Salomon-Insuloj"
+msgid "LAN Configuration"
+msgstr "LAN KonfiguraĔo"
#: ../../lang.pm:1
#, c-format
-msgid "Saudi Arabia"
-msgstr "SaĆ­da Arabujo"
+msgid "Ghana"
+msgstr "Ganao"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Rwanda"
-msgstr "Ruando"
+msgid "Path or Module required"
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Russia"
-msgstr "Rusio"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Advanced Options"
+msgstr "LAN KonfiguraĔo"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Romania"
-msgstr "Rumanujo"
+msgid "Coma bug"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Reunion"
-msgstr "Reunio"
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Qatar"
-msgstr "Kataro"
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Palau"
-msgstr "PalaĆ­o"
+msgid "There was an error installing packages:"
+msgstr "Estis eraro dum instalado de pakaĔoj:"
-#: ../../lang.pm:1
-#, c-format
-msgid "Paraguay"
-msgstr "Paragvajo"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Lexmark inkjet configuration"
+msgstr "Interreta Konfigurado"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Portugal"
-msgstr "Portugalujo"
+msgid "Undo"
+msgstr "Malfaru"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Palestine"
-msgstr "Palestino"
+msgid "Save partition table"
+msgstr "Konservu la subdiskotabelon"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Puerto Rico"
-msgstr "Porto-Riko"
+msgid "Finnish"
+msgstr "Finna"
#: ../../lang.pm:1
#, c-format
-msgid "Pitcairn"
-msgstr "Pitkarna Insulo"
+msgid "Macedonia"
+msgstr "Macedonio"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "Sanpetro-kaj-Mikelono"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Poland"
-msgstr "Pollando"
+msgid "Slovenian"
+msgstr "Slovena"
#: ../../lang.pm:1
#, c-format
-msgid "Pakistan"
-msgstr "Pakistano"
+msgid "Libya"
+msgstr "Libio"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Philippines"
-msgstr "Filipinoj"
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr ""
+"Mi konfiguras komandodosierojn, instalas programojn, startas servilojn..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Papua New Guinea"
-msgstr "Papuo-Nov-Gvineo"
+msgid ""
+"\n"
+"- Burn to CD"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "French Polynesia"
-msgstr "Franca Polinezio"
+msgid "Table"
+msgstr "Tabelo"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Peru"
-msgstr "Peruo"
+msgid "I don't know how to format %s in type %s"
+msgstr "ne scias kiel formati %s kiel speco %s"
-#: ../../lang.pm:1
-#, c-format
-msgid "Panama"
-msgstr "Panamo"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model"
+msgstr "Muso"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Oman"
-msgstr "Omano"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "New Zealand"
-msgstr "Nov-Zelando"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Stop Server"
+msgstr "NIS Servilo"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Niue"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Nauru"
-msgstr "Nauro"
-
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Nepal"
-msgstr "Nepalo"
+msgid "Modem"
+msgstr "Modemo"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Nicaragua"
-msgstr "Nikaragvo"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Nigeria"
-msgstr "Niĝerio"
+msgid "Tuvalu"
+msgstr "Tuvalo"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "Norfolk Island"
-msgstr "Norfolkaj Insuloj"
+msgid "Use auto detection"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Niger"
-msgstr "Niĝero"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr ""
+"GPM aldonas subtenon por musoj al teksta-reĝimaj Linuksaj aplikoj ekzemple\n"
+"la 'Midnight Commander' (Meznokta Estro). Ankaƭ ĝi permesas uzi la muson\n"
+"por transpoƝigi ĉe la konzolo (Sen X Fenestroj)."
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "New Caledonia"
-msgstr "Nov-Kaledonio"
+msgid "Started on boot"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Namibia"
-msgstr "Namibio"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Mozambique"
-msgstr "Mozambiko"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Malaysia"
-msgstr "Malajzio"
+msgid "Automatically find available printers on remote machines"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mexico"
-msgstr "Meksikio"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Malawi"
-msgstr "Malavio"
+msgid "East Timor"
+msgstr "Orienta Timoro"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Maldives"
-msgstr "Maldivoj"
+msgid "Del profile..."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Mauritius"
-msgstr "MaĆ­ricio"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Malta"
-msgstr "Malto"
+msgid "Installing Foomatic..."
+msgstr "Instalanta Foomatic..."
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Montserrat"
-msgstr "Montserato"
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr ""
+"Bonvole adiaƭu kaj sekve uzu Kontrol-Alt-RetropaƝo (Ctrl-Alt-Backspace)."
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Mauritania"
-msgstr "MaĆ­rlando"
+msgid "detected"
+msgstr "detektita"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Martinique"
-msgstr "Martiniko"
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr ""
+"La reto devas esti restartigita.\n"
+"Ĉu vi deziras restartigi ĝin?"
-#: ../../lang.pm:1
-#, c-format
-msgid "Northern Mariana Islands"
-msgstr "Insuloj Marianaj Nordaj"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Package: "
+msgstr "Elektado de PakaĔoj"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Mongolia"
-msgstr "Mongolio"
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Myanmar"
-msgstr "Mianmaro"
+msgid "SECURITY WARNING!"
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Mali"
-msgstr "Malio"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "StarOffice"
+msgstr "Oficejo"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Macedonia"
-msgstr "Macedonio"
+msgid "No, I don't want autologin"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Marshall Islands"
-msgstr "Insuloj MarƝalaj"
+msgid "Windows Migration tool"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Madagascar"
-msgstr "Madagaskaro"
+msgid "All languages"
+msgstr "Ĉiuj lingvoj"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Moldova"
-msgstr "Moldovio"
+msgid "Removing %s"
+msgstr "Mi forigas %s"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Monaco"
-msgstr "Monako"
+msgid "Testing your connection..."
+msgstr "Testante vian konektaĔon..."
-#: ../../lang.pm:1
-#, c-format
-msgid "Morocco"
-msgstr "Maroko"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cache size"
+msgstr "grandeco de pecoj"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Libya"
-msgstr "Libio"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
+msgstr ""
+"Pasvortoj nun estas ebligataj, sed uzado kiel reta komputilo estas ankoraĆ­\n"
+"ne rekomendita."
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Latvia"
-msgstr "Latvio"
+msgid "Start sector: "
+msgstr "Komenca sektoro: "
#: ../../lang.pm:1
#, c-format
-msgid "Luxembourg"
-msgstr "Luksemburgo"
+msgid "Congo (Brazzaville)"
+msgstr "Kongo (Brazavilo)"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "Lithuania"
-msgstr "Litovio"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr "Ĉi tiu pakaÄ”o %s devas esti instalita. Ĉu vi deziras instali ĝin?"
#: ../../lang.pm:1
#, c-format
-msgid "Lesotho"
-msgstr "Lesoto"
+msgid "Seychelles"
+msgstr "SejƝeloj"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Liberia"
-msgstr "Liberio"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Sri Lanka"
-msgstr "Sri Lanko"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Bad password on %s"
+msgstr "Neniu pasvorto"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Liechtenstein"
-msgstr "LiÄ„tenƝtejno"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Saint Lucia"
-msgstr "Sent-Lucio"
+msgid "Zambia"
+msgstr "Zambio"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Lebanon"
-msgstr "Libano"
+msgid "Security Administrator (login or email)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Laos"
-msgstr "Laoso"
+msgid "Sorry, we support only 2.4 kernels."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Kazakhstan"
-msgstr "KazaĄstano"
+msgid "Romanian (qwerty)"
+msgstr "Rumana (qwerty-a)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Cayman Islands"
-msgstr "Kajmana Insularo"
+msgid "Under Devel ... please wait."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Kuwait"
-msgstr "Kuvajto"
+msgid "Czech Republic"
+msgstr "la ĈeĄa Respubliko"
#: ../../lang.pm:1
#, c-format
-msgid "Korea"
-msgstr "Koreio"
+msgid "Egypt"
+msgstr "Egipto"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Korea (North)"
-msgstr "Koreio (Norda)"
+msgid "Old configuration (isdn4net)"
+msgstr "Malnova konfigraĔo (isdn4net)"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "Sent-Kristofo kaj Neviso"
+msgid "Sound card"
+msgstr "Sonkarto"
-#: ../../lang.pm:1
-#, c-format
-msgid "Comoros"
-msgstr "Komoroj"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Import Fonts"
+msgstr "Formatu subdiskojn"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Kiribati"
-msgstr "Kiribato"
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+"Vi havas unu grandan MicroSoft-Vindozan subdiskon.\n"
+"Mi proponas ke vi unue regrandecigu tiun subdiskon\n"
+"(klaku sur ĝin, kaj poste klaku sur \"Regrandecigu\")"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Cambodia"
-msgstr "Kamboĝo"
+msgid "Suppress Temporary Files"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Kyrgyzstan"
-msgstr "Kirgizistano"
+msgid "Change partition type"
+msgstr "Ɯanĝu subdiskspecon"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Kenya"
-msgstr "Kenjo"
+msgid ""
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Japan"
-msgstr "Japanio"
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Network Options"
+msgstr "Modulaj opcioj:"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Jordan"
-msgstr "Jordanio"
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Jamaica"
-msgstr "Jamajko"
+msgid "Statistics"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Iceland"
-msgstr "Islando"
+msgid "(on %s)"
+msgstr "(sur %s)"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Iran"
-msgstr "Irano"
+msgid "MM Series"
+msgstr "MM Serio"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Iraq"
-msgstr "Irako"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "British Indian Ocean Territory"
+msgid "average"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "India"
-msgstr "Hindio"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "New printer name"
+msgstr "Neniu printilo"
#: ../../lang.pm:1
#, c-format
-msgid "Israel"
-msgstr "Israelo"
+msgid "Equatorial Guinea"
+msgstr "Ekvatora Gvineo"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Ireland"
-msgstr "Irlando"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Indonesia"
-msgstr "Indonezio"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Build Backup"
+msgstr "Malbona rezerva dosiero"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hungary"
-msgstr "Hungario"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Haiti"
-msgstr "Haitio"
+msgid "Currently, no alternative possibility is available"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Croatia"
-msgstr "Kroatio"
+msgid "Romanian (qwertz)"
+msgstr "Rumana (qwertz-a)"
-#: ../../lang.pm:1
-#, c-format
-msgid "Honduras"
-msgstr "Honduro"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Write Config"
+msgstr "rekonfiguru"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Heard- kaj McDonald-Insuloj"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+"La routed dajmono permesas aƭtomatan ĝisdatigon de la IP enkursigila tabelo\n"
+"per la RIP protokolo. Kvankam RIP estas vaste uzata je malgrandaj retoj,\n"
+"pli malsimplaj enkursigaj protokoloj estas bezonataj por malsimplaj retoj."
#: ../../lang.pm:1
#, c-format
-msgid "Hong Kong"
-msgstr "Hongkongo"
+msgid "Kiribati"
+msgstr "Kiribato"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "China"
-msgstr "Ĉinio"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Guyana"
-msgstr "Gujano"
+msgid "Browse"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Guinea-Bissau"
-msgstr "Gvineo-BisaĆ­o"
+msgid "CDROM"
+msgstr "KDROMO"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Guam"
-msgstr "Gvamo"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "Ĉu vi deziras provi konekti al la interreto nun?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Guatemala"
-msgstr "Gvatemalo"
+msgid "Belgian"
+msgstr "Belga"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "Sud-Georgio kaj la Sudaj Sandviĉaj Insuloj"
+msgid "Do you have an ISA sound card?"
+msgstr "Ĉu vi havas ISA-sonkarton?"
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Equatorial Guinea"
-msgstr "Ekvatora Gvineo"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
+msgstr ""
+"Mi ne detektas eterretan retadaptilom sur via sistemo.\n"
+"Mi ne povas konfiguri tiun konektotipon."
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Guadeloupe"
-msgstr "Gvadelupo"
+msgid "Windows"
+msgstr "Vindozo"
-#: ../../lang.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Guinea"
-msgstr "Gvineo"
+msgid "Can't make screenshots before partitioning"
+msgstr "Mi ne povas fari ekranfotojn antaĆ­ ol fari subdiskojn"
-#: ../../lang.pm:1
-#, c-format
-msgid "Gambia"
-msgstr "Gambio"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Host Name"
+msgstr "PoƝtejo"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Greenland"
-msgstr "Groenlando"
+msgid "/File/Save _As"
+msgstr "/Dosiero/Savu _Kiel"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Gibraltar"
-msgstr "Ĝibraltaro"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Ghana"
-msgstr "Ganao"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "French Guiana"
-msgstr "Franca Gujano"
+msgid "Delay before booting default image"
+msgstr "Prokrastoperiodo antaĆ­ starti defaĆ­ltan sistemon"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Georgia"
-msgstr "Kartvelujo"
+msgid "Restrict command line options"
+msgstr "Limigu komandliniajn opciojn"
-#: ../../lang.pm:1
-#, c-format
-msgid "Grenada"
-msgstr "Grenado"
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "East Europe"
+msgstr "EĆ­ropo"
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "United Kingdom"
-msgstr "Unuiĝinta Regno"
+msgid "Use free space"
+msgstr "Uzu liberan spacon"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Gabon"
-msgstr "Gabono"
+msgid "use dhcp"
+msgstr "uzu dhcp"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Faroe Islands"
+msgid "Mail alert"
msgstr ""
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Micronesia"
-msgstr "Mikronezio"
+msgid "Internet configuration"
+msgstr "Interreta konfigurado"
#: ../../lang.pm:1
#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Falklandaj Insuloj (Malvinoj)"
+msgid "Uzbekistan"
+msgstr "Uzbekistano"
-#: ../../lang.pm:1
-#, c-format
-msgid "Fiji"
-msgstr "Fiĝio"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Detected %s"
+msgstr "Duobla surmetingo %s"
-#: ../../lang.pm:1
-#, c-format
-msgid "Finland"
-msgstr "Finnlando"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _printers"
+msgstr "Malproksima printilo"
-#: ../../lang.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "Ethiopia"
-msgstr "Etiopio"
+msgid "Finish"
+msgstr "Finu"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Spain"
-msgstr "Hispanujo"
+msgid "Show automatically selected packages"
+msgstr "Montru aƭtomate elektitajn pakaĔojn"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Eritrea"
-msgstr "Eritreo"
+msgid "CPU flags reported by the kernel"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Western Sahara"
-msgstr "Okcidenta Saharo"
+msgid "Togo"
+msgstr "Togo"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Egypt"
-msgstr "Egipto"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Estonia"
-msgstr "Estonio"
+msgid "16 MB"
+msgstr "16 MB"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Ecuador"
-msgstr "Ekvadoro"
+msgid "Please try again"
+msgstr "Bonvole provu denove"
-#: ../../lang.pm:1
-#, c-format
-msgid "Algeria"
-msgstr "Alĝerio"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The model is correct"
+msgstr "Ĉu tio ĉi pravas?"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Dominican Republic"
-msgstr "Domingo"
+msgid "FAT resizing failed: %s"
+msgstr "Regrandeciĝo de FAT malsukcesis: %s"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Dominica"
-msgstr "Dominiko"
+msgid "Individual package selection"
+msgstr "Elektado de individuaj pakaĔoj"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Denmark"
-msgstr "Danlando"
+msgid "This partition is not resizeable"
+msgstr "Ĉi tiu subdisko ne estas regrandecigebla"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Djibouti"
-msgstr "Ĝibutio"
+msgid "Location"
+msgstr "Loko"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Cyprus"
-msgstr "Kipro"
+msgid "USA (cable-hrc)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Christmas Island"
-msgstr "Kristnask-Insulo"
+msgid "Journalised FS"
+msgstr "Journalised FS"
#: ../../lang.pm:1
#, c-format
-msgid "Cape Verde"
-msgstr "Kabo-Verdo"
+msgid "Guatemala"
+msgstr "Gvatemalo"
-#: ../../lang.pm:1
-#, c-format
-msgid "Cuba"
-msgstr "Kubo"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "This machine"
+msgstr "konformanta(j)"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Colombia"
-msgstr "Kolombio"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "DOS-a diskingolitero: %s (nur konjekto)\n"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Cameroon"
-msgstr "Kameruno"
+msgid "Select the files or directories and click on 'OK'"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Chile"
-msgstr "Ĉilio"
+msgid "Bahrain"
+msgstr "Barejno"
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Cook Islands"
-msgstr "Kuk-Insularo"
+msgid "omit scsi modules"
+msgstr "forlasu SCSI-ajn modulojn"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Cote d'Ivoire"
-msgstr "Ebur-Bordo"
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Switzerland"
-msgstr "Svislando"
+msgid ""
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Congo (Brazzaville)"
-msgstr "Kongo (Brazavilo)"
+msgid "Keyboard layout: %s\n"
+msgstr "Klavara aranĝo: %s\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Central African Republic"
-msgstr "Centrafrika Respubliko"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Congo (Kinshasa)"
-msgstr "Kongo (KinƝaso)"
+msgid "Maltese (US)"
+msgstr "Malta (US)"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Kokos-Insuloj (Keeling)"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"Muntas kaj malmuntas ĉiujn RetDosierSistemajn (NFS), SMB (Lan\n"
+"Manager/Vindozaj), kaj NCP (NetWare) surmetingojn."
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Canada"
-msgstr "Kanado"
+msgid "Tvcard"
+msgstr "Tvcard"
-#: ../../lang.pm:1
-#, c-format
-msgid "Belize"
-msgstr "Belizio"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Toggle between normal/expert mode"
+msgstr "Ɯanĝu al Normala reĝimo"
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Belarus"
-msgstr "Belarusio"
+msgid "Size"
+msgstr "Grandeco"
-#: ../../lang.pm:1
-#, c-format
-msgid "Botswana"
-msgstr "Bocvano"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "GRUB"
+msgstr "GB"
#: ../../lang.pm:1
#, c-format
-msgid "Bouvet Island"
-msgstr "Buvet-Insulo"
+msgid "Greenland"
+msgstr "Groenlando"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Bhutan"
-msgstr "Butano"
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Loĝiteka MouseMan+/FirstMouse+"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bahamas"
-msgstr "Bahamoj"
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Brazil"
-msgstr "Brazilo"
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid ""
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
+msgstr ""
+"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"
-#: ../../lang.pm:1
-#, c-format
-msgid "Bolivia"
-msgstr "Bolivio"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Delete All NBIs"
+msgstr "Elektu dosieron"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Brunei Darussalam"
-msgstr "Brunejo Darusalamo"
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Bermuda"
-msgstr "Bermudo"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Benin"
-msgstr "Benino"
+msgid "Which configuration of XFree do you want to have?"
+msgstr "Kiun konfiguron de XFree vi deziras havi?"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Burundi"
-msgstr "Burundo"
+msgid "More"
+msgstr "Plu"
-#: ../../lang.pm:1
-#, c-format
-msgid "Bahrain"
-msgstr "Barejno"
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+"Kun ĉi tiu sekurnivelo, uzado de ĉi tiu komputilo kiel servilo ebliĝas.\n"
+"La sekureco nun estas sufiĉe alta por uzi la sistemon kiel servilo kiu\n"
+"akceptas konektojn de multaj klientoj."
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Bulgaria"
-msgstr "Bulgario"
+msgid "Account Password"
+msgstr "Konta Pasvorto"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Burkina Faso"
-msgstr "Burkino"
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
+msgstr ""
+"Vi decidis instali la startilon en subdiskon.\n"
+"Tio implicas ke vi jam havas startilon sur la fiskdisko kiun vi startigas "
+"(ekz-e: System Commander).\n"
+"\n"
+"En kiu drajvo vi startigas?"
-#: ../../lang.pm:1
-#, c-format
-msgid "Bangladesh"
-msgstr "BangladeƝo"
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Tajik keyboard"
+msgstr "Taja klavaro"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Barbados"
-msgstr "Barbado"
+msgid ""
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Bosnio-Hercegovino"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Font List"
+msgstr "Surmetingo"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Azerbaijan"
-msgstr "Azerbajĝano"
+msgid ""
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Aruba"
-msgstr "Arubo"
+msgid ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
+msgstr ""
+"Ɯajne vi havas malnovegan aƭ nekonatan maƝinon,\n"
+"la yaboot-startilo ne funkcios por vi.\n"
+"La instalado daĆ­rigos, sed vi devos\n"
+"uzi BootX aƭ alian rimedon por startigi vian maƝinon"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Australia"
-msgstr "Auxstralio"
+msgid "Select file"
+msgstr "Elektu dosieron"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "American Samoa"
-msgstr "Amerika Samoo"
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
+msgstr ""
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Argentina"
-msgstr "Argentino"
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Antarctica"
-msgstr "Antarktio"
+msgid "Japan"
+msgstr "Japanio"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Print option list"
+msgstr "Printilaj opcioj"
+
+#: ../../standalone/localedrake:1
#, c-format
-msgid "Angola"
-msgstr "Angolo"
+msgid "The change is done, but to be effective you must logout"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Netherlands Antilles"
-msgstr "Nederlandaj Antiloj"
+msgid "Search servers"
+msgstr "Serĉu servilojn"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Armenia"
-msgstr "Armenio"
+msgid "NCP queue name missing!"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Albania"
-msgstr "Albanio"
+msgid ""
+"Warning, another internet connection has been detected, maybe using your "
+"network"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Anguilla"
-msgstr "Angilo"
+msgid "Cd-Rom labeled \"%s\""
+msgstr "KDROM etikedata \"%s\""
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Antigvo-Barbudo"
+msgid ""
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
+msgstr ""
+"Savas kaj restaƭras sisteman entropikomunaĔon por pli altkvalita\n"
+"generado de aleatoraj nombroj."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "United Arab Emirates"
-msgstr "Unuiĝintaj Arabaj Emirlandoj"
+msgid ""
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
+msgstr ""
+"Mi malsukcesis kontroli la dosiersistemon %s. Ĉu vi deziras ripari la "
+"erarojn? (atentu, vi povas perdi datenojn)"
-#: ../../lang.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Andorra"
-msgstr "Andoro"
+msgid "Turn your computer into a reliable server"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Afghanistan"
-msgstr "Afganistano"
+msgid " (driver %s)"
+msgstr " (pelilo: %s)"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
+msgid ""
+"Loopback file(s):\n"
+" %s\n"
+msgstr ""
+"Retrokonekta(j) dosiero(j):\n"
+"...%s\n"
-#: ../../loopback.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Cirklaj surmetingoj %s\n"
+msgid "I don't know"
+msgstr "Mi ne scias"
-#: ../../lvm.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Forigu la logikajn spacojn unue\n"
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr ""
-#: ../../modules.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
-msgstr "PCMCIA-subteno ne ekzistas plu por 2.2-kernoj. Bonvole uzu 2.4-kernon."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "MOVU VIAN RADON!"
+msgid ""
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
+msgstr ""
+"\n"
+"\n"
+"Via karto nun uzas la %s\"%s\"-pelilon (defaĆ­lta plelilo por via karto estas "
+"\"%s\")"
-#: ../../mouse.pm:1
-#, c-format
-msgid "To activate the mouse,"
-msgstr "Por aktivigi la muson,"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Post Uninstall"
+msgstr "Eliru instalprogramon"
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Please test the mouse"
-msgstr "Bonvole, provu la muson"
+msgid " ("
+msgstr ""
-#: ../../mouse.pm:1
-#, c-format
-msgid "No mouse"
-msgstr "Neniu Muso"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cpuid level"
+msgstr "Elektas sekurnivelon"
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "none"
-msgstr "neniu"
+msgid "Mongolian (cyrillic)"
+msgstr "Mongola (cirila)"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "3 buttons"
-msgstr "3 butonoj"
+msgid "Add a module"
+msgstr "Aldonu modulon"
-#: ../../mouse.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "2 buttons"
-msgstr "2 butonoj"
+msgid "Profile to delete:"
+msgstr ""
-#: ../../mouse.pm:1
-#, c-format
-msgid "1 button"
-msgstr "1 butona"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Local measure"
+msgstr "Lokaj dosieroj"
#: ../../mouse.pm:1
#, c-format
msgid "busmouse"
msgstr "bus-muso"
-#: ../../mouse.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid "Account Login (user name)"
+msgstr "Konta Salutnomo (uzula nomo)"
-#: ../../mouse.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Loĝiteka Muso (seria, malnova C7 speco)"
+msgid "Fdiv bug"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid ""
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "MM Series"
-msgstr "MM Serio"
+msgid "Benin"
+msgstr "Benino"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid "Uruguay"
+msgstr "Urugvajo"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Loĝiteka MouseMan+/FirstMouse+"
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Path selection"
+msgstr "Elektado de individuaj pakaĔoj"
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Logitech CC Series"
-msgstr "Loĝiteka CC serio"
+msgid "Name/IP address of host:"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+msgid "Monitor: %s\n"
+msgstr "Ekrano: %s\n"
-#: ../../mouse.pm:1
+#: ../../partition_table/raw.pm:1
#, c-format
-msgid "Logitech MouseMan"
-msgstr "Loĝiteka MouseMan"
+msgid ""
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
+msgstr ""
+"Io malbona okazas en via drajvo.\n"
+"Testo pri la integreco de datenoj malsukcesis.\n"
+"Tio signifas ke skribado al la disko finiĝos per difektitaj datenoj."
-#: ../../mouse.pm:1
-#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Mikrosofta IntelliMouse"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer host name or IP missing!"
+msgstr "Printilaj PoƝtejo"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Nespecifa 3 Butona Muso"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check all users that you want to include in your backup."
+msgstr "Bonvole, elektu la pakaĔojn kiujn vi deziras instali."
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Nespecifa 2 Butona Muso"
+msgid ""
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "serial"
-msgstr "seria"
+msgid "Bangladesh"
+msgstr "BangladeƝo"
-#: ../../mouse.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Microsoft Explorer"
-msgstr "Mikrosofta Esplorilo"
+msgid "Japan (cable)"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Wheel"
-msgstr "Rado"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Generic"
-msgstr "Genera"
+msgid "Initial tests"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid "Continue"
+msgstr "Ĉu mi devus daƭri?"
-#: ../../mouse.pm:1
-#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Custom Restore"
+msgstr "Akomodata"
-#: ../../mouse.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Nespecifa PS2 RadoMuso"
+msgid ""
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Loĝiteka MouseMan+"
+msgid "Script-based"
+msgstr "Programeto-bazata"
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../install_any.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "Standard"
-msgstr "LaĆ­norma"
+msgid "Error reading file %s"
+msgstr "Eraro legante dosiero %s"
-#: ../../mouse.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - Muso"
+msgid "PLL setting:"
+msgstr "PLL-konfiguraĔo:"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Ɯanĝu inter ebena kaj ordigita je grupoj"
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "Vi devas havi FAT-subdiskon en /boot/efi"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Collapse Tree"
-msgstr "Maletendu Arbon"
+msgid " on "
+msgstr ""
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Expand Tree"
-msgstr "Etendu Arbon"
+msgid "The URL must begin with http:// or https://"
+msgstr "La URL devas komenci per http:// aĆ­ https://"
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Info"
-msgstr "Informo"
+msgid ""
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
+msgstr ""
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Is this correct?"
-msgstr "Ĉu tio ĉi pravas?"
+msgid "Other OS (SunOS...)"
+msgstr "Alia Mastruma Sistemo (SunOS...)"
-#: ../../my_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgid "Install/Upgrade"
+msgstr "Instalado/Ĝisdatigo"
-#: ../../partition_table.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Error writing to file %s"
-msgstr "Eraro skribante al dosiero %s"
+msgid "%d packages"
+msgstr "%d pakaĔoj"
-#: ../../partition_table.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Bad backup file"
-msgstr "Malbona rezerva dosiero"
+msgid ""
+"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
+"Backup and Restore application\n"
+"\n"
+"--default : save default directories.\n"
+"--debug : show all debug messages.\n"
+"--show-conf : list of files or directories to backup.\n"
+"--config-info : explain configuration file options (for non-X "
+"users).\n"
+"--daemon : use daemon configuration. \n"
+"--help : show this message.\n"
+"--version : show version number.\n"
+msgstr ""
+"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
+"Savkopi- kaj Restaƭro-akplikaĔo\n"
+"\n"
+"--default : savu defaĆ­ltajn dosierujojn.\n"
+"--debug : montru ĉiujn ripar-mesaĝojn (debug).\n"
+"--show-conf : listo de dosieroj aĆ­ dosierujoj savendaj.\n"
+"--config-info : klarigu la opciojn de konfigurado-dosieroj (por ne-X-"
+"uzuloj).\n"
+"--daemon : uzu demonan konfiguradon. \n"
+"--help : montru tiun ĉi mesaĝon.\n"
+"--version : montru la versi-numeron.\n"
-#: ../../partition_table.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "RestaĆ­ris el dosiero %s malsukcesis: %s"
+msgid "Domain Authentication Required"
+msgstr "AĆ­tentikigado de domajno postulata"
-#: ../../partition_table.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"\n"
+"\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
msgstr ""
-"Vi havas truon en via subdisktabelo sed mi ne povas uzi ĝin.\n"
-"La sola solvo estas movi viajn ĉefajn subdiskojn por situigi la truon\n"
-"apud la etendataj subdiskoj."
-#: ../../partition_table.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Ĉi tiu platformo ne subtenas etendatajn subdiskojn"
+msgid "Costa Rica"
+msgstr "Kostariko"
-#: ../../partition_table.pm:1
-#, c-format
-msgid "mount failed: "
-msgstr "muntado malsukcesis: "
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid "Use libsafe for servers"
+msgstr "Elektu opciojn por servilo"
-#: ../../pkgs.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "maybe"
-msgstr "elbe"
+msgid "Icelandic"
+msgstr "Islanda"
-#: ../../pkgs.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "nice"
-msgstr "agrabla(j)"
+msgid ""
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
+"\n"
+"Uzado: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
-#: ../../pkgs.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "very nice"
-msgstr "tre agrabla(j)"
+msgid "Please relog into %s to activate the changes"
+msgstr "Bonvolu resaluti en %s-n por aktivigi la Ɲanĝojn."
-#: ../../pkgs.pm:1
+#: ../../my_gtk.pm:1
#, c-format
-msgid "important"
-msgstr "grava(j)"
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-#: ../../pkgs.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "must have"
-msgstr "havenda"
+msgid "Lilo/grub mode"
+msgstr "Lilo/grub modalo"
-#: ../../raid.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ne estas sufiĉaj subdiskoj por RAID nivelo %d\n"
+msgid "Output"
+msgstr "Skribu"
-#: ../../raid.pm:1
+#: ../../loopback.pm:1
#, c-format
-msgid "mkraid failed"
-msgstr "mkraid malsukcesis"
+msgid "Circular mounts %s\n"
+msgstr "Cirklaj surmetingoj %s\n"
-#: ../../raid.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid malsukcesis (eble raidtools mankas)"
+msgid "Martinique"
+msgstr "Martiniko"
-#: ../../raid.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Ne povas aldoni subdiskon al _formatita_ RAID md%d"
+msgid "HardDrive / NFS"
+msgstr ""
-#: ../../services.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Stop"
-msgstr "Haltu"
+msgid "a number"
+msgstr "numero"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Start"
-msgstr "Startu"
+msgid "Swedish"
+msgstr "Sveda"
-#: ../../services.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "On boot"
-msgstr "Startante"
+msgid "Which %s driver should I try?"
+msgstr "Kiun %s pelilon devus mi provi?"
-#: ../../services.pm:1
+#: ../../standalone/logdrake:1
#, c-format
msgid ""
-"No additional information\n"
-"about this service, sorry."
+"You will receive an alert if one of the selected services is no longer "
+"running"
msgstr ""
-"Ne pli da informo\n"
-"pri tiu servo, bedaĆ­rinde."
-#: ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Services and deamons"
-msgstr "Servoj kaj demonoj"
+msgid "Filesystem types:"
+msgstr "Specoj de dosiersistemoj:"
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "stopped"
-msgstr "haltigita"
+msgid ", multi-function device on HP JetDirect"
+msgstr ""
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "running"
-msgstr "ruliĝante"
+msgid "Northern Mariana Islands"
+msgstr "Insuloj Marianaj Nordaj"
-#: ../../services.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Elektu kiuj servoj estu aĆ­tomate startigotaj dum starto"
+msgid "none"
+msgstr "neniu"
-#: ../../services.pm:1
-#, c-format
-msgid "Database Server"
-msgstr "Datumbaz-servilo"
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "user :"
+msgstr "Salutnomo"
-#: ../../services.pm:1
-#, c-format
-msgid "Remote Administration"
-msgstr "Malproksima administrado"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please enter your password"
+msgstr "Bonvole provu denove"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "File sharing"
-msgstr "Dosier-kundivido"
+msgid ""
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
+msgstr ""
-#: ../../services.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Internet"
-msgstr "Interreto"
+msgid "Floppy"
+msgstr "Disketo"
-#: ../../services.pm:1
-#, c-format
-msgid "Printing"
-msgstr "Presante"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "Bonvolu klaki sur subdiskon"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Startigas la X tiparan servilon (tio estas ... ."
+msgid "Ghostscript referencing"
+msgstr ""
-#: ../../services.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Ɯargu la pelilojn por via usb-aparatoj."
+msgid "Bootloader"
+msgstr "StartƝargilo"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
-msgstr ""
-"Syslog (sistemlogilo) estas la rimedo per kiu multaj dajmonoj registras\n"
-"mesaĝojn al diversaj sistemlogdosieroj. Ĝi estas bona ideo ĉiam uzi\n"
-"syslog."
+msgid "Move"
+msgstr "Movu"
-#: ../../services.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Lanĉu la sonsistemon en via maƝino"
+msgid "Bootloader to use"
+msgstr "StartƝargilo por uzi"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"La rwho protokolo permesas al uzuloj havigi liston de ĉiuj el la uzuloj\n"
-"konektataj ĉe komputilo kiu estas uzanta la rwho dajmono (simila al finger)."
+msgid "SMB server host"
+msgstr "PoƝtejo de SMB servilo"
-#: ../../services.pm:1
-#, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"La ruser protokolo permesas al uzuloj sur reto identigi kiujn estas\n"
-"konektataj ĉe aliaj respondantaj komputiloj."
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Name Servers:"
+msgstr "NIS Servilo"
-#: ../../services.pm:1
+#: ../../install_messages.pm:1
#, c-format
msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
msgstr ""
-"La rstat protokolo permesas al uzuloj sur reto ekstrakti metrikojn\n"
-"pri la rapideco de iu ajn komputilo sur tiu reto."
+"\n"
+"Averto\n"
+"Bonvolu zorge legi la suban tekston. Se vi malsamopinias kun iu\n"
+"parto, vi ne rajtas instali la venontan KD-enhavon. Premu 'Rifuzas'\n"
+"por daĆ­rigi la instaladon sen uzi tiun KD-enhavon.\n"
+"\n"
+"\n"
+"Iuj komponantoj entenataj en la venonta KD ne estas regataj\n"
+"de la GPL-licenco aƭ similaj interkonsentoj. Ĉiu tia komponanto estas\n"
+"tiam regata de la teksto kaj kondiĉoj de ĝia propra specifa licenco.\n"
+"Bonvolu zorge legi tiajn specifajn licencojn kaj agi laĆ­ ili antaĆ­\n"
+"ol uzi aĆ­ redisdoni la nomitajn komponantojn.\n"
+"Tiaj licencoj ĝenerale malhelpas transdonon, duobligon\n"
+"(escepte por savkopioj), redistribuadon, 'reverse engineering',\n"
+"malmuntadon, malkompiladon aĆ­ modifadon de la komponento.\n"
+"Ĉia rompo de la konsento tuj ĉesigos viajn rajtojn sub\n"
+"la respektiva licenco. Escepte se la specifa licenco donas al vi tiajn\n"
+"rajtojn, vi kutime ne povas instali la programojn sur pli ol unu\n"
+"sistemo, aƭ adapti ĝin por uzi ĝin en reto. En duba kazo bonvole kontaktu\n"
+"rekte la disdoninton aĆ­ la eldoninton de la komponanto.\n"
+"Transdonado al triaj partoj aĆ­ kopiado de tiaj komponantoj inkluzive de la \n"
+"dokumentaĔo normale estas malpermesita.\n"
+"\n"
+"\n"
+"Ĉiuj rajtoj pri la komponantoj de la venonta KD apartenas al ties\n"
+"respektivaj aĆ­toroj kaj estas protektataj de leĝoj pri intelekta propraÄ”o "
+"kaj\n"
+"kopirajto aplikeblaj al softvaraj programoj.\n"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
msgstr ""
-"La routed dajmono permesas aƭtomatan ĝisdatigon de la IP enkursigila tabelo\n"
-"per la RIP protokolo. Kvankam RIP estas vaste uzata je malgrandaj retoj,\n"
-"pli malsimplaj enkursigaj protokoloj estas bezonataj por malsimplaj retoj."
#: ../../services.pm:1
#, c-format
msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
msgstr ""
+"Linuksa Virtuala servilo, uzata por starigi kapablegan kaj\n"
+"bonege atingeblan servilon."
-#: ../../services.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Savas kaj restaƭras sisteman entropikomunaĔon por pli altkvalita\n"
-"generado de aleatoraj nombroj."
+msgid "4 billion colors (32 bits)"
+msgstr "4 miliardoj koloroj (32 bitoj)"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix estas PoƝtTransportPerilo, kiu estas la programo kiu movas\n"
-"retpoƝton de unu komputilo al alia."
+msgid "Micronesia"
+msgstr "Mikronezio"
-#: ../../services.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"La pordmapilo direktas RPC konektojn, kiujn protokoloj kiel NFS kaj NIS "
-"uzas.\n"
-"La pordmapservilo devas esti uzata ĉe komputiloj kiuj agas kiel serviloj\n"
-"por protokoloj kiuj uzas la RPC mekanismon."
+msgid "License"
+msgstr "Licenco"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
+msgid "This may take a moment to generate the keys."
msgstr ""
-"PCMCIA subteno kutime estas subteno de aĔo kiel ethernet kaj modemoj en\n"
-"tekkomputiloj. Ĝi ne estos lanĉata krom se vi konfiguras ĝi por ke ĝi\n"
-"estu sendanĝera ĉe komputiloj kiuj ne bezonas ĝin."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Subteno de OKI 4w kaj kongruaj winpresiloj."
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgstr ""
-#: ../../services.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
+msgid "Sagem (using pppoa) usb"
msgstr ""
-#: ../../services.pm:1
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
-"NFS estas populara protokolo por dosierdistribuado tra TCP/IP retoj.\n"
-"Ĉi tiu servo provizas NFS dosierƝlosado."
+"Eraro okazis - neniuj validaj aparatoj estis trovata sur kiuj vi povas krei "
+"novajn dosiersistemojn. Bonvolu kontroli vian ekipaÄ”on por la kaĆ­zo de ĉi "
+"tiu problemo."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Starting the printing system at boot time"
+msgstr "Kiun printsistemo vi deziras uzi?"
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS estas populara protokolo por dosierdistribuado tra TCP/IP retoj.\n"
-"Ĉi tiu servo provizas NFS dosierƝlosado, kiun vi konfiguras per la\n"
-"/etc/exports dosiero."
+msgid "Do you want to start the connection at boot?"
+msgstr "Ĉu vi deziras starti vian konektaĔon je startado de la sistemo?"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
+msgid "Processor ID"
msgstr ""
-"Ɯaltas/MalƝaltas ĉiujn retajn interfacojn konfiguratajn por lanĉi\n"
-"dum sistemstartado."
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
+msgid "Sound trouble shooting"
msgstr ""
-"Muntas kaj malmuntas ĉiujn RetDosierSistemajn (NFS), SMB (Lan\n"
-"Manager/Vindozaj), kaj NCP (NetWare) surmetingojn."
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) estas Domajna NomServilo (DNS) kiun vi uzas por trovi\n"
-"poƝtejojn de IP adresoj."
+msgid "Polish (qwerty layout)"
+msgstr "Pola (qwerty aranĝo)"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "activate now"
+msgstr "Aktiva"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
+"\n"
+"Drakbackup activities via CD:\n"
+"\n"
msgstr ""
-"Linuksa Virtuala servilo, uzata por starigi kapablegan kaj\n"
-"bonege atingeblan servilon."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
msgstr ""
-"lpd estas la printvica dajmono bezonata por lpr taƭge funkcii. Ĝi estas\n"
-"baze servilo kiu arbitracias printajn taskojn al printilo(j)."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
+msgid "Host \"%s\", port %s"
msgstr ""
-"Linuxconf aranĝos kelkfoje por fari diversajn taskojn\n"
-"dum starto por daƭrigi la sistem-konfiguraĔon."
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Auxtomata detektado kaj konfigurado de aparataro dum starto."
+msgid "This partition can't be used for loopback"
+msgstr "Vi ne povas uzi ĉi tiun subdiskon por retrokonektado"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Auxtomata regenerado de kernokapoj en /boot por\n"
-"/usr/include/linux/{autoconf, version}.h"
+msgid "File already exists. Use it?"
+msgstr "Dosiero jam ekzistas. Ĉu vi deziras uzi ĝin?"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
+msgid "received: "
msgstr ""
-"Ĉi tiu pakaÄ”o Ɲargas la elektitan klavarmapon laĆ­ /etc/sysconfig/keyboard.\n"
-"Vi povas elekti ĉi tion per la kbdconfig utilprogramo. Vi lasus ĉi tion\n"
-"ebligatan por la plejmulto da sistemoj."
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
+msgid "Right Alt key"
msgstr ""
-"Lanĉu pakaÄ”filtradon por Linuksa kerno 2.2-serioj, por konfiguri\n"
-"brulmuron por protekti vian maƝinon kotraƭ elretaj atakoj."
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
+msgid "the list of alternative drivers for this sound card"
msgstr ""
-"La interreta superservila demono (kutime nomata inetd) lanĉas sortimenton\n"
-"da aliaj interretaj servoj laƭbezone. Ĝi respondas por la lanĉo de multaj\n"
-"servoj, inkluzive de telnet, ftp, rsh, kaj rlogin. Se vi malƝaltas inetd,\n"
-"ve malƝaltas ĉiujn el la servoj por kiuj ĝi respondas."
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache estas Tut-Tera TeksaÄ”a servilo. Ĝi liveras HTML-ajn dosierojn\n"
-"kaj CGI (komunakluza interfaco)."
+msgid "Gateway"
+msgstr "Kluzo"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scanner sharing"
+msgstr "Printilo"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake rulas aparato-provon, kaj laĆ­opcie konfiguras\n"
-"novan/Ɲanĝitan aparataron."
+msgid "Tonga"
+msgstr "Tongo"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM aldonas subtenon por musoj al teksta-reĝimaj Linuksaj aplikoj ekzemple\n"
-"la 'Midnight Commander' (Meznokta Estro). Ankaƭ ĝi permesas uzi la muson\n"
-"por transpoƝigi ĉe la konzolo (Sen X Fenestroj)."
+msgid "Tunisia"
+msgstr "Tunizio"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Profile: "
+msgstr "muntado malsukcesis: "
+
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
+"Click on a device in the left tree in order to display its information here."
msgstr ""
-"cron estas norma Uniksa programo kiu lanĉas programojn kiujn la uzulo\n"
-"specifas je periodaj tempoj. vixie cron aldonas kelkajn trajtojn al la\n"
-"baza Uniksa cron, inkluzive de pli bona sekureco kaj pli fortaj\n"
-"konfiguraj opcioj."
-#: ../../services.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
+msgid "XawTV isn't installed!"
msgstr ""
-"Lanĉas ordonojn vicigitajn per la 'at' ordono je la horo specifita kiam\n"
-"'at' estis uzata, kaj lanĉas baĉajn ordonojn kiam la Ɲargmezo estas\n"
-"sufiĉe malgranda."
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"Create/Transfer\n"
+"backup keys for SSH"
msgstr ""
-"apmd estas uzata por monitori la bateriostaton kaj registri ĝin en la\n"
-"sistemlogdosiero (syslog). Vi ankaƭ povas uzi ĝin por halti la komputilon\n"
-"kiam la baterioƝargo estas malgranda."
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron, perioda ordonvicigilo."
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr ""
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgid "old static device name used in dev package"
msgstr ""
-"Lanĉu la ALSA (Advanced Linux Sound Architecture - Avancita Linuksa Son-"
-"Arkitekturo)-sonsistemon"
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Installing packages..."
-msgstr "Instalanta pakaĔojn..."
+msgid "This label is already used"
+msgstr "Ĉi tiu etikedo estas jam uzata"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-msgstr ""
+"Welcome to the Printer Setup Wizard\n"
"\n"
-"Uzado: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-
-#: ../../standalone.pm:1
-#, c-format
-msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
-" [ĉio]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
-#: ../../standalone.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+msgid "After formatting partition %s, all data on this partition will be lost"
msgstr ""
+"Post vi formatas la subdiskon %s, ĉiuj datenoj en ĉi tiu subdisko estos\n"
+"perdata"
-#: ../../standalone.pm:1
-#, c-format
-msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
-msgstr ""
-"[OPCIO]...\n"
-" --no-confirmation ne postulu unue konfirmadon en MandrakeUpdate mode\n"
-" --no-verify-rpm ne kontrolu la pakaÄ”-subskribojn\n"
-" --changelog-first afiƝu changelog antaƭ dosierliston en la priskribo-"
-"fenestro\n"
-" --merge-all-rpmnew proponu mergi ĉiujn trovitajn .rpmnew/.rpmsave -"
-"dosierojn"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connection Time: "
+msgstr "Speco de konekto"
-#: ../../standalone.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "select perm file to see/edit"
+msgstr ""
-#: ../../standalone.pm:1
-#, c-format
+#: ../../standalone/livedrake:1
+#, fuzzy, c-format
msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
-"[OPCIOJ]\n"
-"Reto & Interret-konektad kaj afiƝad-aplikaÄ”o\n"
+"Ɯanĝu vian KDROM!\n"
"\n"
-"--defaultintf interface : montras tiun interfacon defaĆ­lte\n"
-"--connect : konektas kun interreto se ne jam konektite\n"
-"--disconnect : malkonektas de interreto se jam konektite\n"
-"--force : uzata kun (dis)connect : trudas (mal-)konektadon.\n"
-"--status : montras 1 se konektite, alie 0, poste eliras.\n"
-"--quiet : ne estu interaktiva. Uzata kun (dis)connect."
+"Bonvole, enƝovu la KDROM-on etikedatan \"%s\" en via drajvo kaj klaku \"Jes"
+"\"\n"
+"kiam vi finos.\n"
+"Se vi ne havas ĝin, klaku \"Nuligu\" por eviti la instaladon de ĉi tiu KDROM."
-#: ../../standalone.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgid "Use group id for execution"
+msgstr ""
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "[keyboard]"
-msgstr "[klavaro]"
+msgid "Choose the default user:"
+msgstr "Elektu la defaĆ­ltan uzulon:"
-#: ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
-msgstr ""
-"[OPCIOJ]...\n"
-"Konfigurilo de Mandrak-Terminal-Servilo\n"
-"--enable : ebligu MTS\n"
-"--disable : malebligu MTS\n"
-"--start : startigu MTS\n"
-"--stop : haltigu MTS\n"
-"--adduser : aldonu ekzistantan sistem-uzulon al MTS (postulas "
-"uzulnomon)\n"
-"--deluser : forigu ekzistantan sistem-uzulon de MTS (postulas "
-"uzulnomon)\n"
-"--addclient : aldonu kliento-maƝinon al MTS (postulas MAC-adreson, IP, "
-"nbi image-nomon)\n"
-"--delclient : forigu kliento-maƝinon de MTS (postulas MAC-adreson, IP, "
-"nbi image nomon)"
+msgid "Gabon"
+msgstr "Gabono"
-#: ../../standalone.pm:1
-#, c-format
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
+"\n"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
msgstr ""
-"Litertipar-Import-kaj afiƝ- aplikaÄ”o \n"
-"--windows_import : importu de ĉiuj atingeblaj vindozaj subdiskoj.\n"
-"--xls_fonts : montru ĉiujn litertiparojn jam ekzistantajn de xls\n"
-"--strong : forta kontrolado de litertiparo.\n"
-"--install : akceptu ĉian litertipar-dosieron kaj ĉian dosierujon.\n"
-"--uninstall : malinstalu ĉian litertiparon kaj ĉian litertiparan "
-"dosierujon.\n"
-"--replace : anstataƭigu ĉian litertiparon se jam ekzistas\n"
-"--application : 0 nenia aplikaĔo.\n"
-" : 1 ĉiuj haveblaj aplikaÄ”oj subtenataj.\n"
-" : name_of_application aĆ­ iel tiel por staroffice \n"
-" : kaj gs por ghostscript nur por tiu ĉi."
+"Kun malproksima CUPS servilo, vi ne devas konfiguri iun printilon\n"
+"ĉi tie; printiloj estos aƭtomate dektektataj. Se vi havas dubojn,\n"
+"elektu \"Malproksima CUPS servilo\"."
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
msgstr ""
-"[OPCIOJ] [PROGRAM_NOMO]\n"
-"\n"
-"OPCIOJ:\n"
-" --help - montru tiun help-mesaĝon.\n"
-" --report - programo estu iu de mandrake tools\n"
-" --incident - programo estu iu de mandrake tools"
+"Vi povas elektu aliajn lingvojn kiujn estos uzeblaj malantaĆ­ la instalado"
-#: ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default : save default directories.\n"
-"--debug : show all debug messages.\n"
-"--show-conf : list of files or directories to backup.\n"
-"--config-info : explain configuration file options (for non-X "
-"users).\n"
-"--daemon : use daemon configuration. \n"
-"--help : show this message.\n"
-"--version : show version number.\n"
-msgstr ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Savkopi- kaj Restaƭro-akplikaĔo\n"
-"\n"
-"--default : savu defaĆ­ltajn dosierujojn.\n"
-"--debug : montru ĉiujn ripar-mesaĝojn (debug).\n"
-"--show-conf : listo de dosieroj aĆ­ dosierujoj savendaj.\n"
-"--config-info : klarigu la opciojn de konfigurado-dosieroj (por ne-X-"
-"uzuloj).\n"
-"--daemon : uzu demonan konfiguradon. \n"
-"--help : montru tiun ĉi mesaĝon.\n"
-"--version : montru la versi-numeron.\n"
+msgid "Domain"
+msgstr "Domajno"
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "Preciza kvanto de memoro se bezonata (trovis %d MB)"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
msgstr ""
-"Tiu ĉi programo estas libera softvaro; vi povas redisdoni ĝin kaj/aƭ modifi\n"
-"ĝin sub la termoj de la GNU-Ĝeneralpublika Licenco kiel publikigita de\n"
-"la Libera Programar FondaĔo (Free Software Foundation); aƭ versio 2, aƭ\n"
-"laĆ­ via opcio) pli posta versio.\n"
+"LILO kaj grub estas GNU/Linuksaj startigiloj. Normale, tiu paƝo estas "
+"komplete\n"
+"aĆ­tomata. DrakX analizos la startsektoron de la disko kaj agas laĆ­ tio\n"
+"kion ĝi trovas tie:\n"
"\n"
-"Tiu ĉi programo estas disdonata kun la espero ke ĝi estu utila,\n"
-"sed SEN IA GARANTIO; eĉ sen garantio pri MERKATOTAUXGECO aƭ\n"
-"TAUXGECO POR APARTA CELO. Vidu la\n"
-"GNU Ĝeneralpublikan Licencon pri pli da detaloj.\n"
+" * se ĝi trovas vindozan startsektoron, ĝi anstataƭigos tiun per grub/LILO-"
+"a startsektoro.\n"
+"Tiel vi povos Ɲargi aƭ GNU/Linukson aƭ alian mastrumsistemon.\n"
"\n"
-"Vi devus esti ricevinta kopion de la GNU Ĝeneralpublika Licenco\n"
-"kun tiu ĉi programo; se ne, skribu al la Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" * se ĝi trovas grub- aƭ LILO-startsektoron, ĝi anstataƭigos tiun per "
+"nova.\n"
+"\n"
+" * se ĝi ne povas determini, DrakX demandos vin kien ĝi metu la\n"
+"startigilon.\n"
+"\n"
+"\"Boot device\": En plej multaj okazoj, vi ne Ɲanĝu la defaƭltan (\"Unua\n"
+"sektoro de la disko (MBR)\"), sed se vi preferas, la startigilo povas esti\n"
+"instalata sur la dua fiksdisko (\"/dev/hdb\"), aƭ eĉ sur disketo\n"
+"(\"Sur disketo\")."
-#: ../../steps.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Exit install"
-msgstr "Eliru instalprogramon"
+msgid "Provider dns 2 (optional)"
+msgstr "Provizanto DNS 2 (nedeviga)"
-#: ../../steps.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Install updates"
-msgstr "Instalu ĝisdatigojn"
+msgid "Boot device"
+msgstr "Starta aparato"
-#: ../../steps.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Configure services"
-msgstr "Konfiguru servojn"
+msgid "Which partition do you want to resize?"
+msgstr "Kiun subdiskon vi deziras regrandecigi?"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configure X"
-msgstr "Konfiguru X"
+msgid "United States Minor Outlying Islands"
+msgstr "usonaj malgrandaj eksteraj insuloj"
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Install bootloader"
-msgstr "Instalu restart-Ɲargilon"
+msgid "A tool to monitor your logs"
+msgstr "Ilo por vidi vian logdosieron"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configure networking"
-msgstr "Konfiguru retumon"
+msgid "Djibouti"
+msgstr "Ĝibutio"
-#: ../../steps.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Add a user"
-msgstr "Aldonu uzulon"
+msgid "detected on port %s"
+msgstr "detektita en pordo %s"
-#: ../../steps.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Root password"
-msgstr "Root-pasvorto"
+msgid "LPD"
+msgstr ""
-#: ../../steps.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Install system"
-msgstr "Instalu sistemon"
+msgid "Graphics card: %s\n"
+msgstr "Grafika karto: %s\n"
-#: ../../steps.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Choose packages to install"
-msgstr "Elektu pakaĔojn"
+msgid "Yaboot"
+msgstr "Yaboot"
-#: ../../steps.pm:1
-#, c-format
-msgid "Format partitions"
-msgstr "Formatu subdiskojn"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you are using a DVDRAM device"
+msgstr "Bonvolu klaki sur subdiskon"
-#: ../../steps.pm:1
-#, c-format
-msgid "Partitioning"
-msgstr "Subdiskigante"
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Splash selection"
+msgstr "Elektado de individuaj pakaĔoj"
-#: ../../steps.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Choose your keyboard"
-msgstr "Elektu vian klavaron"
+msgid "Extended partition not supported on this platform"
+msgstr "Ĉi tiu platformo ne subtenas etendatajn subdiskojn"
-#: ../../steps.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Select installation class"
-msgstr "Elektu instalklason"
+msgid "ISDN Configuration"
+msgstr "ISDN-a KonfiguraĔon"
-#: ../../steps.pm:1
-#, c-format
-msgid "Hard drive detection"
-msgstr "Detektado de fiksdisko(j)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "high"
+msgstr "Alta"
-#: ../../steps.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Configure mouse"
-msgstr "Konfiguru muson"
+msgid "Internet Connection Sharing"
+msgstr "Disdividado de Interreta Konekto"
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "License"
-msgstr "Licenco"
+msgid "Choose file"
+msgstr "Elektu dosieron"
-#: ../../steps.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Language"
-msgstr "Elektu vian lingvon"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
+msgstr ""
+"Averto. Ekzistanta konfiguraĔo de barilo detektata. Vi eble devas permane\n"
+"fiksi ĝin poste de la instalado."
-#: ../../ugtk2.pm:1
-#, c-format
-msgid "utopia 25"
-msgstr "utopia 25"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "Haltas de la reto"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "OK"
-msgstr "Jes"
+msgid ""
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
+msgstr ""
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer default settings"
+msgstr "Printilan Konekton"
+
+#: ../../mouse.pm:1
#, c-format
-msgid "logdrake"
-msgstr "logdrake"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Nespecifa PS2 RadoMuso"
-#: ../../ugtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgid "Removing old printer \"%s\"..."
+msgstr "Foriganta la malnovan presilon \"%s\"..."
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Select a device !"
+msgstr "Elektu grafikan karton"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove selected server"
+msgstr "Malinstalu printvicon"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installad-ekran-pelilo)"
+msgid "French Southern Territories"
+msgstr "francaj sudaj teritorioj"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+msgid "the vendor name of the processor"
msgstr ""
-"Via karto povas havi 3D aparatan akceladon, sed nur kun XFree %s.\n"
-"NOTU KE ĈI TIO ESTAS EKSPERIMENTA SUBTENO KAJ EBLE SVENIGOS VIAN KOMPUTILON."
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s kun EKSPERIMENTA 3D aparata akcelado"
+msgid "All data on this partition should be backed-up"
+msgstr "Ĉiuj datenoj en ĉi tiu subdisko devus esti rezervata"
-#: ../../Xconfig/card.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Vi povas havi 3D aparatan akceladan subtenon kun XFree %s."
+msgid "Installing package %s"
+msgstr "Instalanta pakaĔo %s"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s kun 3D aparata akcelado"
+msgid "Checking device and configuring HPOJ..."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
msgstr ""
-"Via karto povas havi 3D aparatan akceladon, sed nur kun XFree %s.\n"
-"NOTU KE ĈI TIO ESTAS EKSPERIMENTA SUBTENO KAJ EBLE SVENIGOS VIAN "
-"KOMPUTILON.\n"
-"XFree %s subtenas vian karton kiu eble havas pli bonan subtenon en 2D."
+"Por havi plu da subdiskoj, bonvole forigu unu por povi krei etendigitan\n"
+"subdiskon"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
msgstr ""
-"Via karto povas havi 3D aparatan akceladon, sed nur kun XFree %s.\n"
-"XFree %s subtenas vian karton kiu eble havas pli bonan subtenon en 2D."
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Konfiguru nur karton \"%s\"%s"
-
-#: ../../Xconfig/card.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Use Xinerama extension"
-msgstr "Uzu Xinerama extension"
+msgid "Choose packages to install"
+msgstr "Elektu pakaĔojn"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configure all heads independently"
-msgstr "Konfiguru ĉiujn kapojn sendepende"
+msgid ""
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Kiun konfiguron de XFree vi deziras havi?"
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr ""
+"Ĉiuj ekzistantaj subdiskoj kaj iliaj datenoj estos perdata sur drajvo %s"
-#: ../../Xconfig/card.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "XFree configuration"
-msgstr "XFree Konfigurado"
+msgid ""
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
+msgstr ""
+"Via komputilo ne havas sufiĉe da spaco por instalado aƭ promocio (%d > %d)."
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Elektu memorkapaciton de via grafika karto"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
msgstr ""
-"Via sistemo subtenas multkapo-konfiguradon.\n"
-"Kion vi deziras fari?"
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Multi-head configuration"
-msgstr "Plur-ekrana konfiguraĔo"
+msgid "Bhutan"
+msgstr "Butano"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Choose an X server"
-msgstr "Elektu X-servilon"
+msgid "Network interface"
+msgstr "Reta interfaco"
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "X server"
-msgstr "X servilo"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Reading printer data..."
+msgstr "Legas datumbason de CUPS peliloj..."
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "64 MB or more"
-msgstr "64 MB aĆ­ pli"
+msgid "Korean keyboard"
+msgstr "Korea klavaro"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "32 MB"
-msgstr "32 MB"
+msgid "Not connected"
+msgstr "Ne konektita"
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "16 MB"
-msgstr "16 MB"
+msgid "Greek"
+msgstr "Greka"
-#: ../../Xconfig/card.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "8 MB"
-msgstr "8 MB"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "4 MB"
-msgstr "4 MB"
+msgid "Saint Kitts and Nevis"
+msgstr "Sent-Kristofo kaj Neviso"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "2 MB"
-msgstr "2 MB"
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "1 MB"
-msgstr "1 MB"
+msgid "Enable OF Boot?"
+msgstr "Ĉu ebligi OF Boot?"
-#: ../../Xconfig/card.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "512 kB"
-msgstr "512 KB"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "Vi ne povas uzi JFS por subdisko pli malgranda ol 16MB"
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "256 kB"
-msgstr "256 KB"
+msgid "Monitor VertRefresh: %s\n"
+msgstr "Ekrana vertikala refreƝigrapido (vertical refresh rate): %s\n"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
+msgid "path"
msgstr ""
-"Ĉu vi deziras teni la Ɲanĝojn?\n"
-"Nuna konfiguro estas:\n"
-"\n"
-"%s"
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Options"
-msgstr "Opcioj"
+msgid "Mount point"
+msgstr "Surmetingo"
-#: ../../Xconfig/main.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Test"
-msgstr "Testo"
+msgid ""
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
+msgstr ""
+"Eraro okazis:\n"
+"%s\n"
+"Provu Ɲanĝi iujn parametrojn"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore system"
+msgstr "Instalu sistemon"
+
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Resolution"
-msgstr "Distingivo"
+msgid ""
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
+msgstr ""
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Monitor"
-msgstr "Ekrano"
+msgid "The DHCP end ip"
+msgstr ""
-#: ../../Xconfig/main.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Graphic Card"
-msgstr "Grafik-karto"
+msgid "Another one"
+msgstr "Iu alia"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Vertical refresh rate"
-msgstr "Vertikala refreƝigrapido (vertical refresh rate)"
+msgid "Drakbackup"
+msgstr ""
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Horizontala sinkronrapido (horizontal sync rate)"
+msgid "Colombia"
+msgstr "Kolombio"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"La du gravegaj parametroj estas la vertikala refreƝigrapido (vertical\n"
-"refresh rate) kiu estas la rapido por refreƝigi la tutan ekranon, kaj\n"
-"plej grave la horizontala sinkronrapido (horizontal sync rate), kiu estas\n"
-"la rapido por montri skanliniojn.\n"
+"Current configuration of `%s':\n"
"\n"
-"Ĝi estas TRE GRAVA ke vi ne elektas specon de ekrano kiu havas\n"
-"sinkronamplekson kiu estas preter la kapabloj de via ekrano: vi eble\n"
-"difektus vian ekranon. Se vi dubas, elektu zorgeman opcion."
-
-#: ../../Xconfig/monitor.pm:1
-#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
msgstr ""
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Vendor"
-msgstr "Vendinto"
-
#: ../../Xconfig/monitor.pm:1
#, c-format
msgid "Plug'n Play"
msgstr ""
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose a monitor"
-msgstr "Elektu ekranon"
+msgid "Reunion"
+msgstr "Reunio"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Graphics card: %s"
-msgstr "Grafika karto: %s"
+msgid "Details"
+msgstr "Detaloj"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Elektu distingivon kaj kolorprofundon"
+msgid "For security reasons, it will be disconnected now."
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Resolutions"
-msgstr "Distingivoj"
+msgid "Synchronization tool"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 miliardoj koloroj (32 bitoj)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Checking your system..."
+msgstr "Kiun printsistemo vi deziras uzi?"
-#: ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 milionoj koloroj (24 bitoj)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Print"
+msgstr "Printilo"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mil koloroj (16 bitoj)"
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mil koloroj (15 bitoj)"
+msgid "Mongolia"
+msgstr "Mongolio"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 koloroj (8 bitoj)"
+msgid "Mounted\n"
+msgstr "Muntita\n"
-#: ../../Xconfig/test.pm:1
-#, c-format
-msgid "Is this the correct setting?"
-msgstr "Ĉu tiu ĉi konfigurado ĝustas?"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Graphical Interface"
+msgstr "Grafika interfaco"
-#: ../../Xconfig/test.pm:1
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Eliras post %d sekundoj"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore Users"
+msgstr "RestaĆ­ru de dosiero"
-#: ../../Xconfig/test.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Encryption key for %s"
+msgstr "La pasvortoj ne egalas"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
-"Eraro okazis:\n"
-"%s\n"
-"Provu Ɲanĝi iujn parametrojn"
+"La pordmapilo direktas RPC konektojn, kiujn protokoloj kiel NFS kaj NIS "
+"uzas.\n"
+"La pordmapservilo devas esti uzata ĉe komputiloj kiuj agas kiel serviloj\n"
+"por protokoloj kiuj uzas la RPC mekanismon."
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Detected hardware"
+msgstr "Vidu hardvaran informon"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Averto: provado de ĉi tiu grafika-karto eble svenigos vian komputilon"
+msgid "Mauritius"
+msgstr "MaĆ­ricio"
-#: ../../Xconfig/test.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Ĉu vi deziras provi la konfiguraĔon?"
+msgid "Myanmar (Burmese)"
+msgstr "Mianmara (burma)"
-#: ../../Xconfig/test.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Test of the configuration"
-msgstr "Provu konfiguraĔon"
+msgid "Enabling swap partition %s"
+msgstr "Ebligas swap-subdiskon %s"
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "What norm is your TV using?"
-msgstr "Kiun normon uzas via TV?"
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgstr ""
+"Ne ekzistas FAT-a subdiskoj por regrandecigi\n"
+"aƭ uzi kiel retrokonektaj subdiskoj (aƭ ne estas sufiĉa da spaco)spaco)"
-#: ../../Xconfig/various.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Armenian (old)"
+msgstr "Armena (malnova)"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
msgstr ""
-"Via grafika karto Ɲajnas havi TV-OUT-konektilon.\n"
-"Ĝi konfigureblas por funkcii uzante frame-buffer.\n"
-"\n"
-"Por tio vi devas konekti vian grafikan karton al via televidilo antaĆ­ ol "
-"startigi vian komputilon.\n"
-"Poste elektu la \"TVout\"-eniron en la startigilo\n"
-"\n"
-"Ĉu vi havas tiun konektilon?"
-#: ../../Xconfig/various.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
msgstr ""
-"Mi povas konfiguri vian komputilon tiel ke ĝi aƭtomate lanĉos X kiam ĝi\n"
-"ekfunkcias. Ĉu vi deziras ke X aƭtomate lanĉos?"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Graphical interface at startup"
-msgstr "X Fenestro ĉe komenco"
+msgid ", host \"%s\", port %s"
+msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 pelilo: %s\n"
+msgid "Monaco"
+msgstr "Monako"
-#: ../../Xconfig/various.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 servilo: %s\n"
+msgid "%s formatting of %s failed"
+msgstr "%s formatado de %s malsukcesis"
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Resolution: %s\n"
-msgstr "Distingivo: %s\n"
+msgid "Partitioning failed: %s"
+msgstr "Dispartigado malsukcesis: %s"
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Kolorprofuneco: %s\n"
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "Canada (cable)"
+msgstr "Kanada (Kebeka)"
-#: ../../Xconfig/various.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Upgrade"
+msgstr "Ĝisdatigu"
+
+#: ../../help.pm:1
#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Graifka memoro: %s KB\n"
+msgid "Workstation"
+msgstr "Laborstacio"
-#: ../../Xconfig/various.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Grafika karto: %s\n"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"Instalas pakaĔo %s\n"
+"%d%%"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Ekrana vertikala refreƝigrapido (vertical refresh rate): %s\n"
+msgid "Kyrgyzstan"
+msgstr "Kirgizistano"
-#: ../../Xconfig/various.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "With basic documentation"
+msgstr "Kun baza dokumentaĔo (rekomendita!)"
+
+#: ../../services.pm:1
#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Ekrana horizontala sinkronrapido (horizontal sync rate): %s\n"
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anacron, perioda ordonvicigilo."
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Monitor: %s\n"
-msgstr "Ekrano: %s\n"
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"Vi devas havi radikan subdiskon.\n"
+"Por ĉi tiu, kreu subdiskon (aƭ klaku estantan).\n"
+"Sekve elektu la agon \"Surmetingo\" kaj faru ĝin '/'"
-#: ../../Xconfig/various.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Musaparato: %s\n"
+msgid "Proxy should be http://..."
+msgstr "Prokura servilo devus esti http://..."
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Speco de muso: %s\n"
+msgid "South Africa"
+msgstr "Sud-Afriko"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Klavara aranĝo: %s\n"
+msgid "Western Sahara"
+msgstr "Okcidenta Saharo"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Options: %s"
-msgstr "Opcioj: %s"
+msgid "Etherboot Floppy/ISO"
+msgstr ""
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Modify printer configuration"
+msgstr "Interreta Konfigurado"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mount point: "
-msgstr "Surmetingo: "
+msgid "Choose a partition"
+msgstr "Elektu subdiskon"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Server: "
-msgstr "Servilo:"
+msgid "Edit current rule"
+msgstr ""
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "La URL devas komenci per http:// aĆ­ https://"
+msgid "%s"
+msgstr ""
-#: ../../diskdrake/dav.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Bonvole entajpu la servilan URL de la WebDAV"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
+msgstr ""
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Mount point"
-msgstr "Surmetingo"
+msgid "Please test the mouse"
+msgstr "Bonvole, provu la muson"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Other Media"
+msgstr "Alia"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup system files"
+msgstr "Malbona rezerva dosiero"
+
+#: ../../mouse.pm:1
#, c-format
-msgid "Server"
-msgstr "Servilo"
+msgid "Logitech MouseMan+"
+msgstr "Loĝiteka MouseMan+"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mount"
-msgstr "Muntu"
+msgid "Sector"
+msgstr "Sektoro"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unmount"
-msgstr "Malmuntu"
+msgid "Qatar"
+msgstr "Kataro"
-#: ../../diskdrake/dav.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "New"
-msgstr "Nova"
+msgid "LDAP Base dn"
+msgstr ""
-#: ../../diskdrake/dav.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+"You can't select this package as there is not enough space left to install it"
msgstr ""
-"WebDAV estas protokolo kiu ebligas al vi kroĉi interretservilan dosierujon\n"
-"loke, kaj trakti ĝin kvazaƭ lokan dosiersistemon (kondiĉe ke la retservilo "
-"estu\n"
-"konfigurita kiel WebDAV-servilo). Se vi deziras aldoni WebDAF-kroĉpunktojn,\n"
-"elektu \"New\"."
+"Vi ne povas elekti ĉi tiun pakaÄ”on ĉar ne estas sufiĉe da spaco por instali\n"
+"ĝin."
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Uzu ``%s'' anstataĆ­e"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "generate auto-install floppy"
+msgstr "Kreu aĆ­toinstalan disketon"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Type"
-msgstr "Tipo"
+msgid "Dialing mode"
+msgstr "Diskuma modalo"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Uzu ``Malmuntu'' antaĆ­e"
+msgid "File sharing"
+msgstr "Dosier-kundivido"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Delete"
-msgstr "Forigu"
+msgid "Clean /tmp at each boot"
+msgstr "Purigu /tmp dum ĉiuj startadoj"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Create"
-msgstr "Kreu"
+msgid "Malawi"
+msgstr "Malavio"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Filesystem types:"
-msgstr "Specoj de dosiersistemoj:"
+msgid "Please choose your type of mouse."
+msgstr "Bonvole elektu la specon de via muso."
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Empty"
-msgstr "Malplena"
+msgid "class of hardware device"
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Windows"
-msgstr "Vindozo"
+msgid ""
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "United Kingdom"
+msgstr "Unuiĝinta Regno"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "running"
+msgstr "ruliĝante"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Swap"
-msgstr "InterƝanĝa"
+msgid "default"
+msgstr "defaĆ­lta"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Journalised FS"
-msgstr "Journalised FS"
+msgid "Indonesia"
+msgstr "Indonezio"
-# this entry must not be too long, or the window gets tooooo wiiiiiide
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Ext2"
-msgstr "Ext2"
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "France [SECAM]"
+msgstr "Franca"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "No hard drives found"
-msgstr "Neniaj durdiskoj trovitaj"
+msgid "restrict"
+msgstr "limigu"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Please click on a partition"
-msgstr "Bonvolu klaki sur subdiskon"
+msgid "must have"
+msgstr "havenda"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
msgstr ""
-"Vi havas unu grandan MicroSoft-Vindozan subdiskon.\n"
-"Mi proponas ke vi unue regrandecigu tiun subdiskon\n"
-"(klaku sur ĝin, kaj poste klaku sur \"Regrandecigu\")"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose action"
-msgstr "Elektu agon"
+msgid "Senegal"
+msgstr "Senegalio"
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Wizard"
-msgstr "Sorĉisto"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Command line"
+msgstr "Domajna nomo"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
msgstr ""
-"Se vi intencas uzi \"aboot\", zorgu lasi liberan spacon (2048 sektoroj "
-"sufiĉas)\n"
-"ĉe la komenco de la disko"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Bonvolu fari rezervan kopion de via dateno antaĆ­e"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Read carefully!"
-msgstr "Legu zorge"
+msgid "access to administrative files"
+msgstr "aliro al administraj dosieroj"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Encryption key (again)"
+msgid ""
+"Error during sendmail.\n"
+" Your report mail was not sent.\n"
+" Please configure sendmail"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "The encryption keys do not match"
-msgstr "La pasvortoj ne egalas"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
+msgid ", multi-function device on parallel port \\#%s"
msgstr ""
-"Ĉi tiu pasvorto ests tro simpla (ĝi devas esti almenaƭ %d signoj longa)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose your filesystem encryption key"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Filesystem encryption key"
-msgstr "Speco de dosiersistemo: "
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Type: "
-msgstr "Speco: "
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "on channel %d id %d\n"
-msgstr "ĉe kanalo %d identigaÄ”o %d\n"
+msgid "Montserrat"
+msgstr "Montserato"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Subdiskotabelospeco: %s\n"
+msgid "Automatic dependencies"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-aj (Redundanca Aro de Malmultekostaj Diskoj) diskoj %s\n"
+msgid "Swap"
+msgstr "InterƝanĝa"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Info: "
-msgstr "Informo: "
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connecting to the Internet "
+msgstr "Konektu al la Interreto"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrio: %s cilindroj, %s kapoj, %s sektoroj\n"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore Other"
+msgstr "RestaĆ­ru de dosiero"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Size: %s\n"
-msgstr "Grandeco: %s\n"
+msgid "TV card"
+msgstr "TV-karto"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Read-only"
-msgstr "Nur-lege"
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "SMB/Vindozo 95/98/NT"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Device: "
-msgstr "Aparato: "
+msgid ", "
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (umask)\n"
"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
+"Set the root umask."
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove selected host/network"
+msgstr "Malinstalu printvicon"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
msgstr ""
-"\n"
-"Povas esti, ke tiu ĉi subdisko estas\n"
-"pelila subdisko. Prefere\n"
-"lasu ĝin sola.\n"
+"Postfix estas PoƝtTransportPerilo, kiu estas la programo kiu movas\n"
+"retpoƝton de unu komputilo al alia."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Loopback file name: %s"
-msgstr "Retrokonekta dosieronomo: %s"
+msgid "Disconnection from the Internet failed."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-aj (Redundanca Aro de Malmultekostaj Diskoj) diskoj %s\n"
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
+msgstr ""
+"Ĉi tie vi povas elekti la klavon aƭ klavkombinon kiu\n"
+"ebligos al vi Ɲalti inter la diversaj klavaroj\n"
+"(ekz-e latinaj kaj ne-latinaj)"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Grandeco de pecoj %s\n"
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Network Hotplugging"
+msgstr "Reta KonfiguraĔo"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Level %s\n"
-msgstr "Nivelo %s\n"
+msgid "if set to yes, reports check result to tty."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore From CD"
+msgstr "RestaĆ­ru de disketo"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-"Subdisko startata defaĆ­lte\n"
-" (por MS-DOS starto, ne por \"lilo\")\n"
+"Nun kiam via Interreta konekto estas konfigurata,\n"
+"vi povas konfiguri vian komputilon por disdividi ĝian Interretan konekton.\n"
+"Notu: vi bezonas dediĉan Retadaptilon por konfiguri Lokan Reton (LAN).\n"
+"\n"
+"Ĉu vi deziras konfiguri Disdividadon de Interreta Konekto?\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
msgid ""
-"Loopback file(s):\n"
-" %s\n"
+"Please choose which network adapter you want to use to connect to Internet."
msgstr ""
-"Retrokonekta(j) dosiero(j):\n"
-"...%s\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID (Redundanca Aro de Malmultekostaj Diskoj) md%s\n"
+"Bonvole elektu kiun retadaptilon vi deziras uzi por konekti al la interreto"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mounted\n"
-msgstr "Muntita\n"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Not formatted\n"
-msgstr "Ne formatita\n"
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Formatted\n"
-msgstr "Formatita\n"
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Internet Connection Sharing is now disabled."
+msgstr "Disdividado de Interreta Konekto nuntempe malkapabligata"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "cilindro %d ĝis cilindro %d\n"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektoroj"
+msgid "Latin American"
+msgstr "Latinamerika"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Size: %s"
-msgstr "Grandeco: %s"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Japanese text printing mode"
+msgstr "Konfiguru retumon"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Komenco: sektoro %s\n"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Old device file"
+msgstr "Elektu dosieron"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Name: "
-msgstr "Nomo: "
+msgid "Info: "
+msgstr "Informo: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS-a diskingolitero: %s (nur konjekto)\n"
+msgid "Button `%s': %s"
+msgstr "Butono '%s': %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "partition %s is now known as %s"
-msgstr "subdisko %s estas nun konata kiel %s"
+msgid "Please wait"
+msgstr "Bonvole atendu"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Removing %s"
-msgstr "Mi forigas %s"
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Copying %s"
-msgstr "Kopianta %s"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "None"
+msgstr "Finata"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Moving files to the new partition"
-msgstr "Mi movas dosierojn al la nova subdisko"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The entered IP is not correct.\n"
+msgstr "Ĉu tio ĉi pravas?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+msgid "Ethernet Card"
msgstr ""
-"Dosierujo %s entenas jam datenojn\n"
-"(%s)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Hide files"
-msgstr "KaƝu dosierojn"
+msgid "Info"
+msgstr "Informo"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Move files to the new partition"
-msgstr "Movu dosierojn al la nova subdisko"
+msgid "Install"
+msgstr "Instalu"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
msgstr ""
-"Post vi formatas la subdiskon %s, ĉiuj datenoj en ĉi tiu subdisko estos\n"
-"perdata"
-#: ../../diskdrake/interactive.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Vi bezonos restarti antaƭ ol la Ɲanĝo povas efektiviĝi"
+msgid "Exit install"
+msgstr "Eliru instalprogramon"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "La subdisktabelo de drajvo %s estos skribata al disko!"
+msgid ""
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "La pakaÄ”o %s estas bezonata. Ĉu instali ĝin?"
+msgid "Remote CUPS server"
+msgstr "Malproksima CUPS-a servilo"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "What type of partitioning?"
-msgstr "Kiun specon de subdiskado?"
+msgid "Sun - Mouse"
+msgstr "Sun - Muso"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Zorgu: ĉi tiu operacio estas danĝera."
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
+msgstr ""
+"Ekzitas nur unu konfigurita retadaptilo sur via sistemo:\n"
+"\n"
+"%s\n"
+"\n"
+"Ĉu vi deziras konfiguri vian Lokan Reton (LAN) kun ĉi tiu adaptilo?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "chunk size"
-msgstr "grandeco de pecoj"
+msgid "Minimal install"
+msgstr "Minimuma instalado"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "level"
-msgstr "nivelo"
+msgid "Ethiopia"
+msgstr "Etiopio"
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "device"
-msgstr "aparato"
+msgid "Devanagari"
+msgstr "devanagara"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Various"
-msgstr "Diversaj"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mount options"
-msgstr "Kroĉ-opcioj"
+msgid "Total size: %d / %d MB"
+msgstr "Tuta grandeco: %d / %d MB"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "File already exists. Use it?"
-msgstr "Dosiero jam ekzistas. Ĉu vi deziras uzi ĝin?"
+msgid "disabled"
+msgstr "malebligita"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "Dosiero jam uzata de alia retrokonektado, elektu alian"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Search for new scanners"
+msgstr "Loka printilo"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Give a file name"
-msgstr "Donu dosiernomon"
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Disabling servers..."
+msgstr "Detektas aparatojn..."
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Filesystem type: "
-msgstr "Speco de dosiersistemo: "
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr "Bonvole, elektu la pakaĔojn kiujn vi deziras instali."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Size in MB: "
-msgstr "Grandeco en MB: "
+msgid "Installation of %s failed. The following error occured:"
+msgstr "Instalado de %s malsukcesis. La sekvanta eraro okazis:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Loopback file name: "
-msgstr "Retrokonekta dosieronomo: "
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Loopback"
-msgstr "Retrokonektado"
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "Vi ne povas uzi ĉi tiun subdiskon por retrokonektado"
+msgid "Network printer (TCP/Socket)"
+msgstr "Reta Printilo (TCP/ingo)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup User files..."
+msgstr "Malbona rezerva dosiero"
+
+#: ../../steps.pm:1
#, c-format
-msgid "LVM name?"
-msgstr "LVM-nomo?"
+msgid "Install system"
+msgstr "Instalu sistemon"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "new"
-msgstr "nova"
+msgid "First DNS Server (optional)"
+msgstr "Unu DNS-a Servilo (nedeviga)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose an existing LVM to add to"
+msgid ""
+"Alternatively, you can specify a device name/file name in the input line"
msgstr ""
-"Elektu ekzistantan RAID (Redundanca Aro de Malmultekostaj Diskoj) por\n"
-"aldoni al"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Elektu ekzistantan RAID por aldoni"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "dhcpd Config..."
+msgstr "Mi konfiguras..."
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Moving partition..."
-msgstr "Movas subdisko..."
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The setup has already been done, but it's currently disabled."
+msgstr ""
+"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Moving"
-msgstr "Movante"
+msgid "LILO/grub Installation"
+msgstr "LILO/grub Instalado"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "Al kiu sektoro vi deziras movi?"
+msgid "Israeli"
+msgstr "Israela"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Sector"
-msgstr "Sektoro"
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "load setting"
+msgstr "Formatas"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "Al kiu disko vi deziras movi?"
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "Presilo \"%s\" en servilo \"%s\""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Move"
-msgstr "Movu"
+msgid "Floppy can be removed now"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "New size in MB: "
-msgstr "Nova grandeco en MB: "
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Truly minimal install"
+msgstr "Minimuma instalado"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose the new size"
-msgstr "Elektu la novan grandecon"
+msgid "Denmark"
+msgstr "Danlando"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Resize"
-msgstr "Regrandecigu"
+msgid "Moving partition..."
+msgstr "Movas subdisko..."
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Post vi regrandecigas subdiskon %s, ĉiuj datenoj en ĉi tiu subdisko estos\n"
-"perdata"
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "(This) DHCP Server IP"
+msgstr "IP de SMB servilo"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Ĉiuj datenoj en ĉi tiu subdisko devus esti rezervata"
+msgid "Test of the configuration"
+msgstr "Provu konfiguraĔon"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "This partition is not resizeable"
-msgstr "Ĉi tiu subdisko ne estas regrandecigebla"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing %s ..."
+msgstr "Instalanta pakaĔo %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Kalkulas FAT dosiersistemajn limojn"
+msgid ""
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
+"\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
+"\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
+"\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
+"\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
+msgstr ""
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "Kie vi deziras kroĉi aparaton %s?"
+msgid "Choose your filesystem encryption key"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
msgstr ""
-"Ne povas malfiksi surmetingon ĉar ĉi tiu subdisko estas uzata por\n"
-"retrokonektado. Unue forigu la retrokonektadon."
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Kie vi deziras munti aparato %s?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "Kie vi deziras kroĉi retrokonektan dosieron %s?"
+msgid "Andorra"
+msgstr "Andoro"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "Ɯaltas de ext2 al ext3"
+msgid "Sierra Leone"
+msgstr "Siera-Leono"
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which filesystem do you want?"
-msgstr "Kiun dosierosistemo vi deziras uzi?"
+msgid "Botswana"
+msgstr "Bocvano"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Change partition type"
-msgstr "Ɯanĝu subdiskspecon"
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "(default value: %s)"
+msgstr " (DefaĆ­lta)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
+msgid "Alternative test page (Letter)"
msgstr ""
-"Post vi Ɲanĝas la specon de subdisko %s, ĉiuj datenoj en ĉi tiu subdisko "
-"estos\n"
-"perdata"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Remove the loopback file?"
-msgstr "Ĉu forigu la retrokonektan dosieron?"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+"DHCP Server Configuration.\n"
+"\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
+"\n"
msgstr ""
-"Vi ne povas krei novan subdiskon\n"
-"(ĉar vi atingis la maksimuman nombron da primaraj subdiskoj).\n"
-"Unue forigu primaran subdiskon kaj kreu etenditan subdiskon."
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Preference: "
-msgstr "Prefero: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Start sector: "
-msgstr "Komenca sektoro: "
+msgid "Choose an X server"
+msgstr "Elektu X-servilon"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Create a new partition"
-msgstr "Kreu novan subdiskon"
+msgid "Swap partition size in MB: "
+msgstr "InterƝanĝa subdiska grandeco en MB: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use for loopback"
-msgstr "Uzu por retrokonektado"
+msgid ""
+"Other (not drakbackup)\n"
+"keys in place already"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Modify RAID"
-msgstr "Ɯanĝu RAID (Redundanca Aro de Malmultekostaj Diskoj)"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "No changes to backup!"
+msgstr "Malbona rezerva dosiero"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Remove from LVM"
-msgstr "Forigu de LVM (Redundanca Aro de Malmultekostaj Diskoj)"
+msgid "Formatted\n"
+msgstr "Formatita\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Remove from RAID"
-msgstr "Forigu de RAID (Redundanca Aro de Malmultekostaj Diskoj)"
+msgid "Type of install"
+msgstr "Instaltipo"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Add to LVM"
-msgstr "Aldonu al LVM (Redundanca Aro de Malmultekostaj Diskoj)"
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "Presilo \"%s\" sur SMB/vindoza servilo \"%s\""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add to RAID"
-msgstr "Aldonu al RAID (Redundanca Aro de Malmultekostaj Diskoj)"
+msgid ""
+"\n"
+"- Daemon (%s) include:\n"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Format"
-msgstr "Formatu"
+msgid "%d comma separated numbers"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Detailed information"
-msgstr "Detala informo"
+msgid ""
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
+msgstr ""
+"La ruser protokolo permesas al uzuloj sur reto identigi kiujn estas\n"
+"konektataj ĉe aliaj respondantaj komputiloj."
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Trying to rescue partition table"
-msgstr "Provas savi subdisktabelon"
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Automatic Steps Configuration"
+msgstr "Post-instala konfigurado"
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
msgstr ""
-"EnƝovu disketon en drajvo\n"
-"Ĉiuj datenoj sur tiu disketo estos perdata"
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Warning"
-msgstr "Averto"
+msgid "Barbados"
+msgstr "Barbado"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Select file"
-msgstr "Elektu dosieron"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please select data to backup..."
+msgstr "Bonvole, elektu lingvon por uzi."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
msgstr ""
-"La rezerva subdisktabelo ne estas la sama grandeco\n"
-"Ĉu daƭras tamen?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Removable media automounting"
-msgstr "Aƭtomata kroĉado de demeteblaj aparatoj"
+msgid "received"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Reload partition table"
-msgstr "ReƝargu subdiskotabelon"
+msgid "/File/_New"
+msgstr "/Dosiero/_Nova"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Rescue partition table"
-msgstr "Sava subdiskotabelo"
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The DNS Server IP"
+msgstr "IP de SMB servilo"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Restore partition table"
-msgstr "RestaĆ­ru subdiskotabelon"
+msgid "IP Range End:"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Save partition table"
-msgstr "Konservu la subdiskotabelon"
+msgid "High"
+msgstr "Alta"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
+msgid "NoVideo"
msgstr ""
-"Por havi plu da subdiskoj, bonvole forigu unu por povi krei etendigitan\n"
-"subdiskon"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "I can't add any more partition"
-msgstr "Mi ne povas aldoni plu da subdiskoj"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "All primary partitions are used"
-msgstr "Ĉiuj el la subdiskoj estas uzata"
+msgid "this field describes the device"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hard drive information"
-msgstr "Informoj pri fiksdisko(j)"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Auto allocate"
-msgstr "AĆ­tomate disponigu"
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Local Printers"
+msgstr "Loka printilo"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Clear all"
-msgstr "ForviƝu ĉion"
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Installation image directory"
+msgstr "LAN KonfiguraĔo"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Ĉu vi deziras konservi la modifojn en /etc/fstab?"
+msgid "NIS Server"
+msgstr "NIS Servilo"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Ĉu eliru sen skribi la subdisktabelon?"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Port: %s"
+msgstr "Pordo"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Quit without saving"
-msgstr "Ĉu eliru sen konservi"
+msgid "Spain"
+msgstr "Hispanujo"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Continue anyway?"
-msgstr "Ĉu mi devus daƭri malgraƭe?"
+msgid "This user name has already been added"
+msgstr "Ĉi tiu salutnomo estas jam aldonita"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1
#, c-format
-msgid "Toggle to expert mode"
-msgstr "Ɯanĝu al Spertula reĝimo"
+msgid "Choose a file"
+msgstr "Elektu dosieron"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Toggle to normal mode"
-msgstr "Ɯanĝu al Normala reĝimo"
+msgid "Apply"
+msgstr "Apliku"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Undo"
-msgstr "Malfaru"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Auto-detect available ports"
+msgstr "Malproksima printilo"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Exit"
-msgstr "Eliro"
+msgid "Internet Connection Sharing currently disabled"
+msgstr "Disdividado de Interreta Konekto nuntempe malkapabligata"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose a partition"
-msgstr "Elektu subdiskon"
+msgid "San Marino"
+msgstr "San-Marino"
-#: ../../diskdrake/interactive.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Choose another partition"
-msgstr "Elektu alian subdiskon"
+msgid "Belgium"
+msgstr "Belgio"
-#: ../../diskdrake/removable.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Change type"
-msgstr "Ɯanĝu specon"
+msgid "Kuwait"
+msgstr "Kuvajto"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Search servers"
-msgstr "Serĉu servilojn"
+msgid "Choose the window manager to run:"
+msgstr "Elektu la fenestro-administrilon por lanĉi:"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Domain"
-msgstr "Domajno"
+msgid "sub generation of the cpu"
+msgstr ""
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
-#, c-format
-msgid "Username"
-msgstr "Uzulnomo"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "First Time Wizard"
+msgstr "Bonvenon al Unuafoja Sorĉilo"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Please enter your username, password and domain name to access this host."
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
msgstr ""
-"Bonvole tajpu vian uzulnomon, pasvorton kaj domajn-nomon por aliri al tiu "
-"gastiganto."
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Domain Authentication Required"
-msgstr "AĆ­tentikigado de domajno postulata"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Another one"
-msgstr "Iu alia"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Which username"
-msgstr "Kiu salutnomo"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Can't login using username %s (bad password?)"
-msgstr "Ne povas akcepti uzante uzulnomon %s (ĉu malĝusta pasvorto?)"
-
-#: ../../harddrake/data.pm:1
-#, c-format
-msgid "cpu # "
-msgstr "cpu # "
-
-#: ../../harddrake/data.pm:1
-#, c-format
-msgid "SMBus controllers"
-msgstr "SMBus-kontroliloj"
+"Eraro okazis, sed mi ne scias kiel trakti ĝin bone.\n"
+"DaĆ­ri je via propra risko."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "USB controllers"
-msgstr "USB-kontroliloj"
+msgid "please wait, parsing file: %s"
+msgstr "bonvole atendu, mi vortanalizas la dosieron: %s"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "SCSI controllers"
-msgstr "SCSI-kontroliloj"
+msgid "Taiwan"
+msgstr "Tajvano"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Firewire controllers"
-msgstr "Firewire-kontroliloj"
+msgid "Pakistan"
+msgstr "Pakistano"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "(E)IDE/ATA-kontroliloj"
+msgid ""
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
+msgstr ""
-#: ../../harddrake/data.pm:1
-#, c-format
-msgid "Joystick"
-msgstr "Ludbastono"
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Permissions"
+msgstr "Versio: %s\n"
-#: ../../harddrake/data.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Scanner"
-msgstr "skanilo"
+msgid "Provider name (ex provider.net)"
+msgstr "Nomo de interretprovizanto (ekz-e provizanto.net)"
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Unknown/Others"
-msgstr "Nekonata/Aliaj"
+msgid "Version: %s\n"
+msgstr "Versio: %s\n"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Bridges and system controllers"
-msgstr "Pont- kaj sistem-kontroliloj"
+msgid ""
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
+msgstr ""
+"Via sistemo havas malmulte da risurcoj. Eble vi havos problemojn pri\n"
+"instali Linuks-Mandrejkon. Se tio okazos, vi povos anstataĆ­ provi tekstan\n"
+"instaladon. Por ĉi tio, premu `F1' kiam vi startas de KDROM, kaj sekve\n"
+"tajpu `text'."
-#: ../../harddrake/data.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Modem"
-msgstr "Modemo"
+msgid "Use the Windows partition for loopback"
+msgstr "Uzu la Vindoza subdiskon por retrokonektado"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Ethernetcard"
-msgstr "Ethernet-karto"
+msgid "Armenian (typewriter)"
+msgstr "Armena (skribmaƝina)"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Processors"
-msgstr "Procesiloj"
+msgid "Connection type: "
+msgstr "Speco de konekto"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Webcam"
-msgstr "Webcam"
-
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Soundcard"
-msgstr "Sonkarto"
+msgid "Graphical interface"
+msgstr "Grafika interfaco"
-#: ../../harddrake/data.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Other MultiMedia devices"
-msgstr "Alia bildson-aparatoj"
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s kun 3D aparata akcelado"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Tvcard"
-msgstr "Tvcard"
+msgid "India"
+msgstr "Hindio"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Videocard"
-msgstr "Videocard"
+msgid "Chad"
+msgstr "Ĉado"
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Tape"
-msgstr "Bendo"
+msgid "Slovakia"
+msgstr "Slovakujo"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
+msgid "Singapore"
+msgstr "Singapuro"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "CD/DVD burners"
-msgstr "KD/DVD-skribiloj"
+msgid "Cambodia"
+msgstr "Kamboĝo"
-#: ../../harddrake/data.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "CDROM"
-msgstr "KDROMO"
+msgid "Monitor HorizSync: %s\n"
+msgstr "Ekrana horizontala sinkronrapido (horizontal sync rate): %s\n"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Disk"
-msgstr "Disko"
+msgid "Path"
+msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Zip"
-msgstr "Zip"
+msgid ""
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
+msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Floppy"
-msgstr "Disketo"
+msgid ""
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
+msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Let me pick any driver"
-msgstr "Lasu min kapti ajnan pelilon"
+msgid ""
+"Printer %s\n"
+"What do you want to modify on this printer?"
+msgstr ""
+"Presilo %s\n"
+"Kion vi deziras modifi pri tiu presilo?"
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Driver:"
-msgstr "Pelilo:"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Add host"
+msgstr "Aldonu uzanto"
#: ../../harddrake/sound.pm:1
#, c-format
@@ -8016,140 +8062,98 @@ msgstr ""
"\n"
"La nuna pelilo por via \"%s\"-sonkarto estas \"%s\"."
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr ""
-
-#: ../../harddrake/sound.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+"\"Custom\" permit a per-user granularity.\n"
msgstr ""
+"Ĉu vi Ɲatus permesi al uzuloj kundividi iujn el siaj dosierujoj?\n"
+"Permesi tion ebligos al uzuloj simple klaki sur \"Share\" respektive "
+"\"Kundividu\"\n"
+"en Konkeranto kaj nautilus.\n"
+"\n"
+"\"Custum\" ebligas per-uzulan.\n"
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Sound trouble shooting"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
msgstr ""
+"Bonvole elektu Ɲargu aĆ­ konservu pakaÄ”-elekton sur disketo.\n"
+"La formato estas la sama kiel disketoj generitaj per auto_install."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "Eraro: La \"%s\"-pelilo por via sonkarto ne estas listigita"
+msgid "China (broadcast)"
+msgstr ""
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Unkown driver"
-msgstr "Nekonata pelilo"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use quota for backup files."
+msgstr "Malbona rezerva dosiero"
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "Ne ekzistas konata pelilo por via sonkarto (%s)"
+msgid "Configuring printer \"%s\"..."
+msgstr "Mi konfiguras printilon \"%s\"..."
-#: ../../harddrake/sound.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "No known driver"
-msgstr "Nenia konata pelilo"
+msgid "Internet connection"
+msgstr "Interreta konekto"
-#: ../../harddrake/sound.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
msgstr ""
-"Ne ekzistas libera pelilo por via sonkarto (%s), sed ekzistas proprieta "
-"pelilo ĉe \"%s\"."
+"Ɯargado de modulo %s malsukcesis.\n"
+"Ĉu vi deziras trovi denove kun aliaj parametroj?"
-#: ../../harddrake/sound.pm:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "No open source driver"
-msgstr "Nenia liberfonta pelilo"
+msgid "Welcome to the Open Source world."
+msgstr ""
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Bonvole atendu... Mi aplikas la konfiguraĔon"
+msgid "Bosnia and Herzegovina"
+msgstr "Bosnio-Hercegovino"
-#: ../../harddrake/sound.pm:1
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
-msgstr ""
-
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Trouble shooting"
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
msgstr ""
+"Vi bezonas veran dosiersistemon (ext2, reiserfs, xfs aĆ­ jfs) por tiu "
+"surmetingo\n"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
-msgstr ""
-"OSS (Open Sound System - Libera Sonsistemo) estis la nuna son-API. Ĝi estas "
-"son-API "
+msgid "You must enter a host name or an IP address.\n"
+msgstr "Bonvole, provu la muson"
-#: ../../harddrake/sound.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
-msgstr ""
-"\n"
-"\n"
-"Via karto nun uzas la %s\"%s\"-pelilon (defaĆ­lta plelilo por via karto estas "
-"\"%s\")"
+msgid "Netherlands"
+msgstr "Nederlando"
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "Konservu en dosiero"
-#: ../../harddrake/sound.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Sound configuration"
-msgstr "Son-konfigurado"
+msgid "Internal ISDN card"
+msgstr "Interna ISDN-karto"
#: ../../harddrake/sound.pm:1
#, c-format
@@ -8158,1619 +8162,1550 @@ msgid ""
"currently uses \"%s\""
msgstr ""
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "No alternative driver"
-msgstr ""
-
-#: ../../harddrake/v4l.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "enable radio support"
-msgstr ""
+msgid "Title"
+msgstr "Titolo"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Radio support:"
+msgid "Install & convert Fonts"
msgstr ""
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "PLL setting:"
-msgstr "PLL-konfiguraĔo:"
-
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "number of capture buffers for mmap'ed capture"
+msgid "WARNING"
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Number of capture buffers:"
-msgstr ""
+msgid "Installing bootloader"
+msgstr "Instalas start-Ɲargilon"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Tuner type:"
-msgstr "Ɯanĝu subdiskspecon"
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Card model:"
-msgstr "Model de la karto:"
+msgid "replay"
+msgstr "Reludu"
-#: ../../harddrake/v4l.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
+msgid "detected %s"
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unknown|Generic"
-msgstr "Nekonata|Genera"
+msgid "Virgin Islands (U.S.)"
+msgstr "Insuloj Virgaj (Usonaj)"
-#: ../../harddrake/v4l.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr ""
+msgid "Bad backup file"
+msgstr "Malbona rezerva dosiero"
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid ""
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
+"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Auto-detect"
-msgstr "Memdetekta"
-
-#: ../../interactive/newt.pm:1
-#, c-format
-msgid "Do"
-msgstr "Faru"
-
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Via elektaĔo? (defaƭlo estas %s) "
-
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Malbona elektaĔo, provu denove\n"
-
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Re-submit"
+msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
+msgid "Pipe into command"
msgstr ""
-#: ../../interactive/stdio.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
msgstr ""
+"Iuj aparatoj sur via komputilo bezonas \"proprietajn\" pelilojn por "
+"funkcii.\n"
+"Vi povas trovi iun informon pri ili ĉe: %s"
-#: ../../interactive/stdio.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Via elekto? (defaĆ­lto '%s'%s) "
+msgid "Detecting devices..."
+msgstr "Detektas aparatojn..."
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid " enter `void' for void entry"
+msgid "Click here to launch the wizard ->"
msgstr ""
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "Do you want to click on this button?"
-msgstr "Ĉu vi deziras alklaki tiun butonon?"
-
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Butono '%s': %s"
-
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Via elekto? (0/1, defaĆ­lo '%s') "
+msgid "Haiti"
+msgstr "Haitio"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Entries you'll have to fill:\n"
-"%s"
+"Description of the fields:\n"
+"\n"
msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
+msgid "the name of the CPU"
msgstr ""
-"Ɯargado de modulo %s malsukcesis.\n"
-"Ĉu vi deziras trovi denove kun aliaj parametroj?"
-
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Specify options"
-msgstr "Specifu opciojn"
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Autoprobe"
-msgstr "AĆ­tomate esploru"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Refreshing printer data..."
+msgstr "Legas datumbason de CUPS peliloj..."
-#: ../../modules/interactive.pm:1
+#: ../../install2.pm:1
#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
+msgid "You must also format %s"
msgstr ""
-"Iuokaze, la %s pelilo bezonas havi aldonan informon por ĝuste funkcii,\n"
-"kvankam ĝi normale funkcias bone sen la informo. Ĉu vi deziras specifi\n"
-"aldonajn opciojn por ĝi aƭ permesi al la pelilo esplori vian komputilon\n"
-"por la informo ĝi bezonas? Kelkfoje, esplori svenas komputilon, sed\n"
-"ĝi ne devus kaƭzi difekton."
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Kiun %s pelilon devus mi provi?"
+msgid "Be careful: this operation is dangerous."
+msgstr "Zorgu: ĉi tiu operacio estas danĝera."
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Module options:"
-msgstr "Modulaj opcioj:"
+msgid "Insert a floppy containing package selection"
+msgstr "EnƝovu disketon kun pakaÄ”-selekto en drajvo"
-#: ../../modules/interactive.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Nun vi povas provizi ĝiajn opciojn al modulo %s.\n"
-"Opcioj estas en la formo ``nomo=valoro nomo2=valoro2 ...''.\n"
-"Ekzemple, ``io=0x300 irq=7''"
+msgid "Server: "
+msgstr "Servilo:"
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Security Alerts:"
+msgstr "Elektas sekurnivelon"
-#: ../../modules/interactive.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "(module %s)"
-msgstr "(modulo %s)"
+msgid "Sweden"
+msgstr "Svedio"
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instalas pelilon por %s karto %s"
+msgid "Use Expect for SSH"
+msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "See hardware info"
-msgstr "Vidu hardvaran informon"
+msgid "Poland"
+msgstr "Pollando"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Ĉu vi havas iun %s interfacon?"
+msgid "Importance: %s\n"
+msgstr "Graveco: %s\n"
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Do you have another one?"
-msgstr "Ĉu vi havas alian?"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to eject your tape after the backup."
+msgstr "Bonvole, elektu la pakaĔojn kiujn vi deziras instali."
-#: ../../modules/interactive.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Trovis %s %s interfacojn"
+msgid "Other ports"
+msgstr "Aliaj pordoj"
-#: ../../modules/interactive.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "You can configure each parameter of the module here."
+msgid "number of capture buffers for mmap'ed capture"
msgstr ""
-#: ../../modules/parameters.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "comma separated strings"
-msgstr "eroj disigitaj per komo"
+msgid "SMBus controllers"
+msgstr "SMBus-kontroliloj"
-#: ../../modules/parameters.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Connection timeout (in sec)"
+msgstr "Speco de konekto"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "comma separated numbers"
+msgid ""
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
msgstr ""
-#: ../../modules/parameters.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "%d comma separated strings"
-msgstr ""
+msgid "Croatian"
+msgstr "Kroata"
-#: ../../modules/parameters.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Use existing partition"
+msgstr "Uzu ekzistantajn subdiskojn"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "%d comma separated numbers"
-msgstr ""
+msgid "Unable to contact mirror %s"
+msgstr "Ne povis kontakti spegulon %s"
-#: ../../modules/parameters.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "a number"
-msgstr "numero"
+msgid "/Help/_About..."
+msgstr "/Helpo/_Pri..."
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
+msgid "Remove user directories before restore."
msgstr ""
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
msgstr ""
-"La plej ofte uzata maniero por konekti per ADSL estas pppoe.\n"
-"Kelkaj konektoj uzas pptp, malmultaj uzas dhcp.\n"
-"Se vi ne scias, elektu 'uzu pppoe'"
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
-#, c-format
-msgid "Connect to the Internet"
-msgstr "Konektu al la Interreto"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "CUPS printer configuration"
+msgstr "Interreta Konfigurado"
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Sagem (using pppoa) usb"
+msgid "could not find any font in your mounted partitions"
msgstr ""
-#: ../../network/adsl.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Alcatel speedtouch usb"
+msgid "F00f bug"
msgstr ""
-#: ../../network/adsl.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "use dhcp"
-msgstr "uzu dhcp"
+msgid "XFree %s"
+msgstr "XFree %s"
-#: ../../network/adsl.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "use pptp"
-msgstr "uzu pptp"
+msgid ""
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
+msgstr ""
+"Kiun dhcp-an klienton vi deziras uzi?\n"
+"La defaĆ­lto estas dhcp-client"
-#: ../../network/adsl.pm:1
-#, c-format
-msgid "use pppoe"
-msgstr "uzu pppoe"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Domain Name:"
+msgstr "Domajna nomo"
-#: ../../network/drakfirewall.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Other ports"
-msgstr "Aliaj pordoj"
+msgid "On Floppy"
+msgstr "Sur disketo"
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "Everything (no firewall)"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore"
+msgstr "RestaĆ­ru de dosiero"
-#: ../../network/drakfirewall.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
+msgid "if set to yes, check if the network devices are in promiscuous mode."
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
-msgstr ""
+msgid "Looking for available packages..."
+msgstr "Serĉas haveblajn pakaÄ”ojn"
-#: ../../network/drakfirewall.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
+msgid "Init Message"
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
+msgid "Rescue partition table"
+msgstr "Sava subdiskotabelo"
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connection complete."
+msgstr "Speco de konekto"
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No network card"
-msgstr "neniu retkarto"
+msgid "Cyprus"
+msgstr "Kipro"
-#: ../../network/drakfirewall.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "POP and IMAP Server"
-msgstr "Serviloj POP kaj IMAP"
+msgid "Remove from RAID"
+msgstr "Forigu de RAID (Redundanca Aro de Malmultekostaj Diskoj)"
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "Mail Server"
-msgstr "RetpoƝt-servilo"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "This encryption key is too simple (must be at least %d characters long)"
+msgstr ""
+"Ĉi tiu pasvorto ests tro simpla (ĝi devas esti almenaƭ %d signoj longa)"
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "Domain Name Server"
-msgstr "Domajn-nom-servilo"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Configuration Wizards"
+msgstr "ISDN-a KonfiguraĔon"
-#: ../../network/drakfirewall.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Web Server"
-msgstr "Interret-servilo"
+msgid "ISDN connection"
+msgstr "ISDN-konekto"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Zeroconf host name must not contain a ."
+msgid "primary"
msgstr ""
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Host name"
-msgstr "PoƝtejo"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr ""
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Zeroconf Host name"
-msgstr "PoƝtejo"
-
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
msgid ""
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
msgstr ""
+"Tiu ĉi dialogo uzeblas por elekti kiujn servojn vi deziras startigi kiam vi "
+"startigas\n"
+"vian komputilon.\n"
+"DrakX listigos ĉiujn servojn atingeblajn en la nuna instalaÄ”o.\n"
+"Kontrolu ĉiujn zorge kaj malelektu tiujn kiuj ne estas ĉiam bezonataj\n"
+"dum la starto.\n"
+"Kiam via muso estas supre de ero, malgranda balono\n"
+"ekaperas por helpi vin. Ĝi priskribas la rolon de la servo.\n"
+"Tamen, se vi ne certas ĉu iu servo utilas aƭ ne, prefere lasu la defaƭltan "
+"sintenon.\n"
+"\n"
+"!!Zorgegu en ĉi tiu paƝo se vi intencas uzi vian komputilon kiel servilo:\n"
+"ne startu servojn kiujn vi ne bezonas. Memoru ke certaj servoj povas esti\n"
+"danĝeraj se ili estas aktivigitaj en servilo. Ĝenerale,\n"
+"elektu nur tiujn servojn kiujn vi vere bezonas.\n"
+"!!"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configuring network"
-msgstr "Konfiguras reto"
+msgid "Skip"
+msgstr "Ellasu"
-#: ../../network/ethernet.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
+msgid "Niue"
msgstr ""
-"Bonvole elektu kiun retadaptilon vi deziras uzi por konekti al la interreto"
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
-#, c-format
-msgid "Choose the network interface"
-msgstr "Elektu la retan interfacon"
-
-#: ../../network/ethernet.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
msgstr ""
-"Mi ne detektas eterretan retadaptilom sur via sistemo.\n"
-"Mi ne povas konfiguri tiun konektotipon."
+"Ɯaltas/MalƝaltas ĉiujn retajn interfacojn konfiguratajn por lanĉi\n"
+"dum sistemstartado."
-#: ../../network/ethernet.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
msgstr ""
-"Kiun dhcp-an klienton vi deziras uzi?\n"
-"La defaĆ­lto estas dhcp-client"
-#: ../../network/isdn.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Neniu ISDN-a PCI-a karto trovata. Bonvole elektu unu el la PCI-aj kartojn "
-"sur\n"
-"la sekvanta ekrano."
+msgid "important"
+msgstr "grava(j)"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
+msgid "Total Progress"
msgstr ""
-"Mi detektis ISDN-an PCI-an Karton, sed mi ne scias la specon. Bonvole "
-"elektu\n"
-"unu el la PCI-aj kartojn sur la sekvanta ekrano."
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Kiu el la sekvaj estas via ISDN-karto?"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "ISDN Configuration"
-msgstr "ISDN-a KonfiguraĔon"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Abort"
-msgstr "Ĉesigu"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Continue"
-msgstr "Ĉu mi devus daƭri?"
-
-#: ../../network/isdn.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
+"\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
msgstr ""
+"DrakX unue detektos iujn IDE-aparatojn en via komputilo. Ĝi ankaƭ\n"
+"serĉas unu aƭ plurajn PCI-SCSI-kartojn en via sistemo. Se SCSI-karto\n"
+"estas trovita, DrakX aĆ­tomate instalos la taĆ­gan pelilon.\n"
"\n"
-"Se via havas ISA-an karton, la valoro sur la sekvanta ekrano devus esti "
-"ĝusta.\n"
+"Ĉar detektado de aparataro ne estas absolute senerara, DrakX povas\n"
+"malsukcesi detektante viajn fiksdiskojn. Se tiel, vi devos mem mane entajpi\n"
+"vian aparataron.\n"
"\n"
-"Se vi havas PCMCIA-an karton, vi bezonas scii la IRQ-o kaj I/O (Eneligo)\n"
-"por via karto.\n"
+"Se vi devis mane entajpi vian PCI-SCSI-adaptilon, DrakX demandos ĉu vi\n"
+"deziras konfiguri opciojn por ĝi. Prefere permesu al DrakX provi la "
+"aparatojn\n"
+"por la kartospecifaj opcioj kiuj estas bezonataj por inici la adaptilon. "
+"Plej ofte,\n"
+"DrakX trairos tiun paƝon sen ajna problemo.\n"
+"\n"
+"Se DrakX ne kapablas provi kiujn parametrojn la opcioj aĆ­tomate devas doni "
+"al la\n"
+"aparatoj, vi devos mane konfiguri la pelilon."
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "I don't know"
-msgstr "Mi ne scias"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Users"
+msgstr "Salutnomo"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "PCI"
-msgstr "PCI"
+msgid "Aruba"
+msgstr "Arubo"
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "Preparing bootloader..."
+msgstr "Preparas startƝargilon"
-#: ../../network/isdn.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "What kind of card do you have?"
-msgstr "Kiun specon de karto vi havas?"
+msgid "Gateway (e.g. %s)"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr ""
+msgid "The passwords do not match"
+msgstr "La pasvortoj ne egalas"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Kiun protokolon vi deziras uzi?"
+msgid "Examples for correct IPs:\n"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Protokolo por la cetera mondo"
+msgid "Frequency (MHz)"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
msgstr ""
-"Protokolo por la cetera mondo \n"
-"Neniom da D-Kanelo (lukontraktataj lineoj)"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "European protocol"
-msgstr "EĆ­ropa protokolo"
+msgid "the number of the processor"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "EĆ­ropa protokolo (EDSS1)"
+msgid "Hardware clock set to GMT"
+msgstr "Aparata horloĝo estas ĝustigita laƭ GMT"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
-msgstr ""
-"Elektu vian interretprovizanton.\n"
-" Se ĝin ne estas en la listo, elektu Nelistiĝitan"
+msgid "Give a file name"
+msgstr "Donu dosiernomon"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Please choose the port that your printer is connected to."
+msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"
+
+#: ../../standalone/livedrake:1
#, c-format
-msgid "External ISDN modem"
-msgstr "Eksterna ISDN-modemo"
+msgid "Change Cd-Rom"
+msgstr "Ɯanĝu KD-ROM-on"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internal ISDN card"
-msgstr "Interna ISDN-karto"
+msgid "Paraguay"
+msgstr "Paragvajo"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "Kia estas via ISDN-a konektaĔo?"
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
+msgstr ""
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Network Configuration Wizard"
-msgstr "Sorĉilo por ret-konfigurado"
+msgid "There's no known driver for your sound card (%s)"
+msgstr "Ne ekzistas konata pelilo por via sonkarto (%s)"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "Malnova konfigraĔo (isdn4net)"
+msgid "force"
+msgstr "devigu"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "New configuration (isdn-light)"
-msgstr "Nova konfiguraĔo (isdn-light)"
+msgid "Exit"
+msgstr "Eliro"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
msgstr ""
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Do nothing"
-msgstr "Faru nenion"
-
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Install rpm"
-msgstr "Instalu rpm"
-
-#: ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
msgstr ""
-#: ../../network/modem.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Title"
-msgstr "Titolo"
+msgid "Estonian"
+msgstr "Estona"
-#: ../../network/modem.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""
+"Apache estas Tut-Tera TeksaÄ”a servilo. Ĝi liveras HTML-ajn dosierojn\n"
+"kaj CGI (komunakluza interfaco)."
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Du DNS-a Servilo (nedeviga)"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Unu DNS-a Servilo (nedeviga)"
+msgid "Add/Del Clients"
+msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Domain name"
-msgstr "Domajna nomo"
+msgid "Choose the network interface"
+msgstr "Elektu la retan interfacon"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "CHAP"
+msgid "Unknown Model"
msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Script-based"
-msgstr "Programeto-bazata"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Terminal-based"
-msgstr "Finaparato-bazata"
+msgid "CD/DVD burners"
+msgstr "KD/DVD-skribiloj"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "PAP"
-msgstr "PAP (Pasvorta AĆ­tentikigada Protokolo)"
+msgid ""
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"Subdisko startata defaĆ­lte\n"
+" (por MS-DOS starto, ne por \"lilo\")\n"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Login ID"
-msgstr "Salutnomo"
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "choose image"
+msgstr "Elektu agon"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Phone number"
-msgstr "Telefonnumero"
+msgid "Firewalling configuration detected!"
+msgstr "KonfiguraĔo de barilo detektata!"
#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Connection name"
msgstr "Nomo de konekto"
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Dialup options"
-msgstr "Telefon-konektaj opcioj"
-
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"
-
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "Network Configuration"
-msgstr "Reta KonfiguraĔo"
-
-#: ../../network/netconnect.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
+"x coordinate of text box\n"
+"in number of characters"
msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
+msgid "Updating package selection"
+msgstr "Ĝisdatigo de pakaÄ”-elekto"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "Kie vi deziras kroĉi retrokonektan dosieron %s?"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Problemo okazis dum restarto de la reto: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
msgstr ""
-"La reto devas esti restartigita.\n"
-"Ĉu vi deziras restartigi ĝin?"
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Network configuration"
-msgstr "Reta KonfiguraĔo"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Ĉu vi deziras starti vian konektaĔon je startado de la sistemo?"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Internet connection"
-msgstr "Interreta konekto"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the number of buttons the mouse has"
+msgstr "2 butonoj"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Elektu la konekton kiun vi deziras konfiguri"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "ethernet card(s) detected"
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
msgstr ""
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "LAN connection"
-msgstr "LAN KonfiguraĔo"
-
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "cable connection detected"
-msgstr "kabla konektaĔon detektita"
+msgid "Replay"
+msgstr "Reludu"
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Cable connection"
-msgstr "Kabla konekto"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup other files"
+msgstr "Malbona rezerva dosiero"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "detected"
-msgstr "detektita"
+msgid "No floppy drive available"
+msgstr "Neniu disketilo havebla"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "ADSL connection"
-msgstr "ADSL-konekto"
+msgid "Backup files are corrupted"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "detected %s"
+msgid "TV norm:"
msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "ISDN connection"
-msgstr "ISDN-konekto"
+msgid "Cpuid family"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Winmodem connection"
-msgstr "Winmodem-konekto"
+msgid "32 MB"
+msgstr "32 MB"
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "detected on port %s"
-msgstr "detektita en pordo %s"
+msgid "Lithuanian AZERTY (new)"
+msgstr "Litova AZERTY-a (nova)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Normal modem connection"
-msgstr "Normala modemo-konekto"
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgstr ""
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Detecting devices..."
-msgstr "Detektas aparatojn..."
+msgid ""
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
+msgstr ""
+"Vi elektis softvaran RAID-an subdiskon por la radika dosiersistemo (/).\n"
+"Neniu startƝargilo povas trakti tion sen /boot subdisko.\n"
+"Bonvole zorgu aldoni /boot subdiskon."
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#, c-format
-msgid "Expert Mode"
-msgstr "Spertuloreĝimo"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Previous"
+msgstr "<- AntaĆ­a"
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Use auto detection"
-msgstr ""
+msgid "Other OS (MacOS...)"
+msgstr "Alia Mastruma Sistemo (MacOS...)"
-#: ../../network/netconnect.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Choose the profile to configure"
-msgstr "Elektu la konfigurendan profilon"
+msgid "To activate the mouse,"
+msgstr "Por aktivigi la muson,"
-#: ../../network/netconnect.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
+msgid "Bringing up the network"
+msgstr "Startado de la reto"
-#: ../../network/netconnect.pm:1
+#: ../../common.pm:1
#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
+msgid "Screenshots will be available after install in %s"
+msgstr "Ekranfotoj haveblos post instalado en %s"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
"\n"
-"Press OK to continue."
-msgstr ""
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
-"Ni konfiguros nun l %s konekton.\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
-"Premu JES por daĆ­rigi."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Ni konfiguros nun la %s-konekton."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Internet connection & configuration"
-msgstr "Interreta konektaĔo kaj konfiguro"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Configure the connection"
-msgstr "Konfiguru la konekton"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Disconnect"
-msgstr "Malkonektu"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Connect"
-msgstr "Konektu"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid ""
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
"\n"
-"You can reconfigure your connection."
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
msgstr ""
-"\n"
-"Vi povas rekonfiguri vian konekton."
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
+msgid "Tanzania"
msgstr ""
-"\n"
-"Vi povas konekti al interreto aĆ­ rekonfiguri vian konekton."
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "Vi estas nun ne konektita kun interreto."
+msgid "Computing FAT filesystem bounds"
+msgstr "Kalkulas FAT dosiersistemajn limojn"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
-"You can disconnect or reconfigure your connection."
+"Backup Sources: \n"
msgstr ""
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "You are currently connected to the Internet."
-msgstr "Vi estas nun konektita al Interreto."
-
-#: ../../network/network.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "URL devas komenci per 'ftp:' aĆ­ 'http:'"
+msgid "Content of the file"
+msgstr "Enhavoj de la dosiero"
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Proxy should be http://..."
-msgstr "Prokura servilo devus esti http://..."
+msgid "Authentication LDAP"
+msgstr "AĆ­tentikiga LDAP"
-#: ../../network/network.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "FTP proxy"
-msgstr "FTP prokura servilo"
+msgid "Let me pick any driver"
+msgstr "Lasu min kapti ajnan pelilon"
-#: ../../network/network.pm:1
-#, c-format
-msgid "HTTP proxy"
-msgstr "HTTP prokura servilo"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Profile "
+msgstr "muntado malsukcesis: "
-#: ../../network/network.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Proxies configuration"
-msgstr "Konfigurado de prokuraj serviloj"
-
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "IP-adreso devus esti en la notacio 1.2.3.4"
+msgid "transmitted"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "DNS-servila adreso devas esti en formato 1.2.3.4"
+msgid "Palestine"
+msgstr "Palestino"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Gateway device"
-msgstr "Prokura kluzaparato"
+msgid "RAID md%s\n"
+msgstr "RAID (Redundanca Aro de Malmultekostaj Diskoj) md%s\n"
-#: ../../network/network.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Gateway (e.g. %s)"
+msgid "%d comma separated strings"
msgstr ""
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "DNS server"
-msgstr "DNA servilo"
+msgid "Here is the full list of keyboards available"
+msgstr "Jen la kompleta listo de haveblaj klavaroj"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "Theme name"
+msgstr "Opuza nomo"
+
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
-msgstr ""
-"Bonvole enigu vian poƝtejon.\n"
-"Via poƝtejo devus esti plene specifita poƝtejo,\n"
-"ekzemple ``miakomputilo.mialaborejo.miafirmao.com''.\n"
-"Vi ankaĆ­ povas enigi la IP-adreson de la prokura kluzo se via havas unu."
+msgid "/_Help"
+msgstr "/_Helpo"
-#: ../../network/network.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
msgstr ""
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
+msgid "the width of the progress bar"
msgstr ""
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP-adreso devus esti en la notacio 1.2.3.4"
+msgid "Cook Islands"
+msgstr "Kuk-Insularo"
-#: ../../network/network.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Start at boot"
-msgstr "Startu ĉe starto"
-
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Bonvole, provu la muson"
+msgid "Formatting partition %s"
+msgstr "Formatas subdiskon %s"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Network Hotplugging"
-msgstr "Reta KonfiguraĔo"
+msgid "Hostname required"
+msgstr "PoƝtejo: "
-#: ../../network/network.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Track network card id (useful for laptops)"
+msgid "Unselect fonts installed"
msgstr ""
-#: ../../network/network.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Cancel"
+msgstr "Nuligu"
+
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "DHCP host name"
-msgstr "PoƝtejo"
+msgid "Searching for configured scanners ..."
+msgstr "Loka printilo"
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Netmask"
-msgstr "Retmasko"
+msgid "Wheel"
+msgstr "Rado"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "IP address"
-msgstr "IP-adreso"
+msgid "Videocard"
+msgstr "Videocard"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp/zeroconf)"
+msgid "\tBackups use tar and bzip2\n"
+msgstr ""
-#: ../../network/network.pm:1
-#, c-format
-msgid "Automatic IP"
-msgstr "AĆ­tomata IP"
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Remove Selected"
+msgstr "Malinstalu printvicon"
-#: ../../network/network.pm:1
-#, c-format
-msgid " (driver %s)"
-msgstr " (pelilo: %s)"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _modems"
+msgstr "Malproksima printilo"
-#: ../../network/network.pm:1
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfiguras retan aparaton %s"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove printer"
+msgstr "Malproksima printilo"
-#: ../../network/network.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
msgstr ""
-"Bonvole enigu la IP-an konfigurñjon por ĉi tiu komputilo.\n"
-"Ĉiu ero devus esti enigata kiel IP-adreson en punktita-decimala notacio\n"
-"(ekzemple, 1.2.3.4)."
+"AVERTO!\n"
+"\n"
+"DrakX nun regrandecigos vian Vindozan subdiskon. Zorgu:\n"
+"ĉi tiu operacio estas danĝera. Se vi ne jam faris ĝin,\n"
+"vi prefere antaĆ­e eliru el la instalado, uzu\n"
+"\"scandisk\" sub Vindozo (kaj laƭvole rulu \"defrag\"), kaj sekve relanĉu "
+"la\n"
+"instaladon. Vi prefere faru ankaĆ­ rezervan kopion de via datenoj.\n"
+"Kiam vi estos certa, klaku \"Jeso\"."
-#: ../../network/network.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
+msgid "Which services would you like to allow the Internet to connect to?"
msgstr ""
-"AVERTO: Ĉi tiu aparato estis antaƭe konfigurita por konekti al la "
-"Interreto.\n"
-"Simple akceptu konservi la konfiguron de ĉi tiu aparato.\n"
-"Se vi modifos la subajn kampojn, vi Ɲanĝos ĉi tiun konfiguron."
-#: ../../network/shorewall.pm:1
+#: ../../standalone/logdrake:1
#, c-format
msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
msgstr ""
-"Averto. Ekzistanta konfiguraĔo de barilo detektata. Vi eble devas permane\n"
-"fiksi ĝin poste de la instalado."
-#: ../../network/shorewall.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "KonfiguraĔo de barilo detektata!"
+msgid "Other"
+msgstr "Alia"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
-msgid "Account Password"
-msgstr "Konta Pasvorto"
+msgid "Default"
+msgstr "DefaĆ­lta"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Account Login (user name)"
-msgstr "Konta Salutnomo (uzula nomo)"
+msgid "Button 2 Emulation"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "type1inst building"
+msgstr ""
+
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Speco de konekto"
+msgid "Abiword"
+msgstr "Ĉesigu"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "choose image file"
+msgstr "Elektu agon"
+
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Connection speed"
-msgstr "Rapido de konekto"
+msgid "X server"
+msgstr "X servilo"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Dialing mode"
-msgstr "Diskuma modalo"
+msgid "Domain Admin User Name"
+msgstr "Uzulnomo de la Domajna administranto"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "There was an error while scanning for TV channels"
+msgstr "Estis eraro dum instalado de pakaĔoj:"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "Choose your country"
-msgstr "Elektu vian landon"
+msgid "US keyboard (international)"
+msgstr "Usona klavaro (internacia)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Not installed"
+msgstr "Eliru instalprogramon"
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "Provizanto DNS 2 (nedeviga)"
+msgid "LAN connection"
+msgstr "LAN KonfiguraĔo"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "Provizanto DNS 1 (nedeviga)"
+msgid "/File/-"
+msgstr "/Dosiero/-"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Provider phone number"
-msgstr "Telefonnumero de interretprovizanto"
+msgid "Italian"
+msgstr "Itala"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Nomo de interretprovizanto (ekz-e provizanto.net)"
+msgid "Basic"
+msgstr "Baza"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Your personal phone number"
-msgstr "Via persona telefonnumero"
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Card IO_1"
-msgstr "I/O 1 (Eneligo 1) de Karto"
+msgid "Honduras"
+msgstr "Honduro"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "Card IO_0"
-msgstr "I/O 0 (Eneligo 0) de Karto"
+msgid "pdq"
+msgstr ""
#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Card IO"
msgstr "I/O (Eneligo) de Karto"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Card mem (DMA)"
-msgstr "Memoro de Karto (DMA)"
-
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Card IRQ"
-msgstr "IRQ de Karto"
+msgid "when checked, owner and group won't be changed"
+msgstr ""
-#: ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please fill or check the field below"
-msgstr "Bonvole plenigu aĆ­ marku la suban kampon"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
+msgstr ""
-#: ../../network/tools.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Connection Configuration"
-msgstr "Konfigurado de Konekto"
-
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
-msgstr "Konektu al la Interreto / Konfiguru lokan Reton"
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
+msgstr ""
-#: ../../network/tools.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "For security reasons, it will be disconnected now."
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
msgstr ""
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "La sistemo estas nun konektita al Interreto."
+msgid "\t-Network by FTP.\n"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Testing your connection..."
-msgstr "Testante vian konektaĔon..."
+msgid "Russian (Yawerty)"
+msgstr "Rusa (Yawerty-a)"
-#: ../../network/tools.pm:1
-#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Ĉu vi deziras provi konekti al la interreto nun?"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "You must enter a device or file name!"
+msgstr "Printila Aparato URI"
-#: ../../network/tools.pm:1
-#, c-format
-msgid "Internet configuration"
-msgstr "Interreta konfigurado"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/_Quit"
+msgstr "Ĉesu"
-#: ../../partition_table/raw.pm:1
+#: ../../network/adsl.pm:1
#, c-format
msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
msgstr ""
-"Io malbona okazas en via drajvo.\n"
-"Testo pri la integreco de datenoj malsukcesis.\n"
-"Tio signifas ke skribado al la disko finiĝos per difektitaj datenoj."
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid " (Default)"
-msgstr " (DefaĆ­lta)"
+msgid "Graphics memory: %s kB\n"
+msgstr "Graifka memoro: %s KB\n"
-#: ../../printer/cups.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Ĉe CUPS-servilo \"%s\""
+msgid ""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+msgstr ""
+"Tiu ĉi programo estas libera softvaro; vi povas redisdoni ĝin kaj/aƭ modifi\n"
+"ĝin sub la termoj de la GNU-Ĝeneralpublika Licenco kiel publikigita de\n"
+"la Libera Programar FondaĔo (Free Software Foundation); aƭ versio 2, aƭ\n"
+"laĆ­ via opcio) pli posta versio.\n"
+"\n"
+"Tiu ĉi programo estas disdonata kun la espero ke ĝi estu utila,\n"
+"sed SEN IA GARANTIO; eĉ sen garantio pri MERKATOTAUXGECO aƭ\n"
+"TAUXGECO POR APARTA CELO. Vidu la\n"
+"GNU Ĝeneralpublikan Licencon pri pli da detaloj.\n"
+"\n"
+"Vi devus esti ricevinta kopion de la GNU Ĝeneralpublika Licenco\n"
+"kun tiu ĉi programo; se ne, skribu al la Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Remote Printers"
-msgstr "Malproksimaj printiloj"
+msgid "access to compilation tools"
+msgstr "aliro al kompililoj"
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
-#, c-format
-msgid "CUPS"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please select data to restore..."
+msgstr "Bonvole, elektu lingvon por uzi."
-#: ../../printer/cups.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "(on this machine)"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
msgstr ""
+"Se vi intencas uzi \"aboot\", zorgu lasi liberan spacon (2048 sektoroj "
+"sufiĉas)\n"
+"ĉe la komenco de la disko"
-#: ../../printer/cups.pm:1
-#, c-format
-msgid "(on %s)"
-msgstr "(sur %s)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Standard test page"
+msgstr "LaĆ­norma"
-#: ../../printer/data.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
+msgid "Create"
+msgstr "Kreu"
-#: ../../printer/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LPRng"
+msgid "What"
msgstr ""
-#: ../../printer/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr ""
+msgid "There was an error ordering packages:"
+msgstr "Estis eraro ordigi pakaĔojn:"
-#: ../../printer/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "LPD"
-msgstr ""
+msgid "Bulgarian (BDS)"
+msgstr "Bulgara (BDS)"
-#: ../../printer/data.pm:1
-#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr ""
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Disable Server"
+msgstr "Datumbazoj"
-#: ../../printer/data.pm:1
-#, c-format
-msgid "PDQ"
-msgstr ""
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Filesystem encryption key"
+msgstr "Speco de dosiersistemo: "
-#: ../../printer/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
+msgid "Gujarati"
+msgstr "gujarata"
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Unknown Model"
+msgid ""
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
msgstr ""
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Unknown model"
-msgstr ""
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "Save theme"
+msgstr "Instalu sistemon"
-#: ../../printer/main.pm:1
-#, c-format
-msgid "%s (Port %s)"
-msgstr "%s (Pordo%s)"
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "group"
+msgstr "Laborgrupo"
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Host %s"
-msgstr "Gastiganto %s"
+msgid "Brazil"
+msgstr "Brazilo"
-#: ../../printer/main.pm:1
-#, c-format
-msgid "Network %s"
-msgstr "Reto %s"
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Auto Install"
+msgstr "Instalu"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "Interface \"%s\""
-msgstr "Interfaco \"%s\""
+msgid "Network Configuration Wizard"
+msgstr "Sorĉilo por ret-konfigurado"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Local network(s)"
-msgstr "Loka(j) reto(j)"
+msgid "Removable media automounting"
+msgstr "Aƭtomata kroĉado de demeteblaj aparatoj"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Raw printer (No driver)"
-msgstr ""
+msgid "Printing"
+msgstr "Presante"
-#: ../../printer/main.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ", using command %s"
-msgstr ""
+msgid "Unkown driver"
+msgstr "Nekonata pelilo"
-#: ../../printer/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
+msgid ""
+"There are no printers found which are directly connected to your machine"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr ""
+msgid "Create a new partition"
+msgstr "Kreu novan subdiskon"
-#: ../../printer/main.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
+msgid "Driver:"
+msgstr "Pelilo:"
-#: ../../printer/main.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
+msgid "unknown"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ", printing to %s"
-msgstr ", presante sur %s"
+msgid "Use fdisk"
+msgstr "Uzu fdisk"
-#: ../../printer/main.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ", multi-function device"
-msgstr ""
+msgid "MOVE YOUR WHEEL!"
+msgstr "MOVU VIAN RADON!"
-#: ../../printer/main.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ", multi-function device on HP JetDirect"
+msgid "sent: "
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ", multi-function device on USB"
-msgstr ""
+msgid "Automatic IP"
+msgstr "AĆ­tomata IP"
-#: ../../printer/main.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ", multi-function device on parallel port \\#%s"
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+" Note that two different options are available after clicking the button:\n"
+"\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ", USB printer"
-msgstr ", USB-printilo"
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ", USB printer \\#%s"
+msgid "Configuration of a remote printer"
msgstr ""
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid " on parallel port \\#%s"
-msgstr ""
+msgid "Moldova"
+msgstr "Moldovio"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Local Printers"
-msgstr "Loka printilo"
+msgid "Please check if you want to erase your tape before the backup."
+msgstr "Bonvole, elektu la pakaĔojn kiujn vi deziras instali."
-#: ../../printer/main.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Pipe job into a command"
+msgid "An online platform to respond to enterprise support needs."
msgstr ""
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Enter a printer device URI"
-msgstr "Printila Aparato URI"
+#: ../../network/network.pm:1
+#, c-format
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "URL devas komenci per 'ftp:' aĆ­ 'http:'"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Printer on NetWare server"
-msgstr "Printservilo"
+msgid "Add a new rule at the end"
+msgstr "Neniu printilo"
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Vindozo 95/98/NT"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
+msgstr ""
-#: ../../printer/main.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Reta Printilo (TCP/ingo)"
+msgid ""
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
+msgstr ""
+"Nun vi povas provizi ĝiajn opciojn al modulo %s.\n"
+"Opcioj estas en la formo ``nomo=valoro nomo2=valoro2 ...''.\n"
+"Ekzemple, ``io=0x300 irq=7''"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer on remote lpd server"
-msgstr "Malproksimaj lpd servilo"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Quit without writing the partition table?"
+msgstr "Ĉu eliru sen skribi la subdisktabelon?"
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Malproksima CUPS-a servilo"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
-#: ../../printer/main.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Remote printer"
-msgstr "Malproksima printilo"
+msgid "Installing packages..."
+msgstr "Instalanta pakaĔojn..."
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Local printer"
-msgstr "Loka printilo"
+msgid "Dutch"
+msgstr "Nederlanda"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Configuring applications..."
-msgstr "Konfiguru Printilon"
+msgid "The following packages need to be installed:\n"
+msgstr "La sekvaj pakaĔoj estos instalataj"
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Angola"
+msgstr "Angolo"
+
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Printerdrake"
-msgstr "Printilo"
+msgid "service setting"
+msgstr "Servilo"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Foriganta presilon \"%s\"..."
+msgid "Custom"
+msgstr "Akomodata"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Ĉu vi vere deziras forigi la presilon \"%s\"?"
+msgid "File is already used by another loopback, choose another one"
+msgstr "Dosiero jam uzata de alia retrokonektado, elektu alian"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove printer"
-msgstr "Malproksima printilo"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Read-only"
+msgstr "Nur-lege"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Learn how to use this printer"
-msgstr "Ĉu vi deziras provi la konfiguraĔon?"
+#: ../../lang.pm:1
+#, c-format
+msgid "Latvia"
+msgstr "Latvio"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Print test pages"
-msgstr "Printas provpaĝo(j)n..."
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "No known driver"
+msgstr "Nenia konata pelilo"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "1 MB"
+msgstr "1 MB"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksound:1
#, c-format
msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Configure Local Area Network..."
+msgstr "Konfiguru lokan reton"
+
+#: ../../services.pm:1
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "Launch the sound system on your machine"
+msgstr "Lanĉu la sonsistemon en via maƝino"
#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Preparing printer database..."
+msgstr "Legas datumbason de CUPS peliloj..."
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Information"
+msgstr "Montru informon"
+
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "No network card"
+msgstr "neniu retkarto"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr ""
+msgid "Which filesystem do you want?"
+msgstr "Kiun dosierosistemo vi deziras uzi?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr ""
+msgid "3 buttons"
+msgstr "3 butonoj"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "Detailed information"
+msgstr "Detala informo"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "Malta"
+msgstr "Malto"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
+msgid ""
+"Printer default settings\n"
+"\n"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Default printer"
-msgstr "Loka printilo"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Set this printer as the default"
+msgid "This floppy is not FAT formatted"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Printer options"
-msgstr "Printilaj opcioj"
+msgid "Configuring network"
+msgstr "Konfiguras reto"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid "Printer manufacturer, model"
-msgstr ""
+msgid "Graphic Card"
+msgstr "Grafik-karto"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr ""
+msgid "Resizing Windows partition"
+msgstr "Kalkulas Vindozajn dosiersistemajn limojn"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Foriganta la malnovan presilon \"%s\"..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer name, description, location"
-msgstr "Printilan Konekton"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer connection type"
-msgstr "Disdividado de Interreta Konekto"
+msgid "Provider dns 1 (optional)"
+msgstr "Provizanto DNS 1 (nedeviga)"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Raw printer"
-msgstr "Neniu printilo"
+#: ../../lang.pm:1
+#, c-format
+msgid "Cameroon"
+msgstr "Kameruno"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Do it!"
+msgid ""
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
msgstr ""
+"Nun vi povas dispartigi %s.\n"
+"Kiam vi finiĝos, ne forgesu savi kun `w'."
#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
@@ -9779,416 +9714,336 @@ msgstr ""
msgid "Close"
msgstr "Malfermu"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
msgstr ""
-"Presilo %s\n"
-"Kion vi deziras modifi pri tiu presilo?"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Modify printer configuration"
-msgstr "Interreta Konfigurado"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Add a new printer"
-msgstr "Neniu printilo"
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Normal Mode"
-msgstr "Normala Modalo"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Change the printing system"
-msgstr "Konfiguru retumon"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "CUPS configuration"
-msgstr "LAN KonfiguraĔo"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
+msgid "Calendar"
+msgstr "Kalendaro"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Display all available remote CUPS printers"
+msgid ""
+"Restore Selected\n"
+"Catalog Entry"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
msgstr ""
-"Jen la sekvantaj printvicoj.\n"
-"Vi povas aldoni pli aƭ Ɲanĝi la ekzistantajn."
+"Por uzi malproksima lpd printvico, vi devas provizi la poƝtejon de la\n"
+"printservilo kaj la printviconomon ĉe tiu servilo en kiun taskoj devus\n"
+"esti metata."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printing system: "
-msgstr ""
+msgid "Iceland"
+msgstr "Islando"
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Checking installed software..."
+msgid "consolehelper missing"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Installing Foomatic..."
-msgstr "Instalanta Foomatic..."
+msgid "stopped"
+msgstr "haltigita"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "Malsukcesis konfiguri la printilon \"%s\"!"
+msgid "Whether the FPU has an irq vector"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+# this entry must not be too long, or the window gets tooooo wiiiiiide
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Mi konfiguras printilon \"%s\"..."
+msgid "Ext2"
+msgstr "Ext2"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Reading printer data..."
-msgstr "Legas datumbason de CUPS peliloj..."
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#, c-format
+msgid "Expand Tree"
+msgstr "Etendu Arbon"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Kiun printsistemo vi deziras uzi?"
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid ""
+"The old \"%s\" driver is blacklisted.\n"
+"\n"
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Select Printer Spooler"
-msgstr "Elektu Printilan Konekton"
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#, c-format
+msgid "Expert Mode"
+msgstr "Spertuloreĝimo"
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Setting Default Printer..."
-msgstr "Loka printilo"
+#, c-format
+msgid "Printer options"
+msgstr "Printilaj opcioj"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Installing %s ..."
-msgstr "Instalanta pakaĔo %s"
+msgid "Local Network adress"
+msgstr "neniu retkarto trovita"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Removing %s ..."
-msgstr "Distingivo: %s\n"
+msgid "Backup your System files. (/etc directory)"
+msgstr "Malbona rezerva dosiero"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
+"Do you want to install the updates ?"
msgstr ""
+"Vi havas nun la eblecon deƝuti ĝisdatigitajn pakaÄ”ojn. Tiuj pakaÄ”oj\n"
+"estas ĝisdatigitaj post eldonado de tiu ĉi eldono. Ili povas\n"
+"enteni sekureco- aĆ­ eraro-riparojn.\n"
+"\n"
+"Por deƝuti tiujn pakaÄ”ojn, vi bezonas funkciantan Interret-\n"
+"konekton.\n"
+"\n"
+"Ĉu vi deziras instali tiujn ĝisdatigojn?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Kiun printsistemo vi deziras uzi?"
+msgid "Samba Server"
+msgstr "NIS Servilo"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Installing a printing system in the %s security level"
+"Enable/Disable IP spoofing protection."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "paranoid"
-msgstr "Paranoja"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "high"
-msgstr "Alta"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Restarting printing system..."
-msgstr "Kiun printsistemo vi deziras uzi?"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Configuration of a remote printer"
+msgid "Australian Optus cable TV"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+msgstr " <Tabo>/<Alt-Tabo> inter eroj | <Spaco> elektas | <F12> sekva ekrano "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
+msgid "Subnet:"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configure the network now"
-msgstr "Konfiguru retumon"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Go on without configuring the network"
-msgstr "Konfiguras reto"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Network functionality not configured"
-msgstr "Ekrano ne estas konfigurata"
+msgid "Zimbabwe"
+msgstr "Zimbabvo"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Starting network..."
-msgstr "Startas vian konektaĔon..."
+msgid "Please enter the host name or IP."
+msgstr "Bonvole, provu la muson"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Refreshing printer data..."
-msgstr "Legas datumbason de CUPS peliloj..."
+msgid "When"
+msgstr "Rado"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Transfer printer configuration"
-msgstr "Interreta Konfigurado"
+msgid "Second DNS Server (optional)"
+msgstr "Du DNS-a Servilo (nedeviga)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Transferring %s..."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "New printer name"
-msgstr "Neniu printilo"
+msgid "Finland"
+msgstr "Finnlando"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
+"Arguments: (arg)\n"
+"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
+msgid "Color depth: %s\n"
+msgstr "Kolorprofuneco: %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Transfer"
-msgstr ""
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "Vi ne povas malelekti ĉi tiun pakaÄ”on. Ĝi devus esti promociata."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Loading from floppy"
+msgstr "Ɯargas de disketo"
+
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
#, c-format
-msgid "Do not transfer printers"
-msgstr ""
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
+msgid "Slovenia"
+msgstr "Slovenujo"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
+"Enter a user\n"
+"%s"
msgstr ""
+"Enigu uzanton\n"
+"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "ProgressBar color selection"
+msgstr "Printilan Konekton"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
msgstr ""
+"Jen la diversaj enskriboj.\n"
+"Vi povas aldoni pli aƭ Ɲanĝi la ekzistantajn."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
msgstr ""
+"Lanĉas ordonojn vicigitajn per la 'at' ordono je la horo specifita kiam\n"
+"'at' estis uzata, kaj lanĉas baĉajn ordonojn kiam la Ɲargmezo estas\n"
+"sufiĉe malgranda."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
+msgid "Radio support:"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printing test page(s)..."
-msgstr "Printas provpaĝo(j)n..."
+msgid "Installing SANE packages..."
+msgstr "Instalanta pakaĔojn SANE..."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Print option list"
-msgstr "Printilaj opcioj"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "boot disk creation"
+msgstr "Startdiskokreado"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Presanta per presilo \"%s\""
+msgid "LDAP"
+msgstr "LDAP"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Haltas de la reto"
+#: ../../bootloader.pm:1
+#, c-format
+msgid "SILO"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Presanta/skananta per \"%s\""
+msgid "Change type"
+msgstr "Ɯanĝu specon"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Presanta/skananta foton karton per \"%s\""
+msgid "SILO Installation"
+msgstr "SILO Instalado"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
+msgid "Use CD/DVDROM to backup"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_messages.pm:1
#, c-format
msgid ""
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "paranoid"
+msgstr "Paranoja"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
+msgid "Send mail report after each backup to:"
msgstr ""
#: ../../printer/printerdrake.pm:1
@@ -10199,244 +10054,212 @@ msgid ""
"because the file to print is provided by the application.\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
+msgid "Resolution"
+msgstr "Distingivo"
#: ../../printer/printerdrake.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
msgstr ""
+"Por printi al SMB-a printilo, vi devas provizi la SMB poƝtejon (Notu! Ĝi "
+"eble\n"
+"estas malsama de ĝia TCP/IP nomo!) kaj eble la IP-adreson de la "
+"printservilo,\n"
+"aldone al la opuzan nomon de la printilo vi deziras atingi kaj iun ajn\n"
+"taĆ­gan salutnomon, pasvorton, kaj laborgrupan informon."
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
+" Accept/Refuse icmp echo."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
+msgid "reconfigure"
+msgstr "rekonfiguru"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
+"Via karto povas havi 3D aparatan akceladon, sed nur kun XFree %s.\n"
+"NOTU KE ĈI TIO ESTAS EKSPERIMENTA SUBTENO KAJ EBLE SVENIGOS VIAN KOMPUTILON."
+
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Xinetd Service"
+msgstr "Printservilo"
+
+#: ../../any.pm:1
+#, c-format
+msgid "access to network tools"
+msgstr "aliro al retiloj"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
+msgid "Firmware-Upload for HP LaserJet 1000"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Did it work properly?"
+msgid "Here is a list of all auto-detected printers. "
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../install_steps_interactive.pm:1
+#, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
msgstr ""
-"Provpaĝo(j)n estis sendataj al la printila demono.\n"
-"Ĉi tiu eble postulas iom da tempo antaƭ ol la printilo komencas.\n"
-"Ĉu ĝi ĝuste funkcias?"
+"Eraro daĆ­re mi instalis \"aboot\",\n"
+"Ĉu mi devus provi perforte instali eĉ se tio detruas la unuan subdiskon?"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../standalone/drakbackup:1
+#, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
+"Options Description:\n"
"\n"
-msgstr ""
-"Provpaĝo(j)n estis sendataj al la printila demono.\n"
-"Ĉi tiu eble postulas iom da tempo antaƭ ol la printilo komencas.\n"
-"Printada stato:\n"
-"%s\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
-"Ĉu ĝi ĝuste funkcias?"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do not print any test page"
-msgstr "Printas provpaĝo(j)n..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Photo test page"
-msgstr "Printas provpaĝo(j)n..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Alternative test page (A4)"
-msgstr "Printas provpaĝo(j)n..."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Alternative test page (Letter)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Standard test page"
-msgstr "LaĆ­norma"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Print"
-msgstr "Printilo"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "No test pages"
-msgstr "Jes, printu ambaƭ de la provpaĝojn"
+msgid ""
+"Restore Selected\n"
+"Files"
+msgstr "Malinstalu printvicon"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Test pages"
-msgstr "Provu pordojn"
+#: ../../network/tools.pm:1
+#, c-format
+msgid "Please fill or check the field below"
+msgstr "Bonvole plenigu aĆ­ marku la suban kampon"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Ĉu vi deziras konfiguri tiun ĉi presilon (\"%s\")\n"
-"kiel defaĆ­ltan presilon?"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "Ĉu vi deziras konservi la modifojn en /etc/fstab?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Option %s out of range!"
+msgid "Boot Protocol"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
+msgid "LVM-disks %s\n"
+msgstr "LVM-aj (Redundanca Aro de Malmultekostaj Diskoj) diskoj %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
+msgid "The package %s is needed. Install it?"
+msgstr "La pakaÄ”o %s estas bezonata. Ĉu instali ĝin?"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
+#, c-format
+msgid "On boot"
+msgstr "Startante"
+
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Printer default settings"
-msgstr "Printilan Konekton"
+msgid "Bus identification"
+msgstr "AĆ­tentikigado"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
+msgid "Please make a backup of your data first"
+msgstr "Bonvolu fari rezervan kopion de via dateno antaĆ­e"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr ""
+msgid "Vatican"
+msgstr "Vatikano"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Interreta Konfigurado"
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr "Vi havas pli ol unu fiksdisko, sur kiu vi deziras instali Linukson?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
+msgid "Boot ISO"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
+msgid "Eritrea"
+msgstr "Eritreo"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "OKI winprinter configuration"
-msgstr "Interreta Konfigurado"
+msgid "Remove List"
+msgstr "Malproksima printilo"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
+msgid "A customizable environment"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
+msgid "Inuktitut"
+msgstr "inuita"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Morocco"
+msgstr "Maroko"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
@@ -10445,1352 +10268,1166 @@ msgstr "Kiun specon de printilo vi havas?"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Printer model selection"
-msgstr "Printilan Konekton"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Reading printer database..."
-msgstr "Legas datumbason de CUPS peliloj..."
+msgid "Add a new printer"
+msgstr "Neniu printilo"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Select model manually"
-msgstr "Malproksima printilo"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid " All of your selected data have been "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "The model is correct"
-msgstr "Ĉu tio ĉi pravas?"
+msgid "<-- Delete"
+msgstr "Forigu"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
+msgid "Nepal"
+msgstr "Nepalo"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Your printer model"
-msgstr "Malproksima printilo"
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "cpu # "
+msgstr "cpu # "
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Preparing printer database..."
-msgstr "Legas datumbason de CUPS peliloj..."
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "chunk size"
+msgstr "grandeco de pecoj"
-#: ../../printer/printerdrake.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "Location"
-msgstr "Loko"
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "ordonoj antaux startado, aux 'c' por uzi komandan linion."
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Description"
-msgstr "Priskribo"
+msgid "Problems installing package %s"
+msgstr "Problemoj instalante pakaĔon %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Name of printer"
-msgstr "Nomo de printilo"
+msgid "You will receive an alert if the load is higher than this value"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Enter Printer Name and Comments"
+msgid "Add a scanner manually"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr ""
+msgid "Reload partition table"
+msgstr "ReƝargu subdiskotabelon"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Checking device and configuring HPOJ..."
+msgid "Yes, I want autologin with this (user, desktop)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Photo memory card access on your HP multi-function device"
+msgid "Search for fonts in installed list"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Scanning on your HP multi-function device"
+msgid "The Local Network did not finish with `.0', bailing out."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Installing mtools packages..."
-msgstr "Instalanta pakaĔojn mtools..."
+msgid "Boot"
+msgstr "Starto"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Installing SANE packages..."
-msgstr "Instalanta pakaĔojn SANE..."
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "Tuner type:"
+msgstr "Ɯanĝu subdiskspecon"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
+msgstr ""
+"Nun estas tempo por elekti pressistemon por via komputilo. Aliaj mastrum-"
+"sistemoj\n"
+"proponas al vi unu, sed Linuks-Mandrako proponas du. Ĉiu el la pressistemoj\n"
+"plej taĆ­gas por aparta tipo de konfigurado.\n"
+"\n"
+" * \"pdq\" -- kio estas akronimo por \"print, don't queue\" (presu, ne "
+"vicigu), elektindas\n"
+"se vi havas rektan konekton kun via presilo, vi Ɲatus eskapi el problemoj "
+"kun\n"
+"aliaj presiloj, kaj vi ne havas retajn presilojn. (\"pdq\"\n"
+"pritraktos nur tre simplajn retokazojn kaj estas iom malrapida se\n"
+"uzata kun retoj.) Konsilindas uzi \"pdq\" se tio ĉi estas via\n"
+"unua sperto kun GNU/Linukso.\n"
+"\n"
+" * \"%s\" - \"Common Unix Printing System\", estas bonega elekto por\n"
+"presigi vian lokan presilon aƭ iun ie tra la planedo. Ĝi estas\n"
+"facile konfigurebla kaj povas agi kiel servilo aĆ­ kiel kliento por la "
+"antaĆ­a\n"
+"\"lpd \" pressistemo, kaj estas kongrua kun pli malnovaj mastrum-sistemoj\n"
+"kiuj eble ankoraĆ­ bezonas presservojn. Kvankam tre potenca, la baza "
+"konfigurado\n"
+"estas preskaĆ­ same simpla kiel \"pdq\". Se vi bezonas imiti \"lpd\"-"
+"servilon,\n"
+"certiĝu ke vi aktivigis la \"cups-lpd\"-demonon. \"%s\" enhavas grafikajn\n"
+"'front-ends' por presi aĆ­ por elekti presil-opciojn kaj por mastrumi\n"
+"la presilon.\n"
+"\n"
+"Se vi faras vian elekton nun, kaj poste trovas ke vi ne Ɲatas vian "
+"pressistemon,\n"
+"vi povas Ɲanĝi ĝin rulante PrinterDrake ekde la Mandraka KontrolCentro kaj\n"
+"alklaki la eksperto-butonon."
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "Installing HPOJ package..."
-msgstr "Instalanta pakaĔon HPOJ..."
+msgid "\"Menu\" key"
+msgstr "\"Menuo\"-klavo"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "A command line must be entered!"
-msgstr ""
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Security Administrator:"
+msgstr "Malproksimaj lpd Printilaj Opcioj"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Command line"
-msgstr "Domajna nomo"
+msgid "Please enter your login"
+msgstr "Bonvole provu denove"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
+msgid "if set to yes, check permissions of files in the users' home."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Pipe into command"
+msgid ""
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Detected model: %s %s"
-msgstr "Mi detektis modelon: %s %s"
+msgid "Fonts copy"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "A valid URI must be entered!"
-msgstr ""
+msgid "Automated"
+msgstr "AĆ­tomata"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Printer Device URI"
-msgstr "Printila Aparato URI"
+msgid "Do you want to test the configuration?"
+msgstr "Ĉu vi deziras provi la konfiguraĔon?"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Port"
-msgstr "Pordo"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer host name or IP"
-msgstr "Printilaj PoƝtejo"
+msgid ""
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+" to the Internet as a client.\n"
+"\n"
+"High: There are already some restrictions, and more automatic checks "
+"are run every night.\n"
+"\n"
+"Higher: The security is now high enough to use the system as a server "
+"which can accept\n"
+" connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+" should choose a lower level.\n"
+"\n"
+"Paranoid: This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+" features are at their maximum\n"
+"\n"
+"Security Administrator:\n"
+" If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+" email)"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "The port number should be an integer!"
-msgstr ""
+msgid "Save packages selection"
+msgstr "Konservu la pakaÄ”-elekton"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Printilaj PoƝtejo"
+msgid "Remove the last item"
+msgstr "Formatas retrokonektan dosieron %s"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "User list to restore (only the most recent date per user is important)"
msgstr ""
-"Por printi al inga printilo, vi bezonas provizi la\n"
-"poƝtejon de la printilo kaj opcie la pordnumeron."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+msgid "No net boot images created!"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "Ing-Printilaj Opcioj"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Host \"%s\", port %s"
-msgstr ""
+msgid "use pptp"
+msgstr "uzu pptp"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ""
+msgid "Choose which services should be automatically started at boot time"
+msgstr "Elektu kiuj servoj estu aĆ­tomate startigotaj dum starto"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Scanning network..."
-msgstr "Startas vian konektaĔon..."
+msgid "Learn how to use this printer"
+msgstr "Ĉu vi deziras provi la konfiguraĔon?"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Printer auto-detection"
-msgstr "Malproksima printilo"
+msgid "Configure the network now"
+msgstr "Konfiguru retumon"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "NCP queue name missing!"
-msgstr ""
+msgid "Choose a mirror from which to get the packages"
+msgstr "Elektu spegulon de kiu havigi la pakaĔojn"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "NCP server name missing!"
+msgid ""
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
msgstr ""
+"La regrandecigilo por la FAT (Dosiero-Atingo-Tablo) ne povas trakti\n"
+"vian subdiskon, la sekvanta eraro okazis: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Print Queue Name"
-msgstr "Printvica Nomo"
+msgid "Which sector do you want to move it to?"
+msgstr "Al kiu sektoro vi deziras movi?"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Printer Server"
-msgstr "Printservilo"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Por print al NetWare printilo, vi devas provizi la NetWare printservilan\n"
-"nomon (Notu! Ĝi eble estas malsama de ĝia TCP/IP nomo!) aldone al la\n"
-"printvican nomon por la printilo vi deziras atingi kaj iun ajn taĆ­gan\n"
-"salutnomon kaj pasvorton."
+msgid "Do you want to click on this button?"
+msgstr "Ĉu vi deziras alklaki tiun butonon?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "NetWare Printer Options"
-msgstr "NetWare Printilaj Opcioj"
+msgid "Bahamas"
+msgstr "Bahamoj"
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
+#, fuzzy, c-format
+msgid "Manual configuration"
+msgstr "Interreta Konfigurado"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
+msgid "search"
+msgstr "serĉu"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
msgstr ""
+"Ĉi tiu pakaÄ”o Ɲargas la elektitan klavarmapon laĆ­ /etc/sysconfig/keyboard.\n"
+"Vi povas elekti ĉi tion per la kbdconfig utilprogramo. Vi lasus ĉi tion\n"
+"ebligatan por la plejmulto da sistemoj."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "SECURITY WARNING!"
-msgstr ""
+msgid "Xpmac (installation display driver)"
+msgstr "Xpmac (installad-ekran-pelilo)"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Samba share name missing!"
+msgid "Zeroconf host name must not contain a ."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Either the server name or the server's IP must be given!"
+msgid ""
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
msgstr ""
+"Syslog (sistemlogilo) estas la rimedo per kiu multaj dajmonoj registras\n"
+"mesaĝojn al diversaj sistemlogdosieroj. Ĝi estas bona ideo ĉiam uzi\n"
+"syslog."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Auto-detected"
-msgstr "Malproksima printilo"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Workgroup"
-msgstr "Laborgrupo"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Share name"
-msgstr "Opuza nomo"
+msgid "Unknown/Others"
+msgstr "Nekonata/Aliaj"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "SMB server IP"
-msgstr "IP de SMB servilo"
+msgid "No TV Card detected!"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "SMB server host"
-msgstr "PoƝtejo de SMB servilo"
+msgid "Options"
+msgstr "Opcioj"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
+msgid "The printer \"%s\" is set as the default printer now."
msgstr ""
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#, c-format
msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
msgstr ""
-"Por printi al SMB-a printilo, vi devas provizi la SMB poƝtejon (Notu! Ĝi "
-"eble\n"
-"estas malsama de ĝia TCP/IP nomo!) kaj eble la IP-adreson de la "
-"printservilo,\n"
-"aldone al la opuzan nomon de la printilo vi deziras atingi kaj iun ajn\n"
-"taĆ­gan salutnomon, pasvorton, kaj laborgrupan informon."
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Vindozo 9x/NT) Printilaj Opcioj"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Presilo \"%s\" en servilo \"%s\""
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ", printer \"%s\" on server \"%s\""
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Remote printer name missing!"
-msgstr "Malproksima poƝtejo"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remote host name missing!"
-msgstr "Malproksima poƝtejo"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remote printer name"
+msgid "Auto-detected"
msgstr "Malproksima printilo"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remote host name"
-msgstr "Malproksima poƝtejo"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-"Por uzi malproksima lpd printvico, vi devas provizi la poƝtejon de la\n"
-"printservilo kaj la printviconomon ĉe tiu servilo en kiun taskoj devus\n"
-"esti metata."
+"Nun kiam via Interreta konekto estas konfigurata,\n"
+"vi povas konfiguri vian komputilon por disdividi ĝian Interretan konekton.\n"
+"Notu: vi bezonas dediĉan Retadaptilon por konfiguri Lokan Reton (LAN).\n"
+"\n"
+"Ĉu vi deziras konfiguri Disdividadon de Interreta Konekto?\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Malproksimaj lpd Printilaj Opcioj"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Manual configuration"
-msgstr "Interreta Konfigurado"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Printila Aparato URI"
+msgid ""
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
+msgstr ""
+"Ne libera spaco por 1mb-startparto! La instalado daurigos, sed por startigi "
+"vian sistemon, vi devos krei la startpartan subdiskon en DiskDrake"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+"Please choose the printer you want to set up or enter a device name/file "
+"name in the input line"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Refuse"
+msgstr "Malakceptu"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "HFS"
+msgstr "HFS"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
msgstr ""
+"HardDrake rulas aparato-provon, kaj laĆ­opcie konfiguras\n"
+"novan/Ɲanĝitan aparataron."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#, c-format
+msgid "Remote Printers"
+msgstr "Malproksimaj printiloj"
-#: ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
-msgstr ""
+msgid "Creating and formatting file %s"
+msgstr "Kreas kaj formatas dosieron %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Here is a list of all auto-detected printers. "
+msgid "if set to yes, check additions/removals of sgid files."
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Currently, no alternative possibility is available"
+msgid ""
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+msgid "Choose an existing LVM to add to"
msgstr ""
+"Elektu ekzistantan RAID (Redundanca Aro de Malmultekostaj Diskoj) por\n"
+"aldoni al"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "The following printer was auto-detected. "
-msgstr "La sekvaj pakaĔoj estos malinstalataj"
+msgid "xfs restart"
+msgstr "limigu"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Please choose the printer you want to set up or enter a device name/file "
-"name in the input line"
-msgstr ""
+msgid "No partition available"
+msgstr "neniuj haveblaj subdiskoj"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
+msgid "Use the scanners on hosts: "
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+msgid "Unselected All"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Available printers"
-msgstr "Loka printilo"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "No printer found!"
-msgstr "Loka printilo"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "You must enter a device or file name!"
-msgstr "Printila Aparato URI"
+msgid "Domain Name Resolver"
+msgstr "Domajna nomo"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+msgid "Encryption key (again)"
msgstr ""
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Local Printer"
-msgstr "Loka printilo"
-
-#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "USB printer \\#%s"
-msgstr "USB-presilo \\#%s"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "Presilo sur paralela pordo \\#%s"
+msgid "Samba share name missing!"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Presilo \"%s\" sur SMB/vindoza servilo \"%s\""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Reta Printilo (TCP/ingo)"
+msgid "True Type install done"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Detected %s"
+msgid "Detection in progress"
msgstr "Duobla surmetingo %s"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "SMB/Vindozo 95/98/NT"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ", network printer \"%s\", port %s"
+msgid "Build Whole Kernel -->"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
+msgid "Welcome to %s"
+msgstr "Bonvenon al %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgid "Please insert the Update Modules floppy in drive %s"
msgstr ""
+"EnƝovu la disketon kun ĝisdatigaj moduloj (Update Modules) en drajvo %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
+msgid "Bootsplash"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Malproksima printilo"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
msgid ""
+"The following printer\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
+"%s%s\n"
+"is directly connected to your system"
+msgstr "Via komputilo ne havas retadaptilon!"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer sharing on hosts/networks: "
+msgstr "Printilo"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
+"Iuokaze, la %s pelilo bezonas havi aldonan informon por ĝuste funkcii,\n"
+"kvankam ĝi normale funkcias bone sen la informo. Ĉu vi deziras specifi\n"
+"aldonajn opciojn por ĝi aƭ permesi al la pelilo esplori vian komputilon\n"
+"por la informo ĝi bezonas? Kelkfoje, esplori svenas komputilon, sed\n"
+"ĝi ne devus kaƭzi difekton."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
+msgid "Not the correct CD label. Disk is labelled %s."
+msgstr ""
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
+"%s\n"
"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
+"Click on Configure to launch the setup wizard."
+msgstr "Disdividado de Interreta Konekto"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Cuba"
+msgstr "Kubo"
#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Searching for new printers..."
+msgstr "Loka printilo"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
-msgstr ""
+msgid "Belize"
+msgstr "Belizio"
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ")"
+msgid " (multi-session)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid " on "
+msgid "Kernel Boot Timeout"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "("
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
+"Via karto povas havi 3D aparatan akceladon, sed nur kun XFree %s.\n"
+"XFree %s subtenas vian karton kiu eble havas pli bonan subtenon en 2D."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuring printer ..."
-msgstr "Konfiguru Printilon"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "La Dispartigsorĉilo de DrakX trovis ĉi tiujn solvojn:"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Searching for new printers..."
-msgstr "Loka printilo"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Hungarian"
+msgstr "Hungara"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
msgstr ""
+"Elektu vian interretprovizanton.\n"
+" Se ĝin ne estas en la listo, elektu Nelistiĝitan"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr ""
+msgid "Automatic time synchronization (using NTP)"
+msgstr "Auxtomata hor-sinkronizado (uzante NTP) "
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Ĉu vi deziras starti vian konektaĔon je startado de la sistemo?"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "8 MB"
+msgstr "8 MB"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "Ĉu vi deziras provi printado?"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "LDAP Server"
+msgstr "LDAP Servilo"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
msgstr ""
+"PCMCIA subteno kutime estas subteno de aĔo kiel ethernet kaj modemoj en\n"
+"tekkomputiloj. Ĝi ne estos lanĉata krom se vi konfiguras ĝi por ke ĝi\n"
+"estu sendanĝera ĉe komputiloj kiuj ne bezonas ĝin."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr ""
+msgid "Choose your country"
+msgstr "Elektu vian landon"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
-"There are %d unknown printers directly connected to your system"
+"- System Files:\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
+msgid "Standalone Tools"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr "Via komputilo ne havas retadaptilon!"
+msgid "Where"
+msgstr "Rado"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "Via komputilo ne havas retadaptilon!"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "but not matching"
+msgstr "sed ne konformanta(j)"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../harddrake/sound.pm:1
+#, c-format
msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "Via komputilo ne havas retadaptilon!"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "and %d unknown printers"
-msgstr "Neniu printilo"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "and one unknown printer"
-msgstr "Neniu printilo"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Checking your system..."
-msgstr "Kiun printsistemo vi deziras uzi?"
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Restarting CUPS..."
-msgstr "limigu"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Configuring PCMCIA cards..."
+msgstr "Konfiguras PCMCIA kartojn..."
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr ""
+msgid "kdesu missing"
+msgstr "kdesu mankas"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Examples for correct IPs:\n"
+msgid "Encryption key"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Ĉu tio ĉi pravas?"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Microsoft IntelliMouse"
+msgstr "Mikrosofta IntelliMouse"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Server IP missing!"
-msgstr "Printilaj PoƝtejo"
+#: ../../lang.pm:1
+#, c-format
+msgid "Christmas Island"
+msgstr "Kristnask-Insulo"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr ""
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr "Instalado de startƝargilo malsukcesis. La sekvanta eraro okazis:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
+msgid "EIDE/SCSI channel"
msgstr ""
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Malproksima CUPS-a servilo"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected server"
-msgstr "Malinstalu printvicon"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Edit selected server"
-msgstr "Malinstalu printvicon"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Add server"
-msgstr "Aldonu uzanto"
-
-#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
+msgid "Set this printer as the default"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "IP address of host/network:"
-msgstr ""
+msgid "partition %s"
+msgstr "subdisko: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
+msgid "Paranoid"
+msgstr "Paranoja"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr ""
+msgid "NIS"
+msgstr "NIS"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Host/network IP address missing."
+msgid "<-- Del User"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
+msgid "Location on the bus"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Sharing of local printers"
+msgid "No printer found!"
msgstr "Loka printilo"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected host/network"
-msgstr "Malinstalu printvicon"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Edit selected host/network"
+msgid "the vendor name of the device"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Add host/network"
-msgstr ""
+msgid "Erase entire disk"
+msgstr "ForviƝu la tutan diskon"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
+msgid " (Default)"
+msgstr " (DefaĆ­lta)"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Automatic correction of CUPS configuration"
+msgid "Automatic reconfiguration"
msgstr "Post-instala konfigurado"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
+msgid "Receiving Speed:"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Japanese text printing mode"
-msgstr "Konfiguru retumon"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
+msgid "Turks and Caicos Islands"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "None"
-msgstr "Finata"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Additional CUPS servers: "
-msgstr "IP de SMB servilo"
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "No remote machines"
-msgstr "Malproksima printilo"
+msgid "permissions"
+msgstr "subdisko: %s"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Custom configuration"
-msgstr "Interreta Konfigurado"
+#, c-format
+msgid "<- Previous"
+msgstr "<- AntaĆ­a"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Printilo"
+msgid "Internet Connection Sharing configuration"
+msgstr "Interreta konektaĔo kaj konfiguro"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr ""
+msgid "Toggle between flat and group sorted"
+msgstr "Ɯanĝu inter ebena kaj ordigita je grupoj"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr ""
+msgid "Themes"
+msgstr "Temoj"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
+msgid "Options: %s"
+msgstr "Opcioj: %s"
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
-msgstr ""
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
+msgstr "Disdividado de Interreta Konekto"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "CUPS printer configuration"
+msgid "OKI winprinter configuration"
msgstr "Interreta Konfigurado"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
-msgstr ""
+msgid "Saint Helena"
+msgstr "Sankt-Heleno"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Security Level"
+msgstr "sekurnivelo"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
msgid ""
+"Some steps are not completed.\n"
"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
msgstr ""
-"Kun malproksima CUPS servilo, vi ne devas konfiguri iun printilon\n"
-"ĉi tie; printiloj estos aƭtomate dektektataj. Se vi havas dubojn,\n"
-"elektu \"Malproksima CUPS servilo\"."
+"Kelkaj paƝoj ne finiĝis.\n"
+"\n"
+"Ĉu vi vere volas ĉesi nun?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "How is the printer connected?"
-msgstr "Kiel estas la printilo konektata?"
+msgid "Sudan"
+msgstr "Sudano"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Select Printer Connection"
-msgstr "Elektu Printilan Konekton"
+msgid "Polish (qwertz layout)"
+msgstr "Pola (qwertz aranĝo)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
+msgid "Syria"
+msgstr "Sirio"
-#: ../../security/help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
#, c-format
msgid ""
-"Arguments: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
"\n"
-"Set the user umask."
-msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (val)\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
"\n"
-"Set the shell timeout. A value of zero means no timeout."
msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (size)\n"
+"Bonvenon al %s, la mastruma sistema elektilo!\n"
+"\n"
+"Elektu mastruman sistemon de la supra listo aux\n"
+"atendu dum %d sekundoj por defauxlta starto.\n"
"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr ""
+msgid "Portuguese"
+msgstr "Portugala"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check open ports."
-msgstr ""
+msgid "Loopback file name: "
+msgstr "Retrokonekta dosieronomo: "
-#: ../../security/help.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "DNS-servila adreso devas esti en formato 1.2.3.4"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr ""
+msgid "Serbia"
+msgstr "serba"
-#: ../../security/help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
+msgid "Newzealand"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr ""
+msgid "This directory should remain within the root filesystem"
+msgstr "Ĉi tiu dosierujo devus resti interne de la radika dosierosistemo (/)"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
+msgid "CapsLock key"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
+msgid "Install bootloader"
+msgstr "Instalu restart-Ɲargilon"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr ""
+msgid "Select the memory size of your graphics card"
+msgstr "Elektu memorkapaciton de via grafika karto"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
+"[OPCIOJ]\n"
+"Reto & Interret-konektad kaj afiƝad-aplikaÄ”o\n"
+"\n"
+"--defaultintf interface : montras tiun interfacon defaĆ­lte\n"
+"--connect : konektas kun interreto se ne jam konektite\n"
+"--disconnect : malkonektas de interreto se jam konektite\n"
+"--force : uzata kun (dis)connect : trudas (mal-)konektadon.\n"
+"--status : montras 1 se konektite, alie 0, poste eliras.\n"
+"--quiet : ne estu interaktiva. Uzata kun (dis)connect."
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
+msgid "Dynamic IP Address Pool:"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr ""
+msgid "LVM name?"
+msgstr "LVM-nomo?"
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr ""
+msgid "Found %s %s interfaces"
+msgstr "Trovis %s %s interfacojn"
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
+msgid "sticky-bit"
msgstr ""
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Post Install"
+msgstr "Instalu"
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, report unowned files."
-msgstr ""
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The internal domain name"
+msgstr "Neniu printilo"
-#: ../../security/help.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the root umask."
-msgstr ""
+msgid "Card IRQ"
+msgstr "IRQ de Karto"
#: ../../security/help.pm:1
#, c-format
msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
+"Arguments: (umask)\n"
"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+"Set the user umask."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
-msgstr ""
+msgid "logdrake"
+msgstr "logdrake"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
+"Litertipar-Import-kaj afiƝ- aplikaÄ”o \n"
+"--windows_import : importu de ĉiuj atingeblaj vindozaj subdiskoj.\n"
+"--xls_fonts : montru ĉiujn litertiparojn jam ekzistantajn de xls\n"
+"--strong : forta kontrolado de litertiparo.\n"
+"--install : akceptu ĉian litertipar-dosieron kaj ĉian dosierujon.\n"
+"--uninstall : malinstalu ĉian litertiparon kaj ĉian litertiparan "
+"dosierujon.\n"
+"--replace : anstataƭigu ĉian litertiparon se jam ekzistas\n"
+"--application : 0 nenia aplikaĔo.\n"
+" : 1 ĉiuj haveblaj aplikaÄ”oj subtenataj.\n"
+" : name_of_application aĆ­ iel tiel por staroffice \n"
+" : kaj gs por ghostscript nur por tiu ĉi."
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "Elektu la disketdrajvo vi deziras uzi por krei la startdisketon"
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
+msgid "LILO with text menu"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
+msgid "Everything (no firewall)"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
-msgstr ""
+msgid "You must specify a kernel image"
+msgstr "Vi devas decidi pri kerno-bildo"
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
+msgid ", multi-function device on USB"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
-msgstr ""
+msgid "Do"
+msgstr "Faru"
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "Kontaktu la spegulon por havigi la liston de havebla pakaĔoj"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
+msgid "Lithuanian AZERTY (old)"
+msgstr "Litova AZERTY-a (malnova)"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
-msgstr ""
+msgid "Brazilian (ABNT-2)"
+msgstr "Brazila (ABNT-2)"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
+msgid "IP address of host/network:"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
-msgstr ""
+msgid "System installation"
+msgstr "Sistem-nstalado"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
-msgstr ""
+msgid "Saint Vincent and the Grenadines"
+msgstr "Sent-Vincento kaj la Grenadinoj"
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
-msgstr ""
+msgid "/File/_Open"
+msgstr "/Dosiero/_Malfermu"
#: ../../security/help.pm:1
#, c-format
@@ -11801,820 +11438,693 @@ msgid ""
"to the X server on the tcp port 6000 or not."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Location of auto_install.cfg file"
+msgstr "Kreas aĆ­toinstalan disketon"
+
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
+msgid "Open Firmware Delay"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
+msgid "Hungary"
+msgstr "Hungario"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Total progess"
+msgstr "Provu pordojn"
+
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Color configuration"
+msgstr "Interreta Konfigurado"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
+msgid "New Zealand"
+msgstr "Nov-Zelando"
-#: ../../security/help.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "please choose the date to restore"
+msgstr "Bonvole, elektu la specon de via muso."
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
+msgid "Switching from ext2 to ext3"
+msgstr "Ɯaltas de ext2 al ext3"
-#: ../../security/help.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
+msgid "LPRng"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
-msgstr ""
+msgid "Netherlands Antilles"
+msgstr "Nederlandaj Antiloj"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
+msgid "Browse to new restore repository."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
"\n"
-" Accept/Refuse broadcasted icmp echo."
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "and %d unknown printers"
+msgstr "Neniu printilo"
+
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Accept/Refuse bogus IPv4 error messages."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
msgstr ""
-#: ../../security/level.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Security Administrator (login or email)"
+msgid "No ISDN PCI card found. Please select one on the next screen."
msgstr ""
+"Neniu ISDN-a PCI-a karto trovata. Bonvole elektu unu el la PCI-aj kartojn "
+"sur\n"
+"la sekvanta ekrano."
-#: ../../security/level.pm:1
+#: ../../common.pm:1
#, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Use libsafe for servers"
-msgstr "Elektu opciojn por servilo"
-
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Security level"
-msgstr "Elektas sekurnivelon"
+msgid "GB"
+msgstr "GB"
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Please choose the desired security level"
-msgstr "Elektu sekurnivelon?"
+#: ../../any.pm:1
+#, c-format
+msgid "Please give a user name"
+msgstr "Bonvole donu salutnomon"
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "DrakSec Basic Options"
-msgstr "Opcioj"
+#: ../../any.pm:1
+#, c-format
+msgid "Enable CD Boot?"
+msgstr "Ĉu ebligi CD Boot?"
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid " enter `void' for void entry"
msgstr ""
-"Ni uzas aspektojn de la kvara nivelo, sed nun la komputilo estas tute\n"
-"malfermita. Sekurecaj aspektoj estas ĉe iliaj maksimumoj."
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "on Hard Drive"
msgstr ""
-"Kun ĉi tiu sekurnivelo, uzado de ĉi tiu komputilo kiel servilo ebliĝas.\n"
-"La sekureco nun estas sufiĉe alta por uzi la sistemon kiel servilo kiu\n"
-"akceptas konektojn de multaj klientoj."
-#: ../../security/level.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
+msgid "Winmodem connection"
+msgstr "Winmodem-konekto"
-#: ../../security/level.pm:1
-#, fuzzy, c-format
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
+"\n"
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
msgstr ""
-"Ĉi tiu estas la normala sekureco rekomendata por komputilo kiu estos uzata\n"
-"por konekti al la Interreto kiel kliento. Nun estas sekurecaj kontroloj."
-#: ../../security/level.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
+"Arguments: (arg)\n"
+"\n"
+"Set the password history length to prevent password reuse."
msgstr ""
-"Pasvortoj nun estas ebligataj, sed uzado kiel reta komputilo estas ankoraĆ­\n"
-"ne rekomendita."
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
+msgid "Now, you can run xawtv (under X Window!) !\n"
msgstr ""
-"vi devus uzi ĉi tiun nivelon zorge. Ĝi faras vian komputilon pli facila\n"
-"por uzi, sed delikatega: vi devus neniam uzi ĝi surrete.\n"
-"Ĝi ne havas pasvortojn."
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Paranoid"
-msgstr "Paranoja"
-
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Higher"
-msgstr "Alta"
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr "Nesufiĉa interƝanĝospaco por plenumi instalado, bonvolu aldoni iom"
-#: ../../security/level.pm:1
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "High"
-msgstr "Alta"
+msgid "%s on %s"
+msgstr "%s sur %s"
-#: ../../security/level.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Poor"
-msgstr "Malbona"
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Welcome To Crackers"
-msgstr "Bonvenon Al Rompistoj"
+msgid "Which is your timezone?"
+msgstr "kio estas vian horzonon?"
-#: ../../standalone/XFdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Bonvolu resaluti en %s-n por aktivigi la Ɲanĝojn."
+msgid "Guinea"
+msgstr "Gvineo"
-#: ../../standalone/XFdrake:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr ""
-"Bonvole adiaƭu kaj sekve uzu Kontrol-Alt-RetropaƝo (Ctrl-Alt-Backspace)."
+msgid "The system is now connected to the Internet."
+msgstr "La sistemo estas nun konektita al Interreto."
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
-msgstr ""
+msgid "South Georgia and the South Sandwich Islands"
+msgstr "Sud-Georgio kaj la Sudaj Sandviĉaj Insuloj"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
+msgid "Japan (broadcast)"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr ""
+msgid "Mozambique"
+msgstr "Mozambiko"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr ""
+msgid "Icon"
+msgstr "Piktogramo"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "No floppy drive available!"
-msgstr "Neniu disketilo havebla"
+msgid "Please choose what you want to backup"
+msgstr "Bonvole, elektu la pakaĔojn kiujn vi deziras instali."
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Floppy can be removed now"
-msgstr ""
+msgid "256 colors (8 bits)"
+msgstr "256 koloroj (8 bitoj)"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "Couldn't access the floppy!"
-msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Please insert floppy disk:"
-msgstr "EnƝovu disketon en drajvo %s"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Write Config"
-msgstr "rekonfiguru"
+msgid "Read-write"
+msgstr "Lega-skriba"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr ""
+msgid "Size: %s\n"
+msgstr "Grandeco: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "dhcpd Server Configuration"
-msgstr "LAN KonfiguraĔo"
+msgid "Hostname: "
+msgstr "PoƝtejo: "
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "IP Range End:"
-msgstr ""
+msgid "Chunk size %s\n"
+msgstr "Grandeco de pecoj %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "IP Range Start:"
+msgid "Build the future of Linux!"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Name Servers:"
-msgstr "NIS Servilo"
-
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Domain Name:"
-msgstr "Domajna nomo"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Broadcast Address:"
-msgstr ""
+msgid "Local Printer"
+msgstr "Loka printilo"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Subnet Mask:"
+msgid ""
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Routers:"
-msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Netmask:"
-msgstr "Retmasko"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Subnet:"
-msgstr ""
+msgid "ADSL connection"
+msgstr "ADSL-konekto"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
+msgid "No configuration, please click Wizard or Advanced.\n"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "dhcpd Config..."
-msgstr "Mi konfiguras..."
-
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Delete Client"
-msgstr "Forigu"
+msgid "Error!"
+msgstr "Eraro"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "<-- Edit Client"
-msgstr ""
+msgid "cable connection detected"
+msgstr "kabla konektaĔon detektita"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add Client -->"
+msgid "Permission denied transferring %s to %s"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Allow Thin Clients"
-msgstr ""
+msgid "/_Report Bug"
+msgstr "/_Raportu Cimo"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Thin Client"
-msgstr ""
+msgid "Resize"
+msgstr "Regrandecigu"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "No net boot images created!"
-msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "type: %s"
-msgstr "Speco: "
+msgid "Dominica"
+msgstr "Dominiko"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "<-- Del User"
+msgid "Please enter the device name to use for backup"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Add User -->"
-msgstr "Aldonu uzanto"
-
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
-msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Delete All NBIs"
-msgstr "Elektu dosieron"
+msgid "Resolution: %s\n"
+msgstr "Distingivo: %s\n"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "<-- Delete"
-msgstr "Forigu"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "matching"
+msgstr "konformanta(j)"
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
#, c-format
-msgid "This will take a few minutes."
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
-msgid "Build All Kernels -->"
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
+"Bonvolu elekti la ĝustan pordon. Ekzemple, la \"COM1\"-a\n"
+"pordo sub MS Vindozo estas nomata \"ttyS0\" sub GNU/Linukso."
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "No NIC selected!"
-msgstr "Ne konektita"
-
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Build Single NIC -->"
-msgstr ""
+msgid "The following packages are going to be removed"
+msgstr "La sekvaj pakaĔoj estos malinstalataj"
-#: ../../standalone/drakTermServ:1
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
#, c-format
-msgid "No kernel selected!"
-msgstr ""
+msgid "Connect to the Internet"
+msgstr "Konektu al la Interreto"
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Build Whole Kernel -->"
-msgstr ""
+msgid "Use existing partitions"
+msgstr "Uzu ekzistantajn subdiskojn"
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Boot ISO"
-msgstr ""
+msgid "Canadian (Quebec)"
+msgstr "Kanada (Kebeka)"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Boot Floppy"
-msgstr ""
+msgid "Mouse device: %s\n"
+msgstr "Musaparato: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
-"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
-"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
-"\n"
+msgid "Reselect correct fonts"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
+"Options Description:\n"
"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
"\n"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"Options\n"
"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Add/Del Clients"
-msgstr ""
+msgid "We are now going to configure the %s connection."
+msgstr "Ni konfiguros nun la %s-konekton."
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, fuzzy, c-format
-msgid "Add/Del Users"
-msgstr "Aldonu uzanto"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Net Boot Images"
-msgstr ""
+msgid "MandrakeExpert Corporate"
+msgstr "Spertulo"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Etherboot Floppy/ISO"
+msgid ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
msgstr ""
+" [ĉio]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Stop Server"
-msgstr "NIS Servilo"
-
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Start Server"
-msgstr "NIS Servilo"
+msgid "Write protection"
+msgstr "Malproksima printilo"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Disable Server"
-msgstr "Datumbazoj"
+msgid "You've not selected any font"
+msgstr "Malinstalu printvicon"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Enable Server"
-msgstr "Datumbazoj"
+#: ../../steps.pm:1
+#, c-format
+msgid "Language"
+msgstr "Elektu vian lingvon"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "Interreta Konfigurado"
+msgid "Printer model selection"
+msgstr "Printilan Konekton"
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Remove the last item"
-msgstr "Formatas retrokonektan dosieron %s"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
+msgstr ""
+"Post vi Ɲanĝas la specon de subdisko %s, ĉiuj datenoj en ĉi tiu subdisko "
+"estos\n"
+"perdata"
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Add an item"
-msgstr "Aldonu uzulon"
+#: ../../common.pm:1
+#, c-format
+msgid "%d seconds"
+msgstr "%d sekundoj"
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Auto Install"
-msgstr "Instalu"
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#, c-format
+msgid "Insert a blank floppy in drive %s"
+msgstr "EnƝovu malplenan disketon en drajvo %s"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
+msgid "A valid URI must be entered!"
msgstr ""
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Congratulations!"
-msgstr "Gratulojn!"
+msgid "Found \"%s\" interface do you want to use it ?"
+msgstr ""
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+msgid "Re-configure interface and DHCP server"
msgstr ""
-#: ../../standalone/drakautoinst:1
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Sound configuration"
+msgstr "Son-konfigurado"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Creating auto install floppy"
-msgstr "Kreas aĆ­toinstalan disketon"
+msgid "Photo test page"
+msgstr "Printas provpaĝo(j)n..."
-#: ../../standalone/drakautoinst:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "manual"
-msgstr ""
+msgid "Custom disk partitioning"
+msgstr "subdiskigo"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
+msgid "Enter Printer Name and Comments"
msgstr ""
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Post-instala konfigurado"
+msgid ""
+"The following printers\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr "Via komputilo ne havas retadaptilon!"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "replay"
-msgstr "Reludu"
+msgid "type: %s"
+msgstr "Speco: "
-#: ../../standalone/drakautoinst:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovakian (QWERTY)"
+msgstr "Slovaka (QWERTY)"
+
+#: ../../standalone/draksound:1
+#, fuzzy, c-format
+msgid "No Sound Card detected!"
+msgstr "Ne konektita"
+
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#, c-format
+msgid "Mouse Port"
+msgstr "Muspordo"
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
msgstr ""
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Auto Install Configurator"
-msgstr "Post-instala konfigurado"
+msgid "Ftp Server"
+msgstr "NIS Servilo"
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
#, c-format
-msgid "I can't find needed image file `%s'."
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable msec hourly security check."
msgstr ""
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "%s fonts conversion"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Error!"
-msgstr "Eraro"
+msgid "the type of bus on which the mouse is connected"
+msgstr "Bonvole, elektu al kiu seria pordo estas via muso konektata."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Uganda"
+msgstr "Ugando"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (size)\n"
"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
+"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"options description:\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
+"\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
+"\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
+"\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
+"\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
+"\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
+"\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
+"\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
"\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
+"\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
+"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
+"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
+"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Comoros"
+msgstr "Komoroj"
+
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Description:\n"
"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
+"We are now going to configure the %s connection.\n"
"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"Press OK to continue."
+msgstr ""
"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
"\n"
"\n"
-msgstr ""
+"Ni konfiguros nun l %s konekton.\n"
+"\n"
+"\n"
+"Premu JES por daĆ­rigi."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+msgid "Yaboot mode"
+msgstr "Yaboot modalo"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Nespecifa 3 Butona Muso"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select another media to restore from"
+msgstr "Bonvole, elektu la specon de via muso."
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Software Manager"
+msgstr "Opuza nomo"
+
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"restore description:\n"
+"Restore Description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
@@ -12626,4582 +12136,5125 @@ msgid ""
"\n"
" - Incremental Backups:\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
+msgid "Re-submit"
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
+msgid "CD in place - continue."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
+msgid "KB"
+msgstr "KB"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Drakbackup"
-msgstr ""
+msgid "Network & Internet"
+msgstr "Reto kaj Interreto"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore"
-msgstr "RestaĆ­ru de dosiero"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Litova \"fonetika\" QWERTY-a"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Now"
-msgstr "Dosiersistemo konfiguro"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Net Boot Images"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Advanced Configuration"
-msgstr "LAN KonfiguraĔo"
+msgid "Sharing of local scanners"
+msgstr "Loka printilo"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Wizard Configuration"
-msgstr "LAN KonfiguraĔo"
+#: ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "View Backup Configuration."
-msgstr "Reta KonfiguraĔo"
+#: ../../services.pm:1
+#, c-format
+msgid "Services and deamons"
+msgstr "Servoj kaj demonoj"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Backup Now from configuration file"
-msgstr "Reta KonfiguraĔo"
+msgid "Remote host name missing!"
+msgstr "Malproksima poƝtejo"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Drakbackup Configuration"
-msgstr "Reta KonfiguraĔo"
+#: ../../fsedit.pm:1
+#, c-format
+msgid "with /usr"
+msgstr "kun /usr"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Total Progress"
+msgid "Network"
+msgstr "Reto"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Sending files..."
-msgstr "Konservu en dosiero"
+#: ../../any.pm:1
+#, c-format
+msgid "This password is too simple"
+msgstr "Ĉi tiu pasvorto estas tro simpla"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "files sending by FTP"
+msgid "Slovakian (QWERTZ)"
+msgstr "Slovaka (QWERTZ)"
+
+#: ../../share/advertising/06-development.pl:1
+#, c-format
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup other files"
-msgstr "Malbona rezerva dosiero"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Truly minimal install (especially no urpmi)"
+msgstr "Vere minimuma instalado (precipe ne urpmi)"
#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup user files"
-msgstr "Malbona rezerva dosiero"
+#, c-format
+msgid ""
+" Transfer \n"
+"Now"
+msgstr ""
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Backup system files"
-msgstr "Malbona rezerva dosiero"
+msgid "Use daemon"
+msgstr "Salutnomo"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
#, c-format
-msgid "Under Devel ... please wait."
+msgid "Authentication"
+msgstr "AĆ­tentikigado"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Additional CUPS servers: "
+msgstr "IP de SMB servilo"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please select data to backup..."
-msgstr "Bonvole, elektu lingvon por uzi."
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount %s?"
+msgstr "Kie vi deziras kroĉi aparaton %s?"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Please select media for backup..."
-msgstr "Bonvole, elektu lingvon por uzi."
+msgid "Restore Via Network"
+msgstr "RestaĆ­ru de dosiero"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please select data to restore..."
-msgstr "Bonvole, elektu lingvon por uzi."
+#: ../../lang.pm:1
+#, c-format
+msgid "Algeria"
+msgstr "Alĝerio"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "La sekvaj pakaĔoj estos instalataj"
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd-size"
+msgstr "Initrd-grandeco"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
+msgid "\tBackups use tar and gzip\n"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Next"
-msgstr "Sekvanta ->"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "2 MB"
+msgstr "2 MB"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Previous"
-msgstr "<- AntaĆ­a"
+#: ../../standalone.pm:1
+#, c-format
+msgid ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
+"[OPCIO]...\n"
+" --no-confirmation ne postulu unue konfirmadon en MandrakeUpdate mode\n"
+" --no-verify-rpm ne kontrolu la pakaÄ”-subskribojn\n"
+" --changelog-first afiƝu changelog antaƭ dosierliston en la priskribo-"
+"fenestro\n"
+" --merge-all-rpmnew proponu mergi ĉiujn trovitajn .rpmnew/.rpmsave -"
+"dosierojn"
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Save"
-msgstr "Stato:"
+msgid "Setting Default Printer..."
+msgstr "Loka printilo"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Build Backup"
-msgstr "Malbona rezerva dosiero"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Interface %s (using module %s)"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Progress"
-msgstr "RestaĆ­ru de dosiero"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Name: %s\n"
+msgstr "Nomo: %s\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Restore From Catalog"
-msgstr "Sava subdiskotabelo"
+msgid "Generating preview ..."
+msgstr "Detektas aparatojn..."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Browse to new restore repository."
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "CD in place - continue."
-msgstr ""
+msgid "serial"
+msgstr "seria"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Custom Restore"
-msgstr "Akomodata"
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "DVD-ROM"
+msgstr "DVD-ROM"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore all backups"
-msgstr ""
+msgid "Georgian (\"Latin\" layout)"
+msgstr "Kartvela (\"Latina\" aranĝo)"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Failed..."
-msgstr "RestaĆ­ru de dosiero"
+#: ../../share/advertising/09-mdksecure.pl:1
+#, c-format
+msgid "Get the best items with Mandrake Linux Strategic partners"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Files Restored..."
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Path or Module required"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Hostname required"
-msgstr "PoƝtejo: "
+#: ../../lang.pm:1
+#, c-format
+msgid "Kenya"
+msgstr "Kenjo"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Username required"
-msgstr "Salutnomo"
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``Unmount'' first"
+msgstr "Uzu ``Malmuntu'' antaĆ­e"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Installing mtools packages..."
+msgstr "Instalanta pakaĔojn mtools..."
+
+#: ../../any.pm:1
+#, c-format
+msgid "You must specify a root partition"
+msgstr "Vi devas difini radikan (root) subdiskon"
+
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Password required"
-msgstr "Pasvorto"
+msgid "first step creation"
+msgstr "Startdiskokreado"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Host Path or Module"
+msgid "Both Shift keys simultaneously"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Host Name"
-msgstr "PoƝtejo"
+msgid "Select a scanner model"
+msgstr "Elektu grafikan karton"
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Restore Via Network Protocol: %s"
+msgid "LPRng - LPR New Generation"
msgstr ""
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Restore Via Network"
-msgstr "RestaĆ­ru de dosiero"
+msgid "Drakbackup Configuration"
+msgstr "Reta KonfiguraĔo"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr ""
+msgid "Save as.."
+msgstr "Savu Kiel..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore From Tape"
-msgstr "Sava subdiskotabelo"
-
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr ""
+msgid "Korea (North)"
+msgstr "Koreio (Norda)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
-msgstr ""
+msgid "Autologin"
+msgstr "AĆ­tomata-enregistrado"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore From CD"
-msgstr "RestaĆ­ru de disketo"
+#: ../../install_gtk.pm:1
+#, c-format
+msgid "System configuration"
+msgstr "Sistem-konfigurado"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Backup files not found at %s."
+msgid "Domain Admin Password"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#: ../../share/advertising/05-desktop.pl:1
+#, c-format
msgid ""
-"Change\n"
-"Restore Path"
-msgstr "RestaĆ­ru de dosiero"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"Restore Selected\n"
-"Files"
-msgstr "Malinstalu printvicon"
+msgid "Configuring printer ..."
+msgstr "Konfiguru Printilon"
-#: ../../standalone/drakbackup:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Remove user directories before restore."
-msgstr ""
+msgid "MB"
+msgstr "MB"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
+msgid "if set to yes, run some checks against the rpm database."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "select path to restore (instead of /)"
-msgstr "Bonvole, elektu la specon de via muso."
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Other"
-msgstr "RestaĆ­ru de dosiero"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Users"
-msgstr "RestaĆ­ru de dosiero"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore system"
-msgstr "Instalu sistemon"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Other Media"
-msgstr "Alia"
+#: ../../lang.pm:1
+#, c-format
+msgid "Virgin Islands (British)"
+msgstr "Insuloj Virgaj (Britaj)"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Select another media to restore from"
-msgstr "Bonvole, elektu la specon de via muso."
+#: ../../lang.pm:1
+#, c-format
+msgid "Bermuda"
+msgstr "Bermudo"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Please enter the directory where backups are stored"
+msgid "click here if you are sure."
msgstr ""
#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore from Hard Disk."
-msgstr "RestaĆ­ru de disketo"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use quota for backup files."
-msgstr "Malbona rezerva dosiero"
-
-#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
+"No configuration file found \n"
+"please click Wizard or Advanced."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter the directory to save:"
-msgstr "Bonvole, provu la muson"
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use Hard Disk to backup"
-msgstr "Malbona rezerva dosiero"
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#, c-format
+msgid "Remove"
+msgstr "Forigu"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "please choose the date to restore"
-msgstr "Bonvole, elektu la specon de via muso."
+#: ../../lang.pm:1
+#, c-format
+msgid "Lesotho"
+msgstr "Lesoto"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup the system files before:"
-msgstr "Malbona rezerva dosiero"
+#: ../../ugtk2.pm:1
+#, c-format
+msgid "utopia 25"
+msgstr "utopia 25"
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
+msgid "Pipe job into a command"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "OK to restore the other files."
+msgid "new dynamic device name generated by core kernel devfs"
msgstr ""
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Yes"
+msgstr "Jes"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Cote d'Ivoire"
+msgstr "Ebur-Bordo"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "Which protocol do you want to use?"
+msgstr "Kiun protokolon vi deziras uzi?"
+
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid " Restore Configuration "
-msgstr "Reta KonfiguraĔo"
+msgid "Restore Progress"
+msgstr "RestaĆ­ru de dosiero"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid " Successfuly Restored on %s "
-msgstr ""
+msgid "Estonia"
+msgstr "Estonio"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid " All of your selected data have been "
+msgid "Choose the host on which the local scanners should be made available:"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Backup files are corrupted"
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
msgstr ""
+"Vi havas truon en via subdisktabelo sed mi ne povas uzi ĝin.\n"
+"La sola solvo estas movi viajn ĉefajn subdiskojn por situigi la truon\n"
+"apud la etendataj subdiskoj."
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Channel"
+msgstr "Nuligu"
+
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#, c-format
+msgid "Add"
+msgstr "Aldonu"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "Disdividado de Interreta Konekto nuntempe kapabligata"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"
+msgid " Error while sending mail. \n"
+msgstr "Eraro legante dosiero %s"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
+#, c-format
+msgid "Keyboard"
+msgstr "Klavaro"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"List of data corrupted:\n"
-"\n"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"List of data to restore:\n"
-"\n"
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
+msgid "Choose the connection you want to configure"
+msgstr "Elektu la konekton kiun vi deziras konfiguri"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Please wait, setting security level..."
+msgstr "Elektas sekurnivelon"
+
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "\t-Network by webdav.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr ""
+msgid "Configuring network device %s"
+msgstr "Konfiguras retan aparaton %s"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-Network by SSH.\n"
+msgid "activated"
+msgstr "aktiva"
+
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Please choose which network interface will be used for the dhcp server."
msgstr ""
+"Bonvole elektu kiun retadaptilon vi deziras uzi por konekti al la interreto"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr ""
+msgid "Finding packages to upgrade..."
+msgstr "Trovadas pakaĔojn por promocii"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\t-Tape \n"
-msgstr ""
+msgid "Mount point: "
+msgstr "Surmetingo: "
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "\t-CDROM.\n"
+msgid "parse all fonts"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-Hard drive.\n"
+msgid "With X"
+msgstr "Kun X"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "Multi-head configuration"
+msgstr "Plur-ekrana konfiguraĔo"
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "No browser available! Please install one"
msgstr ""
+"Vi povas elektu aliajn lingvojn kiujn estos uzeblaj malantaĆ­ la instalado"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
"\n"
-"- Daemon (%s) include:\n"
+"%s"
msgstr ""
+"Ĉu vi deziras teni la Ɲanĝojn?\n"
+"Nuna konfiguro estas:\n"
+"\n"
+"%s"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "Vi ne povas uzi ReiserFS por subdisko pli malgranda ol 32MB"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "\tBackups use tar and bzip2\n"
+msgid ""
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
+"La rwho protokolo permesas al uzuloj havigi liston de ĉiuj el la uzuloj\n"
+"konektataj ĉe komputilo kiu estas uzanta la rwho dajmono (simila al finger)."
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "\tDo not include System Files\n"
-msgstr ""
+msgid "Domain name"
+msgstr "Domajna nomo"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Opcioj"
+msgid "Sharing of local printers"
+msgstr "Loka printilo"
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"\n"
-"- Save via %s on host: %s\n"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Available printers"
+msgstr "Loka printilo"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\t\tErase=%s"
-msgstr ""
+msgid "Empty"
+msgstr "Malplena"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
-"- Save to Tape on device: %s"
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
+"\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
+"\n"
+"\n"
+"\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid " (multi-session)"
+msgid "text width"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid " on device: %s"
-msgstr "Musaparato: %s\n"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount device %s?"
+msgstr "Kie vi deziras munti aparato %s?"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "RW"
+msgid "The default lease (in seconds)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"- Burn to CD"
-msgstr ""
+msgid "Interface \"%s\""
+msgstr "Interfaco \"%s\""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
+msgid "With basic documentation (recommended!)"
+msgstr "Kun baza dokumentaĔo (rekomendita!)"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
+msgid "1 button"
+msgstr "1 butona"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"- Other Files:\n"
+"There are %d unknown printers directly connected to your system"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
+msgid "Test"
+msgstr "Testo"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"- System Files:\n"
+"Allow/Forbid direct root login."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
+msgid "Korea"
+msgstr "Koreio"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Select user manually"
-msgstr ""
+msgid "Your choice? (default `%s'%s) "
+msgstr "Via elekto? (defaĆ­lto '%s'%s) "
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Raw printer"
+msgstr "Neniu printilo"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Backup Users"
+msgid "official vendor name of the cpu"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup system"
-msgstr "Dosiersistemo konfiguro"
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Vendor"
+msgstr "Vendinto"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please choose what you want to backup"
-msgstr "Bonvole, elektu la pakaĔojn kiujn vi deziras instali."
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Interface %s"
+msgstr "Interfaco %s"
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "on Tape Device"
-msgstr ""
+msgid "Configure mouse"
+msgstr "Konfiguru muson"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "on CDROM"
-msgstr ""
+msgid "Choose the mount points"
+msgstr "Elektu surmetingojn"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "across Network"
-msgstr ""
+msgid "OK"
+msgstr "Jes"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "on Hard Drive"
-msgstr ""
+msgid "Yugoslavian (latin)"
+msgstr "Jugoslava (latina)"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please choose where you want to backup"
-msgstr "Bonvole, elektu la pakaĔojn kiujn vi deziras instali."
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Installing"
+msgstr "Instalanta"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "More Options"
-msgstr "Modulaj opcioj:"
+#: ../../any.pm:1
+#, c-format
+msgid "Launch userdrake"
+msgstr "Lanĉu userdrake"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "When"
-msgstr "Rado"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Is this an install or an upgrade?"
+msgstr "Ĉu tiu ĉi estas instalado aƭ ĝisdatigo?"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Where"
-msgstr "Rado"
+msgid "ISDN card"
+msgstr "Interna ISDN-karto"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "What"
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
+msgid ""
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
+"\n"
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Send mail report after each backup to:"
+msgid "\t-Hard drive.\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
"\n"
-"Note that currently all 'net' medias also use the hard drive."
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Bonvole, elektu lingvon por uzi."
+msgid "Printer on remote CUPS server"
+msgstr "Malproksima CUPS-a servilo"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Bonvole, elektu la pakaĔojn kiujn vi deziras instali."
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Use daemon"
-msgstr "Salutnomo"
+msgid "delete"
+msgstr "Forigu"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "monthly"
+msgid "here if no."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "DHCP host name"
+msgstr "PoƝtejo"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid "weekly"
+msgid "The maximum lease (in seconds)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "daily"
-msgstr ""
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "Bonvole, elektu al kiu seria pordo estas via muso konektata."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "hourly"
+msgid "Did it work properly?"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
#, c-format
-msgid "HardDrive / NFS"
-msgstr ""
+msgid "Poor"
+msgstr "Malbona"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "CDROM / DVDROM"
+msgid "The DHCP start range"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter the directory to save to:"
-msgstr "Bonvole, provu la muson"
+#: ../../lang.pm:1
+#, c-format
+msgid "Grenada"
+msgstr "Grenado"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr "Bonvole, elektu la pakaĔojn kiujn vi deziras instali."
+#: ../../any.pm:1
+#, c-format
+msgid "Unsafe"
+msgstr "Danĝera"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr "Bonvole, elektu la pakaĔojn kiujn vi deziras instali."
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid ", %s sectors"
+msgstr ", %s sektoroj"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "Bonvole, elektu la pakaĔojn kiujn vi deziras instali."
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "No"
+msgstr "Ne"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please enter the device name to use for backup"
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use tape to backup"
-msgstr "Malbona rezerva dosiero"
+#: ../../lang.pm:1
+#, c-format
+msgid "Guadeloupe"
+msgstr "Gvadelupo"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "No CD device defined!"
-msgstr "Elektu dosieron"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "could not find any font.\n"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
+msgid "Do you want the BackSpace to return Delete in console?"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "Bonvolu klaki sur subdiskon"
+#: ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Vertical refresh rate"
+msgstr "Vertikala refreƝigrapido (vertical refresh rate)"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "Bonvolu klaki sur subdiskon"
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#, c-format
+msgid "Entering step `%s'\n"
+msgstr "Eniras paƝon `%s'\n"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid " Erase Now "
-msgstr ""
+msgid "Logitech MouseMan"
+msgstr "Loĝiteka MouseMan"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "Bonvolu klaki sur subdiskon"
+msgid "Removing %s ..."
+msgstr "Distingivo: %s\n"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "Bonvolu klaki sur subdiskon"
+#: ../../lang.pm:1
+#, c-format
+msgid "Niger"
+msgstr "Niĝero"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check for multisession CD"
-msgstr "Bonvolu klaki sur subdiskon"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No printer"
+msgstr "Neniu printilo"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "Bonvole, elektu vian klavaran aranĝon."
+msgid "alert configuration"
+msgstr "Interreta Konfigurado"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
-msgstr ""
+msgid "NetWare Printer Options"
+msgstr "NetWare Printilaj Opcioj"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Use CD/DVDROM to backup"
+msgid "%s BootSplash (%s) preview"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Need hostname, username and password!"
-msgstr ""
+msgid "General"
+msgstr "Ĝenerala"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Remember this password"
-msgstr "Neniu pasvorto"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing system: "
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter your password"
-msgstr "Bonvole provu denove"
+#: ../../steps.pm:1
+#, c-format
+msgid "Add a user"
+msgstr "Aldonu uzulon"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Please enter your login"
-msgstr "Bonvole provu denove"
+msgid "Network configuration (%d adapters)"
+msgstr "ISDN-a KonfiguraĔon"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
+msgid "Mandatory package %s is missing"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter the host name or IP."
-msgstr "Bonvole, provu la muson"
+#: ../../lang.pm:1
+#, c-format
+msgid "Philippines"
+msgstr "Filipinoj"
-#: ../../standalone/drakbackup:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
#, c-format
-msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
-msgstr ""
+msgid "Ok"
+msgstr "Jeso"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-" Transfer \n"
-"Now"
-msgstr ""
+msgid "Print Queue Name"
+msgstr "Printvica Nomo"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "Ĉu vi deziras uzi aboot-on?"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "Belarusa"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Use Expect for SSH"
-msgstr ""
+msgid "Move files to the new partition"
+msgstr "Movu dosierojn al la nova subdisko"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Net Method:"
+msgid ""
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
msgstr ""
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Use network connection to backup"
-msgstr "Malbona rezerva dosiero"
+msgid "Restore From Catalog"
+msgstr "Sava subdiskotabelo"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Users"
-msgstr "Salutnomo"
+#: ../../lang.pm:1
+#, c-format
+msgid "Pitcairn"
+msgstr "Pitkarna Insulo"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "IDE"
+msgstr "IDE"
+
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Windows (FAT32)"
-msgstr "Forigu Vindozon"
+msgid "group :"
+msgstr "Laborgrupo"
-#: ../../standalone/drakbackup:1
+#: ../../fs.pm:1
#, c-format
-msgid "Use Incremental Backups (do not replace old backups)"
+msgid "mounting partition %s in directory %s failed"
msgstr ""
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Remove Selected"
-msgstr "Malinstalu printvicon"
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Lilo screen"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid "Do not include the browser cache"
+msgid "LILO with graphical menu"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Estimating"
+msgstr "Taksas"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "You can't unselect this package. It is already installed"
+msgstr "Vi ne povas malelekti ĉi tiun pakaÄ”on. Ĝi estas jam instalita."
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "Bonvole, elektu la pakaĔojn kiujn vi deziras instali."
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "SMB/Vindozo 95/98/NT"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
+msgid "Go on anyway?"
+msgstr "Ĉu vi deziras daƭri tamen?"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "Serĉas haveblajn pakaÄ”ojn kaj refaras la rpm-datenbazon..."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use incremental backup (do not replace old backups)"
+msgid "Does not appear to be recordable media!"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Malbona rezerva dosiero"
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "Specify options"
+msgstr "Specifu opciojn"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
+msgid "Vanuatu"
+msgstr "Vanuatuo"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Either the server name or the server's IP must be given!"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
"\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
msgstr ""
+"Akomodita startdisketo provizas manieron de starti via Linuksa sistemo\n"
+"sendepende de la normala startƝargilo. Ĉi tiu estas utila se vi ne deziras\n"
+"instali SILO sur via sistemo, aĆ­ alia mastruma sistemo forigas SILO,\n"
+"aƭ SILO ne funkcias kun via aparato-konfiguraĔo. Akomodita startdisketo "
+"ankaĆ­\n"
+"povas esti uzata kun la Mandrejka savdisko, kiu plifaciligas resaniĝi de\n"
+"severaj sistemaj paneoj.\n"
+"\n"
+"Se vi deziras krei startdisketon por via sistemo, enƝovu disketon en la\n"
+"unua drajvo kaj klaku \"JES\"."
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "File Selection"
-msgstr "Elektado de PakaĔoj"
+msgid "You can't use an encrypted file system for mount point %s"
+msgstr "Vi ne povas uzi kriptan dosiersistemon por surmetingo %s"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Can't create catalog!"
-msgstr ""
+msgid "Norfolk Island"
+msgstr "Norfolkaj Insuloj"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, fuzzy, c-format
-msgid " Error while sending mail. \n"
-msgstr "Eraro legante dosiero %s"
+msgid "Theme installation failed!"
+msgstr "Elektu instalklason"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
+msgid "Nothing to do"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
+msgid "Use for loopback"
+msgstr "Uzu por retrokonektado"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
+msgid "use pppoe"
+msgstr "uzu pppoe"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"file list sent by FTP: %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "No changes to backup!"
-msgstr "Malbona rezerva dosiero"
+msgid "Moving files to the new partition"
+msgstr "Mi movas dosierojn al la nova subdisko"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Malbona rezerva dosiero"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s kun EKSPERIMENTA 3D aparata akcelado"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Other files..."
-msgstr "Malbona rezerva dosiero"
+#: ../../help.pm:1 ../../interactive.pm:1
+#, c-format
+msgid "Advanced"
+msgstr "Progresinta"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hard Disk Backup Progress..."
+msgid "Transfer"
msgstr ""
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak-a (Sveda)"
+
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Backup User files..."
-msgstr "Malbona rezerva dosiero"
+msgid "More Options"
+msgstr "Modulaj opcioj:"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Backup system files..."
-msgstr ""
+msgid "Afghanistan"
+msgstr "Afganistano"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "No tape in %s!"
+msgid "Delete Hard Drive tar files after backup to other media."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Permission problem accessing CD."
+msgid ""
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
msgstr ""
+"cron estas norma Uniksa programo kiu lanĉas programojn kiujn la uzulo\n"
+"specifas je periodaj tempoj. vixie cron aldonas kelkajn trajtojn al la\n"
+"baza Uniksa cron, inkluzive de pli bona sekureco kaj pli fortaj\n"
+"konfiguraj opcioj."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "This may take a moment to erase the media."
-msgstr ""
+msgid "Burundi"
+msgstr "Burundo"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Not erasable media!"
+msgid "Add Client -->"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr ""
+msgid "Read carefully!"
+msgstr "Legu zorge"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "No CDR/DVDR in drive!"
+msgid "RW"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "WebDAV transfer failed!"
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "WebDAV remote site already in sync!"
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Total progess"
-msgstr "Provu pordojn"
+msgid "Port"
+msgstr "Pordo"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
-"\n"
-"without being prompted for a password."
+msgid "No (experts only)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "%s not responding"
+msgid "No kernel selected!"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Can't find %s on %s"
-msgstr "Ne povis malfermi %s por skribi: %s\n"
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
+#, c-format
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr ""
+"Premu la enenklavon por starti la elektatan mastruman sistemon, 'e' por\n"
+"redakti la"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Permission denied transferring %s to %s"
+msgid "Set-GID"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Bad password on %s"
-msgstr "Neniu pasvorto"
+msgid "The encryption keys do not match"
+msgstr "La pasvortoj ne egalas"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr ""
+msgid "Right \"Windows\" key"
+msgstr "Dekstra \"Vindozo\"-klavo"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "ERROR: Cannot spawn %s."
+msgid "CDROM / DVDROM"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "This may take a moment to generate the keys."
+msgid "if set to yes, check empty password in /etc/shadow."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"%s exists, delete?\n"
-"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
+"Here is a list of the available printing options for the current printer:\n"
"\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolutions"
+msgstr "Distingivoj"
+
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
+"drakfirewall configurator\n"
"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
+"Please enter your username, password and domain name to access this host."
msgstr ""
+"Bonvole tajpu vian uzulnomon, pasvorton kaj domajn-nomon por aliri al tiu "
+"gastiganto."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Remove selected host"
+msgstr "Malinstalu printvicon"
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "INFO"
+msgid "Network configuration"
+msgstr "Reta KonfiguraĔo"
+
+#: ../../any.pm:1
+#, c-format
+msgid "No sharing"
+msgstr "Ne kundivido"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule down one level"
msgstr ""
+#: ../../common.pm:1
+#, c-format
+msgid "TB"
+msgstr "TB"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you are using a DVDR device"
+msgstr "Bonvolu klaki sur subdiskon"
+
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "FATAL"
msgstr "Dosierlokigtabelo (FAT)"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "WARNING"
+msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
+"\n"
+"The network address is %s using a netmask of %s.\n"
+"\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cron not available yet as non-root"
-msgstr ""
+msgid "Delete"
+msgstr "Forigu"
-#: ../../standalone/drakboot:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Instalado de %s malsukcesis. La sekvanta eraro okazis:"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid reboot by the console user."
+msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "No, I don't want autologin"
+msgid ""
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
msgstr ""
+"Mi povas konfiguri vian komputilon tiel ke ĝi aƭtomate lanĉos X kiam ĝi\n"
+"ekfunkcias. Ĉu vi deziras ke X aƭtomate lanĉos?"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
+msgid "Build the disk"
+msgstr "Konstruu la diskon"
-#: ../../standalone/drakboot:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnect %s"
+msgstr "Malkonektu"
+
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr ""
+msgid "Status:"
+msgstr "Stato:"
-#: ../../standalone/drakboot:1
+#: ../../network/network.pm:1
#, c-format
-msgid "System mode"
-msgstr "Sistema modalo"
+msgid "HTTP proxy"
+msgstr "HTTP prokura servilo"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "SSH Server"
+msgstr "NIS Servilo"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bootsplash"
+msgid "\t-Network by rsync.\n"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Lilo screen"
-msgstr ""
+msgid "European protocol"
+msgstr "EĆ­ropa protokolo"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
+msgid ", printer \"%s\" on server \"%s\""
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
#, c-format
-msgid "Themes"
-msgstr "Temoj"
+msgid "Error"
+msgstr "Eraro"
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid "Splash selection"
-msgstr "Elektado de individuaj pakaĔoj"
+#: ../../any.pm:1
+#, c-format
+msgid "allow \"su\""
+msgstr "permesu \"su\""
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Disdividado de Interreta Konekto"
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#, c-format
+msgid "Australia"
+msgstr "Auxstralio"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
+msgid "please wait during ttmkfdir..."
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "Configure only card \"%s\"%s"
+msgstr "Konfiguru nur karton \"%s\"%s"
+
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Theme installation failed!"
-msgstr "Elektu instalklason"
+msgid "Level"
+msgstr "nivelo"
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Notice"
-msgstr "agrabla(j)"
+msgid "Change the printing system"
+msgstr "Konfiguru retumon"
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Relaunch 'lilo'"
+msgid ""
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
msgstr ""
+"Via sistemo subtenas multkapo-konfiguradon.\n"
+"Kion vi deziras fari?"
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
-msgstr ""
+msgid "Configure services"
+msgstr "Konfiguru servojn"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+msgid "Broadcast Address:"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr ""
+msgid "mount failed: "
+msgstr "muntado malsukcesis: "
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
msgstr ""
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid "Write %s"
-msgstr "XFree %s"
-
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr ""
+msgid "Image"
+msgstr "Kerna bildo"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lilo message not found"
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
#, c-format
-msgid "Copy %s to %s"
-msgstr ""
+msgid "Remote Administration"
+msgstr "Malproksima administrado"
-#: ../../standalone/drakboot:1
+#: ../../modules.pm:1
#, c-format
-msgid "Backup %s to %s.old"
-msgstr ""
+msgid ""
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+msgstr "PCMCIA-subteno ne ekzistas plu por 2.2-kernoj. Bonvole uzu 2.4-kernon."
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Create new theme"
-msgstr "Kreu novan subdiskon"
+msgid "Selected All"
+msgstr "Elektu dosieron"
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Display theme\n"
-"under console"
+msgid "CUPS - Common Unix Printing System"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Install themes"
-msgstr "Instalu sistemon"
+msgid "Webmin Service"
+msgstr "Servilo"
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub modalo"
+msgid "device"
+msgstr "aparato"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Yaboot mode"
-msgstr "Yaboot modalo"
+msgid "All"
+msgstr "Ĉiuj"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "Kiun printsistemo vi deziras uzi?"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "/File/_Quit"
-msgstr "/Dosiero/_Foriru"
+msgid "Greece"
+msgstr "Grekio"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "/_File"
-msgstr "/_Dosiero"
-
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid "Boot Style Configuration"
-msgstr "Post-instala konfigurado"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "No browser available! Please install one"
-msgstr ""
-"Vi povas elektu aliajn lingvojn kiujn estos uzeblaj malantaĆ­ la instalado"
+msgid "An error occurred"
+msgstr "Eraro okazis"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "connecting to Bugzilla wizard ..."
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
msgstr ""
+"Ĉi tiu pakaĔo devus esti promociata.\n"
+"Ĉu vi certas ke vi deziras malelekti ĝin?"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Package not installed"
-msgstr "Eliru instalprogramon"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Tamil (Typewriter-layout)"
+msgstr "Tamila (skribmaƝina)"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Not installed"
-msgstr "Eliru instalprogramon"
+#: ../../standalone/drakautoinst:1
+#, c-format
+msgid "manual"
+msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Standalone Tools"
+msgid "Printer manufacturer, model, driver"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
-msgid "Report"
-msgstr "porto"
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"Ne estas medio en aparato %s.\n"
+"Bonvole enƝovu ĝin."
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
-"\n"
+"Directory %s already contains data\n"
+"(%s)"
msgstr ""
+"Dosierujo %s entenas jam datenojn\n"
+"(%s)"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Release: "
-msgstr "Bonvole atendu"
+msgid "Printer on NetWare server"
+msgstr "Printservilo"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Kernel:"
-msgstr ""
+msgid "Give the ram size in MB"
+msgstr "Donu kvanton de memoro en MB"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Package: "
-msgstr "Elektado de PakaĔoj"
+#: ../../any.pm:1
+#, c-format
+msgid "Real name"
+msgstr "Vera nomo"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Application:"
-msgstr "AĆ­tentikigado"
+msgid "done"
+msgstr "Finata"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Configuration Wizards"
-msgstr "ISDN-a KonfiguraĔon"
+msgid "Please uncheck or remove it on next time."
+msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Userdrake"
-msgstr "Printilo"
+msgid "Higher"
+msgstr "Alta"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Windows Migration tool"
-msgstr ""
+msgid "Choose the partitions you want to format"
+msgstr "Elektu la subdiskoj kiuj vi deziras formati"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Urpmi"
+msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Software Manager"
-msgstr "Opuza nomo"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Remote Control"
-msgstr "Malproksima printilo"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Msec"
-msgstr "Muso"
-
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Menudrake"
-msgstr "Spertulo"
+msgid "Can't find %s on %s"
+msgstr "Ne povis malfermi %s por skribi: %s\n"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Mandrake Online"
-msgstr "Konekti al la interreto"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Japanese 106 keys"
+msgstr "Japana 106 klavoj"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "HardDrake"
+msgid "This will take a few minutes."
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Synchronization tool"
+msgid "Burkina Faso"
+msgstr "Burkino"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Use scanners on remote computers"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "First Time Wizard"
-msgstr "Bonvenon al Unuafoja Sorĉilo"
+msgid "Delete selected rule"
+msgstr "Malinstalu printvicon"
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Mandrake Control Center"
-msgstr "Konekti al la interreto"
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Malproksima CUPS-a servilo"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Mandrake Bug Report Tool"
-msgstr ""
+msgid "Insert a floppy in %s"
+msgstr "EnƝovu disketon en %s"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Parameters"
-msgstr ""
-
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "Internet Connection Configuration"
-msgstr "Interreta konektaĔo kaj konfiguro"
+msgid "Maldives"
+msgstr "Maldivoj"
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "DHCP Client"
-msgstr ""
+msgid "compact"
+msgstr "kompakta"
-#: ../../standalone/drakconnect:1
+#: ../../common.pm:1
#, c-format
-msgid "Ethernet Card"
-msgstr ""
+msgid "1 minute"
+msgstr "1 minuto"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Gateway"
-msgstr "Kluzo"
+msgid "on channel %d id %d\n"
+msgstr "ĉe kanalo %d identigaÄ”o %d\n"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Connection type: "
-msgstr "Speco de konekto"
-
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "Profile: "
-msgstr "muntado malsukcesis: "
-
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "Internet connection configuration"
-msgstr "Interreta konektaĔo kaj konfiguro"
+msgid ", multi-function device"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
+msgid "Laos"
+msgstr "Laoso"
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
+msgid "There is no FAT partition to resize (or not enough space left)"
msgstr ""
+"Ne ekzistas FAT-a subdisko por regrandecigi\n"
+"(aƭ ne estas sufiĉe da spaco)"
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "activate now"
-msgstr "Aktiva"
-
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "deactivate now"
-msgstr "Aktiva"
-
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "DHCP client"
+msgid "Up"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Started on boot"
+msgid "Firewall"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Boot Protocol"
+msgid "Area:"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptilo %s: %s"
+msgid "(E)IDE/ATA controllers"
+msgstr "(E)IDE/ATA-kontroliloj"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "LAN Configuration"
-msgstr "LAN KonfiguraĔo"
+msgid "Printer Server"
+msgstr "Printservilo"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "LAN configuration"
-msgstr "LAN KonfiguraĔo"
+msgid "Disconnection from the Internet complete."
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Custom configuration"
+msgstr "Interreta Konfigurado"
+
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connect..."
-msgstr "Konektu..."
+msgid "Saint Pierre and Miquelon"
+msgstr "Sanpetro-kaj-Mikelono"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Disconnect..."
-msgstr "Malkonektu..."
+msgid ""
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
+msgstr ""
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Not connected"
-msgstr "Ne konektita"
+msgid "saving Bootsplash theme..."
+msgstr ""
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connected"
-msgstr "Konektita"
+msgid "Portugal"
+msgstr "Portugalujo"
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
+msgid "Do you have another one?"
+msgstr "Ĉu vi havas alian?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
+#, c-format
+msgid ", printing to %s"
+msgstr ", presante sur %s"
+
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "Interface:"
-msgstr "Interreto"
+msgid "Assign host name from DHCP address"
+msgstr "Bonvole, provu la muson"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Gateway:"
-msgstr "Kluzo:"
+msgid "Toggle to normal mode"
+msgstr "Ɯanĝu al Normala reĝimo"
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Apply"
-msgstr "Apliku"
+msgid "Generic"
+msgstr "Genera"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Click here to launch the wizard ->"
-msgstr ""
+msgid "Cylinder %d to %d\n"
+msgstr "cilindro %d ĝis cilindro %d\n"
#: ../../standalone/drakconnect:1
#, c-format
-msgid "Wizard..."
-msgstr "Sorĉisto..."
+msgid "New profile..."
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Status:"
-msgstr "Stato:"
+msgid "Which disk do you want to move it to?"
+msgstr "Al kiu disko vi deziras movi?"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Type:"
-msgstr "Speco:"
-
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "Internet access"
-msgstr "Interreto"
+msgid "Display logo on Console"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Hostname: "
-msgstr "PoƝtejo: "
-
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "Configure Local Area Network..."
-msgstr "Konfiguru lokan reton"
+msgid "Windows Domain"
+msgstr "Vindozo Domajno"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "State"
-msgstr "Stato:"
+msgid "Interface %s (on network %s)"
+msgstr "Interfaco %s"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Driver"
-msgstr "Pelilo"
+msgid "INFO"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Protocol"
-msgstr "Protokolo"
+msgid "Wallis and Futuna"
+msgstr "valis-kaj-futuna"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Interface"
-msgstr "Interfaco"
+msgid "Need to create /etc/dhcpd.conf first!"
+msgstr ""
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "Configure Internet Access..."
-msgstr "Konfiguru servojn"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Is FPU present"
+msgstr ""
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Wait please"
+msgid "There are no scanners found which are available on your system.\n"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
+"No additional information\n"
+"about this service, sorry."
msgstr ""
+"Ne pli da informo\n"
+"pri tiu servo, bedaĆ­rinde."
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "New profile..."
+msgid "Build Single NIC -->"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Profile to delete:"
-msgstr ""
+msgid "Is this correct?"
+msgstr "Ĉu tio ĉi pravas?"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Del profile..."
-msgstr ""
+msgid "Marshall Islands"
+msgstr "Insuloj MarƝalaj"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "ISDN-a KonfiguraĔon"
+msgid "Windows (FAT32)"
+msgstr "Forigu Vindozon"
-#: ../../standalone/drakedm:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
+msgid "Root password"
+msgstr "Root-pasvorto"
-#: ../../standalone/drakedm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Choosing a display manager"
+msgid "Build All Kernels -->"
msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
+msgid "if set to yes, report unowned files."
msgstr ""
-"Ne povis ĝuste fermi mkbootdisk-on: \n"
-" %s \n"
-" %s"
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Unable to fork: %s"
-msgstr "Ne povis forki: %s"
-
-#: ../../standalone/drakfloppy:1
-#, fuzzy, c-format
msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
msgstr ""
-"Ne estas medio en aparato %s.\n"
-"Bonvole enƝovu ĝin."
+"Vi ne havas interƝanĝan subdiskon\n"
+"\n"
+"Ĉu vi deziras daƭri tamen?"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Server IP missing!"
+msgstr "Printilaj PoƝtejo"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "Kontrolu ke medio estas en la aparato %s"
+msgid "Suriname"
+msgstr "Surinamo"
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
#, c-format
-msgid "Build the disk"
-msgstr "Konstruu la diskon"
+msgid "Enable ACPI"
+msgstr "Ebligu ACPI"
-#: ../../standalone/drakfloppy:1
+#: ../../help.pm:1
#, c-format
-msgid "Output"
-msgstr "Skribu"
+msgid "Graphical Environment"
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remove a module"
-msgstr "Forprenu modulon"
+msgid "Gibraltar"
+msgstr "Ĝibraltaro"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add a module"
-msgstr "Aldonu modulon"
+msgid "on Tape Device"
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "omit scsi modules"
-msgstr "forlasu SCSI-ajn modulojn"
+msgid "Do nothing"
+msgstr "Faru nenion"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Delete Client"
+msgstr "Forigu"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if needed"
-msgstr "se bezonata"
+msgid "Filesystem type: "
+msgstr "Speco de dosiersistemo: "
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Starting network..."
+msgstr "Startas vian konektaĔon..."
+
+#: ../../lang.pm:1
#, c-format
-msgid "omit raid modules"
-msgstr "forlasu RAID-ajn modulojn"
+msgid "Vietnam"
+msgstr "Vjetnamio"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/_Fields description"
+msgstr "Priskribo"
+
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "force"
-msgstr "devigu"
+msgid "Optimize your security by using Mandrake Linux"
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "mkinitrd optional arguments"
-msgstr "mkinitrd opciaj argumentoj"
+msgid "Help"
+msgstr "Helpo"
-#: ../../standalone/drakfloppy:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Expert Area"
-msgstr "Spertulejo"
+msgid "Your personal phone number"
+msgstr "Via persona telefonnumero"
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "kernel version"
-msgstr "Kerna versio"
+msgid "Which size do you want to keep for Windows on"
+msgstr "Kiun grandecon vi deziras teni por Vindozo?"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+msgstr ""
+"Provpaĝo(j)n estis sendataj al la printila demono.\n"
+"Ĉi tiu eble postulas iom da tempo antaƭ ol la printilo komencas.\n"
+"Ĉu ĝi ĝuste funkcias?"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Username required"
+msgstr "Salutnomo"
+
+#: ../../help.pm:1
#, c-format
-msgid "default"
-msgstr "defaĆ­lta"
+msgid ""
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "General"
-msgstr "Ĝenerala"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "SMB (Vindozo 9x/NT) Printilaj Opcioj"
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
-msgid "boot disk creation"
-msgstr "Startdiskokreado"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
#: ../../standalone/drakfloppy:1
#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "mkinitrd optional arguments"
+msgstr "mkinitrd opciaj argumentoj"
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Size"
-msgstr "Grandeco"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Module name"
-msgstr "Modulonomo"
+msgid "Protocol for the rest of the world"
+msgstr "Protokolo por la cetera mondo"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Post Uninstall"
-msgstr "Eliru instalprogramon"
+msgid "Print test pages"
+msgstr "Printas provpaĝo(j)n..."
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Remove fonts on your system"
-msgstr "Via komputilo ne havas retadaptilon!"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "64 MB or more"
+msgstr "64 MB aĆ­ pli"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Initial tests"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Post Install"
-msgstr "Instalu"
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Please select the device where your %s is attached"
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Install & convert Fonts"
+msgid "Not formatted\n"
+msgstr "Ne formatita\n"
+
+#: ../../standalone/draksec:1
+#, c-format
+msgid "Periodic Checks"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "Copy fonts on your system"
-msgstr "Via komputilo ne havas retadaptilon!"
+msgid "PXE Server Configuration"
+msgstr "LAN KonfiguraĔo"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Remove List"
-msgstr "Malproksima printilo"
+msgid "Backup the system files before:"
+msgstr "Malbona rezerva dosiero"
-#: ../../standalone/drakfont:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Selected All"
-msgstr "Elektu dosieron"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"Ĉi tiu estas la normala sekureco rekomendata por komputilo kiu estos uzata\n"
+"por konekti al la Interreto kiel kliento. Nun estas sekurecaj kontroloj."
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Unselected All"
+msgid "First floppy drive"
+msgstr "Unua disketa drajvo"
+
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "/File/_Quit"
+msgstr "/Dosiero/_Foriru"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak"
+msgstr "Dvorak-a"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Choose the new size"
+msgstr "Elektu la novan grandecon"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Media class"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "here if no."
+msgid "The %s is not known by this version of Scannerdrake."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "click here if you are sure."
+msgid "Faroe Islands"
msgstr ""
#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Install List"
-msgstr "Instalu sistemon"
+msgid "Restart XFS"
+msgstr "limigu"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
+msgid "Add host/network"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Generic Printers"
-msgstr "Printilo"
+msgid "Please enter the directory to save to:"
+msgstr "Bonvole, provu la muson"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Abiword"
-msgstr "Ĉesigu"
+msgid "Model name"
+msgstr "Modulonomo"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "StarOffice"
-msgstr "Oficejo"
+#: ../../lang.pm:1
+#, c-format
+msgid "Albania"
+msgstr "Albanio"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Ghostscript"
+msgid "No CDR/DVDR in drive!"
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Elektu la subdiskoj kiuj vi deziras formati"
+#: ../../lang.pm:1
+#, c-format
+msgid "British Indian Ocean Territory"
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "Normal Mode"
+msgstr "Normala Modalo"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
+"Please be sure that the cron daemon is included in your services. \n"
"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
+"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "About"
-msgstr "Ĉesigu"
+msgid "Printer connection type"
+msgstr "Disdividado de Interreta Konekto"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Font List"
-msgstr "Surmetingo"
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#, c-format
+msgid "No network adapter on your system!"
+msgstr "Via komputilo ne havas retadaptilon!"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Advanced Options"
-msgstr "LAN KonfiguraĔo"
+#: ../../printer/main.pm:1
+#, c-format
+msgid "Network %s"
+msgstr "Reto %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Uninstall Fonts"
-msgstr ""
+msgid "Malayalam"
+msgstr "Malajalama"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Get Windows Fonts"
+msgid "Option %s out of range!"
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Import Fonts"
-msgstr "Formatu subdiskojn"
-
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "done"
-msgstr "Finata"
+msgid "Connect %s"
+msgstr "Konektu"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "xfs restart"
+msgid "Restarting CUPS..."
msgstr "limigu"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Suppress Fonts Files"
-msgstr ""
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "Presanta/skananta foton karton per \"%s\""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Restart XFS"
-msgstr "limigu"
+#: ../../install_steps.pm:1
+#, c-format
+msgid "Duplicate mount point %s"
+msgstr "Duobla surmetingo %s"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Suppress Temporary Files"
+msgid "if set to yes, run chkrootkit checks."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "type1inst building"
-msgstr ""
+msgid "Connection Configuration"
+msgstr "Konfigurado de Konekto"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "pfm fonts conversion"
-msgstr ""
+msgid "Unknown|Generic"
+msgstr "Nekonata|Genera"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1
#, c-format
-msgid "ttf fonts conversion"
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Ghostscript referencing"
-msgstr ""
+msgid "Quit"
+msgstr "Ĉesu"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Fonts conversion"
-msgstr ""
+msgid "Myanmar"
+msgstr "Mianmaro"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "True Type install done"
-msgstr ""
+msgid "Auto allocate"
+msgstr "AĆ­tomate disponigu"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr ""
+msgid "Check bad blocks?"
+msgstr "Ĉu kontrolas malbonajn blokojn?"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Other MultiMedia devices"
+msgstr "Alia bildson-aparatoj"
+
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "True Type fonts installation"
-msgstr "Preparas instaladon"
+msgid "No remote machines"
+msgstr "Malproksima printilo"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Fonts copy"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Search for fonts in installed list"
-msgstr ""
+msgid "Authentication NIS"
+msgstr "AĆ­tentikiga NIS"
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "could not find any font.\n"
-msgstr ""
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr "Opcio ``Limigu komandliniajn opciojn'' ne estas utila sen pasvorto"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Reselect correct fonts"
-msgstr ""
+msgid "Internet Connection Sharing currently enabled"
+msgstr "Disdividado de Interreta Konekto nuntempe kapabligata"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr ""
+msgid "Card IO_0"
+msgstr "I/O 0 (Eneligo 0) de Karto"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "no fonts found"
-msgstr "neniu retkarto trovita"
+#: ../../lang.pm:1
+#, c-format
+msgid "United Arab Emirates"
+msgstr "Unuiĝintaj Arabaj Emirlandoj"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "parse all fonts"
+msgid "Card IO_1"
+msgstr "I/O 1 (Eneligo 1) de Karto"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Thailand"
+msgstr "Tajlando"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Routers:"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unselect fonts installed"
+msgid "Kazakhstan"
+msgstr "KazaĄstano"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Display all available remote CUPS printers"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../install_steps_newt.pm:1
#, c-format
-msgid "Search installed fonts"
+msgid "Mandrake Linux Installation %s"
+msgstr "Linuks-Mandrejka Instalado %s"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Thai keyboard"
+msgstr "Taja klavaro"
+
+#: ../../network/modem.pm:1
+#, c-format
+msgid "Dialup options"
+msgstr "Telefon-konektaj opcioj"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Bouvet Island"
+msgstr "Buvet-Insulo"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "If no port is given, 631 will be taken as default."
msgstr ""
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
+"Change your Cd-Rom!\n"
"\n"
-"%s\n"
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
+msgstr ""
+"Ɯanĝu vian KDROM!\n"
"\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Disdividado de Interreta Konekto"
+"Bonvole, enƝovu la KDROM-on etikedatan \"%s\" en via drajvo kaj klaku \"Jes"
+"\"\n"
+"kiam vi finos.\n"
+"Se vi ne havas ĝin, klaku \"Nuligu\" por eviti la instaladon de ĉi tiu KDROM."
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "Interreta konektaĔo kaj konfiguro"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Polish"
+msgstr "Pola"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Disdividado de Interreta Konekto nuntempe kapabligata"
+msgid "Mandrake Online"
+msgstr "Konekti al la interreto"
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "The setup has already been done, and it's currently enabled."
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t-Network by webdav.\n"
msgstr ""
-"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "The setup has already been done, but it's currently disabled."
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#, c-format
+msgid ""
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
msgstr ""
-"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"
+"Mi ne detektas eterretan retadaptilom sur via sistemo. Bonvole lanĉu la\n"
+"aparatokonfigurilon."
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
+msgid "Netmask"
+msgstr "Retmasko"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemoj instalante pakaĔon %s"
+msgid "No hard drives found"
+msgstr "Neniaj durdiskoj trovitaj"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Mi konfiguras komandodosierojn, instalas programojn, startas servilojn..."
+msgid "Logitech CC Series"
+msgstr "Loĝiteka CC serio"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring..."
-msgstr "Mi konfiguras..."
+msgid "2 buttons"
+msgstr "2 butonoj"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Ebla konflikto pri Loka-Reta adreso trovata en nuna konfiguro de %s!\n"
+msgid "What kind is your ISDN connection?"
+msgstr "Kia estas via ISDN-a konektaĔo?"
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
+msgid "Label"
+msgstr "Etikedo"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr ""
+msgid "Save on floppy"
+msgstr "Konservu sur disketo"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer auto-detection"
+msgstr "Malproksima printilo"
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr ""
+msgid "Which of the following is your ISDN card?"
+msgstr "Kiu el la sekvaj estas via ISDN-karto?"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
-msgid "The default lease (in seconds)"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
msgstr ""
+"NFS estas populara protokolo por dosierdistribuado tra TCP/IP retoj.\n"
+"Ĉi tiu servo provizas NFS dosierƝlosado, kiun vi konfiguras per la\n"
+"/etc/exports dosiero."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Msec"
+msgstr "Muso"
+
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "The DHCP end range"
+msgid ""
+"=> Notice, a label changed:\n"
+"%s"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "The DHCP start range"
+msgid "Number of capture buffers:"
msgstr ""
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "The internal domain name"
-msgstr "Neniu printilo"
-
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "The DNS Server IP"
-msgstr "IP de SMB servilo"
-
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "(This) DHCP Server IP"
-msgstr "IP de SMB servilo"
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Your choice? (0/1, default `%s') "
+msgstr "Via elekto? (0/1, defaĆ­lo '%s') "
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"DHCP Server Configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
+"\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
+"\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
"\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
+"\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "French"
+msgstr "Franca"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTY)"
+msgstr "ĈeĄa (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
#, fuzzy, c-format
-msgid "Local Network adress"
-msgstr "neniu retkarto trovita"
+msgid "Hardware probing in progress"
+msgstr "Duobla surmetingo %s"
#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Net Device"
+msgstr "Printservilo"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
-"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
-"\n"
-msgstr ""
+msgid "Summary"
+msgstr "Resumo"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Current interface configuration"
-msgstr "Interreta Konfigurado"
+msgid "Next"
+msgstr "Sekvanta ->"
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Show current interface configuration"
-msgstr "Interreta Konfigurado"
+#: ../../bootloader.pm:1
+#, c-format
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "Vi ne povas instali la startƝargilon en %s-subdiskon\n"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "No (experts only)"
+msgid "CHAP"
msgstr ""
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Automatic reconfiguration"
-msgstr "Post-instala konfigurado"
+#: ../../network/network.pm:1
+#, c-format
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp/zeroconf)"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
"\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
"\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Network interface already configured"
-msgstr "Ekrano ne estas konfigurata"
+#: ../../lang.pm:1
+#, c-format
+msgid "Puerto Rico"
+msgstr "Porto-Riko"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""
-"Bonvole elektu kiun retadaptilon estos konektata al via Loka Reto (LAN)."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "Litova \"numero-vica\" QWERTY-a"
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
-"%s\n"
"\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
msgstr ""
-"Ekzitas nur unu konfigurita retadaptilo sur via sistemo:\n"
-"\n"
-"%s\n"
-"\n"
-"Ĉu vi deziras konfiguri vian Lokan Reton (LAN) kun ĉi tiu adaptilo?"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface"
-msgstr "Reta interfaco"
+msgid "Anguilla"
+msgstr "Angilo"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "NIS Domain"
+msgstr "NIS Domajno"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
+"\n"
+"- User Files:\n"
msgstr ""
-"Mi ne detektas eterretan retadaptilom sur via sistemo. Bonvole lanĉu la\n"
-"aparatokonfigurilon."
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "No network adapter on your system!"
-msgstr "Via komputilo ne havas retadaptilon!"
+msgid "Antarctica"
+msgstr "Antarktio"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Interface %s"
-msgstr "Interfaco %s"
+msgid "Mount options"
+msgstr "Kroĉ-opcioj"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Net Device"
-msgstr "Printservilo"
+msgid "Jamaica"
+msgstr "Jamajko"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
+#: ../../security/help.pm:1
+#, c-format
msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
msgstr ""
-"Nun kiam via Interreta konekto estas konfigurata,\n"
-"vi povas konfiguri vian komputilon por disdividi ĝian Interretan konekton.\n"
-"Notu: vi bezonas dediĉan Retadaptilon por konfiguri Lokan Reton (LAN).\n"
-"\n"
-"Ĉu vi deziras konfiguri Disdividadon de Interreta Konekto?\n"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Disdividado de Interreta Konekto"
+msgid "Please wait, preparing installation..."
+msgstr "Bonvole atenduj, mi preparas instaladon..."
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Disdividado de Interreta Konekto nuntempe kapabligata"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTZ)"
+msgstr "ĈeĄa (QWERTZ)"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Enabling servers..."
+msgid "Track network card id (useful for laptops)"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "dismiss"
-msgstr "forsendu"
+msgid "The port number should be an integer!"
+msgstr ""
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "reconfigure"
-msgstr "rekonfiguru"
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "You must choose an image file first!"
+msgstr "Printila Aparato URI"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore from Hard Disk."
+msgstr "RestaĆ­ru de disketo"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "enable"
-msgstr "ebligu"
+msgid "Add to LVM"
+msgstr "Aldonu al LVM (Redundanca Aro de Malmultekostaj Diskoj)"
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"
+#: ../../network/network.pm:1
+#, c-format
+msgid "DNS server"
+msgstr "DNA servilo"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Disdividado de Interreta Konekto nuntempe malkapabligata"
+msgid "Trinidad and Tobago"
+msgstr "Trinidado kaj Tobago"
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Disdividado de Interreta Konekto nuntempe malkapabligata"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr ""
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Disabling servers..."
-msgstr "Detektas aparatojn..."
+#: ../../fsedit.pm:1
+#, c-format
+msgid "simple"
+msgstr "simpla"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "disable"
-msgstr "malebligu"
+msgid "Clear all"
+msgstr "ForviƝu ĉion"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"
+msgid "No test pages"
+msgstr "Jes, printu ambaƭ de la provpaĝojn"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Disdividado de Interreta Konekto nuntempe kapabligata"
+msgid "Adapter %s: %s"
+msgstr "Adaptilo %s: %s"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
-msgstr ""
+msgid "Falkland Islands (Malvinas)"
+msgstr "Falklandaj Insuloj (Malvinoj)"
-#: ../../standalone/drakhelp:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
+msgid "Unknown model"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Path"
+msgid "if set to yes, check files/directories writable by everybody."
msgstr ""
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "group :"
-msgstr "Laborgrupo"
-
-#: ../../standalone/drakperm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "user :"
-msgstr "Salutnomo"
+msgid "authentication"
+msgstr "AĆ­tentikigado"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Path selection"
-msgstr "Elektado de individuaj pakaĔoj"
-
-#: ../../standalone/drakperm:1
-#, c-format
-msgid "when checked, owner and group won't be changed"
-msgstr ""
+msgid "Backup Now"
+msgstr "Dosiersistemo konfiguro"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Use group id for execution"
-msgstr ""
+msgid "/_File"
+msgstr "/_Dosiero"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use owner id for execution"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
msgstr ""
+"Lanĉu pakaÄ”filtradon por Linuksa kerno 2.2-serioj, por konfiguri\n"
+"brulmuron por protekti vian maƝinon kotraƭ elretaj atakoj."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Set-GID"
-msgstr ""
+msgid "Tamil (ISCII-layout)"
+msgstr "Tamila (ISCII)"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Set-UID"
-msgstr ""
+msgid "Mayotte"
+msgstr "majota"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "sticky-bit"
-msgstr ""
+msgid "Creating auto install floppy..."
+msgstr "Kreas aĆ­toinstalan disketon"
-#: ../../standalone/drakperm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Property"
-msgstr "Pordo"
+msgid "Searching for scanners ..."
+msgstr "Loka printilo"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Permissions"
-msgstr "Versio: %s\n"
+#: ../../steps.pm:1
+#, c-format
+msgid "Partitioning"
+msgstr "Subdiskigante"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Current user"
-msgstr "Akceptu uzanto"
+#: ../../lang.pm:1
+#, c-format
+msgid "Russia"
+msgstr "Rusio"
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "browse"
+msgid "ethernet card(s) detected"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Syslog"
+msgstr "sistema logdosiero (syslog)"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Edit current rule"
+msgid "Can't create catalog!"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "edit"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
msgstr ""
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Delete selected rule"
-msgstr "Malinstalu printvicon"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "delete"
-msgstr "Forigu"
+#: ../../fsedit.pm:1
+#, c-format
+msgid "Not enough free space for auto-allocating"
+msgstr "Ne sufiĉe da libera spaco por aƭtomate disponigi novajn subdiskojn"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Add a new rule at the end"
-msgstr "Neniu printilo"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Set root password"
+msgstr "Difinu pasvorton de root"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "add a rule"
-msgstr "Aldonu modulon"
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
+msgstr ""
+"Ne ekzistas libera pelilo por via sonkarto (%s), sed ekzistas proprieta "
+"pelilo ĉe \"%s\"."
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Move selected rule down one level"
+msgid "After resizing partition %s, all data on this partition will be lost"
msgstr ""
+"Post vi regrandecigas subdiskon %s, ĉiuj datenoj en ĉi tiu subdisko estos\n"
+"perdata"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Down"
-msgstr "Finata"
+msgid "Internet connection configuration"
+msgstr "Interreta konektaĔo kaj konfiguro"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Move selected rule up one level"
+msgid "Scanning for TV channels"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Up"
+msgid "Kernel:"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/_About..."
+msgstr "/Helpo/_Pri..."
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "select perm file to see/edit"
-msgstr ""
+msgid "Bengali"
+msgstr "bengala"
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
+msgid "Preference: "
+msgstr "Prefero: "
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Wizard..."
+msgstr "Sorĉisto..."
+
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#, c-format
+msgid "Services: %d activated for %d registered"
msgstr ""
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "permissions"
-msgstr "subdisko: %s"
+#: ../../any.pm:1
+#, c-format
+msgid "Create a bootdisk"
+msgstr "Kreu praƝargdisketon"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "group"
-msgstr "Laborgrupo"
+#: ../../lang.pm:1
+#, c-format
+msgid "Solomon Islands"
+msgstr "Salomon-Insuloj"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "user"
-msgstr "Salutnomo"
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "(module %s)"
+msgstr "(modulo %s)"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "path"
-msgstr ""
+msgid "Workgroup"
+msgstr "Laborgrupo"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Kreas aĆ­toinstalan disketon"
+msgid "Printer host name or IP"
+msgstr "Printilaj PoƝtejo"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
+msgid "Host Path or Module"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
+msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "No image found"
-msgstr "Loka printilo"
+msgid "Show current interface configuration"
+msgstr "Interreta Konfigurado"
-#: ../../standalone/drakpxe:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Installation image directory"
-msgstr "LAN KonfiguraĔo"
+msgid "Development"
+msgstr "Programisto"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
+msgid "Done"
+msgstr "Finata"
-#: ../../standalone/drakpxe:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "The DHCP end ip"
+msgid "Web Server"
+msgstr "Interret-servilo"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\tDo not include System Files\n"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "The DHCP start ip"
+msgid "Chile"
+msgstr "Ĉilio"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
"\n"
+"Do not use \"scannerdrake\" for this device!"
msgstr ""
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Interfaco %s"
+#: ../../any.pm:1
+#, c-format
+msgid "(already added %s)"
+msgstr "(jam aldonis %s)"
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
+#: ../../printer/main.pm:1
+#, c-format
+msgid ", using command %s"
msgstr ""
-"Bonvole elektu kiun retadaptilon vi deziras uzi por konekti al la interreto"
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Alt and Shift keys simultaneously"
msgstr ""
-"Nun kiam via Interreta konekto estas konfigurata,\n"
-"vi povas konfiguri vian komputilon por disdividi ĝian Interretan konekton.\n"
-"Notu: vi bezonas dediĉan Retadaptilon por konfiguri Lokan Reton (LAN).\n"
-"\n"
-"Ĉu vi deziras konfiguri Disdividadon de Interreta Konekto?\n"
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Installation Server Configuration"
-msgstr "LAN KonfiguraĔo"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Flags"
+msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "PXE Server Configuration"
-msgstr "LAN KonfiguraĔo"
+msgid "Add/Del Users"
+msgstr "Aldonu uzanto"
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Please wait, setting security options..."
-msgstr "Preparas instaladon"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Host/network IP address missing."
+msgstr ""
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Please wait, setting security level..."
-msgstr "Elektas sekurnivelon"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "weekly"
+msgstr ""
-#: ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Periodic Checks"
+msgid "Settings"
+msgstr "KonfiguraĔoj"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The entered host/network IP is not correct.\n"
msgstr ""
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "System Options"
-msgstr "Modulaj opcioj:"
+#: ../../any.pm:1
+#, c-format
+msgid "Here is the full list of available countries"
+msgstr "Jen la kompleta listo de atingeblaj landoj"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Network Options"
-msgstr "Modulaj opcioj:"
+msgid "Alternative test page (A4)"
+msgstr "Printas provpaĝo(j)n..."
-#: ../../standalone/draksec:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
+"Se vi havas ĉiujn de la KDROM-oj en la listo sube, klaku \"Jes\".\n"
+"Se vi havas neniujn de ĉi tiuj KDROM-oj, klaku \"Nuligu\".\n"
+"Se vi mankas nur iujn de la KDROM-oj, malelektu ilin, kaj poste klaku \"Jes"
+"\"."
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Security Administrator:"
-msgstr "Malproksimaj lpd Printilaj Opcioj"
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Wait please"
+msgstr ""
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Security Alerts:"
-msgstr "Elektas sekurnivelon"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "PAP"
+msgstr "PAP (Pasvorta AĆ­tentikigada Protokolo)"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Security Level:"
-msgstr "Elektas sekurnivelon"
+msgid "Backup user files"
+msgstr "Malbona rezerva dosiero"
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "(default value: %s)"
-msgstr " (DefaĆ­lta)"
+#: ../../diskdrake/dav.pm:1
+#, c-format
+msgid "New"
+msgstr "Nova"
-#: ../../standalone/draksec:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-" to the Internet as a client.\n"
-"\n"
-"High: There are already some restrictions, and more automatic checks "
-"are run every night.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
"\n"
-"Higher: The security is now high enough to use the system as a server "
-"which can accept\n"
-" connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-" should choose a lower level.\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
"\n"
-"Paranoid: This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-" features are at their maximum\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
"\n"
-"Security Administrator:\n"
-" If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-" email)"
-msgstr ""
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
"\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
"\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""
-#: ../../standalone/draksound:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"If you do not know what to choose, stay with the default option."
msgstr ""
-#: ../../standalone/draksound:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Load from floppy"
+msgstr "Ɯargu de disketo"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "No Sound Card detected!"
-msgstr "Ne konektita"
+msgid "The following printer was auto-detected. "
+msgstr "La sekvaj pakaĔoj estos malinstalataj"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "%s BootSplash (%s) preview"
+msgid "Boot Floppy"
msgstr ""
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Generating preview ..."
-msgstr "Detektas aparatojn..."
-
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "You must choose an image file first!"
-msgstr "Printila Aparato URI"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Norwegian"
+msgstr "Norvega"
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "ProgressBar color selection"
-msgstr "Printilan Konekton"
+msgid "Searching for new scanners ..."
+msgstr "Loka printilo"
-#: ../../standalone/draksplash:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
+msgid "Apache World Wide Web Server"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "saving Bootsplash theme..."
+msgid "stepping of the cpu (sub model (generation) number)"
msgstr ""
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "choose image file"
-msgstr "Elektu agon"
-
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "choose image"
-msgstr "Elektu agon"
+msgid "select path to restore (instead of /)"
+msgstr "Bonvole, elektu la specon de via muso."
#: ../../standalone/draksplash:1
#, fuzzy, c-format
msgid "Configure bootsplash picture"
msgstr "Konfiguru servojn"
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "Make kernel message quiet by default"
-msgstr ""
-
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Display logo on Console"
-msgstr ""
+msgid "China"
+msgstr "Ĉinio"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Choose color"
-msgstr "Elektu ekranon"
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Save theme"
-msgstr "Instalu sistemon"
+#: ../../lang.pm:1
+#, c-format
+msgid "Georgia"
+msgstr "Kartvelujo"
-#: ../../standalone/draksplash:1
+#: ../../standalone/printerdrake:1
#, fuzzy, c-format
-msgid "Preview"
-msgstr "aparato"
+msgid "Reading data of installed printers..."
+msgstr "Loka printilo"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "the color of the progress bar"
+msgid " Erase Now "
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "the height of the progress bar"
-msgstr ""
+msgid "server"
+msgstr "servilo"
-#: ../../standalone/draksplash:1
+#: ../../install_any.pm:1
#, c-format
-msgid "the width of the progress bar"
-msgstr ""
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "EnƝovu FAT-formatitan disketon en drajvo %s"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
+msgid "yes means the processor has an arithmetic coprocessor"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
+msgid "Please Wait... Applying the configuration"
+msgstr "Bonvole atendu... Mi aplikas la konfiguraĔon"
-#: ../../standalone/draksplash:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "text box height"
-msgstr ""
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Bonvenon al GRUB la elektilo por mastrumaj sistemoj!"
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "text width"
+msgid "Grub"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
+msgid "SCSI controllers"
+msgstr "SCSI-kontroliloj"
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
+msgid " on LPD server \"%s\", printer \"%s\""
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
#, c-format
-msgid "Browse"
+msgid "Choosing a display manager"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, fuzzy, c-format
-msgid "Theme name"
-msgstr "Opuza nomo"
+msgid "Zeroconf Host name"
+msgstr "PoƝtejo"
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "final resolution"
-msgstr "Distingivo"
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "IP address should be in format 1.2.3.4"
+msgstr "IP-adreso devus esti en la notacio 1.2.3.4"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Ecuador"
+msgstr "Ekvadoro"
+
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "first step creation"
-msgstr "Startdiskokreado"
+msgid "Add an item"
+msgstr "Aldonu uzulon"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgid "The printers on this machine are available to other computers"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+msgid "I can't find needed image file `%s'."
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No TV Card detected!"
-msgstr ""
+msgid "No sound card detected. Try \"harddrake\" after installation"
+msgstr "Ne detektis sonkarto. Provu \"harddrake\" post instalado"
-#: ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
+msgid ""
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "Have a nice day!"
-msgstr ""
+msgid "Shell"
+msgstr "Ɯelo"
-#: ../../standalone/drakxtv:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "XawTV isn't installed!"
-msgstr ""
+msgid "PCI"
+msgstr "PCI"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Sao Tome and Principe"
+msgstr "Sao-Tomeo kaj Principeo"
+
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Can't login using username %s (bad password?)"
+msgstr "Ne povas akcepti uzante uzulnomon %s (ĉu malĝusta pasvorto?)"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Azerbaidjani (latin)"
+msgstr "Azerbajĝana (latina)"
+
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Estis eraro dum instalado de pakaĔoj:"
+msgid "Package not installed"
+msgstr "Eliru instalprogramon"
-#: ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
+#, fuzzy, c-format
+msgid "Become a MandrakeExpert"
+msgstr "Spertulo"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Scanning for TV channels"
-msgstr ""
+msgid "American Samoa"
+msgstr "Amerika Samoo"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
+msgid "Protocol"
+msgstr "Protokolo"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Copy fonts on your system"
+msgstr "Via komputilo ne havas retadaptilon!"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Area:"
+msgid "Harddrake help"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "TV norm:"
+msgid "Bogomips"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Mandrake Terminal Server Configuration"
+msgstr "Interreta Konfigurado"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Please,\n"
-"type in your tv norm and country"
+"\n"
+" DrakBackup Report Details\n"
+"\n"
+"\n"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Australian Optus cable TV"
+msgid "Restore all backups"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Newzealand"
+msgid "if set to yes, check open ports."
msgstr ""
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "France [SECAM]"
-msgstr "Franca"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "This may take a moment to erase the media."
+msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "You can't select/unselect this package"
+msgstr "Vi ne povas elektu/malelektu ĉi tiun pakaÄ”on"
+
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
+#, c-format
+msgid "Warning"
+msgstr "Averto"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"- Other Files:\n"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "East Europe"
-msgstr "EĆ­ropo"
+msgid "Remote host name"
+msgstr "Malproksima poƝtejo"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "West Europe"
-msgstr "EĆ­ropo"
+msgid "deactivate now"
+msgstr "Aktiva"
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "China (broadcast)"
-msgstr ""
+msgid "access to X programs"
+msgstr "aliro al X-programoj"
-#: ../../standalone/drakxtv:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Japan (cable)"
-msgstr ""
+msgid "Computing the size of the Windows partition"
+msgstr "Kalkulante la liberan spacon sur la Vindoza subdisko"
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#: ../../standalone/drakxtv:1
#, c-format
-msgid "Japan (broadcast)"
-msgstr ""
+msgid "Italy"
+msgstr "Italio"
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "Canada (cable)"
-msgstr "Kanada (Kebeka)"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Name of printer"
+msgstr "Nomo de printilo"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "USA (cable-hrc)"
-msgstr ""
+msgid "disable"
+msgstr "malebligu"
-#: ../../standalone/drakxtv:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "USA (cable)"
-msgstr ""
+msgid "error unmounting %s: %s"
+msgstr "eraro dum malmunti %s: %s"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "USA (broadcast)"
+msgid "Do it!"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"XawTV isn't installed!\n"
-"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
-msgstr ""
+msgid "Cayman Islands"
+msgstr "Kajmana Insularo"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "primary"
+msgid "%s not responding"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "secondary"
-msgstr "%d sekundoj"
+msgid "Select model manually"
+msgstr "Malproksima printilo"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Format"
+msgstr "Formatu"
+
+#: ../../network/adsl.pm:1
#, c-format
msgid ""
-"Click on a device in the left tree in order to display its information here."
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
msgstr ""
+"La plej ofte uzata maniero por konekti per ADSL estas pppoe.\n"
+"Kelkaj konektoj uzas pptp, malmultaj uzas dhcp.\n"
+"Se vi ne scias, elektu 'uzu pppoe'"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Unknown"
-msgstr "Genera"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Various"
+msgstr "Diversaj"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "unknown"
-msgstr ""
+msgid "Zip"
+msgstr "Zip"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Running \"%s\" ..."
-msgstr "Legas datumbason de CUPS peliloj..."
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"\n"
+"\n"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Run config tool"
+msgid ""
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Configure module"
-msgstr "Konfiguru muson"
+#: ../../printer/data.pm:1
+#, c-format
+msgid "PDQ"
+msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Information"
-msgstr "Montru informon"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Albanian"
+msgstr "Albana"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Detected hardware"
-msgstr "Vidu hardvaran informon"
+#: ../../lang.pm:1
+#, c-format
+msgid "Lithuania"
+msgstr "Litovio"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Harddrake2 version "
-msgstr "Detektado de fiksdisko(j)"
+#: ../../any.pm:1
+#, c-format
+msgid "Compact"
+msgstr "Kompakta"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Detection in progress"
-msgstr "Duobla surmetingo %s"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Detected model: %s %s"
+msgstr "Mi detektis modelon: %s %s"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Author:"
-msgstr "AĆ­tomate esploru"
+#: ../../share/advertising/03-software.pl:1
+#, c-format
+msgid "MandrakeSoft has selected the best software for you"
+msgstr ""
#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "About Harddrake"
-msgstr ""
+msgid "Local files"
+msgstr "Lokaj dosieroj"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/_About..."
-msgstr "/Helpo/_Pri..."
+#: ../../pkgs.pm:1
+#, c-format
+msgid "maybe"
+msgstr "elbe"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "/_Report Bug"
-msgstr "/_Raportu Cimo"
+msgid "Panama"
+msgstr "Panamo"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
msgstr ""
+"Via grafika karto Ɲajnas havi TV-OUT-konektilon.\n"
+"Ĝi konfigureblas por funkcii uzante frame-buffer.\n"
+"\n"
+"Por tio vi devas konekti vian grafikan karton al via televidilo antaĆ­ ol "
+"startigi vian komputilon.\n"
+"Poste elektu la \"TVout\"-eniron en la startigilo\n"
+"\n"
+"Ĉu vi havas tiun konektilon?"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Select a device !"
-msgstr "Elektu grafikan karton"
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Monitor"
+msgstr "Ekrano"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Description of the fields:\n"
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
"\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Harddrake help"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/_Fields description"
-msgstr "Priskribo"
+msgid "65 thousand colors (16 bits)"
+msgstr "65 mil koloroj (16 bitoj)"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/_Help"
-msgstr "/_Helpo"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/_Quit"
-msgstr "Ĉesu"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "Malproksima printilo"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
+msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _modems"
-msgstr "Malproksima printilo"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Size: %d KB\n"
+msgstr "Grandeco: %d KB\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "/Autodetect _printers"
-msgstr "Malproksima printilo"
-
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#, c-format
-msgid "/_Options"
-msgstr "/_Opcioj"
+msgid "Remove fonts on your system"
+msgstr "Via komputilo ne havas retadaptilon!"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "the vendor name of the processor"
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "the vendor name of the device"
-msgstr ""
+msgid "Graphical interface at startup"
+msgstr "X Fenestro ĉe komenco"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "Bonvole, elektu al kiu seria pordo estas via muso konektata."
+msgid "Please enter the directory to save:"
+msgstr "Bonvole, provu la muson"
#: ../../standalone/harddrake2:1
#, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
+msgid "format of floppies supported by the drive"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../raid.pm:1
+#, c-format
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "Ne estas sufiĉaj subdiskoj por RAID nivelo %d\n"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Model stepping"
-msgstr "Formatas"
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
+msgstr ""
+"Jen la sekvantaj printvicoj.\n"
+"Vi povas aldoni pli aƭ Ɲanĝi la ekzistantajn."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "the number of the processor"
-msgstr ""
+msgid "Connected"
+msgstr "Konektita"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Processor ID"
-msgstr ""
+msgid "USB printer \\#%s"
+msgstr "USB-presilo \\#%s"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "network printer port"
-msgstr "Reta Printilo (TCP/ingo)"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Macedonian"
+msgstr "Macedona"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "the name of the CPU"
-msgstr ""
+msgid "Bridges and system controllers"
+msgstr "Pont- kaj sistem-kontroliloj"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Name"
-msgstr "Nomo: "
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "/File/_Save"
+msgstr "/Dosiero/_Savu"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "the number of buttons the mouse has"
-msgstr "2 butonoj"
+#: ../../lang.pm:1
+#, c-format
+msgid "Mali"
+msgstr "Malio"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Number of buttons"
-msgstr "2 butonoj"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "No details"
+msgstr "Neniaj detaloj"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Official vendor name of the cpu"
-msgstr ""
+msgid "very nice"
+msgstr "tre agrabla(j)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Model name"
-msgstr "Modulonomo"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
-msgstr ""
+msgid "Preview"
+msgstr "aparato"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Model"
-msgstr "Muso"
+msgid "Remote Control"
+msgstr "Malproksima printilo"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "hard disk model"
-msgstr "Memoro de Karto (DMA)"
+msgid "Please select media for backup..."
+msgstr "Bonvole, elektu lingvon por uzi."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "class of hardware device"
-msgstr ""
+msgid "XFree86 server: %s\n"
+msgstr "XFree86 servilo: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Media class"
+msgid "Allow Thin Clients"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Sub generation of the cpu"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Level"
-msgstr "nivelo"
+msgid "Georgian (\"Russian\" layout)"
+msgstr "Kartvela (\"Rusa\" aranĝo)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Format of floppies supported by the drive"
-msgstr ""
+msgid "/_Options"
+msgstr "/_Opcioj"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Floppy format"
-msgstr "Formatu"
+msgid "Your printer model"
+msgstr "Malproksima printilo"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
msgstr ""
+"\n"
+"\n"
+"(AVERTO! Vi uzas XFS por via root-subdisko,\n"
+"krei startdisketon sur 1,44-mb-disketo verƝajne fiaskos,\n"
+"ĉar XFS bezonas tre grandan pelilon)."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Halt bug"
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "F00f bug"
-msgstr ""
+#: ../../share/advertising/04-configuration.pl:1
+#, fuzzy, c-format
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "Interreta Konfigurado"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Save"
+msgstr "Stato:"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Whether the FPU has an irq vector"
+msgid "The %s is unsupported"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr ""
+msgid "Load the drivers for your usb devices."
+msgstr "Ɯargu la pelilojn por via usb-aparatoj."
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Is FPU present"
-msgstr ""
+msgid "Disk"
+msgstr "Disko"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
-msgstr ""
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Enter a printer device URI"
+msgstr "Printila Aparato URI"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Fdiv bug"
+msgid ""
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr ""
+msgid "Israel"
+msgstr "Israelo"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Flags"
-msgstr ""
+msgid "French Guiana"
+msgstr "Franca Gujano"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr ""
+msgid "default:LTR"
+msgstr "default:LTR"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Module"
-msgstr "Muso"
+msgid "add a rule"
+msgstr "Aldonu modulon"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
+msgid "A command line must be entered!"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "New devfs device"
-msgstr "Prokura kluzaparato"
-
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "old static device name used in dev package"
+msgid "Select user manually"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Old device file"
-msgstr "Elektu dosieron"
+msgid "Transfer printer configuration"
+msgstr "Interreta Konfigurado"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "This field describes the device"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "Ĉu vi deziras starti vian konektaĔon je startado de la sistemo?"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Frequency (MHz)"
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
-msgstr ""
+msgid "%s (Port %s)"
+msgstr "%s (Pordo%s)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Cpuid level"
-msgstr "Elektas sekurnivelon"
+msgid "Use network connection to backup"
+msgstr "Malbona rezerva dosiero"
-#: ../../standalone/harddrake2:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, c-format
-msgid "Cpuid family"
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr ""
+msgid "Accept user"
+msgstr "Akceptu uzanto"
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, c-format
-msgid "Coma bug"
-msgstr ""
+msgid "Server"
+msgstr "Servilo"
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
+msgid "Bad choice, try again\n"
+msgstr "Malbona elektaĔo, provu denove\n"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Drive capacity"
+msgid "Heard and McDonald Islands"
+msgstr "Heard- kaj McDonald-Insuloj"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "No alternative driver"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Toggle to expert mode"
+msgstr "Ɯanĝu al Spertula reĝimo"
+
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Size of the (second level) cpu cache"
+msgid "(on this machine)"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "Cache size"
-msgstr "grandeco de pecoj"
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "IP-adreso devus esti en la notacio 1.2.3.4"
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
#, c-format
msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+"\"%s\" based winmodem detected, do you want to install needed software ?"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Location on the bus"
+msgid "Looking at packages already installed..."
+msgstr "Rigardante jam instalitajn pakaĔojn..."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use Differential Backups"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Driver"
+msgstr "Pelilo"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
msgstr ""
+"Linuxconf aranĝos kelkfoje por fari diversajn taskojn\n"
+"dum starto por daƭrigi la sistem-konfiguraĔon."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Bus identification"
-msgstr "AĆ­tentikigado"
+msgid "Printer on remote lpd server"
+msgstr "Malproksimaj lpd servilo"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, c-format
-msgid "Bogomips"
+msgid ""
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "EIDE/SCSI channel"
-msgstr ""
+msgid "No mouse"
+msgstr "Neniu Muso"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Channel"
-msgstr "Nuligu"
+#: ../../crypto.pm:1 ../../lang.pm:1
+#, c-format
+msgid "Germany"
+msgstr "Germanio"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-msgstr ""
+msgid "Austria"
+msgstr "AĆ­strio"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bus"
-msgstr ""
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr "Rulu \"sndconfig\" post instalado por konfiguri vian sonkarton"
-#: ../../standalone/harddrake2:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr ""
+msgid "Collapse Tree"
+msgstr "Maletendu Arbon"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Alternative drivers"
-msgstr "Printas provpaĝo(j)n..."
+msgid "Auto Install Configurator"
+msgstr "Post-instala konfigurado"
-#: ../../standalone/keyboarddrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
+msgid "Configure networking"
+msgstr "Konfiguru retumon"
-#: ../../standalone/keyboarddrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Bonvole, elektu vian klavaran aranĝon."
+msgid "Where do you want to install the bootloader?"
+msgstr "Kie vi deziras instali la startƝargilon?"
-#: ../../standalone/livedrake:1
+#: ../../help.pm:1
#, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr ""
-
-#: ../../standalone/livedrake:1
-#, fuzzy, c-format
msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Ɯanĝu vian KDROM!\n"
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
"\n"
-"Bonvole, enƝovu la KDROM-on etikedatan \"%s\" en via drajvo kaj klaku \"Jes"
-"\"\n"
-"kiam vi finos.\n"
-"Se vi ne havas ĝin, klaku \"Nuligu\" por eviti la instaladon de ĉi tiu KDROM."
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
+msgstr ""
-#: ../../standalone/livedrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Change Cd-Rom"
-msgstr "Ɯanĝu KD-ROM-on"
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr ""
-#: ../../standalone/localedrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "The change is done, but to be effective you must logout"
+msgid "DHCP client"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Save as.."
-msgstr "Savu Kiel..."
-
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Please enter your email address below "
-msgstr "Bonvole provu denove"
+msgid "Restoring from file %s failed: %s"
+msgstr "RestaĆ­ris el dosiero %s malsukcesis: %s"
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "alert configuration"
-msgstr "Interreta Konfigurado"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Loĝiteka Muso (seria, malnova C7 speco)"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
+msgid "Are you sure that you want to set up printing on this machine?\n"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "load setting"
-msgstr "Formatas"
+msgid "New devfs device"
+msgstr "Prokura kluzaparato"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
+msgid "ERROR: Cannot spawn %s."
msgstr ""
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "service setting"
-msgstr "Servilo"
-
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Xinetd Service"
-msgstr "Printservilo"
-
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Webmin Service"
-msgstr "Servilo"
-
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "SSH Server"
-msgstr "NIS Servilo"
-
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Samba Server"
-msgstr "NIS Servilo"
-
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Postfix Mail Server"
-msgstr "Datumbazoj"
-
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, fuzzy, c-format
-msgid "Ftp Server"
-msgstr "NIS Servilo"
+msgid "Boot Style Configuration"
+msgstr "Post-instala konfigurado"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Domain Name Resolver"
-msgstr "Domajna nomo"
+msgid "Automatic time synchronization"
+msgstr "Auxtomata hor-sinkronizado (uzante NTP) "
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Apache World Wide Web Server"
+msgid "Backup files not found at %s."
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
+msgid "Thank you for choosing Mandrake Linux 9.1"
msgstr ""
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Mail alert configuration"
-msgstr "KonfiguraĔon"
-
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Mail alert"
-msgstr ""
+msgid "Armenian (phonetic)"
+msgstr "Armena (fonetika)"
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "bonvole atendu, mi vortanalizas la dosieron: %s"
+msgid "Card model:"
+msgstr "Model de la karto:"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Content of the file"
-msgstr "Enhavoj de la dosiero"
+msgid "Thin Client"
+msgstr ""
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "Calendar"
-msgstr "Kalendaro"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Start Server"
+msgstr "NIS Servilo"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose file"
-msgstr "Elektu dosieron"
+msgid "Turkmenistan"
+msgstr "Turkmenistano"
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "but not matching"
-msgstr "sed ne konformanta(j)"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "All remote machines"
+msgstr "Malproksima printilo"
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "matching"
-msgstr "konformanta(j)"
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Install themes"
+msgstr "Instalu sistemon"
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Settings"
-msgstr "KonfiguraĔoj"
+msgid ""
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "A tool to monitor your logs"
-msgstr "Ilo por vidi vian logdosieron"
+msgid "Espanol"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "search"
-msgstr "serĉu"
+msgid "Preparing installation"
+msgstr "Preparas instaladon"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mandrake Tools Explanation"
+msgid "Edit selected host/network"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Syslog"
-msgstr "sistema logdosiero (syslog)"
+msgid "Add User -->"
+msgstr "Aldonu uzanto"
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Messages"
-msgstr "mesaĝoj"
+#: ../../lang.pm:1
+#, c-format
+msgid "Nauru"
+msgstr "Nauro"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "User"
-msgstr "Salutnomo"
+msgid "True Type fonts installation"
+msgstr "Preparas instaladon"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Help/_About..."
-msgstr "/Helpo/_Pri..."
+msgid "Auto-detect printers connected directly to the local network"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "/Options/Test"
-msgstr "/Opcioj/Provu"
+msgid "LAN configuration"
+msgstr "LAN KonfiguraĔo"
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "/File/-"
-msgstr "/Dosiero/-"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "hard disk model"
+msgstr "Memoro de Karto (DMA)"
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "/File/Save _As"
-msgstr "/Dosiero/Savu _Kiel"
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "Vi ne povas uzi LVM-logikan subdiskon por kroĉpunkto %s"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "<control>S"
-msgstr "<control>S"
+msgid "Get Windows Fonts"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "/File/_Save"
-msgstr "/Dosiero/_Savu"
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "<control>O"
-msgstr "<control>O"
+msgid "Iranian"
+msgstr "Irana"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "/File/_Open"
-msgstr "/Dosiero/_Malfermu"
+msgid "Croatia"
+msgstr "Kroatio"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "<control>N"
-msgstr "<stir>N"
+msgid "Gateway:"
+msgstr "Kluzo:"
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "/File/_New"
-msgstr "/Dosiero/_Nova"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Add server"
+msgstr "Aldonu uzanto"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Show only for the selected day"
-msgstr "Montru nur por ĉi tiu tago"
+msgid "Remote printer name"
+msgstr "Malproksima printilo"
-#: ../../standalone/mousedrake:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "Emulate third button?"
-msgstr "Ĉu vi deziras emuli trian musbutonon?"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together in order to highly reduce hacking risks."
+msgstr ""
-#: ../../standalone/mousedrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please choose your mouse type."
-msgstr "Bonvole, elektu la specon de via muso."
+msgid "Device: "
+msgstr "Aparato: "
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, fuzzy, c-format
-msgid "Connect %s"
-msgstr "Konektu"
+msgid "Printerdrake"
+msgstr "Printilo"
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "License agreement"
+msgstr "Licenca kontrakto"
+
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "Disconnect %s"
-msgstr "Malkonektu"
+msgid "System Options"
+msgstr "Modulaj opcioj:"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
+msgid "Please enter the directory where backups are stored"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid "Please choose the desired security level"
+msgstr "Elektu sekurnivelon?"
+
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "received"
+msgid "This host is already in the list, it cannot be added again.\n"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "transmitted"
-msgstr ""
+msgid ", USB printer"
+msgstr ", USB-printilo"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Choose the applications that will support the fonts:"
+msgstr "Elektu la subdiskoj kiuj vi deziras formati"
+
+#: ../../steps.pm:1
#, c-format
-msgid "received: "
-msgstr ""
+msgid "Configure X"
+msgstr "Konfiguru X"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "sent: "
-msgstr ""
+msgid "Turkish (traditional \"F\" model)"
+msgstr "Turka (tradicia \"F\" modelo)"
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Local measure"
-msgstr "Lokaj dosieroj"
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Congratulations!"
+msgstr "Gratulojn!"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "average"
+msgid "Use owner id for execution"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Color configuration"
-msgstr "Interreta Konfigurado"
+msgid "Down"
+msgstr "Finata"
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
+msgid "Raw printer (No driver)"
msgstr ""
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connection complete."
-msgstr "Speco de konekto"
-
-#: ../../standalone/net_monitor:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Disconnection from the Internet complete."
-msgstr ""
+msgid "Install rpm"
+msgstr "Instalu rpm"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disconnection from the Internet failed."
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
msgstr ""
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connecting to the Internet "
-msgstr "Konektu al la Interreto"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Time remaining "
+msgstr "Tempo restanta "
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Disconnecting from the Internet "
-msgstr "Konektu al la Interreto"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "UK keyboard"
+msgstr "Unuiĝinta Regna klavaro"
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Konfiguru interretan konektaĔon"
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Unmount"
+msgstr "Malmuntu"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Logs"
+msgid "Uninstall Fonts"
msgstr ""
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connection Time: "
-msgstr "Speco de konekto"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Microsoft Explorer"
+msgstr "Mikrosofta Esplorilo"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Receiving Speed:"
+msgid "German (no dead keys)"
+msgstr "Germana (neniom da mortaj klavoj)"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transferring %s..."
msgstr ""
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Sending Speed:"
-msgstr "Konservu en dosiero"
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "32 thousand colors (15 bits)"
+msgstr "32 mil koloroj (15 bitoj)"
-#: ../../standalone/net_monitor:1
+#: ../../any.pm:1
#, c-format
-msgid "Statistics"
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
msgstr ""
+"Vi povas eksporti uzante NFS aƭ Samba. Bonvole elektu kiun vi Ɲatus uzi."
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Profile "
-msgstr "muntado malsukcesis: "
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Reboot"
+msgstr "Restarto"
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Network Monitoring"
-msgstr "Reta KonfiguraĔo"
+#: ../../lang.pm:1
+#, c-format
+msgid "Gambia"
+msgstr "Gambio"
-#: ../../standalone/printerdrake:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Reading data of installed printers..."
-msgstr "Loka printilo"
+msgid "Mandrake Control Center"
+msgstr "Konekti al la interreto"
-#: ../../standalone/scannerdrake:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Name/IP address of host:"
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
+msgid ""
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scannerdrake"
-msgstr "Elektu grafikan karton"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Bonvole, provu la muson"
-
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
+msgid "\t-Tape \n"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Sharing of local scanners"
-msgstr "Loka printilo"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "This machine"
-msgstr "konformanta(j)"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Remove selected host"
-msgstr "Malinstalu printvicon"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Edit selected host"
-msgstr "Malinstalu printvicon"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Add host"
-msgstr "Aldonu uzanto"
-
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakhelp:1
#, c-format
-msgid "These are the machines from which the scanners should be used:"
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Usage of remote scanners"
-msgstr "Uzu liberan spacon"
+msgid "Remember this password"
+msgstr "Neniu pasvorto"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "All remote machines"
-msgstr "Malproksima printilo"
+msgid "Internet Connection Sharing is now enabled."
+msgstr "Disdividado de Interreta Konekto nuntempe kapabligata"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+msgid "\t-Network by SSH.\n"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use the scanners on hosts: "
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Use scanners on remote computers"
-msgstr ""
+msgid "Use the free space on the Windows partition"
+msgstr "Uzu la liberan spacon sur la Vindoza subdisko"
#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Printilo"
+msgid "%s found on %s, configure it automatically?"
+msgstr "Ĉu vi deziras konfiguri printilon?"
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
#, c-format
-msgid "The scanners on this machine are available to other computers"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
+msgid "XFree86 driver: %s\n"
+msgstr "XFree86 pelilo: %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+msgid "This host/network is already in the list, it cannot be added again.\n"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Re-generating list of configured scanners ..."
+msgid ""
+"\n"
+" DrakBackup Report \n"
+"\n"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for new scanners ..."
-msgstr "Loka printilo"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for configured scanners ..."
-msgstr "Loka printilo"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scanner sharing"
-msgstr "Printilo"
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the packages you want to install"
+msgstr "Elektu la pakaĔojn kiuj vi deziras instali"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add a scanner manually"
-msgstr ""
+msgid "Papua New Guinea"
+msgstr "Papuo-Nov-Gvineo"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Search for new scanners"
-msgstr "Loka printilo"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Serbian (cyrillic)"
+msgstr "Serba (cirila)"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "There are no scanners found which are available on your system.\n"
+msgid "Make kernel message quiet by default"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
-msgstr "Via komputilo ne havas retadaptilon!"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr "Via komputilo ne havas retadaptilon!"
-
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
msgstr ""
+"Ĉu vi deziras konfiguri tiun ĉi presilon (\"%s\")\n"
+"kiel defaĆ­ltan presilon?"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "choose device"
-msgstr "Starta aparato"
-
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please select the device where your %s is attached"
+msgid "The DHCP end range"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for scanners ..."
-msgstr "Loka printilo"
+#: ../../any.pm:1
+#, c-format
+msgid "Creating bootdisk..."
+msgstr "Kreas startdisketon"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Auto-detect available ports"
-msgstr "Malproksima printilo"
+msgid "Wait please, testing your connection..."
+msgstr "Konfiguru interretan konektaĔon"
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr ""
+msgid "Bringing down the network"
+msgstr "Haltas de la reto"
-#: ../../standalone/scannerdrake:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Login ID"
+msgstr "Salutnomo"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
msgstr ""
+"NFS estas populara protokolo por dosierdistribuado tra TCP/IP retoj.\n"
+"Ĉi tiu servo provizas NFS dosierƝlosado."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "The %s is unsupported"
+msgid "DHCP Client"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr ""
+msgid "dismiss"
+msgstr "forsendu"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
-msgstr ""
+msgid "Printing/Scanning on \"%s\""
+msgstr "Presanta/skananta per \"%s\""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Port: %s"
-msgstr "Pordo"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "omit raid modules"
+msgstr "forlasu RAID-ajn modulojn"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
-msgid ", "
+msgid ""
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
+"lpd estas la printvica dajmono bezonata por lpr taƭge funkcii. Ĝi estas\n"
+"baze servilo kiu arbitracias printajn taskojn al printilo(j)."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Detected model: %s"
-msgstr "Duobla surmetingo %s"
+msgid "Internet Connection Configuration"
+msgstr "Interreta konektaĔo kaj konfiguro"
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid " ("
+msgid "comma separated numbers"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Select a scanner model"
-msgstr "Elektu grafikan karton"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid ""
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
+msgid "Move selected rule up one level"
msgstr ""
#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "Ĉu vi deziras konfiguri printilon?"
-
-#: ../../standalone/service_harddrake:1
-#, fuzzy, c-format
-msgid "Hardware probing in progress"
-msgstr "Duobla surmetingo %s"
+msgid ""
+"The following scanner\n"
+"\n"
+"%s\n"
+"is available on your system.\n"
+msgstr "Via komputilo ne havas retadaptilon!"
-#: ../../standalone/service_harddrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Some devices were added:\n"
-msgstr ""
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "Ĉu vi vere deziras forigi la presilon \"%s\"?"
-#: ../../standalone/service_harddrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr ""
+msgid "I can't find any room for installing"
+msgstr "Mi ne trovas spacon por instali"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Default printer"
+msgstr "Loka printilo"
+
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
msgstr ""
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Welcome to the Open Source world."
-msgstr ""
+msgid "Modify RAID"
+msgstr "Ɯanĝu RAID (Redundanca Aro de Malmultekostaj Diskoj)"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
+msgid ""
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
msgstr ""
+"Mi detektis ISDN-an PCI-an Karton, sed mi ne scias la specon. Bonvole "
+"elektu\n"
+"unu el la PCI-aj kartojn sur la sekvanta ekrano."
-#: ../../share/advertising/02-community.pl:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
-msgstr ""
+msgid "Add user"
+msgstr "Aldonu uzanto"
-#: ../../share/advertising/02-community.pl:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
-msgstr ""
+msgid "RAID-disks %s\n"
+msgstr "RAID-aj (Redundanca Aro de Malmultekostaj Diskoj) diskoj %s\n"
-#: ../../share/advertising/02-community.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid "Build the future of Linux!"
-msgstr ""
+msgid "Liberia"
+msgstr "Liberio"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
msgstr ""
-#: ../../share/advertising/03-software.pl:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
-msgstr ""
+msgid "Choose your keyboard"
+msgstr "Elektu vian klavaron"
-#: ../../share/advertising/03-software.pl:1
+#: ../../steps.pm:1
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr ""
+msgid "Format partitions"
+msgstr "Formatu subdiskojn"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Automatic correction of CUPS configuration"
+msgstr "Post-instala konfigurado"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Running \"%s\" ..."
+msgstr "Legas datumbason de CUPS peliloj..."
+
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
+msgid "enable radio support"
msgstr ""
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "Interreta Konfigurado"
+msgid "Scanner sharing to hosts: "
+msgstr "Printilo"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
-msgstr ""
+msgid "Loopback file name: %s"
+msgstr "Retrokonekta dosieronomo: %s"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "A customizable environment"
+msgid "Do not transfer printers"
msgstr ""
-#: ../../share/advertising/06-development.pl:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Delay before booting the default image"
+msgstr "Prokrastoperiodo antaĆ­ starti defaĆ­ltan sistemon"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+" DUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
msgstr ""
+"Tiu ĉi programo estas libera softvaro; vi povas redisdoni ĝin kaj/aƭ modifi\n"
+"ĝin sub la termoj de la GNU-Ĝeneralpublika Licenco kiel publikigita de\n"
+"la Libera Programar FondaĔo (Free Software Foundation); aƭ versio 2, aƭ\n"
+"laĆ­ via opcio) pli posta versio.\n"
+"\n"
+"Tiu ĉi programo estas disdonata kun la espero ke ĝi estu utila,\n"
+"sed SEN IA GARANTIO; eĉ sen garantio pri MERKATOTAUXGECO aƭ\n"
+"TAUXGECO POR APARTA CELO. Vidu la\n"
+"GNU Ĝeneralpublikan Licencon pri pli da detaloj.\n"
+"\n"
+"Vi devus esti ricevinta kopion de la GNU Ĝeneralpublika Licenco\n"
+"kun tiu ĉi programo; se ne, skribu al la Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-#: ../../share/advertising/06-development.pl:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check for multisession CD"
+msgstr "Bonvolu klaki sur subdiskon"
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "user"
+msgstr "Salutnomo"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Hard Disk to backup"
+msgstr "Malbona rezerva dosiero"
+
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr ""
+msgid "Configure"
+msgstr "Konfiguru"
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scannerdrake"
+msgstr "Elektu grafikan karton"
+
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
msgstr ""
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Turn your computer into a reliable server"
+msgid "Backup Users"
msgstr ""
-#: ../../share/advertising/08-store.pl:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
msgstr ""
+"Bonvole enigu vian poƝtejon.\n"
+"Via poƝtejo devus esti plene specifita poƝtejo,\n"
+"ekzemple ``miakomputilo.mialaborejo.miafirmao.com''.\n"
+"Vi ankaĆ­ povas enigi la IP-adreson de la prokura kluzo se via havas unu."
-#: ../../share/advertising/08-store.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Select Printer Spooler"
+msgstr "Elektu Printilan Konekton"
+
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Create new theme"
+msgstr "Kreu novan subdiskon"
+
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The official MandrakeSoft Store"
+msgid "Mandrake Tools Explanation"
msgstr ""
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "No image found"
+msgstr "Loka printilo"
+
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
msgstr ""
+"Iuj gravaj pakaĔoj ne estis taƭge instalata.\n"
+"AĆ­ via KDROM drajvo aĆ­ via KDROM disko estas difektita.\n"
+"Kontrolu la KDROM sur instalata komputilo per\n"
+"\"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-#: ../../share/advertising/09-mdksecure.pl:1
-#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
-msgstr ""
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Detected model: %s"
+msgstr "Duobla surmetingo %s"
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakedm:1
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Optimize your security by using Mandrake Linux"
+msgid "if set to yes, run the daily security checks."
msgstr ""
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr ""
+msgid "Azerbaijan"
+msgstr "Azerbajĝano"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
+msgid "No tape in %s!"
msgstr ""
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr ""
+msgid "Dvorak (US)"
+msgstr "Dvorak-a (US)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr ""
+msgid "How is the printer connected?"
+msgstr "Kiel estas la printilo konektata?"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Become a MandrakeExpert"
-msgstr "Spertulo"
+msgid "Security level"
+msgstr "Elektas sekurnivelon"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
-#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr ""
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "final resolution"
+msgstr "Distingivo"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr ""
+msgid "Services"
+msgstr "Servoj"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
-#, fuzzy, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "Spertulo"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "4 MB"
+msgstr "4 MB"
#: ../../share/compssUsers:999
#, fuzzy
@@ -17215,10 +17268,6 @@ msgid ""
msgstr ""
#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Laborstacio"
-
-#: ../../share/compssUsers:999
#, fuzzy
msgid "Game station"
msgstr "Dokumentaro"
@@ -17294,10 +17343,6 @@ msgid ""
msgstr ""
#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Gnoma Laborstacio"
@@ -17316,11 +17361,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr ""
#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Development"
-msgstr "Programisto"
-
-#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "C kaj C++ programadaj bibliotekoj, programoj kaj ĉapdosieroj"
@@ -17394,36 +17434,64 @@ msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr ""
#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Audio station"
-msgstr "Plurmedia - Sono"
-
-#: ../../share/compssUsers:999
-msgid "Sound playing/editing programs"
+msgid "Set of tools to read and send mail and news and to browse the Web"
msgstr ""
-#: ../../share/compssUsers:999
+#~ msgid "Internet connection & configuration"
+#~ msgstr "Interreta konektaĔo kaj konfiguro"
+
+#~ msgid "Configure the connection"
+#~ msgstr "Konfiguru la konekton"
+
+#~ msgid "Disconnect"
+#~ msgstr "Malkonektu"
+
+#~ msgid "Connect"
+#~ msgstr "Konektu"
+
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Vi povas rekonfiguri vian konekton."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Vi povas konekti al interreto aĆ­ rekonfiguri vian konekton."
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "Vi estas nun ne konektita kun interreto."
+
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "Vi estas nun konektita al Interreto."
+
#, fuzzy
-msgid "Video station"
-msgstr "Dokumentaro"
+#~ msgid "Write %s"
+#~ msgstr "XFree %s"
-#: ../../share/compssUsers:999
-msgid "Video playing programs"
-msgstr ""
+#, fuzzy
+#~ msgid "Author:"
+#~ msgstr "AĆ­tomate esploru"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Graphic station"
-msgstr "Dokumentaro"
+#~ msgid "Audio station"
+#~ msgstr "Plurmedia - Sono"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Graphics programs"
-msgstr "Grafika karto: %s"
+#~ msgid "Video station"
+#~ msgstr "Dokumentaro"
-#: ../../share/compssUsers:999
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr ""
+#, fuzzy
+#~ msgid "Graphic station"
+#~ msgstr "Dokumentaro"
+
+#, fuzzy
+#~ msgid "Graphics programs"
+#~ msgstr "Grafika karto: %s"
#~ msgid "no network card found"
#~ msgstr "neniu retkarto trovita"
@@ -17553,10 +17621,6 @@ msgstr ""
#~ "/boot."
#, fuzzy
-#~ msgid "Upgrade"
-#~ msgstr "Ĝisdatigu"
-
-#, fuzzy
#~ msgid "Do you want to configure another printer?"
#~ msgstr "Ĉu vi deziras provi la konfiguraĔon?"
diff --git a/perl-install/share/po/es.po b/perl-install/share/po/es.po
index 43d4f83cd..2b1e2bf62 100644
--- a/perl-install/share/po/es.po
+++ b/perl-install/share/po/es.po
@@ -7,7 +7,7 @@
msgid ""
msgstr ""
"Project-Id-Version: es\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
"PO-Revision-Date: 2003-03-13 06:39-0300\n"
"Last-Translator: Fabian Mandelbaum <fmandelbaum@hotmail.com>\n"
"Language-Team: Español <es@li.org>\n"
@@ -16,966 +16,1928 @@ msgstr ""
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.0.1\n"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Scanning partitions to find mount points"
+msgstr "Rastreando las particiones para encontrar los puntos de montaje"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of suid root files."
+msgstr ""
+"si se pone en sĂ­, verificar adiciones/remociones de archivos suid root."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t\tErase=%s"
+msgstr "\t\tErase=%s"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "network printer port"
+msgstr "puerto de impresora de red"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Please insert floppy disk:"
+msgstr "Por favor, inserte un disquete:"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "PCMCIA"
+msgstr "PCMCIA"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
+"The backup partition table has not the same size\n"
+"Still continue?"
msgstr ""
-"La comparticiĂłn por usuario utiliza el grupo \"fileshare\". \n"
-"Puede utilizar UserDrake para añadir un usuario a este grupo."
+"La tabla de particiones de respaldo no tiene\n"
+"el mismo tamaño. ¿Desea continuar de todas formas?"
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Cancel"
-msgstr "Cancelar"
+msgid "Which username"
+msgstr "Qué nombre de usuario"
#: ../../any.pm:1
#, c-format
-msgid "Launch userdrake"
-msgstr "Lanzar UserDrake"
+msgid "Which type of entry do you want to add?"
+msgstr "¿Qué tipo de entrada desea añadir?"
-#: ../../any.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Restore partition table"
+msgstr "Restaurar la tabla de particiones"
+
+#: ../../printer/cups.pm:1
+#, c-format
+msgid "On CUPS server \"%s\""
+msgstr "En servidor CUPS \"%s\""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Post-install configuration"
+msgstr "ConfiguraciĂłn posterior a la instalaciĂłn"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``%s'' instead"
+msgstr "Use \"%s\" en su lugar"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Type"
+msgstr "Tipo"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
"\n"
-"\"Custom\" permit a per-user granularity.\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
msgstr ""
-"ÂżDesea permitir a los usuarios exportar algunos directorios personales?\n"
-"Si lo hace, los usuarios podrĂĄn simplemente hacer clic sobre \"Compartir\" "
-"en Konqueror y Nautilus.\n"
"\n"
-"\"Personalizar\" permite una granularidad por usuario.\n"
+"Tampoco se pueden transferir las impresoras configuradas con los archivos "
+"PPD provistos por sus fabricantes o con controladores CUPS nativos."
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Falta el paquete obligatorio %s"
+msgid "Sri Lanka"
+msgstr "Sri Lanka"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
-msgstr "Puede exportar usando NFS o Samba. ÂżCuĂĄl elige"
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr ""
+"Las siguientes impresoras\n"
+"\n"
+"%s%s\n"
+"estĂĄn conectadas directamente a su sistema"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Se necesita instalar el paquete %s. ÂżQuiere instalarlo?"
+msgid "Central African Republic"
+msgstr "RepĂșblica Centroafricana"
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Custom"
-msgstr "Personalizada"
+msgid "Gateway device"
+msgstr "Dispositivo de pasarela de red"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Allow all users"
-msgstr "Permitir a todos los usuarios"
+msgid "Net Method:"
+msgstr "MĂ©todo de red:"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "No sharing"
-msgstr "No compartir"
+msgid "Ethernetcard"
+msgstr "Tarjeta Ethernet"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "More"
-msgstr "MĂĄs"
+msgid "Parameters"
+msgstr "ParĂĄmetros"
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Here is the full list of available countries"
-msgstr "AquĂ­ tiene la lista completa de paĂ­ses disponibles"
+msgid "Auto-detect"
+msgstr "DetecciĂłn automĂĄtica"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please choose your country."
-msgstr "Seleccione su paĂ­s, por favor."
+msgid "Interface:"
+msgstr "Interfaz:"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid " / Region"
-msgstr " / RegiĂłn"
+msgid "Select installation class"
+msgstr "Tipo de instalaciĂłn"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Country"
-msgstr "PaĂ­s"
+msgid "on CDROM"
+msgstr "en CDROM"
-#: ../../any.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "All languages"
-msgstr "Todos los idiomas"
+msgid ""
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
+msgstr ""
+"El sistema no parece estar conectado a la Internet.\n"
+"Intente volver a configurar su conexiĂłn."
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use Unicode by default"
-msgstr "Usar Unicode predeterminadamente"
+msgid ""
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
+msgstr ""
+"Conecte su impresora a un servidor Linux y permita que su(s) mĂĄquina(s) "
+"Windows se conecten al mismo como un cliente.\n"
+"\n"
+"ÂżRealmente desea continuar configurando esta impresora como lo estĂĄ haciendo?"
-#: ../../any.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Belarus"
+msgstr "Bielorrusia"
+
+#: ../../partition_table.pm:1
+#, c-format
+msgid "Error writing to file %s"
+msgstr "Error al escribir en el archivo %s"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
msgstr ""
-"Mandrake Linux puede soportar mĂșltiples idiomas. Seleccione\n"
-"los que desea instalar. Los mismos estarĂĄn disponibles cuando\n"
-"su instalación esté completa y Usted reinicie su sistema."
+"apmd se usa para monitorizar el estado de las baterĂ­as y enviar esa\n"
+"información a syslogd. También puede usarse para apagar el equipo cuando\n"
+"la baterĂ­a estĂĄ casi descargada."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose a language to use."
-msgstr "Por favor, elija el idioma a usar."
+msgid "Use tape to backup"
+msgstr "Usar cinta para realizar respaldo"
-#: ../../any.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Choose the window manager to run:"
-msgstr "Elija el gestor de ventanas a ejecutar:"
+msgid "The following packages are going to be installed"
+msgstr "Se van a instalar los siguientes paquetes"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the default user:"
-msgstr "Elija el usuario predeterminado:"
+msgid "CUPS configuration"
+msgstr "ConfiguraciĂłn de CUPS"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to use this feature?"
-msgstr "ÂżDesea usar esta caracterĂ­stica?"
+msgid "Hong Kong"
+msgstr "Hong Kong"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr ""
-"Puedo configurar su computadora para que entre automĂĄticamente con un "
-"usuario."
+msgid "Not enough free space to allocate new partitions"
+msgstr "No hay espacio libre suficiente para asignar las particiones nuevas"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Autologin"
-msgstr "ConexiĂłn automĂĄtica"
+msgid "Moving"
+msgstr "Desplazando"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Icon"
-msgstr "Icono"
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
+msgstr ""
+"\n"
+"Actividades de Drakbackup por medio de %s:\n"
+"\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Shell"
-msgstr "Shell"
+msgid "("
+msgstr "("
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Password (again)"
-msgstr "Contraseña (de nuevo)"
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgstr ""
+"Bienvenido al asistente para la configuraciĂłn de la red\n"
+"\n"
+"Estamos a punto de configurar su conexiĂłn de red/Internet.\n"
+"Si no desea usar la detecciĂłn automĂĄtica, desmarque la casilla.\n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "Password"
-msgstr "Contraseña"
+msgid ")"
+msgstr ")"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "User name"
-msgstr "Nombre del usuario"
+msgid "Lebanon"
+msgstr "LĂ­bano"
-#: ../../any.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Real name"
-msgstr "Nombre y apellidos"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Accept user"
-msgstr "Aceptar el usuario"
+msgid "Stop"
+msgstr "Parar"
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Done"
-msgstr "Hecho"
+msgid "Edit selected host"
+msgstr "Editar host seleccionado"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Introduzca un usuario\n"
-"%s"
+msgid "No CD device defined!"
+msgstr "ÂĄNo se definiĂł dispositivo de CD!"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Add user"
-msgstr "Añadir un usuario"
+msgid "Bulgarian (phonetic)"
+msgstr "BĂșlgaro (fonĂ©tico)"
-#: ../../any.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "This user name has already been added"
-msgstr "Este nombre de usuario ya fue añadido"
+msgid "The DHCP start ip"
+msgstr "Primera IP del rango de DHCP"
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "The user name is too long"
-msgstr "El nombre de usuario es muy largo"
+msgid "256 kB"
+msgstr "256 KB"
#: ../../any.pm:1
#, c-format
+msgid "Bootloader main options"
+msgstr "Opciones principales del cargador de arranque"
+
+#: ../../standalone.pm:1
+#, c-format
msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
msgstr ""
-"El nombre de usuario (login) sĂłlo debe contener letras, nĂșmeros, `-' y `_'"
+"[--manual] [--device=disp.] [--update-sane=dir_fuente_sane] [--update-"
+"usbtable] [--dynamic=disp.]"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Please give a user name"
-msgstr "Introduzca el nombre de usuario"
+msgid "Tape"
+msgstr "Cinta"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This password is too simple"
-msgstr "Esta contraseña es demasiado sencilla"
+msgid "Scanning network..."
+msgstr "Buscando en la red ..."
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please try again"
-msgstr "Vuelva a intentarlo, por favor"
+msgid ""
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
+msgstr ""
+"Con esta opciĂłn podrĂĄ restaurar cualquier versiĂłn de su\n"
+"directorio /etc."
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The passwords do not match"
-msgstr "Las contraseñas no coinciden"
+msgid "Malaysia"
+msgstr "Malasia"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "(already added %s)"
-msgstr "(%s ya fue añadido)"
+msgid "Swiss (French layout)"
+msgstr "Suizo (francés)"
-#: ../../any.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "access to compilation tools"
-msgstr "acceso a herramientas de compilaciĂłn"
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "Falló mkraid (¿quizås no estén las herramientas de raid (raidtools)?)"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "access to network tools"
-msgstr "acceso a herramientas de red"
+msgid "Webcam"
+msgstr "CĂĄmara web"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "size of the (second level) cpu cache"
+msgstr "Tamaño del caché del CPU (de 2do nivel)"
+
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "access to administrative files"
-msgstr "acceso a archivos administrativos"
+msgid "Soundcard"
+msgstr "Tarjeta de sonido"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "allow \"su\""
-msgstr "permitir \"su\""
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
+msgstr ""
+"Para imprimir un archivo desde la lĂ­nea de comando (ventana de terminal) use "
+"el comando \"%s <archivo>\".\n"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "access to rpm tools"
-msgstr "acceso a herramientas rpm"
+msgid "Level %s\n"
+msgstr "Nivel %s\n"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to X programs"
-msgstr "acceso a programas X"
+msgid "Luxembourg"
+msgstr "Luxemburgo"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"\n"
+" DrakBackup Daemon Report\n"
+"\n"
+"\n"
msgstr ""
-"AquĂ­ estĂĄn las diferentes entradas.\n"
-"Puede añadir otras o cambiar las que ya existen."
+"\n"
+" Reporte del servidor DrakBackup\n"
+"\n"
+"\n"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other OS (windows...)"
-msgstr "Otro SO (Windows...)"
+msgid "Iran"
+msgstr "IrĂĄn"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Otro SO (MacOS...)"
+msgid "Bus"
+msgstr "Bus"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Otro SO (SunOS...)"
+msgid "Iraq"
+msgstr "Iraq"
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Linux"
-msgstr "Linux"
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr ""
+"ÂĄSe encontrĂł un conflicto potencial de direcciones LAN en la configuraciĂłn "
+"de %s!\n"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "¿Qué tipo de entrada desea añadir?"
+msgid "Configuring..."
+msgstr "Configurando..."
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "This label is already used"
-msgstr "Esta etiqueta ya estĂĄ en uso"
+msgid "The setup has already been done, and it's currently enabled."
+msgstr "La configuraciĂłn ya se ha hecho, y ahora estĂĄ activada."
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "You must specify a root partition"
-msgstr "Debe especificar una particiĂłn raĂ­z"
+msgid ""
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
+msgstr ""
+"El mĂłdulo bttv del nĂșcleo GNU/Linux simplemente detecta automĂĄticamente los "
+"parĂĄmetros correctos para la mayorĂ­a de las tarjetas de TV modernas.\n"
+"Si no se detecta correctamente la suya, aquĂ­ puede forzar los tipos de "
+"tarjeta y sintonizador adecuados. Simplemente seleccione los parĂĄmetros de "
+"su tarjeta de TV si lo necesita."
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "You must specify a kernel image"
-msgstr "Debe especificar una imagen del nĂșcleo"
+msgid "Password (again)"
+msgstr "Contraseña (de nuevo)"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Empty label not allowed"
-msgstr "No se admite una etiqueta vacĂ­a"
+msgid "Search installed fonts"
+msgstr "Buscar tipografĂ­as instaladas"
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Default"
-msgstr "Por defecto"
+msgid "Venezuela"
+msgstr "Venezuela"
-#: ../../any.pm:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "NoVideo"
-msgstr "Sin vĂ­deo"
+msgid "IP address"
+msgstr "DirecciĂłn IP"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Initrd-size"
-msgstr "Tamaño de initrd"
+msgid "Choose the sizes"
+msgstr "Elija los tamaños"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Append"
-msgstr "Añadir"
+msgid ""
+"List of data corrupted:\n"
+"\n"
+msgstr ""
+"Lista de datos corruptos:\n"
+"\n"
-#: ../../any.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Label"
-msgstr "Etiqueta"
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
+msgstr ""
+"El sistema no soporta a su mĂłdem.\n"
+"Eche un vistazo en http://www.linmodems.org"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Unsafe"
-msgstr "Inseguro"
+msgid "Choose another partition"
+msgstr "Elija otra particiĂłn"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Table"
-msgstr "Tabla"
+msgid "Current user"
+msgstr "Usuario corriente"
-#: ../../any.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Root"
-msgstr "RaĂ­z"
+msgid "Username"
+msgstr "Nombre de usuario"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Read-write"
-msgstr "Lectura/Escritura"
+msgid "Left \"Windows\" key"
+msgstr "Tecla \"Windows\" de la izquierda"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid "dhcpd Server Configuration"
+msgstr "ConfiguraciĂłn del servidor dhcpd"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Video mode"
-msgstr "Modo de vĂ­deo"
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
+msgstr ""
+"Usado para directorio:\n"
+" sólo el dueño del directorio o archivo en este directorio lo puede borrar"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Image"
-msgstr "Imagen"
+msgid "Guyana"
+msgstr "Guyana"
-#: ../../any.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Default OS?"
-msgstr "ÂżSO predeterminado?"
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr " en servidor Novell \"%s\", impresora \"%s\""
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Enable OF Boot?"
-msgstr "ÂżHabilitar el arranque de OF?"
+msgid "Remove a module"
+msgstr "Quitar un mĂłdulo"
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Enable CD Boot?"
-msgstr "ÂżHabilitar el arranque desde CD?"
+msgid "Password"
+msgstr "Contraseña"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Tiempo de espera de arranque del nĂșcleo"
+msgid ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
+msgstr ""
+"Argumentos: (max, inactive=-1)\n"
+"\n"
+"Configurar edad de contraseñas en \\fImax\\fP días y demorar el cambio a "
+"\\fIinactive\\fP."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Open Firmware Delay"
-msgstr "Demora de Open firmware"
+msgid "Advanced Configuration"
+msgstr "ConfiguraciĂłn avanzada"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Boot device"
-msgstr "Dispositivo de arranque"
+msgid "Scanning on your HP multi-function device"
+msgstr "Escaneo en su dispositivo multifunciĂłn HP"
#: ../../any.pm:1
#, c-format
-msgid "Init Message"
-msgstr "Mensaje de inicio"
+msgid "Root"
+msgstr "RaĂ­z"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Bootloader to use"
-msgstr "Cargador de arranque a usar"
+msgid "Choose an existing RAID to add to"
+msgstr "Elegir un RAID existente al que añadir"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Bootloader main options"
-msgstr "Opciones principales del cargador de arranque"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "Turco (modelo \"Q\" moderno)"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Lilo message not found"
+msgstr "no se encuentra el mensaje de LiLo"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
msgstr ""
-"La opciĂłn \"Restringir las opciones de la lĂ­nea de comandos\"\n"
-"no tiene sentido sin contraseña"
+"RegeneraciĂłn automĂĄtica de la cabecera del nĂșcleo en /boot para\n"
+"/usr/include/linux/{autoconf,version}.h"
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Give the ram size in MB"
-msgstr "Proporcione el tamaño de la RAM en MB"
+msgid "if needed"
+msgstr "si es necesario"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Enable multiple profiles"
-msgstr "Activar perfiles mĂșltiples"
+msgid "Restore Failed..."
+msgstr "FallĂł la restauraciĂłn..."
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Precise el tamaño de la RAM si es necesario (se encontraron %d MB)"
+msgid "/Autodetect _jazz drives"
+msgstr "/Autodetectar unidades _jazz"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Limpiar /tmp en cada inicio del equipo"
+msgid ""
+"Description:\n"
+"\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
+"\n"
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
+"\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
+"\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
+"\n"
+"\n"
+msgstr ""
+"DescripciĂłn:\n"
+"\n"
+" Drakbackup se usa para respaldar su sistema.\n"
+" Durante la configuraciĂłn puede seleccionar:\n"
+"\t- Archivos del sistema,\n"
+"\t- Archivos de usuarios,\n"
+"\t- Otros archivos.\n"
+"\to Todo su sistema ... y Otros (como Particiones Windows)\n"
+"\n"
+" Drakbackup le permite respaldar su sistema sobre:\n"
+"\t- Disco rĂ­gido.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (con autoboot, rescue y autoinstall.)\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Cinta.\n"
+"\n"
+" Drakbackup le permite restaurar su sistema a un\n"
+" directorio seleccionado por el usuario.\n"
+"\n"
+" Predeterminadamente se almacenarĂĄn todos los respaldos en\n"
+" su directorio /var/lib/drakbackup.\n"
+"\n"
+" Archivo de configuraciĂłn:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"\n"
+"Paso de restauraciĂłn:\n"
+" \n"
+" Durante la restauraciĂłn, DrakBackup quitarĂĄ su \n"
+" directorio original y verificarĂĄ que todos \n"
+" los archivos de respaldo no estén corruptos. Se \n"
+" recomienda que haga un Ășltimo respaldo antes de restaurar.\n"
+"\n"
+"\n"
-#: ../../any.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "Create a bootdisk"
-msgstr "Crear un disco de arranque"
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
+msgstr ""
+"EL PRESENTE TEXTO ES UNA TRADUCCIÓN A PROPÓSITO EXCLUSIVAMENTE\n"
+"INFORMATIVO DE LOS TÉRMINOS DE LA LICENCIA DE MANDRAKE LINUX. EN\n"
+"NINGÚN CASO LA PRESENTE TRADUCCIÓN TIENE VALOR LEGAL SIENDO OFICIAL\n"
+"EXCLUSIVAMENTE LA VERSIÓN EN FRANCÉS DE LA LICENCIA DE LINUX-MANDRAKE.\n"
+"No obstante, esperamos que esta traducciĂłn ayudarĂĄ a los que hablan\n"
+"castellano a entenderla mejor.\n"
+"\n"
+"\n"
+"IntroducciĂłn\n"
+"\n"
+"El conjunto de elementos que incluye el sistema operativo y los\n"
+"diferentes componentes disponibles en la distribuciĂłn Mandrake Linux\n"
+"se denominarĂĄn en adelante \"Programas\". Los programas incluyen en\n"
+"particular, pero de manera no limitativa, el conjunto de programas,\n"
+"procedimientos, reglas y documentaciones relativas al sistema\n"
+"operativo y a los diferentes componentes de la distribuciĂłn\n"
+"Mandrake Linux.\n"
+"\n"
+"\n"
+"1. Licencia\n"
+"\n"
+"Le rogamos leer cuidadosamente este documento. Éste constituye un\n"
+"contrato de licencia entre Ud. (persona fĂ­sica o persona moral) y\n"
+"MandrakeSoft S.A. aplicado a los programas. El hecho de instalar, \n"
+"duplicar o usar los programas de cualquier manera, indica\n"
+"que acepta explícitamente los términos y condiciones de esta licencia\n"
+"y que estå totalmente de acuerdo en lo referente a los términos de la "
+"misma.\n"
+"En caso de no estar de acuerdo con el presente documento, no estĂĄ\n"
+"autorizado a instalar, duplicar ni usar de ninguna manera\n"
+"este producto. El contrato de licencia sera automĂĄticamente anulado\n"
+"sin aviso previo en el caso que no se cumplan las disposiciones\n"
+"de este documento. En caso de anulaciĂłn Ud. tendrĂĄ que anular\n"
+"inmediatamente todo ejemplar y todas las copias de todos los programas\n"
+"y de todas las documentaciones que constituyen el sistema operativo y\n"
+"los diferentes componentes disponibles en en la distribuciĂłn\n"
+"Mandrake Linux.\n"
+"\n"
+"\n"
+"2. GarantĂ­a y limitaciones de garantĂ­a\n"
+"\n"
+"Los programas y la documentación que los acompaña son proporcionados\n"
+"tal cual y sin ninguna garantĂ­a. MandrakeSoft S.A.\n"
+"no se responsabiliza de las consecuencias de un daño directo,\n"
+"especial, indirecto o accesorio, de cualquiera naturaleza que sea, en\n"
+"relaciĂłn con la utilizaciĂłn de los programas, en particular y de\n"
+"manera no limitada, todos daños resultados por perdidas de\n"
+"beneficio, interrupción de actividad, pérdida de informaciones\n"
+"comerciales u otras perdidas financieras, asĂ­ que por eventuales\n"
+"condenaciones e indemnizaciones debidas como consecuencia de una decisiĂłn "
+"de\n"
+"la justicia, y eso incluso si MandrakeSoft S.A. hubiera sido informada de "
+"la\n"
+"aparición o eventualidad de tales daños.\n"
+"\n"
+"ADVERTENCIA EN CUANTO A LA POSESIÓN O USO DE PROGRAMAS PROHIBIDOS\n"
+"EN CIERTOS PAÍSES\n"
+"\n"
+"En ningĂșn caso, ni MandrakeSoft S.A. ni sus proveedores podrĂĄn ser\n"
+"responsabilizados por un perjuicio especial, directo, indirecto o\n"
+"accesorio, de cualquier naturaleza (en particular y de manera\n"
+"no limitada, pérdidas de beneficio, interrupción de actividad,\n"
+"pérdida de informaciones comerciales u otras pérdidas financieras, así\n"
+"como por posibles condenaciones e indemnizaciones debidas\n"
+"consecuentes a una decisiĂłn de justicia) que resultarĂ­a de la\n"
+"utilizaciĂłn, detenciĂłn o simple descarga desde uno de los sitios de\n"
+"transferencia de Mandrake Linux de programas prohibidos por la\n"
+"legislaciĂłn a la que estĂĄ sometido. Esta advertencia se aplica en\n"
+"particular a algunos componentes de criptografĂ­a fuerte incluĂ­dos en los\n"
+"programas.\n"
+"\n"
+"\n"
+"3. Licencia GPL y otras licencias\n"
+"\n"
+"Los Programas estĂĄn constituidos por mĂłdulos de programas creados por\n"
+"diversas personas (fĂ­sicas o legales). Muchos de ellos se\n"
+"distribuyen bajo los tĂ©rminos de la Licencia PĂșblica General GNU\n"
+"(denominada a partir de ahora \"GPL\") u otras licencias parecidas. La "
+"mayorĂ­a\n"
+"de estas licencias le permiten copiar, adaptar o redistribuir los\n"
+"mĂłdulos de los programas que cubren. Haga el favor de leer y de aceptar los "
+"términos y\n"
+"condiciones de las licencias que acompañan a cada uno de ellos antes de\n"
+"usarlos. Toda pregunta relativa a la licencia se debe dirigir al autor\n"
+"(o su representante) de dicho programa, y no a MandrakeSoft. Los\n"
+"programas desarrollados por MandrakeSoft estĂĄn sometidos a la licencia\n"
+"GPL. La documentaciĂłn escrita por MandrakeSoft esta sometida a una\n"
+"licencia especifica. Haga el favor de dirigirse a la documentaciĂłn para\n"
+"obtener mĂĄs informaciĂłn.\n"
+"\n"
+"\n"
+"4. Propiedad intelectual\n"
+"\n"
+"Todos los derechos, tĂ­tulos e intereses de los diferentes programas\n"
+"son propiedad exclusiva de sus autores respectivos y estĂĄn protegidos\n"
+"por el derecho de la propiedad intelectual y otras leyes aplicadas a los\n"
+"derechos de los programas. Las marcas \"Mandrake\" y \"Mandrake Linux\" "
+"asĂ­\n"
+"como los logotipos asociados son registrados por MandrakeSoft S.A.\n"
+"\n"
+"\n"
+"5. Disposiciones diversas\n"
+" \n"
+"Si alguna disposiciĂłn de este contrato de licencia fuera declarada\n"
+"nula, ilegal o inaplicable por un tribunal competente, esta\n"
+"disposiciĂłn serĂ­a excluida del presente contrato. Sin embargo\n"
+"Ud. seguirĂĄ sometido a las otras disposiciones, que tendrĂĄn\n"
+"plenos efectos. El contrato de licencia estĂĄ regido por las leyes\n"
+"francesas. Toda disputa relativa a los presentes términos serå\n"
+"resuelta, preferentemente, por vĂ­a amigable. En caso de desacuerdo con\n"
+"MandrakeSoft S.A., el litigio serĂĄ tramitado a los tribunales\n"
+"competentes de ParĂ­s, Francia. Para cualquier pregunta relacionada con\n"
+"este documento, por favor, pĂłngase en contacto con MandrakeSoft S.A.\n"
-#: ../../any.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "restrict"
-msgstr "restringir"
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
+msgstr ""
+"coordenada x del ĂĄngulo superior\n"
+"izquierdo de la barra de progreso"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Restrict command line options"
-msgstr "Restringir las opciones de la lĂ­nea de comandos"
+msgid "Current interface configuration"
+msgstr "ConfiguraciĂłn corriente de la interfaz"
+
+#: ../../printer/data.pm:1
+#, c-format
+msgid "LPD - Line Printer Daemon"
+msgstr "LPD - Line Printer Daemon (Demonio de impresora de lĂ­neas)"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
+msgstr ""
+"\n"
+"Si tiene una tarjeta ISA, los valores de la prĂłxima pantalla deberĂ­an ser "
+"correctos.\n"
+"\n"
+"Si tiene una tarjeta PCMCIA, tiene que saber la irq y la e/s de su tarjeta.\n"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Do not print any test page"
+msgstr "No imprimir ninguna pĂĄgina de prueba"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Gurmukhi"
+msgstr "Indio (Gurmukhi)"
#: ../../any.pm:1
#, c-format
msgid "Force No APIC"
msgstr "Forzar sin APIC"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Enable ACPI"
-msgstr "Habilitar ACPI"
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr ""
+"Esta contraseña es demasiado simple\n"
+"(tiene que tener por lo menos una longitud de %d caracteres)"
-#: ../../any.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Delay before booting default image"
-msgstr "Demora antes de arrancar la imagen predeterminada"
+msgid "[keyboard]"
+msgstr "[teclado]"
-#: ../../any.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "compact"
-msgstr "compacto"
+msgid "FTP proxy"
+msgstr "Proxy FTP"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Compact"
-msgstr "Compacto"
+msgid "Install List"
+msgstr "Instalar lista"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bootloader installation"
-msgstr "InstalaciĂłn del cargador de arranque"
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr ""
+"Cambiar la\n"
+"ruta de restauraciĂłn"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "First sector of boot partition"
-msgstr "Primer sector de la particiĂłn de arranque"
+msgid "Show only for the selected day"
+msgstr "Mostrar sĂłlo para el dĂ­a seleccionado"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Primer sector del disco (MBR)"
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
+"\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
+"\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
+"Generalidades de drakTermServ\n"
+"\t\t\t\n"
+" - Crear imĂĄgenes de arranque con Etherboot habilitado:\n"
+" \t\tPara arrancar un nĂșcelo por Etherboot, se debe crear una imagen de "
+"arranque initrd/nĂșcleo especial\n"
+" \t\tmkinitrd-net hace mucho de esto y drakTermServ sĂłlo es una "
+"interfaz grĂĄfica\n"
+" \t\tpara ayudar a administrar/personalizar estas imĂĄgenes.\n"
+"\n"
+" - Mantener /etc/dhcp.conf:\n"
+" \t\tPara arrancar los clientes desde la red, cada cliente necesita una "
+"entrada dhcpd.conf asignando una direcciĂłn IP\n"
+" \t\ty las imĂĄgenes de arranque para la mĂĄquina. drakTermServ ayuda a "
+"crear/quitar estas entradas.\n"
+"\t\t\t\n"
+" \t\t(Las tarjetas PCI pueden omitir la imagen - etherboot pedirĂĄ la "
+"imagen correcta. También\n"
+" \t\tdeberĂ­a considerar que cuando etherboot busca las imĂĄgenes, espera "
+"nombres como\n"
+" \t\tboot-3c59x.nbi, en vez de boot-3c59x.2.4.19-16mdk.nbi)\n"
+"\t\t\t\n"
+" \t\tUna entrada tĂ­pica de dhcpd.conf para soportar un cliente sin "
+"disco luce asĂ­:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\thardware ethernet\t00:20:af:2f:7f:9d;\n"
+"\t\t\t\tfixed address\t\t192.168.192.3;\n"
+"\t\t\t\t/*type\t\t\tfat;*/\n"
+"\t\t\t\tfilename\t\t\"i386/boot/boot-3c509.2.4.18-6mdk.nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tSi bien puede utilizar una cantidad de direcciones IP, en vez de "
+"configurar una entrada\n"
+"\t\t\tespecĂ­fica para cada cliente, usar un esquema de direcciones fijas "
+"facilita el uso\n"
+"\t\t\tde la funcionalidad de archivos de configuraciĂłn especĂ­ficos para los "
+"clientes\n"
+"\t\t\tque brinda ClusterNFS.\n"
+"\t\t\t\n"
+"\t\t\tNota: La entrada \"/*type\" sĂłlo la utiliza drakTermServ. Los "
+"clientes pueden ser \"thin\"*/\n"
+"\t\t\to 'fat'. Los clientes livianos corren la mayorĂ­a del software en el "
+"servidor por medio de xdmcp, mientras que los clientes pesados corren la "
+"mayorĂ­a\n"
+"\t\t\tdel software en la mĂĄquina cliente. Un inittab especial, /etc/inittab\\"
+"$\\$IP=client_ip\\$\\$ se\n"
+"\t\t\tescribe para los clientes livianos. Los archivos de configuraciĂłn del "
+"sistema xdm-config, kdmrc, y gdm.conf se modifican\n"
+"\t\t\tsi se utilizan clientes livianos, para habilitar xdmcp. Debido a que "
+"hay problemas de seguridad al utilizar xdmcp,\n"
+"\t\t\thosts.deny y hosts.allow se modifican para limitar el acceso a la "
+"subred local.\n"
+"\t\t\t\n"
+"\t\t\tNota: Debe detener/iniciar el servidor luego de añadir o cambiar "
+"clientes.\n"
+"\t\t\t\n"
+" - Maintener /etc/exports:\n"
+" \t\tClusternfs permite exportar la raĂ­z del sistema de archivos a "
+"los clientes sin disco. drakTermServ\n"
+" \t\tconfigura la entrada correcta para permitir acceso anĂłnimo al "
+"sistema de archivos raĂ­z desde\n"
+" \t\tlos clientes sin disco.\n"
+"\n"
+" \t\tUna entrada exports tĂ­pica para clusternfs es:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBRED/MÁSCARA(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tDonde SUBRED/MÁSCARA estån definidas por su red.\n"
+" \t\t\n"
+" - Maintener /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tPara que los usuarios puedan conectarse al sistema desde un "
+"cliente sin disco, la entrada en\n"
+" \t\t/etc/shadow debe duplicarse en /etc/shadow\\$\\$CLIENTS\\$\\$. "
+"drakTermServ ayuda\n"
+" \t\ten este aspecto añadiendo o quitando usuarios del sistema de "
+"este archivo.\n"
+"\n"
+" - /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$ por cliente:\n"
+" \t\tA través de clusternfs, cada cliente sin disco puede tener sus "
+"archivos de configuraciĂłn Ășnicos\n"
+" \t\ten el sist. de archivos raĂ­z del servidor. En el futuro "
+"drakTermServ ayudarĂĄ a crear\n"
+" \t\testos archivos.\n"
+"\n"
+" - Archivos de configuraciĂłn del sistema por cliente:\n"
+" \t\tA través de clusternfs, cada cliente sin disco puede tener sus "
+"archivos de configuraciĂłn Ășnicos\n"
+" \t\ten el sist. de archivos raĂ­z del servidor. En el futuro "
+"drakTermServ ayudarĂĄ a crear archivos\n"
+" \t\tcomo /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard sobre una base\n"
+" \t\tpor cliente.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ configurarĂĄ este archivo para trabajar en conjunto "
+"con las imĂĄgenes creadas\n"
+" \t\tpor mkinitrd-net, y las entradas en /etc/dhcpd.conf, para servir "
+"la imagen de arranque\n"
+" \t\ta cada cliente sin disco.\n"
+"\n"
+" \t\tUn archivo de configuraciĂłn tĂ­pico de tftp luce asĂ­:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tAquĂ­ los cambios con respecto a lo predeterminado son cambiar el "
+"flag disable a\n"
+" \t\t'no' y cambiar la ruta del directorio a /var/lib/tftpboot, donde "
+"mkinitrd-net\n"
+" \t\tpone sus imĂĄgenes.\n"
+"\n"
+" - Crear disquetes/CDs Etherboot:\n"
+" \t\tLas mĂĄquinas sin disco necesitan o bien imĂĄgenes ROM en las NIC, "
+"o un disquete o\n"
+" \t\tCD de arranque para iniciar la secuencia de arranque. "
+"drakTermServ ayudarĂĄ a generar estas,\n"
+" \t\tbasadas en la NIC en la mĂĄquina cliente.\n"
+" \t\t\n"
+" \t\tUn ejemplo bĂĄsico para crear un disquete de arranque para una "
+"3Com 3c509 manualmente:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin /\\n \t\t\t/usr/lib/"
+"etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "ÂżDĂłnde quiere instalar el cargador de arranque?"
+msgid "512 kB"
+msgstr "512 KB"
-#: ../../any.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "LILO/grub Installation"
-msgstr "InstalaciĂłn de LILO/grub"
+msgid "Logs"
+msgstr "Registros"
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "SILO Installation"
-msgstr "InstalaciĂłn de SILO"
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr "(Nota: no se pueden detectar automĂĄticamente los puertos paralelo)"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Skip"
-msgstr "Omitir"
+msgid "<control>N"
+msgstr "<control>N"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "On Floppy"
-msgstr "En disquete"
+msgid "What kind of card do you have?"
+msgstr "¿Qué tipo de tarjeta tiene?"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "First sector of the root partition"
-msgstr "Primer sector de la particiĂłn raĂ­z"
+msgid "<control>O"
+msgstr "<control>A"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Security"
+msgstr "Seguridad"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
msgstr ""
-"DecidiĂł instalar el cargador de arranque en una particiĂłn.\n"
-"Esto implica que ya tiene un cargador de arranque en el disco desde el que "
-"arranca (ej.: System Commander).\n"
-"\n"
-"¿Desde qué disco arranca?"
+"También puede utilizar el interfaz gråfico \"xpdq\" para configurar las "
+"opciones y manipular los trabajos de impresiĂłn.\n"
+"Si estĂĄ usando KDE como entorno de escritorio tiene un \"botĂłn de pĂĄnico\", "
+"un icono en su escritorio etiquetado como \"ÂĄDETENER impresora!\", que "
+"detiene todos los trabajos de impresiĂłn inmediatamente cuando hace clic en "
+"Ă©l. Esto es Ăștil, por ejemplo, para atascos de papel.\n"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Creating bootdisk..."
-msgstr "Creando el disquete de arranque"
+msgid "<control>Q"
+msgstr "<control>S"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Inserte un disquete en %s"
+msgid "Unknown"
+msgstr "Desconocido"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Elija la disquetera que desea usar para crear el disco de arranque"
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr "Este servidor ya estå en la lista, no se puede volver a añadir.\n"
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Second floppy drive"
-msgstr "Segunda disquetera"
+msgid "Network Configuration"
+msgstr "ConfiguraciĂłn de la red"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "First floppy drive"
-msgstr "Primera disquetera"
+msgid "<control>S"
+msgstr "<control>G"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "Disculpe, pero no hay ninguna disquetera disponible"
+msgid ""
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
+msgstr ""
+"Protocolo para el resto del mundo \n"
+" sin canal D (lĂ­neas alquiladas)"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s must be a number!"
+msgstr "ÂĄLa opciĂłn %s debe ser un nĂșmero!"
+
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#, c-format
+msgid "Notice"
+msgstr "Nota"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
msgstr ""
-"Un disquete de arranque personalizado da la posibilidad de arrancar su "
-"equipo\n"
-"bajo Linux sin depender del cargador de arranque normal. Esto puede ser "
-"Ăștil\n"
-"si no desea instalar LILO (o grub) en su sistema, o si cualquier otro "
-"sistema operativo borra\n"
-"LILO, o si LILO no funciona con su configuraciĂłn de hardware. Un disquete\n"
-"de arranque personalizado también se puede usar con la imagen de rescate de\n"
-"Mandrake haciendo asĂ­ mucho mĂĄs fĂĄcil la recuperaciĂłn en caso de fallo\n"
-"grave del sistema. ÂżDesea crear un disquete de arranque para su sistema?\n"
-"%s"
+"Argumentos: (arg)\n"
+"\n"
+"Activar/desactivar verificaciones diarias de seguridad."
-#: ../../any.pm:1
+#: ../../security/help.pm:1
+#, c-format
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
+"Argumentos: (arg)\n"
+"\n"
+"Habilitar/deshabilitar crontab y at para usuarios. Poner los permitidos en /"
+"etc/cron y /etc/at.allow\n"
+"(ver man at(1) y crontab(1))."
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr "No ha configurado a X ÂżEstĂĄ seguro que realmente desea esto?"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
+"La configuraciĂłn de la impresora se harĂĄ de forma totalmente automatizada. "
+"Si su impresora no se detectĂł correctamente o si prefiere una configuraciĂłn "
+"personalizada, active la \"ConfiguraciĂłn manual\"."
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "What type of partitioning?"
+msgstr "¿Qué tipo de particionamiento?"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"file list sent by FTP: %s\n"
+" "
+msgstr ""
+"lista de archivos envĂ­ada por FTP: %s\n"
+" "
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Interface"
+msgstr "Interfaz"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Options Description:\n"
"\n"
+" - Backup System Files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Backup User Files: \n"
+"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
+"\n"
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane. To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
msgstr ""
+"descripciĂłn de las opciones:\n"
+"\n"
+" - Respladar archivos del sistema:\n"
+" \n"
+"\tEsta opciĂłn permite respaldar su directorio /etc, que\n"
+"\tcontiene todos los archivos de configuraciĂłn. Por favor\n"
+"\ttenga cuidado durante la restauraciĂłn de no sobre-escribir:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Respaldar archivos de usuario:\n"
+"\n"
+"\tEsta opciĂłn permite seleccionar todos los usuarios que\n"
+"\tdesea respaldar.\n"
+"\tPara preservar espacio, se recomienda no incluir el\n"
+"\tcache del navegador web.\n"
+"\n"
+" - Respaldar otros archivos:\n"
+"\n"
+"\tEsta opción permite añadir mås datos a guardar.\n"
+"\tCon el otro respaldo no es posible, por ahora,\n"
+"\tseleccionar el respaldo incremental.\t\t\n"
+" \n"
+" - Respaldo incremental:\n"
+"\n"
+"\tEl respaldo incremental es la opciĂłn mĂĄs potente.\n"
+"\tLe permite respaldar todos sus datos la primera\n"
+"\tvez, y luego sĂłlo aquellos que cambiaron.\n"
+"\tLuego, podrĂĄ, durante la etapa de restauraciĂłn,n\trestaurar sus datos "
+"desde una fecha especificada.\n"
+"\t\n"
+"\tSi no ha seleccionado esta opciĂłn todos los\n"
+"\trespaldos antiguos se borran antes de volver a respaldar.\n"
"\n"
"\n"
-"(¡ATENCIÓN! Está utilizando XFS en su partición raíz,\n"
-"la creaciĂłn de un disquete de arranque en un disquete de 1.44Mb puede "
-"fallar\n"
-"porque XFS necesita un controlador muy grande)."
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
msgstr ""
-"Un disquete de arranque personalizado da la posibilidad de arrancar su "
-"equipo\n"
-"bajo Linux sin depender del cargador de arranque normal. Esto puede ser "
-"Ăștil\n"
-"si no desea instalar SILO en su sistema, o si cualquier otro sistema "
-"operativo borra\n"
-"SILO, o si SILO no funciona con su configuraciĂłn de hardware. Un disquete\n"
-"de arranque personalizado también se puede usar con la imagen de rescate de\n"
-" Mandrake haciendo asĂ­ mucho mĂĄs fĂĄcil la recuperaciĂłn en caso de fallo\n"
-"grave del sistema.\n"
+"Argumentos: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"Si desea crear un disquete de arranque para su sistema, inserte un disquete\n"
-"en la primer disquetera y presione \"Aceptar\"."
+"Habilitar/deshabilitar reportes de syslog en consola 12. \\fIexpr\\fP es la\n"
+"expresiĂłn que describe que registrar (vea syslog.conf(5) para mĂĄs detalles) "
+"y\n"
+"dev el dispositivo donde reportar el registro."
-#: ../../bootloader.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "No puede instalar el cargador de arranque en una particiĂłn %s\n"
+msgid "comma separated strings"
+msgstr "cadenas de caracteres separadas por comas"
-#: ../../bootloader.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "not enough room in /boot"
-msgstr "no hay espacio suficiente en /boot"
+msgid "These are the machines from which the scanners should be used:"
+msgstr ""
+"Estas son las mĂĄquinas desde las cuales deberĂ­an utilizarse los escĂĄneres:"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Se va a iniciar la entrada resaltada en %d segundos."
+msgid "Messages"
+msgstr "Mensajes"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "los comandos antes de iniciar, o pulse 'c' para una linea de comandos."
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr "Desconocido|CPH06X (bt878) [muchos fabricantes]"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Pulse intro para iniciar el SO elegido, pulse 'e' para editar"
+msgid "POP and IMAP Server"
+msgstr "Servidor POP e IMAP"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use las teclas %c y %c para seleccionar una entrada."
+msgid "Mexico"
+msgstr "MĂ©xico"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "ÂĄBienvenido a GRUB, el selector de SO de arranque!"
+msgid "Model stepping"
+msgstr "Paso del modelo"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Rwanda"
+msgstr "Ruanda"
-#: ../../bootloader.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Grub"
-msgstr "Grub"
+msgid "Do you have any %s interfaces?"
+msgstr "ÂżTiene alguna interfaz %s?"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with text menu"
-msgstr "LILO con menĂș de texto"
+msgid "Switzerland"
+msgstr "Suiza"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO con menĂș grĂĄfico"
+msgid "Brunei Darussalam"
+msgstr "Brunei Darussalam"
-#: ../../bootloader.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Remote lpd Printer Options"
+msgstr "Opciones de la impresora remota lpd"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
"\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
msgstr ""
-"ÂĄBienvenido a %s, el selector de SO de arranque!\n"
+"GNU/Linux es un sistema multiusuario, y esto significa que cada usuario\n"
+"puede tener sus preferencias propias, sus archivos propios, y asĂ­\n"
+"sucesivamente. Puede leer la \"GuĂ­a de Comienzo\" para aprender mĂĄs. Pero,\n"
+"a diferencia de \"root\", que es el administrador del sistema, los usuarios\n"
+"que agregue en este punto no estarĂĄn autorizados a cambiar nada excepto su\n"
+"configuraciĂłn y sus archivos propios, protegiendo al sistema contra cambios\n"
+"no intencionales o maliciosos que pueden impactar al sistema como un todo.\n"
+"TendrĂĄ que crear al menos un usuario no privilegiado para Usted mismo - esa\n"
+"cuenta es la que deberĂ­a utilizar para el uso rutinario diario. Aunque es\n"
+"muy prĂĄctico ingresar como \"root\" para hacer cualquier cosa y de todo,\n"
+"¥también puede ser muy peligroso! Un error podría significar que su sistema\n"
+"deje de funcionar. Si comete un error serio como usuario no privilegiado,\n"
+"sĂłlo puede llegar a perder algo de informaciĂłn, pero no afectar a todo el\n"
+"sistema.\n"
"\n"
-"Elija un sistema operativo de la lista o espere %d segundos\n"
-"para que arranque el sistema predeterminado.\n"
+"El primer campo le pide un nombre real. Por supuesto, esto no es\n"
+"obligatorio - en realidad, puede ingresar lo que desee. DrakX usarĂĄ la\n"
+"primer palabra que ingresĂł y la copiarĂĄ al campo \"%s\", que es el nombre\n"
+"que este usuario en particular usarĂĄ para ingresar al sistema. Si lo desea,\n"
+"puede omitir lo predeterminado y cambiar el nombre de usuario. El prĂłximo\n"
+"paso es ingresar una contraseña. La contraseña de un usuario no\n"
+"privilegiado (regular) no es tan crucial como la de \"root\" desde el punto\n"
+"de vista de la seguridad, pero esto no es razĂłn alguna para obviarla o\n"
+"hacerla muy simple: después de todo, son sus archivos los que podrían estar\n"
+"en peligro.\n"
+"\n"
+"Una vez que hace clic sobre \"%s\", puede agregar otros usuarios. Agregue\n"
+"un usuario para cada uno de sus amigos: por ejemplo su padre o su hermana.\n"
+"Haga clic sobre \"%s\" cuando haya terminado de agregar todos los usuarios\n"
+"que desee.\n"
+"\n"
+"Hacer clic sobre el botĂłn \"%s\" le permite cambiar el \"shell\"\n"
+"predeterminado para ese usuario (bash, por defecto)\n"
"\n"
+"Cuando haya finalizado de añadir todos los usuarios se le propone elegir un\n"
+"usuario para conectarse automĂĄticamente en el sistema cuando arranca la\n"
+"computadora. Si estĂĄ interesado en esta caracterĂ­stica (y no le importa\n"
+"mucho la seguridad local), elija el usuario y administrador de ventanas\n"
+"deseado. Si no estĂĄ interesado en esta caracterĂ­stica, quite la marca de la\n"
+"casilla \"%s\". Haga clic sobre \"%s\" una vez que seleccionĂł su\n"
+"preferencia."
-#: ../../common.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "consolehelper missing"
-msgstr "falta \"consolehelper\""
+msgid "Configure Internet Access..."
+msgstr "Configurar el acceso a Internet..."
-#: ../../common.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "kdesu missing"
-msgstr "no se encuentra kdesu"
+msgid "Norway"
+msgstr "Noruega"
-#: ../../common.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Screenshots will be available after install in %s"
+msgid "Danish"
+msgstr "Danés"
+
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
msgstr ""
-"Luego de la instalaciĂłn estarĂĄn disponibles las instantĂĄneas de pantalla en %"
-"s"
+"Activar el bloqueo numérico automåticamente bajo la consola y\n"
+"XFree al arrancar."
-#: ../../common.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "No se pueden realizar instantĂĄneas de pantalla antes del particionado"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+"Por favor, introduzca la direcciĂłn IP de esta mĂĄquina.\n"
+"Cada valor tiene que introducirse como una direcciĂłn IP en notaciĂłn\n"
+"decimal con puntos (por ejemplo: 1.2.3.4)."
-#: ../../common.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "%d seconds"
-msgstr "%d segundos"
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
+msgstr ""
+"La instalaciĂłn de Mandrake Linux se divide en varios CD-ROM. DrakX sabe si\n"
+"un paquete seleccionado se encuentra en otro CD por lo que expulsarĂĄ el CD\n"
+"corriente y le pedirĂĄ que inserte el CD correcto cuando sea necesario."
-#: ../../common.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "1 minute"
-msgstr "1 minuto"
+msgid "Processors"
+msgstr "Procesadores"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "%d minutes"
-msgstr "%d minutos"
+msgid "Bulgaria"
+msgstr "Bulgaria"
-#: ../../common.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "TB"
-msgstr "TB"
+msgid "No NIC selected!"
+msgstr "ÂĄNo se seleccionĂł NIC!"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "GB"
-msgstr "GB"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr "Islas Svalbard e Islas Jan Mayen"
-#: ../../common.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "MB"
-msgstr "MB"
+msgid ""
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
+msgstr ""
+"Ocurrieron problemas durante la configuraciĂłn.\n"
+"Verifique su conexiĂłn con net_monitor o mcc. Si su conexiĂłn no funciona, "
+"puede que desee volver a iniciar la configuraciĂłn"
-#: ../../common.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "KB"
-msgstr "KB"
+msgid "partition %s is now known as %s"
+msgstr "la particiĂłn %s ahora se conoce como %s"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "United States"
-msgstr "Estados Unidos"
+msgid "Backup Other files..."
+msgstr "Respaldar otros archivos..."
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Austria"
-msgstr "Austria"
+msgid "SMB server IP"
+msgstr "IP del servidor SMB"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Italy"
-msgstr "Italia"
+msgid "Congo (Kinshasa)"
+msgstr "Congo (Kinshasa)"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Netherlands"
-msgstr "Holanda"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "ÂĄSe escribirĂĄ al disco la tabla de particiones de la unidad %s!"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sweden"
-msgstr "Suecia"
+msgid "Installing HPOJ package..."
+msgstr "Instalando paquete HPOJ..."
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Norway"
-msgstr "Noruega"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr ""
+"Un disquete de arranque personalizado da la posibilidad de arrancar su "
+"equipo\n"
+"bajo Linux sin depender del cargador de arranque normal. Esto puede ser "
+"Ăștil\n"
+"si no desea instalar LILO (o grub) en su sistema, o si cualquier otro "
+"sistema operativo borra\n"
+"LILO, o si LILO no funciona con su configuraciĂłn de hardware. Un disquete\n"
+"de arranque personalizado también se puede usar con la imagen de rescate de\n"
+"Mandrake haciendo asĂ­ mucho mĂĄs fĂĄcil la recuperaciĂłn en caso de fallo\n"
+"grave del sistema. ÂżDesea crear un disquete de arranque para su sistema?\n"
+"%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Greece"
-msgstr "Grecia"
+msgid ", USB printer \\#%s"
+msgstr ", impresora USB \\#%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Germany"
-msgstr "Alemania"
+msgid "Latvian"
+msgstr "LetĂłn"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Czech Republic"
-msgstr "RepĂșblica Checa"
+msgid "monthly"
+msgstr "cada mes"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Belgium"
-msgstr "BĂ©lgica"
+msgid "Module name"
+msgstr "Nombre del mĂłdulo"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "France"
-msgstr "Francia"
+msgid "Start at boot"
+msgstr "Iniciar al arrancar"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental Backups"
+msgstr "Usar respaldos incrementales (no reemplazar respaldos antiguos)"
+
+#: ../../any.pm:1
#, c-format
-msgid "Costa Rica"
-msgstr "Costa Rica"
+msgid "First sector of drive (MBR)"
+msgstr "Primer sector del disco (MBR)"
-#: ../../fsedit.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Error al abrir %s para escribir: %s"
+msgid "Joystick"
+msgstr "Joystick"
-#: ../../fsedit.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Nothing to do"
-msgstr "Nada para hacer"
+msgid "El Salvador"
+msgstr "El Salvador"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "No hay espacio libre suficiente para la asignaciĂłn automĂĄtica"
+msgid "Use Unicode by default"
+msgstr "Usar Unicode predeterminadamente"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-"No puede usar un sistema de archivos cifrado para el punto de montaje %s"
+msgid "the module of the GNU/Linux kernel that handles the device"
+msgstr "el mĂłdulo del nĂșcleo GNU/Linux que maneja ese dispositivo"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Trying to rescue partition table"
+msgstr "Tratando de rescatar la tabla de particiones"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s must be an integer number!"
+msgstr "ÂĄLa opciĂłn %s debe ser un nĂșmero entero!"
+
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
+"Entries you'll have to fill:\n"
+"%s"
msgstr ""
-"Necesita un sistema de archivos verdadero (ext2/ext3, reiserfs, xfs o jfs) "
-"para este punto de montaje\n"
+"Entradas que tendrĂĄ que rellenar:\n"
+"%s"
-#: ../../fsedit.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Este directorio deberĂ­a permanecer dentro del sistema de archivos raĂ­z"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "ÂĄÂĄÂĄ No se puede iniciar la actualizaciĂłn en vivo !!!\n"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "No puede usar un Volumen LĂłgico LVM para el punto de montaje %s"
+msgid "Name: "
+msgstr "Nombre: "
-#: ../../fsedit.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"EligiĂł una particiĂłn RAID en software como particiĂłn raĂ­z (/).\n"
-"NingĂșn cargador de arranque es capaz de manejar esto sin una particiĂłn /"
-"boot.\n"
-"Por favor, asegĂșrese de añadir una particiĂłn /boot."
+msgid "16 million colors (24 bits)"
+msgstr "16 millones de colores (24 bits)"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Ya existe una particiĂłn con el punto de montaje %s\n"
+msgid "Allow all users"
+msgstr "Permitir a todos los usuarios"
-#: ../../fsedit.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "Los puntos de montaje deberían contener sólo caracteres alfanuméricos"
+msgid "The official MandrakeSoft Store"
+msgstr "La tienda oficial de MandrakeSoft"
-#: ../../fsedit.pm:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Los puntos de montaje deben comenzar con una /"
+msgid "Resizing"
+msgstr "Redimensionando"
-#: ../../fsedit.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "No se puede usar ReiserFS para particiones menores de 32MB"
+msgid "Cable connection"
+msgstr "ConexiĂłn por cable"
-#: ../../fsedit.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "No se puede usar JFS para particiones menores de 32MB"
+msgid "User"
+msgstr "Usuario"
#: ../../fsedit.pm:1
#, c-format
@@ -996,1378 +1958,258 @@ msgstr ""
"\n"
"ÂżEstĂĄ de acuerdo en perder todas las particiones?\n"
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Error"
-msgstr "Error"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr ""
+"Realizar respaldo nuevo antes de restaurar (sĂłlo para respaldos "
+"incrementales)"
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "server"
-msgstr "servidor"
+msgid "Printer on parallel port \\#%s"
+msgstr "Impresora en puerto paralelo \\#%s"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "with /usr"
-msgstr "con /usr"
+msgid "Name"
+msgstr "Nombre"
-#: ../../fsedit.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "simple"
-msgstr "simple"
+msgid "mkraid failed"
+msgstr "FallĂł mkraid"
-#: ../../fs.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Enabling swap partition %s"
-msgstr "Habilitando la particiĂłn swap %s"
+msgid "Button 3 Emulation"
+msgstr "EmulaciĂłn del botĂłn 3"
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "error unmounting %s: %s"
-msgstr "error desmontando %s: %s"
+msgid "Sending files..."
+msgstr "Enviando archivos..."
-#: ../../fs.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "fallĂł el montaje de la particiĂłn %s en el directorio %s"
+msgid "Israeli (Phonetic)"
+msgstr "Israelí (fonético)"
-#: ../../fs.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mounting partition %s"
-msgstr "Montando la particiĂłn %s"
+msgid "access to rpm tools"
+msgstr "acceso a herramientas rpm"
-#: ../../fs.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Checking %s"
-msgstr "Verificando %s"
+msgid "edit"
+msgstr "editar"
-#: ../../fs.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Formatting partition %s"
-msgstr "Formateando la particiĂłn %s"
+msgid "You must choose/enter a printer/device!"
+msgstr "ÂĄDebe elegir/ingresar una impresora o un dispositivo!"
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Creando y formateando el archivo %s"
+msgid "Permission problem accessing CD."
+msgstr "Problema de permisos al acceder al CD."
-#: ../../fs.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "No sé cómo formatear %s en el tipo %s"
+msgid "Phone number"
+msgstr "NĂșmero de telĂ©fono"
-#: ../../fs.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formateo de %s fallĂł"
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr "Error: el controlador \"%s\" para su tarjeta de sonido no estĂĄ listado"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Haga clic sobre \"Siguiente ->\" si desea borrar todos los datos y\n"
-"particiones presentes en esta unidad de disco. Tenga cuidado, luego de\n"
-"hacer clic sobre \"Siguiente ->\", no podrĂĄ recuperar los datos y las\n"
-"particiones presentes en esta unidad de disco, incluyendo los datos de\n"
-"Windows.\n"
-"\n"
-"Haga clic sobre \"<- Anterior\" para detener esta operaciĂłn sin perder los\n"
-"datos ni las particiones presentes en esta unidad de disco."
+msgid "Printer name, description, location"
+msgstr "Nombre de la impresora, descripciĂłn, ubicaciĂłn"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Elija la unidad de disco que desea borrar para instalar su particiĂłn\n"
-"Mandrake Linux nueva. Tenga cuidado, ÂĄse perderĂĄn todos los datos de la\n"
-"misma y no se podrĂĄn recuperar!."
+msgid "USA (broadcast)"
+msgstr "EEUU (difusiĂłn)"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
+"Please choose the\n"
+"media for backup."
msgstr ""
-"A manera de revisiĂłn, DrakX presentarĂĄ un resumen de las distintas\n"
-"informaciones que tiene acerca de su sistema. Dependiendo del hardware\n"
-"instalado, puede tener algunas o todas las entradas siguientes. Cada\n"
-"entrada estĂĄ compuesta de el elemento de configuraciĂłn a configurar,\n"
-"seguido de un pequeño resumen de la configuración corriente. Haga clic\n"
-"sobre el botĂłn \"Configurar\" correspondiente para cambiar eso.\n"
-"\n"
-" * \"Teclado\": verifique la configuraciĂłn de la disposiciĂłn corriente del\n"
-"teclado y cĂĄmbiela si es necesario.\n"
-"\n"
-" * \"PaĂ­s\": verifique la selecciĂłn corriente del paĂ­s. Si Usted no se\n"
-"encuentra en este paĂ­s, haga clic sobre el botĂłn \"Configurar\" y elija\n"
-"otro. Si su paĂ­s no se muestra en la primer lista, haga clic sobre el botĂłn\n"
-"\"MĂĄs\" para obtener la lista completa de paĂ­ses.\n"
-"\n"
-" * \"Huso horario\": De manera predeterminada, DrakX deduce su huso horario\n"
-"basĂĄndose en el paĂ­s que ha elegido. Puede hacer clic sobre el botĂłn\n"
-"\"Configurar\" si esto no es correcto.\n"
-"\n"
-" * \"RatĂłn\": verifique la configuraciĂłn del ratĂłn y haga clic sobre el\n"
-"botĂłn para cambiarla, si es necesario.\n"
-"\n"
-" * \"Impresora\": al hacer clic sobre el botĂłn \"Configurar\" se abrirĂĄ el\n"
-"asistente de configuraciĂłn de la impresora. Consulte el capĂ­tulo\n"
-"correspondiente de la \"GuĂ­a de Comienzo\" para mĂĄs informaciĂłn sobre cĂłmo\n"
-"configurar una impresora nueva. La interfaz presentada allĂ­ es similar a la\n"
-"utilizada durante la instalaciĂłn.\n"
-"\n"
-" * \"Tarjeta de sonido\": si se detecta una tarjeta de sonido en su\n"
-"sistema, la misma se muestra aquĂ­. Si nota que la tarjeta de sonido\n"
-"mostrada no es la que estĂĄ realmente instalada en su sistema, puede hacer\n"
-"clic sobre el botĂłn y elegir otro controlador.\n"
-"\n"
-" * \"Interfaz grĂĄfica\": de manera predeterminada, DrakX configura su\n"
-"interfaz grĂĄfica en \"800x600\" o \"1024x768\" de resoluciĂłn. Si eso no le\n"
-"satisface, haga clic sobre \"Configurar\" para volver a configurar su\n"
-"interfaz grĂĄfica.\n"
-"\n"
-" * \"Tarjeta de TV\": si se detecta una tarjeta de TV en su sistema, la\n"
-"misma se muestra aquĂ­. Si tiene una tarjeta de TV y la misma no se detecta,\n"
-"haga clic sobre \"Configurar\" para intentar configurarla a mano.\n"
-"\n"
-" * \"Tarjeta RDSI\": si se detecta una tarjeta RDSI en su sistema, la misma\n"
-"se muestra aquĂ­. Puede hacer clic sobre \"Configurar\" para cambiar los\n"
-"parĂĄmetros asociados a la misma.\n"
-"\n"
-" * \"Red\": se desea configurar ahora el acceso a la Internet o su red\n"
-"local.\n"
-"\n"
-" * \"Nivel de seguridad\": esta entrada le ofrece volver a definir el nivel\n"
-"de seguridad como se ajustĂł en un paso previo ()\n"
-"\n"
-" * \"Cortafuegos\": si planifica conectar su mĂĄquina a la Internet, es una\n"
-"buena idea protegerse de las intrusiones configurando un cortafuegos.\n"
-"Consulte la secciĂłn correspondiente de la \"GuĂ­a de Comienzo\" para\n"
-"detalles acerca de los ajustes del cortafuegos.\n"
-"\n"
-" * \"Cargador de arranque\": si desea cambiar la configuraciĂłn de su\n"
-"cargador de arranque, haga clic sobre ese botĂłn. Esto deberĂ­a estar\n"
-"reservado para usuarios avanzados.\n"
-"\n"
-" * \"Servicios\": aquí podrå tener un control fino sobre qué servicios\n"
-"correrĂĄn en su mĂĄquina. Si planifica utilizar esta mĂĄquina como servidor es\n"
-"una buena idea revisar estos ajustes."
+"Por favor, elija el soporte\n"
+"para la copia de respaldo."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
-msgstr ""
-"\"Tarjeta de sonido\": si se detecta una tarjeta de sonido en su sistema,\n"
-"la misma se muestra aquĂ­. Si nota que la tarjeta de sonido mostrada no es\n"
-"la que estĂĄ realmente instalada en su sistema, puede hacer clic sobre el\n"
-"botĂłn y elegir otro controlador."
+msgid "Use Xinerama extension"
+msgstr "Usar extensiĂłn Xinerama"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot es un cargador de arranque para el hardware NewWorld MacIntosh. El\n"
-"mismo puede arrancar o GNU/Linux, o MacOS o MacOSX si se encuentran en su\n"
-"computadora. Normalmente, estos sistemas operativos se detectan e instalan\n"
-"correctamente. Si este no es el caso, puede agregar una entrada a mano en\n"
-"esta pantalla. Tenga cuidado de elegir los parĂĄmetros correctos.\n"
-"\n"
-"Las opciones principales de Yaboot son:\n"
-"\n"
-" * Mensaje de Init: un mensaje de texto simple que se muestra antes del\n"
-"prompt de arranque.\n"
-"\n"
-" * Dispositivo de arranque: indica donde desea colocar la informaciĂłn\n"
-"necesaria para arrancar en GNU/Linux. Generalmente, se configura una\n"
-"particiĂłn bootstrap con anterioridad para contener esta informaciĂłn.\n"
-"\n"
-" * Demora de Open Firmware: a diferencia de LILO, hay dos demoras\n"
-"disponibles con Yaboot. La primera se mide en segundos y aquĂ­ puede elegir\n"
-"entre CD, arranque OF, MacOS o Linux.\n"
-"\n"
-" * Demora de arranque del nĂșcleo: esta demora es similar a la demora de\n"
-"arranque de LILO. Luego de seleccionar Linux, tendrå esta demora en décimas\n"
-"de segundo antes que se seleccione su descripciĂłn del nĂșcleo\n"
-"predeterminada.\n"
-"\n"
-" * ÂżHabilitar arranque desde el CD?: marcando esta opciĂłn Usted puede\n"
-"elegir \"C\" para el CD en el primer prompt de arranque.\n"
-"\n"
-" * ÂżHabilitar arranque OF?: marcando esta opciĂłn Usted puede elegir \"N\"\n"
-"para Open Firmware en el primer prompt de arranque.\n"
-"\n"
-" * SO predeterminado: puede seleccionar qué sistema operativo arrancarå por\n"
-"defecto cuando expira la demora de Open Firmware."
+msgid "Loopback"
+msgstr "Loopback"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
msgstr ""
-"Puede agregar entradas adicionales para Yaboot, ya sea para otros sistemas\n"
-"operativos, nĂșcleos alternativos, o para una imagen de arranque de\n"
-"emergencia.\n"
-"\n"
-"Para otros sistemas operativos, la entrada consiste sĂłlo de una etiqueta y\n"
-"la particiĂłn raĂ­z.\n"
-"\n"
-"Para Linux, hay algunas opciones posibles:\n"
-"\n"
-" * Etiqueta: esta es simplemente el nombre que deberĂĄ teclear en el prompt\n"
-"de yaboot para seleccionar esta opciĂłn de arranque.\n"
-"\n"
-" * Imagen: esta deberĂ­a ser el nombre del nĂșcleo a arrancar. TĂ­picamente,\n"
-"vmlinux o una variaciĂłn de vmlinux con una extensiĂłn.\n"
-"\n"
-" * RaĂ­z: el dispositivo \"root\" o \"/\" para su instalaciĂłn Linux.\n"
-"\n"
-" * Añadir: la opciĂłn de añadir al nĂșcleo se usa bastante sobre el hardware\n"
-"Apple para asistir en la inicializaciĂłn del hardware de vĂ­deo, o para\n"
-"habilitar la emulaciĂłn de los botones del ratĂłn con el teclado para los\n"
-"botones 2do y 3ro del ratĂłn que por lo general no tienen los ratones\n"
-"estĂĄndar de Apple. Algunos ejemplos son los siguientes:\n"
-"\n"
-" \tvideo=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" \tvideo=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: esta opciĂłn se puede usar o bien para cargar los mĂłdulos\n"
-"iniciales, antes que esté disponible el dispositivo de arranque, o bien\n"
-"cargar una imagen de ramdisk para una situaciĂłn de arranque de emergencia.\n"
-"\n"
-" * Tamaño de Initrd: generalmente el tamaño por defecto del ramdisk es 4096\n"
-"bytes. Puede usar esta opciĂłn si necesita asignar un ramdisk mayor.\n"
-"\n"
-" * Lectura-Escritura: normalmente la particiĂłn \"root\" se levanta en modo\n"
-"de sĂłlo lectura, para permitir una verificaciĂłn del sistema de archivos\n"
-"antes que el sistema se levante por completo. AquĂ­ puede cambiar esta\n"
-"opciĂłn.\n"
-"\n"
-" * Sin vĂ­deol: en caso que el hardware de vĂ­deo de Apple sea "
-"excepcionalmente\n"
-"problemĂĄtico, puede seleccionar esta opciĂłn para arrancar en el modo\n"
-"\"novideo\", con soporte nativo para el frame-buffer.\n"
-"\n"
-" * Predeterminada: selecciona a esta entrada como la opciĂłn Linux por\n"
-"defecto, que se puede elegir simplemente presionando [Intro] en el prompt\n"
-"de Yaboot. Esta entrada también se marcarå con un \"*\", si presiona [Tab]\n"
-"para ver las selecciones del arranque."
+"No se puede cerrar mkbootdisk adecuadamente: \n"
+" %s \n"
+" %s"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"DrakX primero detectarĂĄ cualquier dispositivo IDE presente en su\n"
-"computadora. También buscarå una o mås tarjetas SCSI PCI en su sistema. Si\n"
-"se encuentra una tarjeta SCSI, DrakX instalarĂĄ el controlador apropiado\n"
-"automĂĄticamente.\n"
-"\n"
-"Debido a que la detecciĂłn de hardware a veces puede no detectar alguna\n"
-"pieza de hardware, DrakX puede fallar al detectar sus discos rĂ­gidos. De\n"
-"ser asĂ­, tendrĂĄ que especificar su hardware a mano.\n"
-"\n"
-"Si tiene que seleccionar su adaptador SCSI PCI manualmente, DrakX le\n"
-"preguntarĂĄ si desea especificar opciones para el mismo. DeberĂ­a permitir\n"
-"que DrakX sondee el hardware buscando las opciones especĂ­ficas necesarias\n"
-"para inicializar el adaptador. La mayorĂ­a de las veces, DrakX pasarĂĄ esta\n"
-"etapa sin problema alguno.\n"
-"\n"
-"Si DrakX no puede sondear las opciones para determinar automåticamente qué\n"
-"parĂĄmetros deben pasarse, necesitarĂĄ configurar manualmente el controlador."
+msgid "West Europe"
+msgstr "Europa del oeste"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
msgstr ""
-"Ahora, es tiempo de seleccionar un sistema de impresiĂłn para su\n"
-"computadora. Otros sistemas operativos pueden ofrecerle uno, pero Mandrake\n"
-"Linux le ofrece dos. Cada uno de los sistemas de impresiĂłn es mejor para un\n"
-"tipo de configuraciĂłn particular.\n"
-"\n"
-" * \"pdq\" - \"print, don't queue\" (imprimir sin poner en cola), es la\n"
-"elecciĂłn si Usted tiene una conexiĂłn directa a su impresora y desea evitar\n"
-"el pĂĄnico de los papeles trabados, y no tiene impresora en red alguna\n"
-"(\"pdq\" manejarĂĄ sĂłlo casos de red muy simples y es algo lento cuando se\n"
-"utiliza con las redes) Se recomienda utilizar \"pdq\" si esta es su primer\n"
-"experiencia con GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - \"Common Unix Printing System\" (Sistema de ImpresiĂłn ComĂșn\n"
-"de Unix) es una elecciĂłn excelente para imprimir en su impresora local o en\n"
-"una en la otra punta del planeta. Es simple de configurar y puede actuar\n"
-"como servidor o cliente para el sistema de impresiĂłn antiguo \"lpd\", por\n"
-"lo que es compatible con sistemas operativos mĂĄs antiguos que todavĂ­a\n"
-"pueden necesitar servicios de impresiĂłn. Si bien es bastante potente, la\n"
-"configuraciĂłn bĂĄsica es tan simple como la de \"pdq\". Si necesita que\n"
-"emule a un servidor \"lpd\", debe encender el demonio \"cups-lpd\".\n"
-"\"CUPS\" incluye interfaces grĂĄficas para imprimir o elegir las opciones de\n"
-"la impresora y para administrar la impresora.\n"
+"[OPCIONES] [NOMBRE_PROGRAMA]\n"
"\n"
-"Si hace una elecciĂłn ahora, y mĂĄs tarde encuentra que a Usted no le gusta\n"
-"su sistema de impresiĂłn, lo puede cambiar ejecutando PrinterDrake desde el\n"
-"Centro de Control de Mandrake y haciendo clic sobre el botĂłn para expertos."
+"OPCIONES:\n"
+" --help - imprime este mensaje.\n"
+" --report - programa deberĂ­a ser una herramienta mandrake\n"
+" --incident - programa deberĂ­a ser una herramienta mandrake"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
-msgstr ""
-"LILO y grub son cargadores de arranque para GNU/Linux. Normalmente, esta\n"
-"etapa estĂĄ completamente automatizada. DrakX analizarĂĄ el sector de\n"
-"arranque del disco y actuarĂĄ en funciĂłn de lo que encuentre allĂ­:\n"
-"\n"
-" * si encuentra un sector de arranque de Windows, lo reemplazarĂĄ con un\n"
-"sector de arranque de grub/LILO de forma tal que Usted pueda cargar\n"
-"GNU/Linux u otro sistema operativo;\n"
-"\n"
-" * si encuentra un sector de arranque de grub o LILO, lo reemplazarĂĄ con\n"
-"uno nuevo;\n"
-"\n"
-"Si no puede realizar una determinaciĂłn, DrakX le pedirĂĄ dĂłnde colocar el\n"
-"cargador de arranque.\n"
-"\n"
-"\"Dispositivo de arranque\": en la mayorĂ­a de los casos, Usted no cambiarĂĄ\n"
-"lo predeterminado (\"Primer sector del disco (MBR)\"), pero si prefiere, el\n"
-"cargador de arranque se puede instalar en el segundo disco rĂ­gido\n"
-"(\"/dev/hdb\"), o incluso en un disquete (\"En disquete\")"
+msgid "Harddrake2 version %s"
+msgstr "Harddrake2 versiĂłn %s"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-"Luego que haya configurado los parĂĄmetros generales del cargador de\n"
-"arranque se mostrarĂĄ la lista de opciones de arranque que estarĂĄn\n"
-"disponibles al momento de arrancar.\n"
-"\n"
-"Si hay otros sistemas operativos instalados en su mĂĄquina los mismos se\n"
-"agregarĂĄn automĂĄticamente al menĂș de arranque. AquĂ­ puede elegir ajustar\n"
-"las opciones existentes haciendo clic sobre \"Añadir\" para crear una nueva\n"
-"entrada; seleccionando una entrada y haciendo clic sobre \"Modificar\" o\n"
-"\"Quitar\" para modificarla o quitarla. \"Aceptar\" valida sus cambios.\n"
-"\n"
-"También, puede ser que no desee dar acceso a los otros sistemas operativos\n"
-"a cualquiera que vaya a la consola y reinicie la mĂĄquina. Puede borrar las\n"
-"entradas correspondientes para los sistemas operativos para quitarlas del\n"
-"menĂș, pero ÂĄnecesitarĂĄ un disquete de arranque para poder arrancar esos\n"
-"otros sistemas operativos!"
+msgid "Copying %s"
+msgstr "Copiando %s"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
-msgstr ""
-"Este diĂĄlogo le permite un ajuste fino de su cargador de arranque:\n"
-"\n"
-" * \"Cargador de arranque a usar\": hay tres opciones para su cargador de\n"
-"arranque:\n"
-"\n"
-" * \"GRUB\": si prefiere a grub (menĂș de texto).\n"
-"\n"
-" * \"LILO con menĂș de texto\": si prefiere a LILO con su interfaz de\n"
-"texto.\n"
-"\n"
-" * \"LILO con menĂș grĂĄfico\": si prefiere a LILO con su interfaz\n"
-"grĂĄfica.\n"
-"\n"
-" * \"Dispositivo de arranque\": en la mayorĂ­a de los casos, no cambiarĂĄ lo\n"
-"predeterminado (\"/dev/hda\"), pero si lo prefiere, el cargador de arranque\n"
-"se puede instalar en el segundo disco rĂ­gido (\"/dev/hdb\"), o incluso en\n"
-"un disquete (\"/dev/fd0\").\n"
-"\n"
-" * \"Demora antes de arrancar la imagen predeterminada\": luego de arrancar\n"
-"o volver a arrancar la computadora, esta es la demora que se garantiza al\n"
-"usuario para elegir, en el menĂș del cargador de arranque, una entrada\n"
-"distinta a la predeterminada.\n"
-"\n"
-"!! Tenga presente que si no elige instalar un cargador de arranque\n"
-"(seleccionando \"Omitir\"), ÂĄdebe asegurarse que tiene una forma de\n"
-"arrancar a su sistema Mandrake Linux! También debe asegurarse que sabe lo\n"
-"que hace antes de cambiar cualquier opciĂłn. !!\n"
-"\n"
-"Haciendo clic sobre el botĂłn \"Avanzadas\" en este diĂĄlogo se le ofrecerĂĄn\n"
-"opciones avanzadas que estĂĄn reservadas para el usuario experto."
+msgid "Choose color"
+msgstr "elija color"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
-msgstr ""
-"Este es el punto de decisiĂłn mĂĄs crucial para la seguridad de su sistema\n"
-"GNU/Linux: tendrå que ingresar la contraseña de \"root\". El usuario\n"
-"\"root\" es el administrador del sistema y es el Ășnico autorizado a hacer\n"
-"actualizaciones, agregar usuarios, cambiar la configuraciĂłn general del\n"
-"sistema, etc. Resumiendo, ÂĄ\"root\" puede hacer de todo!. Es por esto que\n"
-"deberå elegir una contraseña que sea difícil de adivinar - DrakX le dirå si\n"
-"la que eligiĂł es demasiado fĂĄcil. Como puede ver, no es forzoso ingresar\n"
-"una contraseña, pero le recomendamos encarecidamente que ingrese una.\n"
-"GNU/Linux es tan propenso a errores del operador como cualquier otro\n"
-"sistema operativo. Debido a que \"root\" puede sobrepasar todas las\n"
-"limitaciones y borrar, sin intenciĂłn, todos los datos que se encuentran en\n"
-"las particiones accediendo a las mismas sin el cuidado suficiente, es que\n"
-"es importante que sea difĂ­cil convertirse en \"root\".\n"
-"\n"
-"La contraseña debería ser una mezcla de caracteres alfanuméricos y tener al\n"
-"menos una longitud de 8 caracteres. Nunca escriba la contraseña de \"root\"\n"
-"- en un papel, eso hace que sea muy fĂĄcil comprometer a un sistema.\n"
-"\n"
-"Sin embargo, no debería hacer la contraseña muy larga o complicada ¥debido\n"
-"a que Usted debe poder recordarla!\n"
-"\n"
-"La contraseña no se mostrarå en la pantalla a medida que Usted la teclee.\n"
-"Por lo tanto, tendrå que teclear la contraseña dos veces para reducir la\n"
-"posibilidad de un error de tecleo. Si ocurre que Usted comete dos veces el\n"
-"mismo error de tecleo, tendrå que utilizar esta contraseña \"incorrecta\"\n"
-"la primera vez que se conecte.\n"
-"\n"
-"Si desea que el acceso a esta computadora esté controlado por un servidor\n"
-"de autenticaciĂłn, haga clic sobre el botĂłn \"Avanzadas\".\n"
-"\n"
-"Si su red usa los protocolos LDAP, NIS, o servicios de autenticaciĂłn de PDC\n"
-"Dominio de Windows, seleccione el botĂłn apropiado como \"autenticaciĂłn\".\n"
-"Si no sabe cual utilizar, pregunte al administrador de su red.\n"
-"\n"
-"Si ocurre que tiene problemas para recordar contraseñas, puede elegir el\n"
-"botón \"Sin contraseña\", si es que su computadora no estarå conectada a la\n"
-"Internet y Usted confĂ­a en cualquier persona que tenga acceso a la misma."
+msgid "Dominican Republic"
+msgstr "RepĂșblica Dominicana"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Por favor seleccione el puerto correcto. Por ejemplo, el puerto \"COM1\"\n"
-"bajo Windows se denomina \"ttyS0\" bajo GNU/Linux."
+msgid "Swaziland"
+msgstr "Swazilandia"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
-msgstr ""
-"Por lo general, DrakX no tiene problemas en detectar la cantidad de botones\n"
-"que tiene su ratĂłn. En caso contrario, asume que Usted tiene un ratĂłn de\n"
-"dos botones y lo configurarĂĄ para que emule el tercer botĂłn. El tercer\n"
-"botĂłn del ratĂłn de un ratĂłn de dos botones se puede \"presionar\" haciendo\n"
-"clic simultĂĄneamente sobre el botĂłn izquierdo y el derecho. DrakX sabrĂĄ\n"
-"automĂĄticamente si su ratĂłn utiliza una interfaz PS/2, serie o USB.\n"
-"\n"
-"Si, por alguna razĂłn, desea especificar un tipo de ratĂłn diferente,\n"
-"selecciĂłnelo de la lista que se proporciona.\n"
-"\n"
-"Si elige un ratĂłn distinto al predeterminado, se le presentarĂĄ una pantalla\n"
-"de prueba. Use los botones y la rueda para verificar que la configuraciĂłn\n"
-"es correcta y que el ratĂłn estĂĄ funcionando correctamente. Si el ratĂłn no\n"
-"estĂĄ funcionando bien, presione la barra espaciadora o [Intro] para\n"
-"cancelar la prueba y volver a la lista de opciones.\n"
-"\n"
-"Los ratones con rueda a veces no se detectan automĂĄticamente, por lo que\n"
-"deberĂĄ seleccionar su ratĂłn de una lista. Debe asegurarse de seleccionar el\n"
-"correspondiente al puerto en el cual estå conectado su ratón. Después de\n"
-"seleccionar un ratĂłn y presionar el botĂłn \"Siguiente ->\", se muestra una\n"
-"imagen de un ratĂłn en la pantalla. Mueva la rueda de su ratĂłn para\n"
-"asegurarse que estĂĄ activa correctamente. Una vez que ve que se mueve la\n"
-"rueda en la pantalla a medida que mueve la rueda de su ratĂłn, pruebe los\n"
-"botones y verifique que el puntero del ratĂłn se mueve en la pantalla a\n"
-"medida que mueve su ratĂłn."
+msgid "Set-UID"
+msgstr "Set-UID"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
-msgstr ""
-"El primer paso es elegir el idioma de instalaciĂłn. En el ejemplo se elige\n"
-"\"America->Español\".\n"
-"\n"
-"Su elecciĂłn de idioma preferido afectarĂĄ el idioma de la documentaciĂłn, el\n"
-"instalador y el sistema en general. Seleccione primero la regiĂłn en la que\n"
-"se encuentra, y luego el idioma que habla.\n"
-"\n"
-"Al hacer clic sobre el botĂłn \"Avanzado\" podrĂĄ seleccionar otros idiomas\n"
-"para instalar en su estaciĂłn de trabajo, instalando asĂ­ los archivos\n"
-"especĂ­ficos para esos idiomas para la documentaciĂłn y las aplicaciones. Por\n"
-"ejemplo, si albergarå a gente de Francia en su måquina, seleccione Español\n"
-"como idioma principal en la vista de årbol y \"Francés|Francia\" en la\n"
-"secciĂłn avanzada.\n"
-"\n"
-"Note que no estĂĄ limitado a elegir un Ășnico idioma adicional. Puede elegir\n"
-"varios, o incluso instalarlos a todos eligiendo la casilla \"Todos los\n"
-"idiomas\". Seleccionar el soporte para un idioma significa que se\n"
-"instalarĂĄn las traducciones, tipografĂ­as, correctores ortogrĂĄficos, etc.\n"
-"para dicho idioma. Adicionalmente, la casilla \"Usar Unicode\n"
-"predeterminadamente\" permite forzar al sistema a utilizar Unicode (UTF-8)\n"
-"Sin embargo, note que esta es una caracterĂ­stica experimental. Si\n"
-"selecciona diferentes idiomas que necesitan codificaciones diferentes de\n"
-"todas formas se instalarĂĄ el soporte para Unicode.\n"
-"\n"
-"Para cambiar de un idioma a otro, Usted puede ejecutar, como \"root\", el\n"
-"comando \"/usr/sbin/localedrake\" para cambiar el idioma de todo el\n"
-"sistema, o ejecutarlo como usuario no privilegiado para cambiar sĂłlo el\n"
-"idioma predeterminado de ese usuario.\n"
-"\n"
-"(*) Ya que de ahĂ­ viene el traductor [:-)]"
+msgid "Please check if you are using CDRW media"
+msgstr "Por favor, marque si estĂĄ utilizando un soporte CDRW"
# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
#: ../../help.pm:1
#, c-format
msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
msgstr ""
-"Dependiendo del idioma predeterminado que eligiĂł en , DrakX selecciona\n"
-"automĂĄticamente un tipo particular de configuraciĂłn del teclado. Sin\n"
-"embargo, podrĂ­a no tener un teclado que se corresponde exactamente con su\n"
-"idioma: por ejemplo, si Usted es un argentino que habla inglés, todavía\n"
-"podrĂ­a desear que su teclado sea un teclado Latinoamericano. O si habla\n"
-"castellano pero estĂĄ en Inglaterra puede estar en la misma situaciĂłn en la\n"
-"cual su idioma nativo y su teclado no coinciden. En cualquier caso, este\n"
-"paso de instalaciĂłn le permitirĂĄ elegir un teclado apropiado de una lista.\n"
-"\n"
-"Haga clic sobre el botĂłn \"MĂĄs\" para que se le presente la lista completa\n"
-"de los teclados soportados.\n"
-"\n"
-"Si eligiĂł una distribuciĂłn de teclado basada en un alfabeto no latino, el\n"
-"prĂłximo diĂĄlogo le permitirĂĄ elegir la combinaciĂłn de teclas que cambiarĂĄ\n"
-"la distribuciĂłn del teclado entre la latina y la no latina."
+"Elija la unidad de disco que desea borrar para instalar su particiĂłn\n"
+"Mandrake Linux nueva. Tenga cuidado, ÂĄse perderĂĄn todos los datos de la\n"
+"misma y no se podrĂĄn recuperar!."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
-"Este paso se activa sĂłlo si se encontrĂł una particiĂłn GNU/Linux antigua en\n"
-"su sistema.\n"
-"\n"
-"DrakX ahora necesita saber si desea realizar una instalaciĂłn nueva o una\n"
-"actualizaciĂłn de un sistema Mandrake Linux existente:\n"
-"\n"
-" * \"Instalar\": Esta opciĂłn borrarĂĄ prĂĄcticamente por completo el sistema\n"
-"anterior. Si desea cambiar la forma en que se particionan sus discos, o\n"
-"cambiar el sistema de archivos, deberĂ­a utilizar esta opciĂłn. Sin embargo,\n"
-"dependiendo de su esquema de particionado, puede evitar que se\n"
-"sobre-escriban algunos datos existentes.\n"
-"\n"
-" * \"ActualizaciĂłn\": Esta clase de instalaciĂłn le permite actualizar los\n"
-"paquetes que en este momento estĂĄn instalados en su sistema Mandrake Linux.\n"
-"No se alteran las particiones corrientes de sus discos ni los datos de los\n"
-"usuarios. La mayorĂ­a de los otros pasos de configuraciĂłn permanecen\n"
-"disponibles, de manera similar a lo que ocurre con una instalaciĂłn\n"
-"estĂĄndar.\n"
-"\n"
-"El uso de la opciĂłn \"Actualizar\" deberĂ­a funcionar sin problemas para los\n"
-"sistemas Mandrake Linux que corren la versiĂłn \"8.1\" o una posterior. No\n"
-"se recomienda realizar una actualizaciĂłn sobre versiones anteriores a\n"
-"Mandrake Linux versiĂłn \"8.1\"."
+msgid " on parallel port \\#%s"
+msgstr " en el puerto paralelo \\#%s"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
-"\"PaĂ­s\": verifique la selecciĂłn corriente del paĂ­s. Si Usted no se\n"
-"encuentra en este paĂ­s, haga clic sobre el botĂłn \"Configurar\" y elija\n"
-"otro. Si su paĂ­s no se muestra en la primer lista, haga clic sobre el botĂłn\n"
-"\"MĂĄs\" para obtener la lista completa de paĂ­ses."
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "Use las teclas %c y %c para seleccionar una entrada."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Se ha detectado mĂĄs de una particiĂłn Microsoft Windows en su disco rĂ­gido.\n"
-"Por favor, elija aquella a la cual desea cambiarle el tamaño para poder\n"
-"instalar su sistema operativo Mandrake Linux nuevo.\n"
-"\n"
-"Cada particiĂłn se lista como sigue: \"Nombre Linux\", \"Nombre Windows\"\n"
-"\"Capacidad\".\n"
-"\n"
-"\"Nombre Linux\" estĂĄ estructurado: \"tipo de disco rĂ­gido\", \"nĂșmero de\n"
-"disco rĂ­gido\", \"nĂșmero de particiĂłn\" (por ejemplo, \"hda1\").\n"
-"\n"
-"\"Tipo de disco rĂ­gido\" es \"hd\" si su disco es un disco IDE y \"sd\" si\n"
-"el mismo es un disco SCSI.\n"
-"\n"
-"\"NĂșmero de disco rĂ­gido\" siempre es una letra que sigue a \"hd\" o a\n"
-"\"sd\". Para los discos IDE:\n"
-"\n"
-" * \"a\" significa \"disco rĂ­gido maestro en la controladora IDE\n"
-"primaria\",\n"
-"\n"
-" * \"b\" significa \"disco rĂ­gido esclavo en la controladora IDE\n"
-"primaria\",\n"
-"\n"
-" * \"c\" significa \"disco rĂ­gido maestro en la controladora IDE\n"
-"secundaria\",\n"
-"\n"
-" * \"d\" significa \"disco rĂ­gido esclavo en la controladora IDE\n"
-"secundaria\".\n"
-"\n"
-"Para los discos SCSI, una \"a\" significa \"SCSI ID menor\", una \"b\"\n"
-"significa \"segunda SCSI ID menor\", etc.\n"
-"\n"
-"\"Nombre Windows\" es la letra de su unidad de disco bajo Windows (el\n"
-"primer disco o particiĂłn se denomina \"C:\")."
+msgid "Generic 2 Button Mouse"
+msgstr "Ratón de 2 botones genérico"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../lvm.pm:1
#, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Ahora necesita elegir qué particiones se utilizarån para la instalación de\n"
-"su sistema Mandrake Linux. Si las particiones ya han sido definidas, ya sea\n"
-"por una instalaciĂłn previa de GNU/Linux o con otra herramienta de\n"
-"particionado, puede utilizarlas. De lo contrario, se deben definir\n"
-"particiones en el disco rĂ­gido.\n"
-"\n"
-"Para crear particiones, primero debe seleccionar un disco rĂ­gido. Puede\n"
-"seleccionar el disco a particionar haciendo clic sobre \"hda\" para el\n"
-"primer disco IDE, \"hdb\" para el segundo, \"sda\" para el primer disco\n"
-"SCSI y asĂ­ sucesivamente.\n"
-"\n"
-"Para particionar el disco rĂ­gido seleccionado, puede utilizar estas\n"
-"opciones:\n"
-"\n"
-" * \"Borrar todo\": esta opciĂłn borra todas las particiones sobre el disco\n"
-"seleccionado.\n"
-"\n"
-" * \"AsignaciĂłn automĂĄtica\": esta opciĂłn le permite crear particiones ext3\n"
-"y swap automĂĄticamente en el espacio libre de su disco rĂ­gido.\n"
-"\n"
-" * \"MĂĄs\": le da acceso a caracterĂ­sticas adicionales:\n"
-"\n"
-" * \"Guardar tabla de particiones\": guarda la tabla de particiones en\n"
-"un disquete. Útil para recuperar la tabla de particiones más adelante en\n"
-"caso que sea necesario. Es altamente recomendable realizar este paso.\n"
-"\n"
-" * \"Recuperar tabla de particiones\": esta opciĂłn le permitirĂĄ\n"
-"restaurar una tabla de particiones guardada previamente en un disquete.\n"
-"\n"
-" * \"Rescatar tabla de particiones\": si su tabla de particiones estĂĄ\n"
-"dañada puede intentar recuperarla utilizando esta opción. Por favor, tenga\n"
-"cuidado y recuerde que puede fallar.\n"
-"\n"
-" * \"Volver a cargar\": descarta todos los cambios y carga su tabla de\n"
-"particiones inicial.\n"
-"\n"
-" * \"Montaje automĂĄtico de soportes removibles\": si desmarca esta\n"
-"opciĂłn los usuarios estarĂĄn forzados a montar y desmontar manualmente los\n"
-"soportes removibles como los disquetes y los CD-ROM.\n"
-"\n"
-" * \"Asistente\": use esta opciĂłn si desea utilizar un asistente para\n"
-"particionar su disco rĂ­gido. Se recomienda esto si no tiene un buen\n"
-"conocimiento del particionado.\n"
-"\n"
-" * \"Deshacer\": use esta opciĂłn para cancelar sus cambios.\n"
-"\n"
-" * \"Cambiar a modo normal/experto\": permite realizar acciones adicionales\n"
-"sobre las particiones (tipo, opciones, formatear) y brinda mĂĄs informaciĂłn.\n"
-"\n"
-" * \"Hecho\": cuando ha terminado de particionar su disco rĂ­gido, esto\n"
-"guardarĂĄ sus cambios en el disco.\n"
-"\n"
-"Cuando se define el tamaño de una partición, puede realizar un ajuste fino\n"
-"del tamaño utilizando las teclas de las flechas de su teclado.\n"
-"\n"
-"Nota: todas las opciones son accesibles por medio del teclado. Navegue a\n"
-"través de las particiones usando [Tab] y las flechas [Arriba/Abajo].\n"
-"\n"
-"Cuando se selecciona una particiĂłn, puede utilizar:\n"
-"\n"
-" * [Ctrl][C] para crear una particiĂłn nueva (cuando estĂĄ seleccionada una\n"
-"particiĂłn vacĂ­a);\n"
-"\n"
-" * [Ctrl][D] para borrar una particiĂłn;\n"
-"\n"
-" * [Ctrl][M] para configurar el punto de montaje.\n"
-"\n"
-"Para obtener informaciĂłn sobre los distintos tipos de sistemas de archivos\n"
-"disponibles, por favor lea el capĂ­tulo acerca de ext2FS del \"Manual de\n"
-"Referencia\".\n"
-"\n"
-"Si estå instalando en una måquina PPC, querrå crear una pequeña partición\n"
-"HFS de \"bootstrap\" de al menos 1 MB que serĂĄ utilizada por el cargador de\n"
-"arranque yaboot. Si opta por hacer la particiĂłn un poco mĂĄs grande, digamos\n"
-"50 MB, puede ver que es un lugar Ăștil para almacenar un nĂșcleo y ramdisk\n"
-"alternativos para arrancar en situaciones de emergencia."
+msgid "Remove the logical volumes first\n"
+msgstr "Quite los volĂșmenes lĂłgicos primero\n"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"En este punto, DrakX le permitirĂĄ elegir el nivel de seguridad deseado para\n"
-"la mĂĄquina. Como regla general, el nivel de seguridad deberĂ­a ser mayor\n"
-"cuanto mĂĄs cruciales sean los datos que tenga almacenados, o si serĂĄ una\n"
-"mĂĄquina directamente expuesta a la Internet. Sin embargo, un nivel de\n"
-"seguridad mĂĄs alto generalmente se obtiene a expensas de la facilidad de\n"
-"uso.\n"
-"\n"
-"Si no sabe que elegir, mantenga la opciĂłn predeterminada."
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "Se va a iniciar la entrada resaltada en %d segundos."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
msgstr ""
-"Es probable que cuando instale Mandrake Linux algunos paquetes se hayan\n"
-"actualizado desde la publicaciĂłn inicial. Se pueden haber corregido algunos\n"
-"errores, y solucionado problemas de seguridad. Para permitir que Usted se\n"
-"beneficie de estas actualizaciones, ahora se le propone transferirlas desde\n"
-"la Internet. Marque \"SĂ­\" si tiene funcionando una conexiĂłn con la\n"
-"Internet, o \"No\" si prefiere instalar los paquetes actualizados mĂĄs\n"
-"tarde.\n"
-"\n"
-"Si elige \"SĂ­\" se mostrarĂĄ una lista de lugares desde los que se pueden\n"
-"obtener las actualizaciones. Elija el mĂĄs cercano a Usted. Luego aparece un\n"
-"ĂĄrbol de selecciĂłn de paquetes: revise la selecciĂłn y presione \"Instalar\"\n"
-"para transferir e instalar los paquetes seleccionados, o \"Cancelar\" para\n"
-"abortar."
+"No se puede escribir /etc/sysconfig/bootsplash\n"
+"No se encuentra el archivo."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet access"
+msgstr "Acceso a Internet"
+
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
+"y coordinate of text box\n"
+"in number of characters"
msgstr ""
-"Se debe formatear cualquier particiĂłn nueva que ha sido definida para que\n"
-"se pueda utilizar (formatear significa crear un sistema de archivos)\n"
-"\n"
-"Puede desear volver a formatear algunas particiones ya existentes para\n"
-"borrar cualquier dato que pudieran contener. Si asĂ­ lo desea, por favor\n"
-"seleccione también dichas particiones.\n"
-"\n"
-"Por favor note que no es necesario volver a formatear todas las particiones\n"
-"pre-existentes. Debe volver a formatear las particiones que contienen el\n"
-"sistema operativo (tales como \"/\", \"/usr\" o \"/var\") pero no tiene que\n"
-"volver a formatear particiones que contienen datos que desea preservar\n"
-"(tĂ­picamente \"/home\")\n"
-"\n"
-"Por favor, tenga sumo cuidado cuando selecciona las particiones. Después de\n"
-"formatear, se borrarĂĄn todos los datos en las particiones seleccionadas y\n"
-"no podrĂĄ recuperarlos en absoluto.\n"
-"\n"
-"Haga clic sobre \"Siguiente ->\" cuando esté listo para formatear las\n"
-"particiones.\n"
-"\n"
-"Haga clic sobre \"<- Anterior\" si desea elegir otra particiĂłn para la\n"
-"instalaciĂłn de su sistema operativo Mandrake Linux nuevo.\n"
-"\n"
-"Haga clic sobre \"Avanzada\" si desea seleccionar las particiones en las\n"
-"que se buscarĂĄn bloques defectuosos en el disco."
+"coordenada y del cuadro de texto\n"
+"en cantidad de caracteres"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
msgstr ""
-"Ya estĂĄ. Ahora la instalaciĂłn estĂĄ completa y su sistema GNU/Linux estĂĄ\n"
-"listo para ser utilizado. Simplemente haga clic sobre \"Siguiente ->\" para\n"
-"volver a arrancar el sistema. Lo primero que deberĂ­a ver tan pronto como su\n"
-"mĂĄquina haya finalizado sus pruebas de hardware es el menĂș del cargador de\n"
-"arranque, dĂĄndole la elecciĂłn de cuĂĄl sistema operativo arrancar.\n"
-"\n"
-"El botĂłn \"Avanzada\" le muestra dos botones mĂĄs para:\n"
-"\n"
-" * \"Generar un disquete de instalaciĂłn automĂĄtica\": para crear un\n"
-"disquete de instalaciĂłn que realizarĂĄ una instalaciĂłn completa\n"
-"automĂĄticamente, sin la asistencia de un operador, similar a la instalaciĂłn\n"
-"que ha configurado recién.\n"
-"\n"
-" Note que hay dos opciones diferentes disponibles después de hacer clic\n"
-"sobre el botĂłn:\n"
-"\n"
-" * \"Reproducir\" . Esta es una instalaciĂłn parcialmente automatizada.\n"
-"La etapa de particionado es el Ășnico procedimiento interactivo.\n"
-"\n"
-" * \"Automatizada\" . InstalaciĂłn completamente automatizada: el disco\n"
-"rĂ­gido se sobreescribe por completo, y se pierden todos los datos.\n"
-"\n"
-" Esta caracterĂ­stica es muy Ăștil cuando se instala una cantidad grande de\n"
-"måquinas similares. Consulte la sección Auto install (en inglés) en nuestro\n"
-"sitio web para mĂĄs informaciĂłn.\n"
-"\n"
-" * \"Guardar selecciĂłn de paquetes\"(*): guarda una lista de los paquetes\n"
-"seleccionados en esta instalaciĂłn. Para usar esta selecciĂłn con otra\n"
-"instalaciĂłn, inserte el disquete en la disquetera y comience la\n"
-"instalaciĂłn. En el prompt, presione la tecla [F1], y a continuaciĂłn ingrese\n"
-">>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) Necesita un disquete formateado con FAT (para crear uno bajo GNU/Linux\n"
-"teclee \"mformat a:\")"
+"Para obtener una lista de las opciones disponibles para la impresora actual, "
+"haga clic en el botĂłn \"Imprimir lista de opciones\"."
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Enabling servers..."
+msgstr "Activando los servidores..."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing test page(s)..."
+msgstr "Imprimir la(s) pĂĄgina(s) de prueba..."
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "There is already a partition with mount point %s\n"
+msgstr "Ya existe una particiĂłn con el punto de montaje %s\n"
# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
@@ -2390,51 +2232,49 @@ msgid ""
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
msgstr ""
"Ahora necesita elegir el lugar de su disco rĂ­gido donde se instalarĂĄ su\n"
"sistema operativo Mandrake Linux. Si su disco rĂ­gido estĂĄ vacĂ­o o si un\n"
@@ -2453,345 +2293,177 @@ msgstr ""
"Dependiendo de la configuraciĂłn de su disco rĂ­gido, estĂĄn disponibles\n"
"varias opciones:\n"
"\n"
-" * \"Usar espacio libre\": esta opciĂłn simplemente llevarĂĄ a un\n"
-"particionado automĂĄtico de su(s) disco(s) vacĂ­o(s). Si elige esta opciĂłn,\n"
-"no se le pedirĂĄn mĂĄs detalles ni se le formularĂĄn mĂĄs preguntas.\n"
-"\n"
-" * \"Usar particiĂłn existente\": el asistente ha detectado una o mĂĄs\n"
-"particiones Linux existentes en su disco rĂ­gido. Si desea utilizarlas,\n"
-"elija esta opciĂłn. Entonces se le pedirĂĄ que elija los puntos de montaje\n"
-"asociados a cada una de las particiones. Los puntos de montaje legados se\n"
-"seleccionan automĂĄticamente, y por lo general deberĂ­a mantenerlos.\n"
-"\n"
-" * \"Usar el espacio libre en la particiĂłn Windows\": si Microsoft Windows\n"
-"estĂĄ instalado en su disco rĂ­gido y ocupa todo el espacio disponible en el\n"
-"mismo, Usted tiene que liberar espacio para los datos de Linux. Para\n"
-"hacerlo, puede borrar su particiĂłn y datos Microsoft Windows (vea la\n"
-"solución \"Borrar el disco completo\") o cambie el tamaño de su partición\n"
-"Microsoft Windows FAT. El cambio de tamaño se puede realizar sin la pérdida\n"
-"de datos, siempre y cuando Usted haya desfragmentado con anterioridad la\n"
-"particiĂłn Windows y que la misma utiliza el formato FAT. Es altamente\n"
-"recomendable hacer una copia de respaldo de sus datos.. Se recomienda usar\n"
-"esta soluciĂłn si desea utilizar tanto Mandrake Linux como Microsoft Windows\n"
-"en la misma computadora.\n"
+" * \"%s\": esta opciĂłn simplemente llevarĂĄ a un particionado automĂĄtico de\n"
+"su(s) disco(s) vacĂ­o(s). Si elige esta opciĂłn, no se le pedirĂĄn mĂĄs\n"
+"detalles ni se le formularĂĄn mĂĄs preguntas.\n"
+"\n"
+" * \"%s\": el asistente ha detectado una o mĂĄs particiones Linux existentes\n"
+"en su disco rĂ­gido. Si desea utilizarlas, elija esta opciĂłn. Entonces se le\n"
+"pedirĂĄ que elija los puntos de montaje asociados a cada una de las\n"
+"particiones. Los puntos de montaje legados se seleccionan automĂĄticamente,\n"
+"y por lo general deberĂ­a mantenerlos.\n"
+"\n"
+" * \"%s\": si Microsoft Windows estĂĄ instalado en su disco rĂ­gido y ocupa\n"
+"todo el espacio disponible en el mismo, Usted tiene que liberar espacio\n"
+"para los datos de Linux. Para hacerlo, puede borrar su particiĂłn y datos\n"
+"Microsoft Windows (vea la soluciĂłn \"Borrar el disco completo\") o cambiar\n"
+"el tamaño de su partición Microsoft Windows FAT. El cambio de tamaño se\n"
+"puede realizar sin la pérdida de datos, siempre y cuando Usted haya\n"
+"desfragmentado con anterioridad la particiĂłn Windows y que la misma utiliza\n"
+"el formato FAT. Es altamente recomendable hacer una copia de respaldo de\n"
+"sus datos. Se recomienda usar esta soluciĂłn si desea utilizar tanto\n"
+"Mandrake Linux como Microsoft Windows en la misma computadora.\n"
"\n"
" Antes de elegir esta opción, por favor comprenda que después de este\n"
-"procedimiento, el tamaño de su partición Microsoft Windows serå mås pequeño\n"
+"procedimiento el tamaño de su partición Microsoft Windows serå mås pequeño\n"
"que cuando comenzĂł. TendrĂĄ menos espacio bajo Microsoft Windows para\n"
"almacenar sus datos o instalar software nuevo.\n"
"\n"
-" * \"Borrar el disco entero\": si desea borrar todos los datos y todas las\n"
-"particiones presentes en su disco rĂ­gido y reemplazarlas con su nuevo\n"
-"sistema Mandrake Linux, elija esta opciĂłn. Tenga cuidado con esta soluciĂłn\n"
-"ya que no podrå revertir su elección después de confirmarla.\n"
+" * \"%s\": si desea borrar todos los datos y todas las particiones\n"
+"presentes en su disco rĂ­gido y reemplazarlos con su nuevo sistema Mandrake\n"
+"Linux, elija esta opciĂłn. Tenga cuidado con esta soluciĂłn ya que no podrĂĄ\n"
+"revertir su elección después de confirmarla.\n"
"\n"
" !! Si elige esta opciĂłn, se perderĂĄn todos los datos en su disco. !!\n"
"\n"
-" * \"Quitar Windows\": esto simplemente borrarĂĄ todo en el disco y\n"
-"comenzarĂĄ particionando todo desde cero. Se perderĂĄn todos los datos en su\n"
-"disco.\n"
+" * \"%s\": esto simplemente borrarĂĄ todo en el disco y comenzarĂĄ\n"
+"particionando todo desde cero. Se perderĂĄn todos los datos en su disco.\n"
"\n"
" !! Si elige esta opciĂłn, se perderĂĄn todos los datos en su disco. !!\n"
"\n"
-" * \"Particionamiento personalizado\": elija esta opciĂłn si desea\n"
-"particionar manualmente su disco rĂ­gido. Tenga cuidado - esta es una\n"
-"elecciĂłn potente pero peligrosa y puede perder todos sus datos con\n"
-"facilidad. Esa es la razĂłn por la cual esta opciĂłn realmente sĂłlo se\n"
-"recomienda si ha hecho algo como esto antes y tiene algo de experiencia.\n"
-"Para mĂĄs instrucciones acerca de la utilizaciĂłn de el utilitario DiskDrake,\n"
-"consulte la secciĂłn \"Administrar sus particiones\" de la \"GuĂ­a de\n"
-"Comienzo\"."
+" * \"%s\": elija esta opciĂłn si desea particionar manualmente su disco\n"
+"rĂ­gido. Tenga cuidado - esta es una elecciĂłn potente pero peligrosa y puede\n"
+"perder todos sus datos con facilidad. Esa es la razĂłn por la cual esta\n"
+"opciĂłn realmente sĂłlo se recomienda si ha hecho algo como esto antes y\n"
+"tiene algo de experiencia. Para mĂĄs instrucciones acerca de la utilizaciĂłn\n"
+"del utilitario DiskDrake, consulte la secciĂłn \"Administrar sus\n"
+"particiones\" de la \"GuĂ­a de Comienzo\"."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Opciones\n"
-"\n"
-" AquĂ­ puede elegir si desea que su mĂĄquina cambie automĂĄticamente a la\n"
-"interfaz grĂĄfica al arrancar. Obviamente, querrĂĄ marcar \"No\" si su\n"
-"sistema actuarĂĄ como servidor, o si no tuvo Ă©xito en la configuraciĂłn de su\n"
-"pantalla."
+msgid "Ukraine"
+msgstr "Ucrania"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
-"En caso que estén disponibles diferentes servidores para su tarjeta, con o\n"
-"sin aceleraciĂłn de 3D, entonces se le propone elegir el servidor que mejor\n"
-"satisface sus necesidades."
+msgid "Application:"
+msgstr "AplicaciĂłn:"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
-msgstr ""
-"ResoluciĂłn\n"
-"\n"
-" AquĂ­ puede elegir las resoluciones y profundidades de color entre\n"
-"aquellas disponibles para su hardware. Elija la que mejor se ajuste a sus\n"
-"necesidades (tenga presente que eso se puede cambiar luego de la\n"
-"instalaciĂłn) En el monitor se muestra un ejemplo de la configuraciĂłn\n"
-"elegida."
+msgid "External ISDN modem"
+msgstr "MĂłdem RDSI externo"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
-msgstr ""
-"Monitor\n"
-"\n"
-" Normalmente el instalador puede detectar y configurar automĂĄticamente el\n"
-"monitor conectado a su mĂĄquina. Si este no es el caso, en esta lista puede\n"
-"elegir el monitor que realmente posee."
+msgid "if set to yes, report check result by mail."
+msgstr "si se pone en sĂ­, reportar resultado de verificaciĂłn por correo-e."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Your choice? (default %s) "
+msgstr "ÂżSu elecciĂłn? (por defecto %s)"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
+msgstr "SoluciĂłn de problemas"
+
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid " / Region"
+msgstr " / RegiĂłn"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
+"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
-"Test\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
"\n"
-"Options\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
-" You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
-"X (por \"X Window System\") es el corazĂłn de la interfaz grĂĄfica de\n"
-"GNU/Linux en el que se apoyan todos los entornos grĂĄficos (KDE, GNOME,\n"
-"AfterStep, WindowMaker, etc.) que se incluyen con Mandrake Linux.\n"
-"\n"
-"Se le presentarĂĄ la lista de parĂĄmetros diferentes a cambiar para obtener\n"
-"una presentaciĂłn grĂĄfica Ăłptima: Tarjeta grĂĄfica\n"
-"\n"
-" Normalmente el instalador puede detectar y configurar automĂĄticamente la\n"
-"tarjeta grĂĄfica instalada en su mĂĄquina. Si este no es el caso, en esta\n"
-"lista puede elegir la tarjeta que realmente posee.\n"
-"\n"
-" En caso que estén disponibles diferentes servidores para su tarjeta, con\n"
-"o sin aceleraciĂłn de 3D, entonces se le propone elegir el servidor que\n"
-"mejor satisface sus necesidades.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" Normalmente el instalador puede detectar y configurar automĂĄticamente el\n"
-"monitor conectado a su mĂĄquina. Si este no es el caso, en esta lista puede\n"
-"elegir el monitor que realmente posee.\n"
-"\n"
-"\n"
-"\n"
-"ResoluciĂłn\n"
-"\n"
-" AquĂ­ puede elegir las resoluciones y profundidades de color entre\n"
-"aquellas disponibles para su hardware. Elija la que mejor se ajuste a sus\n"
-"necesidades (tenga presente que eso se puede cambiar luego de la\n"
-"instalaciĂłn) En el monitor se muestra un ejemplo de la configuraciĂłn\n"
-"elegida.\n"
-"\n"
+"El probador de sonido clĂĄsico va a ejecutar los comandos siguientes:\n"
"\n"
"\n"
-"Probar\n"
+"- \"lspcidrake -v | fgrep AUDIO\" le dirå qué controlador predet. usa su\n"
+"tarjeta de sonido\n"
"\n"
-" El sistema intentarĂĄ abrir una pantalla grĂĄfica con la resoluciĂłn\n"
-"deseada. Si puede ver el mensaje durante la prueba, y responde \"SĂ­\",\n"
-"entonces DrakX continuarĂĄ con el paso siguiente. Si no puede ver el\n"
-"mensaje, significa que alguna parte de la configuraciĂłn detectada\n"
-"automĂĄticamente no era la correcta y la prueba terminarĂĄ automĂĄticamente\n"
-"luego de 12 segundos, restaurando el menĂș. Cambie los ajustes hasta obtener\n"
-"una pantalla correcta.\n"
+"- \"grep sound-slot /etc/modules.conf\n"
+"\" le dirå qué controlador usa la misma\n"
+"en este momento\n"
"\n"
+"- \"/sbin/lsmod\" le permitirĂĄ verificar si su mĂłdulo (controlador) estĂĄ\n"
+"cargado o no\n"
"\n"
+"- \"/sbin/chkconfig --list sound\" y \"/sbin/chkconfig --list alsa\" le "
+"dirĂĄ\n"
+"si los servicios alsa y sonido estĂĄn configurados para correr en el nivel\n"
+"de ejecuciĂłn 3\n"
"\n"
-"Opciones\n"
+"- \"aumix -q\" le dirĂĄ si el volumen del sonido estĂĄ mudo o no\n"
"\n"
-" AquĂ­ puede elegir si desea que su mĂĄquina cambie automĂĄticamente a la\n"
-"interfaz grĂĄfica al arrancar. Obviamente, querrĂĄ marcar \"No\" si su\n"
-"sistema actuarĂĄ como servidor, o si no tuvo Ă©xito en la configuraciĂłn de su\n"
-"pantalla."
+"- \"/sbin/fuser -v /dev/dsp\" le dirå qué programa utiliza la tarjeta de "
+"sonido.\n"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
msgstr ""
-"Tarjeta grĂĄfica\n"
-"\n"
-" Normalmente el instalador puede detectar y configurar automĂĄticamente la\n"
-"tarjeta grĂĄfica instalada en su mĂĄquina. Si este no es el caso, en esta\n"
-"lista puede elegir la tarjeta que realmente posee.\n"
+"La(s) pĂĄgina(s) de prueba se enviaron a la impresora.\n"
+"Puede que pase algo de tiempo antes de que comience la impresiĂłn.\n"
+"Estado de la impresiĂłn:\n"
+"%s\n"
"\n"
-" En caso que estén disponibles diferentes servidores para su tarjeta, con\n"
-"o sin aceleraciĂłn de 3D, entonces se le propone elegir el servidor que\n"
-"mejor satisface sus necesidades."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
-msgstr ""
-"GNU/Linux administra la hora en GMT (\"Greenwich Mean Time\", Hora del\n"
-"Meridiano de Greenwich) y la traduce a la hora local de acuerdo al huso\n"
-"horario que Usted seleccionĂł. Sin embargo, es posible desactivar esto\n"
-"quitando la marca de la casilla \"Reloj interno puesto a GMT\", lo que harĂĄ\n"
-"que GNU/Linux sepa que el reloj del sistema y el reloj de hardware estĂĄn en\n"
-"el mismo huso horario. Esto es Ăștil cuando la mĂĄquina tambiĂ©n alberga otro\n"
-"sistema operativo como Windows.\n"
-"\n"
-"La opciĂłn \"SincronizaciĂłn automĂĄtica de hora (usando NTP)\" regularĂĄ\n"
-"automĂĄticamente el reloj conectĂĄndose a un servidor remoto de la hora en la\n"
-"Internet. Para que esta caracterĂ­stica funcione, debe tener una conexiĂłn\n"
-"con la Internet funcionando. En realidad, esta opciĂłn instala un servidor\n"
-"de la hora que puede ser utilizado por otras mĂĄquinas en su red local."
+msgid "daily"
+msgstr "cada dĂ­a"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Este diĂĄlogo se usa para elegir los servicios que desea iniciar durante el\n"
-"arranque.\n"
-"\n"
-"DrakX listarĂĄ todos los servicios disponibles con la instalaciĂłn corriente.\n"
-"Debe revisarlos con cuidado y quitar la marca de aquellos que no siempre\n"
-"son necesarios al arrancar.\n"
-"\n"
-"Cuando se selecciona un servicio obtendrå un pequeño texto explicativo\n"
-"acerca del mismo. Sin embargo, si no estĂĄ seguro si un servicio es Ăștil o\n"
-"no, es mĂĄs seguro dejar el comportamiento predeterminado.\n"
-"\n"
-"!! Tenga mucho cuidado en esta etapa si pretende usar su mĂĄquina como un\n"
-"servidor: probablemente no desearĂĄ arrancar servicios que no necesita. Por\n"
-"favor recuerde que varios servicios pueden ser peligrosos si se habilitan\n"
-"en un servidor. En general, seleccione sĂłlo aquellos servicios que\n"
-"realmente necesita. !!"
+msgid "and one unknown printer"
+msgstr "y una impresora desconocida estĂĄ "
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
-"\"Impresora\": al hacer clic sobre el botĂłn \"Configurar\" se abrirĂĄ el\n"
-"asistente de configuraciĂłn de la impresora. Consulte el capĂ­tulo\n"
-"correspondiente de la \"GuĂ­a de Comienzo\" para mĂĄs informaciĂłn sobre cĂłmo\n"
-"configurar una impresora nueva. La interfaz presentada allĂ­ es similar a la\n"
-"utilizada durante la instalaciĂłn."
+msgid "Ireland"
+msgstr "Irlanda"
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "kernel version"
+msgstr "versiĂłn del nĂșcleo"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid " Restore Configuration "
+msgstr " ConfiguraciĂłn de la restauraciĂłn"
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Is this the correct setting?"
+msgstr "ÂżEs esta la configuraciĂłn correcta?"
# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
@@ -2799,11 +2471,11 @@ msgstr ""
#, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
@@ -2817,15 +2489,14 @@ msgid ""
"for details about the configuration, or simply wait until your system is\n"
"installed and use the program described there to configure your connection."
msgstr ""
-"Ahora se le propone configurar su conexiĂłn de red/Internet. Si desea\n"
-"conectar su computadora a la Internet o a una red de ĂĄrea local, haga clic\n"
-"sobre \"Siguiente ->\". Mandrake Linux intentarĂĄ detectar automĂĄticamente\n"
-"los dispositivos de red y mĂłdems. Si esta detecciĂłn falla, quite la marca\n"
-"de la casilla \"Usar detección automåtica\". También puede elegir no\n"
-"configurar la red, o hacerlo mĂĄs tarde, en cuyo caso hacer clic sobre el\n"
-"botĂłn \"Cancelar\" lo llevarĂĄ al paso siguiente.\n"
+"Ahora se le propone configurar su conexiĂłn de red/Internet. Haga clic sobre\n"
+"\"%s\" si desea conectar su computadora a la Internet o a una red de ĂĄrea\n"
+"local. Mandrake Linux intentarĂĄ detectar automĂĄticamente los dispositivos\n"
+"de red y mĂłdems. Si esta detecciĂłn falla, quite la marca de la casilla\n"
+"\"%s\". También puede elegir no configurar la red, o hacerlo mås tarde, en\n"
+"cuyo caso hacer clic sobre el botĂłn \"%s\" lo llevarĂĄ al paso siguiente.\n"
"\n"
-"Cuando configura su red, los tipos de conexiĂłn disponibles son: mĂłdem\n"
+"Cuando configura su red los tipos de conexiĂłn disponibles son: mĂłdem\n"
"tradicional, mĂłdem RDSI (ISDN), conexiĂłn ADSL, cable mĂłdem, y finalmente\n"
"una simple conexiĂłn LAN (Ethernet).\n"
"\n"
@@ -2840,4688 +2511,4411 @@ msgstr ""
"hasta que su sistema esté instalado y usar el programa que se describe allí\n"
"para configurar su conexiĂłn."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
-"Si le dijo al instalador que deseaba seleccionar los paquetes individuales,\n"
-"el mismo presentarĂĄ un ĂĄrbol que contiene todos los paquetes clasificados\n"
-"por grupos y subgrupos. Mientras navega por el ĂĄrbol, puede seleccionar\n"
-"grupos enteros, subgrupos, o paquetes individuales.\n"
-"\n"
-"Tan pronto como selecciona un paquete en el ĂĄrbol, aparece una descripciĂłn\n"
-"del mismo sobre la derecha que le permite conocer el propĂłsito del paquete.\n"
-"\n"
-"Es muy probable que la gran mayorĂ­a de las descripciones de los paquetes\n"
-"estén en inglés.\n"
-"\n"
-"!! Si ha sido seleccionado un paquete de servidor ya sea porque Usted\n"
-"seleccionĂł especĂ­ficamente el paquete individual o porque el mismo era\n"
-"parte de un grupo de paquetes, se le pedirĂĄ que confirme que realmente\n"
-"desea que se instalen esos servidores. Bajo Mandrake Linux, cualquier\n"
-"servidor instalado se inicia de manera predeterminada al momento del\n"
-"arranque. Aunque estos son seguros y no tienen problemas conocidos al\n"
-"momento en que se publicĂł la distribuciĂłn, es posible que se descubran\n"
-"vulnerabilidades en la seguridad luego que se terminĂł con esta versiĂłn de\n"
-"Mandrake Linux. En particular, si no sabe que es lo que se supone que hace\n"
-"un servicio o la razĂłn por la cual se estĂĄ instalando, entonces haga clic\n"
-"sobre \"No\". Si hace clic sobre \"SĂ­\" se instalarĂĄn todos los servicios\n"
-"listados y de manera predeterminada los mismos arrancarĂĄn automĂĄticamente.\n"
-"!!\n"
-"\n"
-"La opciĂłn \"Dependencias automĂĄticas\" simplemente deshabilita el diĂĄlogo\n"
-"de advertencia que aparece cuando el instalador selecciona automĂĄticamente\n"
-"un paquete para resolver un problema de dependencias. Algunos paquetes\n"
-"tienen relaciones entre ellos tales que la instalaciĂłn de un paquete\n"
-"necesita que algĂșn otro programa ya estĂ© instalado. El instalador puede\n"
-"determinar qué paquetes se necesitan para satisfacer una dependencia para\n"
-"completar la instalaciĂłn de manera satisfactoria.\n"
-"\n"
-"El pequeño icono del disquete al final de la lista le permite cargar la\n"
-"lista de paquetes elegida durante una instalaciĂłn previa. Esto es Ăștil si\n"
-"Usted tiene una cantidad de mĂĄquinas que desea configurar de manera\n"
-"idéntica. Haga clic sobre este icono y se le pedirå que inserte un disquete\n"
-"creado con anterioridad al final de otra instalaciĂłn. Vea el segundo\n"
-"consejo del Ășltimo paso para informaciĂłn sobre como crear dicho disquete."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Ahora es el momento de especificar los programas que desea instalar en su\n"
-"sistema. Hay miles de paquetes disponibles para Mandrake Linux, y para\n"
-"hacer mĂĄs simple el manejo de los paquetes, los mismos se han puesto en\n"
-"grupos de aplicaciones similares.\n"
-"\n"
-"Los paquetes se ordenan en grupos que corresponden a un uso particular de\n"
-"su mĂĄquina. Mandrake Linux tiene cuatro instalaciones predefinidas\n"
-"disponibles. Puede pensar en estas clases de instalaciĂłn como contenedores\n"
-"para los distintos paquetes. Puede mezclar y hacer coincidir aplicaciones\n"
-"de varios contenedores, por lo que una instalaciĂłn de \"EstaciĂłn de\n"
-"trabajo\" puede tener instaladas aplicaciones del contenedor\n"
-"\"Desarrollo\".\n"
-"\n"
-" * \"EstaciĂłn de trabajo\": si planifica utilizar su mĂĄquina como una\n"
-"estaciĂłn de trabajo, seleccione una o mĂĄs aplicaciones del contenedor\n"
-"estaciĂłn de trabajo.\n"
-"\n"
-" * \"Desarrollo\": si la mĂĄquina se utilizarĂĄ para programaciĂłn, elija los\n"
-"paquetes apropiados del contenedor.\n"
-"\n"
-" * \"Servidor\": si pretende usar la mĂĄquina como un servidor, seleccione\n"
-"cuĂĄles de los servicios mĂĄs comunes desea instalar en su mĂĄquina.\n"
-"\n"
-" * \"Entorno grĂĄfico\": aquĂ­ es donde seleccionarĂĄ su entorno grĂĄfico\n"
-"preferido. Si desea tener una estaciĂłn de trabajo grĂĄfica, debe seleccionar\n"
-"al menos uno.\n"
-"\n"
-"Si mueve el cursor del ratĂłn sobre el nombre de un grupo se mostrarĂĄ un\n"
-"pequeño texto explicativo acerca de ese grupo. Si deselecciona todos los\n"
-"grupos cuando estĂĄ realizando una instalaciĂłn regular (es decir, no una\n"
-"actualizaciĂłn), aparecerĂĄ un diĂĄlogo que propone opciones diferentes para\n"
-"una instalaciĂłn mĂ­nima:\n"
-"\n"
-" * \"Con X\": instala la menor cantidad de paquetes posible para tener un\n"
-"escritorio grĂĄfico que funcione.\n"
-"\n"
-" * \"Con documentaciĂłn bĂĄsica\": instala el sistema base mĂĄs algunos\n"
-"utilitarios bĂĄsicos y la documentaciĂłn de los mismos. Esta instalaciĂłn es\n"
-"adecuada para configurar un servidor.\n"
-"\n"
-" * \"InstalaciĂłn realmente mĂ­nima\": instalarĂĄ el mĂ­nimo necesario estricto\n"
-"para obtener un sistema Linux que funciona. Con esta instalaciĂłn sĂłlo\n"
-"tendrĂĄ una interfaz de lĂ­nea de comandos. Esta instalaciĂłn ocupa alrededor\n"
-"de 65 MB.\n"
-"\n"
-"Puede marcar la casilla \"SelecciĂłn de paquetes individuales\" que es Ăștil\n"
-"si estĂĄ familiarizado con los paquetes que se ofrecen o si desea tener un\n"
-"control total sobre lo que se instalarĂĄ.\n"
-"\n"
-"Si iniciĂł la instalaciĂłn en el modo \"ActualizaciĂłn\", puede deseleccionar\n"
-"todos los grupos para evitar instalar cualquier paquete nuevo. Esto es Ăștil\n"
-"para reparar o actualizar un sistema existente."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
-msgstr ""
-"La instalaciĂłn de Mandrake Linux se divide en varios CD-ROM. DrakX sabe si\n"
-"un paquete seleccionado se encuentra en otro CD por lo que expulsarĂĄ el CD\n"
-"corriente y le pedirĂĄ que inserte el CD correcto cuando sea necesario."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"AquĂ­ se listan las particiones Linux existentes que se detectaron en su\n"
-"disco rĂ­gido. Puede mantener las elecciones hechas por el asistente, ya que\n"
-"las mismas son buenas para las instalaciones mĂĄs comunes. Si hace cambios,\n"
-"al menos debe definir una particiĂłn raĂ­z (\"/\"). No elija una particiĂłn\n"
-"muy pequeña o no podrå instalar software suficiente. Si desea almacenar sus\n"
-"datos en una partición separada, también puede necesitar crear una\n"
-"particiĂłn para \"/home\" (sĂłlo es posible si tiene mĂĄs de una particiĂłn\n"
-"Linux disponible)\n"
-"\n"
-"Cada particiĂłn se lista como sigue: \"Nombre\", \"Capacidad\".\n"
-"\n"
-"\"Nombre\" estĂĄ estructurado: \"tipo de disco rĂ­gido\", \"nĂșmero de disco\n"
-"rĂ­gido\", \"nĂșmero de particiĂłn\" (por ejemplo, \"hda1\").\n"
-"\n"
-"\"Tipo de disco rĂ­gido\" es \"hd\" si su disco es un disco IDE y \"sd\" si\n"
-"el mismo es un disco SCSI.\n"
-"\n"
-"\"NĂșmero de disco rĂ­gido\" siempre es una letra que sigue a \"hd\" o a\n"
-"\"sd\". Para los discos IDE:\n"
-"\n"
-" * \"a\" significa \"disco rĂ­gido maestro en la controladora IDE\n"
-"primaria\",\n"
-"\n"
-" * \"b\" significa \"disco rĂ­gido esclavo en la controladora IDE\n"
-"primaria\",\n"
-"\n"
-" * \"c\" significa \"disco rĂ­gido maestro en la controladora IDE\n"
-"secundaria\",\n"
-"\n"
-" * \"d\" significa \"disco rĂ­gido esclavo en la controladora IDE\n"
-"secundaria\".\n"
-"\n"
-"Para los discos SCSI, una \"a\" significa \"SCSI ID menor\", una \"b\"\n"
-"significa \"segunda SCSI ID menor\", etc."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
-msgstr ""
-"GNU/Linux es un sistema multiusuario, y esto significa que cada usuario\n"
-"puede tener sus preferencias propias, sus archivos propios, y asĂ­\n"
-"sucesivamente. Puede leer la \"GuĂ­a de Comienzo\" para aprender mĂĄs. Pero,\n"
-"a diferencia de \"root\", que es el administrador del sistema, los usuarios\n"
-"que agregue en este punto no estarĂĄn autorizados a cambiar nada excepto su\n"
-"configuraciĂłn y sus archivos propios, protegiendo al sistema contra cambios\n"
-"no intencionales o maliciosos que pueden impactar al sistema como un todo.\n"
-"TendrĂĄ que crear al menos un usuario no privilegiado para Usted mismo - esa\n"
-"cuenta es la que deberĂ­a utilizar para el uso rutinario, diario. Aunque es\n"
-"muy pråctico ingresar como \"root\" para cualquier cosa y de todo, ¥también\n"
-"puede ser muy peligroso! Un error podrĂ­a significar que su sistema deje de\n"
-"funcionar. Si comete un error serio como usuario no privilegiado, sĂłlo\n"
-"puede llegar a perder algo de informaciĂłn, pero no afectar a todo el\n"
-"sistema.\n"
-"\n"
-"El primer campo le pide un nombre real. Por supuesto, esto no es\n"
-"obligatorio - en realidad, puede ingresar lo que desee. DrakX usarĂĄ la\n"
-"primer palabra que ingresĂł y la copiarĂĄ al campo \"Nombre de usuario\", que\n"
-"es el nombre que este usuario en particular usarĂĄ para ingresar al sistema.\n"
-"Si lo desea, puede omitir lo predeterminado y cambiar el nombre de usuario.\n"
-"El próximo paso es ingresar una contraseña. La contraseña de un usuario no\n"
-"privilegiado (regular) no es tan crucial como la de \"root\" desde el punto\n"
-"de vista de la seguridad, pero esto no es razĂłn alguna para obviarla o\n"
-"hacerla muy simple: después de todo, son sus archivos los que podrían estar\n"
-"en peligro.\n"
-"\n"
-"Una vez que hace clic sobre \"Aceptar usuario\", puede agregar otros\n"
-"usuarios. Agregue un usuario para cada uno de sus amigos: por ejemplo su\n"
-"padre o su hermana. Cuando haya terminado de agregar todos los usuarios que\n"
-"desee, haga clic sobre \"Siguiente ->\".\n"
-"\n"
-"Hacer clic sobre el botĂłn \"Avanzada\" le permite cambiar el \"shell\"\n"
-"predeterminado para ese usuario (bash, por defecto)\n"
-"\n"
-"Cuando haya finalizado de añadir todos los usuarios, se le propone elegir\n"
-"un usuario para conectarse automĂĄticamente en el sistema cuando arranca la\n"
-"computadora. Si estĂĄ interesado en esa caracterĂ­stica (y no le importa\n"
-"mucho la seguridad local), elija el usuario y administrador de ventanas\n"
-"deseado, luego haga clic sobre \"Siguiente ->\". Si no estĂĄ interesado en\n"
-"esta caracterĂ­stica, quite la marca de la casilla \"ÂżDesea utilizar esta\n"
-"caracterĂ­stica?\"."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
-msgstr ""
-"Antes de continuar, debería leer cuidadosamente los términos de la\n"
-"licencia. La misma cubre a toda la distribuciĂłn Mandrake Linux. Si acepta\n"
-"con todos los términos en la misma, marque la casilla \"Aceptar\". Si no,\n"
-"simplemente apague su computadora."
-
-#: ../../install2.pm:1
-#, c-format
-msgid "You must also format %s"
-msgstr "TĂș tambiĂ©n debes formatear %s"
-
-#: ../../install2.pm:1
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"No se puede acceder a los mĂłdulos del nĂșcleo correspondientes a su nĂșcleo "
-"(no se encuentra el archivo %s), esto generalmente significa que su disquete "
-"de arranque no contiene un nĂșcleo de misma versiĂłn que el soporte de "
-"instalaciĂłn (haga un nuevo disquete de arranque por favor)"
-
-#: ../../install_any.pm:1
-#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"OcurriĂł un error - no se encontrĂł ningĂșn dispositivo vĂĄlido para crear los "
-"nuevos sistemas de archivos. Por favor, verifique su equipo para saber la "
-"razĂłn de este fallo"
-
-#: ../../install_any.pm:1 ../../partition_table.pm:1
-#, c-format
-msgid "Error reading file %s"
-msgstr "Error al leer el archivo %s"
-
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Para utilizar esta selecciĂłn de paquetes salvada, arranque la instalaciĂłn "
-"con \"linux defcfg=floppy\""
+msgid "Wizard Configuration"
+msgstr "ConfiguraciĂłn del Asistente"
-#: ../../install_any.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "Este disquete no estĂĄ formateado con FAT"
+msgid "Autoprobe"
+msgstr "AutodetecciĂłn"
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Inserte un disquete formateado con FAT en la disquetera %s"
+msgid "Backup system files..."
+msgstr "Respaldar archivos del sistema..."
#: ../../install_any.pm:1
#, c-format
msgid "Can't use broadcast with no NIS domain"
msgstr "No se puede usar difusiĂłn sin un dominio NIS"
-#: ../../install_any.pm:1
-#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-"Se quitarĂĄn los paquetes siguientes para permitir actualizar su sistema: %s\n"
-"\n"
-"\n"
-"ÂżRealmente desea quitar estos paquetes?\n"
-
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No"
-msgstr "No"
+msgid "Removing printer \"%s\"..."
+msgstr "Quitando la impresora \"%s\" ..."
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Yes"
-msgstr "SĂ­"
+msgid "drakfloppy"
+msgstr "drakfloppy"
-#: ../../install_any.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
+"Please indicate where the auto_install.cfg file is located.\n"
"\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
-"Do you really want to install these servers?\n"
msgstr ""
-"Ha seleccionado el/los siguientes servidores: %s\n"
-"\n"
-"\n"
-"Estos servidores se activan por defecto. No se les conocen problemas de\n"
-"seguridad, pero se pueden encontrar problemas nuevos. En ese caso, debe "
-"asegurarse de\n"
-"actualizarlos tan pronto como sea posible.\n"
+"Por favor indique donde se encuentra el archivo auto_install.cfg.\n"
"\n"
+"DĂ©jelo en blanco si no desea configurar el modo de instalaciĂłn automĂĄtica.\n"
"\n"
-"ÂżRealmente desea instalar estos servidores?\n"
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System configuration"
-msgstr "ConfiguraciĂłn del sistema"
-
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System installation"
-msgstr "InstalaciĂłn del sistema"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Bringing down the network"
-msgstr "Bajando la red"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "information level that can be obtained through the cpuid instruction"
+msgstr ""
+"Nivel de informaciĂłn que se puede obtener por medio de la instrucciĂłn cpuid"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Bringing up the network"
-msgstr "Levantando la red"
+msgid "Peru"
+msgstr "PerĂș"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Partitioning failed: %s"
-msgstr "FallĂł el particionamiento: %s"
+msgid " on device: %s"
+msgstr " en el dispositivo: %s"
#: ../../install_interactive.pm:1
#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-"El asistente de particionamiento de DrakX encontrĂł las siguientes soluciones:"
+msgid "Remove Windows(TM)"
+msgstr "Quitar Windows(TM)"
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "I can't find any room for installing"
-msgstr "No se puede encontrar nada de espacio para instalar"
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr "Inicia el servidor de tipografĂ­as X11 (obligatorio para correr XFree)."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
msgstr ""
-"Ahora puede particionar %s.\n"
-"Cuando haya terminado, no se olvide de guardar usando 'w'"
+"La mayorĂ­a de estos valores se tomaron\n"
+"de su sistema actual.\n"
+"Los puede modificar si es necesario."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Use fdisk"
-msgstr "Usar fdisk"
+msgid "Select the font file or directory and click on 'Add'"
+msgstr ""
+"Seleccione el archivo o directorio de tipografĂ­as y haga clic sobre 'Agregar'"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Custom disk partitioning"
-msgstr "Particionamiento de disco personalizado"
+msgid "Madagascar"
+msgstr "Madagascar"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Se perderĂĄn TODAS las particiones y sus datos en la unidad %s"
+msgid "Urpmi"
+msgstr "Urpmi"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Tiene mĂĄs de un disco rĂ­gido, Âżsobre cuĂĄl desea instalar Linux?"
+msgid "Cron not available yet as non-root"
+msgstr "Cron todavĂ­a no estĂĄ disponible como no-root"
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Erase entire disk"
-msgstr "Borrar el disco entero"
+msgid "System"
+msgstr "Sistema"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Quitar Windows(TM)"
+msgid "Do you want to use this feature?"
+msgstr "ÂżDesea usar esta caracterĂ­stica?"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr ""
-"No hay particiones FAT para redimensionar (o no queda espacio suficiente)"
+msgid "Arabic"
+msgstr "ArĂĄbico"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"\n"
+"- Options:\n"
msgstr ""
-"Para asegurar la integridad de los datos luego de cambiar el tamaño a\n"
-"las particiones, se pueden ejecutar verificaciones de los sist. de archivos\n"
-"la prĂłxima vez que arranque en Windows(TM)"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FallĂł el redimensionado de la FAT: %s"
+"\n"
+"- Opciones:\n"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Resizing Windows partition"
-msgstr "Calculando los lĂ­mites del sistema de archivos Windows"
+msgid "Password required"
+msgstr "Se necesita contraseña"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Resizing"
-msgstr "Redimensionando"
+msgid "%d minutes"
+msgstr "%d minutos"
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "partition %s"
-msgstr "particiĂłn %s"
+msgid "Graphics card: %s"
+msgstr "Tarjeta grĂĄfica: %s"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "¿Qué tamaño desea conservar para Windows en la"
+msgid "WebDAV transfer failed!"
+msgstr "ÂĄFallĂł la transferencia WebDAV!"
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ÂĄADVERTENCIA!\n"
-"\n"
-"Ahora DrakX cambiarå el tamaño de su partición Windows. Proceda con "
-"cuidado:\n"
-"esta operaciĂłn es peligrosa. Si aĂșn no lo hizo, primero deberĂ­a salir de\n"
-"la instalaciĂłn, ejecutar scandisk bajo Windows (y opcionalmente ejecutar "
-"defrag),\n"
-"y luego volver a iniciar la instalación. También debería hacer una copia de\n"
-" seguridad de sus datos.\n"
-"Cuando esté seguro, pulse sobre Aceptar."
+msgid "XFree configuration"
+msgstr "ConfiguraciĂłn de XFree"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
-msgstr ""
-"Su particiĂłn Windows estĂĄ muy fragmentada, por favor primero ejecute \"defrag"
-"\""
+msgid "Choose action"
+msgstr "Elija una acciĂłn"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Calculando el espacio de la particiĂłn Windows"
+msgid "French Polynesia"
+msgstr "Polinesia Francesa"
-#: ../../install_interactive.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
msgstr ""
-"El redimensionador de tamaño de la FAT no puede gestionar su partición, \n"
-"ocurriĂł el error siguiente: %s"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "¿A qué partición desea cambiarle el tamaño?"
+"Por lo general, DrakX no tiene problemas en detectar la cantidad de botones\n"
+"que tiene su ratĂłn. En caso contrario, asume que Usted tiene un ratĂłn de\n"
+"dos botones y lo configurarĂĄ para que emule el tercer botĂłn. El tercer\n"
+"botĂłn del ratĂłn de un ratĂłn de dos botones se puede \"presionar\" haciendo\n"
+"clic simultĂĄneamente sobre el botĂłn izquierdo y el derecho. DrakX sabrĂĄ\n"
+"automĂĄticamente si su ratĂłn utiliza una interfaz PS/2, serie o USB.\n"
+"\n"
+"Si, por alguna razĂłn, desea especificar un tipo de ratĂłn diferente,\n"
+"selecciĂłnelo de la lista que se proporciona.\n"
+"\n"
+"Si elige un ratĂłn distinto al predeterminado, se le presentarĂĄ una pantalla\n"
+"de prueba. Use los botones y la rueda para verificar que la configuraciĂłn\n"
+"es correcta y que el ratĂłn estĂĄ funcionando correctamente. Si el ratĂłn no\n"
+"estĂĄ funcionando bien, presione la barra espaciadora o [Intro] para\n"
+"cancelar la prueba y volver a la lista de opciones.\n"
+"\n"
+"Los ratones con rueda a veces no se detectan automĂĄticamente por lo que\n"
+"deberĂĄ seleccionar su ratĂłn de una lista. Debe asegurarse de seleccionar el\n"
+"correspondiente al puerto en el cual estå conectado su ratón. Después de\n"
+"seleccionar un ratĂłn y presionar el botĂłn \"%s\", se muestra una imagen de\n"
+"un ratĂłn en la pantalla. Mueva la rueda de su ratĂłn para asegurarse que\n"
+"estĂĄ activa correctamente. Una vez que ve que se mueve la rueda en la\n"
+"pantalla a medida que mueve la rueda de su ratĂłn, pruebe los botones y\n"
+"verifique que el puntero del ratĂłn se mueve en la pantalla a medida que\n"
+"mueve su ratĂłn."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Usar el espacio libre de la particiĂłn Windows"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "Admitir las win-impresoras OKI 4w y compatibles."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
msgstr ""
-"No hay particiones FAT para usar como loopback (o no queda espacio "
-"suficiente)"
+"Lanzar el sistema de sonido ALSA (Arquitectura avanzada de sonido de Linux)"
-#: ../../install_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Tamaño de la partición de intercambio en MB: "
+msgid "Installing driver for %s card %s"
+msgstr "Instalando controlador para la tarjeta %s %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Root partition size in MB: "
-msgstr "Tamaño de la partición raíz en MB: "
+msgid ""
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
+msgstr ""
+"Ha transferido su impresora por defecto anterior (\"%s\"), ÂżDeberĂ­a ser "
+"también la impresora por defecto bajo el nuevo sistema de impresión %s?"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Choose the sizes"
-msgstr "Elija los tamaños"
+msgid "Enable Server"
+msgstr "Habiltar el Servidor"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "¿Qué partición desea usar para Linux4Win?"
+msgid "Ukrainian"
+msgstr "Ucraniano"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Usar la particiĂłn de Windows para loopback"
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
+msgstr ""
+"El acceso a la red no estaba corriendo y no se puede iniciar. Por favor, "
+"verifique su configuraciĂłn y su hardware. Luego, intente configurar su "
+"impresora remota de nuevo."
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "There is no existing partition to use"
-msgstr "No hay ninguna particiĂłn existente para usar"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "Por favor, inserte el disquete de arranque en la unidad %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use existing partitions"
-msgstr "Usar la particiĂłn existente"
+msgid "Local network(s)"
+msgstr "Red(es) local(es)"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "No hay espacio libre suficiente para asignar las particiones nuevas"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
+msgstr "Quitar Windows(TM)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Use free space"
-msgstr "Usar el espacio libre"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr ""
+"Su %s ha sido configurado.\n"
+"Ahora puede escanear documentos usando \"XSane\" desde Multimedios/GrĂĄficos "
+"en el menĂș de aplicaciones."
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Debe tener una particiĂłn FAT montada en /boot/efi"
+msgid "Firewire controllers"
+msgstr "Controladores Firewire"
-#: ../../install_interactive.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"You don't have a swap partition.\n"
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
"\n"
-"Continue anyway?"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
msgstr ""
-"No dispone de una particiĂłn de intercambio\n"
+"Luego que haya configurado los parĂĄmetros generales del cargador de\n"
+"arranque se mostrarĂĄ la lista de opciones de arranque que estarĂĄn\n"
+"disponibles al momento de arrancar.\n"
"\n"
-"ÂżDesea continuar de todas formas?"
+"Si hay otros sistemas operativos instalados en su mĂĄquina los mismos se\n"
+"agregarĂĄn automĂĄticamente al menĂș de arranque. AquĂ­ puede elegir ajustar\n"
+"las opciones existentes haciendo clic sobre \"%s\" para crear una nueva\n"
+"entrada; seleccionando una entrada y haciendo clic sobre \"%s\" o \"%s\"\n"
+"para modificarla o quitarla. \"%s\" valida sus cambios.\n"
+"\n"
+"También puede ser que no desee dar acceso a los otros sistemas operativos a\n"
+"cualquiera que vaya a la consola y reinicie la mĂĄquina. Puede borrar las\n"
+"entradas correspondientes para los sistemas operativos para quitarlas del\n"
+"menĂș, pero ÂĄnecesitarĂĄ un disquete de arranque para poder arrancar esos\n"
+"otros sistemas operativos!"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Debe tener una particiĂłn raĂ­z.\n"
-"Para ello, cree una particiĂłn (o haga clic sobre una que ya existe).\n"
-"Luego elija la acciĂłn \"Punto de montaje\" y defĂ­nalo como '/'"
+msgid "System mode"
+msgstr "Modo del sistema"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
msgstr ""
-"AlgĂșn hardware de su computadora necesita controladores \"propietarios\" "
-"para funcionar.\n"
-"Puede encontrar informaciĂłn sobre ellos en: %s"
+"Para imprimir en una impresora NetWare, es necesario escribir el nombre del "
+"servidor de impresiĂłn NetWare (ÂĄNote que puede no ser el mismo que el nombre "
+"de la mĂĄquina en TCP/IP) asĂ­ como el nombre de la cola de impresiĂłn que "
+"desea usar y el nombre de usuario y la contraseña apropiados."
-#: ../../install_messages.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Felicidades, la instalaciĂłn estĂĄ completa.\n"
-"Extraiga el soporte de arranque y presione Intro para reiniciar.\n"
-"\n"
-"Para obtener informaciĂłn sobre correcciones disponibles para esta versiĂłn\n"
-"de Mandrake Linux, consulte el archivo de erratas disponible en\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Hay informaciĂłn disponible sobre cĂłmo configurar su sistema en el capĂ­tulo "
-"de\n"
-"configuraciĂłn tras la instalaciĂłn de la guĂ­a de usuario oficial de Mandrake "
-"Linux."
+msgid "Netmask:"
+msgstr "MĂĄscara de red:"
-#: ../../install_messages.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr "http://www.mandrakelinux.com/en/91errata.php3"
+msgid "Append"
+msgstr "Añadir"
-#: ../../install_messages.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr ""
+"Refrescar la lista de impresoras (para visualizar todas las impresoras CUPS "
+"remotas)"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
msgstr ""
+"Cuando se activa esta opciĂłn, cada vez que se inicia CUPS se asegura de "
+"manera automĂĄtica que\n"
"\n"
-"Importante\n"
-"\n"
-"Haga el favor de leer cuidadosamente el presente documento. En caso de "
-"desacuerdo\n"
-"con el presente documento, no estĂĄ autorizado a instalar los demĂĄs\n"
-"CD. En este caso seleccione 'Rechazar' para seguir la instalaciĂłn sin\n"
-"estos CD.\n"
-"\n"
+"- si estĂĄ instalado LPD/LPRng, CUPS no sobreescribirĂĄ /etc/printcap\n"
"\n"
-"Algunos componentes de software contenidos en los siguientes CD no\n"
-"estĂĄn sometidos a las licencias GPL o similares que permitan la copia,\n"
-"adaptaciĂłn o redistribuciĂłn. Cada uno de los componentes de software\n"
-"esta distribuido bajo los términos y condiciones de un acuerdo de\n"
-"licencia propio. Por favor, diråjase a éste y acéptelo antes de instalarlo,\n"
-"usarlo o redistribuirlo. Generalmente, estas licencias no autorizan la\n"
-"copia (salvo las destinadas a copias de seguridad), la distribuciĂłn, "
-"descompilaciĂłn,\n"
-"desensamblado, ingenierĂ­a inversa, reconstituciĂłn de la lĂłgica del\n"
-"programa y/o modificaciĂłn, salvo en la medida y para las necesidades\n"
-"autorizadas por las leyes vigentes. Toda violaciĂłn de la licencia\n"
-"vigente implica generalmente la caducidad de estĂĄ, sin perjuicio a\n"
-"todos los demĂĄs derechos o acciones dirigidos en contra de Ud. Salvo si\n"
-"el acuerdo de licencia lo autoriza, no puede instalar estos programas\n"
-"en mĂĄs de una mĂĄquina, ni adaptarlos para un uso en red. Si fuese\n"
-"necesario, contacte con el distribuidor de cada programa para\n"
-"obtener licencias adicionales. La distribuciĂłn a terceros de copias de\n"
-"los programas o de la documentación que lo acompaña generalmente\n"
-"suele estar prohibida.\n"
+"- si falta /etc/cups/cupsd.conf, serĂĄ creado\n"
"\n"
+"- cuando la informaciĂłn de la impresora se difunde, no contiene \"localhost"
+"\" como nombre del servidor.\n"
"\n"
-"Todos los derechos, tĂ­tulos e intereses de esos programas son la\n"
-"propiedad exclusiva de sus autores respectivos y estĂĄn protegidos por el\n"
-"derecho de la propiedad intelectual y otras leyes aplicables al derecho\n"
-"del software.\n"
+"Si alguna de esas medidas lo pone en problemas, apague esta opciĂłn, pero "
+"entonces, tiene que ocuparse de estos puntos."
-#: ../../install_messages.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
-"5. Governing Laws \n"
+"It also provides a much higher API than OSS.\n"
"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
msgstr ""
-"EL PRESENTE TEXTO ES UNA TRADUCCIÓN A PROPÓSITO EXCLUSIVAMENTE\n"
-"INFORMATIVO DE LOS TÉRMINOS DE LA LICENCIA DE MANDRAKE LINUX. EN\n"
-"NINGÚN CASO LA PRESENTE TRADUCCIÓN TIENE VALOR LEGAL SIENDO OFICIAL\n"
-"EXCLUSIVAMENTE LA VERSIÓN EN FRANCÉS DE LA LICENCIA DE LINUX-MANDRAKE.\n"
-"No obstante, esperamos que esta traducciĂłn ayudarĂĄ a los que hablan\n"
-"castellano a entenderla mejor.\n"
-"\n"
-"\n"
-"IntroducciĂłn\n"
-"\n"
-"El conjunto de elementos que incluye el sistema operativo y los\n"
-"diferentes componentes disponibles en la distribuciĂłn Mandrake Linux\n"
-"se denominarĂĄn en adelante \"Programas\". Los programas incluyen en\n"
-"particular, pero de manera no limitativa, el conjunto de programas,\n"
-"procedimientos, reglas y documentaciones relativas al sistema\n"
-"operativo y a los diferentes componentes de la distribuciĂłn\n"
-"Mandrake Linux.\n"
-"\n"
-"\n"
-"1. Licencia\n"
-"\n"
-"Le rogamos leer cuidadosamente este documento. Éste constituye un\n"
-"contrato de licencia entre Ud. (persona fĂ­sica o persona moral) y\n"
-"MandrakeSoft S.A. aplicado a los programas. El hecho de instalar, \n"
-"duplicar o usar los programas de cualquier manera, indica\n"
-"que acepta explícitamente los términos y condiciones de esta licencia\n"
-"y que estå totalmente de acuerdo en lo referente a los términos de la "
-"misma.\n"
-"En caso de no estar de acuerdo con el presente documento, no estĂĄ\n"
-"autorizado a instalar, duplicar ni usar de ninguna manera\n"
-"este producto. El contrato de licencia sera automĂĄticamente anulado\n"
-"sin aviso previo en el caso que no se cumplan las disposiciones\n"
-"de este documento. En caso de anulaciĂłn Ud. tendrĂĄ que anular\n"
-"inmediatamente todo ejemplar y todas las copias de todos los programas\n"
-"y de todas las documentaciones que constituyen el sistema operativo y\n"
-"los diferentes componentes disponibles en en la distribuciĂłn\n"
-"Mandrake Linux.\n"
-"\n"
-"\n"
-"2. GarantĂ­a y limitaciones de garantĂ­a\n"
-"\n"
-"Los programas y la documentación que los acompaña son proporcionados\n"
-"tal cual y sin ninguna garantĂ­a. MandrakeSoft S.A.\n"
-"no se responsabiliza de las consecuencias de un daño directo,\n"
-"especial, indirecto o accesorio, de cualquiera naturaleza que sea, en\n"
-"relaciĂłn con la utilizaciĂłn de los programas, en particular y de\n"
-"manera no limitada, todos daños resultados por perdidas de\n"
-"beneficio, interrupción de actividad, pérdida de informaciones\n"
-"comerciales u otras perdidas financieras, asĂ­ que por eventuales\n"
-"condenaciones e indemnizaciones debidas como consecuencia de una decisiĂłn "
-"de\n"
-"la justicia, y eso incluso si MandrakeSoft S.A. hubiera sido informada de "
-"la\n"
-"aparición o eventualidad de tales daños.\n"
-"\n"
-"ADVERTENCIA EN CUANTO A LA POSESIÓN O USO DE PROGRAMAS PROHIBIDOS\n"
-"EN CIERTOS PAÍSES\n"
-"\n"
-"En ningĂșn caso, ni MandrakeSoft S.A. ni sus proveedores podrĂĄn ser\n"
-"responsabilizados por un perjuicio especial, directo, indirecto o\n"
-"accesorio, de cualquier naturaleza (en particular y de manera\n"
-"no limitada, pérdidas de beneficio, interrupción de actividad,\n"
-"pérdida de informaciones comerciales u otras pérdidas financieras, así\n"
-"como por posibles condenaciones e indemnizaciones debidas\n"
-"consecuentes a una decisiĂłn de justicia) que resultarĂ­a de la\n"
-"utilizaciĂłn, detenciĂłn o simple descarga desde uno de los sitios de\n"
-"transferencia de Mandrake Linux de programas prohibidos por la\n"
-"legislaciĂłn a la que estĂĄ sometido. Esta advertencia se aplica en\n"
-"particular a algunos componentes de criptografĂ­a fuerte incluĂ­dos en los\n"
-"programas.\n"
-"\n"
-"\n"
-"3. Licencia GPL y otras licencias\n"
-"\n"
-"Los Programas estĂĄn constituidos por mĂłdulos de programas creados por\n"
-"diversas personas (fĂ­sicas o legales). Muchos de ellos se\n"
-"distribuyen bajo los tĂ©rminos de la Licencia PĂșblica General GNU\n"
-"(denominada a partir de ahora \"GPL\") u otras licencias parecidas. La "
-"mayorĂ­a\n"
-"de estas licencias le permiten copiar, adaptar o redistribuir los\n"
-"mĂłdulos de los programas que cubren. Haga el favor de leer y de aceptar los "
-"términos y\n"
-"condiciones de las licencias que acompañan a cada uno de ellos antes de\n"
-"usarlos. Toda pregunta relativa a la licencia se debe dirigir al autor\n"
-"(o su representante) de dicho programa, y no a MandrakeSoft. Los\n"
-"programas desarrollados por MandrakeSoft estĂĄn sometidos a la licencia\n"
-"GPL. La documentaciĂłn escrita por MandrakeSoft esta sometida a una\n"
-"licencia especifica. Haga el favor de dirigirse a la documentaciĂłn para\n"
-"obtener mĂĄs informaciĂłn.\n"
-"\n"
-"\n"
-"4. Propiedad intelectual\n"
+"OSS (Open Sound System) fue el primer API de sonido. Es un API de sonido "
+"independiente del sistema operativo (estĂĄ disponible en la mayorĂ­a de los "
+"sistemas Unix) pero es un API muy bĂĄsico y limitado.\n"
+"Es mĂĄs, todos los controladores OSS reinventan la rueda.\n"
"\n"
-"Todos los derechos, tĂ­tulos e intereses de los diferentes programas\n"
-"son propiedad exclusiva de sus autores respectivos y estĂĄn protegidos\n"
-"por el derecho de la propiedad intelectual y otras leyes aplicadas a los\n"
-"derechos de los programas. Las marcas \"Mandrake\" y \"Mandrake Linux\" "
-"asĂ­\n"
-"como los logotipos asociados son registrados por MandrakeSoft S.A.\n"
+"ALSA (Advanced Linux Sound Architecture) es una arquitectura modular que\n"
+"soporta un amplio rango de tarjetas ISA, USB y PCI.\n"
"\n"
+"También brinda un API de mås alto nivel que OSS.\n"
"\n"
-"5. Disposiciones diversas\n"
-" \n"
-"Si alguna disposiciĂłn de este contrato de licencia fuera declarada\n"
-"nula, ilegal o inaplicable por un tribunal competente, esta\n"
-"disposiciĂłn serĂ­a excluida del presente contrato. Sin embargo\n"
-"Ud. seguirĂĄ sometido a las otras disposiciones, que tendrĂĄn\n"
-"plenos efectos. El contrato de licencia estĂĄ regido por las leyes\n"
-"francesas. Toda disputa relativa a los presentes términos serå\n"
-"resuelta, preferentemente, por vĂ­a amigable. En caso de desacuerdo con\n"
-"MandrakeSoft S.A., el litigio serĂĄ tramitado a los tribunales\n"
-"competentes de ParĂ­s, Francia. Para cualquier pregunta relacionada con\n"
-"este documento, por favor, pĂłngase en contacto con MandrakeSoft S.A.\n"
-
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Entrando en la etapa '%s'\n"
-
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Help"
-msgstr "Ayuda"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "not configured"
-msgstr "no configurada"
-
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
-#, c-format
-msgid "Configure"
-msgstr "Configurar"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Go on anyway?"
-msgstr "ÂżSeguir adelante?"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "Hubo un error al instalar los paquetes:"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Hubo un error al ordenar los paquetes:"
+"Para utilizar ALSA, uno puede utilizar:\n"
+"- el API antiguo de compatibilidad OSS\n"
+"- el API nuevo de ALSA que brinda muchas caracterĂ­sticas mejoradas pero "
+"necesita del uso de la bilbioteca ALSA.\n"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Change your Cd-Rom!\n"
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
+"You may prefer to replay the installation.\n"
msgstr ""
-"ÂĄCambie su CD-ROM!\n"
+"La instalaciĂłn automĂĄtica puede automatizarse por completo si lo desea,\n"
+"¥¥en ese caso se adueñarå del disco rígido!!\n"
+"(la intenciĂłn de esto es instalarlo en otro ordenador).\n"
"\n"
-"Inserte el CD-ROM etiquetado como \"%s\" en la unidad y pulse Aceptar cuando "
-"lo haya hecho.\n"
-"Si no lo posee, pulse Cancelar para cancelar la instalaciĂłn desde este CD-"
-"ROM."
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Refuse"
-msgstr "Rechazar"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Accept"
-msgstr "Aceptar"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Installing package %s"
-msgstr "Instalando el paquete %s"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "%d packages"
-msgstr "%d paquetes"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "No details"
-msgstr "Sin detalles"
+"Puede preferir reproducir la instalaciĂłn.\n"
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Details"
-msgstr "Detalles"
+msgid "Network printer \"%s\", port %s"
+msgstr "Impresora de red \"%s\", puerto %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Preparando la instalaciĂłn. Espere, por favor"
+msgid ""
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
+msgstr ""
+"Por favor, elija qué adaptador de red estarå conectado a su red de årea "
+"local."
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Time remaining "
-msgstr "Tiempo restante "
+msgid "OK to restore the other files."
+msgstr "Se pueden restaurar los otros archivos."
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Estimating"
-msgstr "Estimando"
+msgid "Please choose your keyboard layout."
+msgstr "Seleccione la distribuciĂłn de su teclado."
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Installing"
-msgstr "Instalando"
+msgid "Printer Device URI"
+msgstr "URI del dispositivo de impresiĂłn"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Elija los paquetes que desea instalar"
+msgid "Not erasable media!"
+msgstr "ÂĄNo es un soporte borrable!"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Minimal install"
-msgstr "InstalaciĂłn mĂ­nima"
+msgid "Terminal-based"
+msgstr "Por terminal"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Updating package selection"
-msgstr "Actualizando la selecciĂłn de paquetes"
+msgid "Installing a printing system in the %s security level"
+msgstr "Instalando un sistema de impresiĂłn en el nivel de seguridad %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Load/Save on floppy"
-msgstr "Cargar/Guardar en un disquete"
+msgid "The user name is too long"
+msgstr "El nombre de usuario es muy largo"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "<- Previous"
-msgstr "<- Anterior"
+msgid "Other OS (windows...)"
+msgstr "Otro SO (Windows...)"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Install"
-msgstr "Instalar"
+msgid "WebDAV remote site already in sync!"
+msgstr "ÂĄEl sitio WebDAV remoto ya estĂĄ sincronizado!"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Show automatically selected packages"
-msgstr "Mostrar los paquetes seleccionados automĂĄticamente"
+msgid "Reading printer database..."
+msgstr "Leyendo base de datos de impresoras ..."
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "No puede desmarcar este paquete. Debe ser actualizado"
+msgid "Generate auto install floppy"
+msgstr "Generar un disquete de instalaciĂłn automĂĄtica"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
msgstr ""
-"Se debe actualizar este paquete\n"
-"ÂżEstĂĄ seguro que quiere desmarcarlo?"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "No puede desmarcar este paquete. Ya estĂĄ instalado"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Este es un paquete obligatorio, no puede desmarcarlo"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't select/unselect this package"
-msgstr "No puede seleccionar/deseleccionar este paquete"
+"\t\t nombre de usuario: %s\n"
+"\t\t en ruta: %s \n"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The following packages are going to be removed"
-msgstr "Se van a quitar los siguientes paquetes"
+msgid "Somalia"
+msgstr "Somalia"
-#: ../../install_steps_gtk.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "The following packages are going to be installed"
-msgstr "Se van a instalar los siguientes paquetes"
+msgid "No open source driver"
+msgstr "No hay controlador open source"
-#: ../../install_steps_gtk.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"You can't select this package as there is not enough space left to install it"
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
msgstr ""
-"No puede seleccionar este paquete porque no hay espacio suficiente para "
-"instalarlo"
+"Basado en el nivel anterior, pero el sistema estĂĄ completamente cerrado.\n"
+"Las caracterĂ­sticas de seguridad estĂĄn al mĂĄximo."
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Importance: %s\n"
-msgstr "Importancia: %s\n"
+msgid "Nicaragua"
+msgstr "Nicaragua"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Size: %d KB\n"
-msgstr "Tamaño: %d KB\n"
+msgid "New Caledonia"
+msgstr "Nueva Caledonia"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Version: %s\n"
-msgstr "VersiĂłn: %s\n"
+msgid "European protocol (EDSS1)"
+msgstr "Protocolo europeo (EDSS1)"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Name: %s\n"
-msgstr "Nombre: %s\n"
+msgid "Video mode"
+msgstr "Modo de vĂ­deo"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bad package"
-msgstr "Paquete incorrecto"
+msgid "Please enter your email address below "
+msgstr "Por favor, ingrese su direcciĂłn de correo electrĂłnico debajo "
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other"
-msgstr "Otros"
+msgid "Oman"
+msgstr "OmĂĄn"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Tamaño total: %d / %d MB"
+msgid "Network Monitoring"
+msgstr "Monitoreo de la red"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Next ->"
-msgstr "Siguiente ->"
+msgid "SunOS"
+msgstr "SunOS"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Individual package selection"
-msgstr "SelecciĂłn de paquetes individuales"
+msgid "New size in MB: "
+msgstr "Tamaño nuevo en MB: "
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Package Group Selection"
-msgstr "SelecciĂłn de grupos de paquetes"
+msgid "Partition table type: %s\n"
+msgstr "Tipo de la tabla de particiones: %s\n"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Su sistema tiene pocos recursos. Puede tener algĂșn problema instalando\n"
-"Mandrake Linux. Si eso ocurre, puede intentar una instalaciĂłn tipo texto.\n"
-"Para ello, presione 'F1' cuando arranque desde el CDROM, e introduzca 'text'."
+msgid "Authentication Windows Domain"
+msgstr "Dominio de AutenticaciĂłn de Windows"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Save packages selection"
-msgstr "Guardar la selecciĂłn de paquetes"
+msgid "US keyboard"
+msgstr "Estadounidense"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Automated"
-msgstr "Automatizada"
+msgid "Buttons emulation"
+msgstr "EmulaciĂłn de los botones"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Replay"
-msgstr "Reproducir"
+msgid ", network printer \"%s\", port %s"
+msgstr ", impresora de red \"%s\", puerto %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
"\n"
-"You may prefer to replay the installation.\n"
+"Drakbackup activities via tape:\n"
+"\n"
msgstr ""
-"La instalaciĂłn automĂĄtica puede automatizarse por completo si lo desea,\n"
-"¥¥en ese caso se adueñarå del disco rígido!!\n"
-"(la intenciĂłn de esto es instalarlo en otro ordenador).\n"
"\n"
-"Puede preferir reproducir la instalaciĂłn.\n"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Generate auto install floppy"
-msgstr "Generar un disquete de instalaciĂłn automĂĄtica"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Reboot"
-msgstr "Reiniciar"
+"Actividades de Drakbackup por medio de cinta:\n"
+"\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Some steps are not completed.\n"
"\n"
-"Do you really want to quit now?"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
msgstr ""
-"Algunas de las etapas no fueron completadas.\n"
"\n"
-"ÂżRealmente desea salir ahora?"
+" Problema en la conexiĂłn FTP: No fue posible enviar sus archivos de copia de "
+"respaldo por FTP.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Creating auto install floppy..."
-msgstr "Creando el disquete de instalaciĂłn automĂĄtica"
+msgid "Sending Speed:"
+msgstr "Velocidad de envĂ­o:"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Inserte un disquete en blanco en la unidad %s"
+msgid "Halt bug"
+msgstr "Bug de Halt"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Puede necesitar cambiar el dispositivo de arranque de Open Firmware para\n"
-" activar el cargador de arranque. Si no ve el prompt del cargador de\n"
-" arranque al reiniciar, mantenga presionado Command-Option-O-F al\n"
-" reiniciar e introduzca:\n"
-" setenv boot-device %s, \\\\:tbxi\n"
-" Luego escriba: shut-down\n"
-"La prĂłxima vez que arranque deberĂ­a ver el prompt del cargador de arranque."
+msgid "Mail alert configuration"
+msgstr "ConfiguraciĂłn de alerta por correo"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"FallĂł la instalaciĂłn del cargador de arranque. OcurriĂł el siguiente error:"
+msgid "Tokelau"
+msgstr "Tokelau"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Installing bootloader"
-msgstr "Instalando cargador de arranque"
+msgid "Bosnian"
+msgstr "Bosnio"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"OcurriĂł un error al instalar aboot, \n"
-"Âżdesea forzar la instalaciĂłn incluso si ello implicara la destrucciĂłn de la "
-"primera particiĂłn?"
+msgid "Release: "
+msgstr "VersiĂłn:"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Do you want to use aboot?"
-msgstr "ÂżDesea usar aboot?"
+msgid "Connection speed"
+msgstr "Velocidad de la conexiĂłn"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
msgstr ""
-"Parece que tiene una mĂĄquina desconocida o una OldWorld,\n"
-"El gestor de arranque yaboot no funcionarĂĄ en la misma.\n"
-"La instalaciĂłn continuarĂĄ, pero necesitarĂĄ\n"
-"utilizar BootX o alguna otra manera para arrancar su mĂĄquina"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Preparing bootloader..."
-msgstr "Preparando el cargador de arranque"
+"Por favor, ingrese el nombre del dispositivo de\n"
+" su grabadora de CD, ej: 0,1,0"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Domain Admin Password"
-msgstr "Contraseña del Administrador del Dominio"
+msgid "Namibia"
+msgstr "Namibia"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Domain Admin User Name"
-msgstr "Nombre de usuario del Administrador del Dominio"
+msgid "Database Server"
+msgstr "Servidor de base de datos"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Windows Domain"
-msgstr "Dominio Windows"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr ""
+"capacidades especiales del controlador (posibilidad de grabar y/o soporte de "
+"DVD)"
-#: ../../install_steps_interactive.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Authentication Windows Domain"
-msgstr "Dominio de AutenticaciĂłn de Windows"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "No se puede añadir una partición al RAID md%d _ya formateado_"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"Para que esto funcione con un PDC de W2K, probablemente necesite que el "
-"administrador ejecute: C:\\>net localgroup \"Pre-Windows 2000 Compatible "
-"Access\" everyone /add y vuelva a iniciar el servidor.\n"
-"También necesitarå el nombre de usuario/contraseña de un Administrador de "
-"Dominio para unir la mĂĄquina al dominio Windows(TM).\n"
-"Si todavĂ­a no estĂĄ habilitada la red, DrakX intentarĂĄ unirse al dominio "
-"luego de la etapa de configuraciĂłn de red.\n"
-"Si esta configuraciĂłn falla por algĂșn motivo y no funciona la autenticaciĂłn "
-"PDC, ejecute 'smbpasswd -j DOMINIO -U USUARIO%%CONTRASEÑA' utilizando su "
-"Dominio Windows(TM), y Nombre de usuario/Contraseña de Administrador, luego "
-"del arranque del sistema.\n"
-"El comando 'wbinfo -t' probarĂĄ si sus secretos de autenticaciĂłn son buenos."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Server"
-msgstr "Servidor NIS"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Domain"
-msgstr "Dominio NIS"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Authentication NIS"
-msgstr "AutentificaciĂłn NIS"
+"Su tarjeta sĂłlo puede admitir aceleraciĂłn de 3D por hardware con XFree %s,\n"
+"ADVIERTA QUE ESTO ES EXPERIMENTAL Y PUEDE COLGAR SU ORDENADOR.\n"
+"XFree %s admite su tarjeta y puede tener un mejor comportamiento en 2D."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "NIS"
-msgstr "NIS"
+msgid "Please wait, setting security options..."
+msgstr "Por favor espere, configurando las opciones de seguridad..."
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "LDAP Server"
-msgstr "Servidor LDAP"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr "Desconocido|CPH05X (bt878) [muchos fabricantes]"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
+msgid "Launch the graphical environment when your system starts"
+msgstr "Lanzar el sistema X-Window al comenzar"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Authentication LDAP"
-msgstr "AutentificaciĂłn LDAP"
+msgid "hourly"
+msgstr "cada hora"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LDAP"
-msgstr "LDAP"
+msgid " Successfuly Restored on %s "
+msgstr " Recuperados satisfactoriamente en %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Local files"
-msgstr "Archivos locales"
+msgid "Making printer port available for CUPS..."
+msgstr "Haciendo que el puerto de la impresora esté disponible para CUPS..."
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Authentication"
-msgstr "AutentificaciĂłn"
+msgid "Antigua and Barbuda"
+msgstr "Antigua y Barbuda"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
+msgid ""
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""
-"Esta contraseña es demasiado simple\n"
-"(tiene que tener por lo menos una longitud de %d caracteres)"
-
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "No password"
-msgstr "Sin contraseña"
+"!!! Indica que la contraseña en la base de datos del sistema es diferente\n"
+"de la de la base de datos del Servidor de Terminales.\n"
+"Quite/agregue el usuario al Servidor de Terminales para permitir conexiĂłn."
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Set root password"
-msgstr "Contraseña de root"
+msgid "Spanish"
+msgstr "Español"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr "No ha configurado a X ÂżEstĂĄ seguro que realmente desea esto?"
+msgid "Start"
+msgstr "Iniciar"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Servicios: %d activados de %d registrados"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
+msgstr ""
+"Argumentos: (arg)\n"
+"\n"
+"Activar/desactivar verificaciones de promiscuidad de tarjetas Ethernet."
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Services"
-msgstr "Servicios"
+msgid "Configuring applications..."
+msgstr "Configurando las aplicaciones..."
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "System"
-msgstr "Sistema"
+msgid "Normal modem connection"
+msgstr "ConexiĂłn normal por mĂłdem"
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "%s on %s"
-msgstr "%s en %s"
+msgid "File Selection"
+msgstr "SelecciĂłn de archivos."
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Bootloader"
-msgstr "Cargador de arranque"
+msgid ""
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+" tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+" standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
+msgstr ""
+"¿Qué configuración de RDSI prefiere?\n"
+"\n"
+"* La configuraciĂłn antigua utiliza isdn4net. Tiene herramientas\n"
+" poderosas, pero es algo complicada de configurar para un recién \n"
+" llegado, y no es estĂĄndar.\n"
+"* La configuraciĂłn nueva es mĂĄs fĂĄcil de entender, mĂĄs estĂĄndar,\n"
+" pero con menos herramientas.\n"
+"\n"
+"Le recomendamos la configuraciĂłn ligera (esto es, la nueva).\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
-msgid "Boot"
-msgstr "Arranque"
+msgid "CUPS"
+msgstr "CUPS"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "disabled"
-msgstr "deshabilitado"
+msgid "Run config tool"
+msgstr "Ejecutar herramienta de configuraciĂłn"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "activated"
-msgstr "activado"
+msgid "Bootloader installation"
+msgstr "InstalaciĂłn del cargador de arranque"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Firewall"
-msgstr "Cortafuegos"
+msgid "Root partition size in MB: "
+msgstr "Tamaño de la partición raíz en MB: "
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Security"
-msgstr "Seguridad"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "Este es un paquete obligatorio, no puede desmarcarlo"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Security Level"
-msgstr "Nivel de seguridad"
+msgid "Etherboot ISO image is %s"
+msgstr "La imagen ISO Etherboot es %s"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Network"
-msgstr "Red"
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"named (BIND) es un servidor de nombres de dominio (DNS) usado para convertir "
+"los nombres de mĂĄquinas en direcciones IP."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Network & Internet"
-msgstr "Redes e Internet"
+msgid "Disconnect..."
+msgstr "Desconectar..."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Graphical interface"
-msgstr "Interfaz grĂĄfica"
+msgid "Saint Lucia"
+msgstr "Santa LucĂ­a"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Hardware"
-msgstr "Hardware"
+msgid "Report"
+msgstr "Reporte"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "TV card"
-msgstr "Tarjeta de TV"
+msgid "Palau"
+msgstr "Palau"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"No se detectĂł tarjeta de sonido. Pruebe \"harddrake\" luego de la instalaciĂłn"
+msgid "level"
+msgstr "nivel"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
msgstr ""
-"Use \"sndconfig\" luego de la instalaciĂłn para configurar su tarjeta de "
-"sonido"
+"Todos los incidentes estarĂĄn seguidos por un Ășnico experto tĂ©cnico "
+"calificado de MandrakeSoft."
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "ÂżTiene una tarjeta de sonido ISA?"
+msgid "Package Group Selection"
+msgstr "SelecciĂłn de grupos de paquetes"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sound card"
-msgstr "Tarjeta de sonido"
+msgid "Restore Via Network Protocol: %s"
+msgstr "Restaurar por medio del protocolo de red: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Remote CUPS server"
-msgstr "Servidor CUPS remoto"
+msgid "You can configure each parameter of the module here."
+msgstr "AquĂ­ puede configurar cada parĂĄmetro del mĂłdulo."
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "No printer"
-msgstr "Sin impresora"
+msgid "Choose the resolution and the color depth"
+msgstr "Elija la resoluciĂłn y la profundidad de colores"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Printer"
-msgstr "Impresora"
+msgid "Emulate third button?"
+msgstr "ÂżEmular el tercer botĂłn?"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mouse"
-msgstr "RatĂłn"
+msgid ""
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
+msgstr ""
+"No puede crear una particiĂłn nueva\n"
+"(debido a que alcanzĂł la cantidad mĂĄxima de particiones primarias).\n"
+"Primero debe quitar una particiĂłn primaria y crear una particiĂłn extendida."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Timezone"
-msgstr "Huso horario"
+msgid "Mount"
+msgstr "Montar"
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Keyboard"
-msgstr "Teclado"
+msgid "Creating auto install floppy"
+msgstr "Creando el disquete de instalaciĂłn automĂĄtica"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Summary"
-msgstr "Resumen"
+msgid "Install updates"
+msgstr "Instalar actualizaciones"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "NTP Server"
-msgstr "Servidor NTP"
+msgid "text box height"
+msgstr "altura del cuadro de texto"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "SincronizaciĂłn automĂĄtica de hora (usando NTP)"
+msgid "State"
+msgstr "Estado"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Reloj interno puesto a GMT"
+msgid "Be sure a media is present for the device %s"
+msgstr "AsegĂșrese que hay un soporte para el dispositivo %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which is your timezone?"
-msgstr "ÂżCuĂĄl es su huso horario?"
+msgid "Enable multiple profiles"
+msgstr "Activar perfiles mĂșltiples"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Would you like to try again?"
-msgstr "ÂżDesea intentar nuevamente?"
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
+msgstr ""
+"Estas opciones pueden respaldar y restaurar todos los archivos en el "
+"directorio /etc.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Unable to contact mirror %s"
-msgstr "No se puede contactar al sitio de réplica %s"
+msgid "Local printer"
+msgstr "Impresora local"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr ""
-"Contactando con el sitio de réplica para obtener la lista de los paquetes "
-"disponibles..."
+msgid "Files Restored..."
+msgstr "Archivos restaurados..."
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Elija un sitio de réplica del cual obtener los paquetes"
+msgid "Package selection"
+msgstr "SelecciĂłn de paquetes"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr ""
-"Contactando con el sitio web de Mandrake Linux para obtener la lista de las "
-"réplicas disponibles"
+msgid "Mauritania"
+msgstr "Mauritania"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
"\n"
-"Do you want to install the updates ?"
msgstr ""
-"Ahora tiene la oportunidad de bajar paquetes actualizados. Estos paquetes\n"
-"se han actualizad después de que se publicó la distribución. Puede que los\n"
-"mismos contengan correcciones de bugs o de seguridad.\n"
+"Puedo mantener su configuraciĂłn corriente y asumir que ya configurĂł un "
+"servidor DHCP; en ese caso, por favor verifique que leo correctamente la Red "
+"que usó para su red local; no la volveré a configurar y no tocaré la "
+"configuraciĂłn de su servidor DHCP.\n"
"\n"
-"Para descargar estos paquetes, necesitarĂĄ tener una conexiĂłn con la\n"
-"Internet que esté funcionando.\n"
+"La entrada DNS predeterminada es el Servidor de nombres de caché configurado "
+"en el cortafuegos. Lo puede reemplazar, por ej., con la IP del DNS de su "
+"ISP.\n"
+"\n"
+"De lo contrario, puedo volver a configurar su interfaz y (volver a) "
+"configurar un servidor DHCP por Usted.\n"
"\n"
-"ÂżDesea instalar las actualizaciones?"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Por favor, inserte el disquete de mĂłdulos actualizados en la unidad %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Por favor, inserte el disquete de arranque en la unidad %s"
+msgid ""
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
+msgstr ""
+"No se encontrĂł ninguna impresora local. Para instalar una manualmente, "
+"introduzca un nombre de dispositivo/nombre de archivo en la lĂ­nea de entrada "
+"(Puertos paralelos: /dev/lp0, /dev/lp1, ..., equivalen a LPT1:, LPT2, ..., "
+"1ÂȘ impresora USB: /dev/usb/lp0, 2ÂȘ impresora USB: /dev/usb/lp1, ...)."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Post-install configuration"
-msgstr "ConfiguraciĂłn posterior a la instalaciĂłn"
+msgid "All primary partitions are used"
+msgstr "Todas las particiones primarias estĂĄn usadas"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Installing package %s\n"
-"%d%%"
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
msgstr ""
-"Instalando el paquete %s\n"
-"%d%%"
+"Después de esto, se recomienda que reinicie su entorno X\n"
+"para evitar el problema del cambio del nombre de la mĂĄquina."
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Preparing installation"
-msgstr "Preparando la instalaciĂłn"
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr "DetecciĂłn y configuraciĂłn automĂĄtica del hardware al arrancar."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM etiquetado como \"%s\""
+msgid "Installation Server Configuration"
+msgstr "ConfiguraciĂłn del servidor de instalaciĂłn"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Si tiene todos los CD de la lista siguiente, haga clic sobre \"Aceptar\".\n"
-"Si no tiene ningĂșn CD, haga clic sobre \"Cancelar\".\n"
-"Si sĂłlo le faltan algunos CD, desmĂĄrquelos y haga clic sobre \"Aceptar\"."
+msgid "Configuring IDE"
+msgstr "Configurando dispositivos IDE"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "All"
-msgstr "Todo"
+msgid "Network functionality not configured"
+msgstr "Funcionalidad de red no configurada"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "InstalaciĂłn mĂ­nima \"en serio\" (especialmente sin urpmi)"
+msgid "Configure module"
+msgstr "Configurar mĂłdulo"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Con documentaciĂłn bĂĄsica (ÂĄrecomendado!)"
+msgid "Cocos (Keeling) Islands"
+msgstr "Islas Cocos (Keeling)"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "With X"
-msgstr "Con X"
+msgid "Disconnecting from the Internet "
+msgstr "Desconectando desde la Internet "
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"No ha seleccionado ningĂșn grupo de paquetes\n"
-"Elija por favor la mĂ­nima instalaciĂłn que quiera."
+msgid "You'll need to reboot before the modification can take place"
+msgstr "Necesita reiniciar el equipo para que la modificaciĂłn tenga efecto"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Type of install"
-msgstr "Tipo de instalaciĂłn."
+msgid "Provider phone number"
+msgstr "NĂșmero de telĂ©fono del proveedor"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Selected size is larger than available space"
-msgstr "El tamaño seleccionado es mayor que el disponible"
+msgid "Host %s"
+msgstr "Host %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "Introduzca un disquete que contenga la selecciĂłn de paquetes"
+msgid "Armenia"
+msgstr "Armenia"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Loading from floppy"
-msgstr "Cargando desde un disquete"
+msgid "Fiji"
+msgstr "Fidji"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Package selection"
-msgstr "SelecciĂłn de paquetes"
+msgid ""
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
+msgstr ""
+"Argumentos: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Configurar la longitud mínima de contraseña y la cantidad mínima de dígitos "
+"y cantidad mĂ­nima de letras mayĂșsculas."
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Save on floppy"
-msgstr "Guardar en un disquete"
+msgid "Second floppy drive"
+msgstr "Segunda disquetera"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Load from floppy"
-msgstr "Cargar desde un disquete"
+msgid "About Harddrake"
+msgstr "Acerca de Harddrake"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Por favor, seleccione cargar o guardar la selecciĂłn de paquetes en "
-"disquete.\n"
-"El formato es el mismo que los disquetes generados para la instalaciĂłn "
-"automĂĄtica."
+msgid "Drive capacity"
+msgstr "Capacidad de la unidad"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
msgstr ""
-"Su sistema no tiene espacio suficiente para instalar o actualizar (%d > %d)"
+"Inserte un disquete en la unidad\n"
+"Se perderĂĄn todos los datos del disquete"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Looking for available packages..."
-msgstr "Buscando los paquetes disponibles..."
+msgid "Size: %s"
+msgstr "Tamaño: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Encontrando los paquetes a actualizar..."
+msgid "Control and Shift keys simultaneously"
+msgstr "Las teclas Control y Shift simultĂĄneamente"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Looking at packages already installed..."
-msgstr "Buscando paquetes ya instalados..."
+msgid "secondary"
+msgstr "secundario"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr ""
-"Buscando los paquetes disponibles y reconstruyendo la base de datos de RPM..."
+msgid "View Backup Configuration."
+msgstr "Ver configuraciĂłn del respaldo"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr ""
-"Espacio de intercambio insuficiente para completar la instalación, añada un "
-"poco mĂĄs"
+msgid "if set to yes, report check result to syslog."
+msgstr "si se pone en sĂ­, reportar resultado de verificaciĂłn en syslog."
-#: ../../install_steps_interactive.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
-msgstr ""
-"FallĂł la verificaciĂłn del sistema de archivos %s. ÂżDesea reparar los "
-"errores? (cuidado, puede perder datos)"
+msgid "No password"
+msgstr "Sin contraseña"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Check bad blocks?"
-msgstr "ÂżVerificar el disco en busca de bloques malos?"
+msgid "Nigeria"
+msgstr "Nigeria"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Elija las particiones que desea formatear"
+msgid "There is no existing partition to use"
+msgstr "No hay ninguna particiĂłn existente para usar"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
msgstr ""
-"Necesita reiniciar el equipo para que se efectĂșe la modificaciĂłn de la tabla "
-"de particiones"
+"Los siguiente escĂĄneres\n"
+"\n"
+"%s\n"
+"estĂĄn disponibles en su sistema.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
msgstr ""
-"ÂĄNo hay 1MB de espacio para bootstrap! La instalaciĂłn continuarĂĄ, pero para "
-"arrancar su sistema, necesitarĂĄ crear la particiĂłn bootstrap en DiskDrake"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Choose the mount points"
-msgstr "Seleccione los puntos de montaje"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Rastreando las particiones para encontrar los puntos de montaje"
+"Para imprimir en una impresora por socket o TCP, necesita proporcionar el "
+"nombre de host o direcciĂłn IP de la impresora y, opcionalmente, el nĂșmero de "
+"puerto (9100, por defecto). En servidores HP JetDirect el nĂșmero de puerto "
+"por lo general es 9100, en otros servidores puede variar. Consulte el manual "
+"de su hardware."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No partition available"
-msgstr "no hay particiones disponibles"
+msgid "Hard drive information"
+msgstr "InformaciĂłn del disco rĂ­gido"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configuring IDE"
-msgstr "Configurando dispositivos IDE"
+msgid "Russian"
+msgstr "Ruso"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "IDE"
-msgstr "IDE"
+msgid "Jordan"
+msgstr "Jordania"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "Configurando tarjetas PCMCIA..."
+msgid "Hide files"
+msgstr "Ocultar archivos"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid "Auto-detect printers connected to this machine"
+msgstr "Detectar automĂĄticamente las impresoras conectadas a esta mĂĄquina"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Button 3 Emulation"
-msgstr "EmulaciĂłn del botĂłn 3"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgstr ""
+"ÂĄXawTV no estĂĄ instalado!\n"
+"\n"
+"\n"
+"Si tiene una tarjeta de TV pero DrakX no la detectĂł (\"/etc/modules\" no\n"
+"tiene el mĂłdulo bttv ni saa7134) ni instalĂł xawtv, por favor envĂ­e\n"
+"el resultado de \"lspcidrake -v -f\" a \"install@mandrakesoft.com\" con\n"
+"el tema \"undetected TV card\".\n"
+"\n"
+"Lo puede instalar tecleando \"urpmi xawtv\", como root, en la consola."
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Button 2 Emulation"
-msgstr "EmulaciĂłn del botĂłn 2"
+msgid "Sorry, no floppy drive available"
+msgstr "Disculpe, pero no hay ninguna disquetera disponible"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Buttons emulation"
-msgstr "EmulaciĂłn de los botones"
+msgid "Bolivia"
+msgstr "Bolivia"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Seleccione el puerto serie al que estĂĄ conectado el ratĂłn, por favor."
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
+"Configure a su servidor Windows para que la impresión esté disponible bajo "
+"el protocolo IPP y configure la impresiĂłn desde esta mĂĄquina bajo el tipo de "
+"conexiĂłn \"%s\" en PrinterDrake.\n"
+"\n"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Mouse Port"
-msgstr "Puerto del ratĂłn"
+msgid "Bad package"
+msgstr "Paquete incorrecto"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Please choose your type of mouse."
-msgstr "Por favor, seleccione el tipo de su ratĂłn."
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
+"Transforme su mĂĄquina en un servidor Linux potente con unos pocos clic del "
+"ratĂłn: servidor web, de correo, cortafuegos, router, servidor de archivos e "
+"impresoras, ..."
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Encryption key for %s"
-msgstr "Clave de cifrado para %s"
+msgid "DrakSec Basic Options"
+msgstr "Opciones bĂĄsicas de DrakSec"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Upgrade %s"
-msgstr "Actualizar %s"
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program. Just type \"sndconfig\" in a console."
+msgstr ""
+"\n"
+"\n"
+"\n"
+"Nota: si tiene una tarjeta de sonido ISA PnP, tendrĂĄ que utilizar el "
+"programa sndconfig. Simplemente teclee \"sndconfig\" en una consola."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "ÂżEs una instalaciĂłn o una actualizaciĂłn?"
+msgid "Romania"
+msgstr "RumanĂ­a"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Install/Upgrade"
-msgstr "InstalaciĂłn/ActualizaciĂłn"
+msgid "choose device"
+msgstr "elija el dispositivo"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "AquĂ­ tiene la lista completa de teclados disponibles"
+msgid "Canada"
+msgstr "CanadĂĄ"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Seleccione la distribuciĂłn de su teclado."
+msgid "Remove from LVM"
+msgstr "Quitar del LVM"
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Quit"
-msgstr "Salir"
+msgid "Timezone"
+msgstr "Huso horario"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "License agreement"
-msgstr "Acuerdo de licencia"
+msgid "German"
+msgstr "AlemĂĄn"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "An error occurred"
-msgstr "OcurriĂł un error"
+msgid "Next ->"
+msgstr "Siguiente ->"
-#: ../../install_steps_newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
msgstr ""
-" <Tab>/<Alt-Tab> entre elementos | <espacio> selecciona | <F12> pantalla "
-"sig. "
+"Habilitar esto le permite imprimir archivos de texto plano en idioma "
+"japonés. Sólo use esta función y realmente desea imprimir texto en japonés, "
+"si se activa Usted no puede imprimir mĂĄs caracteres acentuados en "
+"tipografías latinas y no podrå ajustar los mårgenes, el tamaño de letra, "
+"etc. Este ajuste sĂłlo afecta a las impresoras definidas en esta mĂĄquina. Si "
+"desea imprimir texto en una impresora ubicada en un mĂĄquina remota, debe "
+"activar esta funciĂłn en dicha mĂĄquina remota."
-#: ../../install_steps_newt.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "InstalaciĂłn %s de Mandrake Linux"
+msgid ""
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
+msgstr ""
+"\n"
+"Es probable que esta particiĂłn sea\n"
+"una particiĂłn de Controlador, probablemente\n"
+"deberĂ­a dejarla como estĂĄ.\n"
-#: ../../install_steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No floppy drive available"
-msgstr "Ninguna disquetera disponible"
+msgid "Guinea-Bissau"
+msgstr "Guinea-Bissau"
-#: ../../install_steps.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Welcome to %s"
-msgstr "Bienvenido a %s"
+msgid "Horizontal refresh rate"
+msgstr "Frecuencia de barrido horizontal"
-#: ../../install_steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
msgstr ""
-"Algunos paquetes importantes no fueron instalados correctamente.\n"
-"Seguramente su lector de CD o su CD de instalaciĂłn sean defectuosos.\n"
-"Compruebe el CD de instalaciĂłn en un sistema ya existente con el comando:\n"
-" rpm -qpl Mandrake/RPMS/*.rpm\n"
-
-#: ../../install_steps.pm:1
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Punto de montaje %s duplicado"
+"No se puede deseleccionar el punto de montaje ya que esta particiĂłn\n"
+"se usa para un montaje en loopback.\n"
+"Quite el montaje de loopback primero"
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
msgstr ""
-"OcurriĂł un error y no se puede gestionar de forma adecuada.\n"
-"ContinĂșe bajo su propio riesgo."
-
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Please wait"
-msgstr "Espere, por favor"
-
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
-#, c-format
-msgid "Ok"
-msgstr "Aceptar"
-
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
-#, c-format
-msgid "Finish"
-msgstr "Finalizar"
-
-#: ../../interactive.pm:1 ../../standalone/draksec:1
-#, c-format
-msgid "Basic"
-msgstr "BĂĄsico"
+"La configuraciĂłn de la red hecha durante la instalaciĂłn no se puede iniciar "
+"ahora. Por favor, verifique si la red se hace accesible tras reiniciar su "
+"sistema y corrija la configuraciĂłn usando el Centro de control de Mandrake, "
+"secciĂłn \"Redes e Internet\"/\"ConexiĂłn\", y tras esto configure la "
+"impresora, también utilizando el Centro de Control de Mandrake, sección "
+"\"Hardware\"/\"Impresora\"."
-#: ../../interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Advanced"
-msgstr "Avanzada"
+msgid "USB controllers"
+msgstr "Controladores USB"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Remove"
-msgstr "Quitar"
+msgid "What norm is your TV using?"
+msgstr "¿Qué norma estå utilizando su TV?"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Modify"
-msgstr "Modificar"
+msgid "Type:"
+msgstr "Tipo:"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Add"
-msgstr "Agregar"
+msgid "Share name"
+msgstr "Nombre del recurso compartido"
-#: ../../interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Choose a file"
-msgstr "Elija un archivo"
+msgid "enable"
+msgstr "activar"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
msgstr ""
-"AquĂ­ puede elegir la tecla o combinaciĂłn de teclas que permitirĂĄ\n"
-"cambiar entre los diferentes esquemas de teclado\n"
-"(ej.: latino y no latino)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "Tecla \"Windows\" de la derecha"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Left \"Windows\" key"
-msgstr "Tecla \"Windows\" de la izquierda"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "\"Menu\" key"
-msgstr "La tecla \"MenĂș\""
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Las teclas Alt y Shift simultĂĄneamente"
+"Contactando con el sitio web de Mandrake Linux para obtener la lista de las "
+"réplicas disponibles"
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Las teclas Ctrl y Alt simultĂĄneamente"
+msgid ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
+msgstr ""
+"OcurriĂł un problema mientras se reiniciaba la red: \n"
+"\n"
+"%s"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "CapsLock key"
-msgstr "Tecla CapsLock"
+msgid "Remove the loopback file?"
+msgstr "ÂżBorrar el archivo de loopback?"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Las teclas Control y Shift simultĂĄneamente"
+msgid "Selected size is larger than available space"
+msgstr "El tamaño seleccionado es mayor que el disponible"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "Ambas teclas Shift simultĂĄneamente"
+msgid "NCP server name missing!"
+msgstr "ÂĄNo se encuentra el nombre del servidor NCP!"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Right Alt key"
-msgstr "Tecla Alt derecha"
+msgid "Please choose your country."
+msgstr "Seleccione su paĂ­s, por favor."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Yugoslavian (latin)"
-msgstr "Yugoslavo (latĂ­n)"
+msgid "Hard Disk Backup files..."
+msgstr "Respaldar archivos del disco rĂ­gido..."
#: ../../keyboard.pm:1
#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamita \"numérico\" QWERTY"
+msgid "Laotian"
+msgstr "Laosiano"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "US keyboard (international)"
-msgstr "Estadounidense (internacional)"
+msgid "Samoa"
+msgstr "Samoa"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "US keyboard"
-msgstr "Estadounidense"
+msgid ""
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
+msgstr ""
+"El protocolo rstat permite a los usuarios de una red recoger\n"
+"informaciĂłn sobre el rendimiento de cualquier mĂĄquina de dicha red."
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "UK keyboard"
-msgstr "BritĂĄnico"
+msgid "Re-generating list of configured scanners ..."
+msgstr "Regenerando lista de escĂĄneres configurados ..."
-#: ../../keyboard.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Ukrainian"
-msgstr "Ucraniano"
+msgid "Scanner"
+msgstr "EscĂĄner."
-#: ../../keyboard.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turco (modelo \"Q\" moderno)"
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr "Advertencia: probar esta tarjeta de vĂ­deo puede colgar su computadora"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turco (modelo \"F\" tradicional)"
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr ""
+"El nombre de usuario (login) sĂłlo debe contener letras, nĂșmeros, `-' y `_'"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Tajik keyboard"
-msgstr "Teclado tajik"
+msgid "Menudrake"
+msgstr "Menudrake"
-#: ../../keyboard.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Thai keyboard"
-msgstr "Teclado tailandés"
+msgid "Welcome To Crackers"
+msgstr "Bienvenidos, crackers"
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "Tamil (disposiciĂłn de mĂĄquina de escribir)"
+msgid "Module options:"
+msgstr "Opciones de los mĂłdulos:"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr "Tamil (disposiciĂłn ISCII)"
+msgid "Secure your networks with the Multi Network Firewall"
+msgstr "Haga seguras sus redes con el Multi Network Firewall"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Serbian (cyrillic)"
-msgstr "Serbio (cirĂ­lico)"
+msgid "Go on without configuring the network"
+msgstr "Continuar sin configurar la red"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Eslovaco (QWERTY)"
+msgid "Abort"
+msgstr "Abortar"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Eslovaco (QWERTZ)"
+msgid "No password prompt on %s at port %s"
+msgstr "Sin pedido de contraseña en %s en el puerto %s"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Slovenian"
-msgstr "Esloveno"
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "Por favor, marque si desea utilizar un dispositivo que no rebobina."
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Swedish"
-msgstr "Sueco"
+msgid "Usage of remote scanners"
+msgstr "Uso de escĂĄneres remotos"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Russian (Yawerty)"
-msgstr "Ruso (Yawerty)"
+msgid "\t-CDROM.\n"
+msgstr "\t-CDROM.\n"
-#: ../../keyboard.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Russian"
-msgstr "Ruso"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
+msgstr ""
+"Su particiĂłn Windows estĂĄ muy fragmentada, por favor primero ejecute \"defrag"
+"\""
#: ../../keyboard.pm:1
#, c-format
-msgid "Romanian (qwerty)"
-msgstr "Rumano (qwerty)"
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak (Noruego)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Romanian (qwertz)"
-msgstr "Rumano (qwertz)"
+msgid "Hard Disk Backup Progress..."
+msgstr "Progreso de respaldo del disco rĂ­gido..."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Canadian (Quebec)"
-msgstr "Canadiense (Quebec)"
+msgid "Unable to fork: %s"
+msgstr "No se puede hacer fork: %s"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Portuguese"
-msgstr "Portugués"
+msgid "Type: "
+msgstr "Tipo: "
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Polaco (distribuciĂłn qwertz)"
+msgid "<-- Edit Client"
+msgstr "<-- Editar cliente"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Polaco (distribuciĂłn qwerty)"
+msgid "no fonts found"
+msgstr "no se encontraron tipografĂ­as"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Norwegian"
-msgstr "Noruego"
+msgid "Mouse"
+msgstr "RatĂłn"
-#: ../../keyboard.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Dutch"
-msgstr "Holandés"
+msgid "not enough room in /boot"
+msgstr "no hay espacio suficiente en /boot"
-#: ../../keyboard.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Maltese (US)"
-msgstr "Maltés (EE.UU.)"
+msgid "Choosing an arbitratry driver"
+msgstr "Eligiendo un controlador arbitrario"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Maltese (UK)"
-msgstr "Maltés (Reino Unido)"
+msgid "Host name"
+msgstr "Nombre de la mĂĄquina"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Mongol (cirĂ­lico)"
+msgid "Liechtenstein"
+msgstr "Liechtenstein"
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Myanmar (Burmese)"
-msgstr "Myanmar (Birmano)"
+msgid "the color of the progress bar"
+msgstr "el color de la barra de progreso"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Macedonian"
-msgstr "Macedonio"
+msgid "Suppress Fonts Files"
+msgstr "Suprimir archivos de tipografĂ­as"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Malayalam"
-msgstr "Malayo"
+msgid "Add to RAID"
+msgstr "Añadir al RAID"
-#: ../../keyboard.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Latvian"
-msgstr "LetĂłn"
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
+"Puede agregar entradas adicionales para Yaboot, ya sea para otros sistemas\n"
+"operativos, nĂșcleos alternativos, o para una imagen de arranque de\n"
+"emergencia.\n"
+"\n"
+"Para otros sistemas operativos, la entrada consiste sĂłlo de una etiqueta y\n"
+"la particiĂłn raĂ­z.\n"
+"\n"
+"Para Linux, hay algunas opciones posibles:\n"
+"\n"
+" * Etiqueta: esta es simplemente el nombre que deberĂĄ teclear en el prompt\n"
+"de yaboot para seleccionar esta opciĂłn de arranque.\n"
+"\n"
+" * Imagen: esta deberĂ­a ser el nombre del nĂșcleo a arrancar. TĂ­picamente,\n"
+"vmlinux o una variaciĂłn de vmlinux con una extensiĂłn.\n"
+"\n"
+" * RaĂ­z: el dispositivo \"root\" o \"/\" para su instalaciĂłn Linux.\n"
+"\n"
+" * Añadir: la opciĂłn de añadir al nĂșcleo se usa bastante sobre el hardware\n"
+"Apple para asistir en la inicializaciĂłn del hardware de vĂ­deo, o para\n"
+"habilitar la emulaciĂłn de los botones del ratĂłn con el teclado para los\n"
+"botones 2do y 3ro del ratĂłn que por lo general no tienen los ratones\n"
+"estĂĄndar de Apple. Algunos ejemplos son los siguientes:\n"
+"\n"
+" \tvideo=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" \tvideo=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: esta opciĂłn se puede usar o bien para cargar los mĂłdulos\n"
+"iniciales, antes que esté disponible el dispositivo de arranque, o bien\n"
+"cargar una imagen de ramdisk para una situaciĂłn de arranque de emergencia.\n"
+"\n"
+" * Tamaño de Initrd: generalmente el tamaño por defecto del ramdisk es 4096\n"
+"bytes. Puede usar esta opciĂłn si necesita asignar un ramdisk mayor.\n"
+"\n"
+" * Lectura-Escritura: normalmente la particiĂłn \"root\" se levanta en modo\n"
+"de sĂłlo lectura, para permitir una verificaciĂłn del sistema de archivos\n"
+"antes que el sistema se levante por completo. AquĂ­ puede cambiar esta\n"
+"opciĂłn.\n"
+"\n"
+" * NoVideo: en caso que el hardware de vĂ­deo de Apple sea excepcionalmente\n"
+"problemĂĄtico, puede seleccionar esta opciĂłn para arrancar en el modo\n"
+"\"novideo\", con soporte nativo para el frame-buffer.\n"
+"\n"
+" * Predeterminada: selecciona a esta entrada como la opciĂłn Linux por\n"
+"defecto, que se puede elegir simplemente presionando [Intro] en el prompt\n"
+"de Yaboot. Esta entrada también se marcarå con un \"*\", si presiona [Tab]\n"
+"para ver las selecciones del arranque."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituano \"fonético\" QWERTY"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"La impresora \"%s\" se agregĂł satisfactoriamente a Star Office/OpenOffice."
+"org."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituano \"numérico\" QWERTY"
+msgid "No floppy drive available!"
+msgstr "ÂĄNinguna disquetera disponible!"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituano AZERTY (nuevo)"
+msgid ""
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
+msgstr ""
+"Para conocer las opciones disponibles para la impresora corriente lea la "
+"lista que se muestra debajo o haga clic sobre el botĂłn \"Imprimir lista de "
+"opciones\".%s%s%s\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituano AZERTY (antiguo)"
+msgid "Continue anyway?"
+msgstr "ÂżSeguir adelante?"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Laotian"
-msgstr "Laosiano"
+msgid ""
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
+msgstr ""
+"Si no se lista su impresora, elija una compatible (vea el manual de la "
+"misma) o una simliar."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Latin American"
-msgstr "Latinoamericano"
+msgid "Printer"
+msgstr "Impresora"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Korean keyboard"
-msgstr "Coreano"
+msgid "Saudi Arabia"
+msgstr "Arabia SaudĂ­"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Japanese 106 keys"
-msgstr "Japonés de 106 teclas"
+msgid "Internet"
+msgstr "Internet"
-#: ../../keyboard.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Inuktitut"
-msgstr "Inuktitut"
+msgid "Some devices were added:\n"
+msgstr "Se agregaron algunos dispositivos:\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Italian"
-msgstr "Italiano"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "GeometrĂ­a: %s cilindros, %s cabezas, %s sectores\n"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Icelandic"
-msgstr "Islandés"
+msgid "Printing on the printer \"%s\""
+msgstr "Imprimiendo en la impresora \"%s\""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Iranian"
-msgstr "IranĂ­"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr "/etc/hosts.allow y /etc/hosts.deny ya configurados - no se cambiaron"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "Israelí (fonético)"
+msgid "Restore From Tape"
+msgstr "Restaurar desde cinta"
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Israeli"
-msgstr "IsraelĂ­"
+msgid "Choose the profile to configure"
+msgstr "Elija el perfil a configurar"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Croatian"
-msgstr "Croata"
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
+msgstr ""
+"\n"
+"\n"
+"Ingrese un nombre de la mĂĄquina Zeroconf sin puntos si no desea\n"
+"utilizar el nombre predeterminado."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hungarian"
-msgstr "HĂșngaro"
+msgid "Backup Now from configuration file"
+msgstr "Respaldar Ahora desde archivo de configuraciĂłn"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Gurmukhi"
-msgstr "Indio (Gurmukhi)"
+msgid "Mount points should contain only alphanumerical characters"
+msgstr "Los puntos de montaje deberían contener sólo caracteres alfanuméricos"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Gujarati"
-msgstr "Indio (Gujarati)"
+msgid "Restarting printing system..."
+msgstr "Reiniciando el sistema de impresiĂłn ..."
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Greek"
-msgstr "Griego"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
+msgstr ""
+"Argumentos: (name)\n"
+"\n"
+"Añadir el nombre como una excepción al manejo de edad de contraseñas por "
+"msec."
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgiano (estilo \"latĂ­n\")"
+msgid "See hardware info"
+msgstr "Ver informaciĂłn sobre el hardware"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgiano (estilo \"ruso\")"
+msgid "First sector of boot partition"
+msgstr "Primer sector de la particiĂłn de arranque"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "French"
-msgstr "Francés"
+msgid "Printer manufacturer, model"
+msgstr "Fabricante de la impresora, modelo"
-#: ../../keyboard.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Finnish"
-msgstr "Finlandés"
+msgid "PDQ - Print, Don't Queue"
+msgstr "PDQ - Print, Don't Queue (Imprimir, no encolar)"
-#: ../../keyboard.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Spanish"
-msgstr "Español"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
+msgstr ""
+"[OPCIONES]...\n"
+"Configurador del Servidor de Terminales de Mandrake (MTS)\n"
+"--enable : habilitar MTS\n"
+"--disable : deshabilitar MTS\n"
+"--start : iniciar MTS\n"
+"--stop : detener MTS\n"
+"--adduser : añadir usuario existente a MTS (necesita "
+"nombre_de_usuario)\n"
+"--deluser : quitar usuario existente de MTS (necesita "
+"nombre_de_usaurio)\n"
+"--addclient : añadir måquina cliente a MTS (necesita dirección MAC, IP, "
+"nombre imagen nbi)\n"
+"--delclient : quitar mĂĄquina cliente de MTS (necesita direcciĂłn MAC, "
+"IP, nombre imagen nbi)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Estonian"
-msgstr "Estonio"
+msgid "Subnet Mask:"
+msgstr "MĂĄscara de subred:"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Sueco)"
+msgid "LiLo and Bootsplash themes installation successfull"
+msgstr "InstalaciĂłn satisfactoria de LiLo y temas de Bootsplash"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Noruego)"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"Los dos parĂĄmetros crĂ­ticos son la frecuencia de barrido vertical, que "
+"indica la frecuencia\n"
+"a la cual se refresca la pantalla entera, y mĂĄs importante aĂșn, la "
+"frecuencia de sincronizaciĂłn\n"
+"horizontal, la cual es la frecuencia de las lĂ­neas de barrido horizontal.\n"
+"\n"
+"Es MUY IMPORTANTE que no especifique un tipo de monitor con una\n"
+"frecuencia de sincronizaciĂłn superior a la capacidad real de su monitor:\n"
+"puede dañar su monitor.\n"
+" En caso de duda, elija una configuraciĂłn conservadora."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
+msgid "Modify"
+msgstr "Modificar"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Danish"
-msgstr "Danés"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
+"\n"
+" Los comandos \"%s\" y \"%s\" también permiten modificar las opciones de "
+"configuración para un trabajo de impresión particular. Simplemente añada las "
+"opciones deseadas a la lĂ­nea de comando, por ejemplo \"%s <archivo>\".\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Devanagari"
-msgstr "Indio (Devanagari)"
+msgid "Need hostname, username and password!"
+msgstr "¥Necesita el nombre del host, el nombre de usuario y la contraseña!"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "German (no dead keys)"
-msgstr "AlemĂĄn (sin teclas muertas)"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
+"WebDAV es un protocolo que le permite montar localmente un directorio de un\n"
+"servidor web, y tratarlo como un sistema de archivos local (siempre y "
+"cuando\n"
+"el servidor web estå configurado como servidor WebDAV). Si desea añadir\n"
+"puntos de montaje WebDAV, seleccione \"Nuevo\"."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "German"
-msgstr "AlemĂĄn"
+msgid "HardDrake"
+msgstr "HardDrake"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Czech (QWERTY)"
-msgstr "Checo (QWERTY)"
+msgid "new"
+msgstr "nuevo"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Czech (QWERTZ)"
-msgstr "Checo (QWERTZ)"
+msgid "Would you like to try again?"
+msgstr "ÂżDesea intentar nuevamente?"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Swiss (French layout)"
-msgstr "Suizo (francés)"
+msgid "Wizard"
+msgstr "Asistente"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Swiss (German layout)"
-msgstr "Suizo (germĂĄnico)"
+msgid "Edit selected server"
+msgstr "Editar servidor seleccionado"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belarusian"
-msgstr "Bielorruso"
+msgid "Please choose where you want to backup"
+msgstr "Por favor, elija dĂłnde desea realizar la copia de respaldo"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bosnian"
-msgstr "Bosnio"
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr ""
+"Necesita reiniciar el equipo para que se efectĂșe la modificaciĂłn de la tabla "
+"de particiones"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasileño (ABNT-2)"
+msgid "Do not include the browser cache"
+msgstr "No incluir el cache del navegador"
-#: ../../keyboard.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Bulgarian (BDS)"
-msgstr "BĂșlgaro (BDS)"
+msgid "Please, choose your keyboard layout."
+msgstr "Por favor, seleccione la distribuciĂłn de su teclado."
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "BĂșlgaro (fonĂ©tico)"
+msgid "Standard"
+msgstr "EstĂĄndar"
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Bengali"
-msgstr "Indio (BengalĂ­)"
+msgid "Please choose your mouse type."
+msgstr "Seleccione el tipo de su ratĂłn, por favor."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Belgian"
-msgstr "Belga"
+msgid "Connect..."
+msgstr "Conectar..."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "AzerbadjĂĄn (latĂ­n)"
+msgid "Failed to configure printer \"%s\"!"
+msgstr "ÂĄFallĂł la configuraciĂłn de la impresora \"%s\"!"
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Arabic"
-msgstr "ArĂĄbico"
+msgid "not configured"
+msgstr "no configurada"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Armenian (phonetic)"
-msgstr "Armenio (fonético)"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Armenian (typewriter)"
-msgstr "Armenio (nuevo)"
+msgid "About"
+msgstr "Acerca de"
-#: ../../keyboard.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Armenian (old)"
-msgstr "Armenio (antiguo)"
+msgid "Proxies configuration"
+msgstr "ConfiguraciĂłn de los proxies"
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Albanian"
-msgstr "Albano"
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Polish"
-msgstr "Polaco"
+msgid "Start: sector %s\n"
+msgstr "Comienzo: sector %s\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Dvorak"
-msgstr "Dvorak"
+msgid "Network interface already configured"
+msgstr "Interfaz de red ya configurada"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Zimbabwe"
-msgstr "Zimbaue"
+msgid "Couldn't access the floppy!"
+msgstr "ÂĄNo se pudo acceder al disquete!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Zambia"
-msgstr "Zambia"
+msgid "connecting to Bugzilla wizard ..."
+msgstr "conectando con el asistente Bugzilla..."
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "South Africa"
-msgstr "SudĂĄfrica"
+msgid "Mail Server"
+msgstr "Servidor de correo"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Serbia"
-msgstr "Serbia"
+msgid "Please click on a partition"
+msgstr "Por favor, haga clic sobre una particiĂłn"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Mayotte"
-msgstr "Mayotte"
+msgid "Linux"
+msgstr "Linux"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Yemen"
-msgstr "Yemen"
+msgid "Have a nice day!"
+msgstr "ÂĄQue tenga un buen dĂ­a!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Samoa"
-msgstr "Samoa"
+msgid "across Network"
+msgstr "a través de la red"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Wallis and Futuna"
-msgstr "Wallis y Futuna"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Vanuatu"
-msgstr "Vanuatu"
+msgid "Upgrade %s"
+msgstr "Actualizar %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Vietnam"
-msgstr "Vietnam"
+msgid "Select Printer Connection"
+msgstr "Seleccione la conexiĂłn de la impresora"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Islas VĂ­rgenes (EE.UU.)"
+msgid "Scanning for TV channels in progress ..."
+msgstr "Buscando canales de TV, en progreso ..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Virgin Islands (British)"
-msgstr "Islas VĂ­rgenes (BritĂĄnicas)"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
+"Error enviando el archivo por FTP.\n"
+" Por favor, corrija su configuraciĂłn de FTP."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Venezuela"
-msgstr "Venezuela"
+msgid "IP Range Start:"
+msgstr "Comienzo de rango IP:"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "San Vicente y las Granadinas"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"El demonio para el superservidor de Internet (normalmente llamado inetd) "
+"inicia\n"
+"una variedad de servicios adicionales de internet segĂșn sea necesario.\n"
+"Es el responsable de iniciar varios servicios, incluyendo telnet, ftp, rsh\n"
+"y rlogin. Al desactivar inetd, se desactivan todos los servicios que "
+"dependen de Ă©l."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Vatican"
-msgstr "Vaticano"
+msgid "the height of the progress bar"
+msgstr "la altura de la barra de progreso"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Uzbekistan"
-msgstr "UzbekistĂĄn"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
+"\n"
+"- Guardar usando %s en el host: %s\n"
-#: ../../lang.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Uruguay"
-msgstr "Uruguay"
+msgid "Argentina"
+msgstr "Argentina"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "Islas Circundantes Menores de los Estados Unidos"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
+msgstr ""
+"Argumentos: (arg)\n"
+"\n"
+"Aceptar/Rechazar eco ICMP difundido."
-#: ../../lang.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Uganda"
-msgstr "Uganda"
+msgid "Domain Name Server"
+msgstr "Servidor de nombres de dominio"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Ukraine"
-msgstr "Ucrania"
+msgid "Security Level:"
+msgstr "Nivel de seguridad:"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Tanzania"
-msgstr "Tanzania"
+msgid "Mount points must begin with a leading /"
+msgstr "Los puntos de montaje deben comenzar con una /"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Taiwan"
-msgstr "TaiwĂĄn"
+msgid "Postfix Mail Server"
+msgstr "Servidor de correo Postfix"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Tuvalu"
-msgstr "Tuvalu"
+msgid "Quit without saving"
+msgstr "Salir sin grabar"
#: ../../lang.pm:1
#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Trinidad y Tobago"
+msgid "Yemen"
+msgstr "Yemen"
-#: ../../lang.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Turkey"
-msgstr "TurquĂ­a"
+msgid "This product is available on the MandrakeStore Web site."
+msgstr "Este producto estĂĄ disponible en el sitio web MandrakeStore"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Tonga"
-msgstr "Tonga"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr ""
+"Por favor, ingrese el tamaño måximo\n"
+" permitido para Drakbackup"
-#: ../../lang.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Tunisia"
-msgstr "Tunicia"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr "=> Hay muchas cosas para seleccionar (%s).\n"
-#: ../../lang.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Turkmenistan"
-msgstr "TurkmenistĂĄn"
+msgid "Hard drive detection"
+msgstr "DetecciĂłn del disco rĂ­gido"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "East Timor"
-msgstr "Timor Oriental"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
+"No ha seleccionado ningĂșn grupo de paquetes\n"
+"Elija por favor la mĂ­nima instalaciĂłn que quiera."
-#: ../../lang.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Tokelau"
-msgstr "Tokelau"
+msgid "Please enter the WebDAV server URL"
+msgstr "Por favor, ingrese la URL del servidor WebDAV"
#: ../../lang.pm:1
#, c-format
msgid "Tajikistan"
msgstr "TajikistĂĄn"
-#: ../../lang.pm:1
-#, c-format
-msgid "Thailand"
-msgstr "Tailandia"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Togo"
-msgstr "Togo"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "French Southern Territories"
-msgstr "Terrotorios Franceses del Sur"
-
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Chad"
-msgstr "Chad"
+msgid "Accept"
+msgstr "Aceptar"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "Islas Turks y Caicos"
+msgid "Description"
+msgstr "DescripciĂłn"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Swaziland"
-msgstr "Swazilandia"
+msgid "Error opening %s for writing: %s"
+msgstr "Error al abrir %s para escribir: %s"
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Syria"
-msgstr "Siria"
+msgid "Mouse type: %s\n"
+msgstr "Tipo de ratĂłn: %s\n"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "El Salvador"
-msgstr "El Salvador"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr "Su tarjeta puede admitir aceleraciĂłn 3D por hardware con XFree %s."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sao Tome and Principe"
-msgstr "Santo Tomé y Príncipe"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "Por favor, elija el tamaño de su CD/DVD"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Suriname"
-msgstr "Surinam"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
+msgstr ""
+"Argumentos: (arg)\n"
+"\n"
+"Permitir su sĂłlo a miembros del grupo wheel o permitir su a cualquier "
+"usuario."
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Somalia"
-msgstr "Somalia"
+msgid "Expert Area"
+msgstr "Área experta"
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Senegal"
-msgstr "Senegal"
+msgid "Choose a monitor"
+msgstr "Elija un monitor"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "San Marino"
-msgstr "San Marino"
+msgid "Empty label not allowed"
+msgstr "No se admite una etiqueta vacĂ­a"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Sierra Leone"
-msgstr "Sierra Leona"
+msgid "Maltese (UK)"
+msgstr "Maltés (Reino Unido)"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Slovakia"
-msgstr "Eslovaquia"
+msgid "I can't add any more partition"
+msgstr "No se pueden agregar mĂĄs particiones"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Islas Svalbard e Islas Jan Mayen"
+msgid "Size in MB: "
+msgstr "Tamaño en MB: "
-#: ../../lang.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Slovenia"
-msgstr "Eslovenia"
+msgid "Remote printer"
+msgstr "Impresora remota"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Saint Helena"
-msgstr "Santa Helena"
+msgid "Please choose a language to use."
+msgstr "Por favor, elija el idioma a usar."
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Singapore"
-msgstr "Singapur"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
+"ADVERTENCIA: Previamente se ha configurado este dispositivo para conectarse "
+"con Internet.\n"
+"Simplemente acepte para mantener la configuraciĂłn del dispositivo.\n"
+"Al modificar los campos de abajo se ignorarĂĄ esta configuraciĂłn."
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Sudan"
-msgstr "SudĂĄn"
+msgid "I can set up your computer to automatically log on one user."
+msgstr ""
+"Puedo configurar su computadora para que entre automĂĄticamente con un "
+"usuario."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Seychelles"
-msgstr "Seychelles"
+msgid "Floppy format"
+msgstr "Formato del disquete"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Solomon Islands"
-msgstr "Islas SalomĂłn"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Saudi Arabia"
-msgstr "Arabia SaudĂ­"
+msgid "Generic Printers"
+msgstr "Impresoras genéricas"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Rwanda"
-msgstr "Ruanda"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
+msgstr ""
+"Por favor, elija la impresora a la cual deberĂ­an ir los trabajos o ingrese "
+"el nombre de un dispositivo o archivo en la lĂ­nea de entrada"
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Russia"
-msgstr "Rusia"
+msgid "The scanners on this machine are available to other computers"
+msgstr ""
+"Los escĂĄneres en esta mĂĄquina estĂĄn disponibles para otras computadoras"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Romania"
-msgstr "RumanĂ­a"
+msgid "First sector of the root partition"
+msgstr "Primer sector de la particiĂłn raĂ­z"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Reunion"
-msgstr "ReuniĂłn"
+msgid "Alternative drivers"
+msgstr "Controladores alternativos"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Qatar"
-msgstr "Qatar"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
+"\n"
+"Por favor, marque todas las opciones que necesita.\n"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Palau"
-msgstr "Palau"
+msgid "Initrd"
+msgstr "Initrd"
#: ../../lang.pm:1
#, c-format
-msgid "Paraguay"
-msgstr "Paraguay"
+msgid "Cape Verde"
+msgstr "Cabo Verde"
-#: ../../lang.pm:1
-#, c-format
-msgid "Portugal"
-msgstr "Portugal"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr "Si esta CPU tiene o no el bug de la coma de Cyrix 6x86"
-#: ../../lang.pm:1
-#, c-format
-msgid "Palestine"
-msgstr "Palestina"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr ""
+"Los primeros Pentium eran defectuosos y se colgaban decodificando el cĂłdigo "
+"de bytes F00F"
#: ../../lang.pm:1
#, c-format
-msgid "Puerto Rico"
-msgstr "Puerto Rico"
+msgid "Guam"
+msgstr "Guam"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pitcairn"
-msgstr "Pitcairn"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
+msgstr ""
+"Por favor, elija el puerto donde estĂĄ conectada su impresora o ingrese el "
+"nombre de un dispositivo o archivo en la lĂ­nea de entrada"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "Saint Pierre y Miquelon"
+msgid "/Options/Test"
+msgstr "/Opciones/Prueba"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Poland"
-msgstr "Polonia"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+"Este nivel se debe usar con mucho cuidado. Hace su sistema mĂĄs simple de\n"
+"usar, pero también mucho mås vulnerable: no debe usarse para una måquina\n"
+"conectada en red con otras o a Internet. No hay contraseñas de acceso."
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Pakistan"
-msgstr "PakistĂĄn"
+msgid "Mounting partition %s"
+msgstr "Montando la particiĂłn %s"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Philippines"
-msgstr "Filipinas"
+msgid "User name"
+msgstr "Nombre del usuario"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Papua New Guinea"
-msgstr "PapĂșa Nueva Guinea"
+msgid "New configuration (isdn-light)"
+msgstr "ConfiguraciĂłn nueva (isdn-light)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "French Polynesia"
-msgstr "Polinesia Francesa"
+msgid "Userdrake"
+msgstr "Userdrake"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Peru"
-msgstr "PerĂș"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "¿Qué partición desea usar para Linux4Win?"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Panama"
-msgstr "PanamĂĄ"
+msgid "Backup system"
+msgstr "Respaldar el sistema"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Oman"
-msgstr "OmĂĄn"
+msgid "Test pages"
+msgstr "PĂĄginas de prueba"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "New Zealand"
-msgstr "Nueva Zelanda"
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
+"Lista de datos a restaurar:\n"
+"\n"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Niue"
-msgstr "Niue"
+msgid "Checking %s"
+msgstr "Verificando %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Nauru"
-msgstr "Nauru"
+msgid "TCP/Socket Printer Options"
+msgstr "Opciones de la impresora por socket/TCP"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Nepal"
-msgstr "Nepal"
+msgid "Card mem (DMA)"
+msgstr "Memoria (DMA) de la tarjeta"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Nicaragua"
-msgstr "Nicaragua"
+msgid "France"
+msgstr "Francia"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Nigeria"
-msgstr "Nigeria"
+msgid "browse"
+msgstr "examinar"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Norfolk Island"
-msgstr "Isla Norfolk"
+msgid "Checking installed software..."
+msgstr "Verificando software instalado..."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Niger"
-msgstr "NĂ­ger"
+msgid "Remote printer name missing!"
+msgstr "ÂĄFalta el nombre de la impresora remota!"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New Caledonia"
-msgstr "Nueva Caledonia"
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "ÂżDesea habilitar la impresiĂłn en las impresoras en la red local?\n"
#: ../../lang.pm:1
#, c-format
-msgid "Namibia"
-msgstr "Namibia"
+msgid "Turkey"
+msgstr "TurquĂ­a"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Mozambique"
-msgstr "Mozambique"
+msgid "Alcatel speedtouch usb"
+msgstr "Alcatel Speedtouch usb"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Malaysia"
-msgstr "Malasia"
+msgid "Number of buttons"
+msgstr "Cantidad de botones"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Mexico"
-msgstr "MĂ©xico"
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Vietnamita \"numérico\" QWERTY"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Malawi"
-msgstr "Malawi"
+msgid "Module"
+msgstr "MĂłdulo"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Maldives"
-msgstr "Maldivas"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
+msgstr ""
+"AdemĂĄs, las colas no creadas con este programa o con \"foomatic-configure\" "
+"no se pueden transferir."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mauritius"
-msgstr "Mauricio"
+msgid "Hardware"
+msgstr "Hardware"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Malta"
-msgstr "Malta"
+msgid "Ctrl and Alt keys simultaneously"
+msgstr "Las teclas Ctrl y Alt simultĂĄneamente"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Montserrat"
-msgstr "Monserrat"
+msgid "United States"
+msgstr "Estados Unidos"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mauritania"
-msgstr "Mauritania"
+msgid "Default OS?"
+msgstr "ÂżSO predeterminado?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Martinique"
-msgstr "Martinica"
+msgid "Swiss (German layout)"
+msgstr "Suizo (germĂĄnico)"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Northern Mariana Islands"
-msgstr "Islas Marianas del Norte"
+msgid "Configure all heads independently"
+msgstr "Configurar los monitores independientemente"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mongolia"
-msgstr "Mongolia"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr ""
+"Por favor seleccione la impresora que desea configurar. La configuraciĂłn de "
+"la impresora se harĂĄ de forma totalmente automatizada. Si su impresora no se "
+"detectĂł correctamente o si prefiere una configuraciĂłn personalizada, active "
+"la \"ConfiguraciĂłn manual\"."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Myanmar"
-msgstr "Myanmar"
+msgid "NTP Server"
+msgstr "Servidor NTP"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Mali"
-msgstr "Mali"
+msgid "Load/Save on floppy"
+msgstr "Cargar/Guardar en un disquete"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Macedonia"
-msgstr "Macedonia"
+msgid "This theme does not yet have a bootsplash in %s !"
+msgstr "ÂĄTodavĂ­a este tema no tiene un bootsplash en %s!"
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Marshall Islands"
-msgstr "Islas Marshall"
+msgid "nice"
+msgstr "bueno"
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Madagascar"
-msgstr "Madagascar"
+msgid "Leaving in %d seconds"
+msgstr "Saliendo en %d segundos"
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Moldova"
-msgstr "Moldavia"
+msgid "Please choose which serial port your modem is connected to."
+msgstr "Seleccione el puerto serie al que estĂĄ conectado su mĂłdem."
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Monaco"
-msgstr "MĂłnaco"
+msgid "Country"
+msgstr "PaĂ­s"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Morocco"
-msgstr "Marruecos"
+msgid "Property"
+msgstr "Propiedad"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Libya"
-msgstr "Libia"
+msgid "Ghostscript"
+msgstr "Ghostscript"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Latvia"
-msgstr "Letonia"
+msgid "LAN Configuration"
+msgstr "ConfiguraciĂłn LAN"
#: ../../lang.pm:1
#, c-format
-msgid "Luxembourg"
-msgstr "Luxemburgo"
+msgid "Ghana"
+msgstr "Ghana"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lithuania"
-msgstr "Lituania"
+msgid "Path or Module required"
+msgstr "Se necesita Ruta o MĂłdulo"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Lesotho"
-msgstr "Lesoto"
+msgid "Advanced Options"
+msgstr "Opciones avanzadas"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Liberia"
-msgstr "Liberia"
+msgid "Coma bug"
+msgstr "Bug de la coma"
-#: ../../lang.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Sri Lanka"
-msgstr "Sri Lanka"
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
+"Ahora necesita elegir qué particiones se utilizarån para la instalación de\n"
+"su sistema Mandrake Linux. Si las particiones ya han sido definidas, ya sea\n"
+"por una instalaciĂłn previa de GNU/Linux o con otra herramienta de\n"
+"particionado, puede utilizarlas. De lo contrario, se deben definir\n"
+"particiones en el disco rĂ­gido.\n"
+"\n"
+"Para crear particiones, primero debe seleccionar un disco rĂ­gido. Puede\n"
+"seleccionar el disco a particionar haciendo clic sobre \"hda\" para el\n"
+"primer disco IDE, \"hdb\" para el segundo, \"sda\" para el primer disco\n"
+"SCSI y asĂ­ sucesivamente.\n"
+"\n"
+"Para particionar el disco rĂ­gido seleccionado, puede utilizar estas\n"
+"opciones:\n"
+"\n"
+" * \"%s\": esta opciĂłn borra todas las particiones sobre el disco\n"
+"seleccionado.\n"
+"\n"
+" * \"%s\": esta opciĂłn le permite crear particiones ext3 y swap\n"
+"automĂĄticamente en el espacio libre de su disco rĂ­gido.\n"
+"\n"
+" * \"%s\": le da acceso a caracterĂ­sticas adicionales:\n"
+"\n"
+" * \"%s\": guarda la tabla de particiones en un disquete. Útil para\n"
+"recuperar la tabla de particiones mĂĄs adelante en caso que sea necesario.\n"
+"Es altamente recomendable realizar este paso.\n"
+"\n"
+" * \"%s\": esta opciĂłn le permitirĂĄ restaurar una tabla de particiones\n"
+"guardada previamente en un disquete.\n"
+"\n"
+" * \"%s\": si su tabla de particiones estå dañada puede intentar\n"
+"recuperarla utilizando esta opciĂłn. Por favor, tenga cuidado y recuerde que\n"
+"puede fallar.\n"
+"\n"
+" * \"%s\": descarta todos los cambios y carga su tabla de particiones\n"
+"inicial.\n"
+"\n"
+" * \"%s\": si desmarca esta opciĂłn los usuarios estarĂĄn forzados a\n"
+"montar y desmontar manualmente los soportes removibles como los disquetes y\n"
+"los CD-ROM.\n"
+"\n"
+" * \"%s\": use esta opciĂłn si desea utilizar un asistente para particionar\n"
+"su disco rĂ­gido. Se recomienda esto si no tiene un buen conocimiento del\n"
+"particionado.\n"
+"\n"
+" * \"%s\": use esta opciĂłn para cancelar sus cambios.\n"
+"\n"
+" * \"%s\": permite realizar acciones adicionales sobre las particiones\n"
+"(tipo, opciones, formatear) y brinda mĂĄs informaciĂłn.\n"
+"\n"
+" * \"%s\": cuando ha terminado de particionar su disco rĂ­gido, esto\n"
+"guardarĂĄ sus cambios en el disco.\n"
+"\n"
+"Cuando se define el tamaño de una partición, puede realizar un ajuste fino\n"
+"del tamaño utilizando las teclas de las flechas de su teclado.\n"
+"\n"
+"Nota: todas las opciones son accesibles por medio del teclado. Navegue a\n"
+"través de las particiones usando [Tab] y las flechas [Arriba/Abajo].\n"
+"\n"
+"Cuando se selecciona una particiĂłn, puede utilizar:\n"
+"\n"
+" * [Ctrl][C] para crear una particiĂłn nueva (cuando estĂĄ seleccionada una\n"
+"particiĂłn vacĂ­a);\n"
+"\n"
+" * [Ctrl][D] para borrar una particiĂłn;\n"
+"\n"
+" * [Ctrl][M] para configurar el punto de montaje.\n"
+"\n"
+"Para obtener informaciĂłn sobre los distintos tipos de sistemas de archivos\n"
+"disponibles, por favor lea el capĂ­tulo acerca de ext2FS del \"Manual de\n"
+"Referencia\".\n"
+"\n"
+"Si estå instalando en una måquina PPC, querrå crear una pequeña partición\n"
+"HFS de \"bootstrap\" de al menos 1 MB que serĂĄ utilizada por el cargador de\n"
+"arranque yaboot. Si opta por hacer la particiĂłn un poco mĂĄs grande, digamos\n"
+"50 MB, puede ver que es un lugar Ăștil para almacenar un nĂșcleo y ramdisk\n"
+"alternativos para arrancar en situaciones de emergencia."
-#: ../../lang.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Liechtenstein"
-msgstr "Liechtenstein"
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
+"Tarjeta grĂĄfica\n"
+"\n"
+" Normalmente el instalador puede detectar y configurar automĂĄticamente la\n"
+"tarjeta grĂĄfica instalada en su mĂĄquina. Si este no es el caso, en esta\n"
+"lista puede elegir la tarjeta que realmente posee.\n"
+"\n"
+" En caso que estén disponibles diferentes servidores para su tarjeta, con\n"
+"o sin aceleraciĂłn de 3D, entonces se le propone elegir el servidor que\n"
+"mejor satisface sus necesidades."
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Saint Lucia"
-msgstr "Santa LucĂ­a"
+msgid "There was an error installing packages:"
+msgstr "Hubo un error al instalar los paquetes:"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lebanon"
-msgstr "LĂ­bano"
+msgid "Lexmark inkjet configuration"
+msgstr "ConfiguraciĂłn de impresora de inyecciĂłn de tinta Lexmark"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Laos"
-msgstr "Laos"
+msgid "Undo"
+msgstr "Deshacer"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Kazakhstan"
-msgstr "KazajstĂĄn"
+msgid "Save partition table"
+msgstr "Guardar la tabla de particiones"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Cayman Islands"
-msgstr "Islas CaimĂĄn"
+msgid "Finnish"
+msgstr "Finlandés"
#: ../../lang.pm:1
#, c-format
-msgid "Kuwait"
-msgstr "Kuwait"
+msgid "Macedonia"
+msgstr "Macedonia"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Korea"
-msgstr "Corea"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
+"La comparticiĂłn por usuario utiliza el grupo \"fileshare\". \n"
+"Puede utilizar UserDrake para añadir un usuario a este grupo."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Korea (North)"
-msgstr "Corea (del Norte)"
+msgid "Slovenian"
+msgstr "Esloveno"
#: ../../lang.pm:1
#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "Saint Kitts y Nevis"
+msgid "Libya"
+msgstr "Libia"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Comoros"
-msgstr "Comores"
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr ""
+"Configurando los scripts, instalando el software, iniciando los servidores..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Kiribati"
-msgstr "Kiribati"
+msgid ""
+"\n"
+"- Burn to CD"
+msgstr ""
+"\n"
+"- Grabar en CD"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Cambodia"
-msgstr "Camboya"
+msgid "Table"
+msgstr "Tabla"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Kyrgyzstan"
-msgstr "KirguizistĂĄn"
+msgid "I don't know how to format %s in type %s"
+msgstr "No sé cómo formatear %s en el tipo %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Kenya"
-msgstr "Kenia"
+msgid "Model"
+msgstr "Modelo"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Japan"
-msgstr "JapĂłn"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
+msgstr ""
+"Argumentos: (arg)\n"
+"\n"
+"Habilitar/deshabilitar libsafe si es que se encuentra en el sistema."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Jordan"
-msgstr "Jordania"
+msgid "Stop Server"
+msgstr "Detener el Servidor"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Jamaica"
-msgstr "Jamaica"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
+msgstr ""
+"\n"
+"Seleccione un tema para\n"
+"lilo y bootsplash,\n"
+"puede elegirlos\n"
+"por separado"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Iceland"
-msgstr "Islandia"
+msgid "Modem"
+msgstr "MĂłdem"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Iran"
-msgstr "IrĂĄn"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
+msgstr ""
+"Argumentos: (arg, listen_tcp=None)\n"
+"\n"
+"Permitir/Prohibir conexiones X. El primer argumento especifica qué se hace\n"
+"en el lado cliente: ALL (permitir todas las conexiones), LOCAL (sĂłlo\n"
+"conexiones locales) y NONE (ninguna conexiĂłn)"
#: ../../lang.pm:1
#, c-format
-msgid "Iraq"
-msgstr "Iraq"
+msgid "Tuvalu"
+msgstr "Tuvalu"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "Territorio BritĂĄnico del OcĂ©ano Índico"
+msgid "Use auto detection"
+msgstr "Usar detecciĂłn automĂĄtica"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "India"
-msgstr "India"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr ""
+"GPM añade soporte del ratón para los programas Linux en modo texto, como\n"
+"el Midnight Commander. También permite operaciones de cortar-y-pegar con\n"
+"el ratĂłn en la consola, e incluye soporte para menĂșs emergentes en la "
+"consola."
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Israel"
-msgstr "Israel"
+msgid "Started on boot"
+msgstr "Iniciado al arranque"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Ireland"
-msgstr "Irlanda"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
+msgstr ""
+"Únase a los equipos de soporte de Mandrakesoft y de la Comunidad Linux en "
+"línea para compartir su conocimiento y ayudar a otros convirtiéndose en un "
+"Experto reconocido en el sitio web de soporte técnico en línea:"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Indonesia"
-msgstr "Indonesia"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
+msgstr ""
+"Se pueden configurar las opciones siguientes para personalizar\n"
+"la seguridad de su sistema. Si necesita explicaciĂłn, mire la ayuda "
+"emergente.\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hungary"
-msgstr "HungrĂ­a"
+msgid "Automatically find available printers on remote machines"
+msgstr "Encontrar automĂĄticamente impresoras disponibles en mĂĄquinas remotas"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Haiti"
-msgstr "HaitĂ­"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
+"\n"
+"- Guardar en cinta en el dispositivo: %s"
#: ../../lang.pm:1
#, c-format
-msgid "Croatia"
-msgstr "Croacia"
+msgid "East Timor"
+msgstr "Timor Oriental"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Honduras"
-msgstr "Honduras"
+msgid "Del profile..."
+msgstr "Borrar perfil..."
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Islas Heard y McDonald"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr ""
+"Argumentos: (arg)\n"
+"\n"
+"Permitir/Prohibir la lista de usuarios del sistema en administradores de "
+"conexiĂłn (kdm y gdm)"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hong Kong"
-msgstr "Hong Kong"
+msgid "Installing Foomatic..."
+msgstr "Instalando Foomatic ..."
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "China"
-msgstr "China"
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "Por favor salga de la sesiĂłn y luego pulse Ctrl-Alt-BackSpace"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Guyana"
-msgstr "Guyana"
+msgid "detected"
+msgstr "detectada"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Guinea-Bissau"
-msgstr "Guinea-Bissau"
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr "Se necesita reiniciar la red. ÂżDesea reiniciarla?"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Guam"
-msgstr "Guam"
+msgid "Package: "
+msgstr "Paquete:"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Guatemala"
-msgstr "Guatemala"
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr "No se puede escribir /etc/sysconfig/bootsplash."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "Islas Georgia del Sur y Sandwich del Sur"
+msgid "SECURITY WARNING!"
+msgstr "ÂĄADVERTENCIA DE SEGURIDAD!"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Equatorial Guinea"
-msgstr "Guinea Ecuatorial"
+msgid "StarOffice"
+msgstr "StarOffice"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Guadeloupe"
-msgstr "Guadalupe"
+msgid "No, I don't want autologin"
+msgstr "No, no deseo entrada automĂĄtica"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Guinea"
-msgstr "Guinea"
+msgid "Windows Migration tool"
+msgstr "Herramienta para migrar desde Windows"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Gambia"
-msgstr "Gambia"
+msgid "All languages"
+msgstr "Todos los idiomas"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Greenland"
-msgstr "Groenlandia"
+msgid "Removing %s"
+msgstr "Borrando %s"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Gibraltar"
-msgstr "Gibraltar"
+msgid "Testing your connection..."
+msgstr "Probando su conexiĂłn..."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Ghana"
-msgstr "Ghana"
+msgid "Cache size"
+msgstr "Tamaño del caché"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "French Guiana"
-msgstr "Guayana Francesa"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
+msgstr ""
+"Las contraseñas estån activadas, pero tampoco se recomienda usar este\n"
+"nivel para un ordenador conectado a una red."
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Georgia"
-msgstr "Georgia"
+msgid "Start sector: "
+msgstr "Sector de comienzo: "
#: ../../lang.pm:1
#, c-format
-msgid "Grenada"
-msgstr "Granada"
+msgid "Congo (Brazzaville)"
+msgstr "Congo (Brazzaville)"
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "United Kingdom"
-msgstr "Reino Unido"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr "Se necesita instalar el paquete %s. ÂżQuiere instalarlo?"
#: ../../lang.pm:1
#, c-format
-msgid "Gabon"
-msgstr "GabĂłn"
+msgid "Seychelles"
+msgstr "Seychelles"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Faroe Islands"
-msgstr "Islas Feroe"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
+msgstr ""
+"Printerdrake ha comparado el modelo que resultĂł de la detecciĂłn automĂĄtica "
+"con los modelos listados en su base de datos de impresoras para encontrar la "
+"mejor coincidencia. Esta elecciĂłn puede estar equivocada, especialmente si "
+"su impresora no estĂĄ listada en absoluto en la base de datos. Entonces, "
+"verifique si la elecciĂłn es correcta y haga clic en \"El modelo es correcto"
+"\" , caso contrario, haga clic en \"Seleccionar el modelo manualmente\" de "
+"forma tal que pueda elegir el modelo de su impresora manualmente en la "
+"pantalla siguiente.\n"
+"\n"
+"Para su impresora Printerdrake ha encontrado:\n"
+"\n"
+"%s"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Micronesia"
-msgstr "Micronesia"
+msgid "Bad password on %s"
+msgstr "Contraseña incorrecta en %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Islas Malvinas"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
+msgstr ""
+"\n"
+"Hay una impresaora desconocida conectada directamente a su sistema"
#: ../../lang.pm:1
#, c-format
-msgid "Fiji"
-msgstr "Fidji"
+msgid "Zambia"
+msgstr "Zambia"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Finland"
-msgstr "Finlandia"
+msgid "Security Administrator (login or email)"
+msgstr "Administrador de la seguridad (login o correo electrĂłnico)"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Ethiopia"
-msgstr "EtiopĂ­a"
+msgid "Sorry, we support only 2.4 kernels."
+msgstr "Lo siento, sĂłlo se soportan los nĂșcleos 2.4."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Spain"
-msgstr "España"
+msgid "Romanian (qwerty)"
+msgstr "Rumano (qwerty)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Eritrea"
-msgstr "Eritrea"
+msgid "Under Devel ... please wait."
+msgstr "En desarrollo ... por favor, espere."
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Western Sahara"
-msgstr "Sahara Oeste"
+msgid "Czech Republic"
+msgstr "RepĂșblica Checa"
#: ../../lang.pm:1
#, c-format
msgid "Egypt"
msgstr "Egipto"
-#: ../../lang.pm:1
-#, c-format
-msgid "Estonia"
-msgstr "Estonia"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Ecuador"
-msgstr "Ecuador"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Algeria"
-msgstr "Argelia"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Dominican Republic"
-msgstr "RepĂșblica Dominicana"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Dominica"
-msgstr "Dominica"
-
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Denmark"
-msgstr "Dinamarca"
+msgid "Old configuration (isdn4net)"
+msgstr "ConfiguraciĂłn antigua (isdn4net)"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Djibouti"
-msgstr "Djibuti"
+msgid "Sound card"
+msgstr "Tarjeta de sonido"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Cyprus"
-msgstr "Chipre"
+msgid "Import Fonts"
+msgstr "ImportaciĂłn de tipografĂ­as"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Christmas Island"
-msgstr "Isla Navidad"
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+"Tiene una partición Microsoft Windows de gran tamaño.\n"
+"Le sugiero que primero cambie el tamaño de la misma\n"
+"(para eso haga clic sobre ella, y luego sobre \"Redimensionar\")"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Cape Verde"
-msgstr "Cabo Verde"
+msgid "Suppress Temporary Files"
+msgstr "Suprimir archivos temporales"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cuba"
-msgstr "Cuba"
+msgid "Change partition type"
+msgstr "Cambiar el tipo de particiĂłn"
-#: ../../lang.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Colombia"
-msgstr "Colombia"
+msgid ""
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
+"ResoluciĂłn\n"
+"\n"
+" AquĂ­ puede elegir las resoluciones y profundidades de color entre\n"
+"aquellas disponibles para su hardware. Elija la que mejor se ajuste a sus\n"
+"necesidades (tenga presente que eso se puede cambiar luego de la\n"
+"instalaciĂłn) En el monitor se muestra un ejemplo de la configuraciĂłn\n"
+"elegida."
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Cameroon"
-msgstr "CamerĂșn"
+msgid "Network Options"
+msgstr "Opciones de red"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Chile"
-msgstr "Chile"
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
+"Mostrar tema\n"
+"bajo la consola"
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Cook Islands"
-msgstr "Islas Cook"
+msgid "Statistics"
+msgstr "EstadĂ­sticas"
-#: ../../lang.pm:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Cote d'Ivoire"
-msgstr "Costa de Marfil"
+msgid "(on %s)"
+msgstr "(en %s)"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Switzerland"
-msgstr "Suiza"
+msgid "MM Series"
+msgstr "MM Series"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Congo (Brazzaville)"
-msgstr "Congo (Brazzaville)"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr ""
+"Una biblioteca que le defiende ante ataques de desbordamiento de bĂșfer y "
+"ataques con cadenas de formato."
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Central African Republic"
-msgstr "RepĂșblica Centroafricana"
+msgid "average"
+msgstr "promedio"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congo (Kinshasa)"
-msgstr "Congo (Kinshasa)"
+msgid "New printer name"
+msgstr "Nuevo nombre de la impresora"
#: ../../lang.pm:1
#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Islas Cocos (Keeling)"
+msgid "Equatorial Guinea"
+msgstr "Guinea Ecuatorial"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Canada"
-msgstr "CanadĂĄ"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
+"Argumentos: (arg)\n"
+"\n"
+"Permitir/Prohibir conexiĂłn automĂĄtica."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belize"
-msgstr "Belice"
+msgid "Build Backup"
+msgstr "Realizar copia de respaldo"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Belarus"
-msgstr "Bielorrusia"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
+"Para imprimir un archivo desde la lĂ­nea de comando (ventana de terminal) use "
+"el comando \"%s <archivo>\" o \"%s <archivo>\".\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Botswana"
-msgstr "Botswana"
+msgid "Currently, no alternative possibility is available"
+msgstr "En este momento no hay alternativa posible"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Bouvet Island"
-msgstr "Isla Bouvet"
+msgid "Romanian (qwertz)"
+msgstr "Rumano (qwertz)"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Bhutan"
-msgstr "ButĂĄn"
+msgid "Write Config"
+msgstr "Escribir configuraciĂłn"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Bahamas"
-msgstr "Bahamas"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+"El demonio routed permite actualizar automĂĄticamente las tablas de "
+"enrutamiento IP\n"
+"gracias al protocolo RIP. Mientras que RIP se usa bastante en redes "
+"pequeñas,\n"
+"para redes mĂĄs complejas, se necesitan protocolos de enrutamiento mĂĄs "
+"complejos."
#: ../../lang.pm:1
#, c-format
-msgid "Brazil"
-msgstr "Brasil"
+msgid "Kiribati"
+msgstr "Kiribati"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Bolivia"
-msgstr "Bolivia"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
+msgstr ""
+"Argumentos: (arg)\n"
+"\n"
+"Permitir/Prohibir conexiĂłn remota de root."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Brunei Darussalam"
-msgstr "Brunei Darussalam"
+msgid "Browse"
+msgstr "Examinar"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Bermuda"
-msgstr "Bermuda"
+msgid "CDROM"
+msgstr "CD-ROM"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Benin"
-msgstr "BenĂ­n"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "ÂżDesea intentar conectarse a Internet ahora?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Burundi"
-msgstr "Burundi"
+msgid "Belgian"
+msgstr "Belga"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bahrain"
-msgstr "Bahrein"
+msgid "Do you have an ISA sound card?"
+msgstr "ÂżTiene una tarjeta de sonido ISA?"
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Bulgaria"
-msgstr "Bulgaria"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
+msgstr ""
+"No se ha detectado ningĂșn adaptador de red ethernet en su sistema.\n"
+"No se puede configurar este tipo de conexiĂłn."
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Burkina Faso"
-msgstr "Burkina Faso"
+msgid "Windows"
+msgstr "Windows"
-#: ../../lang.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Bangladesh"
-msgstr "Bangladesh"
+msgid "Can't make screenshots before partitioning"
+msgstr "No se pueden realizar instantĂĄneas de pantalla antes del particionado"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Barbados"
-msgstr "Barbados"
+msgid "Host Name"
+msgstr "Nombre del host"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Bosnia Herzegovina"
+msgid "/File/Save _As"
+msgstr "/Archivo/Guardar _Como"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Azerbaijan"
-msgstr "AzerbayĂĄn"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr ""
+"Para acceder a impresoras en servidores CUPS remotos en su red local, sĂłlo "
+"necesita habilitar la opciĂłn \"Encontrar automĂĄticamente impresoras "
+"disponibles en mĂĄquinas remotas\"; los servidores CUPS informan a la mĂĄquina "
+"automĂĄticamente sobre sus impresoras. Todas las impresoras que su mĂĄquina "
+"conoce corrientemente se listan en la secciĂłn \"Impresoras remotas\" en la "
+"ventana principal de Printerdrake. Si sus servidores CUPS no estĂĄn en su red "
+"local, tiene que ingresar aquĂ­ las direcciones IP y opcionalmente los "
+"nĂșmeros de puerto para obtener la informaciĂłn de las impresoras de los "
+"servidores."
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Aruba"
-msgstr "Aruba"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr ""
+"%s no estĂĄ en la base de datos de escĂĄneres, Âżconfigurarlo manualmente?"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "Australia"
-msgstr "Australia"
+msgid "Delay before booting default image"
+msgstr "Demora antes de arrancar la imagen predeterminada"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "American Samoa"
-msgstr "Samoa Americana"
+msgid "Restrict command line options"
+msgstr "Restringir las opciones de la lĂ­nea de comandos"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Argentina"
-msgstr "Argentina"
+msgid "East Europe"
+msgstr "Europa del este"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Antarctica"
-msgstr "AntĂĄrtica"
+msgid "Use free space"
+msgstr "Usar el espacio libre"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Angola"
-msgstr "Angola"
+msgid "use dhcp"
+msgstr "usar dhcp"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Netherlands Antilles"
-msgstr "Antillas Holandesas"
+msgid "Mail alert"
+msgstr "Alerta por correo"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Armenia"
-msgstr "Armenia"
+msgid "Internet configuration"
+msgstr "ConfiguraciĂłn de Internet"
#: ../../lang.pm:1
#, c-format
-msgid "Albania"
-msgstr "Albania"
+msgid "Uzbekistan"
+msgstr "UzbekistĂĄn"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Anguilla"
-msgstr "Anguilla"
+msgid "Detected %s"
+msgstr "Detectada %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Antigua y Barbuda"
+msgid "/Autodetect _printers"
+msgstr "/Autodetectar im_presoras"
-#: ../../lang.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "United Arab Emirates"
-msgstr "Emiratos Árabes Unidos"
+msgid "Finish"
+msgstr "Finalizar"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Andorra"
-msgstr "Andorra"
+msgid "Show automatically selected packages"
+msgstr "Mostrar los paquetes seleccionados automĂĄticamente"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Afghanistan"
-msgstr "AfganistĂĄn"
+msgid "CPU flags reported by the kernel"
+msgstr "Flags del CPU reportados por el nĂșcleo"
#: ../../lang.pm:1
#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
-
-#: ../../loopback.pm:1
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Montajes circulares %s\n"
-
-#: ../../lvm.pm:1
-#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Quite los volĂșmenes lĂłgicos primero\n"
-
-#: ../../modules.pm:1
-#, c-format
-msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"El soporte PCMCIA no existe en los nĂșcleos 2.2. Por favor, utilice un nĂșcleo "
-"2.4."
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "ÂĄMUEVA SU RUEDA!"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "To activate the mouse,"
-msgstr "Para activar el ratĂłn,"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "Please test the mouse"
-msgstr "Pruebe su ratĂłn, por favor."
+msgid "Togo"
+msgstr "Togo"
-#: ../../mouse.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "No mouse"
-msgstr "Sin ratĂłn"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr "ÂĄOcurriĂł algo malo! - ÂżEstĂĄ instalado mkisofs?"
-#: ../../mouse.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "none"
-msgstr "ninguno"
+msgid "16 MB"
+msgstr "16 MB"
-#: ../../mouse.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "3 buttons"
-msgstr "3 botones"
+msgid "Please try again"
+msgstr "Vuelva a intentarlo, por favor"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "2 buttons"
-msgstr "2 botones"
+msgid "The model is correct"
+msgstr "El modelo es correcto"
-#: ../../mouse.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "1 button"
-msgstr "1 botĂłn"
+msgid "FAT resizing failed: %s"
+msgstr "FallĂł el redimensionado de la FAT: %s"
-#: ../../mouse.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "busmouse"
-msgstr "ratĂłn bus"
+msgid "Individual package selection"
+msgstr "SelecciĂłn de paquetes individuales"
-#: ../../mouse.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid "This partition is not resizeable"
+msgstr "Esta particiĂłn no es redimensionable"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "RatĂłn Logitech (serie, antiguo tipo C7)"
+msgid "Location"
+msgstr "UbicaciĂłn"
-#: ../../mouse.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid "USA (cable-hrc)"
+msgstr "EEUU (cable-hrc)"
-#: ../../mouse.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "MM Series"
-msgstr "MM Series"
+msgid "Journalised FS"
+msgstr "S. de a. con journal"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid "Guatemala"
+msgstr "Guatemala"
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "This machine"
+msgstr "Esta mĂĄquina"
-#: ../../mouse.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "Letra DOS: %s (simplemente una adivinanza)\n"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select the files or directories and click on 'OK'"
+msgstr "Seleccione los archivos o directorios y haga clic sobre 'Agregar'"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid "Bahrain"
+msgstr "Bahrein"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "omit scsi modules"
+msgstr "omitir mĂłdulos scsi"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Ratón de 3 botones genérico"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr "Familia de la CPU (ej: 6 para clase i686)"
-#: ../../mouse.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Ratón de 2 botones genérico"
+msgid ""
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
+msgstr ""
+"Puesto que estĂĄ realizando una instalaciĂłn por red, su red ya estĂĄ "
+"configurada.\n"
+"Haga clic sobre aceptar para mantener su configuraciĂłn, o pulse cancelar "
+"para\n"
+"volver a configurar sus conexiones de red y a Internet.\n"
-#: ../../mouse.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "serial"
-msgstr "serie"
+msgid "Keyboard layout: %s\n"
+msgstr "DistribuciĂłn del teclado: %s\n"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
+"AquĂ­ puede elegir si las impresoras conectadas a esta mĂĄquina deberĂ­an poder "
+"accederse desde måquinas remotas y desde qué måquinas remotas."
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Wheel"
-msgstr "Rueda"
+msgid "Maltese (US)"
+msgstr "Maltés (EE.UU.)"
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Generic"
-msgstr "Genérico"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"Monta y desmonta todos los puntos de montaje de sistemas de archivos\n"
+"compartidos por medio de la red; como NFS (Network File System),\n"
+"SMB (Lan Manager/Windows) y NCP (Netware)"
-#: ../../mouse.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid "Tvcard"
+msgstr "Tarjeta de TV"
-#: ../../mouse.pm:1
-#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Toggle between normal/expert mode"
+msgstr "Cambiar al modo normal"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Ratón genérico PS2 con rueda"
+msgid "Size"
+msgstr "Tamaño"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "GRUB"
+msgstr "GB"
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Standard"
-msgstr "EstĂĄndar"
+msgid "Greenland"
+msgstr "Groenlandia"
#: ../../mouse.pm:1
#, c-format
-msgid "Sun - Mouse"
-msgstr "RatĂłn Sun"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Cambiar entre vista plana y ordenada por grupos"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Collapse Tree"
-msgstr "Contraer el ĂĄrbol"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Expand Tree"
-msgstr "Expandir el ĂĄrbol"
-
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Info"
-msgstr "Info"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Is this correct?"
-msgstr "ÂżEs correcto?"
-
-#: ../../my_gtk.pm:1
-#, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Error al escribir en el archivo %s"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Bad backup file"
-msgstr "Archivo de respaldo incorrecto"
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
-#: ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "FallĂł la restauraciĂłn a partir del archivo %s: %s"
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr "No es la cinta adecuada. La cinta estĂĄ etiquetada %s."
-#: ../../partition_table.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"Tiene un hueco en la tabla de particiones, pero no se puede usar.\n"
-"La Ășnica soluciĂłn es desplazar sus particiones primarias para que el hueco "
-"esté después de las particiones extendidas"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "La particiĂłn extendida no estĂĄ disponible en esta plataforma"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "mount failed: "
-msgstr "mount fallĂł: "
-
-#: ../../pkgs.pm:1
-#, c-format
-msgid "maybe"
-msgstr "quizĂĄs"
-
-#: ../../pkgs.pm:1
-#, c-format
-msgid "nice"
-msgstr "bueno"
-
-#: ../../pkgs.pm:1
-#, c-format
-msgid "very nice"
-msgstr "muy bueno"
+"Ya se ha realizado la configuraciĂłn de la conexiĂłn compartida a Internet.\n"
+"Ahora estĂĄ activa.\n"
+"\n"
+"¿Qué desea hacer?"
-#: ../../pkgs.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "important"
-msgstr "importante"
+msgid "Delete All NBIs"
+msgstr "Borrar todos los NBI"
-#: ../../pkgs.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "must have"
-msgstr "necesario"
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
+msgstr ""
+"Este diĂĄlogo le permite un ajuste fino de su cargador de arranque:\n"
+"\n"
+" * \"%s\": hay tres opciones para su cargador de arranque:\n"
+"\n"
+" * \"%s\": si prefiere a grub (menĂș de texto).\n"
+"\n"
+" * \"%s\": si prefiere a LILO con su interfaz de texto.\n"
+"\n"
+" * \"%s\": si prefiere a LILO con su interfaz grĂĄfica.\n"
+"\n"
+" * \"%s\": en la mayorĂ­a de los casos, no cambiarĂĄ lo predeterminado\n"
+"(\"%s\"), pero si lo prefiere el cargador de arranque se puede instalar en\n"
+"el segundo disco rĂ­gido (\"%s\") o incluso en un disquete (\"%s\")\n"
+"\n"
+" * \"%s\": luego de arrancar o volver a arrancar la computadora, esta es la\n"
+"demora que se garantiza al usuario para elegir, en el menĂș del cargador de\n"
+"arranque, una entrada distinta a la predeterminada.\n"
+"\n"
+"!! Tenga presente que si no elige instalar un cargador de arranque\n"
+"(seleccionando \"%s\"), ÂĄdebe asegurarse que tiene una forma de arrancar a\n"
+"su sistema Mandrake Linux! También debe asegurarse que sabe lo que hace\n"
+"antes de cambiar cualquier opciĂłn. !!\n"
+"\n"
+"Haciendo clic sobre el botĂłn \"%s\" en este diĂĄlogo se le ofrecerĂĄn\n"
+"opciones avanzadas que estĂĄn reservadas para el usuario experto."
-#: ../../raid.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "No hay suficientes particiones para un RAID de nivel %d\n"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
+msgstr ""
+"si estĂĄ activo, enviar el correo de reporte a esta direcciĂłn, caso contrario "
+"a root."
-#: ../../raid.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "mkraid failed"
-msgstr "FallĂł mkraid"
+msgid "Which configuration of XFree do you want to have?"
+msgstr "¿Qué tipo de configuración de XFree desea tener?"
-#: ../../raid.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "Falló mkraid (¿quizås no estén las herramientas de raid (raidtools)?)"
+msgid "More"
+msgstr "MĂĄs"
-#: ../../raid.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "No se puede añadir una partición al RAID md%d _ya formateado_"
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+"Con este nivel de seguridad, es posible utilizar el sistema como un "
+"servidor.\n"
+"La seguridad es lo suficientemente alta como para usar el sistema como un\n"
+"servidor que acepte conexiones de mĂșltiples clientes. Nota: si su mĂĄquina "
+"sĂłlo es un cliente en la Internet, mejor deberĂ­a elegir un nivel inferior."
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Stop"
-msgstr "Parar"
+msgid "Account Password"
+msgstr "Contraseña de la cuenta"
-#: ../../services.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Start"
-msgstr "Iniciar"
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
+msgstr ""
+"DecidiĂł instalar el cargador de arranque en una particiĂłn.\n"
+"Esto implica que ya tiene un cargador de arranque en el disco desde el que "
+"arranca (ej.: System Commander).\n"
+"\n"
+"¿Desde qué disco arranca?"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "On boot"
-msgstr "Al iniciar"
+msgid "Tajik keyboard"
+msgstr "Teclado tajik"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No additional information\n"
-"about this service, sorry."
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
msgstr ""
-"No hay informaciĂłn adicional para\n"
-"este servicio. Disculpe."
+"Puede copiar la configuraciĂłn de la impresora que ha realizado para la cola %"
+"s a %s, su cola corriente. Todos los datos de configuraciĂłn (nombre de la "
+"impresora, descripciĂłn, ubicaciĂłn, tipo de conexiĂłn, y opciones "
+"predeterminadas) se transfieren, pero los trabajos de impresiĂłn no se "
+"transfieren.\n"
+"Debido a las siguientes razones no todas las colas se pueden transferir:\n"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Services and deamons"
-msgstr "Servicios y demonios"
+msgid "Font List"
+msgstr "Lista de tipografĂ­as"
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "stopped"
-msgstr "parado"
+msgid ""
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
+msgstr ""
+"Puede necesitar cambiar el dispositivo de arranque de Open Firmware para\n"
+" activar el cargador de arranque. Si no ve el prompt del cargador de\n"
+" arranque al reiniciar, mantenga presionado Command-Option-O-F al\n"
+" reiniciar e introduzca:\n"
+" setenv boot-device %s, \\\\:tbxi\n"
+" Luego escriba: shut-down\n"
+"La prĂłxima vez que arranque deberĂ­a ver el prompt del cargador de arranque."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "running"
-msgstr "corriendo"
+msgid ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
+msgstr ""
+"Parece que tiene una mĂĄquina desconocida o una OldWorld,\n"
+"El gestor de arranque yaboot no funcionarĂĄ en la misma.\n"
+"La instalaciĂłn continuarĂĄ, pero necesitarĂĄ\n"
+"utilizar BootX o alguna otra manera para arrancar su mĂĄquina"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Seleccione qué servicios se deben iniciar automåticamente al arrancar"
+msgid "Select file"
+msgstr "Elija un archivo"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Database Server"
-msgstr "Servidor de base de datos"
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
+msgstr ""
+"Elija la red o host donde se deberĂ­an hacer disponibles las impresoras "
+"locales:"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote Administration"
-msgstr "AdministraciĂłn remota"
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr ""
+"Estos comando también se utilizan en el campo \"Comando de impresión\" de "
+"los diĂĄlogos de impresiĂłn de muchas aplicaciones, pero aquĂ­ no se indica el "
+"nombre del archivo porque el archivo a imprimir lo proporciona la "
+"aplicaciĂłn.\n"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "File sharing"
-msgstr "Compartir archivos"
+msgid "Japan"
+msgstr "JapĂłn"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet"
-msgstr "Internet"
+msgid "Print option list"
+msgstr "Imprimir lista de opciones"
-#: ../../services.pm:1
+#: ../../standalone/localedrake:1
#, c-format
-msgid "Printing"
-msgstr "Imprimiendo"
+msgid "The change is done, but to be effective you must logout"
+msgstr "Se ha realizado el cambio, pero no se harĂĄ efectivo hasta que salga"
-#: ../../services.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Inicia el servidor de tipografĂ­as X11 (obligatorio para correr XFree)."
+msgid "Search servers"
+msgstr "Buscar servidores"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Carga los controladores para sus dispositivos USB."
+msgid "NCP queue name missing!"
+msgstr "ÂĄNo se encuentra la cola del servidor NCP!"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
+"Warning, another internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"Syslog es el servicio a través del que varios demonios van a enviar\n"
-"sus mensajes de registro, que syslog va a redirigir a varios archivos\n"
-"de registro(log). Es una buena idea ejecutar siempre syslog."
+"AtenciĂłn, se ha detectado otra conexiĂłn con la Internet, tal vez usando su "
+"red"
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Lanza el sistema de sonido en su mĂĄquina"
+msgid "Cd-Rom labeled \"%s\""
+msgstr "CD-ROM etiquetado como \"%s\""
#: ../../services.pm:1
#, c-format
msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
msgstr ""
-"El protocolo rwho permite que los usuarios remotos obtengan una lista\n"
-"de todos los usuarios conectados a una mĂĄquina que ejecuta el demonio rwho\n"
-"(similar al finger)."
+"Guarda y recupera el mecanismo de entropĂ­a del sistema; usado para la\n"
+"generaciĂłn de nĂșmeros aleatorios de gran calidad."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
msgstr ""
-"El protocolo rusers permite que los usuarios de una red identifiquen\n"
-"quien estĂĄ conectado en otras mĂĄquinas que respondan."
+"FallĂł la verificaciĂłn del sistema de archivos %s. ÂżDesea reparar los "
+"errores? (cuidado, puede perder datos)"
-#: ../../services.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"El protocolo rstat permite a los usuarios de una red recoger\n"
-"informaciĂłn sobre el rendimiento de cualquier mĂĄquina de dicha red."
+msgid "Turn your computer into a reliable server"
+msgstr "Convierta su mĂĄquina en un servidor confiable."
-#: ../../services.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"El demonio routed permite actualizar automĂĄticamente las tablas de "
-"enrutamiento IP\n"
-"gracias al protocolo RIP. Mientras que RIP se usa bastante en redes "
-"pequeñas,\n"
-"para redes mĂĄs complejas, se necesitan protocolos de enrutamiento mĂĄs "
-"complejos."
+msgid " (driver %s)"
+msgstr " (controlador %s)"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
+"Loopback file(s):\n"
+" %s\n"
msgstr ""
-"Asignar dispositivos 'crudos' a dispositivos de bloque (como las particiones "
-"de los discos), para usar aplicaciones como Oracle o reproductores DVD"
+"Archivo(s) de loopback:\n"
+" %s\n"
-#: ../../services.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Guarda y recupera el mecanismo de entropĂ­a del sistema; usado para la\n"
-"generaciĂłn de nĂșmeros aleatorios de gran calidad."
+msgid "I don't know"
+msgstr "No lo sé"
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix es un agente de transporte de correo (MTA), es decir el programa "
-"encargado de enviar el correo electrĂłnico de una mĂĄquina a otra."
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr ", host TCP/IP \"%s\", puerto %s"
-#: ../../services.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
msgstr ""
-"El portmapper gestiona las conexiones RPC; que usan protocolos como\n"
-"NFS y NIS. El servidor portmap se debe estar ejecutando en los sistemas que "
-"actĂșan\n"
-"como servidores para protocolos que usan el mecanismo RPC."
+"EstĂĄ a punto de configurar el un disquete de InstalaciĂłn AutomĂĄtica. Esta "
+"caracterĂ­stica es algo peligrosa y debe ser utilizada con cuidado.\n"
+"\n"
+"Con esa caracterĂ­stica, podrĂĄ repetir la instalaciĂłn que ha realizado en "
+"esta computadora, y se le consultarĂĄ interactivamente en algunos pasos, para "
+"poder cambiar los valores de los mismos.\n"
+"\n"
+"Para mĂĄxima seguridad, el particionado y formateado nunca serĂĄ realizado "
+"automĂĄticamente, sin importar lo que eligiĂł durante la instalaciĂłn de esta "
+"computadora.\n"
+"\n"
+"ÂżDesea continuar?"
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
msgstr ""
-"El soporte PCMCIA se usa por lo general para admitir cosas como tarjetas\n"
-"de red o mĂłdems en ordenadores portĂĄtiles. No se iniciarĂĄ salvo que\n"
-"esté configurado, por lo que no es un problema tenerlo instalado\n"
-"en mĂĄquinas que no lo necesiten."
-
-#: ../../services.pm:1
-#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Admitir las win-impresoras OKI 4w y compatibles."
+"\n"
+"\n"
+"Actualmente su tarjeta usa el controlador %s\"%s\" (el controlador predet. "
+"para su tarjeta es \"%s\")"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Activar el bloqueo numérico automåticamente bajo la consola y\n"
-"XFree al arrancar."
+msgid "Post Uninstall"
+msgstr "Post-desinstalaciĂłn"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS es un protocolo muy popular para compartir archivos en redes TCP/IP.\n"
-"Este servicio proporciona la funcionalidad de bloqueo de archivos por NFS."
+msgid " ("
+msgstr " ("
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS es un protocolo muy popular para compartir archivos en redes TCP/IP.\n"
-"Este servicio proporciona la funcionalidad de servidor NFS, que se "
-"configura\n"
-"a través del archivo /etc/exports."
+msgid "Cpuid level"
+msgstr "Nivel de cpuid"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Activa/desactiva todas las interfaces de red configuradas para iniciarse\n"
-"en el arranque del sistema."
+msgid "Mongolian (cyrillic)"
+msgstr "Mongol (cirĂ­lico)"
-#: ../../services.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Monta y desmonta todos los puntos de montaje de sistemas de archivos\n"
-"compartidos por medio de la red; como NFS (Network File System),\n"
-"SMB (Lan Manager/Windows) y NCP (Netware)"
+msgid "Add a module"
+msgstr "Agregar un mĂłdulo"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) es un servidor de nombres de dominio (DNS) usado para convertir "
-"los nombres de mĂĄquinas en direcciones IP."
+msgid "Profile to delete:"
+msgstr "Perfil a borrar:"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"El servidor virtual de Linux (LVS) se usa para construir servidores de alto\n"
-"rendimiento y alta disponibilidad."
+msgid "Local measure"
+msgstr "Medida local"
-#: ../../services.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd es el demonio de impresiĂłn, necesario para que lpr funcione\n"
-"correctamente. BĂĄsicamente, es un servidor que coloca las tareas de\n"
-"impresiĂłn en las colas de impresiĂłn adecuadas para cada impresora."
+msgid "busmouse"
+msgstr "ratĂłn bus"
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf a veces realizarĂĄ varias tareas al arrancar para\n"
-"mantener la configuraciĂłn del sistema."
+msgid "Account Login (user name)"
+msgstr "Usuario de la cuenta (nombre de usuario)"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "DetecciĂłn y configuraciĂłn automĂĄtica del hardware al arrancar."
+msgid "Fdiv bug"
+msgstr "Bug de Fdiv"
-#: ../../services.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
msgstr ""
-"RegeneraciĂłn automĂĄtica de la cabecera del nĂșcleo en /boot para\n"
-"/usr/include/linux/{autoconf,version}.h"
+"ConfiguraciĂłn de drakfirewall\n"
+"\n"
+"Debe asegurarse que ha configurado su acceso de Red/Internet con\n"
+"drakconnect antes de continuar."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Este paquete carga la definiciĂłn de teclado que se indica en\n"
-"/etc/sysconfig/keyboard. Puede ser configurado con el programa kbdconfig.\n"
-"Debe dejarse activo en la mayorĂ­a de las mĂĄquinas."
+msgid "Benin"
+msgstr "BenĂ­n"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Lanza el filtrado de paquetes para los nĂșcleos de Linux de la serie 2.2,\n"
-"para configurar un cortafuegos que protege a su mĂĄquina de los ataques de la "
-"red."
+msgid "Uruguay"
+msgstr "Uruguay"
-#: ../../services.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"El demonio para el superservidor de Internet (normalmente llamado inetd) "
-"inicia\n"
-"una variedad de servicios adicionales de internet segĂșn sea necesario.\n"
-"Es el responsable de iniciar varios servicios, incluyendo telnet, ftp, rsh\n"
-"y rlogin. Al desactivar inetd, se desactivan todos los servicios que "
-"dependen de Ă©l."
+msgid "Path selection"
+msgstr "SelecciĂłn de ruta"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache es un servidor de pĂĄginas web. Se usa para servir archivos HTML y "
-"programas CGI."
+msgid "Name/IP address of host:"
+msgstr "Nombre/direcciĂłn IP del host:"
-#: ../../services.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake lanza una prueba del hardware, y opcionalmente configura\n"
-"el hardware nuevo/cambiado."
+msgid "Monitor: %s\n"
+msgstr "Monitor: %s\n"
-#: ../../services.pm:1
+#: ../../partition_table/raw.pm:1
#, c-format
msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
msgstr ""
-"GPM añade soporte del ratón para los programas Linux en modo texto, como\n"
-"el Midnight Commander. También permite operaciones de cortar-y-pegar con\n"
-"el ratĂłn en la consola, e incluye soporte para menĂșs emergentes en la "
-"consola."
+"EstĂĄ ocurriendo algo malo en su unidad. \n"
+"Ha fallado una prueba para verificar la integridad de los datos. \n"
+"Esto significa que escribir cualquier cosa en el disco terminarĂĄ produciendo "
+"datos aleatorios, corruptos."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron es un programa UNIX estĂĄndar que ejecuta programas especificados por\n"
-"el usuario periódicamente. El cron de Vixie añade varias funcionalidades al "
-"cron de Unix \n"
-"bĂĄsico, incluyendo una mayor seguridad y opciones de configuraciĂłn mĂĄs "
-"potentes."
+msgid "Printer host name or IP missing!"
+msgstr "ÂĄFalta el nombre de host o la IP de la impresora!"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
+msgid "Please check all users that you want to include in your backup."
msgstr ""
-"Ejecuta los comandos programados por el comando at en el momento\n"
-"especificado al lanzar at, y ejecuta comandos por lotes (batch) cuando\n"
-"la carga promedio del sistema es suficientemente baja."
+"Por favor, marque a todos los usuarios que desa incluir en la copia de "
+"respaldo"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
msgstr ""
-"apmd se usa para monitorizar el estado de las baterĂ­as y enviar esa\n"
-"información a syslogd. También puede usarse para apagar el equipo cuando\n"
-"la baterĂ­a estĂĄ casi descargada."
-
-#: ../../services.pm:1
-#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron, un planificador de comandos periĂłdicos."
+"Printerdrake debe configurar el %s.\n"
+"Puede lanzar printerdrake desde el Centro de control de Mandrake en la "
+"secciĂłn Hardware."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-"Lanzar el sistema de sonido ALSA (Arquitectura avanzada de sonido de Linux)"
+msgid "Bangladesh"
+msgstr "Bangladesh"
-#: ../../standalone.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Installing packages..."
-msgstr "Instalando paquetes..."
+msgid "Japan (cable)"
+msgstr "JapĂłn (cable)"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
"\n"
-"Uso: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--testing] "
-"[-v|--version] "
+"Bienvenido al Asistente de configuraciĂłn de la impresora\n"
+"\n"
+"Este asistente lo ayudarĂĄ a instalar sus impresoras conectadas a esta "
+"computadora, conectadas directamente a la red o a una mĂĄquina Windows "
+"remota.\n"
+"\n"
+"Si tiene impresoras conectadas a esta måquina, por favor enciéndalas para "
+"que se puedan detectar automåticamente. También deben estar conectadas y "
+"encendidas sus impresoras de red y sus mĂĄquinas Windows.\n"
+"\n"
+"Note que la detecciĂłn automĂĄtica de impresoras en la red toma mĂĄs tiempo que "
+"sĂłlo detectar las impresoras conectadas a esta mĂĄquina. Entonces, desactive "
+"la detecciĂłn automĂĄtica de impresoras de red o en mĂĄquinas Windows cuando no "
+"la necesita.\n"
+"\n"
+"Haga clic sobre \"Siguiente\" cuando esté listo, o sobre \"Cancelar\" si "
+"Usted no desea configurar sus impresoras ahora."
-#: ../../standalone.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
-msgstr ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resoluciĂłn"
+msgid "Initial tests"
+msgstr "Pruebas iniciales"
-#: ../../standalone.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
-"[--manual] [--device=disp.] [--update-sane=dir_fuente_sane] [--update-"
-"usbtable] [--dynamic=disp.]"
+msgid "Continue"
+msgstr "Continuar"
-#: ../../standalone.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Custom Restore"
+msgstr "RestauraciĂłn personalizada"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
msgstr ""
-"[OPCIÓN]...\n"
-" --no-confirmation no pedir confirmaciĂłn en modo MandrakeUpdate\n"
-" --no-verify-rpm no verificar firmas de los paquetes\n"
-" --changelog-first mostrar changelog antes de lista de archivos en "
-"ventana de descripciĂłn\n"
-" --merge-all-rpmnew proponer mezclar todos los archivos .rpmnew/.rpmsave "
-"encontrados"
+"\"%s\": si se detecta una tarjeta de sonido en su sistema, la misma se\n"
+"muestra aquĂ­. Si nota que la tarjeta de sonido mostrada no es la que estĂĄ\n"
+"realmente instalada en su sistema, puede hacer clic sobre el botĂłn y elegir\n"
+"otro controlador."
-#: ../../standalone.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr "[--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "Script-based"
+msgstr "Por script"
-#: ../../standalone.pm:1
+#: ../../install_any.pm:1 ../../partition_table.pm:1
#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
-msgstr ""
-"[OPCIONES]\n"
-"AplicaciĂłn de monitoreo y conexiĂłn de Internet y redes\n"
-"\n"
-"--defaultintf interfaz : mostar esta interfaz por defecto\n"
-"--connect : conectar a la Internet si no estĂĄ conectado\n"
-"--disconnect : desconectar de la Internet si estĂĄ conectado\n"
-"--force : utilizado con (dis)connect: forzar (des)conexiĂłn.\n"
-"--status : devuelve 1 si estĂĄ conectado, 0 en caso "
-"contrario.\n"
-"--quiet : no ser interactivo. A utilizar con (dis)connect."
+msgid "Error reading file %s"
+msgstr "Error al leer el archivo %s"
-#: ../../standalone.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr "[--file=miarchivo] [--word=mipalabra] [--explain=regexp] [--alert]"
+msgid "PLL setting:"
+msgstr "ConfiguraciĂłn del PLL :"
-#: ../../standalone.pm:1
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
#, c-format
-msgid "[keyboard]"
-msgstr "[teclado]"
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "Debe tener una particiĂłn FAT montada en /boot/efi"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
-msgstr ""
-"[OPCIONES]...\n"
-"Configurador del Servidor de Terminales de Mandrake (MTS)\n"
-"--enable : habilitar MTS\n"
-"--disable : deshabilitar MTS\n"
-"--start : iniciar MTS\n"
-"--stop : detener MTS\n"
-"--adduser : añadir usuario existente a MTS (necesita "
-"nombre_de_usuario)\n"
-"--deluser : quitar usuario existente de MTS (necesita "
-"nombre_de_usaurio)\n"
-"--addclient : añadir måquina cliente a MTS (necesita dirección MAC, IP, "
-"nombre imagen nbi)\n"
-"--delclient : quitar mĂĄquina cliente de MTS (necesita direcciĂłn MAC, "
-"IP, nombre imagen nbi)"
+msgid " on "
+msgstr " en "
-#: ../../standalone.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
-msgstr ""
-"AplicaciĂłn de importaciĂłn y monitoreo de tipografĂ­as\n"
-"--windows_import : importar desde todas las particiones Windows "
-"disponibles.\n"
-"--xls_fonts : mostrar todas las tipografĂ­as que ya existen en xls\n"
-"--strong : verificaciĂłn fuerte de las tipografĂ­as.\n"
-"--install : aceptar cualquier tipografĂ­a o directorio de "
-"tipografĂ­as.\n"
-"--uninstall : desinstalar cualquier tipografĂ­a o directorio de tipog.\n"
-"--replace : reemplazar las tipografĂ­as si ya existen.\n"
-"--application : 0 ninguna aplicaciĂłn.\n"
-" : 1 todas las aplicaciones soportadas disponibles.\n"
-" : nombre_de_aplicaciĂłn como por ej. so para staroffice\n"
-" y gs para ghostscript."
+msgid "The URL must begin with http:// or https://"
+msgstr "La URL deberĂ­a empezar con http:// o https://"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
msgstr ""
-"[OPCIONES] [NOMBRE_PROGRAMA]\n"
-"\n"
-"OPCIONES:\n"
-" --help - imprime este mensaje.\n"
-" --report - programa deberĂ­a ser una herramienta mandrake\n"
-" --incident - programa deberĂ­a ser una herramienta mandrake"
+"Puede especificar directamente el URI para acceder a la impresora. El URI "
+"debe cumplir con las especificaciones Foomatic o CUPS. Recuerde que no todos "
+"los sistemas de impresiĂłn admiten URIs."
+
+#: ../../any.pm:1
+#, c-format
+msgid "Other OS (SunOS...)"
+msgstr "Otro SO (SunOS...)"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Install/Upgrade"
+msgstr "InstalaciĂłn/ActualizaciĂłn"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "%d packages"
+msgstr "%d paquetes"
#: ../../standalone.pm:1
#, c-format
@@ -7550,4905 +6944,5391 @@ msgstr ""
"--help : muestra este mensaje.\n"
"--version : muestra el nĂșmero de versiĂłn.\n"
-#: ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Domain Authentication Required"
+msgstr "Se necesita autenticaciĂłn de dominio"
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
msgstr ""
-" Este programa es software libre; puede redistribuirlo y/o modificarlo\n"
-" bajo los tĂ©rminos de la Licencia PĂșblica General GNU publicada por la\n"
-" Free Software Foundation; ya sea la versiĂłn 2, o (a su opciĂłn) cualquier\n"
-" versiĂłn posterior.\n"
"\n"
-" Este programa se distribuye con la esperanza que serĂĄ Ăștil, pero\n"
-" SIN GARANTÍA ALGUNA; incluso sin la garantía implícita de COMERCIABILIDAD\n"
-" o ADECUABILIDAD PARA UN PROPÓSITO PARTICULAR. Consulte la\n"
-" Licencia PĂșblica General GNU para mĂĄs detalles.\n"
"\n"
-" DeberĂ­a haber recibido una copia de la Licencia PĂșblica General GNU\n"
-" junto con este programa; de no ser asĂ­, escriba a la Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Exit install"
-msgstr "Salir de la instalaciĂłn"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Install updates"
-msgstr "Instalar actualizaciones"
+" Gracias:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
-#: ../../steps.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Configure services"
-msgstr "Servicios al inicio"
+msgid "Costa Rica"
+msgstr "Costa Rica"
-#: ../../steps.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Configure X"
-msgstr "ConfiguraciĂłn de X"
+msgid "Use libsafe for servers"
+msgstr "Utilizar libsafe para los servidores"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Install bootloader"
-msgstr "Cargador de arranque"
+msgid "Icelandic"
+msgstr "Islandés"
-#: ../../steps.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Configure networking"
-msgstr "Configurar la red"
+msgid ""
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
+"\n"
+"Uso: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--testing] "
+"[-v|--version] "
-#: ../../steps.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Add a user"
-msgstr "Añadir un usuario"
+msgid "Please relog into %s to activate the changes"
+msgstr "Abra de nuevo una sesiĂłn %s para activar los cambios"
-#: ../../steps.pm:1
+#: ../../my_gtk.pm:1
#, c-format
-msgid "Root password"
-msgstr "Contraseña de root"
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-#: ../../steps.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Install system"
-msgstr "Instalar el sistema"
+msgid "Lilo/grub mode"
+msgstr "Modo de Lilo/Grub"
-#: ../../steps.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Choose packages to install"
-msgstr "Elija los paquetes a instalar"
+msgid "Output"
+msgstr "Salida"
-#: ../../steps.pm:1
+#: ../../loopback.pm:1
#, c-format
-msgid "Format partitions"
-msgstr "Formateo de particiones"
+msgid "Circular mounts %s\n"
+msgstr "Montajes circulares %s\n"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Partitioning"
-msgstr "Particionando"
+msgid "Martinique"
+msgstr "Martinica"
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose your keyboard"
-msgstr "Elija su teclado"
+msgid "HardDrive / NFS"
+msgstr "Disco rĂ­gido / NFS"
-#: ../../steps.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Select installation class"
-msgstr "Tipo de instalaciĂłn"
+msgid "a number"
+msgstr "un nĂșmero"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Hard drive detection"
-msgstr "DetecciĂłn del disco rĂ­gido"
+msgid "Swedish"
+msgstr "Sueco"
-#: ../../steps.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Configure mouse"
-msgstr "ConfiguraciĂłn del ratĂłn"
+msgid "Which %s driver should I try?"
+msgstr "¿Qué controlador de %s debo probar?"
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "License"
-msgstr "Licencia"
+msgid ""
+"You will receive an alert if one of the selected services is no longer "
+"running"
+msgstr ""
+"RecibirĂĄ una alerta si alguno de ls servicios seleccionados ya no estĂĄ "
+"corriendo"
-#: ../../steps.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Language"
-msgstr "Elija su idioma"
+msgid "Filesystem types:"
+msgstr "Tipos de sistemas de archivos:"
-#: ../../ugtk2.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "utopia 25"
-msgstr "utopia 25"
+msgid ", multi-function device on HP JetDirect"
+msgstr ", dispositivo multifunciĂłn en HP JetDirect"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "OK"
-msgstr "Aceptar"
+msgid "Northern Mariana Islands"
+msgstr "Islas Marianas del Norte"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "logdrake"
-msgstr "logdrake"
+msgid "none"
+msgstr "ninguno"
-#: ../../ugtk.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgid "user :"
+msgstr "usuario :"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (instalaciĂłn del controlador de la pantalla)"
+msgid "Please enter your password"
+msgstr "Por favor, ingrese su contraseña"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
msgstr ""
-"Su tarjeta puede admitir aceleraciĂłn 3D por hardware con XFree %s,\n"
-"ADVIERTA QUE ESTO ES EXPERIMENTAL Y PUEDE COLGAR SU ORDENADOR."
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s con aceleraciĂłn 3D EXPERIMENTAL por hardware"
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Su tarjeta puede admitir aceleraciĂłn 3D por hardware con XFree %s."
+"Nombre del perfil a crear (el perfil nuevo se crea como copia del actual):"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s con aceleraciĂłn 3D por hardware"
+msgid "Floppy"
+msgstr "Disquete"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Su tarjeta sĂłlo puede admitir aceleraciĂłn de 3D por hardware con XFree %s,\n"
-"ADVIERTA QUE ESTO ES EXPERIMENTAL Y PUEDE COLGAR SU ORDENADOR.\n"
-"XFree %s admite su tarjeta y puede tener un mejor comportamiento en 2D."
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "Por favor, marque si desea borrar su soporte regrabable (1er. sesiĂłn)"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Su tarjeta puede admitir aceleraciĂłn 3D pero sĂłlo con XFree %s.\n"
-"XFree %s admite su tarjeta y puede tener mejor comportamiento en 2D."
+msgid "Ghostscript referencing"
+msgstr "Referenciando a Ghostscript"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
+msgid "Bootloader"
+msgstr "Cargador de arranque"
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Configurar sĂłlo la tarjeta \"%s\"%s"
+msgid "Move"
+msgstr "Desplazar"
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Use Xinerama extension"
-msgstr "Usar extensiĂłn Xinerama"
+msgid "Bootloader to use"
+msgstr "Cargador de arranque a usar"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configure all heads independently"
-msgstr "Configurar los monitores independientemente"
+msgid "SMB server host"
+msgstr "MĂĄquina del servidor SMB"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "¿Qué tipo de configuración de XFree desea tener?"
+msgid "Name Servers:"
+msgstr "Servidores de nombres:"
-#: ../../Xconfig/card.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "XFree configuration"
-msgstr "ConfiguraciĂłn de XFree"
+msgid ""
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
+msgstr ""
+"\n"
+"Importante\n"
+"\n"
+"Haga el favor de leer cuidadosamente el presente documento. En caso de "
+"desacuerdo\n"
+"con el presente documento, no estĂĄ autorizado a instalar los demĂĄs\n"
+"CD. En este caso seleccione 'Rechazar' para seguir la instalaciĂłn sin\n"
+"estos CD.\n"
+"\n"
+"\n"
+"Algunos componentes de software contenidos en los siguientes CD no\n"
+"estĂĄn sometidos a las licencias GPL o similares que permitan la copia,\n"
+"adaptaciĂłn o redistribuciĂłn. Cada uno de los componentes de software\n"
+"esta distribuido bajo los términos y condiciones de un acuerdo de\n"
+"licencia propio. Por favor, diråjase a éste y acéptelo antes de instalarlo,\n"
+"usarlo o redistribuirlo. Generalmente, estas licencias no autorizan la\n"
+"copia (salvo las destinadas a copias de seguridad), la distribuciĂłn, "
+"descompilaciĂłn,\n"
+"desensamblado, ingenierĂ­a inversa, reconstituciĂłn de la lĂłgica del\n"
+"programa y/o modificaciĂłn, salvo en la medida y para las necesidades\n"
+"autorizadas por las leyes vigentes. Toda violaciĂłn de la licencia\n"
+"vigente implica generalmente la caducidad de estĂĄ, sin perjuicio a\n"
+"todos los demĂĄs derechos o acciones dirigidos en contra de Ud. Salvo si\n"
+"el acuerdo de licencia lo autoriza, no puede instalar estos programas\n"
+"en mĂĄs de una mĂĄquina, ni adaptarlos para un uso en red. Si fuese\n"
+"necesario, contacte con el distribuidor de cada programa para\n"
+"obtener licencias adicionales. La distribuciĂłn a terceros de copias de\n"
+"los programas o de la documentación que lo acompaña generalmente\n"
+"suele estar prohibida.\n"
+"\n"
+"\n"
+"Todos los derechos, tĂ­tulos e intereses de esos programas son la\n"
+"propiedad exclusiva de sus autores respectivos y estĂĄn protegidos por el\n"
+"derecho de la propiedad intelectual y otras leyes aplicables al derecho\n"
+"del software.\n"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Seleccione la cantidad de memoria de su tarjeta grĂĄfica"
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Quitar esta impresora de Star Office/OpenOffice.org/GIMP"
-#: ../../Xconfig/card.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
msgstr ""
-"Su sistema soporta configuraciĂłn multi-monitor.\n"
-"¿Qué desea hacer?"
+"El servidor virtual de Linux (LVS) se usa para construir servidores de alto\n"
+"rendimiento y alta disponibilidad."
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Multi-head configuration"
-msgstr "ConfiguraciĂłn multi-monitor"
+msgid "4 billion colors (32 bits)"
+msgstr "4 billones de colores (32 bits)"
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose an X server"
-msgstr "Seleccione un servidor X"
+msgid "Micronesia"
+msgstr "Micronesia"
-#: ../../Xconfig/card.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "X server"
-msgstr "Servidor X"
+msgid "License"
+msgstr "Licencia"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "64 MB or more"
-msgstr "64 MB o mĂĄs"
+msgid "This may take a moment to generate the keys."
+msgstr "La generaciĂłn de claves puede tardar unos momentos."
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "32 MB"
-msgstr "32 MB"
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgstr ""
+"DetecciĂłn automĂĄtica de impresora (Impresoras locales, TCP/Socket, y SMB)"
-#: ../../Xconfig/card.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "16 MB"
-msgstr "16 MB"
+msgid "Sagem (using pppoa) usb"
+msgstr "Sagem (usando pppoa) usb"
-#: ../../Xconfig/card.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "8 MB"
-msgstr "8 MB"
+msgid ""
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
+msgstr ""
+"OcurriĂł un error - no se encontrĂł ningĂșn dispositivo vĂĄlido para crear los "
+"nuevos sistemas de archivos. Por favor, verifique su equipo para saber la "
+"razĂłn de este fallo"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "4 MB"
-msgstr "4 MB"
+msgid "Starting the printing system at boot time"
+msgstr "Iniciar el sistema de impresiĂłn al arrancar"
-#: ../../Xconfig/card.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "2 MB"
-msgstr "2 MB"
+msgid "Do you want to start the connection at boot?"
+msgstr "ÂżDesea iniciar su conexiĂłn al arrancar?"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "1 MB"
-msgstr "1 MB"
+msgid "Processor ID"
+msgstr "ID del procesador"
-#: ../../Xconfig/card.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "512 kB"
-msgstr "512 KB"
+msgid "Sound trouble shooting"
+msgstr "SoluciĂłn de problemas de sonido"
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "256 kB"
-msgstr "256 KB"
+msgid "Polish (qwerty layout)"
+msgstr "Polaco (distribuciĂłn qwerty)"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "activate now"
+msgstr "activar ahora"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
"\n"
-"%s"
+"Drakbackup activities via CD:\n"
+"\n"
msgstr ""
-"ÂżConservar los cambios?\n"
-"La configuraciĂłn actual es:\n"
"\n"
-"%s"
+"Actividades de Drakbackup por medio de CD:\n"
+"\n"
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Options"
-msgstr "Opciones"
+msgid ""
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
+msgstr ""
+"Va a instalar el sistema de impresiĂłn %s sobre un sistema corriendo en el "
+"nivel de seguridad %s.\n"
+"\n"
+"Este sistema de impresiĂłn ejecuta un demonio (proceso en segundo plano) que "
+"espera trabajos de impresiĂłn y los gestiona. Las mĂĄquinas remotas pueden "
+"acceder también a este demonio a través de la red, así que es un potencial "
+"punto de ataque. Por eso, sĂłlo unos pocos demonios seleccionados se inician "
+"por defecto en este nivel de seguridad.\n"
+"\n"
+"ÂżSeguro que desea configurar la impresiĂłn para esta mĂĄquina?"
-#: ../../Xconfig/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Test"
-msgstr "Probar"
+msgid "Host \"%s\", port %s"
+msgstr "Host \"%s\", puerto %s"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Resolution"
-msgstr "ResoluciĂłn"
+msgid "This partition can't be used for loopback"
+msgstr "Esta particiĂłn no puede usarse para el loopback"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Monitor"
-msgstr "Monitor"
+msgid "File already exists. Use it?"
+msgstr "El archivo ya existe. ÂżDesea usarlo?"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Graphic Card"
-msgstr "Tarjeta grĂĄfica"
+msgid "received: "
+msgstr "recibido: "
-#: ../../Xconfig/monitor.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Vertical refresh rate"
-msgstr "Frecuencia de barrido vertical"
+msgid "Right Alt key"
+msgstr "Tecla Alt derecha"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Frecuencia de barrido horizontal"
+msgid "the list of alternative drivers for this sound card"
+msgstr "la lista de controladores alternativos para esta tarjeta de sonido"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Los dos parĂĄmetros crĂ­ticos son la frecuencia de barrido vertical, que "
-"indica la frecuencia\n"
-"a la cual se refresca la pantalla entera, y mĂĄs importante aĂșn, la "
-"frecuencia de sincronizaciĂłn\n"
-"horizontal, la cual es la frecuencia de las lĂ­neas de barrido horizontal.\n"
-"\n"
-"Es MUY IMPORTANTE que no especifique un tipo de monitor con una\n"
-"frecuencia de sincronizaciĂłn superior a la capacidad real de su monitor:\n"
-"puede dañar su monitor.\n"
-" En caso de duda, elija una configuraciĂłn conservadora."
+msgid "Gateway"
+msgstr "Pasarela"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr "FallĂł la prueba Plug'n Play. Por favor, elija un monitor especĂ­fico"
+msgid "Scanner sharing"
+msgstr "Compartir escĂĄner"
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Vendor"
-msgstr "Fabricante"
+msgid "Tonga"
+msgstr "Tonga"
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Plug'n Play"
-msgstr "Plug'n Play"
+msgid "Tunisia"
+msgstr "Tunicia"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose a monitor"
-msgstr "Elija un monitor"
+msgid "Profile: "
+msgstr "Perfil: "
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Graphics card: %s"
-msgstr "Tarjeta grĂĄfica: %s"
+msgid ""
+"Click on a device in the left tree in order to display its information here."
+msgstr ""
+"Haga clic sobre un dispositivo en el ĂĄrbol de la izquierda para obtener aquĂ­ "
+"informaciĂłn sobre el mismo."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Elija la resoluciĂłn y la profundidad de colores"
+msgid "XawTV isn't installed!"
+msgstr "ÂĄXawTV no estĂĄ instalado!"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Resolutions"
-msgstr "Resoluciones"
+msgid ""
+"Create/Transfer\n"
+"backup keys for SSH"
+msgstr ""
+"Crear/Transferir\n"
+"claves de respaldo para SSH"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 billones de colores (32 bits)"
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr "No incluir archivos crĂ­ticos (passwd, group, fstab)"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 millones de colores (24 bits)"
+msgid "old static device name used in dev package"
+msgstr "nombre antiguo de dispositivo estĂĄtico utilizado en el paquete dev"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mil colores (16 bits)"
+msgid "This label is already used"
+msgstr "Esta etiqueta ya estĂĄ en uso"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mil colores (15 bits)"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"Bienvenido al Asistente de configuraciĂłn de Impresoras\n"
+"\n"
+"Este asistente lo ayudarĂĄ a instalar sus impresoras conectadas a esta "
+"computadora o conectadas directamente a la red.\n"
+"\n"
+"Si tiene impresoras conectadas a esta måquina, por favor enciéndalas para "
+"que se puedan detectar automåticamnte. También deberían estar conectadas y "
+"encendidas sus impresoras de red.\n"
+"\n"
+"Note que la detecciĂłn automĂĄtica de las impresoras de red toma mĂĄs tiempo "
+"que sĂłlo la detecciĂłn automĂĄtica de las impresoras conectadas a esta "
+"mĂĄquina. Entonces, desactive la detecciĂłn automĂĄtica de las impresoras de "
+"red si no lo necesita.\n"
+"\n"
+"Haga clic sobre \"Siguiente\" cuando esté listo, o sobre \"Cancelar\" si "
+"Usted no desea configurar sus impresoras ahora."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 colores (8 bits)"
+msgid "After formatting partition %s, all data on this partition will be lost"
+msgstr "Se perderån todos los datos de la partición %s después de formatearla"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Is this the correct setting?"
-msgstr "ÂżEs esta la configuraciĂłn correcta?"
+msgid "Connection Time: "
+msgstr "Tiempo de conexiĂłn: "
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Saliendo en %d segundos"
+msgid "select perm file to see/edit"
+msgstr "seleccionar archivo a ver/editar"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/livedrake:1
#, c-format
msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
-"OcurriĂł un error:\n"
-"%s\n"
-"Intente cambiar algunos parĂĄmetros"
-
-#: ../../Xconfig/test.pm:1
-#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Advertencia: probar esta tarjeta de vĂ­deo puede colgar su computadora"
+"Por favor, inserte el CD-ROM de la instalaciĂłn en su unidad y presione "
+"Aceptar.\n"
+"Si no lo tiene, presione Cancelar para evitar la actualizaciĂłn en vivo."
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "ÂżDesea probar la configuraciĂłn?"
+msgid "Use group id for execution"
+msgstr "Usar ID del grupo para la ejecuciĂłn"
-#: ../../Xconfig/test.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Test of the configuration"
-msgstr "Probar la configuraciĂłn"
+msgid "Choose the default user:"
+msgstr "Elija el usuario predeterminado:"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "What norm is your TV using?"
-msgstr "¿Qué norma estå utilizando su TV?"
+msgid "Gabon"
+msgstr "GabĂłn"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
msgstr ""
-"Parece que su tarjeta grĂĄfica tiene un conector de salida para TV.\n"
-"Se puede configurar para trabajar con el frame-buffer.\n"
"\n"
-"Para esto Usted tiene que conectar su tarjeta grĂĄfica a su TV antes de "
-"arrancar su computadora.\n"
-"Luego, elija la entrada \"TVout\" en el cargador de arranque\n"
-"\n"
-"ÂżTiene Usted esta caracterĂ­stica?"
+"AquĂ­ no tiene que configurar las impresoras en los servidores CUPS remotos; "
+"las mismas se detectarĂĄn automĂĄticamente."
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
msgstr ""
-"Puede configurar su computadora para que inicie X automĂĄticamente\n"
-"al arrancar. ÂżDesea que se lance X cuando reinicie?"
-
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "X al arrancar"
+"Mandrake Linux puede soportar mĂșltiples idiomas. Seleccione\n"
+"los que desea instalar. Los mismos estarĂĄn disponibles cuando\n"
+"su instalación esté completa y Usted reinicie su sistema."
-#: ../../Xconfig/various.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Controlador XFree86: %s\n"
+msgid "Domain"
+msgstr "Dominio"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Servidor XFree86: %s\n"
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "Precise el tamaño de la RAM si es necesario (se encontraron %d MB)"
-#: ../../Xconfig/various.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Resolution: %s\n"
-msgstr "ResoluciĂłn: %s\n"
+msgid ""
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
+"\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
+"\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
+msgstr ""
+"LILO y grub son cargadores de arranque para GNU/Linux. Normalmente esta\n"
+"etapa estĂĄ completamente automatizada. DrakX analizarĂĄ el sector de\n"
+"arranque del disco y actuarĂĄ en funciĂłn de lo que encuentre allĂ­:\n"
+"\n"
+" * si encuentra un sector de arranque de Windows, lo reemplazarĂĄ con un\n"
+"sector de arranque de grub/LILO de forma tal que Usted pueda cargar\n"
+"GNU/Linux u otro sistema operativo;\n"
+"\n"
+" * si encuentra un sector de arranque de grub o LILO, lo reemplazarĂĄ con\n"
+"uno nuevo;\n"
+"\n"
+"Si no puede realizar una determinaciĂłn, DrakX le preguntarĂĄ dĂłnde colocar\n"
+"el cargador de arranque."
-#: ../../Xconfig/various.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Color depth: %s\n"
-msgstr "Profundidad de color: %s\n"
+msgid "Provider dns 2 (optional)"
+msgstr "DNS 2 del proveedor (opcional)"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Memoria de la tarjeta grĂĄfica: %s KB\n"
+msgid "Boot device"
+msgstr "Dispositivo de arranque"
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Tarjeta grĂĄfica: %s\n"
+msgid "Which partition do you want to resize?"
+msgstr "¿A qué partición desea cambiarle el tamaño?"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Frecuencia vertical del monitor: %s\n"
+msgid "United States Minor Outlying Islands"
+msgstr "Islas Circundantes Menores de los Estados Unidos"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Frecuencia horizontal del monitor: %s\n"
+msgid "A tool to monitor your logs"
+msgstr "Una herramienta para ver sus archivos de registro (logs)"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
+msgid "Djibouti"
+msgstr "Djibuti"
-#: ../../Xconfig/various.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Dispositivo del ratĂłn: %s\n"
+msgid "detected on port %s"
+msgstr "detectada en el puerto %s"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tipo de ratĂłn: %s\n"
+msgid "LPD"
+msgstr "LPD"
#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "DistribuciĂłn del teclado: %s\n"
+msgid "Graphics card: %s\n"
+msgstr "Tarjeta grĂĄfica: %s\n"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Options: %s"
-msgstr "Opciones: %s"
+msgid "Yaboot"
+msgstr "Yaboot"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mount point: "
-msgstr "Punto de montaje: "
+msgid "Please check if you are using a DVDRAM device"
+msgstr "Por favor, marque si estĂĄ utilizando un dispositivo DVDRAM"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Server: "
-msgstr "Servidor: "
+msgid "Splash selection"
+msgstr "SelecciĂłn de Splash"
-#: ../../diskdrake/dav.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "La URL deberĂ­a empezar con http:// o https://"
+msgid "Extended partition not supported on this platform"
+msgstr "La particiĂłn extendida no estĂĄ disponible en esta plataforma"
-#: ../../diskdrake/dav.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Por favor, ingrese la URL del servidor WebDAV"
+msgid "ISDN Configuration"
+msgstr "ConfiguraciĂłn de RDSI"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mount point"
-msgstr "Punto de montaje"
+msgid "high"
+msgstr "Alta"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Server"
-msgstr "Servidor"
+msgid "Internet Connection Sharing"
+msgstr "Compartir la conexiĂłn a Internet"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Mount"
-msgstr "Montar"
+msgid "Choose file"
+msgstr "Elija un archivo"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Unmount"
-msgstr "Desmontar"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
+msgstr ""
+"ÂĄAtenciĂłn! Se ha detectado la configuraciĂłn del cortafuegos existente. Puede "
+"que necesite algĂșn ajuste manual tras la instalaciĂłn."
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New"
-msgstr "Nuevo"
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "Acceso de tarjetas de Impresora/Foto en \"%s\""
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
msgstr ""
-"WebDAV es un protocolo que le permite montar localmente un directorio de un\n"
-"servidor web, y tratarlo como un sistema de archivos local (siempre y "
-"cuando\n"
-"el servidor web estå configurado como servidor WebDAV). Si desea añadir\n"
-"puntos de montaje WebDAV, seleccione \"Nuevo\"."
+"ÂżDesea habilitar la impresiĂłn en las impresoras mencionadas arriba o en las "
+"impresoras en la red local?\n"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Use \"%s\" en su lugar"
+msgid "Printer default settings"
+msgstr "Configuraciones predeterminadas de la impresora"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Type"
-msgstr "Tipo"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Ratón genérico PS2 con rueda"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Use \"Desmontar\" primero"
+msgid "Removing old printer \"%s\"..."
+msgstr "Quitando la impresora antigua \"%s\" ..."
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Delete"
-msgstr "Borrar"
+msgid "Select a device !"
+msgstr "ÂĄSeleccione un dispositivo!"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create"
-msgstr "Crear"
+msgid "Remove selected server"
+msgstr "Quitar servidor seleccionado"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Filesystem types:"
-msgstr "Tipos de sistemas de archivos:"
+msgid "French Southern Territories"
+msgstr "Terrotorios Franceses del Sur"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Empty"
-msgstr "VacĂ­o"
+msgid "the vendor name of the processor"
+msgstr "el nombre del fabricante del procesador"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Windows"
-msgstr "Windows"
+msgid "All data on this partition should be backed-up"
+msgstr ""
+"DeberĂ­a hacer una copia de seguridad de todos los datos de esta particiĂłn"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "Installing package %s"
+msgstr "Instalando el paquete %s"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "Checking device and configuring HPOJ..."
+msgstr "Verificando dispositivo y configurando HPOJ..."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Swap"
-msgstr "Intercambio"
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
+msgstr ""
+"Por favor, para tener mĂĄs particiones borre alguna para poder crear una "
+"particiĂłn extendida"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Journalised FS"
-msgstr "S. de a. con journal"
+msgid ""
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
+msgstr ""
+"Su impresora se configurĂł automĂĄticamente para darle acceso a las unidades "
+"de tarjetas de fotos desde su PC. Ahora puede acceder a sus tarjetas de "
+"fotos utilizando el programa grĂĄfico \"MtoolsFM\" (MenĂș: \"Aplicaciones\" -> "
+"\"Herramientas de Archivo\" -> \"Administrador de archivos MTools\") o los "
+"utilitarios \"mtools\" de lĂ­nea de comandos (teclee \"man mtools\" para mĂĄs "
+"informaciĂłn). EncontrarĂĄ el sistema de archivos de la tarjeta bajo la letra "
+"de unidad \"p:\", o letras de unidad subsiguientes cuando tiene mĂĄs de una "
+"impresora HP con unidades de tarjetas de fotos. En \"MtoolsFM\" puede "
+"cambiar entre las letras de unidad con el campo en la esquina superior "
+"derecha de la lista de archivos."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Ext2"
-msgstr "Ext2"
+msgid "Choose packages to install"
+msgstr "Elija los paquetes a instalar"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No hard drives found"
-msgstr "ÂĄNo se encontraron discos rĂ­gidos!"
+msgid ""
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
+msgstr ""
+"\n"
+" Algunos errores con sendmail son causados por\n"
+" una configuraciĂłn mala de postfix. Para resolverlo tiene\n"
+" que configurar myhostname o mydomain en /etc/postfix/main.cf\n"
+"\n"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Please click on a partition"
-msgstr "Por favor, haga clic sobre una particiĂłn"
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr "Se perderĂĄn TODAS las particiones y sus datos en la unidad %s"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
msgstr ""
-"Tiene una partición Microsoft Windows de gran tamaño.\n"
-"Le sugiero que primero cambie el tamaño de la misma\n"
-"(para eso haga clic sobre ella, y luego sobre \"Redimensionar\")"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Choose action"
-msgstr "Elija una acciĂłn"
+"Su sistema no tiene espacio suficiente para instalar o actualizar (%d > %d)"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Wizard"
-msgstr "Asistente"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
+msgstr ""
+"Cada impresora necesita un nombre (por ejemplo, \"impresora\"). No tiene por "
+"qué rellenar los campos Descripción ni Ubicación. Son comentarios para los "
+"usuarios."
-#: ../../diskdrake/hd_gtk.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
msgstr ""
-"Si piensa usar aboot, no olvide dejar espacio libre (2048 sectores es\n"
-"suficiente) al principio del disco"
+"\"%s\": al hacer clic sobre el botĂłn \"%s\" se abrirĂĄ el asistente de\n"
+"configuraciĂłn de la impresora. Consulte el capĂ­tulo correspondiente de la\n"
+"\"GuĂ­a de Comienzo\" para mĂĄs informaciĂłn sobre cĂłmo configurar una\n"
+"impresora nueva. La interfaz presentada allĂ­ es similar a la utilizada\n"
+"durante la instalaciĂłn."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Por favor, haga primero una copia de seguridad de sus datos"
+msgid "Bhutan"
+msgstr "ButĂĄn"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Read carefully!"
-msgstr "ÂĄLea con cuidado!"
+msgid "Network interface"
+msgstr "Interfaz de red"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Encryption key (again)"
-msgstr "Clave de cifrado (otra vez)"
+msgid "Reading printer data..."
+msgstr "Leyendo los datos de la impresora ..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Encryption key"
-msgstr "Clave de cifrado"
+msgid "Korean keyboard"
+msgstr "Coreano"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "The encryption keys do not match"
-msgstr "Las claves de cifrado no coinciden"
+msgid "Not connected"
+msgstr "No conectado"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
+msgid "Greek"
+msgstr "Griego"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
msgstr ""
-"Esta clave de cifrado es demasiado simple\n"
-"(tiene que tener por lo menos una longitud de %d caracteres)"
+"Argumentos: (arg)\n"
+"\n"
+"Si \\fIarg\\fP = ALL permitir que existan /etc/issue y /etc/issue.net. Si "
+"\\fIarg\\fP = NONE no se\n"
+"permiten \"issues\", de lo contrario sĂłlo se permite /etc/issue."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "Elija la clave de cifrado de su sistema de archivos"
+msgid "Saint Kitts and Nevis"
+msgstr "Saint Kitts y Nevis"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Filesystem encryption key"
-msgstr "Clave de cifrado del sistema de archivos"
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
+msgstr ""
+"Transferencia exitosa\n"
+"Puede verificar que se puede conectar al servidor con:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"sin que se le pida una contraseña."
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Type: "
-msgstr "Tipo: "
+msgid "Enable OF Boot?"
+msgstr "ÂżHabilitar el arranque de OF?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "on channel %d id %d\n"
-msgstr "en el canal %d id %d\n"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "No se puede usar JFS para particiones menores de 32MB"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tipo de la tabla de particiones: %s\n"
+msgid "Monitor VertRefresh: %s\n"
+msgstr "Frecuencia vertical del monitor: %s\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Discos-LVM %s\n"
+msgid "path"
+msgstr "ruta"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Info: "
-msgstr "Info: "
+msgid "Mount point"
+msgstr "Punto de montaje"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "GeometrĂ­a: %s cilindros, %s cabezas, %s sectores\n"
+msgid ""
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
+msgstr ""
+"OcurriĂł un error:\n"
+"%s\n"
+"Intente cambiar algunos parĂĄmetros"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Size: %s\n"
-msgstr "Tamaño: %s\n"
+msgid "Restore system"
+msgstr "Restaurar archivos del sistema"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Read-only"
-msgstr "SĂłlo lectura"
+msgid ""
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
+msgstr ""
+"Estas son las mĂĄquinas en las cuales deberĂ­an estar disponibles los "
+"escĂĄneres conectados localmente:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Device: "
-msgstr "Dispositivo: "
+msgid "The DHCP end ip"
+msgstr "Última IP del rango de DHCP"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Esta particiĂłn especial de Bootstrap\n"
-"es para el arranque\n"
-"dual de su sistema.\n"
+msgid "Another one"
+msgstr "Otro"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Drakbackup"
+msgstr "Drakbackup"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Colombia"
+msgstr "Colombia"
+
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
+"Current configuration of `%s':\n"
"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
msgstr ""
+"ConfiguraciĂłn corriente de `%s':\n"
"\n"
-"Es probable que esta particiĂłn sea\n"
-"una particiĂłn de Controlador, probablemente\n"
-"deberĂ­a dejarla como estĂĄ.\n"
+"Red: %s\n"
+"DirecciĂłn IP: %s\n"
+"Atributo IP: %s\n"
+"Controlador: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nombre del archivo de loopback: %s"
+msgid "Plug'n Play"
+msgstr "Plug'n Play"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Discos-RAID %s\n"
+msgid "Reunion"
+msgstr "ReuniĂłn"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Chunk size %s\n"
-msgstr "Tamaño de los bloques %s\n"
+msgid "Details"
+msgstr "Detalles"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Level %s\n"
-msgstr "Nivel %s\n"
+msgid "For security reasons, it will be disconnected now."
+msgstr "Por motivos de seguridad, se desconectarĂĄ ahora."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"ParticiĂłn predeterminada de arranque\n"
-" (para arranque de MS-DOS, no para lilo)\n"
+msgid "Synchronization tool"
+msgstr "Herramienta de sincronizaciĂłn"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr ""
-"Archivo(s) de loopback:\n"
-" %s\n"
+msgid "Checking your system..."
+msgstr "Verificando su sistema..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+msgid "Print"
+msgstr "Imprimir"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mounted\n"
-msgstr "Montado\n"
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
+"Inserte la cinta con la etiqueta de volumen %s\n"
+" en la unidad de cinta %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not formatted\n"
-msgstr "No formateado\n"
+msgid "Mongolia"
+msgstr "Mongolia"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Formatted\n"
-msgstr "Formateado\n"
+msgid "Mounted\n"
+msgstr "Montado\n"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cilindros %d a %d\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Graphical Interface"
+msgstr "Interfaz grĂĄfica"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ", %s sectors"
-msgstr ", %s sectores"
+msgid "Restore Users"
+msgstr "Restaurar usuarios"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Size: %s"
-msgstr "Tamaño: %s"
+msgid "Encryption key for %s"
+msgstr "Clave de cifrado para %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Start: sector %s\n"
-msgstr "Comienzo: sector %s\n"
+msgid ""
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
+msgstr ""
+"El portmapper gestiona las conexiones RPC; que usan protocolos como\n"
+"NFS y NIS. El servidor portmap se debe estar ejecutando en los sistemas que "
+"actĂșan\n"
+"como servidores para protocolos que usan el mecanismo RPC."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Name: "
-msgstr "Nombre: "
+msgid "Detected hardware"
+msgstr "Hardware detectado"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Letra DOS: %s (simplemente una adivinanza)\n"
+msgid "Mauritius"
+msgstr "Mauricio"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "partition %s is now known as %s"
-msgstr "la particiĂłn %s ahora se conoce como %s"
+msgid "Myanmar (Burmese)"
+msgstr "Myanmar (Birmano)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Removing %s"
-msgstr "Borrando %s"
+msgid "Enabling swap partition %s"
+msgstr "Habilitando la particiĂłn swap %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Copying %s"
-msgstr "Copiando %s"
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgstr ""
+"No hay particiones FAT para usar como loopback (o no queda espacio "
+"suficiente)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Moving files to the new partition"
-msgstr "Moviendo los archivos a la nueva particiĂłn"
+msgid "Armenian (old)"
+msgstr "Armenio (antiguo)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
msgstr ""
-"El directorio %s ya tiene algunos datos\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Hide files"
-msgstr "Ocultar archivos"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Move files to the new partition"
-msgstr "Mover los archivos a la nueva particiĂłn"
+"Ya existe una impresora denominada \"%s\" bajo %s. \n"
+"Haga clic sobre \"Transferir\" para sobre-escribirla.\n"
+"También puede ingresar un nombre nuevo o saltear esta impresora."
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Se perderån todos los datos de la partición %s después de formatearla"
+msgid ""
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
+msgstr ""
+"Encuentre las soluciones a sus problemas por medio de la plataforma de "
+"soporte en lĂ­nea de MandrakeSoft"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Necesita reiniciar el equipo para que la modificaciĂłn tenga efecto"
+msgid ", host \"%s\", port %s"
+msgstr ", host \"%s\", puerto %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "ÂĄSe escribirĂĄ al disco la tabla de particiones de la unidad %s!"
+msgid "Monaco"
+msgstr "MĂłnaco"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "Se necesita el paquete %s. ÂżDesea instalarlo?"
+msgid "%s formatting of %s failed"
+msgstr "%s formateo de %s fallĂł"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "What type of partitioning?"
-msgstr "¿Qué tipo de particionamiento?"
+msgid "Partitioning failed: %s"
+msgstr "FallĂł el particionamiento: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Cuidado: esta operaciĂłn es peligrosa."
+msgid "Canada (cable)"
+msgstr "CanadĂĄ (cable)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "chunk size"
-msgstr "tamaño de los bloques"
+msgid "Upgrade"
+msgstr "ActualizaciĂłn"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "level"
-msgstr "nivel"
+msgid "Workstation"
+msgstr "EstaciĂłn de trabajo"
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "device"
-msgstr "dispositivo"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"Instalando el paquete %s\n"
+"%d%%"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Various"
-msgstr "Varios"
+msgid "Kyrgyzstan"
+msgstr "KirguizistĂĄn"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Mount options"
-msgstr "Opciones de montaje"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "With basic documentation"
+msgstr "Con documentaciĂłn bĂĄsica (ÂĄrecomendado!)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "File already exists. Use it?"
-msgstr "El archivo ya existe. ÂżDesea usarlo?"
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anacron, un planificador de comandos periĂłdicos."
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "El archivo ya lo utiliza otro dispositivo loopback, seleccione otro"
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"Debe tener una particiĂłn raĂ­z.\n"
+"Para ello, cree una particiĂłn (o haga clic sobre una que ya existe).\n"
+"Luego elija la acciĂłn \"Punto de montaje\" y defĂ­nalo como '/'"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Give a file name"
-msgstr "Indique el nombre de un archivo"
+msgid "Proxy should be http://..."
+msgstr "El nombre del proxy debe ser http://..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Filesystem type: "
-msgstr "Tipo de sistema de. archivos: "
+msgid "South Africa"
+msgstr "SudĂĄfrica"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Size in MB: "
-msgstr "Tamaño en MB: "
+msgid "Western Sahara"
+msgstr "Sahara Oeste"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Loopback file name: "
-msgstr "Nombre del archivo de loopback: "
+msgid "Etherboot Floppy/ISO"
+msgstr "Disquete/ISO Etherboot"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Loopback"
-msgstr "Loopback"
+msgid "Modify printer configuration"
+msgstr "Modificar configuraciĂłn de la impresora"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "Esta particiĂłn no puede usarse para el loopback"
+msgid "Choose a partition"
+msgstr "Elija una particiĂłn"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "LVM name?"
-msgstr "Âżnombre de LVM?"
+msgid "Edit current rule"
+msgstr "Editar regla corriente"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "new"
-msgstr "nuevo"
+msgid "%s"
+msgstr "%s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Elegir un LVM existente al que añadir"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
+msgstr ""
+"Argumentos: (arg)\n"
+"\n"
+"Habilitar/deshabilitar registro de paquetes IPv4 extraños."
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Elegir un RAID existente al que añadir"
+msgid "Please test the mouse"
+msgstr "Pruebe su ratĂłn, por favor."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Moving partition..."
-msgstr "Desplazando una particiĂłn..."
+msgid "Other Media"
+msgstr "Otros soportes"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Moving"
-msgstr "Desplazando"
+msgid "Backup system files"
+msgstr "Respaldar archivos del sistema"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "¿A qué sector desea desplazarla?"
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Sector"
msgstr "Sector"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "¿A qué disco desea desplazarla?"
+msgid "Qatar"
+msgstr "Qatar"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Move"
-msgstr "Desplazar"
+msgid "LDAP Base dn"
+msgstr "LDAP Base dn"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "New size in MB: "
-msgstr "Tamaño nuevo en MB: "
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr ""
+"No puede seleccionar este paquete porque no hay espacio suficiente para "
+"instalarlo"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Choose the new size"
-msgstr "Eligiendo el tamaño nuevo"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "generate auto-install floppy"
+msgstr "Generar un disquete de instalaciĂłn automĂĄtica"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Resize"
-msgstr "Redimensionar"
+msgid "Dialing mode"
+msgstr "Modo de marcaciĂłn"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Se perderån todos los datos de la partición %s tras cambiar su tamaño"
+msgid "File sharing"
+msgstr "Compartir archivos"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr ""
-"DeberĂ­a hacer una copia de seguridad de todos los datos de esta particiĂłn"
+msgid "Clean /tmp at each boot"
+msgstr "Limpiar /tmp en cada inicio del equipo"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This partition is not resizeable"
-msgstr "Esta particiĂłn no es redimensionable"
+msgid "Malawi"
+msgstr "Malawi"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Calculando los lĂ­mites del sistema de archivos FAT"
+msgid "Please choose your type of mouse."
+msgstr "Por favor, seleccione el tipo de su ratĂłn."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "ÂżDĂłnde desea montar a %s?"
+msgid "class of hardware device"
+msgstr "clase de dispositivo de hardware"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
msgstr ""
-"No se puede deseleccionar el punto de montaje ya que esta particiĂłn\n"
-"se usa para un montaje en loopback.\n"
-"Quite el montaje de loopback primero"
+"Estas son las mĂĄquinas y redes en las cuales deberĂ­a(n) estar disponible(s) "
+"la(s) impresora(s) conectada(s) localmente:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "ÂżDĂłnde desea montar el dispositivo %s?"
+msgid "United Kingdom"
+msgstr "Reino Unido"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "ÂżDĂłnde desea montar el archivo de loopback %s?"
+msgid "running"
+msgstr "corriendo"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "Cambiando de ext2 a ext3"
+msgid "default"
+msgstr "predeterminado"
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which filesystem do you want?"
-msgstr "¿Qué sistema de archivos desea?"
+msgid "Indonesia"
+msgstr "Indonesia"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Change partition type"
-msgstr "Cambiar el tipo de particiĂłn"
+msgid "France [SECAM]"
+msgstr "Francia [SECAM]"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "restrict"
+msgstr "restringir"
+
+#: ../../pkgs.pm:1
+#, c-format
+msgid "must have"
+msgstr "necesario"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
msgstr ""
-"Se perderån todos los datos de la partición %s después de cambiar su tipo"
+"CUPS no soporta impresoras en servidores Novell o impresoras que envĂ­an los "
+"datos en un comando formado libremente.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remove the loopback file?"
-msgstr "ÂżBorrar el archivo de loopback?"
+msgid "Senegal"
+msgstr "Senegal"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Command line"
+msgstr "LĂ­nea de comandos"
+
+#: ../../share/advertising/08-store.pl:1
#, c-format
msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
msgstr ""
-"No puede crear una particiĂłn nueva\n"
-"(debido a que alcanzĂł la cantidad mĂĄxima de particiones primarias).\n"
-"Primero debe quitar una particiĂłn primaria y crear una particiĂłn extendida."
+"Nuestro rango completo de soluciones Linux, así como también ofertas "
+"especiales sobre productos y otras \"cositas\", estĂĄn disponibles en lĂ­nea "
+"en nuestra tienda electrĂłnica:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Preference: "
-msgstr "Preferencia: "
+msgid "access to administrative files"
+msgstr "acceso a archivos administrativos"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Start sector: "
-msgstr "Sector de comienzo: "
+msgid ""
+"Error during sendmail.\n"
+" Your report mail was not sent.\n"
+" Please configure sendmail"
+msgstr ""
+"Error enviando correo con sendmail.\n"
+" Su correo-e de reporte no se enviĂł.\n"
+" Por favor, configure a sendmail"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Create a new partition"
-msgstr "Crear una particiĂłn nueva"
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ", dispositivo multifunciĂłn en puerto paralelo \\#%s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Use for loopback"
-msgstr "Usar para loopback"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
+msgstr ""
+"Argumentos: (val)\n"
+"\n"
+"Ajustar el timeout del shell. Un valor de cero significa sin timeout."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Modify RAID"
-msgstr "Modificar el RAID"
+msgid "Montserrat"
+msgstr "Monserrat"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Remove from LVM"
-msgstr "Quitar del LVM"
+msgid "Automatic dependencies"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Remove from RAID"
-msgstr "Quitar del RAID"
+msgid "Swap"
+msgstr "Intercambio"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Add to LVM"
-msgstr "Añadir al LVM"
+msgid "Connecting to the Internet "
+msgstr "Conectando a la Internet "
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add to RAID"
-msgstr "Añadir al RAID"
+msgid "Restore Other"
+msgstr "Restaurar otros"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Format"
-msgstr "Formatear"
+msgid "TV card"
+msgstr "Tarjeta de TV"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Detailed information"
-msgstr "InformaciĂłn detallada"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "Impresora en un servidor SMB/Windows 95/98/NT"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Trying to rescue partition table"
-msgstr "Tratando de rescatar la tabla de particiones"
+msgid ", "
+msgstr ", "
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
msgstr ""
-"Inserte un disquete en la unidad\n"
-"Se perderĂĄn todos los datos del disquete"
-
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Warning"
-msgstr "Advertencia"
+"Argumentos: (umask)\n"
+"\n"
+"Configurar la umask de root."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select file"
-msgstr "Elija un archivo"
+msgid "Remove selected host/network"
+msgstr "Quitar host/red seleccionada."
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
msgstr ""
-"La tabla de particiones de respaldo no tiene\n"
-"el mismo tamaño. ¿Desea continuar de todas formas?"
+"Postfix es un agente de transporte de correo (MTA), es decir el programa "
+"encargado de enviar el correo electrĂłnico de una mĂĄquina a otra."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Removable media automounting"
-msgstr "Montaje automĂĄtico de dispositivos extraĂ­bles"
+msgid "Disconnection from the Internet failed."
+msgstr "FallĂł la desconexiĂłn desde la Internet."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Reload partition table"
-msgstr "Volver a cargar la tabla de particiones"
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
+msgstr ""
+"AquĂ­ puede elegir la tecla o combinaciĂłn de teclas que permitirĂĄ\n"
+"cambiar entre los diferentes esquemas de teclado\n"
+"(ej.: latino y no latino)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Rescue partition table"
-msgstr "Rescatar la tabla de particiones"
+msgid "Network Hotplugging"
+msgstr "\"Enchufe en caliente\" de la red"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Restore partition table"
-msgstr "Restaurar la tabla de particiones"
+msgid "if set to yes, reports check result to tty."
+msgstr "si se pone en sĂ­, reportar resultados de verificaciĂłn en tty."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Save partition table"
-msgstr "Guardar la tabla de particiones"
+msgid "Restore From CD"
+msgstr "Restaurar desde CD"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-"Por favor, para tener mĂĄs particiones borre alguna para poder crear una "
-"particiĂłn extendida"
+"EstĂĄ a punto de configurar su computadora para compartir la conexiĂłn a "
+"Internet.\n"
+"Con esta caracterĂ­stica, otras computadoras de su red local podrĂĄn usar la "
+"conexiĂłn a Internet de esta computadora.\n"
+"\n"
+"Debe asegurarse que ha configurado su acceso a la Red/Internet utilizando "
+"drakconnect antes de proceder.\n"
+"\n"
+"Nota: necesita un adaptador de red dedicado para configurar una red de ĂĄrea "
+"local (LAN)."
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "I can't add any more partition"
-msgstr "No se pueden agregar mĂĄs particiones"
+msgid ""
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr ""
+"Por favor, elija el adaptador de red que desea usar para conectarse a "
+"Internet"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "All primary partitions are used"
-msgstr "Todas las particiones primarias estĂĄn usadas"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr ""
+"Acceso a la tarjeta de memoria de fotos en su dispositivo multifunciĂłn HP"
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Hard drive information"
-msgstr "InformaciĂłn del disco rĂ­gido"
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
+"Mejore el rendimiento de su computadora con la ayuda de una selecciĂłn de "
+"socios que ofrecen soluciones profesionales compatibles con Mandrake Linux"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Auto allocate"
-msgstr "AsignaciĂłn automĂĄtica"
+msgid "Internet Connection Sharing is now disabled."
+msgstr "Ahora, la conexiĂłn compartida a Internet estĂĄ inactiva."
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Clear all"
-msgstr "Borrar todas"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr "si se pone en sĂ­, verificar suma de los archivos suid/sgid."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "ÂżDesea guardar las modificaciones en /etc/fstab?"
+msgid "Latin American"
+msgstr "Latinoamericano"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "ÂżSalir del programa sin grabar la tabla de particiones?"
+msgid "Japanese text printing mode"
+msgstr "Modo de impresión de texto japonés"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Quit without saving"
-msgstr "Salir sin grabar"
+msgid "Old device file"
+msgstr "Archivo de dispositivo antiguo"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Continue anyway?"
-msgstr "ÂżSeguir adelante?"
+msgid "Info: "
+msgstr "Info: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Toggle to expert mode"
-msgstr "Cambiar al modo experto"
+msgid "Button `%s': %s"
+msgstr "BotĂłn `%s': %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Toggle to normal mode"
-msgstr "Cambiar al modo normal"
+msgid "Please wait"
+msgstr "Espere, por favor"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Undo"
-msgstr "Deshacer"
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Exit"
-msgstr "Salir"
+msgid "None"
+msgstr "Ninguno"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose a partition"
-msgstr "Elija una particiĂłn"
+msgid "The entered IP is not correct.\n"
+msgstr "La IP ingresada no es correcta.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose another partition"
-msgstr "Elija otra particiĂłn"
+msgid "Ethernet Card"
+msgstr "Tarjeta ethernet"
-#: ../../diskdrake/removable.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Change type"
-msgstr "Cambiar tipo"
+msgid "Info"
+msgstr "Info"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Search servers"
-msgstr "Buscar servidores"
+msgid "Install"
+msgstr "Instalar"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Domain"
-msgstr "Dominio"
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr ""
+"Haga clic sobre \"%s\" si desea borrar todos los datos y particiones\n"
+"presentes en esta unidad de disco. Tenga cuidado, luego de hacer clic sobre\n"
+"\"%s\", no podrĂĄ recuperar los datos y las particiones presentes en esta\n"
+"unidad de disco, incluyendo los datos de Windows.\n"
+"\n"
+"Haga clic sobre \"%s\" para detener esta operaciĂłn sin perder los datos ni\n"
+"las particiones presentes en esta unidad de disco."
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Username"
-msgstr "Nombre de usuario"
+msgid "Exit install"
+msgstr "Salir de la instalaciĂłn"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Please enter your username, password and domain name to access this host."
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
msgstr ""
-"Por favor, ingrese su nombre de usuario, contraseña y nombre de dominio para "
-"acceder a este host."
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Domain Authentication Required"
-msgstr "Se necesita autenticaciĂłn de dominio"
+"Se ha configurado todo.\n"
+"Ahora puede compartir su conexiĂłn a Internet con otros ordenadores de su red "
+"de ĂĄrea local, usando la configuraciĂłn automĂĄtica de la red (DHCP)."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Another one"
-msgstr "Otro"
+msgid "Remote CUPS server"
+msgstr "Servidor CUPS remoto"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Which username"
-msgstr "Qué nombre de usuario"
+msgid "Sun - Mouse"
+msgstr "RatĂłn Sun"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Can't login using username %s (bad password?)"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
msgstr ""
-"No se puede conectar utilizando el nombre de usuario %s (¿contraseña "
-"incorrecta?)"
+"SĂłlo hay un adaptador de red configurado en su sistema:\n"
+"\n"
+"%s\n"
+"\n"
+"Se va a configurar su red de ĂĄrea local con ese adaptador."
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "cpu # "
-msgstr "cpu #"
+msgid "Minimal install"
+msgstr "InstalaciĂłn mĂ­nima"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "SMBus controllers"
-msgstr "Controladores SMBus"
+msgid "Ethiopia"
+msgstr "EtiopĂ­a"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "USB controllers"
-msgstr "Controladores USB"
+msgid "Devanagari"
+msgstr "Indio (Devanagari)"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "SCSI controllers"
-msgstr "Controladores SCSI"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr ""
+"- dispositivos PCI: el zĂłcalo PCI, dispositivo y funciĂłn de esta tarjeta\n"
+"- dispositivos EIDE: el dispositivo es o bien uno maestro o uno esclavo\n"
+"- dispositivos SCSI: el bus SCSI y los id de dispositivo SCSI"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Firewire controllers"
-msgstr "Controladores Firewire"
+msgid "Total size: %d / %d MB"
+msgstr "Tamaño total: %d / %d MB"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "Controladores (E)IDE/ATA"
+msgid "disabled"
+msgstr "deshabilitado"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Joystick"
-msgstr "Joystick"
+msgid "Search for new scanners"
+msgstr "Buscar escĂĄneres nuevos"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Scanner"
-msgstr "EscĂĄner."
+msgid "Disabling servers..."
+msgstr "Desactivando los servidores..."
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unknown/Others"
-msgstr "Desconocido/Otros"
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr ""
+"Por favor, elija el intervalo de\n"
+" tiempo entre cada copia de respaldo"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Bridges and system controllers"
-msgstr "Puentes y controladores del sistema"
+msgid "Installation of %s failed. The following error occured:"
+msgstr "FallĂł la instalaciĂłn de %s. OcurriĂł el siguiente error:"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Modem"
-msgstr "MĂłdem"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr "No se puede ejecutar mkinitrd -f /boot/initrd-%s.img %s."
-#: ../../harddrake/data.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Ethernetcard"
-msgstr "Tarjeta Ethernet"
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
+msgstr ""
+"Ha seleccionado el/los siguientes servidores: %s\n"
+"\n"
+"\n"
+"Estos servidores se activan por defecto. No se les conocen problemas de\n"
+"seguridad, pero se pueden encontrar problemas nuevos. En ese caso, debe "
+"asegurarse de\n"
+"actualizarlos tan pronto como sea posible.\n"
+"\n"
+"\n"
+"ÂżRealmente desea instalar estos servidores?\n"
-#: ../../harddrake/data.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Processors"
-msgstr "Procesadores"
+msgid "Network printer (TCP/Socket)"
+msgstr "Impresora de red (TCP/Socket)"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Webcam"
-msgstr "CĂĄmara web"
+msgid "Backup User files..."
+msgstr "Respaldar archivos de usuario..."
-#: ../../harddrake/data.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Soundcard"
-msgstr "Tarjeta de sonido"
+msgid "Install system"
+msgstr "Instalar el sistema"
-#: ../../harddrake/data.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Other MultiMedia devices"
-msgstr "Otros dispositivos multimedios"
+msgid "First DNS Server (optional)"
+msgstr "Primer servidor DNS (opcional)"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Tvcard"
-msgstr "Tarjeta de TV"
+msgid ""
+"Alternatively, you can specify a device name/file name in the input line"
+msgstr ""
+"Alternativamente, puede especificar el nombre de un dispositivo o archivo en "
+"la lĂ­nea de entrada"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Videocard"
-msgstr "Tarjeta de vĂ­deo"
+msgid "dhcpd Config..."
+msgstr "ConfiguraciĂłn de dhcpd..."
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Tape"
-msgstr "Cinta"
+msgid "The setup has already been done, but it's currently disabled."
+msgstr "La configuraciĂłn ya se ha hecho, pero ahora estĂĄ desactivada."
-#: ../../harddrake/data.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
+msgid "LILO/grub Installation"
+msgstr "InstalaciĂłn de LILO/grub"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "CD/DVD burners"
-msgstr "Grabadoras de CD/DVD"
+msgid "Israeli"
+msgstr "IsraelĂ­"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "CDROM"
-msgstr "CD-ROM"
+msgid "load setting"
+msgstr "configuraciĂłn de la carga"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disk"
-msgstr "Disco"
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "Impresora \"%s\" en el servidor \"%s\""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Zip"
-msgstr "Zip"
+msgid "Floppy can be removed now"
+msgstr "Ya se puede quitar el disquete"
-#: ../../harddrake/data.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Truly minimal install"
+msgstr "InstalaciĂłn mĂ­nima"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Floppy"
-msgstr "Disquete"
+msgid "Denmark"
+msgstr "Dinamarca"
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Let me pick any driver"
-msgstr "Permitirme elegir cualquier controlador"
+msgid "Moving partition..."
+msgstr "Desplazando una particiĂłn..."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Driver:"
-msgstr "Controlador:"
+msgid "(This) DHCP Server IP"
+msgstr "IP de (este) servidor DHCP"
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
-"Si realmente cree que sabe qué controlador es el adecuado para su tarjeta\n"
-"puede elegir uno en la lista de arriba.\n"
-"\n"
-"El controlador corriente para su tarjeta de sonido \"%s\" es \"%s\" "
+msgid "Test of the configuration"
+msgstr "Probar la configuraciĂłn"
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr "Eligiendo un controlador arbitrario"
+msgid "Installing %s ..."
+msgstr "Instalando %s ..."
-#: ../../harddrake/sound.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
msgstr ""
-"El probador de sonido clĂĄsico va a ejecutar los comandos siguientes:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" le dirå qué controlador predet. usa su\n"
-"tarjeta de sonido\n"
+"Si le dijo al instalador que deseaba seleccionar los paquetes individuales,\n"
+"el mismo presentarĂĄ un ĂĄrbol que contiene todos los paquetes clasificados\n"
+"por grupos y subgrupos. Mientras navega por el ĂĄrbol puede seleccionar\n"
+"grupos enteros, subgrupos, o paquetes individuales.\n"
"\n"
-"- \"grep sound-slot /etc/modules.conf\n"
-"\" le dirå qué controlador usa la misma\n"
-"en este momento\n"
+"Tan pronto como selecciona un paquete en el ĂĄrbol, aparece una descripciĂłn\n"
+"del mismo sobre la derecha que le permite conocer el propĂłsito del paquete.\n"
"\n"
-"- \"/sbin/lsmod\" le permitirĂĄ verificar si su mĂłdulo (controlador) estĂĄ\n"
-"cargado o no\n"
+"Es muy probable que la gran mayorĂ­a de las descripciones de los paquetes\n"
+"estén en inglés.\n"
"\n"
-"- \"/sbin/chkconfig --list sound\" y \"/sbin/chkconfig --list alsa\" le "
-"dirĂĄ\n"
-"si los servicios alsa y sonido estĂĄn configurados para correr en el nivel\n"
-"de ejecuciĂłn 3\n"
+"!! Si ha sido seleccionado un paquete de servidor ya sea porque Usted\n"
+"seleccionĂł especĂ­ficamente el paquete individual o porque el mismo era\n"
+"parte de un grupo de paquetes, se le pedirĂĄ que confirme que realmente\n"
+"desea que se instalen esos servidores. Bajo Mandrake Linux, cualquier\n"
+"servidor instalado se inicia de manera predeterminada al momento del\n"
+"arranque. Aunque estos son seguros y no tienen problemas conocidos al\n"
+"momento en que se publicĂł la distribuciĂłn, es posible que se descubran\n"
+"vulnerabilidades en la seguridad luego que se terminĂł con esta versiĂłn de\n"
+"Mandrake Linux. En particular, si no sabe que es lo que se supone que hace\n"
+"un servicio o la razĂłn por la cual se estĂĄ instalando, entonces haga clic\n"
+"sobre \"%s\". Si hace clic sobre \"%s\" se instalarĂĄn todos los servicios\n"
+"listados y de manera predeterminada los mismos arrancarĂĄn automĂĄticamente.\n"
+"!!\n"
"\n"
-"- \"aumix -q\" le dirĂĄ si el volumen del sonido estĂĄ mudo o no\n"
+"La opciĂłn \"%s\" simplemente deshabilita el diĂĄlogo de advertencia que\n"
+"aparece cuando el instalador selecciona automĂĄticamente un paquete para\n"
+"resolver un problema de dependencias. Algunos paquetes tienen relaciones\n"
+"entre ellos tales que la instalaciĂłn de un paquete necesita que algĂșn otro\n"
+"programa ya esté instalado. El instalador puede determinar qué paquetes se\n"
+"necesitan para satisfacer una dependencia para completar la instalaciĂłn de\n"
+"manera satisfactoria.\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" le dirå qué programa utiliza la tarjeta de "
-"sonido.\n"
-
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Sound trouble shooting"
-msgstr "SoluciĂłn de problemas de sonido"
+"El pequeño icono del disquete al final de la lista le permite cargar la\n"
+"lista de paquetes elegida durante una instalaciĂłn previa. Esto es Ăștil si\n"
+"Usted tiene una cantidad de mĂĄquinas que desea configurar de manera\n"
+"idéntica. Haga clic sobre este icono y se le pedirå que inserte un disquete\n"
+"creado con anterioridad al final de otra instalaciĂłn. Vea el segundo\n"
+"consejo del Ășltimo paso para informaciĂłn sobre como crear dicho disquete."
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "Error: el controlador \"%s\" para su tarjeta de sonido no estĂĄ listado"
+msgid "Choose your filesystem encryption key"
+msgstr "Elija la clave de cifrado de su sistema de archivos"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unkown driver"
-msgstr "Controlador desconocido"
+msgid ""
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
+msgstr ""
+"Por favor, elija su dispositivo CD/DVD\n"
+"(Presione Intro para propagar las configuraciones a otros campos.\n"
+"Este campo no es necesario, sĂłlo una herramienta para completar el "
+"formulario.)"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "No hay un controlador conocido para su tarjeta de sonido (%s)"
+msgid "Andorra"
+msgstr "Andorra"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No known driver"
-msgstr "No hay controlador conocido"
+msgid "Sierra Leone"
+msgstr "Sierra Leona"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-"No hay controlador libre para su tarjeta de sonido (%s), pero hay uno "
-"propietario en \"%s\"."
+msgid "Botswana"
+msgstr "Botswana"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "No open source driver"
-msgstr "No hay controlador open source"
+msgid "(default value: %s)"
+msgstr " (valor predeterminado: %s)"
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Espere, por favor... Aplicando la configuraciĂłn"
+msgid "Alternative test page (Letter)"
+msgstr "PĂĄgina de prueba alternativa (Letter)"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"The old \"%s\" driver is blacklisted.\n"
+"DHCP Server Configuration.\n"
"\n"
-"It has been reported to oops the kernel on unloading.\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-"El controlador antiguo \"%s\" estĂĄ en la lista negra.\n"
+"ConfiguraciĂłn del servidor DHCP.\n"
"\n"
-"Ha sido reportado como problemĂĄtico para el nĂșcleo al descargarlo.\n"
+"AquĂ­ puede seleccionar opciones diferentes para la configuraciĂłn del "
+"servidor DHCP.\n"
+"Si no conoce el significado de una opción, simlpemente déjela como estå.\n"
"\n"
-"El controlador nuevo \"%s\" sĂłlo se utilizarĂĄ en el prĂłximo arranque."
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Trouble shooting"
-msgstr "SoluciĂłn de problemas"
+msgid "Choose an X server"
+msgstr "Seleccione un servidor X"
-#: ../../harddrake/sound.pm:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Swap partition size in MB: "
+msgstr "Tamaño de la partición de intercambio en MB: "
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
+"Other (not drakbackup)\n"
+"keys in place already"
msgstr ""
-"OSS (Open Sound System) fue el primer API de sonido. Es un API de sonido "
-"independiente del sistema operativo (estĂĄ disponible en la mayorĂ­a de los "
-"sistemas Unix) pero es un API muy bĂĄsico y limitado.\n"
-"Es mĂĄs, todos los controladores OSS reinventan la rueda.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) es una arquitectura modular que\n"
-"soporta un amplio rango de tarjetas ISA, USB y PCI.\n"
-"\n"
-"También brinda un API de mås alto nivel que OSS.\n"
-"\n"
-"Para utilizar ALSA, uno puede utilizar:\n"
-"- el API antiguo de compatibilidad OSS\n"
-"- el API nuevo de ALSA que brinda muchas caracterĂ­sticas mejoradas pero "
-"necesita del uso de la bilbioteca ALSA.\n"
+"Otro (no drakbackup)\n"
+"las claves ya estĂĄn en su lugar"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "No changes to backup!"
+msgstr "ÂĄNo hay cambios para realizar respaldo!"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Formatted\n"
+msgstr "Formateado\n"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Type of install"
+msgstr "Tipo de instalaciĂłn."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "Impresora \"%s\" en el servidor SMB/Windows \"%s\""
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
+"- Daemon (%s) include:\n"
msgstr ""
"\n"
-"\n"
-"Actualmente su tarjeta usa el controlador %s\"%s\" (el controlador predet. "
-"para su tarjeta es \"%s\")"
+"- Servidor (%s) incluye :\n"
-#: ../../harddrake/sound.pm:1
+#: ../../modules/parameters.pm:1
+#, c-format
+msgid "%d comma separated numbers"
+msgstr "%d nĂșmeros separados por comas"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
msgstr ""
-"AquĂ­ puede seleccionar un controlador alternativo (OSS o ALSA) para su "
-"tarjeta de sonido (%s)"
+"El protocolo rusers permite que los usuarios de una red identifiquen\n"
+"quien estĂĄ conectado en otras mĂĄquinas que respondan."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Sound configuration"
-msgstr "ConfiguraciĂłn de sonido"
+msgid "Automatic Steps Configuration"
+msgstr "ConfiguraciĂłn de pasos automĂĄticos"
-#: ../../harddrake/sound.pm:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
msgstr ""
-"No hay contrlador alternativo OSS/ALSA conocido para su tarjeta de sonido (%"
-"s) que en este momento usa \"%s\""
+"ÂżDesea saber mĂĄs acerca de la comunidad de CĂłdigo Abierto? Participe en el "
+"mundo del Software Libre!"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No alternative driver"
-msgstr "No hay controlador alternativo"
+msgid "Barbados"
+msgstr "Barbados"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "enable radio support"
-msgstr "habilitar el soporte para radio"
+msgid "Please select data to backup..."
+msgstr "Por favor, elija los datos a respaldar..."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Radio support:"
-msgstr "Soporte para radio :"
+msgid ""
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
+msgstr ""
+"FallĂł la conexiĂłn.\n"
+"Verifique su configuraciĂłn en el Centro de Control de Mandrake."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "PLL setting:"
-msgstr "ConfiguraciĂłn del PLL :"
+msgid "received"
+msgstr "recibido"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr "Cantidad de bĂșferes de captura para la captura con mmap"
+msgid "/File/_New"
+msgstr "/Archivo/_Nuevo"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Number of capture buffers:"
-msgstr "Cantidad de bĂșferes de captura :"
+msgid "The DNS Server IP"
+msgstr "La IP del servidor DNS"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Tuner type:"
-msgstr "Tipo de sintonizador :"
+msgid "IP Range End:"
+msgstr "Fin de rango IP:"
-#: ../../harddrake/v4l.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Card model:"
-msgstr "Modelo de la tarjeta :"
+msgid "High"
+msgstr "Alta"
-#: ../../harddrake/v4l.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
-"El mĂłdulo bttv del nĂșcleo GNU/Linux simplemente detecta automĂĄticamente los "
-"parĂĄmetros correctos para la mayorĂ­a de las tarjetas de TV modernas.\n"
-"Si no se detecta correctamente la suya, aquĂ­ puede forzar los tipos de "
-"tarjeta y sintonizador adecuados. Simplemente seleccione los parĂĄmetros de "
-"su tarjeta de TV si lo necesita."
+msgid "NoVideo"
+msgstr "Sin vĂ­deo"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "this field describes the device"
+msgstr "Este campo describe al dispositivo"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Unknown|Generic"
-msgstr "Desconocido|Genérico"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Agregando impresora a Star Office/OpenOffice.org/GIMP"
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "Desconocido|CPH06X (bt878) [muchos fabricantes]"
+msgid "Local Printers"
+msgstr "Impresoras locales"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "Desconocido|CPH05X (bt878) [muchos fabricantes]"
+msgid "Installation image directory"
+msgstr "Directorio de imagen de instalaciĂłn"
-#: ../../harddrake/v4l.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Auto-detect"
-msgstr "DetecciĂłn automĂĄtica"
+msgid "NIS Server"
+msgstr "Servidor NIS"
-#: ../../interactive/newt.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Do"
-msgstr "Hacer"
+msgid "Port: %s"
+msgstr "Puerto: %s"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Your choice? (default %s) "
-msgstr "ÂżSu elecciĂłn? (por defecto %s)"
+msgid "Spain"
+msgstr "España"
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Elección incorrecta, inténtelo de nuevo\n"
+msgid "This user name has already been added"
+msgstr "Este nombre de usuario ya fue añadido"
-#: ../../interactive/stdio.pm:1
+#: ../../interactive.pm:1
#, c-format
-msgid "Re-submit"
-msgstr "Reenviar"
+msgid "Choose a file"
+msgstr "Elija un archivo"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Aviso, una etiqueta cambiĂł:\n"
-"%s"
+msgid "Apply"
+msgstr "Aplicar"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Por favor, seleccione el primer nĂșmero del rango de 10 que desee\n"
-"editar, o pulse Intro para continuar.\n"
-"ÂżSu elecciĂłn?"
+msgid "Auto-detect available ports"
+msgstr "/Autodetectar puertos disponibles"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Hay muchas cosas para seleccionar (%s).\n"
+msgid "Internet Connection Sharing currently disabled"
+msgstr "Ahora, la conexiĂłn compartida a Internet estĂĄ desactivada"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "ÂżSu elecciĂłn? (por defecto %s'%s) "
+msgid "San Marino"
+msgstr "San Marino"
-#: ../../interactive/stdio.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid " enter `void' for void entry"
-msgstr "ingrese `void' para una entrada vacĂ­a"
+msgid "Belgium"
+msgstr "BĂ©lgica"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to click on this button?"
-msgstr "ÂżDesea pulsar este botĂłn?"
+msgid "Kuwait"
+msgstr "Kuwait"
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Button `%s': %s"
-msgstr "BotĂłn `%s': %s"
+msgid "Choose the window manager to run:"
+msgstr "Elija el gestor de ventanas a ejecutar:"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "sub generation of the cpu"
+msgstr "Sub-generaciĂłn de la CPU"
+
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "ÂżSu elecciĂłn? (0/1, por defecto '%s') "
+msgid "First Time Wizard"
+msgstr "Aisstente Inicial"
-#: ../../interactive/stdio.pm:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Entries you'll have to fill:\n"
-"%s"
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
msgstr ""
-"Entradas que tendrĂĄ que rellenar:\n"
-"%s"
+"OcurriĂł un error y no se puede gestionar de forma adecuada.\n"
+"ContinĂșe bajo su propio riesgo."
-#: ../../modules/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Error al cargar el mĂłdulo %s.\n"
-"ÂżDesea intentarlo de nuevo con otros parĂĄmetros?"
+msgid "please wait, parsing file: %s"
+msgstr "por favor, espere, analizando el archivo: %s"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Specify options"
-msgstr "Especificar las opciones"
+msgid "Taiwan"
+msgstr "TaiwĂĄn"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Autoprobe"
-msgstr "AutodetecciĂłn"
+msgid "Pakistan"
+msgstr "PakistĂĄn"
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
msgstr ""
-"En algunos casos, el controlador de %s necesita informaciĂłn extra\n"
-"para funcionar correctamente, aunque normalmente funcione sin ella.\n"
-"ÂżDesea especificar informaciĂłn extra para el controlador o dejar que el "
-"mismo\n"
-"pruebe su equipo y encuentre la informaciĂłn que necesita? A veces,\n"
-"el probar el equipo puede provocar que Ă©ste se cuelgue, pero no deberĂ­a\n"
-"causar ningĂșn daño."
+"Para poder imprimir con su impresora de inyecciĂłn de tinta Lexmark y esta "
+"configuraciĂłn, necesita los controladores de impresoras de inyecciĂłn de "
+"tinta proporcionados por Lexmark (http://www.lexmark.com/). Haga clic en el "
+"vĂ­nculo \"Drivers\". Luego, seleccione su modelo y posteriormente \"Linux\" "
+"como sistema operativo. Los controladores vienen vienen como paquetes RPM o "
+"como scripts del shell con instalaciĂłn grĂĄfica interactiva. No necesita "
+"hacer esta configuraciĂłn con las interfaces grĂĄficas. Cancele directamente "
+"tras el acuerdo de licencia. Luego imprima las pĂĄginas de alineaciĂłn del "
+"cabezal de impresiĂłn con \"lexmarkmaintain\" y ajuste la configuraciĂłn de la "
+"alineaciĂłn de la cabeza con este programa."
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Which %s driver should I try?"
-msgstr "¿Qué controlador de %s debo probar?"
+msgid "Permissions"
+msgstr "Permisos"
-#: ../../modules/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Module options:"
-msgstr "Opciones de los mĂłdulos:"
+msgid "Provider name (ex provider.net)"
+msgstr "Nombre del proveedor (ej proveedor.net)"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"AquĂ­ deben ir las diferentes opciones para el mĂłdulo %s.\n"
-"Las opciones son de la forma \"nombre=valor nombre2=valor2 ...\".\n"
-"Por ejemplo, \"io=0x300 irq=7\""
+msgid "Version: %s\n"
+msgstr "VersiĂłn: %s\n"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
-"Ahora puede proporcionar las opciones al mĂłdulo %s.\n"
-"Note que cualquier direcciĂłn debe ingresarse con el prefijo 0x, ej.: '0x123'"
+"Su sistema tiene pocos recursos. Puede tener algĂșn problema instalando\n"
+"Mandrake Linux. Si eso ocurre, puede intentar una instalaciĂłn tipo texto.\n"
+"Para ello, presione 'F1' cuando arranque desde el CDROM, e introduzca 'text'."
-#: ../../modules/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "(module %s)"
-msgstr "(mĂłdulo %s)"
+msgid "Use the Windows partition for loopback"
+msgstr "Usar la particiĂłn de Windows para loopback"
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instalando controlador para la tarjeta %s %s"
+msgid "Armenian (typewriter)"
+msgstr "Armenio (nuevo)"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "See hardware info"
-msgstr "Ver informaciĂłn sobre el hardware"
+msgid "Connection type: "
+msgstr "Tipo de conexiĂłn: "
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "ÂżTiene alguna interfaz %s?"
+msgid "Graphical interface"
+msgstr "Interfaz grĂĄfica"
-#: ../../modules/interactive.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Do you have another one?"
-msgstr "ÂżTiene alguna otra?"
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s con aceleraciĂłn 3D por hardware"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s interfaces %s encontradas"
+msgid "India"
+msgstr "India"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "AquĂ­ puede configurar cada parĂĄmetro del mĂłdulo."
+msgid "Chad"
+msgstr "Chad"
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "comma separated strings"
-msgstr "cadenas de caracteres separadas por comas"
+msgid "Slovakia"
+msgstr "Eslovaquia"
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "comma separated numbers"
-msgstr "nĂșmeros separados por comas"
+msgid "Singapore"
+msgstr "Singapur"
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "%d comma separated strings"
-msgstr "%d cadenas de caracteres separadas por comas"
+msgid "Cambodia"
+msgstr "Camboya"
-#: ../../modules/parameters.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d nĂșmeros separados por comas"
+msgid "Monitor HorizSync: %s\n"
+msgstr "Frecuencia horizontal del monitor: %s\n"
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "a number"
-msgstr "un nĂșmero"
+msgid "Path"
+msgstr "Ruta"
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
msgstr ""
-"Necesita el microcĂłdigo Alcatel.\n"
-"DescĂĄrguelo en\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"y copie mgmt.o en /usr/share/speedtouch"
+"AquĂ­ puede especificar una lĂ­nea de comandos arbitraria en la cual deberĂ­a "
+"ponerse el trabajo de impresiĂłn en vez de enviarse directamente a la "
+"impresora."
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
msgstr ""
-"La forma mĂĄs comĂșn de conexiĂłn ADSL es con pppoe.\n"
-"Algunas conexiones usan pptp, otras pocas usan dhcp.\n"
-"Si no lo sabe con seguridad, elija 'usar pppoe'"
+"El sistema de impresiĂłn (%s) no se iniciarĂĄ automĂĄticamente cuando arranque "
+"la mĂĄquina.\n"
+"\n"
+"Es posible que el inicio automĂĄtico se desactivĂł al cambiar a un nivel de "
+"seguridad mayor, porque el sistema de impresiĂłn es un potencial punto de "
+"ataques.\n"
+"\n"
+"ÂżDesea volver a activar el inicio automĂĄtico de la impresiĂłn cuando el "
+"sistema se vuelva a encender?"
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Connect to the Internet"
-msgstr "Conectar a Internet"
+msgid ""
+"Printer %s\n"
+"What do you want to modify on this printer?"
+msgstr ""
+"Impresora %s\n"
+"¿Qué desea modificar de esta impresora?"
-#: ../../network/adsl.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Sagem (using pppoa) usb"
-msgstr "Sagem (usando pppoa) usb"
+msgid "Add host"
+msgstr "Añadir host"
-#: ../../network/adsl.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel Speedtouch usb"
+msgid ""
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
+"\n"
+"The current driver for your \"%s\" sound card is \"%s\" "
+msgstr ""
+"Si realmente cree que sabe qué controlador es el adecuado para su tarjeta\n"
+"puede elegir uno en la lista de arriba.\n"
+"\n"
+"El controlador corriente para su tarjeta de sonido \"%s\" es \"%s\" "
-#: ../../network/adsl.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "use dhcp"
-msgstr "usar dhcp"
+msgid ""
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
+"\n"
+"\"Custom\" permit a per-user granularity.\n"
+msgstr ""
+"ÂżDesea permitir a los usuarios exportar algunos directorios personales?\n"
+"Si lo hace, los usuarios podrĂĄn simplemente hacer clic sobre \"Compartir\" "
+"en Konqueror y Nautilus.\n"
+"\n"
+"\"Personalizar\" permite una granularidad por usuario.\n"
-#: ../../network/adsl.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "use pptp"
-msgstr "usar pptp"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
+msgstr ""
+"Por favor, seleccione cargar o guardar la selecciĂłn de paquetes en "
+"disquete.\n"
+"El formato es el mismo que los disquetes generados para la instalaciĂłn "
+"automĂĄtica."
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "use pppoe"
-msgstr "usar pppoe"
+msgid "China (broadcast)"
+msgstr "China (difusiĂłn)"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Other ports"
-msgstr "Otros puertos"
+msgid "Use quota for backup files."
+msgstr "Usar cuota para archivos de respaldo"
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Everything (no firewall)"
-msgstr "Todo (sin cortafuegos)"
+msgid "Configuring printer \"%s\"..."
+msgstr "Configurando la impresora \"%s\" ..."
-#: ../../network/drakfirewall.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
-msgstr ""
-"Puerto no vĂĄlido: %s.\n"
-"El formato adecuado es \"puerto/tcp\" o \"puerto/udp\", \n"
-"donde puerto es un nĂșmero entre 1 y 65535."
+msgid "Internet connection"
+msgstr "ConexiĂłn a Internet"
-#: ../../network/drakfirewall.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
msgstr ""
-"Puede ingresar otros puertos. \n"
-"Por ejemplo: 139/tcp 139/udp.\n"
-"Consulte /etc/services para mĂĄs informaciĂłn."
+"Error al cargar el mĂłdulo %s.\n"
+"ÂżDesea intentarlo de nuevo con otros parĂĄmetros?"
-#: ../../network/drakfirewall.pm:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr "¿A qué servicios desearía permitir conectarse desde la Internet?"
+msgid "Welcome to the Open Source world."
+msgstr "Bienvenido al mundo del CĂłdigo Abierto"
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-"ConfiguraciĂłn de drakfirewall\n"
-"\n"
-"Debe asegurarse que ha configurado su acceso de Red/Internet con\n"
-"drakconnect antes de continuar."
+msgid "Bosnia and Herzegovina"
+msgstr "Bosnia Herzegovina"
-#: ../../network/drakfirewall.pm:1
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
msgstr ""
-"configurador de drakfirewall\n"
-"\n"
-"Esto configura un cortafuegos personal para esta mĂĄquina Mandrake Linux.\n"
-"Para una soluciĂłn potente de cortafuegos dedicada, por favor eche un "
-"vistazo\n"
-"a la distribuciĂłn especializada MandrakeSecurity Firewall."
+"Necesita un sistema de archivos verdadero (ext2/ext3, reiserfs, xfs o jfs) "
+"para este punto de montaje\n"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "No network card"
-msgstr "Sin tarjeta de red"
+msgid "You must enter a host name or an IP address.\n"
+msgstr "Debe ingresar el nombre o la IP del host.\n"
-#: ../../network/drakfirewall.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "POP and IMAP Server"
-msgstr "Servidor POP e IMAP"
+msgid "Netherlands"
+msgstr "Holanda"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "Enviando archivos..."
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Mail Server"
-msgstr "Servidor de correo"
+msgid "Internal ISDN card"
+msgstr "Tarjeta RDSI interna"
-#: ../../network/drakfirewall.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Domain Name Server"
-msgstr "Servidor de nombres de dominio"
+msgid ""
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
+msgstr ""
+"No hay contrlador alternativo OSS/ALSA conocido para su tarjeta de sonido (%"
+"s) que en este momento usa \"%s\""
-#: ../../network/drakfirewall.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Web Server"
-msgstr "Servidor web"
+msgid "Title"
+msgstr "TĂ­tulo"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr "El nombre de la mĂĄquina Zeroconf no debe contener un ."
+msgid "Install & convert Fonts"
+msgstr "Instalar y convertir tipografĂ­as"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Host name"
-msgstr "Nombre de la mĂĄquina"
+msgid "WARNING"
+msgstr "ATENCIÓN"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Zeroconf Host name"
-msgstr "Nombre de la mĂĄquina Zeroconf"
+msgid "Installing bootloader"
+msgstr "Instalando cargador de arranque"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
-msgstr ""
-"\n"
-"\n"
-"Ingrese un nombre de la mĂĄquina Zeroconf sin puntos si no desea\n"
-"utilizar el nombre predeterminado."
+msgid "replay"
+msgstr "reproducir"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Configuring network"
-msgstr "Configurando la red"
+msgid "detected %s"
+msgstr "detectada %s"
-#: ../../network/ethernet.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
-msgstr ""
-"Por favor, elija el adaptador de red que desea usar para conectarse a "
-"Internet"
+msgid "Virgin Islands (U.S.)"
+msgstr "Islas VĂ­rgenes (EE.UU.)"
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Choose the network interface"
-msgstr "Elija la interfaz de red"
+msgid "Bad backup file"
+msgstr "Archivo de respaldo incorrecto"
-#: ../../network/ethernet.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"No se ha detectado ningĂșn adaptador de red ethernet en su sistema.\n"
-"No se puede configurar este tipo de conexiĂłn."
+"Ya se ha realizado la configuraciĂłn de la conexiĂłn compartida a la "
+"Internet.\n"
+"En este momento estĂĄ deshabilitada.\n"
+"\n"
+"¿Qué desea hacer?"
-#: ../../network/ethernet.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
+msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""
-"¿Qué cliente dhcp desea utilizar?\n"
-"dhcp-client es el predeterminado"
+"Ingrese la direcciĂłn IP y el puerto del host cuyas impresoras desea utilizar."
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"No se encontrĂł tarjeta PCI RDSI. Por favor, seleccione una en la pantalla "
-"siguiente."
+msgid "Pipe into command"
+msgstr "Enviar el trabajo a un comando"
-#: ../../network/isdn.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
msgstr ""
-"Se ha detectado una tarjeta RDSI PCI, pero no se conoce el tipo. Por favor, "
-"seleccione una tarjeta PCI en la pantalla siguiente."
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "ÂżCuĂĄl de las siguientes es su tarjeta RDSI?"
+"AlgĂșn hardware de su computadora necesita controladores \"propietarios\" "
+"para funcionar.\n"
+"Puede encontrar informaciĂłn sobre ellos en: %s"
-#: ../../network/isdn.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "ISDN Configuration"
-msgstr "ConfiguraciĂłn de RDSI"
+msgid "Detecting devices..."
+msgstr "Detectando los dispositivos..."
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Abort"
-msgstr "Abortar"
+msgid "Click here to launch the wizard ->"
+msgstr "Haga clic aquĂ­ para lanzar el asistente ->"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Continue"
-msgstr "Continuar"
+msgid "Haiti"
+msgstr "HaitĂ­"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
+"Description of the fields:\n"
"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
msgstr ""
+"DescripciĂłn de los campos:\n"
"\n"
-"Si tiene una tarjeta ISA, los valores de la prĂłxima pantalla deberĂ­an ser "
-"correctos.\n"
-"\n"
-"Si tiene una tarjeta PCMCIA, tiene que saber la irq y la e/s de su tarjeta.\n"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "I don't know"
-msgstr "No lo sé"
-
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "PCI"
-msgstr "PCI"
+msgid "the name of the CPU"
+msgstr "el nombre de la CPU"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "Refreshing printer data..."
+msgstr "Refrescando datos de impresora ..."
-#: ../../network/isdn.pm:1
+#: ../../install2.pm:1
#, c-format
-msgid "What kind of card do you have?"
-msgstr "¿Qué tipo de tarjeta tiene?"
+msgid "You must also format %s"
+msgstr "TĂș tambiĂ©n debes formatear %s"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr "Se encontrĂł la interfaz \"%s\", Âżdesea utilizarla?"
+msgid "Be careful: this operation is dangerous."
+msgstr "Cuidado: esta operaciĂłn es peligrosa."
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "¿Qué protocolo desea utilizar?"
+msgid "Insert a floppy containing package selection"
+msgstr "Introduzca un disquete que contenga la selecciĂłn de paquetes"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Protocolo para el resto del mundo"
+msgid "Server: "
+msgstr "Servidor: "
-#: ../../network/isdn.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-"Protocolo para el resto del mundo \n"
-" sin canal D (lĂ­neas alquiladas)"
+msgid "Security Alerts:"
+msgstr "Alertas de seguridad:"
-#: ../../network/isdn.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "European protocol"
-msgstr "Protocolo europeo"
+msgid "Sweden"
+msgstr "Suecia"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Protocolo europeo (EDSS1)"
+msgid "Use Expect for SSH"
+msgstr "Usar Expect para SSH"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
-msgstr ""
-"Seleccione su proveedor.\n"
-" Si no estĂĄ en la lista, elija No listado"
+msgid "Poland"
+msgstr "Polonia"
-#: ../../network/isdn.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "External ISDN modem"
-msgstr "MĂłdem RDSI externo"
+msgid "Importance: %s\n"
+msgstr "Importancia: %s\n"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Internal ISDN card"
-msgstr "Tarjeta RDSI interna"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr ""
+"Por favor, marque si desea expulsar su cinta luego de la copia de seguridad."
-#: ../../network/isdn.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "¿De qué tipo es su conexión RDSI?"
+msgid "Other ports"
+msgstr "Otros puertos"
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Network Configuration Wizard"
-msgstr "Asistente para la configuraciĂłn de la red"
+msgid "number of capture buffers for mmap'ed capture"
+msgstr "Cantidad de bĂșferes de captura para la captura con mmap"
-#: ../../network/isdn.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "ConfiguraciĂłn antigua (isdn4net)"
+msgid "SMBus controllers"
+msgstr "Controladores SMBus"
-#: ../../network/isdn.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "New configuration (isdn-light)"
-msgstr "ConfiguraciĂłn nueva (isdn-light)"
+msgid "Connection timeout (in sec)"
+msgstr "Demora de la conexiĂłn (en seg)"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
msgstr ""
-"¿Qué configuración de RDSI prefiere?\n"
-"\n"
-"* La configuraciĂłn antigua utiliza isdn4net. Tiene herramientas\n"
-" poderosas, pero es algo complicada de configurar para un recién \n"
-" llegado, y no es estĂĄndar.\n"
-"* La configuraciĂłn nueva es mĂĄs fĂĄcil de entender, mĂĄs estĂĄndar,\n"
-" pero con menos herramientas.\n"
-"\n"
-"Le recomendamos la configuraciĂłn ligera (esto es, la nueva).\n"
+"Algunos de los primeros chips i486DX-100 no pueden volver a modo operativo "
+"sin problemas luego que se ejecuta la instrucciĂłn \"halt\""
-#: ../../network/modem.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do nothing"
-msgstr "Hacer nada"
+msgid "Croatian"
+msgstr "Croata"
-#: ../../network/modem.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Use existing partition"
+msgstr "Usar la particiĂłn existente"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Install rpm"
-msgstr "Instalar rpm"
+msgid "Unable to contact mirror %s"
+msgstr "No se puede contactar al sitio de réplica %s"
-#: ../../network/modem.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
-msgstr ""
-"winmodem basado en \"%s\" detectado, Âżdesea instalar el software necesario?"
+msgid "/Help/_About..."
+msgstr "/Ayuda/_Acerca..."
-#: ../../network/modem.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Title"
-msgstr "TĂ­tulo"
+msgid "Remove user directories before restore."
+msgstr "Borrar directorios de los usuarios antes de restaurar."
-#: ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
msgstr ""
-"El sistema no soporta a su mĂłdem.\n"
-"Eche un vistazo en http://www.linmodems.org"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Segundo servidor DNS (opcional)"
+"Va a configurar una impresora remota. Para esto, se necesita un acceso a la "
+"red funcionando, pero aĂșn no ha configurado su red. Si sigue sin "
+"configuraciĂłn de red, no podrĂĄ utilizar la impresoara que estĂĄ configurando "
+"ahora. ÂżCĂłmo desea proceder?"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Primer servidor DNS (opcional)"
+msgid "CUPS printer configuration"
+msgstr "ConfiguraciĂłn de impresora CUPS"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Domain name"
-msgstr "Nombre de dominio"
+msgid "could not find any font in your mounted partitions"
+msgstr "no se pueden encontrar tipografĂ­as en las particiones montadas"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "CHAP"
-msgstr "CHAP"
+msgid "F00f bug"
+msgstr "Bug F00F"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Script-based"
-msgstr "Por script"
+msgid "XFree %s"
+msgstr "XFree %s"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Terminal-based"
-msgstr "Por terminal"
+msgid ""
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
+msgstr ""
+"¿Qué cliente dhcp desea utilizar?\n"
+"dhcp-client es el predeterminado"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid "Domain Name:"
+msgstr "Nombre de dominio:"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "Login ID"
-msgstr "ID de conexiĂłn"
+msgid "On Floppy"
+msgstr "En disquete"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Phone number"
-msgstr "NĂșmero de telĂ©fono"
+msgid "Restore"
+msgstr "Restaurar"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Connection name"
-msgstr "Nombre de la conexiĂłn"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
+msgstr ""
+"si se pone en sĂ­, verificar si los dispositivos de red estĂĄn en modo "
+"promiscuo."
-#: ../../network/modem.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Dialup options"
-msgstr "Opciones de llamada por mĂłdem"
+msgid "Looking for available packages..."
+msgstr "Buscando los paquetes disponibles..."
-#: ../../network/modem.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Seleccione el puerto serie al que estĂĄ conectado su mĂłdem."
+msgid "Init Message"
+msgstr "Mensaje de inicio"
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Network Configuration"
-msgstr "ConfiguraciĂłn de la red"
+msgid "Rescue partition table"
+msgstr "Rescatar la tabla de particiones"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
-msgstr ""
-"Ocurrieron problemas durante la configuraciĂłn.\n"
-"Verifique su conexiĂłn con net_monitor o mcc. Si su conexiĂłn no funciona, "
-"puede que desee volver a iniciar la configuraciĂłn"
+msgid "Connection complete."
+msgstr "ConexiĂłn completa."
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Después de esto, se recomienda que reinicie su entorno X\n"
-"para evitar el problema del cambio del nombre de la mĂĄquina."
+msgid "Cyprus"
+msgstr "Chipre"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Felicidades, la configuraciĂłn de la red y de Internet ha terminado.\n"
-"\n"
-"Ahora se aplicarĂĄ la configuraciĂłn a su sistema.\n"
+msgid "Remove from RAID"
+msgstr "Quitar del RAID"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
+msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr ""
-"OcurriĂł un problema mientras se reiniciaba la red: \n"
-"\n"
-"%s"
+"Esta clave de cifrado es demasiado simple\n"
+"(tiene que tener por lo menos una longitud de %d caracteres)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr "Se necesita reiniciar la red. ÂżDesea reiniciarla?"
+msgid "Configuration Wizards"
+msgstr "Asistentes de configuraciĂłn"
#: ../../network/netconnect.pm:1
#, c-format
-msgid "Network configuration"
-msgstr "ConfiguraciĂłn de la red"
+msgid "ISDN connection"
+msgstr "ConexiĂłn RDSI"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "ÂżDesea iniciar su conexiĂłn al arrancar?"
+msgid "primary"
+msgstr "primario"
-#: ../../network/netconnect.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Internet connection"
-msgstr "ConexiĂłn a Internet"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr " en servidor SMB/Windows \"%s\", compartida como \"%s\""
-#: ../../network/netconnect.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
+"\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
msgstr ""
-"Ha configurado mĂșltiples formas de conectarse a Internet.\n"
-"Seleccione la que quiere utilizar.\n"
+"Este diĂĄlogo se usa para elegir los servicios que desea iniciar durante el\n"
+"arranque.\n"
+"\n"
+"DrakX listarĂĄ todos los servicios disponibles con la instalaciĂłn corriente.\n"
+"Debe revisarlos con cuidado y quitar la marca de aquellos que no siempre\n"
+"son necesarios al arrancar.\n"
"\n"
+"Cuando se selecciona un servicio obtendrå un pequeño texto explicativo\n"
+"acerca del mismo. Sin embargo, si no estĂĄ seguro si un servicio es Ăștil o\n"
+"no, es mĂĄs seguro dejar el comportamiento predeterminado.\n"
+"\n"
+"!! Tenga mucho cuidado en esta etapa si pretende usar su mĂĄquina como un\n"
+"servidor: probablemente no desearĂĄ arrancar servicios que no necesita. Por\n"
+"favor recuerde que varios servicios pueden ser peligrosos si se habilitan\n"
+"en un servidor. En general, seleccione sĂłlo aquellos servicios que\n"
+"realmente necesita. !!"
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Elija la conexiĂłn que desea configurar"
+msgid "Skip"
+msgstr "Omitir"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "ethernet card(s) detected"
-msgstr "tarjeta(s) de red detectada(s)"
+msgid "Niue"
+msgstr "Niue"
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "LAN connection"
-msgstr "ConexiĂłn a la red local"
+msgid ""
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
+msgstr ""
+"Activa/desactiva todas las interfaces de red configuradas para iniciarse\n"
+"en el arranque del sistema."
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "cable connection detected"
-msgstr "detectada conexiĂłn por cable"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid ""
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
+msgstr ""
+"La frecuencia de la CPU en MHz (Megahertz que en una primera aproximaciĂłn se "
+"puede considerar como la cantidad de millones instrucciones que la CPU puede "
+"ejecutar por segundo)"
-#: ../../network/netconnect.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Cable connection"
-msgstr "ConexiĂłn por cable"
+msgid "important"
+msgstr "importante"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "detected"
-msgstr "detectada"
+msgid "Total Progress"
+msgstr "Progreso total"
-#: ../../network/netconnect.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "ADSL connection"
-msgstr "ConexiĂłn ADSL"
+msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
+"\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
+"\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
+"\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
+msgstr ""
+"DrakX primero detectarĂĄ cualquier dispositivo IDE presente en su\n"
+"computadora. También buscarå una o mås tarjetas SCSI PCI en su sistema. Si\n"
+"se encuentra una tarjeta SCSI, DrakX instalarĂĄ el controlador apropiado\n"
+"automĂĄticamente.\n"
+"\n"
+"Debido a que la detecciĂłn de hardware a veces puede no detectar alguna\n"
+"pieza de hardware, DrakX puede no detectar sus discos rĂ­gidos. De ser asĂ­,\n"
+"tendrĂĄ que especificar su hardware a mano.\n"
+"\n"
+"Si tiene que seleccionar su adaptador SCSI PCI manualmente, DrakX le\n"
+"preguntarĂĄ si desea especificar opciones para el mismo. DeberĂ­a permitir\n"
+"que DrakX sondee el hardware buscando las opciones especĂ­ficas necesarias\n"
+"para inicializar el adaptador. La mayorĂ­a de las veces, DrakX pasarĂĄ esta\n"
+"etapa sin problema alguno.\n"
+"\n"
+"Si DrakX no puede sondear las opciones para determinar automåticamente qué\n"
+"parĂĄmetros deben pasarse, necesitarĂĄ configurar manualmente el controlador."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "detected %s"
-msgstr "detectada %s"
+msgid "Users"
+msgstr "Usuarios"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "ISDN connection"
-msgstr "ConexiĂłn RDSI"
+msgid "Aruba"
+msgstr "Aruba"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Winmodem connection"
-msgstr "ConexiĂłn por winmodem"
+msgid "Preparing bootloader..."
+msgstr "Preparando el cargador de arranque"
-#: ../../network/netconnect.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "detected on port %s"
-msgstr "detectada en el puerto %s"
+msgid "Gateway (e.g. %s)"
+msgstr "Pasarela de red (ej %s)"
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Normal modem connection"
-msgstr "ConexiĂłn normal por mĂłdem"
+msgid "The passwords do not match"
+msgstr "Las contraseñas no coinciden"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detecting devices..."
-msgstr "Detectando los dispositivos..."
+msgid "Examples for correct IPs:\n"
+msgstr "Ejemplos de IP correctas:\n"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Expert Mode"
-msgstr "Modo experto"
+msgid "Frequency (MHz)"
+msgstr "Frecuencia (MHz)"
-#: ../../network/netconnect.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Use auto detection"
-msgstr "Usar detecciĂłn automĂĄtica"
+msgid ""
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
+msgstr ""
+"Para utilizar esta selecciĂłn de paquetes salvada, arranque la instalaciĂłn "
+"con \"linux defcfg=floppy\""
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Choose the profile to configure"
-msgstr "Elija el perfil a configurar"
+msgid "the number of the processor"
+msgstr "el nĂșmero del procesador"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Bienvenido al asistente para la configuraciĂłn de la red\n"
-"\n"
-"Estamos a punto de configurar su conexiĂłn de red/Internet.\n"
-"Si no desea usar la detecciĂłn automĂĄtica, desmarque la casilla.\n"
+msgid "Hardware clock set to GMT"
+msgstr "Reloj interno puesto a GMT"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Puesto que estĂĄ realizando una instalaciĂłn por red, su red ya estĂĄ "
-"configurada.\n"
-"Haga clic sobre aceptar para mantener su configuraciĂłn, o pulse cancelar "
-"para\n"
-"volver a configurar sus conexiones de red y a Internet.\n"
+msgid "Give a file name"
+msgstr "Indique el nombre de un archivo"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Ahora vamos a configurar la conexiĂłn %s.\n"
-"\n"
-"\n"
-"Pulse siguiente para continuar."
+msgid "Please choose the port that your printer is connected to."
+msgstr "Por favor, elija el puerto al que estĂĄ conectado su impresora."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Ahora vamos a configurar la conexiĂłn %s."
+msgid "Change Cd-Rom"
+msgstr "Cambie el CD-ROM"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet connection & configuration"
-msgstr "ConfiguraciĂłn y conexiĂłn a Internet"
+msgid "Paraguay"
+msgstr "Paraguay"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
+msgstr "Usar respaldos incrementales (no reemplazar respaldos antiguos)"
+
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Configure the connection"
-msgstr "Configurar la conexiĂłn"
+msgid "There's no known driver for your sound card (%s)"
+msgstr "No hay un controlador conocido para su tarjeta de sonido (%s)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Disconnect"
-msgstr "Desconectar"
+msgid "force"
+msgstr "forzar"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Connect"
-msgstr "Conectar"
+msgid "Exit"
+msgstr "Salir"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\n"
-"You can reconfigure your connection."
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
msgstr ""
-"\n"
-"Puede volver a configurar su conexiĂłn."
+"NOTA: Dependiendo del modelo de la impresora y del sistema de impresiĂłn, se "
+"instalarĂĄn hasta %d MB de software adicional."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
msgstr ""
-"\n"
-"Se puede conectar a Internet o volver a configurar su conexiĂłn."
+"No tiene configurada ninguna interfaz.\n"
+"Configure la primera haciendo clic sobre 'Configurar'"
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "Ahora no estĂĄ conectado a Internet."
+msgid "Estonian"
+msgstr "Estonio"
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""
-"\n"
-"Puede desconectarse o volver a configurar su conexiĂłn."
+"Apache es un servidor de pĂĄginas web. Se usa para servir archivos HTML y "
+"programas CGI."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "You are currently connected to the Internet."
-msgstr "Ahora estĂĄ conectado a Internet."
+msgid "Add/Del Clients"
+msgstr "Añadir/Quitar clientes"
-#: ../../network/network.pm:1
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "La Url deberĂ­a empezar con 'ftp:' o 'http:'"
+msgid "Choose the network interface"
+msgstr "Elija la interfaz de red"
-#: ../../network/network.pm:1
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Proxy should be http://..."
-msgstr "El nombre del proxy debe ser http://..."
+msgid "Unknown Model"
+msgstr "Modelo desconocido"
-#: ../../network/network.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "FTP proxy"
-msgstr "Proxy FTP"
+msgid "CD/DVD burners"
+msgstr "Grabadoras de CD/DVD"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "HTTP proxy"
-msgstr "Proxy HTTP"
+msgid ""
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"ParticiĂłn predeterminada de arranque\n"
+" (para arranque de MS-DOS, no para lilo)\n"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Proxies configuration"
-msgstr "ConfiguraciĂłn de los proxies"
+msgid "choose image"
+msgstr "elija imagen"
-#: ../../network/network.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "Las direcciones de la pasarela deberĂ­an estar en el formato 1.2.3.4"
+msgid "Firewalling configuration detected!"
+msgstr "ÂĄSe detectĂł la configuraciĂłn del cortafuegos!"
-#: ../../network/network.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "Las direcciones del servidor DNS deberĂ­an estar en el formato 1.2.3.4"
+msgid "Connection name"
+msgstr "Nombre de la conexiĂłn"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Gateway device"
-msgstr "Dispositivo de pasarela de red"
+msgid ""
+"x coordinate of text box\n"
+"in number of characters"
+msgstr ""
+"coordenada x del cuadro de texto\n"
+"en cantidad de caracteres"
-#: ../../network/network.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Pasarela de red (ej %s)"
+msgid "Updating package selection"
+msgstr "Actualizando la selecciĂłn de paquetes"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DNS server"
-msgstr "Servidor DNS"
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "ÂżDĂłnde desea montar el archivo de loopback %s?"
-#: ../../network/network.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
msgstr ""
-"Por favor, defina el nombre de su mĂĄquina.\n"
-"El nombre de su mĂĄquina deberĂ­a ser un nombre de mĂĄquina clasificado "
-"completamente,\n"
-"como \"mimaquina.milabo.micompa.com\".También puede introducir la dirección "
-"IP de la pasarela si tiene una"
+"El disquete ha sido generado satisfactoriamente.\n"
+"Ahora puede repetir su instalaciĂłn."
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
-"La tasa deberĂ­a tener el sufijo k, M o G (por ejemplo, \"11M\" para 11M), o "
-"añadir suficientes '0' (ceros)"
+msgid "the number of buttons the mouse has"
+msgstr "la cantidad de botones que tiene el ratĂłn"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
msgstr ""
-"La frec. deberĂ­a tener el sufijo k, M o G (por ejemplo, \"2.46G\" para una "
-"frec. de 2.46 GHz), o añadir suficientes '0' (ceros)"
-
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Las direcciones IP deben estar en el formato 1.2.3.4"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Start at boot"
-msgstr "Iniciar al arrancar"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Asignar nombre de mĂĄquina desde direcciĂłn DHCP"
+"Por favor, ingrese el directorio (o mĂłdulo) para\n"
+" poner la copia de respaldo en este host."
-#: ../../network/network.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Network Hotplugging"
-msgstr "\"Enchufe en caliente\" de la red"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "Id tarjeta de red (Ăștil para portĂĄtiles)"
+msgid "Replay"
+msgstr "Reproducir"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "DHCP host name"
-msgstr "Nombre de la mĂĄquina DHCP"
+msgid "Backup other files"
+msgstr "Respaldar otros archivos"
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Netmask"
-msgstr "MĂĄscara de red"
+msgid "No floppy drive available"
+msgstr "Ninguna disquetera disponible"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "IP address"
-msgstr "DirecciĂłn IP"
+msgid "Backup files are corrupted"
+msgstr "Los archivos de respaldo estĂĄn corruptos"
-#: ../../network/network.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp/zeroconf)"
+msgid "TV norm:"
+msgstr "Norma de TV:"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Automatic IP"
-msgstr "DirecciĂłn IP automĂĄtica"
+msgid "Cpuid family"
+msgstr "Familia de cpuid"
-#: ../../network/network.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid " (driver %s)"
-msgstr " (controlador %s)"
+msgid "32 MB"
+msgstr "32 MB"
-#: ../../network/network.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configuring network device %s"
-msgstr "Configurando el dispositivo de red %s"
+msgid "Lithuanian AZERTY (new)"
+msgstr "Lituano AZERTY (nuevo)"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
msgstr ""
-"Por favor, introduzca la direcciĂłn IP de esta mĂĄquina.\n"
-"Cada valor tiene que introducirse como una direcciĂłn IP en notaciĂłn\n"
-"decimal con puntos (por ejemplo: 1.2.3.4)."
+"sĂ­, siginfica que el coprocesador matemĂĄtico tiene adjunto un vector de "
+"excepciones"
-#: ../../network/network.pm:1
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
msgstr ""
-"ADVERTENCIA: Previamente se ha configurado este dispositivo para conectarse "
-"con Internet.\n"
-"Simplemente acepte para mantener la configuraciĂłn del dispositivo.\n"
-"Al modificar los campos de abajo se ignorarĂĄ esta configuraciĂłn."
+"EligiĂł una particiĂłn RAID en software como particiĂłn raĂ­z (/).\n"
+"NingĂșn cargador de arranque es capaz de manejar esto sin una particiĂłn /"
+"boot.\n"
+"Por favor, asegĂșrese de añadir una particiĂłn /boot."
-#: ../../network/shorewall.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
-msgstr ""
-"ÂĄAtenciĂłn! Se ha detectado la configuraciĂłn del cortafuegos existente. Puede "
-"que necesite algĂșn ajuste manual tras la instalaciĂłn."
+msgid "Previous"
+msgstr "Anterior"
-#: ../../network/shorewall.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "ÂĄSe detectĂł la configuraciĂłn del cortafuegos!"
+msgid "Other OS (MacOS...)"
+msgstr "Otro SO (MacOS...)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Account Password"
-msgstr "Contraseña de la cuenta"
+msgid "To activate the mouse,"
+msgstr "Para activar el ratĂłn,"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Account Login (user name)"
-msgstr "Usuario de la cuenta (nombre de usuario)"
+msgid "Bringing up the network"
+msgstr "Levantando la red"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../common.pm:1
#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Demora de la conexiĂłn (en seg)"
+msgid "Screenshots will be available after install in %s"
+msgstr ""
+"Luego de la instalaciĂłn estarĂĄn disponibles las instantĂĄneas de pantalla en %"
+"s"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Connection speed"
-msgstr "Velocidad de la conexiĂłn"
+msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
+msgstr ""
+"Se ha detectado mĂĄs de una particiĂłn Microsoft Windows en su disco rĂ­gido.\n"
+"Por favor, elija aquella a la cual desea cambiar el tamaño para poder\n"
+"instalar su sistema operativo Mandrake Linux nuevo.\n"
+"\n"
+"Cada particiĂłn se lista como sigue: \"Nombre Linux\", \"Nombre Windows\",\n"
+"\"Capacidad\".\n"
+"\n"
+"\"Nombre Linux\" estĂĄ estructurado: \"tipo de disco rĂ­gido\", \"nĂșmero de\n"
+"disco rĂ­gido\", \"nĂșmero de particiĂłn\" (por ejemplo, \"hda1\").\n"
+"\n"
+"\"Tipo de disco rĂ­gido\" es \"hd\" si su disco es un disco IDE y \"sd\" si\n"
+"el mismo es un disco SCSI.\n"
+"\n"
+"\"NĂșmero de disco rĂ­gido\" siempre es una letra que sigue a \"hd\" o a\n"
+"\"sd\". Para los discos IDE:\n"
+"\n"
+" * \"a\" significa \"disco rĂ­gido maestro en la controladora IDE\n"
+"primaria\",\n"
+"\n"
+" * \"b\" significa \"disco rĂ­gido esclavo en la controladora IDE\n"
+"primaria\",\n"
+"\n"
+" * \"c\" significa \"disco rĂ­gido maestro en la controladora IDE\n"
+"secundaria\",\n"
+"\n"
+" * \"d\" significa \"disco rĂ­gido esclavo en la controladora IDE\n"
+"secundaria\".\n"
+"\n"
+"Para los discos SCSI, una \"a\" significa \"SCSI ID menor\", una \"b\"\n"
+"significa \"segunda SCSI ID menor\", etc.\n"
+"\n"
+"\"Nombre Windows\" es la letra de su unidad de disco bajo Windows (el\n"
+"primer disco o particiĂłn se denomina \"C:\")."
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Dialing mode"
-msgstr "Modo de marcaciĂłn"
+msgid "Tanzania"
+msgstr "Tanzania"
-#: ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Choose your country"
-msgstr "Elija su paĂ­s"
+msgid "Computing FAT filesystem bounds"
+msgstr "Calculando los lĂ­mites del sistema de archivos FAT"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 2 del proveedor (opcional)"
+msgid ""
+"\n"
+"Backup Sources: \n"
+msgstr ""
+"\n"
+"Fuentes de respaldo: \n"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 1 del proveedor (opcional)"
+msgid "Content of the file"
+msgstr "Contenido del archivo"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Provider phone number"
-msgstr "NĂșmero de telĂ©fono del proveedor"
+msgid "Authentication LDAP"
+msgstr "AutentificaciĂłn LDAP"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Nombre del proveedor (ej proveedor.net)"
+msgid "Let me pick any driver"
+msgstr "Permitirme elegir cualquier controlador"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Your personal phone number"
-msgstr "Su nĂșmero de telĂ©fono personal"
+msgid "Profile "
+msgstr "Perfil "
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Card IO_1"
-msgstr "E/S_1 de la tarjeta"
+msgid "transmitted"
+msgstr "transmitido"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Card IO_0"
-msgstr "E/S_0 de la tarjeta"
+msgid "Palestine"
+msgstr "Palestina"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Card IO"
-msgstr "E/S de la tarjeta"
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Card mem (DMA)"
-msgstr "Memoria (DMA) de la tarjeta"
+msgid "%d comma separated strings"
+msgstr "%d cadenas de caracteres separadas por comas"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Card IRQ"
-msgstr "IRQ de la tarjeta"
+msgid "Here is the full list of keyboards available"
+msgstr "AquĂ­ tiene la lista completa de teclados disponibles"
-#: ../../network/tools.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Please fill or check the field below"
-msgstr "Por favor, complete o verifique el campo de abajo"
+msgid "Theme name"
+msgstr "Nombre del tema"
-#: ../../network/tools.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Connection Configuration"
-msgstr "ConfiguraciĂłn de la conexiĂłn"
+msgid "/_Help"
+msgstr "/A_yuda"
-#: ../../network/tools.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
msgstr ""
-"El sistema no parece estar conectado a la Internet.\n"
-"Intente volver a configurar su conexiĂłn."
-
-#: ../../network/tools.pm:1
-#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Por motivos de seguridad, se desconectarĂĄ ahora."
+"AquĂ­ puede elegir si los escĂĄneres conectados a esta mĂĄquina deberĂ­an poder "
+"accederse desde måquinas remotas y desde qué måquinas remotas."
-#: ../../network/tools.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Ahora el sistema estĂĄ conectado a la Internet."
+msgid "the width of the progress bar"
+msgstr "el ancho de la barra de progreso"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Testing your connection..."
-msgstr "Probando su conexiĂłn..."
+msgid "Cook Islands"
+msgstr "Islas Cook"
-#: ../../network/tools.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "ÂżDesea intentar conectarse a Internet ahora?"
+msgid "Formatting partition %s"
+msgstr "Formateando la particiĂłn %s"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Internet configuration"
-msgstr "ConfiguraciĂłn de Internet"
+msgid "Hostname required"
+msgstr "Se necesita nombre del host"
-#: ../../partition_table/raw.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
-msgstr ""
-"EstĂĄ ocurriendo algo malo en su unidad. \n"
-"Ha fallado una prueba para verificar la integridad de los datos. \n"
-"Esto significa que escribir cualquier cosa en el disco terminarĂĄ produciendo "
-"datos aleatorios, corruptos."
+msgid "Unselect fonts installed"
+msgstr "Desmarcar las tipografĂ­as instaladas"
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid " (Default)"
-msgstr " (Por defecto)"
+msgid "Cancel"
+msgstr "Cancelar"
-#: ../../printer/cups.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "En servidor CUPS \"%s\""
+msgid "Searching for configured scanners ..."
+msgstr "Buscando escĂĄneres configurados ..."
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Remote Printers"
-msgstr "Impresoras remotas"
+msgid "Wheel"
+msgstr "Rueda"
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "CUPS"
-msgstr "CUPS"
+msgid "Videocard"
+msgstr "Tarjeta de vĂ­deo"
-#: ../../printer/cups.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "(on this machine)"
-msgstr "(en esta mĂĄquina)"
+msgid "\tBackups use tar and bzip2\n"
+msgstr "\tRespaldar usando tar y bzip2\n"
-#: ../../printer/cups.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "(on %s)"
-msgstr "(en %s)"
+msgid "Remove Selected"
+msgstr "Quitar los seleccionados."
-#: ../../printer/data.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-"CUPS - Common Unix Printing System (Sistema de impresiĂłn comĂșn de Unix)"
+msgid "/Autodetect _modems"
+msgstr "/Autodetectar _mĂłdems"
-#: ../../printer/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "LPRng"
-msgstr "LPRng"
+msgid "Remove printer"
+msgstr "Borrar impresora"
-#: ../../printer/data.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR de nueva generaciĂłn"
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
+msgstr ""
+"ÂĄADVERTENCIA!\n"
+"\n"
+"Ahora DrakX cambiarå el tamaño de su partición Windows. Proceda con "
+"cuidado:\n"
+"esta operaciĂłn es peligrosa. Si aĂșn no lo hizo, primero deberĂ­a salir de\n"
+"la instalaciĂłn, ejecutar scandisk bajo Windows (y opcionalmente ejecutar "
+"defrag),\n"
+"y luego volver a iniciar la instalación. También debería hacer una copia de\n"
+" seguridad de sus datos.\n"
+"Cuando esté seguro, pulse sobre Aceptar."
-#: ../../printer/data.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "LPD"
-msgstr "LPD"
+msgid "Which services would you like to allow the Internet to connect to?"
+msgstr "¿A qué servicios desearía permitir conectarse desde la Internet?"
-#: ../../printer/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon (Demonio de impresora de lĂ­neas)"
+msgid ""
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
+msgstr ""
+"Bienvenido a la herramienta de configuraciĂłn del correo.\n"
+"\n"
+"AquĂ­ podrĂĄ configurar su sistema de alerta.\n"
-#: ../../printer/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "PDQ"
-msgstr "PDQ"
+msgid "Other"
+msgstr "Otros"
-#: ../../printer/data.pm:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue (Imprimir, no encolar)"
+msgid "Default"
+msgstr "Por defecto"
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Unknown Model"
-msgstr "Modelo desconocido"
+msgid "Button 2 Emulation"
+msgstr "EmulaciĂłn del botĂłn 2"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Unknown model"
-msgstr "Modelo desconocido"
+msgid "type1inst building"
+msgstr "Construyendo Type1"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "%s (Port %s)"
-msgstr "%s (Puerto %s)"
+msgid "Abiword"
+msgstr "Abiword"
-#: ../../printer/main.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Host %s"
-msgstr "Host %s"
+msgid "choose image file"
+msgstr "elija un archivo de imagen"
-#: ../../printer/main.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Network %s"
-msgstr "Red %s"
+msgid "X server"
+msgstr "Servidor X"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Interface \"%s\""
-msgstr "Interfaz \"%s\""
+msgid "Domain Admin User Name"
+msgstr "Nombre de usuario del Administrador del Dominio"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Local network(s)"
-msgstr "Red(es) local(es)"
+msgid "There was an error while scanning for TV channels"
+msgstr "Hubo un error mientras se buscaban canales de TV"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Raw printer (No driver)"
-msgstr "Impresora \"en crudo\" (sin controlador)"
+msgid "US keyboard (international)"
+msgstr "Estadounidense (internacional)"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ", using command %s"
-msgstr ", usando comando %s"
+msgid "Not installed"
+msgstr "No instalado"
-#: ../../printer/main.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr " en servidor Novell \"%s\", impresora \"%s\""
+msgid "LAN connection"
+msgstr "ConexiĂłn a la red local"
-#: ../../printer/main.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr " en servidor SMB/Windows \"%s\", compartida como \"%s\""
+msgid "/File/-"
+msgstr "/Archivo/-"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", host TCP/IP \"%s\", puerto %s"
+msgid "Italian"
+msgstr "Italiano"
-#: ../../printer/main.pm:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr " en servidor LPD \"%s\", impresora \"%s\""
+msgid "Basic"
+msgstr "BĂĄsico"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ", printing to %s"
-msgstr ", imprimiendo en %s"
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
+msgstr ""
+"\n"
+"Copyright (C) 2002 por MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ", multi-function device"
-msgstr ", dispositivo multifunciĂłn"
+msgid "Honduras"
+msgstr "Honduras"
-#: ../../printer/main.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", dispositivo multifunciĂłn en HP JetDirect"
+msgid "pdq"
+msgstr ""
-#: ../../printer/main.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ", multi-function device on USB"
-msgstr ", dispositivo multi-funciĂłn en USB"
+msgid "Card IO"
+msgstr "E/S de la tarjeta"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ", multi-function device on parallel port \\#%s"
-msgstr ", dispositivo multifunciĂłn en puerto paralelo \\#%s"
+msgid "when checked, owner and group won't be changed"
+msgstr "cuando estå marcado, el grupo y el dueño no se cambiarån"
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", USB printer"
-msgstr ", impresora USB"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
+msgstr ""
+"\n"
+"Esta particiĂłn especial de Bootstrap\n"
+"es para el arranque\n"
+"dual de su sistema.\n"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ", USB printer \\#%s"
-msgstr ", impresora USB \\#%s"
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
+msgstr ""
+"Por favor, elija para cada paso si desea que se repita como su instalaciĂłn, "
+"o el mismo serĂĄ manual"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid " on parallel port \\#%s"
-msgstr " en el puerto paralelo \\#%s"
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
+msgstr ""
+"También puede decidir aquí si los escåneres en las måquinas remotas deberían "
+"estar disponibles automĂĄticamente en esta mĂĄquina."
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Local Printers"
-msgstr "Impresoras locales"
+msgid "\t-Network by FTP.\n"
+msgstr "\t-Red por FTP.\n"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Pipe job into a command"
-msgstr "Filtrar el trabajo en un comando"
+msgid "Russian (Yawerty)"
+msgstr "Ruso (Yawerty)"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Enter a printer device URI"
-msgstr "Introduzca el URI del dispositivo de impresiĂłn"
+msgid "You must enter a device or file name!"
+msgstr "Debe introducir un dispositivo un un nombre de archivo"
-#: ../../printer/main.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Printer on NetWare server"
-msgstr "Impresora en un servidor NetWare"
+msgid "/_Quit"
+msgstr "/_Salir"
-#: ../../printer/main.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Impresora en un servidor SMB/Windows 95/98/NT"
+msgid ""
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
+msgstr ""
+"Necesita el microcĂłdigo Alcatel.\n"
+"DescĂĄrguelo en\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"y copie mgmt.o en /usr/share/speedtouch"
-#: ../../printer/main.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Impresora de red (TCP/Socket)"
+msgid "Graphics memory: %s kB\n"
+msgstr "Memoria de la tarjeta grĂĄfica: %s KB\n"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Printer on remote lpd server"
-msgstr "Impresora en un servidor lpd remoto"
+msgid ""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+msgstr ""
+" Este programa es software libre; puede redistribuirlo y/o modificarlo\n"
+" bajo los tĂ©rminos de la Licencia PĂșblica General GNU publicada por la\n"
+" Free Software Foundation; ya sea la versiĂłn 2, o (a su opciĂłn) cualquier\n"
+" versiĂłn posterior.\n"
+"\n"
+" Este programa se distribuye con la esperanza que serĂĄ Ăștil, pero\n"
+" SIN GARANTÍA ALGUNA; incluso sin la garantía implícita de COMERCIABILIDAD\n"
+" o ADECUABILIDAD PARA UN PROPÓSITO PARTICULAR. Consulte la\n"
+" Licencia PĂșblica General GNU para mĂĄs detalles.\n"
+"\n"
+" DeberĂ­a haber recibido una copia de la Licencia PĂșblica General GNU\n"
+" junto con este programa; de no ser asĂ­, escriba a la Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-#: ../../printer/main.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Impresora en un servidor CUPS remoto"
+msgid "access to compilation tools"
+msgstr "acceso a herramientas de compilaciĂłn"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Remote printer"
-msgstr "Impresora remota"
+msgid "Please select data to restore..."
+msgstr "Por favor, seleccione los datos a restaurar..."
-#: ../../printer/main.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Local printer"
-msgstr "Impresora local"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
+msgstr ""
+"Si piensa usar aboot, no olvide dejar espacio libre (2048 sectores es\n"
+"suficiente) al principio del disco"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configuring applications..."
-msgstr "Configurando las aplicaciones..."
+msgid "Standard test page"
+msgstr "PĂĄgina de prueba estĂĄndar"
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
+msgid "Create"
+msgstr "Crear"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Quitando la impresora \"%s\" ..."
+msgid "What"
+msgstr "Qué"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "ÂżSeguro que quiere borrar la impresora \"%s\"?"
+msgid "There was an error ordering packages:"
+msgstr "Hubo un error al ordenar los paquetes:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Remove printer"
-msgstr "Borrar impresora"
+msgid "Bulgarian (BDS)"
+msgstr "BĂșlgaro (BDS)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Learn how to use this printer"
-msgstr "Aprender como usar esta impresora"
+msgid "Disable Server"
+msgstr "Deshabilitar el Servidor"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Print test pages"
-msgstr "Imprimir la(s) pĂĄgina(s) de prueba"
+msgid "Filesystem encryption key"
+msgstr "Clave de cifrado del sistema de archivos"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
-msgstr ""
-"No se pudo quitar la impresora \"%s\" de Star Office/OpenOffice.org/GIMP."
+msgid "Gujarati"
+msgstr "Indio (Gujarati)"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
msgstr ""
-"La impresora \"%s\" se quitĂł satisfactoriamnete de Star Office/OpenOffice."
-"org."
+"Por favor, seleccione el primer nĂșmero del rango de 10 que desee\n"
+"editar, o pulse Intro para continuar.\n"
+"ÂżSu elecciĂłn?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Quitando la impresora de Star Office/OpenOffice.org/GIMP"
+msgid "Save theme"
+msgstr "guardar tema"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Quitar esta impresora de Star Office/OpenOffice.org/GIMP"
+msgid "group"
+msgstr "grupo"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-"No se pudo agregar la impresora \"%s\" a Star Office/OpenOffice.org/GIMP."
+msgid "Brazil"
+msgstr "Brasil"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-"La impresora \"%s\" se agregĂł satisfactoriamente a Star Office/OpenOffice."
-"org."
+msgid "Auto Install"
+msgstr "InstalaciĂłn automĂĄtica"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Agregando impresora a Star Office/OpenOffice.org/GIMP"
+msgid "Network Configuration Wizard"
+msgstr "Asistente para la configuraciĂłn de la red"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Agregar esta impresora a Star Office/OpenOffice.org/GIMP"
+msgid "Removable media automounting"
+msgstr "Montaje automĂĄtico de dispositivos extraĂ­bles"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "La impresora \"%s\" ahora es la impresora predeterminada."
+msgid "Printing"
+msgstr "Imprimiendo"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Default printer"
-msgstr "Impresora predeterminada"
+msgid "Unkown driver"
+msgstr "Controlador desconocido"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Set this printer as the default"
-msgstr "Poner esta impresora como predeterminada"
+msgid ""
+"There are no printers found which are directly connected to your machine"
+msgstr "No se encontraron impresoras conectadas directamente a su mĂĄquina"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printer options"
-msgstr "Opciones de la impresora"
+msgid "Create a new partition"
+msgstr "Crear una particiĂłn nueva"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Printer manufacturer, model"
-msgstr "Fabricante de la impresora, modelo"
+msgid "Driver:"
+msgstr "Controlador:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "Fabricante de la impresora, modelo, controlador"
+msgid "unknown"
+msgstr "desconocido"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Quitando la impresora antigua \"%s\" ..."
+msgid "Use fdisk"
+msgstr "Usar fdisk"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Printer name, description, location"
-msgstr "Nombre de la impresora, descripciĂłn, ubicaciĂłn"
+msgid "MOVE YOUR WHEEL!"
+msgstr "ÂĄMUEVA SU RUEDA!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Printer connection type"
-msgstr "Tipo de conexiĂłn de la impresora"
+msgid "sent: "
+msgstr "enviado: "
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Raw printer"
-msgstr "Impresora en crudo"
+msgid "Automatic IP"
+msgstr "DirecciĂłn IP automĂĄtica"
-#: ../../printer/printerdrake.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Do it!"
-msgstr "ÂĄHacerlo!"
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+" Note that two different options are available after clicking the button:\n"
+"\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
+msgstr ""
+"Ya estĂĄ. Ahora la instalaciĂłn estĂĄ completa y su sistema GNU/Linux estĂĄ\n"
+"listo para ser utilizado. Simplemente haga clic sobre \"%s\" para volver a\n"
+"arrancar el sistema. Lo primero que deberĂ­a ver tan pronto como su mĂĄquina\n"
+"haya finalizado sus pruebas de hardware, es el menĂș del cargador de\n"
+"arranque dĂĄndole la opciĂłn de elegir que sistema operativo arrancar.\n"
+"\n"
+"El botĂłn \"%s\" le muestra dos botones mĂĄs para:\n"
+"\n"
+" * \"%s\": para crear un disquete de instalaciĂłn que realizarĂĄ una\n"
+"instalaciĂłn completa automĂĄticamente, sin la asistencia de un operador,\n"
+"similar a la instalación que ha configurado recién.\n"
+"\n"
+" Note que hay dos opciones diferentes disponibles después de hacer clic\n"
+"sobre el botĂłn:\n"
+"\n"
+" * \"%s\" . Esta es una instalaciĂłn parcialmente automatizada. La etapa\n"
+"de particionado es el Ășnico procedimiento interactivo.\n"
+"\n"
+" * \"%s\" . InstalaciĂłn completamente automatizada: el disco rĂ­gido se\n"
+"sobreescribe por completo, y se pierden todos los datos.\n"
+"\n"
+" Esta caracterĂ­stica es muy Ăștil cuando se instala una cantidad grande de\n"
+"måquinas similares. Consulte la sección Auto install (en inglés) en nuestro\n"
+"sitio web para mĂĄs informaciĂłn.\n"
+"\n"
+" * \"%s\"(*): guarda una lista de los paquetes seleccionados en esta\n"
+"instalaciĂłn. Para usar esta selecciĂłn con otra instalaciĂłn, inserte el\n"
+"disquete en la disquetera y comience la instalaciĂłn. En el prompt, presione\n"
+"la tecla [F1], y a continuaciĂłn ingrese >>linux defcfg=\"floppy\"<<.\n"
+"\n"
+"(*) Necesita un disquete formateado con FAT (para crear uno bajo GNU/Linux\n"
+"teclee \"mformat a:\")"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Close"
-msgstr "Cerrar"
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Impresora %s\n"
-"¿Qué desea modificar de esta impresora?"
+msgid "Configuration of a remote printer"
+msgstr "ConfiguraciĂłn de una impresora remota"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Modify printer configuration"
-msgstr "Modificar configuraciĂłn de la impresora"
+msgid "Moldova"
+msgstr "Moldavia"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add a new printer"
-msgstr "Añadir una impresora nueva"
+msgid "Please check if you want to erase your tape before the backup."
+msgstr "Por favor, marque si primero desea borrar su cinta."
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Normal Mode"
-msgstr "Modo normal"
+msgid "An online platform to respond to enterprise support needs."
+msgstr ""
+"Una plataforma en lĂ­nea para responder a las necesidades especĂ­ficas de "
+"soporte de la compañía."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Change the printing system"
-msgstr "Cambiar el sistema de impresiĂłn"
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "La Url deberĂ­a empezar con 'ftp:' o 'http:'"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "CUPS configuration"
-msgstr "ConfiguraciĂłn de CUPS"
+msgid "Add a new rule at the end"
+msgstr "Añadir una regla nueva al final"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
msgstr ""
-"Refrescar la lista de impresoras (para visualizar todas las impresoras CUPS "
-"remotas)"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr "Mostrar todas las impresoras CUPS remotas"
+"También puede decidir aquí si las impresoras en las måquinas remotas "
+"deberĂ­an estar disponibles automĂĄticamente en esta mĂĄquina."
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
msgstr ""
-"EstĂĄn configuradas las impresoras siguientes. Haga doble clic sobre una de "
-"ellas para modificarla, para configurarla como predeterminada, o para "
-"obtener informaciĂłn sobre la misma."
+"AquĂ­ deben ir las diferentes opciones para el mĂłdulo %s.\n"
+"Las opciones son de la forma \"nombre=valor nombre2=valor2 ...\".\n"
+"Por ejemplo, \"io=0x300 irq=7\""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printing system: "
-msgstr "Sistema de impresiĂłn: "
+msgid "Quit without writing the partition table?"
+msgstr "ÂżSalir del programa sin grabar la tabla de particiones?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Checking installed software..."
-msgstr "Verificando software instalado..."
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Installing Foomatic..."
-msgstr "Instalando Foomatic ..."
+msgid "Installing packages..."
+msgstr "Instalando paquetes..."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "ÂĄFallĂł la configuraciĂłn de la impresora \"%s\"!"
+msgid "Dutch"
+msgstr "Holandés"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Configurando la impresora \"%s\" ..."
+msgid "The following packages need to be installed:\n"
+msgstr "Se deben instalar los siguientes paquetes:\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Reading printer data..."
-msgstr "Leyendo los datos de la impresora ..."
+msgid "Angola"
+msgstr "Angola"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "¿Qué sistema de impresión (spooler) desea usar?"
+msgid "service setting"
+msgstr "configuraciĂłn del servicio"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Select Printer Spooler"
-msgstr "Seleccione sistema de impresiĂłn (spooler)"
+msgid "Custom"
+msgstr "Personalizada"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Setting Default Printer..."
-msgstr "Configurando impresora predeterminada..."
+msgid "File is already used by another loopback, choose another one"
+msgstr "El archivo ya lo utiliza otro dispositivo loopback, seleccione otro"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Installing %s ..."
-msgstr "Instalando %s ..."
+msgid "Read-only"
+msgstr "SĂłlo lectura"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Removing %s ..."
-msgstr "Quitando %s ..."
+msgid "Latvia"
+msgstr "Letonia"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"El sistema de impresiĂłn (%s) no se iniciarĂĄ automĂĄticamente cuando arranque "
-"la mĂĄquina.\n"
-"\n"
-"Es posible que el inicio automĂĄtico se desactivĂł al cambiar a un nivel de "
-"seguridad mayor, porque el sistema de impresiĂłn es un potencial punto de "
-"ataques.\n"
-"\n"
-"ÂżDesea volver a activar el inicio automĂĄtico de la impresiĂłn cuando el "
-"sistema se vuelva a encender?"
+msgid "No known driver"
+msgstr "No hay controlador conocido"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Iniciar el sistema de impresiĂłn al arrancar"
+msgid "1 MB"
+msgstr "1 MB"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
+msgstr ""
+"Si no es una de las que desea configurar, introduzca un nombre de "
+"dispositivo o archivo en la lĂ­nea de entrada"
+
+#: ../../standalone/draksound:1
+#, c-format
+msgid ""
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
"\n"
-"Do you really want to configure printing on this machine?"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-"Va a instalar el sistema de impresiĂłn %s sobre un sistema corriendo en el "
-"nivel de seguridad %s.\n"
+"No se detectĂł tarjeta de sonido en su mĂĄquina. Por favor, verifique que "
+"tiene conectada correctamente una tarjeta de sonido soportada por Linux.\n"
"\n"
-"Este sistema de impresiĂłn ejecuta un demonio (proceso en segundo plano) que "
-"espera trabajos de impresiĂłn y los gestiona. Las mĂĄquinas remotas pueden "
-"acceder también a este demonio a través de la red, así que es un potencial "
-"punto de ataque. Por eso, sĂłlo unos pocos demonios seleccionados se inician "
-"por defecto en este nivel de seguridad.\n"
"\n"
-"ÂżSeguro que desea configurar la impresiĂłn para esta mĂĄquina?"
+"Puede visitar nuestra base de datos de hardware en:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Instalando un sistema de impresiĂłn en el nivel de seguridad %s"
+msgid "Configure Local Area Network..."
+msgstr "Configurar la red de ĂĄrea local..."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "paranoid"
-msgstr "Paranoica"
+msgid "Launch the sound system on your machine"
+msgstr "Lanza el sistema de sonido en su mĂĄquina"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "high"
-msgstr "Alta"
+msgid "Preparing printer database..."
+msgstr "Preparando base de datos de impresoras ..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Restarting printing system..."
-msgstr "Reiniciando el sistema de impresiĂłn ..."
+msgid "Information"
+msgstr "InformaciĂłn"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Configuration of a remote printer"
-msgstr "ConfiguraciĂłn de una impresora remota"
+msgid "No network card"
+msgstr "Sin tarjeta de red"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"El acceso a la red no estaba corriendo y no se puede iniciar. Por favor, "
-"verifique su configuraciĂłn y su hardware. Luego, intente configurar su "
-"impresora remota de nuevo."
+msgid "Which filesystem do you want?"
+msgstr "¿Qué sistema de archivos desea?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"La configuraciĂłn de la red hecha durante la instalaciĂłn no se puede iniciar "
-"ahora. Por favor, verifique si la red se hace accesible tras reiniciar su "
-"sistema y corrija la configuraciĂłn usando el Centro de control de Mandrake, "
-"secciĂłn \"Redes e Internet\"/\"ConexiĂłn\", y tras esto configure la "
-"impresora, también utilizando el Centro de Control de Mandrake, sección "
-"\"Hardware\"/\"Impresora\"."
+msgid "3 buttons"
+msgstr "3 botones"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configure the network now"
-msgstr "Configurar la red ahora"
+msgid "Detailed information"
+msgstr "InformaciĂłn detallada"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Go on without configuring the network"
-msgstr "Continuar sin configurar la red"
+msgid "Malta"
+msgstr "Malta"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
+"Printer default settings\n"
+"\n"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
msgstr ""
-"Va a configurar una impresora remota. Para esto, se necesita un acceso a la "
-"red funcionando, pero aĂșn no ha configurado su red. Si sigue sin "
-"configuraciĂłn de red, no podrĂĄ utilizar la impresoara que estĂĄ configurando "
-"ahora. ÂżCĂłmo desea proceder?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Network functionality not configured"
-msgstr "Funcionalidad de red no configurada"
+"Configuraciones predeterminadas de la impresora\n"
+"\n"
+"Debería asegurarse que el tamaño de pågina y el tipo de tinta/modo de "
+"impresión (si corresponde) y también la configuración de hardware de las "
+"impresoras lĂĄser (memoria, unidad de dĂșplex, bandejas adicionales) estĂĄn "
+"configurados correctamente. Note que una calidad de impresiĂłn o resoluciĂłn "
+"extremadamente alta puede ser bastante lenta."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Starting network..."
-msgstr "Iniciando la red ..."
+msgid "This floppy is not FAT formatted"
+msgstr "Este disquete no estĂĄ formateado con FAT"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Refreshing printer data..."
-msgstr "Refrescando datos de impresora ..."
+msgid "Configuring network"
+msgstr "Configurando la red"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Ha transferido su impresora por defecto anterior (\"%s\"), ÂżDeberĂ­a ser "
-"también la impresora por defecto bajo el nuevo sistema de impresión %s?"
+msgid "Graphic Card"
+msgstr "Tarjeta grĂĄfica"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Transfer printer configuration"
-msgstr "Transferir configuraciĂłn de la impresora"
+msgid "Resizing Windows partition"
+msgstr "Calculando los lĂ­mites del sistema de archivos Windows"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Transferring %s..."
-msgstr "Transfiriendo %s ..."
+msgid "Provider dns 1 (optional)"
+msgstr "DNS 1 del proveedor (opcional)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "New printer name"
-msgstr "Nuevo nombre de la impresora"
+msgid "Cameroon"
+msgstr "CamerĂșn"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"La impresora \"%s\" ya existe,\n"
-"Âżrealmente desea sobre-escribir la configuraciĂłn de la misma?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
msgstr ""
-"El nombre de la impresora sĂłlo deberĂ­a contener letras, nĂșmeros y el guiĂłn "
-"bajo"
+"Ahora puede particionar %s.\n"
+"Cuando haya terminado, no se olvide de guardar usando 'w'"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Transfer"
-msgstr "Transferir"
+msgid "Close"
+msgstr "Cerrar"
-#: ../../printer/printerdrake.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
msgstr ""
-"Ya existe una impresora denominada \"%s\" bajo %s. \n"
-"Haga clic sobre \"Transferir\" para sobre-escribirla.\n"
-"También puede ingresar un nombre nuevo o saltear esta impresora."
+"\"%s\": verifique la selecciĂłn corriente del paĂ­s. Si Usted no se encuentra\n"
+"en este paĂ­s haga clic sobre el botĂłn \"%s\" y elija otro. Si su paĂ­s no se\n"
+"muestra en la primer lista haga clic sobre el botĂłn \"%s\" para obtener la\n"
+"lista completa de paĂ­ses."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Do not transfer printers"
-msgstr "No transferir impresoras"
+msgid "Calendar"
+msgstr "Calendario"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
+"Restore Selected\n"
+"Catalog Entry"
msgstr ""
-"\n"
-"Marque las impresoras que desea transferir y haga clic \n"
-"sobre \"Transferir\"."
+"Restaurar entrada\n"
+"del CatĂĄlogo seleccionada"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
msgstr ""
-"\n"
-"Tampoco se pueden transferir las impresoras configuradas con los archivos "
-"PPD provistos por sus fabricantes o con controladores CUPS nativos."
+"Para utilizar impresora LPD remota, necesita proporcionar el nombre de host "
+"del servidor de impresiĂłn y el nombre de la impresora en ese servidor."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"AdemĂĄs, las colas no creadas con este programa o con \"foomatic-configure\" "
-"no se pueden transferir."
+msgid "Iceland"
+msgstr "Islandia"
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD y LPRng no soportan impresoras IPP.\n"
+msgid "consolehelper missing"
+msgstr "falta \"consolehelper\""
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ sĂłlo soporta impresoras locales, impresoras LPD remotas, e impresoras "
-"Socket/TCP.\n"
+msgid "stopped"
+msgstr "parado"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS no soporta impresoras en servidores Novell o impresoras que envĂ­an los "
-"datos en un comando formado libremente.\n"
+msgid "Whether the FPU has an irq vector"
+msgstr "Si la FPU tiene o no un vector de irq"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Puede copiar la configuraciĂłn de la impresora que ha realizado para la cola %"
-"s a %s, su cola corriente. Todos los datos de configuraciĂłn (nombre de la "
-"impresora, descripciĂłn, ubicaciĂłn, tipo de conexiĂłn, y opciones "
-"predeterminadas) se transfieren, pero los trabajos de impresiĂłn no se "
-"transfieren.\n"
-"Debido a las siguientes razones no todas las colas se pueden transferir:\n"
+msgid "Ext2"
+msgstr "Ext2"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-"Su impresora se configurĂł automĂĄticamente para darle acceso a las unidades "
-"de tarjetas de fotos desde su PC. Ahora puede acceder a sus tarjetas de "
-"fotos utilizando el programa grĂĄfico \"MtoolsFM\" (MenĂș: \"Aplicaciones\" -> "
-"\"Herramientas de Archivo\" -> \"Administrador de archivos MTools\") o los "
-"utilitarios \"mtools\" de lĂ­nea de comandos (teclee \"man mtools\" para mĂĄs "
-"informaciĂłn). EncontrarĂĄ el sistema de archivos de la tarjeta bajo la letra "
-"de unidad \"p:\", o letras de unidad subsiguientes cuando tiene mĂĄs de una "
-"impresora HP con unidades de tarjetas de fotos. En \"MtoolsFM\" puede "
-"cambiar entre las letras de unidad con el campo en la esquina superior "
-"derecha de la lista de archivos."
+msgid "Expand Tree"
+msgstr "Expandir el ĂĄrbol"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
+"The old \"%s\" driver is blacklisted.\n"
"\n"
-"Do not use \"scannerdrake\" for this device!"
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-"Su dispositivo multifunciĂłn se configurĂł automĂĄticamente para poder "
-"escanear. Ahora puede escanear con \"scanimage\" (\"scanimage -d hp:%s\" "
-"para especificar el escĂĄner si tiene mĂĄs de uno) desde la lĂ­nea de comandos "
-"o con las interfaces grĂĄficas \"xscanimage\" o \"xsane\". Si estĂĄ usando "
-"GIMP, tambiĂ©n puede escanear seleccionado la entrada apropiada del menĂș "
-"\"Archivo\"/\"Adquirir\". Ejecute también \"man scanimage\" en la línea de "
-"comandos para obtener mĂĄs informaciĂłn.\n"
+"El controlador antiguo \"%s\" estĂĄ en la lista negra.\n"
"\n"
-"ÂĄNo utilice \"scannerdrake\" para este dispositivo!"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printing test page(s)..."
-msgstr "Imprimir la(s) pĂĄgina(s) de prueba..."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Print option list"
-msgstr "Imprimir lista de opciones"
+"Ha sido reportado como problemĂĄtico para el nĂșcleo al descargarlo.\n"
+"\n"
+"El controlador nuevo \"%s\" sĂłlo se utilizarĂĄ en el prĂłximo arranque."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Imprimiendo en la impresora \"%s\""
+msgid "Expert Mode"
+msgstr "Modo experto"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Acceso de tarjetas de Impresora/Foto en \"%s\""
+msgid "Printer options"
+msgstr "Opciones de la impresora"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Imprimiendo/Escaneando en \"%s\""
+msgid "Local Network adress"
+msgstr "DirecciĂłn de red local"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Tarjetas de Impresora/Escaner/Foto en \"%s\""
+msgid "Backup your System files. (/etc directory)"
+msgstr "Respaldar sus archivos del sistema. (directorio /etc)"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
+"\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
"\n"
+"Do you want to install the updates ?"
msgstr ""
-"Para conocer las opciones disponibles para la impresora corriente lea la "
-"lista que se muestra debajo o haga clic sobre el botĂłn \"Imprimir lista de "
-"opciones\".%s%s%s\n"
+"Ahora tiene la oportunidad de bajar paquetes actualizados. Estos paquetes\n"
+"se han actualizad después de que se publicó la distribución. Puede que los\n"
+"mismos contengan correcciones de bugs o de seguridad.\n"
+"\n"
+"Para descargar estos paquetes, necesitarĂĄ tener una conexiĂłn con la\n"
+"Internet que esté funcionando.\n"
+"\n"
+"ÂżDesea instalar las actualizaciones?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Samba Server"
+msgstr "Servidor Samba"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg, alert=1)\n"
"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
+"Enable/Disable IP spoofing protection."
msgstr ""
+"Argumentos: (arg)\n"
"\n"
-" Los comandos \"%s\" y \"%s\" también permiten modificar las opciones de "
-"configuración para un trabajo de impresión particular. Simplemente añada las "
-"opciones deseadas a la lĂ­nea de comando, por ejemplo \"%s <archivo>\".\n"
+"Habilitar/deshabilitar protección contra engaño de IP."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"También puede utilizar el interfaz gråfico \"xpdq\" para configurar las "
-"opciones y manipular los trabajos de impresiĂłn.\n"
-"Si estĂĄ usando KDE como entorno de escritorio tiene un \"botĂłn de pĂĄnico\", "
-"un icono en su escritorio etiquetado como \"ÂĄDETENER impresora!\", que "
-"detiene todos los trabajos de impresiĂłn inmediatamente cuando hace clic en "
-"Ă©l. Esto es Ăștil, por ejemplo, para atascos de papel.\n"
+msgid "Australian Optus cable TV"
+msgstr "TelevisiĂłn por cable Australian Optus"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
msgstr ""
-"Este comando también se utiliza en el campo \"Comando de impresión\" de los "
-"diĂĄlogos de impresiĂłn de muchas aplicaciones. Pero aquĂ­ no se da el nombre "
-"del archivo porque el nombre del archivo a imprimir lo proporciona la "
-"aplicaciĂłn.\n"
+" <Tab>/<Alt-Tab> entre elementos | <espacio> selecciona | <F12> pantalla "
+"sig. "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Para imprimir un archivo desde la lĂ­nea de comando (ventana de terminal) use "
-"el comando \"%s <archivo>\" o \"%s <archivo>\".\n"
+msgid "Subnet:"
+msgstr "Subred:"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Para obtener una lista de las opciones disponibles para la impresora actual, "
-"haga clic en el botĂłn \"Imprimir lista de opciones\"."
+msgid "Zimbabwe"
+msgstr "Zimbaue"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"El comando \"%s\" también permite modificar las opciones de configuración "
-"para un trabajo de impresión determinado. Simplemente, añada las "
-"configuraciones deseadas a la lĂ­nea de comando, por ejemplo \"%s <archivo>"
-"\". "
+msgid "Please enter the host name or IP."
+msgstr "Por favor, ingrese el nombre o la IP del host"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Para imprimir un archivo desde la lĂ­nea de comando (ventana de terminal) use "
-"el comando \"%s <archivo>\".\n"
+msgid "When"
+msgstr "CuĂĄndo"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Second DNS Server (optional)"
+msgstr "Segundo servidor DNS (opcional)"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Finland"
+msgstr "Finlandia"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Here is a list of the available printing options for the current printer:\n"
+"Arguments: (arg)\n"
"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
msgstr ""
-"AquĂ­ tiene una lista de las opciones disponibles para la impresora actual:\n"
+"Argumentos: (arg)\n"
"\n"
+"Autorizar todos los servicios controlados por tcp_wrappers (ver hosts.deny"
+"(5)) si \\fIarg\\fP = ALL. SĂłlo los locales\n"
+"si \\fIarg\\fP = LOCAL y ninguno si \\fIarg\\fP = NONE. Para autorizar los "
+"servicios que necesita, use /etc/hosts.allow\n"
+"(ver hosts.allow(5))."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Estos comando también se utilizan en el campo \"Comando de impresión\" de "
-"los diĂĄlogos de impresiĂłn de muchas aplicaciones, pero aquĂ­ no se indica el "
-"nombre del archivo porque el archivo a imprimir lo proporciona la "
-"aplicaciĂłn.\n"
+msgid "Color depth: %s\n"
+msgstr "Profundidad de color: %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Para imprimir un archivo desde la lĂ­nea de comando (ventana de terminal) "
-"utilice el comando \"%s <archivo>\" o una herramienta de impresiĂłn grĂĄfica: "
-"\"xpp <archivo>\" o \"kprinter <archivo>\". Las herramientas grĂĄficas le "
-"permiten seleccionar la impresora y modificar las opciones de configuraciĂłn "
-"fĂĄcilmente.\n"
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "No puede desmarcar este paquete. Debe ser actualizado"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Did it work properly?"
-msgstr "ÂżFuncionĂł adecuadamente?"
+msgid "Loading from floppy"
+msgstr "Cargando desde un disquete"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
-"La(s) pĂĄgina(s) de prueba se enviaron al demonio de impresiĂłn.\n"
-"Puede que pase algo de tiempo antes de que comience la impresiĂłn.\n"
+"Drakperm se utiliza para ver archivos a utilizar para ajustar los permisos, "
+"dueños, y grupos por medio de msec.\n"
+"También puede editar sus reglas propias que sobre-escribirån las "
+"predeterminadas."
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"La(s) pĂĄgina(s) de prueba se enviaron a la impresora.\n"
-"Puede que pase algo de tiempo antes de que comience la impresiĂłn.\n"
-"Estado de la impresiĂłn:\n"
-"%s\n"
-"\n"
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do not print any test page"
-msgstr "No imprimir ninguna pĂĄgina de prueba"
+msgid "Slovenia"
+msgstr "Eslovenia"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Photo test page"
-msgstr "PĂĄgina de prueba de foto"
+msgid ""
+"Enter a user\n"
+"%s"
+msgstr ""
+"Introduzca un usuario\n"
+"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Alternative test page (A4)"
-msgstr "PĂĄgina de prueba alternativa (A4)"
+msgid ""
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
+msgstr ""
+"- Dispositivos PCI y USB : esto lista el fabricante, dispositivo, ids del "
+"subfabricante y del subdispositivo PCI/USB"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "PĂĄgina de prueba alternativa (Letter)"
+msgid "ProgressBar color selection"
+msgstr "selecciĂłn del color de la barra de progreso"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Standard test page"
-msgstr "PĂĄgina de prueba estĂĄndar"
+msgid ""
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
+msgstr ""
+"AquĂ­ estĂĄn las diferentes entradas.\n"
+"Puede añadir otras o cambiar las que ya existen."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Print"
-msgstr "Imprimir"
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "No test pages"
-msgstr "No hay pĂĄginas de prueba"
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
msgstr ""
-"Por favor, seleccione las pĂĄginas de prueba que quiere imprimir.\n"
-"Nota: la pĂĄgina de prueba de foto puede tardar mucho tiempo en ser impresa e "
-"incluso en impresoras lĂĄser con muy poca memoria puede que no salga. En la "
-"mayorĂ­a de los casos, basta con imprimir la pĂĄgina de prueba estĂĄndar."
+"Ejecuta los comandos programados por el comando at en el momento\n"
+"especificado al lanzar at, y ejecuta comandos por lotes (batch) cuando\n"
+"la carga promedio del sistema es suficientemente baja."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Test pages"
-msgstr "PĂĄginas de prueba"
+msgid "Radio support:"
+msgstr "Soporte para radio :"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"ÂżQuiere configurar esta impresora (\"%s\")\n"
-"como la impresora predeterminada?"
+msgid "Installing SANE packages..."
+msgstr "Instalando paquetes SANE..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Option %s out of range!"
-msgstr "ÂĄLa opciĂłn %s estĂĄ fuera de rango"
+msgid "boot disk creation"
+msgstr "Creado de disquetes que arrancan"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Option %s must be a number!"
-msgstr "ÂĄLa opciĂłn %s debe ser un nĂșmero!"
+msgid "LDAP"
+msgstr "LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "ÂĄLa opciĂłn %s debe ser un nĂșmero entero!"
+msgid "SILO"
+msgstr "SILO"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
#, c-format
-msgid "Printer default settings"
-msgstr "Configuraciones predeterminadas de la impresora"
+msgid "Change type"
+msgstr "Cambiar tipo"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "SILO Installation"
+msgstr "InstalaciĂłn de SILO"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use CD/DVDROM to backup"
+msgstr "Usar CD/DVDROM para la copia de respaldo"
+
+#: ../../install_messages.pm:1
#, c-format
msgid ""
-"Printer default settings\n"
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
-"Configuraciones predeterminadas de la impresora\n"
+"Felicidades, la instalaciĂłn estĂĄ completa.\n"
+"Extraiga el soporte de arranque y presione Intro para reiniciar.\n"
"\n"
-"Debería asegurarse que el tamaño de pågina y el tipo de tinta/modo de "
-"impresión (si corresponde) y también la configuración de hardware de las "
-"impresoras lĂĄser (memoria, unidad de dĂșplex, bandejas adicionales) estĂĄn "
-"configurados correctamente. Note que una calidad de impresiĂłn o resoluciĂłn "
-"extremadamente alta puede ser bastante lenta."
+"Para obtener informaciĂłn sobre correcciones disponibles para esta versiĂłn\n"
+"de Mandrake Linux, consulte el archivo de erratas disponible en\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Hay informaciĂłn disponible sobre cĂłmo configurar su sistema en el capĂ­tulo "
+"de\n"
+"configuraciĂłn tras la instalaciĂłn de la guĂ­a de usuario oficial de Mandrake "
+"Linux."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr "Transferencia de Firmware para HP LaserJet 1000"
+msgid "paranoid"
+msgstr "Paranoica"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Send mail report after each backup to:"
+msgstr "Enviar reporte por correo-e luego de cada respaldo a :"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+"This command you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications. But here do not supply the file name "
+"because the file to print is provided by the application.\n"
msgstr ""
-"Para poder imprimir con su impresora de inyecciĂłn de tinta Lexmark y esta "
-"configuraciĂłn, necesita los controladores de impresoras de inyecciĂłn de "
-"tinta proporcionados por Lexmark (http://www.lexmark.com/). Haga clic en el "
-"vĂ­nculo \"Drivers\". Luego, seleccione su modelo y posteriormente \"Linux\" "
-"como sistema operativo. Los controladores vienen vienen como paquetes RPM o "
-"como scripts del shell con instalaciĂłn grĂĄfica interactiva. No necesita "
-"hacer esta configuraciĂłn con las interfaces grĂĄficas. Cancele directamente "
-"tras el acuerdo de licencia. Luego imprima las pĂĄginas de alineaciĂłn del "
-"cabezal de impresiĂłn con \"lexmarkmaintain\" y ajuste la configuraciĂłn de la "
-"alineaciĂłn de la cabeza con este programa."
+"Este comando también se utiliza en el campo \"Comando de impresión\" de los "
+"diĂĄlogos de impresiĂłn de muchas aplicaciones. Pero aquĂ­ no se da el nombre "
+"del archivo porque el nombre del archivo a imprimir lo proporciona la "
+"aplicaciĂłn.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "ConfiguraciĂłn de impresora de inyecciĂłn de tinta Lexmark"
+msgid "Resolution"
+msgstr "ResoluciĂłn"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
msgstr ""
-"Los controladores de impresiĂłn de inkjet que proporciona Lexmark sĂłlo "
-"admiten impresoras locales, no impresoras en mĂĄquinas remotas o servidores "
-"de impresiĂłn. Por favor, conecte su impresora a un puerto local o "
-"configĂșrelo en la mĂĄquina a la que estĂĄ conectada."
+"Para imprimir en una impresora SMB, necesita proporcionar el nombre del "
+"servidor SMB (ÂĄNote que puede ser diferente al nombre de hostTCP/IP del "
+"mismo!) y posiblemente la direcciĂłn IP del servidor de impresiĂłn, asĂ­ como "
+"el nombre del recurso compartido para la impresora que se quiere usar y "
+"cualquier otra información del nombre de usuario, contraseña y grupo de "
+"trabajo que haga falta."
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse icmp echo."
msgstr ""
-"Va a configurar una impresora laser de windows OKI. Estas impresoras\n"
-"utilizan un protocolo de comunicaciĂłn muy especial y sĂłlo funcionan cuando "
-"se conectan al primer puerto paralelo. Cuando su impresora estĂĄ conectada a "
-"otro puerto o a un servidor de impresión, por favor conéctela al primer "
-"puerto paralelo antes de imprimir una pĂĄgina de prueba. De no ser asĂ­, la "
-"impresora no funcionarĂĄ. El controlador ignorarĂĄ la configuraciĂłn del tipo "
-"de conexiĂłn."
+"Argumentos: (arg)\n"
+"\n"
+"Aceptar/Rechazar eco ICMP."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "OKI winprinter configuration"
-msgstr "ConfiguraciĂłn de impresora de windows OKI"
+msgid "reconfigure"
+msgstr "reconfigurar"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
-"Si no se lista su impresora, elija una compatible (vea el manual de la "
-"misma) o una simliar."
+"Su tarjeta puede admitir aceleraciĂłn 3D por hardware con XFree %s,\n"
+"ADVIERTA QUE ESTO ES EXPERIMENTAL Y PUEDE COLGAR SU ORDENADOR."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
-"\n"
-"\n"
-"Por favor, verifique que Printerdrake hizo correctamente la detecciĂłn "
-"automĂĄtica del modelo de su impresora. Busque el modelo correcto en la lista "
-"si estĂĄ resaltado un modelo equivocado o \"Impresora en crudo\"."
+msgid "Xinetd Service"
+msgstr "Servicio Xinetd"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which printer model do you have?"
-msgstr "¿Qué modelo de impresora tiene?"
+msgid "access to network tools"
+msgstr "acceso a herramientas de red"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer model selection"
-msgstr "SelecciĂłn del modelo de impresora"
+msgid "Firmware-Upload for HP LaserJet 1000"
+msgstr "Transferencia de Firmware para HP LaserJet 1000"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Reading printer database..."
-msgstr "Leyendo base de datos de impresoras ..."
+msgid ""
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
+msgstr ""
+"Mandrake Linux 9.1 le permite utilizar el Ășltimo software para reproducir "
+"archivos de audio, editar y organizar sus imĂĄgenes o fotos, y reproduzcir "
+"vĂ­deos"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select model manually"
-msgstr "Seleccionar el modelo manualmente"
+msgid "Here is a list of all auto-detected printers. "
+msgstr "AquĂ­ estĂĄ la lista de todas las impresoras detectadas automĂĄticamente."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The model is correct"
-msgstr "El modelo es correcto"
+msgid ""
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
+msgstr ""
+"OcurriĂł un error al instalar aboot, \n"
+"Âżdesea forzar la instalaciĂłn incluso si ello implicara la destrucciĂłn de la "
+"primera particiĂłn?"
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
+"Options Description:\n"
"\n"
-"For your printer Printerdrake has found:\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
-"%s"
msgstr ""
-"Printerdrake ha comparado el modelo que resultĂł de la detecciĂłn automĂĄtica "
-"con los modelos listados en su base de datos de impresoras para encontrar la "
-"mejor coincidencia. Esta elecciĂłn puede estar equivocada, especialmente si "
-"su impresora no estĂĄ listada en absoluto en la base de datos. Entonces, "
-"verifique si la elecciĂłn es correcta y haga clic en \"El modelo es correcto"
-"\" , caso contrario, haga clic en \"Seleccionar el modelo manualmente\" de "
-"forma tal que pueda elegir el modelo de su impresora manualmente en la "
-"pantalla siguiente.\n"
+"descripciĂłn de las opciones:\n"
"\n"
-"Para su impresora Printerdrake ha encontrado:\n"
+" En este paso Drakbackup le permite cambiar:\n"
+"\n"
+" - El modo de compresiĂłn:\n"
+" \n"
+" Si marca compresiĂłn bzip2, comprimirĂĄ mejor sus datos\n"
+" que gzip (alrededor del 2-10 %%).\n"
+" Por defecto, esta opciĂłn no estĂĄ marcada dado que este\n"
+" modo de compresiĂłn necesita mĂĄs tiempo (100 veces mĂĄs)\n"
+" \n"
+" - El modo de actualizaciĂłn:\n"
+"\n"
+" Esta opciĂłn actualizarĂĄ su respaldo, pero no es\n"
+" realmente Ăștil ya que necesita descomprimirlo\n"
+" antes que pueda actualizarlo.\n"
+" \n"
+" - el modo .backupignore:\n"
+"\n"
+" Al igual que cvs, Drakbackup ignorarĂĄ todas las referencias\n"
+" incluĂ­das en los archivos .backupignore de cada directorio.\n"
+" ej: \n"
+" /*> cat .backupignore*/\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
-"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Your printer model"
-msgstr "El modelo de su impresora"
+msgid ""
+"Restore Selected\n"
+"Files"
+msgstr ""
+"Restaurar los archivos\n"
+"seleccionados"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Preparing printer database..."
-msgstr "Preparando base de datos de impresoras ..."
+msgid ""
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
+msgstr ""
+"%s existe, Âżborrarlo?\n"
+"\n"
+"Advertencia: Si ya realizĂł este proceso probablemente deba\n"
+" purgar la entrada de authorized_keys en el servidor."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Location"
-msgstr "UbicaciĂłn"
+msgid "Please fill or check the field below"
+msgstr "Por favor, complete o verifique el campo de abajo"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Description"
-msgstr "DescripciĂłn"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "ÂżDesea guardar las modificaciones en /etc/fstab?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Name of printer"
-msgstr "Nombre de la impresora"
+msgid "Boot Protocol"
+msgstr "Protocolo de arranque"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Cada impresora necesita un nombre (por ejemplo, \"impresora\"). No tiene por "
-"qué rellenar los campos Descripción ni Ubicación. Son comentarios para los "
-"usuarios."
+msgid "LVM-disks %s\n"
+msgstr "Discos-LVM %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr "Ingrese nombre de la impresora y comentarios"
+msgid "The package %s is needed. Install it?"
+msgstr "Se necesita el paquete %s. ÂżDesea instalarlo?"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr "Haciendo que el puerto de la impresora esté disponible para CUPS..."
+msgid "On boot"
+msgstr "Al iniciar"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Checking device and configuring HPOJ..."
-msgstr "Verificando dispositivo y configurando HPOJ..."
+msgid "Bus identification"
+msgstr "IdentificaciĂłn del bus"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr ""
-"Acceso a la tarjeta de memoria de fotos en su dispositivo multifunciĂłn HP"
+msgid "Please make a backup of your data first"
+msgstr "Por favor, haga primero una copia de seguridad de sus datos"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr "Escaneo en su dispositivo multifunciĂłn HP"
+msgid "Vatican"
+msgstr "Vaticano"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Installing mtools packages..."
-msgstr "Instalando paquetes mtools..."
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr "Tiene mĂĄs de un disco rĂ­gido, Âżsobre cuĂĄl desea instalar Linux?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Installing SANE packages..."
-msgstr "Instalando paquetes SANE..."
+msgid "Boot ISO"
+msgstr "ISO de arranque"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installing HPOJ package..."
-msgstr "Instalando paquete HPOJ..."
+msgid "Eritrea"
+msgstr "Eritrea"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
-"ÂżSu impresora es un dispositivo multifunciĂłn de HP o Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 con scanner, Sony IJP-V100), una HP "
-"PhotoSmart o una HP LaserJet 2200?"
+msgid "Remove List"
+msgstr "Quitar lista"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
-msgid "A command line must be entered!"
-msgstr "ÂĄDebe ingresar un comando!"
+msgid "A customizable environment"
+msgstr "Un entorno personalizable"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Command line"
-msgstr "LĂ­nea de comandos"
+msgid "Inuktitut"
+msgstr "Inuktitut"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
-"AquĂ­ puede especificar una lĂ­nea de comandos arbitraria en la cual deberĂ­a "
-"ponerse el trabajo de impresiĂłn en vez de enviarse directamente a la "
-"impresora."
+msgid "Morocco"
+msgstr "Marruecos"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pipe into command"
-msgstr "Enviar el trabajo a un comando"
+msgid "Which printer model do you have?"
+msgstr "¿Qué modelo de impresora tiene?"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detected model: %s %s"
-msgstr "Modelo detectado: %s %s"
+msgid "Add a new printer"
+msgstr "Añadir una impresora nueva"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A valid URI must be entered!"
-msgstr "ÂĄDebe introducir un URI vĂĄlido!"
+msgid " All of your selected data have been "
+msgstr " Todos los datos seleccionados han sido "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Printer Device URI"
-msgstr "URI del dispositivo de impresiĂłn"
+msgid "<-- Delete"
+msgstr "<-- Borrar"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Puede especificar directamente el URI para acceder a la impresora. El URI "
-"debe cumplir con las especificaciones Foomatic o CUPS. Recuerde que no todos "
-"los sistemas de impresiĂłn admiten URIs."
+msgid "Nepal"
+msgstr "Nepal"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Port"
-msgstr "Puerto"
+msgid "cpu # "
+msgstr "cpu #"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printer host name or IP"
-msgstr "Nombre de host o IP de la impresora"
+msgid "chunk size"
+msgstr "tamaño de los bloques"
-#: ../../printer/printerdrake.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "The port number should be an integer!"
-msgstr "ÂĄEl nĂșmero de puerto debe ser un nĂșmero entero!"
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "los comandos antes de iniciar, o pulse 'c' para una linea de comandos."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "ÂĄFalta el nombre de host o la IP de la impresora!"
+msgid "Problems installing package %s"
+msgstr "Problemas al instalar el paquete %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"Para imprimir en una impresora por socket o TCP, necesita proporcionar el "
-"nombre de host o direcciĂłn IP de la impresora y, opcionalmente, el nĂșmero de "
-"puerto (9100, por defecto). En servidores HP JetDirect el nĂșmero de puerto "
-"por lo general es 9100, en otros servidores puede variar. Consulte el manual "
-"de su hardware."
+msgid "You will receive an alert if the load is higher than this value"
+msgstr "RecibirĂĄ una alerta si la carga es mayor que este valor"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
msgstr ""
-"Elija una de las impresoras detectadas automĂĄticamente de la lista o ingrese "
-"el nombre del host o la IP y el nĂșmero de puerto opcional (9100, por "
-"defecto) en los campos."
+"\n"
+"\n"
+"Para enviar un reporte de errores, haga clic sobre el botĂłn Reporte.\n"
+"Esto abrirĂĄ una ventana del navegador web en https://drakbug.mandrakesoft."
+"com\n"
+"donde encontrarĂĄ un formulario para completar. La informaciĂłn que se\n"
+"muestra arriba serĂĄ transferida a ese servidor\n"
+"\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "Opciones de la impresora por socket/TCP"
+msgid "Add a scanner manually"
+msgstr "Añadir un escåner manualmente"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Host \"%s\", port %s"
-msgstr "Host \"%s\", puerto %s"
+msgid "Reload partition table"
+msgstr "Volver a cargar la tabla de particiones"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", host \"%s\", puerto %s"
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr "SĂ­, deseo entrada automĂĄtica con este (usuario, escritorio)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Scanning network..."
-msgstr "Buscando en la red ..."
+msgid "Search for fonts in installed list"
+msgstr "Buscar tipografĂ­as en la lista de instaladas"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Printer auto-detection"
-msgstr "DetecciĂłn automĂĄtica de impresoras"
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr "La red local no finalizĂł con `.0', saliendo."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "NCP queue name missing!"
-msgstr "ÂĄNo se encuentra la cola del servidor NCP!"
+msgid "Boot"
+msgstr "Arranque"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "NCP server name missing!"
-msgstr "ÂĄNo se encuentra el nombre del servidor NCP!"
+msgid "Tuner type:"
+msgstr "Tipo de sintonizador :"
-#: ../../printer/printerdrake.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Print Queue Name"
-msgstr "Nombre de la cola de impresiĂłn"
+msgid ""
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
+msgstr ""
+"Ahora es el momento de seleccionar un sistema de impresiĂłn para su\n"
+"computadora. Otros sistemas operativos pueden ofrecerle uno, pero Mandrake\n"
+"Linux le ofrece dos. Cada uno de los sistemas de impresiĂłn es mejor para un\n"
+"tipo de configuraciĂłn particular.\n"
+"\n"
+" * \"%s\" - \"print, don't queue\" (imprimir sin poner en cola) es la\n"
+"elecciĂłn si Usted tiene una conexiĂłn directa a su impresora y desea evitar\n"
+"el pĂĄnico de los papeles trabados, y no tiene impresora en red alguna\n"
+"(\"%s\" manejarĂĄ sĂłlo casos de red muy simples y es algo lento cuando se\n"
+"utiliza con las redes) Se recomienda utilizar \"pdq\" si esta es su primer\n"
+"experiencia con GNU/Linux.\n"
+"\n"
+" * \"%s\" - \"Common Unix Printing System\" (Sistema de ImpresiĂłn ComĂșn de\n"
+"Unix) es una elecciĂłn excelente para imprimir en su impresora local o en\n"
+"una en la otra punta del planeta. Es simple de configurar y puede actuar\n"
+"como servidor o cliente para el sistema de impresiĂłn antiguo \"lpd\", por\n"
+"lo que es compatible con sistemas operativos mĂĄs antiguos que todavĂ­a\n"
+"pueden necesitar servicios de impresiĂłn. Si bien es bastante potente, la\n"
+"configuraciĂłn bĂĄsica es tan simple como la de \"pdq\". Si necesita que\n"
+"emule a un servidor \"lpd\", debe activar el demonio \"cups-lpd\". \"%s\"\n"
+"incluye interfaces grĂĄficas para imprimir o elegir las opciones de la\n"
+"impresora y para administrar la impresora.\n"
+"\n"
+"Si hace una elecciĂłn ahora y mĂĄs tarde encuentra que a Usted no le gusta su\n"
+"sistema de impresiĂłn, puede cambiarlo ejecutando PrinterDrake desde el\n"
+"Centro de Control de Mandrake y haciendo clic sobre el botĂłn para expertos."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Printer Server"
-msgstr "Servidor de impresiĂłn"
+msgid "\"Menu\" key"
+msgstr "La tecla \"MenĂș\""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
msgstr ""
-"Para imprimir en una impresora NetWare, es necesario escribir el nombre del "
-"servidor de impresiĂłn NetWare (ÂĄNote que puede no ser el mismo que el nombre "
-"de la mĂĄquina en TCP/IP) asĂ­ como el nombre de la cola de impresiĂłn que "
-"desea usar y el nombre de usuario y la contraseña apropiados."
+"\n"
+"\n"
+"Por favor, verifique que Printerdrake hizo correctamente la detecciĂłn "
+"automĂĄtica del modelo de su impresora. Busque el modelo correcto en la lista "
+"si estĂĄ resaltado un modelo equivocado o \"Impresora en crudo\"."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "NetWare Printer Options"
-msgstr "Opciones de la impresora NetWare"
+msgid "Security Administrator:"
+msgstr "Administrador de seguridad:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please enter your login"
+msgstr "Por favor, ingrese su nombre de usuario (login)"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check permissions of files in the users' home."
+msgstr ""
+"si se pone en sĂ­, verificar permisos de archivos en dirs. personales de "
+"usuarios."
+
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
msgstr ""
-"Conecte su impresora a un servidor Linux y permita que su(s) mĂĄquina(s) "
-"Windows se conecten al mismo como un cliente.\n"
-"\n"
-"ÂżRealmente desea continuar configurando esta impresora como lo estĂĄ haciendo?"
+"No tiene ninguna conexiĂłn a Internet.\n"
+"Primero debe crear una haciendo clic sobre 'Configurar'"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Fonts copy"
+msgstr "Copiar tipografĂ­as"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Automated"
+msgstr "Automatizada"
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Do you want to test the configuration?"
+msgstr "ÂżDesea probar la configuraciĂłn?"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
msgstr ""
-"Configure a su servidor Windows para que la impresión esté disponible bajo "
-"el protocolo IPP y configure la impresiĂłn desde esta mĂĄquina bajo el tipo de "
-"conexiĂłn \"%s\" en PrinterDrake.\n"
-"\n"
+"La impresora \"%s\" se quitĂł satisfactoriamnete de Star Office/OpenOffice."
+"org."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+" to the Internet as a client.\n"
"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
+"High: There are already some restrictions, and more automatic checks "
+"are run every night.\n"
"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
+"Higher: The security is now high enough to use the system as a server "
+"which can accept\n"
+" connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+" should choose a lower level.\n"
"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
+"Paranoid: This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+" features are at their maximum\n"
"\n"
+"Security Administrator:\n"
+" If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+" email)"
msgstr ""
-"Estå a punto de configurar la impresión a una cuenta Windows con contraseña. "
-"Debido a una falla en la arquitectura del cliente Samba la contraseña se "
-"pone como texto plano en la lĂ­nea de comandos del cliente Samba que se usa "
-"para transmitir el trabajo de impresiĂłn al servidor Windows. Por lo tanto, "
-"es posible que cada usuario de esta mĂĄquina vea la clave en pantalla "
-"ejecutando \"ps auxwww\".\n"
+"EstĂĄndar: Este es el nivel estĂĄndar recomendado para una computadora que se "
+"utilizarĂĄ para conectarse\n"
+"a la Internet como cliente.\n"
"\n"
-"Recomendamos utilizar alguna de las alternativas siguientes (en todos los "
-"casos tiene que asegurarse que sĂłlo las mĂĄquinas de su red local tienen "
-"acceso al servidor Windows, por ejemplo utilizando un cortafuegos):\n"
+"Alta: Ya hay algunas restricciones, y mĂĄs verificaciones automĂĄticas se "
+"corren cada noche.\n"
"\n"
-"Usar una cuenta sin contraseña en su servidor Windows, por ej. la cuenta "
-"\"GUEST\" o una cuenta especial dedicada a la impresiĂłn. No quite la "
-"protección con contraseña de una cuenta personal o de la cuenta del "
-"administrador.\n"
+"MĂĄs alta: La seguridad ahora es lo suficientemente alta para utilizar el "
+"sistema como un servidor que\n"
+"puede aceptar conexiones de muchos clientes. Si su mĂĄquina sĂłlo es un "
+"cliente de la Internet,\n"
+"deberĂ­a elegir un nivel mĂĄs bajo.\n"
"\n"
-"Configure a su servidor Windows para que la impresión esté disponible bajo "
-"el protocolo LPD y configure la impresiĂłn desde esta mĂĄquina bajo el tipo de "
-"conexiĂłn \"%s\" en PrinterDrake.\n"
+"Paranoico: Este es similar al nivel anterior, pero el sistema estĂĄ cerrado "
+"por completo y las\n"
+"caracterĂ­sticas de seguridad estĂĄn al mĂĄximo.\n"
"\n"
+"Administrador de seguridad: Si se activa la opciĂłn 'Alertas de seguridad', "
+"se enviarĂĄn las alertas\n"
+"de seguridad a este usuario (nombre o correo-e)"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "SECURITY WARNING!"
-msgstr "ÂĄADVERTENCIA DE SEGURIDAD!"
+msgid "Save packages selection"
+msgstr "Guardar la selecciĂłn de paquetes"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Samba share name missing!"
-msgstr "ÂĄNo se encuentra el nombre del recurso compartido de Samba!"
+msgid "Remove the last item"
+msgstr "Borrar el Ășltimo elemento"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "ÂĄDebe indicar el nombre o la direcciĂłn IP del servidor!"
+msgid "User list to restore (only the most recent date per user is important)"
+msgstr ""
+"Lista de usuarios a restaurar (sĂłlo importa la fecha mĂĄs reciente por "
+"usuario)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detected"
-msgstr "Detectada automĂĄticamente"
+msgid "No net boot images created!"
+msgstr "ÂĄNo se crearon imĂĄgenes de arranque por red!"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Workgroup"
-msgstr "Grupo de trabajo"
+msgid "use pptp"
+msgstr "usar pptp"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Share name"
-msgstr "Nombre del recurso compartido"
+msgid "Choose which services should be automatically started at boot time"
+msgstr "Seleccione qué servicios se deben iniciar automåticamente al arrancar"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SMB server IP"
-msgstr "IP del servidor SMB"
+msgid "Learn how to use this printer"
+msgstr "Aprender como usar esta impresora"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SMB server host"
-msgstr "MĂĄquina del servidor SMB"
+msgid "Configure the network now"
+msgstr "Configurar la red ahora"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
-"Si se detectĂł automĂĄticamente la impresora deseada, simplemente elĂ­jala de "
-"la lista y luego agregue el nombre de usuario, contraseña, y/o grupo de "
-"trabajo si es necesario."
+msgid "Choose a mirror from which to get the packages"
+msgstr "Elija un sitio de réplica del cual obtener los paquetes"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
msgstr ""
-"Para imprimir en una impresora SMB, necesita proporcionar el nombre del "
-"servidor SMB (ÂĄNote que puede ser diferente al nombre de hostTCP/IP del "
-"mismo!) y posiblemente la direcciĂłn IP del servidor de impresiĂłn, asĂ­ como "
-"el nombre del recurso compartido para la impresora que se quiere usar y "
-"cualquier otra información del nombre de usuario, contraseña y grupo de "
-"trabajo que haga falta."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opciones de la impresora SMB (Windows 9x/NT)"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Impresora \"%s\" en el servidor \"%s\""
+"El redimensionador de tamaño de la FAT no puede gestionar su partición, \n"
+"ocurriĂł el error siguiente: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", impresora \"%s\" en el servidor \"%s\""
+msgid "Which sector do you want to move it to?"
+msgstr "¿A qué sector desea desplazarla?"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Remote printer name missing!"
-msgstr "ÂĄFalta el nombre de la impresora remota!"
+msgid "Do you want to click on this button?"
+msgstr "ÂżDesea pulsar este botĂłn?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remote host name missing!"
-msgstr "ÂĄFalta el nombre del host remoto!"
+msgid "Bahamas"
+msgstr "Bahamas"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote printer name"
-msgstr "Nombre de la impresora remota"
+msgid "Manual configuration"
+msgstr "ConfiguraciĂłn manual"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Remote host name"
-msgstr "Nombre de host del servidor remoto"
+msgid "search"
+msgstr "buscar"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
msgstr ""
-"Para utilizar impresora LPD remota, necesita proporcionar el nombre de host "
-"del servidor de impresiĂłn y el nombre de la impresora en ese servidor."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Opciones de la impresora remota lpd"
+"Este paquete carga la definiciĂłn de teclado que se indica en\n"
+"/etc/sysconfig/keyboard. Puede ser configurado con el programa kbdconfig.\n"
+"Debe dejarse activo en la mayorĂ­a de las mĂĄquinas."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Manual configuration"
-msgstr "ConfiguraciĂłn manual"
+msgid "Xpmac (installation display driver)"
+msgstr "Xpmac (instalaciĂłn del controlador de la pantalla)"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "ÂĄDebe elegir/ingresar una impresora o un dispositivo!"
+msgid "Zeroconf host name must not contain a ."
+msgstr "El nombre de la mĂĄquina Zeroconf no debe contener un ."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
msgstr ""
-"(Puertos paralelo: /dev/lp0, /dev/lp1, ..., equivalen a LPT1:, LPT2, ..., "
-"1er impresora USB: /dev/usb/lp0, 2da impresora USB: /dev/usb/lp1, ...) "
+"Syslog es el servicio a través del que varios demonios van a enviar\n"
+"sus mensajes de registro, que syslog va a redirigir a varios archivos\n"
+"de registro(log). Es una buena idea ejecutar siempre syslog."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Por favor, elija el puerto al que estĂĄ conectado su impresora."
+msgid "Unknown/Others"
+msgstr "Desconocido/Otros"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Por favor, elija el puerto donde estĂĄ conectada su impresora o ingrese el "
-"nombre de un dispositivo o archivo en la lĂ­nea de entrada"
+msgid "No TV Card detected!"
+msgstr "ÂĄNo se detectĂł tarjeta de TV!"
+
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Options"
+msgstr "Opciones"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr ""
-"Por favor, elija la impresora a la cual deberĂ­an ir los trabajos de "
-"impresiĂłn."
+msgid "The printer \"%s\" is set as the default printer now."
+msgstr "La impresora \"%s\" ahora es la impresora predeterminada."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
msgstr ""
-"Por favor seleccione la impresora que desea configurar. La configuraciĂłn de "
-"la impresora se harĂĄ de forma totalmente automatizada. Si su impresora no se "
-"detectĂł correctamente o si prefiere una configuraciĂłn personalizada, active "
-"la \"ConfiguraciĂłn manual\"."
+"Va a configurar una impresora laser de windows OKI. Estas impresoras\n"
+"utilizan un protocolo de comunicaciĂłn muy especial y sĂłlo funcionan cuando "
+"se conectan al primer puerto paralelo. Cuando su impresora estĂĄ conectada a "
+"otro puerto o a un servidor de impresión, por favor conéctela al primer "
+"puerto paralelo antes de imprimir una pĂĄgina de prueba. De no ser asĂ­, la "
+"impresora no funcionarĂĄ. El controlador ignorarĂĄ la configuraciĂłn del tipo "
+"de conexiĂłn."
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr "AquĂ­ estĂĄ la lista de todas las impresoras detectadas automĂĄticamente."
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgstr "GeneraciĂłn de la CPU (ej: 8 para PentiumIII, ...)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr "En este momento no hay alternativa posible"
+msgid "Auto-detected"
+msgstr "Detectada automĂĄticamente"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-"La configuraciĂłn de la impresora se harĂĄ de forma totalmente automatizada. "
-"Si su impresora no se detectĂł correctamente o si prefiere una configuraciĂłn "
-"personalizada, active la \"ConfiguraciĂłn manual\"."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "The following printer was auto-detected. "
-msgstr "Se detectĂł automĂĄticamente la impresora siguientes. "
+"EstĂĄ a punto de configurar su computadora para instalar un servidor PXE como "
+"servidor DHCP\n"
+"y un servidor TFTP para construir un servidor de instalaciĂłn.\n"
+"Con esa caracterĂ­stica, otras computadoras en su red local se podrĂĄn "
+"instalar utilizando esta computadora como fuente.\n"
+"\n"
+"Debe asegurarse que ha configurado su acceso a la Red/Internet utilizando "
+"drakconnect antes de proceder.\n"
+"\n"
+"Nota: necesita un adaptador de red dedicado para configurar una red de ĂĄrea "
+"local (LAN)."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
-"Por favor, elija la impresora a la cual deberĂ­an ir los trabajos o ingrese "
-"el nombre de un dispositivo o archivo en la lĂ­nea de entrada"
+"ÂĄNo hay 1MB de espacio para bootstrap! La instalaciĂłn continuarĂĄ, pero para "
+"arrancar su sistema, necesitarĂĄ crear la particiĂłn bootstrap en DiskDrake"
#: ../../printer/printerdrake.pm:1
#, c-format
@@ -12459,1109 +12339,788 @@ msgstr ""
"Por favor, elija la impresora que desea configurar o ingrese el nombre de un "
"dispositivo o archivo en la lĂ­nea de entrada"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr ""
-"Alternativamente, puede especificar el nombre de un dispositivo o archivo en "
-"la lĂ­nea de entrada"
+msgid "Refuse"
+msgstr "Rechazar"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "HFS"
+msgstr "HFS"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
msgstr ""
-"Si no es una de las que desea configurar, introduzca un nombre de "
-"dispositivo o archivo en la lĂ­nea de entrada"
+"HardDrake lanza una prueba del hardware, y opcionalmente configura\n"
+"el hardware nuevo/cambiado."
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, c-format
-msgid "Available printers"
-msgstr "Impresoras disponibles"
+msgid "Remote Printers"
+msgstr "Impresoras remotas"
-#: ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "No printer found!"
-msgstr "ÂĄNo se encontrĂł impresora alguna!"
+msgid "Creating and formatting file %s"
+msgstr "Creando y formateando el archivo %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "You must enter a device or file name!"
-msgstr "Debe introducir un dispositivo un un nombre de archivo"
+msgid "if set to yes, check additions/removals of sgid files."
+msgstr "si se pone en sĂ­, verificar adiciones/remociones de archivos sgid."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
-"No se encontrĂł ninguna impresora local. Para instalar una manualmente, "
-"introduzca un nombre de dispositivo/nombre de archivo en la lĂ­nea de entrada "
-"(Puertos paralelos: /dev/lp0, /dev/lp1, ..., equivalen a LPT1:, LPT2, ..., "
-"1ÂȘ impresora USB: /dev/usb/lp0, 2ÂȘ impresora USB: /dev/usb/lp1, ...)."
+"La HP LaserJet 1000 necesita que se transfiera su firmware luego de "
+"encenderla. Descargue el paquete de controladores Windows desde el sitio web "
+"de HP (el firmware del CD de la impresora no funciona) y extraiga el archivo "
+"del firmware descomprimiendo el archivo auto-extraĂ­ble .exe con el "
+"utilitario unzip y busque el archivo sihp1000.img. Copie este archivo en el "
+"directorio /etc/printer. AllĂ­ el lo encontrarĂĄ automĂĄticamente el script que "
+"lo transfiere y lo transferirĂĄ cada vez que se conecte y encienda la "
+"impresora.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Local Printer"
-msgstr "Impresora local"
+msgid "Choose an existing LVM to add to"
+msgstr "Elegir un LVM existente al que añadir"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "USB printer \\#%s"
-msgstr "Impresora USB \\#%s"
+msgid "xfs restart"
+msgstr "Reiniciar XFS"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "Impresora en puerto paralelo \\#%s"
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
+"La impresora \"%s\" ya existe,\n"
+"Âżrealmente desea sobre-escribir la configuraciĂłn de la misma?"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Impresora \"%s\" en el servidor SMB/Windows \"%s\""
+msgid "No partition available"
+msgstr "no hay particiones disponibles"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Impresora de red \"%s\", puerto %s"
+msgid "Use the scanners on hosts: "
+msgstr "Usar los escĂĄneres en los hosts:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Detected %s"
-msgstr "Detectada %s"
+msgid "Unselected All"
+msgstr "Deseleccionar todas."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ", impresora \"%s\" en el servidor SMB/Windows \"%s\""
+msgid "Domain Name Resolver"
+msgstr "Nombres de dominio"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", impresora de red \"%s\", puerto %s"
+msgid "Encryption key (again)"
+msgstr "Clave de cifrado (otra vez)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Enhorabuena, su impresora estĂĄ instalada y configurada.\n"
-"\n"
-"Puede imprimir usando el comando \"Imprimir\" de su aplicaciĂłn (normalmente "
-"se encuentra en el menĂș \"Archivo\").\n"
-"\n"
-"Si quiere añadir, borrar o renombrar una impresora, o si quiere cambiar las "
-"opciones de configuraciĂłn por defecto (bandeja de entrada de papel, calidad "
-"de impresiĂłn, ...), seleccione \"Impresora\" en la secciĂłn de \"Hardware\" "
-"del Centro de control de Mandrake."
+msgid "Samba share name missing!"
+msgstr "ÂĄNo se encuentra el nombre del recurso compartido de Samba!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr ""
-"Detectar automĂĄticamente las impersoras conectadas a mĂĄquinas que corren "
-"Microsoft Windows"
+msgid "True Type install done"
+msgstr "InstalaciĂłn de True Type realizada"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr ""
-"Detectar automĂĄticamente las impresoras conectadas directamente a la red "
-"local"
+msgid "Detection in progress"
+msgstr "DetecciĂłn en progreso"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Detectar automĂĄticamente las impresoras conectadas a esta mĂĄquina"
+msgid "Build Whole Kernel -->"
+msgstr "Construir el nĂșcleo completo -->"
+
+#: ../../install_steps.pm:1
+#, c-format
+msgid "Welcome to %s"
+msgstr "Bienvenido a %s"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "Por favor, inserte el disquete de mĂłdulos actualizados en la unidad %s"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Bootsplash"
+msgstr "Bootsplash"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"The following printer\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"%s%s\n"
+"is directly connected to your system"
msgstr ""
+"La siguiente impresora\n"
"\n"
-"Bienvenido al Asistente de configuraciĂłn de Impresoras\n"
-"\n"
-"Este asistente lo ayudarĂĄ a instalar sus impresoras conectadas a esta "
-"computadora.\n"
-"\n"
-"Si tiene impresoras conectadas a esta måquina, por favor enciéndalas para "
-"que se puedan detectar automĂĄticamnte.\n"
-"\n"
-"Haga clic sobre \"Siguiente\" cuando esté listo, o sobre \"Cancelar\" si "
-"Usted no desea configurar sus impresoras ahora."
+"%s%s\n"
+"estĂĄ conectada directamente a su sistema"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Bienvenido al Asistente de configuraciĂłn de Impresoras\n"
-"\n"
-"Este asistente lo ayudarĂĄ a instalar sus impresoras conectadas a esta "
-"computadora o conectadas directamente a la red.\n"
-"\n"
-"Si tiene impresoras conectadas a esta måquina, por favor enciéndalas para "
-"que se puedan detectar automåticamnte. También deberían estar conectadas y "
-"encendidas sus impresoras de red.\n"
-"\n"
-"Note que la detecciĂłn automĂĄtica de las impresoras de red toma mĂĄs tiempo "
-"que sĂłlo la detecciĂłn automĂĄtica de las impresoras conectadas a esta "
-"mĂĄquina. Entonces, desactive la detecciĂłn automĂĄtica de las impresoras de "
-"red si no lo necesita.\n"
-"\n"
-"Haga clic sobre \"Siguiente\" cuando esté listo, o sobre \"Cancelar\" si "
-"Usted no desea configurar sus impresoras ahora."
+msgid "Printer sharing on hosts/networks: "
+msgstr "Compartir impresoras en hosts/redes: "
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
"\n"
-"Bienvenido al Asistente de configuraciĂłn de la impresora\n"
-"\n"
-"Este asistente lo ayudarĂĄ a instalar sus impresoras conectadas a esta "
-"computadora, conectadas directamente a la red o a una mĂĄquina Windows "
-"remota.\n"
-"\n"
-"Si tiene impresoras conectadas a esta måquina, por favor enciéndalas para "
-"que se puedan detectar automåticamente. También deben estar conectadas y "
-"encendidas sus impresoras de red y sus mĂĄquinas Windows.\n"
-"\n"
-"Note que la detecciĂłn automĂĄtica de impresoras en la red toma mĂĄs tiempo que "
-"sĂłlo detectar las impresoras conectadas a esta mĂĄquina. Entonces, desactive "
-"la detecciĂłn automĂĄtica de impresoras de red o en mĂĄquinas Windows cuando no "
-"la necesita.\n"
-"\n"
-"Haga clic sobre \"Siguiente\" cuando esté listo, o sobre \"Cancelar\" si "
-"Usted no desea configurar sus impresoras ahora."
+"El comando \"%s\" también permite modificar las opciones de configuración "
+"para un trabajo de impresión determinado. Simplemente, añada las "
+"configuraciones deseadas a la lĂ­nea de comando, por ejemplo \"%s <archivo>"
+"\". "
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
-"\n"
-"Bienvenido al asistente de configuraciĂłn de la impresora\n"
-"\n"
-"Este asistente le permite instalar impresoras locales o remotas para usarlas "
-"desde esta måquina y también desde otras måquinas de la red.\n"
-"\n"
-"Se le solicitarĂĄ la informaciĂłn necesaria para configurar la impresora y "
-"darle acceso a los controladores de todas las impresoras disponibles, "
-"opciones del controlador y tipos de conexiĂłn de impresoras."
+"En algunos casos, el controlador de %s necesita informaciĂłn extra\n"
+"para funcionar correctamente, aunque normalmente funcione sin ella.\n"
+"ÂżDesea especificar informaciĂłn extra para el controlador o dejar que el "
+"mismo\n"
+"pruebe su equipo y encuentre la informaciĂłn que necesita? A veces,\n"
+"el probar el equipo puede provocar que Ă©ste se cuelgue, pero no deberĂ­a\n"
+"causar ningĂșn daño."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Not the correct CD label. Disk is labelled %s."
+msgstr "No es el CD correcto. El disco estĂĄ etiquetado %s."
+
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
"\n"
+"%s\n"
"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
+"Click on Configure to launch the setup wizard."
msgstr ""
+"ÂĄBienvenido a la herramienta para compartir la conexiĂłn a Internet!\n"
"\n"
+"%s\n"
"\n"
-"Printerdrak no pudo determinar qué modelo es su impresora %s. Por favor, "
-"escoja el modelo correcto de la lista."
+"Haga click sobre Configurar para lanzar el asistente de configuraciĂłn."
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid ")"
-msgstr ")"
+msgid "Cuba"
+msgstr "Cuba"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on "
-msgstr " en "
+msgid "Searching for new printers..."
+msgstr "Buscando impresoras nuevas..."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "("
-msgstr "("
+msgid "Belize"
+msgstr "Belice"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configuring printer ..."
-msgstr "Configurando impresora..."
+msgid " (multi-session)"
+msgstr " (multi-sesiĂłn)"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Searching for new printers..."
-msgstr "Buscando impresoras nuevas..."
+msgid "Kernel Boot Timeout"
+msgstr "Tiempo de espera de arranque del nĂșcleo"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"NOTA: Dependiendo del modelo de la impresora y del sistema de impresiĂłn, se "
-"instalarĂĄn hasta %d MB de software adicional."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr "ÂżEstĂĄ seguro que desea configurar la impresiĂłn en esta mĂĄquina?\n"
+"Su tarjeta puede admitir aceleraciĂłn 3D pero sĂłlo con XFree %s.\n"
+"XFree %s admite su tarjeta y puede tener mejor comportamiento en 2D."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "ÂżDesea habilitar la impresiĂłn en las impresoras mencionadas arriba?\n"
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr ""
+"El asistente de particionamiento de DrakX encontrĂł las siguientes soluciones:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "ÂżDesea habilitar la impresiĂłn en las impresoras en la red local?\n"
+msgid "Hungarian"
+msgstr "HĂșngaro"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
-msgstr ""
-"ÂżDesea habilitar la impresiĂłn en las impresoras mencionadas arriba o en las "
-"impresoras en la red local?\n"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
msgstr ""
-"(Debe asegurarse que todas sus impresoras estĂĄn conectadas y encendidas).\n"
+"Seleccione su proveedor.\n"
+" Si no estĂĄ en la lista, elija No listado"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr "No se encontraron impresoras conectadas directamente a su mĂĄquina"
+msgid "Automatic time synchronization (using NTP)"
+msgstr "SincronizaciĂłn automĂĄtica de hora (usando NTP)"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-"\n"
-"Hay %d impresoras desconocidas conectadas directamente a su sistema"
+msgid "8 MB"
+msgstr "8 MB"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"Hay una impresaora desconocida conectada directamente a su sistema"
+msgid "LDAP Server"
+msgstr "Servidor LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
msgstr ""
-"La siguiente impresora\n"
-"\n"
-"%s%s\n"
-"estĂĄ conectada directamente a su sistema"
+"El soporte PCMCIA se usa por lo general para admitir cosas como tarjetas\n"
+"de red o mĂłdems en ordenadores portĂĄtiles. No se iniciarĂĄ salvo que\n"
+"esté configurado, por lo que no es un problema tenerlo instalado\n"
+"en mĂĄquinas que no lo necesiten."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"Las siguientes impresoras\n"
-"\n"
-"%s%s\n"
-"estĂĄn conectadas directamente a su sistema"
+msgid "Choose your country"
+msgstr "Elija su paĂ­s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The following printers\n"
"\n"
-"%s%s\n"
-"are directly connected to your system"
+"- System Files:\n"
msgstr ""
-"Las siguientes impresoras\n"
"\n"
-"%s%s\n"
-"estĂĄn conectadas directamente a su sistema"
+"- Archivos del sistema:\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "and %d unknown printers"
-msgstr "y %d impresoras desconocidas estĂĄn "
+msgid "Standalone Tools"
+msgstr "Herramientas 'standalone'"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "and one unknown printer"
-msgstr "y una impresora desconocida estĂĄ "
+msgid "Where"
+msgstr "DĂłnde"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Checking your system..."
-msgstr "Verificando su sistema..."
+msgid "but not matching"
+msgstr "pero no hay coincidencias"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Restarting CUPS..."
-msgstr "Reiniciando CUPS..."
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
+msgstr ""
+"AquĂ­ puede seleccionar un controlador alternativo (OSS o ALSA) para su "
+"tarjeta de sonido (%s)"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr "Este servidor ya estå en la lista, no se puede volver a añadir.\n"
+msgid "Configuring PCMCIA cards..."
+msgstr "Configurando tarjetas PCMCIA..."
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr "Ejemplos de IP correctas:\n"
+msgid "kdesu missing"
+msgstr "no se encuentra kdesu"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "La IP ingresada no es correcta.\n"
+msgid "Encryption key"
+msgstr "Clave de cifrado"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Server IP missing!"
-msgstr "ÂĄFalta la IP del servidor!"
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr "Si no se proporciona un puerto, se tomarĂĄ 631 como predeterminado."
+msgid "Christmas Island"
+msgstr "Isla Navidad"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
+msgid "Installation of bootloader failed. The following error occured:"
msgstr ""
-"Ingrese la direcciĂłn IP y el puerto del host cuyas impresoras desea utilizar."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Accediendo impresoras en servidores CUPS remotos"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remove selected server"
-msgstr "Quitar servidor seleccionado"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Edit selected server"
-msgstr "Editar servidor seleccionado"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Add server"
-msgstr "Añadir servidor"
+"FallĂł la instalaciĂłn del cargador de arranque. OcurriĂł el siguiente error:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
-"Añada aquí los servidores CUPS cuyas impresoras desea usar. Sólo necesita "
-"hacer esto si los servidores no difunden la informaciĂłn de sus impresoras en "
-"la red local."
+msgid "EIDE/SCSI channel"
+msgstr "canal EIDE/SCSI"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "IP address of host/network:"
-msgstr "DirecciĂłn IP del host/red:"
+msgid "Set this printer as the default"
+msgstr "Poner esta impresora como predeterminada"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr "Este host/red ya estå en la lista, no se puede volver a añadir.\n"
+msgid "partition %s"
+msgstr "particiĂłn %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr "La IP del host/red ingresada no es correcta.\n"
+msgid "Paranoid"
+msgstr "Paranoica"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Host/network IP address missing."
-msgstr "Falta direcciĂłn IP del host/red."
+msgid "NIS"
+msgstr "NIS"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr ""
-"Elija la red o host donde se deberĂ­an hacer disponibles las impresoras "
-"locales:"
+msgid "<-- Del User"
+msgstr "<-- Borrar usuario"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Sharing of local printers"
-msgstr "Compartir impresoras locales"
+msgid "Location on the bus"
+msgstr "UbicaciĂłn en el bus"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove selected host/network"
-msgstr "Quitar host/red seleccionada."
+msgid "No printer found!"
+msgstr "ÂĄNo se encontrĂł impresora alguna!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Edit selected host/network"
-msgstr "Editar host/red seleccionada"
+msgid "the vendor name of the device"
+msgstr "el nombre del fabricante del dispositivo"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Add host/network"
-msgstr "Añadir host/red"
+msgid "Erase entire disk"
+msgstr "Borrar el disco entero"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
-"Estas son las mĂĄquinas y redes en las cuales deberĂ­a(n) estar disponible(s) "
-"la(s) impresora(s) conectada(s) localmente:"
+msgid " (Default)"
+msgstr " (Por defecto)"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
msgstr ""
-"Cuando se activa esta opciĂłn, cada vez que se inicia CUPS se asegura de "
-"manera automĂĄtica que\n"
-"\n"
-"- si estĂĄ instalado LPD/LPRng, CUPS no sobreescribirĂĄ /etc/printcap\n"
-"\n"
-"- si falta /etc/cups/cupsd.conf, serĂĄ creado\n"
-"\n"
-"- cuando la informaciĂłn de la impresora se difunde, no contiene \"localhost"
-"\" como nombre del servidor.\n"
+"Argumentos: ()\n"
"\n"
-"Si alguna de esas medidas lo pone en problemas, apague esta opciĂłn, pero "
-"entonces, tiene que ocuparse de estos puntos."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "CorrecciĂłn automĂĄtica de la configuraciĂłn de CUPS"
+"Si SERVER_LEVEL (o SECURE_LEVEL si no estĂĄ) es mayor que 3 en\n"
+"/etc/security/msec/security.conf, crea el symlink /etc/security/msec/server\n"
+"para que apunte a /etc/security/msec/server.<SERVER_LEVEL>. /etc/security/"
+"msec/server\n"
+"lo utiliza chkconfig --add para decidir añadir un servicio si estå presente "
+"en el archivo\n"
+"durante la instalaciĂłn de paquetes."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-"Habilitar esto le permite imprimir archivos de texto plano en idioma "
-"japonés. Sólo use esta función y realmente desea imprimir texto en japonés, "
-"si se activa Usted no puede imprimir mĂĄs caracteres acentuados en "
-"tipografías latinas y no podrå ajustar los mårgenes, el tamaño de letra, "
-"etc. Este ajuste sĂłlo afecta a las impresoras definidas en esta mĂĄquina. Si "
-"desea imprimir texto en una impresora ubicada en un mĂĄquina remota, debe "
-"activar esta funciĂłn en dicha mĂĄquina remota."
+msgid "Automatic reconfiguration"
+msgstr "Volver a configurar automĂĄticamente"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Japanese text printing mode"
-msgstr "Modo de impresión de texto japonés"
+msgid "Receiving Speed:"
+msgstr "Velocidad de recepciĂłn:"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
-"Para acceder a impresoras en servidores CUPS remotos en su red local, sĂłlo "
-"necesita habilitar la opciĂłn \"Encontrar automĂĄticamente impresoras "
-"disponibles en mĂĄquinas remotas\"; los servidores CUPS informan a la mĂĄquina "
-"automĂĄticamente sobre sus impresoras. Todas las impresoras que su mĂĄquina "
-"conoce corrientemente se listan en la secciĂłn \"Impresoras remotas\" en la "
-"ventana principal de Printerdrake. Si sus servidores CUPS no estĂĄn en su red "
-"local, tiene que ingresar aquĂ­ las direcciones IP y opcionalmente los "
-"nĂșmeros de puerto para obtener la informaciĂłn de las impresoras de los "
-"servidores."
+msgid "Turks and Caicos Islands"
+msgstr "Islas Turks y Caicos"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "None"
-msgstr "Ninguno"
+msgid "permissions"
+msgstr "permisos"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Additional CUPS servers: "
-msgstr "Servidores CUPS adicionales:"
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
-#, c-format
-msgid "No remote machines"
-msgstr "Ninguna mĂĄquina remota"
+msgid "<- Previous"
+msgstr "<- Anterior"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Custom configuration"
-msgstr "ConfiguraciĂłn personalizada"
+msgid "Internet Connection Sharing configuration"
+msgstr "ConfiguraciĂłn de la conexiĂłn compartida a Internet"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Compartir impresoras en hosts/redes: "
+msgid "Toggle between flat and group sorted"
+msgstr "Cambiar entre vista plana y ordenada por grupos"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr "Encontrar automĂĄticamente impresoras disponibles en mĂĄquinas remotas"
+msgid "Themes"
+msgstr "Temas"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr ""
-"Las impresoras en esta mĂĄquina estĂĄn disponibles para otras computadoras"
+msgid "Options: %s"
+msgstr "Opciones: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
-"También puede decidir aquí si las impresoras en las måquinas remotas "
-"deberĂ­an estar disponibles automĂĄticamente en esta mĂĄquina."
+"En este momento estĂĄ usando %s como gestor de arranque.\n"
+"Haga click sobre configurar para lanzar el asistente de configuraciĂłn."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
-msgstr ""
-"AquĂ­ puede elegir si las impresoras conectadas a esta mĂĄquina deberĂ­an poder "
-"accederse desde måquinas remotas y desde qué måquinas remotas."
+msgid "OKI winprinter configuration"
+msgstr "ConfiguraciĂłn de impresora de windows OKI"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "CUPS printer configuration"
-msgstr "ConfiguraciĂłn de impresora CUPS"
+msgid "Saint Helena"
+msgstr "Santa Helena"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
-msgstr ""
-"DetecciĂłn automĂĄtica de impresora (Impresoras locales, TCP/Socket, y SMB)"
+msgid "Security Level"
+msgstr "Nivel de seguridad"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
+"Some steps are not completed.\n"
"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
msgstr ""
+"Algunas de las etapas no fueron completadas.\n"
"\n"
-"AquĂ­ no tiene que configurar las impresoras en los servidores CUPS remotos; "
-"las mismas se detectarĂĄn automĂĄticamente."
+"ÂżRealmente desea salir ahora?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "How is the printer connected?"
-msgstr "ÂżCĂłmo estĂĄ conectada la impresora?"
+msgid "Sudan"
+msgstr "SudĂĄn"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Select Printer Connection"
-msgstr "Seleccione la conexiĂłn de la impresora"
+msgid "Polish (qwertz layout)"
+msgstr "Polaco (distribuciĂłn qwertz)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
-"La HP LaserJet 1000 necesita que se transfiera su firmware luego de "
-"encenderla. Descargue el paquete de controladores Windows desde el sitio web "
-"de HP (el firmware del CD de la impresora no funciona) y extraiga el archivo "
-"del firmware descomprimiendo el archivo auto-extraĂ­ble .exe con el "
-"utilitario unzip y busque el archivo sihp1000.img. Copie este archivo en el "
-"directorio /etc/printer. AllĂ­ el lo encontrarĂĄ automĂĄticamente el script que "
-"lo transfiere y lo transferirĂĄ cada vez que se conecte y encienda la "
-"impresora.\n"
+msgid "Syria"
+msgstr "Siria"
-#: ../../security/help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
#, c-format
msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the user umask."
-msgstr ""
-"Argumentos: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
"\n"
-"Configurar la umask de usuario."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (val)\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
"\n"
-"Set the shell timeout. A value of zero means no timeout."
msgstr ""
-"Argumentos: (val)\n"
+"ÂĄBienvenido a %s, el selector de SO de arranque!\n"
"\n"
-"Ajustar el timeout del shell. Un valor de cero significa sin timeout."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (size)\n"
+"Elija un sistema operativo de la lista o espere %d segundos\n"
+"para que arranque el sistema predeterminado.\n"
"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-"Argumentos: (size)\n"
-"Ajustar el tamaño de la historia de comandos. Un valor de -1 significa "
-"ilimitada."
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr "si se pone en sĂ­, verificar adiciones/remociones de archivos sgid."
+msgid "Portuguese"
+msgstr "Portugués"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check open ports."
-msgstr "si se pone en sĂ­, verificar puertos abiertos."
+msgid "Loopback file name: "
+msgstr "Nombre del archivo de loopback: "
-#: ../../security/help.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
-"si estĂĄ activo, enviar el correo de reporte a esta direcciĂłn, caso contrario "
-"a root."
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "Las direcciones del servidor DNS deberĂ­an estar en el formato 1.2.3.4"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr "si se pone en sĂ­, reportar resultado de verificaciĂłn por correo-e."
+msgid "Serbia"
+msgstr "Serbia"
-#: ../../security/help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
-"si se pone en sĂ­, verificar archivos/directorios que todos pueden escribir."
+msgid "Newzealand"
+msgstr "Nueva Zelanda"
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr "si se pone en sĂ­, reportar resultados de verificaciĂłn en tty."
+msgid "This directory should remain within the root filesystem"
+msgstr "Este directorio deberĂ­a permanecer dentro del sistema de archivos raĂ­z"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr ""
-"si se pone en sĂ­, correr algunas pruebas contra la base de datos de rpm."
+msgid "CapsLock key"
+msgstr "Tecla CapsLock"
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
-"si se pone en sĂ­, verificar si los dispositivos de red estĂĄn en modo "
-"promiscuo."
+msgid "Install bootloader"
+msgstr "Cargador de arranque"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr "si se pone en sĂ­, ejecutar verificaciones chkrootkit."
+msgid "Select the memory size of your graphics card"
+msgstr "Seleccione la cantidad de memoria de su tarjeta grĂĄfica"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
-"si se pone en sĂ­, verificar permisos de archivos en dirs. personales de "
-"usuarios."
+"[OPCIONES]\n"
+"AplicaciĂłn de monitoreo y conexiĂłn de Internet y redes\n"
+"\n"
+"--defaultintf interfaz : mostar esta interfaz por defecto\n"
+"--connect : conectar a la Internet si no estĂĄ conectado\n"
+"--disconnect : desconectar de la Internet si estĂĄ conectado\n"
+"--force : utilizado con (dis)connect: forzar (des)conexiĂłn.\n"
+"--status : devuelve 1 si estĂĄ conectado, 0 en caso "
+"contrario.\n"
+"--quiet : no ser interactivo. A utilizar con (dis)connect."
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr ""
-"si se pone en sĂ­, verificar adiciones/remociones de archivos suid root."
+msgid "Dynamic IP Address Pool:"
+msgstr "Disponibilidad de direcciones IP dinĂĄmicas:"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr "si se pone en sĂ­, reportar resultado de verificaciĂłn en syslog."
+msgid "LVM name?"
+msgstr "Âżnombre de LVM?"
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
-msgstr ""
-"si se pone en sí, verificar contraseña vacía, sin contraseña en /etc/shadow "
-"y por usuarios con el id 0 que no sean root."
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
+msgstr "Se quitaron algunos dispositivos en la clase de hardware \"%s\":\n"
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr "si se pone en sĂ­, ejecutar las verificaciones de seguridad diarias."
+msgid "Found %s %s interfaces"
+msgstr "%s interfaces %s encontradas"
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr "si se pone en sĂ­, verificar suma de los archivos suid/sgid."
+msgid "sticky-bit"
+msgstr "bit pegajoso"
-#: ../../security/help.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr "si se pone en sí, verificar contraseña vacía en /etc/shadow."
+msgid "Post Install"
+msgstr "Post-instalaciĂłn"
-#: ../../security/help.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "if set to yes, report unowned files."
-msgstr "si se pone en sí, reportar archivos sin dueño."
+msgid "The internal domain name"
+msgstr "El nombre de dominio interno"
-#: ../../security/help.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the root umask."
-msgstr ""
-"Argumentos: (umask)\n"
-"\n"
-"Configurar la umask de root."
+msgid "Card IRQ"
+msgstr "IRQ de la tarjeta"
#: ../../security/help.pm:1
#, c-format
msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
+"Arguments: (umask)\n"
"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+"Set the user umask."
msgstr ""
-"Argumentos: (length, ndigits=0, nupper=0)\n"
+"Argumentos: (umask)\n"
"\n"
-"Configurar la longitud mínima de contraseña y la cantidad mínima de dígitos "
-"y cantidad mĂ­nima de letras mayĂșsculas."
+"Configurar la umask de usuario."
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Configurar la longitud de la historia de contraseñas para prevenir "
-"reutilización de contraseñas."
+msgid "logdrake"
+msgstr "logdrake"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
-"Argumentos: (max, inactive=-1)\n"
-"\n"
-"Configurar edad de contraseñas en \\fImax\\fP días y demorar el cambio a "
-"\\fIinactive\\fP."
+"AplicaciĂłn de importaciĂłn y monitoreo de tipografĂ­as\n"
+"--windows_import : importar desde todas las particiones Windows "
+"disponibles.\n"
+"--xls_fonts : mostrar todas las tipografĂ­as que ya existen en xls\n"
+"--strong : verificaciĂłn fuerte de las tipografĂ­as.\n"
+"--install : aceptar cualquier tipografĂ­a o directorio de "
+"tipografĂ­as.\n"
+"--uninstall : desinstalar cualquier tipografĂ­a o directorio de tipog.\n"
+"--replace : reemplazar las tipografĂ­as si ya existen.\n"
+"--application : 0 ninguna aplicaciĂłn.\n"
+" : 1 todas las aplicaciones soportadas disponibles.\n"
+" : nombre_de_aplicaciĂłn como por ej. so para staroffice\n"
+" y gs para ghostscript."
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
-"Argumentos: (name)\n"
-"\n"
-"Añadir el nombre como una excepción al manejo de edad de contraseñas por "
-"msec."
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgstr "[--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Habilitar/Deshabilitar sulogin(8) en nivel de usuario Ășnico."
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "Elija la disquetera que desea usar para crear el disco de arranque"
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Activar/desactivar verificaciones diarias de seguridad."
+msgid "LILO with text menu"
+msgstr "LILO con menĂș de texto"
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Activar/desactivar verificaciones de promiscuidad de tarjetas Ethernet."
+msgid "Everything (no firewall)"
+msgstr "Todo (sin cortafuegos)"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Usar contraseña para autenticar usuarios."
+msgid "You must specify a kernel image"
+msgstr "Debe especificar una imagen del nĂșcleo"
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Permitir su sĂłlo a miembros del grupo wheel o permitir su a cualquier "
-"usuario."
+msgid ", multi-function device on USB"
+msgstr ", dispositivo multi-funciĂłn en USB"
-#: ../../security/help.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Habilitar/deshabilitar verificaciĂłn horaria de seguridad de msec."
+msgid "Do"
+msgstr "Hacer"
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
+msgid "Contacting the mirror to get the list of available packages..."
msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Habilitar/deshabilitar registro de paquetes IPv4 extraños."
+"Contactando con el sitio de réplica para obtener la lista de los paquetes "
+"disponibles..."
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Habilitar/deshabilitar libsafe si es que se encuentra en el sistema."
+msgid "Lithuanian AZERTY (old)"
+msgstr "Lituano AZERTY (antiguo)"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Habilitar/deshabilitar protección contra engaño de IP."
+msgid "Brazilian (ABNT-2)"
+msgstr "Brasileño (ABNT-2)"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
-msgstr ""
-"Argumentos: (arg, alert=1)\n"
-"\n"
-"Habilitar/deshabilitar protección de engaño de resolución de nombres. Si\n"
-"\\fIalert\\fP es verdadero, también reportar a syslog."
+msgid "IP address of host/network:"
+msgstr "DirecciĂłn IP del host/red:"
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
-"Argumentos: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Habilitar/deshabilitar reportes de syslog en consola 12. \\fIexpr\\fP es la\n"
-"expresiĂłn que describe que registrar (vea syslog.conf(5) para mĂĄs detalles) "
-"y\n"
-"dev el dispositivo donde reportar el registro."
+"coordenada y del ĂĄngulo superior\n"
+"izquierdo de la barra de progreso"
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Habilitar/deshabilitar crontab y at para usuarios. Poner los permitidos en /"
-"etc/cron y /etc/at.allow\n"
-"(ver man at(1) y crontab(1))."
+msgid "System installation"
+msgstr "InstalaciĂłn del sistema"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
-msgstr ""
-"Argumentos: ()\n"
-"\n"
-"Si SERVER_LEVEL (o SECURE_LEVEL si no estĂĄ) es mayor que 3 en\n"
-"/etc/security/msec/security.conf, crea el symlink /etc/security/msec/server\n"
-"para que apunte a /etc/security/msec/server.<SERVER_LEVEL>. /etc/security/"
-"msec/server\n"
-"lo utiliza chkconfig --add para decidir añadir un servicio si estå presente "
-"en el archivo\n"
-"durante la instalaciĂłn de paquetes."
+msgid "Saint Vincent and the Grenadines"
+msgstr "San Vicente y las Granadinas"
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Autorizar todos los servicios controlados por tcp_wrappers (ver hosts.deny"
-"(5)) si \\fIarg\\fP = ALL. SĂłlo los locales\n"
-"si \\fIarg\\fP = LOCAL y ninguno si \\fIarg\\fP = NONE. Para autorizar los "
-"servicios que necesita, use /etc/hosts.allow\n"
-"(ver hosts.allow(5))."
+msgid "/File/_Open"
+msgstr "/Archivo/_Abrir"
#: ../../security/help.pm:1
#, c-format
@@ -13576,1089 +13135,840 @@ msgstr ""
"El argumento especifica si los clientes estĂĄn autorizados a conectar\n"
"al servidor X en el puerto TCP 6000 o no."
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
-msgstr ""
-"Argumentos: (arg, listen_tcp=None)\n"
-"\n"
-"Permitir/Prohibir conexiones X. El primer argumento especifica qué se hace\n"
-"en el lado cliente: ALL (permitir todas las conexiones), LOCAL (sĂłlo\n"
-"conexiones locales) y NONE (ninguna conexiĂłn)"
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Permitir/Prohibir la lista de usuarios del sistema en administradores de "
-"conexiĂłn (kdm y gdm)"
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Permitir/Prohibir conexiĂłn directa de root."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Permitir/Prohibir conexiĂłn remota de root."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Permitir/Prohibir reinicio por parte del usuario de la consola."
-
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Si \\fIarg\\fP = ALL permitir que existan /etc/issue y /etc/issue.net. Si "
-"\\fIarg\\fP = NONE no se\n"
-"permiten \"issues\", de lo contrario sĂłlo se permite /etc/issue."
+msgid "Location of auto_install.cfg file"
+msgstr "UbicaciĂłn del archivo auto_install.cfg"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Permitir/Prohibir conexiĂłn automĂĄtica."
+msgid "Open Firmware Delay"
+msgstr "Demora de Open firmware"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Aceptar/Rechazar eco ICMP."
+msgid "Hungary"
+msgstr "HungrĂ­a"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse broadcasted icmp echo."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Aceptar/Rechazar eco ICMP difundido."
+msgid "Total progess"
+msgstr "Progreso total"
-#: ../../security/help.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Accept/Refuse bogus IPv4 error messages."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Aceptar/Rechazar mensajes de error IPv4 simulados."
+msgid "Color configuration"
+msgstr "ConfiguraciĂłn del color"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "Administrador de la seguridad (login o correo electrĂłnico)"
+msgid "New Zealand"
+msgstr "Nueva Zelanda"
#: ../../security/level.pm:1
#, c-format
msgid ""
-"A library which defends against buffer overflow and format string attacks."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
msgstr ""
-"Una biblioteca que le defiende ante ataques de desbordamiento de bĂșfer y "
-"ataques con cadenas de formato."
-
-#: ../../security/level.pm:1
-#, c-format
-msgid "Use libsafe for servers"
-msgstr "Utilizar libsafe para los servidores"
+"Ya hay algunas restricciones, y todas las noches se corren mĂĄs "
+"verificaciones automĂĄticas."
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Security level"
-msgstr "Nivel de seguridad"
+msgid "please choose the date to restore"
+msgstr "Por favor, elija la fecha para restaurar"
-#: ../../security/level.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please choose the desired security level"
-msgstr "Por favor, elija el nivel de seguridad deseado"
+msgid "Switching from ext2 to ext3"
+msgstr "Cambiando de ext2 a ext3"
-#: ../../security/level.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "DrakSec Basic Options"
-msgstr "Opciones bĂĄsicas de DrakSec"
+msgid "LPRng"
+msgstr "LPRng"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Basado en el nivel anterior, pero el sistema estĂĄ completamente cerrado.\n"
-"Las caracterĂ­sticas de seguridad estĂĄn al mĂĄximo."
+msgid "Netherlands Antilles"
+msgstr "Antillas Holandesas"
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"Con este nivel de seguridad, es posible utilizar el sistema como un "
-"servidor.\n"
-"La seguridad es lo suficientemente alta como para usar el sistema como un\n"
-"servidor que acepte conexiones de mĂșltiples clientes. Nota: si su mĂĄquina "
-"sĂłlo es un cliente en la Internet, mejor deberĂ­a elegir un nivel inferior."
+msgid "Browse to new restore repository."
+msgstr "Examinar un repositorio de restauraciĂłn nuevo."
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
msgstr ""
-"Ya hay algunas restricciones, y todas las noches se corren mĂĄs "
-"verificaciones automĂĄticas."
+"\n"
+"Bienvenido al asistente de configuraciĂłn de la impresora\n"
+"\n"
+"Este asistente le permite instalar impresoras locales o remotas para usarlas "
+"desde esta måquina y también desde otras måquinas de la red.\n"
+"\n"
+"Se le solicitarĂĄ la informaciĂłn necesaria para configurar la impresora y "
+"darle acceso a los controladores de todas las impresoras disponibles, "
+"opciones del controlador y tipos de conexiĂłn de impresoras."
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Éste es el nivel de seguridad estándar recomendado para una máquina que se\n"
-"utilizarĂĄ para conectarse a la Internet como cliente."
+msgid "and %d unknown printers"
+msgstr "y %d impresoras desconocidas estĂĄn "
-#: ../../security/level.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
msgstr ""
-"Las contraseñas estån activadas, pero tampoco se recomienda usar este\n"
-"nivel para un ordenador conectado a una red."
+"Los chips Intel Pentium fabricados primero tienen un bug en el procesador de "
+"coma flotante que no lograba la precisiĂłn deseada cuando se realizaba una "
+"divisiĂłn de coma flotante (FDIV)"
-#: ../../security/level.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
+msgid "No ISDN PCI card found. Please select one on the next screen."
msgstr ""
-"Este nivel se debe usar con mucho cuidado. Hace su sistema mĂĄs simple de\n"
-"usar, pero también mucho mås vulnerable: no debe usarse para una måquina\n"
-"conectada en red con otras o a Internet. No hay contraseñas de acceso."
-
-#: ../../security/level.pm:1
-#, c-format
-msgid "Paranoid"
-msgstr "Paranoica"
+"No se encontrĂł tarjeta PCI RDSI. Por favor, seleccione una en la pantalla "
+"siguiente."
-#: ../../security/level.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Higher"
-msgstr "MĂĄs alta"
+msgid "GB"
+msgstr "GB"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "High"
-msgstr "Alta"
+msgid "Please give a user name"
+msgstr "Introduzca el nombre de usuario"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Poor"
-msgstr "Pobre"
+msgid "Enable CD Boot?"
+msgstr "ÂżHabilitar el arranque desde CD?"
-#: ../../security/level.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Welcome To Crackers"
-msgstr "Bienvenidos, crackers"
+msgid " enter `void' for void entry"
+msgstr "ingrese `void' para una entrada vacĂ­a"
-#: ../../standalone/XFdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Abra de nuevo una sesiĂłn %s para activar los cambios"
+msgid "on Hard Drive"
+msgstr "en disco rĂ­gido"
-#: ../../standalone/XFdrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Por favor salga de la sesiĂłn y luego pulse Ctrl-Alt-BackSpace"
+msgid "Winmodem connection"
+msgstr "ConexiĂłn por winmodem"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
-msgstr "/etc/hosts.allow y /etc/hosts.deny ya configurados - no se cambiaron"
+msgid ""
+"\n"
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
+msgstr ""
+"\n"
+"Enhorabuena, su impresora estĂĄ instalada y configurada.\n"
+"\n"
+"Puede imprimir usando el comando \"Imprimir\" de su aplicaciĂłn (normalmente "
+"se encuentra en el menĂș \"Archivo\").\n"
+"\n"
+"Si quiere añadir, borrar o renombrar una impresora, o si quiere cambiar las "
+"opciones de configuraciĂłn por defecto (bandeja de entrada de papel, calidad "
+"de impresiĂłn, ...), seleccione \"Impresora\" en la secciĂłn de \"Hardware\" "
+"del Centro de control de Mandrake."
-#: ../../standalone/drakTermServ:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "ÂĄPrimero debe crear /etc/dhcpd.conf!"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Set the password history length to prevent password reuse."
+msgstr ""
+"Argumentos: (arg)\n"
+"\n"
+"Configurar la longitud de la historia de contraseñas para prevenir "
+"reutilización de contraseñas."
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "ÂĄOcurriĂł algo malo! - ÂżEstĂĄ instalado mkisofs?"
+msgid "Now, you can run xawtv (under X Window!) !\n"
+msgstr "ÂĄAhora, puede ejecutar xawtv (!bajo X Window!)!\n"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr "La imagen ISO Etherboot es %s"
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr ""
+"Espacio de intercambio insuficiente para completar la instalación, añada un "
+"poco mĂĄs"
-#: ../../standalone/drakTermServ:1
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No floppy drive available!"
-msgstr "ÂĄNinguna disquetera disponible!"
+msgid "%s on %s"
+msgstr "%s en %s"
-#: ../../standalone/drakTermServ:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Floppy can be removed now"
-msgstr "Ya se puede quitar el disquete"
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
+"GNU/Linux administra la hora en GMT (\"Greenwich Mean Time\", Hora del\n"
+"Meridiano de Greenwich) y la traduce a la hora local de acuerdo al huso\n"
+"horario que Usted seleccionĂł. Sin embargo, es posible desactivar esto\n"
+"quitando la marca de la casilla \"%s\", lo que harĂĄ que GNU/Linux sepa que\n"
+"el reloj del sistema y el reloj de hardware estĂĄn en el mismo huso horario.\n"
+"Esto es Ăștil cuando la mĂĄquina tambiĂ©n alberga otro sistema operativo como\n"
+"Windows.\n"
+"\n"
+"La opciĂłn \"%s\" regularĂĄ automĂĄticamente el reloj conectĂĄndose a un\n"
+"servidor remoto de la hora en la Internet. Para que esta caracterĂ­stica\n"
+"funcione debe tener una conexiĂłn con la Internet funcionando. En realidad,\n"
+"esta opciĂłn instala un servidor de la hora que puede ser utilizado por\n"
+"otras mĂĄquinas en su red local."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Couldn't access the floppy!"
-msgstr "ÂĄNo se pudo acceder al disquete!"
+msgid "Which is your timezone?"
+msgstr "ÂżCuĂĄl es su huso horario?"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please insert floppy disk:"
-msgstr "Por favor, inserte un disquete:"
+msgid "Guinea"
+msgstr "Guinea"
-#: ../../standalone/drakTermServ:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Write Config"
-msgstr "Escribir configuraciĂłn"
+msgid "The system is now connected to the Internet."
+msgstr "Ahora el sistema estĂĄ conectado a la Internet."
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr "Disponibilidad de direcciones IP dinĂĄmicas:"
+msgid "South Georgia and the South Sandwich Islands"
+msgstr "Islas Georgia del Sur y Sandwich del Sur"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-"La mayorĂ­a de estos valores se tomaron\n"
-"de su sistema actual.\n"
-"Los puede modificar si es necesario."
+msgid "Japan (broadcast)"
+msgstr "JapĂłn (difusiĂłn)"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "ConfiguraciĂłn del servidor dhcpd"
+msgid "Mozambique"
+msgstr "Mozambique"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "IP Range End:"
-msgstr "Fin de rango IP:"
+msgid "Icon"
+msgstr "Icono"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "IP Range Start:"
-msgstr "Comienzo de rango IP:"
+msgid "Please choose what you want to backup"
+msgstr "Por favor, elija qué desea respaldar"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Name Servers:"
-msgstr "Servidores de nombres:"
+msgid "256 colors (8 bits)"
+msgstr "256 colores (8 bits)"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "Domain Name:"
-msgstr "Nombre de dominio:"
+msgid "Read-write"
+msgstr "Lectura/Escritura"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Broadcast Address:"
-msgstr "DirecciĂłn de difusiĂłn:"
+msgid "Size: %s\n"
+msgstr "Tamaño: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Subnet Mask:"
-msgstr "MĂĄscara de subred:"
+msgid "Hostname: "
+msgstr "Nombre de la mĂĄquina: "
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Routers:"
-msgstr "Routers:"
+msgid "Chunk size %s\n"
+msgstr "Tamaño de los bloques %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Netmask:"
-msgstr "MĂĄscara de red:"
+msgid "Build the future of Linux!"
+msgstr "ÂĄConstruya el futuro de Linux!"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Subnet:"
-msgstr "Subred:"
+msgid "Local Printer"
+msgstr "Impresora local"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
msgstr ""
-"Debe reiniciar el Display Manager para que los cambios tengan efecto. \n"
-"(service dm restart - en la consola)"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "dhcpd Config..."
-msgstr "ConfiguraciĂłn de dhcpd..."
+" Copyright (C) 2001-2002 MandrakeSoft por DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Delete Client"
-msgstr "Borrar cliente"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgstr "[--file=miarchivo] [--word=mipalabra] [--explain=regexp] [--alert]"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "<-- Edit Client"
-msgstr "<-- Editar cliente"
+msgid "ADSL connection"
+msgstr "ConexiĂłn ADSL"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add Client -->"
-msgstr "Añadir cliente -->"
+msgid "No configuration, please click Wizard or Advanced.\n"
+msgstr ""
+"Sin configuraciĂłn, por favor haga clic sobre el Asistente o Avanzado.\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Allow Thin Clients"
-msgstr "Permitir Clientes livianos"
+msgid "Error!"
+msgstr "ÂĄError!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Thin Client"
-msgstr "Cliente liviano"
+msgid "cable connection detected"
+msgstr "detectada conexiĂłn por cable"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No net boot images created!"
-msgstr "ÂĄNo se crearon imĂĄgenes de arranque por red!"
+msgid "Permission denied transferring %s to %s"
+msgstr "Permiso denegado transfiriendo %s a %s"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "type: %s"
-msgstr "tipo: %s"
+msgid "/_Report Bug"
+msgstr "/_Reportar un error"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "<-- Del User"
-msgstr "<-- Borrar usuario"
+msgid "Resize"
+msgstr "Redimensionar"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add User -->"
-msgstr "Añadir usuario -->"
+msgid "Dominica"
+msgstr "Dominica"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
+msgid "Please enter the device name to use for backup"
msgstr ""
-"!!! Indica que la contraseña en la base de datos del sistema es diferente\n"
-"de la de la base de datos del Servidor de Terminales.\n"
-"Quite/agregue el usuario al Servidor de Terminales para permitir conexiĂłn."
+"Por favor, ingrese el nombre del dispositivo a utilizar para el respaldo"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Delete All NBIs"
-msgstr "Borrar todos los NBI"
+msgid "Resolution: %s\n"
+msgstr "ResoluciĂłn: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "<-- Delete"
-msgstr "<-- Borrar"
+msgid "matching"
+msgstr "coincidencia"
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
#, c-format
-msgid "This will take a few minutes."
-msgstr "Esto tomarĂĄ algunos minutos."
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
+msgstr ""
+"No se puede acceder a los mĂłdulos del nĂșcleo correspondientes a su nĂșcleo "
+"(no se encuentra el archivo %s), esto generalmente significa que su disquete "
+"de arranque no contiene un nĂșcleo de misma versiĂłn que el soporte de "
+"instalaciĂłn (haga un nuevo disquete de arranque por favor)"
-#: ../../standalone/drakTermServ:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Build All Kernels -->"
-msgstr "Construir todos los nĂșcleos -->"
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"Por favor seleccione el puerto correcto. Por ejemplo, el puerto \"COM1\"\n"
+"bajo Windows se denomina \"ttyS0\" bajo GNU/Linux."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "No NIC selected!"
-msgstr "ÂĄNo se seleccionĂł NIC!"
+msgid "The following packages are going to be removed"
+msgstr "Se van a quitar los siguientes paquetes"
-#: ../../standalone/drakTermServ:1
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
#, c-format
-msgid "Build Single NIC -->"
-msgstr "Construir NIC Ășnica -->"
+msgid "Connect to the Internet"
+msgstr "Conectar a Internet"
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "No kernel selected!"
-msgstr "ÂĄNo se seleccionĂł nĂșcleo!"
+msgid "Use existing partitions"
+msgstr "Usar la particiĂłn existente"
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Build Whole Kernel -->"
-msgstr "Construir el nĂșcleo completo -->"
+msgid "Canadian (Quebec)"
+msgstr "Canadiense (Quebec)"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Boot ISO"
-msgstr "ISO de arranque"
+msgid "Mouse device: %s\n"
+msgstr "Dispositivo del ratĂłn: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Boot Floppy"
-msgstr "Disquete de arranque"
+msgid "Reselect correct fonts"
+msgstr "Volver a seleccionar tipografĂ­as correctas"
-#: ../../standalone/drakTermServ:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
-"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
+"Options Description:\n"
"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
-"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
"\n"
msgstr ""
-"Generalidades de drakTermServ\n"
-"\t\t\t\n"
-" - Crear imĂĄgenes de arranque con Etherboot habilitado:\n"
-" \t\tPara arrancar un nĂșcelo por Etherboot, se debe crear una imagen de "
-"arranque initrd/nĂșcleo especial\n"
-" \t\tmkinitrd-net hace mucho de esto y drakTermServ sĂłlo es una "
-"interfaz grĂĄfica\n"
-" \t\tpara ayudar a administrar/personalizar estas imĂĄgenes.\n"
-"\n"
-" - Mantener /etc/dhcp.conf:\n"
-" \t\tPara arrancar los clientes desde la red, cada cliente necesita una "
-"entrada dhcpd.conf asignando una direcciĂłn IP\n"
-" \t\ty las imĂĄgenes de arranque para la mĂĄquina. drakTermServ ayuda a "
-"crear/quitar estas entradas.\n"
-"\t\t\t\n"
-" \t\t(Las tarjetas PCI pueden omitir la imagen - etherboot pedirĂĄ la "
-"imagen correcta. También\n"
-" \t\tdeberĂ­a considerar que cuando etherboot busca las imĂĄgenes, espera "
-"nombres como\n"
-" \t\tboot-3c59x.nbi, en vez de boot-3c59x.2.4.19-16mdk.nbi)\n"
-"\t\t\t\n"
-" \t\tUna entrada tĂ­pica de dhcpd.conf para soportar un cliente sin "
-"disco luce asĂ­:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\thardware ethernet\t00:20:af:2f:7f:9d;\n"
-"\t\t\t\tfixed address\t\t192.168.192.3;\n"
-"\t\t\t\t/*type\t\t\tfat;*/\n"
-"\t\t\t\tfilename\t\t\"i386/boot/boot-3c509.2.4.18-6mdk.nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tSi bien puede utilizar una cantidad de direcciones IP, en vez de "
-"configurar una entrada\n"
-"\t\t\tespecĂ­fica para cada cliente, usar un esquema de direcciones fijas "
-"facilita el uso\n"
-"\t\t\tde la funcionalidad de archivos de configuraciĂłn especĂ­ficos para los "
-"clientes\n"
-"\t\t\tque brinda ClusterNFS.\n"
-"\t\t\t\n"
-"\t\t\tNota: La entrada \"/*type\" sĂłlo la utiliza drakTermServ. Los "
-"clientes pueden ser \"thin\"*/\n"
-"\t\t\to 'fat'. Los clientes livianos corren la mayorĂ­a del software en el "
-"servidor por medio de xdmcp, mientras que los clientes pesados corren la "
-"mayorĂ­a\n"
-"\t\t\tdel software en la mĂĄquina cliente. Un inittab especial, /etc/inittab\\"
-"$\\$IP=client_ip\\$\\$ se\n"
-"\t\t\tescribe para los clientes livianos. Los archivos de configuraciĂłn del "
-"sistema xdm-config, kdmrc, y gdm.conf se modifican\n"
-"\t\t\tsi se utilizan clientes livianos, para habilitar xdmcp. Debido a que "
-"hay problemas de seguridad al utilizar xdmcp,\n"
-"\t\t\thosts.deny y hosts.allow se modifican para limitar el acceso a la "
-"subred local.\n"
-"\t\t\t\n"
-"\t\t\tNota: Debe detener/iniciar el servidor luego de añadir o cambiar "
-"clientes.\n"
-"\t\t\t\n"
-" - Maintener /etc/exports:\n"
-" \t\tClusternfs permite exportar la raĂ­z del sistema de archivos a "
-"los clientes sin disco. drakTermServ\n"
-" \t\tconfigura la entrada correcta para permitir acceso anĂłnimo al "
-"sistema de archivos raĂ­z desde\n"
-" \t\tlos clientes sin disco.\n"
-"\n"
-" \t\tUna entrada exports tĂ­pica para clusternfs es:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBRED/MÁSCARA(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tDonde SUBRED/MÁSCARA estån definidas por su red.\n"
-" \t\t\n"
-" - Maintener /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tPara que los usuarios puedan conectarse al sistema desde un "
-"cliente sin disco, la entrada en\n"
-" \t\t/etc/shadow debe duplicarse en /etc/shadow\\$\\$CLIENTS\\$\\$. "
-"drakTermServ ayuda\n"
-" \t\ten este aspecto añadiendo o quitando usuarios del sistema de "
-"este archivo.\n"
-"\n"
-" - /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$ por cliente:\n"
-" \t\tA través de clusternfs, cada cliente sin disco puede tener sus "
-"archivos de configuraciĂłn Ășnicos\n"
-" \t\ten el sist. de archivos raĂ­z del servidor. En el futuro "
-"drakTermServ ayudarĂĄ a crear\n"
-" \t\testos archivos.\n"
-"\n"
-" - Archivos de configuraciĂłn del sistema por cliente:\n"
-" \t\tA través de clusternfs, cada cliente sin disco puede tener sus "
-"archivos de configuraciĂłn Ășnicos\n"
-" \t\ten el sist. de archivos raĂ­z del servidor. En el futuro "
-"drakTermServ ayudarĂĄ a crear archivos\n"
-" \t\tcomo /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard sobre una base\n"
-" \t\tpor cliente.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ configurarĂĄ este archivo para trabajar en conjunto "
-"con las imĂĄgenes creadas\n"
-" \t\tpor mkinitrd-net, y las entradas en /etc/dhcpd.conf, para servir "
-"la imagen de arranque\n"
-" \t\ta cada cliente sin disco.\n"
-"\n"
-" \t\tUn archivo de configuraciĂłn tĂ­pico de tftp luce asĂ­:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tAquĂ­ los cambios con respecto a lo predeterminado son cambiar el "
-"flag disable a\n"
-" \t\t'no' y cambiar la ruta del directorio a /var/lib/tftpboot, donde "
-"mkinitrd-net\n"
-" \t\tpone sus imĂĄgenes.\n"
+"descricpiĂłn de las opciones:\n"
"\n"
-" - Crear disquetes/CDs Etherboot:\n"
-" \t\tLas mĂĄquinas sin disco necesitan o bien imĂĄgenes ROM en las NIC, "
-"o un disquete o\n"
-" \t\tCD de arranque para iniciar la secuencia de arranque. "
-"drakTermServ ayudarĂĄ a generar estas,\n"
-" \t\tbasadas en la NIC en la mĂĄquina cliente.\n"
-" \t\t\n"
-" \t\tUn ejemplo bĂĄsico para crear un disquete de arranque para una "
-"3Com 3c509 manualmente:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin /\\n \t\t\t/usr/lib/"
-"etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Por favor, tenga cuidado cuando use respaldos por ftp, porque\n"
+"sĂłlo los respaldos ya hechos se envĂ­an al servidor.\n"
+"Por el momento, necesita realizar el respaldo en su disco rĂ­gido\n"
+"antes de enviarlo al servidor.\n"
"\n"
-#: ../../standalone/drakTermServ:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
+"Options\n"
"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
+"Opciones\n"
"\n"
-"\n"
-" Gracias:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+" AquĂ­ puede elegir si desea que su mĂĄquina cambie automĂĄticamente a la\n"
+"interfaz grĂĄfica al arrancar. Obviamente, querrĂĄ marcar \"%s\" si su\n"
+"sistema actuarĂĄ como servidor, o si no tuvo Ă©xito en la configuraciĂłn de su\n"
+"pantalla."
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
-msgstr ""
-"\n"
-"Copyright (C) 2002 por MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
+msgid "We are now going to configure the %s connection."
+msgstr "Ahora vamos a configurar la conexiĂłn %s."
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Add/Del Clients"
-msgstr "Añadir/Quitar clientes"
+msgid "MandrakeExpert Corporate"
+msgstr "MandrakeExpert Corporativo"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Add/Del Users"
-msgstr "Añadir/Quitar usuarios"
+msgid ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
+msgstr ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resoluciĂłn"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Write protection"
+msgstr "DetecciĂłn automĂĄtica de impresoras"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "You've not selected any font"
+msgstr "no se pueden encontrar tipografĂ­as.\n"
+
+#: ../../steps.pm:1
#, c-format
-msgid "Net Boot Images"
-msgstr "ImĂĄgenes de arranque por la red"
+msgid "Language"
+msgstr "Elija su idioma"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "Disquete/ISO Etherboot"
+msgid "Printer model selection"
+msgstr "SelecciĂłn del modelo de impresora"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Stop Server"
-msgstr "Detener el Servidor"
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
+msgstr ""
+"Se perderån todos los datos de la partición %s después de cambiar su tipo"
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
#, c-format
-msgid "Start Server"
-msgstr "Iniciar el Servidor"
+msgid "%d seconds"
+msgstr "%d segundos"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Disable Server"
-msgstr "Deshabilitar el Servidor"
+msgid "Insert a blank floppy in drive %s"
+msgstr "Inserte un disquete en blanco en la unidad %s"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Enable Server"
-msgstr "Habiltar el Servidor"
+msgid "A valid URI must be entered!"
+msgstr "ÂĄDebe introducir un URI vĂĄlido!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "ConfiguraciĂłn del Servidor de Terminales de Mandrake"
+msgid "Found \"%s\" interface do you want to use it ?"
+msgstr "Se encontrĂł la interfaz \"%s\", Âżdesea utilizarla?"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Remove the last item"
-msgstr "Borrar el Ășltimo elemento"
+msgid "Re-configure interface and DHCP server"
+msgstr "Volver a configurar la interfaz y el servidor DHCP"
-#: ../../standalone/drakautoinst:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Add an item"
-msgstr "Añadir un elemento"
+msgid "Sound configuration"
+msgstr "ConfiguraciĂłn de sonido"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Auto Install"
-msgstr "InstalaciĂłn automĂĄtica"
+msgid "Photo test page"
+msgstr "PĂĄgina de prueba de foto"
-#: ../../standalone/drakautoinst:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"El disquete ha sido generado satisfactoriamente.\n"
-"Ahora puede repetir su instalaciĂłn."
+msgid "Custom disk partitioning"
+msgstr "Particionamiento de disco personalizado"
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congratulations!"
-msgstr "ÂĄFelicidades!"
+msgid "Enter Printer Name and Comments"
+msgstr "Ingrese nombre de la impresora y comentarios"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"The following printers\n"
"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
+"Las siguientes impresoras\n"
"\n"
-"Bienvenido.\n"
-"\n"
-"Los parĂĄmetros de la instalaciĂłn automĂĄticas estĂĄn disponibles en las "
-"secciones de la izquierda"
+"%s%s\n"
+"estĂĄn conectadas directamente a su sistema"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Creating auto install floppy"
-msgstr "Creando el disquete de instalaciĂłn automĂĄtica"
+msgid "type: %s"
+msgstr "tipo: %s"
-#: ../../standalone/drakautoinst:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "manual"
-msgstr "manual"
+msgid "Slovakian (QWERTY)"
+msgstr "Eslovaco (QWERTY)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/draksound:1
#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Por favor, elija para cada paso si desea que se repita como su instalaciĂłn, "
-"o el mismo serĂĄ manual"
+msgid "No Sound Card detected!"
+msgstr "ÂĄNo se detectĂł tarjeta de sonido!"
-#: ../../standalone/drakautoinst:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "ConfiguraciĂłn de pasos automĂĄticos"
+msgid "Mouse Port"
+msgstr "Puerto del ratĂłn"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "replay"
-msgstr "reproducir"
+msgid ""
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
+msgstr ""
+"Debe reiniciar el Display Manager para que los cambios tengan efecto. \n"
+"(service dm restart - en la consola)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Ftp Server"
+msgstr "Servidor FTP"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+"Arguments: (arg)\n"
"\n"
-"Do you want to continue?"
+"Enable/Disable msec hourly security check."
msgstr ""
-"EstĂĄ a punto de configurar el un disquete de InstalaciĂłn AutomĂĄtica. Esta "
-"caracterĂ­stica es algo peligrosa y debe ser utilizada con cuidado.\n"
-"\n"
-"Con esa caracterĂ­stica, podrĂĄ repetir la instalaciĂłn que ha realizado en "
-"esta computadora, y se le consultarĂĄ interactivamente en algunos pasos, para "
-"poder cambiar los valores de los mismos.\n"
-"\n"
-"Para mĂĄxima seguridad, el particionado y formateado nunca serĂĄ realizado "
-"automĂĄticamente, sin importar lo que eligiĂł durante la instalaciĂłn de esta "
-"computadora.\n"
+"Argumentos: (arg)\n"
"\n"
-"ÂżDesea continuar?"
+"Habilitar/deshabilitar verificaciĂłn horaria de seguridad de msec."
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "Configurador de InstalaciĂłn AutomĂĄtica"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "%s fonts conversion"
+msgstr "ConversiĂłn de tipografĂ­as PFM"
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "No se encuentra el archivo de imagen `%s' necesario."
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the type of bus on which the mouse is connected"
+msgstr "El tipo de bus sobre el que estĂĄ conectado el ratĂłn"
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
#, c-format
-msgid "Error!"
-msgstr "ÂĄError!"
+msgid "Uganda"
+msgstr "Uganda"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (size)\n"
"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
+"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
-"\n"
-"Problemas durante la restauraciĂłn:\n"
-"\n"
-"Durante el paso de restauraciĂłn, Drakbackup verificarĂĄ todos los\n"
-"archivos de respaldo antes de restaurarlos.\n"
-"Antes de la restuaraciĂłn, Drakbackup quitarĂĄ el\n"
-"directorio original, y perderĂĄ todos los datos en el mismo.\n"
-"Es importante ser cuidadoso y no modificar los archivos de\n"
-"datos de respaldo a mano.\n"
+"Argumentos: (size)\n"
+"Ajustar el tamaño de la historia de comandos. Un valor de -1 significa "
+"ilimitada."
-#: ../../standalone/drakbackup:1
-#, c-format
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"options description:\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
"\n"
-msgstr ""
-"descricpiĂłn de las opciones:\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
"\n"
-"Por favor, tenga cuidado cuando use respaldos por ftp, porque\n"
-"sĂłlo los respaldos ya hechos se envĂ­an al servidor.\n"
-"Por el momento, necesita realizar el respaldo en su disco rĂ­gido\n"
-"antes de enviarlo al servidor.\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
"\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"Description:\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
+"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
msgstr ""
-"DescripciĂłn:\n"
+"A manera de revisiĂłn, DrakX presentarĂĄ un resumen de las distintas\n"
+"informaciones que tiene acerca de su sistema. Dependiendo del hardware\n"
+"instalado puede tener algunas o todas las entradas siguientes. Cada entrada\n"
+"estĂĄ compuesta del elemento de configuraciĂłn a configurar, seguido de un\n"
+"pequeño resumen de la configuración corriente. Haga clic sobre el botón\n"
+"\"%s\" correspondiente para cambiar eso.\n"
"\n"
-" Drakbackup se usa para respaldar su sistema.\n"
-" Durante la configuraciĂłn puede seleccionar:\n"
-"\t- Archivos del sistema,\n"
-"\t- Archivos de usuarios,\n"
-"\t- Otros archivos.\n"
-"\to Todo su sistema ... y Otros (como Particiones Windows)\n"
+" * \"%s\": verifique la configuraciĂłn de la disposiciĂłn corriente del\n"
+"teclado y cĂĄmbiela si es necesario.\n"
"\n"
-" Drakbackup le permite respaldar su sistema sobre:\n"
-"\t- Disco rĂ­gido.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (con autoboot, rescue y autoinstall.)\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Cinta.\n"
+" * \"%s\": verifique la selecciĂłn corriente del paĂ­s. Si Usted no se\n"
+"encuentra en este paĂ­s haga clic sobre el botĂłn \"%s\" y elija otro. Si su\n"
+"paĂ­s no se muestra en la primer lista haga clic sobre el botĂłn \"%s\" para\n"
+"obtener la lista completa de paĂ­ses.\n"
"\n"
-" Drakbackup le permite restaurar su sistema a un\n"
-" directorio seleccionado por el usuario.\n"
+" * \"%s\": De manera predeterminada DrakX deduce su huso horario basĂĄndose\n"
+"en el paĂ­s que ha elegido. Puede hacer clic sobre el botĂłn \"%s\" si esto\n"
+"no es correcto.\n"
"\n"
-" Predeterminadamente se almacenarĂĄn todos los respaldos en\n"
-" su directorio /var/lib/drakbackup.\n"
+" * \"%s\": verifique la configuraciĂłn del ratĂłn y haga clic sobre el botĂłn\n"
+"para cambiarla, si es necesario.\n"
"\n"
-" Archivo de configuraciĂłn:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+" * \"%s\": al hacer clic sobre el botĂłn \"%s\" se abrirĂĄ el asistente de\n"
+"configuraciĂłn de la impresora. Consulte el capĂ­tulo correspondiente de la\n"
+"\"GuĂ­a de Comienzo\" para mĂĄs informaciĂłn sobre cĂłmo configurar una\n"
+"impresora nueva. La interfaz presentada allĂ­ es similar a la utilizada\n"
+"durante la instalaciĂłn.\n"
"\n"
+" * \"%s\": si se detecta una tarjeta de sonido en su sistema, la misma se\n"
+"muestra aquĂ­. Si nota que la tarjeta de sonido mostrada no es la que estĂĄ\n"
+"realmente instalada en su sistema, puede hacer clic sobre el botĂłn y elegir\n"
+"otro controlador.\n"
"\n"
-"Paso de restauraciĂłn:\n"
-" \n"
-" Durante la restauraciĂłn, DrakBackup quitarĂĄ su \n"
-" directorio original y verificarĂĄ que todos \n"
-" los archivos de respaldo no estén corruptos. Se \n"
-" recomienda que haga un Ășltimo respaldo antes de restaurar.\n"
+" * \"%s\": de manera predeterminada DrakX configura su interfaz grĂĄfica en\n"
+"\"800x600\" o \"1024x768\" de resoluciĂłn. Si eso no le satisface, haga clic\n"
+"sobre \"%s\" para volver a configurar su interfaz grĂĄfica.\n"
+"\n"
+" * \"%s\": si se detecta una tarjeta de TV en su sistema, la misma se\n"
+"muestra aquĂ­. Si tiene una tarjeta de TV y la misma no se detecta, haga\n"
+"clic sobre \"%s\" para intentar configurarla a mano.\n"
+"\n"
+" * \"%s\": si se detecta una tarjeta RDSI en su sistema, la misma se\n"
+"muestra aquĂ­. Puede hacer clic sobre \"%s\" para cambiar los parĂĄmetros\n"
+"asociados a la misma.\n"
+"\n"
+" * \"%s\": haga clic sobre \"%s\" si desea configurar ahora el acceso a la\n"
+"Internet o a su red local.\n"
+"\n"
+" * \"%s\": esta entrada le ofrece volver a definir el nivel de seguridad\n"
+"como se ajustĂł en un paso previo ()\n"
"\n"
+" * \"%s\": si planifica conectar su mĂĄquina a la Internet, es una buena\n"
+"idea protegerse de las intrusiones configurando un cortafuegos. Consulte la\n"
+"secciĂłn correspondiente de la \"GuĂ­a de Comienzo\" para detalles acerca de\n"
+"los ajustes del cortafuegos.\n"
"\n"
+" * \"%s\": si desea cambiar la configuraciĂłn de su cargador de arranque,\n"
+"haga clic sobre ese botĂłn. Esto deberĂ­a estar reservado para usuarios\n"
+"avanzados.\n"
+"\n"
+" * \"%s\": aquí podrå tener un control fino sobre qué servicios correrån en\n"
+"su mĂĄquina. Si planifica utilizar esta mĂĄquina como servidor es una buena\n"
+"idea revisar estos ajustes."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Comoros"
+msgstr "Comores"
+
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+"\n"
+"\n"
+"\n"
+"We are now going to configure the %s connection.\n"
+"\n"
+"\n"
+"Press OK to continue."
msgstr ""
-" actualizaciones 2002 MandrakeSoft por Stew Benedict <sbenedict"
-"\\@mandrakesoft.com>"
+"\n"
+"\n"
+"\n"
+"Ahora vamos a configurar la conexiĂłn %s.\n"
+"\n"
+"\n"
+"Pulse siguiente para continuar."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Yaboot mode"
+msgstr "Modo de Yaboot"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
+msgstr "EEUU (cable)"
+
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
-" Copyright (C) 2001-2002 MandrakeSoft por DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"ÂĄNo se puede volver a iniciar LiLo!\n"
+"Ejecute \"lilo\" como root en la lĂ­nea de comandos para completar la "
+"instalaciĂłn del tema de LiLo."
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Ratón de 3 botones genérico"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Select another media to restore from"
+msgstr "Elija otro soporte desde el cual restaurar"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Software Manager"
+msgstr "Administrador de software"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"restore description:\n"
+"Restore Description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
@@ -14670,17 +13980,19 @@ msgid ""
"\n"
" - Incremental Backups:\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
msgstr ""
"descripciĂłn de la restauraciĂłn:\n"
@@ -14706,5093 +14018,5793 @@ msgstr ""
"\n"
"\n"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-"descripciĂłn de las opciones:\n"
-"\n"
-" - Respladar archivos del sistema:\n"
-" \n"
-"\tEsta opciĂłn permite respaldar su directorio /etc, que\n"
-"\tcontiene todos los archivos de configuraciĂłn. Por favor\n"
-"\ttenga cuidado durante la restauraciĂłn de no sobre-escribir:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Respaldar archivos de usuario:\n"
-"\n"
-"\tEsta opciĂłn permite seleccionar todos los usuarios que\n"
-"\tdesea respaldar.\n"
-"\tPara preservar espacio, se recomienda no incluir el\n"
-"\tcache del navegador web.\n"
-"\n"
-" - Respaldar otros archivos:\n"
-"\n"
-"\tEsta opción permite añadir mås datos a guardar.\n"
-"\tCon el otro respaldo no es posible, por ahora,\n"
-"\tseleccionar el respaldo incremental.\t\t\n"
-" \n"
-" - Respaldo incremental:\n"
-"\n"
-"\tEl respaldo incremental es la opciĂłn mĂĄs potente.\n"
-"\tLe permite respaldar todos sus datos la primera\n"
-"\tvez, y luego sĂłlo aquellos que cambiaron.\n"
-"\tLuego, podrĂĄ, durante la etapa de restauraciĂłn,n\trestaurar sus datos "
-"desde una fecha especificada.\n"
-"\t\n"
-"\tSi no ha seleccionado esta opciĂłn todos los\n"
-"\trespaldos antiguos se borran antes de volver a respaldar.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Algunos errores con sendmail son causados por\n"
-" una configuraciĂłn mala de postfix. Para resolverlo tiene\n"
-" que configurar myhostname o mydomain en /etc/postfix/main.cf\n"
-"\n"
+msgid "Re-submit"
+msgstr "Reenviar"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-"descripciĂłn de las opciones:\n"
-"\n"
-" En este paso Drakbackup le permite cambiar:\n"
-"\n"
-" - El modo de compresiĂłn:\n"
-" \n"
-" Si marca compresiĂłn bzip2, comprimirĂĄ mejor sus datos\n"
-" que gzip (alrededor del 2-10 %%).\n"
-" Por defecto, esta opciĂłn no estĂĄ marcada dado que este\n"
-" modo de compresiĂłn necesita mĂĄs tiempo (100 veces mĂĄs)\n"
-" \n"
-" - El modo de actualizaciĂłn:\n"
-"\n"
-" Esta opciĂłn actualizarĂĄ su respaldo, pero no es\n"
-" realmente Ăștil ya que necesita descomprimirlo\n"
-" antes que pueda actualizarlo.\n"
-" \n"
-" - el modo .backupignore:\n"
-"\n"
-" Al igual que cvs, Drakbackup ignorarĂĄ todas las referencias\n"
-" incluĂ­das en los archivos .backupignore de cada directorio.\n"
-" ej: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
+msgid "CD in place - continue."
+msgstr "CD en su lugar - continuar."
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Drakbackup"
-msgstr "Drakbackup"
+msgid "KB"
+msgstr "KB"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restore"
-msgstr "Restaurar"
+msgid "Network & Internet"
+msgstr "Redes e Internet"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup Now"
-msgstr "Respaldar Ahora"
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Lituano \"fonético\" QWERTY"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Advanced Configuration"
-msgstr "ConfiguraciĂłn avanzada"
+msgid "Net Boot Images"
+msgstr "ImĂĄgenes de arranque por la red"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Wizard Configuration"
-msgstr "ConfiguraciĂłn del Asistente"
+msgid "Sharing of local scanners"
+msgstr "Compartir escĂĄneres locales"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "View Backup Configuration."
-msgstr "Ver configuraciĂłn del respaldo"
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr "FallĂł la prueba Plug'n Play. Por favor, elija un monitor especĂ­fico"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Backup Now from configuration file"
-msgstr "Respaldar Ahora desde archivo de configuraciĂłn"
+msgid "Services and deamons"
+msgstr "Servicios y demonios"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Drakbackup Configuration"
-msgstr "ConfiguraciĂłn de Drakbackup"
+msgid "Remote host name missing!"
+msgstr "ÂĄFalta el nombre del host remoto!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Total Progress"
-msgstr "Progreso total"
+msgid "with /usr"
+msgstr "con /usr"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sending files..."
-msgstr "Enviando archivos..."
+msgid "Network"
+msgstr "Red"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "files sending by FTP"
-msgstr "EnvĂ­o de archivos por FTP"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgstr ""
+"Detectar automĂĄticamente las impersoras conectadas a mĂĄquinas que corren "
+"Microsoft Windows"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup other files"
-msgstr "Respaldar otros archivos"
+msgid "This password is too simple"
+msgstr "Esta contraseña es demasiado sencilla"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup user files"
-msgstr "Respaldar archivos de usuarios"
+msgid "Slovakian (QWERTZ)"
+msgstr "Eslovaco (QWERTZ)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "Backup system files"
-msgstr "Respaldar archivos del sistema"
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
+"Modificar y crear en diferentes lenguajes tales como Perl, Python, C, C++ "
+"nunca ha sido tan fĂĄcil como ahora gracias a GNU gcc 3 y los mejores "
+"entornos de desarrollo Open Source."
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Under Devel ... please wait."
-msgstr "En desarrollo ... por favor, espere."
+msgid "Truly minimal install (especially no urpmi)"
+msgstr "InstalaciĂłn mĂ­nima \"en serio\" (especialmente sin urpmi)"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+" Transfer \n"
+"Now"
msgstr ""
-"No se econtrĂł el archivo de configuraciĂłn,\n"
-" por favor haga clic sobre Asistente o Avanzado."
+"Transferir \n"
+"Ahora"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please select data to backup..."
-msgstr "Por favor, elija los datos a respaldar..."
+msgid "Use daemon"
+msgstr "Usar servidor"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
#, c-format
-msgid "Please select media for backup..."
-msgstr "Por favor, seleccione el soporte para la copia de respaldo..."
+msgid "Authentication"
+msgstr "AutentificaciĂłn"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please select data to restore..."
-msgstr "Por favor, seleccione los datos a restaurar..."
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Agregar esta impresora a Star Office/OpenOffice.org/GIMP"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Se deben instalar los siguientes paquetes:\n"
+msgid "Additional CUPS servers: "
+msgstr "Servidores CUPS adicionales:"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
-"Error enviando el archivo por FTP.\n"
-" Por favor, corrija su configuraciĂłn de FTP."
+"Elija una de las impresoras detectadas automĂĄticamente de la lista o ingrese "
+"el nombre del host o la IP y el nĂșmero de puerto opcional (9100, por "
+"defecto) en los campos."
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount %s?"
+msgstr "ÂżDĂłnde desea montar a %s?"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Restore Via Network"
+msgstr "Restaurar por medio de la red"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Algeria"
+msgstr "Argelia"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd-size"
+msgstr "Tamaño de initrd"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
+#, c-format
msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
-"Error enviando correo con sendmail.\n"
-" Su correo-e de reporte no se enviĂł.\n"
-" Por favor, configure a sendmail"
+"En caso que estén disponibles diferentes servidores para su tarjeta, con o\n"
+"sin aceleraciĂłn de 3D, entonces se le propone elegir el servidor que mejor\n"
+"satisface sus necesidades."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Next"
-msgstr "Siguiente"
+msgid "\tBackups use tar and gzip\n"
+msgstr "\tRespaldar usando tar y gzip\n"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Previous"
-msgstr "Anterior"
+msgid "2 MB"
+msgstr "2 MB"
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Save"
-msgstr "Guardar"
+msgid ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
+"[OPCIÓN]...\n"
+" --no-confirmation no pedir confirmaciĂłn en modo MandrakeUpdate\n"
+" --no-verify-rpm no verificar firmas de los paquetes\n"
+" --changelog-first mostrar changelog antes de lista de archivos en "
+"ventana de descripciĂłn\n"
+" --merge-all-rpmnew proponer mezclar todos los archivos .rpmnew/.rpmsave "
+"encontrados"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build Backup"
-msgstr "Realizar copia de respaldo"
+msgid "Setting Default Printer..."
+msgstr "Configurando impresora predeterminada..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Restore Progress"
-msgstr "Progreso de restauraciĂłn"
+msgid "Interface %s (using module %s)"
+msgstr "Interfaz %s (usando el mĂłdulo %s)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Restore From Catalog"
-msgstr "Restaurar desde CatĂĄlogo"
+msgid "Name: %s\n"
+msgstr "Nombre: %s\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Browse to new restore repository."
-msgstr "Examinar un repositorio de restauraciĂłn nuevo."
+msgid "Generating preview ..."
+msgstr "Generando previsualizaciĂłn..."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "CD in place - continue."
-msgstr "CD en su lugar - continuar."
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
+msgstr ""
+"La frec. deberĂ­a tener el sufijo k, M o G (por ejemplo, \"2.46G\" para una "
+"frec. de 2.46 GHz), o añadir suficientes '0' (ceros)"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Custom Restore"
-msgstr "RestauraciĂłn personalizada"
+msgid "serial"
+msgstr "serie"
-#: ../../standalone/drakbackup:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Restore all backups"
-msgstr "Restaurar todas las copias de respaldo"
+msgid "DVD-ROM"
+msgstr "DVD-ROM"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Failed..."
-msgstr "FallĂł la restauraciĂłn..."
+msgid "Georgian (\"Latin\" layout)"
+msgstr "Georgiano (estilo \"latĂ­n\")"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Files Restored..."
-msgstr "Archivos restaurados..."
+msgid "Get the best items with Mandrake Linux Strategic partners"
+msgstr "Obtenga lo mejor con los socios estratégicos de Mandrake Linux"
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Path or Module required"
-msgstr "Se necesita Ruta o MĂłdulo"
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
+msgstr ""
+"Ahora puede proporcionar las opciones al mĂłdulo %s.\n"
+"Note que cualquier direcciĂłn debe ingresarse con el prefijo 0x, ej.: '0x123'"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Hostname required"
-msgstr "Se necesita nombre del host"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
+msgstr ""
+"Mandrake Linux 9.1 le brinda el Centro de Control de Mandrake, una "
+"herramienta potente para adaptar por completo su computadora al uso que hace "
+"de la misma. Configure y personalice elementos tales como el nivel de "
+"seguridad, los periféricos (pantalla, ratón, teclado...), la conexión con la "
+"Internet, ÂĄy mucho mĂĄs!"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Username required"
-msgstr "Se necesita nombre de usuario"
+msgid "Kenya"
+msgstr "Kenia"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Password required"
-msgstr "Se necesita contraseña"
+msgid "Use ``Unmount'' first"
+msgstr "Use \"Desmontar\" primero"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Host Path or Module"
-msgstr "Ruta del host o mĂłdulo"
+msgid "Installing mtools packages..."
+msgstr "Instalando paquetes mtools..."
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Host Name"
-msgstr "Nombre del host"
+msgid "You must specify a root partition"
+msgstr "Debe especificar una particiĂłn raĂ­z"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr "Restaurar por medio del protocolo de red: %s"
+msgid "first step creation"
+msgstr "primer paso de creaciĂłn"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Via Network"
-msgstr "Restaurar por medio de la red"
+msgid "Both Shift keys simultaneously"
+msgstr "Ambas teclas Shift simultĂĄneamente"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr "No es la cinta adecuada. La cinta estĂĄ etiquetada %s."
+msgid "Select a scanner model"
+msgstr "Seleccione un modelo de escĂĄner"
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-"Inserte la cinta con la etiqueta de volumen %s\n"
-" en la unidad de cinta %s"
+msgid "LPRng - LPR New Generation"
+msgstr "LPRng - LPR de nueva generaciĂłn"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore From Tape"
-msgstr "Restaurar desde cinta"
+msgid "Drakbackup Configuration"
+msgstr "ConfiguraciĂłn de Drakbackup"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr "No es el CD correcto. El disco estĂĄ etiquetado %s."
+msgid "Save as.."
+msgstr "Guardar como..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
msgstr ""
-"Inserte el CD con la etiqueta de volumen %s\n"
-" en la unidad de CD bajo el punto de montaje /mnt/cdrom"
+"TodavĂ­a no se ha configurado esta interfaz.\n"
+"Lance el asistente de configuraciĂłn en la ventana principal"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore From CD"
-msgstr "Restaurar desde CD"
+msgid "Korea (North)"
+msgstr "Corea (del Norte)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup files not found at %s."
-msgstr "Copiar archivos no encontrados en %s."
+msgid "Autologin"
+msgstr "ConexiĂłn automĂĄtica"
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Change\n"
-"Restore Path"
-msgstr ""
-"Cambiar la\n"
-"ruta de restauraciĂłn"
+msgid "System configuration"
+msgstr "ConfiguraciĂłn del sistema"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Domain Admin Password"
+msgstr "Contraseña del Administrador del Dominio"
+
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Files"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
msgstr ""
-"Restaurar los archivos\n"
-"seleccionados"
+"Adapte perfectamente su computadora a sus necesidades gracias a las 11 "
+"interfaces de usuario de Mandrake Linux las cuales se pueden modificar por "
+"completo: KDE3.1, Gnome 2.2, WindowMaker..."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Configuring printer ..."
+msgstr "Configurando impresora..."
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
-"Restaurar entrada\n"
-"del CatĂĄlogo seleccionada"
+"Para asegurar la integridad de los datos luego de cambiar el tamaño a\n"
+"las particiones, se pueden ejecutar verificaciones de los sist. de archivos\n"
+"la prĂłxima vez que arranque en Windows(TM)"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Remove user directories before restore."
-msgstr "Borrar directorios de los usuarios antes de restaurar."
+msgid "MB"
+msgstr "MB"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
+msgid "if set to yes, run some checks against the rpm database."
msgstr ""
-"Realizar respaldo nuevo antes de restaurar (sĂłlo para respaldos "
-"incrementales)"
+"si se pone en sĂ­, correr algunas pruebas contra la base de datos de rpm."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "select path to restore (instead of /)"
-msgstr "seleccione la ruta para restaurar (en vez de /)"
+msgid "Virgin Islands (British)"
+msgstr "Islas VĂ­rgenes (BritĂĄnicas)"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore Other"
-msgstr "Restaurar otros"
+msgid "Bermuda"
+msgstr "Bermuda"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Restore Users"
-msgstr "Restaurar usuarios"
+msgid "click here if you are sure."
+msgstr "haga clic aquĂ­ si estĂĄ seguro."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore system"
-msgstr "Restaurar archivos del sistema"
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
+msgstr ""
+"No se econtrĂł el archivo de configuraciĂłn,\n"
+" por favor haga clic sobre Asistente o Avanzado."
-#: ../../standalone/drakbackup:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Other Media"
-msgstr "Otros soportes"
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"AquĂ­ se listan las particiones Linux existentes que se detectaron en su\n"
+"disco rĂ­gido. Puede mantener las elecciones hechas por el asistente, ya que\n"
+"las mismas son buenas para las instalaciones mĂĄs comunes. Si hace cambios,\n"
+"al menos debe definir una particiĂłn raĂ­z (\"/\"). No elija una particiĂłn\n"
+"muy pequeña o no podrå instalar software suficiente. Si desea almacenar sus\n"
+"datos en una partición separada, también puede necesitar crear una\n"
+"particiĂłn para \"/home\" (sĂłlo es posible si tiene mĂĄs de una particiĂłn\n"
+"Linux disponible)\n"
+"\n"
+"Cada particiĂłn se lista como sigue: \"Nombre\", \"Capacidad\".\n"
+"\n"
+"\"Nombre\" estĂĄ estructurado: \"tipo de disco rĂ­gido\", \"nĂșmero de disco\n"
+"rĂ­gido\", \"nĂșmero de particiĂłn\" (por ejemplo, \"hda1\").\n"
+"\n"
+"\"Tipo de disco rĂ­gido\" es \"hd\" si su disco es un disco IDE y \"sd\" si\n"
+"el mismo es un disco SCSI.\n"
+"\n"
+"\"NĂșmero de disco rĂ­gido\" siempre es una letra que sigue a \"hd\" o a\n"
+"\"sd\". Para los discos IDE:\n"
+"\n"
+" * \"a\" significa \"disco rĂ­gido maestro en la controladora IDE\n"
+"primaria\",\n"
+"\n"
+" * \"b\" significa \"disco rĂ­gido esclavo en la controladora IDE\n"
+"primaria\",\n"
+"\n"
+" * \"c\" significa \"disco rĂ­gido maestro en la controladora IDE\n"
+"secundaria\",\n"
+"\n"
+" * \"d\" significa \"disco rĂ­gido esclavo en la controladora IDE\n"
+"secundaria\".\n"
+"\n"
+"Para los discos SCSI, una \"a\" significa \"SCSI ID menor\", una \"b\"\n"
+"significa \"segunda SCSI ID menor\", etc."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Select another media to restore from"
-msgstr "Elija otro soporte desde el cual restaurar"
+msgid "Remove"
+msgstr "Quitar"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-"Por favor, ingrese el directorio donde se almacenan las copias de respaldo"
+msgid "Lesotho"
+msgstr "Lesoto"
-#: ../../standalone/drakbackup:1
+#: ../../ugtk2.pm:1
#, c-format
-msgid "Restore from Hard Disk."
-msgstr "Restaurar desde el disco rĂ­gido."
+msgid "utopia 25"
+msgstr "utopia 25"
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Use quota for backup files."
-msgstr "Usar cuota para archivos de respaldo"
+msgid "Pipe job into a command"
+msgstr "Filtrar el trabajo en un comando"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
+msgid "new dynamic device name generated by core kernel devfs"
msgstr ""
-"Por favor, ingrese el tamaño måximo\n"
-" permitido para Drakbackup"
+"dispositivo dinĂĄmico nuevo generado por el devfs incorporado del nĂșcleo"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Please enter the directory to save:"
-msgstr "Por favor, ingrese el directorio a guardar:"
+msgid "Yes"
+msgstr "SĂ­"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use Hard Disk to backup"
-msgstr "Usar el disco rĂ­gido para copia de respaldo"
+msgid "Cote d'Ivoire"
+msgstr "Costa de Marfil"
-#: ../../standalone/drakbackup:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "please choose the date to restore"
-msgstr "Por favor, elija la fecha para restaurar"
+msgid "Which protocol do you want to use?"
+msgstr "¿Qué protocolo desea utilizar?"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup the system files before:"
-msgstr "Respaldar los archivos del sistema anteriores a:"
+msgid "Restore Progress"
+msgstr "Progreso de restauraciĂłn"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
+msgid "Estonia"
+msgstr "Estonia"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Choose the host on which the local scanners should be made available:"
msgstr ""
-"Lista de usuarios a restaurar (sĂłlo importa la fecha mĂĄs reciente por "
-"usuario)"
+"Elija el host donde se deberĂ­an hacer disponibles los escĂĄneres locales:"
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "OK to restore the other files."
-msgstr "Se pueden restaurar los otros archivos."
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
+msgstr ""
+"Tiene un hueco en la tabla de particiones, pero no se puede usar.\n"
+"La Ășnica soluciĂłn es desplazar sus particiones primarias para que el hueco "
+"esté después de las particiones extendidas"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " Restore Configuration "
-msgstr " ConfiguraciĂłn de la restauraciĂłn"
+msgid "Channel"
+msgstr "Canal"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid " Successfuly Restored on %s "
-msgstr " Recuperados satisfactoriamente en %s"
+msgid "Add"
+msgstr "Agregar"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid " All of your selected data have been "
-msgstr " Todos los datos seleccionados han sido "
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "No se ha configurado la conexiĂłn compartida a Internet."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup files are corrupted"
-msgstr "Los archivos de respaldo estĂĄn corruptos"
+msgid " Error while sending mail. \n"
+msgstr " Error durante el envĂ­o de correo. \n"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Por favor, desmarque o quĂ­telo la prĂłxima vez."
+msgid "Keyboard"
+msgstr "Teclado"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"List of data corrupted:\n"
-"\n"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-"Lista de datos corruptos:\n"
-"\n"
+"Inserte el CD con la etiqueta de volumen %s\n"
+" en la unidad de CD bajo el punto de montaje /mnt/cdrom"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"List of data to restore:\n"
-"\n"
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
msgstr ""
-"Lista de datos a restaurar:\n"
-"\n"
+"La tasa deberĂ­a tener el sufijo k, M o G (por ejemplo, \"11M\" para 11M), o "
+"añadir suficientes '0' (ceros)"
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-"Sin configuraciĂłn, por favor haga clic sobre el Asistente o Avanzado.\n"
+msgid "Choose the connection you want to configure"
+msgstr "Elija la conexiĂłn que desea configurar"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "\t-Network by webdav.\n"
-msgstr "\t-Red por webdav.\n"
+msgid "Please wait, setting security level..."
+msgstr "Por favor espere, configurando el nivel de seguridad..."
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t-Red por rsync.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
+msgstr "Mandrake Linux 9.1 es la mejor plataforma de desarrollo."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Red por SSH.\n"
+msgid "Configuring network device %s"
+msgstr "Configurando el dispositivo de red %s"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Red por FTP.\n"
+msgid "activated"
+msgstr "activado"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "\t-Tape \n"
-msgstr "\t-Tape \n"
+msgid "Please choose which network interface will be used for the dhcp server."
+msgstr ""
+"Por favor, elija la interfaz de red que se utilizarĂĄ para el servidor DHCP."
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
+msgid "Finding packages to upgrade..."
+msgstr "Encontrando los paquetes a actualizar..."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t-Disco rĂ­gido.\n"
+msgid "Mount point: "
+msgstr "Punto de montaje: "
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
-msgstr ""
-"\n"
-"- Servidor (%s) incluye :\n"
+msgid "parse all fonts"
+msgstr "analizar todas las tipografĂ­as"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tRespaldar usando tar y gzip\n"
+msgid "With X"
+msgstr "Con X"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tRespaldar usando tar y bzip2\n"
+msgid "Multi-head configuration"
+msgstr "ConfiguraciĂłn multi-monitor"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "\tDo not include System Files\n"
-msgstr "\tNo incluir archivos del sistema\n"
+msgid "No browser available! Please install one"
+msgstr "ÂĄNo hay un navegador disponible! Por favor, instale uno"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
"\n"
-"- Options:\n"
+"%s"
msgstr ""
+"ÂżConservar los cambios?\n"
+"La configuraciĂłn actual es:\n"
"\n"
-"- Opciones:\n"
+"%s"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t nombre de usuario: %s\n"
-"\t\t en ruta: %s \n"
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "No se puede usar ReiserFS para particiones menores de 32MB"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"- Save via %s on host: %s\n"
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
-"\n"
-"- Guardar usando %s en el host: %s\n"
+"El protocolo rwho permite que los usuarios remotos obtengan una lista\n"
+"de todos los usuarios conectados a una mĂĄquina que ejecuta el demonio rwho\n"
+"(similar al finger)."
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "\t\tErase=%s"
-msgstr "\t\tErase=%s"
+msgid "Domain name"
+msgstr "Nombre de dominio"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-"\n"
-"- Guardar en cinta en el dispositivo: %s"
+msgid "Sharing of local printers"
+msgstr "Compartir impresoras locales"
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
#, c-format
-msgid " (multi-session)"
-msgstr " (multi-sesiĂłn)"
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgstr "http://www.mandrakelinux.com/en/91errata.php3"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on device: %s"
-msgstr " en el dispositivo: %s"
+msgid "Available printers"
+msgstr "Impresoras disponibles"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "RW"
-msgstr "RW"
+msgid "Empty"
+msgstr "VacĂ­o"
-#: ../../standalone/drakbackup:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
-"- Burn to CD"
-msgstr ""
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
"\n"
-"- Grabar en CD"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
"\n"
-"- Borrar los archivos tar del disco luego de la copia de respaldo.\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
"\n"
-"- Guardar en el disco en la ruta: %s\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+"Monitor\n"
"\n"
-"- Other Files:\n"
-msgstr ""
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
"\n"
-"- Otros archivos:\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- User Files:\n"
+"\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
+"X (por \"X Window System\") es el corazĂłn de la interfaz grĂĄfica de\n"
+"GNU/Linux en el que se apoyan todos los entornos grĂĄficos (KDE, GNOME,\n"
+"AfterStep, WindowMaker, etc.) que se incluyen con Mandrake Linux.\n"
"\n"
-"- Archivos de usuario:\n"
+"Se le presentarĂĄ la lista de parĂĄmetros diferentes a cambiar para obtener\n"
+"una presentaciĂłn grĂĄfica Ăłptima: Tarjeta grĂĄfica\n"
+"\n"
+" Normalmente el instalador puede detectar y configurar automĂĄticamente la\n"
+"tarjeta grĂĄfica instalada en su mĂĄquina. Si este no es el caso, en esta\n"
+"lista puede elegir la tarjeta que realmente posee.\n"
+"\n"
+" En caso que estén disponibles diferentes servidores para su tarjeta, con\n"
+"o sin aceleraciĂłn de 3D, entonces se le propone elegir el servidor que\n"
+"mejor satisface sus necesidades.\n"
+"\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+" Normalmente el instalador puede detectar y configurar automĂĄticamente el\n"
+"monitor conectado a su mĂĄquina. Si este no es el caso, en esta lista puede\n"
+"elegir el monitor que realmente posee.\n"
+"\n"
+"\n"
+"\n"
+"ResoluciĂłn\n"
+"\n"
+" AquĂ­ puede elegir las resoluciones y profundidades de color entre\n"
+"aquellas disponibles para su hardware. Elija la que mejor se ajuste a sus\n"
+"necesidades (tenga presente que eso se puede cambiar luego de la\n"
+"instalaciĂłn) En el monitor se muestra un ejemplo de la configuraciĂłn\n"
+"elegida.\n"
+"\n"
+"\n"
+"\n"
+"Probar\n"
+"\n"
+" El sistema intentarĂĄ abrir una pantalla grĂĄfica con la resoluciĂłn\n"
+"deseada. Si puede ver el mensaje durante la prueba, y responde \"%s\",\n"
+"entonces DrakX continuarĂĄ con el paso siguiente. Si no puede ver el\n"
+"mensaje, significa que alguna parte de la configuraciĂłn detectada\n"
+"automĂĄticamente no era la correcta y la prueba terminarĂĄ automĂĄticamente\n"
+"luego de 12 segundos, restaurando el menĂș. Cambie los ajustes hasta obtener\n"
+"una pantalla correcta.\n"
+"\n"
+"\n"
+"\n"
+"Opciones\n"
+"\n"
+" AquĂ­ puede elegir si desea que su mĂĄquina cambie automĂĄticamente a la\n"
+"interfaz grĂĄfica al arrancar. Obviamente, querrĂĄ marcar \"%s\" si su\n"
+"sistema actuarĂĄ como servidor, o si no tuvo Ă©xito en la configuraciĂłn de su\n"
+"pantalla."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "text width"
+msgstr "ancho del texto"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount device %s?"
+msgstr "ÂżDĂłnde desea montar el dispositivo %s?"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The default lease (in seconds)"
+msgstr "El \"lease\" predeterminado (en segundos)"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Interface \"%s\""
+msgstr "Interfaz \"%s\""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "With basic documentation (recommended!)"
+msgstr "Con documentaciĂłn bĂĄsica (ÂĄrecomendado!)"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "1 button"
+msgstr "1 botĂłn"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"- System Files:\n"
+"There are %d unknown printers directly connected to your system"
msgstr ""
"\n"
-"- Archivos del sistema:\n"
+"Hay %d impresoras desconocidas conectadas directamente a su sistema"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
+#, c-format
+msgid "Test"
+msgstr "Probar"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"Backup Sources: \n"
+"Allow/Forbid direct root login."
msgstr ""
+"Argumentos: (arg)\n"
"\n"
-"Fuentes de respaldo: \n"
+"Permitir/Prohibir conexiĂłn directa de root."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select user manually"
-msgstr "Seleccionar manualmente el usuario"
+msgid "Korea"
+msgstr "Corea"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Backup Users"
-msgstr "Respaldar usuarios"
+msgid "Your choice? (default `%s'%s) "
+msgstr "ÂżSu elecciĂłn? (por defecto %s'%s) "
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Backup system"
-msgstr "Respaldar el sistema"
+msgid "Raw printer"
+msgstr "Impresora en crudo"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "Por favor, elija qué desea respaldar"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "official vendor name of the cpu"
+msgstr "Nombre oficial del fabricante de la CPU"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "on Tape Device"
-msgstr "en Dispositivo de Cinta"
+msgid "Vendor"
+msgstr "Fabricante"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "on CDROM"
-msgstr "en CDROM"
+msgid "Interface %s"
+msgstr "Interfaz %s"
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "across Network"
-msgstr "a través de la red"
+msgid "Configure mouse"
+msgstr "ConfiguraciĂłn del ratĂłn"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "on Hard Drive"
-msgstr "en disco rĂ­gido"
+msgid "Choose the mount points"
+msgstr "Seleccione los puntos de montaje"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Please choose where you want to backup"
-msgstr "Por favor, elija dĂłnde desea realizar la copia de respaldo"
+msgid "OK"
+msgstr "Aceptar"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "More Options"
-msgstr "MĂĄs opciones"
+msgid "Yugoslavian (latin)"
+msgstr "Yugoslavo (latĂ­n)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "When"
-msgstr "CuĂĄndo"
+msgid "Installing"
+msgstr "Instalando"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Where"
-msgstr "DĂłnde"
+msgid "Launch userdrake"
+msgstr "Lanzar UserDrake"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "What"
-msgstr "Qué"
+msgid "Is this an install or an upgrade?"
+msgstr "ÂżEs una instalaciĂłn o una actualizaciĂłn?"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr "Borrar los archivos tar del disco luego de respaldar a otro soporte."
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "ISDN card"
+msgstr "Tarjeta RDSI interna"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Send mail report after each backup to:"
-msgstr "Enviar reporte por correo-e luego de cada respaldo a :"
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
+msgstr ""
+"Para compartir su conocimiento y ayudar a construir herramientas Linux, "
+"Ășnase a los foros de discusiĂłn que encontrarĂĄ en nuestras pĂĄginas web para "
+"la \"Comunidad\""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
"\n"
-"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-"Por favor, asegĂșrese que el servidor cron estĂĄ incluĂ­do entre sus "
-"servicios.\n"
+"Felicidades, la configuraciĂłn de la red y de Internet ha terminado.\n"
"\n"
-"Note que, por ahora, todos los soportes de \"red\" también utilizan el disco."
+"Ahora se aplicarĂĄ la configuraciĂłn a su sistema.\n"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "\t-Hard drive.\n"
+msgstr "\t-Disco rĂ­gido.\n"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
+#, c-format
msgid ""
-"Please choose the\n"
-"media for backup."
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
+"\n"
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
-"Por favor, elija el soporte\n"
-"para la copia de respaldo."
+"Este paso se activa sĂłlo si se encontrĂł una particiĂłn GNU/Linux antigua en\n"
+"su sistema.\n"
+"\n"
+"DrakX ahora necesita saber si desea realizar una instalaciĂłn nueva o una\n"
+"actualizaciĂłn de un sistema Mandrake Linux existente:\n"
+"\n"
+" * \"%s\": Esta opciĂłn borrarĂĄ prĂĄcticamente por completo el sistema\n"
+"anterior. Si desea cambiar la forma en que se particionan sus discos, o\n"
+"cambiar el sistema de archivos, deberĂ­a utilizar esta opciĂłn. Sin embargo,\n"
+"dependiendo de su esquema de particionado, puede evitar que se\n"
+"sobre-escriban algunos datos existentes.\n"
+"\n"
+" * \"%s\": Esta clase de instalaciĂłn le permite actualizar los paquetes que\n"
+"en este momento estĂĄn instalados en su sistema Mandrake Linux. No se\n"
+"alteran las particiones corrientes de sus discos ni los datos de los\n"
+"usuarios. La mayorĂ­a de los otros pasos de configuraciĂłn permanecen\n"
+"disponibles, de manera similar a lo que ocurre con una instalaciĂłn\n"
+"estĂĄndar.\n"
+"\n"
+"El uso de la opciĂłn \"Actualizar\" deberĂ­a funcionar sin problemas para los\n"
+"sistemas Mandrake Linux que corren la versiĂłn \"8.1\" o una posterior. No\n"
+"se recomienda realizar una actualizaciĂłn sobre versiones anteriores a\n"
+"Mandrake Linux versiĂłn \"8.1\"."
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
+#, c-format
+msgid "Printer on remote CUPS server"
+msgstr "Impresora en un servidor CUPS remoto"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the time \n"
-"interval between each backup"
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
msgstr ""
-"Por favor, elija el intervalo de\n"
-" tiempo entre cada copia de respaldo"
+"No se pudo quitar la impresora \"%s\" de Star Office/OpenOffice.org/GIMP."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Use daemon"
-msgstr "Usar servidor"
+msgid "delete"
+msgstr "borrar"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "monthly"
-msgstr "cada mes"
+msgid "here if no."
+msgstr "aquĂ­ si no lo estĂĄ."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "weekly"
-msgstr "cada semana"
+msgid "DHCP host name"
+msgstr "Nombre de la mĂĄquina DHCP"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "daily"
-msgstr "cada dĂ­a"
+msgid "The maximum lease (in seconds)"
+msgstr "El \"lease\" mĂĄximo (en segundos)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "hourly"
-msgstr "cada hora"
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "Seleccione el puerto serie al que estĂĄ conectado el ratĂłn, por favor."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "HardDrive / NFS"
-msgstr "Disco rĂ­gido / NFS"
+msgid "Did it work properly?"
+msgstr "ÂżFuncionĂł adecuadamente?"
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
#, c-format
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
+msgid "Poor"
+msgstr "Pobre"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please enter the directory to save to:"
-msgstr "Por favor, ingrese el directorio donde guardar:"
+msgid "The DHCP start range"
+msgstr "Comienzo del rango de DHCP"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr ""
-"Por favor, marque si desea expulsar su cinta luego de la copia de seguridad."
+msgid "Grenada"
+msgstr "Granada"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr "Por favor, marque si primero desea borrar su cinta."
+msgid "Unsafe"
+msgstr "Inseguro"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "Por favor, marque si desea utilizar un dispositivo que no rebobina."
+msgid ", %s sectors"
+msgstr ", %s sectores"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Please enter the device name to use for backup"
+msgid "No"
+msgstr "No"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
msgstr ""
-"Por favor, ingrese el nombre del dispositivo a utilizar para el respaldo"
+"ÂżSu impresora es un dispositivo multifunciĂłn de HP o Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 con scanner, Sony IJP-V100), una HP "
+"PhotoSmart o una HP LaserJet 2200?"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use tape to backup"
-msgstr "Usar cinta para realizar respaldo"
+msgid "Guadeloupe"
+msgstr "Guadalupe"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "No CD device defined!"
-msgstr "ÂĄNo se definiĂł dispositivo de CD!"
+msgid "could not find any font.\n"
+msgstr "no se pueden encontrar tipografĂ­as.\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Por favor, ingrese el nombre del dispositivo de\n"
-" su grabadora de CD, ej: 0,1,0"
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "ÂżDesea que la tecla BackSpace envĂ­e un Delete en la consola?"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "Por favor, marque si estĂĄ utilizando un dispositivo DVDRAM"
+msgid "Vertical refresh rate"
+msgstr "Frecuencia de barrido vertical"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
#, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "Por favor, marque si estĂĄ utilizando un dispositivo DVDR"
+msgid "Entering step `%s'\n"
+msgstr "Entrando en la etapa '%s'\n"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid " Erase Now "
-msgstr " Borrar Ahora "
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "Por favor, marque si desea borrar su soporte regrabable (1er. sesiĂłn)"
+msgid "Removing %s ..."
+msgstr "Quitando %s ..."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "Por favor, marque si estĂĄ utilizando un soporte CDRW"
+msgid "Niger"
+msgstr "NĂ­ger"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Please check for multisession CD"
-msgstr "Por favor, marque para CD multi-sesiĂłn"
+msgid "No printer"
+msgstr "Sin impresora"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "Por favor, elija el tamaño de su CD/DVD"
+msgid "alert configuration"
+msgstr "configuraciĂłn de alerta"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
-msgstr ""
-"Por favor, elija su dispositivo CD/DVD\n"
-"(Presione Intro para propagar las configuraciones a otros campos.\n"
-"Este campo no es necesario, sĂłlo una herramienta para completar el "
-"formulario.)"
+msgid "NetWare Printer Options"
+msgstr "Opciones de la impresora NetWare"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Use CD/DVDROM to backup"
-msgstr "Usar CD/DVDROM para la copia de respaldo"
+msgid "%s BootSplash (%s) preview"
+msgstr "Bootsplash de %s. No se puede crear la previsualizaciĂłn (%s)"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Need hostname, username and password!"
-msgstr "¥Necesita el nombre del host, el nombre de usuario y la contraseña!"
+msgid "General"
+msgstr "General"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remember this password"
-msgstr "Recordar esta contraseña"
+msgid "Printing system: "
+msgstr "Sistema de impresiĂłn: "
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please enter your password"
-msgstr "Por favor, ingrese su contraseña"
+msgid "Add a user"
+msgstr "Añadir un usuario"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please enter your login"
-msgstr "Por favor, ingrese su nombre de usuario (login)"
+msgid "Network configuration (%d adapters)"
+msgstr "ConfiguraciĂłn de la red (%d adaptadores)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
-msgstr ""
-"Por favor, ingrese el directorio (o mĂłdulo) para\n"
-" poner la copia de respaldo en este host."
+msgid "Mandatory package %s is missing"
+msgstr "Falta el paquete obligatorio %s"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the host name or IP."
-msgstr "Por favor, ingrese el nombre o la IP del host"
+msgid "Philippines"
+msgstr "Filipinas"
-#: ../../standalone/drakbackup:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
#, c-format
-msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
-msgstr ""
-"Otro (no drakbackup)\n"
-"las claves ya estĂĄn en su lugar"
+msgid "Ok"
+msgstr "Aceptar"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Print Queue Name"
+msgstr "Nombre de la cola de impresiĂłn"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "ÂżDesea usar aboot?"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "Bielorruso"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-" Transfer \n"
-"Now"
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
msgstr ""
-"Transferir \n"
-"Ahora"
+"PDQ sĂłlo soporta impresoras locales, impresoras LPD remotas, e impresoras "
+"Socket/TCP.\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Move files to the new partition"
+msgstr "Mover los archivos a la nueva particiĂłn"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
msgstr ""
-"Crear/Transferir\n"
-"claves de respaldo para SSH"
+"Añada aquí los servidores CUPS cuyas impresoras desea usar. Sólo necesita "
+"hacer esto si los servidores no difunden la informaciĂłn de sus impresoras en "
+"la red local."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use Expect for SSH"
-msgstr "Usar Expect para SSH"
+msgid "Restore From Catalog"
+msgstr "Restaurar desde CatĂĄlogo"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Net Method:"
-msgstr "MĂ©todo de red:"
+msgid "Pitcairn"
+msgstr "Pitcairn"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use network connection to backup"
-msgstr "Usar conexiĂłn de red para realizar copia de respaldo"
+msgid "IDE"
+msgstr "IDE"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Users"
-msgstr "Usuarios"
+msgid "group :"
+msgstr "grupo :"
-#: ../../standalone/drakbackup:1
+#: ../../fs.pm:1
#, c-format
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
+msgid "mounting partition %s in directory %s failed"
+msgstr "fallĂł el montaje de la particiĂłn %s en el directorio %s"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr "Usar respaldos incrementales (no reemplazar respaldos antiguos)"
+msgid "Lilo screen"
+msgstr "Pantalla de LiLo"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid "Remove Selected"
-msgstr "Quitar los seleccionados."
+msgid "LILO with graphical menu"
+msgstr "LILO con menĂș grĂĄfico"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Do not include the browser cache"
-msgstr "No incluir el cache del navegador"
+msgid "Estimating"
+msgstr "Estimando"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr ""
-"Por favor, marque a todos los usuarios que desa incluir en la copia de "
-"respaldo"
+msgid "You can't unselect this package. It is already installed"
+msgstr "No puede desmarcar este paquete. Ya estĂĄ instalado"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr ", impresora \"%s\" en el servidor SMB/Windows \"%s\""
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Go on anyway?"
+msgstr "ÂżSeguir adelante?"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Looking for available packages and rebuilding rpm database..."
msgstr ""
-"Con esta opciĂłn podrĂĄ restaurar cualquier versiĂłn de su\n"
-"directorio /etc."
+"Buscando los paquetes disponibles y reconstruyendo la base de datos de RPM..."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "No incluir archivos crĂ­ticos (passwd, group, fstab)"
+msgid "Does not appear to be recordable media!"
+msgstr "ÂĄNo parece ser un soporte grabable!"
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Use incremental backup (do not replace old backups)"
-msgstr "Usar repaldo incremental (no reemplazar respaldos antiguos)"
+msgid "Specify options"
+msgstr "Especificar las opciones"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Respaldar sus archivos del sistema. (directorio /etc)"
+msgid "Vanuatu"
+msgstr "Vanuatu"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Estas opciones pueden respaldar y restaurar todos los archivos en el "
-"directorio /etc.\n"
+msgid "Either the server name or the server's IP must be given!"
+msgstr "ÂĄDebe indicar el nombre o la direcciĂłn IP del servidor!"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
"\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
msgstr ""
+"Un disquete de arranque personalizado da la posibilidad de arrancar su "
+"equipo\n"
+"bajo Linux sin depender del cargador de arranque normal. Esto puede ser "
+"Ăștil\n"
+"si no desea instalar SILO en su sistema, o si cualquier otro sistema "
+"operativo borra\n"
+"SILO, o si SILO no funciona con su configuraciĂłn de hardware. Un disquete\n"
+"de arranque personalizado también se puede usar con la imagen de rescate de\n"
+" Mandrake haciendo asĂ­ mucho mĂĄs fĂĄcil la recuperaciĂłn en caso de fallo\n"
+"grave del sistema.\n"
"\n"
-"Por favor, marque todas las opciones que necesita.\n"
+"Si desea crear un disquete de arranque para su sistema, inserte un disquete\n"
+"en la primer disquetera y presione \"Aceptar\"."
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Seleccione los archivos o directorios y haga clic sobre 'Agregar'"
+msgid "You can't use an encrypted file system for mount point %s"
+msgstr ""
+"No puede usar un sistema de archivos cifrado para el punto de montaje %s"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "File Selection"
-msgstr "SelecciĂłn de archivos."
+msgid "Norfolk Island"
+msgstr "Isla Norfolk"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Can't create catalog!"
-msgstr "ÂĄNo se puede crear catĂĄlogo!"
+msgid "Theme installation failed!"
+msgstr "ÂĄFallĂł la instalaciĂłn de los temas!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid " Error while sending mail. \n"
-msgstr " Error durante el envĂ­o de correo. \n"
+msgid "Nothing to do"
+msgstr "Nada para hacer"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
-"\n"
-"Actividades de Drakbackup por medio de cinta:\n"
-"\n"
+msgid "Use for loopback"
+msgstr "Usar para loopback"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
-"\n"
-"Actividades de Drakbackup por medio de CD:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
+msgstr "Herramienta de Reporte de Errores de Mandrake"
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
-"\n"
-"Actividades de Drakbackup por medio de %s:\n"
-"\n"
+msgid "use pppoe"
+msgstr "usar pppoe"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving files to the new partition"
+msgstr "Moviendo los archivos a la nueva particiĂłn"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s con aceleraciĂłn 3D EXPERIMENTAL por hardware"
+
+#: ../../help.pm:1 ../../interactive.pm:1
+#, c-format
+msgid "Advanced"
+msgstr "Avanzada"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transfer"
+msgstr "Transferir"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak (Sueco)"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-" Problema en la conexiĂłn FTP: No fue posible enviar sus archivos de copia de "
-"respaldo por FTP.\n"
+msgid "More Options"
+msgstr "MĂĄs opciones"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Afghanistan"
+msgstr "AfganistĂĄn"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Delete Hard Drive tar files after backup to other media."
+msgstr "Borrar los archivos tar del disco luego de respaldar a otro soporte."
+
+#: ../../services.pm:1
+#, c-format
msgid ""
-"file list sent by FTP: %s\n"
-" "
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
msgstr ""
-"lista de archivos envĂ­ada por FTP: %s\n"
-" "
+"cron es un programa UNIX estĂĄndar que ejecuta programas especificados por\n"
+"el usuario periódicamente. El cron de Vixie añade varias funcionalidades al "
+"cron de Unix \n"
+"bĂĄsico, incluyendo una mayor seguridad y opciones de configuraciĂłn mĂĄs "
+"potentes."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "No changes to backup!"
-msgstr "ÂĄNo hay cambios para realizar respaldo!"
+msgid "Burundi"
+msgstr "Burundi"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Respaldar archivos del disco rĂ­gido..."
+msgid "Add Client -->"
+msgstr "Añadir cliente -->"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Backup Other files..."
-msgstr "Respaldar otros archivos..."
+msgid "Read carefully!"
+msgstr "ÂĄLea con cuidado!"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "Progreso de respaldo del disco rĂ­gido..."
+msgid "RW"
+msgstr "RW"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Backup User files..."
-msgstr "Respaldar archivos de usuario..."
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
+msgstr ""
+"Por favor,\n"
+"teclee su norma de tv y paĂ­s"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Backup system files..."
-msgstr "Respaldar archivos del sistema..."
+msgid "Port"
+msgstr "Puerto"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "No tape in %s!"
-msgstr "ÂĄNo hay cinta en %s!"
+msgid "No (experts only)"
+msgstr "No (sĂłlo expertos)"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Permission problem accessing CD."
-msgstr "Problema de permisos al acceder al CD."
+msgid "No kernel selected!"
+msgstr "ÂĄNo se seleccionĂł nĂșcleo!"
-#: ../../standalone/drakbackup:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "This may take a moment to erase the media."
-msgstr "Borrar el soporte puede tardar unos momentos."
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Pulse intro para iniciar el SO elegido, pulse 'e' para editar"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Not erasable media!"
-msgstr "ÂĄNo es un soporte borrable!"
+msgid "Set-GID"
+msgstr "Set-GID"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr "ÂĄNo parece ser un soporte grabable!"
+msgid "The encryption keys do not match"
+msgstr "Las claves de cifrado no coinciden"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No CDR/DVDR in drive!"
-msgstr "ÂĄNo hay CDR/DVDR en la unidad!"
+msgid "Right \"Windows\" key"
+msgstr "Tecla \"Windows\" de la derecha"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "WebDAV transfer failed!"
-msgstr "ÂĄFallĂł la transferencia WebDAV!"
+msgid "CDROM / DVDROM"
+msgstr "CDROM / DVDROM"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "WebDAV remote site already in sync!"
-msgstr "ÂĄEl sitio WebDAV remoto ya estĂĄ sincronizado!"
+msgid "if set to yes, check empty password in /etc/shadow."
+msgstr "si se pone en sí, verificar contraseña vacía en /etc/shadow."
-#: ../../standalone/drakbackup:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Total progess"
-msgstr "Progreso total"
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
+msgstr ""
+"Antes de continuar, debería leer cuidadosamente los términos de la\n"
+"licencia. La misma cubre a toda la distribuciĂłn Mandrake Linux. Si estĂĄ de\n"
+"acuerdo con todos los términos en la misma, marque la casilla \"%s\". Si\n"
+"no, simplemente apague su computadora."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
+"Here is a list of the available printing options for the current printer:\n"
"\n"
-"without being prompted for a password."
msgstr ""
-"Transferencia exitosa\n"
-"Puede verificar que se puede conectar al servidor con:\n"
+"AquĂ­ tiene una lista de las opciones disponibles para la impresora actual:\n"
"\n"
-"ssh -i %s %s\\@%s\n"
+
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolutions"
+msgstr "Resoluciones"
+
+#: ../../network/drakfirewall.pm:1
+#, c-format
+msgid ""
+"drakfirewall configurator\n"
"\n"
-"sin que se le pida una contraseña."
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
+msgstr ""
+"configurador de drakfirewall\n"
+"\n"
+"Esto configura un cortafuegos personal para esta mĂĄquina Mandrake Linux.\n"
+"Para una soluciĂłn potente de cortafuegos dedicada, por favor eche un "
+"vistazo\n"
+"a la distribuciĂłn especializada MandrakeSecurity Firewall."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "%s not responding"
-msgstr "%s no responde"
+msgid ""
+"Please enter your username, password and domain name to access this host."
+msgstr ""
+"Por favor, ingrese su nombre de usuario, contraseña y nombre de dominio para "
+"acceder a este host."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Can't find %s on %s"
-msgstr "No puedo encontrar %s en %s"
+msgid "Remove selected host"
+msgstr "Quitar host seleccionado"
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr "Permiso denegado transfiriendo %s a %s"
+msgid "Network configuration"
+msgstr "ConfiguraciĂłn de la red"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Bad password on %s"
-msgstr "Contraseña incorrecta en %s"
+msgid "No sharing"
+msgstr "No compartir"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr "Sin pedido de contraseña en %s en el puerto %s"
+msgid "Move selected rule down one level"
+msgstr "Bajar un nivel la regla seleccionada"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "ERROR: Cannot spawn %s."
-msgstr "ERROR: No se puede lanzar %s."
+msgid "TB"
+msgstr "TB"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr "La generaciĂłn de claves puede tardar unos momentos."
+msgid "Please check if you are using a DVDR device"
+msgstr "Por favor, marque si estĂĄ utilizando un dispositivo DVDR"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
-"%s existe, Âżborrarlo?\n"
-"\n"
-"Advertencia: Si ya realizĂł este proceso probablemente deba\n"
-" purgar la entrada de authorized_keys en el servidor."
+msgid "FATAL"
+msgstr "FATAL"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
"\n"
-" DrakBackup Report Details\n"
-"\n"
+"The network address is %s using a netmask of %s.\n"
"\n"
msgstr ""
+"El servidor DHCP permitirĂĄ a otras computadoras arrancar utilizando PXE en "
+"el rango de direcciones dado.\n"
"\n"
-" Detalles del reporte de DrakBackup\n"
-"\n"
+"La direcciĂłn de red es %s utilizando una mĂĄscara de red de %s.\n"
"\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Delete"
+msgstr "Borrar"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"Allow/Forbid reboot by the console user."
msgstr ""
+"Argumentos: (arg)\n"
"\n"
-" Reporte del servidor DrakBackup\n"
-"\n"
-"\n"
+"Permitir/Prohibir reinicio por parte del usuario de la consola."
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
msgstr ""
-"\n"
-" Reporte de DrakBackup \n"
-"\n"
+"Puede configurar su computadora para que inicie X automĂĄticamente\n"
+"al arrancar. ÂżDesea que se lance X cuando reinicie?"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "INFO"
-msgstr "INFO"
+msgid "Build the disk"
+msgstr "Crear el disquete"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "FATAL"
-msgstr "FATAL"
+msgid "Disconnect %s"
+msgstr "Desconectar %s"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "WARNING"
-msgstr "ATENCIÓN"
+msgid "Status:"
+msgstr "Estado:"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Cron not available yet as non-root"
-msgstr "Cron todavĂ­a no estĂĄ disponible como no-root"
+msgid "HTTP proxy"
+msgstr "Proxy HTTP"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "FallĂł la instalaciĂłn de %s. OcurriĂł el siguiente error:"
+msgid "SSH Server"
+msgstr "Servidor SSH"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No, I don't want autologin"
-msgstr "No, no deseo entrada automĂĄtica"
+msgid "\t-Network by rsync.\n"
+msgstr "\t-Red por rsync.\n"
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "SĂ­, deseo entrada automĂĄtica con este (usuario, escritorio)"
+msgid "European protocol"
+msgstr "Protocolo europeo"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "Lanzar el sistema X-Window al comenzar"
+msgid ", printer \"%s\" on server \"%s\""
+msgstr ", impresora \"%s\" en el servidor \"%s\""
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
#, c-format
-msgid "System mode"
-msgstr "Modo del sistema"
+msgid "Error"
+msgstr "Error"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Bootsplash"
-msgstr "Bootsplash"
+msgid "allow \"su\""
+msgstr "permitir \"su\""
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Lilo screen"
-msgstr "Pantalla de LiLo"
+msgid "Australia"
+msgstr "Australia"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
-"\n"
-"Seleccione un tema para\n"
-"lilo y bootsplash,\n"
-"puede elegirlos\n"
-"por separado"
+msgid "please wait during ttmkfdir..."
+msgstr "por favor, espere mientras corre ttmkfdir..."
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Themes"
-msgstr "Temas"
+msgid "Configure only card \"%s\"%s"
+msgstr "Configurar sĂłlo la tarjeta \"%s\"%s"
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Splash selection"
-msgstr "SelecciĂłn de Splash"
+msgid "Level"
+msgstr "Nivel"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Change the printing system"
+msgstr "Cambiar el sistema de impresiĂłn"
+
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
msgstr ""
-"En este momento estĂĄ usando %s como gestor de arranque.\n"
-"Haga click sobre configurar para lanzar el asistente de configuraciĂłn."
+"Su sistema soporta configuraciĂłn multi-monitor.\n"
+"¿Qué desea hacer?"
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr "InstalaciĂłn satisfactoria de LiLo y temas de Bootsplash"
+msgid "Configure services"
+msgstr "Servicios al inicio"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Theme installation failed!"
-msgstr "ÂĄFallĂł la instalaciĂłn de los temas!"
+msgid "Broadcast Address:"
+msgstr "DirecciĂłn de difusiĂłn:"
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Notice"
-msgstr "Nota"
+msgid "mount failed: "
+msgstr "mount fallĂł: "
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid ""
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
+msgstr ""
+"El nĂșcleo GNU/Linux necesita correr un lazo de cĂĄlculo al arrancar para "
+"inicializar un contador. El resultado se almacena como bogomips como una "
+"manera de hacer un \"benchmark\" de la CPU."
+
+#: ../../any.pm:1
#, c-format
-msgid "Relaunch 'lilo'"
-msgstr "Volver a ejecutar 'lilo'"
+msgid "Image"
+msgstr "Imagen"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
msgstr ""
-"ÂĄNo se puede volver a iniciar LiLo!\n"
-"Ejecute \"lilo\" como root en la lĂ­nea de comandos para completar la "
-"instalaciĂłn del tema de LiLo."
+"No se pudo agregar la impresora \"%s\" a Star Office/OpenOffice.org/GIMP."
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
-msgstr "Construir initrd mkinitrd -f /boot/initrd-%s.img %s."
+msgid "Remote Administration"
+msgstr "AdministraciĂłn remota"
-#: ../../standalone/drakboot:1
+#: ../../modules.pm:1
#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr "No se puede ejecutar mkinitrd -f /boot/initrd-%s.img %s."
+msgid ""
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+msgstr ""
+"El soporte PCMCIA no existe en los nĂșcleos 2.2. Por favor, utilice un nĂșcleo "
+"2.4."
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+msgid "Selected All"
+msgstr "Seleccionar todas."
+
+#: ../../printer/data.pm:1
+#, c-format
+msgid "CUPS - Common Unix Printing System"
msgstr ""
-"No se puede escribir /etc/sysconfig/bootsplash\n"
-"No se encuentra el archivo."
+"CUPS - Common Unix Printing System (Sistema de impresiĂłn comĂșn de Unix)"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Write %s"
-msgstr "Escribir %s"
+msgid "Webmin Service"
+msgstr "Servicio Webmin"
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr "No se puede escribir /etc/sysconfig/bootsplash."
+msgid "device"
+msgstr "dispositivo"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Lilo message not found"
-msgstr "no se encuentra el mensaje de LiLo"
+msgid "All"
+msgstr "Todo"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Copy %s to %s"
-msgstr "Copiar %s a %s"
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "¿Qué sistema de impresión (spooler) desea usar?"
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Backup %s to %s.old"
-msgstr "Copiar %s a %s.old"
+msgid "Greece"
+msgstr "Grecia"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Create new theme"
-msgstr "Crear un tema nuevo"
+msgid "An error occurred"
+msgstr "OcurriĂł un error"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
-"Display theme\n"
-"under console"
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
msgstr ""
-"Mostrar tema\n"
-"bajo la consola"
-
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "Install themes"
-msgstr "Instalar temas"
+"Se debe actualizar este paquete\n"
+"ÂżEstĂĄ seguro que quiere desmarcarlo?"
-#: ../../standalone/drakboot:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Lilo/grub mode"
-msgstr "Modo de Lilo/Grub"
+msgid "Tamil (Typewriter-layout)"
+msgstr "Tamil (disposiciĂłn de mĂĄquina de escribir)"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Yaboot mode"
-msgstr "Modo de Yaboot"
+msgid "manual"
+msgstr "manual"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "<control>Q"
-msgstr "<control>S"
+msgid "Printer manufacturer, model, driver"
+msgstr "Fabricante de la impresora, modelo, controlador"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "/File/_Quit"
-msgstr "/Archivo/_Salir"
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"No hay soporte alguno, o estĂĄ protegido contra escritura, en el dispositivo %"
+"s.\n"
+"Por favor, inserte uno."
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "/_File"
-msgstr "/_Archivo"
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
+msgstr ""
+"El directorio %s ya tiene algunos datos\n"
+"(%s)"
-#: ../../standalone/drakboot:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Boot Style Configuration"
-msgstr "ConfiguraciĂłn del estilo de arranque"
+msgid "Printer on NetWare server"
+msgstr "Impresora en un servidor NetWare"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "No browser available! Please install one"
-msgstr "ÂĄNo hay un navegador disponible! Por favor, instale uno"
+msgid "Give the ram size in MB"
+msgstr "Proporcione el tamaño de la RAM en MB"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "connecting to Bugzilla wizard ..."
-msgstr "conectando con el asistente Bugzilla..."
+msgid "Real name"
+msgstr "Nombre y apellidos"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Package not installed"
-msgstr "Paquete no instalado"
+msgid "done"
+msgstr "hecho"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Not installed"
-msgstr "No instalado"
+msgid "Please uncheck or remove it on next time."
+msgstr "Por favor, desmarque o quĂ­telo la prĂłxima vez."
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Standalone Tools"
-msgstr "Herramientas 'standalone'"
+msgid "Higher"
+msgstr "MĂĄs alta"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Report"
-msgstr "Reporte"
+msgid "Choose the partitions you want to format"
+msgstr "Elija las particiones que desea formatear"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
+"\n"
"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
+"No se detectĂł tarjeta de TV en su mĂĄquina. Por favor, verifique que tiene "
+"conectada correctamente una tarjeta de vĂ­deo/TV soportada por Linux.\n"
"\n"
"\n"
-"Para enviar un reporte de errores, haga clic sobre el botĂłn Reporte.\n"
-"Esto abrirĂĄ una ventana del navegador web en https://drakbug.mandrakesoft."
-"com\n"
-"donde encontrarĂĄ un formulario para completar. La informaciĂłn que se\n"
-"muestra arriba serĂĄ transferida a ese servidor\n"
+"Puede visitar nuestra base de datos de hardware en:\n"
"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Release: "
-msgstr "VersiĂłn:"
+msgid "Can't find %s on %s"
+msgstr "No puedo encontrar %s en %s"
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Kernel:"
-msgstr "NĂșcleo:"
+msgid "Japanese 106 keys"
+msgstr "Japonés de 106 teclas"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Package: "
-msgstr "Paquete:"
+msgid "This will take a few minutes."
+msgstr "Esto tomarĂĄ algunos minutos."
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Application:"
-msgstr "AplicaciĂłn:"
+msgid "Burkina Faso"
+msgstr "Burkina Faso"
-#: ../../standalone/drakbug:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Configuration Wizards"
-msgstr "Asistentes de configuraciĂłn"
+msgid "Use scanners on remote computers"
+msgstr "Usar los escĂĄneres en computadoras remotas"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
+msgid "Delete selected rule"
+msgstr "Borrar la regla seleccionada"
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Windows Migration tool"
-msgstr "Herramienta para migrar desde Windows"
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Accediendo impresoras en servidores CUPS remotos"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
+msgid "Insert a floppy in %s"
+msgstr "Inserte un disquete en %s"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Software Manager"
-msgstr "Administrador de software"
+msgid "Maldives"
+msgstr "Maldivas"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Remote Control"
-msgstr "Control remoto"
+msgid "compact"
+msgstr "compacto"
-#: ../../standalone/drakbug:1
+#: ../../common.pm:1
#, c-format
-msgid "Msec"
-msgstr "Msec"
+msgid "1 minute"
+msgstr "1 minuto"
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
+msgid "on channel %d id %d\n"
+msgstr "en el canal %d id %d\n"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Mandrake Online"
-msgstr "Mandrake Online"
+msgid ", multi-function device"
+msgstr ", dispositivo multifunciĂłn"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
+msgid "Laos"
+msgstr "Laos"
-#: ../../standalone/drakbug:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Synchronization tool"
-msgstr "Herramienta de sincronizaciĂłn"
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr ""
+"No hay particiones FAT para redimensionar (o no queda espacio suficiente)"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "First Time Wizard"
-msgstr "Aisstente Inicial"
+msgid "Up"
+msgstr "Subir"
-#: ../../standalone/drakbug:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mandrake Control Center"
-msgstr "Centro de control de Mandrake"
+msgid "Firewall"
+msgstr "Cortafuegos"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Mandrake Bug Report Tool"
-msgstr "Herramienta de Reporte de Errores de Mandrake"
+msgid "Area:"
+msgstr "Área:"
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Parameters"
-msgstr "ParĂĄmetros"
+msgid "(E)IDE/ATA controllers"
+msgstr "Controladores (E)IDE/ATA"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Configuration"
-msgstr "ConfiguraciĂłn de la conexiĂłn a Internet"
+msgid "Printer Server"
+msgstr "Servidor de impresiĂłn"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "DHCP Client"
-msgstr "Cliente DHCP"
+msgid "Disconnection from the Internet complete."
+msgstr "DesconexiĂłn desde la Internet completa."
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ethernet Card"
-msgstr "Tarjeta ethernet"
+msgid "Custom configuration"
+msgstr "ConfiguraciĂłn personalizada"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Gateway"
-msgstr "Pasarela"
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
+"Por favor, indique donde estarĂĄ disponible la imagen de instalaciĂłn.\n"
+"\n"
+"Si no tiene un directorio existente, por favor copie el contenido del CD o "
+"del DVD.\n"
+"\n"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connection type: "
-msgstr "Tipo de conexiĂłn: "
+msgid "Saint Pierre and Miquelon"
+msgstr "Saint Pierre y Miquelon"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Profile: "
-msgstr "Perfil: "
+msgid ""
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
+msgstr ""
+"\n"
+"Problemas durante la restauraciĂłn:\n"
+"\n"
+"Durante el paso de restauraciĂłn, Drakbackup verificarĂĄ todos los\n"
+"archivos de respaldo antes de restaurarlos.\n"
+"Antes de la restuaraciĂłn, Drakbackup quitarĂĄ el\n"
+"directorio original, y perderĂĄ todos los datos en el mismo.\n"
+"Es importante ser cuidadoso y no modificar los archivos de\n"
+"datos de respaldo a mano.\n"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Internet connection configuration"
-msgstr "ConfiguraciĂłn de la conexiĂłn a Internet"
+msgid "saving Bootsplash theme..."
+msgstr "guardando tema de Bootsplash..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"No tiene ninguna conexiĂłn a Internet.\n"
-"Primero debe crear una haciendo clic sobre 'Configurar'"
+msgid "Portugal"
+msgstr "Portugal"
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"TodavĂ­a no se ha configurado esta interfaz.\n"
-"Lance el asistente de configuraciĂłn en la ventana principal"
+msgid "Do you have another one?"
+msgstr "ÂżTiene alguna otra?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "activate now"
-msgstr "activar ahora"
+msgid ", printing to %s"
+msgstr ", imprimiendo en %s"
-#: ../../standalone/drakconnect:1
+#: ../../network/network.pm:1
#, c-format
-msgid "deactivate now"
-msgstr "desactivar ahora"
+msgid "Assign host name from DHCP address"
+msgstr "Asignar nombre de mĂĄquina desde direcciĂłn DHCP"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DHCP client"
-msgstr "cliente DHCP"
+msgid "Toggle to normal mode"
+msgstr "Cambiar al modo normal"
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Started on boot"
-msgstr "Iniciado al arranque"
+msgid "Generic"
+msgstr "Genérico"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Protocol"
-msgstr "Protocolo de arranque"
+msgid "Cylinder %d to %d\n"
+msgstr "Cilindros %d a %d\n"
#: ../../standalone/drakconnect:1
#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptador %s: %s"
+msgid "New profile..."
+msgstr "Nuevo perfil..."
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LAN Configuration"
-msgstr "ConfiguraciĂłn LAN"
+msgid "Which disk do you want to move it to?"
+msgstr "¿A qué disco desea desplazarla?"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "LAN configuration"
-msgstr "ConfiguraciĂłn de la red local"
+msgid "Display logo on Console"
+msgstr "Mostrar logo en la consola"
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"No tiene configurada ninguna interfaz.\n"
-"Configure la primera haciendo clic sobre 'Configurar'"
+msgid "Windows Domain"
+msgstr "Dominio Windows"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Connect..."
-msgstr "Conectar..."
+msgid "Interface %s (on network %s)"
+msgstr "Interfaz %s (en la red %s)"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Disconnect..."
-msgstr "Desconectar..."
+msgid "INFO"
+msgstr "INFO"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not connected"
-msgstr "No conectado"
+msgid "Wallis and Futuna"
+msgstr "Wallis y Futuna"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Connected"
-msgstr "Conectado"
+msgid "Need to create /etc/dhcpd.conf first!"
+msgstr "ÂĄPrimero debe crear /etc/dhcpd.conf!"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Is FPU present"
+msgstr "FPU estĂĄ presente"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "There are no scanners found which are available on your system.\n"
+msgstr "No se encontraron escĂĄneres disponibles en su sistema.\n"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
+"No additional information\n"
+"about this service, sorry."
msgstr ""
-"AtenciĂłn, se ha detectado otra conexiĂłn con la Internet, tal vez estĂĄ usando "
-"su red"
+"No hay informaciĂłn adicional para\n"
+"este servicio. Disculpe."
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Interface:"
-msgstr "Interfaz:"
+msgid "Build Single NIC -->"
+msgstr "Construir NIC Ășnica -->"
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Gateway:"
-msgstr "Pasarela:"
+msgid "Is this correct?"
+msgstr "ÂżEs correcto?"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Apply"
-msgstr "Aplicar"
+msgid "Marshall Islands"
+msgstr "Islas Marshall"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Click here to launch the wizard ->"
-msgstr "Haga clic aquĂ­ para lanzar el asistente ->"
+msgid "Windows (FAT32)"
+msgstr "Windows (FAT32)"
-#: ../../standalone/drakconnect:1
+#: ../../steps.pm:1
#, c-format
-msgid "Wizard..."
-msgstr "Asistente..."
+msgid "Root password"
+msgstr "Contraseña de root"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Status:"
-msgstr "Estado:"
+msgid "Build All Kernels -->"
+msgstr "Construir todos los nĂșcleos -->"
-#: ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Type:"
-msgstr "Tipo:"
+msgid "if set to yes, report unowned files."
+msgstr "si se pone en sí, reportar archivos sin dueño."
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Internet access"
-msgstr "Acceso a Internet"
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"No dispone de una particiĂłn de intercambio\n"
+"\n"
+"ÂżDesea continuar de todas formas?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hostname: "
-msgstr "Nombre de la mĂĄquina: "
+msgid "Server IP missing!"
+msgstr "ÂĄFalta la IP del servidor!"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Configurar la red de ĂĄrea local..."
+msgid "Suriname"
+msgstr "Surinam"
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "State"
-msgstr "Estado"
+msgid "Enable ACPI"
+msgstr "Habilitar ACPI"
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "Driver"
-msgstr "Controlador"
+msgid "Graphical Environment"
+msgstr "Entorno grĂĄfico"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Protocol"
-msgstr "Protocolo"
+msgid "Gibraltar"
+msgstr "Gibraltar"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Interface"
-msgstr "Interfaz"
+msgid "on Tape Device"
+msgstr "en Dispositivo de Cinta"
-#: ../../standalone/drakconnect:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Configure Internet Access..."
-msgstr "Configurar el acceso a Internet..."
+msgid "Do nothing"
+msgstr "Hacer nada"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Wait please"
-msgstr "Por favor, espere"
+msgid "Delete Client"
+msgstr "Borrar cliente"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Nombre del perfil a crear (el perfil nuevo se crea como copia del actual):"
+msgid "Filesystem type: "
+msgstr "Tipo de sistema de. archivos: "
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New profile..."
-msgstr "Nuevo perfil..."
+msgid "Starting network..."
+msgstr "Iniciando la red ..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Profile to delete:"
-msgstr "Perfil a borrar:"
+msgid "Vietnam"
+msgstr "Vietnam"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Del profile..."
-msgstr "Borrar perfil..."
+msgid "/_Fields description"
+msgstr "/_DescripciĂłn de los campos"
-#: ../../standalone/drakconnect:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "ConfiguraciĂłn de la red (%d adaptadores)"
+msgid "Optimize your security by using Mandrake Linux"
+msgstr "Optimice su seguridad"
-#: ../../standalone/drakedm:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
-"El administrador de conexiĂłn X11 le permite conectarse grĂĄficamente\n"
-"a su sistema con el X Window System corriendo y soporta correr varias\n"
-"sesiones X diferentes en su mĂĄquina local a la vez."
+msgid "Help"
+msgstr "Ayuda"
-#: ../../standalone/drakedm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Choosing a display manager"
-msgstr "Eligiendo un administrador de conexiĂłn"
+msgid "Your personal phone number"
+msgstr "Su nĂșmero de telĂ©fono personal"
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Which size do you want to keep for Windows on"
+msgstr "¿Qué tamaño desea conservar para Windows en la"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
msgstr ""
-"No se puede cerrar mkbootdisk adecuadamente: \n"
-" %s \n"
-" %s"
+"La(s) pĂĄgina(s) de prueba se enviaron al demonio de impresiĂłn.\n"
+"Puede que pase algo de tiempo antes de que comience la impresiĂłn.\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unable to fork: %s"
-msgstr "No se puede hacer fork: %s"
+msgid "Username required"
+msgstr "Se necesita nombre de usuario"
-#: ../../standalone/drakfloppy:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
msgstr ""
-"No hay soporte alguno, o estĂĄ protegido contra escritura, en el dispositivo %"
-"s.\n"
-"Por favor, inserte uno."
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "AsegĂșrese que hay un soporte para el dispositivo %s"
+"Dependiendo del idioma predeterminado que eligiĂł en , DrakX selecciona\n"
+"automĂĄticamente un tipo particular de configuraciĂłn del teclado. Sin\n"
+"embargo, podrĂ­a no tener un teclado que se corresponde exactamente con su\n"
+"idioma: por ejemplo, si Usted es un argentino que habla inglés, todavía\n"
+"podría desear que su teclado sea un teclado inglés. O si habla castellano\n"
+"pero estĂĄ en Inglaterra puede estar en la misma situaciĂłn en la cual su\n"
+"idioma nativo y su teclado no coinciden. En cualquier caso, este paso de\n"
+"instalaciĂłn le permitirĂĄ elegir un teclado apropiado de una lista.\n"
+"\n"
+"Haga clic sobre el botĂłn \"%s\" para que se le presente la lista completa\n"
+"de los teclados soportados.\n"
+"\n"
+"Si eligiĂł una distribuciĂłn de teclado basada en un alfabeto no latino, el\n"
+"prĂłximo diĂĄlogo le permitirĂĄ elegir la combinaciĂłn de teclas que cambiarĂĄ\n"
+"la distribuciĂłn del teclado entre la latina y la no latina."
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build the disk"
-msgstr "Crear el disquete"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "Opciones de la impresora SMB (Windows 9x/NT)"
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Output"
-msgstr "Salida"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
+"Argumentos: (arg)\n"
+"\n"
+"Aceptar/Rechazar mensajes de error IPv4 simulados."
#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Remove a module"
-msgstr "Quitar un mĂłdulo"
+msgid "mkinitrd optional arguments"
+msgstr "argumentos opcionales para mkinitrd"
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Add a module"
-msgstr "Agregar un mĂłdulo"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
+"Navegue la web con Mozilla o Konqueror, lea su correo electrĂłnico con "
+"Evolution o KMail, cree sus documentos con OpenOffice.org."
-#: ../../standalone/drakfloppy:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "omit scsi modules"
-msgstr "omitir mĂłdulos scsi"
+msgid "Protocol for the rest of the world"
+msgstr "Protocolo para el resto del mundo"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "if needed"
-msgstr "si es necesario"
+msgid "Print test pages"
+msgstr "Imprimir la(s) pĂĄgina(s) de prueba"
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "omit raid modules"
-msgstr "omitir mĂłdulos raid"
+msgid "64 MB or more"
+msgstr "64 MB o mĂĄs"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "force"
-msgstr "forzar"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
+"Por favor, seleccione las pĂĄginas de prueba que quiere imprimir.\n"
+"Nota: la pĂĄgina de prueba de foto puede tardar mucho tiempo en ser impresa e "
+"incluso en impresoras lĂĄser con muy poca memoria puede que no salga. En la "
+"mayorĂ­a de los casos, basta con imprimir la pĂĄgina de prueba estĂĄndar."
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "mkinitrd optional arguments"
-msgstr "argumentos opcionales para mkinitrd"
+msgid "Please select the device where your %s is attached"
+msgstr "Por favor, seleccione el dispositivo donde estĂĄ conectado su %s"
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Expert Area"
-msgstr "Área experta"
+msgid "Not formatted\n"
+msgstr "No formateado\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "kernel version"
-msgstr "versiĂłn del nĂșcleo"
+msgid "Periodic Checks"
+msgstr "Verificaciones periĂłdicas"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "default"
-msgstr "predeterminado"
+msgid "PXE Server Configuration"
+msgstr "ConfiguraciĂłn del servidor PXE"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "General"
-msgstr "General"
+msgid "Backup the system files before:"
+msgstr "Respaldar los archivos del sistema anteriores a:"
-#: ../../standalone/drakfloppy:1
+#: ../../security/level.pm:1
#, c-format
-msgid "boot disk creation"
-msgstr "Creado de disquetes que arrancan"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"Éste es el nivel de seguridad estándar recomendado para una máquina que se\n"
+"utilizarĂĄ para conectarse a la Internet como cliente."
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "First floppy drive"
+msgstr "Primera disquetera"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Size"
-msgstr "Tamaño"
+msgid "/File/_Quit"
+msgstr "/Archivo/_Salir"
-#: ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Module name"
-msgstr "Nombre del mĂłdulo"
+msgid "Dvorak"
+msgstr "Dvorak"
-#: ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Post Uninstall"
-msgstr "Post-desinstalaciĂłn"
+msgid "Choose the new size"
+msgstr "Eligiendo el tamaño nuevo"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Remove fonts on your system"
-msgstr "Quitar tipografĂ­as de su sistema"
+msgid "Media class"
+msgstr "Clase de soporte"
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Initial tests"
-msgstr "Pruebas iniciales"
+msgid "The %s is not known by this version of Scannerdrake."
+msgstr "Esta versiĂłn de Scannerdrake deconoce al %s."
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Post Install"
-msgstr "Post-instalaciĂłn"
+msgid "Faroe Islands"
+msgstr "Islas Feroe"
#: ../../standalone/drakfont:1
#, c-format
-msgid "Install & convert Fonts"
-msgstr "Instalar y convertir tipografĂ­as"
+msgid "Restart XFS"
+msgstr "Reiniciar XFS"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Copy fonts on your system"
-msgstr "Copiar tipografĂ­as en su sistema"
+msgid "Add host/network"
+msgstr "Añadir host/red"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Remove List"
-msgstr "Quitar lista"
+msgid ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
+msgstr ""
+"si se pone en sí, verificar contraseña vacía, sin contraseña en /etc/shadow "
+"y por usuarios con el id 0 que no sean root."
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Selected All"
-msgstr "Seleccionar todas."
+msgid "Please enter the directory to save to:"
+msgstr "Por favor, ingrese el directorio donde guardar:"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Unselected All"
-msgstr "Deseleccionar todas."
+msgid "Model name"
+msgstr "Nombre del modelo"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "here if no."
-msgstr "aquĂ­ si no lo estĂĄ."
+msgid "Albania"
+msgstr "Albania"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "click here if you are sure."
-msgstr "haga clic aquĂ­ si estĂĄ seguro."
+msgid "No CDR/DVDR in drive!"
+msgstr "ÂĄNo hay CDR/DVDR en la unidad!"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Install List"
-msgstr "Instalar lista"
+msgid "British Indian Ocean Territory"
+msgstr "Territorio BritĂĄnico del OcĂ©ano Índico"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-"Seleccione el archivo o directorio de tipografĂ­as y haga clic sobre 'Agregar'"
+msgid "Normal Mode"
+msgstr "Modo normal"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
+"Please be sure that the cron daemon is included in your services. \n"
"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-"Antes de instalar cualquier tipografĂ­a, asegĂșrese que tiene derecho de "
-"usarlas\n"
-"e instalarlas en su sistema.\n"
+"Por favor, asegĂșrese que el servidor cron estĂĄ incluĂ­do entre sus "
+"servicios.\n"
"\n"
-"-Puede instalar las tipografĂ­as usando la manera normal. En casos raros,\n"
-"puede ser que tipografĂ­as \"falsas\" congelen a su servidor X."
+"Note que, por ahora, todos los soportes de \"red\" también utilizan el disco."
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generic Printers"
-msgstr "Impresoras genéricas"
+msgid "Printer connection type"
+msgstr "Tipo de conexiĂłn de la impresora"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Abiword"
-msgstr "Abiword"
+msgid "No network adapter on your system!"
+msgstr "ÂĄNo hay ningĂșn adaptador de red en su sistema!"
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
+msgid "Network %s"
+msgstr "Red %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
+msgid "Malayalam"
+msgstr "Malayo"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Elija las aplicaciones que soportarĂĄn las tipografĂ­as:"
+msgid "Option %s out of range!"
+msgstr "ÂĄLa opciĂłn %s estĂĄ fuera de rango"
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
-"\n"
-" Copyright (C) 2001-2002 por MandrakeSoft \n"
-"\tDUPONT Sebastien (versiĂłn original)\n"
-" CHAUMETTE Damien dchaumette\\@mandrakesoft.com\n"
-"\n"
-" Este programa es software libre; lo puede redistribuir y/o modificar\n"
-" bajo los tĂ©rminos de la Licencia PĂșblica General GNU publicada por la\n"
-" Free Software Foundation; ya sea la versiĂłn 2, o (a su elecciĂłn)\n"
-" cualquier versiĂłn posterior.\n"
-"\n"
-" Este programa se distribuye con la esperanza que resultarĂĄ Ăștil, pero\n"
-" SIN GARANTÍA ALGUNA; incluso sin la garantía implícita de COMERCIABILIDAD\n"
-" o ADECUABILIDAD PARA UN PROPÓSITO PARTICULAR. Vea la Licencia PĂșblica\n"
-" General GNU para mĂĄs detalles.\n"
-"\n"
-" DeberĂ­a haber recibido una copia de la Licencia PĂșblica General GNU junto\n"
-" con este programa; de no ser asĂ­, escriba a la Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-" Gracias:\n"
-" - pfm2afm: \n"
-"\t por Ken Borgendale:\n"
-"\t Convertir un archivo .pfm de Windows a uno .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t por James Macnicol: \n"
-"\t type1inst genera archivos fonts.dir fonts.scale y Fontmap.\n"
-" - ttf2pt1: \n"
-"\t por Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convertir archivos de tipografĂ­as ttf a tipografĂ­as afm y pfb\n"
-"\n"
-"\n"
+msgid "Connect %s"
+msgstr "Conectar %s"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "About"
-msgstr "Acerca de"
+msgid "Restarting CUPS..."
+msgstr "Reiniciando CUPS..."
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Font List"
-msgstr "Lista de tipografĂ­as"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "Tarjetas de Impresora/Escaner/Foto en \"%s\""
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Advanced Options"
-msgstr "Opciones avanzadas"
+msgid "Duplicate mount point %s"
+msgstr "Punto de montaje %s duplicado"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Uninstall Fonts"
-msgstr "Desinstalar tipografĂ­as"
+msgid "if set to yes, run chkrootkit checks."
+msgstr "si se pone en sĂ­, ejecutar verificaciones chkrootkit."
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Get Windows Fonts"
-msgstr "Obtener tipografĂ­as de Windows"
+msgid "Connection Configuration"
+msgstr "ConfiguraciĂłn de la conexiĂłn"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Import Fonts"
-msgstr "ImportaciĂłn de tipografĂ­as"
+msgid "Unknown|Generic"
+msgstr "Desconocido|Genérico"
-#: ../../standalone/drakfont:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "done"
-msgstr "hecho"
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
+msgstr ""
+"Es probable que cuando instale Mandrake Linux algunos paquetes se hayan\n"
+"actualizado desde la publicaciĂłn inicial. Se pueden haber corregido algunos\n"
+"errores y solucionado problemas de seguridad. Para permitir que Usted se\n"
+"beneficie de estas actualizaciones, ahora se le propone transferirlas desde\n"
+"la Internet. Marque \"%s\" si tiene funcionando una conexiĂłn con la\n"
+"Internet, o \"%s\" si prefiere instalar los paquetes actualizados mĂĄs\n"
+"tarde.\n"
+"\n"
+"Si elige \"%s\" se mostrarĂĄ una lista de lugares desde los que se pueden\n"
+"obtener las actualizaciones. Elija el mĂĄs cercano a Usted. Luego aparece un\n"
+"ĂĄrbol de selecciĂłn de paquetes: revise la selecciĂłn y presione \"%s\" para\n"
+"transferir e instalar los paquetes seleccionados, o \"%s\" para abortar."
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "xfs restart"
-msgstr "Reiniciar XFS"
+msgid "Quit"
+msgstr "Salir"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Suppress Fonts Files"
-msgstr "Suprimir archivos de tipografĂ­as"
+msgid "Myanmar"
+msgstr "Myanmar"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Restart XFS"
-msgstr "Reiniciar XFS"
+msgid "Auto allocate"
+msgstr "AsignaciĂłn automĂĄtica"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Suppress Temporary Files"
-msgstr "Suprimir archivos temporales"
+msgid "Check bad blocks?"
+msgstr "ÂżVerificar el disco en busca de bloques malos?"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "type1inst building"
-msgstr "Construyendo Type1"
+msgid "Other MultiMedia devices"
+msgstr "Otros dispositivos multimedios"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "pfm fonts conversion"
-msgstr "ConversiĂłn de tipografĂ­as PFM"
+msgid "No remote machines"
+msgstr "Ninguna mĂĄquina remota"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "ttf fonts conversion"
-msgstr "ConversiĂłn de tipografĂ­as TTF"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"Bienvenido al Asistente de configuraciĂłn de Impresoras\n"
+"\n"
+"Este asistente lo ayudarĂĄ a instalar sus impresoras conectadas a esta "
+"computadora.\n"
+"\n"
+"Si tiene impresoras conectadas a esta måquina, por favor enciéndalas para "
+"que se puedan detectar automĂĄticamnte.\n"
+"\n"
+"Haga clic sobre \"Siguiente\" cuando esté listo, o sobre \"Cancelar\" si "
+"Usted no desea configurar sus impresoras ahora."
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Ghostscript referencing"
-msgstr "Referenciando a Ghostscript"
+msgid "Authentication NIS"
+msgstr "AutentificaciĂłn NIS"
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Fonts conversion"
-msgstr "ConversiĂłn de tipografĂ­as"
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr ""
+"La opciĂłn \"Restringir las opciones de la lĂ­nea de comandos\"\n"
+"no tiene sentido sin contraseña"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "True Type install done"
-msgstr "InstalaciĂłn de True Type realizada"
+msgid "Internet Connection Sharing currently enabled"
+msgstr "Ahora, la conexiĂłn compartida a Internet estĂĄ activada ahora"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "por favor, espere mientras corre ttmkfdir..."
+msgid "Card IO_0"
+msgstr "E/S_0 de la tarjeta"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "True Type fonts installation"
-msgstr "InstalaciĂłn de tipografĂ­as True Type"
+msgid "United Arab Emirates"
+msgstr "Emiratos Árabes Unidos"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Fonts copy"
-msgstr "Copiar tipografĂ­as"
+msgid "Card IO_1"
+msgstr "E/S_1 de la tarjeta"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Search for fonts in installed list"
-msgstr "Buscar tipografĂ­as en la lista de instaladas"
+msgid "Thailand"
+msgstr "Tailandia"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "could not find any font.\n"
-msgstr "no se pueden encontrar tipografĂ­as.\n"
+msgid "Routers:"
+msgstr "Routers:"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Reselect correct fonts"
-msgstr "Volver a seleccionar tipografĂ­as correctas"
+msgid "Kazakhstan"
+msgstr "KazajstĂĄn"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr "no se pueden encontrar tipografĂ­as en las particiones montadas"
+msgid "Display all available remote CUPS printers"
+msgstr "Mostrar todas las impresoras CUPS remotas"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_newt.pm:1
#, c-format
-msgid "no fonts found"
-msgstr "no se encontraron tipografĂ­as"
+msgid "Mandrake Linux Installation %s"
+msgstr "InstalaciĂłn %s de Mandrake Linux"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "parse all fonts"
-msgstr "analizar todas las tipografĂ­as"
+msgid "Thai keyboard"
+msgstr "Teclado tailandés"
-#: ../../standalone/drakfont:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Unselect fonts installed"
-msgstr "Desmarcar las tipografĂ­as instaladas"
+msgid "Dialup options"
+msgstr "Opciones de llamada por mĂłdem"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Search installed fonts"
-msgstr "Buscar tipografĂ­as instaladas"
+msgid "Bouvet Island"
+msgstr "Isla Bouvet"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "If no port is given, 631 will be taken as default."
+msgstr "Si no se proporciona un puerto, se tomarĂĄ 631 como predeterminado."
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
+"Change your Cd-Rom!\n"
"\n"
-"Click on Configure to launch the setup wizard."
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
-"ÂĄBienvenido a la herramienta para compartir la conexiĂłn a Internet!\n"
-"\n"
-"%s\n"
+"ÂĄCambie su CD-ROM!\n"
"\n"
-"Haga click sobre Configurar para lanzar el asistente de configuraciĂłn."
+"Inserte el CD-ROM etiquetado como \"%s\" en la unidad y pulse Aceptar cuando "
+"lo haya hecho.\n"
+"Si no lo posee, pulse Cancelar para cancelar la instalaciĂłn desde este CD-"
+"ROM."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "ConfiguraciĂłn de la conexiĂłn compartida a Internet"
+msgid "Polish"
+msgstr "Polaco"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "No se ha configurado la conexiĂłn compartida a Internet."
+msgid "Mandrake Online"
+msgstr "Mandrake Online"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "La configuraciĂłn ya se ha hecho, y ahora estĂĄ activada."
+msgid "\t-Network by webdav.\n"
+msgstr "\t-Red por webdav.\n"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "La configuraciĂłn ya se ha hecho, pero ahora estĂĄ desactivada."
+msgid ""
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
+msgstr ""
+"No se ha detectado ningĂșn adaptador de red en su sistema. Por favor, ejecute "
+"la herramienta de configuraciĂłn del hardware."
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Se ha configurado todo.\n"
-"Ahora puede compartir su conexiĂłn a Internet con otros ordenadores de su red "
-"de ĂĄrea local, usando la configuraciĂłn automĂĄtica de la red (DHCP)."
+msgid "Netmask"
+msgstr "MĂĄscara de red"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemas al instalar el paquete %s"
+msgid "No hard drives found"
+msgstr "ÂĄNo se encontraron discos rĂ­gidos!"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Configurando los scripts, instalando el software, iniciando los servidores..."
+msgid "Logitech CC Series"
+msgstr "Logitech CC Series"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring..."
-msgstr "Configurando..."
+msgid "2 buttons"
+msgstr "2 botones"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"ÂĄSe encontrĂł un conflicto potencial de direcciones LAN en la configuraciĂłn "
-"de %s!\n"
+msgid "What kind is your ISDN connection?"
+msgstr "¿De qué tipo es su conexión RDSI?"
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "La red local no finalizĂł con `.0', saliendo."
+msgid "Label"
+msgstr "Etiqueta"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "Volver a configurar la interfaz y el servidor DHCP"
+msgid "Save on floppy"
+msgstr "Guardar en un disquete"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr "El \"lease\" mĂĄximo (en segundos)"
+msgid "Printer auto-detection"
+msgstr "DetecciĂłn automĂĄtica de impresoras"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The default lease (in seconds)"
-msgstr "El \"lease\" predeterminado (en segundos)"
+msgid "Which of the following is your ISDN card?"
+msgstr "ÂżCuĂĄl de las siguientes es su tarjeta RDSI?"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
-msgid "The DHCP end range"
-msgstr "Fin del rango de DHCP"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
+msgstr ""
+"NFS es un protocolo muy popular para compartir archivos en redes TCP/IP.\n"
+"Este servicio proporciona la funcionalidad de servidor NFS, que se "
+"configura\n"
+"a través del archivo /etc/exports."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The DHCP start range"
-msgstr "Comienzo del rango de DHCP"
+msgid "Msec"
+msgstr "Msec"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "The internal domain name"
-msgstr "El nombre de dominio interno"
+msgid ""
+"=> Notice, a label changed:\n"
+"%s"
+msgstr ""
+"=> Aviso, una etiqueta cambiĂł:\n"
+"%s"
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "The DNS Server IP"
-msgstr "La IP del servidor DNS"
+msgid "Number of capture buffers:"
+msgstr "Cantidad de bĂșferes de captura :"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "IP de (este) servidor DHCP"
+msgid "Your choice? (0/1, default `%s') "
+msgstr "ÂżSu elecciĂłn? (0/1, por defecto '%s') "
-#: ../../standalone/drakgw:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"DHCP Server Configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
"\n"
-msgstr ""
-"ConfiguraciĂłn del servidor DHCP.\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
"\n"
-"AquĂ­ puede seleccionar opciones diferentes para la configuraciĂłn del "
-"servidor DHCP.\n"
-"Si no conoce el significado de una opción, simlpemente déjela como estå.\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
"\n"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Local Network adress"
-msgstr "DirecciĂłn de red local"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
msgstr ""
-"Puedo mantener su configuraciĂłn corriente y asumir que ya configurĂł un "
-"servidor DHCP; en ese caso, por favor verifique que leo correctamente la Red "
-"que usó para su red local; no la volveré a configurar y no tocaré la "
-"configuraciĂłn de su servidor DHCP.\n"
+"Se debe formatear cualquier particiĂłn nueva que ha sido definida para que\n"
+"se pueda utilizar (formatear significa crear un sistema de archivos)\n"
"\n"
-"La entrada DNS predeterminada es el Servidor de nombres de caché configurado "
-"en el cortafuegos. Lo puede reemplazar, por ej., con la IP del DNS de su "
-"ISP.\n"
+"Puede desear volver a formatear algunas particiones ya existentes para\n"
+"borrar cualquier dato que pudieran contener. Si asĂ­ lo desea, por favor\n"
+"seleccione también dichas particiones.\n"
"\n"
-"De lo contrario, puedo volver a configurar su interfaz y (volver a) "
-"configurar un servidor DHCP por Usted.\n"
+"Por favor note que no es necesario volver a formatear todas las particiones\n"
+"pre-existentes. Debe volver a formatear las particiones que contienen el\n"
+"sistema operativo (tales como \"/\", \"/usr\" o \"/var\") pero no tiene que\n"
+"volver a formatear particiones que contienen datos que desea preservar\n"
+"(tĂ­picamente \"/home\")\n"
+"\n"
+"Por favor, tenga sumo cuidado cuando selecciona las particiones. Después de\n"
+"formatear se borrarĂĄn todos los datos en las particiones seleccionadas y no\n"
+"podrĂĄ recuperarlos en absoluto.\n"
+"\n"
+"Haga clic sobre \"%s\" cuando esté listo para formatear las particiones.\n"
+"\n"
+"Haga clic sobre \"%s\" si desea elegir otra particiĂłn para la instalaciĂłn\n"
+"de su sistema operativo Mandrake Linux nuevo.\n"
"\n"
+"Haga clic sobre \"%s\" si desea seleccionar las particiones en las que se\n"
+"buscarĂĄn bloques defectuosos en el disco."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "French"
+msgstr "Francés"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTY)"
+msgstr "Checo (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
+#, c-format
+msgid "Hardware probing in progress"
+msgstr "DetecciĂłn de hardware en progreso"
#: ../../standalone/drakgw:1
#, c-format
+msgid "Net Device"
+msgstr "Dispositivo de red"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Summary"
+msgstr "Resumen"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
-"ConfiguraciĂłn corriente de `%s':\n"
-"\n"
-"Red: %s\n"
-"DirecciĂłn IP: %s\n"
-"Atributo IP: %s\n"
-"Controlador: %s"
+"(Puertos paralelo: /dev/lp0, /dev/lp1, ..., equivalen a LPT1:, LPT2, ..., "
+"1er impresora USB: /dev/usb/lp0, 2da impresora USB: /dev/usb/lp1, ...) "
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Current interface configuration"
-msgstr "ConfiguraciĂłn corriente de la interfaz"
+msgid "Next"
+msgstr "Siguiente"
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Show current interface configuration"
-msgstr "Mostrar la configuraciĂłn corriente de la interfaz"
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "No puede instalar el cargador de arranque en una particiĂłn %s\n"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "No (experts only)"
-msgstr "No (sĂłlo expertos)"
+msgid "CHAP"
+msgstr "CHAP"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Automatic reconfiguration"
-msgstr "Volver a configurar automĂĄticamente"
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp/zeroconf)"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
"\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
"\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
-"AtenciĂłn, el adaptador de red (%s) ya estĂĄ configurado.\n"
"\n"
-"ÂżDesea volver a configurarlo automĂĄticamente?\n"
+"Bienvenido.\n"
"\n"
-"Puede hacerlo manualmente pero necesita saber lo que estĂĄ haciendo."
+"Los parĂĄmetros de la instalaciĂłn automĂĄticas estĂĄn disponibles en las "
+"secciones de la izquierda"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface already configured"
-msgstr "Interfaz de red ya configurada"
+msgid "Puerto Rico"
+msgstr "Puerto Rico"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""
-"Por favor, elija qué adaptador de red estarå conectado a su red de årea "
-"local."
+"se necesita el paquete 'ImageMagick' para un funcionamiento correcto.\n"
+"Haga clic sobre \"Aceptar\" para instalarlo o sobre \"Cancelar\" para salir"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "Lituano \"numérico\" QWERTY"
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
-"%s\n"
"\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
msgstr ""
-"SĂłlo hay un adaptador de red configurado en su sistema:\n"
+"Se quitarĂĄn los paquetes siguientes para permitir actualizar su sistema: %s\n"
"\n"
-"%s\n"
"\n"
-"Se va a configurar su red de ĂĄrea local con ese adaptador."
+"ÂżRealmente desea quitar estos paquetes?\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface"
-msgstr "Interfaz de red"
+msgid "Anguilla"
+msgstr "Anguilla"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"No se ha detectado ningĂșn adaptador de red en su sistema. Por favor, ejecute "
-"la herramienta de configuraciĂłn del hardware."
+msgid "NIS Domain"
+msgstr "Dominio NIS"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No network adapter on your system!"
-msgstr "ÂĄNo hay ningĂșn adaptador de red en su sistema!"
+msgid ""
+"\n"
+"- User Files:\n"
+msgstr ""
+"\n"
+"- Archivos de usuario:\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s"
-msgstr "Interfaz %s"
+msgid "Antarctica"
+msgstr "AntĂĄrtica"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interfaz %s (usando el mĂłdulo %s)"
+msgid "Mount options"
+msgstr "Opciones de montaje"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Net Device"
-msgstr "Dispositivo de red"
+msgid "Jamaica"
+msgstr "Jamaica"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
-"Por favor, ingrese el nombre de la Interfaz conectada a la Internet.\n"
-"\n"
-"Ejemplos:\n"
-"\t\tppp+ para conexiones por mĂłdem o DSL,\n"
-"\t\teth0, o eth1 para conexiĂłn por cable,\n"
-"\t\tippp+ para una conexiĂłn RDSI.\n"
+"Asignar dispositivos 'crudos' a dispositivos de bloque (como las particiones "
+"de los discos), para usar aplicaciones como Oracle o reproductores DVD"
-#: ../../standalone/drakgw:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
msgstr ""
-"EstĂĄ a punto de configurar su computadora para compartir la conexiĂłn a "
-"Internet.\n"
-"Con esta caracterĂ­stica, otras computadoras de su red local podrĂĄn usar la "
-"conexiĂłn a Internet de esta computadora.\n"
-"\n"
-"Debe asegurarse que ha configurado su acceso a la Red/Internet utilizando "
-"drakconnect antes de proceder.\n"
+"Argumentos: (arg, alert=1)\n"
"\n"
-"Nota: necesita un adaptador de red dedicado para configurar una red de ĂĄrea "
-"local (LAN)."
+"Habilitar/deshabilitar protección de engaño de resolución de nombres. Si\n"
+"\\fIalert\\fP es verdadero, también reportar a syslog."
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Compartir la conexiĂłn a Internet"
+msgid "Please wait, preparing installation..."
+msgstr "Preparando la instalaciĂłn. Espere, por favor"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Ahora, la conexiĂłn compartida a Internet estĂĄ activa."
+msgid "Czech (QWERTZ)"
+msgstr "Checo (QWERTZ)"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Enabling servers..."
-msgstr "Activando los servidores..."
+msgid "Track network card id (useful for laptops)"
+msgstr "Id tarjeta de red (Ăștil para portĂĄtiles)"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "dismiss"
-msgstr "rechazar"
+msgid "The port number should be an integer!"
+msgstr "ÂĄEl nĂșmero de puerto debe ser un nĂșmero entero!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "reconfigure"
-msgstr "reconfigurar"
+msgid "You must choose an image file first!"
+msgstr "ÂĄPrimero debe elegir un archivo de imagen!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "enable"
-msgstr "activar"
+msgid "Restore from Hard Disk."
+msgstr "Restaurar desde el disco rĂ­gido."
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Ya se ha realizado la configuraciĂłn de la conexiĂłn compartida a la "
-"Internet.\n"
-"En este momento estĂĄ deshabilitada.\n"
-"\n"
-"¿Qué desea hacer?"
+msgid "Add to LVM"
+msgstr "Añadir al LVM"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Ahora, la conexiĂłn compartida a Internet estĂĄ desactivada"
+msgid "DNS server"
+msgstr "Servidor DNS"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Ahora, la conexiĂłn compartida a Internet estĂĄ inactiva."
+msgid "Trinidad and Tobago"
+msgstr "Trinidad y Tobago"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disabling servers..."
-msgstr "Desactivando los servidores..."
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr "LPD y LPRng no soportan impresoras IPP.\n"
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "disable"
-msgstr "desactivar"
+msgid "simple"
+msgstr "simple"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Ya se ha realizado la configuraciĂłn de la conexiĂłn compartida a Internet.\n"
-"Ahora estĂĄ activa.\n"
-"\n"
-"¿Qué desea hacer?"
+msgid "Clear all"
+msgstr "Borrar todas"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Ahora, la conexiĂłn compartida a Internet estĂĄ activada ahora"
+msgid "No test pages"
+msgstr "No hay pĂĄginas de prueba"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
-msgstr "Lo siento, sĂłlo se soportan los nĂșcleos 2.4."
+msgid "Adapter %s: %s"
+msgstr "Adaptador %s: %s"
-#: ../../standalone/drakhelp:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
+msgid "Falkland Islands (Malvinas)"
+msgstr "Islas Malvinas"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Unknown model"
+msgstr "Modelo desconocido"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check files/directories writable by everybody."
msgstr ""
-"No se instalĂł navegador en su sistema, por favor instale uno si desea "
-"navegar el sistema de ayuda"
+"si se pone en sĂ­, verificar archivos/directorios que todos pueden escribir."
-#: ../../standalone/drakperm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "authentication"
+msgstr "AutentificaciĂłn"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Path"
-msgstr "Ruta"
+msgid "Backup Now"
+msgstr "Respaldar Ahora"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "group :"
-msgstr "grupo :"
+msgid "/_File"
+msgstr "/_Archivo"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "user :"
-msgstr "usuario :"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Quitando la impresora de Star Office/OpenOffice.org/GIMP"
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
#, c-format
-msgid "Path selection"
-msgstr "SelecciĂłn de ruta"
+msgid ""
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
+msgstr ""
+"Lanza el filtrado de paquetes para los nĂșcleos de Linux de la serie 2.2,\n"
+"para configurar un cortafuegos que protege a su mĂĄquina de los ataques de la "
+"red."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "when checked, owner and group won't be changed"
-msgstr "cuando estå marcado, el grupo y el dueño no se cambiarån"
+msgid "Tamil (ISCII-layout)"
+msgstr "Tamil (disposiciĂłn ISCII)"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use group id for execution"
-msgstr "Usar ID del grupo para la ejecuciĂłn"
+msgid "Mayotte"
+msgstr "Mayotte"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use owner id for execution"
-msgstr "Usar ID del dueño para la ejecución"
+msgid "Creating auto install floppy..."
+msgstr "Creando el disquete de instalaciĂłn automĂĄtica"
-#: ../../standalone/drakperm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
-"Usado para directorio:\n"
-" sólo el dueño del directorio o archivo en este directorio lo puede borrar"
+msgid "Searching for scanners ..."
+msgstr "Buscando escĂĄneres..."
-#: ../../standalone/drakperm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Set-GID"
-msgstr "Set-GID"
+msgid "Partitioning"
+msgstr "Particionando"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Set-UID"
-msgstr "Set-UID"
+msgid "Russia"
+msgstr "Rusia"
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "sticky-bit"
-msgstr "bit pegajoso"
+msgid "ethernet card(s) detected"
+msgstr "tarjeta(s) de red detectada(s)"
-#: ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Property"
-msgstr "Propiedad"
+msgid "Syslog"
+msgstr "Syslog"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Permissions"
-msgstr "Permisos"
+msgid "Can't create catalog!"
+msgstr "ÂĄNo se puede crear catĂĄlogo!"
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Current user"
-msgstr "Usuario corriente"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
+msgstr ""
+"Complete su configuraciĂłn de seguridad con este software fĂĄcil de usar que "
+"combina componentes de alto rendimiento tales como un cortafuegos, un "
+"servidor y cliente de red privada virtual (VPN), un sistema de detecciĂłn de "
+"intrusos y un administrador del trĂĄfico."
-#: ../../standalone/drakperm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "browse"
-msgstr "examinar"
+msgid "Not enough free space for auto-allocating"
+msgstr "No hay espacio libre suficiente para la asignaciĂłn automĂĄtica"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Edit current rule"
-msgstr "Editar regla corriente"
+msgid "Set root password"
+msgstr "Contraseña de root"
-#: ../../standalone/drakperm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "edit"
-msgstr "editar"
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
+msgstr ""
+"No hay controlador libre para su tarjeta de sonido (%s), pero hay uno "
+"propietario en \"%s\"."
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Delete selected rule"
-msgstr "Borrar la regla seleccionada"
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr "Se perderån todos los datos de la partición %s tras cambiar su tamaño"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "delete"
-msgstr "borrar"
+msgid "Internet connection configuration"
+msgstr "ConfiguraciĂłn de la conexiĂłn a Internet"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Add a new rule at the end"
-msgstr "Añadir una regla nueva al final"
+msgid "Scanning for TV channels"
+msgstr "Buscando canales de TV"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "add a rule"
-msgstr "añadir una regla"
+msgid "Kernel:"
+msgstr "NĂșcleo:"
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Move selected rule down one level"
-msgstr "Bajar un nivel la regla seleccionada"
+msgid "/_About..."
+msgstr "/_Acerca..."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Down"
-msgstr "Bajar"
+msgid "Bengali"
+msgstr "Indio (BengalĂ­)"
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Move selected rule up one level"
-msgstr "Subir un nivel la regla seleccionada"
+msgid "Preference: "
+msgstr "Preferencia: "
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Up"
-msgstr "Subir"
+msgid "Wizard..."
+msgstr "Asistente..."
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "select perm file to see/edit"
-msgstr "seleccionar archivo a ver/editar"
+msgid "Services: %d activated for %d registered"
+msgstr "Servicios: %d activados de %d registrados"
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-"Drakperm se utiliza para ver archivos a utilizar para ajustar los permisos, "
-"dueños, y grupos por medio de msec.\n"
-"También puede editar sus reglas propias que sobre-escribirån las "
-"predeterminadas."
+msgid "Create a bootdisk"
+msgstr "Crear un disco de arranque"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "permissions"
-msgstr "permisos"
+msgid "Solomon Islands"
+msgstr "Islas SalomĂłn"
-#: ../../standalone/drakperm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "group"
-msgstr "grupo"
+msgid "(module %s)"
+msgstr "(mĂłdulo %s)"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "user"
-msgstr "usuario"
+msgid "Workgroup"
+msgstr "Grupo de trabajo"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "path"
-msgstr "ruta"
+msgid "Printer host name or IP"
+msgstr "Nombre de host o IP de la impresora"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "UbicaciĂłn del archivo auto_install.cfg"
+msgid "Host Path or Module"
+msgstr "Ruta del host o mĂłdulo"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
+msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr ""
-"Por favor indique donde se encuentra el archivo auto_install.cfg.\n"
-"\n"
-"DĂ©jelo en blanco si no desea configurar el modo de instalaciĂłn automĂĄtica.\n"
-"\n"
+"El nombre de la impresora sĂłlo deberĂ­a contener letras, nĂșmeros y el guiĂłn "
+"bajo"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
-"No se encontrĂł imagen de CD o DVD, por favor copie el programa de "
-"instalaciĂłn y los archivos rpm"
+msgid "Show current interface configuration"
+msgstr "Mostrar la configuraciĂłn corriente de la interfaz"
-#: ../../standalone/drakpxe:1
+#: ../../help.pm:1
#, c-format
-msgid "No image found"
-msgstr "No se encontrĂł imagen"
+msgid "Development"
+msgstr "Desarrollo"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Installation image directory"
-msgstr "Directorio de imagen de instalaciĂłn"
+msgid "Done"
+msgstr "Hecho"
-#: ../../standalone/drakpxe:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
-"Por favor, indique donde estarĂĄ disponible la imagen de instalaciĂłn.\n"
-"\n"
-"Si no tiene un directorio existente, por favor copie el contenido del CD o "
-"del DVD.\n"
-"\n"
+msgid "Web Server"
+msgstr "Servidor web"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The DHCP end ip"
-msgstr "Última IP del rango de DHCP"
+msgid "\tDo not include System Files\n"
+msgstr "\tNo incluir archivos del sistema\n"
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "The DHCP start ip"
-msgstr "Primera IP del rango de DHCP"
+msgid "Chile"
+msgstr "Chile"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
msgstr ""
-"El servidor DHCP permitirĂĄ a otras computadoras arrancar utilizando PXE en "
-"el rango de direcciones dado.\n"
+"Los controladores de impresiĂłn de inkjet que proporciona Lexmark sĂłlo "
+"admiten impresoras locales, no impresoras en mĂĄquinas remotas o servidores "
+"de impresiĂłn. Por favor, conecte su impresora a un puerto local o "
+"configĂșrelo en la mĂĄquina a la que estĂĄ conectada."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
"\n"
-"La direcciĂłn de red es %s utilizando una mĂĄscara de red de %s.\n"
+"Do not use \"scannerdrake\" for this device!"
+msgstr ""
+"Su dispositivo multifunciĂłn se configurĂł automĂĄticamente para poder "
+"escanear. Ahora puede escanear con \"scanimage\" (\"scanimage -d hp:%s\" "
+"para especificar el escĂĄner si tiene mĂĄs de uno) desde la lĂ­nea de comandos "
+"o con las interfaces grĂĄficas \"xscanimage\" o \"xsane\". Si estĂĄ usando "
+"GIMP, tambiĂ©n puede escanear seleccionado la entrada apropiada del menĂș "
+"\"Archivo\"/\"Adquirir\". Ejecute también \"man scanimage\" en la línea de "
+"comandos para obtener mĂĄs informaciĂłn.\n"
"\n"
+"ÂĄNo utilice \"scannerdrake\" para este dispositivo!"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
#, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Interfaz %s (en la red %s)"
+msgid "(already added %s)"
+msgstr "(%s ya fue añadido)"
-#: ../../standalone/drakpxe:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr ""
-"Por favor, elija la interfaz de red que se utilizarĂĄ para el servidor DHCP."
+msgid ", using command %s"
+msgstr ", usando comando %s"
-#: ../../standalone/drakpxe:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"EstĂĄ a punto de configurar su computadora para instalar un servidor PXE como "
-"servidor DHCP\n"
-"y un servidor TFTP para construir un servidor de instalaciĂłn.\n"
-"Con esa caracterĂ­stica, otras computadoras en su red local se podrĂĄn "
-"instalar utilizando esta computadora como fuente.\n"
-"\n"
-"Debe asegurarse que ha configurado su acceso a la Red/Internet utilizando "
-"drakconnect antes de proceder.\n"
-"\n"
-"Nota: necesita un adaptador de red dedicado para configurar una red de ĂĄrea "
-"local (LAN)."
+msgid "Alt and Shift keys simultaneously"
+msgstr "Las teclas Alt y Shift simultĂĄneamente"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Installation Server Configuration"
-msgstr "ConfiguraciĂłn del servidor de instalaciĂłn"
+msgid "Flags"
+msgstr "Flags"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "PXE Server Configuration"
-msgstr "ConfiguraciĂłn del servidor PXE"
+msgid "Add/Del Users"
+msgstr "Añadir/Quitar usuarios"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please wait, setting security options..."
-msgstr "Por favor espere, configurando las opciones de seguridad..."
+msgid "Host/network IP address missing."
+msgstr "Falta direcciĂłn IP del host/red."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please wait, setting security level..."
-msgstr "Por favor espere, configurando el nivel de seguridad..."
+msgid "weekly"
+msgstr "cada semana"
-#: ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Periodic Checks"
-msgstr "Verificaciones periĂłdicas"
+msgid "Settings"
+msgstr "ConfiguraciĂłn"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "System Options"
-msgstr "Opciones de sistema"
+msgid "The entered host/network IP is not correct.\n"
+msgstr "La IP del host/red ingresada no es correcta.\n"
-#: ../../standalone/draksec:1
+#: ../../any.pm:1
#, c-format
-msgid "Network Options"
-msgstr "Opciones de red"
+msgid "Here is the full list of available countries"
+msgstr "AquĂ­ tiene la lista completa de paĂ­ses disponibles"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Alternative test page (A4)"
+msgstr "PĂĄgina de prueba alternativa (A4)"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
-"Se pueden configurar las opciones siguientes para personalizar\n"
-"la seguridad de su sistema. Si necesita explicaciĂłn, mire la ayuda "
-"emergente.\n"
+"Si tiene todos los CD de la lista siguiente, haga clic sobre \"Aceptar\".\n"
+"Si no tiene ningĂșn CD, haga clic sobre \"Cancelar\".\n"
+"Si sĂłlo le faltan algunos CD, desmĂĄrquelos y haga clic sobre \"Aceptar\"."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Security Administrator:"
-msgstr "Administrador de seguridad:"
+msgid "Wait please"
+msgstr "Por favor, espere"
-#: ../../standalone/draksec:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Security Alerts:"
-msgstr "Alertas de seguridad:"
+msgid "PAP"
+msgstr "PAP"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Security Level:"
-msgstr "Nivel de seguridad:"
+msgid "Backup user files"
+msgstr "Respaldar archivos de usuarios"
-#: ../../standalone/draksec:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "(default value: %s)"
-msgstr " (valor predeterminado: %s)"
+msgid "New"
+msgstr "Nuevo"
-#: ../../standalone/draksec:1
-#, c-format
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-" to the Internet as a client.\n"
-"\n"
-"High: There are already some restrictions, and more automatic checks "
-"are run every night.\n"
-"\n"
-"Higher: The security is now high enough to use the system as a server "
-"which can accept\n"
-" connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-" should choose a lower level.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
"\n"
-"Paranoid: This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-" features are at their maximum\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
"\n"
-"Security Administrator:\n"
-" If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-" email)"
-msgstr ""
-"EstĂĄndar: Este es el nivel estĂĄndar recomendado para una computadora que se "
-"utilizarĂĄ para conectarse\n"
-"a la Internet como cliente.\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
"\n"
-"Alta: Ya hay algunas restricciones, y mĂĄs verificaciones automĂĄticas se "
-"corren cada noche.\n"
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
"\n"
-"MĂĄs alta: La seguridad ahora es lo suficientemente alta para utilizar el "
-"sistema como un servidor que\n"
-"puede aceptar conexiones de muchos clientes. Si su mĂĄquina sĂłlo es un "
-"cliente de la Internet,\n"
-"deberĂ­a elegir un nivel mĂĄs bajo.\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
"\n"
-"Paranoico: Este es similar al nivel anterior, pero el sistema estĂĄ cerrado "
-"por completo y las\n"
-"caracterĂ­sticas de seguridad estĂĄn al mĂĄximo.\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
"\n"
-"Administrador de seguridad: Si se activa la opciĂłn 'Alertas de seguridad', "
-"se enviarĂĄn las alertas\n"
-"de seguridad a este usuario (nombre o correo-e)"
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
+msgstr ""
+"Este es el punto de decisiĂłn mĂĄs crucial para la seguridad de su sistema\n"
+"GNU/Linux: tendrå que ingresar la contraseña de \"root\". El usuario\n"
+"\"root\" es el administrador del sistema y es el Ășnico autorizado a hacer\n"
+"actualizaciones, agregar usuarios, cambiar la configuraciĂłn general del\n"
+"sistema, etc. Resumiendo, ÂĄ\"root\" puede hacer de todo! Es por esto que\n"
+"deberå elegir una contraseña que sea difícil de adivinar - DrakX le dirå si\n"
+"la que eligiĂł es demasiado fĂĄcil. Como puede ver no es forzoso ingresar una\n"
+"contraseña, pero le recomendamos encarecidamente que ingrese una. GNU/Linux\n"
+"es tan propenso a errores del operador como cualquier otro sistema\n"
+"operativo. Es importante que sea difĂ­cil convertirse en \"root\" debido a\n"
+"que \"root\" puede sobrepasar todas las limitaciones y borrar, sin\n"
+"intenciĂłn, todos los datos que se encuentran en las particiones accediendo\n"
+"a las mismas sin el cuidado suficiente.\n"
"\n"
+"La contraseña debería ser una mezcla de caracteres alfanuméricos y tener al\n"
+"menos una longitud de 8 caracteres. Nunca escriba la contraseña de \"root\"\n"
+"- por ejemplo, en un papel - eso hace que sea muy fĂĄcil comprometer a un\n"
+"sistema.\n"
"\n"
+"Sin embargo, no debería hacer la contraseña muy larga o complicada ¥debido\n"
+"a que Usted debe poder recordarla!\n"
"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
-msgstr ""
+"La contraseña no se mostrarå en la pantalla a medida que Usted la teclee.\n"
+"Por lo tanto tendrå que teclear la contraseña dos veces para reducir la\n"
+"posibilidad de un error de tecleo. Si ocurre que Usted comete dos veces el\n"
+"mismo error de tecleo, tendrå que utilizar esta contraseña \"incorrecta\"\n"
+"la primera vez que se conecte.\n"
"\n"
+"Si desea que el acceso a esta computadora esté controlado por un servidor\n"
+"de autenticaciĂłn, haga clic sobre el botĂłn \"%s\".\n"
"\n"
+"Si su red usa los protocolos LDAP, NIS, o servicios de autenticaciĂłn de PDC\n"
+"Dominio de Windows, seleccione el botón apropiado como método de\n"
+"autenticaciĂłn. Si no sabe cual utilizar, deberĂ­a preguntar al administrador\n"
+"de su red.\n"
"\n"
-"Nota: si tiene una tarjeta de sonido ISA PnP, tendrĂĄ que utilizar el "
-"programa sndconfig. Simplemente teclee \"sndconfig\" en una consola."
+"Si ocurre que tiene problemas para recordar contraseñas, puede elegir el\n"
+"botĂłn \"%s\", si es que su computadora nunca estarĂĄ conectada a la Internet\n"
+"o Usted confĂ­a absolutamente en cualquier persona que tenga acceso a la\n"
+"misma."
-#: ../../standalone/draksound:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"If you do not know what to choose, stay with the default option."
msgstr ""
-"No se detectĂł tarjeta de sonido en su mĂĄquina. Por favor, verifique que "
-"tiene conectada correctamente una tarjeta de sonido soportada por Linux.\n"
-"\n"
-"\n"
-"Puede visitar nuestra base de datos de hardware en:\n"
-"\n"
+"En este punto, DrakX le permitirĂĄ elegir el nivel de seguridad deseado para\n"
+"la mĂĄquina. Como regla general, el nivel de seguridad deberĂ­a ser mayor\n"
+"cuanto mĂĄs cruciales sean los datos que tenga almacenados, o si la mĂĄquina\n"
+"estarĂĄ directamente expuesta a la Internet. No obstante, un nivel de\n"
+"seguridad mĂĄs alto generalmente se obtiene a expensas de la facilidad de\n"
+"uso.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"Si no sabe cual elegir, no cambie la opciĂłn predeterminada."
-#: ../../standalone/draksound:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No Sound Card detected!"
-msgstr "ÂĄNo se detectĂł tarjeta de sonido!"
+msgid "Load from floppy"
+msgstr "Cargar desde un disquete"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "%s BootSplash (%s) preview"
-msgstr "Bootsplash de %s. No se puede crear la previsualizaciĂłn (%s)"
+msgid "The following printer was auto-detected. "
+msgstr "Se detectĂł automĂĄticamente la impresora siguientes. "
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Generating preview ..."
-msgstr "Generando previsualizaciĂłn..."
+msgid "Boot Floppy"
+msgstr "Disquete de arranque"
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You must choose an image file first!"
-msgstr "ÂĄPrimero debe elegir un archivo de imagen!"
+msgid "Norwegian"
+msgstr "Noruego"
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "ProgressBar color selection"
-msgstr "selecciĂłn del color de la barra de progreso"
+msgid "Searching for new scanners ..."
+msgstr "Buscando escĂĄneres nuevos..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
-msgstr "ÂĄTodavĂ­a este tema no tiene un bootsplash en %s!"
+msgid "Apache World Wide Web Server"
+msgstr "Servidor de World Wide Web Apache"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "stepping of the cpu (sub model (generation) number)"
+msgstr "Paso de la CPU (nĂșmero de sub-modelo - generaciĂłn)"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "saving Bootsplash theme..."
-msgstr "guardando tema de Bootsplash..."
+msgid "select path to restore (instead of /)"
+msgstr "seleccione la ruta para restaurar (en vez de /)"
#: ../../standalone/draksplash:1
#, c-format
-msgid "choose image file"
-msgstr "elija un archivo de imagen"
+msgid "Configure bootsplash picture"
+msgstr "Configurar foto de bootsplash"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "choose image"
-msgstr "elija imagen"
+msgid "China"
+msgstr "China"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configure bootsplash picture"
-msgstr "Configurar foto de bootsplash"
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr ""
+"(Debe asegurarse que todas sus impresoras estĂĄn conectadas y encendidas).\n"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Make kernel message quiet by default"
-msgstr "Predeterminadamente el mensaje del nĂșcleo es \"silencioso\""
+msgid "Georgia"
+msgstr "Georgia"
-#: ../../standalone/draksplash:1
+#: ../../standalone/printerdrake:1
#, c-format
-msgid "Display logo on Console"
-msgstr "Mostrar logo en la consola"
+msgid "Reading data of installed printers..."
+msgstr "Leyendo datos de impresoras instaladas..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose color"
-msgstr "elija color"
+msgid " Erase Now "
+msgstr " Borrar Ahora "
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Save theme"
-msgstr "guardar tema"
+msgid "server"
+msgstr "servidor"
-#: ../../standalone/draksplash:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Preview"
-msgstr "previsualizar"
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "Inserte un disquete formateado con FAT en la disquetera %s"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "the color of the progress bar"
-msgstr "el color de la barra de progreso"
+msgid "yes means the processor has an arithmetic coprocessor"
+msgstr "sĂ­, significa que el procesador tiene un coprocesador matemĂĄtico"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "the height of the progress bar"
-msgstr "la altura de la barra de progreso"
+msgid "Please Wait... Applying the configuration"
+msgstr "Espere, por favor... Aplicando la configuraciĂłn"
-#: ../../standalone/draksplash:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "the width of the progress bar"
-msgstr "el ancho de la barra de progreso"
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "ÂĄBienvenido a GRUB, el selector de SO de arranque!"
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-"coordenada y del ĂĄngulo superior\n"
-"izquierdo de la barra de progreso"
+msgid "Grub"
+msgstr "Grub"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
+msgid "SCSI controllers"
+msgstr "Controladores SCSI"
+
+#: ../../printer/main.pm:1
+#, c-format
+msgid " on LPD server \"%s\", printer \"%s\""
+msgstr " en servidor LPD \"%s\", impresora \"%s\""
+
+#: ../../standalone/drakedm:1
+#, c-format
+msgid "Choosing a display manager"
+msgstr "Eligiendo un administrador de conexiĂłn"
+
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, c-format
+msgid "Zeroconf Host name"
+msgstr "Nombre de la mĂĄquina Zeroconf"
+
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "IP address should be in format 1.2.3.4"
+msgstr "Las direcciones IP deben estar en el formato 1.2.3.4"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Ecuador"
+msgstr "Ecuador"
+
+#: ../../standalone/drakautoinst:1
+#, c-format
+msgid "Add an item"
+msgstr "Añadir un elemento"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The printers on this machine are available to other computers"
msgstr ""
-"coordenada x del ĂĄngulo superior\n"
-"izquierdo de la barra de progreso"
+"Las impresoras en esta mĂĄquina estĂĄn disponibles para otras computadoras"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "text box height"
-msgstr "altura del cuadro de texto"
+msgid "I can't find needed image file `%s'."
+msgstr "No se encuentra el archivo de imagen `%s' necesario."
-#: ../../standalone/draksplash:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "text width"
-msgstr "ancho del texto"
+msgid "No sound card detected. Try \"harddrake\" after installation"
+msgstr ""
+"No se detectĂł tarjeta de sonido. Pruebe \"harddrake\" luego de la instalaciĂłn"
-#: ../../standalone/draksplash:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"y coordinate of text box\n"
-"in number of characters"
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
msgstr ""
-"coordenada y del cuadro de texto\n"
-"en cantidad de caracteres"
+"Puerto no vĂĄlido: %s.\n"
+"El formato adecuado es \"puerto/tcp\" o \"puerto/udp\", \n"
+"donde puerto es un nĂșmero entre 1 y 65535."
-#: ../../standalone/draksplash:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
+msgid "Shell"
+msgstr "Shell"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "PCI"
+msgstr "PCI"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Sao Tome and Principe"
+msgstr "Santo Tomé y Príncipe"
+
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Can't login using username %s (bad password?)"
msgstr ""
-"coordenada x del cuadro de texto\n"
-"en cantidad de caracteres"
+"No se puede conectar utilizando el nombre de usuario %s (¿contraseña "
+"incorrecta?)"
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Browse"
-msgstr "Examinar"
+msgid "Azerbaidjani (latin)"
+msgstr "AzerbadjĂĄn (latĂ­n)"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Theme name"
-msgstr "Nombre del tema"
+msgid "Package not installed"
+msgstr "Paquete no instalado"
-#: ../../standalone/draksplash:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "final resolution"
-msgstr "resoluciĂłn final"
+msgid "Become a MandrakeExpert"
+msgstr "Conviértase en un MandrakeExpert"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "first step creation"
-msgstr "primer paso de creaciĂłn"
+msgid "American Samoa"
+msgstr "Samoa Americana"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
-"se necesita el paquete 'ImageMagick' para un funcionamiento correcto.\n"
-"Haga clic sobre \"Aceptar\" para instalarlo o sobre \"Cancelar\" para salir"
+msgid "Protocol"
+msgstr "Protocolo"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Copy fonts on your system"
+msgstr "Copiar tipografĂ­as en su sistema"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Harddrake help"
+msgstr "Ayuda de Harddrake"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Bogomips"
+msgstr "Bogomips"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Mandrake Terminal Server Configuration"
+msgstr "ConfiguraciĂłn del Servidor de Terminales de Mandrake"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
"\n"
-"You can visit our hardware database at:\n"
+" DrakBackup Report Details\n"
"\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-"No se detectĂł tarjeta de TV en su mĂĄquina. Por favor, verifique que tiene "
-"conectada correctamente una tarjeta de vĂ­deo/TV soportada por Linux.\n"
-"\n"
"\n"
-"Puede visitar nuestra base de datos de hardware en:\n"
+" Detalles del reporte de DrakBackup\n"
"\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No TV Card detected!"
-msgstr "ÂĄNo se detectĂł tarjeta de TV!"
+msgid "Restore all backups"
+msgstr "Restaurar todas las copias de respaldo"
-#: ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "ÂĄAhora, puede ejecutar xawtv (!bajo X Window!)!\n"
+msgid "if set to yes, check open ports."
+msgstr "si se pone en sĂ­, verificar puertos abiertos."
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Have a nice day!"
-msgstr "ÂĄQue tenga un buen dĂ­a!"
+msgid "This may take a moment to erase the media."
+msgstr "Borrar el soporte puede tardar unos momentos."
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "XawTV isn't installed!"
-msgstr "ÂĄXawTV no estĂĄ instalado!"
+msgid "You can't select/unselect this package"
+msgstr "No puede seleccionar/deseleccionar este paquete"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Hubo un error mientras se buscaban canales de TV"
+msgid "Warning"
+msgstr "Advertencia"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Scanning for TV channels"
-msgstr "Buscando canales de TV"
+msgid ""
+"\n"
+"- Other Files:\n"
+msgstr ""
+"\n"
+"- Otros archivos:\n"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Scanning for TV channels in progress ..."
-msgstr "Buscando canales de TV, en progreso ..."
+msgid "Remote host name"
+msgstr "Nombre de host del servidor remoto"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Area:"
-msgstr "Área:"
+msgid "deactivate now"
+msgstr "desactivar ahora"
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "TV norm:"
-msgstr "Norma de TV:"
+msgid "access to X programs"
+msgstr "acceso a programas X"
-#: ../../standalone/drakxtv:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Por favor,\n"
-"teclee su norma de tv y paĂ­s"
+msgid "Computing the size of the Windows partition"
+msgstr "Calculando el espacio de la particiĂłn Windows"
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#: ../../standalone/drakxtv:1
#, c-format
-msgid "Australian Optus cable TV"
-msgstr "TelevisiĂłn por cable Australian Optus"
+msgid "Italy"
+msgstr "Italia"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Newzealand"
-msgstr "Nueva Zelanda"
+msgid "Name of printer"
+msgstr "Nombre de la impresora"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "France [SECAM]"
-msgstr "Francia [SECAM]"
+msgid "disable"
+msgstr "desactivar"
-#: ../../standalone/drakxtv:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "East Europe"
-msgstr "Europa del este"
+msgid "error unmounting %s: %s"
+msgstr "error desmontando %s: %s"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "West Europe"
-msgstr "Europa del oeste"
+msgid "Do it!"
+msgstr "ÂĄHacerlo!"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "China (broadcast)"
-msgstr "China (difusiĂłn)"
+msgid "Cayman Islands"
+msgstr "Islas CaimĂĄn"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Japan (cable)"
-msgstr "JapĂłn (cable)"
+msgid "%s not responding"
+msgstr "%s no responde"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Japan (broadcast)"
-msgstr "JapĂłn (difusiĂłn)"
+msgid "Select model manually"
+msgstr "Seleccionar el modelo manualmente"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Canada (cable)"
-msgstr "CanadĂĄ (cable)"
+msgid "Format"
+msgstr "Formatear"
-#: ../../standalone/drakxtv:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "USA (cable-hrc)"
-msgstr "EEUU (cable-hrc)"
+msgid ""
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
+msgstr ""
+"La forma mĂĄs comĂșn de conexiĂłn ADSL es con pppoe.\n"
+"Algunas conexiones usan pptp, otras pocas usan dhcp.\n"
+"Si no lo sabe con seguridad, elija 'usar pppoe'"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "USA (cable)"
-msgstr "EEUU (cable)"
+msgid "Various"
+msgstr "Varios"
-#: ../../standalone/drakxtv:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "USA (broadcast)"
-msgstr "EEUU (difusiĂłn)"
+msgid "Zip"
+msgstr "Zip"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"XawTV isn't installed!\n"
"\n"
"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
msgstr ""
-"ÂĄXawTV no estĂĄ instalado!\n"
"\n"
"\n"
-"Si tiene una tarjeta de TV pero DrakX no la detectĂł (\"/etc/modules\" no\n"
-"tiene el mĂłdulo bttv ni saa7134) ni instalĂł xawtv, por favor envĂ­e\n"
-"el resultado de \"lspcidrake -v -f\" a \"install@mandrakesoft.com\" con\n"
-"el tema \"undetected TV card\".\n"
-"\n"
-"Lo puede instalar tecleando \"urpmi xawtv\", como root, en la consola."
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "primary"
-msgstr "primario"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "secondary"
-msgstr "secundario"
+"Printerdrak no pudo determinar qué modelo es su impresora %s. Por favor, "
+"escoja el modelo correcto de la lista."
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Click on a device in the left tree in order to display its information here."
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
msgstr ""
-"Haga clic sobre un dispositivo en el ĂĄrbol de la izquierda para obtener aquĂ­ "
-"informaciĂłn sobre el mismo."
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Unknown"
-msgstr "Desconocido"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "unknown"
-msgstr "desconocido"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Running \"%s\" ..."
-msgstr "Ejecutando \"%s\" ..."
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Run config tool"
-msgstr "Ejecutar herramienta de configuraciĂłn"
+"\n"
+"Marque las impresoras que desea transferir y haga clic \n"
+"sobre \"Transferir\"."
-#: ../../standalone/harddrake2:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Configure module"
-msgstr "Configurar mĂłdulo"
+msgid "PDQ"
+msgstr "PDQ"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Information"
-msgstr "InformaciĂłn"
+msgid "Albanian"
+msgstr "Albano"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Detected hardware"
-msgstr "Hardware detectado"
+msgid "Lithuania"
+msgstr "Lituania"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "Harddrake2 version "
-msgstr "Harddrake2 versiĂłn"
+msgid "Compact"
+msgstr "Compacto"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detection in progress"
-msgstr "DetecciĂłn en progreso"
+msgid "Detected model: %s %s"
+msgstr "Modelo detectado: %s %s"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Author:"
-msgstr "Autor:"
+msgid "MandrakeSoft has selected the best software for you"
+msgstr "MandrakeSoft ha seleccionado el mejor software para Usted"
#: ../../standalone/harddrake2:1
-#, c-format
+#, fuzzy, c-format
msgid ""
"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
msgstr ""
"Este es HardDrake, una herramienta de configuraciĂłn de hardware de "
"Mandrake.\n"
"VersiĂłn:"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "About Harddrake"
-msgstr "Acerca de Harddrake"
+msgid "Local files"
+msgstr "Archivos locales"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "/_About..."
-msgstr "/_Acerca..."
+msgid "maybe"
+msgstr "quizĂĄs"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "/_Report Bug"
-msgstr "/_Reportar un error"
+msgid "Panama"
+msgstr "PanamĂĄ"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
msgstr ""
-"Una vez que seleccionĂł un dispositivo, podrĂĄ ver informaciĂłn sobre el mismo "
-"en los campos mostrados en el marco derecho (\"InformaciĂłn\")"
+"Parece que su tarjeta grĂĄfica tiene un conector de salida para TV.\n"
+"Se puede configurar para trabajar con el frame-buffer.\n"
+"\n"
+"Para esto Usted tiene que conectar su tarjeta grĂĄfica a su TV antes de "
+"arrancar su computadora.\n"
+"Luego, elija la entrada \"TVout\" en el cargador de arranque\n"
+"\n"
+"ÂżTiene Usted esta caracterĂ­stica?"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Select a device !"
-msgstr "ÂĄSeleccione un dispositivo!"
+msgid "Monitor"
+msgstr "Monitor"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Description of the fields:\n"
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
"\n"
msgstr ""
-"DescripciĂłn de los campos:\n"
+"Estå a punto de configurar la impresión a una cuenta Windows con contraseña. "
+"Debido a una falla en la arquitectura del cliente Samba la contraseña se "
+"pone como texto plano en la lĂ­nea de comandos del cliente Samba que se usa "
+"para transmitir el trabajo de impresiĂłn al servidor Windows. Por lo tanto, "
+"es posible que cada usuario de esta mĂĄquina vea la clave en pantalla "
+"ejecutando \"ps auxwww\".\n"
+"\n"
+"Recomendamos utilizar alguna de las alternativas siguientes (en todos los "
+"casos tiene que asegurarse que sĂłlo las mĂĄquinas de su red local tienen "
+"acceso al servidor Windows, por ejemplo utilizando un cortafuegos):\n"
+"\n"
+"Usar una cuenta sin contraseña en su servidor Windows, por ej. la cuenta "
+"\"GUEST\" o una cuenta especial dedicada a la impresiĂłn. No quite la "
+"protección con contraseña de una cuenta personal o de la cuenta del "
+"administrador.\n"
+"\n"
+"Configure a su servidor Windows para que la impresión esté disponible bajo "
+"el protocolo LPD y configure la impresiĂłn desde esta mĂĄquina bajo el tipo de "
+"conexiĂłn \"%s\" en PrinterDrake.\n"
"\n"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Harddrake help"
-msgstr "Ayuda de Harddrake"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "/_Fields description"
-msgstr "/_DescripciĂłn de los campos"
-
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#, c-format
-msgid "/_Help"
-msgstr "/A_yuda"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "/_Quit"
-msgstr "/_Salir"
-
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "/Autodetectar unidades _jazz"
+msgid "65 thousand colors (16 bits)"
+msgstr "65 mil colores (16 bits)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/Autodetect _modems"
-msgstr "/Autodetectar _mĂłdems"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
+msgstr ""
+"\n"
+"- Guardar en el disco en la ruta: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "/Autodetect _printers"
-msgstr "/Autodetectar im_presoras"
+msgid "Size: %d KB\n"
+msgstr "Tamaño: %d KB\n"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "/_Options"
-msgstr "/_Opciones"
+msgid "Remove fonts on your system"
+msgstr "Quitar tipografĂ­as de su sistema"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "the vendor name of the processor"
-msgstr "el nombre del fabricante del procesador"
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
+msgstr ""
+"AtenciĂłn, el adaptador de red (%s) ya estĂĄ configurado.\n"
+"\n"
+"ÂżDesea volver a configurarlo automĂĄticamente?\n"
+"\n"
+"Puede hacerlo manualmente pero necesita saber lo que estĂĄ haciendo."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "the vendor name of the device"
-msgstr "el nombre del fabricante del dispositivo"
+msgid "Graphical interface at startup"
+msgstr "X al arrancar"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "El tipo de bus sobre el que estĂĄ conectado el ratĂłn"
+msgid "Please enter the directory to save:"
+msgstr "Por favor, ingrese el directorio a guardar:"
#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
-msgstr "Paso de la CPU (nĂșmero de sub-modelo - generaciĂłn)"
+#, fuzzy, c-format
+msgid "format of floppies supported by the drive"
+msgstr "Formatos que acepta la disquetera"
-#: ../../standalone/harddrake2:1
+#: ../../raid.pm:1
#, c-format
-msgid "Model stepping"
-msgstr "Paso del modelo"
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "No hay suficientes particiones para un RAID de nivel %d\n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "the number of the processor"
-msgstr "el nĂșmero del procesador"
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
+msgstr ""
+"EstĂĄn configuradas las impresoras siguientes. Haga doble clic sobre una de "
+"ellas para modificarla, para configurarla como predeterminada, o para "
+"obtener informaciĂłn sobre la misma."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Processor ID"
-msgstr "ID del procesador"
+msgid "Connected"
+msgstr "Conectado"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "network printer port"
-msgstr "puerto de impresora de red"
+msgid "USB printer \\#%s"
+msgstr "Impresora USB \\#%s"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "the name of the CPU"
-msgstr "el nombre de la CPU"
+msgid "Macedonian"
+msgstr "Macedonio"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Name"
-msgstr "Nombre"
+msgid "Bridges and system controllers"
+msgstr "Puentes y controladores del sistema"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "the number of buttons the mouse has"
-msgstr "la cantidad de botones que tiene el ratĂłn"
+msgid "/File/_Save"
+msgstr "/Archivo/_Guardar"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Number of buttons"
-msgstr "Cantidad de botones"
+msgid "Mali"
+msgstr "Mali"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Official vendor name of the cpu"
-msgstr "Nombre oficial del fabricante de la CPU"
+msgid "No details"
+msgstr "Sin detalles"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Model name"
-msgstr "Nombre del modelo"
+msgid "very nice"
+msgstr "muy bueno"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
-msgstr "GeneraciĂłn de la CPU (ej: 8 para PentiumIII, ...)"
+msgid "Preview"
+msgstr "previsualizar"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Model"
-msgstr "Modelo"
+msgid "Remote Control"
+msgstr "Control remoto"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "hard disk model"
-msgstr "modelo de disco rĂ­gido"
+msgid "Please select media for backup..."
+msgstr "Por favor, seleccione el soporte para la copia de respaldo..."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "class of hardware device"
-msgstr "clase de dispositivo de hardware"
+msgid "XFree86 server: %s\n"
+msgstr "Servidor XFree86: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Media class"
-msgstr "Clase de soporte"
+msgid "Allow Thin Clients"
+msgstr "Permitir Clientes livianos"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Sub generation of the cpu"
-msgstr "Sub-generaciĂłn de la CPU"
+msgid "Georgian (\"Russian\" layout)"
+msgstr "Georgiano (estilo \"ruso\")"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Level"
-msgstr "Nivel"
+msgid "/_Options"
+msgstr "/_Opciones"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Format of floppies supported by the drive"
-msgstr "Formatos que acepta la disquetera"
+msgid "Your printer model"
+msgstr "El modelo de su impresora"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "Floppy format"
-msgstr "Formato del disquete"
+msgid ""
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
+msgstr ""
+"\n"
+"\n"
+"(¡ATENCIÓN! Está utilizando XFS en su partición raíz,\n"
+"la creaciĂłn de un disquete de arranque en un disquete de 1.44Mb puede "
+"fallar\n"
+"porque XFS necesita un controlador muy grande)."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"\n"
+"- Delete hard drive tar files after backup.\n"
msgstr ""
-"Algunos de los primeros chips i486DX-100 no pueden volver a modo operativo "
-"sin problemas luego que se ejecuta la instrucciĂłn \"halt\""
+"\n"
+"- Borrar los archivos tar del disco luego de la copia de respaldo.\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Halt bug"
-msgstr "Bug de Halt"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
+msgstr ""
+"No se encontrĂł imagen de CD o DVD, por favor copie el programa de "
+"instalaciĂłn y los archivos rpm"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
-"Los primeros Pentium eran defectuosos y se colgaban decodificando el cĂłdigo "
-"de bytes F00F"
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "Herramienta de configuraciĂłn multipropĂłsito de Mandrake"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "F00f bug"
-msgstr "Bug F00F"
+msgid "Save"
+msgstr "Guardar"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
-"sĂ­, siginfica que el coprocesador matemĂĄtico tiene adjunto un vector de "
-"excepciones"
+msgid "The %s is unsupported"
+msgstr "El %s no estĂĄ soportado"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr "Si la FPU tiene o no un vector de irq"
+msgid "Load the drivers for your usb devices."
+msgstr "Carga los controladores para sus dispositivos USB."
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr "sĂ­, significa que el procesador tiene un coprocesador matemĂĄtico"
+msgid "Disk"
+msgstr "Disco"
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Is FPU present"
-msgstr "FPU estĂĄ presente"
+msgid "Enter a printer device URI"
+msgstr "Introduzca el URI del dispositivo de impresiĂłn"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
msgstr ""
-"Los chips Intel Pentium fabricados primero tienen un bug en el procesador de "
-"coma flotante que no lograba la precisiĂłn deseada cuando se realizaba una "
-"divisiĂłn de coma flotante (FDIV)"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Fdiv bug"
-msgstr "Bug de Fdiv"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr "Flags del CPU reportados por el nĂșcleo"
+"El Ă©xito de MandrakeSoft se basa en el principio del Software Libre. Su "
+"sistema operativo nuevo es el resultado del trabajo colaborativo de parte de "
+"la Comunidad Linux mundial"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Flags"
-msgstr "Flags"
+msgid "Israel"
+msgstr "Israel"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr "el mĂłdulo del nĂșcleo GNU/Linux que maneja ese dispositivo"
+msgid "French Guiana"
+msgstr "Guayana Francesa"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Module"
-msgstr "MĂłdulo"
+msgid "default:LTR"
+msgstr "default:LTR"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr ""
-"dispositivo dinĂĄmico nuevo generado por el devfs incorporado del nĂșcleo"
+msgid "add a rule"
+msgstr "añadir una regla"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New devfs device"
-msgstr "Dispositivo devfs nuevo"
+msgid "A command line must be entered!"
+msgstr "ÂĄDebe ingresar un comando!"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "old static device name used in dev package"
-msgstr "nombre antiguo de dispositivo estĂĄtico utilizado en el paquete dev"
+msgid "Select user manually"
+msgstr "Seleccionar manualmente el usuario"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Old device file"
-msgstr "Archivo de dispositivo antiguo"
+msgid "Transfer printer configuration"
+msgstr "Transferir configuraciĂłn de la impresora"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This field describes the device"
-msgstr "Este campo describe al dispositivo"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "ÂżDesea habilitar la impresiĂłn en las impresoras mencionadas arriba?\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
msgstr ""
-"La frecuencia de la CPU en MHz (Megahertz que en una primera aproximaciĂłn se "
-"puede considerar como la cantidad de millones instrucciones que la CPU puede "
-"ejecutar por segundo)"
+"Para que esto funcione con un PDC de W2K, probablemente necesite que el "
+"administrador ejecute: C:\\>net localgroup \"Pre-Windows 2000 Compatible "
+"Access\" everyone /add y vuelva a iniciar el servidor.\n"
+"También necesitarå el nombre de usuario/contraseña de un Administrador de "
+"Dominio para unir la mĂĄquina al dominio Windows(TM).\n"
+"Si todavĂ­a no estĂĄ habilitada la red, DrakX intentarĂĄ unirse al dominio "
+"luego de la etapa de configuraciĂłn de red.\n"
+"Si esta configuraciĂłn falla por algĂșn motivo y no funciona la autenticaciĂłn "
+"PDC, ejecute 'smbpasswd -j DOMINIO -U USUARIO%%CONTRASEÑA' utilizando su "
+"Dominio Windows(TM), y Nombre de usuario/Contraseña de Administrador, luego "
+"del arranque del sistema.\n"
+"El comando 'wbinfo -t' probarĂĄ si sus secretos de autenticaciĂłn son buenos."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Frequency (MHz)"
-msgstr "Frecuencia (MHz)"
+msgid "%s (Port %s)"
+msgstr "%s (Puerto %s)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
+msgid "Use network connection to backup"
+msgstr "Usar conexiĂłn de red para realizar copia de respaldo"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
msgstr ""
-"Nivel de informaciĂłn que se puede obtener por medio de la instrucciĂłn cpuid"
+"Argumentos: (arg)\n"
+"\n"
+"Habilitar/Deshabilitar sulogin(8) en nivel de usuario Ășnico."
-#: ../../standalone/harddrake2:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Cpuid level"
-msgstr "Nivel de cpuid"
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
+"Ahora es el momento de especificar los programas que desea instalar en su\n"
+"sistema. Hay miles de paquetes disponibles para Mandrake Linux, y para\n"
+"hacer mĂĄs simple el manejo de los paquetes, los mismos se han puesto en\n"
+"grupos de aplicaciones similares.\n"
+"\n"
+"Los paquetes se ordenan en grupos que corresponden a un uso particular de\n"
+"su mĂĄquina. Mandrake Linux tiene cuatro instalaciones predefinidas\n"
+"disponibles. Puede pensar en estas clases de instalaciĂłn como contenedores\n"
+"para los distintos paquetes. Puede mezclar y hacer coincidir aplicaciones\n"
+"de varios grupos, por lo que una instalaciĂłn de \"EstaciĂłn de trabajo\"\n"
+"puede tener instaladas aplicaciones del grupo \"Desarrollo\".\n"
+"\n"
+" * \"%s\": si planifica utilizar su mĂĄquina como una estaciĂłn de trabajo,\n"
+"seleccione una o mĂĄs aplicaciones del grupo estaciĂłn de trabajo.\n"
+"\n"
+" * \"%s\": si la mĂĄquina se utilizarĂĄ para programaciĂłn, elija los paquetes\n"
+"apropiados de ese grupo.\n"
+"\n"
+" * \"%s\": si pretende usar la mĂĄquina como un servidor, seleccione cuĂĄles\n"
+"de los servicios mĂĄs comunes desea instalar en su mĂĄquina.\n"
+"\n"
+" * \"%s\": aquĂ­ es donde seleccionarĂĄ su entorno grĂĄfico preferido. Si\n"
+"desea tener una estaciĂłn de trabajo grĂĄfica, debe seleccionar al menos uno.\n"
+"\n"
+"Si mueve el cursor del ratĂłn sobre el nombre de un grupo se mostrarĂĄ un\n"
+"pequeño texto explicativo acerca de ese grupo. Si deselecciona todos los\n"
+"grupos cuando estĂĄ realizando una instalaciĂłn regular (es decir, no una\n"
+"actualizaciĂłn), aparecerĂĄ un diĂĄlogo que propone opciones diferentes para\n"
+"una instalaciĂłn mĂ­nima:\n"
+"\n"
+" * \"%s\": instala la menor cantidad de paquetes posible para tener un\n"
+"escritorio grĂĄfico que funcione.\n"
+"\n"
+" * \"%s\": instala el sistema base mĂĄs algunos utilitarios bĂĄsicos y la\n"
+"documentaciĂłn de los mismos. Esta instalaciĂłn es adecuada para configurar\n"
+"un servidor.\n"
+"\n"
+" * \"%s\": instalarĂĄ el mĂ­nimo necesario estricto para obtener un sistema\n"
+"Linux que funciona. Con esta instalaciĂłn sĂłlo tendrĂĄ una interfaz de lĂ­nea\n"
+"de comandos. Esta instalaciĂłn ocupa alrededor de 65 MB.\n"
+"\n"
+"Puede marcar la casilla \"%s\" que es Ăștil si estĂĄ familiarizado con los\n"
+"paquetes que se ofrecen, o si desea tener un control total sobre lo que se\n"
+"instalarĂĄ.\n"
+"\n"
+"Si iniciĂł la instalaciĂłn en el modo \"%s\" puede deseleccionar todos los\n"
+"grupos para evitar instalar cualquier paquete nuevo. Esto es Ăștil para\n"
+"reparar o actualizar un sistema existente."
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
-msgstr "Familia de la CPU (ej: 6 para clase i686)"
+msgid "Accept user"
+msgstr "Aceptar el usuario"
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, c-format
-msgid "Cpuid family"
-msgstr "Familia de cpuid"
+msgid "Server"
+msgstr "Servidor"
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr "Si esta CPU tiene o no el bug de la coma de Cyrix 6x86"
+msgid "Bad choice, try again\n"
+msgstr "Elección incorrecta, inténtelo de nuevo\n"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Coma bug"
-msgstr "Bug de la coma"
+msgid "Heard and McDonald Islands"
+msgstr "Islas Heard y McDonald"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
-"capacidades especiales del controlador (posibilidad de grabar y/o soporte de "
-"DVD)"
+msgid "No alternative driver"
+msgstr "No hay controlador alternativo"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Drive capacity"
-msgstr "Capacidad de la unidad"
+msgid "Toggle to expert mode"
+msgstr "Cambiar al modo experto"
-#: ../../standalone/harddrake2:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Size of the (second level) cpu cache"
-msgstr "Tamaño del caché del CPU (de 2do nivel)"
+msgid "(on this machine)"
+msgstr "(en esta mĂĄquina)"
-#: ../../standalone/harddrake2:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Cache size"
-msgstr "Tamaño del caché"
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "Las direcciones de la pasarela deberĂ­an estar en el formato 1.2.3.4"
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
#, c-format
msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+"\"%s\" based winmodem detected, do you want to install needed software ?"
msgstr ""
-"- dispositivos PCI: el zĂłcalo PCI, dispositivo y funciĂłn de esta tarjeta\n"
-"- dispositivos EIDE: el dispositivo es o bien uno maestro o uno esclavo\n"
-"- dispositivos SCSI: el bus SCSI y los id de dispositivo SCSI"
+"winmodem basado en \"%s\" detectado, Âżdesea instalar el software necesario?"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Location on the bus"
-msgstr "UbicaciĂłn en el bus"
+msgid "Looking at packages already installed..."
+msgstr "Buscando paquetes ya instalados..."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+msgid "Use Differential Backups"
msgstr ""
-"- Dispositivos PCI y USB : esto lista el fabricante, dispositivo, ids del "
-"subfabricante y del subdispositivo PCI/USB"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Bus identification"
-msgstr "IdentificaciĂłn del bus"
+msgid "Driver"
+msgstr "Controlador"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
msgstr ""
-"El nĂșcleo GNU/Linux necesita correr un lazo de cĂĄlculo al arrancar para "
-"inicializar un contador. El resultado se almacena como bogomips como una "
-"manera de hacer un \"benchmark\" de la CPU."
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Bogomips"
-msgstr "Bogomips"
+"Linuxconf a veces realizarĂĄ varias tareas al arrancar para\n"
+"mantener la configuraciĂłn del sistema."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "canal EIDE/SCSI"
+msgid "Printer on remote lpd server"
+msgstr "Impresora en un servidor lpd remoto"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Channel"
-msgstr "Canal"
+msgid ""
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
+msgstr ""
+"Antes de instalar cualquier tipografĂ­a, asegĂșrese que tiene derecho de "
+"usarlas\n"
+"e instalarlas en su sistema.\n"
+"\n"
+"-Puede instalar las tipografĂ­as usando la manera normal. En casos raros,\n"
+"puede ser que tipografĂ­as \"falsas\" congelen a su servidor X."
-#: ../../standalone/harddrake2:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
msgstr ""
-"esto es el bus fĂ­sico sobre el cual se conecta el dispositivo (ej.: PCI, "
-"USB, ...)"
+"Yaboot es un cargador de arranque para el hardware NewWorld MacIntosh. El\n"
+"mismo puede arrancar o GNU/Linux, o MacOS o MacOSX si se encuentran en su\n"
+"computadora. Normalmente, estos sistemas operativos se detectan e instalan\n"
+"correctamente. Si este no es el caso, puede agregar una entrada a mano en\n"
+"esta pantalla. Tenga cuidado de elegir los parĂĄmetros correctos.\n"
+"\n"
+"Las opciones principales de Yaboot son:\n"
+"\n"
+" * Mensaje de Init: un mensaje de texto simple que se muestra antes del\n"
+"prompt de arranque.\n"
+"\n"
+" * Dispositivo de arranque: indica donde desea colocar la informaciĂłn\n"
+"necesaria para arrancar en GNU/Linux. Generalmente, se configura una\n"
+"particiĂłn bootstrap con anterioridad para contener esta informaciĂłn.\n"
+"\n"
+" * Demora de Open Firmware: a diferencia de LILO, hay dos demoras\n"
+"disponibles con Yaboot. La primera se mide en segundos y aquĂ­ puede elegir\n"
+"entre CD, arranque OF, MacOS o Linux.\n"
+"\n"
+" * Demora de arranque del nĂșcleo: esta demora es similar a la demora de\n"
+"arranque de LILO. Luego de seleccionar Linux, tendrå esta demora en décimas\n"
+"de segundo antes que se seleccione su descripciĂłn del nĂșcleo\n"
+"predeterminada.\n"
+"\n"
+" * ÂżHabilitar arranque desde el CD?: marcando esta opciĂłn Usted puede\n"
+"elegir \"C\" para el CD en el primer prompt de arranque.\n"
+"\n"
+" * ÂżHabilitar arranque OF?: marcando esta opciĂłn Usted puede elegir \"N\"\n"
+"para Open Firmware en el primer prompt de arranque.\n"
+"\n"
+" * SO predeterminado: puede seleccionar qué sistema operativo arrancarå por\n"
+"defecto cuando expira la demora de Open Firmware."
-#: ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Bus"
-msgstr "Bus"
+msgid "No mouse"
+msgstr "Sin ratĂłn"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "la lista de controladores alternativos para esta tarjeta de sonido"
+msgid "Germany"
+msgstr "Alemania"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Alternative drivers"
-msgstr "Controladores alternativos"
+msgid "Austria"
+msgstr "Austria"
-#: ../../standalone/keyboarddrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "ÂżDesea que la tecla BackSpace envĂ­e un Delete en la consola?"
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr ""
+"Use \"sndconfig\" luego de la instalaciĂłn para configurar su tarjeta de "
+"sonido"
-#: ../../standalone/keyboarddrake:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Por favor, seleccione la distribuciĂłn de su teclado."
+msgid "Collapse Tree"
+msgstr "Contraer el ĂĄrbol"
-#: ../../standalone/livedrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "ÂĄÂĄÂĄ No se puede iniciar la actualizaciĂłn en vivo !!!\n"
+msgid "Auto Install Configurator"
+msgstr "Configurador de InstalaciĂłn AutomĂĄtica"
-#: ../../standalone/livedrake:1
+#: ../../steps.pm:1
+#, c-format
+msgid "Configure networking"
+msgstr "Configurar la red"
+
+#: ../../any.pm:1
#, c-format
+msgid "Where do you want to install the bootloader?"
+msgstr "ÂżDĂłnde quiere instalar el cargador de arranque?"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
msgstr ""
-"Por favor, inserte el CD-ROM de la instalaciĂłn en su unidad y presione "
-"Aceptar.\n"
-"Si no lo tiene, presione Cancelar para evitar la actualizaciĂłn en vivo."
+"El primer paso es elegir el idioma de instalaciĂłn. En el ejemplo se elige\n"
+"\"%s\" como regiĂłn y \"%s\" como idioma.\n"
+"\n"
+"Su elecciĂłn de idioma preferido afectarĂĄ al idioma de la documentaciĂłn, el\n"
+"instalador y el sistema en general. Seleccione primero la regiĂłn en la que\n"
+"se encuentra, y luego el idioma que habla.\n"
+"\n"
+"Al hacer clic sobre el botĂłn \"%s\" podrĂĄ seleccionar otros idiomas para\n"
+"instalar en su estaciĂłn de trabajo, instalando asĂ­ los archivos especĂ­ficos\n"
+"para esos idiomas para la documentaciĂłn y las aplicaciones. Por ejemplo, si\n"
+"albergarå a gente de Francia en su måquina, seleccione Español como idioma\n"
+"principal en la vista de ĂĄrbol y \"%s\" en la secciĂłn avanzada.\n"
+"\n"
+"Note que no estĂĄ limitado a elegir un Ășnico idioma adicional. Puede elegir\n"
+"varios, o incluso instalarlos a todos eligiendo la casilla \"%s\".\n"
+"Seleccionar el soporte para un idioma significa que se instalarĂĄn las\n"
+"traducciones, tipografĂ­as, correctores ortogrĂĄficos, etc. para dicho\n"
+"idioma. Adicionalmente, la casilla \"%s\" permite que fuerce al sistema a\n"
+"utilizar Unicode (UTF-8) Sin embargo, note que esta es una caracterĂ­stica\n"
+"experimental. Si selecciona diferentes idiomas que necesitan codificaciones\n"
+"diferentes, de cualquier manera se instalarĂĄ el soporte para Unicode.\n"
+"\n"
+"Para cambiar de un idioma a otro, Usted puede ejecutar el comando\n"
+"\"localedrake\". Si lo hace como \"root\" cambiarĂĄ el idioma todo el\n"
+"sistema, si lo hace como usuario no privilegiado cambiarĂĄ sĂłlo el idioma\n"
+"predeterminado de ese usuario."
-#: ../../standalone/livedrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Change Cd-Rom"
-msgstr "Cambie el CD-ROM"
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr "El %s no estĂĄ soportado por esta versiĂłn de Mandrake Linux."
-#: ../../standalone/localedrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr "Se ha realizado el cambio, pero no se harĂĄ efectivo hasta que salga"
+msgid "DHCP client"
+msgstr "cliente DHCP"
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Save as.."
-msgstr "Guardar como..."
+msgid "Restoring from file %s failed: %s"
+msgstr "FallĂł la restauraciĂłn a partir del archivo %s: %s"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please enter your email address below "
-msgstr "Por favor, ingrese su direcciĂłn de correo electrĂłnico debajo "
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "RatĂłn Logitech (serie, antiguo tipo C7)"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "alert configuration"
-msgstr "configuraciĂłn de alerta"
+msgid "Are you sure that you want to set up printing on this machine?\n"
+msgstr "ÂżEstĂĄ seguro que desea configurar la impresiĂłn en esta mĂĄquina?\n"
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "RecibirĂĄ una alerta si la carga es mayor que este valor"
+msgid "New devfs device"
+msgstr "Dispositivo devfs nuevo"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "load setting"
-msgstr "configuraciĂłn de la carga"
+msgid "ERROR: Cannot spawn %s."
+msgstr "ERROR: No se puede lanzar %s."
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr ""
-"RecibirĂĄ una alerta si alguno de ls servicios seleccionados ya no estĂĄ "
-"corriendo"
+msgid "Boot Style Configuration"
+msgstr "ConfiguraciĂłn del estilo de arranque"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Automatic time synchronization"
+msgstr "SincronizaciĂłn automĂĄtica de hora (usando NTP)"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "service setting"
-msgstr "configuraciĂłn del servicio"
+msgid "Backup files not found at %s."
+msgstr "Copiar archivos no encontrados en %s."
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Xinetd Service"
-msgstr "Servicio Xinetd"
+msgid "Thank you for choosing Mandrake Linux 9.1"
+msgstr "Gracias por elegir Mandrake Linux 9.1"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Webmin Service"
-msgstr "Servicio Webmin"
+msgid "Armenian (phonetic)"
+msgstr "Armenio (fonético)"
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "SSH Server"
-msgstr "Servidor SSH"
+msgid "Card model:"
+msgstr "Modelo de la tarjeta :"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Samba Server"
-msgstr "Servidor Samba"
+msgid "Thin Client"
+msgstr "Cliente liviano"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Postfix Mail Server"
-msgstr "Servidor de correo Postfix"
+msgid "Start Server"
+msgstr "Iniciar el Servidor"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ftp Server"
-msgstr "Servidor FTP"
+msgid "Turkmenistan"
+msgstr "TurkmenistĂĄn"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Domain Name Resolver"
-msgstr "Nombres de dominio"
+msgid "All remote machines"
+msgstr "Todas las mĂĄquinas remotas"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "Servidor de World Wide Web Apache"
+msgid "Install themes"
+msgstr "Instalar temas"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
msgstr ""
-"Bienvenido a la herramienta de configuraciĂłn del correo.\n"
-"\n"
-"AquĂ­ podrĂĄ configurar su sistema de alerta.\n"
+" actualizaciones 2002 MandrakeSoft por Stew Benedict <sbenedict"
+"\\@mandrakesoft.com>"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "Mail alert configuration"
-msgstr "ConfiguraciĂłn de alerta por correo"
+msgid "Espanol"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mail alert"
-msgstr "Alerta por correo"
+msgid "Preparing installation"
+msgstr "Preparando la instalaciĂłn"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "por favor, espere, analizando el archivo: %s"
+msgid "Edit selected host/network"
+msgstr "Editar host/red seleccionada"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Content of the file"
-msgstr "Contenido del archivo"
+msgid "Add User -->"
+msgstr "Añadir usuario -->"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Calendar"
-msgstr "Calendario"
+msgid "Nauru"
+msgstr "Nauru"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Choose file"
-msgstr "Elija un archivo"
+msgid "True Type fonts installation"
+msgstr "InstalaciĂłn de tipografĂ­as True Type"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "but not matching"
-msgstr "pero no hay coincidencias"
+msgid "Auto-detect printers connected directly to the local network"
+msgstr ""
+"Detectar automĂĄticamente las impresoras conectadas directamente a la red "
+"local"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "matching"
-msgstr "coincidencia"
+msgid "LAN configuration"
+msgstr "ConfiguraciĂłn de la red local"
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Settings"
-msgstr "ConfiguraciĂłn"
+msgid "hard disk model"
+msgstr "modelo de disco rĂ­gido"
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "A tool to monitor your logs"
-msgstr "Una herramienta para ver sus archivos de registro (logs)"
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "No puede usar un Volumen LĂłgico LVM para el punto de montaje %s"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "search"
-msgstr "buscar"
+msgid "Get Windows Fonts"
+msgstr "Obtener tipografĂ­as de Windows"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Mandrake Tools Explanation"
-msgstr "Explicaciones de las herramientas de Mandrake"
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Syslog"
-msgstr "Syslog"
+msgid "Iranian"
+msgstr "IranĂ­"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Messages"
-msgstr "Mensajes"
+msgid "Croatia"
+msgstr "Croacia"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "User"
-msgstr "Usuario"
+msgid "Gateway:"
+msgstr "Pasarela:"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Help/_About..."
-msgstr "/Ayuda/_Acerca..."
+msgid "Add server"
+msgstr "Añadir servidor"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Options/Test"
-msgstr "/Opciones/Prueba"
+msgid "Remote printer name"
+msgstr "Nombre de la impresora remota"
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "/File/-"
-msgstr "/Archivo/-"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together in order to highly reduce hacking risks."
+msgstr ""
+"MandrakeSoft ha diseñado herramientas exclusivas para crear la versión de "
+"Linux mĂĄs segura jamĂĄs: DrakSec, una herramienta de administraciĂłn de la "
+"seguridad del sistema, y un cortafuegos potente se juntan para reducir "
+"drĂĄsticamente los riesgos de hacking."
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "/File/Save _As"
-msgstr "/Archivo/Guardar _Como"
+msgid "Device: "
+msgstr "Dispositivo: "
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, c-format
-msgid "<control>S"
-msgstr "<control>G"
+msgid "Printerdrake"
+msgstr "Printerdrake"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "/File/_Save"
-msgstr "/Archivo/_Guardar"
+msgid "License agreement"
+msgstr "Acuerdo de licencia"
-#: ../../standalone/logdrake:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "<control>O"
-msgstr "<control>A"
+msgid "System Options"
+msgstr "Opciones de sistema"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/File/_Open"
-msgstr "/Archivo/_Abrir"
+msgid "Please enter the directory where backups are stored"
+msgstr ""
+"Por favor, ingrese el directorio donde se almacenan las copias de respaldo"
-#: ../../standalone/logdrake:1
+#: ../../security/level.pm:1
#, c-format
-msgid "<control>N"
-msgstr "<control>N"
+msgid "Please choose the desired security level"
+msgstr "Por favor, elija el nivel de seguridad deseado"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "/File/_New"
-msgstr "/Archivo/_Nuevo"
+msgid "This host is already in the list, it cannot be added again.\n"
+msgstr "Este host ya estå en la lista, no se puede volver a añadir.\n"
-#: ../../standalone/logdrake:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Show only for the selected day"
-msgstr "Mostrar sĂłlo para el dĂ­a seleccionado"
+msgid ", USB printer"
+msgstr ", impresora USB"
-#: ../../standalone/mousedrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Emulate third button?"
-msgstr "ÂżEmular el tercer botĂłn?"
+msgid "Choose the applications that will support the fonts:"
+msgstr "Elija las aplicaciones que soportarĂĄn las tipografĂ­as:"
-#: ../../standalone/mousedrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please choose your mouse type."
-msgstr "Seleccione el tipo de su ratĂłn, por favor."
+msgid "Configure X"
+msgstr "ConfiguraciĂłn de X"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Connect %s"
-msgstr "Conectar %s"
+msgid "Turkish (traditional \"F\" model)"
+msgstr "Turco (modelo \"F\" tradicional)"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Disconnect %s"
-msgstr "Desconectar %s"
+msgid "Congratulations!"
+msgstr "ÂĄFelicidades!"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"AtenciĂłn, se ha detectado otra conexiĂłn con la Internet, tal vez usando su "
-"red"
+msgid "Use owner id for execution"
+msgstr "Usar ID del dueño para la ejecución"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "received"
-msgstr "recibido"
+msgid "Down"
+msgstr "Bajar"
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "transmitted"
-msgstr "transmitido"
+msgid "Raw printer (No driver)"
+msgstr "Impresora \"en crudo\" (sin controlador)"
-#: ../../standalone/net_monitor:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "received: "
-msgstr "recibido: "
+msgid "Install rpm"
+msgstr "Instalar rpm"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "sent: "
-msgstr "enviado: "
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
+msgstr ""
+"Para imprimir un archivo desde la lĂ­nea de comando (ventana de terminal) "
+"utilice el comando \"%s <archivo>\" o una herramienta de impresiĂłn grĂĄfica: "
+"\"xpp <archivo>\" o \"kprinter <archivo>\". Las herramientas grĂĄficas le "
+"permiten seleccionar la impresora y modificar las opciones de configuraciĂłn "
+"fĂĄcilmente.\n"
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Local measure"
-msgstr "Medida local"
+msgid "Time remaining "
+msgstr "Tiempo restante "
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "average"
-msgstr "promedio"
+msgid "UK keyboard"
+msgstr "BritĂĄnico"
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Color configuration"
-msgstr "ConfiguraciĂłn del color"
+msgid "Unmount"
+msgstr "Desmontar"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
-"FallĂł la conexiĂłn.\n"
-"Verifique su configuraciĂłn en el Centro de Control de Mandrake."
+msgid "Uninstall Fonts"
+msgstr "Desinstalar tipografĂ­as"
-#: ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Connection complete."
-msgstr "ConexiĂłn completa."
+msgid "Microsoft Explorer"
+msgstr "Microsoft Explorer"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Disconnection from the Internet complete."
-msgstr "DesconexiĂłn desde la Internet completa."
+msgid "German (no dead keys)"
+msgstr "AlemĂĄn (sin teclas muertas)"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disconnection from the Internet failed."
-msgstr "FallĂł la desconexiĂłn desde la Internet."
+msgid "Transferring %s..."
+msgstr "Transfiriendo %s ..."
-#: ../../standalone/net_monitor:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Connecting to the Internet "
-msgstr "Conectando a la Internet "
+msgid "32 thousand colors (15 bits)"
+msgstr "32 mil colores (15 bits)"
-#: ../../standalone/net_monitor:1
+#: ../../any.pm:1
#, c-format
-msgid "Disconnecting from the Internet "
-msgstr "Desconectando desde la Internet "
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
+msgstr "Puede exportar usando NFS o Samba. ÂżCuĂĄl elige"
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Por favor espere, probando su conexiĂłn..."
+msgid "Reboot"
+msgstr "Reiniciar"
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logs"
-msgstr "Registros"
+msgid "Gambia"
+msgstr "Gambia"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Connection Time: "
-msgstr "Tiempo de conexiĂłn: "
+msgid "Mandrake Control Center"
+msgstr "Centro de control de Mandrake"
-#: ../../standalone/net_monitor:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Receiving Speed:"
-msgstr "Velocidad de recepciĂłn:"
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
+msgstr ""
+"Puede ingresar otros puertos. \n"
+"Por ejemplo: 139/tcp 139/udp.\n"
+"Consulte /etc/services para mĂĄs informaciĂłn."
-#: ../../standalone/net_monitor:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Sending Speed:"
-msgstr "Velocidad de envĂ­o:"
+msgid ""
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
+msgstr ""
+"Monitor\n"
+"\n"
+" Normalmente el instalador puede detectar y configurar automĂĄticamente el\n"
+"monitor conectado a su mĂĄquina. Si este no es el caso, en esta lista puede\n"
+"elegir el monitor que realmente posee."
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Statistics"
-msgstr "EstadĂ­sticas"
+msgid "\t-Tape \n"
+msgstr "\t-Tape \n"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakhelp:1
#, c-format
-msgid "Profile "
-msgstr "Perfil "
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
+msgstr ""
+"No se instalĂł navegador en su sistema, por favor instale uno si desea "
+"navegar el sistema de ayuda"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Network Monitoring"
-msgstr "Monitoreo de la red"
+msgid "Remember this password"
+msgstr "Recordar esta contraseña"
-#: ../../standalone/printerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Reading data of installed printers..."
-msgstr "Leyendo datos de impresoras instaladas..."
+msgid "Internet Connection Sharing is now enabled."
+msgstr "Ahora, la conexiĂłn compartida a Internet estĂĄ activa."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Name/IP address of host:"
-msgstr "Nombre/direcciĂłn IP del host:"
+msgid "\t-Network by SSH.\n"
+msgstr "\t-Red por SSH.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr "Este host ya estå en la lista, no se puede volver a añadir.\n"
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
+msgstr ""
+"Si se detectĂł automĂĄticamente la impresora deseada, simplemente elĂ­jala de "
+"la lista y luego agregue el nombre de usuario, contraseña, y/o grupo de "
+"trabajo si es necesario."
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Scannerdrake"
-msgstr "Scannerdrake"
+msgid "Use the free space on the Windows partition"
+msgstr "Usar el espacio libre de la particiĂłn Windows"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Debe ingresar el nombre o la IP del host.\n"
+msgid "%s found on %s, configure it automatically?"
+msgstr "se encontrĂł %s en %s, Âżconfigurarlo automĂĄticamente?"
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
msgstr ""
-"Elija el host donde se deberĂ­an hacer disponibles los escĂĄneres locales:"
-
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid "Sharing of local scanners"
-msgstr "Compartir escĂĄneres locales"
+"Argumentos: (arg)\n"
+"\n"
+"Usar contraseña para autenticar usuarios."
-#: ../../standalone/scannerdrake:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "This machine"
-msgstr "Esta mĂĄquina"
+msgid "XFree86 driver: %s\n"
+msgstr "Controlador XFree86: %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove selected host"
-msgstr "Quitar host seleccionado"
+msgid "This host/network is already in the list, it cannot be added again.\n"
+msgstr "Este host/red ya estå en la lista, no se puede volver a añadir.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Edit selected host"
-msgstr "Editar host seleccionado"
+msgid ""
+"\n"
+" DrakBackup Report \n"
+"\n"
+msgstr ""
+"\n"
+" Reporte de DrakBackup \n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add host"
-msgstr "Añadir host"
+msgid "Choose the packages you want to install"
+msgstr "Elija los paquetes que desea instalar"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr ""
-"Estas son las mĂĄquinas desde las cuales deberĂ­an utilizarse los escĂĄneres:"
+msgid "Papua New Guinea"
+msgstr "PapĂșa Nueva Guinea"
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Usage of remote scanners"
-msgstr "Uso de escĂĄneres remotos"
+msgid "Serbian (cyrillic)"
+msgstr "Serbio (cirĂ­lico)"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "All remote machines"
-msgstr "Todas las mĂĄquinas remotas"
+msgid "Make kernel message quiet by default"
+msgstr "Predeterminadamente el mensaje del nĂșcleo es \"silencioso\""
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
msgstr ""
-"Estas son las mĂĄquinas en las cuales deberĂ­an estar disponibles los "
-"escĂĄneres conectados localmente:"
+"ÂżQuiere configurar esta impresora (\"%s\")\n"
+"como la impresora predeterminada?"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Use the scanners on hosts: "
-msgstr "Usar los escĂĄneres en los hosts:"
+msgid "The DHCP end range"
+msgstr "Fin del rango de DHCP"
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Use scanners on remote computers"
-msgstr "Usar los escĂĄneres en computadoras remotas"
+msgid "Creating bootdisk..."
+msgstr "Creando el disquete de arranque"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Compartir escĂĄneres en hosts: "
+msgid "Wait please, testing your connection..."
+msgstr "Por favor espere, probando su conexiĂłn..."
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr ""
-"Los escĂĄneres en esta mĂĄquina estĂĄn disponibles para otras computadoras"
+msgid "Bringing down the network"
+msgstr "Bajando la red"
-#: ../../standalone/scannerdrake:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
-"También puede decidir aquí si los escåneres en las måquinas remotas deberían "
-"estar disponibles automĂĄticamente en esta mĂĄquina."
+msgid "Login ID"
+msgstr "ID de conexiĂłn"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
msgstr ""
-"AquĂ­ puede elegir si los escĂĄneres conectados a esta mĂĄquina deberĂ­an poder "
-"accederse desde måquinas remotas y desde qué måquinas remotas."
+"NFS es un protocolo muy popular para compartir archivos en redes TCP/IP.\n"
+"Este servicio proporciona la funcionalidad de bloqueo de archivos por NFS."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Re-generating list of configured scanners ..."
-msgstr "Regenerando lista de escĂĄneres configurados ..."
+msgid "DHCP Client"
+msgstr "Cliente DHCP"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Searching for new scanners ..."
-msgstr "Buscando escĂĄneres nuevos..."
+msgid "dismiss"
+msgstr "rechazar"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for configured scanners ..."
-msgstr "Buscando escĂĄneres configurados ..."
+msgid "Printing/Scanning on \"%s\""
+msgstr "Imprimiendo/Escaneando en \"%s\""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Scanner sharing"
-msgstr "Compartir escĂĄner"
+msgid "omit raid modules"
+msgstr "omitir mĂłdulos raid"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
-msgid "Add a scanner manually"
-msgstr "Añadir un escåner manualmente"
+msgid ""
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
+msgstr ""
+"lpd es el demonio de impresiĂłn, necesario para que lpr funcione\n"
+"correctamente. BĂĄsicamente, es un servidor que coloca las tareas de\n"
+"impresiĂłn en las colas de impresiĂłn adecuadas para cada impresora."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Search for new scanners"
-msgstr "Buscar escĂĄneres nuevos"
+msgid "Internet Connection Configuration"
+msgstr "ConfiguraciĂłn de la conexiĂłn a Internet"
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr "No se encontraron escĂĄneres disponibles en su sistema.\n"
+msgid "comma separated numbers"
+msgstr "nĂșmeros separados por comas"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
msgstr ""
-"El siguiente escĂĄner\n"
-"\n"
-"%s\n"
-"estĂĄ disponible en su sistema.\n"
+"Una vez que seleccionĂł un dispositivo, podrĂĄ ver informaciĂłn sobre el mismo "
+"en los campos mostrados en el marco derecho (\"InformaciĂłn\")"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule up one level"
+msgstr "Subir un nivel la regla seleccionada"
#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"The following scanners\n"
+"The following scanner\n"
"\n"
"%s\n"
-"are available on your system.\n"
+"is available on your system.\n"
msgstr ""
-"Los siguiente escĂĄneres\n"
+"El siguiente escĂĄner\n"
"\n"
"%s\n"
-"estĂĄn disponibles en su sistema.\n"
-
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"Su %s ha sido configurado.\n"
-"Ahora puede escanear documentos usando \"XSane\" desde Multimedios/GrĂĄficos "
-"en el menĂș de aplicaciones."
+"estĂĄ disponible en su sistema.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "choose device"
-msgstr "elija el dispositivo"
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "ÂżSeguro que quiere borrar la impresora \"%s\"?"
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr "Por favor, seleccione el dispositivo donde estĂĄ conectado su %s"
+msgid "I can't find any room for installing"
+msgstr "No se puede encontrar nada de espacio para instalar"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for scanners ..."
-msgstr "Buscando escĂĄneres..."
+msgid "Default printer"
+msgstr "Impresora predeterminada"
-#: ../../standalone/scannerdrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Auto-detect available ports"
-msgstr "/Autodetectar puertos disponibles"
+msgid ""
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
+msgstr ""
+"Ha configurado mĂșltiples formas de conectarse a Internet.\n"
+"Seleccione la que quiere utilizar.\n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr "(Nota: no se pueden detectar automĂĄticamente los puertos paralelo)"
+msgid "Modify RAID"
+msgstr "Modificar el RAID"
-#: ../../standalone/scannerdrake:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
msgstr ""
-"Printerdrake debe configurar el %s.\n"
-"Puede lanzar printerdrake desde el Centro de control de Mandrake en la "
-"secciĂłn Hardware."
+"Se ha detectado una tarjeta RDSI PCI, pero no se conoce el tipo. Por favor, "
+"seleccione una tarjeta PCI en la pantalla siguiente."
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "The %s is unsupported"
-msgstr "El %s no estĂĄ soportado"
+msgid "Add user"
+msgstr "Añadir un usuario"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr "Esta versiĂłn de Scannerdrake deconoce al %s."
+msgid "RAID-disks %s\n"
+msgstr "Discos-RAID %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
-msgstr "El %s no estĂĄ soportado por esta versiĂłn de Mandrake Linux."
+msgid "Liberia"
+msgstr "Liberia"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Port: %s"
-msgstr "Puerto: %s"
+msgid ""
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
+msgstr ""
+"Por favor, ingrese el nombre de la Interfaz conectada a la Internet.\n"
+"\n"
+"Ejemplos:\n"
+"\t\tppp+ para conexiones por mĂłdem o DSL,\n"
+"\t\teth0, o eth1 para conexiĂłn por cable,\n"
+"\t\tippp+ para una conexiĂłn RDSI.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid ", "
-msgstr ", "
+msgid "Choose your keyboard"
+msgstr "Elija su teclado"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Detected model: %s"
-msgstr "Modelo detectado: %s"
+msgid "Format partitions"
+msgstr "Formateo de particiones"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " ("
-msgstr " ("
+msgid "Automatic correction of CUPS configuration"
+msgstr "CorrecciĂłn automĂĄtica de la configuraciĂłn de CUPS"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Select a scanner model"
-msgstr "Seleccione un modelo de escĂĄner"
+msgid "Running \"%s\" ..."
+msgstr "Ejecutando \"%s\" ..."
-#: ../../standalone/scannerdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr ""
-"%s no estĂĄ en la base de datos de escĂĄneres, Âżconfigurarlo manualmente?"
+msgid "enable radio support"
+msgstr "habilitar el soporte para radio"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "se encontrĂł %s en %s, Âżconfigurarlo automĂĄticamente?"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Hardware probing in progress"
-msgstr "DetecciĂłn de hardware en progreso"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices were added:\n"
-msgstr "Se agregaron algunos dispositivos:\n"
+msgid "Scanner sharing to hosts: "
+msgstr "Compartir escĂĄneres en hosts: "
-#: ../../standalone/service_harddrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "Se quitaron algunos dispositivos en la clase de hardware \"%s\":\n"
+msgid "Loopback file name: %s"
+msgstr "Nombre del archivo de loopback: %s"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
+msgid "Please choose the printer to which the print jobs should go."
msgstr ""
-"El Ă©xito de MandrakeSoft se basa en el principio del Software Libre. Su "
-"sistema operativo nuevo es el resultado del trabajo colaborativo de parte de "
-"la Comunidad Linux mundial"
-
-#: ../../share/advertising/01-thanks.pl:1
-#, c-format
-msgid "Welcome to the Open Source world."
-msgstr "Bienvenido al mundo del CĂłdigo Abierto"
+"Por favor, elija la impresora a la cual deberĂ­an ir los trabajos de "
+"impresiĂłn."
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr "Gracias por elegir Mandrake Linux 9.1"
+msgid "Do not transfer printers"
+msgstr "No transferir impresoras"
-#: ../../share/advertising/02-community.pl:1
-#, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
-msgstr ""
-"Para compartir su conocimiento y ayudar a construir herramientas Linux, "
-"Ășnase a los foros de discusiĂłn que encontrarĂĄ en nuestras pĂĄginas web para "
-"la \"Comunidad\""
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Delay before booting the default image"
+msgstr "Demora antes de arrancar la imagen predeterminada"
-#: ../../share/advertising/02-community.pl:1
-#, c-format
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+" DUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
msgstr ""
-"ÂżDesea saber mĂĄs acerca de la comunidad de CĂłdigo Abierto? Participe en el "
-"mundo del Software Libre!"
-
-#: ../../share/advertising/02-community.pl:1
-#, c-format
-msgid "Build the future of Linux!"
-msgstr "ÂĄConstruya el futuro de Linux!"
+"\n"
+" Copyright (C) 2001-2002 por MandrakeSoft \n"
+"\tDUPONT Sebastien (versiĂłn original)\n"
+" CHAUMETTE Damien dchaumette\\@mandrakesoft.com\n"
+"\n"
+" Este programa es software libre; lo puede redistribuir y/o modificar\n"
+" bajo los tĂ©rminos de la Licencia PĂșblica General GNU publicada por la\n"
+" Free Software Foundation; ya sea la versiĂłn 2, o (a su elecciĂłn)\n"
+" cualquier versiĂłn posterior.\n"
+"\n"
+" Este programa se distribuye con la esperanza que resultarĂĄ Ăștil, pero\n"
+" SIN GARANTÍA ALGUNA; incluso sin la garantía implícita de COMERCIABILIDAD\n"
+" o ADECUABILIDAD PARA UN PROPÓSITO PARTICULAR. Vea la Licencia PĂșblica\n"
+" General GNU para mĂĄs detalles.\n"
+"\n"
+" DeberĂ­a haber recibido una copia de la Licencia PĂșblica General GNU junto\n"
+" con este programa; de no ser asĂ­, escriba a la Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" Gracias:\n"
+" - pfm2afm: \n"
+"\t por Ken Borgendale:\n"
+"\t Convertir un archivo .pfm de Windows a uno .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t por James Macnicol: \n"
+"\t type1inst genera archivos fonts.dir fonts.scale y Fontmap.\n"
+" - ttf2pt1: \n"
+"\t por Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convertir archivos de tipografĂ­as ttf a tipografĂ­as afm y pfb\n"
+"\n"
+"\n"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
-msgstr ""
-"Mandrake Linux 9.1 le permite utilizar el Ășltimo software para reproducir "
-"archivos de audio, editar y organizar sus imĂĄgenes o fotos, y reproduzcir "
-"vĂ­deos"
+msgid "Please check for multisession CD"
+msgstr "Por favor, marque para CD multi-sesiĂłn"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
-msgstr ""
-"Navegue la web con Mozilla o Konqueror, lea su correo electrĂłnico con "
-"Evolution o KMail, cree sus documentos con OpenOffice.org."
+msgid "user"
+msgstr "usuario"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr "MandrakeSoft ha seleccionado el mejor software para Usted"
+msgid "Use Hard Disk to backup"
+msgstr "Usar el disco rĂ­gido para copia de respaldo"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
-"Mandrake Linux 9.1 le brinda el Centro de Control de Mandrake, una "
-"herramienta potente para adaptar por completo su computadora al uso que hace "
-"de la misma. Configure y personalice elementos tales como el nivel de "
-"seguridad, los periféricos (pantalla, ratón, teclado...), la conexión con la "
-"Internet, ÂĄy mucho mĂĄs!"
+msgid "Configure"
+msgstr "Configurar"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "Herramienta de configuraciĂłn multipropĂłsito de Mandrake"
+msgid "Scannerdrake"
+msgstr "Scannerdrake"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"Adapte perfectamente su computadora a sus necesidades gracias a las 11 "
-"interfaces de usuario de Mandrake Linux las cuales se pueden modificar por "
-"completo: KDE3.1, Gnome 2.2, WindowMaker..."
+"AtenciĂłn, se ha detectado otra conexiĂłn con la Internet, tal vez estĂĄ usando "
+"su red"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A customizable environment"
-msgstr "Un entorno personalizable"
+msgid "Backup Users"
+msgstr "Respaldar usuarios"
-#: ../../share/advertising/06-development.pl:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
msgstr ""
-"Modificar y crear en diferentes lenguajes tales como Perl, Python, C, C++ "
-"nunca ha sido tan fĂĄcil como ahora gracias a GNU gcc 3 y los mejores "
-"entornos de desarrollo Open Source."
-
-#: ../../share/advertising/06-development.pl:1
-#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr "Mandrake Linux 9.1 es la mejor plataforma de desarrollo."
+"Por favor, defina el nombre de su mĂĄquina.\n"
+"El nombre de su mĂĄquina deberĂ­a ser un nombre de mĂĄquina clasificado "
+"completamente,\n"
+"como \"mimaquina.milabo.micompa.com\".También puede introducir la dirección "
+"IP de la pasarela si tiene una"
-#: ../../share/advertising/07-server.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
-msgstr ""
-"Transforme su mĂĄquina en un servidor Linux potente con unos pocos clic del "
-"ratĂłn: servidor web, de correo, cortafuegos, router, servidor de archivos e "
-"impresoras, ..."
+msgid "Select Printer Spooler"
+msgstr "Seleccione sistema de impresiĂłn (spooler)"
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Turn your computer into a reliable server"
-msgstr "Convierta su mĂĄquina en un servidor confiable."
+msgid "Create new theme"
+msgstr "Crear un tema nuevo"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
-msgstr ""
-"Nuestro rango completo de soluciones Linux, así como también ofertas "
-"especiales sobre productos y otras \"cositas\", estĂĄn disponibles en lĂ­nea "
-"en nuestra tienda electrĂłnica:"
+msgid "Mandrake Tools Explanation"
+msgstr "Explicaciones de las herramientas de Mandrake"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "The official MandrakeSoft Store"
-msgstr "La tienda oficial de MandrakeSoft"
+msgid "No image found"
+msgstr "No se encontrĂł imagen"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
msgstr ""
-"Mejore el rendimiento de su computadora con la ayuda de una selecciĂłn de "
-"socios que ofrecen soluciones profesionales compatibles con Mandrake Linux"
+"Algunos paquetes importantes no fueron instalados correctamente.\n"
+"Seguramente su lector de CD o su CD de instalaciĂłn sean defectuosos.\n"
+"Compruebe el CD de instalaciĂłn en un sistema ya existente con el comando:\n"
+" rpm -qpl Mandrake/RPMS/*.rpm\n"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
-msgstr "Obtenga lo mejor con los socios estratégicos de Mandrake Linux"
+msgid "Detected model: %s"
+msgstr "Modelo detectado: %s"
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakedm:1
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
-"MandrakeSoft ha diseñado herramientas exclusivas para crear la versión de "
-"Linux mĂĄs segura jamĂĄs: DrakSec, una herramienta de administraciĂłn de la "
-"seguridad del sistema, y un cortafuegos potente se juntan para reducir "
-"drĂĄsticamente los riesgos de hacking."
+"El administrador de conexiĂłn X11 le permite conectarse grĂĄficamente\n"
+"a su sistema con el X Window System corriendo y soporta correr varias\n"
+"sesiones X diferentes en su mĂĄquina local a la vez."
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Optimize your security by using Mandrake Linux"
-msgstr "Optimice su seguridad"
+msgid "if set to yes, run the daily security checks."
+msgstr "si se pone en sĂ­, ejecutar las verificaciones de seguridad diarias."
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr "Este producto estĂĄ disponible en el sitio web MandrakeStore"
+msgid "Azerbaijan"
+msgstr "AzerbayĂĄn"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
-msgstr ""
-"Complete su configuraciĂłn de seguridad con este software fĂĄcil de usar que "
-"combina componentes de alto rendimiento tales como un cortafuegos, un "
-"servidor y cliente de red privada virtual (VPN), un sistema de detecciĂłn de "
-"intrusos y un administrador del trĂĄfico."
+msgid "No tape in %s!"
+msgstr "ÂĄNo hay cinta en %s!"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr "Haga seguras sus redes con el Multi Network Firewall"
+msgid "Dvorak (US)"
+msgstr "Dvorak (US)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""
-"Únase a los equipos de soporte de Mandrakesoft y de la Comunidad Linux en "
-"línea para compartir su conocimiento y ayudar a otros convirtiéndose en un "
-"Experto reconocido en el sitio web de soporte técnico en línea:"
+"esto es el bus fĂ­sico sobre el cual se conecta el dispositivo (ej.: PCI, "
+"USB, ...)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr ""
-"Encuentre las soluciones a sus problemas por medio de la plataforma de "
-"soporte en lĂ­nea de MandrakeSoft"
+msgid "How is the printer connected?"
+msgstr "ÂżCĂłmo estĂĄ conectada la impresora?"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Become a MandrakeExpert"
-msgstr "Conviértase en un MandrakeExpert"
+msgid "Security level"
+msgstr "Nivel de seguridad"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr ""
-"Todos los incidentes estarĂĄn seguidos por un Ășnico experto tĂ©cnico "
-"calificado de MandrakeSoft."
+msgid "final resolution"
+msgstr "resoluciĂłn final"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr ""
-"Una plataforma en lĂ­nea para responder a las necesidades especĂ­ficas de "
-"soporte de la compañía."
+msgid "Services"
+msgstr "Servicios"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "MandrakeExpert Corporativo"
+msgid "4 MB"
+msgstr "4 MB"
#: ../../share/compssUsers:999
msgid "Office Workstation"
@@ -19807,10 +19819,6 @@ msgstr ""
"de cĂĄlculo (kspread, gnumeric), visualizadores PDF, etc"
#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "EstaciĂłn de trabajo"
-
-#: ../../share/compssUsers:999
msgid "Game station"
msgstr "EstaciĂłn de Juegos"
@@ -19883,10 +19891,6 @@ msgstr ""
"herramientas que lo acompañan"
#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Entorno grĂĄfico"
-
-#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "EstaciĂłn de trabajo GNOME"
@@ -19907,10 +19911,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Desarrollo"
-
-#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "Bibliotecas de desarrollo C y C++, programas y archivos *.h"
@@ -19979,903 +19979,73 @@ msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr "Servidor NFS, servidor SMB, servidor proxy, servidor SSH"
#: ../../share/compssUsers:999
-msgid "Audio station"
-msgstr "EstaciĂłn de audio"
-
-#: ../../share/compssUsers:999
-msgid "Sound playing/editing programs"
-msgstr "Programas de reproducciĂłn/ediciĂłn de sonido"
-
-#: ../../share/compssUsers:999
-msgid "Video station"
-msgstr "EstaciĂłn de vĂ­deo"
-
-#: ../../share/compssUsers:999
-msgid "Video playing programs"
-msgstr "Programas de reproducciĂłn de vĂ­deo"
-
-#: ../../share/compssUsers:999
-msgid "Graphic station"
-msgstr "EstaciĂłn grĂĄfica"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs"
-msgstr "Programas para grĂĄficos"
-
-#: ../../share/compssUsers:999
msgid "Set of tools to read and send mail and news and to browse the Web"
msgstr ""
"Conjunto de herramientas para leer y enviar correo y noticias y para navegar "
"por la Web"
-#~ msgid "Printer sharing"
-#~ msgstr "Compartir impresora"
-
-#~ msgid ""
-#~ "Your printer belongs to the group of GDI laser printers (winprinters) "
-#~ "sold by different manufacturers which uses the Zenographics ZJ-stream "
-#~ "raster format for the data sent to the printer. The driver for these "
-#~ "printers is still in a very early development stage and so it will "
-#~ "perhaps not always work properly. Especially it is possible that the "
-#~ "printer only works when you choose the A4 paper size.\n"
-#~ "\n"
-#~ "Some of these printers, as the HP LaserJet 1000, for which this driver "
-#~ "was originally created, need their firmware to be uploaded to them after "
-#~ "they are turned on. In the case of the HP LaserJet 1000 you have to "
-#~ "search the printer's Windows driver CD or your Windows partition for the "
-#~ "file \"sihp1000.img\" and upload the file to the printer with one of the "
-#~ "following commands:\n"
-#~ "\n"
-#~ " lpr -o raw sihp1000.img\n"
-#~ " cat sihp1000.img > /dev/usb/lp0\n"
-#~ "\n"
-#~ "The first command can be given by any normal user, the second must be "
-#~ "given as root. After having done so you can print normally.\n"
-#~ msgstr ""
-#~ "Su impresora pertenece al grupo de impresoras lĂĄser GDI (winprinters) "
-#~ "vendidas por fabricantes diferentes que utilizan el formato raster "
-#~ "Zenographics ZJ-stream para los datos enviados a la impresora. El "
-#~ "controlador para estas impresoras todavĂ­a estĂĄ en una etapa muy temprana "
-#~ "de desarrollo y, en consecuencia puede no funcionar correctamente en "
-#~ "todos los casos. En especial, es posible que la impresora sĂłlo funcione "
-#~ "cuando Usted elige el tamaño de papel A4.\n"
-#~ "\n"
-#~ "Algunas de estas impresoras, como la HP LaserJet 1000, para la cual fue "
-#~ "creado este controlador, necesitan que se les cargue el firmware luego "
-#~ "que se encienden. En el caso de la HP LaserJet 1000 Usted tiene que "
-#~ "buscar en el CD de controladores Windows o en su particiĂłn Windows, el "
-#~ "archivo \"sihp1000.img\" y subir el archivo a la impresora con alguno de "
-#~ "los comandos siguientes:\n"
-#~ "\n"
-#~ " lpr -o raw sihp1000.img\n"
-#~ " cat sihp1000.img > /dev/usb/lp0\n"
-#~ "\n"
-#~ "El primer comando se puede realizar como usuario no privilegiado, el "
-#~ "segundo se debe realizar como root. Luego de hacer esto puede imprimir "
-#~ "normalmente.\n"
-
-#~ msgid "GDI Laser Printer using the Zenographics ZJ-Stream Format"
-#~ msgstr "Impresora lĂĄser GDI usando el formato Zenographics ZJ-Stream"
-
-#~ msgid "%s"
-#~ msgstr "%s"
-
-#~ msgid "Office"
-#~ msgstr "Oficina"
-
-#~ msgid "Set of tools for mail, news, web, file transfer, and chat"
-#~ msgstr ""
-#~ "Conjunto de herramientas para correo, noticias, web, transferencia de "
-#~ "archivos, y chat"
-
-#~ msgid "Games"
-#~ msgstr "Juegos"
-
-#~ msgid "Multimedia - Graphics"
-#~ msgstr "Multimedios - GrĂĄficos"
-
-#~ msgid "Multimedia - Sound"
-#~ msgstr "Multimedios - Sonido"
+#~ msgid "Internet connection & configuration"
+#~ msgstr "ConfiguraciĂłn y conexiĂłn a Internet"
-#~ msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-#~ msgstr "Herramientas de audio: reproductores mp3 o midi, mezcladores, etc"
+#~ msgid "Configure the connection"
+#~ msgstr "Configurar la conexiĂłn"
-#~ msgid "Multimedia - Video"
-#~ msgstr "Multimedios - VĂ­deo"
+#~ msgid "Disconnect"
+#~ msgstr "Desconectar"
-#~ msgid "Video players and editors"
-#~ msgstr "Reproductores y editores de vĂ­deo"
-
-#~ msgid "Multimedia - CD Burning"
-#~ msgstr "Multimedios - GrabaciĂłn de CD"
-
-#~ msgid "Tools to create and burn CD's"
-#~ msgstr "Herramientas para crear y grabar CDs"
-
-#~ msgid "More Graphical Desktops (Gnome, IceWM)"
-#~ msgstr "MĂĄs escritorios grĂĄficos (Gnome, IceWM)"
-
-#~ msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-#~ msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#~ msgid "Personal Information Management"
-#~ msgstr "AdministraciĂłn de la informaciĂłn personal"
-
-#~ msgid "Tools for your Palm Pilot or your Visor"
-#~ msgstr "Herramientas para su Palm Pilot o su Visor"
-
-#~ msgid "Personal Finance"
-#~ msgstr "Finanzas personales"
-
-#~ msgid "Programs to manage your finances, such as gnucash"
-#~ msgstr "Programas para administrar sus finanzas, tales como gnucash"
-
-#~ msgid "no network card found"
-#~ msgstr "no se encontrĂł ninguna tarjeta de red"
+#~ msgid "Connect"
+#~ msgstr "Conectar"
#~ msgid ""
-#~ "Mandrake Linux 9.1 has selected the best software for you. Surf the Web "
-#~ "and view animations with Mozilla and Konqueror, or read your mail and "
-#~ "handle your personal information with Evolution and Kmail"
-#~ msgstr ""
-#~ "Mandrake Linux 9.1 ha seleccionado el mejor software para Usted. Navegue "
-#~ "la web y vea animaciones con Mozilla y Konqueror, o lea su correo y "
-#~ "organice su informaciĂłn personal con Evolution y KMail"
-
-#~ msgid "Get the most from the Internet"
-#~ msgstr "Aprovechar al mĂĄximo la Internet"
-
-#~ msgid "Push multimedia to its limits!"
-#~ msgstr "ÂĄLleve los multimedios al lĂ­mite!"
-
-#~ msgid "Discover the most up-to-date graphical and multimedia tools!"
-#~ msgstr "ÂĄDescubra las herramientas grĂĄficas y multimedios mĂĄs actualizadas!"
-
-#~ msgid ""
-#~ "Mandrake Linux 9.1 provides the best Open Source games - arcade, action, "
-#~ "strategy, ..."
-#~ msgstr ""
-#~ "Mandrake Linux 9.1 brinda lo mejor en juegos de CĂłdigo Abierto - arcade, "
-#~ "acciĂłn, estrategia, ..."
-
-#~ msgid ""
-#~ "Mandrake Linux 9.1 provides a powerful tool to fully customize and "
-#~ "configure your machine"
-#~ msgstr ""
-#~ "Mandrake Linux 9.1 brinda una herramienta potente para personalizar y "
-#~ "configurar su mĂĄquina por completo."
-
-#~ msgid "User interfaces"
-#~ msgstr "Interfaces de usuario"
-
-#~ msgid ""
-#~ "Use the full power of the GNU gcc 3 compiler as well as the best Open "
-#~ "Source development environments"
-#~ msgstr ""
-#~ "Utilice el poder del compilador GNU gcc 3 así como también los mejores "
-#~ "entornos de desarrollo de CĂłdigo Abierto."
-
-#~ msgid "Development simplified"
-#~ msgstr "Desarrollo simplificado"
-
-#~ msgid ""
-#~ "This firewall product includes network features that allow you to fulfill "
-#~ "all your security needs"
-#~ msgstr ""
-#~ "Este producto cortafuegos incluye caracterĂ­sticas de red que le permiten "
-#~ "satisfacer todas sus necesidades de seguridad"
-
-#~ msgid ""
-#~ "The MandrakeSecurity range includes the Multi Network Firewall product (M."
-#~ "N.F.)"
-#~ msgstr ""
-#~ "MandrakeSecurity ofrece un rango que incluye el producto Multi Network "
-#~ "Firewall (M.N.F.)."
-
-#~ msgid "Strategic partners"
-#~ msgstr "Socios estratégicos"
-
-#~ msgid ""
-#~ "Whether you choose to teach yourself online or via our network of "
-#~ "training partners, the Linux-Campus catalogue prepares you for the "
-#~ "acknowledged LPI certification program (worldwide professional technical "
-#~ "certification)"
-#~ msgstr ""
-#~ "Ya sea si elige enseñarse a sí mismo en línea o a través de nuestra red "
-#~ "de socios de entrenamiento, el catĂĄlogo Linux-Campus lo prepara para el "
-#~ "reconocido programa de certificación LPT (certificación técnica "
-#~ "profesional a nivel mundial)."
-
-#~ msgid "Certify yourself on Linux"
-#~ msgstr "CertifĂ­quese en Linux."
-
-#~ msgid ""
-#~ "The training program has been created to respond to the needs of both end "
-#~ "users and experts (Network and System administrators)"
-#~ msgstr ""
-#~ "El programa de entrenamiento ha sido creado para responder a las "
-#~ "necesidades tanto de los usuarios finales como de los expertos "
-#~ "(AdministraciĂłn de sistemas y redes)"
-
-#~ msgid "Discover MandrakeSoft's training catalogue Linux-Campus"
-#~ msgstr "Descubra el catĂĄlogo Linux-Campus de entrenamiento de MandrakeSoft"
-
-#~ msgid ""
-#~ "MandrakeClub and Mandrake Corporate Club were created for business and "
-#~ "private users of Mandrake Linux who would like to directly support their "
-#~ "favorite Linux distribution while also receiving special privileges. If "
-#~ "you enjoy our products, if your company benefits from our products to "
-#~ "gain a competititve edge, if you want to support Mandrake Linux "
-#~ "development, join MandrakeClub!"
-#~ msgstr ""
-#~ "El Club de Mandrake y el Club Corporativo de Mandrake fueron creados para "
-#~ "las empresas y usuarios privados de Mandrake Linux que desean soportar "
-#~ "directamente a su distribuciĂłn Linux favorita a la vez que reciben "
-#~ "privilegios especiales. Si Usted disfruta nuestros productos, si su "
-#~ "empresa se beneficia con nuestros productos para ganar competitividad, si "
-#~ "desea soportar el desarrollo de Mandrake Linux, ÂĄĂșnase al Club de "
-#~ "Mandrake!"
-
-#~ msgid "Discover MandrakeClub and Mandrake Corporate Club"
-#~ msgstr "Descubra el Club de Mandrake y el Club Corporativo de Mandrake"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#~ msgid ""
-#~ "As a review, DrakX will present a summary of various information it has\n"
-#~ "about your system. Depending on your installed hardware, you may have "
-#~ "some\n"
-#~ "or all of the following entries:\n"
-#~ "\n"
-#~ " * \"Mouse\": check the current mouse configuration and click on the "
-#~ "button\n"
-#~ "to change it if necessary.\n"
-#~ "\n"
-#~ " * \"Keyboard\": check the current keyboard map configuration and click "
-#~ "on\n"
-#~ "the button to change that if necessary.\n"
-#~ "\n"
-#~ " * \"Country\": check the current country selection. If you are not in "
-#~ "this\n"
-#~ "country, click on the button and choose another one.\n"
-#~ "\n"
-#~ " * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-#~ "primary language you have chosen. But here, just as in your choice of a\n"
-#~ "keyboard, you may not be in a country to which the chosen language\n"
-#~ "corresponds. You may need to click on the \"Timezone\" button to\n"
-#~ "configure the clock for the correct timezone.\n"
-#~ "\n"
-#~ " * \"Printer\": clicking on the \"No Printer\" button will open the "
-#~ "printer\n"
-#~ "configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-#~ "Guide'' for more information on how to setup a new printer. The "
-#~ "interface\n"
-#~ "presented there is similar to the one used during installation.\n"
-#~ "\n"
-#~ " * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-#~ "click that button. This should be reserved to advanced users.\n"
-#~ "\n"
-#~ " * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-#~ "interface in \"800x600\" resolution. If that does not suits you, click "
-#~ "on\n"
-#~ "the button to reconfigure your graphical interface.\n"
-#~ "\n"
-#~ " * \"Network\": If you want to configure your Internet or local network\n"
-#~ "access now, you can by clicking on this button.\n"
-#~ "\n"
-#~ " * \"Sound card\": if a sound card is detected on your system, it is\n"
-#~ "displayed here. If you notice the sound card displayed is not the one "
-#~ "that\n"
-#~ "is actually present on your system, you can click on the button and "
-#~ "choose\n"
-#~ "another driver.\n"
-#~ "\n"
-#~ " * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-#~ "here. If you have a TV card and it is not detected, click on the button "
-#~ "to\n"
-#~ "try to configure it manually.\n"
-#~ "\n"
-#~ " * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-#~ "displayed here. You can click on the button to change the parameters\n"
-#~ "associated with the card."
-#~ msgstr ""
-#~ "A manera de revisiĂłn, DrakX presentarĂĄ un resumen de las distintas "
-#~ "informaciones\n"
-#~ "que tiene acerca de su sistema. Dependiendo del hardware instalado, puede "
-#~ "tener\n"
-#~ "algunas o todas las entradas siguientes:\n"
-#~ "\n"
-#~ " * \"RatĂłn\": verifique la configuraciĂłn del ratĂłn y haga clic sobre el\n"
-#~ "botĂłn para cambiarla, si es necesario.\n"
-#~ "\n"
-#~ " * \"Teclado\": verifique la configuraciĂłn de la disposiciĂłn del teclado "
-#~ "y\n"
-#~ "haga clic sobre el botĂłn para cambiarla, si es necesario.\n"
-#~ "\n"
-#~ " * \"PaĂ­s\": verifique la selecciĂłn corriente del paĂ­s. Si Usted no se "
-#~ "encuentra\n"
-#~ "en este paĂ­s, haga clic sobre el botĂłn y elija otro.\n"
-#~ "\n"
-#~ " * \"Huso horario\": De manera predeterminada, DrakX, deduce su huso "
-#~ "horario\n"
-#~ "basĂĄndose en el paĂ­s que ha elegido. Pero nuevamente, al igual\n"
-#~ "que con la elecciĂłn del teclado, puede ocurrir que no se encuentre en el\n"
-#~ "paĂ­s que sugiere el idioma elegido. De ser asĂ­, puede necesitar hacer "
-#~ "clic\n"
-#~ "sobre el botĂłn \"Huso horario\" para configurar el reloj de acuerdo al "
-#~ "huso\n"
-#~ "horario en el que se encuentre.\n"
-#~ "\n"
-#~ " * \"Impresora\": al hacer clic sobre el botĂłn \"Sin impresora\" se "
-#~ "abrirĂĄ\n"
-#~ "el asistente de configuraciĂłn de la impresora. Consulte el capĂ­tulo\n"
-#~ "correspondiente de la \"GuĂ­a de Comienzo\" para mĂĄs informaciĂłn sobre "
-#~ "como\n"
-#~ "configurar una impresora nueva. La interfaz presentada allĂ­ es similar a "
-#~ "la\n"
-#~ "utilizada durante la instalaciĂłn.\n"
-#~ "\n"
-#~ " * \"Cargador de arranque\": si desea cambiar la configuraciĂłn de su\n"
-#~ "cargador de arranque, haga clic sobre el botĂłn. Esto deberĂ­a estar "
-#~ "reservado\n"
-#~ " para usuarios avanzados. \n"
-#~ "* \"Interfaz grĂĄfica\": predeterminadamente, DrakX configura su interfaz\n"
-#~ "grĂĄfica en \"800x600\" de resoluciĂłn. Si eso no lo satisface, haga clic\n"
-#~ "sobre el botĂłn para volver a configurar su interfaz grĂĄfica.\n"
-#~ "\n"
-#~ "* \"Red\": si desea configurar la Internet o su acceso a la red local "
-#~ "ahora\n"
-#~ "puede hacerlo haciendo un clic sobre este botĂłn.\n"
-#~ "\n"
-#~ " * \"Tarjeta de sonido\": si se detecta una tarjeta de sonido en su\n"
-#~ "sistema, la misma se muestra aquĂ­. Si nota que la tarjeta de sonido\n"
-#~ "mostrada no es la que estĂĄ realmente presente en su mĂĄquina\n"
-#~ "puede hacer clic sobre el botĂłn y elegir otro controlador.\n"
-#~ "\n"
-#~ " * \"Tarjeta de TV\": si se detecta una tarjeta de TV en su sistema, la\n"
-#~ "misma se muestra aquĂ­. Si tiene una tarjeta de TV y no se detecta, haga "
-#~ "clic\n"
-#~ "sobre el botĂłn para intentar configurarla manualmente.\n"
-#~ "\n"
-#~ " * \"Tarjeta RDSI\": si se detecta una tarjeta RDSI en su sistema, la "
-#~ "misma\n"
-#~ "se muestra aquĂ­. Puede hacer clic sobre el botĂłn para cambiar los\n"
-#~ "parĂĄmetros asociados a la misma."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#~ msgid ""
-#~ "LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-#~ "automated. DrakX will analyze the disk boot sector and act according to\n"
-#~ "what it finds there:\n"
-#~ "\n"
-#~ " * if a Windows boot sector is found, it will replace it with a grub/"
-#~ "LILO\n"
-#~ "boot sector. This way you will be able to load either GNU/Linux or "
-#~ "another\n"
-#~ "OS.\n"
-#~ "\n"
-#~ " * if a grub or LILO boot sector is found, it will replace it with a new\n"
-#~ "one.\n"
#~ "\n"
-#~ "If it cannot make a determination, DrakX will ask you where to place the\n"
-#~ "bootloader.\n"
-#~ "\n"
-#~ "\"Boot device\": in most cases, you will not change the default (\"First\n"
-#~ "sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-#~ "installed on the second hard drive (\"/dev/hdb\"), or even on a floppy "
-#~ "disk\n"
-#~ "(\"On Floppy\").\n"
-#~ "\n"
-#~ "Checking \"Create a boot disk\" allows you to have a rescue boot media\n"
-#~ "handy.\n"
-#~ "\n"
-#~ "The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it "
-#~ "by\n"
-#~ "booting the CD-ROM, pressing the >> F1<< key at boot and typing "
-#~ ">>rescue<<\n"
-#~ "at the prompt. If your computer cannot boot from the CD-ROM, there are "
-#~ "at\n"
-#~ "least two situations where having a boot floppy is critical:\n"
-#~ "\n"
-#~ " * when installing the bootloader, DrakX will rewrite the boot sector "
-#~ "(MBR)\n"
-#~ "of your main disk (unless you are using another boot manager), to allow "
-#~ "you\n"
-#~ "to start up with either Windows or GNU/Linux (assuming you have Windows "
-#~ "on\n"
-#~ "your system). If at some point you need to reinstall Windows, the "
-#~ "Microsoft\n"
-#~ "install process will rewrite the boot sector and remove your ability to\n"
-#~ "start GNU/Linux!\n"
-#~ "\n"
-#~ " * if a problem arises and you cannot start GNU/Linux from the hard "
-#~ "disk,\n"
-#~ "this floppy will be the only means of starting up GNU/Linux. It contains "
-#~ "a\n"
-#~ "fair number of system tools for restoring a system that has crashed due "
-#~ "to\n"
-#~ "a power failure, an unfortunate typing error, a forgotten root password, "
-#~ "or\n"
-#~ "any other reason.\n"
-#~ "\n"
-#~ "If you say \"Yes\", you will be asked to insert a disk in the drive. The\n"
-#~ "floppy disk must be blank or have non-critical data on it - DrakX will\n"
-#~ "format the floppy and will rewrite the whole disk."
+#~ "You can reconfigure your connection."
#~ msgstr ""
-#~ "LILO y grub son cargadores de arranque de GNU/Linux. Normalmente esta\n"
-#~ "etapa estĂĄ completamente automatizada. DrakX analizarĂĄ el sector de "
-#~ "arranque\n"
-#~ "del disco y actuarĂĄ de acuerdo a lo que encuentra allĂ­:\n"
-#~ "\n"
-#~ "* se encuentra un sector de arranque de Windows, lo reemplazarĂĄ con uno "
-#~ "de\n"
-#~ "grub/LILO. De esta forma, Usted podrĂĄ cargar bien GNU/Linux o bien otro\n"
-#~ "sistema operativo.\n"
-#~ "\n"
-#~ "* si encuentra un sector de arranque de grub o LILO, lo reemplazarĂĄ con\n"
-#~ "uno nuevo.\n"
-#~ "\n"
-#~ "Si no puede realizar una determinaciĂłn, DrakX le preguntarĂĄ dĂłnde "
-#~ "colocar\n"
-#~ "el cargador de arranque.\n"
-#~ "\n"
-#~ "\"Dispositivo de arranque\": en la mayorĂ­a de los casos, no deberĂĄ "
-#~ "cambiar\n"
-#~ "lo predeterminado (\"Primer sector del disco (MBR)\"), pero si lo "
-#~ "prefiere,el\n"
-#~ "administrador de arranque se puede instalar en el segundo disco o "
-#~ "incluso\n"
-#~ "en un disquete (\"En disquete\")\n"
-#~ "\n"
-#~ "Marcar \"Crear un disquete de arranque\" le permite tener un disco de "
-#~ "rescate\n"
-#~ "a mano.\n"
-#~ "\n"
-#~ "El CD-ROM de Mandrake Linux tiene un modo de rescate incorporado. Puede\n"
-#~ "acceder al mismo arrancando el CD-ROM, presionando la tecla >>F1<< y\n"
-#~ "tecleando >>rescue<< en el prompt. Si su computadora no puede arrancar\n"
-#~ "desde el CD-ROM, hay al menos dos situaciones donde es crĂ­tico tener\n"
-#~ "un disquete de arranque:\n"
-#~ "\n"
-#~ " * cuando instala el cargador de arranque, DrakX sobreescribirĂĄ el MBR\n"
-#~ "de su disco principal (a menos que use otro administrador de arranque) "
-#~ "para\n"
-#~ "permitirle arrancar Windows o GNU/Linux (si es que tiene Windows en su\n"
-#~ "sistema) Si necesita volver a instalar Windows, el proceso de "
-#~ "instalaciĂłn\n"
-#~ "de Microsoft sobreescribirĂĄ el sector de arranque y ÂĄle quitarĂĄ la "
-#~ "posibilidad\n"
-#~ "de arrancar GNU/LInux! * si surge un problema y no puede arrancar GNU/"
-#~ "Linux desde el disco,\n"
-#~ "este disquete serĂĄ la Ășnica forma para arrancar GNU/Linux. El mismo "
-#~ "contiene\n"
-#~ "una cantidad de herramientas del sistema para restaurar un sistema que "
-#~ "cayĂł\n"
-#~ "debido a una falla de energĂ­a, un error infortunado de tecleo, una "
-#~ "contraseña de\n"
-#~ "root olvidada, o cualquier otra razĂłn.\n"
#~ "\n"
-#~ "Si dice \"SĂ­\", se le pedirĂĄ que inserte un disquete en la disquetera. "
-#~ "El\n"
-#~ "disquete debe estar vacĂ­o o tener datos no crĂ­ticos. DrakX formatearĂĄ\n"
-#~ "el disquete y lo sobreescribirĂĄ por completo."
+#~ "Puede volver a configurar su conexiĂłn."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
#~ msgid ""
-#~ "Checking \"Create a boot disk\" allows you to have a rescue boot media\n"
-#~ "handy.\n"
-#~ "\n"
-#~ "The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it "
-#~ "by\n"
-#~ "booting the CD-ROM, pressing the >> F1<< key at boot and typing "
-#~ ">>rescue<<\n"
-#~ "at the prompt. If your computer cannot boot from the CD-ROM, there are "
-#~ "at\n"
-#~ "least two situations where having a boot floppy is critical:\n"
-#~ "\n"
-#~ " * when installing the bootloader, DrakX will rewrite the boot sector "
-#~ "(MBR)\n"
-#~ "of your main disk (unless you are using another boot manager), to allow "
-#~ "you\n"
-#~ "to start up with either Windows or GNU/Linux (assuming you have Windows "
-#~ "on\n"
-#~ "your system). If at some point you need to reinstall Windows, the "
-#~ "Microsoft\n"
-#~ "install process will rewrite the boot sector and remove your ability to\n"
-#~ "start GNU/Linux!\n"
#~ "\n"
-#~ " * if a problem arises and you cannot start GNU/Linux from the hard "
-#~ "disk,\n"
-#~ "this floppy will be the only means of starting up GNU/Linux. It contains "
-#~ "a\n"
-#~ "fair number of system tools for restoring a system that has crashed due "
-#~ "to\n"
-#~ "a power failure, an unfortunate typing error, a forgotten root password, "
-#~ "or\n"
-#~ "any other reason.\n"
-#~ "\n"
-#~ "If you say \"Yes\", you will be asked to insert a disk in the drive. The\n"
-#~ "floppy disk must be blank or have non-critical data on it - DrakX will\n"
-#~ "format the floppy and will rewrite the whole disk."
+#~ "You can connect to the Internet or reconfigure your connection."
#~ msgstr ""
-#~ "Marcando \"Crear disquete de arranque\" le permite tener un disquete de\n"
-#~ "arranque de rescate a mano.\n"
-#~ "\n"
-#~ "El CD-ROM de Mandrake Linux tiene un modo de rescate incorporado. Usted\n"
-#~ "puede acceder al mismo arrancando desde el CD-ROM, presionando la tecla\n"
-#~ ">>F1<< durante el arranque y tecleando >>rescue<< en el prompt. Si su\n"
-#~ "computadora no pueda arrancar desde el CD-ROM, Usted deberĂ­a recurrir a\n"
-#~ "este paso al menos en dos situaciones:\n"
-#~ "\n"
-#~ " * cuando instala el cargador de arranque, DrakX sobreescribirĂĄ el "
-#~ "sector\n"
-#~ "de arranque (MBR) de su disco principal (a menos que esté utilizando "
-#~ "otro\n"
-#~ "administrador de arranque) de forma tal que pueda iniciar o bien Windows "
-#~ "o\n"
-#~ "bien GNU/Linux (asumiendo que tiene Windows en su sistema). Si necesita\n"
-#~ "volver a instalar Windows, el proceso de instalaciĂłn de Microsoft\n"
-#~ "sobreescribirĂĄ el sector de arranque, y entonces ÂĄUsted no podrĂĄ iniciar\n"
-#~ "GNU/Linux!\n"
#~ "\n"
-#~ " * si surge un problema y Usted no puede iniciar GNU/Linux desde el "
-#~ "disco\n"
-#~ "rĂ­gido, este disquete serĂĄ la Ășnica manera de iniciar GNU/Linux. El "
-#~ "mismo\n"
-#~ "contiene una buena cantidad de herramientas del sistema para restaurar "
-#~ "un\n"
-#~ "sistema que colapsĂł debido a una falla de energĂ­a, un error de tecleo\n"
-#~ "infortunado, un error en una contraseña, o cualquier otro motivo.\n"
-#~ "\n"
-#~ "Si dice \"SĂ­\", se le pedirĂĄ que inserte un disquete dentro de la\n"
-#~ "disquetera. El disquete que inserte debe estar vacĂ­o o contener datos "
-#~ "que\n"
-#~ "no necesite. No tendrĂĄ que formatearlo ya que DrakX sobreescribirĂĄ el\n"
-#~ "disquete por completo."
+#~ "Se puede conectar a Internet o volver a configurar su conexiĂłn."
-#~ msgid ""
-#~ "The following printers are configured. Double-click on a printer to "
-#~ "change its settings; to make it the default printer; to view information "
-#~ "about it; or to make a printer on a remote CUPS server available for Star "
-#~ "Office/OpenOffice.org/GIMP."
-#~ msgstr ""
-#~ "EstĂĄn configuradas las impresoras siguientes. Haga doble clic sobre una "
-#~ "para cambiar sus parĂĄmetros; para hacerla la predeterminada; para ver "
-#~ "informaciĂłn acerca de la misma o para hacer que una impresora en un "
-#~ "servidor CUPS remoto esté disponible para Star Office/OpenOffice.org/GIMP."
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "Ahora no estĂĄ conectado a Internet."
#~ msgid ""
-#~ "Please enter your host name if you know it.\n"
-#~ "Some DHCP servers require the hostname to work.\n"
-#~ "Your host name should be a fully-qualified host name,\n"
-#~ "such as ``mybox.mylab.myco.com''."
-#~ msgstr ""
-#~ "Por favor introduzca el nombre de su mĂĄquina (host) si lo conoce.\n"
-#~ "Algunos servidores DHCP necesitan del nombre de la mĂĄquina para "
-#~ "funcionar.\n"
-#~ "El nombre de su mĂĄquina deberĂ­a ser un nombre de mĂĄquina clasificado "
-#~ "completamente,\n"
-#~ "como \"mimaquina.milabo.micompa.com\"."
-
-#~ msgid "DrakFloppy Error: %s"
-#~ msgstr "Error de DrakFloppy: %s"
-
-#~ msgid "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"
-#~ msgstr "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"
-
-#~ msgid "Launch Aurora at boot time"
-#~ msgstr "Iniciar Aurora en el momento del arranque"
-
-#~ msgid "Traditional Gtk+ Monitor"
-#~ msgstr "Monitor tradicional Gtk+"
-
-#~ msgid "Traditional Monitor"
-#~ msgstr "Monitor tradicional"
-
-#~ msgid "NewStyle Monitor"
-#~ msgstr "Monitor de estilo nuevo"
-
-#~ msgid "NewStyle Categorizing Monitor"
-#~ msgstr "Monitor categorizante de estilo nuevo"
-
-#~ msgid "Secure Connection"
-#~ msgstr "ConexiĂłn segura"
-
-#~ msgid "FTP Connection"
-#~ msgstr "ConexiĂłn FTP"
-
-#~ msgid "Mail/Groupware/News"
-#~ msgstr "Servidor, Correo/Groupware/Noticias"
-
-#~ msgid "Postfix mail server, Inn news server"
-#~ msgstr "Servidor de correo Postfix, servidor de noticias Inn"
-
-#~ msgid "/Options"
-#~ msgstr "/Opciones"
-
-#~ msgid "/Autodetect jazz drives"
-#~ msgstr "/Autodetectar unidades jazz"
-
-#~ msgid "/Autodetect modems"
-#~ msgstr "/Autodetectar mĂłdems"
-
-#~ msgid "/Autodetect printers"
-#~ msgstr "/Autodetectar impresoras"
-
-#~ msgid ""
-#~ "The partition you've selected to add as root (/) is physically located "
-#~ "beyond\n"
-#~ "the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-#~ "If you plan to use the LILO boot manager, be careful to add a /boot "
-#~ "partition"
-#~ msgstr ""
-#~ "La particiĂłn que escogiĂł para usar como raĂ­z (/) estĂĄ fĂ­sicamente "
-#~ "ubicada\n"
-#~ "despuĂ©s del 1024Âș cilindro del disco rĂ­gido, y no tiene particiĂłn /boot.\n"
-#~ "Si piensa usar el cargador de arranque LILO, tenga en cuenta que tiene\n"
-#~ "que añadir una partición /boot"
-
-#~ msgid ""
-#~ "Sorry I won't accept to create /boot so far onto the drive (on a cylinder "
-#~ "> 1024).\n"
-#~ "Either you use LILO and it won't work, or you don't use LILO and you "
-#~ "don't need /boot"
-#~ msgstr ""
-#~ "Disculpe, pero no se permite la creaciĂłn de una particiĂłn /boot tan "
-#~ "lejos\n"
-#~ "en el disco (en un cilindro > 1024). Puede usar lilo LILO (y es probable "
-#~ "que\n"
-#~ "no funcione), o bien no utiliza LILO (y entonces no necesita /boot)"
-
-#~ msgid "Upgrade"
-#~ msgstr "ActualizaciĂłn"
-
-#~ msgid "192.168.100.0/255.255.255.0\n"
-#~ msgstr "192.168.100.0/255.255.255.0\n"
-
-#~ msgid "192.168.100.0/24\n"
-#~ msgstr "192.168.100.0/24\n"
-
-#~ msgid "10.1.*\n"
-#~ msgstr "10.1.*\n"
-
-#~ msgid "10.0.0.*\n"
-#~ msgstr "10.0.0.*\n"
-
-#~ msgid "192.168.100.194\n"
-#~ msgstr "192.168.100.194\n"
-
-#~ msgid "Do you want to configure another printer?"
-#~ msgstr "ÂżDesea configurar otra impresora?"
-
-#~ msgid "Know how to use this printer"
-#~ msgstr "Se sabe cĂłmo usar esta impresora"
-
-#~ msgid "Preparing Printerdrake..."
-#~ msgstr "Preparando a Printerdrake ..."
-
-#~ msgid ""
-#~ "if set to yes, check for empty password, or a password while it should be "
-#~ "in /etc/shadow or other users with id 0."
-#~ msgstr ""
-#~ "si se pone en sí, verificar contraseña vacía, o si una contraseña debería "
-#~ "estar en /etc/shadow u otros usuarios con id 0."
-
-#~ msgid "Reading printer data ..."
-#~ msgstr "Leyendo los datos de la impresora ..."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#~ msgid ""
-#~ "You must indicate where you wish to place the information required to "
-#~ "boot\n"
-#~ "GNU/Linux.\n"
#~ "\n"
-#~ "Unless you know exactly what you are doing, choose \"First sector of "
-#~ "drive\n"
-#~ "(MBR)\"."
+#~ "You can disconnect or reconfigure your connection."
#~ msgstr ""
-#~ "Debe indicar donde desea colocar la informaciĂłn necesaria para arrancar "
-#~ "en\n"
-#~ "GNU/Linux.\n"
#~ "\n"
-#~ "A menos que sepa exactamente lo que estĂĄ haciendo, elija \"Primer sector\n"
-#~ "del disco (MBR)\"."
+#~ "Puede desconectarse o volver a configurar su conexiĂłn."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#~ msgid ""
-#~ "DrakX now needs to know if you want to perform a default (\"Recommended"
-#~ "\")\n"
-#~ "installation or if you want to have greater control (\"Expert\") over "
-#~ "your\n"
-#~ "installation. You can also choose to do a new installation or upgrade "
-#~ "your\n"
-#~ "existing Mandrake Linux system:\n"
-#~ "\n"
-#~ " * \"Install\": completely wipes out the old system. However, depending "
-#~ "on\n"
-#~ "what is currently installed on your machine, you may be able to keep "
-#~ "some\n"
-#~ "old partitions (Linux or otherwise) unchanged;\n"
-#~ "\n"
-#~ " * \"Upgrade\": this installation class allows to simply update the\n"
-#~ "packages currently installed on your Mandrake Linux system. It keeps "
-#~ "your\n"
-#~ "hard drives' current partitions as well as user configurations. All "
-#~ "other\n"
-#~ "configuration steps remain available, similar to a normal installation;\n"
-#~ "\n"
-#~ " * \"Upgrade Packages Only\": this new installation class allows you to\n"
-#~ "upgrade an existing Mandrake Linux system while keeping all system\n"
-#~ "configurations unchanged. Adding new packages to the current "
-#~ "installation\n"
-#~ "is also possible.\n"
-#~ "\n"
-#~ "Upgrades should work fine on Mandrake Linux systems using version \"8.1"
-#~ "\"\n"
-#~ "or later.\n"
-#~ "\n"
-#~ "Depending on your GNU/Linux knowledge, select one of the following "
-#~ "choices:\n"
-#~ "\n"
-#~ " * Recommended: choose this if you have never installed a GNU/Linux\n"
-#~ "operating system. The installation will be very easy and you will only "
-#~ "be\n"
-#~ "asked a few questions;\n"
-#~ "\n"
-#~ " * Expert: if you have a good GNU/Linux understanding, you may wish to\n"
-#~ "perform a highly customized installation. Some of the decisions you will\n"
-#~ "have to make may be difficult if you do not have good GNU/Linux "
-#~ "knowledge,\n"
-#~ "so it is not recommended that those without a fair amount of experience\n"
-#~ "select this installation class."
-#~ msgstr ""
-#~ "DrakX ahora necesita saber si desea realizar una instalaciĂłn por defecto\n"
-#~ "(\"Recomendada\") o si desea tener un control mayor (\"Experto\"). "
-#~ "También\n"
-#~ "puede elegir realizar una instalaciĂłn nueva o una actualizaciĂłn de un\n"
-#~ "sistema Mandrake Linux existente:\n"
-#~ "\n"
-#~ " * \"Instalar\": el sistema anterior se borrarĂĄ por completo, sin "
-#~ "embargo,\n"
-#~ "dependiendo de lo que su mĂĄquina contiene actualmente, podrĂĄ mantener\n"
-#~ "algunas particiones antiguas (Linux u otras) sin cambios;\n"
-#~ "\n"
-#~ " * \"ActualizaciĂłn\": esta clase de instalaciĂłn le permite simplemente\n"
-#~ "actualizar los paquetes que en este momento estĂĄn instalados en su "
-#~ "sistema\n"
-#~ "Mandrake Linux. La misma mantiene las particiones corrientes de sus "
-#~ "discos\n"
-#~ "así como también las configuraciones de usuarios. Todos los otros pasos "
-#~ "de\n"
-#~ "instalaciĂłn permanecen disponibles, de manera similar a lo que ocurre "
-#~ "con\n"
-#~ "una instalaciĂłn normal;\n"
-#~ "\n"
-#~ " * \"SĂłlo actualizar paquetes\": esta clase nueva de instalaciĂłn le "
-#~ "permite\n"
-#~ "actualizar un sistema Mandrake Linux existente a la vez que mantiene sin\n"
-#~ "cambios todas las configuraciones del sistema. También es posible añadir\n"
-#~ "paquetes nuevos a la instalaciĂłn corriente.\n"
-#~ "\n"
-#~ "Las actualizaciones deberĂ­an funcionar sin problemas para los sistemas\n"
-#~ "Mandrake Linux que contienen la versiĂłn \"8.1\" o una posterior.\n"
-#~ "\n"
-#~ "Dependiendo de su conocimiento de GNU/Linux, elija una de las opciones\n"
-#~ "siguientes:\n"
-#~ "\n"
-#~ " * Recomendada: elija esta si nunca ha instalado un sistema operativo\n"
-#~ "GNU/Linux. La instalaciĂłn serĂĄ muy fĂĄcil y sĂłlo se le formularĂĄn unas "
-#~ "pocas\n"
-#~ "preguntas;\n"
-#~ "\n"
-#~ " * Experto: si tiene un conocimiento bueno de GNU/Linux, puede que desee\n"
-#~ "realizar una instalaciĂłn altamente personalizada. Algunas de las "
-#~ "decisiones\n"
-#~ "que tendrĂĄ que realizar pueden resultar difĂ­ciles si no tiene un buen\n"
-#~ "conocimiento de GNU/Linux, por lo tanto, no se recomienda que aquellos "
-#~ "sin\n"
-#~ "una cantidad importante de experiencia elijan esta clase de instalaciĂłn.\n"
-#~ "\n"
-#~ "Este manual documentarĂĄ la instalaciĂłn completa de tipo \"Experto\" Si\n"
-#~ "elige la clase de instalaciĂłn \"Recomendada\", simplemente ignore los "
-#~ "pasos\n"
-#~ "que se presentan aquĂ­ que sĂłlo se aplican a la clase de instalaciĂłn\n"
-#~ "\"Experto\"."
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "Ahora estĂĄ conectado a Internet."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#~ msgid "Please be patient. This operation can take several minutes."
-#~ msgstr ""
-#~ "Por favor, tenga paciencia. Esta operaciĂłn puede tomar varios minutos."
+#~ msgid "files sending by FTP"
+#~ msgstr "EnvĂ­o de archivos por FTP"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#~ msgid ""
-#~ "Your new Mandrake Linux operating system is currently being installed.\n"
-#~ "Depending on the number of packages you will be installing and the speed "
-#~ "of\n"
-#~ "your computer, this operation could take from a few minutes to a\n"
-#~ "significant amount of time.\n"
-#~ "\n"
-#~ "Please be patient."
-#~ msgstr ""
-#~ "En este momento se estĂĄ instalando su sistema operativo Mandrake Linux\n"
-#~ "nuevo. Dependiendo de la cantidad de paquetes que instalarĂĄ y de la\n"
-#~ "velocidad de su computadora, esta operaciĂłn puede tomar desde unos pocos\n"
-#~ "minutos hasta una cantidad de tiempo significativa.\n"
-#~ "\n"
-#~ "Por favor, tenga paciencia."
+#~ msgid "Use incremental backup (do not replace old backups)"
+#~ msgstr "Usar repaldo incremental (no reemplazar respaldos antiguos)"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#~ msgid ""
-#~ "X (for X Window System) is the heart of the GNU/Linux graphical "
-#~ "interface\n"
-#~ "on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-#~ "WindowMaker, etc.) bundled with Mandrake Linux rely.\n"
-#~ "\n"
-#~ "You will be presented the list of available resolutions and color depth\n"
-#~ "available for your hardware. Choose the one that best suit your needs "
-#~ "(you\n"
-#~ "will be able to change that after installation though). When you are\n"
-#~ "satisfied with the sample shown in the monitor, click \"OK\". A window "
-#~ "will\n"
-#~ "then appear and ask you if you can see it.\n"
-#~ "\n"
-#~ "If you are doing an \"Expert\" installation, you will enter the X\n"
-#~ "configuration wizard. See the corresponding section of the manual for "
-#~ "more\n"
-#~ "information about this wizard.\n"
-#~ "\n"
-#~ "If you can see the message during the test, and answer \"Yes\", then "
-#~ "DrakX\n"
-#~ "will proceed to the next step. If you cannot see the message, it simply\n"
-#~ "means that the configuration was wrong and the test will automatically "
-#~ "end\n"
-#~ "after 10 seconds, restoring the screen. Refer then to the video\n"
-#~ "configuration section of the user guide for more information on how to\n"
-#~ "configure your display."
-#~ msgstr ""
-#~ "X (por X Window System) es el corazĂłn de la interfaz grĂĄfica de GNU/"
-#~ "Linux\n"
-#~ "en el que se apoyan todos los entornos grĂĄficos (KDE, GNOME, AfterStep,\n"
-#~ "WindowMaker, etc.) que se incluyen con Mandrake Linux. En esta secciĂłn,\n"
-#~ "DrakX intentarĂĄ configurar a X automĂĄticamente.\n"
-#~ "\n"
-#~ "Es extremadamente raro que esto falle, a menos que el hardware sea muy\n"
-#~ "antiguo (o muy nuevo). Si no falla, arrancarĂĄ X automĂĄticamente con la\n"
-#~ "mejor resolución posible dependiendo del tamaño de su monitor. Luego\n"
-#~ "aparecerĂĄ una ventana que le pregunta si la puede ver.\n"
-#~ "\n"
-#~ "Si estĂĄ haciendo una instalaciĂłn en modo \"Experto\", ingresarĂĄ al\n"
-#~ "asistente de configuraciĂłn de X. Para mĂĄs informaciĂłn sobre este "
-#~ "asistente\n"
-#~ "vea la secciĂłn correspondiente del manual.\n"
-#~ "\n"
-#~ "Si puede ver el mensaje durante la prueba, y responde \"SĂ­\", entonces\n"
-#~ "DrakX continuarĂĄ con el paso siguiente. Si no puede ver el mensaje,\n"
-#~ "simplemente significa que la configuraciĂłn no era la correcta y la "
-#~ "prueba\n"
-#~ "terminarĂĄ automĂĄticamente luego de 10 segundos, restaurando la pantalla.\n"
-#~ "Consulte la secciĂłn de configuraciĂłn de vĂ­deo de la guĂ­a del usuario "
-#~ "para\n"
-#~ "mĂĄs informaciĂłn sobre como configurar su pantalla."
+#~ msgid "Relaunch 'lilo'"
+#~ msgstr "Volver a ejecutar 'lilo'"
+
+#~ msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+#~ msgstr "Construir initrd mkinitrd -f /boot/initrd-%s.img %s."
-#~ msgid "Switching between ALSA and OSS help"
-#~ msgstr "Ayuda para cambiar entre ALSA y OSS"
+#~ msgid "Write %s"
+#~ msgstr "Escribir %s"
-#~ msgid "quit"
-#~ msgstr "salir"
+#~ msgid "Copy %s to %s"
+#~ msgstr "Copiar %s a %s"
-#~ msgid "save"
-#~ msgstr "guardar"
+#~ msgid "Backup %s to %s.old"
+#~ msgstr "Copiar %s a %s.old"
-#~ msgid "Detecting devices ..."
-#~ msgstr "Detectando dispositivos..."
+#~ msgid "ttf fonts conversion"
+#~ msgstr "ConversiĂłn de tipografĂ­as TTF"
-#~ msgid "Test ports"
-#~ msgstr "Probar puertos"
+#~ msgid "Fonts conversion"
+#~ msgstr "ConversiĂłn de tipografĂ­as"
diff --git a/perl-install/share/po/et.po b/perl-install/share/po/et.po
index 177282092..e088ac2e4 100644
--- a/perl-install/share/po/et.po
+++ b/perl-install/share/po/et.po